Mound technology for isolation of decommissioned NPPs

International Nuclear Information System (INIS)

Korovkin, S.V.; Tutunina, E.V.

2012-01-01

The problem of NPPs' decommissioning calls for immediate attention. Today the most socially acceptable solution is green lawn, but due to the difficulty of this option, alternative solutions are being developed as well. The authors believe that the option is isolation of shut-down NPPs in-situ by covering them with layers of inert materials, resulting in the formation of a mound. In this case the reactor building itself becomes a repository that holds solid radioactive wastes generated over the time of unit operation. Spent fuel is to be shipped out of the site. A layer of inert materials several meters thick guarantees secure protection against ionising radiation and unauthorised access to the structures in isolation. The structures inside the mound are also inaccessible to ground waters. The green mound concept is considered as well as the mound backfilling technology which excludes collapse under the weight of inert materials that form the mound. It is pointed out that never-completed Voronezh nuclear heating plant is the optimal object for field-testing of the suggested technology [ru

Nonlinear damping based semi-active building isolation system

Science.gov (United States)

Ho, Carmen; Zhu, Yunpeng; Lang, Zi-Qiang; Billings, Stephen A.; Kohiyama, Masayuki; Wakayama, Shizuka

2018-06-01

Many buildings in Japan currently have a base-isolation system with a low stiffness that is designed to shift the natural frequency of the building below the frequencies of the ground motion due to earthquakes. However, the ground motion observed during the 2011 Tohoku earthquake contained strong long-period waves that lasted for a record length of 3 min. To provide a novel and better solution against the long-period waves while maintaining the performance of the standard isolation range, the exploitation of the characteristics of nonlinear damping is proposed in this paper. This is motivated by previous studies of the authors, which have demonstrated that nonlinear damping can achieve desired performance over both low and high frequency regions and the optimal nonlinear damping force can be realized by closed loop controlled semi-active dampers. Simulation results have shown strong vibration isolation performance on a building model with identified parameters and have indicated that nonlinear damping can achieve low acceleration transmissibilities round the structural natural frequency as well as the higher ground motion frequencies that have been frequently observed during most earthquakes in Japan. In addition, physical building model based laboratory experiments are also conducted, The results demonstrate the advantages of the proposed nonlinear damping technologies over both traditional linear damping and more advanced Linear-Quadratic Gaussian (LQG) feedback control which have been used in practice to address building isolation system design and implementation problems. In comparison with the tuned-mass damper and other active control methods, the proposed solution offers a more pragmatic, low-cost, robust and effective alternative that can be readily installed into the base-isolation system of most buildings.

Seismic response of base-isolated buildings using a viscoelastic model

International Nuclear Information System (INIS)

Uras, R.A.

1993-01-01

Due to recent developments in elastomer technology,seismic isolation using elastomer bearings is rapidly gaining acceptance as a design tool to enhance structural seismic margins and to protect people and equipment from earthquake damage. With proper design of isolators, the fundamental frequency of the structure can be reduced to a value that is lower than the dominant frequencies of earthquake ground motions. The other feature of an isolation system is that it can provide a mechanism for energy dissipation. In the USA, the use of seismic base-isolation has become an alternate strategy for advanced Liquid Metal-cooled Reactors (LMRs). ANL has been deeply involved in the development and implementation of seismic isolation for use in both nuclear facilities and civil structures for the past decade. Shimizu Corporation of Japan has a test facility at Tohoku University in Sendai, Japan. The test facility has two buildings: one is base isolated and the other is conventionally founded. The buildings are full-size, three-story reinforced concrete structures. The dimensions and construction of the superstructures are identical. They were built side by side in a seismically active area. In 1988, the ANL/Shimizu Joint Program was established to study the differences in behavior of base-isolated and ordinarily founded structures when subjected to earthquake loading. A more comprehensive description of this joint program is presented in a companion paper (Wang et al. 1993). With the increased use of elastomeric polymers in industrial applications such as isolation bearings, the importance of constitutive modeling of viscoelastic materials is more and more pronounced. A realistic representation of material behavior is essential for computer simulations to replicate the response observed in experiments

Status of technology for isolating high-level radioactive wastes in geologic repositories

International Nuclear Information System (INIS)

Klingsberg, C.; Duguid, J.

1980-10-01

This report attempts to summarize the status of scientific and technological knowledge relevant to long-term isolation of high-level and transuranic wastes in a mined geologic repository. It also identifies and evaluates needed information and identifies topics in which work is under way or needed to reduce uncertainties. The major findings and conclusions on the following topics are presented: importance of the systems approach; prospects for successful isolation of wastes; need for site-specific investigations; human activities in the future; importance of modelling; disposal of transuranic wastes; status of technology of isolation barriers, performance assessment, site selection and characterization, and potential host rocks

Fault detection and fault tolerant control of a smart base isolation system with magneto-rheological damper

International Nuclear Information System (INIS)

Wang, Han; Song, Gangbing

2011-01-01

Fault detection and isolation (FDI) in real-time systems can provide early warnings for faulty sensors and actuator signals to prevent events that lead to catastrophic failures. The main objective of this paper is to develop FDI and fault tolerant control techniques for base isolation systems with magneto-rheological (MR) dampers. Thus, this paper presents a fixed-order FDI filter design procedure based on linear matrix inequalities (LMI). The necessary and sufficient conditions for the existence of a solution for detecting and isolating faults using the H ∞ formulation is provided in the proposed filter design. Furthermore, an FDI-filter-based fuzzy fault tolerant controller (FFTC) for a base isolation structure model was designed to preserve the pre-specified performance of the system in the presence of various unknown faults. Simulation and experimental results demonstrated that the designed filter can successfully detect and isolate faults from displacement sensors and accelerometers while maintaining excellent performance of the base isolation technology under faulty conditions

Real-Time WGS-based Typing of VTEC Isolates for Surveillance and Outbreak Detection

DEFF Research Database (Denmark)

Joensen, Katrine Grimstrup; Hasman, Henrik; Scheutz, F.

2013-01-01

the IonTorrent PGM benchtop sequencing technology. WGS-based typing was carried out using web-based tools, developed by the Center for Genomic Epidemiology (www.genomicepidemiology.org), for determination of MLST types, virulence genes and phylogenetic relationship between the isolates. The WGS-based...... a small outbreak occurred. For all isolates, apart from one resulting in poor sequence output, the WGS-based typing led to detection of the same virulence gene variants as the routine typing, and was also able to detect many other possible virulence features, and in most instances produce a useful typing...... result faster than routine typing. Also, the WGS-approach was able to correctly detect, according to the routine typing, the isolates belonging to the outbreak. Conclusion: The real-time WGS-based typing was able to produce typing results comparable to the routine typing, at least as fast as the routine...

Technological and Probiotic Traits of the Lactobacilli Isolated From Vaginal Tract of the Healthy Women for Probiotic Use

OpenAIRE

Bouridane, Hamida; Sifour, Mohamed; Idoui, Tayeb; Annick, Lejeune; Thonard, Philip

2016-01-01

Background For biotechnological application, selected lactic acid bacteria strains belonging to the genera Lactobacillus (Lb) are proposed as an alternative to the antibiotics for the prevention and treatment of urogenital tract infections. Objectives Isolating and selecting vaginal lactobacilli strains for probiotic use based on their technological and probiotic aptitudes. Materials and Methods The vaginal isolates were examined for their essential characteristics as the potential probiotic ...

Proceedings of the first international seminar on seismic base isolation for nuclear power facilities

International Nuclear Information System (INIS)

1989-01-01

The First International Seminar on Seismic Base Isolation of Nuclear Power Facilities was organized by the authors of this paper. It was held in San Francisco, California, USA, on August 21--22, 1989, in conjunction with the tenth International Conference on Structural Mechanics in Reactor Technology (SMiRT-10). The purpose of the seminar was to provide an international forum for discussion on the application of base isolation to nuclear power plants and of its effectiveness in reducing seismic loads and permitting standard plant designs. It also provided an opportunity for technical interchange between base isolation system designers, structural engineers, and nuclear power plant engineers. Seismic isolation is certainly one of the most significant earthquake engineering developments in recent years. This was clearly demonstrated by the very large attendance at this seminar and the various papers presented. Isolation system act as filters that reduce the seismic forces and increase the ability of isolated structures and their contents to withstand the damaging effects of earthquake motions. Each individual paper has been cataloged separately

E-Beam - a new transfer system for isolator technology

International Nuclear Information System (INIS)

Sadat, Theo; Huber, Thomas

2002-01-01

In every aseptic filling application, the sterile transfer of goods into the aseptic area is a challenge, and there are many different ways to do it. With isolator technology a higher sterility assurance level (SAL) is achieved. This SAL is only as good as the weakest segment in the chain of manufacturing. The transfer of goods into and out of the isolator is one of these critical segments. Today different techniques, some already well established, others still very new, are available on the market like: dry heat tunnel, autoclave, pulsed light, rapid transfer systems (RTP), H 2 O 2 tunnel, UV light, etc. all these systems are either not applicable for continuous transfer, only good for heat-compatible materials like glass, or do not guarantee a 6 log spore reduction. E-Beam opens new perspectives in this field. With E-beam technology it is possible to transfer heat-sensitive (plastic), pre-sterilised materials at high speed, continuously into an aseptic area. E-Beam unifies three different technologies, that result in a very efficient and high-speed decontamination machine designed for the pharmaceutical industry. First, there is the electron beam that decontaminates the goods and an accurate shielding that protects the surrounding from this beam. Second, there is the conveyor system that guarantees the output and the correct exposure time underneath the beam. And third, there is the isolator interface to provide correct differential pressure and clean air inside the tunnel as well as the decontamination of the tunnel with H 2 O 2 prior to production. The E-beam is a low-energy electron beam, capable of decontaminating any kind of surface. It penetrates only a few micrometers into the material and therefore does not deform the packaging media. Currently, machines are being built to transfer pre-sterilised syringes, packed in plastic tubs with a Tyvek cover into an aseptic filling isolator with the following data: decontamination efficiency of 10 6 (6 log spore

Total Isolation Status Monitoring and Management System by CAD Assisted Technology

International Nuclear Information System (INIS)

Nakamura, Masaaki

1995-01-01

Isolation tasks in a nuclear power station require high confidence and quick response particularly during the annual inspection when the equipment must be checked in a safe and planned manner. To realize these advanced isolation works, JAPC has developed TOtal Isolation Status Monitoring and Management System using CAD Assisted Technology. This system, TOMM-CAT, developed under the concept of 'User friendly advanced man-machine interface', allows planning and management to be performed on a CRT display. TOMM-CAT allows isolation tasks to be performed accurately and efficiently in conjunction with equipment information from the existing Job Order Management System, which runs on the station host computer. (author)

Improved isolation of cadmium from paddy soil by novel technology based on pore water drainage with graphite-contained electro-kinetic geosynthetics.

Science.gov (United States)

Tang, Xianqiang; Li, Qingyun; Wang, Zhenhua; Hu, Yanping; Hu, Yuan; Scholz, Miklas

2018-03-10

Novel soil remediation equipment based on electro-kinetic geosynthetics (EKG) was developed for in situ isolation of metals from paddy soil. Two mutually independent field plot experiments A and B (with and without electric current applied) were conducted. After saturation using ferric chloride (FeCl 3 ) and calcium chloride (CaCl 2 ), soil water drainage capacity, soil cadmium (Cd) removal performance, energy consumption as well as soil residual of iron (Fe) and chloride (Cl) were assessed. Cadmium dissolved in the soil matrix and resulted in a 100% increase of diethylenetriamine-pentaacetic acid (DTPA) extracted phyto-available Cd. The total soil Cd content reductions were 15.20% and 26.58% for groups A and B, respectively, and electric field applications resulted in a 74.87% increase of soil total Cd removal. The electric energy consumption was only 2.17 kWh/m 3 for group B. Drainage by gravity contributed to > 90% of the overall soil dewatering capacity. Compared to conventional electro-kinetic technology, excellent and fast soil water drainage resulted in negligible hydrogen ion (H + ) and hydroxide ion (OH - ) accumulation at nearby electrode zones, which addressed the challenge of anode corrosion and cathode precipitation of soil metals. External addition of FeCl 3 and CaCl 2 caused soil Fe and Cl residuals and led to 4.33-7.59% and 139-172% acceptable augments in soil total Fe and Cl content, correspondingly, if compared to original untreated soils. Therefore, the novel soil remediation equipment developed based on EKG can be regarded as a promising new in situ technology for thoroughly isolating metals from large-scale paddy soil fields.

Use of a viscoelastic model for the seismic response of base-isolated buildings

International Nuclear Information System (INIS)

Uras, R.A.

1994-01-01

Due to recent developments in elastomer technology, seismic isolation using elastomer bearings is rapidly becoming an acceptable design tool to enhance structural seismic margins and to protect people and equipment from earthquake damage. With proper design of isolators, high-energy seismic input motions are transformed into low-frequency, low energy harmonic motions and the accelerations acting on the isolated building are significantly reduced. Several alternatives exist for the modeling of the isolators. This study is concerned with the use of a viscoelastic model to predict the seismic response of base-isolated buildings. The in-house finite element computer code has been modified to incorporate a viscoelastic spring element, and several simulations are performed. Then, the computed results have been compared with the corresponding observed data recorded at the test facility

Remote communications technology redefines integrity verification and monitoring of low pressure isolation

Energy Technology Data Exchange (ETDEWEB)

Anon.

2010-01-15

In 2007, a ship collided with the southeast face of a satellite platform jacket in the North Sea, damaging the 12-inch export riser. Emergency shutdown valves immediately shut-in production from the platform, leaving the pressure in the pipeline at approximately 4 barg. The riser had to be repaired before production could resume. TDW Offshore Services (TDW) was hired to develop a low pressure solution to isolate the damaged section of the pipeline riser from the export pipeline gas inventory. TDW used its range of specialist pipeline pigging, pig tracking and remote communications technology to solve the problem. The solution consisted of a custom-designed TDW pig trap and pigging spread; a high friction pig train furnished with the SmartTrack remote tracking and pressure-monitoring system; a SmartTrack subsea remote tracking and pressure-monitoring system; a SmartTrack topside tracking and monitoring system with radio link to the dive support vessel; and a pipeline isolation ball valve. TDW was able to monitor the downstream pressure of each isolation pig continuously throughout the operation using its innovative technology that sends isolation integrity data by radio link to a dive support vessel through pipe wall communications. The use of remote tracking and pressure monitoring technology enabled TDW to make repairs to the damaged riser while maintaining a continuous flow throughout the duration of the operation. 4 figs.

Technological properties of bacteriocin-producing lactic acid bacteria isolated from Pico cheese an artisanal cow's milk cheese.

Science.gov (United States)

Ribeiro, S C; Coelho, M C; Todorov, S D; Franco, B D G M; Dapkevicius, M L E; Silva, C C G

2014-03-01

Evaluate technologically relevant properties from bacteriocin-producing strains to use as starter/adjunct cultures in cheese making. Eight isolates obtained from Pico cheese produced in Azores (Portugal) were found to produce bacteriocins against Listeria monocytogenes and three isolates against Clostridium perfringens. They were identified as Lactococcus lactis and Enterococcus faecalis and submitted to technological tests: growth at different conditions of temperature and salt, acid production, proteolysis, lipolysis, coexistence, enzymatic profile and autolytic capacity. Safety evaluation was performed by evaluating haemolytic, gelatinase and DNase activity, resistance to antibiotics and the presence of virulence genes. Some isolates presented good technological features such as high autolytic activity, acid and diacetyl production. Lactococcus lactis was negative for all virulence genes tested and inhibit the growth of all Lactic acid bacteria (LAB) isolates. Enterococci were positive for the presence of some virulence genes, but none of the isolates were classified as resistant to important antibiotics. The bacteriocin-producing Lc. lactis present good potential for application in food as adjunct culture in cheese production. The study also reveals good technological features for some Enterococcus isolates. Bacteriocin-producing strains presented important technological properties to be exploited as new adjunct culture for the dairy industry, influencing flavour development and improve safety. © 2013 The Society for Applied Microbiology.

Classification of large circulating tumor cells isolated with ultra-high throughput microfluidic Vortex technology

Science.gov (United States)

Che, James; Yu, Victor; Dhar, Manjima; Renier, Corinne; Matsumoto, Melissa; Heirich, Kyra; Garon, Edward B.; Goldman, Jonathan; Rao, Jianyu; Sledge, George W.; Pegram, Mark D.; Sheth, Shruti; Jeffrey, Stefanie S.; Kulkarni, Rajan P.; Sollier, Elodie; Di Carlo, Dino

2016-01-01

Circulating tumor cells (CTCs) are emerging as rare but clinically significant non-invasive cellular biomarkers for cancer patient prognosis, treatment selection, and treatment monitoring. Current CTC isolation approaches, such as immunoaffinity, filtration, or size-based techniques, are often limited by throughput, purity, large output volumes, or inability to obtain viable cells for downstream analysis. For all technologies, traditional immunofluorescent staining alone has been employed to distinguish and confirm the presence of isolated CTCs among contaminating blood cells, although cells isolated by size may express vastly different phenotypes. Consequently, CTC definitions have been non-trivial, researcher-dependent, and evolving. Here we describe a complete set of objective criteria, leveraging well-established cytomorphological features of malignancy, by which we identify large CTCs. We apply the criteria to CTCs enriched from stage IV lung and breast cancer patient blood samples using the High Throughput Vortex Chip (Vortex HT), an improved microfluidic technology for the label-free, size-based enrichment and concentration of rare cells. We achieve improved capture efficiency (up to 83%), high speed of processing (8 mL/min of 10x diluted blood, or 800 μL/min of whole blood), and high purity (avg. background of 28.8±23.6 white blood cells per mL of whole blood). We show markedly improved performance of CTC capture (84% positive test rate) in comparison to previous Vortex designs and the current FDA-approved gold standard CellSearch assay. The results demonstrate the ability to quickly collect viable and pure populations of abnormal large circulating cells unbiased by molecular characteristics, which helps uncover further heterogeneity in these cells. PMID:26863573

Bridging the Gap: Use of Spaceflight Technologies for Earth-Based Problems

Science.gov (United States)

Brinley, Alaina; Vidlak, Carissa; Davis, Jeffrey R.

2012-01-01

Spaceflight is colloquially deemed, the final frontier, or the last area which humans have not yet explored in great depth. While this is true, there are still many regions on Earth that remain isolated from the urban, socially and electronically connected world. Because travelling to space requires a great deal of foresight, engineers are required to think creatively in order to invent technologies that are durable enough to withstand the rigors of the unique and often treacherous environment of outer space. The innovations that are a result of spaceflight designs can often be applied to life on Earth, particularly in the rural, isolated communities found throughout the world. The NASA Human Health and Performance Center (NHHPC) is a collaborative, virtual forum that connects businesses, non-profit organizations, academia, and government agencies to allow for better distribution of ideas and technology between these entities (http://www.nasa.gov/offices/NHHPC). There are many technologies that have been developed for spaceflight that can be readily applied to rural communities on Earth. For example, water filtration systems designed for spaceflight must be robust and easily repaired; therefore, a system with these qualifications may be used in rural areas on Earth. This particular initiative seeks to connect established, non-profit organizations working in isolated communities throughout the world with NASA technologies devised for spaceflight. These technologies could include water purification systems, solar power generators, or telemedicine techniques. Applying innovative, spaceflight technologies to isolated communities on Earth provides greater benefits from the same research dollars, thus fulfilling the Space Life Science motto at Johnson Space Center: Exploring Space and Enhancing Life. This paper will discuss this NHHPC global outreach initiative and give examples based on the recent work of the organization.

Study on three dimensional seismic isolation system

International Nuclear Information System (INIS)

Morishita, Masaki; Kitamura, Seiji

2003-01-01

Japan Nuclear Cycle Development Institute (JNC) and Japan Atomic Power Company (JAPC) launched joint research programs on structural design and three-dimensional seismic isolation technologies, as part of the supporting R and D activities for the feasibility studies on commercialized fast breeder reactor cycle systems. A research project by JAPC under the auspices of the Ministry of Economy, Trade, and Industry (METI) with technical support by JNC is included in this joint study. This report contains the results of the research on the three-dimensional seismic isolation technologies, and the results of this year's study are summarized in the following five aspects. (1) Study on Earthquake Condition for Developing 3-dimensional Base Isolation System. The case study S2 is one of the maximum ground motions, of which the records were investigated up to this time. But a few observed near the fault exceed the case study S2 in the long period domain, depending on the fault length and conditions. Generally it is appropriate that the response spectra ratio (vertical/horizontal) is 0.6. (2) Performance Requirement for 3-dimensional Base Isolation System and Devices. Although the integrity map of main equipment/piping dominate the design criteria for the 3-dimensional base isolation system, the combined integrity map is the same as those of FY 2000, which are under fv=1Hz and over hv=20%. (3) Developing Targets and Schedule for 3-dimensional Isolation Technology. The target items for 3-dimensional base isolation system were rearranged into a table, and developing items to be examined concerning the device were also adjusted. A development plan until FY 2009 was made from the viewpoint of realization and establishment of a design guideline on 3-dimensional base isolation system. (4) Study on 3-dimensional Entire Building Base Isolation System. Three ideas among six ideas that had been proposed in FY2001, i.e., '3-dimensional base isolation system incorporating hydraulic

FSI-based Overflow Assessment of the Seismically-Isolated SFP with Fuel Racks

Energy Technology Data Exchange (ETDEWEB)

Chung, Gil Y.; Park, Hyun T.; Chang, Soo-Hyuk [Korea Maintenance Co., Seoul (Korea, Republic of); Lee, Sang-Hoon [KEPCO E-C, Yongin (Korea, Republic of)

2014-10-15

To date, effectiveness of the seismic isolation systems for reducing seismic force effectively has been well demonstrated. In this context, practical application of the technology in nuclear engineering fields has become an important issue more and more. This is because fluid motion can be rather amplified due to the increased relative displacement between the base and superstructures by a long-period shift. Therefore, overflow assessment and prediction of the seismically-isolated SFP have to be conducted in design phase. For performing sloshing-induced overflow of the seismically-isolated SFP, a fluid-structure interaction(FSI) approach making a two-way coupling process between structural and fluid solvers is herein employed. In this study, fuel racks inside the SFP are included in FSI modeling to investigate effect of fuel-cell assemblies on SFP overflow. Accordingly, three different assembly sets of fuel cells are assumed to be inserted in fuel racks. In addition, floor acceleration time-histories produced from three different amplitudes of peak ground acceleration (PGA) are applied to the SFP base to investigate load effect on liquid overflow. An approach for the liquid overflow assessment of the seismically-isolated nuclear SFP with fuel storage racks based on FSI analysis was addressed. From the results of the identified cases, the following conclusions are drawn: (i) FSI technique can be effectively used to assess the seismically-isolated SFP overflow, (ii) In a conservative way, the isolated SFP without fuel racks can be used to assess its sloshing-induced overflow under earthquake since effect of fuel-cell assemblies on the SFP overflow is not significant, (iii) for given same conditions (e.g., constant design free surface, same fuel-cell assembly) except seismic loading, the higher PGA is, the more liquid overflow increases.

Semi-active control of magnetorheological elastomer base isolation system utilising learning-based inverse model

Science.gov (United States)

Gu, Xiaoyu; Yu, Yang; Li, Jianchun; Li, Yancheng

2017-10-01

Magnetorheological elastomer (MRE) base isolations have attracted considerable attention over the last two decades thanks to its self-adaptability and high-authority controllability in semi-active control realm. Due to the inherent nonlinearity and hysteresis of the devices, it is challenging to obtain a reasonably complicated mathematical model to describe the inverse dynamics of MRE base isolators and hence to realise control synthesis of the MRE base isolation system. Two aims have been achieved in this paper: i) development of an inverse model for MRE base isolator based on optimal general regression neural network (GRNN); ii) numerical and experimental validation of a real-time semi-active controlled MRE base isolation system utilising LQR controller and GRNN inverse model. The superiority of GRNN inverse model lays in fewer input variables requirement, faster training process and prompt calculation response, which makes it suitable for online training and real-time control. The control system is integrated with a three-storey shear building model and control performance of the MRE base isolation system is compared with bare building, passive-on isolation system and passive-off isolation system. Testing results show that the proposed GRNN inverse model is able to reproduce desired control force accurately and the MRE base isolation system can effectively suppress the structural responses when compared to the passive isolation system.

Investigation of base isolation for fast breeder reactor building

International Nuclear Information System (INIS)

Morishita, M.; Kobatake, M.; Ohta, K.; Okada, Y.

1989-01-01

Achievement of great rationalization for seismic-resistant design of equipment system is necessary and indispensable from the viewpoints of economical and structural validity for a fast breeder reactor to be made practical. The method of reducing seismic loads on the building and equipment by application of base isolation may be an effective method, but in application to nuclear facilities, it will become necessary to examine the feasibility to actual design considering the severe seismic design requirements in Japan. With these considerations as the background, the authors carried out analytical studies from various viewpoints such as restoring force characteristics of base isolation device, influence of input earthquake motion, soil-structure interaction in base- isolated structure, etc. in case of providing base isolation system for a fast breeder reactor building. Based on these analytical studies, vibration tests on a base-isolated structure using a triaxial shaking table and simulation analyses of the tests were performed attempting to verify the effectiveness of the base isolation system and appropriateness of the analysis method. Results are presented

Status of technologies related to the isolation of radioactive wastes in geologic repositories

Energy Technology Data Exchange (ETDEWEB)

Irish, E R [International Atomic Energy Agency, Vienna (Austria). Div. of Nuclear Safety and Environmental Protection; Cooley, C R [Department of Energy, Washington, DC (USA). Office of Nuclear Waste Management

1980-09-01

The authors present an overview of the status of technologies relevant to the isolation of radioactive wastes in geologic repositories. In addition to summarizing scientific and technical work on waste forms and packages, the: a) importance of the systems viewpoint, b) importance of modeling, c) need for site-specific investigations, d) consideration of future sub-surface human activities and e) prospects for successful isolation are discussed. It is concluded that successful isolation of radioactive wastes from the biosphere appears technically feasible for periods of thousands of years provided that the systems view is used in repository siting and design.

Technology development of p-type microstrip detectors with radiation hard p-spray isolation

International Nuclear Information System (INIS)

Pellegrini, G.; Fleta, C.; Campabadal, F.; Diez, S.; Lozano, M.; Rafi, J.M.; Ullan, M.

2006-01-01

A technology for the fabrication of p-type microstrip silicon radiation detectors using p-spray implant isolation has been developed at CNM-IMB. The p-spray isolation has been optimized in order to withstand a gamma irradiation dose up to 50 Mrad (Si), which represents the ionization radiation dose expected in the middle region of the SCT-Atlas detector of the future Super-LHC during 10 years of operation. The best technological options for the p-spray implant were found by using a simulation software package and dedicated calibration runs. Using the optimized technology, detectors have been fabricated in the Clean Room facility of CNM-IMB, and characterized by reverse current and capacitance measurements before and after irradiation. The average full depletion voltage measured on the non-irradiated detectors was V FD =41±3 V, while the leakage current density for the microstrip devices at V FD +20 V was 400 nA/cm 2

Cancer Inhibitors Isolated from an African Plant | NCI Technology Transfer Center | TTC

Science.gov (United States)

The National Cancer Institute's Molecular Targets Development Program is seeking parties interested in collaborative research to further develop, evaluate, or commercialize cancer inhibitors isolated from the African plant Phyllanthus englerii. The technology is also available for exclusive or non-exclusive licensing.

Equipment response spectra for base-isolated shear beam structures

International Nuclear Information System (INIS)

Ahmadi, G.; Su, L.

1992-01-01

Equipment response spectra in base-isolated structure under seismic ground excitations are studied. The equipment is treated as a single-degree-of-freedom system attached to a nonuniform elastic beam structural model. Several leading base isolation systems, including the laminated rubber bearing, the resilient-friction base isolator with and without a sliding upper plate, and the EDF system are considered. Deflection and acceleration response spectra for the equipment and the shear beam structure subject to a sinusoidal and the accelerogram of the N00W component of El Centro 1940 earthquake are evaluated. Primary-secondary interaction effects are included in the analysis. Several numerical parametric studies are carried out and the effectiveness of different base isolation systems in protecting the nonstructural components is studied. It is shown that use of properly designed base isolation systems provides considerable protection for secondary systems, as well as, the structure against severe seismic loadings. (orig.)

Performance Based Failure Criteria of the Base Isolation System for Nuclear Power Plants

International Nuclear Information System (INIS)

Kim, Jung Han; Kim, Min Kyu; Choi, In Kil

2013-01-01

The realistic approach to evaluate the failure state of the base isolation system is necessary. From this point of view, several concerns are reviewed and discussed in this study. This is the preliminary study for the performance based risk assessment of a base isolated nuclear power plant. The items to evaluate the capacity and response of an individual base isolator and a base isolation system were briefly outlined. However, the methodology to evaluate the realistic fragility of a base isolation system still needs to be specified. For the quantification of the seismic risk for a nuclear power plant structure, the failure probabilities of the structural component for the various seismic intensity levels need to be calculated. The failure probability is evaluated as the probability when the seismic response of a structure exceeds the failure criteria. Accordingly, the failure mode of the structural system caused by an earthquake vibration should be defined first. The type of a base isolator appropriate for a nuclear power plant structure is regarded as an elastometric rubber bearing with a lead core. The failure limit of the lead-rubber bearing (LRB) is not easy to be predicted because of its high nonlinearity and a complex loading condition by an earthquake excitation. Furthermore, the failure mode of the LRB system installed below the nuclear island cannot be simply determined because the basemat can be sufficiently supported if the number of damaged isolator is not much

THK: CLB Crossed Linear Bearing Seismic Isolators

International Nuclear Information System (INIS)

Toniolo, Roberto

2008-01-01

This text highlights the new seismic isolation technology called CLB (Crossed Linear Bearing), which is made of linear guides with recirculating steel ball technology. It describes specifications and building characteristics, provides examples of seismic isolation and application functionalities and shows experimental data. Since 1994, the constant commitment by Japan to develop diversified anti-seismic systems based on the precise needs of the structures to protect and the areas where they were built has led to the creation of important synergy between the research institutions of leading Japanese companies and THK's Centre for Research and Development. Their goal has been to develop new technology and solutions to allow seismic isolation to be effective in the following cases:

The development of base-isolated APWR plants

International Nuclear Information System (INIS)

Tanaka, T.; Nitta, T.

2001-01-01

The full text follows: The seismic design of nuclear power stations plays a critical role in the assurance of plant safety in Japan, and standardization of design is difficult to achieve because every site is subject to different seismic conditions. However, the introduction of seismic -isolation devices is one way to rationally achieve safety assurance and promote design standardization. Base-isolated APWR (advanced pressurized water reactor) plants were developed by applying seismic -isolation devices to APWR plants. The introduction of seismic -isolation devices, which are installed between the ground and buildings, largely decreases the effect of seismic force on buildings. Therefore, the limitation of building shape and eccentricity, which are undertaken in order to prevent the floating of buildings, could be eliminated. This permits the flexibility of building layouts, which result in a reduction of building volume. At the same time, the thickness of the buildings walls that are specific to nuclear power stations, can also be decreased except radiation shield. As for the base-isolated APWR equipment design, the rational design of support structures for equipment and pipings is possible, because the floor response acceleration is greatly reduced. For the cost reduction, it has been confirmed that the base-isolated APWR plants are more economical than traditional APWR plants even after the additionally required expenses for seismic-isolation devices are taken into account. This is primarily because of the rational design of the buildings and equipment which is possible as described above. Another advantage is that building standardization can be promoted because the seismic-isolation devices are able to control the seismic force transmitted to the buildings. This is accomplished by arranging the characteristics of the isolation devices according to the seismic conditions of each site. The introduction of these devices to nuclear power stations is nearly ready

Base isolation for nuclear power and nuclear material facilities

International Nuclear Information System (INIS)

Eidinger, J.M.; Kircher, C.A.; Vaidya, N.; Constantinou, M.; Kelly, J.M.; Seidensticker, R.; Tajirian, F.F.; Ovadia, D.

1989-01-01

This report serves to document the status of the practice for the use of base isolation systems in the design and construction of nuclear power and nuclear material facilities. The report first describes past and current (1989) applications of base isolation in nuclear facilities. The report then provides a brief discussion of non-nuclear applications. Finally, the report summarizes the status of known base-isolation codes and standards

Development and characterization of a magnetorheological elastomer based adaptive seismic isolator

International Nuclear Information System (INIS)

Li, Yancheng; Li, Jianchun; Samali, Bijan; Li, Weihua

2013-01-01

One of the main shortcomings in current base isolation design/practice is lack of adaptability. As a result, a base isolation system that is effective for one type earthquake may become ineffective or may have adverse effect for other earthquakes. The vulnerability of traditional base isolation systems can be exaggerated by two types of earthquakes, i.e. near-field earthquakes and far-field earthquakes. This paper addresses the challenge facing current base isolation design/practice by proposing a new type of seismic isolator for the base isolation system, namely an adaptive seismic isolator. The novel adaptive seismic isolator utilizes magnetorheological elastomer (MRE) for its field-sensitive material property. Traditional seismic isolator design with a unique laminated structure of steel and MRE layers has been adopted in the novel MRE seismic isolator. To evaluate and characterize the behavior of the MRE seismic isolator, experimental testing was conducted on a shake table facility under harmonic cycling loading. Experimental results show that the proposed adaptive seismic isolator can successfully alter the lateral stiffness and damping force in real time up to 37% and 45% respectively. Based on the successful development of the novel adaptive seismic isolator, a discussion is also extended to the impact and potential applications of such a device in structural control applications in civil engineering. (paper)

The Effect of Information Communication Technology Interventions on Reducing Social Isolation in the Elderly: A Systematic Review.

Science.gov (United States)

Chen, Yi-Ru Regina; Schulz, Peter J

2016-01-28

The aging of the population is an inexorable change that challenges governments and societies in every developed country. Based on clinical and empirical data, social isolation is found to be prevalent among elderly people, and it has negative consequences on the elderly's psychological and physical health. Targeting social isolation has become a focus area for policy and practice. Evidence indicates that contemporary information and communication technologies (ICT) have the potential to prevent or reduce the social isolation of elderly people via various mechanisms. This systematic review explored the effects of ICT interventions on reducing social isolation of the elderly. Relevant electronic databases (PsycINFO, PubMed, MEDLINE, EBSCO, SSCI, Communication Studies: a SAGE Full-Text Collection, Communication & Mass Media Complete, Association for Computing Machinery (ACM) Digital Library, and IEEE Xplore) were systematically searched using a unified strategy to identify quantitative and qualitative studies on the effectiveness of ICT-mediated social isolation interventions for elderly people published in English between 2002 and 2015. Narrative synthesis was performed to interpret the results of the identified studies, and their quality was also appraised. Twenty-five publications were included in the review. Four of them were evaluated as rigorous research. Most studies measured the effectiveness of ICT by measuring specific dimensions rather than social isolation in general. ICT use was consistently found to affect social support, social connectedness, and social isolation in general positively. The results for loneliness were inconclusive. Even though most were positive, some studies found a nonsignificant or negative impact. More importantly, the positive effect of ICT use on social connectedness and social support seemed to be short-term and did not last for more than six months after the intervention. The results for self-esteem and control over one's life

Phylogenetic relationships of Chaetomium isolates based on the ...

African Journals Online (AJOL)

Molecular characterization of 18 Chaetomium isolates collected from India based on the internal transcribed spacer (ITS) region of the rRNA gene sequences was done. Phylogenetic analysis of full length ITS region showed that Chaetomium globosum isolates, Cg1, Cg2, Cg6, Cg11 and Cg15, Chaetomium spp. isolates, ...

Analysis and Design of Reinforced Concrete Structures With Spring Base Isolation

International Nuclear Information System (INIS)

Tun Myint Aung; Tin Tin Win, Nyan Myint Kyaw

2008-06-01

In the study, analysis and design of four storey reinforced concrete building and it's isolations which is located in seismic zone 4. Then comparison of analysis result between fixed base condition and isolated condition of the building due to multi direction earthquake motions such as horizontal and vertical earthquake. Firstaly, static analysis is used for fixed base condition due to gravity unfactored load to design the helical spring. Secondly spectrum analysis is only utilized for horizontal earthquake and time history analysis is used for both horizontal earthquake and vertical earthquake respectively. Finally, comparison of the analysis results as forces, displacements, drifts, accelerations and shear at various levels of building are presented. The static period of fixed base is 0.4 sec. According to the base isolated concept, base isolated period is lengthened to 0.8 sec, 1 sec and 1.2sec for design earthquake level. The results which are especially compared to base isolated (1.2 sec) and fixed base building show that the displacements of base isolated is more than fixed base building but other seismic response such as acceleration of base isolated is significantly reduced compared to fixed base as well as base isloated building has capacity for reducing of member force of the structure with fixed base building

Seismic response of base isolated auxiliary building with age related degradation

International Nuclear Information System (INIS)

Park, Jun Hee; Choun, Young Sun; Choi, In Kil

2012-01-01

The aging of an isolator affects not only the mechanical properties of the isolator but also the dynamic properties of the upper structure, such as the change in stiffness, deformation capacity, load bearing capacity, creep, and damping. Therefore, the seismic response of base isolated structures will change with time. The floor response in the base isolated nuclear power plants (NPPs) can be particularly changed because of the change in stiffness and damping for the isolator. The increased seismic response due to the aging of isolator can cause mechanical problems for many equipment located in the NPPs. Therefore, it is necessary to evaluate the seismic response of base isolated NPPs with age related degradation. In this study, the seismic responses for a base isolated auxiliary building of SHIN KORI 3 and 4 with age related degradation were investigated using a nonlinear time history analysis. Floor response spectrums (FRS) were presented with time for identifying the change in seismic demand under the aging of isolator

Seismic performance evaluation of an MR elastomer-based smart base isolation system using real-time hybrid simulation

International Nuclear Information System (INIS)

Eem, S H; Jung, H J; Koo, J H

2013-01-01

Recently, magneto-rheological (MR) elastomer-based base isolation systems have been actively studied as alternative smart base isolation systems because MR elastomers are capable of adjusting their modulus or stiffness depending on the magnitude of the applied magnetic field. By taking advantage of the MR elastomers’ stiffness-tuning ability, MR elastomer-based smart base isolation systems strive to alleviate limitations of existing smart base isolation systems as well as passive-type base isolators. Until now, research on MR elastomer-based base isolation systems primarily focused on characterization, design, and numerical evaluations of MR elastomer-based isolators, as well as experimental tests with simple structure models. However, their applicability to large civil structures has not been properly studied yet because it is quite challenging to numerically emulate the complex behavior of MR elastomer-based isolators and to conduct experiments with large-size structures. To address these difficulties, this study employs the real-time hybrid simulation technique, which combines physical testing and computational modeling. The primary goal of the current hybrid simulation study is to evaluate seismic performances of an MR elastomer-based smart base isolation system, particularly its adaptability to distinctly different seismic excitations. In the hybrid simulation, a single-story building structure (non-physical, computational model) is coupled with a physical testing setup for a smart base isolation system with associated components (such as laminated MR elastomers and electromagnets) installed on a shaking table. A series of hybrid simulations is carried out under two seismic excitations having different dominant frequencies. The results show that the proposed smart base isolation system outperforms the passive base isolation system in reducing the responses of the structure for the excitations considered in this study. (paper)

Comparison of SNP-based subtyping workflows for bacterial isolates using WGS data, applied to Salmonella enterica serotype Typhimurium and serotype 1,4,[5],12:i:-

Science.gov (United States)

Saltykova, Assia; Wuyts, Véronique; Mattheus, Wesley; Bertrand, Sophie; Roosens, Nancy H. C.; Marchal, Kathleen

2018-01-01

Whole genome sequencing represents a promising new technology for subtyping of bacterial pathogens. Besides the technological advances which have pushed the approach forward, the last years have been marked by considerable evolution of the whole genome sequencing data analysis methods. Prior to application of the technology as a routine epidemiological typing tool, however, reliable and efficient data analysis strategies need to be identified among the wide variety of the emerged methodologies. In this work, we have compared three existing SNP-based subtyping workflows using a benchmark dataset of 32 Salmonella enterica subsp. enterica serovar Typhimurium and serovar 1,4,[5],12:i:- isolates including five isolates from a confirmed outbreak and three isolates obtained from the same patient at different time points. The analysis was carried out using the original (high-coverage) and a down-sampled (low-coverage) datasets and two different reference genomes. All three tested workflows, namely CSI Phylogeny-based workflow, CFSAN-based workflow and PHEnix-based workflow, were able to correctly group the confirmed outbreak isolates and isolates from the same patient with all combinations of reference genomes and datasets. However, the workflows differed strongly with respect to the SNP distances between isolates and sensitivity towards sequencing coverage, which could be linked to the specific data analysis strategies used therein. To demonstrate the effect of particular data analysis steps, several modifications of the existing workflows were also tested. This allowed us to propose data analysis schemes most suitable for routine SNP-based subtyping applied to S. Typhimurium and S. 1,4,[5],12:i:-. Results presented in this study illustrate the importance of using correct data analysis strategies and to define benchmark and fine-tune parameters applied within routine data analysis pipelines to obtain optimal results. PMID:29408896

Seismic Risk of the Base Isolation System Protected by the Hard Stop

International Nuclear Information System (INIS)

Kim, Jung Han; Choi, In-Kil; Kim, Min Kyu

2015-01-01

The concept of base isolation is to permit the deformation of isolator for absorbing seismic input wave from the ground. In a nuclear power plant design, allowable shear deformation of isolators should be enough to absorb the displacement response by extended design basis (EDB) ground motions. However isolators cannot resist over its displacement capacity. So, the clearance of hard stop (CHS) needs to be set between the response of base isolation system excited by the EDB ground motion and the displacement capacity of isolators. The isolation system must survive with high confidence in any seismic accident because it is a non-redundant system. Therefore, the CHS should be determined carefully based on the failure risk of base isolation system considering the uncertainties of earthquake responses and isolator capacities. In this research, the fragility curve of isolation system and its failure risk were estimated. The procedure to calculate the acceleration based fragility curve of the isolation system was developed. The fragility curve and failure risk for example case was estimated and its result was compared with different isolator capacities

Seismic Risk of the Base Isolation System Protected by the Hard Stop

Energy Technology Data Exchange (ETDEWEB)

Kim, Jung Han; Choi, In-Kil; Kim, Min Kyu [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

The concept of base isolation is to permit the deformation of isolator for absorbing seismic input wave from the ground. In a nuclear power plant design, allowable shear deformation of isolators should be enough to absorb the displacement response by extended design basis (EDB) ground motions. However isolators cannot resist over its displacement capacity. So, the clearance of hard stop (CHS) needs to be set between the response of base isolation system excited by the EDB ground motion and the displacement capacity of isolators. The isolation system must survive with high confidence in any seismic accident because it is a non-redundant system. Therefore, the CHS should be determined carefully based on the failure risk of base isolation system considering the uncertainties of earthquake responses and isolator capacities. In this research, the fragility curve of isolation system and its failure risk were estimated. The procedure to calculate the acceleration based fragility curve of the isolation system was developed. The fragility curve and failure risk for example case was estimated and its result was compared with different isolator capacities.

Earthquake response analysis of a base isolated building

International Nuclear Information System (INIS)

Mazda, T.; Shiojiri, H.; Sawada, Y.; Harada, O.; Kawai, N.; Ontsuka, S.

1989-01-01

Recently, the seismic isolation has become one of the popular methods in the design of important structures or equipments against the earthquakes. However, it is desired to accumulate the demonstration data on reliability of seismically isolated structures and to establish the analysis methods of those structures. Based on the above recognition, the vibration tests of a base isolated building were carried out in Tsukuba Science City. After that, many earthquake records have been obtained at the building. In order to examine the validity of numerical models, earthquake response analyses have been executed by using both lumped mass model, and finite element model

Earthquake response observation of isolated buildings

International Nuclear Information System (INIS)

Harada, O.; Kawai, N.; Ishii, T.; Sawada, Y.; Shiojiri, H.; Mazda, T.

1989-01-01

Base isolation system is expected to be a technology for a rational design of FBR plant. In order to apply this system to important structures, accumulation of verification data is necessary. From this point of view, the vibration test and the earthquake response observation of the actual isolated building using laminated rubber bearings and elasto-plastic steel dampers were conducted for the purpose of investigating its dynamic behavior and of proving the reliability of the base isolation system. Since September in 1986, more than thirty earthquakes have been observed. This paper presents the results of the earthquake response observation

Peak-Broadening of Floor Response Spectra for Base Isolated Nuclear Structures

International Nuclear Information System (INIS)

Ju, Heekun; Choun, Young-Sun; Kim, Min-Kyu

2015-01-01

In this paper, uncertainties in developing FRS are explained first. Then FDRS of a fixed structure is computed using a conventional method as an example. Lastly FRS of a base-isolated structure is computed and suitability of current peak-broadening method is examined. Uncertainties in the material property of structure influence FRS of fixed structures significantly, but their effect on FRS of base-isolated structures is negligible. Nuclear structures should be designed to ensure the safety of equipment and components mounted on their floors. However, coupled analysis of a structure and components is complex, so equipment is separately analyzed using floor response spectra (FRS). FRS calculated from dynamic analysis of structural model should be modified to create floor design response spectra (FDRS), the input for seismic design of equipment. For nuclear structures, smoothing and broadening peaks of FRS is required to account for uncertainties owing to material properties of structures, soil, modeling techniques, and others. The peak broadening method proposed for fixed based structures may not be appropriate for base-isolated structures because of additional uncertainties in the property of isolation bearings. For base-isolated structures, mechanical property of isolator plays a dominant role on the change of FRS. As base-isolated nuclear plants should meet the ASCE provisions, uncertainty in the isolation system would be around 10%. For the base isolated 3-storied beam model with 2.5-sec isolation period, 6.9% of broadening ratio was enough for development of FDRS at the required variation condition. Also for the models with various isolation periods, less than 10% of broadening ratio was sufficient

A European collaboration research programme to study and test large scale base isolated structures

International Nuclear Information System (INIS)

Renda, V.; Verzeletti, G.; Papa, L.

1995-01-01

The improvement of the technology of innovative anti-seismic mechanisms, as those for base isolation and energy dissipation, needs of testing capability for large scale models of structures integrated with these mechanisms. These kind experimental tests are of primary importance for the validation of design rules and the setting up of an advanced earthquake engineering for civil constructions of relevant interest. The Joint Research Centre of the European Commission offers the European Laboratory for Structural Assessment located at Ispra - Italy, as a focal point for an international european collaboration research programme to test large scale models of structure making use of innovative anti-seismic mechanisms. A collaboration contract, opened to other future contributions, has been signed with the national italian working group on seismic isolation (Gruppo di Lavoro sull's Isolamento Sismico GLIS) which includes the national research centre ENEA, the national electricity board ENEL, the industrial research centre ISMES and producer of isolators ALGA. (author). 3 figs

The implementation of base isolation in the United States

International Nuclear Information System (INIS)

Kelly, J.M.

1993-01-01

The concept of base isolation as an innovative means of providing earthquake resistance to structural systems was met initially with a great deal of skepticism by the engineering community. Today, however, it is on the cutting edge of seismic-resistance engineering, as evidenced by the rapidly increasing number of buildings, both new construction and retrofit, using this earthquake-resistant technique. It is now generally accepted that a base-isolated building will perform better than a conventional fixed-base building in moderate or strong earthquakes. In the structures in which it has been used so far, the major benefit has been to reduce the effects of seismic forces on contents and internal equipment, more than justifying the increased cost of isolated construction. This review will mainly cover the development and application of base isolation to buildings in the US. The acceptance of this approach has been slow, but as a result of the 1989 Loma Prieta earthquake there is an increasing interest in its use for repair of buildings damaged in that earthquake and for the retrofit of historic buildings that are considered vulnerable to earthquake loading. Base isolation may play a major role in the future in projects as diverse as advanced nuclear reactors and public housing in developing countries

Keep in touch (KIT): perspectives on introducing internet-based communication and information technologies in palliative care.

Science.gov (United States)

Guo, Qiaohong; Cann, Beverley; McClement, Susan; Thompson, Genevieve; Chochinov, Harvey Max

2016-08-02

Hospitalized palliative patients need to keep in touch with their loved ones. Regular social contact may be especially difficult for individuals on palliative care in-patient units due to the isolating nature of hospital settings. Technology can help mitigate isolation by facilitating social connection. This study aimed to explore the acceptability of introducing internet-based communication and information technologies for patients on a palliative care in-patient unit. In the first phase of the Keep in Touch (KIT) project, a diverse group of key informants were consulted regarding their perspectives on web-based communication on in-patient palliative care units. Participants included palliative patients, family members, direct care providers, communication and information technology experts, and institutional administrators. Data was collected through focus groups, interviews and drop-in consultations, and was analyzed for themes, consensus, and major differences across participant groups. Hospitalized palliative patients and their family members described the challenges of keeping in touch with family and friends. Participants identified numerous examples of ways that communication and information technologies could benefit patients' quality of life and care. Patients and family members saw few drawbacks associated with the use of such technology. While generally supportive, direct care providers were concerned that patient requests for assistance in using the technology would place increased demands on their time. Administrators and IT experts recognized issues such as privacy and costs related to offering these technologies throughout an organization and in the larger health care system. This study affirmed the acceptability of offering internet-based communication and information technologies on palliative care in-patient units. It provides the foundation for trialing these technologies on a palliative in-patient unit. Further study is needed to confirm the

Response of base isolated structure during strong ground motions beyond design earthquakes

International Nuclear Information System (INIS)

Yabana, Shuichi; Ishida, Katsuhiko; Shiojiri, Hiroo

1991-01-01

In Japan, some base isolated structures for fast breeder reactors (FBR) are tried to design. When a base isolated structure are designed, the relative displacement of isolators are generally limited so sa to be remain in linear state of those during design earthquakes. But to estimate safety margin of a base isolated structure, the response of that until the failure must be obtained experimentally to analytically during strong ground motions of beyond design earthquake. The aim of this paper is to investigate the response of a base isolated structure when the stiffness of the isolators hardens and to simulate the response during strong ground motions of beyond design earthquakes. The optimum characteristics of isolators, with which the margin of the structure are increased, are discussed. (author)

The current status of seismic isolation technology in the United States

International Nuclear Information System (INIS)

Kelly, J.M.

1992-01-01

Seismic isolation is at the present time in a very active state of development. Many new types of isolation systems are being explored and elastomeric isolators, the system which has been employed on almost all isolation systems completed to date, continue to undergo improvements. At least one dozen large projects, either new or the retrofit of existing buildings, have been completed and design studies are underway for at least another one dozen large projects. A large experimental research project for isolators with nuclear reactor application has been carried out over the past few years at EERC. This program has involved shake table testing and the testing of full-scale and model isolators. A wide variety of isolators have been tested including low-shape factor, moderate-shape factor, and very high-shape factor elastomer bearings. The range of elastomers that have been tested include low-damping, high-damping, and very low-modulus compounds. Full-size and model isolators have been tested to failure in several failure modes and the safety margins for isolation systems have been established. The test results have shown that properly designed and manufactured isolators for nuclear reactor applications can sustain levels of loading beyond any possible seismic input and demonstrate that failure of an isolation system cannot occur before failure of the isolated structure. Thus, the use of isolation can only have beneficial contributions to the protection of nuclear facilities, internal piping, and equipment. The presentation will review the latest developments in the implementation of base isolation and describe the results of the test program for its application to nuclear facilities. (author)

High-precision pose measurement method in wind tunnels based on laser-aided vision technology

Directory of Open Access Journals (Sweden)

Liu Wei

2015-08-01

Full Text Available The measurement of position and attitude parameters for the isolated target from a high-speed aircraft is a great challenge in the field of wind tunnel simulation technology. In this paper, firstly, an image acquisition method for small high-speed targets with multi-dimensional movement in wind tunnel environment is proposed based on laser-aided vision technology. Combining with the trajectory simulation of the isolated model, the reasonably distributed laser stripes and self-luminous markers are utilized to capture clear images of the object. Then, after image processing, feature extraction, stereo correspondence and reconstruction, three-dimensional information of laser stripes and self-luminous markers are calculated. Besides, a pose solution method based on projected laser stripes and self-luminous markers is proposed. Finally, simulation experiments on measuring the position and attitude of high-speed rolling targets are conducted, as well as accuracy verification experiments. Experimental results indicate that the proposed method is feasible and efficient for measuring the pose parameters of rolling targets in wind tunnels.

Comparison of seismic response of ordinary and base-isolated structures

International Nuclear Information System (INIS)

Kuroda, T.; Kobatake, M.; Seidensticker, R.W.; Chang, Y.W.

1992-01-01

Seismic isolation is growing rapidly worldwide as a cost-effective and reliable design strategy for a wide range of critical and important facilities (e.g., hospitals, computer centers, etc.) Shimizu Corporation of Japan has a test facility at Tohoku University in Sendai, Japan. The test facility was constructed in 1986 and has two buildings: one is base isolated and the other is conventionally founded. The buildings are full-size, three-story reinforced concrete structures. The dimensions and construction of the superstructures are identical. For the past several years, Shimizu Corporation has installed a number of different isolation systems in the isolated building at the test facility to study the response of base isolation systems to actual earthquake motions. Argonne National Laboratory (ANL) has been deeply involved in the development of seismic isolation for use in nuclear facilities for the past decade. Using the funding and direction of the US Department of Energy (USDOE), ANL has been developing methodology needed to evaluate the usefulness and effectiveness of seismic isolation for advanced liquid metal-cooled reactors (LMRs). This paper compares the seismic responses of ordinary and base-isolated buildings. Earthquake records of significant importance from April 1989 to September 1991, after the installation of bearings have been analyzed. Numerical simulations of the building responses have been performed and correlated with earthquake observation data. It is hoped that the results of this study will provide guidelines for the future use of isolator bearings for mitigation of earthquake damages

Students views of integrating web-based learning technology into the nursing curriculum - A descriptive survey.

Science.gov (United States)

Adams, Audrey; Timmins, Fiona

2006-01-01

This paper describes students' experiences of a Web-based innovation at one university. This paper reports on the first phase of this development where two Web-based modules were developed. Using a survey approach (n=44) students' access to and use of computer technology were explored. Findings revealed that students' prior use of computers and Internet technologies was higher than previously reported, although use of databases was low. Skills in this area increased during the programme, with a significant rise in database, email, search engine and word processing use. Many specific computer skills were learned during the programme, with high numbers reporting ability to deal adequately with files and folders. Overall, the experience was a positive one for students. While a sense of student isolation was not reported, as many students kept in touch by phone and class attendance continued, some individual students did appear to isolate themselves. This teaching methodology has much to offer in the provision of convenient easy to access programmes that can be easily adapted to the individual lifestyle. However, student support mechanisms need careful consideration for students who are at risk of becoming isolated. Staff also need to supported in the provision of this methodology and face-to-face contact with teachers for some part of the programme is preferable.

Dielectric isolation for power integrated circuits; Isolation dielectrique enterree pour les circuits integres de puissance

Energy Technology Data Exchange (ETDEWEB)

Zerrouk, D.

1997-07-18

Considerable efforts have been recently directed towards integrating onto the same chip, sense or protection elements that is low voltage analog and/or digital control circuitry together with high voltage/high current devices. Most of these so called `smart power` devices use either self isolation, junction isolation or Silicon-On-Insulator (SOI) to integrate low voltage elements with vertical power devices. Dielectric isolation is superior to the other isolation techniques such as self isolation or junction isolation. Thesis work consists of the study of the feasibility of a dielectric technology based on the melting and the solidification in a Rapid Thermal Processing furnace (RTP), of thick polysilicon films deposited on oxide. The purpose of this technique is to obtain substrate with localized SOI structures for smart power applications. SOI technology offers significant potential advantages, such as non-occurrence of latch-up in CMOS structures, high packaging density, low parasitic capacitance and the possibility of 3D structures. In addition, SOI technology using thick silicon films (10-100 {mu}m) offers special advantages for high voltage integrated circuits. Several techniques have been developed to form SOI films. Zone melting recrystallization is one of the most promising for localized SOI. The SOI structures have first been analyzed in term of extended defects. N-channel MOSFET`s transistors have also been fabricated in the SOI substrates and electrically characterized (threshold voltages, off-state leakage current, mobilities,...). The SOI transistors exhibit good characteristics, although inferior to witness transistors. The recrystallized silicon films are therefore found to be suitable for the fabrication of SOI devices. (author) 106 refs.

The study and analysis of point-to-point vibration isolation and its utility to seismic base isolator

International Nuclear Information System (INIS)

Mehboob, M.; Qureshi, A.S.

2001-01-01

This paper presents systematic approach to regarding the piece wise vibration isolation generally termed as point-to-point vibration isolation system, and its broad spectrum-utilities to an economic seismic base isolation. Transfer of curves for coulomb damped i.e. softening damper flexible mountings are presented and the utility has been proved equally good for both rigidly and elastically coupled damping. It is clearly shown that the very closest solutions are easily obtainable for both slipping and sticking nature of phases of the motion. This eliminates the conventional and conceptual approximations based on the linearization of the damping. This new concept will not endanger-super-structure if mounted on such isolation systems. (author)

Sequential Ground Motion Effects on the Behavior of a Base-Isolated RCC Building

Directory of Open Access Journals (Sweden)

Zhi Zheng

2017-01-01

Full Text Available The sequential ground motion effects on the dynamic responses of reinforced concrete containment (RCC buildings with typical isolators are studied in this paper. Although the base isolation technique is developed to guarantee the security and integrity of RCC buildings under single earthquakes, seismic behavior of base-isolated RCC buildings under sequential ground motions is deficient. Hence, an ensemble of as-recorded sequential ground motions is employed to study the effect of including aftershocks on the seismic evaluation of base-isolated RCC buildings. The results indicate that base isolation can significantly attenuate the earthquake shaking of the RCC building under not only single earthquakes but also seismic sequences. It is also found that the adverse aftershock effect on the RCC can be reduced due to the base isolation applied to the RCC. More importantly, the study indicates that disregarding aftershocks can induce significant underestimation of the isolator displacement for base-isolated RCC buildings.

Economic versus belief-based models: Shedding light on the adoption of novel green technologies

International Nuclear Information System (INIS)

Girod, Bastien; Mayer, Sebastian; Nägele, Florian

2017-01-01

Understanding the determinants for the adoption of novel green consumer technologies is important to effectively foster their diffusion. Energy and environmental science literature often takes an approach based on economic variables such as objectively measureable household and technology characteristics. Increasingly, also subjective variables based on personal belief are considered. On the basis of a survey about the intention to adopt an exemplary novel green consumer technology (intelligent thermostats), we contribute to the clarification of the explanatory power of these two approaches. We first compare the economic model to the belief-based model and second, investigate how beliefs about the green technology are influenced by personal environmental norms and innovativeness. Our evaluation shows that the belief-based model explains considerably higher variance in the intention to adopt. Thereby the perceived hedonic satisfaction, usefulness, habit and facilitating conditions reveal as key determinants. Moreover, environmental norms show lower impact than personal innovativeness. In the discussion we consolidate these findings and point to the risk of omitted variable bias when selectively including belief-based variables in adoption models. Our findings suggest that policies can effectively accelerate the early market diffusion of green consumer technologies by incentivizing retailers to introduce and market such technologies. - Highlights: • Adoption of a green consumer technology (energy-saving thermostats) is evaluated. • Subjective beliefs about the technology show higher impact than objective measures. • Key beliefs relate to pleasure, usefulness, habits and facilitating conditions. • Personal innovativeness is more relevant for adoption than environmental norms. • Isolated use of belief-based adoption determinants can lead to omitted variable bias.

Response of base-isolated nuclear structures to extreme earthquake shaking

Energy Technology Data Exchange (ETDEWEB)

Kumar, Manish, E-mail: mkumar2@buffalo.edu; Whittaker, Andrew S.; Constantinou, Michael C.

2015-12-15

Highlights: • Response-history analysis of nuclear structures base-isolated using lead–rubber bearings is performed. • Advanced numerical model of lead–rubber bearing is used to capture behavior under extreme earthquake shaking. • Results of response-history analysis obtained using simplified and advanced model of lead–rubber bearings are compared. • Heating of the lead core and variation in buckling load and axial stiffness affect the response. - Abstract: Seismic isolation using low damping rubber and lead–rubber bearings is a viable strategy for mitigating the effects of extreme earthquake shaking on safety-related nuclear structures. The mechanical properties of these bearings are not expected to change substantially in design basis shaking. However, under shaking more intense than design basis, the properties of the lead cores in lead–rubber bearings may degrade due to heating associated with energy dissipation, some bearings in an isolation system may experience net tension, and the compression and tension stiffness may be affected by the lateral displacement of the isolation system. The effects of intra-earthquake changes in mechanical properties on the response of base-isolated nuclear power plants (NPPs) are investigated using an advanced numerical model of a lead–rubber bearing that has been verified and validated, and implemented in OpenSees. A macro-model is used for response-history analysis of base-isolated NPPs. Ground motions are selected and scaled to be consistent with response spectra for design basis and beyond design basis earthquake shaking at the site of the Diablo Canyon Nuclear Generating Station. Ten isolation systems of two periods and five characteristic strengths are analyzed. The responses obtained using simplified and advanced isolator models are compared. Strength degradation due to heating of lead cores and changes in buckling load most significantly affect the response of the base-isolated NPP.

Response of base-isolated nuclear structures to extreme earthquake shaking

International Nuclear Information System (INIS)

Kumar, Manish; Whittaker, Andrew S.; Constantinou, Michael C.

2015-01-01

Highlights: • Response-history analysis of nuclear structures base-isolated using lead–rubber bearings is performed. • Advanced numerical model of lead–rubber bearing is used to capture behavior under extreme earthquake shaking. • Results of response-history analysis obtained using simplified and advanced model of lead–rubber bearings are compared. • Heating of the lead core and variation in buckling load and axial stiffness affect the response. - Abstract: Seismic isolation using low damping rubber and lead–rubber bearings is a viable strategy for mitigating the effects of extreme earthquake shaking on safety-related nuclear structures. The mechanical properties of these bearings are not expected to change substantially in design basis shaking. However, under shaking more intense than design basis, the properties of the lead cores in lead–rubber bearings may degrade due to heating associated with energy dissipation, some bearings in an isolation system may experience net tension, and the compression and tension stiffness may be affected by the lateral displacement of the isolation system. The effects of intra-earthquake changes in mechanical properties on the response of base-isolated nuclear power plants (NPPs) are investigated using an advanced numerical model of a lead–rubber bearing that has been verified and validated, and implemented in OpenSees. A macro-model is used for response-history analysis of base-isolated NPPs. Ground motions are selected and scaled to be consistent with response spectra for design basis and beyond design basis earthquake shaking at the site of the Diablo Canyon Nuclear Generating Station. Ten isolation systems of two periods and five characteristic strengths are analyzed. The responses obtained using simplified and advanced isolator models are compared. Strength degradation due to heating of lead cores and changes in buckling load most significantly affect the response of the base-isolated NPP.

Influence of various parameters on effectiveness of seismic base isolation of nuclear equipment

International Nuclear Information System (INIS)

Ebisawa, K.; Kameoka, H.; Takenouchi, I.; Kajiki, S.

1995-01-01

Authors developed a methodology and EBISA code for evaluating the applicability and the effectiveness of seismic base isolation of nuclear equipment. In order to investigate the influence of various parameters on the effectiveness of seismic base isolation, a sensitivity analysis was carried out for an emergency transformer with the base isolation devices. It was proved that seismic base isolation of equipment is very effective. This effectiveness can be influenced by the differences of the base isolation devices and the direction of the input seismic wave. (author). 7 refs., 3 figs., 3 tabs

Analysis, Design, and Construction of a Base-Isolated Multiple Building Structure

Directory of Open Access Journals (Sweden)

Stefano Sorace

2014-01-01

Full Text Available The analysis and design of a multiple residential building, seismically protected by a base isolation system incorporating double friction pendulum sliders as protective devices, are presented in the paper. The building, situated in the suburban area of Florence, is composed of four independent reinforced concrete framed structures, mutually separated by three thermal expansion joints. The plan is L-shaped, with dimensions of about 75 m in the longitudinal direction and about 30 m along the longest side of the transversal direction. These characteristics identify the structure as the largest example of a base-isolated “artificial ground” ever built in Italy. The base isolation solution guarantees lower costs, a much greater performance, and a finer architectural look, as compared to a conventional fixed-base antiseismic design. The characteristics of the building and the isolators, the mechanical properties and the experimental characterization campaign and preliminary sizing carried out on the latter, and the nonlinear time-history design and performance assessment analyses developed on the base isolated building are reported in this paper, along with details about the installation of the isolators and the plants and highlights of the construction works.

ASCS online fault detection and isolation based on an improved MPCA

Science.gov (United States)

Peng, Jianxin; Liu, Haiou; Hu, Yuhui; Xi, Junqiang; Chen, Huiyan

2014-09-01

Multi-way principal component analysis (MPCA) has received considerable attention and been widely used in process monitoring. A traditional MPCA algorithm unfolds multiple batches of historical data into a two-dimensional matrix and cut the matrix along the time axis to form subspaces. However, low efficiency of subspaces and difficult fault isolation are the common disadvantages for the principal component model. This paper presents a new subspace construction method based on kernel density estimation function that can effectively reduce the storage amount of the subspace information. The MPCA model and the knowledge base are built based on the new subspace. Then, fault detection and isolation with the squared prediction error (SPE) statistic and the Hotelling ( T 2) statistic are also realized in process monitoring. When a fault occurs, fault isolation based on the SPE statistic is achieved by residual contribution analysis of different variables. For fault isolation of subspace based on the T 2 statistic, the relationship between the statistic indicator and state variables is constructed, and the constraint conditions are presented to check the validity of fault isolation. Then, to improve the robustness of fault isolation to unexpected disturbances, the statistic method is adopted to set the relation between single subspace and multiple subspaces to increase the corrective rate of fault isolation. Finally fault detection and isolation based on the improved MPCA is used to monitor the automatic shift control system (ASCS) to prove the correctness and effectiveness of the algorithm. The research proposes a new subspace construction method to reduce the required storage capacity and to prove the robustness of the principal component model, and sets the relationship between the state variables and fault detection indicators for fault isolation.

Laser-Based Maintenance and Repair Technologies for Reactor Components

International Nuclear Information System (INIS)

Masaki Yoda; Naruhiko Mukai; Makoto Ochiai; Masataka Tamura; Satoshi Okada; Katsuhiko Sato; Motohiko Kimura; Yuji Sano; Noboru Saito; Seishi Shima; Tetsuo Yamamoto

2004-01-01

Toshiba has developed various laser-based maintenance and repair technologies and applied them to existing nuclear power plants. Laser-based technology is considered to be the best tool for remote processing in nuclear power plants, and particularly so for the maintenance and repair of reactor core components. Accessibility could be drastically improved by a simple handling system owing to the absence of reactive force against laser irradiation and the flexible optical fiber. For the preventive maintenance, laser peening (LP) technology was developed and applied to reactor components in operating BWR plants. LP is a novel process to improve residual stress from tensile to compressive on material surface layer by irradiating focused high-power laser pulses in water. We have developed a fiber-delivered LP system as a preventive maintenance measure against stress corrosion cracking (SCC). Laser ultrasonic testing (LUT) has a great potential to be applied to the remote inspection of reactor components. Laser-induced surface acoustic wave (SAW) inspection system was developed using a compact probe with a multi-mode optical fiber and an interferometer. The developed system successfully detected a micro slit of 0.5 mm depth on weld metal and heat-affected zone (HAZ). An artificial SCC was also detected by the system. We are developing a new LP system combined with LUT to treat the inner surface of bottom-mounted instruments (BMI) of PWR plants. Underwater laser seal welding (LSW) technology was also developed to apply surface crack. LSW is expected to isolate the crack tip from corrosive water environment and to stop the propagation of the crack. Rapid heating and cooling of the process minimize the heat effect, which extends the applicability to neutron-irradiated material. This paper describes recent advances in the development and application of such laser-based technologies. (authors)

Investigational research on CO2 isolation technology in fiscal 1995; 1995 nendo nisanka tanso no kakuri gijutsu ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The paper studied present technical subjects and future study subjects of the CO2 isolation technology in order to clarify technical and social problems and the developmental subjects of the CO2 isolation technology and related technologies for separating/concentrating CO2 emitted in relation to quantity consumption of fossil fuel and storing it in ocean or underground. Main items for the study were: (1) investigational study of the technology of CO2 ocean storage, (2) investigational study of environmental effect assessment in storing CO2 in ocean, (3) investigational study of the technology of CO2 ocean storage, etc. Technologies required for the ocean isolation were arranged such as CO2 storage, injection, dispersion technique, CO2 behavior simulation, and the developmental subjects were extracted. Further, in the deep-sea bottom storage method, a simulation to calculate the range of PH effects was conducted presuming the specified amount of CO2 and applying known physical values, and evaluation of the CO2 ocean discharge/solution method was made. A method was also studied for experiments on water bacteria and benthos. 127 refs., 102 figs., 81 tabs.

Development of safety evaluation guidelines for base-isolated buildings in Japan

International Nuclear Information System (INIS)

Aoyama, Hiroyuki

1989-01-01

This paper describes the safety evaluation guidelines and the review process for non-nuclear base-isolated buildings proposed for construction in Japan. The paper discusses the guidelines application for two types of soil: hard soil and intermediate soil (soft soil was excluded.); safety evaluation items included in the level C design review; and safety margin of base isolation. Lessons learned through these design review efforts have potential applicability to design of seismic base isolation for nuclear power plants

Study on design method for seismically isolated FBR plants

International Nuclear Information System (INIS)

Hirata, Kazuta; Yabana, Shuichi; Ohtori, Yasuki; Ishida, Katsuhiko; Sawada, Yoshihiro; Shiojiri; Hiroo; Mazda, Taiji

1998-01-01

CRIEPI conducted 'Demonstration test on FBR seismic isolation system' from 1987 to 1996 under contract with Ministry of International Trade and Industry, Japan. In the demonstration test, base isolation technologies are prepared and demonstrated to apply to FBR and the design guidelines are proposed. In this report overall contents of the design guidelines entitled Design guidelines for seismically base isolated FBR plants' are included. The design guidelines, as a rule, are limited to apply to FBR plants where entire reactor building is isolated in the horizontal direction using laminated rubber bearings as isolators. The design guidelines and its concepts, however, will be useful for the development of similar guidelines for other isolation systems using different type of isolation methods and other nuclear facilities. The design guidelines consist of three parts and appendices. The first part is 'Policy for Safety Design of Base Isolated FBR Plants' specifying the principles and the requirements in the planning and the design for the safety of base isolated FBR plants. The second part is Policy for Seismic Design of Base Isolated FBR' describing the principles and the requirements in the seismic design and the evaluation of safety for base isolated FBR plants. The third part is 'Design Methods for Seismic Isolated FBR Plants' detailing the methods, procedures and parameters to be used in the design and the evaluation of safety fro base isolated FBR plants. In appendices examples of design procedures for base isolated reactor building and laminated rubber bearings as well as various test data on laminated rubber bearings, etc. are shown. (author)

A Multifunctional Isolated and Non-Isolated Dual Mode Converter for Renewable Energy Conversion Applications

Directory of Open Access Journals (Sweden)

Yiwang Wang

2017-11-01

Full Text Available In this paper, a multifunctional isolated and non-isolated dual-mode low-power converter was designed for renewable energy conversion applications such as photovoltaic power generation to achieve different operating modes under bi-directional electrical conversion. The proposed topology consists of a bidirectional non-isolated DC/DC circuit and an isolated converter with a high-frequency transformer, which merge the advantages of both the conventional isolated converter and non-isolated converter with the combination of the two converter technologies. Compared with traditional converters, the multifunctional converter can not only realize conventional bi-directional functions, but can also be applied for many different operation modes and meet the high output/input ratio demands with the two converter circuits operating together. A novel control algorithm was proposed to achieve the various functions of the proposed converter. An experimental platform based on the proposed circuit was established. Both the simulation and experimental results indicated that the proposed converter could provide isolated and non-isolated modes in different applications, which could meet different practical engineering requirements.

Base isolation strategies for structures and components

International Nuclear Information System (INIS)

Varma, Veto; Reddy, G.R.; Vaze, K.K.; Kushwaha, H.S.

2003-08-01

In the present report the effect of laminated rubber bearing (LRB) system on the dynamic response of the structure was studied. A LRB system was designed and tested in the laboratory for its dynamic characteristics. Finite element analysis was also performed and based on this analysis, isolator for PHWR nuclear power plant was designed. Analysis of the building was performed with and without isolator. Comparison of responses was made in terms of frequencies, accelerations and displacements and floor response spectra. (author)

Coupled vertical-rocking response of base-isolated structures

International Nuclear Information System (INIS)

Pan, T.C.; Kelly, J.M.

1984-01-01

A base-isolated building can have a small horizontal eccentricity between the center of mass of the superstructure and the center of rigidity of the supporting bearings. The structure can be modeled as a rigid block with tributary masses supported on massless rubber bearings placed at a constant elevation below the center of mass. Perturbation methods are implemented to find the dynamic characteristics for both the detuned and the perfectly tuned cases. The Green's functions for the displacement response of the system are derived for the undamped and the damped conditions. The response spectrum modal superposition method is used in estimating the maximum acceleration. A simple method, accounting for the effect of closely spaced modes, is proposed for combining modal maxima and results in an approximate single-degree-of-freedom solution. This approximate solution may be used for thepreliminary design of a base-isolated structure. Numerical results for a base-isolated building subjected to the vertical component of the El Centro earthquake of 1940 were carried out for comparison with analytical results. It is shown that the effect of rocking coupling on the vertical seismic response of baseisolated structures can generally be neglected because of the combined effects of the time lag between the maximum translational and rotational responses and the influence of damping in the isolation system

The control system based on PXI technology for high voltage power supply

International Nuclear Information System (INIS)

Chen Dehong; Zhang Ming; Ma Shaoxiang; Xia Linglong; Zeng Zhen; Zhang Xueliang; Wang Chuliang; Yu Kexun

2014-01-01

A 100 kV/60 A high voltage power supply (HVPS) is being developed to carry some auxiliary heating research on J-TEXT and supply the auxiliary heating system. The power supply which consists of 144 switch modules is based on PSM technology. For the requirement of isolation, control and protection, a control system based on the PCI extensions for instrumentation (PXI) which meets up with the CODAC standards is designed with developed PSM technology for the high voltage power supply. The compact structure of hardware in the control system is presented too. And the control strategy which is based on shift phase pulse width modulation is discussed Some tests are performed on the control system to validate the control strategy, the experimental results show that the system has a good control performance and fast response, which meets the control requirement of 100 kV/60 A high voltage power supply. (authors)

Le Bon Samaritain: A Community-Based Care Model Supported by Technology.

Science.gov (United States)

Gay, Valerie; Leijdekkers, Peter; Gill, Asif; Felix Navarro, Karla

2015-01-01

The effective care and well-being of a community is a challenging task especially in an emergency situation. Traditional technology-based silos between health and emergency services are challenged by the changing needs of the community that could benefit from integrated health and safety services. Low-cost smart-home automation solutions, wearable devices and Cloud technology make it feasible for communities to interact with each other, and with health and emergency services in a timely manner. This paper proposes a new community-based care model, supported by technology, that aims at reducing healthcare and emergency services costs while allowing community to become resilient in response to health and emergency situations. We looked at models of care in different industries and identified the type of technology that can support the suggested new model of care. Two prototypes were developed to validate the adequacy of the technology. The result is a new community-based model of care called 'Le Bon Samaritain'. It relies on a network of people called 'Bons Samaritains' willing to help and deal with the basic care and safety aspects of their community. Their role is to make sure that people in their community receive and understand the messages from emergency and health services. The new care model is integrated with existing emergency warning, community and health services. Le Bon Samaritain model is scalable, community-based and can help people feel safer, less isolated and more integrated in their community. It could be the key to reduce healthcare cost, increase resilience and drive the change for a more integrated emergency and care system.

Study of Collaborative Management for Transportation Construction Project Based on BIM Technology

Science.gov (United States)

Jianhua, Liu; Genchuan, Luo; Daiquan, Liu; Wenlei, Li; Bowen, Feng

2018-03-01

Abstract. Building Information Modeling(BIM) is a building modeling technology based on the relevant information data of the construction project. It is an advanced technology and management concept, which is widely used in the whole life cycle process of planning, design, construction and operation. Based on BIM technology, transportation construction project collaborative management can have better communication through authenticity simulation and architectural visualization and can obtain the basic and real-time information such as project schedule, engineering quality, cost and environmental impact etc. The main services of highway construction management are integrated on the unified BIM platform for collaborative management to realize information intercommunication and exchange, to change the isolated situation of information in the past, and improve the level of information management. The final BIM model is integrated not only for the information management of project and the integration of preliminary documents and design drawings, but also for the automatic generation of completion data and final accounts, which covers the whole life cycle of traffic construction projects and lays a good foundation for smart highway construction.

Seismic testing of the base-isolated PWR spent-fuel storage rack

International Nuclear Information System (INIS)

Fujita, Katsuhisa; Tanaka, Mamoru; Nakamura, Masaaki; Tsujikura, Yonezo.

1990-01-01

The present paper aims to verify the seismic safety of the base-isolated spent-fuel storage rack. A series of seismic tests has been conducted using a three-dimensional shaking table. A sliding-type base-isolation system was employed for the prototype rack considering environmental conditions in an actual plant. A non linear seismic response analysis was also performed, and it is verified that the prototype of a base-isolated spent-fuel storage rack has a sufficient seismic safety margin for design seismic conditions from the viewpoint of seismic response. (author)

Advances in the psychosocial treatment of addiction: the role of technology in the delivery of evidence-based psychosocial treatment.

Science.gov (United States)

Marsch, Lisa A; Dallery, Jesse

2012-06-01

The clinical community has a growing array of psychosocial interventions with a strong evidence base available for the treatment of SUDs. Considerable opportunity exists for leveraging technology in the delivery of evidence-based interventions to promote widespread reach and impact of evidence-based care. Data from this line of research to date are promising, and underscore the potential public health impact of technology-based therapeutic tools. To fully realize the potential of technology-delivered interventions, several areas of inquiry remain important. First, scientifically sound strategies should be explored to ensure technology-based interventions are optimally designed to produce maximal behavior change. Second, efficient and effective methods should be identified to integrate technology-based interventions into systems of care in a manner that is most responsive to the needs of individual users. Third, payment, privacy, and regulatory systems should be refined and extended to go beyond electronic medical records and telehealth/distance care models, and support the deployment of technology-based systems to enhance the quality, efficiency and cost-effectiveness of care. Fourth, the mechanisms underlying behavior change derived from technology-based treatments should be explicated, including new mechanisms that may be tapped via novel, technology-based tools. Such work will be critical in isolating mechanisms that are useful in predicting treatment response, and in ensuring that key ingredients are present in technology-based interventions as they are made widely available.

Nonlinear observer based fault detection and isolation for a momentum wheel

DEFF Research Database (Denmark)

Jensen, Hans-Christian Becker; Wisniewski, Rafal

2001-01-01

This article realizes nonlinear Fault Detection and Isolation for a momentum wheel. The Fault Detection and Isolation is based on a Failure Mode and Effect Analysis, which states which faults might occur and can be detected. The algorithms presented in this paper are based on a geometric approach...... toachieve nonlinear Fault Detection and Isolation. The proposed algorithms are tested in a simulation study and the pros and cons of the algorithm are discussed....

An electrostatic 3-phase linear stepper motor fabricated by vertical trench isolation technology

International Nuclear Information System (INIS)

Sarajlic, Edin; Yamahata, Christophe; Cordero, Mauricio; Fujita, Hiroyuki

2009-01-01

We present the design, microfabrication and characterization of an electrostatic 3-phase linear stepper micromotor constructed with vertical trench isolation technology. This suitable technology was used to create a monolithic stepper motor with high-aspect-ratio poles and an integrated 3-phase electrical network in the bulk of a standard single-crystal silicon wafer. The shuttle of the stepper motor is suspended by a flexure to avoid any mechanical contact during operation, enhancing the precision, repeatability and reliability of the stepping motion. The prototype is capable of a maximum travel of +/−26 µm (52 µm) at an actuation voltage of 30 V and a step size of 1.4 µm during a half-stepping sequence

Why every national deep-geological-isolation program needs a long-term science & technology component

International Nuclear Information System (INIS)

Budnitz, R J

2006-01-01

The objective of this paper is to set down the rationale for a separate Science & Technology (S&T) Program within every national deep-geological-isolation program. The fundamental rationale for such a Program is to provide a dedicated focus for longer-term science and technology activities that ultimately will benefit the whole repository mission. Such a Program, separately funded and with a dedicated staff (separate from the ''mainline'' activities to develop the repository, the surface facilities, and the transportation system), can devote itself exclusively to the development and management of a long-term science and technology program. Broad experience in governments worldwide has demonstrated that line offices are unlikely to be able to develop and sustain both the appropriate longer-term philosophy and the specialized skills associated with managing longer-term science and technology projects. Accomplishing both of these requires a separate dedicated program office with its own staff

A Survey study on design procedure of Seismic Base Isolation ...

African Journals Online (AJOL)

Michael Horsfall

Base Isolation Systems that is flexible approach to decrease the potential damage. In this ... In addition, we analyze the seismic responses of isolated structures. The seismic ..... Equation 3.7, is examined; it is realized that the inequality ...

3-D seismic response of a base-isolated fast reactor

International Nuclear Information System (INIS)

Kitamura, S.; Morishita, M.; Iwata, K.

1992-01-01

This paper describes a 3-D response analysis methodology development and its application to a base-isolated fast breeder reactor (FBR) plant. At first, studies on application of a base-isolation system to an FBR plant were performed to identify a range of appropriate characteristics of the system. A response analysis method was developed based on mathematical models for the restoring force characteristics of several types of the systems. A series of shaking table tests using a small scale model was carried out to verify the analysis method. A good agreement was seen between the test and analysis results in terms of the horizontal and vertical responses. Parametric studies were then made to assess the effects of various factors which might be influential to the seismic response of the system. Moreover, the method was applied to evaluate three-dimensional response of the base-isolated FBR. (author)

Multi-story base-isolated buildings under a harmonic ground motion. Pt. 1

International Nuclear Information System (INIS)

Fan Fagung; Ahmadi, G.; Tadjbakhsh, I.G.

1990-01-01

The performances of several leading base-isolation devices (Pure-Friction/Sliding-Joint, Rubber Bearing, French System, New Zealand System, and Resilient-Friction) and a newly proposed system (Sliding Resilient-Friction) for a multi-story building subject to a horizontal harmonic ground motion are studied. The governing equations of motion of various systems and the criteria for stick-slip transition are described and a computational algorithm for obtaining their numerical solutions is developed. The responses of the structure with different base-isolation systems under various conditions are analyzed. The peak absolute acceleration, the maximum structural deflection, and the peak base-displacement responses are obtained. The effectiveness of various base isolators are studied and advantages and disadvantages of different systems are discussed. The results show that the base-isolation devices effectively reduce the column stresses and the acceleration transmitted to the superstructure. (orig.)

Isolation and identification of Salmonella spp. in environmental water by molecular technology in Taiwan

Science.gov (United States)

Kuo, Chun Wei; Hao Huang, Kuan; Hsu, Bing Mu; Tsai, Hsien Lung; Tseng, Shao Feng; Shen, Tsung Yu; Kao, Po Min; Shen, Shu Min; Chen, Jung Sheng

2013-04-01

Salmonella spp. is one of the most important causal agents of waterborne diseases. The taxonomy of Salmonella is very complicated and its genus comprises more than 2,500 serotypes. The detection of Salmonella in environmental water samples by routines culture methods using selective media and characterization of suspicious colonies based on biochemical tests and serological assay are generally time consuming. To overcome this drawback, it is desirable to use effective method which provides a higher discrimination and more rapid identification about Salmonella in environmental water. The aim of this study is to investigate the occurrence of Salmonella using molecular technology and to identify the serovars of Salmonella isolates from 70 environmental water samples in Taiwan. The analytical procedures include membrane filtration, non-selective pre-enrichment, selective enrichment of Salmonella. After that, we isolated Salmonella strains by selective culture plates. Both selective enrichment and culture plates were detected by Polymerase Chain Reaction (PCR). Finally, the serovars of Salmonella were confirmed by using biochemical tests and serological assay. In this study, 15 water samples (21.4%) were identified as Salmonella by PCR. The positive water samples will further identify their serotypes by culture method. The presence of Salmonella in environmental water indicates the possibility of waterborne transmission in drinking watershed. Consequently, the authorities need to provide sufficient source protection and to maintain the system for disease prevention. Keywords: Salmonella spp., serological assay, PCR

Technology based Education System

DEFF Research Database (Denmark)

Kant Hiran, Kamal; Doshi, Ruchi; Henten, Anders

2016-01-01

Abstract - Education plays a very important role for the development of the country. Education has multiple dimensions from schooling to higher education and research. In all these domains, there is invariably a need for technology based teaching and learning tools are highly demanded in the acad......Abstract - Education plays a very important role for the development of the country. Education has multiple dimensions from schooling to higher education and research. In all these domains, there is invariably a need for technology based teaching and learning tools are highly demanded...... in the academic institutions. Thus, there is a need of comprehensive technology support system to cater the demands of all educational actors. Cloud Computing is one such comprehensive and user-friendly technology support environment that is the need of an hour. Cloud computing is the emerging technology that has...

Optical isolation based on space-time engineered asymmetric photonic band gaps

Science.gov (United States)

Chamanara, Nima; Taravati, Sajjad; Deck-Léger, Zoé-Lise; Caloz, Christophe

2017-10-01

Nonreciprocal electromagnetic devices play a crucial role in modern microwave and optical technologies. Conventional methods for realizing such systems are incompatible with integrated circuits. With recent advances in integrated photonics, the need for efficient on-chip magnetless nonreciprocal devices has become more pressing than ever. This paper leverages space-time engineered asymmetric photonic band gaps to generate optical isolation. It shows that a properly designed space-time modulated slab is highly reflective/transparent for opposite directions of propagation. The corresponding design is magnetless, accommodates low modulation frequencies, and can achieve very high isolation levels. An experimental proof of concept at microwave frequencies is provided.

Technology for the compatible integration of silicon detectors with readout electronics

International Nuclear Information System (INIS)

Zimmer, G.

1984-01-01

Compatible integration of detectors and readout electronics on the same silicon substrate is of growing interest. As the methods of microelectronics technology have already been adapted for detector fabrication, a common technology basis for detectors and readout electronics is available. CMOS technology exhibits most attractive features for the compatible realization of readout electronics when advanced LSI processing steps are combined with detector requirements. The essential requirements for compatible integration are the availability of high resistivity (100)-oriented single crystalline silicon substrate, the formation of suitably doped areas for MOS circuits and the isolation of the low voltage circuit from the detector operated at much higher supply voltage. Junction isolation as a first approach based on present production technology and dielectric isolation based on an advanced SOI-LSI technology are discussed as the most promising solutions for present and future applications, respectively. (orig.)

'Although we're isolated, we're not really isolated': The value of information and communication technology for older people in rural Australia.

Science.gov (United States)

Berg, Turi; Winterton, Rachel; Petersen, Maree; Warburton, Jeni

2017-12-01

Drawing from a larger study that identified the supports and services that facilitate wellness among older people from rural communities, this study examined the specific contribution made by information and communication technology (ICT). Qualitative interviews were undertaken with 60 older adults from six Australian rural areas. A preliminary thematic analysis was conducted, followed by a higher-order inductive analysis. Information and communication technology use was discussed in terms of individual enrichment, and in terms of enabling connections between the individual and their social networks, community and wider service environments. Information and communication technologies may facilitate wellness for rural older people by compensating for geographical and social isolation. In the changing world of health and aged care service delivery, ICTs will be more important than ever for rural older people in building their capacity to access the services, socialisation and support that they need, regardless of location. © 2017 AJA Inc.

MEMS-based microspectrometer technologies for NIR and MIR wavelengths

International Nuclear Information System (INIS)

Schuler, Leo P; Milne, Jason S; Dell, John M; Faraone, Lorenzo

2009-01-01

Commercially manufactured near-infrared (NIR) instruments became available about 50 years ago. While they have been designed for laboratory use in a controlled environment and boast high performance, they are generally bulky, fragile and maintenance intensive, and therefore expensive to purchase and maintain. Micromachining is a powerful technique to fabricate micromechanical parts such as integrated circuits. It was perfected in the 1980s and led to the invention of micro electro mechanical systems (MEMSs). The three characteristic features of MEMS fabrication technologies are miniaturization, multiplicity and microelectronics. Combined, these features allow the batch production of compact and rugged devices with integrated intelligence. In order to build more compact, more rugged and less expensive NIR instruments, MEMS technology has been successfully integrated into a range of new devices. In the first part of this paper we discuss the UWA MEMS-based Fabry-Perot spectrometer, its design and issues to be solved. MEMS-based Fabry-Perot filters primarily isolate certain wavelengths by sweeping across an incident spectrum and the resulting monochromatic signal is detected by a broadband detector. In the second part, we discuss other microspectrometers including other Fabry-Perot spectrometer designs, time multiplexing devices and mixed time/space multiplexing devices. (topical review)

Experimental studies of the seismic response of structures incorporating base-isolation systems

International Nuclear Information System (INIS)

Kelly, J.M.; Aiken, I.D.

1991-01-01

This paper reviews some of the achievements of the Earthquake Engineering Research Center (EERC) at the University of California at Berkeley in the last few years. Component tests on single isolators are described. Tests on plain and high-damping natural-rubber bearings, lead-rubber bearings, sliding bearings, and bearings incorporating uplift resistance mechanisms have been performed. High-shear strain tests on large (up to full scale) elastomeric bearings have been conducted to determine the stability characteristics and limit states of the isolators. Performance evaluation studies using the earthquake simulator to test large-scale model isolated structures have been carried out for a variety of isolation systems and structures. Uplift studies of slender base-isolated buildings and investigation of the behavior of base-isolated skew bridge decks have been studied. This paper aims to highlight those areas where progress has been made. (orig./HP)

Probe-based recording technology

International Nuclear Information System (INIS)

Naberhuis, Steve

2002-01-01

The invention of the scanning tunneling microscope (STM) prompted researchers to contemplate whether such technology could be used as the basis for the storage and retrieval of information. With magnetic data storage technology facing limits in storage density due to the thermal instability of magnetic bits, the super-paramagnetic limit, the heir-apparent for information storage at higher densities appeared to be variants of the STM or similar probe-based storage techniques such as atomic force microscopy (AFM). Among these other techniques that could provide replacement technology for magnetic storage, near-field optical scanning optical microscopy (NSOM or SNOM) has also been investigated. Another alternative probe-based storage technology called atomic resolution storage (ARS) is also currently under development. An overview of these various technologies is herein presented, with an analysis of the advantages and disadvantages inherent in each particularly with respect to reduced device dimensions. The role of micro electro mechanical systems (MEMS) is emphasized

Technological and safety properties of newly isolated GABA-producing Lactobacillus futsaii strains.

Science.gov (United States)

Sanchart, C; Rattanaporn, O; Haltrich, D; Phukpattaranont, P; Maneerat, S

2016-09-01

To evaluate the technological and safety properties of Lactobacillus futsaii CS3 and CS5 isolated from Thai fermented shrimp products (Kung-Som) in order to develop a valuable gamma-aminobutyric acid (GABA)-producing starter culture. Both strains showed a high GABA-producing ability (>8 mg ml(-1) ) in MRS broth containing 20 mg ml(-1) monosodium glutamate (MSG) for 120 h. They also exhibited inhibitory activity against foodborne pathogens and spoilage bacteria. Cell surface hydrophobicity and proteolytic activity were observed in both strains. Strain CS3 survived better under simulated gastrointestinal tract conditions with only 1·5 log-units cell decrease over 8 h. Both strains showed the ability to deconjugate taurocholate and taurodeoxycholate acid. Neither virulence genes nor biogenic amine production was detected. Strain CS3 exhibited susceptibility to all tested antibiotics with the exception of vancomycin, while strain CS5 showed resistance to vancomycin, ampicillin and chloramphenicol. Based on the results obtained, Lact. futsaii CS3 is very promising as a GABA-producing and potentially probiotic starter culture strain for applications in functional fermented foods. This study focuses on the technological and safety characteristics of Lact. futsaii CS3 and CS5 including their high GABA-producing capacity for the first time. This provides a way of replacing chemical GABA by natural GABA using a GABA-producing starter culture candidate, at the same time offering the consumer new attractive food products. © 2016 The Society for Applied Microbiology.

Seismic qualification of nuclear control board by using base isolation technique

International Nuclear Information System (INIS)

Koizumi, T.; Tsujiuchi, N.; Fujita, T.

1987-01-01

The purpose is to adopt base isolation technique as a new approach for seismic qualification of nuclear control board. Basic concept of base isolation technique is expressed. Two dimensional linear motion mechanism with pre-tensioned coil springs and some dampers are included in the isolation device. Control board is regarded as a lamped mass system with inertia moment. Fundamental movement of this device and control board is calculated as a non-linear response problems. Fundamental analysis and numerical estimation, experimental investigation has been undertaken using an actual size control board. Sufficient agreement was recognized between experimental results and numerical estimation. (orig./HP)

An advanced ISOL facility based on ATLAS

International Nuclear Information System (INIS)

Nolen, J. A.

1999-01-01

The Argonne concept for an accelerator complex for efficiently producing high-quality radioactive beams from ion source energy up to 6-15 MeV/u is described. The Isotope-Separator-On-Line (ISOL) method is used. A high-power driver accelerator produces radionuclides in a target that is closely coupled to an ion source and mass separator. By using a driver accelerator which can deliver a variety of beams and energies the radionuclide production mechanisms can be chosen to optimize yields for the species of interest. To effectively utilize the high beam power of the driver two-step target/ion source geometries are proposed (1) Neutron production with intermediate energy deuterons on a primary target to produce neutron-rich fission products in a secondary 238 U target, and (2) Fragmentation of neutron-rich heavy ion rich fission products in a secondary beams such as 18 O in a target/catcher geometry. Heavy ion beams with total energies in the 1-10 GcV range are also available for radionuclide production via high-energy spallation reactions. At the present time R and D is in progress to develop superconducting resonator structures for a driver linac to cover the energy range up to 100 MeV per nucleon for heavy ions and 200 MeV for protons. The post accelerator scheme is based on using existing ISOL-type 1+ ion source technology followed by CW Radio Frequency Quadruple (RFQ) accelerators and superconducting linacs including the present ATLAS accelerator. A full-scale prototype of the first-stage RFQ has been successfully tested with RF at full design voltage and tests with ion beams are in progress. A benchmark beam, 132 Sn at 7 MeV/u, requires two stripping stages, one a gas stripper at very low velocity after the first RFQ section, and one a foil stripper at higher velocity after a superconducting-linac injector

3D seismic isolation for advanced N.P.P application. Hydraulic 3-Dimensional base-isolation system

International Nuclear Information System (INIS)

Shimada, Takahiro; Kashiwazaki, Akihiro; Fujiwaka, Tatsuya; Moro, Satoshi

2003-01-01

In Japan, a number of three-dimensional base isolation systems have been studied for application to new nuclear plant concepts such as the FBR, but these effects have not so far yielded practically applicable results. The impeding factor has been the difficulty of obtaining an adequate capacity on the vertical isolator for supporting the mass of an actual structure and for suppressing rocking motion. In this paper, we propose a new three-dimensional base isolation system that should solve the foregoing problem. The system is constituted of a set of hydraulic load-carrying cylinders connected to accumulator units containing a compressed gas, another set of rocking-suppression cylinders connected in series, and a laminated rubber bearing laid under each load-carrying cylinder. The present paper covers a basic examination for applying the proposed system to a commercialized FBR now under development in Japan, together with static and dynamic loading tests performed on a scale model to verify expected system performance. Response and analysis reflecting the test results has indicated the proposed system to be well applicable to the envisaged commercialized FBR. The study was undertaken as part of an R and D project sponsored by the government for realizing a three-dimensional seismic isolation system applicable to future FRB's. (author)

A Survey study on design procedure of Seismic Base Isolation ...

African Journals Online (AJOL)

Adding shear walls or braced frames can decrease the potential damage caused by earthquakes.We can isolate the structures from the ground using the Seismic Base Isolation Systems that is flexible approach to decrease the potential damage. In this research we present information on the design procedure of seismic ...

Selective isolation of gonyautoxins 1,4 from the dinoflagellate Alexandrium minutum based on molecularly imprinted solid-phase extraction.

Science.gov (United States)

Lian, Ziru; Wang, Jiangtao

2017-09-15

Gonyautoxins 1,4 (GTX1,4) from Alexandrium minutum samples were isolated selectively and recognized specifically by an innovative and effective extraction procedure based on molecular imprinting technology. Novel molecularly imprinted polymer microspheres (MIPMs) were prepared by double-templated imprinting strategy using caffeine and pentoxifylline as dummy templates. The synthesized polymers displayed good affinity to GTX1,4 and were applied as sorbents. Further, an off-line molecularly imprinted solid-phase extraction (MISPE) protocol was optimized and an effective approach based on the MISPE coupled with HPLC-FLD was developed for selective isolation of GTX1,4 from the cultured A. minutum samples. The separation method showed good extraction efficiency (73.2-81.5%) for GTX1,4 and efficient removal of interferences matrices was also achieved after the MISPE process for the microalgal samples. The outcome demonstrated the superiority and great potential of the MISPE procedure for direct separation of GTX1,4 from marine microalgal extracts. Copyright © 2017. Published by Elsevier Ltd.

Analysis of Bi-directional Effects on the Response of a Seismic Base Isolation System

International Nuclear Information System (INIS)

Park, Hyung-Kui; Kim, Jung-Han; Kim, Min Kyu; Choi, In-Kil

2014-01-01

The floor response spectrum depends on the height of the floor of the structure. Also FRS depends on the characteristics of the seismic base isolation system such as the natural frequency, damping ratio. In the previous study, the floor response spectrum of the base isolated structure was calculated for each axis without considering bi-directional effect. However, the shear behavior of the seismic base isolation system of two horizontal directions are correlated each other by the bi-directional effects. If the shear behavior of the seismic isolation system changes, it can influence the floor response spectrum and displacement response of isolators. In this study, the analysis of a bi-directional effect on the floor response spectrum was performed. In this study, the response of the seismic base isolation system based on the bi-directional effects was analyzed. By analyzing the time history result, while there is no alteration in the maximum shear force of seismic base isolation system, it is confirmed that the shear force is generally more decreased in a one-directional that in a two-directional in most parts. Due to the overall decreased shear force, the floor response spectrum is more reduced in a two-directional than in a one-directional

Applicability of base-isolation R ampersand D in non-reactor facilities to a nuclear reactor plant

International Nuclear Information System (INIS)

Seidensticker, R.W.; Chang, Y.W.

1990-01-01

Seismic isolation is gaining increased attention worldwide for use in a wide spectrum of critical facilities, ranging from hospitals and computing centers to nuclear power plants. While the fundamental principles and technology are applicable to all of these facilities, the degree of assurance that the actual behavior of the isolation systems is as specified varies with the nature of the facility involved. Obviously, the level of effort to provide such assurance for a nuclear power plant will be much greater than that required for, say, a critical computer facility. The question, therefore, is to what extent can research and development (R ampersand D) for non-nuclear use be used to provide technological data needed for seismic isolation of a nuclear power plant. This question, of course is not unique to seismic isolation. Virtually every structural component, system, or piece of equipment used in nuclear power plants is also used in non- nuclear facilities. Experience shows that considerable effort is needed to adapt conventional technology into a nuclear power plant. Usually, more thorough analysis is required, material and fabrication quality-control requirements are more stringent as are controls on field installation. In addition, increased emphasis on maintainability and inservice inspection throughout the life of the plant is generally required to gain acceptance in nuclear power plant application. This paper reviews the R ampersand D programs ongoing for seismic isolation in non-nuclear facilities and related experience and makes a preliminary assessment of the extent to which such R ampersand D and experience can be used for nuclear power plant application. Ways are suggested to improve the usefulness of such non-nuclear R ampersand D in providing the high level of confidence required for the use of seismic isolation in a nuclear reactor plant. 2 refs

Application of the BIOLOG system for characterization of Serratia marcescens ss marcescens isolated from onsite wastewater technology (OSWT).

Science.gov (United States)

Chojniak, Joanna; Jałowiecki, Łukasz; Dorgeloh, Elmar; Hegedusova, Berta; Ejhed, Helene; Magnér, Jörgen; Płaza, Grażyna

2015-01-01

The scope of this study was to apply the Biolog system to identify and characterize a Serratia strain isolated from the surface of black plastic pieces which constitute the fluidized bed filter (onsite wastewater technology, OSWT). The preliminary isolation of the strain was done in the medium with tetracycline at a 16 mg/l concentration. To characterize the isolated strain, the following Biolog methods were applied: (1) EcoPlates microplates for evaluation of physiological profiling, (2) GEN III OmniLog® ID System for identification of the isolate, and (3) phenotypic microarrays (PM) technology for evaluation of sensitivity to antibiotics (PM11 and PM12). Results were recorded using the original OmniLog® software. The Serratia strain was identified as Serratia marcescens ss marcescens with similarity index 0.569. The same identification was obtained by the 16S rDNA analysis. PM analysis showed an enhancement of phenotype (resistance or growth) of this strain to 35 antibiotics. The loss of phenotype (sensitivity or non-growth) was observed only for 5 antibiotics: lomefloxacin (0.4 µg/ml), enoxacin (0.9 µg/ml), nalidixic acid (18.0 µg/ml), paromomycin (25.0 µg/ml) and novobiocin (1100 µg/ml). This study acknowledges that the methods proposed by the Biolog system allow correct and complete identification and characterization of the microbes isolated from different environments. Phenotypic microarrays could be successfully used as a new tool for identification of the multi-antibiotic resistance of bacteria and for determination of the minimal inhibition concentrations (MIC).

Web-based remote video monitoring system implemented using Java technology

Science.gov (United States)

Li, Xiaoming

2012-04-01

A HTTP based video transmission system has been built upon the p2p(peer to peer) network structure utilizing the Java technologies. This makes the video monitoring available to any host which has been connected to the World Wide Web in any method, including those hosts behind firewalls or in isolated sub-networking. In order to achieve this, a video source peer has been developed, together with the client video playback peer. The video source peer can respond to the video stream request in HTTP protocol. HTTP based pipe communication model is developed to speeding the transmission of video stream data, which has been encoded into fragments using the JPEG codec. To make the system feasible in conveying video streams between arbitrary peers on the web, a HTTP protocol based relay peer is implemented as well. This video monitoring system has been applied in a tele-robotic system as a visual feedback to the operator.

State Recognition of High Voltage Isolation Switch Based on Background Difference and Iterative Search

Science.gov (United States)

Xu, Jiayuan; Yu, Chengtao; Bo, Bin; Xue, Yu; Xu, Changfu; Chaminda, P. R. Dushantha; Hu, Chengbo; Peng, Kai

2018-03-01

The automatic recognition of the high voltage isolation switch by remote video monitoring is an effective means to ensure the safety of the personnel and the equipment. The existing methods mainly include two ways: improving monitoring accuracy and adopting target detection technology through equipment transformation. Such a method is often applied to specific scenarios, with limited application scope and high cost. To solve this problem, a high voltage isolation switch state recognition method based on background difference and iterative search is proposed in this paper. The initial position of the switch is detected in real time through the background difference method. When the switch starts to open and close, the target tracking algorithm is used to track the motion trajectory of the switch. The opening and closing state of the switch is determined according to the angle variation of the switch tracking point and the center line. The effectiveness of the method is verified by experiments on different switched video frames of switching states. Compared with the traditional methods, this method is more robust and effective.

Life-cycle cost assessment of seismically base-isolated structures in nuclear power plants

International Nuclear Information System (INIS)

Wang, Hao; Weng, Dagen; Lu, Xilin; Lu, Liang

2013-01-01

Highlights: • The life-cycle cost of seismic base-isolated nuclear power plants is modeled. • The change law of life-cycle cost with seismic fortification intensity is studied. • The initial cost of laminated lead rubber bearings can be expressed as the function of volume. • The initial cost of a damper can be expressed as the function of its maximum displacement and tonnage. • The use of base-isolation can greatly reduce the expected damage cost, which leads to the reduction of the life-cycle cost. -- Abstract: Evaluation of seismically base-isolated structural life-cycle cost is the key problem in performance based seismic design. A method is being introduced to address the life-cycle cost of base-isolated reinforced concrete structures in nuclear power plants. Each composition of life-cycle cost is analyzed including the initial construction cost, the isolators cost and the excepted damage cost over life-cycle of the structure. The concept of seismic intensity is being used to estimate the expected damage cost, greatly simplifying the calculation. Moreover, French Cruas nuclear power plant is employed as an example to assess its life-cycle cost, compared to the cost of non-isolated plant at the same time. The results show that the proposed method is efficient and the expected damage cost is enormously reduced because of the application of isolators, which leads to the reduction of the life-cycle cost of nuclear power plants

Antimicrobial resistance of Listeria monocytogenes isolated from dairy-based food products.

Science.gov (United States)

Harakeh, Steve; Saleh, Imane; Zouhairi, Omar; Baydoun, Elias; Barbour, Elie; Alwan, Nisreen

2009-06-15

In this study Listeria monocytogenes (L. monocytogenes) was isolated from three traditionally consumed Lebanese dairy-based food products. One hundred and sixty four samples (45 samples of Baladi cheese, 36 samples of Shankleesh and 83 of Kishk) were collected from the Bekaa Valley in the Northeast region of Lebanon. Suspected Listeria colonies were selected and initially identified by using standard biochemical tests. Initial identification of the positive L. monocytogenes colonies was confirmed at the molecular level by Polymerase Chain Reaction (n=30) and the confirmed isolates were evaluated for their susceptibility to 10 commonly used antimicrobials. All of the 30 isolates were confirmed to be L. monocytogenes yielding a PCR product of approximately 660 base pairs (bp). L. monocytogenes was detected in 26.67%, 13.89% and 7.23% of the Baladi cheese, Shankleesh and Kishk samples, respectively. The highest resistance in L. monocytogenes isolates was noted against oxacillin (93.33%) followed by penicillin (90%). The results provide an indication of the contamination levels of dairy-based foods in Lebanon and highlight the emergence of multi-drug resistant Listeria in the environment.

Distributed Fault Detection and Isolation for Flocking in a Multi-robot System with Imperfect Communication

Directory of Open Access Journals (Sweden)

Shao Shiliang

2014-06-01

Full Text Available In this paper, we focus on distributed fault detection and isolation (FDI for a multi-robot system where multiple robots execute a flocking task. Firstly, we propose a fault detection method based on the local-information-exchange and sensor-measurement technologies to cover cases of both perfect communication and imperfect communication. The two detection technologies can be adaptively selected according to the packet loss rate (PLR. Secondly, we design a fault isolation method, considering a situation in which faulty robots still influence the behaviours of other robots. Finally, a complete FDI scheme, based on the proposed detection and isolation methods, is simulated in various scenarios. The results demonstrate that our FDI scheme is effective.

An electrostatic 3-phase linear stepper motor fabricated by vertical trench isolation technology

Science.gov (United States)

Sarajlic, Edin; Yamahata, Christophe; Cordero, Mauricio; Fujita, Hiroyuki

2009-07-01

We present the design, microfabrication and characterization of an electrostatic 3-phase linear stepper micromotor constructed with vertical trench isolation technology. This suitable technology was used to create a monolithic stepper motor with high-aspect-ratio poles and an integrated 3-phase electrical network in the bulk of a standard single-crystal silicon wafer. The shuttle of the stepper motor is suspended by a flexure to avoid any mechanical contact during operation, enhancing the precision, repeatability and reliability of the stepping motion. The prototype is capable of a maximum travel of +/-26 µm (52 µm) at an actuation voltage of 30 V and a step size of 1.4 µm during a half-stepping sequence. This work was presented in part at the 19th MicroMechanics Europe Workshop (MME), 28-30 September 2008, Aachen, Germany.

Base Isolation for Seismic Retrofitting of a Multiple Building Structure: Design, Construction, and Assessment

Directory of Open Access Journals (Sweden)

Massimiliano Ferraioli

2017-01-01

Full Text Available The paper deals with the seismic retrofit of a multiple building structure belonging to the Hospital Centre of Avellino (Italy. At first, the paper presents the preliminary investigations, the in situ measurements and laboratory tests, and the seismic assessment of the existing fixed-base structures. Having studied different strategies, base isolation proved to be the more appropriate, also for the possibility offered by the geometry of the building to easily create an isolation interface at the ground level. The paper presents the design project, the construction process, and the details of the isolation intervention. Some specific issues of base isolation for seismic retrofitting of multiple building structures were lightened. Finally, the seismic assessment of the base-isolated building was carried out. The seismic response was evaluated through nonlinear time-history analysis, using the well-known Bouc-Wen model as the constitutive law of the isolation bearings. For reliable dynamic analyses, a suite of natural accelerograms compatible with acceleration spectra of Italian Code was first selected and then applied along both horizontal directions. The results were finally used to address some of the critical issues of the seismic response of the base-isolated multiple building structure: accidental torsional effects and potential poundings during strong earthquakes.

In situ Culturing with Isolation-chip Technology in Hydrogeothermal Springs

Science.gov (United States)

Cantrell, T.; Sutton, S. A.; Tan, G.; Duca, Z. A.; Balayan, V.; Rajesh, N.; Rennie, V.; Haneda, S.; Matsuura, K.; Thiel, V.; Stockton, A. M.

2017-12-01

An estimated 99% of the world's microbial species are uncultivable by traditional laboratory procedures; however, when microbes can be cultured, valuable phenotypic, metabolic and extracellular information can be attained due to increased sample mass and purity [1,2]. Recent attempts to culture the uncultivable microbial "dark matter" have included co-culturing and culturing in situ [3,4]. An emerging microfluidic in situ culturing platform, the isolation chip (iChip), is based on agarose gel microbial trapping. Samples are taken, diluted and inoculated into the agarose matrix, and followed by emplacement back in the site of origin, where nutrients are accessible from the environment. We tested these devices in hydrothermal fields in 2015 in Iceland, followed by additional field campaigns in Japan and Iceland in 2016. The Japan field campaign, described here, was conducted in the Japanese Alps in the Negano prefecture. The site was monitored over a ten-day period, during which temperature, conductivity and dissolved oxygen were recorded. Fluorescent confocal microscopy was used to visualize the morphologies of 56 sample plugs. A majority of the growth occurred within 50 microns of the plug surface, and a majority of the observed morphologies were documented. Amplification and sequencing of the 16s rRNA region (V3-V4) indicated that of the 26 samples selected, 4 samples were isolated extremophile monocultures. Two members of the genus Anoxybacillus were identified in a chip which had incubated under green mats and in high levels of dissolved oxygen in the bulk fluid, which may indicate culturing selectivity. This work represents the novel application of an emerging microfluidic technology to provide pure monoclonal samples of extremophile organisms, potentially enabling study via molecular techniques that would otherwise be inaccessible. [1] Amador, E. S. et al. Planetary and Space Science 106, 1-10, doi:10.1016/j.pss.2014.11.006 (2015). [2] Lombard, N., Prestat, E

The application of gene-based technologies in the study of Newcastle disease virus isolates from Uganda

International Nuclear Information System (INIS)

Otim, M.O.; Bisgaard, M.; Christensen, H.; Jorgensen, P.; Handberg, K.

2005-01-01

Molecular techniques were used to characterize 16 Newcastle disease (ND) Virus (NDV) isolates from ND outbreaks in chickens in eastern Uganda in 2001, and evaluate ND epidemiology, with emphasis on molecular aspects. F and HN genes, which are the major determinants of virulence, were studied. Strain pathogenicity was derived from genetic analysis of the F gene sequence and intracerebral pathogenicity index (ICPI). Comparative genetic and phylogenetic tree analyses were performed on the HN genes of the isolates and some strains selected from GenBank. ClustalX 1.81 and Phylip were used for gene alignment analysis and the final phylogeny was produced by the neighbour-joining method. F gene cleavage site sequence analysis, phylogenetic analysis and biological characterization showed that the strains were very virulent and closely related, being of common ancestry. All the Ugandan NDV isolates formed separate clades from the currently known genotypes, suggesting that they are a novel genotype, unrelated to those that have caused previous pandemics. (author)

Sequence based polymorphic (SBP marker technology for targeted genomic regions: its application in generating a molecular map of the Arabidopsis thaliana genome

Directory of Open Access Journals (Sweden)

Sahu Binod B

2012-01-01

Full Text Available Abstract Background Molecular markers facilitate both genotype identification, essential for modern animal and plant breeding, and the isolation of genes based on their map positions. Advancements in sequencing technology have made possible the identification of single nucleotide polymorphisms (SNPs for any genomic regions. Here a sequence based polymorphic (SBP marker technology for generating molecular markers for targeted genomic regions in Arabidopsis is described. Results A ~3X genome coverage sequence of the Arabidopsis thaliana ecotype, Niederzenz (Nd-0 was obtained by applying Illumina's sequencing by synthesis (Solexa technology. Comparison of the Nd-0 genome sequence with the assembled Columbia-0 (Col-0 genome sequence identified putative single nucleotide polymorphisms (SNPs throughout the entire genome. Multiple 75 base pair Nd-0 sequence reads containing SNPs and originating from individual genomic DNA molecules were the basis for developing co-dominant SBP markers. SNPs containing Col-0 sequences, supported by transcript sequences or sequences from multiple BAC clones, were compared to the respective Nd-0 sequences to identify possible restriction endonuclease enzyme site variations. Small amplicons, PCR amplified from both ecotypes, were digested with suitable restriction enzymes and resolved on a gel to reveal the sequence based polymorphisms. By applying this technology, 21 SBP markers for the marker poor regions of the Arabidopsis map representing polymorphisms between Col-0 and Nd-0 ecotypes were generated. Conclusions The SBP marker technology described here allowed the development of molecular markers for targeted genomic regions of Arabidopsis. It should facilitate isolation of co-dominant molecular markers for targeted genomic regions of any animal or plant species, whose genomic sequences have been assembled. This technology will particularly facilitate the development of high density molecular marker maps, essential for

A broad review of the status of seismic isolation study in Japan

International Nuclear Information System (INIS)

Aoyagi, Sakae; Shibata, Heki

1992-01-01

In Japan, studies on seismic isolation technologies have been extensively, performed by a several organizations for the last decade, in order to apply them to fast reactors and thermal reactors. These programs have been managed by CRIEPl, JAPC, NUPEC, PNC the electric utilities and so on. Japanese major reactor manufacturers and construction companies have been participating in each program. Consequently, the base isolation technologies in Japan have been well-developed and are changing their stage from the basic studies to the integration for actual nuclear application. In this paper, the background, the current status and future perspective on the seismic isolation studies conducted by a several Japanese organizations are concisely described. (author)

Specific issues and proposals in aseismic design technologies (seismic isolation technologies)

International Nuclear Information System (INIS)

Fujita, Satoshi

2000-01-01

It is examined among engineers to control vibration of buildings and constructions formed by earthquake, and at present various vibration control techniques are in actual use. A vibration isolating structure passing through earthquake, and vibration controlling due to wind are its typical ones, which have been recently and rapidly supplied to actual use through a chance that laminated rubber was researched and developed for a vibration isolation supporting materials capable of supplying to actual use about 15 years ago. However, the active addition mass type vibration controller is not adequate to large earthquake countermeasure from points of addition mass size, drive variation, and limit of control power. For a vibration controller suitable for this aim an energy absorber (damper) of a type set between layers of constructions at present is the most predominant, of which various types are earnestly under research and development. Here were explained on earthquake and its energy, seismic resistant design, vibration isolation structure, and so forth. (G.K.)

Preventing social isolation in older people.

Science.gov (United States)

Cotterell, Natalie; Buffel, Tine; Phillipson, Christopher

2018-07-01

The extent of social isolation amongst older people has emerged as a major concern for health and social policy. Although the social and health outcomes of social isolation are well documented, evidence regarding the prevention of isolation in later life remains scarce. This article addresses this by presenting the findings from a literature review focusing on the identification, assessment, prevention, and intervention strategies relevant to social isolation in older age. The paper first addresses the issues of identification and assessment, using an ecological framework to identify the risk factors for social isolation at four levels: individual, relationship, community, and societal. It then reviews different types of interventions to reduce or prevent social isolation in later life, including one-to-one, group, service provision, technology-based, neighbourhood, and structural interventions. The paper discusses both the opportunities and the constraints associated with these different approaches. The discussion highlights future directions for research, emphasising the need for a cultural change from 'cure' to 'prevention' of social isolation across the life-course, and the importance of acknowledging greater diversity within the ageing population. Copyright © 2018 Elsevier B.V. All rights reserved.

Selective Osmotic Shock (SOS)-Based Islet Isolation for Microencapsulation.

Science.gov (United States)

Enck, Kevin; McQuilling, John Patrick; Orlando, Giuseppe; Tamburrini, Riccardo; Sivanandane, Sittadjody; Opara, Emmanuel C

2017-01-01

Islet transplantation (IT) has recently been shown to be a promising alternative to pancreas transplantation for reversing diabetes. IT requires the isolation of the islets from the pancreas, and these islets can be used to fabricate a bio-artificial pancreas. Enzymatic digestion is the current gold standard procedure for islet isolation but has lingering concerns. One such concern is that it has been shown to damage the islets due to nonselective tissue digestion. This chapter provides a detailed description of a nonenzymatic method that we are exploring in our lab as an alternative to current enzymatic digestion procedures for islet isolation from human and nonhuman pancreatic tissues. This method is based on selective destruction and protection of specific cell types and has been shown to leave the extracellular matrix (ECM) of islets intact, which may thus enhance islet viability and functionality. We also show that these SOS-isolated islets can be microencapsulated for transplantation.

Understanding Social Isolation Among Urban Aging Adults: Informing Occupation-Based Approaches.

Science.gov (United States)

Hand, Carri; Retrum, Jessica; Ware, George; Iwasaki, Patricia; Moaalii, Gabe; Main, Deborah S

2017-10-01

Socially isolated aging adults are at risk of poor health and well-being. Occupational therapy can help address this issue; however, information is needed to guide such work. National surveys characterize social isolation in populations of aging adults but fail to provide meaningful information at a community level. The objective of this study is to describe multiple dimensions of social isolation and related factors among aging adults in diverse urban neighborhoods. Community-based participatory research involving a door-to-door survey of adults 50 years and older was used. Participants ( N = 161) reported social isolation in terms of small social networks (24%) and wanting more social engagement (43%). Participants aged 50 to 64 years reported the highest levels of isolation in most dimensions. Low income, poor health, lack of transportation, and infrequent information access appeared linked to social isolation. Occupational therapists can address social isolation in similar urban communities through policy and practice that facilitate social engagement and network building.

Home-based palliative care: challenges in the care of technology-dependent children.

Science.gov (United States)

Floriani, Ciro A

2010-01-01

To conceptualize palliative care and its indications in Pediatrics; to describe the difficulties involved in the delivery of such care at home for technology-dependent children; and to analyze, from a bioethical perspective, the moral dilemmas of palliative care assistance. A literature review of palliative care for technology-dependent children and a bioethical analysis of moral dilemmas. There are several obstacles to palliative care for technology-dependent children: structural difficulties at home; social isolation of both children and families; health professionals' sense of disbelief regarding this type of care; an excessive number of medical devices at home; uncertainty of a terminal prognosis; physical, emotional, social, material, and financial burden for parents and family; changes in family dynamics to adjust to these children; paternalistic relationship between professionals and family; changes in family roles, with shifts in the caregiver role. It is essential to outline an agenda based on the premise that the medical apparatus for technology-dependent children will change the landscape of the home, and such a change might become a problem to be faced by all those living together. Based on this assumption, actions performed in a setting other than a health care facility might exert an actual protective effect on children and family, offering support in their several needs and developing a model of care delivery that includes interventions in the different levels of burden on these vulnerated and unprotected individuals.

Encryption Technology based on Human Biometrics

Directory of Open Access Journals (Sweden)

Wei Yang

2017-08-01

Full Text Available The research progress of encryption technologies based on human biometrics is reviewed in this paper.The technologies that utilize human biometrics to make information encryption and identity authentication,and the technologies which combine biometrics encryption with optical encryption methods are introduced in detail.The advantages and disadvantages of these encryption systems are discussed,and the obstacles in practical applications are pointed out.Finally,the prospect of the new encryption technologies that are based on human biometrics are predicted.

If you build it will they come? Addressing social isolation within a technology-based HIV intervention for young black men who have sex with men.

Science.gov (United States)

LeGrand, Sara; Muessig, Kathryn E; Pike, Emily C; Baltierra, Nina; Hightow-Weidman, Lisa B

2014-01-01

The rate of HIV infections among young black men who have sex with men (YBMSM) continues to rise at an alarming pace. YBMSM are particularly vulnerable to social isolation and a lack of social support due to experiences with racism and homophobia, which may have implications for sexual risk behaviors. The purpose of this study was to explore perceptions of social isolation and sense of community among YBMSM, the need for and receptivity to social networking features designed to reduce social isolation and build community within an Internet- and mobile phone-based primary and secondary HIV prevention intervention for YBMSM and to identify strategies to develop these features. Focus groups were conducted with 22 YBMSM aged 20-30 years at three sites in North Carolina. Data from the focus groups were thematically analyzed using NVivo. Feelings of social isolation and lack of a sense of community were strongly endorsed by participants with homophobia, lack of opportunities for social engagement, and a focus on sex rather than friendship in interpersonal relationships with other YBMSM cited as contributing factors. Participants were receptive to a social networking intervention designed to reduce social isolation and build community. Recommendations offered by participants to increase acceptability and usability of such features included: availability of information about healthy relationships, the ability to connect with other YBMSM and health care providers, and ensuring the site had ongoing facilitation by the study team as well as monitoring for inappropriate content. The development of a social networking feature of an HIV prevention intervention may present an opportunity to reduce social isolation, build community, and reduce risky sexual behaviors among YBMSM. The findings from this study are being used to inform the development of a social networking feature for an existing Internet- and mobile phone-based primary and secondary HIV prevention intervention for

The numerical computation of seismic fragility of base-isolated Nuclear Power Plants buildings

International Nuclear Information System (INIS)

Perotti, Federico; Domaneschi, Marco; De Grandis, Silvia

2013-01-01

Highlights: • Seismic fragility of structural components in base isolated NPP is computed. • Dynamic integration, Response Surface, FORM and Monte Carlo Simulation are adopted. • Refined approach for modeling the non-linearities behavior of isolators is proposed. • Beyond-design conditions are addressed. • The preliminary design of the isolated IRIS is the application of the procedure. -- Abstract: The research work here described is devoted to the development of a numerical procedure for the computation of seismic fragilities for equipment and structural components in Nuclear Power Plants; in particular, reference is made, in the present paper, to the case of isolated buildings. The proposed procedure for fragility computation makes use of the Response Surface Methodology to model the influence of the random variables on the dynamic response. To account for stochastic loading, the latter is computed by means of a simulation procedure. Given the Response Surface, the Monte Carlo method is used to compute the failure probability. The procedure is here applied to the preliminary design of the Nuclear Power Plant reactor building within the International Reactor Innovative and Secure international project; the building is equipped with a base isolation system based on the introduction of High Damping Rubber Bearing elements showing a markedly non linear mechanical behavior. The fragility analysis is performed assuming that the isolation devices become the critical elements in terms of seismic risk and that, once base-isolation is introduced, the dynamic behavior of the building can be captured by low-dimensional numerical models

Advanced location-based technologies and services

CERN Document Server

Karimi, Hassan A

2013-01-01

Due to the rapid increase in the number of mobile device users worldwide, location-based services (LBSs) have become pervasive, and the demand for them will continue to grow. Exploring recent changes in the technology and its uses, Advanced Location-Based Technologies and Services takes an in-depth look at new and existing technologies, techniques, applications, and opportunities. Under the editorial guidance of Hassan Karimi, with contributions from experts in the field, the book examines the breadth and depth of advanced LBS technologies and techniques. The book provides up-to-date informati

Observer-based Fault Detection and Isolation for Nonlinear Systems

DEFF Research Database (Denmark)

Lootsma, T.F.

With the rise in automation the increase in fault detectionand isolation & reconfiguration is inevitable. Interest in fault detection and isolation (FDI) for nonlinear systems has grown significantly in recent years. The design of FDI is motivated by the need for knowledge about occurring faults...... in fault-tolerant control systems (FTC systems). The idea of FTC systems is to detect, isolate, and handle faults in such a way that the systems can still perform in a required manner. One prefers reduced performance after occurrence of a fault to the shut down of (sub-) systems. Hence, the idea of fault......-output decoupling is described. It is a new idea based on the solution of the input-output decoupling problem. The idea is to include FDI considerations already during the control design....

Multi-resonant electromagnetic shunt in base isolation for vibration damping and energy harvesting

Science.gov (United States)

Pei, Yalu; Liu, Yilun; Zuo, Lei

2018-06-01

This paper investigates multi-resonant electromagnetic shunts applied to base isolation for dual-function vibration damping and energy harvesting. Two multi-mode shunt circuit configurations, namely parallel and series, are proposed and optimized based on the H2 criteria. The root-mean-square (RMS) value of the relative displacement between the base and the primary structure is minimized. Practically, this will improve the safety of base-isolated buildings subjected the broad bandwidth ground acceleration. Case studies of a base-isolated building are conducted in both the frequency and time domains to investigate the effectiveness of multi-resonant electromagnetic shunts under recorded earthquake signals. It shows that both multi-mode shunt circuits outperform traditional single mode shunt circuits by suppressing the first and the second vibration modes simultaneously. Moreover, for the same stiffness ratio, the parallel shunt circuit is more effective at harvesting energy and suppressing vibration, and can more robustly handle parameter mistuning than the series shunt circuit. Furthermore, this paper discusses experimental validation of the effectiveness of multi-resonant electromagnetic shunts for vibration damping and energy harvesting on a scaled-down base isolation system.

SUSTAINABILITY LOGISTICS BASING SCIENCE AND TECHNOLOGY OBJECTIVE DEMONSTRATION; SELECTED TECHNOLOGY ASSESSMENT

Science.gov (United States)

2018-03-22

BASING SCIENCE AND TECHNOLOGY OBJECTIVE – DEMONSTRATION; SELECTED TECHNOLOGY ASSESSMENT by Gregg J. Gildea Paul D. Carpenter Benjamin J...Campbell William F. Harris* Michael A. McCluskey** and José A. Miletti*** *General Dynamics Information Technology Fairfax, VA 22030 **Maneuver...SCIENCE AND TECHNOLOGY OBJECTIVE – DEMONSTRATION; SELECTED TECHNOLOGY ASSESSMENT 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT

Technological and safety properties display biodiversity among enterococci isolated from two Egyptian cheeses, "Ras" and "Domiati".

Science.gov (United States)

Malek, Reine; El-Attar, Aisha; Mohamed, Mariam; Anwar, Shimaa; El-Soda, Morsi; Béal, Catherine

2012-02-15

The technological and safety properties of 35 indigenous strains of Enterococcus faecium isolated from two Egyptian cheeses were characterised in order to determine their ability for rational manufacture of diversified and typical dairy products in the Middle East. A great diversity was observed within the 35 strains on the basis of their technological properties. A statistical analysis made it possible to distribute the 35 strains of E. faecium into different groups. Three groups were identified in terms of their acidification activity, measured by the Cinac system: a group of strains that quickly acidified milk, a second that moderately acidified milk, and a last cluster that revealed weak acidification activity. On the basis of texturing properties that were evaluated using a texturometer and a viscometer, a cluster of strains produced viscous and firm gels, a second cluster included fairly viscous, firm and cohesive gels, and a last group generated slightly viscous, but firm and very cohesive gels. By considering the aroma profiles that were determined by gas chromatography coupled with mass spectrometry, four clusters were identified. One cluster displayed a high dimethyl disulfide level, a second group of strains was highly aromatic, a third cluster led to typical "lactic" products, and the last cluster made it possible to obtain low aromatic products. None of the 35 strains proved to be β-haemolytic on the basis of the characterisation of their safety properties. The resistance to 20 antibiotics was assessed by the disc diffusion method. The 35 isolates were sensitive to 12 antibiotics, and among them, one isolate was resistant to only two antibiotics (nalixidic acid and streptomycin). The resistance to eight antibiotics was strain-dependant. Finally, this study demonstrates that some indigenous strains of E. faecium displayed interesting technological properties for cheese manufacture, together with good safety characteristics. They could be useful for the

Virtual maintenance technology for reactor system based on PPR technology

International Nuclear Information System (INIS)

Wu Yaxiang; Ma Baiyong

2009-01-01

Based on the Product, Process and Resources (PPR) technology, the establishing technology of virtual maintenance environment for the reactor system and the process structure tree for virtual maintenance is studied, and the flow for the maintainability design and simulation for reactor system is put forward. Based on the subsection simulation of maintenance process and layered design of maintenance actions, the leveled structure of the reactor system virtual maintenance task is studied. The relation for the data of product, process and resource is described by Plan Evaluation and Review Technology (PERT) diagram to define the maintenance operation. (authors)

The emergence of new technology-based industries: the case of fuel cells and its technological relatedness to regional knowledge bases

DEFF Research Database (Denmark)

Tanner, Anne Nygaard

2016-01-01

to emerging radical technologies that create the foundation for new industries. The article develops a new measure for technological relatedness between the knowledge base of a region and that of a radical technology based on patent classes. It demonstrates that emerging fuel cell technology develops where...... the regional knowledge base is technologically related to that of fuel cells and consequently confirms the evolutionary thesis.......Evolutionary economic geographers propose that regional diversification is a path-dependent process whereby industries grow out of pre-existing industrial structures through technologically related localised knowledge spillovers and learning. This article examines whether this also applies...

Multistage position-stabilized vibration isolation system for neutron interferometry

Science.gov (United States)

Arif, Muhammad; Brown, Dennis E.; Greene, Geoffrey L.; Clothier, R.; Littrell, K.

1994-10-01

A two stage, position stabilized vibration isolation system has been constructed and is now in operation at the Cold Neutron Research Facility of the National Institute of Standards and Technology, Gaithersburg, MD. The system employs pneumatic isolators with a multiple input/multiple output pneumatic servo system based upon pulse width modulation control loops. The first stage consists of a 40,000 kg reinforced concrete table supported by pneumatic isolators. A large environmentally isolated laboratory enclosure rests on the concrete table. The second stage consists of a 3000 kg granite optical table located within the enclosure and supported by another set of pneumatic isolators. The position of the two stages is monitored by proximity sensors and inclinometers with 12 degrees of freedom. The system controls 12 independent pneumatic airsprings. The signals from these sensors are fed into a personal computer based control system. The control system has maintained the position of the two stages to better than 1 micrometers in translation and 5 (mu) rad in orientation for a period of a few months. A description of the system and its characteristics is given.

Experimental studies of the seismic response of structures incorporating base isolation systems

International Nuclear Information System (INIS)

Kelly, J.M.; Aiken, I.D.

1989-01-01

Whereas the concept of base isolating structures from the damaging effects of earthquake motions is not new, implementation of the technique is a relatively new occurrence. This has mainly been due to the need for several important developments in materials science and experimental and analytical modeling before base isolation could evolve into a practical approach for seismic design. One of these developments has been the ability to test large-scale isolation systems using simulated seismic loads. These tests have not only proven the performance and reliability of the isolation systems and hardware, but have enabled correlation studies to be undertaken which have confirmed the accuracy of analytical methods and the acceptability of current design procedures. The Earthquake Engineering Research Center (EERC) at the University of California at Berkeley has been an active participant in this work, and this paper reviews some of the achievements of the Center in the last few years. Component tests on single isolators are described. Tests on plain and high damping natural rubber bearings, lead-rubber bearings, sliding bearings, and bearings incorporating uplift resistance mechanisms have been performed. High-shear strain tests on large (up to full scale) elastomeric bearings have been conducted to determine the stability characteristics and limit states of the isolators

Analytical Model-based Fault Detection and Isolation in Control Systems

DEFF Research Database (Denmark)

Vukic, Z.; Ozbolt, H.; Blanke, M.

1998-01-01

The paper gives an introduction and an overview of the field of fault detection and isolation for control systems. The summary of analytical (quantitative model-based) methodds and their implementation are presented. The focus is given to mthe analytical model-based fault-detection and fault...

Security Isolation Strategy Mechanism for Lightweight Virtualization Environment

Directory of Open Access Journals (Sweden)

Liu Qian

2017-01-01

Full Text Available For cloud service providers, lightweight virtualization is a more economical way of virtualization. While the user is worried about the safety of applications and data of the container, due to the container sharing the underlying interface and the kernel, therefore the security and trusted degree of lightweight virtualization container isolation mechanism is critical for the promotion of lightweight virtualization service. Because the user cannot directly participate in the process of the construction and management of container isolation mechanism, it is difficult for them to establish confidence in the security and trusted degree of container isolation mechanism. Based on the research and analysis of system credible and virtualization isolation mechanism, this paper puts forward a set of lightweight virtualization security isolation strategy mechanism, divides lightweight virtualization container storage address space into several parts, puts forward the definition of lightweight virtualization security isolation, gives the formal description and proof of container security isolation strategy, and combines with related technology to verify the feasibility of lightweight virtualization security isolation strategy mechanism. The mechanism has important guiding significance for cloud services providers to deploy container security isolation.

Thermally-isolated silicon-based integrated circuits and related methods

Science.gov (United States)

Wojciechowski, Kenneth; Olsson, Roy H.; Clews, Peggy J.; Bauer, Todd

2017-05-09

Thermally isolated devices may be formed by performing a series of etches on a silicon-based substrate. As a result of the series of etches, silicon material may be removed from underneath a region of an integrated circuit (IC). The removal of the silicon material from underneath the IC forms a gap between remaining substrate and the integrated circuit, though the integrated circuit remains connected to the substrate via a support bar arrangement that suspends the integrated circuit over the substrate. The creation of this gap functions to release the device from the substrate and create a thermally-isolated integrated circuit.

Method of making thermally-isolated silicon-based integrated circuits

Science.gov (United States)

Wojciechowski, Kenneth; Olsson, Roy; Clews, Peggy J.; Bauer, Todd

2017-11-21

Thermally isolated devices may be formed by performing a series of etches on a silicon-based substrate. As a result of the series of etches, silicon material may be removed from underneath a region of an integrated circuit (IC). The removal of the silicon material from underneath the IC forms a gap between remaining substrate and the integrated circuit, though the integrated circuit remains connected to the substrate via a support bar arrangement that suspends the integrated circuit over the substrate. The creation of this gap functions to release the device from the substrate and create a thermally-isolated integrated circuit.

Study on design procedure of three-dimensional building base isolation system using thick rubber bearing

International Nuclear Information System (INIS)

Yabana, Shuichi; Matsuda, Akihiro

2003-01-01

In this study, design procedure on three-dimensional base isolation system is developed. Base isolation system proposed by CRIEPI uses thick rubber bearing and damper as isolation device. As for thick rubber bearings, design formula for evaluating vertical stiffness is proposed, and design conditions regarding size and vertical pressure are investigated. Figure-U type lead damper is proposed as three-dimensional damper and by loading tests its mechanical characteristics is evaluated. The concept of multi-layered interconnected rubber bearing, which is advantageous over large scale bearing in manufacturability, is proposed and its good performance is confirmed by the loading test. Through the response analyses, it is shown the rocking response of the proposed three-dimensional base isolation system is very small and not influential to the system, and the reduction of the vertical response is attained using the proposed isolation device. (author)

Reporter-Based Isolation of Developmental Myogenic Progenitors

Directory of Open Access Journals (Sweden)

Eyemen Kheir

2018-04-01

Full Text Available The formation and activity of mammalian tissues entail finely regulated processes, involving the concerted organization and interaction of multiple cell types. In recent years the prospective isolation of distinct progenitor and stem cell populations has become a powerful tool in the hands of developmental biologists and has rendered the investigation of their intrinsic properties possible. In this protocol, we describe how to purify progenitors with different lineage history and degree of differentiation from embryonic and fetal skeletal muscle by fluorescence-activated cell sorting (FACS. The approach takes advantage of a panel of murine strains expressing fluorescent reporter genes specifically in the myogenic progenitors. We provide a detailed description of the dissection procedures and of the enzymatic dissociation required to maximize the yield of mononucleated cells for subsequent FACS-based purification. The procedure takes ~6–7 h to complete and allows for the isolation and the subsequent molecular and phenotypic characterization of developmental myogenic progenitors.

Experimental, economical and ecological substantiation of fuel cycle based on pyroelectrochemical reprocessing and vibropac technology

International Nuclear Information System (INIS)

Ivanov, V.B.; Skiba, O.V.; Mayershin, A.A.; Bychkov, A.V.; Demidova, L.S.; Porodnov, P.T.

1997-01-01

The humanity comes to the border of centuries. While growing the population, capacity of manufacture in various industries increases. It will be impossible to solve problems, facing the humanity, without introducing safe and high-efficient technologies. The following principles are considered to be the most important ones for technologies of the future: 1) The closed cycle, i.e. internal isolation of technological processes, aimed at reducing a gross output of dangerous substances, which are harmful to an environment, from industry, 2) Optimization of technological systems which is intended for achieving necessary results (both technological and commercial) with the maximal exception of excessive stages and processes, 3) Maximum level of internally inherent safety, i.e. using processes, in which safety is based not only on engineering barriers of safety, but also on its own, > properties of technological system, which creates a low degree of ecological damage probability. These principles have influence both on general safety and on economy in equal degree. The external nuclear fuel cycle, as a complex technological system, is to be built under the same principles. It is necessary to take into account, that, as a whole, the technologies connected with reprocessing and preparation of nuclear fuel were formed in 50-s years and, besides, the majority of modern technologies were developed as military technologies continuation. It is for this reason, that many technologies have not been optimized yet if real society needs are taken into consideration. (J.P.N.)

An anomaly detection and isolation scheme with instance-based learning and sequential analysis

International Nuclear Information System (INIS)

Yoo, T. S.; Garcia, H. E.

2006-01-01

This paper presents an online anomaly detection and isolation (FDI) technique using an instance-based learning method combined with a sequential change detection and isolation algorithm. The proposed method uses kernel density estimation techniques to build statistical models of the given empirical data (null hypothesis). The null hypothesis is associated with the set of alternative hypotheses modeling the abnormalities of the systems. A decision procedure involves a sequential change detection and isolation algorithm. Notably, the proposed method enjoys asymptotic optimality as the applied change detection and isolation algorithm is optimal in minimizing the worst mean detection/isolation delay for a given mean time before a false alarm or a false isolation. Applicability of this methodology is illustrated with redundant sensor data set and its performance. (authors)

Safety substantiation for underground isolation of spent nuclear fuel or spent nuclear materials as a basis to develop reliable technological solutions

International Nuclear Information System (INIS)

Gupalo, T.A.; Beygul, V.P.; Gupalo, M.S.; Kudinov, K.G.

2000-01-01

Major issues of the technique for mining and ecological safety substantiation of multi-barrier systems for long-term underground isolation of spent nuclear materials and solidified wastes containing long-lived radionuclides have been presented. The experience with the use of this technique for assessment of ecological safety for the long-term storage of plutonium-containing intermediate level wastes in underground facilities existing in the crystalline rock mass has been considered. The probabilistic evaluations of events of the emergency sequences of abnormal situations are based on the results of 40-year in-situ investigations in the rock mass. Feasibility of optimization has been shown for technological design solutions on storage facilities by the ''risk-costs'' principle. (authors)

Seismic isolation of buildings using composite foundations based on metamaterials

Science.gov (United States)

Casablanca, O.; Ventura, G.; Garescı, F.; Azzerboni, B.; Chiaia, B.; Chiappini, M.; Finocchio, G.

2018-05-01

Metamaterials can be engineered to interact with waves in entirely new ways, finding application on the nanoscale in various fields such as optics and acoustics. In addition, acoustic metamaterials can be used in large-scale experiments for filtering and manipulating seismic waves (seismic metamaterials). Here, we propose seismic isolation based on a device that combines some properties of seismic metamaterials (e.g., periodic mass-in-mass systems) with that of a standard foundation positioned right below the building for isolation purposes. The concepts on which this solution is based are the local resonance and a dual-stiffness structure that preserves large (small) rigidity for compression (shear) effects. In other words, this paper introduces a different approach to seismic isolation by using certain principles of seismic metamaterials. The experimental demonstrator tested on the laboratory scale exhibits a spectral bandgap that begins at 4.5 Hz. Within the bandgap, it filters more than 50% of the seismic energy via an internal dissipation process. Our results open a path toward the seismic resilience of buildings and a critical infrastructure to shear seismic waves, achieving higher efficiency compared to traditional seismic insulators and passive energy-dissipation systems.

Status of radiation-based measurement technology

International Nuclear Information System (INIS)

Moon, B. S.; Lee, J. W.; Chung, C. E.; Hong, S. B.; Kim, J. T.; Park, W. M.; Kim, J. Y.

1999-03-01

This report describes the status of measurement equipment using radiation source and new technologies in this field. This report includes the development status in Korea together with a brief description of the technology development and application status in ten countries including France, America, and Japan. Also this report describes technical factors related to radiation-based measurement and trends of new technologies. Measurement principles are also described for the equipment that is widely used among radiation-based measurement, such as level measurement, density measurement, basis weight measurement, moisture measurement, and thickness measurement. (author). 7 refs., 2 tabs., 21 figs

Performance-Based Technology Selection Filter description report

International Nuclear Information System (INIS)

O'Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

1992-05-01

A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL)

Performance-Based Technology Selection Filter description report

Energy Technology Data Exchange (ETDEWEB)

O' Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

1992-05-01

A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL).

Evaluation of Wind Farm Controller based Fault Detection and Isolation

DEFF Research Database (Denmark)

Odgaard, Peter Fogh; Shafiei, Seyed Ehsan

2015-01-01

detection and isolation and fault tolerant control has previously been proposed. Based on this model, and international competition on wind farm FDI was organized. The contributions were presented at the IFAC World Congress 2014. In this paper the top three contributions to this competition are shortly......In the process of lowering cost of energy of power generated by wind turbines, some focus has been drawn towards fault detection and isolation and as well as fault tolerant control of wind turbines with the purpose of increasing reliability and availability of the wind turbines. Most modern wind...

Application of seismic isolation technology to demonstration FBR

International Nuclear Information System (INIS)

Kato, Muneaki

1994-01-01

The Japanese demonstration FBR is loop type, the intermediate heat exchanger is installed between the reactor and the steam generator, and up to the intermediate heat exchanger is in the containment vessel, which is designed as a reinforced concrete vessel. In FBRs, the optimization in aseismatic design and high temperature structural design is important. The reactor building is buried in rock bed up to its center of gravity to minimize the amplifying earthquake response. If the seismic isolation structure for a reactor is realized, cost reduction can be expected by the rationalization of machinery and equipment and the standardization of buildings and facilities. The research on FBR seismic isolation design has been carried out by Central Research Institute of Electric Power Industry and Japan Atomic Power Co. The concept of FBR seismic isolation design, the basic condition for the design evaluation, the research on safety allowance and the conceptual design analysis are reported. (K.I.)

A parylene-filled-trench technique for thermal isolation in silicon-based microdevices

International Nuclear Information System (INIS)

Lei Yinhua; Wang Wei; Li Ting; Jin Yufeng; Zhang Haixia; Li Zhihong; Yu Huaiqiang; Luo Yingcun

2009-01-01

Microdevices prepared in a silicon substrate have been widely used in versatile fields due to the matured silicon-based microfabrication technique and the excellent physical properties of silicon material. However, the high thermal conductivity of silicon restricts its application in most thermal microdevices, especially devices comprising different temperature zones. In this work, a parylene-filled-trench technique was optimized to realize high-quality thermal isolation in silicon-based microdevices. Parylene C, a heat transfer barricading material, was deposited on parallel high-aspect-ratio trenches, which surrounded the isolated target zones. After removing the remnant silicon beneath the trenches by deep reactive ion etching from the back side, a high-quality heat transfer barrier was obtained. By using narrow trenches, only 5 µm thick parylene was required for a complete filling, which facilitated multi-layer interconnection thereafter. The parylene filling performance inside the high-aspect-ratio trench was optimized by two approaches: multiple etch–deposition cycling and trench profile controlling. A 4 × 6 array, in which each unit was kept at a constant temperature and was well thermally isolated individually, was achieved on a silicon substrate by using the present parylene-filled-trench technique. The preliminary experimental results indicated that the present parylene-filled-trench structure exhibited excellent thermal isolation performance, with a very low power requirement of 0.134 mW (K mm 2 ) −1 for heating the isolated silicon unit and a high thermal isolation efficiency of 72.5% between two adjacent units. Accompanied with high-quality isolation performance, the microdevices embedded the present parylene-filled-trench structure to retain a strong mechanical connection larger than 400 kPa between two isolated zones, which is very important for a high-reliability-required micro-electro-mechanical-system (MEMS) device. Considering its room

Experimental Study of Vibration Isolation Characteristics of a Geometric Anti-Spring Isolator

Directory of Open Access Journals (Sweden)

Lixun Yan

2017-07-01

Full Text Available In order to realize low-frequency vibration isolation, a novel geometric anti-spring isolator consisting of several cantilever blade springs are developed in this paper. The optimal design parameters of the geometric anti-spring isolator for different nonlinear geometric parameters are theoretically obtained. The transmissibility characteristic of the geometric anti-spring isolator is investigated through mathematical simulation. A geometric anti-spring isolator with a nonlinear geometric parameter of 0.92 is designed and its vibration isolation performance and nonlinearity characteristic is experimentally studied. The experiment results show that the designed isolator has good low-frequency vibration isolation performance, of which the initial isolation frequency is less than 3.6 Hz when the load weight is 21 kg. The jump phenomena of the response of the isolator under linear frequency sweep excitation are observed, and this result demonstrates that the geometric anti-spring isolator has a complex nonlinearity characteristics with the increment of excitation amplitude. This research work provides a theoretical and experimental basis for the application of the nonlinear geometric anti-spring low-frequency passive vibration isolation technology in engineering practice.

A Polymerase Chain Reaction-Based Method for Isolating Clones from a Complimentary DNA Library in Sheep

Science.gov (United States)

Friis, Thor Einar; Stephenson, Sally; Xiao, Yin; Whitehead, Jon

2014-01-01

The sheep (Ovis aries) is favored by many musculoskeletal tissue engineering groups as a large animal model because of its docile temperament and ease of husbandry. The size and weight of sheep are comparable to humans, which allows for the use of implants and fixation devices used in human clinical practice. The construction of a complimentary DNA (cDNA) library can capture the expression of genes in both a tissue- and time-specific manner. cDNA libraries have been a consistent source of gene discovery ever since the technology became commonplace more than three decades ago. Here, we describe the construction of a cDNA library using cells derived from sheep bones based on the pBluescript cDNA kit. Thirty clones were picked at random and sequenced. This led to the identification of a novel gene, C12orf29, which our initial experiments indicate is involved in skeletal biology. We also describe a polymerase chain reaction-based cDNA clone isolation method that allows the isolation of genes of interest from a cDNA library pool. The techniques outlined here can be applied in-house by smaller tissue engineering groups to generate tools for biomolecular research for large preclinical animal studies and highlights the power of standard cDNA library protocols to uncover novel genes. PMID:24447069

A design study for the isolation of the 281-3H retention basin at the Savannah River Site using the viscous liquid barrier technology

International Nuclear Information System (INIS)

Moridis, G.J.; Persoff, P.; Apps, J.; James, A.; Oldenburg, C.; McGrath, A.; Myer, L.; Pellerin, L.; Pruess, K.

1996-11-01

This report is a description of the design study for a pilot-scale field demonstration of the Viscous Liquid Barrier (VLB) technology, a new subsurface containment technology for waste isolation using a new generation of barrier liquids. The demonstration site was Retention Basin 281-3H, a shallow catchment basin at the Savannah River Site, which is contaminated mainly by radionuclides ( 137 Cs, 90 Sr, and 238 Pu). The goals of the field demonstration were (a) to demonstrate the ability to create a continuous subsurface barrier in order to isolate the contaminants, and (b) to demonstrate the continuity, performance, and integrity of the barrier. The site was characterized, and preliminary hydraulic conductivity data were obtained from core samples. Based on the site characteristics and the functional requirements, a conceptual model was developed, the barrier specifications were defined, and lance injection was selected as the emplacement method. The injection strategy for the subsurface conditions at the site was determined using numerical simulations. An appropriate variant of Colloidal Silica (CS) was selected as the barrier liquid based on its relative insensitivity to interactions with the site soils, and the formulation for optimum site performance was determined. A barrier verification strategy, including hydraulic, pneumatic, tracer, and geophysical methods, was developed. A lance water injection test was conducted in order to obtain representative estimates of the hydraulic conductivity and its distribution for the design of the barrier emplacement. The water injection test demonstrated the lack of permeable zones for CS injection, and a decision not to proceed with the barrier emplacement was reached

What drives technology-based distractions? A structural equation model on social-psychological factors of technology-based driver distraction engagement.

Science.gov (United States)

Chen, Huei-Yen Winnie; Donmez, Birsen

2016-06-01

With the proliferation of new mobile and in-vehicle technologies, understanding the motivations behind a driver's voluntary engagement with such technologies is crucial from a safety perspective, yet is complex. Previous literature either surveyed a large number of distractions that may be diverse, or too focuses on one particular activity, such as cell phone use. Further, earlier studies about social-psychological factors underlying driver distraction tend to focus on one or two factors in-depth, and those that examine a more comprehensive set of factors are often limited in their analyses methods. The present work considers a wide array of social-psychological factors within a structural equation model to predict their influence on a focused set of technology-based distractions. A better understanding of these facilitators can enhance the design of distraction mitigation strategies. We analysed survey responses about three technology-based driver distractions: holding phone conversations, manually interacting with cell phones, and adjusting the settings of in-vehicle technology, as well as responses on five social-psychological factors: attitude, descriptive norm, injunctive norm, technology inclination, and a risk/sensation seeking personality. Using data collected from 525 drivers (ages: 18-80), a structural equation model was built to analyse these social-psychological factors as latent variables influencing self-reported engagement in these three technology-based distractions. Self-reported engagement in technology-based distractions was found to be largely influenced by attitudes about the distractions. Personality and social norms also played a significant role, but technology inclination did not. A closer look at two age groups (18-30 and 30+) showed that the effect of social norms, especially of injunctive norm (i.e., perceived approvals), was less prominent in the 30+ age group, while personality remained a significant predictor for the 30+ age group but

Research on 3-D base isolation system applied to new power reactor 3-D seismic isolation device with rolling seal type air spring: Pt.2

International Nuclear Information System (INIS)

Junji Suhara; Ryoichiro Matsumoto; Shinsuke Oguri; Yasuo Okada; Kazuhiko Inoue; Kenji Takahashi

2005-01-01

A three dimensional seismic base isolation device was developed for heavy structures and buildings such as nuclear power reactor buildings. The device realizes 3-D isolation by combining a LRB (laminated rubber bearing) for horizontal isolation with an air spring for vertical isolation in series. In this study, scale models of the 3-D base isolation device were made and were tested to examine the dynamic properties and ultimate strengths of the device. The performance of the device under earthquake excitation was examined through shaking table tests of 1/7 scale models. As the results, it was confirmed that the device worked smoothly under the horizontal and vertical excitations, and that the theoretical formulae of the orifice damping could explain the test results. The high-pressure air springs of trial production were forced to burst to find out which factor influenced ultimate strength. It was confirmed from results of the burst test that the strength of the air spring depended upon the diameter of rolling part of the bellows and the number of layers of the reinforcing fibers. Judging from the results of the shaking table test and the burst test, the developed 3-D base isolation device was applicable to a nuclear power plant building. (authors)

Comparison of SISEC code simulations with earthquake data of ordinary and base-isolated buildings

International Nuclear Information System (INIS)

Wang, C.Y.; Gvildys, J.

1991-01-01

At Argonne National Laboratory (ANL), a 3-D computer program SISEC (Seismic Isolation System Evaluation Code) is being developed for simulating the system response of isolated and ordinary structures (Wang et al. 1991). This paper describes comparison of SISEC code simulations with building response data of actual earthquakes. To ensure the accuracy of analytical simulations, recorded data of full-size reinforced concrete structures located in Sendai, Japan are used in this benchmark comparison. The test structures consist of two three-story buildings, one base-isolated and the other one ordinary founded. They were constructed side by side to investigate the effect of base isolation on the acceleration response. Among 20 earthquakes observed since April 1989, complete records of three representative earthquakes, no.2, no.6, and no.17, are used for the code validation presented in this paper. Correlations of observed and calculated accelerations at all instrument locations are made. Also, relative response characteristics of ordinary and isolated building structures are investigated. (J.P.N.)

Antimicrobial resistance of Staphylococcus species isolated from Lebanese dairy-based products.

Science.gov (United States)

Zouhairi, O; Saleh, I; Alwan, N; Toufeili, I; Barbour, E; Harakeh, S

2012-12-04

The study evaluated the antimicrobial resistance of molecularly characterized strains of Staphylococcus aureus and S. saprophyticus isolated from 3 Lebanese dairy-based food products that are sometimes consumed raw: kishk, shanklish and baladi cheese. Suspected Staphylococcus isolates were identified initially using standard biochemical tests, then strains that were confirmed by polymerase chain reaction (29 S. aureus and 17 S. saprophyticus) were evaluated for their susceptibility to different antimicrobials. The highest levels of contamination with staphylococci were in baladi cheese. Resistance rates ranged from 67% to gentamicin to 94% to oxacillin and clindamycin. The results suggest that these locally made dairy-based foods may act as vehicles for the transmission of antimicrobial-resistant Staphylococcus spp.

Evaluation of the BioVigilant IMD-A, a novel optical spectroscopy technology for the continuous and real-time environmental monitoring of viable and nonviable particles. Part II. Case studies in environmental monitoring during aseptic filling, intervention assessments, and glove integrity testing in manufacturing isolators.

Science.gov (United States)

Miller, Michael J; Walsh, Michael R; Shrake, Jerry L; Dukes, Randall E; Hill, Daniel B

2009-01-01

This paper describes the use of the BioVigilant IMD-A, a real-time and continuous monitoring technology based on optical spectroscopy, to simultaneously and instantaneously detect, size, and enumerate both viable and nonviable particles in a variety of filling and transfer isolator environments during an aseptic fill, transfer of sterilized components, and filling interventions. Continuous monitoring of three separate isolators for more than 16 h and representing more than 28 m3 of air per isolator (under static conditions) yielded a mean viable particle count of zero (0) per cubic meter. Although the mean count per cubic meter was zero, the detection of very low levels of single viable particles was randomly observed in each of these sampling runs. No viable particles were detected during the manual transfer of sterilized components from transfer isolators into a filling isolator, and similar results were observed during an aseptic fill, a filling needle change-out procedure, and during disassembly, movement, and reassembly of a vibrating stopper bowl. During the continuous monitoring of a sample transfer port and a simulated mousehole, no viable particles were detected; however, when the sampling probe was inserted beyond the isolator-room interface, the IMD-A instantaneously detected and enumerated both viable and nonviable particles originating from the surrounding room. Data from glove pinhole studies showed no viable particles being observed, although significant viable particles were immediately detected when the gloves were removed and a bare hand was allowed to introduce microorganisms into the isolator. The IMD-A technology offers the industry an unprecedented advantage over growth-based bioaerosol samplers for monitoring the state of microbiological control in pharmaceutical manufacturing environments, and represents significant progress toward the acceptance of microbiology process analytical technology solutions for the industry.

Base Isolation for Seismic Retrofitting of a Multiple Building Structure: Evaluation of Equivalent Linearization Method

Directory of Open Access Journals (Sweden)

Massimiliano Ferraioli

2016-01-01

Full Text Available Although the most commonly used isolation systems exhibit nonlinear inelastic behaviour, the equivalent linear elastic analysis is commonly used in the design and assessment of seismic-isolated structures. The paper investigates if the linear elastic model is suitable for the analysis of a seismically isolated multiple building structure. To this aim, its computed responses were compared with those calculated by nonlinear dynamic analysis. A common base isolation plane connects the isolation bearings supporting the adjacent structures. In this situation, the conventional equivalent linear elastic analysis may have some problems of accuracy because this method is calibrated on single base-isolated structures. Moreover, the torsional characteristics of the combined system are significantly different from those of separate isolated buildings. A number of numerical simulations and parametric studies under earthquake excitations were performed. The accuracy of the dynamic response obtained by the equivalent linear elastic model was calculated by the magnitude of the error with respect to the corresponding response considering the nonlinear behaviour of the isolation system. The maximum displacements at the isolation level, the maximum interstorey drifts, and the peak absolute acceleration were selected as the most important response measures. The influence of mass eccentricity, torsion, and high-modes effects was finally investigated.

Discrimination of Single-Copy IS6110 DNA Fingerprints of Mycobacterium tuberculosis Isolates by High-Resolution Minisatellite-Based Typing

OpenAIRE

Lee, Ann S. G.; Tang, Lynn L. H.; Lim, Irene H. K.; Bellamy, Richard; Wong, Sin-Yew

2002-01-01

Seven isoniazid-resistant isolates with mutations in the NADH dehydrogenase (ndh) gene were molecularly typed by IS6110-based restriction fragment length polymorphism analysis. All seven isolates with the R268H mutation had identical 1.4-kb IS6110 fingerprints. High-resolution minisatellite-based typing discriminated five of these isolates; two isolates were identical.

Discrimination of single-copy IS6110 DNA fingerprints of Mycobacterium tuberculosis isolates by high-resolution minisatellite-based typing.

Science.gov (United States)

Lee, Ann S G; Tang, Lynn L H; Lim, Irene H K; Bellamy, Richard; Wong, Sin-Yew

2002-02-01

Seven isoniazid-resistant isolates with mutations in the NADH dehydrogenase (ndh) gene were molecularly typed by IS6110-based restriction fragment length polymorphism analysis. All seven isolates with the R268H mutation had identical 1.4-kb IS6110 fingerprints. High-resolution minisatellite-based typing discriminated five of these isolates; two isolates were identical.

Polymer Film-Based Screening and Isolation of Polylactic Acid (PLA)-Degrading Microorganisms.

Science.gov (United States)

Kim, Mi Yeon; Kim, Changman; Moon, Jungheun; Heo, Jinhee; Jung, Sokhee P; Kim, Jung Rae

2017-02-28

Polylactic acid (PLA) has been highlighted as an alternative renewable polymer for the replacement of petroleum-based plastic materials, and is considered to be biodegradable. On the other hand, the biodegradation of PLA by terminal degraders, such as microorganisms, requires a lengthy period in the natural environment, and its mechanism is not completely understood. PLA biodegradation studies have been conducted using mainly undefined mixed cultures, but only a few bacterial strains have been isolated and examined. For further characterization of PLA biodegradation, in this study, the PLA-degrading bacteria from digester sludge were isolated and identified using a polymer film-based screening method. The enrichment of sludge on PLA granules was conducted with the serial transference of a subculture into fresh media for 40 days, and the attached biofilm was inoculated on a PLA film on an agar plate. 3D optical microscopy showed that the isolates physically degraded the PLA film due to bacterial degradation. 16S rRNA gene sequencing identified the microbial colonies to be Pseudomonas sp. MYK1 and Bacillus sp. MYK2. The two isolates exhibited significantly higher specific gas production rates from PLA biodegradation compared with that of the initial sludge inoculum.

Multi-Tenant Isolation via Reconfigurable Networks

Energy Technology Data Exchange (ETDEWEB)

Aderholdt, Ferrol [Tennessee Technological Univ., Cookeville, TN (United States); Caldwell, Blake A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hicks, Susan Elaine [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Koch, Scott M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pelfrey, Daniel S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pogge, James R. [Tennessee Technological Univ., Cookeville, TN (United States); Scott, Stephen L. [Tennessee Technological Univ., Cookeville, TN (United States); Shipman, Galen M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sorrillo, Lawrence [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2014-12-01

High performance computing environments are often used for a wide variety of workloads ranging from simulation, data transformation and analysis, and complex workflows to name just a few. These systems may process data at various security levels but in so doing are often enclaved at the highest security posture. This approach places significant restrictions on the users of the system even when processing data at a lower security level and exposes data at higher levels of confidentiality to a much broader population than otherwise necessary. The traditional approach of isolation, while effective in establishing security enclaves poses significant challenges for the use of shared infrastructure in HPC environments. This report details current state-of-the-art in reconfigurable network enclaving through Software Defined Networking (SDN) and Network Function Virtualization (NFV) and their applicability to secure enclaves in HPC environments. SDN and NFV methods are based on a solid foundation of system wide virtualization. The purpose of which is very straight forward, the system administrator can deploy networks that are more amenable to customer needs, and at the same time achieve increased scalability making it easier to increase overall capacity as needed without negatively affecting functionality. The network administration of both the server system and the virtual sub-systems is simplified allowing control of the infrastructure through well-defined APIs (Application Programming Interface). While SDN and NFV technologies offer significant promise in meeting these goals, they also provide the ability to address a significant component of the multi-tenant challenge in HPC environments, namely resource isolation. Traditional HPC systems are built upon scalable high-performance networking technologies designed to meet specific application requirements. Dynamic isolation of resources within these environments has remained difficult to achieve. SDN and NFV methodology

Seismic response analysis of a piping system subjected to multiple support excitations in a base isolated NPP building

International Nuclear Information System (INIS)

Surh, Han-Bum; Ryu, Tae-Young; Park, Jin-Sung; Ahn, Eun-Woo; Choi, Chul-Sun; Koo, Ja Choon; Choi, Jae-Boong; Kim, Moon Ki

2015-01-01

Highlights: • Piping system in the APR 1400 NPP with a base isolation design is studied. • Seismic response of piping system in base isolated building are investigated. • Stress classification method is examined for piping subjected to seismic loading. • Primary stress of piping is reduced due to base isolation design. • Substantial secondary stress is observed in the main steam piping. - Abstract: In this study, the stress response of the piping system in the advanced power reactor 1400 (APR 1400) with a base isolation design subjected to seismic loading is addressed. The piping system located between the auxiliary building with base isolation and the turbine building with a fixed base is considered since it can be subjected to substantial relative support movement during seismic events. First, the support responses with respect to the base characteristic are investigated to perform seismic analysis for multiple support excitations. Finite element analyses are performed to predict the piping stress response through various analysis methods such as the response spectrum, seismic support movement and time history method. To separately evaluate the inertial effect and support movement effect on the piping stress, the stress is decomposed into a primary and secondary stress using the proposed method. Finally, influences of the base isolation design on the piping system in the APR 1400 are addressed. The primary stress based on the inertial loading is effectively reduced in a base isolation design, whereas a considerable amount of secondary stress is generated in the piping system connecting a base isolated building with a fixed base building. It is also confirmed that both the response spectrum analysis and seismic support movement analysis provide more conservative estimations of the piping stress compared to the time history analysis

Automatic generation of smart earthquake-resistant building system: Hybrid system of base-isolation and building-connection

Directory of Open Access Journals (Sweden)

M. Kasagi

2016-02-01

Full Text Available A base-isolated building may sometimes exhibit an undesirable large response to a long-duration, long-period earthquake ground motion and a connected building system without base-isolation may show a large response to a near-fault (rather high-frequency earthquake ground motion. To overcome both deficiencies, a new hybrid control system of base-isolation and building-connection is proposed and investigated. In this new hybrid building system, a base-isolated building is connected to a stiffer free wall with oil dampers. It has been demonstrated in a preliminary research that the proposed hybrid system is effective both for near-fault (rather high-frequency and long-duration, long-period earthquake ground motions and has sufficient redundancy and robustness for a broad range of earthquake ground motions.An automatic generation algorithm of this kind of smart structures of base-isolation and building-connection hybrid systems is presented in this paper. It is shown that, while the proposed algorithm does not work well in a building without the connecting-damper system, it works well in the proposed smart hybrid system with the connecting damper system.

Mechanical Systems based on Dry Friction Force used for Building Isolation against Seismic Actions

Directory of Open Access Journals (Sweden)

Fanel Dorel Şcheaua

2017-11-01

Full Text Available Today there are multiple solutions intended to avoid the earthquake damaging effects on building structures. There are methods based on the use of special mechanical systems attached directly to the structure's resistance frames, by means of which an improved building behavior is achieved during the earthquake. The systems used work on the principle of structure base isolation based on the dry friction force (Coulomb friction. Some constructive types of these isolation systems patterns are described in this paper

Implementation of Technology-based Patient Engagement Strategies within Practice-based Research Networks.

Science.gov (United States)

Careyva, Beth; Shaak, Kyle; Mills, Geoffrey; Johnson, Melanie; Goodrich, Samantha; Stello, Brian; Wallace, Lorraine S

2016-01-01

Technology-based patient engagement strategies (such as patient portals) are increasingly available, yet little is known about current use and barriers within practice-based research networks (PBRNs). PBRN directors have unique opportunities to inform the implementation of patient-facing technology and to translate these findings into practice. PBRN directors were queried regarding technology-based patient engagement strategies as part of the 2015 CAFM Educational Research Alliance (CERA) survey of PBRN directors. A total of 102 PBRN directors were identified via the Agency for Healthcare Research and Quality's registry; 54 of 96 eligible PBRN directors completed the survey, for a response rate of 56%. Use of technology-based patient engagement strategies within PBRNs was limited, with less than half of respondents reporting experience with the most frequently named tools (risk assessments/decision aids). Information technology (IT) support was the top barrier, followed by low rates of portal enrollment. For engaging participant practices, workload and practice leadership were cited as most important, with fewer respondents noting concerns about patient privacy. Given limited use of patient-facing technologies, PBRNs have an opportunity to clarify the optimal use of these strategies. Providing IT support and addressing clinician concerns regarding workload may facilitate the inclusion of innovative technologies in PBRNs. © Copyright 2016 by the American Board of Family Medicine.

Biogenic amines degradation by microorganisms isolated from cheese

Directory of Open Access Journals (Sweden)

Irena Butor

2017-01-01

Full Text Available The aim of this study was the isolation and characterization of microorganisms able to degrade biogenic amines and their identification. Individual microorganisms were obtained by isolation from commercially available foodstuffs and food produced in the technological laboratories of Faculty of Technology, Tomas Bata University in Zlín and subsequently identified by MALDI-TOF MS. The results of MALDI-TOF MS identification were verified by 16S rRNA sequenation. In this work was studied the ability of 5 bacterial strains positive to biogenic amines degradation isolated from dairy products to decrease biogenic amines content in vitro and quantified reduction in the concentration of biogenic amines tryptamine, β-phenylethylamine, putrescine, cadaverine, histamine and tyramine. The level of degradation (decrease of biogenic amines was determined on the base of the ability to grow in media with biogenic amines as the sole source carbon and nitrogen. The isolated strains with the ability of degradation of one or more biogenic amines were cultured in medium supplemented with relevant biogenic amines, the media derivatized with dansyl chloride and these amines separated by HPLC at a wavelength of 254 nm. From five tested strains identified as Bacillus subtilis, Bacillus pumilus, Enterobacter cloacae, Rhizobium radiobacter and Acinetobacter pitii, isolated from gouda type cheese, the greatest ability of degradation was observed in Bacillus subtilis, which was capable to degrade almost all amount of histamine, cadaverine and putrescine. Other four strains showed a lower rate of degradation than Bacillus subtilis, but the ability to degrade biogenic amines with these microorganisms was still significant.

Identification of listeria species isolated in Tunisia by Microarray based assay : results of a preliminary study

International Nuclear Information System (INIS)

Hmaied, Fatma; Helel, Salma; Barkallah, Insaf; Leberre, V.; Francois, J.M.; Kechrid, A.

2008-01-01

Microarray-based assay is a new molecular approach for genetic screening and identification of microorganisms. We have developed a rapid microarray-based assay for the reliable detection and discrimination of Listeria spp. in food and clinical isolates from Tunisia. The method used in the present study is based on the PCR amplification of a virulence factor gene (iap gene). the PCR mixture contained cyanine Cy5labeled dCTP. Therefore, The PCR products were fluorescently labeled. The presence of multiple species-specific sequences within the iap gene enabled us to design different oligoprobes per species. The species-specific sequences of the iap gene used in this study were obtained from genBank and then aligned for phylogenetic analysis in order to identify and retrieve the sequences of homologues of the amplified iap gene analysed. 20 probes were used for detection and identification of 22 food isolates and clinical isolates of Listeria spp (L. monocytogenes, L. ivanovi), L. welshimeri, L. seeligeri, and L. grayi). Each bacterial gene was identified by hybridization to oligoprobes specific for each Listeria species and immobilized on a glass surface. The microarray analysis showed that 5 clinical isolates and 2 food isolates were identified listeria monocytogenes. Concerning the remaining 15 food isolates; 13 were identified listeria innocua and 2 isolates could not be identified by microarray based assay. Further phylogenetic and molecular analysis are required to design more species-specific probes for the identification of Listeria spp. Microarray-based assay is a simple and rapid method used for Listeria species discrimination

Lidar technologies for airborne and space-based applications

International Nuclear Information System (INIS)

Henson, T.D.; Schmitt, R.L.; Sobering, T.J.; Raymond, T.D.; Stephenson, D.A.

1994-10-01

This study identifies technologies required to extend the capabilities of airborne light detection and ranging (lidar) systems and establish the feasibility of autonomous space-based lidars. Work focused on technologies that enable the development of a lightweight, low power, rugged and autonomous Differential Absorption Lidar (DIAL) instruments. Applications for airborne or space-based DIAL include the measurement of water vapor profiles in support of climate research and processing-plant emissions signatures for environmental and nonproliferation monitoring. A computer-based lidar performance model was developed to allow trade studies to be performed on various technologies and system configurations. It combines input from the physics (absorption line strengths and locations) of the problem, the system requirements (weight, power, volume, accuracy), and the critical technologies available (detectors, lasers, filters) to produce the best conceptual design. Conceptual designs for an airborne and space-based water vapor DIAL, and a detailed design of a ground-based water vapor DIAL demonstration system were completed. Future work planned includes the final testing, integration, and operation of the demonstration system to prove the capability of the critical enabling technologies identified

Thyristor based short circuit current injection in isolated grids

OpenAIRE

Hoff, Bjarte; Sharma, Pawan; Østrem, Trond

2017-01-01

This paper proposes a thyristor based short circuit current injector for providing short circuit current in isolated and weak grids, where sufficient fault current to trigger circuit breakers may not be available. This will allow the use of conventional miniature circuit breakers, which requires high fault current for instantaneous tripping. The method has been validated through experiments.

Dignity and Deferral Narratives as Strategies in Facilitated Technology-Based Support Groups for People with Advanced Cancer

Directory of Open Access Journals (Sweden)

Annette F. Street

2012-01-01

Full Text Available This paper examines the value of facilitated telephone and online support groups for palliative care. Telephone interviews were conducted with twenty people living with advanced cancer who had participated in either a telephone or online support group facilitated by the Cancer Council Victoria, Melbourne, Australia. Two dominant participant narratives emerged: a focus on dying with dignity or an interest in deferring discussion of death and dying to focus on the present. Despite the different approaches, participants found the technology-based support groups to be accessible and safe environments in which to discuss difficult topics in privacy. Technology-based strategies provide opportunities for health professionals to provide social and emotional care to more people by moving beyond individualised care and facilitate peer-to-peer support at the end of life, especially to those with specific needs. Such options are feasible for palliative care services to set up and acceptable to a group of clients, especially for younger clients or those socially or geographically isolated.

Home-based Healthcare Technology

DEFF Research Database (Denmark)

Verdezoto, Nervo

of these systems target a specific treatment or condition and might not be sufficient to support the care management work at home. Based on a case study approach, my research investigates home-based healthcare practices and how they can inform future design of home-based healthcare technology that better account......Sustaining daily, unsupervised healthcare activities in non-clinical settings such as the private home can challenge, among others, older adults. To support such unsupervised care activities, an increasingly number of reminders and monitoring systems are being designed. However, most...

Sensitivity of Base-Isolated Systems to Ground Motion Characteristics: A Stochastic Approach

International Nuclear Information System (INIS)

Kaya, Yavuz; Safak, Erdal

2008-01-01

Base isolators dissipate energy through their nonlinear behavior when subjected to earthquake-induced loads. A widely used base isolation system for structures involves installing lead-rubber bearings (LRB) at the foundation level. The force-deformation behavior of LRB isolators can be modeled by a bilinear hysteretic model. This paper investigates the effects of ground motion characteristics on the response of bilinear hysteretic oscillators by using a stochastic approach. Ground shaking is characterized by its power spectral density function (PSDF), which includes corner frequency, seismic moment, moment magnitude, and site effects as its parameters. The PSDF of the oscillator response is calculated by using the equivalent-linearization techniques of random vibration theory for hysteretic nonlinear systems. Knowing the PSDF of the response, we can calculate the mean square and the expected maximum response spectra for a range of natural periods and ductility values. The results show that moment magnitude is a critical factor determining the response. Site effects do not seem to have a significant influence

Keep in Touch (KIT): feasibility of using internet-based communication and information technology in palliative care.

Science.gov (United States)

Guo, Qiaohong; Cann, Beverley; McClement, Susan; Thompson, Genevieve; Chochinov, Harvey Max

2017-05-06

Confinement to an in-patient hospital ward impairs patients' sense of social support and connectedness. Providing the means, through communication technology, for patients to maintain contact with friends and family can potentially improve well-being at the end of life by minimizing social isolation and facilitating social connection. This study aimed to explore the feasibility of introducing internet-based communication and information technologies for in-patients and their families and to describe their experience in using this technology. A cross-sectional survey design was used to describe patient and family member experiences in using internet-based communication technology and health care provider views of using such technology in palliative care. Participants included 13 palliative in-patients, 38 family members, and 14 health care providers. An iPad or a laptop computer with password-protected internet access was loaned to each patient and family member for about two weeks or they used their own electronic devices for the duration of the patient's stay. Quantitative and qualitative data were collected from patients, families, and health care providers to discern how patients and families used the technology, its ease of use and its impact. Descriptive statistics and paired sample t-tests were used to analyze quantitative data; qualitative data were analyzed using constant comparative techniques. Palliative patients and family members used the technology to keep in touch with family and friends, entertain themselves, look up information, or accomplish tasks. Most participants found the technology easy to use and reported that it helped them feel better overall, connected to others and calm. The availability of competent, respectful, and caring technical support personnel was highly valued by patients and families. Health care providers identified that computer technology helped patients and families keep others informed about the patient's condition, enabled

Technology base for microgravity horticulture

Science.gov (United States)

Sauer, R. L.; Magnuson, J. W.; Scruby, R. R.; Scheld, H. W.

1987-01-01

Advanced microgravity plant biology research and life support system development for the spacecraft environment are critically hampered by the lack of a technology base. This inadequacy stems primarily from the fact that microgravity results in a lack of convective currents and phase separation as compared to the one gravity environment. A program plan is being initiated to develop this technology base. This program will provide an iterative flight development effort that will be closely integrated with both basic science investigations and advanced life support system development efforts incorporating biological processes. The critical considerations include optimum illumination methods, root aeration, root and shoot support, and heat rejection and gas exchange in the plant canopy.

Electricity-free, sequential nucleic acid and protein isolation.

Science.gov (United States)

Pawlowski, David R; Karalus, Richard J

2012-05-15

Traditional and emerging pathogens such as Enterohemorrhagic Escherichia coli (EHEC), Yersinia pestis, or prion-based diseases are of significant concern for governments, industries and medical professionals worldwide. For example, EHECs, combined with Shigella, are responsible for the deaths of approximately 325,000 children each year and are particularly prevalent in the developing world where laboratory-based identification, common in the United States, is unavailable (1). The development and distribution of low cost, field-based, point-of-care tools to aid in the rapid identification and/or diagnosis of pathogens or disease markers could dramatically alter disease progression and patient prognosis. We have developed a tool to isolate nucleic acids and proteins from a sample by solid-phase extraction (SPE) without electricity or associated laboratory equipment (2). The isolated macromolecules can be used for diagnosis either in a forward lab or using field-based point-of-care platforms. Importantly, this method provides for the direct comparison of nucleic acid and protein data from an un-split sample, offering a confidence through corroboration of genomic and proteomic analysis. Our isolation tool utilizes the industry standard for solid-phase nucleic acid isolation, the BOOM technology, which isolates nucleic acids from a chaotropic salt solution, usually guanidine isothiocyanate, through binding to silica-based particles or filters (3). CUBRC's proprietary solid-phase extraction chemistry is used to purify protein from chaotropic salt solutions, in this case, from the waste or flow-thru following nucleic acid isolation(4). By packaging well-characterized chemistries into a small, inexpensive and simple platform, we have generated a portable system for nucleic acid and protein extraction that can be performed under a variety of conditions. The isolated nucleic acids are stable and can be transported to a position where power is available for PCR amplification

Utilities/industries joint study on seismic isolation systems for LWR: Part II. Observed behaviors of base-isolated general buildings under real earthquakes

International Nuclear Information System (INIS)

Matsumura, Takao; Sato, Shoji; Kato, Muneaki

1989-01-01

This paper describes the observed behavior of base-isolated buildings under real earthquake conditions. These buildings were constructed by five construction companies participating in the Joint Study on Seismic Isolation Systems for lightwater reactors. All the buildings are medium- or low-height buildings of reinforced-concrete structures with combinations of laminated rubber bearing or sliding bearings and various damping devices

Stability Analysis for Isolated AC Microgrids Based on PV-Active Generators

DEFF Research Database (Denmark)

Aldana, Nelson Leonardo Diaz; Coelho, Ernane A. A.; Quintero, Juan Carlos Vasquez

2015-01-01

The current trend in isolated microgrids is oriented to distributed renewable energy generators, such as photovoltaic (PV) generators and their corresponding distributed energy storage systems (ESS) as an unit denoted as active generator (PV+ESS). In an isolated microgrid, every distributed...... for all the distributed generators. In particular, ESS’s based on batteries require at least two different mode of charge. As consequence, the topological operation mode of the microgrid is affected by the changes of the operation mode of each distributed generator. Typically, droop control loops are used...... for interconnecting several different distributed generators in parallel to a common bus, whose parameters determine the stability and damping of the microgrid operation. In this paper, a small-signal stability analysis is applied to an isolated AC microgrid composed of (PV+ESS) active generators, regarding three...

A PCR-based strategy for simple and rapid identification of rough presumptive Salmonella isolates

DEFF Research Database (Denmark)

Hoorfar, Jeffrey; Baggesen, Dorte Lau; Porting, P.H.

1999-01-01

The purpose of the present study was to investigate the application of ready-to-go Salmonella PCR tests, based on dry chemistry, for final identification of rough presumptive Salmonella isolates. The results were compared with two different biotyping methods performed at two different laboratories......, which did not result in any DNA band. A total of 32 out of the 36 rough presumptive isolates were positive in the PCR. All but one isolate were also identified as Salmonella by the two biochemical methods. All 80 Salmonella strains were also tested in the two multiplex serogroup tests based on PCR beads....... The sensitivity of the BAX Salmonella PCR test was assessed by testing a total of 80 Salmonella isolates, covering most serogroups, which correctly identified all the Salmonella strains by resulting in one 800-bp band in the sample tubes. The specificity of the PCR was assessed using 20 non-Salmonella strains...

New technology-based recruitment methods

OpenAIRE

Oksanen, Reija

2018-01-01

The transformation that recruitment might encounter due to big data analytics and artificial intelligence (AI) is particularly fascinating which is why this thesis focuses on the changes recruitment processes are and will be facing as new technological solutions are emerging. The aim and main objective of this study is to widen knowledge about new technology-based recruitment methods, focusing on how they are utilized by Finnish recruitment professionals and how the opportunities and risks th...

Comparison of technology-based cooperative learning with technology-based individual learning in enhancing fundamental nursing proficiency.

Science.gov (United States)

Lin, Zu-Chun

2013-05-01

The aim of nursing education is to prepare students with critical thinking, high interests in profession and high proficiency in patient care. Cooperative learning promotes team work and encourages knowledge building upon discussion. It has been viewed as one of the most powerful learning methods. Technology has been considered an influential tool in teaching and learning. It assists students in gathering more information to solve the problems and master skills better. The purpose of this study was to compare the effect of technology-based cooperative learning with technology-based individual learning in nursing students' critical thinking in catheterization knowledge gaining, error discovering, skill acquisitions, and overall scores. This study used a pretest-posttest experimental design. Ninety-eight students were assigned randomly to one of two groups. Questionnaires and tests were collected at baseline and after completion of intervention. The results of this study showed that there was no significant difference in related catheterization skill performance. However, the remaining variables differed greatly between the two groups. CONCLUSIONS AND APPLICATIONS: This study's findings guide the researchers and instructors to use technology-based cooperative learning more appropriately. Future research should address the design of the course module and the availability of mobile devices to reach student-centered and learn on the move goals. Copyright © 2011 Elsevier Ltd. All rights reserved.

Optimal design of base isolation and energy dissipation system for nuclear power plant structures

International Nuclear Information System (INIS)

Zhou Fulin

1991-01-01

This paper suggests the method of optimal design of base isolation and energy dissipation system for earthquake resistant nuclear power plant structures. This method is based on dynamic analysis, shaking table tests for a 1/4 scale model, and a great number of low cycle fatigue failure tests for energy dissipating elements. A set of calculation formulas for optimal design of structures with base isolation and energy dissipation system were introduced, which are able to be used in engineering design for earthquake resistant nuclear power plant structures or other kinds of structures. (author)

Shock and vibration technology with applications to electrical systems

Science.gov (United States)

Eshleman, R. L.

1972-01-01

A survey is presented of shock and vibration technology for electrical systems developed by the aerospace programs. The shock environment is surveyed along with new techniques for modeling, computer simulation, damping, and response analysis. Design techniques based on the use of analog computers, shock spectra, optimization, and nonlinear isolation are discussed. Shock mounting of rotors for performance and survival, and vibration isolation techniques are reviewed.

Velocity effect on aptamer-based circulating tumor cell isolation in microfluidic devices.

Science.gov (United States)

Wan, Yuan; Tan, Jifu; Asghar, Waseem; Kim, Young-tae; Liu, Yaling; Iqbal, Samir M

2011-12-01

The isolation and detection of rare circulating tumor cells (CTCs) has been one of the focuses of intense research recently. In a microfluidic device, a number of factors can influence the enrichment capability of surface-bound probe molecules. This article analyzes the important factor of flow velocity in a microfluidic channel. The competition of surface-grafted anti-EGFR aptamers to bind the overexpressed EGFR on cell membranes against the drag force from the fluid flow is an important efficiency determining factor. The flow rate variations are applied both in experiments and in simulation models to study their effects on CTC capture efficiency. A mixture of mononuclear cells and human Glioblastoma cells is used to isolate cancer cells from the cellular flow. The results show interdependence between the adhesion probability, isolation efficiency, and flow rate. This work can help in designing flow-through lab-on-chip devices that use surface-bound probe affinities against overexpressed biomarkers for cell isolation. This work demonstrates that microfluidic based approaches have strong potential applications in CTC detection and isolation. © 2011 American Chemical Society

A Study on the Development of Prototype Seismic Isolation Device for NPP

Energy Technology Data Exchange (ETDEWEB)

Lee, Hongpyo; Cho, Myungsug; Kim, Sunyong; Lee, Yonghee; Kang Kyunghun [KHNP-CRI, Daejeon (Korea, Republic of)

2014-05-15

Korean nuclear power plants have been and still are based on seismic resistance design including all of the natural disasters. However, in regions of high seismic hazard, seismic isolation technology is needed to guarantee the seismic safety on nuclear power plants. To achieve this purpose, the research and development of seismic isolation system for the construction in high seismicity area is on-going in Korea. In this study, prototype seismic isolation devices as mentioned above are developed and tested to identify the basic shear and compressive characteristics of them. In this study, assessment performance of basic characteristics on the prototype LRB and EQS seismic isolation for nuclear power plant structures is employed to compare with design values. Based on the test results of compression and shear characteristics, it is judged that they meet the measuring efficiency range conditions which are presented in ISO 22762 and AASHOT guide specification. Therefore, prototype seismic isolation devices like LRB and EQS developed in this study can be expected to be used as reference data when designing a seismic isolation system for nuclear power plant structures in the future.

WEB-BASED DATABASE ON RENEWAL TECHNOLOGIES ...

Science.gov (United States)

As U.S. utilities continue to shore up their aging infrastructure, renewal needs now represent over 43% of annual expenditures compared to new construction for drinking water distribution and wastewater collection systems (Underground Construction [UC], 2016). An increased understanding of renewal options will ultimately assist drinking water utilities in reducing water loss and help wastewater utilities to address infiltration and inflow issues in a cost-effective manner. It will also help to extend the service lives of both drinking water and wastewater mains. This research effort involved collecting case studies on the use of various trenchless pipeline renewal methods and providing the information in an online searchable database. The overall objective was to further support technology transfer and information sharing regarding emerging and innovative renewal technologies for water and wastewater mains. The result of this research is a Web-based, searchable database that utility personnel can use to obtain technology performance and cost data, as well as case study references. The renewal case studies include: technologies used; the conditions under which the technology was implemented; costs; lessons learned; and utility contact information. The online database also features a data mining tool for automated review of the technologies selected and cost data. Based on a review of the case study results and industry data, several findings are presented on tren

Mobil/Badger to market zeolite-based cumene technology

International Nuclear Information System (INIS)

Rotman, D.

1993-01-01

Badger (Cambridge, MA) and Mobil (Fairfax, VA) are ready to jointly license a new cumene technology that they say achieves higher yields and product purity than existing processes. The zeolite-based technology is scheduled to be introduced at next month's DeWitt Petrochemical Review in Houston. The Mobil/Badger technology aims to challenge the dominant position of UOP's (Des Plaines, IL) solid phosphoric acid (SPA) catalyst process - which accounts for 80%-90% of the world's cumene production. In addition, Monsanto/Kellogg's aluminum chloride-based technology has gained significant momentum since its introduction in the 1980s. And late last year, ABB Lummus Crest (Bloomfield, NJ) also began marketing a zeolite-based cumene technology. While all the technologies make cumene via the alkylation of benzene with propylene, the Mobil/Badger process uses a zeolite-containing catalyst designed by Mobil to selectively catalyze the benzene/propylene reaction, avoiding unwanted propylene oligomerization. Because the olefin reactions are so fast, says Frank A. Demers, Badger's v.p./technology development and marketing, other zeolite technologies are forced to use complex reactor arrangements to stop the propylene-propylene reactions. However, he says, 'Mobil has designed a catalyst that wants to react benzene with propylene to make cumene.'

Lactic acid bacteria from Sheep's Dhan, a traditional butter from sheep's milk: Isolation, identification and major technological traits

Energy Technology Data Exchange (ETDEWEB)

Idoui, T.; Boudjerda, J.; Leghouchi, E.; Karam, N. E.

2009-07-01

Twenty six lactic acid bacteria were isolated from sheep's Dhan, a traditional butter made from sheep's milk in Jijel (East of Algeria). These strains belong to three genera: Lactococcus, Leuconostoc and Lactobacillus. The results showed that Lactococcus lactic ssp diacetylactis was the predominant species in this traditional butter. The results of the assessment of the technological aptitude indicate that a major strain has a good acidification aptitude, some of them show good proteolytic activity and only Leuconostoc mesenteroides ssp. dextranicum isolates were able to produce exo polysaccharide. (Author) 42 refs.

A home-based individualized information communication technology training program for older adults: a demonstration of effectiveness and value.

Science.gov (United States)

Arthanat, Sajay; Vroman, Kerryellen G; Lysack, Catherine

2016-01-01

To demonstrate the effectiveness and value of a home-based information communication technology (ICT) training program for older adults. Thirteen older adults were provided in-home ICT training by graduate occupational therapy students using an iPad. The breadth and frequency of ICT use, perspectives on technology, and perceived independence were recorded at baseline, during the 3-month training and at follow-up, along with an end-of-study questionnaire. Non-parametric Friedman analysis was conducted to verify trends in the outcome measures. The qualitative data were examined by content analysis. Participants' breadth of ICT activities showed a significant trend across 6 months. Leisure accounted for the significant increase, while health management and social connections activities increased modestly. A positive trend in participants' perspectives on technology was evident along with a marginal increase in perceived independence. Participants' perspectives were thematically categorized as technology experiences, interactions with coach, training approach, and specific activities. As reflection of the training program's value, 12 of the 13 participants took ownership of the iPad at the end of the study. Building capacity of older adults to utilize the multifaceted potential of ICT is critical in addressing declines in health, impending disabilities, and social isolation. Implications for Rehabilitation A one-on-one home-based individualized information communication technology (ICT) training program for older adults could result in a progressive increase in the breadth of online activities carried out by them. Specifically, the increase in their usage of ICT could be expected in leisure-based online activities. Individualized training programs designed based on needs, priorities, and learning style of older adults could have a positive impact on their technological perspectives and intrinsic motivation to adopt ICT.

Floor Response Spectra of a Base Isolated Auxiliary Building in Different Temperature Environments

International Nuclear Information System (INIS)

Park, Junhee; Choun, Youngsun; Choi, Inkil

2013-01-01

It is necessary to investigate the aging effect of degradation factors and to evaluate the seismic response of base isolated NPPs with age-related degradation. In this study, the seismic responses for NPPs using high damping rubber bearing with age-related degradation in different temperature were investigated by performing a nonlinear time history analysis. The floor response spectrums (FRS) were presented with time in different temperature environments. The degradation of HRB is found to be particularly sensitive to the ambient temperature. The increase of HRB stiffness leads to the increase of FRS it was observed that the seismic demand for equipment located in the AUX was changed. Therefore it is required that the seismic evaluation for the isolation system (e. g. isolators, equipment located in isolated structure) is performed considering the temperature environments. From the seismic fragility analysis, the seismic capacity of cabinet was affected by the degradation of HRB. Therefore the isolators in the isolated buildings should be carefully designed and manufactured considering the degradation during the life time

Effect of Nonlinear Hardening of Lead Rubber Bearing on Long Term Behavior of Base Isolated Containment Building

International Nuclear Information System (INIS)

Park, Junhee; Choun, Young-Sun; Kim, Min-Kyu

2015-01-01

The rubber material used in laminated rubber bearings is the hyper elastic material whose stress-strain relationship can be defined as nonlinearly elastic. From the previous research, it was presented that the rubber hardness and stiffness was increased by the aging of LRB. The mechanical properties of LRB changed by aging can directly affect a nonlinear hardening behavior. Therefore it is needed to consider the nonlinear hardening effect for exactly evaluating the seismic safety of base isolated structure during the life time. In this study, the seismic response analysis of base isolated containment building was performed by using the bilinear model and the hardening model to identify the effect of structural response on the nonlinear hardening behavior of isolator. Moreover the floor response spectrum of base isolated structure considering the aging was analyzed by according to the analysis model of LRB.. The hardening behavior of lead rubber bearing occurs at high strain. Therefore it is reasonable to assume that the hysteretic model of LRB is the nonlinear hardening model for exactly evaluating the seismic response of base isolated structure. The nonlinear analysis of base isolated containment was performed by using the nonlinear hardening variables which was resulted from the test results and finite element analysis. From the analysis results, it was represented that the FRS was higher about 40% with nonlinear hardening model than with the bilinear model. Therefore the seismic response of base isolated structure with bilinear model can be underestimated than the real response. It is desired that the nonlinear hardening model of LRB is applied for the seismic risk evaluation requiring the ultimate state of LRB

Isolated hypoglossal nerve palsy due to skull base metastasis from breast cancer

International Nuclear Information System (INIS)

Pavithran, K.; Doval, D.C.; Hukku, S.; Jena, A.

2001-01-01

We describe a 44-year-old woman who presented with an isolated unilateral hypoglossal nerve paralysis caused by a skull base metastasis from breast cancer. The patient had a modified radical mastectomy followed by local radiotherapy and adjuvant chemotherapy. Fourteen months later she presented with difficulty in speaking. Physical examination revealed an isolated left hypoglossal nerve paralysis. The MRI scan showed a mass lesion involving the left occipital condyle extending into hypoglossal canal. Copyright (2001) Blackwell Science Pty Ltd

Applicability of base-isolation R and D in non-reactor facilities to a nuclear reactor plant

International Nuclear Information System (INIS)

Seidensticker, R.W.

1989-01-01

Seismic isolation is gaining increased attention worldwide for use in a wide spectrum of critical facilities, ranging from hospitals and computing centers to nuclear power plants. While the fundamental principles and technology are applicable to all of these facilities, the degree of assurance that the actual behavior of the isolation systems is as specified varies with the nature of the facility involved. Obviously, the level of effort to provide such assurance for a nuclear power plant will be much greater than that required for, say, a critical computer facility. This paper reviews the research and development (R and D) programs ongoing for seismic isolation in non-nuclear facilities and related experience and makes a preliminary assessment of the extent to which such R and D and experience can be used for nuclear power plant application. Ways are suggested to improve the usefulness of such non-nuclear R and D in providing the high level of confidence required for the use of seismic isolation in a nuclear reactor plant

Comparative DNA isolation behaviours of silica and polymer based sorbents in batch fashion: monodisperse silica microspheres with bimodal pore size distribution as a new sorbent for DNA isolation.

Science.gov (United States)

Günal, Gülçin; Kip, Çiğdem; Eda Öğüt, S; İlhan, Hasan; Kibar, Güneş; Tuncel, Ali

2018-02-01

Monodisperse silica microspheres with bimodal pore-size distribution were proposed as a high performance sorbent for DNA isolation in batch fashion under equilibrium conditions. The proposed sorbent including both macroporous and mesoporous compartments was synthesized 5.1 μm in-size, by a "staged shape templated hydrolysis and condensation method". Hydrophilic polymer based sorbents were also obtained in the form of monodisperse-macroporous microspheres ca 5.5 μm in size, with different functionalities, by a developed "multi-stage microsuspension copolymerization" technique. The batch DNA isolation performance of proposed material was comparatively investigated using polymer based sorbents with similar morphologies. Among all sorbents tried, the best DNA isolation performance was achieved with the monodisperse silica microspheres with bimodal pore size distribution. The collocation of interconnected mesoporous and macroporous compartments within the monodisperse silica microspheres provided a high surface area and reduced the intraparticular mass transfer resistance and made easier both the adsorption and desorption of DNA. Among the polymer based sorbents, higher DNA isolation yields were achieved with the monodisperse-macroporous polymer microspheres carrying trimethoxysilyl and quaternary ammonium functionalities. However, batch DNA isolation performances of polymer based sorbents were significantly lower with respect to the silica microspheres.

Model-Based Fault Detection and Isolation of a Liquid-Cooled Frequency Converter on a Wind Turbine

DEFF Research Database (Denmark)

Li, Peng; Odgaard, Peter Fogh; Stoustrup, Jakob

2012-01-01

advanced fault detection and isolation schemes. In this paper, an observer-based fault detection and isolation method for the cooling system in a liquid-cooled frequency converter on a wind turbine which is built up in a scalar version in the laboratory is presented. A dynamic model of the scale cooling...... system is derived based on energy balance equation. A fault analysis is conducted to determine the severity and occurrence rate of possible component faults and their end effects in the cooling system. A method using unknown input observer is developed in order to detect and isolate the faults based...... on the developed dynamical model. The designed fault detection and isolation algorithm is applied on a set of measured experiment data in which different faults are artificially introduced to the scaled cooling system. The experimental results conclude that the different faults are successfully detected...

Non-linear seismic response of base-isolated liquid storage tanks to bi-directional excitation

International Nuclear Information System (INIS)

Shrimali, M.K.; Jangid, R.S.

2002-01-01

Seismic response of the liquid storage tanks isolated by lead-rubber bearings is investigated for bi-directional earthquake excitation (i.e. two horizontal components). The biaxial force-deformation behaviour of the bearings is considered as bi-linear modelled by coupled non-linear differential equations. The continuous liquid mass of the tank is modelled as lumped masses known as convective mass, impulsive mass and rigid mass. The corresponding stiffness associated with these lumped masses has been worked out depending upon the properties of the tank wall and liquid mass. Since the force-deformation behaviour of the bearings is non-linear, as a result, the seismic response is obtained by the Newmark's step-by-step method. The seismic responses of two types of the isolated tanks (i.e. slender and broad) are investigated under several recorded earthquake ground to study the effects of bi-directional interaction. Further, a parametric study is also carried out to study the effects of important system parameters on the effectiveness of seismic isolation for liquid storage tanks. The various important parameters considered are: (i) the period of isolation, (ii) the damping of isolation bearings and (iii) the yield strength level of the bearings. It has been observed that the seismic response of isolated tank is found to be insensitive to interaction effect of the bearing forces. Further, there exists an optimum value of isolation damping for which the base shear in the tank attains the minimum value. Therefore, increasing the bearing damping beyond a certain value may decrease the bearing and sloshing displacements but it may increase the base shear

Energy conservation employing membrane-based technology

International Nuclear Information System (INIS)

Narayanan, C.M.

1993-01-01

Membranes based processes, if properly adapted to industrial processes have good potential with regard to optimisation and economisation of energy consumption. The specific benefits of MBT (membrane based technology) as an energy conservation methodology are highlighted. (author). 6 refs

Using multimedia technology to help combat the negative effects of protective isolation on patients: the Open Window project--an engineering challenge.

LENUS (Irish Health Repository)

Hegarty, F

2012-02-01

The Open Window project was established with the aim of creating a "virtual window" for each patient who is confined to protective isolation due to treatment for illness. This virtual window as developed provides a range of media or experiences. This paper describes the approach taken to the system design and discusses initial experiences with implementing such a system in a critical care setting. The system design was predicated on two guiding principles. Firstly it should be intuitive to use and the technology used to create the virtual window hidden from patient view. Secondly the system must be able to be installed at the point of care in a way that delivers the experience under the patient\\'s control, without compromising the function or safety of the clinical environment. Patient acceptance of the system is being measured as part of an on-going trial and at this interim phase of data analysis 100% (n=55) of participants in the intervention group have reported that the technology was easy to use. We conclude that the system as designed and installed is an effective, robust and reliable system upon which to base a multimedia interventions in a critical care room.

Developing fossil fuel based technologies

International Nuclear Information System (INIS)

Manzoori, A.R.; Lindner, E.R.

1991-01-01

Some of the undesirable effects of burning fossil fuels in the conventional power generating systems have resulted in increasing demand for alternative technologies for power generation. This paper describes a number of new technologies and their potential to reduce the level of atmospheric emissions associated with coal based power generation, such as atmospheric and pressurized fluid bed combustion systems and fuel cells. The status of their development is given and their efficiency is compared with that of conventional pc fired power plants. 1 tab., 7 figs

Fault Detection, Isolation, and Accommodation for LTI Systems Based on GIMC Structure

Directory of Open Access Journals (Sweden)

D. U. Campos-Delgado

2008-01-01

Full Text Available In this contribution, an active fault-tolerant scheme that achieves fault detection, isolation, and accommodation is developed for LTI systems. Faults and perturbations are considered as additive signals that modify the state or output equations. The accommodation scheme is based on the generalized internal model control architecture recently proposed for fault-tolerant control. In order to improve the performance after a fault, the compensation is considered in two steps according with a fault detection and isolation algorithm. After a fault scenario is detected, a general fault compensator is activated. Finally, once the fault is isolated, a specific compensator is introduced. In this setup, multiple faults could be treated simultaneously since their effect is additive. Design strategies for a nominal condition and under model uncertainty are presented in the paper. In addition, performance indices are also introduced to evaluate the resulting fault-tolerant scheme for detection, isolation, and accommodation. Hard thresholds are suggested for detection and isolation purposes, meanwhile, adaptive ones are considered under model uncertainty to reduce the conservativeness. A complete simulation evaluation is carried out for a DC motor setup.

Internet-based technologies to improve cancer care coordination: current use and attitudes among cancer patients.

Science.gov (United States)

Girault, Anne; Ferrua, Marie; Lalloué, Benoît; Sicotte, Claude; Fourcade, Aude; Yatim, Fatima; Hébert, Guillaume; Di Palma, Mario; Minvielle, Etienne

2015-03-01

The uses of internet-based technologies (e.g. patient portals, websites and applications) by cancer patients could be strong drive for change in cancer care coordination practices. The goal of this study was to assess the current utilisation of internet-based technologies (IBT) among cancer patients, and their willingness to use them for their health, as well as analyse the influence of socio-demographics on both aspects. A questionnaire-based survey was conducted in June 2013, over seven non-consecutive days within seven outpatient departments of Gustave Roussy, a comprehensive cancer centre (≈160,000 consultations yearly), located just outside Paris. We computed descriptive statistics and performed correlation analysis to investigate patients' usage and attitudes in correspondence with age, gender, socioeconomic status, social isolation, and place of living. We then conducted multinomial logistic regressions using R. The participation level was 85% (n=1371). The median age was 53.4. 71% used a mobile phone everyday and 93% had access to Internet from home. Age and socioeconomic status were negatively associated with the use of IBT (p<0.001). Regarding patients' expected benefits, a wide majority valued its use in health care, and especially, the possibility to enhance communication with providers. 84% of patients reported feeling comfortable with the use of such technologies but age and socioeconomic status had a significant influence. Most patients used IBTs every day. Overall, patients advocated for an extended use of IBT in oncology. Differences in perceived ease of use corresponding to age and socioeconomic status have to be addressed. Copyright © 2014 Elsevier Ltd. All rights reserved.

The interior working mechanism and temperature characteristics of a fluid based micro-vibration isolator

Science.gov (United States)

Wang, Jie; Zhao, Shougen; Wu, Dafang; Jing, Xingjian

2016-01-01

Micro-vibration isolation is a hot topic in spacecraft vibration control, and fluid based vibration isolators alternatively provide a good and reliable solution to this challenging issue. In this paper, a novel fluid based micro-vibration isolator (FBMVI) is investigated. According to its inherent working principle and deformation pattern, the generation mechanisms of the damping and stiffness characteristics are derived, which are nonlinear functions of the environmental temperature. Then a lumped parameter model which is expressed by the physical design parameters (PDPs) is constructed, and the corresponding performance objective indices (POIs) are also obtained by applying the equivalence of mechanical impedance. Based on the finite element analysis of the internal damping component, a single variable method is further adopted to carry out the parametric study, and the influences of each PDP on the POIs are analyzed in details. Finally, experiments are conducted to identify the variation of fluid bulk modulus with the outside environmental temperature, and to validate the performance of the isolator under different temperature environments. The tested results show great consistence compared with the predicted tendencies of the parametric study. The results of this study can provide a very useful insight into and/or an important guidance for the design and application of this type of FBMVIs in engineering practice.

Classification Framework for ICT-Based Learning Technologies for Disabled People

Science.gov (United States)

Hersh, Marion

2017-01-01

The paper presents the first systematic approach to the classification of inclusive information and communication technologies (ICT)-based learning technologies and ICT-based learning technologies for disabled people which covers both assistive and general learning technologies, is valid for all disabled people and considers the full range of…

Applicability of aseismic base isolation design to FBRs and state of its development

International Nuclear Information System (INIS)

Morishita, Masaki

1987-01-01

In the reactor vessels and other main equipment of FBRs, thermal stress and the stress due to earthquake load are the main dominant factors in the structural design. As to thermal stress, it is desirable to make vessels and pipings into the thin walled flexible structures, while in the aspect of aseismatic safety, it is necessary to give the required rigidity to the system. Accordingly, it is the key subject to find out the point of compromise between thermal stress-withstanding design and aseismatic design for the optimization. In the case of FBRs, particularly the rationalization of aseismatic design is necessary, and as one of the promising measures, the application of aseismic base isolation is conceivable. It is to suppress the transmission of earthquake motion to the system by designing the natural period of a structural system longer than the dominant period component of earthquake motion input. The basic concept of aseismatic base isolation design, the examples of its application in foreign countries, its research and development in Japan, the structural features of FBRs and their aseismatic base isolation design, the examples of the examination of its application to FBRs, and the problems of hereafter are described. (Kako, I.)

Women and Computer Based Technologies: A Feminist Perspective.

Science.gov (United States)

Morritt, Hope

The use of computer based technologies by professional women in education is examined through a feminist standpoint theory in this paper. The theory is grounded in eight claims which form the basis of the conceptual framework for the study. The experiences of nine women participants with computer based technologies were categorized using three…

Isolated heart models: cardiovascular system studies and technological advances.

Science.gov (United States)

Olejnickova, Veronika; Novakova, Marie; Provaznik, Ivo

2015-07-01

Isolated heart model is a relevant tool for cardiovascular system studies. It represents a highly reproducible model for studying broad spectrum of biochemical, physiological, morphological, and pharmaceutical parameters, including analysis of intrinsic heart mechanics, metabolism, and coronary vascular response. Results obtained in this model are under no influence of other organ systems, plasma concentration of hormones or ions and influence of autonomic nervous system. The review describes various isolated heart models, the modes of heart perfusion, and advantages and limitations of various experimental setups. It reports the improvements of perfusion setup according to Langendorff introduced by the authors.

WDM PONs based on colorless technology

Science.gov (United States)

Saliou, Fabienne; Simon, Gael; Chanclou, Philippe; Pizzinat, Anna; Lin, Huafeng; Zhou, Enyu; Xu, Zhiguang

2015-12-01

Wavelength Division Multiplexing (WDM) Passive Optical Network (PON) is foreseen to be part of the Next Generation Passive Optical Networks. Business and mobile fronthaul networks already express the need to develop WDM PONs in the access segment. Fixed wavelength transceivers based on Coarse WDM are already available to respond to today's market needs but Dense WDM technologies will be needed and colorless technologies are essential to provide simple and cost-effective WDM PON systems. We propose in this paper to demonstrate the capabilities of a DWDM PON system prototype based on self-seeded RSOAs and designed to transmit CPRI over 60 km of fiber at 2.5 Gbit/s.

Patagonian red wines: selection of Lactobacillus plantarum isolates as potential starter cultures for malolactic fermentation.

Science.gov (United States)

Bravo-Ferrada, Bárbara Mercedes; Hollmann, Axel; Delfederico, Lucrecia; Valdés La Hens, Danay; Caballero, Adriana; Semorile, Liliana

2013-09-01

The aim of this study was to evaluate fifty-three Lactobacillus plantarum isolates obtained from a Patagonian red wine, molecularly identified and typified using RAPD analysis, in order to select starter cultures for malolactic fermentation (MLF). The results obtained suggest a considerable genetic diversity, taking into account that all L. plantarum isolates were obtained from one cellar and one vintage. Based on the capacity to tolerate a concentration of 14 % ethanol in MRS broth for 2 days, eight isolates were selected for the subsequent analysis. The incidence of various wine stress factors (ethanol, acid pH, lysozyme and sulfur dioxide) on isolates growth was studied. Besides, glucosidase and tannase activities were evaluated, and the presence of genes involved in the synthesis of biogenic amines was examined by PCR. A previously characterized indigenous Oenococcus oeni strain was included with comparative purposes. Differences in technologically relevant characteristics were observed among the eight L. plantarum selected isolates, revealing an isolate-dependent behavior. Detectable glucosidase and tannase activities were found in all isolates. The presence of genes encoding histidine and tyrosine descarboxylases and putrescine carbamoyltransferase was not detected. The ability of L. plantarum isolates to grow and consume L-malic acid in simulated laboratory-scale vinifications revealed that two of them could be considered as possible MLF starter cultures for Patagonian red wines. These isolates will be subjected to further analysis, for a final winery technological characterization.

Ultraviolet-visible optical isolators based on CeF3 Faraday rotator

International Nuclear Information System (INIS)

Víllora, Encarnación G.; Shimamura, Kiyoshi; Plaza, Gustavo R.

2015-01-01

The first ultraviolet (UV) and visible optical isolators based on CeF 3 are demonstrated. CeF 3 possesses unique properties as Faraday rotator for the UV-visible wavelength region: a wide transparency range (wavelength of >300 nm) and an outstanding Verdet constant. In contrast, currently used terbium-gallium garnets and magneto-optical glasses possess a low transparency in the visible and a small Verdet constant in the UV, respectively. The optical isolator prototypes consist of a CeF 3 rod, a single ring magnet, and a couple of beam splitters. The ring magnets have been designed to guarantee a homogeneous magnetic field; for it, numerical simulations have been carried out. The two prototypes are very compact and operate in the UV at 355 and in the visible at 405 nm, respectively. The performance of these devices indicates the high potential of CeF 3 as a new UV-visible Faraday rotator, specially for shorter wavelengths where at present there are no optical isolators available

Rural electrification for isolated consumers: Sustainable management model based on residue biomass

International Nuclear Information System (INIS)

Pinheiro, Giorgiana; Rendeiro, Goncalo; Pinho, Joao; Macedo, Emanuel

2011-01-01

This paper presents a case study of the electrification of a riparian community in the State of Para, Brazil, within the scope of the Program for Electric Power Service Universalization in Brazil. The community is located in a remote area; approximately 100 km from the municipal district, there is no regular transport to access the community, and adequate communication service. The community is provided with electrification facilities through a small biomass-based power plant, directly firing residues produced by the local economic activity. The objective of the paper is to propose a sustainable management model that is suitable for community's isolation conditions, considering the high costs with operation and maintenance related to the supply of isolated consumers in small locations. A simulation is conducted for the operation of the small biomass-based power plant, the generation costs are determined, the legal aspects are analyzed, and a suggestion for the management model is presented. - Highlights: → Electrification of isolated consumers is a great challenge for utilities. → Using local labor and resources allows lower energy costs for electrification. → Creation of a specific legislation for utilities is required. → Should also be implemented social activities together with electrification.

Evaluation of applicability of lead damper to 3-dimensional isolation system based on loading tests

International Nuclear Information System (INIS)

Matsuda, Akihiro

2003-01-01

To develop a damper for 3-dimensional base isolation system, horizontal and vertical mechanical properties, effect of loading frequency on vertical mechanical properties, coupled properties between horizontal and vertical directions, stability performance due to cyclic deformation are evaluated experimentally using scale models of lead damper originally developed for horizontal base isolation system. Loading test results are summarized as follows; 1) The lead damper has good vertical damping performance, in that the vertical yield load of the lead damper is three times as large as that for the horizontal direction, and the lead damper shows plastic behavior in the small deformation region. 2) The lead damper shows enough stability for static vertical displacement of ±40 mm. 3) the lead damper shows high stability performance for dynamic cyclic loading test using motions of isolation layer calculated by earthquake response analysis of FBR building subjected to S2-earthquake motion. Thus, applicability of the lead damper to 3-dimensional isolation system is shown from these results. (author)

Model-based fault detection and isolation of a PWR nuclear power plant using neural networks

International Nuclear Information System (INIS)

Far, R.R.; Davilu, H.; Lucas, C.

2008-01-01

The proper and timely fault detection and isolation of industrial plant is of premier importance to guarantee the safe and reliable operation of industrial plants. The paper presents application of a neural networks-based scheme for fault detection and isolation, for the pressurizer of a PWR nuclear power plant. The scheme is constituted by 2 components: residual generation and fault isolation. The first component generates residuals via the discrepancy between measurements coming from the plant and a nominal model. The neutral network estimator is trained with healthy data collected from a full-scale simulator. For the second component detection thresholds are used to encode the residuals as bipolar vectors which represent fault patterns. These patterns are stored in an associative memory based on a recurrent neutral network. The proposed fault diagnosis tool is evaluated on-line via a full-scale simulator detected and isolate the main faults appearing in the pressurizer of a PWR. (orig.)

Information and Communication Technology and School Based ...

African Journals Online (AJOL)

Information and Communication technology and school based assessment (SBA) is practice that broadens the form mode, means and scope of assessment in the school using modern technologies in order to facilitate and enhance learning. This study sought to ascertain the efficacy of Information and Communication ...

Active vibration isolation platform on base of magnetorheological elastomers

Energy Technology Data Exchange (ETDEWEB)

Mikhailov, Valery P., E-mail: mikhailov@bmstu.ru; Bazinenkov, Alexey M.

2017-06-01

The article describes the active vibration isolation platform on base of magnetorheological (MR) elastomers. An active damper based on the MR elastomers can be used as an actuator of micro- or nanopositioning for a vibroinsulated object. The MR elastomers give such advantages for active control of vibration as large range of displacements (up to 1 mm), more efficient absorption of the vibration energy, possibility of active control of amplitude-frequency characteristics and positioning with millisecond response speed and nanometer running accuracy. The article presents the results of experimental studies of the most important active damper parameters. Those are starting current, transient time for stepping, transmission coefficient of the vibration displacement amplitude.

Disaster management: using Internet-based technology.

Science.gov (United States)

Dimitruk, Paul

2007-01-01

Disasters impose operational challenges and substantial financial burdens on hospitals. Internet-based disaster management technology can help. This technology should: Capture, analyze, and track relevant data. Be available 24/7. Guide decision makers in setting up an incident command center and monitor the completion of jobs by ICC role. Provide assistance in areas that hospitals are not used to dealing with, e.g., chemical or bio-terror agents.

Experiment-Based Sensitivity Analysis of Scaled Carbon-Fiber-Reinforced Elastomeric Isolators in Bonded Applications

Directory of Open Access Journals (Sweden)

Farshad Hedayati Dezfuli

2016-01-01

Full Text Available Fiber-reinforced elastomeric isolators (FREIs are a new type of elastomeric base isolation systems. Producing FREIs in the form of long laminated pads and cutting them to the required size significantly reduces the time and cost of the manufacturing process. Due to the lack of adequate information on the performance of FREIs in bonded applications, the goal of this study is to assess the performance sensitivity of 1/4-scale carbon-FREIs based on the experimental tests. The scaled carbon-FREIs are manufactured using a fast cold-vulcanization process. The effect of several factors including the vertical pressure, the lateral cyclic rate, the number of rubber layers, and the thickness of carbon fiber-reinforced layers are explored on the cyclic behavior of rubber bearings. Results show that the effect of vertical pressure on the lateral response of base isolators is negligible. However, decreasing the cyclic loading rate increases the lateral flexibility and the damping capacity. Additionally, carbon fiber-reinforced layers can be considered as a minor source of energy dissipation.

Striction-based Power Monitoring in Space Environment, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The program delivers a completely new technology solution to isolation and sensing of power flow (current and voltage). Based on striction materials technology,...

Investigation under international cooperation on the mentality/intellect-based technology. Development of mind-based technology; Shinsei chisei kiban gijutsu kokusai kyodo kenkyu chosa. Mind-Based Technology no kaihatsu ni kakawaru kenkyu chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

The mind-based technology (MBT) was investigated to be developed, for materializing the world where the human race and machinery live together without sense of incompatibility. Based on the human mind, the MBT is a technology to support the personal expression which respects the value judgment, diversity and individuality in the human life. For it, it is important to technologically comprehend the human mind and physiological/psychological state, and particularly, control the human will. In order to structure the social system in which the human race and technology live together, it is also important to build a life system information processing model which simulates the formation process to integrate the feeling, knowledge and conscience, together with an action system to be established. As an image to which the MBT is applied, support will be extended to the life fulfillment, personal expression and hearty communication. Development is expected toward the social security technology with robots living in the human society. Pursuing the mental richness and worthwhile life, the high-grade mature society needs the technology to communicate with the machinery gentle to the human race on the mutual interface. 21 refs., 8 figs.

Teaching Information Systems Technologies: a New Approach based on Virtualization and Hosting Technologies

Directory of Open Access Journals (Sweden)

Carmelo R. García

2012-11-01

Full Text Available This paper describes how to provide suitable computing systems for information systems technologies learning using virtualization and hosting technologies. The main functionalities and components of an university learning lab based on these technologies are presented. All the software components used in its development are open source. Also, the use of this lab, providing the computing systems required for the learning activities of different matters related to the information systems technologies, is illustrated. The model of computing lab proposed is a more sustainable and scalable alternative than the traditional academic computing lab.

School-based data and management of technological innovations in ...

African Journals Online (AJOL)

School-based data and management of technological innovations in public secondary schools in Cross River State. ... Global Journal of Educational Research ... Result indicated that: there is no significant positive relationship between school-based data and principals management of technological innovation.

Genotyping of Single Nucleotide Polymorphisms in DNA Isolated from Serum Using Sequenom MassARRAY Technology.

Directory of Open Access Journals (Sweden)

Tess V Clendenen

Full Text Available Large epidemiologic studies have the potential to make valuable contributions to the assessment of gene-environment interactions because they prospectively collected detailed exposure data. Some of these studies, however, have only serum or plasma samples as a low quantity source of DNA.We examined whether DNA isolated from serum can be used to reliably and accurately genotype single nucleotide polymorphisms (SNPs using Sequenom multiplex SNP genotyping technology. We genotyped 81 SNPs using samples from 158 participants in the NYU Women's Health Study. Each participant had DNA from serum and at least one paired DNA sample isolated from a high quality source of DNA, i.e. clots and/or cell precipitates, for comparison.We observed that 60 of the 81 SNPs (74% had high call frequencies (≥95% using DNA from serum, only slightly lower than the 85% of SNPs with high call frequencies in DNA from clots or cell precipitates. Of the 57 SNPs with high call frequencies for serum, clot, and cell precipitate DNA, 54 (95% had highly concordant (>98% genotype calls across all three sample types. High purity was not a critical factor to successful genotyping.Our results suggest that this multiplex SNP genotyping method can be used reliably on DNA from serum in large-scale epidemiologic studies.

A novel fiber-based adsorbent technology

Energy Technology Data Exchange (ETDEWEB)

Reynolds, T.A. [Chemica Technologies, Inc., Bend, OR (United States)

1997-10-01

In this Phase I Small Business Innovation Research program, Chemica Technologies, Inc. is developing an economical, robust, fiber-based adsorbent technology for removal of heavy metals from contaminated water. The key innovation is the development of regenerable adsorbent fibers and adsorbent fiber cloths that have high capacity and selectivity for heavy metals and are chemically robust. The process has the potential for widespread use at DOE facilities, mining operations, and the chemical process industry.

Experimental platform utilising melting curve technology for detection of mutations in Mycobacterium tuberculosis isolates.

Science.gov (United States)

Broda, Agnieszka; Nikolayevskyy, Vlad; Casali, Nicki; Khan, Huma; Bowker, Richard; Blackwell, Gemma; Patel, Bhakti; Hume, James; Hussain, Waqar; Drobniewski, Francis

2018-04-20

Tuberculosis (TB) remains one of the most deadly infections with approximately a quarter of cases not being identified and/or treated mainly due to a lack of resources. Rapid detection of TB or drug-resistant TB enables timely adequate treatment and is a cornerstone of effective TB management. We evaluated the analytical performance of a single-tube assay for multidrug-resistant TB (MDR-TB) on an experimental platform utilising RT-PCR and melting curve analysis that could potentially be operated as a point-of-care (PoC) test in resource-constrained settings with a high burden of TB. Firstly, we developed and evaluated the prototype MDR-TB assay using specimens extracted from well-characterised TB isolates with a variety of distinct rifampicin and isoniazid resistance conferring mutations and nontuberculous Mycobacteria (NTM) strains. Secondly, we validated the experimental platform using 98 clinical sputum samples from pulmonary TB patients collected in high MDR-TB settings. The sensitivity of the platform for TB detection in clinical specimens was 75% for smear-negative and 92.6% for smear-positive sputum samples. The sensitivity of detection for rifampicin and isoniazid resistance was 88.9 and 96.0% and specificity was 87.5 and 100%, respectively. Observed limitations in sensitivity and specificity could be resolved by adjusting the sample preparation methodology and melting curve recognition algorithm. Overall technology could be considered a promising PoC methodology especially in resource-constrained settings based on its combined accuracy, convenience, simplicity, speed, and cost characteristics.

Microplate-based high throughput screening procedure for the isolation of lipid-rich marine microalgae

Directory of Open Access Journals (Sweden)

Pereira Hugo

2011-12-01

Full Text Available Abstract We describe a new selection method based on BODIPY (4,4-difluoro-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene staining, fluorescence activated cell sorting (FACS and microplate-based isolation of lipid-rich microalgae from an environmental sample. Our results show that direct sorting onto solid medium upon FACS can save about 3 weeks during the scale-up process as compared with the growth of the same cultures in liquid medium. This approach enabled us to isolate a biodiverse collection of several axenic and unialgal cultures of different phyla.

Permanent isolation surface barrier development plan

International Nuclear Information System (INIS)

Wing, N.R.

1994-01-01

The exhumation and treatment of wastes may not always be the preferred alternative in the remediation of a waste site. In-place disposal alternatives, under certain circumstances, may be the most desirable alternatives to use in the protection of human health and the environment. The implementation of an in-place disposal alternative will likely require some type of protective covering that will provide long-term isolation of the wastes from the accessible environment. Even if the wastes are exhumed and treated, a long-term barrier may still be needed to adequately dispose of the treated wastes or any remaining waste residuals. Currently, no open-quotes provenclose quotes long-term barrier is available. The Hanford Site Permanent Isolation Surface Barrier Development Program (BDP) was organized to develop the technology needed to provide a long-term surface barrier capability for the Hanford Site. The permanent isolation barrier technology also could be used at other sites. Permanent isolation barriers use engineered layers of natural materials to create an integrated structure with redundant protective features. Drawings of conceptual permanent isolation surface barriers are shown. The natural construction materials (e.g., fine soil, sand, gravel, riprap, asphalt) have been selected to optimize barrier performance and longevity. The objective of current designs is to use natural materials to develop a maintenance-free permanent isolation surface barrier that isolates wastes for a minimum of 1,000 years by limiting water drainage to near-zero amounts; reducing the likelihood of plant, animal, and human intrusion; controlling the exhalation of noxious gases; and minimizing erosion-related problems

Permanent isolation surface barrier development plan

Energy Technology Data Exchange (ETDEWEB)

Wing, N.R.

1994-01-01

The exhumation and treatment of wastes may not always be the preferred alternative in the remediation of a waste site. In-place disposal alternatives, under certain circumstances, may be the most desirable alternatives to use in the protection of human health and the environment. The implementation of an in-place disposal alternative will likely require some type of protective covering that will provide long-term isolation of the wastes from the accessible environment. Even if the wastes are exhumed and treated, a long-term barrier may still be needed to adequately dispose of the treated wastes or any remaining waste residuals. Currently, no {open_quotes}proven{close_quotes} long-term barrier is available. The Hanford Site Permanent Isolation Surface Barrier Development Program (BDP) was organized to develop the technology needed to provide a long-term surface barrier capability for the Hanford Site. The permanent isolation barrier technology also could be used at other sites. Permanent isolation barriers use engineered layers of natural materials to create an integrated structure with redundant protective features. Drawings of conceptual permanent isolation surface barriers are shown. The natural construction materials (e.g., fine soil, sand, gravel, riprap, asphalt) have been selected to optimize barrier performance and longevity. The objective of current designs is to use natural materials to develop a maintenance-free permanent isolation surface barrier that isolates wastes for a minimum of 1,000 years by limiting water drainage to near-zero amounts; reducing the likelihood of plant, animal, and human intrusion; controlling the exhalation of noxious gases; and minimizing erosion-related problems.

Threshold evaluations of industrial conservation technologies run in ISTUM base case

Energy Technology Data Exchange (ETDEWEB)

1978-12-20

The results of threshold evaluations performed on several INDUS technologies which were competed with other new and conventional industrial technologies in the Industrial Sector Technology Use Model (ISTUM) developed by EEA are summarized. The ISTUM model is briefly described and includes the input technology categories and service sectors treated in the model, and the solution technique used. The input data specifications are summaried for the Industry Conservation Technologies run in the ISTUM base case. Included are listings of the technologies run in ISTUM, those not run in ISTUM, and a discussion of the absence of a retrofit algorithm in ISTUM and its resulting impact on conservation technologies. Also included is a discussion of the capital cost variability, maximum market fraction, size and load factors and data quality specifications for the conservation technologies in ISTUM. The results of the ISTUM base case run are presented, describing the important limitations and constraints of the base case run, the key assumptions inherent in the base case, and the summarized results of energy savings by year for different generic technology types. The technology characterization data developed for each INDUS technology run in the ISTUM base case are discussed in detail. The descriptions include the calculations and assumptions used in determining the service demand displacement, equipment cost, maximum market fraction, data quality, and size and load range for each technology.

A dynamic approach to technology transfer

International Nuclear Information System (INIS)

Shave, D.F.; Kent, G.F.; Giambusso, A.; Jacobs, S.B.

1987-01-01

Stone and Webster Engineering Corporation has developed a systematic program for achieving efficient, effective technology transfer. This program is based on transferring both know-why and know-how. The transfer of know-why and know-how is achieved most effectively by working in partnership with the recipient of the technology; by employing five primary transfer mechanisms, according to the type of learning required; by treating the technology transfer as a designed process rather than an isolated event; and by using a project management approach to control and direct the process. This paper describes the philosophy, process, and training mechanisms that have worked for Stone and Webster, as well as the project management approach needed for the most effective transfer of technology. (author)

ICT based training on nuclear technology applications in Tanzania

Energy Technology Data Exchange (ETDEWEB)

Mdoe, S.L. [Nuclear Technology Applications Directorate, Tanzania Atomic Energy Commission, P.O. Box 743, Arusha (Tanzania)]. E-mail: slcmdoe@yahoo.com; Kimaro, E. [Nuclear Technology Applications Directorate, Tanzania Atomic Energy Commission, P.O. Box 743, Arusha (Tanzania)]. E-mail: taec@habari.co.tz

2006-07-01

Peaceful application of nuclear technology has contributed to socio-economic resource development in Tanzania. The Tanzania Atomic Energy Commission has taken some active steps for the incorporation and or adoption of ICT-based training modules in nuclear science and technology and its applications. The overall objective of this programme is to establish a sustainable national capability for using the potential of information communication technologies (ICTs) for training and education in the field of nuclear science and technology. This paper reviews some of the experience which the authors gained in the area of ICT based training in nuclear technology applications, it describes some of the challenges experienced, and some proposals to address the issues involved. (author)

ICT based training on nuclear technology applications in Tanzania

International Nuclear Information System (INIS)

Mdoe, S.L.; Kimaro, E.

2006-01-01

Peaceful application of nuclear technology has contributed to socio-economic resource development in Tanzania. The Tanzania Atomic Energy Commission has taken some active steps for the incorporation and or adoption of ICT-based training modules in nuclear science and technology and its applications. The overall objective of this programme is to establish a sustainable national capability for using the potential of information communication technologies (ICTs) for training and education in the field of nuclear science and technology. This paper reviews some of the experience which the authors gained in the area of ICT based training in nuclear technology applications, it describes some of the challenges experienced, and some proposals to address the issues involved. (author)

Hanford Permanent Isolation Barrier Program: Asphalt technology test plan

Energy Technology Data Exchange (ETDEWEB)

Freeman, H.D.; Romine, R.A.

1994-05-01

The Hanford Permanent Isolation Barriers use engineered layers of natural materials to create an integrated structure with backup protective features. The objective of current designs is to develop a maintenance-free permanent barrier that isolates wastes for a minimum of 1000 years by limiting water drainage to near-zero amounts. Asphalt is being used as an impermeable water diversion layer to provide a redundant layer within the overall barrier design. Data on asphalt barrier properties in a buried environment are not available for the required 100-year time frame. The purpose of this test plan is to outline the activities planned to obtain data with which to estimate performance of the asphalt layers.

Hanford Permanent Isolation Barrier Program: Asphalt technology test plan

International Nuclear Information System (INIS)

Freeman, H.D.; Romine, R.A.

1994-05-01

The Hanford Permanent Isolation Barriers use engineered layers of natural materials to create an integrated structure with backup protective features. The objective of current designs is to develop a maintenance-free permanent barrier that isolates wastes for a minimum of 1000 years by limiting water drainage to near-zero amounts. Asphalt is being used as an impermeable water diversion layer to provide a redundant layer within the overall barrier design. Data on asphalt barrier properties in a buried environment are not available for the required 100-year time frame. The purpose of this test plan is to outline the activities planned to obtain data with which to estimate performance of the asphalt layers

Multiple criteria-based screening of Trichoderma isolates for biological control of Botrytis cinerea on tomato

Science.gov (United States)

Seventy-two isolates of Trichoderma were obtained from Hubei Province of China and identified to species based on the ITS-rDNA sequences. The isolates were initially tested for invasive growth on the colonies of Botrytis cinerea in the dual cultures with B. cinerea on potato dextrose agar at 20°C. T...

Palliative home-based technology from a practitioner's perspective: benefits and disadvantages

Directory of Open Access Journals (Sweden)

Johnston BM

2014-11-01

Full Text Available Bridget M Johnston Sue Ryder Care Centre for the Study of Supportive, Palliative, and End of Life Care, School of Health Sciences, University of Nottingham, Queen's Medical Centre, Nottingham, UK Abstract: This critical review paper explores the concept of palliative home-based technology from a practitioner's perspective. The aim of the critical review was to scope information available from published and unpublished research on the current state of palliative home-based technology, practitioner-focused perspectives, patient-focused perspectives, quality of life, and the implications for clinical practice. Published and unpublished studies were included. An example of one UK patient-centered home-based technology is explored as an exemplar. The evidence suggests that despite the challenges, there are numerous examples of good practice in relation to palliative home-based technology. Improvements in technology mean that telehealth has much to offer people being cared for at home with palliative needs. However, some of the evaluative evidence is limited, and further rigor is needed when evaluating future technology-based solutions innovations. Keywords: technology, telehealth, telemedicine, information technology, palliative care, hospice, terminal illness

Centrosome isolation and analysis by mass spectrometry-based proteomics

DEFF Research Database (Denmark)

Jakobsen, Lis; Schrøder, Jacob Morville; Larsen, Katja M

2013-01-01

Centrioles are microtubule-based scaffolds that are essential for the formation of centrosomes, cilia, and flagella with important functions throughout the cell cycle, in physiology and during development. The ability to purify centriole-containing organelles on a large scale, combined with advan...... to isolate centrosomes from human cells and strategies to selectively identify and study the properties of the associated proteins using quantitative mass spectrometry-based proteomics.......Centrioles are microtubule-based scaffolds that are essential for the formation of centrosomes, cilia, and flagella with important functions throughout the cell cycle, in physiology and during development. The ability to purify centriole-containing organelles on a large scale, combined...... with advances in protein identification using mass spectrometry-based proteomics, have revealed multiple centriole-associated proteins that are conserved during evolution in eukaryotes. Despite these advances, the molecular basis for the plethora of processes coordinated by cilia and centrosomes is not fully...

Monoclonal antibodies based on hybridoma technology.

Science.gov (United States)

Yagami, Hisanori; Kato, Hiroshi; Tsumoto, Kanta; Tomita, Masahiro

2013-03-01

Based on the size and scope of the present global market for medicine, monoclonal antibodies (mAbs) have a very promising future, with applications for cancers through autoimmune ailments to infectious disease. Since mAbs recognize only their target antigens and not other unrelated proteins, pinpoint medical treatment is possible. Global demand is dramatically expanding. Hybridoma technology, which allows production of mAbs directed against antigens of interest is therefore privileged. However, there are some pivotal points for further development to generate therapeutic antibodies. One is selective generation of human mAbs. Employment of transgenic mice producing human antibodies would overcome this problem. Another focus is recognition sites and conformational epitopes in antigens may be just as important as linear epitopes, especially when membrane proteins such as receptors are targeted. Recognition of intact structures is of critical importance for medical purposes. In this review, we describe patent related information for therapeutic mAbs based on hybridoma technology and also discuss new advances in hybridoma technology that facilitate selective production of stereospecific mAbs.

Mobile-Based Dictionary of Information and Communication Technology

Science.gov (United States)

Liando, O. E. S.; Mewengkang, A.; Kaseger, D.; Sangkop, F. I.; Rantung, V. P.; Rorimpandey, G. C.

2018-02-01

This study aims to design and build mobile-based dictionary of information and communication technology applications to provide access to information in the form of glossary of terms in the context of information and communication technologies. Applications built in this study using the Android platform, with SQLite database model. This research uses prototype model development method which covers the stages of communication, Quick Plan, Quick Design Modeling, Construction of Prototype, Deployment Delivery & Feedback, and Full System Transformation. The design of this application is designed in such a way as to facilitate the user in the process of learning and understanding the new terms or vocabularies encountered in the world of information and communication technology. Mobile-based dictionary of Information And Communication Technology applications that have been built can be an alternative to learning literature. In its simplest form, this application is able to meet the need for a comprehensive and accurate dictionary of Information And Communication Technology function.

Navigation studies based on the ubiquitous positioning technologies

Science.gov (United States)

Ye, Lei; Mi, Weijie; Wang, Defeng

2007-11-01

This paper summarized the nowadays positioning technologies, such as absolute positioning methods and relative positioning methods, indoor positioning and outdoor positioning, active positioning and passive positioning. Global Navigation Satellite System (GNSS) technologies were introduced as the omnipresent out-door positioning technologies, including GPS, GLONASS, Galileo and BD-1/2. After analysis of the shortcomings of GNSS, indoor positioning technologies were discussed and compared, including A-GPS, Cellular network, Infrared, Electromagnetism, Computer Vision Cognition, Embedded Pressure Sensor, Ultrasonic, RFID (Radio Frequency IDentification), Bluetooth, WLAN etc.. Then the concept and characteristics of Ubiquitous Positioning was proposed. After the ubiquitous positioning technologies contrast and selection followed by system engineering methodology, a navigation system model based on Incorporate Indoor-Outdoor Positioning Solution was proposed. And this model was simulated in the Galileo Demonstration for World Expo Shanghai project. In the conclusion, the prospects of ubiquitous positioning based navigation were shown, especially to satisfy the public location information acquiring requirement.

Impact of Gender on Patient Preferences for Technology-Based Behavioral Interventions

Directory of Open Access Journals (Sweden)

David J. Kim

2014-08-01

Full Text Available Introduction: Technology-based interventions offer an opportunity to address high-risk behaviors in the emergency department (ED. Prior studies suggest behavioral health strategies are more effective when gender differences are considered. However, the role of gender in ED patient preferences for technology-based interventions has not been examined. The objective was to assess whether patient preferences for technology-based interventions varies by gender. Methods: This was a secondary analysis of data from a systematic survey of adult (18 years of age, English-speaking patients in a large urban academic ED. Subjects were randomly selected during a purposive sample of shifts. The iPad survey included questions on access to technology, preferences for receiving health information, and demographics. We defined ‘‘technology-based’’ as web, text message, e-mail, social networking, or DVD; ‘‘non-technology-based’’ was defined as in-person, written materials, or landline. We calculated descriptive statistics and used univariate tests to compare men and women. Gender-stratified multivariable logistic regression models were used to examine associations between other demographic factors (age, race, ethnicity, income and technology-based preferences for information on specific risky behaviors. Results: Of 417 participants, 45.1% were male. There were no significant demographic differences between men and women. Women were more likely to use computers (90.8% versus 81.9%; p¼0.03, Internet (66.8% versus 59.0%; p¼0.03, and social networks (53.3% versus 42.6%; p¼0.01. 89% of men and 90% of women preferred technology-based formats for at least type of health information; interest in technology-based for individual health topics did not vary by gender. Concern about confidentiality was the most common barrier to technology-based use for both genders. Multivariate analysis showed that for smoking, depression, drug/alcohol use, and injury

Buildings for advanced technology

CERN Document Server

Teague, E; Murday, James

2015-01-01

This book deals with the design and construction of buildings for nanoscale science and engineering research. The information provided in this book is useful for designing and constructing buildings for such advanced technologies as nanotechnology, nanoelectronics and biotechnology. The book outlines the technology challenges unique to each of the building environmental challenges outlined below and provides best practices and examples of engineering approaches to address them: • Establishing and maintaining critical environments: temperature, humidity, and pressure • Structural vibration isolation • Airborne vibration isolation (acoustic noise) • Isolation of mechanical equipment-generated vibration/acoustic noise • Cost-effective power conditioning • Grounding facilities for low electrical interference • Electromagnetic interference (EMI)/Radio frequency interference (RFI) isolation • Airborne particulate contamination • Airborne organic and chemical contamination • Environment, safety a...

Technology-based Mergers and Acquisitions

DEFF Research Database (Denmark)

Wang, Daojuan; Moini, Hamid

2014-01-01

The purpose of this chapter is to provide an updated review of what is known about the performance of technology-based mergers and acquisitions (TBM&As) and their determinants. This review brings together papers published from 1990 to 2012 in top-rated academic journals within nearly all fields...

Robust Mpc for Actuator–Fault Tolerance Using Set–Based Passive Fault Detection and Active Fault Isolation

Directory of Open Access Journals (Sweden)

Xu Feng

2017-03-01

Full Text Available In this paper, a fault-tolerant control (FTC scheme is proposed for actuator faults, which is built upon tube-based model predictive control (MPC as well as set-based fault detection and isolation (FDI. In the class of MPC techniques, tubebased MPC can effectively deal with system constraints and uncertainties with relatively low computational complexity compared with other robust MPC techniques such as min-max MPC. Set-based FDI, generally considering the worst case of uncertainties, can robustly detect and isolate actuator faults. In the proposed FTC scheme, fault detection (FD is passive by using invariant sets, while fault isolation (FI is active by means of MPC and tubes. The active FI method proposed in this paper is implemented by making use of the constraint-handling ability of MPC to manipulate the bounds of inputs.

A MEMS lamination technology based on sequential multilayer electrodeposition

International Nuclear Information System (INIS)

Kim, Minsoo; Kim, Jooncheol; Herrault, Florian; Schafer, Richard; Allen, Mark G

2013-01-01

A MEMS lamination technology based on sequential multilayer electrodeposition is presented. The process comprises three main steps: (1) automated sequential electrodeposition of permalloy (Ni 80 Fe 20 ) structural and copper sacrificial layers to form multilayer structures of significant total thickness; (2) fabrication of polymeric anchor structures through the thickness of the multilayer structures and (3) selective removal of copper. The resulting structure is a set of air-insulated permalloy laminations, the separation of which is sustained by insulating polymeric anchor structures. Individual laminations have precisely controllable thicknesses ranging from 500 nm to 5 µm, and each lamination layer is electrically isolated from adjacent layers by narrow air gaps of similar scale. In addition to air, interlamination insulators based on polymers are investigated. Interlamination air gaps with very high aspect ratio (>1:100) can be filled with polyvinylalcohol and polydimethylsiloxane. The laminated structures are characterized using scanning electron microscopy and atomic force microscopy to directly examine properties such as the roughness and the thickness uniformity of the layers. In addition, the quality of the electrical insulation between the laminations is evaluated by quantifying the eddy current within the sample as a function of frequency. Fabricated laminations are comprised of uniform, smooth (surface roughness <100 nm) layers with effective electrical insulation for all layer thicknesses and insulator approaches studied. Such highly laminated structures have potential uses ranging from energy conversion to applications where composite materials with highly anisotropic mechanical or thermal properties are required. (paper)

Technology overview of mined repositories

International Nuclear Information System (INIS)

Gimera, R.; Thirumalai, K.

1982-01-01

Mined repositories present an environmentally viable option for permanent disposal of nuclear waste. This paper reviews the state-of-the-art mining technologies and identifies technological issues and developments necessary to mine a repository in basalt. The thermal loading, isolation, and retrieval requirements of a repository present unique technological challenges unknown to conventional mining practice. The technology issues and developments required in the areas of excavation, roof and ground support, equipment development, instrumentation development, and sealing are presented. Performance assessment methods must be developed to evaluate the adequacies of technologies developed to design, construct, operate, and decommission a repository. A stepwise test-and-development approach is used in the Basalt Waste Isolation Project to develop cost-effective technologies for a repository

Total-ionizing-dose effects on isolation oxides in modern CMOS technologies

International Nuclear Information System (INIS)

Barnaby, Hugh J.; Mclain, Michael; Esqueda, Ivan Sanchez

2007-01-01

This paper presents experimental data on the total dose response of deep sub-micron bulk CMOS devices and integrated circuits. Ionizing radiation experiments on shallow trench isolation (STI) field oxide MOS capacitors (FOXCAP) indicate a characteristic build-up of radiation-induced defects in the dielectric. In this paper, capacitors fabricated with STI, thermal, SIMOX and bipolar base oxides of similar thickness are compared and show the STI oxide to be most susceptible to radiation effects. Experimental data on irradiated shift registers and n-channel MOSFETs are also presented. These data indicate that radiation damage to the STI can increase the off-state current of n-channel devices and the standby current of CMOS integrated circuits

Development and characterization of a multi-layer magnetorheological elastomer isolator based on a Halbach array

Science.gov (United States)

Przybylski, Michal; Sun, Shuaishuai; Li, Weihua

2016-10-01

Most existing vibration isolators and dampers based on magnetorheological (MR) materials need electrical power to feed magnetic coils to stimulate the MR material, so if there is a loss of power, such as during a strong earthquake or system failure, they are unable to protect the structure. This paper outlines the design and test of a controllable multilayered magnetorheological elastomer (MRE) isolator based on a circular dipolar Halbach array; which is a set of magnets that generates a strong and uniform magnetic field. Combining an MRE layered isolator system with the Halbach array allows for constant vibration isolation with very low power consumption, where the power generated is only used to adjust the Halbach position. When this system was tested it successfully altered the lateral stiffness and damping force by 81.13% and 148.72%, respectively. This paper also includes an extended analysis of the magnetic field generated by the circular dipolar Halbach array and a discussion of the improvements that may potentially improve the range of magnetic fields generated.

Technology-Enhanced Formative Assessment: A Research-Based Pedagogy for Teaching Science with Classroom Response Technology

Science.gov (United States)

Beatty, Ian D.; Gerace, William J.

2009-01-01

"Classroom response systems" (CRSs) are a promising instructional technology, but most literature on CRS use fails to distinguish between technology and pedagogy, to define and justify a pedagogical perspective, or to discriminate between pedagogies. "Technology-enhanced formative assessment" (TEFA) is our pedagogy for CRS-based science…

Development of a Novel Self-Enclosed Sample Preparation Device for DNA/RNA Isolation in Space

Science.gov (United States)

Zhang, Ye; Mehta, Satish K.; Pensinger, Stuart J.; Pickering, Karen D.

2011-01-01

Modern biology techniques present potentials for a wide range of molecular, cellular, and biochemistry applications in space, including detection of infectious pathogens and environmental contaminations, monitoring of drug-resistant microbial and dangerous mutations, identification of new phenotypes of microbial and new life species. However, one of the major technological blockades in enabling these technologies in space is a lack of devices for sample preparation in the space environment. To overcome such an obstacle, we constructed a prototype of a DNA/RNA isolation device based on our novel designs documented in the NASA New Technology Reporting System (MSC-24811-1/3-1). This device is self-enclosed and pipette free, purposely designed for use in the absence of gravity. Our design can also be modified easily for preparing samples in space for other applications, such as flowcytometry, immunostaining, cell separation, sample purification and separation according to its size and charges, sample chemical labeling, and sample purification. The prototype of our DNA/RNA isolation device was tested for efficiencies of DNA and RNA isolation from various cell types for PCR analysis. The purity and integrity of purified DNA and RNA were determined as well. Results showed that our developed DNA/RNA isolation device offers similar efficiency and quality in comparison to the samples prepared using the standard protocol in the laboratory.

Technology-based suicide prevention: current applications and future directions.

Science.gov (United States)

Luxton, David D; June, Jennifer D; Kinn, Julie T

2011-01-01

This review reports on current and emerging technologies for suicide prevention. Technology-based programs discussed include interactive educational and social networking Web sites, e-mail outreach, and programs that use mobile devices and texting. We describe innovative applications such as virtual worlds, gaming, and text analysis that are currently being developed and applied to suicide prevention and outreach programs. We also discuss the benefits and limitations of technology-based applications and discuss future directions for their use.

Earthquake Protection of Existing Structures with Limited Seismic Joint: Base Isolation with Supplemental Damping versus Rotational Inertia

Directory of Open Access Journals (Sweden)

Dario De Domenico

2018-01-01

Full Text Available Existing civil engineering structures having strategic importance, such as hospitals, fire stations, and power plants, often do not comply with seismic standards in force today, as they were designed and built based on past structural guidelines. On the other hand, due to their special importance, structural integrity of such buildings is of vital importance during and after earthquakes, which puts demands on strategies for their seismic protection. In this regard, seismic base isolation has been widely employed; however, the existing limited seismic joint between adjacent buildings may hamper this application because of the large displacements concentrated at the isolation floor. In this paper, we compare two possible remedies: the former is to provide supplemental damping in conventional base isolation systems and the latter consists in a combination of base isolation with supplemental rotational inertia. For the second strategy, a mechanical device, called inerter, is arranged in series with spring and dashpot elements to form the so-called tuned-mass-damper-inerter (TMDI directly connected to an isolation floor. Several advantages of this second system as compared to the first one are outlined, especially with regard to the limitation of floor accelerations and interstory drifts, which may be an issue for nonstructural elements and equipment, in addition to disturbing occupants. Once the optimal design of the TMDI is established, possible implementation of this system into existing structures is discussed.

Data-Base Software For Tracking Technological Developments

Science.gov (United States)

Aliberti, James A.; Wright, Simon; Monteith, Steve K.

1996-01-01

Technology Tracking System (TechTracS) computer program developed for use in storing and retrieving information on technology and related patent information developed under auspices of NASA Headquarters and NASA's field centers. Contents of data base include multiple scanned still images and quick-time movies as well as text. TechTracS includes word-processing, report-editing, chart-and-graph-editing, and search-editing subprograms. Extensive keyword searching capabilities enable rapid location of technologies, innovators, and companies. System performs routine functions automatically and serves multiple users.

A technology path to tactical agent-based modeling

Science.gov (United States)

James, Alex; Hanratty, Timothy P.

2017-05-01

Wargaming is a process of thinking through and visualizing events that could occur during a possible course of action. Over the past 200 years, wargaming has matured into a set of formalized processes. One area of growing interest is the application of agent-based modeling. Agent-based modeling and its additional supporting technologies has potential to introduce a third-generation wargaming capability to the Army, creating a positive overmatch decision-making capability. In its simplest form, agent-based modeling is a computational technique that helps the modeler understand and simulate how the "whole of a system" responds to change over time. It provides a decentralized method of looking at situations where individual agents are instantiated within an environment, interact with each other, and empowered to make their own decisions. However, this technology is not without its own risks and limitations. This paper explores a technology roadmap, identifying research topics that could realize agent-based modeling within a tactical wargaming context.

A Review of Technology-Based Youth and Family-Focused Interventions.

Science.gov (United States)

MacDonell, Kathleen Watson; Prinz, Ronald J

2017-06-01

In the past 10 years, mental and behavioral health has seen a proliferation of technology-based interventions in the form of online and other computer-delivered programs. This paper focuses on technology-based treatment and preventive interventions aimed at benefitting children and adolescents via either involving the parents and families, or only the youth. The review considered only technology-based interventions that had at least one published study with a randomized controlled trial design. Questions being addressed included: (1) What are the technology-based interventions in the mental/behavioral health area that have been systematically evaluated in published studies? (2) What are the common and unique characteristics of these interventions and their application with respect to sample characteristics, target problems, and technology characteristics (platforms, structures, elements, and communication formats)? and (3) Which intervention approaches and strategies have accrued the greatest evidence? The review identified 30 technology-based psychosocial interventions for children and families, 19 of which were parent or family-focused (32 studies) and 11 of which were youth-focused (in 13 studies). For the parent/family-focused interventions, greatest promise was found in those that addressed either youth behavioral problems or depressive/anxious symptoms, as well as more general bolstering of parenting efficacy. The youth-focused interventions showed some promise in reducing depressive/anxious symptoms. Advantages and disadvantages of the technology-based approaches were considered, and areas for future research and development were discussed.

Technology-Enhanced Problem-Based Learning Methodology in Geographically Dispersed Learners of Tshwane University of Technology

Directory of Open Access Journals (Sweden)

Sibitse M. Tlhapane

2010-03-01

Full Text Available Improving teaching and learning methodologies is not just a wish but rather strife for most educational institutions globally. To attain this, the Adelaide Tambo School of Nursing Science implemented a Technology-enhanced Problem-Based Learning methodology in the programme B Tech Occupational Nursing, in 2006. This is a two-year post-basic nursing program. The students are geographically dispersed and the curriculum design is the typically student-centred outcomes-based education. The research question posed by this paper is: How does technology-enhanced problem-based learning enhance student-centred learning, thinking skills, social skills and social space for learners? To answer the above question, a case study with both qualitative and quantitative data was utilised. The participants consisted of all students registered for the subject Occupational Health level 4. The sample group was chosen from willing participants from the Pretoria, eMalahleni and Polokwane learning sites, using the snowball method. This method was seen as appropriate due to the timing of the study. Data was collected using a questionnaire with both open and closed-ended questions. An analyses of the students‟ end of year examination was also done, including a comparison of performances by students on technology enhanced problem-based learning and those on problem-based learning only. The findings revealed that with Technology-enhanced Problem Based Learning (PBL, students‟ critical thinking, problem solving, and social skills improved and that social space was enhanced. This was supported by improved grades in students‟ on Technology-enhanced PBL as compared to those on PBL only.

TREHALOSE-BASED ADDITIVE IMPROVED INTER-PRIMER BINDING SITE REACTIONS FOR DNA ISOLATED FROM RECALCITRANT PLANTS

Directory of Open Access Journals (Sweden)

Veronika Lancíková

2014-02-01

Full Text Available Trehalose-based (TBT-PAR additive was tested in order to optimize PCR amplification for DNA isolated from recalcitrant plants. Retrotransposon-based inter-primer binding site reactions were significantly improved with TBT-PAR solution using genomic DNA isolated from flax (Linum usitatissimum L., genotypes Kyivskyi, Bethune grown in radio-contaminated and non-radioactive remediated Chernobyl experimental fields. Additionally, similar improvements were observed using 19 recalcitrant genotypes of maize (Zea mays L. and three genotypes of yacon (Smallanthus sonchifolius, Poepp. et Endl., genotypes PER05, ECU45, BOL22 grown in standard field conditions.

Hanford Permanent Isolation Barrier Program: Asphalt technology development

International Nuclear Information System (INIS)

Freeman, H.D.; Romine, R.A.

1994-11-01

An important component of the Hanford Permanent Isolation Barrier is the use of a two-layer composite asphalt system, which provides backup water diversion capabilities if the primary capillary barrier fails to meet infiltration goals. Because of asphalt's potential to perform to specification over the 1000-year design life criterion, a composite asphalt barrier (HMAC/fluid-applied polymer-modified asphalt) is being considered as an alternative to the bentonite clay/high density poly(ethylene) barriers for the low-permeability component of the Hanford Permanent Isolation Barrier. The feasibility of using asphalt as a long-term barrier is currently being studied. Information that must be known is the ability of asphalt to retain desirable physical properties over a period of 1000 years. This paper presents the approach for performing accelerated aging tests and evaluating the performance of samples under accelerated conditions. The results of these tests will be compared with asphalt artifact analogs and the results of modeling the degradation of the selected asphalt composite to make life-cycle predictions

MASS MEASUREMENTS OF ISOLATED OBJECTS FROM SPACE-BASED MICROLENSING

DEFF Research Database (Denmark)

Zhu, Wei; Novati, S. Calchi; Gould, A.

2016-01-01

lies behind the same amount of dust as the Bulge red clump, we find the lens is a 45 ± 7 {M}{{J}} BD at 5.9 ± 1.0 kpc. The lens of of the second event, OGLE-2015-BLG-0763, is a 0.50 ± 0.04 {M}⊙ star at 6.9 ± 1.0 kpc. We show that the probability to definitively measure the mass of isolated microlenses...... is dramatically increased once simultaneous ground- and space-based observations are conducted....

Adding Value to Goat Meat: Biochemical and Technological Characterization of Autochthonous Lactic Acid Bacteria to Achieve High-Quality Fermented Sausages

Directory of Open Access Journals (Sweden)

Miriam T. Nediani

2017-05-01

Full Text Available Quality and safety are important challenges in traditional fermented sausage technology. Consequently, the development of a tailored starter culture based on indigenous microbiota constitutes an interesting alternative. In the present study, spontaneously fermented goat meat sausages were created and analyzed using a physicochemical and microbiological approach. Thereafter 170 lactic acid bacteria (LAB strains were isolated and preliminary characterized by phenotypic assays. The hygienic and technological properties, and growth and fermentative potential of isolates using a goat-meat-based culture medium were evaluated. All strains proved to have bioprotective features due to their acidogenic metabolism. Almost all grew optimally in meat environments. LAB isolates presented proteolytic activity against meat proteins and enriched amino acid contents of the goat-meat-based model. The most efficient strains were four different Lactobacillus sakei isolates, as identified by genotyping and RAPD analysis. L. sakei strains are proposed as optimal candidates to improve the production of fermented goat meat sausages, creating a new added-value fermented product.

Adding Value to Goat Meat: Biochemical and Technological Characterization of Autochthonous Lactic Acid Bacteria to Achieve High-Quality Fermented Sausages.

Science.gov (United States)

Nediani, Miriam T; García, Luis; Saavedra, Lucila; Martínez, Sandra; López Alzogaray, Soledad; Fadda, Silvina

2017-05-17

Quality and safety are important challenges in traditional fermented sausage technology. Consequently, the development of a tailored starter culture based on indigenous microbiota constitutes an interesting alternative. In the present study, spontaneously fermented goat meat sausages were created and analyzed using a physicochemical and microbiological approach. Thereafter 170 lactic acid bacteria (LAB) strains were isolated and preliminary characterized by phenotypic assays. The hygienic and technological properties, and growth and fermentative potential of isolates using a goat-meat-based culture medium were evaluated. All strains proved to have bioprotective features due to their acidogenic metabolism. Almost all grew optimally in meat environments. LAB isolates presented proteolytic activity against meat proteins and enriched amino acid contents of the goat-meat-based model. The most efficient strains were four different Lactobacillus sakei isolates, as identified by genotyping and RAPD analysis. L. sakei strains are proposed as optimal candidates to improve the production of fermented goat meat sausages, creating a new added-value fermented product.

Adding Value to Goat Meat: Biochemical and Technological Characterization of Autochthonous Lactic Acid Bacteria to Achieve High-Quality Fermented Sausages

Science.gov (United States)

Nediani, Miriam T.; García, Luis; Saavedra, Lucila; Martínez, Sandra; López Alzogaray, Soledad; Fadda, Silvina

2017-01-01

Quality and safety are important challenges in traditional fermented sausage technology. Consequently, the development of a tailored starter culture based on indigenous microbiota constitutes an interesting alternative. In the present study, spontaneously fermented goat meat sausages were created and analyzed using a physicochemical and microbiological approach. Thereafter 170 lactic acid bacteria (LAB) strains were isolated and preliminary characterized by phenotypic assays. The hygienic and technological properties, and growth and fermentative potential of isolates using a goat-meat-based culture medium were evaluated. All strains proved to have bioprotective features due to their acidogenic metabolism. Almost all grew optimally in meat environments. LAB isolates presented proteolytic activity against meat proteins and enriched amino acid contents of the goat-meat-based model. The most efficient strains were four different Lactobacillus sakei isolates, as identified by genotyping and RAPD analysis. L. sakei strains are proposed as optimal candidates to improve the production of fermented goat meat sausages, creating a new added-value fermented product. PMID:28513575

Y-source impedance-network-based isolated boost DC/DC converter

DEFF Research Database (Denmark)

Siwakoti, Yam P.; Town, Graham; Loh, Poh Chiang

2014-01-01

A dc-dc converter with very high voltage gain is proposed in this paper for any medium-power application requiring a high voltage boost with galvanic isolation. The proposed converter topology can be realized using only two switches. With this topology a very high voltage boost can be achieved even...... with a relatively low duty cycle of the switches, and the gain obtainable is presently not matched by any existing impedance network based converter operated at the same duty ratio. The proposed converter has a Y-source impedance network to boost the voltage at the intermediate dc-link side and a push......-pull transformer for square-wave AC inversion and isolation. The voltage-doubler rectifier provides a constant dc voltage at the output stage. A theoretical analysis of the converter is presented, supported by simulation and experimental results. A 250 W down-scaled prototype was implemented in the laboratory...

Shaking table test and dynamic response analysis of 3-D component base isolation system using multi-layer rubber bearings and coil springs

Energy Technology Data Exchange (ETDEWEB)

Tsutsumi, Hideaki; Yamada, Hiroyuki; Ebisawa, Katsumi; Shibata, Katsuyuki [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Fujimoto, Shigeru [Toshiba Corp., Tokyo (Japan)

2001-06-01

Introduction of the base isolation technique into the seismic design of nuclear power plant components as well as buildings has been expected as one of the effective countermeasure to reduce the seismic force applied to components. A research program on the base isolation of nuclear components has been carried out at the Japan Atomic Energy Research Institute (JAERI) since 1991. A methodology and a computer code (EBISA: Equipment Base Isolation System Analysis) for evaluating the failure frequency of the nuclear component with the base isolation were developed. In addition, a test program, which is concerned with the above development, aiming at improvement of failure frequency analysis models in the code has been conducted since 1996 to investigate the dynamic behavior and to verify the effectiveness of component base isolation systems. Two base isolation test systems with different characteristics were fabricated and static and dynamic characteristics were measured by static loading and free vibration tests. One which consists of ball bearings and air springs was installed on the test bed to observe the dynamic response under natural earthquake motion. The effect of base isolation system has been observed under several earthquakes. Three-dimensional response and effect of base isolation of another system using multi-layer-rubber-bearings and coil springs has been investigated under various large earthquake motions by shaking table test. This report describes the results of the shaking table tests and dynamic response analysis. (author)

Quantification of Technology Innovation Usinga Risk-Based Framework

OpenAIRE

Gerard E. Sleefe

2010-01-01

There is significant interest in achieving technology innovation through new product development activities. It is recognized, however, that traditional project management practices focused only on performance, cost, and schedule attributes, can often lead to risk mitigation strategies that limit new technology innovation. In this paper, a new approach is proposed for formally managing and quantifying technology innovation. This approach uses a risk-based framework that s...

Genetic diversity of perch rhabdoviruses isolates based on the nucleoprotein and glycoprotein genes.

Science.gov (United States)

Talbi, Chiraz; Cabon, Joelle; Baud, Marine; Bourjaily, Maya; de Boisséson, Claire; Castric, Jeannette; Bigarré, Laurent

2011-12-01

Despite the increasing impact of rhabdoviruses in European percid farming, the diversity of the viral populations is still poorly investigated. To address this issue, we sequenced the partial nucleoprotein (N) and complete glycoprotein (G) genes of nine rhabdoviruses isolated from perch (Perca fluviatilis) between 1999 and 2010, mostly from France, and analyzed six of them by immunofluorescence antibody test (IFAT). Using two rabbit antisera raised against either the reference perch rhabdovirus (PRhV) isolated in 1980 or the perch isolate R6146, two serogroups were distinguished. Meanwhile, based on partial N and complete G gene analysis, perch rhabdoviruses were divided into four genogroups, A-B-D and E, with a maximum of 32.9% divergence (G gene) between isolates. A comparison of the G amino acid sequences of isolates from the two identified serogroups revealed several variable regions that might account for antigenic differences. Comparative analysis of perch isolates with other rhabdoviruses isolated from black bass, pike-perch and pike showed some strong phylogenetic relationships, suggesting cross-host transmission. Similarly, striking genetic similarities were shown between perch rhabdoviruses and isolates from other European countries and various ecological niches, most likely reflecting the circulation of viruses through fish trade as well as putative transfers from marine to freshwater fish. Phylogenetic relationships of the newly characterized viruses were also determined within the family Rhabdoviridae. The analysis revealed a genetic cluster containing only fish viruses, including all rhabdoviruses from perch, as well as siniperca chuatsi rhabdovirus (SCRV) and eel virus X (EVEX). This cluster was distinct from the one represented by spring viraemia of carp vesiculovirus (SVCV), pike fry rhabdovirus (PFRV) and mammalian vesiculoviruses. The new genetic data provided in the present study shed light on the diversity of rhabdoviruses infecting perch in

Competence Models in Technology-enhanced Competence-based Learning

NARCIS (Netherlands)

Sampson, Demetrios; Fytros, Demetrios

2008-01-01

Please cite as: Sampson, D., & Fytros, D. (2008). Competence Models in Technology-enhanced Competence-based Learning. In H. H. Adelsberger, Kinshuk, J. M. Pawlowski & D. Sampson (Eds.), International Handbook on Information Technologies for Education and Training, 2nd Edition, Springer, June 2008

Technological change of the energy innovation system: From oil-based to bio-based energy

International Nuclear Information System (INIS)

Wonglimpiyarat, Jarunee

2010-01-01

This paper concerns the structural developments and the direction of technological change of the energy innovation system, based on the studies of Kuhn's model of scientific change and Schumpeter's model of technological change. The paper uses the case study of Thai government agencies for understanding the way governments can facilitate technological innovation. The analyses are based on a pre-foresight exercise to examine the potential of the bio-based energy and investigate a set of development policies necessary for the direction of energy system development. The results have shown that bio-based energy is seen as the next new wave for future businesses and one of the solutions to the problem of high oil prices to improve the world's economic security and sustainable development. (author)

Space weather effects on ground based technology

Science.gov (United States)

Clark, T.

Space weather can affect a variety of forms of ground-based technology, usually as a result of either the direct effects of the varying geomagnetic field, or as a result of the induced electric field that accompanies such variations. Technologies affected directly by geomagnetic variations include magnetic measurements made d ringu geophysical surveys, and navigation relying on the geomagnetic field as a direction reference, a method that is particularly common in the surveying of well-bores in the oil industry. The most obvious technology affected by induced electric fields during magnetic storms is electric power transmission, where the example of the blackout in Quebec during the March 1989 magnetic storm is widely known. Additionally, space weather effects must be taken into account in the design of active cathodic protection systems on pipelines to protect them against corrosion. Long-distance telecommunication cables may also have to be designed to cope with space weather related effects. This paper reviews the effects of space weather in these different areas of ground-based technology, and provides examples of how mitigation against hazards may be achieved. (The paper does not include the effects of space weather on radio communication or satellite navigation systems).

On promotion of base technologies of atomic energy

International Nuclear Information System (INIS)

1988-01-01

In the long term plan of atomic energy development and utilization decided in June, 1987 by the Atomic Energy Commission, it was recognized that hereafter, the opening-up of the new potential that atomic energy possesses should be aimed at, and the policy was shown so that the research and development hereafter place emphasis on the creative and innovative region which causes large technical innovation, by which the spreading effect to general science and technology can be expected, and the development of the base technologies that connect the basic research and project development is promoted. The trend of atomic energy development so far, the change of the situation surrounding atomic energy, the direction of technical development of atomic energy hereafter and the base technologies are discussed. The concept of the technical development of materilas, artificial intelligence, lasers, and the evaluation and reduction of radiation risks used for atomic energy is described. As the development plan of atomic energy base technologies, the subjects of technical development, the future image of technical development, the efficient promotion of the development and so on are shown. (Kato, I.)

Mapping Students Use of Technologies in Problem Based Learning Environments

DEFF Research Database (Denmark)

Rongbutsri, Nikorn; Khalid, Md. Saifuddin; Ryberg, Thomas

2011-01-01

This paper aims to understand how students use technology to enhance their learning in problem-based learning environments. The research methodology is based on both qualitative and quantitative studies. The results are based on students’ interviews, a survey and students’ reflections in course......-related blog posts; they show that students have positive perceptions toward using technologies in problem-based learning environments....

Integrated optical isolators based on two-mode interference couplers

International Nuclear Information System (INIS)

Sun, Yiling; Zhou, Haifeng; Jiang, Xiaoqing; Hao, Yinlei; Yang, Jianyi; Wang, Minghua

2010-01-01

This paper presents an optical waveguide isolator based on two-mode interference (TMI) couplers, by utilizing the magneto-optical nonreciprocal phase shift (NPS). The operating principle of this device is to utilize the difference between the nonreciprocal phase shifts of the two lowest-order modes. A two-dimensional (2D) semi-vectorial finite difference method is used to calculate the difference between the nonreciprocal phase shifts of the two lowest-order modes and optimize the parameters. The proposed device may play an important role in integrated optical devices and optical communication systems

Genome-based analysis of Carbapenemase-producing Klebsiella pneumoniae isolates from German hospital patients, 2008-2014.

Science.gov (United States)

Becker, Laura; Kaase, Martin; Pfeifer, Yvonne; Fuchs, Stephan; Reuss, Annicka; von Laer, Anja; Sin, Muna Abu; Korte-Berwanger, Miriam; Gatermann, Sören; Werner, Guido

2018-01-01

By using whole genome sequence data we aimed at describing a population snapshot of carbapenemase-producing K. pneumoniae isolated from hospitalized patients in Germany between 2008 and 2014. We selected a representative subset of 107 carbapenemase-producing K. pneumoniae clinical isolates possessing the four most prevalent carbapenemase types in Germany (KPC-2, KPC-3, OXA-48, NDM-1). Isolates were processed via illumina NGS. Data were analysed using different SNP-based mapping and de-novo assembly approaches. Relevant information was extracted from NGS data (antibiotic resistance determinants, wzi gene/ cps type, virulence genes). NGS data from the present study were also compared with 238 genome data from two previous international studies on K. pneumoniae. NGS-based analyses revealed a preferred prevalence of KPC-2-producing ST258 and KPC-3-producing ST512 isolates. OXA-48, being the most prevalent carbapenemase type in Germany, was associated with various K. pneumoniae strain types; most of them possessing IncL/M plasmid replicons suggesting a preferred dissemination of bla OXA-48 via this well-known plasmid type. Clusters ST15, ST147, ST258, and ST512 demonstrated an intermingled subset structure consisting of German and other European K. pneumoniae isolates. ST23 being the most frequent MLST type in Asia was found only once in Germany. This latter isolate contained an almost complete set of virulence genes and a K1 capsule suggesting occurrence of a hypervirulent ST23 strain producing OXA-48 in Germany. Our study results suggest prevalence of "classical" K. pneumonaie strain types associated with widely distributed carbapenemase genes such as ST258/KPC-2 or ST512/KPC-3 also in Germany. The finding of a supposed hypervirulent and OXA-48-producing ST23 K. pneumoniae isolates outside Asia is highly worrisome and requires intense molecular surveillance.

PROBABILISTIC SEISMIC ASSESSMENT OF BASE-ISOLATED NPPS SUBJECTED TO STRONG GROUND MOTIONS OF TOHOKU EARTHQUAKE

Directory of Open Access Journals (Sweden)

AHMER ALI

2014-10-01

Full Text Available The probabilistic seismic performance of a standard Korean nuclear power plant (NPP with an idealized isolation is investigated in the present work. A probabilistic seismic hazard analysis (PSHA of the Wolsong site on the Korean peninsula is performed by considering peak ground acceleration (PGA as an earthquake intensity measure. A procedure is reported on the categorization and selection of two sets of ground motions of the Tohoku earthquake, i.e. long-period and common as Set A and Set B respectively, for the nonlinear time history response analysis of the base-isolated NPP. Limit state values as multiples of the displacement responses of the NPP base isolation are considered for the fragility estimation. The seismic risk of the NPP is further assessed by incorporation of the rate of frequency exceedance and conditional failure probability curves. Furthermore, this framework attempts to show the unacceptable performance of the isolated NPP in terms of the probabilistic distribution and annual probability of limit states. The comparative results for long and common ground motions are discussed to contribute to the future safety of nuclear facilities against drastic events like Tohoku.

Probabilistic seismic assessment of base-isolated NPPs subjected to strong ground motions of Tohoku earthquake

Energy Technology Data Exchange (ETDEWEB)

Ali, Ahmer; Hayah, Nadin Abu; Kim, Doo Kie [Dept. of Civil and Environmental Engineering, Kunsan National University, Kunsan (Korea, Republic of); Cho, Sung Gook [R and D Center, JACE KOREA Company, Gyeonggido (Korea, Republic of)

2014-10-15

The probabilistic seismic performance of a standard Korean nuclear power plant (NPP) with an idealized isolation is investigated in the present work. A probabilistic seismic hazard analysis (PSHA) of the Wolsong site on the Korean peninsula is performed by considering peak ground acceleration (PGA) as an earthquake intensity measure. A procedure is reported on the categorization and selection of two sets of ground motions of the Tohoku earthquake, i.e. long-period and common as Set A and Set B respectively, for the nonlinear time history response analysis of the base-isolated NPP. Limit state values as multiples of the displacement responses of the NPP base isolation are considered for the fragility estimation. The seismic risk of the NPP is further assessed by incorporation of the rate of frequency exceedance and conditional failure probability curves. Furthermore, this framework attempts to show the unacceptable performance of the isolated NPP in terms of the probabilistic distribution and annual probability of limit states. The comparative results for long and common ground motions are discussed to contribute to the future safety of nuclear facilities against drastic events like Tohoku.

Isolation, identification, characterization, and evaluation of cadmium removal capacity of Enterobacter species.

Science.gov (United States)

Abbas, Syed Zaghum; Rafatullah, Mohd; Ismail, Norli; Lalung, Japareng

2014-12-01

This study focused on the isolation and characterization of high cadmium-resistant bacterial strains, possible exploitation of its cadmium-accumulation and cadmium-induced proteins. Cadmium-resistant bacterial strains designated as RZ1 and RZ2 were isolated from industrial wastewater of Penang, Malaysia. These isolates were identified as Enterobacter mori and Enterobacter sp. WS12 on the basis of phenotypic, biochemical and 16S rDNA sequence based molecular phylogenetic characteristics. Both isolates were Gram negative, cocci, and growing well in Lauria-Bertani broth medium at 35 °C temperature and pH 7.0. Results also indicated that Enterobacter mori and Enterobacter sp. WS12are capable to remove 87.75 and 85.11% of the cadmium from 100 µg ml(-1) concentration, respectively. This study indicates that these strains can be useful as an inexpensive and efficient bioremediation technology to remove and recover the cadmium from wastewater. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

LNA probe-based assay for the detection of Tomato black ring virus isolates.

Science.gov (United States)

Hasiów-Jaroszewska, Beata; Rymelska, Natalia; Borodynko, Natasza

2015-02-01

Tomato black ring virus (TBRV) infects a wide range of economically important plant species worldwide. In the present study we developed a locked nucleic acid (LNA) real-time RT-PCR assay for accurate detection of genetically diverse TBRV isolates collected from different hosts. The assay based on the LNA probe has a wide detection range, high sensitivity, stability and amplification efficiency. The assay amplified all tested TBRV isolates, but no signal was observed for the RNA from other nepoviruses and healthy plant species. Under optimum reaction conditions, the detection limit was estimated around 17 copies of the TBRV target region in total RNA. Real-time RT-PCR with the LNA probe described in this paper will serve as a valuable tool for robust, sensitive and reliable detection of TBRV isolates. Copyright © 2014 Elsevier Ltd. All rights reserved.

False star detection and isolation during star tracking based on improved chi-square tests.

Science.gov (United States)

Zhang, Hao; Niu, Yanxiong; Lu, Jiazhen; Yang, Yanqiang; Su, Guohua

2017-08-01

The star sensor is a precise attitude measurement device for a spacecraft. Star tracking is the main and key working mode for a star sensor. However, during star tracking, false stars become an inevitable interference for star sensor applications, which may result in declined measurement accuracy. A false star detection and isolation algorithm in star tracking based on improved chi-square tests is proposed in this paper. Two estimations are established based on a Kalman filter and a priori information, respectively. The false star detection is operated through adopting the global state chi-square test in a Kalman filter. The false star isolation is achieved using a local state chi-square test. Semi-physical experiments under different trajectories with various false stars are designed for verification. Experiment results show that various false stars can be detected and isolated from navigation stars during star tracking, and the attitude measurement accuracy is hardly influenced by false stars. The proposed algorithm is proved to have an excellent performance in terms of speed, stability, and robustness.

Applying Sensor-Based Technology to Improve Construction Safety Management.

Science.gov (United States)

Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

2017-08-11

Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions.

Optimal cost design of base-isolated pool structures for the storage of nuclear spent fuel

International Nuclear Information System (INIS)

Ko, H. M.; Park, K. S.; Song, J. H.

1999-01-01

A method of cost-effectiveness evaluation for seismic isolated pool structures is presented. Input ground motion is modeled as spectral density function compatible with response spectrum for combination of acceleration coefficient and site coefficient. Interaction effects between flexible walls and contained fluid are considered in the form of added mass matrix. Wall thickness and isolator stiffness are adopted as design variables for optimization. Transfer function vector of the structure-isolator system is derived from the equation of motion. Spectral analysis method based on random vibration theories is used for the calculation of failure probability. The exemplifying designs and analyses show that cost-effectiveness of isolated pool structure is relatively high in low-moderate seismic region and stiff soil condition. Sensitiveness of optimal design variables to assumed damage scales is relatively low in such region

Energy and Transmissibility in Nonlinear Viscous Base Isolators

Science.gov (United States)

Markou, Athanasios A.; Manolis, George D.

2016-09-01

High damping rubber bearings (HDRB) are the most commonly used base isolators in buildings and are often combined with other systems, such as sliding bearings. Their mechanical behaviour is highly nonlinear and dependent on a number of factors. At first, a physical process is suggested here to explain the empirical formula introduced by J.M. Kelly in 1991, where the dissipated energy of a HDRB under cyclic testing, at constant frequency, is proportional to the amplitude of the shear strain, raised to a power of approximately 1.50. This physical process is best described by non-Newtonian fluid behaviour, originally developed by F.H. Norton in 1929 to describe creep in steel at high-temperatures. The constitutive model used includes a viscous term, that depends on the absolute value of the velocity, raised to a non-integer power. The identification of a three parameter Kelvin model, the simplest possible system with nonlinear viscosity, is also suggested here. Furthermore, a more advanced model with variable damping coefficient is implemented to better model in this complex mechanical process. Next, the assumption of strain-rate dependence in their rubber layers under cyclic loading is examined in order to best interpret experimental results on the transmission of motion between the upper and lower surfaces of HDRB. More specifically, the stress-relaxation phenomenon observed with time in HRDB can be reproduced numerically, only if the constitutive model includes a viscous term, that depends on the absolute value of the velocity raised to a non-integer power, i. e., the Norton fluid previously mentioned. Thus, it becomes possible to compute the displacement transmissibility function between the top and bottom surfaces of HDRB base isolator systems and to draw engineering-type conclusions, relevant to their design under time-harmonic loads.

Printing technologies for biomolecule and cell-based applications.

Science.gov (United States)

Ihalainen, Petri; Määttänen, Anni; Sandler, Niklas

2015-10-30

Biomolecules, such as enzymes, proteins and other biomacromolecules (polynucleotides, polypeptides, polysaccharides and DNA) that are immobilized on solid surfaces are relevant to many areas of science and technology. These functionalized surfaces have applications in biosensors, chromatography, diagnostic immunoassays, cell culturing, DNA microarrays and other analytical techniques. Printing technologies offer opportunities in this context. The main interests in printing biomolecules are in immobilizing them on surfaces for sensors and catalysts or for controlled delivery of protein-based drugs. Recently, there have been significant developments in the use of inkjet printing for dispensing of proteins, biomacromolecules and cells. This review discusses the use of roll-to-roll and inkjet printing technologies in manufacturing of biomolecule and cell-based applications. Copyright © 2015. Published by Elsevier B.V.

Optimum Shock Isolation

National Research Council Canada - National Science Library

Bolotnik, Nikolai

2001-01-01

.... Several types of performance criteria for isolation are considered, the most important of which are the peak force transmitted to the body to be isolated and the maximum displacement of the body relative to the base...

Survey of past base isolation applications in nuclear power plants and challenges to industry/regulatory acceptance

International Nuclear Information System (INIS)

Malushte, S.R.; Whittaker, A.S.

2005-01-01

Seismic base isolation provides many benefits that can facilitate the standardization of future nuclear power plant structures and equipment while reducing the initial/life-cycle cost and construction schedule. This paper presents a survey of past seismic base isolation applications and studies related to nuclear applications and provides a discussion of the challenges that need to be overcome to gain industry and regulatory acceptance for deployment in future US nuclear power plants. Issues related to design, codes/standards/regulations, procurement, and construction, have been identified. (authors)

Isolation and identification of radiation resistant yeasts from sea water

International Nuclear Information System (INIS)

Park, Jong Cheon; Jeong, Yong Uk; Kim, Du Hong; Jo, Eun A

2011-12-01

This study was conducted to isolate radiation-resistant yeasts from sea water for development of application technology of radiation-resistant microorganism. · Isolation of 656 yeasts from sea water and selection of 2 radiation-resistant yeasts (D 10 value >3) · Identification of isolated yeasts as Filobasidium elegans sharing 99% sequence similarity · Characterization of isolated yeast with ability to repair of the DNA damage and membrane integrity to irradiation

LIFE-CYCLE COST MODEL AND DESIGN OPTIMIZATION OF BASE ISOLATED BUILDING STRUCTURES

Directory of Open Access Journals (Sweden)

Chara C. Mitropoulou

2016-11-01

Full Text Available Design of economic structures adequately resistant to withstand during their service life, without catastrophic failures, all possible loading conditions and to absorb the induced seismic energy in a controlled fashion, has been the subject of intensive research so far. Modern buildings usually contain extremely sensitive and costly equipment that are vital in business, commerce, education and/or health care. The building contents frequently are more valuable than the buildings them-selves. Furthermore, hospitals, communication and emergency centres, police and fire stations must be operational when needed most: immediately after an earthquake. Conventional con-struction can cause very high floor accelerations in stiff buildings and large interstorey drifts in flexible structures. These two factors cause difficulties in insuring the safety of both building and its contents. For this reason base-isolated structures are considered as an efficient alternative design practice to the conventional fixed-base one. In this study a systematic assessment of op-timized fixed and base-isolated reinforced concrete buildings is presented in terms of their initial and total cost taking into account the life-cycle cost of the structures.

A market-driven commercialization strategy for gasification-based technologies

International Nuclear Information System (INIS)

Klara, J.M.; Tomer, B.J.; Stiegel, G.J.

1998-01-01

In the wake of deregulation of power generation in the US, market-based competition is driving electricity generators to low-cost risk system. In such an environment, gasification-based technologies will not be competitive with low capital cost, efficient, and reliable natural gas-fired facilities for baseload power generation in the foreseeable future. The lack of a near-term market application poses a serious threat to the progress of gasification technology. With a reduction in direct federal funding of large-scale demonstration plants as the trend to reduce the size of government continues, an alternate approach to commercialize gasification-based technologies has been developed at DOE/FETC. This new strategy employs gasification in near-term markets where, due to its ability to coproduce a wide variety of commodity and premium products to meet market requirements, it is an attractive alternative. By obtaining operating experience in near-term coproduction applications, gasification system modules can be refined and improved leading to commercial guarantees and acceptance of gasification technology as a cost-effective technology for baseload power generation when this market begins to open domestically, sometime after 2005

Isolation of monoclonal antibodies with predetermined conformational epitope specificity.

Directory of Open Access Journals (Sweden)

Anton M Sholukh

Full Text Available Existing technologies allow isolating antigen-specific monoclonal antibodies (mAbs from B cells. We devised a direct approach to isolate mAbs with predetermined conformational epitope specificity, using epitope mimetics (mimotopes that reflect the three-dimensional structure of given antigen subdomains. We performed differential biopanning using bacteriophages encoding random peptide libraries and polyclonal antibodies (Abs that had been affinity-purified with either native or denatured antigen. This strategy yielded conformational mimotopes. We then generated mimotope-fluorescent protein fusions, which were used as baits to isolate single memory B cells from rhesus monkeys (RMs. To amplify RM immunoglobulin variable regions, we developed RM-specific PCR primers and generated chimeric simian-human mAbs with predicted epitope specificity. We established proof-of-concept of our strategy by isolating mAbs targeting the conformational V3 loop crown of HIV Env; the new mAbs cross-neutralized viruses of different clades. The novel technology allows isolating mAbs from RMs or other hosts given experimental immunogens or infectious agents.

A PD-SOI based DTI-LOCOS combined cross isolation technique for minimizing TID radiation induced leakage in high density memory

International Nuclear Information System (INIS)

Qiao Fengying; Pan Liyang; Wu Dong; Liu Lifang; Xu Jun

2014-01-01

In order to minimize leakage current increase under total ionizing dose (TID) radiation in high density memory circuits, a new isolation technique, combining deep trench isolation (DTI) between the wells, local oxidation of silicon (LOCOS) isolation between the devices within the well, and a P-diffused area in order to limit leakage at the isolation edge is implemented in partly-depleted silicon-on-insulator (PD-SOI) technology. This radiation hardening technique can minimize the layout area by more than 60%, and allows flexible placement of the body contact. Radiation hardened transistors and 256 Kb flash memory chips are designed and fabricated in a 0.6 μm PD-SOI process. Experiments show that no obvious increase in leakage current is observed for single transistors under 1 Mrad(Si) radiation, and that the 256 Kb memory chip still functions well after a TID of 100 krad(Si), with only 50% increase of the active power consumption in read mode. (semiconductor devices)

Prevalence, identification by a DNA microarray-based assay of human and food isolates Listeria spp. from Tunisia.

Science.gov (United States)

Hmaïed, F; Helel, S; Le Berre, V; François, J-M; Leclercq, A; Lecuit, M; Smaoui, H; Kechrid, A; Boudabous, A; Barkallah, I

2014-02-01

We aimed at evaluating the prevalence of Listeria species isolated from food samples and characterizing food and human cases isolates. Between 2005 and 2007, one hundred food samples collected in the markets of Tunis were analysed in our study. Five strains of Listeria monocytogenes responsible for human listeriosis isolated in hospital of Tunis were included. Multiplex PCR serogrouping and pulsed field gel electrophoresis (PFGE) applying the enzyme AscI and ApaI were used for the characterization of isolates of L. monocytogenes. We have developed a rapid microarray-based assay to a reliable discrimination of species within the Listeria genus. The prevalence of Listeria spp. in food samples was estimated at 14% by using classical biochemical identification. Two samples were assigned to L. monocytogenes and 12 to L. innocua. DNA microarray allowed unambiguous identification of Listeria species. Our results obtained by microarray-based assay were in accordance with the biochemical identification. The two food L. monocytogenes isolates were assigned to the PCR serogroup IIa (serovar 1/2a). Whereas human L. monocytogenes isolates were of PCR serogroup IVb, (serovars 4b). These isolates present a high similarity in PFGE. Food L. monocytogenes isolates were classified into two different pulsotypes. These pulsotypes were different from that of the five strains responsible for the human cases. We confirmed the presence of Listeria spp. in variety of food samples in Tunis. Increased food and clinical surveillance must be taken into consideration in Tunisia to identify putative infections sources. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Evaluation of Traditional and Technology-Based Grocery Store Nutrition Education

Science.gov (United States)

Schultz, Jennifer; Litchfield, Ruth

2016-01-01

Background: A literature gap exists for grocery interventions with realistic resource expectations; few technology-based publications exist, and none document traditional comparison. Purpose: Compare grocery store traditional aisle demonstrations (AD) and technology-based (TB) nutrition education treatments. Methods: A quasi-experimental 4-month…

Communicating Customer Value Based on Modern Technologies

Directory of Open Access Journals (Sweden)

Slawomir Czarniewski

2014-06-01

Full Text Available The article presents the idea of gaining a position of competitive advantage by companies operating in the knowledge-based economy and in the age of modern technology. The rate of change in companies’ environments forces organizations to react quickly to clients’ needs. In recent years, there has been an observed systematic increase in the importance of communicating customer value in Poland. This paper shows changes (trends in the system of market communication in the age of modern technology and changes in the economy. The author presents the mechanisms and effects of communication in age new technology in Poland. Modern technologies enable the collection, storage and transmission of information. Reflections contained in the paper do not have definite characteristics and should be treated as an opinion in the discussion.

TX-RX isolation method based on polarization diversity, spatial diversity and TX beamforming

DEFF Research Database (Denmark)

Foroozanfard, Ehsan; Carvalho, Elisabeth De; Pedersen, Gert F.

2016-01-01

In this paper, the feasibility of an antenna isolation technique based on null-steer beamforming, polarization diversity and spatial diversity is investigated. The proposed system consists of six patch antennas which are fed by a feeding network to obtain a null-steer beamformer. To achieve spatial...... diversity, antenna elements are located on two layers, facing in a different direction. Moreover, the antenna elements in two layers use different polarization. The measured results of the antenna system present a high TX-RX isolation in the order of 70 dB which shows the feasibility of such a system...

Screening and identification of lactic acid bacteria isolated from ...

African Journals Online (AJOL)

The lactic acid bacteria (LAB) isolated from sorghum (Sorghum bicolor. L.) silage were identified during different periods of evolution of sorghum silage in west Algeria. Morphological, physiological, biochemical and technological techniques were used to characterize lactic acid bacteria isolates. A total number of 27 ...

Silicon on insulator technology. Characteristics. Applications; Technologies silicium sur isolant. Caracteristiques. Exemples d'application

Energy Technology Data Exchange (ETDEWEB)

Suat, J. P.; Peccoud, L.; Le Goascoz, V.; Garcia, M.; Mackowiak, E.

1975-01-31

The advantages resulting from a SOS (Silicon-on-Sapphire) MOS technology are demonstrated. Experimental results giving the performance of C.MOS and depletion-enrichment P-channel technologies are presented, with an application of Silicon on insulator on development, that is to say a 1024 bits MNOS memory, peripheral circuits being developed according to the depletion-enrichment technology.

Isolated patellofemoral osteoarthritis.

NARCIS (Netherlands)

Jonbergen, J.P.W. van; Poolman, R.W.; Kampen, A. van

2010-01-01

BACKGROUND AND PURPOSE: The optimal treatment for isolated patellofemoral osteoarthritis is unclear at present. We systematically reviewed the highest level of available evidence on the nonoperative and operative treatment of isolated patellofemoral osteoarthritis to develop an evidenced-based

Graphene devices based on laser scribing technology

Science.gov (United States)

Qiao, Yan-Cong; Wei, Yu-Hong; Pang, Yu; Li, Yu-Xing; Wang, Dan-Yang; Li, Yu-Tao; Deng, Ning-Qin; Wang, Xue-Feng; Zhang, Hai-Nan; Wang, Qian; Yang, Zhen; Tao, Lu-Qi; Tian, He; Yang, Yi; Ren, Tian-Ling

2018-04-01

Graphene with excellent electronic, thermal, optical, and mechanical properties has great potential applications. The current devices based on graphene grown by micromechanical exfoliation, chemical vapor deposition (CVD), and thermal decomposition of silicon carbide are still expensive and inefficient. Laser scribing technology, a low-cost and time-efficient method of fabricating graphene, is introduced in this review. The patterning of graphene can be directly performed on solid and flexible substrates. Therefore, many novel devices such as strain sensors, acoustic devices, memory devices based on laser scribing graphene are fabricated. The outlook and challenges of laser scribing technology have also been discussed. Laser scribing may be a potential way of fabricating wearable and integrated graphene systems in the future.

Croatia's rural areas - renewable energy based electricity generation for isolated grids

Directory of Open Access Journals (Sweden)

Protic Sonja Maria

2014-01-01

Full Text Available Several Western Balkan states face the consequences of the Yugoslavian war, which left hometowns with dilapidated electricity grid connections, a high average age of power plant capacities and low integration of renewable energy sources, grid bottlenecks and a lack of competition. In order to supply all households with electricity, UNDP Croatia did a research on decentralized supply systems based on renewable energy sources. Decentralized supply systems offer cheaper electricity connections and provide faster support to rural development. This paper proposes a developed methodology to financially compare isolated grid solutions that primarily use renewable energies to an extension of the public electricity network to small regions in Croatia. Isolated grid supply proves to be very often a preferable option. Furthermore, it points out the lack of a reliable evaluation of non-monetizable aspects and promotes a new interdisciplinary approach.

Drivers of international performance of Brazilian technology-based firms

OpenAIRE

Serpa Fagundes de Oliveira, Maria Carolina; Scherer, Flavia Luciane; Schneider Hahn, Ivanete; de Moura Carpes, Aletéia; Brachak dos Santos, Maríndia; Nunes Piveta, Maíra

2018-01-01

For Technology-Based Firms, international expansion represents an opportunity for growth and value creation. The present study was designed to analyze the role of technology-based companies (TBCs) internationalization drivers on international performance. Therefore, a descriptive research was carried out with a quantitative approach performed through a survey. Data collection happened with 53 Brazilian TBCs located in innovation habitats. These data were analyzed by multivariate statistical t...

RNA isolation from bloodstains collected on FTA cards - application in clinical and forensic genetics.

Science.gov (United States)

Skonieczna, Katarzyna; Styczyński, Jan; Krenska, Anna; Wysocki, Mariusz; Jakubowska, Aneta; Grzybowski, Tomasz

2016-01-01

Aim of the study: In recent years, RNA analysis has been increasingly used in clinical and forensic genetics. Nevertheless, a major limitation of RNA-based applications is very low RNA stability in biological material, due to the RNAse activity. This highlights the need for improving the methods of RNA collection and storage. Technological approaches such as FTA Classic Cards (Whatman) could provide a solution for the problem of RNA degradation. However, different methods of RNA isolation from FTA cards could have diverse effects on RNA quantity and quality. The purpose of this research was to analyze the utility of three different methods of RNA isolation from peripheral blood collected on FTA Classic Cards (Whatman). The study also aimed at assessing RNA stability in bloodstains deposited on FTA cards. Material and methods: The study was performed on peripheral bloodstains collected from 59 individuals on FTA Classic Cards (Whatman). RNA was isolated with High Pure RNA Isolation Kit (Roche Diagnostics), Universal RNA/miRNA Purification (EURx) and TRIzol Reagent (Life Technologies). RNA was subjected to quantitative analysis followed by reverse transcription and Real - Time PCR reaction. Results: The study has shown that FTA Classic Cards (Whatman) are useful tools for storing bloodstains at room temperature for RNA analysis. Moreover, the method of RNA extraction employing TRIzol Reagent (Life Technologies) provides the highest efficiency and reproducibility for samples stored for no more than 2 years. Conclusions: The FTA cards are suitable for collecting and storing bloodstains for RNA analysis in clinical and forensic genetics.

The experiment research of the friction sliding isolation structure

Science.gov (United States)

Zhang, Shirong; Li, Jiangle; Wang, Sheliang

2018-04-01

This paper investigated the theory of the friction sliding isolation structure, The M0S2 solid lubricant was adopted as isolation bearing friction materials, and a new sliding isolation bearing was designed and made. The formula of the friction factor and the compression stress was proposed. The feasibility of the material MoS2 used as the coating material in a friction sliding isolation system was tested on the 5 layers concrete frame model. Two application experiment conditions were presented. The results of the experiment research indicated that the friction sliding isolation technology have a good damping effect.

Development of electromagnetic induction diagnostics technology for condition based maintenance

International Nuclear Information System (INIS)

Mawatari, Shingo; Oeda, Kaoru; Yatogi, Hideo; Fukuchi, Taira; Ueno, Tadashi

2008-01-01

In ROKKASHO Reprocessing Plant (below, called 'RRP'), we have applied Condition Based Maintenance to rotating equipment with vibration diagnostics technology. However, a few rotating equipment are difficult to diagnose definitely, because have structural problems which exercise vibrational noise to peripheral and be impossible to install vibratory sensor. Electromagnetic induction diagnostics technology which measure magnetic fields to eddy current which is induced to rotary through static magnetic field, diagnose deterioration behavior such as abrasion and crack. As a result, it has possibilities to clear above problems. Therefore, we started our basic researches with this technology for Condition Based Maintenance. In this paper, it introduces basic data about 'Non-seal pump' that have installed in RRP. As a result, this technology is a possibility that be able to detect Condition Based Maintenance. (author)

Using shadow page cache to improve isolated drivers performance.

Science.gov (United States)

Zheng, Hao; Dong, Xiaoshe; Wang, Endong; Chen, Baoke; Zhu, Zhengdong; Liu, Chengzhe

2015-01-01

With the advantage of the reusability property of the virtualization technology, users can reuse various types and versions of existing operating systems and drivers in a virtual machine, so as to customize their application environment. In order to prevent users' virtualization environments being impacted by driver faults in virtual machine, Chariot examines the correctness of driver's write operations by the method of combining a driver's write operation capture and a driver's private access control table. However, this method needs to keep the write permission of shadow page table as read-only, so as to capture isolated driver's write operations through page faults, which adversely affect the performance of the driver. Based on delaying setting frequently used shadow pages' write permissions to read-only, this paper proposes an algorithm using shadow page cache to improve the performance of isolated drivers and carefully study the relationship between the performance of drivers and the size of shadow page cache. Experimental results show that, through the shadow page cache, the performance of isolated drivers can be greatly improved without impacting Chariot's reliability too much.

Risk-based systems analysis of emerging high-level waste tank remediation technologies. Volume 2: Final report

International Nuclear Information System (INIS)

Peters, B.B.; Cameron, R.J.; McCormack, W.D.

1994-08-01

The objective of DOE's Radioactive Waste Tank Remediation Technology Focus Area is to identify and develop new technologies that will reduce the risk and/or cost of remediating DOE underground waste storage tanks and tank contents. There are, however, many more technology investment opportunities than the current budget can support. Current technology development selection methods evaluate new technologies in isolation from other components of an overall tank waste remediation system. This report describes a System Analysis Model developed under the US Department of Energy (DOE) Office of Technology Development (OTD) Underground Storage Tank-Integrated Demonstration (UST-ID) program. The report identifies the project objectives and provides a description of the model. Development of the first ''demonstration'' version of this model and a trial application have been completed and the results are presented. This model will continue to evolve as it undergoes additional user review and testing

Risk-based systems analysis of emerging high-level waste tank remediation technologies. Volume 2: Final report

Energy Technology Data Exchange (ETDEWEB)

Peters, B.B.; Cameron, R.J.; McCormack, W.D. [Enserch Environmental Corp., Richland, WA (United States)

1994-08-01

The objective of DOE`s Radioactive Waste Tank Remediation Technology Focus Area is to identify and develop new technologies that will reduce the risk and/or cost of remediating DOE underground waste storage tanks and tank contents. There are, however, many more technology investment opportunities than the current budget can support. Current technology development selection methods evaluate new technologies in isolation from other components of an overall tank waste remediation system. This report describes a System Analysis Model developed under the US Department of Energy (DOE) Office of Technology Development (OTD) Underground Storage Tank-Integrated Demonstration (UST-ID) program. The report identifies the project objectives and provides a description of the model. Development of the first ``demonstration`` version of this model and a trial application have been completed and the results are presented. This model will continue to evolve as it undergoes additional user review and testing.

Analysis of a Frame-Shear Wall Concrete Structure by Using Base Isolation and Evaluation of Structure-Soil Interaction

Directory of Open Access Journals (Sweden)

H. I. Polat

2017-12-01

Full Text Available A base isolation system is a type of earthquake-resistant structure design approach based on the principle of reducing a structure’s earthquake response rather than increasing the structure’s earthquake resistance capacity. Seismic base isolated structures have the ability to make large displacements relative to the level of insulation elements. This means that a large structure performs very small displacements between floors during an earthquake and exhibits a rigid body behavior. At this point, the earthquake forces acting on the structure decrease along with the floors. In this article a school building composed of frame-shear wall is resolved primarily with the traditional fixed base structure system, mode shapes are found and periods are obtained. For earthquake response analysis, earthquake loads are distributed to the floors using the equivalent seismic load method and structural elements experiencing capacity problems are found. Then, using the earthquake record, larger failure of cross sections and capacity problems are obtained compared to the first method. In the second stage, the same structure is dissolved again by placing the lead core rubber base isolators between the base and the vertical structural members. The periods of structures under earthquake load have increased significantly by utilizing base isolation, as a result of that spectral accelerations decreased. Thus, large decreases in the shear forces acting to the structure are determined and failures of cross sections are removed.

Internet of Things technology-based management methods for environmental specimen banks.

Science.gov (United States)

Peng, Lihong; Wang, Qian; Yu, Ang

2015-02-01

The establishment and management of environmental specimen banks (ESBs) has long been a problem worldwide. The complexity of specimen environment has made the management of ESB likewise complex. Through an analysis of the development and management of ESBs worldwide and in light of the sophisticated Internet of Things (IOT) technology, this paper presents IOT technology-based ESB management methods. An IOT technology-based ESB management system can significantly facilitate ESB ingress and egress management as well as long-term storage management under quality control. This paper elaborates on the design of IOT technology-based modules, which can be used in ESB management to achieve standardized, smart, information-based ESB management. ESB management has far-reaching implications for environmental management and for research in environmental science.

KBTAC [Knowledge-Based Technology Application Center] - The EPRI [Electric Power Research Institute]-sponsored knowledge-based technology application center

International Nuclear Information System (INIS)

Meyer, W.; Wood, R.M.; Scherer, J.

1990-01-01

The Electric Power Research Institute (EPRI) has announced the establishment of the Knowledge-Based Technology Application Center (KBTAC), whose goal is to assist member utilities with expert system technology and applications. The center, established November 7, 1989, is located on the campus of Syracuse University, Syracuse, New York, and will be operated jointly by Kaman Sciences Corporation and the university. The mission of the KBTAC is to assist EPRI member utilities to develop, test, and transfer expert systems into nuclear power plant operations, maintenance, and administration

Mechanical modeling for magnetorheological elastomer isolators based on constitutive equations and electromagnetic analysis

Science.gov (United States)

Wang, Qi; Dong, Xufeng; Li, Luyu; Ou, Jinping

2018-06-01

As constitutive models are too complicated and existing mechanical models lack universality, these models are beyond satisfaction for magnetorheological elastomer (MRE) devices. In this article, a novel universal method is proposed to build concise mechanical models. Constitutive model and electromagnetic analysis were applied in this method to ensure universality, while a series of derivations and simplifications were carried out to obtain a concise formulation. To illustrate the proposed modeling method, a conical MRE isolator was introduced. Its basic mechanical equations were built based on equilibrium, deformation compatibility, constitutive equations and electromagnetic analysis. An iteration model and a highly efficient differential equation editor based model were then derived to solve the basic mechanical equations. The final simplified mechanical equations were obtained by re-fitting the simulations with a novel optimal algorithm. In the end, verification test of the isolator has proved the accuracy of the derived mechanical model and the modeling method.

Center for BioBased Binders and Pollution Reduction Technology

Energy Technology Data Exchange (ETDEWEB)

Thiel, Jerry [Univ. of Northern Iowa, Cedar Falls, IA (United States)

2013-07-01

Funding will support the continuation of the Center for Advanced Bio-based Binders and Pollution Reduction Technology Center (CABB) in the development of bio-based polymers and emission reduction technologies for the metal casting industry. Since the formation of the center several new polymers based on agricultural materials have been developed. These new materials have show decreases in hazardous air pollutants, phenol and formaldehyde as much as 50 to 80% respectively. The polymers termed bio-polymers show a great potential to utilize current renewable agricultural resources to replace petroleum based products and reduce our dependence on importing of foreign oil. The agricultural technology has shown drastic reductions in the emission of hazardous air pollutants and volatile organic compounds and requires further development to maintain competitive costs and productivity. The project will also research new and improved inorganic binders that promise to eliminate hazardous emissions from foundry casting operations and allow for the beneficial reuse of the materials and avoiding the burdening of overcrowded landfills.

Performance of sand and shredded rubber tire mixture as a natural base isolator for earthquake protection

Science.gov (United States)

Bandyopadhyay, Srijit; Sengupta, Aniruddha; Reddy, G. R.

2015-12-01

The performance of a well-designed layer of sand, and composites like layer of sand mixed with shredded rubber tire (RSM) as low cost base isolators, is studied in shake table tests in the laboratory. The building foundation is modeled by a 200 mm by 200 mm and 40 mm thick rigid plexi-glass block. The block is placed in the middle of a 1m by 1m tank filled with sand. The selected base isolator is placed between the block and the sand foundation. Accelerometers are placed on top of the footing and foundation sand layer. The displacement of the footing is also measured by LVDT. The whole setup is mounted on a shake table and subjected to sinusoidal motions with varying amplitude and frequency. Sand is found to be effective only at very high amplitude (> 0.65 g) of motions. The performance of a composite consisting of sand and 50% shredded rubber tire placed under the footing is found to be most promising as a low-cost effective base isolator.

MAS: Malware Analysis System Based on Hardware-Assisted Virtualization Technology

Science.gov (United States)

Kim, Taehyoung; Kim, Inhyuk; Min, Changwoo; Eom, Young Ik

There are many analysis techniques in order to analyze malicious codes. However, recently malicious codes often evade detection using stealthy obfuscation techniques, and attack computing systems. We propose an enhanced dynamic binary instrumentation using hardware-assisted virtualization technology. As a machine-level analyzer, our system can be isolated from almost the whole threats of malware, and provides single step analysis environment. Proposed system also supports rapid system call analysis environment. We implement our malware analysis system (referred as MAS) on the KVM hypervisor with Intel VT-x virtualization support. Our experiments with benchmarks show that the proposed system provides efficient analysis environment with low overhead.

Output-based allocation and investment in clean technologies

Energy Technology Data Exchange (ETDEWEB)

Rosendahl, Knut Einar; Storroesten, Halvor Briseid

2011-07-01

Allocation of emission allowances may affect firms' incentives to invest in clean technologies. In this paper we show that so-called output-based allocation tends to stimulate such investments as long as individual firms do not assume the regulator to tighten the allocation rule as a consequence of their investments. The explanation is that output-based allocation creates an implicit subsidy to the firms' output, which increases production, leads to a higher price of allowances, and thus increases the incentives to invest in clean technologies. On the other hand, if the firms expect the regulator to tighten the allocation rule after observing their clean technology investment, the firms' incentives to invest are moderated. If strong, this last effect may outweigh the enhanced investment incentives induced by increased output and higher allowance price. (Author)

Recent results of seismic isolation study in CRIEPI: Tests on seismic isolation elements, vibration tests and observations

International Nuclear Information System (INIS)

Ishida, Katsuhiko; Shiojiri, Hiroo; Mazda, Taiji; Ohtori, Yasuki; Aoyagi, Sakae

1992-01-01

Seismic isolation is expected to be effective in raising reliability during earthquake, reducing cost, enlarging and promoting the design standardization of electric power facilities. In Japan, it has been applied to several buildings. However it is considered that more research is needed to verify the reliability and effectiveness of seismic isolation for fast breeder reactors. In the preliminary study of isolation concepts for FBRs the horizontal base isolation of buildings was investigated in detail. The laminated rubber bearings were considered to be most suitable isolation system. Tests on large scale models of rubber bearing and vibration test of base isolation system have been conducted as well as the earthquake response observation of isolated buildings were conducted

Recent results of seismic isolation study in CRIEPI: Tests on seismic isolation elements, vibration tests and observations

Energy Technology Data Exchange (ETDEWEB)

Ishida, Katsuhiko; Shiojiri, Hiroo; Mazda, Taiji; Ohtori, Yasuki [Abiko Research Laboratory, Central Research Institute of Electric Power Industry (Japan); Aoyagi, Sakae [Central Research Institute of Electric Power Industry (Japan)

1992-07-01

Seismic isolation is expected to be effective in raising reliability during earthquake, reducing cost, enlarging and promoting the design standardization of electric power facilities. In Japan, it has been applied to several buildings. However it is considered that more research is needed to verify the reliability and effectiveness of seismic isolation for fast breeder reactors. In the preliminary study of isolation concepts for FBRs the horizontal base isolation of buildings was investigated in detail. The laminated rubber bearings were considered to be most suitable isolation system. Tests on large scale models of rubber bearing and vibration test of base isolation system have been conducted as well as the earthquake response observation of isolated buildings were conducted.

Data set for the mass spectrometry based exoproteome analysis of Aspergillus flavus isolates

Directory of Open Access Journals (Sweden)

Ramu Muthu Selvam

2015-03-01

Full Text Available Aspergillus flavus is one of the predominant causative organisms of mycotic keratitis in tropical parts of the world. Extracellular proteins are the earliest proteins that come in contact with the host and have a role in the infection process. Exoproteins of A. flavus isolated from infected cornea, sputum and a saprophyte were pooled and identified using high resolution mass spectrometry in order to get the total exoproteome from cultures isolated from different sources. A total of 637 proteins was identified from the pooled A. flavus exoproteome. Analysis based on GO annotations of the 637 identified proteins revealed that hydrolases form the predominant class of proteins in the exoproteome. Interestingly, a greater proportion of the exoproteins seem to be secreted through the non-classical pathways. This data represent the first in-depth analysis of the representative A. flavus exoproteome of a large set of isolates from distinct sources. This data have been deposited to the ProteomeXchange with identifier PXD001296.

An empirical comparison of isolate-based and sample-based definitions of antimicrobial resistance and their effect on estimates of prevalence.

Science.gov (United States)

Humphry, R W; Evans, J; Webster, C; Tongue, S C; Innocent, G T; Gunn, G J

2018-02-01

Antimicrobial resistance is primarily a problem in human medicine but there are unquantified links of transmission in both directions between animal and human populations. Quantitative assessment of the costs and benefits of reduced antimicrobial usage in livestock requires robust quantification of transmission of resistance between animals, the environment and the human population. This in turn requires appropriate measurement of resistance. To tackle this we selected two different methods for determining whether a sample is resistant - one based on screening a sample, the other on testing individual isolates. Our overall objective was to explore the differences arising from choice of measurement. A literature search demonstrated the widespread use of testing of individual isolates. The first aim of this study was to compare, quantitatively, sample level and isolate level screening. Cattle or sheep faecal samples (n=41) submitted for routine parasitology were tested for antimicrobial resistance in two ways: (1) "streak" direct culture onto plates containing the antimicrobial of interest; (2) determination of minimum inhibitory concentration (MIC) of 8-10 isolates per sample compared to published MIC thresholds. Two antibiotics (ampicillin and nalidixic acid) were tested. With ampicillin, direct culture resulted in more than double the number of resistant samples than the MIC method based on eight individual isolates. The second aim of this study was to demonstrate the utility of the observed relationship between these two measures of antimicrobial resistance to re-estimate the prevalence of antimicrobial resistance from a previous study, in which we had used "streak" cultures. Boot-strap methods were used to estimate the proportion of samples that would have tested resistant in the historic study, had we used the isolate-based MIC method instead. Our boot-strap results indicate that our estimates of prevalence of antimicrobial resistance would have been

State-of-the-art report for the instrumentation and control technology based on the nuclear-information technology convergence

International Nuclear Information System (INIS)

Kwon, Kee Choon; Kim, Chang Hwoi; Lee, Dong Young; Lee, Cheol Kwon; Lee, Hyun Chul

2011-12-01

As digitalized the instrumentation and control systems in nuclear power plants, in the past that were implemented in an analog system or circuit for monitoring, control and protection, most of the them is implemented in embedded software based on hardware platform. Digital instrumentation and control system hardware platforms and a digital safety systems have developed in Korea. The fundamental technology of the software part of MMIS (Man-Machine Interface System) has achieved the localization. But in order to secure our global competitiveness, in the -based software, the source of the content areas / It is needed to develop core technologies of the software and contents areas based on the nuclear-IT convergence technology. In this report, the IT technology centered for the characteristics of embedded software applied to nuclear power is described. Also state-of-the-art IT technologies that will converge to nuclear power plants are mentioned

Application of Technology in Project-Based Distance Learning

Directory of Open Access Journals (Sweden)

Ali Mehrabian

2008-06-01

Full Text Available Present technology and the accessibility of internet have made distance learning easier, more efficient, and more convenient for students. This technology allows instructors and students to communicate asynchronously, at times and locations of their own choosing, by exchanging printed or electronic information. The use of project-based approach is being recognized in the literature as a potential component of courses in the faculties of engineering, science, and technology. Instructors may have to restructure their course differently to accommodate and facilitate the effectiveness of distance learning. A project-based engineering course, traditionally taught in a classroom settings using live mode at the College of Engineering and Computer Sciences at the University of Central Florida (UCF has been transformed to a distance course taught using distance modes. In this case, pedagogical transitions and adjustments are required, in particular for obtaining an optimal balance between the course material and the project work. Project collaboration in groups requires communication, which is possible with extensive utilization of new information and communication technology, such as virtual meetings. This paper discusses the course transition from live to distance modes and touches on some issues as they relate to the effectiveness of this methodology and the lessons learned from its application within different context. More specifically, this discussion includes the benefit of implementing project-based work in the domain of the distance learning courses.

Internet MEMS design tools based on component technology

Science.gov (United States)

Brueck, Rainer; Schumer, Christian

1999-03-01

The micro electromechanical systems (MEMS) industry in Europe is characterized by small and medium sized enterprises specialized on products to solve problems in specific domains like medicine, automotive sensor technology, etc. In this field of business the technology driven design approach known from micro electronics is not appropriate. Instead each design problem aims at its own, specific technology to be used for the solution. The variety of technologies at hand, like Si-surface, Si-bulk, LIGA, laser, precision engineering requires a huge set of different design tools to be available. No single SME can afford to hold licenses for all these tools. This calls for a new and flexible way of designing, implementing and distributing design software. The Internet provides a flexible manner of offering software access along with methodologies of flexible licensing e.g. on a pay-per-use basis. New communication technologies like ADSL, TV cable of satellites as carriers promise to offer a bandwidth sufficient even for interactive tools with graphical interfaces in the near future. INTERLIDO is an experimental tool suite for process specification and layout verification for lithography based MEMS technologies to be accessed via the Internet. The first version provides a Java implementation even including a graphical editor for process specification. Currently, a new version is brought into operation that is based on JavaBeans component technology. JavaBeans offers the possibility to realize independent interactive design assistants, like a design rule checking assistants, a process consistency checking assistants, a technology definition assistants, a graphical editor assistants, etc. that may reside distributed over the Internet, communicating via Internet protocols. Each potential user thus is able to configure his own dedicated version of a design tool set dedicated to the requirements of the current problem to be solved.

Applying Internet-based Technologies to Teaching Corporate Finance and Investments

Directory of Open Access Journals (Sweden)

Zhuoming “Joe” Peng, Ph.D.,

2006-07-01

Full Text Available Finance faculty are increasingly encouraged to use internet-based technologies in teaching. This paper examines students’ perceptions of finance faculty who use internet-based technologies and the impact on their learning experiences in undergraduate introductory corporate finance, investments, and MBA investments courses. The results suggest that offering all course materials online may enhance students’ learning experiences, however, the technologies may be best thought of as teaching tools. A better methodology for a finance course delivery may be that of in-classroom interactions between an instructor and the students while all the pertinent course materials are available online throughout the semester. There is a statistically significant difference between MBA (Master of Business Administration students and undergraduate business students in terms of their desire to use the internet for learning finance. Consistent with previous research, results indicate that it may not be common practice among faculty to use internet-based technologies, and that assistant professors tend to use technologies in teaching more often than their higher-ranked colleagues do.

Genomic content of Bordetella pertussis clinical isolates circulating in areas of intensive children vaccination.

Directory of Open Access Journals (Sweden)

Valérie Bouchez

Full Text Available BACKGROUND: The objective of the study was to analyse the evolution of Bordetella pertussis population and the influence of herd immunity in different areas of the world where newborns and infants are highly vaccinated. METHODOLOGY: The analysis was performed using DNA microarray on 15 isolates, PCR on 111 isolates as well as GS-FLX sequencing technology on 3 isolates and the B. pertussis reference strain, Tohama I. PRINCIPAL FINDINGS: Our analyses demonstrate that the current circulating isolates are continuing to lose genetic material as compared to isolates circulating during the pre-vaccine era whatever the area of the world considered. The lost genetic material does not seem to be important for virulence. Our study confirms that the use of whole cell vaccines has led to the control of isolates that were similar to vaccine strains. GS-FLX sequencing technology shows that current isolates did not acquire any additional material when compared with vaccine strains or with isolates of the pre-vaccine era and that the sequenced strain Tohama I is not representative of the isolates. Furthermore, this technology allowed us to observe that the number of Insertion Sequence elements contained in the genome of the isolates is temporally increasing or varying between isolates. CONCLUSIONS: B. pertussis adaptation to humans is still in progress by losing genetic material via Insertion Sequence elements. Furthermore, recent isolates did not acquire any additional material when compared with vaccine strains or with isolates of the pre-vaccine era. Herd immunity, following intensive vaccination of infants and children with whole cell vaccines, has controlled isolates similar to the vaccine strains without modifying significantly the virulence of the isolates. With the replacement of whole cell vaccines by subunit vaccines, containing only few bacterial antigens targeting the virulence of the bacterium, one could hypothesize the circulation of isolates

The Alliance Capability of Technology-Based Born Globals

DEFF Research Database (Denmark)

Oxtorp, Liliya Altshuler; Elg, Ulf

2015-01-01

A detailed investigation of the aspects comprising the alliance capability of technology-based born globals. Alliance capability is regarded as a set of organizational skills necessary from the decision to search for a partner for a technology collaboration, which may also involve a marketing...... and risks of collaborating with MNEs.Methodology: A longitudinal process study of a Danish technology born global with three embedded cases of its R&D and marketing alliances with Asian MNEs.Findings: The organisational skills comprising the alliance capability are defined to be internal and external...

Utilities/industries joint study on seismic isolation systems for LWR: Part I. Experimental and analytical studies on seismic isolation systems

International Nuclear Information System (INIS)

Kato, Muneaki; Sato, Shoji; Shimomura, Issei

1989-01-01

This paper describes a joint study program on seismic isolation systems for light-water reactors (LWRs) performed by ten electric power companies, three manufacturers, and five construction companies. The fundamental response characteristics of base-isolated structures and base-isolation devices are described. Applications of a base-isolation system to LWR buildings are given. Finally, three-dimensional shaking table experiments are described

Yeast Isolation for Bioethanol Production

Directory of Open Access Journals (Sweden)

EKA RURIANI

2012-09-01

Full Text Available We have isolated 12 yeast isolates from five different rotten fruits by using a yeast glucose chloramphenicol agar (YGCA medium supplemented with tetracycline. From pre-screening assay, four isolates exhibited higher substrate (glucose-xylose consumption efficiency in the reaction tube fermentation compared to Saccharomyces cerevisiae dan Saccharomyces ellipsoids as the reference strains. Based on the fermentation process in gooseneck flasks, we observed that two isolates (K and SB showed high fermentation efficiency both in sole glucose and mixed glucose-xylose substrate. Moreover, isolates K and SB produced relatively identical level of ethanol concentration compared to the reference strains. Isolates H and MP could only produce high levels of ethanol in glucose fermentation, while only half of that amount of ethanol was detected in glucose-xylose fermentation. Isolate K and SB were identified as Pichia kudriavzeevii (100% based on large sub unit (LSU ribosomal DNA D1/D2 region.

Promoting mental wellbeing among older people: technology-based interventions.

Science.gov (United States)

Forsman, Anna K; Nordmyr, Johanna; Matosevic, Tihana; Park, A-La; Wahlbeck, Kristian; McDaid, David

2017-08-30

This systematic review explored the effectiveness of technology-based interventions in promoting the mental health and wellbeing of people aged 65 and over. Data were collected as part of a wider review commissioned by the National Institute for Health and Care Excellence (NICE) in England on the effectiveness of different actions to promote the mental wellbeing and independence of older people. All studies identified through this review were subject to a detailed critical appraisal of quality, looking at internal and external validity. Twenty-one papers covering evaluations of technological interventions were identified. They examined the psychosocial effects of technologies for education, exposure to, and/or training to use, computers and the internet, telephone/internet communication and computer gaming. Few studies took the form of randomized controlled trials, with little comparability in outcome measures, resulting in an inconsistent evidence base with moderate strength and quality. However, three out of six studies with high or moderate quality ratings (all focused on computer/internet training) reported statistically significant positive effects on psychosocial outcomes, including increased life satisfaction and experienced social support, as well as reduced depression levels among intervention recipients. The review results highlight the need for more methodologically rigorous studies evaluating the effects of technology-based interventions on mental wellbeing. Well-performed technology-based interventions to promote various aspects of mental wellbeing, as identified in this review, can serve as best practice examples in this emerging field. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Phenotypic and molecular characterization of bacterial populations isolated from diesel-contaminated soil and treated by two bioremediation technologies

International Nuclear Information System (INIS)

Arrieta R, Olga M; Rivera R, Angela P; Rojano, Benjamin; Ruiz, Orlando; Correa, Margarita M; Cienfuegos Gallet, Astrid V; Arias, Lida; Cardona G, Santiago A

2012-01-01

In this study bioremediation is presented as an alternative for the recovery of contaminated ecosystems. In this work an experimental diesel spill on pasture land was remediated using two bioremediation technologies: natural attenuation, which is the natural capability of indigenous microorganisms to degrade a xenobiotic component in a determined time, and biostimulation, which consist in the acceleration of the degradation process through the stimulation of the metabolism of indigenous microorganisms by the addition of nutrients (P and N) to the media. Results of respirometry assays indicated that both treatments produced significant levels of hydrocarbon removal but the biostimulation treatment stranded out with 98.17% degradation. Seven bacterial isolates were obtained from these treatments which according to their molecular characterization and phylogenetic analysis belong to the genus: Enterobacter, Bacillus, Arthrobacter, Sanguibacter, Staphylococcus and Flavobacterium. All isolates were able to metabolize diesel as a carbon and energy source; for this reason and taking into account that for some of these microorganisms their role in bioremediation have not been extensively studied, it is recommended to continue with their evaluation to know their real potential for the solution of environmental problems.

Designing Personalization in Technology-Based Services

Science.gov (United States)

Lee, Min Kyung

2013-01-01

Personalization technology has the potential to optimize service for each person's unique needs and characteristics. One way to optimize service is to allow people to customize the service themselves; another is to proactively tailor services based on information provided by people or inferred from their past behaviors. These approaches function…

RNA isolation from bloodstains collected on FTA cards – application in clinical and forensic genetics

Directory of Open Access Journals (Sweden)

Katarzyna Skonieczna

2017-06-01

Full Text Available Aim of the study : In recent years, RNA analysis has been increasingly used in clinical and forensic genetics. Nevertheless, a major limitation of RNA-based applications is very low RNA stability in biological material, due to the RNAse activity. This highlights the need for improving the methods of RNA collection and storage. Technological approaches such as FTA Classic Cards (Whatman could provide a solution for the problem of RNA degradation. However, different methods of RNA isolation from FTA cards could have diverse effects on RNA quantity and quality. The purpose of this research was to analyze the utility of three different methods of RNA isolation from peripheral blood collected on FTA Classic Cards (Whatman. The study also aimed at assessing RNA stability in bloodstains deposited on FTA cards. Material and methods : The study was performed on peripheral bloodstains collected from 59 individuals on FTA Classic Cards (Whatman. RNA was isolated with High Pure RNA Isolation Kit (Roche Diagnostics, Universal RNA/miRNA Purification (EURx and TRIzol Reagent (Life Technologies. RNA was subjected to quantitative analysis followed by reverse transcription and Real – Time PCR reaction. Results : The study has shown that FTA Classic Cards (Whatman are useful tools for storing bloodstains at room temperature for RNA analysis. Moreover, the method of RNA extraction employing TRIzol Reagent (Life Technologies provides the highest efficiency and reproducibility for samples stored for no more than 2 years. Conclusions : The FTA cards are suitable for collecting and storing bloodstains for RNA analysis in clinical and forensic genetics.

Applications of lipid based formulation technologies in the delivery of biotechnology-based therapeutics.

Science.gov (United States)

du Plessis, Lissinda H; Marais, Etienne B; Mohammed, Faruq; Kotzé, Awie F

2014-01-01

In the last decades several new biotechnologically-based therapeutics have been developed due to progress in genetic engineering. A growing challenge facing pharmaceutical scientists is formulating these compounds into oral dosage forms with adequate bioavailability. An increasingly popular approach to formulate biotechnology-based therapeutics is the use of lipid based formulation technologies. This review highlights the importance of lipid based drug delivery systems in the formulation of oral biotechnology based therapeutics including peptides, proteins, DNA, siRNA and vaccines. The different production procedures used to achieve high encapsulation efficiencies of the bioactives are discussed, as well as the factors influencing the choice of excipient. Lipid based colloidal drug delivery systems including liposomes and solid lipid nanoparticles are reviewed with a focus on recent advances and updates. We further describe microemulsions and self-emulsifying drug delivery systems and recent findings on bioactive delivery. We conclude the review with a few examples on novel lipid based formulation technologies.

Technology-Based Healthcare for Nursing Education Within The Netherlands: Past, Present and Future.

Science.gov (United States)

Koster, Ybranda; van Houwelingen, Cornelis T M

2017-01-01

At the present time, nearly all Dutch nursing schools are searching for suitable ways to implement technology-based healthcare in their curriculum. Some Universities chose elective education, others a mandatory solution. Several studies were executed to determine competencies needed by nurses in order to work with technology-based healthcare. In 2016 a nationwide new curriculum for nurses has been published. Providing technology-based healthcare is included under the core competencies of this new curriculum. All baccalaureate nursing educational institutes must implement this new curriculum at the start of 2016 which will have a huge impact on the implementation of technology-based healthcare in the education programs. In the future, technology centers from Universities will collaborate and specialize, partner with technology companies and crossovers between information and communication technology and healthcare education will be expanded.

Facilitating Teamwork with Lean Six Sigma and Web-Based Technology

Science.gov (United States)

Krause, Tim

2009-01-01

In this article, the author outlines a variety of ways of defining, making explicit, and supporting effective team-based projects through the basic tenets of Lean Six Sigma and the use of Web-based technologies. A combination of Lean Six Sigma and a handful of project management technologies not only help in fostering the communication central to…

Teaching basic lung isolation skills on human anatomy simulator: attainment and retention of lung isolation skills.

Science.gov (United States)

Latif, Rana K; VanHorne, Edgar M; Kandadai, Sunitha Kanchi; Bautista, Alexander F; Neamtu, Aurel; Wadhwa, Anupama; Carter, Mary B; Ziegler, Craig H; Memon, Mohammed Faisal; Akça, Ozan

2016-01-20

Lung isolation skills, such as correct insertion of double lumen endobronchial tube and bronchial blocker, are essential in anesthesia training; however, how to teach novices these skills is underexplored. Our aims were to determine (1) if novices can be trained to a basic proficiency level of lung isolation skills, (2) whether video-didactic and simulation-based trainings are comparable in teaching lung isolation basic skills, and (3) whether novice learners' lung isolation skills decay over time without practice. First, five board certified anesthesiologist with experience of more than 100 successful lung isolations were tested on Human Airway Anatomy Simulator (HAAS) to establish Expert proficiency skill level. Thirty senior medical students, who were naive to bronchoscopy and lung isolation techniques (Novice) were randomized to video-didactic and simulation-based trainings to learn lung isolation skills. Before and after training, Novices' performances were scored for correct placement using pass/fail scoring and a 5-point Global Rating Scale (GRS); and time of insertion was recorded. Fourteen novices were retested 2 months later to assess skill decay. Experts' and novices' double lumen endobronchial tube and bronchial blocker passing rates showed similar success rates after training (P >0.99). There were no differences between the video-didactic and simulation-based methods. Novices' time of insertion decayed within 2 months without practice. Novices could be trained to basic skill proficiency level of lung isolation. Video-didactic and simulation-based methods we utilized were found equally successful in training novices for lung isolation skills. Acquired skills partially decayed without practice.

Risk-based systems analysis for emerging technologies: Applications of a technology risk assessment model to public decision making

International Nuclear Information System (INIS)

Quadrel, M.J.; Fowler, K.M.; Cameron, R.; Treat, R.J.; McCormack, W.D.; Cruse, J.

1995-01-01

The risk-based systems analysis model was designed to establish funding priorities among competing technologies for tank waste remediation. The model addresses a gap in the Department of Energy's (DOE's) ''toolkit'' for establishing funding priorities among emerging technologies by providing disciplined risk and cost assessments of candidate technologies within the context of a complete remediation system. The model is comprised of a risk and cost assessment and a decision interface. The former assesses the potential reductions in risk and cost offered by new technology relative to the baseline risk and cost of an entire system. The latter places this critical information in context of other values articulated by decision makers and stakeholders in the DOE system. The risk assessment portion of the model is demonstrated for two candidate technologies for tank waste retrieval (arm-based mechanical retrieval -- the ''long reach arm'') and subsurface barriers (close-coupled chemical barriers). Relative changes from the base case in cost and risk are presented for these two technologies to illustrate how the model works. The model and associated software build on previous work performed for DOE's Office of Technology Development and the former Underground Storage Tank Integrated Demonstration, and complement a decision making tool presented at Waste Management 1994 for integrating technical judgements and non-technical (stakeholder) values when making technology funding decisions

Magnetic Suspension Technology Workshop

International Nuclear Information System (INIS)

Keckler, C.R.; Groom, N.J.; Britcher, C.P.

1993-01-01

In order to identify the state of magnetic suspension technology in such areas as rotating systems, pointing of experiments or subsystems, payload isolation, and superconducting materials, a workshop on Magnetic Suspension Technology was held at the Langley Research Center in Hampton, Virginia, on 2-4 Feb. 1988. The workshop included five technical sessions in which a total of 24 papers were presented. The technical sessions covered the areas of pointing, isolation, and measurement, rotating systems, modeling and control, and superconductors. A list of attendees is provided. Separate abstracts have been prepared for articles from this report

Research on Network Defense Strategy Based on Honey Pot Technology

Science.gov (United States)

Hong, Jianchao; Hua, Ying

2018-03-01

As a new network security technology of active defense, The honeypot technology has become a very effective and practical method of decoy attackers. The thesis discusses the theory, structure, characteristic, design and implementation of Honeypot in detail. Aiming at the development of means of attack, put forward a kind of network defense technology based on honeypot technology, constructing a virtual Honeypot demonstrate the honeypot’s functions.

[New isolation methods and phylogenetic diversity of actinobacteria from hypersaline beach in Aksu].

Science.gov (United States)

Zhang, Yao; Xia, Zhanfeng; Cao, Xinbo; Li, Jun; Zhang, Lili

2013-08-04

We explored 4 new methods to improve the isolation of actinobacterial resources from high salt areas. Optimized media based on 4 new strategies were used for isolating actinobacteria from hypersaline beaches. Glycerin-arginine, trehalose-creatine, glycerol-asparticacid, mannitol-casein, casein-mannitol, mannitol-alanine, chitosan-asparagineand GAUZE' No. 1 were used as basic media. New isolation strategy includes 4 methods: ten-fold dilution culture, simulation of the original environment, actinobacterial culture guided by uncultured molecular technology detected, and reference of actinobacterial media for brackish marine environment. The 16S rRNA genes of the isolates were amplified with bacterial universal primers. The results of 16S rRNA gene sequences were compared with sequences obtained from GenBank databases. We constructed phylogenetic tree with the neighbor-joining method. No actinobacterial strains were isolated by 8 media of control group, while 403 strains were isolated by new strategies. The isolates by new methods were members of 14 genera (Streptomyces, Streptomonospora, Saccharomonospora, Plantactinospora, Nocardia, Amycolatopsis, Glycomyces, Micromonospora, Nocardiopsis, Isoptericola, Nonomuraea, Thermobifida, Actinopolyspora, Actinomadura) of 10 families in 8 suborders. The most abundant and diverse isolates were the two suborders of Streptomycineae (69.96%) and Streptosporangineaesuborder (9.68%) within the phylum Actinobacteria, including 9 potential novel species. New isolation methods significantly improved the actinobacterial culturability of hypersaline areas, and obtained many potential novel species, which provided a new and more effective way to isolate actinobacteria resources in hypersaline environments.

Seismic Response Analysis and Design of Structure with Base Isolation

International Nuclear Information System (INIS)

Rosko, Peter

2010-01-01

The paper reports the study on seismic response and energy distribution of a multi-story civil structure. The nonlinear analysis used the 2003 Bam earthquake acceleration record as the excitation input to the structural model. The displacement response was analyzed in time domain and in frequency domain. The displacement and its derivatives result energy components. The energy distribution in each story provides useful information for the structural upgrade with help of added devices. The objective is the structural displacement response minimization. The application of the structural seismic response research is presented in base-isolation example.

Technological properties of Lactobacillus plantarum strains isolated from grape must fermentation.

Science.gov (United States)

Berbegal, Carmen; Peña, Nuria; Russo, Pasquale; Grieco, Francesco; Pardo, Isabel; Ferrer, Sergi; Spano, Giuseppe; Capozzi, Vittorio

2016-08-01

Malolactic fermentation (MLF) is a secondary fermentation in wine that usually takes place during or at the end of alcoholic fermentation. Lactobacillus plantarum is able to conduct MLF (particularly under high pH conditions and in co-inoculation with yeasts), and some strains are commercially used as MLF starter cultures. Recent evidences suggest a further use of selected L. plantarum strains for the pre-alcoholic acidification of grape must. In this study, we have carried out an integrated (molecular, technological, and biotechnological) characterization of L. plantarum strains isolated from Apulian wines in order to combine the two protechnological features (MLF performances and must acidification aptitudes). Several parameters such as sugar, pH and ethanol tolerance, resistance to lyophilisation and behaviour in grape must were evaluated. Moreover, the expression of stress gene markers was investigated and was linked to the ability of L. plantarum strains to grow and perform MLF. Co-inoculation of Saccharomyces cerevisiae and L. plantarum in grape must improves the bacterial adaptation to harsh conditions of wine and reduced total fermentation time. For the first time, we applied a polyphasic approach for the characterization of L. plantarum in reason of the MLF performances. The proposed procedure can be generalized as a standard method for the selection of bacterial resources for the design of MLF starter cultures tailored for high pH must. Copyright © 2016 Elsevier Ltd. All rights reserved.

Exponential Reliability Coefficient based Reputation Mechanism for isolating selfish nodes in MANETs

Directory of Open Access Journals (Sweden)

J. Sengathir

2015-07-01

Full Text Available In mobile ad hoc networks, cooperation among active mobile nodes is considered to play a vital role in reliable transmission of data. But, the selfish mobile nodes present in an ad hoc environment refuse to forward neighbouring nodes’ packet for conserving its own energy. This intentional selfish behaviour drastically reduces the degree of cooperation maintained between the mobile nodes. Hence, a need arises for devising an effective mechanism which incorporates both energy efficiency and reputation into account for mitigating selfish behaviour in MANETs. In this paper, we propose an Exponential Reliability Coefficient based reputation Mechanism (ERCRM which isolates the selfish nodes from the routing path based on Exponential Reliability Coefficient (ExRC. This reliability coefficient manipulated through exponential failure rate based on moving average method highlights the most recent past behaviour of the mobile nodes for quantifying its genuineness. From the simulation results, it is evident that, the proposed ERCRM approach outperforms the existing Packet Conservation Monitoring Algorithm (PCMA and Spilt Half Reliability Coefficient based Mathematical Model (SHRCM in terms of performance evaluation metrics such as packet delivery ratio, throughput, total overhead and control overhead. Further, this ERCRM mechanism has a successful rate of 28% in isolating the selfish nodes from the routing path. Furthermore, it also aids in framing the exponential threshold point of detection as 0.4, where a maximum number of selfish nodes are identified when compared to the existing models available in the literature.

Medicinal Plants Based Products Tested on Pathogens Isolated from Mastitis Milk

Directory of Open Access Journals (Sweden)

Claudia Pașca

2017-09-01

Full Text Available Bovine mastitis a major disease that is commonly associated with bacterial infection. The common treatment is with antibiotics administered intramammary into infected quarters of the udder. The excessive use of antibiotics leads to multidrug resistance and associated risks for human health. In this context, the search for alternative drugs based on plants has become a priority in livestock medicine. These products have a low manufacturing cost and no reports of antimicrobial resistance to these have been documented. In this context, the main objective of this study was to determine the antimicrobial effect of extracts and products of several indigenous, or acclimatized plants on pathogens isolated from bovine mastitis. A total of eleven plant alcoholic extracts and eight plant-derived products were tested against 32 microorganisms isolated from milk. The obtained results have shown an inhibition of bacterial growth for all tested plants, with better results for Evernia prunastri, Artemisia absinthium, and Lavandula angustifolia. Moreover, E. prunastri, Populus nigra, and L. angustifolia presented small averages of minimum inhibitory and bactericidal concentrations. Among the plant-derived products, three out of eight have shown a strong anti-microbial effect comparable with the effect of florfenicol and enrofloxacin, and better than individual plant extracts possibly due to synergism. These results suggest an important anti-microbial effect of these products on pathogens isolated from bovine mastitis with a possible applicability in this disease.

Coupled geomechanical/hydrological modeling: an overview of basalt waste isolation project studies

International Nuclear Information System (INIS)

Baca, R.G.; Case, J.B.; Patricio, J.G.

1980-07-01

Basalt Waste Isolation Project investigations of the Columbia River basalts are multi-disciplinary in nature with a broad scope spanning such areas as geology, seismology, geochemistry, hydrology, rock mechanics, and many other disciplines as well. In this paper, an overview is presented which surveys recent work on numerical modeling of geomechanical and hydrological processes in a basalt rock environment. A major objective of the ongoing numerical modeling work is to establish a predictive technology base with which to: interpret the interrelationships between geomechanical behavior of rock media, the natural hydrologic phenomena, and repository conditions; evaluate the effectiveness of preconceptual repository designs and assist in the design of in situ field testing; and assess the waste isolation capability of candidate host rocks within the Columbia River basalts. To accomplish this objective, a systems approach has been adopted which is based on the use of digital simulation models

Concepts and Models Regarding the Behavior of Antiseismic Devices for the Base Isolation System

Directory of Open Access Journals (Sweden)

Polidor BRATU

2013-07-01

Full Text Available The paper presents the main antiseismic devices, as component elements of the base isolation systems, in such a manner that the functional and constructive parameters are correlated with the inertial and stiffness characteristics of the dynamic isolated building. Also, each device will be characterized through a rheological model, which conditions the eigenvalues and eigenvectors spectrum, as well as the dynamic response to an exterior excitation of a seismic nature. In this context, antiseismic devices defined and characterized by the European Standard EN 15129 will be presented. Based on the requirements formulated in the norm, the devices can be identified and their laws of evolution established and checked as follows: antiseismic devices with permanent rigid connection; antiseismic devices with rigid connections with respect to the instantaneous displacement and antiseismic devices dependent on the velocity and on the velocity variation in time.

Seismic response characteristics of full-size buildings with base isolation system

International Nuclear Information System (INIS)

Wang, C.Y.; Gvildys, J.

1991-01-01

This paper investigates the response characteristics of full-size reinforced concrete buildings via numerical simulations and actual observations. The test facility consists of two identical three-story buildings constructed side by side at Tohoku University in Sendai, Japan. Since the installation of high-damping isolation bearings in April 1989, data from over twenty earthquakes have been recorded. In this paper, three representative earthquake records, No. 2, No. 6, and No. 17 are used to study the detailed response characteristics. Numerical simulations are carried out with the system response program, SISEC. In general, good agreement has been found between numerical solutions and actual observations. The system is stiff enough to prevent the building displacement under minor earthquakes and wind loads, but is relatively soft for reducing the acceleration response during earthquakes with moderate and strong ground motion. Lessons learned in this effort are applicable to base isolation design of nuclear power plants. 7 refs., 16 figs., 3 tabs

Technological innovation capability in Malaysian-owned resource-based manufacturing companies: Early findings

Science.gov (United States)

Razali, Nur Fhathyhah; Mohd Suradi, Nur Riza; Ahmad Shahabuddin, Faridatul Azna; Ismail, Wan Rosmanira; Abidin, Norkisme Zainal; Ahmad, Nor Amalina; Mustafa, Zainol

2013-04-01

This study aims to identify the determinants of technological innovation capability of Malaysian-owned companies in the resources-based manufacturing, to identify the relationship between technological innovation capability (TIC) and technological innovation performance (TIP) for the resource-based manufacturing. Furthermore, this study also aims to identify innovation capability factors that need more emphasis and improvements from the respective authority. The scope of the study covers four industries which are petrochemical industries, pharmaceutical industries, palm oil-based industries and food processing industries which are located in the state of Selangor. Descriptive analysis, correlation analysis and performance capability analysis were used in this study. It was found that, technological innovation capabilities (TIC) for companies in the resource-based manufacturing are moderate. Factors such as policies capability, human resources capability and facilities capability have a positive relationship with the performance of technological innovation (TIP). These findings will help the government in making decisions and better implementation of policies to strengthen the competitiveness of the company, particularly in resource-based manufacturing.

Research on Upgrade Path to Technology Innovation of Resource-based SMEs in China

Science.gov (United States)

Jie, Xu

2017-08-01

Complexity, diversity and coordination are features of technology innovation of resource-based SMEs in China. This paper studies on the key factors of macro-environment, cooperation among enterprises and enterprise interior, which influence the upgrading of technology innovation of resource-based SMEs in China. This paper constructs integrated system of technology innovation to analyse the upgrade path to technology innovation of resource-based SMEs in China, so that enterprises would improve their technology innovation and get a new way to accomplish sustainable innovated development.

Neural network-based voltage regulator for an isolated asynchronous generator supplying three-phase four-wire loads

Energy Technology Data Exchange (ETDEWEB)

Singh, Bhim; Kasal, Gaurav Kumar [Department of Electrical Engineering, Indian Institute of Technology, Delhi, Hauz-Khas, New Delhi 110016 (India)

2008-06-15

This paper deals with a neural network-based solid state voltage controller for an isolated asynchronous generator (IAG) driven by constant speed prime mover like diesel engine, bio-gas or gasoline engine and supplying three-phase four-wire loads. The proposed control scheme uses an indirect current control and a fast adaptive linear element (adaline) based neural network reference current extractor, which extracts the real positive sequence current component without any phase shift. The neutral current of the source is also compensated by using three single-phase bridge configuration of IGBT (insulated gate bipolar junction transistor) based voltage source converter (VSC) along-with single-phase transformer having self-supported dc bus. The proposed controller provides the functions as a voltage regulator, a harmonic eliminator, a neutral current compensator, and a load balancer. The proposed isolated electrical system with its controller is modeled and simulated in MATLAB along with Simulink and PSB (Power System Block set) toolboxes. The simulated results are presented to demonstrate the capability of an isolated asynchronous generating system driven by a constant speed prime mover for feeding three-phase four-wire loads. (author)

Robotic Mobile System's Performance-Based MIMO-OFDM Technology

Directory of Open Access Journals (Sweden)

Omar Alani

2009-10-01

Full Text Available In this paper, a predistortion neural network (PDNN architecture has been imposed to the Sniffer Mobile Robot (SNFRbot that is based on spatial multiplexed wireless Orthogonal Frequency Division Multiplexing (OFDM transmission technology. This proposal is used to improve the system performance by combating one of the main drawbacks that is encountered by OFDM technology; Peak-to-Average Power Ratio (PAPR. Simulation results show that using PDNN resulted in better PAPR performance than the previously published work that is based on linear coding, such as Low Density Parity Check (LDPC codes and turbo encoding whether using flat fading channel or a Doppler spread channel.

Technology for the product and process data base

Science.gov (United States)

Barnes, R. D.

1984-01-01

The computerized product and process data base is increasingly recognized to be the cornerstone component of an overall system aimed at the integrated automation of the industrial processes of a given company or enterprise. The technology needed to support these more effective computer integrated design and manufacturing methods, especially the concept of 3-D computer-sensible product definitions rather than engineering drawings, is not fully available and rationalized. Progress is being made, however, in bridging this technology gap with concentration on the modeling of sophisticated information and data structures, high-performance interactive user interfaces and comprehensive tools for managing the resulting computerized product definition and process data base.

Risk-based systems analysis of emerging high-level waste tank remediation technologies. Volume 1: Executive summary

International Nuclear Information System (INIS)

Peters, B.B.; Cameron, R.J.; McCormack, W.D.

1994-08-01

This report describes a System Analysis Model developed under the US Department of Energy (DOE) Office of Technology Development (OTD) Underground Storage Tank-Integrated Demonstration (UST-ID) program to aid technology development funding decisions for radioactive tank waste remediation. Current technology development selection methods evaluate new technologies in isolation from other components of an overall tank waste remediation system. These methods do not show the relative effect of new technologies on tank remediation systems as a whole. Consequently, DOE may spend its resources on technologies that promise to improve a single function but have a small or possibly negative, impact on the overall system, or DOE may overlook a technology that does not address a high priority problem in the system but that does, if implemented, offer sufficient overall improvements. Systems engineering and detailed analyses often conducted under the National Environmental Policy Act (NEPA 1969) use a ''whole system'' approach but are costly, too time-consuming, and often not sufficiently focused to support the needs of the technology program decision-makers. An alternative approach is required to evaluate these systems impacts but still meet the budget and schedule needs of the technology program

Studying genetic diversity of whitefly B. tabaci Egyptian isolates in relation to some worldwide isolates

Directory of Open Access Journals (Sweden)

Inas Farouk Fahmy

2015-06-01

Full Text Available Bemisia tabaci (Gennadius (Hemiptera, Aleyrodidae is considered to be one of the most damaging pests in agriculture, causing severe losses in crops worldwide, affecting the tropical and subtropical regions. Random Amplified Polymorphic DNA-Polymerase Chain Reaction (RAPD-PCR was used to assess the genetic diversity between different isolates collected from different regions in Egypt compared with some other worldwide isolates of this insect pest. Out of 12 primers 8 primers from Operon technology have shown to differentiate between 13 collected B. tabaci samples from all over Egypt and some other samples collected from different countries with two other populations representing biotypes A and B collected from the US used for biotype demarcation. Using 13 insect samples, RAPD analysis has produced a total number of 72 markers; about 68 polymorphic markers were revealed. The total number of bands obtained for each primer ranged from 4 to 14 within an average of 9 bands per primer. Of the pair wise combination among fifteen populations Ismailia population showed the highest similarity index (0.947, while US biotype A scored the lowest similarity index (0.326. Two major clusters were formed from the UPGMA dendrogram, which was constructed based on Dice similarity coefficient. RAPD-PCR screening demarcated the whitefly population based on the host species and genetic biotypes. Two major clusters have been revealed as A and B with two other minor clusters A1, A2, and B1, B2. Most of the samples collected from Egypt were clustered together in a minor cluster named A1. A1 group is divided into two sub-groups. A1a comprises the populations from Beni-Sweif in Upper Egypt, Ismailia, Kalyobia, El-Fayoum, Tanta, Kafr El-Sheikh, Alexandria, and A1b comprises Spain and Sudan. Group A1a is clustered together based on their host which belongs to the Cucurbitaceae family while Alexandria was separated individually based on its host which is cauliflower. Through

Effects of Moat Wall Impact on the Seismic Response of Base Isolated Nuclear Power Plants

International Nuclear Information System (INIS)

Kim, Min Kyu; Kim, Jung Han; Mosqueda, Gilberto; Sarebanhab, Alireza

2015-01-01

The objectives of this study are to examine the effects of impact on the response of seismically isolated NPPs and identify characteristics of the isolation hardware and hard stop that minimize these effects. Considering variable distances to the hard stop and properties of the moat wall, the amplification in response is reported for acceleration and floor spectral accelerations at different points along the height of a NPP containment structure. Base isolation can be an effective strategy to protect critical facilities such as Nuclear Power Plants (NPPs) from the damaging effects of horizontal earthquake ground shaking. To be effective in reducing accelerations and deformations of the structure above, the seismic isolation bearings can be subjected to large displacements. In the case of an extreme earthquake, bearing displacements need to be limited by a hard stop in order to prevent failure of the bearings. Impact to the hard stop, which is often the moat wall at the basement level, is also of significant concern due to the potential for increased transfer of forces and amplification in response of the structural system, piping and other contents. However, the consequences of impact or factors important to mitigate its effects are not very well understood. The main findings of this study are related to modeling of NPP with moat wall in OpenSees and LSDyna as well as observations resulting from the parametric study of the performance of the NPP under different intensity levels of seismic excitations for different properties of the moat wall and bearings. • Variation in the isolator properties should be considered when examining seismic pounding. For BDBE even, 58.5 % cases result to the impact for lower bound properties while this value was 5.5 % for upper bound properties. Since the impact results are dependent to the assumed bearing properties, a better range of properties can be obtained from experimental testing of the bearing under large shear strains. �

Technological advances in precision medicine and drug development.

Science.gov (United States)

Maggi, Elaine; Patterson, Nicole E; Montagna, Cristina

New technologies are rapidly becoming available to expand the arsenal of tools accessible for precision medicine and to support the development of new therapeutics. Advances in liquid biopsies, which analyze cells, DNA, RNA, proteins, or vesicles isolated from the blood, have gained particular interest for their uses in acquiring information reflecting the biology of tumors and metastatic tissues. Through advancements in DNA sequencing that have merged unprecedented accuracy with affordable cost, personalized treatments based on genetic variations are becoming a real possibility. Extraordinary progress has been achieved in the development of biological therapies aimed to even further advance personalized treatments. We provide a summary of current and future applications of blood based liquid biopsies and how new technologies are utilized for the development of biological therapeutic treatments. We discuss current and future sequencing methods with an emphasis on how technological advances will support the progress in the field of precision medicine.

SPI Conformance Gel Applications in Geothermal Zonal Isolation

Energy Technology Data Exchange (ETDEWEB)

Burns, Lyle [Clean Tech Innovations, Bartlesville, OK (United States)

2017-08-08

Zonal isolation in geothermal injection and producing wells is important while drilling the wells when highly fractured geothermal zones are encountered and there is a need to keep the fluids from interfering with the drilling operation. Department of Energy’s (DOE) Energy Efficiency and Renewable Energy (EERE) objectives are to advance technologies to make it more cost effective to develop, produce, and monitor geothermal reservoirs and produce geothermal energy. Thus, zonal isolation is critical to well cost, reservoir evaluation and operations. Traditional cementing off of the lost circulation or thief zones during drilling is often done to stem the drilling mud losses. This is an expensive and generally unsuccessful technique losing the potential of the remaining fracture system. Selective placement of strong SPI gels into only the offending fractures can maintain and even improve operational efficiency and resource life. The SPI gel system is a unique silicate based gel system that offers a promising solution to thief zones and conformance problems with water and CO2 floods and potentially geothermal operations. This gel system remains a low viscosity fluid until an initiator (either internal such as an additive or external such as CO2) triggers gelation. This is a clear improvement over current mechanical methods of using packers, plugs, liners and cementing technologies that often severely damage the highly fractured area that is isolated. In the SPI gels, the initiator sets up the fluid into a water-like (not a precipitate) gel and when the isolated zone needs to be reopened, the SPI gel may be removed with an alkaline solution without formation damage occurring. In addition, the SPI gel in commercial quantities is expected to be less expensive than competing mechanical systems and has unique deep placement possibilities. This project seeks to improve upon the SPI gel integrity by modifying the various components to impart temperature stability for use in

A Survey of Technologies Supporting Virtual Project Based Learning

DEFF Research Database (Denmark)

Dirckinck-Holmfeld, Lone

2002-01-01

This paper describes a survey of technologies and to what extent they support virtual project based learning. The paper argues that a survey of learning technologies should be related to concrete learning tasks and processes. Problem oriented project pedagogy (POPP) is discussed, and a framework...... for evaluation is proposed where negotiation of meaning, coordination and resource management are identified as the key concepts in virtual project based learning. Three e-learning systems are selected for the survey, Virtual-U, Lotus Learningspace and Lotus Quickplace, as each system offers different strategies...... for e-learning. The paper concludes that virtual project based learning may benefit from facilities of all these systems....

Dissipativity analysis of the base isolated benchmark structure with magnetorheological fluid dampers

International Nuclear Information System (INIS)

Erkus, Baris; Johnson, Erik A

2011-01-01

This paper investigates the dissipativity and performance characteristics of the semiactive control of the base isolated benchmark structure with magnetorheological (MR) fluid dampers. Previously, the authors introduced the concepts of dissipativity and dissipativity indices in the semiactive control of structures with smart dampers and studied the dissipativity characteristics of simple structures with idealized dampers. To investigate the effects of semiactive controller dissipativity characteristics on the overall performance of the base isolated benchmark building, a clipped optimal control strategy with a linear quadratic Gaussian (LQG) controller and a 20 ton MR fluid damper model is used. A cumulative index is proposed for quantifying the overall dissipativity of a control system with multiple control devices. Two control designs with different dissipativity and performance characteristics are considered as the primary controller in clipped optimal control. Numerical simulations reveal that the dissipativity indices can be classified into two groups that exhibit distinct patterns. It is shown that the dissipativity indices identify primary controllers that are more suitable for application with MR dampers and provide useful information in the semiactive design process that complements other performance indices. The computational efficiency of the proposed dissipativity indices is verified by comparing computation times

Evidence-based medicine in rapidly changing technologies

DEFF Research Database (Denmark)

Schroeder, Torben Veith

2008-01-01

Evidence-based medicine (EBM) is not a randomised controlled trial (RCT), but EBM seeks to apply evidence gained from scientific methods - which could be RCT - to daily medical practice. Any surgical treatment reflects a certain development technically as well as skills based. The procedure may....... Special considerations should be given in rapidly developing fields. If started too early the resulting comparison will likely turn out to be irrelevant because the new technology is not fully developed, not mastered or the device may have undergone major modifications rendering the results obsolete....... On the other hand, if started too late there is a chance that data may be lost because the technology has already been introduced into the daily clinics and physicians may be unwilling to recruit patients. Or the opposite, that the technique may have been rejected without a proper trial. In this situation...

Energy conservation technologies based on thermodynamic principles

Energy Technology Data Exchange (ETDEWEB)

Hirata, Masaru [Shibaura Institute of Technology of Technology, Tokyo (Japan)

1996-12-31

In order to reduce CO{sub 2} emission to prevent global warming, the most promising way for electric generation in the Northeast Asia is to introduce cogeneration and {open_quotes}repowering{close_quotes} technologies based on high temperature gas turbines fueled by natural gas. Especially the old type coal burning boiler-steam turbine plants should be retrofit by introducing gas turbines to become highly efficient combined cycle. Same technologies should be applied to the old garbage incineration plants and/or even to the nuclear power plants. The exhaust heat or steam should become much increased and it should be utilized as the process heat for industries or heat supply as the distinct heating or cooling for residential area. This paper introduces a brief survey of these new technologies.

Model based Fault Detection and Isolation for Driving Motors of a Ground Vehicle

Directory of Open Access Journals (Sweden)

Young-Joon Kim

2016-04-01

Full Text Available This paper proposes model based current sensor and position sensor fault detection and isolation algorithm for driving motor of In-wheel independent drive electric vehicle. From low level perspective, fault diagnosis conducted and analyzed to enhance robustness and stability. Composing state equation of interior permanent magnet synchronous motor (IPMSM, current sensor fault and position sensor fault diagnosed with parity equation. Validation and usefulness of algorithm confirmed based on IPMSM fault occurrence simulation data.

Design based action research in the world of robot technology and learning

DEFF Research Database (Denmark)

Majgaard, Gunver

2010-01-01

Why is design based action research method important in the world of robot technology and learning? The article explores how action research and interaction-driven design can be used in development of educational robot technological tools. The actual case is the development of “Fraction Battle......” which is about learning fractions in primary school. The technology is based on robot technology. An outdoor digital playground is taken into to the classroom and then redesigned. The article argues for interaction design takes precedence to technology or goal driven design for development...... of educational tools....

Promoting the Use of Online Social Technology as a Case-Based Learning Tool

Science.gov (United States)

Ractham, Peter; Chen, Charlie

2013-01-01

Social technology is proliferating and influencing different aspects of society. However, very few studies have examined the use of such a technology for a case-based learning pedagogy. This preliminary study investigates the use of social technology as a case-based learning tool to improve the effectiveness of case-based learning in the…

Research Technology (ASTP) Rocket Based Combined Cycle (RBCC) Engine

Science.gov (United States)

2004-01-01

Pictured is an artist's concept of the Rocket Based Combined Cycle (RBCC) launch. The RBCC's overall objective is to provide a technology test bed to investigate critical technologies associated with opperational usage of these engines. The program will focus on near term technologies that can be leveraged to ultimately serve as the near term basis for Two Stage to Orbit (TSTO) air breathing propulsions systems and ultimately a Single Stage To Orbit (SSTO) air breathing propulsion system.

THE DEVELOPMENT OF COAL-BASED TECHNOLOGIES FOR DEPARTMENT OF DEFENSE FACILITIES

Energy Technology Data Exchange (ETDEWEB)

Bruce G. Miller; Sharon Falcone Miller; Sarma V. Pisupati; Chunshan Song; Ronald S. Wasco; Ronald T. Wincek; Xiaochun Xu; Alan W. Scaroni; Richard Hogg; Subhash Chander; M. Thaddeus Ityokumbul; Mark S. Klima; Peter T. Luckie; Adam Rose; Richard L. Gordon; Jeffrey Lazo; A. Michael Schaal

2004-01-30

The third phase of a three-phase project investigating the development of coal-based technologies for US Department of Defense (DOD) facilities was completed. The objectives of the project were to: decrease DOD's dependence on foreign oil and increase its use of coal; promote public and private sector deployment of technologies for utilizing coal-based fuels in oil-designed combustion equipment; and provide a continuing environment for research and development of coal-based fuel technologies for small-scale applications at a time when market conditions in the US are not favorable for the introduction of coal-fired equipment in the commercial and industrial capacity ranges. The Phase III activities were focused on evaluating deeply-cleaned coals as fuels for industrial boilers and investigating emissions control strategies for providing ultra-low emissions when firing coal-based fuels. This was addressed by performing coal beneficiation and preparation studies, and bench- to demonstration-scale emissions reduction studies. In addition, economic studies were conducted focused on determining cost and market penetration, selection of incentives, and regional economic impacts of coal-based technologies.

Collaborative Project-Based Learning: An Integrative Science and Technological Education Project

Science.gov (United States)

Baser, Derya; Ozden, M. Yasar; Karaarslan, Hasan

2017-01-01

Background: Blending collaborative learning and project-based learning (PBL) based on Wolff (2003) design categories, students interacted in a learning environment where they developed their technology integration practices as well as their technological and collaborative skills. Purpose: The study aims to understand how seventh grade students…

Ground-based Nuclear Detonation Detection (GNDD) Technology Roadmap

International Nuclear Information System (INIS)

Casey, Leslie A.

2014-01-01

This GNDD Technology Roadmap is intended to provide guidance to potential researchers and help management define research priorities to achieve technology advancements for ground-based nuclear explosion monitoring science being pursued by the Ground-based Nuclear Detonation Detection (GNDD) Team within the Office of Nuclear Detonation Detection in the National Nuclear Security Administration (NNSA) of the U.S. Department of Energy (DOE). Four science-based elements were selected to encompass the entire scope of nuclear monitoring research and development (R&D) necessary to facilitate breakthrough scientific results, as well as deliver impactful products. Promising future R&D is delineated including dual use associated with the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Important research themes as well as associated metrics are identified along with a progression of accomplishments, represented by a selected bibliography, that are precursors to major improvements to nuclear explosion monitoring.

Ground-based Nuclear Detonation Detection (GNDD) Technology Roadmap

Energy Technology Data Exchange (ETDEWEB)

Casey, Leslie A.

2014-01-13

This GNDD Technology Roadmap is intended to provide guidance to potential researchers and help management define research priorities to achieve technology advancements for ground-based nuclear explosion monitoring science being pursued by the Ground-based Nuclear Detonation Detection (GNDD) Team within the Office of Nuclear Detonation Detection in the National Nuclear Security Administration (NNSA) of the U.S. Department of Energy (DOE). Four science-based elements were selected to encompass the entire scope of nuclear monitoring research and development (R&D) necessary to facilitate breakthrough scientific results, as well as deliver impactful products. Promising future R&D is delineated including dual use associated with the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Important research themes as well as associated metrics are identified along with a progression of accomplishments, represented by a selected bibliography, that are precursors to major improvements to nuclear explosion monitoring.

Species-Level Discrimination of Psychrotrophic Pathogenic and Spoilage Gram-Negative Raw Milk Isolates Using a Combined MALDI-TOF MS Proteomics-Bioinformatics-based Approach.

Science.gov (United States)

Vithanage, Nuwan R; Bhongir, Jeevana; Jadhav, Snehal R; Ranadheera, Chaminda S; Palombo, Enzo A; Yeager, Thomas R; Datta, Nivedita

2017-06-02

Identification of psychrotrophic pathogenic and spoilage Gram-negative bacteria using rapid and reliable techniques is important in commercial milk processing, as these bacteria can produce heat-resistant proteases and act as postprocessing contaminants in pasteurized milk. Matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF MS) is a proven technology for identification of bacteria in food, however, may require optimization for identification of pathogenic and spoilage bacteria in milk and dairy products. The current study evaluated the effects of various culture conditions and sample preparation methods on assigning of raw milk isolates to the species level by MALDI-TOF MS. The results indicated that culture media, incubation conditions (temperature and time), and sample preparation significantly affected the identification rates of bacteria to the species level. Nevertheless, the development of spectral libraries of isolates grown on different media using a web tool for hierarchical clustering of peptide mass spectra (SPECLUST) followed by a ribosomal protein based bioinformatics approach significantly enhanced the assigning of bacteria, with at least one unique candidate biomarker peak identified for each species. Phyloproteomic relationships based on spectral profiles were compared to phylogenetic analysis using 16S rRNA gene sequences and demonstrated similar clustering patterns with significant discriminatory power. Thus, with appropriate optimization, MALDI-TOF MS is a valuable tool for species-level discrimination of pathogenic and milk spoilage bacteria.

Structural Concept and Analysis of a 17-Story Multifunctional Residential Complex with and without Seismic Isolation System

International Nuclear Information System (INIS)

Melkumyan, Mikayel; Gevorgyan, Emma

2008-01-01

In recent years seismic isolation technologies in Armenia were extensively applied in construction of multistory buildings. These are 10-17-story residential complexes with parking floors and with floors envisaged for offices, shopping centers, fitness clubs, etc. Also there is a 20-story business centre designed in 2006, which is currently under construction. All mentioned complexes are briefly described in the paper, which is, however, mainly dedicated to the 17-story residential complex designed in 2007. The structural concept, including the new approach on installation of seismic isolation rubber bearings in this building, is described and detailed results of the earthquake response analysis for two cases, i.e. when the building is base isolated and when it has a fixed base, are given. Several time histories were used in the analysis and for both cases the building was analyzed also according to the requirements of the Armenian Seismic Code. Comparison of the obtained results indicates the high effectiveness of the proposed structural concept of isolation system and the need for further improvement of Seismic Code provisions regarding the values of the reduction factors

Using Shadow Page Cache to Improve Isolated Drivers Performance

Directory of Open Access Journals (Sweden)

Hao Zheng

2015-01-01

Full Text Available With the advantage of the reusability property of the virtualization technology, users can reuse various types and versions of existing operating systems and drivers in a virtual machine, so as to customize their application environment. In order to prevent users’ virtualization environments being impacted by driver faults in virtual machine, Chariot examines the correctness of driver’s write operations by the method of combining a driver’s write operation capture and a driver’s private access control table. However, this method needs to keep the write permission of shadow page table as read-only, so as to capture isolated driver’s write operations through page faults, which adversely affect the performance of the driver. Based on delaying setting frequently used shadow pages’ write permissions to read-only, this paper proposes an algorithm using shadow page cache to improve the performance of isolated drivers and carefully study the relationship between the performance of drivers and the size of shadow page cache. Experimental results show that, through the shadow page cache, the performance of isolated drivers can be greatly improved without impacting Chariot’s reliability too much.

A network identity authentication system based on Fingerprint identification technology

Science.gov (United States)

Xia, Hong-Bin; Xu, Wen-Bo; Liu, Yuan

2005-10-01

Fingerprint verification is one of the most reliable personal identification methods. However, most of the automatic fingerprint identification system (AFIS) is not run via Internet/Intranet environment to meet today's increasing Electric commerce requirements. This paper describes the design and implementation of the archetype system of identity authentication based on fingerprint biometrics technology, and the system can run via Internet environment. And in our system the COM and ASP technology are used to integrate Fingerprint technology with Web database technology, The Fingerprint image preprocessing algorithms are programmed into COM, which deployed on the internet information server. The system's design and structure are proposed, and the key points are discussed. The prototype system of identity authentication based on Fingerprint have been successfully tested and evaluated on our university's distant education applications in an internet environment.

Experimental investigation of torsional vibration isolation using Magneto Rheological Elastomer

Directory of Open Access Journals (Sweden)

Praveen Shenoy K

2018-01-01

Full Text Available Rotating systems suffer from lateral and torsional vibrations which have detrimental effect on the roto-dynamic performance. Many available technologies such as vibration isolators and vibration absorbers deal with the torsional vibrations to a certain extent, however passive isolators and absorbers find less application when the input conditions are dynamic. The present work discusses use of a smart material called as Magneto Rheological Elastomer (MRE, whose properties can be changed based on magnetic field input, as a potential isolator for torsional vibrations under dynamic loading conditions. Carbonyl Iron Particles (CIP of average size 5 μm were mixed with RTV Silicone rubber to form the MRE. The effect of magnetic field on the system parameters was comprehended under impulse loading conditions using a custom built in-house system. Series arrangement of accelerometers were used to differentiate between the torsional and the bending modes of vibration of the system. Impact hammer tests were carried out on the torsional system to study its response, in the presence and absence of magnetic field. The tests revealed a shift in torsional frequency in the presence of magnetic field which elucidates the ability of MRE to work as a potential vibration isolator for torsional systems.

The technology vicinity: a location based view on technology

NARCIS (Netherlands)

Steenhuis, H.J.; de Bruijn, E.J.; Kocaoglu, D.F.; Anderson, T.R.

2001-01-01

The issue of technology transfer has been viewed from many different perspectives. In this case the focus is on the process of (production) technology transfer. One of the difficulties in studying international technology transfer is the definition of technology. The many technology definitions that

Comparative Research on Characteristics of the Isolation Systems with Dry Friction Damping and with Vicious Damping under Base Excitation

Science.gov (United States)

Hou, Junfang; jing, Min; Zhang, Weihua; Lu, Yahui; He, Haiwen

2017-12-01

As for the isolation problem of electronic equipments on vehicle, the vibration response characteristics of dry friction damping isolation system under base displacement excitation was analyzed in theory by harmonic balance method, and the displacement response was compared between the isolation systems with dry friction damping and vicious damping separately. The results show that the isolation system with small dry friction damping can’t meet the demands of displacement reduction close to the natural frequency, and it can realize full-frequency vibration isolation by improving dry friction damping when the lock frequency passes beyond the resonance frequency band. The results imply that the damping mechanism of dry friction isolator can’t be described only by dry friction damping, and the composite damping with dry friction and vicious damping is more appropriate.

Seismic isolation in New Zealand

International Nuclear Information System (INIS)

Skinner, R.I.; Robinson, W.H.; McVerry, G.H.

1989-01-01

Bridges, buildings, and industrial equipment can be given increased protection from earthquake damage by limiting the earthquake attack through seismic isolation. A broad summary of the seismic responses of base-isolated structures is of considerable assistance for their preliminary design. Seismic isolation as already used in New Zealand consists of a flexible base or support combined with some form of energy-dissipating device, usually involving the hysteretic working of steel or lead. This paper presents examples of the New Zealand experience, where seismic isolation has been used for 42 bridges, 3 buildings, a tall chimney, and high-voltage capacitor banks. Additional seismic response factors, which may be important for nuclear power plants, are also discussed briefly

A complex network based model for detecting isolated communities in water distribution networks

Science.gov (United States)

Sheng, Nan; Jia, Youwei; Xu, Zhao; Ho, Siu-Lau; Wai Kan, Chi

2013-12-01

Water distribution network (WDN) is a typical real-world complex network of major infrastructure that plays an important role in human's daily life. In this paper, we explore the formation of isolated communities in WDN based on complex network theory. A graph-algebraic model is proposed to effectively detect the potential communities due to pipeline failures. This model can properly illustrate the connectivity and evolution of WDN during different stages of contingency events, and identify the emerging isolated communities through spectral analysis on Laplacian matrix. A case study on a practical urban WDN in China is conducted, and the consistency between the simulation results and the historical data are reported to showcase the feasibility and effectiveness of the proposed model.

The technology vicinity: a location based view on technology

OpenAIRE

Steenhuis, H.J.; de Bruijn, E.J.; Kocaoglu, D.F.; Anderson, T.R.

2001-01-01

The issue of technology transfer has been viewed from many different perspectives. In this case the focus is on the process of (production) technology transfer. One of the difficulties in studying international technology transfer is the definition of technology. The many technology definitions that exist are either too ‘loosely’ formulated or they require thorough expert knowledge. This results in difficulties with measuring technology and comparing different studies meaningfully. This study...

ACCESSING FEDERAL DATA BASES FOR CONTAMINATED SITE CLEAN-UP TECHNOLOGIES

Science.gov (United States)

The Federal Remediation Technologies Roundtable (Roundtable) eveloped this publication to provide information on accessing Federal data bases that contain data on innovative remediation technologies. The Roundtable includes representatives from the Department of Defense (DoD), En...

Didactics, Technology, and Organisation of Project Based Distance Education

DEFF Research Database (Denmark)

Knudsen, Morten Haack; Borch, Ole M.; Helbo, Jan

2005-01-01

The didactics, technology, and organization of an ICT supported distance engineering Master education are described. A systematic monitoring and evaluation of the basis year has given useful experience, subsequently used for adjustments and improvements. A successful on-campus project organized...... as asynchronous, which is possible with extensive utilization of new information and communication technology. Virtual meetings are conducted with text, sound and video based communication. Also the organization requires technology. A new learning management system, specifically designed to the didactic form...

Integration of problem-based learning and innovative technology into a self-care course.

Science.gov (United States)

McFalls, Marsha

2013-08-12

To assess the integration of problem-based learning and technology into a self-care course. Problem-based learning (PBL) activities were developed and implemented in place of lectures in a self-care course. Students used technology, such as computer-generated virtual patients and iPads, during the PBL sessions. Students' scores on post-case quizzes were higher than on pre-case quizzes used to assess baseline knowledge. Student satisfaction with problem-based learning and the use of technology in the course remained consistent throughout the semester. Integrating problem-based learning and technology into a self-care course enabled students to become active learners.

Rockburst Disaster Prediction of Isolated Coal Pillar by Electromagnetic Radiation Based on Frictional Effect

Science.gov (United States)

Zhao, Tongbin; Yin, Yanchun; Xiao, Fukun; Tan, Yunliang; Zou, Jianchao

2014-01-01

Based on the understanding that charges generated during coal cracking are due to coal particle friction, a microstructure model was developed by considering four different variation laws of friction coefficient. Firstly, the frictional energy release of coal sample during uniaxial compressive tests was investigated and discussed. Then electromagnetic radiation method was used to predict the potential rockburst disaster in isolated coal pillar mining face, Muchengjian Colliery. The results indicate that the friction coefficient of coal particles decreases linearly with the increase of axial loading force. In predicting the strain-type rockburst, the high stress state of coal must be closely monitored. Field monitoring shows that electromagnetic radiation signal became abnormal before the occurrence of rockburst during isolated coal pillar mining. Furthermore, rockburst tends to occur at the early and ending stages of isolated coal pillar extraction. Mine-site investigation shows the occurrence zone of rockburst is consistent with the prediction, proving the reliability of the electromagnetic radiation method to predict strain-type rockburst disaster. PMID:25054186

Rockburst Disaster Prediction of Isolated Coal Pillar by Electromagnetic Radiation Based on Frictional Effect

Directory of Open Access Journals (Sweden)

Tongbin Zhao

2014-01-01

Full Text Available Based on the understanding that charges generated during coal cracking are due to coal particle friction, a microstructure model was developed by considering four different variation laws of friction coefficient. Firstly, the frictional energy release of coal sample during uniaxial compressive tests was investigated and discussed. Then electromagnetic radiation method was used to predict the potential rockburst disaster in isolated coal pillar mining face, Muchengjian Colliery. The results indicate that the friction coefficient of coal particles decreases linearly with the increase of axial loading force. In predicting the strain-type rockburst, the high stress state of coal must be closely monitored. Field monitoring shows that electromagnetic radiation signal became abnormal before the occurrence of rockburst during isolated coal pillar mining. Furthermore, rockburst tends to occur at the early and ending stages of isolated coal pillar extraction. Mine-site investigation shows the occurrence zone of rockburst is consistent with the prediction, proving the reliability of the electromagnetic radiation method to predict strain-type rockburst disaster.

Low cost friction seismic base-isolation of residential new masonry buildings in developing countries: A small masonry house case study

Science.gov (United States)

Habieb, A. B.; Milani, G.; Tavio, T.; Milani, F.

2017-07-01

A Finite element model was established to examine performance of a low-cost friction base-isolation system in reducing seismic vulnerability of rural buildings. This study adopts an experimental investigation of the isolation system which was conducted in India. Four friction isolation interfaces, namely, marble-marble, marble-high-density polyethylene, marble-rubber sheet, and marble-geosynthetic were involved. Those interfaces differ in static and dynamic friction coefficient obtained through previous research. The FE model was performed based on a macroscopic approach and the masonry wall is assumed as an isotropic element. In order to observe structural response of the masonry house, elastic and plastic parameters of the brick wall were studied. Concrete damage plasticity (CDP) model was adopted to determine non-linear behavior of the brick wall. The results of FE model shows that involving these friction isolation systems could much decrease response acceleration at roof level. It was found that systems with marble-marble and marble-geosynthetic interfaces reduce the roof acceleration up to 50% comparing to the system without isolation. Another interesting result is there was no damage appearing in systems with friction isolation during the test. Meanwhile a severe failure was clearly visible for a system without isolation.

Sensitive detection of novel Indian isolate of BTV 21 using ns1 gene based real-time PCR assay

Directory of Open Access Journals (Sweden)

Gaya Prasad

2013-06-01

Full Text Available Aim: The study was conducted to develop ns1 gene based sensitive real-time RT-PCR assay for diagnosis of India isolates of bluetongue virus (BTV. Materials and Methods: The BTV serotype 21 isolate (KMNO7 was isolated from Andhra Pradesh and propagated in BHK-21 cell line in our laboratory. The Nucleic acid (dsRNA of virus was extracted using Trizol method and cDNA was prepared using a standard protocol. The cDNA was allowed to ns1 gene based group specific PCR to confirm the isolate as BTV. The viral RNA was diluted 10 folds and the detection limit of ns1 gene based RT-PCR was determined. Finally the tenfold diluted viral RNA was subjected to real-time RT-PCR using ns1 gene primer and Taq man probe to standardized the reaction and determine the detection limit. Results: The ns1 gene based group specific PCR showed a single 366bp amplicon in agarose gel electrophoresis confirmed the sample as BTV. The ns1 gene RT-PCR using tenfold diluted viral RNA showed the detection limit of 70.0 fg in 1%agarose gel electrophoresis. The ns1 gene based real time RT-PCR was successfully standardized and the detection limit was found to be 7.0 fg. Conclusion: The ns1 gene based real-time RT-PCR was successfully standardized and it was found to be 10 times more sensitive than conventional RT-PCR. Key words: bluetongue, BTV21, RT-PCR, Real time RT-PCR, ns1 gene [Vet World 2013; 6(8.000: 554-557

The Beijing ISOL initial conceptual design report

International Nuclear Information System (INIS)

Cui, Baoqun; Gao, Yuan; Ge, Yucheng; Guo, Zhiyu; Li, Zhihong; Liu, Weiping; Peng, Shixiang; Peng, Zhaohua; Wang, Zhi; Yan, Sha; Ye, Yanlin; Zeng, Sheng; Zhang, Guohui; Zhu, Feng

2013-01-01

Highlights: • Peking University and China Institute of Atomic Energy are proposing to construct a facility called “Beijing ISOL”. • Beijing ISOL is aimed at both basic science and application goals. • Beijing ISOL is the double driver system, namely reactor driving (RD) and intense deuteron-beam driving (IDD). • Multi-beam, multi-energy and multi-terminal will be used to meet the users’ requirements. -- Abstract: Peking University (PKU) and China Institute of Atomic Energy (CIAE) are jointly proposing to construct a large science facility, temporarily called “Beijing ISOL”. This facility aims at both basic science and application goals, and is based on the double driver system, namely reactor driving and intense deuteron-beam driving. On the basic science side, the radioactive ion beams produced from the isotope separation online (ISOL) device will be used to study the new physics and technologies at the limit of nuclear stability. On the other side regarding to the applications, the facility will be devoted to material research for the nuclear energy system by using typically the intense neutron and ion beams. In the whole process of design, construction and operation, an opening policy will be pursued, and the domestic and international cooperation will be emphasized. Through this project, a joint research and education mode will be established

Isolation and polymerase chain reaction-based identification of Riemerella anatipestifer from ducks in Kerala, India

Directory of Open Access Journals (Sweden)

Manju Soman

2014-10-01

Full Text Available Aim: The aim was to isolate and characterize Riemerella anatipestifer organisms from disease outbreaks in ducks in Kerala. Materials and Methods: Ducklings, suspected of Riemerella infection, were sacrificed and subjected to post-mortem examination. Heart blood smears and impression smears from liver and spleen were examined for the presence of pathogenic organisms. Heart blood, lung, liver, and spleen collected aseptically from the birds were subjected to isolation trials in brain heart infusion agar and 10% bovine blood agar. The isolates were characterized based on morphology, cultural characteristics and biochemical tests, and their identity were confirmed by polymerase chain reaction (PCR and the PCR amplified DNA was sequenced. The antibiotic sensitivity testing of the isolates were carried out using six antibiotics viz ciprofloxacin, chloramphenicol, enrofloxacin, amoxycillin, cotrimoxazole, and gentamicin. Results: Colonies suggestive of Riemerella organisms could be isolated on blood agar. Biochemical characterization and PCR confirmed the identity of isolates as R. anatipestifer. The nucleotide sequence of the PCR product showed 99% homology to the R. anatipestifer sequences in the NCBI. The antibiogram revealed that the organisms were sensitive to ciprofloxacin, enrofloxacin, and gentamicin. Conclusion: The present study suggests that the PCR assay can facilitate fast and proper identification of R. anatipestifer infection in ducks. The assay can also differentiate between R. anatipestifer and Pasteurella multocida and can replace the traditional methods of differentiation which are cumbersome and time-consuming.

A radiation-hardened 1K-bit dielectrically isolated random access memory

International Nuclear Information System (INIS)

Sandors, T.J.; Boarman, J.W.; Kasten, A.J.; Wood, G.M.

1982-01-01

Dielectric Isolation has been used for many years as the bipolar technology for latch-up free, radiation hardened integrated circuits in strategic systems. The state-of-the-art up to this point has been the manufacture of MSI functions containing a maximum of several hundred isolated components. This paper discusses a 1024 Bit Random Access Memory chip containing over 4000 dielectrically isolated components which has been designed for strategic radiation environments. The process utilized and the circuit design of the 1024 Bit RAM have been previously discussed. The techniques used are similar to those employed for the MX digital integrated circuits except for specific items required to make this a true LSI technology. These techniques, along with electrical and radiation data for the RAM, are presented

Compact, Low-Power, and High-Speed Graphene-Based Integrated Photonic Modulator Technology

Science.gov (United States)

2017-11-02

Compact, Low-Power, and High-Speed Graphene- Based Integrated Photonic Modulator Technology The views, opinions and/or findings contained in this...Graphene-Based Integrated Photonic Modulator Technology Report Term: 0-Other Email: sorger@gwu.edu Distribution Statement: 1-Approved for public release...which is an all-time record at Georgia Tech. Protocol Activity Status: Technology Transfer: Nothing to Report PARTICIPANTS: Person Months Worked

Technology, Demographic Characteristics and E-Learning Acceptance: A Conceptual Model Based on Extended Technology Acceptance Model

Science.gov (United States)

Tarhini, Ali; Elyas, Tariq; Akour, Mohammad Ali; Al-Salti, Zahran

2016-01-01

The main aim of this paper is to develop an amalgamated conceptual model of technology acceptance that explains how individual, social, cultural and organizational factors affect the students' acceptance and usage behaviour of the Web-based learning systems. More specifically, the proposed model extends the Technology Acceptance Model (TAM) to…

Modeling methods for systems study of geomechanical and mining technological objects

Energy Technology Data Exchange (ETDEWEB)

Glazov, D D

1983-01-01

Of the basic classes of problems solved during the accepted systems examination of the results of full scale, laboratory and analytical studies, the following are noted: the problems of detecting patterns in the limited empirical base and isolating new physical content in the phenomena which have not received effective explanation within the exhaustive use of the arsenal of traditional methods and techniques; problems for describing the subject field of complex natural systems through isolating their system models in the chaos of contradictory information as the bases for building automated systems for decision making; terminological questions; problems in determining the systems parameters and building structural models of new technologies which provide for dividing the physical effect by levels of geomechanical systems. Thus, at the present time studies of multilevel accepted models of organization of geomechanical systems are interpreted in new methods of structuring by an explosion of roofs difficult to collapse based on its screen creating and multiscreen grinding effect, introduced jointly by the DonUGI at the mines of the Donbass, and new methods for building technological systems for passage by complexes of geological disruptions introduced jointly with the IGD im. Skochinskiy in the Kuzbass and in the Mosbass.

Physical security technology base programs for physical security

International Nuclear Information System (INIS)

Jacobs, J.

1986-01-01

Sandia National Laboratories is the US Department of Energy's lead laboratory for physical security research and development (R and D). In support of this mission, Sandia has maintained for several years an R and D program in each of the following technology areas: Intrusion Detection, Entry Control, CCTV Assessment, Access Delay, Alarm Display, and Guard Equipment and Training. The purpose of the technology base programs is to maintain cognizance of the capabilities of the commercial market, identify improvements and transfer technology to industry and facilities. The output of these programs supports the development of new equipment and advanced system concepts, demonstrations of proof-of-principles and system implementation. This paper will review the status of current developments and discuss trends in new technologies which are being explored for future applications, i.e., artificial intelligence, expert systems, robotics, and more automated systems

Multiculturalism in Technology-Based Education: Case Studies on ICT-Supported Approaches

Science.gov (United States)

Garcia-Penalvo, Francicso Jose

2013-01-01

Our differences in language, cultures, and history around the world play a vital role in the way we learn. As technology-based education continues to be used worldwide, there is an ever growing interest in how multiculturalism comes into effect. Multiculturalism in Technology-Based Education: Case Studies on ICT-Supported Approaches explores the…

Identification and molecular epidemiology of dermatophyte isolates by repetitive-sequence-PCR-based DNA fingerprinting using the DiversiLab system in Turkey.

Science.gov (United States)

Koc, A Nedret; Atalay, Mustafa A; Inci, Melek; Sariguzel, Fatma M; Sav, Hafize

2017-05-01

Dermatophyte species, isolation and identification in clinical samples are still difficult and take a long time. The identification and molecular epidemiology of dermatophytes commonly isolated in a clinical laboratory in Turkey by repetitive sequence-based PCR (rep-PCR) were assessed by comparing the results with those of reference identification. A total of 44 dermatophytes isolated from various clinical specimens of 20 patients with superficial mycoses in Kayseri and 24 patients in Hatay were studied. The identification of dermatophyte isolates was based on the reference identification and rep-PCR using the DiversiLab System (BioMerieux). The genotyping of dermatophyte isolates from different patients was determined by rep-PCR. In the identification of dermatophyte isolates, agreement between rep-PCR and conventional methods was 87.8 % ( 36 of 41). The dermatophyte strains belonged to four clones (A -D) which were determined by the use of rep-PCR. The dermatophyte strains in Clone B, D showed identical patterns with respect to the region. In conclusion, rep-PCR appears to be useful for evaluation of the identification and clonal relationships between Trichophyton rubrum species complex and Trichophyton mentagrophytes species complex isolates. The similarity and diversity of these isolates may be assessed according to different regions by rep-PCR. © 2017 Blackwell Verlag GmbH.

Preparation of Affinity Column Based on Zr4+ Ion for Phosphoproteins Isolation

International Nuclear Information System (INIS)

Lee, Seon Mi; Bae, In Ae; Park, Jung Hyen; Kim, Tae Dong; Choi, Seong Ho

2009-01-01

This paper has described about preparation of Zr 4+ affinity column based on the poly(styreneco- glycidyl methacrylate) prepared by emulsion polymerization of styrene and glycidyl methacrylate in order to isolate phosphopeptide. The Zr 4+ ions were introduced after the phophonation of an epoxy group on polymeric microspheres. The successful preparation of Zr 4+ -immobilized polymeric microsphere stationary phase was confirmed through Fourier transform infrared spectra, optical microscopy, scanning electron microscopy, X-ray photoelectron spectra and inductively coupled plasma-atomic emission spectrometer. The separation efficiency for Zr 4+ affinity column prepared by slurry packing was tested to phosphonated casein and dephosphonated casein. The resolution time (min) of the phosphonated casein was higher than that of dephosphated casein for Zr 4+ affinity polymeric microsphere by liquid chromatography. This Zr 4+ affinity column can be used for isolation of phosphonated casein from casein using liquid chromatography

Pre-Acting Control for Shock and Impact Isolation Systems

Directory of Open Access Journals (Sweden)

D.V. Balandin

2005-01-01

Full Text Available Pre-acting control in shock/impact isolation systems is studied. With pre-acting control, the isolation system begins to respond to an impact before this impact has been applied to the base. The limiting performance of the isolator with pre-acting control is investigated for a single-degree-of-freedom system subject to an instantaneous impact. The isolation performance index is defined as the maximum of the absolute value of the displacement of the object to be isolated relative to the base, provided that the magnitude of the control force transmitted to the object does not exceed a prescribed value. It is shown that there is a substantial advantage in the use of pre-acting isolators over isolators without pre-action. Particular attention is given to a pre-acting isolator based on a passive elastic element (a spring separating the object to be protected from the base. An example illustrates the calculation of the design parameters of such an isolator.

Wafer-level vacuum/hermetic packaging technologies for MEMS

Science.gov (United States)

Lee, Sang-Hyun; Mitchell, Jay; Welch, Warren; Lee, Sangwoo; Najafi, Khalil

2010-02-01

An overview of wafer-level packaging technologies developed at the University of Michigan is presented. Two sets of packaging technologies are discussed: (i) a low temperature wafer-level packaging processes for vacuum/hermeticity sealing, and (ii) an environmentally resistant packaging (ERP) technology for thermal and mechanical control as well as vacuum packaging. The low temperature wafer-level encapsulation processes are implemented using solder bond rings which are first patterned on a cap wafer and then mated with a device wafer in order to encircle and encapsulate the device at temperatures ranging from 200 to 390 °C. Vacuum levels below 10 mTorr were achieved with yields in an optimized process of better than 90%. Pressures were monitored for more than 4 years yielding important information on reliability and process control. The ERP adopts an environment isolation platform in the packaging substrate. The isolation platform is designed to provide low power oven-control, vibration isolation and shock protection. It involves batch flip-chip assembly of a MEMS device onto the isolation platform wafer. The MEMS device and isolation structure are encapsulated at the wafer-level by another substrate with vertical feedthroughs for vacuum/hermetic sealing and electrical signal connections. This technology was developed for high performance gyroscopes, but can be applied to any type of MEMS device.

A Quantitative Exploration of Preservice Teachers' Intent to Use Computer-based Technology

Science.gov (United States)

Kim, Kioh; Jain, Sachin; Westhoff, Guy; Rezabek, Landra

2008-01-01

Based on Bandura's (1977) social learning theory, the purpose of this study is to identify the relationship of preservice teachers' perceptions of faculty modeling of computer-based technology and preservice teachers' intent of using computer-based technology in educational settings. There were 92 participants in this study; they were enrolled in…

Cranioplasty prosthesis manufacturing based on reverse engineering technology

Science.gov (United States)

Chrzan, Robert; Urbanik, Andrzej; Karbowski, Krzysztof; Moskała, Marek; Polak, Jarosław; Pyrich, Marek

2012-01-01

Summary Background Most patients with large focal skull bone loss after craniectomy are referred for cranioplasty. Reverse engineering is a technology which creates a computer-aided design (CAD) model of a real structure. Rapid prototyping is a technology which produces physical objects from virtual CAD models. The aim of this study was to assess the clinical usefulness of these technologies in cranioplasty prosthesis manufacturing. Material/Methods CT was performed on 19 patients with focal skull bone loss after craniectomy, using a dedicated protocol. A material model of skull deficit was produced using computer numerical control (CNC) milling, and individually pre-operatively adjusted polypropylene-polyester prosthesis was prepared. In a control group of 20 patients a prosthesis was manually adjusted to each patient by a neurosurgeon during surgery, without using CT-based reverse engineering/rapid prototyping. In each case, the prosthesis was implanted into the patient. The mean operating times in both groups were compared. Results In the group of patients with reverse engineering/rapid prototyping-based cranioplasty, the mean operating time was shorter (120.3 min) compared to that in the control group (136.5 min). The neurosurgeons found the new technology particularly useful in more complicated bone deficits with different curvatures in various planes. Conclusions Reverse engineering and rapid prototyping may reduce the time needed for cranioplasty neurosurgery and improve the prosthesis fitting. Such technologies may utilize data obtained by commonly used spiral CT scanners. The manufacturing of individually adjusted prostheses should be commonly used in patients planned for cranioplasty with synthetic material. PMID:22207125

Self-biased broadband magnet-free linear isolator based on one-way space-time coherency

Science.gov (United States)

Taravati, Sajjad

2017-12-01

This paper introduces a self-biased broadband magnet-free and linear isolator based on one-way space-time coherency. The incident wave and the space-time-modulated medium share the same temporal frequency and are hence temporally coherent. However, thanks to the unidirectionally of the space-time modulation, the space-time-modulated medium and the incident wave are spatially coherent only in the forward direction and not in the opposite direction. As a consequence, the energy of the medium strongly couples to the propagating wave in the forward direction, while it conflicts with the propagating wave in the opposite direction, yielding strong isolation. We first derive a closed-form solution for the wave scattering from a spatiotemporally coherent medium and then show that a perfectly coherent space-time-modulated medium provides a moderate isolation level which is also subject to one-way transmission gain. To overcome this issue, we next investigate the effect of space-coherency imperfection between the medium and the wave, while they are still perfectly temporally coherent. Leveraging the spatial-coherency imperfection, the medium exhibits a quasiarbitrary and strong nonreciprocal transmission. Finally, we present the experimental demonstration of the self-biased version of the proposed broadband isolator, exhibiting more than 122 % fractional operation bandwidth.

Functional Management Competence and Growth of Young Technology-Based Firms

DEFF Research Database (Denmark)

Salomo, Søren; Brinckmann, Jan; Talke, Katrin

2008-01-01

. While technology management competence is positively driving development speed, the marketing management competence impact on speed is mediated by competitive advantage of the new products developed by young technology-based firms. Financial management competence has no significant link to firm...

Activities to maintain, strengthen and hand down the nuclear technology base

International Nuclear Information System (INIS)

Uchida, Makoto; Oketani, Koichiro

2009-01-01

The recent worldwide 'Nuclear Renaissance' is encouraging the globalization of our nuclear business and making us aware of the increasing importance of the human education and trainings for it. The basic concept of MHI's human resource development and its improvement is 'The improvement in the skills and motivation of each employee leads to the strengthening of the company-wide technology base'. Under this concept we are improving our job efficiency continuously by means of information technology, institutionalizing the means to improve the individual skills and motivation and investing for the effective succession of the skills. In order to take real advantage of those efforts for maintaining, strengthening and effectively handing down the nuclear technology base, it is imperative to keep the volume of actual jobs. So, we have to keep in mind that having actual business continuously is extremely important to keep the sound and solid technology base. (author)

Study of shallow trench isolation technology with a poly-Si sidewall buffer layer

International Nuclear Information System (INIS)

Juang, M H; Chen, C L; Jang, S L

2008-01-01

Shallow trench isolation (STI) technology with a poly-Si buffer layer at the trench sidewall has been studied. At the densification temperature of 950 °C, for the samples without using a poly-Si buffer layer, the resulting junction shows a leakage of about 700 nA cm −2 for a diode area of 100 × 100 µm 2 , primarily due to large peripheral junction leakage. The large leakage is ascribed to the defect generation caused by a thermally induced stress near the trench sidewall. The usage of a poly-Si buffer layer in the trench sidewall is found to significantly improve the junction characteristics. As a result, when a 40 nm poly-Si buffer layer is sandwiched between the Si substrate and the trench-fill silicon oxide, the resultant junctions show a leakage of only about 8 nA cm −2 . This result may reflect the considerably reduced thermally induced stress near the trench sidewall. Furthermore, at the densification temperature of 1100 °C, the usage of a poly-Si buffer layer can help to achieve excellent junctions with a leakage smaller than 5 nA cm −2 for a diode area of 100 × 100 µm 2

Strategic Planning for Computer-Based Educational Technology.

Science.gov (United States)

Bozeman, William C.

1984-01-01

Offers educational practitioners direction for the development of a master plan for the implementation and application of computer-based educational technology by briefly examining computers in education, discussing organizational change from a theoretical perspective, and presenting an overview of the planning strategy known as the planning and…

DNA isolation by galactoacrylate-based nano-poly(HEMA-co-Gal-OPA) nanopolymers.

Science.gov (United States)

Türkcan Kayhan, Ceren; Zeynep Ural, Fulden; Koruyucu, Meryem; Gül Salman, Yeşim; Uygun, Murat; Aktaş Uygun, Deniz; Akgöl, Sinan; Denizli, Adil

2017-10-01

Isolation of DNA is one of the important processes for biotechnological applications such as investigation of DNA structures and functions, recombinant DNA preparations, identification of genetic factors and diagnosis and treatment of genetic disorders. The aim of this study was to synthesis and characterizes the galactoacrylate based nanopolymers with high surface area and to investigate the usability of these synthesized nanopolymers for DNA isolation studies. Nanopolymers were synthesized by the surfactant free emulsion polymerization technique by using the monomers of 2-hydroxyl ethylmethacrylate and 6-O-(2 ' -hydroxy-3 ' -acryloyloxypropyl)-1,2:3,4-di-O-isopropylidene-α-D-galactopyranose. Galactoacrylate origin of these newly synthesized nanopolymers increased the interaction between DNA and nanopolymers. Prepared nanopolymers were characterized by SEM, FT-IR and ZETA sizer analysis. Synthesized nanopolymers were spherical, and their average particle size was about 246.8 nm. Adsorption of DNA onto galactoacrylate based nanopolymers was investigated by using different pHs, temperatures, ionic strength, DNA concentrations and desorption studies and maximum DNA adsorption was found to be as 567.12 mg/g polymer at 25 °C, in pH 5.0 acetate buffer. Reusability was investigated for 5 successive reuse and DNA adsorption capacity decreased only about 10% at the end of the 5th reuse.

Influence of DNA isolation on Q-PCR-based quantification of methanogenic Archaea in biogas fermenters.

Science.gov (United States)

Bergmann, I; Mundt, K; Sontag, M; Baumstark, I; Nettmann, E; Klocke, M

2010-03-01

Quantitative real-time PCR (Q-PCR) is commonly applied for the detection of certain microorganisms in environmental samples. However, some environments, like biomass-degrading biogas fermenters, are enriched with PCR-interfering substances. To study the impact of the DNA extraction protocol on the results of Q-PCR-based analysis of the methane-producing archaeal community in biogas fermenters, nine different protocols with varying cell disruption and DNA purification approaches were tested. Differences in the quantities of the isolated DNA and the purity parameters were found, with the best cell lysis efficiencies being obtained by a combined lysozyme/SDS-based lysis. When DNA was purified by sephacryl columns, the amount of DNA decreased by one log cycle but PCR inhibitors were eliminated sufficiently. In the case of detection of methanogenic Archaea, the chosen DNA isolation protocol strongly influenced the Q-PCR-based determination of 16S rDNA copy numbers. For example, with protocols including mechanical cell disruption, the 16S rDNA of Methanobacteriales were predominantly amplified (81-90% of the total 16S rDNA copy numbers), followed by the 16S rDNA of Methanomicrobiales (9-18%). In contrast, when a lysozyme/SDS-based cell lysis was applied, the 16S rDNA copy numbers determined for these two orders were the opposite (Methanomicrobiales 82-95%, Methanobacteriales 4-18%). In extreme cases, the DNA isolation method led to discrimination of some groups of methanogens (e.g. members of the Methanosaetaceae). In conclusion, for extraction of high amounts of microbial DNA with high purity from samples of biogas plants, a combined lysozyme/SDS-based cell lysis followed by a purification step with sephacryl columns is recommended. Copyright 2010 Elsevier GmbH. All rights reserved.