WorldWideScience

Sample records for isr construction department

  1. GLOBAL INTEGRATED ISR: A BETTER ORGANIZATIONAL CONSTRUCT FOR AIR FORCE LD/HD ISR

    Science.gov (United States)

    2017-04-06

    E-8 intelligence, surveillance, and reconnaissance (ISR) aircraft it refers to as Low Density/High Demand (LD/HD). Current worldwide demand for LD...would allow for the easy flow of missions across CCMD boundaries within, or even inside, the normal book process timeline without having to approach...Quarter 2007). Harvard , James W. "Airmen and Mission Command." Air and Space Power Journal, March - April 2013: 131-146. Headquarters Air Force, Air

  2. ISR RF cavities

    CERN Multimedia

    1983-01-01

    In each ISR ring the radiofrequency cavities were installed in one 9 m long straight section. The RF system of the ISR had the main purpose to stack buckets of particles (most of the time protons)coming from the CPS and also to accelerate the stacked beam. The installed RF power per ring was 18 kW giving a peak accelerating voltage of 20 kV. The system had a very fine regulation feature allowing to lower the voltage down to 75 V in a smooth and well controlled fashion.

  3. ISR "Terwilliger" Quadrupole

    CERN Multimedia

    1983-01-01

    There were 48 of these Quadrupoles in the ISR. They were distributed around the rings according to the so-called Terwilliger scheme. Their aperture was 184 mm, their core length 300 mm, their gradient 5 T/m. Due to their small length as compared to the aperture, the end fringe field errors had to be compensated by suitably shaping the poles.

  4. ISR vacuum system

    CERN Multimedia

    CERN PhotoLab

    1970-01-01

    A pressure of 5 x 10-11 Torr has been obtained repreatedly in this pilot section of the ISR vacuum system. The pilot section is 45 m long is pumped by 9 sputter-ion pumps pf 350 l/s pumping speed, and is baked out at 200 degrees C before each pump down.

  5. ISR magnet model

    CERN Multimedia

    CERN PhotoLab

    1965-01-01

    Field measurements being made on the ISR magnet model. In the foreground, the poleface windings can be seen - as distinct from the large exciting coils - together with their supply cables. These windings are mainly used to compensate the saturation effects at high fields. The steel plates forming the yoke are welded together along the whole length of the magnet.

  6. ISR intersection I-2

    CERN Multimedia

    CERN PhotoLab

    1972-01-01

    Towards the left one sees, on top of ISR beam 1, the front section of the 30-metre-long, small-angle spectrometer from the CERN-Holland-Lancaster-Manchester single-particle production experiment. It consists of two special septum magnets carrying up to 20 kA each. These magnets are necessary to force charged particles produced at small angles away from the ISR beam. They are followed by two threshold Cerenkov counters and (not visible) three more bending magnets and a 6-metre-long Cerenkov counter. Particle identification follows from the Cerenkov signals after determination of the particle trajectory through the spectrometer with magnetostrictive spark chambers. The positions of the first magnets and Cerenkov counters can be changed by remote control. In front one sees the electronics which determines the traversal of a charged particle from scintillator counter signals and gives the "fire" signal for the spark chambers.

  7. Department of Energy Construction Safety Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    DOE has adopted the Occupational Safety and Health Administration (OSHA) regulations Title 29 Code of Federal Regulations (CFR) 1926 ``Safety and Health Regulations for Construction,`` and related parts of 29 CFR 1910, ``Occupational Safety and Health Standards.`` This nonmandatory reference guide is based on these OSHA regulations and, where appropriate, incorporates additional standards, codes, directives, and work practices that are recognized and accepted by DOE and the construction industry. It covers excavation, scaffolding, electricity, fire, signs/barricades, cranes/hoists/conveyors, hand and power tools, concrete/masonry, stairways/ladders, welding/cutting, motor vehicles/mechanical equipment, demolition, materials, blasting, steel erection, etc.

  8. ISR Sextupole Magnet

    CERN Multimedia

    1983-01-01

    The 32 correction 6-pole magnets had the special feature of having an asymmetric aperture of 192 mm (horizontal) x 112 mm (vertical), the two central poles having been brought closer to the ISR elliptical vacuum chamber in order to save Ampere-turns and power. In fact for a given strength the required Ampere-turns per pole are proportional to the cube of its distance from the centre. The low-carbon steel core was 396 mm long , the strength 28 T/m. The strong dipole field generated at the ends by the asymmetry, as well as other unwanted multipoles, were compensated by suitable shaping of the pole profiles.

  9. ISR Radial Field Magnet

    CERN Multimedia

    1983-01-01

    There were 37 (normal) + 3 (special) Radial Field magnets in the ISR to adjust vertically the closed orbit. Gap heights and strengths were 200 mm and .12 Tm in the normal magnets, 220 mm and .18 Tm in the special ones. The core length was 430 mm in both types. Due to their small length as compared to the gap heights the end fringe field errors were very important and had to be compensated by suitably shaping the poles. In order to save on cables, as these magnets were located very far from their power supplies, the coils of the normal type magnets were formed by many turns of solid cpper conductor with some interleaved layers of hollow conductor directly cooled by circulating water

  10. Selected topics in ISR physics

    International Nuclear Information System (INIS)

    Albrow, M.G.; Fabjan, C.W.; Jacob, M.

    1982-01-01

    A special open ISRC meeting was held on 20 September 1982 to present a 'comparative review and future perspectives of ISR physics'. In this report we summarize some of the contributions, with special emphasis on some areas of physics where the ISR are unique and irreplaceable, and which are of fundamental importance. We concentrate on physics with high-psub(T) jets, identified hadrons and single photons, and on heavy-flavour production. We believe that ISR experiments can make decisive experimental tests of quantum chromodynamics or any alternative theories of the strong interaction. (orig.)

  11. The Creation of Constructive Conflict within Educational Administration Departments.

    Science.gov (United States)

    Gmelch, Walter H.

    Issues in the resolution of departmental conflict by university chairs of educational administration departments are discussed in this paper. The need for finding more constructive ways to handle conflict is highlighted by a survey of 808 department chairs at 101 research and doctoral-granting universities, in which chairs identified…

  12. Transitioning ISR architecture into the cloud

    Science.gov (United States)

    Lash, Thomas D.

    2012-06-01

    Emerging cloud computing platforms offer an ideal opportunity for Intelligence, Surveillance, and Reconnaissance (ISR) intelligence analysis. Cloud computing platforms help overcome challenges and limitations of traditional ISR architectures. Modern ISR architectures can benefit from examining commercial cloud applications, especially as they relate to user experience, usage profiling, and transformational business models. This paper outlines legacy ISR architectures and their limitations, presents an overview of cloud technologies and their applications to the ISR intelligence mission, and presents an idealized ISR architecture implemented with cloud computing.

  13. Construction Cost Growth for New Department of Energy Nuclear Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Kubic, Jr., William L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-05-25

    Cost growth and construction delays are problems that plague many large construction projects including the construction of new Department of Energy (DOE) nuclear facilities. A study was conducted to evaluate cost growth of large DOE construction projects. The purpose of the study was to compile relevant data, consider the possible causes of cost growth, and recommend measures that could be used to avoid extreme cost growth in the future. Both large DOE and non-DOE construction projects were considered in this study. With the exception of Chemical and Metallurgical Research Building Replacement Project (CMRR) and the Mixed Oxide Fuel Fabrication Facility (MFFF), cost growth for DOE Nuclear facilities is comparable to the growth experienced in other mega construction projects. The largest increase in estimated cost was found to occur between early cost estimates and establishing the project baseline during detailed design. Once the project baseline was established, cost growth for DOE nuclear facilities was modest compared to non-DOE mega projects.

  14. Surveillance of construction worker injuries through an urban emergency department.

    Science.gov (United States)

    Hunting, K L; Nessel-Stephens, L; Sanford, S M; Shesser, R; Welch, L S

    1994-03-01

    To learn more about the causes of nonfatal construction worker injuries, and to identify injury cases for further work-site investigations or prevention programs, an emergency department-based surveillance program was established. Construction workers with work-related injuries or illnesses were identified by reviewing the medical records of all patients treated at the George Washington University Emergency Department between November 1, 1990 and November 31, 1992. Information regarding the worker, the injury, and the injury circumstances were abstracted from medical records. Information was obtained on 592 injured construction workers from numerous trades. Lacerations were the most commonly treated injuries among these workers, followed by strains and sprains, contusions, and eye injuries. Injuries were most commonly caused by sharp objects (n = 155, 26%), falls (n = 106, 18%), and falling objects (n = 70, 12%). Thirty-five percent of injuries were to the hands, wrists, or fingers. Among the twenty-eight injuries severe enough to require hospital admission, eighteen (64%) were caused by falls. Laborers and Hispanic workers were overrepresented among these severe cases. Emergency Department records were a useful surveillance tool for the initial identification and description of work-related injuries. Although E codes were not that useful for formulating prevention strategies, detailed review of injury circumstances from Emergency Department records was valuable and has helped to establish priorities for prevention activities.

  15. 40th Anniversary of the First Proton-Proton Collisions in the CERN Intersecting Storage Rings (ISR)

    CERN Multimedia

    CERN. Geneva

    2011-01-01

    Welcome, Luigi di Lella and Rolf HeuerDesign and Construction of the ISR, Kurt HubnerPhysics at small angles, Ugo Amaldi (TERA Foundation)The Impact of the ISR on Accelerator Physics and Technology, Philip J. BryantPhysics at high transverse momentum, Pierre Darriulat (VATLY-Hanoi)Concluding remarks, Rolf Heuer

  16. Beam position pickup for antiprotons to the ISR

    CERN Multimedia

    CERN PhotoLab

    1981-01-01

    The Antiproton Project, launched for proton-antiproton collisions in the SPS (SPS collider), had a side-line for p-pbar collisions in the ISR. A new transfer line, TT6, was constructed to transport antiprotons from the 26 GeV PS to the injection line TT1 of ISR ring 2. Antiprotons were a scarce commodity. For setting up the lines, beam diagnostic devices in the antiproton path had to work reliably and precisely with just a few low-intensity pilot pules: single bunches of about 2x10**9 antiprotons every few hours. Electrostatic pickup electrodes were used to measure beam position. They could be mounted for measurement in the horizontal plane, as in this picture, or at 90 deg, for the vertical plane.

  17. Smart systems, dumb data: impact on ISR operations

    Science.gov (United States)

    Creech, Gregory S.

    2013-05-01

    Just as we face a global environment where the latest technology is most needed by Department of Defense (DoD) and the Intelligence Community (IC), we find ourselves hindered by the lack of smart, useful data that our intelligent systems and workforce can fully exploit. Consider the ISR Enterprise "system of systems." Our inability to properly populate metadata fields for making data discoverable and useful is as harmful to system performance as putting lowgrade fuel in a race car. In order for our downstream ISR Enterprise systems (and analysts) to achieve their full performance potential, we must take measures upstream to make the data stream smart. This paper will examine the challenges and ongoing efforts that will benefit analysts at all echelons.

  18. "Roman Pot" at the ISR

    CERN Multimedia

    CERN PhotoLab

    1980-01-01

    "Roman pots" are stainless steel containers, which can be moved from outside the vacuum chamber towards the beam. They house detectors which are conveniently at atmospheric pressure and can still be brought close to the limit of the circulating beam, to detect particles emanating at very small angles from the intersection of two colliding beams. Eifionydd Jones was the inventor of this device, highly successful at the ISR and now used again at the TOTEM experiment at the LHC. This particular Roman Pot, with a thickness of 0.2 mm, was built in 1980 for experiment R210 in intersection I-2, in preparation for proton-antiproton collisions in 1981. See also 7501065.

  19. Beam stability in the ISR

    International Nuclear Information System (INIS)

    Hofmann, A.

    1979-01-01

    There are 3 effects which limit the current in the ISR: the gas desorption by the beam produced ions leads to a pressure rise at a certain beam current. To increase this current limit the vacuum system has been improved continuously which resulted in a maximum beam current of 50 A. The microwave instability leads to a dilution of the longitudinal phase space density during acceleration of the bunches across the chamber and during debunching. This limits the longitudinal density of the final stack and therefore the total current which can be accumulated in the given aperture. The transverse instability of the coasting beam represents another potential limitation of the beam current. This effect is controlled by Landau damping provided by the betatron frequency spread and by feedback systems. The ion induced gas desorption represents the lowest current limit at the top energies. However the other two limitations are not far away and they depend on the proper adjustment of many machine parameters

  20. Golden Jubilee photos: ISR - The first proton-proton interactions

    CERN Document Server

    2004-01-01

    At the inauguration ceremony for the Intersecting Storage Rings (ISR) on 16 October 1971, the man in charge of their construction, Kjell Johnsen, presented the "key" to the machine to Edoardo Amaldi, President of Council. Seated on the stage with them for this symbolic event were Victor Weisskopf, Marcel Antonioz, Willy Jentschke (seen on the left of the photo) and Werner Heisenberg (on the far right). On 27 January that year, in a world premier, signals produced by proton-proton collisions had been observed at the ISR. The protons, supplied by the PS, were injected into two identical rings, each measuring 300 metres in diameter, and collided head on at the 8 points where the rings intersected. The installation, which remained in operation until 1984, gave physicists access to a wide range of energies for hadron physics, hitherto restricted to the data from cosmic ray studies. The many technological challenges that were met at the ISR, in the fields of vacuum technology and stochastic cooling for instance,...

  1. Posturing Tactical ISR Beyond The Umbilical Cord

    Science.gov (United States)

    2017-02-03

    fleet of U-28As and recently acquired MC-12Ws. Each type of platform, either remotely piloted or manned, brings significant enhancements for...Colonel, United States Air Force 3 February 2017 DISTRIBUTION A. Approved for public release: distribution unlimited. ii DISCLAIMER The views ...globe extremely well throughout the years especially when it comes to tactical ISR support with both its remotely piloted fleet of MQ-9s and manned ISR

  2. Genome-wide characterization of ISR induced in Arabidopsis thaliana by Trichoderma hamatum T382 against Botrytis cinerea infection

    Directory of Open Access Journals (Sweden)

    Janick eMathys

    2012-05-01

    Full Text Available In this study, the molecular basis of the induced systemic resistance (ISR in Arabidopsis thaliana by the biocontrol fungus Trichoderma hamatum T382 against the phytopathogen Botrytis cinerea B05-10 was unraveled by microarray analysis both before (ISR-prime and after (ISR-boost additional pathogen inoculation. The observed high numbers of differentially expressed genes allowed us to classify them according to the biological pathways in which they are involved. By focusing on pathways instead of genes, a holistic picture of the mechanisms underlying ISR emerged. In general, a close resemblance is observed between ISR-prime and systemic acquired resistance (SAR, the systemic defense response that is triggered in plants upon pathogen infection leading to increased resistance towards secondary infections. Treatment with Trichoderma hamatum T382 primes the plant (ISR-prime, resulting in an accelerated activation of the defense response against Botrytis cinerea during ISR-boost and a subsequent moderation of the Botrytis cinerea induced defense response (BIDR. Microarray results were confirmed for representative genes by qRT-PCR, by analysis of transgenic plants expressing relevant promoter-GUS constructs and by phenotypic analysis of mutants affected in various defense-related pathways, thereby proving the validity of our approach.

  3. Product Manager C4ISR On-The-Move Experimentation

    National Research Council Canada - National Science Library

    Utroska, William; Langan, Russell; Amabile, Michael

    2006-01-01

    Product Manager C4ISR On-The-Move (PM C4ISR OTM) provides a relevant operational field experimentation venue for the purpose of assessing emerging technologies in a System-of- Systems (SoS) environment...

  4. Blue Guardian: open architecture intelligence, surveillance, and reconnaissance (ISR) demonstrations

    Science.gov (United States)

    Shirey, Russell G.; Borntrager, Luke A.; Soine, Andrew T.; Green, David M.

    2017-04-01

    The Air Force Research Laboratory (AFRL) - Sensors Directorate has developed the Blue Guardian program to demonstrate advanced sensing technology utilizing open architectures in operationally relevant environments. Blue Guardian has adopted the core concepts and principles of the Air Force Rapid Capabilities Office (AFRCO) Open Mission Systems (OMS) initiative to implement an open Intelligence, Surveillance and Reconnaissance (ISR) platform architecture. Using this new OMS standard provides a business case to reduce cost and program schedules for industry and the Department of Defense (DoD). Blue Guardian is an early adopting program of OMS and provides much needed science and technology improvements, development, testing, and implementation of OMS for ISR purposes. This paper presents results and lessons learned under the Blue Guardian Project Shepherd program which conducted Multi-INT operational demonstrations in the Joint Interagency Task Force - South (JIATF-S) and USSOUTHCOM area of operations in early 2016. Further, on-going research is discussed to enhance Blue Guardian Multi-INT ISR capabilities to support additional mission sets and platforms, including unmanned operations over line of sight (LOS) and beyond line of sight (BLOS) datalinks. An implementation of additional OMS message sets and services to support off-platform sensor command and control using OMS/UCI data structures and dissemination of sensor product data/metadata is explored. Lastly, the Blue Guardian team is working with the AgilePod program to use OMS in a full Government Data Rights Pod to rapidly swap these sensors to different aircraft. The union of the AgilePod (which uses SOSA compliant standards) and OMS technologies under Blue Guardian programs is discussed.

  5. The Abbott School Construction Program: NJ Department of Education Proposed Facilities Regulations. Analysis of Preschool Issues

    Science.gov (United States)

    Ponessa, Joan; Boylan, Ellen

    2004-01-01

    This report on preschool facilities analyzes regulations proposed by the New Jersey Department of Education (NJDOE) to implement the Educational Facilities Construction and Financing Act. (EFCFA). EFCFA, which authorizes and governs New Jersey's public school construction program, was enacted in July 2000 to implement the State Supreme Court's…

  6. Women Leaders' Construction of Leadership and Management of the Academic Department

    Science.gov (United States)

    Zulu, C. B.

    2011-01-01

    Research on women in leadership has received growing attention in recent years. But not enough studies have investigated the way women construct leadership and management of the academic department. This article reports on the findings of an inquiry into the experiences of women heads of academic departments (HoDs) at universities in South Africa…

  7. Clean-up at the ISR

    CERN Document Server

    2001-01-01

    After six months of work, the part of the ISR coming under EP Division has been emptied and refurbished. The area is now ready to start building the LHC experiments. People who know the ISR from way back are likely to be surprised when they push open the doors to the old collider. Whereas the part of the tunnel allocated to EP (Experimental Physics) Division now stands empty, a few months ago, it was piled high with odds and ends. For more than 20 years, this part of the former Intersecting Storage Rings, a full quarter of the loop, had been used as storage space. Both items of value and pure junk had been dumped there, ranging from detector prototypes and 30 years old pumps with signs saying 'not to be thrown out', down to planks, a beautiful velvet armchair, and hundreds of electricity racks. Aloïs Girardoz, lost in the huge ISR hall, which will now be used for building the muon chambers of CMS. An audit carried out in 1996 on the research sector storage areas and accelerators signalled an end t...

  8. Inclusive sum rules and spectra of neutrons at the ISR

    International Nuclear Information System (INIS)

    Grigoryan, A.A.

    1975-01-01

    Neutron spectra in pp collisions at ISR energies are studied in the framework of sum rules for inclusive processes. The contributions of protons, π- and E- mesons to the energy sum rule are calculated at √5 = 53 GeV. It is shown by means of this sum rule that the spectra of neutrons at the ISR are in contradiction with the spectra of other particles also measured at the ISR

  9. Bicone vacuum chamber for ISR intersection

    CERN Multimedia

    1975-01-01

    This is one of the bicone chambers made of titanium for experiment R 702. The central corrugated part had a very thin titanium wall (0.28 mm). The first of these chambers collapsed in its central part when baked at 300 C (August 1975). After an intensive effort to develop better quality and reproducible welds for this special material, the ISR workshop was able to build two new chambers of this type. One of them was installed at I 7 for R 702 in 1976 and worked perfectly. It was at that time the most "transparent" intersection vacuum chamber. See also 7609219, 7609221.

  10. Stochastic cooling equipment at the ISR

    CERN Multimedia

    1983-01-01

    The photo shows (centre) an experimental set-up for stochastic cooling of vertical betatron oscillations, used at the ISR in the years before the ICE ring was built. Cooling times of about 30 min were obtained in the low intensity range (~0.3 A). To be noted the four 50 Ohm brass input/output connections with cooling fins, and the baking-out sheet around the cylinder. On the left one sees a clearing electrode box allowing the electrode current to be measured, and the pressure seen by the beam to be evaluated.

  11. The Construction of an Organizational Climate Description Questionnaire for Academic Departments in Colleges and Universities.

    Science.gov (United States)

    Borrevik, Berge Andrew, Jr.

    The purpose of this investigation was to construct an Organizational Climate Description Questionnaire-Higher Education that would permit portrayal of the organizational climate of academic departments within colleges and universities. Data collected from the completion of pilot and research instruments was obtained from the faculty members in 72…

  12. RILEM TC ISR Summer 2015 Activity Report

    Energy Technology Data Exchange (ETDEWEB)

    Le Pape, Yann [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-08-01

    With aging infrastructures, instances of Alkali Silica Reaction (ASR) and Delayed Ettringite Formation (DEF), broadly covered under the term Internal Swelling Reaction (ISR), are increasingly being detected. They have been observed in bridges, dams, and most recently in nuclear power plants. Concrete swelling may result in bridge partial failure, dams with structural cracks and misaligned turbine shafts, and locked slice gates. For nuclear reactors micro-cracks may cause increased gas permeability which will jeopardize the containment integrity and may decrease the residual structural resistance under accidental loading. This TC, which limits its activity to structures with known expansive concrete, seeks to address two complementary but fundamental questions: a) What is the kinetics of the reaction and b) How would it affect the integrity of the structure (serviceability and strength) and thus establish a science based prognostic to the structure owner.

  13. Comments on airborne ISR radar utilization

    Science.gov (United States)

    Doerry, A. W.

    2016-05-01

    A sensor/payload operator for modern multi-sensor multi-mode Intelligence, Surveillance, and Reconnaissance (ISR) platforms is often confronted with a plethora of options in sensors and sensor modes. This often leads an over-worked operator to down-select to favorite sensors and modes; for example a justifiably favorite Full Motion Video (FMV) sensor at the expense of radar modes, even if radar modes can offer unique and advantageous information. At best, sensors might be used in a serial monogamous fashion with some cross-cueing. The challenge is then to increase the utilization of the radar modes in a manner attractive to the sensor/payload operator. We propose that this is best accomplished by combining sensor modes and displays into `super-modes'.

  14. Inelastic diffractive scattering at the CERN ISR

    CERN Document Server

    Albrow, M G; Barber, D P; Benz, P; Bogaerts, A; Bosnjakovic, B; Brooks, J R; Chang, C Y; Clegg, A B; Erné, F C; Gee, C N P; Kooijman, P; Locke, D H; Loebinger, F K; McCubbin, N A; Murphy, P G; Radojicic, D; Rudge, A; Sens, Johannes C; Sessoms, A L; Singh, J; Stork, D; Timmer, J

    1976-01-01

    The properties of the diffractive peak observed in the mass spectra of systems recoiling against observed high-momentum protons emerging from pp collisions at the CERN ISR have been investigated. The cross sections in this peak have been found to have a steep t dependence which flattens out as mod t mod increases. The high mass side of the peak varies approximately as 1/M/sup 2/ (where M is the missing mass of the recoiling system) and scales well in terms of the variable M /sup 2//s. The position of the maximum has been observed to move to lower values of M/sup 2//s as the kinematic boundary of this variable decreases with increasing s. The measured cross sections, integrated up to M/sup 2//s=0.05, rise by (15+or-5)% over the s range 549 to 1464 GeV/sup 2/. (24 refs).

  15. Joint C4ISR Architecture Planning/Analysis System (JCAPS)

    National Research Council Canada - National Science Library

    Wostbrock, Bill

    2002-01-01

    The contractor satisfactorily completed all tasks under both efforts, providing the technology and technical expertise in the development of the Joint C4ISR Architecture Planning/Analysis System (JCAPS) Database Tool...

  16. The layered sensing operations center: a modeling and simulation approach to developing complex ISR networks

    Science.gov (United States)

    Curtis, Christopher; Lenzo, Matthew; McClure, Matthew; Preiss, Bruce

    2010-04-01

    In order to anticipate the constantly changing landscape of global warfare, the United States Air Force must acquire new capabilities in the field of Intelligence, Surveillance, and Reconnaissance (ISR). To meet this challenge, the Air Force Research Laboratory (AFRL) is developing a unifying construct of "Layered Sensing" which will provide military decision-makers at all levels with the timely, actionable, and trusted information necessary for complete battlespace awareness. Layered Sensing is characterized by the appropriate combination of sensors and platforms (including those for persistent sensing), infrastructure, and exploitation capabilities to enable this synergistic awareness. To achieve the Layered Sensing vision, AFRL is pursuing a Modeling & Simulation (M&S) strategy through the Layered Sensing Operations Center (LSOC). An experimental ISR system-of-systems test-bed, the LSOC integrates DoD standard simulation tools with commercial, off-the-shelf video game technology for rapid scenario development and visualization. These tools will help facilitate sensor management performance characterization, system development, and operator behavioral analysis. Flexible and cost-effective, the LSOC will implement a non-proprietary, open-architecture framework with well-defined interfaces. This framework will incentivize the transition of current ISR performance models to service-oriented software design for maximum re-use and consistency. This paper will present the LSOC's development and implementation thus far as well as a summary of lessons learned and future plans for the LSOC.

  17. Enhanced intelligence through optimized TCPED concepts for airborne ISR

    Science.gov (United States)

    Spitzer, M.; Kappes, E.; Böker, D.

    2012-06-01

    Current multinational operations show an increased demand for high quality actionable intelligence for different operational levels and users. In order to achieve sufficient availability, quality and reliability of information, various ISR assets are orchestrated within operational theatres. Especially airborne Intelligence, Surveillance and Reconnaissance (ISR) assets provide - due to their endurance, non-intrusiveness, robustness, wide spectrum of sensors and flexibility to mission changes - significant intelligence coverage of areas of interest. An efficient and balanced utilization of airborne ISR assets calls for advanced concepts for the entire ISR process framework including the Tasking, Collection, Processing, Exploitation and Dissemination (TCPED). Beyond this, the employment of current visualization concepts, shared information bases and information customer profiles, as well as an adequate combination of ISR sensors with different information age and dynamic (online) retasking process elements provides the optimization of interlinked TCPED processes towards higher process robustness, shorter process duration, more flexibility between ISR missions and, finally, adequate "entry points" for information requirements by operational users and commands. In addition, relevant Trade-offs of distributed and dynamic TCPED processes are examined and future trends are depicted.

  18. Department

    African Journals Online (AJOL)

    USER

    2016-09-20

    Sep 20, 2016 ... Department of Biological and Environmental Sciences, Kibabii University. Abstract. This study ... Key Words: Climate Change, Regional Circulation Model, PRECIS, Bungoma County ... by different computer models is much.

  19. Construction of a questionnaire measuring outpatients' opinion of quality of hospital consultation departments

    Directory of Open Access Journals (Sweden)

    Durieux Pierre

    2004-08-01

    Full Text Available Abstract Background Few questionnaires on outpatients' satisfaction with hospital exist. All have been constructed without giving enough room for the patient's point of view in the validation procedure. The main objective was to develop, according to psychometric standards, a self-administered generic outpatient questionnaire exploring opinion on quality of hospital care. Method First, a qualitative phase was conducted to generate items and identify domains using critical analysis incident technique and literature review. A list of easily comprehensible non-redundant items was defined using Delphi technique and a pilot study on outpatients. This phase involved outpatients, patient association representatives and experts. The second step was a quantitative validation phase comprised a multicenter study in 3 hospitals, 10 departments and 1007 outpatients. It was designed to select items, identify dimensions, measure reliability, internal and concurrent validity. Patients were randomized according to the place of questionnaire completion (hospital v. home (participation rate = 65%. Third, a mail-back study on 2 departments and 248 outpatients was conducted to replicate the validation (participation rate = 57%. Results A 27-item questionnaire comprising 4 subscales (appointment making, reception facilities, waiting time and consultation with the doctor. The factorial structure was satisfactory (loading >0.50 on each subscale for all items, except one item. Interscale correlations ranged from 0.42 to 0.59, Cronbach α coefficients ranged from 0.79 to 0.94. All Item-scale correlations were higher than 0.40. Test-retest intraclass coefficients ranged from 0.69 to 0.85. A unidimensional 9-item version was produced by selection of one third of the items within each subscale with the strongest loading on the principal component and the best item-scale correlation corrected for overlap. Factors related to satisfaction level independent from departments

  20. The Abbott School Construction Program: Report on the NJ Department of Education Proposed Regulations on Long-Range Facilities Plans

    Science.gov (United States)

    Ponessa, Joan

    2004-01-01

    This report on Long Range Facilities Plans (LRFPs) analyzes regulations proposed by the New Jersey Department of Education (NJDOE) to implement the Educational Facilities Construction and Financing Act. (EFCFA). EFCFA, which authorizes and governs New Jersey's public school construction program, was enacted in July 2000 to implement the State…

  1. The impact of the ISR on accelerator physics and technology

    International Nuclear Information System (INIS)

    Bryant, P J

    2012-01-01

    The ISR (Intersecting Storage Rings) were two intersecting proton synchrotron rings each with a circumference of 942 m and eight-fold symmetry that were operational for 13 years from 1971 to 1984. The CERN PS injected 26 GeV/c proton beams into the two rings that could accelerate up to 31.4 GeV/c. The ISR worked for physics with beams of 30-40 A over 40-60 hours with luminosities in its superconducting low-β insertion of 1031-1032 cm-2 s-1. The ISR demonstrated the practicality of collider beam physics while catalysing a rapid advance in accelerator technologies and techniques. (author)

  2. Prioritization of proposed waste management construction projects for the Waste Management program within the Department of Energy

    International Nuclear Information System (INIS)

    Johnson, J.V.

    1995-01-01

    A prioritization process is used to evaluate and rank proposed construction projects within the Department of Energy's Waste Management program. The process is used to determine which projects should proceed with conceptual design activities. The proposed construction projects are evaluated against a set of criteria which reflect Waste Management priorities. A management review team ranks and scores the projects thereby generating a prioritized list of projects. Despite decreasing budgets and changing political climates, the process has been a successful decision-aiding tool for selecting construction projects to carry out the Waste Management mission within the Department of Energy

  3. "Flat-Fish" vacuum chamber for the ISR

    CERN Multimedia

    CERN PhotoLab

    1983-01-01

    The "Flat-Fish" vacuum chamber was a very special one for the ISR beam intersection I-4, inside the Split-Field Magnet. Technical descriptions are given with pictures 7802042 and 7712182. There were several generations of this chamber. This picture was taken during the last year of ISR operation. See also 7510230X, 7511123X, 7802039, 7802041. A flat-fish type vacuum chamber was also used at I-8, inside the Open Axial Field Magnet (OAFM, experiment 807 on large transverse momentum collision products), see 7901358.

  4. An old water tank from the time of the ISR is being converted into a temporary store for ATLAS muon chambers.

    CERN Multimedia

    maximilien brice

    2005-01-01

    This large underground water tank dates from the construction of the ISR when CERN had its own independent water supply. No longer needed for water storage, this interesting example of 1960s industrial architecture represents 6000 m3 of useful storage space that can now be accessed via a 4 m x 5 m door made in the wall.

  5. Applicability of Virtual Environments as C4ISR Displays

    Science.gov (United States)

    2006-06-01

    simulator sickness questionnaire (ssq): A method for quantifying simulator sickness. International Journal of Aviation Psychology, 3(3):203ff. Ergonomie ...Displays Thomas Alexander FGAN - Research Institute for Communication, Information Processing, and Ergonomics Wachtberg, Germany Ergonomie und...Führungssysteme FORSCHUNGSINSTITUT FÜR KOMMUNIKATION, INFORMATIONSVERARBEITUNG UND ERGONOMIE 1 FGAN Applicability of Virtual Environments as C4ISR Displays

  6. Test of an undulated vacuum chamber for the ISR

    CERN Multimedia

    1975-01-01

    This picture shows mechanical tests of an undulated vacuum chamber for downstream arms of ISR intersections. This chamber, made of 0.3 mm thick inconel, had inner dimensions of 150 mm by 50 mm. The deflection under vacuum is measured by dial gauges. On the left one sees the large vessel where vacuum chambers were tested at pressures above atmospheric pressure.

  7. CE-SAM: a conversational interface for ISR mission support

    Science.gov (United States)

    Pizzocaro, Diego; Parizas, Christos; Preece, Alun; Braines, Dave; Mott, David; Bakdash, Jonathan Z.

    2013-05-01

    There is considerable interest in natural language conversational interfaces. These allow for complex user interactions with systems, such as fulfilling information requirements in dynamic environments, without requiring extensive training or a technical background (e.g. in formal query languages or schemas). To leverage the advantages of conversational interactions we propose CE-SAM (Controlled English Sensor Assignment to Missions), a system that guides users through refining and satisfying their information needs in the context of Intelligence, Surveillance, and Reconnaissance (ISR) operations. The rapidly-increasing availability of sensing assets and other information sources poses substantial challenges to effective ISR resource management. In a coalition context, the problem is even more complex, because assets may be "owned" by different partners. We show how CE-SAM allows a user to refine and relate their ISR information needs to pre-existing concepts in an ISR knowledge base, via conversational interaction implemented on a tablet device. The knowledge base is represented using Controlled English (CE) - a form of controlled natural language that is both human-readable and machine processable (i.e. can be used to implement automated reasoning). Users interact with the CE-SAM conversational interface using natural language, which the system converts to CE for feeding-back to the user for confirmation (e.g. to reduce misunderstanding). We show that this process not only allows users to access the assets that can support their mission needs, but also assists them in extending the CE knowledge base with new concepts.

  8. Bi-cone vacuum chamber in the ISR

    CERN Multimedia

    CERN PhotoLab

    1976-01-01

    The "bi-cone" vacuum chamber in ISR intersection I-7, for experiment R702. Made from 0.28 mm thick titanium, it was at its time the most transparent chamber ever built. Ian Wilson is standing next to the chamber. See also 7609219.

  9. Single-photon production at the CERN ISR

    International Nuclear Information System (INIS)

    Linnemann, J.T.

    1981-01-01

    A measurement of single photon production from p-p collisions at ISR energies is presented. A signal comparable to single π 0 production is found at large p/sub T/. A study of associated particles favors production dominated by the first-order QCD process of gluon-valence quark production q g → q γ

  10. ISR corrections to associated HZ production at future Higgs factories

    Directory of Open Access Journals (Sweden)

    Mario Greco

    2018-02-01

    Full Text Available We evaluate the QED corrections due to initial state radiation (ISR to associated Higgs boson production in electron–positron (e+e− annihilation at typical energies of interest for the measurement of the Higgs properties at future e+e− colliders, such as CEPC and FCC–ee. We apply the QED Structure Function approach to the four-fermion production process e+e−→μ+μ−bb¯, including both signal and background contributions. We emphasize the relevance of the ISR corrections particularly near threshold and show that finite third order collinear contributions are mandatory to meet the expected experimental accuracy. We analyze in turn the rôle played by a full four-fermion calculation and beam energy spread in precision calculations for Higgs physics at future e+e− colliders.

  11. Investigation of high duty factor ISR RFQ-1000

    International Nuclear Information System (INIS)

    Lu, Y.R.; Chen, C.E.; Fang, J.X.; Gao, S.L.; Guo, J. F.; Guo, Z.Y.; Li, D.S.; Li, W.G.; Pan, O.J.; Ren, X.T.; Wu, Y.; Yan, X.Q.; Yu, J.X.; Yu, M.L.; Ratzinger, U.; Deitinghoff, H.; Klein, H.; Schempp, A.

    2003-01-01

    Two Integral Split Ring (ISR) RFQs with high duty factor of 16.7% have been designed for the application of heavy ion implantation and built in the past several years at Institute of Heavy Ion Physics (IHIP) in Peking University. Two kinds of PIG ion sources with permanent magnets and LEBT were installed and optimized for the injection into these two RFQs. The positive O + and negative O - ions were extracted and accelerated separately as well as simultaneously. The output macro pulse O - beam current reached 660 μA at a transmission efficiency of more than 82%. The N + beam was also accelerated with similar transmission efficiency, but the output current intensity for positive ions were lower than the negative ions because of the extracted current limitation of ion sources. The improvements, especially for high duty factor and experimental results with the 1 MeV ISR RFQ will be presented in this paper

  12. Investigation of high duty factor ISR RFQ-1000

    Science.gov (United States)

    Lu, Y. R.; Chen, C. E.; Fang, J. X.; Gao, S. L.; Guo, J. F.; Guo, Z. Y.; Li, D. S.; Li, W. G.; Pan, O. J.; Ren, X. T.; Wu, Y.; Yan, X. Q.; Yu, J. X.; Yu, M. L.; Ratzinger, U.; Deitinghoff, H.; Klein, H.; Schempp, A.

    2003-12-01

    Two Integral Split Ring (ISR) RFQs with high duty factor of 16.7% have been designed for the application of heavy ion implantation and built in the past several years at Institute of Heavy Ion Physics (IHIP) in Peking University. Two kinds of PIG ion sources with permanent magnets and LEBT were installed and optimized for the injection into these two RFQs. The positive O+ and negative O- ions were extracted and accelerated separately as well as simultaneously. The output macro pulse O- beam current reached 660 μA at a transmission efficiency of more than 82%. The N+ beam was also accelerated with similar transmission efficiency, but the output current intensity for positive ions were lower than the negative ions because of the extracted current limitation of ion sources. The improvements, especially for high duty factor and experimental results with the 1 MeV ISR RFQ will be presented in this paper.

  13. ISR corrections to associated HZ production at future Higgs factories

    Science.gov (United States)

    Greco, Mario; Montagna, Guido; Nicrosini, Oreste; Piccinini, Fulvio; Volpi, Gabriele

    2018-02-01

    We evaluate the QED corrections due to initial state radiation (ISR) to associated Higgs boson production in electron-positron (e+e-) annihilation at typical energies of interest for the measurement of the Higgs properties at future e+e- colliders, such as CEPC and FCC-ee. We apply the QED Structure Function approach to the four-fermion production process e+e- →μ+μ- b b bar , including both signal and background contributions. We emphasize the relevance of the ISR corrections particularly near threshold and show that finite third order collinear contributions are mandatory to meet the expected experimental accuracy. We analyze in turn the rôle played by a full four-fermion calculation and beam energy spread in precision calculations for Higgs physics at future e+e- colliders.

  14. Investigation of high duty factor ISR RFQ-1000

    CERN Document Server

    Lu, Y R; Fang, J X; Gao, S L; Guo, J F; Guo, Z Y; Li, D S; Li, W G; Pan, O J; Ren, X T; Wu, Y; Yan, X Q; Yu Jin Xiang; Yu, M L; Ratzinger, U; Deitinghoff, H; Klein, H; Schempp, A

    2003-01-01

    Two Integral Split Ring (ISR) RFQs with high duty factor of 16.7% have been designed for the application of heavy ion implantation and built in the past several years at Institute of Heavy Ion Physics (IHIP) in Peking University. Two kinds of PIG ion sources with permanent magnets and LEBT were installed and optimized for the injection into these two RFQs. The positive O**+ and negative O**- ions were extracted and accelerated separately as well as simultaneously. The output macro pulse O**- beam current reached 660muA at a transmission efficiency of more than 82%. The N**+ beam was also accelerated with similar transmission efficiency, but the output current intensity for positive ions were lower than the negative ions because of the extracted current limitation of ion sources. The improvements, especially for high duty factor and experimental results with the 1MeV ISR RFQ will be presented in this paper.

  15. Spanish Government delegation in the ISR workshop clean room

    CERN Multimedia

    CERN PhotoLab

    1982-01-01

    A Spanish Government delegation visited CERN before Spain rejoined CERN as a Member State(in 1983). Some delegates were particularly interested in advanced technologies. The picture shows them in the ISR workshop clean room looking at components of vacuum chambers for experiments. From left to right: a delegate, Director-General Herwig Schopper demonstrating the lightness of a titanium chamber, another delegate, the Spanish Minister of Industry and Energy Mr.Ignacio Bayon Marine and Romeo Perin. See also 8202369.

  16. Overview of the Axial Field Spectrometer in the ISR tunnel

    CERN Multimedia

    1980-01-01

    A view of the Axial Field Spectrometer – the last large experiment at the ISR. The horizontal top and vertical outer arrays of the uranium-scintillator hadron calorimeter are clear to be seen, with the blue cylindrical pole piece of the magnet just visible. The pipes that are visible in front of the pole piece are cryogenic feed pipes for the superconducting low-beta quadrupoles.

  17. Imploded test-chamber for an ISR intersection

    CERN Multimedia

    CERN PhotoLab

    1977-01-01

    At the ISR intersection points the vacuum chambers had to be as "transparent" as possible, for the p-p collision product particles to reach the detectors with minimum hindrance. This meant the choice of a light, yet very strong, metal; minimum thickness; and corrugation for mechanical strength. The test-chamber seen here was made of 0.6 mm thick corrugated titanium, obviously not strong enough to withstand the atmospheric pressure.

  18. Lepton pair production at ISR energies and QCD

    International Nuclear Information System (INIS)

    Altarelli, G.; Martinelli, G.

    1985-01-01

    Motivated by some recent results from the ISR we have considered all available data on the production of Drell-Yan pairs by high energy proton beams. We show that the lepton pair cross sections and qsub(T) distributions are correctly described by QCD using the known distributions of partons in the proton and acceptable values of the QCD scale Λ. No other free parameter is required. Within the accuracy of the data no appreciable intrinsic transverse momentum is needed. (orig.)

  19. A Persistent Perch: USSOCOMs Use of Organic Space Based ISR

    Science.gov (United States)

    2015-05-01

    traits. The mass constraint of a single CubeSat can be solved by fractionating, or spreading , the CubeSat’s functions among a closely flying...personnel and personnel and equipment fit into its current force structure. Traditionally, space ISR assets are, like air assets, spread throughout the... Pumpkin Incorporated, " Pumpkin Satellite Parts Price List" 24 USSOCOM Intelligence Officer 25 Office of the Under Secretary of Defense (Comptroller

  20. The OAFM magnet for ISR intersection I-8

    CERN Multimedia

    CERN PhotoLab

    1979-01-01

    The Open Axial Field Magnet (OAFM), weighing in at 300 tons, was installed in ISR intersection I-8 and brought into operation early in 1979. Fitted with a highly transparent "flat-fish" vacuum chamber, it served experiment R807 (large transverse momentum). Flat-fish vacuum chambers were originally developed for use inside the Split-Field Magnet (SFM) at intersection I-4: see 8310325 and references there.

  1. Access control within military C4ISR systems

    Science.gov (United States)

    Maschino, Mike

    2003-07-01

    Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance (C4ISR) tactical battlefield systems must provide the right information and resources to the right individuals at the right time. At the same time, the C4ISR system must enforce access controls to prevent the wrong individuals from obtaining sensitive information, or consuming scarce resources. Because lives, missions and property depend upon them, these access control mechanisms must be effective, reliable, efficient and flexible. The mechanisms employed must suit the nature of the items that are to be protected, as well as the varieties of access policies that must be enforced, and the types of access that will be made to these items. Some access control technologies are inherently centralized, while others are suitable for distributed implementation. The C4ISR architect must select from among the available technologies a combination of mechanisms that eases the burden of policy administration, but is inherently survivable, accurate, resource efficient, and which provides low latency. This paper explores various alternative access enforcement mechanisms, and assesses their effectiveness in managing policy-driven access control within the battlespace.

  2. Ears and Eyes in the Sky: The Evolution of Manned Airborne ISR

    Science.gov (United States)

    2012-05-25

    immeasurably grateful. I would be remiss not to mention Mr. Larry Tart. His work on manned airborne ISR has educated and inspired the latest...comprehensive summary of airborne ISR such as that presented in this thesis. Several prominent works contain significant sections on airborne ISR. Larry ...Historic Cryptographic Collection, RG 457, Box 1369, NARA. 77 William E. Burrows , By Any Means Necessary (New York, NY: Farrar, Straus, and Giroux

  3. Professional Development in Person: Identity and the Construction of Teaching within a High School Science Department

    Science.gov (United States)

    Deneroff, Victoria

    2016-01-01

    This is a narrative inquiry into the role of professional development in the construction of teaching practice by an exemplary urban high school science teacher. I collected data during 3 years of ethnographic participant observation in Marie Gonzalez's classroom. Marie told stories about her experiences in ten years of professional development…

  4. A Randomized Controlled Trial of Intensive Sleep Retraining (ISR): A Brief Conditioning Treatment for Chronic Insomnia

    Science.gov (United States)

    Harris, Jodie; Lack, Leon; Kemp, Kristyn; Wright, Helen; Bootzin, Richard

    2012-01-01

    Study Objective: To investigate the effectiveness of intensive sleep retraining in comparison and combination with traditional behavioral intervention for chronic primary insomnia. Participants: Seventy-nine volunteers with chronic sleep-onset insomnia (with or without sleep maintenance difficulties) were randomly assigned either to intensive sleep retraining (ISR), stimulus control therapy (SCT), ISR plus SCT, or the control (sleep hygiene) treatment condition. Intervention: ISR treatment consisted of 50 sleep onset trials over a 25-h sleep deprivation period. Measurements and Results: Treatment response was assessed with sleep diary, activity monitoring, and questionnaire measures. The active treatment groups (ISR, SCT, ISR+SCT) all resulted in significant improvements in sleep onset latency and sleep efficiency, with moderate to large effect sizes from pre- to post-treatment. Wake time after sleep onset decreased significantly in the SCT and ISR+SCT groups. Total sleep time increased significantly in the ISR and ISR+SCT treatment groups. Participants receiving ISR (ISR, ISR+SCT) experienced rapidly improved SOL and TST during treatment, suggesting an advantage of rapid improvements in sleep in response to ISR. Although there were few statistically significant differences between groups on individual variables, ISR+SCT resulted in consistently larger effect sizes of change than other treatments, including questionnaire measures of sleep quality, sleep self-efficacy, and daytime functioning. The combination treatment group (ISR+SCT) showed trends to outperform other active treatment groups with fewer treatment dropouts, and a greater proportion of treatment responders with 61% reaching “good sleeper” status. Treatment gains achieved at post-treatment in the active treatment groups were largely maintained throughout follow-up periods to 6 months. Conclusion: This 25-hour intensive conditioning treatment for chronic insomnia can produce rapid improvements in

  5. Professional development in person: identity and the construction of teaching within a high school science department

    Science.gov (United States)

    Deneroff, Victoria

    2016-06-01

    This is a narrative inquiry into the role of professional development in the construction of teaching practice by an exemplary urban high school science teacher. I collected data during 3 years of ethnographic participant observation in Marie Gonzalez's classroom. Marie told stories about her experiences in ten years of professional development focused on inquiry science teaching. I use a social practice theory lens to analyze my own stories as well as Marie's. I make the case that science teaching is best understood as mediated by socially-constructed identities rather than as the end-product of knowledge and beliefs. The cognitive paradigm for understanding teachers' professional learning fails to consistently produce transformations of teaching practice. In order to design professional development with science teachers that is generative of new knowledge, and is self-sustaining, we must understand how to build knowledge of how to problematize identities and consciously use social practice theory.

  6. Toru to Nukui dam construction carried out by Chugoku district construction department of Ministry of construction. Kensetsusho chugoku chiho kensetsukyoku Nukui dam koji kengakuki

    Energy Technology Data Exchange (ETDEWEB)

    Kitajima, E. (Chugoku Kayaku Co. Ltd. Hiroshima (Japan))

    1993-08-31

    This paper reports the summary of a tour to the Nukui dam being constructed on the Ota river system in Hiroshima Prefecture, as a study activity of the blasting expert working group. The Nukui dam has the second highest embankment in Japan (155 m). It adjusts flood at 1800 m[sup 3]/s from the planned high water discharge of 2900 m[sup 3]/s supplies water of 200,000 m[sup 3] daily at maximum, and generates electric power of 2300 kW as the maximum output. The blasting adopted a presplit system not to damage base rock beds, and was used with a bench height of 5 m, a hole diameter of 75 mm, a minimum shaft line of 2.5 m, and a hole distance of 2.8m. The main explosive used was the ANFO, No. 3 Kiri, Akatsuki dynamite. Slurry explosives were used for the presplit. Drilling machines with three-dimensional computers were used. The 'Nukui Dam Work Station' is the country's first site office/lodgings integrated facility offering as comfortable working environment as a city hotel. The facility is expected to wipe out the dirty, dangerous and hard image of construction work. 1 ref., 3 figs.

  7. Split Field magnet at the I4 ISR intersection

    CERN Multimedia

    1974-01-01

    The Split-Field Magnet (SFM) at I4 had an unconventional topology, consisting of two dipole magnets of opposite polarity. It formed the heart of the first general facility at the ISR. It had a useful magnetic field volume of 28 m3 and a field in the median plane of 1.14 T. With a gap height of 1.1 m and length of 10.5 m, the magnet weighed about 1000 t. The SFM spectrometer featured the first large-scale application of MWPCs (about 70,000 wires), which filled the main magnet, visible here in 1974, and the two large compensator magnets.

  8. Siting and constructing very deep monitoring wells on the US Department of Energy's Nevada Test Site

    International Nuclear Information System (INIS)

    Cullen, J.J.; Jacobson, R.L.; Russell, C.E.

    1991-01-01

    Many aspects of the Nevada Test Site's (NTS) hydrogeologic setting restrict the use of traditional methods for the siting and construction of ground-water characterization and monitoring wells. The size of the NTS precludes establishing high-density networks of characterization wells, as are typically used at smaller sites. The geologic complexity and variability of the NTS requires that the wells be criticality situated. The hydrogeologic complexity requires that each well provide access to many aquifers. Depths to ground water on the NTS require the construction of wells averaging approximately 1000 meters in depth. Wells meeting these criteria are uncommon in the ground-water industry, therefore techniques used by petroleum engineers are being employed to solve certain siting-, design- and installation-related problems. To date, one focus has been on developing completion strings that facilitate routine and efficient ground-water sampling from multiple intervals in a single well. The method currently advocated employs a new design of sliding side door sleeve that is actuated by an electrically operated hydraulic shifting tool. Stemming of the wells is being accomplished with standard materials (cement based grouts and sands); however, new stemming methods are being developed, to accommodate the greater depths, to minimize pH-related problems caused by the use of cements, to enhance the integrity of the inter-zone seals, and to improve the representativeness of radionuclide analyses performed on ground-water samples. Bench-scale experiments have been used to investigate the properties of more than a dozen epoxy-aggregate grout mixtures -- materials that are commonly used in underwater sealing applications

  9. From information needs to information gathering: a system optimization perspective to ISR synchronization

    Science.gov (United States)

    Ortiz-Peña, Héctor J.; Nagi, Rakesh; Sudit, Moises; Moskal, Michael D.; Dawson, Michael; Fink, James; Hanratty, Timothy; Heilman, Eric; Tuttle, Daniel

    2012-06-01

    There has been significant progress recognizing the value of Intelligence, Surveillance, and Reconnaissance (ISR) activities supporting Situational Awareness and Command and Control functions during the past several decades. We consider ISR operations to be proactive (discovering activities or areas of interest), active (activities performed for a particular task that flows down from a hierarchical process) or reactive (critical information gathering due to unexpected events). ISR synchronization includes the analysis and prioritization of information requirements, identification of intelligence gaps and the recommendation of available resources to gather information of interest, for all types of ISR operations. It has become critically important to perform synchronized ISR activities to maximize the efficient utilization of limited resources (both in quantity and capabilities) and, simultaneously, to increase the accuracy and timeliness of the information gain. A study evaluating the existing technologies and processes supporting ISR activities is performed suggesting a rigorous system optimization approach to the ISR synchronization process. Unfortunately, this approach is not used today. The study identifies existing gaps between the current ISR synchronization process and the proposed system optimization approach in the areas of communication and collaboration tools and advanced decision aids (analytics). Solutions are recommended that will help close this gap.

  10. Efficiency evaluation of a safety department in a construction company-A case study: A DEA approach

    Directory of Open Access Journals (Sweden)

    Solomon Odeyale

    2015-01-01

    Full Text Available Data Envelopment Analysis (DEA is a decision making tool based on linear programming for measuring the relative efficiency of a set of comparable units. DEA helps us identify the sources and level of inefficiency for each of the inputs and outputs. This approach has been used to evaluate the efficiency of the safety department in five construction companies. A three-input, safety workforce, safety training, and safety budget, and two-output, Perfect days and Uptime, constant returns-to-scale (CRS model was developed. The model indicated the necessary improvements required in the inefficient unit’s inputs and outputs to make it efficient, by identifying what factor is responsible for the low efficiency of performance, and also what factor should be improved in order to improve the efficiency of the safety department. The result shows that the safety department of firm A, B and D are efficient, but Firm C and Firm E can improve their efficiency by reducing inputs up to 3.34% and 6.05%, respectively. The inputs identified for reduction were; number of safety staffs and safety budget for Firm C and E respectively.

  11. Calorimeter trigger system for the ISR axial-field spectrometer

    International Nuclear Information System (INIS)

    1981-01-01

    A fast and flexible trigger processor system designed to run in parallel up to 51 different types of trigger is used in a large hadron calorimeter experiment at CERN-ISR. A very fast data bus connected to 255 10 bit address ECL memory chips allows programmable selection of events according to their topology and energy pattern in less than 150 ns. In addition this system can interrogate two programmable processors (ESOP) to isolate events characterized by a large energy flow in the central drift chamber (< 500 μs). All functions of the trigger processor can be checked externally by a computer through injecting in parallel simulated input signals into various stages of the system. Salient features and performances will be discussed

  12. Production of charmed mesons and charmed baryons at the ISR

    International Nuclear Information System (INIS)

    Geist, W.M.

    1980-01-01

    Although many experiments were dedicated to charm search in hadronic interactions no significant signals were found until recently. This is why no consistent picture for charmed particle production could be extracted from the data so far. After the first observation of D + production by the CCHK-Collaboration, the obvious aim is to learn more details about the dominant production mechanisms of this new flavour. The observation of charmed baryon production at the ISR by the CCHK and two other collarborations constitutes another major step forward in this field. Here, the two experiments performed by CCHK with the Split Field Magnet (SFM) will be described, in which charmed meson production and charmed (anti)-baryon production were observed. Cross sections will be presented and consequences of the results will be discussed

  13. On-line filtering at the CERN-ISR

    International Nuclear Information System (INIS)

    Frehse, H.

    1981-01-01

    During the last years it has become quite evident that one should aim at trigger systems with high selectivity in order to improve the purity of data and simultaneously remove load from the off-line processing. At the CERN ISR typical pp interaction rates are in the order of 1-3 MHz. Therefore experiments studying low cross section processes need trigger systems which provide reduction factors in the order of 10 5 to avoid dead time losses. The use of programmable devices, allowing for flexible and sophisticated decision schemes, enables experiments to gain a decisive factor in rejection after pre-triggering with more conventional devices. An overview of the different methods employed and their performance is given. (orig.)

  14. [Innovation drive is the original motive force of discipline construction: the developing road of Department of Burns and Plastic Surgery in the 309th Hospital of PLA].

    Science.gov (United States)

    Jia, C Y

    2018-03-20

    Discipline construction is a systematic project, covering clinic, teaching, scientific research, management, and humanity. Based on the perspective of innovation drive, from the aspects of discipline structure setting, specialized laboratory construction, sub-specialty formation, clinical characteristic and advantage formation, and management concept update, this article summarizes the growth process of Department of Burns and Plastic Surgery in the 309th Hospital of PLA.

  15. Deployment of 802.15.4 Sensor Networks for C4ISR Operations

    National Research Council Canada - National Science Library

    Ngo, Damian N

    2006-01-01

    .... The objective of this thesis is to focus on the deployment issues of WSNs. In addition, this thesis assesses the optimal configurations and environment that enables the sensor networks to thrive in a C4ISR environment...

  16. Experimental study and numerical modelling of geochemical reactions occurring during uranium in situ recovery (ISR) mining

    International Nuclear Information System (INIS)

    Ben Simon, R.

    2011-09-01

    The in situ Recovery (ISR) method consists of ore mining by in situ chemical leaching with acid or alkaline solutions. ISR takes place underground and is therefore limited to the analysis of the pumped solutions, hence ISR mine management is still empirical. Numerical modelling has been considered to achieve more efficient management of this process. Three different phenomena have to be taken into account for numerical simulations of uranium ISR mining: (1) geochemical reactions; (2) the kinetics of these reactions, and (3) hydrodynamic transport with respect to the reaction kinetics. Leaching tests have been conducted on ore samples from an uranium mine in Tortkuduk (Kazakhstan) where ISR is conducted by acid leaching. Two types of leaching experiments were performed: (1) tests in batch reactors; and (2) extraction in flow through columns. The assumptions deduced from the leaching tests were tested and validated by modelling the laboratory experiments with the numerical codes CHESS and HYTEC, both developed at the Geosciences research center of Mines ParisTech. A well-constrained 1D hydrogeochemical transport model of the ISR process at laboratory-scale was proposed. It enables to translate the chemical release sequence that is observed during experiments into a geochemical reaction sequence. It was possible to highlight the controlling factors of uranium dissolution, and the precipitation of secondary mineral phase in the deposit, as well as the determination of the relative importance of these factors. (author)

  17. The science of autonomy: integrating autonomous systems with the ISR enterprise

    Science.gov (United States)

    Creech, Gregory S.

    2013-05-01

    Consider a future where joint, unmanned operations are the norm. A fleet of autonomous airborne systems conducts overwatch and surveillance for their land and sea brethren, accurately reporting adversary position and aptly guiding the group of autonomous land and sea warriors into position to conduct a successful takedown. Sounds a bit like science fiction, but reality is just around the corner. The DoD ISR Enterprise has evolved significantly over the past decade and has learned many a harsh lesson along the way. Autonomous system operations supporting the warfighter have also evolved, arguably to a point where integration into the ISR Enterprise is a must, in order to reap the benefits that these highly capable systems possess. Achieving meaningful integration, however, is not without its challenges. The ISR Enterprise, for example, is still plagued with "stovepipe" efforts - sufficiently filling a niche for an immediate customer need, but doing little to service the needs of the greater enterprise. This paper will examine the science of autonomy, the challenges and potential benefits that it brings to the ISR Enterprise and recommendations that will facilitate smooth integration of emerging autonomous systems with the mature suite of traditional manned and unmanned ISR platforms.

  18. Identification of a Potential ISR Determinant from Pseudomonas aeruginosa PM12 against Fusarium Wilt in Tomato

    Directory of Open Access Journals (Sweden)

    Sabin Fatima

    2017-05-01

    Full Text Available Biocontrol of plant diseases through induction of systemic resistance is an environmental friendly substitute to chemicals in crop protection measures. Different biotic and abiotic elicitors can trigger the plant for induced resistance. Present study was designed to explore the potential of Pseudomonas aeruginosa PM12 in inducing systemic resistance in tomato against Fusarium wilt. Initially the bioactive compound, responsible for ISR, was separated and identified from extracellular filtrate of P. aeruginosa PM12. After that purification and characterization of the bacterial crude extracts was carried out through a series of organic solvents. The fractions exhibiting ISR activity were further divided into sub-fractions through column chromatography. Sub fraction showing maximum ISR activity was subjected to Gas chromatography/mass spectrometry for the identification of compounds. Analytical result showed three compounds in the ISR active sub-fraction viz: 3-hydroxy-5-methoxy benzene methanol (HMB, eugenol and tyrosine. Subsequent bioassays proved that HMB is the potential ISR determinant that significantly ameliorated Fusarium wilt of tomato when applied as soil drench method at the rate of 10 mM. In the next step of this study, GC-MS analysis was performed to detect changes induced in primary and secondary metabolites of tomato plants by the ISR determinant. Plants were treated with HMB and Fusarium oxysporum in different combinations showing intensive re- modulations in defense related pathways. This work concludes that HMB is the potential elicitor involved in dynamic reprogramming of plant pathways which functionally contributes in defense responses. Furthermore the use of biocontrol agents as natural enemies of soil borne pathogens besides enhancing production potential of crop can provide a complementary tactic for sustainable integrated pest management.

  19. At the ISR intersection I-4 and Split-Field Magnet Facility.

    CERN Multimedia

    1983-01-01

    Five experiments were still taking data in the last year of the ISR life (as a collider): R418 - study of light-ion collisions; R419 - study of events with forward identified particles; R420 - ln(s) physics in ppbar collisions; R421 - comparison of pp and ppbar collisions; R422 - heavy flavour production.

  20. Study of resolved high-psub(T) neutral pions at the CERN ISR

    International Nuclear Information System (INIS)

    Kourkoumelis, C.; Resvanis, L.K.; Voulgaris, G.; Filippas, T.A.; Fokitis, E.; Fabjan, C.W.; Fields, T.; Lissauer, D.; Mannelli, I.; Mouzourakis, P.; Nakamura, K.; Nappi, A.; Willis, W.J.; Goldberg, M.; Lankford, A.J.

    1979-01-01

    The inclusive production of π 0 at large values of psub(T) in pp collisions at the ISR has been studied. In this experiment the two photons are resolved and separately measured for psub(T) values of up to 6 GeV/c, giving confidence that the desired signal has been separated from various backgrounds. (Auth.)

  1. Inclusive eta production at high psub(T) at the ISR

    International Nuclear Information System (INIS)

    Kourkoumelis, C.; Resvanis, L.K.; Filippas, T.A.; Fokitis, E.; Fabjan, C.W.; Fields, T.; Lissauer, D.; Mannelli, I.; Mouzourakis, P.; Nappi, A.; Willis, W.J.; Goldberg, M.

    1979-01-01

    The inclusive eta production cross section at the CERN ISR has been measured for psub(T) values of up to 11 GeV/c. It is found that the eta/π 0 cross-section ratio has an average value of 0.55 +- 0.07 and varies little with psub(T). (Auth.)

  2. Increasing Intelligence, Surveillance, and Reconnaissance (ISR) Operational Agility through Mission Command

    Science.gov (United States)

    2016-06-10

    patterns can emerge within an acceptable deviance . As evolving problems and patters of emergence are communicated across the system, innovative and...the challenges of the complex, unpredictable, and challenging global security environment within the established boundaries of behavior . 93 ISR

  3. Technology Prioritized for HA/DR: A Space Based ISR Solution

    Science.gov (United States)

    2014-04-01

    record, with history demonstrating example after example where we picked wrong.11 Both large and small wars provide a different scenario for ISR...Revolution in Understanding the Wave Climate, 15 years of progress in radar altimetry Symposium, Venice , Italy, 2006. Charter on Space and Major Disasters

  4. Inclusive zero-angle neutron spectra at the ISR and OPER-model

    International Nuclear Information System (INIS)

    Grigoryan, A.A.

    1977-01-01

    The invlusive zero-angle neutron spectra in pp-collisions measured at the ISR are compared with the OPER-model predictions. OPER-model rather well describes the experimental data. Some features of the spectra behaviour at fixed transverse momentum and large x are considered

  5. WANDERER IN THE MIST: THE SEARCH FOR INTELLIGENCE, SURVEILLANCE, AND RECONNAISSANCE (ISR) STRATEGY

    Science.gov (United States)

    2017-06-01

    the production of over 383,000 photographic prints to support various intelligence , mapping, and 15...WANDERER IN THE MIST: THE SEARCH FOR INTELLIGENCE , SURVEILLANCE, AND RECONNAISSANCE (ISR) STRATEGY BY MAJOR RYAN D. SKAGGS, USAF...program from the University of California at Los Angeles (UCLA) in 2004. He is a career intelligence officer with over 13 years of experience across a

  6. An agile acquisition decision-support workbench for evaluating ISR effectiveness

    Science.gov (United States)

    Stouch, Daniel W.; Champagne, Valerie; Mow, Christopher; Rosenberg, Brad; Serrin, Joshua

    2011-06-01

    The U.S. Air Force is consistently evolving to support current and future operations through the planning and execution of intelligence, surveillance and reconnaissance (ISR) missions. However, it is a challenge to maintain a precise awareness of current and emerging ISR capabilities to properly prepare for future conflicts. We present a decisionsupport tool for acquisition managers to empirically compare ISR capabilities and approaches to employing them, thereby enabling the DoD to acquire ISR platforms and sensors that provide the greatest return on investment. We have developed an analysis environment to perform modeling and simulation-based experiments to objectively compare alternatives. First, the analyst specifies an operational scenario for an area of operations by providing terrain and threat information; a set of nominated collections; sensor and platform capabilities; and processing, exploitation, and dissemination (PED) capacities. Next, the analyst selects and configures ISR collection strategies to generate collection plans. The analyst then defines customizable measures of effectiveness or performance to compute during the experiment. Finally, the analyst empirically compares the efficacy of each solution and generates concise reports to document their conclusions, providing traceable evidence for acquisition decisions. Our capability demonstrates the utility of using a workbench environment for analysts to design and run experiments. Crafting impartial metrics enables the acquisition manager to focus on evaluating solutions based on specific military needs. Finally, the metric and collection plan visualizations provide an intuitive understanding of the suitability of particular solutions. This facilitates a more agile acquisition strategy that handles rapidly changing technology in response to current military needs.

  7. Commentary about the large transverse momenta secondaries observed at the ISR-CERN (on basis of cosmic ray data)

    CERN Document Server

    Rodrigues, W A; Turtelli, A

    1974-01-01

    The authors discuss the large transverse momentum secondaries observed at CERN-ISR on the basis of high energy cosmic ray data which indicate the existence of a discrete mass spectrum for intermediate fireball states. (13 refs).

  8. The eight superconducting quadrupoles for the ISR high-luminosity insertion

    International Nuclear Information System (INIS)

    Billan, J.; Henrichsen, K.N.; Laeger, H.; Lebrun, Ph.; Perin, R.; Pichler, S.; Pugin, P.; Resegotti, L.; Rohmig, P.; Tortschanoff, T.; Verdier, A.; Walckiers, L.; Wolf, R.

    1980-01-01

    Eight superconducting quadrupoles for a high-luminosity insertion in the ISR have been produced by industrial firms according to CERN design and manufacturing specifications, and assembled and tested at CERN. The horizontal cylindrical cryostats, which contain windings and steel yoke in a boiling helium bath, have a 173 mm warm bore. For 31 GeV beam energy, the maximum operating gradient on the quadrupole axis is 43 T m -1 and the maximum field in the windings is 5.5 T. Sextupole windings provide a linear variation of the gradient of up to 4 % over the bore width and dodecapole windings trim the field pattern as a function of excitation. This paper reports about production history, acceptance tests, and performance. The results of magnetic measurements are also summarized. The insertion will be installed into the ISR as from August 1980. (Auth.)

  9. Correlations in simple multi-string models of pp collisions at ISR energies

    International Nuclear Information System (INIS)

    Lugovoj, V.V.; Chudakov, V.M.

    1989-01-01

    Simple statistical simulation algorithms are suggested for formation and breaking of a few quark-gluon strings in inelastic pp collisions. Theoretical multiplicity distributions, semi-inclusive quasirapidity spectra, forward-backward correlations of charged secondaries and seagull effect agree well with the experimental data at ISR energies. In the framework of the model, the semi-inclusive two-particle correlations of quasirapidities depend upon the fraction of the spherical chains. The seagull effect is qualitatively interpretated

  10. Superconducting Quadrupoles for the ISR High Luminosity insertion Coil cross section

    CERN Multimedia

    1978-01-01

    This picture shows a cut out section of an ISR High Luminosity (low beta) Quadrupole. One can clearly see the distribution of conductors and spacers which produces the wanted quadrupolar field. The spacers are made of pure copper and the central pole of stainless steel.The superconducting wire may be seen in photo 8008591X. See also pictures 7702690X, 8008591X, 7702698X.

  11. Improvement in luminosity, background and chamber protection with beam scrapers in the ISR

    CERN Document Server

    Bryant, P; Johnsen, Kjell; Laeger, H; Montague, Brian William St. Leger; Neet, D; Schneider, F W; Turner, S

    1973-01-01

    The Intersecting Storage Rings (ISR) are equipped with beam scrapers used for various purposes such as improving luminosity, reducing background, beam diagnostics and for protection of machine components. A description is given of the different types of scrapers and of the results in the various applications obtained during the last year. In particular, the substantial improvements in luminosity and background by scraping are described. (3 refs).

  12. Improving ISR Radar Utilization (How I quit blaming the user and made the radar easier to use).

    Energy Technology Data Exchange (ETDEWEB)

    Doerry, Armin Walter

    2014-08-01

    In modern multi - sensor multi - mode Intelligence, Surveillance, and Reconnaissance ( ISR ) platforms, the plethora of options available to a sensor/payload operator are quite large, leading to an over - worked operator often down - selecting to favorite sensors an d modes. For example, Full Motion Video (FMV) is justifiably a favorite sensor at the expense of radar modes, even if radar modes can offer unique and advantageous information. The challenge is then to increase the utilization of the radar modes in a man ner attractive to the sensor/payload operator. We propose that this is best accomplished by combining sensor modes and displays into 'super - modes'. - 4 - Acknowledgements This report is the result of a n unfunded research and development activity . Sandia Natio nal Laboratories is a multi - program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE - AC04 - 94AL850 00.

  13. State of Washington Department of Health Radioactive air emissions notice of construction phase 1 for spent nuclear fuel project - cold vacuum drying facility, project W-441

    Energy Technology Data Exchange (ETDEWEB)

    Turnbaugh, J.E.

    1996-08-15

    This notice of construction (NOC) provides information regarding the source and the estimated annual possession quantity resulting from operation of the Cold Vacuum Drying Facility (CVDF). Additional details on emissions generated by the operation of the CVDF will be discussed again in the Phase 11 NOC. This document serves as a NOC pursuant to the requirements of WAC 246-247-060 for the completion of Phase I NOC, defined as the pouring of concrete for the foundation flooring, construction of external walls, and construction of the building excluding the installation of CVDF process equipment. A Phase 11 NOC will be submitted for approval prior to installing and is defined as the completion of the CVDF, which consisted installation of process equipment, air emissions control, and emission monitoring equipment. About 80 percent of the U.S. Department of Energy`s spent nuclear fuel (SNF) inventory is stored under water in the Hanford Site K Basins. Spent nuclear fuel in the K West Basin is contained in closed canisters while the SNF in the K East Basin is in open canisters, which allow free release of corrosion products to the K East Basin water.

  14. Coalitions of things: supporting ISR tasks via internet of things approaches

    Science.gov (United States)

    Preece, Alun; Taylor, Ian; Dawson, Andrew; Braines, Dave; O'Leary, Nick; Thomas, Anna; Tomsett, Richard; La Porta, Tom; Bakdash, Jonathan Z.; Zaroukian, Erin

    2017-05-01

    In the wake of rapid maturing of Internet of Things (IoT) approaches and technologies in the commercial sector, the IoT is increasingly seen as a key `disruptive' technology in military environments. Future operational environments are expected to be characterized by a lower proportion of human participants and a higher proportion of autonomous and semi-autonomous devices. This view is reflected in both US `third offset' and UK `information age' thinking and is likely to have a profound effect on how multinational coalition operations are conducted in the future. Much of the initial consideration of IoT adoption in the military domain has rightly focused on security concerns, reflecting similar cautions in the early era of electronic commerce. As IoT approaches mature, this initial technical focus is likely to shift to considerations of interactivity and policy. In this paper, rather than considering the broader range of IoT applications in the military context, we focus on roles for IoT concepts and devices in future intelligence, surveillance and reconnaissance (ISR) tasks, drawing on experience in sensor-mission resourcing and human-computer collaboration (HCC) for ISR. We highlight the importance of low training overheads in the adoption of IoT approaches, and the need to balance proactivity and interactivity (push vs pull modes). As with sensing systems over the last decade, we emphasize that, to be valuable in ISR tasks, IoT devices will need a degree of mission-awareness in addition to an ability to self-manage their limited resources (power, memory, bandwidth, computation, etc). In coalition operations, the management and potential sharing of IoT devices and systems among partners (e.g., in cross-coalition tactical-edge ISR teams) becomes a key issue due heterogeneous factors such as language, policy, procedure and doctrine. Finally, we briefly outline a platform that we have developed in order to experiment with human-IoT teaming on ISR tasks, in both

  15. Viewpoint. The decision to build the ISR and its consequences: the role of Victor Weisskopf

    International Nuclear Information System (INIS)

    Hine, Mervyn

    1995-01-01

    December 1995 marks the thirtieth anniversary of the decision by the CERN Council to approve the proposal by the then Director General Victor Weisskopf to build the Intersecting Storage Rings (ISR). It was probably the Council's most important decision since setting up the Laboratory, judging by its consequences for physics and for CERN over the following three decades. December is also the twenty-fifth anniversary of the startup of the machine which led to a period of developments in accelerator technology with far reaching consequences. They included the production of stable high current stacked beams with high interaction rates in the presence of non-linear resonances and space charge, the inventions of stochastic cooling and of beam instrumentation using Schottky scans, and the technology of large ultra-high vacuum chambers with controlled wall impedance and resonances, to name only a few. Two results from the ISR physics programme of similar importance for the future were the first observation of large particle and photon yields with high transverse momentum (indicative of quark-gluon processes deep inside the colliding protons), and the consequent development of concepts for detectors with full solid angle calorimetry and tracking coverage, now used on all colliders. The technical success of the machine and the significance of the physics results led to a radical switch in physicists' thinking everywhere, away from fixed targets and towards colliders as the way to higher collision energies for hadrons. The ISR ceased to be seen as a toy for accelerator builders and became a window into a future far beyond the possibilities of fixed target accelerators. The ISR advances in accelerator and detector technology stimulated the conversion of the SPS to a proton-antiproton collider and the similar conversion of the Fermilab machine, and led to the proposals for the Superconducting Supercollider (SSC) in the USA and the LHC in Europe, to plans for a

  16. Construction cost impact analysis of the U.S. Department of Energy mandatory performance standards for new federal commercial and multi-family, high-rise residential buildings

    International Nuclear Information System (INIS)

    Di Massa, F.V.; Hadley, D.L.; Halverson, M.A.

    1993-12-01

    In accordance with federal legislation, the U.S. Department of Energy (DOE) has conducted a project to demonstrate use of its Energy Conservation Voluntary Performance Standards for Commercial and Multi-Family High-Rise Residential Buildings; Mandatory for New Federal Buildings; Interim Rule (referred to in this report as DOE-1993). A key requisite of the legislation requires DOE to develop commercial building energy standards that are cost effective. During the demonstration project, DOE specifically addressed this issue by assessing the impacts of the standards on (1) construction costs, (2) builders (and especially small builders) of multi-family, high-rise buildings, and (3) the ability of low-to moderate-income persons to purchase or rent units in such buildings. This document reports on this project

  17. Nonfatal tool- or equipment-related injuries treated in US emergency departments among workers in the construction industry, 1998-2005.

    Science.gov (United States)

    Lipscomb, Hester J; Schoenfisch, Ashley L; Shishlov, Kirill S; Myers, Douglas J

    2010-06-01

    Individuals in the construction industry are exposed to a variety of tools and pieces of equipment as they work. Data from the National Institute for Occupational Safety and Health (NIOSH) occupational supplement to the National Electronic Injury Surveillance System (NEISS-Work) were used to characterize tool- and equipment-related injuries among workers in the construction industry that were treated in US emergency departments between 1998 and 2005. Based on a national stratified probability sample of US hospitals with 24 hr emergency services, NEISS-Work allows calculation of national injury estimates. Over the 8-year period between 1998 and 2005, we estimated 786,900 (95% CI 546,600-1,027,200) ED-treated tool- or equipment-related injuries identified by the primary or secondary source of injury code. These injuries accounted for a quarter of all ED-treated construction industry injuries. Although over 100 different tools or pieces of equipment were responsible for these injuries, seven were responsible for over 65% of the injury burden: ladders, nail guns, power saws, hammers, knives, power drills, and welding tools in decreasing order. Current injury estimates and their severity, marked by the proportion of cases that were not released after ED treatment, indicate interventions are particularly needed to prevent injuries associated with use of ladders as well as nail guns and power saws. Attention should focus on design and guarding to more efficiently prevent these injuries rather than simply calling for the training of workers in how to safely use a dangerous tool or piece of equipment. 2010 Wiley-Liss, Inc.

  18. Representation of potential information gain to measure the price of anarchy on ISR activities

    Science.gov (United States)

    Ortiz-Peña, Hector J.; Hirsch, Michael; Karwan, Mark; Nagi, Rakesh; Sudit, Moises

    2013-05-01

    One of the main technical challenges facing intelligence analysts today is effectively determining information gaps from huge amounts of collected data. Moreover, getting the right information to/from the right person (e.g., analyst, warfighter on the edge) at the right time in a distributed environment has been elusive to our military forces. Synchronization of Intelligence, Surveillance, and Reconnaissance (ISR) activities to maximize the efficient utilization of limited resources (both in quantity and capabilities) has become critically important to increase the accuracy and timeliness of overall information gain. Given this reality, we are interested in quantifying the degradation of solution quality (i.e., information gain) as a centralized system synchronizing ISR activities (from information gap identification to information collection and dissemination) moves to a more decentralized framework. This evaluation extends the concept of price of anarchy, a measure of the inefficiency of a system when agents maximize decisions without coordination, by considering different levels of decentralization. Our initial research representing the potential information gain in geospatial and time discretized spaces is presented. This potential information gain map can represent a consolidation of Intelligence Preparation of the Battlefield products as input to automated ISR synchronization tools. Using the coordination of unmanned vehicles (UxVs) as an example, we developed a mathematical programming model for multi-perspective optimization in which each UxV develops its own fight plan to support mission objectives based only on its perspective of the environment (i.e., potential information gain map). Information is only exchanged when UxVs are part of the same communication network.

  19. Correlations associated with particles produced at small angles in pp collisions at the CERN ISR

    CERN Document Server

    Albrow, M G; Benz, P; Bosnjakovic, B; Brooks, J R; Chang, C Y; Clegg, A B; Erné, F C; Kooijman, P; Loebinger, F K; McCubbin, N A; Murphy, P G; Radiojicic, D; Rudge, A; Sens, Johannes C; Sessoms, A L; Singh, J; Strolin, P; Timmer, J

    1976-01-01

    Data on correlations between momentum analysed protons, pions or K mesons, and charged particles produced in pp collisions at the CERN ISR are presented. The charged particles were detected in a approximately 4 pi scintillation counter hodoscope. The pseudo- rapidity distributions are well described by production within the limits of cylindrical phase space, with negative kaons and antiprotons yielding narrower distributions than protons, pions and positive kaons. The azimuthal distributions show symmetry around the t-channel axis in the rest frame of the recoiling mass M/sub X/ in pp to aX(a =detected proton, pion, positive kaon). (14 refs).

  20. New ISR and SPS collider multiplicity data and the Golokhvastov generalization of the KNO scaling

    International Nuclear Information System (INIS)

    Szwed, R.; Wrochna, G.

    1985-01-01

    The generalization of KNO scaling proposed by Golokhvastov (KNO-G scaling) is tested using pp multiplicity data, in particular results of the new high precision ISR measurements. Since the data obey KNO-G scaling over the full energy range √s=2.51-62.2 GeV with the scaling function psi(z), having only one free parameter, the superiority of the KNO-G over the standard approach is clearly demonstrated. The extrapolation within KNO-G scaling to the SPS Collider energy range and a comparison with the recent UA5 multiplicity results is presented. (orig.)

  1. Observation of high mass mu /sup +/ mu /sup -/ pairs at the ISR

    CERN Document Server

    Nagy, E; Broll, C; Coignet, G; Dibon, Heinz; Eichinger, H; Favier, Jean; Flügge, G; Gottfried, Christian; Neuhofer, G; Niebergall, F; Regler, Meinhard; Schmidt-Parzefall, W; Schubert, K R; Schumacher, P E; Vivargent, M; Winter, Klaus

    1975-01-01

    Observation of 16 mu /sup +/ mu /sup -/ pairs of invariant mass greater than 2.7 GeV/c/sup 2/ in the reaction pp to mu /sup +/ mu /sup -/+anything at square root s=52 GeV at the CERN Intersecting Storage Rings (ISR) is reported. These events can be interpreted as originating from J(3.1) decay into mu /sup +/ mu /sup -/. Their p/sub T/ distribution suggests a hadronic production. The cross section for J production is given and compared to the cross section for single lepton production. It is concluded that J(3.1) production cannot fully account for single lepton production. (10 refs).

  2. Inclusive π0 production at very large psub(T) at the ISR

    International Nuclear Information System (INIS)

    Kourkoumelis, C.; Resvanis, L.K.; Filippas, T.A.; Fokitis, E.; Fabjan, C.W.; Fields, T.; Lissauer, D.; Mannelli, I.; Mouzourakis, P.; Nappi, A.; Willis, W.J.; Goldberg, M.

    1979-01-01

    Inclusive π 0 production at 90 0 has been studied at the ISR at ssup(1/2) = 52.7 and 62.4 GeV over the psub(T) range from 7 to 15 GeV/c. The two photons from π 0 decay yielded overlapping electromagnetic showers in the liquid-argon-Pb plate calorimeter detector system. Any direct photon production is included in these measurements. For large values of psub(T), the cross section is observed to decrease with psub(T) more slowly than the psub(T) -8 behaviour which has been observed at lower values of psub(T). (Auth.)

  3. Negative particle production in the fragmentation region at the CERN ISR

    CERN Document Server

    Albrow, M G; Barber, D P; Bogaerts, A; Bosnjakovic, B; Brooks, J R; Clegg, A B; Erné, F C; Gee, C N P; Locke, D H; Loebinger, F K; Murphy, P G; Rudge, A; Sens, Johannes C; Van der Veen, F

    1973-01-01

    Data are reported on the production of pi /sup -/, K/sup -/ and p in proton-proton collisions at the CERN ISR. Measurements have been made at fixed c.m. angles in the range (x, p/sub T/)=(0.12, 0.16 GeV/c) to (x, p/sub T/)=(0.82, 1.1 GeV/c), over a range of squared c.m. energy 558

  4. Recuperation of ISR Dipole Magnet Yokes for Use as Shielding for the LHC Beam Dumps TDE

    CERN Document Server

    Ross, M

    1999-01-01

    The quantity of iron shielding required for two LHC dumps was estimated at about 1500 tons. Possible sources of slightly irradiated iron shielding were considered, in particular, the ISR dipole yokes, which were stocked in the I2. Of rectangular form and weighing 22 tons each, they were well suited to the LHC dump geometry. Furthermore, they were to all intents and purposes non-radioactive. The preferred solution was to cut off four lifting pads and three support plates using arc/air equipment, seal temporarily each end with shutters, fit two lifting "anchor" pins, and fill with concrete.

  5. Comparison of Vertical Drifts of ISR and Magnetometer Data Measurements at the Magnetic Equator

    Science.gov (United States)

    Condor P, P. J.

    2014-12-01

    We compare vertical drifts measured with the Jicamarca incoherent scatter radar (ISR) and drifts estimated from magnetometer data applying a Neural Network data processing technique. For the application of the Neural Network (NN) method, we use the magnitude of the horizontal (H) component of the magnetic field measured with magnetometers at Jicamarca and Piura (Peru). The data was collected between the years 2002 and 2013. In training the NN we use the difference between the magnitudes of the horizontal components (dH) measured at JRO (placed at the magnetic equator) and Piura (displaced 5° away). Additional parameters used are F10.7 and Ap indexes. The estimates obtained with the NN procedure are very good. We have an RMS error of 3.7 m/s using dH as an input of the NN while the error is 3.9 m/s when we use the component H of JRO as an input. The results are validated using the set of vertical drifts observations collected with the Jicamarca incoherent scatter radar. The estimated drifts can be accessed using the following website: http://jro.igp.gob.pe/driftnn. In the poster, we show the comparison of vertical drifts from 2002 to 2013 where we discuss the agreement between magnetometer and ISR data.

  6. Mounting an ISR intersection chamber in the Split Field Magnet(SFM)

    CERN Multimedia

    1977-01-01

    The Split Field Magnet (SFM) was the largest spectrometer for particles from beam-beam collisions in the ISR. It could determine particle momenta in a large solid angle, but was designed mainly for the analysis of forward travelling particles.As the magnet was working on the ISR circulating beams, its magnetic field had to be such as to restore the correct proton orbit.The SFM, therefore, produced zero field at the crossing point and fields of opposite signs upstream and downstream of it and was completed by 2 large and 2 small compensator magnets. The gradient effects were corrected by magnetic channels equipped with movable flaps. The useful magnetic field volume was 28 m3, the induction in the median plane 1.14 T, the gap heigth 1.1 m, the length 10.5 m, the weight about 1000 ton.Concerning the detectors, the SFM was the first massive application of multiwire proportional chambers (about 70000 wires) which filled the main and the large compensator magnets. In the course of the years different types of vacu...

  7. The new ISR and collider anti p-p and p-p data and asymptotic theorems

    International Nuclear Information System (INIS)

    Nicolescu, B.

    1982-10-01

    We present a general discussion of the rigorous finite-energy effects of asymptotic theorems, with a special emphasis on the confrontation with the new ISR and collider antipp and pp total cross-section data. We point out the possible existence of a minimum in the difference between the antipp and pp total cross-sections

  8. Second generation "Flat-Fish" vacuum chamber for an ISR intersection

    CERN Multimedia

    CERN PhotoLab

    1977-01-01

    The picture shows the part of the "Flat-Fish" chamber covering one side of the beam intersection region. The other side is covered by an equal part and both are welded toghether at their small end. The two shells of each part were hydroformed from 0.15 mm thick inconel 718 sheet (with end parts in inconel 600 for easier manual welding to the arms) and welded toghether with two strips which were attached by means of stainless steel strings to the Split Field Magnet poles in order to take the atmospheric pressure forces. This was the thinnest vacuum chamber made for the ISR. Inconel material was chosen for its high elastic modulus and strenght at chamber bake-out temperature.

  9. Reconnaissance blind multi-chess: an experimentation platform for ISR sensor fusion and resource management

    Science.gov (United States)

    Newman, Andrew J.; Richardson, Casey L.; Kain, Sean M.; Stankiewicz, Paul G.; Guseman, Paul R.; Schreurs, Blake A.; Dunne, Jeffrey A.

    2016-05-01

    This paper introduces the game of reconnaissance blind multi-chess (RBMC) as a paradigm and test bed for understanding and experimenting with autonomous decision making under uncertainty and in particular managing a network of heterogeneous Intelligence, Surveillance and Reconnaissance (ISR) sensors to maintain situational awareness informing tactical and strategic decision making. The intent is for RBMC to serve as a common reference or challenge problem in fusion and resource management of heterogeneous sensor ensembles across diverse mission areas. We have defined a basic rule set and a framework for creating more complex versions, developed a web-based software realization to serve as an experimentation platform, and developed some initial machine intelligence approaches to playing it.

  10. Measurement of two-particle semi-inclusive rapidity distributions at the CERN ISR

    CERN Document Server

    Amendolia, S R; Bosisio, L; Braccini, Pier Luigi; Bradaschia, C; Castaldi, R; Cavasinni, V; Cerri, C; Del Prete, T; Finocchiaro, G; Foà, L; Giromini, P; Grannis, P; Green, D; Jöstlein, H; Kephart, R; Laurelli, P; Menzione, A; Ristori, L; Sanguinetti, G; Thun, R; Valdata, M

    1976-01-01

    Data are presented on the semi-inclusive distributions of rapidities of secondary particles produced in pp collisions at very high energies. The experiment was performed at the CERN Intersecting Storage Rings (ISR). The data given, at centre-of-mass energies of square root s=23 and 62 GeV, include the single-particle distributions and two-particle correlations. The semi-inclusive correlations show pronounced short-range correlation effects which have a width considerably narrower than in the case of inclusive correlations. It is shown that these short-range effects can be understood empirically in terms of three parameters whose energy and multiplicity dependence are studied. The data support the picture of multiparticle production in which clusters of small multiplicity and small dispersion are emitted with subsequent decay into hadrons. (32 refs).

  11. ISR mining of uranium in the permafrost zone, Khiagda Mine (Russian Federation)

    International Nuclear Information System (INIS)

    Solodov, I.

    2014-01-01

    The “Khiagda” mine in the Republic of Buryatia is the only ISR mine in the world where ore mining is performed in a permafrost region. Its raw material source is deposits of the Khiagdinsky ore field having geological reserves of uranium to 48 thousand tonnes. The ore field is a part of the Vitimsky Uranium ore district with reserves of 100 thousand tonnes. This is the most promising region in Russia where the deposits may be extracted by the ISR technique. Throughout a year, the air temperatures varies from +35 to –50°C. Permafrost is developed everywhere to a depth of 90 m. The Khiagdinsky ore field includes 8 deposits. The ore-bearing paleovalleys down-cut the slopes of the granite rise. The ore accumulations are localised in alluvial sandy water-saturated Miocene deposits overlaying the crust formations of the granite basement. They are overlapped by the cover of basalts and volcanogenic sedimentary deposits. The ore accumulations occurrence under the cover of frozen basalts at the depths 90 to 280 m. Uranium in ores is presented by ningyoite; it is significantly reduced, comprising up to 90-100% U(IV). Mining of such ores by the acidic ISR without an oxidant is of low effectiveness. The orebearing sands are quartz-feldspar and practically noncalcareous. The acid consumption caused by chlorites and montmorillonites is at the medium level, 90 kg/tonne. The ore-bearing deposits, according to the filtration tests, have the filtration coefficient (hydraulic conductivity) of 2.1 (1.4–3.7) m/day and water transmissivity of 50 (24–105) m"2/day. The accumulations are inundated irregularly. In the lower reaches of the paleovalleys, the output of the pumping-out wells varies from 5 to 9 m"3/hour, and in the upper reaches it ranges from 2 to 5 m"3/hour. The temperature of the formation waters is 1 to 4°C. The rigorous climatic conditions, high degree of uranium reduction in ores, complicated hydrogeological conditions and high viscosity of the very cold

  12. AGS - The ISR computer program for synchrotron design, orbit analysis and insertion matching

    International Nuclear Information System (INIS)

    Keil, E.; Marti, Y.; Montague, B.W.; Sudboe, A.

    1975-01-01

    This is a detailed guide to the use of the current version of a FORTRAN program for carrying out computations required in the design or modification of alternating-gradient synchrotrons and storage rings. The program, which runs on the CDC 7600 computer at CERN, computes linear transformation functions, and modifications of parameters to achieve specified properties; it tracks sets of particle trajectories, finds closed orbits when elements of the structure are displaced, computes the equilibrium orbit, designs closed-orbit bumps, tracks betatron functions through the structure, and matches insertions in the structure to specified betatron and dispersion functions. The report supersedes CERN 69-5 (AGS - The ISR computer system for synchrotron design and orbit analysis, by E. Keil and P. Strolin). (Author)

  13. Feasibility study for a B-meson factory in the CERN ISR tunnel

    International Nuclear Information System (INIS)

    Nakada, T.

    1990-01-01

    A feasibility study has been made for a B-meson factory, using the ISR tunnel and the LEP injector at CERN. An electron-positron collider operated with asymmetric beam energies of 8 and 3.5 GeV at a luminosity of 10 34 cm -2 s -1 will permit decisive answers on the question of CP violation within the framework of the Standard Model. This report outlines the physics motivation and detector requirements and gives a description of the machine design. It is proposed that the design goal is reached in two stages, with a collider with two rings of equal size. In the first stage a luminosity of 10 33 cm -2 s -1 may be achieved, allowing a rich programme of charm, beauty and τ-lepton physics. A further tenfold increase of the luminosity would require additional R and D on various machine aspects. (orig.)

  14. The crystal zero degree detector for ISR tagging at BES III

    Energy Technology Data Exchange (ETDEWEB)

    Denig, Achim; Redmer, Christoph [Johannes Gutenberg Universitaet Mainz (Germany); Koch, Leonard; Kuehn, Wolfgang; Lange, Soeren; Liang, Yutie; Wagner, Milan [Justus-Liebig-Universitaet Giessen (Germany); Collaboration: BESIII-Collaboration

    2016-07-01

    The BES III experiment at the BEPCII electron positron collider in Beijing is collecting data in the charm-τ mass region. Being strongly peaked towards small polar angles, photons from initial state radiation (ISR) are detected with limited efficiency. In order to increase the detection efficiency of these photons, we propose a small detector comprised of two arrays of scintillating crystals separated by a small gap to be placed in the very forward and backward region. The crystals will be read out by SiPMs and the signal will be digitized by a feature extracting flash ADC. This data stream is correlated with the BESIII trigger in realtime on FPGA based hardware. The detectors response has been simulated using GEANT4 and the energy resolution has been obtained. A beam test of a prototype has demonstrated the stably running of the DAQ.

  15. On-line use of the 168/E emulator at the CERN ISR SFM detector

    International Nuclear Information System (INIS)

    Bertuzzi, C.; Drijard, D.; Frehse, H.; Gavillet, P.; Gokieli, R.; Innocenti, P.G.; Messerli, R.; Mornacchi, G.; Norton, A.; Porte, J.P.

    1981-01-01

    The Split Field Magnet Detector at the CERN ISR has been used in recent years to study events with a high transverse momentum charged particle. As a first level computer based trigger a linear estimate of the track momentum by fixed point arithmethic was calculated on-line by a minicomputer. In addition appreciable further rejection was obtained by off-line filtering on the IBM-370/168, using pattern recognition and a fit of the triggering particle in the magnetic field. The availability of the 168/E emulator makes it possible to transfer the proven methods used off-line to real time data reduction. Preliminary results on filter efficiency and speed for an experiment triggering on a high Psub(T) hadron at 10 to 20 0 with respect to the outgoing beam (Exp. R 419) are given. Possible improvements and extensions are discussed. (orig.)

  16. CERN News: Slow ejection efficiency at the PS; Vacuum tests on the ISR; Fire in the neutrino beam-line; Prototype r.f . cavity for the Booster; Crane-bridge in ISR experimental hall; Modifications to the r.f . system at the PS

    CERN Multimedia

    1969-01-01

    CERN News: Slow ejection efficiency at the PS; Vacuum tests on the ISR; Fire in the neutrino beam-line; Prototype r.f . cavity for the Booster; Crane-bridge in ISR experimental hall; Modifications to the r.f . system at the PS

  17. Ross In Situ Uranium Recovery Project NESHAP Subpart W Construction Approval

    Science.gov (United States)

    On May 5, 2015, EPA issued a Construction Approval under the National Emission Standards for Hazardous Air Pollutants (NESHAPs) at 40 CFR Part 61, subpart W, to Strata Energy, Inc., for their Ross In Situ Recovery (ISR) Uranium Project in Crook County, WY.

  18. Research on Service-Integrating-Based C4ISR System Simulation Environment%基于服务集成的C4ISR系统仿真环境研究

    Institute of Scientific and Technical Information of China (English)

    鲍广宇; 毛少杰; 居真奇; 刘晓明

    2008-01-01

    The future C4ISR systems will be based on the information grid environment, which is constructed with service-integrating technology. According to this, Modeling and Simulation (M&S) of C41SR systems will be based on the service-integrating technology, too. Firstly the principle of service-integrating was introduced, and then a service-integrating-based simulation environment was proposed to support the C4ISR system simulation and experiments in an SOA environment.%未来的C4ISR系统将建立在使用服务集成技术的信息栅格环境下,相应地,C4ISR建模与仿真系统也将基于服务集成技术构建.介绍了服务集成技术的原理,基于仿真服务总线技术,提出一个基于服务集成的C4ISR系统仿真环境,分析了该环境的技术体系结构和关键技术,为支持面向服务体系下的C4ISR系统仿真实验提供了一种可选解决方案.

  19. Smooth muscle enfoldment internal sphincter construction after intersphincteric resection for rectal cancer.

    Directory of Open Access Journals (Sweden)

    Heiying Jin

    Full Text Available To assess smooth muscle enfoldment and internal sphincter construction (SMESC for improvement of continence after intersphincteric resection (ISR for rectal cancer.Twenty-four Bama miniature pigs were randomly divided into a conventional ISR group and experimental SMESC group, with 12 pigs in each group. The proximal sigmoid colon was anastomosed directly to the anus in the ISR group. In the SMESC group, internal sphincter construction was performed. At 12 weeks before and after surgery, rectal resting pressure and anal canal length were assessed. Three-dimensional ultrasound was used to determine the thickness of the internal sphincter. After the animals were sacrificed, the rectum and anus were resected and pathological examinations were performed to evaluate the differences in sphincter thickness and muscle fibers.All 24 animals in the SMESC group and the ISR group survived the surgery. Twelve weeks post-surgery, the rectal resting pressure, length of the anal high-pressure zone and the postoperative internal sphincter thickness for the ISR group were significantly lower than for the SMESC group. There was a thickened area (about 2 cm above the anastomotic stoma among animals from the SMESC group; in addition, the smooth muscles were significantly enlarged and enfolded when compared to the ISR group.This animal model study shows that the SMESC procedure achieved acceptable reconstruction of the internal anal neo-sphincter (IAN/S, without increasing surgical risk. However, the findings in this experimental animal model must be confirmed by clinical trials to determine the safety and efficacy of this procedure in clinical practice.

  20. Smooth muscle enfoldment internal sphincter construction after intersphincteric resection for rectal cancer.

    Science.gov (United States)

    Jin, Heiying; Zhang, Bei; Yao, Hang; Du, Yonghong; Wang, Xiaofeng; Leng, Qiang

    2014-01-01

    To assess smooth muscle enfoldment and internal sphincter construction (SMESC) for improvement of continence after intersphincteric resection (ISR) for rectal cancer. Twenty-four Bama miniature pigs were randomly divided into a conventional ISR group and experimental SMESC group, with 12 pigs in each group. The proximal sigmoid colon was anastomosed directly to the anus in the ISR group. In the SMESC group, internal sphincter construction was performed. At 12 weeks before and after surgery, rectal resting pressure and anal canal length were assessed. Three-dimensional ultrasound was used to determine the thickness of the internal sphincter. After the animals were sacrificed, the rectum and anus were resected and pathological examinations were performed to evaluate the differences in sphincter thickness and muscle fibers. All 24 animals in the SMESC group and the ISR group survived the surgery. Twelve weeks post-surgery, the rectal resting pressure, length of the anal high-pressure zone and the postoperative internal sphincter thickness for the ISR group were significantly lower than for the SMESC group. There was a thickened area (about 2 cm) above the anastomotic stoma among animals from the SMESC group; in addition, the smooth muscles were significantly enlarged and enfolded when compared to the ISR group. This animal model study shows that the SMESC procedure achieved acceptable reconstruction of the internal anal neo-sphincter (IAN/S), without increasing surgical risk. However, the findings in this experimental animal model must be confirmed by clinical trials to determine the safety and efficacy of this procedure in clinical practice.

  1. Measurement of the Antiproton-Proton Total Cross-Section at the CERN ISR

    CERN Multimedia

    2002-01-01

    This experiment is a measurement of small angle scattering of antiprotons on protons and of protons on protons at 15/15, 22/22, 26/26 and 31/31 GeV, with the aim of obtaining data on the total cross-section for the scattering of protons on protons, and of determining the ratio of the real to the imaginary scattering amplitude at zero momentum transfer for antiprotons on protons. The measurement is divided into two parts: \\item 1) The measurement of @s^t^o^t(@*p) and @s^t^o^t(pp), using hodoscopes placed at small angles, outside the vacuum pipe, at approximately 9 metres from the intersection point. \\item 2) The measurement of the region in !t!, the momentum transfer squared, around the value !t^c!, where Coulomb and nuclear scattering are equal, in order to deduce the quantity @r = Re f(t=0)/Im f(t=0). This latter measurement is done by employi in earlier @s^t(pp) and @r experiments at the ISR. \\end{enumerate} In both set-ups the measurements are made by recording coincidences between collinear counters in th...

  2. Kestrel: force protection and Intelligence, Surveillance, and Reconnaissance (ISR) persistent surveillance on aerostats

    Science.gov (United States)

    Luber, David R.; Marion, John E.; Fields, David

    2012-05-01

    Logos Technologies has developed and fielded the Kestrel system, an aerostat-based, wide area persistent surveillance system dedicated to force protection and ISR mission execution operating over forward operating bases. Its development included novel imaging and stabilization capability for day/night operations on military aerostat systems. The Kestrel system's contribution is a substantial enhancement to aerostat-based, force protection systems which to date have relied on narrow field of view ball gimbal sensors to identify targets of interest. This inefficient mechanism to conduct wide area field of view surveillance is greatly enhanced by Kestrel's ability to maintain a constant motion imagery stare of the entire forward operating base (FOB) area. The Kestrel airborne sensor enables 360° coverage out to extended ranges which covers a city sized area at moderate resolution, while cueing a narrow field of view sensor to provide high resolution imagery of targets of interest. The ground station exploitation system enables operators to autonomously monitor multiple regions of interest in real time, and allows for backtracking through the recorded imagery, while continuing to monitor ongoing activity. Backtracking capability allows operators to detect threat networks, their CONOPS, and locations of interest. Kestrel's unique advancement has already been utilized successfully in OEF operations.

  3. Formation of the Chi 1 and Chi 2 charmonium states in pantip annihilation at the ISR

    International Nuclear Information System (INIS)

    Fay, J.

    1986-01-01

    R704 experiment has studied the Chi 1 and Chi 2 charmonium states (cantic) in their J/Psi Gamma decay. These states are directly formed in the interaction of a hydrogen molecular jet target with a antiprotons beam permanently cooled, circulating in the ring 2 of the ISR. This process allows a high luminosity to be reached (up to 3 10 30 cm -2 s -1 ). The huge hadronic background leads to detect only electromagnetic final states. The detector is a two-arm no magnetic spectrometer in two parts. The first one is devoted to charged particle detection: tracking (MWPC, scintillators) and electron identification (Cerenkov). The second one forms a calorimeter measuring the position and the energy of photons and electrons (lead-scintillator sandwiches, proportional chambers using analogue read-out and lead-glass wall). Event selection is based on Psi identification from two electron tracks (one in each arm) and search for the radiated photon reconstructed from the Chi decay kinematics. For Chi 1 and Chi 2 respectively, a set of 32 and 55 events is found with a negligeable background level and one obtains values on mass, width and branching ratios on pantip. These results are compared with theoretical prediction from QCD inspired models: masses are well described by potential methods and sum rules (within a 10 MeV uncertainly). For the widths, only a raw value can be achieved while branching ratios are in good agreement with our measurements [fr

  4. Development of Digital I and C System using C4ISR Architect Framework

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Jae Cheon [KEPCO, Ulsan (Korea, Republic of); Quang, Phamle [Ninh Thuan Nuclear Power Project Management Board, Province (Viet Nam)

    2014-08-15

    The architect framework for the digital I and C system is presented in this work. With rapid changes in digital I and C technology, there is a strong need to provide uniform methods to describe the system functions and their performance in context with the physical configuration and logical behavior. C4ISR framework would provide the process and method for the digital system in that it allows the three different views of operational, systems and services, and technical standards. Therefore, stake holders can share information that is related to the system interfaces, the actions or activities that those components perform, and rules or constraints for those activities from the initial state of system development. As a result, the life cycle cost and development time for the digital I and C system can also be optimized. These benefits can be obtained by introducing views and products to reveal the logical, behavioral, and performance characteristics of the architecture. To prove this approach, the plant protection system (PPS) is chosen and the measure of effectiveness (MOE) is evaluated. An MOE of PPS is introduced as: functional effectiveness, performance effectiveness, and interoperability effectiveness.

  5. [The trial of business data analysis at the Department of Radiology by constructing the auto-regressive integrated moving-average (ARIMA) model].

    Science.gov (United States)

    Tani, Yuji; Ogasawara, Katsuhiko

    2012-01-01

    This study aimed to contribute to the management of a healthcare organization by providing management information using time-series analysis of business data accumulated in the hospital information system, which has not been utilized thus far. In this study, we examined the performance of the prediction method using the auto-regressive integrated moving-average (ARIMA) model, using the business data obtained at the Radiology Department. We made the model using the data used for analysis, which was the number of radiological examinations in the past 9 years, and we predicted the number of radiological examinations in the last 1 year. Then, we compared the actual value with the forecast value. We were able to establish that the performance prediction method was simple and cost-effective by using free software. In addition, we were able to build the simple model by pre-processing the removal of trend components using the data. The difference between predicted values and actual values was 10%; however, it was more important to understand the chronological change rather than the individual time-series values. Furthermore, our method was highly versatile and adaptable compared to the general time-series data. Therefore, different healthcare organizations can use our method for the analysis and forecasting of their business data.

  6. Precise Measurement of the $\\bar{p}p$ Total Cross-Section in the ISR Energy Range

    CERN Multimedia

    2002-01-01

    The major aim of this experiment is the precise measurement of the antiproton-proton total cross-section in the ISR energy range, using the total-rate method. The proton-proton total cross-section is remeasured with the same method and the same apparatus, and a precision of 0.5\\% is expected for both cross-sections. The total-rate method consists in the simultaneous measurement of the total interaction rate and the ISR luminosity. This is done with a set of scintillation-counter hodoscopes covering over 99.99\\% of the solid angle, which are sensitive to over 95\\% of all interactions. In addition to these detectors, small-angle drift-tube hodoscopes are used to measure the differential elastic cross-section as a function of the momentum transfert t. The total cross-section can be measured independently by extrapolating this differential cross-section to the forward direction and invoking the optical theorem. A study of the general features of charged-particle production is performed using finely divided scinti...

  7. Federal Environmental Requirements for Construction

    Data.gov (United States)

    Department of Veterans Affairs — This guide provides information on federal environmental requirements for construction projects. It is written primarily for owners of construction projects and for...

  8. Metallurgy Department

    DEFF Research Database (Denmark)

    Risø National Laboratory, Roskilde

    The activities of the Metallurgy Department at Risø during 1981 are described. The work is presented in three chapters: General Materials Research, Technology and Materials Development, Fuel Elements. Furthermore, a survey is given of the department's participation in international collaboration...

  9. 10 October 2013 - D. Braun First Deputy Minister for Regional Development, Czech Republic, P. Styczeń Deputy Minister of Transport, Construction and Maritime Economy, Republic of Poland and F. Palko State Secretary, Ministry of Transport, Construction and Regional Development, Slovak Republic visiting the LHC tunnel at Point 1 with Technology Department, Vacuum, Surfaces and Coatings Group Leader J. M. Jimenez and signing the Guest book with CERN Director-General R. Heuer

    CERN Multimedia

    Anna Pantelia

    2013-01-01

    10 October 2013 - D. Braun First Deputy Minister for Regional Development, Czech Republic, P. Styczeń Deputy Minister of Transport, Construction and Maritime Economy, Republic of Poland and F. Palko State Secretary, Ministry of Transport, Construction and Regional Development, Slovak Republic visiting the LHC tunnel at Point 1 with Technology Department, Vacuum, Surfaces and Coatings Group Leader J. M. Jimenez and signing the Guest book with CERN Director-General R. Heuer

  10. Proposal for the Purchase, Without a New Call for Tenders, of Four Additional Superconducting Quadrupole Magnets for the Duplication of the Low-Beta Insertion of the CERN Intersecting Storage Rings (ISR)

    CERN Document Server

    1978-01-01

    Proposal for the Purchase, Without a New Call for Tenders, of Four Additional Superconducting Quadrupole Magnets for the Duplication of the Low-Beta Insertion of the CERN Intersecting Storage Rings (ISR)

  11. Department o

    African Journals Online (AJOL)

    USER

    2016-10-31

    Oct 31, 2016 ... Department of Urban and Regional Planning, University of Ibadan, Oyo State, Nigeria. 2 ... Geospatial techniques were used for this study; data from primary and secondary source ... development, for instance, Nigeria cities .... (road network, road medians and water ..... Countries: A Case Study of Nigeria.

  12. Electronics department

    International Nuclear Information System (INIS)

    1979-01-01

    This report summarizes the activities in 1978 of some of the groups within the Electronics Department. The work covered includes plant protection and operator studies, reliability techniques, application of nuclear techniques to mineral exploration, applied laser physics, computing and, lastly, research instrumentation. (author)

  13. How will the Indian military's upgrade and modernization of its ISR, precision strike, and missile defense affect the stability in South Asia?

    OpenAIRE

    Dewan, Jay P.

    2005-01-01

    Approved for public release, distribution is unlimited India has made a concerted effort to upgrade its ISR, precision strike, and missile defense capabilities as it competes with China and Pakistan for regional power. The Phalcon Airborne Warning and Control System, Su-30MKI fighter-bomber aircraft, and S-300PMU surface-to-air missile system are some examples of the new capabilities India is acquiring. I argue that if India continues its military modernization, Pakistan will become more i...

  14. Looking Through the Fog: United States National Security Strategy, National Military Strategy, Air Force Doctrine and the Impacts to ISR (1990-2012)

    Science.gov (United States)

    2013-06-01

    notwithstanding any other provision of law , no person shall be subject to a penalty for failing to comply with a collection of information if it does not...attempt to reconcile the complex organizational ecosystem that constitutes the DOD ISR enterprise. The modern enterprise remains a reflection of...rights. 3. The Western Hemisphere – must control insurgencies, support NAFTA arrangements, and work with non-govt organizations to support

  15. Study of $pp$ and $p\\bar{p}$ Collisions at the SFM Facility of the CERN ISR

    CERN Multimedia

    2002-01-01

    In an analysis of ``minimum bias'' data taken in experiment R415 it was shown that if this data is analysed in terms of a new energy variable E^h^a^d, obtained by correcting the ISR c.m. energy for the energy carried away by the leading protons, then there is a remarkable similarity between (pp) and (e|+e|-) interactions. The range of (e|+e|-) equivalent energies over which the data could be analysed was limited by the total c.m. energy of the colliding protons (@Rs=62~GeV). \\\\ \\\\ This experiment at the Split Field Magnet uses a momentum-selective trigger logic to collect an enriched sample of events with identified leading protons or antiprotons, covering an extended range of equivalent (e|+e|-) energies by collecting data at different~@Rs.\\\\ \\\\ A first run with proton-proton at three different @Rs (30, 44 and 62~GeV) was already performed. \\\\ \\\\ The hypothesis that the energy released by the leading protons, and not @Rs, is the important quantity when studying low p^t multiparticle production in (pp) collis...

  16. Precision measurement of the e+e- → π+π-(γ) cross-section with ISR method

    International Nuclear Information System (INIS)

    Wang, L.L.

    2009-05-01

    Vacuum polarization integral involves the vector spectral functions which can be experimentally determined. As the dominant uncertainty source to the integral, the precision measurement of the cross section of e + e - → π + π - (γ) as a function of energy from 2π threshold to 3 GeV is performed by taking the ratio of e + e - → π + π - (γ) cross section to e + e - → μ + μ - (γ) cross section which are both measured with BABAR data using ISR method in one analysis. Besides that taking the ratio of the cross sections of the two processes can cancel several systematic uncertainties, the acceptance differences between data and Monte Carlo results are measured using the same data, and the corresponding corrections are applied on the efficiencies predicted by Monte Carlo method which can control the uncertainties. The achieved final uncertainty of the born cross section of e + e - → π + π - (γ) in ρ mass region (0.6 ∼ 0.9 GeV) is 0.54%. As a consequence of the new vacuum polarization calculation using the new precision result of the e + e - π + π - (γ) cross section, the impact on the standard model prediction of muon anomalous magnetic moment g - 2 is presented, which is also compared with other data based predictions and direct measurement. (author)

  17. An Analysis of the Military Family Housing Construction Contractor Supplier Base at MCB Camp Pendleton and a Report on How an Understanding of These Trends May Improve the Acquisition Strategy for the Department of Defense

    National Research Council Canada - National Science Library

    Cannon, Stephen

    2001-01-01

    ...? The study surveyed potential Public Private Venture (PPV) developers and current housing construction contractors' attitudes towards the Navy's recent trend in the design, construction, and maintenance of Marine Corps military family housing...

  18. Construction Minerals Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes construction minerals operations in the United States. The data represent commodities covered by the Minerals Information Team (MIT) of the...

  19. INDOT Construction Inspection Priorities

    Science.gov (United States)

    2012-05-01

    In the last decade, the Indiana Department of Transportation (INDOT) has experienced an increase in their construction projects (e.g., INDOTs : construction spending was $789 million in 2006 and increased to $1,081.4 million in 2010); while the le...

  20. Preliminary full size test of a simplified version of the CMS link alignment system at the ISR hall

    International Nuclear Information System (INIS)

    Arce, P.; Calvo, E.; Figueroa, C.F.; Garcia, N.; Matorras, F.; Rodrigo, T.; Vila, I.; Virto, A.L.; Fernandez, M.G.; Ferrando, A.; Josa, M.I.; Molinero, A.; Oller, J.C.

    1999-01-01

    A preliminary full size test of a simplified version containing some relevant elements of the CMS (compact muon solenoid) Link Alignment System has been installed in an experimental area of the ISR (interaction storage ring) tunnel at CERN. Previously a calibration bench was prepared with standard precise survey methods. The environmental conditions, temperature, atmospheric pressure and relative humidity in the hall were controlled revealing quite stable conditions all along the tests period. The stability measurements done under these conditions show that the light spot on sensors located at about 6 m from the light source are smaller than 5 μm, which satisfies the requirements. Induced changes in the environmental conditions have different effects. Air flows degrades significantly the spatial resolution (∼5μm) but the background due to the environmental light does not degrades the resolution in position reconstruction. A geodesic network defines a reference system common to all opto-mechanical components and can be used to do absolute measurements of the angle between the two light beams coming out from the splitter. The accuracy in the reconstruction of angles with the help of the geodesic network depends on the errors in the network definition. These errors propagate with a smaller or larger strength depending on the distances between the network points. In our tests, the accuracy in the angle reconstruction is 14 μrad when using 4 in and 5.9 m long arms and 17 μrad for 4 m and 2.9 m arms. We found a precision 4 μrad in the angular reconstruction. (authors)

  1. Proposal of a concept of the land brigade C4ISR system

    Directory of Open Access Journals (Sweden)

    Mladen M.Manjak

    2011-04-01

    Full Text Available This paper describes the structure of a concept of the land brigade command information system that is a product of the research work of numerous experts throughout the years done in the then-Yugoslav Army, Army of Serbia and Montenegro and today's Army of the Republic of Serbia. The institution formed for this purpose is the Centre for Command Information Systems and Information Support where command information systems are studied continuously and systematically. Today the KIS represents a primary source needed to obtain an efficient military command management system and an instrument for multiplying combat power without increasing the number of units and combat resources. The KIS is a complex multidisciplinary system requiring the implementation of prototype evolution methodology. Due to its complexity, importance end sensitivity, the KIS has to be realized in one's own military R&D institutions belonging to the Ministry of defense, because only these institutions have adequate knowledge and facilities. Fast and ad-hoc solutions in this area are unacceptable from the military, specialized and economic point of view. The primary KIS br KoV structure concept relies on six types of KIS, five technical subsystems and a number of adequate information systems. The key segment are technical systems that represent one open technical and technological (hardware and software platform in the realization of any KIS type. The KIS is a dynamic permanent system following the users' needs and technical technology changes. It is not, therefore, a closed and finally defined system, it is the system in continuous evolution, under construction and implementations. Introduction The concept described in this paper is the result of work of numerous people, authors included, engaged in the last twenty years of KIS research. The real balance of forces in combat does not depend so much on the potentials of warring parties but rather on the efficiency of command of

  2. The production of photons with large transverse momentum in proton-proton interaction at high energy in the center of mass, at the ISR of CERN

    International Nuclear Information System (INIS)

    Riedinger, Michel.

    1977-01-01

    The production of photons with large transverse momentun emitted in pp interactions at high energy, at the ISR of CERN, is studied. The inclusive distributions of photons were measured in the interval 0.7 2 sigma sub(γ)/dpdΩ=Aexp(Bpsub(t)+Cpsub(t) 2 ). The π 0 cross sections were deduced from these photon cross sections. At psub(t)( 2 at 3GeV /c), than the approximately exp(-6psub(t)) decrease, as well as an increase with the energy √s. A fit of the π 0 cross-sections, compatible with a power-law behaviour is given [fr

  3. Direct electrons at the CERN ISR. II. A study of the transverse momentum dependence above 0.6 GeV/c

    International Nuclear Information System (INIS)

    Buesser, F.W.; Camilleri, L.; Di Lella, L.

    1975-01-01

    The previously reported observation of direct electrons produced in proton-proton collisions at the CERN ISR was extended to transverse moments, p*/sub T/, as low as 0.6 GeV/c. The ratio of electron to pion cross sections seems to rise as p*/sub T/ is decreased. It increases by at most a factor of 2 between p*/sub T/ of 2 and 0.6 GeV/c. Results on the s-dependence of this ratio and on correlated charged particles are presented for p*/sub T/ greater than or equal to 1 GeV/c in another work

  4. The study on spatial distribution features of radiological plume discharged from Nuclear Power Plant based on C4ISRE

    Science.gov (United States)

    Ma, Yunfeng; Shen, Yue; Feng, Bairun; Yang, Fan; Li, Qiangqiang; Du, Boying; Bian, Yushan; Hu, Qiongqong; Wang, Qi; Hu, Xiaomin; Yin, Hang

    2018-02-01

    When the nuclear emergency accident occurs, it is very important to estimate three-dimensional space feature of the radioactive plume discharged from the source term for the emergency organization, as well as for better understanding of atmospheric dispersion processes. So, taking the Hongyanhe Nuclear Power Plant for example, the study for three-dimensional space feature of the radioactive plume is accomplished by applying atmospheric transport model (coupling of WRF-HYSPLIT) driven by FNL meteorological data of NCEP (04/01/2014-04/02/2014) based on the C4ISRE (Command, Control, Communications, Computer, Intelligence, Surveillance, Reconnaissance, Environmental Impact Assessment).The results show that the whole shape of three-dimensional plume was about irregular cloth influenced by wind; In the spatial domain (height > 16000m),the distribution of radiological plume, which looked more like horseshoe-shaped, presented irregular polygons of which the total length was 2258.7km, where covered the area of 39151km2; In the airspace from 4000m to 16000m, the plume, covered the area of 116269 km2, showed a triangle and the perimeter of that was 2280.4km; The shape of the plume was more like irregular quadrilateral, its perimeter was 2941.8km and coverage area of the plume was 131534km2;The overall distribution of the wind field showed a rectangular shape; Within the area along the horizontal direction 400m from origin to east and under height (lower than 2000m),the closer the distance coordinate (0,0), the denser the plume particles; Within the area of horizontal distance(500m-1000m) and height (4000m- 16000m), the particle density were relatively sparse and the spread extent of the plume particles from west to East was relatively large and the plume particles were mainly in the suspended state without obvious dry sedimentation; Within the area of horizontal distance (800m-1100m) and height (>16000m), there were relatively gentle horizontal diffusion of plume particles

  5. Comments on "Long-Term Variations of Exospheric Temperature Inferred From foF1 Observations: A Comparison to ISR Ti Trend Estimates" by Perrone and Mikhailov

    Science.gov (United States)

    Zhang, Shun-Rong; Holt, John M.; Erickson, Philip J.; Goncharenko, Larisa P.

    2018-05-01

    Perrone and Mikhailov (2017, https://doi.org/10.1002/2017JA024193) and Mikhailov et al. (2017, https://doi.org/10.1002/2017JA023909) have recently examined thermospheric and ionospheric long-term trends using a data set of four thermospheric parameters (Tex, [O], [N2], and [O2]) and solar EUV flux. These data were derived from one single ionospheric parameter, foF1, using a nonlinear fitting procedure involving a photochemical model for the F1 peak. The F1 peak is assumed at the transition height ht with the linear recombination for atomic oxygen ions being equal to the quadratic recombination for molecular ions. This procedure has a number of obvious problems that are not addressed or not sufficiently justified. The potentially large ambiguities and biases in derived parameters make them unsuitable for precise quantitative ionospheric and thermospheric long-term trend studies. Furthermore, we assert that Perrone and Mikhailov (2017, https://doi.org/10.1002/2017JA024193) conclusions regarding incoherent scatter radar (ISR) ion temperature analysis for long-term trend studies are incorrect and in particular are based on a misunderstanding of the nature of the incoherent scatter radar measurement process. Large ISR data sets remain a consistent and statistically robust method for determining long term secular plasma temperature trends.

  6. Persistent U(IV) and U(VI) following in-situ recovery (ISR) mining of a sandstone uranium deposit, Wyoming, USA

    Science.gov (United States)

    Gallegos, Tanya J.; Campbell, Kate M.; Zielinski, Robert A.; Reimus, P.W.; J.T. Clay,; N. Janot,; J. J. Bargar,; Benzel, William M.

    2015-01-01

    Drill-core samples from a sandstone-hosted uranium (U) deposit in Wyoming were characterized to determine the abundance and distribution of uranium following in-situ recovery (ISR) mining with oxygen- and carbon dioxide-enriched water. Concentrations of uranium, collected from ten depth intervals, ranged from 5 to 1920 ppm. A composite sample contained 750 ppm uranium with an average oxidation state of 54% U(VI) and 46% U(IV). Scanning electron microscopy (SEM) indicated rare high uranium (∼1000 ppm U) in spatial association with P/Ca and Si/O attributed to relict uranium minerals, possibly coffinite, uraninite, and autunite, trapped within low permeability layers bypassed during ISR mining. Fission track analysis revealed lower but still elevated concentrations of U in the clay/silica matrix and organic matter (several 10 s ppm) and yet higher concentrations associated with Fe-rich/S-poor sites, likely iron oxides, on altered chlorite or euhedral pyrite surfaces (but not on framboidal pyrite). Organic C (mining, the likely sequestration of uranium within labile iron oxides following mining and sensitivity to changes in redox conditions requires careful attention during groundwater restoration.

  7. Constructed Wetlands

    Science.gov (United States)

    these systems can improve water quality, engineers and scientists construct systems that replicate the functions of natural wetlands. Constructed wetlands are treatment systems that use natural processes

  8. ISR Superconducting Quadrupoles

    CERN Multimedia

    1977-01-01

    Michel Bouvier is preparing for curing the 6-pole superconducting windings inbedded in the cylindrical wall separating liquid helium from vacuum in the quadrupole aperture. The heat for curing the epoxy glue was provided by a ramp of infrared lamps which can be seen above the slowly rotating cylinder. See also 7703512X, 7702690X.

  9. ISR Intersection 1

    CERN Multimedia

    CERN PhotoLab

    1974-01-01

    The experimental apparatus used at intersection 1 by the CERN-Bologna Collaboration (experiment R105). It consists of two almost identical magnetic spectrometers centered at 90 degrees on opposite sides of the intersection region. In each spectrometer one can see magnetostrictive wire spark chambers, a magnet, more chambers and various hodoscopes of scintillation counters. Gas Cerenkov counters (almost invisible in the picture) are located in the gap of each magnet. On the left hand side, a matrix of 119 lead glass Cerenkov counters is located behind some concrete and iron shielding.

  10. ISR vacuum system

    CERN Multimedia

    CERN PhotoLab

    1971-01-01

    Some of the most important components of the vacuum system are shown. At the left, the rectangular box is a sputter-ion pump inside its bake-out oven. The assembly in the centre includes a sector valve, three roughing valves, a turbomolecular pump, a rotary backing pump and auxiliary equipment. At the right, the small elbow houses a Bayard-

  11. ISR magnet power supplies

    CERN Multimedia

    CERN PhotoLab

    1970-01-01

    At the left, for the main magnets, the 18 kV switchgear is in the foreground and at the rear are cubicles with rectifiers and filters. At the right, rear, are rectifiers for pole face windings and auxiliary magnets.

  12. Construction management

    CERN Document Server

    Pellicer, Eugenio; Teixeira, José C; Moura, Helder P; Catalá, Joaquín

    2014-01-01

    The management of construction projects is a wide ranging and challenging discipline in an increasingly international industry, facing continual challenges and demands for improvements in safety, in quality and cost control, and in the avoidance of contractual disputes. Construction Management grew out of a Leonardo da Vinci project to develop a series of Common Learning Outcomes for European Managers in Construction. Financed by the European Union, the project aimed to develop a library of basic materials for developing construction management skills for use in a pan-European context. Focused exclusively on the management of the construction phase of a building project from the contractor's point of view, Construction Management covers the complete range of topics of which mastery is required by the construction management professional for the effective delivery of new construction projects. With the continued internationalisation of the construction industry, Construction Management will be required rea...

  13. 46 CFR 160.054-3 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Construction. 160.054-3 Section 160.054-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS... Construction. (a) Construction. The container shall be constructed of tough transparent material, not less than...

  14. Public Health Departments

    Data.gov (United States)

    Department of Homeland Security — State and Local Public Health Departments in the United States Governmental public health departments are responsible for creating and maintaining conditions that...

  15. JetStream Rotational and Aspiration Atherectomy in Treating In-Stent Restenosis of the Femoropopliteal Arteries: Results of the JETSTREAM-ISR Feasibility Study.

    Science.gov (United States)

    Shammas, Nicolas W; Shammas, Gail A; Banerjee, Subhash; Popma, Jeffrey J; Mohammad, Atif; Jerin, Michael

    2016-04-01

    To evaluate the outcomes and stent-device interaction of the JetStream atherectomy device in the treatment of in-stent restenosis (ISR) of the femoropopliteal segment. The JetStream XC atherectomy device, a rotational cutter with aspiration capacity, was evaluated in a prospective cohort of 29 patients (mean age 69.9 ± 11.7 years; 11 men) with femoropopliteal ISR in 32 limbs (ClinicalTrials.gov identifier NCT01722877). Lesion length was 17.4 ± 13.1 cm. The primary effectiveness outcome was acute success (≤ 30% residual narrowing with no serious adverse events). The primary safety endpoint was major adverse events. Secondary endpoints included clinically driven target lesion revascularization (TLR) at 6 months and 1 year and loss of stent integrity as assessed by an angiographic core laboratory. Treated length was 19.5 ± 12.9 cm. Acute success was obtained in 29/32 (91%) limbs. Acute device success (atherectomy alone) was 76% (22/29). Adjunctive balloon angioplasty was performed in all cases at a mean pressure of 11.6 ± 3.3 atm. Embolic filter protection was used in 16 (50%) of 32 limbs. Macrodebris was noted in 2 (12%) of 16 filters. Distal embolization requiring treatment occurred in 3/32 (9.4%) limbs (2 with no filter). Other non-procedure-related adverse events were 1 (3%) death (nonvascular) and 1 (3%) case of major bleeding. There were no new stent fractures or deformities (n=24) postatherectomy. Follow-up was completed on 27 patients (29 limbs) at 6 and 12 months. TLR at these time points occurred in 4/29 (14%) and 12/29 (41%) patients. Patency (duplex-derived peak systolic velocity ratio atherectomy using the XC device has favorable acute results in treating femoropopliteal ISR with high procedure success, no device-stent interaction, and favorably low TLR rates. A multicenter trial is needed to confirm these results. © The Author(s) 2016.

  16. Nuclear Power 2010 Program Dominion Virginia Power Cooperative Project U.S. Department of Energy Cooperative Agreement DE-FC07-05ID14635 Construction and Operating License Demonstration Project Final Report

    International Nuclear Information System (INIS)

    Grecheck, Eugene S.; Batalo, David P.

    2010-01-01

    This report serves to summarize the major activities completed as part of Virginia Electric and Power Company's North Anna construction and operating license demonstration project with DOE. Project successes, lessons learned, and suggestions for improvement are discussed. Objectives of the North Anna COL project included preparation and submittal of a COLA to the USNRC incorporating ESBWR technology for a third unit a the North Anna Power Station site, support for the NRC review process and mandatory hearing, obtaining NRC approval of the COLA and issuance of a COL, and development of a business case necessary to support a decision on building a new nuclear power plant at the North Anna site.

  17. US Department of Energy Secretary Bill Richardson (centre) at an LHC interaction region quadrupole test cryostat. part of the US contribution to LHC construction and built by the US-LHC collaboration (hence the Fermilab logo)

    CERN Multimedia

    Barbara Warmbein

    2000-01-01

    Photo 01 : September 2000 - Mr Bill Richardson, Secretary of Energy, United States of America (centre) at an LHC interaction region quadrupole test cryostat, part of the US contribution to LHC construction and built by the US-LHC collaboration (hence the Fermilab logo); with l. to r. Dr Mildred Dresselhaus, Dr Carlo Wyss, CERN Director General, Profesor Luciano Maiani, Professor Roger Cashmore, Ambassador George Moose, Dr Peter Rosen, Dr John Ellis. Photo 02 : Mr. Bill Richardson (right), Secretary of Energy United States of America with Prof. Luciano Maiani leaning over one of the LHC magnets produced at Fermilab during his visit to CERN on 16th September 2000.

  18. Observed differences in event structures of high-p/sub T/ π0 and single photon events produced in pp collisions at the CERN ISR

    International Nuclear Information System (INIS)

    Rahm, D.C.

    1980-01-01

    The direct photon production in pp collisions for c.m. energies 31 less than or equal to 63 GeV and transverse momenta of up to 9 GeV/c were measured at the ISR by use of a segmented lead/liquid argon calorimeter. The observed γ/π 0 ratio was found to be a significantly larger than zero at 4 GeV/c in p/sub T/, increasing to 0.4 at 9 GeV/c. The average multiplicity on the trigger side for the single-photon events was found to be significantly lower than for π 0 events. The correlations in Δy and Δphi between the trigger particle and an additional particle were found to differe mainly at small Δy and Δphi. 3 figures

  19. A measurement of inclusive π0 production at large psub(T) from p-p collisions at the CERN ISR

    International Nuclear Information System (INIS)

    Angelis, A.L.S.; Lyons, L.; Phinney, N.; Segar, A.M.; Wallace-Hadrill, J.; White, T.O.; Yelton, J.M.; Blumenfeld, B.J.; Hollebeek, R.J.; Lederman, L.M.; Levinthal, D.; Vidal, R.A.; Camilleri, L.; Papa, C. del; Di Lella, L.; Pope, B.G.; Pordes, S.H.; Singh-Sidhu, J.; Smith, A.M.; Chapin, T.J.; Cool, R.L.; Dimcovski, Z.; Linnemann, J.T.; Rothenberg, A.F.; Tannenbaum, M.J.

    1978-01-01

    The inclusive cross section for large psub(T) π 0 production near 90 0 in p-p collisions at the CERN ISR is presented for centre-of-mass energies 30.7, 53.1 and 62.4 GeV. The data are inconsistent with scaling of the form psup(-n)sub(T)F(xsub(T)), with constant n or with n allowed to depend on xsub(T)=2psub(T)/√s. For √s=53.1 and 62.4 GeV, the value of n found for 3.5< psub(T)<7.0 GeV/c is n=8.0+-0.5, in agreement with previous experiments. However, for 7.5< psub(T)<14.0 GeV/c the value becomes n=5.1+-0.4. (Auth.)

  20. Uranium ISR Mine Closure — General Concepts and Model-Based Simulation of Natural Attenuation for South-Australian Mine Sites

    Energy Technology Data Exchange (ETDEWEB)

    Jeuken, B.; Märten, H.; Woods, P., E-mail: horst.maerten@heathgate.com.au [Heathgate Resources Pty. Ltd. (Heathgate), Adelaide (Australia); Kalka, H.; Nicolai, J. [Umwelt- und Ingenieurtechnik GmbH Dresden (UIT), Dresden (Germany)

    2014-05-15

    Heathgate has demonstrated the effect of natural attenuation (NA) in post in-situ recovery (ISR) aquifer regions during the operation of the Beverley mine since 2001. Enhanced natural attenuation (ENA) has been considered as the key component of the mine closure concept for the new Beverley Four Mile (BFM) project, complemented by an extensive monitoring program. Data from batch and column tests for BFM core samples was used to calibrate a reactive transport model, whose application in conjunction with the hydrological modelling of the BFM aquifer has shown that NA will result in the restoration of the aquifer in time. ENA within a staged mine development program under the site-specific circumstances is discussed. (author)

  1. Electrochemical construction

    Science.gov (United States)

    Einstein, Harry; Grimes, Patrick G.

    1983-08-23

    An electrochemical cell construction features a novel co-extruded plastic electrode in an interleaved construction with a novel integral separator-spacer. Also featured is a leak and impact resistant construction for preventing the spill of corrosive materials in the event of rupture.

  2. Usability Constructs

    DEFF Research Database (Denmark)

    Hertzum, Morten; Clemmesen, Torkil; Hornbæk, Kasper Anders Søren

    2007-01-01

    Whereas research on usability predominantly employs universal definitions of the aspects that comprise usability, people experience their use of information systems through personal constructs. Based on 48 repertory-grid interviews, this study investigates how such personal constructs are affected...... use of constructs traditionally associated with usability (e.g., easy-to-use, intuitive, and liked). Further analysis of the data is ongoing...

  3. Combining high-speed SVM learning with CNN feature encoding for real-time target recognition in high-definition video for ISR missions

    Science.gov (United States)

    Kroll, Christine; von der Werth, Monika; Leuck, Holger; Stahl, Christoph; Schertler, Klaus

    2017-05-01

    For Intelligence, Surveillance, Reconnaissance (ISR) missions of manned and unmanned air systems typical electrooptical payloads provide high-definition video data which has to be exploited with respect to relevant ground targets in real-time by automatic/assisted target recognition software. Airbus Defence and Space is developing required technologies for real-time sensor exploitation since years and has combined the latest advances of Deep Convolutional Neural Networks (CNN) with a proprietary high-speed Support Vector Machine (SVM) learning method into a powerful object recognition system with impressive results on relevant high-definition video scenes compared to conventional target recognition approaches. This paper describes the principal requirements for real-time target recognition in high-definition video for ISR missions and the Airbus approach of combining an invariant feature extraction using pre-trained CNNs and the high-speed training and classification ability of a novel frequency-domain SVM training method. The frequency-domain approach allows for a highly optimized implementation for General Purpose Computation on a Graphics Processing Unit (GPGPU) and also an efficient training of large training samples. The selected CNN which is pre-trained only once on domain-extrinsic data reveals a highly invariant feature extraction. This allows for a significantly reduced adaptation and training of the target recognition method for new target classes and mission scenarios. A comprehensive training and test dataset was defined and prepared using relevant high-definition airborne video sequences. The assessment concept is explained and performance results are given using the established precision-recall diagrams, average precision and runtime figures on representative test data. A comparison to legacy target recognition approaches shows the impressive performance increase by the proposed CNN+SVM machine-learning approach and the capability of real-time high

  4. Nuclear Power 2010 Program Dominion Virginia Power Cooperative Project U.S. Department of Energy Cooperative Agreement DE-FC07-05ID14635 Construction and Operating License Demonstration Project Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Eugene S. Grecheck

    2010-11-30

    This report serves to summarize the major activities completed as part of Virginia Electric and Power Company's North Anna construction and operating license demonstration project with DOE. Project successes, lessons learned, and suggestions for improvement are discussed. Objectives of the North Anna COL project included preparation and submittal of a COLA to the USNRC incorporating ESBWR technology for a third unit a the North Anna Power Station site, support for the NRC review process and mandatory hearing, obtaining NRC approval of the COLA and issuance of a COL, and development of a business case necessary to support a decision on building a new nuclear power plant at the North Anna site.

  5. Construction mathematics

    CERN Document Server

    Virdi, Surinder; Virdi, Narinder Kaur

    2014-01-01

    Construction Mathematics is an introductory level mathematics text, written specifically for students of construction and related disciplines. Learn by tackling exercises based on real-life construction maths. Examples include: costing calculations, labour costs, cost of materials and setting out of building components. Suitable for beginners and easy to follow throughout. Learn the essential basic theory along with the practical necessities. The second edition of this popular textbook is fully updated to match new curricula, and expanded to include even more learning exercises. End of chapter exercises cover a range of theoretical as well as practical problems commonly found in construction practice, and three detailed assignments based on practical tasks give students the opportunity to apply all the knowledge they have gained. Construction Mathematics addresses all the mathematical requirements of Level 2 construction NVQs from City & Guilds/CITB and Edexcel courses, including the BTEC First Diploma in...

  6. FFTF constructibility

    International Nuclear Information System (INIS)

    Weber, S.A.; Hulbert, D.I.

    1975-01-01

    The influence of the design criteria on the constructibility of the Fast Flux Test Facility is described. Specifically, the effects of requirements due to maintenance accessibility, inerting of cells, seismicity, codes, and standards are addressed. The design and construction techniques developed to minimize the impact of the design criteria on cost and schedule are presented with particular emphasis on the cleanliness and humidity controls imposed during construction of the sodium systems. (U.S.)

  7. One half of a prototype titanium vacuum chamber

    CERN Multimedia

    CERN PhotoLab

    1973-01-01

    Designed and constructed in the ISR Department, it could be for general use at intersection regions. The use of titanium instead of stainless steel increases the "transparency" to particles by a factor of about two for the same wall thickness.

  8. Randomized controlled study of excimer laser atherectomy for treatment of femoropopliteal in-stent restenosis: initial results from the EXCITE ISR trial (EXCImer Laser Randomized Controlled Study for Treatment of FemoropopliTEal In-Stent Restenosis).

    Science.gov (United States)

    Dippel, Eric J; Makam, Prakash; Kovach, Richard; George, Jon C; Patlola, Raghotham; Metzger, D Christopher; Mena-Hurtado, Carlos; Beasley, Robert; Soukas, Peter; Colon-Hernandez, Pedro J; Stark, Matthew A; Walker, Craig

    2015-01-01

    The purpose of this study was to evaluate the safety and efficacy of excimer laser atherectomy (ELA) with adjunctive percutaneous transluminal angioplasty (PTA) versus PTA alone for treating patients with chronic peripheral artery disease with femoropopliteal bare nitinol in-stent restenosis (ISR). Femoropopliteal stenting has shown superiority to PTA for lifestyle-limiting claudication and critical limb ischemia, although treating post-stenting artery reobstruction, or ISR, remains challenging. The multicenter, prospective, randomized, controlled EXCITE ISR (EXCImer Laser Randomized Controlled Study for Treatment of FemoropopliTEal In-Stent Restenosis) trial was conducted across 40 U.S. centers. Patients with Rutherford Class 1 to 4 and lesions of target lesion length ≥4 cm, vessel diameter 5 to 7 mm were enrolled and randomly divided into ELA + PTA and PTA groups by a 2:1 ratio. The primary efficacy endpoint was target lesion revascularization (TLR) at 6-month follow up. The primary safety endpoint was major adverse event (death, amputation, or TLR) at 30 days post-procedure. Study enrollment was stopped at 250 patients due to early efficacy demonstrated at a prospectively-specified interim analysis. A total of 169 ELA + PTA subjects (62.7% male; mean age 68.5 ± 9.8 years) and 81 PTA patients (61.7% male; mean age 67.8 ± 10.3 years) were enrolled. Mean lesion length was 19.6 ± 12.0 cm versus 19.3 ± 11.9 cm, and 30.5% versus 36.8% of patients exhibited total occlusion. ELA + PTA subjects demonstrated superior procedural success (93.5% vs. 82.7%; p = 0.01) with significantly fewer procedural complications. ELA + PTA and PTA subject 6-month freedom from TLR was 73.5% versus 51.8% (p < 0.005), and 30-day major adverse event rates were 5.8% versus 20.5% (p < 0.001), respectively. ELA + PTA was associated with a 52% reduction in TLR (hazard ratio: 0.48; 95% confidence interval: 0.31 to 0.74). The EXCITE ISR trial is the first large, prospective, randomized study

  9. 基于KPI在医院行政后勤部门的绩效考核管理体系构建%The Construction of Performance Appraisal Management System in the Hospital based on the KPI Administrative Departments

    Institute of Scientific and Technical Information of China (English)

    范艺馨; 续小霞; 张茹雪; 白靖平

    2015-01-01

    Performance appraisal has become a hot issue. How to carry out the performance appraisal,improve the work efficiency, promote the innovation in health service management,standard administrative behavior in the health functions of the administrative organs and institutions has become a major problem in the development of the hospital. A 3 armour hospital in xinjiang sets up logistics department performance appraisal to the administration management system from the BSC′s financial,customer,internal business and learning growth four aspects based on the KPI,so as to provide reference for other hospitals performance reform.%绩效考核已经成为热点问题。如何在卫生行政机关及事业单位职能部门开展绩效考核,提高工作效率,推进卫生事业管理创新,规范行政行为,已经成为医院发展中的重大难题。新疆某三甲医院主要从BSC的财务、客户、内部运营和学习成长4个方面出发,基于KPI建立针对行政后勤部门绩效考核管理体系,以期为其他医院绩效改革提供参考。

  10. Historical events of the Chemical Processing Department

    Energy Technology Data Exchange (ETDEWEB)

    Lane, W.A.

    1965-11-12

    The purpose of this report is to summarize and document the significant historical events pertinent to the operation of the Chemical Processing facilities at Hanford. The report covers, in chronological order, the major construction activities and historical events from 1944 to September, 1965. Also included are the production records achieved and a history of the department`s unit cost performance.

  11. 49 CFR 1101.3 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 8 2010-10-01 2010-10-01 false Construction. 1101.3 Section 1101.3 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION RULES OF PRACTICE DEFINITIONS AND CONSTRUCTION § 1101.3 Construction. The rules of construction...

  12. 46 CFR 72.20-15 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Construction. 72.20-15 Section 72.20-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS CONSTRUCTION AND ARRANGEMENT Accommodations for Officers and Crew § 72.20-15 Construction. All crew spaces are to be constructed and arranged...

  13. Construction Management.

    Science.gov (United States)

    Abbott, James F.

    This article provides a detailed discussion of a team approach to building that involves a construction manager, an architect, and a contractor. Bidding methods are outlined; the major components in construction management -- value engineering and fast track scheduling -- and the use of performance specifications are discussed. The construction…

  14. Construction fraud

    NARCIS (Netherlands)

    Graafland, J.J.; Liedekerke, L.; Dubbink, W.; van Liedekerke, L.; van Luijk, H.

    2011-01-01

    Due to the actions of a whistleblower The Netherlands was confronted with a massive case of construction fraud involving almost the entire construction sector. Price fixing, prior consulting, duplicate accounts, fictitious invoices and active corruption of civil servants were rampant practices. This

  15. Superstring construction

    CERN Document Server

    1989-01-01

    The book includes a selection of papers on the construction of superstring theories, mainly written during the years 1984-1987. It covers ten-dimensional supersymmetric and non-supersymmetric strings, four-dimensional heterotic strings and four-dimensional type-II strings. An introduction to more recent developments in conformal field theory in relation to string construction is provided.

  16. Worldwide construction

    International Nuclear Information System (INIS)

    Williamson, M.

    1994-01-01

    The paper lists major construction projects in worldwide processing and pipelining, showing capacities, contractors, estimated costs, and time of construction. The lists are divided into refineries, petrochemical plants, sulfur recovery units, gas processing plants, pipelines, and related fuel facilities. This last classification includes cogeneration plants, coal liquefaction and gasification plants, biomass power plants, geothermal power plants, integrated coal gasification combined-cycle power plants, and a coal briquetting plant

  17. Construction history and construction management

    International Nuclear Information System (INIS)

    Agh, S.

    1999-01-01

    The process of pre-design and design preparation of the Mochovce NPP as well as the construction history of the plant is highlighted, including the financing aspect and problems arising from changes in the technological and other conditions of start-up of the reactor units. The results of international audits performed to improve the level of nuclear safety and implementation of the measures suggested are also described. The milestones of the whole construction process and start-up process, the control and quality system, and the methods of control and management of the complex construction project are outlined. (author)

  18. 32 CFR 751.4 - Construction.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Construction. 751.4 Section 751.4 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY CLAIMS PERSONNEL CLAIMS REGULATIONS Claims Against the United States § 751.4 Construction. The provisions of this section and the Personnel...

  19. Construction safety

    CERN Document Server

    Li, Rita Yi Man

    2013-01-01

    A close-to-ideal blend of suburb and city, speedy construction of towers of Babylon, the sparkling proportion of glass and steel buildings’ facade at night showcase the wisdom of humans. They also witness the footsteps, sweats and tears of architects and engineers. Unfortunately, these signatures of human civilizations are swathed in towering figures of construction accidents. Fretting about these on sites, different countries adopt different measures on sites. This book firstly sketches the construction accidents on sites, followed by a review on safety measures in some of the developing countries such as Bermuda, Egypt, Kuwait and China; as well as developed countries, for example, the United States, France and Singapore. It also highlights the enormous compensation costs with the courts’ experiences in the United Kingdom and Hong Kong.

  20. Constructing sanctions

    DEFF Research Database (Denmark)

    Jaeger, Mark Daniel

    2016-01-01

    such an effect. This paper explores sanctions conflicts as social constructs. It purports that rally-around-the-flag is all but one part of the discursive dimension of sanctions conflicts. Sanctions are intricately connected with the conflict setting they occur in. The study suggests a dialectical relation...... between how opponents perceive conflicts and the meaning of sanctions therein. This nexus of different constructions of sanctions moreover extends to “targeted” sanctions as well: As restrictive measures against Zimbabwe demonstrate, they are not the kind of minimally-invasive operations with clinical...

  1. Mission Assurance: An Operating Construct for the Department of Defense

    Science.gov (United States)

    2012-02-14

    Illinois Institute of Technology in 1987 with a Bachelor of Business Administration degree with a major in Marketing and a minor in Naval Science, and The...Retrieved from EBSCOhost . 7 Prizzia, R and Helfand, G (2001) Emergency preparedness and disaster management in Hawaii. Disaster Prevention and

  2. Construction work

    CERN Multimedia

    2004-01-01

    Construction work on building 179 will start on the 16th February 2004 and continue until November 2004. The road between buildings 179 and 158 will temporarily become a one way street from Route Democrite towards building 7. The parking places between buildings 179 and 7 will become obsolete. The ISOLDE collaboration would like to apologize for any inconveniences.

  3. The EN Department has a new leader

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    Roberto Saban takes over as new Engineering Department leader on 1 July 2010, at a time when the LHC is entering a stable operation phase. Roberto Saban presents his plans and vision.   Roberto Saban, new leader of the EN Department. The CERN Engineering (EN) Department's main areas of activity are technical coordination, the design and operation with beam of accelerator components and experimental facilities, the associated infrastructure systems, such as electrical distribution, cooling, ventilation and transport, and finally the design and construction of mechanical elements for the facilities. “I do not plan to change the internal structure of the Department because it works well but, with the LHC entering a phase of stable functioning, the Department will shift its focus to operation and maintenance. In this new situation, our role is not limited to supporting LHC operation but, on the contrary, we fully take part in it thanks to the synergy with the BE and TE Departments inside th...

  4. Department of Radiation Detectors: Overview

    International Nuclear Information System (INIS)

    Piekoszewski, J.

    1998-01-01

    (full text) Work carried out in 1997 in the Department of Radiation Detectors concentrated on three subjects: (i) Semiconductor Detectors (ii) X-ray Tube Generators (iii) Material Modification using Ion and Plasma Beams. Semiconductor detectors: Semiconductor detectors of ionizing radiation are among the basic tools utilized in such fields of research and industry as nuclear physics, high energy physics, medical (oncology) radiotherapy, radiological protection, environmental monitoring, energy dispersive X-ray fluorescence non-destructive analysis of chemical composition, nuclear power industry. The Department all objectives are: - search for new types of detectors, - adapting modern technologies (especially of industrial microelectronics) to detector manufacturing, - producing unique detectors tailored for physics experiments, - manufacturing standard detectors for radiation measuring instruments, - scientific development of the staff. These 1997 objectives were accomplished particularly by: - research on unique detectors for nuclear physics (e.g. transmission type Si(Li) detectors with extremely thin entrance and exit window), - development of technology of high-resistivity (HRSi) silicon detectors and thermoelectric cooling systems (KBN grant), - study of the applicability of industrial planar technology in producing detectors, - manufacturing detectors developed in previous years, re-generating and servicing customer detectors of various origin. In accomplishing of the above, the Department cooperated with interested groups of physicists from our Institute (P-I and P-II Departments), Warsaw University, Warsaw Heavy Ion Laboratory and with some technology Institutes based in Warsaw (ITME, ITE). Some detectors and services have been delivered to customers on a commercial basis. X-Rat tube generators: The Department conducts research on design and technology of producing X-ray generators based on X-ray tubes of special construction. In 1997, work on a special

  5. 46 CFR 190.07-10 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Construction. 190.07-10 Section 190.07-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS CONSTRUCTION AND ARRANGEMENT Structural Fire Protection § 190.07-10 Construction. (a) The hull, superstructure, structural...

  6. 46 CFR 92.20-15 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Construction. 92.20-15 Section 92.20-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS CONSTRUCTION AND ARRANGEMENT Accommodations for Officers and Crew § 92.20-15 Construction. All crew spaces are to be...

  7. 46 CFR 168.15-10 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Construction. 168.15-10 Section 168.15-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS CIVILIAN NAUTICAL SCHOOL VESSELS Accommodations § 168.15-10 Construction. (a) The accommodations provided must be securely constructed, properly...

  8. 46 CFR 160.002-4 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Construction. 160.002-4 Section 160.002-4 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS... and 5 § 160.002-4 Construction. (a) General. This specification covers life preservers which...

  9. 42 CFR 136.110 - Facilities construction.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Facilities construction. 136.110 Section 136.110..., DEPARTMENT OF HEALTH AND HUMAN SERVICES INDIAN HEALTH Grants for Development, Construction, and Operation of Facilities and Services § 136.110 Facilities construction. In addition to other requirements of this subpart...

  10. 46 CFR 190.20-15 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Construction. 190.20-15 Section 190.20-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS CONSTRUCTION AND ARRANGEMENT Accomodations for Officers, Crew, and Scientific Personnel § 190.20-15 Construction. All crew...

  11. 21 CFR 211.65 - Equipment construction.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Equipment construction. 211.65 Section 211.65 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS... construction. (a) Equipment shall be constructed so that surfaces that contact components, in-process materials...

  12. 46 CFR 161.012-7 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Construction. 161.012-7 Section 161.012-7 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL ELECTRICAL EQUIPMENT Personal Flotation Device Lights § 161.012-7 Construction. (a...

  13. 46 CFR 160.174-9 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Construction. 160.174-9 Section 160.174-9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Thermal Protective Aids § 160.174-9 Construction. (a) General...

  14. 46 CFR 92.07-10 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Construction. 92.07-10 Section 92.07-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS CONSTRUCTION AND ARRANGEMENT Structural Fire Protection § 92.07-10 Construction. (a) The hull, superstructure, structural...

  15. 46 CFR 160.005-4 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Construction. 160.005-4 Section 160.005-4 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS...), Models 52 and 56 § 160.005-4 Construction. (a) General. This specification covers life preservers which...

  16. 46 CFR 160.171-9 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Construction. 160.171-9 Section 160.171-9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Immersion Suits § 160.171-9 Construction. (a) General. Each...

  17. 46 CFR 160.042-3 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Construction. 160.042-3 Section 160.042-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Skids, Liferaft, for Merchant Vessels § 160.042-3 Construction...

  18. 46 CFR 108.235 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Construction. 108.235 Section 108.235 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Construction and Arrangement Helicopter Facilities § 108.235 Construction. (a) Each helicopter deck must be...

  19. 46 CFR 160.056-2 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Construction. 160.056-2 Section 160.056-2 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Rescue Boat § 160.056-2 Construction. (a) General. Rescue boats...

  20. 46 CFR 160.017-13 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Construction. 160.017-13 Section 160.017-13 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-13 Construction. (a) General. Each chain...

  1. 46 CFR 160.047-4 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Construction. 160.047-4 Section 160.047-4 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS... and Child § 160.047-4 Construction. (a) General. This specification covers buoyant vests which...

  2. 46 CFR 160.176-9 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Construction. 160.176-9 Section 160.176-9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Inflatable Lifejackets § 160.176-9 Construction. (a) General...

  3. Modelling Constructs

    DEFF Research Database (Denmark)

    Kindler, Ekkart

    2009-01-01

    , these notations have been extended in order to increase expressiveness and to be more competitive. This resulted in an increasing number of notations and formalisms for modelling business processes and in an increase of the different modelling constructs provided by modelling notations, which makes it difficult......There are many different notations and formalisms for modelling business processes and workflows. These notations and formalisms have been introduced with different purposes and objectives. Later, influenced by other notations, comparisons with other tools, or by standardization efforts...... to compare modelling notations and to make transformations between them. One of the reasons is that, in each notation, the new concepts are introduced in a different way by extending the already existing constructs. In this chapter, we go the opposite direction: We show that it is possible to add most...

  4. Department of Radiation Detectors: Overview

    International Nuclear Information System (INIS)

    Piekoszewski, J.

    1999-01-01

    Full text: Work carried out in 1998 in the Department of Radiation Detectors concentrated on three subjects: (i) Semiconductor Detectors (ii) X-ray Tube Generators (iii) Material Modification Using Ion and Plasma Beams. SEMICONDUCTOR DETECTORS: Semiconductor detectors of ionizing radiation are among the basic tools utilized in such fields of research and industry as nuclear physics, high energy physics, medical (oncology) radiotherapy, radiological protection, environmental monitoring, energy dispersive X-ray fluorescence non-destructive analysis of chemical composition, nuclear power industry. The departmental objectives are: a search for new types of detectors; producing unique detectors tailored for physics experiments; manufacturing standard detectors for radiation measuring instruments; scientific development of the staff. These objectives were accomplished in 1998 particularly by: research on unique thin silicon detectors for identification of particles in E-ΔE telescopes, modernization of technology of manufacturing Ge(Li) detectors capable of detecting broader range of gamma energies, manufacturing detectors developed in previous years, re-generating and servicing customer detectors of various origin. In accomplishment of the above the Department co-operated with groups of physicists from IPJ, PAN Institute of Physics (Warsaw), and with some technology Institutes based in Warsaw (ITME, ITE). Some detectors and services have been delivered to customers on a commercial basis. X-Ray TUBE GENERATORS: The Department conducts research on design and technology of manufacturing X-ray generators as well as on imaging and dosimetry of X-ray beams. Various models of special construction X-ray tubes and their power supplies are under construction. In 1998 work concentrated on: completing laboratory equipment for manufacturing X-ray tubes and their components, developing technology of manufacturing X-ray tubes and their components, completing a laboratory set-up with

  5. Fire Department Emergency Response

    International Nuclear Information System (INIS)

    Blanchard, A.; Bell, K.; Kelly, J.; Hudson, J.

    1997-09-01

    In 1995 the SRS Fire Department published the initial Operations Basis Document (OBD). This document was one of the first of its kind in the DOE complex and was widely distributed and reviewed. This plan described a multi-mission Fire Department which provided fire, emergency medical, hazardous material spill, and technical rescue services

  6. Constructing Catalonia

    Directory of Open Access Journals (Sweden)

    Bill Philips

    2009-07-01

    Full Text Available Catalonia, in common with other nations, has long been concerned with the question of identity and difference. Its problematic relationship with Spain has led to an emphasis on differentiating itself from its larger neighbour (if we are to accept, as most Spaniards do not, that Catalonia is not Spain, a situation complicated by the loss of the Spanish colonies of Cuba and The Philippines in 1898, and the Spanish Civil War and subsequent dictatorship from 1936 to 1976. Beginning in the late nineteenth century, the construction of a Catalan identity followed a similar route to that taken by other European nations such as England, Ireland and, indeed, Spain, including an emphasis on rural values, activities and the countryside, and the conversion of specifically local traditions into national past times. It is only in the last ten years or so that this model of Catalan identity has been recognised for what it is – a model constructed and encouraged for and by specific nationalist political interests. Ironically, Catalonia’s identity abroad has also been constructed and manipulated for political purposes, but from quite a different perspective. Orwell’s /Homage to Catalonia/ (1938 narrates an extremely blinkered version of the Spanish Civil War which has achieved iconic status as a result of cold war politics. Subsequent portrayals of the Spanish Civil War – Valentine Cunningham’s /The Penguin Book of Spanish Civil War Verse/ (ed., Penguin, 1980, or Ken Loach’s 1995 film /Land and Freedom/ base their arguments unquestioningly on /Homage to Catalonia/, perpetuating a view of the nation’s recent history that is both reductive and inaccurate

  7. Layout Construction

    DEFF Research Database (Denmark)

    Frandsen, Gudmund Skovbjerg; Palsberg, Jens; Schmidt, Erik Meineche

    We design a system for generating newspaper layout proposals. The input to the system consists of editorial information (text, pictures, etc) and style information (non-editorial information that specifies the aesthetic appearance of a layout). We consider the automation of layout construction...... to pose two main problems. One problem consists in optimizing the layout with respect to the constraints and preferences specified in the style information. Another problem consists in finding a representation of the style information that both supports its use in the combinatorial optimization...

  8. Department of Transportation

    Science.gov (United States)

    ... of Drone Integration Pilot Program MEET THE SECRETARY TRANSPORTATION TUESDAY FEATURED NEWS The Briefing Room Connect With ... Carriers - Get a DOT Number Find Your State Transportation Department 5 Star Automobile Crash Test Ratings Office ...

  9. Department of Business Administrati

    African Journals Online (AJOL)

    USER

    2015-08-20

    Aug 20, 2015 ... Department of Business Administration, Olabisi Onabanjo University, Ago-Iwoye, ... strategy and product performance with a special focus on the food and beverage industry in ... for the actions that the leaders will create in.

  10. Department of Education (DOE)

    Data.gov (United States)

    Social Security Administration — The purpose of this agreement is to assist the U.S. Department of Education in its obligation to ensure that applicants for student financial assistance under Title...

  11. Department of reactor technology

    International Nuclear Information System (INIS)

    1982-04-01

    The general development of the Department of Reacctor Technology at Risoe during 1981 is presented, ant the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included. (author)

  12. Administering an Academic Department.

    Science.gov (United States)

    Hicks, Donald W.; Sperry, John B.

    1986-01-01

    Clarifies the possible forms of leadership taken by the administrator of an academic department. Discusses such elements as authoritarian leadership, faculty consensus, power and responsibility, input factors, types of decision making, faculty recruiting, and authoritarian versus democratic approach. (CT)

  13. Department of energy technology

    International Nuclear Information System (INIS)

    1983-04-01

    The general development of the Department of Energy Technology at Risoe during 1982 is presented, and the activities within the major subject fields are described in some detail. List of staff, publications and computer programs are included. (author)

  14. Department of Reactor Technology

    DEFF Research Database (Denmark)

    Risø National Laboratory, Roskilde

    The general development of the Department of Reactor Technology at Risø during 1981 is presented, and the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included.......The general development of the Department of Reactor Technology at Risø during 1981 is presented, and the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included....

  15. Department of Leptonic Interactions - Overview

    International Nuclear Information System (INIS)

    Rybicki, K.

    1999-01-01

    Full text: 1998 was the first full calendar year of the formal existence of our Department which evolved from the Laboratory of Electronic Particle Detectors (originally called Laboratory of Filmless Detectors) founded in 1972. The department is involved in two running experiments (DELPHI at CERN and H1 at DESY) and in one experiment (BELLE at KEK) which will start data taking in 1999. In addition, three department members work for the ATLAS collaboration at CERN. Since the DELPHI experiment will soon be terminated, we are considering future enterprises. One possibility is the TESLA project at DESY (our technicians have been working for several years on the construction and testing of superconducting cavities for the project). Another possibility is the LHC-b experiment at CERN. The main results of work done in 1998 are covered in reports on research. Here we mention only a few highlights. In the DELPHI experiment the cross section for the process e + e - → W + W - has been measured for several energies. Data registered so far allowed determination of the W mass with the accuracy comparable to the Tevatron results. An important role in these measurements has been played by the sophisticated silicon detector to which the Cracow group brought a substantial contribution. The analysis of more H1 data has weakened the indication for an excess of very high Q 2 events reported in 1997. Thus the paper on isolated leptons with very high transverse momenta was formulated even more carefully. In these and in several other studies the topological second level trigger designed, installed and improved by the Cracow-Orsay collaboration was very important. In the BELLE experiment the HALNY system has been designed and installed by our people. The system allows fast readout and filtering of signals from the Silicon Vertex Detector which is crucial for the experiment. One should also mention high-quality carbon-carbon composites produced in collaboration with the High Energy

  16. Department of Leptonic Interactions - Overview

    International Nuclear Information System (INIS)

    Rybicki, K.

    2000-01-01

    Full text: Our Department evolved from the Laboratory of Electronic Particle Detectors (originally called the Laboratory of Filmless Detectors) founded in 1972. The department is involved in three running experiments (DELPHI at CERN, H1 at DESY and BELLE at KEK). In 1999, we joined the LHC-b experiment at CERN. In addition, three department members work part-time for the ATLAS collaboration at CERN and our technicians have been working for several years on the construction and testing of superconducting cavities for the TESLA project. This arrangement provides a neat equilibrium between data producing experiments (2000 is the last year of the DELPHI running) and future projects. The main results of work done in 1999 are covered in reports on research. Here we mention only a few highlights. The first runs of the BELLE experiment have shown that the apparatus and the software can cope with the luminosity of 6 x 10 31 cm -2 s -1 presently available at KEK-B. The DELPHI experiment measured the parameters of the W boson with an accuracy comparable to that of the Tevatron. This allowed still more precise tests of the Standard Model. Some of them, like the determination of the cross sections for the production of Z 0 Z 0 and q(anti)q pairs, were actually done in Cracow. A novel study of p-p and Λ-Λ correlations performed in Cracow showed that the size of the particle emitting region decreases with particle mass. The H1 experiment published the first results on open beauty production at HERA. The cross section seems to be higher than the predictions of Quantum Chromodynamics in the Next-to-Leading Order. The work on a prototype detector for the LHC-b has just started in Cracow. One should also mention high-quality carbon-carbon composites designed and produced in collaboration with the High Energy Physics Detector Construction Group. For the first time, there were as many as 47 papers (fulfilling the highest KBN standard) published in a single year, the members of our

  17. INFINITY construction contract signed

    Science.gov (United States)

    2010-01-01

    Key state and community leaders celebrated April 6 with the signing of a construction contract for the state-of-the-art INFINITY Science Center planned near John C. Stennis Space Center in south Mississippi. Gulfport Mayor George Schloegel (l to r), chair of non-profit INFINITY Science Center Inc., was joined for the signing ceremony at the Hancock Bank in Gulfport by Virginia Wagner, sister of late Hancock Bank President Leo Seal Jr.; and Roy Anderson III, president and CEO of Roy Anderson Corp. Seal was the first chair of INFINITY Science Center Inc., which has led in development of the project. Roy Anderson Corp. plans to begin construction on the 72,000-square-foot, $28 million science and education center in May. The Mississippi Department of Transportation (MDOT) also is set to begin construction of a $2 million access road to the new center. The April 6 ceremony was attended by numerous officials, including former Stennis Space Center Directors Jerry Hlass and Roy Estess; Mississippi Senate President Pro Tempore Billy Hewes, R-Gulfport; Mississippi Rep. Diane Peranich, D-Pass Christian; and MDOT Southern District Commissioner Wayne Brown.

  18. INDOT Construction Inspection Priorities : Technical Summary

    Science.gov (United States)

    2012-05-01

    In the last decade, the Indiana Department of Transportation (INDOT) increased the number of construction projects funded by capital made available through the leasing of the Indiana Toll Road. However, during the same time period, the level of perso...

  19. Progress on Radioactive Waste Treatment Facilities Construction

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    In 2011, five projects were undertaken by radioactive waste projects management department, which are "Cold Commissioning of the Pilot Project on Radioactive Waste Retrieval and Conditioning (abbreviation 'Pilot Project')", "Radioactive Ventilation Project Construction (abbreviation 'Ventilation

  20. perceptions of undergraduate construction students on industrial

    African Journals Online (AJOL)

    User

    Keywords: Industrial training, perception, construction graduates, Ghana. INTRODUCTION .... higher educational institutions to continue to strengthen its links ... the profile of the respondents; ... the teaching departments in the placement of.

  1. Construction engineering inspection direct cost survey.

    Science.gov (United States)

    2014-07-01

    The objective of the study was to provide a rationale to Georgia Department of Transportation : (GDOT) for Direct Costs in terms of salary and wages charged by qualified independent : contractors performing Construction Engineering Inspection (CEI) s...

  2. Salt marsh construction costs and shrimp production

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Continuing wetland loss in Galveston Bay, Texas (USA) has led to the development of various salt marsh restoration projects. These constructed wetlands often attempt...

  3. Department of Defense perspective

    International Nuclear Information System (INIS)

    Devine, R.

    1985-01-01

    This paper examines radiation instrumentation from the Department of Defense perspective. Radiation survey instruments and calibration, or RADIAC, as it is called in the services, while administratively falling under the Assistant Secretary of Defense for Atomic Energy, has generally been managed at a lower level. The Naval Electronics Systems Command and Army Signal Corp are the two principles in the Department of Defense for RADIAC. The actions of the services are coordinated through the tri-service RADIAC working group, which meets about every year and a half. Several points from this organization are highlighted

  4. Agricultural research department

    International Nuclear Information System (INIS)

    1989-01-01

    The annual report gives a general review of the research work of the department. The acitivities of the year are described in 4 short project reports each followed by a list of publications, posters and lectures. Further, the report gives two review articles on selected subjects related to the work: ''Pea mutants'' and ''Linkage maps''. Included in the report are also a list of the staff members, guest scientists and students, lectures given at the department, and a list of travel- and other activities. (author)

  5. Department of Radiation Detectors - Overview

    International Nuclear Information System (INIS)

    Piekoszewski, J.

    1997-01-01

    Work carried out in 1996 in the Department of Radiation Detectors concentrated on three subjects: (i) Semiconductor Detectors (ii) X-ray Tube Generators (iii) Material Modification Using Ion and Plasma Beams. The Departamental objectives are: a search for new types of detectors, adapting modern technologies (especially of industrial microelectronics) to detector manufacturing, producing unique detectors tailored for physics experiments, manufacturing standard detectors for radiation measuring instruments. These objectives were accomplished in 1996 by: research on unique detectors for nuclear physics (e.g. a spherical set of particle detectors silicon ball), detectors for particle identification), development of technology of high-resistivity silicon detectors HRSi (grant proposal), development of thermoelectric cooling systems (grant proposal), research on p-i-n photodiode-based personal dosimeters, study of applicability of industrial planar technology in producing detectors, manufacturing detectors developed in previous years, re-generating and servicing customer detectors of various origin. The Department conducts research on the design and technology involved in producing X-ray generators based on X-ray tubes of special construction. Various tube models and their power supplies were developed. Some work has also been devoted to the detection and dosimetry of X-rays. X-ray tube generators are applied to non-destructive testing and are components of analytical systems such as: X-ray fluorescence chemical composition analysis, gauges of layer thickness and composition stress measurements, on-line control of processes, others where an X-ray tube may replace a radio-isotope source. In 1996, the Department: reviewed the domestic demand for X-ray generators, developed an X-ray generator for diagnosis of ostheroporosis of human limbs, prepared a grant proposal for the development of a new instrument for radiotherapy, the so-called needle-like X-ray tube. (author)

  6. Department of Radiation Detectors - Overview

    Energy Technology Data Exchange (ETDEWEB)

    Piekoszewski, J. [Soltan Inst. for Nuclear Studies, Otwock-Swierk (Poland)

    1997-12-31

    Work carried out in 1996 in the Department of Radiation Detectors concentrated on three subjects: (i) Semiconductor Detectors (ii) X-ray Tube Generators (iii) Material Modification Using Ion and Plasma Beams. The Departamental objectives are: a search for new types of detectors, adapting modern technologies (especially of industrial microelectronics) to detector manufacturing, producing unique detectors tailored for physics experiments, manufacturing standard detectors for radiation measuring instruments. These objectives were accomplished in 1996 by: research on unique detectors for nuclear physics (e.g. a spherical set of particle detectors silicon ball), detectors for particle identification), development of technology of high-resistivity silicon detectors HRSi (grant proposal), development of thermoelectric cooling systems (grant proposal), research on p-i-n photodiode-based personal dosimeters, study of applicability of industrial planar technology in producing detectors, manufacturing detectors developed in previous years, re-generating and servicing customer detectors of various origin. The Department conducts research on the design and technology involved in producing X-ray generators based on X-ray tubes of special construction. Various tube models and their power supplies were developed. Some work has also been devoted to the detection and dosimetry of X-rays. X-ray tube generators are applied to non-destructive testing and are components of analytical systems such as: X-ray fluorescence chemical composition analysis, gauges of layer thickness and composition stress measurements, on-line control of processes, others where an X-ray tube may replace a radio-isotope source. In 1996, the Department: reviewed the domestic demand for X-ray generators, developed an X-ray generator for diagnosis of ostheroporosis of human limbs, prepared a grant proposal for the development of a new instrument for radiotherapy, the so-called needle-like X-ray tube. (author).

  7. CERN Intersecting Storage Rings (ISR)

    CERN Document Server

    Johnsen, Kjell

    1973-01-01

    It has been realized for many years that it would be possible to obtain a glimpse into a much higher energy region for elementary-particle research if particle beams could be persuaded to collide head-on.

  8. At ISR Main Control Room

    CERN Multimedia

    1983-01-01

    After 13 years the exploitation of the Intersecting Storage Rings as a beam-beam collider went to an end. In this last year the demands were very exacting, both in terms of operating time and diversified running conditions (Annual Report 1983 p. 123). Before dismantelement the photographer made a last tour, see photos 8310889X --> 8310667X. This photo shows the Main Control Room.

  9. ISR split-field magnet

    CERN Multimedia

    CERN PhotoLab

    1975-01-01

    The experimental apparatus used at intersection 4 around the Split-Field Magnet by the CERN-Bologna Collaboration (experiment R406). The plastic scintillator telescopes are used for precise pulse-height and time-of-flight measurements.

  10. Strengthening Science Departments

    Science.gov (United States)

    Campbell, Todd; Melville, Wayne; Bartley, Anthony

    2012-01-01

    Teachers do not work in a vacuum. They are, in most cases, part of a science department in which teachers and the chairperson have important roles in science education reform. Current reform is shaped by national standards documents that emphasize the pedagogical and conceptual importance of best practices framed by constructivism and focused on…

  11. Department of reactor technology

    International Nuclear Information System (INIS)

    1980-01-01

    The activities of the Department of Reactor Technology at Risoe during 1979 are described. The work is presented in five chapters: Reactor Engineering, Reactor Physics and Dynamics, Heat Transfer and Hydraulics, The DR 1 Reactor, and Non-Nuclear Activities. A list of the staff and of publications is included. (author)

  12. Mining Department computer systems

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-01

    Describes the main computer systems currently available, or being developed by the Mining Department of the UK National Coal Board. They are primarily for the use of mining and specialist engineers, but some of them have wider applications, particularly in the research and development and management statistics fields.

  13. Metallurgy Department publications 1988

    International Nuclear Information System (INIS)

    Schroeder Pedersen, A.; Bilde-Soerensen, J.B.

    1989-08-01

    A presentation (including abstracts) of scientific and technical publications and lectures by the staff of the Metallurgy Department during 1988 is given. The list comprises journal papers, conference papers, reports, lectures and poster presentations in the following catagories: Publications, Lectures and Poster Presentations. (author)

  14. Metallurgy Department publications 1989

    International Nuclear Information System (INIS)

    Horsewell, A.

    1990-08-01

    All publiclations by the staff of the Metallurgy Department during 1989 are listed. This list is divided into three sections as follows: Publications (journal and conference papers, reports); Lectures (public lecture presentations) and Posters (poster presentations at conferences and symposia). Abstracts are included. (author)

  15. 75 FR 13342 - Pipeline Safety: Workshop on Distribution Pipeline Construction

    Science.gov (United States)

    2010-03-19

    ... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID... natural gas distribution construction. Natural gas distribution pipelines are subject to a unique subset... distribution pipeline construction practices. This workshop will focus solely on natural gas distribution...

  16. Iowa Department of Transportation. - Clean Water Act Public Notice

    Science.gov (United States)

    The EPA is providing notice of a proposed Administrative Penalty Assessment against Iowa Department of Transportation, a state agency with its primary office located at 800 Lincoln Way, Ames, IA 50010, for alleged violations at two roadway construction pro

  17. [Discipline construction is the theme of the development of burn surgery].

    Science.gov (United States)

    Jia, C Y

    2018-03-20

    Discipline construction is the core element of department development, including discipline structure setting, scale, equipment, medical workers structure, clinical feature and advantage, talent training, teaching level, scientific research level, management system, and cultural construction of department. As leader and engine of discipline construction, directors' ability is an important factor for discipline construction. Clinical characteristic is the basis of discipline construction; innovation actuation is the essence of discipline construction; talents training is the guarantee of discipline construction; scientific research is the wing of discipline construction; cultural construction is the hot spring of discipline construction. Discipline construction is the theme of the development of burn surgery.

  18. 46 CFR 46.10-65 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Construction. 46.10-65 Section 46.10-65 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) LOAD LINES SUBDIVISION LOAD LINES FOR PASSENGER VESSELS Administration § 46.10-65 Construction. (a) The watertight subdivision of every passenger vessel...

  19. 32 CFR 10.5 - Construction.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Construction. 10.5 Section 10.5 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE MILITARY COMMISSIONS MILITARY COMMISSION INSTRUCTIONS § 10.5 Construction. Military Commission Instructions shall be construed in a manner consistent...

  20. 29 CFR 785.7 - Judicial construction.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Judicial construction. 785.7 Section 785.7 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR STATEMENTS OF GENERAL... Hours Worked § 785.7 Judicial construction. The United States Supreme Court originally stated that...

  1. 46 CFR 111.30-5 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Construction. 111.30-5 Section 111.30-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Switchboards § 111.30-5 Construction. (a) All low voltage and medium voltage switchboards (as low...

  2. 14 CFR 125.145 - Firewall construction.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Firewall construction. 125.145 Section 125.145 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED... Requirements § 125.145 Firewall construction. Each firewall and shroud must— (a) Be so made that no hazardous...

  3. 49 CFR 1100.3 - Liberal construction.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 8 2010-10-01 2010-10-01 false Liberal construction. 1100.3 Section 1100.3 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION RULES OF PRACTICE GENERAL PROVISIONS § 1100.3 Liberal construction. The rules will...

  4. 33 CFR 86.23 - Construction.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Construction. 86.23 Section 86.23 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INLAND NAVIGATION RULES ANNEX III: TECHNICAL DETAILS OF SOUND SIGNAL APPLIANCES Bell or Gong § 86.23 Construction. Bells and gongs...

  5. 48 CFR 1422.804-2 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Construction. 1422.804-2 Section 1422.804-2 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR SOCIOECONOMIC... Construction. Bureau contracting offices are responsible for maintaining (including updates and revisions...

  6. 42 CFR 423.894 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Construction. 423.894 Section 423.894 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE... Plans § 423.894 Construction. Nothing in this part must be interpreted as prohibiting or restricting: (a...

  7. 49 CFR 219.17 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Construction. 219.17 Section 219.17 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CONTROL OF ALCOHOL AND DRUG USE General § 219.17 Construction. Nothing in this part— (a) Restricts...

  8. 43 CFR 4.1102 - Construction.

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Construction. 4.1102 Section 4.1102 Public Lands: Interior Office of the Secretary of the Interior DEPARTMENT HEARINGS AND APPEALS PROCEDURES... Construction. These rules shall be construed to achieve the just, timely, and inexpensive determination of all...

  9. Adjudication and Aribitrability of Government Construction Contracts ...

    African Journals Online (AJOL)

    The former laws apply where a private individual or company usually referred to as 'employer' (otherwise known as 'owner' or 'client') enters into a construction contract with a contractor. And the latter involves a government department which intends to have construction works carried out on behalf of the government for ...

  10. 25 CFR 900.118 - Do these “construction contract” regulations apply to construction management services?

    Science.gov (United States)

    2010-04-01

    ... construction management services? 900.118 Section 900.118 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE...” regulations apply to construction management services? No. Construction management services may be contracted separately under section 108 of the Act. Construction management services consultants and/or Indian tribe or...

  11. 7 CFR 3560.570 - Construction financing.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Construction financing. 3560.570 Section 3560.570 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, DEPARTMENT OF... financing. The requirements established in § 3560.71 apply to all applications involving off-farm labor...

  12. 7 CFR 3560.620 - Construction financing.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Construction financing. 3560.620 Section 3560.620 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, DEPARTMENT OF... financing. The requirements established in § 3560.71 apply to all applications involving on-farm labor...

  13. RH Department Information Meeting

    CERN Multimedia

    HR Department

    2010-01-01

    Dear Colleagues, HR Department would like to invite you to an information meeting which will be held on Thursday 30 September 2010 at 9:30 am in the Main Auditorium (Building 500)* A welcome coffee will be available from 9:00 a.m. The presentation will cover the CERN Competency Model which consists of the technical and behavioral competencies that are intrinsic to our Organization and its application in the various HR processes. This presentation will be followed by a questions & answers session. We look forward to seeing you all on 30 September! Best regards, Anne-Sylvie Catherin Head, Human Resources Department *This meeting will be simultaneously retransmitted and thereafter available at the following address: http://webcast.cern.ch.

  14. The Corporate Marketing Department

    DEFF Research Database (Denmark)

    Ritter, Thomas; Eggert, Andreas; Münkhoff, Eva

    Corporate marketing has been downsized or eliminated in many firms. At the same time, firms that still own a corporate marketing department struggle with organizing and positioning their commercial front‐end. The question arises whether firms need a corporate marketing department, and if so, how...... it can best add value to the firm. Based on a qualitative study among B2B companies, we develop a conceptual framework highlighting the various parental roles through which corporate marketing can contribute to overall firm and business unit performance. In addition, we identify five gaps that restrain...... successful outcomes of corporate marketing activities. In sum, our framework provides important insights on how to successfully organize corporate marketing activities....

  15. A construction process model for implementing constructability in construction

    NARCIS (Netherlands)

    Langkemper, J.; Al-Jibouri, S.; Reymen, I.M.M.J.; Maas, G.J.; Gassel, van F.

    2003-01-01

    In construction, failure of design professionals to consider how a builder will implement the design can result in scheduling problems, cost escalation, delays and disputes during the construction process. The integration of construction knowledge and experience during planning and design is termed

  16. Department of Hadron Structure - Overview

    International Nuclear Information System (INIS)

    Eskreys, A.

    2000-01-01

    research program and the detector construction has been continued with the goal to be ready by 2005. Department XII is involved in the preparation of the project of the luminosity detector. TESLA is the project of the new generation high energy e + e - linear collider, planned to be built in Hamburg. Our engineers prepared the final version of electronic board which will be used in the control system of cavities for TESLA project. The analysis of the data from the two presently continued experiments (ZEUS, D0) cover the program of research ranging from the exploration of the structure of the matter in photoproduction, deep inelastic e ± p scattering and (anti)pp collisions through the searches of the exotic and rare processes (W, Z, top, leptoquarks production) to the new approach to the traditional subject like properties of the pion emission source or property of the hadronic final states. Above outsketched research has resulted in 1999 in 29 publications in the renown scientific periodicals. (author)

  17. Progress report 1989-1990. Reactors Chemistry Department

    International Nuclear Information System (INIS)

    1991-01-01

    This paper presents a review of the activities performed by the Reactors Chemistry Department of the Argentine National Atomic Energy Commission during 1989-1990. This department provides scientific-technical services and assistance in all chemical problems related to design, construction, commissioning and decommissioning of nuclear power plants

  18. Progress report 1987-1988. Reactor Chemistry Department

    International Nuclear Information System (INIS)

    1988-01-01

    Review of the activities performed by the Reactor Chemistry Department of the National Atomic Energy Commission of Argentina during 1987-1988. This department provides services and assistance in all matters related to water chemistry and nuclear reactors chemistry, in all their phases: design, construction, commissioning and decommissioning. The appendix includes information on the Reactor Chemistry Department staff, its publications, services, seminars, courses and conferences performed during 1987-1988. (Author) [es

  19. Quarterly status of Department of Energy projects

    International Nuclear Information System (INIS)

    1982-01-01

    This Quarterly Status of Department of Energy Projects is prepared by the Office of project and Facilities Management, MA-30. The report is designed to provide Department of Energy (DOE) management officials with a summary of the important baseline data that exists in the DOE project data base. This data base is maintained chiefly from periodic field management reports required by DOE Order 5700.4. Since most of the current estimates in this report are from field project managers, they do not necessarily have full Headquarters approval. The current budget data sheet estimates that appear in the report are considered appropriate for reporting external to the Department and reflect the President's FY 1983 Budget to Congress. Moneys allocated and estimated costs, and the construction status are tabulated for projects under the subject categories of: conservation and renewable energy; defense programs; environmental protection, safety and emergency preparedness; energy research; defense programs; nuclear energy; and management and administration

  20. MATREX: A Unifying Modeling and Simulation Architecture for Live-Virtual-Constructive Applications

    Science.gov (United States)

    2007-05-23

    Deployment Systems Acquisition Operations & Support B C Sustainment FRP Decision Review FOC LRIP/IOT& ECritical Design Review Pre-Systems...CMS2 – Comprehensive Munitions & Sensor Server • CSAT – C4ISR Static Analysis Tool • C4ISR – Command & Control, Communications, Computers

  1. High Energy Physics Departments - Overview

    International Nuclear Information System (INIS)

    Bartke, J.

    1999-01-01

    Following the tradition, the activities of the seven new units created in 1997 on the basis of the former Department of High Energy Physics are presented under a common header, they are: Department of Particle Theory (Dept 5); Department of Leptonic Interactions (Dept 11); Department of Hadron Structure (Dept 12); Department of High Energy Nuclear Interactions (Dept 13); The ALICE Experiment Laboratory (NAL); The ATLAS Experiment Laboratory (NAT); High Energy Physics Detector Construction Group (PBD). The research covers a variety of problems of the experimental and theoretical high energy particle physics: the hadronic and leptonic interactions with nucleons and nuclei (characteristics of particle production, including heavy quark physics), e + e - interactions and tests of the Standard Model (also radiative corrections), ultrarelativistic heavy ion interactions and search for the quark-gluon plasma, as well as the spectra, composition and interactions of high energy cosmic ray particles. Research on detectors and accelerator components as well as the development of the apparatus for the high energy physics experiments at future accelerators: LHC (CERN, Geneva), RHIC (Brookhaven), B-Factory (KEK, Tsukuba) and TESLA (DESY) is also presented. The technology of new materials with unique properties such as carbon-carbon composites is also worked on from the point of view of their application in high energy physics experiments. The Division is located in a separate building on the campus of the University of Mining and Metallurgy (UMM). This location, close to the Jagiellonian University (JU), facilitates the collaboration with the latter and with the UMM. The joint weekly seminars carried out for nearly 40 years prove this long term tradition. A substantial part of the activities is teaching and training students from the academic community in Cracow. Joint research, teaching and academic training in the high energy physics are carried out within the M. Miesowicz

  2. Department of Energy licensing strategy

    International Nuclear Information System (INIS)

    Frei, M.W.

    1984-01-01

    The Department of Energy (DOE) is authorized by the Nuclear Waste Policy Act of 1982 (Act) to site, design, construct, and operate mined geologic repositories for high-level radioactive wastes and is required to obtain licenses from the Nuclear Regulatory Commission (NRC) to achieve that mandate. To this end the DOE has developed a licensing approach which defines program strategies and which will facilitate and ease the licensing process. This paper will discuss the regulatory framework within which the repository program is conducted, the DOE licensing strategy, and the interactions between DOE and NRC in implementing the strategy. A licensing strategy is made necessary by the unique technical nature of the repository. Such a facility has never before been licensed; furthermore, the duration of isolation of waste demanded by the proposed EPA standard will require a degree of reliance on probabilistic performance assessment as proof of compliance that is a first of a kind for any industry. The licensing strategy is also made necessary by the complex interrelationships among the many involved governmental agencies and even within DOE itself, and because these relationships will change with time. Program activities which recognize these relationships are essential for implementing the Act. The guiding principle in this strategy is an overriding commitment to safeguarding public health and safety and to protecting the environment

  3. Quality of Graduate Department Origin of Faculty and Its Relationship to Undergraduate Course Examination Questions.

    Science.gov (United States)

    Braxton, John M.; Nordvall, Robert C.

    1988-01-01

    Quality of a faculty member's graduate department origin and its relationship to test construction was examined. Findings indicated a tendency for faculty holding advanced degrees from higher quality graduate departments to ask more synthesis questions. (Author/MLW)

  4. Constructing Aligned Assessments Using Automated Test Construction

    Science.gov (United States)

    Porter, Andrew; Polikoff, Morgan S.; Barghaus, Katherine M.; Yang, Rui

    2013-01-01

    We describe an innovative automated test construction algorithm for building aligned achievement tests. By incorporating the algorithm into the test construction process, along with other test construction procedures for building reliable and unbiased assessments, the result is much more valid tests than result from current test construction…

  5. Perspectives of construction robots

    Science.gov (United States)

    Stepanov, M. A.; Gridchin, A. M.

    2018-03-01

    This article is an overview of construction robots features, based on formulating the list of requirements for different types of construction robots in relation to different types of construction works.. It describes a variety of construction works and ways to construct new or to adapt existing robot designs for a construction process. Also, it shows the prospects of AI-controlled machines, implementation of automated control systems and networks on construction sites. In the end, different ways to develop and improve, including ecological aspect, the construction process through the wide robotization, creating of data communication networks and, in perspective, establishing of fully AI-controlled construction complex are formulated.

  6. Scientific Services Department

    International Nuclear Information System (INIS)

    SSD in the South Western Region employs more than 200 people, of which 90% are scientists or engineers. Their purpose is to understand and clarify the extensive technical issues which arise during the operation of many different types of plant spread over a wide area of Southern England and South Wales. Priority is given to work in terms of its potential value to the Board. This brochure illustrates some aspects of the work of SSD. Based at Regional Headquarters in Bristol, the Department undertakes 'on site' inspection followed by more thorough laboratory examinations for the diagnosis of faults, and carries out selected research activities. Most of this effort is directed towards the three nuclear sites and four large conventional power stations in the Region. (author)

  7. Construction completion report

    International Nuclear Information System (INIS)

    1990-01-01

    This Construction Completion Report documents the major construction projects at the Waste Isolation Pilot Plant (WIPP) site and related information on contracts, schedules, and other areas which affected construction. This report is not intended to be an exhaustive detailed analysis of construction, but is a general overview and summary of the WIPP construction. 10 refs., 29 figs

  8. Department of Leptonic Interactions - Overview

    International Nuclear Information System (INIS)

    Rybicki, K.

    2002-01-01

    Full text: Our Department has evolved from the Laboratory of Electronic Particle Detectors (originally called the Laboratory of Filmless Detectors) founded in 1972. The department is involved in two running experiments (H1 at DESY and Belle at KEK). In 2000 the DELPHI experiment has finished a decade of successful running. The analysis of collected data will continue for a couple of years. Since 1999 our group is a member of the LHC-b experiment at CERN. In addition, a few department members work part-time for the ATLAS collaboration at CERN, and our engineers as well as technicians have been working for several years on the construction and testing of superconducting cavities for the TESLA project. This arrangement provides a neat equilibrium between data analysis, running experiments and work on future projects. The main results of work done in 2001 are covered in reports on research. Here we mention only a few highlights: * The Belle experiment demonstrated a strong CP violation in B 0 d decays. The measured asymmetry was sin(2φ 1 ) 0:99 ±0:14±0:06. This is the first (together with the BaBar experiment at SLAC) observation of the CP violation outside the K 0 sector. * The DELPHI collaboration (together with other LEP experiments) determined very precisely the parameters of the Standard Model in the electroweak sector and showed the strongest limit on the direct Higgs search i.e. m H >114 GeV. * The H1 experiment has measured the cross section for the b quark production to be much larger than the NLO QCD predictions. This is especially surprising in Deep Inelastic ep Scattering where the predictions should be fairly solid. * The Cracow LHCb group has designed and tested the prototype of the outer tracker. One should also mention high-quality carbon-carbon composites designed and produced in collaboration with the High Energy Physics Detector Construction Group. In 2001 there were 43 papers (meeting the highest Polish State Committee for Scientific Research

  9. Concrete construction engineering handbook

    CERN Document Server

    Nawy, Edward G

    2008-01-01

    Provides coverage of concrete construction engineering and technology. This work features discussions focusing on: the advances in engineered concrete materials; reinforced concrete construction; specialized construction techniques; and, design recommendations for high performance.

  10. Department of Genetics

    International Nuclear Information System (INIS)

    2000-01-01

    Full text: There are five independent research groups in the Department conducting the following lines of investigations: 1. Regulation of sulfur amino acid metabolism in fungi, focusing on cloning and characterisation of structural and regulatory genes in Aspergillus nidulans. 2. Identification and characterization of S. cerevisiae genes involved in the regulation of tRNA biosynthesis and control of translation fidelity in cytosolic and mitochondrial systems. 3. Mechanism of DNA repair and mutagenesis by using mutations in DNA polymerases, mismatch repair and radiation sensitivity genes to study their influence on the generation of mutations in nondividing, resting cells (adaptive mutations) in S. cerevisiae. 4. Pleiotropic effects of the S. cerevisiae IRR1 gene, particularily on colony formation and sister chromatid cohesion. 5. Regulation of heme synthesis in S. cerevisiae: the analysis of structure-function relationship of ferrochelatase (the last enzyme of the pathway). 6. Role of RSP5 the ubiquitin-protein ligase of S. cerevisiae in protein import to mitochondria and endocytosis of plasma membrane proteins. 7. Molecular analysis of the glucose-6-phosphate dehydrogenase gene in Polish 6-GDP deficient subjects. 8. Genetic and phylogenic studies of the Polish Bison bonasus population with the use of nuclear and mitochondrial markers

  11. High Energy Physics Departments - Overview

    International Nuclear Information System (INIS)

    Bartke, J.

    2000-01-01

    Full text: Following our long-time tradition we will present under a common header the activities of the seven new units created in 1997 on the basis of the former Department of High Energy Physics: Department of Particle Theory (Dept. V); Department of Leptonic Interactions (Dept XI); Department of Hadron Structure (Dept XII); Department of High Energy Nuclear Interactions (Dept XIII); The ALICE Experiment Laboratory (NAL); The ATLAS Experiment Laboratory (NAT); High Energy Physics Detector Construction Group (PBD). At the end we will list our common activities: lectures and courses as well as seminars. Our research covers a variety of problems of the experimental and theoretical high energy particle physics: the hadronic and leptonic interactions with nucleons and nuclei (characteristics of particle production, including heavy quark physics), e + e - interactions and tests of the Standard Model (also evaluation of radiative corrections), ultrarelativistic heavy ion interactions and search for the quark-gluon plasma, as well as the spectra, composition and interactions of high energy cosmic ray particles. Research on detectors and accelerator components as well as the development of the apparatus for the high energy physics experiments at future accelerators: LHC (CERN, Geneva), RHIC (Brookhaven), B-Factory (KEK, Tsukuba) and TESLA (DESY, Hamburg) is also carried out. The technology of new materials with unique properties such as carbon-carbon composites is also worked on from the point of view of their application in high energy physics experiments. The Division is located in a separate building on the campus of the University of Mining and Metallurgy. This location, close to the Jagiellonian University, facilitates the collaboration with the latter and with the University of Mining and Metallurgy. The joint weekly seminars carried out for nearly 40 years prove this long term tradition. A substantial part of our activities is teaching and training students from

  12. 48 CFR 1336.270 - Special requirements for ship construction

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Special requirements for ship construction 1336.270 Section 1336.270 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 1336.270 Special...

  13. 34 CFR 76.600 - Where to find construction regulations.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Where to find construction regulations. 76.600 Section 76.600 Education Office of the Secretary, Department of Education STATE-ADMINISTERED PROGRAMS What Conditions Must Be Met by the State and Its Subgrantees? Construction § 76.600 Where to find construction...

  14. Causes of defects in the South African housing construction industry ...

    African Journals Online (AJOL)

    Martyn le Roux, Department of Quantity Surveying, P.O. Box 77000, Nelson Mandela ... in South Africa. There is a shortage of skilled people in the South. African construction industry; local and international companies within the construction industry are joining ..... observation of construction of any new home or building.

  15. 49 CFR 231.18 - Cars of special construction.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Cars of special construction. 231.18 Section 231... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.18 Cars of special construction. Cars of construction not covered specifically in the foregoing sections in this part, relative to...

  16. 49 CFR 1150.36 - Exempt construction of connecting track.

    Science.gov (United States)

    2010-10-01

    ... shippers from abuse of market power; and that the construction of connecting track would be of limited... 49 Transportation 8 2010-10-01 2010-10-01 false Exempt construction of connecting track. 1150.36... TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION RULES OF PRACTICE CERTIFICATE TO CONSTRUCT, ACQUIRE, OR...

  17. 77 FR 12106 - Kapka Butte Sno-Park Construction

    Science.gov (United States)

    2012-02-28

    ... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Kapka Butte Sno-Park Construction... Construction project. SUMMARY: The FHWA is issuing this notice to advise the public that the FHWA is officially designated as the Joint-Lead Agency pursuant to 23 U.S.C. 139(c)(1) for the Kapka Butte Sno-Park Construction...

  18. 7 CFR 1924.259 - Handling dwelling construction complaints.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false Handling dwelling construction complaints. 1924.259 Section 1924.259 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING... Construction Defects § 1924.259 Handling dwelling construction complaints. This section describes the procedure...

  19. 7 CFR 1944.424 - Dwelling construction and standards.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 13 2010-01-01 2009-01-01 true Dwelling construction and standards. 1944.424 Section 1944.424 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE....424 Dwelling construction and standards. All construction will be performed in accordance with subpart...

  20. BE Department Annual Report 2016

    CERN Document Server

    Collier, Paul; Billen, Ronny; Hatziangeli, Eugenia; Jensen, Erk; Jones, Rhodri; Lamont, Mike; Mackney, Anna; Sollander, Peter; Steerenberg, Rende

    2017-01-01

    The Beams Department hosts the Groups responsible for the beam generation, acceleration, diagnostics, controls and performance optimization for the whole CERN accelerator complex. This Report describes the 2016 highlights for the BE Department.

  1. Department of Molecular Biology

    International Nuclear Information System (INIS)

    2000-01-01

    Full text: The Department's continuing interest is centered on the mechanisms of mutagenesis and DNA repair. Part of the studies concerns the effects of the interdependence of mutator and antimutator genes on the response of E. coli cells to various mutagens. The phenomenon of mutation frequency decline (MFD) was studied and recently distinct response of this system to UV light and to alkylating agents was shown. Studies on the isfA gene, which is involved in the regulation of the SOS response, including its precise localization on the bacterial chromosome, were continued. Also, studies on the mechanism of DNA replication-independent mutagenesis in lambda phage were continued. Halogen light mutagenesis and the role of the hem gene in the near UV and UVA irradiation mutagenesis were investigated. New experimental approaches were adapted to study adaptive mutations. Another part of the studies was focused on the relation between the structure of DNA bases adducts and their coding and mutagenic properties, as well as their properties as substrates for DNA repair enzymes. These studies include instrumental methods, such as NMR, MS, HPLC and GC/MS, to investigate structure and the kinetics of formation and excision of adducts, and organic chemistry methods to synthesize adducts. The coding and mutagenic properties of several oxidized and alkylated bases (including imidazole-ring opened purines) were determined by employing in vitro enzymatic and phage/bacteria systems. The sites of reaction of chloroacetaldehyde, a metabolite of carcinogenic vinyl chloride, with a fragment of human p53 gene, were studied using the method of polymerase fingerprint analysis. Ethenoadducts, the products of the reaction of chloroacetaldehyde with adenine and cytosine, and also products of solvolytic degradation of ethenoadenine, were studied as substrates of various DNA glycosylases. Several purine and pyrimidine derivatives were synthesized and tested as inhibitors of DNA glycosylases

  2. [The evaluation of academic emergency department design].

    Science.gov (United States)

    Deniz, Turgut; Aydinuraz, Kuzey; Oktay, Cem; Saygun, Meral; Ağalar, Fatih

    2007-01-01

    In our study which was based upon a questionnaire, the inner and outer architectural designs of emergency services of Emergency Medicine Departments were investigated. In this descriptive study, a standard questionnaire was sent to 26 Emergency Medicine Departments which were operating at that time. In the questionnaire, the internal, external architectural and functional features were questioned. Answers of 22 Emergency Medicine Departments were analysed. Two Emergency Medicine Departments that were not operating at that time were not included in the study. The analysis of the replies revealed that only 59% (n=13) of the Emergency Medicine Departments were designed as an emergency service prior to the construction. The ambulance parking areas were not suitable in 77% of the emergency units while only 54.5% (n=12) had protection against adverse weather conditions. In only 59% (n=13) of the emergency units, a triage unit was present and in only one of the in only one (4.5%), a decontamination room was available. It was understood that only 32% (n=8) of the emergency units were appropriate in enlarging their capacity taking the local risk factors into consideration. There was a toilette for disabled patients in only 18% (n=4) of the units as well. Considering a 12-year of history of the Emergency Medicine in Turkey, the presence of a lecture room is still 68% (n=15) in emergency departments which reflects that academic efforts in this field is emerging in challenging physical conditions. The results of our study revealed that emergency service architecture was neglected in Turkey and medical care given was precluded by the insufficient architecture. The design of emergency services has to be accomplished under guidance of scientific data and rules taking advices of architects who have knowledge and experience on this field.

  3. W-320 Department of Health documentation

    International Nuclear Information System (INIS)

    Bailey, J.W.

    1998-01-01

    The purpose of this document is to gather information required to show that Project W-320 is in compliance with Washington State Department of Health requirements as specified in Radioactive Air Emissions Notice of Construction Project W-320, Tank 241-C-106 Sluicing, DOE/RL-95-45. Specifically, that W-320 is in compliance with ASME N509-1989 (Nuclear Power Plant Air-Cleaning Units and Components) and ASME N5 10-1989 (Testing of Nuclear Air Treatment Systems) for the 296-C-006 exhaust system

  4. Progress report of the nuclear physics department

    International Nuclear Information System (INIS)

    1987-01-01

    This progress report presents the experiments and the technological studies carried out at the Nuclear Physics Department of Saclay from October 1, 1985 to September 30, 1986. These studies concern the structure of nuclei, the nuclear reaction mechanisms and, more and more, mesic processes in nuclear dynamics. The experiments have been carried at the 700 MeV electron linac, the synchrotron SATURNE, the heavy ion accelerator GANIL, the SARA facility at Grenoble. An important technical activity has been devoted to the construction of the supraconducting booster of the 9 MV tandem [fr

  5. W-320 Department of Health documentation

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, J.W.

    1998-08-07

    The purpose of this document is to gather information required to show that Project W-320 is in compliance with Washington State Department of Health requirements as specified in Radioactive Air Emissions Notice of Construction Project W-320, Tank 241-C-106 Sluicing, DOE/RL-95-45. Specifically, that W-320 is in compliance with ASME N509-1989 (Nuclear Power Plant Air-Cleaning Units and Components) and ASME N5 10-1989 (Testing of Nuclear Air Treatment Systems) for the 296-C-006 exhaust system.

  6. Progress report of the nuclear physics department

    International Nuclear Information System (INIS)

    1986-01-01

    This progress report presents the experiments and the technological studies carried out at the Nuclear Physics Department of Saclay from October 1, 1984 to September 30, 1985. These studies concern the structure of nuclei, the nuclear reaction mechanisms and, more and more, mesic processes in nuclear dynamics. The experiments have been carried at the 700 MeV electron linac, the synchrotron SATURNE, the heavy ion accelerator GANIL, the SARA facility at Grenoble, and the antiproton beams at CERN. An important technical activity has been devoted to the construction of the supraconducting booster of the 9 MV tandem [fr

  7. Department of Nuclear Energy

    International Nuclear Information System (INIS)

    2002-01-01

    Full text: The activities of Department was engaged in the selected topics in nuclear fission reactor science and engineering. Present and future industry competitiveness, economic prosperity and living standards within the world are strongly dependent on maintaining the availability of energy at reasonable prices and with security of supply. Also, protection of man and the environment from the harmful effects of all uses of energy is an important element of the quality of life especially in Europe. It is unrealistic to assume that the technology for renewable (hydro, wind, solar and biomass) available within a 20-30 year perspective could provide the production capacity to replace present use of nuclear power and at the same time substantially reduce the use of fossil fuels, especially when considering that energy demand in industrialized countries can be expected to continue to increase even within a framework of overall energy conservation and continued improvement of efficiency in energy usage. In the area of nuclear fission, we continue support to maintain and develop the competence needed to ensure the safety of existing and future reactors and other nuclear installations. In addition support is given to explore the potential for improving present fission technology from a sustainable development point of view. The focus on advanced modelling of improved reactor and fuel cycle concepts, including supporting experimental research, with a view to improving the utilisation of the inherent energy content of uranium and other nuclear fuels, whilst at the same time reducing the amount of long-lived radioactive waste produced. A common scientific understanding of the frequently used concept of ''reasonable assurance of safety'' for the long-term, post-closure phase of repositories for spent fuel and high-level waste developed in order to ensure reasonably equivalent legal interpretations in environmental impact assessment and licensing procedures. Also, research is

  8. The experience of Electricity Municipal Department of Pocos de Caldas, state of Minas Gerais, Brazil, in conception and construction of Antas 2 hydroelectric power plant: a hand-made power plant; A experiencia do Departamento Municipal de Eletricidade de Pocos de Caldas na concepcao e construcao da Usina Hidreletrica Antas 2: uma usina concebida e realizada na ponta do lapis

    Energy Technology Data Exchange (ETDEWEB)

    Moraes, Cicero Machado de [Departamento Municipal de Eletricidade de Pocos de Caldas, MG (Brazil); Nasseh, Oscar [Mecanica Pesada S.A., Taubate, SP (Brazil); Hellmuth, Harald [Siemens S.A. (Brazil)

    1993-12-31

    The Antas 2 hydroelectric power plant, located in Pocos de Caldas, state of Minas Gerais, Brazil, is under construction and have deadline to start operation in the beginning of 1994. Considered a high-head plant, with 165,05 m of fall, Antas 2 have three generation units of 5,7 MW and will supply a residential and industry demand of electric energy. This paper presents that the construction of an energy profit with this capacity can be performed under the mostly updated technologies with low costs, resulting in a high productivity, with reliance and asserted rentability profit 1 tab.

  9. Department of Defense Technology Transfer (T2) Program

    Science.gov (United States)

    2014-04-08

    January February (1st Monday) Disposal System Performance Spec Production Representative Articles CARD – Cost Analysis Requirements Description CCE...Supportability Objectives Exit Criteria Met APB MTA FMECA FTA LORA RCM MS B Threshold/objective tradeoffs – Revised Performance Attributes MS C MS A...Evaluation FTA – Failure Tree Analysis IOT&E – Initial Operational Test & Evaluation ISR – In-Service Review ISP – Information Support Plan ITR – Initial

  10. Mechanical engineering department technical review

    International Nuclear Information System (INIS)

    Carr, R.B.; Denney, R.M.

    1981-01-01

    The Mechanical Engineering Department Technical Review is published to: (1) inform the readers of various technical activities within the department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical acievements and publication abstracts. The first is divided into eight sections, one for each division in the department providing the reader with the names of the personnel and the division accomplishing the work

  11. Mechanical Engineering Department. Technical review

    Energy Technology Data Exchange (ETDEWEB)

    Simecka, W.B.; Condouris, R.A.; Talaber, C. (eds.)

    1980-01-01

    The Mechanical Engineering Department Technical Review is published to (1) inform the readers of various technical activities within the Department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical achievements and publication abstracts. The first is divided into eight sections, one for each Division in the Department providing the reader with the names of the personnel and the Division accomplishing the work.

  12. Mechanical Engineering Department technical abstracts

    International Nuclear Information System (INIS)

    Denney, R.M.

    1982-01-01

    The Mechanical Engineering Department publishes listings of technical abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). Overall information about current activities of each of the Department's seven divisions precedes the technical abstracts

  13. Materials Department. Annual report 1990

    International Nuclear Information System (INIS)

    Horsewell, A.; Hansen, N.

    1991-07-01

    Selected activities of the Materials Department at Risoe National Laboratory during 1990 are described. The work is presented in three chapters: Materials Science, Materials Engineering and Materials Technology. A survey is given of the Department's participation in international collaboration and of its activities within education and training. Furthermore, the main figures outlining the funding and expenditure of the Department are given. Lists of staff members, visiting scientists, publications, lectures and poster presentations are included. (author) 91 refs., 46 ills

  14. Materials Department. Annual report 1991

    International Nuclear Information System (INIS)

    Horsewell, A.; Hansen, N.

    1992-03-01

    Selected activities of the Materials Department at Risoe National Laboratory during 1991 are described. The work is presented in three chapters: Materials Science, Materials Engineering and Materials Technology. A survey is given of the Department's participation in international collaboration and of its activities within education and training. Furthermore, the main figures outlining the funding and expenditure of the Department are given. Lists of staff members, visiting scientists, publications, lectures and poster presentations are included. (au)

  15. Mechanical Engineering Department. Technical review

    International Nuclear Information System (INIS)

    Simecka, W.B.; Condouris, R.A.; Talaber, C.

    1980-01-01

    The Mechanical Engineering Department Technical Review is published to (1) inform the readers of various technical activities within the Department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical achievements and publication abstracts. The first is divided into eight sections, one for each Division in the Department providing the reader with the names of the personnel and the Division accomplishing the work

  16. Department of Theoretical Physics - Overview

    International Nuclear Information System (INIS)

    Kwiecinski, J.

    2000-01-01

    Full text: Research activity of the Department of Theoretical Physics concerns theoretical high-energy and elementary particle physics, intermediate energy particle physics, theoretical nuclear physics, theory of nuclear matter, theory of quark-gluon plasma and of relativistic heavy-ion collisions, theoretical astrophysics and general physics. There is some emphasis on the phenomenological applications of the theoretical research, yet the more formal problems are also considered. The detailed summary of the research projects and of the results obtained in various fields is given in the abstracts. Our Department actively collaborates with other Departments of the Institute as well as with several scientific institutions both in Poland and abroad. In particular members of our Department participate in the EC network which allows mobility of researchers. Several members of our Department have also participated in the research projects funded by the Polish Committee for Scientific Research (KBN). The complete list of grants is listed separately. Besides pure research, members of our Department are also involved in graduate and undergraduate teaching activity both at our Institute as well as at other academic institutions in Cracow. At present five students are working for their Ph.D. or MSc degrees under supervision of the senior members from the Department. We continue our participation at the EC SOCRATES-ERASMUS educational programme which allows exchange of graduate students between our Department and the Department of Physics of the University of Durham in the UK. (author)

  17. Construction dust amelioration techniques.

    Science.gov (United States)

    2012-04-01

    Dust produced on seasonal road construction sites in Alaska is both a traffic safety and environmental concern. Dust emanating from : unpaved road surfaces during construction severely reduces visibility and impacts stopping sight distance, and contr...

  18. Improving concrete overlay construction.

    Science.gov (United States)

    2010-03-01

    Several road construction projects involving concrete overlays at the state and county levels in Iowa in 2009 were studied for : construction techniques and methods. The projects that were evaluated consisted of sites in four Iowa counties: Osceola, ...

  19. Construction project management handbook.

    Science.gov (United States)

    2012-03-01

    The purpose of the FTA Construction Project Management Handbook is to provide guidelines for use by public transit agencies (Agen-cies) undertaking substantial construction projects, either for the first time or with little prior experience with cons...

  20. Visualization of construction engineering

    International Nuclear Information System (INIS)

    Okada, Hisako; Miura, Jun

    2000-01-01

    It is required for nuclear power plant construction to reduce construction cost and shorten construction period. An early and accurate construction planning including schedule coordination among the companies has recently become more important and it is possible to obtain necessary information for construction planning in early stage. In this situation, we have been developing a visualization system for construction engineering for nuclear power plants. This system has an interface with the existing Plant Layout 3D-CAD system and consists of three sub systems: (1) Scheduling and simulation system, (2) Yard planning system and (3) Scaffolding planning system. This paper describes overview of this system. This visualization system is very helpful for construction engineers to easily understand situation and environment around installation area, to easily plan a work sequence and confirm the planned schedule, and it is also effective for customers and workers to understand the planning. As a result, this visualization system enables safety and high quality construction. (author)

  1. Construction Sector (NAICS 23)

    Science.gov (United States)

    Find environmental regulatory information for the construction sector, including the construction of buildings or engineering projects. This includes RCRA information for hazardous waste, refrigeration compliance, asbestos, effluent guidelines & lead laws

  2. Organizational Behaviour in Construction

    DEFF Research Database (Denmark)

    Kreiner, Kristian

    2013-01-01

    Review of: Organizational Behaviour in Construction / Anthony Walker (Wiley-Blackwell,2011 336 pp)......Review of: Organizational Behaviour in Construction / Anthony Walker (Wiley-Blackwell,2011 336 pp)...

  3. USAID Construction Assessment

    Data.gov (United States)

    US Agency for International Development — The USAID construction assessment is a survey of the character, scope, value and management of construction activities supported by USAID during the period from June...

  4. Validating MEDIQUAL Constructs

    Science.gov (United States)

    Lee, Sang-Gun; Min, Jae H.

    In this paper, we validate MEDIQUAL constructs through the different media users in help desk service. In previous research, only two end-users' constructs were used: assurance and responsiveness. In this paper, we extend MEDIQUAL constructs to include reliability, empathy, assurance, tangibles, and responsiveness, which are based on the SERVQUAL theory. The results suggest that: 1) five MEDIQUAL constructs are validated through the factor analysis. That is, importance of the constructs have relatively high correlations between measures of the same construct using different methods and low correlations between measures of the constructs that are expected to differ; and 2) five MEDIQUAL constructs are statistically significant on media users' satisfaction in help desk service by regression analysis.

  5. Heterotic string construction

    International Nuclear Information System (INIS)

    Schellekens, A.N.

    1989-01-01

    In this paper an elementary introduction to the principles of four-dimensional string construction will be given. Although the emphasis is on lattice constructions, almost all results have further, and often quite straightforward generalizations to other constructions. Since heterotic strings look phenomenologically more promising than type-II theories the authors only consider the former, although everything can easily be generalized to type-II theories. Some additional aspects of lattice constructions are discussed, and an extensive review can be found

  6. Safety in construction industry

    International Nuclear Information System (INIS)

    Khan, A.M.

    1979-01-01

    Causative factors of accidents in construction industry in the context of experience of construction work of the Rajasthan Atomic Power Project are enumerated. The aspect of accident cost - direct and indirect - is discussed briefly. Setting up of a safety set-up at construction sites is emphasized and principles which should guide the accident prevention programme are spelt out. (M.G.B.)

  7. MODULAR CONSTRUCTION SYSTEM EVALUATION

    International Nuclear Information System (INIS)

    Gillespie, S.

    2002-01-01

    The purpose of this study is to respond to U.S. Department of Energy (DOE) Technical Direction Letter (TDL) 02-003 (Waisley 2001), which directs Bechtel SAIC Company, LLC (BSC) to complete a design study to recommend repository design options to support receipt and/or emplacement of any or all of the following: commercial spent nuclear fuel (CSNF), high-level radioactive waste (HLW), DOE-managed spent nuclear fuel (DSNF) (including naval spent nuclear fuel [SNF]), and immobilized plutonium (if available), as soon as practicable, but no later than 2010. From the possible design options, a recommended approach will be determined for further evaluation to support the preliminary design of the repository. This study integrates the results of the repository Design Evolution Study (Rowe 2002) with supporting studies concerning national transportation options (BSC 2002b) and Nevada transportation options (Gehner 2002). The repository Design Evolution Study documents the processes used to reevaluate the design, construction, operation, and cost of the repository in response to TDL 02-003 (Waisley 2001), and to determine possible repository conceptual design options. The transportation studies evaluate the national and Nevada transportation options that support the repository conceptual design options. An evaluation methodology was established, based on Program-level requirements developed for the study in reference BSC 2001a, to allow the repository and system design options to be evaluated on a consistent basis. The transportation options and the design components were integrated into system design implementation options, which were evaluated using receipt and emplacement scenarios. The scenarios tested the ability of the design concept to adapt to changes in funding, waste receipt rate, and Nevada rail transportation availability. The results of the evaluation (in terms of system throughput, cost, and schedule) were then compared to the Program-level requirements, and

  8. 49 CFR 587.17 - Construction.

    Science.gov (United States)

    2010-10-01

    ... Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DEFORMABLE BARRIERS Offset Deformable Barrier § 587.17 Construction... in), 700 mm (27.5 in), 900 mm (35.4 in) horizontally, from either edge of the barrier. All holes are...

  9. Emergency Department Management of Trauma

    DEFF Research Database (Denmark)

    MacKenzie, Colin; Lippert, Freddy

    1999-01-01

    Initial assessment and management of severely injured patients may occur in a specialized area of an emergency department or in a specialized area of a trauma center. The time from injury until definitive management is of essence for survival of life-threatening trauma. The initial care delivered...... injured patients after these patients reach a hospital emergency department or a trauma center....

  10. Consumers’ preferences regarding department stores

    NARCIS (Netherlands)

    van Laarhoven, W.; Borgers, A.W.J.; van den Berg, P.E.W.

    2017-01-01

    The main reason for this research was the bankruptcy of one the Dutch oldest and largest chain of department stores at the end of 2015. The main goal of this research is to find what, from a consumers’ perspective, a department store should look like. A four storey (1500 m2 each) building was

  11. Financing Academic Departments of Psychiatry

    Science.gov (United States)

    Liptzin, Benjamin; Meyer, Roger E.

    2011-01-01

    Objective: The authors describe the many financial challenges facing academic departments of psychiatry and the resulting opportunities that may arise. Method: The authors review the history of financial challenges, the current economic situation, and what may lie ahead for academic departments of psychiatry. Results: The current environment has…

  12. Department of High Energy Physics: Overview

    International Nuclear Information System (INIS)

    Bialkowska, H.

    2002-01-01

    Full text:The activities of the Department of High Energy Physics are centered around experiments performed at accelerators in the following laboratories: * At CERN, the European Laboratory for Particle Physics in Geneva, Switzerland: - DELPHI at LEP e + e - storage ring - the tests of the Standard Model, b-quark physics, gamma-gamma interactions and search for Higgs boson and supersymmetric particles - NA48 - the CP-violation and rare K 0 decays - COMPASS (Compact Muon and Proton Apparatus for Structure and Spectroscopy) - studies the gluon polarization in the nucleon - NA49 and WA98 - heavy ion physics, looking for possible effects of the phase transition to the quark-gluon plasma state. * At CELSIUS Storage Ring in Uppsala, Sweden: - WASA - a precise study of near threshold resonance production. * At DESY in Hamburg, Germany: - ZEUS - deep inelastic scattering of electrons and protons, proton structure functions, diffractive photon-proton interactions. * Super-Kamiokande and Icarus - neutrino mass and oscillations study. The groups of our Department participated in the construction phase of the experiments, both in hardware and in development of the software used in data analysis. Presently they take part in the data collection, detector performance supervision and data analysis. The Department is also actively involved in the preparation of new experiments: - CMS (Compact Muon Solenoid) at the LHC, - LHCb (b-quark production and CP-violation) at the LHC (Large Hadron Collider) at CERN, - ALICE - experiment to study the heavy ion interactions at the LHC, - ICARUS - tests of a liquid argon TPC, in preparation, for neutrino beam (CERN to Gran Sasso), and to be used for cosmic neutrino detection, - study of charge exchange processes in d-p collisions at Nuclotron in Dubna. A mechanical workshop attached to our Department, participated in the construction of the prototypes for the alignment monitoring system for the Outer Tracker detector in the LHCb experiment. Now

  13. Department of High Energy Physics: Overview

    International Nuclear Information System (INIS)

    Bialkowska, H.

    2003-01-01

    Full text: The activities of the Department of High Energy Physics are centered around experiments performed at accelerators in the following laboratories: - At CERN, the European Laboratory for Particle Physics in Geneva, Switzerland: - DELPHI at LEP e + e - storage ring - the tests of the Standard Model, b-quark physics, gamma-gamma interactions and search for Higgs boson and supersymmetric particles - NA48 - - the CP-violation and rare K 0 decays - COMPASS (Compact Muon and Proton Apparatus for Structure and Spectroscopy) - studies the gluon polarization in the nucleon - NA49 and WA98 - heavy ion physics, looking for possible effects of the phase transition to the quark-gluon plasma state. - At CELSIUS Storage Ring in Uppsala, Sweden: - WASA - a precise study of near threshold resonance production. - At DESY in Hamburg, Germany: - ZEUS - deep inelastic scattering of electrons and protons, proton structure functions, diffractive photon-proton interactions. - Super-Kamiokande and Icarus - neutrino mass and oscillation studies. The groups of our Department participated in the construction phase of the experiments, both in hardware and in the development of the software used in data analysis. Presently they take part in data collection, detector performance supervision and data analysis. The Department is also involved in the preparation of new experiments: - CMS (Compact Muon Solenoid) at the LHC, - LHCb (b-quark production and CP-violation) at the LHC (Large Hadron Collider) at CERN, - ALICE - experiment to study the heavy ion interactions at the LHC, - ICARUS - tests of a liquid argon TPC, in preparation, for neutrino beam (CERN to Gran Sasso), and to be used for cosmic neutrino detection, - the study of charge exchange processes in d-p collisions at Nuclotron in Dubna. A mechanical workshop attached to our Department participated in the construction of the prototypes for the alignment monitoring system for the Outer Tracker detector in the LHCb experiment. Now a

  14. Department of High Energy Physics: Overview

    International Nuclear Information System (INIS)

    Bialkowska, H.

    2004-01-01

    Full text: The activities of the Department of High Energy Physics are centered around experiments performed at accelerators in the following laboratories: - At CERN, the European Laboratory for Particle Physics in Geneva, Switzerland: - DELPHI at LEP e + e - storage ring - the tests of the Standard Model, b-quark physics, gamma-gamma interactions and search for Higgs boson and supersymmetric particles; - NA4B - the CP-violation and rare K 0 decays; - COMPASS (Compact Muon and Proton Apparatus for Structure and Spectroscopy) - studies the gluon polarization in the nucleon; - NA49 and WA98 - heavy ion physics, looking for possible effects of the phase transition to the quark-gluon plasma state. At CELSIUS Storage Ring in Uppsala, Sweden: - WASA - a precise study of near threshold resonance production. - At RHIC - study of pp elastic scattering. - At DESY in Hamburg, Germany: - ZEUS - deep inelastic scattering of electrons and protons, proton structure functions, diffractive photon-photon interactions. - Super-Kamiokande and K2 K - a study of neutrino oscillations. The groups from our Department participated in the construction phase of the experiments, both in hardware and in development of the software used in data analysis. Presently they take part in the data collection, detector performance supervision and data analysis. The Department is also involved in the preparation of new experiments: - search for optical flashes of cosmic origin: ''π of the sky'' project - search for optical counterparts of γ ray bursts, - CMS (Compact Muon Solenoid) at the LHC, - LHCb (b-quark production and CP-violation) at the LHC (Large Hadron Collider) at CERN, - ALICE - experiment to study the heavy ion interactions at the LHC, - ICARUS - tests of a liquid argon TPC, in preparation for neutrino beam (CERN to Gran Sasso), and to be used for cosmic neutrino detection, - study of charge exchange processes in d-p collisions at Nuclotron in Dubna. A mechanical workshop attached to our

  15. Department of High Energy Physics: Overview

    International Nuclear Information System (INIS)

    Nassalski, J.

    2000-01-01

    Full text: The activities of the Department of High Energy Physics are centered around experiments performed at accelerators in the following laboratories: 1. At CERN, the European Laboratory for Particle Physics in Geneva, Switzerland: - DELPHI at LEP e + e - storage ring is concerned mainly with the tests of the Standard Model, b-quark physics, gamma-gamma interactions and search for Higgs boson and supersymmetric particles; - NA48 - studies of the CP-violation in rare K 0 decays; - SMC - Spin Muon Collaboration is investigating the spin dependent nucleon structure functions and the gluon role in the nucleon spin; - NA49 and WA98 deal with heavy ion physics looking for possible effects of the phase transition to the quark-gluon plasma state. 2. At CELSIUS Storage Ring in Uppsala, Sweden: - WASA - the production of light mesons near threshold and their rare decays. 3. At DESY in Hamburg, Germany: - ZEUS - deep inelastic scattering of electrons and protons, proton structure functions, diffractive photon-proton interactions. The groups of our Department participated in the construction phase of the experiments, both in hardware and in development of the software used in data analysis. Presently they take part in the data acquisition, detector performance supervision and data analysis. The Department is also actively involved in the preparation of new experiments: - CMS (Compact Muon Solenoid) and LHCb (b-quark production and CP-violation) at the LHC (Large Hadron Collider) at CERN, - ALICE - experiment to study the heavy ion interactions at the LHC, - COMPASS (Compact Muon and Proton Apparatus for Structure and Spectroscopy) at the SPS at CERN, - WASA-Promice - a new version of the WASA detector at CELSIUS in Uppsala, - relativistic hyperfragment production experiment in Dubna, Russia. A small mechanical workshop is attached to our Department. It is involved in the preparation of the COMPASS experiment and participated in the construction of the WASA - Promice

  16. Department of High Energy Physics: Overview

    International Nuclear Information System (INIS)

    Bialkowska, H.

    2001-01-01

    Full text:The activities of the Department of High Energy Physics are centered around experiments performed at accelerators in the following laboratories: At CERN, the European Laboratory for Particle Physics in Geneva, Switzerland: - DELPHI at LEP e + e - storage ring is concerned mainly with the tests of the Standard Model, b-quark physics, gamma-gamma interactions and search for Higgs boson and supersymmetric particles; - NA48 - studies of the CP-violation and rare K 0 decays; - SMC - Spin Muon Collaboration is investigating the spin dependent nucleon structure functions and the gluon role in the nucleon spin; - NA49 and WA98 deal with heavy ion physics looking for possible effects of the phase transition in the quark-gluon plasma state. At CELSIUS Storage Ring in Uppsala, Sweden: - WASA - a precise study of near threshold production of light mesons, and their decays. At DESY in Hamburg, Germany: - ZEUS - deep inelastic scattering of electrons and protons, proton structure functions, diffractive photon-proton interactions. The groups of our Department participated in the construction phase of the experiments, both in hardware and in development of the software used in data analysis. Presently they take part in the data collection, detector performance supervision and data analysis. The Department is also actively involved in the preparation of new experiments: - CMS (Compact Muon Solenoid) and LHCb (b-quark production and CP-violation) at the LHC (Large Hadron Collider) at CERN; - ALICE - experiment to study the heavy ion interactions at the LHC; - COMPASS (Compact Muon and Proton Apparatus for Structure and Spectroscopy) at the SPS at CERN; - WASA- 4π - commissioning of a new version of the WASA detector at CELSIUS in Uppsala; - study of charge exchange processes in d-p collisions at Nuclotron in Dubna. A small mechanical workshop is attached to our Department. It is involved in the preparation of the COMPASS experiment and participated in the construction of

  17. Department of Accelerator Physics and Technology: Overview

    International Nuclear Information System (INIS)

    Plawski, E.

    2003-01-01

    Full text: The main activities of the Accelerator Physics and Technology Department were focused on following subjects: - contribution to development and building of New Therapeutical Electron Accelerator delivering the photon beams of 6 and 15 MeV, - study of the photon and electron spectra of narrow photon beams with the use of the BEAM/EGSnrc codes, - design and construction of special RF structures for use in CLIC Test Facility in CERN, - design and construction of 1:1 copper, room temperature models of accelerating superconducting 1.3 GHz structures for TESLA Project in DESY. In spite of drastic reduction of scientific and technical staff (from 16 to 10 persons) the planned works were successfully completed, but requested some extraordinary efforts. In realisation of 6/15 MeV Accelerator Project, the Department was responsible all along the project for calculations of all most important parts (electron gun, accelerating structure, beam focusing, achromatic deviation) and also for construction and physical modelling of some strategic subassemblies. The results of scientific and technical achievements of our Department in this work are documented in the Annex to Final Report on realisation of KBN Scientific Project No PBZ 009-13 and earlier Annual Reports 2000 and 2001. The results of Monte Carlo calculations of narrow photon beams and experimental verification using Varian Clinac 2003CD, Simens Mevatron and CGR MeV Saturn accelerators ended up with PhD thesis prepared by MSc Anna Wysocka. Her thesis: Collimation and Dosimetry of X-ray Beams for Stereotactic Radiotherapy with Linear Accelerators was sponsored by KBN scientific Project Nr T11E 04121. In collaboration with LNF INFN Frascati the electron beam deflectors were designed for CERN CLIC Test Facility CTF3. These special type travelling wave RF structures were built by our Department and are actually operated in CTF3 experiment. As the result of collaboration with TESLA-FEL Project in DESY, the set of RF

  18. Sustainable construction: construction and demolition waste reconsidered.

    Science.gov (United States)

    del Río Merino, Mercedes; Izquierdo Gracia, Pilar; Weis Azevedo, Isabel Salto

    2010-02-01

    Construction activity in Europe has increased substantially in the past decade. Likewise, there has also been a commensurate rise in the generation of construction and demolition waste (C&DW). This, together with the fact that in many European countries the rate of recycling and reuse of C&DW is still quite low has engendered a serious environmental problem and a motivation to develop strategies and management plans to solve it. Due to its composition, there is a significant potential to reuse and/or recycle C&DW, and thereby, contribute to improving the sustainability of construction and development, but practical procedures are not yet widely known or practiced in the construction industry. This article (a) summarizes the different applications that are presently practiced to optimize the recovery and/or application of C&DW for reuse, and (b) proposes various measures and strategies to improve the processing of this waste. The authors suggest that to enhance environmental effectiveness, a conscious and comprehensive C&DW management plan should be implemented in each jurisdiction. More precisely, this study presents a holistic approach towards C&DW management, through which environmental benefits can be achieved through the application of new construction methods that can contribute to sustainable growth.

  19. TPX tokamak construction management

    International Nuclear Information System (INIS)

    Knutson, D.; Kungl, D.; Seidel, P.; Halfast, C.

    1995-01-01

    A construction management contract normally involves the acquisition of a construction management firm to assist in the design, planning, budget conformance, and coordination of the construction effort. In addition the construction management firm acts as an agent in the awarding of lower tier contracts. The TPX Tokamak Construction Management (TCM) approach differs in that the construction management firm is also directly responsible for the assembly and installation of the tokamak including the design and fabrication of all tooling required for assembly. The Systems Integration Support (SIS) contractor is responsible for the architect-engineering design of ancillary systems, such as heating and cooling, buildings, modifications and site improvements, and a variety of electrical requirements, including switchyards and >4kV power distribution. The TCM will be responsible for the procurement of materials and the installation of the ancillary systems, which can either be performed directly by the TCM or subcontracted to a lower tier subcontractor. Assurance that the TPX tokamak is properly assembled and ready for operation when turned over to the operations team is the primary focus of the construction management effort. To accomplish this a disciplined constructability program will be instituted. The constructability effort will involve the effective and timely integration of construction expertise into the planning, component design, and field operations. Although individual component design groups will provide liaison during the machine assembly operations, the construction management team is responsible for assembly

  20. Towards green construction

    International Nuclear Information System (INIS)

    Bajracharya, Bijaya B.; Shrestha, Prasanna M.

    2000-01-01

    Sustainability is the key to any development works. In the operation phase, hydro power is the most sustainable form of energy. However construction activities for the same power station are usually far from being green. The popular myth is that construction activity converts green into grey. Despite this popular myth, construction of a hydro power project in Nepal has made the project area greener than earlier during the construction phase itself. Choice of construction technology, appropriate level of environmental impact assessment, monitoring of environmental parameters along side the construction progress followed by mitigation at the right time; launching community development programmes side by side, having environmental specification in contractual documents and self-reliance to fulfill environmental obligations by contractors itself are the key factors in the environmental management within the construction activities. The main conclusions in the paper is the need to change the way to think about the project constraints

  1. How engineering facilitates construction

    International Nuclear Information System (INIS)

    Bailey, D.T.

    1976-01-01

    During a recent survey, construction personnel at jobsites were asked, ''what are the ten most unwanted construction problems.'' One reoccurring answer was design/construction incompatibility. In fact, many designs were impractical from a construction point of view. The reasons for this problem can be identified: Once construction begins, engineering is under intense pressure to issue new drawings to allow work to progress according to schedule. Other reasons may be the relative inexperience of the design personnel in construction, changes in design criteria and delays in receipt of supplier or client information. A description is presented of ways to solve this problem by obtaining construction expertise and input into the various phases and products of the engineering work

  2. Division of Mechanical Construction - Overview

    International Nuclear Information System (INIS)

    Halik, J.

    1999-01-01

    The Department of Mechanical Construction consists of the Design Group and the Mechanical Workshop. The activity of the Department includes the following: designs of devices and equipment for experiments in physics and their mechanical construction and assembly, particularly vacuum chambers and installations for HV and UHV; maintenance and upgrading of the existing installations and equipment in our Institute; participation of our engineers and technicians in design works, equipment assembly and maintenance for experiments in foreign laboratories. The Design Group is equipped with PC-computers and AutoCad graphic software (release 12 and 13) what allows to make drawings and a mechanical documentation which meets world standards. Also ANSYS (version 5.2) - a software for mechanical, heat and magnetic calculations using finite-elements methods is used in our design activity. The Mechanical Workshop can offer a wide range of machining and treatment methods with satisfactory tolerances and surface quality. In 1998 the Department of Mechanical Construction designed, manufactured and assembled an equipment for the following foreign laboratories: Deutches Elektronen Synchrotron, Hamburg, FRG; Jagiellonian University, Cracow; Massachusetts Institute of Technology, Cambridge, Massachusetts, USA; University of Rochester. Rochester, NY, USA; Brookhaven National Laboratory, Upton, NY, USA. Besides the large designs and systems described below, some interesting works have been made for the departments of our Institute and other institutions: 1. The works for Cyclotron Section: The assembly of dipole magnet for extraction the cyclotron beam: - design and manufacturing of technological device for winding magnet coils; - winding of 16 coils; - manufacturing and assembly of magnet collars driving system; - design and manufacturing of vacuum chamber placed inside the magnet; - manufacturing of magnet cooling system; assembly of remachined magnet yoke and mentioned above units

  3. Department

    African Journals Online (AJOL)

    USER

    2016-01-13

    Jan 13, 2016 ... component was developed as the backend with a front end developed using VB. ... The system proved that with user oriented GIS system it is possible to develop tools that can ..... as the graphical user interface (GUI) where.

  4. Department

    African Journals Online (AJOL)

    USER

    2017-05-25

    May 25, 2017 ... 15), frequent contact with extension agents (2.183) and access to training (2.083) had high propensity to .... Methodology. Sampling Technique .... Perception. Biosecurity Principles. Weighted score. Weighted. Mean. Remark.

  5. Depart

    African Journals Online (AJOL)

    USER

    2016-05-06

    May 6, 2016 ... examine the adaptation to water resource including water for domestic use, agricultural use, and ... the climate system (internal variability), or variations in ... as well as the duration and impact of such variability ... release of greenhouse gases are the major .... In areas of high altitudes (Jos plateau. (606m).

  6. Department

    African Journals Online (AJOL)

    USER

    2016-01-13

    Jan 13, 2016 ... The quality of planning and decision making in the ... Geographic Information Systems (GIS) tools and support systems should ... Techniques such as buffering were incorporated in the system to allow users to .... Water points.

  7. Depart

    African Journals Online (AJOL)

    USER

    2017-01-26

    Jan 26, 2017 ... Hence, informal automobile workshops can spring up beside, behind or within any ... The study therefore, recommends the establishment of mechanic complex, organization and .... roads to catch the next available customers ...

  8. Department

    African Journals Online (AJOL)

    USER

    2014-09-08

    Sep 8, 2014 ... Ethiopian Journal of Environmental Studies & Management 7(5): 572 – 580, 2014. ISSN:1998-0507 ... during the slack period of rain-fed agriculture. In spite of the ... be as a result of fact that operation of the irrigation farming ...

  9. Improving the instructional leadership of heads of department in ...

    African Journals Online (AJOL)

    According to policy, heads of department (HODs) are best placed to offer such leadership, but in many schools this is not happening. We explain how we engaged HODs in one such school in a participatory action research process, to help them construct a framework for improving their instructional leadership. Qualitative ...

  10. Department of Theoretical Physics - Overview

    International Nuclear Information System (INIS)

    Kwiecinski, J.

    2002-01-01

    Full text: Research activity of the Department of Theoretical Physics concerns theoretical high energy and elementary particle physics, intermediate energy particle physics, theoretical nuclear physics, theory of nuclear matter, theory of quark-gluon plasma and of relativistic heavy ion collisions, theoretical astrophysics and general physics. There is some emphasis on the phenomenological applications of the theoretical research yet the more formal problems are also considered. The detailed summary of the research projects and of the results obtained in various fields is given in the abstracts. Our Department successfully collaborates with other Departments of the Institute as well as with several scientific institutions both in Poland and abroad. In particular, members of our Department participate in the EC network which allows for the mobility of researchers. Several members of our Department have also participated in the research projects funded by the State Committee for Scientific Research. Besides pure research, members of our Department are also involved in graduate and undergraduate teaching activity both at our Institute and at other academic institutions in Cracow. At present, eight students are working towards their Ph.D. degrees under the supervision of senior members of the Department. (author)

  11. Department of Theoretical Physics - Overview

    International Nuclear Information System (INIS)

    Kwiecinski, J.

    2001-01-01

    Full text: Research activity of the Department of Theoretical Physics concerns theoretical high-energy and elementary particle physics, intermediate energy particle physics, theoretical nuclear physics, theory of nuclear matter, theory of quark-gluon plasma and relativistic heavy-ion collisions, theoretical astrophysics and general physics. There is some emphasis on the phenomenological applications of the theoretical research yet more formal problems are also considered. A detailed summary of the research projects and of the results obtained in various field is given in the abstracts. Our Department actively collaborates with other Departments of the Institute as well as with several scientific institutions both in Poland and abroad. In particular, members of our Department participate in the EC network, which stimulates the mobility of researchers. Several members of our Department also participated in the research projects funded by the Polish Committee for Scientific Research (KBN). Besides pure research, members of our Department are also involved in graduate and up graduate teaching activity at our Institute as well as at other academic institution in Cracow. At present nine students are working on their Ph.D. degrees under the supervision of senior members of the Department. (author)

  12. Department of Accelerator Physics and Technology: Overview

    International Nuclear Information System (INIS)

    Plawski, E.

    2004-01-01

    Full text: Due to the drastic reduction (in previous years) of scientific and technical staff of the Department, our basic work in 2003 was limited to the following subjects: - the development of radiographic 4 MeV electron accelerator, - computational verification of basic parameters of a simplified version of ''6/15 MeV'' medical accelerator. - continuation of the study of photon and electron spectra of narrow photon beams with the use of the BEAMnrc Monte Carlo codes, - a study of accelerating and deflecting travelling wave RF structures based on experience already gained. The small 4-6 MeV electron linac was constructed in the Department as a tool for radiographic services which may be offered by our Institute. In 2003, the most important sub-units of the accelerator were constructed and completed. Accelerated electron beam intensity up to 80 mA was already obtained and for the following year the energy spectrum measurement, energy and intensity optimisation for e - /X-ray conversion and also first exposures are planned. Because in the realisation of the 6/15 MeV Accelerator Project, the Department was responsible for calculations of beam guiding and acceleration (accelerating section with triode electron gun, beam focusing, achromatic deviation), last year some verifying computations were done. This concerned mainly the influence of the variation of gun injection energy and RF frequency shifts on beam dynamics. The computational codes written in the Department are still used and continuously developed for this and similar purposes. The triode gun, originally thought as a part of 6/15 MeV medical accelerator, is on long term testing, showing very good performance; a new pulse modulator for that sub-unit was designed. The Monte Carlo calculations of narrow photon beams are continued. Intensity modulated radiation therapy (IMRT) is expected to play a dominant role in the years to come. Our principal researcher hereafter receiving PhD degree collaborates on IMRT

  13. Department of Theoretical Physics - Overview

    International Nuclear Information System (INIS)

    Kwiecinski, J.

    1999-01-01

    Full text: Research activity of the Department of Theoretical Physics concerns theoretical high-energy and elementary particle physics, intermediate energy particle physics, theoretical nuclear physics, theory of nuclear matter, theory of quark-gluon plasma and of relativistic heavy-ion collisions, theoretical astrophysics and general physics. There is some emphasis on the phenomenological applications of the theoretical research yet the more formal problems are also considered. The detailed summary of the research projects and of the results obtained in various fields is given in the abstracts. Our Department actively collaborates with other Departments of the Institute as well as with several scientific institutions both in Poland and abroad. In particular members of our Department participate in the EC network which allows mobility of researchers. Several members of our Department have also participated in the research projects funded by the Polish Committee for Scientific Research (KBN). The complete list of grants is listed separately. Besides pure research, members of our Department are also involved in graduate and undergraduate teaching activity both at our Institute as well as at other academic institutions in Cracow. At present five PhD students are working for their degree under supervision of the senior members from the Department. In the last year we have completed our active participation in the educational TEMPUS programme funded by the European Communities. This programme has in particular allowed exchange of students between our Department and the Department of Physics of the University of Durham in the United Kingdom. In 1998 we joined the SOCRATES - ERASMUS project which will make it possible to continue this exchange. (author)

  14. Construction time of PWRs

    International Nuclear Information System (INIS)

    Moreira, João M.L.; Gallinaro, Bruno; Carajilescov, Pedro

    2013-01-01

    The construction time of PWRs is studied considering published data about nuclear power plants in the world. For the 268 PWRs in operation in 2010, the mode of the construction time distribution is around 5–6 years, and 80% of the plants were built in less than 120 months. To circumvent the problem of comparing plants with different size we normalized the construction time to plants with 1 GW. We restricted the analysis to 201 PWRs which suffered less from external factors that were beyond the control of the management from 1965 to 2010. The results showed that the normalized construction time did not increase over the years and nor with the plants’ gross power level. The learning rate of the industry regarding normalized construction times showed a reduction with 95% confidence level of about 0.56±0.07 months for each 10 GW of installed capacity. Over the years the normalized construction time decreased and became more predictable. The data showed that countries with more centralized regulatory, construction and operation environments were able to build PWRs in shorter times. Countries less experienced with the nuclear technology built PWRs in longer times. - Highlights: ► The construction time of PWRs is analyzed based on historical data. ► Different factors affecting construction time are considered in the analyses. ► The normalized construction time of PWRs decreased with time and gross power level. ► Countries with more centralized institutions built PWRs more quickly

  15. Annual report 1987 Materials Department

    International Nuclear Information System (INIS)

    1989-01-01

    Review of the activities performed by the Materials Department of the National Atomica Energy Commission of the Argentine Republic during the year 1987. The Department provides services and assistance in all matters related to metallography and special techniques, corrosion and materials' transport, transport phenomena, casting and solidification, damage by radiation, thermomechanical treatments, mechanical properties, fatigue and fracture, multinational project of research and development in materials, VII course on metallurgy and technology of materials. Likewise, information on the Materials Department's staff, its publications, projects and agreements, seminars, courses and conferences during 1987 is included [es

  16. Density measurement verification for hot mix asphalt concrete pavement construction.

    Science.gov (United States)

    2010-06-01

    Oregon Department of Transportation (ODOT) requires a minimum density for the construction of dense-graded hot mix asphalt concrete (HMAC) pavements to ensure the likelihood that the pavement will not experience distresses that reduce the expected se...

  17. Density measurement verification for hot mixed asphalt concrete pavement construction.

    Science.gov (United States)

    2010-06-01

    Oregon Department of Transportation (ODOT) requires a minimum density for the construction of dense-graded hot mix asphalt concrete (HMAC) pavements to ensure the likelihood that the pavement will not experience distresses that reduce the expected se...

  18. Iowa task report : US 18 concrete overlay construction under traffic.

    Science.gov (United States)

    2012-05-01

    The National Concrete Pavement Technology Center, Iowa Department of Transportation, and Federal Highway Administration set out to demonstrate and document the design and construction of portland cement concrete (PCC) overlays on two-lane roadways wh...

  19. Cost Indexing and Unit Price Adjustments for Construction Materials

    Science.gov (United States)

    2012-10-30

    This project was focused on the assimilation of information regarding unit price adjustment clauses, or PACs, : that are offered for construction materials at the state Departments of Transportation (DOTs). It is intended to : provide the South Carol...

  20. Constructing Student Problems in Phylogenetic Tree Construction.

    Science.gov (United States)

    Brewer, Steven D.

    Evolution is often equated with natural selection and is taught from a primarily functional perspective while comparative and historical approaches, which are critical for developing an appreciation of the power of evolutionary theory, are often neglected. This report describes a study of expert problem-solving in phylogenetic tree construction.…

  1. Department of Nuclear Reactions - Overview

    International Nuclear Information System (INIS)

    Budzanowski, A.

    1999-01-01

    Full text: The year 1998 can be considered as very successful both in harvesting important results from the existing collaborations as well as establishing new ones. In the frame of the COSY-11 collaboration cross section for η' production in p-p collision close to the threshold has been measured. In the region of excess energy between 1.5 and 4.1 MeV the η' cross sections are much lower than those of the π 0 and η production. There seems to be no indication that N * resonance doorway-like state governs the reaction mechanisms. The determined coupling constant g η'pp appears to be consistent with the prediction of the simple quark model. Results were published in Phys. Rev. Letters. Using the GEM detector, investigations of the isospin symmetry breaking were performed. Two reactions channels 3 Heπ 0 and 3 Hπ + from the reaction at proton momenta 700, 767, and 825 MeV/c were measured. Data analysis is in progress. The model of the meson cloud in the nucleon which is a speciality of our department has been successfully applied to explain the leading proton and neutron cross sections from the e + or e - proton collisions at the HERA ring. General formulas to calculate polarization of the particles with spin transmitted through the barrier in the presence of strong magnetic fields were obtained. New collaboration between our laboratory and the Institute for Nuclear Research in Kiev has been established. One PhD thesis was completed in the frame of this collaboration. We joined the new collaboration with Lund University concerning studies of hot nuclear matter properties using heavy ions from CELSIUS ring. First test of the phoswich detector for the forward wall was performed in Uppsala. Isoscalar giant dipole resonance strength distribution 3 ℎω has been evaluated in 208 Pb in the space of 1p1h and 2p2h excitation. The centroid energy of this state can directly be related to the nuclear incompressibility module. Our result indicates rather large values of

  2. Department of Geography and Environment

    African Journals Online (AJOL)

    USER

    2017-01-30

    Accepted: January 30, 2017. Department of ... and people living around the illegal dump-sites. Kubwa-Abu a area has three ... inherent water content of waste themselves which serves as an ..... Natural Radioactivity in Soil,. Vegetation, and ...

  3. Physics department annual progress report

    International Nuclear Information System (INIS)

    Moeller, H.B.; Lebech, B.

    1980-12-01

    Research in the Physics Department at Risoe covers three main fields: solid-state physics, plasma physics, and meteorology. The principal activities in these fields are presented for the period from 1 January to 31 December 1980. (Auth.)

  4. Department of Psychology, Obafemi Awolo

    African Journals Online (AJOL)

    USER

    2014-11-05

    Accepted: November 05, 2014. Department of Psychology, Obafemi Awolowo University, Ile-Ife, Nigeria ... place attachment, a strong internal locus of control and strong and accessible ..... Scale for Turkish University students. Journal of ...

  5. Mechanical Engineering Department technical abstracts

    International Nuclear Information System (INIS)

    1984-01-01

    The Mechanical Engineering Department publishes abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). General information about the current role and activities of each of the Department's seven divisions precedes the technical abstracts. Further information about a division's work may be obtained from the division leader, whose name is given at the end of each divisional summary. The Department's seven divisions are as follows: Nuclear Test Engineering Division, Nuclear Explosives Engineering Division, Weapons Engineering Division, Energy Systems Engineering Division, Engineering Sciences Division, Magnetic Fusion Engineering Division and Materials Fabrication Division

  6. Electronics Department. Progress Report 1984

    DEFF Research Database (Denmark)

    Risø National Laboratory, Roskilde

    This report summarizes the activities in the Electronics Department in 1984. These include work under the headings of informatics, applied laser physics, nuclear geophysics, instrumentation and measuring techniques, and instrumentation consulting, registration and maintenance for the Danish...

  7. Creating a Virtual Physics Department.

    Science.gov (United States)

    Suson, Daniel J.; Hewett, Lionel D.; McCoy, Jim; Nelson, Vaughn

    1999-01-01

    Describes a solution to alleviate the low numbers of students graduating from the majority of physics programs throughout the nation. Discusses the outcome of a virtual physics department. (Author/CCM)

  8. Mechanical Engineering Department Technical Review

    International Nuclear Information System (INIS)

    Carr, R.B.; Denney, R.M.

    1981-01-01

    The Mechanical Engineering Department Technical Review is published to inform readers of various technical activities within the Department, promote exchange of ideas, and give credit to personnel who are achieving the results. The report is presented in two parts: technical achievements and publication abstracts. The first is divided into seven sections, each of which reports on an engineering division and its specific activities related to nuclear tests, nuclear explosives, weapons, energy systems, engineering sciences, magnetic fusion, and materials fabrication

  9. [Outsourcing of clinical laboratory department].

    Science.gov (United States)

    Murai, T

    2000-03-01

    Recently, to improve financial difficulties at various hospitals, outsourcing of the laboratory department is be coming more wide spread. At the department of clinical pathology of St. Luke's International Hospital, the system, so called, "Branch labo" which is one of the outsourcing laboratory conditions, was adopted in March 1999. In this reports. We described the decision procedure for accepting the situation and the circumstances of operation.

  10. Professional entrepreneurial identity construction

    DEFF Research Database (Denmark)

    Ramsgaard, Michael Breum

    The present study investigates the construction of a professional identity as an entrepreneur in a sample of people with educational background in nutrition and health. The study examines the connection between professional identity construction and entrepreneurial business emergence using...... ‘entrepreneurial preparedness’ as parameter. This research seeks to address the following questions: What significant components or characteristics do entrepreneurs rely on in the early processes of constructing an entrepreneurial identity....

  11. Imperfect construction of microclusters

    Science.gov (United States)

    Schneider, E.; Zhou, K.; Gilbert, G.; Weinstein, Y. S.

    2014-01-01

    Microclusters are the basic building blocks used to construct cluster states capable of supporting fault-tolerant quantum computation. In this paper, we explore the consequences of errors on microcluster construction using two error models. To quantify the effect of the errors we calculate the fidelity of the constructed microclusters and the fidelity with which two such microclusters can be fused together. Such simulations are vital for gauging the capability of an experimental system to achieve fault tolerance.

  12. VE of construction industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1987-10-15

    This book gives descriptions of basic of VE of construction industry including doing away with mannerism, necessity of cost reduction, management method of cost reduction, thinking of idea, target of VE, starting VE activity, technical method of VE of construction industry such as thinking of idea with brainstorming, function trade method, new brainstorming, MM method, morphology analysis and lateral thinking, cases of VE of construction industry.

  13. VE of construction industry

    International Nuclear Information System (INIS)

    1987-10-01

    This book gives descriptions of basic of VE of construction industry including doing away with mannerism, necessity of cost reduction, management method of cost reduction, thinking of idea, target of VE, starting VE activity, technical method of VE of construction industry such as thinking of idea with brainstorming, function trade method, new brainstorming, MM method, morphology analysis and lateral thinking, cases of VE of construction industry.

  14. HITACHI construction CAE system

    International Nuclear Information System (INIS)

    Yoshida, M.

    1994-01-01

    Construction and maintenance of nuclear power plants have important problems such as shortening the construction period and reducing the construction cost. Recently, the problem of insufficient construction labor has arisen, and as drastic strategic development has become a necessary counter-measure. The following four principles are included in the measures to be taken for efficient execution of the construction work within the short construction period: (1) reduction of on-site work and expansion of module block making, (2)improvement of the accuracy of the on-site work process, adjustment and expansion of the work in parallel with the construction process, (3)improvement of efficiency of the on-site work and mechanization and automation of the work, (4)improvement of the accuracy of the management of the construction. A three dimensional simulation system plant construction plan CAE, comprising five modules has been developed. A project management system was also developed to improve the accuracy and efficiency of management work in the field

  15. Decision Support Tool for Nighttime Construction and Air Quality - User’s Guide

    Science.gov (United States)

    2017-11-01

    The Texas Department of Transportation (TxDOT) Research Project 0-6864 Investigate the Air Quality Benefits of Nighttime Construction in Non-attainment Counties investigated the potential air quality benefits of shifting construction/maintenance acti...

  16. Departments as Agents of Change

    Science.gov (United States)

    Lagowski, J. J.

    1996-07-01

    Higher education is changing because it has no choice. And, for the most part, outside influences are dictating the processes of change. The more fortunate institutions have had a flat budget during this period, but most have been forced to deal with a declining revenue stream as well. Legislators seem bent on micromanaging state-supported institutions, even as they cut their support. Regulators demand greater institutional accountability. Students and their parents expect more service at lower prices and increased flexibility. Technological advances have dramatically affected the availability and accessibility of extant knowledge. It is no longer a question of whether institutions will change, but rather, who will control the change. Most institutions possess long-standing academic traditions, but these are placed at risk in an increasingly competitive market that holds little sympathy for such traditions and may even see them as obstacles or barriers. As a result, the change agents will undoubtedly have a profound effect on the very nature of academic institutions. From the academic point of view, it would seem prudent to attempt to manage the changes that will inevitably occur. A number of concerned observers, notably the Pew Higher Education Roundtable and the American Association for Higher Education, argue persuasively that the academic department is the logical focus for responding to the current winds of change. Using a marketing metaphor, the academic department has been likened to a "producers' cooperative" of services that consumers seek. Thus, the department should be held accountable for the quality of teaching delivered by its members, for the coherence of its major, for its contributions to the general education curriculum, and for supervising and rewarding its individual faculty members. If departments are to be held accountable, it is surely in their best interest to act in such a way that they are accountable. Expecting academic departments to be

  17. Department of Thermonuclear Research annual report 1990

    Energy Technology Data Exchange (ETDEWEB)

    Sadowski, M [ed.

    1991-03-01

    Department of Thermonuclear Research Annual Report 1990 presents the most important results of theoretical, experimental, and technological studies, carried out within a framework of two programs: Diagnostics of High-Temperature Plasma (CPBP 01.10) and Nuclear Technology (CPBR 5.8). Theoretical studies of tokamak edge plasmas, charged particle motions, strong refraction effects, current pulse generators, classical models of atomic collisions, and electron mechanisms of the Coulomb barrier tunneling, are shortly summarized. Experimental studies of X-ray, ion, and proton emission from the RPI-type devices, as well as optimization tests and electron beam measurements at the PF-type facilities, are described. Technological studies of opto-electronic transmission systems, modifications of diagnostic equipment, design and construction of new PF facilities, as well as applications of the IONOTRON-type devices, are also presented. (author). 56 refs, 20 figs.

  18. Department of Thermonuclear Research annual report 1990

    International Nuclear Information System (INIS)

    Sadowski, M.

    1991-03-01

    Department of Thermonuclear Research Annual Report 1990 presents the most important results of theoretical, experimental, and technological studies, carried out within a framework of two programs: Diagnostics of High-Temperature Plasma (CPBP 01.10) and Nuclear Technology (CPBR 5.8). Theoretical studies of tokamak edge plasmas, charged particle motions, strong refraction effects, current pulse generators, classical models of atomic collisions, and electron mechanisms of the Coulomb barrier tunneling, are shortly summarized. Experimental studies of X-ray, ion, and proton emission from the RPI-type devices, as well as optimization tests and electron beam measurements at the PF-type facilities, are described. Technological studies of opto-electronic transmission systems, modifications of diagnostic equipment, design and construction of new PF facilities, as well as applications of the IONOTRON-type devices, are also presented. (author). 56 refs, 20 figs

  19. Secondary School Department Chairs Leading Successful Change

    Directory of Open Access Journals (Sweden)

    Julie Ann Gaubatz

    2015-12-01

    Full Text Available A foundational understanding within education leadership literature is that education leaders are expected to guide reform efforts within school. This expectation mirrors organizational development literature that describes leaders as individuals who constructively institute change within their organizations. Although leadership and change are portrayed as codependent, no scholarship has linked change models with leadership theories. This article describes a multiple case study that explored the relationship between leadership behaviors and the change process through secondary school department chair stories of change. From this analysis, a clearer picture emerged that illustrates how leaders with little control over decisions implement change. Findings included distinct connections between CREATER change process stages and the Leadership Grid. Suggestions as to how education leaders should approach change attempts within their schools are discussed.

  20. Military Construction, Military Quality of Life and Veterans Affairs: FY2007 Appropriations

    National Research Council Canada - National Science Library

    Else, Daniel H; Scott, Christine; Panangala, Sidath V

    2007-01-01

    ... construction, military housing allowances, military installation maintenance and operation, the Department of Veterans Affairs, and other veteran-related agencies, rested in the House Committee...

  1. 9 CFR 108.8 - Construction of buildings.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Construction of buildings. 108.8 Section 108.8 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF... LICENSED ESTABLISHMENTS § 108.8 Construction of buildings. (a) The floors, walls, ceilings, partitions...

  2. INDOT Construction Inspection Priorities : Appendix B Survey Instrument

    Science.gov (United States)

    2012-05-01

    In the last decade, the Indiana Department of Transportation (INDOT) has experienced an increase in their construction projects (e.g., INDOTs construction spending was $789 million in 2006 and increased to $1,081.4 million in 2010); while the leve...

  3. 19 CFR 146.61 - Constructive transfer to Customs territory.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Constructive transfer to Customs territory. 146.61 Section 146.61 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... Constructive transfer to Customs territory. The port director shall accept receipt of any entry in proper form...

  4. Wall Construction; Carpentry: 901892.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    The curriculum guide outlines a course designed to provide instruction in floor and wall layout, and in the diverse methods and construction of walls. Upon completion of this course the students should have acquired a knowledge of construction plans and structural foundations in addition to a basic knowledge of mathematics. The course consists of…

  5. Safety in construction?

    NARCIS (Netherlands)

    Swuste, P.H.J.J.

    2013-01-01

    The available literature on Construction Safety is not very optimistic about the chances of evidence-based safety in the construction industry exerting a positive influence. Many articles indicate that the structures and processes that are designed to ensure safety in the industry are poor. Safety

  6. Employment and winter construction

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan de Place; Larsen, Jacob Norvig

    2011-01-01

    Reduced seasonal building activity in the construction sector is often assumed to be related to hard winter conditions for building activities and poor working conditions for construction workers, resulting in higher costs and poor quality of building products, particularly in the northern hemisp...... of contracts for workers is more likely to explain differences in seasonal activity than climatic or technological factors....

  7. Human Resource Construction

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Centering on strategic objective of reform and development,CIAE formulated its objectives in human resource construction for the 13th Five-year Plan period,and achieved new apparent progress in human resource construction in 2015.1 Implementation of"LONGMA Project"

  8. Governmentalities of Construction

    DEFF Research Database (Denmark)

    Gottlieb, Stefan; Jensen, Jens Stissing

    2016-01-01

    In this paper, we apply Foucault’s concept of governmentality in a dual analysis of the formation and transformation of the construction sector and the construction worker. The governmentality concept is well-suited for such an analysis as it directs attention to the ways in which control is the ...

  9. Nuclear reactor constructions

    International Nuclear Information System (INIS)

    Baddley, A.H.

    1981-01-01

    A method of constructing a radiation shielding plug for use in the roof of the coolant containment vault of liquid metal cooled fast breeder reactors is described. The construction allows relative movement of that part of service cables and pipes which are carried by the fixed roof and that part which is carried by the rotatable plug. (U.K.)

  10. Constructional and Conceptual Composition

    Science.gov (United States)

    Dodge, Ellen Kirsten

    2010-01-01

    Goldberg's (1995) recognition that, in addition to various word-level constructions, sentences also instantiate meaningful argument structure constructions enables a non-polysemy-based analysis of various verb 'alternations' (Levin 1993). In such an analysis, meaning variations associated with the use of the same verb in different argument…

  11. Personal Usability Constructs

    DEFF Research Database (Denmark)

    Hertzum, Morten; Clemmensen, Torkil; Hornbæk, Kasper

    2011-01-01

    Whereas the concept of usability is predominantly defined analytically, people relate to systems through personal usability constructs. Based on 48 repertory-grid interviews, this study investigates how such personal constructs are affected by two factors crucial to the international development...

  12. Industrialization for sustainable construction?

    NARCIS (Netherlands)

    Egmond - de Wilde De Ligny, van E.L.C.; Barrett, P; Amaratunga, D.; Haigh, R; Keraminiyage, K.; Pathirage, C

    2010-01-01

    Sustainable construction (SuCo), which genesis dates in the early 1990’s, advocates the creation and operation of a quality and healthy built environment based on resource efficiency, life cycle economics and ecological principles. (Kibert, 2003). Currently the Construction Industry does not meet

  13. Operations management for construction

    CERN Document Server

    March, Chris

    2009-01-01

    Students studying construction management and related subjects need to have a broad understanding of the major aspects of controlling the building processes. Operations Management for Construction is one of three textbooks (Business Organisation, Operations Management and Finance Control) written to systematically cover the field. Focusing on construction sites and operations which are challenging to run, Chris March explores issues such as the setting up of the site, the deciding of the methodology of construction, and the sequence of work and resourcing. As changing and increasing regulations affect the way sites are managed, he also considers the issues and methods of successful administering, safety, quality and environment. Finally, the contractor's responsibility to the environment, including relationships with third parties, selection of materials, waste management and sustainability is discussed. Chris March has a wealth of practical experience in the construction industry, as well as considerable exp...

  14. VENTILATION NEEDS DURING CONSTRUCTION

    International Nuclear Information System (INIS)

    C.R. Gorrell

    1998-01-01

    The purpose of this analysis is to determine ventilation needs during construction and development of the subsurface repository and develop systems to satisfy those needs. For this analysis, construction is defined as pre-emplacement excavation and development is excavation that takes place simultaneously with emplacement. The three options presented in the ''Overall Development and Emplacement Ventilation Systems'' analysis (Reference 5.5) for development ventilation will be applied to construction ventilation in this analysis as well as adding new and updated ventilation factors to each option for both construction and development. The objective of this analysis is to develop a preferred ventilation system to support License Application Design. The scope of this analysis includes: (1) Description of ventilation conditions; (2) Ventilation factors (fire hazards, dust control, construction logistics, and monitoring and control systems); (3) Local ventilation alternatives; (4) Global ventilation options; and (5) Evaluation of options

  15. 1988 Progress report of the EDF department for the analysis of experimental data and measurements

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    The 1988 activity report of the department for the analysis of experimental data and measurements (Department of Retour d'Experience Mesures-Essais, of EDF, France), is presented. The mission of the department is to collect and investigate data from the nuclear power plant operations. The investigations started before 1988, were carried on in 1988. The department main activities are: technology and information transfer from experimental activities, the construction of a standard data acquisition and processing system, the actions involving the N4 turbine, and the modelling and construction of new non-destructive methods of control. The most important facts and activities carried out in 1988 are presented [fr

  16. Reactor Engineering Department annual report

    International Nuclear Information System (INIS)

    1993-09-01

    This report summarizes the research and development activities in the Department of Reactor Engineering during the fiscal year of 1992 (April 1, 1992-March 31, 1993). The major Department's programs promoted in the year are the assessment of the high conversion light water reactor, the design activities of advanced reactor system and development of a high energy proton linear accelerator for the engineering applications including TRU incineration. Other major tasks of the Department are various basic researches on the nuclear data and group constants, the developments of theoretical methods and codes, the reactor physics experiments and their analyses, fusion neutronics, radiation shielding, reactor instrumentation, reactor control/diagnosis, thermohydraulics and technology developments related to the reactor physics facilities. The cooperative works to JAERI's major projects such as the high temperature gas cooled reactor or the fusion reactor and to PNC's fast reactor project were also progressed. The activities of the Research Committee on Reactor Physics are also summarized. (author)

  17. Reactor engineering department annual report

    International Nuclear Information System (INIS)

    1990-09-01

    This report summarizes the research and development activities in the Department of Reactor Engineering during the fiscal year of 1989 (April 1, 1989 - March 31, 1990). One of major Department's programs is the assessment of the high conversion light water reactor and the design activities of advanced reactor system. Development of a high energy proton linear accelerator for the nuclear engineering including is also TRU incineration promoted. Other major tasks of the Department are various basic researches on nuclear data and group constants, theoretical methods and code development, on reactor physics experiments and analyses, fusion neutronics, radiation shielding, reactor instrumentation, reactor control/diagnosis, thermohydraulics, technology assessment of nuclear energy and technology developments related to the reactor physics facilities. The cooperative works to JAERI's major projects such as the high temperature gas cooled reactor or the fusion reactor and to PNC's fast reactor project also progressed. The activities of the Research Committee on Reactor Physics are also summarized. (author)

  18. Reactor Engineering Department annual report

    International Nuclear Information System (INIS)

    Matsuura, S.; Nakahara, Y.; Takano, H.

    1983-09-01

    Research and development activities in the Department of Reactor Engineering in fiscal 1982 are described. The work of the Department is closely related to development of multipurpose Very High Temperature Gas Cooled Reactor and Fusion Reactor, and development of Liquid Metal Fast Breeder Reactor carried out by Power Reactor and Nuclear Fuel Development Corporation. Since fiscal 1982, Systematic research and development work on safeguards technology has been added to the activities of the Department. Contents of the report are achievements in fields such as nuclear data and group constants, theoretical method and code development, integral experiment and analysis, fusion neutronics, shielding, reactor and nuclear instrumentation, reactor control and diagnosis, and safeguards technology, and activities of the Committee on Reactor Physics. (author)

  19. Department of Energy 1977--1994: A summary history

    Energy Technology Data Exchange (ETDEWEB)

    Fehner, T.R.; Holl, J.M.

    1994-11-01

    The Department of Energy Organization Act of 1977 created perhaps the most interesting and diverse agency in the Federal Government. The new department brought together for the first time not only most of the government`s energy programs but also defense responsibilities that included the design, construction, and testing of nuclear weapons. The Department of Energy incorporated a score of organizational entities from a dozen departments and agencies, each with its own history and traditions. Uniting these seemingly disparate entities and programs was a common commitment to performing first rate science and technology. The Department of Energy sought--and continues to seek--to be one of the Nation`s premier science and technology organizations. The Department of Energy, 1977--1994, is a summary history of the origins, goals, and achievements of the Department and selected major programs. Beginning with the various fuels policies on the energy side and the Manhattan project on the defense side, the study details how the Department was born of the energy crisis of the early and mid-1970s. The history then surveys the Department and its programs from the Carter through the Clinton administrations. As the energy crisis eased, the Department played a central role on issues as dissimilar as the Strategic Defense Initiative and the Superconducting Super Collider. With the end of the Cold War, the Department of Energy further transformed itself, moving from the building of bombs to partial dismantlement of the nuclear weapons complex and to an increased emphasis on environmental activities and technology transfer efforts.

  20. Reactor Engineering Department annual report

    International Nuclear Information System (INIS)

    1985-08-01

    Research and development activities in the Department of Reactor Engineering in fiscal 1984 are described. The work of the Department is closely related to development of multipurpose Very High Temperature Gas Cooled Reactor and Fusion Reactor, and development of Liquid Metal Fast Breeder Reactor carried out by Power Reactor and Nuclear Fuel Development Corporation. Contents of the report are achievements in fields such as nuclear data and group constants, theoretical method and code development, reactor physics experiment and analysis, fusion neutronics, shielding, reactor and nuclear instrumentation, reactor control and diagnosis, safeguards technology, and activities of the Committee on Reactor Physics. (author)

  1. Reactor Engineering Department annual report

    International Nuclear Information System (INIS)

    1984-08-01

    Research and development activities in the Department of Reactor Engineering in fiscal 1983 are described. The work of the Department is closely related to development of multipurpose Very High Temperature Gas Cooled Reactor and Fusion Reactor, and development of Liquid Metal Fast Breeder Reactor carried out by Power Reactor and Nuclear Fuel Development Corporation. Contents of the report are achievements in fields such as nuclear data and group constants, theoretical method and code development, integral experiment and analysis, fusion neutronics, shielding, reactor and nuclear instrumentation, reactor control and diagnosis, and safeguards technology, and activities of the Committee on Reactor Physics. (author)

  2. Emergency Department Management of Trauma

    DEFF Research Database (Denmark)

    MacKenzie, Colin; Lippert, Freddy

    1999-01-01

    services (EMS) response times and advanced prehospital care increase the number of critically injured patients surviving sufficiently long to reach a hospital “in extremis.” Both scenarios provide challenges in the management of traumatized patients. This article addresses the management of severely......Initial assessment and management of severely injured patients may occur in a specialized area of an emergency department or in a specialized area of a trauma center. The time from injury until definitive management is of essence for survival of life-threatening trauma. The initial care delivered...... injured patients after these patients reach a hospital emergency department or a trauma center....

  3. Budgeting in an imaging Department

    International Nuclear Information System (INIS)

    Nyalla, A. M.

    2006-01-01

    budgeting form an integral part of an imaging department. It is a plan to cope with necessary expenses in the future. It involves identifying the needs and income sources required to cover the needs.Covers specific items and time-usually a year and is expressed in monetary terms. The micro budget is put in the macro budget of the hospital. defines financial support for the department. Considers: a fiscal year, projection of patients, types of examinations, type of equipment, monetary exchange, and inflation rate

  4. Department of Chemistry, progress report

    International Nuclear Information System (INIS)

    1989-05-01

    The research activities in Department of Chemistry during the last 3 years from 1986 to 1988 were compiled. The researches and works of Department of Chemistry are mainly those concerned with important basic matters and items which are committed to the further development of the nuclear fuels and materials, to the establishment of the nuclear fuel cycle, and to the acquisition of data for the environmental safety studies. Intensive efforts were also made on chemical analysis service of various fuels and nuclear materials. (author)

  5. Annual Report 1984. Chemistry Department

    DEFF Research Database (Denmark)

    Funck, Jytte; Nielsen, Ole John

    This report contains a brief survey of the main activities in the Chemistry Department. All articles and reports published and lectures given in 1984 are presented. The facilities and equipment are mentioned briefly. The activities are divided into the following groups: radioisotope chemistry, an......, analytical- and organic chemistry, environmental chemistry, polymer chemistry, geochemistry and waste disposal, radical chemistry, positron annihilation, mineral processing, and general.......This report contains a brief survey of the main activities in the Chemistry Department. All articles and reports published and lectures given in 1984 are presented. The facilities and equipment are mentioned briefly. The activities are divided into the following groups: radioisotope chemistry...

  6. Department of Plasma Physics and Technology - Overview

    International Nuclear Information System (INIS)

    Sadowski, M.

    1997-01-01

    In 1996 the main activities of Department P-5 (until December 1996 known as the Department of Thermonuclear Research) were concentrated on 5 topics: 1. Selected problems of plasma theory, 2. Studies of phenomena within high-current plasma concentrators, 3. Development of plasma diagnostic methods, 4. Studies in the field of fusion technology, 5. Research on new plasma-ion technologies. Theoretical studies mainly concerned elementary processes occurring within a plasma, and particularly those within near-electrode regions of microwave discharges as well as those within near-wall layers (SOL) of tokamaks. We also developed computational packages for parameter identification and modelling of physical phenomena in pulse plasma coaxial accelerators. Experimental studies were concentrated on the generation of a dense magnetized plasma in different high-current PF (Plasma Focus) facilities and small Z-Pinch devices. We carried out investigations of X-rays, relativistic electron beams (REBs), accelerated primary ions, and fast products of fusion reactions for deuterium discharges. Research on plasma diagnostics comprised the development of methods and equipment for studies of X-ray emission, pulsed electron beams, and fast ions, using special Cherenkov-type detectors of electrons and solid-state nuclear track detectors (SSNTDs) of ions. New diagnostic techniques were developed. Studies in the field of fusion technology concerned the design, construction, and testing of different high-voltage pulse generators. We also developed special opto-electronic systems for control and data transmission. Research on plasma-ion technology concentrated on the generation of pulsed high-power plasma-ion streams and their applications for the surface modification of semiconductors, pure metals and alloys. The material engineering studies were carried out in close collaboration with our P-9 Department and other domestic and foreign research centers

  7. Construction in Occupied Spaces

    Directory of Open Access Journals (Sweden)

    Ward Andrew E.

    2017-06-01

    Full Text Available Conducting construction activities in occupied environments presents a great challenge due to the additional logistical requirements and the presence of the building occupants. The aim of this research is to gather and evaluate the means and methods to successfully plan, manage, and execute construction activities in occupied spaces in an effort to provide consolidated industry tools and strategies for maintaining a schedule and minimizing the impact on the occupants. The methodology of the research utilizes an exploratory approach to gather qualitative data. The data was collected through interviews with industry professionals to identify industry best practices. The semi-structured interviews provided a platform for the documents, lessons learned, and the techniques and strategies used for occupied construction by the construction industry. The information obtained in the interview process identified six themes that are critical to achieving and maintaining quality in occupied construction. These themes of the schedule, cost, customer satisfaction, planning, fire/life safety and utilities, and contractor management are reviewed in detail, and the paper discusses how to manage each element. The analysis and extracted management techniques, procedures and strategies can be used by the construction industry for future projects by focusing on the critical aspects of occupied construction and the manner in which to succeed with it.

  8. Construction in Occupied Spaces

    Science.gov (United States)

    Ward, Andrew E.; Azhar, Salman; Khalfan, Malik

    2017-06-01

    Conducting construction activities in occupied environments presents a great challenge due to the additional logistical requirements and the presence of the building occupants. The aim of this research is to gather and evaluate the means and methods to successfully plan, manage, and execute construction activities in occupied spaces in an effort to provide consolidated industry tools and strategies for maintaining a schedule and minimizing the impact on the occupants. The methodology of the research utilizes an exploratory approach to gather qualitative data. The data was collected through interviews with industry professionals to identify industry best practices. The semi-structured interviews provided a platform for the documents, lessons learned, and the techniques and strategies used for occupied construction by the construction industry. The information obtained in the interview process identified six themes that are critical to achieving and maintaining quality in occupied construction. These themes of the schedule, cost, customer satisfaction, planning, fire/life safety and utilities, and contractor management are reviewed in detail, and the paper discusses how to manage each element. The analysis and extracted management techniques, procedures and strategies can be used by the construction industry for future projects by focusing on the critical aspects of occupied construction and the manner in which to succeed with it.

  9. 1Department of Environmental M

    African Journals Online (AJOL)

    USER

    2014-08-01

    Aug 1, 2014 ... impacts of inland sand mining in six selected local government areas of Ogun state, Nigeria. Twenty-seven ... land value, and destruction of infrastructural facilities. The study ... input in the construction industry in many parts of ...

  10. Construction and Demolition Waste

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Andersen, L.

    2011-01-01

    Construction and demolition waste (C&D waste) is the waste generated during the building, repair, remodeling or removal of constructions. The constructions can be roads, residential housing and nonresidential buildings. C&D waste has traditionally been considered without any environmental problems...... should be managed accordingly. Another reason is that it has been documented that a large fraction of C&D waste (about 90 %) can be easily recycled and thus can conserve landfill capacity. C&D waste may conveniently be divided into three subcategories: Buildings, roads and excavations. This chapter...

  11. Construction program management

    CERN Document Server

    Delaney, Joseph

    2013-01-01

    Although construction is one of the largest industries in the United States, it lags behind other industries in its implementation of modern management techniques such as those contained in the Standard for Program Management (the Standard) by the Project Management Institute (PMI(R)). Construction Program Management details the successful use of the PMI(R) approach for the construction of capital programs. It demonstrates, through case studies, how implementation of PMI's set of tools and techniques can improve the chances of program success. Exploring tactical and strategic management method

  12. Sustainability Base Construction Update

    Science.gov (United States)

    Mewhinney, Michael

    2012-01-01

    Construction of the new Sustainability Base Collaborative support facility, expected to become the highest performing building in the federal government continues at NASA's Ames Research Center, Moffet Field, Calif. The new building is designed to achieve a platinum rating under the leadership in Energy and Environment Design (LEED) new construction standards for environmentally sustainable construction developed by the U. S. Green Building Council, Washington, D. C. When completed by the end of 2011, the $20.6 million building will feature near zero net energy consumption, use 90 percent less potable water than conventionally build buildings of equivalent size, and will result in reduced building maintenance costs.

  13. Electronics Department progress report 1984

    International Nuclear Information System (INIS)

    1985-11-01

    This report summarizes the activities in the Electronics Department in 1984. These include work under the headings of informatics, applied laser physics, nuclear geophysics, instrumentation and measuring techniques, and instrumentation consulting, registration and maintenance for the Danish Research Council and Risoe National Laboratory. (author)

  14. Annual report 1985 Chemistry Department

    International Nuclear Information System (INIS)

    Funck, J.; Larsen, E.; Nielsen, O.J.

    1986-03-01

    This report contains a brief survey of the main activities in the Chemistry Department. All particles and reports published and lectures given in 1985 are presented. The facilities and equipment are mentioned briefly. The activities are divided into the following groups: radioisotope chemistry, analytical- and organic chemistry, environmental chemistry, polymer chemistry, geochemistry and waste disposal, radical chemistry, positron annihilation, mineral processing, and general. (author)

  15. Electronics Department progress report 1983

    International Nuclear Information System (INIS)

    1984-05-01

    this report summarizes the Electronics Department's activities in 1983. These include work under the headings of man-machine system and operator studies, reliability techniques, application of nuclear techniques to mineral exploration, applied laser physics, computing and, lastly, research instrumentation. (author)

  16. Annual report 1989 Chemistry Department

    International Nuclear Information System (INIS)

    Funck, J.; Neve Larsen, Aa.; Larsen, E.; Nielsen, O.J.

    1990-03-01

    This report contains a brief survey of the main activities in the Chemistry Department. The names and abstracts of all articles and reports published and lectures given in 1989 are presented. The facilities and equipment are mentioned briefly. The activities are divided into the following groups: radioisotope chemistry, analytical- and organic chemistry, environmental chemistry, polymer chemistry, chemical reactivity, mineral processing, and general. (author)

  17. Annual report 1988 Chemistry Department

    International Nuclear Information System (INIS)

    Funck, J.; Neve Larsen, Aa.; Larsen, E.; Nielsen, O.J.

    1989-05-01

    This report contains a brief survey of the main activities in the Chemistry Department. The names and abstracts of all articles and reports published and lectures given in 1988 are presented. The facilities and equipment are mentioned briefly. The activities are divided into the following groups: radioisotope chemistry, analytical- and organic chemistry, environmental chemistry, polymer chemistry, chemical reactivity, mineral processing, and general. (author)

  18. Annual report 1985 Chemistry Department

    International Nuclear Information System (INIS)

    1987-01-01

    This annual report describes the activities carried out in 1985 by the Chemistry Department in the following fields: Chemistry, Inorganic Chemistry, Physicochemistry (Interphases, Surfaces), General Chemical Analysis, Active Materials Analysis, X Ray Fluorescence Analysis, Mass Spectroscopy (Isotopic Analysis, Instrumentation) and Optical Spectroscopy. A list of publications is enclosed. (M.E.L.) [es

  19. Annual report 1984 Chemistry Department

    International Nuclear Information System (INIS)

    Funck, J.; Larsen, E.; Nielsen, O.J.

    1985-03-01

    This report contains a brief survey of the main activities in the Chemistry Department. All articles and reports published and lectures given in 1984 are presented. The facilities and equipment are mentioned briefly. The activities are divided into the following groups: radioisotope chemistry, analytical- and organic chemistry , environmental chemistry, polymer chemistry, geochemistry and waste disposal, radical chemistry, positron annihilation, mineral processing, and general. (author)

  20. Physics Department annual progress report

    International Nuclear Information System (INIS)

    Moeller, H.B.; Lebech, B.

    1981-12-01

    Research in the Physics Department at Risoe covers three main fields: solid-state physics; plasma physics; meteorology. The principal activities in these fields are presented in this report, which covers the period from 1 January to 31 December 1981. Introductions to the work in each of the main fields are given in the respective sections of the report. (Auth.)

  1. Annual report 1986 chemistry department

    International Nuclear Information System (INIS)

    Funck, J.; Larsen, E.; Nielsen, O.J.

    1987-03-01

    This report contains a brief survey of the main activities in the Chemistry Department. All articles and reports published and lectures given in 1986 are presented. The facilities and equipment are mentioned briefly. The activities are divided into the following groups: radioisotope chemistry, analytical- and organic chemistry, environmental chemistry, polymer chemistry, radical chemistral, mineral processing, and general. (author)

  2. Department of Material Studies - Overview

    International Nuclear Information System (INIS)

    Werner, Z.

    2007-01-01

    The technology of modifying surfaces of practical-use materials by means of continuous and pulsed energy and particle beams has been intensely studied for more than 20 years. In some fields it is presently utilized on a wide scale in industry. Continuous or pulsed ion and plasma beams play a significant role among various approaches used in this area. The research carried by Department P-IX is centered around the use of two own ion implantation machines (ion implanters) of different kind and several world-wide unique sources of high-intensity intense plasma pulses, utilized jointly with Department P-V. The Department cooperates closely with Forschungszentrum Rossendorf (FZR, Dresden, Germany) in the field of ion-beam-based analytical techniques and the use of unique ion implantation facilities. The main objectives of the Department are: search for new ways of modifying surface properties of solid materials by means of continuous or pulsed ion and plasma beams and implementation of ion implantation technique in national industries as a method of improving the lifetime of machine parts and tools utilized in industry. In 2006 these objectives were accomplished in many ways, particularly by research on: formation of superconducting MgB 2 phases, electrical conductivity in metallic nano-layers produced in oxide insulators (Al 2 O 3 ) by ion implantation, ion implantation as a method of improving mechanical properties of stainless steels without degrading their corrosion resistance, ion implantation/plasma treatment of ceramics aimed at improving their wettability in ceramic-metal joints, methods of controlling wear of ceramic-polymer pairs used in bio-medical applications. The research was conducted in cooperation with Department P-V of IPJ, Institute of Nuclear Chemistry and Technology (Warsaw), Warsaw University of Technology, Institute of Technology of Materials for Electronics (Warsaw), and Institute of Molecular Physics Polish Academy of Sciences (Poznan

  3. Department of Energy multiprogram laboratories

    International Nuclear Information System (INIS)

    1982-09-01

    The Panel recommends the following major roles and missions for the laboratories: perform the Department's national trust fundamental research missions in the physical sciences, including high energy and nuclear physics, and the radiobiological sciences including nuclear medicine; sustain scientific staff core capabilities and specialized research facilities for laboratory research purposes and for use by other Federal agencies and the private sector; perform independent scientific and technical assessment or verification studies required by the Department; and perform generic research and development where it is judged to be in the public interest or where for economic or technical reasons industry does not choose to support it. Organizational efficiencies if implemented by the Department could contribute toward optimal performance of the laboratories. The Panel recommends that a high level official, such as a Deputy Under Secretary, be appointed to serve as Chief Laboratory Executive with authority to help determine and defend the research and development budget, to allocate resources, to decide where work is to be done, and to assess periodically laboratory performance. Laboratory directors should be given substantially more flexibility to deploy resources and to initiate or adapt programs within broad guidelines provided by the Department. The panel recommends the following actions to increase the usefulness of the laboratories and to promote technology transfer to the private sector: establish user groups for all major mission programs and facilities to ensure greater relevance for Department and laboratory efforts; allow the laboratories to do more reimbursable work for others (other Federal agencies, state and local governments, and industry) by relaxing constraints on such work; implement vigorously the recently liberalized patent policy; permit and encourage joint ventures with industry

  4. Department of Material Studies - Overview

    International Nuclear Information System (INIS)

    Werner, Z.

    2009-01-01

    Full text: The technology of modifying surfaces of technological materials by means of continuous and pulsed energy and particle beams has been intensely studied for more than 20 years. In some fields, it is currently utilized on a wide scale in industry. Continuous or pulsed ion and plasma beams play a significant role among various approaches used in this area. The research carried by Department P-IX is centered on applications of our two ion implantation facilities (ion implanters) of different kinds and unique sources of high-intensity intense plasma pulses, operated by the Department of Plasma Physics. The Department cooperates closely with Forschungszentrum Rossendorf (FZR, Dresden, Germany) in the field of analytical ion beam techniques and the use of unique ion implantation facilities. The main objectives of the Department are: · the search for new ways of modifying the surface properties of solid materials by means of continuous or pulsed ion and plasma beams and · the implementation of ion implantation techniques in national industries as a method of improving the lifetime of machine parts and tools utilized in industry. In 2008, research was focused on: · ion implantation/plasma treatment of ceramics aimed at improving their wettability in ceramic-metal joints, · ion beam synthesis and plasma pulse activation of superconducting MgB 2 phases, · cobalt and zirconium inclusions in conducting layers produced in oxide insulators (Al 2 O 3 ) by ion implantation and thermal annealing. Research was conducted in cooperation with Department P-V of IPJ, Institute of Nuclear Chemistry and Technology (Warsaw), Warsaw University of Technology, Institute of Technology of Materials for Electronics (Warsaw), Institute of Molecular Physics, Polish Academy of Sciences (Poznan), Institute of Chemical Physics PAS and Forschungszentrum Rossendorf FZR (Dresden, Germany), as well as with some industrial companies. (author)

  5. A construção de colegiados de gestão: a experiência de gestão da Secretaria Municipal de Saúde analisada por um ator político implicado Construction of collegiate management: the managing experience of a Municipal Health Department through the eyes of an involved political actor

    Directory of Open Access Journals (Sweden)

    Aparecida Linhares Pimenta

    2012-05-01

    , like that faced by the country since the early 90s. The empirical field was the management of the municipal health system of Amparo, 2001 to 2006, emphasizing the analysis of the construction of collective spaces, from the documentary analysis, and the statements of managers and employees are made in focus groups . Starting from the position of managing and using empirical data were reported and analyzed the main challenges to build a model of attention with its central structuring primary care and a management model based on collective spaces. The analysis indicates the ability to produce changes in local health systems from the commitment to building management, shared spaces, particularly the shift of power by actors who have more prominent in the biomedical model still hegemonic. Among the challenges for these changes is the ability to deal with the conflict present in the collective spaces, recognizing that lack of management tools to deal with them, either in teams, whether in the teams. Another challenge is the sheer complexity of the health scene, which creates uncertainty regarding the outcome of this work, because in the daily services, the healthcare bill is always under construction. The study concludes that managers need the ability to invest in tension towards the construction of new modes of production of life at the collective level, investing in projects built on equality and democratic coexistence.

  6. Construction, fabrication, and installation

    International Nuclear Information System (INIS)

    1992-05-01

    This standard specifies the construction, fabrication, and installation requirements that apply to concrete containment structures of a containment system designated as class containment components, parts and appurtenances for nuclear power plants

  7. Construction of anhydrite dams

    Energy Technology Data Exchange (ETDEWEB)

    Bortoluzzi, L; Francois, G

    1977-05-01

    To construct a ventilation dam, the road is closed with a fibreglass sheet onto which 3 or 4 cm of anhydrite paste is sprayed. The equipment necessary is described, and the cost is compared with that of an aggregate dam.

  8. Caltrans : construction manual

    Science.gov (United States)

    2009-08-01

    Caltrans intends this manual as a resource for all personnel engaged in contract administration. The manual establishes policies and procedures for the construction phase of Caltrans projects. However, this manual is not a contract document. It impos...

  9. Lead in Construction

    National Research Council Canada - National Science Library

    1993-01-01

    Although Occupational Safety and Health Administration (OSHA) regulations for occupational lead exposure have been in effect since 1971 for the construction and general industries, the agency regulations for general industry in 1978...

  10. On Construction Grammar

    Institute of Scientific and Technical Information of China (English)

    XIAO Kunxue

    2005-01-01

    Constructionist approach with its brand-new perspective has begun to demonstrate its dynamic power. This paper attempts to review the basic ideas, achievements and comparison with generative grammar of Construction Grammar and generalize some problems and future research prospects.

  11. Nuclear power plant construction

    International Nuclear Information System (INIS)

    Lima Moreira, Y.M. de.

    1979-01-01

    The legal aspects of nuclear power plant construction in Brazil, derived from governamental political guidelines, are presented. Their evolution, as a consequence of tecnology development is related. (A.L.S.L.) [pt

  12. Skin Problems in Construction

    Science.gov (United States)

    ... you work with… Wet cement or plaster Abrasive cleaners Paints Adhesives Chemical solvents These materials can contain ... health hazards construction workers face on the job. Production of this card was supported by Grant OH009762 ...

  13. Passive solar construction handbook

    Energy Technology Data Exchange (ETDEWEB)

    Levy, E.; Evans, D.; Gardstein, C.

    1981-08-01

    Many of the basic elements of passive solar design are reviewed. The unique design constraints presented in passive homes are introduced and many of the salient issues influencing design decisions are described briefly. Passive solar construction is described for each passive system type: direct gain, thermal storage wall, attached sunspace, thermal storage roof, and convective loop. For each system type, important design and construction issues are discussed and case studies illustrating designed and built examples of the system type are presented. Construction details are given and construction and thermal performance information is given for the materials used in collector components, storage components, and control components. Included are glazing materials, framing systems, caulking and sealants, concrete masonry, concrete, brick, shading, reflectors, and insulators. The Load Collector Ratio method for estimating passive system performance is appended, and other analysis methods are briefly summarized. (LEW)

  14. Photovoltaic roof construction

    Energy Technology Data Exchange (ETDEWEB)

    Hawley, W.W.

    1980-02-26

    In a batten-seam roof construction employing at least one photovoltaic cell module, the electrical conduits employed with the at least one photovoltaic cell module are disposed primarily under the battens of the roof.

  15. Ship construction and welding

    CERN Document Server

    Mandal, Nisith R

    2017-01-01

    This book addresses various aspects of ship construction, from ship types and construction materials, to welding technologies and accuracy control. The contents of the book are logically organized and divided into twenty-one chapters. The book covers structural arrangement with longitudinal and transverse framing systems based on the service load, and explains basic structural elements like hatch side girders, hatch end beams, stringers, etc. along with structural subassemblies like floors, bulkheads, inner bottom, decks and shells. It presents in detail double bottom construction, wing tanks & duct keels, fore & aft end structures, etc., together with necessary illustrations. The midship sections of various ship types are introduced, together with structural continuity and alignment in ship structures. With regard to construction materials, the book discusses steel, aluminum alloys and fiber reinforced composites. Various methods of steel material preparation are discussed, and plate cutting and form...

  16. Construction and material specification

    Science.gov (United States)

    2002-01-01

    These Construction and Material Specifications are written to the Bidder before award of the : Contract and to the Contractor after award of the Contract. The sentences that direct the Contractor to perform Work are written as commands. For example, ...

  17. Constructive Consumer Choice Processes.

    OpenAIRE

    Bettman, James R; Luce, Mary Frances; Payne, John W

    1998-01-01

    Consumer decision making has been a focal interest in consumer research, and consideration of current marketplace trends ( e.g., technological change, an information explosion) indicates that this topic will continue to be critically important. We argue that consumer choice is inherently constructive. Due to limited processing capacity, consumers often do not have well-defined existing preferences, but construct them using a variety of strategies contingent on task demands. After describing c...

  18. ATLAS construction status

    International Nuclear Information System (INIS)

    Jenni, P.

    2006-01-01

    The ATLAS detector is being constructed at the LHC, in view of a data-taking startup in 2007. This report concentrates on the progress and the technical challenges of the detector construction, and summarizes the status of the work as of August 2004. The project is on track to allow the highly motivated ATLAS Collaboration to enter into a new exploratory domain of high-energy physics in 2007. (author)

  19. International Construction Measurement Standard

    OpenAIRE

    Mitchell, Charles

    2016-01-01

    The International Construction Measurement Standard Coalition (the Coalition) was formed on 17 June 2015 after meeting at the International Monetary Fund in Washington DC, USA. The Coalition, comprising the organisations listed below at the date of publication, aims to bring about consistency in construction cost reporting standards internationally. This is achieved by the creation and adoption of this ICMS, an agreed international standard for the structuring and presentation of cost reports...

  20. Quality during construction

    International Nuclear Information System (INIS)

    Rogers, C.B.

    1977-01-01

    This paper outlines the quality assurance program used by Bechtel Corp. in constructing Nuclear Power Plants. As a tool for scheduling and visualizing situations during construction, power plant scale models are used. The use of models, preplanning, detail scheduling, and early development of procedures and inspection plans, have all contributed to a lower cost integrated quality program. Quality control and quality assurance are built in, thus satisfying the regulatory requirements

  1. Wind Energy Department: Scientific and technical progress 1999-2000

    DEFF Research Database (Denmark)

    2001-01-01

    The activities of the Wind Energy Department fall within boundary layer meteorology, atmospheric turbulence, aerodynamics, aero-acoustics, structural dynamics, machine and construction technology and design of power systems and power system controls. Theobjective is to develop methods for design......; test and siting of wind turbines; prediction of wind loads and wind resources as well as methods to determine the dispersion, transformation and effect of air pollution. The present report describes theorganisation of the department and presents selected scientific highlights and results from the two...

  2. Wind energy department: Scientific and technical progress 1999 - 2000

    International Nuclear Information System (INIS)

    Skrumsager, B.; Larsen, G.

    2001-01-01

    The activities of the Wind Energy Department fall within boundary layer meteorology, atmospheric turbulence, aerodynamics, aero-acoustics, structural dynamics, machine and construction technology and design of power systems and power system controls. The objective is to develop methods for design; test and siting of wind turbines; prediction of wind loads and wind resources as well as methods to determine the dispersion, transformation and effect of air pollution. The present report describes the organisation of the department and presents selected scientific highlights and results from the two-year period 1999-2000. (au)

  3. AP1000 construction schedule

    International Nuclear Information System (INIS)

    Winters, J.W.

    2001-01-01

    Westinghouse performed this study as part of EPRI interest in advancing the use of computer aided processes to reduce the cost of nuclear power plants. EPRI believed that if one could relate appropriate portions of an advanced light water reactor plant model to activities in its construction sequence, and this relationship could be portrayed visually, then optimization of the construction sequence could be developed as never before. By seeing a 3-D representation of the plant at any point in its construction sequence, more informed decisions can be made on the feasibility or attractiveness of follow on or parallel steps in the sequence. The 3-D representation of construction as a function of time (4-D) could also increase the confidence of potential investors concerning the viability of the schedule and the plant ultimate cost. This study performed by Westinghouse confirmed that it is useful to be able to visualize a plant construction in 3-D as a function of time in order to optimize the sequence of construction activities. (author)

  4. 78 FR 65698 - Notice of Availability of the Final Environmental Impact Statement for the Gas Hills In Situ...

    Science.gov (United States)

    2013-11-01

    ... production areas, or mine units, with subsurface ore bodies within the Wind River Formation for ISR extraction. Construction, operation, groundwater restoration, and surface reclamation of five mine units... Department of Environmental Quality Land Quality Division's (WDEQ-LQD) Mine Permit Application 687. In...

  5. Division of Mechanical Construction - Overview

    International Nuclear Information System (INIS)

    Halik, J.

    2000-01-01

    Full text: The Department of Mechanical Construction consists of the Design Group and the Mechanical Workshop. The activity of the Department includes the following:- designs of devices and equipment for experiments in physics and their mechanical construction and assembly, particularly vacuum chambers and installations for HV and UHV; - maintenance and upgrading of the existing installations and equipment in our Institute; - participation of our engineers and technicians in design works, equipment assembly and maintenance for experiments in foreign laboratories. The Design Group is equipped with PC-computers and AutoCad graphic software (release 12 and 13) what allows to make drawings and a mechanical documentation which meets world standards. Also ANSYS (version 5.2) - a software for mechanical, heat and magnetic calculations using finite-elements methods is used in our design activity. The Mechanical Workshop can offer a wide range of machining and treatment methods with satisfactory tolerances and surface quality. The Workshop offers the following possibilities: - turning - cylindrical elements of a length up to 2000 mm and a diameter up to 400 mm, and also disc-type elements of a diameter up to 600 mm and a length not exceeding 300 mm; - milling - elements of length up to 1000 mm and gear wheels of diameter up to 300 mm; - grinding - flat surfaces of dimensions up to 300 mm x 1000 mm and cylindrical elements of a diameter up to 200 mm and a length up to 800 mm; - drilling - holes of a diameter up to 50 mm; - welding - electrical and gas welding, including TIG vacuum-tight welding; - soft and hard soldering; - mechanical works including precision engineering; - plastics treatment - machining and polishing using diamond milling, modelling, lamination of various shapes and materials, including plexiglas, scintillators and light-guides; - painting - paint spraying with possibility of using furnace-fired drier of internal dimensions of 800 mm x 800 mm x 800 mm. Our

  6. Enabling department-scale supercomputing

    Energy Technology Data Exchange (ETDEWEB)

    Greenberg, D.S.; Hart, W.E.; Phillips, C.A.

    1997-11-01

    The Department of Energy (DOE) national laboratories have one of the longest and most consistent histories of supercomputer use. The authors summarize the architecture of DOE`s new supercomputers that are being built for the Accelerated Strategic Computing Initiative (ASCI). The authors then argue that in the near future scaled-down versions of these supercomputers with petaflop-per-weekend capabilities could become widely available to hundreds of research and engineering departments. The availability of such computational resources will allow simulation of physical phenomena to become a full-fledged third branch of scientific exploration, along with theory and experimentation. They describe the ASCI and other supercomputer applications at Sandia National Laboratories, and discuss which lessons learned from Sandia`s long history of supercomputing can be applied in this new setting.

  7. Annual report 1987 Chemistry Department

    International Nuclear Information System (INIS)

    Funck, J.; Larsen, E.; Nielsen, O.J.

    1988-04-01

    This report contains a brief survey of the main activities in the Chemistry Department. The names and abstracts of all articles and reports published and lectures given in 1987 are presented. The facilities and equipment are mentioned briefly. The activities are divided into the following groups: radioisotope chemistry, analytical- and organic chemistry, environmental chemistry, polymer chemistry, radical chemistry, mineral processing, and general. 13 ills., (author)

  8. Advertising Emergency Department Wait Times

    OpenAIRE

    Weiner, Scott G

    2013-01-01

    Advertising emergency department (ED) wait times has become a common practice in the United States. Proponents of this practice state that it is a powerful marketing strategy that can help steer patients to the ED. Opponents worry about the risk to the public health that arises from a patient with an emergent condition self-triaging to a further hospital, problems with inaccuracy and lack of standard definition of the reported time, and directing lower acuity patients to the higher cost ED se...

  9. Annual report 1983 Chemistry Department

    International Nuclear Information System (INIS)

    Funck, J.; Larsen, E.; Nielsen, O.J.

    1984-05-01

    This report contains a brief survey of the main activities in the Chemistry Department. All articles and reports published and lectures given in 1983 are presented. The facilities and equipment are barely mentioned. The activities are divided into nine groups: 1. radioisotope chemistry 2. analytical- and organic chemistry 3. environmental chemistry 4. polymer chemistry 5. geochemistry and waste disposal 6. radical chemstry 7. positron annihilation 8. mineral processing 9. general. (author)

  10. Annual report 1982 chemistry department

    International Nuclear Information System (INIS)

    Larsen, E.; Nielsen, O.J.

    1983-04-01

    The work going on in the Risoe National Laboratory, Chemistry Department is briefly surveyed by a presentation of all articles and reports published in 1982. The facilities and equipment are barely mentioned. The papers are divided into eight activities: 1. neutron activation analysis 2. analytical- and organic chemistry 3. environmental chemistry 4. polymer chemistry 5. geochemistry 6. radical chemistry 7. poitron annihilation 8. uranium process chemistry. (author)

  11. Constructability and maintainability

    International Nuclear Information System (INIS)

    Hart, R.S.

    1985-01-01

    A set of principles for minimizing the construction schedule was established at the outset of the CANDU 300 programme. Consideration of these principles and other factors led to the development of the unique CANDU 300 station layout. The paper discusses the CANDU 300 station layout and construction methods. In summary, the station layout provides 360 deg. construction access to all buildings, separation of nuclear and non-nuclear systems, precise and minimal physical interfaces between buildings, accommodation of many contractors and construction activities without interference, and maximum flexibility in terms of constructional, financial and supply arrangements. The CANDU 300 further employs modularization, shop fabrication and advanced instrumentation (multiplexers, remote processors, data highways) to minimize construction time. Many of the CANDU 300 features that enhance constructability also contribute to maintainability. These include the 360 deg. access to all principal buildings, the uncluttered and spacious building layouts, the simplification of systems and the high level of modularization. The CANDU 300 has also been designed to facilitate the replacement of all key components, thereby offering an essentially unlimited station life. A prime example is a reduction in the fuel channel inlet end-fitting diameter such that the fuel channels can be shop assembled and easily replaced after the initial 40 years of operation, without an extended unit outage. Maintainability within the reactor building has been given particular attention in the CANDU 300 design; key features of other CANDU reactors (the ability to replace a heat transport system pump motor at power, for example) have been incorporated, while accessibility and maintainability of all systems and components have been enhanced. These and other aspects of maintainability are discussed. (author)

  12. Benchmarking in academic pharmacy departments.

    Science.gov (United States)

    Bosso, John A; Chisholm-Burns, Marie; Nappi, Jean; Gubbins, Paul O; Ross, Leigh Ann

    2010-10-11

    Benchmarking in academic pharmacy, and recommendations for the potential uses of benchmarking in academic pharmacy departments are discussed in this paper. Benchmarking is the process by which practices, procedures, and performance metrics are compared to an established standard or best practice. Many businesses and industries use benchmarking to compare processes and outcomes, and ultimately plan for improvement. Institutions of higher learning have embraced benchmarking practices to facilitate measuring the quality of their educational and research programs. Benchmarking is used internally as well to justify the allocation of institutional resources or to mediate among competing demands for additional program staff or space. Surveying all chairs of academic pharmacy departments to explore benchmarking issues such as department size and composition, as well as faculty teaching, scholarly, and service productivity, could provide valuable information. To date, attempts to gather this data have had limited success. We believe this information is potentially important, urge that efforts to gather it should be continued, and offer suggestions to achieve full participation.

  13. Automation of Personnel Certification Roadbuilding Departments and Enterprises

    Directory of Open Access Journals (Sweden)

    Andrey Vladimirovich Ostroukh

    2015-10-01

    Full Text Available The article suggests science-based solutions to improve the efficiency of personnel certification of road construction departments and enterprises by developing an integrated learning environment based on an automated system of distance learning with the open source software and methodological support, tailored to the professional standards. Personnel certification procedure of road construction departments and enterprises for optimization and automation is analyzed. Optimization solutions for all stages of the preparation and conduction conformance testing to create test tasks for batch import of test tasks in a database of test tasks and adaptive algorithm for bringing the subject of tests proposed and implemented. The developed technique of adaptive presentation may perform various functions, depending on the settings of the algorithm.

  14. Construction time of PWRs

    Energy Technology Data Exchange (ETDEWEB)

    Carajilescov, Pedro; Moreira, Joao M.L., E-mail: pedro.carajilescov@ufabc.edu.b, E-mail: joao.moreira@ufabc.edu.b [Universidade Federal do ABC (UFABC), Santo Andre, SP (Brazil). Center of Engineering, Modeling and Applied Social Sciences

    2011-07-01

    The cost of electricity generated by nuclear power is greatly affected by the capital cost, which is dependent on the construction time of the plant. This work analyses the construction time of PWRs in several countries with different market structure and licensing experience. Countries which succeeded to establish a more collaborative environment among utilities, constructors, regulators, and energy planners through effective partnerships were able to build PWRs in shorter times. The construction time in Germany, France and Russia was around 80 months and in Japan, about 60 months. The envelope of 95% of the cases includes a range between 50 and 250 months of construction time. The evaluations show that construction time of PWRs has been longer for countries that did not hold the technology to build their own reactors, and depended on contracts with foreign suppliers. The nominal power of the reactors was considered a measure of plant size, technology complexity and standardization. Countries with standardized reactor designs (France, Japan and Russia) were able to build plants in shorter times. (author)

  15. Construction time of PWRs

    International Nuclear Information System (INIS)

    Carajilescov, Pedro; Moreira, Joao M.L.

    2011-01-01

    The cost of electricity generated by nuclear power is greatly affected by the capital cost, which is dependent on the construction time of the plant. This work analyses the construction time of PWRs in several countries with different market structure and licensing experience. Countries which succeeded to establish a more collaborative environment among utilities, constructors, regulators, and energy planners through effective partnerships were able to build PWRs in shorter times. The construction time in Germany, France and Russia was around 80 months and in Japan, about 60 months. The envelope of 95% of the cases includes a range between 50 and 250 months of construction time. The evaluations show that construction time of PWRs has been longer for countries that did not hold the technology to build their own reactors, and depended on contracts with foreign suppliers. The nominal power of the reactors was considered a measure of plant size, technology complexity and standardization. Countries with standardized reactor designs (France, Japan and Russia) were able to build plants in shorter times. (author)

  16. Constructive renormalization theory

    International Nuclear Information System (INIS)

    Rivasseau, Vincent

    2000-01-01

    These notes are the second part of a common course on Renormalization Theory given with Professor P. da Veiga. I emphasize here the rigorous non-perturbative or constructive aspects of the theory. The usual formalism for the renormalization group in field theory or statistical mechanics is reviewed, together with its limits. The constructive formalism is introduced step by step. Taylor forest formulas allow to perform easily the cluster and Mayer expansions which are needed for a single step of the renormalization group in the case of Bosonic theories. The iteration of this single step leads to further difficulties whose solution is briefly sketched. The second part of the course is devoted to Fermionic models. These models are easier to treat on the constructive level so they are very well suited to beginners in constructive theory. It is shown how the Taylor forest formulas allow to reorganize perturbation theory nicely in order to construct the Gross-Neveu 2 model without any need for cluster or Mayer expansions. Finally applications of this technique to condensed matter and renormalization group around Fermi surface are briefly reviewed. (author)

  17. ITER towards the construction

    International Nuclear Information System (INIS)

    Shimomura, Y.

    2005-01-01

    The ITER Project has been significantly developed in the last few years in preparation for its construction. The ITER Participant's Negotiators have developed the Joint Implementation Agreement (JIA), ready for finalisation following selection of the construction site and nomination of the project's Director General. The ITER International Team and Participant Teams have continued technical and organisational preparations. Construction will be able to start immediately after the international ITER organisation is established, following signature of the JIA. The Project is strongly supported by the governments of the Participants as well as by the scientific community. The real negotiations, including siting and the final details of cost sharing, started in December 2003. The EU, with Cadarache, and Japan, with Rokkasho, have both promised large contributions to the project to strongly support their construction site proposals. Their wish to host ITER construction is too strong to allow convergence to a single site considering the ITER device in isolation. A broader collaboration among the Parties is therefore being contemplated, covering complementary activities to help accelerate fusion development towards a viable power source, and allow the Participants to reach a conclusion on ITER siting. This report reviews these preparations, and the status of negotiations

  18. PIK reactor construction status

    International Nuclear Information System (INIS)

    Konoplev, K.A.; Smolsky, S.L.

    2001-01-01

    The 100MW reactor PIK for fundamental researches has a thermal neutron flux of more than 10 15 n/cm 2 sec. This presentation outlines the construction state as of 2001, its prospects and completion tactics in the conditions of unstable finance. Construction of the reactor started in 1976. In 1986 construction of the building was completed and significant part of the installation work fulfilled. Construction of cooling systems was finished, the control panel assembled, and adjustment of the pump and gate valve control circuits started. After Chernobyl catastrophe, the USSR nuclear reactor safety requirements were revised. The PIK design did not meet these requirements and underwent considerable revision. The reconstruction design resulted in double the initial cost. Creation of the containment was the bulkiest part of the reconstruction. It brought about the need to disassemble the roofing of the building, dismantle all the equipment of the two upper floors, and lay up the equipment of the lower floors. As of 2001, construction in accordance with the revised design is at the stage of assemblage of the most important units, i.e. reactor itself, cooling system, heavy water system, and a number of auxiliary systems, such as depleted fuel storage, emergency cooling system etc. (orig.)

  19. Montana Department of Transportation - a fine feathered friend

    OpenAIRE

    Wambach, Deborah A.; Traxler, Mark A.; Eakin, Kirk W.

    2001-01-01

    Funding Source: Federal Highway Administration (FHWA) Total Budget: $1000 - $5000 per project Project Period: Ongoing Since 1995 In Montana, across the nation, and around the world, highway construction activities often come into direct conflict with migratory and other nesting bird species, frequently resulting in habitat loss, the interruption of breeding and rearing activities, or even mortality. The Montana Department of Transportation (MDT) has considered this issue under the permitting...

  20. Department of Defense Agency Financial Report for FY 2011

    Science.gov (United States)

    2011-11-01

    able to distribute resources across hospitals and clinics within a market to meet the needs of the entire population of eligible beneficiaries. In...WRAMC), Washington, DC. This entailed construction of a new community hospital and a dental clinic at Fort Belvoir and an expansion of the National...Department of Defense DSB Defense Science Board DSS Defense Security Service DTM Directive-type Memorandum DTS Defense Travel System EBF Education

  1. Management for Construction Materials and Control of Construction Waste in Construction Industry: A Review

    OpenAIRE

    A. A. Gulghane; Prof P. V. Khandve

    2015-01-01

    In recent treads a wide range of building materials is available for the construction of civil engineering structures. The total cost of materials may be up to 60% or more of the total cost incurred in construction project dependent upon the type of project. Effective construction materials management is a key to success for a construction project. Construction waste is another serious problem in construction industry. A large and various types of construction waste with different...

  2. 75 FR 76444 - Environmental Impact Statement (EIS) for Construction and Operation of a Panoramic Survey...

    Science.gov (United States)

    2010-12-08

    ... potential environmental impacts associated with construction and operation of the proposed Panoramic Survey... DEPARTMENT OF DEFENSE Department of the Air Force Environmental Impact Statement (EIS) for Construction and Operation of a Panoramic Survey Telescope and Rapid Response System (Pan-STARRS) at the Summit...

  3. Analysis of emergency department waiting lines

    Directory of Open Access Journals (Sweden)

    Urška Močnik

    2014-10-01

    Full Text Available Background: Steady increase in the numbers of patients seeking medical assistance has recently been observed at the emergency department of the health center under study. This has led to increases in waiting times for patients. The management of the health center has been considering to implement certain measures to remedy this situation. One proposed solution is to add an additional physician to the emergency department. A computer model was constructed to simulate waiting lines and analyze the economic feasibility of employing an additional physician.Aim: This paper analyzes the waiting lines at the emergency department and performs an economic feasibility study to determine whether adding an additional physician to the department would be economically justified.Methods: Data about waiting times at the emergency department were collected to study the situation. For each patient, the arrival time at the waiting room and the starting and ending times of the examination were registered. The data were collected from 13 June 2011 to 25 September 2011. The sample included data on 65 nightly standbys, nine standbys on Saturdays, and 16 standbys on Sundays. Due to incomplete entries, data for nine weekly standbys and six Saturday standbys were excluded from the sample. Based on the data collected, we calculated the waiting and examination times per patient, average number of patients, average waiting time, average examination time, share of active standby teams in total standby time, and number of patients in different time periods. The study involved 1,039 patients. Using a synthesis method, we designed a computer model of waiting lines and economic feasibility. The model was validated using comparative analysis. A what-if analysis was performed using various computer simulations with various scenarios to consider the outcomes of decision alternatives. We applied economic analysis to select the best possible solution.Results: The research results

  4. Hazards Control Department 1995 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, G.W.

    1996-09-19

    This annual report of the Hazards Control Department activities in 1995 is part of the department`s efforts to foster a working environment at Lawrence Livermore National Laboratory (LLNL) where every person desire to work safely.

  5. Department of Accelerator Physics and Technology: Overview

    International Nuclear Information System (INIS)

    Pachan, M.

    1999-01-01

    Full text: As presented at the overview seminar held on December 98, the activities of the Department were shared among several directions of accelerator applications, as well as research and development works on new accelerator techniques and technologies. In the group of proton and ion accelerators, two main tasks were advanced. The first was a further step in the optimization of operational parameters of multicusp ion-source, prepared for axial injection system in C-30 cyclotron. Another one is the participation in important modifications of r.f. acceleration system in heavy-ion accelerator C-200 of Warsaw University. In the broad field of electron accelerators our main attention was directed at medical applications. Most important of them was the designing and construction of a full scale technological model of a high-gradient accelerating structure for low-energy radiotherapy unit CO-LINE 1000. Microwave measurements, and tuning were accomplished, and the technical documentation for construction of radiation unit completed. This work was supported by the State Committee for Scientific Research. Preparatory work was continued to undertake in the year 1999 the design of two new medical accelerators. First is a new generation radiotherapy unit, with 15 MeV electron beam and two selected energies of X-ray photons. This accelerator should in future replace the existing Neptun 10 MeV units. The work will be executed in the frame of the Project-Ordered commissioned by the State Committee for Scientific Research. The next type of accelerators in preparation is the mobile, self-shielded electron-beam unit for inter operative irradiation. The specification of parameters was completed and study of possible solutions advanced. The programme of medical accelerator development is critically dependent on the existence of a metrological and experimental basis. Therefore the building of a former proton linear accelerator was adopted to the new function as electron accelerators

  6. 48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

    Science.gov (United States)

    2010-10-01

    ... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

  7. Labor construction trends

    International Nuclear Information System (INIS)

    McCall, H.W.

    1976-01-01

    The increasing costs and schedule delays being experienced in construction projects have led companies to look for alternatives to their present methods of expansion. One of the facets being evaluated is the construction labor posture. As a result, more companies are employing open shop contractors. Certain benefits can be realized by open shop construction. Productivity, in terms of the time required and overall costs, is definitely improved at no sacrifice in quality. Before an owner decides to build a project open shop, however, he must be fully aware of the pro's and con's of both types of labor posture. He must know to select a capable open shop contractor and he must realize his obligations for a successful open shop program

  8. APPLIED ORGANIZATION OF CONSTRUCTION

    Directory of Open Access Journals (Sweden)

    Kievskiy Leonid Vladimirovich

    2017-03-01

    Full Text Available Applied disciplines in the sphere of construction which are engaged in the solution of vital macroeconomical problems (the general trend of development of these disciplines is the expansion of problematics and mutual integration are considered. Construction organization characteristic at the present stage as a systems engineering discipline covering the investment process of creation of real estate items, is given. The main source of current research trends for applied sciences (socio-economic development forecasts, regional and local programs is determined. Interpenetration and integration of various fields of knowledge exemplified by the current interindustry problem of blocks renovation organization of existing development, is demonstrated. Mathematical model of wave construction (for the period of deployment is proposed. Nature of dependence of the total duration of renovation on the limit of annual input and coefficient of renovation, is established. Overall structure of the Moscow region housing market is presented, and approaches to definition of effective demand are proposed.

  9. Reliability and construction control

    Directory of Open Access Journals (Sweden)

    Sherif S. AbdelSalam

    2016-06-01

    Full Text Available The goal of this study was to determine the most reliable and efficient combination of design and construction methods required for vibro piles. For a wide range of static and dynamic formulas, the reliability-based resistance factors were calculated using EGYPT database, which houses load test results for 318 piles. The analysis was extended to introduce a construction control factor that determines the variation between the pile nominal capacities calculated using static versus dynamic formulae. From the major outcomes, the lowest coefficient of variation is associated with Davisson’s criterion, and the resistance factors calculated for the AASHTO method are relatively high compared with other methods. Additionally, the CPT-Nottingham and Schmertmann method provided the most economic design. Recommendations related to a pile construction control factor were also presented, and it was found that utilizing the factor can significantly reduce variations between calculated and actual capacities.

  10. Department of Cosmic Ray Physics: Overview

    International Nuclear Information System (INIS)

    Szabelski, J.

    2001-01-01

    Full text: The Department of Cosmic Ray Physics in Lodz is involved in basic research in the area of high-energy physics and cosmic ray physics related to: Experimental and phenomenological studies of Extensive Air Showers induced by cosmic ray particles. Studies of ultra-high energy (above 10 19 eV) cosmic rays: determination of energy and primary particle mass composition. Studies of asymptotic properties of hadronic interactions based on the analysis of cosmic ray propagation through the atmosphere. Studies of mass composition of cosmic rays in the energy range 10 15 -10 17 eV. Registration of cosmic ray intensity variation correlated with solar activity. Theoretical and experimental studies of Extensive Air Shower properties are performed mostly based on the results obtained by the Lodz Extensive Air Shower Array. We have noticed unexplainable delayed signals registered about 500-900 microseconds after the main EAS pulse. We prepared hardware for further experimental study of this effect. In September we have started registration of 5 GeV muon flux with the underground muon telescope. We registered 3 decreases of muon intensity correlated with Forbush decreases registered at lower energies. Variations of primary cosmic ray of energies up to about 100 GeV were responsible for our registrations. These set the upper limits for geometrical size of geomagnetic disturbances in interplanetary space. In construction and data interpretation of cosmic ray experiments, the Lodz group collaborates with many foreign institutes and laboratories: Forschungszentrum in Karlsruhe (Germany), College de France, Institute for Nuclear Studies of the Russian Academy of Sciences and Uppsala University (Sweden). We have organised (together with the Physics Department of the University of Lodz) the 17 th European Cosmic Ray Symposium (24-?8 July 2000) in which about 150 physicists participated (about 100 from abroad). (author)

  11. Management of technical information department

    Energy Technology Data Exchange (ETDEWEB)

    Kim, T H; Han, D H; Moon, H W [and others

    1997-03-01

    This report introduces technical information activities in 1996. They are composed of basic tasks and applied tasks. 1. Basic activities - acquisition, cataloging, and Information services 2. Management of KAERI-TIPS (Technical Information Processing System) 3. Construction of the database for nuclear-related Information 4. Role of Specialized Nuclear Information Center in the field of nuclear energy and cooperation with INIS section of IAEA 5. Beside above activities, in 1996 TID homepage was opened and online document delivery service was provided. (author). 25 tabs., 17 figs.

  12. Management of technical information department

    International Nuclear Information System (INIS)

    Kim, T. H.; Han, D. H.; Moon, H. W.

    1997-03-01

    This report introduces technical information activities in 1996. They are composed of basic tasks and applied tasks. 1. Basic activities - acquisition, cataloging, and Information services 2. Management of KAERI-TIPS (Technical Information Processing System) 3. Construction of the database for nuclear-related Information 4. Role of Specialized Nuclear Information Center in the field of nuclear energy and cooperation with INIS section of IAEA 5. Beside above activities, in 1996 TID homepage was opened and online document delivery service was provided. (author). 25 tabs., 17 figs

  13. CERN : Nouveaux records lors d'une période d'exploitation au PS/SPS ; Un nouveau rôle pour les ISR ; Deuxième région d'intersection pour le système pp du SPS ; Détermination de la durée de vie du charme ; Calcul en Sicile et au CERN

    CERN Multimedia

    1979-01-01

    CERN : Nouveaux records lors d'une période d'exploitation au PS/SPS ; Un nouveau rôle pour les ISR ; Deuxième région d'intersection pour le système pp du SPS ; Détermination de la durée de vie du charme ; Calcul en Sicile et au CERN

  14. Department of Structural Research - Overview

    International Nuclear Information System (INIS)

    Wasiutynski, T.

    1999-01-01

    Full text: Two main subjects dominated activity of Department of Structural Research this year: dynamics of molecules in condensed matter and magnetic properties of new materials. The former subject is to be understood in a very broad sense. It embraces fast quantum and classical reorientations of small molecules in disordered crystalline phases as well as rather slow motions of large molecules and molecular segments in liquid crystals and polymers. Glassy states occurring in such systems were of particular interest. The magnetic materials studied in our department fall into two categories: canonical substances such as rare earth orthoferrites and the recently discovered molecular magnets. A typical study of a substance in our group consists of a series of experiments involving various complementary methods followed by advanced theoretical and model analysis. The experimental work is performed on great instruments accessible for us owing to the well established network of international cooperations and in great number at our own premises. The main experimental tools of our department are: adiabatic and differential scanning calorimeters, Fourier transformed infrared absorption spectrometer, ac susceptibility/dc magnotemeter and Cahn balance. All of them operate in wide temperature range: 4 - 400 K. Magnetic measurements are carried out in dc field up 56 kOe. An important improvement of out equipment took place last year. New hardware and software were devised to control the calorimetric measurements. Consequently temperature flows as slow as 1 μK/min are now detectable, that makes the calorimeter a perfect tool for the studies of slow relaxational processes in condensed matter. A new option of data acquisition applied to the infrared spectrometer allows one to study the kinetics of phase transformations in real time. The time resolution is of order of few minutes. This is of special importance in the studies of glassy phases which evolve in the time scale of hours

  15. Department of Nuclear Spectroscopy - Overview

    International Nuclear Information System (INIS)

    Styczen, J.

    2002-01-01

    Full text: The Nuclear Spectroscopy Department is the largest department of the Institute. It merges a variety of research groups having been performing investigations with a rich diversity of methods: from pure studies of the structure of nucleus and of nuclear properties through applied nuclear spectroscopy in condensed matter research, to the complex biophysical investigations of biological tissues. The nuclear structure experiments were performed mainly in European Large Scale Facilities (ALPIINFN-Legnaro, VIVITRON-IReS-Strasbourg, JYFL-K100-Cyclotron) with the use of the GASP, EUROBALL IV, RITU systems and with application of ancillary detectors - HECTOR+HELENA, RFD. Some data were obtained with the GAMMASPHERE in USA. Other research has been based on our own instrumentation - VdG, AFM, Dual-Beam-Implanter, PAC, Moessbauer spectrometers etc., in a strong co-operation with Polish and European institutions, of course. The atomic studies were done on the ESR at GSI in Darmastadt. In several pages which follow, some important results of the investigations in the Department are presented. In 2001, Dr hab. Jerzy Dryzek and Dr hab. Adam Maj were granted the Associated Professor positions, and Miss Agnieszka Kulinska and Mrs Maria Kmiecik - the Ph.D. degrees. Dr Kmiecik was also awarded the Henryk Niewodniczanski prize for studies of 147 Eu compound nucleus shape evolution. Some of us became (continued to be) members of International Committees - the PHINUFY (R. Broda), the Steering Committee of RISING at GSI (J. Styczen), the PAC of the VIVITRON at Strasbourg (J. Styczen). We organized an International Conference on Condensed Matter Studies (100 participants), which belonged to the well known series of Zakopane School of Physics. It's Proceedings appeared as a volume of the Acta Physica Polonica A journal. (author)

  16. Growth of the Female Professional in the Radiation Safety Department

    International Nuclear Information System (INIS)

    Yoon, J.

    2015-01-01

    Currently in Korea’s Nuclear Power Plants (KHNP), the number of the female staffs has been increased as planned construction of new NPPs. However the role of the female staffs in NPPs is still limited as before. Because there is the prejudice which the operating and the maintenance work is unsuitable for female owing to the risk of the radiation exposure and the physical weakness. So female staffs mostly belong to the supporting departments. In particular, the proportion of the female staffs is significantly higher in the radiation safety department among those. The ratio is 15% and is twice higher, whereas the total percentage of the female workers in KHNP is 8%. In the past, the women staffs in the radiation safety department were usually charge of the non-technical duties like the radiation exposure dose management and the education for radiation workers. Although the ratio of the women about that is still higher, nowadays, the role of the female workers tends to diversify to technical supports like the radiation protection and the radioactive waste management while increased the proportion of female employees. This trend is expected to continue for many years to come. Thus, in Korea’s NPPs, it is expected that many women will demonstrate their professionalism especially in the radiation safety department than any other departments. This presentation contains the detailed duty and trend about female staffs in the radiation safety department in Korea’s NPPs. (author)

  17. Construction Management Meets Today's Realities.

    Science.gov (United States)

    Day, C. William

    1979-01-01

    Construction management--the control of cost and time from concept through construction--grew out of a need to meet the realities of today's economy. A checklist of services a construction manager provides is presented. (Author/MLF)

  18. Construction Manager or General Contractor?

    Science.gov (United States)

    McKinley, John

    1991-01-01

    Unlike the general contractor approach, the construction management firm acts on behalf of the school district in school construction. Examines the development and nature of construction management, and cites its advantages and disadvantages. (MLF)

  19. PWR plant construction in Japan

    International Nuclear Information System (INIS)

    Tamura, Toshifumi

    2002-01-01

    The construction methods based on the experiences on the Nuclear Island, which is a critical path in the total construction schedule, have been studied and reconsidered in order to construct by more reliable and economical method. So various improved construction method are being applied and the duration of construction is being reduced continuously. So various improved construction method are being applied and the duration of construction is being reduced continuously. In this paper, the history of construction of twenty-three (23) PWR Plant, the actual construction methods and schedule of Ohi-3/4, to which the many improved methods were applied during their construction, are introduced mainly with the improved points for previously constructed plants. And also the situation of construction method for the next PWR Plant is simply explained

  20. Violence in the Emergency Department.

    Science.gov (United States)

    Stowell, Keith R; Hughes, Nolan P; Rozel, John S

    2016-12-01

    Violence is common in the emergency department (ED). The ED setting has numerous environmental risk factors for violence, including poor staffing, lack of privacy, overcrowding, and ready availability of nonsecured equipment that can be used as weapons. Strategies can be taken to mitigate the risk of violence toward health care workers, including staff training, changes to the ED layout, appropriate use of security, and policy-level changes. Health care providers in the ED should be familiar with local case law and standards related to the duty to warn third parties when a violent threat is made by a patient. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. Shock in the emergency department

    DEFF Research Database (Denmark)

    Holler, Jon Gitz; Henriksen, Daniel Pilsgaard; Mikkelsen, Søren

    2016-01-01

    BACKGROUND: The knowledge of the frequency and associated mortality of shock in the emergency department (ED) is limited. The aim of this study was to describe the incidence, all-cause mortality and factors associated with death among patients suffering shock in the ED. METHODS: Population...... failures. Outcomes were annual incidence per 100,000 person-years at risk (pyar), all-cause mortality at 0-7, and 8-90 days and risk factors associated with death. RESULTS: We identified 1646 of 438,191 (0.4 %) ED patients with shock at arrival. Incidence of shock increased from 53.8 to 80.6 cases per 100...

  2. Department of Material Studies: Overview

    International Nuclear Information System (INIS)

    Werner, Z.

    2003-01-01

    Full text: The technology of modifying surfaces of industrial-use materials by means of continuous and pulsed energy beams has been intensely studied for more than 20 years. In some fields it is presently utilized on a broad scale in industry. Continuous or pulsed ion and plasma beams play a significant role among various approaches used. Department P-IX (jointly with Department P-V) utilizes some globally unique sources of intense plasma pulses, and jointly with Forschungszentrum Rossendorf (FZR, Dresden, Germany) conducts research on the application of continuous ion beams using FZR and IPJ facilities. The main objectives of the Department are: - a search for new ways of modifying surface properties of solid materials by means of pulsed plasma beams; - the implementation of ion implantation technique in national industries as a method of improving the lifetime of machine parts and tools utilized in industry. In 2002 these objectives were accomplished in many ways, particularly by research on phase changes in steel irradiated with intense pulsed plasma beams, Si-implanted TiN coatings on steel, implantation of high doses of nitrogen into aluminum, and corrosion properties of Ti surfaces alloyed with Pd by implantation and/or plasma pulses. The research was aimed at practical objectives like finding novel hard coatings, improving resistance to high temperature oxidation, reducing friction between NC6 steel-made parts without using a lubricating agent etc. The research was conducted in cooperation with Department P-V of IPJ, Institute of Nuclear Chemistry and Technology (Warsaw), Warsaw University of Technology, Institute of Technology of Materials for Electronics (Warsaw), Forschungszentrum Rossendorf FZR (Dresden, Germany), as well as with some industrial companies. Some research in 2002 was aimed at improving of the rod plasma injector generator used in our lab (the mechanism of electrode erosion during the plasma discharge, ablation of substrate material induced

  3. Justice Department Airline Merger Policy

    Science.gov (United States)

    Farmer, D. A.

    1972-01-01

    Justice Department airline merger policy is developed within the context of the Federal Aviation Act, in which there is an unusually explicit reliance on competition as a means of fulfilling statutory goals. The economics of the airline industry appear to indicate that low concentration and vigorous competition are particularly viable and desirable. Several factors, including existing regulatory policy, create incentives for airlines to merge whether or not an individual merger promotes or conflicts with the public interest. Specific benefits to the public should be identified and shown to clearly outweight the detriments, including adverse competitive impact, in order for airline mergers to be approved.

  4. The Frederic Joliot hospital department

    International Nuclear Information System (INIS)

    1999-02-01

    The Service Hospitalier Frederic Joliot (SHFJ) of the CEA, has got a scientific and a medical mission: to develop techniques allowing the functional study of human organs. The paper presents the main activities of this department: the positron emission tomography to visualize in real time markers in the organism in neurology and cardiology, researches on epilepsy to localize the epileptic centre, the nuclear medicine in cardiology with the use of the gamma photon emission tomography and the radiopharmacology to visualize the drugs effects in the organism. (A.L.B.)

  5. Progress report 1981-1982. Reactor Chemistry Department

    International Nuclear Information System (INIS)

    1983-08-01

    Review of the activities performed by the Reactor Chemistry Department of the National Atomic Energy Commission of Argentina during 1981-1982. This Department provides services and assistance in all matters related to water chemistry and nuclear reactors chemistry, in all their phases: design, construction, commissioning and decommissioning. During this period, the following tasks were performed: study of the metallic oxide-water interphases; determination of the goethite and magnetite surficial charges; synthesis of the monodispersed nickel ferrites; study of the iron oxides dissolution mechanism in presence of different complexing agents; chemical decontamination of structural metals; thermodynamics of the water-nitrogen system; physico-chemical studies of aqueous solutions at high temperatures; hydrothermal decomposition of ionic exchange resines and study of the equilibria of the anionic exchange for the chemistry of pressurized reactor's primary loops. The appendix includes information on the Reactor Chemistry Department staff, its publications, services, seminars, courses and conferences performed during 1981-1982. (R.J.S.) [es

  6. Tank Operations Contract Construction Management Methodology. Utilizing The Agency Method Of Construction Management

    International Nuclear Information System (INIS)

    Lesko, K.F.; Berriochoa, M.V.

    2010-01-01

    Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business constructioin subcontractors while performing high hazard work in a safe and productive manner. Previous to the WRPS contract, construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper descirbes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method (John E Schaufelberger, Len Holm, 'Management of Construction Projects, A Constructor's Perspective', University of Washington, Prentice Hall 2002). This method was implemented in the first quarter of Fiscal Year 2009 (FY2009), where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted

  7. TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT

    Energy Technology Data Exchange (ETDEWEB)

    LESKO KF; BERRIOCHOA MV

    2010-02-26

    Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business constructioin subcontractors while performing high hazard work in a safe and productive manner. Previous to the WRPS contract, construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper descirbes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method (John E Schaufelberger, Len Holm, "Management of Construction Projects, A Constructor's Perspective", University of Washington, Prentice Hall 2002). This method was implemented in the first quarter of Fiscal Year 2009 (FY2009), where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are

  8. Constructive Preference Elicitation

    Directory of Open Access Journals (Sweden)

    Paolo Dragone

    2018-01-01

    Full Text Available When faced with large or complex decision problems, human decision makers (DM can make costly mistakes, due to inherent limitations of their memory, attention, and knowledge. Preference elicitation tools assist the decision maker in overcoming these limitations. They do so by interactively learning the DM’s preferences through appropriately chosen queries and suggesting high-quality outcomes based on the preference estimates. Most state-of-the-art techniques, however, fail in constructive settings, where the goal is to synthesize a custom or entirely novel configuration rather than choosing the best option among a given set of candidates. Many wide-spread problems are constructive in nature: customizing composite goods such as cars and computers, bundling products, recommending touristic travel plans, designing apartments, buildings, or urban layouts, etc. In these settings, the full set of outcomes is humongous and can not be explicitly enumerated, and the solution must be synthesized via constrained optimization. In this article, we describe recent approaches especially designed for constructive problems, outlining the underlying ideas and their differences as well as their limitations. In presenting them, we especially focus on novel issues that the constructive setting brings forth, such as how to deal with sparsity of the DM’s preferences, how to properly frame the interaction, and how to achieve efficient synthesis of custom instances.

  9. Construction Management: Planning Ahead.

    Science.gov (United States)

    Arsht, Steven

    2003-01-01

    Explains that preconstruction planning is essential when undertaking the challenges of a school building renovation or expansion, focusing on developing a detailed estimate, creating an effective construction strategy, conducting reviews and value-engineering workshops, and realizing savings through effective risk analysis and contingency…

  10. ACCELERATING CONSTRUCTION INDUSTRY DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Mohan M. Kumaraswamy

    2006-06-01

    Full Text Available The needs for construction industry development are initially viewed from the broader perspectives of imperatives for infrastructure development and national development. All these are clearly more critical in developing countries. A non-exhaustive set of potential drivers and common barriers to construction industry development is identified from previous research. These suggest the usefulness of consolidating a cluster of recent proposals and exercises aiming at (a construction organization development in terms of an over-arching management support system model, as well as improved information and knowledge management; and (b project team development in the context of relationally integrated teams and supply chains, joint risk management and ‘technology and knowledge exchange’ in joint ventures, as well as longer term public private partnerships. These apparently disparate research thrusts are threaded together into a pattern that may inspire, if not feed, specific research and development (R & D agendas for construction industry development in different countries according to their own priorities, constraints and stages of infrastructure and national development.

  11. Constructions of Peripherality

    DEFF Research Database (Denmark)

    Carter, Helen Frances Lindsay

    2013-01-01

    In this paper I focus on the concept of peripheralisation. In particular, I consider how peripheries can be discursively constructed in the debates surrounding planning cases, and how this might serve to legitimate particular interests. This is related to the case of a proposed golf resort...

  12. Nanotechnologies for sustainable construction

    DEFF Research Database (Denmark)

    Geiker, Mette Rica; Andersen, Maj Munch

    2009-01-01

    This chapter aims to highlight key aspects and recent trends in the development and application of nanotechnology to facilitate sustainable construction, use and demolition of buildings and infrastructure structures, ‘nanoconstruction’. Nanotechnology is not a technology but a very diverse...

  13. Provability Calculus of Constructions

    DEFF Research Database (Denmark)

    Nyblad, Kasten

    This thesis presents a type system, Provability Calculus of Constructions (PCoC) that can be used for the formalization of logic. In a theorem prover based on the system, the user can extend the prover with new inference rules in a logically consistent manner. This is done by representing PCo...

  14. KARATE WITH CONSTRUCTIVE LEARNING

    Directory of Open Access Journals (Sweden)

    Srikrishna Karanam

    2012-02-01

    Full Text Available Any conventional learning process involves the traditional hierarchy of garnering of information and then recall gathered information. Constructive learning is an important research area having wide impact on teaching methods in education, learning theories, and plays a major role in many education reform movements. It is observed that constructive learning advocates the interconnection between emotions and learning. Human teachers identify the emotions of students with varying degrees of accuracy and can improve the learning rate of the students by motivating them. In learning with computers, computers also should be given the capability to recognize emotions so as to optimize the learning process. Image Processing is a very popular tool used in the process of establishing the theory of Constructive Learning. In this paper we use the Optical Flow computation in image sequences to analyze the accuracy of the moves of a karate player. We have used the Lucas-Kanade method for computing the optical flow in image sequences. A database consisting of optical flow images by a group of persons learning karate is formed and the learning rates are analyzed in order to main constructive learning. The contours of flow images are compared with the standard images and the error graphs are plotted. Analysis of the emotion of the amateur karate player is made by observing the error plots.

  15. Mortality table construction

    Science.gov (United States)

    Sutawanir

    2015-12-01

    Mortality tables play important role in actuarial studies such as life annuities, premium determination, premium reserve, valuation pension plan, pension funding. Some known mortality tables are CSO mortality table, Indonesian Mortality Table, Bowers mortality table, Japan Mortality table. For actuary applications some tables are constructed with different environment such as single decrement, double decrement, and multiple decrement. There exist two approaches in mortality table construction : mathematics approach and statistical approach. Distribution model and estimation theory are the statistical concepts that are used in mortality table construction. This article aims to discuss the statistical approach in mortality table construction. The distributional assumptions are uniform death distribution (UDD) and constant force (exponential). Moment estimation and maximum likelihood are used to estimate the mortality parameter. Moment estimation methods are easier to manipulate compared to maximum likelihood estimation (mle). However, the complete mortality data are not used in moment estimation method. Maximum likelihood exploited all available information in mortality estimation. Some mle equations are complicated and solved using numerical methods. The article focus on single decrement estimation using moment and maximum likelihood estimation. Some extension to double decrement will introduced. Simple dataset will be used to illustrated the mortality estimation, and mortality table.

  16. Constructions in Wonderland

    DEFF Research Database (Denmark)

    Jensen, Kim Ebensgaard; Shibuya, Yoshikata

    -gram analysis to some different texts, including Lewis Carroll's 1865 novel Alice's Adventures in Wonderland (AW), Mark Twain's 1884/5 novel The Adventures of Huckleberry Finn (HF), and some US presidential speeches, to identify frequently (co)occurring words that may be indicative of underlying constructions...

  17. Constructing Regional advantage

    DEFF Research Database (Denmark)

    Asheim, Bjørn T.; Boschma, Ron; Cooke, Phil

    2011-01-01

    This paper presents a regional innovation policy model based on the idea of constructing regional advantage. This policy model brings together concepts like related variety, knowledge bases and policy platforms. Related variety attaches importance to knowledge spillovers across complementary...... economic development within and between regions in action lines appropriate to incorporate the basic principles behind related variety and differentiated knowledge bases....

  18. Predictable grammatical constructions

    DEFF Research Database (Denmark)

    Lucas, Sandra

    2015-01-01

    My aim in this paper is to provide evidence from diachronic linguistics for the view that some predictable units are entrenched in grammar and consequently in human cognition, in a way that makes them functionally and structurally equal to nonpredictable grammatical units, suggesting that these p......My aim in this paper is to provide evidence from diachronic linguistics for the view that some predictable units are entrenched in grammar and consequently in human cognition, in a way that makes them functionally and structurally equal to nonpredictable grammatical units, suggesting...... that these predictable units should be considered grammatical constructions on a par with the nonpredictable constructions. Frequency has usually been seen as the only possible argument speaking in favor of viewing some formally and semantically fully predictable units as grammatical constructions. However, this paper...... semantically and formally predictable. Despite this difference, [méllo INF], like the other future periphrases, seems to be highly entrenched in the cognition (and grammar) of Early Medieval Greek language users, and consequently a grammatical construction. The syntactic evidence speaking in favor of [méllo...

  19. AA under construction

    CERN Multimedia

    CERN PhotoLab

    1979-01-01

    The AA at an early stage of construction, in the newly built AA-Hall. Cable-trays already outline the shape of the accumulator ring. To the right are huge cable-drums for the pulse-forming-network (PFN) of the injection kicker. Seeing this picture, can one imagine that only 8 months later beams were circulating in the completed accumulator ring ?

  20. Housing and construction

    Science.gov (United States)

    Delton Alderman

    2014-01-01

    OECD economies, in aggregate, have been sluggish; unemployment remains high in several countries, and minimal gross domestic product gains are forecast for the Euro area through 2016. Recession, sovereign debt problems and lethargic economies continue to constrain Europe’s housing construction market; no improvement is expected before 2015 or...

  1. Patterns of Knowledge Construction

    Science.gov (United States)

    Chang, Bo

    2018-01-01

    The purpose of this study was to identify knowledge construction patterns in a local learning community. Observation, documents, and semistructured interviews were employed to collect data. Twenty learners were interviewed. Data were analyzed inductively using the constant comparative method. Five major patterns--radiation, circulation,…

  2. Neuroeconomics: Constructing identity

    NARCIS (Netherlands)

    Davis, J.B.

    2010-01-01

    The paper asks whether neuroeconomics will make instrumental use of neuroscience to adjudicate existing disputes in economics or be more seriously transformed by neuroscience in ways that might transform economics. The paper pursues the question by asking how neuroscience constructs an understanding

  3. Construction of monophase nets

    International Nuclear Information System (INIS)

    Suarez A, Jose Antonio

    1996-01-01

    The paper refers to the use of monophase loads in commercial residential urbanizations and in small industries, for this reason it is considered unnecessary the construction of three-phase nets. The author makes a historical recount of these nets in Bogota, his capacities, uses and energy savings

  4. Anyonic FRT construction

    International Nuclear Information System (INIS)

    Majid, S.; Rodriguez-Plaza, M.J.

    1994-01-01

    The Faddeev-Reshetikhin-Takhtajan method to construct matrix bialgebras from non-singular solutions of the quantum Yang-Baxter equation is extended to the anyonic or Z n -graded case. The resulting anyonic quantum matrices are braided groups in which the braiding is given by a phase factor. (orig.)

  5. Department of Nuclear Physical Chemistry

    International Nuclear Information System (INIS)

    Mikulski, J.

    1994-01-01

    The research program at the Department of Nuclear Physical Chemistry of the Niewodniczanski Institute of Nuclear Physics is described. The Department consist of three laboratories. First - Laboratory of Physical Chemistry of Separation Processes on which the activity is concentrated on production and separation of neutron deficient isotopes for medical diagnostic. Recently, the main interest was in 111 In which is a promising tracer for cancer diagnostic. To increase the effectiveness of production of indium 111 In the reaction with deuterons on the enriched cadmium target was carried out instead of the previously used one with alpha particles on natural silver. In the second one - Laboratory of Chemistry and Radiochemistry - the systematic studies of physicochemical properties of transition elements in solutions are carried out. The results of the performed experiments were used for the elaboration of new rapid and selective methods for various elements. Some of these results have been applied for separation of trans actinide elements at U-400 cyclotron of JINR Dubna. The third one laboratory -Environmental Radioactivity Laboratory - conducts continuous monitoring of radioactivity contamination of atmosphere. The investigation of different radionuclides concentration in natural environment, mainly in the forest had been carried out

  6. Next HR Department public meeting

    CERN Multimedia

    2016-01-01

    Dear Colleagues, I am pleased to invite you to the next public meeting organized by the HR Department, which will take place on Tuesday 28 June at 3 p.m. in the Council Chamber. A drink will be served after the meeting as of 16:30 This meeting will be the opportunity to revisit the specificities of the Career Structure measures and Benchmark Jobs, what they entail and how they will be implemented, and to answer your questions. This meeting is also important for me on a personal note, as I will bid you farewell, at least for a few years, taking special leave as of 1 August 2016 to take up the position of Director-General for Human Resources at the European Central Bank in Frankfurt.  Should you not be able to attend the meeting, it can also be followed via Webcast and the recording will be made available on Indico. I look forward to meeting you. Best regards, Anne-Sylvie Catherin Head of the Human Resources Department

  7. At the ISR intersection region I-7

    CERN Multimedia

    1983-01-01

    One sees on the left the setup of the experiment R704 which aimed to study charmonium spectroscopy using a 4 GeV/c antiproton beam and a hydrogen-jet gas target (see Annual Report 1982 p. 109 and 1883 p. 127). Lars Leistam stands on top of the passerelle.

  8. Collecting to Win: ISR for Strategic Effect

    Science.gov (United States)

    2014-02-13

    Cryptologic History (Ft. George G. Meade , MD: National Security Agency, 1992), 1-143; Matthew M. Aid, The Secret Sentry: The Untold History of the National...United States Cryptologic History. Ft. George G. Meade , MD: National Security Agency, 1992. Norris, Pat. Spies in the Sky: Surveillance Satellites in...Submitted to the Faculty In Partial Fulfillment of the Graduation Requirements Advisor: Dr. Herbert L. Frandsen, Jr. 13 February 2014

  9. ISR-1 Seminar: Nuclear Cloud Lofting

    International Nuclear Information System (INIS)

    Walker, Andrew Charles

    2016-01-01

    This report goes into detail about motivation, background, lofting methodologies (empirical, parcel methods, Navier-Stokes), DELFIC Model, validation, DIORAMA integration, and has the following conclusions: A parcel methodology was applied to develop the DIORAMA cloud lofting module. It is based on the DELFIC model and treats the cloud as a homogenous unit. It solves the set of 8 ODEs for cloud properties. It outputs the time history of the cloud height, radius, and other parameters. The cloud lofting module was tuned with 54 test cases. An iterative brute force search was carried out to find the best fit tuning parameters. The best fit parameters yielded average cloud height errors of 12.9% and 10.3% for the bottom and top, respectively. This all allows for more accurate modeling of the propagation of delayed gamma rays in DIORAMA.

  10. p- physics at the SPS and ISR

    International Nuclear Information System (INIS)

    Jacob, M.

    1977-01-01

    In the near future, colliding-beam proton machines could reach energies of the order of 400 to 1000 GeV in the center-of-mass. This may involve two rings. This may involve a single ring with circulating protons and anti-protons. This new energy domain should be rich in surprises. Yet, the key present motivation for such an endeavor is the search for the W/sup +-/ (Z 0 ) weak bosons. Present expectations are reviewed. Even though such extrapolations are very speculative, they may have some use in detector design

  11. Indigenous lunar construction materials

    Science.gov (United States)

    Rogers, Wayne P.; Sture, Stein

    1991-01-01

    The utilization of local resources for the construction and operation of a lunar base can significantly reduce the cost of transporting materials and supplies from Earth. The feasibility of processing lunar regolith to form construction materials and structural components is investigated. A preliminary review of potential processing methods such as sintering, hot-pressing, liquification, and cast basalt techniques, was completed. The processing method proposed is a variation on the cast basalt technique. It involves liquification of the regolith at 1200-1300 C, casting the liquid into a form, and controlled cooling. While the process temperature is higher than that for sintering or hot-pressing (1000-1100 C), this method is expected to yield a true engineering material with low variability in properties, high strength, and the potential to form large structural components. A scenario for this processing method was integrated with a design for a representative lunar base structure and potential construction techniques. The lunar shelter design is for a modular, segmented, pressurized, hemispherical dome which could serve as habitation and laboratory space. Based on this design, estimates of requirements for power, processing equipment, and construction equipment were made. This proposed combination of material processing method, structural design, and support requirements will help to establish the feasibility of lunar base construction using indigenous materials. Future work will refine the steps of the processing method. Specific areas where more information is needed are: furnace characteristics in vacuum; heat transfer during liquification; viscosity, pouring and forming behavior of molten regolith; design of high temperature forms; heat transfer during cooling; recrystallization of basalt; and refinement of estimates of elastic moduli, compressive and tensile strength, thermal expansion coefficient, thermal conductivity, and heat capacity. The preliminary

  12. Constructing the Audience

    DEFF Research Database (Denmark)

    Willig, Ida

    2010-01-01

    No more than twenty years ago, the doors between the newsrooms and the marketing departments of Danish newspapers were tightly shut. Today, all major Danish newspapers work with reader profiles using marketing data to create journalistic concepts. This article identifies two dominant reader...

  13. Department of Accelerator Physics and Technology - Overview

    International Nuclear Information System (INIS)

    Plawski, E.

    2006-01-01

    The activities of P-10 Department in year 2005 were devoted to: - development of radiographic 4 MeV electron accelerator, - development of accelerating and deflecting types travelling (TW) and standing wave (SW) RF structures for electrons and ions, - MC simulations applied to photon and ion radiotherapy The compact 6 MeV electron linac constructed in Department P-10 was put in the beginning of reported year into experimental operation. The request for permission to use ionisation source (6 MeV linac) was submitted to National Atomic Energy Agency. On the basis of all necessary documents the permission for routine using of our linac was granted. Actually the e/X conversion tungsten target has been moved from vacuum to air. To improve the safety of accelerator operation, the new collimator and some shielding walls were added. Two regimes of operation are actually possible: X ray output beam or electron beam depending on user demand. Some old non-reliable sub-units of accelerator were replaced, and energy and intensity optimisation for e-/X-ray conversion were made. The MC calculations of photon beams produced on e-/X converter were repeated taking into account the new collimator and additional shields. The triode gun, originally thought of as a part of 6/15 MeV medical accelerator is still on long term tests showing excellent performance; it was twice opened to air to confirm the possibility of repeated formation of gun dispenser cathode. New pulse modulator was routinely used in these tests. The sublimation set-up designed and made in our Department for the TiN coating of accelerator components underwent successfully the technological test including coating quality of several ceramic RF power vacuum windows. Within the German heavy ion therapy program the DKFZ Heidelberg is responsible for medical physics problems of treatment planning and modeling of ion beams for GSI Radiotherapy Facility. The MC simulations are used to calibrate the X-ray CT scanners to obtain

  14. Department of Cosmic Radiation Physics: Overview

    International Nuclear Information System (INIS)

    Gawin, J.

    1999-01-01

    Full text: The Department of Cosmic Ray Physics in Lodz is involved in basic research in the area of high energy physics and cosmic ray physics related to: - Studies of asymptotic properties of hadronic interactions based on the analysis of cosmic ray propagation in the atmosphere. - Experimental and phenomenological studies of Extensive Air Showers induced by cosmic ray particles. - Search for point sources of high energy cosmic rays. - Studies of cosmic ray propagation in the Galaxy and mechanisms of particle acceleration. - Studies of mass composition of cosmic rays in the energy range 10 15 - 10 17 eV. Theoretical and experimental studies of Extensive Air Shower properties are performed mostly based on the results obtained by the Lodz Extensive Air Shower Array. We analysed nearly 100,000 events of energies above 10 15 eV registered by the Lodz hodoscope. We have developed the method of data analysis which allows us to verify different models of cosmic ray mass composition. In our research in high energy cosmic rays we also used experimental data from other collaborating experiments in Karlsruhe, Baksan and THEMISTOCLE. The Lodz group collaborates with many foreign institutes and laboratories in construction and data interpretation of cosmic ray experiments. Our most important partners are: Forschungszentrum in Karlsruhe (Germany), College de France, Institute for Nuclear Studies of the Russian Academy of Science, University of Perpignan and Uppsala University (Sweden). (author)

  15. Department of Cosmic Radiation Physics - Overview

    International Nuclear Information System (INIS)

    Gawin, J.

    1997-01-01

    Full text: The Department of Cosmic Ray Physics in Lodz is involved in basic research in the area of high energy physics and cosmic ray physics related to: -Studies of the asymptotic properties of hadronic interactions from the analysis of cosmic ray propagation in the atmosphere. -Studies of structure and properties of Extensive Air Showers induced by cosmic ray particles. -Search for point sources of high energy cosmic rays. -Studies of cosmic ray propagation in the Galaxy and mechanisms of particle acceleration. -Studies of the mass composition of cosmic rays in the energy range 10 15 -10 17 eV. Theoretical and experimental studies of nuclear interactions for energies exceeding those obtained by modern particle accelerators are performed employing results obtained by the Lodz Extensive Air Shower Array. The Lodz hodoscope can register electromagnetic components of cosmic ray showers in the atmosphere as well as muons at two energy thresholds. Data collected by the Lodz array are also used to study mass composition of cosmic rays in the energy range 10 15 - 10 17 eV. The Lodz group collaborates with foreign institutes and laboratories on construction and data interpretation of cosmic ray experiments. Our most important partners are: Forschungszentrum Karlsruhe (Germany), College de France, the Institute for Nuclear Studies of the Russian Academy of Sciences, the University of Durham, and the University of Perpignan. (author)

  16. Department of Cosmic Radiation Physics: Overview

    International Nuclear Information System (INIS)

    Szabelski, J.

    2000-01-01

    Full text: Department of Cosmic Ray Physics in Lodz is involved in basic research in the area of high-energy physics and cosmic ray physics related to: -Studies of asymptotic properties of hadronic interactions based on the analysis of cosmic ray propagation through the atmosphere. -Experimental and phenomenological studies of Extensive Air Showers induced by cosmic ray particles. - Search for high-energy cosmic ray point sources. - Studies of cosmic ray propagation in the Galaxy and particle acceleration mechanisms. -Studies of mass composition of cosmic rays in the energy range 10 15 -10 17 eV. Theoretical and experimental studies of Extensive Air Shower properties are performed mainly on the basis of the results obtained by the Lodz Extensive Air Shower Array. We have analysed nearly 100,000 events of energies above 10 15 eV registered in the Lodz hodoscope. We have developed a method to verify different models of cosmic ray mass composition. The Lodz group collaborates with many foreign institutes and laboratories in construction and data interpretation of cosmic ray experiments. Our most important partners are: Forschungszentrum in Karlsruhe (Germany), College de France, Institute for Nuclear Studies of the Russian Academy of Sciences and Uppsala University (Sweden). (author)

  17. Department of Cosmic Radiation Physics: Overview

    International Nuclear Information System (INIS)

    Gawin, J.

    1998-01-01

    (full text) The Department of Cosmic Ray Physics in Lodz is involved in basic research in the area of high energy physics and cosmic ray physics related to: -Studies of asymptotic properties of hadronic interactions based on the analysis of cosmic ray propagation in the atmosphere. -Studies of the structure and properties of Extensive Air Showers induced by cosmic ray particles. - Search for point sources of high energy cosmic rays. - Studies of cosmic ray propagation in the Galaxy and mechanisms of particle acceleration. - Studies of mass composition of cosmic rays in the energy range l0 15 -10 17 eV. Theoretical and experimental studies of nuclear interactions for energies exceeding those obtained by modern particle accelerators are performed based on the results obtained by the Lodz Extensive Air Shower Array. The Lodz hodoscope can register the electromagnetic component of cosmic ray showers developing in the atmosphere as well as muons of two energy thresholds. Data collected by the Lodz array are also used to study the mass composition of cosmic rays in the energy range 10 15 -10 17 eV. The Lodz group collaborates with many foreign institutes and laboratories in construction and data interpretation of cosmic ray experiments. Our most important partners are: Forschungszentrum Karlsruhe (Germany), College de' France, the Institute for Nuclear Studies of the Russian Academy of Science, the University of Perpignan (France) and Uppsala University (Sweden). (author)

  18. Department of Particle Theory - Overview

    International Nuclear Information System (INIS)

    Jezabek, M.

    1999-01-01

    Full text: Research performed at the Department of Particle Theory is devoted to fundamental particles and their interactions. These studies are closely related to the current and future high energy experiments at e + e - and hadron-hadron colliders: LEP, TESLA, Tevatron and LHC. The papers reported below cover a wide range of particle physics from neutrino masses and oscillations to processes involving heavy particles like gauge and Higgs bosons or the top quark. An evidence of neutrino oscillations observed by the SuperKamiokande Collaboration was the most spectacular discovery of the year 1998. In a theoretical investigation performed at our department a relation has been found between the so called see-saw mechanism and the bi-maximal neutrino mixing. Since many years a very important and labour-consuming part of the research activities is related to precision tests of the Standard Model. In the last year successful runs of LEP2 stimulated an impressive progress in theoretical description of processes with two- and four-fermion final states in electron-positron annihilation. It is worth stressing that the results of the calculations have been distributed in the form of the computer programs (Monte Carlo and other types) which serve as an indispensable tool in the analysis of the experimental data. Although the whole scientific program is a natural continuation of the activities started earlier a few results obtained in the last year should be mentioned: Publication of the four-fermion Monte Carlo program KORALW for high energy e + e - colliders; Development of the exponentiation scheme at the spin amplitude level and studies of the anomalous couplings for the e + e - → f (anti)f (nγ) processes; Relation between QCD static potentials in momentum and position spaces, and its consequences for bottom and top quark pair production and spectroscopy; Participation in the preparation of the physics program of the pp experiments on LHC collider particularly for Higgs

  19. LECI Department of Nuclear Materials

    International Nuclear Information System (INIS)

    2006-01-01

    The LECI is a 'hot' laboratory dedicated mostly to the characterization of irradiated materials. It has, however, limited activities on fuel, as a back up to the LECA STAR in Cadarache. The LECI belongs to the Section of Research on Irradiated Materials (Department of Nuclear Materials). The Department for Nuclear Materials (DMN) has for its missions: - to contribute, through theoretical and experimental investigations, to the development of knowledge in materials science in order to be able to predict the evolution of the material physical and mechanical properties under service conditions (irradiation, thermomechanical solicitations, influence of the environment,..); - to characterize the properties of the materials used in the nuclear industry in order to determine their performance and to be able to predict their life expectancy, in particular via modelling. These materials can be irradiated or not, and originate from surveillance programs, experimental neutron irradiations or simulated irradiations with charged particles; - to establish, maintain and make use of the databases generated by these data; - to propose new or optimized materials, satisfying future service conditions and extend the life or the competitiveness of the associated systems; - to establish constitutive laws and models for the materials in service, incidental, accidental and storage conditions, and contribute to the development of the associated design codes in order to support the safety argumentation of utilities and vendors; - to provide expertise on industrial components, in particular to investigate strain or rupture mechanisms and to offer leads for improvement. This document presents, first, the purpose of the LECI (Historical data, Strategy, I and K shielded cell lines (building 605), M shielded cell line (building 625), Authorized materials). Then, it presents the microscopy and irradiation damage studies laboratory of the Saclay centre (Building 605) Which belongs to the Nuclear

  20. [Talking about the discipline construction and development of burn from five ideas].

    Science.gov (United States)

    Guo, G H

    2018-03-20

    Discipline construction is an important aspect of hospital modernization management and construction. The level of medical treatment, education, and scientific research could be assured and improved through discipline construction, which could speed up the talent training, promote science and technology innovation, and realize the sustainable development of hospital. At present, most of the hospital management models adopt the two ranks of the hospital and department. The manager of a department must grasp medical treatment, education, scientific research, and discipline construction steadily. The author talks about the discipline construction and development of burn from " five ideas" for the readers.