Detection of Differential Item Functioning with Nonlinear Regression: A Non-IRT Approach Accounting for Guessing

Science.gov (United States)

Drabinová, Adéla; Martinková, Patrícia

2017-01-01

In this article we present a general approach not relying on item response theory models (non-IRT) to detect differential item functioning (DIF) in dichotomous items with presence of guessing. The proposed nonlinear regression (NLR) procedure for DIF detection is an extension of method based on logistic regression. As a non-IRT approach, NLR can…

IRT-Estimated Reliability for Tests Containing Mixed Item Formats

Science.gov (United States)

Shu, Lianghua; Schwarz, Richard D.

2014-01-01

As a global measure of precision, item response theory (IRT) estimated reliability is derived for four coefficients (Cronbach's a, Feldt-Raju, stratified a, and marginal reliability). Models with different underlying assumptions concerning test-part similarity are discussed. A detailed computational example is presented for the targeted…

Comparing Different Approaches of Bias Correction for Ability Estimation in IRT Models. Research Report. ETS RR-08-13

Science.gov (United States)

Lee, Yi-Hsuan; Zhang, Jinming

2008-01-01

The method of maximum-likelihood is typically applied to item response theory (IRT) models when the ability parameter is estimated while conditioning on the true item parameters. In practice, the item parameters are unknown and need to be estimated first from a calibration sample. Lewis (1985) and Zhang and Lu (2007) proposed the expected response…

Preliminary Analysis on the Management Options of IRT-DPRK Research Reactor

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung-Hyun; Kim, Minsoo; Hwang, Yongsoo [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

2015-05-15

Although IRT-DPRK was upgraded several times, operation lifetime was already exhausted and thus management policy is needed to deal with the aging of IRT-DPRK. For example, IRT- 2000 type nuclear reactors in Georgia and Bulgaria had been shut down to refurbish or decommissioned to establish new low power facilities. However, the existing negotiations and agreements related to the nuclear issues on North Korea have been focused on the 'denuclearization', and thus the issues on the IRTDPRK were not handled. In recent, a group of USA scientists has suggested that IRT-DPRK should be refurbished to establish the 'Scientific cent for excellence' like the Cooperative Threat Reduction program applied in Russia and the former Soviet Union (FSU). In this paper, we examined the several options to manage the IRT-DPRK through the study of similar foreign cases. Due to the lack of the detailed and standardized information, it is impossible to suggest the best option at this moment. In order to do that, the further research on the detailed procedures, radioactive wastes, the standards of safety and security are needed.

IRT Item Parameter Recovery with Marginal Maximum Likelihood Estimation Using Loglinear Smoothing Models

Science.gov (United States)

Casabianca, Jodi M.; Lewis, Charles

2015-01-01

Loglinear smoothing (LLS) estimates the latent trait distribution while making fewer assumptions about its form and maintaining parsimony, thus leading to more precise item response theory (IRT) item parameter estimates than standard marginal maximum likelihood (MML). This article provides the expectation-maximization algorithm for MML estimation…

A MATLAB Package for Markov Chain Monte Carlo with a Multi-Unidimensional IRT Model

Directory of Open Access Journals (Sweden)

Yanyan Sheng

2008-11-01

Full Text Available Unidimensional item response theory (IRT models are useful when each item is designed to measure some facet of a unified latent trait. In practical applications, items are not necessarily measuring the same underlying trait, and hence the more general multi-unidimensional model should be considered. This paper provides the requisite information and description of software that implements the Gibbs sampler for such models with two item parameters and a normal ogive form. The software developed is written in the MATLAB package IRTmu2no. The package is flexible enough to allow a user the choice to simulate binary response data with multiple dimensions, set the number of total or burn-in iterations, specify starting values or prior distributions for model parameters, check convergence of the Markov chain, as well as obtain Bayesian fit statistics. Illustrative examples are provided to demonstrate and validate the use of the software package.

Conscientiousness at the workplace: Applying mixture IRT to investigate scalability and predictive validity

NARCIS (Netherlands)

Egberink, I.J.L.; Meijer, R.R.; Veldkamp, Bernard P.

2010-01-01

Mixture item response theory (IRT) models have been used to assess multidimensionality of the construct being measured and to detect different response styles for different groups. In this study a mixture version of the graded response model was applied to investigate scalability and predictive

Conscientiousness in the workplace : Applying mixture IRT to investigate scalability and predictive validity

NARCIS (Netherlands)

Egberink, I.J.L.; Meijer, R.R.; Veldkamp, B.P.

Mixture item response theory (IRT) models have been used to assess multidimensionality of the construct being measured and to detect different response styles for different groups. In this study a mixture version of the graded response model was applied to investigate scalability and predictive

Detecting DIF in Polytomous Items Using MACS, IRT and Ordinal Logistic Regression

Science.gov (United States)

Elosua, Paula; Wells, Craig

2013-01-01

The purpose of the present study was to compare the Type I error rate and power of two model-based procedures, the mean and covariance structure model (MACS) and the item response theory (IRT), and an observed-score based procedure, ordinal logistic regression, for detecting differential item functioning (DIF) in polytomous items. A simulation…

A neutron radiography facility on the IRT-2000 reactor

International Nuclear Information System (INIS)

Khadduri, I.Y.

1976-01-01

A neutron radiography facility has been constructed on the thermal neutron channel of the IRT-2000 reactor. A collimated thermal neutron beam exposure area of 10 cm diameter is obtained with an L/D ratio of 48.8. The film used is cellulose nitrate coated with lithium tetraborate which is insensitive to gamma and beta radiation. Some pictures with good contrast and resolution have been obtained. Pictures of parts of an IRT-2000 reactor fuel pin have also been recorded. (orig) [de

RIBD-IRT, Isotope Buildup and Isotope Decay from Fission Source

International Nuclear Information System (INIS)

1990-01-01

1 - Description of problem or function: RIBD-IRT calculates isotopic concentrations resulting from two fission sources with normal down- chain decay by beta emission and isomeric transfers and inter-chain coupling resulting from (n,gamma) reactions. Calculations can be made to follow an irradiation history through an unlimited number of step changes of unrestricted duration and variability including shutdown periods, restarts at different power levels and/or any other level changes. In addition, the program permits to track and modify the concentration of individual elements as they decay with time following reactor shutdown. Tracking individual elements enables one to estimate time-dependent source terms for a hypothetical LOCA based on known or postulated fission product release mechanisms. 2 - Method of solution: RIBD-IRT is a grid processor. It organizes the various members described by the fission product library data into a grid with the various linkages established from chain branching data, yield data, and neutron capture cross sections with their branching ratios. Radioactive decay includes not only the simple member-to-member cascade but also the more complex forms where branching may be partially or completely skip one or two intervening members

Solution of operational problems utilization of an EX-IRT-2000 heat exchanger

International Nuclear Information System (INIS)

Razak, Abdu

1986-01-01

The Bandung TRIGA Mark II Reactor has been successfully operated for 21 years, especially in low power operation or as neutron sources for various experiments. Most of the operating time, approximately 80% of routine operation, was dedicated for radio-isotope production. During routine operation for radio-isotope production, the reactor could not be operated at full power. The reactor was operated at 60% of the maximum power (1 MWth) due to the inability of the original heat exchanger to operate properly. The reason is that slack deposition was built-up on the secondary side of the heat exchanger. Therefore, it reduced the coefficient of heat transfer considerably. To solve the problems, a set of heat exchanger including the pump was installed In parallel with the original unit. The heat exchanger was an IRT-2000 Reactor Heat exchanger which was collected from the abandoned IRT-2000 Project. The heat exchanger has capacity of 1.25 MW. The new heat exchanger could reduced the outlet temperature of the primary coolant Into 42 deg. C. While the original-heat exchanger at the worst condition and at 600 kW of power reach outlet temperature 49 deg. C. The IRT Heat Exchanger is a counter flow heat exchanger. (author)

Solution of operational problems utilization of an EX-IRT-2000 heat exchanger

Energy Technology Data Exchange (ETDEWEB)

Razak, Abdu [Research Centre for Nuclear Techniques, National Atomic Energy Agency (Indonesia)

1986-07-01

The Bandung TRIGA Mark II Reactor has been successfully operated for 21 years, especially in low power operation or as neutron sources for various experiments. Most of the operating time, approximately 80% of routine operation, was dedicated for radio-isotope production. During routine operation for radio-isotope production, the reactor could not be operated at full power. The reactor was operated at 60% of the maximum power (1 MWth) due to the inability of the original heat exchanger to operate properly. The reason is that slack deposition was built-up on the secondary side of the heat exchanger. Therefore, it reduced the coefficient of heat transfer considerably. To solve the problems, a set of heat exchanger including the pump was installed In parallel with the original unit. The heat exchanger was an IRT-2000 Reactor Heat exchanger which was collected from the abandoned IRT-2000 Project. The heat exchanger has capacity of 1.25 MW. The new heat exchanger could reduced the outlet temperature of the primary coolant Into 42 deg. C. While the original-heat exchanger at the worst condition and at 600 kW of power reach outlet temperature 49 deg. C. The IRT Heat Exchanger is a counter flow heat exchanger. (author)

The Infrared-Optical Telescope (IRT) of the Exist Observatory

Science.gov (United States)

Kutyrev, Alexander; Bloom, Joshua; Gehrels, Neil; Golisano, Craig; Gong, Quan; Grindlay, Jonathan; Moseley, Samuel; Woodgate, Bruce

2010-01-01

The IRT is a 1.1m visible and infrared passively cooled telescope, which can locate, identify and obtain spectra of GRB afterglows at redshifts up to z 20. It will also acquire optical-IR, imaging and spectroscopy of AGN and transients discovered by the EXIST (The Energetic X-ray Imaging Survey Telescope). The IRT imaging and spectroscopic capabilities cover a broad spectral range from 0.32.2m in four bands. The identical fields of view in the four instrument bands are each split in three subfields: imaging, objective prism slitless for the field and objective prism single object slit low resolution spectroscopy, and high resolution long slit on single object. This allows the instrument, to do simultaneous broadband photometry or spectroscopy of the same object over the full spectral range, thus greatly improving the efficiency of the observatory and its detection limits. A prompt follow up (within three minutes) of the transient discovered by the EXIST makes IRT a unique tool for detection and study of these events, which is particularly valuable at wavelengths unavailable to the ground based observatories.

Fitting Diffusion Item Response Theory Models for Responses and Response Times Using the R Package diffIRT

Directory of Open Access Journals (Sweden)

Dylan Molenaar

2015-08-01

Full Text Available In the psychometric literature, item response theory models have been proposed that explicitly take the decision process underlying the responses of subjects to psychometric test items into account. Application of these models is however hampered by the absence of general and flexible software to fit these models. In this paper, we present diffIRT, an R package that can be used to fit item response theory models that are based on a diffusion process. We discuss parameter estimation and model fit assessment, show the viability of the package in a simulation study, and illustrate the use of the package with two datasets pertaining to extraversion and mental rotation. In addition, we illustrate how the package can be used to fit the traditional diffusion model (as it has been originally developed in experimental psychology to data.

Comparing the IRT Pre-equating and Section Pre-equating: A Simulation Study.

Science.gov (United States)

Hwang, Chi-en; Cleary, T. Anne

The results obtained from two basic types of pre-equatings of tests were compared: the item response theory (IRT) pre-equating and section pre-equating (SPE). The simulated data were generated from a modified three-parameter logistic model with a constant guessing parameter. Responses of two replication samples of 3000 examinees on two 72-item…

IRT analyses of the Swedish Dark Triad Dirty Dozen

Directory of Open Access Journals (Sweden)

Danilo Garcia

2018-03-01

Full Text Available Background: The Dark Triad (i.e., Machiavellianism, narcissism, and psychopathy can be captured quickly with 12 items using the Dark Triad Dirty Dozen (Jonason and Webster, 2010. Previous Item Response Theory (IRT analyses of the original English Dark Triad Dirty Dozen have shown that all three subscales adequately tap into the dark domains of personality. The aim of the present study was to analyze the Swedish version of the Dark Triad Dirty Dozen using IRT. Method: 570 individuals (nmales = 326, nfemales = 242, and 2 unreported, including university students and white-collar workers with an age range between 19 and 65 years, responded to the Swedish version of the Dark Triad Dirty Dozen (Garcia et al., 2017a,b. Results: Contrary to previous research, we found that the narcissism scale provided most information, followed by psychopathy, and finally Machiavellianism. Moreover, the psychopathy scale required a higher level of the latent trait for endorsement of its items than the narcissism and Machiavellianism scales. Overall, all items provided reasonable amounts of information and are thus effective for discriminating between individuals. The mean item discriminations (alphas were 1.92 for Machiavellianism, 2.31 for narcissism, and 1.99 for psychopathy. Conclusion: This is the first study to provide IRT analyses of the Swedish version of the Dark Triad Dirty Dozen. Our findings add to a growing literature on the Dark Triad Dirty Dozen scale in different cultures and highlight psychometric characteristics, which can be used for comparative studies. Items tapping into psychopathy showed higher thresholds for endorsement than the other two scales. Importantly, the narcissism scale seems to provide more information about a lack of narcissism, perhaps mirroring cultural conditions. Keywords: Psychology, Psychiatry, Clinical psychology

Measuring individual significant change on the Beck Depression Inventory-II through IRT-based statistics.

NARCIS (Netherlands)

Brouwer, D.; Meijer, R.R.; Zevalkink, D.J.

2013-01-01

Several researchers have emphasized that item response theory (IRT)-based methods should be preferred over classical approaches in measuring change for individual patients. In the present study we discuss and evaluate the use of IRT-based statistics to measure statistical significant individual

Measuring Anxiety in Visually-Impaired People: A Comparison between the Linear and the Nonlinear IRT Approaches

Science.gov (United States)

Ferrando, Pere J.; Pallero, Rafael; Anguiano-Carrasco, Cristina

2013-01-01

The present study has two main interests. First, some pending issues about the psychometric properties of the CTAC (an anxiety questionnaire for blind and visually-impaired people) are assessed using item response theory (IRT). Second, the linear model is compared to the graded response model (GRM) in terms of measurement precision, sensitivity…

Does guessing matter? Differences between ability estimates from 2PL and 3PL IRT models in case of guessing

Directory of Open Access Journals (Sweden)

Tomasz Żółtak

2015-09-01

Full Text Available Modern approaches to measuring cognitive ability and testing knowledge frequently use multiple-choice items. These can be simply and rapidly scored without problems associated with rater subjectivity. Nevertheless, multiple-choice tests are often criticized owing to their vulnerability to guessing. In this paper the impact of guessing was examined using simulation. Ability estimates were obtained from the two IRT models commonly used for binary-scored items: the two-parameter logistic model and the three-parameter logistic model. The latter approach explicitly models guessing, whilst the former does not. Rather counter-intuitively, little difference was identified for point estimates of ability from the 2PLM and 3PLM. Nevertheless, it should be noted that difficulty and discrimination parameters are severely downwardly biased if a 2PLM is used to calibrate data generated by processes involving guessing. Estimated standard errors for ability estimates also differ considerably between these models.

General plan for the partial dismantling of the IRT-Sofia research reactor

Directory of Open Access Journals (Sweden)

Apostolov Tihomir G.

2006-01-01

Full Text Available After the decision of the Bulgarian Government to reconstruct it, the strategy concerning the IRT-Sofia Research Reactor is to partially dismantle the old systems and equipment. The removal of the reactor core and replacement of old equipment will not pose any significant problems. For a more efficient use of existing resources, there is a need for an engineering project which has been already prepared under the title "General Plan for the Partial Dismantling of Equipment at the IRT-Sofia as a Part of the Reconstruction into a Low Power RR".

Gibberellic acid alleviates cadmium toxicity by reducing nitric oxide accumulation and expression of IRT1 in Arabidopsis thaliana

International Nuclear Information System (INIS)

Zhu, Xiao Fang; Jiang, Tao; Wang, Zhi Wei; Lei, Gui Jie; Shi, Yuan Zhi; Li, Gui Xin; Zheng, Shao Jian

2012-01-01

Highlights: ► Cd reduces endogenous GA levels in Arabidopsis. ► GA exogenous applied decreases Cd accumulation in plant. ► GA suppresses the Cd-induced accumulation of NO. ► Decreased NO level downregulates the expression of IRT1. ► Suppressed IRT1 expression reduces Cd transport across plasma membrane. - Abstract: Gibberellic acid (GA) is involved in not only plant growth and development but also plant responses to abiotic stresses. Here it was found that treating the plants with GA concentrations from 0.1 to 5 μM for 24 h had no obvious effect on root elongation in the absence of cadmium (Cd), whereas in the presence of Cd 2+ , GA at 5 μM improved root growth, reduced Cd content and lipid peroxidation in the roots, indicating that GA can partially alleviate Cd toxicity. Cd 2+ increased nitric oxide (NO) accumulation in the roots, but GA remarkably reduced it, and suppressed the up-regulation of the expression of IRT1. In contrary, the beneficial effect of GA on alleviating Cd toxicity was not observed in an IRT1 knock-out mutant irt1, suggesting the involvement of IRT1 in Cd 2+ absorption. Furthermore, the GA-induced reduction of NO and Cd content can also be partially reversed by the application of a NO donor (S-nitrosoglutathione [GSNO]). Taken all these together, the results showed that GA-alleviated Cd toxicity is mediated through the reduction of the Cd-dependent NO accumulation and expression of Cd 2+ uptake related gene-IRT1 in Arabidopsis.

Methodological issues regarding power of classical test theory (CTT and item response theory (IRT-based approaches for the comparison of patient-reported outcomes in two groups of patients - a simulation study

Directory of Open Access Journals (Sweden)

Boyer François

2010-03-01

Full Text Available Abstract Background Patients-Reported Outcomes (PRO are increasingly used in clinical and epidemiological research. Two main types of analytical strategies can be found for these data: classical test theory (CTT based on the observed scores and models coming from Item Response Theory (IRT. However, whether IRT or CTT would be the most appropriate method to analyse PRO data remains unknown. The statistical properties of CTT and IRT, regarding power and corresponding effect sizes, were compared. Methods Two-group cross-sectional studies were simulated for the comparison of PRO data using IRT or CTT-based analysis. For IRT, different scenarios were investigated according to whether items or person parameters were assumed to be known, to a certain extent for item parameters, from good to poor precision, or unknown and therefore had to be estimated. The powers obtained with IRT or CTT were compared and parameters having the strongest impact on them were identified. Results When person parameters were assumed to be unknown and items parameters to be either known or not, the power achieved using IRT or CTT were similar and always lower than the expected power using the well-known sample size formula for normally distributed endpoints. The number of items had a substantial impact on power for both methods. Conclusion Without any missing data, IRT and CTT seem to provide comparable power. The classical sample size formula for CTT seems to be adequate under some conditions but is not appropriate for IRT. In IRT, it seems important to take account of the number of items to obtain an accurate formula.

Overexpression of ZmIRT1 and ZmZIP3 Enhances Iron and Zinc Accumulation in Transgenic Arabidopsis.

Directory of Open Access Journals (Sweden)

Suzhen Li

Full Text Available Iron and zinc are important micronutrients for both the growth and nutrient availability of crop plants, and their absorption is tightly controlled by a metal uptake system. Zinc-regulated transporters, iron-regulated transporter-like proteins (ZIP, is considered an essential metal transporter for the acquisition of Fe and Zn in graminaceous plants. Several ZIPs have been identified in maize, although their physiological function remains unclear. In this report, ZmIRT1 was shown to be specifically expressed in silk and embryo, whereas ZmZIP3 was a leaf-specific gene. Both ZmIRT1 and ZmZIP3 were shown to be localized to the plasma membrane and endoplasmic reticulum. In addition, transgenic Arabidopsis plants overexpressing ZmIRT1 or ZmZIP3 were generated, and the metal contents in various tissues of transgenic and wild-type plants were examined based on ICP-OES and Zinpyr-1 staining. The Fe and Zn concentration increased in roots and seeds of ZmIRT1-overexpressing plants, while the Fe content in shoots decreased. Overexpressing ZmZIP3 enhanced Zn accumulation in the roots of transgenic plants, while that in shoots was repressed. In addition, the transgenic plants showed altered tolerance to various Fe and Zn conditions compared with wild-type plants. Furthermore, the genes associated with metal uptake were stimulated in ZmIRT1 transgenic plants, while those involved in intra- and inter- cellular translocation were suppressed. In conclusion, ZmIRT1 and ZmZIP3 are functional metal transporters with different ion selectivities. Ectopic overexpression of ZmIRT1 may stimulate endogenous Fe uptake mechanisms, which may facilitate metal uptake and homeostasis. Our results increase our understanding of the functions of ZIP family transporters in maize.

Measurement Invariance in Careers Research: Using IRT to Study Gender Differences in Medical Students' Specialization Decisions

Science.gov (United States)

Behrend, Tara S.; Thompson, Lori Foster; Meade, Adam W.; Newton, Dale A.; Grayson, Martha S.

2008-01-01

The current study demonstrates the use of item response theory (IRT) to conduct measurement invariance analyses in careers research. A self-report survey was used to assess the importance 1,363 fourth-year medical students placed on opportunities to provide comprehensive patient care when choosing a career specialty. IRT analyses supported…

Gibberellic acid alleviates cadmium toxicity by reducing nitric oxide accumulation and expression of IRT1 in Arabidopsis thaliana

Energy Technology Data Exchange (ETDEWEB)

Zhu, Xiao Fang [State Key Laboratory of Plant Physiology and Biochemistry, College of Life Sciences, Zhejiang University, Hangzhou 310058 (China); Jiang, Tao [Key Laboratory of Conservation Biology for Endangered Wildlife of the Ministry of Education, College of Life Sciences, Zhejiang University, Hangzhou 310058 (China); Wang, Zhi Wei [State Key Laboratory of Plant Physiology and Biochemistry, College of Life Sciences, Zhejiang University, Hangzhou 310058 (China); Lei, Gui Jie [Key Laboratory of Conservation Biology for Endangered Wildlife of the Ministry of Education, College of Life Sciences, Zhejiang University, Hangzhou 310058 (China); Shi, Yuan Zhi [The Key Laboratory of Tea Chemical Engineering, Ministry of Agriculture, Yunqi Road 1, Hangzhou 310008 (China); Li, Gui Xin, E-mail: guixinli@zju.edu.cn [College of Agronomy and Biotechnology, Zhejiang University, Hangzhou 310058 (China); Zheng, Shao Jian [State Key Laboratory of Plant Physiology and Biochemistry, College of Life Sciences, Zhejiang University, Hangzhou 310058 (China); Key Laboratory of Conservation Biology for Endangered Wildlife of the Ministry of Education, College of Life Sciences, Zhejiang University, Hangzhou 310058 (China)

2012-11-15

Highlights: Black-Right-Pointing-Pointer Cd reduces endogenous GA levels in Arabidopsis. Black-Right-Pointing-Pointer GA exogenous applied decreases Cd accumulation in plant. Black-Right-Pointing-Pointer GA suppresses the Cd-induced accumulation of NO. Black-Right-Pointing-Pointer Decreased NO level downregulates the expression of IRT1. Black-Right-Pointing-Pointer Suppressed IRT1 expression reduces Cd transport across plasma membrane. - Abstract: Gibberellic acid (GA) is involved in not only plant growth and development but also plant responses to abiotic stresses. Here it was found that treating the plants with GA concentrations from 0.1 to 5 {mu}M for 24 h had no obvious effect on root elongation in the absence of cadmium (Cd), whereas in the presence of Cd{sup 2+}, GA at 5 {mu}M improved root growth, reduced Cd content and lipid peroxidation in the roots, indicating that GA can partially alleviate Cd toxicity. Cd{sup 2+} increased nitric oxide (NO) accumulation in the roots, but GA remarkably reduced it, and suppressed the up-regulation of the expression of IRT1. In contrary, the beneficial effect of GA on alleviating Cd toxicity was not observed in an IRT1 knock-out mutant irt1, suggesting the involvement of IRT1 in Cd{sup 2+} absorption. Furthermore, the GA-induced reduction of NO and Cd content can also be partially reversed by the application of a NO donor (S-nitrosoglutathione [GSNO]). Taken all these together, the results showed that GA-alleviated Cd toxicity is mediated through the reduction of the Cd-dependent NO accumulation and expression of Cd{sup 2+} uptake related gene-IRT1 in Arabidopsis.

TWO-PARAMETER IRT MODEL APPLICATION TO ASSESS PROBABILISTIC CHARACTERISTICS OF PROHIBITED ITEMS DETECTION BY AVIATION SECURITY SCREENERS

Directory of Open Access Journals (Sweden)

Alexander K. Volkov

2017-01-01

Full Text Available The modern approaches to the aviation security screeners’ efficiency have been analyzedand, certain drawbacks have been considered. The main drawback is the complexity of ICAO recommendations implementation concerning taking into account of shadow x-ray image complexity factors during preparation and evaluation of prohibited items detection efficiency by aviation security screeners. Х-ray image based factors are the specific properties of the x-ray image that in- fluence the ability to detect prohibited items by aviation security screeners. The most important complexity factors are: geometric characteristics of a prohibited item; view difficulty of prohibited items; superposition of prohibited items byother objects in the bag; bag content complexity; the color similarity of prohibited and usual items in the luggage.The one-dimensional two-parameter IRT model and the related criterion of aviation security screeners’ qualification have been suggested. Within the suggested model the probabilistic detection characteristics of aviation security screeners are considered as functions of such parameters as the difference between level of qualification and level of x-ray images com- plexity, and also between the aviation security screeners’ responsibility and structure of their professional knowledge. On the basis of the given model it is possible to consider two characteristic functions: first of all, characteristic function of qualifica- tion level which describes multi-complexity level of x-ray image interpretation competency of the aviation security screener; secondly, characteristic function of the x-ray image complexity which describes the range of x-ray image interpretation com- petency of the aviation security screeners having various training levels to interpret the x-ray image of a certain level of com- plexity. The suggested complex criterion to assess the level of the aviation security screener qualification allows to evaluate his or

Nuclear Research Center IRT reactor dynamics calculation

International Nuclear Information System (INIS)

Aleman Fernandez, J.R.

1990-01-01

The main features of the code DIRT, for dynamical calculations are described in the paper. With the results obtained by the program, an analysis of the dynamic behaviour of the Research Reactor IRT of the Nuclear Research Center (CIN) is performed. Different transitories were considered such as variation of the system reactivity, coolant inlet temperature variation and also variations of the coolant velocity through the reactor core. 3 refs

Mathematical Ability and Socio-Economic Background: IRT Modeling to Estimate Genotype by Environment Interaction.

Science.gov (United States)

Schwabe, Inga; Boomsma, Dorret I; van den Berg, Stéphanie M

2017-12-01

Genotype by environment interaction in behavioral traits may be assessed by estimating the proportion of variance that is explained by genetic and environmental influences conditional on a measured moderating variable, such as a known environmental exposure. Behavioral traits of interest are often measured by questionnaires and analyzed as sum scores on the items. However, statistical results on genotype by environment interaction based on sum scores can be biased due to the properties of a scale. This article presents a method that makes it possible to analyze the actually observed (phenotypic) item data rather than a sum score by simultaneously estimating the genetic model and an item response theory (IRT) model. In the proposed model, the estimation of genotype by environment interaction is based on an alternative parametrization that is uniquely identified and therefore to be preferred over standard parametrizations. A simulation study shows good performance of our method compared to analyzing sum scores in terms of bias. Next, we analyzed data of 2,110 12-year-old Dutch twin pairs on mathematical ability. Genetic models were evaluated and genetic and environmental variance components estimated as a function of a family's socio-economic status (SES). Results suggested that common environmental influences are less important in creating individual differences in mathematical ability in families with a high SES than in creating individual differences in mathematical ability in twin pairs with a low or average SES.

Licensing activities for the partial decommissioning of IRT-2000 research reactor in Sofia

International Nuclear Information System (INIS)

Apostolov, T.; Ilieva, Kr.; Papukchiev, A.; Kalchev, B.

2001-01-01

The project for refurbishment of IRT-2000 research reactor in Sofia into low-power reactor (200 kW) is based on the retention of some IRT-2000 buildings, facilities and equipment. The activities, which determine the partial decommissioning should be realized in accordance with preliminary developed licensing documents as General Plan, Safety Analysis Report and Environment Impact assessment Report. The goal of these documents is to provide and guarantee safe and effective activities with radioactive materials, to define strictly the dismantling procedures, and in the same time to minimize their influence on the environment. The Technical Tasks for General Plan, Safety Analysis Report and Environment Impact Assessment Report have been prepared and will be presented as preliminary licensing documents to the National Regulatory Body for approval before their application. A Quality Management system is being developed nowadays at INRNE. After its certification some requirements of the regulatory body will be completed. This certified QA system is a major part of the licensing procedure for the reconstruction of IRT-2000 research reactor. (author)

The development of the nuclear physics in Latvia II. The building of the Research Nuclear Reactor IRT

International Nuclear Information System (INIS)

Ulmanis, U.

2004-01-01

Nuclear research reactor IRT of the Academy of Sciences was built near Riga in Salaspils. IRT is pool aqueous - aqueous reactor with nuclear fuel U-235 contained elements, located in the core at a depth of ∼ 7 m under distilled water. Ten horizontal and 10-15 vertical experimental channels are employed in experimental research with the use of neutron fluxes. For the research with gamma rays is constructed radiation loop facility with liquid In-Ga-SN solid solution as intensive gamma-ray sources. Main activities of IRT are to conduct research in nuclear spectroscopy, neutron activation analysis, neutron diffraction and radiation physics, chemistry and biology. (authors)

A new network of faint calibration stars from the near infrared spectrometer (NIRS) on the IRTS

Science.gov (United States)

Freund, Minoru M.; Matsuura, Mikako; Murakami, Hiroshi; Cohen, Martin; Noda, Manabu; Matsuura, Shuji; Matsumoto, Toshio

1997-01-01

The point source extraction and calibration of the near infrared spectrometer (NIRS) onboard the Infrared Telescope in Space (IRTS) is described. About 7 percent of the sky was observed during a one month mission in the range of 1.4 micrometers to 4 micrometers. The accuracy of the spectral shape and absolute values of calibration stars provided by the NIRS/IRTS were validated.

Results and Conclusions from the NASA Isokinetic Total Water Content Probe 2009 IRT Test

Science.gov (United States)

Reehorst, Andrew; Brinker, David

2010-01-01

The NASA Glenn Research Center has developed and tested a Total Water Content Isokinetic Sampling Probe. Since, by its nature, it is not sensitive to cloud water particle phase nor size, it is particularly attractive to support super-cooled large droplet and high ice water content aircraft icing studies. The instrument comprises the Sampling Probe, Sample Flow Control, and Water Vapor Measurement subsystems. Results and conclusions are presented from probe tests in the NASA Glenn Icing Research Tunnel (IRT) during January and February 2009. The use of reference probe heat and the control of air pressure in the water vapor measurement subsystem are discussed. Several run-time error sources were found to produce identifiable signatures that are presented and discussed. Some of the differences between measured Isokinetic Total Water Content Probe and IRT calibration seems to be caused by tunnel humidification and moisture/ice crystal blow around. Droplet size, airspeed, and liquid water content effects also appear to be present in the IRT calibration. Based upon test results, the authors provide recommendations for future Isokinetic Total Water Content Probe development.

The design, construction, and operation of the Integrated Radwaste Treatment System (IRTS) Drum Cell

International Nuclear Information System (INIS)

Landau, B.; Russillo, A.; Frank, D.; Garland, D.

1989-12-01

This report describes the design, construction, and the operation of the Integrated Radwaste Treatment Systems (IRTS) Drum Cell at the West Valley Demonstration Project (WVDP), West Valley, New York. The IRTS Drum Cell was designed to provide a shielded, secure storage area for the remote handling and placement of low-level Class C radioactive waste produced in the IRTS. The Drum Cell was designed to contain up to approximately 8,804 drums from decontaminated supernatant processing. This waste is to be poured into 0.27m 3 in a temperature controlled environment to ensure the cement will not be subjected to freezing and thawing cycles. A Temporary Weather Structure (TWS), a pre-engineered building, now encloses the Drum Cell and associated equipment so that remote waste-handling and placement operations can continue without regard to weather conditions. The Drum Cell was designed so that this TWS could be removed and the low-level waste entombed in place. Final disposition of this low-level waste is currently being evaluated in an Environmental Impact Statement (EIS). 10 refs., 11 figs., 1 tab

Inoculation with Bacillus subtilis and Azospirillum brasilense produces abscisic acid that reduces IRT1-mediated cadmium uptake of roots.

Science.gov (United States)

Xu, Qianru; Pan, Wei; Zhang, Ranran; Lu, Qi; Xue, Wanlei; Wu, Cainan; Song, Bixiu; Du, Shaoting

2018-05-08

Cadmium (Cd) contamination of agricultural soils represents a serious risk to crop safety. A new strategy using abscisic acid (ABA)-generating bacteria, Bacillus subtilis or Azospirillum brasilense, was developed to reduce the Cd accumulation in plants grown in Cd-contaminated soil. Inoculation with either bacterium resulted in a pronounced increase in the ABA level in wild-type Arabidopsis Col-0 plants, accompanied by a decrease in Cd levels in plant tissues, which mitigated the Cd toxicity. As a consequence, the growth of plants exposed to Cd was improved. Nevertheless, B. subtilis and A. brasilense inoculation had little effect on Cd levels and toxicity in the ABA-insensitive mutant snrk 2.2/2.3, indicating that the action of ABA is required for these bacteria to reduce Cd accumulation in plants. Furthermore, inoculation with either B. subtilis or A. brasilense down-regulated the expression of IRT1 (IRON-REGULATED TRANSPORTER 1) in the roots of wild-type plants and had little effect on Cd levels in the IRT1-knockout mutants irt1-1 and irt1-2. In summary, we conclude that B. subtilis and A. brasilense can reduce Cd levels in plants via an IRT1-dependent ABA-mediated mechanism.

Time evolution of the energy confinement time, internal inductance and effective edge safety factor on IR-T1 tokamak

International Nuclear Information System (INIS)

Salar Elahi, A; Ghoranneviss, M

2010-01-01

An attempt is made to investigate the time evolution of the energy confinement time, internal inductance and effective edge safety factor on IR-T1 tokamak. For this purpose, four magnetic pickup coils were designed, constructed and installed on the outer surface of the IR-T1 and then the Shafranov parameter (asymmetry factor) was obtained from them. On the other hand, also a diamagnetic loop was designed and installed on IR-T1 and poloidal beta was determined from it. Therefore, the internal inductance and effective edge safety factor were measured. Also, the time evolution of the energy confinement time was measured using the diamagnetic loop. Experimental results on IR-T1 show that the maximum energy confinement time (which corresponds to minimum collisions, minimum microinstabilities and minimum transport) is at low values of the effective edge safety factor (2.5 eff (a) i <0.72). The results obtained are in agreement with those obtained with the theoretical approach [1-5].

Item Response Theory with Covariates (IRT-C): Assessing Item Recovery and Differential Item Functioning for the Three-Parameter Logistic Model

Science.gov (United States)

Tay, Louis; Huang, Qiming; Vermunt, Jeroen K.

2016-01-01

In large-scale testing, the use of multigroup approaches is limited for assessing differential item functioning (DIF) across multiple variables as DIF is examined for each variable separately. In contrast, the item response theory with covariate (IRT-C) procedure can be used to examine DIF across multiple variables (covariates) simultaneously. To…

Psychometric properties for the Balanced Inventory of Desirable Responding: dichotomous versus polytomous conventional and IRT scoring.

Science.gov (United States)

Vispoel, Walter P; Kim, Han Yi

2014-09-01

[Correction Notice: An Erratum for this article was reported in Vol 26(3) of Psychological Assessment (see record 2014-16017-001). The mean, standard deviation and alpha coefficient originally reported in Table 1 should be 74.317, 10.214 and .802, respectively. The validity coefficients in the last column of Table 4 are affected as well. Correcting this error did not change the substantive interpretations of the results, but did increase the mean, standard deviation, alpha coefficient, and validity coefficients reported for the Honesty subscale in the text and in Tables 1 and 4. The corrected versions of Tables 1 and Table 4 are shown in the erratum.] Item response theory (IRT) models were applied to dichotomous and polytomous scoring of the Self-Deceptive Enhancement and Impression Management subscales of the Balanced Inventory of Desirable Responding (Paulhus, 1991, 1999). Two dichotomous scoring methods reflecting exaggerated endorsement and exaggerated denial of socially desirable behaviors were examined. The 1- and 2-parameter logistic models (1PLM, 2PLM, respectively) were applied to dichotomous responses, and the partial credit model (PCM) and graded response model (GRM) were applied to polytomous responses. For both subscales, the 2PLM fit dichotomous responses better than did the 1PLM, and the GRM fit polytomous responses better than did the PCM. Polytomous GRM and raw scores for both subscales yielded higher test-retest and convergent validity coefficients than did PCM, 1PLM, 2PLM, and dichotomous raw scores. Information plots showed that the GRM provided consistently high measurement precision that was superior to that of all other IRT models over the full range of both construct continuums. Dichotomous scores reflecting exaggerated endorsement of socially desirable behaviors provided noticeably weak precision at low levels of the construct continuums, calling into question the use of such scores for detecting instances of "faking bad." Dichotomous

Marginal Maximum Likelihood Estimation of Item Response Models in R

Directory of Open Access Journals (Sweden)

Matthew S. Johnson

2007-02-01

Full Text Available Item response theory (IRT models are a class of statistical models used by researchers to describe the response behaviors of individuals to a set of categorically scored items. The most common IRT models can be classified as generalized linear fixed- and/or mixed-effect models. Although IRT models appear most often in the psychological testing literature, researchers in other fields have successfully utilized IRT-like models in a wide variety of applications. This paper discusses the three major methods of estimation in IRT and develops R functions utilizing the built-in capabilities of the R environment to find the marginal maximum likelihood estimates of the generalized partial credit model. The currently available R packages ltm is also discussed.

Effectiveness of Item Response Theory (IRT) Proficiency Estimation Methods under Adaptive Multistage Testing. Research Report. ETS RR-15-11

Science.gov (United States)

Kim, Sooyeon; Moses, Tim; Yoo, Hanwook Henry

2015-01-01

The purpose of this inquiry was to investigate the effectiveness of item response theory (IRT) proficiency estimators in terms of estimation bias and error under multistage testing (MST). We chose a 2-stage MST design in which 1 adaptation to the examinees' ability levels takes place. It includes 4 modules (1 at Stage 1, 3 at Stage 2) and 3 paths…

Comparison of IRT Likelihood Ratio Test and Logistic Regression DIF Detection Procedures

Science.gov (United States)

Atar, Burcu; Kamata, Akihito

2011-01-01

The Type I error rates and the power of IRT likelihood ratio test and cumulative logit ordinal logistic regression procedures in detecting differential item functioning (DIF) for polytomously scored items were investigated in this Monte Carlo simulation study. For this purpose, 54 simulation conditions (combinations of 3 sample sizes, 2 sample…

Decommissioning of the research nuclear reactor IRT-M and problems connected with radioactive waste

International Nuclear Information System (INIS)

Abramidze, S.P.; Katamadze, N.M.; Kiknadze, G.G.; Saralidze, Z.K.

2000-01-01

The nuclear research reactor IRT-2000 is described, along with modifications and upgrades made over the past three decades. Considerations are outlined which followed a decision to shut-down the reactor and to dismantle it. (author)

Structural versus electronic distortions of symmetry-broken IrTe$_2$

OpenAIRE

Kim, Hyo Sung; Kim, Tae-Hwan; Yang, Junjie; Cheong, Sang-Wook; Yeom, Han Woong

2014-01-01

We investigate atomic and electronic structures of the intriguing low temperature phase of IrTe2 using high-resolution scanning tunneling microscopy and spectroscopy. We confirm various stripe superstructures such as $\\times$3, $\\times$5, and $\\times$8. The strong vertical and lateral distortions of the lattice for the stripe structures are observed in agreement with recent calculations. The spatial modulations of electronic density of states are clearly identified as separated from the struc...

Item level diagnostics and model - data fit in item response theory ...

African Journals Online (AJOL)

Item response theory (IRT) is a framework for modeling and analyzing item response data. Item-level modeling gives IRT advantages over classical test theory. The fit of an item score pattern to an item response theory (IRT) models is a necessary condition that must be assessed for further use of item and models that best fit ...

The first critical experiment with a new type of fuel assemblies IRT-3M on the training reactor VR-I

International Nuclear Information System (INIS)

Matejka, Karel; Sklenka, Lubomir

1997-01-01

The paper 'The first critical experiment with a new type of fuel assemblies IRT-3M on training reactor VR-1 presents basic information about the replacement of fuel on the reactor VR-1 run on FJFI CVUT in Prague. In spring 1997 the IRT-2M fuel type used till then was replaced by the IRT-3M type. When the fuel was replaced, no change in its enrichment was made, i.e. its level remained as 36% 235 U. The replacement itself was carried out in tight co-operation with the Nuclear Research Institute Rez plc., as related to the operation of the research reactor LVR-15. The fuel replacement on the VR-I reactor is a part of the international program RERTR (Reduced Enrichment for Research and Test Reactors) in which the Czech Republic participates. (author)

Developing a Screening Inventory Reading Test (IRT for the Isfahanian Students of the First to Fifth Grade

Directory of Open Access Journals (Sweden)

Bijan Shafiei

2009-12-01

Full Text Available Background and aim: Reading is one of the most essential skills in this century. Reading disorders can cause several problems for the person who has reading disorder. Early assessment and diagnosis play an important role in treatment of this disorder. The main purpose of this study was to develope a screening inventory reading test (IRT for first to fifth grade student in Isfahan in order to early diagnosis of reading disorder.Materials and Methods: The test, consisting of 100 words context and four comprehension questions, named Inventory Reading Test (IRT, was evaluated by several speech therapists. It was standardized by testing on one thousand boys and girls, 200 students in every grade, that were selected through a multi-stage random sampling method. Test was performed on two other groups, a normal and a reading-disordered.Results: Scores of reading accuracy and velocity were highly correlated with the test total score. Test reliability was calculated as 0.77 by Cronbach`s alpha measure. There was significant difference between two groups mean score (p=0.01.Conclusion: IRT seems to be an appropriate tool for screening reading disorder of first to fifth grade students.

Using a Linear Regression Method to Detect Outliers in IRT Common Item Equating

Science.gov (United States)

He, Yong; Cui, Zhongmin; Fang, Yu; Chen, Hanwei

2013-01-01

Common test items play an important role in equating alternate test forms under the common item nonequivalent groups design. When the item response theory (IRT) method is applied in equating, inconsistent item parameter estimates among common items can lead to large bias in equated scores. It is prudent to evaluate inconsistency in parameter…

Bayesian Analysis of Multidimensional Item Response Theory Models: A Discussion and Illustration of Three Response Style Models

Science.gov (United States)

Leventhal, Brian C.; Stone, Clement A.

2018-01-01

Interest in Bayesian analysis of item response theory (IRT) models has grown tremendously due to the appeal of the paradigm among psychometricians, advantages of these methods when analyzing complex models, and availability of general-purpose software. Possible models include models which reflect multidimensionality due to designed test structure,…

Future development of the research nuclear reactor IRT-2000 in Sofia

International Nuclear Information System (INIS)

Apostolov, T.G.

1999-01-01

The present paper presents a short description of the research reactor IRT-2000 Sofia, started in 1961 and operated for 28 years. Some items are considered, connected to the improvements made in the contemporary safety requirements and the unrealized project for modernization to 5 MW. Proposals are considered for reconstruction of reactor site to a 'reactor of low power' for education purposes and as a basis for the country's nuclear technology development. (author)

Tests to control the power distribution in the IRT-2,000 reactor

International Nuclear Information System (INIS)

Filipcuk, E.V.; Potapenko, P.T.; Krjukov, A.P.; Trofimov, A.P.; Kosilov, A.N.; Nebojan, V.T.; Timochin, E.S.

1976-01-01

Results of the investigations of a few structures of such control systems carried out with the help of the IRT 2,000 MIFI reactor in the years 1973/74 are presented in the present work. Within the framework of this study, the successful test of using the transmitter of the direct loading in equipment to control the neutron field was carried out. (orig./TK) [de

Future development of the research nuclear reactor IRT-2000 in Sofia

Energy Technology Data Exchange (ETDEWEB)

Apostolov, T.G. [Institute for Nuclear Research and Nuclear Energy, BAS, Sofia (Bulgaria)

1999-07-01

The present paper presents a short description of the research reactor IRT-2000 Sofia, started in 1961 and operated for 28 years. Some items are considered, connected to the improvements made in the contemporary safety requirements and the unrealized project for modernization to 5 MW. Proposals are considered for reconstruction of reactor site to a 'reactor of low power' for education purposes and as a basis for the country's nuclear technology development. (author)

Experiments in power distribution control on the IRT-2000 reactor

International Nuclear Information System (INIS)

Filipchuk, E.V.; Potapenko, P.T.; Trofimov, A.P.; Kosilov, A.N.; Neboyan, V.T.; Timokhin, E.S.

1975-01-01

The results from the experimental investigations of a system for regulating the neutron field on a research reactor IRT-2000 are shown. The right of such experiments on a reactor with a little active zone is substantiated. A successful attempt was made in this work to apply primary elements of straight charging in the neutron field regulating system. A system with independent instrumentally local regulators, a system with hard cross connections and a structure with a ''floating'' installation are studied. Serial common industrial regulators BRT-2 were used

Improved utilization of ADAS-cog assessment data through item response theory based pharmacometric modeling.

Science.gov (United States)

Ueckert, Sebastian; Plan, Elodie L; Ito, Kaori; Karlsson, Mats O; Corrigan, Brian; Hooker, Andrew C

2014-08-01

This work investigates improved utilization of ADAS-cog data (the primary outcome in Alzheimer's disease (AD) trials of mild and moderate AD) by combining pharmacometric modeling and item response theory (IRT). A baseline IRT model characterizing the ADAS-cog was built based on data from 2,744 individuals. Pharmacometric methods were used to extend the baseline IRT model to describe longitudinal ADAS-cog scores from an 18-month clinical study with 322 patients. Sensitivity of the ADAS-cog items in different patient populations as well as the power to detect a drug effect in relation to total score based methods were assessed with the IRT based model. IRT analysis was able to describe both total and item level baseline ADAS-cog data. Longitudinal data were also well described. Differences in the information content of the item level components could be quantitatively characterized and ranked for mild cognitively impairment and mild AD populations. Based on clinical trial simulations with a theoretical drug effect, the IRT method demonstrated a significantly higher power to detect drug effect compared to the traditional method of analysis. A combined framework of IRT and pharmacometric modeling permits a more effective and precise analysis than total score based methods and therefore increases the value of ADAS-cog data.

Investigating the Impact of Item Parameter Drift for Item Response Theory Models with Mixture Distributions

Directory of Open Access Journals (Sweden)

Yoon Soo ePark

2016-02-01

Full Text Available This study investigates the impact of item parameter drift (IPD on parameter and ability estimation when the underlying measurement model fits a mixture distribution, thereby violating the item invariance property of unidimensional item response theory (IRT models. An empirical study was conducted to demonstrate the occurrence of both IPD and an underlying mixture distribution using real-world data. Twenty-one trended anchor items from the 1999, 2003, and 2007 administrations of Trends in International Mathematics and Science Study (TIMSS were analyzed using unidimensional and mixture IRT models. TIMSS treats trended anchor items as invariant over testing administrations and uses pre-calibrated item parameters based on unidimensional IRT. However, empirical results showed evidence of two latent subgroups with IPD. Results showed changes in the distribution of examinee ability between latent classes over the three administrations. A simulation study was conducted to examine the impact of IPD on the estimation of ability and item parameters, when data have underlying mixture distributions. Simulations used data generated from a mixture IRT model and estimated using unidimensional IRT. Results showed that data reflecting IPD using mixture IRT model led to IPD in the unidimensional IRT model. Changes in the distribution of examinee ability also affected item parameters. Moreover, drift with respect to item discrimination and distribution of examinee ability affected estimates of examinee ability. These findings demonstrate the need to caution and evaluate IPD using a mixture IRT framework to understand its effect on item parameters and examinee ability.

Investigating the Impact of Item Parameter Drift for Item Response Theory Models with Mixture Distributions.

Science.gov (United States)

Park, Yoon Soo; Lee, Young-Sun; Xing, Kuan

2016-01-01

This study investigates the impact of item parameter drift (IPD) on parameter and ability estimation when the underlying measurement model fits a mixture distribution, thereby violating the item invariance property of unidimensional item response theory (IRT) models. An empirical study was conducted to demonstrate the occurrence of both IPD and an underlying mixture distribution using real-world data. Twenty-one trended anchor items from the 1999, 2003, and 2007 administrations of Trends in International Mathematics and Science Study (TIMSS) were analyzed using unidimensional and mixture IRT models. TIMSS treats trended anchor items as invariant over testing administrations and uses pre-calibrated item parameters based on unidimensional IRT. However, empirical results showed evidence of two latent subgroups with IPD. Results also showed changes in the distribution of examinee ability between latent classes over the three administrations. A simulation study was conducted to examine the impact of IPD on the estimation of ability and item parameters, when data have underlying mixture distributions. Simulations used data generated from a mixture IRT model and estimated using unidimensional IRT. Results showed that data reflecting IPD using mixture IRT model led to IPD in the unidimensional IRT model. Changes in the distribution of examinee ability also affected item parameters. Moreover, drift with respect to item discrimination and distribution of examinee ability affected estimates of examinee ability. These findings demonstrate the need to caution and evaluate IPD using a mixture IRT framework to understand its effects on item parameters and examinee ability.

IRT-LR-DIF with Estimation of the Focal-Group Density as an Empirical Histogram

Science.gov (United States)

Woods, Carol M.

2008-01-01

Item response theory-likelihood ratio-differential item functioning (IRT-LR-DIF) is used to evaluate the degree to which items on a test or questionnaire have different measurement properties for one group of people versus another, irrespective of group-mean differences on the construct. Usually, the latent distribution is presumed normal for both…

Measurement model choice influenced randomized controlled trial results.

Science.gov (United States)

Gorter, Rosalie; Fox, Jean-Paul; Apeldoorn, Adri; Twisk, Jos

2016-11-01

In randomized controlled trials (RCTs), outcome variables are often patient-reported outcomes measured with questionnaires. Ideally, all available item information is used for score construction, which requires an item response theory (IRT) measurement model. However, in practice, the classical test theory measurement model (sum scores) is mostly used, and differences between response patterns leading to the same sum score are ignored. The enhanced differentiation between scores with IRT enables more precise estimation of individual trajectories over time and group effects. The objective of this study was to show the advantages of using IRT scores instead of sum scores when analyzing RCTs. Two studies are presented, a real-life RCT, and a simulation study. Both IRT and sum scores are used to measure the construct and are subsequently used as outcomes for effect calculation. The bias in RCT results is conditional on the measurement model that was used to construct the scores. A bias in estimated trend of around one standard deviation was found when sum scores were used, where IRT showed negligible bias. Accurate statistical inferences are made from an RCT study when using IRT to estimate construct measurements. The use of sum scores leads to incorrect RCT results. Copyright © 2016 Elsevier Inc. All rights reserved.

Cognitive psychology meets psychometric theory: on the relation between process models for decision making and latent variable models for individual differences.

Science.gov (United States)

van der Maas, Han L J; Molenaar, Dylan; Maris, Gunter; Kievit, Rogier A; Borsboom, Denny

2011-04-01

This article analyzes latent variable models from a cognitive psychology perspective. We start by discussing work by Tuerlinckx and De Boeck (2005), who proved that a diffusion model for 2-choice response processes entails a 2-parameter logistic item response theory (IRT) model for individual differences in the response data. Following this line of reasoning, we discuss the appropriateness of IRT for measuring abilities and bipolar traits, such as pro versus contra attitudes. Surprisingly, if a diffusion model underlies the response processes, IRT models are appropriate for bipolar traits but not for ability tests. A reconsideration of the concept of ability that is appropriate for such situations leads to a new item response model for accuracy and speed based on the idea that ability has a natural zero point. The model implies fundamentally new ways to think about guessing, response speed, and person fit in IRT. We discuss the relation between this model and existing models as well as implications for psychology and psychometrics. 2011 APA, all rights reserved

High dose rate (HDR) and low dose rate (LDR) interstitial irradiation (IRT) of the rat spinal cord

International Nuclear Information System (INIS)

Pop, Lucas A.M.; Plas, Mirjam van der; Skwarchuk, Mark W.; Hanssen, Alex E.J.; Kogel, Albert J. van der

1997-01-01

Purpose: To describe a newly developed technique to study radiation tolerance of rat spinal cord to continuous interstitial irradiation (IRT) at different dose rates. Material and methods: Two parallel catheters are inserted just laterally on each side of the vertebral bodies from the level of Th 10 to L 4 . These catheters are afterloaded with two 192 Ir wires of 4 cm length each (activity 1-2.3 mCi/cm) for the low dose rate (LDR) IRT or connected to the HDR micro-Selectron for the high dose rate (HDR) IRT. Spinal cord target volume is located at the level of Th 12 -L 2 . Due to the rapid dose fall-off around the implanted sources, a dose inhomogeneity across the spinal cord thickness is obtained in the dorso-ventral direction. Using the 100% reference dose (rate) at the ventral side of the spinal cord to prescribe the dose, experiments have been carried out to obtain complete dose response curves at average dose rates of 0.49, 0.96 and 120 Gy/h. Paralysis of the hind-legs after 5-6 months and histopathological examination of the spinal cord of each irradiated rat are used as experimental endpoints. Results: The histopathological damage seen after irradiation is clearly reflected the inhomogeneous dose distribution around the implanted catheters, with the damage predominantly located in the dorsal tract of the cord or dorsal roots. With each reduction in average dose rate, spinal cord radiation tolerance is significantly increased. When the dose is prescribed at the 100% reference dose rate, the ED 50 (induction of paresis in 50% of the animals) for the HDR-IRT is 17.3 Gy. If the average dose rate is reduced from 120 Gy/h to 0.96 or 0.49 Gy/h, a 2.9- or 4.7-fold increase in the ED 50 values to 50.3 Gy and 80.9 Gy is observed; for the dose prescribed at the 150% reference dose rate (dorsal side of cord) ED 50 values are 26.0, 75.5 and 121.4 Gy, respectively. Using different types of analysis and in dependence of the dose prescription and reference dose rate, the �

Robust Scale Transformation Methods in IRT True Score Equating under Common-Item Nonequivalent Groups Design

Science.gov (United States)

He, Yong

2013-01-01

Common test items play an important role in equating multiple test forms under the common-item nonequivalent groups design. Inconsistent item parameter estimates among common items can lead to large bias in equated scores for IRT true score equating. Current methods extensively focus on detection and elimination of outlying common items, which…

ITEM LEVEL DIAGNOSTICS AND MODEL - DATA FIT IN ITEM ...

African Journals Online (AJOL)

Global Journal

Item response theory (IRT) is a framework for modeling and analyzing item response ... data. Though, there is an argument that the evaluation of fit in IRT modeling has been ... National Council on Measurement in Education ... model data fit should be based on three types of ... prediction should be assessed through the.

New tests of the common calibration context for ISO, IRTS, and MSX

Science.gov (United States)

Cohen, Martin

1997-01-01

The work carried out in order to test, verify and validate the accuracy of the calibration spectra provided to the Infrared Space Observatory (ISO), to the Infrared Telescope in Space (IRTS) and to the Midcourse Space Experiment (MSX) for external calibration support of instruments, is reviewed. The techniques, used to vindicate the accuracy of the absolute spectra, are discussed. The work planned for comparing far infrared spectra of Mars and some of the bright stellar calibrators with long wavelength spectrometer data are summarized.

Extended Mixed-Efects Item Response Models with the MH-RM Algorithm

Science.gov (United States)

Chalmers, R. Philip

2015-01-01

A mixed-effects item response theory (IRT) model is presented as a logical extension of the generalized linear mixed-effects modeling approach to formulating explanatory IRT models. Fixed and random coefficients in the extended model are estimated using a Metropolis-Hastings Robbins-Monro (MH-RM) stochastic imputation algorithm to accommodate for…

Landslide Mapping and Characterization through Infrared Thermography (IRT: Suggestions for a Methodological Approach from Some Case Studies

Directory of Open Access Journals (Sweden)

William Frodella

2017-12-01

Full Text Available In this paper, the potential of Infrared Thermography (IRT as a novel operational tool for landslide surveying, mapping and characterization was tested and demonstrated in different case studies, by analyzing various types of instability processes (rock slide/fall, roto-translational slide-flow. In particular, IRT was applied, both from terrestrial and airborne platforms, in an integrated methodology with other geomatcs methods, such as terrestrial laser scanning (TLS and global positioning systems (GPS, for the detection and mapping of landslides’ potentially hazardous structural and morphological features (structural discontinuities and open fractures, scarps, seepage and moisture zones, landslide drainage network and ponds. Depending on the study areas’ hazard context, the collected remotely sensed data were validated through field inspections, with the purpose of studying and verifying the causes of mass movements. The challenge of this work is to go beyond the current state of the art of IRT in landslide studies, with the aim of improving and extending the investigative capacity of the analyzed technique, in the framework of a growing demand for effective Civil Protection procedures in landslide geo-hydrological disaster managing activities. The proposed methodology proved to be an effective tool for landslide analysis, especially in the field of emergency management, when it is often necessary to gather all the required information in dangerous environments as fast as possible, to be used for the planning of mitigation measures and the evaluation of hazardous scenarios. Advantages and limitations of the proposed method in the field of the explored applications were evaluated, as well as general operative recommendations and future perspectives.

Re-evaluating a vision-related quality of life questionnaire with item response theory (IRT and differential item functioning (DIF analyses

Directory of Open Access Journals (Sweden)

Knol Dirk L

2011-09-01

Full Text Available Abstract Background For the Low Vision Quality Of Life questionnaire (LVQOL it is unknown whether the psychometric properties are satisfactory when an item response theory (IRT perspective is considered. This study evaluates some essential psychometric properties of the LVQOL questionnaire in an IRT model, and investigates differential item functioning (DIF. Methods Cross-sectional data were used from an observational study among visually-impaired patients (n = 296. Calibration was performed for every dimension of the LVQOL in the graded response model. Item goodness-of-fit was assessed with the S-X2-test. DIF was assessed on relevant background variables (i.e. age, gender, visual acuity, eye condition, rehabilitation type and administration type with likelihood-ratio tests for DIF. The magnitude of DIF was interpreted by assessing the largest difference in expected scores between subgroups. Measurement precision was assessed by presenting test information curves; reliability with the index of subject separation. Results All items of the LVQOL dimensions fitted the model. There was significant DIF on several items. For two items the maximum difference between expected scores exceeded one point, and DIF was found on multiple relevant background variables. Item 1 'Vision in general' from the "Adjustment" dimension and item 24 'Using tools' from the "Reading and fine work" dimension were removed. Test information was highest for the "Reading and fine work" dimension. Indices for subject separation ranged from 0.83 to 0.94. Conclusions The items of the LVQOL showed satisfactory item fit to the graded response model; however, two items were removed because of DIF. The adapted LVQOL with 21 items is DIF-free and therefore seems highly appropriate for use in heterogeneous populations of visually impaired patients.

Neutron polarizing set-up of the Sofia IRT research reactor

International Nuclear Information System (INIS)

Krezhov, K.; Mikhajlova, V.; Okorokov, A.

1990-01-01

Neutron polarizing set-up of one of the horizontal beam tubes of the IRT-200 research reactor of the Bulgarian Institute of Nuclear Research and Nuclear Energy is presented. Neutron mirrors are extensively used in an effort to compensate the moderate reactor beam intensity by the high reflected intensity and wide-band transmittance of the mirror neutron guides. Time-to-flight technique using a slotted neutron absorbing chopper with a horizontal rotation axis has been applied to obtain the exit neutron spectra. Beam polarization and flipping ratios have been determined. Cadmium ratio in the polarized beam has been found almost 10 4 and the average polarization has been measured to be higher than 96%. 3 figs, 3 refs

Design and Preliminary Results of a Feedback Circuit for Plasma Displacement Control in IR-T1 Tokamak

International Nuclear Information System (INIS)

TalebiTaher, A.; Ghoranneviss, M.; Tarkeshian, R.; Salem, M. K.; Khorshid, P.

2008-01-01

Since displacement is very important for plasma position control, in IR-T1 tokamak a combination of two cosine coils and two saddle sine coils is used for horizontal displacement measurement. According to the multiple moment theory, the output of these coils linearly depends to radial displacement of plasma column. A new circuit for adding these signals to feedback system designed and unwanted effects of other fields in final output compensated. After compensation and calibration of the system, the output of horizontal displacement circuits applied to feedback control system. By considers the required auxiliary vertical field, a proportional amplifier and driver circuit are constructed to drive power transistors these power transistors switch the feedback bank capacitors. In the experiment, a good linear proportionality between displacement and output observed by applying an appropriate feedback field, the linger confinement time in IR-T1 tokamak obtained, applying this system to discharge increased the plasma duration and realizes repetitive discharges

A quantitative comparison of noise reduction across five commercial (hybrid and model-based) iterative reconstruction techniques: an anthropomorphic phantom study.

Science.gov (United States)

Patino, Manuel; Fuentes, Jorge M; Hayano, Koichi; Kambadakone, Avinash R; Uyeda, Jennifer W; Sahani, Dushyant V

2015-02-01

OBJECTIVE. The objective of our study was to compare the performance of three hybrid iterative reconstruction techniques (IRTs) (ASiR, iDose4, SAFIRE) and their respective strengths for image noise reduction on low-dose CT examinations using filtered back projection (FBP) as the standard reference. Also, we compared the performance of these three hybrid IRTs with two model-based IRTs (Veo and IMR) for image noise reduction on low-dose examinations. MATERIALS AND METHODS. An anthropomorphic abdomen phantom was scanned at 100 and 120 kVp and different tube current-exposure time products (25-100 mAs) on three CT systems (for ASiR and Veo, Discovery CT750 HD; for iDose4 and IMR, Brilliance iCT; and for SAFIRE, Somatom Definition Flash). Images were reconstructed using FBP and using IRTs at various strengths. Nine noise measurements (mean ROI size, 423 mm(2)) on extracolonic fat for the different strengths of IRTs were recorded and compared with FBP using ANOVA. Radiation dose, which was measured as the volume CT dose index and dose-length product, was also compared. RESULTS. There were no significant differences in radiation dose and image noise among the scanners when FBP was used (p > 0.05). Gradual image noise reduction was observed with each increasing increment of hybrid IRT strength, with a maximum noise suppression of approximately 50% (48.2-53.9%). Similar noise reduction was achieved on the scanners by applying specific hybrid IRT strengths. Maximum noise reduction was higher on model-based IRTs (68.3-81.1%) than hybrid IRTs (48.2-53.9%) (p < 0.05). CONCLUSION. When constant scanning parameters are used, radiation dose and image noise on FBP are similar for CT scanners made by different manufacturers. Significant image noise reduction is achieved on low-dose CT examinations rendered with IRTs. The image noise on various scanners can be matched by applying specific hybrid IRT strengths. Model-based IRTs attain substantially higher noise reduction than hybrid

An NCME Instructional Module on Item-Fit Statistics for Item Response Theory Models

Science.gov (United States)

Ames, Allison J.; Penfield, Randall D.

2015-01-01

Drawing valid inferences from item response theory (IRT) models is contingent upon a good fit of the data to the model. Violations of model-data fit have numerous consequences, limiting the usefulness and applicability of the model. This instructional module provides an overview of methods used for evaluating the fit of IRT models. Upon completing…

How Often Is the Misfit of Item Response Theory Models Practically Significant?

Science.gov (United States)

Sinharay, Sandip; Haberman, Shelby J.

2014-01-01

Standard 3.9 of the Standards for Educational and Psychological Testing ([, 1999]) demands evidence of model fit when item response theory (IRT) models are employed to data from tests. Hambleton and Han ([Hambleton, R. K., 2005]) and Sinharay ([Sinharay, S., 2005]) recommended the assessment of practical significance of misfit of IRT models, but…

Annual report of the working group 'fuel pin and fuel element mechanics' of the Institut fuer Reaktortechnik (IRT) of the Technische Hochschule Darmstadt for the Fast Breeder Project

International Nuclear Information System (INIS)

Fabian, H.; Humbach, W.; Lassmann, K.; Mueller, J.J.; Preusser, T.; Schmelz, K.

1978-09-01

This report comprises six single lectures given at an information meeting organized by the Institut fuer Reaktortechnik der Technischen Hochschule Darmstadt (IRT) in Darmstadt on April 24, 1978. The lectures are an account of work performed at IRT on the mechanics of fuel pins and fuel elements and supported by the Fast Breeder Project (PSB) of KfK. These activities can be broken down into studies of the integral fuel pin (URANUS computer code) and into multidimensional studies of the fuel pin using the finite-element method (FINEL and ZIDRIG computer codes). Moreover, a report is presented of the status of the test facility for simulation of out-of-pile cladding tube loads and of the IRT project on the simulation and analysis of radiation damage. (orig./GL) [de

Use of a Scale Model in the Design of Modifications to the NASA Glenn Icing Research Tunnel

Science.gov (United States)

Canacci, Victor A.; Gonsalez, Jose C.; Spera, David A.; Burke, Thomas (Technical Monitor)

2001-01-01

Major modifications were made in 1999 to the 6- by 9-Foot (1.8- by 2.7-m) Icing Research tunnel (IRT) at the NASA Glenn Research Center, including replacement of its heat exchanger and associated ducts and turning vanes, and the addition of fan outlet guide vanes (OGV's). A one-tenth scale model of the IRT (designated as the SMIRT) was constructed with and without these modifications and tested to increase confidence in obtaining expected improvements in flow quality around the tunnel loop. The SMIRT is itself an aerodynamic test facility whose flow patterns without modifications have been shown to be accurate, scaled representations of those measured in the IRT prior to the 1999 upgrade program. In addition, tests in the SMIRT equipped with simulated OGV's indicated that these devices in the IRT might reduce flow distortions immediately downstream of the fan by two thirds. Flow quality parameters measured in the SMIRT were projected to the full-size modified IRT, and quantitative estimates of improvements in flow quality were given prior to construction. In this paper, the results of extensive flow quality studies conducted in the SMIRT are documented. Samples of these are then compared with equivalent measurements made in the full-scale IRT, both before and after its configuration was upgraded. Airspeed, turbulence intensity, and flow angularity distributions are presented for cross sections downstream of the drive fan, both upstream and downstream of the replacement flat heat exchanger, in the stilling chamber, in the test section, and in the wakes of the new comer turning vanes with their unique expanding and contracting designs. Lessons learned from these scale-model studies are discussed.

An Investigation of Invariance Properties of One, Two and Three Parameter Logistic Item Response Theory Models

Directory of Open Access Journals (Sweden)

O.A. Awopeju

2017-12-01

Full Text Available The study investigated the invariance properties of one, two and three parame-ter logistic item response theory models. It examined the best fit among one parameter logistic (1PL, two-parameter logistic (2PL and three-parameter logistic (3PL IRT models for SSCE, 2008 in Mathematics. It also investigated the degree of invariance of the IRT models based item difficulty parameter estimates in SSCE in Mathematics across different samples of examinees and examined the degree of invariance of the IRT models based item discrimination estimates in SSCE in Mathematics across different samples of examinees. In order to achieve the set objectives, 6000 students (3000 males and 3000 females were drawn from the population of 35262 who wrote the 2008 paper 1 Senior Secondary Certificate Examination (SSCE in Mathematics organized by National Examination Council (NECO. The item difficulty and item discrimination parameter estimates from CTT and IRT were tested for invariance using BLOG MG 3 and correlation analysis was achieved using SPSS version 20. The research findings were that two parameter model IRT item difficulty and discrimination parameter estimates exhibited invariance property consistently across different samples and that 2-parameter model was suitable for all samples of examinees unlike one-parameter model and 3-parameter model.

Using item response theory to investigate the structure of anticipated affect: do self-reports about future affective reactions conform to typical or maximal models?

Science.gov (United States)

Zampetakis, Leonidas A; Lerakis, Manolis; Kafetsios, Konstantinos; Moustakis, Vassilis

2015-01-01

In the present research, we used item response theory (IRT) to examine whether effective predictions (anticipated affect) conforms to a typical (i.e., what people usually do) or a maximal behavior process (i.e., what people can do). The former, correspond to non-monotonic ideal point IRT models, whereas the latter correspond to monotonic dominance IRT models. A convenience, cross-sectional student sample (N = 1624) was used. Participants were asked to report on anticipated positive and negative affect around a hypothetical event (emotions surrounding the start of a new business). We carried out analysis comparing graded response model (GRM), a dominance IRT model, against generalized graded unfolding model, an unfolding IRT model. We found that the GRM provided a better fit to the data. Findings suggest that the self-report responses to anticipated affect conform to dominance response process (i.e., maximal behavior). The paper also discusses implications for a growing literature on anticipated affect.

Using item response theory to investigate the structure of anticipated affect: Do self-reports about future affective reactions conform to typical or maximal models?

Directory of Open Access Journals (Sweden)

Leonidas A Zampetakis

2015-09-01

Full Text Available In the present research we used item response theory (IRT to examine whether effective predictions (anticipated affect conforms to a typical (i.e., what people usually do or a maximal behavior process (i.e., what people can do. The former, correspond to non-monotonic ideal point IRT models whereas the latter correspond to monotonic dominance IRT models. A convenience, cross-sectional student sample (N=1624 was used. Participants were asked to report on anticipated positive and negative affect around a hypothetical event (emotions surrounding the start of a new business. We carried out analysis comparing Graded Response Model (GRM, a dominance IRT model, against Generalized Graded Unfolding Model (GGUM, an unfolding IRT model. We found that the GRM provided a better fit to the data. Findings suggest that the self-report responses to anticipated affect conform to dominance response process (i.e. maximal behavior. The paper also discusses implications for a growing literature on anticipated affect.

Management and inspection of integrity of spent fuel from IRT MEPhI research reactor

International Nuclear Information System (INIS)

Aden, V.G.; Bulkin, S.Y.; Sokolov, A.V.; Bushuev, A.V.; Redkin, A.F.; Portnov, A.A.

2002-01-01

The information on wet storage and dry storage of the spent nuclear fuel (SNF) of the IRT MEPhI reactor and experience from SNF shipment for reprocessing are presented. The procedure and a facility for nondestructive inspection of local power density fields and the burnup of fuel assemblies based on studying the γ-activity of some fission products generated in U 235 and procedure for inspection of the fuel element cladding leak tightness are described. (author)

The possibility of creating a new low power nuclear facility with slightly enriched nuclear fuel on the basis of the decommissioned IRT-M reactor intended for applied purposes

International Nuclear Information System (INIS)

Abramidze, Sh.P.; Katamadze, N.M.; Kiknadze, G.G.; Rostomashvili, Z.I.; Saralidze, Z.K.

2002-01-01

Nearly 50 years have passed since the appearance of the first nuclear research reactors. Most of them have completed their operating life and must be dismantled. But it is known that the dismantling of permanently shut down nuclear reactors is a very complex process, full realization that it generates a lot of radioactive waste (both solid and liquid), it is connected with high financial expenditures, and its solution is apparently beyond the possibilities of many countries, including Georgia In the given paper we consider a radiologically safe, ecologically clean and economically beneficial version of the decommissioning of the IRT-M nuclear research reactor and the stages of its implementation that are not connected with the dismantling of its highly radioactive technological components. We justify the possibility of creating a new Low Power Nuclear Facility on the basis of the decommissioned IRT-M reactor to solve the problems of applied nature in different fields of science and technology being very important for Georgia. (author)

MCMC estimation of multidimensional IRT models

NARCIS (Netherlands)

Beguin, Anton; Glas, Cornelis A.W.

1998-01-01

A Bayesian procedure to estimate the three-parameter normal ogive model and a generalization to a model with multidimensional ability parameters are discussed. The procedure is a generalization of a procedure by J. Albert (1992) for estimating the two-parameter normal ogive model. The procedure will

Robust Measurement via A Fused Latent and Graphical Item Response Theory Model.

Science.gov (United States)

Chen, Yunxiao; Li, Xiaoou; Liu, Jingchen; Ying, Zhiliang

2018-03-12

Item response theory (IRT) plays an important role in psychological and educational measurement. Unlike the classical testing theory, IRT models aggregate the item level information, yielding more accurate measurements. Most IRT models assume local independence, an assumption not likely to be satisfied in practice, especially when the number of items is large. Results in the literature and simulation studies in this paper reveal that misspecifying the local independence assumption may result in inaccurate measurements and differential item functioning. To provide more robust measurements, we propose an integrated approach by adding a graphical component to a multidimensional IRT model that can offset the effect of unknown local dependence. The new model contains a confirmatory latent variable component, which measures the targeted latent traits, and a graphical component, which captures the local dependence. An efficient proximal algorithm is proposed for the parameter estimation and structure learning of the local dependence. This approach can substantially improve the measurement, given no prior information on the local dependence structure. The model can be applied to measure both a unidimensional latent trait and multidimensional latent traits.

A Review of the Effects on IRT Item Parameter Estimates with a Focus on Misbehaving Common Items in Test Equating.

Science.gov (United States)

Michaelides, Michalis P

2010-01-01

Many studies have investigated the topic of change or drift in item parameter estimates in the context of item response theory (IRT). Content effects, such as instructional variation and curricular emphasis, as well as context effects, such as the wording, position, or exposure of an item have been found to impact item parameter estimates. The issue becomes more critical when items with estimates exhibiting differential behavior across test administrations are used as common for deriving equating transformations. This paper reviews the types of effects on IRT item parameter estimates and focuses on the impact of misbehaving or aberrant common items on equating transformations. Implications relating to test validity and the judgmental nature of the decision to keep or discard aberrant common items are discussed, with recommendations for future research into more informed and formal ways of dealing with misbehaving common items.

Item selection via Bayesian IRT models.

Science.gov (United States)

Arima, Serena

2015-02-10

With reference to a questionnaire that aimed to assess the quality of life for dysarthric speakers, we investigate the usefulness of a model-based procedure for reducing the number of items. We propose a mixed cumulative logit model, which is known in the psychometrics literature as the graded response model: responses to different items are modelled as a function of individual latent traits and as a function of item characteristics, such as their difficulty and their discrimination power. We jointly model the discrimination and the difficulty parameters by using a k-component mixture of normal distributions. Mixture components correspond to disjoint groups of items. Items that belong to the same groups can be considered equivalent in terms of both difficulty and discrimination power. According to decision criteria, we select a subset of items such that the reduced questionnaire is able to provide the same information that the complete questionnaire provides. The model is estimated by using a Bayesian approach, and the choice of the number of mixture components is justified according to information criteria. We illustrate the proposed approach on the basis of data that are collected for 104 dysarthric patients by local health authorities in Lecce and in Milan. Copyright © 2014 John Wiley & Sons, Ltd.

A Comparison between Linear IRT Observed-Score Equating and Levine Observed-Score Equating under the Generalized Kernel Equating Framework

Science.gov (United States)

Chen, Haiwen

2012-01-01

In this article, linear item response theory (IRT) observed-score equating is compared under a generalized kernel equating framework with Levine observed-score equating for nonequivalent groups with anchor test design. Interestingly, these two equating methods are closely related despite being based on different methodologies. Specifically, when…

Possible use of dual purpose dry storage casks for transportation and future storage of spent nuclear fuel from IRT-Sofia

International Nuclear Information System (INIS)

Manev, L.; Baltiyski, M.

2003-01-01

Objectives: The main objective of the present paper is related to one of the priority goals stipulated in Bulgarian Governmental Decision No.332 from May 17, 1999 - removal of SNF from IRT-Sofia site and its exporting for reprocessing and/or for temporary storage at Kozloduy NPP site. The variant of using dual purpose dry storage casks for transportation and future temporary storage of SNF from IRT-Sofia aims to find out a reasonable alternative of the existing till now variant for temporary SNF storage under water in the existing Kozloduy NPP Spent Fuel Storage Facility until its export for reprocessing. Results: Based on the given data for the condition of 73 Spent Nuclear Fuel Assemblies (SNFA) stored in the storage pool and technical data as well as data for available equipment and IRT-Sofia layout the following framework are specified: draft technical features of dual purpose dry storage casks and their overall dimensions; the suitability of the available equipment for safety and reliable performance of transportation and handling operations of assemblies from storage pool to dual purpose dry storage casks; the necessity of new equipment for performance of the above mentioned operations; Assemblies' transportation and handling operations are described; requirements to and conditions for future safety and reliable storage of SNFA loaded casks are determined. When selecting the technical solutions for safety assurance during performance of site handling operations of IRT-Sofia and for description of the exemplary casks the Effective Bulgarian Regulations are considered. The experience of other countries in performance of transfer and transportation of SNFA from such types of research reactors is taken into account. Also, Kozloduy NPP experience in SNF handling operations is taken into account. Conclusions: The Decision of Council of Minister for refurbishment of research reactor into a low power one and its future utilization for experimental and training

Radiation conditions at the training IRT-2000 and IR-100 reactors

International Nuclear Information System (INIS)

Fedorin, Eh.V.; Bronshtejn, I.Eh; Martynov, Yu.N.; Chistyakov, N.I.

1978-01-01

The experience is reviewed of radiation hygiene surveys and radiation safety provision during instructional processes on two training and research nuclear reactors of the IRT-2000 type (No. 1 and No. 2) and on an IR-200 reactor. From an analysis of individual dosimetry data the conclusion is made that the trainees and personnel are exposed mainly to external gamma-radiation and also, to a minor degree, to thermal neutrons and beta-radiation. It has been found that a high level of radiation safety is ensured on the training and research so that research and instruction activities are conducted at annual levels of exposure substantially lower than 0.5 rem in the case of trainees and 5 rem in the case of personnel

Assessing item fit for unidimensional item response theory models using residuals from estimated item response functions.

Science.gov (United States)

Haberman, Shelby J; Sinharay, Sandip; Chon, Kyong Hee

2013-07-01

Residual analysis (e.g. Hambleton & Swaminathan, Item response theory: principles and applications, Kluwer Academic, Boston, 1985; Hambleton, Swaminathan, & Rogers, Fundamentals of item response theory, Sage, Newbury Park, 1991) is a popular method to assess fit of item response theory (IRT) models. We suggest a form of residual analysis that may be applied to assess item fit for unidimensional IRT models. The residual analysis consists of a comparison of the maximum-likelihood estimate of the item characteristic curve with an alternative ratio estimate of the item characteristic curve. The large sample distribution of the residual is proved to be standardized normal when the IRT model fits the data. We compare the performance of our suggested residual to the standardized residual of Hambleton et al. (Fundamentals of item response theory, Sage, Newbury Park, 1991) in a detailed simulation study. We then calculate our suggested residuals using data from an operational test. The residuals appear to be useful in assessing the item fit for unidimensional IRT models.

Using item response theory to investigate the structure of anticipated affect: do self-reports about future affective reactions conform to typical or maximal models?

OpenAIRE

Zampetakis, Leonidas A.; Lerakis, Manolis; Kafetsios, Konstantinos; Moustakis, Vassilis

2015-01-01

In the present research we used item response theory (IRT) to examine whether effective predictions (anticipated affect) conforms to a typical (i.e., what people usually do) or a maximal behavior process (i.e., what people can do). The former, correspond to non-monotonic ideal point IRT models whereas the latter correspond to monotonic dominance IRT models. A convenience, cross-sectional student sample (N=1624) was used. Participants were asked to report on anticipated positive and negative a...

Potential application of thermography (IRT in animal production and for animal welfare. A case report of working dogs

Directory of Open Access Journals (Sweden)

Veronica Redaelli

2014-06-01

Full Text Available INTRODUCTION. The authors describe the thermography technique in animal production and in veterinary medicine applications. The thermographic technique lends itself to countless applications in biology, thanks to its characteristics of versatility, lack of invasiveness and high sensitivity. Probably the major limitation to most important aspects for its application in the animal lies in the ease of use and in its extreme sensitivity. Materials and methods. This review provides an overview of the possible applications of the technique of thermo visual inspection, but it is clear that every phenomenon connected to temperature variations can be identified with this technique. Then the operator has to identify the best experimental context to obtain as much information as possible, concerning the physiopathological problems considered. Furthermore, we reported an experimental study about the thermography (IRT as a noninvasive technique to assess the state of wellbeing in working dogs. RESULTS. The first results showed the relationship between superficial temperatures and scores obtained by the animal during the behavioral test. This result suggests an interesting application of infrared thermography (IRT to measure the state of wellbeing of animals in a noninvasive way.

Investigation of radial propagation of electrostatic fluctuations in the IR-T1 tokamak plasma edge

Energy Technology Data Exchange (ETDEWEB)

Shariatzadeh, R; Ghoranneviss, M; Salem, M K [Plasma Physics Research Center, Science and Research Branch, Islamic Azad University (IAU), PO Box 14665-678, Tehran (Iran, Islamic Republic of); Emami, M, E-mail: rezashariatzadeh@gmail.com [Laser and Optics Research School, NSTRI, AEOI, PO Box 14155-1339, Tehran (Iran, Islamic Republic of)

2011-01-15

The radial propagation of electrostatic fluctuation is considered extremely important for understanding cross-field anomalous transport. In this paper, two arrays of Langmuir probes are used to analyze electrostatic fluctuations in the edge of IR-T1 tokamak plasma in both the radial and the poloidal directions. The propagation characteristics of the floating potential fluctuations are analyzed by the two-point correlation technique. The wavenumber spectrum shows that there is a net radially outward propagation of turbulent fluctuations in the edge and scrape-off layer (SOL) regions. Hence, edge turbulence presumably originates from core fluctuations.

Investigation of radial propagation of electrostatic fluctuations in the IR-T1 tokamak plasma edge

International Nuclear Information System (INIS)

Shariatzadeh, R; Ghoranneviss, M; Salem, M K; Emami, M

2011-01-01

The radial propagation of electrostatic fluctuation is considered extremely important for understanding cross-field anomalous transport. In this paper, two arrays of Langmuir probes are used to analyze electrostatic fluctuations in the edge of IR-T1 tokamak plasma in both the radial and the poloidal directions. The propagation characteristics of the floating potential fluctuations are analyzed by the two-point correlation technique. The wavenumber spectrum shows that there is a net radially outward propagation of turbulent fluctuations in the edge and scrape-off layer (SOL) regions. Hence, edge turbulence presumably originates from core fluctuations.

The Experience of Storage and Shipment for Reprocessing of HEU Nuclear Fuel Irradiated in the IRT-M Research Reactor and Pamir-630 Mobile Reactor

Energy Technology Data Exchange (ETDEWEB)

Sikorin, S. N.; Polazau, S. A.; Luneu, A. N.; Hrigarovich, T. K. [Joint Institute for Power and Nuclear Research–Sosny of the National Academy of Sciences of Belarus, Minsk (Belarus)

2014-08-15

At the end of 2010 under the Global Threat Reduction Initiative (GTRI), the Joint Institute for Power and Nuclear Research–“Sosny” (JIPNR–Sosny) of the National Academy of Sciences of the Republic of Belarus repatriated HEU spent nuclear fuel to the Russian Federation. The spent nuclear fuel was from the decommissioned Pamir-630D mobile reactor and IRT-M research reactor. The paper discusses the Pamir-630D spent nuclear fuel; experience and problems of spent nuclear fuel storage; and various aspects of the shipment including legal framework, preparation activities and shipment logistics. The conceptual project of a new research reactor for Belarus is also presented.

A signal detection-item response theory model for evaluating neuropsychological measures.

Science.gov (United States)

Thomas, Michael L; Brown, Gregory G; Gur, Ruben C; Moore, Tyler M; Patt, Virginie M; Risbrough, Victoria B; Baker, Dewleen G

2018-02-05

Models from signal detection theory are commonly used to score neuropsychological test data, especially tests of recognition memory. Here we show that certain item response theory models can be formulated as signal detection theory models, thus linking two complementary but distinct methodologies. We then use the approach to evaluate the validity (construct representation) of commonly used research measures, demonstrate the impact of conditional error on neuropsychological outcomes, and evaluate measurement bias. Signal detection-item response theory (SD-IRT) models were fitted to recognition memory data for words, faces, and objects. The sample consisted of U.S. Infantry Marines and Navy Corpsmen participating in the Marine Resiliency Study. Data comprised item responses to the Penn Face Memory Test (PFMT; N = 1,338), Penn Word Memory Test (PWMT; N = 1,331), and Visual Object Learning Test (VOLT; N = 1,249), and self-report of past head injury with loss of consciousness. SD-IRT models adequately fitted recognition memory item data across all modalities. Error varied systematically with ability estimates, and distributions of residuals from the regression of memory discrimination onto self-report of past head injury were positively skewed towards regions of larger measurement error. Analyses of differential item functioning revealed little evidence of systematic bias by level of education. SD-IRT models benefit from the measurement rigor of item response theory-which permits the modeling of item difficulty and examinee ability-and from signal detection theory-which provides an interpretive framework encompassing the experimentally validated constructs of memory discrimination and response bias. We used this approach to validate the construct representation of commonly used research measures and to demonstrate how nonoptimized item parameters can lead to erroneous conclusions when interpreting neuropsychological test data. Future work might include the

Modeling Math Growth Trajectory--An Application of Conventional Growth Curve Model and Growth Mixture Model to ECLS K-5 Data

Science.gov (United States)

Lu, Yi

2016-01-01

To model students' math growth trajectory, three conventional growth curve models and three growth mixture models are applied to the Early Childhood Longitudinal Study Kindergarten-Fifth grade (ECLS K-5) dataset in this study. The results of conventional growth curve model show gender differences on math IRT scores. When holding socio-economic…

Analysis test of understanding of vectors with the three-parameter logistic model of item response theory and item response curves technique

Directory of Open Access Journals (Sweden)

Suttida Rakkapao

2016-10-01

Full Text Available This study investigated the multiple-choice test of understanding of vectors (TUV, by applying item response theory (IRT. The difficulty, discriminatory, and guessing parameters of the TUV items were fit with the three-parameter logistic model of IRT, using the parscale program. The TUV ability is an ability parameter, here estimated assuming unidimensionality and local independence. Moreover, all distractors of the TUV were analyzed from item response curves (IRC that represent simplified IRT. Data were gathered on 2392 science and engineering freshmen, from three universities in Thailand. The results revealed IRT analysis to be useful in assessing the test since its item parameters are independent of the ability parameters. The IRT framework reveals item-level information, and indicates appropriate ability ranges for the test. Moreover, the IRC analysis can be used to assess the effectiveness of the test’s distractors. Both IRT and IRC approaches reveal test characteristics beyond those revealed by the classical analysis methods of tests. Test developers can apply these methods to diagnose and evaluate the features of items at various ability levels of test takers.

Analysis test of understanding of vectors with the three-parameter logistic model of item response theory and item response curves technique

Science.gov (United States)

Rakkapao, Suttida; Prasitpong, Singha; Arayathanitkul, Kwan

2016-12-01

This study investigated the multiple-choice test of understanding of vectors (TUV), by applying item response theory (IRT). The difficulty, discriminatory, and guessing parameters of the TUV items were fit with the three-parameter logistic model of IRT, using the parscale program. The TUV ability is an ability parameter, here estimated assuming unidimensionality and local independence. Moreover, all distractors of the TUV were analyzed from item response curves (IRC) that represent simplified IRT. Data were gathered on 2392 science and engineering freshmen, from three universities in Thailand. The results revealed IRT analysis to be useful in assessing the test since its item parameters are independent of the ability parameters. The IRT framework reveals item-level information, and indicates appropriate ability ranges for the test. Moreover, the IRC analysis can be used to assess the effectiveness of the test's distractors. Both IRT and IRC approaches reveal test characteristics beyond those revealed by the classical analysis methods of tests. Test developers can apply these methods to diagnose and evaluate the features of items at various ability levels of test takers.

Nirex methodology for scenario and conceptual model development. An international peer review

International Nuclear Information System (INIS)

1999-06-01

Nirex has responsibilities for nuclear waste management in the UK. The company's top level objectives are to maintain technical credibility on deep disposal, to gain public acceptance for a deep geologic repository, and to provide relevant advice to customers on the safety implications of their waste packaging proposals. Nirex utilizes peer reviews as appropriate to keep its scientific tools up-to-date and to periodically verify the quality of its products. The NEA formed an International Review Team (IRT) consisting of four internationally recognised experts plus a member of the NEA Secretariat. The IRT performed an in-depth analysis of five Nirex scientific reports identified in the terms of reference of the review. The review was to primarily judge whether the Nirex methodology provides an adequate framework to support the building of a future licensing safety case. Another objective was to judge whether the methodology could aid in establishing a better understanding, and, ideally, enhance acceptance of a repository among stakeholders. Methodologies for conducting safety assessments include at a very basic level the identification of features, events, and processes (FEPs) relevant to the system at hand, their convolution in scenarios for analysis, and the formulation of conceptual models to be addressed through numerical modelling. The main conclusion of the IRT is that Nirex has developed a potentially sound methodology for the identification and analysis of FEPs and for the identification of conceptual model needs and model requirements. The work is still in progress and is not yet complete. (R.P.)

A Model Fit Statistic for Generalized Partial Credit Model

Science.gov (United States)

Liang, Tie; Wells, Craig S.

2009-01-01

Investigating the fit of a parametric model is an important part of the measurement process when implementing item response theory (IRT), but research examining it is limited. A general nonparametric approach for detecting model misfit, introduced by J. Douglas and A. S. Cohen (2001), has exhibited promising results for the two-parameter logistic…

Assessment of health surveys: fitting a multidimensional graded response model.

Science.gov (United States)

Depaoli, Sarah; Tiemensma, Jitske; Felt, John M

The multidimensional graded response model, an item response theory (IRT) model, can be used to improve the assessment of surveys, even when sample sizes are restricted. Typically, health-based survey development utilizes classical statistical techniques (e.g. reliability and factor analysis). In a review of four prominent journals within the field of Health Psychology, we found that IRT-based models were used in less than 10% of the studies examining scale development or assessment. However, implementing IRT-based methods can provide more details about individual survey items, which is useful when determining the final item content of surveys. An example using a quality of life survey for Cushing's syndrome (CushingQoL) highlights the main components for implementing the multidimensional graded response model. Patients with Cushing's syndrome (n = 397) completed the CushingQoL. Results from the multidimensional graded response model supported a 2-subscale scoring process for the survey. All items were deemed as worthy contributors to the survey. The graded response model can accommodate unidimensional or multidimensional scales, be used with relatively lower sample sizes, and is implemented in free software (example code provided in online Appendix). Use of this model can help to improve the quality of health-based scales being developed within the Health Sciences.

Analysis Test of Understanding of Vectors with the Three-Parameter Logistic Model of Item Response Theory and Item Response Curves Technique

Science.gov (United States)

Rakkapao, Suttida; Prasitpong, Singha; Arayathanitkul, Kwan

2016-01-01

This study investigated the multiple-choice test of understanding of vectors (TUV), by applying item response theory (IRT). The difficulty, discriminatory, and guessing parameters of the TUV items were fit with the three-parameter logistic model of IRT, using the parscale program. The TUV ability is an ability parameter, here estimated assuming…

Improving ability measurement in surveys by following the principles of IRT: The Wordsum vocabulary test in the General Social Survey.

Science.gov (United States)

Cor, M Ken; Haertel, Edward; Krosnick, Jon A; Malhotra, Neil

2012-09-01

Survey researchers often administer batteries of questions to measure respondents' abilities, but these batteries are not always designed in keeping with the principles of optimal test construction. This paper illustrates one instance in which following these principles can improve a measurement tool used widely in the social and behavioral sciences: the GSS's vocabulary test called "Wordsum". This ten-item test is composed of very difficult items and very easy items, and item response theory (IRT) suggests that the omission of moderately difficult items is likely to have handicapped Wordsum's effectiveness. Analyses of data from national samples of thousands of American adults show that after adding four moderately difficult items to create a 14-item battery, "Wordsumplus" (1) outperformed the original battery in terms of quality indicators suggested by classical test theory; (2) reduced the standard error of IRT ability estimates in the middle of the latent ability dimension; and (3) exhibited higher concurrent validity. These findings show how to improve Wordsum and suggest that analysts should use a score based on all 14 items instead of using the summary score provided by the GSS, which is based on only the original 10 items. These results also show more generally how surveys measuring abilities (and other constructs) can benefit from careful application of insights from the contemporary educational testing literature. Copyright © 2012 Elsevier Inc. All rights reserved.

Cognitive psychology meets psychometric theory: on the relation between process models for decision making and latent variable models for individual differences

NARCIS (Netherlands)

van der Maas, H.L.J.; Molenaar, D.; Maris, G.; Kievit, R.A.; Borsboom, D.

2011-01-01

This article analyzes latent variable models from a cognitive psychology perspective. We start by discussing work by Tuerlinckx and De Boeck (2005), who proved that a diffusion model for 2-choice response processes entails a 2-parameter logistic item response theory (IRT) model for individual

Designing a Sine-Coil for Measurement of Plasma Displacements in IR-T1 Tokamak

International Nuclear Information System (INIS)

Khorshid, Pejman; Razavi, M.; Molaii, M.; Ghoranneviss, M.; TalebiTaher, A.; Arvin, R.; Mohammadi, S.; NikMohammadi, A.

2008-01-01

A method for the measurement of the plasma position in the IR-T1 tokamak in toroidal coordinates is developed. A sine-coil, which is a Rogowski coil with a variable wiring density is designed and fabricated for this purpose. An analytic solution of the Biot-Savart law, which is used to calculate magnetic fields created by toroidal plasma current, is presented. Results of calculations are compared with the experimental data obtained in no-plasma shots with a toroidal current-carrying coil positioned inside the vessel to simulate the plasma movements. The results are shown a good linear behavior of plasma position measurements. The error is less than 2.5% and it is compared with other methods of measurements of the plasma position. This method will be used in the feedback position control system and tests of feedback controller parameters are ongoing

General mixture item response models with different item response structures: Exposition with an application to Likert scales.

Science.gov (United States)

Tijmstra, Jesper; Bolsinova, Maria; Jeon, Minjeong

2018-01-10

This article proposes a general mixture item response theory (IRT) framework that allows for classes of persons to differ with respect to the type of processes underlying the item responses. Through the use of mixture models, nonnested IRT models with different structures can be estimated for different classes, and class membership can be estimated for each person in the sample. If researchers are able to provide competing measurement models, this mixture IRT framework may help them deal with some violations of measurement invariance. To illustrate this approach, we consider a two-class mixture model, where a person's responses to Likert-scale items containing a neutral middle category are either modeled using a generalized partial credit model, or through an IRTree model. In the first model, the middle category ("neither agree nor disagree") is taken to be qualitatively similar to the other categories, and is taken to provide information about the person's endorsement. In the second model, the middle category is taken to be qualitatively different and to reflect a nonresponse choice, which is modeled using an additional latent variable that captures a person's willingness to respond. The mixture model is studied using simulation studies and is applied to an empirical example.

Non-ignorable missingness item response theory models for choice effects in examinee-selected items.

Science.gov (United States)

Liu, Chen-Wei; Wang, Wen-Chung

2017-11-01

Examinee-selected item (ESI) design, in which examinees are required to respond to a fixed number of items in a given set, always yields incomplete data (i.e., when only the selected items are answered, data are missing for the others) that are likely non-ignorable in likelihood inference. Standard item response theory (IRT) models become infeasible when ESI data are missing not at random (MNAR). To solve this problem, the authors propose a two-dimensional IRT model that posits one unidimensional IRT model for observed data and another for nominal selection patterns. The two latent variables are assumed to follow a bivariate normal distribution. In this study, the mirt freeware package was adopted to estimate parameters. The authors conduct an experiment to demonstrate that ESI data are often non-ignorable and to determine how to apply the new model to the data collected. Two follow-up simulation studies are conducted to assess the parameter recovery of the new model and the consequences for parameter estimation of ignoring MNAR data. The results of the two simulation studies indicate good parameter recovery of the new model and poor parameter recovery when non-ignorable missing data were mistakenly treated as ignorable. © 2017 The British Psychological Society.

Robustness of the charge-ordered phases in IrTe2 against photoexcitation

Science.gov (United States)

Monney, C.; Schuler, A.; Jaouen, T.; Mottas, M.-L.; Wolf, Th.; Merz, M.; Muntwiler, M.; Castiglioni, L.; Aebi, P.; Weber, F.; Hengsberger, M.

2018-02-01

We present a time-resolved angle-resolved photoelectron spectroscopy study of IrTe2, which undergoes two first-order structural and charge-ordered phase transitions on cooling below 270 K and below 180 K. The possibility of inducing a phase transition by photoexcitation with near-infrared femtosecond pulses is investigated in the charge-ordered phases. We observe changes of the spectral function occurring within a few hundreds of femtoseconds and persisting up to several picoseconds, which we interpret as a partial photoinduced phase transition (PIPT). The necessary time for photoinducing these spectral changes increases with increasing photoexcitation density and reaches time scales longer than the rise time of the transient electronic temperature. We conclude that the PIPT is driven by a transient increase of the lattice temperature following the energy transfer from the electrons. However, the photoinduced changes of the spectral function are small, which indicates that the low-temperature phase is particularly robust against photoexcitation. We suggest that the system might be trapped in an out-of-equilibrium state, for which only a partial structural transition is achieved.

Approaching the Type-II Dirac Point and Concomitant Superconductivity in Pt-doping Stabilized Metastable 1T-phase IrTe2

OpenAIRE

Fei, Fucong; Bo, Xiangyan; Wang, Pengdong; Ying, Jianghua; Chen, Bo; Liu, Qianqian; Zhang, Yong; Sun, Zhe; Qu, Fanming; Zhang, Yi; Li, Jian; Song, Fengqi; Wan, Xiangang; Wang, Baigeng; Wang, Guanghou

2017-01-01

Topological semimetal is a topic of general interest in material science. Recently, a new kind of topological semimetal called type-II Dirac semimetal with tilted Dirac cones is discovered in PtSe2 family. However, the further investigation is hindered due to the huge energy difference from Dirac points to Fermi level and the irrelevant conducting pockets at Fermi surface. Here we characterize the optimized type-II Dirac dispersions in a metastable 1T phase of IrTe2. Our strategy of Pt doping...

Evaluation of the Hospital Anxiety and Depression Scale (HADS) in screening stroke patients for symptoms: Item Response Theory (IRT) analysis.

Science.gov (United States)

Ayis, Salma A; Ayerbe, Luis; Ashworth, Mark; DA Wolfe, Charles

2018-03-01

Variations have been reported in the number of underlying constructs and choice of thresholds that determine caseness of anxiety and /or depression using the Hospital Anxiety and Depression scale (HADS). This study examined the properties of each item of HADS as perceived by stroke patients, and assessed the information these items convey about anxiety and depression between 3 months to 5 years after stroke. The study included 1443 stroke patients from the South London Stroke Register (SLSR). The dimensionality of HADS was examined using factor analysis methods, and items' properties up to 5 years after stroke were tested using Item Response Theory (IRT) methods, including graded response models (GRMs). The presence of two dimensions of HADS (anxiety and depression) for stroke patients was confirmed. Items that accurately inferred about the severity of anxiety and depression, and offered good discrimination of caseness were identified as "I can laugh and see the funny side of things" (Q4) and "I get sudden feelings of panic" (Q13), discrimination 2.44 (se = 0.26), and 3.34 (se = 0.35), respectively. Items that shared properties, hence replicate inference were: "I get a sort of frightened feeling as if something awful is about to happen" (Q3), "I get a sort of frightened feeling like butterflies in my stomach" (Q6), and "Worrying thoughts go through my mind" (Q9). Item properties were maintained over time. Approximately 20% of patients were lost to follow up. A more concise selection of items based on their properties, would provide a precise approach for screening patients and for an optimal allocation of patients into clinical trials. Copyright © 2017 Elsevier B.V. All rights reserved.

Bayesian modeling of measurement error in predictor variables

NARCIS (Netherlands)

Fox, Gerardus J.A.; Glas, Cornelis A.W.

2003-01-01

It is shown that measurement error in predictor variables can be modeled using item response theory (IRT). The predictor variables, that may be defined at any level of an hierarchical regression model, are treated as latent variables. The normal ogive model is used to describe the relation between

An empirical comparison of Item Response Theory and Classical Test Theory

Directory of Open Access Journals (Sweden)

Špela Progar

2008-11-01

Full Text Available Based on nonlinear models between the measured latent variable and the item response, item response theory (IRT enables independent estimation of item and person parameters and local estimation of measurement error. These properties of IRT are also the main theoretical advantages of IRT over classical test theory (CTT. Empirical evidence, however, often failed to discover consistent differences between IRT and CTT parameters and between invariance measures of CTT and IRT parameter estimates. In this empirical study a real data set from the Third International Mathematics and Science Study (TIMSS 1995 was used to address the following questions: (1 How comparable are CTT and IRT based item and person parameters? (2 How invariant are CTT and IRT based item parameters across different participant groups? (3 How invariant are CTT and IRT based item and person parameters across different item sets? The findings indicate that the CTT and the IRT item/person parameters are very comparable, that the CTT and the IRT item parameters show similar invariance property when estimated across different groups of participants, that the IRT person parameters are more invariant across different item sets, and that the CTT item parameters are at least as much invariant in different item sets as the IRT item parameters. The results furthermore demonstrate that, with regards to the invariance property, IRT item/person parameters are in general empirically superior to CTT parameters, but only if the appropriate IRT model is used for modelling the data.

An Introduction to the DA-T Gibbs Sampler for the Two-Parameter Logistic (2PL Model and Beyond

Directory of Open Access Journals (Sweden)

Gunter Maris

2005-01-01

Full Text Available The DA-T Gibbs sampler is proposed by Maris and Maris (2002 as a Bayesian estimation method for a wide variety of Item Response Theory (IRT models. The present paper provides an expository account of the DAT Gibbs sampler for the 2PL model. However, the scope is not limited to the 2PL model. It is demonstrated how the DA-T Gibbs sampler for the 2PL may be used to build, quite easily, Gibbs samplers for other IRT models. Furthermore, the paper contains a novel, intuitive derivation of the Gibbs sampler and could be read for a graduate course on sampling.

Structure of chaotic magnetic field lines in IR-T1 tokamak due to ergodic magnetic limiter

Science.gov (United States)

Ahmadi, S.; Salar Elahi, A.; Ghorannevis, M.

2018-03-01

In this paper we have studied an Ergodic Magnetic Limiter (EML) based chaotic magnetic field for transport control in the edge plasma of IR-T1 tokamak. The resonance created by the EML causes perturbation of the equilibrium field line in tokamak and as a result, the field lines are chaotic in the vicinity of the dimerized island chains. Transport barriers are formed in the chaotic field line and actually observe in tokamak with reverse magnetic shear. We used area-preserving non-twist (and twist) Poincaré maps to describe the formation of transport barriers, which are actually features of Hamiltonian systems. This transport barrier is useful in reducing radial diffusion of the field line and thus improving the plasma confinement.

Structure of chaotic magnetic field lines in IR-T1 tokamak due to ergodic magnetic limiter

Directory of Open Access Journals (Sweden)

S. Ahmadi

2018-03-01

Full Text Available In this paper we have studied an Ergodic Magnetic Limiter (EML based chaotic magnetic field for transport control in the edge plasma of IR-T1 tokamak. The resonance created by the EML causes perturbation of the equilibrium field line in tokamak and as a result, the field lines are chaotic in the vicinity of the dimerized island chains. Transport barriers are formed in the chaotic field line and actually observe in tokamak with reverse magnetic shear. We used area-preserving non-twist (and twist Poincaré maps to describe the formation of transport barriers, which are actually features of Hamiltonian systems. This transport barrier is useful in reducing radial diffusion of the field line and thus improving the plasma confinement.

Modern psychometrics applied in rheumatology--a systematic review.

Science.gov (United States)

Siemons, Liseth; Ten Klooster, Peter M; Taal, Erik; Glas, Cees Aw; Van de Laar, Mart Afj

2012-10-31

Although item response theory (IRT) appears to be increasingly used within health care research in general, a comprehensive overview of the frequency and characteristics of IRT analyses within the rheumatic field is lacking. An overview of the use and application of IRT in rheumatology to date may give insight into future research directions and highlight new possibilities for the improvement of outcome assessment in rheumatic conditions. Therefore, this study systematically reviewed the application of IRT to patient-reported and clinical outcome measures in rheumatology. Literature searches in PubMed, Scopus and Web of Science resulted in 99 original English-language articles which used some form of IRT-based analysis of patient-reported or clinical outcome data in patients with a rheumatic condition. Both general study information and IRT-specific information were assessed. Most studies used Rasch modeling for developing or evaluating new or existing patient-reported outcomes in rheumatoid arthritis or osteoarthritis patients. Outcomes of principle interest were physical functioning and quality of life. Since the last decade, IRT has also been applied to clinical measures more frequently. IRT was mostly used for evaluating model fit, unidimensionality and differential item functioning, the distribution of items and persons along the underlying scale, and reliability. Less frequently used IRT applications were the evaluation of local independence, the threshold ordering of items, and the measurement precision along the scale. IRT applications have markedly increased within rheumatology over the past decades. To date, IRT has primarily been applied to patient-reported outcomes, however, applications to clinical measures are gaining interest. Useful IRT applications not yet widely used within rheumatology include the cross-calibration of instrument scores and the development of computerized adaptive tests which may reduce the measurement burden for both the patient

Plasma column displacement measurements by modified Rogowski sine-coil and Biot-Savart/magnetic flux equation solution on IR-T1 tokamak

International Nuclear Information System (INIS)

Razavi, M.; Mollai, M.; Khorshid, P.; Nedzelskiy, I.; Ghoranneviss, M.

2010-01-01

The modified Rogowski sine-coil (MRSC) has been designed and implemented for the plasma column horizontal displacement measurements on small IR-T1 tokamak. MRSC operation has been examined on test assembly and tokamak. Obtained results show high sensitivity to the plasma column horizontal displacement and negligible sensitivity to the vertical displacement; linearity in wide, ±0.1 m, range of the displacements; and excellent, 1.5%, agreement with the results of numerical solution of Biot-Savart and magnetic flux equations.

Determination of a Differential Item Functioning Procedure Using the Hierarchical Generalized Linear Model

Directory of Open Access Journals (Sweden)

Tülin Acar

2012-01-01

Full Text Available The aim of this research is to compare the result of the differential item functioning (DIF determining with hierarchical generalized linear model (HGLM technique and the results of the DIF determining with logistic regression (LR and item response theory–likelihood ratio (IRT-LR techniques on the test items. For this reason, first in this research, it is determined whether the students encounter DIF with HGLM, LR, and IRT-LR techniques according to socioeconomic status (SES, in the Turkish, Social Sciences, and Science subtest items of the Secondary School Institutions Examination. When inspecting the correlations among the techniques in terms of determining the items having DIF, it was discovered that there was significant correlation between the results of IRT-LR and LR techniques in all subtests; merely in Science subtest, the results of the correlation between HGLM and IRT-LR techniques were found significant. DIF applications can be made on test items with other DIF analysis techniques that were not taken to the scope of this research. The analysis results, which were determined by using the DIF techniques in different sample sizes, can be compared.

Reconstructing the Roman Site “Aquis Querquennis” (Bande, Spain from GPR, T-LiDAR and IRT Data Fusion

Directory of Open Access Journals (Sweden)

Iván Puente

2018-03-01

Full Text Available This work presents the three-dimensional (3D reconstruction of one of the most important archaeological sites in Galicia: “Aquis Querquennis” (Bande, Spain using in-situ non-invasive ground-penetrating radar (GPR and Terrestrial Light Detection and Ranging (T-LiDAR techniques, complemented with infrared thermography. T-LiDAR is used for the recording of the 3D surface of this particular case and provides high resolution 3D digital models. GPR data processing is performed through the novel software tool “toGPRi”, developed by the authors, which allows the creation of a 3D model of the sub-surface and the subsequent XY images or time-slices at different depths. All these products are georeferenced, in such a way that the GPR orthoimages can be combined with the orthoimages from the T-LiDAR for a complete interpretation of the site. In this way, the GPR technique allows for the detection of the structures of the barracks that are buried, and their distribution is completed with the structure measured by the T-LiDAR on the surface. In addition, the detection of buried elements made possible the identification and labelling of the structures of the surface and their uses. These structures are additionally inspected with infrared thermography (IRT to determine their conservation condition and distinguish between original and subsequent constructions.

Item response theory analysis of Centers for Disease Control and Prevention Health-Related Quality of Life (CDC HRQOL) items in adults with arthritis.

Science.gov (United States)

Mielenz, Thelma J; Callahan, Leigh F; Edwards, Michael C

2016-03-12

Examine the feasibility of performing an item response theory (IRT) analysis on two of the Centers for Disease Control and Prevention health-related quality of life (CDC HRQOL) modules - the 4-item Healthy Days Core Module (HDCM) and the 5-item Healthy days Symptoms Module (HDSM). Previous principal components analyses confirm that the two scales both assess a mix of mental (CDC-MH) and physical health (CDC-PH). The purpose is to conduct item response theory (IRT) analysis on the CDC-MH and CDC-PH scales separately. 2182 patients with self-reported or physician-diagnosed arthritis completed a cross-sectional survey including HDCM and HDSM items. Besides global health, the other 8 items ask the number of days that some statement was true; we chose to recode the data into 8 categories based on observed clustering. The IRT assumptions were assessed using confirmatory factor analysis and the data could be modeled using an unidimensional IRT model. The graded response model was used for IRT analyses and CDC-MH and CDC-PH scales were analyzed separately in flexMIRT. The IRT parameter estimates for the five-item CDC-PH all appeared reasonable. The three-item CDC-MH did not have reasonable parameter estimates. The CDC-PH scale is amenable to IRT analysis but the existing The CDC-MH scale is not. We suggest either using the 4-item Healthy Days Core Module (HDCM) and the 5-item Healthy days Symptoms Module (HDSM) as they currently stand or the CDC-PH scale alone if the primary goal is to measure physical health related HRQOL.

A mixed-binomial model for Likert-type personality measures.

Science.gov (United States)

Allik, Jüri

2014-01-01

Personality measurement is based on the idea that values on an unobservable latent variable determine the distribution of answers on a manifest response scale. Typically, it is assumed in the Item Response Theory (IRT) that latent variables are related to the observed responses through continuous normal or logistic functions, determining the probability with which one of the ordered response alternatives on a Likert-scale item is chosen. Based on an analysis of 1731 self- and other-rated responses on the 240 NEO PI-3 questionnaire items, it was proposed that a viable alternative is a finite number of latent events which are related to manifest responses through a binomial function which has only one parameter-the probability with which a given statement is approved. For the majority of items, the best fit was obtained with a mixed-binomial distribution, which assumes two different subpopulations who endorse items with two different probabilities. It was shown that the fit of the binomial IRT model can be improved by assuming that about 10% of random noise is contained in the answers and by taking into account response biases toward one of the response categories. It was concluded that the binomial response model for the measurement of personality traits may be a workable alternative to the more habitual normal and logistic IRT models.

Fitting measurement models to vocational interest data: are dominance models ideal?

Science.gov (United States)

Tay, Louis; Drasgow, Fritz; Rounds, James; Williams, Bruce A

2009-09-01

In this study, the authors examined the item response process underlying 3 vocational interest inventories: the Occupational Preference Inventory (C.-P. Deng, P. I. Armstrong, & J. Rounds, 2007), the Interest Profiler (J. Rounds, T. Smith, L. Hubert, P. Lewis, & D. Rivkin, 1999; J. Rounds, C. M. Walker, et al., 1999), and the Interest Finder (J. E. Wall & H. E. Baker, 1997; J. E. Wall, L. L. Wise, & H. E. Baker, 1996). Item response theory (IRT) dominance models, such as the 2-parameter and 3-parameter logistic models, assume that item response functions (IRFs) are monotonically increasing as the latent trait increases. In contrast, IRT ideal point models, such as the generalized graded unfolding model, have IRFs that peak where the latent trait matches the item. Ideal point models are expected to fit better because vocational interest inventories ask about typical behavior, as opposed to requiring maximal performance. Results show that across all 3 interest inventories, the ideal point model provided better descriptions of the response process. The importance of specifying the correct item response model for precise measurement is discussed. In particular, scores computed by a dominance model were shown to be sometimes illogical: individuals endorsing mostly realistic or mostly social items were given similar scores, whereas scores based on an ideal point model were sensitive to which type of items respondents endorsed.

Cognitive Psychology Meets Psychometric Theory: On the Relation between Process Models for Decision Making and Latent Variable Models for Individual Differences

Science.gov (United States)

van der Maas, Han L. J.; Molenaar, Dylan; Maris, Gunter; Kievit, Rogier A.; Borsboom, Denny

2011-01-01

This article analyzes latent variable models from a cognitive psychology perspective. We start by discussing work by Tuerlinckx and De Boeck (2005), who proved that a diffusion model for 2-choice response processes entails a 2-parameter logistic item response theory (IRT) model for individual differences in the response data. Following this line…

Modern psychometric approaches to analysis of scales for health-related quality of life

DEFF Research Database (Denmark)

Bjorner, Jakob Bue; Bech, Per

2016-01-01

In recent years, much effort has been invested in the development of new instruments for assessment of health-related quality of life (HRQOL). For many new instruments, modern psychometric methods, such as item response theory (IRT) models, have been used, either as supplemental to classical....... The models include Rasch models (Rasch 1980; Fischer and Molenaar 1995), other IRT models (Samejima 1969; van der Linden and Hambleton 1997), and factor analytic models for categorical data (Muthén 1984). “Modern” psychometric methods have actually a rather long history within psychiatric research (both...

The e-MSWS-12: improving the multiple sclerosis walking scale using item response theory.

Science.gov (United States)

Engelhard, Matthew M; Schmidt, Karen M; Engel, Casey E; Brenton, J Nicholas; Patek, Stephen D; Goldman, Myla D

2016-12-01

The Multiple Sclerosis Walking Scale (MSWS-12) is the predominant patient-reported measure of multiple sclerosis (MS) -elated walking ability, yet it had not been analyzed using item response theory (IRT), the emerging standard for patient-reported outcome (PRO) validation. This study aims to reduce MSWS-12 measurement error and facilitate computerized adaptive testing by creating an IRT model of the MSWS-12 and distributing it online. MSWS-12 responses from 284 subjects with MS were collected by mail and used to fit and compare several IRT models. Following model selection and assessment, subpopulations based on age and sex were tested for differential item functioning (DIF). Model comparison favored a one-dimensional graded response model (GRM). This model met fit criteria and explained 87 % of response variance. The performance of each MSWS-12 item was characterized using category response curves (CRCs) and item information. IRT-based MSWS-12 scores correlated with traditional MSWS-12 scores (r = 0.99) and timed 25-foot walk (T25FW) speed (r =  -0.70). Item 2 showed DIF based on age (χ 2  = 19.02, df = 5, p Item 11 showed DIF based on sex (χ 2  = 13.76, df = 5, p = 0.02). MSWS-12 measurement error depends on walking ability, but could be lowered by improving or replacing items with low information or DIF. The e-MSWS-12 includes IRT-based scoring, error checking, and an estimated T25FW derived from MSWS-12 responses. It is available at https://ms-irt.shinyapps.io/e-MSWS-12 .

IRTPRO 2.1 for Windows (Item Response Theory for Patient-Reported Outcomes)

Science.gov (United States)

Paek, Insu; Han, Kyung T.

2013-01-01

This article reviews a new item response theory (IRT) model estimation program, IRTPRO 2.1, for Windows that is capable of unidimensional and multidimensional IRT model estimation for existing and user-specified constrained IRT models for dichotomously and polytomously scored item response data. (Contains 1 figure and 2 notes.)

A person fit test for IRT models for polytomous items

NARCIS (Netherlands)

Glas, Cornelis A.W.; Dagohoy, A.V.

2007-01-01

A person fit test based on the Lagrange multiplier test is presented for three item response theory models for polytomous items: the generalized partial credit model, the sequential model, and the graded response model. The test can also be used in the framework of multidimensional ability

Assessing the Accuracy and Consistency of Language Proficiency Classification under Competing Measurement Models

Science.gov (United States)

Zhang, Bo

2010-01-01

This article investigates how measurement models and statistical procedures can be applied to estimate the accuracy of proficiency classification in language testing. The paper starts with a concise introduction of four measurement models: the classical test theory (CTT) model, the dichotomous item response theory (IRT) model, the testlet response…

Magnetic evaluation of hydrogen pressures changes on MHD fluctuations in IR-T1 tokamak plasma

Science.gov (United States)

Alipour, Ramin; Ghanbari, Mohamad R.

2018-04-01

Identification of tokamak plasma parameters and investigation on the effects of each parameter on the plasma characteristics is important for the better understanding of magnetohydrodynamic (MHD) activities in the tokamak plasma. The effect of different hydrogen pressures of 1.9, 2.5 and 2.9 Torr on MHD fluctuations of the IR-T1 tokamak plasma was investigated by using of 12 Mirnov coils, singular value decomposition and wavelet analysis. The parameters such as plasma current, loop voltage, power spectrum density, energy percent of poloidal modes, dominant spatial structures and temporal structures of poloidal modes at different plasma pressures are plotted. The results indicate that the MHD activities at the pressure of 2.5 Torr are less than them at other pressures. It also has been shown that in the stable area of plasma and at the pressure of 2.5 Torr, the magnetic force and the force of plasma pressure are in balance with each other and the MHD activities are at their lowest level.

www.common-metrics.org: a web application to estimate scores from different patient-reported outcome measures on a common scale.

Science.gov (United States)

Fischer, H Felix; Rose, Matthias

2016-10-19

Recently, a growing number of Item-Response Theory (IRT) models has been published, which allow estimation of a common latent variable from data derived by different Patient Reported Outcomes (PROs). When using data from different PROs, direct estimation of the latent variable has some advantages over the use of sum score conversion tables. It requires substantial proficiency in the field of psychometrics to fit such models using contemporary IRT software. We developed a web application ( http://www.common-metrics.org ), which allows estimation of latent variable scores more easily using IRT models calibrating different measures on instrument independent scales. Currently, the application allows estimation using six different IRT models for Depression, Anxiety, and Physical Function. Based on published item parameters, users of the application can directly estimate latent trait estimates using expected a posteriori (EAP) for sum scores as well as for specific response patterns, Bayes modal (MAP), Weighted likelihood estimation (WLE) and Maximum likelihood (ML) methods and under three different prior distributions. The obtained estimates can be downloaded and analyzed using standard statistical software. This application enhances the usability of IRT modeling for researchers by allowing comparison of the latent trait estimates over different PROs, such as the Patient Health Questionnaire Depression (PHQ-9) and Anxiety (GAD-7) scales, the Center of Epidemiologic Studies Depression Scale (CES-D), the Beck Depression Inventory (BDI), PROMIS Anxiety and Depression Short Forms and others. Advantages of this approach include comparability of data derived with different measures and tolerance against missing values. The validity of the underlying models needs to be investigated in the future.

Relationships among Classical Test Theory and Item Response Theory Frameworks via Factor Analytic Models

Science.gov (United States)

Kohli, Nidhi; Koran, Jennifer; Henn, Lisa

2015-01-01

There are well-defined theoretical differences between the classical test theory (CTT) and item response theory (IRT) frameworks. It is understood that in the CTT framework, person and item statistics are test- and sample-dependent. This is not the perception with IRT. For this reason, the IRT framework is considered to be theoretically superior…

Goodness-of-Fit Assessment of Item Response Theory Models

Science.gov (United States)

Maydeu-Olivares, Alberto

2013-01-01

The article provides an overview of goodness-of-fit assessment methods for item response theory (IRT) models. It is now possible to obtain accurate "p"-values of the overall fit of the model if bivariate information statistics are used. Several alternative approaches are described. As the validity of inferences drawn on the fitted model…

Using R and WinBUGS to fit a generalized partial credit model for developing and evaluating patient-reported outcomes assessments.

Science.gov (United States)

Li, Yuelin; Baser, Ray

2012-08-15

The US Food and Drug Administration recently announced the final guidelines on the development and validation of patient-reported outcomes (PROs) assessments in drug labeling and clinical trials. This guidance paper may boost the demand for new PRO survey questionnaires. Henceforth, biostatisticians may encounter psychometric methods more frequently, particularly item response theory (IRT) models to guide the shortening of a PRO assessment instrument. This article aims to provide an introduction on the theory and practical analytic skills in fitting a generalized partial credit model (GPCM) in IRT. GPCM theory is explained first, with special attention to a clearer exposition of the formal mathematics than what is typically available in the psychometric literature. Then, a worked example is presented, using self-reported responses taken from the international personality item pool. The worked example contains step-by-step guides on using the statistical languages r and WinBUGS in fitting the GPCM. Finally, the Fisher information function of the GPCM model is derived and used to evaluate, as an illustrative example, the usefulness of assessment items by their information contents. This article aims to encourage biostatisticians to apply IRT models in the re-analysis of existing data and in future research. Copyright © 2012 John Wiley & Sons, Ltd.

Application of Item Response Theory to Modeling of Expanded Disability Status Scale in Multiple Sclerosis.

Science.gov (United States)

Novakovic, A M; Krekels, E H J; Munafo, A; Ueckert, S; Karlsson, M O

2017-01-01

In this study, we report the development of the first item response theory (IRT) model within a pharmacometrics framework to characterize the disease progression in multiple sclerosis (MS), as measured by Expanded Disability Status Score (EDSS). Data were collected quarterly from a 96-week phase III clinical study by a blinder rater, involving 104,206 item-level observations from 1319 patients with relapsing-remitting MS (RRMS), treated with placebo or cladribine. Observed scores for each EDSS item were modeled describing the probability of a given score as a function of patients' (unobserved) disability using a logistic model. Longitudinal data from placebo arms were used to describe the disease progression over time, and the model was then extended to cladribine arms to characterize the drug effect. Sensitivity with respect to patient disability was calculated as Fisher information for each EDSS item, which were ranked according to the amount of information they contained. The IRT model was able to describe baseline and longitudinal EDSS data on item and total level. The final model suggested that cladribine treatment significantly slows disease-progression rate, with a 20% decrease in disease-progression rate compared to placebo, irrespective of exposure, and effects an additional exposure-dependent reduction in disability progression. Four out of eight items contained 80% of information for the given range of disabilities. This study has illustrated that IRT modeling is specifically suitable for accurate quantification of disease status and description and prediction of disease progression in phase 3 studies on RRMS, by integrating EDSS item-level data in a meaningful manner.

Standardized assessment of infrared thermographic fever screening system performance

Science.gov (United States)

Ghassemi, Pejhman; Pfefer, Joshua; Casamento, Jon; Wang, Quanzeng

2017-03-01

Thermal modalities represent the only currently viable mass fever screening approach for outbreaks of infectious disease pandemics such as Ebola and SARS. Non-contact infrared thermometers (NCITs) and infrared thermographs (IRTs) have been previously used for mass fever screening in transportation hubs such as airports to reduce the spread of disease. While NCITs remain a more popular choice for fever screening in the field and at fixed locations, there has been increasing evidence in the literature that IRTs can provide greater accuracy in estimating core body temperature if appropriate measurement practices are applied - including the use of technically suitable thermographs. Therefore, the purpose of this study was to develop a battery of evaluation test methods for standardized, objective and quantitative assessment of thermograph performance characteristics critical to assessing suitability for clinical use. These factors include stability, drift, uniformity, minimum resolvable temperature difference, and accuracy. Two commercial IRT models were characterized. An external temperature reference source with high temperature accuracy was utilized as part of the screening thermograph. Results showed that both IRTs are relatively accurate and stable (<1% error of reading with stability of +/-0.05°C). Overall, results of this study may facilitate development of standardized consensus test methods to enable consistent and accurate use of IRTs for fever screening.

Biases and power for groups comparison on subjective health measurements.

Science.gov (United States)

Hamel, Jean-François; Hardouin, Jean-Benoit; Le Neel, Tanguy; Kubis, Gildas; Roquelaure, Yves; Sébille, Véronique

2012-01-01

Subjective health measurements are increasingly used in clinical research, particularly for patient groups comparisons. Two main types of analytical strategies can be used for such data: so-called classical test theory (CTT), relying on observed scores and models coming from Item Response Theory (IRT) relying on a response model relating the items responses to a latent parameter, often called latent trait. Whether IRT or CTT would be the most appropriate method to compare two independent groups of patients on a patient reported outcomes measurement remains unknown and was investigated using simulations. For CTT-based analyses, groups comparison was performed using t-test on the scores. For IRT-based analyses, several methods were compared, according to whether the Rasch model was considered with random effects or with fixed effects, and the group effect was included as a covariate or not. Individual latent traits values were estimated using either a deterministic method or by stochastic approaches. Latent traits were then compared with a t-test. Finally, a two-steps method was performed to compare the latent trait distributions, and a Wald test was performed to test the group effect in the Rasch model including group covariates. The only unbiased IRT-based method was the group covariate Wald's test, performed on the random effects Rasch model. This model displayed the highest observed power, which was similar to the power using the score t-test. These results need to be extended to the case frequently encountered in practice where data are missing and possibly informative.

Biases and power for groups comparison on subjective health measurements.

Directory of Open Access Journals (Sweden)

Jean-François Hamel

Full Text Available Subjective health measurements are increasingly used in clinical research, particularly for patient groups comparisons. Two main types of analytical strategies can be used for such data: so-called classical test theory (CTT, relying on observed scores and models coming from Item Response Theory (IRT relying on a response model relating the items responses to a latent parameter, often called latent trait. Whether IRT or CTT would be the most appropriate method to compare two independent groups of patients on a patient reported outcomes measurement remains unknown and was investigated using simulations. For CTT-based analyses, groups comparison was performed using t-test on the scores. For IRT-based analyses, several methods were compared, according to whether the Rasch model was considered with random effects or with fixed effects, and the group effect was included as a covariate or not. Individual latent traits values were estimated using either a deterministic method or by stochastic approaches. Latent traits were then compared with a t-test. Finally, a two-steps method was performed to compare the latent trait distributions, and a Wald test was performed to test the group effect in the Rasch model including group covariates. The only unbiased IRT-based method was the group covariate Wald's test, performed on the random effects Rasch model. This model displayed the highest observed power, which was similar to the power using the score t-test. These results need to be extended to the case frequently encountered in practice where data are missing and possibly informative.

Biases and Power for Groups Comparison on Subjective Health Measurements

Science.gov (United States)

Hamel, Jean-François; Hardouin, Jean-Benoit; Le Neel, Tanguy; Kubis, Gildas; Roquelaure, Yves; Sébille, Véronique

2012-01-01

Subjective health measurements are increasingly used in clinical research, particularly for patient groups comparisons. Two main types of analytical strategies can be used for such data: so-called classical test theory (CTT), relying on observed scores and models coming from Item Response Theory (IRT) relying on a response model relating the items responses to a latent parameter, often called latent trait. Whether IRT or CTT would be the most appropriate method to compare two independent groups of patients on a patient reported outcomes measurement remains unknown and was investigated using simulations. For CTT-based analyses, groups comparison was performed using t-test on the scores. For IRT-based analyses, several methods were compared, according to whether the Rasch model was considered with random effects or with fixed effects, and the group effect was included as a covariate or not. Individual latent traits values were estimated using either a deterministic method or by stochastic approaches. Latent traits were then compared with a t-test. Finally, a two-steps method was performed to compare the latent trait distributions, and a Wald test was performed to test the group effect in the Rasch model including group covariates. The only unbiased IRT-based method was the group covariate Wald’s test, performed on the random effects Rasch model. This model displayed the highest observed power, which was similar to the power using the score t-test. These results need to be extended to the case frequently encountered in practice where data are missing and possibly informative. PMID:23115620

The Impact of Varied Discrimination Parameters on Mixed-Format Item Response Theory Model Selection

Science.gov (United States)

Whittaker, Tiffany A.; Chang, Wanchen; Dodd, Barbara G.

2013-01-01

Whittaker, Chang, and Dodd compared the performance of model selection criteria when selecting among mixed-format IRT models and found that the criteria did not perform adequately when selecting the more parameterized models. It was suggested by M. S. Johnson that the problems when selecting the more parameterized models may be because of the low…

MOS modeling hierarchy including radiation effects

International Nuclear Information System (INIS)

Alexander, D.R.; Turfler, R.M.

1975-01-01

A hierarchy of modeling procedures has been developed for MOS transistors, circuit blocks, and integrated circuits which include the effects of total dose radiation and photocurrent response. The models were developed for use with the SCEPTRE circuit analysis program, but the techniques are suitable for other modern computer aided analysis programs. The modeling hierarchy permits the designer or analyst to select the level of modeling complexity consistent with circuit size, parametric information, and accuracy requirements. Improvements have been made in the implementation of important second order effects in the transistor MOS model, in the definition of MOS building block models, and in the development of composite terminal models for MOS integrated circuits

A Bifactor Multidimensional Item Response Theory Model for Differential Item Functioning Analysis on Testlet-Based Items

Science.gov (United States)

Fukuhara, Hirotaka; Kamata, Akihito

2011-01-01

A differential item functioning (DIF) detection method for testlet-based data was proposed and evaluated in this study. The proposed DIF model is an extension of a bifactor multidimensional item response theory (MIRT) model for testlets. Unlike traditional item response theory (IRT) DIF models, the proposed model takes testlet effects into…

Determination of the heat transfer coefficient from IRT measurement data using the Trefftz method

Directory of Open Access Journals (Sweden)

Maciejewska Beata

2016-01-01

Full Text Available The paper presents the method of heat transfer coefficient determination for boiling research during FC-72 flow in the minichannels, each 1.7 mm deep, 24 mm wide and 360 mm long. The heating element was the thin foil, enhanced on the side which comes into contact with fluid in the minichannels. Local values of the heat transfer coefficient were calculated from the Robin boundary condition. The foil temperature distribution and the derivative of the foil temperature were obtained by solving the two-dimensional inverse heat conduction problem, due to measurements obtained by IRT. Calculations was carried out by the method based on the approximation of the solution of the problem using a linear combination of Trefftz functions. The basic property of this functions is they satisfy the governing equation. Unknown coefficients of linear combination of Trefftz functions are calculated from the minimization of the functional that expresses the mean square error of the approximate solution on the boundary. The results presented as IR thermographs, two-phase flow structure images and the heat transfer coefficient as a function of the distance from the channel inlet, were analyzed.

Partially Observed Mixtures of IRT Models: An Extension of the Generalized Partial-Credit Model

Science.gov (United States)

Von Davier, Matthias; Yamamoto, Kentaro

2004-01-01

The generalized partial-credit model (GPCM) is used frequently in educational testing and in large-scale assessments for analyzing polytomous data. Special cases of the generalized partial-credit model are the partial-credit model--or Rasch model for ordinal data--and the two parameter logistic (2PL) model. This article extends the GPCM to the…

Markov Decision Process Measurement Model.

Science.gov (United States)

LaMar, Michelle M

2018-03-01

Within-task actions can provide additional information on student competencies but are challenging to model. This paper explores the potential of using a cognitive model for decision making, the Markov decision process, to provide a mapping between within-task actions and latent traits of interest. Psychometric properties of the model are explored, and simulation studies report on parameter recovery within the context of a simple strategy game. The model is then applied to empirical data from an educational game. Estimates from the model are found to correlate more strongly with posttest results than a partial-credit IRT model based on outcome data alone.

Strategy for Sustainable Utilization of IRT-Sofia Research Reactor

International Nuclear Information System (INIS)

Mitev, M.; Apostolov, T.; Ilieva, K.; Belousov, S.; Nonova, T.

2013-01-01

The Research Reactor IRT-2000 in Sofia is in process of reconstruction into a low-power reactor of 200 kW under the decision of the Council of Ministers of Republic of Bulgaria from 2001. The reactor will be utilized for development and preservation of nuclear science, skills, and knowledge; implementation of applied methods and research; education of students and training of graduated physicists and engineers in the field of nuclear science and nuclear energy; development of radiation therapy facility. Nuclear energy has a strategic place within the structure of the country’s energy system. In that aspect, the research reactor as a material base, and its scientific and technical personnel, represent a solid basis for the development of nuclear energy in our country. The acquired scientific experience and qualification in reactor operation are a precondition for the equal in rights participation of the country in the international cooperation and the approaching to the European structures, and assurance of the national interests. Therefore, the operation and use of the research reactor brings significant economic benefits for the country. For education of students in nuclear energy, reactor physics experiments for measurements of static and kinetic reactor parameters will be carried out on the research reactor. The research reactor as a national base will support training and applied research, keep up the good practice and the preparation of specialists who are able to monitor radioactivity sources, to develop new methods for detection of low quantities of radioactive isotopes which are hard to find, for deactivation and personal protection. The reactor will be used for production of isotopes needed for medical therapy and diagnostics; it will be the neutron source in element activation analysis having a number of applications in industrial production, medicine, chemistry, criminology, etc. The reactor operation will increase the public understanding, confidence

Bayesian modeling of measurement error in predictor variables using item response theory

NARCIS (Netherlands)

Fox, Gerardus J.A.; Glas, Cornelis A.W.

2000-01-01

This paper focuses on handling measurement error in predictor variables using item response theory (IRT). Measurement error is of great important in assessment of theoretical constructs, such as intelligence or the school climate. Measurement error is modeled by treating the predictors as unobserved

Stepwise Analysis of Differential Item Functioning Based on Multiple-Group Partial Credit Model.

Science.gov (United States)

Muraki, Eiji

1999-01-01

Extended an Item Response Theory (IRT) method for detection of differential item functioning to the partial credit model and applied the method to simulated data using a stepwise procedure. Then applied the stepwise DIF analysis based on the multiple-group partial credit model to writing trend data from the National Assessment of Educational…

International Peer Review of Swedish Nuclear Fuel and Waste Management Company's SR-Can interim report

International Nuclear Information System (INIS)

Sagar, Budhi; Bailey, Lucy; Bennett, David G.; Egan, Mike; Roehlig, Klaus

2004-12-01

demonstration (e.g. allocation of safety to different barrier functions and the role of dilution); Basis and methods for scenario selection and evaluation; Assessment of model framework for consequence analysis and compliance evaluation (e.g. justification of models, and parameters); Methods for biosphere modelling including the transition zone from basement rock to quaternary deposits and ecosystems; Methods for risk analysis, including the use of probabilistic methods, uncertainty and sensitivity analysis, estimation of probabilities, averaging of risk; and Quality assurance measures including handling of expert judgments. Among its conclusions, the IRT considers that the SR-Can Interim Report describes a logical methodology for undertaking a safety assessment that could be used as a component of a safety case to support a licence application. SKB's assessment methodology also includes some innovative and positive components, such as the use of safety function indicators and analytical models. From the IRT's perspective, the main deficiencies in SKB's programme and approach relate less to the methodology and more to the rigour with which safety assessment needs to be conducted to support a formal licence application. There are a number of areas, for example in the development of scenarios and in the management and treatment of uncertainty, where current evidence suggests a need for greater clarity and traceability. More generally, it is recommended that SKB should ensure that all aspects of the safety assessment are conducted in accordance with auditable project-specific guidance and QA procedures. In view of the above, and the fact that SKB has acknowledged that some further development work remains to be done, the IRT believes that it could be a challenge for SKB to conduct and present a safety assessment of suitable quality within the currently proposed timescale for delivery of the SR-Can assessment and the 2006 licence application

Prophylactic Effect of Probiotics on the Development of Experimental Autoimmune Myasthenia Gravis

Science.gov (United States)

Chae, Chang-Suk; Kwon, Ho-Keun; Hwang, Ji-Sun; Kim, Jung-Eun; Im, Sin-Hyeog

2012-01-01

Probiotics are live bacteria that confer health benefits to the host physiology. Although protective role of probiotics have been reported in diverse diseases, no information is available whether probiotics can modulate neuromuscular immune disorders. We have recently demonstrated that IRT5 probiotics, a mixture of 5 probiotics, could suppress diverse experimental disorders in mice model. In this study we further investigated whether IRT5 probiotics could modulate the progression of experimental autoimmune myasthenia gravis (EAMG). Myasthenia gravis (MG) is a T cell dependent antibody mediated autoimmune disorder in which acetylcholine receptor (AChR) at the neuromuscular junction is the major auto-antigen. Oral administration of IRT5 probiotics significantly reduced clinical symptoms of EAMG such as weight loss, body trembling and grip strength. Prophylactic effect of IRT5 probiotics on EMAG is mediated by down-regulation of effector function of AChR-reactive T cells and B cells. Administration of IRT5 probiotics decreased AChR-reactive lymphocyte proliferation, anti-AChR reactive IgG levels and inflammatory cytokine levels such as IFN-γ, TNF-α, IL-6 and IL-17. Down-regulation of inflammatory mediators in AChR-reactive lymphocytes by IRT5 probiotics is mediated by the generation of regulatory dendritic cells (rDCs) that express increased levels of IL-10, TGF-β, arginase 1 and aldh1a2. Furthermore, DCs isolated from IRT5 probiotics-fed group effectively converted CD4+ T cells into CD4+Foxp3+ regulatory T cells compared with control DCs. Our data suggest that IRT5 probiotics could be applicable to modulate antibody mediated autoimmune diseases including myasthenia gravis. PMID:23284891

A Comparison of Item Exposure Control Procedures with the Generalized Partial Credit Model

Science.gov (United States)

Sanchez, Edgar Isaac

2008-01-01

To enhance test security of high stakes tests, it is vital to understand the way various exposure control strategies function under various IRT models. To that end the present dissertation focused on the performance of several exposure control strategies under the generalized partial credit model with an item pool of 100 and 200 items. These…

Trade Barrier Elimination, Economics of Scale and Market Competition: Computable General Equilibrium Model

Directory of Open Access Journals (Sweden)

Widyastutik Widyastutik

2017-07-01

Full Text Available The ASEAN and its dialogue partner countries agreed to reduce trade barriers in the services sector, one of which is sea transport services. The purpose of this study is to estimate the equivalent tax of non-tariff barriers in the sea transport services. Besides that, this study is going to analyze the economic impacts of the regulatory barriers elimination in the sea transport services of ASEAN and its dialogue partner countries. Using the gravity model, it can be identified that trade barriers of sea transport services sector of ASEAN and dialogue partner countries are still relatively high. Additionally, by adopting IC-IRTS model in Global CGE Model (GTAP, the simulation results show consistent results with the theory of pro-competitive effects. The greater gain from trade is obtained in the CGE model assuming IC-IRTS compared to PC-CRTS. China gains a greater benefit that is indicated by the highest increase in welfare and GDP followed by Japan and AustraliaDOI: 10.15408/sjie.v6i2.5279

Combined application of OGTT, IRT and CPRT for diagnosis and treatment of type 2 diabetes mellitus

International Nuclear Information System (INIS)

Wei Zikun; Yang Xiaoli; Tian Zhufang

2006-01-01

Objective: To assess the value of combined clinical application of oral glucose tolerance test (OGTT), insulin release test (IRT) and C-peptide release test (CPRT) for the diagnosis and treatment of type 2 diabetes mellitus (DM2). Methods: Retrospect analysis of the data of the results of these three tests in 217 subjects examined was performed. Results: (1) Among the 217 subjects, 71 of them were not diagnosed as diabetics. However, upon further scrutinization of the data, 49 (69%) should be classified as diabetics. Fasting blood sugar (FPG) levels were normal in 53% of the 49, but 2h PG levels were mostly elevated with the exception of only 4 (4/49, 8%), Therefore, 2h PG levels were much more useful for screening of diabetes than FPG levels were. (2) Treatment result in these patients was not very satisfactory: only 24% of the patients (35/146) had their disease well-controlled. Conclusion: Combined clinical application of OGTT, ITR and CPRT would enhance the diagnostic accuracy of diabetes with fewer cases missed. (authors)

Radiation protection, radioactive waste management and site monitoring at the nuclear scientific experimental and educational centre IRT-Sofia at INRNE-BAS.

Science.gov (United States)

Mladenov, Al; Stankov, D; Nonova, Tz; Krezhov, K

2014-11-01

This article identifies important components and describes the safe practices in implementing radiation protection and radioactive waste management programmes, and in their optimisation at the Nuclear Scientific Experimental and Educational Centre with research reactor IRT at INRNE-BAS. It covers the instrumentation and personal protective equipment and organisational issues related to the continuous site monitoring. The reactor is under major reconstruction and the measures applied to radiation monitoring of environment and working area focused on restricting the radiation exposure of the staff as well as compliance with international good practices related to the environmental and public radiation safety requirements are also addressed. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Lord-Wingersky Algorithm Version 2.0 for Hierarchical Item Factor Models with Applications in Test Scoring, Scale Alignment, and Model Fit Testing.

Science.gov (United States)

Cai, Li

2015-06-01

Lord and Wingersky's (Appl Psychol Meas 8:453-461, 1984) recursive algorithm for creating summed score based likelihoods and posteriors has a proven track record in unidimensional item response theory (IRT) applications. Extending the recursive algorithm to handle multidimensionality is relatively simple, especially with fixed quadrature because the recursions can be defined on a grid formed by direct products of quadrature points. However, the increase in computational burden remains exponential in the number of dimensions, making the implementation of the recursive algorithm cumbersome for truly high-dimensional models. In this paper, a dimension reduction method that is specific to the Lord-Wingersky recursions is developed. This method can take advantage of the restrictions implied by hierarchical item factor models, e.g., the bifactor model, the testlet model, or the two-tier model, such that a version of the Lord-Wingersky recursive algorithm can operate on a dramatically reduced set of quadrature points. For instance, in a bifactor model, the dimension of integration is always equal to 2, regardless of the number of factors. The new algorithm not only provides an effective mechanism to produce summed score to IRT scaled score translation tables properly adjusted for residual dependence, but leads to new applications in test scoring, linking, and model fit checking as well. Simulated and empirical examples are used to illustrate the new applications.

An NCME Instructional Module on Polytomous Item Response Theory Models

Science.gov (United States)

Penfield, Randall David

2014-01-01

A polytomous item is one for which the responses are scored according to three or more categories. Given the increasing use of polytomous items in assessment practices, item response theory (IRT) models specialized for polytomous items are becoming increasingly common. The purpose of this ITEMS module is to provide an accessible overview of…

An Introduction to Item Response Theory for Health Behavior Researchers

Science.gov (United States)

Warne, Russell T.; McKyer, E. J. Lisako; Smith, Matthew L.

2012-01-01

Objective: To introduce item response theory (IRT) to health behavior researchers by contrasting it with classical test theory and providing an example of IRT in health behavior. Method: Demonstrate IRT by fitting the 2PL model to substance-use survey data from the Adolescent Health Risk Behavior questionnaire (n = 1343 adolescents). Results: An…

A Multidimensional Partial Credit Model with Associated Item and Test Statistics: An Application to Mixed-Format Tests

Science.gov (United States)

Yao, Lihua; Schwarz, Richard D.

2006-01-01

Multidimensional item response theory (IRT) models have been proposed for better understanding the dimensional structure of data or to define diagnostic profiles of student learning. A compensatory multidimensional two-parameter partial credit model (M-2PPC) for constructed-response items is presented that is a generalization of those proposed to…

Optimal item discrimination and maximum information for logistic IRT models

NARCIS (Netherlands)

Veerkamp, W.J.J.; Veerkamp, Wim J.J.; Berger, Martijn P.F.; Berger, Martijn

1999-01-01

Items with the highest discrimination parameter values in a logistic item response theory model do not necessarily give maximum information. This paper derives discrimination parameter values, as functions of the guessing parameter and distances between person parameters and item difficulty, that

Item Response Theory as an Efficient Tool to Describe a Heterogeneous Clinical Rating Scale in De Novo Idiopathic Parkinson's Disease Patients.

Science.gov (United States)

Buatois, Simon; Retout, Sylvie; Frey, Nicolas; Ueckert, Sebastian

2017-10-01

This manuscript aims to precisely describe the natural disease progression of Parkinson's disease (PD) patients and evaluate approaches to increase the drug effect detection power. An item response theory (IRT) longitudinal model was built to describe the natural disease progression of 423 de novo PD patients followed during 48 months while taking into account the heterogeneous nature of the MDS-UPDRS. Clinical trial simulations were then used to compare drug effect detection power from IRT and sum of item scores based analysis under different analysis endpoints and drug effects. The IRT longitudinal model accurately describes the evolution of patients with and without PD medications while estimating different progression rates for the subscales. When comparing analysis methods, the IRT-based one consistently provided the highest power. IRT is a powerful tool which enables to capture the heterogeneous nature of the MDS-UPDRS.

Item Response Theory Models for Performance Decline during Testing

Science.gov (United States)

Jin, Kuan-Yu; Wang, Wen-Chung

2014-01-01

Sometimes, test-takers may not be able to attempt all items to the best of their ability (with full effort) due to personal factors (e.g., low motivation) or testing conditions (e.g., time limit), resulting in poor performances on certain items, especially those located toward the end of a test. Standard item response theory (IRT) models fail to…

Building an Evaluation Scale using Item Response Theory.

Science.gov (United States)

Lalor, John P; Wu, Hao; Yu, Hong

2016-11-01

Evaluation of NLP methods requires testing against a previously vetted gold-standard test set and reporting standard metrics (accuracy/precision/recall/F1). The current assumption is that all items in a given test set are equal with regards to difficulty and discriminating power. We propose Item Response Theory (IRT) from psychometrics as an alternative means for gold-standard test-set generation and NLP system evaluation. IRT is able to describe characteristics of individual items - their difficulty and discriminating power - and can account for these characteristics in its estimation of human intelligence or ability for an NLP task. In this paper, we demonstrate IRT by generating a gold-standard test set for Recognizing Textual Entailment. By collecting a large number of human responses and fitting our IRT model, we show that our IRT model compares NLP systems with the performance in a human population and is able to provide more insight into system performance than standard evaluation metrics. We show that a high accuracy score does not always imply a high IRT score, which depends on the item characteristics and the response pattern.

Stochastic order in dichotomous item response models for fixed tests, research adaptive tests, or multiple abilities

NARCIS (Netherlands)

van der Linden, Willem J.

1995-01-01

Dichotomous item response theory (IRT) models can be viewed as families of stochastically ordered distributions of responses to test items. This paper explores several properties of such distributiom. The focus is on the conditions under which stochastic order in families of conditional

A review of the effects on IRT item parameter estimates with a focus on misbehaving common items in test equating

Directory of Open Access Journals (Sweden)

Michalis P Michaelides

2010-10-01

Full Text Available Many studies have investigated the topic of change or drift in item parameter estimates in the context of Item Response Theory. Content effects, such as instructional variation and curricular emphasis, as well as context effects, such as the wording, position, or exposure of an item have been found to impact item parameter estimates. The issue becomes more critical when items with estimates exhibiting differential behavior across test administrations are used as common for deriving equating transformations. This paper reviews the types of effects on IRT item parameter estimates and focuses on the impact of misbehaving or aberrant common items on equating transformations. Implications relating to test validity and the judgmental nature of the decision to keep or discard aberrant common items are discussed, with recommendations for future research into more informed and formal ways of dealing with misbehaving common items.

Modeling Composite Assessment Data Using Item Response Theory

Science.gov (United States)

Ueckert, Sebastian

2018-01-01

Composite assessments aim to combine different aspects of a disease in a single score and are utilized in a variety of therapeutic areas. The data arising from these evaluations are inherently discrete with distinct statistical properties. This tutorial presents the framework of the item response theory (IRT) for the analysis of this data type in a pharmacometric context. The article considers both conceptual (terms and assumptions) and practical questions (modeling software, data requirements, and model building). PMID:29493119

Applying Kaplan-Meier to Item Response Data

Science.gov (United States)

McNeish, Daniel

2018-01-01

Some IRT models can be equivalently modeled in alternative frameworks such as logistic regression. Logistic regression can also model time-to-event data, which concerns the probability of an event occurring over time. Using the relation between time-to-event models and logistic regression and the relation between logistic regression and IRT, this…

The individual reminiscence therapy for patients with dementia. Assessment with SPECT and neuropsychological test

International Nuclear Information System (INIS)

Tanaka, Katsuaki

2009-01-01

We evaluated psychosocial and neuronal effects of the individual reminiscence therapy (IRT) for patients with cognitive impairment. 25 IRT- treated outpatients with Alzheimer disease were compared with 14 outpatients who were not receiving any treatments including IRT. The subjects were treated with the total of 8 IRT sessions within 4 months. The changes of cognitive function, mood, volition, and the ability of caregiver were measured with questionnaires. The changes in the regional cerebral blood flow (rCBF) with IRT were measured using single photon emission computed tomography (SPECT). In IRT group, depressed mood was improved after 4 month-IRT, which reached the significance level one year later. On the contrary, we could not observe any psychosocial changes in control group. Significant increase in regional blood flow was observed in the left dorsolateral prefrontal cortex (DLPFC) and in the right temporoparietal cortex in IRT group. On the contrary, the significant increase in the rCBF was observed only in the left DLPFC in control group. These results suggest that the IRT might improve the depressed mood and the spatial cognition in patients with cognitive impairment with neuronal change. (author)

Progressive IRP Models for Power Resources Including EPP

Directory of Open Access Journals (Sweden)

Yiping Zhu

2017-01-01

Full Text Available In the view of optimizing regional power supply and demand, the paper makes effective planning scheduling of supply and demand side resources including energy efficiency power plant (EPP, to achieve the target of benefit, cost, and environmental constraints. In order to highlight the characteristics of different supply and demand resources in economic, environmental, and carbon constraints, three planning models with progressive constraints are constructed. Results of three models by the same example show that the best solutions to different models are different. The planning model including EPP has obvious advantages considering pollutant and carbon emission constraints, which confirms the advantages of low cost and emissions of EPP. The construction of progressive IRP models for power resources considering EPP has a certain reference value for guiding the planning and layout of EPP within other power resources and achieving cost and environmental objectives.

A Test of the Need Hierarchy Concept by a Markov Model of Change in Need Strength.

Science.gov (United States)

Rauschenberger, John; And Others

1980-01-01

In this study of 547 high school graduates, Alderfer's and Maslow's need hierarchy theories were expressed in Markov chain form and were subjected to empirical test. Both models were disconfirmed. Corroborative multiwave correlational analysis also failed to support the need hierarchy concept. (Author/IRT)

Application of Item Response Theory to Modeling of Expanded Disability Status Scale in Multiple Sclerosis.

NARCIS (Netherlands)

Novakovic, A.M.; Krekels, E.H.; Munafo, A.; Ueckert, S.; Karlsson, M.O.

2016-01-01

In this study, we report the development of the first item response theory (IRT) model within a pharmacometrics framework to characterize the disease progression in multiple sclerosis (MS), as measured by Expanded Disability Status Score (EDSS). Data were collected quarterly from a 96-week phase III

Item Response Theory Models for Wording Effects in Mixed-Format Scales

Science.gov (United States)

Wang, Wen-Chung; Chen, Hui-Fang; Jin, Kuan-Yu

2015-01-01

Many scales contain both positively and negatively worded items. Reverse recoding of negatively worded items might not be enough for them to function as positively worded items do. In this study, we commented on the drawbacks of existing approaches to wording effect in mixed-format scales and used bi-factor item response theory (IRT) models to…

A neutronic feasibility study for LEU conversion of the IR-8 research reactor

International Nuclear Information System (INIS)

Deen, J.R.; Hanan, N.A.; Matos, J.E.; Egorenkov, P.M.; Nasonov, V.A.

1998-01-01

Equilibrium fuel cycle comparisons for the IR-8 research reactor were made for HEU (90%), HEU (36%), and LEU (19.75%) fuel assembly (FA) designs using three dimensional multi-group diffusion theory models benchmarked to detailed Monte Carlo models of the reactor. Comparisons were made of changes in reactivity, cycle length, average 235 U discharge burnup, thermal neutron flux, and control rod worths for the 90% and 36% enriched IRT-3M fuel assembly and the 19.75% enriched IRT-4M fuel assembly with the same fuel management strategy. The results of these comparisons showed that a uranium density of 3.5 g/cm 3 in the fuel meat would be required in the LEU IRT-4M fuel assembly to match the cycle length of the HEU (90%) IRT-3M FA and an LEU density of 3.7 g/cm 3 is needed to match the cycle length of the HEU (36%) IRT-3M FA. (author)

Including investment risk in large-scale power market models

DEFF Research Database (Denmark)

Lemming, Jørgen Kjærgaard; Meibom, P.

2003-01-01

Long-term energy market models can be used to examine investments in production technologies, however, with market liberalisation it is crucial that such models include investment risks and investor behaviour. This paper analyses how the effect of investment risk on production technology selection...... can be included in large-scale partial equilibrium models of the power market. The analyses are divided into a part about risk measures appropriate for power market investors and a more technical part about the combination of a risk-adjustment model and a partial-equilibrium model. To illustrate...... the analyses quantitatively, a framework based on an iterative interaction between the equilibrium model and a separate risk-adjustment module was constructed. To illustrate the features of the proposed modelling approach we examined how uncertainty in demand and variable costs affects the optimal choice...

What are the appropriate methods for analyzing patient-reported outcomes in randomized trials when data are missing?

Science.gov (United States)

Hamel, J F; Sebille, V; Le Neel, T; Kubis, G; Boyer, F C; Hardouin, J B

2017-12-01

Subjective health measurements using Patient Reported Outcomes (PRO) are increasingly used in randomized trials, particularly for patient groups comparisons. Two main types of analytical strategies can be used for such data: Classical Test Theory (CTT) and Item Response Theory models (IRT). These two strategies display very similar characteristics when data are complete, but in the common case when data are missing, whether IRT or CTT would be the most appropriate remains unknown and was investigated using simulations. We simulated PRO data such as quality of life data. Missing responses to items were simulated as being completely random, depending on an observable covariate or on an unobserved latent trait. The considered CTT-based methods allowed comparing scores using complete-case analysis, personal mean imputations or multiple-imputations based on a two-way procedure. The IRT-based method was the Wald test on a Rasch model including a group covariate. The IRT-based method and the multiple-imputations-based method for CTT displayed the highest observed power and were the only unbiased method whatever the kind of missing data. Online software and Stata® modules compatibles with the innate mi impute suite are provided for performing such analyses. Traditional procedures (listwise deletion and personal mean imputations) should be avoided, due to inevitable problems of biases and lack of power.

An emotional functioning item bank of 24 items for computerized adaptive testing (CAT) was established

DEFF Research Database (Denmark)

Petersen, Morten Aa.; Gamper, Eva-Maria; Costantini, Anna

2016-01-01

of the widely used EORTC Quality of Life questionnaire (QLQ-C30). STUDY DESIGN AND SETTING: On the basis of literature search and evaluations by international samples of experts and cancer patients, 38 candidate items were developed. The psychometric properties of the items were evaluated in a large...... international sample of cancer patients. This included evaluations of dimensionality, item response theory (IRT) model fit, differential item functioning (DIF), and of measurement precision/statistical power. RESULTS: Responses were obtained from 1,023 cancer patients from four countries. The evaluations showed...... that 24 items could be included in a unidimensional IRT model. DIF did not seem to have any significant impact on the estimation of EF. Evaluations indicated that the CAT measure may reduce sample size requirements by up to 50% compared to the QLQ-C30 EF scale without reducing power. CONCLUSION...

A Mixture Rasch Model with a Covariate: A Simulation Study via Bayesian Markov Chain Monte Carlo Estimation

Science.gov (United States)

Dai, Yunyun

2013-01-01

Mixtures of item response theory (IRT) models have been proposed as a technique to explore response patterns in test data related to cognitive strategies, instructional sensitivity, and differential item functioning (DIF). Estimation proves challenging due to difficulties in identification and questions of effect size needed to recover underlying…

Parent Ratings of ADHD Symptoms: Generalized Partial Credit Model Analysis of Differential Item Functioning across Gender

Science.gov (United States)

Gomez, Rapson

2012-01-01

Objective: Generalized partial credit model, which is based on item response theory (IRT), was used to test differential item functioning (DIF) for the "Diagnostic and Statistical Manual of Mental Disorders" (4th ed.), inattention (IA), and hyperactivity/impulsivity (HI) symptoms across boys and girls. Method: To accomplish this, parents completed…

A Bayesian Approach to Person Fit Analysis in Item Response Theory Models. Research Report.

Science.gov (United States)

Glas, Cees A. W.; Meijer, Rob R.

A Bayesian approach to the evaluation of person fit in item response theory (IRT) models is presented. In a posterior predictive check, the observed value on a discrepancy variable is positioned in its posterior distribution. In a Bayesian framework, a Markov Chain Monte Carlo procedure can be used to generate samples of the posterior distribution…

Unsteady panel method for complex configurations including wake modeling

CSIR Research Space (South Africa)

Van Zyl, Lourens H

2008-01-01

Full Text Available implementations of the DLM are however not very versatile in terms of geometries that can be modeled. The ZONA6 code offers a versatile surface panel body model including a separated wake model, but uses a pressure panel method for lifting surfaces. This paper...

BayesTwin: An R Package for Bayesian Inference of Item-Level Twin Data

Directory of Open Access Journals (Sweden)

Inga Schwabe

2017-11-01

Full Text Available BayesTwin is an open-source R package that serves as a pipeline to the MCMC program JAGS to perform Bayesian inference on genetically-informative hierarchical twin data. Simultaneously to the biometric model, an item response theory (IRT measurement model is estimated, allowing analysis of the raw phenotypic (item-level data. The integration of such a measurement model is important since earlier research has shown that an analysis based on an aggregated measure (e.g., a sum-score based analysis can lead to an underestimation of heritability and the spurious finding of genotype-environment interactions. The package includes all common biometric and IRT models as well as functions that help plot relevant information or determine whether the analysis was performed well. Funding statement: Partly funded by the PROO grant 411-12-623 from the Netherlands Organisation for Scientific Research (NWO.

Stochastic modelling of two-phase flows including phase change

International Nuclear Information System (INIS)

Hurisse, O.; Minier, J.P.

2011-01-01

Stochastic modelling has already been developed and applied for single-phase flows and incompressible two-phase flows. In this article, we propose an extension of this modelling approach to two-phase flows including phase change (e.g. for steam-water flows). Two aspects are emphasised: a stochastic model accounting for phase transition and a modelling constraint which arises from volume conservation. To illustrate the whole approach, some remarks are eventually proposed for two-fluid models. (authors)

Methods for Equating Mental Tests.

Science.gov (United States)

1984-11-01

1983) compared conventional and IRT methods for equating the Test of English as a Foreign Language ( TOEFL ) after chaining. Three conventional and...three IRT equating methods were examined in this study; two sections of TOEFL were each (separately) equated. The IRT methods included the following: (a...group. A separate base form was established for each of the six equating methods. Instead of equating the base-form TOEFL to itself, the last (eighth

Effects of eight weeks of aerobic interval training and of isoinertial resistance training on risk factors of cardiometabolic diseases and exercise capacity in healthy elderly subjects

Science.gov (United States)

Bruseghini, Paolo; Calabria, Elisa; Tam, Enrico; Milanese, Chiara; Oliboni, Eugenio; Pezzato, Andrea; Pogliaghi, Silvia; Salvagno, Gian Luca; Schena, Federico; Mucelli, Roberto Pozzi; Capelli, Carlo

2015-01-01

We investigated the effect of 8 weeks of high intensity interval training (HIT) and isoinertial resistance training (IRT) on cardiovascular fitness, muscle mass-strength and risk factors of metabolic syndrome in 12 healthy older adults (68 yy ± 4). HIT consisted in 7 two-minute repetitions at 80%–90% of V˙O2max, 3 times/w. After 4 months of recovery, subjects were treated with IRT, which included 4 sets of 7 maximal, bilateral knee extensions/flexions 3 times/w on a leg-press flywheel ergometer. HIT elicited significant: i) modifications of selected anthropometrical features; ii) improvements of cardiovascular fitness and; iii) decrease of systolic pressure. HIT and IRT induced hypertrophy of the quadriceps muscle, which, however, was paralleled by significant increases in strength only after IRT. Neither HIT nor IRT induced relevant changes in blood lipid profile, with the exception of a decrease of LDL and CHO after IRT. Physiological parameters related with aerobic fitness and selected body composition values predicting cardiovascular risk remained stable during detraining and, after IRT, they were complemented by substantial increase of muscle strength, leading to further improvements of quality of life of the subjects. PMID:26046575

Reliability, Sensitivity, and Specificity of Case Formulations for Comorbid Profiles in Interpersonal Reconstructive Therapy: Addressing Mechanisms of Psychopathology.

Science.gov (United States)

Critchfield, Kenneth L; Benjamin, Lorna Smith; Levenick, Kathleen

2015-08-01

Interpersonal Reconstructive Therapy (IRT) case formulations describe psychosocial mechanisms of affective and personality pathology in ways that enhance the effectiveness of psychotherapy for individuals. With a valid and reliable IRT case formulation, a clinician is in a better position to draw upon effective techniques to maximize treatment effects. The case formulation and treatment models for IRT were described in depth along with the IRT treatment model by Benjamin (2003/2006). Data in this report from 93 adult inpatients with complex and comorbid presentations suggest that the case formulation is highly reliable and unique to individuals, and that symptoms reflect current interpersonal stresses linked to early interactions involving forms of hostility in relation with attachment figures and corresponding to three basic patterns in adulthood: identification (be like him or her), recapitulation (act as you did with him or her), and introjection (treat yourself as you were treated).

Modeling Electric Double-Layers Including Chemical Reaction Effects

DEFF Research Database (Denmark)

Paz-Garcia, Juan Manuel; Johannesson, Björn; Ottosen, Lisbeth M.

2014-01-01

A physicochemical and numerical model for the transient formation of an electric double-layer between an electrolyte and a chemically-active flat surface is presented, based on a finite elements integration of the nonlinear Nernst-Planck-Poisson model including chemical reactions. The model works...... for symmetric and asymmetric multi-species electrolytes and is not limited to a range of surface potentials. Numerical simulations are presented, for the case of a CaCO3 electrolyte solution in contact with a surface with rate-controlled protonation/deprotonation reactions. The surface charge and potential...... are determined by the surface reactions, and therefore they depends on the bulk solution composition and concentration...

Numerical Differentiation Methods for Computing Error Covariance Matrices in Item Response Theory Modeling: An Evaluation and a New Proposal

Science.gov (United States)

Tian, Wei; Cai, Li; Thissen, David; Xin, Tao

2013-01-01

In item response theory (IRT) modeling, the item parameter error covariance matrix plays a critical role in statistical inference procedures. When item parameters are estimated using the EM algorithm, the parameter error covariance matrix is not an automatic by-product of item calibration. Cai proposed the use of Supplemented EM algorithm for…

Bayesian inference in an item response theory model with a generalized student t link function

Science.gov (United States)

Azevedo, Caio L. N.; Migon, Helio S.

2012-10-01

In this paper we introduce a new item response theory (IRT) model with a generalized Student t-link function with unknown degrees of freedom (df), named generalized t-link (GtL) IRT model. In this model we consider only the difficulty parameter in the item response function. GtL is an alternative to the two parameter logit and probit models, since the degrees of freedom (df) play a similar role to the discrimination parameter. However, the behavior of the curves of the GtL is different from those of the two parameter models and the usual Student t link, since in GtL the curve obtained from different df's can cross the probit curves in more than one latent trait level. The GtL model has similar proprieties to the generalized linear mixed models, such as the existence of sufficient statistics and easy parameter interpretation. Also, many techniques of parameter estimation, model fit assessment and residual analysis developed for that models can be used for the GtL model. We develop fully Bayesian estimation and model fit assessment tools through a Metropolis-Hastings step within Gibbs sampling algorithm. We consider a prior sensitivity choice concerning the degrees of freedom. The simulation study indicates that the algorithm recovers all parameters properly. In addition, some Bayesian model fit assessment tools are considered. Finally, a real data set is analyzed using our approach and other usual models. The results indicate that our model fits the data better than the two parameter models.

MODEL OF THE TOKAMAK EDGE DENSITY PEDESTAL INCLUDING DIFFUSIVE NEUTRALS

International Nuclear Information System (INIS)

BURRELL, K.H.

2003-01-01

OAK-B135 Several previous analytic models of the tokamak edge density pedestal have been based on diffusive transport of plasma plus free-streaming of neutrals. This latter neutral model includes only the effect of ionization and neglects charge exchange. The present work models the edge density pedestal using diffusive transport for both the plasma and the neutrals. In contrast to the free-streaming model, a diffusion model for the neutrals includes the effect of both charge exchange and ionization and is valid when charge exchange is the dominant interaction. Surprisingly, the functional forms for the electron and neutral density profiles from the present calculation are identical to the results of the previous analytic models. There are some differences in the detailed definition of various parameters in the solution. For experimentally relevant cases where ionization and charge exchange rate are comparable, both models predict approximately the same width for the edge density pedestal

BALANCED SCORECARDS EVALUATION MODEL THAT INCLUDES ELEMENTS OF ENVIRONMENTAL MANAGEMENT SYSTEM USING AHP MODEL

Directory of Open Access Journals (Sweden)

Jelena Jovanović

2010-03-01

Full Text Available The research is oriented on improvement of environmental management system (EMS using BSC (Balanced Scorecard model that presents strategic model of measurem ents and improvement of organisational performance. The research will present approach of objectives and environmental management me trics involvement (proposed by literature review in conventional BSC in "Ad Barska plovi dba" organisation. Further we will test creation of ECO-BSC model based on business activities of non-profit organisations in order to improve envir onmental management system in parallel with other systems of management. Using this approach we may obtain 4 models of BSC that includ es elements of environmen tal management system for AD "Barska plovidba". Taking into acc ount that implementation and evaluation need long period of time in AD "Barska plovidba", the final choice will be based on 14598 (Information technology - Software product evaluation and ISO 9126 (Software engineering - Product quality using AHP method. Those standards are usually used for evaluation of quality software product and computer programs that serve in organisation as support and factors for development. So, AHP model will be bas ed on evolution criteria based on suggestion of ISO 9126 standards and types of evaluation from two evaluation teams. Members of team & will be experts in BSC and environmental management system that are not em ployed in AD "Barska Plovidba" organisation. The members of team 2 will be managers of AD "Barska Plovidba" organisation (including manage rs from environmental department. Merging results based on previously cr eated two AHP models, one can obtain the most appropriate BSC that includes elements of environmental management system. The chosen model will present at the same time suggestion for approach choice including ecological metrics in conventional BSC model for firm that has at least one ECO strategic orientation.

Double-gate junctionless transistor model including short-channel effects

International Nuclear Information System (INIS)

Paz, B C; Pavanello, M A; Ávila-Herrera, F; Cerdeira, A

2015-01-01

This work presents a physically based model for double-gate junctionless transistors (JLTs), continuous in all operation regimes. To describe short-channel transistors, short-channel effects (SCEs), such as increase of the channel potential due to drain bias, carrier velocity saturation and mobility degradation due to vertical and longitudinal electric fields, are included in a previous model developed for long-channel double-gate JLTs. To validate the model, an analysis is made by using three-dimensional numerical simulations performed in a Sentaurus Device Simulator from Synopsys. Different doping concentrations, channel widths and channel lengths are considered in this work. Besides that, the series resistance influence is numerically included and validated for a wide range of source and drain extensions. In order to check if the SCEs are appropriately described, besides drain current, transconductance and output conductance characteristics, the following parameters are analyzed to demonstrate the good agreement between model and simulation and the SCEs occurrence in this technology: threshold voltage (V TH ), subthreshold slope (S) and drain induced barrier lowering. (paper)

An item response theory analysis of Harter’s self-perception profile for children or why strong clinical scales should be distrusted

NARCIS (Netherlands)

Egberink, I.J.L.; Meijer, R.R.

2011-01-01

The authors investigated the psychometric properties of the subscales of the Self-Perception Profile for Children with item response theory (IRT) models using a sample of 611 children. Results from a nonparametric Mokken analysis and a parametric IRT approach for boys (n = 268) and girls (n = 343)

An item response theory analysis of Harter's Self-Perception Profile for Children or why strong clinical scales should be distrusted

NARCIS (Netherlands)

Egberink, Iris J. L.; Meijer, Rob R.

The authors investigated the psychometric properties of the subscales of the Self-Perception Profile for Children with item response theory (IRT) models using a sample of 611 children. Results from a nonparametric Mokken analysis and a parametric IRT approach for boys (n = 268) and girls (n = 343)

Model for safety reports including descriptive examples

International Nuclear Information System (INIS)

1995-12-01

Several safety reports will be produced in the process of planning and constructing the system for disposal of high-level radioactive waste in Sweden. The present report gives a model, with detailed examples, of how these reports should be organized and what steps they should include. In the near future safety reports will deal with the encapsulation plant and the repository. Later reports will treat operation of the handling systems and the repository

The Meaning of Goodness-of-Fit Tests: Commentary on "Goodness-of-Fit Assessment of Item Response Theory Models"

Science.gov (United States)

Thissen, David

2013-01-01

In this commentary, David Thissen states that "Goodness-of-fit assessment for IRT models is maturing; it has come a long way from zero." Thissen then references prior works on "goodness of fit" in the index of Lord and Novick's (1968) classic text; Yen (1984); Drasgow, Levine, Tsien, Williams, and Mead (1995); Chen and…

Modelling a linear PM motor including magnetic saturation

NARCIS (Netherlands)

Polinder, H.; Slootweg, J.G.; Compter, J.C.; Hoeijmakers, M.J.

2002-01-01

The use of linear permanent-magnet (PM) actuators increases in a wide variety of applications because of the high force density, robustness and accuracy. The paper describes the modelling of a linear PM motor applied in, for example, wafer steppers, including magnetic saturation. This is important

Experimental study on infrared radiation temperature field of concrete under uniaxial compression

Science.gov (United States)

Lou, Quan; He, Xueqiu

2018-05-01

Infrared thermography, as a nondestructive, non-contact and real-time monitoring method, has great significance in assessing the stability of concrete structure and monitoring its failure. It is necessary to conduct in depth study on the mechanism and application of infrared radiation (IR) of concrete failure under loading. In this paper, the concrete specimens with size of 100 × 100 × 100 mm were adopted to carry out the uniaxial compressions for the IR tests. The distribution of IR temperatures (IRTs), surface topography of IRT field and the reconstructed IR images were studied. The results show that the IRT distribution follows the Gaussian distribution, and the R2 of Gaussian fitting changes along with the loading time. The abnormities of R2 and AE counts display the opposite variation trends. The surface topography of IRT field is similar to the hyperbolic paraboloid, which is related to the stress distribution in the sample. The R2 of hyperbolic paraboloid fitting presents an upward trend prior to the fracture which enables to change the IRT field significantly. This R2 has a sharp drop in response to this large destruction. The normalization images of IRT field, including the row and column normalization images, were proposed as auxiliary means to analyze the IRT field. The row and column normalization images respectively show the transverse and longitudinal distribution of the IRT field, and they have clear responses to the destruction occurring on the sample surface. In this paper, the new methods and quantitative index were proposed for the analysis of IRT field, which have some theoretical and instructive significance for the analysis of the characteristics of IRT field, as well as the monitoring of instability and failure for concrete structure.

Practical Guide to Conducting an Item Response Theory Analysis

Science.gov (United States)

Toland, Michael D.

2014-01-01

Item response theory (IRT) is a psychometric technique used in the development, evaluation, improvement, and scoring of multi-item scales. This pedagogical article provides the necessary information needed to understand how to conduct, interpret, and report results from two commonly used ordered polytomous IRT models (Samejima's graded…

An Instructional Module on Mokken Scale Analysis

Science.gov (United States)

Wind, Stefanie A.

2017-01-01

Mokken scale analysis (MSA) is a probabilistic-nonparametric approach to item response theory (IRT) that can be used to evaluate fundamental measurement properties with less strict assumptions than parametric IRT models. This instructional module provides an introduction to MSA as a probabilistic-nonparametric framework in which to explore…

IRT models with relaxed assumptions in eRm: A manual-like instruction

Directory of Open Access Journals (Sweden)

REINHOLD HATZINGER

2009-03-01

Full Text Available Linear logistic models with relaxed assumptions (LLRA as introduced by Fischer (1974 are a flexible tool for the measurement of change for dichotomous or polytomous responses. As opposed to the Rasch model, assumptions on dimensionality of items, their mutual dependencies and the distribution of the latent trait in the population of subjects are relaxed. Conditional maximum likelihood estimation allows for inference about treatment, covariate or trend effect parameters without taking the subjects' latent trait values into account. In this paper we will show how LLRAs based on the LLTM, LRSM and LPCM can be used to answer various questions about the measurement of change and how they can be fitted in R using the eRm package. A number of small didactic examples is provided that can easily be used as templates for real data sets. All datafiles used in this paper are available from http://eRm.R-Forge.R-project.org/

Effect Size Measures for Differential Item Functioning in a Multidimensional IRT Model

Science.gov (United States)

Suh, Youngsuk

2016-01-01

This study adapted an effect size measure used for studying differential item functioning (DIF) in unidimensional tests and extended the measure to multidimensional tests. Two effect size measures were considered in a multidimensional item response theory model: signed weighted P-difference and unsigned weighted P-difference. The performance of…

Olkiluoto surface hydrological modelling: Update 2012 including salt transport modelling

International Nuclear Information System (INIS)

Karvonen, T.

2013-11-01

Posiva Oy is responsible for implementing a final disposal program for spent nuclear fuel of its owners Teollisuuden Voima Oyj and Fortum Power and Heat Oy. The spent nuclear fuel is planned to be disposed at a depth of about 400-450 meters in the crystalline bedrock at the Olkiluoto site. Leakages located at or close to spent fuel repository may give rise to the upconing of deep highly saline groundwater and this is a concern with regard to the performance of the tunnel backfill material after the closure of the tunnels. Therefore a salt transport sub-model was added to the Olkiluoto surface hydrological model (SHYD). The other improvements include update of the particle tracking algorithm and possibility to estimate the influence of open drillholes in a case where overpressure in inflatable packers decreases causing a hydraulic short-circuit between hydrogeological zones HZ19 and HZ20 along the drillhole. Four new hydrogeological zones HZ056, HZ146, BFZ100 and HZ039 were added to the model. In addition, zones HZ20A and HZ20B intersect with each other in the new structure model, which influences salinity upconing caused by leakages in shafts. The aim of the modelling of long-term influence of ONKALO, shafts and repository tunnels provide computational results that can be used to suggest limits for allowed leakages. The model input data included all the existing leakages into ONKALO (35-38 l/min) and shafts in the present day conditions. The influence of shafts was computed using eight different values for total shaft leakage: 5, 11, 20, 30, 40, 50, 60 and 70 l/min. The selection of the leakage criteria for shafts was influenced by the fact that upconing of saline water increases TDS-values close to the repository areas although HZ20B does not intersect any deposition tunnels. The total limit for all leakages was suggested to be 120 l/min. The limit for HZ20 zones was proposed to be 40 l/min: about 5 l/min the present day leakages to access tunnel, 25 l/min from

Olkiluoto surface hydrological modelling: Update 2012 including salt transport modelling

Energy Technology Data Exchange (ETDEWEB)

Karvonen, T. [WaterHope, Helsinki (Finland)

2013-11-15

Posiva Oy is responsible for implementing a final disposal program for spent nuclear fuel of its owners Teollisuuden Voima Oyj and Fortum Power and Heat Oy. The spent nuclear fuel is planned to be disposed at a depth of about 400-450 meters in the crystalline bedrock at the Olkiluoto site. Leakages located at or close to spent fuel repository may give rise to the upconing of deep highly saline groundwater and this is a concern with regard to the performance of the tunnel backfill material after the closure of the tunnels. Therefore a salt transport sub-model was added to the Olkiluoto surface hydrological model (SHYD). The other improvements include update of the particle tracking algorithm and possibility to estimate the influence of open drillholes in a case where overpressure in inflatable packers decreases causing a hydraulic short-circuit between hydrogeological zones HZ19 and HZ20 along the drillhole. Four new hydrogeological zones HZ056, HZ146, BFZ100 and HZ039 were added to the model. In addition, zones HZ20A and HZ20B intersect with each other in the new structure model, which influences salinity upconing caused by leakages in shafts. The aim of the modelling of long-term influence of ONKALO, shafts and repository tunnels provide computational results that can be used to suggest limits for allowed leakages. The model input data included all the existing leakages into ONKALO (35-38 l/min) and shafts in the present day conditions. The influence of shafts was computed using eight different values for total shaft leakage: 5, 11, 20, 30, 40, 50, 60 and 70 l/min. The selection of the leakage criteria for shafts was influenced by the fact that upconing of saline water increases TDS-values close to the repository areas although HZ20B does not intersect any deposition tunnels. The total limit for all leakages was suggested to be 120 l/min. The limit for HZ20 zones was proposed to be 40 l/min: about 5 l/min the present day leakages to access tunnel, 25 l/min from

Assessment of Teacher Perceived Skill in Classroom Assessment Practices Using IRT Models

Science.gov (United States)

Koloi-Keaikitse, Setlhomo

2017-01-01

The purpose of this study was to assess teacher perceived skill in classroom assessment practices. Data were collected from a sample of (N = 691) teachers selected from government primary, junior secondary, and senior secondary schools in Botswana. Item response theory models were used to identify teacher response on items that measured their…

Statistical Indexes for Monitoring Item Behavior under Computer Adaptive Testing Environment.

Science.gov (United States)

Zhu, Renbang; Yu, Feng; Liu, Su

A computerized adaptive test (CAT) administration usually requires a large supply of items with accurately estimated psychometric properties, such as item response theory (IRT) parameter estimates, to ensure the precision of examinee ability estimation. However, an estimated IRT model of a given item in any given pool does not always correctly…

Applying Item Response Theory to the Development of a Screening Adaptation of the Goldman-Fristoe Test of Articulation-Second Edition

Science.gov (United States)

Brackenbury, Tim; Zickar, Michael J.; Munson, Benjamin; Storkel, Holly L.

2017-01-01

Purpose: Item response theory (IRT) is a psychometric approach to measurement that uses latent trait abilities (e.g., speech sound production skills) to model performance on individual items that vary by difficulty and discrimination. An IRT analysis was applied to preschoolers' productions of the words on the Goldman-Fristoe Test of…

Study of a diffusion flamelet model, with preferential diffusion effects included

NARCIS (Netherlands)

Delhaye, S.; Somers, L.M.T.; Bongers, H.; Oijen, van J.A.; Goey, de L.P.H.; Dias, V.

2005-01-01

The non-premixed flamelet model of Peters [1] (model1), which does not include preferential diffusion effects is investigated. Two similar models are presented, but without the assumption of unity Lewis numbers. One of these models was derived by Peters & Pitsch [2] (model2), while the other one was

International Review Team (IRT) Safety Case Recommendations for the Yucca Mountain Total System Performance Assessment (TSPA) Supporting the Site Recommendation

International Nuclear Information System (INIS)

Van Luik, Abraham E.

2004-01-01

The session started with Abe Van Luik (IGSC Chair, US-DOE-YM, USA) who presented the feedback of the international peer review of the US-DOE Yucca Mountain TSPA (Total System Performance Assessment) supporting the successful designation of the site by the Congress and the President of the U.S. In particular, he listed key implications of the IRT (International Review team) recommendations on the forthcoming US-DOE documentation of its case for safety to be submitted to the regulator, the U.S. Nuclear Regulatory Commission, mainly: - The documentation submitted to the licensing authority should address technical aspects and compliance with regulatory criteria. - That documentation should reflect sound science and good engineering practice; it should present detailed and rigorous modelling. - In addition, it should present both quantitative and qualitative arguments, make a statement on why there can be confidence in the face of uncertainty, acknowledge remaining issues and provide the strategy to resolve them. - Demonstrating understanding is as important as demonstrating compliance. - There is a need to provide a clear explanation of the case made to the regulator for more general audiences to complement the large amount of technical documents that will be produced. The US-DOE response to these recommendations for the License Application, which is under preparation, is that the recommendations will be implemented to the maximum extent possible. In subsequent discussion, with respect to the License Application, it was acknowledged that detailed guidance from the U.S. regulator was very useful, and guidance of this type would be generally useful. At the current time, the words 'safety case' are not mentioned in U.S. regulations, but if one reads both the regulation and guidance documents it becomes evident that all aspects of a safety case need to be provided in the License Application and its accompanying documents

SEEPAGE MODEL FOR PA INCLUDING DRIFT COLLAPSE

International Nuclear Information System (INIS)

C. Tsang

2004-01-01

The purpose of this report is to document the predictions and analyses performed using the seepage model for performance assessment (SMPA) for both the Topopah Spring middle nonlithophysal (Tptpmn) and lower lithophysal (Tptpll) lithostratigraphic units at Yucca Mountain, Nevada. Look-up tables of seepage flow rates into a drift (and their uncertainty) are generated by performing numerical simulations with the seepage model for many combinations of the three most important seepage-relevant parameters: the fracture permeability, the capillary-strength parameter 1/a, and the percolation flux. The percolation flux values chosen take into account flow focusing effects, which are evaluated based on a flow-focusing model. Moreover, multiple realizations of the underlying stochastic permeability field are conducted. Selected sensitivity studies are performed, including the effects of an alternative drift geometry representing a partially collapsed drift from an independent drift-degradation analysis (BSC 2004 [DIRS 166107]). The intended purpose of the seepage model is to provide results of drift-scale seepage rates under a series of parameters and scenarios in support of the Total System Performance Assessment for License Application (TSPA-LA). The SMPA is intended for the evaluation of drift-scale seepage rates under the full range of parameter values for three parameters found to be key (fracture permeability, the van Genuchten 1/a parameter, and percolation flux) and drift degradation shape scenarios in support of the TSPA-LA during the period of compliance for postclosure performance [Technical Work Plan for: Performance Assessment Unsaturated Zone (BSC 2002 [DIRS 160819], Section I-4-2-1)]. The flow-focusing model in the Topopah Spring welded (TSw) unit is intended to provide an estimate of flow focusing factors (FFFs) that (1) bridge the gap between the mountain-scale and drift-scale models, and (2) account for variability in local percolation flux due to

Atmosphere-soil-vegetation model including CO2 exchange processes: SOLVEG2

International Nuclear Information System (INIS)

Nagai, Haruyasu

2004-11-01

A new atmosphere-soil-vegetation model named SOLVEG2 (SOLVEG version 2) was developed to study the heat, water, and CO 2 exchanges between the atmosphere and land-surface. The model consists of one-dimensional multilayer sub-models for the atmosphere, soil, and vegetation. It also includes sophisticated processes for solar and long-wave radiation transmission in vegetation canopy and CO 2 exchanges among the atmosphere, soil, and vegetation. Although the model usually simulates only vertical variation of variables in the surface-layer atmosphere, soil, and vegetation canopy by using meteorological data as top boundary conditions, it can be used by coupling with a three-dimensional atmosphere model. In this paper, details of SOLVEG2, which includes the function of coupling with atmosphere model MM5, are described. (author)

Exclusive queueing model including the choice of service windows

Science.gov (United States)

Tanaka, Masahiro; Yanagisawa, Daichi; Nishinari, Katsuhiro

2018-01-01

In a queueing system involving multiple service windows, choice behavior is a significant concern. This paper incorporates the choice of service windows into a queueing model with a floor represented by discrete cells. We contrived a logit-based choice algorithm for agents considering the numbers of agents and the distances to all service windows. Simulations were conducted with various parameters of agent choice preference for these two elements and for different floor configurations, including the floor length and the number of service windows. We investigated the model from the viewpoint of transit times and entrance block rates. The influences of the parameters on these factors were surveyed in detail and we determined that there are optimum floor lengths that minimize the transit times. In addition, we observed that the transit times were determined almost entirely by the entrance block rates. The results of the presented model are relevant to understanding queueing systems including the choice of service windows and can be employed to optimize facility design and floor management.

Negative affectivity and social inhibition in cardiovascular disease: evaluating type-D personality and its assessment using item response theory.

Science.gov (United States)

Emons, Wilco H M; Meijer, Rob R; Denollet, Johan

2007-07-01

Individuals with increased levels of both negative affectivity (NA) and social inhibition (SI)-referred to as type-D personality-are at increased risk of adverse cardiac events. We used item response theory (IRT) to evaluate NA, SI, and type-D personality as measured by the DS14. The objectives of this study were (a) to evaluate the relative contribution of individual items to the measurement precision at the cutoff to distinguish type-D from non-type-D personality and (b) to investigate the comparability of NA, SI, and type-D constructs across the general population and clinical populations. Data from representative samples including 1316 respondents from the general population, 427 respondents diagnosed with coronary heart disease, and 732 persons suffering from hypertension were analyzed using the graded response IRT model. In Study 1, the information functions obtained in the IRT analysis showed that (a) all items had highest measurement precision around the cutoff and (b) items are most informative at the higher end of the scale. In Study 2, the IRT analysis showed that measurements were fairly comparable across the general population and clinical populations. The DS14 adequately measures NA and SI, with highest reliability in the trait range around the cutoff. The DS14 is a valid instrument to assess and compare type-D personality across clinical groups.

Interval timing under a behavioral microscope: Dissociating motivational and timing processes in fixed-interval performance.

Science.gov (United States)

Daniels, Carter W; Sanabria, Federico

2017-03-01

The distribution of latencies and interresponse times (IRTs) of rats was compared between two fixed-interval (FI) schedules of food reinforcement (FI 30 s and FI 90 s), and between two levels of food deprivation. Computational modeling revealed that latencies and IRTs were well described by mixture probability distributions embodying two-state Markov chains. Analysis of these models revealed that only a subset of latencies is sensitive to the periodicity of reinforcement, and prefeeding only reduces the size of this subset. The distribution of IRTs suggests that behavior in FI schedules is organized in bouts that lengthen and ramp up in frequency with proximity to reinforcement. Prefeeding slowed down the lengthening of bouts and increased the time between bouts. When concatenated, latency and IRT models adequately reproduced sigmoidal FI response functions. These findings suggest that behavior in FI schedules fluctuates in and out of schedule control; an account of such fluctuation suggests that timing and motivation are dissociable components of FI performance. These mixture-distribution models also provide novel insights on the motivational, associative, and timing processes expressed in FI performance. These processes may be obscured, however, when performance in timing tasks is analyzed in terms of mean response rates.

Optimization of radio-therapeutic treatment and the program of quality assurance in ionizing radiation therapy

International Nuclear Information System (INIS)

Rosca, A.; Bahnarel, I.; Coretchi, L.

2015-01-01

The Program of Quality Assurance (PQA) in Ionizing Radiation Therapy (IRT) addresses the most important problems of assuring the quality of IRT utilization in the treatment of patients with neoplasm. In this context, the IRT value grows considerably, hence the implementation of PQA is of great significance. The study concentrates on a detailed description of the PQA as concerns the activity involving IRT devices applied in the IRT departments (rooms) of public medical/sanitary institutions, science research institutions etc., where IRT is employed using technogenic sources and ionizing radiation generators. For the performing of the study, annual statistics reports about the activity of the IRT, and data of Cancer Registry of the Oncologic Institute of the Republic of Moldova were analyzed. The work also includes an in-depth description of the personnel categories involved in PQA, possible errors in radiotherapy, the responsibilities of the bioengineer in this program, importance of source calibration, the impact of the quality control in PQA, the role of topometric training, the interaction between the medical and technical personnel and the patient. Optimization of IRT is very important and necessary in the Republic of Moldova. PQA incontestably contributes to reducing specialist's errors in planning correct treatment, dictates the need of team work and proper delegation of the responsibilities in co-optation of other professionals, performance of duty of bioengineering, the influence of quality control of profile installations, meaning accurate topographic planning, applying several methods of work, quality assurance program assuming the major importance. (authors)

Comparison of immunoreactive serum trypsinogen and lipase in Cystic Fibrosis

International Nuclear Information System (INIS)

Lloyd-Still, J.D.; Weiss, S.; Wessel, H.; Fong, L.; Conway, J.J.

1984-01-01

The incidence of Cystic Fibrosis (CF) is 1 in 2,000. Early detection and treatment of CF may necessitate newborn screening with a reliable and cost-effective test. Serum immunoreactive trypsinogen (IRT) an enzyme produced by the pancreas, is detectable by radioimmunoassay (RIA) techniques. Recently, it has been shown that IRT is elevated in CF infants for the first few months of life and levels become subnormal as pancreatic insufficiency progresses. Other enzymes produced by the pancreas, such as lipase, are also elevated during this time. The author's earlier work confirmed previous reports of elevated IRT levels in CF infants. The development of a new RIA for lipase (nuclipase) has enabled comparison of these 2 pancreatic enzymes in C.F. Serum IRT and lipase determinations were performed on 2 groups of CF patients; infants under 1 year of age, and children between 1 and 18 years of age. Control populations of the same age groups were included. The results showed that both trypsin (161 +- 92 ng/ml, range 20 to 400) and lipase (167 +- 151 ng/ml, range 29 to 500) are elevated in CF in the majority of infants. Control infants had values of IRT ranging from 20 to 29.5 ng/ml and lipase values ranging from 23 to 34 ng/ml. IRT becomes subnormal in most CF patients by 8 years of age as pancreatic function insufficiency increases. Lipase levels and IRT levels correlate well in infancy, but IRT is a more sensitive indicator of pancreatic insufficiency in older patients with CF

Measuring Constructs in Family Science: How Can Item Response Theory Improve Precision and Validity?

Science.gov (United States)

Gordon, Rachel A.

2015-01-01

This article provides family scientists with an understanding of contemporary measurement perspectives and the ways in which item response theory (IRT) can be used to develop measures with desired evidence of precision and validity for research uses. The article offers a nontechnical introduction to some key features of IRT, including its…

Differential item functioning analysis with ordinal logistic regression techniques. DIFdetect and difwithpar.

Science.gov (United States)

Crane, Paul K; Gibbons, Laura E; Jolley, Lance; van Belle, Gerald

2006-11-01

We present an ordinal logistic regression model for identification of items with differential item functioning (DIF) and apply this model to a Mini-Mental State Examination (MMSE) dataset. We employ item response theory ability estimation in our models. Three nested ordinal logistic regression models are applied to each item. Model testing begins with examination of the statistical significance of the interaction term between ability and the group indicator, consistent with nonuniform DIF. Then we turn our attention to the coefficient of the ability term in models with and without the group term. If including the group term has a marked effect on that coefficient, we declare that it has uniform DIF. We examined DIF related to language of test administration in addition to self-reported race, Hispanic ethnicity, age, years of education, and sex. We used PARSCALE for IRT analyses and STATA for ordinal logistic regression approaches. We used an iterative technique for adjusting IRT ability estimates on the basis of DIF findings. Five items were found to have DIF related to language. These same items also had DIF related to other covariates. The ordinal logistic regression approach to DIF detection, when combined with IRT ability estimates, provides a reasonable alternative for DIF detection. There appear to be several items with significant DIF related to language of test administration in the MMSE. More attention needs to be paid to the specific criteria used to determine whether an item has DIF, not just the technique used to identify DIF.

Key Characteristics of Combined Accident including TLOFW accident for PSA Modeling

Energy Technology Data Exchange (ETDEWEB)

Kim, Bo Gyung; Kang, Hyun Gook [KAIST, Daejeon (Korea, Republic of); Yoon, Ho Joon [Khalifa University of Science, Technology and Research, Abu Dhabi (United Arab Emirates)

2015-05-15

The conventional PSA techniques cannot adequately evaluate all events. The conventional PSA models usually focus on single internal events such as DBAs, the external hazards such as fire, seismic. However, the Fukushima accident of Japan in 2011 reveals that very rare event is necessary to be considered in the PSA model to prevent the radioactive release to environment caused by poor treatment based on lack of the information, and to improve the emergency operation procedure. Especially, the results from PSA can be used to decision making for regulators. Moreover, designers can consider the weakness of plant safety based on the quantified results and understand accident sequence based on human actions and system availability. This study is for PSA modeling of combined accidents including total loss of feedwater (TLOFW) accident. The TLOFW accident is a representative accident involving the failure of cooling through secondary side. If the amount of heat transfer is not enough due to the failure of secondary side, the heat will be accumulated to the primary side by continuous core decay heat. Transients with loss of feedwater include total loss of feedwater accident, loss of condenser vacuum accident, and closure of all MSIVs. When residual heat removal by the secondary side is terminated, the safety injection into the RCS with direct primary depressurization would provide alternative heat removal. This operation is called feed and bleed (F and B) operation. Combined accidents including TLOFW accident are very rare event and partially considered in conventional PSA model. Since the necessity of F and B operation is related to plant conditions, the PSA modeling for combined accidents including TLOFW accident is necessary to identify the design and operational vulnerabilities.The PSA is significant to assess the risk of NPPs, and to identify the design and operational vulnerabilities. Even though the combined accident is very rare event, the consequence of combined

In-flight investigations of the unsteady behaviour of the boundary layer with infrared thermography

Science.gov (United States)

Szewczyk, Mariusz; Smusz, Robert; de Groot, Klaus; Meyer, Joerg; Kucaba-Pietal, Anna; Rzucidlo, Pawel

2017-04-01

Infrared thermography (IRT) has been well established in wind tunnel and flight tests for the last decade. Former applications of IRT were focused, in nearly all cases, on steady measurements. In the last years, requirements of unsteady IRT measurements (up to 10 Hz) have been formulated, but the problem of a very slow thermal response of common materials of wind tunnel models or airplane components has to be overcome by finding a surface modification with a fast thermal response (low heat capacity, low thermal conductivity and high thermal diffusivity). Therefore, lab investigations of potential material combinations and flight tests with a ‘low cost’ aircraft, i.e. a glider with a modified wing surface, were conducted. In order to induce unsteady conditions (rapid change of laminar-turbulent boundary layer transition), special maneuvers of a glider during IRT measurements were performed.

In-flight investigations of the unsteady behaviour of the boundary layer with infrared thermography

International Nuclear Information System (INIS)

Szewczyk, Mariusz; Smusz, Robert; Kucaba-Pietal, Anna; Rzucidlo, Pawel; De Groot, Klaus; Meyer, Joerg

2017-01-01

Infrared thermography (IRT) has been well established in wind tunnel and flight tests for the last decade. Former applications of IRT were focused, in nearly all cases, on steady measurements. In the last years, requirements of unsteady IRT measurements (up to 10 Hz) have been formulated, but the problem of a very slow thermal response of common materials of wind tunnel models or airplane components has to be overcome by finding a surface modification with a fast thermal response (low heat capacity, low thermal conductivity and high thermal diffusivity). Therefore, lab investigations of potential material combinations and flight tests with a ‘low cost’ aircraft, i.e. a glider with a modified wing surface, were conducted. In order to induce unsteady conditions (rapid change of laminar-turbulent boundary layer transition), special maneuvers of a glider during IRT measurements were performed. (paper)

Better assessment of physical function: item improvement is neglected but essential.

Science.gov (United States)

Bruce, Bonnie; Fries, James F; Ambrosini, Debbie; Lingala, Bharathi; Gandek, Barbara; Rose, Matthias; Ware, John E

2009-01-01

Physical function is a key component of patient-reported outcome (PRO) assessment in rheumatology. Modern psychometric methods, such as Item Response Theory (IRT) and Computerized Adaptive Testing, can materially improve measurement precision at the item level. We present the qualitative and quantitative item-evaluation process for developing the Patient Reported Outcomes Measurement Information System (PROMIS) Physical Function item bank. The process was stepwise: we searched extensively to identify extant Physical Function items and then classified and selectively reduced the item pool. We evaluated retained items for content, clarity, relevance and comprehension, reading level, and translation ease by experts and patient surveys, focus groups, and cognitive interviews. We then assessed items by using classic test theory and IRT, used confirmatory factor analyses to estimate item parameters, and graded response modeling for parameter estimation. We retained the 20 Legacy (original) Health Assessment Questionnaire Disability Index (HAQ-DI) and the 10 SF-36's PF-10 items for comparison. Subjects were from rheumatoid arthritis, osteoarthritis, and healthy aging cohorts (n = 1,100) and a national Internet sample of 21,133 subjects. We identified 1,860 items. After qualitative and quantitative evaluation, 124 newly developed PROMIS items composed the PROMIS item bank, which included revised Legacy items with good fit that met IRT model assumptions. Results showed that the clearest and best-understood items were simple, in the present tense, and straightforward. Basic tasks (like dressing) were more relevant and important versus complex ones (like dancing). Revised HAQ-DI and PF-10 items with five response options had higher item-information content than did comparable original Legacy items with fewer response options. IRT analyses showed that the Physical Function domain satisfied general criteria for unidimensionality with one-, two-, three-, and four-factor models

Further Empirical Results on Parametric Versus Non-Parametric IRT Modeling of Likert-Type Personality Data

Science.gov (United States)

Maydeu-Olivares, Albert

2005-01-01

Chernyshenko, Stark, Chan, Drasgow, and Williams (2001) investigated the fit of Samejima's logistic graded model and Levine's non-parametric MFS model to the scales of two personality questionnaires and found that the graded model did not fit well. We attribute the poor fit of the graded model to small amounts of multidimensionality present in…

Using a hybrid subtyping model to capture patterns and dimensionality of depressive and anxiety symptomatology in the general population.

Science.gov (United States)

Wardenaar, Klaas J; Wanders, Rob B K; Ten Have, Margreet; de Graaf, Ron; de Jonge, Peter

2017-06-01

Researchers have tried to identify more homogeneous subtypes of major depressive disorder (MDD) with latent class analyses (LCA). However, this approach does no justice to the dimensional nature of psychopathology. In addition, anxiety and functioning-levels have seldom been integrated in subtyping efforts. Therefore, this study used a hybrid discrete-dimensional approach to identify subgroups with shared patterns of depressive and anxiety symptomatology, while accounting for functioning-levels. The Comprehensive International Diagnostic Interview (CIDI) 1.1 was used to assess previous-year depressive and anxiety symptoms in the Netherlands Mental Health Survey and Incidence Study-1 (NEMESIS-1; n=5583). The data were analyzed with factor analyses, LCA and hybrid mixed-measurement item response theory (MM-IRT) with and without functioning covariates. Finally, the classes' predictors (measured one year earlier) and outcomes (measured two years later) were investigated. A 3-class MM-IRT model with functioning covariates best described the data and consisted of a 'healthy class' (74.2%) and two symptomatic classes ('sleep/energy' [13.4%]; 'mood/anhedonia' [12.4%]). Factors including older age, urbanicity, higher severity and presence of 1-year MDD predicted membership of either symptomatic class vs. the healthy class. Both symptomatic classes showed poorer 2-year outcomes (i.e. disorders, poor functioning) than the healthy class. The odds of MDD after two years were especially increased in the mood/anhedonia class. Symptoms were assessed for the past year whereas current functioning was assessed. Heterogeneity of depression and anxiety symptomatology are optimally captured by a hybrid discrete-dimensional subtyping model. Importantly, accounting for functioning-levels helps to capture clinically relevant interpersonal differences. Copyright © 2017 Elsevier B.V. All rights reserved.

A dynamic Thurstonian item response theory of motive expression in the picture story exercise: solving the internal consistency paradox of the PSE.

Science.gov (United States)

Lang, Jonas W B

2014-07-01

The measurement of implicit or unconscious motives using the picture story exercise (PSE) has long been a target of debate in the psychological literature. Most debates have centered on the apparent paradox that PSE measures of implicit motives typically show low internal consistency reliability on common indices like Cronbach's alpha but nevertheless predict behavioral outcomes. I describe a dynamic Thurstonian item response theory (IRT) model that builds on dynamic system theories of motivation, theorizing on the PSE response process, and recent advancements in Thurstonian IRT modeling of choice data. To assess the models' capability to explain the internal consistency paradox, I first fitted the model to archival data (Gurin, Veroff, & Feld, 1957) and then simulated data based on bias-corrected model estimates from the real data. Simulation results revealed that the average squared correlation reliability for the motives in the Thurstonian IRT model was .74 and that Cronbach's alpha values were similar to the real data (value of extant evidence from motivational research using PSE motive measures. (c) 2014 APA, all rights reserved.

Channel modelling for free-space optical inter-HAP links using adaptive ARQ transmission

Science.gov (United States)

Parthasarathy, S.; Giggenbach, D.; Kirstädter, A.

2014-10-01

Free-space optical (FSO) communication systems have seen significant developments in recent years due to growing need for very high data rates and tap-proof communication. The operation of an FSO link is suited to diverse variety of applications such as satellites, High Altitude Platforms (HAPs), Unmanned Aerial Vehicles (UAVs), aircrafts, ground stations and other areas involving both civil and military situations. FSO communication systems face challenges due to different effects of the atmospheric channel. FSO channel primarily suffers from scintillation effects due to Index of Refraction Turbulence (IRT). In addition, acquisition and pointing becomes more difficult because of the high directivity of the transmitted beam: Miss-pointing of the transmitted beam and tracking errors at the receiver generate additional fading of the optical signal. High Altitude Platforms (HAPs) are quasi-stationary vehicles operating in the stratosphere. The slowly varying but precisely determined time-of-flight of the Inter-HAP channel adds to its characteristics. To propose a suitable ARQ scheme, proper theoretical understanding of the optical atmospheric propagation and modeling of a specific scenario FSO channel is required. In this paper, a bi-directional symmetrical Inter-HAP link has been selected and modeled. The Inter-HAP channel model is then investigated via simulations in terms of optical scintillation induced by IRT and in presence of pointing error. The performance characteristic of the model is then quantified in terms of fading statistics from which the Packet Error Probability (PEP) is calculated. Based on the PEP characteristics, we propose suitable ARQ schemes.

RELAP5-3D Code Includes ATHENA Features and Models

International Nuclear Information System (INIS)

Riemke, Richard A.; Davis, Cliff B.; Schultz, Richard R.

2006-01-01

Version 2.3 of the RELAP5-3D computer program includes all features and models previously available only in the ATHENA version of the code. These include the addition of new working fluids (i.e., ammonia, blood, carbon dioxide, glycerol, helium, hydrogen, lead-bismuth, lithium, lithium-lead, nitrogen, potassium, sodium, and sodium-potassium) and a magnetohydrodynamic model that expands the capability of the code to model many more thermal-hydraulic systems. In addition to the new working fluids along with the standard working fluid water, one or more noncondensable gases (e.g., air, argon, carbon dioxide, carbon monoxide, helium, hydrogen, krypton, nitrogen, oxygen, SF 6 , xenon) can be specified as part of the vapor/gas phase of the working fluid. These noncondensable gases were in previous versions of RELAP5-3D. Recently four molten salts have been added as working fluids to RELAP5-3D Version 2.4, which has had limited release. These molten salts will be in RELAP5-3D Version 2.5, which will have a general release like RELAP5-3D Version 2.3. Applications that use these new features and models are discussed in this paper. (authors)

Avaliação de atitudes de estudantes de psicologia via modelo de crédito parcial da TRI Assessment of psychology students' attitudes through credit partial model of IRT

Directory of Open Access Journals (Sweden)

Claudette Maria Medeiros Vendramini

2009-12-01

Full Text Available O objetivo deste trabalho foi avaliar as atitudes de estudantes de Psicologia em relação a estatística, via modelo de créditos parciais da TRI, e suas relações com a autopercepção e desempenho em estatística. Uma amostra não aleatória de 361 estudantes de Psicologia, com idades de 18 a 65 anos, 81% mulheres e 53% do noturno, respondeu a um questionário de identificação e uma escala de atitudes. A escala é do tipo likert de quatro pontos e composta de 20 itens que expressam os sentimentos em relação a estatística, sendo dez positivos e dez negativos, e um item complementar, que verifica a autopercepção do universitário em relação ao próprio desempenho em estatística. Observou-se que a escala é fidedigna e válida para medir as atitudes. Os participantes apresentaram atitudes ligeiramente mais negativas do que positivas. Constatou-se a existência de correlações positivas e significativas entre atitude, desempenho acadêmico e autopercepção de desempenho.The aim of this work was to assess psychology students' attitudes toward statistics trough credit partial model of IRT, and to identify the association among the students' attitudes, academic performance, and self-perception in Statistics. A not random sample of 361 Psychology students answered the identification questionnaire and the attitudes scale towards Statistics. The students aged 18-65, 81% were female and 53% from evening classes. The likert scale is composed of 20 items, ten positives and ten negatives, which express the feelings towards Statistics. There is one item which verifies the university student's self-perception towards its own performance in Statistics. It was observed that the scale was reliable and valid to measure attitudes. The students presented their attitudes slightly more negative than positive. It was noticed the existence of positive and significant correlations among attitudes, academic performance and performance self-perception.

Evaluating the validity of the Work Role Functioning Questionnaire (Canadian French version) using classical test theory and item response theory.

Science.gov (United States)

Hong, Quan Nha; Coutu, Marie-France; Berbiche, Djamal

2017-01-01

The Work Role Functioning Questionnaire (WRFQ) was developed to assess workers' perceived ability to perform job demands and is used to monitor presenteeism. Still few studies on its validity can be found in the literature. The purpose of this study was to assess the items and factorial composition of the Canadian French version of the WRFQ (WRFQ-CF). Two measurement approaches were used to test the WRFQ-CF: Classical Test Theory (CTT) and non-parametric Item Response Theory (IRT). A total of 352 completed questionnaires were analyzed. A four-factor and three-factor model models were tested and shown respectively good fit with 14 items (Root Mean Square Error of Approximation (RMSEA) = 0.06, Standardized Root Mean Square Residual (SRMR) = 0.04, Bentler Comparative Fit Index (CFI) = 0.98) and with 17 items (RMSEA = 0.059, SRMR = 0.048, CFI = 0.98). Using IRT, 13 problematic items were identified, of which 9 were common with CTT. This study tested different models with fewer problematic items found in a three-factor model. Using a non-parametric IRT and CTT for item purification gave complementary results. IRT is still scarcely used and can be an interesting alternative method to enhance the quality of a measurement instrument. More studies are needed on the WRFQ-CF to refine its items and factorial composition.

Effects of Initial Values and Convergence Criterion in the Two-Parameter Logistic Model When Estimating the Latent Distribution in BILOG-MG 3.

Directory of Open Access Journals (Sweden)

Ingo W Nader

Full Text Available Parameters of the two-parameter logistic model are generally estimated via the expectation-maximization algorithm, which improves initial values for all parameters iteratively until convergence is reached. Effects of initial values are rarely discussed in item response theory (IRT, but initial values were recently found to affect item parameters when estimating the latent distribution with full non-parametric maximum likelihood. However, this method is rarely used in practice. Hence, the present study investigated effects of initial values on item parameter bias and on recovery of item characteristic curves in BILOG-MG 3, a widely used IRT software package. Results showed notable effects of initial values on item parameters. For tighter convergence criteria, effects of initial values decreased, but item parameter bias increased, and the recovery of the latent distribution worsened. For practical application, it is advised to use the BILOG default convergence criterion with appropriate initial values when estimating the latent distribution from data.

Multimodal Education: A Model with Promise.

Science.gov (United States)

Gerler, Edwin R., Jr.; Locke, Don C.

1980-01-01

Describes a program that uses Lazarus's factors that contribute to human growth and development as the basis for its program. The modalities covered are given the headings behavior, affect, sensation and imagery, cognition, interpersonal, and diet/physiology. (IRT)

Improving weather predictability by including land-surface model parameter uncertainty

Science.gov (United States)

Orth, Rene; Dutra, Emanuel; Pappenberger, Florian

2016-04-01

The land surface forms an important component of Earth system models and interacts nonlinearly with other parts such as ocean and atmosphere. To capture the complex and heterogenous hydrology of the land surface, land surface models include a large number of parameters impacting the coupling to other components of the Earth system model. Focusing on ECMWF's land-surface model HTESSEL we present in this study a comprehensive parameter sensitivity evaluation using multiple observational datasets in Europe. We select 6 poorly constrained effective parameters (surface runoff effective depth, skin conductivity, minimum stomatal resistance, maximum interception, soil moisture stress function shape, total soil depth) and explore their sensitivity to model outputs such as soil moisture, evapotranspiration and runoff using uncoupled simulations and coupled seasonal forecasts. Additionally we investigate the possibility to construct ensembles from the multiple land surface parameters. In the uncoupled runs we find that minimum stomatal resistance and total soil depth have the most influence on model performance. Forecast skill scores are moreover sensitive to the same parameters as HTESSEL performance in the uncoupled analysis. We demonstrate the robustness of our findings by comparing multiple best performing parameter sets and multiple randomly chosen parameter sets. We find better temperature and precipitation forecast skill with the best-performing parameter perturbations demonstrating representativeness of model performance across uncoupled (and hence less computationally demanding) and coupled settings. Finally, we construct ensemble forecasts from ensemble members derived with different best-performing parameterizations of HTESSEL. This incorporation of parameter uncertainty in the ensemble generation yields an increase in forecast skill, even beyond the skill of the default system. Orth, R., E. Dutra, and F. Pappenberger, 2016: Improving weather predictability by

Collisional-radiative model including recombination processes for W27+ ion★

Science.gov (United States)

Murakami, Izumi; Sasaki, Akira; Kato, Daiji; Koike, Fumihiro

2017-10-01

We have constructed a collisional-radiative (CR) model for W27+ ions including 226 configurations with n ≤ 9 and ł ≤ 5 for spectroscopic diagnostics. We newly include recombination processes in the model and this is the first result of extreme ultraviolet spectrum calculated for recombining plasma component. Calculated spectra in 40-70 Å range in ionizing and recombining plasma components show similar 3 strong lines and 1 line weak in recombining plasma component at 45-50 Å and many weak lines at 50-65 Å for both components. Recombination processes do not contribute much to the spectrum at around 60 Å for W27+ ion. Dielectronic satellite lines are also minor contribution to the spectrum of recombining plasma component. Dielectronic recombination (DR) rate coefficient from W28+ to W27+ ions is also calculated with the same atomic data in the CR model. We found that larger set of energy levels including many autoionizing states gave larger DR rate coefficients but our rate agree within factor 6 with other works at electron temperature around 1 keV in which W27+ and W28+ ions are usually observed in plasmas. Contribution to the Topical Issue "Atomic and Molecular Data and their Applications", edited by Gordon W.F. Drake, Jung-Sik Yoon, Daiji Kato, and Grzegorz Karwasz.

Development of indirect ring tension test for fracture characterization of asphalt mixtures

Science.gov (United States)

Zeinali Siavashani, Alireza

Low temperature cracking is a major distress in asphalt pavements. Several test configurations have been introduced to characterize the fracture properties of hot mix (HMA); however, most are considered to be research tools due to the complexity of the test methods or equipment. This dissertation describes the development of the indirect ring tension (IRT) fracture test for HMA, which was designed to be an effective and user-friendly test that could be deployed at the Department of Transportation level. The primary advantages of this innovative and yet practical test include: relatively large fracture surface test zone, simplicity of the specimen geometry, widespread availability of the required test equipment, and ability to test laboratory compacted specimens as well as field cores. Numerical modeling was utilized to calibrate the stress intensity factor formula of the IRT fracture test for various specimen dimensions. The results of this extensive analysis were encapsulated in a single equation. To develop the test procedure, a laboratory study was conducted to determine the optimal test parameters for HMA material. An experimental plan was then developed to evaluate the capability of the test in capturing the variations in the mix properties, asphalt pavement density, asphalt material aging, and test temperature. Five plant-produced HMA mixtures were used in this extensive study, and the results revealed that the IRT fracture test is highly repeatable, and capable of capturing the variations in the fracture properties of HMA. Furthermore, an analytical model was developed based on the viscoelastic properties of HMA to estimate the maximum allowable crack size for the pavements in the experimental study. This analysis indicated that the low-temperature cracking potential of the asphalt mixtures is highly sensitive to the fracture toughness and brittleness of the HMA material. Additionally, the IRT fracture test data seemed to correlate well with the data from

Item response theory in the production of indicators of socioeconomic metropolitan region of Maringá, Paraná State, Brazil - doi: 10.4025/actascitechnol.v34i4.10478

Directory of Open Access Journals (Sweden)

Vanessa Rufino da Silva

2012-10-01

Full Text Available This study aimed to identify and produce through models of Item Response Theory (IRT a socio-economic indicator based in the items observed in 2000 Census, following the methodology by Soares (2005. By the IRT Methodology, this indicator, as a latent variable, is obtained through the construction of specific models and scales, making it possible to measure this variable, which according to Andrade et al. (2000, IRT analyzes each item which compose the measuring instrument. This case consists of binary or dichotomous items, which assess the possession of certain assets of domestic comfort. The characteristics of each item were analyzed, as the ability to discrimination and income necessary for the possession of certain property. It was concluded that with 13 items, a trustworthy questionnaire can be done for the construction of a socioeconomic index of Maringa’s metropolitan region.

The SF-8 Spanish Version for Health-Related Quality of Life Assessment: Psychometric Study with IRT and CFA Models.

Science.gov (United States)

Tomás, José M; Galiana, Laura; Fernández, Irene

2018-03-22

The aim of current research is to analyze the psychometric properties of the Spanish version of the SF-8, overcoming previous shortcomings. A double line of analyses was used: competitive structural equations models to establish factorial validity, and Item Response theory to analyze item psychometric characteristics and information. 593 people aged 60 years or older, attending long life learning programs at the University were surveyed. Their age ranged from 60 to 92 years old. 67.6% were women. The survey included scales on personality dimensions, attitudes, perceptions, and behaviors related to aging. Competitive confirmatory models pointed out two-factors (physical and mental health) as the best representation of the data: χ2(13) = 72.37 (p < .01); CFI = .99; TLI = .98; RMSEA = .08 (.06, .10). Item 5 was removed because of unreliability and cross-loading. Graded response models showed appropriate fit for two-parameter logistic model both the physical and the mental dimensions. Item Information Curves and Test Information Functions pointed out that the SF-8 was more informative for low levels of health. The Spanish SF-8 has adequate psychometric properties, being better represented by two dimensions, once Item 5 is removed. Gathering evidence on patient-reported outcome measures is of crucial importance, as this type of measurement instruments are increasingly used in clinical arena.

An Introduction to Item Response Theory for Patient-Reported Outcome Measurement

Science.gov (United States)

Nguyen, Tam H.; Han, Hae-Ra; Kim, Miyong T.

2015-01-01

The growing emphasis on patient-centered care has accelerated the demand for high-quality data from patient-reported outcome (PRO) measures. Traditionally, the development and validation of these measures has been guided by classical test theory. However, item response theory (IRT), an alternate measurement framework, offers promise for addressing practical measurement problems found in health-related research that have been difficult to solve through classical methods. This paper introduces foundational concepts in IRT, as well as commonly used models and their assumptions. Existing data on a combined sample (n = 636) of Korean American and Vietnamese American adults who responded to the High Blood Pressure Health Literacy Scale and the Patient Health Questionnaire-9 are used to exemplify typical applications of IRT. These examples illustrate how IRT can be used to improve the development, refinement, and evaluation of PRO measures. Greater use of methods based on this framework can increase the accuracy and efficiency with which PROs are measured. PMID:24403095

Extending Primitive Spatial Data Models to Include Semantics

Science.gov (United States)

Reitsma, F.; Batcheller, J.

2009-04-01

Our traditional geospatial data model involves associating some measurable quality, such as temperature, or observable feature, such as a tree, with a point or region in space and time. When capturing data we implicitly subscribe to some kind of conceptualisation. If we can make this explicit in an ontology and associate it with the captured data, we can leverage formal semantics to reason with the concepts represented in our spatial data sets. To do so, we extend our fundamental representation of geospatial data in a data model by including a URI in our basic data model that links it to our ontology defining our conceptualisation, We thus extend Goodchild et al's geo-atom [1] with the addition of a URI: (x, Z, z(x), URI) . This provides us with pixel or feature level knowledge and the ability to create layers of data from a set of pixels or features that might be drawn from a database based on their semantics. Using open source tools, we present a prototype that involves simple reasoning as a proof of concept. References [1] M.F. Goodchild, M. Yuan, and T.J. Cova. Towards a general theory of geographic representation in gis. International Journal of Geographical Information Science, 21(3):239-260, 2007.

Reactor Radiation Loops as Large Gamma Sources; Boucles d'irradiation des reacteurs nucleaires utilisees comme sources gamma intenses; Radiatsionnye kontury yadernykh reaktorov kak moshchnye gamma-istochniki; Empleo de circuitos de irradiacion de los reactores como fuentes gamma de gran intensidad

Energy Technology Data Exchange (ETDEWEB)

Ryabukhina, Yu. S.

1963-11-15

Since 1957, study and research on the' production of radiation loops has been going on in the Soviet Union. Methods for calculating such systems were worked out and the possibilities of various gamma carriers examined. Indium alloy loops, liquid at room temperature, were first selected for practical experiment. The behaviour of two eutectic indium alloys was studied in relation to certain constructional materials and at the beginning of 1960 the first test indium-gallium loop was operated. Further work led to the installation of a model indium-gallium loop in the IRT reactor of the Georgian SSR Academy of Sciences with an irradiation source activity of 100 g Ra equivalent and a test In-Ga-Sn loop in a channel of the IRT reactor at the Institute of Atomic Energy, USSR Academy of Sciences. Finally in 1962, a pilot In-Ga-Sn loop for semi-industrial radiation processes was put into service in the IRT reactor of the Latvian SSR Academy of Sciences; its maximum irradiation source activity was 30 000 g Ra equivalent. The paper has the following sections: (1) ''Radiation loop calculation'', summarizing the work done on the computation techniques involved. (2) ''A model In-Ga radiation loop for the IRT-2000 reactor in Tbilisi'', describing the loop in operation. (3) ''An In-Ga-Sn radiation loop for the Latvian SSR Academy of Sciences IRT Reactor'', describing the loop in operation. (4) ''Possibilities of further radiation loop development'', describing experiments and systems and giving calculations on the basis of which it is considered possible to build hard manganese and mobile liquid indium-alloy loops. (author) [French] Depuis 1957, on execute en Union sovietique des travaux en vue d'etudier et de construire des boucles d'irradiation. On a elabore des methodes permettant de les calculer et d'examiner les possibilites offertes par differents emetteurs gamma. Le choix a porte tout d'abord sur les boucles utilisant des alliages liquides d'indium a la temperature ambiante

Conceptualizing a Dynamic Fall Risk Model Including Intrinsic Risks and Exposures.

Science.gov (United States)

Klenk, Jochen; Becker, Clemens; Palumbo, Pierpaolo; Schwickert, Lars; Rapp, Kilan; Helbostad, Jorunn L; Todd, Chris; Lord, Stephen R; Kerse, Ngaire

2017-11-01

Falls are a major cause of injury and disability in older people, leading to serious health and social consequences including fractures, poor quality of life, loss of independence, and institutionalization. To design and provide adequate prevention measures, accurate understanding and identification of person's individual fall risk is important. However, to date, the performance of fall risk models is weak compared with models estimating, for example, cardiovascular risk. This deficiency may result from 2 factors. First, current models consider risk factors to be stable for each person and not change over time, an assumption that does not reflect real-life experience. Second, current models do not consider the interplay of individual exposure including type of activity (eg, walking, undertaking transfers) and environmental risks (eg, lighting, floor conditions) in which activity is performed. Therefore, we posit a dynamic fall risk model consisting of intrinsic risk factors that vary over time and exposure (activity in context). eHealth sensor technology (eg, smartphones) begins to enable the continuous measurement of both the above factors. We illustrate our model with examples of real-world falls from the FARSEEING database. This dynamic framework for fall risk adds important aspects that may improve understanding of fall mechanisms, fall risk models, and the development of fall prevention interventions. Copyright © 2017 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

The Process of Horizontal Differentiation: Two Models.

Science.gov (United States)

Daft, Richard L.; Bradshaw, Patricia J.

1980-01-01

Explores the process of horizontal differentiation by examining events leading to the establishment of 30 new departments in five universities. Two types of horizontal differentiation processes--administrative and academic--were observed and each was associated with different organizational conditions. (Author/IRT)

Computerized Adaptive Testing with R: Recent Updates of the Package catR

Directory of Open Access Journals (Sweden)

David Magis

2017-01-01

Full Text Available The purpose of this paper is to list the recent updates of the R package catR. This package allows for generating response patterns under a computerized adaptive testing (CAT framework with underlying item response theory (IRT models. Among the most important updates, well-known polytomous IRT models are now supported by catR; several item selection rules have been added; and it is now possible to perform post-hoc simulations. Some functions were also rewritten or withdrawn to improve the usefulness and performances of the package.

Improving Measurement Efficiency of the Inner EAR Scale with Item Response Theory.

Science.gov (United States)

Jessen, Annika; Ho, Andrew D; Corrales, C Eduardo; Yueh, Bevan; Shin, Jennifer J

2018-02-01

Objectives (1) To assess the 11-item Inner Effectiveness of Auditory Rehabilitation (Inner EAR) instrument with item response theory (IRT). (2) To determine whether the underlying latent ability could also be accurately represented by a subset of the items for use in high-volume clinical scenarios. (3) To determine whether the Inner EAR instrument correlates with pure tone thresholds and word recognition scores. Design IRT evaluation of prospective cohort data. Setting Tertiary care academic ambulatory otolaryngology clinic. Subjects and Methods Modern psychometric methods, including factor analysis and IRT, were used to assess unidimensionality and item properties. Regression methods were used to assess prediction of word recognition and pure tone audiometry scores. Results The Inner EAR scale is unidimensional, and items varied in their location and information. Information parameter estimates ranged from 1.63 to 4.52, with higher values indicating more useful items. The IRT model provided a basis for identifying 2 sets of items with relatively lower information parameters. Item information functions demonstrated which items added insubstantial value over and above other items and were removed in stages, creating a 8- and 3-item Inner EAR scale for more efficient assessment. The 8-item version accurately reflected the underlying construct. All versions correlated moderately with word recognition scores and pure tone averages. Conclusion The 11-, 8-, and 3-item versions of the Inner EAR scale have strong psychometric properties, and there is correlational validity evidence for the observed scores. Modern psychometric methods can help streamline care delivery by maximizing relevant information per item administered.

A Mixture IRT Analysis of Risky Youth Behavior

Directory of Open Access Journals (Sweden)

Holmes eFinch

2011-05-01

Full Text Available The study reported in this manuscript used a mixture item response model with data from the Youth Risk Behavior Survey 2009 (N = 16,410 to identify subtypes of adolescents at-risk for engaging in unhealthy behaviors, and to find individual survey items that were most effective at identifying such students within each subtype. The goal of the manuscript is twofold: 1 To demonstrate the utility of the mixture item response theory model for identifying subgroups in the population and for highlighting the use of group specific item response parameters and 2 To identify typologies of adolescents based on their propensity for engaging in sexually and substance use risky behaviors. Results indicate that 4 classes of youth exist in the population, with differences in risky sexual behaviors and substance use. The first group had a greater propensity to engage in risky sexual behavior, while group 2 was more likely to smoke tobacco and drink alcohol. Group 3 was the most likely to use other substances, such as marijuana, methamphetamine, and other mind altering drugs, and group 4 had the lowest propensity for engaging in any of the sexual or substance use behaviors included in the survey. Finally, individual items were identified for each group that can be most effective at identifying individuals at greatest risk. Further proposed directions of research and the contribution of this analysis to the existing literature are discussed.

Grand unified models including extra Z bosons

International Nuclear Information System (INIS)

Li Tiezhong

1989-01-01

The grand unified theories (GUT) of the simple Lie groups including extra Z bosons are discussed. Under authors's hypothesis there are only SU 5+m SO 6+4n and E 6 groups. The general discussion of SU 5+m is given, then the SU 6 and SU 7 are considered. In SU 6 the 15+6 * +6 * fermion representations are used, which are not same as others in fermion content, Yukawa coupling and broken scales. A conception of clans of particles, which are not families, is suggested. These clans consist of extra Z bosons and the corresponding fermions of the scale. The all of fermions in the clans are down quarks except for the standard model which consists of Z bosons and 15 fermions, therefore, the spectrum of the hadrons which are composed of these down quarks are different from hadrons at present

Modeling of cylindrical surrounding gate MOSFETs including the fringing field effects

International Nuclear Information System (INIS)

Gupta, Santosh K.; Baishya, Srimanta

2013-01-01

A physically based analytical model for surface potential and threshold voltage including the fringing gate capacitances in cylindrical surround gate (CSG) MOSFETs has been developed. Based on this a subthreshold drain current model has also been derived. This model first computes the charge induced in the drain/source region due to the fringing capacitances and considers an effective charge distribution in the cylindrically extended source/drain region for the development of a simple and compact model. The fringing gate capacitances taken into account are outer fringe capacitance, inner fringe capacitance, overlap capacitance, and sidewall capacitance. The model has been verified with the data extracted from 3D TCAD simulations of CSG MOSFETs and was found to be working satisfactorily. (semiconductor devices)

Calibration of spent fuel measurement assembly

International Nuclear Information System (INIS)

Koleska, Michal; Viererbl, Ladislav; Marek, Milan

2014-01-01

The LVR-15 research reactor (Czech Republic) had been converted from the highly enriched IRT-2M to the low enriched IRT-4M fuel. For the possibility of the independent pre-transport evaluation of IRT-2M burnup, a spectrometric system was developed. This spectrometric system consists of the fuel holder, the collimator and the portable Canberra Big MAC HPGe (High Purity Germanium) detector. In order to have well reproducible and reliable experimental data for modeling of the measurement system, calibration with the 110m Ag isotope with known activity was performed. This isotope was chosen for having energies similar to isotopes measured in fuel assemblies. The 110m Ag isotope was prepared by irradiating of the silver foil in LVR-15 research reactor; its activity was evaluated in the LVR-15's spectrometric laboratory. From the measured data, an efficiency curve of the spectrometric system has been determined. The experimental data were compared to the calculation results with the MCNPX model of the spectrometric system. - Highlights: • Calibration of research reactor spent fuel measurement assembly. • On-site prepared 110m Ag isotope used for the measurement. • Calculated self-shielding factor for the IRT-2M fuel. • Applicable to other research reactor fuel geometries

Evaluation properties of the French version of the OUT-PATSAT35 satisfaction with care questionnaire according to classical and item response theory analyses.

Science.gov (United States)

Panouillères, M; Anota, A; Nguyen, T V; Brédart, A; Bosset, J F; Monnier, A; Mercier, M; Hardouin, J B

2014-09-01

The present study investigates the properties of the French version of the OUT-PATSAT35 questionnaire, which evaluates the outpatients' satisfaction with care in oncology using classical analysis (CTT) and item response theory (IRT). This cross-sectional multicenter study includes 692 patients who completed the questionnaire at the end of their ambulatory treatment. CTT analyses tested the main psychometric properties (convergent and divergent validity, and internal consistency). IRT analyses were conducted separately for each OUT-PATSAT35 domain (the doctors, the nurses or the radiation therapists and the services/organization) by models from the Rasch family. We examined the fit of the data to the model expectations and tested whether the model assumptions of unidimensionality, monotonicity and local independence were respected. A total of 605 (87.4%) respondents were analyzed with a mean age of 64 years (range 29-88). Internal consistency for all scales separately and for the three main domains was good (Cronbach's α 0.74-0.98). IRT analyses were performed with the partial credit model. No disordered thresholds of polytomous items were found. Each domain showed high reliability but fitted poorly to the Rasch models. Three items in particular, the item about "promptness" in the doctors' domain and the items about "accessibility" and "environment" in the services/organization domain, presented the highest default of fit. A correct fit of the Rasch model can be obtained by dropping these items. Most of the local dependence concerned items about "information provided" in each domain. A major deviation of unidimensionality was found in the nurses' domain. CTT showed good psychometric properties of the OUT-PATSAT35. However, the Rasch analysis revealed some misfitting and redundant items. Taking the above problems into consideration, it could be interesting to refine the questionnaire in a future study.

A multidimensional assessment of the validity and utility of alcohol use disorder severity as determined by item response theory models.

Science.gov (United States)

Dawson, Deborah A; Saha, Tulshi D; Grant, Bridget F

2010-02-01

The relative severity of the 11 DSM-IV alcohol use disorder (AUD) criteria are represented by their severity threshold scores, an item response theory (IRT) model parameter inversely proportional to their prevalence. These scores can be used to create a continuous severity measure comprising the total number of criteria endorsed, each weighted by its relative severity. This paper assesses the validity of the severity ranking of the 11 criteria and the overall severity score with respect to known AUD correlates, including alcohol consumption, psychological functioning, family history, antisociality, and early initiation of drinking, in a representative population sample of U.S. past-year drinkers (n=26,946). The unadjusted mean values for all validating measures increased steadily with the severity threshold score, except that legal problems, the criterion with the highest score, was associated with lower values than expected. After adjusting for the total number of criteria endorsed, this direct relationship was no longer evident. The overall severity score was no more highly correlated with the validating measures than a simple count of criteria endorsed, nor did the two measures yield different risk curves. This reflects both within-criterion variation in severity and the fact that the number of criteria endorsed and their severity are so highly correlated that severity is essentially redundant. Attempts to formulate a scalar measure of AUD will do as well by relying on simple counts of criteria or symptom items as by using scales weighted by IRT measures of severity. Published by Elsevier Ireland Ltd.

A roller chain drive model including contact with guide-bars

DEFF Research Database (Denmark)

Pedersen, Sine Leergaard; Hansen, John Michael; Ambrósio, J. A. C.

2004-01-01

A model of a roller chain drive is developed and applied to the simulation and analysis of roller chain drives of large marine diesel engines. The model includes the impact with guide-bars that are the motion delimiter components on the chain strands between the sprockets. The main components...... and the sprocket centre, i.e. a constraint is added when such distance is less than the pitch radius. The unilateral kinematic constraint is removed when its associated constraint reaction force, applied on the roller, is in the direction of the root of the sprocket teeth. In order to improve the numerical...

A constitutive model for the forces of a magnetic bearing including eddy currents

Science.gov (United States)

Taylor, D. L.; Hebbale, K. V.

1993-01-01

A multiple magnet bearing can be developed from N individual electromagnets. The constitutive relationships for a single magnet in such a bearing is presented. Analytical expressions are developed for a magnet with poles arranged circumferencially. Maxwell's field equations are used so the model easily includes the effects of induced eddy currents due to the rotation of the journal. Eddy currents must be included in any dynamic model because they are the only speed dependent parameter and may lead to a critical speed for the bearing. The model is applicable to bearings using attraction or repulsion.

Including policy and management in socio-hydrology models: initial conceptualizations

Science.gov (United States)

Hermans, Leon; Korbee, Dorien

2017-04-01

Socio-hydrology studies the interactions in coupled human-water systems. So far, the use of dynamic models that capture the direct feedback between societal and hydrological systems has been dominant. What has not yet been included with any particular emphasis, is the policy or management layer, which is a central element in for instance integrated water resources management (IWRM) or adaptive delta management (ADM). Studying the direct interactions between human-water systems generates knowledges that eventually helps influence these interactions in ways that may ensure better outcomes - for society and for the health and sustainability of water systems. This influence sometimes occurs through spontaneous emergence, uncoordinated by societal agents - private sector, citizens, consumers, water users. However, the term 'management' in IWRM and ADM also implies an additional coordinated attempt through various public actors. This contribution is a call to include the policy and management dimension more prominently into the research focus of the socio-hydrology field, and offers first conceptual variables that should be considered in attempts to include this policy or management layer in socio-hydrology models. This is done by drawing on existing frameworks to study policy processes throughout both planning and implementation phases. These include frameworks such as the advocacy coalition framework, collective learning and policy arrangements, which all emphasis longer-term dynamics and feedbacks between actor coalitions in strategic planning and implementation processes. A case about longter-term dynamics in the management of the Haringvliet in the Netherlands is used to illustrate the paper.

A hydrodynamic model for granular material flows including segregation effects

Science.gov (United States)

Gilberg, Dominik; Klar, Axel; Steiner, Konrad

2017-06-01

The simulation of granular flows including segregation effects in large industrial processes using particle methods is accurate, but very time-consuming. To overcome the long computation times a macroscopic model is a natural choice. Therefore, we couple a mixture theory based segregation model to a hydrodynamic model of Navier-Stokes-type, describing the flow behavior of the granular material. The granular flow model is a hybrid model derived from kinetic theory and a soil mechanical approach to cover the regime of fast dilute flow, as well as slow dense flow, where the density of the granular material is close to the maximum packing density. Originally, the segregation model has been formulated by Thornton and Gray for idealized avalanches. It is modified and adapted to be in the preferred form for the coupling. In the final coupled model the segregation process depends on the local state of the granular system. On the other hand, the granular system changes as differently mixed regions of the granular material differ i.e. in the packing density. For the modeling process the focus lies on dry granular material flows of two particle types differing only in size but can be easily extended to arbitrary granular mixtures of different particle size and density. To solve the coupled system a finite volume approach is used. To test the model the rotational mixing of small and large particles in a tumbler is simulated.

Mathematical Model of Thyristor Inverter Including a Series-parallel Resonant Circuit

OpenAIRE

Miroslaw Luft; Elzbieta Szychta

2008-01-01

The article presents a mathematical model of thyristor inverter including a series-parallel resonant circuit with theaid of state variable method. Maple procedures are used to compute current and voltage waveforms in the inverter.

Mathematical model of thyristor inverter including a series-parallel resonant circuit

OpenAIRE

Luft, M.; Szychta, E.

2008-01-01

The article presents a mathematical model of thyristor inverter including a series-parallel resonant circuit with the aid of state variable method. Maple procedures are used to compute current and voltage waveforms in the inverter.

Accurate SHAPE-directed RNA secondary structure modeling, including pseudoknots.

Science.gov (United States)

Hajdin, Christine E; Bellaousov, Stanislav; Huggins, Wayne; Leonard, Christopher W; Mathews, David H; Weeks, Kevin M

2013-04-02

A pseudoknot forms in an RNA when nucleotides in a loop pair with a region outside the helices that close the loop. Pseudoknots occur relatively rarely in RNA but are highly overrepresented in functionally critical motifs in large catalytic RNAs, in riboswitches, and in regulatory elements of viruses. Pseudoknots are usually excluded from RNA structure prediction algorithms. When included, these pairings are difficult to model accurately, especially in large RNAs, because allowing this structure dramatically increases the number of possible incorrect folds and because it is difficult to search the fold space for an optimal structure. We have developed a concise secondary structure modeling approach that combines SHAPE (selective 2'-hydroxyl acylation analyzed by primer extension) experimental chemical probing information and a simple, but robust, energy model for the entropic cost of single pseudoknot formation. Structures are predicted with iterative refinement, using a dynamic programming algorithm. This melded experimental and thermodynamic energy function predicted the secondary structures and the pseudoknots for a set of 21 challenging RNAs of known structure ranging in size from 34 to 530 nt. On average, 93% of known base pairs were predicted, and all pseudoknots in well-folded RNAs were identified.

Progress Towards an LES Wall Model Including Unresolved Roughness

Science.gov (United States)

Craft, Kyle; Redman, Andrew; Aikens, Kurt

2015-11-01

Wall models used in large eddy simulations (LES) are often based on theories for hydraulically smooth walls. While this is reasonable for many applications, there are also many where the impact of surface roughness is important. A previously developed wall model has been used primarily for jet engine aeroacoustics. However, jet simulations have not accurately captured thick initial shear layers found in some experimental data. This may partly be due to nozzle wall roughness used in the experiments to promote turbulent boundary layers. As a result, the wall model is extended to include the effects of unresolved wall roughness through appropriate alterations to the log-law. The methodology is tested for incompressible flat plate boundary layers with different surface roughness. Correct trends are noted for the impact of surface roughness on the velocity profile. However, velocity deficit profiles and the Reynolds stresses do not collapse as well as expected. Possible reasons for the discrepancies as well as future work will be presented. This work used the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by National Science Foundation grant number ACI-1053575. Computational resources on TACC Stampede were provided under XSEDE allocation ENG150001.

Kinetic models of gene expression including non-coding RNAs

Energy Technology Data Exchange (ETDEWEB)

Zhdanov, Vladimir P., E-mail: zhdanov@catalysis.r

2011-03-15

In cells, genes are transcribed into mRNAs, and the latter are translated into proteins. Due to the feedbacks between these processes, the kinetics of gene expression may be complex even in the simplest genetic networks. The corresponding models have already been reviewed in the literature. A new avenue in this field is related to the recognition that the conventional scenario of gene expression is fully applicable only to prokaryotes whose genomes consist of tightly packed protein-coding sequences. In eukaryotic cells, in contrast, such sequences are relatively rare, and the rest of the genome includes numerous transcript units representing non-coding RNAs (ncRNAs). During the past decade, it has become clear that such RNAs play a crucial role in gene expression and accordingly influence a multitude of cellular processes both in the normal state and during diseases. The numerous biological functions of ncRNAs are based primarily on their abilities to silence genes via pairing with a target mRNA and subsequently preventing its translation or facilitating degradation of the mRNA-ncRNA complex. Many other abilities of ncRNAs have been discovered as well. Our review is focused on the available kinetic models describing the mRNA, ncRNA and protein interplay. In particular, we systematically present the simplest models without kinetic feedbacks, models containing feedbacks and predicting bistability and oscillations in simple genetic networks, and models describing the effect of ncRNAs on complex genetic networks. Mathematically, the presentation is based primarily on temporal mean-field kinetic equations. The stochastic and spatio-temporal effects are also briefly discussed.

Mathematical Model of Thyristor Inverter Including a Series-parallel Resonant Circuit

Directory of Open Access Journals (Sweden)

Miroslaw Luft

2008-01-01

Full Text Available The article presents a mathematical model of thyristor inverter including a series-parallel resonant circuit with theaid of state variable method. Maple procedures are used to compute current and voltage waveforms in the inverter.

In-reach specialist nursing teams for residential care homes: uptake of services, impact on care provision and cost-effectiveness

Directory of Open Access Journals (Sweden)

Nelson Sara

2008-12-01

Full Text Available Abstract Background A joint NHS-Local Authority initiative in England designed to provide a dedicated nursing and physiotherapy in-reach team (IRT to four residential care homes has been evaluated. The IRT supported 131 residents and maintained 15 'virtual' beds for specialist nursing in these care homes. Methods Data captured prospectively (July 2005 to June 2007 included: numbers of referrals; reason for referral; outcome (e.g. admission to IRT bed, short-term IRT support; length of stay in IRT; prevented hospital admissions; early hospital discharges; avoided nursing home transfers; and detection of unrecognised illnesses. An economic analysis was undertaken. Results 733 referrals were made during the 2 years (range 0.5 to 13.0 per resident per annum resulting in a total of 6,528 visits. Two thirds of referrals aimed at maintaining the resident's independence in the care home. According to expert panel assessment, 197 hospital admissions were averted over the period; 20 early discharges facilitated; and 28 resident transfers to a nursing home prevented. Detection of previously unrecognised illnesses accounted for a high number of visits. Investment in IRT equalled £44.38 per resident per week. Savings through reduced hospital admissions, early discharges, delayed transfers to nursing homes, and identification of previously unrecognised illnesses are conservatively estimated to produce a final reduction in care cost of £6.33 per resident per week. A sensitivity analysis indicates this figure might range from a weekly overall saving of £36.90 per resident to a 'worst case' estimate of £2.70 extra expenditure per resident per week. Evaluation early in implementation may underestimate some cost-saving activities and greater savings may emerge over a longer time period. Similarly, IRT costs may reduce over time due to the potential for refinement of team without major loss in effectiveness. Conclusion Introduction of a specialist nursing in

Alzheimer's Disease Assessment: A Review and Illustrations Focusing on Item Response Theory Techniques.

Science.gov (United States)

Balsis, Steve; Choudhury, Tabina K; Geraci, Lisa; Benge, Jared F; Patrick, Christopher J

2018-04-01

Alzheimer's disease (AD) affects neurological, cognitive, and behavioral processes. Thus, to accurately assess this disease, researchers and clinicians need to combine and incorporate data across these domains. This presents not only distinct methodological and statistical challenges but also unique opportunities for the development and advancement of psychometric techniques. In this article, we describe relatively recent research using item response theory (IRT) that has been used to make progress in assessing the disease across its various symptomatic and pathological manifestations. We focus on applications of IRT to improve scoring, test development (including cross-validation and adaptation), and linking and calibration. We conclude by describing potential future multidimensional applications of IRT techniques that may improve the precision with which AD is measured.

Icing Simulation Research Supporting the Ice-Accretion Testing of Large-Scale Swept-Wing Models

Science.gov (United States)

Yadlin, Yoram; Monnig, Jaime T.; Malone, Adam M.; Paul, Bernard P.

2018-01-01

The work summarized in this report is a continuation of NASA's Large-Scale, Swept-Wing Test Articles Fabrication; Research and Test Support for NASA IRT contract (NNC10BA05 -NNC14TA36T) performed by Boeing under the NASA Research and Technology for Aerospace Propulsion Systems (RTAPS) contract. In the study conducted under RTAPS, a series of icing tests in the Icing Research Tunnel (IRT) have been conducted to characterize ice formations on large-scale swept wings representative of modern commercial transport airplanes. The outcome of that campaign was a large database of ice-accretion geometries that can be used for subsequent aerodynamic evaluation in other experimental facilities and for validation of ice-accretion prediction codes.

Including sugar cane in the agro-ecosystem model ORCHIDEE-STICS

Science.gov (United States)

Valade, A.; Vuichard, N.; Ciais, P.; Viovy, N.

2010-12-01

With 4 million ha currently grown for ethanol in Brazil only, approximately half the global bioethanol production in 2005 (Smeets 2008), and a devoted land area expected to expand globally in the years to come, sugar cane is at the heart of the biofuel debate. Indeed, ethanol made from biomass is currently the most widespread option for alternative transportation fuels. It was originally promoted as a carbon neutral energy resource that could bring energy independence to countries and local opportunities to farmers, until attention was drawn to its environmental and socio-economical drawbacks. It is still not clear to which extent it is a solution or a contributor to climate change mitigation. Dynamic Global Vegetation models can help address these issues and quantify the potential impacts of biofuels on ecosystems at scales ranging from on-site to global. The global agro-ecosystem model ORCHIDEE describes water, carbon and energy exchanges at the soil-atmosphere interface for a limited number of natural and agricultural vegetation types. In order to integrate agricultural management to the simulations and to capture more accurately the specificity of crops' phenology, ORCHIDEE has been coupled with the agronomical model STICS. The resulting crop-oriented vegetation model ORCHIDEE-STICS has been used so far to simulate temperate crops such as wheat, corn and soybean. As a generic ecosystem model, each grid cell can include several vegetation types with their own phenology and management practices, making it suitable to spatial simulations. Here, ORCHIDEE-STICS is altered to include sugar cane as a new agricultural Plant functional Type, implemented and parametrized using the STICS approach. An on-site calibration and validation is then performed based on biomass and flux chamber measurements in several sites in Australia and variables such as LAI, dry weight, heat fluxes and respiration are used to evaluate the ability of the model to simulate the specific

Mechanistic insights into a novel exporter-importer system of Mycobacterium tuberculosis unravel its role in trafficking of iron.

Directory of Open Access Journals (Sweden)

Aisha Farhana

2008-05-01

Full Text Available Elucidation of the basic mechanistic and biochemical principles underlying siderophore mediated iron uptake in mycobacteria is crucial for targeting this principal survival strategy vis-à-vis virulence determinants of the pathogen. Although, an understanding of siderophore biosynthesis is known, the mechanism of their secretion and uptake still remains elusive.Here, we demonstrate an interplay among three iron regulated Mycobacterium tuberculosis (M.tb proteins, namely, Rv1348 (IrtA, Rv1349 (IrtB and Rv2895c in export and import of M.tb siderophores across the membrane and the consequent iron uptake. IrtA, interestingly, has a fused N-terminal substrate binding domain (SBD, representing an atypical subset of ABC transporters, unlike IrtB that harbors only the permease and ATPase domain. SBD selectively binds to non-ferrated siderophores whereas Rv2895c exhibits relatively higher affinity towards ferrated siderophores. An interaction between the permease domain of IrtB and Rv2895c is evident from GST pull-down assay. In vitro liposome reconstitution experiments further demonstrate that IrtA is indeed a siderophore exporter and the two-component IrtB-Rv2895c system is an importer of ferrated siderophores. Knockout of msmeg_6554, the irtA homologue in Mycobacterium smegmatis, resulted in an impaired M.tb siderophore export that is restored upon complementation with M.tb irtA.Our data suggest the interplay of three proteins, namely IrtA, IrtB and Rv2895c in synergizing the balance of siderophores and thus iron inside the mycobacterial cell.

Clarifying the use of aggregated exposures in multilevel models: self-included vs. self-excluded measures.

Directory of Open Access Journals (Sweden)

Etsuji Suzuki

Full Text Available Multilevel analyses are ideally suited to assess the effects of ecological (higher level and individual (lower level exposure variables simultaneously. In applying such analyses to measures of ecologies in epidemiological studies, individual variables are usually aggregated into the higher level unit. Typically, the aggregated measure includes responses of every individual belonging to that group (i.e. it constitutes a self-included measure. More recently, researchers have developed an aggregate measure which excludes the response of the individual to whom the aggregate measure is linked (i.e. a self-excluded measure. In this study, we clarify the substantive and technical properties of these two measures when they are used as exposures in multilevel models.Although the differences between the two aggregated measures are mathematically subtle, distinguishing between them is important in terms of the specific scientific questions to be addressed. We then show how these measures can be used in two distinct types of multilevel models-self-included model and self-excluded model-and interpret the parameters in each model by imposing hypothetical interventions. The concept is tested on empirical data of workplace social capital and employees' systolic blood pressure.Researchers assume group-level interventions when using a self-included model, and individual-level interventions when using a self-excluded model. Analytical re-parameterizations of these two models highlight their differences in parameter interpretation. Cluster-mean centered self-included models enable researchers to decompose the collective effect into its within- and between-group components. The benefit of cluster-mean centering procedure is further discussed in terms of hypothetical interventions.When investigating the potential roles of aggregated variables, researchers should carefully explore which type of model-self-included or self-excluded-is suitable for a given situation

Simple suggestions for including vertical physics in oil spill models

International Nuclear Information System (INIS)

D'Asaro, Eric; University of Washington, Seatle, WA

2001-01-01

Current models of oil spills include no vertical physics. They neglect the effect of vertical water motions on the transport and concentration of floating oil. Some simple ways to introduce vertical physics are suggested here. The major suggestion is to routinely measure the density stratification of the upper ocean during oil spills in order to develop a database on the effect of stratification. (Author)

A Model for Employee Motivation and Satisfaction.

Science.gov (United States)

Grant, Philip C.

1979-01-01

To increase an employee's motivation, an employee must perceive that s/he will achieve higher satisfaction for greater effort. To generate such perception, rewards must clearly be contingent on effort and the cost of increased effort must grow at a slower rate than the increase in reward. (Author/IRT)

Overview of classical test theory and item response theory for the quantitative assessment of items in developing patient-reported outcomes measures.

Science.gov (United States)

Cappelleri, Joseph C; Jason Lundy, J; Hays, Ron D

2014-05-01

The US Food and Drug Administration's guidance for industry document on patient-reported outcomes (PRO) defines content validity as "the extent to which the instrument measures the concept of interest" (FDA, 2009, p. 12). According to Strauss and Smith (2009), construct validity "is now generally viewed as a unifying form of validity for psychological measurements, subsuming both content and criterion validity" (p. 7). Hence, both qualitative and quantitative information are essential in evaluating the validity of measures. We review classical test theory and item response theory (IRT) approaches to evaluating PRO measures, including frequency of responses to each category of the items in a multi-item scale, the distribution of scale scores, floor and ceiling effects, the relationship between item response options and the total score, and the extent to which hypothesized "difficulty" (severity) order of items is represented by observed responses. If a researcher has few qualitative data and wants to get preliminary information about the content validity of the instrument, then descriptive assessments using classical test theory should be the first step. As the sample size grows during subsequent stages of instrument development, confidence in the numerical estimates from Rasch and other IRT models (as well as those of classical test theory) would also grow. Classical test theory and IRT can be useful in providing a quantitative assessment of items and scales during the content-validity phase of PRO-measure development. Depending on the particular type of measure and the specific circumstances, the classical test theory and/or the IRT should be considered to help maximize the content validity of PRO measures. Copyright © 2014 Elsevier HS Journals, Inc. All rights reserved.

A new Integrated Negative Symptom structure of the Positive and Negative Syndrome Scale (PANSS) in schizophrenia using item response analysis.

Science.gov (United States)

Khan, Anzalee; Lindenmayer, Jean-Pierre; Opler, Mark; Yavorsky, Christian; Rothman, Brian; Lucic, Luka

2013-10-01

Debate persists with regard to how best to categorize the syndromal dimension of negative symptoms in schizophrenia. The aim was to first review published Principle Components Analysis (PCA) of the PANSS, and extract items most frequently included in the negative domain, and secondly, to examine the quality of items using Item Response Theory (IRT) to select items that best represent a measurable dimension (or dimensions) of negative symptoms. First, 22 factor analyses and PCA met were included. Second, using a large dataset (n=7187) of participants in clinical trials with chronic schizophrenia, we extracted items loading on one or more PCA. Third, items not loading with a value of ≥ 0.5, or loading on more than one component with values of ≥ 0.5 were discarded. Fourth, resulting items were included in a non-parametric IRT and retained based on Option Characteristic Curves (OCCs) and Item Characteristic Curves (ICCs). 15 items loaded on a negative domain in at least one study, with Emotional Withdrawal loading on all studies. Non-parametric IRT retained nine items as an Integrated Negative Factor: Emotional Withdrawal, Blunted Affect, Passive/Apathetic Social Withdrawal, Poor Rapport, Lack of Spontaneity/Conversation Flow, Active Social Avoidance, Disturbance of Volition, Stereotyped Thinking and Difficulty in Abstract Thinking. This is the first study to use a psychometric IRT process to arrive at a set of negative symptom items. Future steps will include further examination of these nine items in terms of their stability, sensitivity to change, and correlations with functional and cognitive outcomes. © 2013 Elsevier B.V. All rights reserved.

Hydromechanical modeling of clay rock including fracture damage

Science.gov (United States)

Asahina, D.; Houseworth, J. E.; Birkholzer, J. T.

2012-12-01

Argillaceous rock typically acts as a flow barrier, but under certain conditions significant and potentially conductive fractures may be present. Fracture formation is well-known to occur in the vicinity of underground excavations in a region known as the excavation disturbed zone. Such problems are of particular importance for low-permeability, mechanically weak rock such as clays and shales because fractures can be relatively transient as a result of fracture self-sealing processes. Perhaps not as well appreciated is the fact that natural fractures can form in argillaceous rock as a result of hydraulic overpressure caused by phenomena such as disequlibrium compaction, changes in tectonic stress, and mineral dehydration. Overpressure conditions can cause hydraulic fracturing if the fluid pressure leads to tensile effective stresses that exceed the tensile strength of the material. Quantitative modeling of this type of process requires coupling between hydrogeologic processes and geomechanical processes including fracture initiation and propagation. Here we present a computational method for three-dimensional, hydromechanical coupled processes including fracture damage. Fractures are represented as discrete features in a fracture network that interact with a porous rock matrix. Fracture configurations are mapped onto an unstructured, three-dimensonal, Voronoi grid, which is based on a random set of spatial points. Discrete fracture networks (DFN) are represented by the connections of the edges of a Voronoi cells. This methodology has the advantage that fractures can be more easily introduced in response to coupled hydro-mechanical processes and generally eliminates several potential issues associated with the geometry of DFN and numerical gridding. A geomechanical and fracture-damage model is developed here using the Rigid-Body-Spring-Network (RBSN) numerical method. The hydrogelogic and geomechanical models share the same geometrical information from a 3D Voronoi

Direct-phase-variable model of a synchronous reluctance motor including all slot and winding harmonics

International Nuclear Information System (INIS)

Obe, Emeka S.; Binder, A.

2011-01-01

A detailed model in direct-phase variables of a synchronous reluctance motor operating at mains voltage and frequency is presented. The model includes the stator and rotor slot openings, the actual winding layout and the reluctance rotor geometry. Hence, all mmf and permeance harmonics are taken into account. It is seen that non-negligible harmonics introduced by slots are present in the inductances computed by the winding function procedure. These harmonics are usually ignored in d-q models. The machine performance is simulated in the stator reference frame to depict the difference between this new direct-phase model including all harmonics and the conventional rotor reference frame d-q model. Saturation is included by using a polynomial fitting the variation of d-axis inductance with stator current obtained by finite-element software FEMAG DC (registered) . The detailed phase-variable model can yield torque pulsations comparable to those obtained from finite elements while the d-q model cannot.

Karma Testlerin Eşitlenmesinde MTK Eşitleme Yöntemlerinin Eşitlik Özelliği Korunumu Ölçütüne Göre Karşılaştırılması

Directory of Open Access Journals (Sweden)

Neşe ÖZTÜRK GÜBEŞ

2015-06-01

Full Text Available In this study, Item Response Theory (IRT true-score equating and observed-score equating methods were compared based on preserving test equity property. The data used in this study were 8th grade mathematics test item responses which obtained from booklet 5 and 6 of Trends in International Mathematics and Science Study (TIMSS 2011 Turkey sample. Results showed that while IRT true-score equating outperformed IRT observed-score equating in terms preserving first-order equity, however IRT observed-score equating method IRT true- score equating in terms of second order equity property

Modeling motive activation in the Operant Motives Test

DEFF Research Database (Denmark)

Runge, J. Malte; Lang, Jonas W. B.; Engeser, Stefan

2016-01-01

The Operant Motive Test (OMT) is a picture-based procedure that asks respondents to generate imaginative verbal behavior that is later coded for the presence of affiliation, power, and achievement-related motive content by trained coders. The OMT uses a larger number of pictures and asks...... on the dynamic model were .52, .62, and .73 for the affiliation, achievement, and power motive in the OMT, respectively. The second contribution of this article is a tutorial and R code that allows researchers to directly apply the dynamic Thurstonian IRT model to their data. The future use of the OMT...... respondents to provide more brief answers than earlier and more traditional picture-based implicit motive measures and has therefore become a frequently used measurement instrument in both research and practice. This article focuses on the psychometric response mechanism in the OMT and builds on recent...

Mathematical learning instruction and teacher motivation factors affecting science technology engineering and math (STEM) major choices in 4-year colleges and universities: Multilevel structural equation modeling

Science.gov (United States)

Lee, Ahlam

2011-12-01

Using the Educational Longitudinal Study of 2002/06, this study examined the effects of the selected mathematical learning and teacher motivation factors on graduates' science, technology, engineering, and math (STEM) related major choices in 4-year colleges and universities, as mediated by math performance and math self-efficacy. Using multilevel structural equation modeling, I analyzed: (1) the association between mathematical learning instruction factors (i.e., computer, individual, and lecture-based learning activities in mathematics) and students' STEM major choices in 4-year colleges and universities as mediated by math performance and math self-efficacy and (2) the association between school factor, teacher motivation and students' STEM major choices in 4-year colleges and universities via mediators of math performance and math self-efficacy. The results revealed that among the selected learning experience factors, computer-based learning activities in math classrooms yielded the most positive effects on math self-efficacy, which significantly predicted the increase in the proportion of students' STEM major choice as mediated by math self-efficacy. Further, when controlling for base-year math Item Response Theory (IRT) scores, a positive relationship between individual-based learning activities in math classrooms and the first follow-up math IRT scores emerged, which related to the high proportion of students' STEM major choices. The results also indicated that individual and lecture-based learning activities in math yielded positive effects on math self-efficacy, which related to STEM major choice. Concerning between-school levels, teacher motivation yielded positive effects on the first follow up math IRT score, when controlling for base year IRT score. The results from this study inform educators, parents, and policy makers on how mathematics instruction can improve student math performance and encourage more students to prepare for STEM careers. Students

Differences in symptom expression between unipolar and bipolar spectrum depression: Results from a nationally representative sample using item response theory (IRT).

Science.gov (United States)

Hoertel, Nicolas; Blanco, Carlos; Peyre, Hugo; Wall, Melanie M; McMahon, Kibby; Gorwood, Philip; Lemogne, Cédric; Limosin, Frédéric

2016-11-01

The inclusion of subsyndromal forms of bipolarity in the fifth edition of the DSM has major implications for the way in which we approach the diagnosis of individuals with depressive symptoms. The aim of the present study was to use methods based on item response theory (IRT) to examine whether, when equating for levels of depression severity, there are differences in the likelihood of reporting DSM-IV symptoms of major depressive episode (MDE) between subjects with and without a lifetime history of manic symptoms. We conducted these analyses using a large, nationally representative sample from the USA (n=34,653), the second wave of the National Epidemiologic Survey on Alcohol and Related Conditions. The items sadness, appetite disturbance and psychomotor symptoms were better indicators of depression severity in participants without a lifetime history of manic symptoms, in a clinically meaningful way. DSM-IV symptoms of MDE were substantially less informative in participants with a lifetime history of manic symptoms than in those without such history. Clinical information on DSM-IV depressive and manic symptoms was based on retrospective self-report The clinical presentation of depressive symptoms may substantially differ in individuals with and without a lifetime history of manic symptoms. These findings alert to the possibility of atypical symptomatic presentations among individuals with co-occurring symptoms or disorders and highlight the importance of continued research into specific pathophysiology differentiating unipolar and bipolar depression. Copyright © 2016 Elsevier B.V. All rights reserved.

Power analysis on the time effect for the longitudinal Rasch model.

Science.gov (United States)

Feddag, M L; Blanchin, M; Hardouin, J B; Sebille, V

2014-01-01

Statistics literature in the social, behavioral, and biomedical sciences typically stress the importance of power analysis. Patient Reported Outcomes (PRO) such as quality of life and other perceived health measures (pain, fatigue, stress,...) are increasingly used as important health outcomes in clinical trials or in epidemiological studies. They cannot be directly observed nor measured as other clinical or biological data and they are often collected through questionnaires with binary or polytomous items. The Rasch model is the well known model in the item response theory (IRT) for binary data. The article proposes an approach to evaluate the statistical power of the time effect for the longitudinal Rasch model with two time points. The performance of this method is compared to the one obtained by simulation study. Finally, the proposed approach is illustrated on one subscale of the SF-36 questionnaire.

Integrated model of port oil piping transportation system safety including operating environment threats

Directory of Open Access Journals (Sweden)

Kołowrocki Krzysztof

2017-06-01

Full Text Available The paper presents an integrated general model of complex technical system, linking its multistate safety model and the model of its operation process including operating environment threats and considering variable at different operation states its safety structures and its components safety parameters. Under the assumption that the system has exponential safety function, the safety characteristics of the port oil piping transportation system are determined.

Integrated model of port oil piping transportation system safety including operating environment threats

OpenAIRE

Kołowrocki, Krzysztof; Kuligowska, Ewa; Soszyńska-Budny, Joanna

2017-01-01

The paper presents an integrated general model of complex technical system, linking its multistate safety model and the model of its operation process including operating environment threats and considering variable at different operation states its safety structures and its components safety parameters. Under the assumption that the system has exponential safety function, the safety characteristics of the port oil piping transportation system are determined.

An Aggregate IRT Procedure for Exploratory Factor Analysis

NARCIS (Netherlands)

Camilli, Gregory; Fox, Gerardus J.A.

2015-01-01

An aggregation strategy is proposed to potentially address practical limitation related to computing resources for two-level multidimensional item response theory (MIRT) models with large data sets. The aggregate model is derived by integration of the normal ogive model, and an adaptation of the

Effects of Instability Versus Traditional Resistance Training on Strength, Power and Velocity in Untrained Men

Directory of Open Access Journals (Sweden)

José Luis Maté-Muñoz

2014-09-01

Full Text Available The purpose of this study was compare the effects of a traditional and an instability resistance circuit training program on upper and lower limb strength, power, movement velocity and jumping ability. Thirty-six healthy untrained men were assigned to two experimental groups and a control group. Subjects in the experimental groups performed a resistance circuit training program consisting of traditional exercises (TRT, n = 10 or exercises executed in conditions of instability (using BOSU® and TRX® (IRT, n = 12. Both programs involved three days per week of training for a total of seven weeks. The following variables were determined before and after training: maximal strength (1RM, average (AV and peak velocity (PV, average (AP and peak power (PP, all during bench press (BP and back squat (BS exercises, along with squat jump (SJ height and counter movement jump (CMJ height. All variables were found to significantly improve (p <0.05 in response to both training programs. Major improvements were observed in SJ height (IRT = 22.1%, TRT = 20.1%, CMJ height (IRT = 17.7%, TRT = 15.2%, 1RM in BS (IRT = 13.03%, TRT = 12.6%, 1RM in BP (IRT = 4.7%, TRT = 4.4%, AP in BS (IRT = 10.5%, TRT = 9.3%, AP in BP (IRT = 2.4%, TRT = 8.1%, PP in BS (IRT=19.42%, TRT = 22.3%, PP in BP (IRT = 7.6%, TRT = 11.5%, AV in BS (IRT = 10.5%, TRT = 9.4%, and PV in BS (IRT = 8.6%, TRT = 4.5%. Despite such improvements no significant differences were detected in the posttraining variables recorded for the two experimental groups. These data indicate that a circuit training program using two instability training devices is as effective in untrained men as a program executed under stable conditions for improving strength (1RM, power, movement velocity and jumping ability.

Enhanced UWB Radio Channel Model for Short-Range Communication Scenarios Including User Dynamics

DEFF Research Database (Denmark)

Kovacs, Istvan Zsolt; Nguyen, Tuan Hung; Eggers, Patrick Claus F.

2005-01-01

channel model represents an enhancement of the existing IEEE 802.15.3a/4a PAN channel model, where antenna and user-proximity effects are not included. Our investigations showed that significant variations of the received wideband power and time-delay signal clustering are possible due the human body...

Aggregated Demand Modelling Including Distributed Generation, Storage and Demand Response

OpenAIRE

Marzooghi, Hesamoddin; Hill, David J.; Verbic, Gregor

2014-01-01

It is anticipated that penetration of renewable energy sources (RESs) in power systems will increase further in the next decades mainly due to environmental issues. In the long term of several decades, which we refer to in terms of the future grid (FG), balancing between supply and demand will become dependent on demand actions including demand response (DR) and energy storage. So far, FG feasibility studies have not considered these new demand-side developments for modelling future demand. I...

Analysis of Rater Agreement by Rasch and IRT Models

DEFF Research Database (Denmark)

Petersen, Jørgen Holm

2013-01-01

by obstetricians to asses the status of a fetus. Meta analyses of the randomized clinical trials have shown a 49% reduction in perinatal mortality on using the technique on high-risk pregnancies. It is clear from these considerations that the variations in effects of using the ultrasound technique may in part...

An Aggregate IRT Procedure for Exploratory Factor Analysis

Science.gov (United States)

Camilli, Gregory; Fox, Jean-Paul

2015-01-01

An aggregation strategy is proposed to potentially address practical limitation related to computing resources for two-level multidimensional item response theory (MIRT) models with large data sets. The aggregate model is derived by integration of the normal ogive model, and an adaptation of the stochastic approximation expectation maximization…

Extending item response theory to online homework

Directory of Open Access Journals (Sweden)

Gerd Kortemeyer

2014-05-01

Full Text Available Item response theory (IRT becomes an increasingly important tool when analyzing “big data” gathered from online educational venues. However, the mechanism was originally developed in traditional exam settings, and several of its assumptions are infringed upon when deployed in the online realm. For a large-enrollment physics course for scientists and engineers, the study compares outcomes from IRT analyses of exam and homework data, and then proceeds to investigate the effects of each confounding factor introduced in the online realm. It is found that IRT yields the correct trends for learner ability and meaningful item parameters, yet overall agreement with exam data is moderate. It is also found that learner ability and item discrimination is robust over a wide range with respect to model assumptions and introduced noise. Item difficulty is also robust, but over a narrower range.

Comparison of the parameters of the IR-8 reactor with different fuel assembly designs with LEU fuel

International Nuclear Information System (INIS)

Vatulin, A.; Stetsky, Y.; Dobrikova, I.

1999-01-01

The estimation of neutron-physical, heat and hydraulic parameters of the IR-8 research reactor with low enriched uranium (LEU) fuel was performed. Two fuel assembly (FA) designs were reviewed: IRT-4M with the tubular type fuel elements and IRT-MR with the rod type fuel elements. UO 2 -Al dispersion 19.75% enrichment fuel is used in both cases. The results of the calculations were compared with main parameters of the reactor, using the current IRT-3M FA with 90% high enriched uranium (HEU) fuel. The results of these comparisons showed that during the LEU conversion of the reactor the cycle length, excess reactivity and peak power of the IRT-MR type FA are higher than for the IRT-3M type FA and IRT-4M type FA. (author)

S5-4: Formal Modeling of Affordance in Human-Included Systems

Directory of Open Access Journals (Sweden)

Namhun Kim

2012-10-01

Full Text Available In spite of it being necessary for humans to consider modeling, analysis, and control of human-included systems, it has been considered a challenging problem because of the critical role of humans in complex systems and of humans' capability of executing unanticipated actions–both beneficial and detrimental ones. Thus, to provide systematic approaches to modeling human actions as a part of system behaviors, a formal modeling framework for human-involved systems in which humans play a controlling role based on their perceptual information is presented. The theory of affordance provides definitions of human actions and their associated properties; Finite State Automata (FSA based modeling is capable of mapping nondeterministic humans into computable components in the system representation. In this talk, we investigate the role of perception in human actions in the system operation and examine the representation of perceptual elements in affordance-based modeling formalism. The proposed framework is expected to capture the natural ways in which humans participate in the system as part of its operation. A human-machine cooperative manufacturing system control example and a human agent simulation example will be introduced for the illustrative purposes at the end of the presentation.

Item response theory analysis of the Lichtenberg Financial Decision Screening Scale.

Science.gov (United States)

Teresi, Jeanne A; Ocepek-Welikson, Katja; Lichtenberg, Peter A

2017-01-01

The focus of these analyses was to examine the psychometric properties of the Lichtenberg Financial Decision Screening Scale (LFDSS). The purpose of the screen was to evaluate the decisional abilities and vulnerability to exploitation of older adults. Adults aged 60 and over were interviewed by social, legal, financial, or health services professionals who underwent in-person training on the administration and scoring of the scale. Professionals provided a rating of the decision-making abilities of the older adult. The analytic sample included 213 individuals with an average age of 76.9 (SD = 10.1). The majority (57%) were female. Data were analyzed using item response theory (IRT) methodology. The results supported the unidimensionality of the item set. Several IRT models were tested. Ten ordinal and binary items evidenced a slightly higher reliability estimate (0.85) than other versions and better coverage in terms of the range of reliable measurement across the continuum of financial incapacity.

Modeling of the Direct Current Generator Including the Magnetic Saturation and Temperature Effects

Directory of Open Access Journals (Sweden)

Alfonso J. Mercado-Samur

2013-11-01

Full Text Available In this paper the inclusion of temperature effect on the field resistance on the direct current generator model DC1A, which is valid to stability studies is proposed. First, the linear generator model is presented, after the effect of magnetic saturation and the change in the resistance value due to temperature produced by the field current are included. The comparison of experimental results and model simulations to validate the model is used. A direct current generator model which is a better representation of the generator is obtained. Visual comparison between simulations and experimental results shows the success of the proposed model, because it presents the lowest error of the compared models. The accuracy of the proposed model is observed via Modified Normalized Sum of Squared Errors index equal to 3.8979%.

BioModels: expanding horizons to include more modelling approaches and formats.

Science.gov (United States)

Glont, Mihai; Nguyen, Tung V N; Graesslin, Martin; Hälke, Robert; Ali, Raza; Schramm, Jochen; Wimalaratne, Sarala M; Kothamachu, Varun B; Rodriguez, Nicolas; Swat, Maciej J; Eils, Jurgen; Eils, Roland; Laibe, Camille; Malik-Sheriff, Rahuman S; Chelliah, Vijayalakshmi; Le Novère, Nicolas; Hermjakob, Henning

2018-01-04

BioModels serves as a central repository of mathematical models representing biological processes. It offers a platform to make mathematical models easily shareable across the systems modelling community, thereby supporting model reuse. To facilitate hosting a broader range of model formats derived from diverse modelling approaches and tools, a new infrastructure for BioModels has been developed that is available at http://www.ebi.ac.uk/biomodels. This new system allows submitting and sharing of a wide range of models with improved support for formats other than SBML. It also offers a version-control backed environment in which authors and curators can work collaboratively to curate models. This article summarises the features available in the current system and discusses the potential benefit they offer to the users over the previous system. In summary, the new portal broadens the scope of models accepted in BioModels and supports collaborative model curation which is crucial for model reproducibility and sharing. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

A thermal conductivity model for nanofluids including effect of the temperature-dependent interfacial layer

International Nuclear Information System (INIS)

Sitprasert, Chatcharin; Dechaumphai, Pramote; Juntasaro, Varangrat

2009-01-01

The interfacial layer of nanoparticles has been recently shown to have an effect on the thermal conductivity of nanofluids. There is, however, still no thermal conductivity model that includes the effects of temperature and nanoparticle size variations on the thickness and consequently on the thermal conductivity of the interfacial layer. In the present work, the stationary model developed by Leong et al. (J Nanopart Res 8:245-254, 2006) is initially modified to include the thermal dispersion effect due to the Brownian motion of nanoparticles. This model is called the 'Leong et al.'s dynamic model'. However, the Leong et al.'s dynamic model over-predicts the thermal conductivity of nanofluids in the case of the flowing fluid. This suggests that the enhancement in the thermal conductivity of the flowing nanofluids due to the increase in temperature does not come from the thermal dispersion effect. It is more likely that the enhancement in heat transfer of the flowing nanofluids comes from the temperature-dependent interfacial layer effect. Therefore, the Leong et al.'s stationary model is again modified to include the effect of temperature variation on the thermal conductivity of the interfacial layer for different sizes of nanoparticles. This present model is then evaluated and compared with the other thermal conductivity models for the turbulent convective heat transfer in nanofluids along a uniformly heated tube. The results show that the present model is more general than the other models in the sense that it can predict both the temperature and the volume fraction dependence of the thermal conductivity of nanofluids for both non-flowing and flowing fluids. Also, it is found to be more accurate than the other models due to the inclusion of the effect of the temperature-dependent interfacial layer. In conclusion, the present model can accurately predict the changes in thermal conductivity of nanofluids due to the changes in volume fraction and temperature for

Infrared Thermometer: an accurate tool for temperature measurement during renal surgery

Directory of Open Access Journals (Sweden)

Giovanni Scala Marchini

2013-07-01

Full Text Available Purpose To evaluate infrared thermometer (IRT accuracy compared to standard digital thermometer in measuring kidney temperature during arterial clamping with and without renal cooling. Materials and Methods 20 pigs weighting 20Kg underwent selective right renal arterial clamping, 10 with (Group 1 - Cold Ischemia with ice slush and 10 without renal cooling (Group 2 - Warm Ischemia. Arterial clamping was performed without venous clamping. Renal temperature was serially measured following clamping of the main renal artery with the IRT and a digital contact thermometer (DT: immediate after clamping (T0, after 2 (T2, 5 (T5 and 10 minutes (T10. Temperature values were expressed in mean, standard deviation and range for each thermometer. We used the T student test to compare means and considered p < 0.05 to be statistically significant. Results In Group 1, mean DT surface temperature decrease was 12.6 ± 4.1°C (5-19°C while deep DT temperature decrease was 15.8 ± 1.5°C (15-18°C. For the IRT, mean temperature decrease was 9.1 ± 3.8°C (3-14°C. There was no statistically significant difference between thermometers. In Group 2, surface temperature decrease for DT was 2.7 ± 1.8°C (0-4°C and mean deep temperature decrease was 0.5 ± 1.0°C (0-3°C. For IRT, mean temperature decrease was 3.1 ± 1.9°C (0-6°C. No statistically significant difference between thermometers was found at any time point. conclusions IRT proved to be an accurate non-invasive precise device for renal temperature monitoring during kidney surgery. External ice slush cooling confirmed to be fast and effective at cooling the pig model. IRT = Infrared thermometer DT = Digital contact thermometer D:S = Distance-to-spot ratio

Turning the Page on Pen-and-Paper Questionnaires: Combining Ecological Momentary Assessment and Computer Adaptive Testing to Transform Psychological Assessment in the 21st Century.

Science.gov (United States)

Gibbons, Chris J

2016-01-01

The current paper describes new opportunities for patient-centred assessment methods which have come about by the increased adoption of affordable smart technologies in biopsychosocial research and medical care. In this commentary, we review modern assessment methods including item response theory (IRT), computer adaptive testing (CAT), and ecological momentary assessment (EMA) and explain how these methods may be combined to improve psychological assessment. We demonstrate both how a 'naïve' selection of a small group of items in an EMA can lead to unacceptably unreliable assessments and how IRT can provide detailed information on the individual information that each item gives thus allowing short form assessments to be selected with acceptable reliability. The combination of CAT and IRT can ensure assessments are precise, efficient, and well targeted to the individual; allowing EMAs to be both brief and accurate.

Modeling of Temperature-Dependent Noise in Silicon Nanowire FETs including Self-Heating Effects

Directory of Open Access Journals (Sweden)

P. Anandan

2014-01-01

Full Text Available Silicon nanowires are leading the CMOS era towards the downsizing limit and its nature will be effectively suppress the short channel effects. Accurate modeling of thermal noise in nanowires is crucial for RF applications of nano-CMOS emerging technologies. In this work, a perfect temperature-dependent model for silicon nanowires including the self-heating effects has been derived and its effects on device parameters have been observed. The power spectral density as a function of thermal resistance shows significant improvement as the channel length decreases. The effects of thermal noise including self-heating of the device are explored. Moreover, significant reduction in noise with respect to channel thermal resistance, gate length, and biasing is analyzed.

[Cloning and expression analysis of a zinc-regulated transporters (ZRT), iron-regulated transporter (IRT)-like protein encoding gene in Dendrobium officinale].

Science.gov (United States)

Zhang, Gang; Li, Yi-Min; Li, Biao; Zhang, Da-Wei; Guo, Shun-Xing

2015-01-01

The zinc-regulated transporters (ZRT), iron-regulated transporter (IRT)-like protein (ZIP) plays an important role in the growth and development of plant. In this study, a full length cDNA of ZIP encoding gene, designed as DoZIP1 (GenBank accession KJ946203), was identified from Dendrobium officinale using RT-PCR and RACE. Bioinformatics analysis showed that DoZIP1 consisted of a 1,056 bp open reading frame (ORF) encoded a 351-aa protein with a molecular weight of 37.57 kDa and an isoelectric point (pI) of 6.09. The deduced DoZIP1 protein contained the conserved ZIP domain, and its secondary structure was composed of 50.71% alpha helix, 11.11% extended strand, 36.18% random coil, and beta turn 1.99%. DoZIP1 protein exhibited a signal peptide and eight transmembrane domains, presumably locating in cell membrane. The amino acid sequence had high homology with ZIP proteins from Arabidopsis, alfalfa and rice. A phylogenetic tree analysis demonstrated that DoZIP1 was closely related to AtZIP10 and OsZIP3, and they were clustered into one clade. Real time quantitative PCR analysis demonstrated that the transcription level of DoZIP1 in D. officinale roots was the highest (4.19 fold higher than that of stems), followed by that of leaves (1.12 fold). Molecular characters of DoZIP1 will be useful for further functional determination of the gene involving in the growth and development of D. officinale.

Seepage Model for PA Including Drift Collapse

International Nuclear Information System (INIS)

Li, G.; Tsang, C.

2000-01-01

The purpose of this Analysis/Model Report (AMR) is to document the predictions and analysis performed using the Seepage Model for Performance Assessment (PA) and the Disturbed Drift Seepage Submodel for both the Topopah Spring middle nonlithophysal and lower lithophysal lithostratigraphic units at Yucca Mountain. These results will be used by PA to develop the probability distribution of water seepage into waste-emplacement drifts at Yucca Mountain, Nevada, as part of the evaluation of the long term performance of the potential repository. This AMR is in accordance with the ''Technical Work Plan for Unsaturated Zone (UZ) Flow and Transport Process Model Report'' (CRWMS M andO 2000 [153447]). This purpose is accomplished by performing numerical simulations with stochastic representations of hydrological properties, using the Seepage Model for PA, and evaluating the effects of an alternative drift geometry representing a partially collapsed drift using the Disturbed Drift Seepage Submodel. Seepage of water into waste-emplacement drifts is considered one of the principal factors having the greatest impact of long-term safety of the repository system (CRWMS M andO 2000 [153225], Table 4-1). This AMR supports the analysis and simulation that are used by PA to develop the probability distribution of water seepage into drift, and is therefore a model of primary (Level 1) importance (AP-3.15Q, ''Managing Technical Product Inputs''). The intended purpose of the Seepage Model for PA is to support: (1) PA; (2) Abstraction of Drift-Scale Seepage; and (3) Unsaturated Zone (UZ) Flow and Transport Process Model Report (PMR). Seepage into drifts is evaluated by applying numerical models with stochastic representations of hydrological properties and performing flow simulations with multiple realizations of the permeability field around the drift. The Seepage Model for PA uses the distribution of permeabilities derived from air injection testing in niches and in the cross drift to

Seepage Model for PA Including Dift Collapse

Energy Technology Data Exchange (ETDEWEB)

G. Li; C. Tsang

2000-12-20

The purpose of this Analysis/Model Report (AMR) is to document the predictions and analysis performed using the Seepage Model for Performance Assessment (PA) and the Disturbed Drift Seepage Submodel for both the Topopah Spring middle nonlithophysal and lower lithophysal lithostratigraphic units at Yucca Mountain. These results will be used by PA to develop the probability distribution of water seepage into waste-emplacement drifts at Yucca Mountain, Nevada, as part of the evaluation of the long term performance of the potential repository. This AMR is in accordance with the ''Technical Work Plan for Unsaturated Zone (UZ) Flow and Transport Process Model Report'' (CRWMS M&O 2000 [153447]). This purpose is accomplished by performing numerical simulations with stochastic representations of hydrological properties, using the Seepage Model for PA, and evaluating the effects of an alternative drift geometry representing a partially collapsed drift using the Disturbed Drift Seepage Submodel. Seepage of water into waste-emplacement drifts is considered one of the principal factors having the greatest impact of long-term safety of the repository system (CRWMS M&O 2000 [153225], Table 4-1). This AMR supports the analysis and simulation that are used by PA to develop the probability distribution of water seepage into drift, and is therefore a model of primary (Level 1) importance (AP-3.15Q, ''Managing Technical Product Inputs''). The intended purpose of the Seepage Model for PA is to support: (1) PA; (2) Abstraction of Drift-Scale Seepage; and (3) Unsaturated Zone (UZ) Flow and Transport Process Model Report (PMR). Seepage into drifts is evaluated by applying numerical models with stochastic representations of hydrological properties and performing flow simulations with multiple realizations of the permeability field around the drift. The Seepage Model for PA uses the distribution of permeabilities derived from air injection testing in

Particle-based modeling of heterogeneous chemical kinetics including mass transfer.

Science.gov (United States)

Sengar, A; Kuipers, J A M; van Santen, Rutger A; Padding, J T

2017-08-01

Connecting the macroscopic world of continuous fields to the microscopic world of discrete molecular events is important for understanding several phenomena occurring at physical boundaries of systems. An important example is heterogeneous catalysis, where reactions take place at active surfaces, but the effective reaction rates are determined by transport limitations in the bulk fluid and reaction limitations on the catalyst surface. In this work we study the macro-micro connection in a model heterogeneous catalytic reactor by means of stochastic rotation dynamics. The model is able to resolve the convective and diffusive interplay between participating species, while including adsorption, desorption, and reaction processes on the catalytic surface. Here we apply the simulation methodology to a simple straight microchannel with a catalytic strip. Dimensionless Damkohler numbers are used to comment on the spatial concentration profiles of reactants and products near the catalyst strip and in the bulk. We end the discussion with an outlook on more complicated geometries and increasingly complex reactions.

Particle-based modeling of heterogeneous chemical kinetics including mass transfer

Science.gov (United States)

Sengar, A.; Kuipers, J. A. M.; van Santen, Rutger A.; Padding, J. T.

2017-08-01

Connecting the macroscopic world of continuous fields to the microscopic world of discrete molecular events is important for understanding several phenomena occurring at physical boundaries of systems. An important example is heterogeneous catalysis, where reactions take place at active surfaces, but the effective reaction rates are determined by transport limitations in the bulk fluid and reaction limitations on the catalyst surface. In this work we study the macro-micro connection in a model heterogeneous catalytic reactor by means of stochastic rotation dynamics. The model is able to resolve the convective and diffusive interplay between participating species, while including adsorption, desorption, and reaction processes on the catalytic surface. Here we apply the simulation methodology to a simple straight microchannel with a catalytic strip. Dimensionless Damkohler numbers are used to comment on the spatial concentration profiles of reactants and products near the catalyst strip and in the bulk. We end the discussion with an outlook on more complicated geometries and increasingly complex reactions.

Observational constraint on the interacting dark energy models including the Sandage-Loeb test

Science.gov (United States)

Zhang, Ming-Jian; Liu, Wen-Biao

2014-05-01

Two types of interacting dark energy models are investigated using the type Ia supernova (SNIa), observational data (OHD), cosmic microwave background shift parameter, and the secular Sandage-Loeb (SL) test. In the investigation, we have used two sets of parameter priors including WMAP-9 and Planck 2013. They have shown some interesting differences. We find that the inclusion of SL test can obviously provide a more stringent constraint on the parameters in both models. For the constant coupling model, the interaction term has been improved to be only a half of the original scale on corresponding errors. Comparing with only SNIa and OHD, we find that the inclusion of the SL test almost reduces the best-fit interaction to zero, which indicates that the higher-redshift observation including the SL test is necessary to track the evolution of the interaction. For the varying coupling model, data with the inclusion of the SL test show that the parameter at C.L. in Planck priors is , where the constant is characteristic for the severity of the coincidence problem. This indicates that the coincidence problem will be less severe. We then reconstruct the interaction , and we find that the best-fit interaction is also negative, similar to the constant coupling model. However, for a high redshift, the interaction generally vanishes at infinity. We also find that the phantom-like dark energy with is favored over the CDM model.

MEMLS3&a: Microwave Emission Model of Layered Snowpacks adapted to include backscattering

Directory of Open Access Journals (Sweden)

M. Proksch

2015-08-01

Full Text Available The Microwave Emission Model of Layered Snowpacks (MEMLS was originally developed for microwave emissions of snowpacks in the frequency range 5–100 GHz. It is based on six-flux theory to describe radiative transfer in snow including absorption, multiple volume scattering, radiation trapping due to internal reflection and a combination of coherent and incoherent superposition of reflections between horizontal layer interfaces. Here we introduce MEMLS3&a, an extension of MEMLS, which includes a backscatter model for active microwave remote sensing of snow. The reflectivity is decomposed into diffuse and specular components. Slight undulations of the snow surface are taken into account. The treatment of like- and cross-polarization is accomplished by an empirical splitting parameter q. MEMLS3&a (as well as MEMLS is set up in a way that snow input parameters can be derived by objective measurement methods which avoid fitting procedures of the scattering efficiency of snow, required by several other models. For the validation of the model we have used a combination of active and passive measurements from the NoSREx (Nordic Snow Radar Experiment campaign in Sodankylä, Finland. We find a reasonable agreement between the measurements and simulations, subject to uncertainties in hitherto unmeasured input parameters of the backscatter model. The model is written in Matlab and the code is publicly available for download through the following website: http://www.iapmw.unibe.ch/research/projects/snowtools/memls.html.

Dipole model analysis of highest precision HERA data, including very low Q"2's

International Nuclear Information System (INIS)

Luszczak, A.; Kowalski, H.

2016-12-01

We analyse, within a dipole model, the final, inclusive HERA DIS cross section data in the low χ region, using fully correlated errors. We show, that these highest precision data are very well described within the dipole model framework starting from Q"2 values of 3.5 GeV"2 to the highest values of Q"2=250 GeV"2. To analyze the saturation effects we evaluated the data including also the very low 0.35< Q"2 GeV"2 region. The fits including this region show a preference of the saturation ansatz.

Multidimensional student skills with collaborative filtering

Science.gov (United States)

Bergner, Yoav; Rayyan, Saif; Seaton, Daniel; Pritchard, David E.

2013-01-01

Despite the fact that a physics course typically culminates in one final grade for the student, many instructors and researchers believe that there are multiple skills that students acquire to achieve mastery. Assessment validation and data analysis in general may thus benefit from extension to multidimensional ability. This paper introduces an approach for model determination and dimensionality analysis using collaborative filtering (CF), which is related to factor analysis and item response theory (IRT). Model selection is guided by machine learning perspectives, seeking to maximize the accuracy in predicting which students will answer which items correctly. We apply the CF to response data for the Mechanics Baseline Test and combine the results with prior analysis using unidimensional IRT.

Criteria for eliminating items of a Test of Figural Analogies

Directory of Open Access Journals (Sweden)

Diego Blum

2013-12-01

Full Text Available This paper describes the steps taken to eliminate two of the items in a Test of Figural Analogies (TFA. The main guidelines of psychometric analysis concerning Classical Test Theory (CTT and Item Response Theory (IRT are explained. The item elimination process was based on both the study of the CTT difficulty and discrimination index, and the unidimensionality analysis. The a, b, and c parameters of the Three Parameter Logistic Model of IRT were also considered for this purpose, as well as the assessment of each item fitting this model. The unfavourable characteristics of a group of TFA items are detailed, and decisions leading to their possible elimination are discussed.

A speech production model including the nasal Cavity

DEFF Research Database (Denmark)

Olesen, Morten

In order to obtain articulatory analysis of speech production the model is improved. the standard model, as used in LPC analysis, to a large extent only models the acoustic properties of speech signal as opposed to articulatory modelling of the speech production. In spite of this the LPC model...... is by far the most widely used model in speech technology....

Calibrating the Medical Council of Canada's Qualifying Examination Part I using an integrated item response theory framework: a comparison of models and designs.

Science.gov (United States)

De Champlain, Andre F; Boulais, Andre-Philippe; Dallas, Andrew

2016-01-01

The aim of this research was to compare different methods of calibrating multiple choice question (MCQ) and clinical decision making (CDM) components for the Medical Council of Canada's Qualifying Examination Part I (MCCQEI) based on item response theory. Our data consisted of test results from 8,213 first time applicants to MCCQEI in spring and fall 2010 and 2011 test administrations. The data set contained several thousand multiple choice items and several hundred CDM cases. Four dichotomous calibrations were run using BILOG-MG 3.0. All 3 mixed item format (dichotomous MCQ responses and polytomous CDM case scores) calibrations were conducted using PARSCALE 4. The 2-PL model had identical numbers of items with chi-square values at or below a Type I error rate of 0.01 (83/3,499 or 0.02). In all 3 polytomous models, whether the MCQs were either anchored or concurrently run with the CDM cases, results suggest very poor fit. All IRT abilities estimated from dichotomous calibration designs correlated very highly with each other. IRT-based pass-fail rates were extremely similar, not only across calibration designs and methods, but also with regard to the actual reported decision to candidates. The largest difference noted in pass rates was 4.78%, which occurred between the mixed format concurrent 2-PL graded response model (pass rate= 80.43%) and the dichotomous anchored 1-PL calibrations (pass rate= 85.21%). Simpler calibration designs with dichotomized items should be implemented. The dichotomous calibrations provided better fit of the item response matrix than more complex, polytomous calibrations.

Screening for cystic fibrosis via a magnetic and microfluidic immunoassay format with electrochemical detection using a copper nanoparticle-modified gold electrode

International Nuclear Information System (INIS)

Benuzzi, Maria Luz Scala; Pereira, Sirley V.; Raba, Julio; Messina, Germán A.

2016-01-01

This article describes a microfluidic electrochemical immunoassay that features two strategies, viz. (a), the incorporation of magnetic nanoparticles (MNPs) into the central microfluidic channel and acting as a bioaffinity support for the immobilization of the antibody against the immunoreactive trypsin (anti-IRT), and (b), the electrodeposition of copper nanoparticles (CuNPs) on a gold electrode. IRT, a marker for cystic fibrosis, is extracted from blood samples onto a disk using ultrasonication, eluted, and then injected into the detection system where it is captured by anti-IRT-loaded nanoparticles (anti-IRT-Ab-MNPs). Bound IRT is electrochemically quantified after addition of HRP-labeled anti-IRT-Ab which, in the presence of H 2 O 2 , catalyzes the oxidation of catechol to form o-benzoquinone which is detected at a working potential of −1 50 mV (vs. Ag/AgCl). The electrochemical response to benzoquinone is proportional to the concentration of IRT in the range from 0 to 580 ng⋅mL −1 . The coefficients of variation are <5 % for within-day assays, and <6.4 % for between-day assays. The method was compared to a commercial ELISA for IRT where is showed a correlation coefficient of close to 1. In our perception, this approach represents an attractive alternative to existing methods for screening newborns for cystic fibrosis. (author)

Including an ocean carbon cycle model into iLOVECLIM (v1.0)

NARCIS (Netherlands)

Bouttes, N.; Roche, D.M.V.A.P.; Mariotti, V.; Bopp, L.

2015-01-01

The atmospheric carbon dioxide concentration plays a crucial role in the radiative balance and as such has a strong influence on the evolution of climate. Because of the numerous interactions between climate and the carbon cycle, it is necessary to include a model of the carbon cycle within a

A range of complex probabilistic models for RNA secondary structure prediction that includes the nearest-neighbor model and more.

Science.gov (United States)

Rivas, Elena; Lang, Raymond; Eddy, Sean R

2012-02-01

The standard approach for single-sequence RNA secondary structure prediction uses a nearest-neighbor thermodynamic model with several thousand experimentally determined energy parameters. An attractive alternative is to use statistical approaches with parameters estimated from growing databases of structural RNAs. Good results have been reported for discriminative statistical methods using complex nearest-neighbor models, including CONTRAfold, Simfold, and ContextFold. Little work has been reported on generative probabilistic models (stochastic context-free grammars [SCFGs]) of comparable complexity, although probabilistic models are generally easier to train and to use. To explore a range of probabilistic models of increasing complexity, and to directly compare probabilistic, thermodynamic, and discriminative approaches, we created TORNADO, a computational tool that can parse a wide spectrum of RNA grammar architectures (including the standard nearest-neighbor model and more) using a generalized super-grammar that can be parameterized with probabilities, energies, or arbitrary scores. By using TORNADO, we find that probabilistic nearest-neighbor models perform comparably to (but not significantly better than) discriminative methods. We find that complex statistical models are prone to overfitting RNA structure and that evaluations should use structurally nonhomologous training and test data sets. Overfitting has affected at least one published method (ContextFold). The most important barrier to improving statistical approaches for RNA secondary structure prediction is the lack of diversity of well-curated single-sequence RNA secondary structures in current RNA databases.

Refitting density dependent relativistic model parameters including Center-of-Mass corrections

International Nuclear Information System (INIS)

Avancini, Sidney S.; Marinelli, Jose R.; Carlson, Brett Vern

2011-01-01

Full text: Relativistic mean field models have become a standard approach for precise nuclear structure calculations. After the seminal work of Serot and Walecka, which introduced a model Lagrangian density where the nucleons interact through the exchange of scalar and vector mesons, several models were obtained through its generalization, including other meson degrees of freedom, non-linear meson interactions, meson-meson interactions, etc. More recently density dependent coupling constants were incorporated into the Walecka-like models, which are then extensively used. In particular, for these models a connection with the density functional theory can be established. Due to the inherent difficulties presented by field theoretical models, only the mean field approximation is used for the solution of these models. In order to calculate finite nuclei properties in the mean field approximation, a reference set has to be fixed and therefore the translational symmetry is violated. It is well known that in such case spurious effects due to the center-of-mass (COM) motion are present, which are more pronounced for light nuclei. In a previous work we have proposed a technique based on the Pierls-Yoccoz projection operator applied to the mean-field relativistic solution, in order to project out spurious COM contributions. In this work we obtain a new fitting for the density dependent parameters of a density dependent hadronic model, taking into account the COM corrections. Our fitting is obtained taking into account the charge radii and binding energies for He 4 , O 16 , Ca 40 , Ca 48 , Ni 56 , Ni 68 , Sn 100 , Sn 132 and Pb 208 . We show that the nuclear observables calculated using our fit are of a quality comparable to others that can be found in the literature, with the advantage that now a translational invariant many-body wave function is at our disposal. (author)

A numerical model including PID control of a multizone crystal growth furnace

Science.gov (United States)

Panzarella, Charles H.; Kassemi, Mohammad

1992-01-01

This paper presents a 2D axisymmetric combined conduction and radiation model of a multizone crystal growth furnace. The model is based on a programmable multizone furnace (PMZF) designed and built at NASA Lewis Research Center for growing high quality semiconductor crystals. A novel feature of this model is a control algorithm which automatically adjusts the power in any number of independently controlled heaters to establish the desired crystal temperatures in the furnace model. The control algorithm eliminates the need for numerous trial and error runs previously required to obtain the same results. The finite element code, FIDAP, used to develop the furnace model, was modified to directly incorporate the control algorithm. This algorithm, which presently uses PID control, and the associated heat transfer model are briefly discussed. Together, they have been used to predict the heater power distributions for a variety of furnace configurations and desired temperature profiles. Examples are included to demonstrate the effectiveness of the PID controlled model in establishing isothermal, Bridgman, and other complicated temperature profies in the sample. Finally, an example is given to show how the algorithm can be used to change the desired profile with time according to a prescribed temperature-time evolution.

Safe distance car-following model including backward-looking and its stability analysis

Science.gov (United States)

Yang, Da; Jin, Peter Jing; Pu, Yun; Ran, Bin

2013-03-01

The focus of this paper is the car-following behavior including backward-looking, simply called the bi-directional looking car-following behavior. This study is motivated by the potential changes of the physical properties of traffic flow caused by the fast developing intelligent transportation system (ITS), especially the new connected vehicle technology. Existing studies on this topic focused on general motors (GM) models and optimal velocity (OV) models. The safe distance car-following model, Gipps' model, which is more widely used in practice have not drawn too much attention in the bi-directional looking context. This paper explores the property of the bi-directional looking extension of Gipps' safe distance model. The stability condition of the proposed model is derived using the linear stability theory and is verified using numerical simulations. The impacts of the driver and vehicle characteristics appeared in the proposed model on the traffic flow stability are also investigated. It is found that taking into account the backward-looking effect in car-following has three types of effect on traffic flow: stabilizing, destabilizing and producing non-physical phenomenon. This conclusion is more sophisticated than the study results based on the OV bi-directional looking car-following models. Moreover, the drivers who have the smaller reaction time or the larger additional delay and think the other vehicles have larger maximum decelerations can stabilize traffic flow.

SPheno 3.1: extensions including flavour, CP-phases and models beyond the MSSM

Science.gov (United States)

Porod, W.; Staub, F.

2012-11-01

We describe recent extensions of the program SPhenoincluding flavour aspects, CP-phases, R-parity violation and low energy observables. In case of flavour mixing all masses of supersymmetric particles are calculated including the complete flavour structure and all possible CP-phases at the 1-loop level. We give details on implemented seesaw models, low energy observables and the corresponding extension of the SUSY Les Houches Accord. Moreover, we comment on the possibilities to include MSSM extensions in SPheno. Catalogue identifier: ADRV_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADRV_v2_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 154062 No. of bytes in distributed program, including test data, etc.: 1336037 Distribution format: tar.gz Programming language: Fortran95. Computer: PC running under Linux, should run in every Unix environment. Operating system: Linux, Unix. Classification: 11.6. Catalogue identifier of previous version: ADRV_v1_0 Journal reference of previous version: Comput. Phys. Comm. 153(2003)275 Does the new version supersede the previous version?: Yes Nature of problem: The first issue is the determination of the masses and couplings of supersymmetric particles in various supersymmetric models, the R-parity conserved MSSM with generation mixing and including CP-violating phases, various seesaw extensions of the MSSM and the MSSM with bilinear R-parity breaking. Low energy data on Standard Model fermion masses, gauge couplings and electroweak gauge boson masses serve as constraints. Radiative corrections from supersymmetric particles to these inputs must be calculated. Theoretical constraints on the soft SUSY breaking parameters from a high scale theory are imposed and the parameters at the electroweak scale are obtained from the

Enhanced battery model including temperature effects

NARCIS (Netherlands)

Rosca, B.; Wilkins, S.

2013-01-01

Within electric and hybrid vehicles, batteries are used to provide/buffer the energy required for driving. However, battery performance varies throughout the temperature range specific to automotive applications, and as such, models that describe this behaviour are required. This paper presents a

An item response theory analysis of the Olweus Bullying scale.

Science.gov (United States)

Breivik, Kyrre; Olweus, Dan

2014-12-02

In the present article, we used IRT (graded response) modeling as a useful technology for a detailed and refined study of the psychometric properties of the various items of the Olweus Bullying scale and the scale itself. The sample consisted of a very large number of Norwegian 4th-10th grade students (n = 48 926). The IRT analyses revealed that the scale was essentially unidimensional and had excellent reliability in the upper ranges of the latent bullying tendency trait, as intended and desired. Gender DIF effects were identified with regard to girls' use of indirect bullying by social exclusion and boys' use of physical bullying by hitting and kicking but these effects were small and worked in opposite directions, having negligible effects at the scale level. Also scale scores adjusted for DIF effects differed very little from non-adjusted scores. In conclusion, the empirical data were well characterized by the chosen IRT model and the Olweus Bullying scale was considered well suited for the conduct of fair and reliable comparisons involving different gender-age groups. Information Aggr. Behav. 9999:XX-XX, 2014. © 2014 Wiley Periodicals, Inc. © 2014 Wiley Periodicals, Inc.

Item response theory analyses of the Delis-Kaplan Executive Function System card sorting subtest.

Science.gov (United States)

Spencer, Mercedes; Cho, Sun-Joo; Cutting, Laurie E

2018-02-02

In the current study, we examined the dimensionality of the 16-item Card Sorting subtest of the Delis-Kaplan Executive Functioning System assessment in a sample of 264 native English-speaking children between the ages of 9 and 15 years. We also tested for measurement invariance for these items across age and gender groups using item response theory (IRT). Results of the exploratory factor analysis indicated that a two-factor model that distinguished between verbal and perceptual items provided the best fit to the data. Although the items demonstrated measurement invariance across age groups, measurement invariance was violated for gender groups, with two items demonstrating differential item functioning for males and females. Multigroup analysis using all 16 items indicated that the items were more effective for individuals whose IRT scale scores were relatively high. A single-group explanatory IRT model using 14 non-differential item functioning items showed that for perceptual ability, females scored higher than males and that scores increased with age for both males and females; for verbal ability, the observed increase in scores across age differed for males and females. The implications of these findings are discussed.

Measuring stigma after spinal cord injury: Development and psychometric characteristics of the SCI-QOL Stigma item bank and short form.

Science.gov (United States)

Kisala, Pamela A; Tulsky, David S; Pace, Natalie; Victorson, David; Choi, Seung W; Heinemann, Allen W

2015-05-01

To develop a calibrated item bank and computer adaptive test (CAT) to assess the effects of stigma on health-related quality of life in individuals with spinal cord injury (SCI). Grounded-theory based qualitative item development methods, large-scale item calibration field testing, confirmatory factor analysis, and item response theory (IRT)-based psychometric analyses. Five SCI Model System centers and one Department of Veterans Affairs medical center in the United States. Adults with traumatic SCI. SCI-QOL Stigma Item Bank A sample of 611 individuals with traumatic SCI completed 30 items assessing SCI-related stigma. After 7 items were iteratively removed, factor analyses confirmed a unidimensional pool of items. Graded Response Model IRT analyses were used to estimate slopes and thresholds for the final 23 items. The SCI-QOL Stigma item bank is unique not only in the assessment of SCI-related stigma but also in the inclusion of individuals with SCI in all phases of its development. Use of confirmatory factor analytic and IRT methods provide flexibility and precision of measurement. The item bank may be administered as a CAT or as a 10-item fixed-length short form and can be used for research and clinical applications.

Models of epidemics: when contact repetition and clustering should be included

Directory of Open Access Journals (Sweden)

Scholz Roland W

2009-06-01

Full Text Available Abstract Background The spread of infectious disease is determined by biological factors, e.g. the duration of the infectious period, and social factors, e.g. the arrangement of potentially contagious contacts. Repetitiveness and clustering of contacts are known to be relevant factors influencing the transmission of droplet or contact transmitted diseases. However, we do not yet completely know under what conditions repetitiveness and clustering should be included for realistically modelling disease spread. Methods We compare two different types of individual-based models: One assumes random mixing without repetition of contacts, whereas the other assumes that the same contacts repeat day-by-day. The latter exists in two variants, with and without clustering. We systematically test and compare how the total size of an outbreak differs between these model types depending on the key parameters transmission probability, number of contacts per day, duration of the infectious period, different levels of clustering and varying proportions of repetitive contacts. Results The simulation runs under different parameter constellations provide the following results: The difference between both model types is highest for low numbers of contacts per day and low transmission probabilities. The number of contacts and the transmission probability have a higher influence on this difference than the duration of the infectious period. Even when only minor parts of the daily contacts are repetitive and clustered can there be relevant differences compared to a purely random mixing model. Conclusion We show that random mixing models provide acceptable estimates of the total outbreak size if the number of contacts per day is high or if the per-contact transmission probability is high, as seen in typical childhood diseases such as measles. In the case of very short infectious periods, for instance, as in Norovirus, models assuming repeating contacts will also behave

A Non-Parametric Item Response Theory Evaluation of the CAGE Instrument Among Older Adults.

Science.gov (United States)

Abdin, Edimansyah; Sagayadevan, Vathsala; Vaingankar, Janhavi Ajit; Picco, Louisa; Chong, Siow Ann; Subramaniam, Mythily

2018-02-23

The validity of the CAGE using item response theory (IRT) has not yet been examined in older adult population. This study aims to investigate the psychometric properties of the CAGE using both non-parametric and parametric IRT models, assess whether there is any differential item functioning (DIF) by age, gender and ethnicity and examine the measurement precision at the cut-off scores. We used data from the Well-being of the Singapore Elderly study to conduct Mokken scaling analysis (MSA), dichotomous Rasch and 2-parameter logistic IRT models. The measurement precision at the cut-off scores were evaluated using classification accuracy (CA) and classification consistency (CC). The MSA showed the overall scalability H index was 0.459, indicating a medium performing instrument. All items were found to be homogenous, measuring the same construct and able to discriminate well between respondents with high levels of the construct and the ones with lower levels. The item discrimination ranged from 1.07 to 6.73 while the item difficulty ranged from 0.33 to 2.80. Significant DIF was found for 2-item across ethnic group. More than 90% (CC and CA ranged from 92.5% to 94.3%) of the respondents were consistently and accurately classified by the CAGE cut-off scores of 2 and 3. The current study provides new evidence on the validity of the CAGE from the IRT perspective. This study provides valuable information of each item in the assessment of the overall severity of alcohol problem and the precision of the cut-off scores in older adult population.

Technology and Teaching: Promoting Active Learning Using Individual Response Technology in Large Introductory Psychology Classes

Science.gov (United States)

Poirier, Christopher R.; Feldman, Robert S.

2007-01-01

Individual response technology (IRT), in which students use wireless handsets to communicate real-time responses, permits the recording and display of aggregated student responses during class. In comparison to a traditional class that did not employ IRT, students using IRT performed better on exams and held positive attitudes toward the…

Item Response Theory: Overview, Applications, and Promise for Institutional Research

Science.gov (United States)

Bowman, Nicholas A.; Herzog, Serge; Sharkness, Jessica

2014-01-01

Item Response Theory (IRT) is a measurement theory that is ideal for scale and test development in institutional research, but it is not without its drawbacks. This chapter provides an overview of IRT, describes an example of its use, and highlights the pros and cons of using IRT in applied settings.

Imagery rehearsal therapy in addition to treatment as usual for patients with diverse psychiatric diagnoses suffering from nightmares: a randomized controlled trial.

Science.gov (United States)

van Schagen, Annette M; Lancee, Jaap; de Groot, Izaäk W; Spoormaker, Victor I; van den Bout, Jan

2015-09-01

Nightmares are associated with psychopathology and daily distress. They are highly prevalent in a psychiatric population (30%). Currently, imagery rehearsal therapy (IRT) is the treatment of choice for nightmares. With IRT, the script of the nightmare is changed into a new dream, which is imagined during the day. However, the effects of IRT in a psychiatric population remain unknown. The aim of this study was to determine the effectiveness of IRT in a heterogeneous psychiatric population. Between January 2006 and July 2010, 90 patients with psychiatric disorders (DSM-IV-TR) were randomized to IRT or treatment-as-usual conditions. IRT consisted of 6 individual sessions added to the treatment as usual. Nightmare frequency was assessed using daily nightmare logs and the Nightmare Frequency Questionnaire. Nightmare distress was assessed using the Nightmare Distress Questionnaire and the Nightmare Effects Survey. General psychiatric symptoms were assessed using the Symptom Checklist-90 and a PTSD symptom questionnaire. Assessments were administered at the start of the trial, after the IRT and at follow-up 3 months later. IRT showed a moderate effect (Cohen d = 0.5-0.7, P effects were largely sustained at the 3-month follow-up (Cohen d = 0.4-0.6, P effective treatment for nightmares among patients with comorbid psychiatric disorders and can be employed in addition to the on-going treatment. ClinicalTrials.gov identifier: NCT00291031. © Copyright 2015 Physicians Postgraduate Press, Inc.

Effects of Instability Versus Traditional Resistance Training on Strength, Power and Velocity in Untrained Men

Science.gov (United States)

Maté-Muñoz, José Luis; Monroy, Antonio J. Antón; Jodra Jiménez, Pablo; Garnacho-Castaño, Manuel V.

2014-01-01

The purpose of this study was compare the effects of a traditional and an instability resistance circuit training program on upper and lower limb strength, power, movement velocity and jumping ability. Thirty-six healthy untrained men were assigned to two experimental groups and a control group. Subjects in the experimental groups performed a resistance circuit training program consisting of traditional exercises (TRT, n = 10) or exercises executed in conditions of instability (using BOSU® and TRX®) (IRT, n = 12). Both programs involved three days per week of training for a total of seven weeks. The following variables were determined before and after training: maximal strength (1RM), average (AV) and peak velocity (PV), average (AP) and peak power (PP), all during bench press (BP) and back squat (BS) exercises, along with squat jump (SJ) height and counter movement jump (CMJ) height. All variables were found to significantly improve (p <0.05) in response to both training programs. Major improvements were observed in SJ height (IRT = 22.1%, TRT = 20.1%), CMJ height (IRT = 17.7%, TRT = 15.2%), 1RM in BS (IRT = 13.03%, TRT = 12.6%), 1RM in BP (IRT = 4.7%, TRT = 4.4%), AP in BS (IRT = 10.5%, TRT = 9.3%), AP in BP (IRT = 2.4%, TRT = 8.1%), PP in BS (IRT=19.42%, TRT = 22.3%), PP in BP (IRT = 7.6%, TRT = 11.5%), AV in BS (IRT = 10.5%, TRT = 9.4%), and PV in BS (IRT = 8.6%, TRT = 4.5%). Despite such improvements no significant differences were detected in the posttraining variables recorded for the two experimental groups. These data indicate that a circuit training program using two instability training devices is as effective in untrained men as a program executed under stable conditions for improving strength (1RM), power, movement velocity and jumping ability. Key Points Similar adaptations in terms of gains in strength, power, movement velocity and jumping ability were produced in response to both training programs. Both the stability and instability approaches

Dynamic model of a micro-tubular solid oxide fuel cell stack including an integrated cooling system

Science.gov (United States)

Hering, Martin; Brouwer, Jacob; Winkler, Wolfgang

2017-02-01

A novel dynamic micro-tubular solid oxide fuel cell (MT-SOFC) and stack model including an integrated cooling system is developed using a quasi three-dimensional, spatially resolved, transient thermodynamic, physical and electrochemical model that accounts for the complex geometrical relations between the cells and cooling-tubes. The modeling approach includes a simplified tubular geometry and stack design including an integrated cooling structure, detailed pressure drop and gas property calculations, the electrical and physical constraints of the stack design that determine the current, as well as control strategies for the temperature. Moreover, an advanced heat transfer balance with detailed radiative heat transfer between the cells and the integrated cooling-tubes, convective heat transfer between the gas flows and the surrounding structures and conductive heat transfer between the solid structures inside of the stack, is included. The detailed model can be used as a design basis for the novel MT-SOFC stack assembly including an integrated cooling system, as well as for the development of a dynamic system control strategy. The evaluated best-case design achieves very high electrical efficiency between around 75 and 55% in the entire power density range between 50 and 550 mW /cm2 due to the novel stack design comprising an integrated cooling structure.

Looking Closer at the Effects of Framing on Risky Choice: An Item Response Theory Analysis.

Science.gov (United States)

Sickar; Highhouse

1998-07-01

Item response theory (IRT) methodology allowed an in-depth examination of several issues that would be difficult to explore using traditional methodology. IRT models were estimated for 4 risky-choice items, answered by students under either a gain or loss frame. Results supported the typical framing finding of risk-aversion for gains and risk-seeking for losses but also suggested that a latent construct we label preference for risk was influential in predicting risky choice. Also, the Asian Disease item, most often used in framing research, was found to have anomalous statistical properties when compared to other framing items. Copyright 1998 Academic Press.

Finite element modeling of contaminant transport in soils including the effect of chemical reactions.

Science.gov (United States)

Javadi, A A; Al-Najjar, M M

2007-05-17

The movement of chemicals through soils to the groundwater is a major cause of degradation of water resources. In many cases, serious human and stock health implications are associated with this form of pollution. Recent studies have shown that the current models and methods are not able to adequately describe the leaching of nutrients through soils, often underestimating the risk of groundwater contamination by surface-applied chemicals, and overestimating the concentration of resident solutes. Furthermore, the effect of chemical reactions on the fate and transport of contaminants is not included in many of the existing numerical models for contaminant transport. In this paper a numerical model is presented for simulation of the flow of water and air and contaminant transport through unsaturated soils with the main focus being on the effects of chemical reactions. The governing equations of miscible contaminant transport including advection, dispersion-diffusion and adsorption effects together with the effect of chemical reactions are presented. The mathematical framework and the numerical implementation of the model are described in detail. The model is validated by application to a number of test cases from the literature and is then applied to the simulation of a physical model test involving transport of contaminants in a block of soil with particular reference to the effects of chemical reactions. Comparison of the results of the numerical model with the experimental results shows that the model is capable of predicting the effects of chemical reactions with very high accuracy. The importance of consideration of the effects of chemical reactions is highlighted.

Including Effects of Water Stress on Dead Organic Matter Decay to a Forest Carbon Model

Science.gov (United States)

Kim, H.; Lee, J.; Han, S. H.; Kim, S.; Son, Y.

2017-12-01

Decay of dead organic matter is a key process of carbon (C) cycling in forest ecosystems. The change in decay rate depends on temperature sensitivity and moisture conditions. The Forest Biomass and Dead organic matter Carbon (FBDC) model includes a decay sub-model considering temperature sensitivity, yet does not consider moisture conditions as drivers of the decay rate change. This study aimed to improve the FBDC model by including a water stress function to the decay sub-model. Also, soil C sequestration under climate change with the FBDC model including the water stress function was simulated. The water stress functions were determined with data from decomposition study on Quercus variabilis forests and Pinus densiflora forests of Korea, and adjustment parameters of the functions were determined for both species. The water stress functions were based on the ratio of precipitation to potential evapotranspiration. Including the water stress function increased the explained variances of the decay rate by 19% for the Q. variabilis forests and 7% for the P. densiflora forests, respectively. The increase of the explained variances resulted from large difference in temperature range and precipitation range across the decomposition study plots. During the period of experiment, the mean annual temperature range was less than 3°C, while the annual precipitation ranged from 720mm to 1466mm. Application of the water stress functions to the FBDC model constrained increasing trend of temperature sensitivity under climate change, and thus increased the model-estimated soil C sequestration (Mg C ha-1) by 6.6 for the Q. variabilis forests and by 3.1 for the P. densiflora forests, respectively. The addition of water stress functions increased reliability of the decay rate estimation and could contribute to reducing the bias in estimating soil C sequestration under varying moisture condition. Acknowledgement: This study was supported by Korea Forest Service (2017044B10-1719-BB01)

Cross-cultural validity of the Spanish version of PHQ-9 among pregnant Peruvian women: a Rasch item response theory analysis.

Science.gov (United States)

Zhong, Qiuyue; Gelaye, Bizu; Fann, Jesse R; Sanchez, Sixto E; Williams, Michelle A

2014-04-01

We sought to evaluate the validity of the Spanish language version of the patient health questionnaire-9 (PHQ-9) depression scale in a large sample of pregnant Peruvian women using Rasch item response theory (IRT) approaches. We further sought to examine the appropriateness of the response formats, reliability and potential differential item functioning (DIF) by maternal age, educational attainment and employment status. This cross-sectional study was conducted among 1520 pregnant women in Lima, Peru. A structured interview was used to collect information on demographic characteristics and PHQ-9 items. Data from the PHQ-9 were fitted to the Rasch IRT model and tested for appropriate category ordering, the assumptions of unidimensionality and local independence, item fit, reliability and presence of DIF. The Spanish language version of PHQ-9 demonstrated unidimensionality, local independence, and acceptable fit for the Rasch IRT model. However, we detected disordered response categories for the original four response categories. After collapsing "more than half the days" and "nearly every day", the response categories ordered properly and the PHQ-9 fit the Rasch IRT model. The PHQ-9 had moderate internal consistency (person separation index, PSI=0.72). Additionally, the items of PHQ-9 were free of DIF with regard to age, educational attainment, and employment status. The Spanish language version of the PHQ-9 was shown to have item properties of an effective screening instrument. Collapsing rating scale categories and reconstructing three-point Likert scale for all items improved the fit of the instrument. Future studies are warranted to establish new cutoff scores and criterion validity of the three-point Likert scale response options for the Spanish language version of the PHQ-9. Copyright © 2014 Elsevier B.V. All rights reserved.

Validation of self-directed learning instrument and establishment of normative data for nursing students in taiwan: using polytomous item response theory.

Science.gov (United States)

Cheng, Su-Fen; Lee-Hsieh, Jane; Turton, Michael A; Lin, Kuan-Chia

2014-06-01

Little research has investigated the establishment of norms for nursing students' self-directed learning (SDL) ability, recognized as an important capability for professional nurses. An item response theory (IRT) approach was used to establish norms for SDL abilities valid for the different nursing programs in Taiwan. The purposes of this study were (a) to use IRT with a graded response model to reexamine the SDL instrument, or the SDLI, originally developed by this research team using confirmatory factor analysis and (b) to establish SDL ability norms for the four different nursing education programs in Taiwan. Stratified random sampling with probability proportional to size was used. A minimum of 15% of students from the four different nursing education degree programs across Taiwan was selected. A total of 7,879 nursing students from 13 schools were recruited. The research instrument was the 20-item SDLI developed by Cheng, Kuo, Lin, and Lee-Hsieh (2010). IRT with the graded response model was used with a two-parameter logistic model (discrimination and difficulty) for the data analysis, calculated using MULTILOG. Norms were established using percentile rank. Analysis of item information and test information functions revealed that 18 items exhibited very high discrimination and two items had high discrimination. The test information function was higher in this range of scores, indicating greater precision in the estimate of nursing student SDL. Reliability fell between .80 and .94 for each domain and the SDLI as a whole. The total information function shows that the SDLI is appropriate for all nursing students, except for the top 2.5%. SDL ability norms were established for each nursing education program and for the nation as a whole. IRT is shown to be a potent and useful methodology for scale evaluation. The norms for SDL established in this research will provide practical standards for nursing educators and students in Taiwan.

On the Relationships between Jeffreys Modal and Weighted Likelihood Estimation of Ability under Logistic IRT Models

Science.gov (United States)

Magis, David; Raiche, Gilles

2012-01-01

This paper focuses on two estimators of ability with logistic item response theory models: the Bayesian modal (BM) estimator and the weighted likelihood (WL) estimator. For the BM estimator, Jeffreys' prior distribution is considered, and the corresponding estimator is referred to as the Jeffreys modal (JM) estimator. It is established that under…

Item response theory - A first approach

Science.gov (United States)

Nunes, Sandra; Oliveira, Teresa; Oliveira, Amílcar

2017-07-01

The Item Response Theory (IRT) has become one of the most popular scoring frameworks for measurement data, frequently used in computerized adaptive testing, cognitively diagnostic assessment and test equating. According to Andrade et al. (2000), IRT can be defined as a set of mathematical models (Item Response Models - IRM) constructed to represent the probability of an individual giving the right answer to an item of a particular test. The number of Item Responsible Models available to measurement analysis has increased considerably in the last fifteen years due to increasing computer power and due to a demand for accuracy and more meaningful inferences grounded in complex data. The developments in modeling with Item Response Theory were related with developments in estimation theory, most remarkably Bayesian estimation with Markov chain Monte Carlo algorithms (Patz & Junker, 1999). The popularity of Item Response Theory has also implied numerous overviews in books and journals, and many connections between IRT and other statistical estimation procedures, such as factor analysis and structural equation modeling, have been made repeatedly (Van der Lindem & Hambleton, 1997). As stated before the Item Response Theory covers a variety of measurement models, ranging from basic one-dimensional models for dichotomously and polytomously scored items and their multidimensional analogues to models that incorporate information about cognitive sub-processes which influence the overall item response process. The aim of this work is to introduce the main concepts associated with one-dimensional models of Item Response Theory, to specify the logistic models with one, two and three parameters, to discuss some properties of these models and to present the main estimation procedures.

Comparison of CTT and Rasch-based approaches for the analysis of longitudinal Patient Reported Outcomes.

Science.gov (United States)

Blanchin, Myriam; Hardouin, Jean-Benoit; Le Neel, Tanguy; Kubis, Gildas; Blanchard, Claire; Mirallié, Eric; Sébille, Véronique

2011-04-15

Health sciences frequently deal with Patient Reported Outcomes (PRO) data for the evaluation of concepts, in particular health-related quality of life, which cannot be directly measured and are often called latent variables. Two approaches are commonly used for the analysis of such data: Classical Test Theory (CTT) and Item Response Theory (IRT). Longitudinal data are often collected to analyze the evolution of an outcome over time. The most adequate strategy to analyze longitudinal latent variables, which can be either based on CTT or IRT models, remains to be identified. This strategy must take into account the latent characteristic of what PROs are intended to measure as well as the specificity of longitudinal designs. A simple and widely used IRT model is the Rasch model. The purpose of our study was to compare CTT and Rasch-based approaches to analyze longitudinal PRO data regarding type I error, power, and time effect estimation bias. Four methods were compared: the Score and Mixed models (SM) method based on the CTT approach, the Rasch and Mixed models (RM), the Plausible Values (PV), and the Longitudinal Rasch model (LRM) methods all based on the Rasch model. All methods have shown comparable results in terms of type I error, all close to 5 per cent. LRM and SM methods presented comparable power and unbiased time effect estimations, whereas RM and PV methods showed low power and biased time effect estimations. This suggests that RM and PV methods should be avoided to analyze longitudinal latent variables. Copyright © 2010 John Wiley & Sons, Ltd.

Applicability of Item Response Theory to the Korean Nurses' Licensing Examination

Directory of Open Access Journals (Sweden)

Geum-Hee Jeong

2005-06-01

Full Text Available To test the applicability of item response theory (IRT to the Korean Nurses' Licensing Examination (KNLE, item analysis was performed after testing the unidimensionality and goodness-of-fit. The results were compared with those based on classical test theory. The results of the 330-item KNLE administered to 12,024 examinees in January 2004 were analyzed. Unidimensionality was tested using DETECT and the goodness-of-fit was tested using WINSTEPS for the Rasch model and Bilog-MG for the two-parameter logistic model. Item analysis and ability estimation were done using WINSTEPS. Using DETECT, Dmax ranged from 0.1 to 0.23 for each subject. The mean square value of the infit and outfit values of all items using WINSTEPS ranged from 0.1 to 1.5, except for one item in pediatric nursing, which scored 1.53. Of the 330 items, 218 (42.7% were misfit using the two-parameter logistic model of Bilog-MG. The correlation coefficients between the difficulty parameter using the Rasch model and the difficulty index from classical test theory ranged from 0.9039 to 0.9699. The correlation between the ability parameter using the Rasch model and the total score from classical test theory ranged from 0.9776 to 0.9984. Therefore, the results of the KNLE fit unidimensionality and goodness-of-fit for the Rasch model. The KNLE should be a good sample for analysis according to the IRT Rasch model, so further research using IRT is possible.

A unitarized meson model including color Coulomb interaction

International Nuclear Information System (INIS)

Metzger, Kees.

1990-01-01

Ch. 1 gives a general introduction into the problem field of the thesis. It discusses in how far the internal structure of mesons is understood theoretically and which models exist. It discusses from a phenomenological point of view the problem of confinement indicates how quark models of mesons may provide insight in this phenomenon. In ch. 2 the formal theory of scattering in a system with confinement is given. It is shown how a coupled channel (CC) description and the work of other authors fit into this general framework. Explicit examples and arguments are given to support the CC treatment of such a system. In ch. 3 the full coupled-channel model as is employed in this thesis is presented. On the basis of arguments from the former chapters and the observed regularities in the experimental data, the choices underlying the model are supported. In this model confinement is described with a mass-dependent harmonic-oscillator potential and the presence of open (meson-meson) channels plays an essential role. In ch. 4 the unitarized model is applied to light scalar meson resonances. In this regime the contribution of the open channels is considerable. It is demonstrated that the model parameters as used for the description of the pseudo-scalar and vector mesons, unchanged can be used for the description of these mesons. Ch. 5 treats the color-Coulomb interaction. There the effect of the Coulomb interaction is studied in simple models without decay. The results of incorporating the color-Coulomb interaction into the full CC model are given in ch.6. Ch. 7 discusses the results of the previous chapters and the present status of the model. (author). 182 refs.; 16 figs.; 33 tabs

Item Response Theory: A Basic Concept

Science.gov (United States)

Mahmud, Jumailiyah

2017-01-01

With the development in computing technology, item response theory (IRT) develops rapidly, and has become a user friendly application in psychometrics world. Limitation in classical theory is one aspect that encourages the use of IRT. In this study, the basic concept of IRT will be discussed. In addition, it will briefly review the ability…

Single-Phase Bundle Flows Including Macroscopic Turbulence Model

Energy Technology Data Exchange (ETDEWEB)

Lee, Seung Jun; Yoon, Han Young [KAERI, Daejeon (Korea, Republic of); Yoon, Seok Jong; Cho, Hyoung Kyu [Seoul National University, Seoul (Korea, Republic of)

2016-05-15

To deal with various thermal hydraulic phenomena due to rapid change of fluid properties when an accident happens, securing mechanistic approaches as much as possible may reduce the uncertainty arising from improper applications of the experimental models. In this study, the turbulence mixing model, which is well defined in the subchannel analysis code such as VIPRE, COBRA, and MATRA by experiments, is replaced by a macroscopic k-e turbulence model, which represents the aspect of mathematical derivation. The performance of CUPID with macroscopic turbulence model is validated against several bundle experiments: CNEN 4x4 and PNL 7x7 rod bundle tests. In this study, the macroscopic k-e model has been validated for the application to subchannel analysis. It has been implemented in the CUPID code and validated against CNEN 4x4 and PNL 7x7 rod bundle tests. The results showed that the macroscopic k-e turbulence model can estimate the experiments properly.

Psychometric properties of the Global Operative Assessment of Laparoscopic Skills (GOALS) using item response theory.

Science.gov (United States)

Watanabe, Yusuke; Madani, Amin; Ito, Yoichi M; Bilgic, Elif; McKendy, Katherine M; Feldman, Liane S; Fried, Gerald M; Vassiliou, Melina C

2017-02-01

The extent to which each item assessed using the Global Operative Assessment of Laparoscopic Skills (GOALS) contributes to the total score remains unknown. The purpose of this study was to evaluate the level of difficulty and discriminative ability of each of the 5 GOALS items using item response theory (IRT). A total of 396 GOALS assessments for a variety of laparoscopic procedures over a 12-year time period were included. Threshold parameters of item difficulty and discrimination power were estimated for each item using IRT. The higher slope parameters seen with "bimanual dexterity" and "efficiency" are indicative of greater discriminative ability than "depth perception", "tissue handling", and "autonomy". IRT psychometric analysis indicates that the 5 GOALS items do not demonstrate uniform difficulty and discriminative power, suggesting that they should not be scored equally. "Bimanual dexterity" and "efficiency" seem to have stronger discrimination. Weighted scores based on these findings could improve the accuracy of assessing individual laparoscopic skills. Copyright © 2016 Elsevier Inc. All rights reserved.

Parameter Recovery for the 1-P HGLLM with Non-Normally Distributed Level-3 Residuals

Science.gov (United States)

Kara, Yusuf; Kamata, Akihito

2017-01-01

A multilevel Rasch model using a hierarchical generalized linear model is one approach to multilevel item response theory (IRT) modeling and is referred to as a one-parameter hierarchical generalized linear logistic model (1-P HGLLM). Although it has the flexibility to model nested structure of data with covariates, the model assumes the normality…

A High-Rate, Single-Crystal Model including Phase Transformations, Plastic Slip, and Twinning

Energy Technology Data Exchange (ETDEWEB)

Addessio, Francis L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Bronkhorst, Curt Allan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Bolme, Cynthia Anne [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Explosive Science and Shock Physics Division; Brown, Donald William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Materials Science and Technology Division; Cerreta, Ellen Kathleen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Materials Science and Technology Division; Lebensohn, Ricardo A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Materials Science and Technology Division; Lookman, Turab [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Luscher, Darby Jon [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Mayeur, Jason Rhea [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Morrow, Benjamin M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Materials Science and Technology Division; Rigg, Paulo A. [Washington State Univ., Pullman, WA (United States). Dept. of Physics. Inst. for Shock Physics

2016-08-09

An anisotropic, rate-­dependent, single-­crystal approach for modeling materials under the conditions of high strain rates and pressures is provided. The model includes the effects of large deformations, nonlinear elasticity, phase transformations, and plastic slip and twinning. It is envisioned that the model may be used to examine these coupled effects on the local deformation of materials that are subjected to ballistic impact or explosive loading. The model is formulated using a multiplicative decomposition of the deformation gradient. A plate impact experiment on a multi-­crystal sample of titanium was conducted. The particle velocities at the back surface of three crystal orientations relative to the direction of impact were measured. Molecular dynamics simulations were conducted to investigate the details of the high-­rate deformation and pursue issues related to the phase transformation for titanium. Simulations using the single crystal model were conducted and compared to the high-­rate experimental data for the impact loaded single crystals. The model was found to capture the features of the experiments.

Including model uncertainty in risk-informed decision making

International Nuclear Information System (INIS)

Reinert, Joshua M.; Apostolakis, George E.

2006-01-01

Model uncertainties can have a significant impact on decisions regarding licensing basis changes. We present a methodology to identify basic events in the risk assessment that have the potential to change the decision and are known to have significant model uncertainties. Because we work with basic event probabilities, this methodology is not appropriate for analyzing uncertainties that cause a structural change to the model, such as success criteria. We use the risk achievement worth (RAW) importance measure with respect to both the core damage frequency (CDF) and the change in core damage frequency (ΔCDF) to identify potentially important basic events. We cross-check these with generically important model uncertainties. Then, sensitivity analysis is performed on the basic event probabilities, which are used as a proxy for the model parameters, to determine how much error in these probabilities would need to be present in order to impact the decision. A previously submitted licensing basis change is used as a case study. Analysis using the SAPHIRE program identifies 20 basic events as important, four of which have model uncertainties that have been identified in the literature as generally important. The decision is fairly insensitive to uncertainties in these basic events. In three of these cases, one would need to show that model uncertainties would lead to basic event probabilities that would be between two and four orders of magnitude larger than modeled in the risk assessment before they would become important to the decision. More detailed analysis would be required to determine whether these higher probabilities are reasonable. Methods to perform this analysis from the literature are reviewed and an example is demonstrated using the case study

Treatment and technical intervention time analysis of a robotic stereotactic radiotherapy system.

Science.gov (United States)

Crop, F; Lacornerie, T; Szymczak, H; Felin, A; Bailleux, C; Mirabel, X; Lartigau, E

2014-02-01

The purpose of this study is to obtain a better operational knowledge of Stereotactic Body Radiotherapy (SBRT) treatments with CyberKnife(r). An analysis of both In-room Times (IRT) and technical interventions of 5 years of treatments was performed, during which more than 1600 patients were treated for various indications, including liver (21%), lung (29%), intracranial (13%), head and neck (11%) and prostate (7%). Technical interventions were recorded along with the time of the failure, time to the intervention, and the complexity and duration of the repair. Analyses of Time Between Failures (TBF) and Service Disrupting TBF(disr) were performed. Treatment time data and variability per indication and following different system upgrades were evaluated. Large variations of IRTs were found between indications, but also large variations for each indication. The combination of the time reduction Tool (using Iris(r)) and Improved Stop Handling was of major impact to shortening of treatment times. The first implementation of the Iris collimator alone did not lead to significantly shorter IRTs for us except during prostate treatments. This was mostly due to the addition at the same time of larger rotational compensation for prostate treatments (58 instead of 1.58). Significant differences of duration between the first fraction and following fractions of a treatment, representing the necessity of defining imaging parameters and explanation to patients, were found for liver (12 min) and lung treatments using Xsight(r) Spine (5 min). Liver and lung treatments represent the longest IRT's and involve the largest variability's in IRT. The malfunction rate of the system followed a Weibull distribution with the shape and scale parameters of 0.8 and 39.7. Mean TBF(disr) was 68 work hours. 60 to 80% of the service disrupting interventions were resolved within 30-60 min, 5% required external intervention and 30% occurred in the morning. The presented results can be applied in the

Children and adolescents' internal models of food-sharing behavior include complex evaluations of contextual factors.

Science.gov (United States)

Markovits, Henry; Benenson, Joyce F; Kramer, Donald L

2003-01-01

This study examined internal representations of food sharing in 589 children and adolescents (8-19 years of age). Questionnaires, depicting a variety of contexts in which one person was asked to share a resource with another, were used to examine participants' expectations of food-sharing behavior. Factors that were varied included the value of the resource, the relation between the two depicted actors, the quality of this relation, and gender. Results indicate that internal models of food-sharing behavior showed systematic patterns of variation, demonstrating that individuals have complex contextually based internal models at all ages, including the youngest. Examination of developmental changes in use of individual patterns is consistent with the idea that internal models reflect age-specific patterns of interactions while undergoing a process of progressive consolidation.

Calibrating the Medical Council of Canada’s Qualifying Examination Part I using an integrated item response theory framework: a comparison of models and designs

Directory of Open Access Journals (Sweden)

Andre F. De Champlain

2016-01-01

Full Text Available Purpose: The aim of this research was to compare different methods of calibrating multiple choice question (MCQ and clinical decision making (CDM components for the Medical Council of Canada’s Qualifying Examination Part I (MCCQEI based on item response theory. Methods: Our data consisted of test results from 8,213 first time applicants to MCCQEI in spring and fall 2010 and 2011 test administrations. The data set contained several thousand multiple choice items and several hundred CDM cases. Four dichotomous calibrations were run using BILOG-MG 3.0. All 3 mixed item format (dichotomous MCQ responses and polytomous CDM case scores calibrations were conducted using PARSCALE 4. Results: The 2-PL model had identical numbers of items with chi-square values at or below a Type I error rate of 0.01 (83/3,499 or 0.02. In all 3 polytomous models, whether the MCQs were either anchored or concurrently run with the CDM cases, results suggest very poor fit. All IRT abilities estimated from dichotomous calibration designs correlated very highly with each other. IRT-based pass-fail rates were extremely similar, not only across calibration designs and methods, but also with regard to the actual reported decision to candidates. The largest difference noted in pass rates was 4.78%, which occurred between the mixed format concurrent 2-PL graded response model (pass rate= 80.43% and the dichotomous anchored 1-PL calibrations (pass rate= 85.21%. Conclusion: Simpler calibration designs with dichotomized items should be implemented. The dichotomous calibrations provided better fit of the item response matrix than more complex, polytomous calibrations.

Using classical test theory, item response theory, and Rasch measurement theory to evaluate patient-reported outcome measures: a comparison of worked examples.

Science.gov (United States)

Petrillo, Jennifer; Cano, Stefan J; McLeod, Lori D; Coon, Cheryl D

2015-01-01

To provide comparisons and a worked example of item- and scale-level evaluations based on three psychometric methods used in patient-reported outcome development-classical test theory (CTT), item response theory (IRT), and Rasch measurement theory (RMT)-in an analysis of the National Eye Institute Visual Functioning Questionnaire (VFQ-25). Baseline VFQ-25 data from 240 participants with diabetic macular edema from a randomized, double-masked, multicenter clinical trial were used to evaluate the VFQ at the total score level. CTT, RMT, and IRT evaluations were conducted, and results were assessed in a head-to-head comparison. Results were similar across the three methods, with IRT and RMT providing more detailed diagnostic information on how to improve the scale. CTT led to the identification of two problematic items that threaten the validity of the overall scale score, sets of redundant items, and skewed response categories. IRT and RMT additionally identified poor fit for one item, many locally dependent items, poor targeting, and disordering of over half the response categories. Selection of a psychometric approach depends on many factors. Researchers should justify their evaluation method and consider the intended audience. If the instrument is being developed for descriptive purposes and on a restricted budget, a cursory examination of the CTT-based psychometric properties may be all that is possible. In a high-stakes situation, such as the development of a patient-reported outcome instrument for consideration in pharmaceutical labeling, however, a thorough psychometric evaluation including IRT or RMT should be considered, with final item-level decisions made on the basis of both quantitative and qualitative results. Copyright © 2015. Published by Elsevier Inc.

Mokken scale analysis : Between the Guttman scale and parametric item response theory

NARCIS (Netherlands)

van Schuur, Wijbrandt H.

2003-01-01

This article introduces a model of ordinal unidimensional measurement known as Mokken scale analysis. Mokken scaling is based on principles of Item Response Theory (IRT) that originated in the Guttman scale. I compare the Mokken model with both Classical Test Theory (reliability or factor analysis)

The SlZRT1 Gene Encodes a Plasma Membrane-Located ZIP (Zrt-, Irt-Like Protein Transporter in the Ectomycorrhizal Fungus Suillus luteus

Directory of Open Access Journals (Sweden)

Laura Coninx

2017-11-01

Full Text Available Zinc (Zn is an essential micronutrient but may become toxic when present in excess. In Zn-contaminated environments, trees can be protected from Zn toxicity by their root-associated micro-organisms, in particular ectomycorrhizal fungi. The mechanisms of cellular Zn homeostasis in ectomycorrhizal fungi and their contribution to the host tree’s Zn status are however not yet fully understood. The aim of this study was to identify and characterize transporters involved in Zn uptake in the ectomycorrhizal fungus Suillus luteus, a cosmopolitan pine mycobiont. Zn uptake in fungi is known to be predominantly governed by members of the ZIP (Zrt/IrtT-like protein family of Zn transporters. Four ZIP transporter encoding genes were identified in the S. luteus genome. By in silico and phylogenetic analysis, one of these proteins, SlZRT1, was predicted to be a plasma membrane located Zn importer. Heterologous expression in yeast confirmed the predicted function and localization of the protein. A gene expression analysis via RT-qPCR was performed in S. luteus to establish whether SlZRT1 expression is affected by external Zn concentrations. SlZRT1 transcripts accumulated almost immediately, though transiently upon growth in the absence of Zn. Exposure to elevated concentrations of Zn resulted in a significant reduction of SlZRT1 transcripts within the first hour after initiation of the exposure. Altogether, the data support a role as cellular Zn importer for SlZRT1 and indicate a key role in cellular Zn uptake of S. luteus. Further research is needed to understand the eventual contribution of SlZRT1 to the Zn status of the host plant.

The SlZRT1 Gene Encodes a Plasma Membrane-Located ZIP (Zrt-, Irt-Like Protein) Transporter in the Ectomycorrhizal Fungus Suillus luteus.

Science.gov (United States)

Coninx, Laura; Thoonen, Anneleen; Slenders, Eli; Morin, Emmanuelle; Arnauts, Natascha; Op De Beeck, Michiel; Kohler, Annegret; Ruytinx, Joske; Colpaert, Jan V

2017-01-01

Zinc (Zn) is an essential micronutrient but may become toxic when present in excess. In Zn-contaminated environments, trees can be protected from Zn toxicity by their root-associated micro-organisms, in particular ectomycorrhizal fungi. The mechanisms of cellular Zn homeostasis in ectomycorrhizal fungi and their contribution to the host tree's Zn status are however not yet fully understood. The aim of this study was to identify and characterize transporters involved in Zn uptake in the ectomycorrhizal fungus Suillus luteus , a cosmopolitan pine mycobiont. Zn uptake in fungi is known to be predominantly governed by members of the ZIP (Zrt/IrtT-like protein) family of Zn transporters. Four ZIP transporter encoding genes were identified in the S. luteus genome. By in silico and phylogenetic analysis, one of these proteins, SlZRT1, was predicted to be a plasma membrane located Zn importer. Heterologous expression in yeast confirmed the predicted function and localization of the protein. A gene expression analysis via RT-qPCR was performed in S. luteus to establish whether SlZRT1 expression is affected by external Zn concentrations. SlZRT1 transcripts accumulated almost immediately, though transiently upon growth in the absence of Zn. Exposure to elevated concentrations of Zn resulted in a significant reduction of SlZRT1 transcripts within the first hour after initiation of the exposure. Altogether, the data support a role as cellular Zn importer for SlZRT1 and indicate a key role in cellular Zn uptake of S. luteus . Further research is needed to understand the eventual contribution of SlZRT1 to the Zn status of the host plant.

The Watts-Strogatz network model developed by including degree distribution: theory and computer simulation

Energy Technology Data Exchange (ETDEWEB)

Chen, Y W [Surface Physics Laboratory and Department of Physics, Fudan University, Shanghai 200433 (China); Zhang, L F [Surface Physics Laboratory and Department of Physics, Fudan University, Shanghai 200433 (China); Huang, J P [Surface Physics Laboratory and Department of Physics, Fudan University, Shanghai 200433 (China)

2007-07-20

By using theoretical analysis and computer simulations, we develop the Watts-Strogatz network model by including degree distribution, in an attempt to improve the comparison between characteristic path lengths and clustering coefficients predicted by the original Watts-Strogatz network model and those of the real networks with the small-world property. Good agreement between the predictions of the theoretical analysis and those of the computer simulations has been shown. It is found that the developed Watts-Strogatz network model can fit the real small-world networks more satisfactorily. Some other interesting results are also reported by adjusting the parameters in a model degree-distribution function. The developed Watts-Strogatz network model is expected to help in the future analysis of various social problems as well as financial markets with the small-world property.

The Watts-Strogatz network model developed by including degree distribution: theory and computer simulation

International Nuclear Information System (INIS)

Chen, Y W; Zhang, L F; Huang, J P

2007-01-01

By using theoretical analysis and computer simulations, we develop the Watts-Strogatz network model by including degree distribution, in an attempt to improve the comparison between characteristic path lengths and clustering coefficients predicted by the original Watts-Strogatz network model and those of the real networks with the small-world property. Good agreement between the predictions of the theoretical analysis and those of the computer simulations has been shown. It is found that the developed Watts-Strogatz network model can fit the real small-world networks more satisfactorily. Some other interesting results are also reported by adjusting the parameters in a model degree-distribution function. The developed Watts-Strogatz network model is expected to help in the future analysis of various social problems as well as financial markets with the small-world property

The Benefits of Including Clinical Factors in Rectal Normal Tissue Complication Probability Modeling After Radiotherapy for Prostate Cancer

International Nuclear Information System (INIS)

Defraene, Gilles; Van den Bergh, Laura; Al-Mamgani, Abrahim; Haustermans, Karin; Heemsbergen, Wilma; Van den Heuvel, Frank; Lebesque, Joos V.

2012-01-01

Purpose: To study the impact of clinical predisposing factors on rectal normal tissue complication probability modeling using the updated results of the Dutch prostate dose-escalation trial. Methods and Materials: Toxicity data of 512 patients (conformally treated to 68 Gy [n = 284] and 78 Gy [n = 228]) with complete follow-up at 3 years after radiotherapy were studied. Scored end points were rectal bleeding, high stool frequency, and fecal incontinence. Two traditional dose-based models (Lyman-Kutcher-Burman (LKB) and Relative Seriality (RS) and a logistic model were fitted using a maximum likelihood approach. Furthermore, these model fits were improved by including the most significant clinical factors. The area under the receiver operating characteristic curve (AUC) was used to compare the discriminating ability of all fits. Results: Including clinical factors significantly increased the predictive power of the models for all end points. In the optimal LKB, RS, and logistic models for rectal bleeding and fecal incontinence, the first significant (p = 0.011–0.013) clinical factor was “previous abdominal surgery.” As second significant (p = 0.012–0.016) factor, “cardiac history” was included in all three rectal bleeding fits, whereas including “diabetes” was significant (p = 0.039–0.048) in fecal incontinence modeling but only in the LKB and logistic models. High stool frequency fits only benefitted significantly (p = 0.003–0.006) from the inclusion of the baseline toxicity score. For all models rectal bleeding fits had the highest AUC (0.77) where it was 0.63 and 0.68 for high stool frequency and fecal incontinence, respectively. LKB and logistic model fits resulted in similar values for the volume parameter. The steepness parameter was somewhat higher in the logistic model, also resulting in a slightly lower D 50 . Anal wall DVHs were used for fecal incontinence, whereas anorectal wall dose best described the other two endpoints. Conclusions

The Benefits of Including Clinical Factors in Rectal Normal Tissue Complication Probability Modeling After Radiotherapy for Prostate Cancer

Energy Technology Data Exchange (ETDEWEB)

Defraene, Gilles, E-mail: gilles.defraene@uzleuven.be [Radiation Oncology Department, University Hospitals Leuven, Leuven (Belgium); Van den Bergh, Laura [Radiation Oncology Department, University Hospitals Leuven, Leuven (Belgium); Al-Mamgani, Abrahim [Department of Radiation Oncology, Erasmus Medical Center - Daniel den Hoed Cancer Center, Rotterdam (Netherlands); Haustermans, Karin [Radiation Oncology Department, University Hospitals Leuven, Leuven (Belgium); Heemsbergen, Wilma [Netherlands Cancer Institute - Antoni van Leeuwenhoek Hospital, Amsterdam (Netherlands); Van den Heuvel, Frank [Radiation Oncology Department, University Hospitals Leuven, Leuven (Belgium); Lebesque, Joos V. [Netherlands Cancer Institute - Antoni van Leeuwenhoek Hospital, Amsterdam (Netherlands)

2012-03-01

Purpose: To study the impact of clinical predisposing factors on rectal normal tissue complication probability modeling using the updated results of the Dutch prostate dose-escalation trial. Methods and Materials: Toxicity data of 512 patients (conformally treated to 68 Gy [n = 284] and 78 Gy [n = 228]) with complete follow-up at 3 years after radiotherapy were studied. Scored end points were rectal bleeding, high stool frequency, and fecal incontinence. Two traditional dose-based models (Lyman-Kutcher-Burman (LKB) and Relative Seriality (RS) and a logistic model were fitted using a maximum likelihood approach. Furthermore, these model fits were improved by including the most significant clinical factors. The area under the receiver operating characteristic curve (AUC) was used to compare the discriminating ability of all fits. Results: Including clinical factors significantly increased the predictive power of the models for all end points. In the optimal LKB, RS, and logistic models for rectal bleeding and fecal incontinence, the first significant (p = 0.011-0.013) clinical factor was 'previous abdominal surgery.' As second significant (p = 0.012-0.016) factor, 'cardiac history' was included in all three rectal bleeding fits, whereas including 'diabetes' was significant (p = 0.039-0.048) in fecal incontinence modeling but only in the LKB and logistic models. High stool frequency fits only benefitted significantly (p = 0.003-0.006) from the inclusion of the baseline toxicity score. For all models rectal bleeding fits had the highest AUC (0.77) where it was 0.63 and 0.68 for high stool frequency and fecal incontinence, respectively. LKB and logistic model fits resulted in similar values for the volume parameter. The steepness parameter was somewhat higher in the logistic model, also resulting in a slightly lower D{sub 50}. Anal wall DVHs were used for fecal incontinence, whereas anorectal wall dose best described the other two endpoints

An imprecise Dirichlet model for Bayesian analysis of failure data including right-censored observations

International Nuclear Information System (INIS)

Coolen, F.P.A.

1997-01-01

This paper is intended to make researchers in reliability theory aware of a recently introduced Bayesian model with imprecise prior distributions for statistical inference on failure data, that can also be considered as a robust Bayesian model. The model consists of a multinomial distribution with Dirichlet priors, making the approach basically nonparametric. New results for the model are presented, related to right-censored observations, where estimation based on this model is closely related to the product-limit estimator, which is an important statistical method to deal with reliability or survival data including right-censored observations. As for the product-limit estimator, the model considered in this paper aims at not using any information other than that provided by observed data, but our model fits into the robust Bayesian context which has the advantage that all inferences can be based on probabilities or expectations, or bounds for probabilities or expectations. The model uses a finite partition of the time-axis, and as such it is also related to life-tables

Analysis of electronic models for solar cells including energy resolved defect densities

Energy Technology Data Exchange (ETDEWEB)

Glitzky, Annegret

2010-07-01

We introduce an electronic model for solar cells including energy resolved defect densities. The resulting drift-diffusion model corresponds to a generalized van Roosbroeck system with additional source terms coupled with ODEs containing space and energy as parameters for all defect densities. The system has to be considered in heterostructures and with mixed boundary conditions from device simulation. We give a weak formulation of the problem. If the boundary data and the sources are compatible with thermodynamic equilibrium the free energy along solutions decays monotonously. In other cases it may be increasing, but we estimate its growth. We establish boundedness and uniqueness results and prove the existence of a weak solution. This is done by considering a regularized problem, showing its solvability and the boundedness of its solutions independent of the regularization level. (orig.)

Some Effects of a Modified Workweek

Science.gov (United States)

Wood, Jack M.

1977-01-01

Reports on a study that included examination of the degree of change in selected aspects of job satisfaction and organizational performance after the organization adopted a form of modified workweek. (Author/IRT)

Low Cost Benefit Suggestions.

Science.gov (United States)

Doyel, Hoyt W.; McMillan, John D.

1980-01-01

Outlines eight low-cost employee benefits and summarizes their relative advantages. The eight include a stock ownership program, a sick leave pool, flexible working hours, production incentives, and group purchase plans. (IRT)

Mathematical Model of Two Phase Flow in Natural Draft Wet-Cooling Tower Including Flue Gas Injection

Directory of Open Access Journals (Sweden)

Hyhlík Tomáš

2016-01-01

Full Text Available The previously developed model of natural draft wet-cooling tower flow, heat and mass transfer is extended to be able to take into account the flow of supersaturated moist air. The two phase flow model is based on void fraction of gas phase which is included in the governing equations. Homogeneous equilibrium model, where the two phases are well mixed and have the same velocity, is used. The effect of flue gas injection is included into the developed mathematical model by using source terms in governing equations and by using momentum flux coefficient and kinetic energy flux coefficient. Heat and mass transfer in the fill zone is described by the system of ordinary differential equations, where the mass transfer is represented by measured fill Merkel number and heat transfer is calculated using prescribed Lewis factor.

Detection of differential item functioning using Lagrange multiplier tests

NARCIS (Netherlands)

Glas, Cornelis A.W.

1998-01-01

Abstract: In the present paper it is shown that differential item functioning can be evaluated using the Lagrange multiplier test or Rao’s efficient score test. The test is presented in the framework of a number of IRT models such as the Rasch model, the OPLM, the 2-parameter logistic model, the

Detection of differential item functioning using Lagrange multiplier tests

NARCIS (Netherlands)

Glas, Cornelis A.W.

1996-01-01

In this paper it is shown that differential item functioning can be evaluated using the Lagrange multiplier test or C. R. Rao's efficient score test. The test is presented in the framework of a number of item response theory (IRT) models such as the Rasch model, the one-parameter logistic model, the

Using Item Response Theory to Evaluate LSCI Learning Gains

Science.gov (United States)

Schlingman, Wayne M.; Prather, E. E.; Collaboration of Astronomy Teaching Scholars CATS

2012-01-01

Analyzing the data from the recent national study using the Light and Spectroscopy Concept Inventory (LSCI), this project uses Item Response Theory (IRT) to investigate the learning gains of students as measured by the LSCI. IRT provides a theoretical model to generate parameters accounting for students’ abilities. We use IRT to measure changes in students’ abilities to reason about light from pre- to post-instruction. Changes in students’ abilities are compared by classroom to better understand the learning that is taking place in classrooms across the country. We compare the average change in ability for each classroom to the Interactivity Assessment Score (IAS) to provide further insight into the prior results presented from this data set. This material is based upon work supported by the National Science Foundation under Grant No. 0715517, a CCLI Phase III Grant for the Collaboration of Astronomy Teaching Scholars (CATS). Any opinions, findings, and conclusions or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of the National Science Foundation.

Proposition 13 and the Future of California's Schools

Science.gov (United States)

Guthrie, James W.

1978-01-01

Describes the California legislature's education-related response to Proposition 13 and analyzes the likely long-range effects of that response--including its effect on revenue stability, expenditure equality, and school governance. (Author/IRT)

Psychometric evaluation of an item bank for computerized adaptive testing of the EORTC QLQ-C30 cognitive functioning dimension in cancer patients.

Science.gov (United States)

Dirven, Linda; Groenvold, Mogens; Taphoorn, Martin J B; Conroy, Thierry; Tomaszewski, Krzysztof A; Young, Teresa; Petersen, Morten Aa

2017-11-01

The European Organisation of Research and Treatment of Cancer (EORTC) Quality of Life Group is developing computerized adaptive testing (CAT) versions of all EORTC Quality of Life Questionnaire (QLQ-C30) scales with the aim to enhance measurement precision. Here we present the results on the field-testing and psychometric evaluation of the item bank for cognitive functioning (CF). In previous phases (I-III), 44 candidate items were developed measuring CF in cancer patients. In phase IV, these items were psychometrically evaluated in a large sample of international cancer patients. This evaluation included an assessment of dimensionality, fit to the item response theory (IRT) model, differential item functioning (DIF), and measurement properties. A total of 1030 cancer patients completed the 44 candidate items on CF. Of these, 34 items could be included in a unidimensional IRT model, showing an acceptable fit. Although several items showed DIF, these had a negligible impact on CF estimation. Measurement precision of the item bank was much higher than the two original QLQ-C30 CF items alone, across the whole continuum. Moreover, CAT measurement may on average reduce study sample sizes with about 35-40% compared to the original QLQ-C30 CF scale, without loss of power. A CF item bank for CAT measurement consisting of 34 items was established, applicable to various cancer patients across countries. This CAT measurement system will facilitate precise and efficient assessment of HRQOL of cancer patients, without loss of comparability of results.

A Design for the Evaluation of Management Information Systems.

Science.gov (United States)

Spuck, Dennis W.; Bozeman, William C.

1980-01-01

This paper has presented a model for the evaluation of management information systems. The three levels of information considered were actual, perceptual, and attitudinal. The dimensions of evaluation discussed were function, utilization, and effects. (Author/IRT)

Fluid-structure interaction including volumetric coupling with homogenised subdomains for modeling respiratory mechanics.

Science.gov (United States)

Yoshihara, Lena; Roth, Christian J; Wall, Wolfgang A

2017-04-01

In this article, a novel approach is presented for combining standard fluid-structure interaction with additional volumetric constraints to model fluid flow into and from homogenised solid domains. The proposed algorithm is particularly interesting for investigations in the field of respiratory mechanics as it enables the mutual coupling of airflow in the conducting part and local tissue deformation in the respiratory part of the lung by means of a volume constraint. In combination with a classical monolithic fluid-structure interaction approach, a comprehensive model of the human lung can be established that will be useful to gain new insights into respiratory mechanics in health and disease. To illustrate the validity and versatility of the novel approach, three numerical examples including a patient-specific lung model are presented. The proposed algorithm proves its capability of computing clinically relevant airflow distribution and tissue strain data at a level of detail that is not yet achievable, neither with current imaging techniques nor with existing computational models. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Global stability for infectious disease models that include immigration of infected individuals and delay in the incidence

Directory of Open Access Journals (Sweden)

Chelsea Uggenti

2018-03-01

Full Text Available We begin with a detailed study of a delayed SI model of disease transmission with immigration into both classes. The incidence function allows for a nonlinear dependence on the infected population, including mass action and saturating incidence as special cases. Due to the immigration of infectives, there is no disease-free equilibrium and hence no basic reproduction number. We show there is a unique endemic equilibrium and that this equilibrium is globally asymptotically stable for all parameter values. The results include vector-style delay and latency-style delay. Next, we show that previous global stability results for an SEI model and an SVI model that include immigration of infectives and non-linear incidence but not delay can be extended to systems with vector-style delay and latency-style delay.

Splicing factor SR34b mutation reduces cadmium tolerance in Arabidopsis by regulating iron-regulated transporter 1 gene

International Nuclear Information System (INIS)

Zhang, Wentao; Du, Bojing; Liu, Di; Qi, Xiaoting

2014-01-01

Highlights: • Arabidopsis splicing factor SR34b gene is cadmium-inducible. • SR34b T-DNA insertion mutant is sensitive to cadmium due to high cadmium uptake. • SR34b is a regulator of cadmium transporter IRT1 at the posttranscription level. • These results highlight the roles of splicing factors in cadmium tolerance of plant. - Abstract: Serine/arginine-rich (SR) proteins are important splicing factors. However, the biological functions of plant SR proteins remain unclear especially in abiotic stresses. Cadmium (Cd) is a non-essential element that negatively affects plant growth and development. In this study, we provided clear evidence for SR gene involved in Cd tolerance in planta. Systemic expression analysis of 17 Arabidopsis SR genes revealed that SR34b is the only SR gene upregulated by Cd, suggesting its potential roles in Arabidopsis Cd tolerance. Consistent with this, a SR34b T-DNA insertion mutant (sr34b) was moderately sensitive to Cd, which had higher Cd 2+ uptake rate and accumulated Cd in greater amounts than wild-type. This was due to the altered expression of iron-regulated transporter 1 (IRT1) gene in sr34b mutant. Under normal growth conditions, IRT1 mRNAs highly accumulated in sr34b mutant, which was a result of increased stability of IRT1 mRNA. Under Cd stress, however, sr34b mutant plants had a splicing defect in IRT1 gene, thus reducing the IRT1 mRNA accumulation. Despite of this, sr34b mutant plants still constitutively expressed IRT1 proteins under Cd stress, thereby resulting in Cd stress-sensitive phenotype. We therefore propose the essential roles of SR34b in posttranscriptional regulation of IRT1 expression and identify it as a regulator of Arabidopsis Cd tolerance

Splicing factor SR34b mutation reduces cadmium tolerance in Arabidopsis by regulating iron-regulated transporter 1 gene

Energy Technology Data Exchange (ETDEWEB)

Zhang, Wentao; Du, Bojing; Liu, Di; Qi, Xiaoting, E-mail: qixiaoting@cnu.edu.cn

2014-12-12

Highlights: • Arabidopsis splicing factor SR34b gene is cadmium-inducible. • SR34b T-DNA insertion mutant is sensitive to cadmium due to high cadmium uptake. • SR34b is a regulator of cadmium transporter IRT1 at the posttranscription level. • These results highlight the roles of splicing factors in cadmium tolerance of plant. - Abstract: Serine/arginine-rich (SR) proteins are important splicing factors. However, the biological functions of plant SR proteins remain unclear especially in abiotic stresses. Cadmium (Cd) is a non-essential element that negatively affects plant growth and development. In this study, we provided clear evidence for SR gene involved in Cd tolerance in planta. Systemic expression analysis of 17 Arabidopsis SR genes revealed that SR34b is the only SR gene upregulated by Cd, suggesting its potential roles in Arabidopsis Cd tolerance. Consistent with this, a SR34b T-DNA insertion mutant (sr34b) was moderately sensitive to Cd, which had higher Cd{sup 2+} uptake rate and accumulated Cd in greater amounts than wild-type. This was due to the altered expression of iron-regulated transporter 1 (IRT1) gene in sr34b mutant. Under normal growth conditions, IRT1 mRNAs highly accumulated in sr34b mutant, which was a result of increased stability of IRT1 mRNA. Under Cd stress, however, sr34b mutant plants had a splicing defect in IRT1 gene, thus reducing the IRT1 mRNA accumulation. Despite of this, sr34b mutant plants still constitutively expressed IRT1 proteins under Cd stress, thereby resulting in Cd stress-sensitive phenotype. We therefore propose the essential roles of SR34b in posttranscriptional regulation of IRT1 expression and identify it as a regulator of Arabidopsis Cd tolerance.

Automatic control study of the icing research tunnel refrigeration system

Science.gov (United States)

Kieffer, Arthur W.; Soeder, Ronald H.

1991-01-01

The Icing Research Tunnel (IRT) at the NASA Lewis Research Center is a subsonic, closed-return atmospheric tunnel. The tunnel includes a heat exchanger and a refrigeration plant to achieve the desired air temperature and a spray system to generate the type of icing conditions that would be encountered by aircraft. At the present time, the tunnel air temperature is controlled by manual adjustment of freon refrigerant flow control valves. An upgrade of this facility calls for these control valves to be adjusted by an automatic controller. The digital computer simulation of the IRT refrigeration plant and the automatic controller that was used in the simulation are discussed.

Educational Investment, Family Context, and Children's Math and Reading Growth from Kindergarten through the Third Grade

Science.gov (United States)

Cheadle, Jacob E.

2008-01-01

Drawing on longitudinal data from the Early Childhood Longitudinal Study, Kindergarten Class of 1998-1999, this study used IRT modeling to operationalize a measure of parental educational investments based on Lareau's notion of concerted cultivation. It used multilevel piece-wise growth models regressing children's math and reading achievement…

Modeling of the dynamics of wind to power conversion including high wind speed behavior

DEFF Research Database (Denmark)

Litong-Palima, Marisciel; Bjerge, Martin Huus; Cutululis, Nicolaos Antonio

2016-01-01

This paper proposes and validates an efficient, generic and computationally simple dynamic model for the conversion of the wind speed at hub height into the electrical power by a wind turbine. This proposed wind turbine model was developed as a first step to simulate wind power time series...... for power system studies. This paper focuses on describing and validating the single wind turbine model, and is therefore neither describing wind speed modeling nor aggregation of contributions from a whole wind farm or a power system area. The state-of-the-art is to use static power curves for the purpose...... of power system studies, but the idea of the proposed wind turbine model is to include the main dynamic effects in order to have a better representation of the fluctuations in the output power and of the fast power ramping especially because of high wind speed shutdowns of the wind turbine. The high wind...

Integrated radwaste treatment system. Final report

International Nuclear Information System (INIS)

Baker, M.N.; Houston, H.M.

1997-10-01

In May 1988, the West Valley Demonstration Project (WVDP) began pretreating liquid high-level radioactive waste (HLW). This HLW was produced during spent nuclear fuel reprocessing operations that took place at the Western New York Nuclear Service Center from 1966 to 1972. Original reprocessing operations used plutonium/uranium extraction (PUREX) and thorium extraction (THOREX) processes to recover usable isotopes from spent nuclear fuel. The PUREX process produced a nitric acid-based waste stream, which was neutralized by adding sodium hydroxide to it. About two million liters of alkaline liquid HLW produced from PUREX neutralization were stored in an underground carbon steel tank identified as Tank 8D-2. The THOREX process, which was used to reprocess one core of mixed uranium-thorium fuel, resulted in about 31,000 liters of acidic waste. This acidic HLW was stored in an underground stainless steel tank identified as Tank 8D-4. Pretreatment of the HLW was carried out using the Integrated Radwaste Treatment System (IRTS), from May 1988 until May 1995. This system was designed to decontaminate the liquid HLW, remove salts from it, and encapsulate the resulting waste into a cement waste form that achieved US Nuclear Regulatory Commission (NRC) criteria for low-level waste (LLW) storage and disposal. A thorough discussion of IRTS operations, including all systems, subsystems, and components, is presented in US Department of Energy (DOE) Topical Report (DOE/NE/44139-68), Integrated Radwaste Treatment System Lessons Learned from 2 1/2 Years of Operation. This document also presents a detailed discussion of lessons learned during the first 2 1/2 years of IRTS operation. This report provides a general discussion of all phases of IRTS operation, and presents additional lessons learned during seven years of IRTS operation

Modelling and control of a microgrid including photovoltaic and wind generation

Science.gov (United States)

Hussain, Mohammed Touseef

Extensive increase of distributed generation (DG) penetration and the existence of multiple DG units at distribution level have introduced the notion of micro-grid. This thesis develops a detailed non-linear and small-signal dynamic model of a microgrid that includes PV, wind and conventional small scale generation along with their power electronics interfaces and the filters. The models developed evaluate the amount of generation mix from various DGs for satisfactory steady state operation of the microgrid. In order to understand the interaction of the DGs on microgrid system initially two simpler configurations were considered. The first one consists of microalternator, PV and their electronics, and the second system consists of microalternator and wind system each connected to the power system grid. Nonlinear and linear state space model of each microgrid are developed. Small signal analysis showed that the large participation of PV/wind can drive the microgrid to the brink of unstable region without adequate control. Non-linear simulations are carried out to verify the results obtained through small-signal analysis. The role of the extent of generation mix of a composite microgrid consisting of wind, PV and conventional generation was investigated next. The findings of the smaller systems were verified through nonlinear and small signal modeling. A central supervisory capacitor energy storage controller interfaced through a STATCOM was proposed to monitor and enhance the microgrid operation. The potential of various control inputs to provide additional damping to the system has been evaluated through decomposition techniques. The signals identified to have damping contents were employed to design the supervisory control system. The controller gains were tuned through an optimal pole placement technique. Simulation studies demonstrate that the STATCOM voltage phase angle and PV inverter phase angle were the best inputs for enhanced stability boundaries.

Importance of including small-scale tile drain discharge in the calibration of a coupled groundwater-surface water catchment model

DEFF Research Database (Denmark)

Hansen, Anne Lausten; Refsgaard, Jens Christian; Christensen, Britt Stenhøj Baun

2013-01-01

the catchment. In this study, a coupled groundwater-surface water model based on the MIKE SHE code was developed for the 4.7 km2 Lillebæk catchment in Denmark, where tile drain flow is a major contributor to the stream discharge. The catchment model was calibrated in several steps by incrementally including...... the observation data into the calibration to see the effect on model performance of including diverse data types, especially tile drain discharge. For the Lillebæk catchment, measurements of hydraulic head, daily stream discharge, and daily tile drain discharge from five small (1–4 ha) drainage areas exist....... The results showed that including tile drain data in the calibration of the catchment model improved its general performance for hydraulic heads and stream discharges. However, the model failed to correctly describe the local-scale dynamics of the tile drain discharges, and, furthermore, including the drain...

Medical applications of infrared thermography: A review

Science.gov (United States)

Lahiri, B. B.; Bagavathiappan, S.; Jayakumar, T.; Philip, John

2012-07-01

Abnormal body temperature is a natural indicator of illness. Infrared thermography (IRT) is a fast, passive, non-contact and non-invasive alternative to conventional clinical thermometers for monitoring body temperature. Besides, IRT can also map body surface temperature remotely. Last five decades witnessed a steady increase in the utility of thermal imaging cameras to obtain correlations between the thermal physiology and skin temperature. IRT has been successfully used in diagnosis of breast cancer, diabetes neuropathy and peripheral vascular disorders. It has also been used to detect problems associated with gynecology, kidney transplantation, dermatology, heart, neonatal physiology, fever screening and brain imaging. With the advent of modern infrared cameras, data acquisition and processing techniques, it is now possible to have real time high resolution thermographic images, which is likely to surge further research in this field. The present efforts are focused on automatic analysis of temperature distribution of regions of interest and their statistical analysis for detection of abnormalities. This critical review focuses on advances in the area of medical IRT. The basics of IRT, essential theoretical background, the procedures adopted for various measurements and applications of IRT in various medical fields are discussed in this review. Besides background information is provided for beginners for better understanding of the subject.

Bombesin-stimulated serum immunoreactive trypsin in the different diagnosis between endocrine and exocrine tumors of the pancreas

International Nuclear Information System (INIS)

Bonora, G.; De Giorgio, R.; Toni, R.; Fanti, M.P.; Cariani, G.; Vezzadini, P.

1987-01-01

Bombesin administration was recently found to induce a marked increase in circulating immunoreactive trypsin (IRT), whose magnitude seems to reflect the functional capacity of pancreatic acinar cell mass. The purpose of the present study was to assess the effect of bombesin infusion on serum IRT concentration in patients with endocrine or exocrine tumors of the pancreas. Fifteen patients with pancreatic endocrine tumor, 17 patients with pancreatic exocrine carcinoma and 15 healty subjects were investigated. Serum IRT was measured by radioimmunoassay before and for 120 minutes after the start of bombesin infusion (9 ng/kg/min over 30 min). The integrated serum IRT response to bombesin administration in patients with endocrine tumor of the pancreas did not differ significantly from controls, but were significantly higher than in patients with exocrine carcinoma. In the latter the integrated IRT responses to bombesin infusion in patients with endocrine tumor can probably be explained by small tumor size and/or little invasion of the glandular parenchyma, resulting in an undetectable impairment of exocrine pancreatic function. The very low IRT responses in patients with exocrine carcinoma could reflect the presence of severe pancreatic damage. The results suggest that this newly proposed bombesin test may be useful in the preoperative differential diagnosis between endocrine and exocrine tumors of the pancreas

Development of realistic concrete models including scaling effects

International Nuclear Information System (INIS)

Carpinteri, A.

1989-09-01

Progressive cracking in structural elements of concrete is considered. Two simple models are applied, which, even though different, lead to similar predictions for the fracture behaviour. Both Virtual Crack Propagation Model and Cohesive Limit Analysis (Section 2), show a trend towards brittle behaviour and catastrophical events for large structural sizes. A numerical Cohesive Crack Model is proposed (Section 3) to describe strain softening and strain localization in concrete. Such a model is able to predict the size effects of fracture mechanics accurately. Whereas for Mode I, only untieing of the finite element nodes is applied to simulate crack growth, for Mixed Mode a topological variation is required at each step (Section 4). In the case of the four point shear specimen, the load vs. deflection diagrams reveal snap-back instability for large sizes. By increasing the specimen sizes, such instability tends to reproduce the classical LEFM instability. Remarkable size effects are theoretically predicted and experimentally confirmed also for reinforced concrete (Section 5). The brittleness of the flexural members increases by increasing size and/or decreasing steel content. On the basis of these results, the empirical code rules regarding the minimum amount of reinforcement could be considerably revised

Limited information estimation of the diffusion-based item response theory model for responses and response times.

Science.gov (United States)

Ranger, Jochen; Kuhn, Jörg-Tobias; Szardenings, Carsten

2016-05-01

Psychological tests are usually analysed with item response models. Recently, some alternative measurement models have been proposed that were derived from cognitive process models developed in experimental psychology. These models consider the responses but also the response times of the test takers. Two such models are the Q-diffusion model and the D-diffusion model. Both models can be calibrated with the diffIRT package of the R statistical environment via marginal maximum likelihood (MML) estimation. In this manuscript, an alternative approach to model calibration is proposed. The approach is based on weighted least squares estimation and parallels the standard estimation approach in structural equation modelling. Estimates are determined by minimizing the discrepancy between the observed and the implied covariance matrix. The estimator is simple to implement, consistent, and asymptotically normally distributed. Least squares estimation also provides a test of model fit by comparing the observed and implied covariance matrix. The estimator and the test of model fit are evaluated in a simulation study. Although parameter recovery is good, the estimator is less efficient than the MML estimator. © 2016 The British Psychological Society.

The effect of differential motivation on IRT linking

NARCIS (Netherlands)

Mittelhaëuser, M.A.; Béguin, A.A.; Sijtsma, K.

2015-01-01

The purpose of this study was to investigate whether simulated differential motivation between the stakes for operational tests and anchor items produces an invalid linking result if the Rasch model is used to link the operational tests. This was done for an external anchor design and a variation of

Investigation and modeling of the anomalous yield point phenomenon in pure tantalum

Energy Technology Data Exchange (ETDEWEB)

Colas, D. [Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 5209 CNRS, Université de Bourgogne, 9 avenue Alain Savary, BP 17870, 21078 Dijon Cedex (France); CEA Valduc, 21120 Is-sur-Tille (France); Mines ParisTech, Centre des Matériaux, CNRS, UMR 7633, BP 87, 91003 Evry Cedex (France); Finot, E. [Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 5209 CNRS, Université de Bourgogne, 9 avenue Alain Savary, BP 17870, 21078 Dijon Cedex (France); Flouriot, S. [CEA Valduc, 21120 Is-sur-Tille (France); Forest, S. [Mines ParisTech, Centre des Matériaux, CNRS, UMR 7633, BP 87, 91003 Evry Cedex (France); Mazière, M., E-mail: matthieu.maziere@mines-paristech.fr [Mines ParisTech, Centre des Matériaux, CNRS, UMR 7633, BP 87, 91003 Evry Cedex (France); Paris, T. [CEA Valduc, 21120 Is-sur-Tille (France)

2014-10-06

The monotonic and cyclic behavior of commercially pure tantalum has been investigated at room temperature, in order to capture and understand the occurrence of the anomalous yield point phenomenon. Interrupted tests have been performed, with strain reversals (tensile or compressive loading) after an aging period. The stress drop is attributed to the interactions between dislocations and solute atoms (oxygen) and its macroscopic occurrence is not systematically observed. InfraRed Thermography (IRT) measurements supported by Scanning Electron Microscopy (SEM) pictures of the polished gauge length of a specimen during an interrupted tensile test reveal the nucleation and propagation of a strain localization band. The KEMC (Kubin–Estrin–McCormick) phenomenological model accounting for strain aging has been identified for several loadings and strain rates at room temperature. Simulations on full specimen using the KEMC model do not show strain localization, because of the competition between viscosity and strain localization. However, a slight misalignment of the sample can promote strain localization.

Considerations for the independent reaction times and step-by-step methods for radiation chemistry simulations

Science.gov (United States)

Plante, Ianik; Devroye, Luc

2017-10-01

Ionizing radiation interacts with the water molecules of the tissues mostly by ionizations and excitations, which result in the formation of the radiation track structure and the creation of radiolytic species such as H.,.OH, H2, H2O2, and e-aq. After their creation, these species diffuse and may chemically react with the neighboring species and with the molecules of the medium. Therefore radiation chemistry is of great importance in radiation biology. As the chemical species are not distributed homogeneously, the use of conventional models of homogeneous reactions cannot completely describe the reaction kinetics of the particles. Actually, many simulations of radiation chemistry are done using the Independent Reaction Time (IRT) method, which is a very fast technique to calculate radiochemical yields but which do not calculate the positions of the radiolytic species as a function of time. Step-by-step (SBS) methods, which are able to provide such information, have been used only sparsely because these are time-consuming in terms of calculation. Recent improvements in computer performance now allow the regular use of the SBS method in radiation chemistry. The SBS and IRT methods are both based on the Green's functions of the diffusion equation (GFDE). In this paper, several sampling algorithms of the GFDE and for the IRT method are presented. We show that the IRT and SBS methods are exactly equivalent for 2-particles systems for diffusion and partially diffusion-controlled reactions between non-interacting particles. We also show that the results obtained with the SBS simulation method with periodic boundary conditions are in agreement with the predictions by classical reaction kinetics theory, which is an important step towards using this method for modelling of biochemical networks and metabolic pathways involved in oxidative stress. Finally, the first simulation results obtained with the code RITRACKS (Relativistic Ion Tracks) are presented.

Multivariate Generalizations of Student's t-Distribution. ONR Technical Report. [Biometric Lab Report No. 90-3.

Science.gov (United States)

Gibbons, Robert D.; And Others

In the process of developing a conditionally-dependent item response theory (IRT) model, the problem arose of modeling an underlying multivariate normal (MVN) response process with general correlation among the items. Without the assumption of conditional independence, for which the underlying MVN cdf takes on comparatively simple forms and can be…

MHD model including small-scale perturbations in a plasma with temperature variations

International Nuclear Information System (INIS)

Kuvshinov, B.N.; Mikhailovskii, A.B.

1996-01-01

The possibility is studied of using a hydrodynamic model to describe a magnetized plasma with density and temperature variations on scales that are arbitrary with respect to the ion Larmor radius. It is shown that the inertial component of the transverse ion thermal flux should be taken into account. This component is found from the collisionless kinetic equation. It can also be obtained from the equations of the Grad type. A set of two-dimensional hydrodynamic equations for ions is obtained with this component taken into account. These equations are used to derive model hydrodynamic expressions for the density and temperature variations. It is shown that, for large-scale perturbations (when the wavelengths are longer than the ion Larmor radius), the expressions derived coincide with the corresponding kinetic expressions and, for perturbations on sub-Larmor scales (when the wavelengths are shorter than the Larmor radius), they agree qualitatively. Hydrodynamic dispersion relations are derived for several types of drift waves with arbitrary wavenumbers. The range of applicability of the MHD model is determined from a comparison of these dispersion relations with the kinetic ones. It is noted that, on the basis of results obtained, drift effects can be included in numerical MHD codes for studying plasma instabilities in high-temperature regimes in tokamaks

Quality of life in the Danish general population--normative data and validity of WHOQOL-BREF using Rasch and item response theory models

DEFF Research Database (Denmark)

Noerholm, V; Groenvold, M; Watt, T

2004-01-01

BACKGROUND: The main objective of this study was to investigate the construct validity of the WHOQOL-BREF by use of Rasch and Item Response Theory models and to examine the stability of the model across high/low scoring individuals, gender, education, and depressive illness. Furthermore......, the objective of the study was to estimate the reference data for the quality of life questionnaire WHOQOL-BREF in the general Danish population and in subgroups defined by age, gender, and education. METHODS: Mail-out-mail-back questionnaires were sent to a randomly selected sample of the Danish general...... population. The response rate was 68.5%, and the sample reported here contained 1101 respondents: 578 women and 519 men (four respondents did not indicate their genders). RESULTS: Each of the four domains of the WHOQOL-BREF scale fitted a two-parameter IRT model, but did not fit the Rasch model. Due...

Mathematical multi-scale model of the cardiovascular system including mitral valve dynamics. Application to ischemic mitral insufficiency

Directory of Open Access Journals (Sweden)

Moonen Marie

2011-09-01

Full Text Available Abstract Background Valve dysfunction is a common cardiovascular pathology. Despite significant clinical research, there is little formal study of how valve dysfunction affects overall circulatory dynamics. Validated models would offer the ability to better understand these dynamics and thus optimize diagnosis, as well as surgical and other interventions. Methods A cardiovascular and circulatory system (CVS model has already been validated in silico, and in several animal model studies. It accounts for valve dynamics using Heaviside functions to simulate a physiologically accurate "open on pressure, close on flow" law. However, it does not consider real-time valve opening dynamics and therefore does not fully capture valve dysfunction, particularly where the dysfunction involves partial closure. This research describes an updated version of this previous closed-loop CVS model that includes the progressive opening of the mitral valve, and is defined over the full cardiac cycle. Results Simulations of the cardiovascular system with healthy mitral valve are performed, and, the global hemodynamic behaviour is studied compared with previously validated results. The error between resulting pressure-volume (PV loops of already validated CVS model and the new CVS model that includes the progressive opening of the mitral valve is assessed and remains within typical measurement error and variability. Simulations of ischemic mitral insufficiency are also performed. Pressure-Volume loops, transmitral flow evolution and mitral valve aperture area evolution follow reported measurements in shape, amplitude and trends. Conclusions The resulting cardiovascular system model including mitral valve dynamics provides a foundation for clinical validation and the study of valvular dysfunction in vivo. The overall models and results could readily be generalised to other cardiac valves.

Application of Item Response Theory to Tests of Substance-related Associative Memory

Science.gov (United States)

Shono, Yusuke; Grenard, Jerry L.; Ames, Susan L.; Stacy, Alan W.

2015-01-01

A substance-related word association test (WAT) is one of the commonly used indirect tests of substance-related implicit associative memory and has been shown to predict substance use. This study applied an item response theory (IRT) modeling approach to evaluate psychometric properties of the alcohol- and marijuana-related WATs and their items among 775 ethnically diverse at-risk adolescents. After examining the IRT assumptions, item fit, and differential item functioning (DIF) across gender and age groups, the original 18 WAT items were reduced to 14- and 15-items in the alcohol- and marijuana-related WAT, respectively. Thereafter, unidimensional one- and two-parameter logistic models (1PL and 2PL models) were fitted to the revised WAT items. The results demonstrated that both alcohol- and marijuana-related WATs have good psychometric properties. These results were discussed in light of the framework of a unified concept of construct validity (Messick, 1975, 1989, 1995). PMID:25134051

Nonlocal continuum-based modeling of breathing mode of nanowires including surface stress and surface inertia effects

Science.gov (United States)

Ghavanloo, Esmaeal; Fazelzadeh, S. Ahmad; Rafii-Tabar, Hashem

2014-05-01

Nonlocal and surface effects significantly influence the mechanical response of nanomaterials and nanostructures. In this work, the breathing mode of a circular nanowire is studied on the basis of the nonlocal continuum model. Both the surface elastic properties and surface inertia effect are included. Nanowires can be modeled as long cylindrical solid objects. The classical model is reformulated using the nonlocal differential constitutive relations of Eringen and Gurtin-Murdoch surface continuum elasticity formalism. A new frequency equation for the breathing mode of nanowires, including small scale effect, surface stress and surface inertia is presented by employing the Bessel functions. Numerical results are computed, and are compared to confirm the validity and accuracy of the proposed method. Furthermore, the model is used to elucidate the effect of nonlocal parameter, the surface stress, the surface inertia and the nanowire orientation on the breathing mode of several types of nanowires with size ranging from 0.5 to 4 nm. Our results reveal that the combined surface and small scale effects are significant for nanowires with diameter smaller than 4 nm.

Nonlocal continuum-based modeling of breathing mode of nanowires including surface stress and surface inertia effects

International Nuclear Information System (INIS)

Ghavanloo, Esmaeal; Fazelzadeh, S. Ahmad; Rafii-Tabar, Hashem

2014-01-01

Nonlocal and surface effects significantly influence the mechanical response of nanomaterials and nanostructures. In this work, the breathing mode of a circular nanowire is studied on the basis of the nonlocal continuum model. Both the surface elastic properties and surface inertia effect are included. Nanowires can be modeled as long cylindrical solid objects. The classical model is reformulated using the nonlocal differential constitutive relations of Eringen and Gurtin–Murdoch surface continuum elasticity formalism. A new frequency equation for the breathing mode of nanowires, including small scale effect, surface stress and surface inertia is presented by employing the Bessel functions. Numerical results are computed, and are compared to confirm the validity and accuracy of the proposed method. Furthermore, the model is used to elucidate the effect of nonlocal parameter, the surface stress, the surface inertia and the nanowire orientation on the breathing mode of several types of nanowires with size ranging from 0.5 to 4 nm. Our results reveal that the combined surface and small scale effects are significant for nanowires with diameter smaller than 4 nm.

Nonlocal continuum-based modeling of breathing mode of nanowires including surface stress and surface inertia effects

Energy Technology Data Exchange (ETDEWEB)

Ghavanloo, Esmaeal, E-mail: ghavanloo@shirazu.ac.ir [School of Mechanical Engineering, Shiraz University, Shiraz 71963-16548 (Iran, Islamic Republic of); Fazelzadeh, S. Ahmad [School of Mechanical Engineering, Shiraz University, Shiraz 71963-16548 (Iran, Islamic Republic of); Rafii-Tabar, Hashem [Department of Medical Physics and Biomedical Engineering, Research Center for Medical Nanotechnology and Tissue Engineering, Shahid Beheshti University of Medical Sciences, Evin, Tehran (Iran, Islamic Republic of); Computational Physical Sciences Research Laboratory, School of Nano-Science, Institute for Research in Fundamental Sciences (IPM), Tehran (Iran, Islamic Republic of)

2014-05-01

Nonlocal and surface effects significantly influence the mechanical response of nanomaterials and nanostructures. In this work, the breathing mode of a circular nanowire is studied on the basis of the nonlocal continuum model. Both the surface elastic properties and surface inertia effect are included. Nanowires can be modeled as long cylindrical solid objects. The classical model is reformulated using the nonlocal differential constitutive relations of Eringen and Gurtin–Murdoch surface continuum elasticity formalism. A new frequency equation for the breathing mode of nanowires, including small scale effect, surface stress and surface inertia is presented by employing the Bessel functions. Numerical results are computed, and are compared to confirm the validity and accuracy of the proposed method. Furthermore, the model is used to elucidate the effect of nonlocal parameter, the surface stress, the surface inertia and the nanowire orientation on the breathing mode of several types of nanowires with size ranging from 0.5 to 4 nm. Our results reveal that the combined surface and small scale effects are significant for nanowires with diameter smaller than 4 nm.

Calibration and Validation of the Dutch-Flemish PROMIS Pain Interference Item Bank in Patients with Chronic Pain.

Science.gov (United States)

Crins, Martine H P; Roorda, Leo D; Smits, Niels; de Vet, Henrica C W; Westhovens, Rene; Cella, David; Cook, Karon F; Revicki, Dennis; van Leeuwen, Jaap; Boers, Maarten; Dekker, Joost; Terwee, Caroline B

2015-01-01

The Dutch-Flemish PROMIS Group translated the adult PROMIS Pain Interference item bank into Dutch-Flemish. The aims of the current study were to calibrate the parameters of these items using an item response theory (IRT) model, to evaluate the cross-cultural validity of the Dutch-Flemish translations compared to the original English items, and to evaluate their reliability and construct validity. The 40 items in the bank were completed by 1085 Dutch chronic pain patients. Before calibrating the items, IRT model assumptions were evaluated using confirmatory factor analysis (CFA). Items were calibrated using the graded response model (GRM), an IRT model appropriate for items with more than two response options. To evaluate cross-cultural validity, differential item functioning (DIF) for language (Dutch vs. English) was examined. Reliability was evaluated based on standard errors and Cronbach's alpha. To evaluate construct validity correlations with scores on legacy instruments (e.g., the Disabilities of the Arm, Shoulder and Hand Questionnaire) were calculated. Unidimensionality of the Dutch-Flemish PROMIS Pain Interference item bank was supported by CFA tests of model fit (CFI = 0.986, TLI = 0.986). Furthermore, the data fit the GRM and showed good coverage across the pain interference continuum (threshold-parameters range: -3.04 to 3.44). The Dutch-Flemish PROMIS Pain Interference item bank has good cross-cultural validity (only two out of 40 items showing DIF), good reliability (Cronbach's alpha = 0.98), and good construct validity (Pearson correlations between 0.62 and 0.75). A computer adaptive test (CAT) and Dutch-Flemish PROMIS short forms of the Dutch-Flemish PROMIS Pain Interference item bank can now be developed.

Calibration and Validation of the Dutch-Flemish PROMIS Pain Interference Item Bank in Patients with Chronic Pain.

Directory of Open Access Journals (Sweden)

Martine H P Crins

Full Text Available The Dutch-Flemish PROMIS Group translated the adult PROMIS Pain Interference item bank into Dutch-Flemish. The aims of the current study were to calibrate the parameters of these items using an item response theory (IRT model, to evaluate the cross-cultural validity of the Dutch-Flemish translations compared to the original English items, and to evaluate their reliability and construct validity. The 40 items in the bank were completed by 1085 Dutch chronic pain patients. Before calibrating the items, IRT model assumptions were evaluated using confirmatory factor analysis (CFA. Items were calibrated using the graded response model (GRM, an IRT model appropriate for items with more than two response options. To evaluate cross-cultural validity, differential item functioning (DIF for language (Dutch vs. English was examined. Reliability was evaluated based on standard errors and Cronbach's alpha. To evaluate construct validity correlations with scores on legacy instruments (e.g., the Disabilities of the Arm, Shoulder and Hand Questionnaire were calculated. Unidimensionality of the Dutch-Flemish PROMIS Pain Interference item bank was supported by CFA tests of model fit (CFI = 0.986, TLI = 0.986. Furthermore, the data fit the GRM and showed good coverage across the pain interference continuum (threshold-parameters range: -3.04 to 3.44. The Dutch-Flemish PROMIS Pain Interference item bank has good cross-cultural validity (only two out of 40 items showing DIF, good reliability (Cronbach's alpha = 0.98, and good construct validity (Pearson correlations between 0.62 and 0.75. A computer adaptive test (CAT and Dutch-Flemish PROMIS short forms of the Dutch-Flemish PROMIS Pain Interference item bank can now be developed.

Influence of structural parameter included in nonlocal rock mass model on stress concentration around circular tunnel

Science.gov (United States)

Lavrikov, SV; Mikenina, OA; Revuzhenko, AF

2018-03-01

A model of elastic body, including local curvature of elementary volume, is matched with a nonlocal model with a linear structural parameter in the differential approximation. The problem on deformation of rock mass around a circular cross section tunnel is solved numerically. The contours of the calculated stresses are plotted. It is shown that inclusion of local bends in the model results in expansion of influence zone of the tunnel and reduces stress concentration factor at the tunnel boundary.

Airway Clearance Techniques (ACTs)

Medline Plus

Full Text Available ... diagnostic evaluation should include a newborn screening, a sweat chloride test, a genetic or carrier test, and ... vs. IRT-DNA States Newborn Screening for CF Sweat Test Life With CF X close Caring for ...

Model for safety reports including descriptive examples; Mall foer saekerhetsrapporter med beskrivande exempel

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-01

Several safety reports will be produced in the process of planning and constructing the system for disposal of high-level radioactive waste in Sweden. The present report gives a model, with detailed examples, of how these reports should be organized and what steps they should include. In the near future safety reports will deal with the encapsulation plant and the repository. Later reports will treat operation of the handling systems and the repository.

Modeling of Pem Fuel Cell Systems Including Controls and Reforming Effects for Hybrid Automotive Applications

National Research Council Canada - National Science Library

Boettner, Daisie

2001-01-01

.... This study develops models for a stand-alone Proton Exchange Membrane (PEM) fuel cell stack, a direct-hydrogen fuel cell system including auxiliaries, and a methanol reforming fuel cell system for integration into a vehicle performance simulator...

An Integrated Biochemistry Laboratory, Including Molecular Modeling

Science.gov (United States)

Hall, Adele J. Wolfson Mona L.; Branham, Thomas R.

1996-11-01

) experience with methods of protein purification; (iii) incorporation of appropriate controls into experiments; (iv) use of basic statistics in data analysis; (v) writing papers and grant proposals in accepted scientific style; (vi) peer review; (vii) oral presentation of results and proposals; and (viii) introduction to molecular modeling. Figure 1 illustrates the modular nature of the lab curriculum. Elements from each of the exercises can be separated and treated as stand-alone exercises, or combined into short or long projects. We have been able to offer the opportunity to use sophisticated molecular modeling in the final module through funding from an NSF-ILI grant. However, many of the benefits of the research proposal can be achieved with other computer programs, or even by literature survey alone. Figure 1.Design of project-based biochemistry laboratory. Modules (projects, or portions of projects) are indicated as boxes. Each of these can be treated independently, or used as part of a larger project. Solid lines indicate some suggested paths from one module to the next. The skills and knowledge required for protein purification and design are developed in three units: (i) an introduction to critical assays needed to monitor degree of purification, including an evaluation of assay parameters; (ii) partial purification by ion-exchange techniques; and (iii) preparation of a grant proposal on protein design by mutagenesis. Brief descriptions of each of these units follow, with experimental details of each project at the end of this paper. Assays for Lysozyme Activity and Protein Concentration (4 weeks) The assays mastered during the first unit are a necessary tool for determining the purity of the enzyme during the second unit on purification by ion exchange. These assays allow an introduction to the concept of specific activity (units of enzyme activity per milligram of total protein) as a measure of purity. In this first sequence, students learn a turbidimetric assay

Including the effects of filamentous bulking sludge during the simulation of wastewater treatment plants using a risk assessment model

DEFF Research Database (Denmark)

Flores Alsina, Xavier; Comas, J.; Rodriquez-Roda, I.

2009-01-01

The main objective of this paper is to demonstrate how including the occurrence of filamentous bulking sludge in a secondary clarifier model will affect the predicted process performance during the simulation of WWTPs. The IWA Benchmark Simulation Model No. 2 (BSM2) is hereby used as a simulation...... are automatically changed during the simulation by modifying the settling model parameters to mimic the effect of growth of filamentous bacteria. The simulation results demonstrate that including effects of filamentous bulking in the secondary clarifier model results in a more realistic plant performance...

Include dispersion in quantum chemical modeling of enzymatic reactions: the case of isoaspartyl dipeptidase.

Science.gov (United States)

Zhang, Hai-Mei; Chen, Shi-Lu

2015-06-09

The lack of dispersion in the B3LYP functional has been proposed to be the main origin of big errors in quantum chemical modeling of a few enzymes and transition metal complexes. In this work, the essential dispersion effects that affect quantum chemical modeling are investigated. With binuclear zinc isoaspartyl dipeptidase (IAD) as an example, dispersion is included in the modeling of enzymatic reactions by two different procedures, i.e., (i) geometry optimizations followed by single-point calculations of dispersion (approach I) and (ii) the inclusion of dispersion throughout geometry optimization and energy evaluation (approach II). Based on a 169-atom chemical model, the calculations show a qualitative consistency between approaches I and II in energetics and most key geometries, demonstrating that both approaches are available with the latter preferential since both geometry and energy are dispersion-corrected in approach II. When a smaller model without Arg233 (147 atoms) was used, an inconsistency was observed, indicating that the missing dispersion interactions are essentially responsible for determining equilibrium geometries. Other technical issues and mechanistic characteristics of IAD are also discussed, in particular with respect to the effects of Arg233.

Focal plane array based infrared thermography in fine physical experiment

International Nuclear Information System (INIS)

Vainer, Boris G

2008-01-01

By two examples of dissimilar physical phenomena causing thermophysical effects, the unique capabilities of one of the up-to-date methods of experimental physics-focal plane array (FPA) based infrared (IR) thermography (IRT), are demonstrated distinctly. Experimenters inexperienced in IRT can grasp how this method provides a means for combining real-time visualization with quantitative analysis. A narrow-band short-wavelength IR camera was used in the experiments. It is discussed and stated that IRT is best matched and suited to the next two test conditions-when a heated specimen is thin and when heat is generated in the immediate region of a surface of a solid. The first prerequisite is realized in the search for directional patterns of combined low-power radiation sources with the use of the IRT-aided method. The second one is realized in studies of water vapour adsorption on uneven (irregular) surfaces of solid materials. With multiple swatches taken from a set of different fabrics and used as experimental samples, a sharp distinction between adsorptivities of their surfaces is strikingly illustrated by IRT time-domain measurements exhibiting the associated thermal effect ranging within an order of magnitude. It is justified that the described IRT-aided test can find practical implementation at least in the light industry. Emissivities of different fabrics are evaluated experimentally with the described reflection method based on the narrow spectral range of IRT. On the basis of direct IR observations, attention is paid to the need for close control over the surface temperature increase while the adsorption isotherms are being measured. Sensitivity of the FPA-based IRT method, as applied to examine the kinetics of initial stages of adsorption of gaseous molecules on the solid surface, is evaluated analytically and quantitatively. The relationship between the amount of adsorbate and the measurable excess of adsorbent temperature is found. It is discovered that

Assessment of score- and Rasch-based methods for group comparison of longitudinal patient-reported outcomes with intermittent missing data (informative and non-informative).

Science.gov (United States)

de Bock, Élodie; Hardouin, Jean-Benoit; Blanchin, Myriam; Le Neel, Tanguy; Kubis, Gildas; Sébille, Véronique

2015-01-01

The purpose of this study was to identify the most adequate strategy for group comparison of longitudinal patient-reported outcomes in the presence of possibly informative intermittent missing data. Models coming from classical test theory (CTT) and item response theory (IRT) were compared. Two groups of patients' responses to dichotomous items with three times of assessment were simulated. Different cases were considered: presence or absence of a group effect and/or a time effect, a total of 100 or 200 patients, 4 or 7 items and two different values for the correlation coefficient of the latent trait between two consecutive times (0.4 or 0.9). Cases including informative and non-informative intermittent missing data were compared at different rates (15, 30 %). These simulated data were analyzed with CTT using score and mixed model (SM) and with IRT using longitudinal Rasch mixed model (LRM). The type I error, the power and the bias of the group effect estimations were compared between the two methods. This study showed that LRM performs better than SM. When the rate of missing data rose to 30 %, estimations were biased with SM mainly for informative missing data. Otherwise, LRM and SM methods were comparable concerning biases. However, regardless of the rate of intermittent missing data, power of LRM was higher compared to power of SM. In conclusion, LRM should be favored when the rate of missing data is higher than 15 %. For other cases, SM and LRM provide similar results.

Mean field diffusion models for precipitation in crystalline GaAs including surface tension and bulk stresses

Energy Technology Data Exchange (ETDEWEB)

Dreyer, Wolfgang [Weierstrass-Institut fuer Angewandte Analysis und Stochastik (WIAS) im Forschungsverbund Berlin e.V. (Germany); Kimmerle, Sven-Joachim [Humboldt-Univ. Berlin (Germany). Dept. of Mathematics

2009-07-01

Based on a thermodynamically consistent model for precipitation in gallium arsenide crystals including surface tension and bulk stresses by Dreyer and Duderstadt, we propose different mathematical models to describe the size evolution of liquid droplets in a crystalline solid. The first class of models treats the diffusion-controlled regime of interface motion, while the second class is concerned with the interface-controlled regime of interface motion. Our models take care of conservation of mass and substance. We consider homogenised models, where different length scales of the experimental situation have been exploited in order to simplify the equations. These homogenised models generalise the well-known Lifshitz-Slyozov-Wagner model for Ostwald ripening. Mean field models capture the main properties of our system and are well adapted for numerics and further analysis. Numerical evidence suggests in which case which one of the two regimes might be appropriate to the experimental situation. (orig.)

Precise determination of the heat delivery during in vivo magnetic nanoparticle hyperthermia with infrared thermography

Science.gov (United States)

Rodrigues, Harley F.; Capistrano, Gustavo; Mello, Francyelli M.; Zufelato, Nicholas; Silveira-Lacerda, Elisângela; Bakuzis, Andris F.

2017-05-01

Non-invasive and real-time monitoring of the heat delivery during magnetic nanoparticle hyperthermia (MNH) is of fundamental importance to predict clinical outcomes for cancer treatment. Infrared thermography (IRT) can determine the surface temperature due to three-dimensional heat delivery inside a subcutaneous tumor, an argument that is supported by numerical simulations. However, for precise temperature determination, it is of crucial relevance to use a correct experimental configuration. This work reports an MNH study using a sarcoma 180 murine tumor containing 3.9 mg of intratumorally injected manganese-ferrite nanoparticles. MNH was performed at low field amplitude and non-uniform field configuration. Five 30 min in vivo magnetic hyperthermia experiments were performed, monitoring the surface temperature with a fiber optical sensor and thermal camera at distinct angles with respect to the animal’s surface. The results indicate that temperature errors as large as 7~\\circ C can occur if the experiment is not properly designed. A new IRT error model is found to explain the data. More importantly, we show how to precisely monitor temperature with IRT during hyperthermia, which could positively impact heat dosimetry and clinical planning.

Habitability of super-Earth planets around other suns: models including Red Giant Branch evolution.

Science.gov (United States)

von Bloh, W; Cuntz, M; Schröder, K-P; Bounama, C; Franck, S

2009-01-01

The unexpected diversity of exoplanets includes a growing number of super-Earth planets, i.e., exoplanets with masses of up to several Earth masses and a similar chemical and mineralogical composition as Earth. We present a thermal evolution model for a 10 Earth-mass planet orbiting a star like the Sun. Our model is based on the integrated system approach, which describes the photosynthetic biomass production and takes into account a variety of climatological, biogeochemical, and geodynamical processes. This allows us to identify a so-called photosynthesis-sustaining habitable zone (pHZ), as determined by the limits of biological productivity on the planetary surface. Our model considers solar evolution during the main-sequence stage and along the Red Giant Branch as described by the most recent solar model. We obtain a large set of solutions consistent with the principal possibility of life. The highest likelihood of habitability is found for "water worlds." Only mass-rich water worlds are able to realize pHZ-type habitability beyond the stellar main sequence on the Red Giant Branch.

Empirical Validation of a Thermal Model of a Complex Roof Including Phase Change Materials

Directory of Open Access Journals (Sweden)

Stéphane Guichard

2015-12-01

Full Text Available This paper deals with the empirical validation of a building thermal model of a complex roof including a phase change material (PCM. A mathematical model dedicated to PCMs based on the heat apparent capacity method was implemented in a multi-zone building simulation code, the aim being to increase the understanding of the thermal behavior of the whole building with PCM technologies. In order to empirically validate the model, the methodology is based both on numerical and experimental studies. A parametric sensitivity analysis was performed and a set of parameters of the thermal model has been identified for optimization. The use of the generic optimization program called GenOpt® coupled to the building simulation code enabled to determine the set of adequate parameters. We first present the empirical validation methodology and main results of previous work. We then give an overview of GenOpt® and its coupling with the building simulation code. Finally, once the optimization results are obtained, comparisons of the thermal predictions with measurements are found to be acceptable and are presented.

Comparison of examination grades using item response theory : a case study

NARCIS (Netherlands)

Korobko, O.B.

2007-01-01

In item response theory (IRT), mathematical models are applied to analyze data from tests and questionnaires used to measure abilities, proficiency, personality traits and attitudes. This thesis is concerned with comparison of subjects, students and schools based on average examination grades using

A simple and fast item selection procedure for adaptive testing

NARCIS (Netherlands)

Veerkamp, W.J.J.; Veerkamp, Wim J.J.; Berger, Martijn; Berger, Martijn P.F.

1994-01-01

Items with the highest discrimination parameter values in a logistic item response theory (IRT) model do not necessarily give maximum information. This paper shows which discrimination parameter values (as a function of the guessing parameter and the distance between person ability and item

The effect of person misfit on classification decisions

NARCIS (Netherlands)

Hendrawan, I.; Glas, Cornelis A.W.; Meijer, R.R.

2001-01-01

The effect of person misfit to an item response theory (IRT) model on a mastery/nonmastery decision was investigated. Also investigated was whether the classification precision can be improved by identifying misfitting respondents using person-fit statistics. A simulation study was conducted to

TS Fuzzy Model-Based Controller Design for a Class of Nonlinear Systems Including Nonsmooth Functions

DEFF Research Database (Denmark)

Vafamand, Navid; Asemani, Mohammad Hassan; Khayatiyan, Alireza

2018-01-01

This paper proposes a novel robust controller design for a class of nonlinear systems including hard nonlinearity functions. The proposed approach is based on Takagi-Sugeno (TS) fuzzy modeling, nonquadratic Lyapunov function, and nonparallel distributed compensation scheme. In this paper, a novel...... criterion, new robust controller design conditions in terms of linear matrix inequalities are derived. Three practical case studies, electric power steering system, a helicopter model and servo-mechanical system, are presented to demonstrate the importance of such class of nonlinear systems comprising...

Improvement in genetic evaluation of female fertility in dairy cattle using multiple-trait models including milk production traits

DEFF Research Database (Denmark)

Sun, C; Madsen, P; Lund, M S

2010-01-01

This study investigated the improvement in genetic evaluation of fertility traits by using production traits as secondary traits (MILK = 305-d milk yield, FAT = 305-d fat yield, and PROT = 305-d protein yield). Data including 471,742 records from first lactations of Denmark Holstein cows, covering...... the years of inseminations during first lactations from 1995 to 2004, were analyzed. Six fertility traits (i.e., interval in days from calving to first insemination, calving interval, days open, interval in days from first to last insemination, numbers of inseminations per conception, and nonreturn rate...... stability and predictive ability than single-trait models for all the fertility traits, except for nonreturn rate within 56 d after first service. The stability and predictive ability for the model including MILK or PROT were similar to the model including all 3 milk production traits and better than...

Validation on groundwater flow model including sea level change. Modeling on groundwater flow in coastal granite area

International Nuclear Information System (INIS)

Hasegawa, Takuma; Miyakawa, Kimio

2009-01-01

It is important to verify the groundwater flow model that reproduces pressure head, water chemistry, and groundwater age. However, water chemistry and groundwater age are considered to be influenced by historical events. In this study, sea level change during glacial-interglacial cycle was taken into account for simulating salinity and groundwater age at coastal granite area. As a result of simulation, salinity movement could not catch up with sea level changes, and mixing zone was formed below the fresh-water zone. This mixing zone was observed in the field measurement, and the observed salinities were agreed with simulated results including sea level change. The simulated residence time including sea level change is one-tenth of steady state. The reason is that the saline water was washed out during regression and modern sea-water was infiltrated during transgression. As mentioned before, considering sea level change are important to reproduce salinity and helium age at coastal area. (author)

How much plutonium does North Korea really have?

International Nuclear Information System (INIS)

Dreicer, J.S.

1997-01-01

In a previous study, as part of the Global Nuclear Material Control Model effort, the author estimated the maximum quantity of plutonium that could be produced in thermal research reactors in the potential nuclear weapon states (including North Korea), based on their declared power level. D. Albright has estimated the amount of plutonium the North Koreans may have produced since 1986 in the 5-megawatt-electric power reactor at Yongbon. Albright provided an upper-bound estimate of 53 kilograms of weapon-grade plutonium produced cumulatively if the gas-graphite (magnox) reactor had achieved a load factor of 0.80. This cumulative estimate of 53 kilograms ignores the potential plutonium production in the 8-megawatt-thermal research reactor, IRT-DPRK. To better quantify the cumulative North Korean production, the author conducted a study to estimate the amount of plutonium that could have been produced in the IRT-DPRK research reactor operating at the declared power level during the entire period it has operated, including a period it was not safeguarded. The author estimates that, at most, an additional 6 to 33 kilograms of plutonium could have been produced cumulatively in the research reactor operating at the declared power level during the entire period it has operated, including a 12-year period it was not safeguarded, resulting in a total of 13 to 47 kilograms of plutonium possibly produced in both the research and power reactors

A New Extension of the Binomial Error Model for Responses to Items of Varying Difficulty in Educational Testing and Attitude Surveys.

Directory of Open Access Journals (Sweden)

James A Wiley

Full Text Available We put forward a new item response model which is an extension of the binomial error model first introduced by Keats and Lord. Like the binomial error model, the basic latent variable can be interpreted as a probability of responding in a certain way to an arbitrarily specified item. For a set of dichotomous items, this model gives predictions that are similar to other single parameter IRT models (such as the Rasch model but has certain advantages in more complex cases. The first is that in specifying a flexible two-parameter Beta distribution for the latent variable, it is easy to formulate models for randomized experiments in which there is no reason to believe that either the latent variable or its distribution vary over randomly composed experimental groups. Second, the elementary response function is such that extensions to more complex cases (e.g., polychotomous responses, unfolding scales are straightforward. Third, the probability metric of the latent trait allows tractable extensions to cover a wide variety of stochastic response processes.

Measuring positive affect and well-being after spinal cord injury: Development and psychometric characteristics of the SCI-QOL Positive Affect and Well-being bank and short form.

Science.gov (United States)

Bertisch, Hilary; Kalpakjian, Claire Z; Kisala, Pamela A; Tulsky, David S

2015-05-01

To develop an item response theory (IRT)-calibrated spinal cord injury (SCI)-specific Positive Affect and Well-being (PAWB) item bank with flexible options for administration. Qualitative feedback from patient and provider focus groups was used to expand on the Neurological Disorders and Quality of Life (Neuro-QOL) positive affect & well-being item bank for use in SCI. New items were created and revised based on expert review and patient feedback and were then field tested. Analyses included confirmatory factor analysis, graded response IRT modeling and evaluation of differential item functioning (DIF). We tested a 32-item pool at several rehabilitation centers across the United States, including the University of Michigan, Kessler Foundation, Rehabilitation Institute of Chicago, the University of Washington, Craig Hospital and the James J. Peters/Bronx Department of Veterans Affairs hospital. A total of 717 individuals with SCI answered the PAWB questions. A unidimensional model was observed (Confirmatory Fit Index=0.947; Root Mean Square Error of Approximation=0.094) and measurement precision was good (reliability in theta of -2.9 to 1.2 is roughly equivalent to classical reliability of 0.95 or above). Twelve items were flagged for DIF, however, after examination of effect sizes, the DIF was determined to be negligible and would have little practical impact on score estimates. The final calibrated item bank resulted in 28 retained items This study indicates that the Spinal Cord Injury--Quality of Life PAWB bank represents a psychometrically robust measurement tool. Short form items are also suggested and a computer adaptive test is available.

Development and psychometric characteristics of the SCI-QOL Bladder Management Difficulties and Bowel Management Difficulties item banks and short forms and the SCI-QOL Bladder Complications scale.

Science.gov (United States)

Tulsky, David S; Kisala, Pamela A; Tate, Denise G; Spungen, Ann M; Kirshblum, Steven C

2015-05-01

To describe the development and psychometric properties of the Spinal Cord Injury--Quality of Life (SCI-QOL) Bladder Management Difficulties and Bowel Management Difficulties item banks and Bladder Complications scale. Using a mixed-methods design, a pool of items assessing bladder and bowel-related concerns were developed using focus groups with individuals with spinal cord injury (SCI) and SCI clinicians, cognitive interviews, and item response theory (IRT) analytic approaches, including tests of model fit and differential item functioning. Thirty-eight bladder items and 52 bowel items were tested at the University of Michigan, Kessler Foundation Research Center, the Rehabilitation Institute of Chicago, the University of Washington, Craig Hospital, and the James J. Peters VA Medical Center, Bronx, NY. Seven hundred fifty-seven adults with traumatic SCI. The final item banks demonstrated unidimensionality (Bladder Management Difficulties CFI=0.965; RMSEA=0.093; Bowel Management Difficulties CFI=0.955; RMSEA=0.078) and acceptable fit to a graded response IRT model. The final calibrated Bladder Management Difficulties bank includes 15 items, and the final Bowel Management Difficulties item bank consists of 26 items. Additionally, 5 items related to urinary tract infections (UTI) did not fit with the larger Bladder Management Difficulties item bank but performed relatively well independently (CFI=0.992, RMSEA=0.050) and were thus retained as a separate scale. The SCI-QOL Bladder Management Difficulties and Bowel Management Difficulties item banks are psychometrically robust and are available as computer adaptive tests or short forms. The SCI-QOL Bladder Complications scale is a brief, fixed-length outcomes instrument for individuals with a UTI.

A New Circuit Model for Spin-Torque Oscillator Including Perpendicular Torque of Magnetic Tunnel Junction

Directory of Open Access Journals (Sweden)

Hyein Lim

2013-01-01

Full Text Available Spin-torque oscillator (STO is a promising new technology for the future RF oscillators, which is based on the spin-transfer torque (STT effect in magnetic multilayered nanostructure. It is expected to provide a larger tunability, smaller size, lower power consumption, and higher level of integration than the semiconductor-based oscillators. In our previous work, a circuit-level model of the giant magnetoresistance (GMR STO was proposed. In this paper, we present a physics-based circuit-level model of the magnetic tunnel junction (MTJ-based STO. MTJ-STO model includes the effect of perpendicular torque that has been ignored in the GMR-STO model. The variations of three major characteristics, generation frequency, mean oscillation power, and generation linewidth of an MTJ-STO with respect to the amount of perpendicular torque, are investigated, and the results are applied to our model. The operation of the model was verified by HSPICE simulation, and the results show an excellent agreement with the experimental data. The results also prove that a full circuit-level simulation with MJT-STO devices can be made with our proposed model.

Lemons, Mealworms, and the Giant Amoeba: A Eureka Trip through School Science.

Science.gov (United States)

McCormack, Alan J.

1980-01-01

Outlines teaching methods that emphasize the use of the right hemisphere of the brain. Argues that most productive thinking requires both modes of thinking and that any good elementary science program should include activities designed to develop both modes. (Author/IRT)

RhinAsthma patient perspective: A Rasch validation study.

Science.gov (United States)

Molinengo, Giorgia; Baiardini, Ilaria; Braido, Fulvio; Loera, Barbara

2018-02-01

In daily practice, Health-Related Quality of Life (HRQoL) tools are useful for supplementing clinical data with the patient's perspective. To encourage their use by clinicians, the availability of tools that can quickly provide valid results is crucial. A new HRQoL tool has been proposed for patients with asthma and rhinitis: the RhinAsthma Patient Perspective-RAPP. The aim of this study was to evaluate the psychometric robustness of the RAPP using the Item Response Theory (IRT) approach, to evaluate the scalability of items and test whether or not patients use the items response scale correctly. 155 patients (53.5% women, mean age 39.1, range 16-76) were recruited during a multicenter study. RAPP metric properties were investigated using IRT models. Differential item functioning (DIF) was used for gender, age, and asthma control test (ACT). The RAPP adequately fitted the Rating Scale model, demonstrating the equality of the rating scale structure for all items. All statistics on items were satisfactory. The RAPP had adequate internal reliability and showed good ability to discriminate among different groups of participants. DIF analysis indicated that there were no differential item functioning issues for gender. One item showed a DIF by age and four items by ACT. The psychometric evaluation performed using IRT models demonstrated that the RAPP met all the criteria to be considered a reliable and valid method of measurement. From a clinical perspective, this will allow physicians to confidently interpret scores as good indicators of Quality of Life of patients with asthma.

Airway Clearance Techniques (ACTs)

Medline Plus

Full Text Available ... Cystic Fibrosis CFTR-Related Metabolic Syndrome (CRMS) How Babies Are Screened in IRT-Only vs. IRT-DNA ... and find the best possible CF care. CF Infant Care PARENT AND GUARDIAN GUIDANCE Working With Your ...

Integrated radwaste treatment system lessons learned from 2 1/2 years of operation

International Nuclear Information System (INIS)

Baker, M.N.; Fussner, R.J.

1997-05-01

The Integrated Radwaste Treatment System (IRTS) at the West Valley Demonstration Project (WVDP) is a pretreatment scheme to reduce the amount of salts in the high-level radioactive waste (vitrification) stream. Following removal of cesium-137 (Cs-137) by ion-exchange in the Supernatant Treatment System (STS), the radioactive waste liquid is volume-reduced by evaporation. Trace amounts of Cs-137 in the resulting distillate are removed by ion-exchange, then the distillate is discharged to the existing plant water treatment system. The concentrated product, 37 to 41 percent solids by weight, is encapsulated in cement producing a stable, low-level waste form. The Integrated Radwaste Treatment System (IRTS) operated in this mode from May 1988 through November 1990, decontaminating 450,000 gallons of high-level waste liquid; evaporating and encapsulating the resulting concentrates into 10,393 71-gallon square drums. A number of process changes and variations from the original operating plan were required to increase the system flow rate and minimize waste volumes. This report provides a summary of work performed to operate the IRTS, including system descriptions, process highlights, and lessons learned

Dynamic experiments with high bisphenol-A concentrations modelled with an ASM model extended to include a separate XOC degrading microorganism

DEFF Research Database (Denmark)

Lindblom, Erik Ulfson; Press-Kristensen, Kåre; Vanrolleghem, P.A.

2009-01-01

The perspective of this work is to develop a model, which can be used to better understand and optimize wastewater treatment plants that are able to remove xenobiotic organic compounds (XOCs) in combination with removal of traditional pollutants. Results from dynamic experiments conducted...... with the endocrine disrupting XOC bisphenol-A (BPA) in an activated sludge process with real wastewater were used to hypothesize an ASM-based process model including aerobic growth of a specific BPA-degrading microorganism and sorption of BPA to sludge. A parameter estimation method was developed, which...... simultaneously utilizes steady-state background concentrations and dynamic step response data, as well as conceptual simplifications of the plant configuration. Validation results show that biodegradation of BPA is sensitive to operational conditions before and during the experiment and that the proposed model...

Development and validation of a new knowledge, attitude, belief and practice questionnaire on leptospirosis in Malaysia.

Science.gov (United States)

Zahiruddin, Wan Mohd; Arifin, Wan Nor; Mohd-Nazri, Shafei; Sukeri, Surianti; Zawaha, Idris; Bakar, Rahman Abu; Hamat, Rukman Awang; Malina, Osman; Jamaludin, Tengku Zetty Maztura Tengku; Pathman, Arumugam; Mas-Harithulfadhli-Agus, Ab Rahman; Norazlin, Idris; Suhailah, Binti Samsudin; Saudi, Siti Nor Sakinah; Abdullah, Nurul Munirah; Nozmi, Noramira; Zainuddin, Abdul Wahab; Aziah, Daud

2018-03-07

In Malaysia, leptospirosis is considered an endemic disease, with sporadic outbreaks following rainy or flood seasons. The objective of this study was to develop and validate a new knowledge, attitude, belief and practice (KABP) questionnaire on leptospirosis for use in urban and rural populations in Malaysia. The questionnaire comprised development and validation stages. The development phase encompassed a literature review, expert panel review, focus-group testing, and evaluation. The validation phase consisted of exploratory and confirmatory parts to verify the psychometric properties of the questionnaire. A total of 214 and 759 participants were recruited from two Malaysian states, Kelantan and Selangor respectively, for the validation phase. The participants comprised urban and rural communities with a high reported incidence of leptospirosis. The knowledge section of the validation phase utilized item response theory (IRT) analysis. The attitude and belief sections utilized exploratory factor analysis (EFA) and confirmatory factor analysis (CFA). The development phase resulted in a questionnaire that included four main sections: knowledge, attitude, belief, and practice. In the exploratory phase, as shown by the IRT analysis of knowledge about leptospirosis, the difficulty and discrimination values of the items were acceptable, with the exception of two items. Based on the EFA, the psychometric properties of the attitude, belief, and practice sections were poor. Thus, these sections were revised, and no further factor analysis of the practice section was conducted. In the confirmatory stage, the difficulty and discrimination values of the items in the knowledge section remained within the acceptable range. The CFA of the attitude section resulted in a good-fitting two-factor model. The CFA of the belief section retained low number of items, although the analysis resulted in a good fit in the final three-factor model. Based on the IRT analysis and factor

Caffeine use disorder: An item-response theory analysis of proposed DSM-5 criteria.

Science.gov (United States)

Ágoston, Csilla; Urbán, Róbert; Richman, Mara J; Demetrovics, Zsolt

2018-06-01

Caffeine is a common psychoactive substance with a documented addictive potential. Caffeine withdrawal has been included in the Diagnostic and Statistical Manual of Mental Disorders (DSM-5), but caffeine use disorder (CUD) is considered to be a condition for further study. The aim of the current study is (1) to test the psychometric properties of the Caffeine Use Disorder Questionnaire (CUDQ) by using a confirmatory factor analysis and an item response theory (IRT) approach, (2) to compare IRT models with varying numbers of parameters and models with or without caffeine consumption criteria, and (3) to examine if the total daily caffeine consumption and the use of different caffeinated products can predict the magnitude of CUD symptomatology. A cross-sectional study was conducted on an adult sample (N = 2259). Participants answered several questions regarding their caffeine consumption habits and completed the CUDQ, which incorporates the nine proposed criteria of the DSM-5 as well as one additional item regarding the suffering caused by the symptoms. Factor analyses demonstrated the unidimensionality of the CUDQ. The suffering criterion had the highest discriminative value at a higher degree of latent trait. The criterion of failure to fulfill obligations and social/interpersonal problems discriminate only at the higher value of CUD latent factor, while endorsement the consumption of more caffeine or longer than intended and craving criteria were discriminative at a lower level of CUD. Total daily caffeine intake was related to a higher level of CUD. Daily coffee, energy drink, and cola intake as dummy variables were associated with the presence of more CUD symptoms, while daily tea consumption as a dummy variable was related to less CUD symptoms. Regular smoking was associated with more CUD symptoms, which was explained by a larger caffeine consumption. The IRT approach helped to determine which CUD symptoms indicate more severity and have a greater

Challenges of including nitrogen effects on decomposition in earth system models

Science.gov (United States)

Hobbie, S. E.

2011-12-01

Despite the importance of litter decomposition for ecosystem fertility and carbon balance, key uncertainties remain about how this fundamental process is affected by nitrogen (N) availability. Nevertheless, resolving such uncertainties is critical for mechanistic inclusion of such processes in earth system models, towards predicting the ecosystem consequences of increased anthropogenic reactive N. Towards that end, we have conducted a series of experiments examining nitrogen effects on litter decomposition. We found that both substrate N and externally supplied N (regardless of form) accelerated the initial decomposition rate. Faster initial decomposition rates were linked to the higher activity of carbohydrate-degrading enzymes associated with externally supplied N and the greater relative abundances of Gram negative and Gram positive bacteria associated with green leaves and externally supplied organic N (assessed using phospholipid fatty acid analysis, PLFA). By contrast, later in decomposition, externally supplied N slowed decomposition, increasing the fraction of slowly decomposing litter and reducing lignin-degrading enzyme activity and relative abundances of Gram negative and Gram positive bacteria. Our results suggest that elevated atmospheric N deposition may have contrasting effects on the dynamics of different soil carbon pools, decreasing mean residence times of active fractions comprising very fresh litter, while increasing those of more slowly decomposing fractions including more processed litter. Incorporating these contrasting effects of N on decomposition processes into models is complicated by lingering uncertainties about how these effects generalize across ecosystems and substrates.

Item response theory and factor analysis as a mean to characterize occurrence of response shift in a longitudinal quality of life study in breast cancer patients

Science.gov (United States)

2014-01-01

Background The occurrence of response shift (RS) in longitudinal health-related quality of life (HRQoL) studies, reflecting patient adaptation to disease, has already been demonstrated. Several methods have been developed to detect the three different types of response shift (RS), i.e. recalibration RS, 2) reprioritization RS, and 3) reconceptualization RS. We investigated two complementary methods that characterize the occurrence of RS: factor analysis, comprising Principal Component Analysis (PCA) and Multiple Correspondence Analysis (MCA), and a method of Item Response Theory (IRT). Methods Breast cancer patients (n = 381) completed the EORTC QLQ-C30 and EORTC QLQ-BR23 questionnaires at baseline, immediately following surgery, and three and six months after surgery, according to the “then-test/post-test” design. Recalibration was explored using MCA and a model of IRT, called the Linear Logistic Model with Relaxed Assumptions (LLRA) using the then-test method. Principal Component Analysis (PCA) was used to explore reconceptualization and reprioritization. Results MCA highlighted the main profiles of recalibration: patients with high HRQoL level report a slightly worse HRQoL level retrospectively and vice versa. The LLRA model indicated a downward or upward recalibration for each dimension. At six months, the recalibration effect was statistically significant for 11/22 dimensions of the QLQ-C30 and BR23 according to the LLRA model (p ≤ 0.001). Regarding the QLQ-C30, PCA indicated a reprioritization of symptom scales and reconceptualization via an increased correlation between functional scales. Conclusions Our findings demonstrate the usefulness of these analyses in characterizing the occurrence of RS. MCA and IRT model had convergent results with then-test method to characterize recalibration component of RS. PCA is an indirect method in investigating the reprioritization and reconceptualization components of RS. PMID:24606836

A generalized model for optimal transport of images including dissipation and density modulation

KAUST Repository

Maas, Jan

2015-11-01

© EDP Sciences, SMAI 2015. In this paper the optimal transport and the metamorphosis perspectives are combined. For a pair of given input images geodesic paths in the space of images are defined as minimizers of a resulting path energy. To this end, the underlying Riemannian metric measures the rate of transport cost and the rate of viscous dissipation. Furthermore, the model is capable to deal with strongly varying image contrast and explicitly allows for sources and sinks in the transport equations which are incorporated in the metric related to the metamorphosis approach by Trouvé and Younes. In the non-viscous case with source term existence of geodesic paths is proven in the space of measures. The proposed model is explored on the range from merely optimal transport to strongly dissipative dynamics. For this model a robust and effective variational time discretization of geodesic paths is proposed. This requires to minimize a discrete path energy consisting of a sum of consecutive image matching functionals. These functionals are defined on corresponding pairs of intensity functions and on associated pairwise matching deformations. Existence of time discrete geodesics is demonstrated. Furthermore, a finite element implementation is proposed and applied to instructive test cases and to real images. In the non-viscous case this is compared to the algorithm proposed by Benamou and Brenier including a discretization of the source term. Finally, the model is generalized to define discrete weighted barycentres with applications to textures and objects.

Full instantaneous traversal rupture of the primary loop pipeline

International Nuclear Information System (INIS)

Baytelesov, S.A.; Kungurov, F.R.

2010-01-01

Accident, reflecting full immediate cross rupture of primary loop pipe of WWR-SM research reactor of INP AS RUz is observed in this paper. Calculations for accident situation and analysis for different reactor cores, formed from fully IRT-3M type high enriched fuel (36% enrichment on 235 U), first mixed core, compiled from 16 IRT-3M fuel assemblies and 4 IRT-4M type fuel assemblies with low enriched fuel (19,7% enrichment on 235 U) and the core fully formed from low enriched fuel are carried out

Airway Clearance Techniques (ACTs)

Medline Plus

Full Text Available ... should include a newborn screening, a sweat chloride test, a genetic or carrier test, and a clinical evaluation at a CF Foundation- ... IRT-DNA States Newborn Screening for CF Sweat Test Life With CF X close Caring for a ...

Global atmospheric model for mercury including oxidation by bromine atoms

Directory of Open Access Journals (Sweden)

C. D. Holmes

2010-12-01

Full Text Available Global models of atmospheric mercury generally assume that gas-phase OH and ozone are the main oxidants converting Hg⁰ to Hg^II and thus driving mercury deposition to ecosystems. However, thermodynamic considerations argue against the importance of these reactions. We demonstrate here the viability of atomic bromine (Br as an alternative Hg⁰ oxidant. We conduct a global 3-D simulation with the GEOS-Chem model assuming gas-phase Br to be the sole Hg⁰ oxidant (Hg + Br model and compare to the previous version of the model with OH and ozone as the sole oxidants (Hg + OH/O₃ model. We specify global 3-D Br concentration fields based on our best understanding of tropospheric and stratospheric Br chemistry. In both the Hg + Br and Hg + OH/O₃ models, we add an aqueous photochemical reduction of Hg^II in cloud to impose a tropospheric lifetime for mercury of 6.5 months against deposition, as needed to reconcile observed total gaseous mercury (TGM concentrations with current estimates of anthropogenic emissions. This added reduction would not be necessary in the Hg + Br model if we adjusted the Br oxidation kinetics downward within their range of uncertainty. We find that the Hg + Br and Hg + OH/O₃ models are equally capable of reproducing the spatial distribution of TGM and its seasonal cycle at northern mid-latitudes. The Hg + Br model shows a steeper decline of TGM concentrations from the tropics to southern mid-latitudes. Only the Hg + Br model can reproduce the springtime depletion and summer rebound of TGM observed at polar sites; the snowpack component of GEOS-Chem suggests that 40% of Hg^II deposited to snow in the Arctic is transferred to the ocean and land reservoirs, amounting to a net deposition flux to the Arctic of 60 Mg a⁻¹. Summertime events of depleted Hg⁰ at Antarctic sites due to subsidence are much better simulated by

Mass Screening of Suspected Febrile Patients with Remote-sensing Infrared Thermography: Alarm Temperature and Optimal Distance

Directory of Open Access Journals (Sweden)

Ming-Fu Chiang

2008-12-01

Conclusion: The temperature readings obtained by IRT may be used as a proxy for core temperature. An effective IRT system with a strict operating protocol can be rapidly implemented at the entrance of a hospital during SARS or avian influenza epidemics.

Web-accessible molecular modeling with Rosetta: The Rosetta Online Server that Includes Everyone (ROSIE).

Science.gov (United States)

Moretti, Rocco; Lyskov, Sergey; Das, Rhiju; Meiler, Jens; Gray, Jeffrey J

2018-01-01

The Rosetta molecular modeling software package provides a large number of experimentally validated tools for modeling and designing proteins, nucleic acids, and other biopolymers, with new protocols being added continually. While freely available to academic users, external usage is limited by the need for expertise in the Unix command line environment. To make Rosetta protocols available to a wider audience, we previously created a web server called Rosetta Online Server that Includes Everyone (ROSIE), which provides a common environment for hosting web-accessible Rosetta protocols. Here we describe a simplification of the ROSIE protocol specification format, one that permits easier implementation of Rosetta protocols. Whereas the previous format required creating multiple separate files in different locations, the new format allows specification of the protocol in a single file. This new, simplified protocol specification has more than doubled the number of Rosetta protocols available under ROSIE. These new applications include pK a determination, lipid accessibility calculation, ribonucleic acid redesign, protein-protein docking, protein-small molecule docking, symmetric docking, antibody docking, cyclic toxin docking, critical binding peptide determination, and mapping small molecule binding sites. ROSIE is freely available to academic users at http://rosie.rosettacommons.org. © 2017 The Protein Society.

Time domain contact model for tyre/road interaction including nonlinear contact stiffness due to small-scale roughness

Science.gov (United States)

Andersson, P. B. U.; Kropp, W.

2008-11-01

Rolling resistance, traction, wear, excitation of vibrations, and noise generation are all attributes to consider in optimisation of the interaction between automotive tyres and wearing courses of roads. The key to understand and describe the interaction is to include a wide range of length scales in the description of the contact geometry. This means including scales on the order of micrometres that have been neglected in previous tyre/road interaction models. A time domain contact model for the tyre/road interaction that includes interfacial details is presented. The contact geometry is discretised into multiple elements forming pairs of matching points. The dynamic response of the tyre is calculated by convolving the contact forces with pre-calculated Green's functions. The smaller-length scales are included by using constitutive interfacial relations, i.e. by using nonlinear contact springs, for each pair of contact elements. The method is presented for normal (out-of-plane) contact and a method for assessing the stiffness of the nonlinear springs based on detailed geometry and elastic data of the tread is suggested. The governing equations of the nonlinear contact problem are solved with the Newton-Raphson iterative scheme. Relations between force, indentation, and contact stiffness are calculated for a single tread block in contact with a road surface. The calculated results have the same character as results from measurements found in literature. Comparison to traditional contact formulations shows that the effect of the small-scale roughness is large; the contact stiffness is only up to half of the stiffness that would result if contact is made over the whole element directly to the bulk of the tread. It is concluded that the suggested contact formulation is a suitable model to include more details of the contact interface. Further, the presented result for the tread block in contact with the road is a suitable input for a global tyre/road interaction model

Family Background and Optimal Schooling Decisions.

Science.gov (United States)

Lazear, Edward

1980-01-01

Examines whether variations in the levels of attained schooling across groups can be explained by a model that assumes that captial markets are perfect and that individuals maximize wealth. Available from Editorial Office, Review of Economics and Statistics, M-8 Littauer Center, Cambridge, MA 02138. (Author/IRT)

Are symptom features of depression during pregnancy, the postpartum period and outside the peripartum period distinct? Results from a nationally representative sample using item response theory (IRT).

Science.gov (United States)

Hoertel, Nicolas; López, Saioa; Peyre, Hugo; Wall, Melanie M; González-Pinto, Ana; Limosin, Frédéric; Blanco, Carlos

2015-02-01

Whether there are systematic differences in depression symptom expression during pregnancy, the postpartum period and outside these periods (i.e., outside the peripartum period) remains debated. The aim of this study was to use methods based on item response theory (IRT) to examine, after equating for depression severity, differences in the likelihood of reporting DSM-IV symptoms of major depressive episode (MDE) in women of childbearing age (i.e., aged 18-50) during pregnancy, the postpartum period and outside the peripartum period. We conducted these analyses using a large, nationally representative sample of women of childbearing age from the United States (n = 11,256) who participated in the second wave of the National Epidemiologic Survey on Alcohol and Related Conditions (NESARC). The overall 12-month prevalence of all depressive criteria (except for worthlessness/guilt) was significantly lower in pregnant women than in women of childbearing age outside the peripartum period, whereas the prevalence of all symptoms (except for "psychomotor symptoms") was not significantly different between the postpartum and the nonperipartum group. There were no clinically significant differences in the endorsement rates of symptoms of MDE by pregnancy status when equating for levels of depression severity. This study suggests that the clinical presentation of depressive symptoms in women of childbearing age does not differ during pregnancy, the postpartum period and outside the peripartum period. These findings do not provide psychometric support for the inclusion of the peripartum onset specifier for major depressive disorder in the DSM-5. © 2014 Wiley Periodicals, Inc.

A new model for including the effect of fly ash on biochemical methane potential.

Science.gov (United States)

Gertner, Pablo; Huiliñir, César; Pinto-Villegas, Paula; Castillo, Alejandra; Montalvo, Silvio; Guerrero, Lorna

2017-10-01

The modelling of the effect of trace elements on anaerobic digestion, and specifically the effect of fly ash, has been scarcely studied. Thus, the present work was aimed at the development of a new function that allows accumulated methane models to predict the effect of FA on the volume of methane accumulation. For this, purpose five fly ash concentrations (10, 25, 50, 250 and 500mg/L) using raw and pre-treated sewage sludge were used to calibrate the new function, while three fly ash concentrations were used (40, 150 and 350mg/L) for validation. Three models for accumulated methane volume (the modified Gompertz equation, the logistic function, and the transfer function) were evaluated. The results showed that methane production increased in the presence of FA when the sewage sludge was not pre-treated, while with pretreated sludge there is inhibition of methane production at FA concentrations higher than 50mg/L. In the calibration of the proposed function, it fits well with the experimental data under all the conditions, including the inhibition and stimulating zones, with the values of the parameters of the methane production models falling in the range of those reported in the literature. For validation experiments, the model succeeded in representing the behavior of new experiments in both the stimulating and inhibiting zones, with NRMSE and R 2 ranging from 0.3577 to 0.03714 and 0.2209 to 0.9911, respectively. Thus, the proposed model is robust and valid for the studied conditions. Copyright © 2017 Elsevier Ltd. All rights reserved.

Measuring organizational effectiveness in information and communication technology companies using item response theory.

Science.gov (United States)

Trierweiller, Andréa Cristina; Peixe, Blênio César Severo; Tezza, Rafael; Pereira, Vera Lúcia Duarte do Valle; Pacheco, Waldemar; Bornia, Antonio Cezar; de Andrade, Dalton Francisco

2012-01-01

The aim of this paper is to measure the effectiveness of the organizations Information and Communication Technology (ICT) from the point of view of the manager, using Item Response Theory (IRT). There is a need to verify the effectiveness of these organizations which are normally associated to complex, dynamic, and competitive environments. In academic literature, there is disagreement surrounding the concept of organizational effectiveness and its measurement. A construct was elaborated based on dimensions of effectiveness towards the construction of the items of the questionnaire which submitted to specialists for evaluation. It demonstrated itself to be viable in measuring organizational effectiveness of ICT companies under the point of view of a manager through using Two-Parameter Logistic Model (2PLM) of the IRT. This modeling permits us to evaluate the quality and property of each item placed within a single scale: items and respondents, which is not possible when using other similar tools.

A Hydrological Concept including Lateral Water Flow Compatible with the Biogeochemical Model ForSAFE

Directory of Open Access Journals (Sweden)

Giuliana Zanchi

2016-03-01

Full Text Available The study presents a hydrology concept developed to include lateral water flow in the biogeochemical model ForSAFE. The hydrology concept was evaluated against data collected at Svartberget in the Vindeln Research Forest in Northern Sweden. The results show that the new concept allows simulation of a saturated and an unsaturated zone in the soil as well as water flow that reaches the stream comparable to measurements. The most relevant differences compared to streamflow measurements are that the model simulates a higher base flow in winter and lower flow peaks after snowmelt. These differences are mainly caused by the assumptions made to regulate the percolation at the bottom of the simulated soil columns. The capability for simulating lateral flows and a saturated zone in ForSAFE can greatly improve the simulation of chemical exchange in the soil and export of elements from the soil to watercourses. Such a model can help improve the understanding of how environmental changes in the forest landscape will influence chemical loads to surface waters.

Comparing Two Versions of the MEOCS Using Differential Item Functioning

National Research Council Canada - National Science Library

Truhon, Stephen

2003-01-01

...) from item response theory (IRT). DIF was found for the majority of the 40 items examined, although in many cases the DIF indicated improvements in the revised items. Implications for these scales and for the use of IRT with the MEOCS are discussed.

Continuous gamma-ray spectrometry in the fast flux test facility (FFTF)

International Nuclear Information System (INIS)

Gold, R.; Kaiser, B.J.; Moore, F.S. Jr.; Bunch, W.L.; McElroy, W.N.; Sheen, E.M.

1980-03-01

In-core Compton-recoil γ-ray spectrometry was carried out in FFTF at very low power in the In-Reactor Thimble (IRT). The lower-energy electron spectrum at the FFTF-IRT midplane and the unfolded γ-ray spectrum are shown. 2 figures

Constitutive modeling of multiphase materials including phase transformations

NARCIS (Netherlands)

Perdahcioglu, Emin Semih; Geijselaers, Hubertus J.M.; Khan, A.S.; Meredith, C; Farrokh, B

2011-01-01

A constitutive model is developed for materials involving two or more different phases in their microstructure such as DP (Dual Phase) or TRIP (TRansformation Induced Plasticity) steels. Homogenization of the response of the phases is achieved by the Mean-Field method. One of the phases in TRIP

Outcomes following 50 consecutive endoscopic gastrojejunal revisions for weight gain following Roux-en-Y gastric bypass: a comparison of endoscopic suturing techniques for stoma reduction.

Science.gov (United States)

Patel, Lava Y; Lapin, Brittany; Brown, Craig S; Stringer, Thomas; Gitelis, Matthew E; Linn, John G; Denham, Woody E; Farwell, Elizabeth; Haggerty, Stephen; Ujiki, Michael B

2017-06-01

Approximately 20-30 % of morbidly obese patients undergoing Roux-en-Y gastric bypass (RYGB) will experience significant weight regain in the years following surgery. Endoscopic gastrojejunal revision (EGJR) has been shown to be a safe, effective and less invasive alternative to revisional surgery, with promising weight loss outcomes. However, minimal data exist regarding how to perform the procedure most effectively and what factors may predict good outcomes. We compared weight loss outcomes between patients undergoing endoscopic stoma revision by one of two full-thickness suturing techniques. A retrospective review of patients undergoing EGJR between 06/2012 and 09/2015 was performed. Included patients were adults 18-74 years of age who had experienced weight regain ≥2 years after initial RYGB with stoma dilation ≥15 mm in diameter. Revision was done with either an interrupted (IRT) or purse-string (PST) suture technique. A linear mixed effects model was constructed to predict postoperative weight loss. Fifty revisions (IRT = 36, PST = 14) were performed in 47 patients (92 % female, mean age of 50.9 ± 10.9 years and body mass index of 41.4 ± 7.1 kg/m 2 ). Technical success (stoma diameter ≤10 mm) was achieved in all cases. Final diameter was significantly smaller in the PST group, 6.6 ± 2.2 mm versus 4.8 ± 1.8 mm (p weight loss over time compared to IRT. Sixteen comorbid conditions resolved among 12 patients. No major complications occurred. Endoscopic revision of the gastric outlet results in meaningful weight loss and comorbidity resolution in select patients experiencing weight regain following RYGB. A PST revision likely results in higher and more sustainable weight loss when compared to IRT.

Fuzzy Control of Yaw and Roll Angles of a Simulated Helicopter Model Includes Articulated Manipulators

Directory of Open Access Journals (Sweden)

Hossein Sadegh Lafmejani

2015-09-01

Full Text Available Fuzzy logic controller (FLC is a heuristic method by If-Then Rules which resembles human intelligence and it is a good method for designing Non-linear control systems. In this paper, an arbitrary helicopter model includes articulated manipulators has been simulated with Matlab SimMechanics toolbox. Due to the difficulties of modeling this complex system, a fuzzy controller with simple fuzzy rules has been designed for its yaw and roll angles in order to stabilize the helicopter while it is in the presence of disturbances or its manipulators are moving for a task. Results reveal that a simple FLC can appropriately control this system.

Pancreatic cellular injury after cardiac surgery with cardiopulmonary bypass: frequency, time course and risk factors.

Science.gov (United States)

Nys, Monique; Venneman, Ingrid; Deby-Dupont, Ginette; Preiser, Jean-Charles; Vanbelle, Sophie; Albert, Adelin; Camus, Gérard; Damas, Pierre; Larbuisson, Robert; Lamy, Maurice

2007-05-01

Although often clinically silent, pancreatic cellular injury (PCI) is relatively frequent after cardiac surgery with cardiopulmonary bypass; and its etiology and time course are largely unknown. We defined PCI as the simultaneous presence of abnormal values of pancreatic isoamylase and immunoreactive trypsin (IRT). The frequency and time evolution of PCI were assessed in this condition using assays for specific exocrine pancreatic enzymes. Correlations with inflammatory markers were searched for preoperative risk factors. One hundred ninety-three patients submitted to cardiac surgery were enrolled prospectively. Blood IRT, amylase, pancreatic isoamylase, lipase, and markers of inflammation (alpha1-protease inhibitor, alpha2-macroglobulin, myeloperoxidase) were measured preoperatively and postoperatively until day 8. The postoperative increase in plasma levels of pancreatic enzymes and urinary IRT was biphasic in all patients: early after surgery and later (from day 4 to 8 after surgery). One hundred thirty-three patients (69%) experienced PCI, with mean IRT, isoamylase, and alpha1-protease inhibitor values higher for each sample than that in patients without PCI. By multiple regression analysis, we found preoperative values of plasma IRT >or=40 ng/mL, amylase >or=42 IU/mL, and pancreatic isoamylase >or=20 IU/L associated with a higher incidence of postsurgery PCI (P < 0.005). In the PCI patients, a significant correlation was found between the 4 pancreatic enzymes and urinary IRT, total calcium, myeloperoxidase, alpha1-protease inhibitor, and alpha2-macroglobulin. These data support a high prevalence of postoperative PCI after cardiac surgery with cardiopulmonary bypass, typically biphasic and clinically silent, especially when pancreatic enzymes were elevated preoperatively.

Imagery Rehearsal Therapy in Addition to Treatment as Usual for Patients With Diverse Psychiatric Diagnoses Suffering From Nightmares : A Randomized Controlled Trial

NARCIS (Netherlands)

van Schagen, Annette M; Lancee, Jaap|info:eu-repo/dai/nl/33304083X; de Groot, Izaäk W; Spoormaker, Victor I|info:eu-repo/dai/nl/304831298; van den Bout, Jan|info:eu-repo/dai/nl/071594094

OBJECTIVE: Nightmares are associated with psychopathology and daily distress. They are highly prevalent in a psychiatric population (30%). Currently, imagery rehearsal therapy (IRT) is the treatment of choice for nightmares. With IRT, the script of the nightmare is changed into a new dream, which is

Assessment of a Technique for Estimating Total Column Water Vapor Using Measurements of the Infrared Sky Temperature

Science.gov (United States)

Merceret, Francis J.; Huddleston, Lisa L.

2014-01-01

A method for estimating the integrated precipitable water (IPW) content of the atmosphere using measurements of indicated infrared zenith sky temperature was validated over east-central Florida. The method uses inexpensive, commercial off the shelf, hand-held infrared thermometers (IRT). Two such IRTs were obtained from a commercial vendor, calibrated against several laboratory reference sources at KSC, and used to make IR zenith sky temperature measurements in the vicinity of KSC and Cape Canaveral Air Force Station (CCAFS). The calibration and comparison data showed that these inexpensive IRTs provided reliable, stable IR temperature measurements that were well correlated with the NOAA IPW observations.

Effect of including decay chains on predictions of equilibrium-type terrestrial food chain models

International Nuclear Information System (INIS)

Kirchner, G.

1990-01-01

Equilibrium-type food chain models are commonly used for assessing the radiological impact to man from environmental releases of radionuclides. Usually these do not take into account build-up of radioactive decay products during environmental transport. This may be a potential source of underprediction. For estimating consequences of this simplification, the equations of an internationally recognised terrestrial food chain model have been extended to include decay chains of variable length. Example calculations show that for releases from light water reactors as expected both during routine operation and in the case of severe accidents, the build-up of decay products during environmental transport is generally of minor importance. However, a considerable number of radionuclides of potential radiological significance have been identified which show marked contributions of decay products to calculated contamination of human food and resulting radiation dose rates. (author)

The person response function as a tool in person-fit research

NARCIS (Netherlands)

Sijtsma, Klaas; Meijer, R.R.

2001-01-01

Item responses that do not fit an item response theory (IRT) model may cause the latent trait value to be inaccurately estimated. In the past two decades several statistics have been proposed that can be used to identify nonfitting item score patterns. These statistics all yieldscalar values. Here,

Conversion of Reactor LVR-15 in Czech Republic from HEU to LEU Fuel

Energy Technology Data Exchange (ETDEWEB)

Broz, V.; Miletic, M.; Koleska, M.; Ernest, J.; Vins, M. [Research Reactors, Research Centre Rez Ltd., Husinec-Rez 130, CZ 250 68 (Czech Republic)

2011-07-01

Accordingly to the IAEA recommendations and RERTR program, the LVR-15 reactor started the process of conversion from fuel enriched to 36 % to fuel enriched up to 20 % U{sup 235}. As the most suitable fuel for the reactor was chosen the IRT-4M fuel enriched to 19.7% U{sup 235}, fabricated in NZCHK Novosibirsk. The most important requirements, the fuel had to fulfill, were attainability, constructional continuity with the old type of FAs and operational experiences. The conversion procedure began in January 2010 with testing irradiation of 3 IRT-4M FAs. Test irradiation took 9 reactor operation cycles. During this period were done visual inspection and sipping tests of FAs. An experiment with the aim to compare the influence of the fuel changing to neutron flux and the reactivity and to verify basic physical characteristics of the new fuel was performed at the start of test irradiation. The conversion itself is going on since January 2011. In this time, every cycle will be replaced 1 or 2 burned-up IRT-2M FAs with fresh IRT-4M FAs. This period will take 14 cycles and at the end should be in the core used only IRT-4M fuel. (author)

The application and evaluation of insulin release test and quantitative parameter in diabetic type II

International Nuclear Information System (INIS)

Huang Chenggang; Chen Xiaoyan; Guan Xiaofeng

2002-01-01

Objective: To analyse the curve of Insulin Release Test (IRT) about the patients whit type II diabetes, to evaluate β-cell function and the sensitivity of body to Insulin using Insulin Release Index (IRI) and Insulin Sensitivity Index (ISI), and to probe the value for clinical therapy. Methods: 1) Have a IRT of 396 cases with type II diabetes and 17 normal bodies and acquire the IRT curve, 2) Design the count methods about IRI and ISI, IRI = Ins max/Ins FBI x Δ Ins max/T max (minute), ISI=(Ins max-Ins FBI)/(Ins 180'-Ins FBI), 3) Compare IRI Changes of before and after treatment for 12 cases with no insulin release and 9 cases with less insulin release. Results: IRT curve type (No release type 21.0%, less release type 33.3%, peak delay type 36.9%, high insulin type 6.0%, release delay type 2.8%); respective IRI, ISI compared to normal, P<0.01; IRI of before and after treatment with insulin P<0.01. Conclusions: IRT Curve combining IRI and ISI can reflect accurately β-cell function with type II diabetes and the sensitivity of body to insulin, Also it has some reference value for clinical therapy

Modelling of Water Cooled Fuel Including Design Basis and Severe Accidents. Proceedings of a Technical Meeting

International Nuclear Information System (INIS)

2015-11-01

The demands on nuclear fuel have recently been increasing, and include transient regimes, higher discharge burnup and longer fuel cycles. This has resulted in an increase of loads on fuel and core internals. In order to satisfy these demands while ensuring compliance with safety criteria, new national and international programmes have been launched and advanced modelling codes are being developed. The Fukushima Daiichi accident has particularly demonstrated the need for adequate analysis of all aspects of fuel performance to prevent a failure and also to predict fuel behaviour were an accident to occur.This publication presents the Proceedings of the Technical Meeting on Modelling of Water Cooled Fuel Including Design Basis and Severe Accidents, which was hosted by the Nuclear Power Institute of China (NPIC) in Chengdu, China, following the recommendation made in 2013 at the IAEA Technical Working Group on Fuel Performance and Technology. This recommendation was in agreement with IAEA mid-term initiatives, linked to the post-Fukushima IAEA Nuclear Safety Action Plan, as well as the forthcoming Coordinated Research Project (CRP) on Fuel Modelling in Accident Conditions. At the technical meeting in Chengdu, major areas and physical phenomena, as well as types of code and experiment to be studied and used in the CRP, were discussed. The technical meeting provided a forum for international experts to review the state of the art of code development for modelling fuel performance of nuclear fuel for water cooled reactors with regard to steady state and transient conditions, and for design basis and early phases of severe accidents, including experimental support for code validation. A round table discussion focused on the needs and perspectives on fuel modelling in accident conditions. This meeting was the ninth in a series of IAEA meetings, which reflects Member States’ continuing interest in nuclear fuel issues. The previous meetings were held in 1980 (jointly with

Modeling the World Health Organization Disability Assessment Schedule II using non-parametric item response models.

Science.gov (United States)

Galindo-Garre, Francisca; Hidalgo, María Dolores; Guilera, Georgina; Pino, Oscar; Rojo, J Emilio; Gómez-Benito, Juana

2015-03-01

The World Health Organization Disability Assessment Schedule II (WHO-DAS II) is a multidimensional instrument developed for measuring disability. It comprises six domains (getting around, self-care, getting along with others, life activities and participation in society). The main purpose of this paper is the evaluation of the psychometric properties for each domain of the WHO-DAS II with parametric and non-parametric Item Response Theory (IRT) models. A secondary objective is to assess whether the WHO-DAS II items within each domain form a hierarchy of invariantly ordered severity indicators of disability. A sample of 352 patients with a schizophrenia spectrum disorder is used in this study. The 36 items WHO-DAS II was administered during the consultation. Partial Credit and Mokken scale models are used to study the psychometric properties of the questionnaire. The psychometric properties of the WHO-DAS II scale are satisfactory for all the domains. However, we identify a few items that do not discriminate satisfactorily between different levels of disability and cannot be invariantly ordered in the scale. In conclusion the WHO-DAS II can be used to assess overall disability in patients with schizophrenia, but some domains are too general to assess functionality in these patients because they contain items that are not applicable to this pathology. Copyright © 2014 John Wiley & Sons, Ltd.

Refining a self-assessment of informatics competency scale using Mokken scaling analysis.

Science.gov (United States)

Yoon, Sunmoo; Shaffer, Jonathan A; Bakken, Suzanne

2015-01-01

Healthcare environments are increasingly implementing health information technology (HIT) and those from various professions must be competent to use HIT in meaningful ways. In addition, HIT has been shown to enable interprofessional approaches to health care. The purpose of this article is to describe the refinement of the Self-Assessment of Nursing Informatics Competencies Scale (SANICS) using analytic techniques based upon item response theory (IRT) and discuss its relevance to interprofessional education and practice. In a sample of 604 nursing students, the 93-item version of SANICS was examined using non-parametric IRT. The iterative modeling procedure included 31 steps comprising: (1) assessing scalability, (2) assessing monotonicity, (3) assessing invariant item ordering, and (4) expert input. SANICS was reduced to an 18-item hierarchical scale with excellent reliability. Fundamental skills for team functioning and shared decision making among team members (e.g. "using monitoring systems appropriately," "describing general systems to support clinical care") had the highest level of difficulty, and "demonstrating basic technology skills" had the lowest difficulty level. Most items reflect informatics competencies relevant to all health professionals. Further, the approaches can be applied to construct a new hierarchical scale or refine an existing scale related to informatics attitudes or competencies for various health professions.