WorldWideScience

Sample records for iron-titanium lanthanum-nickel magnesium-copper

  1. Process for obtaining cobalt and lanthanum nickelate

    International Nuclear Information System (INIS)

    Tapcov, V.; Samusi, N.; Gulea, A.; Horosun, I.; Stasiuc, V.; Petrenco, P.

    1999-01-01

    The invention relates to the process for obtaining polycrystalline ceramics of cobalt and lanthanum nickelate with the perovskite structure from coordinative hetero metallic compounds. The obtained products can be utilized in the industry in the capacity of catalysts. Summary of the invention consists in obtaining polycrystalline ceramics LaCoO 3 and LaNiO 3 with the perovskite structure by pyrolysis of the parent compounds, namely, the coordinative hetero metallic compounds of the lanthanum cobalt or lanthanum nickel. The pyrolysis of the parent compound runs during one hour at 800 C. The technical result of the invention consists in lowering the temperature of the parent compound pyrolysis containing the precise ratio of metals necessary for ceramics obtaining

  2. Phases in lanthanum-nickel-aluminum alloys

    International Nuclear Information System (INIS)

    Mosley, W.C.

    1992-01-01

    Lanthanum-nickel-aluminum (LANA) alloys will be used to pump, store and separate hydrogen isotopes in the Replacement Tritium Facility (RTF). The aluminum content (y) of the primary LaNi 5 -phase is controlled to produce the desired pressure-temperature behavior for adsorption and desorption of hydrogen. However, secondary phases cause decreased capacity and some may cause undesirable retention of tritium. Twenty-three alloys purchased from Ergenics, Inc. for development of RTF processes have been characterized by scanning electron microscopy (SEM) and by electron microprobe analysis (EMPA) to determine the distributions and compositions of constituent phases. This memorandum reports the results of these characterization studies. Knowledge of the structural characteristics of these alloys is a useful first step in selecting materials for specific process development tests and in interpreting results of those tests. Once this information is coupled with data on hydrogen plateau pressures, retention and capacity, secondary phase limits for RTF alloys can be specified

  3. Thermochemically active iron titanium oxide materials

    Energy Technology Data Exchange (ETDEWEB)

    Coker, Eric Nicholas; Miller, James E.

    2018-01-16

    A thermal oxidation-reduction cycle is disclosed that uses iron titanium oxide as the reactive material. The cycle may be used for the thermal splitting of water and/or carbon dioxide to form hydrogen and/or carbon monoxide. The formed compounds may be used as syngas precursors to form fuels.

  4. Leaching behavior of lanthanum, nickel and iron from spent catalyst using inorganic acids

    Science.gov (United States)

    Astuti, W.; Prilitasari, N. M.; Iskandar, Y.; Bratakusuma, D.; Petrus, H. T. B. M.

    2018-01-01

    Highly technological applications of rare earth metals (REs) and scarcity of supply have become an incentive torecover the REs from various resources, which include high grade and low grade ores, as well as recycledwaste materials. Spent hydrocracking catalyst contain lanthanum and a variety of valuable metals such as nickel and iron. This study investigated the recovery of lanthanum, nickel and iron from spent hydrocracking catalyst by leaching using various inorganic acid (sulfuric acid, hydrochloric acid, and nitric acid). The effect of acid concentration, type of acid and leaching temperature was conducted to study the leaching behavior of each valuable metal from spent-catalyst. It has been shown that it is possible to recover more than 90% of lanthanum, however the leaching efficiency of nickel and iron in this process was very low. It can be concluded that the leaching process is selective for lanthanum recovery from hydrocracking spent-catalyst.

  5. Iron-titanium-mischmetal alloys for hydrogen storage

    Science.gov (United States)

    Sandrock, Gary Dale

    1978-01-01

    A method for the preparation of an iron-titanium-mischmetal alloy which is used for the storage of hydrogen. The alloy is prepared by air-melting an iron charge in a clay-graphite crucible, adding titanium and deoxidizing with mischmetal. The resultant alloy contains less than about 0.1% oxygen and exhibits a capability for hydrogen sorption in less than half the time required by vacuum-melted, iron-titanium alloys.

  6. Nickel/carbon core/shell nanotubes: Lanthanum nickel alloy catalyzed synthesis, characterization and studies on their ferromagnetic and lithium-ion storage properties

    International Nuclear Information System (INIS)

    Anthuvan Rajesh, John; Pandurangan, Arumugam; Senthil, Chenrayan; Sasidharan, Manickam

    2014-01-01

    Highlights: • Ni/CNTs core/shell structure was synthesized using LaNi 5 alloy catalyst by CVD. • The magnetic and lithium-ion storage properties of Ni/CNTs structure were studied. • The specific Ni/CNTs structure shows strong ferromagnetic property with large coercivity value of 446.42 Oe. • Ni/CNTs structure shows enhanced electrochemical performance in terms of stable capacity and better rate capability. - Abstract: A method was developed to synthesize ferromagnetic nickel core/carbon shell nanotubes (Ni/CNTs) by chemical vapor deposition using Pauli paramagnetic lanthanum nickel (LaNi 5 ) alloy both as a catalyst and as a source for the Ni-core. The Ni-core was obtained through oxidative dissociation followed by hydrogen reduction during the catalytic growth of the CNTs. Transmission electron microscopy (TEM), selected area electron diffraction (SAED) and X-ray diffraction (XRD) analyses reveal that the Ni-core exists as a face centered cubic single crystal. The magnetic hysteresis loop of Ni/CNTs particle shows increased coercivity (446.42 Oe) than bulk Ni at room temperature. Furthermore, the Ni/CNTs core/shell particles were investigated as anode materials in lithium-ion batteries. The Ni/CNTs electrode delivered a high discharge capacity of 309 mA h g −1 at 0.2 C, and a stable cycle-life, which is attributed to high structural stability of Ni/CNTs electrode during electrochemical lithium-ion insertion and de-insertion redox reactions

  7. Nuclear power plant

    International Nuclear Information System (INIS)

    Aisaka, Tatsuyoshi; Kamahara, Hisato; Yanagisawa, Ko.

    1982-01-01

    Purpose: To prevent corrosion stress cracks in structural materials in a BWR type nuclear power plant by decreasing the oxygen concentration in the reactor coolants. Constitution: A hydrogen injector is connected between the condensator and a condensate clean up system of a nuclear power plant. The injector is incorporated with hydrogenated compounds formed from metal hydrides, for example, of alloys such as lanthanum-nickel alloy, iron titanium alloy, vanadium, palladium, magnesium-copper alloy, magnesium-nickel alloy and the like. Even if the pressure of hydrogen obtained from a hydrogen bomb or by way of water electrolysis is changed, the hydrogen can always be injected into a reactor coolant at a pressure equal to the equilibrium dissociation pressure for metal hydride by introducing the hydrogen into the hydrogen injector. (Seki, T.)

  8. Photocatalytic action of cerium molybdate and iron-titanium oxide hollow nanospheres on Escherichia coli

    Energy Technology Data Exchange (ETDEWEB)

    Kartsonakis, I. A., E-mail: ikartsonakis@ims.demokritos.gr; Kontogiani, P.; Pappas, G. S.; Kordas, G. [NCSR ' DEMOKRITOS' , Sol-Gel Laboratory, Institute of Advanced Materials, Physicochemical Processes, Nanotechnology and Microsystems (Greece)

    2013-06-15

    This study is focused on the production of hollow nanospheres that reveal antibacterial action. Cerium molybdate and iron-titanium oxide hollow nanospheres with a diameter of 175 {+-} 15 and 221 {+-} 10 nm, respectively, were synthesized using emulsion polymerization and the sol-gel process. Their morphology characterization was accomplished using scanning electron microscopy. Their antibacterial action was examined on pure culture of Escherichia coli considering the loss of their viability. Both hollow nanospheres presented photocatalytic action after illumination with blue-black light, but those of cerium molybdate also demonstrated photocatalytic action in the dark. Therefore, the produced nanospheres can be used for antibacterial applications.

  9. Photocatalytic action of cerium molybdate and iron-titanium oxide hollow nanospheres on Escherichia coli

    International Nuclear Information System (INIS)

    Kartsonakis, I. A.; Kontogiani, P.; Pappas, G. S.; Kordas, G.

    2013-01-01

    This study is focused on the production of hollow nanospheres that reveal antibacterial action. Cerium molybdate and iron-titanium oxide hollow nanospheres with a diameter of 175 ± 15 and 221 ± 10 nm, respectively, were synthesized using emulsion polymerization and the sol–gel process. Their morphology characterization was accomplished using scanning electron microscopy. Their antibacterial action was examined on pure culture of Escherichia coli considering the loss of their viability. Both hollow nanospheres presented photocatalytic action after illumination with blue–black light, but those of cerium molybdate also demonstrated photocatalytic action in the dark. Therefore, the produced nanospheres can be used for antibacterial applications.

  10. Template-assisted hydrothermally synthesized iron-titanium binary oxides and their application as catalysts for ethyl acetate oxidation

    Czech Academy of Sciences Publication Activity Database

    Tsoncheva, T.; Ivanova, R.; Dimitrov, M.; Paneva, D.; Kovacheva, D.; Henych, Jiří; Vomáčka, Petr; Kormunda, M.; Velinov, N.; Mitov, I.; Štengl, Václav

    2016-01-01

    Roč. 528, NOV (2016), s. 24-35 ISSN 0926-860X R&D Projects: GA MŠk(CZ) LM2015073 Institutional support: RVO:61388980 Keywords : Effect of Fe/Ti ratio and temperature of hydrothermal treatment * Hydrothermal synthesis * Iron-titanium binary oxides Subject RIV: CA - Inorganic Chemistry Impact factor: 4.339, year: 2016

  11. Evaluation of exploitation alternatives of iron - titanium - vanadium ore from Campo Alegre de Lourdes (Bahia-Brazil)

    International Nuclear Information System (INIS)

    Cassa, J.C.S.; Ogasawara, T.; Silva, F.T. da; Cuellar, O.D.

    1987-01-01

    An evaluation of experiences carried out in order to develop an economic process for vanadium, is presented. The attempts which are being developed in the Metallurgical Engineering Program at COPPE/UFRJ, are described, and the other technical and economical possibilities of existing technologies, are analysed. The advantages and disadvantages of integrated steel making process to recover iron, titanium and vanadium contained in the ore from Campo Alegre de Lourdes deposit, in Bahia-Brazil are considered. (Author) [pt

  12. Free energy of formation of lanthanum nickelate

    International Nuclear Information System (INIS)

    Sreedharan, O.M.; Chandrasekharaiah, M.S.; Karkhanavala, M.D.

    1976-01-01

    The ΔG 0 /sub f/ of La 2 NiO 4 (s) was determined from the measured emf in the range 1123 to 1373 0 K of the solid oxide electrolyte galvanic cell. The emf data were fitted to a linear equation by the method of least squares. From these data, the standard free-energy change, ΔG 0 , for the reaction NiO(s) + La 2 O 3 (s) = La 2 NiO 4 (s) was calculated. Combining these emf data with the best available free energy of formation data for NiO(s) and La 2 O 3 (s), the following expression for ΔG 0 /sub f/(La 2 NiO 4 (s)) was derived as ΔG 0 /sub f/(La 2 NiO 4 (s)/kJ mole -1 = -2057.0 + 322.8 x 10 -3 T +- 17.30

  13. Biochemistry of the normal dura mater of the human brain determination of water, sodium, potassium, calcium, phosphorus, magnesium, copper, iron, sulfur and nitrogen contents

    Directory of Open Access Journals (Sweden)

    Horacio M. Canelas

    1969-06-01

    Full Text Available The concentrations of water, sodium, potassium, calcium, phosphorus, magnesium, copper, iron, sulfur, and nitrogen were determined in samples of apparently normal dura mater removed from 18 subjects recently dead by craniocerebral trauma. The average concentrations expressed in dry weight were: water 79.55 g/100 g ± 2.52; sodium 1.63 mequiv/100 g ±0.27; potassium 3.68 mequiv/100 g ± 0.66; calcium 119.84 mg/100 g ± 107.40; phosphorus 68.2 mg/100 g ± 34.5; magnesium 0.61 mequiv/100 g ± 0.37; copper 249.8 /xg/100 g ± 109.4; iron 0.82 mg/100 g ± 0.28; sulfur 490.7 mg/100 g ± 22.5; nitrogen 3.33 g/100 g ± 0.17.

  14. A deposit model for magmatic iron-titanium-oxide deposits related to Proterozoic massif anorthosite plutonic suites

    Science.gov (United States)

    Woodruff, Laurel G.; Nicholson, Suzanne W.; Fey, David L.

    2013-01-01

    This descriptive model for magmatic iron-titanium-oxide (Fe-Ti-oxide) deposits hosted by Proterozoic age massif-type anorthosite and related rock types presents their geological, mineralogical, geochemical, and geoenvironmental attributes. Although these Proterozoic rocks are found worldwide, the majority of known deposits are found within exposed rocks of the Grenville Province, stretching from southwestern United States through eastern Canada; its extension into Norway is termed the Rogaland Anorthosite Province. This type of Fe-Ti-oxide deposit dominated by ilmenite rarely contains more than 300 million tons of ore, with between 10- to 45-percent titanium dioxide (TiO2), 32- to 45-percent iron oxide (FeO), and less than 0.2-percent vanadium (V). The origin of these typically discordant ore deposits remains as enigmatic as the magmatic evolution of their host rocks. The deposits clearly have a magmatic origin, hosted by an age-constrained unique suite of rocks that likely are the consequence of a particular combination of tectonic circumstances, rather than any a priori temporal control. Principal ore minerals are ilmenite and hemo-ilmenite (ilmenite with extensive hematite exsolution lamellae); occurrences of titanomagnetite, magnetite, and apatite that are related to this deposit type are currently of less economic importance. Ore-mineral paragenesis is somewhat obscured by complicated solid solution and oxidation behavior within the Fe-Ti-oxide system. Anorthosite suites hosting these deposits require an extensive history of voluminous plagioclase crystallization to develop plagioclase-melt diapirs with entrained Fe-Ti-rich melt rising from the base of the lithosphere to mid- and upper-crustal levels. Timing and style of oxide mineralization are related to magmatic and dynamic evolution of these diapiric systems and to development and movement of oxide cumulates and related melts. Active mines have developed large open pits with extensive waste-rock piles, but

  15. A deposit model for magmatic iron-titanium-oxide deposits related to Proterozoic massif anorthosite plutonic suites: Chapter K in Mineral Deposit Models for Resource Assessment

    Science.gov (United States)

    Woodruff, Laurel G.; Nicholson, Suzanne W.; Fey, David L.

    2013-01-01

    This descriptive model for magmatic iron-titanium-oxide (Fe-Ti-oxide) deposits hosted by Proterozoic age massif-type anorthosite and related rock types presents their geological, mineralogical, geochemical, and geoenvironmental attributes. Although these Proterozoic rocks are found worldwide, the majority of known deposits are found within exposed rocks of the Grenville Province, stretching from southwestern United States through eastern Canada; its extension into Norway is termed the Rogaland Anorthosite Province. This type of Fe-Ti-oxide deposit dominated by ilmenite rarely contains more than 300 million tons of ore, with between 10- to 45-percent titanium dioxide (TiO2), 32- to 45-percent iron oxide (FeO), and less than 0.2-percent vanadium (V).

  16. Hydrogen storage as a hydride. Citations from the International Aerospace Abstracts data base

    Science.gov (United States)

    Zollars, G. F.

    1980-01-01

    These citations from the international literature concern the storage of hydrogen in various metal hydrides. Binary and intermetallic hydrides are considered. Specific alloys discussed are iron titanium, lanthanium nickel, magnesium copper and magnesium nickel among others.

  17. A novel process for recovery of iron, titanium, and vanadium from titanomagnetite concentrates: NaOH molten salt roasting and water leaching processes

    International Nuclear Information System (INIS)

    Chen, Desheng; Zhao, Longsheng; Liu, Yahui; Qi, Tao; Wang, Jianchong; Wang, Lina

    2013-01-01

    Highlights: ► The conversion of titanium is 96.6% in the rich titanium–vanadium slag. ► MgTi 2 O 5 and M 3 O 5 (M = Ti, Mg, Fe) were converted to Na 2 TiO 3 and NaMO 2 , respectively. ► Na 2 TiO 3 is converted to undefined structure of H 2 TiO 3 . ► NaMO 2 is converted to α-NaFeO 2 -type structure of HMO 2 . ► 87.3% of sodium, 42.3% of silicon, 43.2% of aluminum, 22.8% of manganese and 96.6% of vanadium were leached out. -- Abstract: A novel process for recovering iron, titanium, and vanadium from titanomagnetite concentrates has been developed. In the present paper, the treatment of rich titanium–vanadium slag by NaOH molten salt roasting and water leaching processes is investigated. In the NaOH molten salt roasting process, the metallic iron is oxidized into ferriferous oxide, MgTi 2 O 5 is converted to NaCl-type structure of Na 2 TiO 3 , and M 3 O 5 (M = Ti, Mg, Fe) is converted to α-NaFeO 2 -type structure of NaMO 2 , respectively. Roasting temperature and NaOH–slag mass ratio played a considerable role in the conversion of titanium in the rich titanium–vanadium slag during the NaOH molten salt roasting process. Roasting at 500 °C for 60 min and a 1:1 NaOH–slag mass ratio produces 96.3% titanium conversion. In the water leaching process, the Na + was exchanged with H + , Na 2 TiO 3 is converted to undefined structure of H 2 TiO 3 , and NaMO 2 is converted to α-NaFeO 2 -type structure of HMO 2 . Under the optimal conditions, 87.3% of the sodium, 42.3% of the silicon, 43.2% of the aluminum, 22.8% of the manganese, and 96.6% of the vanadium are leached out

  18. Iron-titanium oxide minerals and magnetic susceptibility anomalies in the Mariano Lake-Lake Valley cores - Constraints on conditions of uranium mineralization in the Morrison Formation, San Juan Basin, New Mexico

    International Nuclear Information System (INIS)

    Reynolds, R.L.; Fishman, N.S.; Scott, J.H.; Hudson, M.R.

    1986-01-01

    Petrographic study of the Mariano Lake-Lake Valley cores reveals three distinct zones of postdepositional alteration of detrital Fe-Ti (iron-titanium) oxide minerals in the Westwater Canyon Member of the Upper Jurassic Morrisson Formation. In the uranium-bearing and adjacent portions of the Westwater Canyon, these detrital Fe-Ti oxide minerals have been thoroughly altered by leaching of iron. Stratigraphically lower parts of the Westwater Canyon and the underlying Recapture Member are characterized by preservation of Fe-Ti oxide grains, primarily magnetite and ilmenite, and of hematite, and by an absence or uranium concentrations. Partly destroyed Fe-Ti oxide minerals occupy an interval between the zones of destruction and preservation. Alteration patterns of the Fe-Ti oxide minerals are reflected in bore-hole magnetic susceptibility logs. Magnetic susceptibility response in the upper parts of the Westwater Canyon Member is flat and uniformly <500 μSI units, but at greater depths it fluctuates sharply, from <1,000 to nearly 8,000 μSI units. The boundary between uniformly low and high magnetic susceptibility response corresponds closely to the interval that divides the zone of completely altered from the zone of preserved detrital Fe-Ti oxide minerals. The alteration pattern suggests that solutions responsible for destruction of the Fe-ti oxide minerals originated in the overlying Brushy Basin Member of the Morrison Formation. Previous studies indicate that these solutions were rich in soluble organic matter and perhaps in uranium. Uranium precipitation may have been controlled by a vertically fluctuation interface between organic-rich solutions and geochemically different fluids in which the detrital Fe-Ti oxide minerals were preserved

  19. Iron titanium manganase alloy hydrogen storage

    Science.gov (United States)

    Reilly, James J.; Wiswall, Jr., Richard H.

    1979-01-01

    A three component alloy capable of reversible sorption of hydrogen having the chemical formula TiFe.sub.1-x Mn.sub.x where x is in the range of about 0.02 to 0.5 and the method of storing hydrogen using said alloy.

  20. Sr-doped Lanthanum Nickelate Nanofibers for High Energy Density Supercapacitors

    International Nuclear Information System (INIS)

    Cao, Yi; Lin, Baoping; Sun, Ying; Yang, Hong; Zhang, Xueqin

    2015-01-01

    Highlights: • The electrode made by LNF-0.7 possessed excellent performance (719 F g −1 ) at Na 2 SO 4 electrolyte • LNF-0.7//LNF-0.7 symmetric supercapacitor device were firstly prepared • The maximum energy density of 81.4 Wh·kg −1 are achieved at a power density of 500W·kg −1 • This symmetric supercapacitor also shows an excellent cycling life - Abstract: The series La x Sr 1−x NiO 3−δ (0.3≤x≤1) nanofibers (LNF-x) samples are prepared by using electrospun method. We investigate the structure and the electrochemical properties of LNF-x in detail. As a result, LNF-x nanofibers present a perovskite structure, and the LNF-0.7 sample with high specific surface area display remarkable performance as an electrode material for supercapacitors. The maximum specific capacitance value of 719 F·g −1 at a current density of 2 A·g −1 , which retains 505 F·g −1 at a high current density of 20 A·g −1 , is obtained for LNF-0.7 electrode in 1 M Na 2 SO 4 aqueous electrolyte. Moreover, the LNF-0.7//LNF-0.7 symmetric supercapacitor device using 1 M Na 2 SO 4 aqueous solution is successfully demonstrated. The capacitor device can operate at a cell voltage as high as 2 V, and it exhibits an energy density of 30.5 Wh·kg −1 at a high power density of 10 kW·kg −1 and a high energy density of 81.4 Wh·kg −1 at a low power density of 500 W·kg −1 . More importantly, this symmetric supercapacitor also shows an excellent cycling performance with 90% specific capacitance retention after 2000 charging and discharging cycles. Those results offer a suitable design of electrode materials for high-performance supercapacitors

  1. Biochemistry of the normal dura mater of the human brain determination of water, sodium, potassium, calcium, phosphorus, magnesium, copper, iron, sulfur and nitrogen contents Estudo bioquímico da dura mater normal do cérebro humano: conteúdo de água, sódio, potássio, cálcio, fósforo, magnésio, cobre ferro, enxôfre e nitrogênio

    Directory of Open Access Journals (Sweden)

    Horacio M. Canelas

    1969-06-01

    Full Text Available The concentrations of water, sodium, potassium, calcium, phosphorus, magnesium, copper, iron, sulfur, and nitrogen were determined in samples of apparently normal dura mater removed from 18 subjects recently dead by craniocerebral trauma. The average concentrations expressed in dry weight were: water 79.55 g/100 g ± 2.52; sodium 1.63 mequiv/100 g ±0.27; potassium 3.68 mequiv/100 g ± 0.66; calcium 119.84 mg/100 g ± 107.40; phosphorus 68.2 mg/100 g ± 34.5; magnesium 0.61 mequiv/100 g ± 0.37; copper 249.8 /xg/100 g ± 109.4; iron 0.82 mg/100 g ± 0.28; sulfur 490.7 mg/100 g ± 22.5; nitrogen 3.33 g/100 g ± 0.17.Foram determinadas as concentrações de água, sódio, potássio, cálcio, fósforo, magnésio, cobre, ferro, enxôfre e nitrogênio de espécimes de dura máter aparentemente normal retirados de 18 indivíduos recentemente falecidos em conseqüência de traumatismo crânio-encefálico. As concentrações médias, expressas em peso seco, foram as seguintes: água 79,55 g/100 g ± 2,52; sódio 1,63 mequiv/100 g ± 0,27; potássio 3,68 mequiv/100 g ± 0,66; cálcio 119,84 mg/100 g ± 107,40; fósforo 68,2 mg/100 g ± 34,5; magnésio 0,61 mequiv/100 g ± 0,37; cobre 249,8 mg/100 ± 109,4; ferro 0,82 mg/100 g ± 0,28; enxôfre 490,7 mg/100 g ± 22,5; nitrogênio 3,33 g/100 g ± 0,17.

  2. Synthesis and characterization of Co-doped lanthanum nickelate perovskites for solid oxide fuel cell cathode material

    International Nuclear Information System (INIS)

    Chavez G, L.; Hinojosa R, M.; Medina L, B.; Ringuede, A.; Cassir, M.; Vannier, R. N.

    2017-01-01

    In the perovskite structures widely investigated and used as solid oxide fuel cells cathodes, oxygen reduction is mainly limited to the triple phase boundary (TPB), where oxygen (air), electrode and electrolyte are in contact. It is possible via the sol-gel modified Pechini method to: 1) control the material grain size, which can increase TPBs, 2) produce a homogenous material and 3) obtain a cathode material in a faster way compared with the solid state route. LaNi_xCo_1_-_xO_3 (x = 0.3, 0.5, 0.7) were synthesized by the modified Pechini method. The perovskite phase formation began at 350 degrees Celsius and the presence of pure LaNi_0_._7Co_0_._3O_3, LaNi_0_._5Co_0_._5O_3 and LaNi_0_._3Co_0_._7O_3 structures was evidenced by high temperature X-ray diffraction (Ht-XRD) measurements. Scanning electron microscopy (Sem) micrographs showed that the microstructure evolves with the amount of cobalt from a coalesced to an open structure. Electrochemical impedance spectroscopy (EIS) on symmetrical cells LaNi_xCo_1_-_xO_3/YSZ (Yttria-stabilized zirconia)/LaNi_xCo_1_-_xO_3 showed that the highest ASR (area specific resistance) is obtained with x = 0.3, whereas ASR values are similar for x = 0.5 and 0.7 at temperatures higher than 600 degrees Celsius. At temperatures lower than 600 degrees Celsius, ASR is the lowest for LaNi_0_._5Co_0_._5O_3, showing that this composition with intermediate porosity appears as a good choice for and intermediate-temperature solid oxid fuel cell. (Author)

  3. Synthesis and characterization of Co-doped lanthanum nickelate perovskites for solid oxide fuel cell cathode material

    Energy Technology Data Exchange (ETDEWEB)

    Chavez G, L.; Hinojosa R, M. [Universidad Autonoma de Nuevo Leon, Ciudad Universitaria, San Nicolas de los Garza, 66450 Nuevo Leon (Mexico); Medina L, B.; Ringuede, A.; Cassir, M. [Institut de Recherche de Chimie Paris, CNRS-Chimie ParisTech, 11 rue Pierre et Marie Curie, 75005 Paris (France); Vannier, R. N., E-mail: leonardo.chavezgr@uanl.edu.mx [Unite de Catalyse et de Chimie du Solide, UMR 8181 CNRS, 59655, Villeneuve d Ascq Cedex (France)

    2017-11-01

    In the perovskite structures widely investigated and used as solid oxide fuel cells cathodes, oxygen reduction is mainly limited to the triple phase boundary (TPB), where oxygen (air), electrode and electrolyte are in contact. It is possible via the sol-gel modified Pechini method to: 1) control the material grain size, which can increase TPBs, 2) produce a homogenous material and 3) obtain a cathode material in a faster way compared with the solid state route. LaNi{sub x}Co{sub 1-x}O{sub 3} (x = 0.3, 0.5, 0.7) were synthesized by the modified Pechini method. The perovskite phase formation began at 350 degrees Celsius and the presence of pure LaNi{sub 0.7}Co{sub 0.3}O{sub 3}, LaNi{sub 0.5}Co{sub 0.5}O{sub 3} and LaNi{sub 0.3}Co{sub 0.7}O{sub 3} structures was evidenced by high temperature X-ray diffraction (Ht-XRD) measurements. Scanning electron microscopy (Sem) micrographs showed that the microstructure evolves with the amount of cobalt from a coalesced to an open structure. Electrochemical impedance spectroscopy (EIS) on symmetrical cells LaNi{sub x}Co{sub 1-x}O{sub 3}/YSZ (Yttria-stabilized zirconia)/LaNi{sub x}Co{sub 1-x}O{sub 3} showed that the highest ASR (area specific resistance) is obtained with x = 0.3, whereas ASR values are similar for x = 0.5 and 0.7 at temperatures higher than 600 degrees Celsius. At temperatures lower than 600 degrees Celsius, ASR is the lowest for LaNi{sub 0.5}Co{sub 0.5}O{sub 3}, showing that this composition with intermediate porosity appears as a good choice for and intermediate-temperature solid oxid fuel cell. (Author)

  4. Samarium-cobalt-copper-iron-titanium permanent magnets

    International Nuclear Information System (INIS)

    Inomata, K.; Yamada, M.

    1980-01-01

    A permanent magnet, which comprises a composition containing a Sm-Co compound and consisting essentially of 23 to 30 wt.% of Sm, 0.2 to 1.5 wt.% Ti, 9 to 13 wt., Cu, 3 to 12 wt.% Fe and the balance Co, said magnet having a residual flux density (Br) of about 10 (kG), a coercive force (IC) of about 8 (KOe) and a maximum energy product (BH max) of about 25 (MGOe), having the aforesaid magnetic properties without the necessity of an ageing treatment

  5. Neutron diffraction study of α-iron titanium cerium hydride

    International Nuclear Information System (INIS)

    Lin Hong; Niu Shiwen; Gou Cheng

    1987-01-01

    The results of the neutron scattering method shows that the crystal structure of Fe 0.94 TiCe 0.06 H 0.03 is the same as that of the FeTiH 0.02 . However, its diffraction peak intensities drop by 47-58%, the background increased markedly about 2 times and the lattice constant increase by 5%

  6. The equilibrium phase diagram of the magnesium-copper-yttrium system

    International Nuclear Information System (INIS)

    Mezbahul-Islam, Mohammad; Kevorkov, Dmytro; Medraj, Mamoun

    2008-01-01

    Thermodynamic modelling of the Mg-Cu-Y system is carried out as a part of thermodynamic database construction for Mg alloys. This system is being modelled for the first time using the modified quasichemical model which considers the presence of short range ordering in the liquid. A self-consistent thermodynamic database for the Mg-Cu-Y system was constructed by combining the thermodynamic descriptions of the constituent binaries, Mg-Cu, Cu-Y, and Mg-Y. All the three binaries have been re-optimized based on the experimental phase equilibrium and thermodynamic data available in the literature. The constructed database is used to calculate and predict thermodynamic properties, the binary phase diagrams and liquidus projections of the ternary Mg-Cu-Y system. The current calculation results are in good agreement with the experimental data reported in the literature

  7. Unusual behavior in magnesium-copper cluster matter produced by helium droplet mediated deposition

    Energy Technology Data Exchange (ETDEWEB)

    Emery, S. B., E-mail: samuel.emery@navy.mil; Little, B. K. [University of Dayton Research Institute, 300 College Park, Dayton, Ohio 45469 (United States); Air Force Research Laboratory, Munitions Directorate, 2306 Perimeter Rd., Eglin AFB, Florida 32542 (United States); Xin, Y. [National High Magnetic Field Laboratory, Florida State University, Tallahassee, Florida 32310 (United States); Ridge, C. J.; Lindsay, C. M. [Air Force Research Laboratory, Munitions Directorate, 2306 Perimeter Rd., Eglin AFB, Florida 32542 (United States); Buszek, R. J. [ERC Inc., Edwards AFB, California 93524 (United States); Boatz, J. A. [Air Force Research Laboratory, Aerospace System Directorate, Edwards AFB, California 93524 (United States); Boyle, J. M. [Naval Surface Warfare Center Indian Head Explosive Ordnance Technology Division, Indian Head, Maryland 20640 (United States)

    2015-02-28

    We demonstrate the ability to produce core-shell nanoclusters of materials that typically undergo intermetallic reactions using helium droplet mediated deposition. Composite structures of magnesium and copper were produced by sequential condensation of metal vapors inside the 0.4 K helium droplet baths and then gently deposited onto a substrate for analysis. Upon deposition, the individual clusters, with diameters ∼5 nm, form a cluster material which was subsequently characterized using scanning and transmission electron microscopies. Results of this analysis reveal the following about the deposited cluster material: it is in the un-alloyed chemical state, it maintains a stable core-shell 5 nm structure at sub-monolayer quantities, and it aggregates into unreacted structures of ∼75 nm during further deposition. Surprisingly, high angle annular dark field scanning transmission electron microscopy images revealed that the copper appears to displace the magnesium at the core of the composite cluster despite magnesium being the initially condensed species within the droplet. This phenomenon was studied further using preliminary density functional theory which revealed that copper atoms, when added sequentially to magnesium clusters, penetrate into the magnesium cores.

  8. A method for recovery of iron, titanium, and vanadium from vanadium-bearing titanomagnetite

    Science.gov (United States)

    Zhang, Yi-min; Wang, Li-na; Chen, De-sheng; Wang, Wei-jing; Liu, Ya-hui; Zhao, Hong-xin; Qi, Tao

    2018-02-01

    An innovative method for recovering valuable elements from vanadium-bearing titanomagnetite is proposed. This method involves two procedures: low-temperature roasting of vanadium-bearing titanomagnetite and water leaching of roasting slag. During the roasting process, the reduction of iron oxides to metallic iron, the sodium oxidation of vanadium oxides to water-soluble sodium vanadate, and the smelting separation of metallic iron and slag were accomplished simultaneously. Optimal roasting conditions for iron/slag separation were achieved with a mixture thickness of 42.5 mm, a roasting temperature of 1200°C, a residence time of 2 h, a molar ratio of C/O of 1.7, and a sodium carbonate addition of 70wt%, as well as with the use of anthracite as a reductant. Under the optimal conditions, 93.67% iron from the raw ore was recovered in the form of iron nugget with 95.44% iron grade. After a water leaching process, 85.61% of the vanadium from the roasting slag was leached, confirming the sodium oxidation of most of the vanadium oxides to water-soluble sodium vanadate during the roasting process. The total recoveries of iron, vanadium, and titanium were 93.67%, 72.68%, and 99.72%, respectively.

  9. Iron titanium phosphates as high-specific-capacity electrode materials for lithium ion batteries

    Czech Academy of Sciences Publication Activity Database

    Essehli, R.; El Bali, B.; Faik, A.; Naji, M.; Benmokhtar, S.; Zhong, Y.R.; Su, L.W.; Zhou, Z.; Kim, J.; Kang, K.; Dušek, Michal

    2014-01-01

    Roč. 585, FEB (2014), s. 434-441 ISSN 0925-8388 Institutional support: RVO:68378271 Keywords : crystal structure * electrolyte * nasicon * oxyphosphate * lithium -ion batteries Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.999, year: 2014

  10. Control of nitrogen concentration in liquid lithium by iron-titanium alloy

    International Nuclear Information System (INIS)

    Hirakane, Shinji; Yoneoka, Toshiaki; Tanaka, Satoru

    2006-01-01

    Reducing the nitrogen concentration in liquid lithium is one of the most important steps in creating a liquid lithium blanket system. In this study, in order to verify the nitrogen gettering performance of Fe-Ti alloy, the variation in the nitrogen concentration in liquid lithium, into which Fe-10 at.% Ti or Fe-5 at.% Ti getter was immersed, was examined. The results confirmed a gettering performance of Fe-Ti alloy comparable to that of V-Ti alloy, although the effects were not durable in either the Fe-Ti or the V-Ti alloy. After the immersion test, the existing states of nitrogen absorbed in the gettering material were analyzed by means of XRD, XMA and XPS. TiN and some nitrogen dissolved in α-Fe without forming TiN were observed. It was indicated that nitrogen gettering is prevented not only by the surface nitrides, but also by the internal diffusion barriers originating from the absorbed nitrogen

  11. Effect of exhausting exercise and calcium supplementation on potassium, magnesium, copper, zinc and calcium levels in athletes

    International Nuclear Information System (INIS)

    Cinar, V.; Baltaci, A.K.; Mogulkoc, R.

    2009-01-01

    Present study was performed to determine four week calcium supplementation and athleticism exercise on plasma potassium, calcium, magnesium, cupper and zinc levels in resting and exhaustion. Research was carried out on 30 healthy male people. Group 1; Exercise, Group 2; Exercise + Calcium supplementation, Group 3; Sedentary + Calcium supplemented. All elements levels increased by exhausting exercise (P<0.05). Plasma K and Ca levels increased in exercise group after supplementation (P<0.05). Ca levels increased in exercise + supplemented group (P<0.05). This increase was much more in group three (P<0.05). Plasma Cu levels increased by Ca supplementation in sedentary (P<0.05). Exhausting exercise increased Zn levels in sedentary after supplementation (P<0.05). The results of present study show that calcium supplementation for 4 week does not have clear affect on potassium and Mg. However, calcium levels were increased by supplementation and Cu after the supplementation. It was also exhausting exercise that caused increase in all parameters. (author)

  12. The effect of initiation feature and environment on fatigue crack formation and early propagation in aluminum zinc magnesium copper

    Science.gov (United States)

    Burns, James T.

    The current research provides insight into fatigue crack formation and progression in the poorly understood size regime that bridges safe-life and damage tolerance approaches; particular attention is given to the influences of corrosion-induced degradation and time-cycle dependent loading environment effects. Quantitative analysis of crack formation life (Ni), microstructurally small crack (database. Results show that fatigue crack formation involves a complex interaction of elastic stress concentration, due to a 3-dimensional macro-pit, coupled with local micro-feature (and constituent) induced plastic strain concentration. Such interactions cause high Ni variability, but, from an engineering perspective, a broadly corroded surface should contain an extreme group of features driving Ni to ˜0. At low-applied stresses, Ni consumes a significant portion of total life, which is well predicted by coupling elastic-plastic FEA with empirical low-cycle fatigue life models. All pristine and corroded da/dN were uniquely correlated using complex continuum stress intensity (K) and crack opening solutions which account for the stress concentrating formation feature. Multiple crack growth regimes were observed, typical of environment enhanced fatigue in Al alloys. Such behavior is not captured by prominent mechanics-based small crack models. Furthermore, neither local closure nor slip-based models captured the order of magnitude variability in da/dN attributed to microstructure. Low temperature loading produces an order of magnitude increase in Ni, and even larger reduction in da/dN, due to elimination of H-enhanced cracking by reduced external water vapor pressure, lower crack tip reaction rate (to produce atomic-H), and slower H diffusion. Engineering level modeling approaches are validated using these high fidelity experimental results, informing next generation prognosis methods for realistic airframe environments.

  13. Magnetic concentration of iron-titanium ore with vanadium concentrate from campo Alegre de Lourdes - Bahia, Brazil

    International Nuclear Information System (INIS)

    Delgado, O.; Silva, F.T. da; Ogasawara, T.; Soares, G.F.

    1988-01-01

    The feasibility studies of magnetic concentration of the Campo Alegre de Lourdes ore were carried out, trying to obtain a maximum recovery of vanadium. As a consequence of the complex nature of the ore, mainly due to the presence of ilmenite as a exolutions in the interior of hematite/martite particles, it was not possible to separate the hematite-ilmenite eficiently, wich would be necessary for obtaining a high grade vanadium concentrate with low titanium content. (author) [pt

  14. The MCNP-4C2 design of a two element photon/electron dosemeter that uses magnesium/copper/phosphorus doped lithium fluoride.

    Science.gov (United States)

    Eakins, J S; Bartlett, D T; Hager, L G; Molinos-Solsona, C; Tanner, R J

    2008-01-01

    The Health Protection Agency is changing from using detectors made from 7LiF:Mg,Ti in its photon/electron personal dosemeters, to 7LiF:Mg,Cu,P. Specifically, the Harshaw TLD-700H card is to be adopted. As a consequence of this change, the dosemeter holder is also being modified not only to accommodate the shape of the new card, but also to optimize the photon and electron response characteristics of the device. This redesign process was achieved using MCNP-4C2 and the kerma approximation, electron range/energy tables with additional electron transport calculations, and experimental validation, with different potential filters compared; the optimum filter studied was a polytetrafluoroethylene disc of diameter 18 mm and thickness 4.3 mm. Calculated relative response characteristics at different angles of incidence and energies between 16 and 6174 keV are presented for this new dosemeter configuration and compared with measured type-test results. A new estimate for the energy-dependent relative light conversion efficiency appropriate to the 7LiF:Mg,Cu,P was also derived for determining the correct dosemeter response.

  15. Heavy metal contents in sediments of rivers and adjacent streams to the filling of Rio Azul, Rio Azul, San Jose, Costa Rica

    International Nuclear Information System (INIS)

    Mora Amador, Raul Alberto

    2003-01-01

    In Costa Rica there are no studies that have documented the concentrations of heavy metals in river sediments, caused by point sources of pollutants, such as the deposits sites of solid waste. The potential source of heavy metals concentrations in the study area, is an active landfill, known as Relleno Sanitario de Rio Azul, which is located southeast of the city of San Jose, in Distrito de Rio Azul de La Union. The site where the landfill Rio Azul is located is composed by a sequence of volcanic materials, which could have been affected by local faulting. This fact would mean a serious threat of contamination of groundwater in the region, geological faults are therefore a highly permeable, able to get in touch the fill pollutants with some aquifer. The mass of metal deposited on the site, from 1978 to date, has been estimated between 70000-100000 tm, which it becomes environmental concern in a first order. The results of X-ray fluorescence show the presence of elements such as vanadium, chromium, magnesium, copper, zinc, rubidium, strontium, potassium, calcium, iron, titanium and yttrium, which show a trend towards more high Concentrates in the fine fraction (d [es

  16. Exsolution of Iron-Titanium Oxides in Magnetite in Miller Range (MIL) 03346 Nakhlite: Evidence for Post Crystallization Reduction in the Nakhlite Cumulate Pile

    Science.gov (United States)

    Righter, Kevin; Keller, L. P.; Rahman, Z.; Christoffersen, R.

    2012-01-01

    MIL 03346 is one of the most mesostasis-rich nakhlites [1] and thought to have equilibrated at oxygen fugacities near the fayalite-magnetite-quartz oxygen (FMQ) buffer ([2,3]). Studies of FeTi oxides in nakhlites have led to additional constraints on their equilibration temperatures and fO2s [4,5,6,7]. Comparison of these results to fO2s calculated for shergottites indicates that nakhlites are among the most oxidized samples from the martian meteorite suite [2]. The mesostasis of MIL 03346 contains skeletal titanomagnetite. Several scientists noticed several years ago (e.g. [8]) that this titanomagnetite contains very fine oxidation-driven exsolution lamellae (Figure 1). However, the lamellae are so small that they cannot be characterized by electron microprobe analysis (EMPA). Here we select several areas for focused ion beam (FIB) extraction, prepare transmission electron microscopy (TEM) foils, and identify and analyze the lamellae using TEM at the Johnson Space Center (JSC). The resulting analyses are combined with previous work on nakhlites to interpret the thermal and oxidation history of this meteorite group.

  17. Interlaboratory comparison survey of the determination of chromium, manganese, iron, titanium in dust and arsenic, cadmium, cobalt and chromium in urine

    International Nuclear Information System (INIS)

    Christensen, Jytte Molin

    2000-01-01

    This report describes an intercomparison survey based on the Danish External Quality Assessment Scheme (DEQAS). The study was carried out in 1998 for 10 laboratories in a research project on assessment of levels and health effects of airborne particulate matter in mining, metal refining and metal working industries using nuclear and related analytical techniques. The project was co-ordinated by the IAEA. Eight laboratories measured chromium (Cr), manganese (Mn), iron (Fe) and titanium (Ti) in welding fume dust loaded on filters. Six laboratories measured arsenic (As), four laboratories measured cadmium (Cd), five laboratories measured cobalt (Co) and four laboratories measured chromium (Cr) in urine. The target values of the quality control materials were traceable to certified reference materials with respect to Cr in welding fume and As, Cd, Co and Cr in urine. For Mn, Fe and Ti in welding fume the target values were established based on values from reference laboratories and consensus values from several DEQAS rounds. For evaluating the analytical performance the z-score and E n number were calculated as recommended in ISO 45. The judgement of laboratories according to the performance scores revealed that few laboratories could maintain an ideal z-score below 3 and an ideal E n number below 1. Nearly all participants had a high precision in the reported results. This is a good basis for improvements. The deviations from the target values appear to be systematic, because the deviations for Mn, Fe, Ti in welding dust as well as for As, Cd, Co and Cr in urine were a linear function of the target values (ISO 5725 evaluation). The cause for this bias is unknown at present and might not be the same for all participants. It is necessary to look further into the cause for this bias. Therefore, validation of the methodologies and regularly use of certified reference materials are highly recommended. (author)

  18. Fluoride Alters Serum Elemental (Calcium, Magnesium, Copper, and Zinc) Homeostasis Along with Erythrocyte Carbonic Anhydrase Activity in Fluorosis Endemic Villages and Restores on Supply of Safe Drinking Water in School-Going Children of Nalgonda District, India.

    Science.gov (United States)

    Khandare, Arjun L; Validandi, Vakdevi; Boiroju, Naveen

    2018-02-17

    The present study aimed to determine the serum trace elements (copper (Cu), zinc (Zn), calcium (Ca), magnesium (Mg)) along with erythrocyte carbonic anhydrase (CA) activity and effect of intervention with safe drinking water for 5 years in the school children of fluorosis endemic area. For this purpose, three categories of villages were selected based on drinking water fluoride (F): Category I (control, F = 1.68 mg/L), category II (affected F = 3.77 mg/L), and category III (intervention village) where initial drinking water F was 4.51 mg/L, and since the last 5 years, they were drinking water containing water for 5 years in school-going children.

  19. Phase relations and equilibrium oxygen partial pressures in the iron-titanium-oxygen system at 1373 K; Tetsu-chitan-sansokei no 1373K ni okeru sokankei to heiko sanso bun`atsu

    Energy Technology Data Exchange (ETDEWEB)

    Inoue, O.; Ito, S.; Azakami, T. [Tohoku University, Sendai (Japan). Faculty of Engineering

    1996-09-20

    Phase relations and the equilibrium oxygen partial pressures in the Fe-Ti-O ternary system at 1373 K have been studied using a thermogravimetric technique in various atmospheres buffered by a CO-CO2 gas mixture and X-ray diffraction technique. The results indicate that at 1373 K ilmenite (FeTiO3) can be reduced and decomposed to iron and rutile (TiO2). Consequently upgrading ilmenite to a rutile substitute is possible in principle. From the present results, the standard Gibbs energy of the following reactions was calculated to be -184.7, -196.0 kJ{center_dot}mol{sup -1} at 1373 K, respectively. Fe(s)+FeTiO3(s)+1/2O{sub 2}(g)=Fe2TiO4(s), Fe(s)+TiO{sub 2}(s)+1/2O{sub 2}(g)=`FeTiO3`(s). Both the activities of magnetite and ulv6spinel in the Fe2TiO4-Fe3O4 spinel solid solutions coexisting with metallic iron at 1373 K obtained exhibit negative deviations from Raoult`s law. 19 refs., 10 figs., 3 tabs.

  20. Oxidation and Reduction of Iron-Titanium Oxides in Chemical Looping Combustion: A Phase-Chemical Description Oxydation et réduction des minerais de fer-titane dans la combustion en boucle chimique

    Directory of Open Access Journals (Sweden)

    den Hoed P.

    2011-05-01

    Full Text Available Ilmenite (FeTiO3 is being explored as an oxygen carrier in chemical looping processes. Its reduction and oxidation are described by the system Fe-Fe2O3-TiO2-Ti2O3. The phase diagram at 1 000°C, presented here, offers a useful tool for predicting reactions and their products. We see that Fe2TiO5 (pseudobrookite and TiO2 (rutile form a stable phase assemblage following the oxidation of FeTiO3 (ilmenite in air. The subsequent reduction of Fe2TiO5 at oxygen partial pressures of 10-15.5atm stabilizes Fe1.02Ti0.98O3, a solid solution of ilmenite. Further reduction will produce metallic iron, which compromises the integrity of the oxygen carrier for chemical looping processes. We speculate that the reduction of Fe-Ti oxides in several practical instances does not reach completion (and equilibrium under the imposed atmospheres operating in fuel reactors. L’ilménite (FeTiO3 est considéré comme un transporteur d’oxygène potentiel pour les procédés en boucle chimique. Ses mécanismes de réduction et d’oxydation sont décrits à travers le système Fe-Fe2O3-TiO2-TiO3. Le diagramme de phase à 1 000°C, présenté ici, est un outil utile pour prédire les réactions et les produits. Nous constatons que Fe2TiO5 (pseudobrookite et TiO2 (rutile forment un assemblage de phase stable après oxydation de l’ilménite (FeTiO3 dans l’air. La réduction subséquente de Fe2TiO5 à la pression partielle de 10−15,5atm stabilise vers Fe1.02Ti0.98O3, une solution solide d’ilménite. Une réduction plus poussée va produire du fer métallique et compromettre l’intégrité du transporteur d’oxygène dans la boucle chimique. Il est probable que la réduction des oxydes Fe-Ti ne soit pas, en pratique, complète et n’atteigne pas l’équilibre dans les conditions rencontrées en opération dans les réacteurs de réduction.

  1. Hydrogen storage in the form of metal hydrides

    Science.gov (United States)

    Zwanziger, M. G.; Santana, C. C.; Santos, S. C.

    1984-01-01

    Reversible reactions between hydrogen and such materials as iron/titanium and magnesium/ nickel alloy may provide a means for storing hydrogen fuel. A demonstration model of an iron/titanium hydride storage bed is described. Hydrogen from the hydride storage bed powers a converted gasoline electric generator.

  2. Effect of Microorganisms in the Bioremediation of Spent Engine Oil ...

    African Journals Online (AJOL)

    ADOWIE PERE

    interaction of these factors as suitable conditions are provided (Rahman et al., ... Magnesium, Copper, Zinc, Lead, Cadmium and so on from the wear and tear of the ..... microorganisms would also require essential nutrients as hydrocarbons ...

  3. Field emission properties and strong localization effect in conduction mechanism of nanostructured perovskite LaNiO{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Kamble, Ramesh B., E-mail: rbk.physics@coep.ac.in [Department of Physics, Indian Institute of Science, Bangalore 560012, Karnataka (India); Department of Physics, College of Engineering, Pune 411005, Maharashtra (India); Tanty, Narendra; Patra, Ananya; Prasad, V. [Department of Physics, Indian Institute of Science, Bangalore 560012, Karnataka (India)

    2016-08-22

    We report the potential field emission of highly conducting metallic perovskite lanthanum nickelate (LaNiO{sub 3}) from the nanostructured pyramidal and whisker shaped tips as electron emitters. Nano particles of lanthanum nickelate (LNO) were prepared by sol-gel route. Structural and morphological studies have been carried out. Field emission of LNO exhibited high emission current density, J = 3.37 mA/cm{sup 2} at a low threshold electric field, E{sub th} = 16.91 V/μm, obeying Fowler–Nordheim tunneling. The DC electrical resistivity exhibited upturn at 11.6 K indicating localization of electron at low temperature. Magnetoresistance measurement at different temperatures confirmed strong localization in nanostructured LNO obeying Anderson localization effect at low temperature.

  4. Measurement of β-glucan and other nutritional characteristics in ...

    African Journals Online (AJOL)

    Maiara

    2013-10-23

    Oct 23, 2013 ... of moisture by drying at 105°C for 06h00, determination of fat content by ether ... Calcium, magnesium, copper, zinc and iron were measured in. Atomic Absorption ..... A photometric adaptation of Somogyi method for the.

  5. Health benefits of almonds beyond cholesterol reduction

    Science.gov (United States)

    Almonds are rich in monounsaturated fat, fiber, alpha-tocopherol, minerals such as magnesium copper, and phytonutrients, albeit being energy-dense. The favorable fat composition and fiber contribute to the hypocholesterolemic benefit of almond consumption. By virtue of their unique nutrient composit...

  6. Preparation of ammonium sulfate, calcium oxide and rare earth concentrate from phospho-gypsum

    International Nuclear Information System (INIS)

    Andrianov, A.M.; Rusin, N.F.; Dejneka, G.F.; Zinchenko, T.A.; Burova, T.I.

    1978-01-01

    A technological scheme is proposed which gives ammonium sulfate, purified (from admixtures of silicon, iron, titanium, aluminium) calcium oxide with direct yield of calcium 91% and rare-earth concentrate, containing 5.6% of Ln 2 O 3 with direct yield of 99.5%

  7. Deep-sea foraminifera from the Cassidaigne Canyon (NW Mediterranean): Assessing the environmental impact of bauxite red mud disposal

    NARCIS (Netherlands)

    Fontanier, C.; Fabri, M.-C.; Buscail, R.; Biscara, L.; Koho, K.A.; Reichart, G.-J.; Cossa, D.; Galaup, S.; Chabaud, G.; Pigot, L.

    2012-01-01

    Benthic foraminiferal assemblages were investigated from two sites along the axis of the Cassidaigne Canyon (NW Mediterranean Sea). Both areas are contaminated by bauxite red mud enriched in iron, titanium, vanadium and chromium. These elemental enrichments are related to bauxite-derived

  8. Chemical Analysis of Asymptotic Giant Branch Stars in M62

    NARCIS (Netherlands)

    Lapenna, E.; Mucciarelli, A.; Ferraro, F. R.; Origlia, L.; Lanzoni, B.; Massari, D.; Dalessandro, E.

    2015-01-01

    We have collected UVES-FLAMES high-resolution spectra for a sample of 6 asymptotic giant branch (AGB) and 13 red giant branch (RGB) stars in the Galactic globular cluster (GC) M62 (NGC 6266). Here we present the detailed abundance analysis of iron, titanium, and light elements (O, Na, Mg, and Al).

  9. Transverse and longitudinal electrooptic properties of highly (100) oriented Pb(Zr,Ti)O{sub 3} films grown on glass substrates

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jong-Jin [Department of Future Technology, Korea Institute of Machinery and Materials, 66 Sang-Nam Dong, Chang-Won, Gyeong-Nam, 641-010 (Korea, Republic of) and School of Materials Science and Engineering, Seoul National University, Seoul, 151-742 (Korea, Republic of)]. E-mail: finaljin@kmail.kimm.re.kr; Park, Gun-Tae [School of Materials Science and Engineering, Seoul National University, Seoul, 151-742 (Korea, Republic of); Kim, Hyoun-Ee [School of Materials Science and Engineering, Seoul National University, Seoul, 151-742 (Korea, Republic of); Kim, Dal-Young [Department of Visual Optics, Seoul National University of Technology, 172 Gongreung 2-dong, Nowon-gu, Seoul 139-743 (Korea, Republic of)

    2006-12-05

    The Pb(Zr,Ti)O{sub 3} [PZT] films with a preferred orientation generally have columnar texture. Because the properties of a PZT film are strongly dependent on its crystallographic direction, the electrooptic properties along the longitudinal and transverse direction are expected to be anisotropic. In this study, highly (100) oriented PZT films were grown on glass and ITO (Indium Tin Oxide) coated glass substrates using the sol-gel multi-coating method with lanthanum nitrate and lanthanum nickel nitrate as buffer layers. The longitudinal and transverse electrooptic properties of the textured films were characterized by transmission-mode measuring equipment with a Senarmont compensator using a sample tilting method. The calculated longitudinal and transverse electrooptic coefficients of the highly (100) oriented PZT films were 147 and 250 pm/V, respectively.

  10. Task action T 10 E absorption of D,T gas on heated metal beds other than uranium

    International Nuclear Information System (INIS)

    Hircq, B.

    1988-01-01

    Tritium storage represents an important function inside the NET TRITIUM PLANT. Several materials can be envisaged for a storage under solid form. Among them Lanthanum-Nickel-Manganese alloys (La Ni 5-y Mn y ) are particularly interesting and are studied in this task, while developing the appropriate tritium technology. In this report, after recalling the main objectives of the task, the reasons of these alloys choice are given. Then the logical chart of the whole task is discussed before giving the main results obtained during the period (June 86 - December 87): conception and realization of an experimental tritium loop for absorption and desorption kinetics studies, modification of an existing furnace for these studies, study of absorption and desorption kinetics, conception and realization of eprouvettes for aging studies with tritiated compounds, conception and realization of a tritium loading loop for these aging studies and conception of an industrial tritium storage prototype

  11. Pyrotechnically Generated and Disseminated Aerosol for Bioagent Defeat

    Science.gov (United States)

    2016-12-01

    blend), aluminum, copper, iron, and ferrotitanium (an iron/ titanium blend) provides an additional layer of antimicrobial effect because each of these...Free Trade Agreements program. The work was started in October 2014 and completed in January 2016. The use of either trade or manufacturers ’ names...perform the same amount of decontamination; are lower in toxicity; require no additional equipment to operate; and are small, man-portable devices

  12. Disinfestation of Date Fruits by Gamma Radiation and Its Effect on the Nutritional Contents of Dates

    International Nuclear Information System (INIS)

    Ahmed, Z.A.; Boshra, S.A.; Mikhaiel, A.A.; Hassan, N.M.

    2008-01-01

    Irradiation dis infestations of Siwa date fruits seems to be a very promising method. Considerations of the health safety of irradiated date fruits involve nutritional contents has been investigated by chemical analysis. The dose of 400 and 1000 Gy were lethal for the different stages of oases date moth, Ephestia calidella. Dates are a good source of iron and potassium, they also contain calcium, magnesium, copper and other minerals. The radiation dose 1000 Gy had mostly affected the carbohydrates content, some minerals as Fe, Ca and Na partially changed by the treatment. Protein and vitamin contents were slightly affected

  13. ACCUMULATION OF SELECTED METALS IN UMBILICAL CORD BLOOD OF NULLIPAROUS AND MULTIPAROUS WOMEN AND CORRELATION WITH THE NEWBORN´S PARAMETERS

    Directory of Open Access Journals (Sweden)

    Iwona Kozikowska

    2012-08-01

    Full Text Available The aim of this study was to determine the content of magnesium, copper, cadmium and iron in umbilical cord blood of the newborns depending on the number of pregnancies. It was established correlations between average concentrations these metals in cord blood and newborn’s parameters. The study material was collected immediately after delivery from the Department of Obstetrics and Gynecology in Bytom. The cord blood was taken from 99 women between 29-40 years old. Women were divided into two groups: nulliparous and multiparous. The concentration of metals in the cord blood was determined by flame atomic absorption spectrometry (FAAS. The conducted study demonstrates that magnesium, copper, cadmium and iron were noted in all tissues, both nulliparous women and multiparous mothers. The maximum concentration of cadmium in umbilical cord blood was observed among multiparous mothers (2.229 mg.kg-1 d.m.. In group of nulliparous women was observed higher concentration of Fe, Mg and Cu in umbilical cord blood than in multiparous mothers. It was noted some statistically significant correlation between iron, copper and newborn’s parameters. Parity influences the concentration of cadmium in umbilical cord blood with higher level found in multiparous women. Average content of iron in cord blood did not decrease with parity, it indicate that this element is preferentially taken up by the child.

  14. Tritium storage metal-bed pyrophoricity measurements

    International Nuclear Information System (INIS)

    Longhurst, G.R.; Neilson, R.M. Jr.; Porter, L.J.

    1987-01-01

    A safety concern for metal-bed tritium storage systems is the possibility of spontaneous combustion and/or explosion if the bed is accidentally exposed to air. This may result in the dispersion of tritium or tritiated compounds. Of several materials being considered for use in tritium storage beds, uranium (U), zirconium-cobalt (ZrCo), and lanthanum-nickel aluminide (LaNi 5-x Al x ) are of particular interest. It is well known that uranium that has been activated by cycles of hydriding and dehydriding is extremely pyrophoric when exposed to air or other oxidizers. Uranium hydride has also been found to be mildly pyrophoric, but less is known about the pyrophoric natures of the hydrides of the other materials. An experiment is in progress to evaluate the pyrophoric response of these materials and their hydrides and deuterides in air. Small (<100 mg) samples of depleted uranium were hydrided and then exposed to atmospheres of air, oxygen, or nitrogen using a thermogravimetric analyzer to monitor the sample weight and temperature. There was not an immediate pyrophoric response at room temperature, but ignition occured at moderately elevated temperatures for air and oxygen atmospheres. The experimental apparatus has been upgraded, and tests are continuing on these materials

  15. Epitaxial growth of mixed conducting layered Ruddlesden–Popper La{sub n+1}Ni{sub n}O{sub 3n+1} (n = 1, 2 and 3) phases by pulsed laser deposition

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Kuan-Ting; Soh, Yeong-Ah; Skinner, Stephen J., E-mail: s.skinner@imperial.ac.uk

    2013-10-15

    Graphical abstract: - Highlights: • High quality epitaxial thin films of layered Ruddlesden–Popper nickelates were prepared. • For the first time this has been achieved by the PLD process. • n = 1, 2 and 3 films were successfully deposited on SrTiO{sub 3} and NdGaO{sub 3} substrates. • c-Axis oriented films were confirmed by XRD analysis. • In-plane and out-of-plane strain effects on lattice are discussed. - Abstract: Layered Ruddlesden–Popper phases of composition La{sub n+1}Ni{sub n}O{sub 3n+1} (n = 1, 2 and 3) have been epitaxially grown on SrTiO{sub 3} (0 0 1) or NdGaO{sub 3} (1 1 0) single crystal substrates using the pulsed laser deposition technique. X-ray diffraction analyses (θ/2θ, rocking curves, and φ-scans) and atomic force microscopy confirms the high-quality growth of the series of films with low surface roughness values (less than 1 nm). In particular, epitaxial growth of the higher order phases (n = 2 and 3) of lanthanum nickelate have been demonstrated for the first time.

  16. Epitaxial growth of mixed conducting layered Ruddlesden–Popper Lan+1NinO3n+1 (n = 1, 2 and 3) phases by pulsed laser deposition

    International Nuclear Information System (INIS)

    Wu, Kuan-Ting; Soh, Yeong-Ah; Skinner, Stephen J.

    2013-01-01

    Graphical abstract: - Highlights: • High quality epitaxial thin films of layered Ruddlesden–Popper nickelates were prepared. • For the first time this has been achieved by the PLD process. • n = 1, 2 and 3 films were successfully deposited on SrTiO 3 and NdGaO 3 substrates. • c-Axis oriented films were confirmed by XRD analysis. • In-plane and out-of-plane strain effects on lattice are discussed. - Abstract: Layered Ruddlesden–Popper phases of composition La n+1 Ni n O 3n+1 (n = 1, 2 and 3) have been epitaxially grown on SrTiO 3 (0 0 1) or NdGaO 3 (1 1 0) single crystal substrates using the pulsed laser deposition technique. X-ray diffraction analyses (θ/2θ, rocking curves, and φ-scans) and atomic force microscopy confirms the high-quality growth of the series of films with low surface roughness values (less than 1 nm). In particular, epitaxial growth of the higher order phases (n = 2 and 3) of lanthanum nickelate have been demonstrated for the first time

  17. Thermochemical characteristics of La n+1Ni nO3n+1 oxides

    International Nuclear Information System (INIS)

    Bannikov, D.O.; Safronov, A.P.; Cherepanov, V.A.

    2006-01-01

    Lanthanum nickelates: La 2 NiO 4+δ , La 3 Ni 2 O 7-δ , La 4 Ni 3 O 10-δ and LaNiO 3-δ the members of Ruddlesden-Popper series La n+1 Ni n O 3n+1 were prepared using citrate route. Dissolution enthalpies of complex oxides as well as a number of subsidiary substances were measured by means of Calvet calorimeter in 1 M solution of hydrochloric acid at 25 deg. C. The dissolution scheme of complex oxides in hydrochloric acid was proposed and enthalpies of formation of the complex oxides from binary oxides were calculated considering oxygen nonstoichiometry of these substances. Enthalpies of step-by-step oxidation were evaluated. Partial enthalpy contribution of LaO layers was calculated endothermic equals to 30.9 J/mol while partial enthalpy contribution of perovskite LaNiO 3 layers was negative equals to -97.0 J/mol. Enthalpy of formation of any complex oxide of Ruddlesden-Popper series fits very well to the linear regression based on these values

  18. Extended vapor-liquid-solid growth of silicon carbide nanowires.

    Science.gov (United States)

    Rajesh, John Anthuvan; Pandurangan, Arumugam

    2014-04-01

    We developed an alloy catalytic method to explain extended vapor-liquid-solid (VLS) growth of silicon carbide nanowires (SiC NWs) by a simple thermal evaporation of silicon and activated carbon mixture using lanthanum nickel (LaNi5) alloy as catalyst in a chemical vapor deposition process. The LaNi5 alloy binary phase diagram and the phase relationships in the La-Ni-Si ternary system were play a key role to determine the growth parameters in this VLS mechanism. Different reaction temperatures (1300, 1350 and 1400 degrees C) were applied to prove the established growth process by experimentally. Scanning electron microscopy and transmission electron microscopy studies show that the crystalline quality of the SiC NWs increases with the temperature at which they have been synthesized. La-Ni alloyed catalyst particles observed on the top of the SiC NWs confirms that the growth process follows this extended VLS mechanism. The X-ray diffraction and confocal Raman spectroscopy analyses demonstrate that the crystalline structure of the SiC NWs was zinc blende 3C-SiC. Optical property of the SiC NWs was investigated by photoluminescence technique at room temperature. Such a new alloy catalytic method may be extended to synthesis other one-dimensional nanostructures.

  19. Rapid separation method for {sup 237}Np and Pu isotopes in large soil samples

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Sherrod L., E-mail: sherrod.maxwell@srs.go [Savannah River Nuclear Solutions, LLC, Building 735-B, Aiken, SC 29808 (United States); Culligan, Brian K.; Noyes, Gary W. [Savannah River Nuclear Solutions, LLC, Building 735-B, Aiken, SC 29808 (United States)

    2011-07-15

    A new rapid method for the determination of {sup 237}Np and Pu isotopes in soil and sediment samples has been developed at the Savannah River Site Environmental Lab (Aiken, SC, USA) that can be used for large soil samples. The new soil method utilizes an acid leaching method, iron/titanium hydroxide precipitation, a lanthanum fluoride soil matrix removal step, and a rapid column separation process with TEVA Resin. The large soil matrix is removed easily and rapidly using these two simple precipitations with high chemical recoveries and effective removal of interferences. Vacuum box technology and rapid flow rates are used to reduce analytical time.

  20. Direct reading spectrochemical analysis of nuclear graphite; Analisis espectroquimico de lectura directa de grafito nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Roca Adell, M; Becerro Ruiz, E; Alvarez Gonzalez, F

    1964-07-01

    A description is given about the application of a direct-reading spectrometer the Quantometer, to the determination of boron. calcium, iron, titanium and vanadium in nuclear grade graphite. for boron the powdered sample is mixed with 1% cupric fluoride and excited in a 10-amperes direct current arc and graphite electrodes with a crater 7 mm wide and 10 mm deep. For the other elements a smaller crater has been used and dilution with a number of matrices has been investigated; the best results are achieved by employing 25% cupric fluoride. The sensitivity limit for boron is 0,15 ppm. (Author) 21 refs.

  1. Analysis of trace metals in various brands of cigarettes

    International Nuclear Information System (INIS)

    Iqbal, M.

    1996-01-01

    The present work deals with the analysis of trace metals in various brands of cigarettes belonging to four different countries. In the present research seven trace elements have been determined spectrophotometrically by the use of suitable analytical reagent of the respective metal ions. The metals which has been analysed quantitatively in forty one brand of cigarettes are aluminium, copper, chromium, nickel, iron titanium and zinc. The concentration per cigarette of these metals are in tolerable range. The concentration of above mentioned metal ions is highest in Pakistani cigarettes tobacco while the concentration of nickel is highest in American cigarettes. (author) 221 refs

  2. Determination of the total nitrate content of thorium nitrate solution with a selective electrode

    International Nuclear Information System (INIS)

    Wirkner, F.M.

    1979-01-01

    The nitrate content of thorium nitrate solutions is determined with a liquid membrane nitrate selective electrode utilizing the known addition method in 0.1 M potassium fluoride medium as ionic strength adjustor. It is studied the influence of pH and the presence of chloride, sulphate, phosphate, meta-silicate, thorium, rare earths, iron, titanium, uranium and zirconium at the same concentrations as for the aqueous feed solutions in the thorium purification process. The method is tested in synthetic samples and in samples proceeding from nitric dissolutions of thorium hidroxide and thorium oxicarbonate utilized as thorium concentrates to be purified [pt

  3. Investigation of electrochemical intrusion of cations by the method of contact electric resistance

    International Nuclear Information System (INIS)

    Marichev, V.A.

    1997-01-01

    Paper shows the possibility and prospects of application of contact electric resistance technique (CER) to study in-situ the initial stages of electrochemical admission of cations (ECA). ECA is shown to increase CER of metals. It enables to determine ECA potential and to investigate kinetics of this process. Using ECA in copper, silver and zinc from alkali solutions as an example one has shown that CER technique enables to obtain results that do not contradict well-known published data. Potentials of ECA cations from acid and neutral solutions in copper, platinum, iron, titanium and tungsten are determined

  4. Application of energy-dispersive XRF technique in the hydrometallurgy study of local zircon

    International Nuclear Information System (INIS)

    Meor Yusoff Sulaiman; Kamaruddin Hussin; Azizan Aziz

    1996-01-01

    In this study, energy-dispersive X-ray Fluorescence (EDXR-F) was used to analyse the elemental composition of the starting zircon mineral associated elements in the leaching solution. Besides analysing the major elements i.e. of zirconium, silicon and hafnium, trace elemental analysis for iron, titanium and the naturally occurring radioactive element thorium and uranium are important in establishing the grades of Malaysian zircon. The technique was also used in determine the optimum conditions for zirconium and hafnium recovery during the leaching process

  5. Study of N-cinnamoylphenylhydroxylaminate solubility in water and organic solvents

    International Nuclear Information System (INIS)

    Pilipenko, A.T.; Shpak, Eh.A.; Samchuk, A.I.

    1975-01-01

    The composition of complexes of N-cinnamoylphenylhydroxylamine with copper, cadmium, lead, indium, iron, gallium, titanium, zirconium, hafnium, niobium, tantalum, tungsten, molybdenum and vanadium was determined. The solubility products of the N-cinnamoylphenylhydroxylaminates of copper, cadmium, indium, gallium and iron were determined by the method of measuring the solubility of precipitates in acid. The solubility of N-cinnamoylphenylhydroxalaminates of cadmium, indium, iron, titanium, zirconium, hafnium, niobium, tantalum, vanadium, molybdenum and tungsten in organic solvents was studied. Two-phase constants for the stability of the complexes were calculated. (author)

  6. Direct reading spectrochemical analysis of nuclear graphite

    International Nuclear Information System (INIS)

    Roca Adell, M.; Becerro Ruiz, E.; Alvarez Gonzalez, F.

    1964-01-01

    A description is given about the application of a direct-reading spectrometer the Quantometer, to the determination of boron. calcium, iron, titanium and vanadium in nuclear grade graphite. for boron the powdered sample is mixed with 1% cupric fluoride and excited in a 10-amperes direct current arc and graphite electrodes with a crater 7 mm wide and 10 mm deep. For the other elements a smaller crater has been used and dilution with a number of matrices has been investigated; the best results are achieved by employing 25% cupric fluoride. The sensitivity limit for boron is 0,15 ppm. (Author) 21 refs

  7. On the composition, mineralization and genesis of Geran mangerite-anorthosite complex of Dzhudzur ringe. O sostave, rudonosnosti i genezise geranskogo mangerit-anortozitovogo kompleksa khr. Dzhugdzhur

    Energy Technology Data Exchange (ETDEWEB)

    Sukhanov, M K; Tyazhelov, A G; Zhuravlev, D Z; Titov, V M [AN SSSR, Moscow (USSR)

    1990-08-01

    Some controversial problems dealing with age of anorthosites, as well as magnerites and gabbroids which are positionally connected with them are discussed using new geological and radiological data. The age was determined by means of Sm-Nd-technique ({sup 147}Sm/{sup 144}Nd; {sup 143}Nd/{sup 144}Nd isotope ratios were considered). Comprehensive mappimg of ore field main types has shown, that the bulk of apatite-ilmenite-titanomagnetite ores is connected with the second phase of gerau complex, which origin is explained by longterm formation of central anorthosite group that resulted into enrichment of residual melts by iron, titanium and phosphor.

  8. EFFECTS OF SODIUM CHLORIDE ON GROWTH AND MINERAL NUTRITION OF PURPLETOP VERVAIN

    Directory of Open Access Journals (Sweden)

    Piotr Salachna

    2016-04-01

    Full Text Available There is a rising demand for salt-tolerant species for landscaping. Purpletop vervain is an excellent landscape plant for gardens and parks, with fragrant lavender to rose-purple flowers. However, little is known concerning the effect of sodium chloride on morphological characteristics, flowering and mineral uptake of purpletop vervain. In this study, carried out in 2013–2014, the plants of purpletop vervain were grown in pots in an unheated plastic tunnel. The plants were watered with 200 mM NaCl solution four times, every seven days. Salinity-exposed plants were characterized by slightly reduced plant height, weight of the aboveground part and visual score. Salt stress caused also an increase in leaf content sodium, chlorine and manganese. Salinity had no effect on earliness of flowering and content in leaves of phosphorus, potassium, magnesium, copper, zinc and iron. Purpletop vervain seems to be plant species able to tolerate salt stress under controlled conditions.

  9. IR and Raman spectroscopy of sodium aluminophosphate vitreous materials for immobilization of high level wastes from nuclear fuel reprocessing

    International Nuclear Information System (INIS)

    Stefanovskij, S.V.; Myasoedov, B.F.; Remizov, M.B.; Belanova, E.A.

    2014-01-01

    The structure of sodium aluminophosphate vitreous materials containing constituents of high level wastes (cesium, magnesium, copper and molybdenum oxides) from uranium-graphite reactor has been studied by IR and Raman spectroscopy techniques coupled with X-ray diffraction. The structural network has been shown to be composed of short phosphorus-oxygen chains with embedded aluminum-oxygen tetrahedra. In the magnesium-bearing samples the cross-linking with Mg 2+ ions is possible. The effect of other oxides (Cs 2 O, MoO 3 , CuO) on the glass structure is negligible for the occuring amounts. The glasses have been devitrified partly at the quenching and much stronger at the annealing. It is reflected in splitting of the vibration bands of the bonds in structural units of the anionic motif of the vitreous materials. (authors)

  10. Mineral content of the honey produced in Zulia state, Venezuela.

    Science.gov (United States)

    Sulbarán de Ferrer, Betzabé; Ojeda de Rodríguez, Graciela; Peña, Jorge; Martínez, Janeth; Morán, María

    2004-09-01

    The mineral content of the honey produced in five zones of the Zulia state, Venezuela, during dry and rainy seasons was determined. The analyzed elements were: sodium, potassium (by emission spectroscopy), calcium, magnesium, copper, iron, manganese (by atomic absorption spectroscopy), phosphorus (phosphate ions, by colorimetric method), and ash content of raw honey samples directly collected from different beekeepers. The mean values for Na, K, Ca, Mg, Cu, Fe, Mn, and P were 353+84; 1774+138; 237+66; 52+24; 0.76+0.43; 13.5+10.23; 0.92+0.42 and 1642+323 mg/kg respectively. The mean ash content was 0.431+0.15%. Potassium was the most abundant of the elements determined. This results confirm that Zulian honey can be considered a good source of minerals.

  11. Influence of inoculation with ascochyta lentis on mineral contents (Na, Ca, Mg, Cu, and Fe) of susceptible and resistant lines of lentil (Lens culinaris medik.)

    International Nuclear Information System (INIS)

    Sahi, S.T.; Ghazanfar, M.U.; Habib, A.; Wakil, W.

    2010-01-01

    An experiment was conducted to determine the mineral contents of the healthy and inoculated plant of lentil and their relationship toward the Ascochyta lentis disease. The results revealed that magnesium, copper and zinc contents of un-inoculated lentil lines, included in susceptible group were higher than those included in resistant group whereas, sodium, calcium and iron contents were more in the resistant as compared to the susceptible group. Upon inoculation with Ascochyta lentis, the cause of lentil blight disease, sodium, calcium, zinc, copper and iron contents increased invariably in both the susceptible and resistant groups of lentil lines. On the other hand, magnesium contents increased in susceptible group but decreased in resistant group. The over all results proved that considerable variation exists in micro mineral contents of resistant and susceptible lines of lentil. (author)

  12. Sustainable prevention of resource conflicts. Raw materials supply and demand (Report 2); Rohstoffkonflikte nachhaltig vermeiden. Rohstoffe zwischen Angebot und Nachfrage (Teilbericht 2)

    Energy Technology Data Exchange (ETDEWEB)

    Taenzler, Dennis; Westerkamp, Meike [Adelphi Research, Berlin (Germany); Supersberger, Nikolaus; Ritthoff, Michael; Bleischwitz, Raimund [Wuppertal Institut (Germany)

    2011-04-15

    The demand for both energetic and non-energetic raw materials has been increasing continuously during the past few decades. Especially during the last few years, the threat of structural shortages of supply or availability came into focus. The discussion is highly controversial, especially in the case of petroleum. This sub-report presents an analysis of the supply situation of energetic and non-energetic raw materials, i.e. petroleum, coal and nuclear fuels on the one hand as well as iron and steel, chromium, nickel, cobalt, aluminium, magnesium, copper, platinum and platinum metals, industrial minerals, boron salts, phosphate, zirconium and zirconium oxide on the other hand. It is important to discuss also regional availability patterns in order to arrive at a regional picture of potential supply risks and resulting conflicts over raw materials as this is the best way to assess the danger of impending conflicts. (orig.)

  13. Relationship between the level of essential metal elements in human hair and coronary heart disease

    International Nuclear Information System (INIS)

    Bor-Tsung Hsieh; Kai-Yuan Cheng; Ying-Chen Chang

    2011-01-01

    Studies on epidemics have demonstrated the relationship between coronary heart disease (CHD) and mineral substances, such as selenium, calcium, magnesium, sodium, potassium, copper, zinc, iron, manganese, and vanadium, in human bodies. In this study, instrumental neutron activation analysis (INAA) and flame atomic absorption spectrophotometry (FAAS) were applied to evaluate the levels of selenium, calcium, magnesium, sodium, potassium, copper, zinc, and iron in healthy individuals and CHD patients. Hair samples were collected from 42 healthy participants and 28 diagnosed CHD patients. Calcium, magnesium, copper, and zinc levels in healthy individuals are significantly higher than the levels found in the patients (p < 0.01). Calcium/selenium ratio is also significantly higher in healthy individuals (p < 0.05). Based on the possible synergies and/or antagonisms of elements and their absorption and metabolism, magnesium/calcium, zinc/copper, and sodium/potassium ratios showed positive relevance (p < 0.01). (author)

  14. Interrelation of transport properties, defect structure and spin state of Ni3+ in La1.2Sr0.8Ni0.9Fe0.1O4+δ

    Science.gov (United States)

    Gilev, A. R.; Kiselev, E. A.; Zakharov, D. M.; Cherepanov, V. A.

    2017-10-01

    The total conductivity, Seebeck coefficient and oxygen non-stoichiometry for La1.2Sr0.8Ni0.9Fe0.1O4+δ have been measured vs temperature and oxygen partial pressure P(O2). The measurements were carried out at 800, 850, 900 and 950 °C within the P(O2) range of 10-5-0.21 atm. La1.2Sr0.8Ni0.9Fe0.1O4+δ was shown to be oxygen deficient in all temperature and P(O2) ranges studied. The calculated values of the partial molar enthalpy of oxygen depend very slightly on oxygen content (δ), indicating that La1.2Sr0.8Ni0.9Fe0.1O4+δ with the oxygen deficiency can be considered an ideal solution. The model of point defect equilibria in La1.2Sr0.8Ni0.9Fe0.1O4+δ has been proposed and fitted to experimental dependencies. Subsequent joint analysis of the defect structure and transport properties revealed that electron holes can coexist in both localized and quasi-delocalized states in the oxide: the former corresponded to high-spin state Ni3+ and the latter - to low-spin state Ni3+. The mobilities of localized electron holes were shown to be significantly lower in comparison to quasi-delocalized ones. The behavior of localized electron holes was explained in terms of a small polaron conduction mechanism; in contrast, quasi-delocalized electron holes were described in terms of a band conduction approach. The small polaron conduction mechanism was shown to be predominant in the Sr- and Fe-co-doped lanthanum nickelate.

  15. The exploration of Lanthanum based perovskites and their complementary electrolytes for the supercapacitor applications

    Directory of Open Access Journals (Sweden)

    Nadarajan Arjun

    Full Text Available In this study, four different kinds of perovskite powders (LaMnO3, LaFeO3, LaCrO3, and LaNiO3 were prepared and investigated as anode materials for supercapacitor. The as-prepared powders were blended with active carbon and subsequently coated on the nickel plates as the collector layer of the supercapacitors. Three different types of the aqueous solutions (3 M KCl, 1 M LiOH, and 3 M LiOH were respectively served as the electrolytes for the supercapacitor. The morphology and crystalline phase were characterized by transmission electron microscopy and XRD. The electrical capacity and impedance were measured by the electrochemical capacitance voltage analyzer and impedance spectroscopy. The profiles of specific capacitance of the four different anodic electrodes and three different electrolytes were implemented. The impedance results indicated that four asymmetric pseudocapacitors didn’t show any Warburg-type line and semi-circle line in the low-frequency region. According to the CV profiles, the intrinsic LaNiO3 exhibits the highest specific capacitance of 106.58 F/g in 3 M LiOH. Furthermore, the 98% of the initial capacitance of LaNiO3 was retained after 500 charge-discharge life cycles at the maximum current density of 1 A/g. The efficient charge storage of LaNiO3 was attributed by the anion intercalated redox reactions along with the suitability of electrode-electrolyte interactions. Keywords: Perovskite, Lanthanum nickel oxide, Pseudocapacitance, Asymmetric supercapacitor, Oxygen de-intercalation

  16. Methods in rock magnetism and palaeomagnetism techniques and instrumentation

    CERN Document Server

    Collinson, D W

    1983-01-01

    During the last 30 years the study of the magnetic properties of rocks and minerals has substantially contributed to several fields of science. Perhaps the best known and most significant advances have resulted from the study of palaeomagnetism, which led to quantitative confirmation of continental drift and polar wandering through interpretation of the direction of remanent magnetism observed in rocks of different ages from different continents. Palaeomagnetism has also, through observations of reversals of magnetiz­ ation, ancient secular variation and ancient field intensities provided data relevant to the origin of the geomagnetic field, and other investigations have contributed significantly to large-scale and local geological studies, the dating of archaeological events and artefacts and more recently to lunar and meteoritic studies. Rock and mineral magnetism has proved to be an interesting study in its own right through the complex magnetic properties and interactions observed in the iron-titanium ox...

  17. Analysis of components from drip tests with ATM-10 glass

    International Nuclear Information System (INIS)

    Fortner, J.A.; Bates, J.K.; Gerding, T.J.

    1996-09-01

    Waste package assemblies consisting of actinide-doped West Valley ATM-10 reference glass and sensitized 304L stainless steel have been reacted with simulated repository groundwater using the Unsaturated Test Method. Analyses of surface corrosion and reaction products resulting from tests that were terminated at scheduled intervals between 13 and 52 weeks are reported. Analyses reveal complex interactions between the groundwater, the sensitized stainless steel waste form holder, and the glass. Alteration phases form that consist mainly of smectite clay, brockite, and an amorphous thorium iron titanium silicate, the latter two incorporating thorium, uranium, and possibly transuranics. The results from the terminated tests, combined with data from tests that are still ongoing, will help determine the suitability of glass waste forms in the proposed high-level repository at the Yucca Mountain Site

  18. Petrology and mapping of Fe and Ti occurences in Passira country, PE, Brazil

    International Nuclear Information System (INIS)

    Silva Filho, A.F. da; Pinho Guimaraes, I. de.

    1979-01-01

    The results of a geologic mapping realized at the scale of 1:25.000, for graduating in geology, the will show in this communication. The area mapped has 230 square kilometers and it is localized between the south lattitudes of 7 0 52'30'' and 8 0 42'45'' and the west greenwiches of 35 0 26'49'' and 35 0 33'30'', at the districts of Passira and Limoeiro-PE. At the area, are recorgnized migmatites granites, biotite schists, hornblende-gneisses, quartz-diorites and amphigolites. The iron titanium ore are fitted, like xenoliths, inside the amphibolites. The amphibolites have orthorocks type, and they are derived predominatly of the quartz-diorite unit, where they may be individualized cartographicaly. On the other side of the geological mapping, we did many thin sections and polished, chemical analyses of the ore bodyes, and the results will be disciminated [pt

  19. Mineralogical aspects of the laterites of Maicuru

    International Nuclear Information System (INIS)

    Lemos, V.P.; Costa, M.C. da

    1989-01-01

    This paper presents the prelimary mineralogical data of the weathering materials derived from the alkaline-ultramafic-carbonatitic Maicuru complex, State of Para. These material include several minerals species: iron, titanium and aluminium oxides/hydroxides as aluminous goethite, geothite, hematite, maghemite, lepidocrocite, anatase; and gibbsite; clay minerals of the smectite, chlorite, vermiculite and kaolinite groups and interstratified chlorite-smectite, mica-vermiculite, vermiculite-chlorite and Kaolinite-smectite; and aluminous phosphates of the crandalite group, wardite, augelite, senegalite, wavelite and variscite. The principal characteristics of these minerals were obtained by X-ray diffraction, optical methods, electron probe microanalysis, energy dispersive scanning electron microscope, X-ray fluorescence, atomic absorption, inductively coupled plasma-ICP source spectrometry and colorimetric methods. (author) [pt

  20. Brazil Geologic Basic Survey Program - Limoeiro - Sheet SB.25-Y-C-V -Pernambuco State

    International Nuclear Information System (INIS)

    Barbosa, A.G.

    1991-01-01

    The Limoeiro map-sheet (SB.25-Y-C-V;1:100,000 scale), State of Pernambuco is delimited by the meridians 35 0 00'W to 35 0 30' W and parallels 7 0 30' S to 8 0 00' S. The sheet covers an area of about 3,000 km 2 . The basement rocks probable Archaean age consist of gneiss and migmatite. The basement rocks are overlain by Lower Proterozoic metasediments (schist and para gneiss), locally with flows (amphibolite), metamorphosed in the middle to high amphibolite facies. Geochemical surveys including stream sediment sampling and rock chip sampling were carried out. Ground geophysics included magnetometer, gravity and radiometric (scintillometer) surveys. A provisional metallogenetic map at 1:100,000 scale was prepared on which areas with potential for economic deposits of gold, apatite, barium copper, nickel, cobalt, zinc, niobium, iron, titanium and vanadium are shown. (author)

  1. Research and development project in fiscal 1989 for fundamental technologies for next generation industries. Achievement report on research and development on photoreactive materials (Research on designing and organizing technology for PHB materials); 1989 nendo hikari hanno zairyo no kenkyu kaihatsu seika hokokusho. PHB zairyo no sekkei to soshikika gijutsu ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-03-01

    With an objective of putting into practical use the wavelength multiplex recording system applied with the PHB phenomenon, research and development has been performed on material systems making high quality hole production possible at high sensitivity and high density. This paper summarizes the achievements in fiscal 1989. In the discussion of PHB materials, measurements were performed on the triple state of zinc, magnesium, copper and iron complexes of tetra-phenyl porphin and the triple state spectra by using the flash decomposition method in order to develop new photo-gate type material systems. Correlation was discovered between the free energy change in the reaction and the PHB reactivity from the result of the experiments, whereas important findings were obtained for designing the photo-gate type PHB material systems. In the discussion of the wavelength multiplex recording, an optical system was designed and fabricated to perform scanning and detection on sample surface by using laser beam squeezed to a diameter of 100 {mu} m. Discussions were given on the wavelength multiplex recording, position multiplex recording, and high-speed recording using this optical system. As a result, position multiplex holes were produced successfully by using the laser beam squeezed to a diameter of 100 {mu} m on four different positions on the sample surface, when the tetra phenylporphin derivative was used. (NEDO)

  2. Effect of catalysts on heterogeneous oxidation of coal

    Energy Technology Data Exchange (ETDEWEB)

    Glazkova, A P; Kazarova, Yu A; Suslov, A V

    1978-01-01

    Analyzes the effects of catalysts on the heterogeneous oxidation of coal in deflagration processes of stoichiometric mixtures. The following substances are studied as catalysts: alkali and alkaline-earth metals, and compounds of copper, lead, chromium, iron, and sulfur. In the first case the catalysts are used in the form of nitrates and the nitrate simultaneously plays the role of an oxidizer. In the second case the catalysts are added to stoichiometric mixtures of ammonium nitrate with carbon. It is shown that during carbon oxidation by nitrates the catalytic efficiency of the metals studied forms the following order: sodium > lead > potassium > barium > aluminium > calcium > magnesium > copper. The calculated and experimental parameters of combustion are given. The problem of dependence of combustion rate on combustion heat, the mechanism of the combustion reaction and the catalytic effects of the additives are discussed. Features of heterogeneous catalysis in the oxidation process of carbon by various oxidizers are analyzed. The investigations on the combustion process are important as the process takes place during explosion of coal dust in underground coal mines and during burning of coal in industrial furnaces. (34 refs.) (In Russian)

  3. Influence of Pulsed Electromagnetic Field on Plant Growth, Nutrient Absorption and Yield of Durum Wheat

    Directory of Open Access Journals (Sweden)

    Nikolaos KATSENIOS

    2015-12-01

    Full Text Available Researchers have adopted the use of magnetic field as a new pre-sowing, environmental friendly technique. Enhancements on plant characteristics with economic impact on producer’s income could be the future of a modern, organic and sustainable agriculture. A field experiment was established at Soil Science Institute of Athens, Lycovrissi, Greece, in the winter of 2014. Two durum wheat cultivars were used. It was a pot experiment with 6 treatments (2 cultivars with 3 magnetic field time exposure. The seeds were treated using a PAPIMI electromagnetic field generator for 0, 30 and 45 minutes one day before planting. The experiment followed a completely randomized design with six treatments and 30 replications. The aim of this study was to evaluate the positive effect of magnetic field pre-sowing treatment in a wide range of plant measurements, including yield. The influence of pulsed electromagnetic field on two varieties of durum wheat seeds showed some statistically significant differences at the 0.05 level in growth measurements, physiological measurements and root growth measurements. Plant tissue analysis showed that magnetic field treatments had higher values than control in total nitrogen, phosphorus, potassium, magnesium, copper (only MF-45, zinc (only MF-30 and boron content, although values showed statistically significant differences only in total nitrogen. The results indicate that this innovative technique can increase the yield of durum wheat, through enhanced absorption of nutrients. Pre-sowing treatment of the seeds leads to vigorous plant growth that are more productive.

  4. Vitamin D, Essential Minerals, and Toxic Elements: Exploring Interactions between Nutrients and Toxicants in Clinical Medicine

    Science.gov (United States)

    Schwalfenberg, Gerry K.; Genuis, Stephen J.

    2015-01-01

    In clinical medicine, increasing attention is being directed towards the important areas of nutritional biochemistry and toxicant bioaccumulation as they relate to human health and chronic disease. Optimal nutritional status, including healthy levels of vitamin D and essential minerals, is requisite for proper physiological function; conversely, accrual of toxic elements has the potential to impair normal physiology. It is evident that vitamin D intake can facilitate the absorption and assimilation of essential inorganic elements (such as calcium, magnesium, copper, zinc, iron, and selenium) but also the uptake of toxic elements (such as lead, arsenic, aluminum, cobalt, and strontium). Furthermore, sufficiency of essential minerals appears to resist the uptake of toxic metals. This paper explores the literature to determine a suitable clinical approach with regard to vitamin D and essential mineral intake to achieve optimal biological function and to avoid harm in order to prevent and overcome illness. It appears preferable to secure essential mineral status in conjunction with adequate vitamin D, as intake of vitamin D in the absence of mineral sufficiency may result in facilitation of toxic element absorption with potential adverse clinical outcomes. PMID:26347061

  5. The Influence of Nickel and Tin Additives on the Microstructural and Mechanical Properties of Al-Zn-Mg-Cu Alloys

    Directory of Open Access Journals (Sweden)

    Haider T. Naeem

    2014-01-01

    Full Text Available The effects of nickel and nickel combined tin additions on mechanical properties and microstructural evolutions of aluminum-zinc-magnesium-copper alloys were investigated. Aluminum alloys containing Ni and Sn additives were homogenized at different temperatures conditions and then aged at 120°C for 24 h (T6 and retrogressed at 180°C for 30 min and then reaged at 120°C for 24 h (RRA. Comparison of the ultimate tensile strength (UTS of as-quenched Al-Zn-Mg-Cu-Ni and Al-Zn-Mg-Cu-Ni-Sn alloys with that of similar alloys which underwent aging treatment at T6 temper showed that gains in tensile strengths by 385 MPa and 370 MPa were attained, respectively. These improvements are attributed to the precipitation hardening effects of the alloying element within the base alloy and the formation of nickel/tin-rich dispersoid compounds. These intermetallic compounds retard the grain growth, lead to grain refinement, and result in further strengthening effects. The outcomes of the retrogression and reaging processes which were carried on aluminum alloys indicate that the mechanical strength and Vickers hardness have been enhanced much better than under the aging at T6 temper.

  6. An extended chemical analysis of gallstone.

    Science.gov (United States)

    Chandran, P; Kuchhal, N K; Garg, P; Pundir, C S

    2007-09-01

    Chemical composition of gall stones is essential for aetiopathogensis of gallstone disease. We have reported quantitative chemical analysis of total cholesterol bilirubin, calcium, iron and inorganic phosphate in 120 gallstones from haryana. To extend this chemical analysis of gall stones by studying more cases and by analyzing more chemical constituents. A quantitative chemical analysis of total cholesterol, total bilirubin, fatty acids, triglycerides, phospholipids, bile acids, soluble proteins, sodium potassium, magnesium, copper, oxalate and chlorides of biliary calculi (52 cholesterol, 76 mixed and 72 pigment) retrieved from surgical operation of 200 patients from Haryana state was carried out. Total cholesterol as the major component and total bilirubin, phospholipids, triglycerides, bile acids, fatty acids (esterified), soluble protein, calcium, magnesium, iron, copper, sodium, potassium, inorganic phosphate, oxalate and chloride as minor components were found in all types of calculi. The cholesterol stones had higher content of total cholesterol, phospholipids, fatty acids (esterified), inorganic phosphate and copper compared to mixed and pigment stones. The mixed stones had higher content of iron and triglycerides than to cholesterol and pigment stones. The pigment stones were richer in total bilirubin, bile acids, calcium, oxalate, magnesium, sodium, potassium, chloride and soluble protein compared to cholesterol and mixed stones. Although total cholesterol was a major component of cholesterol, mixed and pigment gall stone in Haryana, the content of most of the other lipids, cations and anions was different in different gall stones indicating their different mechanism of formation.

  7. Polymer-Coated Urea Delays Growth and Accumulation of Key Nutrients in Aerobic Rice but Does Not Affect Grain Mineral Concentrations

    Directory of Open Access Journals (Sweden)

    Terry J. Rose

    2016-01-01

    Full Text Available Enhanced efficiency nitrogen (N fertilizers (EEFs may improve crop recovery of fertilizer-N, but there is evidence that some EEFs cause a lag in crop growth compared to growth with standard urea. Biomass and mineral nutrient accumulation was investigated in rice fertilized with urea, urea-3,4-dimethylpyrazole phosphate (DMPP and polymer-coated urea (PCU to determine whether any delays in biomass production alter the accumulation patterns, and subsequent grain concentrations, of key mineral nutrients. Plant growth and mineral accumulation and partitioning to grains did not differ significantly between plants fertilized with urea or urea-DMPP. In contrast, biomass accumulation and the accumulation of phosphorus, potassium, calcium, magnesium, copper, zinc and manganese were delayed during the early growth phase of plants fertilized with PCU. However, plants in the PCU treatment ultimately compensated for this by increasing growth and nutrient uptake during the latter vegetative stages so that no differences in biomass or nutrient accumulation generally existed among N fertilizer treatments at anthesis. Delayed biomass accumulation in rice fertilized with PCU does not appear to reduce the total accumulation of mineral nutrients, nor to have any impact on grain mineral nutrition when biomass and grain yields are equal to those of rice grown with urea or urea-DMPP.

  8. Analysis of the chemical components of hydatid fluid from Echinococcus granulosus

    Directory of Open Access Journals (Sweden)

    Li Juyi

    2013-10-01

    Full Text Available Introduction The aim of this study was to explore the environment of Echinococcus granulosus (E. granulosus protoscolices and their relationship with their host. Methods Proteins from the hydatid-cyst fluid (HCF from E. granulosus were identified by proteomics. An inductively coupled plasma atomic emission spectrometer (ICP-AES was used to determine the elements, an automatic biochemical analyzer was used to detect the types and levels of biochemical indices, and an automatic amino acid analyzer was used to detect the types and levels of amino acids in the E. granulosus HCF. Results I Approximately 30 protein spots and 21 peptide mass fingerprints (PMF were acquired in the two-dimensional gel electrophoresis (2-DE pattern of hydatid fluid; II We detected 10 chemical elements in the cyst fluid, including sodium, potassium, calcium, magnesium, copper, and zinc; III We measured 19 biochemical metabolites in the cyst fluid, and the amount of most of these metabolites was lower than that in normal human serum; IV We detected 17 free amino acids and measured some of these, including alanine, glycine, and valine. Conclusions We identified and measured many chemical components of the cyst fluid, providing a theoretical basis for developing new drugs to prevent and treat hydatid disease by inhibiting or blocking nutrition, metabolism, and other functions of the pathogen.

  9. Atomic absorption spectrometry of the leaves of Newbouldia Laevis (Bignoniaceae)

    International Nuclear Information System (INIS)

    Mohammed, L.; Musa, A.; Isma'il, M. B.; Ahmed, Y. A.; Okunade, I.O.; Garba, M. A.

    2011-01-01

    In this study, fresh leaves samples of Newbouldia laevis, a medicinal plant, popularly known as African Border tree used traditionally for the treatment of a number of diseases, were collected in Dakace, (Lat. 11degree05'N Long. 7degree46'E) Zaria, Kaduna State, North-Central Nigeria, during the wet season (October to November) of 2008. The samples were digested using a tri-acid mixture (HNO 3 , HCIO 4 , and H 2 SO 4 ) in the ratio of 25:4:2 respectively. The concentrations of essential trace elements including magnesium, copper, iron, zinc, and cobalt in the samples were determined by Atomic Absorption Spectrometry (AAS). The results obtained showed that Fe has the highest mean concentration of 8.2481±3.689μg/g; whereas Co has the least mean concentration of 0.111±0.055μg/g. The study also revealed that the mean concentrations of Mg, Cu and Zn exceed the recommended limit set by FAO.

  10. NAA Comparison of Nutriens in Egg Yolk and Egg White

    International Nuclear Information System (INIS)

    Ruangdit, S.; Maijan, P.; Channuie, J.; Picha, R.

    2014-01-01

    Food we eat has significant effects on our wellbeing. Eggs are among food products widely consumed and contain many essential nutrients. Yet eggs often are involved in dietary controversy regarding benefit versus risk. The fear of serum cholesterol has driven a large number of people away from consuming egg yolks. In this study, we assessed the nutritional importance of eggs using instrumental neutron activation analysis (INAA) technique at Thai Research Reactor, operating at 1.2 MW. We investigated whether consumers miss any health benefits by choosing to eat only egg whites or yolks rather than whole natural eggs. Essential minerals such as sodium, potassium, manganese, magnesium, copper, selenium, iron and zinc are studied using three NAA loading methods: short-term individual pneumatic transfer system loading using inner-core tubes, medium-term CA3 loading and long-term Lazy Susan (LS) loading for 10 s, 7 h and 3 d, respectively. Two Standard Reference Materials (SRMs) were used to find the nutrient concentrations and validate the method. From the study, we found significant differences in nutritional contents between egg yolks and egg whites. Along with literature review conducted as part of this study, we evaluated the consumption choice when it comes to eggs.

  11. Effects of almond consumption on the reduction of LDL-cholesterol: a discussion of potential mechanisms and future research directions.

    Science.gov (United States)

    Berryman, Claire E; Preston, Amy Griel; Karmally, Wahida; Deckelbaum, Richard J; Kris-Etherton, Penny M

    2011-04-01

    Diet plays a seminal role in the prevention and treatment of cardiovascular disease. Consumption of tree nuts has been shown to reduce low-density lipoprotein cholesterol (LDL-C), a primary target for coronary disease prevention, by 3-19%. Almonds have been found to have a consistent LDL-C-lowering effect in healthy individuals, and in individuals with high cholesterol and diabetes, in both controlled and free-living settings. Almonds are low in saturated fatty acids, rich in unsaturated fatty acids, and contain fiber, phytosterols, and plant protein. Other cardioprotective nutrients unique to almonds include α-tocopherol, arginine, magnesium, copper, manganese, calcium, and potassium. Mechanisms responsible for the LDL-C reduction observed with almond consumption are likely associated with the nutrients almonds provide. Biologically active by nature, these nutrients target primary mechanistic routes of LDL-C reduction, including decreased (re)absorption of cholesterol and bile acid, increased bile acid and cholesterol excretion, and increased LDL-C receptor activity. The nutrients present in almonds may regulate enzymes involved in de novo cholesterol synthesis and bile acid production. Research is needed to understand all mechanisms by which almonds reduce cardiovascular disease risk. © 2011 International Life Sciences Institute.

  12. Development of a thermally stimulated exoelectron emission (TSEE) system for dosimetric applications

    International Nuclear Information System (INIS)

    Rocha, Felicia del Gallo

    1997-01-01

    A thermally stimulated exoelectron emission measuring system (TSEE) with a counting (reader) and a heating system was designed, constructed and tested for the dosimetry of weakly penetrating radiations, such as alpha and beta particles and low energy X rays. The counting system consists of a 271 windowless gas-flow proportional counter, while the heating system is composed by a temperature programmer that provides linear heating of the samples. The characterization of the proportional counter was done, as well as the tests to verify the performance of the counting system with reference TSEE materials, such as beryllium oxide (BeO) and magnesium oxide (MgO) single crystals. The dosimetric characteristics of some materials as pure calcium sulphate (CaS0 4 ) sintered pellets and with 10% of graphite in its composition, lithium fluoride doped with magnesium, copper and phosphor (LiF:Mg,Cu,P), lithium fluoride (LiF) thin films on aluminum and stainless steel substrates and BeO on graphite substrates were studied. As an application, the feasibility of the use of pure calcium sulphate sintered pellets and others with 10% of graphite in area monitoring of an electron accelerator with variable energy was studied. The obtained results show the usefulness of this system in the dosimetry of weakly penetrating radiations. (author)

  13. Scientific Background for Processing of Aluminum Waste

    Science.gov (United States)

    Kononchuk, Olga; Alekseev, Alexey; Zubkova, Olga; Udovitsky, Vladimir

    2017-11-01

    Changing the source of raw materials for producing aluminum and the emergence of a huge number of secondary alumina waste (foundry slag, sludge, spent catalysts, mineral parts of coal and others that are formed in various industrial enterprises) require the creation of scientific and theoretical foundations for their processing. In this paper, the aluminum alloys (GOST 4784-97) are used as an aluminum raw material component, containing the aluminum component produced as chips in the machine-building enterprises. The aluminum waste is a whole range of metallic aluminum alloys including elements: magnesium, copper, silica, zinc and iron. Analysis of the aluminum waste A1- Zn-Cu-Si-Fe shows that depending on the content of the metal the dissolution process of an aluminum alloy should be treated as the result of the chemical interaction of the metal with an alkaline solution. It is necessary to consider the behavior of the main components of alloys in an alkaline solution as applied to the system Na2O - Al2O3 - SiO2 - CO2 - H2O.

  14. Tl response of LiF:Mg, Cu, P + PTFE to Am-Be neutrons

    International Nuclear Information System (INIS)

    Gonzalez M, P.R.

    2000-01-01

    In different laboratories of the world it is followed the research about development of new Tl materials, whose main characteristics should be their equivalence with the tissue and their high sensibility to any type of radiation. The study consists in to measure the Tl peak intensity which TLD-100 presents at being irradiated with neutrons and that appears over 250 Centigrade, for compare it with the Tl intensity of the LiF: Mg, Cu, P + PTFE dosemeters. However, not all dosemeters of the same group show the interesting peak, by this only can be the total Tl intensity of dosemeters studied. In the ININ dosemeters development laboratory, we have developed a Tl material of lithium fluoride activated with magnesium, copper and phosphorus (LiF: Mg, Cu, P) that in polycrystalline powder form is almost 35 times more sensitive than the TLD-100 commercial dosemeter of Harshaw/Filtrol, USA. With the use of polytetrafluorethylene (PTFE) and with the above described Tl material, it has been possible to obtain dosemeters in pellet form of LiF: Mg, Cu, P + PTFE. (Author)

  15. Influence of printing speed on production of embossing tools using FDM 3D printing technology

    Directory of Open Access Journals (Sweden)

    Jelena Žarko

    2017-06-01

    Full Text Available Manufacturing of the embossing tools customary implies use of metals such as zinc, magnesium, copper, and brass. In the case of short run lengths, a conventional manufacturing process and the material itself represent a significant cost, not only in the terms of material costs and the need for using complex technological systems which are necessary for their production, but also in the terms of the production time. Alternatively, 3D printing can be used for manufacturing similar embossing tools with major savings in production time and costs. However, due to properties of materials used in the 3D printing technology, expected results of embossing by 3D printed tools cannot be identical to metal ones. This problem is emphasized in the case of long run lengths and high accuracy requirement for embossed elements. The objective of this paper is primarily focused on investigating the influence of the printing speed on reproduction quality of the embossing tools printed with FDM (Fused Deposition Modelling technology. The obtained results confirmed that printing speed as a process parameter affects the reproduction quality of the embossing tools printed with FDM technology: in the case of deposition rate of 90 mm/s was noted the poorest dimensional accuracy in relation to the 3D model, which is more emphasised in case of circular and square elements. Elements printed with the highest printing speed have a greater dimensional accuracy, but with evident cracks on the surface.

  16. Fading of the Tl signal in LiF: Mg, Cu, P during a large post irradiation period

    International Nuclear Information System (INIS)

    Gonzalez, P.R.; Azorin, J.; Furetta, C.

    2004-01-01

    In this work the obtained results of the study of the fading of the Tl signal in dosemeters of LiF activated with magnesium, copper and phosphorus (LiF:Mg,Cu,P) are presented. The studied dosemeters were LiF: Mg,Cu,P + Ptfe, developed in the ININ, taking like reference to the commercial dosemeter GR200A of Chinese manufacture. In both cases the Tl curve presents four peaks; in LiF: Mg,Cu,P + Ptfe, the peaks of smaller size appear in 359 K, 389 K and 447 K, the main dosimetric peak appears in 486 K; in GR200A, the peaks of smaller size appear in 360 K, 389 K and 445 K; while the main dosimetric peak appears in 487 K. The highest fading shown by the dosemeters of LiF: Mg,Cu,P + Ptfe, it was of 3.07%, value very below the one recommended for dosimetric purposes. While the commercial dosemeters presented a fading until of 6.23%, surpassing with the recommended values. The observed fading, it corresponds to the lost of the Tl signal of the peaks 1 and 2, since the first one disappears few hours after the irradiation, while the peak 2, it disappears completely after 94 days, the peak 3 remained stable during the six months of study, while the peak 4, it showed a slight increment due to the contribution of the dose of natural environmental radiation. (Author)

  17. Foliar mineral composition, fertilization and dieback of Norway spruce in the Belgian Ardennes.

    Science.gov (United States)

    Van Praag, H J; Weissen, F

    1986-09-01

    Needles from healthy Norway spruce (Picea abies (L.) Karst.) at Willerzie in the West Ardennes and from trees with symptoms of dieback at Langesthal in the East Ardennes were analyzed by age class for mineral composition. Both stands were on acid oligotrophic soils. At Willerzie, needles were sampled from plots fertilized 12 to 17 years earlier (dolomitic lime plus N, P and K) as well as unfertilized plots. Effects of fertilization included increased levels of calcium, manganese, phosphorus, and copper and reduced levels of total sulfur, sulfate-S, sulfate-S:total S, potassium and aluminum. Levels of calcium, magnesium, copper and boron were low at both sites and, at Langesthal, calcium and magnesium may have been deficient. Sulfur level was normal at Willerzie, but at Langesthal, mean sulfur content for needles of all age classes was 198 mg 100 g(-1) dry weight, a level that may be toxic. In older needles, the N:S ratio at Langesthal was below the threshold value of eight reported to be necessary for healthy growth. Other symptoms of stress observed were high sulfate-S:total S and nitrate-N:total N ratios. At Langesthal, manganese level was probably adequate although only one-fifth the level at Willerzie. Levels of aluminum and iron were very high at both sites. Most of the iron and much of the aluminum occurred as a surface deposit that could be removed by washing the needles in chloroform.

  18. Water quality analysis of the commercial boreholes in Mubi Metropolis, Adamawa State, Nigeria: geographic information system approach.

    Science.gov (United States)

    Mayomi, Ikusemoran; Elisha, Ibrahim

    2011-12-01

    It is observed that most of the commercial boreholes in Mubi Metropolis are located along River Yedzeram which is the main river that runs across the town. Unfortunately, due to the geographical location of the town in savanna region with minimal water supply, water related small scale industries such as sachet water, block making, irrigation agriculture, cloth dying, car wash and other pollution activities such as mechanical workshops and public toilets are also located along the same River Yedzeram. Moreover, the inhabitants of the town either dump their refuse in the River or spread it on their farmlands as there is no provision of refuse dump site by the government. Therefore, five parameters (Nitrate, Magnesium, Copper, Calcium and Iron) were used to test thewater quality of water samples that were collected from twenty two commercial boreholes along the river, using the standard examination of water and waste water of the World Health Organization to determine the water quality of the boreholes. The study revealed that only eight out of the twenty two boreholes are of good quality, while the others are either of bad quality or not portable. ArcGIS 9.2 and ILWIS 3.3 software were used to analyze the laboratory results through the use of SQL queries. It was recommended that the government should provide portable water, establish water quality control board and make use of GIS for creation of database and analysis.

  19. Composition and Biological Properties of Agaricus bisporus Fruiting Bodies – a Review

    Directory of Open Access Journals (Sweden)

    Muszyńska Bożena

    2017-09-01

    Full Text Available White Agaricus bisporus is both the most popular and the most commonly eaten edible mushroom species in the world. It is popular not only because of its taste, but also due to its high level of nutrients: dietary fiber (chitin, essential, semi-essential amino acids, unsaturated fatty acids including linoleic and linolenic acids, easily digestible proteins, sterols, phenolic and indole compounds, and vitamins − especially provitamin D2 and B1, B2, B6, B7, and C. Fruiting bodies of A. bisporus have antioxidant, antibacterial, anti-inflammatory, antitumor, and immunomodulatory activity. The presence of antioxidant ergothioneine (which also displays the antimutagenic, chemo- and radioprotective activity is also noteworthy. A. bisporus also contains derivatives of benzoquinone, a substance which belongs to the group of antibiotics. Studies of tyrosinase isolated from this species show its very high similarity to human tyrosinase. This points directly to the fact that this species could be a rich source of tyrosinase used for medicinal and cosmetics purposes. A. bisporus is also a rich source of selenium, zinc and other elements such as magnesium, copper, iron, potassium, sodium, calcium, phosphorus, sulfur or manganese. In conclusion, the presence of these compounds and elements with biological activity in fruiting bodies of A. bisporus confirms their nutraceutical and medicinal properties.

  20. Fading of the Tl signal in LiF: Mg, Cu, P during a large post irradiation period; Desvanecimiento de la senal Tl en LiF: Mg, Cu, P durante un largo periodo posradiacion

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, P.R. [ININ, A.P. 18-1027, 11801 Mexico D.F. (Mexico); Azorin, J. [UAM-I, 09340 Mexico D.F. (Mexico); Furetta, C. [Universidad de Roma, Piazzale Aldo Moro 2, Roma (Italy)

    2004-07-01

    In this work the obtained results of the study of the fading of the Tl signal in dosemeters of LiF activated with magnesium, copper and phosphorus (LiF:Mg,Cu,P) are presented. The studied dosemeters were LiF: Mg,Cu,P + Ptfe, developed in the ININ, taking like reference to the commercial dosemeter GR200A of Chinese manufacture. In both cases the Tl curve presents four peaks; in LiF: Mg,Cu,P + Ptfe, the peaks of smaller size appear in 359 K, 389 K and 447 K, the main dosimetric peak appears in 486 K; in GR200A, the peaks of smaller size appear in 360 K, 389 K and 445 K; while the main dosimetric peak appears in 487 K. The highest fading shown by the dosemeters of LiF: Mg,Cu,P + Ptfe, it was of 3.07%, value very below the one recommended for dosimetric purposes. While the commercial dosemeters presented a fading until of 6.23%, surpassing with the recommended values. The observed fading, it corresponds to the lost of the Tl signal of the peaks 1 and 2, since the first one disappears few hours after the irradiation, while the peak 2, it disappears completely after 94 days, the peak 3 remained stable during the six months of study, while the peak 4, it showed a slight increment due to the contribution of the dose of natural environmental radiation. (Author)

  1. Geochemical studies of abyssal lavas recovered by DSRV Alvin from Eastern Galapagos Rift, Inca Transform, and Ecuador Rift: 2. Phase chemistry and crystallization history

    Science.gov (United States)

    Perfit, Michael R.; Fornari, Daniel J.

    1983-12-01

    A diverse suite of lavas recovered by DSRV Alvin from the eastern Galapagos rift and Inca transform includes mid-ocean ridge tholeiitic basalts (MORB), iron- and titanium-enriched basalts (FeTi basalts), and abyssal andesites. Rock types transitional in character (ferrobasalts and basaltic andesites) were also recovered. The most mafic glassy basalts contain plagioclase, augite, and olivine as near-liquidus phases, whereas in more fractionated basalts, pigeonite replaces olivine and iron-titanium oxides crystallize. Plagioclase crystallizes after pyroxenes and iron-titanium oxides in andesites, possibly due to increased water contents or cooling rates. Apatite phenocrysts are present in some andesitic glasses. Ovoid sulfide globules are also common in many lavas. Compositional variations of phenocrysts in glassy lavas reflect changes in magma chemistry, temperature of crystallization, and cooling rate. The overall chemical variations parallel the chemical evolution of the lava suite and are similar to those in other fractionated tholeiitic complexes. Elemental partitioning between plagioclase-, pyroxene-, and olivine-glass pairs suggests that equilibration occurred at low pressure in a rather restricted temperature range. Various geothermometers indicate that the most primitive MORB began to crystallize between 1150° and 1200°C with fo2 PH 2 o could have been as high as 1 kbar during andesite crystallization. Compositions of the lavas from the Galapagos rift follow the experimentally determined (1 atm-QFM) liquid line of descent. Least squares calculations for the major elements indicate that the entire suite of lavas can be produced by fractional crystallization of successive residual liquids from a MORB parent magma. FeTi basalts represent 30-65 cumulative weight percent crystallization of plagioclase, augite, and olivine. An additional 30-50% fractionation of pyroxenes, plagioclase, titanomagnetite, and possible apatite is required to generate andesite from Fe

  2. Characterization and petrologic interpretation of olivine-rich basalts at Gusev Crater, Mars

    Science.gov (United States)

    McSween, H.Y.; Wyatt, M.B.; Gellert, Ralf; Bell, J.F.; Morris, R.V.; Herkenhoff, K. E.; Crumpler, L.S.; Milam, K.A.; Stockstill, K.R.; Tornabene, L.L.; Arvidson, R. E.; Bartlett, P.; Blaney, D.; Cabrol, N.A.; Christensen, P.R.; Clark, B. C.; Crisp, J.A.; Des Marais, D.J.; Economou, T.; Farmer, J.D.; Farrand, W.; Ghosh, A.; Golombek, M.; Gorevan, S.; Greeley, R.; Hamilton, V.E.; Johnson, J. R.; Joliff, B.L.; Klingelhofer, G.; Knudson, A.T.; McLennan, S.; Ming, D.; Moersch, J.E.; Rieder, R.; Ruff, S.W.; Schrorder, C.; de Souza, P.A.; Squyres, S. W.; Wanke, H.; Wang, A.; Yen, A.; Zipfel, J.

    2006-01-01

    Rocks on the floor of Gusev crater are basalts of uniform composition and mineralogy. Olivine, the only mineral to have been identified or inferred from data by all instruments on the Spirit rover, is especially abundant in these rocks. These picritic basalts are similar in many respects to certain Martian meteorites (olivine-phyric shergottites). The olivine megacrysts in both have intermediate compositions, with modal abundances ranging up to 20-30%. Associated minerals in both include low-calcium and high-calcium pyroxenes, plagioclase of intermediate composition, iron-titanium-chromium oxides, and phosphate. These rocks also share minor element trends, reflected in their nickel-magnesium and chromium-magnesium ratios. Gusev basalts and shergottites appear to have formed from primitive magmas produced by melting an undepleted mantle at depth and erupted without significant fractionation. However, apparent differences between Gusev rocks and shergottites in their ages, plagioclase abundances, and volatile contents preclude direct correlation. Orbital determinations of global olivine distribution and compositions by thermal emission spectroscopy suggest that olivine-rich rocks may be widespread. Because weathering under acidic conditions preferentially attacks olivine and disguises such rocks beneath alteration rinds, picritic basalts formed from primitive magmas may even be a common component of the Martian crust formed during ancient and recent times. Copyright 2006 by the American Geophysical Union.

  3. Purification of melt-spun metallurgical grade silicon micro-flakes through a multi-step segregation procedure

    Science.gov (United States)

    Martinsen, F. A.; Nordstrand, E. F.; Gibson, U. J.

    2013-01-01

    Melt-spun metallurgical grade (MG) micron dimension silicon flakes have been purified into near solar grade (SG) quality through a multi-step melting and re-solidification procedure. A wet oxidation-applied thermal oxide maintained the sample morphology during annealing while the interiors were melted and re-solidified. The small thickness of the flakes allowed for near elimination of in-plane grain boundaries, with segregation enhanced accumulation of impurities at the object surface and in the few remaining grain boundaries. A subsequent etch in 48% hydrofluoric acid (HF) removed the impure oxide layer, and part of the contamination at the oxide-silicon interface, as shown by electron dispersive spectroscopy (EDS) and backscattered electron imaging (BEI). The sample grains were investigated by electron back-scattered diffraction (EBSD) after varying numbers of oxidation-annealing-etch cycles, and were observed to grow from ˜5 μm to ˜200 μm. The concentration of iron, titanium, copper and aluminium were shown by secondary ion mass spectroscopy (SIMS) and inductively coupled plasma mass spectroscopy (ICPMS) to drop between five and six orders of magnitude. The concentration of boron was observed to drop approximately one order of magnitude. A good correlation was observed between impurity removal rates and segregation models, indicating that the purification effect is mainly caused by segregation. Deviations from these models could be explained by the formation of oxides and hydroxides later removed through etching.

  4. Facile fabrication of mesoporous Fe-Ti-SBA15 silica with enhanced visible-light-driven simultaneous photocatalytic degradation and reduction reactions

    Science.gov (United States)

    Chang, Fei; Jiao, Mingzhi; Xu, Quan; Deng, Baoqing; Hu, Xuefeng

    2018-03-01

    A series of mesoporous iron-titanium-containing silica Fe-TiO2-SBA15 (FTS) were constructed via a facile one-pot hydrothermal route and subsequently characterized by X-ray diffraction patterns, UV-vis diffuse reflection spectroscopy, transmission electron microscopy, scanning electron microscopy, nitrogen adsorption-desorption, X-ray photoelectron spectroscopy, and X-ray energy dispersion spectroscopy. By analyses, these samples possessed ordered two-dimensional hexagonal mesoporous structures, mainly involving mixed dual-phases of anatase and rutile TiO2, like commercial titania P25. The UV-vis diffuse reflection spectra demonstrated the presence of Fe species that was further confirmed by the X-ray photoelectron spectra and X-ray energy dispersion spectrum. The existence of Fe species in form of Fe3+ cations played an important role on the phase composition and electronic structure of these samples. With structural and morphological merits, these samples exhibited relatively high photocatalytic efficiency toward the degradation of dye methylene blue (MB) and reduction of Cr(VI) under visible-light irradiation, comparing with P25. In addition, among all candidates, the sample with a Fe/Si molar ratio of 0.03 showed the highest catalytic performance under optimal conditions, especially in the coexistence of both MB and Cr(VI), revealing an obviously synergistic effect when the consumption of both contaminants occurred. Finally, a primary catalytic mechanism was speculated on basis of active species capture experiments.

  5. Field determination of microgram quantities of niobium in rocks

    Science.gov (United States)

    Ward, F.N.; Marranzino, A.P.

    1955-01-01

    A rapid, simple, and moderately accurate method was needed for the determination of traces of niobium in rocks. The method developed is based on the reaction of niobium(V) with thiocyanate ion in a 4M hydrochloric acid and 0.5M tartaric acid medium, after which the complex is extracted with ethyl ether. The proposed procedure is applicable to rocks containing from 50 to 2000 p.p.m. of niobium, and, with modifications, can be used on rocks containing larger amounts. Five determinations on two rocks containing 100 p.p.m. or less of niobium agree within 5 p.p.m. of the mean, and the confidence limits at the 95% level are, respectively, ??6 and ??4 p.p.m. The addition of acetone to the ether extract of the niobium thiocyanate inhibits the polymerization of the thiocyanate ion and stabilizes the solution for at least 20 hours. The proposed procedure permits the determination of 20 ?? of niobium in the presence of 1000 ?? of iron, titanium, or uranium; 500 ?? of vanadium; or 100 ?? of tungsten or molybdenum or both.

  6. Influence of Froth Height on Column Flotation of Kaolin Ore

    Directory of Open Access Journals (Sweden)

    Fernando Pita

    2017-11-01

    Full Text Available The influence of the froth height in the reverse flotation of kaolinitic ore was analyzed based on the recovery by entrainment and by true flotation of iron, titanium and manganese oxides (FeO, TiO2 and MnO. Also, the influence of the particle size in the drainage process was analyzed. The recovery by entrainment and by true flotation of the three oxides is inversely proportional to the froth height. The entrained particles are drained more easily in the froth phase than the floated particles since they are not attached to the bubbles. The recovery by entrainment and drainage of the entrained material is similar for the three oxides. However, the recovery by true flotation and drainage of the floated material is different for the three oxides. FeO has the lowest recovery, as a consequence of the minor contribution of its hydrophobic minerals, while MnO has the greatest recovery values. For the entrained material, the finest fraction is entrained more easily, but it is also drained more easily, meaning these particles have more mobility in the froth zone. For the true floated material, the finest fraction is drained more easily, indicating the greater mobility of these particles in the froth; however, the coarsest fraction is drained more easily than the two intermediate fractions, indicating the weaker attachment of the larger particles to the bubbles.

  7. Transformation using peroxide of a crude thorium hydroxide in nitrate for mantle grade

    International Nuclear Information System (INIS)

    Freitas, Antonio Alves de; Carvalho, Fatima Maria Sequeira de; Ferreira, Joao Coutinho; Abrao, Alcidio

    2002-01-01

    An alternative process for the recovery and purification of thorium starting from a crude thorium hydroxide as the precursor is outlined in this paper. Its composition is 60.1% thorium oxide (ThO 2 ), 18.6% rare earth oxides (TR 2 O 3 ), and common impurities like silicium, iron, titanium, lead and sodium. This material was produced industrially from the monazite processing in Brazil and has been stocked since several years. The crude thorium hydroxide is treated with hot nitric acid and after the digestion and addition of floculant it is filtered for the separation of the insoluble fraction. Using this nitrate solution, the thorium peroxide is precipitated after adjustment of pH and controlled addition of hydrogen peroxide. The final thorium peroxide is dissolved with nitric acid and the resulting thorium nitrate is mantle grade quality. Rare earth elements are recovered from the thorium peroxide filtrate. The main process parameters for the peroxide precipitation, like pH and temperature and main the results are presented and discussed. (author)

  8. Local vs Nonlocal States in FeTiO3 Probed with 1s2pRIXS: Implications for Photochemistry.

    Science.gov (United States)

    Hunault, Myrtille O J Y; Khan, Wilayat; Minár, Jan; Kroll, Thomas; Sokaras, Dimosthenis; Zimmermann, Patric; Delgado-Jaime, Mario U; de Groot, Frank M F

    2017-09-18

    Metal-metal charge transfer (MMCT) is expected to be the main mechanism that enables the harvesting of solar light by iron-titanium oxides for photocatalysis. We have studied FeTiO 3 as a model compound for MMCT with 1s2pRIXS at the Fe K-edge. The high-energy resolution XANES enables distinguishing five pre-edge features. The three first well distinct RIXS features are assigned to electric quadrupole transitions to the localized Fe* 3d states, shifted to lower energy by the 1s core-hole. Crystal field multiplet calculations confirm the speciation of divalent iron. The contribution of electric dipole absorption due to local p-d mixing allowed by the trigonal distortion of the cation site is supported by DFT and CFM calculations. The two other nonlocal features are assigned to electric dipole transitions to excited Fe* 4p states mixed with the neighboring Ti 3d states. The comparison with DFT calculations demonstrates that MMCT in ilmenite is favored by the hybridization between the Fe 4p and delocalized Ti 3d orbitals via the O 2p orbitals.

  9. Experimental reduction of simulated lunar glass by carbon and hydrogen and implications for lunar base oxygen production

    International Nuclear Information System (INIS)

    Mckay, D.S.; Morris, R.V.; Jurewicz, A.J.

    1991-01-01

    The most abundant element in lunar rocks and soils is oxygen which makes up approximately 45 percent by weight of the typical lunar samples returned during the Apollo missions. This oxygen is not present as a gas but is tightly bound to other elements in mineral or glass. When people return to the Moon to explore and live, the extraction of this oxygen at a lunar outpost may be a major goal during the early years of operation. Among the most studied processes for oxygen extraction is the reduction of ilmenite by hydrogen gas to form metallic iron, titanium oxide, and oxygen. A related process is proposed which overcomes some of the disadvantages of ilmenite reduction. It is proposed that oxygen can be extracted by direct reduction of native lunar pyroclactic glass using either carbon, carbon monoxide, or hydrogen. In order to evaluate the feasibility of this proposed process a series of experiments on synthetic lunar glass are presented. The results and a discussion of the experiments are presented

  10. Damage induced by swift heavy ions in a pure metallic target: iron. Experimental results and numerical simulation

    International Nuclear Information System (INIS)

    Legrand, P.

    1993-01-01

    The damage induced when a high energy deposition occurs in the electronic system of a pure metal (Ag, Co, Fe, Ni, Pd, Pt, Ti, W, Zr) has been investigated using two methods: low temperature swift heavy ion (O, Ar, Kr, Xe, Pb, u) irradiations and computer simulations by molecular dynamics. Irradiations reveal that up to now, it is only in iron, titanium, cobalt and zirconium targets that high levels of energy deposition in electronic excitations lead to a new mechanism of defect creation in addition to the effects of elastic collisions. This mechanism might be the Coulomb explosion: the incident ion creates in its wake a cylinder of highly ionized matter; Coulomb repulsions of short duration in metallic targets could then set a great number of neighbouring atoms into motion and lead to permanent atomic displacements. Using molecular dynamics, we confirm that atomic displacements can indeed occur when neighbouring perturbated atoms receive even a very small amount of kinetic energy (≤ 1 eV). This happens only if the repulsive movements are collective and coherent. Defect creation and annealing of preexisting defects which occur in iron at different energy deposition levels are successfully simulated. An original empirical N-body potential, allowing a realistic description of the bulk properties of the body centered cubic iron, is used. (author). refs., figs., tabs

  11. Study of the influence of temperature and time on the electroplating nickel layer in Inconel 718 strips used in spacer grid of Pressurized Water Cooled nuclear reactors (PWR)

    Energy Technology Data Exchange (ETDEWEB)

    Rezende, Renato; Abati, Amanda; Verne, Júlio; Panossian, Zehbour, E-mail: amanda.abati@marinha.mil.br, E-mail: jvernegropp@gmail.com, E-mail: renato.rezende@marinha.mil.br, E-mail: zep@ipt.br [Centro Tecnológico da Marinha em São Paulo (CTMSP), São Paulo, SP (Brazil). Laboratório de Desenvolvimento e Instrumentação de Combustível Nuclear; Instituto de Pesquisas Tecnológicas (IPT), São Paulo, SP (Brazil)

    2017-07-01

    The Inconel 718 (UNS N07718: Ni-{sup 19}Cr-{sup 18}Fe-{sup 5}Nb-3 Mo) is a precipitation hardenable nickel alloy that has good corrosion resistance and high mechanical strength. These strips are used for assembling the spacer grid of fuel element of pressurized water cooled nuclear reactors (PWR). The spacer grid is a structural component of fundamental importance in fuel elements of PWR reactors, maintaining the position and necessary spacing of the fuel rods within the arrangement of the fuel element. The spacer grid is formed by joining the points of intersection of the strips, by a joint process called brazing. For this process, these strips are stamped and plated with a thin layer of nickel by means of electroplating in order to protect against oxidation and allow a better flowability and wettability of the addition metal in the strips during brazing. Oxidation at the surface of the base material harms wettability and inhibits spreading of the liquid addition metal on the substrate surface during the brazing process. The use of coatings such as nickel plating is used to ensure such conditions. The results showed that there is a process of diffusion de some chemical elements such as chromium, iron, titanium and aluminum from the substrate to the nickel layer and nickel from the layer to the substrate. These chemical elements are responsible for the oxidation at the surface of the strip. (author)

  12. Properties of Retinal Precursor Cells Grown on Vertically Aligned Multiwalled Carbon Nanotubes Generated for the Modification of Retinal Implant-Embedded Microelectrode Arrays.

    Science.gov (United States)

    Johnen, Sandra; Meißner, Frank; Krug, Mario; Baltz, Thomas; Endler, Ingolf; Mokwa, Wilfried; Walter, Peter

    2016-01-01

    Background. To analyze the biocompatibility of vertically aligned multiwalled carbon nanotubes (MWCNT), used as nanomodification to optimize the properties of prostheses-embedded microelectrodes that induce electrical stimulation of surviving retinal cells. Methods. MWCNT were synthesized on silicon wafers. Their growth was achieved by iron particles (Fe) or mixtures of iron-platinum (Fe-Pt) and iron-titanium (Fe-Ti) acting as catalysts. Viability, growth, adhesion, and gene expression of L-929 and retinal precursor (R28) cells were analyzed after nondirect and direct contact. Results. Nondirect contact had almost no influence on cell growth, as measured in comparison to reference materials with defined levels of cytotoxicity. Both cell types exhibited good proliferation properties on each MWCNT-coated wafer. Viability ranged from 95.9 to 99.8%, in which better survival was observed for nonfunctionalized MWCNT generated with the Fe-Pt and Fe-Ti catalyst mixtures. R28 cells grown on the MWCNT-coated wafers showed a decreased gene expression associated with neural and glial properties. Expression of the cell cycle-related genes CCNC, MYC, and TP53 was slightly downregulated. Cultivation on plasma-treated MWCNT did not lead to additional changes. Conclusions. All tested MWCNT-covered slices showed good biocompatibility profiles, confirming that this nanotechnology is a promising tool to improve prostheses bearing electrodes which connect with retinal tissue.

  13. Properties of Retinal Precursor Cells Grown on Vertically Aligned Multiwalled Carbon Nanotubes Generated for the Modification of Retinal Implant-Embedded Microelectrode Arrays

    Directory of Open Access Journals (Sweden)

    Sandra Johnen

    2016-01-01

    Full Text Available Background. To analyze the biocompatibility of vertically aligned multiwalled carbon nanotubes (MWCNT, used as nanomodification to optimize the properties of prostheses-embedded microelectrodes that induce electrical stimulation of surviving retinal cells. Methods. MWCNT were synthesized on silicon wafers. Their growth was achieved by iron particles (Fe or mixtures of iron-platinum (Fe-Pt and iron-titanium (Fe-Ti acting as catalysts. Viability, growth, adhesion, and gene expression of L-929 and retinal precursor (R28 cells were analyzed after nondirect and direct contact. Results. Nondirect contact had almost no influence on cell growth, as measured in comparison to reference materials with defined levels of cytotoxicity. Both cell types exhibited good proliferation properties on each MWCNT-coated wafer. Viability ranged from 95.9 to 99.8%, in which better survival was observed for nonfunctionalized MWCNT generated with the Fe-Pt and Fe-Ti catalyst mixtures. R28 cells grown on the MWCNT-coated wafers showed a decreased gene expression associated with neural and glial properties. Expression of the cell cycle-related genes CCNC, MYC, and TP53 was slightly downregulated. Cultivation on plasma-treated MWCNT did not lead to additional changes. Conclusions. All tested MWCNT-covered slices showed good biocompatibility profiles, confirming that this nanotechnology is a promising tool to improve prostheses bearing electrodes which connect with retinal tissue.

  14. Clays for brick manufacturing in Actopan, Hidalgo: physical, chemical and mineralogical characterization

    Energy Technology Data Exchange (ETDEWEB)

    Moreno-Tovar, Raul; Yañez-Hernández, Osiris Annel; Pérez-Moreno, Fidel; Rodríguez-Lugo, Ventura [Área de Ciencias de la Tierra y Materiales, Universidad Autónoma del Estado de Hidalgo (Mexico); Rivera, José de Jesús Cruz [Universidad Autónoma de San Luis Potosí (Mexico); Rivera, Ana Leonor, E-mail: analeonor.ventura.2016@gmail.com [Universidad Nacional Autónoma de México, DF (Mexico)

    2017-10-15

    Samples of clays from Actopan, Hidalgo employed in brick manufacturing are physical, chemical and mineralogical characterized. Transmitted polarized light microscopy showed a uniform particle size with grain morphology characteristic of euhedral crystals with quartz, feldspars, nontronite, and iron oxides particles. Scanning Electron Microscopy revealed 75 μm to 90 μm wide subhedral structures formed by particles from 2.0 μm to 5.0 μm; and rombohedrales forms 40 μm wide, 70 µm long, constituted of silicon, aluminum, iron, titanium, calcium, minor amounts of potassium, magnesium, and sodium. Minerals such as quartz, albite, cristobalite, calcium and Hematite phases were recognized by X-Ray Diffraction technique. Chemical analysis by atomic emission spectrometry with Inductively Coupled Plasma confirmed this mineralogy composition while laser granulometry method found the same particle size. Grain size analysis determined submicrometric dimensions, and multimodal type curves, that can be interpreted as the mixing of two or more different mineral phases in each sample. (author)

  15. Clays for brick manufacturing in Actopan, Hidalgo: physical, chemical and mineralogical characterization

    International Nuclear Information System (INIS)

    Moreno-Tovar, Raul; Yañez-Hernández, Osiris Annel; Pérez-Moreno, Fidel; Rodríguez-Lugo, Ventura; Rivera, José de Jesús Cruz; Rivera, Ana Leonor

    2017-01-01

    Samples of clays from Actopan, Hidalgo employed in brick manufacturing are physical, chemical and mineralogical characterized. Transmitted polarized light microscopy showed a uniform particle size with grain morphology characteristic of euhedral crystals with quartz, feldspars, nontronite, and iron oxides particles. Scanning Electron Microscopy revealed 75 μm to 90 μm wide subhedral structures formed by particles from 2.0 μm to 5.0 μm; and rombohedrales forms 40 μm wide, 70 µm long, constituted of silicon, aluminum, iron, titanium, calcium, minor amounts of potassium, magnesium, and sodium. Minerals such as quartz, albite, cristobalite, calcium and Hematite phases were recognized by X-Ray Diffraction technique. Chemical analysis by atomic emission spectrometry with Inductively Coupled Plasma confirmed this mineralogy composition while laser granulometry method found the same particle size. Grain size analysis determined submicrometric dimensions, and multimodal type curves, that can be interpreted as the mixing of two or more different mineral phases in each sample. (author)

  16. Uranium tailings reference materials

    International Nuclear Information System (INIS)

    Smith, C.W.; Steger, H.F.; Bowman, W.S.

    1984-01-01

    Samples of uranium tailings from Bancroft and Elliot Lake, Ontario, and from Beaverlodge and Rabbit Lake, Saskatchewan, have been prepared as compositional reference materials at the request of the National Uranium Tailings Research Program. The four samples, UTS-1 to UTS-4, were ground to minus 104 μm, each mixed in one lot and bottled in 200-g units for UTS-1 to UTS-3 and in 100-g units for UTS-4. The materials were tested for homogeneity with respect to uranium by neutron activation analysis and to iron by an acid-decomposition atomic absorption procedure. In a free choice analytical program, 18 laboratories contributed results for one or more of total iron, titanium, aluminum, calcium, barium, uranium, thorium, total sulphur, and sulphate for all four samples, and for nickel and arsenic in UTS-4 only. Based on a statistical analysis of the data, recommended values were assigned to all elements/constituents, except for sulphate in UTS-3 and nickel in UTS-4. The radioactivity of thorium-230, radium-226, lead-210, and polonium-210 in UTS-1 to UTS-4 and of thorium-232, radium-228, and thorium-228 in UTS-1 and UTS-2 was determined in a radioanalytical program composed of eight laboratories. Recommended values for the radioactivities and associated parameters were calculated by a statistical treatment of the results

  17. Hydrogen compatibility of structural materials for energy storage and transmission applications. Semiannual report for period through October 1, 1976

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, S.L. (comp.)

    1976-12-01

    Substantial support activities for Brookhaven National Laboratory (BNL) have been completed since the initiation of this program. The suitability of commercial alloys for containment of hydride-dehydride reactions have been assessed, and recommendations for materials selection based upon tensile and slow crack growth tests have been made. We have also prepared and installed in a test chamber at BNL a series of in-situ test specimens to be exposed to a cyclic iron-titanium hydride environment. Future BNL support activities will include welding/joining specification development and a post-mortem examination of the in-situ test specimens. Efforts are becoming more oriented to materials development and to the development of specifications for the use of structural steels in hydrogen environment. BNL's hydride storage program has been supported during the last six months by supplying 80 self-loaded tensile specimens for accelerated testing in an FeTiH/sub x/ test bed. A preliminary welding specification for containment of hydrogen in structural mild steels has been developed. Hydrogen permeation resistant coatings, applied by pyrolysis of silane, and by brush electroplating, have been developed. Environmentally assisted, cyclic fatigue in high-pressure hydrogen has been identified as a potential hazard to the integrity of flawed pressure vessels in materials where slow crack growth under constant load is not expected.

  18. Lichens and mosses as monitors of industrial activity associated with uranium mining in Northern Ontario, Canada. Pt. 1. Field procedures, chemical analysis and inter-species comparisons

    Energy Technology Data Exchange (ETDEWEB)

    Boileau, L J.R.; Beckett, P J; Lavoie, P; Richardson, D H.S. [Laurentian Univ., Sudbury, Ontario (Canada). Dept. of Biology; Laurentian Univ., Sudbury, Ontario (Canada). Dept. of Chemistry); Nieboer, E [McMaster Univ., Hamilton, Ontario (Canada). Dept. of Biochemistry

    1982-07-01

    A modified X-ray fluorescence spectrometry technique allowed the detection of uranium in cryptograms with a detection limit of 0.5 to 1 ..mu..g U g/sup -1/ of plant material. The levels of five elements (Ti, Fe, Ni, Pb and U) in 109 lichen and 98 moss samples collected around two uranium mining communities in northeastern Ontario, Canada, are reported. Similar metal accumulation tendencies were observed for the pair of lichens, Cladonia rangiferina and C. mitis, and for the moss pair, Pleurozium schreberi and Dicranum spp. This interchangeability, combined with favourable availability, made the above species the most useful biological monitors. Inter-elemental content comparisons employing Pearson's linear correlation statistic indicated a strong positive association among the pairs iron/titanium, and uranium/lead. Somewhat weaker positive correlations were observed in the individual comparisons of uranium levels with iron, or titanium, or nickel content. The associations between elements in mosses and lichens were in excellent agreement with the grouping based on the composition of the local uranium ores and tailings.

  19. Content of heavy metals in the sediments of the rivers and adjacent gullies to Relleno de Rio Azul, Rio Azul, San Jose, Costa Rica

    International Nuclear Information System (INIS)

    Mora Amador, R.A.

    2003-01-01

    In Costa Rica it is not had studies that have documented heavy the fluvial sediment metal concentrations, caused by point sources of polluting agents, as they are the sites of I deposit of been accustomed to remainders. The potential source of heavy metal concentrations in the study area, it is an active sanitary filling, known like Sanitary Landing Azul River, which is located to the Southeastern of the city of San Jose, in the District of Azul River, Corner of the Union. The site where this made up of a sequence of materials of volcanic origin is located to the filling of Azul River, which could be affected by local fault, this fact would mean a serious threat of contamination of underground waters of the region, then the geological faults constitute very permeable means, able to put in contact the polluting agents of the water-bearing filling with some. The mass of metals deposited in the site, from 1978 to date, metric ton has calculated between 70000 to 100000, which turns it an environmental preoccupation of first order. The results of x-rays fluorescence show the presence of elements like vanadium, chromium, manganese, it receives, zinc rubidium, strontium, potassium, calcium, iron, titanium and yttrium, which show a tendency to present/display high concentrations but in the fine fraction (d [es

  20. Geochemistry of vanadium in an epigenetic, sandstone-hosted vanadium- uranium deposit, Henry Basin, Utah

    Science.gov (United States)

    Wanty, R.B.; Goldhaber, M.B.; Northrop, H.R.

    1990-01-01

    The epigenetic Tony M vanadium-uranium orebody in south-central Utah is hosted in fluvial sandstones of the Morrison Formation (Upper Jurassic). Measurements of the relative amounts of V+3 and V +4 in ore minerals show that V+3 is more abundant. Thermodynamic calculations show that vanadium was more likely transported to the site of mineralization as V+4. The ore formed as V+4 was reduced by hydrogen sulfide, followed by hydrolysis and precipitation of V+3 in oxide minerals or chlorite. Uranium was transported as uranyl ion (U+6), or some complex thereof, and reduced by hydrogen sulfide, forming coffinite. Detrital organic matter in the rocks served as the carbon source for sulfate-reducing bacteria. Vanadium most likely was derived from the dissolution of iron-titanium oxides. Uranium probably was derived from the overlying Brushy Basin Member of the Morrison Formation. Previous studies have shown that the ore formed at the density-stratified interface between a basinal brine and dilute meteoric water. The mineralization processes described above occurred within the mixing zone between these two fluids. -from Authors

  1. Microwave assisted scalable synthesis of titanium ferrite nanomaterials

    Science.gov (United States)

    Shukla, Abhishek; Bhardwaj, Abhishek K.; Singh, S. C.; Uttam, K. N.; Gautam, Nisha; Himanshu, A. K.; Shah, Jyoti; Kotnala, R. K.; Gopal, R.

    2018-04-01

    Titanium ferrite magnetic nanomaterials are synthesized by one-step, one pot, and scalable method assisted by microwave radiation. Effects of titanium content and microwave exposure time on size, shape, morphology, yield, bonding nature, crystalline structure, and magnetic properties of titanium ferrite nanomaterials are studied. As-synthesized nanomaterials are characterized by X-ray diffraction (XRD), ultraviolet-visible absorption spectroscopy (UV-Vis), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), Raman spectroscopy, transmission electron microscopy (TEM), and vibrating sample magnetometer measurements. XRD measurements depict the presence of two phases of titanium ferrite into the same sample, where crystallite size increases from ˜33 nm to 37 nm with the increase in titanium concentration. UV-Vis measurement showed broad spectrum in the spectral range of 250-600 nm which reveals that its characteristic peaks lie between ultraviolet and visible region; ATR-FTIR and Raman measurements predict iron-titanium oxide structures that are consistent with XRD results. The micrographs of TEM and selected area electron diffraction patterns show formation of hexagonal shaped particles with a high degree of crystallinity and presence of multi-phase. Energy dispersive spectroscopy measurements confirm that Ti:Fe compositional mass ratio can be controlled by tuning synthesis conditions. Increase of Ti defects into titanium ferrite lattice, either by increasing titanium precursor or by increasing exposure time, enhances its magnetic properties.

  2. COERCIVITY AND VECTOR MAGNETIZATION ANALYSIS OF OBSIDIAN SAMPLES FROM THE TRANS-MEXICAN VOLCANIC BELT (Coercitividad y análisis de magnetización vectorial de muestras de obsidianas de la faja volcánica transmexicana

    Directory of Open Access Journals (Sweden)

    Jaime Urrutia-Fucugauchi

    2017-09-01

    Full Text Available This note presents initial results of a paleomagnetic study of obsidian from twenty localities in the eastern, central and western sectors of the Trans-Mexican volcanic belt in central Mexico. We focus on the coercivity and vector composition of the remanent magnetization, which are critical for paleodirectional and paleointensity studies. Alternating field demagnetization shows that obsidians carry single and two-component magnetizations residing in low- and high-coercivity magnetic minerals, with discrete and overlapping coercivity spectra. Magnetic minerals are likely iron-titanium oxides with fine-grain sizes characterized by pseudo-single domain states. ESPAÑOL: Se presentan los resultados preliminares del estudio de obsidianas de veinte localidades en los sectores este, central y oeste de la faja volcánica transmexicana. Los análisis se concentran en la coercitividad y la composición vectorial de la magnetización remanente, que son propiedades claves para evaluar los registros de direcciones e intensidades. La desmagnetización por campos alternos revela la presencia de magnetizaciones de una y dos componentes, que residen en minerales con baja y alta coercitividad con espectros que traslapan y discretos. Los minerales magnéticos son óxidos de hierro-titanio con grano fino y estados de dominio seudosencillo.

  3. Uranium occurrence in major rock types by fission-track mapping

    International Nuclear Information System (INIS)

    Ledger, E.G.; Bomber, B.J.; Schaftenaar, W.E.; Tieh, T.T.

    1984-01-01

    Microscopic occurrence of uranium has been determined in about 50 igneous rocks from various location, and in a genetically unrelated sandstone from south Texas. Precambrian granites from the Llano uplift of central Texas contain from a few ppm uranium (considered normal) to over 100 ppm on a whole-rock basis. In granite, uranium is concentrated in: (1) accessory minerals including zircon, biotite, allanite, Fe-Ti oxides, and altered sphene, (2) along grain boundaries and in microfractures by precipitation from deuteric fluids, and (3) as point sources (small inclusions) in quartz and feldspars. Tertiary volcanic rocks from the Davis Mountains of west Texas include diverse rock types from basalt to rhyolite. Average uranium contents increase from 1 ppm in basalts to 7 ppm in rhyolites. Concentration occurs: (1) in iron-titanium-oxides, zircon, and rutile, (2) in the fine-grained groundmass as uniform and point-source concentrations, and (3) as late uranium in cavities associated with banded, silica-rich material. Uranium in ore-grade sandstone is concentrated to more than 3%. Specific occurrences include (1) leucoxene and/or anatase, (2) opaline and calcite cements, (3) mud clasts and altered volcanic rock fragments, and (4) in a few samples, as silt-size uranium- and molybdenum-rich spheres. Uranium content is quite low in pyrite, marcasite, and zeolites

  4. Metal nanoparticles in DBS card materials modification

    Science.gov (United States)

    Metelkin, A.; Frolov, G.; Kuznetsov, D.; Kolesnikov, E.; Chuprunov, K.; Kondakov, S.; Osipov, A.; Samsonova, J.

    2015-11-01

    In the recent years the method of collecting and storing Dried Blood Spots (DBS) on special cellulose membrane (paper) has gained wide popularity. But possible damage of biosamples caused by microorganisms in case of their incomplete drying is a disadvantage of the method. It can be overcome by treating sample-collection membranes with colloidal solutions of metal nanoparticles, having antibacterial effect. The team studied antibacterial properties of nonwoven material samples with various coatings (alcohol sols of copper, aluminium, iron, titanium, silver and vanadium nanoparticles). Colloidal solutions of nanoparticles were obtained by means of electroerosion method with further low-temperature plasma condensation. Antibacterial activity of fiberglass and cellulose membrane samples with nanoparticle coatings was studied using B. cereus and plaque bacteria cultures. It was revealed that nanostructured coatings can suppress bacterial activity; in addition they can diffuse from the membrane surface into medium which leads to widening the areas of inhibiting testing cultures’ growth. Thus, membrane materials treatment with alcohol-sols of metal nanoparticles can be seen as promising for conferring antibacterial properties to DBS carriers.

  5. Metal nanoparticles in DBS card materials modification

    International Nuclear Information System (INIS)

    Metelkin, A; Frolov, G; Kuznetsov, D; Kolesnikov, E; Chuprunov, K; Kondakov, S; Osipov, A; Samsonova, J

    2015-01-01

    In the recent years the method of collecting and storing Dried Blood Spots (DBS) on special cellulose membrane (paper) has gained wide popularity. But possible damage of biosamples caused by microorganisms in case of their incomplete drying is a disadvantage of the method. It can be overcome by treating sample-collection membranes with colloidal solutions of metal nanoparticles, having antibacterial effect. The team studied antibacterial properties of nonwoven material samples with various coatings (alcohol sols of copper, aluminium, iron, titanium, silver and vanadium nanoparticles). Colloidal solutions of nanoparticles were obtained by means of electroerosion method with further low-temperature plasma condensation. Antibacterial activity of fiberglass and cellulose membrane samples with nanoparticle coatings was studied using B. cereus and plaque bacteria cultures. It was revealed that nanostructured coatings can suppress bacterial activity; in addition they can diffuse from the membrane surface into medium which leads to widening the areas of inhibiting testing cultures’ growth. Thus, membrane materials treatment with alcohol-sols of metal nanoparticles can be seen as promising for conferring antibacterial properties to DBS carriers. (paper)

  6. Niveles séricos de minerales en hembras de cría bovina en un establecimiento de la región de selva y pastizal pedemontano del norte de Salta

    Directory of Open Access Journals (Sweden)

    MICHELOUD JF

    2017-12-01

    Full Text Available Las deficiencias minerales son un problema de gran impacto productivo a nivel mundial. En el Noroeste argentino (NOA la cría extensiva es una de las actividades económicas más importantes y está en franco crecimiento. En el NOA, los estudios sobre enfermedades carenciales son escasos y parciales. El presente trabajo tiene por objeto describir variaciones estacionales de los niveles séricos de calcio, fósforo, magnesio, cobre y zinc en vacas de cría y terneras de recría. En un establecimiento ganadero se seleccionaron 20 vacas y 20 terneras que fueron mantenidos en condiciones de pastoreo y sin suplementación externa. Se efectuaron muestreos de sangre a intervalos de 3 meses durante un año. Se determinaron niveles séricos de calcio, magnesio, cobre y zinc por espectrofotometría de absorción atómica y de fósforo por espectrofotometría uv-visible. Los resultados indican la existencia de hipocupremia moderada a leve en las terneras (48,6±11μg/dL durante todos los períodos muestreados. Las vacas presentaron valores promedio normales (66±3,5 μg/dL pero cercanos al límite inferior durante algunos muestreos. Se observaron niveles subnormales de fósforo durante el verano (diciembre y marzo en ambas categorías. Este trabajo sugiere que el cobre y el fósforo pueden comportarse como factores limitantes en las condiciones evaluadas. SUMMARY. Serum levels of minerals in beef heifers and cows in the cloudforest of Salta, Argentina. Mineral deficiencies are a problem of great productive impact worldwide. In the Argentine Northwest (NOA extensive breeding is one of the most important economic activities and it is in frank growth. In the NOA, studies on deficiency diseases are scarce and partial. The present work aims to describe seasonal variations of serum levels of calcium, phosphorus, magnesium, copper and zinc in beef cows and rearing calves. In a farm, 20 cows and 20 weaned heifer calves were selected, which were maintained under

  7. Oxygen Reduction Kinetics of La2-xSrxNiO 4+delta Electrodes for Solid Oxide Fuel Cells

    Science.gov (United States)

    Guan, Bo

    bulk diffusion resistance is confirmed by parallel experiment and EIS analysis, resulting in exclusive focus on the surface process. It is ambiguously proved that Sr doping impairs the surface kinetics of lanthanum nickelates. The interstitial oxygen is suggested to be the key role when the oxygen incorporation is rat determining. For the first time, a physical model is proposed to illustrate how those interstitial species work to regulate the exchange rate of the incorporation reaction. To achieve better surface exchange ability on LNO, Mn is chosen as the doping element substituted for Ni with different levels to improve the surface kinetics because Mn is much active both for adsorption process and for incorporation process due to the high state of Mn leading to the high amount of the interstitial oxygen. Mn is found to substantially promote the surface kinetics, showing highest surface exchange coefficient (k) of 1.57x10-6cm/s at 700°C on composition of La1.8Sr0.2Ni0.9 Mn0.1O4+delta. Such value is ˜80% larger than that of the undoped sample, and is one of the highest k among the currently available R-P phase intermediate temperature (IT) cathode.

  8. Nanomolar determination of 4-nitrophenol based on a poly(methylene blue)-modified glassy carbon electrode.

    Science.gov (United States)

    Giribabu, Krishnamoorthy; Suresh, Ranganathan; Manigandan, Ramadoss; Munusamy, Settu; Kumar, Sivakumar Praveen; Muthamizh, Selvamani; Narayanan, Vengidusamy

    2013-10-07

    A poly(methylene blue)-modified glassy carbon electrode (PMB/GCE) was fabricated by electropolymerisation of methylene blue on a GCE and further utilized to investigate the electrochemical determination of 4-nitrophenol (4-NP) by cyclic voltammetry (CV), differential pulse voltammetry and chronocoulometry. The morphology of the PMB on GCE was examined using a scanning electron microscope (SEM). An oxidation peak of 4-NP at the PMB modified electrode was observed at 0.28 V, and in the case of bare GCE, no oxidation peak was observed, which indicates that PMB/GCE exhibits a remarkable effect on the electrochemical determination of 4-NP. Due to this remarkable effect of PMB/GCE, a sensitive and simple electrochemical method was proposed for the determination of 4-NP. The effect of the scan rate and pH was investigated to determine the optimum conditions at which the PMB/GCE exhibits a higher sensitivity with a lower detection limit. Moreover, kinetic parameters such as the electron transfer number, proton transfer number and standard heterogeneous rate constant were calculated. Under optimum conditions, the oxidation current of 4-NP is proportional to its concentration in the range of 15-250 nM with a correlation coefficient of 0.9963. The detection limit was found to be 90 nM (S/N = 3). The proposed method based on PMB/GCE is simple, easy and cost effective. To further confirm its possible application, the proposed method was successfully used for the determination of 4-NP in real water samples with recoveries ranging from 97% to 101.6%. The interference due to sodium, potassium, calcium, magnesium, copper, zinc, iron, sulphate, carbonate, chloride, nitrate and phosphate was found to be almost negligible.

  9. Population dietary habits and physical activity modification with age.

    Science.gov (United States)

    Schröder, H; Marrugat, J; Covas, M; Elosua, R; Pena, A; Weinbrenner, T; Fito, M; Vidal, M A; Masia, R

    2004-02-01

    The aim of the present study was to analyse the relation between age and both dietary habits and leisure-time physical activity, and to determine nutrient inadequacy of aged groups in our population. Cross-sectional study. A random sample of the 25-74-y-old population of Gerona, Spain. A total of 838 men and 910 women were selected from among the general population according to the 1991 census. Analysis of dietary habits, including amount and type of alcohol consumption, and detailed evaluation of leisure-time physical activity. Nutrient densities of carbohydrates, vitamin B(1), vitamin B(12), vitamin C, vitamin E, folate, potassium, iron, magnesium, copper, and dietary fiber increased significantly (Phabits, characterized through a composite dietary score, with age after adjusting for several confounders both in men and women (P<0.001). This score was composed of folate, vitamin C, vitamin E, beta-carotene, dietary fibre, cholesterol, saturated fatty acids, and sodium. In all, 29 and 10% of male and female subjects aged 65-74 y, respectively, reported inadequate intakes of six or more of 16 nutrients. Total leisure-time physical activity increased with age in men (P<0.002), and was not different among female age groups. Dietary behaviours and levels of physical activity spent during leisure time indicate a healthy lifestyle of the aged men and women in the present population. Nutrient inadequacy observed in some aged men and women, however, deserves particular intervention of health-care programmes for this growing part of our society.

  10. Subclinical mastitis (SCM) and proinflammatory cytokines are associated with mineral and trace element concentrations in human breast milk.

    Science.gov (United States)

    Li, Chen; Solomons, Noel W; Scott, Marilyn E; Koski, Kristine G

    2018-03-01

    The possibility that either subclinical mastitis (SCM), an inflammatory condition of the breast, or elevations in breast milk proinflammatory cytokines alter breast milk mineral and trace element composition in humans has not been investigated. In this cross-sectional study, breast milk samples (n=108) were collected from Guatemalan Mam-Mayan mothers at one of three stages of lactation (transitional, early and established), and categorized as SCM (Na:K >0.6) or non-SCM (Na:K ≤0.6). Milk concentrations of 12 minerals (calcium, copper, iron, magnesium, manganese, phosphorus, potassium, rubidium, selenium, sodium, strontium, and zinc) and 4 proinflammatory cytokines (IL-1β, IL-6, IL-8, TNF-α) were measured by inductively coupled plasma mass spectrometry (ICP-MS), Lachat analyzer or Luminex multiplex bead cytokine assay. SCM was more prevalent during transitional (30%) than early (15.6%) and established (8.9%) lactation. Analysis of variance revealed that breast milk minerals differed by stage of lactation and SCM status. Breast milk minerals with the exception of magnesium were lower in established lactation, whereas SCM was associated with higher selenium and lower phosphorus. Regression models that controlled for lactation stage also confirmed that SCM was associated with lower milk phosphorus and higher milk selenium concentrations. Furthermore, cytokine concentrations were independently associated with several mineral concentrations: IL-1β with higher phosphorus and iron, IL-6 with higher calcium, magnesium, copper and manganese, IL-8 with higher calcium and zinc, and TNF-α with lower iron and manganese. We conclude that milk mineral and trace element concentrations are affected not only by the presence of SCM but also by proinflammatory cytokines in breast milk. Copyright © 2017 Elsevier GmbH. All rights reserved.

  11. Preparation of thermoluminescent dosimeters of LiF: Mg, Cu, P + Ptfe for environmental radiological monitoring and radiodiagnosis

    International Nuclear Information System (INIS)

    Ramirez L, A.

    1996-01-01

    The necessity of finding a thermoluminescent material for measuring gamma and X radiation in applications like environmental monitoring, personnel dosimetry and biomedical sciences (radiotherapy and radiodiagnosis), but with special characteristics such as low umbral detection, independence of the energy of radiation and equivalency with the tissue. This made us think in lithium fluoride activated with magnesium, copper and phosphorous (LiF: Mg, Cu, P). In this thesis I developed this material chips like shape embedded in polytetrafluoroethylene (LiF: Mg, Cu, P+Ptfe). The chapter 1 and 2 talk about the atom is conformed and the interaction of the radiation with the matter. The requirements of Tl material, types of dosimetry system, biological effects and units of measurements are discussed in chapter 3 as well as the recommended limits of the International Commission on Radiological Protection ICRP. Chapter 4 shows aspects of the thermoluminescence phenomenon and describes, at the same time, the determination of the most important thermoluminescent parameters (kinetic order, energy or trap depth and the frequency factor). Chapter 5 describes the major characteristics and properties of Tl materials and its requirements for dosimetric use. Chapter 6 deals with the preparations of LiF: Mg, Cu, P+Ptfe chips and some tests for improving its sensitivity, describes the dosimetric tests and requirements proposed by American National Standard Institute ANSI-N545 Like: umbral of detection, homogeneity, fading, repeatability, linearity, effects of UV and fluorescent light etc. Finally in chapter 7 I do a report about analysis of results, conclusions and some recommendations. (Author)

  12. Preparation of thermoluminescent dosimeters of LiF: Mg, Cu, P + Ptfe for environmental radiological monitoring and radiodiagnosis; Preparacion de dosimetros termoluminiscentes de LiF: Mg, Cu, P + PTFE para monitoreo radiologico ambiental y radiodiagnostico

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez L, A

    1997-12-31

    The necessity of finding a thermoluminescent material for measuring gamma and X radiation in applications like environmental monitoring, personnel dosimetry and biomedical sciences (radiotherapy and radiodiagnosis), but with special characteristics such as low umbral detection, independence of the energy of radiation and equivalency with the tissue. This made us think in lithium fluoride activated with magnesium, copper and phosphorous (LiF: Mg, Cu, P). In this thesis I developed this material chips like shape embedded in polytetrafluoroethylene (LiF: Mg, Cu, P+Ptfe). The chapter 1 and 2 talk about the atom is conformed and the interaction of the radiation with the matter. The requirements of Tl material, types of dosimetry system, biological effects and units of measurements are discussed in chapter 3 as well as the recommended limits of the International Commission on Radiological Protection ICRP. Chapter 4 shows aspects of the thermoluminescence phenomenon and describes, at the same time, the determination of the most important thermoluminescent parameters (kinetic order, energy or trap depth and the frequency factor). Chapter 5 describes the major characteristics and properties of Tl materials and its requirements for dosimetric use. Chapter 6 deals with the preparations of LiF: Mg, Cu, P+Ptfe chips and some tests for improving its sensitivity, describes the dosimetric tests and requirements proposed by American National Standard Institute ANSI-N545 Like: umbral of detection, homogeneity, fading, repeatability, linearity, effects of UV and fluorescent light etc. Finally in chapter 7 I do a report about analysis of results, conclusions and some recommendations. (Author).

  13. Optimization of the preparation method of LiF: Mg, Cu, P and study of its thermoluminescent properties to be used in ionizing radiation dosimetry

    International Nuclear Information System (INIS)

    Gonzalez M, P.R.

    1995-01-01

    In this thesis the preparation and dosimetric properties of the thermoluminescence phosphor LiF doped with magnesium, copper and phosphorus are studied. In chapter 1 luminescence phenomenon in solids is described, emphasizing the importance of thermally stimulated luminescence known as thermoluminescence (TL) as well as its application in ionizing radiation dosimetry. The models used to determine the kinetics parameters in the TL phenomenon are described in chapter 2. In chapter 3, the dosimetric characteristics of a TL materials and its requirements for dosimetry are analyzed. The preparation method of LiF: Mg, Cu, P is presented in chapter 4 studying its general characteristics for dosimetry. The concentrations of dopants, glow curve structure, TL response to gamma, beta and alpha exposures are studied along with those of LiF: Mg, Cu, P prepared for other authors and with those of LiF: Mg, Ti (TLD-100). The kinetic parameters of the phosphor were determined by the deconvolution method. Pellets of this new phosphor powder were made by pressing it at room temperature and sintering in inert atmosphere at 700 Centigrade degrees. Dosimetric characteristics of these pellets were also studied. Chapter 5 presents the results and conclusions of this study. The new dosimeter exhibited three peaks in its glow curve at 140, 180 and 220 Centigrade degrees respectively. Its TL response to gamma radiation was linear from 43.5 μ Gy to 100 Gy. This dosimeter is reusable and stable without significant loss of sensitivity. Its sensitivity was about 30 times higher than that of TLD-100. Fading of this dosimeter was negligible at room temperature as well as at body temperature (37 Centigrade degrees), and 65% at 60 Centigrade degrees. In conclusion, this dosimeter meets all the requirements of the ANSI standard. These and other characteristics render this dosimeter useful in diverse applications of radiation dosimetry. (Author)

  14. From nGy to MGy - new TL dosimetry of complex radiation at high-energy accelerators and thermonuclear fusion facilities

    International Nuclear Information System (INIS)

    Obryk, B.; Bilski, P.; Budzanowski, M.; Olko, P.

    2011-01-01

    One of the well known advantages of thermoluminescence (TL) detectors made of lithium fluoride doped with magnesium, copper and phosphorus (LiF:Mg,Cu,P) is their very high sensitivity to ionizing radiation. LiF:Mg,Cu,P detectors enable measurements of radiation doses from tens of nano grays up to a few kilo grays, when the total saturation of the signal of the so-called main dosimetric peak (at about 220 C. degrees) occurs. In 2006 for the first time we observed unprecedented high-temperature emission of LiF detectors heated to temperatures up to 600 C. degrees, after exposures to radiation doses ranging from 1 kGy to 1 MGy. For quantification of the glow curve shape changes of LiF:Mg,Cu,P detectors in this range of doses and determination of the absorbed dose, the high temperature coefficient (UHTR) was defined. This newly established dosimetric method was tested in a range of radiation qualities, such as gamma radiation, electron and proton beams, thermal neutron fields and in high-energy mixed fields around the SPS and PS accelerators at CERN. A number of dosimetric sets with LiF:Mg,Cu,P detectors are currently installed around the LHC at CERN. The new method for ultra-high dose range monitoring with a single LiF:Mg,Cu,P detector, which is capable of covering at least twelve orders of magnitude of doses, can be used for dosimetry at high energy accelerators and has great potential for accident dosimetry in particular. (authors)

  15. Radio environmental study and chemical characterization of golden water in Barker caves

    International Nuclear Information System (INIS)

    Kundt, Miriam S.; Cifarelli, Fernanda; Furnari, Juan C.; Cabanilla, Edgardo D.; Eppis, Maria R.

    2008-01-01

    Full text: It is possible to find in the northern mountains of Tandilia, caves of a natural or anthropic origin. These caves are often visited by tourists, explorers and scientists. An exclusive feature up to now, at least in the international literature, is the deposits of 'golden water'. In our country, these waters were described for the first time in 1897, as waters with fluorescence that might be caused by algae. Due to the fact that some inhabitants suspected that the water could contain uranium, a study was carried out at the lab of physical and chemical control of the CNEA by means of total reflection X-ray fluorescence and it determined a complete absence of uranium, although it informed on the presence of potassium, calcium, iron, titanium, manganese, zinc and strontium as majority elements, being the presence of titanium rather unusual in the water. The objective of the present paper is to study the composition of the chemical elements that constitute this kind of water and the determination of the levels of natural radionuclides present in some caves in Tandilia, especially radon gas. To that end, new samples of water have been taken and a new study of X-ray fluorescence and X-ray diffraction is being carried out that will lead to the confirmation of titanium and its quantification, as well as the chemical composition of the water. On the other hand, the levels of radon gas and other radionuclides are assessed by means of a liquid scintillation counting. The results of these studies will allow to determine if the tour guides of the caves should be protected from radiation and get to know the chemical composition of the golden water in order to understand its origin and its possible biotechnological implications. (author)

  16. Clay mineralogy of selected borehole sediments from the Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore, California

    International Nuclear Information System (INIS)

    Smith, D.K.; Peifer, D.W.; Rood, C.K.

    1992-04-01

    Smectite, 90 to 100% interstratified illite-smectite, chlorate, and kaolinite are identified in boreholes drilled in fluvial and alluvial fan deposits of the Plio-Pleistocene Livermore Formation in the vicinity of Lawrence Livermore National Laboratory (LLNL) and Sandia National Laboratories (SNL), Livermore. X-ray diffraction, scanning electron microscopy, and electron microprobe studies indicate the clays persist through 150 ft of gravels, sands, silts, and mudstones of the vadose zone to total drilling depths of 200 ft in the saturated zone. Scanning electron microscopy indicates that true clays (layer silicate only) comprise between 2 and 15 modal percent of the Livermore Formation. Authigenic and detrital smectite, 90% interlayered illite-smectite, and chlorate persist throughout the stratigraphic section; kaolinite occurs only in the upper 100 ft of the section and is absent below. Smectite comprises between 60 to 90% of the true (layer silicate only) clay fraction. Illite and kaolinite±chlorite abundances fluctuate between 10 to 30% and 10 to 20% of this fraction, respectively. Authigenic smectite, illite, and chlorate crystallize together with detrital phases; the authigenic component increases with depth. The relative percentages of clay minerals define unique mineralogical intervals, which can be correlated between boreholes. Pervasive microfractures and interconnected porosity are inherent in the finer sediments; the microfractures typically are 1 mm or less in width and are variably spaced. Voids and microfractures are conspicuously lined by clays. Porosity for the argillaceous sediments ranges between 23 and 40%; Brunauer, Emmett, and Teller (BET) specific surface area decreases variably from 40 m 2 /g near the surface to 15 m 2 /g at the 115-ft depth. Within the pelitic matrix, iron, iron-titanium, chromium, and manganese oxides are pervasive

  17. Study of treatment of a thorium and rare earths residue by extraction chromatography

    International Nuclear Information System (INIS)

    Zini, Josiane; Abrao, Alcidio; Carvalho, Fatima Maria Sequeira de; Freitas, Antonio Alves de; Scapin, Marcos Antonio

    2005-01-01

    In the 70's was established at IPEN the project of a thorium compounds purification pilot plant that had the goal of fulfilling the nuclear technology purity standards. The used method was the purification by extraction with solvents in pulsed columns. The thorium remaining in the organic phase was back extracted as thorium nitrate with a high degree of purity. Impurities, thorium non-extracted and practically all rare earths in aqueous phase of this chemical process were precipitated as hydroxide, generating a product containing thorium and rare earths, that was denominated RETOTER (residue of thorium and rare earths). This residue was accumulated and today there are 25 (twenty-five) metric tons of this by product stored in the safeguard storage shed at IPEN that must to be treated due to the radiation of the thorium and mainly his daughters. The average composition of this residue is, 68% in thorium oxide (ThO 2 ), 5% in rare earths oxides (R 2 O 3 ), 0,3% in uranium oxide (U 3 O 8 ) and common impurities such as phosphorus, iron, titanium, lead and sodium. In this work a new method is presented for separation and purification of thorium from this residue, obtaining a concentrate with high degree of purity for nuclear and non-nuclear use. This process will contribute to establish a decreasing of residue volumes, to have a mind to the minimization of environmental impacts, the reduction of worker's exposition and reduction of the storage costs. In this process the separation and purification of uranium and thorium is done by chromatography extraction, being used polymeric resins, that are previously functionalized with organic solvent (extractor agent). The effluent of this process is a concentrate of rare earths that can be reprocessed in a subsequent fractionating for to obtaining the individual fractions. (author)

  18. Petrogenesis of Igneous-Textured Clasts in Martian Meteorite Northwest Africa 7034

    Science.gov (United States)

    Santos, A. R.; Agee, C. B.; Humayun, M.; McCubbin, F. M.; Shearer, C. K.

    2016-01-01

    The martian meteorite Northwest Africa 7034 (and pairings) is a breccia that samples a variety of materials from the martian crust. Several previous studies have identified multiple types of igneous-textured clasts within the breccia [1-3], and these clasts have the potential to provide insight into the igneous evolution of Mars. One challenge presented by studying these small rock fragments is the lack of field context for this breccia (i.e., where on Mars it formed), so we do not know how many sources these small rock fragments are derived from or the exact formation his-tory of these sources (i.e., are the sources mantle de-rived melt or melts contaminated by a meteorite impactor on Mars). Our goal in this study is to examine specific igneous-textured clast groups to determine if they are petrogenetically related (i.e., from the same igneous source) and determine more information about their formation history, then use them to derive new insights about the igneous history of Mars. We will focus on the basalt clasts, FTP clasts (named due to their high concentration of iron, titanium, and phosphorous), and mineral fragments described by [1] (Fig. 1). We will examine these materials for evidence of impactor contamination (as proposed for some materials by [2]) or mantle melt derivation. We will also test the petrogenetic models proposed in [1], which are igneous processes that could have occurred regardless of where the melt parental to the clasts was formed. These models include 1) derivation of the FTP clasts from a basalt clast melt through silicate liquid immiscibility (SLI), 2) derivation of the FTP clasts from a basalt clast melt through fractional crystallization, and 3) a lack of petrogenetic relationship between these clast groups. The relationship between the clast groups and the mineral fragments will also be explored.

  19. Ordered Fe(II)Ti(IV)O3 Mixed Monolayer Oxide on Rutile TiO2(011).

    Science.gov (United States)

    Halpegamage, Sandamali; Ding, Pan; Gong, Xue-Qing; Batzill, Matthias

    2015-08-25

    Oxide monolayers supported or intermixed with an oxide support are potential nanocatalysts whose properties are determined by the interplay with the support. For fundamental studies of monolayer oxides on metal oxide supports, well-defined systems are needed, but so far, the synthesis of monolayer oxides with long-range order on single-crystal oxide surfaces is rare. Here, we show by a combination of scanning tunneling microscopy, photoemission spectroscopy, and density functional theory (DFT)-based computational analysis that the rutile TiO2(011) surface supports the formation of an ordered mixed FeTiO3 monolayer. Deposition of iron in a slightly oxidizing atmosphere (10(-8) Torr O2) and annealing to 300 °C results in a well-ordered surface structure with Fe in a 2+ charge state and Ti in a 4+ charge states. Low-energy ion scattering suggests that the cation surface composition is close to half Fe and half Ti. This surface is stable in ultrahigh vacuum to annealing temperatures of 300 °C before the iron is reduced. DFT simulations confirm that a surface structure with coverage of 50% FeO units is stable and forms an ordered structure. Although distinct from known bulk phases of the iron-titanium oxide systems, the FeTiO3 monolayer exhibits some resemblance to the ilmenite structure, which may suggest that a variety of different mixed oxide phases (of systems that exist in a bulk ilmenite phase) may be synthesized in this way on the rutile TiO2(011) substrate.

  20. Preparation of hard magnetic materials based on nitrogenated rare-earth iron alloys; Preparacao de materiais magneticamente duros a base de ligas de terra rara - ferro nitrogenadas

    Energy Technology Data Exchange (ETDEWEB)

    Guilherme, Eneida da Graca

    1999-07-01

    Nd Fe{sub 11}Ti, Nd Fe{sub 10.5} Mo{sub 1.5} and Nd Fe{sub 10.75} Mo{sub 1.25} alloys were synthesized by reduction-diffusion calciothermic process (RDC) from neodymium chloride (NdCl{sub 3}), iron, titanium, molybdenum and reduction agent (metallic calcium). The effect of process variables, like temperature, time, excess amount of NdCl{sub 3}, heating rate, and composition variation of the Nd Fe{sub 12-x}Mo{sub x} (1 {>=} x {>=} 2). Mother alloys in which 1:12 phase is major were nitrogenated by gas-solid reaction with N{sub 2} and by chemical reaction with sodium zide (Na N{sub 3}). In addition, the influence of reducing particle size of the powdered mother alloys in the nitrogenation step with Na N{sub 3} were studied. As prepared and interstitially modified Nd Fe{sub 11} Ti, Nd Fe{sub 10.5} Mo{sub 1.5} and Nd Fe{sub 10.75} Mo{sub 1.25} alloys with nitrogen , were characterized by X-ray diffraction, Moessbauer spectroscopy, thermomagnetic, SEM and EDS. Nitrogenation by gas-solid reaction with N{sub 2} is found to be not promising, since resulted Curie temperatures (Tc) were lower than literature values. However, nitrogenation by chemical reaction with Na N{sub 3} was efficient with higher or same Tc than previous reported results. The average increases on Tc and volumetric expansion were 200 deg C and 4%, respectively. Milling of the mother alloys before nitrogenation at 330 deg C is preferred because reaction kinetics is enhanced. Nevertheless, at 450 deg C, a competition between the interstitially modified compound formation (alloy + N) and alloy dissociation has occurred, resulting in a Fe-{alpha} phase increase. (author)

  1. Diagenesis of amorphous organic matter as an essential aspect of genesis and alteration of tabular-type uranium-vanadium deposits, Colorado Plateau

    International Nuclear Information System (INIS)

    Spirakis, C.S.; Hansley, P.L.

    1987-01-01

    Organic matter was the key to the initial concentration of uranium and vanadium (during the sulfate reduction stage of early diagenesis) in all sandstone-hosted, tabular deposits in the Morrison Formation, Colorado Plateau. In deposits rich in amorphous organic matter, as are many in the Grants uranium region (GUR), diagenesis did not proceed beyond sulfate reduction. In contrast, in organic-poor, chlorite deposits of the Henry Mountains district, 13 C- and 18 O-enriched dolomites preserve evidence of a subsequent methanogenic stage. In these and similar organic-poor deposits in the Slick Rock district and in parts of the GUR, aluminosilicate dissolution (including a distinctive, organic-acid-induced etching of garnets) and growth of coarse-grained coffinite, albite, ankerite, and chlorite suggest diagenesis reached the organic acid stage. Temperature and thermal maturation indicators (vitrinite reflectance, type IIb chlorite, ordered illite/smectite, and fluid inclusion data) are consistent with temperatures of organic-acid stage diagenesis (∼ 100 0 C). The localization of these alterations in and around organic-poor, clay-rich ore; the similarities in type and sequence of these alterations to the normal alteration of organic-bearing sediments; the alteration of iron-titanium oxides (attributed to the action of soluble organic complexes) around both organic-rich and organic-poor deposits; and the gradation from organic-rich to organic-poor, chlorite-rich deposits (in GUR) suggest that (1) amorphous organic matter was involved in the genesis of all of these deposits and (2) differences among deposits may reflect varying degrees of diagenesis of the organic matter

  2. Research and development activities at INE concerning corrosion of final repository container materials; F and E-Arbeiten zur Korrosion von Endlager-Behaelterwerkstoffen im INE

    Energy Technology Data Exchange (ETDEWEB)

    Kienzler, Bernhard

    2017-10-01

    The present work provides a historical overview of the research and development activities carried out at the (Nuclear) Research Center Karlsruhe (today KIT) since the beginning of the 1980s on the corrosion of materials which might be suitable for construction of containers for highly radioactive wastes. The report relates almost exclusively to the work performed by Dr. Emmanuel Smailos, who elaborated the corrosion of various materials at the Institute for Nuclear Waste Disposal (INE). The requirements for the containers and materials, which were subject to changes in time, are presented. The changes were strongly influenced by the changed perception of the use of nuclear energy. The selection of the materials under investigations, the boundary conditions for the corrosion experiments and the analytical methods are described. Results of the corrosion of the materials such as finegrained steel, Hastelloy C4, nodular cast iron, titanium-palladium and copper or copper-nickel alloys in typical salt solutions are summarized. The findings of special investigations, e.g. corrosion under irradiation or the influence of sulfide on the corrosion rates are shown. For construction of disposal canisters, experiments were conducted to determine the contact corrosion, the influence of the hydrogen embrittlement of Ti-Pd and fine-grained steels on the corrosion behavior as well as the corrosion behavior of welding and the influence of different welding processes with the resulting heat-affected zones on the corrosion behavior. The work was contributed to several European research programs and was well recognized in the USA. Investigations on the corrosion of steels in non-saline solutions and corrosion under interim storage conditions as well as under the expected conditions of the Konrad repository for low-level radioactive wastes are also described. In addition, the experiments on ceramic materials are presented and the results of the corrosion of Al{sub 2}O{sub 3} and Zr

  3. Oxidation-reduction phenomena in tabular uranium-vanadium bearing sandstone from the Salt Wash deposits (Upper Jurassic) of the Cottonwood Wash district (Utah, USA)

    International Nuclear Information System (INIS)

    Meunier, J.D.

    1984-02-01

    A braided to meandering fluvial environment has been postulated for this area after a sedimentological study. The mineralization is spatially related with conifer derived organic matter and wood is preserved in these sediments because of the reducing environment of deposition. The degree of maturation of the organic matter has been estimated from chemical analyses. Results show the presence of variable diagenetic oxidation depending on the environment. The organic matter which was least affected by this oxidation have attained a thermal maturation characteristic of the end stage of diagenesis. The high grade ore is situated at the edges of or within the trunks of trees (which remained permeable during diagenesis) and at the boundaries of the carbonaceous beds. Geochemical study shows there to be good correlation between uranium and vanadium. Uranium occurs as pitchblende, coffinite or as impregnations in the vanadiferous clay cement. A detailed study of clays shows an association of chlorite and roscoelite which most probably contain V 3+ . Fluid inclusion study suggests burying temperatures of >= 100 0 C and shows the existance of brines before the mineralization. The following genetical model is proposed. Low Eh uraniferous solutions move through a reduced pyritised environment. The low degree of oxidation of the pyrites propagates the destabilization of the clastic iron-titanium oxides which release vanadium and the dissociation of uranylcarbonates. Then, the deposit of pitchblende, coffinite, montroseite and vanadiferous clays took place in association with a secondary pyrite. When the rocks were uplifted to the subsurface, uranium (IV) and vanadium (III) were remobilised in an oxidising environment to form a secondary mineralization essentially represented by tyuyamunite [fr

  4. Cesium release from ceramic waste form materials in simulated canister corrosion product containing solutions

    Energy Technology Data Exchange (ETDEWEB)

    Vittorio, Luca; Drabarek, Elizabeth; Chronis, Harriet; Griffith, Christopher S

    2004-07-01

    It has previously been demonstrated that immobilization of Cs{sup +} and/or Sr{sup 2+} sorbed on hexagonal tungsten oxide bronze (HTB) adsorbent materials can be achieved by heating the materials in air at temperatures in the range 500 - 1300 deg C. Highly crystalline powdered HTB materials formed by heating at 800 deg C show leach characteristics comparable to Cs-containing hot-pressed hollandites in the pH range from 0 to 12. As a very harsh leaching test, and also to model in a basic manner, leaching in the presence of canister corrosion products in oxidising environments, leaching of the bronzoid phases has been undertaken in Fe(NO{sub 3}){sub 3} solutions of increasing concentration. This is done in comparison with Cs -hollandite materials in order to compare the leaching characteristics of these two materials under such conditions. Both the Cs-loaded bronze and hollandite materials leach severely in Fe(NO{sub 3}){sub 3} losing virtually all of the immobilized Cs in a period of four days at 150 deg C. Total release of Cs and conversion of hollandite to titanium and iron titanium oxides begins to be observed at relatively low concentrations and is virtually complete after four days reaction in 0.5 mol/L Fe(NO{sub 3}){sub 3}. In the case of the bronze, all of the Cs is also extracted but the HTB structure is preserved. The reaction presumably involves an ion-exchange mechanism and iron oxide with a spinel structure is also observed at high Fe concentrations. (authors)

  5. Cesium release from ceramic waste form materials in simulated canister corrosion product containing solutions

    International Nuclear Information System (INIS)

    Vittorio, Luca; Drabarek, Elizabeth; Chronis, Harriet; Griffith, Christopher S.

    2004-01-01

    It has previously been demonstrated that immobilization of Cs + and/or Sr 2+ sorbed on hexagonal tungsten oxide bronze (HTB) adsorbent materials can be achieved by heating the materials in air at temperatures in the range 500 - 1300 deg C. Highly crystalline powdered HTB materials formed by heating at 800 deg C show leach characteristics comparable to Cs-containing hot-pressed hollandites in the pH range from 0 to 12. As a very harsh leaching test, and also to model in a basic manner, leaching in the presence of canister corrosion products in oxidising environments, leaching of the bronzoid phases has been undertaken in Fe(NO 3 ) 3 solutions of increasing concentration. This is done in comparison with Cs -hollandite materials in order to compare the leaching characteristics of these two materials under such conditions. Both the Cs-loaded bronze and hollandite materials leach severely in Fe(NO 3 ) 3 losing virtually all of the immobilized Cs in a period of four days at 150 deg C. Total release of Cs and conversion of hollandite to titanium and iron titanium oxides begins to be observed at relatively low concentrations and is virtually complete after four days reaction in 0.5 mol/L Fe(NO 3 ) 3 . In the case of the bronze, all of the Cs is also extracted but the HTB structure is preserved. The reaction presumably involves an ion-exchange mechanism and iron oxide with a spinel structure is also observed at high Fe concentrations. (authors)

  6. Uranium in waters and aquifer rocks at the Nevada Test Site, Nye County, Nevada

    International Nuclear Information System (INIS)

    Zielinski, R.A.; Rosholt, J.N.

    1978-01-01

    Previous chemical, geological, and hydrological information describing the physical and chemical environment of the Nevada Test Site has been combined with new radiochemical and isotope data for water and rock samples in order to explain the behavior of uranium during alteration of thick sequences of rhyolitic volcanic rocks and associated volcanielastic sediments. A model is proposed in which uranium mobility is controlled by two competing processes. Uranium is liberated from the volcanic rocks through dissolution of the glassy constituents and is carried in solution as a uranyl carbonate complex. Uranium is subsequently removed from solution by adsorption on secondary oxides of iron, titanium, and manganese, as observed in fission-track maps of aquifer rocks. The model explains the poor correlation of dissolved uranium with depth within tuffaceous sequences in which percolation of ground water is predominantly downward. Good positive correlation of dissolved uranium with dissolved Na, total dissolved solids, and total carbonate supports the glass dissolution model, while inverse correlation of dissolved uranium with 234 U/ 238 U ratios of water implies uranium is being absorbed by a relatively insoluble, surficial phase. Alpha radioactivity of Test Site water is primarily caused by high 234 U contents, and beta activity is highly correlated with dissolved K ( 40 K). Smallamounts of dissolved radium, 216 Pb, and 210 Po are present but no evidence was found for alpha activity sources related to nuclear testing (Pu, 235 U). A filtered but unacidified carbonate solution of uranium was found to be stable (+-10 percent of original U concentration) for years when stored in acid-washed polyethylene bottles. 5 tables, 2 figs

  7. Pre-eruptive conditions of dacitic magma erupted during the 21.7 ka Plinian event at Nevado de Toluca volcano, Central Mexico

    Science.gov (United States)

    Arce, J. L.; Gardner, J. E.; Macías, J. L.

    2013-01-01

    The Nevado de Toluca volcano in Central Mexico has been active over the last ca. 42 ka, during which tens of km3 of pyroclastic material were erupted and two important Plinian-type eruptions occurred at ca. 21.7 ka (Lower Toluca Pumice: LTP) and ca. 10.5 ka (Upper Toluca Pumice: UTP). Samples from both the LTP and UTP contain plagioclase, amphibole, iron-titanium oxides, and minor anhedral biotite, set in a vesicular, rhyolitic, glassy matrix. In addition, UTP dacites contain orthopyroxene. Analysis of melt inclusions in plagioclase phenocrysts yields H2O contents of 2-3.5 wt.% for LTP and 1.3-3.6 wt.% for UTP samples. Ilmenite-ulvospinel geothermometry yields an average temperature of ~ 868 °C for the LTP magma (hotter than the UTP magma, ~ 842 °C; Arce et al., 2006), whereas amphibole-plagioclase geothermometry yields a temperature of 825-859 °C for the LTP magma. Water-saturated experiments using LTP dacite suggest that: (i) amphibole is stable above 100 MPa and below 900 °C; (ii) plagioclase crystallizes below 250-100 MPa at temperatures of 850-900 °C; and (iii) pyroxene is stable only below pressures of 200-100 MPa and temperatures of 825-900 °C. Comparison of natural and experimental data suggests that the LTP dacitic magma was stored at 150-200 MPa (5.8-7.7 km below the volcano summit). No differences in pressure found between 21.7 ka and 10.5 ka suggest that these two magmas were stored at similar depths. Orthopyroxene produced in lower temperature LTP experiments is compositionally different to those found in UTP natural samples, suggesting that they originated in two different magma batches. Whole-rock chemistry, petrographic features, and mineral compositions suggest that magma mixing was responsible for the generation of the dacitic Plinian LTP eruption.

  8. Research and development activities at INE concerning corrosion of final repository container materials

    International Nuclear Information System (INIS)

    Kienzler, Bernhard

    2017-01-01

    The present work provides a historical overview of the research and development activities carried out at the (Nuclear) Research Center Karlsruhe (today KIT) since the beginning of the 1980s on the corrosion of materials which might be suitable for construction of containers for highly radioactive wastes. The report relates almost exclusively to the work performed by Dr. Emmanuel Smailos, who elaborated the corrosion of various materials at the Institute for Nuclear Waste Disposal (INE). The requirements for the containers and materials, which were subject to changes in time, are presented. The changes were strongly influenced by the changed perception of the use of nuclear energy. The selection of the materials under investigations, the boundary conditions for the corrosion experiments and the analytical methods are described. Results of the corrosion of the materials such as finegrained steel, Hastelloy C4, nodular cast iron, titanium-palladium and copper or copper-nickel alloys in typical salt solutions are summarized. The findings of special investigations, e.g. corrosion under irradiation or the influence of sulfide on the corrosion rates are shown. For construction of disposal canisters, experiments were conducted to determine the contact corrosion, the influence of the hydrogen embrittlement of Ti-Pd and fine-grained steels on the corrosion behavior as well as the corrosion behavior of welding and the influence of different welding processes with the resulting heat-affected zones on the corrosion behavior. The work was contributed to several European research programs and was well recognized in the USA. Investigations on the corrosion of steels in non-saline solutions and corrosion under interim storage conditions as well as under the expected conditions of the Konrad repository for low-level radioactive wastes are also described. In addition, the experiments on ceramic materials are presented and the results of the corrosion of Al 2 O 3 and ZrO 2 ceramics

  9. Mineralogical variations across Mariano Lake roll-type uranium deposits, McKinley County

    International Nuclear Information System (INIS)

    Sachdev, S.C.

    1980-01-01

    Mineralogy of core samples from the Mariano orebody was determined. The data obtained were used to develop exploration tools for roll-type uranium deposits. Preliminary interpretations of the physical and chemical conditions of ore deposition were made on the basis of paragenetic relationships. The host sandstones occur between the bentonitic rock units and contain scattered intercalations of detrital montmorillonitic material in the form of clay galls, stringers, and lenses derived from these bentonites. Authigenic clay minerals identified in the host rocks include cellular montmorillonite, platy chlorite, and pseudohexagonal books of kaolinite. The cellular montmorillonite is concentrated in the oxidized zone and appears to have formed prior to ore deposition. Authigenic chlorite is most abundant in the ore zone and has formed at the expense of cellular montmorillonite; its formation is interpreted as being related to the ore-forming processes. Kaolinite in sandstones is the last clay mineral to form and is enriched in the reduced zone. Calcite, considered typical of such deposits, is not found in this orebody. Iron-titanium oxides and their alteration products are the most abundant heavy-mineral species in the host rocks. In addition to anatase and rutile, the alteration products include hematite in the oxidized zone and pyrite in the ore and reduced zones. Carbonaceous material introudced later into the potential ore zone appears to have been responsible for the decomposition of Fe-Ti oxides and the formation of pyrite. The paragenetic relationship indicates oxidation of pyrite by mineralizing solutions, resulting in reduction and subsequent deposition of uranium. The positive correlation between organic carbon and uranium suggests that carbonaceous material also acted as a reductant for uranium

  10. Preparation of hard magnetic materials based on nitrogenated rare-earth iron alloys

    International Nuclear Information System (INIS)

    Guilherme, Eneida da Graca

    1999-01-01

    Nd Fe 11 Ti, Nd Fe 10.5 Mo 1.5 and Nd Fe 10.75 Mo 1.25 alloys were synthesized by reduction-diffusion calciothermic process (RDC) from neodymium chloride (NdCl 3 ), iron, titanium, molybdenum and reduction agent (metallic calcium). The effect of process variables, like temperature, time, excess amount of NdCl 3 , heating rate, and composition variation of the Nd Fe 12-x Mo x (1 ≥ x ≥ 2). Mother alloys in which 1:12 phase is major were nitrogenated by gas-solid reaction with N 2 and by chemical reaction with sodium zide (Na N 3 ). In addition, the influence of reducing particle size of the powdered mother alloys in the nitrogenation step with Na N 3 were studied. As prepared and interstitially modified Nd Fe 11 Ti, Nd Fe 10.5 Mo 1.5 and Nd Fe 10.75 Mo 1.25 alloys with nitrogen , were characterized by X-ray diffraction, Moessbauer spectroscopy, thermomagnetic, SEM and EDS. Nitrogenation by gas-solid reaction with N 2 is found to be not promising, since resulted Curie temperatures (Tc) were lower than literature values. However, nitrogenation by chemical reaction with Na N 3 was efficient with higher or same Tc than previous reported results. The average increases on Tc and volumetric expansion were 200 deg C and 4%, respectively. Milling of the mother alloys before nitrogenation at 330 deg C is preferred because reaction kinetics is enhanced. Nevertheless, at 450 deg C, a competition between the interstitially modified compound formation (alloy + N) and alloy dissociation has occurred, resulting in a Fe-α phase increase. (author)

  11. Advances in Trace Element “Fingerprinting” of Gem Corundum, Ruby and Sapphire, Mogok Area, Myanmar

    Directory of Open Access Journals (Sweden)

    F. Lin Sutherland

    2014-12-01

    Full Text Available Mogok gem corundum samples from twelve localities were analyzed for trace element signatures (LA-ICP-MS method and oxygen isotope values (δ18O, by laser fluorination. The study augmented earlier findings on Mogok gem suites that suggested the Mogok tract forms a high vanadium gem corundum area and also identified rare alluvial ruby and sapphire grains characterised by unusually high silicon, calcium and gallium, presence of noticeable boron, tin and niobium and very low iron, titanium and magnesium contents. Oxygen isotope values (δ18O for the ruby and high Si-Ca-Ga corundum (20‰–25‰ and for sapphire (10‰–20‰ indicate typical crustal values, with values >20‰ being typical of carbonate genesis. The high Si-Ca-Ga ruby has high chromium (up to 3.2 wt % Cr and gallium (up to 0. 08 wt % Ga compared to most Mogok ruby (<2 wt % Cr; <0.02 wt % Ga. In trace element ratio plots the Si-Ca-Ga-rich corundum falls into separate fields from the typical Mogok metamorphic fields. The high Ga/Mg ratios (46–521 lie well within the magmatic range (>6, and with other features suggest a potential skarn-like, carbonate-related genesis with a high degree of magmatic fluid input The overall trace element results widen the range of different signatures identified within Mogok gem corundum suites and indicate complex genesis. The expanded geochemical platform, related to a variety of metamorphic, metasomatic and magmatic sources, now provides a wider base for geographic typing of Mogok gem corundum suites. It allows more detailed comparisons with suites from other deposits and will assist identification of Mogok gem corundum sources used in jewelry.

  12. Solid residues from Italian municipal solid waste incinerators: A source for "critical" raw materials.

    Science.gov (United States)

    Funari, Valerio; Braga, Roberto; Bokhari, Syed Nadeem Hussain; Dinelli, Enrico; Meisel, Thomas

    2015-11-01

    The incineration of municipal solid wastes is an important part of the waste management system along with recycling and waste disposal, and the solid residues produced after the thermal process have received attention for environmental concerns and the recovery of valuable metals. This study focuses on the Critical Raw Materials (CRM) content in solid residues from two Italian municipal waste incinerator (MSWI) plants. We sampled untreated bottom ash and fly ash residues, i.e. the two main outputs of common grate-furnace incinerators, and determined their total elemental composition with sensitive analytical techniques such as XRF and ICP-MS. After the removal of a few coarse metallic objects from bottom ashes, the corresponding ICP solutions were obtained using strong digestion methods, to ensure the dissolution of the most refractory components that could host significant amounts of precious metals and CRM. The integration of accurate chemical data with a substance flow analysis, which takes into account the mass balance and uncertainties assessment, indicates that bottom and fly ashes can be considered as a low concentration stream of precious and high-tech metals. The magnesium, copper, antimony and zinc contents are close to the corresponding values of a low-grade ore. The distribution of the elements flow between bottom and fly ash, and within different grain size fractions of bottom ash, is appraised. Most elements are enriched in the bottom ash flow, especially in the fine grained fractions. However, the calculated transfer coefficients indicate that Sb and Zn strongly partition into the fly ashes. The comparison with available studies indicates that the CRM concentrations in the untreated solid residues are comparable with those residues that undergo post-treatment beneficiations, e.g. separation between ferrous and non-ferrous fractions. The suggested separate collection of "fresh" bottom ash, which could be processed for further mineral upgrading, can

  13. ESTIMATION OF THE STATUS OF SUPPLY OF TOMATOES GROWN IN THE LUBLIN REGION IN CERTAIN MACRO- AND MICROELEMENTS

    Directory of Open Access Journals (Sweden)

    Przemysław Tkaczyk

    2014-10-01

    Full Text Available In the years 2009–2011, in the Lublin Region, an environmental study was conducted with the objective of estimation of the supply of tomato plants with macro- and microelements. The estimation was conducted after performing chemical analyses of leaves of those plants.The leaves were collected from plantations situated in seven localities. Samples of leaves were collected during the harvest of the fruits. The chemical analyses were performed at the accredited laboratory of the Regional Chemical-Agricultural Station in Lublin. Assays performed on the material analysed included the following: dry mater, content of total nitrogen according to the Kjeldahl method, content of phosphorus – with the vanadium-molybdenum method, potassium and calcium – with the method of flame photometry, magnesium, copper, zinc, manganese and iron with the ASA method, and boron – with the curcumin method. The mean contents and standard deviation of the content of macro- (N, P, K, Ca and Mg and microelements (Cu, Zn, Fe, Mn, B in tomato leaves were calculated, and correlations occurring among those elements were determined. In most cases the level of supply in macroelements of tomatoes grown in plantations in the Lublin Region indicated exceeding of the optimum range. Only the content of nitrogen in the leaves was within the optimum range, while the levels of phosphorus, potassium, calcium and magnesium exceeded that range. The supply of tomatoes grown in the Lublin Region with microelements in most cases exceeded the optimum range, and in one case it was at the deficit level. The optimum range was exceeded for the leaf content of copper, zinc, manganese and iron; the deficit content was related to boron. It was found that among the assayed macro- (N, P, K, Ca, Mg and microelements (Cu, Zn, Mn, Fe and B only in a few cases (3 there appeared significant positive correlations between the elements assayed. It should be noted, however, that only in a single case the

  14. Chemical constituents and sources of ambient particulate air pollution and biomarkers of endothelial function in a panel of healthy adults in Beijing, China

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Shaowei; Yang, Di; Pan, Lu; Shan, Jiao; Li, Hongyu; Wei, Hongying [Department of Occupational and Environmental Health Sciences, Peking University School of Public Health, Beijing (China); Wang, Bin [Institute of Reproductive & Child Health, Peking University School of Public Health, Beijing (China); Huang, Jing [Department of Occupational and Environmental Health Sciences, Peking University School of Public Health, Beijing (China); Baccarelli, Andrea A. [Department of Environmental Health, Harvard T.H. Chan School of Public Health, Boston, MA (United States); Shima, Masayuki [Department of Public Health, Hyogo College of Medicine, Hyogo (Japan); Deng, Furong, E-mail: lotus321321@126.com [Department of Occupational and Environmental Health Sciences, Peking University School of Public Health, Beijing (China); Guo, Xinbiao, E-mail: guoxb@bjmu.edu.cn [Department of Occupational and Environmental Health Sciences, Peking University School of Public Health, Beijing (China)

    2016-08-01

    Background: Exposure to ambient air pollution has been associated with endothelial dysfunction as reflected by short-term alterations in circulating biomarkers, but the chemical constituents and pollution sources behind the association has been unclear. Methods: We investigated the associations between various ambient air pollutants including gases and 31 chemical constituents and seven sources of fine particles (PM{sub 2.5}) and biomarkers of endothelial function, including endothelin-1 (ET-1), E-selectin, soluble intercellular adhesion molecule 1 (ICAM-1) and vascular cell adhesion molecule 1 (VCAM-1), based on 462 repeated measurements in a panel of 40 college students who were followed for three study periods before and after relocating from a suburban area to an urban area in Beijing, China in 2010–2011. Air pollution data were obtained from central air-monitoring stations. Linear mixed-effects models were used to estimate the changes in biomarkers associated with exposures. Results: Total PM{sub 2.5} mass showed few appreciable associations with examined biomarkers. However, several PM{sub 2.5} constituents and related sources showed significant associations with examined biomarkers. PM{sub 2.5} from dust/soil and several crustal and transition metals, including strontium, iron, titanium, cobalt and magnesium, were significantly associated with increases in ET-1 at 1-day average; manganese and potassium were significantly associated with increases in ICAM-1 at 2-day average; and PM{sub 2.5} from industry and metal cadmium were significantly associated with decreases in VCAM-1 at 1-day average. In addition, carbon monoxide was significantly associated with increasing ICAM-1 at 1-day and 2-day averages, whereas nitric oxide was significantly associated with decreasing ICAM-1 at 1-day and 3-day averages. Conclusions: Our results suggest that certain PM{sub 2.5} metal constituents were more closely associated with circulating biomarkers of endothelial function

  15. The rapakivi granite plutons of Bodom and Obbnäs, southern Finland: petrography and geochemistry

    Directory of Open Access Journals (Sweden)

    Kosunen, P.

    1999-12-01

    Full Text Available The Obbnäs and Bodom granite plutons of southernmost Finland show the typical petrographic and geochemical features of the Proterozoic rapakivi granites in Finland and elsewhere: they cut sharply across the 1900 Ma Svecofennian metamorphic bedrock and have the geochemical characteristics of subalkaline A-type granites. The Bodom pluton is composed of porphyritic granites (hornblende-, hornblende-biotite-, and biotite-bearing varieties and an even-grained granite that probably represent two separate intrusive phases. This lithologic variation does not occur in the Obbnäs pluton, which is almost entirely composed of porphyritic hornblende-biotite granite that gradually becomes more mafic to the southwest. Three types of hybrid granitoids resulting from magma mingling and mixing occur on the southwestern tip of the Obbnäs peninsula. The Bodom granites are syenogranites, whereas the composition of the Obbnäs granite varies from syeno- to monzogranite. The main silicates of both the Bodom and Obbnäs granites are quartz, microcline, plagioclase (An1541, biotite (siderophyllite, and generally also amphibole (ferropargasite or hastingsite. Plagioclase-mantled alkali feldspar megacrysts are absent or rare. The accessory minerals are fluorite, allanite, zircon, apatite, and iron-titanium oxides; the Obbnäs granite also contains titanite. The Bodom and Obbnäs granites are metaluminous to weakly peraluminous, with average A/CNK of 1.00 and 1.05, respectively, have high Fe/Mg (average FeOtot/[FeOtot+MgO] is 0.94 for the Bodom and 0.87 for the Obbnäs granites, and high Ga/Al (3.78 to 5.22 in Bodom and 2.46 to 4.18 in Obbnäs. The REE contents are high with LREE-enriched chondrite-normalized patterns and moderate (Obbnäs to relatively strong (Bodom negative Eu-anomalies. The Obbnäs granite is enriched in CaO, TiO2, MgO, and FeO, and depleted in SiO2 and K2O compared to the Bodom granites. Also, there are differences in the Ba, Rb, and Sr contents of

  16. Dysprosium, the balance problem, and wind power technology

    International Nuclear Information System (INIS)

    Elshkaki, Ayman; Graedel, T.E.

    2014-01-01

    Highlights: • We investigate the impacts of the increasing market share of wind power on the demand and supply of REE. • The analysis is carried out using a dynamic material flow and stock model and three scenarios for Dy supply. • The supply of Dy from all deposits will likely lead to an oversupply of the total REEs, Nd, La, Ce and Y. • The supply of Dy from critical REE or Dy rich deposits will likely lead to an oversupply of Ce and Y only. • Large quantities of thorium will be co-produced as a result of Dy demand that needs to be managed carefully. - Abstract: Wind power technology is one of the cleanest electricity generation technologies that are expected to have a substantial share in the future electricity mix. Nonetheless, the expected increase in the market share of wind technology has led to an increasing concern of the availability, production capacity and geographical concentration of the metals required for the technology, especially the rear earth elements (REE) neodymium (Nd) and the far less abundant dysprosium (Dy), and the impacts associated with their production. Moreover, Nd and Dy are coproduced with other rare earth metals mainly from iron, titanium, zirconium, and thorium deposits. Consequently, an increase in the demand for Nd and Dy in wind power technology and in their traditional applications may lead to an increase in the production of the host metals and other companion REE, with possible implications on their supply and demand. In this regard, we have used a dynamic material flow and stock model to study the impacts of the increasing demand for Nd and Dy on the supply and demand of the host metals and other companion REE. In one scenario, when the supply of Dy is covered by all current and expected producing deposits, the increase in the demand for Dy leads to an oversupply of 255 Gg of total REE and an oversupply of the coproduced REE Nd, La, Ce and Y. In the second and third scenarios, however, when the supply of Dy is

  17. Long term storage of explosively erupted magma at Nevado de Toluca volcano, Mexico

    Science.gov (United States)

    Arce, J. L.; Gardner, J.; Macias, J. L.

    2007-12-01

    Dacitic magmas production is common in subduction-related volcanoes, occurring in those with a long period of activity as a result of the magmatic evolution. However, in this evolution many factors (i.e. crystal fractionation, assimilation, magma mixing) can interact to produce dacites. Nevado de Toluca volcano (4,680 masl; 19°09'N; 99°45'W) Central Mexico has recorded a long period of time producing dacites explosively, at least during 42 ka of activity, involving several km3 of magma, with two important Plinian-type eruptions occurred at ~21.7 ka (Lower Toluca Pumice) and ~10.5 ka (Upper Toluca Pumice). Questions like, what was the mechanism responsible to produce voluminous dacitic magma and how the volatiles and pressure changed in the Nevado de Toluca system, remain without answers. Dacites from the Lower Toluca Pumice (LTP) contain plagioclase, amphibole, iron-titanium oxides, and minor resorbed biotite, set in a glassy-vesicular matrix and the Upper Toluca Pumice (UTP) dacites contain the same mineral phases plus orthopyroxene. Ilmenite- ulvospinel geothermometry yielded a temperature of ~860°C for the LTP dacite, a little hotter than the UTP (~ 840°C). Based on hydrothermal experiments data, amphibole is stable above 100 MPa under 900°C, while plagioclase crystallizes up to 250-100 MPa at temperatures of 850-900°C. Pyroxene occurs only at pressures of 200-100 MPa with its respective temperatures of 825-900°C. Water contents in the LTP magma (2-3.5 wt %) are similar to that calculated for the UTP magma (1.3-3.6 wt %). So, there are only small changes in temperature and pressure from ~21.7 ka to 10.5 ka. It is noteworthy that orthopyroxene is absent in the LTP, however reaction-rimmed biotite (probably xenocrystic) is commonly observed in all dacites. Hence, almost all dacitic magmas seem to be stored at relatively similar pressures, water contents, and temperatures. All of these data could suggest repetitive basic magma injections producing the

  18. Population data on calcium in drinking water and hip fracture: An association may depend on other minerals in water. A NOREPOS study.

    Science.gov (United States)

    Dahl, Cecilie; Søgaard, Anne Johanne; Tell, Grethe S; Forsén, Lisa; Flaten, Trond Peder; Hongve, Dag; Omsland, Tone Kristin; Holvik, Kristin; Meyer, Haakon E; Aamodt, Geir

    2015-12-01

    The Norwegian population has among the highest hip fracture rates in the world. The incidence varies geographically, also within Norway. Calcium in drinking water has been found to be beneficially associated with bone health in some studies, but not in all. In most previous studies, other minerals in water have not been taken into account. Trace minerals, for which drinking water can be an important source and even fulfill the daily nutritional requirement, could act as effect-modifiers in the association between calcium and hip fracture risk. The aim of the present study was to investigate the association between calcium in drinking water and hip fracture, and whether other water minerals modified this association. A survey of trace metals in 429 waterworks, supplying 64% of the population in Norway, was linked geographically to the home addresses of patients with incident hip fractures (1994-2000). Drinking water mineral concentrations were divided into "low" (below and equal waterworks average) and "high" (above waterworks average). Poisson regression models were fitted, and all incidence rate ratios (IRRs) were adjusted for age, geographic region, urbanization degree, type of water source, and pH of the water. Effect modifications were examined by stratification, and interactions between calcium and magnesium, copper, zinc, iron and manganese were tested both on the multiplicative and the additive scale. Analyses were stratified on gender. Among those supplied from the 429 waterworks (2,110,916 person-years in men and 2,397,217 person-years in women), 5433 men and 13,493 women aged 50-85 years suffered a hip fracture during 1994-2000. Compared to low calcium in drinking water, a high level was associated with a 15% lower hip fracture risk in men (IRR=0.85, 95% CI: 0.78, 0.91) but no significant difference was found in women (IRR=0.98, 95%CI: 0.93-1.02). There was interaction between calcium and copper on hip fracture risk in men (p=0.051); the association

  19. Hydrogen storage materials with focus on main group I-II elements

    Energy Technology Data Exchange (ETDEWEB)

    Andreasen, Anders

    2005-07-01

    A future hydrogen based society, viz. a society in which hydrogen is the primary energy carrier, is viewed by many as a solution to many of the energy related problems of the world {integral} the ultimate problem being the eventual depletion of fossil fuels. Although, for the hydrogen based society to become realizable, several technical difficulties must be dealt with. Especially, the transport sector relies on a cheap, safe and reliable way of storing hydrogen with high storage capacity, fast kinetics and favourable thermodynamics. No potential hydrogen storage candidate has been found yet, which meets all the criteria just summarized. The hydrogen storage solution showing the greatest potential in fulfilling the hydrogen storage criteria with respect to storage capacity, is solid state storage in light metal hydrides e.g. alkali metals and alkali earth metals. The remaining issues to be dealt with mainly concerns the kinetics of hydrogen uptake/release and the thermal stability of the formed hydride. In this thesis the hydrogen storage properties of some magnesium based hydrides and alkali metal tetrahydridoaluminates, a subclass of the so called complex hydrides, are explored in relation to hydrogen storage. After briefly reviewing the major energy related problems of the world, including some basic concepts of solid state hydrogen storage the dehydrogenation kinetics of various magnesium based hydrides are investigated. By means of time resolved in situ X-ray powder diffraction, quantitative phase analysis is performed for air exposed samples of magnesium, magnesium-copper, and magnesium-aluminum based hydrides. From kinetic analysis of the different samples it is generally found that the dehydrogenation kinetics of magnesium hydride is severely hampered by the presence of oxide impurities whereas alloying with both Cu and Al creates compounds significantly less sensitive towards contamination. This leads to a phenomenological explanation of the large

  20. Qualidade da água em uma microbacia hidrográfica do Rio Piracicaba, SP Water quality in a small catchment of Piracicaba River, SP

    Directory of Open Access Journals (Sweden)

    Ariovaldo A. T. Lucas

    2010-09-01

    Full Text Available A microbacia do Ribeirão dos Marins, afluente do Rio Piracicaba, é importante ao município de Piracicaba, São Paulo, haja vista que concentra a maior área de produção de hortaliças, as quais são irrigadas com as águas do ribeirão. Com o objetivo de avaliar a qualidade da água, coletaram-se amostras de fevereiro a dezembro de 2005 em sete pontos ao longo do ribeirão, considerando-se o uso e ocupação do solo. As variáveis de qualidade de água analisadas foram: físicas e químicas: sedimentos em suspensão, pH, condutividade elétrica, alcalinidade, turbidez, potássio, cálcio, magnésio, cobre, ferro, manganês, zinco, sódio, fósforo, sulfato, cloreto, nitrogênio amoniacal e nitrato. As análises foram realizadas no Laboratório de Ecologia do Instituto de Estudos Florestais e no Laboratório de Água do Departamento de Engenharia Rural, ambos pertencentes à ESALQ-USP. Os resultados obtidos foram comparados com a Resolução nº 357 de 17 março de 2005, do Conselho Nacional de Meio Ambiente (CONAMA que estabelece a classificação das águas brasileiras. As águas do ribeirão dos Marins apresentaram-se fora do padrão estabelecido pela Resolução 357/2005 do CONAMA, para a irrigação de hortaliças.The Marins creek watershed is important to the Piracicaba municipal district because it concentrates a large area of horticultural production, which is irrigated with the creek water. With the aim to evaluate the water quality, samples were collected from February to December 2005 at seven points along the creek according to land use. The parameters of quality analyzed were physical and chemical: suspended sediments, pH, electrical conductivity, alkalinity, turbidity, potassium, calcium, magnesium, copper, iron, manganese, zinc, sodium, phosphorus, sulfate, chloride, ammonia nitrogen, and nitrate. The analyses were made at the Ecology Laboratory of Forest Studies Institute and Water Laboratory at the Rural Engineering

  1. Bebidas saborizadas obtidas de extratos de quirera de arroz, de arroz integral e de soja Flavored drinks obtained from extracts of broken rice and brown rice

    Directory of Open Access Journals (Sweden)

    Manoel Soares Soares Junior

    2010-04-01

    Full Text Available Conduziu-se este trabalho, com o objetivo de desenvolver bebidas elaboradas com extratos de quirera de arroz e de arroz integral e comparar as características químicas e sensoriais destas com bebida elaborada com extrato de soja. Utilizou-se um delineamento inteiramente casualisado, com três tratamentos (bebidas de extrato de quirera de arroz, extrato de arroz integral e extrato soja. As seguintes análises foram realizadas: umidade, cinzas, proteínas, lipídios, carboidratos totais, valor energético, cálcio, magnésio, cobre, manganês, ferro e zinco. Também determinou-se a aceitabilidade e a intenção de compra. A bebida elaborada com o extrato de soja contém maiores teores de cinzas, proteínas, lipídeos e minerais em relação ao extrato de quirera de arroz, que possui o maior teor de carboidratos e valor energético. Todas as bebidas obtiveram boa aceitação, com intenção de compra pela população entrevistada acima de 95%, sendo que mais de 99% dos provadores comprariam a bebida elaborada com o extrato de arroz integral (tratamento de maior aceitação. As bebidas elaboradas com extrato de arroz integral ou de quirera de arroz são uma alternativa viável para as pessoas que possuam intolerância à lactose do leite de origem animal e/ou alergia às proteínas da soja.The aim of this work was to develop drinks based on extracts of broken rice and brown rice and to compare their chemical and sensory characteristics with a drink made of soy extract. A totally randomized design was applied, with three treatments (broken rice extract, brown rice extract and soy extract drinks. The following analyses were performed: moisture, ash, protein, lipids, total carbohydrates, caloric value, calcium, magnesium, copper, manganese, iron and zinc, besides the determination of consumer acceptability and buying intention. The soy-based drink has the highest ash, protein, lipids and mineral contents when compared to broken rice extract, which in

  2. Lunar remote sensing and measurements

    Science.gov (United States)

    Moore, H.J.; Boyce, J.M.; Schaber, G.G.; Scott, D.H.

    1980-01-01

    , and the lunar dipole field was revised to no more than 6x 10 19 gauss. High-resolution mapping of fields of weak remanent magnetism (to 0.1 gamma) was made possible by the Apollo plasma and energetic-particle experiment. Although the causes of remanent magnetism are poorly understood, correlations with geologic units suggest the results may ultimately have farreaching significance to lunar history. Maria are much less structured by strong surface magnetic anomalies than the highlands. The strongest anomalies are associated with ejecta of farside basins, plains materials filling pre-Imbrian craters, and other old Imbrian to pre-Imbrian units. The high remanent fields could be due to cooling of ejecta units in an ancient magnetic field, lunar regolith maturity, extensive reworking and disruption of a magnetized layer, or simply surface roughness. Orbital geochemical experiments have shown that lunar high lands have larger Al: Si ratios and smaller Mg: Si ratios than maria. These two ratios are inversely related on a regional basis. With the exception of fresh craters, albedo and Al : Si ratios vary directly, showing that compositional differences as well as exposure of fresh materials are responsible for high albedos. Statistically treated data show that geologic contacts and compositional boundaries are concentric and can be roughly matched. Some craters on mare material have penetrated the mare fill, bringing highland-type materials to the surface. Natural radioactivity from thorium, potassium, and uranium is inversely correlated with elevation. Mare regions are enriched in iron, titanium, and magnesium relative to the highlands. Orbital bistatic-radar results provide estimates of surface roughness at two scale lengths (about 30 m and 250 m), which agree with visual estimates of roughness. The dielectric constant of the lunar surface, where sampled, is uniform to 13-cm radar and near 3. Slope frequency distributions measured by the radar vary and

  3. Petrology of arkosic sandstones, Pennsylvanian Minturn Formation and Pennsylvanian and Permian Sangre de Cristo Formation, Sangre de Cristo Range, Colorado - data and preliminary interpretations

    Science.gov (United States)

    Lindsey, D.A.

    2000-01-01

    abundance of quartz (and SiO2) is enhanced by weathering and transport, which destroys feldspar and rock fragments. Weathering also preferentially destroys plagioclase (and removes Na2O) over potassium feldspar. Thus, as fresh sodic arkose detritus is weathered and transported in the fluvial environment, it becomes potassic and quartz-rich. Stratigraphic profiles of mineral and major oxide abundance reveal that weathering and transport, including reworking by marine currents, was most effective in reducing plagioclase and enhancing quartz content of arkosic sediment in the Minturn Formation near Marble Mountain. In general, the quartz-poor, sodic arkoses of the Sangre de Cristo Formation indicate little weathering in the source area or during transport. Iron-titanium oxides and other heavy minerals, notably zircon and sphene, tend to be most abundant in the Sangre de Cristo Formation. Although concentrated locally as fluvial placers, the overall abundance of heavy minerals probably reflects lack of weathering and proximity to source. The degree of weathering and destruction of unstable grains (feldspar and rock fragments) in the Minturn and Sangre de Cristo Formations of the Sangre de Cristo Range was dependent on rates of uplift and erosion as much as climate (wet versus dry). Reworking by marine currents further reduced the proportion of unstable grains during Minturn time. Sodic (plagioclase-rich), quartz-poor arkose in the coarse, conglomeratic Sangre de Cristo Formation is the product of rapid uplift and erosion.

  4. Release of microspherolites and metals extraction from energetical fly ashes by Bacillus isolates

    Directory of Open Access Journals (Sweden)

    Štyriaková Iveta

    2000-09-01

    they have a different resistance to the bacterial destruction. Metals (iron, titanium are comprised in an oxide form both in a non-combusted residue and allotrimorphic grains with amorphous aluminosilicate spherical particles.SEM enabled us to observe that the fresh fly-ash contains disseminated aluminosilicate spherical particles, with the size 1-70 µm that are released, probably together with metals, especially iron and titanium. The yielding of individual elements show a lower extraction of iron (3,3% and titanium (15,2% in the case of sample of 5 year - deposited fly-ash and a slightly higher yielding of iron (6,2% and titanium (29,1% in the case of sample of 20 year deposited fly-ash. A long-term deposition of energy fly-ash causes chemical and mineralogical changes as a result of weathering processes demonstrated by a lower extraction of metals from fly-ash.Although acids produced by Bacillus spp. were not measured in these experiments, in our previous experiments were detected several organic acids such as acetic, butyric, pyruvic, lactic, and formic acids after bioleaching of aluminosilicate samples.

  5. Chemical Looping Combustion of Solid Fuels in a 10 kWth Unit Combustion de charge solide en boucle chimique dans une unité de 10 kWth

    Directory of Open Access Journals (Sweden)

    Berguerand N.

    2011-02-01

    Full Text Available The present study is based on previous results from batch experiments which were conducted in a 10 kWth chemical looping combustor for solid fuels using ilmenite, an iron titanium oxide, as the oxygen carrier with two solid fuels: a Mexican petroleum coke and a South African bituminous coal. These experiments involved testing at different fuel reactor temperatures, up to 1030°C, and different particle circulation rates between the air and fuel reactors. Previous results enabled modeling of the reactor system. In particular, it was possible to derive a correlation between measured operational data and actual circulation mass flow, as well as a model that describes the carbon capture efficiency as a function of the residence time and the char reactivity. Moreover, the kinetics of char conversion could be modeled and results showed good agreement with experimental values. The purpose of the present study was to complete these results by developing a model to predict the conversion of syngas with ilmenite in the fuel reactor. Here, kinetic data from investigations of ilmenite in TGA and batch fluidized bed reactors were used. Results were compared with the actual conversions during operation in this 10 kWth unit. Cette étude est basée sur des résultats antérieurs obtenus dans une unité de combustion de charges solides en boucle chimique d’une puissance de 10 kWth. Le transporteur d’oxygène utilisé est de l’ilménite, un minerai de fer et de titane, et les charges solides étudiées sont, d’une part, un coke de pétrole mexicain et, d’autre part, un charbon bitumineux sud africain. Les résultats expérimentaux ont été obtenus à des températures allant jusqu’à 1030°C avec différents débits de transporteur d’oxygène entre les réacteurs d’oxydation et de réduction. La modélisation de la combustion en boucle chimique de charges solides a déjà permis d’établir une corrélation entre le débit de circulation de

  6. Rapid Radiochemical Analyses in Support of Fukushima Nuclear Accident - 13196

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Sherrod L.; Culligan, Brian K.; Hutchison, Jay B. [Savannah River National Laboratory, Building 735-B, Aiken, SC 29808 (United States)

    2013-07-01

    precipitations, followed by Sr-Resin separation and gas flow proportional counting. To achieve a lower detection limit for analysis of some of the Japanese soil samples, a 10 gram aliquot of soil was taken, acid-leached and processed with similar preconcentration chemistry. The MDA using this approach was ∼0.03 pCi/g (1.1 mBq/g)/, which is less than the 0.05-0.10 pCi/g {sup 90}Sr levels found in soil as a result of global fallout. The chemical yields observed for the Japanese soil samples was typically 75-80% and the laboratory control sample (LCS) and matrix spike (MS) results looked very good for this work Individual QC results were well within the ± 25% acceptable range and the average of these results does not show significant bias. Additional data for a radiostrontium in soil method for 50 gram samples will also be presented, which appears to be a significant step forward based on looking at the current literature, with higher chemical yields for even larger sample aliquots and lower MDA [5, 6, 7] Hou et al surveyed a wide range of separation methods for Pu in waters and environmental solid samples [8]. While there are many actinide methods in the scientific literature, few would be considered rapid due to the tedious and time-consuming steps involved. For actinide analyses in soil, a new rapid method for the determination of actinide isotopes in soil samples using both alpha spectrometry and inductively-coupled plasma mass spectrometry was employed. The new rapid soil method utilizes an acid leaching method, iron/titanium hydroxide precipitation, a lanthanum fluoride soil matrix removal step, and a rapid column separation process with TEVA Resin. The large soil matrix is removed easily and rapidly using these two simple precipitations with high chemical recoveries and effective removal of interferences. [9, 10] Vacuum box technology and rapid flow rates were used to reduce analytical time. Challenges associated with the mineral content in the volcanic soil will be

  7. High-temperature, large-volume, lavalike ash-flow tuffs without calderas in southwestern Idaho

    Science.gov (United States)

    Ekren, E.B.; McIntyre, David H.; Bennett, Earl H.

    1984-01-01

    Rhyolitic rocks were erupted from vents in and adjacent to the Owyhee Mountains and Owyhee Plateau of southwestern Idaho from 16 m.y. ago to about 10 m.y. ago. They were deposited on a highly irregular surface developed on a variety of basement rocks that include granitic rocks of Cretaceous age, quartz latite and rhyodacite tuffs and lava flows of Eocene age, andesitic and basaltic lava flows of Oligocene age, and latitic and basaltic lava flows of early Miocene age. The rhyolitic rocks are principally welded tuffs that, regardless of their source, have one feature in common-namely internal characteristics indicating en-masse, viscous lavalike flowage. The flowage features commonly include considerable thicknesses of flow breccia at the bases of various cooling units. On the basis of the tabular nature of the rhyolitic deposits, their broad areal extents, and the local preservation of pyroclastic textures at the bases, tops, and distal ends of some of the deposits, we have concluded that the rocks were emplaced as ash flows at extremely high temperatures and that they coalesced to liquids before final emplacement and cooling. Temperatures of l090?C and higher are indicated by iron-titanium oxide compositions. Rhyolites that are about 16 m.y. old are preserved mostly in the downdropped eastern and western flanks of the Silver City Range and they are inferred to have been erupted from the Silver City Range. They rarely contain more than about 2 percent phenocrysts that consist of quartz and subequal amounts of plagioclase and alkali feldspar; commonly, they contain biotite, and they are the only rhyolitic rocks in the area to do so. The several rhyolitic units that are 14 m.y. to about 10 m.y. old contain only pyroxene-principally ferriferous and intermediate pigeonites-as mafic constituents. The rhyolites of the Silver City Range comprise many cooling units, none of which can be traced for great distances. Rocks erupted from the Owyhee Plateau include two sequences