Fitting diameter distribution models to data from forest inventories with concentric plot design

Energy Technology Data Exchange (ETDEWEB)

Nanos, N.; Sjöstedt de Luna, S.

2017-11-01

Aim: Several national forest inventories use a complex plot design based on multiple concentric subplots where smaller diameter trees are inventoried when lying in the smaller-radius subplots and ignored otherwise. Data from these plots are truncated with threshold (truncation) diameters varying according to the distance from the plot centre. In this paper we designed a maximum likelihood method to fit the Weibull diameter distribution to data from concentric plots. Material and methods: Our method (M1) was based on multiple truncated probability density functions to build the likelihood. In addition, we used an alternative method (M2) presented recently. We used methods M1 and M2 as well as two other reference methods to estimate the Weibull parameters in 40000 simulated plots. The spatial tree pattern of the simulated plots was generated using four models of spatial point patterns. Two error indices were used to assess the relative performance of M1 and M2 in estimating relevant stand-level variables. In addition, we estimated the Quadratic Mean plot Diameter (QMD) using Expansion Factors (EFs). Main results: Methods M1 and M2 produced comparable estimation errors in random and cluster tree spatial patterns. Method M2 produced biased parameter estimates in plots with inhomogeneous Poisson patterns. Estimation of QMD using EFs produced biased results in plots within inhomogeneous intensity Poisson patterns. Research highlights:We designed a new method to fit the Weibull distribution to forest inventory data from concentric plots that achieves high accuracy and precision in parameter estimates regardless of the within-plot spatial tree pattern.

Neutron spectrometric methods for core inventory verification in research reactors

International Nuclear Information System (INIS)

Ellinger, A.; Filges, U.; Hansen, W.; Knorr, J.; Schneider, R.

2002-01-01

In consequence of the Non-Proliferation Treaty safeguards, inspections are periodically made in nuclear facilities by the IAEA and the EURATOM Safeguards Directorate. The inspection methods are permanently improved. Therefore, the Core Inventory Verification method is being developed as an indirect method for the verification of the core inventory and to check the declared operation of research reactors

Some practical aspects of designing a large inventory

Science.gov (United States)

Kim Iles

2000-01-01

Designing a large multiresource inventory is horribly difficult, it is not work for faint hearts, and the 250,000,000-acre size of British Columbia is not a trivial problem. Completion of the details (as opposed to stopping the work) is a process prone to collapse. After that point, implementation is also likely to fail.

Summary report of second IAEA research coordination meeting on tritium inventory in fusion reactors

International Nuclear Information System (INIS)

Clark, R.E.H.

2006-03-01

Detailed discussions were held during an RCM at IAEA Headquarters on 18-19 October 2004 to review the progress made in the CRP on 'Tritium Inventory in Fusion Reactors'. Participants summarized the specific results obtained during the initial phase of the Coordinated Research Project (CRP), and considered the impact of the data generated on the design of fusion devices. Areas with further research needs were identified, and a set of outstanding objectives was formulated for the continuation of the CRP. The discussions, conclusions and recommendations of the RCM are briefly described in this report. (author)

Design of books inventory with RFID antenna in library management system

Directory of Open Access Journals (Sweden)

Cheng Ching-Chien

2017-01-01

Full Text Available A 915 MHz printed radio-frequency-identification (RFID antennas with the characteristics of good gain and omnidirectional beam wave is constructed and evaluated in this study. The objective is to find out their best reading rates for providing effective wireless communications among RFID antenna during the library book inventory process. And an optimal library inventory system which is based on electromagnetic identification (EMID technology is proposed, which is constructed to find the optimal tag location for a book, test the tag readability for bookshelves, and connect a couple of multi-layer bookshelves with multiplexers and updat the tag reading status in the database of the computer terminal. The fabricated antenna reader and the proposed system are embedded into different locations of bookshelves and tested at the library of Cheng Shiu University in Taiwan. According to the experimental results, the designed prototype of the antenna reader has the characteristics of the directional radiation pattern, good gain, simple shape, low cost and is easy to be integrated into the bookshelf. And the designed library inventory system can authenticate the location of a book automatically. They can benefit administrating librarians with the capabilities of decreasing the library inventory processing time and reducing the possibility of the books being misplaced.

Inventory of Dutch National Research on Global Climate Change: Inside and outside the National Research Programme

International Nuclear Information System (INIS)

Smythe, K.D.; Bernabo, C.; Kingma, J.; Vrakking, W.

1993-04-01

This summary of Dutch research on global climate change was compiled from a survey of the major research organisations in the Netherlands. The scope and structure of the survey and this report were based on a request for information from the World Meteorological Organisation for an intergovernmental meeting on the World Climate Programme (WCP) held (from 14 to 16 April 1993). The WMO request emphasized activities related to the WCP and its associated programmes. To extend the usefulness of the exercise, an attempt has been made to broaden the focus to give additional attention to the Intergovernmental Geosphere-Biosphere Programme (IGBP) and the Human Dimensions Programme (HDP). This was the first attempt to inventory the research projects on global climate change underway in the Netherlands - both inside and outside the National Research Programme. Other surveys on Dutch climate-related research have been conducted. The most extensive effort was a cataloging of publications from climate research in the Netherlands from 1981 to 1991, which was conducted by the Netherlands Royal Academy of Sciences (KNAW). That inventory is being updated to include publications through 1992. The database resulting from this exercise will be a useful tool for organisations sponsoring and conducting global climate change research in their efforts to stimulate cooperation and promote coordination among research groups in the Netherlands and abroad. There are plans to update the inventory in the future and to provide the information to participating Dutch organisations as well as research organisations in other countries. An overview of the current research is provided in Volume 1 with a list of projects

Standard High Solids Vessel Design De-inventory Simulant Qualification

Energy Technology Data Exchange (ETDEWEB)

Fiskum, Sandra K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burns, Carolyn A.M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gauglitz, Phillip A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Linn, Diana T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Peterson, Reid A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smoot, Margaret R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2017-09-12

The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is working to develop a Standard High Solids Vessel Design (SHSVD) process vessel. To support testing of this new design, WTP engineering staff requested that a Newtonian simulant be developed that would represent the de-inventory (residual high-density tank solids cleanout) process. Its basis and target characteristics are defined in 24590-WTP-ES-ENG-16-021 and implemented through PNNL Test Plan TP-WTPSP-132 Rev. 1.0. This document describes the de-inventory Newtonian carrier fluid (DNCF) simulant composition that will satisfy the basis requirement to mimic the density (1.18 g/mL ± 0.1 g/mL) and viscosity (2.8 cP ± 0.5 cP) of 5 M NaOH at 25 °C.1 The simulant viscosity changes significantly with temperature. Therefore, various solution compositions may be required, dependent on the test stand process temperature range, to meet these requirements. Table ES.1 provides DNCF compositions at selected temperatures that will meet the density and viscosity specifications as well as the temperature range at which the solution will meet the acceptable viscosity tolerance.

Land, Oil Spill, and Waste Management Research Publications in the Science Inventory

Science.gov (United States)

Resources from the Science Inventory database of EPA's Office of Research and Development, as well as EPA's Science Matters journal, include research on managing contaminated sites and ground water modeling and decontamination technologies.

Inventory of Federal energy-related environment and safety research for FY 1978. Volume 1. Executive summary

International Nuclear Information System (INIS)

1979-12-01

The FY 1978 Federal Inventory is a compilation of 3225 federally funded energy-related environmental and safety reserch projects. It consists of three volumes: an executive summary providing an overview of the data (Volume I), a catalog listing each Inventory project followed by series of indexes (Volume II), and an interactive terminal guide giving instructions for on-line data retrieval (Volume III). Volume I reviews the inventory data as a whole and also within each of three major categories: biomedical and environmental research, environmental control technology research, and operational safety research

Solving a Novel Inventory Location Model with Stochastic Constraints and (R,s,S Inventory Control Policy

Directory of Open Access Journals (Sweden)

Guillermo Cabrera

2013-01-01

Full Text Available We solve a novel inventory-location model with a stochastic capacity constraint based on a periodic inventory control (ILM-PR policy. The ILM-PR policy implies several changes with regard to other previous models proposed in the literature, which consider continuous review as their inventory policy. One of these changes is the inclusion of the undershoot concept, which has not been considered in previous ILM models in the literature. Based on our model, we are able to design a distribution network for a two-level supply chain, addressing both warehouse location and customer assignment decisions, whilst taking into consideration several aspects of inventory planning, in particular, evaluating the impact of the inventory control review period on the network configuration and system costs. Because the model is a very hard-to solve combinatorial nonlinear optimisation problem, we implemented two heuristics to solve it, namely, Tabu Search and Particle Swarm Optimisation. These approaches were tested over small instances in which they were able to find the optimal solution in just a few seconds. Because the model is a new one, a set of medium-size instances is provided that can be useful as a benchmark in future research. The heuristics showed a good convergence rate when applied to those instances. The results confirm that decision making over the inventory control policy has effects on the distribution network design.

Design Research between Design and Research

DEFF Research Database (Denmark)

Steinø, Nicolai; Markussen, Thomas

2011-01-01

The discourse on architecture and design research in Denmark in the past thirty years has been stuck in a unproductive dichotomy between research through design on the one hand and a phantom image of academic and theoretical, word-based research on the other. Advocates of the research through...... design strand have argued, that architecture and design research must follow an architecture and design methodology – designing – and be communicated by means of architecture and design media – images and artefacts. Essentially, this view sees no difference between architecture and design research...... and practice, as expressed in the notion of research as ‘artistic innovation work’. On the other hand, the pressure to expand research in architecture and design has seen a movement towards adopting traditional research paradigms from the technical and social sciences and humanities. For many architects...

Changing an automated drug inventory control system to a data base design.

Science.gov (United States)

Bradish, R A

1982-09-01

A pharmacy department's change from indexed sequential access files to a data base management system (DBMS) for purposes of automated inventory control is described. The DBMS has three main functional areas: (1) inventory ordering and accountability, (2) charging of interdepartmental and intradepartmental orders, and (3) data manipulation with report design for management control. There are seven files directly related to the inventory ordering and accountability area. Each record can be accessed directly or through another file. Information on the quantity of a drug on hand, drug(s) supplied by a specific vendor, status of a purchase order, or calculation of an estimated order quantity can be retrieved quickly. In the drug master file, two records contain a reorder point and safety-stock level that are determined by searching the entries in the order history file and vendor master file. The intradepartmental and interdepartmental orders section contains five files assigned to record and store information on drug distribution. All items removed from the stockroom and distributed are recorded, and reports can be generated for itemized bills, total cost by area, and as formatted files for the accounts payable department. The design, development, and implementation of the DBMS took approximately a year using a part-time pharmacist and minimal outside help, while the previous system required constant expensive help of a programmer/analyst. The DBMS has given the pharmacy department a flexible inventory management system with increased drug control, decreased operating expenses, increased use of department personnel, and the ability to develop and enhance other systems.

Examining the construct validity of the Basic Traits Inventory and the Ten-Item Personality Inventory in the South African context

Directory of Open Access Journals (Sweden)

Samantha A. Metzer

2014-08-01

Research purpose: The main purpose of this study was to examine the discriminant and convergent validity of two personality measures that measure the big five personality factors: the longer Basic Traits Inventory (BTI and the shorter Ten-Item Personality Inventory (TIPI. Motivation for the study: Researchers have indicated a need for shorter personality measures, such as the TIPI, to assess personality dimensions. This study assessed the validity of the shorter measure in comparison with the BTI, which is considered cross-culturally valid in the South African context. Research approach, design and method: This study used a quantitative research design. Both personality measures were administered manually to a convenience sample of student participants (n = 662, and data were analysed through factor analysis utilising oblique rotation for all items. Main findings: The main findings indicate that, although the construct validity of both measures was satisfactory, the TIPI yielded unsatisfactory reliability. Practical/managerial implications: The BTI is a more reliable measure than the TIPI, which should only be used when time is limited. Contribution/value-add: In addition to providing insight into how the length of an assessment impacts on the reliability of a measure, this study further reinforces the use of the basic traits inventory as a measure that reliably measures personality in South Africa.

Shortening the Xerostomia Inventory

Science.gov (United States)

Thomson, William Murray; van der Putten, Gert-Jan; de Baat, Cees; Ikebe, Kazunori; Matsuda, Ken-ichi; Enoki, Kaori; Hopcraft, Matthew; Ling, Guo Y

2011-01-01

Objectives To determine the validity and properties of the Summated Xerostomia Inventory-Dutch Version in samples from Australia, The Netherlands, Japan and New Zealand. Study design Six cross-sectional samples of older people from The Netherlands (N = 50), Australia (N = 637 and N = 245), Japan (N = 401) and New Zealand (N = 167 and N = 86). Data were analysed using the Summated Xerostomia Inventory-Dutch Version. Results Almost all data-sets revealed a single extracted factor which explained about half of the variance, with Cronbach’s alpha values of at least 0.70. When mean scale scores were plotted against a “gold standard” xerostomia question, statistically significant gradients were observed, with the highest score seen in those who always had dry mouth, and the lowest in those who never had it. Conclusion The Summated Xerostomia Inventory-Dutch Version is valid for measuring xerostomia symptoms in clinical and epidemiological research. PMID:21684773

Research and development of LANDSAT-based crop inventory techniques

Science.gov (United States)

Horvath, R.; Cicone, R. C.; Malila, W. A. (Principal Investigator)

1982-01-01

A wide spectrum of technology pertaining to the inventory of crops using LANDSAT without in situ training data is addressed. Methods considered include Bayesian based through-the-season methods, estimation technology based on analytical profile fitting methods, and expert-based computer aided methods. Although the research was conducted using U.S. data, the adaptation of the technology to the Southern Hemisphere, especially Argentina was considered.

The effect of the greek research reactor operating schedule on its fission product inventory

International Nuclear Information System (INIS)

Annousis, J.N., Armyriotis, J.S.

1987-12-01

A simple method to convert the fission product inventory of the 'Democritos' uous Greek Research Reactor (GRR) corresponding to its continuous operation over a given time interval, into the inventory corresponting to GRR discontinuous but periodic operation of the same total duration, is presented in this paper. Relevant correction factors for 31 radioecologically significant radionuclides of the inventory are given as a function of the number of hours or operation per day, 5 days per week of the GRR, according to its present of possible future operating schedule

The effect of the Greek Research Reactor operating schedule on its fission product inventory

International Nuclear Information System (INIS)

ANOUSSIS, J.N.; ARMYRIOTIS, J.S.

1987-12-01

Full text:A simple method to convert the fission product inventory of ''Demokritos'' Greek Research Reactor(GRR) corresponding to its continuous operation over a given time interval, into the inventory corresponding to GRR discontinuous but periodic operation of the same total duration, is presented in this paper. Relevant correction factors for 31 radioecologically significant radionuclides of the inventory are given as a function of the number of hours of operation per day, 5 days per week of the GRR, according to its present or possible future operating schedule. (author)

Tritium inventories and tritium safety design principles for the fuel cycle of ITER

International Nuclear Information System (INIS)

Cristescu, I.R.; Cristescu, I.; Doerr, L.; Glugla, M.; Murdoch, D.

2007-01-01

Within the tritium plant of ITER a total inventory of about 2-3 kg will be necessary to operate the machine in the DT phase. During plasma operation, tritium will be distributed in the different sub-systems of the fuel cycle. A tool for tritium inventory evaluation within each sub-system of the fuel cycle is important with respect to both the process of licensing ITER and also for operation. It is very likely that measurements of total tritium inventories may not be possible for all sub-systems; however, tritium accounting may be achieved by modelling its hold-up within each sub-system and by validating these models in real-time against the monitored flows and tritium streams between the sub-systems. To get reliable results, an accurate dynamic modelling of the tritium content in each sub-system is necessary. A dynamic model (TRIMO) for tritium inventory calculation reflecting the design of each fuel cycle sub-systems was developed. The amount of tritium needed for ITER operation has a direct impact on the tritium inventories within the fuel cycle sub-systems. As ITER will function in pulses, the main characteristics that influence the rapid tritium recovery from the fuel cycle as necessary for refuelling are discussed. The confinement of tritium within the respective sub-systems of the fuel cycle is one of the most important safety objectives. The design of the deuterium/tritium fuel cycle of ITER includes a multiple barrier concept for the confinement of tritium. The buildings are equipped with a vent detritiation system and re-circulation type room atmosphere detritiation systems, required for tritium confinement barrier during possible tritium spillage events. Complementarily to the atmosphere detritiation systems, in ITER a water detritiation system for tritium recovery from various sources will also be operated

Consumer innovativeness and its correlates. A propositional inventory for future research

NARCIS (Netherlands)

Bartels, J.; Reinders, M.J.

2011-01-01

This article summarizes the results of a systematic review of the literature on consumer innovativeness and its correlates and provides a propositional inventory for future research. The authors identified seventy-nine relevant empirical articles from international journals through a search of

Plan and procedures for rapid inventory taking at the Research Institute for Atomic Reactors

International Nuclear Information System (INIS)

Kalygin, V.; Gorobets, A.; Karlov, S.; Suda, S.C.; Bonner, M.F.; Satkowiak, L.

1997-01-01

A major element of a system for nuclear material protection, control, and accounting (MPC and A) is to take the physical inventory of the nuclear material periodically. Physical inventory taking (PIT) includes ensuring that all nuclear material on inventory is included in the facility records and that the measured content of items or containers corresponds to the recorded values. A preliminary step to the conduct of the PIT is application of rapid inventory procedures that serve to provide the benchmark for the inventory, e.g., by identifying if any items are missing and also, if any unrecorded items are present. The Rapid Inventory approach is being implemented by the Research Institute for Atomic Reactors (RIAR) in Dimitrovgrad, Russia, as one of the first steps in the program to enhance nuclear materials safeguards at the site. This effort is being conducted under the US-Russian Cooperative Program on Nuclear Materials Protection. Control And Accounting (MPC and A), with assistance provided by specialists from US Department of Energy National Laboratories. This paper summarizes the features of the existing physical inventory system at RIAR, discusses the upgrades being introduced, and provides some observations on the technology transfer process with regard to the safeguards program

Plan and procedures for rapid inventory taking at the research institute for atomic reactors

International Nuclear Information System (INIS)

Kalygin, V.; Gorobets, A.; Karlov, S.; Suda, S.C.; Bonner, F.M.

1999-01-01

A major element of a system for nuclear material protection, control, and accounting (MPC and A) is to take the physical inventory of the nuclear material periodically. Physical inventory taking (PIT) includes ensuring that all nuclear material on inventory is included in the facility records and that the measured content of items or containers (or at least a suitable random sample thereof) corresponds to the recorded values. A preliminary step to the conduct of the PIT is application of rapid inventory procedures that serve to provide the benchmark for the inventory, e.g., by identifying if any items are missing and also, if any unrecorded items are present. The Rapid Inventory approach is being implemented by the Research Institute for Atomic Reactors (RIAR) in Dimitrovgrad, Russia, as one of the first steps in the program to enhance nuclear materials safeguards at the site. This effort is being conducted under the US-Russian Cooperative Program on Nuclear Materials Protection, Control And Accounting (MPC and A), with assistance provided by specialists from U.S. Department of Energy National Laboratories. This paper summarizes the features of the existing physical inventory system at RIAR, discusses the upgrades being introduced, and provides some observations on the technology transfer process with regard to the safeguards program. (author)

Optimization of inventory management in furniture manufacturing

OpenAIRE

Karkauskas, Justinas

2017-01-01

Aim of research - to present inventory management optimization guidelines for furniture manufacturing company, based on analysis of scientific literature and empirical research. Tasks of the Issue: • Disclose problems of inventory management in furniture manufacturing sector; • To analyze theoretical inventory management decisions; • To develop theoretical inventory management optimization model; • Do empirical research of inventory management and present offers for optimizatio...

Research notes : drainage facility asset management : more than an inventory of pipes.

Science.gov (United States)

2007-04-01

The primary objectives for the research project were twofold: 1) To develop and implement an Oregon-specific system for inventorying and evaluating the condition of pipes, culverts, and stormwater facilities based on the FHWA Culvert Management Syste...

Science Inventory | US EPA

Science.gov (United States)

The Science Inventory is a searchable database of research products primarily from EPA's Office of Research and Development. Science Inventory records provide descriptions of the product, contact information, and links to available printed material or websites.

Design, Research, and Design Research: Synergies and Contradictions

Science.gov (United States)

Nelson, Wayne A.

2013-01-01

Notions of design, research, and design research in the field of educational technology are quite different from conceptualizations held by other design fields. Examining the ways that research is conducted and used in educational technology in comparison to other design fields can provide novel insights into how research and design practice can…

Designing Wood Supply Scenarios from Forest Inventories with Stratified Predictions

Directory of Open Access Journals (Sweden)

Philipp Kilham

2018-02-01

Full Text Available Forest growth and wood supply projections are increasingly used to estimate the future availability of woody biomass and the correlated effects on forests and climate. This research parameterizes an inventory-based business-as-usual wood supply scenario, with a focus on southwest Germany and the period 2002–2012 with a stratified prediction. First, the Classification and Regression Trees algorithm groups the inventory plots into strata with corresponding harvest probabilities. Second, Random Forest algorithms generate individual harvest probabilities for the plots of each stratum. Third, the plots with the highest individual probabilities are selected as harvested until the harvest probability of the stratum is fulfilled. Fourth, the harvested volume of these plots is predicted with a linear regression model trained on harvested plots only. To illustrate the pros and cons of this method, it is compared to a direct harvested volume prediction with linear regression, and a combination of logistic regression and linear regression. Direct harvested volume regression predicts comparable volume figures, but generates these volumes in a way that differs from business-as-usual. The logistic model achieves higher overall classification accuracies, but results in underestimations or overestimations of harvest shares for several subsets of the data. The stratified prediction method balances this shortcoming, and can be of general use for forest growth and timber supply projections from large-scale forest inventories.

Examining the construct validity of the Basic Traits Inventory and the Ten-Item Personality Inventory in the South African context

Directory of Open Access Journals (Sweden)

Samantha A. Metzer

2014-08-01

Full Text Available Orientation: As there has recently been a need for researchers to consider shorter personality measures, we compared the construct validity of a longer and a shorter personality measure in the South African context. Research purpose: The main purpose of this study was to examine the discriminant and convergent validity of two personality measures that measure the big five personality factors: the longer Basic Traits Inventory (BTI and the shorter Ten-Item Personality Inventory (TIPI. Motivation for the study: Researchers have indicated a need for shorter personality measures, such as the TIPI, to assess personality dimensions. This study assessed the validity of the shorter measure in comparison with the BTI, which is considered cross-culturally valid in the South African context. Research approach, design and method: This study used a quantitative research design. Both personality measures were administered manually to a convenience sample of student participants (n = 662, and data were analysed through factor analysis utilising oblique rotation for all items. Main findings: The main findings indicate that, although the construct validity of both measures was satisfactory, the TIPI yielded unsatisfactory reliability. Practical/managerial implications: The BTI is a more reliable measure than the TIPI, which should only be used when time is limited. Contribution/value-add: In addition to providing insight into how the length of an assessment impacts on the reliability of a measure, this study further reinforces the use of the basic traits inventory as a measure that reliably measures personality in South Africa.

Research Design

DEFF Research Database (Denmark)

2019-01-01

Gunnar Scott Reinbacher (editor) Antology.  Research Design : Validation in Social Sciences. Gunnar Scott Reinbacher: Introduction. Research design and validity. 15p Ole Riis: Creative Research design. 16 p Lennart Nørreklit: Validity in Research Design. 24p Gitte Sommer Harrits: Praxeological...... Scott Reinbacher: Multidisciplinary Research Designs in Problem Based Research. The case of an european project on chronical diseases, the Tandem project (Training Alternmative Networking Skills in Diabetes Management). 15p Niels Nørgaard Kristensen: A qualitative bottom up approach to post modern...... knowledge: An integrated strategy for combining "explaining" and "understanding". 22p Heidi Houlberg Salomonsen & Viola Burau: Comparative research designs. 40p Rasmus Antoft & Heidi Houlberg Salomonsen: Studying organizations by a Pragmatic Research Design: the case of qualitative case study  designs. 31p...

Inventory of Dutch National Research on Global Climate Change: Inside and outside the National Research Programme

International Nuclear Information System (INIS)

Smythe, K.D.; Bernabo, C.; Kingma, J.; Vrakking, W.

1993-04-01

This report contains brief descriptions of research projects in the field of global climate change, performed both within and outside the Dutch National Research Programme on Global Air Pollution and Climate Change (NRP). The descriptions result from a survey of the major research institutions in The Netherlands, conducted by two consultancies (Science and Policy Associates, SPA and Holland Consulting Group, HCG) at the request of the NRP. The inventory had to be completed within a relatively brief period; it is thus unavoidable that one or more projects may sometimes contain inaccuracies. Taken as a whole, this report presents a good picture of the Dutch research activities in this area. The scope and structure of this survey and the contents of this report are based on a request for information from the World Meteorological Organization (WMO) for an intergovernmental meeting on the World Climate Programme (WCP), held on 14-16 April 1993. The WMO request emphasised activities related to the WCP and its associated programmes. The database resulting from this exercise will be a useful tool for organisations which sponsor and conduct research into global climate change in their efforts to stimulate cooperation and to promote coordination between the research groups in The Netherlands and abroad. There are plans to update the inventory in the future and to provide the information to participating organisations in The Netherlands, as well as to research organisations in other countries. An overview of the current research is provided in Volume 1, a list of projects being provided in Annex 3. The projects are presented according to the themes and subthemes which are used in the NRP

Numerical research of the optimal control problem in the semi-Markov inventory model

International Nuclear Information System (INIS)

Gorshenin, Andrey K.; Belousov, Vasily V.; Shnourkoff, Peter V.; Ivanov, Alexey V.

2015-01-01

This paper is devoted to the numerical simulation of stochastic system for inventory management products using controlled semi-Markov process. The results of a special software for the system’s research and finding the optimal control are presented

Numerical research of the optimal control problem in the semi-Markov inventory model

Energy Technology Data Exchange (ETDEWEB)

Gorshenin, Andrey K. [Institute of Informatics Problems, Russian Academy of Sciences, Vavilova str., 44/2, Moscow, Russia MIREA, Faculty of Information Technology (Russian Federation); Belousov, Vasily V. [Institute of Informatics Problems, Russian Academy of Sciences, Vavilova str., 44/2, Moscow (Russian Federation); Shnourkoff, Peter V.; Ivanov, Alexey V. [National research university Higher school of economics, Moscow (Russian Federation)

2015-03-10

This paper is devoted to the numerical simulation of stochastic system for inventory management products using controlled semi-Markov process. The results of a special software for the system’s research and finding the optimal control are presented.

A single-item inventory model for expected inventory order crossovers

NARCIS (Netherlands)

Riezebos, J.; Gaalman, G.J.C.

2009-01-01

Expected inventory order crossovers Occur if at the moment of ordering it is expected that orders will not arrive in the sequence they are ordered. Recent research has shown that (it) expected inventory order crossovers will be encountered more frequently in future, and that (b) use of a myopic

Inventory of Federal energy-related environment and safety research for FY 1979. Volume 1. Executive summary

International Nuclear Information System (INIS)

1980-12-01

The FY 1979 Federal Inventory contains information on 3506 federally funded energy-related environmental and safety research projects. The Inventory is published in two volumes: Volume I, an executive summary and overview of the data and Volume II, project listings, summaries, and indexes. Research and development (R and D) categories were reorganized into three main areas; environmental and safety control technology, technology impacts overview and assessments, and biological and environmental R and D and assessments. Federal offices submitting project data were: Council on Environmental Quality; Department of Agriculture; Department of Commerce; Department of Defense; Department of Energy; Department of Health, Education, and Welfare; Department of Housing and Urban Development; Department of the Interior; Department of Transportation; Environmental Protection Agency; National Aeronautics and Space Administration; Nuclear Regulatory Commission; National Science Foundation; Office of Technology Assessment; and Tennessee Valley Authority. The inventory also breaks out research sponsored by various federal agencies and the amount of funding provided by each in various research categories. The format and index system allows efficient access to information compiled. Users are able to identify projects by log agency, performing organization, principal investigator and subject

On Inventory Control For Perishable Inventory Systems Subject To Uncertainties On Customer Demands

OpenAIRE

Abbou , Rosa; Loiseau , Jean-Jacques; Khaldi , Hajer; Farraa , Berna ,

2017-01-01

International audience; This paper deals with the inventory controller design for constrained production systems subject to uncertainties on the customer demands. The case study focuses on the inventory regulation problem in production systems where contain perishable finite products. Such systems are characterized by the presence of delays due to production processes, and constraints from the instantaneous inventory level, production level and the finite capacities of stocks. To do that, we ...

Patient issues in health research and quality of care: an inventory and data synthesis

NARCIS (Netherlands)

Teunissen, G.J.; Visse, M.A.; Boer, P.; Abma, T.A.

2013-01-01

Aim The purpose of this review is to generate an inventory of issues that matter from a patient perspective in health research and quality of care. From these issues, criteria will be elicited to support patient(s) (groups) in their role as advisor or advocate when appraising health research, health

A Control Systems Concept Inventory Test Design and Assessment

Science.gov (United States)

Bristow, M.; Erkorkmaz, K.; Huissoon, J. P.; Jeon, Soo; Owen, W. S.; Waslander, S. L.; Stubley, G. D.

2012-01-01

Any meaningful initiative to improve the teaching and learning in introductory control systems courses needs a clear test of student conceptual understanding to determine the effectiveness of proposed methods and activities. The authors propose a control systems concept inventory. Development of the inventory was collaborative and iterative. The…

Foreign research reactor irradiated nuclear fuel inventories containing HEU and LEU of United States origin

International Nuclear Information System (INIS)

Matos, J.E.

1994-12-01

This report provides estimates of foreign research reactor inventories of aluminum-based and TRIGA irradiated nuclear fuel elements containing highly enriched and low enriched uranium of United States origin that are anticipated in January 1996, January 2001, and January 2006. These fuels from 104 research reactors in 41 countries are the same aluminum-based and TRIGA fuels that were eligible for receipt under the Department of Energy's Offsite Fuels Policy that was in effect in 1988. All fuel inventory and reactor data that were available as of December 1, 1994, have been included in the estimates of approximately 14,300 irradiated fuel elements in January 1996, 18,800 in January 2001, and 22,700 in January 2006

Design Research

DEFF Research Database (Denmark)

Design Research is a new interdisciplinary research area with a social science orientation at its heart, and this book explores how scientific knowledge can be put into practice in ways that are at once ethical, creative, helpful, and extraordinary in their results. In order to clarify the common...... aspects – in terms of features and approaches – that characterize all strands of research disciplines addressing design, Design Research undertakes an in depth exploration of the social processes involved in doing design, as well as analyses of the contexts for design use. The book further elicits...... ‘synergies from interdisciplinary perspectives’ by discussing and elaborating on differing academic perspectives, theoretical backgrounds, and design concept definitions, and evaluating their unique contribution to a general core of design research. This book is an exciting contribution to this little...

Inventory control strategies

International Nuclear Information System (INIS)

Primrose, D.

1998-01-01

Finning International Inc. is in the business of selling, financing and servicing Caterpillar and complementary equipment. Its main markets are in western Canada, Britain and Chile. This paper discusses the parts inventory strategies system for Finning (Canada). The company's territory covers British Columbia, Alberta, the Yukon and the Northwest Territories. Finning's parts inventory consists of 80,000 component units valued at more than $150 M. Distribution centres are located in Langley, British Columbia and Edmonton, Alberta. To make inventory and orders easier to control, Finning has designed a computer-based system, with software written exclusively for Caterpillar dealers. The system makes use of a real time electronic interface with all Finning locations, plus all Caterpillar facilities and other dealers in North America. Details of the system are discussed, including territorial stocking procedures, addition to stock, exhaustion of stock, automatic/suggest order controls, surplus inventory management, and procedures for jointly managed inventory. 3 tabs., 1 fig

Earthquake resistant design of nuclear facilities with limited radioactive inventory

International Nuclear Information System (INIS)

1985-10-01

This document comprises the essential elements of an earthquake resistant design code for nuclear facilities with limited radioactive inventory. The purpose of the document is the enhancement of seismic safety for such facilities without the necessity to resort to complicated and sophisticated methodologies which are often associated with and borrowed from nuclear power plant analysis and design. The first two sections are concerned with the type of facility for which the document is applicable and the radiological consideration for accident conditions. The principles of facility classification and item categorization as a function of the potential radiological consequences of failure are given in section 3. The design basis ground motion is evaluated in sections 4-6 using a simplified but conservative approach which also includes considerations for the underlying soil characteristics. Sections 7 and 8 specify the principles of seismic design of building structures and equipment using two methods, called the equivalent static and simplified dynamic approach. Considerations for the detailing of equipment and piping and those other than for lateral load calculations, such as sloshing effects, are given in the subsequent sections. Several appendices are given for illustration of the principles presented in the text. Finally, a design tree diagram is included to facilitate the user's task of making the appropriate selections. (author)

Clean Lead Facility Inventory System user's manual

International Nuclear Information System (INIS)

Garcia, J.F.

1994-12-01

The purpose of this user's manual is to provide instruction and guidance needed to enter and maintain inventory information for the Clean Lead Facility (CLF), PER-612. Individuals responsible for maintaining and using the system should study and understand the information provided. The user's manual describes how to properly use and maintain the CLF Inventory System. Annual, quarterly, monthly, and current inventory reports may be printed from the Inventory System for reporting purposes. Profile reports of each shipment of lead may also be printed for verification and documentation of lead transactions. The CLF Inventory System was designed on Microsoft Access version 2.0. Similar inventory systems are in use at the Idaho National Engineering Laboratory (INEL) to facilitate site-wide compilations of mixed waste data. The CLF Inventory System was designed for inventorying the clean or non-radioactive contaminated lead stored at the CLF. This data, along with the mixed waste data, will be compiled into the Idaho Mixed Waste Information (IMWI) system for reporting to the Department of Energy Idaho Office, Department of Energy Headquarters, and/or the State of Idaho

First IAEA research co-ordination meeting on 'Tritium inventory in fusion reactors'. Summary report

International Nuclear Information System (INIS)

Clark, R.E.H.

2003-02-01

The proceedings and conclusions of the first Research Co-ordination Meeting on 'Tritium Inventory in Fusion Reactors', held on November 4-6, 2002 at the IAEA Headquarters in Vienna are briefly described. This report includes a summary of the presentations made by the meeting participants and the specific goals set by the participants of the Co-ordinated Research Project (CRP). (author)

Inventory Management Strategies For Productivity Improvement In Equipment Manufacturing Firms

Directory of Open Access Journals (Sweden)

T.T Amachree

2017-08-01

Full Text Available This study examined and developed Inventory Management Strategies IMS which could be creatively employed for Productivity Improvement in Equipment Firms PIEMF Equipment manufacturing projects suffer from declining productivity and inability to effectively satisfy customized order batch quantity within schedules budgeted cost and quality specifications due to lack of robust and well defined IMS as well as none code classification of vast number of inventory item. Survey and expost-facto research designs were adopted on the four identified IMS in three EMF. The method used for primary data collection and measurement on four IMS and inventory management parameters was questionnaire modelled into likert five point scale from the target respondents being experts in the subject matter. The secondary data was obtained from the computerised inventory status file of the three equipment manufacturing firms. The methods of primary data analysis and test of research used were Pearsons product moment correlation coefficient and oneway. Analysis of variance ANOVA computer software via Statistical Program for Social Science SPSS version 17 ABC analysis and classification of materials was used for code categorization of secondary data also with the aid of Microsoft excel. The results of the analyses highlighted and isolated A class of inventory items which are 137 out of 543 for Siemens Nig. Ltd 154 out of 551 for Dresser-Rand Nig. Ltd and 162 of 551 for Nigerian Engineering Works Ltd. The results of Pearson product moment correlation analysis and test of research hypotheses indicate that Materials Requirements Planning MRP followed by Supply Chain Management SCM are the most significant IMS as they correlate strongly with PIEMF. The study recommends IMS adoption by code classification of materials in which MRP or SCM could be deployed for management of A class of inventories while classical IMS could be used for management B and C classes of inventory items.

Validation of a patient-centered culturally sensitive health care office staff inventory.

Science.gov (United States)

Tucker, Carolyn M; Wall, Whitney; Marsiske, Michael; Nghiem, Khanh; Roncoroni, Julia

2015-09-01

Research suggests that patient-perceived culturally sensitive health care encompasses multiple components of the health care delivery system including the cultural sensitivity of front desk office staff. Despite this, research on culturally sensitive health care focuses almost exclusively on provider behaviors, attitudes, and knowledge. This is due in part to the paucity of instruments available to assess the cultural sensitivity of front desk office staff. Thus, the objective of the present study is to determine the psychometric properties of the pilot Tucker-Culturally Sensitive Health Care Office Staff Inventory-Patient Form (T-CSHCOSI-PF), which is an instrument designed to enable patients to evaluate the patient-defined cultural sensitivity of their front desk office staff. A sample of 1648 adult patients was recruited by staff at 67 health care sites across the United States. These patients anonymously completed the T-CSHCOSI-PF, a demographic data questionnaire, and a patient satisfaction questionnaire. Findings Confirmatory factor analyses of the TCSHCOSI-PF revealed that this inventory has two factors with high internal consistency reliability and validity (Cronbach's αs=0.97 and 0.95). It is concluded that the T-CSHCOSI-PF is a psychometrically strong and useful inventory for assessing the cultural sensitivity of front desk office staff. This inventory can be used to support culturally sensitive health care research, evaluate the job performance of front desk office staff, and aid in the development of trainings designed to improve the cultural sensitivity of these office staff.

Initial Radionuclide Inventories

Energy Technology Data Exchange (ETDEWEB)

H. Miller

2004-09-19

The purpose of this analysis is to provide an initial radionuclide inventory (in grams per waste package) and associated uncertainty distributions for use in the Total System Performance Assessment for the License Application (TSPA-LA) in support of the license application for the repository at Yucca Mountain, Nevada. This document is intended for use in postclosure analysis only. Bounding waste stream information and data were collected that capture probable limits. For commercially generated waste, this analysis considers alternative waste stream projections to bound the characteristics of wastes likely to be encountered using arrival scenarios that potentially impact the commercial spent nuclear fuel (CSNF) waste stream. For TSPA-LA, this radionuclide inventory analysis considers U.S. Department of Energy (DOE) high-level radioactive waste (DHLW) glass and two types of spent nuclear fuel (SNF): CSNF and DOE-owned (DSNF). These wastes are placed in two groups of waste packages: the CSNF waste package and the codisposal waste package (CDSP), which are designated to contain DHLW glass and DSNF, or DHLW glass only. The radionuclide inventory for naval SNF is provided separately in the classified ''Naval Nuclear Propulsion Program Technical Support Document'' for the License Application. As noted previously, the radionuclide inventory data presented here is intended only for TSPA-LA postclosure calculations. It is not applicable to preclosure safety calculations. Safe storage, transportation, and ultimate disposal of these wastes require safety analyses to support the design and licensing of repository equipment and facilities. These analyses will require radionuclide inventories to represent the radioactive source term that must be accommodated during handling, storage and disposition of these wastes. This analysis uses the best available information to identify the radionuclide inventory that is expected at the last year of last emplacement

The KINDRA H2020 Project: a knowledge inventory for hydrogeology research

Science.gov (United States)

Petitta, Marco; Bodo, Balazs; Caschetto, Mariachiara; Correia, Victor; Cseko, Adrienn; Fernandez, Isabel; Hartai, Eva; Hinsby, Klaus; Madarasz, Tamas; Garcia Padilla, Mercedes; Szucs, Peter

2015-04-01

into wider programs generally related to water, environment or ecology. In order to have a comprehensive understanding on the groundwater theme, it is necessary to create a "snapshot" of our scientific knowledge as of 2015/2016 covering as many European countries as possible. Such comprehensive coverage will result in an accurate assessment of the state of the art in hydrogeology research in various geographical and geo-environmental settings, allowing for direct comparison and the exploitation of synergies. The KINDRA project (Knowledge Inventory for hydrogeology research, Grant Agreement No. 642047, www.kindraproject.eu) seeks to create a critical mass for scientific knowledge exchange of hydrogeology research, to ensure wide applicability of research results, including support of innovation and development, and to reduce unnecessary duplication of efforts. KINDRA is funded by the European Commission's HORIZON2020 Framework Programme. The project started on 1 January 2015 with the overall objective to take stock of our contemporary knowledge of hydrogeology with the help of an inventory of research results, activities, projects and programmes, and then use the inventory to identify critical research challenges and gaps, with a view to avoiding overlaps. This approach takes into account the implementation of the WFD and new innovation areas within integrated water resources management, allowing at EU scale the future correct management and policy development of groundwater.

Inventory of water objects for purposes of development objectives and design of natural frame of Kazan (Russia)

Science.gov (United States)

Mingazova, N. M.

2018-01-01

The article is devoted to the results of the inventory and certification of water objects in the city of Kazan in 2007-2017. Inventory of water objects contributes to the formation of the natural framework of the city, improvement of the quality of the environment, preservation of the local gene pool of flora and fauna in urban conditions. During the research, 236 small lakes, rivers and their tributaries, as well as wetlands, were identified. The environmental passports were developed for each of them. Registries of water bodies were developed for administrative regions. The inventory and certification of water objects are an effective measure in the conservation of lakes and rivers in urban conditions.

A Location-Inventory-Routing Problem in Forward and Reverse Logistics Network Design

Directory of Open Access Journals (Sweden)

Qunli Yuchi

2016-01-01

Full Text Available We study a new problem of location-inventory-routing in forward and reverse logistic (LIRP-FRL network design, which simultaneously integrates the location decisions of distribution centers (DCs, the inventory policies of opened DCs, and the vehicle routing decision in serving customers, in which new goods are produced and damaged goods are repaired by a manufacturer and then returned to the market to satisfy customers’ demands as new ones. Our objective is to minimize the total costs of manufacturing and remanufacturing goods, building DCs, shipping goods (new or recovered between the manufacturer and opened DCs, and distributing new or recovered goods to customers and ordering and storage costs of goods. A nonlinear integer programming model is proposed to formulate the LIRP-FRL. A new tabu search (NTS algorithm is developed to achieve near optimal solution of the problem. Numerical experiments on the benchmark instances of a simplified version of the LIRP-FRL, the capacitated location routing problem, and the randomly generated LIRP-FRL instances demonstrate the effectiveness and efficiency of the proposed NTS algorithm in problem resolution.

Projecting Timber Inventory at the Product Level

Science.gov (United States)

Lawrence Teeter; Xiaoping Zhou

1999-01-01

Current timber inventory projections generally lack information on inventory by product classes. Most models available for inventory projection and linked to supply analyses are limited to projecting aggregate softwood and hardwood. The research presented describes a methodology for distributing the volume on each FIA (USDA Forest Service Forest Inventory and Analysis...

Research-based design & design-based research: Affordances, limitations and synergies

NARCIS (Netherlands)

McKenney, Susan

2015-01-01

Research-based design is an orientation to educational development that is explicitly informed by existing research as well as formative evaluation. Design-based research is a genre of inquiry in which the design of innovative solutions to problems in educational practice provides the context for

Design Research as Conceptual Designing

DEFF Research Database (Denmark)

Ylirisku, Salu; Jacucci, Giulio; Sellen, Abigail

2015-01-01

define conceptual designing as a constructive framing and re-framing activity, which is mediated by and targeted at the creation of new design concepts. Conceptual designing as an approach is valuable for addressing the fuzziness and ambiguity typical of research that explores novel areas with new...... partners, methods and resources. It is by no means a new phenomenon, and the main contribution of the article is the clarification of conceptual designing as a particular approach to designing and researching. The approach embraces openness, resource-construction and collaboration. We conclude...... that conceptual designing can be especially useful in research and design projects that bring different kinds of people, organizations, technologies and domains together into the forming of new well-founded proposals for development. The presentation of conceptual designing in this paper is written...

Strategic Inventories in Vertical Contracts

OpenAIRE

Krishnan Anand; Ravi Anupindi; Yehuda Bassok

2008-01-01

Classical reasons for carrying inventory include fixed (nonlinear) production or procurement costs, lead times, nonstationary or uncertain supply/demand, and capacity constraints. The last decade has seen active research in supply chain coordination focusing on the role of incentive contracts to achieve first-best levels of inventory. An extensive literature in industrial organization that studies incentives for vertical controls largely ignores the effect of inventories. Does the ability to ...

Development of emissions inventories for the Auto/Oil Air Quality Improvement Research Program

International Nuclear Information System (INIS)

Pollack, A.K.; Fieber, J.L.; Lauer, G.; Dunker, A.M.; Noda, A.M.; Schleyer, C.H.; Chock, D.P.; Hertz, M.; Metcalfe, J.E.

1992-01-01

The air quality effects of different reformulated gasolines, various other alternative fuels, and developments in automotive technologies are being studied as part of a joint research project conducted by a consortium of three domestic auto companies and fourteen petroleum companies. As part of the air quality modeling effort, emission inventories are being developed in a near-term year (1995), and 21 fuels in a long-term year (2005 or 2010). A distinctive feature of this effort is that these inventories are the first used in an air quality study that treat light duty vehicle emissions by operating mode as well as by class, and base the speciation characteristics of each operating mode on actual vehicle test results. This incorporates an unusual amount of detail on the relative importance of each of the three vehicle exhaust, two evaporative, and running loss operating modes, both in terms of overall mass emission amounts and in terms of the hydrocarbon speciation and ozone reactivity. This study also allows a better estimate of the relative importance of each vehicle class and technology type to an overall emission inventory, and of the differences in the effects of alternative fuels between vehicle technologies and classes. In addition, the role of mobile source emissions relative to other sources of emissions for both short-term and long-term emission projections, and across a wide geographic range is being assessed. This paper first describes the techniques used in developing these emission inventories, and then examines regional, temporal, and fuel/vehicle effects on emissions

Data Driven Tuning of Inventory Controllers

DEFF Research Database (Denmark)

Huusom, Jakob Kjøbsted; Santacoloma, Paloma Andrade; Poulsen, Niels Kjølstad

2007-01-01

A systematic method for criterion based tuning of inventory controllers based on data-driven iterative feedback tuning is presented. This tuning method circumvent problems with modeling bias. The process model used for the design of the inventory control is utilized in the tuning...... as an approximation to reduce time required on experiments. The method is illustrated in an application with a multivariable inventory control implementation on a four tank system....

Reflection: Research by Design: Design-Based Research and the Higher Degree Research Student

Science.gov (United States)

Kennedy-Clark, Shannon

2015-01-01

The article "Research by design: Design-based research and the higher degree research student" (Kennedy-Clark, 2013) appeared in the "Journal of Learning Design" Volume 6, Issue 2 in 2013. Two years on, Shannon Kennedy-Clark reflects upon her original article. Upon being asked to revisit this article the author reflected upon…

Anomalous dismeter distribution shifts estimated from FIA inventories through time

Science.gov (United States)

Francis A. Roesch; Paul C. Van Deusen

2010-01-01

In the past decade, the United States Department of Agriculture Forest Service’s Forest Inventory and Analysis Program (FIA) has replaced regionally autonomous, periodic, state-wide forest inventories using various probability proportional to tree size sampling designs with a nationally consistent annual forest inventory design utilizing systematically spaced clusters...

Translation and Psychometric of Personality Disorders Inventory According to DMS-V

Directory of Open Access Journals (Sweden)

Vahideh Nayeri

2017-03-01

Full Text Available Background and Objectives: Personality disorders are prevalent among psychiatric patients. These disorders can exist along with other psychiatric disorders or predispose the patients to them. Patients with personality disorder are usually not aware of their disease, and their treatment is difficult and complicated. The present research was performed with the purpose of determining affected patients usually do not have insight about their condition and it make the treatment a complex and hard process. The aim of current study was to determine construct and criterion validity of personality disorders diagnostic tool according to DSM-V. Methods: This study was a cross-sectional study with correlational design. In this study, Personality Disorder Inventory was translated based on DSM-V, and its psychometric was determined in Persian. The questionnaire’s validity was determined by concurrent validity method using NEO personality inventory. A total of 74 patients and 29 students with personality disorders, whose disorder was recognized by clinical interview, completed two questionnaire. The correlation between domains of the two questionnaires was determined by Pearson correlation test. Results: There were significant correlations between the domains of Personality Disorder Inventory and those of NEO Personality Inventory (p<0.001(. Conclusion: The results of the present research showed that the Persian version of PID-5 has appropriate criterion, construct, and convergence validity compared to NEO personality inventory.

two-level inventory optimization under probability event chain

African Journals Online (AJOL)

Journal of Modeling, Design and Management of Engineering Systems ... The paper introduces the concept of effective inventory level, which is used to evaluate the impact of upstream shortage on downstream inventory, models the inventory at warehouse and retailer under random lead time and demand, and makes the ...

Shrink stope design using an inventory model

Directory of Open Access Journals (Sweden)

D. Taylor

2003-12-01

Full Text Available This paper addresses the fact that current practice in shrink-stoping in hard rock mining invariably ignores the inventory holding cost of the blasted ore. We believe, and show by example, that ignoring this cost could make the difference between profit and loss in an industry that, at present, needs all the help it can get.

CINERGI: Community Inventory of EarthCube Resources for Geoscience Interoperability

Science.gov (United States)

Zaslavsky, Ilya; Bermudez, Luis; Grethe, Jeffrey; Gupta, Amarnath; Hsu, Leslie; Lehnert, Kerstin; Malik, Tanu; Richard, Stephen; Valentine, David; Whitenack, Thomas

2014-05-01

Organizing geoscience data resources to support cross-disciplinary data discovery, interpretation, analysis and integration is challenging because of different information models, semantic frameworks, metadata profiles, catalogs, and services used in different geoscience domains, not to mention different research paradigms and methodologies. The central goal of CINERGI, a new project supported by the US National Science Foundation through its EarthCube Building Blocks program, is to create a methodology and assemble a large inventory of high-quality information resources capable of supporting data discovery needs of researchers in a wide range of geoscience domains. The key characteristics of the inventory are: 1) collaboration with and integration of metadata resources from a number of large data facilities; 2) reliance on international metadata and catalog service standards; 3) assessment of resource "interoperability-readiness"; 4) ability to cross-link and navigate data resources, projects, models, researcher directories, publications, usage information, etc.; 5) efficient inclusion of "long-tail" data, which are not appearing in existing domain repositories; 6) data registration at feature level where appropriate, in addition to common dataset-level registration, and 7) integration with parallel EarthCube efforts, in particular focused on EarthCube governance, information brokering, service-oriented architecture design and management of semantic information. We discuss challenges associated with accomplishing CINERGI goals, including defining the inventory scope; managing different granularity levels of resource registration; interaction with search systems of domain repositories; explicating domain semantics; metadata brokering, harvesting and pruning; managing provenance of the harvested metadata; and cross-linking resources based on the linked open data (LOD) approaches. At the higher level of the inventory, we register domain-wide resources such as domain

Determination of the radioactive inventory of a fuel assembly from a U3O8 design core using ORIGEN 2.1 code

International Nuclear Information System (INIS)

Castro, Jose; Ticona, Braulio; Madariaga, Marcelo

2014-01-01

This paper shows a methodology to determine the radioactive inventory of a fuel assembly of the RP-10 design core, which was proposed in 1988, using the ORIGEN 2.1 code, which allows to determine the activity of the 52 most characteristic fission products, its growth in activity during reactor operation under the terms of the design and evolution of decay of the fission products after 4 hours after the reactor shutdown, which conservatively, a fuel element represents an average fraction of the considered power in the radioactive inventory assessment. (authors).

THE DEVELOPMENT OF A WEB BASED DATABASE APPLICATIONS OF PROCUREMENT, INVENTORY, AND SALES AT PT. INTERJAYA SURYA MEGAH

Directory of Open Access Journals (Sweden)

Choirul Huda

2011-10-01

Full Text Available The objective of this research is to develop a web based database application for the procurement, inventory and sales at PT. Interjaya Surya Megah. The current system at PT. Interjaya Surya Megah is running manually, so the company has difficulty in carrying out its activities. The methodology, that is used in this research, includes interviews, observation, literature review, conceptual database design, logical database design and physical database design. The results are the establishment of a web-based database application at PT. Interjaya Surya Megah. The conclusion is the company can be easier to run the day-to-day activities because data processing becomes faster and more accurate, faster report generation and more accurate, more secure data storage.Keywords: database; application; procurement; inventory; sales

National studies on recidivism: an inventory of large-scale recidivism research in 33 European countries

NARCIS (Netherlands)

Wartna, B.S.J.; Nijssen, L.T.J.

2006-01-01

Measuring recidivism is an established method for examining the effects of penal interventions. Over the last decades the automation of police and judiciary data has opened up opportunities to do large-scale recidivism research. The WODC has made an inventory of the studies that are carried out in

A Cross-Validation Study of the Kirton Adaption-Innovation Inventory in Three Research and Development Organizations.

Science.gov (United States)

Keller, Robert T.; Holland, Winford E.

1979-01-01

A cross-validation study of the Kirton Adaption-Innovation Inventory (KAI) was conducted with 256 professional employees from three applied research and development organizations. The KAI correlated well with both direct and indirect measures of innovativeness in all three organizations. (Author/MH)

Against (Design Research

Directory of Open Access Journals (Sweden)

Ferdinand Indrajaya

2011-10-01

Full Text Available The content of this article is an attempt to show that the word research in traditional sense (within the Cartesian scheme is hostile to design activity. It will reduce the process of design into a merely fix mechanical process, burying the aspect of imagination, creativity, and more importantly proposing in it that is a crucial aspect to design. This imposition might indiscipline (in a formal academic sense design as a discipline in human sciences. In order to achieve this, the article is divided in three sections. The first section will discuss what scientific research is and what traditionally presupposed in it: objective, neutral, and a-historical; simply the disinterestedness of research. As for the second, epistemological concerns on traditional scientific research from two philosophers of science will be discussed: Thomas S. Kuhn and Paul K. Feyerabend. As for the third, the closing section, an attempt to delineate design and what designers do in comparison to scientists’ will be discussed. It is how design and designers are different in their manners with traditional science and scientist. 

Developing Learning Style Inventory for Effective Instructional Design

Science.gov (United States)

Guven, Bulent; Ozbek, Ozge

2007-01-01

In the process of education, instead of classifying students according to their insufficiency, teachers should try to get to know them and determine their cognitive, sensorial, and kinetic characteristics. This study on improving learning style inventory, which aims to help classroom teachers determine students' attributes in individualized…

Research by Design - a Research and Teaching Concept

DEFF Research Database (Denmark)

Hauberg, Jørgen; Tamke, Martin; Ramsgaard Thomsen, Mette

2012-01-01

Abstract. Interweaving research and design-based architectural education is an important effort in most architect schools. All good design is informed by some kind of research – research-based design. And all architect schools involve research in their teaching – research based education. Research...... by design. The paper asks how “the new” in architectural production emerges and aims to find similarities between the tradition of practice based proposals and theorisation, and our own research and teaching practice. Grounded in this practice the paper investigates how research by design contributes...... to the construction of knowledge and student’s learning outcomes through research led workshops. The paper presents research inquiries, results and methodologies of two parallel research workshops and discusses the format by which this research tool is developed. Keywords: Research by Design, practice-based research...

US Department of Energy`s weapons complex scrap metal inventory. Research report

Energy Technology Data Exchange (ETDEWEB)

Duda, J.R.

1993-07-01

Two tasks comprise the thrust of this contracted effort. Task 1 is the development of a Source List and is based on determining a list of public documents pertaining to contaminated/uncontaminated scrap metals, equipment, and other materials of value, were they not contaminated or could they be decontaminated. Task 2 is to develop an inventory of such materials from the Task 1 list of public documentation. In more detail, the Task 2 Inventory Report is based upon fulfillment of the following requirement to prepare and submit an Inventory Report based on the information obtained in the Source List. The Inventory Report shall define the type, quantity, and location of used equipment, scrap metal, and other materials existing within DOE`s system. The Inventory Report shall list: the site where the equipment, scrap metal, or other material resides; the type and size of equipment; the type and volume and/or weight of scrap metal or other material; its source; the type and level of contamination; its accessibility; the current annual rate of generation; and the projected annual rate of generation of the material.

Inventory Centralization Decision Framework for Spare Parts

DEFF Research Database (Denmark)

Gregersen, Nicklas; Herbert-Hansen, Zaza Nadja Lee

2018-01-01

Within the current literature, there is a lack of a holistic and multidisciplinary approach to managing spare parts and their inventory configuration. This paper addresses this research gap by examining the key contextual factors which influence the degree of inventory centralization and proposes...... a novel holistic theoretical framework, the Inventory Centralization Decision Framework (ICDF), useful for practitioners. Through an extensive review of inventory management literature, six contextual factors influencing the degree of inventory centralization have been identified. Using the ICDF...... practitioners can assess the most advantageous inventory configuration of spare parts. The framework is tested on a large global company which, as a result, today actively uses the ICDF; thus showing its practical applicability....

Towards programmatic design research

Directory of Open Access Journals (Sweden)

Jonas Löwgren

2013-12-01

Full Text Available The notion of design research entails research where design practice forms part of the knowledge production. Based on our characterization of the nature of design, we propose to conceptualize this kind of research as programmatic design research. Two ongoing PhD projects in interaction design are presented as examples of programmatic research processes, highlighting issues to do with the virtues and qualities of the processes, the interplay of optics and engagements in a hermeneutical dynamic, and the production of takeaways for the academic community.

Research by Design: Design-Based Research and the Higher Degree Research student

Science.gov (United States)

Kennedy-Clark, Shannon

2013-01-01

Design-based research lends itself to educational research as the aim of this approach is to develop and refine the design of artefacts, tools and curriculum and to advance existing theory or develop new theories that can support and lead to a deepened understanding of learning. This paper provides an overview of the potential benefits of using a…

Research Designs and Special Education Research: Different Designs Address Different Questions

Science.gov (United States)

Cook, Bryan G.; Cook, Lysandra

2016-01-01

The aim of this article is to provide practitioners and other nonresearchers a basic understanding of research designs to aid in appropriately interpreting and applying research findings in special education. Research design provides the blueprint for conducting a research study and shapes what kind of knowledge is generated by the study. We…

Development of a SaaS Inventory Management System

OpenAIRE

Loizides, Antonis

2013-01-01

The objective of this research is to develop a Software as a Service web application and more specifically an Inventory Management System for Caterpro Ltd. The aim of this web application is to provide the basic tool for tracking as well as monitoring sales and inventory to individuals and small businesses who cannot afford the investment of a complete dedicated Inventory Management System. Moreover, this research will used for various purposes all the necessary components as well as steps re...

Inventories in the Australian business cycle

OpenAIRE

Chindamo, Phillip

2010-01-01

This Economics Research Note examines inventories in the business cycle for Australia covering the period since the mid 1980s. The Australian Bureau of Statistics (ABS) defines inventories as all materials etc., work in progress and finished goods owned by a business, whether held at locations of the business or elsewhere. These items are usually held by businesses in anticipation of a product’s sale. Inventory investment is counted as an additional contribution to gross domestic product (...

Design (research) practice

DEFF Research Database (Denmark)

Binder, Thomas; Brandt, Eva

2017-01-01

possibilities through experimentation (Brandt and Binder 2007). Likewise in relation to design research we have argued that “the possible is always contingent and though research may convincingly provide arguments for certain possibilities both search and arguments have to be guided by programs that set...... substantiate or challenge this view and the dialectic between program and probing is in our view central to any design practice” (Binder and Redström 2006: 4). Our suggestion is to see design research practices as fundamentally homologous to any other design practices both in terms of the way they are driven...

Design Process-System and Methodology of Design Research

Science.gov (United States)

Bashier, Fathi

2017-10-01

Studies have recognized the failure of the traditional design approach both in practice and in the studio. They showed that design problems today are too complex for the traditional approach to cope with and reflected a new interest in a better quality design services in order to meet the challenges of our time. In the mid-1970s and early 1980s, there has been a significant shift in focus within the field of design research towards the aim of creating a ‘design discipline’. The problem, as will be discussed, is the lack of an integrated theory of design knowledge that can explicitly describe the design process in a coherent way. As a consequence, the traditional approach fails to operate systematically, in a disciplinary manner. Addressing this problem is the primary goal of the research study in the design process currently being conducted in the research-based master studio at Wollega University, Ethiopia. The research study seeks to make a contribution towards a disciplinary approach, through proper understanding the mechanism of knowledge development within design process systems. This is the task of the ‘theory of design knowledge’. In this article the research project is introduced, and a model of the design process-system is developed in the studio as a research plan and a tool of design research at the same time. Based on data drawn from students’ research projects, the theory of design knowledge is developed and empirically verified through the research project.

Preparing US community greenhouse gas inventories for climate action plans

International Nuclear Information System (INIS)

Blackhurst, Michael; Scott Matthews, H; Hendrickson, Chris T; Sharrard, Aurora L; Azevedo, Ines Lima

2011-01-01

This study illustrates how alternative and supplemental community-level greenhouse gas (GHG) inventory techniques could improve climate action planning. Eighteen US community GHG inventories are reviewed for current practice. Inventory techniques could be improved by disaggregating the sectors reported, reporting inventory uncertainty and variability, and aligning inventories with local organizations that could facilitate emissions reductions. The potential advantages and challenges of supplementing inventories with comparative benchmarks are also discussed. While GHG inventorying and climate action planning are nascent fields, these techniques can improve CAP design, help communities set more meaningful emission reduction targets, and facilitate CAP implementation and progress monitoring.

Preparing US community greenhouse gas inventories for climate action plans

Energy Technology Data Exchange (ETDEWEB)

Blackhurst, Michael [Department of Civil, Architectural and Environmental Engineering, The University of Texas at Austin, 1 University Station C1752, Austin, TX 78712-0276 (United States); Scott Matthews, H; Hendrickson, Chris T [Department of Civil and Environmental Engineering, Carnegie Mellon University, 119 Porter Hall, Pittsburgh, PA 15213 (United States); Sharrard, Aurora L [Green Building Alliance, 333 East Carson Street, Suite 331, Pittsburgh, PA 15219 (United States); Azevedo, Ines Lima, E-mail: mblackhurst@gmail.com, E-mail: hsm@cmu.edu, E-mail: auroras@gbapgh.org, E-mail: cth@andrew.cmu.edu, E-mail: iazevedo@cmu.edu [Department of Engineering and Public Policy, Carnegie Mellon University, 119 Porter Hall, Pittsburgh, PA 15213 (United States)

2011-07-15

This study illustrates how alternative and supplemental community-level greenhouse gas (GHG) inventory techniques could improve climate action planning. Eighteen US community GHG inventories are reviewed for current practice. Inventory techniques could be improved by disaggregating the sectors reported, reporting inventory uncertainty and variability, and aligning inventories with local organizations that could facilitate emissions reductions. The potential advantages and challenges of supplementing inventories with comparative benchmarks are also discussed. While GHG inventorying and climate action planning are nascent fields, these techniques can improve CAP design, help communities set more meaningful emission reduction targets, and facilitate CAP implementation and progress monitoring.

Experimental Design Research

DEFF Research Database (Denmark)

This book presents a new, multidisciplinary perspective on and paradigm for integrative experimental design research. It addresses various perspectives on methods, analysis and overall research approach, and how they can be synthesized to advance understanding of design. It explores the foundations...... of experimental approaches and their utility in this domain, and brings together analytical approaches to promote an integrated understanding. The book also investigates where these approaches lead to and how they link design research more fully with other disciplines (e.g. psychology, cognition, sociology......, computer science, management). Above all, the book emphasizes the integrative nature of design research in terms of the methods, theories, and units of study—from the individual to the organizational level. Although this approach offers many advantages, it has inherently led to a situation in current...

Study of Intelligent Secure Chemical Inventory Management System

Science.gov (United States)

Shukran, Mohd Afizi Mohd; Naim Abdullah, Muhammad; Nazri Ismail, Mohd; Maskat, Kamaruzaman; Isa, Mohd Rizal Mohd; Shahfee Ishak, Muhammad; Adib Khairuddin, Muhamad

2017-08-01

Chemical inventory management system has been experiencing a new revolution from traditional inventory system which is manual to an automated inventory management system. In this paper, some review of the classic and modern approaches to chemical inventory management system has been discussed. This paper also describe about both type of inventory management. After a comparative analysis of the traditional method and automated method, it can be said that both methods have some distinctive characteristics. Moreover, the automated inventory management method has higher accuracy of calculation because the calculations are handled by software, eliminating possible errors and saving time. The automated inventory system also allows users and administrators to track the availability, location and consumption of chemicals. The study of this paper can provide forceful review analysis support for the chemical inventory management related research.

Factors Influencing the Effectiveness of Inventory Management in Manufacturing SMEs

Science.gov (United States)

Chan, Shiau Wei; Tasmin, R.; Nor Aziati, A. H.; Zuraidah Rasi, Raja; Ismail, Fadillah Binti; Yaw, Li Ping

2017-08-01

Effectiveness of inventory management is a vital part in the manufacturing organization to be more competitive. The previous studies have indicated that there are several factors influencing the effectiveness of inventory management in the organization but there is lack of researchers who carried out the research in the manufacturing small medium enterprise in Johor. Therefore, the purpose of this research is to identify the problem of inventory management faced by the manufacturing small medium enterprise and also to determine the factors that will influence the effectiveness of inventory management. In completing this research, 80 employees were selected randomly from the manufacturing small medium enterprise in Batu Pahat, Johor and they were requested to complete questionnaires. The result have shown that the problems of inventory management faced by manufacturing organization were underproduction, overproduction, stock out situation, delays in the delivery of raw materials and discrepancy of records. The factors, documentation/store records, planning, knowledge of employees/staff skill have shown to significantly influence the effectiveness of inventory management while the funds have shown slightly significant influence on the inventory management in manufacturing small medium enterprises. This quantitative study is important to the manufacturing organization in Malaysia because it provides the guidelines to the employers of manufacturing small medium enterprises in Batu Pahat, Johor.

The Development of a Web Based Database Applications of Procurement, Inventory, and Sales at PT. Interjaya Surya Megah

OpenAIRE

Huda, Choirul; Hudyanto, Chendra; Sisillia, Sisillia; Persada, Revin Kencana

2011-01-01

The objective of this research is to develop a web based database application for the procurement, inventory and sales at PT. Interjaya Surya Megah. The current system at PT. Interjaya Surya Megah is running manually, so the company has difficulty in carrying out its activities. The methodology, that is used in this research, includes interviews, observation, literature review, conceptual database design, logical database design and physical database design. The results are the establishment ...

Fukushima Daiichi Radionuclide Inventories

Energy Technology Data Exchange (ETDEWEB)

Cardoni, Jeffrey N. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jankovsky, Zachary Kyle [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-09-01

Radionuclide inventories are generated to permit detailed analyses of the Fukushima Daiichi meltdowns. This is necessary information for severe accident calculations, dose calculations, and source term and consequence analyses. Inventories are calculated using SCALE6 and compared to values predicted by international researchers supporting the OECD/NEA's Benchmark Study on the Accident at Fukushima Daiichi Nuclear Power Station (BSAF). Both sets of inventory information are acceptable for best-estimate analyses of the Fukushima reactors. Consistent nuclear information for severe accident codes, including radionuclide class masses and core decay powers, are also derived from the SCALE6 analyses. Key nuclide activity ratios are calculated as functions of burnup and nuclear data in order to explore the utility for nuclear forensics and support future decommissioning efforts.

Integrated inventory ranking system for oilfield equipment industry

Directory of Open Access Journals (Sweden)

Jalel Ben Hmida

2014-01-01

Full Text Available Purpose: This case study is motivated by the subcontracting problem in an oilfield equipment and service company where the management needs to decide which parts to manufacture in-house when the capacity is not enough to make all required parts. Currently the company is making subcontracting decisions based on management’s experience. Design/methodology/approach: Working with the management, a decision support system (DSS is developed to rank parts by integrating three inventory classification methods considering both quantitative factors such as cost and demand, and qualitative factors such as functionality, efficiency, and quality. The proposed integrated inventory ranking procedure will make use of three classification methods: ABC, FSN, and VED. Findings: An integration mechanism using weights is developed to rank the parts based on the total priority scores. The ranked list generated by the system helps management to identify about 50 critical parts to manufacture in-house. Originality/value: The integration of all three inventory classification techniques into a single system is a unique feature of this research. This is important as it provides a more inclusive, big picture view of the DSS for management’s use in making business decisions.

The Implementation of Vendor Managed Inventory In the Supply Chain with Simple Probabilistic Inventory Model

Directory of Open Access Journals (Sweden)

Anna Ika Deefi

2016-01-01

Full Text Available Numerous studies show that the implementation of Vendor Managed Inventory (VMI benefits all members of the supply chain. This research develops model to prove the benefits obtained from implementing VMI to supplier-buyer partnership analytically. The model considers a two-level supply chain which consists of a single supplier and a single buyer. The analytical model is developed to supply chain inventory with probabilistic demand which follows normal distribution. The model also incorporates lead time as a decision variable and investigates the impacts of inventory management before and after the implementation of the VMI. The result shows that the analytical model has the ability to reduce the supply chain expected cost, improve the service level and increase the inventory replenishment. Numerical examples are given to prove them.

Design-Based Research

DEFF Research Database (Denmark)

Gynther, Karsten; Christensen, Ove; Petersen, Trine Brun

2012-01-01

I denne artikel introduceres Design Based Research for første gang på dansk i et videnskabeligt tidsskrift. Artiklen præsenterer de grundlæggende antagelser, som ligger til grund for Design Based Research-traditionen, og artiklen diskuterer de principper, som ligger til grund for gennemførelse af...... et DBR-forskningsprojekt. Med udgangspunkt i forsknings- og udviklingsprojektet ELYK: E-læring, Yderområder og Klyngedannelse, præsenteres den innovationsmodel, som projektet har udviklet med udgangspunkt i Design Based Research traditionen. ELYKs DBR innovationsmodel har vist sig effektiv i forhold...

Health Maintenance System (HMS) Hardware Research, Design, and Collaboration

Science.gov (United States)

Gonzalez, Stefanie M.

2010-01-01

The Space Life Sciences division (SLSD) concentrates on optimizing a crew member's health. Developments are translated into innovative engineering solutions, research growth, and community awareness. This internship incorporates all those areas by targeting various projects. The main project focuses on integrating clinical and biomedical engineering principles to design, develop, and test new medical kits scheduled for launch in the Spring of 2011. Additionally, items will be tagged with Radio Frequency Interference Devices (RFID) to keep track of the inventory. The tags will then be tested to optimize Radio Frequency feed and feed placement. Research growth will occur with ground based experiments designed to measure calcium encrusted deposits in the International Space Station (ISS). The tests will assess the urine calcium levels with Portable Clinical Blood Analyzer (PCBA) technology. If effective then a model for urine calcium will be developed and expanded to microgravity environments. To support collaboration amongst the subdivisions of SLSD the architecture of the Crew Healthcare Systems (CHeCS) SharePoint site has been redesigned for maximum efficiency. Community collaboration has also been established with the University of Southern California, Dept. of Aeronautical Engineering and the Food and Drug Administration (FDA). Hardware disbursements will transpire within these communities to support planetary surface exploration and to serve as an educational tool demonstrating how ground based medicine influenced the technological development of space hardware.

Teaching engineering design research

DEFF Research Database (Denmark)

Blessing, Lucienne; Andreasen, Mogens Myrup

2005-01-01

The importance og engineering design as an industrial activity, and the increasingly complex and dynamic context in which it takes place, has led to the wish to improve the effectiveness and efficiency of engineering design in practice as well as in education. Although attempts have been made...... to improve design for centuries, it was not until well in the second half of the 20th century that engineering design became a research topic (see pahl and Beitz (1996), Heymann (2004) for historical overviews). Engineering research, such as research into thermodynamics, mechanics and materials, has a much...... by PhD students. This has created the demand for a clear, efficient way of learning the crafmanship of doing design research, a demand which is in strong contrast to the state of design research in general. This article reflects the authors' efforts in running a summer school om engineering design...

From Inventory to Insight: Making Sense of the Global Landscape of Higher Education Research, Training, and Publication

Science.gov (United States)

Rumbley, Laura E.; Stanfield, David A.; de Gayardon, Ariane

2014-01-01

Through a yearlong study, the Boston College Center for International Higher Education developed a (third edition) global inventory of higher education research centers/institutes, academic programs, and journals/publications. As higher education expands globally, these resources are essential for training effective leaders and producing research…

Synthesizing Knowledge in Design Research

DEFF Research Database (Denmark)

Piirainen, Kalle A.

2016-01-01

The chapter discusses knowledge synthesis in design research, bringing together the perspectives of experimental design research, or Research in Design Context that is treated extensively elsewhere in this book, and Design Inclusive Research as well as Practice-based Design Research. Specific...... attention is paid to the question of how practice-based or problem-driven design research processes can be rigorous and yield contributions to knowledge. The main argument in this chapter is that a key to knowledge synthesis and scientific contribution is setting explicit design propositions...... that are instantiated within design artefacts, and evaluated rigorously. The chapter starts with a discussion of knowledge creation and synthesis within design research.Following this, the chapter moves on to focus on setting a methodological framework for deriving design propositions. Lastly the chapter elaborates...

Vascular Plant and Vertebrate Inventory of Chiricahua National Monument

Science.gov (United States)

Powell, Brian F.; Schmidt, Cecilia A.; Halvorson, William L.; Anning, Pamela

2009-01-01

This report summarizes the results of the first comprehensive inventory of vascular plants and vertebrates at Chiricahua National Monument (NM) in Arizona. This project was part of a larger effort to inventory vascular plants and vertebrates in eight National Park Service units in the Sonoran Desert Network of parks in Arizona and New Mexico. In 2002, 2003, and 2004 we surveyed for plants and vertebrates (amphibians, reptiles, birds, and mammals) at Chiricahua NM to document the presence of species within the boundaries of the monument. Because we used repeatable study designs and standardized field methods, these inventories can serve as the first step in a biological monitoring program for the monument. This report is also the first summary of previous research from the monument and therefore it provides an important overview of survey efforts to date. We used data from our inventory and previous research to compile complete species lists for the monument and to assess inventory completeness. We recorded a total of 424 species, including 37 not previously found at the monument (Table 1). We found 10 species of non-native plants and one non-native mammal. Most non-native plants were found along the western boundary of the monument. Based on a review of our inventory and past research at the monument, there have been a total of 1,137 species of plants and vertebrates found at the monument. We believe the inventories of vascular plants and vertebrates are nearly complete and that the monument has one of the most complete inventories of any unit in the Sonoran Desert Network. The mammal community at the monument had the highest species richness (69 species) and the amphibian and reptile community was among the lowest species richness (33 species) of any park in the Sonoran Desert Network. Species richness of the plant and bird communities was intermediate. Among the important determinants of species richness for all groups is the geographic location of the monument

A project on groundwater research inventory and classification to make groundwater visible

Science.gov (United States)

Cseko, Adrienn; Petitta, Marco; van der Keur, Peter; Fernandez, Isabel; Garcia Alibrandi, Clint; Hinsby, Klaus; Hartai, Eva; Garcia Padilla, Mercedes; Szucs, Peter; Mikita, Viktoria; Bisevac, Vanja; Bodo, Balazs

2017-04-01

Hydrogeology related research activities cover a wide spectrum of research areas at EU and national levels. The European knowledge base on this important topic is widespread and fragmented into broader programs generally related to waterresources, environment or ecology. In order to achieve a comprehensive understanding on the groundwater theme, the KINDRA project (Knowledge Inventory for Hydrogeology Research - www.kindraproject.eu) seeks to carry out an accurate assessment of the state of the art in hydrogeology research and to create a critical mass for scientific knowledge exchange of hydrogeology research, to ensure wide accessibility and applicability of research results, including support of innovation and development, and to reduce unnecessary duplication of efforts. The first two years of the project have focused its efforts in developing the concept of a Harmonized Terminology and Methodology for Classification and Reporting Hydrogeology related Research in Europe (HRCSYS) as well as its implementation in the European Inventory of Groundwater Research (EIGR). For developing the common terminology, keywords characterizing research on groundwater have been identified from two main sources: the most important EU directives and policy documents and from groundwater related scientific literature. To assess the importance and pertinence of the keywords, these have been ranked by performing searches via the Web of Science, Scopus and Google Scholar search engines. The complete merged list of keywords consisting of more than 200 terms has been organized in a tree hierarchy, identifying three main categories: Societal Challenges (SC), Operational Actions (OA) and Research Topics (RT). The relationships among these main categories expressed by a 3D approach, identifying single intersections among 5 main overarching groups for each category. The EIGR itself contains metadata (about 1800 records at the moment) of research efforts and topic related knowledge

Reflecting Contemporary Design Research

DEFF Research Database (Denmark)

Engholm, Ida

2017-01-01

In recent years, design research has been the object of growing attention in universities and academies throughout the world. The present paper addresses the heterogeneous character of design research and the current need for reflection on the various approaches and interests. For this purpose......, the paper follows two steps. First, it proposes a categorization of the field in the form of a position model. The paper’s underlying assumption is that design research as a discipline exists in many different forms that cannot necessarily be brought together under one common academic research tradition......; instead it is necessary to attempt to define the field in order to initiate discussions about what constitutes the various research bases for design. Second, the paper discusses the implication for future design research when it is an interdisciplinary field that involves many disciplines, mindsets...

Development of the Statistical Reasoning in Biology Concept Inventory (SRBCI)

Science.gov (United States)

Deane, Thomas; Nomme, Kathy; Jeffery, Erica; Pollock, Carol; Birol, Gülnur

2016-01-01

We followed established best practices in concept inventory design and developed a 12-item inventory to assess student ability in statistical reasoning in biology (Statistical Reasoning in Biology Concept Inventory [SRBCI]). It is important to assess student thinking in this conceptual area, because it is a fundamental requirement of being…

Reflections on Design-Based Research

DEFF Research Database (Denmark)

Ørngreen, Rikke

2015-01-01

Design-Based Research is an intervention method that researches educational design (products or processes) in real-life settings with the dual purpose of generating theories about the domain and develop the design iteratively. This paper is an integrative review with a personal ethnographic...... narrative that draws on Design-Based Research literature, and identifies and discusses elements from Interaction Design and Action Research that the Design-Based Research approach could apply, situating the research in online educational projects, where participants are distributed in time and space...

78 FR 21399 - Notice of Inventory Completion: Center for Archaeological Research at the University of Texas at...

Science.gov (United States)

2013-04-10

...-PPWOCRADN0] Notice of Inventory Completion: Center for Archaeological Research at the University of Texas at San Antonio, TX AGENCY: National Park Service, Interior. ACTION: Notice. SUMMARY: The Center for... consultation with the appropriate Indian tribe, and has determined that there is a cultural affiliation between...

Inventory Control System by Using Vendor Managed Inventory (VMI)

Science.gov (United States)

Sabila, Alzena Dona; Mustafid; Suryono

2018-02-01

The inventory control system has a strategic role for the business in managing inventory operations. Management of conventional inventory creates problems in the stock of goods that often runs into vacancies and excess goods at the retail level. This study aims to build inventory control system that can maintain the stability of goods availability at the retail level. The implementation of Vendor Managed Inventory (VMI) method on inventory control system provides transparency of sales data and inventory of goods at retailer level to supplier. Inventory control is performed by calculating safety stock and reorder point of goods based on sales data received by the system. Rule-based reasoning is provided on the system to facilitate the monitoring of inventory status information, thereby helping the process of inventory updates appropriately. Utilization of SMS technology is also considered as a medium of collecting sales data in real-time due to the ease of use. The results of this study indicate that inventory control using VMI ensures the availability of goods ± 70% and can reduce the accumulation of goods ± 30% at the retail level.

Field nondestructive assay measurements as applied to process inventories

International Nuclear Information System (INIS)

Westsik, G.A.

1979-08-01

An annual process equipment holdup inventory measurement program for a plutonium processing plant was instituted by Rockwell Hanford Operations (Rockwell) at Richland, Washington. The inventories, performed in 1977 and 1978, were designed to improve plutonium accountability and control. The inventory method used field nondestructive assay (NDA) measurement techniques with portable electronics and sodium iodide detectors. Access to and movement of plutonium in work areas was curtailed during the inventory process using administrative controls. Comparison of the two annual inventories showed good reproducibility of results within the calculated error ranges. For items where no plutonium movement occurred and which contained greater than 20 grams plutonium, the average measurement difference between the two inventories was 22%. The procedures and equipment used and the operational experience from the inventories are described

Empirical research through design

NARCIS (Netherlands)

Keyson, D.V.; Bruns, M.

2009-01-01

This paper describes the empirical research through design method (ERDM), which differs from current approaches to research through design by enforcing the need for the designer, after a series of pilot prototype based studies, to a-priori develop a number of testable interaction design hypothesis

Designing ordering and inventory management methodologies for purchased parts

NARCIS (Netherlands)

de Boer, L.; Looman, Arnold; Ruffini, F.A.J.

2002-01-01

This article presents a method for redesigning the ordering and inventory management methodologies for purchased parts in a manufacturing firm. The method takes the perspective of the purchasing and logistics manager, defines clusters of purchased items, and subsequently assigns each cluster to a

Optimal Control Inventory Stochastic With Production Deteriorating

Science.gov (United States)

Affandi, Pardi

2018-01-01

In this paper, we are using optimal control approach to determine the optimal rate in production. Most of the inventory production models deal with a single item. First build the mathematical models inventory stochastic, in this model we also assume that the items are in the same store. The mathematical model of the problem inventory can be deterministic and stochastic models. In this research will be discussed how to model the stochastic as well as how to solve the inventory model using optimal control techniques. The main tool in the study problems for the necessary optimality conditions in the form of the Pontryagin maximum principle involves the Hamilton function. So we can have the optimal production rate in a production inventory system where items are subject deterioration.

The analysis for inventory of experimental reactor high temperature gas reactor type

International Nuclear Information System (INIS)

Sri Kuntjoro; Pande Made Udiyani

2016-01-01

Relating to the plan of the National Nuclear Energy Agency (BATAN) to operate an experimental reactor of High Temperature Gas Reactors type (RGTT), it is necessary to reactor safety analysis, especially with regard to environmental issues. Analysis of the distribution of radionuclides from the reactor into the environment in normal or abnormal operating conditions starting with the estimated reactor inventory based on the type, power, and operation of the reactor. The purpose of research is to analyze inventory terrace for Experimental Power Reactor design (RDE) high temperature gas reactor type power 10 MWt, 20 MWt and 30 MWt. Analyses were performed using ORIGEN2 computer code with high temperatures cross-section library. Calculation begins with making modifications to some parameter of cross-section library based on the core average temperature of 570 °C and continued with calculations of reactor inventory due to RDE 10 MWt reactor power. The main parameters of the reactor 10 MWt RDE used in the calculation of the main parameters of the reactor similar to the HTR-10 reactor. After the reactor inventory 10 MWt RDE obtained, a comparison with the results of previous researchers. Based upon the suitability of the results, it make the design for the reactor RDE 20MWEt and 30 MWt to obtain the main parameters of the reactor in the form of the amount of fuel in the pebble bed reactor core, height and diameter of the terrace. Based on the main parameter or reactor obtained perform of calculation to get reactor inventory for RDE 20 MWT and 30 MWT with the same methods as the method of the RDE 10 MWt calculation. The results obtained are the largest inventory of reactor RDE 10 MWt, 20 MWt and 30 MWt sequentially are to Kr group are about 1,00E+15 Bq, 1,20E+16 Bq, 1,70E+16 Bq, for group I are 6,50E+16 Bq, 1,20E+17 Bq, 1,60E+17 Bq and for groups Cs are 2,20E+16 Bq, 2,40E+16 Bq, 2,60E+16 Bq. Reactor inventory will then be used to calculate the reactor source term and it

Inventory Control System by Using Vendor Managed Inventory (VMI

Directory of Open Access Journals (Sweden)

Dona Sabila Alzena

2018-01-01

Full Text Available The inventory control system has a strategic role for the business in managing inventory operations. Management of conventional inventory creates problems in the stock of goods that often runs into vacancies and excess goods at the retail level. This study aims to build inventory control system that can maintain the stability of goods availability at the retail level. The implementation of Vendor Managed Inventory (VMI method on inventory control system provides transparency of sales data and inventory of goods at retailer level to supplier. Inventory control is performed by calculating safety stock and reorder point of goods based on sales data received by the system. Rule-based reasoning is provided on the system to facilitate the monitoring of inventory status information, thereby helping the process of inventory updates appropriately. Utilization of SMS technology is also considered as a medium of collecting sales data in real-time due to the ease of use. The results of this study indicate that inventory control using VMI ensures the availability of goods ± 70% and can reduce the accumulation of goods ± 30% at the retail level.

Gridded National Inventory of U.S. Methane Emissions

Science.gov (United States)

Maasakkers, Joannes D.; Jacob, Daniel J.; Sulprizio, Melissa P.; Turner, Alexander J.; Weitz, Melissa; Wirth, Tom; Hight, Cate; DeFigueiredo, Mark; Desai, Mausami; Schmeltz, Rachel;

Inventory Control System by Using Vendor Managed Inventory (VMI)

OpenAIRE

Dona Sabila Alzena; Mustafid Mustafid; Suryono Suryono

2018-01-01

The inventory control system has a strategic role for the business in managing inventory operations. Management of conventional inventory creates problems in the stock of goods that often runs into vacancies and excess goods at the retail level. This study aims to build inventory control system that can maintain the stability of goods availability at the retail level. The implementation of Vendor Managed Inventory (VMI) method on inventory control system provides transparency of sales data an...

An overview of research designs relevant to nursing: Part 1: quantitative research designs

OpenAIRE

Sousa,Valmi D.; Driessnack,Martha; Mendes,Isabel Amélia Costa

2007-01-01

This three part series of articles provides a brief overview of relevant research designs in nursing. The first article in the series presents the most frequently used quantitative research designs. Strategies for non-experimental and experimental research designs used to generate and refine nursing knowledge are described. In addition, the importance of quantitative designs and the role they play in developing evidence-based practice are discussed. Nursing care needs to be determined by the ...

Development of the Statistical Reasoning in Biology Concept Inventory (SRBCI)

Science.gov (United States)

Deane, Thomas; Nomme, Kathy; Jeffery, Erica; Pollock, Carol; Birol, Gülnur

2016-01-01

We followed established best practices in concept inventory design and developed a 12-item inventory to assess student ability in statistical reasoning in biology (Statistical Reasoning in Biology Concept Inventory [SRBCI]). It is important to assess student thinking in this conceptual area, because it is a fundamental requirement of being statistically literate and associated skills are needed in almost all walks of life. Despite this, previous work shows that non–expert-like thinking in statistical reasoning is common, even after instruction. As science educators, our goal should be to move students along a novice-to-expert spectrum, which could be achieved with growing experience in statistical reasoning. We used item response theory analyses (the one-parameter Rasch model and associated analyses) to assess responses gathered from biology students in two populations at a large research university in Canada in order to test SRBCI’s robustness and sensitivity in capturing useful data relating to the students’ conceptual ability in statistical reasoning. Our analyses indicated that SRBCI is a unidimensional construct, with items that vary widely in difficulty and provide useful information about such student ability. SRBCI should be useful as a diagnostic tool in a variety of biology settings and as a means of measuring the success of teaching interventions designed to improve statistical reasoning skills. PMID:26903497

Purchasing and inventory management techniques for optimizing inventory investment

International Nuclear Information System (INIS)

McFarlane, I.; Gehshan, T.

1993-01-01

In an effort to reduce operations and maintenance costs among nuclear plants, many utilities are taking a closer look at their inventory investment. Various approaches for inventory reduction have been used and discussed, but these approaches are often limited to an inventory management perspective. Interaction with purchasing and planning personnel to reduce inventory investment is a necessity in utility efforts to become more cost competitive. This paper addresses the activities that purchasing and inventory management personnel should conduct in an effort to optimize inventory investment while maintaining service-level goals. Other functions within a materials management organization, such as the warehousing and investment recovery functions, can contribute to optimizing inventory investment. However, these are not addressed in this paper because their contributions often come after inventory management and purchasing decisions have been made

Factor structure of the Edinburgh Handedness Inventory versus the Fazio Laterality Inventory in a population with established atypical handedness.

Science.gov (United States)

Fazio, Rachel L; Cantor, James M

2015-01-01

The Edinburgh Handedness Inventory (EHI) has consistently remained the most used handedness inventory despite its limitations. The psychometric properties of handedness inventories, however, are increasingly important due to their use in matching groups for neuroimaging research. This study compared the performance of the EHI and the Fazio Laterality Inventory (FLI) in a population with atypical handedness. Whereas the EHI demonstrated a single-factor loading in this population, the FLI's previously demonstrated single factor dissociated into two factors: fine motor/ballistic movements and expressive/instrumental movements. This dissociation is similar to that seen when tests of cognitive constructs--which tend to load on a single factor in intact populations--dissociate when administered to populations with difficulties in the assessed domain. This pattern of performance lends further support for the use of the FLI to more accurately assess handedness. Future research in other populations with atypical laterality may illuminate additional factors of the FLI.

Empirical Research In Engineering Design

DEFF Research Database (Denmark)

Ahmed, Saeema

2007-01-01

Increasingly engineering design research involves the use of empirical studies that are conducted within an industrial environment [Ahmed, 2001; Court 1995; Hales 1987]. Research into the use of information by designers or understanding how engineers build up experience are examples of research...... of research issues. This paper describes case studies of empirical research carried out within industry in engineering design focusing upon information, knowledge and experience in engineering design. The paper describes the research methods employed, their suitability for the particular research aims...

Item response theory analysis of Working Alliance Inventory, revised response format, and new Brief Alliance Inventory.

Science.gov (United States)

Mallinckrodt, Brent; Tekie, Yacob T

2016-11-01

The Working Alliance Inventory (WAI) has made great contributions to psychotherapy research. However, studies suggest the 7-point response format and 3-factor structure of the client version may have psychometric problems. This study used Rasch item response theory (IRT) to (a) improve WAI response format, (b) compare two brief 12-item versions (WAI-sr; WAI-s), and (c) develop a new 16-item Brief Alliance Inventory (BAI). Archival data from 1786 counseling center and community clients were analyzed. IRT findings suggested problems with crossed category thresholds. A rescoring scheme that combines neighboring responses to create 5- and 4-point scales sharply reduced these problems. Although subscale variance was reduced by 11-26%, rescoring yielded improved reliability and generally higher correlations with therapy process (session depth and smoothness) and outcome measures (residual gain symptom improvement). The 16-item BAI was designed to maximize "bandwidth" of item difficulty and preserve a broader range of WAI sensitivity than WAI-s or WAI-sr. Comparisons suggest the BAI performed better in several respects than the WAI-s or WAI-sr and equivalent to the full WAI on several performance indicators.

Shortening the xerostomia inventory

NARCIS (Netherlands)

Thomson, W.M.; Putten, G.J. van der; Baat, C. de; Ikebe, K.; Matsuda, K.; Enoki, K.; Hopcraft, M.S.; Ling, G.Y.

2011-01-01

OBJECTIVES: The aim of this study was to determine the validity and properties of the Summated Xerostomia Inventory-Dutch Version in samples from Australia, The Netherlands, Japan, and New Zealand. STUDY DESIGN: Six cross-sectional samples of older people from The Netherlands (n = 50), Australia (n

Optimization of Inventory

OpenAIRE

PROKOPOVÁ, Nikola

2017-01-01

The subject of this thesis is optimization of inventory in selected organization. Inventory optimization is a very important topic in each organization because it reduces storage costs. At the beginning the inventory theory is presented. It shows the meaning and types of inventory, inventory control and also different methods and models of inventory control. Inventory optimization in the enterprise can be reached by using models of inventory control. In the second part the company on which is...

Developing theory-driven design research

DEFF Research Database (Denmark)

Cash, Philip J.

2018-01-01

Design research is increasingly weak in comparison with other fields; without action to increase scientific, theoretical, and methodological rigour there is a real possibility of the field being superseded and becoming obsolete through lack of impact. The aim of this paper is to show how design r....... I identify key learning indicating future directions for theory-driven design research. I conclude by providing some concrete recommendations for the field of design research and individual design researchers....

What Is This Thing Called "Design" in Design Research and Instructional Design

Science.gov (United States)

Cronje, Johannes

2013-01-01

This paper will consider the phenomenon of design research. It will then consider four research positions in social science research. The paper will show how the design perspectives map onto the research paradigms and how by rotating through these paradigms, a design research cycle is formed. Finally, the paper will discuss four research questions…

Constructive Synergy in Design Science Research: A Comparative Analysis of Design Science Research and the Constructive Research Approach

DEFF Research Database (Denmark)

Piirainen, Kalle; Gonzalez, Rafael A.

2014-01-01

Information systems research is focused on creating knowledge which can be applied in organizations. Design science research, which specifically aims at applying existing knowledge to solve interesting and relevant business problems, has been steadily gaining support in information systems research....... However, design science research is not the only design-oriented research framework available. Accordingly, this raises the question of whether there is something to learn between the different approaches. This paper contributes to answering this question by comparing design science research...... with the constructive research approach. The conclusion is that the two approaches are similar and compatible, save for details in practical requirements and partly underlying philosophical assumptions. The main finding that arises from the comparison is, however, that there is a potential problem in claiming knowledge...

Constructive Synergy in Design Science Research: A Comparative Analysis of Design Science Research and the Constructive Research Approach

DEFF Research Database (Denmark)

Piirainen, Kalle; Gonzalez, Rafael A.

2014-01-01

with the constructive research approach. The conclusion is that the two approaches are similar and compatible, save for details in practical requirements and partly underlying philosophical assumptions. The main finding that arises from the comparison is, however, that there is a potential problem in claiming knowledge......Information systems research is focused on creating knowledge which can be applied in organizations. Design science research, which specifically aims at applying existing knowledge to solve interesting and relevant business problems, has been steadily gaining support in information systems research....... However, design science research is not the only design-oriented research framework available. Accordingly, this raises the question of whether there is something to learn between the different approaches. This paper contributes to answering this question by comparing design science research...

Participatory design based research

DEFF Research Database (Denmark)

Dau, Susanne; Bach Jensen, Louise; Falk, Lars

This poster reveal how participatory design based research by the use of a CoED inspired creative process can be used for designing solutions to problems regarding students study activities outside campus.......This poster reveal how participatory design based research by the use of a CoED inspired creative process can be used for designing solutions to problems regarding students study activities outside campus....

Joint inventory control and pricing in a service-inventory system

DEFF Research Database (Denmark)

Marand, Ata Jalili; Li, Hongyan Jenny; Thorstenson, Anders

2017-01-01

This study addresses joint inventory control and pricing decisions for a service-inventory system. In such a system both an on-hand inventory item and a positive service time are required to fulfill customer demands. The service-inventory system also captures main features of the classical...... inventory systems with a positive processing time, e.g., make-to-order systems. In this study, the service-inventory system is modeled as an M/M/1 queue in which the customer arrival rate is price dependent. The inventory of an individual item is continuously reviewed under an (r,Q) policy....... The replenishment lead times of the inventory are exponentially distributed. Furthermore, customers arriving during stock-out periods are lost. The stochastic customer inter-arrival times, service times, and inventory replenishment lead times cause the high complexity of the problem and the difficulty in solving it...

Designing and Implementing an Ergonomics Inventory to Improve Management of Human Factors Programs.

Science.gov (United States)

Johnson, Kenneth A.

Self-report ergometric inventories can provide valuable information to employers and can serve as a means of intervention to improve employee attributes. Based on the science of ergonomics (a science that studies the natural laws of work in order to maximize human efficiency in job performance), such an inventory focuses on the interaction of the…

Inventory management and control at the central distribution center for Univar Products International B.V.

NARCIS (Netherlands)

Pholnukulkit, Pimara

2008-01-01

This report presents the outcome of the Logistics Design Project carried out for Univar Products International B.V. The goal of this project is to design an inventory control system and implement an inventory control tool that supports decisions in managing inventory of all products in the central

Canada`s greenhouse gas emissions inventory

Energy Technology Data Exchange (ETDEWEB)

Jaques, A. [Environment Canada, Ottawa, ON (Canada)

1998-09-01

In 1994, Canada was the seventh largest global emitter of CO{sub 2}. The Kyoto Protocol has made it necessary to continue to improve methods for developing emissions inventories. An emissions inventory was defined as `a comprehensive account of air pollutant emissions and associated data from sources within the inventory area over a specified time frame that can be used to determine the effect of emissions on the environment`. The general approach is to compile large-scale emission estimates under averaged conditions for collective sources and sectors, using data that is available on a sectoral, provincial and national basis. Ideally, continuous emission monitors should be used to develop emissions inventories. Other needed improvements include additional research on emissions data, and increased support for international negotiations on reporting policies and related methodologies, verification procedures and adjustments. 1 ref., 5 figs.

The Training Evaluation Inventory (TEI)--Evaluation of Training Design and Measurement of Training Outcomes for Predicting Training Success

Science.gov (United States)

Ritzmann, Sandrina; Hagemann, Vera; Kluge, Annette

2014-01-01

Training evaluation in research and organisational contexts is vital to ensure informed decisions regarding the value of training. The present study describes the development of a valid and reliable training evaluation inventory (TEI), as it does not exist so far. The objectives were a) to construct an instrument that is theoretically and…

Practical Policy Applications of Uncertainty Analysis for National Greenhouse Gas Inventories

International Nuclear Information System (INIS)

Gillenwater, M.; Sussman, F.; Cohen, J.

2007-01-01

International policy makers and climate researchers use greenhouse gas emissions inventory estimates in a variety of ways. Because of the varied uses of the inventory data, as well as the high uncertainty surrounding some of the source category estimates, considerable effort has been devoted to understanding the causes and magnitude of uncertainty in national emissions inventories. In this paper, we focus on two aspects of the rationale for quantifying uncertainty: (1) the possible uses of the quantified uncertainty estimates for policy (e.g., as a means of adjusting inventories used to determine compliance with international commitments); and (2) the direct benefits of the process of investigating uncertainties in terms of improving inventory quality. We find that there are particular characteristics that an inventory uncertainty estimate should have if it is to be used for policy purposes: (1) it should be comparable across countries; (2) it should be relatively objective, or at least subject to review and verification; (3) it should not be subject to gaming by countries acting in their own self-interest; (4) it should be administratively feasible to estimate and use; (5) the quality of the uncertainty estimate should be high enough to warrant the additional compliance costs that its use in an adjustment factor may impose on countries; and (6) it should attempt to address all types of inventory uncertainty. Currently, inventory uncertainty estimates for national greenhouse gas inventories do not have these characteristics. For example, the information used to develop quantitative uncertainty estimates for national inventories is often based on expert judgments, which are, by definition, subjective rather than objective, and therefore difficult to review and compare. Further, the practical design of a potential factor to adjust inventory estimates using uncertainty estimates would require policy makers to (1) identify clear environmental goals; (2) define these

Practical Policy Applications of Uncertainty Analysis for National Greenhouse Gas Inventories

Energy Technology Data Exchange (ETDEWEB)

Gillenwater, M. [Environmental Resources Trust (United States)], E-mail: mgillenwater@ert.net; Sussman, F.; Cohen, J. [ICF International (United States)

2007-09-15

International policy makers and climate researchers use greenhouse gas emissions inventory estimates in a variety of ways. Because of the varied uses of the inventory data, as well as the high uncertainty surrounding some of the source category estimates, considerable effort has been devoted to understanding the causes and magnitude of uncertainty in national emissions inventories. In this paper, we focus on two aspects of the rationale for quantifying uncertainty: (1) the possible uses of the quantified uncertainty estimates for policy (e.g., as a means of adjusting inventories used to determine compliance with international commitments); and (2) the direct benefits of the process of investigating uncertainties in terms of improving inventory quality. We find that there are particular characteristics that an inventory uncertainty estimate should have if it is to be used for policy purposes: (1) it should be comparable across countries; (2) it should be relatively objective, or at least subject to review and verification; (3) it should not be subject to gaming by countries acting in their own self-interest; (4) it should be administratively feasible to estimate and use; (5) the quality of the uncertainty estimate should be high enough to warrant the additional compliance costs that its use in an adjustment factor may impose on countries; and (6) it should attempt to address all types of inventory uncertainty. Currently, inventory uncertainty estimates for national greenhouse gas inventories do not have these characteristics. For example, the information used to develop quantitative uncertainty estimates for national inventories is often based on expert judgments, which are, by definition, subjective rather than objective, and therefore difficult to review and compare. Further, the practical design of a potential factor to adjust inventory estimates using uncertainty estimates would require policy makers to (1) identify clear environmental goals; (2) define these

Optimization of Inventories for Multiple Companies by Fuzzy Control Method

OpenAIRE

Kawase, Koichi; Konishi, Masami; Imai, Jun

2008-01-01

In this research, Fuzzy control theory is applied to the inventory control of the supply chain between multiple companies. The proposed control method deals with the amountof inventories expressing supply chain between multiple companies. Referring past demand and tardiness, inventory amounts of raw materials are determined by Fuzzy inference. The method that an appropriate inventory control becomes possible optimizing fuzzy control gain by using SA method for Fuzzy control. The variation of ...

Investigating Design Research Landscapes through Exhibition

DEFF Research Database (Denmark)

Jönsson, Li; Hansen, Flemming Tvede; Mäkelä, Maarit

2013-01-01

What characterizes a design research exhibition compared to a traditional design and art exhibition? How do you show the very materialities of the design experiments as a means for communicating knowledge of research and of practice? How do you present, review and utilize such an exhibition......? With those questions in mind, the intention and challenge for the Nordes 2013 Design Research Exhibition was to expand on current notions of staging research enquires in design research conference contexts. Artefacts, installations, performances, and other materialities that relate to the theme...... of the conference - Experiments in Design Research – were displayed as tools to express and communicate different design research enquires. Through this paper we will describe the Nordes exhibition as a specific case that renders questions visible in relation to how to utilize a design research exhibition...

Vascular Plant and Vertebrate Inventory of Saguaro National Park, Rincon Mountain District

Science.gov (United States)

Powell, Brian F.; Halvorson, William Lee; Schmidt, Cecilia A.

2006-01-01

Executive Summary This report summarizes the results of the first comprehensive inventory of plants and vertebrates at the Rincon Mountain District (RMD) of Saguaro National Park, Arizona. From 2001 to 2003 we surveyed for vascular plants and vertebrates (amphibians, reptiles, birds, and mammals) at the district to document the presence of species within its boundaries. Park staff also surveyed for medium and large mammals using infrared-triggered cameras from 1999 to 2005. This report summarizes the methods and results of these two efforts. Our spatial sampling design was ambitious and was one of the first of its kind in the region to colocate study sites for vegetation and vertebrates using a stratified random design. We also chose the location of some study sites non-randomly in areas that we thought would have the highest species richness. Because we used repeatable study designs and standardized field methods, these inventories can serve as the first step in a biological monitoring program for the district. We also provide an important overview of most previous survey efforts in the district. We use data from our inventory and other surveys to compile species lists and to assess inventory completeness. With the exception of plants, our survey effort was the most comprehensive ever undertaken in the district. We recorded a total of 801 plant and vertebrate species, including 50 species not previously found in the district (Table 1) of which five (all plants) are non-native species. Based on a review of our inventory and past research at the district, there have been a total of 1,479 species of plants and vertebrates found there. We believe inventories for all taxonomic groups are nearly complete. In particular, the plant, amphibian and reptile, and mammal species lists are the most complete of any comparably large natural area of the 'sky island' region of southern Arizona and adjacent Mexico. For each taxon-specific chapter we discuss patterns of species

Research design: the methodology for interdisciplinary research framework.

Science.gov (United States)

Tobi, Hilde; Kampen, Jarl K

2018-01-01

Many of today's global scientific challenges require the joint involvement of researchers from different disciplinary backgrounds (social sciences, environmental sciences, climatology, medicine, etc.). Such interdisciplinary research teams face many challenges resulting from differences in training and scientific culture. Interdisciplinary education programs are required to train truly interdisciplinary scientists with respect to the critical factor skills and competences. For that purpose this paper presents the Methodology for Interdisciplinary Research (MIR) framework. The MIR framework was developed to help cross disciplinary borders, especially those between the natural sciences and the social sciences. The framework has been specifically constructed to facilitate the design of interdisciplinary scientific research, and can be applied in an educational program, as a reference for monitoring the phases of interdisciplinary research, and as a tool to design such research in a process approach. It is suitable for research projects of different sizes and levels of complexity, and it allows for a range of methods' combinations (case study, mixed methods, etc.). The different phases of designing interdisciplinary research in the MIR framework are described and illustrated by real-life applications in teaching and research. We further discuss the framework's utility in research design in landscape architecture, mixed methods research, and provide an outlook to the framework's potential in inclusive interdisciplinary research, and last but not least, research integrity.

The use of remote sensing for updating extensive forest inventories

Science.gov (United States)

John F. Kelly

1990-01-01

The Forest Inventory and Analysis unit of the USDA Forest Service Southern Forest Experiment Station (SO-FIA) has the research task of devising an inventory updating system that can be used to provide reliable estimates of forest area, volume, growth, and removals at the State level. These updated inventories must be accomplished within current budgetary restraints....

The Design Researcher in Quandary

DEFF Research Database (Denmark)

Kinch, Sofie; Fogtman, Majken Hillerup

2011-01-01

In the field of practice-based research we articulate the dilemma that emerges as the creative designer embraces the role of being an interaction design researcher. We exemplify the dilemma in a specific design case originating from a PhD project. In this case, we use sketching to illustrate how...... the design researcher embodies the creative designer at all times. We show how the dilemma becomes tangible in the conversation with the material when having to manage a set of design constraints, concerns and sensibilities. We acknowledge that when taking on both roles at the same time there are two...

Reflections on Design Methodology Research

DEFF Research Database (Denmark)

2011-01-01

We shall reflect on the results of Design Methodology research and their impact on design practice. In the past 50 years the number of researchers in the field has expanded enormously – as has the number of publications. During the same period design practice and its products have changed...... and produced are also now far more complex and distributed, putting designers under ever increasing pressure. We shall address the question: Are the results of Design Methodology research appropriate and are they delivering the expected results in design practice? In our attempt to answer this question we...

Sharing Video Datasets in Design Research

DEFF Research Database (Denmark)

Christensen, Bo; Abildgaard, Sille Julie Jøhnk

2017-01-01

This paper examines how design researchers, design practitioners and design education can benefit from sharing a dataset. We present the Design Thinking Research Symposium 11 (DTRS11) as an exemplary project that implied sharing video data of design processes and design activity in natural settings...... with a large group of fellow academics from the international community of Design Thinking Research, for the purpose of facilitating research collaboration and communication within the field of Design and Design Thinking. This approach emphasizes the social and collaborative aspects of design research, where...... a multitude of appropriate perspectives and methods may be utilized in analyzing and discussing the singular dataset. The shared data is, from this perspective, understood as a design object in itself, which facilitates new ways of working, collaborating, studying, learning and educating within the expanding...

Applying inventory classification to a large inventory management system

Directory of Open Access Journals (Sweden)

Benjamin Isaac May

2017-06-01

Full Text Available Inventory classification aims to ensure that business-driving inventory items are efficiently managed in spite of constrained resources. There are numerous single- and multiple-criteria approaches to it. Our objective is to improve resource allocation to focus on items that can lead to high equipment availability. This concern is typical of many service industries such as military logistics, airlines, amusement parks and public works. Our study tests several inventory prioritization techniques and finds that a modified multi-criterion weighted non-linear optimization (WNO technique is a powerful approach for classifying inventory, outperforming traditional techniques of inventory prioritization such as ABC analysis in a variety of performance objectives.

Dynamics of Research through Design

DEFF Research Database (Denmark)

Basballe, Ditte Amund; Halskov, Kim

2012-01-01

In this paper, we investigate Research through Design at a micro-level, by addressing the dynamic interplay of research and design as they unfold throughout a design process. As our principal case, we consider the design of a three-dimensional projection installation, a process that unfolded over...... a one-year period. We analyse material collected from 18 key events during the process, in order to identify the ongoing dynamics. Based on the analysis, we establish how the interplay evolves in a complex structure, where the design and research interests continuously couple, interweave, and decouple...

Dynamics of Research through Design

DEFF Research Database (Denmark)

Basballe, Ditte Amund; Halskov, Kim

2012-01-01

a one-year period. We analyse material collected from 18 key events during the process, in order to identify the ongoing dynamics. Based on the analysis, we establish how the interplay evolves in a complex structure, where the design and research interests continuously couple, interweave, and decouple......In this paper, we investigate Research through Design at a micro-level, by addressing the dynamic interplay of research and design as they unfold throughout a design process. As our principal case, we consider the design of a three-dimensional projection installation, a process that unfolded over...

National inventory of radioactive wastes and valorizable materials. Synthesis report

International Nuclear Information System (INIS)

2004-01-01

This national inventory of radioactive wastes is a reference document for professionals and scientists of the nuclear domain and also for any citizen interested in the management of radioactive wastes. It contains: 1 - general introduction; 2 - the radioactive wastes: definition, classification, origin and management; 3 - methodology of the inventory: organization, accounting, prospective, production forecasting, recording of valorizable materials, exhaustiveness, verification tools; 4 - general results: radioactive waste stocks recorded until December 31, 2002, forecasts for the 2003-2020 era, post-2020 prospects: dismantling operations, recording of valorizable materials; 5 - inventory per producer or owner: front-end fuel cycle facilities, power generation nuclear centers, back-end fuel cycle facilities, waste processing or maintenance facilities, civil CEA research centers, non-CEA research centers, medical activities (diagnostics, therapeutics, analyses), various industrial activities (sources fabrication, control, particular devices), military research and experiment centers, storage and disposal facilities; 6 - elements about radioactive polluted sites; 7 - examples of foreign inventories; 8 - conclusion and appendixes. (J.S.)

Analisis dan Perancangan Aplikasi Inventori Berbasiskan Rfid Pada PT. ABC

Directory of Open Access Journals (Sweden)

Herwin Herwin

2010-12-01

Full Text Available The purpose of this research is to reduce the damaged material, applying the concept of FIFO for retrieval of row materials, and accelerate the search and also to simplify the detection of raw materials. Software development method used involves three main parts namely the method of analysis, design and literature. Analysis methods including survey of the running system, an analysis of survey findings, identify information needs, identify system requirenments. The design method approach to Unified Modelling Language (UML. The results is an inventory application that uses Radio Frequency Identification (RFID tags as a replacement label where RFID tags can store data. Conslusions from this research is minimizing the company’s financial losses due to storage of raw materials and minimizing time to search raw materials using RFID that also can provide actual and accurate information for the company. 

Rapid inventory taking system

International Nuclear Information System (INIS)

Marsden, P.S.S.F.

1980-01-01

A data processing system designed to facilitate inventory taking is described. The process depends upon the earliest possible application of computer techniques and the elimination of manual operations. Data is recorded in optical character recognition (OCR) 'A' form and read by a hand held wand reader. Limited validation checks are applied before recording on mini-tape cassettes. 5 refs

Study of column construction and tritium inventory of cryogenic distillation columns for tritium plant of a fusion reactor

International Nuclear Information System (INIS)

Iwai, Yasunori; Yamanishi, Toshihiko; Okuno, Kenji

1996-11-01

Cryogenic distillation column system is believed to be best for large throughput of hydrogen isotope separation. The major disadvantage of the system is a large tritium inventory in liquid phase. From a viewpoint of safety of a fusion reactor, it is important to establish the design method of minimized the tritium inventory. Anumerical study to investigate the possible design improvement to reduce inventory while maintaining separation performance was conducted. The design conditions are based on ITER DDD report, and details are as follows, 1) Exhaust stream with less than 50 Ci/y loss of tritium, 2) 99.9% purity D2, and 3) 90% purity T2. 4) total inventory with less than 100g. In the design of ITER to process 32 mol/hr, 4 columns (3 of 4 columns make closed loop) are best and total inventory is 94g. Particularly recent design of ITER to process 320 mol/hr requires additional efforts to minimize the inventory. The simulation also suggests it is effective to reduce inventory to draw two different purity product streams. (author)

Development of the HD-Teen Inventory.

Science.gov (United States)

Driessnack, Martha; Williams, Janet K; Barnette, J Jackson; Sparbel, Kathleen J; Paulsen, Jane S

2012-05-01

Adolescents, who have a parent with Huntington Disease (HD), not only are at genetic risk for HD but also are witness to its onset and devastating clinical progression as their parent declines. To date, no mechanism has been developed to direct health care providers to the atypical adolescent experiences of these teens. The purpose of this report is to describe the process of developing the HD-Teen Inventory clinical assessment tool. Forty-eight teens and young adults from 19 U.S. states participated in the evaluation of the HD-Teen Inventory tool. Following item analysis, the number of items was reduced and item frequency and reaction scales were combined, based on the strong correlation (r = .94). The resultant tool contains 15 inventory and 2 open-ended response items. The HD-Teen Inventory emerged as a more compact and efficient tool for identifying the most salient concerns of at-risk teens in HD families in research and/or clinical practice.

Establishing the Validity of the Personality Assessment Inventory Drug and Alcohol Scales in a Corrections Sample

Science.gov (United States)

Patry, Marc W.; Magaletta, Philip R.; Diamond, Pamela M.; Weinman, Beth A.

2011-01-01

Although not originally designed for implementation in correctional settings, researchers and clinicians have begun to use the Personality Assessment Inventory (PAI) to assess offenders. A relatively small number of studies have made attempts to validate the alcohol and drug abuse scales of the PAI, and only a very few studies have validated those…

Distribution method optimization : inventory flexibility

NARCIS (Netherlands)

Asipko, D.

2010-01-01

This report presents the outcome of the Logistics Design Project carried out for Nike Inc. This project has two goals: create a model to measure a flexibility aspect of the inventory usage in different Nike distribution channels, and analyze opportunities of changing the decision model of splitting

Fashion Research at Design Schools

DEFF Research Database (Denmark)

Skjold, Else

2008-01-01

as a continuation of the way teaching in fashion design and research on fashion is perceived in the various cases. This of course implements the fact that there are very diverse perceptions on what fashion research is.  A main discussion therefore concerns current methodological diversities in fashion research......The report “Fashion Research at Design Schools” (2008), which was commissioned by Institute for Fashion and Textiles at Designskolen Kolding,  appoints the potentials and challenges in relation to the ongoing academization of design schools, with a specific focus on fashion research. The key...... research question is: “What kind of fashion design education is Designskolen Kolding aiming to offer in the future, what kind of skills will the students need in their future work place, the fashion industry, and can research work as a potential in this process?”   The study is based on qualitative...

Designing and Testing an Inventory for Measuring Social Media Competency of Certified Health Education Specialists.

Science.gov (United States)

Alber, Julia M; Bernhardt, Jay M; Stellefson, Michael; Weiler, Robert M; Anderson-Lewis, Charkarra; Miller, M David; MacInnes, Jann

2015-09-23

Social media can promote healthy behaviors by facilitating engagement and collaboration among health professionals and the public. Thus, social media is quickly becoming a vital tool for health promotion. While guidelines and trainings exist for public health professionals, there are currently no standardized measures to assess individual social media competency among Certified Health Education Specialists (CHES) and Master Certified Health Education Specialists (MCHES). The aim of this study was to design, develop, and test the Social Media Competency Inventory (SMCI) for CHES and MCHES. The SMCI was designed in three sequential phases: (1) Conceptualization and Domain Specifications, (2) Item Development, and (3) Inventory Testing and Finalization. Phase 1 consisted of a literature review, concept operationalization, and expert reviews. Phase 2 involved an expert panel (n=4) review, think-aloud sessions with a small representative sample of CHES/MCHES (n=10), a pilot test (n=36), and classical test theory analyses to develop the initial version of the SMCI. Phase 3 included a field test of the SMCI with a random sample of CHES and MCHES (n=353), factor and Rasch analyses, and development of SMCI administration and interpretation guidelines. Six constructs adapted from the unified theory of acceptance and use of technology and the integrated behavioral model were identified for assessing social media competency: (1) Social Media Self-Efficacy, (2) Social Media Experience, (3) Effort Expectancy, (4) Performance Expectancy, (5) Facilitating Conditions, and (6) Social Influence. The initial item pool included 148 items. After the pilot test, 16 items were removed or revised because of low item discrimination (r.90), or based on feedback received from pilot participants. During the psychometric analysis of the field test data, 52 items were removed due to low discrimination, evidence of content redundancy, low R-squared value, or poor item infit or outfit

Development of a Solar System Concept Inventory

Science.gov (United States)

Hornstein, Seth D.; Duncan, D.; S, C. A. T.

2009-01-01

Concept inventories can provide useful insight into students’ understanding of key physical concepts. Knowing what your students have learned during a course is a valuable tool for improving your own teaching. Unfortunately, current astronomy concept inventories are not suitable for an introductory solar system course because they either cover too broad of a range of topics (e.g. Astronomy Diagnostic Test) or are too narrowly focused (e.g. Greenhouse Effect Concept Inventory, Lunar Phase Concept Inventory). We have developed the Solar System Concept Inventory (SSCI) to cover those topics commonly taught in an introductory solar system course. The topics included on the SSCI were selected by having faculty identify the key concepts they address when teaching about the solar system. SSCI topics include formation mechanisms, planetary interiors, atmospheric effects, and small solar system bodies. Student interviews were conducted to identify common naive ideas and reasoning difficulties relating to these key topics. Preliminary development of the SSCI was completed at the University of Colorado and involved over 400 students. A larger, national, multi-institutional field test is planned for Spring 2009 as a Collaboration of Astronomy Teaching Scholars (CATS) research project. We present here the results from the preliminary development and proposed changes for the next stage of research. We would like to thank the NSF for funding under Grant No. 0715517, a CCLI Phase III Grant for the Collaboration of Astronomy Teaching Scholars (CATS) Program.

Optoelectronic inventory system for special nuclear material

International Nuclear Information System (INIS)

Sieradzki, F.H.

1994-01-01

In support of the Department of Energy's Dismantlement Program, the Optoelectronics Characterization and Sensor Development Department 2231 at Sandia National Laboratories/New Mexico has developed an in situ nonintrusive Optoelectronic Inventory System (OIS) that has the potential for application wherever periodic inventory of selected material is desired. Using a network of fiber-optic links, the OIS retrieves and stores inventory signatures from data storage devices (which are permanently attached to material storage containers) while inherently providing electromagnetic pulse immunity and electrical noise isolation. Photovoltaic cells (located within the storage facility) convert laser diode optic power from a laser driver to electrical energy. When powered and triggered, the data storage devices sequentially output their digital inventory signatures through light-emitting diode/photo diode data links for retrieval and storage in a mobile data acquisition system. An item's exact location is determined through fiber-optic network and software design. The OIS provides an on-demand method for obtaining acceptable inventory reports while eliminating the need for human presence inside the material storage facility. By using modularization and prefabricated construction with mature technologies and components, an OIS installation with virtually unlimited capacity can be tailored to the customer's requirements

Determining an optimum inventory route for an areal object: the case of forest inventory in Finland

Directory of Open Access Journals (Sweden)

Henna Etula

2014-03-01

Full Text Available In recent decades, routing based on Geographic Information Systems (GIS has become a major branch of technology, which has been used especially in applications related to transport and logistics. However, in terms of the development of methods, routing in a cross-country environment is more difficult, and hence research into it has been relatively scarce. This is particularly true in the context of complex routing problems involving visits to several locations. A typical example of a problem of this kind is field inventory, which is a data collection procedure used in many application areas, particularly those related to environmental research and the management of natural resources. This study presents a problem in which an efficient inventory route is determined for an areal object, such that the area visible from the route meets a prescribed threshold, while maintaining the shortest possible route. Although this problem, referred to here as the Areal Inventory Problem (AIP, is closely related to a multitude of routing and location allocation methods known in the context of GIS, none of them is very well-suited for solving the AIP. This study describes a general solution procedure for the AIP, and introduces an implementation of a heuristic algorithm that can be used to solve a real-world AIP within a reasonable time frame. The proposed approach is demonstrated with actual data related to field inventory practices carried out by the Finnish Forest Centre.

Travel reliability inventory for Chicago.

Science.gov (United States)

2013-04-01

The overarching goal of this research project is to enable state DOTs to document and monitor the reliability performance : of their highway networks. To this end, a computer tool, TRIC, was developed to produce travel reliability inventories from : ...

Inventory parameters

CERN Document Server

Sharma, Sanjay

2017-01-01

This book provides a detailed overview of various parameters/factors involved in inventory analysis. It especially focuses on the assessment and modeling of basic inventory parameters, namely demand, procurement cost, cycle time, ordering cost, inventory carrying cost, inventory stock, stock out level, and stock out cost. In the context of economic lot size, it provides equations related to the optimum values. It also discusses why the optimum lot size and optimum total relevant cost are considered to be key decision variables, and uses numerous examples to explain each of these inventory parameters separately. Lastly, it provides detailed information on parameter estimation for different sectors/products. Written in a simple and lucid style, it offers a valuable resource for a broad readership, especially Master of Business Administration (MBA) students.

Evaluation of the Role of Inventory Management in Logistics Chain of an Organisation

Directory of Open Access Journals (Sweden)

Oluwaseyi Joseph Afolabi

2017-11-01

Full Text Available The operation of inventory management determines the efficiency of storage of products. The progress in techniques and management principles improves the moving load, delivery speed, service quality, operation costs, the usage of facilities and energy saving. Inventory management takes a crucial part in the manipulation of logistics. Reviewing the current condition, a strong system needs a clear frame of logistics and a proper inventory implements and techniques to link the producing procedures. The objective of the paper is to define the role of inventory management in logistics for the reference of further improvement. The research was undertaken to assist logistics managers, researchers and inventory planners to define and comprehend the basic views of logistics and its various applications and the relationships between logistics and inventory.

A Multinomial Logit Approach to Estimating Regional Inventories by Product Class

Science.gov (United States)

Lawrence Teeter; Xiaoping Zhou

1998-01-01

Current timber inventory projections generally lack information on inventory by product classes. Most models available for inventory projection and linked to supply analyses are limited to projecting aggregate softwood and hardwood. The objective of this research is to develop a methodology to distribute the volume on each FIA survey plot to product classes and...

Plan and procedures for rapid inventory taking at the Research Institute for Atomic Reactors

International Nuclear Information System (INIS)

Kalygin, V.; Gorobets, A.; Karlov, S.

1997-01-01

A major element of a system for nuclear material protection, control, and accounting (MPC and A) is to take the physical inventory of the nuclear material periodically. Physical inventory taking (PIT) includes ensuring that all nuclear material on inventory is included in the facility records and that the measured content of items or containers (or at least a suitable random sample thereof) corresponds to the recorded values. This paper summarizes the existing MC and A system at the RIAR Central Storage Facility, presents a means for achieving enhanced safeguards in nuclear material accounting, and discusses the process of introducing the technology and methodology into the plant operations at RIAR in Dimitrovgrad

Development of the Supported Decision Making Inventory System.

Science.gov (United States)

Shogren, Karrie A; Wehmeyer, Michael L; Uyanik, Hatice; Heidrich, Megan

2017-12-01

Supported decision making has received increased attention as an alternative to guardianship and a means to enable people with intellectual and developmental disabilities to exercise their right to legal capacity. Assessments are needed that can used by people with disabilities and their systems of supports to identify and plan for needed supports to enable decision making. This article describes the steps taken to develop such an assessment tool, the Supported Decision Making Inventory System (SDMIS), and initial feedback received from self-advocates with intellectual disability. The three sections of the SDMIS (Supported Decision Making Personal Factors Inventory, Supported Decision Making Environmental Demands Inventory, and Decision Making Autonomy Inventory) are described and implications for future research, policy, and practice are discussed.

Research design models: a new category

International Nuclear Information System (INIS)

Burgeson, D.A.

1983-01-01

This paper discusses the concept of a research design model and how it differs from an engineering design model. Essentially, the research design model draws on the methods, materials and processes of engineering design models but more emphasis is placed on conceptualization in 3-D. Typically, equipment and processes in research are unique. Often, there are competing concepts from which to decide. The approach which is evolving at Sandia National Laboratories mixes preliminary, engineering and research design on the same model

Optimizing inventory management in the insulation manufacturing industry

DEFF Research Database (Denmark)

Herbert-Hansen, Zaza Nadja Lee; Larsen, Samuel

2016-01-01

Inventory issues within the insulation manufacturing industry are essential for competitiveness. However, they are largely unexplored in academic literature. Therefore the aim of this paper is to address the research question: “What approach to inventory management provides the best balance between...... service level and cost for the insulation manufacturing industry?” This is done through an in-depth case study of a world-leading company within this industry, with focus on two of its factories. This paper contributes with empirical research within operations management in a sector which has not been...

Experiential design landscapes: design research in the wild

NARCIS (Netherlands)

Peeters, M.M.R.; Megens, C.J.P.G.; IJsselsteijn, W.A.; Hummels, C.C.M.; Brombacher, A.C.; Brandt, E.; Ehn, P.; Johansson, T.; Johansson, T.D.; Hellström Reimer, M.; Markussen, T.; Vallgårda, A.

2013-01-01

Thanks to the emergence of new sensing and behaviour tracking technologies, design research can take place anywhere and anytime in the real world. When doing design research, a trade-off has to be made between experimental control and ecological validity. In this paper, we compare Experiential

Automated Interactive Storeroom Inventory System.

Science.gov (United States)

Sapp, Albert L.; Hess, Larry G.

1989-01-01

The inventory system designed for six storerooms in three buildings at the University of Illinois at Urbana-Champaign's School of Chemical Sciences replaced an issue-slip and transactions record system with barcode technology. Data collection error reductions have been significant, making it easier to determine stock levels and plan purchases.…

ITER Task T332a (1995): Low-inventory cryogenic distillation tests

International Nuclear Information System (INIS)

Woodall, K.; Robins, J.; Bellamy, D.

1996-01-01

Previous work at Ontario Hydro Technologies (OHT) had shown that small hydrogen cryogenic columns could be stably controlled and designed to much lower inventories than had been previously thought possible. Among the results were measurements of height equivalent to a theoretical plate (HETP) versus holdup for Helipak A and B packings in columns up to 20 mm diameter. ITER cryogenic distillation column designs suggest that the final high-tritium column could be 30-70 mm diameter. The objective of this ITER task was to test scale-up of OHT low inventory columns to ITER dimensions. In 1994 OHT built a suitable test facility. In 1995, two low-inventory packings were tested. (author) 4 refs., 6 figs

Game Design as STS Research

Directory of Open Access Journals (Sweden)

Joseph Dumit

2017-09-01

Full Text Available Game design offers a powerful pedagogical paradigm for engaging students in thinking and researching sociotechnical systems. Using the example of designing a game around fracking, this paper describes how game design grapples with emergent dynamic processes, and how students are drawn into becoming STS researchers.

Deploying an NFC-based inventory system: a case study

OpenAIRE

Poullie, Patrick; Bocek, Thomas; Stiller, Burkhard

2015-01-01

NFC tags and transceivers are ubiquitous and well supported. Like many academic research groups, the Communication Systems Group CSG of the University of Zürich owns many physical devices, which are required for research and teaching. Traditionally, a printed, human-readable inventory and attached labels have been used to keep track of these devices. A new inventory approach was developed with the aim of simplifying the data acquisition using an NFC tag-based system supported by an Android ap...

Challenges in Nordic Design Research

DEFF Research Database (Denmark)

Andreasen, Mogens Myrup

1996-01-01

Design research has not won a convincing reputation in industry. Nordic research being scattered and small in number of researchers should find its special strengths and focus on creating results, which are based on our peculiar conditions and background.......Design research has not won a convincing reputation in industry. Nordic research being scattered and small in number of researchers should find its special strengths and focus on creating results, which are based on our peculiar conditions and background....

Research by Design, Demarcation and Recoginition

NARCIS (Netherlands)

Doevendans, C.H.; Sap, H.A.; Langenhuizen, Anja; Ouwerkerk, Marieke van; Rosemann, Jurgen

2001-01-01

There is a strong tendency to see designing as a form of research; research by design. On the other hand it is stated that the urban design discipline has ceased to exist or does not develop anymore. Is this correct and can 'research by design' change this situation? These are the questions of

Bounding Radionuclide Inventory and Accident Consequence Calculation for the 1L Target

International Nuclear Information System (INIS)

Kelsey, Charles T. IV

2011-01-01

A bounding radionuclide inventory for the tungsten of the Los Alamos Neutron Science Center (LANSCE) IL Target is calculated. Based on the bounding inventory, the dose resulting from the maximum credible incident (MCI) is calculated for the maximally exposed offsite individual (MEOl). The design basis accident involves tungsten target oxidation following a loss of cooling accident. Also calculated for the bounding radionuclide inventory is the ratio to the LANSCE inventory threshold for purposes of inventory control as described in the target inventory control policy. A bounding radionuclide inventory calculation for the lL Target was completed using the MCNPX and CINDER'90 codes. Continuous beam delivery at 200 (micro)A to 2500 mA·h was assumed. The total calculated activity following this irradiation period is 205,000 Ci. The dose to the MEOI from the MCI is 213 mrem for the bounding inventory. The LANSCE inventory control threshold ratio is 132.

Variation in choice of study design: findings from the Epidemiology Design Decision Inventory and Evaluation (EDDIE) survey.

Science.gov (United States)

Stang, Paul E; Ryan, Patrick B; Overhage, J Marc; Schuemie, Martijn J; Hartzema, Abraham G; Welebob, Emily

2013-10-01

Researchers using observational data to understand drug effects must make a number of analytic design choices that suit the characteristics of the data and the subject of the study. Review of the published literature suggests that there is a lack of consistency even when addressing the same research question in the same database. To characterize the degree of similarity or difference in the method and analysis choices made by observational database research experts when presented with research study scenarios. On-line survey using research scenarios on drug-effect studies to capture method selection and analysis choices that follow a dependency branching based on response to key questions. Voluntary participants experienced in epidemiological study design solicited for participation through registration on the Observational Medical Outcomes Partnership website, membership in particular professional organizations, or links in relevant newsletters. Description (proportion) of respondents selecting particular methods and making specific analysis choices based on individual drug-outcome scenario pairs. The number of questions/decisions differed based on stem questions of study design, time-at-risk, outcome definition, and comparator. There is little consistency across scenarios, by drug or by outcome of interest, in the decisions made for design and analyses in scenarios using large healthcare databases. The most consistent choice was the cohort study design but variability in the other critical decisions was common. There is great variation among epidemiologists in the design and analytical choices that they make when implementing analyses in observational healthcare databases. These findings confirm that it will be important to generate empiric evidence to inform these decisions and to promote a better understanding of the impact of standardization on research implementation.

Forest inventory in Myanmar

Energy Technology Data Exchange (ETDEWEB)

Bo, Sit [Forest Resource Div., Forest Department (Myanmar)

1993-10-01

Forest inventory in Myanmar started in 1850s. Up till 1975, Myanmar Forest Department conducted forest inventories covering approximately one forest division every year. The National Forest Survey and Inventory Project funded by UNDP and assisted by FAO commenced in 1981 and the National Forest Management and Inventory project followed in 1986. Up till end March 1993, pre-investment inventory has covered 26.7 million acres, reconnaissance inventory 5.4 million acres and management inventory has carried out in 12 townships

Forest inventory in Myanmar

International Nuclear Information System (INIS)

Sit Bo

1993-01-01

Forest inventory in Myanmar started in 1850s. Up till 1975, Myanmar Forest Department conducted forest inventories covering approximately one forest division every year. The National Forest Survey and Inventory Project funded by UNDP and assisted by FAO commenced in 1981 and the National Forest Management and Inventory project followed in 1986. Up till end March 1993, pre-investment inventory has covered 26.7 million acres, reconnaissance inventory 5.4 million acres and management inventory has carried out in 12 townships

OTUS - Reactor inventory management system based on ORIGEN2

Energy Technology Data Exchange (ETDEWEB)

Poellaenen, R; Toivonen, H; Lahtinen, J; Ilander, T

1995-10-01

ORIGEN2 is a computer code that calculates nuclide composition and other characteristics of nuclear fuel. The use of ORIGEN2 requires good knowledge in reactor physics. However, once the input has been defined for a particular reactor type, the calculations can be easily repeated for any burnup and decay time. This procedure produces large output files that are difficult to handle manually. A new computer code, known as OTUS, was designed to facilitate the postprocessing of the data. OTUS makes use of the inventory files precalculated with ORIGEN2 in a way that enables their versatile treatment for different safety analysis purposes. A data base is created containing a comprehensive set of ORIGEN2 calculations as a function of fuel burnup and decay time. OTUS is a reactor inventory management system for a microcomputer with Windows interface. Four major data operations are available: (1) Build data modifies ORIGEN2 output data into a suitable format, (2) View data enables flexible presentation of the data as such, (3) Different calculations, such as nuclide ratios and hot particle characteristics, can be performed for severe accident analyses, consequence analyses and research purposes, (4) Summary files contain both burnup dependent and decay time dependent inventory information related to the nuclide and the reactor specified. These files can be used for safeguards, radiation monitoring and safety assessment. (orig.) (22 refs., 29 figs.).

Inventory of Federal energy-related environment and safety research for FY 1977. Volume IV. Indices

Energy Technology Data Exchange (ETDEWEB)

1978-07-01

This volume contains indexes useful for accessing projects contained in the FY 1977 Federal Inventory. The indexing has been greatly broadened this year to provide hard copy users with greater flexibility in locating projects. The Inventory projects are printed sequentially by log number. An inventory log number is a unique number assigned to each project from a block of numbers set aside for each agency. The association of agencies with blocks of log numbers is found in the table of contents of the Index (Volume III).

An open repository of earthquake-triggered ground-failure inventories

Science.gov (United States)

Schmitt, Robert G.; Tanyas, Hakan; Nowicki Jessee, M. Anna; Zhu, Jing; Biegel, Katherine M.; Allstadt, Kate E.; Jibson, Randall W.; Thompson, Eric M.; van Westen, Cees J.; Sato, Hiroshi P.; Wald, David J.; Godt, Jonathan W.; Gorum, Tolga; Xu, Chong; Rathje, Ellen M.; Knudsen, Keith L.

2017-12-20

Earthquake-triggered ground failure, such as landsliding and liquefaction, can contribute significantly to losses, but our current ability to accurately include them in earthquake-hazard analyses is limited. The development of robust and widely applicable models requires access to numerous inventories of ground failures triggered by earthquakes that span a broad range of terrains, shaking characteristics, and climates. We present an openly accessible, centralized earthquake-triggered groundfailure inventory repository in the form of a ScienceBase Community to provide open access to these data with the goal of accelerating research progress. The ScienceBase Community hosts digital inventories created by both U.S. Geological Survey (USGS) and non-USGS authors. We present the original digital inventory files (when available) as well as an integrated database with uniform attributes. We also summarize the mapping methodology and level of completeness as reported by the original author(s) for each inventory. This document describes the steps taken to collect, process, and compile the inventories and the process for adding additional ground-failure inventories to the ScienceBase Community in the future.

Design Science Research

DEFF Research Database (Denmark)

Pries-Heje, Jan; Venable, John; Baskerville, Richard L.

2017-01-01

This workshop is an applied tutorial, aimed at novice and experienced researchers who wish to learn more about Design Science Research (DSR) and/or to develop and progress their own DSR work. During the workshop, attendees will be introduced to various DSR concepts and current trends, to create...

Gifts to the Future: Design Reasoning, Design Research, and Critical Design Practitioners

Directory of Open Access Journals (Sweden)

Janet McDonnell

Full Text Available Set in the context of a particular orthodoxy about the history of design research over the last 50 years, this opinion piece selectively surveys some of the significant findings from research into what expert design reasoning entails. Using the conceit of a pool of knowledge—which has come about from many different design research agendas, using multiple methods, and with differing foci of attention—it indicates some of what we know about design reasoning as a phenomenon by taking three “scoops” from the pool. These scoops, respectively characterize design reasoning as navigating the swamp; having negative capability; and being concerned with framing. This material is then used to contrast expert design reasoning with salient features of some popular characterizations of design thinking. The contribution concludes with some comments on designer formation, centered on the necessity of proficiency in reflection implied by any goal to nurture critical design practitioners.

Design Research and the Solo Higher Degree Research Student: Strategies to Embed Trustworthiness and Validity into the Research Design

Science.gov (United States)

Kennedy-Clark, Shannon

2012-01-01

This paper puts forward a set of criteria for ensuring trustworthiness in design research studies undertaken by Higher Degree Research (HDR) students. Design research is aimed at exploring educational problems and refining theory and practice by defining a pedagogical outcome and is a methodological approach often associated with the Learning…

The Design Social: Framing social research methods for design postgraduates.

OpenAIRE

Evans, Martyn

2010-01-01

This paper discusses approaches for framing social research methods within postgraduate design curricula, details the responses of postgraduate design students to the possibilities presented by social research methods, and concludes with a case study of the adoption experiences of PhD students in design when engaging with social research methods. Analysis of semi-structured interviews is employed to draw out perceptions and experiences of design postgraduates when engaging with social researc...

ITER task T332a (1996) low-inventory cryogenic distillation tests

International Nuclear Information System (INIS)

Woodall, K.; Bellamy, D.

1997-02-01

The overall objective of this ITER task was to perform tests which would improve the accuracy of the ITER Isotope Separation System (ISS) tritium inventory estimates and to allow designers to lower the tritium and hydrogen inventory estimates. The work program was also designed to give a better understanding of cryogenic distillation hydraulics and provide information which would improve process control. The work program this year addressed the following specific task objectives. Measure the detailed hydraulics for deuterium/deuterium hydride mixtures in a cryogenic distillation column using Helipak C packing. Determine maximum vapour velocity, HETP and tritium and deuterium inventory data for a column that can be operated right up to flooding conditions. Determine if a proprietary surface treatment improves the wetting characteristics for hydrogen on stainless steel packing. Measure the isotope separation and inventory performance of a Helipak C column large enough to handle up to 45 mm. Investigate additional hydraulic effects in the reboiler and column. 7 refs., 7 figs

Interactive Inventory Monitoring

Science.gov (United States)

Garud, Sumedha

2013-01-01

Method and system for monitoring present location and/or present status of a target inventory item, where the inventory items are located on one or more inventory shelves or other inventory receptacles that communicate with an inventory base station through use of responders such as RFIDs. A user operates a hand held interrogation and display (lAD) module that communicates with, or is part of the base station to provide an initial inquiry. lnformation on location(s) of the larget invenlory item is also indicated visibly and/or audibly on the receptacle(s) for the user. Status information includes an assessment of operation readiness and a time, if known, that the specified inventory item or class was last removed or examined or modified. Presentation of a user access level may be required for access to the target inventgory item. Another embodiment provides inventory informatin for a stack as a sight-impaired or hearing-impaired person adjacent to that stack.

Optimal Acquisition and Inventory Control for a Remanufacturing System

Directory of Open Access Journals (Sweden)

Zhigang Jiang

2013-01-01

Full Text Available Optimal acquisition and inventory control can often make the difference between successful and unsuccessful remanufacturing. However, there is a greater degree of uncertainty and complexity in a remanufacturing system, which leads to a critical need for planning and control models designed to deal with this added uncertainty and complexity. In this paper, a method for optimal acquisition and inventory control of a remanufacturing system is presented. The method considers three inventories, one for returned item and the other for serviceable and recoverable items. Taking the holding cost for returns, recoverable and remanufactured products, remanufacturing cost, disposal cost, and the loss caused by backlog into account, the optimal inventory control model is established to minimize the total costs. Finally, a numerical example is provided to illustrate the proposed methods.

Improvement for Amelioration Inventory Model with Weibull Distribution

Directory of Open Access Journals (Sweden)

Han-Wen Tuan

2017-01-01

Full Text Available Most inventory models dealt with deteriorated items. On the contrary, just a few papers considered inventory systems under amelioration environment. We study an amelioration inventory model with Weibull distribution. However, there are some questionable results in the amelioration paper. We will first point out those questionable results in the previous paper that did not derive the optimal solution and then provide some improvements. We will provide a rigorous analytical work for different cases dependent on the size of the shape parameter. We present a detailed numerical example for different ranges of the sharp parameter to illustrate that our solution method attains the optimal solution. We developed a new amelioration model and then provided a detailed analyzed procedure to find the optimal solution. Our findings will help researchers develop their new inventory models.

Design of a multipurpose research reactor

International Nuclear Information System (INIS)

Sanchez Rios, A.A.

1990-01-01

The availability of a research reactor is essential in any endeavor to improve the execution of a nuclear programme, since it is a very versatile tool which can make a decisive contribution to a country's scientific and technological development. Because of their design, however, many existing research reactors are poorly adapted to certain uses. In some nuclear research centres, especially in the advanced countries, changes have been made in the original designs or new research prototypes have been designed for specific purposes. These modifications have proven very costly and therefore beyond the reach of developing countries. For this reason, what the research institutes in such countries need is a single sufficiently versatile nuclear plant capable of meeting the requirements of a nuclear research programme at a reasonable cost. This is precisely what a multipurpose reactor does. The Mexican National Nuclear Research Institute (ININ) plans to design and build a multipurpose research reactor capable at the same time of being used for the development of reactor design skills and for testing nuclear materials and fuels, for radioisotopes production, for nuclear power studies and basic scientific research, for specialized training, and so on. For this design work on the ININ Multipurpose Research Reactor, collaborative relations have been established with various international organizations possessing experience in nuclear reactor design: Atomehnergoeksport of the USSR: Atomic Energy of Canada Limited (AECL); General Atomics (GA) of the USA; and Japan Atomic Energy Research Institute

An inventory of biomedical imaging physics elements-of-competence for diagnostic radiography education in Europe

Energy Technology Data Exchange (ETDEWEB)

Caruana, Carmel J. [University of Malta, Institute of Health Care, St Lukes Hospital, Gwardamangia (Malta)]. E-mail: carmel.j.caruana@um.edu.mt; Plasek, Jaromir [Charles University, Faculty of Mathematics and Physics, Institute of Physics, Division of Biophysics, Prague (Czech Republic)

2006-08-15

Purpose: To develop an inventory of biomedical physics elements-of-competence for diagnostic radiography education in Europe. Method: Research articles in the English literature and UK documentation pertinent to radiography education, competences and role development were subjected to a rigorous analysis of content from a functional and competence analysis perspective. Translations of radiography curricula from across Europe and relevant EU legislation were likewise analysed to ensure a pan-European perspective. Broad Subject Specific Competences for diagnostic radiography that included major biomedical physics components were singled out. These competences were in turn carefully deconstructed into specific elements-of-competence and those elements falling within the biomedical physics learning domain inventorised. A pilot version of the inventory was evaluated by participants during a meeting of the Higher Education Network for Radiography in Europe (HENRE), held in Marsascala, Malta, in November 2004. The inventory was further refined taking into consideration suggestions by HENRE members and scientific, professional and educational developments. Findings: The evaluation of the pilot inventory was very positive and indicated that the overall structure of the inventory was sensible, easily understood and acceptable - hence a good foundation for further development. Conclusions: Use of the inventory by radiography programme leaders and biomedical physics educators would guarantee that all necessary physics elements-of-competence underpinning the safe, effective and economical use of imaging devices are included within radiography curricula. It will also ensure the relevancy of physics content within radiography education. The inventory is designed to be a pragmatic tool for curriculum development across the entire range of radiography education up to doctorate level and irrespective of whether curriculum delivery is discipline-based or integrated, presentation

An inventory of biomedical imaging physics elements-of-competence for diagnostic radiography education in Europe

International Nuclear Information System (INIS)

Caruana, Carmel J.; Plasek, Jaromir

2006-01-01

Purpose: To develop an inventory of biomedical physics elements-of-competence for diagnostic radiography education in Europe. Method: Research articles in the English literature and UK documentation pertinent to radiography education, competences and role development were subjected to a rigorous analysis of content from a functional and competence analysis perspective. Translations of radiography curricula from across Europe and relevant EU legislation were likewise analysed to ensure a pan-European perspective. Broad Subject Specific Competences for diagnostic radiography that included major biomedical physics components were singled out. These competences were in turn carefully deconstructed into specific elements-of-competence and those elements falling within the biomedical physics learning domain inventorised. A pilot version of the inventory was evaluated by participants during a meeting of the Higher Education Network for Radiography in Europe (HENRE), held in Marsascala, Malta, in November 2004. The inventory was further refined taking into consideration suggestions by HENRE members and scientific, professional and educational developments. Findings: The evaluation of the pilot inventory was very positive and indicated that the overall structure of the inventory was sensible, easily understood and acceptable - hence a good foundation for further development. Conclusions: Use of the inventory by radiography programme leaders and biomedical physics educators would guarantee that all necessary physics elements-of-competence underpinning the safe, effective and economical use of imaging devices are included within radiography curricula. It will also ensure the relevancy of physics content within radiography education. The inventory is designed to be a pragmatic tool for curriculum development across the entire range of radiography education up to doctorate level and irrespective of whether curriculum delivery is discipline-based or integrated, presentation

Research design and statistical analysis

CERN Document Server

Myers, Jerome L; Lorch Jr, Robert F

2013-01-01

Research Design and Statistical Analysis provides comprehensive coverage of the design principles and statistical concepts necessary to make sense of real data.  The book's goal is to provide a strong conceptual foundation to enable readers to generalize concepts to new research situations.  Emphasis is placed on the underlying logic and assumptions of the analysis and what it tells the researcher, the limitations of the analysis, and the consequences of violating assumptions.  Sampling, design efficiency, and statistical models are emphasized throughout. As per APA recommendations

Gender Fairness within the Force Concept Inventory

Science.gov (United States)

Traxler, Adrienne; Henderson, Rachel; Stewart, John; Stewart, Gay; Papak, Alexis; Lindell, Rebecca

2018-01-01

Research on the test structure of the Force Concept Inventory (FCI) has largely ignored gender, and research on FCI gender effects (often reported as "gender gaps") has seldom interrogated the structure of the test. These rarely crossed streams of research leave open the possibility that the FCI may not be structurally valid across…

Radionuclide inventory and source terms for the surplus production reactors at Hanford

International Nuclear Information System (INIS)

Miller, R.L.; Steffes, J.M.

1987-01-01

Radionuclide inventories have been estimated for the eight surplus production reactors at Hanford. The inventories listed represent more than 95% of the total curie burden; the remaining 5% is distributed in piping, tunnels, and various other locations within the reactor building and unaccounted for inventories within the reactors or fuel storage basins. Estimates are conservative as the methodology was designed to overestimate the radionuclide inventories in the facilities. The estimated inventory per reactor facility ranges from 13,000 curies to 58,000 curies. The majority of the present inventory consists of tritium, carbon-14, cobalt-60, and nickel-63. The information in this document combines data from past characterization efforts and introduces adjustments for added information and refinement. The inventory of hazardous materials in the reactor facilities is also addressed. This document has been revised to include new reduced inventory figures for chlorine-36. The new figures were derived from recent analysis of irradiated graphite from the 105-kW reactor

A new approach for peat inventory methods; Turvetutkimusten menetelmaekehitystarkastelu

Energy Technology Data Exchange (ETDEWEB)

Laatikainen, M.; Leino, J.; Lerssi, J.; Torppa, J.; Turunen, J. Email: jukka.turunen@gtk.fi

2011-07-01

inventory method (2) Ground penetrating radar in peat research, (3) Air physics in peat research and (4) Modelling of peat depth. (orig.)

Fashion Research at Design Schools

DEFF Research Database (Denmark)

Skjold, Else

2008-01-01

The report “Fashion Research at Design Schools” (2008), which was commissioned by Institute for Fashion and Textiles at Designskolen Kolding,  appoints the potentials and challenges in relation to the ongoing academization of design schools, with a specific focus on fashion research. The key......, interactionistic interviews (Järvinen and Mik-Meyer, 2005) with key persons from the respective research- and fashion departments from eight selected design schools in Holland, England and USA. The analysis of each case is inspired by Edgar E. Schein’s levels of culture (Schein 1994), that aims to pinpoint both...

Development of the Statistical Reasoning in Biology Concept Inventory (SRBCI).

Science.gov (United States)

Deane, Thomas; Nomme, Kathy; Jeffery, Erica; Pollock, Carol; Birol, Gülnur

2016-01-01

We followed established best practices in concept inventory design and developed a 12-item inventory to assess student ability in statistical reasoning in biology (Statistical Reasoning in Biology Concept Inventory [SRBCI]). It is important to assess student thinking in this conceptual area, because it is a fundamental requirement of being statistically literate and associated skills are needed in almost all walks of life. Despite this, previous work shows that non-expert-like thinking in statistical reasoning is common, even after instruction. As science educators, our goal should be to move students along a novice-to-expert spectrum, which could be achieved with growing experience in statistical reasoning. We used item response theory analyses (the one-parameter Rasch model and associated analyses) to assess responses gathered from biology students in two populations at a large research university in Canada in order to test SRBCI's robustness and sensitivity in capturing useful data relating to the students' conceptual ability in statistical reasoning. Our analyses indicated that SRBCI is a unidimensional construct, with items that vary widely in difficulty and provide useful information about such student ability. SRBCI should be useful as a diagnostic tool in a variety of biology settings and as a means of measuring the success of teaching interventions designed to improve statistical reasoning skills. © 2016 T. Deane et al. CBE—Life Sciences Education © 2016 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Examining the Criterion-Related Validity of the Pervasive Developmental Disorder Behavior Inventory

Science.gov (United States)

McMorris, Carly A.; Perry, Adrienne

2015-01-01

The Pervasive Developmental Disorder Behavior Inventory is a questionnaire designed to aid in the diagnosis of pervasive developmental disorders or autism spectrum disorders. The Pervasive Developmental Disorder Behavior Inventory assesses adaptive and maladaptive behaviors associated with pervasive developmental disorders and provides an…

Design Research: Aesthetic Epistemology and Explanatory Knowledge

Directory of Open Access Journals (Sweden)

Peter Murphy

Full Text Available The article explores the “what” and the “how” of design research. It discusses the epistemological assumptions of design and design research—the conception of true knowledge that underpins the quest to advance design knowledge through research. The article also examines the media and methods of doing design research—that is, the “how” of such research. As it developed over the past century, the design field has drawn extensively on three pivotal but often tacitly deployed epistemologies: the Platonic-Aristotelian, the pragmatic, and the postmodern. Platonic epistemology is latent in many commonplace design instruction texts. Pragmatic epistemology underscores the industrial-arts ethos of design. Postmodern epistemologies dominate in university programs—especially graduate and Ph.D. programs. The article considers how these competing epistemologies understand the role of imagination in the act of creation. The article then considers the role of explanation in the carrying out of research in creative design and arts fields. It addresses whether, and to what degree, design research ought to rely on explanatory words as its principal medium of research, or whether it is valid to substitute artifactual creation for intellectual explanation in the research process. Key words: Epistemology, Design, Imagination, Knowledge, Explanation, Practice-based research

Application of Response Surface Methodology in Optimizing a Three Echelon Inventory System

Directory of Open Access Journals (Sweden)

Seyed Hossein Razavi Hajiagha

2014-01-01

Full Text Available Inventory control is an important subject in supply chain management. In this paper, a three echelon production, distribution, inventory system composed of one producer, two wholesalers and a set of retailers has been considered. Costumers' demands follow a compound Poisson process and the inventory policy is a kind of continuous review (R, Q. In this paper, regarding the standard cost structure in an inventory model, the cost function of system has been approximated using Response Surface Methodology as a combination of designed experiments, simulation, regression analysis and optimization. The proposed methodology in this paper can be applied as a novel method in optimization of inventory policy of supply chains. Also, the joint optimization of inventory parameters, including reorder point and batch order size, is another advantage of the proposed methodology.

Lessons from a large-scale assessment: Results from conceptual inventories

Directory of Open Access Journals (Sweden)

Beth Thacker

2014-07-01

Full Text Available We report conceptual inventory results of a large-scale assessment project at a large university. We studied the introduction of materials and instructional methods informed by physics education research (PER (physics education research-informed materials into a department where most instruction has previously been traditional and a significant number of faculty are hesitant, ambivalent, or even resistant to the introduction of such reforms. Data were collected in all of the sections of both the large algebra- and calculus-based introductory courses for a number of years employing commonly used conceptual inventories. Results from a small PER-informed, inquiry-based, laboratory-based class are also reported. Results suggest that when PER-informed materials are introduced in the labs and recitations, independent of the lecture style, there is an increase in students’ conceptual inventory gains. There is also an increase in the results on conceptual inventories if PER-informed instruction is used in the lecture. The highest conceptual inventory gains were achieved by the combination of PER-informed lectures and laboratories in large class settings and by the hands-on, laboratory-based, inquiry-based course taught in a small class setting.

Inventory of primary particulates emissions; Inventaire des emissions de particules primaires

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-12-01

CITEPA carried out a national inventory on particulate emissions. This report presents the results of this study for a great number of sectors and it covers a larger number of sources than the previous CITEPA inventories on particles and some other inventories carried out by International organisms (TNO, IIASA). In particular, at the present time, fugitive dust emissions for some sources are rarely taken into account in inventories because of poor knowledge and they are still the subject of researches in order to validate the emission results. (author)

Inventory Management and the Impact of Anticipation in Evolutionary Stochastic Online Dynamic Optimization

NARCIS (Netherlands)

P.A.N. Bosman (Peter); J.A. La Poutré (Han)

2007-01-01

htmlabstractInventory management (IM) is an important area in logistics. The goal is to manage the inventory of a vendor as efficiently as possible. Its practical relevance also makes it an important real-world application for research in optimization. Because inventory must be managed over time, IM

2009 National inventory of radioactive material and wastes. Synthesis report

International Nuclear Information System (INIS)

2009-01-01

Third edition of the ANDRA's national inventory report on radioactive wastes that are present on the French territory (as recorded until december, 2007). After a brief historical review of the national inventory and the way it is constructed, the report gives the basics on radioactive wastes, their classification, origins and management processes, followed by a general presentation and discussion of the inventory results (radioactive wastes and materials). Results are then detailed for the different activity sectors using radioactive materials (nuclear industry, medical domain, scientific research, conventional industry, Defense...). Information is also given concerning radioactive polluted areas (characterization and site management) and radioactive waste inventories in various foreign countries

Communicating Qualitative Research Study Designs to Research Ethics Review Boards

Science.gov (United States)

Ells, Carolyn

2011-01-01

Researchers using qualitative methodologies appear to be particularly prone to having their study designs called into question by research ethics or funding agency review committees. In this paper, the author considers the issue of communicating qualitative research study designs in the context of institutional research ethics review and offers…

Development of a Meiosis Concept Inventory

Science.gov (United States)

Kalas, Pamela; O'Neill, Angie; Pollock, Carol; Birol, Gulnur

2013-01-01

We have designed, developed, and validated a 17-question Meiosis Concept Inventory (Meiosis CI) to diagnose student misconceptions on meiosis, which is a fundamental concept in genetics. We targeted large introductory biology and genetics courses and used published methodology for question development, which included the validation of questions by…

Addressing Research Design Problem in Mixed Methods Research

Science.gov (United States)

Alavi, Hamed; Hąbek, Patrycja

2016-03-01

Alongside other disciplines in social sciences, management researchers use mixed methods research more and more in conduct of their scientific investigations. Mixed methods approach can also be used in the field of production engineering. In comparison with traditional quantitative and qualitative research methods, reasons behind increasing popularity of mixed research method in management science can be traced in different factors. First of all, any particular discipline in management can be theoretically related to it. Second is that concurrent approach of mixed research method to inductive and deductive research logic provides researchers with opportunity to generate theory and test hypothesis in one study simultaneously. In addition, it provides a better justification for chosen method of investigation and higher validity for obtained answers to research questions. Despite increasing popularity of mixed research methods among management scholars, there is still need for a comprehensive approach to research design typology and process in mixed research method from the perspective of management science. The authors in this paper try to explain fundamental principles of mixed research method, its typology and different steps in its design process.

Statistics and quality assurance for the Northern Research Station Forest Inventory and Analysis Program

Science.gov (United States)

Dale D. Gormanson; Scott A. Pugh; Charles J. Barnett; Patrick D. Miles; Randall S. Morin; Paul A. Sowers; James A. Westfall

2018-01-01

The U.S. Forest Service Forest Inventory and Analysis (FIA) program collects sample plot data on all forest ownerships across the United States. FIA’s primary objective is to determine the extent, condition, volume, growth, and use of trees on the Nation’s forest land through a comprehensive inventory and analysis of the Nation’s forest resources. The FIA program...

Conceptual coherence of non-Newtonian worldviews in Force Concept Inventory data

Directory of Open Access Journals (Sweden)

Terry F. Scott

2017-05-01

Full Text Available The Force Concept Inventory is one of the most popular and most analyzed multiple-choice concept tests used to investigate students’ understanding of Newtonian mechanics. The correct answers poll a set of underlying Newtonian concepts and the coherence of these underlying concepts has been found in the data. However, this inventory was constructed after several years of research into the common preconceptions held by students and using these preconceptions as distractors in the questions. Their sole purpose is to deflect non-Newtonian candidates away from the correct answer. Alternatively, one can argue that the responses could also be treated as polling these preconceptions. In this paper we shift the emphasis of the analysis away from the correlation structure of the correct answers and look at the latent traits underlying the incorrect responses. Our analysis models the data employing exploratory factor analysis, which uses regularities in the data to suggest the existence of underlying structures in the cognitive processing of the students. This analysis allows us to determine whether the data support the claim that there are alternate non-Newtonian worldviews on which students’ incorrect responses are based. The existence of such worldviews, and their coherence, could explain the resilience of non-Newtonian preconceptions and would have significant implications to the design of instruction methods. We find that there are indeed coherent alternate conceptions of the world which can be categorized using the results of the research that led to the construction of the Force Concept Inventory.

Towards Soil and Sediment Inventories of Black Carbon

Science.gov (United States)

Masiello, C. A.

2008-12-01

A body of literature on black carbon (BC) concentrations in soils and sediments is rapidly accumulating, but as of yet, there are no global or regional inventories of BC in either reservoir. Soil and sediment BC inventories are badly needed for a range of fields. For example, in oceanography a global sediment BC inventory is crucial in understanding the role of biomass burning in the development of stable marine carbon reservoirs, including dissolved organic carbon and sedimentary organic carbon. Again in the marine environment, BC likely strongly impacts the fate and transport of anthropogenic pollutants: regional inventories of BC in sediments will help develop better environmental remediation strategies. In terrestrial systems well-constrained natural BC soil inventories would help refine ecological, agricultural, and soil biogeochemical studies. BC is highly sorptive of nutrients including nitrogen and phosphorous. The presence of BC in ecosystems almost certainly alters N and P cycling; however, without soil BC inventories, we cannot know where BC has a significant impact. BC's nutrient sorptivity and water-holding capacity make it an important component of agricultural soils, and some researchers have proposed artificially increasing soil BC inventories to improve soil fertility. Natural soil BC concentrations in some regions are quite high, but without a baseline inventory, it is challenging to predict when agricultural amendment will significantly exceed natural conditions. And finally, because BC is one of the most stable fractions of organic carbon in soils, understanding its concentration and regional distribution will help us track the dynamics of soil organic matter response to changing environmental conditions. Developing effective regional and global BC inventories is challenging both because of data sparsity and methodological intercomparison issues. In this presentation I will describe a roadmap to generating these valuable inventories.

TIARA analysis of tritium inventory in Li2O

International Nuclear Information System (INIS)

Billone, M.C.

1995-01-01

The TIARA code has been developed to predict tritium inventory in Li 2 O breeder ceramic and to predict purge exit flow rate and composition under steady-state operating conditions. Inventory predictions are based on models for bulk diffusion, surface desorption, solubility and precipitation. Parameters for these models are determined from the results of laboratory annealing studies on unirradiated and irradiated Li 2 O and from a limited number (2) of inventory data measured after in-reactor purge flow testing. The remaining inventory data points (18) are used for code validation. In the validation exercise, models and model parameters are fixed prior to running the validation cases to assess how well TIARA predictions agree with data. On average, the TIARA predictions are in excellent agreement with the inventory data from the following in-reactor tests: EXOTIC-2, SIBELIUS, VOM-15H, CRITIC-1, BEATRIX-II (Phase 1) thin ring, and BEATRIX-II (Phase 1) thick pellet. Thus, TIARA can be used with a reasonable degree of confidence for design analysis over a broad range of fabrication variables and steady-state operating conditions. (orig.)

Investigation of tritium inventory and permeation behaviour in the liquid breeder blanket concept of Demo as a function of design and material parameters

International Nuclear Information System (INIS)

Tominetti, S.; Perujo, A.; Reiter, F.

1991-01-01

A numerical code has been used to estimate the time dependence of tritium inventory and of tritium transport into the coolant, into the first wall boxes and through the liquid breeder in the Pb-17Li blanket concept of DEMO. Several issues in both design and material parameters have been considered and the effect on inventory and permeation of coatings with low surface recombination coefficient and/or low diffusivity at various surfaces of the structural material has been studied. TiC has been chosen as reference material for these calculations and a general database on coating efficiency as a function of its properties has also been produced on the basis of TiC data

Evaluation in Design-Oriented Research

NARCIS (Netherlands)

Verschuren, P.J.M.; Hartog, R.J.M.

2005-01-01

Design has been recognized for a long time both as art and as science. In the sixties of the previous century design-oriented research began to draw the attention of scientific researchers and methodologists, not only in technical engineering but also in the social sciences. However, a rather

National inventory of Global Change relevant research in Norway; Nasjonal kartlegging av global change-relevant forskning

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-05-01

The Norwegian Global Change Committee has made an inventory of global change research (GCR) projects funded by the Research Council of Norway (RCN) in 2001. In lack of a rigid definition, GCR was defined as research that can be considered relevant to the science agenda of the four major international global change programmes DIVERSITAS, IGBP, IHDP and WCRP. Relevance was judged based on the objectives stated for each of the international programmes and their core projects. It was not attempted to check whether the projects had any kind of link to the programmes they were considered relevant for. The grants provided by the RCN in 2001 to GCR as defined above amounts to about 77 mill. NOK. Based on a recent survey on climate change research it is reasonable to estimate that the RCN finances between 30 and 40 % of all GCR in Norway. Accordingly, the total value of Norwegian research relevant to the four international global change programmes in 2001 can be estimated to 192 - 254 mill. NOK.

Fashion Research at Design Schools

DEFF Research Database (Denmark)

Skjold, Else

2008-01-01

on fashion education and fashion research, that are “taken for granted” in the institutional culture of each case. Because of the diversity between the cases, a cultural-oriented comparison has been made, where every case is perceived as idiographically unique (Thyge Winther-Jensen 2004). Descriptions......The report “Fashion Research at Design Schools” (2008), which was commissioned by Institute for Fashion and Textiles at Designskolen Kolding,  appoints the potentials and challenges in relation to the ongoing academization of design schools, with a specific focus on fashion research. The key...... research question is: “What kind of fashion design education is Designskolen Kolding aiming to offer in the future, what kind of skills will the students need in their future work place, the fashion industry, and can research work as a potential in this process?”   The study is based on qualitative...

Research oriented projects on design themese

DEFF Research Database (Denmark)

Tollestrup, Christian; Eriksen, Kaare; Ovesen, Nis

2011-01-01

How can design students do research-oriented projects about design themes? At the 3rd semester at the Industrial Design Master Program at Aalborg University this is done by taking research oriented learning objectives on design theories and methods and combining them with experimental case studie...... and professional self-reflection amongst students are improved....

Estimation of global inventories of radioactive waste and other radioactive materials

International Nuclear Information System (INIS)

2008-06-01

A variety of nuclear activities have been carried out in the second part of the twentieth century for different purposes. Initially the emphasis was on military applications, but with the passage of time the main focus of nuclear activities has shifted to peaceful uses of nuclear energy and to the use of radioactive material in industry, medicine and research. Regardless of the objectives, the nuclear activities generate radioactive waste. It was considered worthwhile to produce a set of worldwide data that could be assessed to evaluate the legacy of the nuclear activities performed up to the transition between the twentieth and the twenty first century. The assessment tries to cover the inventory of all the human produced radioactive material that can be considered to result from both military and civilian applications. This has caused remarkable difficulties since much of the data, particularly relating to military programmes, are not readily available. Consequently the data on the inventory of radioactive material should be considered as order-of-magnitude approximations. This report as a whole should be considered as a first iteration in a continuing process of updating and upgrading. The accumulations of radioactive materials can be considered a burden for human society, both at present and in the future, since they require continuing monitoring and control. Knowing the amounts and types of such radioactive inventories can help in the assessment of the relative burdens. Knowledge of the national or regional radioactive waste inventory is necessary for planning management operations, including the sizing and design of conditioning, storage and disposal facilities. A global inventory, either of radioactive waste or of other environmental accumulations of radioactive material, could be used to provide a perspective on the requirements and burdens associated with their management, by means of comparisons with the burdens caused by other types of waste or other

The Irrational Beliefs Inventory : cross cultural comparisons between American and Dutch samples

NARCIS (Netherlands)

Bridges, K.Robert; Sanderman, Robbert

2002-01-01

The 50-item Irrational Beliefs Inventory (IBI) was developed in the Netherlands for the assessment of irrational thinking. The IBI was derived from the Rational Behavior Inventory (RBI) and the Irrational Beliefs Test (IBT). The present study was designed to assess the applicability of the IBI in a

Game design research: an introduction to theory & practice

OpenAIRE

Lankoski, Petri; Holopainen, Jussi

2017-01-01

Design research is an active academic field covering disciplines such as architecture, graphic, product, service, interaction, and systems design. Design research aims to understand not only the designed end products but also how design as an activity unfolds. The book demonstrates different approaches to design research in game design research.

Design research and industrial applicability

DEFF Research Database (Denmark)

Andreasen, Mogens Myrup

1997-01-01

Imprinted paper (copies of overheads in English) on the nature of design research, the transformation process for industrial utilization and the challenges of ENDREA from industry.......Imprinted paper (copies of overheads in English) on the nature of design research, the transformation process for industrial utilization and the challenges of ENDREA from industry....

How Design-based Research, Action Research and Interaction Design Contributes to the Development of Designs for Learning

DEFF Research Database (Denmark)

Majgaard, Gunver; Misfeldt, Morten; Nielsen, Jacob

2011-01-01

This article explores how action research, design based research and interaction design can be combined and used in the development of educational robotic tools. Our case study is the development of Number Blocks and it combines physical interaction, learning, and immediate feedback. Number Blocks...... supports the children's understanding of place value in the sense that it allows them to experiment with creating large numbers. The development was done in collaboration with a class of 7-8 year old children and their mathematics teacher. The article argues that elements from different research methods...... allowed a structured approach to projects that combines educational research and innovation of new learning technologies. Key elements of this approach is acknowledging the users input, developing a theoretical pre-analysis and using an iterative approach....

The Savannah River Site Waste Inventory Management Program

International Nuclear Information System (INIS)

Griffith, J.M.; Holmes, B.R.

1995-01-01

Each hazardous and radioactive waste generator that delivers waste to Savannah River Site (SRS) treatment, storage and disposal (TSD) facilities is required to implement a waste certification plan. The waste certification process ensures that waste has been properly identified, characterized, segregated, packaged, and shipped according to the receiving facilities waste acceptance criteria. In order to comply with the rigid acceptance criteria, the Reactor Division developed and implemented the Waste Inventory Management Program (WIMP) to track the generation and disposal of low level radioactive waste. The WIMP system is a relational database with integrated barcode technology designed to track the inventory radioactive waste. During the development of the WIMP several waste minimization tools were incorporated into the design of the program. The inclusion of waste minimization tools as part of the WIMP has resulted in a 40% increase in the amount of waste designated as compactible and an overall volume reduction of 5,000 cu-ft

An Analysis of Inventory Management of T-Shirt at Mahanagari Bandung Pisan

Directory of Open Access Journals (Sweden)

Togar M Simatupang

2012-01-01

Full Text Available Inventory management plays an important role in business activity for fulfilling the demandfrom the customer. Mahanagari Bandung Pisan, a retail company that runs its business indesigning and creating the merchandise of Bandung, currently faces a problem within itsinventory management of T-shirt, the main product of the company that contributes about 79percent of the whole total sales. The company produces a high number of inventories, butthere is still lost sales occurred. This research is aimed at reviewing and finding the rootcauses of the problems occurred within inventory management of T-shirt in MahanagariBandung Pisan, by using the concept of inventory cycle for describing the current systemimplemented by Mahanagari Bandung Pisan in planning and managing the inventory of Tshirt.From the research, there are four main problems faced by the company in managing theinventory of the T-shirt. Those problems are inaccurate forecasting, unfixed schedule inordering the T-shirt to the vendor, lateness from vendor, and the office does not know currentcondition of T-shirt’s inventory. This paper proposed some solutions for solving the problem,which are combining the intuitive prediction method with moving average model for gettingthe more accurate demand forecasting, making the timeline in controlling and producing theinventory of T-shirt, implementing periodical control system and put a clause about sanctionin the contract made by Mahanagari Bandung Pisan and the vendor and controlling thesalesperson everyday and creating the rules about inventory recording.Key words: inventory management, inventory cycle, mahanagari bandung pisan, forecasting,t-shirt

Databases for highway inventories. Proposal for a new model

Energy Technology Data Exchange (ETDEWEB)

Perez Casan, J.A.

2016-07-01

Database models for highway inventories are based on classical schemes for relational databases: many related tables, in which the database designer establishes, a priori, every detail that they consider relevant for inventory management. This kind of database presents several problems. First, adapting the model and its applications when new database features appear is difficult. In addition, the different needs of different sets of road inventory users are difficult to fulfil with these schemes. For example, maintenance management services, road authorities and emergency services have different needs. In addition, this kind of database cannot be adapted to new scenarios, such as other countries and regions (that may classify roads or name certain elements differently). The problem is more complex if the language used in these scenarios is not the same as that used in the database design. In addition, technicians need a long time to learn to use the database efficiently. This paper proposes a flexible, multilanguage and multipurpose database model, which gives an effective and simple solution to the aforementioned problems. (Author)

Reducing Inventory System Costs by Using Robust Demand Estimators

OpenAIRE

Raymond A. Jacobs; Harvey M. Wagner

1989-01-01

Applications of inventory theory typically use historical data to estimate demand distribution parameters. Imprecise knowledge of the demand distribution adds to the usual replenishment costs associated with stochastic demands. Only limited research has been directed at the problem of choosing cost effective statistical procedures for estimating these parameters. Available theoretical findings on estimating the demand parameters for (s, S) inventory replenishment policies are limited by their...

Investigating Psychometric Properties of the Persian Version of Positive Psychotherapy Inventory

Directory of Open Access Journals (Sweden)

Z Ghorbani

2015-08-01

Full Text Available The purpose of the study was to investigate psychometric properties of the Persian version of positive psychotherapy inventory in university students. Research method was descriptive, correlational type. The sample of the study consist of 432 MS and PhD students, 225 female and 207 male, aged between 23 to 45 of state universities of Tehran who were selected through multi-stage random sampling. To study reliability, convergent and structural validity of instrument the sample group completed, positive psychotherapy inventory (Rashid and Oxford Happiness Inventory (Argyle and Hills. To investigating the reliability Cronbach alpha and test- retest method, and for validity of instrument structural validity exploratory factor analysis method and convergent validity were used. Results showed the total internal consistency of positive psychotherapy inventory was 0.80 and subscales internal consistency was between 0.80 to 0.92 respectively. In addition test-retest reliability coefficient was 0.70 for total inventory and between 0.63 to 0.73 for the subscales. Also the correlation coefficients between positive psychotherapy inventory and oxford happiness inventory were 0.73, which indicated a satisfactory convergent validity for positive psychotherapy inventory. Confirmatory factor analysis results showed three factors model of positive psychotherapy inventory in the Iranian sample. These three factors explained 79.99 variance of total inventory.

State-of-the-art inventory

NARCIS (Netherlands)

Verhagen, H.J.; Van Gerven, K.A.J.; Akkerman, G.J.

2005-01-01

The present report provides a state-of-the-art inventory of relevant information and technical concepts for the ComCoast project, being the first phase of the research stages of Work Package 3 (WP3). This project was assigned to Royal Haskoning by CUR. The information scan was set-up in a systematic

Vascular Plant and Vertebrate Inventory of Saguaro National Park, Tucson Mountain District

Science.gov (United States)

Powell, Brian F.; Halvorson, William L.; Schmidt, Cecilia A.

2007-01-01

This report summarizes the results of the first comprehensive inventory of plants and vertebrates at the Tucson Mountain District (TMD) of Saguaro National Park, Arizona. From 2001 to 2003 we surveyed for vascular plants and vertebrates (amphibians, reptiles, birds, and mammals) at the district to document the presence of species within its boundaries. Park staff also carried out extensive infrared-triggered camera work for medium and large mammals from 2002-2005 and results from that effort are reported here. Our spatial sampling design for all taxa employed a combination of random and nonrandom survey sites. Survey effort was greatest for medium and large mammals and herpetofauna. Because we used repeatable study designs and standardized field methods, these inventories can serve as the first step in a biological monitoring program for the district. We also provide an overview of previous survey efforts in the district. We use data from our inventory and other surveys to compile species lists and to assess inventory completeness. The survey effort for herpetofauna, birds, and medium and large mammals was the most comprehensive ever undertaken in the district. We recorded a total of 320 plant and vertebrate species, including 21 species not previously found in the district (Table 1). Based on a review of our inventory and past research at the district, there have been a total of 723 species of plants and vertebrates found there. We believe inventories for most taxonomic groups are nearly complete. Based on our surveys, we believe the native plant and vertebrate community compositions of the district are relatively intact, though some species loss has occurred and threats are increasing, particularly to herpetofauna and larger mammals. Of particular note is the relatively small number of non-native species and their low abundance in the district, which is in contrast to many nearby natural areas. Rapidly expanding development on the west, north, and east sides of

78 FR 52964 - Availability of HUD's Fiscal Years 2011 and 2012 Service Contract Inventories

Science.gov (United States)

2013-08-27

... and 2012 Service Contract Inventories AGENCY: Office of the Chief Procurement Officer, HUD. ACTION... inventories that were awarded in FY 2011 and FY 2012. The inventories are organized by function and are... insure HUD maintains an adequate workforce for operations and to research whether contractors were...

Procedure for taking physical inventories

International Nuclear Information System (INIS)

Anon.

1981-01-01

This session is intended to apprise one of the various aspects of procedures and routines that Exxon Nuclear uses with respect to its nuclear materials physical inventory program. The presentation describes how plant physical inventories are planned and taken. The description includes the planning and preparation for taking the inventory, the clean-out procedures for converting in-process material to measurable items, the administrative procedures for establishing independent inventory teams and for inventorying each inventory area, the verification procedures used to include previously measured tamper-safed items in the inventory, and lastly, procedures used to reconcile the inventory and calculate MUF (materials unaccounted for). The purpose of the session is to enable participants to: (1) understand the planning and pre-inventorty procedures and their importance; (2) understand the need for and the required intensity of clean-out procedures; (3) understand how inventory teams are formed, and how the inventory is conducted; (4) understand the distinction between inventory previously measured tamper-safed items and other materials not so characterized; (5) understand the reconciliation procedures; and (6) calculate a MUF given the book and inventory results

Optimizing inventory management in the insulation manufacturing industry

OpenAIRE

Herbert-Hansen, Zaza Nadja Lee; Larsen, Samuel

2016-01-01

Inventory issues within the insulation manufacturing industry are essential for competitiveness. However, they are largely unexplored in academic literature. Therefore the aim of this paper is to address the research question: “What approach to inventory management provides the best balance between service level and cost for the insulation manufacturing industry?” This is done through an in-depth case study of a world-leading company within this industry, with focus on two of its factories. T...

Improvement of Inventory Control Using Continuous Review Policy in A Local Hospital at Bandung City, Indonesia

Directory of Open Access Journals (Sweden)

Fina Hafnika

2016-12-01

Full Text Available Abstract. This research was aimed to analyze the excess inventories issue in pharmacy and medical equipment unit at a local hospital in Bandung which affected the service level of the hospital. As one of the busy hospital in Java, proven by the higher amount of the patient/year than in other average Java typical hospital, the hospital needs to concern about the pharmaceutical and medical equipment inventories in order to fulfill patients’ needs and in the same time keeping the inventory level under control. Therefore, an inventory control evaluation was conducted to determine the appropriate number of inventories and time of order to avoid the excessive goods in central warehouse of the hospital. By using probabilistic inventory model and continuous review policy, the pharmaceutical inventory in the hospital was calculated to compare the ideal and actual amount of the average inventory level (AIL. ABC (Always, Better, Control classification also classified in this research to identify the proper item which potentially can be reduced from the inventory. From the analysis, we have discovered that the hospital potentially able to reduce almost Rp 830 million or 57% from the overstock inventory level by using continuous review policy as the basis of inventory control calculation system. Keywords: Continuous review policy, inventory control, EOQ, ROP, AIL

Combined Log Inventory and Process Simulation Models for the Planning and Control of Sawmill Operations

Science.gov (United States)

Guillermo A. Mendoza; Roger J. Meimban; Philip A. Araman; William G. Luppold

1991-01-01

A log inventory model and a real-time hardwood process simulation model were developed and combined into an integrated production planning and control system for hardwood sawmills. The log inventory model was designed to monitor and periodically update the status of the logs in the log yard. The process simulation model was designed to estimate various sawmill...

Applied statistical designs for the researcher

CERN Document Server

Paulson, Daryl S

2003-01-01

Research and Statistics Basic Review of Parametric Statistics Exploratory Data Analysis Two Sample Tests Completely Randomized One-Factor Analysis of Variance One and Two Restrictions on Randomization Completely Randomized Two-Factor Factorial Designs Two-Factor Factorial Completely Randomized Blocked Designs Useful Small Scale Pilot Designs Nested Statistical Designs Linear Regression Nonparametric Statistics Introduction to Research Synthesis and "Meta-Analysis" and Conclusory Remarks References Index.

Designing interaction, voice, and inclusion in AAC research.

Science.gov (United States)

Pullin, Graham; Treviranus, Jutta; Patel, Rupal; Higginbotham, Jeff

2017-09-01

The ISAAC 2016 Research Symposium included a Design Stream that examined timely issues across augmentative and alternative communication (AAC), framed in terms of designing interaction, designing voice, and designing inclusion. Each is a complex term with multiple meanings; together they represent challenging yet important frontiers of AAC research. The Design Stream was conceived by the four authors, researchers who have been exploring AAC and disability-related design throughout their careers, brought together by a shared conviction that designing for communication implies more than ensuring access to words and utterances. Each of these presenters came to AAC from a different background: interaction design, inclusive design, speech science, and social science. The resulting discussion among 24 symposium participants included controversies about the role of technology, tensions about independence and interdependence, and a provocation about taste. The paper concludes by proposing new directions for AAC research: (a) new interdisciplinary research could combine scientific and design research methods, as distant yet complementary as microanalysis and interaction design, (b) new research tools could seed accessible and engaging contextual research into voice within a social model of disability, and (c) new open research networks could support inclusive, international and interdisciplinary research.

Incorporating location, routing, and inventory decisions in a bi-objective supply chain design problem with risk-pooling

Science.gov (United States)

Tavakkoli-Moghaddam, Reza; Forouzanfar, Fateme; Ebrahimnejad, Sadoullah

2013-07-01

This paper considers a single-sourcing network design problem for a three-level supply chain. For the first time, a novel mathematical model is presented considering risk-pooling, the inventory existence at distribution centers (DCs) under demand uncertainty, the existence of several alternatives to transport the product between facilities, and routing of vehicles from distribution centers to customer in a stochastic supply chain system, simultaneously. This problem is formulated as a bi-objective stochastic mixed-integer nonlinear programming model. The aim of this model is to determine the number of located distribution centers, their locations, and capacity levels, and allocating customers to distribution centers and distribution centers to suppliers. It also determines the inventory control decisions on the amount of ordered products and the amount of safety stocks at each opened DC, selecting a type of vehicle for transportation. Moreover, it determines routing decisions, such as determination of vehicles' routes starting from an opened distribution center to serve its allocated customers and returning to that distribution center. All are done in a way that the total system cost and the total transportation time are minimized. The Lingo software is used to solve the presented model. The computational results are illustrated in this paper.

Evaluation of hospital medication inventory policies.

Science.gov (United States)

Gebicki, Marek; Mooney, Ed; Chen, Shi-Jie Gary; Mazur, Lukasz M

2014-09-01

As supply chain costs constitute a large portion of hospitals' operating expenses and with $27.7 billion spent by the US hospitals on drugs alone in 2009, improving medication inventory management provides a great opportunity to decrease the cost of healthcare. This study investigates different management approaches for a system consisting of one central storage location, the main pharmacy, and multiple dispensing machines located in each department. Each medication has a specific unit cost, availability from suppliers, criticality level, and expiration date. Event-driven simulation is used to evaluate the performance of several inventory policies based on the total cost and patient safety (service level) under various arrangements of the system defined by the number of drugs and departments, and drugs' criticality, availability, and expiration levels. Our results show that policies that incorporate drug characteristics in ordering decisions can address the tradeoff between patient safety and cost. Indeed, this study shows that such policies can result in higher patient safety and lower overall cost when compared to traditional approaches. Additional insights from this study allow for better understanding of the medication inventory system's dynamics and suggest several directions for future research in this topic. Findings of this study can be applied to help hospital pharmacies with managing their inventory.

Intermediate/Advanced Research Design and Statistics

Science.gov (United States)

Ploutz-Snyder, Robert

2009-01-01

The purpose of this module is To provide Institutional Researchers (IRs) with an understanding of the principles of advanced research design and the intermediate/advanced statistical procedures consistent with such designs

Conducting Educational Design Research

Science.gov (United States)

McKenney, Susan; Reeves, Thomas

2012-01-01

Educational design research blends scientific investigation with systematic development and implementation of solutions to educational problems. Empirical investigation is conducted in real learning settings--not laboratories--to craft usable and effective solutions. At the same time, the research is carefully structured to produce theoretical…

Inventory - Dollars and sense

International Nuclear Information System (INIS)

Samson, J.R.

1992-01-01

Nuclear utilities are becoming more aware of the importance of having an inventory investment that supports two opposing philosophies. The business philosophy wants a minimal inventory investment to support a better return on invested dollars. This increase in return comes from having the dollars available to invest versus having the money tied up in inventory sitting on the shelf. The opposing viewpoint is taken by maintenance/operations organizations, which desire the maximum inventory available on-site to repair any component at any time to keep the units on-line at all times. Financial managers also want to maintain cash flow throughout operations so that plants run without interruptions. Inventory management is therefore a mixture of financial logistics with an operation perspective in mind. A small amount of common sense and accurate perception also help. The challenge to the materials/inventory manager is to optimize effectiveness of the inventory by having high material availability at the lowest possible cost

New developments in emissions inventory activity along the northern border region of Mexico

Energy Technology Data Exchange (ETDEWEB)

Oliver, W.R.; Dickson, R.J.; Creelman, L.W. [Radian International LLC, Sacramento, CA (United States)] [and others

1996-12-31

The development and evaluation of emissions data for sources located along the Mexico/US border have accelerated over the past few years. This paper examines several new activities in emissions inventory development for the northern border of Mexico. Reviewed in this paper are the following recent developments that will lead to improved inventories for Mexico: development of inventory educational materials; creation of inventory manuals; estimation of emissions for unique sources; emissions-related studies; and identification of key research needs for Mexico inventories. Some of these activities are building a greater capacity in Mexico to construct emissions estimates. These topics are reviewed from the perspective of improving Mexico emissions inventories and emissions estimation capabilities.

Time-dependent tritium inventories and flow rates in fuel cycle components of a tokamak fusion reactor

International Nuclear Information System (INIS)

Kuan, W.

1995-01-01

Time-dependent inventories and flow rates for several components of the fuel cycle are modeled and studied through the use of a new modular-type model for the dynamic simulation of the fuel cycle in a fusion reactor. The complex dynamic behavior in the modeled subsystems is analyzed using this new model. Preliminary results using fuel cycle design configurations similar to ITER are presented and analyzed. The inventories and flow rates inside the primary vacuum pumping, fuel cleanup unit and isotope separation system are studied. Ways to minimize the tritium inventory are also assessed. This was performed by looking at various design options that could be used to minimize tritium inventory for specific components. (orig.)

A psychometric evaluation of the digital logic concept inventory

Science.gov (United States)

Herman, Geoffrey L.; Zilles, Craig; Loui, Michael C.

2014-10-01

Concept inventories hold tremendous promise for promoting the rigorous evaluation of teaching methods that might remedy common student misconceptions and promote deep learning. The measurements from concept inventories can be trusted only if the concept inventories are evaluated both by expert feedback and statistical scrutiny (psychometric evaluation). Classical Test Theory and Item Response Theory provide two psychometric frameworks for evaluating the quality of assessment tools. We discuss how these theories can be applied to assessment tools generally and then apply them to the Digital Logic Concept Inventory (DLCI). We demonstrate that the DLCI is sufficiently reliable for research purposes when used in its entirety and as a post-course assessment of students' conceptual understanding of digital logic. The DLCI can also discriminate between students across a wide range of ability levels, providing the most information about weaker students' ability levels.

Experimental design research approaches, perspectives, applications

CERN Document Server

Stanković, Tino; Štorga, Mario

2016-01-01

This book presents a new, multidisciplinary perspective on and paradigm for integrative experimental design research. It addresses various perspectives on methods, analysis and overall research approach, and how they can be synthesized to advance understanding of design. It explores the foundations of experimental approaches and their utility in this domain, and brings together analytical approaches to promote an integrated understanding. The book also investigates where these approaches lead to and how they link design research more fully with other disciplines (e.g. psychology, cognition, sociology, computer science, management). Above all, the book emphasizes the integrative nature of design research in terms of the methods, theories, and units of study—from the individual to the organizational level. Although this approach offers many advantages, it has inherently led to a situation in current research practice where methods are diverging and integration between individual, team and organizational under...

The Role of Hypothesis in Constructive Design Research

DEFF Research Database (Denmark)

Bang, Anne Louise; Krogh, Peter; Ludvigsen, Martin

2012-01-01

It is, today, widely appreciated that Research-through-Design – or Constructive Design Research as we will call it in this paper – allows for designers to produce knowledge based on the skills and capacities of the design field itself. However, most of the research fails to bridge the gap between...... the general notions of constructive design research and the detailed research activities of the field. We therefore suggest bridging this methodological gap in the academic discussion with what we have ended up calling the “entrance level of constructive design research”. As a step towards to a more nuanced...... and solid perspective on how to keep constructive design research on track, this paper offers a model for understanding the role of hypothesis in constructive design research. The model allows for understanding the hypothesis’s relation to research motivation, questions, experiments, evaluation...

Construct Validation--Community College Instructional Development Inventory

Science.gov (United States)

Xiong, Soua; Delgado, Nexi; Wood, J. Luke; Harris, Frank, III

2017-01-01

This white paper describes the construct validation of the Community College Instructional Development Inventory (CC-IDI). The CC-IDI is an institutional assessment tool designed to inform professional development programming for instructional faculty. The instrument was developed to serve as a standardized assessment tool to determine the…

EXPLORING LINKS AMONG INVENTORY AND FINANCIAL PERFORMANCE IN THE AGRICULTURAL MACHINERY INDUSTRY

Directory of Open Access Journals (Sweden)

Dimitris Folinas

2014-10-01

Full Text Available The paper aims to investigate the effects of Inventory Turnover and Inventory Days on firm performance in the United Kingdom agricultural machinery industry by examining past literature reviews and empirical evidence of a primary research. Specific performance measures such as Earnings before Interest and Tax to Sales Ratio, Gross Profit to Sales Ratio, and Return on Assets are examined by conducting statistical analyses to determine the correlations between inventory and financial performance in agricultural machinery industry. The analysis of Inventory Turnover with financial performance measures doesn’t indicate any links between these variables. Furthermore, based on the results, Inventory Days plays a role in the financial performance of organisations however to varying degrees.

2009 National inventory of radioactive material and wastes. Geographical inventory

International Nuclear Information System (INIS)

2009-01-01

A geographical inventory of the radioactive wastes present on the French territory (as recorded until the 31 of december, 2007) is presented, region by region. The various types of waste sites (production, processing, conditioning and storage sites, Uranium mines, ANDRA storage centers, historical storage sites and polluted sites where wastes are stored) are listed and located on maps. Details are given on the nature and origin of these wastes (nuclear industry, medical domain, scientific research, conventional industry, Defense...). A total of 1121 sites have been recorded, among which 163 are presented with details and charts

Emission inventory estimation of an intercity bus terminal.

Science.gov (United States)

Qiu, Zhaowen; Li, Xiaoxia; Hao, Yanzhao; Deng, Shunxi; Gao, H Oliver

2016-06-01

Intercity bus terminals are hotspots of air pollution due to concentrated activities of diesel buses. In order to evaluate the bus terminals' impact on air quality, it is necessary to estimate the associated mobile emission inventories. Since the vehicles' operating condition at the bus terminal varies significantly, conventional calculation of the emissions based on average emission factors suffers the loss of accuracy. In this study, we examined a typical intercity bus terminal-the Southern City Bus Station of Xi'an, China-using a multi-scale emission model-(US EPA's MOVES model)-to quantity the vehicle emission inventory. A representative operating cycle for buses within the station is constructed. The emission inventory was then estimated using detailed inputs including vehicle ages, operating speeds, operating schedules, and operating mode distribution, as well as meteorological data (temperature and humidity). Five functional areas (bus yard, platforms, disembarking area, bus travel routes within the station, and bus entrance/exit routes) at the terminal were identified, and the bus operation cycle was established using the micro-trip cycle construction method. Results of our case study showed that switching to compressed natural gas (CNG) from diesel fuel could reduce PM2.5 and CO emissions by 85.64 and 6.21 %, respectively, in the microenvironment of the bus terminal. When CNG is used, tail pipe exhaust PM2.5 emission is significantly reduced, even less than brake wear PM2.5. The estimated bus operating cycles can also offer researchers and policy makers important information for emission evaluation in the planning and design of any typical intercity bus terminals of a similar scale.

TIARA analysis of tritium inventory in Li{sub 2}O

Energy Technology Data Exchange (ETDEWEB)

Billone, M.C.

1994-05-01

The TIARA code has been developed to predict tritium inventory in Li{sub 2}O breeder ceramic and to predict purge exit flow rate and composition under steady-state operating conditions. Inventory predictions are based on models for bulk diffusion, surface desorption, solubility and precipitation. Parameters for these models are determined from the results of laboratory annealing studies on unirradiated and irradiated Li{sub 2}O and from a limited number (2) of inventory data measured after in-reactor purge-flow testing. The remaining inventory data points (18) are used for code validation. In the validation exercise, models and model parameters are fixed to assess how well TIARA predictions agree with data. On the average, the TIARA predictions are in excellent agreement with the inventory data from the following in-reactor tests: EXOTIC-2, SIBELIUS, VOM-15H, CRITIC-1, BEATRIX-II (Phase 1) thin ring, and BEATRIX-II (Phase 1) thick pellet. Thus, TIARA can be used with a reasonable degree of confidence for design analysis over a broad range of fabrication variables and steady-state operating conditions.

Nuclear material inventory estimation in solvent extraction contractors II

International Nuclear Information System (INIS)

Beyerlein, A.

1987-11-01

The effectiveness of near-real-time nuclear materials accounting in reprocessing facilities can be limited by inventory variations in the separations contactors. Investigations are described in three areas: (i) Improvements in the model that the authors have described previously for the steady state inventory estimation in mixer-settler contactors, (ii) extension for the model for steady state inventory estimation to transient inventory estimation for non-steady state conditions, and (iii) the development of a computer model CUSEP (Clemson University Solvent Extraction Program) for simulating the concentration profiles and nuclear material inventories in pulsed column contactors. Improvements in the steady state model that are described in this report are the simplification of the methods for evaluating model parameters and development of methods for reducing the equation which estimates the total inventory of the set of contactors directly. The pulsed column computer model CUSEP (Clemson University Solvent Extraction Program) was developed. Concentration profiles and inventories calculated from CUSEP are compared with measured data from pilot scale contactors containing uranium. Excellent agreement between measured and simulated data for both the concentration profile and inventories is obtained, demonstrating that the program correctly predicts the concentration dispersion caused by pulsing and the dispersed phase holdup within the contactor. Further research to investigate (i) correction of the MUF (Material Unaccounted For) and CUMUF (Cumulative Material Unaccounted For) tests for mixer-settler contactor inventory using the simplified model developed in this work, (ii) development of a simple inventory estimation model for pulsed column contactors similar to that developed for mixer-settler contactors using CUSEP to provide necessary database, and (iii) sources of bias appearing in the MUF and CUMUF tests using computer simulation techniques are planned. Refs

Instructional design considerations promoting engineering design self-efficacy

Science.gov (United States)

Jackson, Andrew M.

Engineering design activities are frequently included in technology and engineering classrooms. These activities provide an open-ended context for practicing critical thinking, problem solving, creativity, and innovation---collectively part of the 21st Century Skills which are increasingly needed for success in the workplace. Self-efficacy is a perceptual belief that impacts learning and behavior. It has been shown to directly impact each of these 21st Century Skills but its relation to engineering design is only recently being studied. The purpose of this study was to examine how instructional considerations made when implementing engineering design activities might affect student self-efficacy outcomes in a middle school engineering classroom. Student responses to two self-efficacy inventories related to design, the Engineering Design Self-Efficacy Instrument and Creative Thinking Self-Efficacy Inventory, were collected before and after participation in an engineering design curriculum. Students were also answered questions on specific factors of their experience during the curriculum which teachers may exhibit control over: teamwork and feedback. Results were analyzed using Pearson's correlation coefficients, paired and independent t-tests, and structural equation modeling to better understand patterns for self-efficacy beliefs in students. Results suggested that design self-efficacy and creative thinking self-efficacy are significantly correlated, r(1541) = .783, p classroom strategies for increasing self-efficacy and given specific recommendations related to teamwork and feedback to support students. Finally, although there were weaknesses in the study related to the survey administration, future research opportunities are presented which may build from this work.

Standards for large-scale forest inventories. A comparative study for Italy

Directory of Open Access Journals (Sweden)

2004-01-01

Full Text Available A comparison has been made between methodologies for forest inventories in Italy, considering aspects as design, sampling units, attributes, forest definitions, statistical methods, estimation models, information quality. Main differences concern the definition of forest categories and the emphasis given to forest attributes like biodiversity, carbon stock, recreational value, geological instability, forest health, which are all increasingly considered in last generation forest inventories.

An inventory location routing model with environmental considerations

Directory of Open Access Journals (Sweden)

Lerhlaly Sanaa

2017-01-01

Full Text Available In this work we consider an integrated Inventory Location Routing problem ILRP. The objective is to select depots to open, the routes to perform distribution from the capacitated depots to the clients by a homogeneous fleet of vehicles and over a multi-period planning horizon. To solve the problem, an exact model is designed in order to minimize the total cost (location, routing and inventory and the routing CO2 emissions, while respecting transport and storage constraints for a hazardous material. We have also studied an industrial real case to illustrate the problem.

THE POSSIBILITIES OF THE STRUCTURE AND VARIABILITY EVALUATION OF INVENTORY CONSUMPTION

Directory of Open Access Journals (Sweden)

Petr Besta

2015-09-01

Full Text Available Inventory can be evaluated from the point of view of a number of aspects. Production and trade organizations nowadays are under great pressure from their competitors and face high expectations from their customers. That is why the cost cutting in all areas can provide a significant competitive advantage. Inventory and its management and administration can therefore represent a source of substantial potential savings. Large inventory volume can significantly increase the costs, but its shortage influences the course of the manufacturing process and, ultimately, the customer satisfaction. It is therefore necessary to continuously optimize the inventory management system in the enterprise. The conducted research also involved an analysis of the structure and variability of the inventory consumption in a business organization dealing with the sale and storage of metallurgical materials. The objective of this article is to evaluate the possibility of the application of the tools used to analyze the structure and variability of inventories in the industrial and commercial practice.

Tritium Inventory in ARIES-AT

International Nuclear Information System (INIS)

Longhurst, Glen R.

2001-01-01

This report documents an investigation into the tritium inventory expected in the ARIES-AT fusion reactor. ARIES-AT features silicon carbide fibers in a silicon carbide matrix as its primary construction. It uses the same fusion power core as the previous ARIES-RS. Based on experimental results of several researchers, consideration was given to swelling, sputtering, film coatings, erosion, and implantation. Estimates were made of tritium inventory using the TMAP4 code. About 700 g of tritium may be expected in the machine, two thirds of which would reside in the first wall. Under assumed accident conditions that involve first wall temperatures up to 1000 C, evolution of retained tritium may be expected to vary from 0.8 to nearly 40 percent depending on the temperature of the first wall

ITER divertor, design issues and research and development

International Nuclear Information System (INIS)

Tivey, R.; Ando, T.; Antipenkov, A.; Barabash, V.; Chiocchio, S.; Federici, G.; Ibbott, C.; Jakeman, R.; Janeschitz, G.; Raffray, R.; Mazul, I.; Pacher, H.; Ulrickson, M.; Vieider, G.

1999-01-01

Over the period of the ITER Engineering Design Activity (EDA) the results from physics experiments, modelling, engineering analyses and R and D, have been brought together to provide a design for an ITER divertor. The design satisfies all necessary requirements for steady state and transient heat flux, nuclear shielding, pumping, tritium inventory, impurity control, armour lifetime, electromagnetic loads, diagnostics, and remote maintenance. The design consists of 60 cassettes each comprising a cassette body onto which the plasma facing components (PFCs) are mounted. Each cassette is supported by toroidal rails which are attached to the vacuum vessel. For the PFCs the final armour choice is carbon-fibre-composite (CfC) for the strike point regions and tungsten in all remaining areas. R and D has demonstrated that CfC monoblocks can routinely withstand heat loads up to 20 MW m -2 10 MW m -2 . Analysis and experiment show that a CfC armour thickness of ∝20 mm will provide sufficient lifetime for at least 1000 full power pulses. The thickness of the cassette body is sufficient to shield the vacuum vessel, so that, if necessary, rewelding is possible, and also provides sufficient stiffness against electromagnetically generated loads. The cassette design provides efficient and proven remote maintenance which should allow exchange of a complete divertor within ∝6 months. (orig.)

ITER divertor, design issues and research and development

Energy Technology Data Exchange (ETDEWEB)

Tivey, R.; Ando, T.; Antipenkov, A.; Barabash, V.; Chiocchio, S.; Federici, G.; Ibbott, C.; Jakeman, R.; Janeschitz, G.; Raffray, R. [ITER Joint Central Team, Garching (Germany). Joint Central Work Site; Akiba, M. [Japan Atomic Energy Research Institute, Naka-machi, Ibaraki-ken (Japan); Mazul, I. [Efremov Institute, St Petersburg (Russian Federation); Pacher, H. [NET Team, Boltzmannstr. 2, D-85748, Garching (Germany); Ulrickson, M. [Sandia National Laboratories, Albuquerque, NM (United States); Vieider, G. [NET Team, Boltzmannstr. 2, D-85748, Garching (Germany)

1999-11-01

Over the period of the ITER Engineering Design Activity (EDA) the results from physics experiments, modelling, engineering analyses and R and D, have been brought together to provide a design for an ITER divertor. The design satisfies all necessary requirements for steady state and transient heat flux, nuclear shielding, pumping, tritium inventory, impurity control, armour lifetime, electromagnetic loads, diagnostics, and remote maintenance. The design consists of 60 cassettes each comprising a cassette body onto which the plasma facing components (PFCs) are mounted. Each cassette is supported by toroidal rails which are attached to the vacuum vessel. For the PFCs the final armour choice is carbon-fibre-composite (CfC) for the strike point regions and tungsten in all remaining areas. R and D has demonstrated that CfC monoblocks can routinely withstand heat loads up to 20 MW m{sup -2}10 MW m{sup -2}. Analysis and experiment show that a CfC armour thickness of {proportional_to}20 mm will provide sufficient lifetime for at least 1000 full power pulses. The thickness of the cassette body is sufficient to shield the vacuum vessel, so that, if necessary, rewelding is possible, and also provides sufficient stiffness against electromagnetically generated loads. The cassette design provides efficient and proven remote maintenance which should allow exchange of a complete divertor within {proportional_to}6 months. (orig.)

Inventory of armourstone

Directory of Open Access Journals (Sweden)

Le Turdu Valéry

2016-01-01

Full Text Available Natural armourstone is widely used for hydraulic works, both in the coastal domain and in border of rivers and torrents, especially to protect against flood and the effects of waves and currents. To meet the expectations associated with this resource, an inventory of armourstone quarries was realized on a national scale in France. This inventory informs not only about the localization of quarries but also about the quality and the availability of materials. To fully optimize this inventory in a dynamic format, the association of all actors of the sector was preferred to archival research. This partnership approach led to project deliverables that can constitute durably a shared reference. The database can indeed be updated regularly thanks to the contacts established with the professionals of quarries. The access to this database is offered to a wide public: maritime and fluvial ports, local authorities in charge of planning and managing structures that protect against flood and other hydraulic hazards. This new database was organized considering its importance on the operational plan. This led to a hierarchical organization at two levels for each quarry face: first level, a synthesis sheet brings the essential information to realize choices upstream to the operational phases. Second level, a detailed specification sheet presents the technical characteristics observed in the past on the considered face. The atlas has two information broadcasting formats: a pdf file with browsing functions and a geographical information system that allows remote request of the database. These two media have their own updating rhythms, annual for the first and continue for the second.

Three types of children’s informational web sites: an inventory of design conventions

NARCIS (Netherlands)

Jochmann-Mannak, Hanna; Lentz, Leo; Huibers, Theo W.C.; Sanders, Ted

2012-01-01

"Purpose: Research on Web design conventions has an almost exclusive focus on Web design for adults. There is far less knowledge about Web design for children. For the first time, an overview is presented of the current design conventions for children's informational Web sites. Method: In this study

Maladaptive Personality Trait Models: Validating the Five-Factor Model Maladaptive Trait Measures With the Personality Inventory for DSM-5 and NEO Personality Inventory.

Science.gov (United States)

Helle, Ashley C; Mullins-Sweatt, Stephanie N

2017-05-01

Eight measures have been developed to assess maladaptive variants of the five-factor model (FFM) facets specific to personality disorders (e.g., Five-Factor Borderline Inventory [FFBI]). These measures can be used in their entirety or as facet-based scales (e.g., FFBI Affective Dysregulation) to improve the comprehensiveness of assessment of pathological personality. There are a limited number of studies examining these scales with other measures of similar traits (e.g., DSM-5 alternative model). The current study examined the FFM maladaptive scales in relation to the respective general personality traits of the NEO Personality Inventory-Revised and the pathological personality traits of the DSM-5 alternative model using the Personality Inventory for DSM-5. The results indicated the FFM maladaptive trait scales predominantly converged with corresponding NEO Personality Inventory-Revised, and Personality Inventory for DSM-5 traits, providing further validity for these measures as extensions of general personality traits and evidence for their relation to the pathological trait model. Benefits and applications of the FFM maladaptive scales in clinical and research settings are discussed.

Beyond Borders: Participatory Design Research and the Changing Role of Design

Science.gov (United States)

Blair-Early, Adream

2010-01-01

University art and design programs are branching out and creating cross-disciplinary programs and research centers that connect design students and faculty across various disciplines such as business, engineering, architecture, information studies, health sciences and education. A human-centered, problem-based approach to design research looks to…

Using design science in educational technology research projects

Directory of Open Access Journals (Sweden)

Susan M. Chard

2017-12-01

Full Text Available Design science is a research paradigm where the development and evaluation of a technology artefact is a key contribution. Design science is used in many domains and this paper draws on those domains to formulate a generic structure for design science research suitable for educational technology research projects. The paper includes guidelines for writing proposals using the design science research methodology for educational technology research and presents a generic research report structure. The paper presents ethical issues to consider in design science research being conducted in educational settings and contributes guidelines for assessment when the research contribution involves the creation of a technology artefact.

Considering inventory distributions in a stochastic periodic inventory routing system

Science.gov (United States)

Yadollahi, Ehsan; Aghezzaf, El-Houssaine

2017-07-01

Dealing with the stochasticity of parameters is one of the critical issues in business and industry nowadays. Supply chain planners have difficulties in forecasting stochastic parameters of a distribution system. Demand rates of customers during their lead time are one of these parameters. In addition, holding a huge level of inventory at the retailers is costly and inefficient. To cover the uncertainty of forecasting demand rates, researchers have proposed the usage of safety stock to avoid stock-out. However, finding the precise level of safety stock depends on forecasting the statistical distribution of demand rates and their variations in different settings among the planning horizon. In this paper the demand rate distributions and its parameters are taken into account for each time period in a stochastic periodic IRP. An analysis of the achieved statistical distribution of the inventory and safety stock level is provided to measure the effects of input parameters on the output indicators. Different values for coefficient of variation are applied to the customers' demand rate in the optimization model. The outcome of the deterministic equivalent model of SPIRP is simulated in form of an illustrative case.

An overview of inventory and monitoring and the Role of FIA in National Assessments

Science.gov (United States)

W. Brad Smith

2006-01-01

This paper presents a brief conceptual overview of inventory and monitoring and the role of the Forest Inventory and Analysis (FIA) program in national assessments. FIA has become a focal point of national inventory and monitoring and kept national leadership as well as forest resource research and management professionals apprised, through periodic reports to Congress...

Assessment of Used Nuclear Fuel Inventory Relative to Disposition Options

International Nuclear Information System (INIS)

Wagner, John C.; Peterson, Joshua L.; Mueller, Don; Gehin, Jess C.; Worrall, Andrew; Taiwo, Temitope; Nutt, Mark; Williamson, Mark A.; Todosow, Mike; Wigeland, Roald; Halsey, William; Omberg, Ronald; Swift, Peter; Carter, Joe

2013-01-01

This paper presents a technical assessment of the current inventory [∼70,150 metric tons of heavy metal (MTHM) as of 2011] of U.S.-discharged used nuclear fuel (UNF) to support decisions regarding fuel cycle strategies and research, development and demonstration (RD and D) needs. The assessment considered discharged UNF from commercial nuclear electricity generation and defense and research programs and determined that the current UNF inventory can be divided into the following three categories: 1. Disposal - excess material that is not needed for other purposes; 2. Research - material needed for RD and D purposes to support waste management (e.g., UNF storage, transportation, and disposal) and development of alternative fuel cycles (e.g., separations and advanced fuels/reactors); and 3. Recycle/Recovery - material with inherent and/or strategic value. A set of key assumptions and attributes relative to the disposition options was used to categorize the current UNF inventory. Based on consideration of RD and D needs, time frames and material needs for deployment of alternative fuel cycles, characteristics of the current UNF inventory, and possible uses to support national security interests, it was determined that the vast majority of the category, without the need for retrieval for reuse or research purposes. Access to the material in the Research and Recycle/Recovery categories should be retained to support RD and D needs and national security interests. This assessment does not assume any decision about future fuel cycle options or preclude any potential options, including those with potential recycling of commercial UNF, since the ∼2,000 MTHM that is generated annually could provide the feedstock needed for deployment of alternative fuel cycles.

ITER Dynamic Tritium Inventory Modeling Code

International Nuclear Information System (INIS)

Cristescu, Ioana-R.; Doerr, L.; Busigin, A.; Murdoch, D.

2005-01-01

A tool for tritium inventory evaluation within each sub-system of the Fuel Cycle of ITER is vital, with respect to both the process of licensing ITER and also for operation. It is very likely that measurements of total tritium inventories may not be possible for all sub-systems, however tritium accounting may be achieved by modeling its hold-up within each sub-system and by validating these models in real-time against the monitored flows and tritium streams between the systems. To get reliable results, an accurate dynamic modeling of the tritium content in each sub-system is necessary. In order to optimize the configuration and operation of the ITER fuel cycle, a dynamic fuel cycle model was developed progressively in the decade up to 2000-2001. As the design for some sub-systems from the fuel cycle (i.e. Vacuum pumping, Neutral Beam Injectors (NBI)) have substantially progressed meanwhile, a new code developed under a different platform to incorporate these modifications has been developed. The new code is taking over the models and algorithms for some subsystems, such as Isotope Separation System (ISS); where simplified models have been previously considered, more detailed have been introduced, as for the Water Detritiation System (WDS). To reflect all these changes, the new code developed inside EU participating team was nominated TRIMO (Tritium Inventory Modeling), to emphasize the use of the code on assessing the tritium inventory within ITER

A Modular Integrated RFID System for Inventory Control Applications

Directory of Open Access Journals (Sweden)

Ross Bunker

2017-01-01

Full Text Available Recent advances in single-board computer technology have allowed for lightweight, power-efficient devices, such as the Raspberry Pi, to take the place of desktop PCs in certain applications. This has the potential to disrupt the way many current systems are structured, particularly for inventory management and control applications. In this paper, we explore the design and topology of a modular Radio frequency identification (RFID system for inventory management comprised of self-contained, autonomous scanning, and stationary control PCs in a handheld/portable configuration. While similar solutions for such a system may exist on the commercial market, this proposed development provides a template for an open source flexible, low-cost solution that can be easily expanded to meet the needs of businesses with large and small inventories.

INVENTORY MANAGEMENT IN THE ENTERPRISE THROUGH THE APPLICATION OF IFRS 2 INVENTORIES

Directory of Open Access Journals (Sweden)

Svetlozar Stefanov

2016-07-01

Full Text Available The focus in the article is on the issues of valuation and presentation of the inventories under the meaning on the International Accounting Standard 2 Inventories. The Standard provides guidance on the determination of costs of finished products and its recognition as and expense in the production and sale finished products, including guidance for determination of the net realizable value. The latter is defined as the estimated selling price less the estimated costs of completion and estimated costs necessary to make the sale. The cost of inventories comprises all costs of purchase, cost of conversion and other costs incurred in bringing the inventories to a condition suitable for subsequent use. The amount of the cost for materials used or products sold and the finished product is determined using one of the following methods: a specifically defined value, first-in � first out or weighted average cost of lots delivered. When inventories are sold, the carrying amount of those inventories is recognized as an expense in the period in which the related sales revenue is recognized. The amount of any write-down of inventories to net realizable value is recorded as a current expense and is recognized as an expense in the period the write-down occurs.

Brief Report: Translation and Adaptation of the Theory of Mind Inventory to Spanish

Science.gov (United States)

Pujals, Elena; Batlle, Santiago; Camprodon, Ester; Pujals, Sílvia; Estrada, Xavier; Aceña, Marta; Petrizan, Araitz; Duñó, Lurdes; Martí, Josep; Martin, Luis Miguel; Pérez-Solá, Víctor

2016-01-01

The Theory of Mind Inventory is an informant measure designed to evaluate children's theory of mind competence. We describe the translation and cultural adaptation of the inventory by the following process: (1) translation from English to Spanish by two independent certified translators; (2) production of an agreed version by a multidisciplinary…

Vascular Plant and Vertebrate Inventory of Montezuma Castle National Monument

Science.gov (United States)

Schmidt, Cecilia A.; Drost, Charles A.; Halvorson, William Lee

2006-01-01

Executive Summary We summarize past inventory efforts for vascular plants and vertebrates at Montezuma Castle National Monument (NM) in Arizona. We used data from previous research to compile complete species lists for the monument and to assess inventory completeness. There have been 784 species recorded at Montezuma Castle NM, of which 85 (11%) are non-native. In each taxon-specific chapter we highlight areas of resources that contributed to species richness or unique species for the monument. Of particular importance are Montezuma Well and Beaver and Wet Beaver creeks and the surrounding riparian vegetation, which are responsible for the monument having one of the highest numbers of bird species in the Sonoran Desert Network of park units. Beaver Creek is also home to populations of federally-listed fish species of concern. Other important resources include the cliffs along the creeks and around Montezuma Well (for cliff and cave roosting bats). Based on the review of past studies, we believe the inventory for most taxa is nearly complete, though some rare or elusive species will be added with additional survey effort. We recommend additional inventory, monitoring and research studies.

Estimating dead wood during national forest inventories: a review of inventory methodologies and suggestions for harmonization.

Science.gov (United States)

Woodall, Christopher W; Rondeux, Jacques; Verkerk, Pieter J; Ståhl, Göran

2009-10-01

Efforts to assess forest ecosystem carbon stocks, biodiversity, and fire hazards have spurred the need for comprehensive assessments of forest ecosystem dead wood (DW) components around the world. Currently, information regarding the prevalence, status, and methods of DW inventories occurring in the world's forested landscapes is scattered. The goal of this study is to describe the status, DW components measured, sample methods employed, and DW component thresholds used by national forest inventories that currently inventory DW around the world. Study results indicate that most countries do not inventory forest DW. Globally, we estimate that about 13% of countries inventory DW using a diversity of sample methods and DW component definitions. A common feature among DW inventories was that most countries had only just begun DW inventories and employ very low sample intensities. There are major hurdles to harmonizing national forest inventories of DW: differences in population definitions, lack of clarity on sample protocols/estimation procedures, and sparse availability of inventory data/reports. Increasing database/estimation flexibility, developing common dimensional thresholds of DW components, publishing inventory procedures/protocols, releasing inventory data/reports to international peer review, and increasing communication (e.g., workshops) among countries inventorying DW are suggestions forwarded by this study to increase DW inventory harmonization.

National protocol framework for the inventory and monitoring of bees

Science.gov (United States)

Droege, Sam; Engler, Joseph D.; Sellers, Elizabeth A.; Lee O'Brien,

2016-01-01

This national protocol framework is a standardized tool for the inventory and monitoring of the approximately 4,200 species of native and non-native bee species that may be found within the National Wildlife Refuge System (NWRS) administered by the U.S. Fish and Wildlife Service (USFWS). However, this protocol framework may also be used by other organizations and individuals to monitor bees in any given habitat or location. Our goal is to provide USFWS stations within the NWRS (NWRS stations are land units managed by the USFWS such as national wildlife refuges, national fish hatcheries, wetland management districts, conservation areas, leased lands, etc.) with techniques for developing an initial baseline inventory of what bee species are present on their lands and to provide an inexpensive, simple technique for monitoring bees continuously and for monitoring and evaluating long-term population trends and management impacts. The latter long-term monitoring technique requires a minimal time burden for the individual station, yet can provide a good statistical sample of changing populations that can be investigated at the station, regional, and national levels within the USFWS’ jurisdiction, and compared to other sites within the United States and Canada. This protocol framework was developed in cooperation with the United States Geological Survey (USGS), the USFWS, and a worldwide network of bee researchers who have investigated the techniques and methods for capturing bees and tracking population changes. The protocol framework evolved from field and lab-based investigations at the USGS Bee Inventory and Monitoring Laboratory at the Patuxent Wildlife Research Center in Beltsville, Maryland starting in 2002 and was refined by a large number of USFWS, academic, and state groups. It includes a Protocol Introduction and a set of 8 Standard Operating Procedures or SOPs and adheres to national standards of protocol content and organization. The Protocol Narrative

Research on Multi-leg Inventory Control Based on Passenger Choice

OpenAIRE

Fan, Wei; Su, Qiubo; Ip, Wai Hung

2014-01-01

To remedy the lack of mathematical programming and the Expected Marginal Seat Revenue (EMSR) model for multi-leg seat inventory control, this paper proposes a method based on passenger choice. Except for data about which seats passengers decide to opt for, there is no need to obtain distributions of passengers’ demands or other “a priori” information. The proposed method can discover the real factors that affect passengers’ choices, and then estimate the probabilities of seat choices and the ...

Design research and the globalization of healthcare environments.

Science.gov (United States)

Shepley, Mardelle McCuskey; Song, Yilin

2014-01-01

Global healthcare practice has expanded in the past 20 years. At the same time the incorporation of research into the design process has gained prominence as a best practice among architects. The authors of this study investigated the status of design research in a variety of international settings. We intended to answer the question, "how pervasive is healthcare design research outside of the United States?" The authors reviewed the international literature on the design of healthcare facilities. More than 500 international studies and conference proceedings were incorporated in this literature review. A team of five research assistants searched multiple databases comparing approximately 16 keywords to geographic location. Some of those keywords included: evidence-based design, salutogenic design, design research, and healthcare environment. Additional articles were gathered by contacting prominent researchers and asking for their personal assessment of local health design research studies. While there are design researchers in most parts of the world, the majority of studies focus on the needs of populations in developed countries and generate guidelines that have significant cost and cultural implications that prohibit their implementation in developing countries. Additionally, the body of literature discussing the role of culture in healthcare environments is extremely limited. Design researchers must address the cultural implications of their studies. Additionally, we need to expand our research objectives to address healthcare design in countries that have not been previous considered. © 2014 Vendome Group, LLC.

World Glacier Inventory

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The World Glacier Inventory (WGI) contains information for over 130,000 glaciers. Inventory parameters include geographic location, area, length, orientation,...

The Role of Hypothesis in Constructive Design Research

OpenAIRE

Bang, Anne Louise; Krogh, Peter; Ludvigsen, Martin; Markussen, Thomas

2012-01-01

It is, today, widely appreciated that Research-through-Design – or Constructive Design Research as we will call it in this paper – allows for designers to produce knowledge based on the skills and capacities of the design field itself.However, most of the research fails to bridge the gap between the general notions of constructive design research and the detailed research activities of the field. We therefore suggest bridging this methodological gap in the academic discussion with what we hav...

Available Reprocessing and Recycling Services for Research Reactor Spent Nuclear Fuel

International Nuclear Information System (INIS)

2017-01-01

The high enriched uranium (HEU) take back programmes will soon have achieved their goals. When there are no longer HEU inventories at research reactors and no commerce in HEU for research reactors, the primary driver for the take back programmes will cease. However, research reactors will continue to operate in order to meet their various mission objectives. As a result, inventories of low enriched uranium spent nuclear fuel will continue to be created during the research reactors' lifetime and, therefore, there is a need to develop national final disposition routes. This publication is designed to address the issues of available reprocessing and recycling services for research reactor spent fuel and discusses the various back end management aspects of the research reactor fuel cycle.

Computer Science Concept Inventories: Past and Future

Science.gov (United States)

Taylor, C.; Zingaro, D.; Porter, L.; Webb, K. C.; Lee, C. B.; Clancy, M.

2014-01-01

Concept Inventories (CIs) are assessments designed to measure student learning of core concepts. CIs have become well known for their major impact on pedagogical techniques in other sciences, especially physics. Presently, there are no widely used, validated CIs for computer science. However, considerable groundwork has been performed in the form…

Research and Design in Landscape Architecture

NARCIS (Netherlands)

Nijhuis, S.; Bobbink, I.; Jauslin, D.T.

2011-01-01

This paper aims to introduce the particular methodology of the author's and their colleagues at TU Delft Chair of Landscape Architecture. This approach is characterised by theories, methods and techniques converging towards design and research and research by design. The relation and interaction

Challenges and opportunities in the design and construction of a GIS-based emission inventory infrastructure for the Niger Delta region of Nigeria.

Science.gov (United States)

Fagbeja, Mofoluso A; Hill, Jennifer L; Chatterton, Tim J; Longhurst, James W S; Akpokodje, Joseph E; Agbaje, Ganiy I; Halilu, Shaba A

2017-03-01

Environmental monitoring in middle- and low-income countries is hampered by many factors which include enactment and enforcement of legislations; deficiencies in environmental data reporting and documentation; inconsistent, incomplete and unverifiable data; a lack of access to data; and technical expertise. This paper describes the processes undertaken and the major challenges encountered in the construction of the first Niger Delta Emission Inventory (NDEI) for criteria air pollutants and CO 2 released from the anthropogenic activities in the region. This study focused on using publicly available government and research data. The NDEI has been designed to provide a Geographic Information System-based component of an air quality and carbon management framework. The NDEI infrastructure was designed and constructed at 1-, 10- and 20-km grid resolutions for point, line and area sources using industry standard processes and emission factors derived from activities similar to those in the Niger Delta. Due to inadequate, incomplete, potentially inaccurate and unavailable data, the infrastructure was populated with data based on a series of best possible assumptions for key emission sources. This produces outputs with variable levels of certainty, which also highlights the critical challenges in the estimation of emissions from a developing country. However, the infrastructure is functional and has the ability to produce spatially resolved emission estimates.

Drivers of Finished-Goods Inventory in the U.S. Automobile Industry

OpenAIRE

Gérard P. Cachon; Marcelo Olivares

2010-01-01

Automobile manufacturers in the U.S. supply chain exhibit significant differences in their days of supply of finished vehicles (average inventory divided by average daily sales rate). For example, from 1995 to 2004, Toyota consistently carried approximately 30 fewer days of supply than General Motors. This suggests that Toyota's well-documented advantage in manufacturing efficiency, product design, and upstream supply chain management extends to their finished-goods inventory in their downstr...

Inventory of alloy composition, microstructures and mechanical ...

African Journals Online (AJOL)

Inventory of alloy composition, microstructures and mechanical properties of automobile engine parts. ... Journal of Applied Science, Engineering and Technology ... This research work investigated the chemical compositions, microstructures and mechanical properties of the ferrous and non-ferrous auto engine parts such ...

Vendor-managed inventory

DEFF Research Database (Denmark)

Govindan, Kannan

2013-01-01

Vendor-managed inventory (VMI) represents the methodology through which the upstream stage of a supply chain (vendor) takes responsibility for managing the inventories at the downstream stage (customer) based on previously agreed limits. VMI is another method by which supply chains can be managed...... review, we have identified six dimensions of VMI: namely, inventory, transportation, manufacturing, general benefits, coordination/collaboration, and information sharing. In addition, there are, three methodological classifications: modelling, simulation, and case studies. Finally, we will consider...

Warehouses information system design and development

Science.gov (United States)

Darajatun, R. A.; Sukanta

2017-12-01

Materials/goods handling industry is fundamental for companies to ensure the smooth running of their warehouses. Efficiency and organization within every aspect of the business is essential in order to gain a competitive advantage. The purpose of this research is design and development of Kanban of inventory storage and delivery system. Application aims to facilitate inventory stock checks to be more efficient and effective. Users easily input finished goods from production department, warehouse, customer, and also suppliers. Master data designed as complete as possible to be prepared applications used in a variety of process logistic warehouse variations. The author uses Java programming language to develop the application, which is used for building Java Web applications, while the database used is MySQL. System development methodology that I use is the Waterfall methodology. Waterfall methodology has several stages of the Analysis, System Design, Implementation, Integration, Operation and Maintenance. In the process of collecting data the author uses the method of observation, interviews, and literature.

Housing Inventory Count

Data.gov (United States)

Department of Housing and Urban Development — This report displays the data communities reported to HUD about the nature of their dedicated homeless inventory, referred to as their Housing Inventory Count (HIC)....

27 CFR 40.201 - Inventories.

Science.gov (United States)

2010-04-01

... PROCESSED TOBACCO Operations by Manufacturers of Tobacco Products Inventories and Reports § 40.201 Inventories. Every manufacturer of tobacco products shall make true and accurate inventories on Form 5210.9... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Inventories. 40.201...

Pushing boundaries: new directions in inventory techniques and applications: Forest Inventory and Analysis (FIA) symposium 2015

Science.gov (United States)

Sharon M. Stanton; Glenn A. Christensen

2016-01-01

These proceedings report invited presentations and contributions to the 2015 Forest Inventory and Analysis (FIA) Symposium, which was hosted by the Research and Development branch of the U.S. Forest Service. As the only comprehensive and continuous census of the forests in the United States, FIA provides strategic information needed to evaluate sustainability of...

Cost/Benefit Prioritization for Advanced Safeguards Research and Development

International Nuclear Information System (INIS)

DeMuth, S.F.; Adeli, R.; Thomas, K.E.

2008-01-01

A system level study utilizing commercially available Extend TM software, has been initiated to perform cost/benefit analyses for advanced safeguards research and development. The methodology is focused on estimating standard error in the inventory difference (SEID) for reprocessing and fuel fabrication facilities, for various proposed advanced safeguards measurement technologies. The inventory duration, and consequent number of inventories per year, is dictated by the detection of a significant quantity of special nuclear material (SNM). Detection is limited by the cumulative measurement uncertainty for the entire system. The cost of inventories is then compared with the cost of advanced instrumentation and/or process design changes. Current progress includes development of the methodology, future efforts will be focused on ascertaining estimated costs and performance. Case studies will be provided as examples of the methodology. (author)

Solving Inventory Routing Problems Using Location Based Heuristics

Directory of Open Access Journals (Sweden)

Paweł Hanczar

2014-01-01

Full Text Available Inventory routing problems (IRPs occur where vendor managed inventory replenishment strategies are implemented in supply chains. These problems are characterized by the presence of both transportation and inventory considerations, either as parameters or constraints. The research presented in this paper aims at extending IRP formulation developed on the basis of location based heuristics proposed by Bramel and Simchi-Levi and continued by Hanczar. In the first phase of proposed algorithms, mixed integer programming is used to determine the partitioning of customers as well as dates and quantities of deliveries. Then, using 2-opt algorithm for solving the traveling sales-person problem the optimal routes for each partition are determined. In the main part of research the classical formulation is extended by additional constraints (visit spacing, vehicle filling rate, driver (vehicle consistency, and heterogeneous fleet of vehicles as well as the additional criteria are discussed. Then the impact of using each of proposed extensions for solution possibilities is evaluated. The results of computational tests are presented and discussed. Obtained results allow to conclude that the location based heuristics should be considered when solving real life instances of IRP. (original abstract

The impact of decentralised control on firm-level inventory: evidence from the automotive industry

NARCIS (Netherlands)

de Leeuw, S.L.J.M.; Holweg, M.; Williams, G.

2011-01-01

Purpose: The purpose of this paper is to investigate the effect of decentralised control on finished goods inventory levels in a distribution system, and to identify the factors that determine the overall inventory level. Design/methodology/approach: The authors' study is based on a mixed method

Reinventing Learning: A Design-Research Odyssey

Science.gov (United States)

Abrahamson, Dor

2015-01-01

Design research is a broad, practice-based approach to investigating problems of education. This approach can catalyze the development of learning theory by fostering opportunities for transformational change in scholars' interpretation of instructional interactions. Surveying a succession of design-research projects, I explain how challenges in…

Accuracy assessment of the National Forest Inventory map of Mexico: sampling designs and the fuzzy characterization of landscapes

Directory of Open Access Journals (Sweden)

Stéphane Couturier

2009-10-01

Full Text Available There is no record so far in the literature of a comprehensive method to assess the accuracy of regional scale Land Cover/ Land Use (LCLU maps in the sub-tropical belt. The elevated biodiversity and the presence of highly fragmented classes hamper the use of sampling designs commonly employed in previous assessments of mainly temperate zones. A sampling design for assessing the accuracy of the Mexican National Forest Inventory (NFI map at community level is presented. A pilot study was conducted on the Cuitzeo Lake watershed region covering 400 000 ha of the 2000 Landsat-derived map. Various sampling designs were tested in order to find a trade-off between operational costs, a good spatial distribution of the sample and the inclusion of all scarcely distributed classes (‘rare classes’. A two-stage sampling design where the selection of Primary Sampling Units (PSU was done under separate schemes for commonly and scarcely distributed classes, showed best characteristics. A total of 2 023 punctual secondary sampling units were verified against their NFI map label. Issues regarding the assessment strategy and trends of class confusions are devised.

Research Design – Composition, Configuration and Interdependencies

DEFF Research Database (Denmark)

Kastberg, Peter

2016-01-01

In this essay I will present an integrative view on research design. I will introduce what I take to be the skeleton components of any research design within the social sciences, i.e. the elements of research question, philosophy of science, methodology, method and data. With this as my point...... of departure I will go on to focus on a presentation, a discussion and an evaluation of a new appreciation of the interdependencies of the elements in the research design. An appreciation that favors a relational rather than an atomistic outlook and which gives rise to an ecological conceptualization......). At a more concrete level, it aims at presenting an idea of research design which would – hopefully – be an inspiration to (young) scholars....

Belief in astrology inventory: development and validation.

Science.gov (United States)

Chico, Eliseo; Lorenzo-Seva, Urbano

2006-12-01

After the paper by Mayo, White, and Eysenck in 1978, a considerable number of papers studied the so-called sun-sign-effect predicted by astrology: people born with the sun in a positive sign are supposed to be extraverted, and those with the sun in a negative sign are supposed to be introverted. In these papers, researchers used ad hoc questionnaires with a few questions related to belief, knowledge, experience, or attitude toward astrology. However, an appropriate inventory with known psychometric properties has yet to be developed to assess the belief in astrology. In the present paper, the Belief in Astrology Inventory is presented with some psychometric data. The participants were 743 undergraduates studying Psychology and Social Sciences at a university in Spain. Correlation of scores on Belief in Astrology and Extraversion was small but significant (r = .22; r2 = .04) for positive sun-sign participants. This value accounts for negligible common variance. Women had significandy higher scores on the inventory than men.

Inventory of ABCC-RERF autopsies Hiroshima and Nagasaki, 1948-1980

International Nuclear Information System (INIS)

1983-10-01

This is the fourth inventory of ABCC-RERF autopsies which covers those performed from 1948-80 (the other three inventories). For general information the introduction of the third inventory (1948-70) is included with some modification, and deaths and autopsy rates for 1971-80 are added. ABCC-RERF performed 10,096 autopsies (6,555 in Hiroshima and 3,541 in Nagasaki) from 1948 to 1980. Protocols, tissues, sections, smears, etc., assembled by the collaborating institutions were examined by members of the ABCC Department of Pathology who completed ABCC records for each case. Copies of all protocols, gross tissues, and histological sections were placed in a designated repository in the Medical School of each city where they are available to all qualified and interested investigators. (J.P.N.)

National Coal Quality Inventory (NACQI)

Energy Technology Data Exchange (ETDEWEB)

Robert Finkelman

2005-09-30

The U.S. Geological Survey (USGS) conducted the National Coal Quality Inventory (NaCQI) between 1999 and 2005 to address a need for quality information on coals that will be mined during the next 20-30 years. Collaboration between the USGS, State geological surveys, universities, coal burning utilities, and the coal mining industry plus funding support from the Electric Power Research Institute (EPRI) and the U.S. Department of Energy (DOE) permitted collection and submittal of coal samples for analysis. The chemical data (proximate and ultimate analyses; major, minor and trace element concentrations) for 729 samples of raw or prepared coal, coal associated shale, and coal combustion products (fly ash, hopper ash, bottom ash and gypsum) from nine coal producing States are included. In addition, the project identified a new coal reference analytical standard, to be designated CWE-1 (West Elk Mine, Gunnison County, Colorado) that is a high-volatile-B or high-volatile-A bituminous coal with low contents of ash yield and sulfur, and very low, but detectable contents of chlorine, mercury and other trace elements.

Pakistan: Preliminary National Greenhouse Gas Inventory | KHAN ...

African Journals Online (AJOL)

PROMOTING ACCESS TO AFRICAN RESEARCH ... The gases covered in the inventory are the direct greenhouse gases (carbon ... Industrial processes, Agriculture, Land?use change and forestry and Waste (guided by Intergovernmental Panel on Climate Change). ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Functional Assessment Inventory Manual.

Science.gov (United States)

Crewe, Nancy M.; Athelstan, Gary T.

This manual, which provides extensive new instructions for administering the Functional Assessment Inventory (FAI), is intended to enable counselors to begin using the inventory without undergoing any special training. The first two sections deal with the need for functional assessment and issues in the development and use of the inventory. The…

Robust Inventory System Optimization Based on Simulation and Multiple Criteria Decision Making

Directory of Open Access Journals (Sweden)

Ahmad Mortazavi

2014-01-01

Full Text Available Inventory management in retailers is difficult and complex decision making process which is related to the conflict criteria, also existence of cyclic changes and trend in demand is inevitable in many industries. In this paper, simulation modeling is considered as efficient tool for modeling of retailer multiproduct inventory system. For simulation model optimization, a novel multicriteria and robust surrogate model is designed based on multiple attribute decision making (MADM method, design of experiments (DOE, and principal component analysis (PCA. This approach as a main contribution of this paper, provides a framework for robust multiple criteria decision making under uncertainty.

Construct Validation of the Physics Metacognition Inventory

Science.gov (United States)

Taasoobshirazi, Gita; Farley, John

2013-02-01

The 24-item Physics Metacognition Inventory was developed to measure physics students' metacognition for problem solving. Items were classified into eight subcomponents subsumed under two broader components: knowledge of cognition and regulation of cognition. The students' scores on the inventory were found to be reliable and related to students' physics motivation and physics grade. An exploratory factor analysis provided evidence of construct validity, revealing six components of students' metacognition when solving physics problems including: knowledge of cognition, planning, monitoring, evaluation, debugging, and information management. Although women and men differed on the components, they had equivalent overall metacognition for problem solving. The implications of these findings for future research are discussed.

A Production Model for Deteriorating Inventory Items with Production Disruptions

OpenAIRE

Yong He; Ju He

2010-01-01

Disruption management has recently become an active area of research. In this study, an extension is made to consider the fact that some products may deteriorate during storage. A production-inventory model for deteriorating items with production disruptions is developed. Then the optimal production and inventory plans are provided, so that the manufacturer can reduce the loss caused by disruptions. Finally, a numerical example is used to illustrate the model.

Conducting Classroom Design Research with Teachers

Science.gov (United States)

Stephan, Michelle. L.

2015-01-01

Design research is usually motivated by university members with experience and interest in building theory and instructional designs in collaboration with one teacher. Typically, the teacher is considered as a member of the research team, with the primary responsibility of implementing instruction. However, in this chapter, I describe a Classroom…

5th International Conference on Research into Design

CERN Document Server

2015-01-01

This book showcases cutting-edge research papers from the 5th International Conference on Research into Design – the largest in India in this area – written by eminent researchers from across the world on design process, technologies, methods and tools, and their impact on innovation, for supporting design across boundaries. The special features of the book are the variety of insights into the product and system innovation process, and the host of methods and tools from all major areas of design research for the enhancement of the innovation process. The main benefit of the book for researchers in various areas of design and innovation are access to the latest quality research in this area, with the largest collection of research from India. For practitioners and educators, it is exposure to an empirically validated suite of theories, models, methods and tools that can be taught and practiced for design-led innovation.

The Teaching Practices Inventory: A New Tool for Characterizing College and University Teaching in Mathematics and Science

Science.gov (United States)

Gilbert, Sarah

2014-01-01

We have created an inventory to characterize the teaching practices used in science and mathematics courses. This inventory can aid instructors and departments in reflecting on their teaching. It has been tested with several hundred university instructors and courses from mathematics and four science disciplines. Most instructors complete the inventory in 10 min or less, and the results allow meaningful comparisons of the teaching used for the different courses and instructors within a department and across different departments. We also show how the inventory results can be used to gauge the extent of use of research-based teaching practices, and we illustrate this with the inventory results for five departments. These results show the high degree of discrimination provided by the inventory, as well as its effectiveness in tracking the increase in the use of research-based teaching practices. PMID:25185237

Optimal fuel inventory strategies

International Nuclear Information System (INIS)

Caspary, P.J.; Hollibaugh, J.B.; Licklider, P.L.; Patel, K.P.

1990-01-01

In an effort to maintain their competitive edge, most utilities are reevaluating many of their conventional practices and policies in an effort to further minimize customer revenue requirements without sacrificing system reliability. Over the past several years, Illinois Power has been rethinking its traditional fuel inventory strategies, recognizing that coal supplies are competitive and plentiful and that carrying charges on inventory are expensive. To help the Company achieve one of its strategic corporate goals, an optimal fuel inventory study was performed for its five major coal-fired generating stations. The purpose of this paper is to briefly describe Illinois Power's system and past practices concerning coal inventories, highlight the analytical process behind the optimal fuel inventory study, and discuss some of the recent experiences affecting coal deliveries and economic dispatch

Using Network Science to Support Design Research

DEFF Research Database (Denmark)

Parraguez Ruiz, Pedro; Maier, Anja

2016-01-01

and societal impact. This chapter contributes to the use of network science in empirical studies of design organisations. It focuses on introducing a network-based perspective on the design process and in particular on making use of network science to support design research and practice. The main contribution...... of this chapter is an overview of the methodological challenges and core decision points when embarking on network-based design research, namely defining the overall research purpose and selecting network features. We furthermore highlight the potential for using archival data, the opportunities for navigating...

6th International Conference on Research into Design

CERN Document Server

Chakrabarti, Debkumar; ICoRD 2017; Research into design for communities

2017-01-01

This book showcases cutting-edge research papers from the 6th International Conference on Research into Design (ICoRD 2017) – the largest in India in this area – written by eminent researchers from across the world on design process, technologies, methods and tools, and their impact on innovation, for supporting design for communities. While design traditionally focused on the development of products for the individual, the emerging consensus on working towards a more sustainable world demands greater attention to designing for and with communities, so as to promote their sustenance and harmony - within each community and across communities. The special features of the book are the insights into the product and system innovation process, and the host of methods and tools from all major areas of design research for the enhancement of the innovation process. The main benefit of the book for researchers in various areas of design and innovation are access to the latest quality research in this area, with the...

Controlling Inventory: Real-World Mathematical Modeling

Science.gov (United States)

Edwards, Thomas G.; Özgün-Koca, S. Asli; Chelst, Kenneth R.

2013-01-01

Amazon, Walmart, and other large-scale retailers owe their success partly to efficient inventory management. For such firms, holding too little inventory risks losing sales, whereas holding idle inventory wastes money. Therefore profits hinge on the inventory level chosen. In this activity, students investigate a simplified inventory-control…

A users guide to the radioactive waste inventory program 'DATABASE'

International Nuclear Information System (INIS)

Prince, G.A.; Tymons, B.J.

1984-09-01

The program computes an inventory of radioactive waste accumulation in a form such that a variety of interrogation, collation and summary functions can be used to access the stored information. Database is designed to be used online, that is the user will communicate with it at a computer terminal, and the program will display the result of each enquiry. It has the potential to automate much of the searching and adding up which was involved in compiling and using waste inventories in the past. (author)

RESEARCH UTILIZATION IN THE DESIGN DECISION MAKING PROCESS

Directory of Open Access Journals (Sweden)

Amy Huber

2016-04-01

Full Text Available This article summarizes findings from a national survey of interior design practitioners in the United States (N=366.  The study explored interior design practitioners' current preferences for conducting project research including: activities conducted and sources used, attraction to and recall from sources, and ideas for communicating research findings. Responses suggest that interior designers do value research, yet have little time to utilize research. While cross-tabulation analyses indicate no major differences in research activities between the study’s demographic groups, collectively, only 12% of the sample indicated they utilized academic journals and, at times, even incorrectly identified those sources. Open-ended responses allowed designers to offer ideas for communicating research and four key themes emerged, including: topic selection and relevancy, ideas for new dissemination methods, ideas for presentation style, and perceptions of the written language used.  It is hoped that this study’s findings may help design researchers better communicate their own findings to design practitioners.

Radioactive material inventory control at a waste characterization facility

International Nuclear Information System (INIS)

Yong, L.K.; Chapman, J.A.; Schultz, F.J.

1996-01-01

Due to the recent introduction of more stringent Department of Energy (DOE) regulations and requirements pertaining to nuclear and criticality safety, the control of radioactive material inventory has emerged as an important facet of operations at DOE nuclear facilities. In order to comply with nuclear safety regulations and nuclear criticality requirements, radioactive material inventories at each nuclear facility have to be maintained below limits specified for the facility in its safety authorization basis documentation. Exceeding these radioactive material limits constitutes a breach of the facility's nuclear and criticality safety envelope and could potentially result in an accident, cause a shut-down of the facility, and bring about imminent regulatory repercussions. The practice of maintaining control of radioactive material, especially sealed and unsealed sources, is commonplace and widely implemented; however, the requirement to track the entire radioactivity inventory at each nuclear facility for the purpose of ensuring nuclear safety is a new development. To meet the new requirements, the Applied Radiation Measurements Department at Oak Ridge National Laboratory (ORNL) has developed an information system, called the open-quotes Radioactive Material Inventory Systemclose quotes (RMIS), to track the radioactive material inventory at an ORNL facility, the Waste Examination and Assay Facility (WEAF). The operations at WEAF, which revolve around the nondestructive assay and nondestructive examination of waste and related research and development activities, results in an ever-changing radioactive material inventory. Waste packages and radioactive sources are constantly being brought in or taken out of the facility; hence, use of the RMIS is necessary to ensure that the radioactive material inventory limits are not exceeded

On studying narcissism in personality inventories rather than the Narcissistic Personality Inventory: Reply to Miller and Lynam (2017).

Science.gov (United States)

Fossati, Andrea; Somma, Antonella; Borroni, Serena; Markon, Kristian E

2017-11-01

Miller and Lynam's (2017) commentary proved to be very helpful in clarifying that r alerting-CV and r contrast-CV coefficient values reported in our study indicated that the Narcissistic Personality Inventory (NPI) yielded a trait profile much more closely aligned with expert ratings of Diagnostic and Statistical Manual of Mental Disorders (4th edition; DSM-IV) narcissistic personality disorder (NPD) than did other measures. The commentary gives us the opportunity to make it clear that our study was designed to demonstrate the clinical usefulness of Personality Inventory for DSM-5 (PID-5) domain and trait scales in profiling pathological narcissism. Thus, demonstrating the superiority/inferiority of the Pathological Narcissism Inventory (PNI) over the NPI was not among the aims of our study. The publication of the commentary also gives us the opportunity to clarify the reasons why we think that the interpretation of the r alerting-CV and r contrast-CV coefficients deserves some cautions. As a final remark, we think that the time has come to move from personality disorder classifications based on "clinical wisdom" to a redefinition of personality pathology in terms of systems of traits. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

ABC Analysis for Inventory Management: Bridging the Gap between Research and Classroom

Science.gov (United States)

Ravinder, Handanhal; Misra, Ram B.

2014-01-01

ABC analysis is a well-established categorization technique based on the Pareto Principle for determining which items should get priority in the management of a company's inventory. In discussing this topic, today's operations management and supply chain textbooks focus on dollar volume as the sole criterion for performing the categorization. The…

Comparison of Kalman filters in combining panel data from the annual inventory system of the South Korea National Forest Inventory

Science.gov (United States)

Tzeng Yih Lam; Raymond L. Czaplewski; Jong Su Yim; Kyeong Hak Lee; Sung Ho Kim; Rae Hyun Kim

2013-01-01

National Forest Inventories (NFIs) serve a primary purpose of providing crucial information for formulating national forest policy, environmental planning and reporting to international processes (Tomppo and others 2010). Pressure for timely and reliable forestry statistics urges countries to put a NFI in place or to consider alternative designs. Some countries, for...

21 CFR 1304.11 - Inventory requirements.

Science.gov (United States)

2010-04-01

... the inventory of the registered location to which they are subject to control or to which the person... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Inventory requirements. 1304.11 Section 1304.11... REGISTRANTS Inventory Requirements § 1304.11 Inventory requirements. (a) General requirements. Each inventory...

Designing Effective Undergraduate Research Experiences

Science.gov (United States)

Severson, S.

2010-12-01

I present a model for designing student research internships that is informed by the best practices of the Center for Adaptive Optics (CfAO) Professional Development Program. The dual strands of the CfAO education program include: the preparation of early-career scientists and engineers in effective teaching; and changing the learning experiences of students (e.g., undergraduate interns) through inquiry-based "teaching laboratories." This paper will focus on the carry-over of these ideas into the design of laboratory research internships such as the CfAO Mainland internship program as well as NSF REU (Research Experiences for Undergraduates) and senior-thesis or "capstone" research programs. Key ideas in maximizing student learning outcomes and generating productive research during internships include: defining explicit content, scientific process, and attitudinal goals for the project; assessment of student prior knowledge and experience, then following up with formative assessment throughout the project; setting reasonable goals with timetables and addressing motivation; and giving students ownership of the research by implementing aspects of the inquiry process within the internship.

Schematic representation of case study research designs.

Science.gov (United States)

Rosenberg, John P; Yates, Patsy M

2007-11-01

The paper is a report of a study to demonstrate how the use of schematics can provide procedural clarity and promote rigour in the conduct of case study research. Case study research is a methodologically flexible approach to research design that focuses on a particular case - whether an individual, a collective or a phenomenon of interest. It is known as the 'study of the particular' for its thorough investigation of particular, real-life situations and is gaining increased attention in nursing and social research. However, the methodological flexibility it offers can leave the novice researcher uncertain of suitable procedural steps required to ensure methodological rigour. This article provides a real example of a case study research design that utilizes schematic representation drawn from a doctoral study of the integration of health promotion principles and practices into a palliative care organization. The issues discussed are: (1) the definition and application of case study research design; (2) the application of schematics in research; (3) the procedural steps and their contribution to the maintenance of rigour; and (4) the benefits and risks of schematics in case study research. The inclusion of visual representations of design with accompanying explanatory text is recommended in reporting case study research methods.

Inventory of North-West European algae initiatives

NARCIS (Netherlands)

Spruijt, J.

2015-01-01

In 2012 an inventory of North-West European (NWE) algae initiatives was carried out to get an impression of the market and research activities on algae production and refinery, especially for bioenergy purposes. A questionnaire was developed that would provide the EnAlgae project with information on

Gaining a Competitive Edge through Action Design Research

Science.gov (United States)

Alexa, L.; Alexa, M.; Avasilcăi, S.

2016-08-01

The current business environment is characterized by increased competition and highly innovative approach, in order to create products and services to better respond to the costumers’ needs and expectations. In this specific context, the research approaches need to be more flexible and business oriented and so, throughout the paper we have used a research method that combines design research and action research, named Action Design Research which is a research method used for generating prescriptive design knowledge through building and evaluating IT artifacts in an organizational setting [1]. Following the Action Design Research stages and principles: problem identification, building, intervention and evaluation, reflection and learning and formalization of learning, the research team has developed an online instrument used to actively involve the consumer in the product development process, in order to generate a better consumers insight regarding their needs and desires and to design and/or adjust the product accordingly. The customer engagement IT tool created and tested by using Action Design Research, E-PICUS, has been developed within the framework of the research project „E-solutions for innovation through customer pro-active involvement in value creation to increase organisational competitiveness (E-PICUS)”, PN- II-PT-PCCA-2013-4-1811, currently undergoing.

Procedure for taking physical inventories

International Nuclear Information System (INIS)

Boston, R.A.

1984-01-01

Physical inventories are taken periodically to meet Company, State and IAEA requirements. Those physical inventories may be verified by IAEA and/or State inspectors. This presentation describes in an introductory but detailed manner the approaches and procedures used in planning, preparing, conducting, reconciling and reporting physical inventories for the Model Plant. Physical inventories are taken for plant accounting purposes to provide an accurate basis for starting and closing the plant material balance. Physical inventories are also taken for safeguards purposes to provide positive assurance that the nuclear materials of concern are indeed present and accounted for

CONSTRUCTION AND PARTIAL VALIDATION OF AN ANIMAL USE INVENTORY

Directory of Open Access Journals (Sweden)

Donald I. Templer

2013-12-01

Full Text Available A 78-item Animal Use Inventory was constructed. Previous animal attitude scales have centered on affection, bonding, companion animal ownership, animal-human continuity, and general attitudes toward animals, but not use of animals. The present inventory has six scales: Sports and Entertainment, Hunting, Working and Service, Research, Fur, and Loving and Affection. Men scored higher on the Hunting, Research, Entertainment, and Service scales. National Rifle Association members scored higher than animal protection society members on the Hunting and Fur scales. In general, the scales correlated positively with each other but negatively with the Loving and Affection scale. Nevertheless, caution was urged because of the unimpressive Cronbach’s alphas on some of the scales. Further development is recommended.

Energy Education Materials Inventory

Energy Technology Data Exchange (ETDEWEB)

1979-08-01

The two volumes of the Energy Education Materials Inventory (EEMI) comprise an annotated bibliography of widely available energy education materials and reference sources. This systematic listing is designed to provide a source book which will facilitate access to these educational resources and hasten the inclusion of energy-focused learning experiences in kindergarten through grade twelve. EEMI Volume II expands Volume I and contains items that have become available since its completion in May, 1976. The inventory consists of three major parts. A core section entitled Media contains titles and descriptive information on educational materials, categorized according to medium. The other two major sections - Grade Level and Subject - are cross indexes of the items for which citations appear in the Media Section. These contain titles categorized according to grade level and subject and show the page numbers of the full citations. The general subject area covered includes the following: alternative energy sources (wood, fuel from organic wastes, geothermal energy, nuclear power, solar energy, tidal power, wind energy); energy conservation, consumption, and utilization; energy policy and legislation, environmental/social aspects of energy technology; and fossil fuels (coal, natural gas, petroleum). (RWR)

Application of the Modified Erikson Psychosocial Stage Inventory: 25 Years in Review.

Science.gov (United States)

Darling-Fisher, Cynthia S

2018-04-01

The Modified Erikson Psychosocial Stage Inventory (MEPSI) is an 80-item, comprehensive measure of psychosocial development based on Erikson's theory with published reliability and validity data. Although designed as a comprehensive measure, some researchers have used individual subscales for specific developmental stages as a measure; however, these subscale reliability scores have not been generally shared. This article reviewed the literature to evaluate the use of the MEPSI: the major research questions, samples/populations studied, and individual subscale and total reliability and validity data. In total, 16 research articles (1990-2011) and 28 Dissertations/Theses (1991-2016) from nursing, social work, psychology, criminal justice, and religious studies met criteria. Results support the MEPSI's global reliability (aggregate scores ranged .89-.99) and validity in terms of consistent patterns of changes observed in the predicted direction. Reliability and validity data for individual subscales were more variable. Limitations of the tool and recommendations for possible revision and future research are addressed.

Depth of Field: Discursive design research through film

Directory of Open Access Journals (Sweden)

Timo Arnall

2010-07-01

Full Text Available This article is about the role of film in interaction and product design research with technology, and the use of film in exploring and explaining emerging technologies in multiple contexts. We have engaged in a reflective design research process that uses graphical, audiovisual, and time-based media as a tool, a material and a communicative artefact that enables us to approach complex, obscure and often invisible emerging technologies. We give a discursive account of how film has played an intricate role in our design research practice, from revealing the materiality of invisible wireless technology, to explaining complex technical prototypes, to communicating to a public audience through online films that may fold broader social and cultural discourses back into our design research process. We conclude by elaborating on discursive design approaches to research that use film as a reflective and communicative medium that allows for design research to operate within a social and cultural frame.

FIR 1 TRIGA activity inventories for decommissioning planning

International Nuclear Information System (INIS)

Raety, Antti; Kotiluoto, Petri

2016-01-01

The objective of the study has been to estimate the residual activity in the decommissioning waste of TRIGA Mark II type research reactor FiR 1 in Finland. Neutron flux distributions were calculated with Monte Carlo code MCNP. These were used in ORIGEN-S point-depletion code to calculate the neutron induced activity of materials at different time points by modelling the irradiation history and radioactive decay. The knowledge of radioactive inventory of irradiated materials is important in the planning of the decommissioning activities and is essential for predicting the radiological impact to personnel and environment. Decommissioning waste consists mainly of ordinary concrete, aluminium, steel and graphite parts. Results include uncertainties due to assumptions on material compositions and possible diffusion of gaseous nuclides. Comparison to activity inventory estimates of two other decommissioned research reactors is also presented. (authors)

Quasi experimental designs in pharmacist intervention research.

Science.gov (United States)

Krass, Ines

2016-06-01

Background In the field of pharmacist intervention research it is often difficult to conform to the rigorous requirements of the "true experimental" models, especially the requirement of randomization. When randomization is not feasible, a practice based researcher can choose from a range of "quasi-experimental designs" i.e., non-randomised and at time non controlled. Objective The aim of this article was to provide an overview of quasi-experimental designs, discuss their strengths and weaknesses and to investigate their application in pharmacist intervention research over the previous decade. Results In the literature quasi experimental studies may be classified into five broad categories: quasi-experimental design without control groups; quasi-experimental design that use control groups with no pre-test; quasi-experimental design that use control groups and pre-tests; interrupted time series and stepped wedge designs. Quasi-experimental study design has consistently featured in the evolution of pharmacist intervention research. The most commonly applied of all quasi experimental designs in the practice based research literature are the one group pre-post-test design and the non-equivalent control group design i.e., (untreated control group with dependent pre-tests and post-tests) and have been used to test the impact of pharmacist interventions in general medications management as well as in specific disease states. Conclusion Quasi experimental studies have a role to play as proof of concept, in the pilot phases of interventions when testing different intervention components, especially in complex interventions. They serve to develop an understanding of possible intervention effects: while in isolation they yield weak evidence of clinical efficacy, taken collectively, they help build a body of evidence in support of the value of pharmacist interventions across different practice settings and countries. However, when a traditional RCT is not feasible for

Inventory extension at the Nuclear Materials Storage Facility

International Nuclear Information System (INIS)

Stanbro, W.D.; Longmire, V.; Olinger, C.T.; Argo, P.E.

1996-09-01

The planned renovation of the Nuclear Material Storage Facility (NMSF) at Los Alamos National Laboratory will be a significant addition to the plutonium storage capacity of the nuclear weapons complex. However, the utility of the facility may be impaired by an overly conservative approach to performing inventories of material in storage. This report examines options for taking advantage of provisions in Department of Energy orders to extend the time between inventories. These extensions are based on a combination of modern surveillance technology, facility design features, and revised operational procedures. The report also addresses the possibility that NMSF could be the site of some form of international inspection as part of the US arms control and nonproliferation policy

Transmutation and inventory analysis in an ATW molten salt system

Energy Technology Data Exchange (ETDEWEB)

Sisolak, J.E.; Truebenbach, M.T.; Henderson, D.L. [Univ. of Wisconsin, Madison, WI (United States)

1995-10-01

As an extension of earlier work to determine the equilibrium state of an ATW molten salt, power producing, reactor/transmuter, the WAIT code provides a time dependent view of material inventories and reactor parameters. By considering several cases, the authors infer that devices of this type do not reach equilibrium for dozens of years, and that equilibrium design calculations are inapplicable over most of the reactor life. Fissile inventory and k{sub eff} both vary by factors of 1.5 or more between reactor startup and ultimate convergence to equilibrium.

Implementing Clinical Research Using Factorial Designs: A Primer.

Science.gov (United States)

Baker, Timothy B; Smith, Stevens S; Bolt, Daniel M; Loh, Wei-Yin; Mermelstein, Robin; Fiore, Michael C; Piper, Megan E; Collins, Linda M

2017-07-01

Factorial experiments have rarely been used in the development or evaluation of clinical interventions. However, factorial designs offer advantages over randomized controlled trial designs, the latter being much more frequently used in such research. Factorial designs are highly efficient (permitting evaluation of multiple intervention components with good statistical power) and present the opportunity to detect interactions amongst intervention components. Such advantages have led methodologists to advocate for the greater use of factorial designs in research on clinical interventions (Collins, Dziak, & Li, 2009). However, researchers considering the use of such designs in clinical research face a series of choices that have consequential implications for the interpretability and value of the experimental results. These choices include: whether to use a factorial design, selection of the number and type of factors to include, how to address the compatibility of the different factors included, whether and how to avoid confounds between the type and number of interventions a participant receives, and how to interpret interactions. The use of factorial designs in clinical intervention research poses choices that differ from those typically considered in randomized clinical trial designs. However, the great information yield of the former encourages clinical researchers' increased and careful execution of such designs. Copyright © 2017. Published by Elsevier Ltd.

Transit asset inventory development and integration : asset management methodology/condition assessment methodology research.

Science.gov (United States)

2012-09-01

This report summarizes the results of a 13-month effort by CodeRed Business Solutions (CRBS) to consider how urban rail transit agencies can leverage data within their maintenance management systems to build asset inventories for higher-level analysi...

Making Theory Come Alive through Practice-based Design Research

DEFF Research Database (Denmark)

Markussen, Thomas; Knutz, Eva; Rind Christensen, Poul

The aim of this paper is to demonstrate how practice-based design research is able not only to challenge, but also to push toward further development of some of the basic assumpstions in emotion theories as used within design research. In so doing, we wish to increase knolwedge on a central...... epistemological question for design research, namely how practice-based design research can be a vehicle for the construction of new theory for design research....

Enhancing Chemical Inventory Management in Laboratory through a Mobile-Based QR Code Tag

Science.gov (United States)

Shukran, M. A. M.; Ishak, M. S.; Abdullah, M. N.

2017-08-01

The demand for a greater inventory management system which can provide a lot of useful information from a single scan has made laboratory inventory management using barcode technology more difficult. Since the barcode technology lacks the ability to overcome the problem and is not capable of providing information needed to manage the chemicals in the laboratory, thus employing a QR code technology is the best solution. In this research, the main idea is to develop a standalone application running with its own database that is periodically synchronized with the inventory software hosted by the computer and connected to a specialized network as well. The first process required to establish this centralized system is to determine all inventory available in the chemical laboratory by referring to the documented data in order to develop the database. Several customization and enhancement were made to the open source QR code technology to ensure the developed application is dedicated for its main purposes. As the end of the research, it was proven that the system is able to track the position of all inventory and showing real time information about the scanned chemical labels. This paper intends to give an overview about the QR tag inventory system that was developed and its implementation at the National Defence University of Malaysia’s (NDUM) chemical laboratory.

Design of a new research reactor : 1st year conceptual design

International Nuclear Information System (INIS)

Park, Cheol; Lee, B. C.; Chae, H. T.

2004-01-01

A new research reactor model satisfying the strengthened regulatory environments and the changed circumstances around nuclear society should be prepared for the domestic and international demand of research reactor. This can also lead to the improvement of technologies and fostering manpower obtained during the construction and the operation of HANARO. In this aspect, this study has been launched and the 1st year conceptual design has been carried out in 2003. The major tasks performed at the first year of conceptual design stage are as follows; Establishments of general design requirements of research reactors and experimental facilities, Establishment of fuel and reactor core concepts, Preliminary analysis of reactor physics and thermal-hydraulics for conceptual core, Conceptual design of reactor structure and major systems, International cooperation to establish foundations for exporting

Validating the Riverside Acculturation Stress Inventory with Asian Americans

Science.gov (United States)

Miller, Matthew J.; Kim, Jungeun; Benet-Martinez, Veronica

2011-01-01

An emerging body of empirical research highlights the impact of acculturative stress in the lives of culturally diverse populations. Therefore, to facilitate future research in this area, we conducted 3 studies to examine the psychometric properties of the Riverside Acculturation Stress Inventory (RASI; Benet-Martinez & Haritatos, 2005) and its 5…

Evaluating The Performance of Inventory Management The Production Division of PT. Tiga Serangkai Surakarta as a Case Study

Directory of Open Access Journals (Sweden)

Sri Maryati

2016-04-01

Full Text Available This research aims to understand the process of production and to analyze the performance of inventory system on production division of PT. Tiga Serangkai. The data has been gathered from direct observation of the process production and warehouse and the interview with the production employee, the employee of warehouse division, supervisor of purchasing and finance manager. This research demonstrates that inventory system performance of PT. Tiga Serangkai Surakarta can be optimized through the determination of inventory policy, applying a model minimum and maximum inventory that considers the safety stock in accordance with service level plan, implementing model Reorder Point (ROP which can be used as guidelines in charging supply back, and applying the model economic ordering quantity. In doing so, they can save the cost of inventory.   Keywords: inventory management, economic order quantity (EOQ, PT. Tiga Serangkai

Leveraging Failure in Design Research

Science.gov (United States)

Lobato, Joanne; Walters, C. David; Hohensee, Charles; Gruver, John; Diamond, Jaime Marie

2015-01-01

Even in the resource-rich, more ideal conditions of many design-based classroom interventions, unexpected events can lead to disappointing results in student learning. However, if later iterations in a design research study are more successful, the previous failures can provide opportunities for comparisons to reveal subtle differences in…

Building a Cohesive Body of Design Knowledge: Developments from a Design Science Research Perspective

DEFF Research Database (Denmark)

Cash, Philip; Piirainen, Kalle A.

2015-01-01

researchers have identified difficulties in building on past works, and combining insights from across the field. This work starts to dissolve some of these issues by drawing on Design Science Research to propose an integrated approach for the development of design research knowledge, coupled with pragmatic......Design is an extremely diverse field where there has been widespread debate on how to build a cohesive body of scientific knowledge. To date, no satisfactory proposition has been adopted across the field – hampering scientific development. Without this basis for bringing research together design...... advice for design researchers. This delivers a number of implications for researchers as well as for the field as a whole....

Developing a Model for Optimizing Inventory of Repairable Items at Single Operating Base

OpenAIRE

Le, Tin

2016-01-01

The use of EOQ model in inventory management is popular. However, EOQ models has many disadvantages, especially, when the model is applied to manage repairable items. In order to deal with high-cost and repairable items, Craig C. Sherbrooke introduced a model in his book “Optimal Inventory Modeling of Systems: Multi-Echelon Techniques”. The research focus is to implement and develop a program to execute the single-site in-ventory model for repairable items. The model helps to significantl...

Using a Design Science Perspective to Understand a Complex Design-Based Research Process

DEFF Research Database (Denmark)

Bækgaard, Lars

2012-01-01

The purpose of the paper is to demonstrate how a design science perspective can be used to describe and understand a set of related design-based research processes. We describe and analyze a case study in a manner that is inspired by design science. The case study involves the design of modeling......-based research processes. And we argue that a design science perspective may be useful for both researchers and practitioners....... tools and the redesign of an information service in a library. We use a set of guidelines from a design science perspective to organize the description and analysis of the case study. By doing this we demonstrate the usefulness of design science as an analytical tool for understanding related design...

An inventory of publications on electronic medical records revisited.

Science.gov (United States)

Moorman, P W; Schuemie, M J; van der Lei, J

2009-01-01

In this short review we provide an update of our earlier inventories of publications indexed in MedLine with the MeSH term 'Medical Records Systems, Computerized'. We retrieved and analyzed all references to English articles published before January 1, 2008, and indexed in PubMed with the MeSH term 'Medical Records Systems, Computerized'. We retrieved a total of 11,924 publications, of which 3937 (33%) appeared in a journal with an impact factor. Since 2002 the number of yearly publications, and the number of journals in which those publications appeared, increased. A cluster analysis revealed three clusters: an organizational issues cluster, a technically oriented cluster and a cluster about order-entry and research. Although our previous inventory in 2003 suggested a constant yearly production of publications on electronic medical records since 1998, the current inventory shows another rise in production since 2002. In addition, many new journals and countries have shown interest during the last five years. In the last 15 years, interest in organizational issues remained fairly constant, order entry and research with systems gained attention, while interest in technical issues relatively decreased.

Development of the inventory for existing and future radioactive wastes in Switzerland. ISRAM and MIRAM

International Nuclear Information System (INIS)

Maxeiner, Harald; Vespa, Marika; Volmert, Ben; Pantelias, Manuel; Caruso, Stefano; Mueller, Tom

2013-01-01

Radioactive waste in Switzerland arises from the 5 nuclear power plants and from the use of radioactive materials in medicine, industry and research. The waste has to be conditioned for interim storage and later deep geological disposal, which requires extensive research and development work. The production of waste packages is supported by quality assurance checks and characterisation and inventorying programmes. The management of all produced waste packages together with the associated key data is done with the computer-based 'Information System for Radioactive Materials (ISRAM)'. This also ensures complete tracking of all existing waste packages from their production to their final disposal in a deep geological repository. For planning purposes and for design studies for the planned repositories in Switzerland, waste that will arise in the future also has to be taken into consideration. Using ISRAM as a basis, a 'Model Inventory for Radioactive Materials (MIRAM)' was also developed; this contains all the key data required for safety analysis and facility planning. Together, these tools (ISRAM und MIRAM) form the basis for complete and comprehensive documentation and tracking of radioactive wastes up to the time of their geological disposal. (orig.)

Using Spreadsheet Modeling to Teach Exchange Curves (Optimal Policy Curves) in Inventory Management

Science.gov (United States)

Strakos, Joshua K.

2016-01-01

Inventory management is widely researched and the topic is taught in business programs across the spectrum of operations and supply chain management. However, the concepts are notoriously difficult for students to practice once they finish school and become managers responsible for inventory control. This article explains the structure and details…

Critical Issues in Research Design in Action Research in an SME Development Context

Science.gov (United States)

McGrath, Helen; O'Toole, Thomas

2012-01-01

Purpose: The main aim of this paper is to develop guidelines on the critical issues to consider in research design in an action research (AR) environment for SME network capability development. Design/methodology/approach: The issues in research design for AR studies are developed from the authors' experience in running learning sets but, in…

Improving Aviation Depot Level Repairable (AVDLR) Inventory and Repair Management

National Research Council Canada - National Science Library

Baird, Dennis

1997-01-01

.... Additionally, research was conducted to document the management process for determining repair requirements at the Naval Inventory Control Point Philadelphia and how those requirements are accepted...

Design science research as research approach in doctoral studies

CSIR Research Space (South Africa)

Kotzé, P

2015-08-01

Full Text Available Since the use of design science research (DSR) gained momentum as a research approach in information systems (IS), the adoption of a DSR approach in postgraduate studies became more acceptable. This paper reflects on a study to investigate how a...

Validation of Schema Coping Inventory and Schema Mode Inventory in Adolescents

NARCIS (Netherlands)

van Wijk-Herbrink, M.F.; Roelofs, J.; Broers, N.J.; Rijkeboer, M.M.; Arntz, A.; Bernstein, D.P.

2018-01-01

This study investigated whether the schema therapy constructs of schema coping and schema modes have validity in adolescents. We examined the validity and reliability of the Schema Coping Inventory (SCI) and an 80-item version of the Schema Mode Inventory (SMI) in a mixed sample of adolescents.

The Self-Report Family Inventory: An Exploratory Factor Analysis

Science.gov (United States)

Goodrich, Kristopher M.; Selig, James P.; Trahan, Don P., Jr.

2012-01-01

Researchers explored the factor structure of the Self-Report Family Inventory with a sample of heterosexual parents who have a son or daughter who self-identifies as lesbian, gay, or bisexual. Results suggest that a two-factor solution is appropriate. Research and clinical implications are offered. (Contains 1 figure and 2 tables.)

A critical review of objective personality inventories with sex offenders.

Science.gov (United States)

Davis, Karen M; Archer, Robert P

2010-12-01

This review provides a critical analysis of the ability of multiscale inventories to distinguish between sex offender and nonoffender control groups, as well as to discriminate sex offenders from other types of offenders. In addition to expanding upon previous reviews that examined the utility of the Minnesota Multiphasic Personality Inventory (MMPI) with this population (e.g., Levin & Stava, 1987), the current review included studies that utilized other multiscale inventories commonly used in forensic practice (i.e., MMPI-2, Millon Clinical Multiaxial Inventory-III [MCMI-III], Personality Assessment Inventory) and, when possible, provides effect sizes to evaluate group differences. Based on the review, the various forms of the MMPI and MCMI are clearly the most widely used instruments in sex offender populations. The MMPI Pd scale has shown moderate to large effect sizes when distinguishing between sex offender and nonsex offender groups, but this relationship may be reflective of antisocial behavior in general rather than traits specific to sex offenders. Recommendations to standardize future research classification strategies and more effectively utilize these instruments when assessing sex offenders are also provided. © 2010 Wiley Periodicals, Inc.

What is it that is being designed in design-based research and how does it qualify as research?

DEFF Research Database (Denmark)

Gundersen, Peter Bukovica; Jørnø, Rasmus Leth Vergmann

2015-01-01

This article performs a comparative reading across a selection of seminal articles on Design based research in order to draw out and clarify key concepts that frame the approach. The article is a contribution to the ongoing discussion of how Design Based Research is or becomes a rigorous science....

Social Media Resources for Participative Design Research

OpenAIRE

Qaed, Fatema; Briggs, Jo; Cockton, Gilbert

2016-01-01

We present our experiences of novel value from online social media for Participative Design (PD) research. We describe how particular social media (e.g. Facebook, Pinterest, WhatsApp and Twitter) were used during a five-year project on learning space design by the researcher and interested teachers across all research phases (contextual review, user studies, PD action research). Social media were used to source and share comments, photographs and video documentation, supporting participation ...

How to Construct a Mixed Methods Research Design.

Science.gov (United States)

Schoonenboom, Judith; Johnson, R Burke

2017-01-01

This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), point of integration, typological versus interactive design approaches, planned versus emergent design, and design complexity. There also are multiple secondary dimensions that need to be considered during the design process. We explain ten secondary dimensions of design to be considered for each research study. We also provide two case studies showing how the mixed designs were constructed.

U.S. Airport Greenhouse Gas Emissions Inventories: State of the Practice and Recommendations for Airports.

Science.gov (United States)

2016-03-01

This document presents highlights from five research reports on airport greenhouse gas (GHG) emissions inventories. It presents the most salient findings for policy makers and U.S. airports seeking to better understand and inventory airport GHG emiss...

The West Haven-Yale Multidimensional Pain Inventory (WHYMPI).

Science.gov (United States)

Kerns, R D; Turk, D C; Rudy, T E

1985-12-01

The complexity of chronic pain has represented a major dilemma for clinical researchers interested in the reliable and valid assessment of the problem and the evaluation of treatment approaches. The West Haven-Yale Multidimensional Pain Inventory (WHYMPI) was developed in order to fill a widely recognized void in the assessment of clinical pain. Assets of the inventory are its brevity and clarity, its foundation in contemporary psychological theory, its multidimensional focus, and its strong psychometric properties. Three parts of the inventory, comprised of 12 scales, examine the impact of pain on the patients' lives, the responses of others to the patients' communications of pain, and the extent to which patients participate in common daily activities. The instrument is recommended for use in conjunction with behavioral and psychophysiological assessment strategies in the evaluation of chronic pain patients in clinical settings. The utility of the WHYMPI in empirical investigations of chronic pain is also discussed.

[A German version of the Eating Disorder Inventory EDI-2].

Science.gov (United States)

Thiel, A; Jacobi, C; Horstmann, S; Paul, T; Nutzinger, D O; Schüssler, G

1997-01-01

The paper presents a German version of the second revised edition of the Eating Disorder Inventory EDI-2 (Garner 1991). The EDI-2 is a self-rating inventory (self-report measure) with 91 items and 11 subscales designed for the assessment of attitudinal and behavioural dimensions relevant to anorexia and bulimia nervosa. It consists of the eight original subscales: drive for thinness, bulimia, body dissatisfaction, ineffectiveness, perfectionism, interpersonal distrust, interoception and maturity fears, and the three new subscales: asceticism, impulse regulation and social insecurity. The German EDI-2 was given to 71 patients with anorexia or bulimia nervosa, 30 patients with binge eating disorder, a control group of 186 women and a further control group of 102 men. In comparison to the female control group, patient groups showed significantly elevated means on all subscales. Item analysis revealed sufficient internal consistencies for all subscales except subscale 9 (asceticism) with Cronbachs alpha ranging from 0.58 to 0.90. Twelve of the 91 items showed poor item total scale correlations below 0.40. Factor analysis supported a six-factor-structure. Hence, the reliability and validity of the three new subscales was confirmed only partially. The use of the EDI-2 in therapy research and clinical practice is critically discussed.

FEDS : A Framework for Evaluation in Design Science Research

DEFF Research Database (Denmark)

Venable, John; Pries-Heje, Jan; Baskerville, Richard

2015-01-01

Evaluation of design artefacts and design theories is a key activity in Design Science Research (DSR), as it provides feedback for further development and (if done correctly) assures the rigour of the research. However, the extant DSR literature provides insufficient guidance on evaluation...... to enable Design Science Researchers to effectively design and incorporate evaluation activities into a DSR project that can achieve DSR goals and objectives. To address this research gap, this research paper develops, explicates, and provides evidence for the utility of a Framework for Evaluation in Design...... Science (FEDS) together with a process to guide design science researchers in developing a strategy for evaluating the artefacts they develop within a DSR project. A FEDS strategy considers why, when, how, and what to evaluate. FEDS includes a two-dimensional characterisation of DSR evaluation episodes...

Particle Swarm Optimization Approach in a Consignment Inventory System

Science.gov (United States)

Sharifyazdi, Mehdi; Jafari, Azizollah; Molamohamadi, Zohreh; Rezaeiahari, Mandana; Arshizadeh, Rahman

2009-09-01

Consignment Inventory (CI) is a kind of inventory which is in the possession of the customer, but is still owned by the supplier. This creates a condition of shared risk whereby the supplier risks the capital investment associated with the inventory while the customer risks dedicating retail space to the product. This paper considers both the vendor's and the retailers' costs in an integrated model. The vendor here is a warehouse which stores one type of product and supplies it at the same wholesale price to multiple retailers who then sell the product in independent markets at retail prices. Our main aim is to design a CI system which generates minimum costs for the two parties. Here a Particle Swarm Optimization (PSO) algorithm is developed to calculate the proper values. Finally a sensitivity analysis is performed to examine the effects of each parameter on decision variables. Also PSO performance is compared with genetic algorithm.

The Design:Lab as platform in participatory design research

DEFF Research Database (Denmark)

Binder, Thomas; Brandt, Eva

2008-01-01

The notion of laboratory or simply 'lab' has become popular in recent years in areas outside science and technology development. Learning Labs, Innovation Labs, Usability Labs, Media and Communication Labs and even Art Labs designate institutions or fora dedicated to change and experimentation...... as others have frequently used other metaphors like workshop, studio or atelier in design research. In this article we will argue that the laboratory metaphor is particularly suitable and useful for the design:lab, and we will give examples of how we have worked with the design:lab as a platform...

Enige ervaringen met de Beck Depression Inventory (BDI)

NARCIS (Netherlands)

Bouman, TK; Luteijn, F; Albersnagel, FA; van der Ploeg, FAE

1985-01-01

Reviews the research outside the Netherlands concerning the reliability and validity of the Beck Depression Inventory (BDI) and conducted an evaluation of the BDI based on responses from 106 heterogeneous psychiatric patients and 156 undergraduates. Results indicate that the BDI is a reliable

Conceptual design of a system for nuclear material control in a research centre according to the IAEA safeguards requirements

International Nuclear Information System (INIS)

Bueker, H.; Kotte, U.; Stein, G.

1976-01-01

In comparison with other facilities handling nuclear material, a nuclear research centre is characterized by a wider spectrum of operations. This requires a number of installations within the centre such as research reactors, critical assemblies, research institutes and central departments, operating, in general, independently of each other. Nuclear material is stored and processed in small quantities and in different chemical and physical configurations within prescribed license areas. The conceptual design of a new system for nuclear material control in a research centre has to consider the operator's and IAEA's safeguards requirements. Using the example of the Juelich Nuclear Research Centre in the Federal Republic of Germany, these requirements are being examined in conjunction with the specified peculiarities of a nuclear research centre. Following this, a division of the research centre into material balance areas and key measurement points is being proposed, based on the existing facilities and licence areas. The essential characteristic of the concept is a far-reaching displayability of the inventory and flow of nuclear material. The availability of information is based on differentiated material accountancy in conjunction with adequate measurement of nuclear material data. For data processing and generation of data, a computerized record and report system is to be provided as well as a central measurement system. The design of an integrated accountancy system with a central computer and remote terminals is described; various measuring appliances, now being developed or tested, for the non-destructive assay of nuclear material are specified. The functions of a central department for nuclear material management for operating these systems are discussed and the planned verification of nuclear material in the different material balance areas illustrated. On applying the measures described in this paper, the conceptual design of a system for nuclear material

Introduction to the special issue on the personality assessment inventory.

Science.gov (United States)

Kurtz, John E; Blais, Mark A

2007-02-01

This special issue of the Journal of Personality Assessment brings together 13 new research studies on the Personality Assessment Inventory (PAI; Morey, 1991) that should inform users and stimulate future empirical activity with this measure. In 4 articles, authors evaluate the validity scales and indexes of the PAI using both analog and criterion designs and samples from a variety of clinical and forensic settings. In a 5th article, the authors describe a novel approach to profile interpretation using two PAI negative distortion measures. The authors present applications of the PAI to new populations and problems including a German translation of the PAI and profile information for male batterers and victims of head injury. The authors of 2 studies extend research on the validity of the PAI for the assessment of borderline personality disorder. In the final 3 studies, the authors evaluate the validity of PAI measures of violence and aggression to predict subsequent aggressive behavior and institutional misconduct. Finally, the authors offer several suggestions for future research with the PAI.

Using Interdisciplinary and Active Research to Encourage Higher Resolution Research and Prototyping in Design

Directory of Open Access Journals (Sweden)

Adream Blair-Early

2014-10-01

Full Text Available University art and design programs are branching out and creating interdisciplinary programs and research centers that connect design students and faculty across various disciplines such as business, engineering, architecture, information studies, health sciences and education. A human-centered, problem-based approach to design research looks to position industry and academic leaders to work alongside students, community leaders, artists and non-profits to develop creative and innovative solutions to the challenges facing contemporary society. But product design benefits even more from practices that engage users throughout the entire design process, often called participatory design. Participatory design process utilizes user feedback throughout the design process to spur innovation and improve design quality. It is possible in the classroom to engage in participatory design and participatory prototyping through the use of inexpensive 3D printers and laser cutters as well as traditional hand tools, requiring only mastery of a few simple techniques and technology readily available on laptop computers. The class research being presented was conceived as part of a new interdisciplinary classroom research space call the Digital Craft Research Lab (DCRL housed within the department of Art and Design. Courses taught within the DCRL offer students, researchers and faculty continual access to both low resolution and high-resolution prototyping machinery and materials. This paper looks at the role of action and participatory research in a design course that created printed hand innovations in collaboration with a nine-year-old female user. Students were asked to work on modeling new designs as well as capturing the progress in a final open source book and models. This paper asks the question can the use of classroom collaboration, action research and work spaces encourage creativity, innovation, and critical thinking in student and professional

Some empirical evidence on the relationship between inventory management and social responsibility

Directory of Open Access Journals (Sweden)

Khaled Elsayed

2013-09-01

Full Text Available Despite the crucial role that inventory plays in supply chain management (SCM, research that examines the relationship between inventory and corporate social responsibility (CSR is rare. This is surprising given the evidence that inventory represents a huge source of cost, a matter that is often reported as a major impediment in practicing social responsibility in SCM. As such, this paper fills this gape in literature by examining directly the effect of inventory management on CSR. Maximum-likelihood ordered logistic regression was performed on a sample of 38 Egyptian listed firms during the period from 2007 to 2010. The results demonstrate that inventory management exerts a positive and significant coefficient on CSR. Further analysis shows that inventory management cannot be safely dropped from model of analysis. Rather, inventory management does add something unique in explaining differences in CSR. For practitioners interested in optimizing their firms’ values, thinking in managing supply chain imperatives, and specially inventory, in terms of social responsibility may guide them to build up a stock of reputational capital that can be used, in turn, to increase the cost of their rivals. This study, to the best of knowledge, is the first one that offers empirical evidence regarding the effect of inventory management on CSR. Moreover, the paper adds to both SCM and CSR literature by providing empirical evidence from Egypt as an emerging market, where much of the existing evidence reflects experience from developed countries.

Denmark's National Inventory Report 2010

DEFF Research Database (Denmark)

Nielsen, Ole-Kenneth; Lyck, Erik; Mikkelsen, Mette Hjorth

2010-01-01

This report is Denmark's National Inventory Report 2010. The report contains information on Denmark's emission inventories for all years' from 1990 to 2008 for CO2, CH4, N2O, HFCs, PFCs and SF6, NOx, CO, NMVOC, SO2.......This report is Denmark's National Inventory Report 2010. The report contains information on Denmark's emission inventories for all years' from 1990 to 2008 for CO2, CH4, N2O, HFCs, PFCs and SF6, NOx, CO, NMVOC, SO2....

Impacting Society through Engineering Design Research

DEFF Research Database (Denmark)

Howard, Thomas J.

2011-01-01

Following the recent ICED11 conference in Copenhagen, Thomas Howard, ICED11 Assistant Chair and Ass. Professor at DTU has written a reflection on design research and design practice, suggesting that in addition to benefiting society through the improved understanding of methods of and approaches...... to design, the academic design community should through design practice produce empowering products which address societal needs unbound by the necessity for profit....

HHS Enterprise Data Inventory

Data.gov (United States)

U.S. Department of Health & Human Services — The Enterprise Data Inventory (EDI) is the comprehensive inventory listing of agency data resources including public, restricted public, and non-public datasets.

27 CFR 20.170 - Physical inventory.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Physical inventory. 20.170... Users of Specially Denatured Spirits Inventory and Records § 20.170 Physical inventory. Once in each... physical inventory of each formula of new and recovered specially denatured spirits. (Approved by the...

Getting started in research: designing and preparing to conduct a research study.

Science.gov (United States)

Macfarlane, Matthew D; Kisely, Steve; Loi, Samantha; Macfarlane, Stephen; Merry, Sally; Parker, Stephen; Power, Brian; Siskind, Dan; Smith, Geoff; Looi, Jeffrey C

2015-02-01

To discuss common pitfalls and useful tips in designing a quantitative research study, the importance and process of ethical approval, and consideration of funding. Through careful planning, based on formulation of a research question, early career researchers can design and conduct quantitative research projects within the framework of the Scholarly Project or in their own independent projects. © The Royal Australian and New Zealand College of Psychiatrists 2014.

The ABAG biogenic emissions inventory project

Science.gov (United States)

Carson-Henry, C. (Editor)

1982-01-01

The ability to identify the role of biogenic hydrocarbon emissions in contributing to overall ozone production in the Bay Area, and to identify the significance of that role, were investigated in a joint project of the Association of Bay Area Governments (ABAG) and NASA/Ames Research Center. Ozone, which is produced when nitrogen oxides and hydrocarbons combine in the presence of sunlight, is a primary factor in air quality planning. In investigating the role of biogenic emissions, this project employed a pre-existing land cover classification to define areal extent of land cover types. Emission factors were then derived for those cover types. The land cover data and emission factors were integrated into an existing geographic information system, where they were combined to form a Biogenic Hydrocarbon Emissions Inventory. The emissions inventory information was then integrated into an existing photochemical dispersion model.

Integrated model for line balancing with workstation inventory management

Directory of Open Access Journals (Sweden)

Dilip Roy

2010-06-01

Full Text Available In this paper, we address the optimization of an integrated line balancing process with workstation inventory management. While doing so, we have studied the interconnection between line balancing and its conversion process. Almost each and every moderate to large manufacturing industry depends on a long and integrated supply chain, consisting of inbound logistic, conversion process and outbound logistic. In this sense an approach addresses a very general problem of integrated line balancing. Research works reported in the literature so far mainly deals with minimization of cost for inbound and outbound logistic subsystems. In most of the cases conversion process has been ignored. We suggest a generic approach for linking the balancing of the line of production in the conversion area with the customers’ rate of demand in the market and for configuring the related stock chambers. Thus, the main aim of this paper is to translate the underlying problem in the form of mixed nonlinear programming problem and design the optimum supply chain so that the total inventory cost and the cost of balancing loss of the conversion process is jointly minimized and ideal cycle time of the production process is determined along with ideal sizes of the stock chambers. A numerical example has been added to demonstrate the suitability of our approach.

PENGENDALIAN PERSEDIAAN MENGGUNAKAN PENDEKATAN DYNAMIC INVENTORY DENGAN MEMPERTIMBANGKAN KETIDAKPASTIAN PERMINTAAN, YIELD, DAN LEADTIME

Directory of Open Access Journals (Sweden)

Sri Hartini

2012-01-01

Inventory, Dynamic Inventory     Abstract    Inventory management is one of serious problem faced by companies. PT Garuda Putra – Putri Jaya (PT GPPJ Pati is company which produce snack, like coated peanuts, soybean snack, and pillus. With a purpose to support production’s fluency which is afected in consumer demand fulfillment’ fluency, then PT GPPJ Pati management try to assure the availability of roll pack material. But, the failure in inventory management causing overstock in inventory of roll pack material which showed in high value of Days of Inventory (DOI. Based from preliminary research for knowing factors that affected to higher value of DOI, was concluded that the higher value of DOI caused by determination of order quantity that only consider farecast of roll pack material’s need, quantity of safety stock, and outstanding inventory in warehouse without calcuation process and still using intuition and experience of worker. Based form preliminary research, this research try to compared inventory control policy used by company (current policy, and  ( inventory model based form forecasting with uncertainty demand, yield, and lead time which developed by Mohammed Zied Babai [Baba06]. Study of policy comparison was done with implementation of spreadsheet simulation with two policy scenario. From this simulation and policy analysis, was concluded that scenario 2 is best inventory control policy because deliver smallest DOI value, i.e. 36.02 days, and lowest inventory cost, i.e. Rp 5,775,116.41. Key words : Uncertainty Lead Time, Uncertainty Demand, Uncertainty Yield, Days of Inventory, Dynamic Inventory

Endogenous Business Cycle Dynamics within Metzlers Inventory Model: Adding an Inventory Floor.

Science.gov (United States)

Sushko, Irina; Wegener, Michael; Westerhoff, Frank; Zaklan, Georg

2009-04-01

Metzlers inventory model may produce dampened fluctuations in economic activity, thus contributing to our understanding of business cycle dynamics. For some parameter combinations, however, the model generates oscillations with increasing amplitude, implying that the inventory stock of firms eventually turns negative. Taking this observation into account, we reformulate Metzlers model by simply putting a floor to the inventory level. Within the new piecewise linear model, endogenous business cycle dynamics may now be triggered via a center bifurcation, i.e. for certain parameter combinations production changes are (quasi-)periodic.

Savannah River Plant's Accountability Inventory Management System (AIMS) (Nuclear materials inventory control)

International Nuclear Information System (INIS)

Croom, R.G.

1976-06-01

The Accountability Inventory Management System (AIMS) is a new computer inventory control system for nuclear materials at the Savannah River Plant, Aiken, South Carolina. The system has two major components, inventory files and system parameter files. AIMS, part of the overall safeguards program, maintains an up-to-date record of nuclear material by location, produces reports required by ERDA in addition to onplant reports, and is capable of a wide range of response to changing input/output requirements through use of user-prepared parameter cards, as opposed to basic system reprogramming

REPLACEMENT SPARE PART INVENTORY MONITORING USING ADAPTIVE NEURO FUZZY INFERENCE SYSTEM

Directory of Open Access Journals (Sweden)

Hartono Hartono

2016-01-01

Full Text Available Abstract   The amount of inventory is determined on the basis of the demand. So that users can know the demand forecasts need to be done on the request. This study uses the data to implement a replacement parts on the electronic module production equipment in the telecommunications transmission systems, switching, access and power, ie by replacing the electronic module in the system is trouble  or damaged parts of a good electronic module spare parts inventory, while the faulty electronic modules shipped to the Repair Center for repaired again, so that the results of these improvements can replenish spare part  inventory. Parameters speed on improvement process of electronic module broken (repaired, in the form of an average repair time at the repair centers, in order to get back into the electronic module that is ready for used as spare parts in compliance with the safe supply inventory  warehouse.  This research using the method  of  Adaptive Neuro Fuzzy Inference System (ANFIS in developing a decision support system for inventory control of spare parts available in Warehouse Inventory taking into account several parameters supporters, namely demand, improvement and fulfillment of spare parts and repair time. This study uses a recycling input parameter repair faulty electronic module of the customer to immediately replace the module in inventory warehouse,  do improvements in the Repair Center. So the acceleration restoration factor is very influential as the input spare parts inventory supply in the warehouse and using the Adaptive Neuro-Fuzzy Inference System (ANFIS method.   Keywords: ANFIS, inventory control, replacement

Inventory classification based on decoupling points

Directory of Open Access Journals (Sweden)

Joakim Wikner

2015-01-01

Full Text Available The ideal state of continuous one-piece flow may never be achieved. Still the logistics manager can improve the flow by carefully positioning inventory to buffer against variations. Strategies such as lean, postponement, mass customization, and outsourcing all rely on strategic positioning of decoupling points to separate forecast-driven from customer-order-driven flows. Planning and scheduling of the flow are also based on classification of decoupling points as master scheduled or not. A comprehensive classification scheme for these types of decoupling points is introduced. The approach rests on identification of flows as being either demand based or supply based. The demand or supply is then combined with exogenous factors, classified as independent, or endogenous factors, classified as dependent. As a result, eight types of strategic as well as tactical decoupling points are identified resulting in a process-based framework for inventory classification that can be used for flow design.

The application of mixed methods designs to trauma research.

Science.gov (United States)

Creswell, John W; Zhang, Wanqing

2009-12-01

Despite the use of quantitative and qualitative data in trauma research and therapy, mixed methods studies in this field have not been analyzed to help researchers designing investigations. This discussion begins by reviewing four core characteristics of mixed methods research in the social and human sciences. Combining these characteristics, the authors focus on four select mixed methods designs that are applicable in trauma research. These designs are defined and their essential elements noted. Applying these designs to trauma research, a search was conducted to locate mixed methods trauma studies. From this search, one sample study was selected, and its characteristics of mixed methods procedures noted. Finally, drawing on other mixed methods designs available, several follow-up mixed methods studies were described for this sample study, enabling trauma researchers to view design options for applying mixed methods research in trauma investigations.

International Inventory of Software Packages in the Information Field.

Science.gov (United States)

Keren, Carl, Ed.; Sered, Irina, Ed.

Designed to provide guidance in selecting appropriate software for library automation, information storage and retrieval, or management of bibliographic databases, this inventory describes 188 computer software packages. The information was obtained through a questionnaire survey of 600 software suppliers and developers who were asked to describe…

Norms for creativity and implementation in healthcare teams: testing the group innovation inventory

NARCIS (Netherlands)

M.M.H. Strating (Mathilde); A.P. Nieboer (Anna)

2010-01-01

textabstractAbstract OBJECTIVE: To test to what extent the four-factor structure of the group innovation inventory (GII) is confirmed for improvement teams participating in a quality improvement collaborative. DESIGN: Quasi-experimental design with baseline and end-measurement after

Critical Race Design: An Emerging Methodological Approach to Anti-Racist Design and Implementation Research

Science.gov (United States)

Khalil, Deena; Kier, Meredith

2017-01-01

This article is about introducing Critical Race Design (CRD), a research methodology that centers race and equity at the nucleus of educational opportunities by design. First, the authors define design-based implementation research (DBIR; Penuel, Fishman, Cheng, & Sabelli, 2011) as an equity-oriented education research methodology where…

27 CFR 40.523 - Inventories.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Inventories. 40.523... PROCESSED TOBACCO Manufacture of Processed Tobacco Operations by Manufacturers of Processed Tobacco § 40.523 Inventories. Every manufacturer of processed tobacco must provide a true and accurate inventory on TTB F 5210...

Hydrogen inventory in gallium

International Nuclear Information System (INIS)

Mazayev, S.N.; Prokofiev, Yu.G.

1994-01-01

Investigations of hydrogen inventory in gallium (99.9%) were carried out after saturation both from molecular phase and from glow discharge plasma at room temperature, 370 and 520 K. Saturation took place during 3000 s under hydrogen pressure of 20 Pa, and ion flux was about 1x10 15 ions/cm 2 s with an energy about 400 eV during discharge. Hydrogen concentration in Ga at room temperature and that for 370 K by the saturation from gaseous phase was (2-3)x10 14 cm -3 Pa -1/2 . Hydrogen concentration at temperature 520 K increased by five times. Inventory at room temperature for irradiation from discharge was 7x10 16 cm -3 at the dose about 3x10 18 ions/cm 2 . It was more than inventory at temperature 520 K by four times and more than maximum inventory from gaseous phase at 520 K by a factor of 10. Inventory increased when temperature decreased. Diffusion coefficient D=0.003 exp(-2300/RT) cm 2 /s, was estimated from temperature dependence. ((orig.))

Nuclear materials inventory plan

International Nuclear Information System (INIS)

Doerr, R.W.; Nichols, D.H.

1982-03-01

In any processing, manufacturing, or active storage facility it is impractical to assume that any physical security system can prevent the diversion of Special Nuclear Material (SNM). It is, therefore, the responsibility of any DOE Contractor, Licensee, or other holder of SNM to provide assurance that loss or diversion of a significant quantity of SNM is detectable. This ability to detect must be accomplishable within a reasonable time interval and can be accomplished only by taking physical inventories. The information gained and decisions resulting from these inventories can be no better than the SNM accounting system and the quality of measurements performed for each receipt, removal and inventory. Inventories interrupt processing or production operations, increase personnel exposures, and can add significantly to the cost of any operation. Therefore, realistic goals for the inventory must be defined and the relationship of the inherent parameters used in its validation be determined. Purpose of this document is to provide a statement of goals and a plan of action to achieve them

Denmark's National Inventory Report 2014

DEFF Research Database (Denmark)

Nielsen, Ole-Kenneth; Plejdrup, Marlene Schmidt; Winther, Morten

This report is Denmark’s National Inventory Report 2014. The report contains information on Denmark’s emission inventories for all years’ from 1990 to 2012 for CO2, CH4, N2O, HFCs, PFCs and SF6, NOx, CO, NMVOC, SO2......This report is Denmark’s National Inventory Report 2014. The report contains information on Denmark’s emission inventories for all years’ from 1990 to 2012 for CO2, CH4, N2O, HFCs, PFCs and SF6, NOx, CO, NMVOC, SO2...

Denmark's National Inventory Report 2013

DEFF Research Database (Denmark)

Nielsen, Ole-Kenneth; Plejdrup, Marlene Schmidt; Winther, Morten

This report is Denmark’s National Inventory Report 2013. The report contains information on Denmark’s emission inventories for all years’ from 1990 to 2011 for CO2, CH4, N2O, HFCs, PFCs and SF6, NOx, CO, NMVOC, SO2.......This report is Denmark’s National Inventory Report 2013. The report contains information on Denmark’s emission inventories for all years’ from 1990 to 2011 for CO2, CH4, N2O, HFCs, PFCs and SF6, NOx, CO, NMVOC, SO2....

Denmark's National Inventory Report 2017

DEFF Research Database (Denmark)

Nielsen, Ole-Kenneth; Plejdrup, Marlene Schmidt; Winther, Morten

This report is Denmark’s National Inventory Report 2017. The report contains information on Denmark’s emission inventories for all years’ from 1990 to 2015 for CO2, CH4, N2O, HFCs, PFCs and SF6, NOx, CO, NMVOC, SO2......This report is Denmark’s National Inventory Report 2017. The report contains information on Denmark’s emission inventories for all years’ from 1990 to 2015 for CO2, CH4, N2O, HFCs, PFCs and SF6, NOx, CO, NMVOC, SO2...

Six ways to reduce inventory.

Science.gov (United States)

Lunn, T

1996-05-01

The purpose of this presentation is to help you reduce the inventory in your operation. We will accomplish that task by discussing six specific methods that companies have used successfully to reduce their inventory. One common attribute of these successes is that they also build teamwork among the people. Every business operation today is concerned with methods to improve customer service. The real trick is to accomplish that task without increasing inventory. We are all concerned with improving our skills at keeping inventory low.

ANALYSIS MODEL FOR INVENTORY MANAGEMENT

Directory of Open Access Journals (Sweden)

CAMELIA BURJA

2010-01-01

Full Text Available The inventory represents an essential component for the assets of the enterprise and the economic analysis gives them special importance because their accurate management determines the achievement of the activity object and the financial results. The efficient management of inventory requires ensuring an optimum level for them, which will guarantee the normal functioning of the activity with minimum inventory expenses and funds which are immobilised. The paper presents an analysis model for inventory management based on their rotation speed and the correlation with the sales volume illustrated in an adequate study. The highlighting of the influence factors on the efficient inventory management ensures the useful information needed to justify managerial decisions, which will lead to a balancedfinancial position and to increased company performance.

National Wetlands Inventory Polygons

Data.gov (United States)

Minnesota Department of Natural Resources — Wetland area features mapped as part of the National Wetlands Inventory (NWI). The National Wetlands Inventory is a national program sponsored by the US Fish and...

The discriminant (and convergent) validity of the Personality Inventory for DSM-5.

Science.gov (United States)

Crego, Cristina; Gore, Whitney L; Rojas, Stephanie L; Widiger, Thomas A

2015-10-01

A considerable body of research has rapidly accumulated with respect to the validity of the Diagnostic and Statistical Manual of Mental Disorders (5th ed.; DSM-5) dimensional trait model as it is assessed by the Personality Inventory for Diagnostic and Statistical Manual of Mental Disorders (PID-5; Krueger et al., 2012). This research though has not focused specifically on discriminant validity, although allusions to potentially problematic discriminant validity have been raised. The current study addressed discriminant validity, reporting for the first time the correlations among the PID-5 domain scales. Also reported are the bivariate correlations of the 25 PID-5 maladaptive trait scales with the personality domain scales of the NEO Personality Inventory-Revised (Costa & McCrae, 1992), the International Personality Item Pool-NEO (Goldberg et al., 2006), the Inventory of Personal Characteristics (Almagor et al., 1995), the 5-Dimensional Personality Test (van Kampen, 2012), and the HEXACO Personality Inventory-Revised (Lee & Ashton, 2004). The results are discussed with respect to the implications of and alternative explanations for potentially problematic discriminant validity. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

10 CFR 39.37 - Physical inventory.

Science.gov (United States)

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Physical inventory. 39.37 Section 39.37 Energy NUCLEAR... inventory. Each licensee shall conduct a semi-annual physical inventory to account for all licensed material received and possessed under the license. The licensee shall retain records of the inventory for 3 years...

Base-age invariance and inventory projections

Science.gov (United States)

C. J. Cieszewski; R. L. Bailey; B. E. Borders; G. H. Brister; B. D. Shiver

2000-01-01

One of the most important functions of forest inventory is to facilitate management decisions towards forest sustainability based on inventory projections into the future. Therefore, most forest inventories are used for predicting future states of the forests, in modern forestry the most common methods used in inventory projections are based on implicit functions...

Fuel depletion analyses for the HEU core of GHARR-1: Part II: Fission product inventory

International Nuclear Information System (INIS)

Anim-Sampong, S.; Akaho, E.H.K.; Boadu, H.O.; Intsiful, J.D.K.; Osae, S.

1999-01-01

The fission product isotopic inventories have been estimated for a 90.2% highly enriched uranium (HEU) fuel lattice cell of the Ghana Research Reactor-1 (GHARR-1) using the WIMSD/4 transport lattice code. The results indicate a gradual decrease in the Xe 135 inventory, and saturation trend for Sm 149 , Cs 134 and Cs 135 inventories as the fuel is depleted to 10,000 MWd/tU. (author)

Emissions inventories and options for control SUMMARY REPORT

NARCIS (Netherlands)

Swart RJ; Amstel AR van; Born GJ van den; Kroeze C; MTV; LAE

1994-01-01

This report is the final summary report of the project "Social causes of the greenhouse effect ; emissions inventories and options for control", funded by the National Research Programme on Global Air Pollution and Climate Change (NRP) and the Environment Directorate of the Ministry of Housing,

Steam Generator control in Nuclear Power Plants by water mass inventory

Energy Technology Data Exchange (ETDEWEB)

Dong Wei [North Carolina State University, Department of Nuclear Engineering, Box 7909, Raleigh, NC 27695-7909 (United States); Doster, J. Michael [North Carolina State University, Department of Nuclear Engineering, Box 7909, Raleigh, NC 27695-7909 (United States)], E-mail: doster@eos.ncsu.edu; Mayo, Charles W. [North Carolina State University, Department of Nuclear Engineering, Box 7909, Raleigh, NC 27695-7909 (United States)

2008-04-15

Control of water mass inventory in Nuclear Steam Generators is important to insure sufficient cooling of the nuclear reactor. Since downcomer water level is measurable, and a reasonable indication of water mass inventory near steady-state, conventional feedwater control system designs attempt to maintain downcomer water level within a relatively narrow operational band. However, downcomer water level can temporarily react in a reverse manner to water mass inventory changes, commonly known as shrink and swell effects. These complications are accentuated during start-up or low power conditions. As a result, automatic or manual control of water level is difficult and can lead to high reactor trip rates. This paper introduces a new feedwater control strategy for Nuclear Steam Generators. The new method directly controls water mass inventory instead of downcomer water level, eliminating complications from shrink and swell all together. However, water mass inventory is not measurable, requiring an online estimator to provide a mass inventory signal based on measurable plant parameters. Since the thermal-hydraulic response of a Steam Generator is highly nonlinear, a linear state-observer is not feasible. In addition, difficulties in obtaining flow regime and density information within the Steam Generator make an estimator based on analytical methods impractical at this time. This work employs a water mass estimator based on feedforward neural networks. By properly choosing and training the neural network, mass signals can be obtained which are suitable for stable, closed-loop water mass inventory control. Theoretical analysis and simulation results show that water mass control can significantly improve the operation and safety of Nuclear Steam Generators.

Steam Generator control in Nuclear Power Plants by water mass inventory

International Nuclear Information System (INIS)

Dong Wei; Doster, J. Michael; Mayo, Charles W.

2008-01-01

Control of water mass inventory in Nuclear Steam Generators is important to insure sufficient cooling of the nuclear reactor. Since downcomer water level is measurable, and a reasonable indication of water mass inventory near steady-state, conventional feedwater control system designs attempt to maintain downcomer water level within a relatively narrow operational band. However, downcomer water level can temporarily react in a reverse manner to water mass inventory changes, commonly known as shrink and swell effects. These complications are accentuated during start-up or low power conditions. As a result, automatic or manual control of water level is difficult and can lead to high reactor trip rates. This paper introduces a new feedwater control strategy for Nuclear Steam Generators. The new method directly controls water mass inventory instead of downcomer water level, eliminating complications from shrink and swell all together. However, water mass inventory is not measurable, requiring an online estimator to provide a mass inventory signal based on measurable plant parameters. Since the thermal-hydraulic response of a Steam Generator is highly nonlinear, a linear state-observer is not feasible. In addition, difficulties in obtaining flow regime and density information within the Steam Generator make an estimator based on analytical methods impractical at this time. This work employs a water mass estimator based on feedforward neural networks. By properly choosing and training the neural network, mass signals can be obtained which are suitable for stable, closed-loop water mass inventory control. Theoretical analysis and simulation results show that water mass control can significantly improve the operation and safety of Nuclear Steam Generators

The establishment of the atmospheric emission inventories of the ESCOMPTE program

Science.gov (United States)

François, S.; Grondin, E.; Fayet, S.; Ponche, J.-L.

2005-03-01

Within the frame of the ESCOMPTE program, a spatial emission inventory and an emission database aimed at tropospheric photochemistry intercomparison modeling has been developed under the scientific supervision of the LPCA with the help of the regional coordination of Air Quality network AIRMARAIX. This inventory has been established for all categories of sources (stationary, mobile and biogenic sources) over a domain of 19,600 km 2 centered on the cities of Marseilles-Aix-en-Provence in the southeastern part of France with a spatial resolution of 1 km 2. A yearly inventory for 1999 has been established, and hourly emission inventories for 23 days of June and July 2000 and 2001, corresponding to the intensive measurement periods, have been produced. The 104 chemical species in the inventory have been selected to be relevant with respect to photochemistry modeling according to available data. The entire list of species in the inventory numbers 216 which will allow other future applications of this database. This database is presently the most detailed and complete regional emission database in France. In addition, the database structure and the emission calculation modules have been designed to ensure a better sustainability and upgradeability, being provided with appropriate maintenance software. The general organization and method is summarized and the results obtained for both yearly and hourly emissions are detailed and discussed. Some comparisons have been performed with the existing results in this region to ensure the congruency of the results. This leads to confirm the relevance and the consistency of the ESCOMPTE emission inventory.

Annual Danish emissions inventory report to UNECE. Inventory 1990 - 2002

Energy Technology Data Exchange (ETDEWEB)

Illerup, J B; Nielsen, M; Winther, M; Hjort Mikkelsen, M; Lyck, E; Hoffmann, L; Fauser, P

2004-05-01

This report is a documentation report on the emission inventories for Denmark as reported to the UNECE Secretariat under the Convention on Long Range Transboundary Air Pollution due by 15 February 2004. The report contains information on Denmark's emission inventories regarding emissions of (1) SOx for the years 1980-2002, (2) NOx, CO, NMVOC and NH{sub 3} for the years 1985-2002; (3) Particulate matter: TSP, PM10, PM2.5 for the years 2000-2002, (4) Heavy Metals: Pb, Cd, Hg, As, Cr, Cu, Ni, Se and Zn for the years 1990-2002, and (5) Polyaromatic hydrocarbons (PAH): Benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene and indeno(1,2,3-cd)pyrene for the years 1990-2002. Furthermore, the report contains information on background data for emissions inventory. (au)

Annual Danish emissions inventory report to UNECE. Inventory 1990 - 2002

Energy Technology Data Exchange (ETDEWEB)

Illerup, J.B.; Nielsen, M.; Winther, M.; Hjort Mikkelsen, M.; Lyck, E.; Hoffmann, L.; Fauser, P.

2004-05-01

This report is a documentation report on the emission inventories for Denmark as reported to the UNECE Secretariat under the Convention on Long Range Transboundary Air Pollution due by 15 February 2004. The report contains information on Denmark's emission inventories regarding emissions of (1) SOx for the years 1980-2002, (2) NOx, CO, NMVOC and NH{sub 3} for the years 1985-2002; (3) Particulate matter: TSP, PM10, PM2.5 for the years 2000-2002, (4) Heavy Metals: Pb, Cd, Hg, As, Cr, Cu, Ni, Se and Zn for the years 1990-2002, and (5) Polyaromatic hydrocarbons (PAH): Benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene and indeno(1,2,3-cd)pyrene for the years 1990-2002. Furthermore, the report contains information on background data for emissions inventory. (au)

Mixed Methods Research Designs in Counseling Psychology

Science.gov (United States)

Hanson, William E.; Creswell, John W.; Clark, Vicki L. Plano; Petska, Kelly S.; Creswell, David J.

2005-01-01

With the increased popularity of qualitative research, researchers in counseling psychology are expanding their methodologies to include mixed methods designs. These designs involve the collection, analysis, and integration of quantitative and qualitative data in a single or multiphase study. This article presents an overview of mixed methods…

Evaluating Bay Area Methane Emission Inventory

Energy Technology Data Exchange (ETDEWEB)

Fischer, Marc [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jeong, Seongeun [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2016-03-01

As a regulatory agency, evaluating and improving estimates of methane (CH4) emissions from the San Francisco Bay Area is an area of interest to the Bay Area Air Quality Management District (BAAQMD). Currently, regional, state, and federal agencies generally estimate methane emissions using bottom-up inventory methods that rely on a combination of activity data, emission factors, biogeochemical models and other information. Recent atmospheric top-down measurement estimates of methane emissions for the US as a whole (e.g., Miller et al., 2013) and in California (e.g., Jeong et al., 2013; Peischl et al., 2013) have shown inventories underestimate total methane emissions by ~ 50% in many areas of California, including the SF Bay Area (Fairley and Fischer, 2015). The goal of this research is to provide information to help improve methane emission estimates for the San Francisco Bay Area. The research effort builds upon our previous work that produced methane emission maps for each of the major source sectors as part of the California Greenhouse Gas Emissions Measurement (CALGEM) project (http://calgem.lbl.gov/prior_emission.html; Jeong et al., 2012; Jeong et al., 2013; Jeong et al., 2014). Working with BAAQMD, we evaluate the existing inventory in light of recently published literature and revise the CALGEM CH4 emission maps to provide better specificity for BAAQMD. We also suggest further research that will improve emission estimates. To accomplish the goals, we reviewed the current BAAQMD inventory, and compared its method with those from the state inventory from the California Air Resources Board (CARB), the CALGEM inventory, and recent published literature. We also updated activity data (e.g., livestock statistics) to reflect recent changes and to better represent spatial information. Then, we produced spatially explicit CH4 emission estimates on the 1-km modeling grid used by BAAQMD. We present the detailed activity data, methods and derived emission maps by sector

Development of a United States-Mexico Emissions Inventory for the Big Bend Regional Aerosol and Visibility Observational (BRAVO) Study.

Science.gov (United States)

Kuhns, Hampden; Knipping, Eladio M; Vukovich, Jeffrey M

2005-05-01

The Big Bend Regional Aerosol and Visibility Observational (BRAVO) Study was commissioned to investigate the sources of haze at Big Bend National Park in southwest Texas. The modeling domain of the BRAVO Study includes most of the continental United States and Mexico. The BRAVO emissions inventory was constructed from the 1999 National Emission Inventory for the United States, modified to include finer-resolution data for Texas and 13 U.S. states in close proximity. The first regional-scale Mexican emissions inventory designed for air-quality modeling applications was developed for 10 northern Mexican states, the Tula Industrial Park in the state of Hidalgo, and the Popocatépetl volcano in the state of Puebla. Emissions data were compiled from numerous sources, including the U.S. Environmental Protection Agency (EPA), the Texas Natural Resources Conservation Commission (now Texas Commission on Environmental Quality), the Eastern Research Group, the Minerals Management Service, the Instituto Nacional de Ecología, and the Instituto Nacional de Estadistica Geografía y Informática. The inventory includes emissions for CO, nitrogen oxides, sulfur dioxide, volatile organic compounds (VOCs), ammonia, particulate matter (PM) < 10 microm in aerodynamic diameter, and PM < 2.5 microm in aerodynamic diameter. Wind-blown dust and biomass burning were not included in the inventory, although high concentrations of dust and organic PM attributed to biomass burning have been observed at Big Bend National Park. The SMOKE modeling system was used to generate gridded emissions fields for use with the Regional Modeling System for Aerosols and Deposition (REMSAD) and the Community Multiscale Air Quality model modified with the Model of Aerosol Dynamics, Reaction, Ionization and Dissolution (CMAQ-MADRID). The compilation of the inventory, supporting model input data, and issues encountered during the development of the inventory are documented. A comparison of the BRAVO emissions

Recent evidence on the muted inventory cycle

OpenAIRE

Andrew J. Filardo

1995-01-01

Inventories play an important role in business cycles. Inventory build-ups add momentum to the economy during expansions, while inventory liquidations sap economic strength during recessions. In addition, because inventory fluctuations are notoriously difficult to predict, they present considerable uncertainty in assessing the economic outlook.> The role of inventories in shaping the current outlook for the U.S. economy is particularly uncertain. In the early 1990s, inventory swings appeared ...

Integrated inventory information system

Digital Repository Service at National Institute of Oceanography (India)

Sarupria, J.S.; Kunte, P.D.

The nature of oceanographic data and the management of inventory level information are described in Integrated Inventory Information System (IIIS). It is shown how a ROSCOPO (report on observations/samples collected during oceanographic programme...

Radioactive waste inventories and projections

International Nuclear Information System (INIS)

McLaren, L.H.

1982-11-01

This bibliography contains information on radioactive waste inventories and projections included in the Department of Energy's Energy Data Base from January 1981 through September 1982. The arrangement is by report number for reports, followed by nonreports in reverse chronological order. These citations are to research reports, journal articles, books, patents, theses, and conference papers from worldwide sources. Five indexes, each preceded by a brief description, are provided: Corporate Author, Personal Author, Subject, Contract Number, and Report Number. (25 abstracts)

30 CFR 220.032 - Inventories.

Science.gov (United States)

2010-07-01

... operations. The accumulation of surplus stocks shall be avoided by proper materiel control, inventory and... physical inventory that has not been credited to NPSL operations under § 220.015(a)(2) shall be credited to... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Inventories. 220.032 Section 220.032 Mineral...

Revisited Inventory of Glaciers on Axel Heiberg Island, Nunavut

Science.gov (United States)

Thomson, L.; Osinski, G.

2009-05-01

As documented in the IPCC's Climate Change 2007 report, the high latitude regions of the Northern Hemisphere are experiencing the highest rates of warming. Given that 35% of the global glacial ice exists within the Arctic Archipelago, this region provides an excellent laboratory for monitoring the anticipated degree of glacial recession [1]. Evidence of arctic warming through negative mass balance trends has been detected in several studies already [e.g., 2]. Here, we show the importance and value of historical records in the task of monitoring glacial retreat. A highly detailed inventory developed by S. Ommanney in 1969 [3], has been revisited and transformed into digital format for the purposes of integration with modern inventories. The Ommanney inventory covers the entirety of Axel Heiberg Island , NU, and includes details often lacking in present day inventories, including orientations (accumulation and ablation zones), elevations (highest, lowest, elevation of the snowline, and the mean elevations of both the accumulation and ablation areas), length (of the ablation area, exposed ice, and of the total glacier including debris cover), area (of the ablation area, exposed ice, and of the total glacier), accumulation area ratio (AAR), depth, volume, and a six digit code which gives qualitative details on glacier attributes. This report is one of the most thorough and comprehensive glacier inventory report ever published in Canada. More recent inventories used for comparison include the glacier extents created by the National Topographic System based on photography from 1980-1987, as well as extents developed by Dr. Luke Copland for the Global Land Ice Measurements from Space (GLIMS) database using 1999-2000 satellite imagery. Our preliminary results show that approximately 90% of ice bodies under 0.2km on Axel Heiberg Island have disappeared entirely in the 40 year period of interest. The issue of glacier definition will be discussed as a possible cause of these

Developing and testing items for the South African Personality Inventory (SAPI

Directory of Open Access Journals (Sweden)

Carin Hill

2013-11-01

Research purpose: This article reports on the process of identifying items for, and provides a quantitative evaluation of, the South African Personality Inventory (SAPI items. Motivation for the study: The study intended to develop an indigenous and psychometrically sound personality instrument that adheres to the requirements of South African legislation and excludes cultural bias. Research design, approach and method: The authors used a cross-sectional design. They measured the nine SAPI clusters identified in the qualitative stage of the SAPI project in 11 separate quantitative studies. Convenience sampling yielded 6735 participants. Statistical analysis focused on the construct validity and reliability of items. The authors eliminated items that showed poor performance, based on common psychometric criteria, and selected the best performing items to form part of the final version of the SAPI. Main findings: The authors developed 2573 items from the nine SAPI clusters. Of these, 2268 items were valid and reliable representations of the SAPI facets. Practical/managerial implications: The authors developed a large item pool. It measures personality in South Africa. Researchers can refine it for the SAPI. Furthermore, the project illustrates an approach that researchers can use in projects that aim to develop culturally-informed psychological measures. Contribution/value-add: Personality assessment is important for recruiting, selecting and developing employees. This study contributes to the current knowledge about the early processes researchers follow when they develop a personality instrument that measures personality fairly in different cultural groups, as the SAPI does.

Making Theory Relevant: The Gender Attitude and Belief Inventory

Science.gov (United States)

McCabe, Janice

2013-01-01

This article describes and evaluates the Gender Attitude and Belief Inventory (GABI), a teaching tool designed to aid students in (a) realizing how sociological theory links to their personal beliefs and (b) exploring any combination of 11 frequently used theoretical perspectives on gender, including both conservative theories (physiological,…

NRC inventory of dams

International Nuclear Information System (INIS)

Lear, G.E.; Thompson, O.O.

1983-01-01

The NRC Inventory of Dams has been prepared as required by the charter of the NRC Dam Safety Officer. The inventory lists 51 dams associated with nuclear power plant sites and 14 uranium mill tailings dams (licensed by NRC) in the US as of February 1, 1982. Of the 85 listed nuclear power plants (148 units), 26 plants obtain cooling water from impoundments formed by dams. The 51 dams associated with the plants are: located on a plant site (29 dams at 15 plant sites); located off site but provide plant cooling water (18 dams at 11 additional plant sites); and located upstream from a plant (4 dams) - they have been identified as dams whose failure, and ensuing plant flooding, could result in a radiological risk to the public health and safety. The dams that might be considered NRC's responsibility in terms of the federal dam safety program are identified. This group of dams (20 on nuclear power plant sites and 14 uranium mill tailings dams) was obtained by eliminating dams that do not pose a flooding hazard (e.g., submerged dams) and dams that are regulated by another federal agency. The report includes the principal design features of all dams and related useful information

Raw data from the Italian National Forest Inventory are on-line and publicly available

Directory of Open Access Journals (Sweden)

Borghetti M

2016-12-01

Full Text Available Raw data from the Italian National Forest Inventory are on-line and publicly available. The National Forest Service in cooperation with the Forest Monitoring and Management Research Unit of the Council for Agricultural Research and Economics (CREA released the raw data from the National Inventory of Forests and forest Carbon pools - INFC2005 project, the second Italian national forest inventory. Data are available together with metadata information at http://www.inventarioforestale.org/. Users, after registration, can download data from 230.874 living tree stems, 16.472 dead tree stems, 31.083 stumps, from a total of 7.272 field plots (for 1.384 of them additional data on fine woody debris and soil carbon pools are also available.

Realistic bandwidth estimation in the theoretically predicted radionuclide inventory of PWR-UO2 spent fuel derived from reactor design and operating data

International Nuclear Information System (INIS)

Fast, Ivan

2017-01-01

Nuclear energy for power generation produces heat-generating high- and intermediate level radioactive waste (HLW and ILW) for which a safe solution for the handling and disposal has to be found. Currently, many European countries consider the final disposal of HLW and ILW in deep geological formations as the most preferable option. In Germany the main stream of HLW and ILW include spent fuel assemblies from nuclear power plants (NPPs), the vitrified waste and compacted metallic waste of the fuel assembly structural parts originate from reprocessing plants. An important task that occurs within the framework of the Product Quality Control (PQC) of nuclear waste is the assessment of the compliance of any reprocessed waste product inventory with the prescribed limits for each relevant radionuclide (RN). The PQC task is to verify the required quality and safety of nuclear waste prior to transportation to a German repository and to avert the disposal of non-conform waste packages. The verification is usually based on comparing the declared radionuclide inventory of the waste with the presumed or expected composition, which is estimated, based on the known history of the waste and its processing. The difficulty of such estimations for radioactive components from nuclear fuel assemblies is that reactor design parameters and operating histories can have a significant influence on the nuclide inventory of any individual fuel assembly. Thus, knowledge of these parameters is a key issue to determine the realistic concentration ranges, or bandwidths, of the radionuclide inventory. As soon as a governmental decision on the construction of a high-level waste repository will be made, comprehensive radionuclide inventories of the wastes assigned for the deposition will be required. The list of final repository relevant radionuclide is based on the safety assessment for this particular repository, thus it is likely to comprise more-or-less the same radionuclides that need to be

Realistic bandwidth estimation in the theoretically predicted radionuclide inventory of PWR-UO2 spent fuel derived from reactor design and operating data