WorldWideScience

Sample records for investigation des performances

  1. Analyse des caractéristiques structurelles et des performances ...

    African Journals Online (AJOL)

    SARAH

    28 févr. 2014 ... performances technico-économiques de la riziculture irriguée en Côte d' .... en nous basant sur les prix des intrants et des produits en vigueur au cours ..... la recherche et de la vulgarisation et le transfert de technologies ; (2) ...

  2. Complex posttraumatic stress disorder: an exploratory investigation of PTSD and DES NOS among Dutch war veterans

    NARCIS (Netherlands)

    Jongedijk, R. A.; Carlier, I. V.; Schreuder, B. J.; Gersons, B. P.

    1996-01-01

    The recently developed concept Disorder of Extreme Stress Not Otherwise Specified (DES NOS) or complex posttraumatic stress disorder (complex PTSD) is designed to encompass long-standing symptoms not present in PTSD. An exploratory investigation of PTSD and DES NOS was performed with the Structured

  3. Performances de ponte et qualité des oeufs des poules pondeuses ...

    African Journals Online (AJOL)

    Les performances de ponte et la qualité des oeufs de 216 poules pondeuses ISA Brown âgées de 21 semaines ont été déterminées en les alimentant avec des rations contenant des feuilles séchées de manioc (Manihot esculenta, Crantz). Pendant douze semaines, trois groupes de 72 poules chacun (réparties en trois ...

  4. L’impact des privatisations sur la performance des entreprises françaises

    OpenAIRE

    Michel Albouy; Hassan Obeid

    2007-01-01

    (VF)Les déficits budgétaires de nombreux pays, la faiblesse des performances financières des entreprises publiques et les développements récents de la recherche en finance incitent de nombreux États à céder leurs entreprises au secteur privé. Après un panorama du mouvement de privatisation dans le monde et particulièrement en France ainsi qu’un exposé des principaux courants théoriques qui confortent ce mouvement, cet article expose les résultats d’une étude empirique réalisée sur les privati...

  5. Performance of Cubic Eos At High Pressures Performance des équations d'état cubiques à hautes pressions

    Directory of Open Access Journals (Sweden)

    Stamataki S.

    2006-12-01

    Full Text Available This paper presents an evaluation of the performance of cubic equations of state in the prediction of the phase behavior of hyperbaric mixtures. It points out a number of problems that should be resolved in a cooperative way. Items related to EoS parameter definitions such as interaction coefficients, critical properties of hydrocarbon compounds and volume translation are investigated. VLE experimental data, isothermal flash compositional and volumetric data up to 4000 bar as well as PVT data up to 2000 bar for binary mixtures and synthetic multicomponent systems have been considered in this study. Correlation and prediction results are presented with the translated and modified Peng-Robinson (t-mPR EoS. It is shown that serious problems are encountered at high pressure, when extrapolated interaction coefficients are used. Prediction of saturation pressures of gas condensates is more satisfactory when binary interaction parameters are obtained from high pressure dew point correlations. Compositional and volumetric predictions are remarkable under the assumption that definition of the EoS parameters is based on high pressure VLE binary data. Contradictory results are obtained with different methods for estimating the critical properties of high molecular weight hydrocarbons. Generalized expressions for the volume translation appear to be very efficient even at very high temperatures and pressures (up to 2000 bar. Cet article présente une évaluation des performances des équations d'états (EoS cubiques pour la prévision des comportements de phases des mélanges hyperbares. Il met en évidence un certain nombre de problèmes auxquels il devrait être répondu d'une manière coopérative. Les points relatifs à la définition des paramètres des EoS, tels que les coefficients d'interaction, les propriétés critiques des composants hydrocarbonés et la translation de volume sont examinés. Plusieurs types d'informations ont été pris en compte

  6. Performances de production des cobayes ( Cavia porcellus L.) en ...

    African Journals Online (AJOL)

    Au Cameroun, l'élevage des cobayes se pratique encore dans les cuisines et à même le sol et leur alimentation est essentiellement à base des déchets de cuisine. Le souci d'intensifier la production nécessite la détermination des besoins réels du cobaye afin d'asseoir de façon rationnelle sa table de rationnement.

  7. La moindre performance scolaire des enfants de couples mixtes en France

    OpenAIRE

    Unterreiner, Anne

    2013-01-01

    Rares sont les études portant spécifiquement sur les enfants de couples mixtes en France. Cette population est souvent confondue avec les descendants d’immigrés dans l’étude des performances scolaires de ceux-ci. Or, la socialisation intrafamiliale et le rapport au pays de résidence des enfants de couples mixtes divergent de ceux des descendants de Français et de ceux des descendants d’immigrés. Se pose alors la question de savoir si la définition de leur univers normatif et leur degré de sti...

  8. Human Performance Investigation Process (HPIP)

    International Nuclear Information System (INIS)

    Paradies, M.; Unger, L.

    1991-01-01

    The Human Performance Investigation Process (HPIP) is a systematic method for use by Nuclear Regulatory Commission (NRC) personnel investigating incidents that include human error. The combination of techniques into an investigation procedure is designed to help investigators (for example, a typical resident inspector with little human factors training) find the root causes of human performance problems that contributed to the incident. This summary briefly outlines the process and the techniques. The full paper provides a more in-depth description of the process, the techniques, and their development and evaluation. The complete documentation of the process will be presented in NUREG/CR-5455, Development of the NRC Human Performance Investigation Process (HPIP) to be published late in 1991

  9. Elaboration de nouvelles approches micromecaniques pour l'optimisation des performances mecaniques des materiaux heterogenes

    Science.gov (United States)

    Aboutajeddine, Ahmed

    Les modeles micromecaniques de transition d'echelles qui permettent de determiner les proprietes effectives des materiaux heterogenes a partir de la microstructure sont consideres dans ce travail. L'objectif est la prise en compte de la presence d'une interphase entre la matrice et le renforcement dans les modeles micromecaniques classiques, de meme que la reconsideration des approximations de base de ces modeles, afin de traiter les materiaux multiphasiques. Un nouveau modele micromecanique est alors propose pour tenir compte de la presence d'une interphase elastique mince lors de la determination des proprietes effectives. Ce modele a ete construit grace a l'apport de l'equation integrale, des operateurs interfaciaux de Hill et de la methode de Mori-Tanaka. Les expressions obtenues pour les modules globaux et les champs dans l'enrobage sont de nature analytique. L'approximation de base de ce modele est amelioree par la suite dans un nouveau modele qui s'interesse aux inclusions enrobees avec un enrobage mince ou epais. La resolution utilisee s'appuie sur une double homogeneisation realisee au niveau de l'inclusion enrobee et du materiau. Cette nouvelle demarche, permettra d'apprehender completement les implications des approximations de la modelisation. Les resultats obtenus sont exploites par la suite dans la solution de l'assemblage de Hashin. Ainsi, plusieurs modeles micromecaniques classiques d'origines differentes se voient unifier et rattacher, dans ce travail, a la representation geometrique de Hashin. En plus de pouvoir apprecier completement la pertinence de l'approximation de chaque modele dans cette vision unique, l'extension correcte de ces modeles aux materiaux multiphasiques est rendue possible. Plusieurs modeles analytiques et explicites sont alors proposee suivant des solutions de differents ordres de l'assemblage de Hashin. L'un des modeles explicite apparait comme une correction directe du modele de Mori-Tanaka, dans les cas ou celui ci echoue a

  10. Mesurer la performance des chercheurs, au risque de la bureaucratie

    OpenAIRE

    Berland , Nicolas; Dreveton , Benjamin

    2012-01-01

    Nous sommes entrés dans l'ère des sociétés de la connaissance qui nous amène à considérer les activités de recherche avec une acuité nouvelle. Exercée jusqu'alors en marge de la société productive, la recherche s'est vue demandée des comptes sur son efficacité et son utilité. Les chercheurs sont devenus " accountable " (Osterloh et al., 2008). Des pratiques de contrôle qui existaient déjà se sont durcies, professionnalisées et institutionnalisées. Dans le cadre de cet article, nous chercheron...

  11. Nizet Jean, Pichault François, Les performances des organisations africaines : pratiques de gestion en contexte incertain

    Directory of Open Access Journals (Sweden)

    David Laloy

    2011-02-01

    Full Text Available Cet ouvrage, dirigé par Jean Nizet et François Pichault, propose d’aborder la question du fonctionnement et des performances des organisations africaines en dépassant la posture “radicale” selon laquelle les caractéristiques de la culture africaine (manque d’expérience et de formation des entrepreneurs, clientélisme et corruption, prégnance des cultures traditionnelles et non rationnelles... expliqueraient à elles seules l’inhibition du développement des organisations. Ce type d’approche, qu...

  12. Etude de la performance des radars hautes-frequences CODAR et WERA pour la mesure des courants marins en presence partielle de glace de mer

    Science.gov (United States)

    Kamli, Emna

    Les radars hautes-frequences (RHF) mesurent les courants marins de surface avec une portee pouvant atteindre 200 kilometres et une resolution de l'ordre du kilometre. Cette etude a pour but de caracteriser la performance des RHF, en terme de couverture spatiale, pour la mesure des courants de surface en presence partielle de glace de mer. Pour ce faire, les mesures des courants de deux radars de type CODAR sur la rive sud de l'estuaire maritime du Saint-Laurent, et d'un radar de type WERA sur la rive nord, prises pendant l'hiver 2013, ont ete utilisees. Dans un premier temps, l'aire moyenne journaliere de la zone ou les courants sont mesures par chaque radar a ete comparee a l'energie des vagues de Bragg calculee a partir des donnees brutes d'acceleration fournies par une bouee mouillee dans la zone couverte par les radars. La couverture des CODARs est dependante de la densite d'energie de Bragg, alors que la couverture du WERA y est pratiquement insensible. Un modele de fetch appele GENER a ete force par la vitesse du vent predite par le modele GEM d'Environnement Canada pour estimer la hauteur significative ainsi que la periode modale des vagues. A partir de ces parametres, la densite d'energie des vagues de Bragg a ete evaluee pendant l'hiver a l'aide du spectre theorique de Bretschneider. Ces resultats permettent d'etablir la couverture normale de chaque radar en absence de glace de mer. La concentration de glace de mer, predite par le systeme canadien operationnel de prevision glace-ocean, a ete moyennee sur les differents fetchs du vent selon la direction moyenne journaliere des vagues predites par GENER. Dans un deuxieme temps, la relation entre le ratio des couvertures journalieres obtenues pendant l'hiver 2013 et des couvertures normales de chaque radar d'une part, et la concentration moyenne journaliere de glace de mer d'autre part, a ete etablie. Le ratio des couvertures decroit avec l'augmentation de la concentration de glace de mer pour les deux types

  13. Investigation of the glide modes of single crystals of beryllium; Etude des modes de glissement de monocristaux de beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Regnier, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-05-01

    The flow characteristics of single crystals of beryllium specially oriented for slip along a single plane and a single direction have been thoroughly investigated. The elastic limit and the strain hardening in basal glide have been investigated in the temperature range (-195 deg. C, 400 deg. C) in tension as well as in compression. Observation of the slip lines and of the dislocation configurations have also been made in addition to the mechanical tests. The prismatic slip has been studied in greater detail: tensile tests have been performed on specimens carefully oriented at different temperatures, strain rates and with varying orientations of the basal and of the prism planes. Tests have also been made in the micro-strain range; the slip lines and the dislocation arrangements were observed in detail. The very unusual variation of the elastic limit with temperature is not due to impurities but to a cross slip mechanism. A model of dislocation locking is proposed to account for the experimental results. This mechanism assumes that the a-bar dislocations may also dissociate on the prism planes [101-bar 0]. Various possible dissociations are suggested, the most probable of which corresponds to the phase transformation: Hexagonal close packed to body centered cubic. This proposal can be extended to account for the relative ease of glide on the different systems in the hexagonal close packed metals. (author) [French] L' ecoulement de monocristaux de berylliurn deformes en glissement basal et en glissement prismatique a ete etudie sur des echantillons orientes de maniere a favoriser au maximum la deformation suivant une seule direction d'un seul systeme de glissement. L'influence de la temperature sur la limite elastique et la consolidation en glissement basal a ete etudie depuis -195 deg. C jusqu' 400 deg. C sur des echantillons deformes en tension et sur d'autres deformes en compression. Ces essais mecaniques ont ete completes par l'observation des lignes de

  14. Concilier des performances pour une agriculture durable - L'agriculture biologique comme prototype.

    OpenAIRE

    Sautereau, Natacha; Penvern, Servane; Petitgenet, Morgane; Fauriel, Joël; Bellon, Stéphane

    2011-01-01

    L'agriculture biologique est de plus en plus reconnue comme prototype d’agriculture durable car elle combine de multiples performances. Toutefois des tensions apparaissent entre certaines de ces performances. Une équipe de l’unité Écodéveloppement d’Avignon explore ces tensions en l'arboriculture fruitière.

  15. Émissions azotées au champ et performances des machines lors de l'épandage de boues issues du traitement des eaux usées

    OpenAIRE

    Pradel, M.; Pacaud, T.; Cariolle, M.

    2011-01-01

    / Ce document est un rapport de synthèse des travaux réalisés dans le cadre du projet Ecodefi sur l'estimation des émissions azotées lors de l'épandage de boues issues du traitement des eaux usées en lien avec les performances technologiques des machines utilisées à cet effet.

  16. Impact of the Heat Transfer on the Performance Calculations of Automotive Turbocharger Compressor Influence des transferts thermiques sur le calcul des performances des compresseurs de suralimentation

    Directory of Open Access Journals (Sweden)

    Chesse P.

    2011-09-01

    Full Text Available Usually, turbochargers used within internal combustion engine simulation software are modelled in an adiabatic manner. However, during our experimental tests we found that this is not necessarily the case. The direct use of the manufacturer’s map is not possible anymore. A simple method which considers the heat transfers is proposed. It is based on experimental tests made on hot air supplied turbocharger test bench. The difference with the adiabatic model is considerable mainly for low compressor power. This corresponds to internal combustion engine low loads. En général, les turbocompresseurs pris en compte dans les logiciels de simulation moteur sont modélisés de façon adiabatique. Cependant, les tests expérimentaux effectués au laboratoire montrent que ce n’est pas toujours le cas. L’utilisation directe des champs de fonctionnement fournis par les constructeurs de turbomachines n’est alors plus possible. Une évaluation quantitative de ces transferts, basée sur des tests réalisés sur un banc d’essais turbo à air chaud, est présentée. Puis ils sont pris en compte afin de calculer les caractéristiques réelles de fonctionnement d’un compresseur. La différence avec le modèle adiabatique apparaît très importante pour les faibles puissances compresseur. Ceci correspond aux faibles charges moteur.

  17. DEFINITION, MESURE ET PILOTAGE DE LA PERFORMANCE CLIENT-FOURNISSEUR : DES FREINS AU « PARTENARIAT INTERNE » ENTRE ACHETEURS ET OPERATIONNELS ?

    OpenAIRE

    Sebti , Hicham

    2015-01-01

    International audience; Le présent article s’intéresse à la manière dont s’organisent les liens entre les acheteurs et les clients internes autour de la définition, des leviers et des dispositifs de pilotage de la performance client-fournisseur. Nous interrogeons la diversité des représentations de la performance, des activités pour la réaliser et des usages des dispositifs de gestion qui servent de fondement aux interprétations de ce qui est performant et orientent les comportements. Nous so...

  18. Performances de production des cobayes (Cavia porcellus L.) en ...

    African Journals Online (AJOL)

    Production performance of guinea pigs (Cavia porcellus L.) in function of dietary protein level. ABSTRACT. In Cameroon, guinea pigs raising is still practiced in kitchens and on the ground and their food is ... females were previously crossed with 12 males for a period of 31 days according to a factorial design of three.

  19. La formation des cadres sportifs et les performances sportives au ...

    African Journals Online (AJOL)

    It is the problematic of our survey that sets for objective to give account of the loss of the human capital that our sporting professionals constitute because of their inadequate use by the nation. To drive our survey, we formulated the following hypothesis: the sporting performances in Benin reveal there is no link between the ...

  20. Etude par simulation hil des performances d'un statcom pour la ...

    African Journals Online (AJOL)

    Ce travail présente l'étude par simulation Hardware In the Loop (HIL) des performances d'un STATCOM pour la stabilisation de la tension délivrée par une génératrice asynchrone triphasée auto excitée dans un réseau autonome. Nous avons combiné l'utilisation du logiciel de simulation LABVIEW et la carte ARDUINO ...

  1. Education scolaire, performance et equite sociale: des relations problematiques

    Directory of Open Access Journals (Sweden)

    Yves Lenoir

    2012-01-01

    Full Text Available Using critical theory, this paper first confronts critically the relationship between education and performance in light of globalisation and its underlying neo‑‑ liberal ideology. This comparison reveals that there is a definite compatibility between them, but it is fully slanted towards efficiency logic and human capital production. Then, adopting a critical attitude, the paper questions this direction, in the name of the emancipation and citizenship prospects, which brought the school system reorganisation by democratic nation‑‑ states. The current choices have distorted these objectives and have redirected them towards utilitarian learnings and an increasingly therapeutic socialisation. Finally, the paper stresses the inseparability between the performance issue, the social equity issue and the education/teaching effectiveness issue in order to highlight the need for taking into account qualitative dimensions, which stem from the background and the pupils, so as to focus much more on learning processes, rather than on learning outcomes themselves.

  2. Habiletes manageriales et de leadership et la performance des ...

    African Journals Online (AJOL)

    Mais une série d'interrogations a meublé les discussions parmi lesquelles : existe-t-il une différence entre le management et le leadership ? Peut-on être un manager et leader ? Les managers leaders sont-ils plus performants ? A-t-on besoin de ces concepts en santé ? Autant de questionnements qui ont conduit à la ...

  3. EPIDEMIOLOGICAL INVESTIGATIONS OF A PESTE DES PETITS RUMINANTS (PPR OUTBREAK IN AFGHAN SHEEP IN PAKISTAN

    Directory of Open Access Journals (Sweden)

    A. B. ZAHUR, A. ULLAH, H. IRSHAD, M. S. FAROOQ, M. HUSSAIN AND M. JAHANGIR

    2009-10-01

    Full Text Available Epidemiological and virological investigations were carried out during an outbreak of Peste des petits ruminants (PPR in Afghan (Bulkhi sheep in Pakistan. The overall morbidity, mortality and case fatality rates were 41.0, 1.2 and 3.0%, respectively. The epidemic curve was plotted and the values for basic reproductive number (R0 and herd immunity threshold (HIT for the affected flock were estimated to be 6.85 and 85.4%, respectively. The morbid material analysis by immuno-capture ELISA (Ic-ELISA and haemagglutination assay (HA revealed the presence of PPR virus. The PPR virus was isolated and identified through cytopathic effects, Ic-ELISA and transmission electron microscopy (TEM.

  4. Tensions et coordinations entre les acteurs des sciences de la performance sportive

    Directory of Open Access Journals (Sweden)

    Matthieu Delalandre

    2012-01-01

    Full Text Available Cet article part d’une étude qui questionne les conditions de production des savoirs scientifiques sur la performance sportive, en portant le regard sur les modes de coordination entre les chercheurs et les entraîneurs avec qui ils collaborent. L’analyse d’un matériau empirique constitué d’entretiens et d’un corpus écrit nous a conduit à mettre en évidence trois régimes de scientificité, qui constituent à la fois des modes de coordination des chercheurs et des entraîneurs et des formes particulières de production des savoirs. L’article met en lumière des tensions inhérentes à chacun de ces régimes et les solutions adoptées par les acteurs pour coopérer. Nous nous intéressons enfin aux contraintes que les chercheurs rencontrent pour passer d’un régime à l’autre.Tensions and coordinations between the actors of sports performance sciencesThis article is based on a study which examines how knowledge is produced in the field of sports performance, looking at the modes of coordination between researchers and the coaches with whom they collaborate. The analysis of empirical data made of interviews and texts leads us to show three scientific regimes, which are at the same time specific modes of coordination between scientists and coaches and particular forms of knowledge production. The paper sheds light on the tensions inherent in each regime and the solutions which the actors adopt in order to co-operate. Finally, we study the constraints scientists face when they go from one regime to another.Tensiones y coordinaciones entre los integrantes de las ciencias de la performance deportivaEste trabajo estudia las condiciones de producción del conocimiento científico respecto a la performance deportiva, destacando el modo de coordinación y colaboración entre investigadores y entrenadores. El análisis de un material empírico está constituido por entrevistas y por un corpus escrito que nos ha conducido a determinar

  5. Timing Constraints Based High Performance Des Design And Implementation On 28nm FPGA

    DEFF Research Database (Denmark)

    Thind, Vandana; Pandey, Sujeet; Hussain, Dil muhammed Akbar

    2018-01-01

    in this work, we are going to implement DES Algorithm on 28nm Artix-7 FPGA. To achieve high performance design goal, we are using minimum period, maximum frequency, minimum low pulse, minimum high pulse for different cases of worst case slack, maximum delay, setup time, hold time and data skew path....... The cases on which analysis is done are like worst case slack, best case achievable, timing error and timing score, which help in differentiating the amount of timing constraint at two different frequencies. We analyzed that in timing analysis there is maximum of 19.56% of variation in worst case slack, 0...

  6. Amélioration des performances environnementales des pratiques viticoles et analyse des risques pour la qualité du raisin : étape vers l’écoqualiconception©

    Directory of Open Access Journals (Sweden)

    Beauchet Sandra

    2017-01-01

    Full Text Available L’évolution des itinéraires techniques viticoles (ITKv vers un plus grand respect de l’environnement passe par une évaluation de leurs performances environnementales. Dans un contexte de gestion durable, plusieurs autres facteurs sont à prendre en compte, notamment le risque de modification de la qualité des raisins issus de ces ITKv. Les résultats d’évaluation environnementale par la méthode d’Analyse du Cycle de Vie (ACV ainsi que l’évaluation de la qualité du raisin s’appuient sur beaucoup données. Ce travail montre l’intérêt d’une méthode d’évaluation multicritère conjointe « environnement et qualité », dans le processus de changement de pratiques pour une amélioration des performances. Les résultats obtenus sur 5 ITKv montrent des différences de notes entre les 2 millésimes étudiés et des pratiques ont été identifiées pour leurs forts impacts sur les résultats ACV. Des propositions théoriques de changement de pratiques sont testées sur l’un des ITKv. Ces propositions améliorent les notes environnementales finales de +0,15 points à +0,77 points (/10 quand elles sont mises en œuvre séparément et +2,29 points (/10 en étant combinées. Un modèle explicatif de la qualité du raisin permet de vérifier que les nouvelles pratiques ne peuvent potentiellement pas altérer la qualité du raisin. La méthode d’évaluation conjointe CONTRA-QUALENVIC adaptée à la viticulture montre ici qu’elle peut être une aide à l’amélioration des ITKv.

  7. Microcrédits et performances financière et sociale des institutions de microfinance au Cameroun

    Directory of Open Access Journals (Sweden)

    Serge Messomo Ellé

    2017-09-01

    Full Text Available L’objectif de ce travail a été de déterminer les types de microcrédits qui expliquent les performances financière et sociale des institutions de microfinance au Cameroun (IMFs. Parmi les IMFs, 159 ont été analysées par le biais des statistiques descriptives et des équations de régression linéaire multiple. Les résultats obtenus montrent que les types d’activités financées expliquent faiblement les performances financière et sociale des IMFs au Cameroun. Par contre, les types de microcrédits accordés ont une forte emprise sur la viabilité financière et sociale de ces IMFs. Les implications managériales de ces résultats suggèrent aux IMFs d’accroître leurs performances financière et sociale au plan des types d’activités financées.

  8. Investigating the functional neuroanatomy of concrete and abstract word processing through direct electric stimulation (DES) during awake surgery.

    Science.gov (United States)

    Orena, E F; Caldiroli, D; Acerbi, F; Barazzetta, I; Papagno, C

    2018-06-05

    Neuropsychological, neuroimaging and electrophysiological studies demonstrate that abstract and concrete word processing relies not only on the activity of a common bilateral network but also on dedicated networks. The neuropsychological literature has shown that a selective sparing of abstract relative to concrete words can be documented in lesions of the left anterior temporal regions. We investigated concrete and abstract word processing in 10 patients undergoing direct electrical stimulation (DES) for brain mapping during awake surgery in the left hemisphere. A lexical decision and a concreteness judgment task were added to the neuropsychological assessment during intra-operative monitoring. On the concreteness judgment, DES delivered over the inferior frontal gyrus significantly decreased abstract word accuracy while accuracy for concrete words decreased when the anterior temporal cortex was stimulated. These results are consistent with a lexical-semantic model that distinguishes between concrete and abstract words related to different neural substrates in the left hemisphere.

  9. Amélioration continue des performances sur chantier par optimisation des zones de stockage et d’approvisionnement

    OpenAIRE

    de Hemptinne, Antoine; Lassaux, Raphaël

    2017-01-01

    L’industrie de la construction est un moteur important de l’économie belge. Elle emploie des milliers de personnes à travers le pays et la nette croissance enregistrée pour l’année 2016 nous donne un aperçu de la bonne santé de ce secteur. Les récents résultats à court terme nous font cependant parfois oublier un constat moins réjouissant et valable depuis 20 ans : le secteur de la construction sou re d’un important retard en terme de productivité comparé aux autres branches du se...

  10. Simulation and experimental validation of the performance of a absorption refrigerator; Simulation und experimentelle Validierung des Betriebsverhaltens einer Absorptionskaeltemaschine

    Energy Technology Data Exchange (ETDEWEB)

    Olbricht, Michael; Luke, Andrea [Kassel Univ. (Germany). Fachgebiet Technische Thermodynamik

    2015-07-01

    The two biggest obstacles to a stronger market penetration of absorption refrigerators are their high cost and the size of the apparatus, which are due to the inaccurate methods for plant design. In order to contribute to an improved design a thermodynamic model is presented to describe the performance of a absorption refrigerator with the working fluid water/lithium. In this model, the processes are displayed in the single apparatus and coupled to each other in the systemic context. Thereby the interactions between the apparatus can specifically investigated and thus the process limiting component can be identified under the respective conditions. A validation of the simulation model and the boundary conditions used is done based on experimental data operating a self-developed absorption refrigerator. In the simulation, the heat transfer surfaces in accordance with the real system can be specified. The heat transport is taken into account based on typical values for the heat transfer in the individual apparatuses. Simulation results show good agreement with the experimental data. The physical relationships and influences externally defined operating parameters are correctly reproduced. Due to the chosen low heat transfer coefficient, the calculated cooling capacities by the model are below the experimentally measured. Finally, the possibilities and limitations are discussed by using the model and further improvement possibilities are suggested. [German] Die beiden groessten Hemmnisse fuer eine staerkere Marktdurchdringung von Absorptionskaeltemaschinen (AKM) sind deren hohe Anschaffungskosten sowie die Baugroesse der Apparate, die durch die ungenauen Methoden zur Anlagenauslegung begruendet sind. Als Beitrag fuer eine verbesserte Auslegung wird ein thermodynamisches Modell zur Beschreibung des Betriebsverhaltens einer AKM mit dem Arbeitsstoffpaar Wasser/Lithiumbromid vorgestellt. In diesem werden die Prozesse in den Einzelapparaten abgebildet und im systemischen

  11. 173 Étude des performances épuratoires de la technique du ...

    African Journals Online (AJOL)

    Afrique Sciences

    à la station d'épuration de la ville d'Errachidia - Maroc. Chaouki HAMID1*, Lahcen ELWATIK1, Youssef RAMCHOUN2, Rachid FATH-ALLAH3,. Abdelrhafour AYYACH3, Zhor FATHALLAH4, Azzeddine EL MIDAOUI3 et El Mahdi HBAIZ5. 1Equipe des substances naturelles, synthèse et dynamique moléculaire, Faculté des ...

  12. Performance of refrigerating machineries with new refrigerants; Performance des machines frigorifiques avec les nouveaux refrigerants

    Energy Technology Data Exchange (ETDEWEB)

    Bailly, A; Jurkowski, R [CIAT, 01 - Culoz (France)

    1998-12-31

    This paper reports on a comparative study of the thermal performances of different refrigerants like R-22, R-134a, R-404A and R-407C when used as possible substitutes for the HCFC22 refrigerant in a given refrigerating machinery equipped with compact high performance plate exchangers. Thermal performances are compared in identical operating conditions. The behaviour of the two-phase exchange coefficient is analyzed with respect to the different parameters. The composition of the mixture after one year of operation has been analyzed too and the influence of oil on the performances is studied. (J.S.)

  13. Performance of refrigerating machineries with new refrigerants; Performance des machines frigorifiques avec les nouveaux refrigerants

    Energy Technology Data Exchange (ETDEWEB)

    Bailly, A.; Jurkowski, R. [CIAT, 01 - Culoz (France)

    1997-12-31

    This paper reports on a comparative study of the thermal performances of different refrigerants like R-22, R-134a, R-404A and R-407C when used as possible substitutes for the HCFC22 refrigerant in a given refrigerating machinery equipped with compact high performance plate exchangers. Thermal performances are compared in identical operating conditions. The behaviour of the two-phase exchange coefficient is analyzed with respect to the different parameters. The composition of the mixture after one year of operation has been analyzed too and the influence of oil on the performances is studied. (J.S.)

  14. Some ways for the investigation of the solar modulation of cosmic electrons; Moyens d'etude de la modulation solaire des electrons cosmiques

    Energy Technology Data Exchange (ETDEWEB)

    Mercier, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    In this report, we are investigating the solar modulation of cosmic electrons, in different ways. By comparing the calculated intensity with the measured intensity of positrons, we can evaluate the solar modulation of positrons, hence the modulation of negatons, since the modulation of negatons is probably the same that for positrons. By comparing the electron spectrum in interstellar space needed to explain the galactic background radio emission with that observed near the earth, we can deduce information about the modulation of electrons. We can investigate the modulation through the observation of its variations during the solar cycle. This different ways lead us to compatible results. In spite of the fact that the precision of the experimental data is poor, the modulation can be represented by: a constant or a form in exp(- K/Ro{beta}) under the rigidity Ro {approx_equal} 0,5 BV; a form in exp(- K/R) or exp(- K/R{beta}) above this rigidity. In addition, the investigation of both electrons and protons displays that the diffusion-convection theory is inadequate to explain all the features of the solar modulation. (author) [French] Dans le present rapport, nous etudions la modulation solaire des electrons cosmiques a l'aide de plusieurs methodes. Par comparaison entre l'intensite calculee et l'intensite mesuree des positons, on peut evaluer la modulation solaire des positons, et aussi des negatons, puisque la modulation des negatons est probablement la meme que celle des positons. Par le calcul, a partir du bruit de fond radio, du flux des electrons a l'exterieur du systeme solaire et sa confrontation avec le flux observe a l'orbite de la Terre permet l'etude de la modulation solaire des electrons. On peut aussi analyser ce phenomene de modulation pour l'etude de ses variations au cours du cycle solaire. Ces diverses methodes donnent des resultats compatibles. En depit de la precision mediocre des donnees experimentales, on peut caracteriser la modulation par: une

  15. Performance de deux techniques d'extraction des phénols ...

    African Journals Online (AJOL)

    Influence in vitro des composes phénoliques des jeunes feuilles du pécher. Prunus persica (1) Batsch, sur le puceron vert du pecher, Myzus persicae sulzer. Agronomie 8 (9) : 787-792. Bell J.N., Dixon R.A., Bailey J.A., Rowell P.M. &. Lamb C.J., 1984. Differential induction of chalcone synthase mRNA activity at the onset.

  16. Performances des équipements utilisés en liaison froide en liaison froide en restauration hospitalière - Suivi des températures des entrées froides

    OpenAIRE

    Rosset , Philippe; Morelli , Elisabeth; Noël , Véronique; Poumeyrol , Gérard

    2007-01-01

    La restauration hospitalière présente un système de distribution des repas qui lui est spécifique : assemblage des denrées préparées et constitution des plateaux-repas dans un local dédié (dit d'allotissement) ; transport des plateaux-repas vers les unités de soins dans des enceintes mobiles permettant le maintien au froid des denrées consommées froides et la remise en température des aliments à consommer chauds. La présente étude concerne le suivi des températures de hors-d'œuvre dans trois ...

  17. Safety investigation of team performance in accidents

    International Nuclear Information System (INIS)

    Petkov, G.; Todorov, V.; Takov, T.; Petrov, V.; Stoychev, K.; Vladimirov, V.; Chukov, I.

    2004-01-01

    The paper presents the capacities of the performance evaluation of teamwork (PET) method. Its practicability and efficiency are illustrated by retrospective human reliability analyse of the famous nuclear and maritime accidents. A quantitative assessment of operators' performance on the base of thermo-hydraulic (T/H) calculations and full-scope simulator data for set of NPP design basic accidents with WWER is demonstrated. The last data are obtained on the 'WWER-1000' full-scope simulator of Kozloduy NPP during the regular practical training of the operators' teams. An outlook on the 'evaluation system of main control room (MCR) operators' reliability' project, based on simulator data of operators' training is given

  18. Application of mathematical methods to the investigation of uranium deposits; Application des methodes mathematiques a l'etude des gisements d'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Formery, P; Ziegler, V [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    It may be considered approximately that grades, widths and accumulations (grade-width products), in french uranium deposits are distributed according to a lognormal law. This property associated to KRIGE'S and de WIGE'S formulae make a powerful tool in ore deposits surveys. The correlation between radioactivities and grades is realized, in logarithmic coordinates, through a straight line the properties of which are analysed in the paper. MATHERON'S recent works, in association with data of classical statistics and the above mentioned formulae make possible to complete the ore reserves evaluation by computing the accuracy. Statistical methods applied to ore deposits have given birth to a parameter which is as important as the mean grade for characterisation of deposits: the absolute dispersion. (author) [French] On peut considerer en premiere approximation que les teneurs, les puissances et les accumulations se distribuent dans les gisements fran is d'uranium suivant une loi log normale. Cette propriete, associee aux hypotheses de De WIGE et de KRIGE, constitue un puissant instrument d'etude des gisements. La correspondance des radioactivites et des teneurs s'effectue, en coordonnees bilogarithmiques, par une droite dont on etudie les proprietes. Grace aux travaux recents de MATHERON, associes aux donnees de la statistique classique ainsi qu'aux hypotheses enumerees plus haut, il est possible de completer le calcul des reserves d'un gisement par une evaluation de l'erreur commise. Les methodes statistiques ont fait apparaitre un parametre aussi important pour caracteriser un gisement, que la teneur moyenne: la dispersion absolue. (auteur)

  19. Development of the NRC's Human Performance Investigation Process (HPIP)

    International Nuclear Information System (INIS)

    Paradies, M.; Unger, L.; Haas, P.; Terranova, M.

    1993-10-01

    The three volumes of this report detail a standard investigation process for use by US Nuclear Regulatory Commission (NRC) personnel when investigating human performance related events at nuclear power plants. The process, called the Human Performance Investigation Process (HPIP), was developed to meet the special needs of NRC personnel, especially NRC resident and regional inspectors. HPIP is a systematic investigation process combining current procedures and field practices, expert experience, NRC human performance research, and applicable investigation techniques. The process is easy to learn and helps NRC personnel perform better field investigations of the root causes of human performance problems. The human performance data gathered through such investigations provides a better understanding of the human performance issues that cause event at nuclear power plants. This document, Volume II, is a field manual for use by investigators when performing event investigations. Volume II includes the HPIP Procedure, the HPIP Modules, and Appendices that provide extensive documentation of each investigation technique

  20. Building Investigation: Material or Structural Performance

    Directory of Open Access Journals (Sweden)

    Yusof M.Z.

    2014-03-01

    Full Text Available Structures such as roof trusses will not suddenly collapse without ample warning such as significant deflection, tilting etc. if the designer manages to avoid the cause of structural failure at the material level and the structural level. This paper outlines some principles and procedures of PDCA circle and QC tools which can show some clues of structural problems in terms of material or structural performance

  1. L'EVOLUTION DU DESIGN DES SYSTEMES DE PILOTAGE DE LA PERFORMANCE DANS LES HOPITAUX : UNE QUETE PERMANENTE DE L'EFFICIENCE ORGANISATIONNELLE

    OpenAIRE

    Rouhana , Rima; Van Caillie , Didier

    2008-01-01

    International audience; Notre communication vise (1) à dresser un historique de l'évolution du design des systèmes de contrôle de gestion (CDG) et, essentiellement, des systèmes de pilotage de la performance (SPP) en contexte hospitalier; (2) à en inférer, dans une perspective contingente, la nature de ses principaux facteurs contingents; et (3) à synthétiser l'ensemble dans un modèle contingent conceptuel permettant de comprendre comment le système de contrôle de gestion des institutions hos...

  2. Investigation of PMU performance under TVE criterion

    DEFF Research Database (Denmark)

    Yang, GuangYa; Martin, K. E.; Østergaard, Jacob

    2010-01-01

    Phasor measurement unit (PMU) is an emerging measurement technology for power grids which enables the synchronised high speed measurement with precise time stamps for accurate system comparison over a wide geographic area. PMU measurement quality is the key issue in application purposes....... To evaluate the measurement quality, the concepts of total vector error (TVE) and benchmark tests, including the magnitude, phase and frequency step tests, are proposed in the C37.118 standard. It also includes requirements for test results. This paper reports the results of tests performed on several PMUs....... These tests include both steady state and dynamic conditions conforming to the new requirements under development by the IEEE for the updated C37.118 standard. In addition to validating the new IEEE requirements with actual PMU measurements, the results evaluated by TVE are discussed and with errors analyzed...

  3. Development of the NRC's Human Performance Investigation Process (HPIP)

    International Nuclear Information System (INIS)

    Paradies, M.; Unger, L.; Haas, P.; Terranova, M.

    1993-10-01

    The three volumes of this report detail a standard investigation process for use by US Nuclear Regulatory Commission (NRC) personnel when investigating human performance related events at nuclear power plants. The process, called the Human Performance Investigation Process (HPIP), was developed to meet the special needs of NRC personnel, especially NRC resident and regional inspectors. HPIP is a systematic investigation process combining current procedures and field practices, expert experience, NRC human performance research, and applicable investigation techniques. The process is easy to learn and helps NRC personnel perform better field investigations of the root causes of human performance problems. The human performance data gathered through such investigations provides a better understanding of the human performance issues that cause events at nuclear power plants. This document, Volume I is a concise description of the need for the human performance investigation process, the process' components, the methods used to develop the process, the methods proposed to test the process, and conclusions on the process' usefulness

  4. Investigating the performance and properties of dielectric elastomer actuators as a potential means to actuate origami structures

    International Nuclear Information System (INIS)

    Ahmed, S; Ounaies, Z; Frecker, M

    2014-01-01

    Origami engineering aims to combine origami principles with advanced materials to yield active origami shapes, which fold and unfold in response to external stimuli. This paper explores the potential and limitations of dielectric elastomers (DEs) as the enabling material in active origami engineering. DEs are compliant materials in which the coupled electro-mechanical actuation takes advantage of their low modulus and high breakdown strength. Until recently, prestraining of relatively thick DE materials was necessary in order to achieve the high electric fields needed to trigger electrostatic actuation without inducing a dielectric breakdown. Although prestrain improves the breakdown strength of the DE films and reduces the voltage required for actuation, the need for a solid frame to retain the prestrain state is a limitation for the practical implementation of DEs, especially for active origami structures. However, the recent availability of thinner DE materials (50 μm, 130 μm, 260 μm) has made DEs a likely medium for active origami. In this work, the folding and unfolding of DE multilayered structures, along with the realization of origami-inspired 3D shapes, are explored. In addition, an exhaustive study on the fundamentals of DE actuation is done by directly investigating the thickness actuation mechanism and comparing their performance using different electrode types. Finally, changes in dielectric permittivity as a function of strain, electrode type and applied electric field are assessed and analyzed. These fundamental studies are key to obtaining more dramatic folding and to realizing active origami structures using DE materials. (paper)

  5. La gestion par affaire et pilotage de la performance des organisations industrielles

    OpenAIRE

    Pendariees, Michel

    2006-01-01

    International audience; « Dans les systèmes industriels où les produits sont conçus et réalisés en fonction des spécifications des clients, la notion d'affaire est l'entité de base de la gestion industrielle » . Aujourd'hui, la recherche de solutions globales « sur mesure », prime sur la fourniture d'un catalogue de « belles solutions », comme réponse au client. Pour être performante, l'entreprise industrielle doit s'organiser par « affaire ». Ce qui lui permet de mieux s'adapter et maîtriser...

  6. Service public local des déchets ménagers. A la recherche d'indicateurs de performance.

    Directory of Open Access Journals (Sweden)

    Gérard Bertolini

    2008-03-01

    Full Text Available Comme les autres services publics, celui relatif à la gestion locale des déchets ménagers a besoin d’évaluer ses performances et doit en rendre compte. L’évaluation en question passe par la définition de critères et la sélection d’indicateurs, qui permettent de mesurer les progrès d’une collectivité et d’établir des comparaisons entre collectivités. La performance comporte de multiples facettes, qui appellent une évaluation multicritères. A la lumière d’une analyse de faisabilité et de pertinence, l’article propose un système d’indicateurs peu nombreux et assez simples constituant un tableau de bord.As other public services, the municipal waste service needs to evaluate its performances and is accountable for its results. This evaluation requires the definition of criteria and the selection of indicators in order to measure the  progress and to allow comparisons with other municipal waste services too. Because the performance has many facets, a multi-criteria approach will be used. In the light of an analysis of feasibility and relevance, the paper puts forwards few, quite simple and complementary indicators which are gathered up into a synoptic table and make up an instrument panel.

  7. Evaluation de la performance des TRC et des solutions hybrides dans le cadre de la réparation et le renforcement de poutres en béton armé

    OpenAIRE

    SI LARBI, A.; HAMELIN, P.; CONTAMINE, R.

    2011-01-01

    Le présent travail, à caractère exploratoire, vise à mettre en évidence l’intérêt de solutions alternatives au carbone-époxy dans le cadre de la réparation de structures en béton armé vis-à-vis de la flexion par l’emploi de matériaux composites de type textile mortier(TRC). Il a permis de mettre en avant les bonnes dispositions des solutions hybrides que ce soit en termes de comportement ultime ou de comportement en service avec des niveaux de performances très comparables aux ...

  8. Restauration fonctionnelle du rachis : effet du niveau initial de douleur sur les performances des sujets lombalgiques chroniques

    Science.gov (United States)

    Caby, Isabelle; Olivier, N; Mendelek, F; Kheir, R Bou; Vanvelcenaher, J; Pelayo, P

    2014-01-01

    HISTORIQUE : La lombalgie chronique est une douleur lombaire persistante d’origine multifactorielle. Le niveau de douleur initial reste faiblement utilisé pour analyser et comparer les réponses des patients lombalgiques au programme de reconditionnement. OBJECTIFS : Apprécier et évaluer les réponses des sujets lombalgiques chroniques très douloureux à une prise en charge dynamique et intensive. MÉTHODOLOGIE : 144 sujets atteints de lombalgie chronique ont été inclus dans un programme de restauration fonctionnelle du rachis de 5 semaines. Les sujets ont été classés en deux groupes de niveau de douleur: un groupe atteint de douleur sévère (n = 28) et un groupe atteint de douleur légère à modérée (n = 106). L’ensemble des sujets ont bénéficié d’une prise en charge identique comprenant principalement de la kinésithérapie, de l’ergothérapie, du reconditionnement musculaire et cardio-vasculaire ainsi qu’un suivi psychologique. Les paramètres physiques (flexibilité, force musculaire) et psychologiques (qualité de vie) ont été mesurés avant (T0) et après le programme (T5sem). RÉSULTATS : L’ensemble des performances physiques et fonctionnelles des sujets très douloureux sont moins bonnes et le retentissement de la lombalgie sur la qualité de vie, pour ces mêmes sujets, est majoré à T0. Toutes les différences significatives constatées à T0 entre les deux groupes s’effacent à T5sem. CONCLUSIONS : Les sujets lombalgiques chroniques très douloureux répondent favorablement au programme dynamique et intensif. L’intensité douloureuse de la lombalgie n’aurait pas d’effet sur les réponses au programme. La restauration fonctionnelle du rachis apporterait aux sujets la possibilité de mieux gérer leur douleur quel que soit son niveau. PMID:25299476

  9. The Performance of Enchantment and the Enchantment of Performance in Malay Singapore La performance de l’enchantement et l’enchantement de la performance des Malais de Singapour

    Directory of Open Access Journals (Sweden)

    D. S. Farrer

    2012-11-01

    Full Text Available From the 1960s the Malays of Singapore were mandated to relocate from kampung (village locations to “modern” concrete housing blocks. Their former villages, consisting of wooden houses built on stilts, were razed for concrete social housing, accompanied by a policy enforcing a rigorous ethnic quota “representative” of the multi-ethnic composition of Singapore. The mandatory “relocation” of the populace was packaged by the local state/media in social evolutionary terms as “progress.” Nowadays, people descended from the villages periodically reconvene at Malay weddings held across the Island. The weddings occur under the giant concrete housing blocks, utilizing the same space where Chinese funerals lay their dead. Wedding silat, a Malay martial art danced at weddings, is a rite of aggregation to welcome new family members, and acknowledge the realignment of wider kinship structures. The performance of wedding silat illuminates performance in relation to traditional and modern power structures. Given the colossal rationalization of Singapore, the physical extinction of the kampung, the Islamization of the Malays, and the general malaise of nostalgic disenchantment with the present, the performance of silat empowers Malays to re-enchant their world. In the process, to secure, preserve, and manufacture Malay identity, ritual performances reunite the scattered minority community in a reconstituted space, a virtual kampung.à partir des années 1960, les Malais de Singapour ont été mis dans l’obligation de se reloger de leurs villages traditionnels (kampung dans des constructions « modernes » en béton. Leurs villages d’origine – faits de maisons en bois sur pilotis – ont été rasés pour être remplacés par des logements sociaux en dur, le tout accompagné d’une politique rigoureuse de quotas représentatifs de la composition multi-ethnique de Singapour. Cette réinstallation forcée a été présentée en termes de

  10. Development of the NRC's Human Performance Investigation Process (HPIP)

    International Nuclear Information System (INIS)

    Paradies, M.; Unger, L.; Haas, P.; Terranova, M.

    1993-10-01

    The three volumes of this report detail a standard investigation process for use by US Nuclear Regulatory Commission (NRC) personnel when investigating human performance related events at nuclear power plants. The process, called the Human Performance Investigation Process (HPIP), was developed to meet the special needs of NRC personnel, especially NRC resident and regional inspectors. HPIP is a systematic investigation process combining current procedures and field practices, expert experience, NRC human performance research, and applicable investigation techniques. The process is easy to learn and helps NRC personnel perform better field investigations of the root causes of human performance problems. The human performance data gathered through such investigations provides a better understanding of the human performance issues that cause events at nuclear power plants. This document, Volume III, is a detailed documentation of the development effort and the pilot training program

  11. Les déterminants internes qui évaluent la performance des banques islamiques : cas de la zone de Moyen Orient et Afrique du Nord

    Directory of Open Access Journals (Sweden)

    Hayet Dami

    2017-09-01

    Full Text Available Le but de cette recherche est d’étudier les déterminants internes qui évaluent la performance des 22 banques islamiques cotées en Bourse et ils ont appliqué la même norme comptable internationale dans la zone de Moyen Orient et Afrique du Nord en utilisant une analyse des indicateurs financiers tels que la rentabilité, la liquidité, la solvabilité et le risque de crédit, l’adéquation du capital, l’efficacité opérationnelle et l’efficacité d’allocation des ressources. Nous avons utilisé un modèle MCO avec une régression linéaire multiple comprenant de la variable dépendante (ROA ou ROE et de nombreuses variables indépendantes selon les données du panel. Les résultats empiriques indiquent que la liquidité, l’adéquation du capital, l’efficacité opérationnelle et l’efficacité d’allocation des ressources sont des déterminants significatifs dans notre étude. Par contre, les indicateurs de risque du crédit et la solvabilité ne sont pas significatifs pour évaluer la performance des banques islamiques au Moyen Orient et Afrique du Nord. Notre résultat est robust.

  12. Des Connaissances Aux Politiques

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les synergies ont été mises en commun au fur et à mesure des progrès de la recherche. .... Recherche normative (sur le rôle et la performance des institutions .... Système national d'information sur la gestion environnementale connecté à 19 ...... Un fort contrôle centralisé sur l'élaboration des politiques nationales peut ...

  13. Reconnaissance de caractères : évaluation des performances

    OpenAIRE

    Belaïd , Abdel; Cecotti , Hubert

    2006-01-01

    National audience; La numérisation de documents est une étape importante dans la mise en place d'un système de gestion électronique de documents (GED). Le choix de la solution de numérisation doit prendre en compte toutes les étapes de traitement des documents depuis l'acquisition, la conversion du contenu (texte et structure) jusqu'à la correction et la mise en exploitation du document final. Le but de cette numérisation est une utilisation du contenu converti, par exemple pour effectuer une...

  14. Performers and performance : how to investigate the contribution of the operational network to operational performance

    NARCIS (Netherlands)

    Wijngaard, J.; Vries, J. de; Nauta, A.

    2006-01-01

    Purpose This paper seeks to explore the question of how to investigate the contribution of the operational network (comprising sales service, logistics, planning, production, etc.) to operational performance. In doing so, the paper aims to link concepts from organisational and social psychology to

  15. Performers and performance : How to investigate the contribution of the operational network to operational performance

    NARCIS (Netherlands)

    Wijngaard, J.; de Vries, J.; Nauta, Aukje

    2006-01-01

    Purpose - This paper seeks to explore the question of how to investigate the contribution of the operational network (comprising sales service, logistics, planning, production, etc.) to operational performance. In doing so, the paper aims to link concepts from organisational and social psychology to

  16. Impact de la preparation des anodes crues et des conditions de cuisson sur la fissuration dans des anodes denses

    Science.gov (United States)

    Amrani, Salah

    La fabrication de l'aluminium est realisee dans une cellule d'electrolyse, et cette operation utilise des anodes en carbone. L'evaluation de la qualite de ces anodes reste indispensable avant leur utilisation. La presence des fissures dans les anodes provoque une perturbation du procede l'electrolyse et une diminution de sa performance. Ce projet a ete entrepris pour determiner l'impact des differents parametres de procedes de fabrication des anodes sur la fissuration des anodes denses. Ces parametres incluent ceux de la fabrication des anodes crues, des proprietes des matieres premieres et de la cuisson. Une recherche bibliographique a ete effectuee sur tous les aspects de la fissuration des anodes en carbone pour compiler les travaux anterieurs. Une methodologie detaillee a ete mise au point pour faciliter le deroulement des travaux et atteindre les objectifs vises. La majorite de ce document est reservee pour la discussion des resultats obtenus au laboratoire de l'UQAC et au niveau industriel. Concernant les etudes realisees a l'UQAC, une partie des travaux experimentaux est reservee a la recherche des differents mecanismes de fissuration dans les anodes denses utilisees dans l'industrie d'aluminium. L'approche etait d'abord basee sur la caracterisation qualitative du mecanisme de la fissuration en surface et en profondeur. Puis, une caracterisation quantitative a ete realisee pour la determination de la distribution de la largeur de la fissure sur toute sa longueur, ainsi que le pourcentage de sa surface par rapport a la surface totale de l'echantillon. Cette etude a ete realisee par le biais de la technique d'analyse d'image utilisee pour caracteriser la fissuration d'un echantillon d'anode cuite. L'analyse surfacique et en profondeur de cet echantillon a permis de voir clairement la formation des fissures sur une grande partie de la surface analysee. L'autre partie des travaux est basee sur la caracterisation des defauts dans des echantillons d'anodes crues

  17. An investigation into the determinants of business performance in ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    An investigation into the determinants of business performance in Francophone Africa. High-performing businesses are currently seen as a source of job and ... IDRC congratulates first cohort of Women in Climate Change Science Fellows.

  18. Mathematical modelling of the performance of hydrodynamic couplings using hybrid models; Mathematische Modellierung des Betriebsverhaltens hydrodynamischer Kupplungen mit hybriden Modellansaetzen

    Energy Technology Data Exchange (ETDEWEB)

    Jaschke, P.

    2000-02-01

    Mathematical models of the dynamic performance of hydrodynamic couplings are developed using hybrid modelling, i.e. a combination of analytical physical modelling and black box identification. The models developed were verified by measurements on a model powertrain. [German] In dieser Arbeit werden mit Hilfe der hybriden Modellierung mathematische Modelle zur Beschreibung des dynamischen Betriebsverhaltens hydrodynamischer Kupplungen ermittelt. Die Hybride Modellierung stellt eine Kombination der analytisch physikalischen Modellierung und der Black-Box-Identifikation dar. Diese Modellierungsart ist ausgewaehlt worden, um die Vorteile der analytisch physikalischen Modellierung und der Black-Box-Identifikation hydrodynamischer Kupplungen zu verbinden und deren Nachteile gering zu halten. Auf dieser Basis ist eine Vorgehensweise vorgestellt worden, die die Ermittlung der Modelle mit wenig Aufwand ermoeglicht. Mit Hilfe der Modelltheorie wird gezeigt, wie die ermittelten mathematischen Modelle zur Simulation des dynamischen Betriebsverhaltens geometrisch aehnlicher Kupplungen unterschiedlicher Baugroessen verwendet werden koennen. Darueber hinaus wird dargelegt, wie die ermittelten Modelle mit Modellen anderer Antriebsstrangelemente gekoppelt werden koennen, um Antriebsstrangsimulationen zu ermoeglichen. Verifikationsmessungen an einem Modellantriebsstrang verdeutlichen die Guete und Verwendbarkeit der mathematischen Modelle. (orig.)

  19. Energy performance control of local collectivities. Good practices of european towns; Mesure des performances energetiques des collectivites locales. Bonnes pratiques de villes europeennes

    Energy Technology Data Exchange (ETDEWEB)

    Lacassagne, S.; Schilken, P.

    2003-01-01

    Some european towns developed a specific energy and environmental policy, function of many factors. Policies are implemented to favorite the energy consumption and the pollutant emission control. The actions of local collectivities in the domain have been analyzed following three axis: the measure of the energy performance of local collectivities, the territorial energy management tools, the energy integration in sectoral policies. This report takes stock on the first axis analysis. (A.L.B.)

  20. CT investigation of instability of the shoulder joint. CT-Diagnostik bei der Instabilitaet des Schultergelenkes

    Energy Technology Data Exchange (ETDEWEB)

    Grasshoff, H.; Buhtz, C.; Gellerich, I.; Knorre, C. v. (Medizinische Akademie, Magdeburg (Germany). Klinik fuer Orthopaedie Medizinische Akademie, Magdeburg (Germany). Klinik fuer Neurologie und Psychiatrie)

    1991-12-01

    CT is able to demonstrate the predisposing factors for recurrent und posttraumatic subluxation of the shoulder . In addition to demonstrating bony changes in the glenoid (Bankart lesion) and in the humeral head (Hill-Sachs lesion), CT can measure the degree of retroversion of the glenoid and torsion of the humerus. Measurements on 17 shoulders with habitual and 24 shoulders with recurrent posttraumatic subluxation showed low values for glenoid retriversion as compared with a control group. Particulary patients with habitual anterior subluxation frequently showed anteversion of the glenoid. Measurements of humeral torsion showed wide scatter amongst all groups, indicating wide biological variability. The results were compared with those published in the literature and the indications and limitations of CT for the investigation of shoulder instability are discussed. (orig.).

  1. Chemical products toxicological tests performed on lake and river fish; Essai toxicologiques de produits chimiques sur des poissons d'eau douce

    Energy Technology Data Exchange (ETDEWEB)

    Teulon, F.; Simeon, C. [Commissariat a l' Energie Atomique, Centre de Pierrelatte (France). Centre d' Etudes Nucleaires

    1966-07-01

    The volume and toxical values of industrial and urban effluents are growing higher and therefore acute or chronic pollution hazard is proportionally increased. Hence it is necessary to determine the effluent components minimum lethal dose for fish (one hour or six hours according to applicable standards). The following tests are described in this report: toxicity of some chemical products, tested individually (sodium, sulphate, sodium chloride, sodium fluoride, etc...); toxicity of some metal ions (Al{sup 3+}, Fe{sup ++}, Fe{sup 3+}, Pb{sup ++}, etc...); toxicity of certain mixed compounds for various fish species (sun perch, tench, gold fish, roach, gudgeon, bleak). The test results obtained represent local values and may be used for reference and as a general basis for other investigation and calculation of the effluents data when released. (author) [French] Le volume et la toxicite des effluents industriels et urbains deviennent de plus en plus importants, les risques de pollution aigue ou chronique croissent en proportion. Il est donc necessaire de determiner les doses minima mortelles pour le poisson (1 h ou 6 h, d'apres les conventions) des composants eventuels des effluents consideres. Les essais qui font l'objet de ce rapport sont les suivants: toxicite de quelques produits chimiques, pris separement (sulfate, chlorure, fluorure de sodium, etc...); toxicite de quelques ions metalliques: Al{sup 3+}, Fe{sup ++} et Fe{sup 3+}, Pb{sup ++}, etc...); toxicite de quelques melanges sur des especes differentes de poissons ( perche-soleil, tanche, carassin, gardon, goujon, ablette). Les chiffres obtenus representent des valeurs locales et peuvent servir de references et de base de travail pour le calcul des caracteristiques des effluents a leur rejet. (auteur)

  2. Performance processes within affect-related performance zones: a multi-modal investigation of golf performance.

    Science.gov (United States)

    van der Lei, Harry; Tenenbaum, Gershon

    2012-12-01

    Individual affect-related performance zones (IAPZs) method utilizing Kamata et al. (J Sport Exerc Psychol 24:189-208, 2002) probabilistic model of determining the individual zone of optimal functioning was utilized as idiosyncratic affective patterns during golf performance. To do so, three male golfers of a varsity golf team were observed during three rounds of golf competition. The investigation implemented a multi-modal assessment approach in which the probabilistic relationship between affective states and both, performance process and performance outcome, measures were determined. More specifically, introspective (i.e., verbal reports) and objective (heart rate and respiration rate) measures of arousal were incorporated to examine the relationships between arousal states and both, process components (i.e., routine consistency, timing), and outcome scores related to golf performance. Results revealed distinguishable and idiosyncratic IAPZs associated with physiological and introspective measures for each golfer. The associations between the IAPZs and decision-making or swing/stroke execution were strong and unique for each golfer. Results are elaborated using cognitive and affect-related concepts, and applications for practitioners are provided.

  3. Le Débat des semences

    International Development Research Centre (IDRC) Digital Library (Canada)

    Solutions pour les lois nationales régissant le contrôle des ressources génétiques et des ...... des pouvoirs) qui reconnaissent, dans une certaine mesure, les droits de gestion collectifs des ...... documentés, les performances physiques, etc.

  4. Experimental investigations on the mechanisms of the warm prestress effect; Experimentelle Untersuchungen zu den Mechanismen des WPS-Effekts

    Energy Technology Data Exchange (ETDEWEB)

    Roos, E.; Alsmann, U. [Stuttgart Univ. (Germany). Staatliche Materialpruefungsanstalt

    1998-11-01

    The Government-supported, joint project by IWW Freiburg, BAM Berlin, IWW Magdeburg, and MPA Stuttgart is intended to yield insight into the mechanisms underlying the WPS, warm prestress effect, and to derive on this basis a quantitative description of the WPS effect. (orig./CB) [Deutsch] Ziel eines durch das BMBF gefoerderten Gemeinschaftsprojekts von IWW Freiburg, BAM Berlin, IWW Magdeburg und MPA Stuttgart ist es, die Mechanismen des WPS-(warm prestress)-Effekts zu erklaeren und auf dieser Basis eine quantitative Beschreibung des WPS-Effekts zu ermoeglichen. (orig./MM)

  5. Description of the french graphite reactor and of the experiments performed in 1956; Presentation du premier reacteur a graphite francais et des experiences effectuees en 1956

    Energy Technology Data Exchange (ETDEWEB)

    Bussac, J; Leduc, C; Zaleski, C P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    This paper is an introduction to the experiments performed on the G1 reactor, experiments fully described in the papers following (670 'B to P'). The main results are given together with some comments. The neutronic parameters of the core, a description of the most important structures, and a few words of the tests leading to normal operation of the reactor under load complete our survey. (author) [French] Ce rapport presente les experiences qui furent faites sur le reacteur G1 et dont la description en detail fait l'objet des rapports suivants (670 'B a P'). Les principaux resultats sont fournis ici et commentes. On trouvera en outre les caracteristiques neutroniques du coeur actif de la pile, une description des principales installations et une mention des essais qui ont conduit au fonctionnement normal du reacteur en puissance. (auteur)

  6. An Initial Investigation of Factors Affecting Multi-Task Performance

    National Research Council Canada - National Science Library

    Branscome, Tersa A; Swoboda, Jennifer C; Fatkin, Linda T

    2007-01-01

    This report presents the results of the first in a series of investigations designed to increase fundamental knowledge and understanding of the factors affecting multi-task performance in a military environment...

  7. Performing personnel dosimetry investigations and records quality assurance

    International Nuclear Information System (INIS)

    Perle, S.C.

    2002-01-01

    Radiation Safety Officers (RSOs) sometimes face situations in which personnel dosimetry estimates are required after dosimeters issued to radiation workers (film or TLD badges, extremity dosimeters, etc.) are lost or damaged before processing. This article was prepared to help those involved with personnel dosimetry investigations became aquatinted with this process. A factor that contributes to the anxiety of those unfamiliar with dosimetry investigations is the lack of published guidance available in this subject. More printed resources are needed to help radiation safety professionals familiarize themselves and understand personnel dosimetry investigations. Topics discussed in this presentation include the justification of performing dosimetry investigations, recommendations on how to perform them and the advantages of performing such investigations

  8. Disclosure of investigators' recruitment performance in multicenter clinical trials

    DEFF Research Database (Denmark)

    Dal-Ré, Rafael; Moher, David; Gluud, Christian

    2011-01-01

    Rafael Dal-Ré and colleagues argue that the recruitment targets and performance of all site investigators in multi-centre clinical trials should be disclosed in trial registration sites before a trial starts, and when it ends.......Rafael Dal-Ré and colleagues argue that the recruitment targets and performance of all site investigators in multi-centre clinical trials should be disclosed in trial registration sites before a trial starts, and when it ends....

  9. Direction des Publications

    African Journals Online (AJOL)

    Synthese

    potential and surface properties of their mixtures were investigated, in an ... suppose that the electrostatic repulsive interactions between the two anion ... concentration, et de la conformation des ..... proteins and polysaccharides in solutions,.

  10. Epidémiologie des PFA et les performances du système de surveillance en Mauritanie de 2008 à 2012

    Science.gov (United States)

    Doumtsop, Jean Gérard Tatou; Khalef, Ishagh; Diakite, Med Lemine Brahim; Boubker, Naouri

    2014-01-01

    Introduction La Commission Régionale de Certification de l'Eradication de la poliomyélite pour l'Afrique(CRCA) en session à Brazzaville du 8 au 10 octobre 2007 avait déclaré la Mauritanie « libérée de la poliomyélite ». Objectif Décrire l’épidémiologie des PFA (Paralysies flasques aigues) et évaluer les indicateurs de performance du système de surveillance pour la période de 2008 à 2012 ayant suivi cette déclaration. Méthodes Les données du service de surveillance épidémiologique ont été nettoyées et analysées à l'aide du logiciel Epi-infoversion 3.4.3 (CDC Atlanta). Résultats 319 cas de PFA ont été notifié soit une incidence moyenne de 4.61/100000 enfants de moins de 15 ans par an. La distribution des cas cumulés par mois montre une importante notification des cas PFA pendant la période de Février à Juillet et à la suite de l’épidémie de 2009 alors que l'incidence des cas confirmés a été plus importante entre Novembre et Février. L’âge moyen était de 4ans (E.T. ±4ans) et 77.4% avaient un âge = 5ans. 18 cas de PFA ont été confirmés poliovirus sauvage(PVS) dont 6 en 2009 et 12 en 2010 et tous d'importation. L’âge moyen était de 3.4 ans (E.T ±2.6 ans). 44,4% étaient des filles et 55.5% garçons. Cette proportion était proche de celle des PFA non polio (45.1% versus 54.9%). 61% avaient reçu au plus une dose de vaccin polio orale (VPO) pour les cas de PFA polio contre 7.4% pour les PFA non polio. Aucune discrimination de genre n'a été observé sur la population des PFA ayant reçu une dose au plus (ratio-sexe= 16/17=0.94). La fièvre était présente pour 90%des cas de PFA non polio contre 85% pour les cas PVS. Cette fièvre à progresser en 3 jours pour tous les cas de PVS et pour 82,7% des cas de PFA non polio. Le taux d'hospitalisation était de 13.6% pour les cas de PFA non polio contre 89% pour les PFA polio. Dans tous les deux groupes, les membres de prédilection étaient d'abord l'un des 2 membres

  11. Motivation and elite performance : an exploratory investigation with Bulgarian athletes

    OpenAIRE

    Chantal, Yves; Guay, Frédéric; Dobreva-Martinova, Tzvetanka; Vallerand, Robert J.

    1996-01-01

    A sample of 98 Bulgarian top athletes (35 females and 63 males): canoeists, biathletes, figure skaters, boxers, tennis players and skiers, were investigated to explore the motivation of elite sport athletes and to determine the effects of motivation on performance. Participants' athletic performances in national and international events over 2 years (September 1990 to November 1992) was documented. Participants also completed the Bulgarian version of the Sport Motivation Scale (Brière, Valler...

  12. Investigations of Cutting Fluid Performance Using Different Machining Operations

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo; Belluco, Walter

    2002-01-01

    An analysis of cutting fluid performance in dif-ferent metal cutting operations is presented based on performance criteria, work material and fluid type. Cutting fluid performance was evaluated in turning, drilling, reaming and tapping operations, with respect to tool life, cutting forces and prod...... will get the same performance ranking for different metalworking fluids no matter what machining test is used, when the fluids are of the same type. Results show that this is mostly true for the water-based fluids on austenitic stainless steel while ranking did change depending on the test with straight......-gated. In the case of austenitic stainless steel as the workpiece material, results using the different operations under different cutting conditions show that the performance of vegetable oil based prod-ucts is superior or equal to that of mineral oil based products. The hypothesis was investigated that one...

  13. Post-test investigations of the FPT 0 test of the Phebus FP project; Zur Nachuntersuchungen des Versuchs FPT 0 des Phebus FP Projektes

    Energy Technology Data Exchange (ETDEWEB)

    Goetzmann, O.

    1995-08-01

    An account is given of the first test of the Phebus fission product experimental series FPT. This test, performed in Dec. 1993, was terminated when the temperature in the thermal insulation shroud attained the maximum value permitted by the safety authorities. (orig.)

  14. A Designer’s Guide to Human Performance Modelling (La Modelisation des Performances Humaines: Manuel du Concepteur).

    Science.gov (United States)

    1998-12-01

    into the Systems Engineering Process 17 5.3 Validation of HPMs 18 5.4 Commercialisation of human performance modelling software 18 5.5 Model Tool...budget) so that inappropriate models/tools are not offered. The WG agreed that another form of ’ educating ’ designers in the use of models was by means... Commercialisation of human performance modelling Software 5.2.8 Include human performance in system test. g More and more, customer’s are mandating the provision

  15. Investigation of turbidity effect on exergetic performance of solar ponds

    International Nuclear Information System (INIS)

    Atiz, Ayhan; Bozkurt, Ismail; Karakilcik, Mehmet; Dincer, Ibrahim

    2014-01-01

    Highlights: • A comprehensive experimental work on a turbidity of the solar pond. • Percentage transmission evaluation of the turbid and clean salty water of the zones. • Exergy analysis of the inner zones for turbid and clean salty water. • Turbidity effect on exergy efficiencies of the solar pond. • The thermal performance assessment by comparing the exergetic efficiencies of the solar pond. - Abstract: The present paper undertakes a study on the exergetic performance assessment of a solar pond and experimental investigation of turbidity effect on the system performance. There are various types of solar energy applications including solar ponds. One of significant parameters to consider in the assessment of solar pond performance is turbidity which is caused by dirty over time (e.g., insects, leaf, dust and wind bringing parts fall down). Thus, the turbidity in the salty water decreases solar energy transmission through the zones. In this study, the samples are taken from the three zones of the solar pond and analyzed using a spectrometer for three months. The transmission aspects of the solar pond are investigated under calm and turbidity currents to help distinguish the efficiencies. Furthermore, the maximum exergy efficiencies are found to be 28.40% for the calm case and 22.27% with turbidity effects for the month of August, respectively. As a result, it is confirmed that the solar pond performance is greatly affected by the turbidity effect

  16. Investigating How Digital Technologies Can Support a Triad-Approach for Student Assessment in Higher Education / Étude des technologies numériques comme appuis à l’évaluation tripartite des étudiants universitaires

    Directory of Open Access Journals (Sweden)

    Norm Vaughan

    2013-07-01

    Full Text Available The purpose of this research study was to investigate if and how digital technologies could be used to support a triad-approach for student assessment in higher education. This triad-approach consisted of self-reflection, peer feedback, and instructor assessment practices in a pre-service teacher education course at a Canadian university. Through online surveys, journal postings, and post-course interviews the study participants indicated that digital technologies could be used to effectively support such a triad-approach only if students were more actively involved in the assessment process and the course instructor placed a greater emphasis on formative assessment practices. Le but de cette recherche était d’étudier dans quelle mesure les technologies numériques pouvaient être utilisées pour soutenir une approche triadique de l’évaluation des étudiants universitaires. Cette approche tripartite consistait dans l’autoréflexion, la rétroaction par les pairs et les pratiques d’évaluation de l’enseignant dans un cours de formation des futurs enseignants au sein d’une université canadienne. À l’aide de sondages en ligne, d’annonces de journaux et d’entrevues post-formation, les participants à l’étude ont indiqué que les technologies numériques pouvaient être utilisées pour soutenir efficacement une telle approche triadique, à condition que les étudiants soient impliqués plus activement dans le processus d’évaluation et que l’enseignant mette davantage l’accent sur les pratiques d’évaluation formative.

  17. Investigation of the feasibility of the solar-/geothermally-assisted heat supply system Gesotherm S; Untersuchung der Durchfuehrbarkeit des solar-/ geothermisch gestuetzten Waermeversorgungssystems Gesotherm S

    Energy Technology Data Exchange (ETDEWEB)

    Liebisch, H. [EKT Energie und Kommunal-Technologie GmbH, Berlin (Germany)

    1998-12-31

    The project has been running since 1st March 1998 and is supposed to investigate the technical feasibility and economic efficiency of the Gesotherm S heat supply system in the residential area Berlin-Biesdorf/Habichtshorst (1,000 flats). Main points of investigation are: proof of feasibility and geothermal analysis of the deep pit; analysis of storage possibilities and technical synergies of combined solar-geothermal operation; determination of the regenerative supply ratio; calculation of economic efficiency; estimation of cost-saving potentials. The whole system is simulated for these studies. A new simulation model was developed for the pit. Simulations are based on the SMILE-simulation environment developed by the Technical University of Berlin. First estimates indicate costs of DM 200 per MWh without subsidies. (orig.) [Deutsch] Mit dem seit 1. Maerz 1998 laufenden Vorhaben soll die technische Realisierbarkeit und wirtschaftliche Attraktivitaet des Waermeversorgungssystems Gesotherm S am Beispiel der Nahwaermeversorgung eines Wohngebietes (ca. 1.000 WE) in Berlin-Biesdorf/Habichtshorst umfassend untersucht werden. Schwerpunkte der Untersuchung: - Machbarkeitsnachweis und geothermische Analyse der Tiefensonde - Analyse der Speichermoeglichkeiten und der technischen Synergieeffekte des solar-/geothermischen Kombinationsbetriebes - Ermittlung der regenerativen Deckungsrate - Berechnung der Wirtschaftlichkeit - Abschaetzung der Kostensenkungspotentiale. Fuer die Untersuchung wird das Gesamtsystem simuliert. Speziell fuer die Tiefensonde wird ein neues Simulationsmodell entwickelt. Basis ist die, an der TU-Berlin entwickelte, Simulationsumgebung SMILE. Erste Abschaetzungen ergaben Waermekosten ohne Subventionen von unter 200 DM/MWh. (orig.)

  18. Water pollution control. High performances finishing processing; Lutte contre la pollution des eaux. Finitions a haute performance

    Energy Technology Data Exchange (ETDEWEB)

    Gilles, P.

    1999-04-01

    The sewage recovery or recycling is an efficient way to control the water resources conservation. This paper characterizes in a first part the residual pollutants of an effluent rejected in the natural medium. It deals then the recycling and the water recovery objectives to present the possible processing. The author emphasizes some modern high performances engineering as, granular material filtration, membrane filtration, osmosis, UV disinfection, flocculation activated carbon or chemical oxidation. (A.L.B.)

  19. Numerical Investigation of Hydrodynamic Instabilities in Singing Risers Investigation numérique des instabilités hydrodynamiques de risers chantants

    Directory of Open Access Journals (Sweden)

    Brac J.

    2012-09-01

    Full Text Available Offshore transportation of gaseous fluids frequently relies on flexible pipes. Flexible pipes are obtained from the helicoidal rolling of steel tape which induces a geometrical cavity from edge to edge. Along the pipe, the gas infinitely encounters the edge to edge cavity of the same shape at regular interval. In some service conditions, acoustic vibrations of huge amplitude can arise. Indeed, in front of each cavity, there is a shear layer where Kelvin-Helmholtz instability can occur. The flow encounters a large number of cavities on its path which gives rise to a new specific problem: is there a stabilized flow? Results of large eddy scale simulations are presented as a reference but they are very costly. This gives reason to develop a numerical solution of the Orr-Sommerfeld equation in order to analyze the temporal and spatial wave lengths generated by the shear layers in front of the cavities. First, we introduce the problem of flexible risers and the analysis of some RANS and LES modeling. Second, a bibliographical study describes the state of the art about vibrations induced by cavity. Third, we state the Orr-Sommerfeld equation and set the problem we want to solve in terms of generalized eigen values Numerical discretizations are based on finite difference approaches of fourth orders. The choice of the relevant eigen values among all those provided by the solutions of the numerical problem is the main difficulty to be tackled. Le transport offshore de gaz utilise souvent des conduites flexibles. Elles sont fabriquées en enroulant en hélice un ruban d’acier; au contact bord à bord des tours d’hélice, une cavité apparaît. Le gaz s’écoule en conduite et rencontre cette cavité à intervalles réguliers, toujours avec la même forme. Dans certaines conditions d’usage, des vibrations acoustiques de grandes amplitudes apparaissent. En effet, devant chaque cavité, il y a une couche de cisaillement où une instabilité de type

  20. Injectabilite des coulis de ciment dans des milieux fissures

    Science.gov (United States)

    Mnif, Thameur

    Le travail presente ici est un bilan du travaux de recherche effectues sur l'injectabilite des coulis de ciment dans lu milieux fissures. Un certain nombre de coulis a base de ciment Portland et microfin ont ete selectionnes afin de caracteriser leur capacite a penetrer des milieux fissures. Une partie des essais a ete menee en laboratoire. L'etude rheologique des differents melanges a permis de tester l'influence de l'ajout de superplastifiant et/ou de fumee de silice sur la distribution granulometrique des coulis et par consequent sur leur capacite a injecter des colonnes de sable simulant un milieu fissure donne. La classe granulometrique d'un coulis, sa stabilite et sa fluidite sont apparus comme les trois facteurs principaux pour la reussite d'une injection. Un facteur de finesse a ete defini au cours de cette etude: base sur la classe granulometrique du ciment et sa stabilite, il peut entrer dans la formulation theorique du debit d'injection avant application sur chantier. La deuxieme et derniere partie de l'etude presente les resultats de deux projets de recherche sur l'injection realises sur chantier. L'injection de dalles de beton fissurees a permis le suivi de l'evolution des pressions avec la distance au point d'injection. L'injection de murs de maconnerie a caractere historique a montre l'importance de la definition de criteres de performance des coulis a utiliser pour traiter un milieu donne et pour un objectif donne. Plusieurs melanges peuvent ainsi etre predefinis et mis a disposition sur le chantier. La complementarite des ciments traditionnels et des ciments microfins devient alors un atout important. Le choix d'utilisation de ces melanges est fonction du terrain rencontre. En conclusion, cette recherche etablit une methodologie pour la selection des coulis a base de ciment et des pressions d'injection en fonction de l'ouverture des fissures ou joints de construction.

  1. Investigating The Effect Of Job Stress On Performance Of Employees

    OpenAIRE

    Oyungerel Altangerel; Wang Ruimei; Ehsan Elahi; Bayandalai Dash

    2015-01-01

    Abstract This study is conducted to investigate the effect of job stress on job performance. A random sampling technique is used to collect primary data of 120 employees of four telecommunication companies of Mongolia i.e. Mobicom Unitel Skytel and G-mobile. A well-structured questionnaire is utilized to collect relevant data descriptive and logistic analysis is used to estimate and describe the findings of results. It is found that work overload is major reason of stress among employees and ...

  2. Empirical Investigation of Key Business Factors for Digital Game Performance

    OpenAIRE

    Aleem, Saiqa; Capretz, Luiz Fernando; Ahmed, Faheem

    2015-01-01

    Game development is an interdisciplinary concept that embraces software engineering, business, management, and artistic disciplines. This research facilitates a better understanding of the business dimension of digital games. The main objective of this research is to investigate empirically the effect of business factors on the performance of digital games in the market and to answer the research questions asked in this study. Game development organizations are facing high pressure and compet...

  3. Performances zootechniques des dindonneaux nourris à base de farine d'asticots

    Directory of Open Access Journals (Sweden)

    Agodokpessi, BJ.

    2016-01-01

    Full Text Available Zootechnic Performances of Turkey Poults Fed with Maggot Flour -based Rations. Fish meal was partially substituted by maggot flour in the rations of 96 young turkeys aged between 0 and2 days. Chicks with their mothers were randomly divided into three batches and fed during the starting phase that lasted four weeks with rations R1, R2 and R3 containing respectively 0%, 5% and 10% flour maggots. During the growth phase which also lasted 4 weeks, the proportion of flour maggots in the ration was halved. After the starting phase, the young turkeys of batches R3 and R2 showed an Average Daily Gain (ADG slightly above the control, despite a significantly lower food consumption (p0.05 between the different batches of animals. The mortality rate of 16.7%, 14.5% and 14.8% respectively for lots 1, 2 and 3 showed no significant differences (p>0.05.

  4. An Investigation of Unified Memory Access Performance in CUDA

    Science.gov (United States)

    Landaverde, Raphael; Zhang, Tiansheng; Coskun, Ayse K.; Herbordt, Martin

    2015-01-01

    Managing memory between the CPU and GPU is a major challenge in GPU computing. A programming model, Unified Memory Access (UMA), has been recently introduced by Nvidia to simplify the complexities of memory management while claiming good overall performance. In this paper, we investigate this programming model and evaluate its performance and programming model simplifications based on our experimental results. We find that beyond on-demand data transfers to the CPU, the GPU is also able to request subsets of data it requires on demand. This feature allows UMA to outperform full data transfer methods for certain parallel applications and small data sizes. We also find, however, that for the majority of applications and memory access patterns, the performance overheads associated with UMA are significant, while the simplifications to the programming model restrict flexibility for adding future optimizations. PMID:26594668

  5. Investigating the Performance Impact of Newness from a Design Perspective

    DEFF Research Database (Denmark)

    Salomo, Søren; Talke, Katrin; Lutz, Antje

    2008-01-01

    and consumer research, we build an argument for why product innovativeness both from a design and technology perspective may impact sales performance of new products. In order to investigate these effects, we conducted a study based on a sample of 157 new car models launched in the German market between 1978...... innovativeness is very rarely assessed from a design perspective. This fact is surprising, especially when considering that in many markets new products are very similar in technological features, but compete on the product design (Veryzer, 1995). Drawing from different literature streams, such as design...... and 2006. For measuring both innovativeness dimensions, different data collection methods are combined, such as expert interviews, expert ratings, and document analyses. Responding to recent calls for more objective performance metrics (Sourescu et al., 2003), actual sales data are used as a performance...

  6. Investigating performance of microchannel evaporators with different manifold structures

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Junye; Qu, Xiaohua; Qi, Zhaogang; Chen, Jiangping [Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, No. 800, Dongchuan Rd, Shanghai 200240 (China)

    2011-01-15

    In this paper, the performances of microchannel evaporators with different manifold structures are experimentally investigated. Eight evaporator samples with 7 different designs of the I/O manifold and 5 different designs of the return manifold are made for this study. The performances of the evaporator samples are tested on a psychometric calorimeter test bench with the refrigerant 134A at a real automotive AC condition. The results on the variations of the cooling capacity and air temperature distribution of the evaporator due to the deflector designs in the I/O manifold and flow hole arrangements in the return manifold are presented and analyzed. By studying the KPI's for the performance of an evaporator, the design trade-off for an evaporator designer is summarized and discussed. (author)

  7. Etude des performances de solveurs deterministes sur un coeur rapide a caloporteur sodium

    Science.gov (United States)

    Bay, Charlotte

    The reactors of next generation, in particular SFR model, represent a true challenge for current codes and solvers, used mainly for thermic cores. There is no guarantee that their competences could be straight adapted to fast neutron spectrum, or to major design differences. Thus it is necessary to assess the validity of solvers and their potential shortfall in the case of fast neutron reactors. As part of an internship with CEA (France), and at the instigation of EPM Nuclear Institute, this study concerns the following codes : DRAGON/DONJON, ERANOS, PARIS and APOLLO3. The precision assessment has been performed using Monte Carlo code TRIPOLI4. Only core calculation was of interest, namely numerical methods competences in precision and rapidity. Lattice code was not part of the study, that is to say nuclear data, self-shielding, or isotopic compositions. Nor was tackled burnup or time evolution effects. The study consists in two main steps : first evaluating the sensitivity of each solver to calculation parameters, and obtain its optimal calculation set ; then compare their competences in terms of precision and rapidity, by collecting usual quantities (effective multiplication factor, reaction rates map), but also more specific quantities which are crucial to the SFR design, namely control rod worth and sodium void effect. The calculation time is also a key factor. Whatever conclusion or recommendation that could be drawn from this study, they must first of all be applied within similar frameworks, that is to say small fast neutron cores with hexagonal geometry. Eventual adjustments for big cores will have to be demonstrated in developments of this study.

  8. Evaluation des pratiques de gestion des adventices en riziculture

    African Journals Online (AJOL)

    Les résultats ont montré que les méthodes de gestion de l'enherbement ont .... Le contrôle des adventices en riziculture irriguée a principalement .... mesurer la hauteur des plantes et la longueur ..... Performance agronomique du Sys- tème de ...

  9. Lubrifiants extrême-pression pour engrenages. Aspects chimiques de l'optimisation des performances mécaniques Extreme-Pressure Gear Lubricants: Chemical Aspects for Obtaining Optimum Mechanical Performances

    Directory of Open Access Journals (Sweden)

    Born M.

    2006-11-01

    plusieurs types de dérivés sulfurés et/ou phosphorés sera parfois nécessaire. Enfin, des additifs complémentaires : anticorrosion, en particulier pour protéger les métaux cuivreux, antirouille, antimousse, réducteur de frottement seront sélectionnés en évitant des interactions préjudiciables aux performances mécaniques. La formulation d'additifs destinés aux lubrifiants extrême-pression pour engrenages nécessite donc un choix judicieux des composants de sorte que chacun d'entre-eux puisse assumer correctement sa fonction pour une durée aussi longue que possible. Optimal conditions for engine efficiency rarely correspond to the needs of the end use of energy insofar as rpm and torque are concerned. This is why intermediary mechanisms are needed for making the necessary adjustments, i. e. reducing gears, gear boxes (manual or automatic, transfer cases and rear axles. Modern technology, particularly for transportation, requires the reduction of both the mass and volume of such mechanisms, meaning that greater and greater specific loads must pass through gears. Despite technological progress made in designing and manufacturing gears, their proper lubrication remains a determinant factor. The lubrication of heavily loaded gears requires the use of chemical components called extreme-pressure additives . Among them, phosphorus and sulfur combinations are widely used in industry and will be the only ones considered in this article. Sulfur is the element most often used to obtain extreme-pressure properties. It forms an easily sheared film of iron sulfide on microweldings. Sulfur is present in oil as organic sulfides or polysulfides, but its lability must be adjusted to have a solely local effect without causing any corrosion. A good understanding of the relations between the structure and mechanical properties of polysulfides is required for optimizing the structure of industrial additives. Antiwear properties are usually provided by phosphorus compounds, i. e

  10. Investigation of Fastening Performance of Subminiature Serrated Bolt

    Energy Technology Data Exchange (ETDEWEB)

    Jang, Myung Guen; Jeong, Jin Hwan; Jang, Yeon Hui; Kim, Hee Cheol; Kim, Jong-Bong [Seoul Nat’l Univ. of Science & Tech, Seoul (Korea, Republic of)

    2017-04-15

    As the size of electric products such as mobile phones and smart watches decrease, the bolts used to assemble these products should also be miniaturized. A miniature-sized bolt has to provide sufficient joining torque and anti-releasing torque to keep the components together. We studied a serrated bolt as a candidate for a miniature-sized fastener to increase the anti-releasing torque. In a serrated bolt, a serrated shape is formed on the bottom surface of the bolt head to create an obstacle to releasing. In this study, finite element analyses for the joining and releasing of bolts were carried out, and the anti-releasing performance was predicted. Based on the results of analyses using various numbers of serrations and fastening depths, the effects of the number of serrations and fastening depth on the anti-releasing performance were investigated.

  11. Investigation of Fastening Performance of Subminiature Serrated Bolt

    International Nuclear Information System (INIS)

    Jang, Myung Guen; Jeong, Jin Hwan; Jang, Yeon Hui; Kim, Hee Cheol; Kim, Jong-Bong

    2017-01-01

    As the size of electric products such as mobile phones and smart watches decrease, the bolts used to assemble these products should also be miniaturized. A miniature-sized bolt has to provide sufficient joining torque and anti-releasing torque to keep the components together. We studied a serrated bolt as a candidate for a miniature-sized fastener to increase the anti-releasing torque. In a serrated bolt, a serrated shape is formed on the bottom surface of the bolt head to create an obstacle to releasing. In this study, finite element analyses for the joining and releasing of bolts were carried out, and the anti-releasing performance was predicted. Based on the results of analyses using various numbers of serrations and fastening depths, the effects of the number of serrations and fastening depth on the anti-releasing performance were investigated.

  12. Investigation of Educational Buildings in Terms of Daylighting Performance

    Directory of Open Access Journals (Sweden)

    İlknur ERLALELİTEPE

    2011-01-01

    Full Text Available Educational buildings have the priority among other building types in daylight performance studies. There are several reasons for this. Classrooms which are used during the whole day should have sufficient and homogeneously distributed daylight. In insufficient daylight conditions, the use of electrical lighting increases energy consumption. Users’ visual comfort should also be assured, and design incorporating natural light requires the analysis of sun protection devices in order to avoid glare and excessive heat. Also, atriums and skylights can be included in the building design with the aim of distributing light equally and in a relatively balanced manner throughout the building. However, lighting schemes are often proposed by architects and professionals who tend to make use of different design tools, and it would be pertinent to investigate whether these tools perform as desired. This study analyses daylight design principles and design elements in educational buildings. It outlines the method which has been used to analyse the daylight performance of buildings. A university building was selected for the field study. Measurements were taken in sample spaces to determine daylight performance. Utilising comparison between standard values and measured values, findings are presented in the form of tables, drawings and figures.

  13. Numerical simulation investigation on centrifugal compressor performance of turbocharger

    International Nuclear Information System (INIS)

    Li, Jie; Yin, Yuting; Li, Shuqi; Zhang, Jizhong

    2013-01-01

    In this paper, the mathematical model of the flow filed in centrifugal compressor of turbocharger was studied. Based on the theory of computational fluid dynamics (CFD), performance curves and parameter distributions of the compressor were obtained from the 3-D numerical simulation by using CFX. Meanwhile, the influences of grid number and distribution on compressor performance were investigated, and numerical calculation method was analyzed and validated, through combining with test data. The results obtained show the increase of the grid number has little influence on compressor performance while the grid number of single-passage is above 300,000. The results also show that the numerical calculation mass flow rate of compressor choke situation has a good consistent with test results, and the maximum difference of the diffuser exit pressure between simulation and experiment decrease to 3.5% with the assumption of 6 kPa additional total pressure loss at compressor inlet. The numerical simulation method in this paper can be used to predict compressor performance, and the difference of total pressure ratio between calculation and test is less than 7%, and the total-to-total efficiency also have a good consistent with test.

  14. Numerical simulation investigation on centrifugal compressor performance of turbocharger

    Energy Technology Data Exchange (ETDEWEB)

    Li, Jie [China Iron and Steel Research Institute Group, Beijing (China); Yin, Yuting [China North Engine Research Institute, Datong (China); Li, Shuqi; Zhang, Jizhong [Science and Technology Diesel Engine Turbocharging Laboratory, Datong (China)

    2013-06-15

    In this paper, the mathematical model of the flow filed in centrifugal compressor of turbocharger was studied. Based on the theory of computational fluid dynamics (CFD), performance curves and parameter distributions of the compressor were obtained from the 3-D numerical simulation by using CFX. Meanwhile, the influences of grid number and distribution on compressor performance were investigated, and numerical calculation method was analyzed and validated, through combining with test data. The results obtained show the increase of the grid number has little influence on compressor performance while the grid number of single-passage is above 300,000. The results also show that the numerical calculation mass flow rate of compressor choke situation has a good consistent with test results, and the maximum difference of the diffuser exit pressure between simulation and experiment decrease to 3.5% with the assumption of 6 kPa additional total pressure loss at compressor inlet. The numerical simulation method in this paper can be used to predict compressor performance, and the difference of total pressure ratio between calculation and test is less than 7%, and the total-to-total efficiency also have a good consistent with test.

  15. Development of the NRC`s Human Performance Investigation Process (HPIP). Volume 2, Investigators`s Manual

    Energy Technology Data Exchange (ETDEWEB)

    Paradies, M.; Unger, L. [System Improvements, Inc., Knoxville, TN (United States); Haas, P.; Terranova, M. [Concord Associates, Inc., Knoxville, TN (United States)

    1993-10-01

    The three volumes of this report detail a standard investigation process for use by US Nuclear Regulatory Commission (NRC) personnel when investigating human performance related events at nuclear power plants. The process, called the Human Performance Investigation Process (HPIP), was developed to meet the special needs of NRC personnel, especially NRC resident and regional inspectors. HPIP is a systematic investigation process combining current procedures and field practices, expert experience, NRC human performance research, and applicable investigation techniques. The process is easy to learn and helps NRC personnel perform better field investigations of the root causes of human performance problems. The human performance data gathered through such investigations provides a better understanding of the human performance issues that cause event at nuclear power plants. This document, Volume II, is a field manual for use by investigators when performing event investigations. Volume II includes the HPIP Procedure, the HPIP Modules, and Appendices that provide extensive documentation of each investigation technique.

  16. Investigation on the performance of bridge approach slab

    Directory of Open Access Journals (Sweden)

    Abdelrahman Amr

    2018-01-01

    Full Text Available In Egypt, where highway bridges are to be constructed on soft cohesive soils, the bridge abutments are usually founded on rigid piles, whereas the earth embankments for the bridge approaches are directly founded on the natural soft ground. Consequently, excessive differential settlement frequently occurs between the bridge deck and the bridge approaches resulting in a “bump” at both ends of the bridge deck. Such a bump not only creates a rough and uncomfortable ride but also represents a hazardous condition to traffic. One effective technique to cope with the bump problem is to use a reinforced concrete approach slab to provide a smooth grade transition between the bridge deck and the approach pavement. Investigating the geotechnical and structural performance of approach slabs and revealing the fundamental affecting factors have become mandatory. In this paper, a 2-D finite element model is employed to investigate the performance of approach slabs. Moreover, an extensive parametric study is carried out to appraise the relatively optimum geometries of approach slab, i.e. slab length, thickness, embedded depth and slope, that can yield permissible bumps. Different geo-mechanical conditions of the cohesive foundation soil and the fill material of the bridge embankment are examined.

  17. Investigation of the Hygrothermal Performance of Alternative Insulation Materials

    DEFF Research Database (Denmark)

    Rode, Carsten; Kristiansen, Finn Harken; Rasmussen, Niels T.

    1999-01-01

    The paper gives an account of hygrothermal investigations carried out on some insulation products which are "alternative" to the ones that are traditionally used in Danish constructions. The alternative products are claimed to be friendly both to the environment and to the labour force. The mater......The paper gives an account of hygrothermal investigations carried out on some insulation products which are "alternative" to the ones that are traditionally used in Danish constructions. The alternative products are claimed to be friendly both to the environment and to the labour force...... is determined for the different materials with a guarded hot plate apparatus in which different vapour pressure conditions can be maintained over the specimens. The apparatus and some results are presented.2. Computational analysis of the hygrothermal performance of constructions with alternative insulation...... products.The hygrothermal performance of constructions with alternative insulation products is analysed with a computational model for combined heat and moisture transfer. The analysis concerns both traditional wall and roof constructions with the alternative insulation products, and some alternative...

  18. INTRINSIC AND EXTRINSIC MOTIVATION - AN INVESTIGATION OF PERFORMANCE CORRELATION

    Directory of Open Access Journals (Sweden)

    Abrudan Maria-Madela

    2011-07-01

    Full Text Available A series of research untaken in the last decade have revealed some interesting aspects regarding the effects of different types of motivation on performance. Among the researchers who have shown interest in this field we can number: Richard Ryan, Edward Deci, Sam Glucksberg, Dan Ariely, Robert Eisenhower, Linda Shanock, analysts from London School of Economics, and others. Their findings suggest that extrinsic incentives may have a negative impact on overall performance, but a general agreement in this respect has not been reached. In this paper we intend to shed some light upon the relationship between intrinsic and extrinsic motivation and performance. Experts define intrinsic motivation as being the execution of a task or activity because of the inherent satisfaction arising from it rather than due to some separate outcome. In contrast with intrinsic motivation, we speak of extrinsic motivation whenever an activity is done in order to attain some separable outcome. With the purpose of contributing to the clarification of the links between concepts, we initiated and conducted an explanatory research. The research is based on the analysis of the relations between the results obtained by third year students and their predominant type of motivation. For this, we formulated and tested four work hypotheses using a combination of quantitative methods (investigation and qualitative methods (focus group. After the validation of the questionnaires, the respondents were divided into four categories: intrinsically motivated, extrinsically motivated, both intrinsically and extrinsically motivated and unmotivated. To analyze the collected data, we made use of Excel and SPSS. Some of the primary conclusions of the research are as follows: as the average increases, the percent of individuals having both extrinsic and intrinsic motivation is decreasing; the highest percentage of unmotivated students is concentrated in the highest average category; Female

  19. Investigating The Effect Of Job Stress On Performance Of Employees

    Directory of Open Access Journals (Sweden)

    Oyungerel Altangerel

    2015-02-01

    Full Text Available Abstract This study is conducted to investigate the effect of job stress on job performance. A random sampling technique is used to collect primary data of 120 employees of four telecommunication companies of Mongolia i.e. Mobicom Unitel Skytel and G-mobile. A well-structured questionnaire is utilized to collect relevant data descriptive and logistic analysis is used to estimate and describe the findings of results. It is found that work overload is major reason of stress among employees and majority of employees reduce their productivity and loss of interest in job due to stress. As for concern health issue eyes strain dizziness and disorder in sleep are due to job stress. According to results of logit model parameters of education experience and salary per month are statistically significant and have positive impact on employees performance but age family size no relaxation time giving to employees during working hours and work overload are statistically significant and have negative impact on employees job performance. For suggestions companies should increase salaries of employees and give reward to employees those have work overload. Workload of employees should reduce by proper work redesign and efficient management by proper allocation of job. It is also found that stress also becomes reason of several illnesses and majority of employees dont have medical facilities first aid at working place therefore it is suggested that companies should also provide medical facilities first aid for employees at work place.

  20. Investigating the impact of fasciolosis on cattle carcase performance.

    Science.gov (United States)

    Sanchez-Vazquez, Manuel J; Lewis, Fraser I

    2013-03-31

    Liver fluke is a manifestation of bovine fasciolosis and its presence is compulsorily investigated as part of routine official abattoir inspections. It is known that the presence of fasciolosis negatively influences beef production, interfering with weight gain and fertility. Recent reports suggest increased occurrence of this parasite worldwide. This paper aims to investigate the impact of fasciolosis on beef cattle performance by examining the association of liver fluke with carcase characteristics and its value. Cattle slaughtered between 2005 and 2010 (328, 137 cattle (of which 12.6% were positive to liver fluke) sourced from 2278 farms) are analysed adjusting for the effect of gender, age, breed, season and year. Carcases with liver fluke have lower cold weight than those carcases free of fluke, estimated coefficient -0.63 kg (95% confidence intervals (CI) -0.93, -0.33). Carcases with liver fluke have lower price than those carcases free of fluke, estimated coefficient -£1.5 (95% CI -2.24, -0.74). The presence of liver fluke is associated with lower carcase conformation scores compared to carcases with fluke absence, proportional odds ratio (POR) 0.89 (95% CI 0.87-0.91). Similarly, the presence of liver fluke is associated with lower levels of fat in the carcase compared to carcases with fluke absence, POR 0.97 (95% CI 0.95-0.99). These results indicate a potential negative effect of the parasitism on carcase performance. The downgrading of the carcase impacts its value and therefore the price paid to the farmer. Both farmers and abattoir operators share a common interest in the control of fasciolosis in order to optimise the profitability of beef production. This study shows the utility of abattoir post-mortem inspection as a tool to monitoring animal health and production. Copyright © 2012 Elsevier B.V. All rights reserved.

  1. Evaluation des performances des mémoires CBRAM (Conductive bridge memory) afin d’optimiser les empilements technologiques et les solutions d’intégration

    OpenAIRE

    Guy, Jérémy

    2015-01-01

    The constant evolution of the data storage needs over the last decades have led the technological landscape to completely change and reinvent itself. From the early stage of magnetic storage to the most recent solid state devices, the bit density keeps increasing toward what seems from a consumer point of view infinite storage capacity and performances. However, behind each storage technology transition stand density and performances limitations that required strong research work to overcome....

  2. Experimental investigation of a super performance dew point air cooler

    International Nuclear Information System (INIS)

    Xu, Peng; Ma, Xiaoli; Zhao, Xudong; Fancey, Kevin

    2017-01-01

    Highlights: •The cooler had a complex heat & mass exchanger with an advanced wet material layer. •Intermittent water supply scheme was implemented. •The cooler achieved 100–160% higher COP compared to the existing dew point coolers. •Electricity use of the cooler was reduced by 50–70% compared to existing dew coolers. •This optimal working air ratio was 0.364 that enabled maximised cooling effectiveness. -- Abstract: This paper presents an experimental investigation of a super performance dew point air cooler which, by employing a super performance wet material layer, innovative heat and mass exchanger and intermittent water supply scheme, has achieved a significantly higher energy efficiency (i.e. Coefficient of Performance, COP) and a much lower electrical energy use compared to the existing air coolers of the same type. This involves the dedicated system design & construction, fully planned experimental testing under various simulated climatic conditions representing the climate of hot & dry, warm & dry, moderate, warm & humid and standard lab testing condition, testing results analysis and discussion, as well as the parallel comparison against the commercial dew point air cooler. Under the standard test condition, i.e. dry bulb temperature of 37.8 °C and coincident wet bulb temperature of 21.1 °C, the prototype cooler achieved the wet-bulb cooling effectiveness of 114% and dew-point cooling effectiveness of 75%, yielding a significantly high COP value of 52.5 at the optimal working air ratio of 0.364. The testing also indicated that the lower inlet air relative humidity led to a higher cooling efficiency, while the lower cooling output helped increase COP and cooling effectiveness (including the wet-bulb effectiveness and dew-point effectiveness) of the cooler.

  3. An investigation and comparison on network performance analysis

    OpenAIRE

    Lanxiaopu, Mi

    2012-01-01

    This thesis is generally about network performance analysis. It contains two parts. The theory part summarizes what network performance is and inducts the methods of doing network performance analysis. To answer what network performance is, a study into what network services are is done. And based on the background research, there are two important network performance metrics: Network delay and Throughput should be included in network performance analysis. Among the methods of network a...

  4. Etude analytique des performances des systèmes radio-mobiles en présence d'évanouissements et d'effet de masque

    OpenAIRE

    Mary , Philippe

    2008-01-01

    This thesis focuses on analytical performance studies of radiocommunication systems in shadowing environments. The shadowing implied by the presence of large scale obstacles between transmitter and receiver, induces a change in the average symbol error probability (SEP). The symbol error outage (SEO), defined as the probability to observe a given average SEP over a fading channel in a shadowing environment, is hence a more adequate metric. The most challenging issue in the SEO study is that an...

  5. Investigation and Prediction of RF Window Performance in APT Accelerators

    International Nuclear Information System (INIS)

    Humphries, S. Jr.

    1997-01-01

    The work described in this report was performed between November 1996 and May 1997 in support of the APT (Accelerator Production of Tritium) Program at Los Alamos National Laboratory. The goal was to write and to test computer programs for charged particle orbits in RF fields. The well-documented programs were written in portable form and compiled for standard personal computers for easy distribution to LANL researchers. They will be used in several APT applications including the following. Minimization of multipactor effects in the moderate β superconducting linac cavities under design for the APT accelerator. Investigation of suppression techniques for electron multipactoring in high-power RF feedthroughs. Modeling of the response of electron detectors for the protection of high power RF vacuum windows. In the contract period two new codes, Trak-RF and WaveSim, were completed and several critical benchmark etests were carried out. Trak-RF numerically tracks charged particle orbits in combined electrostatic, magnetostatic and electromagnetic fields. WaveSim determines frequency-domain RF field solutions and provides a key input to Trak-RF. The two-dimensional programs handle planar or cylindrical geometries. They have several unique characteristics

  6. Differentiation strategies and winery financial performance: An empirical investigation

    Directory of Open Access Journals (Sweden)

    Sandra K. Newton

    2015-12-01

    Full Text Available This investigation into small-to-medium sized wine businesses empirically tests linkages among differentiation strategies and financial performance over time. Using a two-by-two model, we examine the impact of differentiation strategies on profitability and growth. Financial and operational data from a proprietary database of 71 United States wineries, encompassing five continuous years (2006–2010, provide longitudinal robustness. Management decisions regarding resources and capabilities are used to cluster the sample firms into a two-by-two differentiation strategy model. Those wineries sourcing over 50% estate grapes and distributing over 50% direct-to-consumer have higher gross margins compared to other clusters. Direct-to-consumer distribution decisions impact growth. Results of this research indicate that distribution channel choice-direct-to-consumer-positively impacts gross profit margin and winery growth rates. Supply chain choice-sourcing estate grapes also positively impacts gross profit margin. This study uses reported financial data that have not been made available to researchers.

  7. Investigations for assessing the health hazards of dichloromethane exposure. Final report; Untersuchungen zur Abschaetzung des gesundheitlichen Risikos infolge Dichlormethanexposition. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Pankow, D. [Halle-Wittenberg Univ., Halle (Germany). Inst. fuer Pharmakologie und Toxikologie

    1994-04-01

    Vorliegen erhoehter CYP2E1-Aktivitaet zu erhoehter DCM-bedingter COHb-Bildung kommt. Bei simultaner Einwirkung von Loesungs- und Arzneimitteln, die selbst CYP2E1-Substrat sind, aber die COHb-Bildung bei erhoehten DCM-Spiegeln im Blut vermindert. Das bedeutet, dass sowohl der COHb-Wert von 5% als auch der DCM-Spiegel im Blut von 1 mg/l als BAT-Werte dann besonders kritisch zu bewerten sind, wenn DCM-Exponierte unter zusaetzlicher Einwirkung von Substraten oder Induktoren von CYP2E1 stehen. Unfallszenarien - kurze Expositionen gegenueber sehr hohen DCM-Konzentrationen - lassen sich durch existierende physiologische pharmakokinetische Modelle nicht befriedigend beschreiben. Die moderate Hypoxie nach DCM-Exposition wird nicht allein durch die Carboxyhaemoglobinaemie sondern auch durch eine Hemmung der Cytochromoxydaseaktivitaet determiniert. Der Organismus reagiert mit Stoerungen des Herz-Kreislauf-Systems erst, wenn wesentlich hoehere DCM-Konzentrationen einwirken als der MAK-Wert, und das gilt auch unter zusaetzlichen pathophysiologischen Bedingungen, die dann per se kardiovaskulaere Veraenderungen bestimmen. DCM-Intoxikationen koennen mit Herzrhythmusstoerungen verbunden sein. (orig.)

  8. 1 Étude des performances thermiques d'un réfrigérateur local basé ...

    African Journals Online (AJOL)

    utilisateur

    l'évaporation de l'eau à travers un milieu poreux (la température et l'hygrométrie de l'air et la surface totale d'échange). L'analyse des courbes expérimentales et théoriques (simulation) montre que la température de l'eau du réfrigérateur ne peut être abaissée au-delà de la température de bulbe humide de.

  9. Numerical investigations of the electroslag remelting process for alloy 718; Numerische Untersuchungen des Elektroschlacke-Umschmelzprozesses fuer Alloy 718

    Energy Technology Data Exchange (ETDEWEB)

    Giesselmann, Nils

    2014-07-01

    literature sources. Interdendritic fluid flow simulations on a micro scale were performed based on the lattice Boltzmann method to determine the permeability perpendicular to the dendrites. The simulated permeability agrees very well with the calibrated permeability obtained from the remelting simulation. Besides using this permeability to validate the calibrated value, knowledge of the interdendritic permeability is required in Boettger's freckle criterion. The influence of the copper mold's base plate cooling on the process has also been investigated. It was found that its effect on the pool decreases quickly as the ingot grows. The influenced region gets even smaller as the melting rate is increased. Furthermore the electrode's energy balance has been reviewed. It was concluded analytically and numerically that for a specific alloy the ratio between melting rate and electrode diameter is crucial to predicting a possible rise of the melting rate before entering the hot topping stage.

  10. Investigating social gaze as an action-perception online performance.

    Science.gov (United States)

    Grynszpan, Ouriel; Simonin, Jérôme; Martin, Jean-Claude; Nadel, Jacqueline

    2012-01-01

    Gaze represents a major non-verbal communication channel in social interactions. In this respect, when facing another person, one's gaze should not be examined as a purely perceptive process but also as an action-perception online performance. However, little is known about processes involved in the real-time self-regulation of social gaze. The present study investigates the impact of a gaze-contingent viewing window on fixation patterns and the awareness of being the agent moving the window. In face-to-face scenarios played by a virtual human character, the task for the 18 adult participants was to interpret an equivocal sentence which could be disambiguated by examining the emotional expressions of the character speaking. The virtual character was embedded in naturalistic backgrounds to enhance realism. Eye-tracking data showed that the viewing window induced changes in gaze behavior, notably longer visual fixations. Notwithstanding, only half of the participants ascribed the window displacements to their eye movements. These participants also spent more time looking at the eyes and mouth regions of the virtual human character. The outcomes of the study highlight the dissociation between non-volitional gaze adaptation and the self-ascription of agency. Such dissociation provides support for a two-step account of the sense of agency composed of pre-noetic monitoring mechanisms and reflexive processes, linked by bottom-up and top-down processes. We comment upon these results, which illustrate the relevance of our method for studying online social cognition, in particular concerning autism spectrum disorders (ASD) where the poor pragmatic understanding of oral speech is considered linked to visual peculiarities that impede facial exploration.

  11. Investigating social gaze as an action-perception online performance

    Directory of Open Access Journals (Sweden)

    Ouriel eGrynszpan

    2012-04-01

    Full Text Available In interpersonal interactions, linguistic information is complemented by non-linguistic information originating largely from facial expressions. The study of online face-to-face social interaction thus entails investigating the multimodal simultaneous processing of oral and visual percepts. Moreover, gaze in and of itself functions as a powerful communicative channel. In this respect, gaze should not be examined as a purely perceptive process but also as an active social performance. We designed a task involving multimodal deciphering of social information based on virtual characters, embedded in naturalistic backgrounds, who directly address the participant with non-literal speech and meaningful facial expressions. Eighteen adult participants were to interpret an equivocal sentence which could be disambiguated by examining the emotional expressions of the character speaking to them face-to-face. To examine self-control and self-awareness of gaze in this context, visual feedback is provided to the participant by a real-time gaze-contingent viewing window centered on the focal point, while the rest of the display is blurred. Eye-tracking data showed that the viewing window induced changes in gaze behaviour, notably longer visual fixations. Notwithstanding, only half the participants ascribed the window displacements to their eye movements. These results highlight the dissociation between non volitional gaze adaptation and self-ascription of agency. Such dissociation provides support for a two-step account of the sense of agency composed of pre-noetic monitoring mechanisms and reflexive processes. We comment upon these results, which illustrate the relevance of our method for studying online social cognition, especially concerning Autism Spectrum Disorders (ASD where poor pragmatic understanding of oral speech are considered linked to visual peculiarities that impede face exploration.

  12. Personality Factors Affecting Pilot Combat Performance: A Preliminary Investigation

    National Research Council Canada - National Science Library

    Siem, Frederick M; Murray, Michael W

    1997-01-01

    .... The present research was designed to examine the relationship between personality and combat performance using the "Big Five" model of personality and a multicomponent model of pilot combat performance...

  13. Investigating the Effects of Different Working Postures on Cognitive Performance

    Directory of Open Access Journals (Sweden)

    Sharareh Mohammadi

    2018-01-01

    Conclusion This study demonstrates that cognitive performance is affected by working postures. This study demonstrates that standard sitting posture is the best posture. Therefore, it is recommended that sitting posture can help in increasing cognitive performance in the workplace.

  14. Performance du spectrometre a muons d’ALICE. Production et mesure des bosons faibles dans des collisions d’ions lourds aupres du LHC

    CERN Document Server

    Conesa Del Valle, Zaida; Moreno, F Fernandez

    2007-01-01

    Nucleus-nucleus collisions are the unique tool available to investigate the QCD matter phase diagram in the laboratory. A lot of work has been devoted to explore it in different domains in the last 3 decades, and the forthcoming LHC collider will contribute to such research increasing the collision center-of-mass energy by a factor 30 and the energy densities by a factor 1-10 with respect to the RHIC collider [C+04, A+06].Only a comprehensive analysis of a wide spectrum of experimental observables can help to fully characterize the prospected matter. In particular, valuable information is expected from charm and beauty production, the situation from SPS and RHIC charmonia data being puzzling [GdC07, Lei07, A+00a, Sco07], and the c¯c (b¯b) yields per central nucleon-nucleon collision being increased from 10 (0.1) to 110 (5) from RHIC to LHC [C+04, MG07]. Whether quarkonia will thermalize, will develop collective motion, will be further suppressed or regenerated are still open questions that LHC data might re...

  15. Comparative performance of fluorescent iron-core ballasts and electronic ballasts. Rendement comparatif des ballasts a noyau de fer et des ballasts electroniques pour eclairage fluorescent

    Energy Technology Data Exchange (ETDEWEB)

    Pasini, I

    1987-01-01

    Commercially available one- and two-lamp fluorescent luminaires were tested, and a number of electrical parameters were measured using varying combinations of lamps and either iron-core or electronic ballasts. Comprehensive photometric tests and thermal measurements were also conducted. The test results were tabulated and compared. The performance of the iron-core ballasts was found to be sufficiently close to nominally rated values to not raise concerns. Results from testing the electronic ballasts showed that the user has to be careful when selecting these ballasts, as they far exceed standard specification limits for current and voltage crest factors. All other electrical, photometric and thermal parameters are within accepted levels. An economic analysis was undertaken to determine cost benefits and payback periods for using electronic ballasts, the use of which will result in higher efficiency and lower power consumption. A project life of 20 years was assumed, and analysis was run for a power cost of $0.04/kWh. A unit made by Fyrnetics showed the lowest total annual owning and operating costs and had a payback period of 12.1 years. 13 figs., 13 tabs.

  16. A theoretical and experimental investigation of propeller performance methodologies

    Science.gov (United States)

    Korkan, K. D.; Gregorek, G. M.; Mikkelson, D. C.

    1980-01-01

    This paper briefly covers aspects related to propeller performance by means of a review of propeller methodologies; presentation of wind tunnel propeller performance data taken in the NASA Lewis Research Center 10 x 10 wind tunnel; discussion of the predominent limitations of existing propeller performance methodologies; and a brief review of airfoil developments appropriate for propeller applications.

  17. Ageing and Performance Studies of the Outer Tracker of the LHCb Detector; Alterungsstudien und Studium der Betriebseigenschaften des Outer Trackers des LHCb Detektors

    Energy Technology Data Exchange (ETDEWEB)

    Haas, T.

    2007-11-07

    The Outer Tracker is part of the LHCb tracking system. It uses drift chamber to measure the track of a particle. The straws have a length of 2.5m and a diameter of 4.9 mm. They are operated in proportional mode and should measure tracks with a precision of 200 {mu}m per hit. In the first part, this thesis presents the results of a performance study for the Outer Tracker, focussing on spatial resolution and efficiency. The main part of this thesis deals with aging studies. Neither a test with 8 keV X-rays nor with highly ionising protons showed any change in the module behavior due to aging. The acceleration factors compared to LHCb were 8-180 (anode current >80 nA/cm) in the most irradiated areas. A charge of up to 3 C/cm was accumulated. Aging tests at anode currents below 15 nA/cm (acceleration factor 1) showed a significant gain drop for the already produced modules after only a few days (1-2 mC/cm) of irradiation. The aging depends on several parameters like gas flow velocity or gas mixture. There is no aging for anode currents >12 nA/cm. This aging is an effect of outgassing material used in the module. Tests showed that the outgassing is probably caused by the epoxy adhesive. Flushing and warming the modules reduce the aging significantly. As things are, the Outer Tracker modules can be operated in LHCb for several years. (orig.)

  18. Monitoring the thermal performance of a heat pump coupled to geothermal probes at Lugano (Switzerland); Mesure des performances thermiques d'une pompe a chaleur couplee sur des sondes geothermiques a Lugano (TI)

    Energy Technology Data Exchange (ETDEWEB)

    Pahud, D. [Scuola Universitaria Professionale della Svizzera Italiana (SUPSI), Laboratorio Energia Ecologia ed Economia (LEEE), Dipartimento Ambiente, Costruzioni e Design DACD, Trevano-Canobbio (Switzerland); Lachal, B. [Universite de Geneve, Centre Universitaire d' Etude des Problemes de l' Energie (CUEPE), Geneve (Switzerland)

    2004-07-01

    A heat pump system was experimentally investigated in a measuring campaign over two years and in additional dynamic system simulations using a model based on TRNSYS. The water-water heat pump delivers 14 kW thermal power at 0 {sup o}C/35 {sup o}C and uses 3 borehole heat exchangers of 80 m length each. It heats a single-family house of about 250 m{sup 2} of heated floor area, built in the 80es, which is also equipped with 7.8 m{sup 2} of solar collectors for hot water preparation. After two years of measurements, the thermal performances of the system are still very high and no performance decrease has been detected. The heat pump reaches quite a high seasonal performance factor of 4.1 to 4.2. A linear dependence between the monthly performance factor and the mean temperature difference between the heat carrier fluids circulating in the condenser and the evaporator has been identified.

  19. IRE (Institut National des Radioelements) site in Belgium. Report of in situ measurements and analyses performed for the RTBF; Site IRE (Institut National des Radioelements) en Belgique. Compte rendu des mesures in situ et analyses effectuees pour la RTBF

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-05-15

    This document reports various analyses performed within the frame of the preparation and filming of a TV documentary on the Belgium National Institute of Radio-elements. It reports gamma radiation measurements performed at the vicinity of the institute, discusses the possible origin of its increase at the vicinity of the institute, analyses of sludge samples coming from a wastewater treatment works, and analyses of milk, cabbage, mosses and sediments collected by residents

  20. Étude expérimentale des performances thermiques d’un nanofluide: eau-éthylène-glycol-Al2O3

    Directory of Open Access Journals (Sweden)

    Răzvan-Silviu Luciu

    2007-01-01

    Full Text Available Une nouvelle classe de fluides composée par des nanoparticules métalliques en suspension dans un liquide, appelée nanofluide, est apparue récemment. Quelques études numériques et expérimentales ont montré que ces nouveaux fluides possedent une puissance d’échange thermique remarquable, comparée aux liquides conventionnels. L’étude qui suit a le bout de montrer par voie expérimentale les performances thermiques d’un nanofluide composé d’oxyde d’alumine dispersé dans de l’éthylene-glycol en différentes concentrations, allant de 0 a 2%. Le dispositif expérimental est un échangeur a tubes concentriques en inox, avec écoulement du fluide chaud dans le tube central et du fluide froid dans le tube annulaire. Les résultats obtenus montrent que la présence des nanoparticules dans le fluide de base a pour effet une augmentation considérable du transfert thermique.

  1. Investigation of Malaysian Higher Education Quality Culture and Workforce Performance

    Science.gov (United States)

    Ali, Hairuddin Mohd; Musah, Mohammed Borhandden

    2012-01-01

    Purpose: The purpose of this study is to examine the relationship between the quality culture and workforce performance in the Malaysian higher education sector. The study also aims to test and validate the psychometric properties of the quality culture and workforce performance instruments used in the study. Design/methodology/approach: A total…

  2. Des cartes dans la classe…

    Directory of Open Access Journals (Sweden)

    R. Gimeno

    1990-09-01

    Full Text Available La majorité des enseignants qui veulent faire des cartes — et les faire réaliser aux élèves — pour répondre aux exigences des instructions officielles, doivent surmonter leur manque de compétences en cartographie et en didactique ainsi que les difficultés propres aux logiciels de cartographie encore peu performants. Ces compétences et la réflexion qui les accompagne sont pourtant accessibles aux enfants de l’école élémentaire…

  3. Comparaison des performances moteur à charge homogène et moteur à charge stratifiée Performance Comparison Between a Homogeneous-Charge Engine and a Stratified-Charge Engine.

    Directory of Open Access Journals (Sweden)

    Raynal B.

    2006-11-01

    Full Text Available Une évaluation des possibilités théoriques d'amélioration des moteurs actuels, faite par simulation mathématique du fonctionnement d'un moteur à allumage commandé, montre qu'un fonctionnement en mélange homogène pauvre permettrait de réduire de 16 % la consommation sur un cycle ECE chaud. Dans les mêmes conditions d'utilisation, un moteur « à charge stratifiée » idéal donnerait lieu à un gain de 41 %. Des modifications limitées du point de vue technologique ont été apportées à un moteur de série et ont permis d'étendre en mélange pauvre sa zone de fonctionnement. Les gains de consommation réalisés par rapport au moteur standard sont compris entre 5 et 10 %. Le recyclage d'une fraction modérée des gaz d'échappement permet de maintenir les émissions de NO x à moins de 5 g/essai sur cycle ECE, en conservant le gain de consommation précédent. L'analyse des performances d'un moteur Honda CVCC au banc d'essai et sur véhicule montre que les niveaux d'émissions relativement bas de ce type de moteur sont obtenus au prix d'une surconsommation importante par rapport à un véhicule équivalent équipé d'un moteur conventionnel. An evaluation of theoretical possibilities of improving existing engines, obtained by mathematical modelisation of a spark-ignition engine, shows that operating with a homogeneous lean mixture produces a 16 % reduction in consumption for a hot ECE cycle. Under the same running conditions, an ideal strotified-charge engine would produce a gain of 41 %.Limited technological modifications were made in a standard engine sa as ta extend its operating zone using a leon mixture. The consumption gains achieved compared with a standard engine are between 5 and 10%. The recycling of a moderate fraction of the exhaust gases enables NO, emissions ta be maintained at less than 5 g/test for an ECE cycle while preserving the preceding consumption gain.The performance analysis of a Honda C/CC engine on a test

  4. Investigations into the use of bacteria for enhanced recovery of petroleum; Untersuchungen zum Einsatz von Bakterien zur Erhoehung des Entoelungsgrades in Erdoellagerstaetten

    Energy Technology Data Exchange (ETDEWEB)

    Amro, M.

    1995-06-01

    Strains of bacteria were investigated with a view to their applicability and efficiency in enhanced recovery of petroleum. The mechanisms of enhanced recovery with bacteria were to be clarified as well. The experiments were carried out as static autoclave experiments without bedrock and as dynamic flooding experiments in a model pore space (Bentheim sandstone and carbonate rock) under the conditions of North German petroleum deposits. The static experiments carried out preliminary to the more time-consuming dynamic flooding experiments were to help with an optimized design of the injection experiments. (orig.) [Deutsch] Die vorliegende Arbeit hat zum Ziel, entoelungswirksame Bakterienstaemme zu untersuchen und hinsichtlich der durch sie bewirkten Erhoehung des Entoelungsgrades zu bewerten. Gleichzeitig sollen die Mechanismen aufgeklaert werden, die der Entoelungsverbesserung durch Einsatz von Bakterien zugrunde liegen. Die Experimente wurden als statische Autoklavenversuche ohne Lagerstaettengestein sowie als dynamische Flutversuche im Modellporenraum (Bentheimer Sandstein und karbonatisches Gesteinsmaterial) unter Bedingungen norddeutscher Lagerstaetten durchgefuehrt. Die statischen Versuche, die als Auswahltests den aufwendigeren dynamischen Flutversuchen vorgeschaltet waren, sollten dazu beitragen, die Flutversuche gezielt konzipieren zu koennen. (orig./EF)

  5. investigation of fouling effect on overall performance of shell

    African Journals Online (AJOL)

    eobe

    Two different heat exchanger units (cold gas pre-heater and heater and ... operational log book, periodic maintenance data sheet and vendor' design data sheet. The data were ... in recent years on performance evaluation methods of.

  6. Investigation de fluides électrorhéologiques sur la base des matériaux hybrides

    OpenAIRE

    Marins , Jéssica Alves ,

    2014-01-01

    Electrorheology is an area has been exploring the application of these organic-inorganic hybrid compounds, to obtain better performance in electrorheological properties. Electro-rheological fluids consist of a colloidal dispersion, where the liquid is non-conductive and the particles dispersed in the fluid are able of polarized at presence of electric field. When the fluids ER are subjected to an external electric field the rheological properties change, and may increase or decrease the appar...

  7. Firm Financial Performance: An Empirical Investigation on Romanian SMEs

    OpenAIRE

    Ionescu Alexandra; Horga Maria-Gabriela; Nancu Dorinela

    2013-01-01

    Firm's financial performance is reflected by its profit and loss account. Still, all financial statements are needed in order to have a complete view on a firm's financial performance. As a general rule, several financial indicators are calculated in this sense. Hence, it would be of great interest to reduce the number of financial indicators into fewer, more synthetic ones. However, the new indicators should reflect the same information as the first ones. Statistics offers this possibility t...

  8. Age, psychological skills, and golf performance: a prospective investigation.

    Science.gov (United States)

    Hayslip, Bert; Petrie, Trent A

    2014-03-01

    This study explored the influence of age in understanding mental skills utilization in the context of performance at a major national golf competition. Participants, who ranged in age and in skill level, included 1150 male and 170 female amateur golfers competing in the Dupont World Amateur Golf Championship in Myrtle Beach, South Carolina. Measures targeted general mental skills used in competitions, golf-specific skills, and competitive trait anxiety. Hierarchical linear regression was utilized to explore the potential moderating role that chronological age may play in influencing the impact of psychological skills and anxiety on competitive tournament performance across the adult life span. Findings suggested no significant age-moderating effects and instead pointed to the importance of developing golf-specific psychological skills to enhance or maintain performance, irrespective of age. Although automaticity (performance feels "automatic") predicted performance for all golfers, commitment to the game and confidence in one's putting did so only for the men. These findings reinforce the age-irrelevant role of such skills in fostering the experience of peak performance in a competitive sport context and underscore the importance of interventions targeting older players to help maintain or facilitate the use of psychological skills in helping them manage their games.

  9. Experimental investigation and modeling of dynamic performance of wave springs

    OpenAIRE

    Tang, N.; Rongong, J.; Lord, C.; Sims, N.

    2016-01-01

    This paper investigates vibration suppression potentials for a novel frictional system - a wave spring.\\ud Two different types of wave springs, crest-to-crest and nested ones, were used in this work. Compared with\\ud nested wave springs, crest-to-crest wave springs have lower damping and a larger range for the linear stiffness\\ud due to a reduced level of contact. Dynamic compressive tests, subject to different static compression levels,\\ud are carried out to investigate the force-displacemen...

  10. Performance investigation on DCSFCL considering different magnetic materials

    Science.gov (United States)

    Yuan, Jiaxin; Zhou, Hang; Zhong, Yongheng; Gan, Pengcheng; Gao, Yanhui; Muramatsu, Kazuhiro; Du, Zhiye; Chen, Baichao

    2018-05-01

    In order to protect high voltage direct current (HVDC) system from destructive consequences caused by fault current, a novel concept of HVDC system fault current limiter (DCSFCL) was proposed previously. Since DCSFCL is based on saturable core reactor theory, iron core becomes the key to the final performance of it. Therefore, three typical kinds of soft magnetic materials were chosen to find out their impact on performances of DCSFCL. Different characteristics of materials were compared and their theoretical deductions were carried out, too. In the meanwhile, 3D models applying those three materials were built separately and finite element analysis simulations were performed to compare these results and further verify the assumptions. It turns out that materials with large saturation flux density value Bs like silicon steel and short demagnetization time like ferrite might be the best choice for DCSFCL, which can be a future research direction of magnetic materials.

  11. Compact models and performance investigations for subthreshold interconnects

    CERN Document Server

    Dhiman, Rohit

    2014-01-01

    The book provides a detailed analysis of issues related to sub-threshold interconnect performance from the perspective of analytical approach and design techniques. Particular emphasis is laid on the performance analysis of coupling noise and variability issues in sub-threshold domain to develop efficient compact models. The proposed analytical approach gives physical insight of the parameters affecting the transient behavior of coupled interconnects. Remedial design techniques are also suggested to mitigate the effect of coupling noise. The effects of wire width, spacing between the wires, wi

  12. Forensic investigation into the performance of hot-mix asphalt

    CSIR Research Space (South Africa)

    Denneman, E

    2008-05-01

    Full Text Available the rutting and fatigue behaviour of HMA wearing courses in South Africa. The findings of the forensic investigation were used, in conjunction with the outcomes of a state of the art survey, to define the scope of a multi-year HMA research programme currently...

  13. Investigating Performance of Vertical Carbonizing Kiln for Briquette

    African Journals Online (AJOL)

    BELAYADDIS

    was investigated via studying the effects of air flow rate, air contact ... atmospheric pressure and use wood as a feedstock [4, 5]. .... discharging the exhaust gas. The stand made ... pipe for regulating and measuring the amount of air introduced ...

  14. Visual Investigation of Retrograde Phenomena and Gas Condensate Flow in Porous Media Étude visuelle des phénomènes rétrogrades et de l'écoulement des gaz de condensat en milieux poreux

    Directory of Open Access Journals (Sweden)

    Danesh A.

    2006-11-01

    Full Text Available The mechanism of retrograde condensation and the flow of gas-condensate in horizontal porous media under simulated reservoir conditions were visually studied. Two-dimensional glass micromodels with homogeneous pore structures, as well as heterogeneous patterns, reproduced from real rock micrographs were employed in this study. Depletion tests were carried out using synthetic multicomponent hydrocarbon gas mixtures and also a North Sea gas condensate. The multiphase flow behaviour of the tested systems, as observed and recorded on video, is presented here along with the measured data. In water-wet pores, condensate was observed to be formed as a continuous thin film on connate water, which was the preferred site for condensation. Pressure reduction below the system cricondenbar resulted in the growth of the condensate almost exclusively on water rings at pore throats and dead end pores. The condensate was observed to flow through thin films even at low saturations, with little contribution to the condensate recovery. The rate of pressure depletion influenced the gas flow shear and was found to strongly affect the condensate propagation. Local instabilities could promote significant condensate movement in pore sections which would only be retarded further downstream by capillary effects diminishing the condensate recovery. Relative permeability-saturation relation-ships for gas-condensate flow should not be expected to take the same form as the oil-gas relative permeability for solution gas or external gas drive. Le mécanisme de la condensation rétrograde et l'écoulement des gaz de condensat en milieu poreux horizontal dans une simulation des conditions naturelles ont fait l'objet d'études visuelles. Des micromodèles en verre bi-dimensionnels à structure poreuse homogène, et des éléments hétérogènes reproduisant des micrographies de roches réelles, ont été utilisés pour cette étude. Des essais d'épuisement ont été effectu

  15. Investigation of human-robot interface performance in household environments

    Science.gov (United States)

    Cremer, Sven; Mirza, Fahad; Tuladhar, Yathartha; Alonzo, Rommel; Hingeley, Anthony; Popa, Dan O.

    2016-05-01

    Today, assistive robots are being introduced into human environments at an increasing rate. Human environments are highly cluttered and dynamic, making it difficult to foresee all necessary capabilities and pre-program all desirable future skills of the robot. One approach to increase robot performance is semi-autonomous operation, allowing users to intervene and guide the robot through difficult tasks. To this end, robots need intuitive Human-Machine Interfaces (HMIs) that support fine motion control without overwhelming the operator. In this study we evaluate the performance of several interfaces that balance autonomy and teleoperation of a mobile manipulator for accomplishing several household tasks. Our proposed HMI framework includes teleoperation devices such as a tablet, as well as physical interfaces in the form of piezoresistive pressure sensor arrays. Mobile manipulation experiments were performed with a sensorized KUKA youBot, an omnidirectional platform with a 5 degrees of freedom (DOF) arm. The pick and place tasks involved navigation and manipulation of objects in household environments. Performance metrics included time for task completion and position accuracy.

  16. Mindfulness Enhances Episodic Memory Performance: Evidence from a Multimethod Investigation.

    Directory of Open Access Journals (Sweden)

    Kirk Warren Brown

    Full Text Available Training in mindfulness, classically described as a receptive attentiveness to present events and experiences, has been shown to improve attention and working memory. Both are key to long-term memory formation, and the present three-study series used multiple methods to examine whether mindfulness would enhance episodic memory, a key form of long-term memory. In Study 1 (N = 143, a self-reported state of mindful attention predicted better recognition performance in the Remember-Know (R-K paradigm. In Study 2 (N = 93, very brief training in a focused attention form of mindfulness also produced better recognition memory performance on the R-K task relative to a randomized, well-matched active control condition. Study 3 (N = 57 extended these findings by showing that relative to randomized active and inactive control conditions the effect of very brief mindfulness training generalized to free-recall memory performance. This study also found evidence for mediation of the mindfulness training-episodic memory relation by intrinsic motivation. These findings indicate that mindful attention can beneficially impact motivation and episodic memory, with potential implications for educational and occupational performance.

  17. Mindfulness Enhances Episodic Memory Performance: Evidence from a Multimethod Investigation.

    Science.gov (United States)

    Brown, Kirk Warren; Goodman, Robert J; Ryan, Richard M; Anālayo, Bhikkhu

    2016-01-01

    Training in mindfulness, classically described as a receptive attentiveness to present events and experiences, has been shown to improve attention and working memory. Both are key to long-term memory formation, and the present three-study series used multiple methods to examine whether mindfulness would enhance episodic memory, a key form of long-term memory. In Study 1 (N = 143), a self-reported state of mindful attention predicted better recognition performance in the Remember-Know (R-K) paradigm. In Study 2 (N = 93), very brief training in a focused attention form of mindfulness also produced better recognition memory performance on the R-K task relative to a randomized, well-matched active control condition. Study 3 (N = 57) extended these findings by showing that relative to randomized active and inactive control conditions the effect of very brief mindfulness training generalized to free-recall memory performance. This study also found evidence for mediation of the mindfulness training-episodic memory relation by intrinsic motivation. These findings indicate that mindful attention can beneficially impact motivation and episodic memory, with potential implications for educational and occupational performance.

  18. A Cross-Cultural Investigation of Human Performance Technology Interventions

    Science.gov (United States)

    Vadivelu, Ramaswamy N.

    2010-01-01

    Human Performance Technology (HPT) is a field of practice that has evolved from advancements in organizational development, instructional design, strategic human resource management and cognitive psychology. As globalization and trends like outsourcing and off-shoring start to dominate the way organizations grow, HPT practitioners are managing the…

  19. Investigation of Thermal Performance for Atria: a Method Overview

    Directory of Open Access Journals (Sweden)

    Moosavi Leila

    2016-01-01

    Full Text Available The importance of low energy design in large buildings has encouraged researchers to implement different methods for predicting a building’s thermal performance. Atria, as energy efficient features, have been implemented to improve the indoor thermal environment in large modern buildings. Though widely implemented, the thorough study of atrium performance is restricted due to its large size, complex thermodynamic behavior and the inaccuracies and limitations of available prediction tools. This study reviews the most common research tools implemented in previous researches on atria thermal performance, to explore the advantages and limitation of different methods for future studies. The methods reviewed are analytical, experimental, computer modelling and a combination of any or all of these methods. The findings showed that CFD (computational fluid dynamic models are the most popular tools of recent due to their higher accuracy, capabilities and user-friendly modification. Although the experimental methods were reliable for predicting atria thermal and ventilation performance, they have mostly been used to provide data for validation of CFD models. Furthermore, coupling CFD with other experimental models could increase the reliability and accuracy of the models and provide a more comprehensive analysis.

  20. An Empirical Investigation of MPA Student Performance and Admissions Criteria

    Science.gov (United States)

    Ragothaman, Srinivasan; Carpenter, Jon; Davies, Thomas

    2009-01-01

    The quality of a Master of Professional Accountancy (MPA) program, similar to other undergraduate and graduate programs in business and other disciplines, is typically directly related to the quality of its students. While there is a considerable published scholarly work on MBA student performance, there is very little research to predict student…

  1. An investigation into the determinants of business performance in ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    High-performing businesses are currently seen as a source of job and wealth creation, essential elements of a strategy for inclusive growth. This project aims to contribute to a better understanding of the determinants of business productivity in Francophone Africa. Findings will offer further insights for policymakers looking to ...

  2. Investigations on dairy welfare and performance on German organic farms

    OpenAIRE

    Hoerning, Bernhard; Simantke, Christel; Aubel, Erhard

    2005-01-01

    An investigation was carried out on 74 organic dairy farms in Germany. Results were an average milk production of 5.960 kg, 223.000 somatic cell counts (SCC), 387 days calving interval, 23.5 % culling rate, 46 Euro annual veterinary costs per cow. Farmers were asked for disease incidences. Cows were scored for injuries and body condition. The results were combined with possible influencing factors (herd size, breed, region, farming association, housing system, housing factors, amounts of conc...

  3. Investigation of Concrete Electrical Resistivity As a Performance Based Test

    OpenAIRE

    Malakooti, Amir

    2017-01-01

    The purpose of this research project was to identify the extent that concrete resistivity measurements (bulk and/or surface) can be used as a performance based lab test to improve the quality of concrete in Utah bridge decks. By allowing UDOT to specify a required resistivity, concrete bridge deck quality will increase and future maintenance costs will decrease. This research consisted of two phases: the field phase and the lab phase. In the field phase, concrete samples were gathered from...

  4. Physiological Investigation of Localized Temperature Effects on Vigilance Performance

    Science.gov (United States)

    2014-03-27

    Lazarus & Folkman , 1984). Past research has shown that people who are challenged perform better on tasks than those who are threatened (Tomaka et al...Cues to Enhance Screener Vigilance (Doctoral dissertation, University of Arizona). Lazarus , R. S., & Folkman , S. (1984). Stress, appraisal, and...Jouanin, J. C., Philippe, M., & Guezennec, C. Y . (2005). EEG and ECG changes during simulator operation reflect mental workload and vigilance

  5. Experimental and Numerical Investigation on Tribological Performance of Grooved Texture

    Directory of Open Access Journals (Sweden)

    CHEN Ping

    2016-06-01

    Full Text Available In order to study the influence of the angle and arrangement forms of micro-grooves on the tribological performance of the contact surface, the finite element analysis software was used to simulate the grooved textures with different angles and arrangements. The YLP-20 laser processing system was used to process grooved texture on stainless steel disk surfaces, and the Tribometer (UMT-2 was also used to conduct tribological test under the condition of rotation. The results show that the numerical simulation values are basically consistent with experimental results of grooved textures, and the tribological performance of the friction pairs with textures is also improved. The grooved textures with different angles and arrangement forms have different influence on tribological performance of friction pairs. When the friction velocity is less than 300r/min, the parallel texture with 0° has smaller friction coefficients. While the friction velocity is larger than 300r/min, the parallel texture with 90° has a better ability of reducing friction. Therefore, different grooved textures should be chosen according to operation conditions.

  6. Performance investigation on the ultrasonic atomization liquid desiccant regeneration system

    International Nuclear Information System (INIS)

    Yang, Zili; Zhang, Kaisheng; Hwang, Yunho; Lian, Zhiwei

    2016-01-01

    Highlights: • We applied ultrasonic atomization technology to boost liquid desiccant regeneration. • We established a novel UARS and made a thorough study on its performance. • We developed a performance prediction model for UARS and validated its accuracy. • The necessary regeneration temperature dropped significantly (4.4 °C) in UARS. • Energy consumption for regenerating desiccant was reduced greatly (60.4%) in UARS. - Abstract: Liquid desiccant dehumidification systems have accumulated considerable research interest in recent years for their great energy saving potential in buildings. Within the system, the regenerator recovering liquid desiccant plays a major role in its performance. When the ultrasonic atomization technology is applied to atomize the desiccant solution into numerous tiny droplets with diameters around 50 μm, the regeneration process could be greatly enhanced. To validate this approach, a novel ultrasonic atomization liquid desiccant regeneration system (UARS) was studied in this work. An Ideal Regeneration Model (IRM) was developed to predict the regeneration performance of the UARS. Additionally, thorough experiments were carried out to validate the model under different operating conditions of the desiccant solution and air stream. The model predicted values and the experimental results coincided, with the average deviation less than 7.9%. The performance of UARS was compared with other regeneration systems from the open literature, while a case study was conducted for the power consumption and energy saving potential of UARS. It was found that the ultrasonic atomization technology enabled utilization of lower-grade energy for desiccant regeneration with the regeneration temperature lowered as much as 4.4 °C. In addition, a considerable energy saving potential of up to 23.4% could be achieved by the UARS for regenerating per unit mass flow of desiccant solution, while the power consumption of the ultrasonic atomization system

  7. Performance Analysis of Compositional and Modified Black-Oil Models For a Gas Lift Process Analyse des performances de modèles black-oil pour le procédé d’extraction par injection de gaz

    Directory of Open Access Journals (Sweden)

    Mahmudi M.

    2013-03-01

    galement atteinte, avec un coût minimum du calcul, par l’utilisation de modèles modifiés de type black- oil des fluides. Le modèle modifié de black-oil est un outil performant dans le cas où un nombre élevé d’itérations du modèle est nécessaire pour trouver les combinaisons optimales des paramètres du procédé d’extraction par injection de gaz.

  8. Investigation of ADAMO performance in the ZEUS calorimeter reconstruction program

    International Nuclear Information System (INIS)

    Kowalski, H.; Poser, T.; Stanco, L.; Tscheslog, E.

    1989-01-01

    The ADAMO package has been investigated for the reconstruction of jets simulated in the ZEUS calorimeter. The feasibility of ADAMO routines was tested under various aspects. The study was based on different versions of a cluster algorithm using ADAMO tools or direct BOS memory management tools. In particular, the amount of CPU time needed by each of the versions was determined. Results are quite promising and support an extensive use of the ADAMO package in the software development of high energy physics experiments. (orig.)

  9. Investigation of Floor Surface Finishes for Optimal Slip Resistance Performance

    Directory of Open Access Journals (Sweden)

    In-Ju Kim

    2018-03-01

    Full Text Available Background: Increasing the slip resistance of floor surfaces would be desirable, but there is a lack of evidence on whether traction properties are linearly correlated with the topographic features of the floor surfaces or what scales of surface roughness are required to effectively control the slipperiness of floors. Objective: This study expands on earlier findings on the effects of floor surface finishes against slip resistance performance and determines the operative ranges of floor surface roughness for optimal slip resistance controls under different risk levels of walking environments. Methods: Dynamic friction tests were conducted among three shoes and nine floor specimens under wet and oily environments and compared with a soapy environment. Results: The test results showed the significant effects of floor surface roughness on slip resistance performance against all the lubricated environments. Compared with the floor-type effect, the shoe-type effect on slip resistance performance was insignificant against the highly polluted environments. The study outcomes also indicated that the oily environment required rougher surface finishes than the wet and soapy ones in their lower boundary ranges of floor surface roughness. Conclusion: The results of this study with previous findings confirm that floor surface finishes require different levels of surface coarseness for different types of environmental conditions to effectively manage slippery walking environments. Collected data on operative ranges of floor surface roughness seem to be a valuable tool to develop practical design information and standards for floor surface finishes to efficiently prevent pedestrian fall incidents. Keywords: floor surface finishes, operational levels of floor surface roughness, slip resistance, wet, soapy and oily environments

  10. COMPASS: A source term code for investigating capillary barrier performance

    International Nuclear Information System (INIS)

    Zhou, Wei; Apted, J.J.

    1996-01-01

    A computer code COMPASS based on compartment model approach is developed to calculate the near-field source term of the High-Level-Waste repository under unsaturated conditions. COMPASS is applied to evaluate the expected performance of Richard's (capillary) barriers as backfills to divert infiltrating groundwater at Yucca Mountain. Comparing the release rates of four typical nuclides with and without the Richard's barrier, it is shown that the Richard's barrier significantly decreases the peak release rates from the Engineered-Barrier-System (EBS) into the host rock

  11. Further investigation on the performance of a shower cooling tower

    International Nuclear Information System (INIS)

    Qi Xiaoni; Liu Zhenyan

    2008-01-01

    This study was prompted by the need to design towers for applications in which, due to salt deposition on the packing and subsequent blockage, the use of tower packing is not practical. In the previous model we presented [Qi Xiaoni, Liu Zhenyan, Li Dandan. Performance characteristics of a shower cooling tower. Energy Convers Manage 2007;48(1):193-203.], three critical assumptions were made to reduce the complexity and computational time, which can also reduce the models' accuracy. Accurate modelling of the operating process is a determining factor both for designing the shower cooling tower (SCT) and for optimising its operation. In this paper, we derive a new model without applying the three assumptions. According to the condition of the outlet air, the governing equations consider two cases, including the supersaturated and unsaturated states. This model is used to predict the performance of a full scale SCT located in China with different conditions for validation. The differences in the heat and mass transfer analyses of the two models are described at different atmospheric conditions

  12. Investigation into the performance of different models for predicting stutter.

    Science.gov (United States)

    Bright, Jo-Anne; Curran, James M; Buckleton, John S

    2013-07-01

    In this paper we have examined five possible models for the behaviour of the stutter ratio, SR. These were two log-normal models, two gamma models, and a two-component normal mixture model. A two-component normal mixture model was chosen with different behaviours of variance; at each locus SR was described with two distributions, both with the same mean. The distributions have difference variances: one for the majority of the observations and a second for the less well-behaved ones. We apply each model to a set of known single source Identifiler™, NGM SElect™ and PowerPlex(®) 21 DNA profiles to show the applicability of our findings to different data sets. SR determined from the single source profiles were compared to the calculated SR after application of the models. The model performance was tested by calculating the log-likelihoods and comparing the difference in Akaike information criterion (AIC). The two-component normal mixture model systematically outperformed all others, despite the increase in the number of parameters. This model, as well as performing well statistically, has intuitive appeal for forensic biologists and could be implemented in an expert system with a continuous method for DNA interpretation. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  13. Investigating a Link Between Knowledge Management and NPP Organizational Performance

    International Nuclear Information System (INIS)

    Grosbois, J. de

    2011-01-01

    Effective knowledge management (KM) enhances a firm's capability to assimilate, create and exploit knowledge. KM is widely recognized in both the management literature and in practice as an important enabler of long term organizational performance. Its role is particularly important in technology intensive industries such as the nuclear power industry. Various nuclear power plants (NPPs) around the globe have begun to recognize the strategic importance of KM initiatives in achieving sustained high levels of operational performance. Although these organizations have been involved in KM-related activities for some time, they typically have not viewed and managed these activities from a KM perspective. Several NPPs have been early adopters of KM practices in the nuclear industry, and have been proactive in implementing company-wide KM programmes. However, at most NPPs, the concepts and benefits of KM are only beginning to be understood and have yet to be applied. Atomic Energy Canada Ltd. (AECL) undertook a research project entitled Knowledge Management (KM) for Nuclear Power Plants (NPPs), which formed part of the IAEA's Coordinated Research Project (CRP) on Comparative Analysis of Methods and Tools for Nuclear Knowledge Preservation. The programme scope of work included the following activities: conducting a literature review, participation in IAEA KM meetings and Assist Visits to NPPs, development of an industry survey, peer review and trial of the survey, and preparation of a summary report. This paper summarizes findings of the research done at AECL under this CRP.

  14. Investigation of grid performance using simple image quality tests

    Directory of Open Access Journals (Sweden)

    Dogan Bor

    2016-01-01

    Full Text Available Antiscatter grids improve the X-ray image contrast at a cost of patient radiation doses. The choice of appropriate grid or its removal requires a good knowledge of grid characteristics, especially for pediatric digital imaging. The aim of this work is to understand the relation between grid performance parameters and some numerical image quality metrics for digital radiological examinations. The grid parameters such as bucky factor (BF, selectivity (Σ, Contrast improvement factor (CIF, and signal-to-noise improvement factor (SIF were determined following the measurements of primary, scatter, and total radiations with a digital fluoroscopic system for the thicknesses of 5, 10, 15, 20, and 25 cm polymethyl methacrylate blocks at the tube voltages of 70, 90, and 120 kVp. Image contrast for low- and high-contrast objects and high-contrast spatial resolution were measured with simple phantoms using the same scatter thicknesses and tube voltages. BF and SIF values were also calculated from the images obtained with and without grids. The correlation coefficients between BF values obtained using two approaches (grid parameters and image quality metrics were in good agreement. Proposed approach provides a quick and practical way of estimating grid performance for different digital fluoroscopic examinations.

  15. Evaluation des bibliothèques HES, sélection et définition d'indicateurs de performance et de qualité: répondre à une directive

    OpenAIRE

    Bezençon, Christophe; Gorin, Michel

    2009-01-01

    La Commission spécialisée des bibliothèques HES (CBH), organe de la Conférence des recteurs d es hautes écoles spécialisées suisses (KFH), a identifié la nécessité, dans le contexte académique actuel, de joindre à son projet de Directive pour la bibliothèque HES une collection d’indicateurs de performance et de qualité pour permettre aux bibliothèques de mesurer leur degré d’accomplissement des exigences issues de cette Directive. La sélection, la définition et l’explicitation de ces indicate...

  16. The ongoing investigation of high performance parallel computing in HEP

    CERN Document Server

    Peach, Kenneth J; Böck, R K; Dobinson, Robert W; Hansroul, M; Norton, Alan Robert; Willers, Ian Malcolm; Baud, J P; Carminati, F; Gagliardi, F; McIntosh, E; Metcalf, M; Robertson, L; CERN. Geneva. Detector Research and Development Committee

    1993-01-01

    Past and current exploitation of parallel computing in High Energy Physics is summarized and a list of R & D projects in this area is presented. The applicability of new parallel hardware and software to physics problems is investigated, in the light of the requirements for computing power of LHC experiments and the current trends in the computer industry. Four main themes are discussed (possibilities for a finer grain of parallelism; fine-grain communication mechanism; usable parallel programming environment; different programming models and architectures, using standard commercial products). Parallel computing technology is potentially of interest for offline and vital for real time applications in LHC. A substantial investment in applications development and evaluation of state of the art hardware and software products is needed. A solid development environment is required at an early stage, before mainline LHC program development begins.

  17. Investigation into the heat transfer performance of helically ribbed surfaces

    International Nuclear Information System (INIS)

    Firth, R.J.

    1981-12-01

    The first part of an investigation into flow and heat transfer in annular channels and seven pin clusters is described. One of the main aims of the project is to improve cluster heat transfer prediction codes for helically ribbed surfaces. A study is made of the heat transfer and flow characteristics of a helically ribbed pin in an annular channel. It is shown that the swirling flow, which is induced by the helical ribs, gives rise to substantially enhanced diffusivity levels. This phenomenon had not been taken into account by previous analysis techniques. The methods for analysing heat transfer and pressure drop data from annular channels which were originally developed for non-swirling flow are generalised to accommodate swirling flow. The new methods are shown to be consistent with empirical data. Roughness parameter data is presented for helically ribbed surfaces with an axial rib pitch into height ratio of about 7. (author)

  18. EXPERIMENTAL INVESTIGATION OF SOLAR POND PERFORMANCE IN KARABUK ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Mehmet ÖZKAYMAK

    2004-01-01

    Full Text Available The solar energy, one of the alternative energy sources, can be economically and cheaply and efficiently collected with solar ponds. In this study, varying concentrations of sodium carbonate dilution in the solar pond in terms of heat storage performance has been examined. Experiment apparatus has been located Zonguldak Karaelmas University Karabük Technical Education Faculty. Five experiments with different density levels have been done and the changes in the temperature and density have been presented graphically within the solar pond. The experiments show that the temperature difference between the bottom and top level of solar pond is max. 21 °C and the highest temperature in lower convective zone (LCZ has been measured as 49 °C.

  19. Use of Isotopes for Investigating the Behaviour and Ecology of Insect Pests in Some Recent Studies; Emploi des radioisotopes dans des recherches recentes sur le comportement et l'ecologie des insectes nuisibles; Ispol'zovanie radioizotopov dlya issledovaniya povedeniya i ehkologii nasekomykh-vreditelej v Irane; Empleo de isotopos en estudios recientes sobre el comportamiento y la ecologia de las plagas insectiles

    Energy Technology Data Exchange (ETDEWEB)

    Quraishi Sayeed, M. [Cento Institute of Nuclear Science, Teheran (Iran, Islamic Republic of)

    1963-09-15

    Investigations into the ecology, behaviour, dispersal and longevity of insects have always provided challenges to the entomologist. The use of isotopes is an effective tool and the following is a report on some interesting problems solved by their application. Anopheles stephensi is the main vector o f malaria in southern Iran. On P{sup 32}-labelled mosquitoes, the dispersal, behaviour, digestion of blood meal, maturation of ovaries and length of gonotrophic cycles were successfully worked out. It was found that in about 80% of the cases the mosquito needed two blood meals for the completion of the first cycle. The first cycle itself was completed in 4-5 d depending upon the temperature. Labelled mosquitoes which had emerged overnight were released in an isolated village. The ratio of active mosquitoes to total catch was worked out every day and thus, on the assumption that the natural population remained constant, the mortality rate, which was found to be exponential for the first six days, was worked out. The mating behaviour of the female was also studied by using normal females which had mated once with P{sup 32}-labelled males. It was found that the female mates more than once and that after mating with an active male, the spermathead became active. Counts of up to twice the background (12 counts/min) were obtained by using males giving about 15 000 counts/min. Studies of the injection of saliva in glucose solution during feeding were also made on P{sup 32}-labelled mosquitoes. Eurygaster integriceps is a serious pest of wheat in Iran, Pakistan and the Middle East. Using P{sup 32} activated wheat plants, the feeding behaviour of the first-instar nymph was investigated. Other foods, radioactively labelled, were also studied and it was found that feeding was essential for the first moult, even if the food consisted of water absorbed in a filter paper. (author) [French] Les recherches sur l'ecologie, le comportement, la dispersion et la longevite des insectes ont

  20. Investigation of the Performance of an Inductive Seawater Conductivity Sensor

    Directory of Open Access Journals (Sweden)

    WU Sheng

    2015-03-01

    Full Text Available As one of the factors in marine hydrographic survey, seawater salinity plays an important role in marine scientific research, marine exploitation and military defense. In practical measurement, the salinity is always presented indirectly by seawater conductivity value. Compared with the electrode conductivity sensors, inductive conductivity sensors have an advantage of anti-biofouling, and that is very interested in long term ocean observation device. From the principle point of view, this paper discus the different methods to improve inductive sensor output signal, which is confirmed by the relative experimental results. The basic working system of inductive sensor is described here as well as a calibration in standard seawater. From a wide range of temperature, measurement absolute error and stability are close to those of actual electrode conductivity sensors. Furthermore, in the 1000 meters deep sea experiment, our inductive sensor presents a perfect similarity of conductivity profile like sea- bird sensor, even for some small variations. The performance of our inductive sensor can compete with that of commercially available electrode conductivity sensors.

  1. Investigation of road network features and safety performance.

    Science.gov (United States)

    Wang, Xuesong; Wu, Xingwei; Abdel-Aty, Mohamed; Tremont, Paul J

    2013-07-01

    The analysis of road network designs can provide useful information to transportation planners as they seek to improve the safety of road networks. The objectives of this study were to compare and define the effective road network indices and to analyze the relationship between road network structure and traffic safety at the level of the Traffic Analysis Zone (TAZ). One problem in comparing different road networks is establishing criteria that can be used to scale networks in terms of their structures. Based on data from Orange and Hillsborough Counties in Florida, road network structural properties within TAZs were scaled using 3 indices: Closeness Centrality, Betweenness Centrality, and Meshedness Coefficient. The Meshedness Coefficient performed best in capturing the structural features of the road network. Bayesian Conditional Autoregressive (CAR) models were developed to assess the safety of various network configurations as measured by total crashes, crashes on state roads, and crashes on local roads. The models' results showed that crash frequencies on local roads were closely related to factors within the TAZs (e.g., zonal network structure, TAZ population), while crash frequencies on state roads were closely related to the road and traffic features of state roads. For the safety effects of different networks, the Grid type was associated with the highest frequency of crashes, followed by the Mixed type, the Loops & Lollipops type, and the Sparse type. This study shows that it is possible to develop a quantitative scale for structural properties of a road network, and to use that scale to calculate the relationships between network structural properties and safety. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. ANALYSE DES PERCEPTIONS LOCALES ET DES FACTEURS ...

    African Journals Online (AJOL)

    AISA

    1Faculté des Sciences Agronomiques (FSA), Université d'Abomey-Calavi (UAC), 01 BP 526 Cotonou Bénin. Email : cgbemavo@yahoo.fr. 2Institut National des Recherches Agricoles du Bénin, Centre de Recherches Agricoles d'Agonkanmey (CRA-A),. Laboratoire des Sciences du Sol, Eau et Environnement (LSSEE).

  3. L’effet de la personnalité sur la performance des étudiants universitaires en sciences de l’administration à l’examen écrit, au test à choix multiple et aux travaux pratiques

    Directory of Open Access Journals (Sweden)

    Sawsen Lakhal

    2017-03-01

    Full Text Available Plusieurs programmes universitaires en sciences de l’administration au Canada ont implanté des réformes majeures, suite aux demandes des organismes d’agrément tels que l’Association to Advance Collegiate Schools of Business (AACSB. Conséquemment, de plus en plus de méthodes d’évaluation des apprentissages sont utilisées. Toutefois, l’introduction de ces méthodes dans les programmes d’études pourrait engendrer des biais aux résultats de l’évaluation des apprentissages. L’étude des facteurs pouvant avoir un effet sur la performance des étudiants aux différentes méthodes d’évaluation devient pertinente dans ce contexte. Ainsi, l’objectif de cette étude consiste à vérifier si la personnalité telle que définie par le modèle des cinq facteurs influence la performance à l’examen écrit, au test à choix multiples et aux travaux pratiques. Deux variables contrôle, le genre et l’âge, sont inclus dans les analyses. Un échantillon de 378 étudiants inscrits à un cours de premier cycle universitaire en sciences de l’administration a répondu à un questionnaire en ligne. Les résultats des analyses des régressions linéaires multiples indiquent que ce ne sont pas toujours les mêmes facteurs de la personnalité qui sont sollicités d’une méthode d’évaluation à l’autre, indiquant l’existence potentielle de biais à l’évaluation des apprentissages. Ces résultats sont discutés au regard de la littérature plus large dans le domaine et touchant à d’autres programmes d’études universitaires. In Canada, a number of university programs in business administration have imbedded major reforms, following requests from accreditation bodies such as the Association to Advance Collegiate Schools of Business (AACSB. Consequently, more and more learning assessment methods are used. However, the introduction of these methods in curricula could lead to bias to the results of learning assessment. In

  4. Experimental investigations on inlet flow of ducted turbines. A contribution to turbine intake optimization; Experimentelle Untersuchungen zur Anstroemung von Rohrturbinen. Ein Beitrag zur Optimierung des Turbineneinlaufes

    Energy Technology Data Exchange (ETDEWEB)

    Godde, D. [Technische Univ. Muenchen, Obernach (Germany). Versuchsanstalt fuer Wasserbau und Wasserwirtschaft (Oskar-von-Miller-Institut)

    1994-12-31

    In the borderline region between hydraulic engineering and turbine technology, a wide range of conjectures on cause-effect relationships in connection with turbine inflow have existed for quite some time. It is remarkable that these conjectures, which are partly based on observations and `a feeling for hydraulics`, have not as yeet been subject to scientific scrutiny. This is more the remarkable when one considers the requirements specified by turbine manufacturers concerning the quality of the intake flow based upon such uncertain conjectures. However, extensive contructional measures are sometimes necessary to satisfy these requirements, which are also formulated in general terms in numerous publications. Within the scope of this treatise the new investigations in this field - at a model and a turbine test rig - concentrate on the separating pier, the trash rack and the adjoining convergence channel in the intake region of bulb turbines. The experimental results serve to clarify a number of relationships, partly negate or confirm previous assumptions and relativize some of the requirements. Although the results must be assessed in the light of model-specific restrictions and the characteristics of the turbines tested, they are nevertheless generally applicable to a certain degree owing to the wide scope of the investigations. (AKF) [Deutsch] Im Grenzbereich zwischen Wasserbau und Turbinentechnologie besteht seit geraumer Zeit zu Fragen der Turbinenanstroemung eine Reihe von Vermutungen ueber Ursache-Wirkung-Zusammenhaenge. Es ist bemerkenswert, dass diese zum Teil auf Beobachtungen und `hydraulischem Gefuehl` basierenden Deutungen bisher keiner wissenschaftlichen Ueberpruefung unterzogen wurden. Das ist um so bemerkenswerter, als auf der Grundlage solcher unsicheren Vermutungen seitens der Turbinenhersteller nun Anforderungen an die Stroemungsqualitaet im Einlaufbereich erhoben werden. Es erfordert aber mitunter grossen baulichen Aufwand, diese Forderungen zu

  5. Development of the NRC`s Human Performance Investigation Process (HPIP). Volume 3, Development documentation

    Energy Technology Data Exchange (ETDEWEB)

    Paradies, M.; Unger, L. [System Improvements, Inc., Knoxville, TN (United States); Haas, P.; Terranova, M. [Concord Associates, Inc., Knoxville, TN (United States)

    1993-10-01

    The three volumes of this report detail a standard investigation process for use by US Nuclear Regulatory Commission (NRC) personnel when investigating human performance related events at nuclear power plants. The process, called the Human Performance Investigation Process (HPIP), was developed to meet the special needs of NRC personnel, especially NRC resident and regional inspectors. HPIP is a systematic investigation process combining current procedures and field practices, expert experience, NRC human performance research, and applicable investigation techniques. The process is easy to learn and helps NRC personnel perform better field investigations of the root causes of human performance problems. The human performance data gathered through such investigations provides a better understanding of the human performance issues that cause events at nuclear power plants. This document, Volume III, is a detailed documentation of the development effort and the pilot training program.

  6. caracterisation des systemes de production a base d'anacardier

    African Journals Online (AJOL)

    AISA

    Mots clés : Systèmes de culture, anacardier, gestion des plantations, rentabilité économique, Bénin. .... qui élimine au fur et à mesure les variables .... regard à la performance des arbres. ..... le contrôle des mauvaises herbes et la meilleure.

  7. Impact de la qualité de l'audit externe sur la liquidité des titres des entreprises tunisiennes cotées : Investigation théorique et évidence empirique

    OpenAIRE

    Hakim Ghorbel , Faten

    2008-01-01

    International audience; Cette recherche a pour objectif d'étudier l'impact de la qualité d'audit externe sur la liquidité. Nous appréhendons la qualité d'audit dans le cadre de notre étude par "la qualité de l'auditeur", et notamment de son indépendance et de ses compétences. Après avoir contrôlé l'effet d'autres variables censées, d'après la théorie, influencer la liquidité, les tests effectués ont permis de dégager une relation positive entre l'appartenance des auditeurs à un réseau interna...

  8. Environmental biodegradability of diesel oil: composition and performances of degradative micro-floras; Biodegradabilite du gazole dans l'environnement: composition et performances des microflores degradatrices

    Energy Technology Data Exchange (ETDEWEB)

    Penet, S.

    2004-09-01

    The large use of petroleum products makes them a significant source of pollutants in ground water and soils. Biodegradation studies are therefore relevant either to evaluate possibilities of natural attenuation or define bio-remediation strategies. In this study, the possible relationship between the environmental microflora structures and their capabilities for diesel oil biodegradation was investigated. The degradation capacities, i.e. kinetics and extent of biodegradation, were evaluated in closed batch systems by hydrocarbon consumption and CO{sub 2} production, both determined by gas chromatography. The intrinsic biodegradability of different types of diesel oils and the degradation capacities of microflora from ten polluted and ten unpolluted soils samples were determined. The data showed that: i) diesel oil was biodegradable, ii) n-alkanes were totally degraded by each microflora, the final amount of residual hydrocarbons being variable, iii) polluted-soil samples exhibited a slightly higher degradation rate (80%) that polluted-soil samples (67%) or activated sludge (64%). In order to define the contribution of various bacterial groups to diesel oil degradation, enrichment cultures were performed on hydrocarbons representative from the structural classes of diesel oil: hexadecane for n-alkanes, pristane for iso-alkanes, decalin for cyclo-alkanes, phenanthrene for aromatics. By using a 16S rDNA-sequencing method, the bacterial structures of the adapted microflora were determined and compared to that of the native microflora. A marked effect of the selection pressure was observed on the diversity of the microflora, each microflora harboring a major and specific bacterial group. The degradation capacities of the adapted microflora and the occurrence of genes coding for initial hydrocarbon oxidation (alkB, nahAc, cypP450) were also studied. No clear relationship between microflora genes and degradation performances was noted. This seemed to indicate that

  9. Environmental biodegradability of diesel oil: composition and performances of degradative micro-floras; Biodegradabilite du gazole dans l'environnement: composition et performances des microflores degradatrices

    Energy Technology Data Exchange (ETDEWEB)

    Penet, S

    2004-09-01

    The large use of petroleum products makes them a significant source of pollutants in ground water and soils. Biodegradation studies are therefore relevant either to evaluate possibilities of natural attenuation or define bio-remediation strategies. In this study, the possible relationship between the environmental microflora structures and their capabilities for diesel oil biodegradation was investigated. The degradation capacities, i.e. kinetics and extent of biodegradation, were evaluated in closed batch systems by hydrocarbon consumption and CO{sub 2} production, both determined by gas chromatography. The intrinsic biodegradability of different types of diesel oils and the degradation capacities of microflora from ten polluted and ten unpolluted soils samples were determined. The data showed that: i) diesel oil was biodegradable, ii) n-alkanes were totally degraded by each microflora, the final amount of residual hydrocarbons being variable, iii) polluted-soil samples exhibited a slightly higher degradation rate (80%) that polluted-soil samples (67%) or activated sludge (64%). In order to define the contribution of various bacterial groups to diesel oil degradation, enrichment cultures were performed on hydrocarbons representative from the structural classes of diesel oil: hexadecane for n-alkanes, pristane for iso-alkanes, decalin for cyclo-alkanes, phenanthrene for aromatics. By using a 16S rDNA-sequencing method, the bacterial structures of the adapted microflora were determined and compared to that of the native microflora. A marked effect of the selection pressure was observed on the diversity of the microflora, each microflora harboring a major and specific bacterial group. The degradation capacities of the adapted microflora and the occurrence of genes coding for initial hydrocarbon oxidation (alkB, nahAc, cypP450) were also studied. No clear relationship between microflora genes and degradation performances was noted. This seemed to indicate that

  10. Modelisation des effets physico-techniques pour la conception des ...

    African Journals Online (AJOL)

    automatisation dans les installations industrielles a besoin d'une régulation automatique des commandes des processus technologiques pour lesquelles certaines contraintes sont à relever compte tenu des exigences des innovations scientifiques de ...

  11. Investigating the Link between Environmental Performance and Corporate Performance in the UK

    OpenAIRE

    Boonchan, Poomkaew

    2010-01-01

    This study is part of the ongoing ‘ERIPS’ project at the University of Nottingham which focus on examining the impact of environmental performance on environmental performance of firms in the UK manufacturing sector. Both primary data which has been obtained by using a questionnaire survey (firm level data) and secondary data obtained from FAME database have been used in this study. Further, structural equation modeling and regression analyses (i.e., mediated and moderated regression analysis...

  12. Improved Mask Protected DES using RSA Algorithm

    Directory of Open Access Journals (Sweden)

    Asha Latha S.

    2016-01-01

    Full Text Available The data encryption standard is a pioneering and farsighted standard which helped to set a new paradigm for encryption standards. But now DES is considered to be insecure for some application. Asymmetric mask protected DES is an advanced encryption method for effectively protecting the advanced DES. There are still probabilities to improve its security. This paper propose a method, which introduce a RSA key generation scheme in mask protected DES instead of plain key, which result in enhancement in the security of present asymmetric mask protected DES. We further propose a Vedic mathematical method of RSA implementation which reduce the complexity of computation in RSA block thereby resulting in reduced delay (four timesthat improves the performance of overall system. The software implementation was performed using Xilinx 13.2 and Model-Sim was used for the simulation environment.

  13. IRE (Institut National des Radioelements) site in Belgium. Report of in situ measurements and analyses performed for the RTBF

    International Nuclear Information System (INIS)

    2010-05-01

    This document reports various analyses performed within the frame of the preparation and filming of a TV documentary on the Belgium National Institute of Radio-elements. It reports gamma radiation measurements performed at the vicinity of the institute, discusses the possible origin of its increase at the vicinity of the institute, analyses of sludge samples coming from a wastewater treatment works, and analyses of milk, cabbage, mosses and sediments collected by residents

  14. Using XML to encode TMA DES metadata

    Directory of Open Access Journals (Sweden)

    Oliver Lyttleton

    2011-01-01

    Full Text Available Background: The Tissue Microarray Data Exchange Specification (TMA DES is an XML specification for encoding TMA experiment data. While TMA DES data is encoded in XML, the files that describe its syntax, structure, and semantics are not. The DTD format is used to describe the syntax and structure of TMA DES, and the ISO 11179 format is used to define the semantics of TMA DES. However, XML Schema can be used in place of DTDs, and another XML encoded format, RDF, can be used in place of ISO 11179. Encoding all TMA DES data and metadata in XML would simplify the development and usage of programs which validate and parse TMA DES data. XML Schema has advantages over DTDs such as support for data types, and a more powerful means of specifying constraints on data values. An advantage of RDF encoded in XML over ISO 11179 is that XML defines rules for encoding data, whereas ISO 11179 does not. Materials and Methods: We created an XML Schema version of the TMA DES DTD. We wrote a program that converted ISO 11179 definitions to RDF encoded in XML, and used it to convert the TMA DES ISO 11179 definitions to RDF. Results: We validated a sample TMA DES XML file that was supplied with the publication that originally specified TMA DES using our XML Schema. We successfully validated the RDF produced by our ISO 11179 converter with the W3C RDF validation service. Conclusions: All TMA DES data could be encoded using XML, which simplifies its processing. XML Schema allows datatypes and valid value ranges to be specified for CDEs, which enables a wider range of error checking to be performed using XML Schemas than could be performed using DTDs.

  15. Using XML to encode TMA DES metadata.

    Science.gov (United States)

    Lyttleton, Oliver; Wright, Alexander; Treanor, Darren; Lewis, Paul

    2011-01-01

    The Tissue Microarray Data Exchange Specification (TMA DES) is an XML specification for encoding TMA experiment data. While TMA DES data is encoded in XML, the files that describe its syntax, structure, and semantics are not. The DTD format is used to describe the syntax and structure of TMA DES, and the ISO 11179 format is used to define the semantics of TMA DES. However, XML Schema can be used in place of DTDs, and another XML encoded format, RDF, can be used in place of ISO 11179. Encoding all TMA DES data and metadata in XML would simplify the development and usage of programs which validate and parse TMA DES data. XML Schema has advantages over DTDs such as support for data types, and a more powerful means of specifying constraints on data values. An advantage of RDF encoded in XML over ISO 11179 is that XML defines rules for encoding data, whereas ISO 11179 does not. We created an XML Schema version of the TMA DES DTD. We wrote a program that converted ISO 11179 definitions to RDF encoded in XML, and used it to convert the TMA DES ISO 11179 definitions to RDF. We validated a sample TMA DES XML file that was supplied with the publication that originally specified TMA DES using our XML Schema. We successfully validated the RDF produced by our ISO 11179 converter with the W3C RDF validation service. All TMA DES data could be encoded using XML, which simplifies its processing. XML Schema allows datatypes and valid value ranges to be specified for CDEs, which enables a wider range of error checking to be performed using XML Schemas than could be performed using DTDs.

  16. Using XML to encode TMA DES metadata

    Science.gov (United States)

    Lyttleton, Oliver; Wright, Alexander; Treanor, Darren; Lewis, Paul

    2011-01-01

    Background: The Tissue Microarray Data Exchange Specification (TMA DES) is an XML specification for encoding TMA experiment data. While TMA DES data is encoded in XML, the files that describe its syntax, structure, and semantics are not. The DTD format is used to describe the syntax and structure of TMA DES, and the ISO 11179 format is used to define the semantics of TMA DES. However, XML Schema can be used in place of DTDs, and another XML encoded format, RDF, can be used in place of ISO 11179. Encoding all TMA DES data and metadata in XML would simplify the development and usage of programs which validate and parse TMA DES data. XML Schema has advantages over DTDs such as support for data types, and a more powerful means of specifying constraints on data values. An advantage of RDF encoded in XML over ISO 11179 is that XML defines rules for encoding data, whereas ISO 11179 does not. Materials and Methods: We created an XML Schema version of the TMA DES DTD. We wrote a program that converted ISO 11179 definitions to RDF encoded in XML, and used it to convert the TMA DES ISO 11179 definitions to RDF. Results: We validated a sample TMA DES XML file that was supplied with the publication that originally specified TMA DES using our XML Schema. We successfully validated the RDF produced by our ISO 11179 converter with the W3C RDF validation service. Conclusions: All TMA DES data could be encoded using XML, which simplifies its processing. XML Schema allows datatypes and valid value ranges to be specified for CDEs, which enables a wider range of error checking to be performed using XML Schemas than could be performed using DTDs. PMID:21969921

  17. Membrane fluidization by alcohols inhibits DesK-DesR signalling in Bacillus subtilis.

    Science.gov (United States)

    Vaňousová, Kateřina; Beranová, Jana; Fišer, Radovan; Jemioła-Rzemińska, Malgorzata; Matyska Lišková, Petra; Cybulski, Larisa; Strzałka, Kazimierz; Konopásek, Ivo

    2018-03-01

    After cold shock, the Bacillus subtilis desaturase Des introduces double bonds into the fatty acids of existing membrane phospholipids. The synthesis of Des is regulated exclusively by the two-component system DesK/DesR; DesK serves as a sensor of the state of the membrane and triggers Des synthesis after a decrease in membrane fluidity. The aim of our work is to investigate the biophysical changes in the membrane that are able to affect the DesK signalling state. Using linear alcohols (ethanol, propanol, butanol, hexanol, octanol) and benzyl alcohol, we were able to suppress Des synthesis after a temperature downshift. The changes in the biophysical properties of the membrane caused by alcohol addition were followed using membrane fluorescent probes and differential scanning calorimetry. We found that the membrane fluidization induced by alcohols was reflected in an increased hydration at the lipid-water interface. This is associated with a decrease in DesK activity. The addition of alcohol mimics a temperature increase, which can be measured isothermically by fluorescence anisotropy. The effect of alcohols on the membrane periphery is in line with the concept of the mechanism by which two hydrophilic motifs located at opposite ends of the transmembrane region of DesK, which work as a molecular caliper, sense temperature-dependent variations in membrane properties. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Study of the performances of acoustic emission testing for glass fibre reinforced plastic pipes containing defects; Etude des performances du controle par emission acoustique de tubes en materiaux composites resine-fibre de verre contenant des defauts

    Energy Technology Data Exchange (ETDEWEB)

    Villard, D.; Vidal, M.C.

    1995-08-01

    Glass fibre reinforced plastic pipes are more and more often used, in nuclear power plants, for building or replacement of water pipings classified `nuclear safety`. Tests have been performed to evaluate the performances of acoustic emission testing for in service inspection of these components. The tests were focused on glass fibre reinforced polyester and vinyl-ester pipes, in as received conditions or containing impacts, and intentionally introduced defects. They have been carried out by CETIM, following the ASTM Standard E 1118 (code CARP), to a maximum pressure lever of 25 Bar The results show that the CARP procedure can be used for detection of defects and evaluation of their noxiousness towards internal pressure: most of the tubes containing low energy impacts could not be distinguished from tubes without defect; on the other hand the important noxiousness of lacks of impregnation of roving layer appeared clearly. Complementary tests have been performed on some tubes at a more important pressure lever, for which the damage of the tubes in enough to deteriorate there elastic properties. The results showed that CARP procedure give valuable informations on damage level. It would be interesting to evaluate acoustic emission on tubes containing realistic in-service degradations. (author). 11 refs., 15 figs., 6 tabs., 2 appends.

  19. Investigations on the chemical composition of the organic fraction of tropospheric aerosols. Final report; Untersuchungen zur chemischen Zusammensetzung der organischen Komponente des troposphaerischen Aerosols. AFS-Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, T.; Warscheid, B.

    2000-07-01

    Although the knowledge about the significance of airborne particulate matter for the radiation balance of the atmosphere has increased during the last few years, several important aerosol formation mechanisms are still poorly understood. This is especially true for aerosols which are formed from volatile organic precursors from natural or anthropogenic sources (secondary organic aerosols). Therefore, the research project aimed on the development of a mass spectrometric real-time technique for the qualitative and quantitative investigations of the chemical composition of secondary organic aerosols, especially from the ozonolysis of monoterpenes (e.g. {alpha}-pinene, {beta}-pinene, sabinene, {delta}{sup 3}-carene, limonene). Using a modified atmospheric pressure chemical ionisation source (APCI), the formation of gas and particle phase products could be observed with a time resolution of about 1 second. The detection limit of the developed technique is about 100 ppt(v/v) in the positive ion mode. Based on the development of standard addition techniques, selected products were quantified in the gas and particle phase. Using isotopically labelled water also certain underlying reaction mechanisms were investigated. Another part of the project focused on the identification of low volatile reaction products by MS/MS-studies. These studies showed that the particle phase is mainly composed of several multifunctional carboxylic acids (dicarboxylic acids, oxo-carboxylic acids, hydroxy-carboxylic acids etc.). Finally, the APCI-studies gave robust evidences on the presence of strong intermolecular interactions between the different products. Since the experiments also showed a correlation between the intensity of product interactions (adduct formation) by hydrogen-bonding and new particle formation potential, the results of the project can be considered to provide an important contribution for an better understanding of nucleation events above forested areas. (orig.) [German

  20. Characterisation and exploitation of Atlas electromagnetic calorimeter performances: muons study and timing resolution use; Caracterisation et exploitation des performances du calorimetre electromagneique d'Atlas: etude des muons et mise a profit de la resolution en temps

    Energy Technology Data Exchange (ETDEWEB)

    Camard, A

    2004-10-01

    The ATLAS detector in LHC involves electromagnetic calorimeters. The purpose of this work is to study the calorimeter response to the muons contaminating the beam used to test the different modules of ATLAS. We have showed how data analysis from the testing beam can be used to assure that the required performance for the study of the detector response to muons provides a complementary diagnostic tool for electrons. We have taken part into the design of a testing bench aimed at assessing the performance of the receiver circuit for timing and triggering signals. We have developed, in the framework of a quick simulation of ATLAS, a tool for the reconstruction in a simple and fast manner of the localization of the main event vertex by using the measurement of the arrival time of particles with ATLAS's calorimeters. It is likely that this tool will be fully used during the starting phase of the ATLAS experiment because it is easier to operate it quickly and is less sensitive to the background noise than traditional tools based on charged-particle tracks recognition inside the detector.

  1. variabilite des productions et des revenus des exploitations

    African Journals Online (AJOL)

    3Centre de coopération internationale en recherche agronomique pour le développement (CIRAD), UMR Innovation,. Montpellier, France. Doubangolo COULIBALY, Email kone_b@yahoo.fr. RESUME. La durabilité des systèmes de production à base de coton dans un contexte de variabilité des prix aux producteurs et de ...

  2. Pour une approche écosystémique de la stratégie et la performance des incubateurs

    OpenAIRE

    Theodoraki , Christina

    2017-01-01

    This thesis is at the intersection of entrepreneurship and strategic management. It contributes to the emergence of a new theoretical steam inspired by the ecosystem approach and which aims to better understand the role of the context on the entrepreneurial dynamics. Its objective is more precisely a better understanding of incubator strategies in the entrepreneurial ecosystem. This research also addresses the relationship between these strategies and the incubators performance. The thesis by...

  3. Performances zootechniques et rentabilité financière des ovins en embouche au Burkina Faso

    Directory of Open Access Journals (Sweden)

    Somda J.

    2001-01-01

    Full Text Available Sheep fattening in Burkina Faso: biological performances and profitability. The purpose of this study was to identify the factors affecting the economical and biological performances of lamb fattening operations in rural area. This study was conducted in Oubritenga province in Burkina Faso. Eighty-three rams supplied by 24 producers were involved in the test. Two rations were dispensed during fifty days. Body weight changes and financial operations were monitored. A weight gain model was built to explore growth determinants. Then, cost-benefit ratios were analysed to identify financial efficiency factors. Results show that growth performance depends on the combination of diet and sheep breeds rather than on feed only. Output markets and input marketing policy influence negatively financial cost-effectiveness. This implies firstly, that feed mixes proposed to producers must take species characteristics into account. Secondly, marketing policies enforced on livestock inputs which focus on reducing taxes are indispensable to improve the cost-effetiveness of fattening operations.

  4. Investigating Musical Performance: Commonality and Diversity among Classical and Non-Classical Musicians

    Science.gov (United States)

    Creech, Andrea; Papageorgi, Ioulia; Duffy, Celia; Morton, Frances; Hadden, Elizabeth; Potter, John; De Bezenac, Christophe; Whyton, Tony; Himonides, Evangelos; Welch, Graham

    2008-01-01

    The research project "Investigating Musical Performance: Comparative Studies in Advanced Musical Learning" was devised to investigate how classical, popular, jazz and Scottish traditional musicians deepen and develop their learning about performance in undergraduate, postgraduate and wider music community contexts. The aim of this paper is to…

  5. Students' Performance in Investigative Activity and Their Understanding of Activity Aims

    Science.gov (United States)

    Gomes, Alessandro Damasio Trani; Borges, A. Tarciso; Justi, Rosaria

    2008-01-01

    This study investigates the relationship between the students' understanding of the aims of an investigative activity and their performance when conducting it. One hundred and eighty-one year nine students from a public middle school in Brazil took part in the study. Students working in pairs were asked to investigate two problems using a…

  6. Investigation of the spatial structure of des-Gly9-[Arg8]vasopressin by the methods of two-dimensional NMR spectroscopy and theoretical conformational analysis

    International Nuclear Information System (INIS)

    Shenderovich, M.D.; Sekatsis, I.P.; Liepin'sh, E.E.; Nikiforovich, G.V.; Papsuevich, O.S.

    1986-01-01

    An assignment of the 1 H NMR signals of des-Gly 9 -[Arg 8 ]vasopressin in dimethyl sulfoxide has been made by 2D spectroscopy. The SSCCs and temperature coefficients Δδ/Δ T have been obtained for the amide protons and the system of NOE cross-peaks in the two-dimensional NOESY spectrum has been analyzed. The most important information on the spatial structure of des-Gly 9 -[Arg 8 ]vasopressin is given by the low value of the temperature coefficient Δδ/Δ T of the Asn 5 amide proton and the NOE between the α-protons of Cys 1 and Cys 6 . It is assumed that the screening of the NH proton of the Asn 5 residue from the solvent is connected with a β-bend of the backbone in the 2-5 sequence, and the distance between the C/sup α/H atoms of the Cys 1 and Cys 6 residues does not exceed 4 A. Bearing these limitations in mind, a theoretical conformational analysis of the molecule has been made. The group of low-energy conformations of the backbone obtained has been compared with the complete set of NMR characteristics

  7. Civili, langue des Baloango

    DEFF Research Database (Denmark)

    Mavoungou, Paul Achille; Ndinga-Koumba-Binza, Hugues Steve

    , Congo, Angola, etc.) issus de la décolonisation. Il présente de façon succincte quelques phénomènes historiques, phonologiques, morphosyntaxiques, homonymiques et analogiques de la langue. Des faits sémantiques des emprunts linguistiques y sont également décrits dans le cadre des changements...

  8. Des racines et des ailes

    Directory of Open Access Journals (Sweden)

    Stéphanie Vincent-Geslin

    2012-05-01

    Full Text Available Les mobilités pendulaires semblent être en augmentation en Europe depuis une dizaine d’années. Cette croissance du temps passé à se déplacer amène à remettre en question la conjecture de Zahavi et apparaît relativement inexplicable en regard du paradigme classique de l’acteur rationnel traditionnellement utilisé dans le champ des transports. Si, dans la littérature, les temps de déplacements sont principalement expliqués par le contexte résidentiel, la forme urbaine et le travail, ce cadre explicatif ne dit rien des processus de décision eux-mêmes qui amènent aux pendularités intensives.À partir d’une enquête qualitative menée auprès de pendulaires français, suisses et belges, cette contribution propose d’analyser les arbitrages et les éléments déterminants des processus de la grande pendularité. Les mobilités quotidiennes pendulaires apparaissent comme le résultat de compromis entre activité professionnelle, attachement résidentiel et choix de vie et prennent ainsi la forme de stratégies de conciliation entre vie privée et vie professionnelle. Ces mobilités spatiales permettent alors paradoxalement la préservation des ancrages résidentiels, sociaux et familiaux.Roots and wings. Long-distance commuting patterns, or how to conciliate professional and personal lifeLong-distance commuting patterns appear to be increasing in Europe over the last ten years. These raising mobility patterns lead to reappraise the Zahavi conjecture and appear largely inexplicable by the classical rational actor paradigm traditionally used in transportation research. In literature, commuting is mainly explained by residential contexts, urban forms and job. Nevertheless this theoretical frame says little about the decision-making processes themselves. Based on a qualitative survey conducted in three European countries - France, Belgium and Switzerland – among a population of high commuters, this paper proposes an analysis of

  9. Investigation of a Novel Turbulence Model and Using Leading-Edge Slots for Improving the Aerodynamic Performance of Airfoils and Wind Turbines

    Science.gov (United States)

    Beyhaghi, Saman

    Because of the problems associated with increase of greenhouse gases, as well as the limited supplies of fossil fuels, the transition to alternate, clean, renewable sources of energy is inevitable. Renewable sources of energy can be used to decrease our need for fossil fuels, thus reducing impact to humans, other species and their habitats. The wind is one of the cleanest forms of energy, and it can be an excellent candidate for producing electrical energy in a more sustainable manner. Vertical- and Horizontal-Axis Wind Turbines (VAWT and HAWT) are two common devices used for harvesting electrical energy from the wind. Due to the development of a thin boundary layer over the ground surface, the modern commercial wind turbines have to be relatively large to be cost-effective. Because of the high manufacturing and transportation costs of the wind turbine components, it is necessary to evaluate the design and predict the performance of the turbine prior to shipping it to the site, where it is to be installed. Computational Fluid Dynamics (CFD) has proven to be a simple, cheap and yet relatively accurate tool for prediction of wind turbine performance, where the suitability of different designs can be evaluated at a low cost. High accuracy simulation methods such as Large Eddy Simulation (LES) and Detached Eddy Simulation (DES) are developed and utilized in the past decades. Despite their superior importance in large fluid domains, they fail to make very accurate predictions near the solid surfaces. Therefore, in the present effort, the possibility of improving near-wall predictions of CFD simulations in the near-wall region by using a modified turbulence model is also thoroughly investigated. Algebraic Stress Model (ASM) is employed in conjunction with Detached Eddy Simulation (DES) to improve Reynolds stresses components, and consequently predictions of the near-wall velocities and surface pressure distributions. The proposed model shows a slightly better performance

  10. Synthesis of tritium measurement results performed by IRSN and CEA from November 5, 2010, to February 1, 2012, in the environment of the 2M Process company building at Saint-Maur-des-Fosses; Synthese des resultats des mesures de tritium effectuees par l'IRSN et le CEA du 5 novembre 2010 au 1er fevrier 2012 dans l'environnement de l'entreprise 2M Process a Saint-Maur-des-Fosses

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-02-22

    A building of 2M Process company at Saint-Maur-des-Fosses (France) has been accidentally contaminated after the handling of a tritium contaminated device. The consequence has been a tritium release inside and in the close environment of the building. Since November 5, on request of the French nuclear safety authority (ASN), the French institute of radiation protection and nuclear safety (IRSN) has performed tritium measurements in water, air and plants sampled in the vicinity of the building in order to delimit the contaminated area and to follow its decay during and after the cleansing of the building. From March 16, 2011 onward, the IRSN's monitoring has been lightened as an answer to the complementary monitoring implemented by the CEA in the framework of the environment monitoring plan ordered by the Prefecture. The results published in previous reports have shown a strong contamination of the building and the presence of significant amounts of tritium in plant leaves and superficial waters in a 50 m radius around the 2M Process building. This note makes a synthesis of the tritium concentrations measured in plant leaves, surface waters, air, and rainwater sampled near the 2M Process building since November 5, 2010, and up to February 1, 2012. (J.S.)

  11. Modelisation, conception et simulation des performances d'un collecteur solaire aeraulique a tubes sous vide en milieu nordique

    Science.gov (United States)

    Paradis, Pierre-Luc

    The global energy consumption is still increasing year after year even if different initiatives are set up to decrease fossil fuel dependency. In Canada 80% of the energy is used for space heating and domestic hot water heating in residential sector. This heat could be provided by solar thermal technologies despite few difficulties originating from the cold climate. The aim of this project is to design a solar evacuated tube thermal collector using air as the working fluid. Firstly, needs and specifications of the product are established in a clear way. Then, three concepts of collector are presented. The first one relies on the standard evacuated tube. The second one uses a new technology of tubes; both sides are open. The third one uses heat pipe to extract the heat from the tubes. Based on the needs and specification as criteria, the concept involving tubes with both sides open has been selected as the best idea. In order to simulate the performances of the collector, a model of the heat exchanges in an evacuated tube was developed in 4 steps. The first step is a model in steady state intended to calculate the stagnation temperature of the tube for a fixed solar radiation, outside temperature and wind speed. As a second step, the model is generalised to transient condition in order to validate it with an experimental setup. A root mean square error of 2% is then calculated. The two remainder steps are intended to calculate the temperature of airflow leaving the tube. In the same way, a first model in steady state is developed and then generalised to the transient mode. Then, the validation with an experimental setup gave a difference of 0.2% for the root mean square error. Finally, a preindustrial prototype intended to work in open loop for preheating of fresh air is presented. During the project, explosion of the both sides open evacuated tube in overheating condition blocked the construction of a real prototype for the test. Different path for further work are

  12. Experience from performance testing of low NOx burners for refinery heaters; Tests de performance avec des bruleurs de raffinerie a basse emission de NOx

    Energy Technology Data Exchange (ETDEWEB)

    Boden, J.C. [Refining Technology, BP Oil International, Sunbury (United Kingdom)

    2001-07-01

    Developments in low NOx burner technology have resulted in major reductions in NOx emissions from refinery process heaters. However, the techniques used in low NOx burners to reduce NOx emissions can potentially affect other key aspects of burner performance, particularly flame stability and completeness of combustion. BP has evaluated many of the currently available low and ultra-low NOx burners, both natural and forced draught, in its purpose-built test furnace. This extensive test programme has shown that to be a reliable predictor of actual performance a test rig must recreate accurately the real furnace conditions, particularly with respect to furnace and hearth temperatures. The testing has demonstrated the NOx emissions to be expected in practice from different generic types of burner, conventional, low NOx and ultra-low NOx, and has highlighted the sets of conditions most likely to lead to combustion performance problems. (authors)

  13. Ameliorer les performances environnementales des centrales a charbon pulverise via la co-combustion de combustible derive de dechets

    Science.gov (United States)

    Vekemans, Odile Geraldine

    interactions between ReEF(TM) components take place during its devolatilization. During the second step of this study, performances of the co-firing of coal and sorbent are compared to that of co-combustion of coal and ReEF(TM) without sorbent. This is carried out in a reactor specially build for this study, capable of reproducing the contact mode between gas and particles, the concentrations, the temperature gradient and the pressure typical of pulverized coal boiler. SO2 emissions reduction around 20% are observed in presence of CaCO3 and of Ca(OH)2 compared to the coal baseline, reduction that generally increased with the increase of sorbent molar ratio compared to sulfur (also called stoic). As for the co-combustion of 20%th of ReEF(TM) and coal, a SO2 emission reduction around 20% is also measured, with no clear effect of ReEF(TM) composition (fiber to plastic ratio). On the other hand, the HCl level that is negligible during coal combustion with and without sorbent, reaches around 20ppm in presence of ReEF(TM), and increases proportionally with the ReEF(TM) plastic content. The first step of this work consists in the study of the co-combustion of coal and ReEF(TM) containing limestone (CaCO3), a mix of sodium bicarbonate (NaHCO3) and limestone, as well as a mix of trona (Na2CO3.NaHCO3.H2O) and limestone. The amount of sorbent in the ReEF(TM) as well as the feeding parameters are adjusted to reach a 20%th feeding of ReEF(TM) compared to coal, to inject sorbents at a stoic of 1, 2 and 2.5 and to obtain Na/Ca molar ratios of 0, 0.1 with trona and NaHCO3, and 0.5 with NaHCO 3 only. Globally, as in the case of sorbent alone, the increase of the total stoic of the feed leads to increased SO2 capture. For a given stoic, to combine waste and limestone in the ReEF(TM), compared to using limestone alone, allows to reach higher levels of SO2 emissions reduction. The combination of sodium-based and calcium-based sorbent even leads to record SO2 emissions reduction of more than 50

  14. Investigation of transient models and performances for a doubly fed wind turbine under a grid fault

    DEFF Research Database (Denmark)

    Wang, M.; Zhao, B.; Li, H.

    2011-01-01

    fed induction generator (DFIG), the assessments of the impact on the electrical transient performances were investigated for the doubly fed wind turbine with different representations of wind turbine drive-train dynamics models, different initial operational conditions and different active crowbar...... crowbar on the transient performances of the doubly fed wind turbine were also investigated, with the possible reasonable trip time of crowbar. The investigation have shown that the transient performances are closely correlated with the wind turbine drive train models, initial operational conditions, key...

  15. An experimental investigation on relationship between PSFs and operator performances in the digital main control room

    International Nuclear Information System (INIS)

    Park, Jooyoung; Lee, Daeil; Jung, Wondea; Kim, Jonghyun

    2017-01-01

    Highlights: • The relationship between performance shaping factors and operator performances are experimentally investigated. • The experiment includes features of digital main control room. • The result indicates that the operator’s experience level is the most effective on the performance. - Abstract: This study designs an experiment to investigate the relationship between performance shaping factors (PSFs) and operator performances. This study involves selecting three PSFs that are controllable in the experiments: (1) experience, (2) complexity, and (3) urgency. Six scenarios are developed to reflect the PSFs. The experiment involves the participation of licensed operators and the use of an APR1400 simulator. During the experiment, operator performances, such as completion time, error, secondary task, workload, and situation awareness, are measured and collected. The experimental result indicates that the operator’s experience is most effective on the overall performances. The task complexity influences the secondary tasks and situation awareness.

  16. Radioisotopes in sedimentology; Emploi des radioelements en sedimentologie

    Energy Technology Data Exchange (ETDEWEB)

    Courtois, G [CEA, Centre d' etudes Nucleaires de Saclay (France)

    1967-05-15

    infirmation de theses de transport, recherches des phenomenes fondamentaux de transport associees a des experiences en canaux. Apres avoir evoque les possibilites des traceurs naturels, ou dus a des retombees radioactives ou a des rejets d'effluents radioactifs, l'auteur aborde les aspects techniques de l'utilisation des traceurs artificiels: le choix du radioisotope, le marquage superficiel et massique avec mention particuliere du probleme des vases, les appareils d'immersion et de detection, les problemes de navigation et de reperage topographique . Dans la partie concernant l'exploitation des resultats, le probleme de l'obtention de resultats quantitatifs est traite et les methodes proposees decrites; l'auteur fait egalement etat des tentatives actuelles tres louables en vue de relier les tres nombreuses theories de transport de sediments aux parametres mesures sur le terrain au moyen de traceurs radioactifs. Il developpe egalement quelques aspects lies aux problemes de securite. Les methodes decrites peuvent etre egalement appliquees a des problemes voisins et fort interessants: les problemes d'erosion des sols, de stabilisation des terrains, de deplacement des dunes. Quelques indications succinctes sont donnees sur ce sujet. En conclusion, l'auteur indique aussi clairement que possible le potentiel actuel de la methode, ses limitations et les travaux souhaitables pour I'ameliorer. -Mesures en continu de la turbidite. Le transport solide en suspension etant en general beaucoup plus important que le charriage de fond, il importe de pouvoir le mesurer de facon continue; l'auteur donne quelques exemples de l'utilite d'un tel renseignement. Une telle mesure peut etre faite par des jauges decrites dans les ouvrages publies et dont on donne les principes et performances en fonction de la bibliographie connue. L'auteur donne egalement les resultats susceptibles d'etre obtenus en mesurant la turbidite par la radioactivite naturelle d'un sediment en suspension et compare les deux

  17. The performances of natural gas infrared radiation in paints baking; Les performances de l`infrarouge gaz pour la cuisson des peintures

    Energy Technology Data Exchange (ETDEWEB)

    Lourdou, I. [Gaz de France, 75 - Paris (France). Centre d`essais de recherches sur les utilisations du gaz

    1998-04-01

    The direction of research of Gaz de France (GdF) company, in association with the centre for technical studies of aeraulic and thermal industries (CETIAT), has carried out infrared radiation baking tests on real painted parts using natural gas burners. Tests were performed on the Erica test facility. The development of the use of infrared gas burners in the mechanical industry requires an optimum use of this technology in the baking cycle. (J.S.)

  18. Le statut politique des petits territoires insulaires à vocation touristique a-t’il une influence sur leur performance économique et sociale ? Approche comparative Does political status of small island tourist economies have an influence on their economic and social performance ? Comparative approach

    Directory of Open Access Journals (Sweden)

    Louis Dupont

    2012-05-01

    Full Text Available Le paradigme du développement dans les Petites Economies Insulaires se définit par divers facteurs. Parmi ces derniers figurent entre-autres, le statut politique et le niveau de développement touristique atteint par ces territoires. Cette étude, en croisant diverses analyses a pour but d’évaluer et de comparer empiriquement à l’aide de vingt-cinq indicateurs socio-économiques et démographiques, l’influence de différentes variables et plus particulièrement de celle relative au statut politique sur la performance économique et sociale de deux groupes de territoires, l’un composé de seize petits espaces insulaires de la Caraïbe et du Pacifique, politiquement dépendants et l’autre, de dix-neuf îles des mêmes régions qui ont accédé à la souveraineté. D’une part, les résultats montrent que : comme variable explicative, le statut politique associé à d’autres facteurs intervient pour les deux-tiers dans la performance économique et sociale de ces îles. D’autre part, ils indiquent que les territoires insulaires politiquement dépendants sont économiquement plus prospères, socialement plus avancés, et démographiquement d’une plus grande maturité que ceux ayant acquis leur souveraineté. Toutefois, ces résultats ne doivent en aucun cas être interprétés comme des arguments contre la décolonisation, qui demeure une démarche moralement et universellement soutenable. Enfin, ils montrent également que les îles dépendantes qui bénéficient d’une large autonomie politique affichent en moyenne des résultats économiques et sociaux bien meilleurs que celles qui restent politiquement et centralement très liées à leur métropole, cas notamment de la Guadeloupe et de la Martinique pour lesquelles, en guise d’illustration nous proposons dans le cadre de leur probable évolution statutaire, un modèle de gouvernance qui, au plan politique soit le mieux adapté aux caractéristiques socio-économiques et

  19. Management des cœurs : La stratégie performative de management des cœurs.Magie tyrannique ou réalisme révolutionnaire ?

    OpenAIRE

    Citton , Yves

    2014-01-01

    International audience; Peut-il y avoir une « stratégie » de l'amour du prochain ? Tout semble devoir s'y opposer, à commencer par l'étymologie : le stratos (l'armée) a besoin d'un stratègos (un général) pour stratègein (commander ses troupes) vers l'écrasement d'un ennemi. Parler en termes de « stratégie », c'est donc – originellement – se plonger dans un monde d'épées sanglantes et de mâles en sueur, qui ne persisteront dans l'être qu'en hurlant leur haine destructrice et en accumulant des ...

  20. Performance investigation of a cogeneration plant with the efficient and compact heat recovery system

    KAUST Repository

    Myat, Aung; Thu, Kyaw; Kim, Young-Deuk; Choon, Ng Kim

    2011-01-01

    This paper presents the performance investigation of a cogeneration plant equipped with an efficient waste heat recovery system. The proposed cogeneration system produces four types of useful energy namely: (i) electricity, (ii) steam, (iii) cooling

  1. Laboratory investigation of the performance properties of hot mix asphalt containing waste glass

    CSIR Research Space (South Africa)

    Anochie-Boateng, Joseph

    2016-07-01

    Full Text Available CSIR is currently undertaking a study on potential utilization of crushed glass as a substitute material to natural aggregate in asphalt mixes. As part of the study, laboratory investigation is needed to determine the performance characteristics...

  2. Investigation of Effect of Different Run-Time Distributions on Smartnet Performance

    National Research Council Canada - National Science Library

    Armstrong, Robert

    1997-01-01

    This thesis investigates, using in-line simulation, the effect of non-deterministic runtime distributions on the performance of SmartNet's schedule execution using the Opportunistic Load Balancing (OLB...

  3. Investigating Conversational Dynamics: Interactive Alignment, Interpersonal Synergy, and Collective Task Performance

    Science.gov (United States)

    Fusaroli, Riccardo; Tylén, Kristian

    2016-01-01

    This study investigates interpersonal processes underlying dialog by comparing two approaches, "interactive alignment" and "interpersonal synergy", and assesses how they predict collective performance in a joint task. While the interactive alignment approach highlights imitative patterns between interlocutors, the synergy…

  4. An Investigation of Factors Affecting Multi-Task Performance in an Immersive Environment

    National Research Council Canada - National Science Library

    Branscome, Teresa A; Grynovicki, Jock O

    2007-01-01

    This report presents the results of a study included in a series of investigations designed to increase fundamental knowledge and understanding of the factors affecting multi-task performance in a military environment...

  5. In vitro performance investigation of bioresorbable scaffolds – Standard tests for vascular stents and beyond

    International Nuclear Information System (INIS)

    Schmidt, Wolfram; Behrens, Peter; Brandt-Wunderlich, Christoph; Siewert, Stefan; Grabow, Niels; Schmitz, Klaus-Peter

    2016-01-01

    Background/Purpose: Biodegradable polymers are the main materials for coronary scaffolds. Magnesium has been investigated as a potential alternative and was successfully tested in human clinical trials. However, it is still challenging to achieve mechanical parameters comparative to permanent bare metal (BMS) and drug-eluting stents (DES). As such, in vitro tests are required to assess mechanical parameters correlated to the safety and efficacy of the device. Methods/Materials: In vitro bench tests evaluate scaffold profiles, length, deliverability, expansion behavior including acute elastic and time-dependent recoil, bending stiffness and radial strength. The Absorb GT1 (Abbott Vascular, Temecula, CA), DESolve (Elixir Medical Corporation, Sunnyvale, CA) and the Magmaris (BIOTRONIK AG, Bülach, Switzerland) that was previously tested in the BIOSOLVE II study, were tested. Results: Crimped profiles were 1.38 ± 0.01 mm (Absorb GT1), 1.39 ± 0.01 mm (DESolve) and 1.44 ± 0.00 mm (Magmaris) enabling 6F compatibility. Trackability was measured depending on stiffness and force transmission (pushability). Acute elastic recoil was measured at free expansion and within a mock vessel, respectively, yielding results of 5.86 ± 0.76 and 5.22 ± 0.38% (Absorb), 7.85 ± 3.45 and 9.42 ± 0.21% (DESolve) and 5.57 ± 0.72 and 4.94 ± 0.31% (Magmaris). Time-dependent recoil (after 1 h) was observed for the Absorb and DESolve scaffolds but not for the Magmaris. The self-correcting wall apposition behavior of the DESolve did not prevent time-dependent recoil under vessel loading. Conclusions: The results of the suggested test methods allow assessment of technical feasibility based on objective mechanical data and highlight the main differences between polymeric and metallic bioresorbable scaffolds.

  6. In vitro performance investigation of bioresorbable scaffolds - Standard tests for vascular stents and beyond.

    Science.gov (United States)

    Schmidt, Wolfram; Behrens, Peter; Brandt-Wunderlich, Christoph; Siewert, Stefan; Grabow, Niels; Schmitz, Klaus-Peter

    2016-09-01

    Biodegradable polymers are the main materials for coronary scaffolds. Magnesium has been investigated as a potential alternative and was successfully tested in human clinical trials. However, it is still challenging to achieve mechanical parameters comparative to permanent bare metal (BMS) and drug-eluting stents (DES). As such, in vitro tests are required to assess mechanical parameters correlated to the safety and efficacy of the device. In vitro bench tests evaluate scaffold profiles, length, deliverability, expansion behavior including acute elastic and time-dependent recoil, bending stiffness and radial strength. The Absorb GT1 (Abbott Vascular, Temecula, CA), DESolve (Elixir Medical Corporation, Sunnyvale, CA) and the Magmaris (BIOTRONIK AG, Bülach, Switzerland) that was previously tested in the BIOSOLVE II study, were tested. Crimped profiles were 1.38±0.01mm (Absorb GT1), 1.39±0.01mm (DESolve) and 1.44±0.00mm (Magmaris) enabling 6F compatibility. Trackability was measured depending on stiffness and force transmission (pushability). Acute elastic recoil was measured at free expansion and within a mock vessel, respectively, yielding results of 5.86±0.76 and 5.22±0.38% (Absorb), 7.85±3.45 and 9.42±0.21% (DESolve) and 5.57±0.72 and 4.94±0.31% (Magmaris). Time-dependent recoil (after 1h) was observed for the Absorb and DESolve scaffolds but not for the Magmaris. The self-correcting wall apposition behavior of the DESolve did not prevent time-dependent recoil under vessel loading. The results of the suggested test methods allow assessment of technical feasibility based on objective mechanical data and highlight the main differences between polymeric and metallic bioresorbable scaffolds. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. In vitro performance investigation of bioresorbable scaffolds – Standard tests for vascular stents and beyond

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Wolfram, E-mail: wolfram.schmidt@uni-rostock.de [Institute for Biomedical Engineering, University Medicine Rostock, Friedrich-Barnewitz-Strasse 4, D-18119 Rostock-Warnemünde (Germany); Behrens, Peter, E-mail: peter.behrens@uni-rostock.de [Institute for Biomedical Engineering, University Medicine Rostock, Friedrich-Barnewitz-Strasse 4, D-18119 Rostock-Warnemünde (Germany); Brandt-Wunderlich, Christoph, E-mail: christoph.brandt@uni-rostock.de [Institute for ImplantTechnology and Biomaterials – IIB e.V., Associated Institute of the University of Rostock, Friedrich-Barnewitz-Strasse 4, D-18119 Rostock-Warnemünde (Germany); Siewert, Stefan, E-mail: stefan.siewert@uni-rostock.de [Institute for ImplantTechnology and Biomaterials – IIB e.V., Associated Institute of the University of Rostock, Friedrich-Barnewitz-Strasse 4, D-18119 Rostock-Warnemünde (Germany); Grabow, Niels, E-mail: niels.grabow@uni-rostock.de [Institute for Biomedical Engineering, University Medicine Rostock, Friedrich-Barnewitz-Strasse 4, D-18119 Rostock-Warnemünde (Germany); Schmitz, Klaus-Peter, E-mail: klaus-peter.schmitz@uni-rostock.de [Institute for ImplantTechnology and Biomaterials – IIB e.V., Associated Institute of the University of Rostock, Friedrich-Barnewitz-Strasse 4, D-18119 Rostock-Warnemünde (Germany)

    2016-09-15

    Background/Purpose: Biodegradable polymers are the main materials for coronary scaffolds. Magnesium has been investigated as a potential alternative and was successfully tested in human clinical trials. However, it is still challenging to achieve mechanical parameters comparative to permanent bare metal (BMS) and drug-eluting stents (DES). As such, in vitro tests are required to assess mechanical parameters correlated to the safety and efficacy of the device. Methods/Materials: In vitro bench tests evaluate scaffold profiles, length, deliverability, expansion behavior including acute elastic and time-dependent recoil, bending stiffness and radial strength. The Absorb GT1 (Abbott Vascular, Temecula, CA), DESolve (Elixir Medical Corporation, Sunnyvale, CA) and the Magmaris (BIOTRONIK AG, Bülach, Switzerland) that was previously tested in the BIOSOLVE II study, were tested. Results: Crimped profiles were 1.38 ± 0.01 mm (Absorb GT1), 1.39 ± 0.01 mm (DESolve) and 1.44 ± 0.00 mm (Magmaris) enabling 6F compatibility. Trackability was measured depending on stiffness and force transmission (pushability). Acute elastic recoil was measured at free expansion and within a mock vessel, respectively, yielding results of 5.86 ± 0.76 and 5.22 ± 0.38% (Absorb), 7.85 ± 3.45 and 9.42 ± 0.21% (DESolve) and 5.57 ± 0.72 and 4.94 ± 0.31% (Magmaris). Time-dependent recoil (after 1 h) was observed for the Absorb and DESolve scaffolds but not for the Magmaris. The self-correcting wall apposition behavior of the DESolve did not prevent time-dependent recoil under vessel loading. Conclusions: The results of the suggested test methods allow assessment of technical feasibility based on objective mechanical data and highlight the main differences between polymeric and metallic bioresorbable scaffolds.

  8. Performance of thyroid scintigraphy in the thyrotoxicosis etiological diagnosis: about 210 cases; Performance de la scintigraphie thyroidienne dans le diagnostic etiologique des thyrotoxicoses: a propos de 210 cas

    Energy Technology Data Exchange (ETDEWEB)

    Chatti, K.; Nouira, M.; Guezguez, M.; Sfar, R.; Essabbah, H. [CHU Sahloul, Service de medecine nucleaire, Sousse (Tunisia); Zantour, B. [CHU Mahdia, service d' endocrinologie (Tunisia)

    2010-07-01

    Purpose: The thyrotoxicosis is a syndrome linked to thyroid hormones excess grouping any causes leading to a overload in circulating hormones, including these ones linked to an inflammatory process (thyroiditis) or an exogenous contribution. The etiologic diagnosis is based on complementary examinations. The objective of our work is to elucidate the performance of scintigraphy in the etiologic diagnosis and the therapy approach of thyrotoxicosis through the experience of our service. Conclusions: Scintigraphy has a place in the etiologic diagnosis of thyrotoxicosis. it brings functional and morphological information and allows to guide the diagnostic and therapeutic approach. (N.C.)

  9. Impact of the lubricating oil on thermodynamic performances of reversible heat pumps; Impact de l'huile de lubrification sur les performances thermodynamiques des pompes a chaleur reversibles

    Energy Technology Data Exchange (ETDEWEB)

    Youbi-Idrissi, M

    2003-12-01

    This work deals with the effect of oil on the energy performances of refrigerating systems. To characterise this impact, two thermodynamic properties were studied: the solubility and the enthalpy. Thus, a simple measurement method was presented, allowing to study both transient and steady-state behaviour of various refrigerant/oil pairs. Thus, experimental data were validated and modelled. The suitable use of the solubility curves showed the zeotropic character of the refrigerant/oil mixture, which is directly reflected on the enthalpy calculation. For this property, a thermodynamic model was developed and experimentally validated. Its application led to a new presentation of the Mollier diagram taking into account the oil presence. It was then shown that, among all the circuit elements, the evaporator is the most penalized by the oil presence. Its performances decrease when the circulating mass fraction of oil increases, the superheat decreases and when the refrigerant-oil solubility increases. An experimental study on a reversible heat pump confirmed that if the circulation mass fraction of oil in the machine is lower than 2%, the impact of oil is reduced. Lastly, a local model of a refrigerating unit, initially charged with a zeotropic mixture, allowed to analyse the profiles of temperature, heat transfer coefficient and local composition of the refrigerant along a circuit. (author)

  10. Investigating the Impact of Job Satisfaction/Dissatisfaction on Iranian English Teachers' Job Performance

    Science.gov (United States)

    Afshar, Hassan Soodmand; Doosti, Mehdi

    2016-01-01

    As part of a large-scale project, this study investigated the differences between satisfied and dissatisfied Iranian junior secondary school English teachers in terms of their job performance. To this end, 64 Iranian English teachers and 1774 of their students completed a validated questionnaire specifically developed to investigate EFL teachers'…

  11. The Effects of Sex Steroids on Spatial Performance: A Review and an Experimental Clinical Investigation.

    Science.gov (United States)

    Liben, Lynn S.; Susman, Elizabeth J.; Finkelstein, Jordan W.; Chinchilli, Vernon M.; Kunselman, Susan; Schwab, Jacqueline; Dubas, Judith Semon; Demers, Laurence M.; Lookingbill, Georgia; D'Arcangelo, M. Rose; Krogh, Holleen R.; Kulin, Howard E.

    2002-01-01

    Investigated the relationship between sex hormones and spatial performance among adolescents treated with sex steroids for delayed puberty. Found that spatial performance varied according to gender but did not vary with levels of actively circulating sex steroids. Reviewed physiological mechanisms, developmental periods, and past empirical work…

  12. An Investigation of Selected Variables Related to Student Algebra I Performance in Mississippi

    Science.gov (United States)

    Scott, Undray

    2016-01-01

    This research study attempted to determine if specific variables were related to student performance on the Algebra I subject-area test. This study also sought to determine in which of grades 8, 9, or 10 students performed better on the Algebra I Subject Area Test. This study also investigated the different criteria that are used to schedule…

  13. Investigating General Chemistry Students' Metacognitive Monitoring of Their Exam Performance by Measuring Postdiction Accuracies over Time

    Science.gov (United States)

    Hawker, Morgan J.; Dysleski, Lisa; Rickey, Dawn

    2016-01-01

    Metacognitive monitoring of one's own understanding plays a key role in learning. An aspect of metacognitive monitoring can be measured by comparing a student's prediction or postdiction of performance (a judgment made before or after completing the relevant task) with the student's actual performance. In this study, we investigated students'…

  14. Investigation of the mechanical performance of Siemens linacs components during arc

    DEFF Research Database (Denmark)

    Rowshanfarzad, Pejman; Häring, Peter; Lynggaard Riis, Hans

    2015-01-01

    to linac rotation were separately investigated by acquisition of 37 EPID images of a simple phantom with five ball bearings at various gantry angles. A fast and robust software package was developed for automated analysis of image data. Three Siemens linacs were investigated. RESULTS: The average EPID sag...... for effective investigation of the behavior of Siemens linac components with gantry rotation. Such a comprehensive study has been performed for the first time on Siemens machines....

  15. Performance… et contre-performance communicationnelles : des stratégies argumentatives pour le débat politique télévisé Communicative performance in the media: A discourse analysis of argumentative strategies for political debate on TV

    Directory of Open Access Journals (Sweden)

    Guylaine Martel

    2008-09-01

    Full Text Available Selon la perspective interactionniste dans laquelle s’inscrit cette étude de la communication médiatique, la qualité de la performance communicationnelle repose en grande partie sur la capacité des locuteurs à simuler une interaction aussi naturelle que possible avec un public absent ou, dans les termes de Goffman (Forms of Talk, 1981, à le ratifier de manière à co-construire avec lui un message qui produit du sens. L’analyse des stratégies argumentatives produites par des politiciens au cours d’un débat télévisé révèle qu’en fonction de ce genre de production médiatique et des identités professionnelle et personnelle des politiciens, certains procédés rhétoriques sont particulièrement efficaces pour assurer la performance communicationnelle.This interactional approach to communication in media context suggests that the quality of the performance rests mostly on the speaker’s capacity to simulate, with an absent audience, an interaction as natural as possible or, in Goffman’s terms (Forms of Talk, 1981, to ratify the public in order to produce a message that makes sense. The analysis of some argumentative strategies used by politicians during a debate on TV reveals that, according to this type of media production and to the professional and personal identities of the politicians, some rhetorical procedures are particularly appropriate to support communicative performance.

  16. Burn up physics; Physique des combustibles irradies

    Energy Technology Data Exchange (ETDEWEB)

    Tretiakoff, O [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The present communication is devoted to a body of theoretical and experimental work carried out at the C.E.A. with the aim of adding to the current knowledge on the evolution of the reactivity (during fuel irradiation) in natural or slightly enriched Uranium reactors. The difficulties of performing direct experiments on large amounts of irradiated fuels are reviewed - especially in operating power reactors - and the necessity is underlined for fundamental research in two directions: on one hand, the change in the composition of the fuels (chains of heavy nuclei, fission products), and on the other hand the effect of changes in composition on the neutron balance. Before presenting three types of experiments which have been carried out, the importance of the problems associated with the neutron spectra is stressed and the practical methods used for the calculations are briefly described. The systematic irradiation of several types of fuel, followed by their chemical and isotopic analysis has been going on for several years. An outline of the experimental programme is given with a description of the methods employed: {alpha}, {beta}, {gamma} chain for the preparation of samples determination of the plutonium content by coulometry and double isotopic dilution, separation of Boron used in some cases for the measurement of integrated neutron densities. The interpretation of the measurements is discussed with some examples. A second and more recent series of experiments deals with the investigation of lattices, using synthetic fuels (Uranium-Plutonium alloys) as compared to slightly depleted or enriched Uranium Various experiments are considered on heavy water and on cold graphite, then on graphite heated up to 500 C Some results already obtained are listed. These experiments, requiring nearly a metric ton of each type of fuel cannot be pursued in a systematic manner. This is why is developed since several years a method of differential measurement by oscillation, which

  17. Investigations in the upper load range of stratified operation with injection pressures up to 1000 bar; Untersuchungen im oberen Lastbereich des Schichtbetriebes bei Einspritzdruecken bis 1000 bar

    Energy Technology Data Exchange (ETDEWEB)

    Buri, Stefan; Busch, Steve; Kubach, Heiko; Spicher, Ulrich [Karlsruhe Univ. (DE). Inst. fuer Kolbenmaschinen (IFKM)

    2010-07-01

    This paper presents the results of recent research that has been performed on a single-cylinder spray-guided DISI engine at the Institut fuer Kolbenmaschinen. A production multihole injector is used as a baseline and compared with a specially adapted injector at higher injection pressures. Injection pressures of up to 1000 bar are utilized to investigate the combustion and emissions characteristics at the stability limit of stratified combustion. With the modified injector, measurements with the two-color method are applied to analyze this operating condition in terms of soot formation. Included are results for a spark timing variation with 1000 bar injection pressure, an injection pressure variation with constant spark timing, and fuel consumption-optimized engine operating parameters in order to analyze realistic operating points. The benefits of injecting fuel at higher pressures are described, as are the limitations of the experimental setup. (orig.)

  18. Petite motorisation et exploitations maraîchères de taille limitée du Sahel tunisien Partie 2: Evaluation sur le terrain des performances et des coûts de préparation du sol

    Directory of Open Access Journals (Sweden)

    Chehaibi, S.

    2003-01-01

    Full Text Available Low Power Mechanisation and Small-scale Vegetable Production in the Tunisian Sahel Region. Part 2: On the Field Evaluation of Performances and of Soil Preparation Costs. In this study, it was investigated to what extent low power mechanisation could be introduced in vegetable production in the Tunisian Sahel region by evaluating its performance (labour input and field efficiency by means of field experiments in which different traction equipment was used for carrying out several cultivation operations. Furthermore, costs per unit area for soil preparation in both sandy clay and clayish sand were calculated for four different power classes and for small fields. The results showed that two wheel tractors had a real labour input for scuffling between plant rows ranging from 11.3 h/ha to 18.7 h/ha. These inputs ranged from 5.5 h/ha to 6.7 h/ha for tied crops. For mowing, the two wheel tractor had labour inputs of 17.3 and 14.2 h/ha for the first and the second cut, respectively, while for potato digging, the first and the second passage of secondary tillage these values were 11.5, 14.3 and 10.4 h/ha, respectively. Superficial soil preparation by means of a four wheel tractor gave rise to values between 2.7 and 3.5 h/ha. With respect to the cost estimation for soil preparation, the lowest costs were obtained by means of the low power mechanisation. Similar conclusions were drawn for the field efficiencies for the operations investigated. In general, these efficiencies were above 70%.

  19. INFLUENCE DES TEMPERATURES OPERATIONNELLES SUR LA PERFORMANCE D’UN REFRIGERATEUR SOLAIRE A ADSORPTION QUI FONCTIONNE AVEC LE COUPLE CHARBON ACTIF-METHANOL

    OpenAIRE

    H SOUALMI; Z SAADI; A RAHMANI

    2014-01-01

    Le séchage des produits alimentaires au soleil est un moyen efficace, facile et économique pour conserver les aliments, en particulier les fruits. Le séchoir solaire est l'équipement le plus populaire pour le séchage des fruits. En raison de la nature intermittente de l'énergie solaire, le stockage de l'énergie thermique est nécessaire pour assurer un fonctionnement prolongé du séchoir. L'objectif principal de cette étude est d'évaluer l'efficacité du séchoir solaire intégré avec un lit en gr...

  20. Diagnostic performance of alpha-fetoprotein, lens culinaris agglutinin-reactive alpha-fetoprotein, des-gamma carboxyprothrombin, and glypican-3 for the detection of hepatocellular carcinoma: a systematic review and meta-analysis protocol

    Science.gov (United States)

    2013-01-01

    Background Diagnosis of early-stage hepatocellular carcinoma (HCC) followed by curative resection or liver transplantation offers the best chance for long-term patient survival. Clinically, ultrasonography has suboptimal sensitivity for detecting early-stage HCC. Several serological tests including alpha-fetoprotein (AFP), the ratio of lens culinaris agglutinin-reactive alpha-fetoprotein to total AFP (AFP-L3/AFP), des-gamma carboxyprothrombin (DCP), and glypican-3 (GPC-3) have been widely investigated as diagnostic biomarkers for early-stage HCC in at-risk populations. However, these tests are not recommended for routine HCC screening. Our objective is to determine the diagnostic performance of AFP, AFP-L3/AFP, DCP, and GPC-3 for the detection of HCC, particularly early-stage tumors meeting the Milan criteria. Methods/design We will include cross-sectional studies that consecutively or randomly recruit target populations. We will search the Cochrane Library, Medline, Embase, Science Citation Index, and the Chinese National Knowledge Infrastructure. We will also search the MEDION and ARIF databases to identify diagnostic systematic reviews that include primary studies. Reference lists of relevant reviews will be searched for additional trials. Language restrictions will not be applied. Two reviewers will independently screen study eligibility and extract data. Methodological quality will be assessed according to the revised tool for the Quality Assessment of Diagnostic Accuracy Studies (QUADAS-2). Two authors will apply the QUADAS-2 assessment to all the included studies, and any discrepancies will be resolved by the third author. The following test characteristics will be extracted into 2 × 2 tables for all included studies: true positives, false positives, true negatives, and false negatives. Study-specific estimates of sensitivity and specificity with 95% confidence intervals will be displayed in forest plots. When possible, we will use the bivariate random

  1. Fiabilité des structures mécaniques adaptatives: effet de la panne des actionneurs ou des capteurs sur la stabilité

    Science.gov (United States)

    Fall, H.; Charon, W.; Kouta, R.

    2002-12-01

    Ces dernières décennies, des activités significatives dans le monde étaient dirigées autour du contrôle actif. Le but de ces recherches était essentiellement d'améliorer les performances, la fiabilité et la sécurité des systèmes. Notamment dans le cas des structures soumises à des vibrations aléatoires. D'importants travaux ont été consacré à l'utilisation des “matériaux intelligents” comme capteurs et actionneurs. Cette article propose l'analyse de la fiabilité des systèmes mécaniques en étudiant les pannes des actionneurs ou des capteurs. L'effet de ces pannes sur la stabilité et la performance du système y est démontré. Les méthodologies de conception y sont rappelées. Des exemples numériques sont fournis à travers le contrôle d'un panneau sous chargement dynamique pour illustrer la méthode proposée.

  2. Problematique De L'amenagement Des Aires Protegees Au Togo ...

    African Journals Online (AJOL)

    Cette étude s'est basée essentiellement sur la collecte des données, les entretiens et sur les recherches documentaires. Les résultats des différentes investigations montrent que l'aménagement des aires protégées est empêché par un certain nombre de facteurs qui sont liés à un manque de financement, de personnes ...

  3. Alimentation des lapins ( Oryctolagus cuniculus L.) à base de Azolla ...

    African Journals Online (AJOL)

    Les systèmes intégrés de production constituent l'une des voies essentielles pour une agriculture durable. Cette étude a pour but d'évaluer l'effet d'une alimentation à base de Azolla filiculoïdes, Elaeis guineensis, Ipomoea aquatica et Panicum maximum sur les performances zootechniques des lapins et le potentiel nutritif ...

  4. Analyse technico–économique des Aliments densifies sur les ...

    African Journals Online (AJOL)

    Une étude portant sur l'influence des aliments densifiés sur la performance de croissance des boucs roux de Maradi a été conduite entre juillet 2016 à septembre 2016. Quarante deux (42) boucs ont été répartis au hasard en six lots de sept individus. Chaque lot correspond à un aliment ou traitement préparé à partir des.

  5. Numerical investigation of geometric parameter effects on the aerodynamic performance of a Bladeless fan

    OpenAIRE

    Mohammad Jafari; Hossein Afshin; Bijan Farhanieh; Atta Sojoudi

    2016-01-01

    Aerodynamic performance of a Bladeless fan is numerically investigated considering the effect of five geometric parameters. Airflow through this fan was analyzed by simulating a Bladeless fan within a 2 m × 2 m × 4 m room. Analysis of the flow field inside the fan and the evaluation of its performance were obtained by solving conservations of mass and momentum equations for the aerodynamic investigations. In order to design the Bladeless fan an Eppler 473 airfoil profile was used as the cross...

  6. Évaluation des pratiques agricoles des légumes feuilles : le cas des ...

    African Journals Online (AJOL)

    SARAH

    30 sept. 2017 ... ... de Biochimie et Immunologie Appliquée, Centre de Recherche en Sciences Biologiques, Alimentaires et .... l'intoxication des agriculteurs et des consommateurs, ... source d'alimentation en eau et au pouvoir d'achat des.

  7. Uncertainty Analysis of a Fractured Reservoir’s Performance: A Case Study Analyse d’incertitudes des performances d’un réservoir fracturé : étude de cas

    Directory of Open Access Journals (Sweden)

    Khosravi M.

    2012-05-01

    Full Text Available In recent years, the oil industry has given great importance to reservoir management and reservoir uncertainty analysis. The development of a method that can model and quantify uncertainties in reservoir simulation studies in an efficient and practical way is clearly desirable. Different approaches such as Response Surface Methodology (RSM and Monte-Carlo simulation have been used to address the uncertainties. In this paper, response surface method is used to realize the most influential parameters on pressure drop and recovery factor changes, regarding their practical levels of uncertainties during the development of fractured reservoir model. The present approach is performed to magnify the significant parameters and developing compatible and more realistic proxy equation for forecasting oil recovery from a typical low permeable fractured reservoir. The proxy model allows Monte-Carlo analysis to determine sensitivities and the quantification of the impact of uncertainty on production forecasts. Results indicate that the oil recovery is more sensitive to aquifer strength, fracture permeability and block height. In addition, however the interaction between other parameters, such as matrix size, fracture permeability and aquifer volume, showed a degree of importance during this analysis. Monte-Carlo analysis forecasts wide range of oil recovery for this field development. Ces dernières années, l’industrie du pétrole a accordé une grande importance à la gestion et à l’analyse d’incertitudes des réservoirs. Le développement d’une méthode permettant de modéliser et de quantifier les incertitudes au cours des études de simulation de réservoir d’une façon efficace et pratique est clairement souhaitable. Des approches différentes telles que la méthodologie des surfaces de réponse (RSM; Response Surface Methodology et la simulation de Monte-Carlo ont été utilisées pour évaluer les incertitudes. Au sein de cet article, la m

  8. THE INVESTIGATION TO THE SEX OF BODY COMPOSITION AND PHYSICAL PERFORMANCE OF ELITE MASTER ATHLETES

    OpenAIRE

    Aksel ÇELİK; Mert TUNER

    2010-01-01

    This study was performed to investigate the effect of regular aerobic exercise on body composition by bioelektrik impedance analysis (BIA) methods, respiratory function parameters and physical performance levels. 20 men and 10 women, total 30 long-distance elite master athletes who had joined World, European and The Balkans Championships in Athletics and into at least one degree, were included in the study. The body composition such as skeletal muscle mass, body fat weight, Waist-hip ratio an...

  9. On-farm investigation of local chicken biodiversity and performance potentials in rural areas of Jordan

    OpenAIRE

    Abdelqader, A.; Wollny, C. B. A.; Gauly, M.

    2008-01-01

    On-farm surveys were conducted to investigate the biodiversity of local chickens and their performance potential. The study was carried out in rural areas of northern Jordan. A sample of 846 adult local chickens was phenotypically characterized based on morphology, feather colors, comb shape and performance. Body measurements for cluster analyses were recorded on 460 adult females. The most predominant chicken type was the Jordan Baladi (67.3%) followed by the Pakis...

  10. Think different? An investigation of network antecedents and performance consequences of creativity as deviation

    OpenAIRE

    Soda, Giuseppe; Bizzi, Lorenzo

    2012-01-01

    In this study, we investigate how network relations affect project performance through creativity. We challenge previous conceptualizations of creativity by proposing the idea that creative outcomes in project industries can be conceptualized as deviation from past projects and deviation from partners’ projects. While previous research has mostly assumed that network relations are beneficial to performance because they increase innovation and creativity, our conceptualization of creativity al...

  11. Investigation of the Effect of Cultural Adaptation on International Joint Venture Performance

    OpenAIRE

    ÖZORHON, Beliz; ALTUN, Hasan

    2017-01-01

    Internationaljoint ventures (IJVs) have a great importance as a strategic alternative inglobal competition. Cultural differences between partners from differentcountries may cause lower performance levels in such ventures. The majorobjective of this study is to investigate the influence of national andorganizational culture adaptation of partnerson the IJV performance. In this respect, a questionnaire survey wasadministered to medium to large scale contractors,thgat are members of the Turkish...

  12. Do generic strategies impact performance in higher educational institutions? A SEM-based investigation

    OpenAIRE

    Ahlam Mohammad Alzoubi; Okechukwu Lawrence Emeagwali

    2016-01-01

    This study set out to initiate an investigation into the linkage between generic strategy and performance in higher educational institutions and the moderating effect of institution-type. Using structural equation modeling (SEM), it examined the responses of a stratified sample of academics and administrative staff (n= 333) randomly selected from eight universities in northern Cyprus. Findings suggest that while there is a weak effect of differentiation strategy on performance, a strong effec...

  13. Parametric investigation to enhance the performance of a PBI-based high-temperature PEMFC

    International Nuclear Information System (INIS)

    Ferng, Y.M.; Su, A.; Hou, J.

    2014-01-01

    Highlights: • A in-house PBI PEMFC is prepared by the Fuel Cell Center of Yuan Ze University. • Parametric effects to enhance the PBI based PEMFC performance are investigated. • Experiments and simulations are performed to study these parametric effects. • Cell performance is enhanced with the lower PBI loading and higher temperature. • Thinner CL thickness and higher acid doping benefit to the cell performance also. - Abstract: With the advantages of simpler heat and water management, lower CO poisoning, and higher reaction kinetics, the high-temperature polybenzimidazole (PBI)-based proton exchange membrane fuel cell (PEMFC) can be considered as one of the commercialized energy generators in the near future. This paper experimentally and analytically investigates different design and operating parameters to enhance the performance of a PBI-based PEMFC, an in-house cell prepared in the Fuel Cell Center of Yuan Ze University. These parameters studied include PBI loading, operating temperature, gas flowrate, electrode thickness and porosity, and acid doping level. Experiments are performed to study the effects of PBI loading, operating temperature, and gas flowrate on the cell performance. Validated against the measured data of polarization and power curves, a simplified two-dimensional model for this PBI-based PEMFC is also developed to help the experiments to investigate other parameters. Based on the experimental data and the model predictions, the cell performance can be enhanced as the PBI loading is reduced, the operating temperature is elevated. Thinner electrode thickness, smaller porosity, and higher acid doping level are also predicted to benefit to the performance of the PBI-based PEMFC

  14. Investigation of Grid-connected Voltage Source Converter Performance under Unbalanced Faults

    DEFF Research Database (Denmark)

    Jia, Jundi; Yang, Guangya; Nielsen, Arne Hejde

    2016-01-01

    Renewable energy sources (RES) and HVDC links are typically interfaced with the grid by power converters, whose performance during grid faults is significantly different from that of traditional synchronous generators. This paper investigates the performance of grid-connected voltage source...... that the performance of VSCs varies with their control strategies. Negative-sequence current control is necessary to restrict converter current in each phase under unbalanced faults. Among presented control strategies, the balanced current control strategy complies with the present voltage support requirement best...

  15. Experimental and numerical investigation of gas side particulate fouling onto heat exchanger tubes; Etude des differents mecanismes de depot conduisant a l'encrassement particulaire en phase gazeuse des tubes d'echangeurs de chaleur

    Energy Technology Data Exchange (ETDEWEB)

    Bailer, F.

    1998-11-06

    This works deals with gas side particulate fouling onto heat exchanger tubes. An experimental and numerical investigation was carried out. By means of a new testing loop designed for this study the deposit kinetics were obtained in dust-controlled conditions at the beginning of the fouling process, Experimental results pointed out the existence of various transport regimes: for sub-micron particles, convective diffusion augmented by thermophoresis in the presence of a temperature gradient governs the particle deposition: inertial impaction controls the super-micron particles deposition, in the intermediate granulometric range, combined action of particle inertia and thermophoresis must be considered. Moreover, measurements on an other testing loop using a more concentrated aerosol allowed us to point out the modification of the mechanisms with time and the influence of the deposit shape. A numerical model predicting the particle deposition, based on the TRIO software and an Eulerian-Lagrangian approach, was developed and validated against experimental results from the literature and from our study. Numerical approach gave us an accurate understanding of the phenomena by means of local parameters computations. In this way, the different mechanisms which control particulate deposition onto heat exchangers tubes were identified and modeled, especially before the onset of the inertial impaction. (authors)

  16. Attributional Theory in Investigating Public Music Performance in Higher Music Education

    Science.gov (United States)

    Schneider Grings, Ana Francisca; Hentschke, Liane

    2017-01-01

    The purpose of this research was to investigate the causes attributed by undergraduate music students to situations of failure and success in public music performance. Attributional Theory has been used in this research as the theoretical framework to understand how situations of success and failure are interpreted by the person of the activity.…

  17. Expected performance properties of the ASDEX upgrade toroidal field magnet derived from calculations and materials investigations

    International Nuclear Information System (INIS)

    Streibl, B.; Mukherjee, S.

    1989-11-01

    This is a summary of the TF-magnet calculation results for the 1984 phase-II proposal including supplements (also considering disturbances) of the performance of ASDEX Upgrade. Calculation results are as reliable as the assumptions incorporated, so that investigations of materials and design components were always used to complete the calculations. (orig.) [de

  18. Investigating Aerobic, Anaerobic Combine Technical Trainings' Effects on Performance in Tennis Players

    Science.gov (United States)

    Suna, Gürhan; Kumartasli, Mehmet

    2017-01-01

    The aim of this study is to investigate eight-week aerobic, anaerobic combine technical trainings' effects on developments of performance. 21 athletes of tennis proficiency students from Sports Sciences Department were joined to the study voluntarily. Participated in the research athletes' ages' mean was 22,2 ± 0,3 year, lengths' mean was 177,3 ±…

  19. Comparing Child Protective Investigation Performance between Law Enforcement Agencies and Child Welfare Agencies

    Science.gov (United States)

    Jordan, Neil; Yampolskaya, Svetlana; Gustafson, Mara; Armstrong, Mary; McNeish, Roxann; Vargo, Amy

    2011-01-01

    This study examines the comparative effectiveness of using law enforcement agencies for child protective investigation (CPI), in contrast with the traditional approach of CPI conducted by the public child welfare agency. The analysis uses 2006-2007 data from a natural experiment conducted in Florida to show modest differences in performance and…

  20. An Investigation into the Number Sense Performance of Secondary School Students in Turkey

    Science.gov (United States)

    Akkaya, Recai

    2016-01-01

    The purpose of this study is to investigate the number sense performance of secondary school students according to grade level, gender and the components of number sense. A descriptive survey design was used to collect data. A total of 576 secondary school students (291 girls and 285 boys) participated in the study. The results revealed that the…

  1. A Naturalistic Investigation of Media Multitasking While Studying and the Effects on Exam Performance

    Science.gov (United States)

    Patterson, Michael C.

    2017-01-01

    The present study investigated the use of multiple digital media technologies, including social networking platforms, by students while preparing for an examination (media multitasking) and the subsequent effects on exam performance. The level of media multitasking (number of simultaneous media technologies) and duration of study were used as…

  2. Investigating Student Choices in Performing Higher-Level Comprehension Tasks Using TED

    Science.gov (United States)

    Bianchi, Francesca; Marenzi, Ivana

    2016-01-01

    The current paper describes a first experiment in the use of TED talks and open tagging exercises to train higher-level comprehension skills, and of automatic logging of the student's actions to investigate the student choices while performing analytical tasks. The experiment took advantage of an interactive learning platform--LearnWeb--that…

  3. Development of a semiconductor counter telescope with low background for the investigations of charged particles produced in reactions induced by neutrons; Realisation et mise au point d'un telescope a semi-conducteurs et a faible bruit-de-fond pour l'etude des reactions neutronsparticules chargees

    Energy Technology Data Exchange (ETDEWEB)

    Helleboid, J M [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1967-08-15

    A AE-E counter telescope for charged particles (p, d, t) produced in reactions with neutrons has been constructed. The semiconductor counter telescope method allows the investigations of two and three-body reactions {sup 6}Li(n,p), D(n,np)n induced by 14 MeV neutrons. By using a coincidence of associated alpha particle pulses with those ({delta}E,E) in the telescope, the background is considerably reduced for all angles outside the coincidence cone, i.e. larger than 15 deg. (L). For forward angles, the same telescope ({delta}E{sub 2}/E) plus a thin semiconductor ({delta}E{sub 1}) allows keeping a low background. The multiparameter analysing method ({delta}E{sub 1}, {delta}E{sub 2}, E) from the experimental range-energy data gives a linearity, an efficiency and an identifying power which are satisfactory. The identification is performed by differed time on a IBM 7044 computer. (author) [French] On a realise un spectrometre de particules chargees (p, d, t) avec identification des particules, pour l'etude des reactions neutrons-particules chargees. La methode du telescope a semi-conducteurs permet d'effectuer l'etude de reactions a deux corps [{sup 6}Li(n,p)] et de reactions a trois corps [D(n,pn)n] a 14 MeV. L'utilisation de la particule alpha associee en coincidence avec les impulsions ({delta}E,E) du telescope permet d'obtenir un bruit-de-fond tres faible pour tous les angles situes en dehors du cone de coincidence, c'est-a-dire superieurs a {approx_equal} 15 deg. (L). Pour les angles avant, le meme telescope ({delta}E{sub 2}/E) plus un semi-conducteur mince ({delta}E{sub 1}) permet de conserver un faible bruit-de-fond. La methode d'analyse multiparametrique ({delta}E{sub 1}, {delta}E{sub 2}, E) a partir des donnees experimentales parcours-energie, donne une linearite, une efficacite et un pouvoir d'identification satisfaisants. L'identification est effectuee en temps differe sur un calculateur numerique IBM 7044. (auteur)

  4. A longitudinal investigation of work environment stressors on the performance and wellbeing of office workers.

    Science.gov (United States)

    Lamb, S; Kwok, K C S

    2016-01-01

    This study uses a longitudinal within-subjects design to investigate the effects of inadequate Indoor Environmental Quality (IEQ) on work performance and wellbeing in a sample of 114 office workers over a period of 8 months. Participants completed a total of 2261 online surveys measuring perceived thermal comfort, lighting comfort and noise annoyance, measures of work performance, and individual state factors underlying performance and wellbeing. Characterising inadequate aspects of IEQ as environmental stressors, these stress factors can significantly reduce self-reported work performance and objectively measured cognitive performance by between 2.4% and 5.8% in most situations, and by up to 14.8% in rare cases. Environmental stressors act indirectly on work performance by reducing state variables, motivation, tiredness, and distractibility, which support high-functioning work performance. Exposure to environmental stress appears to erode individuals' resilience, or ability to cope with additional task demands. These results indicate that environmental stress reduces not only the cognitive capacity for work, but the rate of work (i.e. by reducing motivation). Increasing the number of individual stress factors is associated with a near linear reduction in work performance indicating that environmental stress factors are additive, not multiplicative. Environmental stressors reduce occupant wellbeing (mood, headaches, and feeling 'off') causing indirect reductions in work performance. Improving IEQ will likely produce small but pervasive increases in productivity. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  5. INFLUENCE DES TEMPERATURES OPERATIONNELLES SUR LA PERFORMANCE D’UN REFRIGERATEUR SOLAIRE A ADSORPTION QUI FONCTIONNE AVEC LE COUPLE CHARBON ACTIF-METHANOL

    Directory of Open Access Journals (Sweden)

    H SOUALMI

    2014-12-01

    Full Text Available Le séchage des produits alimentaires au soleil est un moyen efficace, facile et économique pour conserver les aliments, en particulier les fruits. Le séchoir solaire est l'équipement le plus populaire pour le séchage des fruits. En raison de la nature intermittente de l'énergie solaire, le stockage de l'énergie thermique est nécessaire pour assurer un fonctionnement prolongé du séchoir. L'objectif principal de cette étude est d'évaluer l'efficacité du séchoir solaire intégré avec un lit en gravier comme stockage thermique. L’air dans ce séchoir est sucé naturellement grâce à la cheminé solaire le séchage. Le cabinet de séchage est envisagé théoriquement (CFD.La distribution de la vitesse et de la température de l'air à travers le séchoir solaire ont été présentés durant une journée d’Août et sous les conditions climatiques de Tlemcen (Algérie. L’effet de la présence d'un stockage thermique sur la distribution de la vitesse et de la température du flux d'air et de la température des figues ont été analysés. Les résultats montrent que la conception du séchoir solaire, comportant un stockage thermique augmente les capacités et le rendement du séchoir solaire, par l’augmentation du temps de séchage.

  6. Investigation on steady and unsteady performance of a SCO2 centrifugal compressor with splitters

    Directory of Open Access Journals (Sweden)

    Guo Ding

    2017-01-01

    Full Text Available Supercritical carbon dioxide (SCO2 is widely concerned with its excellent physical properties. Its high density helps to achieve a compact mechanical structure, especially in all kinds of turbomachinery. In this paper, a SCO2 centrifugal compressor with splitter blades is displayed and numerically investigated. A thorough numerical analysis of the steady and unsteady performance of this SCO2 centrifugal compressor is performed in ANSYS-CFX with SST turbulence model. Streamlines, pressure and temperature under steady- and unsteady-state are compared and analyzed. Moreover, the trans-critical phenomenon at the leading edge of the rotor blade and the aerodynamic performance are covered. The results in this paper provide the foundation for the design and numerical investigation of SCO2 centrifugal compressors.

  7. Gestion des risques

    CERN Document Server

    Louisot, Jean-Paul

    2009-01-01

    Depuis le début du lie siècle, la gestion des risques connaît une véritable révolution culturelle. Jusqu'alors fonction technique, centrée autour de l'achat de couverture d'assurances, elle est devenue une discipline managériale et transversale : une valise d'instruments que chaque manager doit connaître et appliquer quels que soient son domaine de compétence et ses missions au sein de l'organisation. En effet, la gestion des risques est une culture qui doit être assimilée par chacun des acteurs. C'est précisément l'ambition des 101 questions rassemblées dans cet ouvrage : apporter à chaque manager d'entreprise, de collectivité, d'établissement de santé..., des réponses claires au " pourquoi " et au " comment " : Comment identifier les risques ? Comment analyser les risques ? Quels sont les objectifs de la gestion des risques ? Une carte des risques pour quoi faire ? Pourquoi faut-il financer les risques ? Les entreprises ont-elles des responsabilités pénales ? En quoi consiste la gestion...

  8. La gouvernance des risques naturels et la problematique des ...

    African Journals Online (AJOL)

    Depuis quelques années, la gouvernance des risques naturels dus aux inondations remet en cause les processus de mise en oeuvre des politiques urbaines et la qualité de la structure des aménagements dans les grandes villes du Golfe de Guinée. La perception de la gouvernance et l'application des politiques de ...

  9. Visualisation des propriétés capillaires des roches réservoir Visualizing the Capillary Properties of Reservoir Rocks

    Directory of Open Access Journals (Sweden)

    Zinszner B.

    2006-11-01

    Full Text Available Cet article décrit des expériences de drainage par centrifugation et d'imbibition par ascension capillaire réalisées avec des résines époxy colorées. Après polymérisation, l'observation des lames minces permet de localiser les fluides mouillants et non mouillants. Après avoir décrit les modes opératoires en insistant sur l'analyse des paramètres expérimentaux, on donne des exemples d'applications à la géologie de réservoir. Deux points sont développés : les études de perméabilités et les modèles de réservoir qui permettent d'étudier la répartition du fluide mouillant et des fractions déplaçables ou piégées du fluide non mouillant. This article describes drainage experiments by centrifuge method and imbibition by capillary rise performed with colored epoxy resins. After polymerization, analysis of thin sections serves to situate the wetting and nonwetting fluids. After describing the operating methods with em-phasis on the analysis of experimental parameters, the article gives examples of applications to reservoir geology. The following two points are developed : (i permeability investigations and (ii reservoir modelswhich can be used to analyze the distribution of the wetting fluid and the movable or trapped fractions of the nonwetting fluid

  10. Fine tuning of work practices of common radiological investigations performed using computed radiography system

    International Nuclear Information System (INIS)

    Livingstone, Roshan S.; Timothy Peace, B.S.; Sunny, S.; Victor Raj, D.

    2007-01-01

    Introduction: The advent of the computed radiography (CR) has brought about remarkable changes in the field of diagnostic radiology. A relatively large cross-section of the human population is exposed to ionizing radiation on account of common radiological investigations. This study is intended to audit radiation doses imparted to patients during common radiological investigations involving the use of CR systems. Method: The entrance surface doses (ESD) were measured using thermoluminescent dosimeters (TLD) for various radiological investigations performed using the computed radiography (CR) systems. Optimization of radiographic techniques and radiation doses was done by fine tuning the work practices. Results and conclusion: Reduction of radiation doses as high as 47% was achieved during certain investigations with the use of optimized exposure factors and fine-tuned work practices

  11. Investigating performance of microchannel evaporators for automobile air conditioning with different port structures

    Directory of Open Access Journals (Sweden)

    Guoliang Zhou

    2017-08-01

    Full Text Available Microchannel evaporator has been widely applied in automobile air conditioning, while it faces the problem of refrigerant maldistribution which deteriorates the thermal performance of evaporator. In this study, the performances of microchannel evaporators with different port structures are experimentally investigated for purpose of reducing evaporator pressure drop. Four evaporator samples with different port number and hydraulic diameter are made for this study. The performances of the evaporator samples are tested on a psychometric calorimeter test bench with the refrigerant R-134A at a real automobile air conditioning. The results on the variations of the evaporator pressure drop and evaporator surface temperature distribution are presented and analyzed. By studying the performance of an evaporator, seeking proper port structure is an approach to reduce refrigerant pressure drop as well as improve refrigerant distribution.

  12. Experimental investigation on charging and discharging performance of absorption thermal energy storage system

    International Nuclear Information System (INIS)

    Zhang, Xiaoling; Li, Minzhi; Shi, Wenxing; Wang, Baolong; Li, Xianting

    2014-01-01

    Highlights: • A prototype of ATES using LiBr/H 2 O was designed and built. • Charging and discharging performances of ATES system were investigated. • ESE and ESD for cooling, domestic hot water and heating were obtained. - Abstract: Because of high thermal storage density and little heat loss, absorption thermal energy storage (ATES) is known as a potential thermal energy storage (TES) technology. To investigate the performance of the ATES system with LiBr–H 2 O, a prototype with 10 kW h cooling storage capacity was designed and built. The experiments demonstrated that charging and discharging processes are successful in producing 7 °C chilled water, 65 °C domestic hot water, or 43 °C heating water to meet the user’s requirements. Characteristics such as temperature, concentration and power variation of the ATES system during charging and discharging processes were investigated. The performance of the ATES system for supplying cooling, heating or domestic hot water was analyzed and compared. The results indicate that the energy storage efficiencies (ESE) for cooling, domestic hot water and heating are 0.51, 0.97, 1.03, respectively, and the energy storage densities (ESD) for cooling, domestic hot water and heating reach 42, 88, 110 kW h/m 3 , respectively. The performance is better than those of previous TES systems, which proves that the ATES system using LiBr–H 2 O may be a good option for thermal energy storage

  13. Experimental investigation on Heat Transfer Performance of Annular Flow Path Heat Pipe

    International Nuclear Information System (INIS)

    Kim, In Guk; Kim, Kyung Mo; Jeong, Yeong Shin; Bang, In Cheol

    2015-01-01

    Mochizuki et al. was suggested the passive cooling system to spent nuclear fuel pool. Detail analysis of various heat pipe design cases was studied to determine the heat pipes cooling performance. Wang et al. suggested the concept PRHRS of MSR using sodium heat pipes, and the transient performance of high temperature sodium heat pipe was numerically simulated in the case of MSR accident. The meltdown at the Fukushima Daiichi nuclear power plants alarmed to the dangers of station blackout (SBO) accident. After the SBO accident, passive decay heat removal systems have been investigated to prevent the severe accidents. Mochizuki et al. suggested the heat pipes cooling system using loop heat pipes for decay heat removal cooling and analysis of heat pipe thermal resistance for boiling water reactor (BWR). The decay heat removal systems for pressurized water reactor (PWR) were suggested using natural convection mechanisms and modification of PWR design. Our group suggested the concept of a hybrid heat pipe with control rod as Passive IN-core Cooling System (PINCs) for decay heat removal for advanced nuclear power plant. Hybrid heat pipe is the combination of the heat pipe and control rod. In the present research, the main objective is to investigate the effect of the inner structure to the heat transfer performance of heat pipe containing neutron absorber material, B 4 C. The main objective is to investigate the effect of the inner structure in heat pipe to the heat transfer performance with annular flow path. ABS pellet was used instead of B 4 C pellet as cylindrical structures. The thermal performances of each heat pipes were measured experimentally. Among them, concentric heat pipe showed the best performance compared with others. 1. Annular evaporation section heat pipe and annular flow path heat pipe showed heat transfer degradation. 2. AHP also had annular vapor space and contact cooling surface per unit volume of vapor was increased. Heat transfer coefficient of

  14. An investigation on how TQM influences employee performance: A case study of banking industry

    Directory of Open Access Journals (Sweden)

    Saeed Hakami Nasab

    2014-01-01

    Full Text Available This paper presents an empirical investigation to study the relationship between employee performance and TQM. The proposed study of this paper designs two questionnaires for TQM and performance measurement and distributes them among some employees who worked for one of Iranian banks in city of Semnan, Iran. The result of Kolmogorov–Smirnov test confirms that all data are normally distributed and the study uses Pearson correlation to investigate the relationship between various components of the survey. The result of the implementation of Pearson correlation ratio indicates that there was a positive and meaningful relationship between employee performance and TQM components (r=4.6223, P-value=0.000. In addition, there are some positive and meaningful relationships between TQM components and employee performance. The highest correlation belongs to relationship between employee performance and feedback (r=4.6223, P-value=0.000 followed by training and development (r = 0.441, P-value = 0.000 and communication (r = 4.2861, P-value = 0.000.

  15. Investigating the effect of job stress and emotional intelligence on job performance

    Directory of Open Access Journals (Sweden)

    Mojtaba Rafiee

    2013-09-01

    Full Text Available Researchers and scholars of management and behavioral sciences have tried to determine effective factors, which influence on efficiency and effectiveness in order to increase organization performance and they have tried to identify factors, which create job stress. In this research, we investigate the effect of job stress on job performance through emotional, organizational and moral intelligence. The study is a descriptive-analytic one, which is based on correlation, uses survey method to gather data and they are analyzed using structural equation modeling. The population of this research includes all the personnel of Registry Organization in Arak city. The results suggest that job stress influences on job performance through organizational intelligence and moral intelligence, but job stress does not influence on job performance through emotional intelligence. Regarding research hypotheses, results and findings after analyzing obtained data suggest that job stress influences on emotional, organizational and moral intelligence, but job stress does not influence on job performance. In addition, the results show that organizational and moral intelligence influence on job performance but emotional intelligence does not influence on job performance.

  16. An investigation of racing performance and whip use by jockeys in thoroughbred races.

    Directory of Open Access Journals (Sweden)

    David Evans

    Full Text Available Concerns have been expressed concerning animal-welfare issues associated with whip use during Thoroughbred races. However, there have been no studies of relationships between performance and use of whips in Thoroughbred racing. Our aim was to describe whip use and the horses' performance during races, and to investigate associations between whip use and racing performance. Under the Australian Racing Board (ARB rules, only horses that are in contention can be whipped, so we expected that whippings would be associated with superior performance, and those superior performances would be explained by an effect of whipping on horse velocities in the final 400 m of the race. We were also interested to determine whether performance in the latter sections of a race was associated with performance in the earlier sections of a race. Measurements of whip strikes and sectional times during each of the final three 200 metre (m sections of five races were analysed. Jockeys in more advanced placings at the final 400 and 200 m positions in the races whipped their horses more frequently. Horses, on average, achieved highest speeds in the 600 to 400 m section when there was no whip use, and the increased whip use was most frequent in the final two 200 m sections when horses were fatigued. This increased whip use was not associated with significant variation in velocity as a predictor of superior placing at the finish.

  17. Investigation on non-equilibrium performance of composite adsorbent for resorption refrigeration

    International Nuclear Information System (INIS)

    Jiang, L.; Wang, L.W.; Zhou, Z.S.; Zhu, F.Q.; Wang, R.Z.

    2016-01-01

    Highlights: • Performance of resorption refrigeration is analyzed based on non-equilibrium reaction process. • The porous matrix improves the heat and mass performance of composite adsorbent. • The actual desorption process has the significant hysteresis phenomenon. • The highest energy efficiency of Manganese and Calcium chloride working pair is 0.272. - Abstract: The aims of this paper is to indicate that the non-equilibrium adsorption testing results is more suitable for prediction of real refrigeration performance than equilibrium data. Therefore, a test unit is constructed to test the non-equilibrium performance of different composite adsorbents. The adsorption and desorption quantity are measured and calculated by smart differential pressure transmitter. The non-equilibrium adsorption performances of working pair of Manganese chloride–ammonia, Calcium chloride–ammonia and Ammonium chloride–ammonia are investigated respectively. Results show that hysteresis phenomena happens obviously in non-equilibrium desorption process, which is related with dual variables rather than single variable. Based on the testing results, resorption refrigeration performance is analyzed, in which Manganese chloride is used as high temperature salt (HTS), and Calcium chloride, Ammonium chloride are selected as low temperature salt (LTS) for comparison. Results show that the highest COP and SCP for resorption refrigeration are about 0.272 and 45.6 W/kg, respectively. Performance of Manganese chloride–Calcium chloride and Manganese chloride–Ammonium chloride working pairs are much lower when compared with theoretical data.

  18. Investigation of the Performance of Multidimensional Equating Procedures for Common-Item Nonequivalent Groups Design

    Directory of Open Access Journals (Sweden)

    Burcu ATAR

    2017-12-01

    Full Text Available In this study, the performance of the multidimensional extentions of Stocking-Lord, mean/mean, and mean/sigma equating procedures under common-item nonequivalent groups design was investigated. The performance of those three equating procedures was examined under the combination of various conditions including sample size, ability distribution, correlation between two dimensions, and percentage of anchor items in the test. Item parameter recovery was evaluated calculating RMSE (root man squared error and BIAS values. It was found that Stocking-Lord procedure provided the smaller RMSE and BIAS values for both item discrimination and item difficulty parameter estimates across most conditions.

  19. Améliorer le rendement des zones urbaines dans le contexte du ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... dans la croissance des entreprises, ainsi que dans la question connexe de ... qu'il appellera l'indice de performance des zones urbaines aux fins de cette analyse. ... privé et l'utilisation efficace des ressources publiques limitées du Kenya.

  20. Resource specialization, customer orientation, and firm performance: an empirical investigation of valuable resources

    DEFF Research Database (Denmark)

    Sørensen, Hans Eibe

    2011-01-01

    This study contributes to the strategic marketing research by empirically investigating the role of customer orientation in explaining how firms leverage their specialized but vulnerable resources. The aim is thus to explore a subset of the means by which resources become valuable to the firm...... – the first criterion for a strategic resource. Hypotheses are developed and tested using CEO questionnaire responses from a sample of manufacturing firms and census accounting data. The results show that there is a strong link between industry-specific resources and return on assets for firms with high...... levels of customer orientation. We also report that firm-specific resources are unrelated to firm performance and that a customer orientation – investigated in isolation, may be detrimental to firm performance. Research and managerial implications are discussed....

  1. Investigation of Micro- and Macro-Scale Transport Processes for Improved Fuel Cell Performance

    Energy Technology Data Exchange (ETDEWEB)

    Gu, Wenbin [General Motors LLC, Pontiac, MI (United States)

    2014-08-29

    This report documents the work performed by General Motors (GM) under the Cooperative agreement No. DE-EE0000470, “Investigation of Micro- and Macro-Scale Transport Processes for Improved Fuel Cell Performance,” in collaboration with the Penn State University (PSU), University of Tennessee Knoxville (UTK), Rochester Institute of Technology (RIT), and University of Rochester (UR) via subcontracts. The overall objectives of the project are to investigate and synthesize fundamental understanding of transport phenomena at both the macro- and micro-scales for the development of a down-the-channel model that accounts for all transport domains in a broad operating space. GM as a prime contractor focused on cell level experiments and modeling, and the Universities as subcontractors worked toward fundamental understanding of each component and associated interface.

  2. Performance investigations on modified vertical axis water turbine: Combination of lift and drag

    Science.gov (United States)

    Baumatary, Mithinga; Biswas, Angimitra; Misra, Rahul Dev

    2018-04-01

    Extracting energy from the water has been followed since decades due to environmental friendly. Now a days everyone is running after clean energy, therefore extracting energy from the water turbine is a good approach. The main idea of this study is to investigate the performance of a new design turbine which is a combination of the concepts of lift and drag turbine. The main purpose of the study is to accumulate maximum energy by considering advantages of two different types of turbine. The maximum coefficient of power is 0.141 at free stream velocity of 0.5 m/s. The modified new design turbine consist of straight section and the curve section. The length of the straight section influences the performance of the turbine. Investigation on the optimization of straight section has been carried out in this paper. As this type of turbine have opted the advantages of both lift and drag it has turned out to be fruitful.

  3. Photonique des Morphos

    CERN Document Server

    Berthier, Serge

    2010-01-01

    La photonique est déjà présente dans notre vie quotidienne, et on attend maintenant que la manipulation des photons permette aussi le traitement logique des informations. Cependant, l’élément de base qui permet cette manipulation de la lumière, le cristal photonique, est d’une réalisation complexe et mal contrôlée. Dans la course à la maîtrise de la lumière, les structures photoniques naturelles ont beaucoup à nous apprendre. C’est ce que nous montre Serge Berthier qui étudie dans ce livre la structure des écailles des Morphos. Tenant compte de l’essor récent des approches biomimétiques, il présente de manière détaillée plus de dix-huit techniques expérimentales utilisées pour ses analyses, ainsi que les diverses approches théoriques développées pour la modélisation de structures multi-échelles complexes. Première étude quasi-exhaustive des structures fines d’un genre et des propriétés optiques ainsi que colorimétriques générées, ce livre fournit aux entomologiste...

  4. Droit des organisations internationales

    CERN Document Server

    Sorel, Jean-Marc; Ndior, Valère

    2013-01-01

    Cet ouvrage collectif offre aux enseignants et chercheurs en droit international, aux praticiens et aux étudiants, une analyse actualisée du droit des organisations internationales. Il dresse en cinq parties un tableau, illustré par des exemples variés, des problématiques que soulève le phénomène polymorphe d institutionnalisation de la société internationale. La première partie est consacrée au phénomène des « organisations internationales », sous l angle à la fois de l institutionnalisation progressive des relations internationales et de la difficulté à cerner une catégorie unifiée. La deuxième partie rend compte de la création, de la disparition et des mutations des organisations internationales, ici envisagées comme systèmes institutionnels et ordres juridiques dérivés. La troisième partie analyse l autonomie que l acquisition de la personnalité juridique et de privilèges et immunités, un organe administratif intégré, un personnel ou un budget propres confèrent aux organi...

  5. The X-Files: Investigating Alien Performance in a Thin-client World

    OpenAIRE

    Gunther, Neil J.

    2000-01-01

    Many scientific applications use the X11 window environment; an open source windows GUI standard employing a client/server architecture. X11 promotes: distributed computing, thin-client functionality, cheap desktop displays, compatibility with heterogeneous servers, remote services and administration, and greater maturity than newer web technologies. This paper details the author's investigations into close encounters with alien performance in X11-based seismic applications running on a 200-n...

  6. Operation performance investigation of ground-coupled heat-pump system for temperate region

    OpenAIRE

    Yi Man; Hongxing Yang; Jinggang Wang; Zhaohong Fang

    2010-01-01

    In order to investigate the operation performance of ground-coupled heat-pump (GCHP) system, an analytical simulation model of GCHP system on short time-step basis and a computer program based on this model to predict system operating parameters are developed in this study. Besides, detailed on-site experiments on GCHP test rig installed in a temperate region of China are carried out. The temperature distributions of borehole as well as ground around borehole at different depths are evaluated...

  7. Socially acceptable enterprising of the Netherlands in China. Investigation of the performance of Dutch multinationals

    International Nuclear Information System (INIS)

    Bakker, H.G.M.; Koppert, P.

    2005-01-01

    An effective tool has been developed by means of which companies can investigate their foreign offices or establishments with respect to people (labor conditions), planet (environmental effects), and profit (economic efficiency). In order to test the tool, offices and establishments of multinational enterprises in both the Netherlands and in China were visited. The Dutch offices perform better than the offices in China, although claims of the main office of the multinationals could not be verified on the 'shop-floor' [nl

  8. SLIPPER PERFORMANCE INVESTIGATION IN AXIAL PISTON PUMPS AND MOTORS-FLOW AND VISCOUS POWER LOSSES

    Directory of Open Access Journals (Sweden)

    A. Osman KURBAN

    1997-01-01

    Full Text Available In this study, the slippers being the most effective on the performance of swash plate type axial piston pumps and motors, which is a good example of hydrodynamic-hydrostatic bearing applications, have been investigated. With respect to this, having derived the viscous moment loss, viscous flow leakage loss and power loss equations, the variations of these parameters under different operating conditions have been examined experimentally.

  9. A Comprehensive Investigation on the Short Circuit Performance of MW-level IGBT Power Modules

    DEFF Research Database (Denmark)

    Wu, Rui; Reigosa, Paula Diaz; Iannuzzo, Francesco

    2015-01-01

    This paper investigates the short circuit performance of commercial 1.7 kV / 1 kA IGBT power modules by means of a 6 kA Non-Destructive-Tester. A mismatched current distribution among the parallel chips has been observed, which can reduce the short circuit capability of the IGBT power module unde...... short circuit conditions. Further Spice simulations reveal that the stray parameters inside the module play an important role in contributing to such a phenomenon....

  10. Comparing child protective investigation performance between law enforcement agencies and child welfare agencies.

    Science.gov (United States)

    Jordan, Neil; Yampolskaya, Svetlana; Gustafson, Mara; Armstrong, Mary; McNeish, Roxann; Vargo, Amy

    2011-01-01

    This study examines the comparative effectiveness of using law enforcement agencies for child protective investigation (CPI), in contrast with the traditional approach of CPI conducted by the public child welfare agency. The analysis uses 2006-2007 data from a natural experiment conducted in Florida to show modest differences in performance and cost-efficiency between the two approaches to CPI. These findings may have implications for other states considering outsourcing CPI to law enforcement.

  11. Numerical investigation of aerodynamic performance of darrieus wind turbine based on the magnus effect

    OpenAIRE

    L Khadir; H Mrad

    2016-01-01

    The use of several developmental approaches is the researchers’ major preoccupation with the DARRIEUS wind turbine. This paper presents the first approach and results of a wide computational investigation on the aerodynamics of a vertical axis DARRIEUS wind turbine based on the MAGNUS effect. Consequently, wind tunnel tests were carried out to ascertain overall performance of the turbine and two-dimensional unsteady computational fluid dynamics (CFD) models were generated to help understand t...

  12. 12 Conception et réalisation des capteurs hybrides photovoltaïque ...

    African Journals Online (AJOL)

    user

    hybrides photovoltaïque-thermiques à air intégrables en toitures des bâtiments. Pour ces .... de la position du moyen de stockage sur les performances du système. ... propriétés thermo-physiques des matériaux sont supposées constantes et .... L'évolution des températures de tous les éléments des capteurs atteignent le.

  13. Laboratory investigation of the performances of cement and fly ash modified asphalt concrete mixtures

    Directory of Open Access Journals (Sweden)

    Suched Likitlersuang

    2016-09-01

    Full Text Available The influence of filler materials on volumetric and mechanical performances of asphalt concrete was investigated in this study. The AC60/70 asphalt binder incorporating with cement and fly ash as filler materials was mixed with limestone following the Marshall mix design method. The filler contents of cement and/or fly ash were varied. The non-filler asphalt concrete mixtures of the AC60/70 and the polymer modified asphalt were prepared for the purpose of comparison. The investigation programme includes the indirect tensile test, the resilient modulus test and the dynamic creep test. The tests are conducted under the humid temperate environments. All tests were then carried out under standard temperature (25 °C and high temperature (55 °C by using a controlled temperature chamber via the universal testing machine. The wet-conditioned samples were prepared to investigate the moisture susceptibility. Results show that cement and/or fly ash were beneficial in terms of improved strength, stiffness and stripping resistance of asphalt mixture. In addition, the combined use of cement and fly ash can enhance rutting resistance at wet and high temperature conditions. The results indicate that the strength, stiffness and moisture susceptibility performances of the asphalt concrete mixtures improved by filler are comparable to the performance of the polymer modified asphalt mixture. Keywords: Asphalt concrete, Filler, Resilient modulus, Dynamic creep test, Moisture susceptibility

  14. Single-Site Palladium(II) Catalyst for Oxidative Heck Reaction: Catalytic Performance and Kinetic Investigations

    Energy Technology Data Exchange (ETDEWEB)

    Duan, Hui; Li, Mengyang; Zhang, Guanghui; Gallagher, James R.; Huang, Zhiliang; Sun, Yu; Luo, Zhong; Chen, Hongzhong; Miller, Jeffrey T.; Zou, Ruqiang; Lei, Aiwen; Zhao, Yanli

    2015-01-01

    ABSTRACT: The development of organometallic single-site catalysts (SSCs) has inspired the designs of new heterogeneous catalysts with high efficiency. Nevertheless, the application of SSCs in certain modern organic reactions, such as C-C bond formation reactions, has still been less investigated. In this study, a single-site Pd(II) catalyst was developed, where 2,2'-bipyridine-grafted periodic mesoporous organosilica (PMO) was employed as the support of a Pd(II) complex. The overall performance of the single-site Pd(II) catalyst in the oxidative Heck reaction was then investigated. The investigation results show that the catalyst displays over 99% selectivity for the product formation with high reaction yield. Kinetic profiles further confirm its high catalytic efficiency, showing that the rate constant is nearly 40 times higher than that for the free Pd(II) salt. X-ray absorption spectroscopy reveals that the catalyst has remarkable lifetime and recyclability.

  15. [Investigation of team processes that enhance team performance in business organization].

    Science.gov (United States)

    Nawata, Kengo; Yamaguchi, Hiroyuki; Hatano, Toru; Aoshima, Mika

    2015-02-01

    Many researchers have suggested team processes that enhance team performance. However, past team process models were based on crew team, whose all team members perform an indivisible temporary task. These models may be inapplicable business teams, whose individual members perform middle- and long-term tasks assigned to individual members. This study modified the teamwork model of Dickinson and McIntyre (1997) and aimed to demonstrate a whole team process that enhances the performance of business teams. We surveyed five companies (member N = 1,400, team N = 161) and investigated team-level-processes. Results showed that there were two sides of team processes: "communication" and "collaboration to achieve a goal." Team processes in which communication enhanced collaboration improved team performance with regard to all aspects of the quantitative objective index (e.g., current income and number of sales), supervisor rating, and self-rating measurements. On the basis of these results, we discuss the entire process by which teamwork enhances team performance in business organizations.

  16. Numerical Investigation on Aerodynamic and Combustion Performance of Chevron Mixer Inside an Afterburner.

    Science.gov (United States)

    Yong, Shan; JingZhou, Zhang; Yameng, Wang

    2014-11-01

    To improve the performance of the afterburner for the turbofan engine, an innovative type of mixer, namely, the chevron mixer, was considered to enhance the mixture between the core flow and the bypass flow. Computational fluid dynamics (CFD) simulations investigated the aerodynamic performances and combustion characteristics of the chevron mixer inside a typical afterburner. Three types of mixer, namely, CC (chevrons tilted into core flow), CB (chevrons tilted into bypass flow), and CA (chevrons tilted into core flow and bypass flow alternately), respectively, were studied on the aerodynamic performances of mixing process. The chevrons arrangement has significant effect on the mixing characteristics and the CA mode seems to be advantageous for the generation of the stronger streamwise vortices with lower aerodynamic loss. Further investigations on combustion characteristics for CA mode were performed. Calculation results reveal that the local temperature distribution at the leading edge section of flame holder is improved under the action of streamwise vortices shedding from chevron mixers. Consequently, the combustion efficiency increased by 3.5% compared with confluent mixer under the same fuel supply scheme.

  17. Investigation Procedure of Magnetic Performances of NdFeB Permanent Magnets

    DEFF Research Database (Denmark)

    Calin, Marius-Daniel; Helerea, Elena; Ritchie, Ewen

    2011-01-01

    The permanent magnet applications based on carbon steel magnets, hard ferrites and AlNiCo magnets classes are renewed with new classes of advanced magnetic materials based on rare earth elements, the Sm-Co and NdFeB types. Performance increase of the hard magnetic materials and their use in speci......The permanent magnet applications based on carbon steel magnets, hard ferrites and AlNiCo magnets classes are renewed with new classes of advanced magnetic materials based on rare earth elements, the Sm-Co and NdFeB types. Performance increase of the hard magnetic materials and their use...... in specific applications impose also great advances in the field of magnetic measurement. New researches need to be validated in order to investigate the NdFeB permanent magnets performances, including their stability under different thermal operational regimes. In this paper a specific investigation...... procedure of magnetic performances of NdFeB permanent magnets in correlation with the range of operating temperature is proposed based on modern hysteresisgraph method and impulse magnetization technique....

  18. Investigation on heat transfer characteristics and flow performance of Methane at supercritical pressures

    Science.gov (United States)

    Xian, Hong Wei; Oumer, A. N.; Basrawi, F.; Mamat, Rizalman; Abdullah, A. A.

    2018-04-01

    The aim of this study is to investigate the heat transfer and flow characteristic of cryogenic methane in regenerative cooling system at supercritical pressures. The thermo-physical properties of supercritical methane were obtained from the National institute of Standards and Technology (NIST) webbook. The numerical model was developed based on the assumptions of steady, turbulent and Newtonian flow. For mesh independence test and model validation, the simulation results were compared with published experimental results. The effect of four different performance parameter ranges namely inlet pressure (5 to 8 MPa), inlet temperature (120 to 150 K), heat flux (2 to 5 MW/m2) and mass flux (7000 to 15000 kg/m2s) on heat transfer and flow performances were investigated. It was found that the simulation results showed good agreement with experimental data with maximum deviation of 10 % which indicates the validity of the developed model. At low inlet temperature, the change of specific heat capacity at near-wall region along the tube length was not significant while the pressure drop registered was high. However, significant variation was observed for the case of higher inlet temperature. It was also observed that the heat transfer performance and pressure drop penalty increased when the mass flux was increased. Regarding the effect of inlet pressure, the heat transfer performance and pressure drop results decreased when the inlet pressure is increased.

  19. Experimental investigation on performance of crossflow wind turbine as effect of blades number

    Science.gov (United States)

    Kurniawati, Diniar Mungil; Tjahjana, Dominicus Danardono Dwi Prija; Santoso, Budi

    2018-02-01

    Urban living is one of the areas with large electrical power consumption that requires a power supply that is more than rural areas. The number of multi-storey buildings such as offices, hotels and several other buildings that caused electricity power consumption in urban living is very high. Therefore, energy alternative is needed to replace the electricity power consumption from government. One of the utilization of renewable energy in accordance with these conditions is the installation of wind turbines. One type of wind turbine that is now widely studied is a crossflow wind turbines. Crossflow wind turbine is one of vertical axis wind turbine which has good self starting at low wind speed condition. Therefore, the turbine design parameter is necessary to know in order to improve turbine performance. One of wind turbine performance parameter is blades number. The main purpose of this research to investigate the effect of blades number on crossflow wind turbine performance. The design of turbine was 0.4 × 0.4 m2 tested by experimental method with configuration on three kinds of blades number were 8,16 and 20. The turbine investigated at low wind speed on 2 - 5 m/s. The result showed that best performance on 16 blade number.

  20. Investigation of microalgae HTL fuel effects on diesel engine performance and exhaust emissions using surrogate fuels

    International Nuclear Information System (INIS)

    Hossain, Farhad M.; Nabi, Md. Nurun; Rainey, Thomas J.; Bodisco, Timothy; Rahman, Md. Mostafizur; Suara, Kabir; Rahman, S.M.A.; Van, Thuy Chu; Ristovski, Zoran; Brown, Richard J.

    2017-01-01

    Highlights: • Development of a microalgae HTL surrogate of biocrude fuel using chemical compounds. • Physiochemical properties of surrogate blends were analysed. • Experimentally investigated diesel engine performance and emissions using surrogate fuels. • No significant changes in engine performance were observed with HTL surrogate blends. • Major emissions including PM, PN and CO were reduced significantly with increasing of NOx emission. - Abstract: This paper builds on previous work using surrogate fuel to investigate advanced internal combustion engine fuels. To date, a surrogate fuel of this nature has not been used for microalgae hydrothermal liquefaction (HTL) biocrude. This research used five different chemical groups found in microalgae HTL biocrude to design a surrogate fuel. Those five chemical groups constitute around 65% (by weight) of a microalgae biocrude produced by HTL. Weight percentage of the microalgae HTL biocrude chemical compounds were used to design the surrogate fuel, which was miscible with diesel at all percentages. The engine experiments were conducted on a EURO IIIA turbocharged common-rail direct-injection six-cylinder diesel engine to test engine performance and emissions. Exhaust emissions, including particulate matter and other gaseous emissions, were measured with the surrogate fuel and a reference diesel fuel. Experimental results showed that without significantly deteriorating engine performance, lower particulate mass, particulate number and CO emissions were observed with a penalty in NOx emissions for all surrogate blends compared to those of the reference diesel.

  1. Systematic investigation of the fatigue performance of a friction stir welded low alloy steel

    International Nuclear Information System (INIS)

    Toumpis, Athanasios; Galloway, Alexander; Molter, Lars; Polezhayeva, Helena

    2015-01-01

    Highlights: • The fatigue behaviour of a friction stir welded low alloy steel has been assessed. • The welds’ fatigue lives outperform the International Institute of Welding’s recommendations for fusion welds. • The slow weld exhibits the best fatigue performance of the investigated welds. • Fracture surface analysis shows that minor embedded flaws do not offer crack initiation sites. • Process-related surface breaking flaws have a significant effect on the fatigue life. - Abstract: A comprehensive fatigue performance assessment of friction stir welded DH36 steel has been undertaken to address the relevant knowledge gap for this process on low alloy steel. A detailed set of experimental procedures specific to friction stir welding has been put forward, and the consequent study extensively examined the weld microstructure and hardness in support of the tensile and fatigue testing. The effect of varying welding parameters was also investigated. Microstructural observations have been correlated to the weldments’ fatigue behaviour. The typical fatigue performance of friction stir welded steel plates has been established, exhibiting fatigue lives well above the weld detail class of the International Institute of Welding even for tests at 90% of yield strength, irrespective of minor instances of surface breaking flaws which have been identified. An understanding of the manner in which these flaws impact on the fatigue performance has been established, concluding that surface breaking irregularities such as these produced by the tool shoulder’s features on the weld top surface can be the dominant factor for crack initiation under fatigue loading

  2. Investigating the effects of ICT on innovation and performance of European hospitals: an exploratory study.

    Science.gov (United States)

    Arvanitis, Spyros; Loukis, Euripidis N

    2016-05-01

    Hospitals are making big investments in various types of ICT, so it is important to investigate their effects on innovation and performance. This paper presents an empirical study in this direction, based on data for 743 hospitals from 18 European countries. We specified and estimated econometrically five equations: one for product innovation, one for process innovation and three equations for the three different dimensions of (ICT-enabled) hospital performance. All five equations included various ICT-related variables reflecting ICT infrastructure and a series of important ICT applications, some of them hospital-specific, and some others of general business use, and also ICT personnel (viewed as a kind of 'soft' ICT investment), while the performance equations also included the two innovation measures.

  3. An Investigation of the Performance of the Colored Gauss-Seidel Solver on CPU and GPU

    International Nuclear Information System (INIS)

    Yoon, Jong Seon; Choi, Hyoung Gwon; Jeon, Byoung Jin

    2017-01-01

    The performance of the colored Gauss–Seidel solver on CPU and GPU was investigated for the two- and three-dimensional heat conduction problems by using different mesh sizes. The heat conduction equation was discretized by the finite difference method and finite element method. The CPU yielded good performance for small problems but deteriorated when the total memory required for computing was larger than the cache memory for large problems. In contrast, the GPU performed better as the mesh size increased because of the latency hiding technique. Further, GPU computation by the colored Gauss–Siedel solver was approximately 7 times that by the single CPU. Furthermore, the colored Gauss–Seidel solver was found to be approximately twice that of the Jacobi solver when parallel computing was conducted on the GPU.

  4. Design and Performance Investigation for the Optical Combinational Networks at High Data Rate

    Science.gov (United States)

    Tripathi, Devendra Kr.

    2017-05-01

    This article explores performance study for optical combinational designs based on nonlinear characteristics with semiconductor optical amplifier (SOA). Two configurations for optical half-adder with non-return-to-zero modulation pattern altogether with Mach-Zehnder modulator, interferometer at 50-Gbps data rate have been successfully realized. Accordingly, SUM and CARRY outputs have been concurrently executed and verified for their output waveforms. Numerical simulations for variation of data rate and key design parameters have been effectively executed outcome with optimum performance. Investigations depict overall good performance of the design in terms of the extinction factor. It also inferred that all-optical realization based on SOA is competent scheme, as it circumvents costly optoelectronic translation. This could be well supportive to erect larger complex optical combinational circuits.

  5. Investigating Patterns of Automation and Growth Performance among Low Level Users of Manufacturing Automation

    DEFF Research Database (Denmark)

    Matthiesen, Rikke Vestergaard; Kromann, Lene

    instrument with a new, innovative way of characterizing and measuring automation levels in the production process. The survey data is merged with elaborate Danish register data on economic performance, market, and worker characteristics. The data is available from 2000 to 2010 across a broad range......-movers; companies that develop their level of automation further and companies that remain on the 2005 level up until 2010. We compare the presence of drivers and enablers in the 5-year period leading up to 2005 and investigate patterns in growth performance on a range of economic indicators between the two groups....... However, the cross sectional nature of most studies prohibits analysis of direction; is growth and economic performance the driver of manufacturing technology investment or vice versa. Longitudinal data is required to study this. The present study analyses panel data obtained using a retrospective survey...

  6. Investigating conversational dynamics: Interactive alignment, Interpersonal synergy, and collective task performance

    DEFF Research Database (Denmark)

    Fusaroli, Riccardo; Tylén, Kristian

    2016-01-01

    This study investigates interpersonal processes underlying dialog by comparing two approaches, interactive alignment and interpersonal synergy, and assesses how they predict collective performance in a joint task. While the interactive alignment approach highlights imitative patterns between...... and their impact on collective performance in a corpus of task-oriented conversations. The results show statistical presence of patterns relevant for both approaches. However, synergetic aspects of dialog provide the best statistical predictors of collective performance and adding aspects of the alignment approach...... does not improve the model. This suggests that structural organization at the level of the interaction plays a crucial role in task-oriented conversations, possibly constraining and integrating processes related to alignment....

  7. An Investigation of the Performance of the Colored Gauss-Seidel Solver on CPU and GPU

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Jong Seon; Choi, Hyoung Gwon [Seoul Nat’l Univ. of Science and Technology, Seoul (Korea, Republic of); Jeon, Byoung Jin [Yonsei Univ., Seoul (Korea, Republic of)

    2017-02-15

    The performance of the colored Gauss–Seidel solver on CPU and GPU was investigated for the two- and three-dimensional heat conduction problems by using different mesh sizes. The heat conduction equation was discretized by the finite difference method and finite element method. The CPU yielded good performance for small problems but deteriorated when the total memory required for computing was larger than the cache memory for large problems. In contrast, the GPU performed better as the mesh size increased because of the latency hiding technique. Further, GPU computation by the colored Gauss–Siedel solver was approximately 7 times that by the single CPU. Furthermore, the colored Gauss–Seidel solver was found to be approximately twice that of the Jacobi solver when parallel computing was conducted on the GPU.

  8. Investigation of the diffusion {proportional_to} brasses using methods depending on the evaporation or condensation of zinc; Etude de la diffusion dans les laitons {proportional_to} au moyen des methodes d'evaporation ou de condensation du zinc

    Energy Technology Data Exchange (ETDEWEB)

    Accary, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires; Centre d' Etudes de Chimie Metallurgique du CNRS (France)

    1959-07-01

    Diffusion in {alpha} brasses has been investigated using methods involving the evaporation and the condensation of zinc. Having shown that at sufficiently high temperatures intergranular diffusion has no effect, it was then proved that the rate of evaporation or of condensation can only be defined if the mechanical treatment of the test piece before diffusion, the direction of the diffusion and the nature of the impurities present are also defined. The coefficient of diffusion D is then given by the equation D ({pi}/4t){rho}{sup 2}{sub 0} where t is the duration of the diffusion; {rho}{sub 0} is the extrapolated value of {rho} = ({delta}m)/({delta}C) for a zero value of the variation of concentration ({delta}m in is the change in weight of the test piece per unit surface; {delta}C is the difference between the concentration at the surface and the initial concentration of the test piece). This method has been used to study the effect of the direction of the diffusion on the coefficient of diffusion. The coefficient for diffusion which decreases the concentration of zinc is 5 times greater than that for diffusion which increases the quantity of zinc in the metal; an interpretation of this phenomena based on the mechanism of diffusion vacancies in the structure has been proposed. By means of micrographic investigation and by weighing it has been shown that the presence of certain impurities, such as phosphorous, arsenic, antimony, silicon, and aluminium can result in a marked increase of the rate of diffusion: the effect of these impurities on the coefficient of diffusion has been related to their valency and atomic weight. (author) [French] La diffusion dans les laitons {alpha} a ete etudiee au moyen des methodes d'evaporation et de condensafion du zinc. Apres avoir montre qu'aux temperatures suffisamment elevees, la diffusion intergranulaire ne jouait aucun role, l'auteur a prouve que la vitesse d'evaporation ou de condensation n'est definie que dans la mesure ou

  9. The sectorial investigation power generation / electricity wholesaling of the Federal Cartel Office. Excellent analysis, insufficient consequences; Die Sektoruntersuchung Stromerzeugung/Stromgrosshandel des Bundeskartellamts. Ausgezeichnete Analyse, unzureichende Konsequenzen

    Energy Technology Data Exchange (ETDEWEB)

    Becker, Peter [Becker Buettner Held (Germany)

    2011-04-15

    The office faced a difficult task: Are the German prices for electric power at the Wholesale level abusively excessive from the point of view of antitrust law? If so, what are the consequences? The investigation follows on two methods, which ended without result for the electricity customers: the abuse proceedings by the Commission against E.ON (Munich, Federal Republic of Germany) and the abuse proceedings of the offices against RWE AG (Dortmund, Federal Republic of Germany), both of which have been adjusted. Therefore, the expectations to the office were high. The investigation fulfills the restricted formulation of a question. The investigation will not fulfill the statutory mandate. The question of the instruments and their relationship to one another often remains open.

  10. Santé des adolescents et des jeunes au Burkina Faso : état des ...

    African Journals Online (AJOL)

    Il s'est agi d'une étude évaluative ayant utilisé une revue documentaire associée à une interview des acteurs clés et un atelier de validation et d'identification des interventions pertinentes pour un plan stratégique national. La situation de la santé des adolescents et des jeunes est caractérisée par des grossesses précoces ...

  11. Investigations of elementary reactions of the methyl radical with the aid of laser magnetic resonance; Untersuchungen von Elementarreaktionen des Methylradikals mit Hilfe der Laser-Magnetischen-Resonanz

    Energy Technology Data Exchange (ETDEWEB)

    Deters, R.J.

    1998-01-01

    Selected elementary reactions of CH{sub 3} radicals in an isothermal flow system in the gaseous phase were investigated by means of LMR. [Deutsch] In dieser Arbeit wurden ausgewaehlte Elementarreaktionen von CH{sub 3}-Radikalen in einem isothermen Stroemungssystem in der Gasphase mit Hilfe der Laser-Magnetischen-Resonanz untersucht. (orig.)

  12. Neutron Investigation of Magnon Spectrum in Haematite; Etude du Spectre de Magnons dans l'Hematite, au Moyen des Neutrons; Nejtronnoe issledovanie spektra magnona v gematite; Estudio, por Metodos Neutronicos, del Espectro de Magnones en la Hematita

    Energy Technology Data Exchange (ETDEWEB)

    Dimitrijevic, Z.; Rzany, H.; Todorovic, J.; Wanic, A. [Institute for Nuclear Physics Cracow (Poland)

    1965-04-15

    Measurements were done in Vinca on the RA reactor using a crystal neutron spectrometer. Monochromatic neutrons ({lambda} = 1.314A) were scattered on a large single crystal of haematite ({alpha}-Fe{sub 2}O{sub 3}). The angular distributions of inelastically scattered neutrons were investigated. For a number of different crystal missetting angles {Delta}{theta}, the width {Gamma} of the scattered neutron beam (so-called scattering cone) was measured. This scattering cone was ascribed to the magnon scattering surface surrounding the (111) reciprocal lattice point. For several magnon velocities the {Gamma} versus missetting angle dependence was calculated and compared with the experimental points. The value of the velocity in the [111] direction was found to be equal to 25.5{+-} 1.0 km/s. Structural anisotropy of the magnon dispersion relation was discovered. The velocity was found to be higher for the directions of propagation parallel to the [111] axis in qualitative agreement with the earlier measurements (Riste and others) giving v = 38 km/s. It was not possible to reveal the existence of an energy gap Eg in the acoustic magnon energy band. It was estimated that the Eg value must be below 1 meV. Using the formalism of Wallace the magnon dispersion relations in haematite were calculated. This was done under the assumption that there exist two non-vanishing exchange integrals J{sub 1} and J{sub 2}. J{sub 1} and J{sub 2} denote the superexchange energy coupling between the spins of neighbouring iron ions bonded via an oxygen ion. The Fe-O-Fe angles of the bonds taken into consideration are correspondingly 132 and 126 Degree-Sign . Satisfactory agreement between the theory and existing experimental data is obtained when SJ{sub 1} = SJ{sub 2} = 5.1 meV. Apart from the acoustic magnon branch, the calculations revealed the existence of an optic branch but this was not accessible to investigation by the neutron diffraction technique. (author) [French] Les mesures ont ete

  13. Contribution des travailleurs dans l’élaboration des programmes d’entraînement à la manutention sécuritaire : identification des stratégies, évaluation biomécanique et implantation

    Directory of Open Access Journals (Sweden)

    Micheline Gagnon

    2005-05-01

    Full Text Available Les travailleurs experts et novices présentent des caractéristiques différentes, particulièrement pour les éléments de placements/déplacements des pieds et de manœuvres effectuées avec les boîtes. Un examen biomécanique de ces éléments et de certaines stratégies contrastant les experts et les novices a mis en évidence leur potentiel pour une manutention plus sécuritaire. On note la réduction des chargements articulaires, surtout au dos, la réduction des asymétries du dos et les exigences moins grandes en travail mécanique. L’efficacité de stratégies d’experts et de novices fut ensuite évaluée, suite à un programme d’entraînement, par deux études indépendantes effectuées chez des travailleurs novices. On a d’abord étudié les effets de la pratique libre pour conclure qu’elle ne mène pas spontanément à un apprentissage de stratégies optimales. On a ensuite évalué un entraînement orienté sur l’observation de certaines stratégies contrastées propres à des experts et à des novices (placement/déplacement des pieds, manœuvres de boîtes et posture du dos, combinée à une pratique libre mais orientée sur une recherche de solutions optimales ; on a conclu que les novices soumis à cet entraînement adoptaient rapidement de nouvelles façons de manœuvrer les boîtes et de se placer qui apparaissent plus sécuritaires pour le travail mécanique et les efforts au dos. Il est donc recommandé d’inclure ces éléments dans les programmes d’entraînement et d’élaborer des programmes sur la base des connaissances des travailleurs et l’observation de leurs performances plutôt que sur la seule théorie.Expert and novice workers present different characteristics, particularly for aspects such as foot positioning/displacement and box maneuvers. A biomechanical investigation of these aspects and of specific strategies contrasting experts and novices revealed their potential for safer ways of

  14. Numerical investigation on the performance of fin and tube heat exchangers using rectangular vortex generators

    Science.gov (United States)

    Zeeshan, Mohd; Hazarika, Saheera Azmi; Nath, Sujit; Bhanja, Dipankar

    2017-07-01

    In the present work, a 3-D numerical investigation has been performed to explore the effect of attack angles on the thermal-hydraulic performance of fin and tube heat exchanger (FTHE) using rectangular winglet pairs (RWPs). RWPs are placed adjacent to the tubes and three attack angels are considered for the study i.e. 5°, 15° and 25°. The effect of attack angles are examined on the heat transfer characteristics as well as in pressure drop penalty with airside Reynolds number Rea ranges from 500 to 900. Two performance evaluation criteria namely PEC1 i.e. area goodness factor (j/f) and PEC2 i.e. heat transfer rate per unit fan power consumption (Q/Pf) are considered for the performance evaluation. Furthermore, MOORA method is applied to obtain the performance order of FTHE configurations by taking PEC1 and PEC2 as beneficial attributes and fan power Pf as a non-beneficial attribute, keeping equal importance to each attribute. The results show that 5° attack angle provides the better performance in terms of PEC1 as heat transfer coefficient is increased by 27.70% at Rea=500 and 32.73% at Rea=900 respectively with 13.01% increased pressure drop penalty at Rea=500 and 14.26% at Rea=900 respectively. In terms of PEC2, though the 5° attack angle provides the high values of Q/Pf factor among the 15° and 25° attack angles, but it is found insignificant to replace the baseline configuration i.e. plain fin and tube heat exchanger configuration without vortex generators. Moreover, in MOORA optimization analysis also, it is found that 5° attack angle provides the better thermal-hydraulic performance.

  15. Dental Encounter System (DES)

    Data.gov (United States)

    Department of Veterans Affairs — Dental Encounter System (DES) is an automated health care application designed to capture critical data about the operations of VA Dental Services. Information on...

  16. Diethylstilbestrol (DES) and Cancer

    Science.gov (United States)

    ... DES-exposed grandchildren have? Researchers are also studying possible health effects among women and men who are the children ... for unexposed men. In addition, researchers are studying possible health effects on the grandchildren of mothers who were exposed ...

  17. Table des illustrations

    OpenAIRE

    2016-01-01

    Tableaux Dates d’inauguration des grands hôtels japonais entre 1860 et 1945… 19 Histoire, tourisme et hôtellerie en Corée depuis les années 1870… 59-60 Dates d’inauguration des grands hôtels chinois depuis 1863… 84 Les hôtels de luxe et leurs capacités d’hébergement en Corée en 2000… 103 Les flux de personnes suscités par les hôtels « super luxe » de Séoul en 2000… 105 L’activité des grands hôtels à Séoul en 1999 (en wons)… 106 Propriété et gestion des grands hôtels à Séoul en 1999…. 110 La c...

  18. Numerical Investigation of a Chip Printed Antenna Performances for Wireless Implantable Body Area Network Applications

    Science.gov (United States)

    Ramli, N. H.; Jaafar, H.; Lee, Y. S.

    2018-03-01

    Recently, wireless implantable body area network (WiBAN) system become an active area of research due to their various applications such as healthcare, support systems for specialized occupations and personal communications. Biomedical sensors networks mounted in the human body have drawn greater attention for health care monitoring systems. The implantable chip printed antenna for WiBAN applications is designed and the antenna performances is investigated in term of gain, efficiency, return loss, operating bandwidth and radiation pattern at different environments. This paper is presents the performances of implantable chip printed antenna in selected part of human body (hand, chest, leg, heart and skull). The numerical investigation is done by using human voxel model in built in the CST Microwave Studio Software. Results proved that the chip printed antenna is suitable to implant in the human hand model. The human hand model has less complex structure as it consists of skin, fat, muscle, blood and bone. Moreover, the antenna is implanted under the skin. Therefore the signal propagation path length to the base station at free space environment is considerably short. The antenna’s gain, efficiency and Specific Absorption Rate (SAR) are - 13.62dBi, 1.50 % and 0.12 W/kg respectively; which confirms the safety of the antenna usage. The results of the investigations can be used as guidance while designing chip implantable antenna in future.

  19. Contraceptive Use Affects Overall Olfactory Performance: Investigation of Estradiol Dosage and Duration of Intake.

    Directory of Open Access Journals (Sweden)

    Kathrin Kollndorfer

    Full Text Available The influence of female sex steroids on cognitive performance and sensory perception has been investigated for decades. However, previous research that studied olfaction revealed inconsistent results. The main aim of this study was to investigate the effects of different ethinyl estradiol (EE concentrations of oral contraceptives and duration of intake on olfactory function. Forty-two healthy women, with regular intake of either high or low EE dosage over at least one year and up to 15 years participated in this study. Results revealed a significant concordance between a priori categorization in the two groups with high and low EE dosage and data-driven hierarchical clustering (p = 0.008. Furthermore, significantly higher olfactory performance was observed in women using low-dose products compared to women using high-dosed products (p = 0.019. These findings indicate different effects of pill use with regard to EE concentration. We therefore strongly recommend the acquisition of information about EE dosage of oral contraceptives to reduce potential confounding factors when investigating sensory systems.

  20. Performance Investigation of O-Ring Vacuum Membrane Distillation Module for Water Desalination

    Directory of Open Access Journals (Sweden)

    Adnan Alhathal Alanezi

    2016-01-01

    Full Text Available A new O-ring flat sheet membrane module design was used to investigate the performance of Vacuum Membrane Distillation (VMD for water desalination using two commercial polytetrafluoroethylene (PTFE and polyvinylidene fluoride (PVDF flat sheet hydrophobic membranes. The design of the membrane module proved its applicability for achieving a high heat transfer coefficient of the order of 103 (W/m2 K and a high Reynolds number (Re. VMD experiments were conducted to measure the heat and mass transfer coefficients within the membrane module. The effects of the process parameters, such as the feed temperature, feed flow rate, vacuum degree, and feed concentration, on the permeate flux have been investigated. The feed temperature, feed flow rate, and vacuum degree play an important role in enhancing the performance of the VMD process; therefore, optimizing all of these parameters is the best way to achieve a high permeate flux. The PTFE membrane showed better performance than the PVDF membrane in VMD desalination. The obtained water flux is relatively high compared to that reported in the literature, reaching 43.8 and 52.6 (kg/m2 h for PVDF and PTFE, respectively. The salt rejection of NaCl was higher than 99% for both membranes.

  1. Investigation on dynamic performance of concrete column crumb rubber steel and fiber concrete

    Science.gov (United States)

    Siti Nurul Nureda, M. Z.; Mariyana, A. K.; Khiyon, M. Iqbal; Rahman, M. S. Abdul; Nurizaty, Z.

    2017-11-01

    In general the Normal Concrete (NC) are by quasi-brittle failure, where, the nearly complete loss of loading capacity, once failure is initiated especially under dynamic loadings. The significance of this study is to improve the damping properties of concrete structure by utilization of the recycled materials from waste tires to be used in concrete as structural materials that improve seismic performance. In this study, the concrete containing 10% of fine crumb rubber and 1 % volume fraction of steel fiber from waste tires is use to investigate the dynamic performance (natural frequency and damping ratio).A small scale column were fabricated from Treated Crumb Rubber and Steel Fiber Concrete (TCRSFC) and NC were cast and cured for 28 days to investigate the dynamic performance. Based on analysis, dynamic modulus, damping ratio and natural frequency of TCRSFC has improved considerably by 5.18%, 109% and 10.94% when compared with NC. The TCRSFC producing concrete with the desired properties as well as to introduce the huge potential as dynamic resistance structure from severe damage especially prevention on catastrophic failure.

  2. Numerical investigation of geometric parameter effects on the aerodynamic performance of a Bladeless fan

    Directory of Open Access Journals (Sweden)

    Mohammad Jafari

    2016-03-01

    Full Text Available Aerodynamic performance of a Bladeless fan is numerically investigated considering the effect of five geometric parameters. Airflow through this fan was analyzed by simulating a Bladeless fan within a 2 m × 2 m × 4 m room. Analysis of the flow field inside the fan and the evaluation of its performance were obtained by solving conservations of mass and momentum equations for the aerodynamic investigations. In order to design the Bladeless fan an Eppler 473 airfoil profile was used as the cross section of the fan. Five distinct parameters, namely height of cross section of the fan, outlet angle of the flow relative to the fan axis, thickness of airflow outlet slit, hydraulic diameter, and aspect ratio for circular and quadratic cross sections were considered. Validating 3-D numerical results, experimental results of a round jet showed good agreement with those of the simulation data. The multiplier factor M is defined to show the ratio of the outlet flow rate to inlet flow rate from the fan. The obtained numerical results showed that the Discharge ratio has the maximum value for the height of 3 cm. The numerical outcomes of outlet thickness variation indicate that this parameter is one of the most influential parameters on the aerodynamic performance of a Bladeless fan. The results for the outlet thicknesses of 1, 2 and 3 mm showed that the Discharge ratio increased significantly when the outlet thickness decreased.

  3. An Experimental Investigation of Ethanol-Diesel Blends on Performance and Exhaust Emissions of Diesel Engines

    Directory of Open Access Journals (Sweden)

    Tarkan Sandalcı

    2014-08-01

    Full Text Available Ethanol is a promising alternative fuel, due to its renewable biobased origin. Also, it has lower carbon content than diesel fuel and it is oxygenated. For this reason, ethanol is providing remarkable potential to reduce particulate emulsions in compression-ignition engines. In this study, performance of ethanol-diesel blends has been investigated experimentally. Tested fuels were mineral diesel fuel (E0D100, 15% (v/v ethanol/diesel fuel blend (E15D85, and 30% (v/v ethanol/diesel fuel blend (E30D70. Firstly, the solubility of ethanol and diesel was experienced. Engine tests were carried out to reveal the performance and emissions of the engine fuelled with the blends. Full load operating conditions at various engine speeds were investigated. Engine brake torque, brake power, brake specific fuel consumption, brake thermal efficiency, exhaust gas temperature, and finally exhaust emissions were measured. Performance of the tested engine decreased substantially while improvement on smoke and gaseous emissions makes ethanol blend favorable.

  4. Performance Investigation of Air Velocity Effects on PV Modules under Controlled Conditions

    Directory of Open Access Journals (Sweden)

    Muzaffar Ali

    2017-01-01

    Full Text Available Junction temperature of PV modules is one of the key parameters on which the performance of PV modules depends. In the present work, an experimental investigation was carried out to analyze the effects of air velocity on the performance of two PV modules, that is, monocrystalline silicon and polycrystalline silicon under the controlled conditions of a wind tunnel in the presence of an artificial solar simulator. The parameters investigated include the surface temperature variation, power output, and efficiency of PV modules under varying air velocity from near zero (indoor lab. conditions to 15 m/s. Additionally, the results were also determined at two different module angular positions: at 0° angle, that is, parallel to air direction and at 10° angle with the direction of coming air to consider the effects of tilt angles. Afterwards, the thermal analysis of the modules was performed using Ansys-Fluent in which junction temperature and heat flux of modules were determined by applying appropriate boundary conditions, such as air velocity, heat flux, and solar radiation. Finally, the numerical results are compared with the experiment in terms of junction temperatures of modules and good agreement was found. Additionally, the results showed that the maximum module temperature drops by 17.2°C and the module efficiency and power output increased from 10 to 12% with increasing air velocity.

  5. Performance investigation on a 4-bed adsorption desalination cycle with internal heat recovery scheme

    KAUST Repository

    Thu, Kyaw

    2016-10-08

    Multi-bed adsorption cycle with the internal heat recovery between the condenser and the evaporator is investigated for desalination application. A numerical model is developed for a 4-bed adsorption cycle implemented with the master-and-slave configuration and the aforementioned internal heat recovery scheme. The present model captures the reversed adsorption/desorption phenomena frequently associated with the unmatched switching periods. Mesoporous silica gel and water vapor emanated from the evaporation of the seawater are employed as the adsorbent and adsorbate pair. The experimental data and investigation for such configurations are reported for the first time at heat source temperatures from 50 °C to 70 °C. The numerical model is validated rigorously and the parametric study is conducted for the performance of the cycle at assorted operation conditions such as hot and cooling water inlet temperatures and the cycle times. The specific daily water production (SDWP) of the present cycle is found to be about 10 m/day per tonne of silica gel for the heat source temperature at 70 °C. Performance comparison is conducted for various types of adsorption desalination cycles. It is observed that the AD cycle with the current configuration provides superior performance whilst is operational at unprecedentedly low heat source temperature as low as 50 °C.

  6. Performance investigation of a cogeneration plant with the efficient and compact heat recovery system

    KAUST Repository

    Myat, Aung

    2011-10-03

    This paper presents the performance investigation of a cogeneration plant equipped with an efficient waste heat recovery system. The proposed cogeneration system produces four types of useful energy namely: (i) electricity, (ii) steam, (iii) cooling and (iv) dehumidification. The proposed plant comprises a Capstone C30 micro-turbine which generates 24 kW of electricity, a compact and efficient waste heat recovery system and a host of waste heat activated devices namely (i) a steam generator, (ii) an absorption chiller, (iii) an adsorption chiller and (iv) a multi-bed desiccant dehumidifier. The numerical analysis for the host of waste heat recovery system and thermally activated devices using FORTRAN power station linked to powerful IMSL library is performed to investigate the performance of the overall system. A set of experiments, both part load and full load, of micro-turbine is conducted to examine the electricity generation and the exhaust gas temperature. It is observed that energy utilization factor (EUF) could achieve as high as 70% while Fuel Energy Saving Ratio (FESR) is found to be 28%.

  7. Investigating the Effects of Concurrent Performance of Physical and Cognitive Demanding Task in Paced Assembly Lines

    Directory of Open Access Journals (Sweden)

    Shakil Ahmed Shaikh

    2013-07-01

    Full Text Available The study was undertaken to investigate the effects of pacing on aspects of performance at an assembly task and on the operators' responses related to work behaviour, perceived workload and perceived stress. A particular objective of the study was to investigate whether physical and cognitive demands may interact in their influences on these effects. An assembly task was simulated in the laboratory and the level of pacing imposed, work height and memory load within the task were all varied. The results showed that the type of pacing commonly imposed (as is common with a lean manufacturing Takt time system in industry can significantly affect both performance and perceived workload and stress. Physical demands (through work height affecting posture and mental demand (through memory load were also found to have significant effects, as would be expected from the many studies of these in the literature. More importantly, some interactions were found between pacing and work height in their effects on quality of assembly and the operator's own rating of performance, and between work height and memory load in their effects on errors. These findings will need to be taken into account by companies when implementing Takt time systems.

  8. Incorporation des sables concassés à différents taux de fillers dans la composition des bétons à très hautes performances : Comportement mécanique et Durabilité

    Directory of Open Access Journals (Sweden)

    D. Chiheb

    2016-12-01

    Full Text Available Chiheb, D., Belaoura, M., Oudjit, M.N. and Bali, A. 2016. Incorporation of crushed sand at different rates of fillers in the composition of concretes with very high performances: mechanical behavior and durability. Lebanese Science Journal, 17 (2: 146-165. This study focuses on the characterization of concretes Very High Performance comparing crushed sand to high levels of fine limestone available in large quantities in Algeria as an alternative resource to rolled sand. The parameters studied were the sand substitution rate to roll crushed sands, and the dosage of silica fume, cement and superplasticizer. Several tests were performed such as mechanical strength, shrinkage and a sustainability study to identify the mechanisms that govern the behavior of these new concretes. The results showed that the crushed sand is a very promising material; it opens up great horizons to optimize VHPC in Algeria, since it provides good compactness, better mechanical performance, very good different behavior and excellent sustainability indicators when combined with rolled sand.

  9. La revolution des savants

    CERN Document Server

    Chavanne, A

    1989-01-01

    Premiere cassette : - 1666 : impact de la creation de l'Academie des Sciences par Colbert, trente ans apres le proces de Galile, et au moment des disparitions de Pascal, Descartes et Fermat. Elle dirigee par le hollandais Huyggens jusqu'a sa fuite de France au moment de la revocation de l'Edit de Nantes. - 1750 : l'Encyclopedie (ou "Dictionnaire raisonne des Sciences, des Arts et des Metiers") de Diderot et d'Alembert, soutenus par Malherbes, Buffon, Condorcet et Rousseau. - 1789 : Revolution francaise. - 8 aout 1793 : l'Assemblee, par une declaration de Marat, dissout l'Academie des Sciences. Celle-ci continue cependant ses travaux pour les poids et mesures jusqu'en 1795. - la Terreur : la condamnation a mort, pas au nom d'une "Revolution qui n'a pas besoin de savants" mais pour d'autres raisons, de trois grands hommes de science : Lavoisier, Bailly et Condorcet. - 1793-1794 : Au printemps 93, le Comite de Salut Publique s'inquiete du demi-million de soldats etrangers de toutes les pays frontaliers qui essai...

  10. The X-Files Investigating Alien Performance in a Thin-client World

    CERN Document Server

    Gunther, N J

    2000-01-01

    Many scientific applications use the X11 window environment; an open source windows GUI standard employing a client/server architecture. X11 promotes: distributed computing, thin-client functionality, cheap desktop displays, compatibility with heterogeneous servers, remote services and administration, and greater maturity than newer web technologies. This paper details the author's investigations into close encounters with alien performance in X11-based seismic applications running on a 200-node cluster, backed by 2 TB of mass storage. End-users cited two significant UFOs (Unidentified Faulty Operations) i) long application launch times and ii) poor interactive response times. The paper is divided into three major sections describing Close Encounters of the 1st Kind: citings of UFO experiences, the 2nd Kind: recording evidence of a UFO, and the 3rd Kind: contact and analysis. UFOs do exist and this investigation presents a real case study for evaluating workload analysis and other diagnostic tools.

  11. An investigation on the effects of supply chain management on improvement of firms’ financial performance

    Directory of Open Access Journals (Sweden)

    Mohammad Mokhtari

    2014-04-01

    Full Text Available Supply chain management plays essential role on improvement of the efficiency of production systems. It helps firms meet their expectations, deliver their products on time and build a good brand. This paper performs an empirical investigation to study the effect of good relationships among various suppliers on financial figures in an Iranian automaker. The proposed study investigates the effects of seven variables including communication, cooperation, commitment, compatibility, organization climate, dependency and trust on two financial figures including return on assets and return on equities. Using structural equation modeling, the study detects that communication, dependency and trust influence positively on return on assets. In addition, communication, cooperation, trust and commitment have positive impact on return on equities.

  12. An experimental investigation of the low Reynolds number performance of the Lissaman 7769 airfoil

    Science.gov (United States)

    Conigliaro, P. E.

    1983-01-01

    A Lissaman 7769 airfoil, used on the Gossamer Condor and Gossamer Albatross human-powered aircraft, was tested in a low turbulence subsonic wind tunnel. Lift and drag data were collected at chord Reynolds numbers of 100,000, 150,000, 200,000, 250,000, and 300,000; at angles of attack from -10 to +20 deg by using an external strain gage force balance. Lift curves, drag curves, and drag polars were generated from both uncorrected data and data corrected for wind tunnel blockage effects. A flow visualization study was performed to correlate with the force data. The results of the investigation have shown that the airfoil exhibits a significant degradation in performance for chord Reynolds numbers below 150,000.

  13. An investigation into the mathematics performance of Grade 6 learners in South Africa

    Directory of Open Access Journals (Sweden)

    Gary S. Kotzé

    2007-10-01

    Full Text Available The aim of this article is to investigate mathematics performance of intermediate phase learners. The quality of learners’ scholastic achievement in mathematics are analysed based on the empirical evidence obtained from an international survey. The method of inquiry is based on an analysis of existing statistic-al data concerning present-oriented problems. The effects of particular variables on mathematics learn-ing are explored, such as male and female learners and those from less advantaged social backgrounds. Overall performance and competence levels are analysed. Although there are no outstanding contributing factors that influence mathematics achievement of  grade 6 learners in South Africa conclusions are drawn that may influence school system organisation and also the quality of mathematics teaching.

  14. Numerical Investigation of the Thermal Management Performance of MEPCM Modules for PV Applications

    Directory of Open Access Journals (Sweden)

    Chao-Yang Huang

    2013-08-01

    Full Text Available The efficiency of photovoltaic modules decreases as the cell temperature increases. It is necessary to have an adequate thermal management mechanism for a photovoltaic module, especially when combined with a building construction system. This study aims to investigate via computational fluid dynamics simulations the heat transfer characteristics and thermal management performance of microencapsulated phase change material modules for photovoltaic applications under temporal variations of daily solar irradiation. The results show that the aspect ratio of the microencapsulated phase change material layer has significant effects on the heat transfer characteristics and the overall thermal performance of the two cases examined with different melting points (26 °C and 34 °C are approximately the same.

  15. Investigation on Superior Performance by Fractional Controller for Cart-Servo Laboratory Set-Up

    Directory of Open Access Journals (Sweden)

    Ameya Anil Kesarkar

    2014-01-01

    Full Text Available In this paper, an investigation is made on the superiority of fractional PID controller (PI^alpha D^beta over conventional PID for the cart-servo laboratory set-up. The designed controllers are optimum in the sense of Integral Absolute Error (IAE and Integral Square Error (ISE. The paper contributes in three aspects: 1 Acquiring nonlinear mathematical model for the cart-servo laboratory set-up, 2 Designing fractional and integer order PID for minimizing IAE, ISE, 3 Analyzing the performance of designed controllers for simulated plant model as well as real plant. The results show a significantly superior performance by PI^alpha D^beta as compared to the conventional PID controller.

  16. Theoretical investigation of performance of armchair graphene nanoribbon field effect transistors

    Science.gov (United States)

    Hur, Ji-Hyun; Kim, Deok-Kee

    2018-05-01

    In this paper, we theoretically investigate the highest possible expected performance for graphene nanoribbon field effect transistors (GNRFETs) for a wide range of operation voltages and device structure parameters, such as the width of the graphene nanoribbon and gate length. We formulated a self-consistent, non-equilibrium Green’s function method in conjunction with the Poisson equation and modeled the operation of nanometer sized GNRFETs, of which GNR channels have finite bandgaps so that the GNRFET can operate as a switch. We propose a metric for competing with the current silicon CMOS high performance or low power devices and explain that this can vary greatly depending on the GNRFET structure parameters.

  17. Board diversity and firm performance: an empirical investigation in the Brazilian market

    Directory of Open Access Journals (Sweden)

    João Batista Fraga

    2012-01-01

    Full Text Available This article investigates the diversity of the boards of directors of Brazilian companies listed on the BM&FBovespa with respect to gender, age, educational attainment and independence, to ascertain whether there is a relationship between any of these diversity measures and firm performance. The study covers all companies without majority control, a type of corporate structure that first appeared in Brazil in 2005. The results indicate that greater diversity in the educational disciplines and the presence or absence of independent board members negatively affect performance, while diversity in years of schooling has a positive effect. The presence of women board members is small, but firms that have at least one female director outperform those that do not.

  18. Numerical investigation of flow field configuration and contact resistance for PEM fuel cell performance

    Energy Technology Data Exchange (ETDEWEB)

    Akbari, Mohammad Hadi; Rismanchi, Behzad [Department of Mechanical Engineering, Shiraz University, Shiraz 71348-51154 (Iran)

    2008-08-15

    A steady-state three-dimensional non-isothermal computational fluid dynamics (CFD) model of a proton exchange membrane fuel cell is presented. Conservation of mass, momentum, species, energy, and charge, as well as electrochemical kinetics are considered. In this model, the effect of interfacial contact resistance is also included. The numerical solution is based on a finite-volume method. In this study the effects of flow channel dimensions on the cell performance are investigated. Simulation results indicate that increasing the channel width will improve the limiting current density. However, it is observed that an optimum shoulder size of the flow channels exists for which the cell performance is the highest. Polarization curves are obtained for different operating conditions which, in general, compare favorably with the corresponding experimental data. Such a CFD model can be used as a tool in the development and optimization of PEM fuel cells. (author)

  19. Investigation of Fuel Chemistry and Bed Performance in a Fluidized Bed Black Liquor Steam Reformer

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Whitty

    2007-06-30

    University of Utah's project entitled 'Investigation of Fuel Chemistry and Bed Performance in a Fluidized Bed Black Liquor Steam Reformer' (DOE Cooperative Agreement DE-FC26-02NT41490) was developed in response to a solicitation released by the U.S. Department of Energy in December 2001, requesting proposals for projects targeted towards black liquor/biomass gasification technology support research and development. Specifically, the solicitation was seeking projects that would provide technical support for Department of Energy supported black liquor and biomass gasification demonstration projects under development at the time.

  20. An Investigation into how Character’s Visual Appearance Affects Gamer Performance

    OpenAIRE

    Leppänen, Janne

    2017-01-01

    The purpose of this thesis was to investigate how a gamer perceives the playable character’s visual looks in an FPS (first person shooter) type of computer game. The main focus was on how this affects immersion and especially the gamer performance while playing the game. The goal was also to explain the concept of enclothed cognition and its use in the thesis to support the research. A series of tests was set up for multiple test subjects with the purpose of proving that the playable...

  1. Consumers' influence on the thermal performance of small SDHW systems - theroetical investigation

    DEFF Research Database (Denmark)

    Knudsen, Søren

    2002-01-01

    Usually when SDHW systems are tested and modeled the daily hot-water consumption and consumption pattern are canstant during all days of the test period and simulation period. This is not realistic in 'real life'. Numerical simulations with detailed simulation models have been carried out...... to investigate the influence on the thermal performance of different hot-water consumption and consumotion pattern. Two different small SDHW systems are taken into the calculation, a low-flow system where the heat storage consists of a mantle tank and a high flow system with an internal heat exchanger spiral...

  2. A room acoustic investigation of an actor’s position and orientation for drama performances

    DEFF Research Database (Denmark)

    Gil-Reyes, Berti; Jeong, Cheol-Ho; Brunskog, Jonas

    2009-01-01

    in a free-field concludes that the sound pressure levels in the range of the azimuth angle [-50º, 50º] with respect to the performer’s frontal direction are equally loud. This holds irrespective of frequency and the elevation angle. Although this optimum speech aperture angle (OSAA) is based on the free......This study is concerned with optimum positions and orientations of theatre performers when acting off stage. Five audience settings of a drama theatre; a proscenium, an arena and three extended stages have been numerically investigated after a calibration. An analysis of a human voice pattern...

  3. Investigating the expected long-term production performance of shale reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Vassilellis, G.D.; Li, C.; Seager, R.J.H. [Gaffney, Cline and Associates, Houston, TX (United States); Moos, D. [Geomechanics International, Houston, TX (United States)

    2010-07-01

    Although there is global interest in developing shale plays, the traditional volumetric and material balance approaches that are used for petroleum asset evaluation do not address the special attributes of such formations. The performance of a particular deposit is currently determined by analyzing historical records statistically in developed areas and applying the derived type curves in new areas by assuming performance similarity. The assumption of similarity is challenged by the wealth of parameters influencing performance, which tend to differ, introducing considerable uncertainties into predictions. Historical records support only the early production history, while late performance is extrapolated without many reference points to match. This paper presented an investigation of the applicability of traditional and non-traditional empirical, analytical and numerical methods that are used to predict shale well performance. The purpose of the study was to rationalize the link between natural/stimulated rock description with oil and gas recovery mechanisms in a manner that is practical at different scales of resolution and covers early and late times. The paper discussed the use of special features such as flow through fracture networks, gas desorption and geomechanical effects that are incorporated in numerical simulation in a way that relates to the measurable petrophysical and geophysical input. The paper described the shale engineering concept and provided a description of the model. The Eagle Ford shale was presented as a case study. It was concluded that a reservoir simulation model with pseudo-lateral connections could describe the flow behaviour of a typical shale well, and could match shale gas well performance even if limited information was available. 20 refs., 9 figs.

  4. Investigation into the Effects of Textural Properties on Cuttability Performance of a Chisel Tool

    Science.gov (United States)

    Tumac, Deniz; Copur, Hanifi; Balci, Cemal; Er, Selman; Avunduk, Emre

    2018-04-01

    The main objective of this study is to investigate the effect of textural properties of stones on cutting performance of a standard chisel tool. Therewithal, the relationships between textural properties and cutting performance parameters and physical and mechanical properties were statistically analyzed. For this purpose, physical and mechanical property tests and mineralogical and petrographic analyses were carried out on eighteen natural stone samples, which can be grouped into three fundamentally different geological origins, i.e., metamorphic, igneous, and sedimentary. Then, texture coefficient analyses were performed on the samples. To determine the cuttability of the stones; the samples were cut with a portable linear cutting machine using a standard chisel tool at different depths of cut in unrelieved (non-interactive) cutting mode. The average and maximum forces (normal and cutting) and specific energy were measured, and the obtained values were correlated with texture coefficient, packing weighting, and grain size. With reference to the relation between depth of cut and cutting performance of the chisel tool for three types of natural stone groups, specific energy decreases with increasing depth of cut, and cutting forces increase in proportion to the depth of cut. The same is observed for the relationship between packing weighting and both of specific energy and cutter forces. On the other hand, specific energy and the forces decrease while grain size increases. Based on the findings of the present study, texture coefficient has strong correlation with specific energy. Generally, the lower depth of cut values in cutting tests shows higher and more reliable correlations with texture coefficient than the increased depth of cut. The results of cutting tests show also that, at a lower depth of cut (less than 1.5 mm), even stronger correlations can be observed between texture coefficient and cutting performance. Experimental studies indicate that cutting

  5. Investigating the performance of neural network backpropagation algorithms for TEC estimations using South African GPS data

    Science.gov (United States)

    Habarulema, J. B.; McKinnell, L.-A.

    2012-05-01

    In this work, results obtained by investigating the application of different neural network backpropagation training algorithms are presented. This was done to assess the performance accuracy of each training algorithm in total electron content (TEC) estimations using identical datasets in models development and verification processes. Investigated training algorithms are standard backpropagation (SBP), backpropagation with weight delay (BPWD), backpropagation with momentum (BPM) term, backpropagation with chunkwise weight update (BPC) and backpropagation for batch (BPB) training. These five algorithms are inbuilt functions within the Stuttgart Neural Network Simulator (SNNS) and the main objective was to find out the training algorithm that generates the minimum error between the TEC derived from Global Positioning System (GPS) observations and the modelled TEC data. Another investigated algorithm is the MatLab based Levenberg-Marquardt backpropagation (L-MBP), which achieves convergence after the least number of iterations during training. In this paper, neural network (NN) models were developed using hourly TEC data (for 8 years: 2000-2007) derived from GPS observations over a receiver station located at Sutherland (SUTH) (32.38° S, 20.81° E), South Africa. Verification of the NN models for all algorithms considered was performed on both "seen" and "unseen" data. Hourly TEC values over SUTH for 2003 formed the "seen" dataset. The "unseen" dataset consisted of hourly TEC data for 2002 and 2008 over Cape Town (CPTN) (33.95° S, 18.47° E) and SUTH, respectively. The models' verification showed that all algorithms investigated provide comparable results statistically, but differ significantly in terms of time required to achieve convergence during input-output data training/learning. This paper therefore provides a guide to neural network users for choosing appropriate algorithms based on the availability of computation capabilities used for research.

  6. Investigation of adsorption performance deterioration in silica gel–water adsorption refrigeration

    International Nuclear Information System (INIS)

    Wang Dechang; Zhang Jipeng; Xia Yanzhi; Han Yanpei; Wang Shuwei

    2012-01-01

    Highlights: ► Adsorption deterioration of silica gel in refrigeration systems is verified. ► Possible factors to cause such deterioration are analyzed. ► Specific surface area, silanol content and adsorption capacity are tested. ► The pollution is the primary factor to decline the adsorption capacity. ► Deteriorated samples are partly restored after being processed by acid solution. - Abstract: Silica gel acts as a key role in adsorption refrigeration systems. The adsorption deterioration must greatly impact the performance of the silica gel–water adsorption refrigeration system. In order to investigate the adsorption deterioration of silica gel, many different silica gel samples were prepared according to the application surroundings of silica gel in adsorption refrigeration systems after the likely factors to cause such deterioration were analyzed. The specific surface area, silanol content, adsorption capacity and pore size distribution of those samples were tested and the corresponding adsorption isotherms were achieved. In terms of the experimental data comparisons, it could be found that there are many factors to affect the adsorption performance of silica gel, but the pollution was the primary one to decline the adsorption capacity. In addition, the adsorption performance of the deteriorated samples after being processed by acid solution was explored in order to find the possible methods to restore its adsorption performance.

  7. An investigation of noise performance in optical lock-in thermography

    Science.gov (United States)

    Rajic, Nik; Antolis, Cedric

    2017-12-01

    An investigation into the noise performance of optical lock-in thermography (OLT) is described. The study aims to clarify the influence of infrared detector type and key inspection parameters such as illumination strength and lock-in duration on the quality of OLT amplitude and phase imagery. The study compares the performance of a state-of-the-art cooled photon detector with several lower-cost microbolometers. The results reveal a significant noise performance advantage to the photon detector. Under certain inspection regimes the advantage with respect to phase image quality is disproportionately high relative to detector sensitivities. This is shown to result from an explicit dependence in the phase signal variance on the ratio between the signal amplitude and the detector sensitivity. While this finding supports the preferred use of photon detectors for OLT inspections, it does not exclude microbolometers from a useful role. In cases where the significantly lower capital cost and improved practicality of microbolometers provide an advantage it is shown that performance shortfalls can be overcome with a relatively small factorial increase in optical illumination intensity.

  8. Experimental investigation on the performance of an impinging jet solar air heater

    Directory of Open Access Journals (Sweden)

    T. Rajaseenivasan

    2017-03-01

    Full Text Available Investigation on an impinging jet solar air heater is performed and reported in this work. The air is supplied through an impinging jet pipe which contains the nozzles to distribute the air in the solar air heater. The air is released from the jet strikes the absorber plate which increases the heat transfer rate by creating turbulent flow in the collector. This study is focused on the parameters that affect the heat transfer characteristics and compared with conventional solar air heater. The system is examined by varying the angle of attack (0°, 10°, 20°, 30°, 60° and 90° and the nozzle diameter (3 mm, 5 mm and 7 mm in the air mass flow rate range of 0.012–0.016 kg/s. The study revealed that the highest performance is achieved with the 30° angle of attack, and the lowest performance is recorded with the 0°. The reduction in jet diameter increases the pressure loss in the collector. The better system performance is observed with the 5 mm diameter hole. The maximum thermal enhancement factor of 2.19 and efficiency of 55.8% are reached with the flow rate of 0.016 kg/s.

  9. A preliminary investigation on the effects of characteristics and contractual behaviour on civil engineering project performance

    Science.gov (United States)

    Ismail, W. N. W.; Adnan, H.; Yusuwan, N.; Maisham, M.; Hassan, A. A.

    2018-02-01

    The significant role of civil engineering project is not only to make the lives of people easier and secure but also to trigger the economic growth by providing infrastructure facilities as well as job opportunities. As it is dominantly initiated by government sectors, performance of the civil engineering projects is always observed. This study aims to investigate the characteristics of civil engineering project and the contractual behavior of the key participants and how do these two factors affect civil engineering projects performance. Literature reviews, content analysis and questionnaires survey were conducted to undertake the research. A total of 50 questionnaires were distributed and 10 questionnaires were returned, resulting in a 20% response rate. The research unveiled that performance of civil engineering projects are influenced greatly by the ability to handle the unpredictable character of the civil engineering projects and adequate behavioral management. Apart from that, balancing the factors with high quality of workmanship, avoidance or well managed conflicts and high satisfaction level will ensure performance in projects.

  10. A Primary Investigation into Performance Measurement Systems in the Maltese Further Education (FE Sector

    Directory of Open Access Journals (Sweden)

    N. Zarb

    2014-12-01

    Full Text Available This work investigates the presence of a performance measurement system in the small island state of Malta using data gathered in 2012. In this way the type of system and KPIs currently in use are delineated. An interpretative methodology was employed to gain a deeper understanding of performance measurement in FE organizations. Data were collected from seven FE vocational and academic organizations via interviews with top senior management team (SMT officials and other internal and external stakehold-ers. Very few organizations have performance measurement systems. The use of KPIs is very narrow, usually focusing on pass rates. There is no external QA or performance measurement regime making it very difficult to compare different FE organizations. By utilizing qualitative data it is possible to un-cover particular nuances in specific sectors in small states. Reliability is further enhanced since the number of organizations in any sector in a small state in usually low. This translates into a higher percentage of organizations in the study.

  11. Experimental investigation on performance and exhaust emissions of castor oil biodiesel from a diesel engine.

    Science.gov (United States)

    Shojaeefard, M H; Etgahni, M M; Meisami, F; Barari, A

    2013-01-01

    Biodiesel, produced from plant and animal oils, is an important alternative to fossil fuels because, apart from dwindling supply, the latter are a major source of air pollution. In this investigation, effects of castor oil biodiesel blends have been examined on diesel engine performance and emissions. After producing castor methyl ester by the transesterification method and measuring its characteristics, the experiments were performed on a four cylinder, turbocharged, direct injection, diesel engine. Engine performance (power, torque, brake specific fuel consumption and thermal efficiency) and exhaust emissions were analysed at various engine speeds. All the tests were done under 75% full load. Furthermore, the volumetric blending ratios of biodiesel with conventional diesel fuel were set at 5, 10, 15, 20 and 30%. The results indicate that lower blends of biodiesel provide acceptable engine performance and even improve it. Meanwhile, exhaust emissions are much decreased. Finally, a 15% blend of castor oil-biodiesel was picked as the optimized blend of biodiesel-diesel. It was found that lower blends of castor biodiesel are an acceptable fuel alternative for the engine.

  12. Numerical investigation on thermal-hydraulic performance of new printed circuit heat exchanger model

    International Nuclear Information System (INIS)

    Kim, Dong Eok; Kim, Moo Hwan; Cha, Jae Eun; Kim, Seong O.

    2008-01-01

    Three-dimensional numerical analysis was performed to investigate heat transfer and pressure drop characteristics of supercritical CO 2 flow in new Printed Circuit Heat Exchanger (PCHE) model using commercial CFD code, Fluent 6.3. First, numerical analysis for conventional zigzag channel PCHE model was performed and compared with previous experimental data. Maximum deviation of in-outlet temperature difference and pressure drop from experimental data is about 10%. A new PCHE model has been designed to optimize thermal-hydraulic performance of PCHE. The new PCHE model has several airfoil shape fins (NACA 0020 model), which are designed to streamlined shape. Simulation results showed that in the airfoil shape fin PCHE, total heat transfer rate per unit volume was almost same with zigzag channel PCHE and the pressure drop was reduced to one-twentieth of that in zigzag channel PCHE. In airfoil shape fin PCHE model, the enhancement of heat transfer area and the uniform flow configuration contributed to obtain the same heat transfer performance with zigzag channel PCHE model. And the reduction of pressure drop in airfoil shape fin PCHE model was caused by suppressing generation of separated flow owing to streamlined shape of airfoil fins

  13. Détermination des performances aéro-thermo-propulsives des avions civils par une analyse exergétique de solutions haute-fidélité CFD-RANS

    OpenAIRE

    Arntz , A.

    2014-01-01

    A new exergy-based formulation is derived for the assessment of the aerothermopropulsive performance of civil aircraft. The choice of exergy is motivated by its ability to provide a well-established and consistent framework for the design of aerospace vehicles. The output of the derivation process is an exergy balance between the exergy supplied by a propulsion system or by heat transfer, the mechanical equilibrium of the aircraft, and the exergy outflow and destruction within the control vol...

  14. Methodology and optimization in the design and analysis of the efficiency of incompressible fluid turbomachines; Methodologie et optimisation dans la conception et l'analyse des performances des turbomachines a fluide incompressible

    Energy Technology Data Exchange (ETDEWEB)

    Asuaje, M.

    2003-07-15

    Faced with the problem of design in the pump industry, the main difficulty of manufacturers is to have fast, reliable and accurate methods. This research work involving, both theory and experiments deals, with this topic. We have developed a complete procedure for design, performance analysis and optimization of centrifugal and mixed incompressible flow turbomachinery. First of all, the definition of the pump geometry as well as the analysis of its global performance are carried out starting from the mean streamline method (1D), based on both ideal models and experimental correlations. A second stage of optimization is achieved from a quasi 3D method, by studying the meridional flow and blade to blade flow, using REMIX software developed by LEMFI. Finally, a three-dimensional flow study is performed by CFD tools from AEA-Technology group (CFX). The three-dimensional study provides the means to complete and validate the established procedure. To illustrate this procedure, a centrifugal machine with a volute was studied used. First, the analysis of the existing impeller was carried out to develop the various steps of the procedure. Then, the whole impeller-volute pump, was studied and compared with the previous trial runs. Special attention was paid to unsteady effects, resulting from impeller volute interaction. The results obtained are satisfactory. Finally, the integral method was applied to optimize a mixed flow pump equipped with a de-swirl. As it is a badly dimensioned pump, it is a good example of what this method can do. (author)

  15. Investigation of inactivation of Clostridium botulinum toxin by nuclear radiation. Final report. Untersuchung zur Desaktivierung des Clostridium botulinum Toxins durch Kernstrahlung. Endbericht

    Energy Technology Data Exchange (ETDEWEB)

    Kaltenhaeuser, A.; Werner, K.H.

    1989-01-01

    The effect of nuclear radiation on the toxicity and the molecular structure of the toxin produced by the microorganism Clostridium botulinum type A was investigated. The radiation induced changes in the structure of the toxin molecule. This effect is influenced by the composition or the medium above the toxin solution as well as by the temperature during the irradiation. The results of the investigation indicate that with increasing irradiation dose a new molecule was formed with immunological properties similar to the properties of the original molecule however with a greater molecular weight. After exposure to a radiation dose of 3,4 Mrad at normal temperature in air, complete detoxification of the substance was found. Immunizing experiments with the toxoid with two guinea-pigs indicated a pronounced increase of the antibody titer in the serum after 4 weeks. Vaccination experiments with the toxoid on animals show, that the protection against the effect of the toxin corresponds to the demands of the European Pharmacopoeia. The efficiency of the toxoid shows a similar efficiency as toxoids produced by chemical methods. The production of a toxoid-viccine with the relatively simple method of nuclear radiation appears possible. (orig./MG) With 12 refs., 3 tabs., 11 figs.

  16. Processing radioactive effluents with ion-exchanging resins: study of result extrapolation; Traitement des effluents radioactifs par resines echangeuses d'ions: etude de l'extrapolation des resultats

    Energy Technology Data Exchange (ETDEWEB)

    Wormser, G.

    1960-05-03

    As a previous study showed the ion-exchanging resins could be used in Saclay for the treatment of radioactive effluents, the author reports a study which aimed at investigating to which extent thus obtained results could be extrapolated to the case of higher industrial columns. The author reports experiments which aimed at determining extrapolation modes which could be used for columns of organic resin used for radioactive effluent decontamination. He notably studied whether the Hiester and Vermeulen extrapolation law could be applied. Experiments are performed at constant percolation flow rate, at varying flow rate, and at constant flow rate [French] Plusieurs etudes ont ete faites dans le but d'examiner les possibilites d'emploi des resines echangeuses d'ions pour le traitement des effluents radioactifs. Dans un rapport preliminaire, nous avons montre dans quelles limites un tel procede pouvait etre utilise au Centre d'Etudes Nucleaires de Saclay. Les essais ont ete effectues sur des petites colonnes de resine au laboratoire; il est apparu ensuite necessaire de prevoir dans quelle mesure les resultats ainsi obtenus peuvent etre extrapoles a des colonnes industrielles, de plus grande hauteur. Les experiences dont les resultats sont exposes dans ce rapport, ont pour but de determiner les modes d'extrapolation qui pourraient etre employes pour des colonnes de resine organique utilisees pour la decontamination d'effluents radioactifs. Nous avons en particulier recherche si la loi d'extrapolation de Hiester et Vermeulen qui donne de bons resultats dans le cas de fixation d'ions radioactifs en presence d'un ion macrocomposant sur des terres, pouvait etre appliquee. Les experiences, en nombre limite, ont montre que la loi d'extrapolation de Hiester et Vermeulen pouvait s'appliquer dans le cas de l'effluent considere quand les debits de percolation sont tres faibles; quand ils sont plus forts, les volumes de liquide percoles, a fixation egale, sont proportionnels aux

  17. Numerical Investigation of Aerodynamic Performance and Loads of a Novel Dual Rotor Wind Turbine

    Directory of Open Access Journals (Sweden)

    Behnam Moghadassian

    2016-07-01

    Full Text Available The objective of this paper is to numerically investigate the effects of the atmospheric boundary layer on the aerodynamic performance and loads of a novel dual-rotor wind turbine (DRWT. Large eddy simulations are carried out with the turbines operating in the atmospheric boundary layer (ABL and in a uniform inflow. Two stability conditions corresponding to neutral and slightly stable atmospheres are investigated. The turbines are modeled using the actuator line method where the rotor blades are modeled as body forces. Comparisons are drawn between the DRWT and a comparable conventional single-rotor wind turbine (SRWT to assess changes in aerodynamic efficiency and loads, as well as wake mixing and momentum and kinetic energy entrainment into the turbine wake layer. The results show that the DRWT improves isolated turbine aerodynamic performance by about 5%–6%. The DRWT also enhances turbulent axial momentum entrainment by about 3.3 %. The highest entrainment is observed in the neutral stability case when the turbulence in the ABL is moderately high. Aerodynamic loads for the DRWT, measured as out-of-plane blade root bending moment, are marginally reduced. Spectral analyses of ABL cases show peaks in unsteady loads at the rotor passing frequency and its harmonics for both rotors of the DRWT.

  18. Numerical investigation of aerodynamic performance of darrieus wind turbine based on the magnus effect

    Directory of Open Access Journals (Sweden)

    L Khadir

    2016-10-01

    Full Text Available The use of several developmental approaches is the researchers’ major preoccupation with the DARRIEUS wind turbine. This paper presents the first approach and results of a wide computational investigation on the aerodynamics of a vertical axis DARRIEUS wind turbine based on the MAGNUS effect. Consequently, wind tunnel tests were carried out to ascertain overall performance of the turbine and two-dimensional unsteady computational fluid dynamics (CFD models were generated to help understand the aerodynamics of this new performance. Accordingly, a moving mesh technique was used where the geometry of the turbine blade was cylinders. The turbine model was created in Gambit modeling software and then read into fluent software for fluid flow analysis. Flow field characteristics are investigated for several values of tip speed ratio (TSR, in this case we generated a new rotational speed ratio between the turbine and cylinder (δ = ωC/ωT. This new concept based on the MAGNUS approach provides the best configuration for better power coefficient values. The positive results of Cp obtained in this study are used to generate energy; on the other hand, the negative values of Cp could be used in order to supply the engines with energy.

  19. Experimental investigation on the optimal performance of Zeolite-water adsorption chiller

    KAUST Repository

    Myat, Aung

    2013-02-01

    This paper presents the performance testing of Zeolite adsorption cooling system driven by low grade waste heat source extracted from prime mover\\'s exhaust, power plant\\'s exhaust and the solar energy. The adsorbent FAM Z01 is used as an adsorbent in the adsorption chiller facility. Owing to its large equilibrium pore volume, it has the high affinity for the water vapor adsorbate. The key advantages of the Zeolite adsorption cooling system are: (i) it has no moving parts rendering less maintenance, (ii) the energy efficient means of cooling by the adsorption process with a low temperature heat source, (iii) the use of vapor pipes are replaced by self actuating vapor valves rendering smaller footprint area and (iv) it is environmental friendly with low carbon footprint. The experimental investigations were carried out for Zeolite adsorption chiller at different key operating conditions namely (i) heat source temperature, (ii) the cycle time and (iii) the heat recovery time. It is investigated that performance of coefficient (COP) of this system could be as high as 0.48 while the waste heat source temperature is applicable as low as 55 °C. © 2012.

  20. Model-based investigation of the electricity market. Unit commitment and power plant investments; Modellgestuetzte Untersuchung des Elektrizitaetsmarktes. Kraftwerkseinsatzplanung und -investitionen

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Ninghong

    2013-08-08

    The German Federal Government published its energy concept in September 2010 with a description of the road into the era of renewable energies. Therefore, the future renewable energy installed in Germany is expected to consist mostly of wind and solar, which are subject to intermittency of supply and significant fluctuations. The growing portion of energy generation by fluctuating sources is turning to a big challenge for the power plant unit commitment and the investment decisions as well. In this thesis, a fundamental electricity market model with combined modeling of these two aspects is developed. This model is subsequently applied to the German electricity market to investigate what kind of power plant investments are indispensable, considering the steadily increasing portion of energy generation from fluctuating sources, to ensure a reliable energy supply in a cost-effective way in the future. In addition, current energy policy in Germany regarding the use of renewable energy and nuclear energy is analyzed.

  1. Contribution des radios communautaires a l'education des ...

    African Journals Online (AJOL)

    Contribution des radios communautaires a l'education des populations rurales pour un developpement durable au Benin: etude de cas. ... Journal de la Recherche Scientifique de l'Université de Lomé. Journal Home · ABOUT THIS JOURNAL ...

  2. Numerical investigation on aerodynamic performance of a novel vertical axis wind turbine with adaptive blades

    International Nuclear Information System (INIS)

    Wang, Ying; Sun, Xiaojing; Dong, Xiaohua; Zhu, Bing; Huang, Diangui; Zheng, Zhongquan

    2016-01-01

    Highlights: • A novel vertical axis wind turbine with deformed blades is designed. • The universal tendency of power characteristics for simulated turbine is found. • The whole flow field of different turbines from the aspect of vortex is analyzed. • The tracking analysis of vortex at different positions for a blade is conducted. • The aerodynamic performance of turbine with three deformed blades is analyzed. - Abstract: In this paper, a novel Darrieus vertical axis wind turbine was designed whose blade can be deformed automatically into a desired geometry and thus achieve a better aerodynamic performance. A series of numerical simulations were conducted by utilizing the United Computational Fluid Dynamics code. Firstly, analysis and comparison of the performance of undeformed and deformed blades for the rotors having different blades were conducted. Then, the power characteristics of each simulated turbine were summarized and a universal tendency was found. Secondly, investigation on the effect of blade number and solidity on the power performance of Darrieus vertical axis wind turbine with deformable and undeformable blades was carried out. The results indicated that compared to conventional turbines with same solidity, the maximum percentage increase in power coefficient that the low solidity turbine with three deformable blades can achieve is about 14.56%. When solidity is high and also turbine operates at low tip speed ratio of less than the optimum value, the maximum power coefficient increase for the turbines with two and four deformable blades are 7.51% and 8.07%, respectively. However, beyond the optimal tip speed ratio, the power improvement of the turbine using the deformable blades seems not significant and even slightly worse than the conventional turbines. The last section studied the transient behavior of vortex and turbulent flow structures around the deformable rotor blade to explore the physical mechanism of improving aerodynamic

  3. Performance investigation of solid desiccant evaporative cooling system configurations in different climatic zones

    International Nuclear Information System (INIS)

    Ali, Muzaffar; Vukovic, Vladimir; Sheikh, Nadeem Ahmed; Ali, Hafiz M.

    2015-01-01

    Highlights: • Five configurations of a DEC system are analyzed in five climate zones. • DEC system model configurations are developed in Dymola/Modelica. • Performance analysis predicted a suitable DEC system configuration for each climate zone. • Results show that climate of Vienna, Sao Paulo, and Adelaide favors the ventilated-dunkle cycle. • While ventilation cycle configuration suits the climate of Karachi and Shanghai. - Abstract: Performance of desiccant evaporative cooling (DEC) system configurations is strongly influenced by the climate conditions and varies widely in different climate zones. Finding the optimal configuration of DEC systems for a specific climatic zone is tedious and time consuming. This investigation conducts performance analysis of five DEC system configurations under climatic conditions of five cities from different zones: Vienna, Karachi, Sao Paulo, Shanghai, and Adelaide. On the basis of operating cycle, three standard and two modified system configurations (ventilation, recirculation, dunkle cycles; ventilated-recirculation and ventilated-dunkle cycles) are analyzed in these five climate zones. Using an advance equation-based object-oriented (EOO) modeling and simulation approach, optimal configurations of a DEC system are determined for each climate zone. Based on the hourly climate data of each zone for its respective design cooling day, performance of each system configuration is estimated using three performance parameters: cooling capacity, COP, and cooling energy delivered. The results revealed that the continental/micro-thermal climate of Vienna, temperate/mesothermal climate of Sao Paulo, and dry-summer subtropical climate of Adelaide favor the use of ventilated-dunkle cycle configuration with average COP of 0.405, 0.89 and 1.01 respectively. While ventilation cycle based DEC configuration suits arid and semiarid climate of Karachi and another category of temperate/mesothermal climate of Shanghai with average COP of

  4. Investigating antecedent factors to job performance: Contemporary evidence from government supply management professionals

    Directory of Open Access Journals (Sweden)

    Chengedzai Mafini

    2015-06-01

    Full Text Available Purpose: The purpose of the study was to investigate the influence of transformational leadership, organisational citizenship behaviour and quality of work life on job performance amongst supply management professionals employed by the South African government. Rationale: The depressed job performance of supply management professionals in the South African government presents an impetus to generate new empirical information on the subject in order to find solutions. Methodology: A quantitative survey approach was followed using a sample of 264 supply management professionals employed in the South African government and were based in Gauteng Province. A Confirmatory Factor Analysis (CFA was conducted to assess psychometric properties of the measurement instrument. Hypotheses were tested using Structural Equation Modelling (SEM. Findings: Transformational leadership had positive and significant relationships with organisational citizenship behaviour and quality of work life. Quality of work life exerted a greater influence of job performance than organisational citizenship behaviour. Value of research: The study provides current evidence of the influence of transformational leadership on organisational citizenship behaviour and quality of work life, as well as the influence of organisational citizenship behaviour and quality of work life on job performance amongst supply management professionals. Conclusion: Transformational leadership has a positive influence on organisational citizenship behaviour and quality of work life amongst supply management professionals in the government. Both organisational citizenship behaviour and quality of work life exerta positive influence on the job performance of supply management professionals in the government. Future studies should be extended to other professional cohorts in both the private and the government sectors.

  5. Mesure des performances de reconstruction des électrons et recherche de Supersymétrie dans les canaux avec deux leptons de même charge dans les données du détecteur ATLAS.

    CERN Document Server

    Maurer, Julien; Pralavorio, Pascal

    The first three years of operation of the ATLAS experiment at LHC, with fruitful results, have opened the way to experimental physics at the TeV scale. The work realized in this context included some performance aspects (electron reconstruction) as well as analysis (search for new physics). The first part is devoted to in-situ measurements of electron reconstruction and identification efficiencies. The methodology employed to perform these measurements in data is presented in details, as well as the methods developped for estimating the residual background. The second part deals with a search for Supersymmetry in events with two leptons (electrons or muons) of identical charges, together with jets and in some cases missing transverse energy, based on the whole dataset colledcted by ATLAS in 2012 (namely 21 fb$^{-1}$ at $\\sqrt s= 8$ TeV). These final states are particularly adapted to searches for gluinos or third generation squarks. The main aspects of the analysis are described, in particular the methods ...

  6. Evaluation des performances de la production de graines par tamisage manuel du sol chez trois variétés de Stylosanthes guianensis (Aublet Swartz, dans les conditions du Plateau des Batéké (RDC

    Directory of Open Access Journals (Sweden)

    Bulakali, BP.

    2013-01-01

    Full Text Available Performance Assessment of the Production of Seeds by Manual Sieving of the Soil of Three Varieties of Stylosanthes guianensis (Aublet Swartz under the Conditions of the Batéké Plateau (DRC. In manual agriculture with low resources level, Stylosanthes guianensis is one of the most interesting cover crop for developing direct seeding mulch-based cropping systems. To promote its cultivation in the DRC, the performances of a seed production method by sieving of the soil were evaluated for three varieties of Stylo (a local ecotype, CIAT 184 variety, and 202cc variety in two sites of the Batéké plateau characterized by contrasted fertility levels. The results obtained demonstrate the interest of the seed multiplication method tested, both in quantities and quality of the produced seeds. The production cost of one kg of seeds varies with the soil fertility, the planting date, and the cultivar. Among the three compared varieties, CIAT 184 variety produced the highest quantity of seeds. If sown at the beginning of the long rainy season, after a long fallow, in one of the most fertile soils of the plateau, this cultivar can produce 600 kg ha-1 seed in the first year of cultivation with a production cost of USD 1.31 kg-1, equivalent to less than 0.5 man.day.kg-1.

  7. La convergence des rôles respectifs des relationnistes et des journalistes influence-t-elle la perception qu'ils ont les uns des autres?

    DEFF Research Database (Denmark)

    Valentini, Chiara

    2017-01-01

    la convergence des rôles respectifs des praticiens des relations publiques et des journalistes a un effet favorable sur la perception qu’ils ont les uns des autres. L’effet est plus marqué chez les praticiens des relations publiques, car leur vision de la profession en journalisme correspond à celle...

  8. Developpement des betons semi autoplacants a rheologie adaptee pour des infrastructures

    Science.gov (United States)

    Sotomayor Cruz, Cristian Daniel

    Au cours des dernières décennies, les infrastructures canadiennes et québécoises comportent plusieurs structures en béton armé présentant des problèmes de durabilité dus aux conditions climatiques sévères, à la mauvaise conception des structures, à la qualité des matériaux, aux types des bétons choisis, aux systèmes de construction ou à l'existence d'événements incontrôlables. En ce qui concerne le choix du béton pour la construction des infrastructures, une vaste gamme de béton divisée en deux principaux types peut être utilisée: le béton conventionnel vibré (BCV) et le béton autoplaçant (BAP). Dans le cas d'un BCV, la consolidation inadéquate par vibration a été un problème récurrent, occasionnant des dommages structuraux. Ceci a conduit à une réduction de la durabilité et à une augmentation du coût d'entretien et de réparation des infrastructures. Rien que l'utilisation d'un BAP a des avantages tels que l'élimination de la vibration, la réduction des coûts de main d'oeuvre et l'amélioration de la qualité des structures, néanmoins, le coût initial d'un BAP par rapport à un BCV ne permet pas encore de généraliser son utilisation dans l'industrie de la construction. Ce mémoire présente la conception d'une nouvelle gamme de béton semi-autoplaçant pour la construction des infrastructures (BSAP-I) exigeant une vibration minimale. Il s'agit de trouver un équilibre optimal entre la rhéologie et le coût initial du nouveau béton pour conférer une bonne performance structurale et économique aux structures. Le programme expérimental établi a premièrement permis d'évaluer la faisabilité d'utilisation des BSAP-I pour la mise en place des piliers d'une infrastructure de pont à Sherbrooke. En plus, l'utilisation d'un plan d'expériences a permis l'évaluation de trois paramètres de formulation sur les propriétés des mélanges de BSAP-I à l'état frais et durci. Finalement, l'évaluation de la performance des

  9. The Investigation of the Relationship between Children's 50m Freestyle Swimming Performances and Motor Performances

    Science.gov (United States)

    Aktug, Zait Burak; Iri, Ruckan; Top, Elif

    2018-01-01

    The aim of the study is to examine the relationship between children's 50 m freestyle swimming performances and motor performances. There were 32 swimmers (male = 21, female = 11), who had been swimming for at least one and a half year, participated in the study. The motor performances of the participating swimmers were determined through the…

  10. Investigation of modern methods of probalistic sensitivity analysis of final repository performance assessment models (MOSEL)

    International Nuclear Information System (INIS)

    Spiessl, Sabine; Becker, Dirk-Alexander

    2017-06-01

    Sensitivity analysis is a mathematical means for analysing the sensitivities of a computational model to variations of its input parameters. Thus, it is a tool for managing parameter uncertainties. It is often performed probabilistically as global sensitivity analysis, running the model a large number of times with different parameter value combinations. Going along with the increase of computer capabilities, global sensitivity analysis has been a field of mathematical research for some decades. In the field of final repository modelling, probabilistic analysis is regarded a key element of a modern safety case. An appropriate uncertainty and sensitivity analysis can help identify parameters that need further dedicated research to reduce the overall uncertainty, generally leads to better system understanding and can thus contribute to building confidence in the models. The purpose of the project described here was to systematically investigate different numerical and graphical techniques of sensitivity analysis with typical repository models, which produce a distinctly right-skewed and tailed output distribution and can exhibit a highly nonlinear, non-monotonic or even non-continuous behaviour. For the investigations presented here, three test models were defined that describe generic, but typical repository systems. A number of numerical and graphical sensitivity analysis methods were selected for investigation and, in part, modified or adapted. Different sampling methods were applied to produce various parameter samples of different sizes and many individual runs with the test models were performed. The results were evaluated with the different methods of sensitivity analysis. On this basis the methods were compared and assessed. This report gives an overview of the background and the applied methods. The results obtained for three typical test models are presented and explained; conclusions in view of practical applications are drawn. At the end, a recommendation

  11. Performance investigation of a salt gradient solar pond coupled with desalination facility near the Dead Sea

    International Nuclear Information System (INIS)

    Saleh, A.; Qudeiri, J.A.; Al-Nimr, M.A.

    2011-01-01

    Solar ponds provide the most convenient and least expensive option for heat storage for daily and seasonal cycles. This is particularly important for a desalination facility, if steady and constant water production is required. If, in addition to high storage capacity, other favorable conditions exist, the salt gradient solar ponds (SGSPs) are expected to be able to carry the entire load of a large-scale flash desalination plants without dependence upon supplementary sources. This paper presents a performance investigation of a SGSP coupled with desalination plant under Jordanian climatic conditions. This is particularly convenient in the Dead Sea region characterized by high solar radiation intensities, high ambient temperature most of the year, and by the availability of high concentration brine. It was found that a 3000 m 2 solar pond installed near the Dead Sea is able to provide an annual average production rate of 4.3 L min -1 distilled water compared with 3.3 L min -1 that would be produced by El Paso solar pond, which has the same surface area. Based on this study, solar ponds appear to be a feasible and an appropriate technology for water desalination near the Dead Sea in Jordan. -- Research highlights: → A performance investigation of a solar pond coupled with desalination plant. → Dead Sea area is characterized by availability of high solar radiation and brine. → The Dead Sea solar pond can provide production rate of 4.3 L min -1 . → El Paso solar pond has production rate of 3.32 L min -1 . The improvement is about 30%. → The solar pond with desalination investigated showed to be a feasible technology.

  12. Investigation of modern methods of probalistic sensitivity analysis of final repository performance assessment models (MOSEL)

    Energy Technology Data Exchange (ETDEWEB)

    Spiessl, Sabine; Becker, Dirk-Alexander

    2017-06-15

    Sensitivity analysis is a mathematical means for analysing the sensitivities of a computational model to variations of its input parameters. Thus, it is a tool for managing parameter uncertainties. It is often performed probabilistically as global sensitivity analysis, running the model a large number of times with different parameter value combinations. Going along with the increase of computer capabilities, global sensitivity analysis has been a field of mathematical research for some decades. In the field of final repository modelling, probabilistic analysis is regarded a key element of a modern safety case. An appropriate uncertainty and sensitivity analysis can help identify parameters that need further dedicated research to reduce the overall uncertainty, generally leads to better system understanding and can thus contribute to building confidence in the models. The purpose of the project described here was to systematically investigate different numerical and graphical techniques of sensitivity analysis with typical repository models, which produce a distinctly right-skewed and tailed output distribution and can exhibit a highly nonlinear, non-monotonic or even non-continuous behaviour. For the investigations presented here, three test models were defined that describe generic, but typical repository systems. A number of numerical and graphical sensitivity analysis methods were selected for investigation and, in part, modified or adapted. Different sampling methods were applied to produce various parameter samples of different sizes and many individual runs with the test models were performed. The results were evaluated with the different methods of sensitivity analysis. On this basis the methods were compared and assessed. This report gives an overview of the background and the applied methods. The results obtained for three typical test models are presented and explained; conclusions in view of practical applications are drawn. At the end, a recommendation

  13. Inquiry-based laboratory investigations and student performance on standardized tests in biological science

    Science.gov (United States)

    Patke, Usha

    Achievement data from the 3rd International Mathematics and Sciences Study and Program for International Student Assessment in science have indicated that Black students from economically disadvantaged families underachieve at alarming rates in comparison to White and economically advantaged peer groups. The study site was a predominately Black, urban school district experiencing underachievement. The purpose of this correlational study was to examine the relationship between students' use of inquiry-based laboratory investigations and their performance on the Biology End of Course Test, as well as to examine the relationship while partialling out the effects of student gender. Constructivist theory formed the theoretical foundation of the study. Students' perceived levels of experience with inquiry-based laboratory investigations were measured using the Laboratory Program Variable Inventory (LPVI) survey. LPVI scores of 256 students were correlated with test scores and were examined by student gender. The Pearson correlation coefficient revealed a small direct correlation between students' experience in inquiry-based laboratory investigation classes and standardized test scores on the Biology EOCT. A partial correlational analysis indicated that the correlation remained after controlling for gender. This study may prompt a change from teacher-centered to student-centered pedagogy at the local site in order to increase academic achievement for all students. The results of this study may also influence administrators and policy makers to initiate local, state, or nationwide curricular development. A change in curriculum may promote social change as students become more competent, and more able, to succeed in life beyond secondary school.

  14. Investigation of protein adsorption performance of Ni2+-attached diatomite particles embedded in composite monolithic cryogels.

    Science.gov (United States)

    Ünlü, Nuri; Ceylan, Şeyda; Erzengin, Mahmut; Odabaşı, Mehmet

    2011-08-01

    As a low-cost natural adsorbent, diatomite (DA) (2 μm) has several advantages including high surface area, chemical reactivity, hydrophilicity and lack of toxicity. In this study, the protein adsorption performance of supermacroporous composite cryogels embedded with Ni(2+)-attached DA particles (Ni(2+)-ADAPs) was investigated. Supermacroporous poly(2-hydroxyethyl methacrylate) (PHEMA)-based monolithic composite cryogel column embedded with Ni(2+)-ADAPs was prepared by radical cryo-copolymerization of 2-hydroxyethyl methacrylate (HEMA) with N,N'-methylene-bis-acrylamide (MBAAm) as cross-linker directly in a plastic syringe for affinity purification of human serum albumin (HSA) both from aqueous solutions and human serum. The chemical composition and surface area of DA was determined by XRF and BET method, respectively. The characterization of composite cryogel was investigated by SEM. The effect of pH, and embedded Ni(2+)-ADAPs amount, initial HSA concentration, temperature and flow rate on adsorption were studied. The maximum amount of HSA adsorption from aqueous solution at pH 8.0 phosphate buffer was very high (485.15 mg/g DA). It was observed that HSA could be repeatedly adsorbed and desorbed to the embedded Ni(2+)-ADAPs in poly(2-hydroxyethyl methacrylate) composite cryogel without significant loss of adsorption capacity. The efficiency of albumin adsorption from human serum before and after albumin adsorption was also investigated with SDS-PAGE analyses. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Investigation of the Influence of Hydrocyclone Geometric and Flow Parameters on Its Performance Using CFD

    Directory of Open Access Journals (Sweden)

    Oboetswe Seraga Motsamai

    2010-01-01

    Full Text Available Effectiveness and efficiency of hydro-cyclone separators are highly dependent on their geometrical parameters and flow characteristics. Performance of the hydro-cyclone can, therefore, be improved by modifying the geometrical parameters or flow characteristics. The mining and chemical industries are faced with problems of separating ore-rich stones from the nonore-rich stones. Due to this problem a certain amount of precious metals is lost to the dumping sites. Plant managers try to solve these problems by stockpiling what could be useless stones, so that they can be reprocessed in the future. Reprocessing is not a sustainable approach, because the reprocessed material would give lower yield as compared to the production costs. Particulate separation in a hydro-cyclone has been investigated in this paper, by using computational fluid dynamics. The paper investigated the influence of various flow and geometric parameters on particulate separation. Optimal parameters for efficient separation have been determined for the density of fluid, diameter of the spigot, and diameter of the vortex finder. The principal contribution of this paper is that key parameters for design optimization of the hydro-cyclone have been investigated.

  16. Promouvoir l'entrepreneuriat inclusif des jeunes et des femmes ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le projet vise à analyser la contribution réelle et potentielle de l'entrepreneuriat inclusif au bien-être des jeunes et des femmes en Côte d'Ivoire, au Burkina Faso et au Kenya. Après un état des lieux de la pratique de l'entrepreneuriat inclusif dans chacun des pays ciblés, l'équipe de recherche étudiera son incidence sur ...

  17. Performance investigation of heat insulation solar glass for low-carbon buildings

    International Nuclear Information System (INIS)

    Cuce, Erdem; Young, Chin-Huai; Riffat, Saffa B.

    2014-01-01

    Highlights: • U-value of HISG is found to be 1.10 W/m 2 K. • Maximum temperature difference is achieved by HISG with 12.70 °C. • HISG provides two times better insulation than standard double glazed windows. • HISG generates over 40 W electricity from a glazing surface of 0.66 m 2 . • 100% of UV in incoming solar radiation is absorbed by HISG. - Abstract: Heat insulation solar glass (HISG), which has been recently developed by Professor Chin-Huai Young in Taiwan is an extraordinary glazing technology for low/zero carbon buildings. HISG differs from traditional glazing technologies with its ability of producing electricity. It also offers some additional features such as thermal insulation, sound insulation, self-cleaning and energy saving. In this work, thermal insulation, power generation and optical performance of HISG are experimentally investigated. Thermal insulation performance of HISG is analysed through standardized co-heating test methodology, and the results are compared with different traditional double glazed window samples. For the power generation and optical performance of HISG, two samples (air filled HISG and Argon filled HISG) are experimentally investigated in real and simulated operating conditions. The results indicate that both configurations show similar performance in terms of power generation. Under a solar intensity of 850 W/m 2 , over 40 W electrical power is achieved from HISG samples with a glazing area of 0.66 m 2 . Performance of samples under solar simulator is not found to be promising due to the absence of UV and IR parts in the artificial light source. In terms of thermal insulation ability, HISG is also found to be attractive. The average U-value of HISG is determined to be 1.10 W/m 2 K, which is two times better than standard double glazed windows. Some simulation results for two different cities (Taipei, Taiwan and Nottingham, UK) demonstrating the energy saving potential of HISG are also presented

  18. Experimental investigation of the seismic performance of the R/C frames with reinforced masonry infills

    Science.gov (United States)

    Tanjung, Jafril; Maidiawati, Nugroho, Fajar

    2017-10-01

    Intensive studies regarding the investigation of seismic performance of reinforced concrete (R/C) frames which are infilled with brick masonry walls have been carried out by several researchers within the last three-decades. According to authors' field and experimentally experiences conclude that the unreinforced brick masonry infills significantly contributes to increase the seismic performance of the R/C frame structure. Unfortunately, the presence of brick masonry infill walls causes several undesirable effects such as short column, soft-storey, torsion and out of plane collapse. In this study, a strengthening technique for the brick masonry infills were experimentally investigated to improve the seismic performance of the R/C frame structures. For this purpose, four experimental specimens have been prepared, i.e. one of bare R/C frame (BF), one of R/C frame infilled with unreinforced brick-masonry wall (IFUM) and two of R/C frames were infilled with reinforced brick-masonry wall (IFRM-1 and IFRM-2). The bare frame and R/C frame infilled with unreinforced brick-masonry wall represents the typical R/C buildings' construction in Indonesia assuming the brick-masonry wall as the non-structural elements. The brick-masonry wall infills in specimens IFRM-1 and IFRM-2 were strengthened by using embedded ϕ4 plain steel bar on their diagonal and center of brick-masonry wall, respectively. All specimens were laterally pushed-over. The lateral loading and its lateral displacement, failure mechanism and their crack pattern were recorded during experimental works. Comparison of the experimental results of these four specimens conclude that the strengthening of the brick-masonry infills wall gave the significantly increasing of the seismic performance of the R/C frame. The seismic performance was evaluated based on the lateral strength of the R/C specimen. The embedded plain steel bar on brick-masonry also reduces the diagonal crack on the brick-masonry wall. It seems that

  19. Investigation on high efficiency volume Bragg gratings performances for spectrometry in space environment

    Science.gov (United States)

    Loicq, Jérôme; Stockman, Y.; Georges, Marc; Gaspar Venancio, Luis M.

    2017-11-01

    The special properties of Volume Bragg Gratings (VBGs) make them good candidates for spectrometry applications where high spectral resolution, low level of straylight and low polarisation sensitivity are required. Therefore it is of interest to assess the maturity and suitability of VBGs as enabling technology for future ESA missions with demanding requirements for spectrometry. The VBGs suitability for space application is being investigated in the frame of a project led by CSL and funded by the European Space Agency. The goal of this work is twofold: first the theoretical advantages and drawbacks of VBGs with respect to other technologies with identical functionalities are assessed, and second the performances of VBG samples in a representative space environment are experimentally evaluated. The performances of samples of two VBGs technologies, the Photo-Thermo-Refractive (PTR) glass and the DiChromated Gelatine (DCG), are assessed and compared in the Hα, O2-B and NIR bands. The tests are performed under vacuum condition combined with temperature cycling in the range of 200 K to 300K. A dedicated test bench experiment is designed to evaluate the impact of temperature on the spectral efficiency and to determine the optical wavefront error of the diffracted beam. Furthermore the diffraction efficiency degradation under gamma irradiation is assessed. Finally the straylight, the diffraction efficiency under conical incidence and the polarisation sensitivity is evaluated.

  20. Numerical investigation on effect of blade shape for stream water wheel performance.

    Science.gov (United States)

    Yah, N. F.; Oumer, A. N.; Aziz, A. A.; Sahat, I. M.

    2018-04-01

    Stream water wheels are one of the oldest and commonly used types of wheels for the production of energy. Moreover, they are economical, efficient and sustainable. However, few amounts of research works are available in the open literature. This paper aims to develop numerical model for investigation of the effect of blade shape on the performance of stream water wheel. The numerical model was simulated using Computational Fluid Dynamics (CFD) method and the developed model was validated by comparing the simulation results with experimental data obtained from literature. The performance of straight, curved type 1 and curved type 2 was observed and the power generated by each blade design was identified. The inlet velocity was set to 0.3 m/s static pressure outlet. The obtained results indicate that the highest power was generated by the Curved type 2 compared to straight blade and curved type 1. From the CFD result, Curved type 1 was able to generate 0.073 Watt while Curved type 2 generate 0.064 Watt. The result obtained were consistent with the experiment result hence can be used the numerical model as a guide to numerically predict the water wheel performance

  1. Investigation of Product Performance of Al-Metal Matrix Composites Brake Disc using Finite Element Analysis

    International Nuclear Information System (INIS)

    Fatchurrohman, N; Marini, C D; Suraya, S; Iqbal, AKM Asif

    2016-01-01

    The increasing demand of fuel efficiency and light weight components in automobile sectors have led to the development of advanced material parts with improved performance. A specific class of MMCs which has gained a lot of attention due to its potential is aluminium metal matrix composites (Al-MMCs). Product performance investigation of Al- MMCs is presented in this article, where an Al-MMCs brake disc is analyzed using finite element analysis. The objective is to identify the potentiality of replacing the conventional iron brake disc with Al-MMCs brake disc. The simulation results suggested that the MMCs brake disc provided better thermal and mechanical performance as compared to the conventional cast iron brake disc. Although, the Al-MMCs brake disc dissipated higher maximum temperature compared to cast iron brake disc's maximum temperature. The Al-MMCs brake disc showed a well distributed temperature than the cast iron brake disc. The high temperature developed at the ring of the disc and heat was dissipated in circumferential direction. Moreover, better thermal dissipation and conduction at brake disc rotor surface played a major influence on the stress. As a comparison, the maximum stress and strain of Al-MMCs brake disc was lower than that induced on the cast iron brake disc. (paper)

  2. Performance investigation of low-toxic organic corrosion inhibitors in amine treating unit

    International Nuclear Information System (INIS)

    Veawab, A.; Tanthapanichakoon, W.

    2003-01-01

    Amine treating unit is constantly subject to severe corrosion problems leading to extra expenditure and operational limitations. Heavy-metal vanadium compounds are extensively used as corrosion inhibitors to suppress the severe corrosion to an acceptable level. In recent years, the fact that these vanadium compounds are inherently toxic and can potentially pose adverse impacts on the human health and the environment has brought about environmental awareness that causes their uses costly due to the difficulty in waste disposal. To respond to the environmental concern and reduce cost of waste disposal as well as prepare for more stringent regulations for chemical uses, the development of low-toxic corrosion inhibitors is necessary. This work therefore focuses on an investigation of inhibition performance of a number of organic and inorganic compounds that have relatively low toxicity in comparison with conventional inhibitors. The performance evaluation was carried out through corrosion experiments using carbon steel specimens. The experiments were done in 3 and 5 kmol/m 3 monoethanolamine (MEA) solution saturated with CO 2 at 80 o C. It was found that several tested compounds have potential to be effective low-toxic corrosion inhibitors. The promising compounds provide reasonable and in some cases comparable protection performance to the conventional inhibitor. (author)

  3. A Review and Performance Investigation of NPCC Based UPQC by Using Various Artificial Intelligence Techniques

    Directory of Open Access Journals (Sweden)

    Venkata Rami Reddy K

    2017-03-01

    Full Text Available This paper presents a comprehensive review and performance investigation of Neutral Point Clamped Converter (NPCC based Unified Power Quality Conditioner (UPQC by using Artificial Intelligent (AI techniques. A Novel application of various levels of Diode Clamped Multi-Level Inverters [DCMLI] with Anti Phase Opposition and Disposition (APOD Pulse Width Modulation (PWM Scheme to Unified Power Quality Conditioner (UPQC. The Power Quality problem became a burning issues since the starting of high voltage AC transmission system. Hence, in this article it has been discussed to mitigate the PQ issues in high voltage AC systems through a three phase four wire Unified Power Quality Conditioner (UPQC under non-linear loads. The emphasised PQ problems such as voltage and current harmonics along with voltage sags and swells have also been discussed with improved performance. Also, it proposes to control the DCMLI based UPQC through conventional control schemes. Thus application of these control technique makes the system performance in par with the standards and also compared with existing system. The simulation results based on MATLAB/Simulink are discussed in detail to support the concept developed in the paper.

  4. Systematic investigation of the effects of organic film structure on light emitting diode performance

    Science.gov (United States)

    Joswick, M. D.; Campbell, I. H.; Barashkov, N. N.; Ferraris, J. P.

    1996-09-01

    We present a systematic investigation of the effects of organic film structure on light emitting diode (LED) performance. Metal/organic film/metal LEDs were fabricated using a five ring, poly(phenylene vinylene) related oligomer as the active layer. The structure of the vacuum evaporated oligomer films was varied from amorphous to polycrystalline by changing the substrate temperature during deposition. The intrinsic properties of the oligomer films and the LED performance were measured. The measured intrinsic film properties include: optical absorption, photoluminescence (PL) spectra, PL lifetime, PL efficiency, and effective carrier mobility. The measured device characteristics include current-voltage, capacitance-voltage, electroluminescence (EL) efficiency, and the contact metal/organic film Schottky barrier heights. The optical absorption and PL properties of the films are weakly dependent on film structure but the effective carrier mobility decreases with increasing crystallinity. The EL quantum efficiency decreases by more than one order of magnitude, the drive voltage at a fixed current increases, and the electron Schottky barrier height increases as the crystallinity of the film is increased. The diode current-voltage characteristic is determined by the dominant hole current and the electroluminescence efficiency is controlled by the contact limited electron injection. These results demonstrate significant effects of organic film structure on the performance of organic LEDs.

  5. Systematic investigation of the effects of organic film structure on light emitting diode performance

    Energy Technology Data Exchange (ETDEWEB)

    Joswick, M.D.; Campbell, I.H. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Barashkov, N.N.; Ferraris, J.P. [The University of Texas at Dallas, Richardson, Texas 75080 (United States)

    1996-09-01

    We present a systematic investigation of the effects of organic film structure on light emitting diode (LED) performance. Metal/organic film/metal LEDs were fabricated using a five ring, poly(phenylene vinylene) related oligomer as the active layer. The structure of the vacuum evaporated oligomer films was varied from amorphous to polycrystalline by changing the substrate temperature during deposition. The intrinsic properties of the oligomer films and the LED performance were measured. The measured intrinsic film properties include: optical absorption, photoluminescence (PL) spectra, PL lifetime, PL efficiency, and effective carrier mobility. The measured device characteristics include current{endash}voltage, capacitance{endash}voltage, electroluminescence (EL) efficiency, and the contact metal/organic film Schottky barrier heights. The optical absorption and PL properties of the films are weakly dependent on film structure but the effective carrier mobility decreases with increasing crystallinity. The EL quantum efficiency decreases by more than one order of magnitude, the drive voltage at a fixed current increases, and the electron Schottky barrier height increases as the crystallinity of the film is increased. The diode current{endash}voltage characteristic is determined by the dominant hole current and the electroluminescence efficiency is controlled by the contact limited electron injection. These results demonstrate significant effects of organic film structure on the performance of organic LEDs. {copyright} {ital 1996 American Institute of Physics.}

  6. An Investigation of the Factors Affecting Performance of Environmental Impact Assessment Practices (EIA in Pakistan

    Directory of Open Access Journals (Sweden)

    Shahbaz Hussain

    2015-01-01

    Full Text Available Environmental Impact Assessment is used to detect changes that a proposed project may have on environment. The intent of present study is to investigate impact of institutional capacity and legal framework on performance of Environmental Impact Assessment practices in Pakistan such as screening, scoping and mitigation, environmental management plan and reporting. Sample of 200 EIA professionals have been selected by using random sampling approach from all provinces of Pakistan. Data has been collected through structured questionnaire and analysed by using AMOS 19 (Analysis of Moment Structures software. Results of path analysis indicated that institutional capacity and legal framework have significant direct impact on performance of all EIA practices in Pakistan. Model fit statistics such as GFI, RMR, NFI, IFI, TLI, RFI, CFI indicate the fitness of research model in this context. It has been suggested that there must be relevant and sufficient human resources that can uplift institutional capacity and legal framework must be well implemented because it will lead to enhanced performance of EIA practices in Pakistan.

  7. An investigation on task-technology fit of mobile nursing information systems for nursing performance.

    Science.gov (United States)

    Hsiao, Ju-Ling; Chen, Rai-Fu

    2012-05-01

    This study investigates factors affecting the fit between nursing tasks and mobile nursing information systems and the relationships between the task-technology fit of mobile nursing information systems and nurse performance from the perspective of task-technology fit. Survey research recruited nursing staffs as subjects from selected case hospital. A total of 310 questionnaires were sent out, and 219 copies were obtained, indicating a valid response rate of 70.6%. Collected data were analyzed using the structural equation modeling technique. Our study found that dependence tasks have positive effects on information acquisition (γ=0.234, Pinformation identification (γ=0.478, Pinformation acquisition (γ=0.213, Pintroduction of mobile nursing information systems in assisting nursing practices can help facilitate both independent and dependent nursing tasks. Our study discovered that the supporting functions of mobile nursing information systems have positive effects on information integration and interpretation (γ=0.365, Pinformation acquisition (γ=0.253, Pinformation systems have positive effects on information acquisition (γ=0.318, Pinformation integration and interpretation (γ=0.143, Pinformation identification (β=.055, Pinformation acquisition (β=.176, Pinformation integration and interpretation (β=.706, Pinformation systems have positive effects on nursing performance, indicating 83.2% of totally explained variance. As shown, the use of mobile nursing information systems could provide nursing staffs with real-time and accurate information to increase efficiency and effectiveness in patient-care duties, further improving nursing performance.

  8. Tests of the use of cation exchange organic resins for the decontamination of radioactive aqueous effluents; Essais d'emploi des resines organiques echangeuses de cations pour la decontamination des effluents aqueux radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Bourdrez, Jean; Girault, Jacques; Wormser, Gerald

    1962-12-14

    The authors report tests performed in laboratory and results obtained during an investigation of the use of synthetic ion exchangers for the decontamination of radioactive effluents of moderate activity level and with a non neglectable salt loading. Resins are used under sodium form and regenerated after each fixing operation. Once decontaminated and free of its disturbing ions, the regenerating agent (NaCl) is used for several operations. The authors present the used resins, the treated effluents, describe the tests, and discuss the obtained results [French] Dans ce rapport nous faisons le point des essais et resultats obtenus au laboratoire au cours d'une etude concernant l'utilisation des echangeurs d'ions synthetiques pour la decontamination des effluents radioactifs de niveau d'activite moyenne et de charge en sels non negligeable. Les resines sont employees sous forme sodique et regenerees apres chaque operation de fixation. Le regenerant decontamine et debarrasse de ses ions genants est utilise pour plusieurs operations d'elution. Les seuls residus a stocker proviennent d'une part eventuellement d'un pretraitement de l'effluent, d'autre part, dans tous les cas des precipites consecutifs a la purification de l'eluant dont le traitement chimique est plus aise et donne lieu a des boues beaucoup moins volumineuses qu'une coprecipitation effectuee sur la totalite de l'effluent. (auteurs)

  9. Investigation of correlations in the breakup of He{sup 8}; Etude des correlations dans la dissociation de l'He{sup 8}

    Energy Technology Data Exchange (ETDEWEB)

    Laurent, B

    2007-11-15

    Correlations in light neutron-rich nuclei are of considerable importance in understanding their structure. In this context the breakup of He{sup 8} into He{sup 6} + 2n has been investigated at 15 MeV/nucleon. The measurements were undertaken using a setup composed of two detector arrays: CHARISSA to detect the charged fragments and DEMON to detect the neutrons. The interpretation of the results was facilitated using a Monte Carlo simulation which was developed to take into account the correlations, the reaction and the experimental setup. Two techniques were used to study the correlations in the breakup of He{sup 8}. The first, intensity interferometry, provides, via the construction of the neutron-neutron correlation function, for a first estimate of the source size and thus the average separation between the neutrons. The second, using Dalitz plots, allows both the neutron-neutron and core-neutron correlations to be probed. Here, sequential decay via the ground state resonance of He{sup 7} and has been found to dominate the dissociation of He{sup 8}. The spatial and temporal characteristics of the breakup of He{sup 8} have thus been deduced and a root-mean-square separation between the two valence neutrons in the continuum states was estimated to be (7.3 {+-} 0.6) fm with a time delay between their emission of (1000 {+-} 300) fm/c. (author)

  10. Investigation of correlations in the breakup of He{sup 8}; Etude des correlations dans la dissociation de l'He{sup 8}

    Energy Technology Data Exchange (ETDEWEB)

    Laurent, B

    2007-11-15

    Correlations in light neutron-rich nuclei are of considerable importance in understanding their structure. In this context the breakup of He{sup 8} into He{sup 6} + 2n has been investigated at 15 MeV/nucleon. The measurements were undertaken using a setup composed of two detector arrays: CHARISSA to detect the charged fragments and DEMON to detect the neutrons. The interpretation of the results was facilitated using a Monte Carlo simulation which was developed to take into account the correlations, the reaction and the experimental setup. Two techniques were used to study the correlations in the breakup of He{sup 8}. The first, intensity interferometry, provides, via the construction of the neutron-neutron correlation function, for a first estimate of the source size and thus the average separation between the neutrons. The second, using Dalitz plots, allows both the neutron-neutron and core-neutron correlations to be probed. Here, sequential decay via the ground state resonance of He{sup 7} and has been found to dominate the dissociation of He{sup 8}. The spatial and temporal characteristics of the breakup of He{sup 8} have thus been deduced and a root-mean-square separation between the two valence neutrons in the continuum states was estimated to be (7.3 {+-} 0.6) fm with a time delay between their emission of (1000 {+-} 300) fm/c. (author)

  11. Experimental investigation of the chemical looping method on a 1 MW pilot plant; Experimentelle Untersuchung des Chemical Looping Verfahrens an einer 1 MW Versuchsanlage

    Energy Technology Data Exchange (ETDEWEB)

    Orth, Matthias

    2014-08-27

    Attempting to counteract the consequences of climate change, leading industrial nations have agreed on reducing their CO{sub 2} emissions significantly. To reach these reduction goals, it is essential to reduce the CO{sub 2} emissions in the field of energy conversion. This PHD thesis covers the field of chemical looping combustion, a technology that uses fossil fuels for energy conversion with inherent capture of CO{sub 2}. Since the research regarding chemical looping had so far focused mainly on lab scale or small scale experiments, a 1 MW pilot plant has been erected at Technische Universitaet Darmstadt in order to investigate the process in a semi-industrial scale and to check the process efficiency with commercially usable equipment. This pilot consists of two interconnected fluidized bed reactors and has an overall height of more than 11 m. In this thesis, some experiments with ilmenite - used as the oxygen carrier - are explained. Furthermore, the design, erection and commissioning of the pilot plant are presented as well as the results of the first test campaigns. The evaluation of the latter proves that the process can be handled in the design configuration and that CO{sub 2} can be safely captured in a pilot plant of this scale.

  12. Mécanique des fluides fondements et applications

    CERN Document Server

    Cengel, Yunus A

    2017-01-01

    La mécanique des fluides est un outil performant qui permet d'expliquer les phénomènes qui nous entourent de l'échelle microscopique à l'échelle macroscopique. Elle est aussi à la base du développement de nombreuses technologies. Cet ouvrage à destination des étudiants donne une vision complète de la mécanique des fluides. Bien que la mécanique des fluides puisse souvent paraître rébarbative aux yeux des étudiants, cet ouvrage valorise ce domaine d'enseignement en l'illustrant de nombreux exemples issus de l'ingénierie navale, l'aéronautique, la météorologie, etc.

  13. La fabrique des sciences des institutions aux pratiques

    CERN Document Server

    Benninghoff, Martin; Crettaz von Roten, Fabienne; Merz, Martina

    2006-01-01

    Aujourd'hui, les façons de produire, d'organiser, d'évaluer et d'utiliser les savoirs sont en profond débat. De plus en plus, l'Etat, la société civile et l'économie tentent d'influencer les activités des universités et des laboratoires de recherche. Ces développements mettent à l'épreuve tout à la fois les fondements des systèmes d'enseignement supérieur et de recherche, l'autonomie des institutions scientifiques, la définition des frontières des savoirs et l'acceptation des sciences. Dans des contextes suisses et européens, cet ouvrage s'intéresse aux manières dont les sciences et les technologies sont fabriquées, en analysant leurs institutions et les pratiques. A partir d'une approche relationnelle, les sciences et les technologies sont conçues comme des phénomènes profondément sociaux, culturels et politiques. Une telle démarche déstabilise les visions parfois idéalisées et stéréotypées de la construction des savoirs. Des études de cas détaillées décrivent des phénomè...

  14. Effets des extraits vegetaux sur la dynamique de populations des ...

    African Journals Online (AJOL)

    La présente étude se propose de trouver une alternative de l'utilisation des pesticides chimiques en testant l'effet insecticide des extraits aqueux des feuilles de Hyptis suaveolens, graines de Ricinus communis et de Azadirachta indica contre les ravageurs du niébé en conditions de champ en utilisant le cyperméthrine ...

  15. Which radiological investigations should be performed to identify fractures in suspected child abuse?

    International Nuclear Information System (INIS)

    Kemp, A.M.; Butler, A.; Morris, S.; Mann, M.; Kemp, K.W.; Rolfe, K.; Sibert, J.R.; Maguire, S.

    2006-01-01

    Aims: To determine which radiological investigations should be performed and which children should be investigated. Materials and methods: An all language literature search of original articles; from 1950-October 2005. Two reviewers independently reviewed each article. A third was carried out on disagreement. Each study was assessed using standardised data extraction, critical appraisal and evidence forms. Results: Thirty-four studies were included. Fifteen addressed the question: which investigation has a higher yield, skeletal surveys (SS) or bone scintigraphy (BS)? Studies gave conflicting results. Overall neither investigation is as good as the two combined. BS predominately missed skull, metaphyseal and epiphyseal fractures, whereas SS commonly missed rib fractures. Two studies showed that a repeat SS 2 weeks after the initial study provided significant additional information about tentative findings, the number and age of fractures. A comparative study evaluated additional oblique views of ribs in 73 children and showed improved diagnostic sensitivity, specificity and accuracy. Four studies addressed the diagnostic yield for occult fractures with respect to age. This was significant for children under 2-years old. Conclusions: In children under 2-years old, where physical abuse is suspected, diagnostic imaging of the skeleton should be mandatory. SS or BS alone is inadequate to identify all fractures. It is recommended that all SS should include oblique views of the ribs. This review suggests that the following options would optimize the diagnostic yield. However, each needs to be evaluated prospectively: SS that includes oblique views, SS and BS, a SS with repeat SS or selected images 2 weeks later or a BS plus skull radiography and coned views of metaphyses and epiphyses

  16. Which radiological investigations should be performed to identify fractures in suspected child abuse?

    Energy Technology Data Exchange (ETDEWEB)

    Kemp, A.M.; Butler, A.; Morris, S.; Mann, M.; Kemp, K.W.; Rolfe, K.; Sibert, J.R.; Maguire, S

    2006-09-15

    Aims: To determine which radiological investigations should be performed and which children should be investigated. Materials and methods: An all language literature search of original articles; from 1950-October 2005. Two reviewers independently reviewed each article. A third was carried out on disagreement. Each study was assessed using standardised data extraction, critical appraisal and evidence forms. Results: Thirty-four studies were included. Fifteen addressed the question: which investigation has a higher yield, skeletal surveys (SS) or bone scintigraphy (BS)? Studies gave conflicting results. Overall neither investigation is as good as the two combined. BS predominately missed skull, metaphyseal and epiphyseal fractures, whereas SS commonly missed rib fractures. Two studies showed that a repeat SS 2 weeks after the initial study provided significant additional information about tentative findings, the number and age of fractures. A comparative study evaluated additional oblique views of ribs in 73 children and showed improved diagnostic sensitivity, specificity and accuracy. Four studies addressed the diagnostic yield for occult fractures with respect to age. This was significant for children under 2-years old. Conclusions: In children under 2-years old, where physical abuse is suspected, diagnostic imaging of the skeleton should be mandatory. SS or BS alone is inadequate to identify all fractures. It is recommended that all SS should include oblique views of the ribs. This review suggests that the following options would optimize the diagnostic yield. However, each needs to be evaluated prospectively: SS that includes oblique views, SS and BS, a SS with repeat SS or selected images 2 weeks later or a BS plus skull radiography and coned views of metaphyses and epiphyses.

  17. Performance investigation of an innovative offset strip fin arrays in compact heat exchangers

    International Nuclear Information System (INIS)

    Peng, Hao; Ling, Xiang; Li, Juan

    2014-01-01

    Highlights: • The effect of fin pitch, length and bending distance on thermal performance were presented. • The corresponding Re C values at the j and f slope changes are in the range of 2000–2100. • The numerical results showed a good agreement with the experimental data. • Local high Nu values near the channel inlet, decreasing through the flow directions. - Abstract: Experimental and numerical studies on the flow and heat transfer characteristics for an innovative offset strip fins compact heat exchangers were performed. First, five fin schemes were investigated with various air flow velocities and a constant inlet steam pressure by experiments. The Reynolds number ranged from 500 to 5000 at the air side. The experimental results indicated that the fin pitch (P f ), fin length (L f ) and fin bending distance (C f ) have a significant influence on thermal performance of fins. The Colburn factor j, friction factor f and ‘point of transition’ were calculated from the experimental data. Then, the thermal–hydraulic performances of the novel offset strip fins were analyzed numerically. The simulation results obtained are in agreement with experimental data. Based on these simulations, the maximum values for local Nu number are at the channel inlet which is due to the thermal entrance effect. The longitudinal vortexes near the fin region will increase velocity gradient and reduce the thickness of boundary layer to improve heat transfer. The main conclusion draws from this work will be helpful for future development and design of a high-efficiency heat exchangers involving offset strip fin structures

  18. Investigating the quality of video consultations performed using fourth generation (4G) mobile telecommunications.

    Science.gov (United States)

    Caffery, Liam J; Smith, Anthony C

    2015-09-01

    The use of fourth-generation (4G) mobile telecommunications to provide real-time video consultations were investigated in this study with the aims of determining if 4G is a suitable telecommunications technology; and secondly, to identify if variation in perceived audio and video quality were due to underlying network performance. Three patient end-points that used 4G Internet connections were evaluated. Consulting clinicians recorded their perception of audio and video quality using the International Telecommunications Union scales during clinics with these patient end-points. These scores were used to calculate a mean opinion score (MOS). The network performance metrics were obtained for each session and the relationships between these metrics and the session's quality scores were tested. Clinicians scored the quality of 50 hours of video consultations, involving 36 clinic sessions. The MOS for audio was 4.1 ± 0.62 and the MOS for video was 4.4 ± 0.22. Image impairment and effort to listen were also rated favourably. There was no correlation between audio or video quality and the network metrics of packet loss or jitter. These findings suggest that 4G networks are an appropriate telecommunication technology to deliver real-time video consultations. Variations in quality scores observed during this study were not explained by the packet loss and jitter in the underlying network. Before establishing a telemedicine service, the performance of the 4G network should be assessed at the location of the proposed service. This is due to known variability in performance of 4G networks. © The Author(s) 2015.

  19. Numerical Investigations on the Aerodynamic Performance of Wind Turbine:Downwind Versus Upwind Configuration

    Institute of Scientific and Technical Information of China (English)

    Hu Zhou; Decheng Wan

    2015-01-01

    Although the upwind configuration is more popular in the field of wind energy, the downwind one is a promising type for the offshore wind energy due to its special advantages. Different configurations have different aerodynamic performance and it is important to predict the performance of both downwind and upwind configurations accurately for designing and developing more reliable wind turbines. In this paper, a numerical investigation on the aerodynamic performance of National Renewable Energy Laboratory (NREL) phase VI wind turbine in downwind and upwind configurations is presented. The open source toolbox OpenFOAM coupled with arbitrary mesh interface (AMI) method is applied to tackle rotating problems of wind turbines. Two 3D numerical models of NREL phase VI wind turbine with downwind and upwind configurations under four typical working conditions of incoming wind velocities are set up for the study of different unsteady characteristics of the downwind and upwind configurations, respectively. Numerical results of wake vortex structure, time histories of thrust, pressure distribution on the blade and limiting streamlines which can be used to identify points of separation in a 3D flow are presented. It can be concluded that thrust reduction due to blade-tower interaction is small for upwind wind turbines but relatively large for downwind wind turbines and attention should be paid to the vibration at a certain frequency induced by the cyclic reduction for both configurations. The results and conclusions are helpful to analyze the different aerodynamic performance of wind turbines between downwind and upwind configurations, providing useful references for practical design of wind turbine.

  20. Supplementary investigations on the validation of the atmospheric radionuclide transport model (ARTM); Ergaenzende Untersuchungen zur Validierung des Atmosphaerischen Radionuklid-Transport-Modells (ARTM)

    Energy Technology Data Exchange (ETDEWEB)

    Richter, Cornelia; Thielen, Harald; Sogalla, Martin

    2015-09-15

    In the medium-term time scale the Gaussian plume model used so far for atmospheric dispersion calculations in the General Administrative Provision (AVV) relating to Section 47 of the Radiation Protection Ordinance (StrISchV) as well as in the Incident Calculation Bases (SBG) relating to Section 49 StrISchV is to be replaced by a Lagrangian particle model. Meanwhile the Atmospheric Radionuclide Transportation Model (ARTM) is available, which allows the simulation of the atmospheric dispersion of operational releases from nuclear installations. ARTM is based on the program package AUSTAL2000 which is designed for the simulation of atmospheric dispersion of non-radioactive operational releases from industrial plants and was adapted to the application of airborne radioactive releases. The research project 3612S50007 serves, on the one hand, to validate ARTM systematically. On the other hand, the development of science and technology were investigated and, if reasonable and possible, were implemented to the program system. The dispersion model and the user interface were advanced and optimized. The program package was provided to the users as a free download. Notably t he work program comprises the validation of the approach used in ARTM to model short emission periods, which are of interest in view of the SBG. The simulation results of the diagnostic wind and turbulence model TALdia, which is part of the GO-ARTM program package, were evaluated with focus on the influence of buildings on the flow field. The user interface was upgraded with a wind field viewer. To simplify the comparison with the model still in use, a Gaussian plum e model was implemented into the graphical user interface. The ARTM web page was maintained, user questions and feedback were answered and analysed concerning possible improvements and further developments of the program package. Numerous improvements were implemented. An ARTM user workshop was hosted by the Federal Office for Radiation

  1. Investigating the effects of intellectual capital on organizational performance measurement through organizational learning capabilities

    Directory of Open Access Journals (Sweden)

    Nabi ollah Nejatizadeh

    2013-01-01

    Full Text Available During the past few years, there have been growing interests on intellectual capital due to industrial changes on the market. Thus, identifying different ways to create, manage, and evaluate the impact of intellectual capital has remained an open area of research. One of the most important organizational capabilities, which could help organizations create and share knowledge is to effectively use knowledge to create competitive advantage. The primary objective of this study is to investigate the effects of intellectual capital on other components and their impacts on organizational learning capability. The statistical population includes 500 employees of an Iranian organization. The study uses a sample size including 273 people using Morgan statistical table and Cronbach's alpha is calculated as 0.838. The results of this survey indicate that human capital, relational capital and learning capabilities have positive impact on organizational performance. In addition, relational capital positively impacts learning capability and human capital influences positively on relational capital.

  2. Investigating User Perception of High-Performance Schools about Factors Associated with Building Energy Efficiency

    Directory of Open Access Journals (Sweden)

    Mohd Najib Mohd Salleh

    2016-01-01

    Full Text Available Energy demand in buildings can be reduced by improving energy efficiency. MS1525 has recommended that energy efficiency for Non-Residential Buildings in Malaysia to be not more than 135kWh/m²/year. A school building is a non-residential building and has major social responsibilities. Based on the theory of building energy-efficiency, energy efficiency can be achieved through three main factors: a design of buildings; b design of services; and c user behavior. This study aims to investigate the user perceptions in High-Performance Schools. The questionnaire viewed three main perceptions of users: perception of user behavior, the perception of building design and perception of services design.

  3. Investigation on the performance of polymer zirconium compound (PZC) for chromatographic Tc-99m generator preparation

    International Nuclear Information System (INIS)

    Le Van So

    2004-01-01

    The performance of PZC was investigated for chromatographic Tc-99m generator preparation. Mo-adsorption of PZC in different Mo-solutions and Tc-99m elution of 99 Mo-PZC column were studied. Mo- adsorption capacity of higher than 250mgMo/gPZC and Tc-99m elution yield of higher than 80% were achieved with PZC adsorbent. Mo-99 breakthrough of 0.02% and Molybdenum element breakthrough of around 5μg Mo/ml were found in Tc-99m eluate. A good relationship between the Mo-content of adsorption solution and the Mo-adsorption capacity, adsorption percentage, Mo-breakthrough and Tc-99m elution yield was found. The preparation of PZC based Tc-99m chromatographic generator with 4 gram weight of PZC was successfully conducted. (author)

  4. Intraindividual variability across cognitive domains: investigation of dispersion levels and performance profiles in older adults.

    Science.gov (United States)

    Hilborn, Jennifer V; Strauss, Esther; Hultsch, David F; Hunter, Michael A

    2009-05-01

    A growing body of research suggests that substantial variability exists among cognitive abilities within individuals. This within-person variability across cognitive domains is termed dispersion. The present study investigated the relationship between aging and dispersion of cognitive functions both quantitatively (overall levels of dispersion) and qualitatively (patterns of dispersion) in a sample of 304 nondemented, older adults aged 64 to 92 years (M = 74.02). Quantitatively, higher levels of dispersion were observed in the old-old adults (aged 75-92 years) and those identified as having experienced cognitive decline, suggesting that dispersion level may serve as a marker of cognitive integrity. Qualitatively, three distinct dispersion profiles were identified through clustering methods, and these were found to be related to demographic, health, and performance characteristics of the individuals, suggesting that patterns of dispersion may be meaningful indicators of individual differences.

  5. Investigation of ambient temperature on the performance of GE-F5 gas turbine

    International Nuclear Information System (INIS)

    Ghazikhani, M.; Taffazoli, D.; Manshori, N.

    2002-01-01

    The role of ambient temperature in determining the performance of GE-F5 gas turbine is analysed by investigating the Shirvan gas turbine power plant 10 MW , 15 MW and 20 MW power output. These parameters have been brought as a function of ambient temperature. The results show when ambient temperature increases 1 deg C, The compressor pressure decreases about 20 k Pa, compressor outlet temperature increases about 1.13 deg C and exhaust temperature increases about 2.5 deg C. It is revealed that variations are due to decreasing the efficiency of compressor and less due to mass flow rate of air reduction as ambient temperature increases at constant power output. The results shows cycle efficiency reduces 3% with increasing 50 of ambient temperature, also the m increases as ambient temperature increase for constant turbine work. These are also because of reducing the compressor efficiency as ambient temperature increases

  6. Indoor tests to investigate the effect of brine depth on the performance of solar still

    Energy Technology Data Exchange (ETDEWEB)

    Ali, Marwah A.W.; Jabbar N. Khalifa, Abdul [Nahrain University, College of Engineering, Jadiriya, P.O. Box 64040, Baghdad (Iraq)

    2013-07-01

    Many experimental and numerical studies have been done on different configurations of solar stills to optimize the design by examining the effect of climatic, operational and design parameters on its performance. One of the most important of the operational parameters that has received a considerable attention in the literature is the brine depth. This paper reports indoor experimental investigations on the effect of brine depth on the productivity and efficiency of the solar stills at four different brine depths of 1.5, 2, 4 and 5.5 cm. Indoor tests were used by simulating the solar input by proper electric heaters located at the bottom of the still for heating the water contained in the basin of the still. The present study validated the decreasing trend in productivity with the increase of brine depth and showed that the still productivity could be influenced by the brine depth by up to 24%.

  7. Investigation of high-alpha lateral-directional control power requirements for high-performance aircraft

    Science.gov (United States)

    Foster, John V.; Ross, Holly M.; Ashley, Patrick A.

    1993-01-01

    Designers of the next-generation fighter and attack airplanes are faced with the requirements of good high angle-of-attack maneuverability as well as efficient high speed cruise capability with low radar cross section (RCS) characteristics. As a result, they are challenged with the task of making critical design trades to achieve the desired levels of maneuverability and performance. This task has highlighted the need for comprehensive, flight-validated lateral-directional control power design guidelines for high angles of attack. A joint NASA/U.S. Navy study has been initiated to address this need and to investigate the complex flight dynamics characteristics and controls requirements for high angle-of-attack lateral-directional maneuvering. A multi-year research program is underway which includes groundbased piloted simulation and flight validation. This paper will give a status update of this program that will include a program overview, description of test methodology and preliminary results.

  8. Investigation of the Stage Performance and Flow Fields in a Centrifugal Compressor with a Vaneless Diffuser

    Directory of Open Access Journals (Sweden)

    Ahti Jaatinen-Värri

    2014-01-01

    Full Text Available The effect of the width of the vaneless diffuser on the stage performance and flow fields of a centrifugal compressor is studied numerically and experimentally. The diffuser width is varied by reducing the diffuser flow area from the shroud side (i.e., pinching the diffuser. Seven different diffuser widths are studied with numerical simulation. In the modeling, the diffuser width b/b2 is varied within the range 1.00 to 0.50. The numerical results are compared with results obtained in previous studies. In addition, two of the diffusers are further investigated with experimental measurement. The main finding of the work is that the pinch reduces losses in the impeller associated with the tip-clearance flow. Furthermore, it is shown that a too large width reduction causes the flow to accelerate excessively, resulting in a highly nonuniform flow field and flow separation near the shroud.

  9. An experimental investigation of performance of a double pass solar air heater with thermal storage medium

    Directory of Open Access Journals (Sweden)

    Ali Hafiz Muhammad

    2015-01-01

    Full Text Available The performance of a double pass solar air heater was experimentally investigated using four different configurations. First configuration contained only absorber plate whereas copper tubes filled with thermal storage medium (paraffin wax were added on the absorber plate in the second configuration. Aluminum and steel rods as thermal enhancer were inserted in the middle of paraffin wax of each tube for configurations three and four respectively. Second configuration provided useful heat for about 1.5 hours after the sunset compared to first configuration. Configurations three and four provided useful heat for about 2 hours after the sunset. The maximum efficiency of about 96% was achieved using configuration three (i.e. using Aluminum rods in the middle of copper tubes filled with paraffin wax.

  10. Investigation of thermodynamic performances for two solar-biomass hybrid combined cycle power generation systems

    International Nuclear Information System (INIS)

    Liu, Qibin; Bai, Zhang; Wang, Xiaohe; Lei, Jing; Jin, Hongguang

    2016-01-01

    Highlights: • Two solar-biomass hybrid combined cycle power generation systems are proposed. • The characters of the two proposed systems are compared. • The on-design and off-design properties of the system are numerically investigated. • The favorable performances of thermochemical hybrid routine are validated. - Abstract: Two solar-biomass hybrid combined cycle power generation systems are proposed in this work. The first system employs the thermochemical hybrid routine, in which the biomass gasification is driven by the concentrated solar energy, and the gasified syngas as a solar fuel is utilized in a combined cycle for generating power. The second system adopts the thermal integration concept, and the solar energy is directly used to heat the compressed air in the topping Brayton cycle. The thermodynamic performances of the developed systems are investigated under the on-design and off-design conditions. The advantages of the hybrid utilization technical mode are demonstrated. The solar energy can be converted and stored into the chemical fuel by the solar-biomass gasification, with the net solar-to-fuel efficiency of 61.23% and the net solar share of 19.01% under the specific gasification temperature of 1150 K. Meanwhile, the proposed system with the solar thermochemical routine shows more favorable behaviors, the annual system overall energy efficiency and the solar-to-electric efficiency reach to 29.36% and 18.49%, while the with thermal integration concept of 28.03% and 15.13%, respectively. The comparison work introduces a promising approach for the efficient utilization of the abundant solar and biomass resources in the western China, and realizes the mitigation of CO_2 emission.

  11. Investigation of combustion and thermodynamic performance of a lean burn catalytic combustion gas turbine system

    International Nuclear Information System (INIS)

    Yin Juan; Weng Yiwu

    2011-01-01

    The goals of this research were to investigate the combustion and thermodynamic performance of a lean burn catalytic combustion gas turbine. The characteristics of lean burn catalytic combustion were investigated by utilising 1D heterogeneous plug flow model which was validated by experiments. The effects of operating parameters on catalytic combustion were numerically analysed. The system models were built in ASPEN Plus and three independent design variables, i.e. compressor pressure ratio (PR), regenerator effectiveness (RE) and turbine inlet temperature (TIT) were selected to analyse the thermodynamic performance of the thermal cycle. The main results show that: simulations from 1D heterogeneous plug flow model can capture the trend of catalytic combustion and describe the behavior of the catalytic monolith in detail. Inlet temperature is the most significant parameter that impacts operation of the catalytic combustor. When TIT and RE are constant, the increase of PR results in lowering the inlet temperature of the catalytic combustor, which results in decreasing methane conversion. The peak thermal efficiency and the optimal PR at a constant TIT increase with the increase of TIT; and at the constant PR, the thermal efficiency increases with the increase of TIT. However, with lower TIT conditions, the optimal PR and the peak efficiency at a constant TIT of the LBCCGT cycle are relative low to that of the conventional cycle. When TIT and PR are constant, the decrease of RE may result in lower methane conversion. The influences of RE on the methane conversion and the thermal efficiency are more significant at higher PRs. The higher thermal efficiency for the lower RE is achieved at lower PR.

  12. Design and study of the performance of a Raman lidar model, combining a pulsed laser source and a holographic grating double monochromator; Realisation et etudes des performances d'une maquette de lidar Raman combinant une source laser impulsionnelle et un double monochromateur a reseaux holographiques

    Energy Technology Data Exchange (ETDEWEB)

    Nacass, Philippe

    1976-03-16

    The various techniques for the analysis of air constituents are studied briefly to help design an apparatus for detecting, localizing, identifying and measuring atmospheric pollution. The optical methods known under the name of Lidar (Light direction and ranging) appear to give good qualitative and quantitative results since they do not involve any sampling of the observed medium. Amongst these methods, the Raman laser back-scattering in which the characteristic frequency of a molecule can be isolated from those of the other constituents of air is studied in more details. The design and realization, based on the conclusions of this study, and the measurements of the performance of a Raman Lidar preliminary model are then described. Its originality lies in the use of holographic grating monochromators and the overall simplicity of operation of the system. Using this system, it was possible to make in-situ Raman back-scattering measurements on N{sub 2}, O{sub 2}, H{sub 2}O in the atmosphere and on large concentrations of CO{sub 2} at distances between 30 and 40 m, which give a reasonable estimate of the sensitivity and of the range of a full scale, more performing final design. (author) [French] En vue de la realisation d'un dispositif permettant la detection, la localisation, l'identification et le dosage a distance de la pollution atmospherique, les differentes techniques d'analyse des constituants de l'air sont etudiees rapidement. Les methodes optiques appelees Lidar (Light Detection And Ranging) paraissent les plus adaptees pour des mesures qualitatives et quantitatives, car elles ne necessitent pas de prelevement du milieu observe. Parmi ces methodes, la retrodiffusion Raman Laser, qui permet d'isoler la frequence propre caracteristique d'une molecule sans interference avec les autres constituants de l'air est etudiee plus en details. La realisation, basee sur les conclusions de cette etude, puis la mesure des performances d'une maquette preliminaire de Lidar

  13. Charte du Conseil des Gouverneurs

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    7. favoriser des communications ouvertes et franches entre le personnel, la direction ..... de dresser le procès-verbal des réunions du Conseil et de ses comités et de veiller à ce ... et des résultats qu'il obtient, et non de sa gestion quotidienne.

  14. Investigations on the tensile strength of high performance concrete incorporating silica fume

    International Nuclear Information System (INIS)

    Santanu Bhanja; Bratish Sengupta

    2005-01-01

    Though the literature is rich in reporting on silica fume concrete the technical data on tensile strength is quite limited. The present paper is directed towards developing a better understanding on the isolated contribution of silica fume on the tensile strengths of High Performance Concrete. Extensive experimentation was carried out over water-binder ratios ranging from 0.26 to 0.42 and silica fume binder ratios from 0.0 to 0.3. For all the mixes compressive, flexural and split tensile strengths were determined at 28 days. The results of the present investigation indicate that silica fume incorporation results in significant improvements in the tensile strengths of concrete. It is also observed that the optimum replacement percentage, which led to maximization of strength, is not a constant one but depends on the water- cementitious material ratio of the mix. Compared to split tensile strengths, flexural strengths have exhibited greater percentage gains in strength. Increase in split tensile strength beyond 15% silica fume replacement is almost insignificant whereas sizeable gains in flexural tensile strength have occurred even up to 25% replacements. For the present investigation transgranular failure of concrete was observed which indicate that silica fume incorporation results in significant improvements in the strength of both paste and transition zone. (authors)

  15. An investigation on the noise reduction performance of profiled rigid median barriers at highways

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Monazzam

    2012-01-01

    Full Text Available Median barriers as a portion of a divided highway are provided to minimize the cross-median crashes. Moreover, median barriers similar to roadside noise barriers could protect people from transportation noise. Thus, there is a need to investigate various median barrier models to identify changes of insertion loss over a simple rigid barrier. In order to estimate the acoustical influence of median barrier′s profile in the shadow zone, different median barrier models are presented and their insertion losses are calculated over a frequency range from 50 to 4000 Hz using a two-dimensional boundary element method. The present investigation has clearly revealed that among the profiled median barriers, T-shape, Y-shape, and L-shape provide better performance than that of the other shapes. It is also found that among inclined barriers, V-shape barrier significantly presents higher values of attenuation. Based on the calculation of different geometrics, it has been shown that a further 2 dB (A in efficiency could be obtained by a better design of the median barrier which is labeled model "L."

  16. Investigation of Forming Performance of Laminated Steel Sheets Using Finite Element Analyses

    International Nuclear Information System (INIS)

    Liu Wenning; Sun Xin; Ruokolainen, Robert; Gayden Xiaohong

    2007-01-01

    Laminated steel sheets have been used in automotive structures for reducing in-cabin noise. However, due to the marked difference in material properties of the different laminated layers, integrating laminated steel parts into the manufacturing processes can be challenging. Especially, the behavior of laminated sheets during forming processes is very different from that of monolithic steel sheets. During the deep-draw forming process, large shear deformation and corresponding high interfacial stress may initiate and propagate interfacial cracks between the core polymer and the metal skin, hence degrading the performance of the laminated sheets. In this paper, the formability of the laminated steel sheets is investigated by means of numerical analysis. The goal of this work is to gain insight into the relationship between the individual properties of the laminated sheet layers and the corresponding formability of the laminated sheet as a whole, eventually leading to reliable design and successful forming process development of such materials. Finite element analyses of laminate sheet forming are presented. Effects of polymer core thickness and viscoelastic properties of the polymer core, as well as punching velocity, are also investigated

  17. An investigation into the anti-releasing performance of a serrated bolt

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Jin Hwan; Lee, Hyun Kyu; Park, Ke Un; Kim, Jong Bong [Seoul Natinal University, Seoul (Korea, Republic of)

    2015-11-15

    As the sizes of electric products, such as mobile phones and watch phones, decrease, the joining bolt for the electric product should also be miniaturized. However, the miniature-sized bolt has to support sufficient joining torque and joining force. The bolt also has to support sufficient anti-releasing torque to keep the product fastened. We investigated a serrated bolt as a candidate for a miniature-sized fastener to increase the anti-release torque. In the serrated bolt, serration shapes are formed on the bottom surface of a bolt head to create an obstacle to releasing. In this study, finite element analyses were carried out on joining and releasing, and the anti-release torque was predicted. Through the joining and releasing analyses for various values of the elastic modulus and yield strength of the joined part, the effect of the mechanical properties of the joined part on the anti-releasing performance were investigated. The analysis results showed that a high strength insert nut is needed to increase the anti-releasing torque when the yield strength of the joined part is low, such as a plastic board in a mobile phone.

  18. Investigation of baffle configuration effect on the performance of exhaust mufflers

    Directory of Open Access Journals (Sweden)

    Ahmed Elsayed

    2017-09-01

    Full Text Available Using baffles in exhaust mufflers is known to improve their transmission loss. The baffle cut ratio should affect the muffler performance analogous to a shell-and-tube heat exchanger. To the authors’ knowledge, there is no previous assessment reported in literature of the effects that the baffle cut ratio configuration has on acoustic response and back pressure. This investigation presents a parametric study on the effect of baffle configuration on transmission loss and pressure drop predicted. The effect of (i the baffle cut ratio and baffle spacing, (ii the number of baffle holes, and (iii the hole distribution for their effect on transmission loss was investigated. Results show that decreasing the baffle cut ratio tends to increase the transmission loss at intermediate frequencies by up to 45%. Decreasing the spacing between muffler plates was shown to enhance the muffler transmission loss by 40%. To assess the baffle effect on flow, the OpenFoam CFD libraries were utilized using the thermal baffle approach model. Baffles were found to cause sudden drop in fluid temperature in axial flow direction. The outlet exhaust gases temperature was found to decrease by 15% as the baffle cut ratio changed from 75% to 25%.

  19. Numerical investigation of thermal-hydraulic performance of channel with protrusions by turbulent cross flow jet

    Science.gov (United States)

    Sahu, M. K.; Pandey, K. M.; Chatterjee, S.

    2018-05-01

    In this two dimensional numerical investigation, small rectangular channel with right angled triangular protrusions in the bottom wall of test section is considered. A slot nozzle is placed at the middle of top wall of channel which impinges air normal to the protruded surface. A duct flow and nozzle flow combined to form cross flow which is investigated for heat transfer enhancement of protruded channel. The governing equations for continuity, momentum, energy along with SST k-ω turbulence model are solved with finite volume based Computational fluid dynamics code ANSYS FLUENT 14.0. The range of duct Reynolds number considered for this analysis is 8357 to 51760. The ratios of pitch of protrusion to height of duct considered are 0.5, 0.64 and 0.82. The ratios of height of protrusion to height of duct considered are 0.14, 0.23 and 0.29. The effect of duct Reynolds number, pitch and height of protrusion on thermal-hydraulic performance is studied under cross flow condition. It is found that heat transfer rate is more at relatively larger pitch and small pressure drop is found in case of low height of protrusion.

  20. Investigation of anti-wear performance of automobile lubricants using thin layer activation analysis technique

    Energy Technology Data Exchange (ETDEWEB)

    Biswal, Jayashree [Isotope and Radiation Application Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Thakre, G.D. [Tribology and Combustion Division, Indian Institute of Petroleum, Dehradun 248005, Uttarakhand (India); Pant, H.J., E-mail: hjpant@barc.gov.in [Isotope and Radiation Application Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Samantray, J.S. [Isotope and Radiation Application Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Arya, P.K. [Tribology and Combustion Division, Indian Institute of Petroleum, Dehradun 248005, Uttarakhand (India); Sharma, S.C.; Gupta, A.K. [Nuclear Physics Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India)

    2017-05-15

    An investigation was carried out to examine the anti-wear behavior of automobile lubricants using thin layer activation analysis technique. For this study disc gears made of EN 31 steel were labeled with a small amount of radioactivity by irradiating with 13 MeV proton beam from a particle accelerator. Experiments on wear rate measurement of the gear were carried out by mounting the irradiated disc gear on a twin-disc tribometer under lubricated condition. The activity loss was monitored by using a NaI(Tl) scintillation detector integrated with a multichannel analyzer. The relative remnant activity was correlated with thickness loss by generating a calibration curve. The wear measurements were carried out for four different types of lubricants, named as, L1, L2, L3 and L4. At lower load L1 and L4 were found to exhibit better anti-wear properties than L2 and L3, whereas, L4 exhibited the best anti-wear performance behavior than other three lubricants at all the loads and speeds investigated.

  1. Environmental Restoration Program pollution prevention performance measures for FY 1993 and 1994 remedial investigations

    International Nuclear Information System (INIS)

    1993-03-01

    The Martin Marietta Energy Systems, Inc., Environmental Restoration (ER) Program adopted a Pollution Prevention Program in March 1991. The program's mission is to minimize waste and prevent pollution in remedial investigations (RI), feasibility studies (FS), decontamination and decommissioning (D ampersand D), and surveillance and maintenance (S ampersand M) site program activities. Mission success will result in volume and/or toxicity reduction of generated waste. Energy Systems is producing a fully developed a Numerical Scoring System (NSS) and actually scoring the generators of Investigation Derived Waste (IDW) at six ER sites: Oak Ridge National Laboratory (ORNL), the Oak Ridge Y-12 Plant, the Oak Ridge K-25 site, Paducah Gaseous Diffusion Plant (Paducah), and Portsmouth Uranium Enrichment Complex (Portsmouth). This report summarizes the findings of this initial numerical scoring evaluation and shows where improvements in the overall ER Pollution prevention program may be required. This report identifies a number of recommendations that, if implemented, would help to improve site-performance measures. The continued development of the NSS will support generators in maximizing their Pollution Prevention/Waste Minimization efforts. Further refinements of the NSS, as applicable suggest comments and/or recommendations for improvement

  2. Investigation of tool engagement and cutting performance in machining a pocket

    Science.gov (United States)

    Adesta, E. Y. T.; Hamidon, R.; Riza, M.; Alrashidi, R. F. F. A.; Alazemi, A. F. F. S.

    2018-01-01

    This study investigates the variation of tool engagement for different profile of cutting. In addition, behavior of cutting force and cutting temperature for different tool engagements for machining a pocket also been explored. Initially, simple tool engagement models were developed for peripheral and slot cutting for different types of corner. Based on these models, the tool engagements for contour and zig zag tool path strategies for a rectangular shape pocket with dimension 80 mm x 60 mm were analyzed. Experiments were conducted to investigate the effect of tool engagements on cutting force and cutting temperature for the machining of a pocket of AISI H13 material. The cutting parameters used were 150m/min cutting speed, 0.05mm/tooth feed, and 0.1mm depth of cut. Based on the results obtained, the changes of cutting force and cutting temperature performance there exist a relationship between cutting force, cutting temperature and tool engagement. A higher cutting force and cutting temperature is obtained when the cutting tool goes through up milling and when the cutting tool makes a full engagement with the workpiece.

  3. Experimental investigation of the performance characteristics of a counterflow wet cooling tower

    International Nuclear Information System (INIS)

    Lemouari, M.; Boumaza, M.

    2010-01-01

    An experimental investigation of the performance characteristics of a counter flow wet cooling tower represented by the heat rejected by the tower and its thermal effectiveness is presented in this paper. The tower is filled with a 'VGA.' (Vertical Grid Apparatus) type packing which is 0.42 m high and contains four (04) galvanized sheets having a zigzag form, between which are disposed three (03) metallic vertical grids in parallel with a cross-sectional test area of 0.15 m - 0.148 m. The investigation is concerned mainly on the effect of the air, water flow rates and the inlet water temperatures on the thermal effectiveness of the cooling tower as well as the heat rejected by this tower from water to be cooled to the air stream discharged into the atmosphere. The two operating regimes which were observed during the air/water contact inside the tower, a Pellicular Regime (PR) and a Bubble and Dispersion Regime (BDR) appear to be important, as The BDR regime enables to cool larger amount of water flow rates, while the Pellicular regime results with higher thermal effectiveness. (authors)

  4. An investigation of material properties and tribological performance of magnetron sputtered thin film coatings

    Science.gov (United States)

    Singh, Harpal

    This dissertation is divided into two categories based upon lubrication functionality and its application. The categories are: Dry film lubrication and Fluid film lubrication with thin film coatings. Thin film coatings examined in this work were deposited using closed field unbalanced magnetron sputtering and RF-DC coupled magnetron sputtering systems. In Dry/Solid film lubrication, the mechanical, structural and tribological properties of two Molybdenum disulphide (MoS2) based coatings are examined and evaluated. Among the two coatings, one coating is doped with Ti (Ti-MoS2) and the other is a combination of metal, lubricant and oxide (Sb2O3/Au - MoS2). These coatings are known to provide low friction in vacuum environments. The goal of this work was to evaluate friction and wear performance of MoS2 doped coatings in unidirectional and reciprocating sliding contact under different environmental conditions. Sliding contact results showed friction and wear dependence on temperature and humidity. The formation and removal of transfer films and the recrystallization and reorientation of basal layers on the steel counterface was observed as the mechanism for low friction. Structural analysis revealed a relationship between the microstructural properties and tribological performance. It was also observed that the addition of dopants (Ti, Au, Sb 2O3) improved the mechanical properties as compared to pure MoS2 coatings. Further, the rolling contact performance of the coatings was measured on a five ball on rod tribometer and a Thrust bearing tribometer under vacuum and air environments. The rolling contact experiments indicated that life of the rolling components depend on the amount of material present between the contacts. Fluid film lubrication with thin film coatings investigates the possibilities to improve the performance and durability of tribological components when oils and thin films are synergistically coupled. In this work, the ability of a Diamond Like Carbon

  5. Do screencasts help to revise prerequisite mathematics? An investigation of student performance and perception

    Science.gov (United States)

    Loch, Birgit; Jordan, Camilla R.; Lowe, Tim W.; Mestel, Ben D.

    2014-02-01

    Basic calculus skills that are prerequisites for advanced mathematical studies continue to be a problem for a significant proportion of higher education students. While there are many types of revision material that could be offered to students, in this paper we investigate whether short, narrated video recordings of mathematical explanations (screencasts) are a useful tool to enhance student learning when revisiting prerequisite topics. We report on the outcomes of a study that was designed to both measure change in student performance before and after watching screencasts, and to capture students' perception of the usefulness of screencasts in their learning. Volunteers were recruited from students enrolled on an entry module for the Mathematics Master of Science programme at the Open University to watch two screencasts sandwiched between two online calculus quizzes. A statistical analysis of student responses to the quizzes shows that screencasts can have a positive effect on student performance. Further analysis of student feedback shows that student confidence was increased by watching the screencasts. Student views on the value of screencasts for their learning indicated that they appreciated being able to watch a problem being solved and explained by an experienced mathematician; hear the motivation for a particular problem-solving approach; engage more readily with the material being presented, thereby retaining it more easily. The positive student views and impact on student scores indicate that short screencasts could play a useful role in revising prerequisite mathematics.

  6. Combining EEG, MIDI, and motion capture techniques for investigating musical performance.

    Science.gov (United States)

    Maidhof, Clemens; Kästner, Torsten; Makkonen, Tommi

    2014-03-01

    This article describes a setup for the simultaneous recording of electrophysiological data (EEG), musical data (MIDI), and three-dimensional movement data. Previously, each of these three different kinds of measurements, conducted sequentially, has been proven to provide important information about different aspects of music performance as an example of a demanding multisensory motor skill. With the method described here, it is possible to record brain-related activity and movement data simultaneously, with accurate timing resolution and at relatively low costs. EEG and MIDI data were synchronized with a modified version of the FTAP software, sending synchronization signals to the EEG recording device simultaneously with keypress events. Similarly, a motion capture system sent synchronization signals simultaneously with each recorded frame. The setup can be used for studies investigating cognitive and motor processes during music performance and music-like tasks--for example, in the domains of motor control, learning, music therapy, or musical emotions. Thus, this setup offers a promising possibility of a more behaviorally driven analysis of brain activity.

  7. Glass sample preparation and performance investigations. [solar x-ray imager

    Science.gov (United States)

    Johnson, R. Barry

    1992-01-01

    This final report details the work performed under this delivery order from April 1991 through April 1992. The currently available capabilities for integrated optical performance modeling at MSFC for large and complex systems such as AXAF were investigated. The Integrated Structural Modeling (ISM) program developed by Boeing for the U.S. Air Force was obtained and installed on two DECstations 5000 at MSFC. The structural, thermal and optical analysis programs available in ISM were evaluated. As part of the optomechanical engineering activities, technical support was provided in the design of support structure, mirror assembly, filter wheel assembly and material selection for the Solar X-ray Imager (SXI) program. As part of the fabrication activities, a large number of zerodur glass samples were prepared in different sizes and shapes for acid etching, coating and polishing experiments to characterize the subsurface damage and stresses produced by the grinding and polishing operations. Various optical components for AXAF video microscope and the x-ray test facility were also fabricated. A number of glass fabrication and test instruments such as a scatter plate interferometer, a gravity feed saw and some phenolic cutting blades were fabricated, integrated and tested.

  8. Investigation of the effect of different refrigerants on performances of binary geothermal power plants

    International Nuclear Information System (INIS)

    Basaran, Anil; Ozgener, Leyla

    2013-01-01

    Highlights: • Working fluid selection plays a key role on binary cycle performance. • Selected refrigerants were analyzed in the sample cycle under the same working conditions. • Energy and exergy efficiencies of binary cycle were calculated for 8 refrigerants. - Abstract: The paper tries to review the argument of the use of working fluids for binary cycle power plants and has been dedicated to this specific argument with a more general perspective. Binary cycle that allows the production of electricity from geothermal energy sources is one of these systems. In this cycle, thermal energy obtained from geothermal sources is transferred to second working fluid. Therefore, selection of second working fluid plays a key role on the cycle performance. In this study, a sample geothermal binary power cycle was modeled and 12 refrigerants that are HFC, HC, and zoetrope refrigerant mixtures were selected as working fluid. Energy and exergy efficiencies of binary cycle were calculated for 12 refrigerants. Dry type fluids of investigated refrigerants R 236ea, R 600, R 600a, and R 227ea showed higher energy and exergy efficiencies, respectively. On the other hand, R 143a, R 415A, R 290, and R 413A that are wet fluids indicated lower energy and exergy efficiencies, respectively

  9. Investigation of Stratified Thermal Storage Tank Performance for Heating and Cooling Applications

    Directory of Open Access Journals (Sweden)

    Azharul Karim

    2018-04-01

    Full Text Available A large amount of energy is consumed by heating and cooling systems to provide comfort conditions for commercial building occupants, which generally contribute to peak electricity demands. Thermal storage tanks in HVAC systems, which store heating/cooling energy in the off-peak period for use in the peak period, can be used to offset peak time energy demand. In this study, a theoretical investigation on stratified thermal storage systems is performed to determine the factors that significantly influence the thermal performance of these systems for both heating and cooling applications. Five fully-insulated storage tank geometries, using water as the storage medium, were simulated to determine the effects of water inlet velocity, tank aspect ratio and temperature difference between charging (inlet and the tank water on mixing and thermocline formation. Results indicate that thermal stratification enhances with increased temperature difference, lower inlet velocities and higher aspect ratios. It was also found that mixing increased by 303% when the temperature difference between the tank and inlet water was reduced from 80 °C to 10 °C, while decreasing the aspect ratio from 3.8 to 1.0 increased mixing by 143%. On the other hand, increasing the inlet water velocity significantly increased the storage mixing. A new theoretical relationship between the inlet water velocity and thermocline formation has been developed. It was also found that inlet flow rates can be increased, without increasing the mixing, after the formation of the thermocline.

  10. Investigation of prostaglandin levels in human milk after high performance liquid chromatography purification

    International Nuclear Information System (INIS)

    Wu-Wang, C.Y.; Neu, J.

    1986-01-01

    This study was conducted to investigate five prostaglandins (PGs), i.e. PGE 2 , PGF/sub 2α/, 13-14-dihydro-15-keto-PGF/sub 2α/ (DHKF/sub 2α/), thromboxane B 2 (TXB 2 ) and 6-keto-PGF/sub 1α/), measured by (RIA) after C 18 Sep-Pak extraction and reverse phase high performance liquid chromatography (HPLC). Two trials were performed. In each trial, 3-5 mature human milk samples were pooled, acidified and extracted for PGs. The separation of PGs by HPLC was achieved by using an isocratic solvent system of acetonitrile/water (pH 3.0) (32/68, V/V). The PG levels from the two trials were determined and averaged after monitoring the recoveries. The results indicate that PGE 2 and DHKF/sub 2α/ are the two major PGs found in extracted human milk. However, after HPLC purification, no predominant PG is found and the levels of all the five PGs are much lower compared to the extracted sample. Since the immunoreactive material was also detected in HPLC fractions not within the PG peak, low levels of PG found in human milk after HPLC is likely due to the purification step removing the bulk of nonspecific immunoreactive substances present in the sample

  11. A numerical and experimental investigation of the thermal control performance of a spaceborne compressor assembly

    Science.gov (United States)

    Oh, Hyun-Ung; Lee, Min-Kyu; Shin, Somin; Hong, Joo-Sung

    2011-09-01

    Spaceborne pulse tube type cryocoolers are widely used for providing cryogenic temperatures for sensitive infrared, gamma-ray and X-ray detectors. Thermal control for the compressor of the cryocooler is one of the important technologies for the cooling performance, mission life time, and jitter stability of the cooler. The thermal design of the compressor assembly proposed in this study is basically composed of a heat pipe, a radiator, and a heater. In the present work, a method for heat pipe implementation is proposed and investigated to ensure the jitter stability of the compressor under the condition that one heat pipe is not working. An optimal design of the radiator that uses ribs for effective use by minimizing the temperature gradient on the radiator and reducing its weight is introduced. The effectiveness of the thermal design of the compressor assembly is demonstrated by on-orbit thermal analysis using the correlated thermal model obtained from the thermal balance test that is performed under a space simulating environment.

  12. Investigation of two-phase thermosyphon performance filled with modern HFC refrigerants

    Science.gov (United States)

    Gorecki, Grzegorz

    2018-02-01

    Two-phase closed thermosyphons (TPCTs) are widely utilized as heat exchanger elements in waste heat recovery systems and as passive heating/cooling devices. They are popular because of their high thermal conductivity, simple construction and reliability. Previous researches indicate that refrigerants are performing better than typical TPCT working fluids like deionized water or alcohols in the low temperature range. In the present study three HFC (Hydrofluorocarbons) refrigerants were tested: R134a, R404A and R407C. The total length of the investigated TPCT is 550 mm with equal length (245 mm) condenser and evaporator sections. Its outer diameter is 22 mm with 1 mm wall thickness. The evaporator section was heated by hot water with varying inlet temperature by 5 K step in the range of 288 K - 323 K. The condenser was cooled by cold water with inlet temperature kept at a constant value of 283 K. It was found that using R134a and R404A as working fluids heat transfer rates are the highest. For both refrigerants 10% is optimal filling ratio. They can be utilized interchangeably because the differences between their throughputs are within uncertainty bands. R407C performance was 50% lower. Other disadvantages of using this refrigerant are relatively high working pressures and higher optimal filling ratio (30%).

  13. Thermogravimetric investigation on the degradation properties and combustion performance of bio-oils.

    Science.gov (United States)

    Ren, Xueyong; Meng, Jiajia; Moore, Andrew M; Chang, Jianmin; Gou, Jinsheng; Park, Sunkyu

    2014-01-01

    The degradation properties and combustion performance of raw bio-oil, aged bio-oil, and bio-oil from torrefied wood were investigated through thermogravimetric analysis. A three-stage process was observed for the degradation of bio-oils, including devolatilization of the aqueous fraction and light compounds, transition of the heavy faction to solid, and combustion of carbonaceous residues. Pyrolysis kinetics parameters were calculated via the reaction order model and 3D-diffusion model, and combustion indexes were used to qualitatively evaluate the thermal profiles of tested bio-oils for comparison with commercial oils such as fuel oils. It was found that aged bio-oil was more thermally instable and produced more combustion-detrimental carbonaceous solid. Raw bio-oil and bio-oil from torrefied wood had comparable combustion performance to fuel oils. It was considered that bio-oil has a potential to be mixed with or totally replace the fuel oils in boilers. Copyright © 2013 Elsevier Ltd. All rights reserved.

  14. Investigation of the performance of EOTD for GSM users in telematics applications

    Science.gov (United States)

    Sharawi, Mohammad S.; Aloi, Daniel N.

    2003-08-01

    Location-based services have been standardized for incorporation into 3rd generation wireless communications as a result of the Federal Communications Commission"s (FCC) mandate on wireless carriers to provide automatic location information (ALI) during emergency911 calls. This mandate has driven the wireless carriers to explore terrestrial, satellite, and hybrid based location technology solutions. This paper presents a communications model that investigates the position accuracyof a Global Standard Mobile (GSM) phone employing the enhanced observed time difference (EOTD) location technology. The EOTD positioning technique requires the mobile station (MS) to detect signals from at least three base stations (BS). This studyassumes the three BSs are synchronized in time. For a given BS geometry with respect to the MS, a Monte Carlo simulation was performed to assess the two-dimensional position accuracyof the MS in Rayleigh and Ricean fading channels. In each channel, a Monte Carlo simulation was performed for a good and a bad BS-to-MS geometry. The paper concludes with a list of pros/cons of implementing EOTD as a location technologyenabler in telematics applications.

  15. Experimental Investigation of the Performance of a Hermetic Screw-Expander Organic Rankine Cycle

    Directory of Open Access Journals (Sweden)

    Sung-Wei Hsu

    2014-09-01

    Full Text Available In this study, the authors experimentally investigate the performance of the organic Rankine cycle (ORC and screw expander under the influence of supply pressure and pressure ratio over the expander. Three tests were performed with expander pressure ratios of 2.4–3.5, 3.0–4.6, and 3.3–6.1, which cover the over-expansion and under-expansion operating modes. The test results show a maximum expander isentropic efficiency of 72.4% and a relative cycle efficiency of 10.5% at an evaporation temperature of 101 °C and condensation temperature of 45 °C. At a given pressure ratio over the expander, a higher supply pressure to the expander causes a higher expander isentropic efficiency and higher cycle efficiency in the over-expansion mode. However, in the under-expansion mode, the higher supply pressure results in a lower expander isentropic efficiency and adversely affects the cycle efficiency. The results also show that under the condition of operation at a given pressure ratio, a higher supply pressure yields a larger power output owing to the increased mass flow rate at the higher supply pressure. The study results demonstrate that a screw-expander ORC can be operated with a wide range of heat sources and heat sinks with satisfactory cycle efficiency.

  16. Torque Ripple Minimization and Performance Investigation of an In-Wheel Permanent Magnet Motor

    Directory of Open Access Journals (Sweden)

    A. Mansouri

    2016-06-01

    Full Text Available Recently, electric vehicle motoring has become a topic of interest, due to the several problems caused by thermal engines such as pollution and high oil prices. Thus, electric motors are increasingly applied in vehicle’ applications and relevant research about these motors and their applications has been performed. Of particular interest are the improvements regarding torque production capability, the minimization of torque ripple and iron losses. The present work deals with the optimum design and the performance investigation of an outer rotor permanent magnet motor for in-wheel electric vehicle application. At first, and in order to find the optimum motor design, a new based particle-swarm multi-objective optimization procedure is applied. Three objective functions are used: efficiency maximization, weight and ripple torque minimization. Secondly, the effects of the permanent magnets segmentation, the stator slots opening, and the separation of adjacent magnets by air are outlined. The aim of the paper is the design of a topology with smooth output torque, low ripple torque, low iron losses and mechanical robustness.

  17. Investigating the Impact of Convergent vs. Divergent Assessment on ESL Students’ Anxiety and Test Performance

    Directory of Open Access Journals (Sweden)

    Azar Saeedi Nasab

    2014-05-01

    Full Text Available Language assessment with its eye-catching nature, casts its spell on many researchers, spurring on them to study its telling role in different arenas. The present study with a closer look to the realm, keeps one eye on two fresh approaches in assessment, namely convergent and divergent, and the other one on anxiety in a bid to slash its negative impact on students’ performance. The researchers resort to a correlational method with Ex Post Facto design, along with different tests, to forward the foregoing aim; discovering and appraising the degree of relationship stands between the two variables. Analyzing data gathered in this hybrid research on 55 young Iranian male and female students in two schools, located in United Arab Emirates (UAE, the researchers reaped findings which bore witness to the main proposed hypotheses, illustrating that divergent assessment (DA was more effective in reducing learners’ test anxiety level in comparison with convergent assessment (CA which, in turn, led up to better performance in the participants. Some implications for EFL teachers, to include the similar strategies in their lesson plan, offered at the very end which is followed by proposing some new horizons for further studies and investigations.

  18. Experimental investigations of the hydrogen addition effects on diesel engine performance

    Science.gov (United States)

    Mirica, I.; Pana, C.; Negurescu, N.; Cernat, A.; Nutu, C.

    2016-08-01

    In the global content regarding the impact on the environmental of the gases emissions resulted from the fossil fuels combustion, an interest aspect discussed on the 21st Session of the Conference of the Parties from the 2015 Paris Climate Conference and the gradual diminution of the worldwide oil reserves contribute to the necessity of searching of alternative energy from durable and renewable resources. At the use of hydrogen as addition in air to diesel engine, the level of CO, HC and smoke from the exhaust gases will decrease due to the improvement of the combustion process. At low and medium partial loads and low hydrogen energetic ratios used the NOX emission level can decrease comparative to classic diesel engine. The hydrogen use as fuel for diesel engine leads to the improving of the energetic and emissions performance of the engine due to combustion improvement and reduction of carbon content. The paper presents, in a comparative way, results of the experimental researches carried on a truck compression ignition engine fuelled with diesel fuel and with hydrogen diesel fuel and hydrogen as addition in air at different engine operation regimes. The results obtained during experimental investigations show better energetic and pollution performance of the engine fuelled with hydrogen as addition in air comparative to classic engine. The influences of hydrogen addition on engine operation are shown.

  19. Le statut vitaminique des individus et des populations…

    Directory of Open Access Journals (Sweden)

    Icart Jean-Claude

    2000-05-01

    Full Text Available Comme le souligne un récent rapport du Haut comité de santé publique, le statut vitaminique des individus et des populations demeure une question d’actualité. Si les études ne révèlent plus de signes évocateurs de carence, au plus des problèmes de déficiences pour certains groupes à risque, des interrogations, demeurent malgré le contexte d’abondance, concernant la couverture des besoins, laquelle pourrait s’avérer inférieure aux valeurs considérées comme satisfaisantes.

  20. Les lueurs des sables

    CERN Multimedia

    Les lueurs des sables

    2013-01-01

    Two CERN ladies are getting ready for the “Trophée Roses des Sables” rally adventure: Julie and Laetitia are finalizing the last details before setting off on Monday 7th October 2013. Julie from EN-MEF group and Laetitia from DGS-SEE group, met at the CERN Rugby club. This year, they are participating in the 100 % female rally which will take place in Morocco from 10 to 20 October. They will be carrying along 100 kg of humanitarian donation for children such as some clothes, books and medical material. Do not hesitate to show your support at their farewell party to be held on Monday 7 October, from 4 to 6 pm in front of the St Genis-Pouilly Mairie (city Hall). Follow their exciting adventure on the blog leslueursdessables.trophee-roses-des-sables.org and on their association’s Facebook page Les Lueurs des Sables.

  1. Liste des auteurs

    OpenAIRE

    2016-01-01

    Madeleine Akrich      Ecole des Mines – Centre de Sociologie de l’innovation – Paris Noël Barbe      Association comtoise des Arts et Traditions populaires – Besançon Lucien Bernot      Ecole des hautes études en sciences sociales (EHESS) – Paris Anni Borzeix      Centre national de la recherche scientifique (CNRS) –     Groupement d’intérêt public (GIP) « Mutations industrielles » – Paris François Boudarias      Laboratoire d’Anthropologie et de sociologie de Tours (LAST) Dominique Boullier ...

  2. Performance investigation of an advanced multi-effect adsorption desalination (MEAD) cycle

    KAUST Repository

    Thu, Kyaw

    2015-12-01

    This article presents the development of an advanced adsorption desalination system with quantum performance improvement. The proposed multi-effect adsorption desalination (MEAD) cycle utilizes a single heat source i.e., low-temperature hot water (as low as 55°C). Passive heating of the feed water (no direct heating) is adopted using total internal heat recovery from the kinetic energy of desorbed vapor and water vapor uptake potential of the adsorbent. Thus, the evaporation in the MEAD cycle ensues at low temperatures ranging from 35°C to 7°C yet providing significantly high performance ratio. The energy from the regenerated vapor is recovered for multiple evaporation/condensation of saline water by a water-run-around circuit between the top brine temperature (TBT) effect and the AD condenser. The adsorbent material is the hydrophilic mesoporous silica gel with high pore surface area. Numerical simulation for such a cycle is developed based on experimentally verified model extending to multi-effect cycle. The system is investigated under several operation conditions such as cycle time allocation, heat source temperature and the number of intermediate effects. It is observed that most of the evaporating-condensing effects operate at low temperature i.e., below 35°C as opposed to conventional multi-effect distillation (MED) cycle. For a MEAD cycle with 7 intermediate effects, the specific water production rate, the performance ratio and the gain output ratio are found to be 1.0m3/htonne of silica gel, 6.3 and 5.1, respectively. Low scaling and fouling potentials being evaporation at low temperatures yet high recovery ratio makes the cycle suitable for effectively and efficiently handling highly concentrated feed water such as produced water, brine rejected from other desalination plants and zero liquid discharge (ZLD) system. © 2015 Elsevier Ltd.

  3. Fit to Perform: An Investigation of Higher Education Music Students' Perceptions, Attitudes, and Behaviors toward Health.

    Science.gov (United States)

    Araújo, Liliana S; Wasley, David; Perkins, Rosie; Atkins, Louise; Redding, Emma; Ginsborg, Jane; Williamon, Aaron

    2017-01-01

    Making music at the highest international standards can be rewarding, but it is also challenging, with research highlighting pernicious ways in which practicing and performing can affect performers' health and wellbeing. Several studies indicate that music students' perceptions, attitudes, and behaviors toward health and healthy living are less than optimal, especially considering the multiple physical and psychological demands of their day-to-day work. This article presents the results of a comprehensive screening protocol that investigated lifestyle and health-related attitudes and behaviors among 483 undergraduate and postgraduate students (mean age = 21.29 years ± 3.64; 59% women) from ten conservatoires. The protocol included questionnaires measuring wellbeing, general health, health-promoting behaviors, perfectionism, coping, sleep quality, and fatigue. On each measure, the data were compared with existing published data from similar age groups. The results indicate that music students have higher levels of wellbeing and lower fatigue than comparable samples outside of music. However, they also reveal potentially harmful perceptions, attitudes, and behaviors toward health. Specifically, engagement in health responsibility and stress management was low, which along with high perfectionistic strivings, limited use of coping strategies, poor sleep quality, and low self-rated health, paints a troubling picture both for the music students and for those who support their training. The findings point to the need for more (and more effective) health education and promotion initiatives within music education; in particular, musicians should be better equipped with mental skills to cope with constant pressure to excel and high stress levels. In part, this calls for musicians themselves to engage in healthier lifestyles, take greater responsibility for their own health, and be aware of and act upon health information in order to achieve and sustain successful practice

  4. Numerical investigation of the performances of axial separation helical baffle heat exchangers

    International Nuclear Information System (INIS)

    Tang, Hongling; Chen, Yaping; Wu, Jiafeng; Yang, Shifan

    2016-01-01

    Highlights: • Seriation incline angles of axial separation reduce helical baffle manufacture cost. • Adjacent helical baffles are separated by sleeve tubes to form a greater pitch helix. • Flow and thermal performances of normal and axial separation schemes were simulated. • Deviation of h.t.c. or pressure drop of 21(15)° and 21° schemes is −1.21% or 4.96%. • Seriation step of baffle incline angles can be extended to 8° by axial separation. - Abstract: Axial separation is a novel baffle connection configuration of circumferential overlap helical baffle heat exchangers which makes baffle incline angle seriation possible. The adjacent baffle plates are separated by sleeve tubes to form a greater pitched helix for enhancing heat transfer under required pressure drop with the least number of molds for reducing baffle manufacture cost. Numerical simulations of flow and heat transfer performances were conducted and the calculation results were verified by the experimental ones. Performance investigation was conducted on eight normal trisection helical baffle schemes with baffle incline angles from 15° to 23° and five axial separation schemes of equivalent 17–22° angles using 15° baffles. In the calculation scope the average deviations of heat transfer coefficients and pressure drops of the normal helical schemes are respectively about −1.97% and −8.11% per 1° deviation of incline angle. The axial separation schemes using 15° baffles with equivalent 21° and 22° incline angles have deviation values of heat transfer coefficient 1.21% and 1.33% lower and pressure drop 4.96% and 5.55% higher respectively than those of the normal 21° and 22° incline angle schemes. By adopting axial separation approach the seriation step of baffle incline angles can be extended to 8°.

  5. Field investigation on consumer behavior and hydraulic performance of a district heating system in Tianjin, China

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Baoping; Fu, Lin; Di, Hongfa [Department of Building Science, Tsinghua University, Beijing 100084 (China)

    2009-02-15

    With the implementation of heat reforms in China, the application of thermostatic radiator valves (TRVs) has been gaining popularity in the new-style district heating systems (DHSs). The objective of this study was to investigate consumer behavior (including regulation of TRVs and opening of windows) and its influences on the hydraulic performance and energy consumption of individuals and the whole system. The concurrence rate of individual behaviors and hydraulic interactions between individuals were analyzed. This study should be helpful to gain a comprehensive understanding of the new DHSs in China and consider a proper design/control strategy for these systems. Questionnaires and field observations of consumer behavior, tests of hydraulic performance, and surveys of energy consumption were carried out in a DHS in Tianjin, which was one of the heat metering and billing demonstration projects in China. The main results of the tests were as follows: water flow performance in apartment-level heating systems were diverse because consumers' behavior was varied and unpredictable, and the hydraulic interaction between consumers living along the line of a vertical pipe was obvious, and was stronger for terminal consumers with their TRVs set to higher values; however, flow variations in the whole DHS, which included 910 households, were relatively constant. A probability analysis was carried out to explain this phenomenon, and the conclusion was drawn that when there were more than 200 consumers, the stochastic consumer regulation behavior would bring less than 10% of total flow variations. Finally, the power consumption of the circulation pump, heat consumption and energy-saving potential of this type of DHS were discussed and some suggestions for TRV regulation and pump operation were made. (author)

  6. Performance investigation of the Turkish geothermal district heating systems (GDHSs). Paper no. IGEC-1-066

    International Nuclear Information System (INIS)

    Ozgener, L.; Hepbasli, A.; Dincer, I.

    2005-01-01

    Various energy and exergy modeling techniques have been used by many investigators for energy-utilization assessments to minimize losses and maximize energy savings and hence financial savings. Furthermore, performance indices are employed to detect and to evaluate quantitatively the causes of the thermodynamic imperfection of the process under consideration such as exergy analysis. The present study evaluates the performances of the two geothermal district heating systems (GDHSs) installed in Turkey. The GDHSs considered are the Balcova GDHS in Izmir and Salihli GDHS in Manisa, while the exergetic improvement potential (ExIP) and specific exergy index (SExI) are used for the modeling of the entire systems and their essential components for performance evaluations and comparisons as well as possible energy and exergy efficiency improvements. The SExI is found to be 0.07 and 0.049 for the Balcova and Salihli GDHSs, respectively, representing that Balcova and Salihli geothermal fields fall into the medium and low quality geothermal resources according to the Lee's classification, respectively. The values for the ExIP are also obtained as follows: For the BGDHS with thirteen plate-type heat exchangers, fourth heat exchanger has the largest ExIP rate as 69.96 kW, followed by the first, second, and third heat exchangers at 20.07, 11.71, and 4.05 kW capacities, respectively, with the remaining ones under 3 kW, which does not present much potential for improvement. For the SGDHS, the ExIP rate is found to be 106.04 kW for the plate-type heat exchanger. On the other hand, in order to improve the system efficiency, water leaks in the distribution network should be prevented. (author)

  7. Do strong brands pay off? : An empirical investigation of the relation between brand asset valuator and financial performance

    NARCIS (Netherlands)

    Verbeeten, F.H.M.; Vijn, P.

    2006-01-01

    In this study, we investigate the relation between BrandAssetTM Valuatorand financial performance measures. More specifically, we investigate whether pillars of the BrandAssetTM Valuatormodel (Brand Vitality and Brand Stature) are associated with accounting performance (return on investment, return

  8. Évaluation des pratiques agricoles des légumes feuilles : le cas des ...

    African Journals Online (AJOL)

    Face à ce constat, le défi de la recherche serait la détermination du niveau actuel de contamination des légumes feuilles et des eaux du barrage et celui de l'État serait l'initiation de programmes de sensibilisation des producteurs par rapport à une gestion plus rigoureuse des pesticides. Mots-clés : pratiques paysannes, ...

  9. Performance investigation of an advanced multi-effect adsorption desalination (MEAD) cycle

    International Nuclear Information System (INIS)

    Thu, Kyaw; Kim, Young-Deuk; Shahzad, Muhammad Wakil; Saththasivam, Jayaprakash; Ng, Kim Choon

    2015-01-01

    Highlights: • Multi-effect adsorption desalination (MEAD) cycle for improved performance. • Passive heating of saline water recovering kinetic energy from desorption. • All effects operate at low temperature i.e., below 35 °C unlike conventional cycle. • High PR (6.3) with low temperature heat source. • Analyzed using p–T–q diagram tracking the temperatures and uptakes. - Abstract: This article presents the development of an advanced adsorption desalination system with quantum performance improvement. The proposed multi-effect adsorption desalination (MEAD) cycle utilizes a single heat source i.e., low-temperature hot water (as low as 55 °C). Passive heating of the feed water (no direct heating) is adopted using total internal heat recovery from the kinetic energy of desorbed vapor and water vapor uptake potential of the adsorbent. Thus, the evaporation in the MEAD cycle ensues at low temperatures ranging from 35 °C to 7 °C yet providing significantly high performance ratio. The energy from the regenerated vapor is recovered for multiple evaporation/condensation of saline water by a water-run-around circuit between the top brine temperature (TBT) effect and the AD condenser. The adsorbent material is the hydrophilic mesoporous silica gel with high pore surface area. Numerical simulation for such a cycle is developed based on experimentally verified model extending to multi-effect cycle. The system is investigated under several operation conditions such as cycle time allocation, heat source temperature and the number of intermediate effects. It is observed that most of the evaporating–condensing effects operate at low temperature i.e., below 35 °C as opposed to conventional multi-effect distillation (MED) cycle. For a MEAD cycle with 7 intermediate effects, the specific water production rate, the performance ratio and the gain output ratio are found to be 1.0 m"3/h tonne of silica gel, 6.3 and 5.1, respectively. Low scaling and fouling

  10. Application des TIC à l'atténuation des effets des catastrophes dans ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    L'Amérique centrale est souvent aux prises avec des inondations et des ... (SIG) et de traitement des images, afin de cartographier les dangers et de modéliser les ... de l'Institut d'étude du développement international de l'Université McGill.

  11. Pour une vision élargie des performances de la filière ostréicole à partir d’une approche en termes de patrimoine for a broader vision of the performances of the oyster farming industry from an approach in terms of heritage

    Directory of Open Access Journals (Sweden)

    Audrey Rivaud

    2012-05-01

    Full Text Available Dans le but de contribuer aux réflexions relatives à l’élargissement de la notion de performance, nous entendons traiter la question de la performance d’une filière économique dans une perspective située, à la fois dans l’espace et dans le temps, en mettant en lumière la variété des éléments constitutifs de la performance d’une part et l’existence de tensions, voire de contradictions entre ces éléments d’autre part. Dès lors, nous soutenons l’idée d’une diversité de modèles de production performants et insistons sur la nécessité d’identifier des indicateurs adaptés à cette diversité. Nous nous appuyons pour cela sur les outils conceptuels développés dans le cadre de l’économie patrimoniale. Nous illustrons notre propos en nous appuyant sur le cas de la filière ostréicole dans le Bassin d’Arcachon.This article deals with the question of the performance of an industry, viewed in its relations with the space and with the time. The purpose, which contributes to the literature relating to the broadening of the performance, is to insist on the variety of constituent elements of the performance on the one hand and on the existence of contradictions between these elements on the other hand. Thus, we assume the diversity of performing production models and we stress the importance to define indicators which take into account this diversity. To this end, the tools developed within the framework of the heritage economy are used. We refer to the case study of oyster-farming industry in the Arcachon Bay (France to illustrate these points.

  12. Investigating Assessment Bias for Constructed Response Explanation Tasks: Implications for Evaluating Performance Expectations for Scientific Practice

    Science.gov (United States)

    Federer, Meghan Rector

    Assessment is a key element in the process of science education teaching and research. Understanding sources of performance bias in science assessment is a major challenge for science education reforms. Prior research has documented several limitations of instrument types on the measurement of students' scientific knowledge (Liu et al., 2011; Messick, 1995; Popham, 2010). Furthermore, a large body of work has been devoted to reducing assessment biases that distort inferences about students' science understanding, particularly in multiple-choice [MC] instruments. Despite the above documented biases, much has yet to be determined for constructed response [CR] assessments in biology and their use for evaluating students' conceptual understanding of scientific practices (such as explanation). Understanding differences in science achievement provides important insights into whether science curricula and/or assessments are valid representations of student abilities. Using the integrative framework put forth by the National Research Council (2012), this dissertation aimed to explore whether assessment biases occur for assessment practices intended to measure students' conceptual understanding and proficiency in scientific practices. Using a large corpus of undergraduate biology students' explanations, three studies were conducted to examine whether known biases of MC instruments were also apparent in a CR instrument designed to assess students' explanatory practice and understanding of evolutionary change (ACORNS: Assessment of COntextual Reasoning about Natural Selection). The first study investigated the challenge of interpreting and scoring lexically ambiguous language in CR answers. The incorporation of 'multivalent' terms into scientific discourse practices often results in statements or explanations that are difficult to interpret and can produce faulty inferences about student knowledge. The results of this study indicate that many undergraduate biology majors

  13. Investigation of the effects of renewable diesel fuels on engine performance, combustion, and emissions

    KAUST Repository

    Ogunkoya, Dolanimi

    2015-01-01

    A study was undertaken to investigate renewable fuels in a compression-ignition internal combustion engine. The focus of this study was the effect of newly developed renewable fuels on engine performance, combustion, and emissions. Eight fuels were investigated, and they include diesel, jet fuel, a traditional biodiesel (fatty acid methyl ester: FAME), and five next generation biofuels. These five fuels were derived using a two-step process: hydrolysis of the oil into fatty acids (if necessary) and then a thermo-catalytic process to remove the oxygen via a decarboxylation reaction. The fuels included a fed batch deoxygenation of canola derived fatty acids (DCFA), a fed batch deoxygenation of canola derived fatty acids with varying amounts of H2 used during the deoxygenation process (DCFAH), a continuous deoxygenation of canola derived fatty acids (CDCFA), fed batch deoxygenation of lauric acid (DLA), and a third reaction to isomerize the products of the deoxygenated canola derived fatty acid alkanes (IPCF). Diesel, jet fuel, and biodiesel (FAME) have been used as benchmarks for comparing with the newer renewable fuels. The results of the experiments show slightly lower mechanical efficiency but better brake specific fuel consumption for the new renewable fuels. Results from combustion show shorter ignition delays for most of the renewable (deoxygenated) fuels with the exception of fed batch deoxygenation of lauric acid. Combustion results also show lower peak in-cylinder pressures, reduced rate of increase in cylinder pressure, and lower heat release rates for the renewable fuels. Emission results show an increase in hydrocarbon emissions for renewable deoxygenated fuels, but a general decrease in all other emissions including NOx, greenhouse gases, and soot. Results also demonstrate that isomers of the alkanes resulting from the deoxygenation of the canola derived fatty acids could be a potential replacement to conventional fossil diesel and biodiesel based on the

  14. LOD 1 VS. LOD 2 - Preliminary Investigations Into Differences in Mobile Rendering Performance

    Science.gov (United States)

    Ellul, C.; Altenbuchner, J.

    2013-09-01

    The increasing availability, size and detail of 3D City Model datasets has led to a challenge when rendering such data on mobile devices. Understanding the limitations to the usability of such models on these devices is particularly important given the broadening range of applications - such as pollution or noise modelling, tourism, planning, solar potential - for which these datasets and resulting visualisations can be utilized. Much 3D City Model data is created by extrusion of 2D topographic datasets, resulting in what is known as Level of Detail (LoD) 1 buildings - with flat roofs. However, in the UK the National Mapping Agency (the Ordnance Survey, OS) is now releasing test datasets to Level of Detail (LoD) 2 - i.e. including roof structures. These datasets are designed to integrate with the LoD 1 datasets provided by the OS, and provide additional detail in particular on larger buildings and in town centres. The availability of such integrated datasets at two different Levels of Detail permits investigation into the impact of the additional roof structures (and hence the display of a more realistic 3D City Model) on rendering performance on a mobile device. This paper describes preliminary work carried out to investigate this issue, for the test area of the city of Sheffield (in the UK Midlands). The data is stored in a 3D spatial database as triangles and then extracted and served as a web-based data stream which is queried by an App developed on the mobile device (using the Android environment, Java and OpenGL for graphics). Initial tests have been carried out on two dataset sizes, for the city centre and a larger area, rendering the data onto a tablet to compare results. Results of 52 seconds for rendering LoD 1 data, and 72 seconds for LoD 1 mixed with LoD 2 data, show that the impact of LoD 2 is significant.

  15. Fit to Perform: An Investigation of Higher Education Music Students’ Perceptions, Attitudes, and Behaviors toward Health

    Science.gov (United States)

    Araújo, Liliana S.; Wasley, David; Perkins, Rosie; Atkins, Louise; Redding, Emma; Ginsborg, Jane; Williamon, Aaron

    2017-01-01

    Making music at the highest international standards can be rewarding, but it is also challenging, with research highlighting pernicious ways in which practicing and performing can affect performers’ health and wellbeing. Several studies indicate that music students’ perceptions, attitudes, and behaviors toward health and healthy living are less than optimal, especially considering the multiple physical and psychological demands of their day-to-day work. This article presents the results of a comprehensive screening protocol that investigated lifestyle and health-related attitudes and behaviors among 483 undergraduate and postgraduate students (mean age = 21.29 years ± 3.64; 59% women) from ten conservatoires. The protocol included questionnaires measuring wellbeing, general health, health-promoting behaviors, perfectionism, coping, sleep quality, and fatigue. On each measure, the data were compared with existing published data from similar age groups. The results indicate that music students have higher levels of wellbeing and lower fatigue than comparable samples outside of music. However, they also reveal potentially harmful perceptions, attitudes, and behaviors toward health. Specifically, engagement in health responsibility and stress management was low, which along with high perfectionistic strivings, limited use of coping strategies, poor sleep quality, and low self-rated health, paints a troubling picture both for the music students and for those who support their training. The findings point to the need for more (and more effective) health education and promotion initiatives within music education; in particular, musicians should be better equipped with mental skills to cope with constant pressure to excel and high stress levels. In part, this calls for musicians themselves to engage in healthier lifestyles, take greater responsibility for their own health, and be aware of and act upon health information in order to achieve and sustain successful

  16. Experimental investigation on high performance RC column with manufactured sand and silica fume

    Science.gov (United States)

    Shanmuga Priya, T.

    2017-11-01

    In recent years, the use High Performance Concrete (HPC) has increased in construction industry. The ingredients of HPC depend on the availability and characteristics of suitable alternative materials. Those alternative materials are silica fume and manufactured sand, a by products from ferro silicon and quarry industries respectively. HPC made with silica fume as partial replacement of cement and manufactured sand as replacement of natural sand is considered as sustainable high performance concrete. In this present study the concrete was designed to get target strength of 60 MPa as per guide lines given by ACI 211- 4R (2008). The laboratory study was carried out experimentally to analyse the axial behavior of reinforced cement HPC column of size 100×100×1000mm and square in cross section. 10% of silica fume was preferred over ordinary portland cement. The natural sand was replaced by 0, 20, 40, 60, 80 and 100% with Manufactured Sand (M-Sand). In this investigation, totally 6 column specimens were cast for mixes M1 to M6 and were tested in 1000kN loading frame at 28 days. From this, Load-Mid height deflection curves were drawn and compared. Maximum ultimate load carrying capacity and the least deflection is obtained for the mix prepared by partial replacement of cement with 10% silica fume & natural sand by 100% M-Sand. The fine, amorphous and pozzalonic nature of silica fume and fine mineral particles in M- Sand increased the stiffness of HPC column. The test results revealed that HPC can be produced by using M-Sand with silica fume.

  17. Experimental investigation of pulsating heat pipe performance with regard to fuel cell cooling application

    International Nuclear Information System (INIS)

    Clement, Jason; Wang Xia

    2013-01-01

    A pulsating heat pipe (PHP) is a closed loop, passive heat transfer device. Its operation depends on the phase change of a working fluid within the loop. Design and performance testing of a pulsating heat pipe was conducted under conditions to simulate heat dissipation requirements of a proton exchange membrane (PEM) fuel cell stack. Integration of pulsating heat pipes within bipolar plates of the stack would eliminate the need for ancillary cooling equipment, thus also reducing parasitic losses and increasing energy output. The PHP under investigation, having dimensions of 46.80 cm long and 14.70 cm wide, was constructed from 0.3175 cm copper tube. Heat pipes effectiveness was found to be dependent upon several factors such as energy input, types of working fluid and its filling ratio. Power inputs to the evaporator side of the pulsating heat pipe varied from 80 to 180 W. Working fluids tested included acetone, methanol, and deionized water. Filling ratios between 30 and 70 percent of the total working volume were also examined. Methanol outperformed other fluids tested; with a 45 percent fluid fill ratio and a 120 W power input, the apparatus took the shortest time to reach steady state and had one of the smallest steady state temperature differences. The various conditions studied were chosen to assess the heat pipe's potential as cooling media for PEM fuel cells. - Highlights: ► Methanol as a working fluid outperformed both acetone and water in a pulsating heat pipe. ► Performance for the PHP peaked with methanol and a fill ratio of 45 percent fluid to total volume. ► A smaller resistance was associated with a higher power input to the system.

  18. Fit to Perform: An Investigation of Higher Education Music Students’ Perceptions, Attitudes, and Behaviors toward Health

    Directory of Open Access Journals (Sweden)

    Liliana S. Araújo

    2017-10-01

    Full Text Available Making music at the highest international standards can be rewarding, but it is also challenging, with research highlighting pernicious ways in which practicing and performing can affect performers’ health and wellbeing. Several studies indicate that music students’ perceptions, attitudes, and behaviors toward health and healthy living are less than optimal, especially considering the multiple physical and psychological demands of their day-to-day work. This article presents the results of a comprehensive screening protocol that investigated lifestyle and health-related attitudes and behaviors among 483 undergraduate and postgraduate students (mean age = 21.29 years ± 3.64; 59% women from ten conservatoires. The protocol included questionnaires measuring wellbeing, general health, health-promoting behaviors, perfectionism, coping, sleep quality, and fatigue. On each measure, the data were compared with existing published data from similar age groups. The results indicate that music students have higher levels of wellbeing and lower fatigue than comparable samples outside of music. However, they also reveal potentially harmful perceptions, attitudes, and behaviors toward health. Specifically, engagement in health responsibility and stress management was low, which along with high perfectionistic strivings, limited use of coping strategies, poor sleep quality, and low self-rated health, paints a troubling picture both for the music students and for those who support their training. The findings point to the need for more (and more effective health education and promotion initiatives within music education; in particular, musicians should be better equipped with mental skills to cope with constant pressure to excel and high stress levels. In part, this calls for musicians themselves to engage in healthier lifestyles, take greater responsibility for their own health, and be aware of and act upon health information in order to achieve and

  19. The performance investigation of a temperature cascaded cogeneration system equipped with adsorption desalination unit

    KAUST Repository

    Myat, Aung

    2013-02-01

    This paper presents the performance investigation of a temperature cascaded cogeneration plant, shortly in TCCP, equipped with an efficient waste heat recovery system. The TCCP or cogeneration system produces four types of useful energy namely (i) electricity, (ii) steam, (iii) cooling, and (iv) dehumidification and distilled water by utilizing single energy source. The TCCP comprises a Capstone C30 micro-turbine that generates nominal capacity of 26 kW of electricity, a compact and efficient waste heat recovery system and a host of waste heatactivated devices namely (i) a steam generator, (ii) an absorption chiller, (iii) an adsorption desalination system, and (iv) a multi-bed desiccant dehumidifier. The analysis is performed under different operation conditions such as heat source temperatures, flow rates of heat transfer fluids and chilled water inlet temperatures. The only single heat source for TCCP is obtained from exhaust gas of micro-turbine and it is channeled to a series of waste heat recovery heat exchangers to steam and hot water at different temperatures. Hot water produced by such a compact heat exchangers is the driving heat source to produce steam of 15 kg/h, cooling of 2 Rton, dehumidification of 2 Rton, and distilled water of 0.7 m3/day. A set of experiments, both part load and full load, of micro-turbine is conducted to examine the electricity generation and the exhaust gas temperature. It is observed that energy utilization factor could achieve as high as 70% while fuel energy saving ratio is found to be 28%. © 2013 Desalination Publications. All rights reserved.

  20. The performance investigation of a temperature cascaded cogeneration system equipped with adsorption desalination unit

    KAUST Repository

    Myat, Aung; Thu, Kyaw; Kim, Youngdeuk; Ng, K. C.

    2013-01-01

    This paper presents the performance investigation of a temperature cascaded cogeneration plant, shortly in TCCP, equipped with an efficient waste heat recovery system. The TCCP or cogeneration system produces four types of useful energy namely (i) electricity, (ii) steam, (iii) cooling, and (iv) dehumidification and distilled water by utilizing single energy source. The TCCP comprises a Capstone C30 micro-turbine that generates nominal capacity of 26 kW of electricity, a compact and efficient waste heat recovery system and a host of waste heatactivated devices namely (i) a steam generator, (ii) an absorption chiller, (iii) an adsorption desalination system, and (iv) a multi-bed desiccant dehumidifier. The analysis is performed under different operation conditions such as heat source temperatures, flow rates of heat transfer fluids and chilled water inlet temperatures. The only single heat source for TCCP is obtained from exhaust gas of micro-turbine and it is channeled to a series of waste heat recovery heat exchangers to steam and hot water at different temperatures. Hot water produced by such a compact heat exchangers is the driving heat source to produce steam of 15 kg/h, cooling of 2 Rton, dehumidification of 2 Rton, and distilled water of 0.7 m3/day. A set of experiments, both part load and full load, of micro-turbine is conducted to examine the electricity generation and the exhaust gas temperature. It is observed that energy utilization factor could achieve as high as 70% while fuel energy saving ratio is found to be 28%. © 2013 Desalination Publications. All rights reserved.

  1. Preparation and investigation of nano-AlN lubricant with high performance

    Energy Technology Data Exchange (ETDEWEB)

    Tao, Yu; Tao, Yuxiao; Wang, Biaobing [School of Materials Science and Engineering, Changzhou University, Changzhou 201326 (China); Tai, Yanlong, E-mail: ytai@ucdavis.edu [Department of Biomedical Engineering, University of California Davis, Davis, CA 95616 (United States)

    2014-09-15

    A new kind of macromolecular coupling agent (LMW-a-PP-g-MAH) of maleic anhydride (MAH) onto low-molecular-weight atactic polypropylene (LMW-a-PP) was synthesized according to molecular design and was used as modifier for surface modification of nano-Aluminum nitride (AlN) by a high-pressure homogenization (HPH) process. IR was conducted to confirm the chemical structure of the step products of LMW-a-PP-g-MAH. The availability as a modifier for surface modification of nano-AlN was distinguished by Fourier transform infrared spectroscopy (FTIR), particle size analysis, transmission electron microscope (TEM), thermogravimetric analysis (TGA), contact angle experiments and the dispersion stability in dimethylbenzene and Greatwall lubrication oil. It can be inferred that the optimal loading is 10 wt. %–12 wt. % of LMW-a-PP-g-MAH to modify nano-AlN particles. Nano-AlN lubricating composite materials (LMW-a-PP-g-MAH-AlN) was used to improve the antifriction performance and the load capability of Greatwall lubrication oil, and maximum non-seizure load (P{sub B}) can increase highly from 1000 N to 1490 N when the loading is 0.3 wt. %. - Highlights: • Design and synthesis of macromolecular coupling agent (a-PP-g-MAH). • Surface modification and characterization of nano-AlN by HPH process. • Preparation and investigation of nano-AlN/lubricating oil with high performance.

  2. An investigation of performance characteristics of a pixellated room-temperature semiconductor detector for medical imaging

    Energy Technology Data Exchange (ETDEWEB)

    Guerra, P; Santos, A [Centro de Investigacion Biomedica de Bioningenieria, Biomateriales y Nanomedicina, CEEI-Modulo 3, C/ Maria de Luna, 11, 50018 Zaragoza (United States); Darambara, D G, E-mail: pguerra@ciber-bbn.e [Joint Department of Physics, Royal Marsden NHS Foundation Trust and Institute of Cancer Research, Fulham Road, London SW3 6JJ (United Kingdom)

    2009-09-07

    The operation of any semiconductor detector depends on the movement of the charge carriers, which are created within the material when radiation passes through, as a result of energy deposition. The carrier movement in the bulk semiconductor induces charges on the metal electrodes, and therefore a current on the electrodes and the external circuit. The induced charge strongly depends on the material transport parameters as well as the geometrical dimensions of a pixellated semiconductor detector. This work focuses on the performance optimization in terms of energy resolution, detection efficiency and intrinsic spatial resolution of a room-temperature semiconductor pixellated detector based on CdTe/CdZnTe. It analyses and inter-relates these performance figures for various dimensions of CdTe and CdZnTe detectors and for an energy range spanning from x-ray (25 keV) to PET (511 keV) imaging. Monte Carlo simulations, which integrate a detailed and accurate noise model, are carried out to investigate several CdTe/CdZnTe configurations and to determine possible design specifications. Under the considered conditions, the simulations demonstrate the superiority of the CdZnTe over the CdTe in terms of energy resolution and sensitivity in the photopeak. Further, according to the results, the spatial resolution is maximized at high energies and the energy resolution at low energies, while a reasonable detection efficiency is achieved at high energies, with a 1 x 1 x 6 mm{sup 3} CdZnTe pixellated detector.

  3. An investigation of performance characteristics of a pixellated room-temperature semiconductor detector for medical imaging

    International Nuclear Information System (INIS)

    Guerra, P; Santos, A; Darambara, D G

    2009-01-01

    The operation of any semiconductor detector depends on the movement of the charge carriers, which are created within the material when radiation passes through, as a result of energy deposition. The carrier movement in the bulk semiconductor induces charges on the metal electrodes, and therefore a current on the electrodes and the external circuit. The induced charge strongly depends on the material transport parameters as well as the geometrical dimensions of a pixellated semiconductor detector. This work focuses on the performance optimization in terms of energy resolution, detection efficiency and intrinsic spatial resolution of a room-temperature semiconductor pixellated detector based on CdTe/CdZnTe. It analyses and inter-relates these performance figures for various dimensions of CdTe and CdZnTe detectors and for an energy range spanning from x-ray (25 keV) to PET (511 keV) imaging. Monte Carlo simulations, which integrate a detailed and accurate noise model, are carried out to investigate several CdTe/CdZnTe configurations and to determine possible design specifications. Under the considered conditions, the simulations demonstrate the superiority of the CdZnTe over the CdTe in terms of energy resolution and sensitivity in the photopeak. Further, according to the results, the spatial resolution is maximized at high energies and the energy resolution at low energies, while a reasonable detection efficiency is achieved at high energies, with a 1 x 1 x 6 mm 3 CdZnTe pixellated detector.

  4. SOL-PAC: Integrated solar heating and heat pump systems for refurbished buildings - Performance analysis; SOL-PAC: analyse des performances du couplage d'une pompe a chaleur avec une installation solaire thermique pour la renovation - Rapport final

    Energy Technology Data Exchange (ETDEWEB)

    Citherlet, C.; Bony, J.; Nguyen, B.

    2008-07-01

    The purpose of this study is to evaluate the energetic and economic performances of various types of brine/water heat pumps coupled with a fan coil fitted with solar collectors. Different indicators such as the annual coefficient of performance or the electricity consumption have been compared between the different analysed systems. The optimization of the energy control system and energy storage was investigated in order to reduce the operation time of the fan coil. This study has been performed using the TRNSYS computerized simulation package. The icing of the fan coil as well as its defrosting cycles could not been taken into account within the framework of this project, because of a lack of a numerical model. At current electricity prices, the most economical solution remains the heat pump without solar collectors. However, from an energy point of view, the annual overall coefficient of performance of the installation may be improved by 15 to 36%, depending on the climate, thanks to the coupling with solar collectors. (author)

  5. Investigation on the effect of the reservoir variables and operational parameters on SAGD performance

    Energy Technology Data Exchange (ETDEWEB)

    Hashemi Kiasari, H.; Naderifar, A. [AmirKabir University of Technology, Tehran (Iran, Islamic Republic of). Petroleum Engineering Dept.; Sedaee Sola, B. [University of Tehran (Iran, Islamic Republic of). Faculty of Engineering. Inst. of Petroleum Engineering], e-mail: sedaeesola@yahoo.com

    2010-04-15

    Steam injection is the most important thermal enhanced oil recovery method. One typical procedure is Steam- Assisted Gravity Drainage (SAGD), which is a promising recovery process to produce heavy oil and bitumen. The method ensures a stable displacement of steam at economical rates by using gravity as the driving force and a pair of horizontal wells for injection/production. There are numerous studies done on SAGD in conventional reservoirs, but the majority of them focus on the investigation of the process in microscopic scale. In this study, we investigate the SAGD process with a preheating period, using steam circulation in well pair on a field scale. The synthetic homogenous model was constructed by CMG and simulated using the STARS module. The effects of operational parameters, such as preheating period, vertical well spacing, well pair length, steam quality and production pressure, and reservoir variables, such as rock porosity and permeability, vertical-to-horizontal permeability ratio, thermal conductivity of the formation and rock heat capacity, on the SAGD performance were investigated. The results show that the preheating period affects mainly the initial stages of production. Due to preheating, the well pair communication with the higher vertical distances is also established; therefore, there was no considerable difference between oil productions in various well spacing cases. As steam quality increases, the oil production in later production times also increases. At shorter well pair, more steam can be injected per unit length of well, but, on the other hand, the production well recovers less heated oil area; therefore the well pair length should be optimized in all cases. By decreasing the production well bottom-hole pressure, more heated oil in near well region is produced; therefore, the injected steam raises more in the depleted area. The results of the simulations show that very low permeability leads to a fully unsuccessful SAGD process. In the

  6. Gestion des déchets dangereux et responsabilité sociale des firmes

    Directory of Open Access Journals (Sweden)

    Faouzi Bensebaa

    2010-10-01

    Full Text Available Prenant les déchets électriques et électroniques comme terrain d’observation, cette recherche étudie les fondements du commerce illégal de déchets dangereux des pays développés vers les PED. En effet, malgré la multiplication des législations, le problème des déchets dans les pays développés, loin d’être traité en amont, l’est en grande partie en aval par leur délocalisation dans les PED. Les deux lectures proposées, économique et institutionnelle, permettent de montrer comment les contraintes de coût de gestion des déchets dans les pays développés conjuguées à l’imperfection et à la non-application des législations conduisent à des comportements socialement irresponsables. À partir de là, l’implication des parties prenantes est suggérée comme solution pour éliminer ce type de comportements.Based on the analysis of the waste electrical and electronic equipments (WEEE, the research investigates the motivations for the illegal cross-border trade in hazardous wastes from developed countries to developing countries. Although many developed countries have implemented waste shipment regulations, they are passing the risks and costs of E-waste to developing countries. Indeed, E-waste is often sent for recycling and refurbishing in developing countries. The two-side proposed approach (i.e. economical and institutional suggests that both the cost for firms to comply with increasing regulations and the imperfect implementation of regulatory restrictions lead to socially irresponsible behaviours. An increasing and better involvement of stakeholders may be put forward as a solution.

  7. An investigation of the Performance of a Conical Solar Water Heater in the Kingdom of Bahrain

    Science.gov (United States)

    Gaaliche, Nessreen; Ayhan, Teoman; Fathallah, Raouf

    2017-11-01

    Domestic water heater corresponds to 25% of the house energy consumption and can play an important role to reduce energy house expenses. Solar energy offers a preferred renewable energy resource because of its economic and environmental advantages. It is considered the best alternative to reduce domestic water heater energy consumption cost. Converting solar energy into heat can be considered among the simplest used systems. Solar thermal conversion is more efficient than solar electrical direct conversion method. Solar water heater systems are particularly easy to use and to repair. The integrated conical solar collector water heater (ICSCWH) is so far the easiest among water heating systems. The ICSCWH converts directly and efficiently the solar flux into heat. In order to expand the utilization of ICSCWH systems, many design modifications have been examined and analyzed. This study provides an experimental investigation and mathematical simulation of an ICSCWH system equipped with a glass cover resulting in the increase of the maximum absorption. Integrating the cone-shaped heat collector with an aluminum spiral pipe flow system may enhance the efficiency of the proposed system. In order to maximize the solar radiation of the system, the solar water heater has been designed in a conical shape, which removes the need to change its orientation toward the sun to receive the maximum sun radiation during the day. In this system, the heating of water has been obtained using the spiral pipe flow without the use of the solar cells and mirrors in order to reduce the total cost. The storage water tank of this system is coupled with a conical solar collector. Based on the above design, the solar water heater has been fabricated and tested. In addition, an analytical modeling approach aiming to predict the flow rate within the conical integrated collector storage solar water heater (ICSSWH) and its efficiency, was developed. Modeling through a numerical simulation approach

  8. An investigation of the Performance of a Conical Solar Water Heater in the Kingdom of Bahrain

    Directory of Open Access Journals (Sweden)

    Gaaliche Nessreen

    2017-01-01

    Full Text Available Domestic water heater corresponds to 25% of the house energy consumption and can play an important role to reduce energy house expenses. Solar energy offers a preferred renewable energy resource because of its economic and environmental advantages. It is considered the best alternative to reduce domestic water heater energy consumption cost. Converting solar energy into heat can be considered among the simplest used systems. Solar thermal conversion is more efficient than solar electrical direct conversion method. Solar water heater systems are particularly easy to use and to repair. The integrated conical solar collector water heater (ICSCWH is so far the easiest among water heating systems. The ICSCWH converts directly and efficiently the solar flux into heat. In order to expand the utilization of ICSCWH systems, many design modifications have been examined and analyzed. This study provides an experimental investigation and mathematical simulation of an ICSCWH system equipped with a glass cover resulting in the increase of the maximum absorption. Integrating the cone-shaped heat collector with an aluminum spiral pipe flow system may enhance the efficiency of the proposed system. In order to maximize the solar radiation of the system, the solar water heater has been designed in a conical shape, which removes the need to change its orientation toward the sun to receive the maximum sun radiation during the day. In this system, the heating of water has been obtained using the spiral pipe flow without the use of the solar cells and mirrors in order to reduce the total cost. The storage water tank of this system is coupled with a conical solar collector. Based on the above design, the solar water heater has been fabricated and tested. In addition, an analytical modeling approach aiming to predict the flow rate within the conical integrated collector storage solar water heater (ICSSWH and its efficiency, was developed. Modeling through a numerical

  9. Investigations on the structure of complex compounds by radioisotope exchange. The structure of cyanonitrosyl complexes; Recherches sur la structure des complexes par echange de radioisotopes - Structure des complexes cyanonitrosyliques; Issledovanie struktury slozhnykh soedinenij pri pomoshchi radioizotopnogo obmena - struktura slozhnykh tsianonitrozilovykh soedinenij; Estudio de la estructura de complejos por intercambio radioisotopico - Estructura de los complejos cianonitrosilicos

    Energy Technology Data Exchange (ETDEWEB)

    Jezowska-Trzeblatowska, B; Ziolkowski, J [University of Wroclaw (Poland)

    1962-03-15

    The nitrosyl group as the complex ligand is of particular interest because of its structure as well as its ability to form NO{sup -} or NO{sup +} groups. To study the electronic structure of K{sub 3}Mn(CN){sub 6} and K{sub 3}Mn(CN){sub 5}NO, the valency of the metal and the bonding type, investigations have been carried out by applying the method of radioisotopic exchange, as well as other physico-chemical methods. It has been found that by introducing the nitrosyl group into the hexacyanate ion, the stability of the complex is largely enhanced both in the solid state and in solution. This observation was confirmed by investigation of exchange kinetics in the systems: (I) K{sub 3}Mn(CN){sub 6} + KC{sup 14}N and (II) K{sub 3}Mn(CN){sub 5}NO + KC{sup 14}N In both cases, the exchange reactions are of first order, taken as a function of time, but differ considerably in their velocities, as well as in their activation energies. The anion Mn(CN){sub 5}NO{sup -3} is sensitive to light, so that the exchange reaction is photochemical in character. The ratio of the exchange velocity constants in the dark and at standardized illumination is 1:100. The first exchange reaction (I) proceeds according to the association mechanism while the second one (II) possesses a composite association- dissociation mechanism. Analysis of the partition of activity within the cyanide groups undergoing exchange in the isotopic equilibrium state, revealed the identity of at least four cyanide groups. The high stability of the nitrosyl complex, as compared with the hexacyanate, was proved in various ways. All this pointed to a NO{sup -} structure in the complex. Previous research has shown that the nitrosyl group is coordinated as NO{sup +}. This suggests a resonance structure of the complex by assuming the resonance of an electronic pair between the T{sub 2g} shell of the central atom and the p shell of the nitrogen atom. (author) [French] Le groupe nitrosyle en tant que coordinat du complexe

  10. An investigation into the relationship between thermal shock resistance and ballistic performance of ceramic materials

    Science.gov (United States)

    Beaumont, Robert

    Currently, there are no reliable methods for screening potential armour materials and hence full-scale ballistic trials are needed. These are both costly and time-consuming in terms of the actual test and also in the materials development that needs to take place to produce sufficient material to give a meaningful result. Whilst it will not be possible to dispense with ballistic trials before material deployment in armour applications, the ability to shorten the development cycle would be advantageous. The thermal shock performance of ceramic armour materials has been highlighted as potential marker for ballistic performance. Hence the purpose of this study was to investigate this further. A new thermal shock technique that reproduced features relevant to ballistic testing was sought. As it would be beneficial to have a simple test that did not use much material, a water-drop method was adopted. This was combined with a variety of characterisation techniques, administered pre- and post-shock. The methods included measurement of the amplitude of ultrasonic wave transmission through the sample alongside residual strength testing using a biaxial ball-on-ball configuration and reflected light and confocal microscopy. Once the protocols had been refined the testing regime was applied to a group of ceramic materials. The materials selected were from two broad groups: alumina and carbide materials. Carbide ceramics show superior performance to alumina ceramics in ballistic applications so it was essential that any screening test would be easily able to differentiate the two groups. Within the alumina family, two commercially available materials, AD995 and Sintox FA, were selected. These were tested alongside three developmental silicon carbide-boron carbide composites, which had identical chemical compositions but different microstructures and thus presented more of a challenge in terms of differentiation. The results from the various tests were used to make predictions

  11. REPRISE DES COURS - Yoga

    CERN Multimedia

    Club de Yoga

    2015-01-01

    REPRISE DES COURS – Venez nombreux ! Yoga, Sophrologie, Tai Chi La liste des cours pour le semestre allant du 1er septembre 2015 au 31 janvier 2016 est disponible sur notre site web : http://club-yoga.web.cern.ch Lieu Les cours ont lieu dans la salle des clubs, à l’entresol du restaurant No 2, Bât. 504 (dans la salle no 3 pour la Sophrologie). Prix des cours Le prix pour le semestre (environ 18 leçons) est fixé à 220 CHF plus 10 CHF d’adhésion annuelle au Club. Couple : 200 CHF par personne. 2 cours par semaine : 400 CHF. Inscriptions Les inscriptions aux cours seront prises directement auprès du professeur, lors de la 1ère séance. Avant de s’inscrire pour le semestre, il est possible d’essayer une séance gratuitement. Informations : http://club-yoga.web.cern.ch ----------------------------------------- cern.ch/club-yoga/

  12. Praxis des Klebens

    CERN Document Server

    Theuerkauff, Petra

    1989-01-01

    Bei diesem Buch handelt es sich um einen Leitfaden fur Klebepraktiker. Es werden die verschiedenen Einzelschritte beim kleben beschrieben, als auch die vorbereitenden Massnahmen und anschliessenden Prufverfahren auf Festigkeit behandelt. Das Buch sollte an keinem Arbeitsplatz fehlen, wo man sich mit Problemen der Fugetechnik des Klebens beschaftigt.

  13. Dimensions des stabulations 2018

    OpenAIRE

    Früh, Barbara; Maurer, Veronika; Schneider, Claudia; Schürmann, Stefan; Spengler Neff, Anet; Werne, Steffen

    2018-01-01

    Les «Dimensions des stabulations» contiennent toutes les dimensions pour les stabulations et les parcours pour la production animale en agriculture biologique. Cette liste sert d’instrument de planification pour les éleveurs, d’outil de travail pour la vulgarisation et d’ouvrage de référence pour le contrôle bio.

  14. Direction des Publications

    African Journals Online (AJOL)

    Synthese

    économique des services rendus par les écosystèmes marins. La richesse ... croissance plus rapide que la moyenne de l‟économie ...... services and natural capital. Nature. 387, 253-260. .... d‟interactions où l‟humain est partie prenante. In.

  15. La physique des infinis

    CERN Document Server

    Bernardeau, Francis; Laplace, Sandrine; Spiro, Michel

    2013-01-01

    Écrire l'histoire de l'Univers, tel est l'objectif commun des physiciens des particules et des astrophysiciens. Pour y parvenir, deux approches s'épaulent : la voie de l'infiniment petit, que l'on emprunte via de gigantesques accélérateurs de particules, et celle de l'infiniment grand, dont le laboratoire est l'Univers. Un Univers qui est bien loin d'avoir livré tous ses secrets. On connaît à peine 4,8 % de la matière qui le constitue, le reste étant composé de matière noire (25,8 %) et d'énergie noire (69,4 %), toutes deux de nature inconnue. Et si la récente découverte du boson de Higgs valide le Modèle standard de la physique des particules, celui-ci est toujours incomplet et doit être étendu à ou dépassé. Est-on arrivé au bout du jeu de poupées russes de la matière ? Quelles sont les particules manquantes ? Faut-il revoir les lois fondamentales ? Quels instruments faut-il mettre en œuvre pour accéder à cette « nouvelle physique » ? Comment parler de Super Big Science aux citoye...

  16. Investigations on photoelectrochemical performance of boron doped ZnO nanorods synthesized by facile hydrothermal technique

    Science.gov (United States)

    Sharma, Akash; Chakraborty, Mohua; Thangavel, R.

    2018-05-01

    Undoped and 10% Boron (B)-doped Zinc Oxide nanorods (ZnO NRs) on Tin doped Indium Oxide (ITO) coated glass substrates were synthesized using facile sol-gel, spin coating and hydrothermal method. The impact of adding Boron on the structural, optical properties, surface morphology and photoelectrochemical (PEC) performances of the ZnO NRs have been investigated. The XRD pattern confirmed the formation of pure hexagonal phase with space group P63mc (186). The same can also be clearly observed form the FESEM images. The UV-Vis study shows the narrowing in band gap from 3.22 eV to 3.19 eV with incorporation of Boron in ZnO matrix. The B-doped ZnO NRs sample shows an enhanced photocurrent density of 1.31 mA/cm2 at 0.5 V (vs. Ag/AgCl), which is more than 171% enhancement compared to bare ZnO NRs (0.483 mA/cm2) in 0.1 M Na2SO4 aqueous solution. The results clearly indicates that the boron doped ZnO NRs can be used as an efficient photoelectrode material for photoelectrochemical cell.

  17. Experimental Investigation on the Performance of Grinding Assisted Electrochemical Discharge Drilling of Glass

    Directory of Open Access Journals (Sweden)

    Ladeesh V G

    2016-01-01

    Full Text Available Grinding assisted electrochemical discharge drilling (G-ECDD is a novel technique for producing micro and macro holes in brittle materials including advanced ceramics and glass, both efficiently and economically. G-ECDD involves the use of a rotating diamond core drill as the tool in a normal electrochemical discharge machine setup. The material removal happens by a combination of thermal melting due to electric discharges, followed by grinding action of diamond grits and chemical etching action. In this study, the effect of process parameters like voltage, duty cycle, cycle time and electrolyte concentration on material removed (MR was investigated systematically using response surface methodology. Analysis of variance was performed to identify the significant factors and their percentage contribution. The most significant factor was found to be duty cycle followed by voltage, cycle time and concentration. A quadratic mathematical model was developed to predict MR. Tool wear was found for different frequencies and voltages. Higher tool wear was observed for high frequency above 5kHz pulsed DC supply at high voltage of 110V. Tool wear at the end face of the tool was found to be a significant problem affecting the tool life.

  18. Dose-response investigation into glucose facilitation of memory performance and mood in healthy young adults.

    Science.gov (United States)

    Sünram-Lea, Sandra I; Owen, Lauren; Finnegan, Yvonne; Hu, Henglong

    2011-08-01

    It has been suggested that the memory enhancing effect of glucose follows an inverted U-shaped curve, with 25 g resulting in optimal facilitation in healthy young adults. The aim of this study was to further investigate the dose dependency of the glucose facilitation effect in this population across different memory domains and to assess moderation by interindividual differences in glucose regulation and weight. Following a double-blind, repeated measures design, 30 participants were administered drinks containing five different doses of glucose (0 g, 15 g, 25 g, 50 g, and 60 g) and were tested across a range of memory tasks. Glycaemic response and changes in mood state were assessed following drink administration. Analysis of the data showed that glucose administration did not affect mood, but significant glucose facilitation of several memory tasks was observed. However, dose-response curves differed depending on the memory task with only performance on the long-term memory tasks adhering largely to the previously observed inverted U-shaped dose-response curve. Moderation of the response profiles by interindividual differences in glucose regulation and weight was observed. The current data suggest that dose-response function and optimal dose might depend on cognitive domain and are moderated by interindividual differences in glucose regulation and weight.

  19. Numerical Investigation on Effect of Immersed Blade Depth on the Performance of Undershot Water Turbines

    Directory of Open Access Journals (Sweden)

    Yah Nor Fadilah

    2016-01-01

    Full Text Available Energy, especially electricity, plays a vital role in global social and economic development. High annual rain rate in Malaysia seems a good potential for electricity generation especially through small hydro powers. Undershot water turbines are one of the hydropower turbines used for many years. However, the effect of blade depth immersed in the flowing water is not fully investigated. Therefore, the purpose of this paper is to study the effect of immersed blade depth for straight blade undershot water turbine in power generation by using Computational Fluid Dynamics (CFD method. ANSYS CFX 15.0 was used to perform three dimensional analysis under steady state, incompressible, and non-isothermal conditions. The water wheel with number of blades of 6 and four different immersed depth was applied for each simulation. There are four different immersed depth was applied to each simulation, which are 20 mm, 40 mm, 60 mm and 80 mm. From the simulation result, it was found that the optimum immersed depth is 40 mm where the torque load and power generated were 0.264 N.m and 1.318 Watt respectively.

  20. An investigation on the performance characteristics of solar flat plate collector with different selective surface coatings

    Energy Technology Data Exchange (ETDEWEB)

    Madhukeshwara, N. [Department of Mechanical Engineering, B.I.E.T, Davanagere, Karnataka (India); Prakash, E.S. [Department of Studies in Mechanical Engineering, U.B.D.T.C.E, Davanagere, Karnataka (India)

    2012-07-01

    In the present work, investigations are made to study performance characteristics of solar flat plate collector with different selective surface coatings. Flat plate collector is one of the important solar energy trapping device which uses air or water as working fluid. Of the many solar collector concepts presently being developed, the relative simple flat plate solar collector has found the widest application so far. Its characteristics are known, and compared with other collector types, it is the easiest and least expensive to fabricate, install, and maintain. Moreover, it is capable of using both the diffuse and the direct beam solar radiation. For residential and commercial use, flat plate collectors can produce heat at sufficiently high temperatures to heat swimming pools, domestic hot water, and buildings; they also can operate a cooling unit, particularly if the incident sunlight is increased by the use of reflector. Temperatures up to 70 C are easily attained by flat plate collectors. With very careful engineering using special surfaces, reflectors to increase the incident radiation and heat resistant materials, higher operating temperatures are feasible.

  1. Performance investigation on dissipative dielectric elastomer generators with a triangular energy harvesting scheme

    Science.gov (United States)

    Fan, Peng; Chen, Hualing; Li, Bo; Wang, Yongquan

    2017-11-01

    In this letter, a theoretical framework describing an energy harvesting cycle including the loss of tension (LT) process is proposed to investigate the energy harvesting performance of a dielectric elastomer generator (DEG) with a triangular energy harvesting scheme by considering material viscosity and leakage current. As the external force that is applied to the membrane decreases, the membrane is relaxed. When the external force decreases to zero, the condition is known as LT. Then the membrane undergoing LT can further relax, which is referred to as the LT process. The LT process is usually ignored in theoretical analysis but observed from energy harvesting experiments of DEGs. It is also studied how shrinking time and transfer capacitor affect the energy conversion of a DEG. The results indicate that energy density and conversion efficiency can be simultaneously improved by choosing appropriate shrinking time and transfer capacitor to optimize the energy harvesting cycle. The results and methods are expected to provide guidelines for the optimal design and assessment of DEGs.

  2. Characterization and Antibiofouling Performance Investigation of Hydrophobic Silver Nanocomposite Membranes: A Comparative Study.

    Science.gov (United States)

    Amouamouha, Maryam; Badalians Gholikandi, Gagik

    2017-11-12

    Biofouling is one of the drawbacks restricting the industrial applications of membranes. In this study, different thicknesses of silver nanoparticles with proper adhesion were deposited on poly(vinylidenefluoride) (PVDF) and polyethersulfone (PES) surfaces by physical vapor deposition (PVD). The crystalline and structural properties of modified and pure membranes were investigated by carrying out X-ray diffraction (XRD) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). Scanning electron microscope (SEM) and atomic force microscopy (AFM) analyses were employed to examine the surface morphology and the bacteria anti-adhesion property of the membranes. The morphology measurements confirmed that even though after silver grafting the surface became more hydrophobic, the homogeneity increased and the flux reduction decreased after coating. Moreover a comparison between PVDF and PES revealed that CFU (colony forming units) reduced 64.5% on PVDF surface and 31.1% on PES surface after modification. In conclusion, PVD improved the performance of the membrane antibiofouling, and it is more promising to be used for PVDF rather than PES.

  3. Performance Investigation and Structure Optimization of a Flat Dual-Function Solar Collector

    Directory of Open Access Journals (Sweden)

    Jinwei Ma

    2015-01-01

    Full Text Available The performance of a dual-function solar collector (DFSC that can work as either water heater or air heater depending on seasonal requirement is investigated via both experimental and numerical approaches in this paper. The numerical results are well consistent with the experimental results. Daily efficiency of the thermosiphon system with DFSC is more than 55% in water heating mode and the instantaneous air heating efficiency of the collector reaches 60%. The effects of inner parameters on the thermal efficiency of the collector are analyzed by numerical simulations of the operation of DFSC in two working modes. It is found that the depths of the two air channels in DFSC have an optimal range suitable for both working modes. The thickness of back insulation should be no less than 0.06 m to prevent heat loss via backboard, and the diameter and number of copper tubes show notable effect on the efficiency of DFSC in water heating mode but slight effect in air heating mode.

  4. Investigation of phase stability and oxide ion performance in new perovskite-type bismuth vanadate

    International Nuclear Information System (INIS)

    Al-Alas, Ahlam; Beg, Saba; Al-Areqi, Niyazi A.S.

    2012-01-01

    Samples of the BICDVOX system, formulated as Bi 4 Cd x V 2−x O 11−(3x/2)−δ in the Cd substitution range 0 ≤ x ≤ 0.25 were synthesized using the standard solid state reaction.The correlation between phase stability and oxide ion performance were investigated by variable temperature XRPD, DSC and AC impedance spectroscopy. The substitution of V 5+ by Cd 2+ exhibited different phase transitions upon varying composition. For compositions with x ≤ 0.05, two successive transitions; α↔β↔γ are evident, while the β↔γ transition exists in the composition range 0.05 4+ → V 5+ re–oxidation results in increased defect trapping effects in the system at higher temperatures. -- Highlights: ► γ-Stabilized BICDVOX at lower dopant concentrations. ► Good oxide-ion conductivity at lower temperatures. ► High temperature-vanadium reduction with lower dopant concentrations.

  5. Experimental investigation for the optimization of heat pipe performance in latent heat thermal storage

    Energy Technology Data Exchange (ETDEWEB)

    Ladekar, Chandrakishor; Choudhary, S. K. [RTM Nagpur University, Wardha (India); Khandare, S. S. [B. D. College of Engineering, Wardha (India)

    2017-06-15

    We investigated the optimum performance of heat pipe in Latent heat thermal energy storage (LHTES), and compared it with copper pipe. Classical plan of experimentation was used to optimize the parameters of heat pipe. Heat pipe fill ratio, evaporator section length to condenser section length ratio i.e., Heat pipe length ratio (HPLR) and heat pipe diameter, was the parameter used for optimization, as result of parametric analysis. Experiment with flow rate of 10 lit./min. was conducted for different fill ratio, HPLR and different diameter. Fill ratio of 80 %, HPLR of 0.9 and heat pipe with diameter of 18 mm showed better trend in charging and discharging. Comparison between the storage tank with optimized heat pipe and copper pipe showed almost 186 % improvement in charging and discharging time compared with the copper pipe embedded thermal storage. Heat transfer between Heat transferring fluid (HTF) and Phase change material (PCM) increased with increase in area of heat transferring media, but storage density of storage tank decreased. Storage tank with heat pipe embedded in place of copper pipe is a better option in terms of charging and discharging time as well heat storage capacity due to less heat lost. This justifies the better efficiency and effectiveness of storage tank with embedded optimized heat pipe.

  6. Investigations of subterranean microorganisms. Their importance for performance assessment of radioactive waste disposal

    International Nuclear Information System (INIS)

    Pedersen, K.

    1995-06-01

    This report presents a broad and thorough description of how microorganisms may influence safety of repositories for radioactive waste. First, an overview of the Swedish concepts for disposal is given, including a discussion of the geological, chemical and hydrological conditions in repositories. Then the limiting and stimulating factors for life of microorganisms are reviewed, such as relations to oxygen, temperature, pH, radiation, pressure, water and nutrients availability. Bacteria in the cycles of carbon, nitrogen, sulfur, iron, manganese and hydrogen are also discussed. A literature review of subterranean bacteria is given in chapter 4. Chapter 5 treats investigations of microorganisms in repository-like environments, and microbial corrosion and redox processes relevant for materials in the repository and for the mobility of radionuclides. Possibilities to predict the activity and presence of microorganisms through mathematical models are discussed in chapter 6. Chapter 7 summarizes the conclusion drawn in the report, how microorganisms may influence performance safety assessment of radioactive waste disposal, and also identifies research needs. 293 refs, 43 figs, 36 tabs

  7. Experimental Investigation for Tensile Performance of GFRP-Steel Hybridized Rebar

    Directory of Open Access Journals (Sweden)

    Dong-Woo Seo

    2016-01-01

    Full Text Available Tensile performance of the recently developed “FRP Hybrid Bar” at Korea Institute of Civil Engineering and Building Technology (KICT is experimentally evaluated by the authors. FRP Hybrid Bar is introduced to overcome the low elastic modulus of the existing GFRP bars to be used as a structural member in reinforced concrete structures. The concept of material hybridization is applied to increase elastic modulus of GFRP bars by using steel. This hybridized GFRP bar can be used in concrete structures as a flexural reinforcement with a sufficient level of elastic modulus. In order to verify the effect of material hybridization on tensile properties, tensile tests are conducted. The test results for both FRP Hybrid Bar and the existing GFRP bars are compared. The results indicate that the elastic modulus of FRP Hybrid Bar can be enhanced by up to approximately 250 percent by the material hybridization with a sufficient tensile strength. To ensure the long-term durability of FRP Hybrid Bar to corrosion resistance, the individual and combined effects of environmental conditions on FRP Hybrid Bar itself as well as on the interface between rebar and concrete are currently under investigation.

  8. Experimental investigation on the thermal performance of a closed oscillating heat pipe in thermal management

    Science.gov (United States)

    Rao, Zhonghao; Wang, Qingchao; Zhao, Jiateng; Huang, Congliang

    2017-10-01

    To investigate the thermal performance of the closed oscillating heat pipe (OHP) as a passive heat transfer device in thermal management system, the gravitation force, surface tension, cooling section position and inclination angle were discussed with applied heating power ranging from 5 to 65 W. The deionized water was chosen as the working fluid and liquid-filling ratio was 50 ± 5%. The operation of the OHP mainly depends on the phase change of the working fluid. The working fluid within the OHP was constantly evaporated and cooled. The results show that the movement of the working fluid was similar to the forced damped mechanical vibration, it has to overcome the capillary resistance force and the stable oscillation should be that the OHP could successful startup. The oscillation frequency slowed and oscillation amplitude decreased when the inclination angle of the OHP increased. However, the thermal resistance increased. With the increment of the heating power, the average temperature of the evaporation and condensation section would be close. If the heating power was further increased, dry-out phenomenon within the OHP would appeared. With the decrement of the L, the start-up heating power also decreased and stable oscillation would be formed.

  9. Experimental investigation of thermal performance of a double-flow solar air heater having aluminium cans

    Energy Technology Data Exchange (ETDEWEB)

    Ozgen, Filiz; Esen, Mehmet; Esen, Hikmet [Department of Mechanical Education, Faculty of Technical Education, Firat University, 23119 Elazig (Turkey)

    2009-11-15

    This study experimentally investigates a device for inserting an absorbing plate made of aluminium cans into the double-pass channel in a flat-plate solar air heater (SAH). This method substantially improves the collector efficiency by increasing the fluid velocity and enhancing the heat-transfer coefficient between the absorber plate and air. These types of collectors had been designed as a proposal to use aluminium materials to build absorber plates of SAHs at a suitable cost. The collector had been covered with a 4-mm single glass plate, in order to reduce convective loses to the atmosphere. Three different absorber plates had been designed and tested for experimental study. In the first type (Type I), cans had been staggered as zigzag on absorber plate, while in Type II they were arranged in order. Type III is a flat plate (without cans). Experiments had been performed for air mass flow rates of 0.03 kg/s and 0.05 kg/s. The highest efficiency had been obtained for Type I at 0.05 kg/s. Also, comparison between the thermal efficiency of the SAH tested in this study with the ones reported in the literature had been presented, and a good agreement had been found. (author)

  10. Investigation of heterogeneous solid acid catalyst performance on low grade feedstocks for biodiesel production: A review

    International Nuclear Information System (INIS)

    Mansir, Nasar; Taufiq-Yap, Yun Hin; Rashid, Umer; Lokman, Ibrahim M.

    2017-01-01

    Highlights: • Solid acid catalysts are proficient to esterifying high free fatty acid feedstocks to biodiesel. • Heterogeneous catalysts have the advantage of easy separation and reusability. • Heterogeneous basic catalysts have limitations due to high FFA of low cost feedstocks. • Solid catalysts having acid and base sites reveal better catalyst for biodiesel production. - Abstract: The conventional fossil fuel reserves are continually declining worldwide and therefore posing greater challenges to the future of the energy sources. Biofuel alternatives were found promising to replace the diminishing fossil fuels. However, conversion of edible vegetable oils to biodiesel using homogeneous acids and base catalysts is now considered as indefensible for the future particularly due to food versus fuel competition and other environmental problems related to catalyst system and feedstock. This review has discussed the progression in research and growth related to heterogeneous catalysts used for biodiesel production for low grade feedstocks. The heterogeneous base catalysts have revealed effective way to produce biodiesel, but it has the limitation of being sensitive to high free fatty acid (FFA) or low grade feedstocks. Alternatively, solid acid catalysts are capable of converting the low grade feedstocks to biodiesel in the presence of active acid sites. The paper presents a comprehensive review towards the investigation of solid acid catalyst performance on low grade feedstock, their category, properties, advantages, limitations and possible remedy to their drawbacks for biodiesel production.

  11. Characterization and Antibiofouling Performance Investigation of Hydrophobic Silver Nanocomposite Membranes: A Comparative Study

    Directory of Open Access Journals (Sweden)

    Maryam Amouamouha

    2017-11-01

    Full Text Available Biofouling is one of the drawbacks restricting the industrial applications of membranes. In this study, different thicknesses of silver nanoparticles with proper adhesion were deposited on poly(vinylidenefluoride (PVDF and polyethersulfone (PES surfaces by physical vapor deposition (PVD. The crystalline and structural properties of modified and pure membranes were investigated by carrying out X-ray diffraction (XRD and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR. Scanning electron microscope (SEM and atomic force microscopy (AFM analyses were employed to examine the surface morphology and the bacteria anti-adhesion property of the membranes. The morphology measurements confirmed that even though after silver grafting the surface became more hydrophobic, the homogeneity increased and the flux reduction decreased after coating. Moreover a comparison between PVDF and PES revealed that CFU (colony forming units reduced 64.5% on PVDF surface and 31.1% on PES surface after modification. In conclusion, PVD improved the performance of the membrane antibiofouling, and it is more promising to be used for PVDF rather than PES.

  12. SPARTAN: a simple performance assessment code for the Nevada Nuclear Waste Storage Investigations Project

    International Nuclear Information System (INIS)

    Lin, Y.T.

    1985-12-01

    SPARTAN is a simple computer model designed for the Nevada Nuclear Waste Storage Investigations Project to calculate radionuclide transport in geologic media. The physical processes considered are limited to Darcy's flow, radionuclide decay, and convective transport with constant retardation of radionuclides relative to water flow. Inputs for the model must be provided for the geometry, repository area, flow path, water flux, effective porosity, initial inventory, waste solubility, canister lifetime, and retardation factors. Results from the model consist of radionuclide release rates from the prospective Yucca Mountain repository for radioactive waste and cumulative curies released across the flow boundaries at the end of the flow path. The rates of release from the repository relative to NRC performance objectives and releases to the accessible environment relative to EPA requirements are also calculated. Two test problems compare the results of simulations from SPARTAN with analytical solutions. The comparisons show that the SPARTAN solution closely matches the analytical solutions across a range of conditions that approximate those that might occur at Yucca Mountain

  13. Investigating the Dissolution Performance of Amorphous Solid Dispersions Using Magnetic Resonance Imaging and Proton NMR

    Directory of Open Access Journals (Sweden)

    Francesco Tres

    2015-09-01

    Full Text Available We have investigated the dissolution performance of amorphous solid dispersions of poorly water-soluble bicalutamide in a Kollidon VA64 polymeric matrix as a function of the drug loading (5% vs. 30% bicalutamide. A combined suite of state-of-the-art analytical techniques were employed to obtain a clear picture of the drug release, including an integrated magnetic resonance imaging UV-Vis flow cell system and 1H-NMR. Off-line 1H-NMR was used for the first time to simultaneously measure the dissolution profiles and rates of both the drug and the polymer from a solid dispersion. MRI and 1H-NMR data showed that the 5% drug loading compact erodes linearly, and that bicalutamide and Kollidon VA64 are released at approximately the same rate from the molecular dispersion. For the 30% extrudate, data indicated a slower water ingress into the compact which corresponds to a slower dissolution rate of both bicalutamide and Kollidon VA64.

  14. Performance Investigation of a Full-Scale Hybrid Composite Bull Gear

    Science.gov (United States)

    LaBerge, Kelsen; Handschuh, Robert; Roberts, Gary; Thorp, Scott

    2016-01-01

    Hybrid composite gears have been investigated as a weight saving technology for rotorcraft transmissions. These gears differ from conventional steel gears in that the structural material between the shaft interface and the gear rim is replaced with a lightweight carbon fiber composite. The work discussed here is an extension of previous coupon level hybrid gear tests to a full-scale bull gear. The NASA Glenn Research Center High-Speed Helical Gear Rig was modified for this program allowing several hybrid gear web configurations to be tested while utilizing the same gear rim. Testing was performed on both a baseline (steel) web configuration and a hybrid (steel-composite)configuration. Vibration, orbit and temperature data were recorded and compared between configurations. Vibration levels did not differ greatly between the hybrid and steel configurations, nor did temperature differential between inlet and outlet. While orbit shape displayed differences between the hybrid and baseline configurations, the general overall amplitude was comparable. The hybrid configuration discussed here successfully ran at 3300 hp(2,460 kW), however, progressive growth of the orbit while running at this test condition discontinued the test. Researchers continue to search for the cause of this orbit shift.

  15. Investigations of subterranean microorganisms. Their importance for performance assessment of radioactive waste disposal

    Energy Technology Data Exchange (ETDEWEB)

    Pedersen, K [Goeteborg Univ. (Sweden). General and Marine Microbiology; Karlsson, Fred [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)

    1995-06-01

    This report presents a broad and thorough description of how microorganisms may influence safety of repositories for radioactive waste. First, an overview of the Swedish concepts for disposal is given, including a discussion of the geological, chemical and hydrological conditions in repositories. Then the limiting and stimulating factors for life of microorganisms are reviewed, such as relations to oxygen, temperature, pH, radiation, pressure, water and nutrients availability. Bacteria in the cycles of carbon, nitrogen, sulfur, iron, manganese and hydrogen are also discussed. A literature review of subterranean bacteria is given in chapter 4. Chapter 5 treats investigations of microorganisms in repository-like environments, and microbial corrosion and redox processes relevant for materials in the repository and for the mobility of radionuclides. Possibilities to predict the activity and presence of microorganisms through mathematical models are discussed in chapter 6. Chapter 7 summarizes the conclusion drawn in the report, how microorganisms may influence performance safety assessment of radioactive waste disposal, and also identifies research needs. 293 refs, 43 figs, 36 tabs.

  16. Theory of high frequency discharge in gases under low pressures. Experimental investigation of high-frequency type ion sources; Theorie de la decharge haute frequence dans les gaz aux faibles pressions. Etude experimentale des sources d'ions du type haute frequence

    Energy Technology Data Exchange (ETDEWEB)

    Salmon, Jean

    1955-03-02

    The first part of this research thesis addresses the theory of high frequency discharge in gases under low pressures, and first proposes a calculation of the distribution function for electrons present within the gas. The author then studies the evolution of electron density within a discharge tube by assigning the governing role in electron multiplication to the secondary emission of tube walls. The second part proposes a detailed description of a source operating at 96.5 Mc/s, a discussion of measurements performed on this source, and the search for a theoretical explanation of some of its properties. The author then briefly analyses various existing types of high frequency sources, and finally discusses their use in corpuscular microscopy and in particle accelerators [French] La presente these comprend deux parties. La premiere est consacree a la theorie de la decharge haute frequence dans les gaz aux faibles pressions et comporte tout d'abord le calcul de la fonction de distribution des electrons presents au sein du gaz. Nous etudions ensuite l'evolution de la densite electronique a l'interieur d'un tube a decharge en attribuant, a l'emission secondaire des parois de ce dernier, le role essentiel dans la multiplicalion des electrons. Nous obtenons ainsi les conditions d'amorcage. Tout au long de cette etude, on doit distinguer soigneusement le cas ou le libre parcours moyen des electrons dans le gaz est inferieur aux dimensions de l'enceinte et le cas ou il leur est superieur. La deuxieme partie comprend la description detaillee d'une source fonctionnant sur 96.5 Mc/s, l'expose des mesures effectuees sur celle-ci et la recherche d'une explication theorique de certaines de ses proprietes. Nous faisons ensuite une breve analyse des divers types de sources d'ions haute frequence existant a l'heure actuelle et nous terminons en traitant de leur utilisation en microscopie corpusculaire et dans les accelerateurs de particules.

  17. Collaborative crew performance in complex operational systems: L'Efficacité du travail en équipage dans des systèmes opérationnel complexes

    National Research Council Canada - National Science Library

    1999-01-01

    .... As we progress towards the next millennium, complex operations will increasingly require consideration and integration of the collaborative element wherein crew performance becomes a critical factor for success...

  18. Implementation Cryptography Data Encryption Standard (DES) and Triple Data Encryption Standard (3DES) Method in Communication System Based Near Field Communication (NFC)

    Science.gov (United States)

    Ratnadewi; Pramono Adhie, Roy; Hutama, Yonatan; Saleh Ahmar, A.; Setiawan, M. I.

    2018-01-01

    Cryptography is a method used to create secure communication by manipulating sent messages during the communication occurred so only intended party that can know the content of that messages. Some of the most commonly used cryptography methods to protect sent messages, especially in the form of text, are DES and 3DES cryptography method. This research will explain the DES and 3DES cryptography method and its use for stored data security in smart cards that working in the NFC-based communication system. Several things that will be explained in this research is the ways of working of DES and 3DES cryptography method in doing the protection process of a data and software engineering through the creation of application using C++ programming language to realize and test the performance of DES and 3DES cryptography method in encrypted data writing process to smart cards and decrypted data reading process from smart cards. The execution time of the entering and the reading process data using a smart card DES cryptography method is faster than using 3DES cryptography.

  19. Screening phytochimique et identification spectroscopique des ...

    African Journals Online (AJOL)

    Origin

    plante, effectuée pour la première fois, a révélé la présence des alcaloïdes, des flavonoïdes, des tanins catéchiques, des terpènes, des coumarines et des composés cyanogénétiques. Quant aux saponines et les quinones libres, ils sont présents chez les fleurs et absents chez les feuilles. La caractérisation des molécules.

  20. Efficacité des néonicotinoïdes et des pyréthrinoïdes utilisés contre le ...

    African Journals Online (AJOL)

    Efficacité des néonicotinoïdes et des pyréthrinoïdes utilisés contre le foreur des tiges du cacaoyer ( Eulophonotus myrmeleon Felder : Lepidoptera, Cossidae). Implications dans la stratégie de protection de la cacaoculture en Côte d'Ivoire.

  1. Investigating the performance of directional boundary layer model through staged modeling method

    Science.gov (United States)

    Jeong, Moon-Gyu; Lee, Won-Chan; Yang, Seung-Hune; Jang, Sung-Hoon; Shim, Seong-Bo; Kim, Young-Chang; Suh, Chun-Suk; Choi, Seong-Woon; Kim, Young-Hee

    2011-04-01

    BLM since the feasibility of the BLM has been investigated in many papers[4][5][6]. Instead of fitting the parameters to the wafer critical dimensions (CD) directly, we tried to use the aerial image (AI) from the rigorous simulator with the electromagnetic field (EMF) solver. Usually that kind of method is known as the staged modeling method. To see the advantages of this method we conducted several experiments and observed the results comparing the method of fitting to the wafer CD directly. Through the tests we could observe some remarkable results and confirmed that the staged modeling had better performance in many ways.

  2. An experimental investigation of Perkins A63544 diesel engine performance using D-Series fuel

    International Nuclear Information System (INIS)

    Hassan-beygi, Seyed Reza; Istan, Vahideh; Ghobadian, Barat; Aboonajmi, Mohammad

    2013-01-01

    Highlights: • The performance of a diesel engine was evaluated using newly developed D-Series fuel. • The specifications of D-Series fuel were in the range of ASTM D-6751-09 standard. • The D-Series fuel did not change the engine power and torque significantly except the D 65 B 25 E 10 fuel blend. • The D-Series fuel blends increased the engine specific fuel consumption compare with neat-diesel fuel. • The D 93 B 5 E 2 fuel blend could be suggested as an appropriate alternative for neat petro-diesel fuel. - Abstract: This paper reports the results of an investigation using a newly developed fuel mixture called ‘D-Series fuel’ on a Perkins A63544 direct injection diesel engine. The biodiesel and bioethanol fuels were added to diesel fuel in a manner that specifications of the formed mixture did not change considerably. The performance of the engine under test was then evaluated without any modification or change in engine components and systems using the D-Series fuel. The obtained data was statistically analyzed using two factors completely randomized design to study the effects of the engine speeds and fuel blend types on the engine power, torque, and specific fuel consumption. The analysis of variance showed that the engine speeds and fuel types had statistically significant effects at 1% probability level (P 65 B 25 E 10 , 65% diesel, 25% biodiesel and 10% bioethanol, blend which decreased the engine power. The engine torque was decreased with increasing the engine speed for all the fuel blends in range of 319–296 N m. The maximum torque reduction was about 25 N m for neat petro-diesel fuel. The engine torque was decreased significantly (P 93 B 5 E 2 fuel blend could be suggested as an appropriate alternative for neat petro-diesel fuel, though the D 86 B 10 E 4 and D 79 B 15 E 6 blends could be also suggested for greater ratios of biodiesel and bioethanol application in D-Series fuel application

  3. The Use of the Moessbauer Effect in Investigating the Chemical Effects of Nuclear Transmutations in Oxygenous Compounds of Manganese and Tin; Utilisation de l'Effet Moessbauer pour l'Etude des Effets Chimiques des Transformations Nucleaires dans les Composes de Manganese et d'Etain; 0418 0421 0421 041b 0415 0414 ; Empleo del Efecto Moessbauer para Investigar las Transformaciones Nucleares de Compuestos Oxigenados de Estano y de Manganeso

    Energy Technology Data Exchange (ETDEWEB)

    Nesmejanov, An. N.; Babeshkin, A. M.; Kosev, N. P.; Bekker, A. A.; Lebedev, V. A. [Moskovskij Gosudarstvennyj Universitet Im. M.V. Lomonosova, Moskva, SSSR (Russian Federation)

    1965-04-15

    The customary methods of studying the chemical state of recoil atoms, i. e. those connected with phase transitions (chemical analysis, chromatography, electrophoresis) and also the annealing technique, permit only indirect judgments as to the stabilization mechanism of hot atoms. In analysis with the method of resonance absorption of non-recoil gamma-quanta, no changes are introduced into the sample that could influence the forms of stabilization, even where stability is not very great. In the present study we investigated the forms of stabilization of Mn56 recoil atoms in irradiated solutions and solid samples of permanganate, and of Sn{sup 119m} recoil atoms in stannic oxide and stannous oxide. The permanganate samples were irradiated in a paraffin block with a polonium-beryllium source at a neutron flux of 10{sup 7} - 10{sup 8} n/cm{sup 2}. s. The hot Mn{sup 56} atoms are formed in the +7, +4 and lower valency states. From samples (SnO and SnO{sub 2}) irradiated in a reactor for 1800 h at a flux of 2.2 x 10{sup 13} n/cm{sup 2}. s, sources were prepared directly for a study of the resonance absorption of gamma-quanta in an apparatus operating at constant speed. Suitable compounds of tin were used as absorbers. The Sn{sup 119m} recoil atoms were detected only in the +4-valency state. The data obtained are taken as the basis for a discussion of the stabilization mechanism of recoil atoms. (author) [French] Les methodes habituellement appliquees pour etudier l'etat chimique des atomes de recul (analyse chimique, chromatographie, electro- phorese) sont liees, comme le recuit, aux transitions de phases et ne permettent de determiner le mecanisme de stabilisation des atomes chauds que d'une facon indirecte. Lorsque l'analyse est faite au moyen d'une methode fondee sur l'absorption par resonance des phonons sans recul, l'echantillon ne subit aucune modification pouvant exercer une influence sur les formes de stabilisation, meme si ces formes sont peu durables. Les

  4. Investigations of the corrosion behaviour of special heat exchanging materials in sodium acetate trihydrate melt for the application latent heat storage; Untersuchungen des Korrosionsverhaltens ausgewaehlter Waermeaustauscherwerkstoffe in Natriumacetat-Trihydrat-Schmelze fuer den Anwendungsfall Latentwaermespeichersysteme

    Energy Technology Data Exchange (ETDEWEB)

    Brandt, B.; Stimming, U. [ZAE Bayern, Walter-Meissner-Str. 6, 87748 Garching (Germany)

    2004-06-01

    The development activities in the area of latent heat storage have more and more increased in the last years. The reason is the search for new energy storage systems of higher energy efficiency and the reinforced utilisation of renewable and alternative energies which are often only irregularly available. The special advantage of latent heat storage is the high energy storage density which could be reached at the melting point of selected storage materials and the resulting reduction of required space respectively the nearly constant temperature. An important topic relating to the development of these storage systems was the investigation of the long time stability, especially the corrosion stability. At the same time the heat exchange material has the function to transfer the heat and coldness from a heat transfer medium, e. g. water which has drawn the energy from an external source to the storage material. Among the storage materials the sodium acetate trihydrate (melting point: 58 C) has interesting advantages. In that reason the investigation of the corrosion behaviour and the choose of suitable materials for heat exchangers was an important goal. In the present report important results of the investigation of selected metals at 80 C in sodium acetate trihydrate are described. The corrosion influencing impurities chloride, sulphate and carbonate which could be contained in the much more inexpensive salt hydrate of technical quality were added to the analytically pure sodium acetate trihydrate. Furthermore the addition of graphite (for increasing the heat conductivity) and the contact with air were investigated. Some promising metals of high corrosion resistance are the result of the investigations. (Abstract Copyright [2004], Wiley Periodicals, Inc.) [German] In den letzten Jahren haben sich die Entwicklungsaktivitaeten auf dem Gebiet der Latentwaermespeicherung erheblich verstaerkt. Grund dafuer ist die Suche nach Energiespeichern mit hoeherer Effizienz und

  5. Investigating the Performance of the MPT Multipath Communication Library in IPv4 and IPv6

    Directory of Open Access Journals (Sweden)

    Béla Almási

    2016-01-01

    Full Text Available The currently used mobile devices (laptops, tablets, mobile phones contain many built-in network cards for communication (e.g. Wi-Fi, 3G, Bluetooth, etc.. A natural request could be combining the resources of the different network connection possibilities in order to increase the throughput of the communication. Unfortunately the standard IP communication technology does not support it: the communication is restricted to one IP address (i.e. to one interface. The Multipath TCP (MPTCP specification (appeared in January 2013 offers a Transport layer solution of using more than one interface in a TCP communication session. In this paper we investigate a Network layer solution. The MPT multipath communication library opens the multipath communication possibility in the Network layer. Using the MPT library, applications built on the UDP protocol are also able to perform multipath communication. The MPT library was developed by using a full dual-stack technology, which means the MPT based multipath environment can be used both in IPv4 and IPv6. Protocol version change is also possible: an IPv6 based application is able to run in an IPv4 multipath environment, and an IPv4 application can be used in an IPv6 multipath environment. In this paper we give a short overview on the MPT communication library’s working mechanism and detailed numerical examples will be shown to present how the MPT library aggregates the paths’ throughput in IPv4 and IPv6 environments. The main contribution of the paper is to demonstrate the effective throughput aggregation property of the MPT library in IPv6 and in mixed (i.e. protocol version change environments.

  6. Investigation of fuel lattice pitch changes influence on reactor performance through evaluate the neutronic parameters

    International Nuclear Information System (INIS)

    Zareian Ronizi, F.; Fadaei, A.H.; Setayeshi, S.; Shahidi, A.R.

    2015-01-01

    Highlights: • One of the most complex issues that Nu-engineers deal with is the design of NR core. • Numerous factors in nuclear core design depend on Fuel-to-Moderator volume ratio. • Aim of this research is to investigate RX performance for different lattice pitches. - Abstract: Nuclear reactor core design is one of the most complex issues that nuclear engineers deal with. The number and complexity of effective parameters and their impact on reactor design, which makes the problem difficult to solve, require precise knowledge of these parameters and their influence on the reactor operation. Numerous factors in a nuclear reactor core design depend on the Fuel-to-Moderator volume ratio, V F /V M , in a fuel cell. This ratio can be modified by changing the lattice pitch which is the thickness of water channels between fuels plates while keeping fuel slab dimensions fixed. Cooling and moderating properties of water are affected by such a change in a reactor core, and hence some parameters related to these properties might be changed. The aim of this research is to provide the suitable knowledge for nuclear core designing. To reach this goal, the first operating core of Tehran Research Reactor (TRR) with different lattice pitches is simulated, and the effect of different lattice pitches on some parameters such as effective multiplication factor (K eff ), reactor life time, distribution of neutron flux and power density in the core, as well as moderator temperature and density coefficient of reactivity are evaluated. The nuclear reactor analysis code, MTR-PC package is employed to carry out the considered calculation. Finally, the results are presented in some tables and graphs that provide useful information for nuclear engineers in the nuclear reactor core design

  7. Relations Between Stressors and Job Performance: An Aggregate-Level Investigation Using Multiple Criterion Measures

    National Research Council Canada - National Science Library

    Thomas, Jeffrey

    2002-01-01

    .... Army Combat Brigades. Unlike previous studies that have focused exclusively on in-role performance, we examined relations between stressors and multiple performance criterion measures, which corresponded to in-role...

  8. La gestion des résultats des entreprises innovantes

    OpenAIRE

    Dumas, Guillaume

    2014-01-01

    Cette thèse s’intéresse à la gestion des résultats dans le cadre des entreprises innovantes. Elle est constituée de trois articles. Dans le premier, il s’agit d’examiner si les résultats des entreprises innovantes sont gérés et si le stade de développement des innovations influence cette gestion des résultats. Il apparaît que les résultats des entreprises innovantes sont gérés à la hausse. Cette gestion ne semble intervenir qu’au cours de l’activité d’innovation (c’est-à-dire lorsque les entr...

  9. Investigation and Analysis of Hemoglobin A1c Measurement Systems' Performance for 135 Laboratories in China

    Directory of Open Access Journals (Sweden)

    Hai-Jian Zhao

    2017-01-01

    Conclusions: This study indicated that, although participating laboratories were laboratories with better performance in China, the performances were still unsatisfactory. Actions should be taken to improve HbA1c measurement performance before we can include HbA1c assays in diabetes diagnosis in China.

  10. Caractéristiques physiques et nutritionnelles des blocs multi ...

    African Journals Online (AJOL)

    Pour maintenir les performances des animaux notamment en saison sèche, et satisfaire la demande sans cesse croissante en protéines animales, il s'avère nécessaire de trouver des pratiques alimentaires qui permettront d'éviter la pénurie alimentaire. En Afrique de l'Ouest, le secteur agricole et agro-alimentaire génèrent ...

  11. Consumption of artificially and sugar-sweetened beverages and incident type 2 diabetes in the Etude Epidemiologique aupres des femmes de la Mutuelle Generale de l'Education Nationale-European Prospective Investigation into Cancer and Nutrition cohort.

    Science.gov (United States)

    Fagherazzi, Guy; Vilier, Alice; Saes Sartorelli, Daniela; Lajous, Martin; Balkau, Beverley; Clavel-Chapelon, Françoise

    2013-03-01

    It has been extensively shown, mainly in US populations, that sugar-sweetened beverages (SSBs) are associated with increased risk of type 2 diabetes (T2D), but less is known about the effects of artificially sweetened beverages (ASBs). We evaluated the association between self-reported SSB, ASB, and 100% fruit juice consumption and T2D risk over 14 y of follow-up in the French prospective Etude Epidémiologique auprès des femmes de la Mutuelle Générale de l'Education Nationale-European Prospective Investigation into Cancer and Nutrition cohort. A total of 66,118 women were followed from 1993, and 1369 incident cases of T2D were diagnosed during the follow-up. Cox regression models were used to estimate HRs and 95% CIs for T2D risk. The average consumption of sweetened beverages in consumers was 328 and 568 mL/wk for SSBs and ASBs, respectively. Compared with nonconsumers, women in the highest quartiles of SSB and ASB consumers were at increased risk of T2D with HRs (95% CIs) of 1.34 (1.05, 1.71) and 2.21 (1.56, 3.14) for women who consumed >359 and >603 mL/wk of SSBs and ASBs, respectively. Strong positive trends in T2D risk were also observed across quartiles of consumption for both types of beverage (P = 0.0088 and P < 0.0001, respectively). In sensitivity analyses, associations were partly mediated by BMI, although there was still a strong significant independent effect. No association was observed for 100% fruit juice consumption. Both SSB consumption and ASB consumption were associated with increased T2D risk. We cannot rule out that factors other than ASB consumption that we did not control for are responsible for the association with diabetes, and randomized trials are required to prove a causal link between ASB consumption and T2D.

  12. Impact de la motivation et des caractéristiques individuelles sur la performance : application dans le monde académique

    OpenAIRE

    Chédru, Marie

    2012-01-01

    Among the wide range of factors influencing students’ performance, what are the roles of motivation and individual differences? This study focuses on three research questions: (1) How can motivation and students’ individual preferences be conceptualized? (2) Depending on the curriculum, are graduate students characterized by specific profiles? (3) What are the relative contributions of individual differences and motivation in predicting academic performance? Based on self-determination theory...

  13. Des dispositions responsables à prendre pour la protection des ...

    African Journals Online (AJOL)

    En considérant l'effet néfaste des maladies, des parasites, du changement climatique et d'autres facteurs environnementaux (les OGM par exemple) sur la survie des abeilles, la baisse de leurs populations dans certaines parties du monde ne saurait être attribuée aux seules pesticides. En plus, l'impact de ces derniers sur ...

  14. Aspects des Onychomycoses chez des patients camerounais de ...

    African Journals Online (AJOL)

    ... biologiques et évolutifs des onychomycoses chez des patients camerounais. Méthode : Il s'agit d'une étude rétrospective et descriptive menée de mars 2011 à mars 2014 dans l'unité de dermatologie de l'hôpital général de Douala (HGD), incluant des patients chez lesquels le diagnostic d'onychomycose avait été posé.

  15. Assessment of radioactivity controls performed by the IRSN on enamels pigmented by uranium and recommendations related to the use of radiation meters by the public; Bilan des controles de radioactivite effectues par l'IRSN sur des emaux pigmentes par de l'uranium et recommandations relatives a l'emploi de radiametres par des personnes du public

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-09-15

    This information note reports the results of measurements performed by the IRSN on enamel pictures possessed by a Limoges inhabitant who bought a radiometer and measured an unusually high radioactivity level due to the presence of uranium-based yellow pigments. The performed measurements are described and the results are discussed in terms of radioactivity level and of radionuclide identification

  16. Usages des TIC et socialisation professionnelle des enseignants-chercheurs

    OpenAIRE

    Lavielle-Gutnik, Nathalie; Massou, Luc

    2013-01-01

    En prenant appui sur une nouvelle analyse des données recueillies dans l’enquête Tec-Meus (2008-2011, MSH Lorraine) sur la place accordée par des enseignants-chercheurs en sciences humaines et sociales aux technologies de l’information et de la communication (TIC) dans leur activité d’enseignement, nous souhaitons nous focaliser dans cet article sur la compréhension des processus de socialisation professionnelle en jeu dans leur usage déclaré des TIC. Par socialisation professionnelle, nous e...

  17. Exploring the motivation jungle: predicting performance on a novel task by investigating constructs from different motivation perspectives in tandem.

    Science.gov (United States)

    Van Nuland, Hanneke J C; Dusseldorp, Elise; Martens, Rob L; Boekaerts, Monique

    2010-08-01

    Different theoretical viewpoints on motivation make it hard to decide which model has the best potential to provide valid predictions on classroom performance. This study was designed to explore motivation constructs derived from different motivation perspectives that predict performance on a novel task best. Motivation constructs from self-determination theory, self-regulation theory, and achievement goal theory were investigated in tandem. Performance was measured by systematicity (i.e. how systematically students worked on a problem-solving task) and test score (i.e. score on a multiple-choice test). Hierarchical regression analyses on data from 259 secondary school students showed a quadratic relation between a performance avoidance orientation and both performance outcomes, indicating that extreme high and low performance avoidance resulted in the lowest performance. Furthermore, two three-way interaction effects were found. Intrinsic motivation seemed to play a key role in test score and systematicity performance, provided that effort regulation and metacognitive skills were both high. Results indicate that intrinsic motivation in itself is not enough to attain a good performance. Instead, a moderate score on performance avoidance, together with the ability to remain motivated and effectively regulate and control task behavior, is needed to attain a good performance. High time management skills also contributed to higher test score and systematicity performance and a low performance approach orientation contributed to higher systematicity performance. We concluded that self-regulatory skills should be trained in order to have intrinsically motivated students perform well on novel tasks in the classroom.

  18. Amélioration de la résistance à l'usure des outils de travail des ...

    African Journals Online (AJOL)

    SARAH

    30 nov. 2014 ... différents types de disques expérimentaux montés sur un pulvériseur de ... une méthode de mesure de l'usure linéaire et de la forme des disques lors des tests de performance après ..... État de l'auto-organisation du sol et de.

  19. Investigating the Influences of Core Self-Evaluations, Job Autonomy, and Intrinsic Motivation on In-Role Job Performance

    Science.gov (United States)

    Joo, Baek-Kyoo; Jeung, Chang-Wook; Yoon, Hea Jun

    2010-01-01

    This study investigates the effects of core self-evaluations, job autonomy, and intrinsic motivation on employees' perceptions of their in-role job performance, based on a cross-sectional survey of 283 employees in a Fortune Global 100 company in Korea. The results suggest that employees perceived higher in-role job performance when they had…

  20. An Investigation of Boys' and Girls' Emotional Experience of Math, Their Math Performance, and the Relation between These Variables

    Science.gov (United States)

    Erturan, Selin; Jansen, Brenda

    2015-01-01

    Gender differences in children's emotional experience of math, their math performance, and the relation between these variables were investigated in two studies. In Study 1, test anxiety, math anxiety, and math performance (whole-number computation) were measured in 134 children in grades 3-8 (ages 7-15 years). In Study 2, perceived math…