WorldWideScience

Sample records for intra-tissue refractive index

  1. Refractive index based measurements

    DEFF Research Database (Denmark)

    2014-01-01

    In a method for performing a refractive index based measurement of a property of a fluid such as chemical composition or temperature by observing an apparent angular shift in an interference fringe pattern produced by back or forward scattering interferometry, ambiguities in the measurement caused...

  2. Refractive index based measurements

    DEFF Research Database (Denmark)

    2014-01-01

    In a method for performing a refractive index based measurement of a property of a fluid such as chemical composition or temperature, a chirp in the local spatial frequency of interference fringes of an interference pattern is reduced by mathematical manipulation of the recorded light intensity...

  3. Refractive index based measurements

    DEFF Research Database (Denmark)

    2014-01-01

    A refractive index based measurement of a property of a fluid is measured in an apparatus comprising a variable wavelength coherent light source (16), a sample chamber (12), a wavelength controller (24), a light sensor (20), a data recorder (26) and a computation apparatus (28), by - directing...

  4. Modification of Low Refractive Index Polycarbonate for High Refractive Index Applications

    Directory of Open Access Journals (Sweden)

    Gunjan Suri

    2009-01-01

    Full Text Available Polycarbonates and polythiourethanes are the most popular materials in use today, for optical applications. Polycarbonates are of two types which fall in the category of low refractive index and medium refractive index. The present paper describes the conversion of low refractive index polycarbonates into high refractive index material by the use of a high refractive index monomer, polythiol, as an additive. Novel polycarbonates, where the properties of refractive index and Abbe number can be tailor made, have been obtained. Thermal studies and refractive index determination indicate the formation of a new polymer with improved properties and suitable for optical applications.

  5. Influence of refraction index strength on the light propagation in dielectrics material with periodic refraction index

    Energy Technology Data Exchange (ETDEWEB)

    Hidayat, Arif, E-mail: arif.hidayat.fmipa@um.ac.id; Latifah, Eny; Kurniati, Diana; Wisodo, Hari [Nonlinear Optics Group Department of Physics, Faculty of Mathematics and Natural Sciences State University of Malang (Indonesia)

    2016-04-19

    This study investigated the influence of refraction index strength on the light propagation in refraction index-varied dielectric material. This dielectric material served as photonic lattice. The behavior of light propagation influenced by variation of refraction index in photonic lattice was investigated. Modes of the guiding light were determined numerically using squared-operator iteration method. It was found that the greater the strength of refraction index, the smaller the guiding modes.

  6. Measurements of photoinduced refractive index changes in ...

    Indian Academy of Sciences (India)

    Abstract. We report the pump–probe measurements of nonlinear refractive index changes in photochromic bacteriorhodopsin films. The photoinduced absorption is caused by pump beam at 532 nm and the accompanying refractive index changes are studied using a probe beam at 633 nm. The proposed technique is ...

  7. Refractive index measurement based on confocal method

    Science.gov (United States)

    An, Zhe; Xu, XiPing; Yang, JinHua; Qiao, Yang; Liu, Yang

    2017-10-01

    The development of transparent materials is closed to optoelectronic technology. It plays an increasingly important role in various fields. It is not only widely used in optical lens, optical element, optical fiber grating, optoelectronics, but also widely used in the building material, pharmaceutical industry with vessel, aircraft windshield and daily wear glasses.Regard of solving the problem of refractive index measurement in optical transparent materials. We proposed that using the polychromatic confocal method to measuring the refractive index of transparent materials. In this article, we describes the principle of polychromatic confocal method for measuring the refractive index of glass,and sketched the optical system and its optimization. Then we establish the measurement model of the refractive index, and set up the experimental system. In this way, the refractive index of the glass has been calibrated for refractive index experiment. Due to the error in the experimental process, we manipulated the experiment data to compensate the refractive index measurement formula. The experiment taking the quartz glass for instance. The measurement accuracy of the refractive index of the glass is +/-1.8×10-5. This method is more practical and accurate, especially suitable for non-contact measurement occasions, which environmental requirements is not high. Environmental requirements are not high, the ordinary glass production line up to the ambient temperature can be fully adapted. There is no need for the color of the measured object that you can measure the white and a variety of colored glass.

  8. Microstructured optical fiber refractive index sensor

    DEFF Research Database (Denmark)

    Town, Graham E.; McCosker, Ravi; Yuan, Scott Wu

    2010-01-01

    We describe a dual-core microstructured optical fiber designed for refractive index sensing of fluids. We show that by using the exponential dependence of intercore coupling on analyte refractive index, both large range and high sensitivity can be achieved in the one device. We also show...

  9. Refractive index of plant cell walls

    Science.gov (United States)

    Gausman, H. W.; Allen, W. A.; Escobar, D. E.

    1974-01-01

    Air was replaced with media of higher refractive indices by vacuum infiltration in leaves of cucumber, blackeye pea, tomato, and string bean plants, and reflectance of noninfiltrated and infiltrated leaves was spectrophotometrically measured. Infiltrated leaves reflected less light than noninfiltrated leaves over the 500-2500-nm wavelength interval because cell wall-air interfaces were partly eliminated. Minimal reflectance should occur when the average refractive index of plant cell walls was matched by the infiltrating fluid. Although refractive indices that resulted in minimal reflectance differed among the four plant genera, an average value of 1.425 approximates the refractive index of plant cell walls for the four plant genera.

  10. The Refractive Index is a complex quantity…

    Indian Academy of Sciences (India)

    In the ionosphere, the index of refraction is given by Appleton-Hartee formula. The formula is based on some important assumptions … It considers electron motions only; Medium is considered as cold plasma; The problem is linearized.

  11. The refractive index of relic gravitons

    CERN Document Server

    Giovannini, Massimo

    2016-01-01

    The dynamical evolution of the refractive index of the tensor modes of the geometry produces a specific class of power spectra characterized by a blue (i.e. slightly increasing) slope which is directly determined by the competition of the slow-roll parameter and of the rate of variation of the refractive index. Throughout the conventional stages of the inflationary and post-inflationary evolution, the microwave background anisotropies measurements, the pulsar timing limits and the big-bang nucleosythesis constraints set stringent bounds on the refractive index and on its rate of variation. Within the physically allowed region of the parameter space the cosmic background of relic gravitons leads to a potentially large signal for the ground based detectors (in their advanced version) and for the proposed space-borne interferometers. Conversely, the lack of direct detection of the signal will set a qualitatively new bound on the dynamical variation of the refractive index.

  12. Refractive index contrast in porous silicon multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Nava, R.; Mora, M.B. de la; Tagueena-Martinez, J. [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico, Temixco, Morelos (Mexico); Rio, J.A. del [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico, Temixco, Morelos (Mexico); Centro Morelense de Innovacion y Transferencia Tecnologica, Consejo de Ciencia y Tecnologia del Estado de Morelos (Mexico)

    2009-07-15

    Two of the most important properties of a porous silicon multilayer for photonic applications are flat interfaces and a relative large refractive index contrast between layers in the optical wavelength range. In this work, we studied the effect of the current density and HF electrolyte concentration on the refractive index of porous silicon. With the purpose of increasing the refractive index contrast in a multilayer, the refractive index of porous silicon produced at low current was studied in detail. The current density applied to produce the low porosity layers was limited in order to keep the electrolyte flow through the multilayer structure and to avoid deformation of layer interfaces. We found that an electrolyte composed of hydrofluoric acid, ethanol and glycerin in a ratio of 3:7:1 gives a refractive index contrast around 1.3/2.8 at 600 nm. Several multilayer structures with this refractive index contrast were fabricated, such as dielectric Bragg mirrors and microcavities. Reflectance spectra of the structures show the photonic quality of porous silicon multilayers produced under these electrochemical conditions. (copyright 2009 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  13. Cryogenic refractive index of Heraeus homosil glass

    Science.gov (United States)

    Miller, Kevin H.; Quijada, Manuel A.; Leviton, Douglas B.

    2017-08-01

    This paper reports measurements of the refractive index of Homosil (Heraeus) over the wavelength range of 0.34—3.16 μm and temperature range of 120—335 K. These measurements were performed by using the Cryogenic High Accuracy Refraction Measuring System (CHARMS) facility at the NASA's Goddard Space Flight Center. These measurements were in support of an integrated Structural-Thermal-Optical-Performance (STOP) model that was developed for a fieldwidened Michelson interferometer that is being built and tested for the High Spectral Resolution Lidar (HSRL) project at the NASA Langley Research Center (LaRC). The cryogenic refractive index measurements were required in order to account for the highly sensitive performance of the HSRL instrument to changes in refractive index with temperature, temperature gradients, thermal expansion, and deformation due to mounting stresses. A dense coverage of the absolute refractive index over the aforementioned wavelength and temperature ranges was used to determine the thermo-optic coefficient (dn/dT) and dispersion relation (dn/dλ) as a function of wavelength and temperature. Our measurements of Homosil will be compared with measurements of other glasses from the fused silica family studied in CHARMS as well as measurements reported elsewhere in the literature.

  14. The Index of Refraction of Seawater

    Science.gov (United States)

    1976-01-01

    the three temper- atures. By integrating these linear gradients, we recovered the index of refrection dependence on pressure, at each of the three...U.S. DEPARTMENT OF COMMERCE National Technical Information Service AD-A024 800 The Index of Refraction of Seawater Scripps Institution of...or Government Reports NTIS reports are distributed in the SAIM Announcements and Index categories, or to program. You will receive a notice in your the

  15. Characterising refractive index dispersion in chalcogenide glasses

    DEFF Research Database (Denmark)

    Fang, Y.; Sojka, L.; Jayasuriya, D.

    2016-01-01

    Much effort has been devoted to the study of glasses that contain the chalcogen elements (sulfur, selenium and tellurium) for photonics' applications out to MIR wavelengths. In this paper we describe some techniques for determining the refractive index dispersion characteristics of these glasses...

  16. Real time refractive index measurement by ESPI

    International Nuclear Information System (INIS)

    Torroba, R.; Joenathan, C.

    1991-01-01

    In this paper a method to measure refractive index variations in real time is reported. A technique to introduce reference fringes in real time is discussed. Both the theoretical and experimental results are presented and an example with phase shifting is given. (author). 8 refs, 5 figs

  17. Temporally resolved refractive index structure parameter measurement

    Science.gov (United States)

    Henriksson, Markus; Forsling, Robin

    2017-09-01

    The refractive index structure parameter is the most common measure of optical turbulence. It is defined as a statistical quantity for the Kolmogorov spectrum energy cascade of turbulent eddies of different sizes. As such it is formally assumed to be constant in time and space. However, the large scale variation with the diurnal cycle, with altitude or with terrain characteristics is well known. The ensemble average in the definition of the refractive index structure parameter is thus assumed to be applied over a restricted region in space and time. The question of how large volume is needed to determine the refractive index structure parameter and on how short temporal scales it can vary has not received significant attention. To study the temporal variation we have used two independent measurement systems to measure the path-averaged refractive index structure parameter over a 171 m path at 1 m above ground with higher than 1 Hz temporal resolution. One measurement system uses the differential angle-of-arrival of an array of LEDs. The other system measures the scintillation of a single path laser beam using a photon counting system, with time correlation of picosecond pulses for simultaneous measurement of signal and background and with temporal autocorrelation-based variance determination to separate turbulence related scintillations from shot noise. The data shows excellent agreement between the two measurement systems on second level temporal variation, giving confidence in that the measured values show true variation of the refractive index structure parameter. Large scale variation of up to two orders of magnitude can be coupled to solar insolation on this partly cloudy day. High frequency variations that are consistent between the systems used show factor two changes at time scales below one second.

  18. Effective spectral dispersion of refractive index modulation

    Czech Academy of Sciences Publication Activity Database

    Vojtíšek, Petr; Květoň, M.; Richter, I.

    2017-01-01

    Roč. 19, č. 4 (2017), č. článku 045603. ISSN 2040-8978 R&D Projects: GA MŠk(CZ) LO1206 Institutional support: RVO:61389021 Keywords : volume gratings * holography * dispersion * refractive index modulation Subject RIV: BH - Optics, Masers, Lasers OBOR OECD: Optics (including laser optics and quantum optics) Impact factor: 1.741, year: 2016 http://iopscience.iop.org/article/10.1088/2040-8986/aa6092/meta

  19. Refractive Index of Black and Green Liquors

    Directory of Open Access Journals (Sweden)

    E. A. Avramenko

    2015-01-01

    Full Text Available Lack of reliable data on the optical properties of black and green liquors complicates control of their composition in technological process of sulphate cellulose production. In this regard the paper presents measurement results of refraction index of black liquors n (k,t at concentration in solutions of bone-dry solids up to k = 70% and at temperatures t = 10-90 °C, as well as in green liquors n(C,t at the total alkalinity of C = 0-250 g/l and in the same temperature range. All samples of solutions of black and green liquors were provided by Segezha Pulp and Paper Mill and certified in factory laboratory. Measurements were taken by means of the laboratory Abbe refractometer (URL-1, digital refractometer "Expert pro", goniometer spectrometer GS-5, and ultra-violet spectrophotometer as well. The work also presents optical D density spectra in the ultra-violet region of the wavelengths for the samples of a green liquor and main mineral component to form it, i.e. Na2S (sodium sulphide. To calculate dispersion of n (λ in the visible spectral range, here a Lorentz single-oscillator model was used. The paper discusses study results of dispersive dependence of refraction index in green liquors with various concentration and chemical components of n (λ, C forming them at t = 20°C. Computing and experimental dependences of n (λ had not only good qualitative, but also quite satisfactory quantitative compliance. The work also describes main mineral components defining optical properties in these liquors. Given here data on concentration and temperature dependences of a refraction index in black n(k,t and green n(C,t liquors have been never published before. These data are of essential interest to control soda recovery technologies in manufacturing sulphate cellulose. The received results can be also used to tune and calibrate modern domestic and foreign industrial refractometers.

  20. Diffraction tomography for plasma refractive index measurements

    International Nuclear Information System (INIS)

    Howard, J.; Nazikian, R.; Sharp, L.E.

    1989-01-01

    Measurement of the properties of probing beams of coherent electromagnetic radiation yields essential information about the line of sight integrated plasma refractive index. Presented is a scalar diffraction treatment of forward angle scattering plasma diagnostics based on the diffraction projection theorem first presented by E. Wolf in 1969. New results are obtained for near field scattering from probing Gaussian beams and it is demonstrated that the effects of diffraction need to be addressed for tomographic inversion of near field scattering and interferometry data. 33 refs., 10 figs

  1. Atmospheric stability index using radio occultation refractivity profiles

    Indian Academy of Sciences (India)

    A new stability index based on atmospheric refractivity at ∼500 hPa level and surface measurements of temperature, pressure and humidity is formulated. The new index named here as refractivity based lifted index (RLI) is designed to give similar results as traditionally used lifted index derived from radiosonde profiles of ...

  2. The refractive index of human hemoglobin in the visible range

    International Nuclear Information System (INIS)

    Zhernovaya, O; Tuchin, V; Sydoruk, O; Douplik, A

    2011-01-01

    Because the refractive index of hemoglobin in the visible range is sensitive to the hemoglobin concentration, optical investigations of hemoglobin are important for medical diagnostics and treatment. Direct measurements of the refractive index are, however, challenging; few such measurements have previously been reported, especially in a wide wavelength range. We directly measured the refractive index of human deoxygenated and oxygenated hemoglobin for nine wavelengths between 400 and 700 nm for the hemoglobin concentrations up to 140 g l -1 . This paper analyzes the results and suggests a set of model functions to calculate the refractive index depending on the concentration. At all wavelengths, the measured values of the refractive index depended on the concentration linearly. Analyzing the slope of the lines, we determined the specific refraction increments, derived a set of model functions for the refractive index depending on the concentration, and compared our results with those available in the literature. Based on the model functions, we further calculated the refractive index at the physiological concentration within the erythrocytes of 320 g l -1 . The results can be used to calculate the refractive index in the visible range for arbitrary concentrations provided that the refractive indices depend on the concentration linearly.

  3. Ultrasensitive twin-core photonic bandgap fiber refractive index sensor

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Town, Graham; Bang, Ole

    2009-01-01

    We propose a microfluidic refractive index sensor based on new polymer twin-core photonic bandgap fiber (PBGF). The sensor can achieve ultrahigh detection limit, i.e. >1.4times10-7RIU refractive index unit (RIU), by measuring the coupling wavelength shift.......We propose a microfluidic refractive index sensor based on new polymer twin-core photonic bandgap fiber (PBGF). The sensor can achieve ultrahigh detection limit, i.e. >1.4times10-7RIU refractive index unit (RIU), by measuring the coupling wavelength shift....

  4. Predicting fiber refractive index from a measured preform index profile

    Science.gov (United States)

    Kiiveri, P.; Koponen, J.; Harra, J.; Novotny, S.; Husu, H.; Ihalainen, H.; Kokki, T.; Aallos, V.; Kimmelma, O.; Paul, J.

    2018-02-01

    When producing fiber lasers and amplifiers, silica glass compositions consisting of three to six different materials are needed. Due to the varying needs of different applications, substantial number of different glass compositions are used in the active fiber structures. Often it is not possible to find material parameters for theoretical models to estimate thermal and mechanical properties of those glass compositions. This makes it challenging to predict accurately fiber core refractive index values, even if the preform index profile is measured. Usually the desired fiber refractive index value is achieved experimentally, which is expensive. To overcome this problem, we analyzed statistically the changes between the measured preform and fiber index values. We searched for correlations that would help to predict the Δn-value change from preform to fiber in a situation where we don't know the values of the glass material parameters that define the change. Our index change models were built using the data collected from preforms and fibers made by the Direct Nanoparticle Deposition (DND) technology.

  5. Measurement of Refractive Index Using a Michelson Interferometer.

    Science.gov (United States)

    Fendley, J. J.

    1982-01-01

    Describes a novel and simple method of measuring the refractive index of transparent plates using a Michelson interferometer. Since it is necessary to use a computer program when determining the refractive index, undergraduates could be given the opportunity of writing their own programs. (Author/JN)

  6. Refractive index as materials property. Der Brechungsindex als Stoffeigenschaft

    Energy Technology Data Exchange (ETDEWEB)

    Zilian, U. (Ciba-Geigy AG, Basel (Switzerland))

    1991-10-01

    The investigation of the relationship between refractive index (n) and molecular structure of a series of gases, liquids, and solids led to the conclusion that the refractive index of a substance is an independent molecular property. Light is refracted by two types of electron pairs. a) Bonding Electron Pairs (BEP) and b) Response Electron Pairs (REP). - Paraffins exhibit only BEPs which can easily be counted. REP is a new term we introduce to quantify the effects of several nonbonding electrons. The inert gases, for example, refract solely with REPs. They can be determined, and the most important ones are herein tabulated or delineated in the text. For compounds with known formular weight (M) and density (d), the refractive index can be simply calculated using the following formula. (orig.).

  7. 1D Photonic Crystals with a Sawtooth Refractive Index

    OpenAIRE

    Morozov, G. V.; Sprung, D. W. L.; Martorell, J.

    2013-01-01

    Exact analytical results (in terms of Bessel functions) for the bandgaps, reflectance, and transmittance of one-dimensional photonic crystals with a sawtooth refractive index profile on the period are derived for the first time. This extends a group of exactly solvable models of periodic refractive indices. The asymptotic approximations of the above exact results have been also obtained.

  8. Determining the Thickness and Refractive Index of a Mirror

    Science.gov (United States)

    Uysal, Ahmet

    2010-01-01

    When a laser beam reflects from a back surface glass mirror and falls on a screen, a pattern of discrete bright spots is created by partial reflection and refraction of the light at the air-glass interface and reflection at the mirror surface (Fig. 1). This paper explains how this phenomenon can be used to determine the refractive index and the…

  9. Effect of interfacial refractive index on optical molecular orientation measurements.

    Science.gov (United States)

    Ekhoff, Jessica A; Rowlen, Kathy L

    2002-12-01

    The sensitivity of optical molecular orientation measurements to assumptions regarding thin film refractive index was investigated. Specifically, the influence of the interfacial refractive index on second harmonic generation (SHG) and linear dichroism measurements made in a total internal reflection (TIR) geometry was probed for five distinct molecular systems. The five molecular thin films ranged from weakly adsorbed species in equilibrium with solution to covalently bound molecules. Polarization data from the two techniques were fit using a range of assumed interfacial refractive indices. Surprisingly, a linear relationship between the difference in calculated apparent orientation angle and the difference in solvent-prism refractive index was observed. The trend indicates that for a TIR geometry, the error introduced by the thin film refractive index is negligible when the difference in solvent and prism refractive indices is less than approximately 0.08. However, there are clearly cases, such as a glass/air interface, in which assumptions regarding the thin film refractive index can result in significant error in the extracted orientation angle.

  10. Experimental refractive index determination of the optic fiber's core

    International Nuclear Information System (INIS)

    Oezelsoy, S.

    2005-01-01

    In this work, the Fresnel's fundamental Law was used to be able to obtain the refractive index of the fiber optic's core. The intensity of light reflected from the boundary between two mediums was measured by the optical powermeter (Melles Griot, Universal optical powermeter). In recent technology, the light that is illuminated from the light source can be transported to the boundary region and measured with minimum loss by using the optic fibers which make the measurement more sensitively. The liquid and the optic fiber's core whose refractive indices will be measured are the two mediums and the surface of the optic fiber's core is the boundary region. By dipping the fiber optic probe to the liquids, the reflected light intensities were measured with powermeter via Silicon Detector for single mode fiber and multimode fiber respectively to obtain the refractive index of the optic fiber's core. At this work, because of the using the diode laser with 661,4 nm (FWHM) and He-Ne laser with 632,8 nm (FWHM) the refractive indices were measured at this wavelengthes with the Refractometer (Abbe 60-70, Bellingham+Stanley). If the refractive indices of two mediums are equal, the light doesn't reflect from the boundary. The graphic is drawn depend upon the refractive index of the liquids versus the back reflected light energy and from the minimum point of the curve the effective refractive index of the fiber optic's core is calculated for 661,4 nm and 780 nm

  11. Refractive index of K9 Glass under Shock Loading

    Science.gov (United States)

    Hu, Changming; Wang, Xiang; Cai, Lingcang; Liu, Cangli

    2013-06-01

    We study K9 glass refraction index under shock loading conducted on powder gun,all experimental tests are plate impact loading. The impact veceloty range from 300m/s to 1200m/s, and the measure method is laser interferometer Photon Doppler Velocimetry(PDV) to measure the particle velocity both at the impact interface and free surface, The shock pressure from 2 GPa to 8 GPa, values for refraction are found from velocity corrections that must be made to account for refraction-index changes in the K9 glass due to shock wave motion. Experiment results show that refraction-index of K9 glass changes with the shock pressure in line relations, it can be as measure window to study the interesting materials under 10 GPa during the shock loading.

  12. Integrated Microfibre Device for Refractive Index and Temperature Sensing

    Directory of Open Access Journals (Sweden)

    Sulaiman W. Harun

    2012-08-01

    Full Text Available A microfibre device integrating a microfibre knot resonator in a Sagnac loop reflector is proposed for refractive index and temperature sensing. The reflective configuration of this optical structure offers the advantages of simple fabrication and ease of sensing. To achieve a balance between responsiveness and robustness, the entire microfibre structure is embedded in low index Teflon, except for the 0.5–2 mm diameter microfibre knot resonator sensing region. The proposed sensor has exhibited a linear spectral response with temperature and refractive index. A small change in free spectral range is observed when the microfibre device experiences a large refractive index change in the surrounding medium. The change is found to be in agreement with calculated results based on dispersion relationships.

  13. Ultraviolet light induced refractive index structures in germanosilica

    DEFF Research Database (Denmark)

    Svalgaard, Mikael

    1997-01-01

    application of a scanning near-field optical microscope to obtain high resolution images of UV induced refractive index structures and by monitoring the dynamics of UV induced index changes and luminescence. During part of my ph.d. project I have worked at the National Institute of Standards and Technolgy...

  14. Empirical modelling to predict the refractive index of human blood

    Science.gov (United States)

    Yahya, M.; Saghir, M. Z.

    2016-02-01

    Optical techniques used for the measurement of the optical properties of blood are of great interest in clinical diagnostics. Blood analysis is a routine procedure used in medical diagnostics to confirm a patient’s condition. Measuring the optical properties of blood is difficult due to the non-homogenous nature of the blood itself. In addition, there is a lot of variation in the refractive indices reported in the literature. These are the reasons that motivated the researchers to develop a mathematical model that can be used to predict the refractive index of human blood as a function of concentration, temperature and wavelength. The experimental measurements were conducted on mimicking phantom hemoglobin samples using the Abbemat Refractometer. The results analysis revealed a linear relationship between the refractive index and concentration as well as temperature, and a non-linear relationship between refractive index and wavelength. These results are in agreement with those found in the literature. In addition, a new formula was developed based on empirical modelling which suggests that temperature and wavelength coefficients be added to the Barer formula. The verification of this correlation confirmed its ability to determine refractive index and/or blood hematocrit values with appropriate clinical accuracy.

  15. Empirical modelling to predict the refractive index of human blood.

    Science.gov (United States)

    Yahya, M; Saghir, M Z

    2016-02-21

    Optical techniques used for the measurement of the optical properties of blood are of great interest in clinical diagnostics. Blood analysis is a routine procedure used in medical diagnostics to confirm a patient's condition. Measuring the optical properties of blood is difficult due to the non-homogenous nature of the blood itself. In addition, there is a lot of variation in the refractive indices reported in the literature. These are the reasons that motivated the researchers to develop a mathematical model that can be used to predict the refractive index of human blood as a function of concentration, temperature and wavelength. The experimental measurements were conducted on mimicking phantom hemoglobin samples using the Abbemat Refractometer. The results analysis revealed a linear relationship between the refractive index and concentration as well as temperature, and a non-linear relationship between refractive index and wavelength. These results are in agreement with those found in the literature. In addition, a new formula was developed based on empirical modelling which suggests that temperature and wavelength coefficients be added to the Barer formula. The verification of this correlation confirmed its ability to determine refractive index and/or blood hematocrit values with appropriate clinical accuracy.

  16. Empirical modelling to predict the refractive index of human blood

    International Nuclear Information System (INIS)

    Yahya, M; Saghir, M Z

    2016-01-01

    Optical techniques used for the measurement of the optical properties of blood are of great interest in clinical diagnostics. Blood analysis is a routine procedure used in medical diagnostics to confirm a patient’s condition. Measuring the optical properties of blood is difficult due to the non-homogenous nature of the blood itself. In addition, there is a lot of variation in the refractive indices reported in the literature. These are the reasons that motivated the researchers to develop a mathematical model that can be used to predict the refractive index of human blood as a function of concentration, temperature and wavelength. The experimental measurements were conducted on mimicking phantom hemoglobin samples using the Abbemat Refractometer. The results analysis revealed a linear relationship between the refractive index and concentration as well as temperature, and a non-linear relationship between refractive index and wavelength. These results are in agreement with those found in the literature. In addition, a new formula was developed based on empirical modelling which suggests that temperature and wavelength coefficients be added to the Barer formula. The verification of this correlation confirmed its ability to determine refractive index and/or blood hematocrit values with appropriate clinical accuracy. (paper)

  17. Refractive-Index Sensing with Ultrathin Plasmonic Nanotubes

    DEFF Research Database (Denmark)

    Raza, Søren; Toscano, Giuseppe; Jauho, Antti-Pekka

    2013-01-01

    We study the refractive-index sensing properties of plasmonic nanotubes with a dielectric core and ultrathin metal shell. The few nanometer thin metal shell is described by both the usual Drude model and the nonlocal hydrodynamic model to investigate the effects of nonlocality. We derive an analy......We study the refractive-index sensing properties of plasmonic nanotubes with a dielectric core and ultrathin metal shell. The few nanometer thin metal shell is described by both the usual Drude model and the nonlocal hydrodynamic model to investigate the effects of nonlocality. We derive...... an analytical expression for the extinction cross section and show how sensing of the refractive index of the surrounding medium and the figure of merit are affected by the shape and size of the nanotubes. Comparison with other localized surface plasmon resonance sensors reveals that the nanotube exhibits...

  18. Dirac directional emission in anisotropic zero refractive index photonic crystals.

    Science.gov (United States)

    He, Xin-Tao; Zhong, Yao-Nan; Zhou, You; Zhong, Zhi-Chao; Dong, Jian-Wen

    2015-08-14

    A certain class of photonic crystals with conical dispersion is known to behave as isotropic zero-refractive-index medium. However, the discrete building blocks in such photonic crystals are limited to construct multidirectional devices, even for high-symmetric photonic crystals. Here, we show multidirectional emission from low-symmetric photonic crystals with semi-Dirac dispersion at the zone center. We demonstrate that such low-symmetric photonic crystal can be considered as an effective anisotropic zero-refractive-index medium, as long as there is only one propagation mode near Dirac frequency. Four kinds of Dirac multidirectional emitters are achieved with the channel numbers of five, seven, eleven, and thirteen, respectively. Spatial power combination for such kind of Dirac directional emitter is also verified even when multiple sources are randomly placed in the anisotropic zero-refractive-index photonic crystal.

  19. Refractive index of carcinogen-induced rat mammary tumours

    International Nuclear Information System (INIS)

    Zysk, Adam M; Chaney, Eric J; Boppart, Stephen A

    2006-01-01

    Near-infrared optical techniques for clinical breast cancer screening in humans are rapidly advancing. Based on the computational inversion of the photon diffusion process through the breast, these techniques rely on optical tissue models for accurate image reconstruction. Recent interest has surfaced regarding the effect of refractive index variations on these reconstructions. Although many data exist regarding the scattering and absorption properties of normal and diseased tissue, no measurements of refractive index appear in the literature. In this paper, we present near-infrared refractive index data acquired from N-methyl-N-nitrosourea-induced rat mammary tumours, which are similar in pathology and disease progression to human ductal carcinoma. Eight animals, including one control, were employed in this study, yielding data from 32 tumours as well as adjacent adipose and connective tissues

  20. Refractive index of carcinogen-induced rat mammary tumours

    Science.gov (United States)

    Zysk, Adam M.; Chaney, Eric J.; Boppart, Stephen A.

    2006-05-01

    Near-infrared optical techniques for clinical breast cancer screening in humans are rapidly advancing. Based on the computational inversion of the photon diffusion process through the breast, these techniques rely on optical tissue models for accurate image reconstruction. Recent interest has surfaced regarding the effect of refractive index variations on these reconstructions. Although many data exist regarding the scattering and absorption properties of normal and diseased tissue, no measurements of refractive index appear in the literature. In this paper, we present near-infrared refractive index data acquired from N-methyl-N-nitrosourea-induced rat mammary tumours, which are similar in pathology and disease progression to human ductal carcinoma. Eight animals, including one control, were employed in this study, yielding data from 32 tumours as well as adjacent adipose and connective tissues.

  1. Technique for forming ITO films with a controlled refractive index

    Energy Technology Data Exchange (ETDEWEB)

    Markov, L. K., E-mail: l.markov@mail.ioffe.ru; Smirnova, I. P.; Pavluchenko, A. S.; Kukushkin, M. V.; Zakheim, D. A.; Pavlov, S. I. [Russian Academy of Sciences, Ioffe Physical–Technical Institute (Russian Federation)

    2016-07-15

    A new method for fabricating transparent conducting coatings based on indium-tin oxide (ITO) with a controlled refractive index is proposed. This method implies the successive deposition of material by electron-beam evaporation and magnetron sputtering. Sputtered coatings with different densities (and, correspondingly, different refractive indices) can be obtained by varying the ratio of the mass fractions of material deposited by different methods. As an example, films with effective refractive indices of 1.2, 1.4, and 1.7 in the wavelength range of 440–460 nm are fabricated. Two-layer ITO coatings with controlled refractive indices of the layers are also formed by the proposed method. Thus, multilayer transparent conducting coatings with desired optical parameters can be produced.

  2. A surface refractive index scanning system and method

    DEFF Research Database (Denmark)

    2015-01-01

    The invention relates to a surface refractive index scanning system for characterization of a sample. The system comprises a grating device for holding or receiving the sample, the device comprising at least a first grating region having a first grating width along a transverse direction, and a s......The invention relates to a surface refractive index scanning system for characterization of a sample. The system comprises a grating device for holding or receiving the sample, the device comprising at least a first grating region having a first grating width along a transverse direction...

  3. Designing High-Refractive Index Polymers Using Materials Informatics

    Directory of Open Access Journals (Sweden)

    Vishwesh Venkatraman

    2018-01-01

    Full Text Available A machine learning strategy is presented for the rapid discovery of new polymeric materials satisfying multiple desirable properties. Of particular interest is the design of high refractive index polymers. Our in silico approach employs a series of quantitative structure–property relationship models that facilitate rapid virtual screening of polymers based on relevant properties such as the refractive index, glass transition and thermal decomposition temperatures, and solubility in standard solvents. Exploration of the chemical space is carried out using an evolutionary algorithm that assembles synthetically tractable monomers from a database of existing fragments. Selected monomer structures that were further evaluated using density functional theory calculations agree well with model predictions.

  4. Rainbow refractometry on particles with radial refractive index gradients

    Energy Technology Data Exchange (ETDEWEB)

    Saengkaew, Sawitree [CNRS/Universite et INSA de Rouen, UMR 6614/CORIA, BP12, 76 800, Saint Etienne du Rouvray CEDEX (France); Chulalongkorn University, Center of Excellence in Particle Technology, Faculty of Engineering, Bangkok (Thailand); Charinpanitkul, Tawatchai; Vanisri, Hathaichanok; Tanthapanichakoon, Wiwut [Chulalongkorn University, Center of Excellence in Particle Technology, Faculty of Engineering, Bangkok (Thailand); Biscos, Yves; Garcia, Nicolas; Lavergne, Gerard [ONERA/DMAE, Toulouse (France); Mees, Loic; Gouesbet, Gerard; Grehan, Gerard [CNRS/Universite et INSA de Rouen, UMR 6614/CORIA, BP12, 76 800, Saint Etienne du Rouvray CEDEX (France)

    2007-10-15

    The rainbow refractrometry, under its different configurations (classical and global), is an attractive technique to extract information from droplets in evaporation such as diameter and temperature. Recently a new processing strategy has been developed which increases dramatically the size and refractive index measurements accuracy for homogeneous droplets. Nevertheless, for mono component as well as for multicomponent droplets, the presence of temperature and/or of concentration gradients induce the presence of a gradient of refractive index which affects the interpretation of the recorded signals. In this publication, the effect of radial gradient on rainbow measurements with a high accuracy never reached previously is quantified. (orig.)

  5. Creating Materials with Negative Refraction Index using Topology Optimization

    DEFF Research Database (Denmark)

    Christiansen, Rasmus Ellebæk; Sigmund, Ole

    We apply topology optimization along with full modeling of the electromagnetic (acoustic) field to create metamaterials with negative refraction index. We believe that our approach can be used in the design of metamaterials with specific effective permittivity and permeability e.g. by adapting...... is on the order of the wavelength. We seek a distribution of solid and air in the design cell yielding a prescribed negative refraction index for the slab. Our objective is to minimize the difference in amplitude between the solution to the model problemand a prescribed modulated plane wave behind the slab...

  6. Thermal radiation in quasiperiodic photonic crystals with negative refractive index

    International Nuclear Information System (INIS)

    Medeiros, F F de; Albuquerque, E L; Vasconcelos, M S; Mauriz, P W

    2007-01-01

    In this work we investigated the thermal power spectrum of the electromagnetic radiation through one-dimensional stacks of alternating negative and positive refractive index layers, arranged as truncated quasiperiodic photonic structures obeying the Fibonacci (FB), Thue-Morse (TM), and double-period (DP) sequences. The thermal radiation power spectra are determined by means of a theoretical model based on a transfer matrix formalism for both normal and oblique incidence geometries, together with Kirchoff's second law. We studied the radiation spectra by considering the case where both refractive indices of layers A and B are assumed to be a constant, as well as a more realistic case which takes into account the frequency-dependent electric permittivity ε and magnetic permeability μ to characterize the negative refractive index n in layer B

  7. Negative index of refraction in anisotropic nonmagnetic materials

    Czech Academy of Sciences Publication Activity Database

    Dvořák, Vladimír; Kužel, Petr

    2006-01-01

    Roč. 338, - (2006), s. 195-203 ISSN 0015-0193 R&D Projects: GA AV ČR 1ET300100401 Institutional research plan: CEZ:AV0Z10100520 Keywords : anisotropic dielectric * negative refractive index * surface modes * guided modes Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.389, year: 2006

  8. Nano-imprint gold grating as refractive index sensor

    International Nuclear Information System (INIS)

    Kumari, Sudha; Mohapatra, Saswat; Moirangthem, Rakesh S.

    2016-01-01

    Large scale of fabrication of plasmonic nanostructures has been a challenging task due to time consuming process and requirement of expensive nanofabrication tools such as electron beam lithography system, focused ion beam system, and extreme UV photolithography system. Here, we present a cost-effective fabrication technique so called soft nanoimprinting to fabricate nanostructures on the larger sample area. In our fabrication process, a commercially available optical DVD disc was used as a template which was imprinted on a polymer glass substrate to prepare 1D polymer nano-grating. A homemade nanoimprinting setup was used in this fabrication process. Further, a label-free refractive index sensor was developed by utilizing the properties of surface plasmon resonance (SPR) of a gold coated 1D polymer nano-grating. Refractive index sensing was tested by exposing different solutions of glycerol-water mixture on the surface of gold nano-grating. The calculated bulk refractive index sensitivity was found to be 751nm/RIU. We believed that our proposed SPR sensor could be a promising candidate for developing low-cost refractive index sensor with high sensitivity on a large scale.

  9. excess molar volumes, and refractive index of binary mixtures

    African Journals Online (AJOL)

    Preferred Customer

    It is observed that all mixtures show positive values of VE obviously due to increased physical interactions between glycerol and methanol, and water. KEY WORDS. KEY WORDS: Excess molar, Density, Refractive index, Glycerol, Water, Methanol. INTRODUCTION. The price of fossil diesel is soaring in the recent years and ...

  10. Excess molar volumes, and refractive index of binary mixtures of ...

    African Journals Online (AJOL)

    Excess molar volumes (VE) viscosities and refractive index have been evaluated for binary mixtures of glycerol + water, and glycerol + methanol at 298.15 K and 303.15 K. Excess molar volumes (VE) have been calculated from density. The excess molar volume (VE) results were fitted to the Redlich and Kister type ...

  11. Silicon photonic crystal nanostructures for refractive index sensing

    DEFF Research Database (Denmark)

    Dorfner, Dominic; Hürlimann, T.; Zabel, T.

    2008-01-01

    The authors present the fabrication and optical investigation of Silicon on Insulator photonic crystal drop-filters for use as refractive index sensors. Two types of defect nanocavities (L3 and H1-r) are embedded between two W1 photonic crystal waveguides to evanescently route light at the cavity...

  12. Optofluidic refractive index sensor based on partial reflection

    Science.gov (United States)

    Zhang, Lei; Zhang, Zhang; Wang, Yichuan; Ye, Meiying; Fang, Wei; Tong, Limin

    2017-06-01

    We demonstrate a novel optofluidic refractive index (RI) sensor with high sensitivity and wide dynamic range based on partial reflection. Benefited from the divergent incident light and the output fibers with different tilting angles, we have achieved highly sensitive RI sensing in a wide range from 1.33 to 1.37. To investigate the effectiveness of this sensor, we perform a measurement of RI with a resolution of ca. 5.0×10-5 refractive index unit (RIU) for ethylene glycol solutions. Also, we have measured a series of liquid solutions by using different output fibers, achieving a resolution of ca. 0.52 mg/mL for cane surge. The optofluidic RI sensor takes advantage of the high sensitivity, wide dynamic range, small footprint, and low sample consumption, as well as the efficient fluidic sample delivery, making it useful for applications in the food industry.

  13. Refractive Index Compensation in Over-Determined Interferometric Systems

    Directory of Open Access Journals (Sweden)

    Zdeněk Buchta

    2012-10-01

    Full Text Available We present an interferometric technique based on a differential interferometry setup for measurement under atmospheric conditions. The key limiting factor in any interferometric dimensional measurement are fluctuations of the refractive index of air representing a dominating source of uncertainty when evaluated indirectly from the physical parameters of the atmosphere. Our proposal is based on the concept of an over-determined interferometric setup where a reference length is derived from a mechanical frame made from a material with a very low thermal coefficient. The technique allows one to track the variations of the refractive index of air on-line directly in the line of the measuring beam and to compensate for the fluctuations. The optical setup consists of three interferometers sharing the same beam path where two measure differentially the displacement while the third evaluates the changes in the measuring range, acting as a tracking refractometer. The principle is demonstrated in an experimental setup.

  14. Robust highly stable multi-resonator refractive index sensor

    Science.gov (United States)

    Silfies, Myles; Kalantarov, Dmitriy; Search, Christopher P.

    2018-03-01

    Here we show that a serial array of three evanescently coupled microring resonators can achieve detection limits for refractive index changes in the surrounding environment that are more than 40% better than a single resonator. The improved performance of the three rings occurs when only the central resonator is exposed to the refractive index change and is due to the narrower linewidth that results from the off-resonant coupling to the adjacent resonators. Unlike a single resonator sensor that is usually operated close to critical coupling to maximize the sensitivity, the three resonator configuration is able to achieve superior detection limits over a wide range of inter-resonator couplings. We use this to show that random variations of the couplings resulting from manufacturing variations has a minimal impact on the performance of the three ring system.

  15. Refractive index sensor based on total scattering of plasmonic nanotube

    Science.gov (United States)

    Yao, Kaiqiang; Zeng, Qingbing; Hu, Zengrong; Zhan, Yaohui

    2018-03-01

    Plasmonic nanostructures can couple free space light into anultrafine space; therefore,they are employed extensively in the refractive index sensors to minimize the device size or further improve the detection sensitivity. In this work, the optical response of the plasmonic nanotube are investigated comprehensively by using full wave finite element method. With a subwavelength scale, the silver nanotube have prominent scattering peaks in the visible range, which is very suitable for observing through the dark field microscope. The geometric dependence of the scattering spectra and the sensing performance are evaluated carefully. Results show that the scattering peaks are in linear relationship to the circumstance refractive index and a sensitivity of 337 nm/RIUcan be achieved easily by such a plasmonicnanotube with an optimized size.

  16. Forces and Refractive Index of Molecularly Confined Cyclohexane

    Science.gov (United States)

    Zäch, Michael; Heuberger, Manfred P.; Spencer, Nicholas D.

    2001-03-01

    The density profiles and interaction potentials in confined liquids are thought to oscillate with distance. These short-range interactions manifest as distance modulations in surface forces apparatus (SFA) measurements. They are commonly referred to as solvation forces or structural forces. Unfortunately, the SFA exhibits mechanical instabilities, as any other spring apparatus. Thus, the force-versus-distance profile is not entirely accessible experimentally. Novel measurements performed on the extended surface forces apparatus (eSFA) will be presented. We have measured simultaneously the force-versus-distance profile as well as the refractive index of confined cyclohexane at unprecedented range and resolution. The force curves show previously unreported fine structure. Fluid density variations are inferred from the refractive index data. Our results appear to necessitate modifications to the common picture. They can be interpreted in terms of phase separation, density fluctuations and plastic behaviour which is not compatible with any oscillatory potential.

  17. Optical refraction index and polarization profile of ferroelectric thin films

    Czech Academy of Sciences Publication Activity Database

    Glinchuk, M. D.; Eliseev, E. A.; Deineka, Alexander; Jastrabík, Lubomír; Suchaneck, G.; Sandner, T.; Gerlach, G.; Hrabovský, Miroslav

    2001-01-01

    Roč. 38, 1-4 (2001), s. 101-110 ISSN 1058-4587 R&D Projects: GA MŠk LN00A015; GA ČR GA202/00/1425 Institutional research plan: CEZ:AV0Z1010914 Keywords : thin film * refraction index * polarization * film thickness Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.512, year: 2001

  18. Interference Imaging of Refractive Index Distribution in Thin Samples

    OpenAIRE

    Ivan Turek; Norbert Tarjanyi

    2004-01-01

    There are three versions of interference imaging of refractive index distribution in thin samples suggested in this contribution. These are based on imaging of interference field created by waves reflected from the front and the back sample surface or imaging of interference field of Michelson or Mach-Zehnder interferometer with the sample put in one of the interferometers arm. The work discusses the advantages and disadvantages of these techniques and presents the results of imaging of refre...

  19. Cuvette and method for measuring refractive index in a spectrophotometer

    DEFF Research Database (Denmark)

    2017-01-01

    Embodiments of the present invention include a cuvette (100) for use in determining a refractive index of a sample matter in a spectrophotometer (600), the cuvette comprising a container (102) for holding the sample matter, the container (102) having an entry window (121) that allows input...... or integrally formed in the container and arranged in the radiation path, the photonic crystal having a grating part (111) causing a reflectance spectrum of the photonic crystal to exhibit a resonance. A spectrophotometer is also provided....

  20. Three dimensional refractive index imaging with differential interference contrast microscopy

    Science.gov (United States)

    Aung, Htet; Buckley, Jared; Kostyk, Piotr; Rodriguez, Braulio; Phelan, Shelley; Xu, M.

    2012-03-01

    We report here a new approach based on an extension of the transport of the intensity equation for three dimensional refractive index imaging of a weak phase object from a series of images recorded by a differential interference contrast microscope at different focus (z-stack). Our method is first validated by imaging polystyrene spheres. We then apply this method to monitor in vivo apoptosis of human breast MCF7 epithelial cells. The potential applications are discussed at the end.

  1. The refractive-index correction in powder diffraction

    International Nuclear Information System (INIS)

    Hart, M.; Parrish, W.; Bellotto, M.; Lim, G.S.

    1988-01-01

    Throughout the history of powder diffraction practice there has been uncertainty about whether or not a refractive-index correction should be made to Bragg's law. High-precision Bragg-angle measurements have been performed with synchrotron radiation on SRM-640 silicon powders at glancing angles; it is found that little or no correction is necessary for the usual 2θ angle range. (orig.)

  2. A new iterative algorithm to reconstruct the refractive index.

    Science.gov (United States)

    Liu, Y J; Zhu, P P; Chen, B; Wang, J Y; Yuan, Q X; Huang, W X; Shu, H; Li, E R; Liu, X S; Zhang, K; Ming, H; Wu, Z Y

    2007-06-21

    The latest developments in x-ray imaging are associated with techniques based on the phase contrast. However, the image reconstruction procedures demand significant improvements of the traditional methods, and/or new algorithms have to be introduced to take advantage of the high contrast and sensitivity of the new experimental techniques. In this letter, an improved iterative reconstruction algorithm based on the maximum likelihood expectation maximization technique is presented and discussed in order to reconstruct the distribution of the refractive index from data collected by an analyzer-based imaging setup. The technique considered probes the partial derivative of the refractive index with respect to an axis lying in the meridional plane and perpendicular to the propagation direction. Computer simulations confirm the reliability of the proposed algorithm. In addition, the comparison between an analytical reconstruction algorithm and the iterative method has been also discussed together with the convergent characteristic of this latter algorithm. Finally, we will show how the proposed algorithm may be applied to reconstruct the distribution of the refractive index of an epoxy cylinder containing small air bubbles of about 300 micro of diameter.

  3. Origami with negative refractive index to generate super-lenses

    International Nuclear Information System (INIS)

    Guenneau, Fanny; Chakrabarti, Sangeeta; Guenneau, Sebastien; Ramakrishna, S Anantha

    2014-01-01

    Negative refractive index materials (NRIM) enable unique effects including superlenses with a high degree of sub-wavelength image resolution, a capability that stems from the ability of NRIM to support a host of surface plasmon states. Using a generalized lens theorem and the powerful tools of transformational optics, a variety of focusing configurations involving complementary positive and negative refractive index media can be generated. A paradigm of such complementary media are checkerboards that consist of alternating cells of positive and negative refractive index, and are associated with very singular electromagnetics. We present here a variety of multi-scale checkerboard lenses that we call origami lenses and investigate their electromagnetic properties both theoretically and computationally. Some of these meta-structures in the plane display thin bridges of complementary media, and this highly enhances their plasmonic response. We demonstrate the design of three-dimensional checkerboard meta-structures of complementary media using transformational optics to map the checkerboard onto three-dimensional corner lenses, the only restriction being that the corresponding unfolded structures in the plane are constrained by the four color-map theorem. (paper)

  4. Refractive index retrieving of polarization maintaining optical fibers

    Science.gov (United States)

    Ramadan, W. A.; Wahba, H. H.; Shams El-Din, M. A.; Abd El-Sadek, I. G.

    2018-01-01

    In this paper, the cross-section images, of two different types of polarization maintaining (PM) optical fibers, are employed to estimate the optical phase variation due to transverse optical rays passing through these optical fibers. An adaptive algorithm is proposed to recognize the different areas constituting the PM optical fibers cross-sections. These areas are scanned by a transverse beam to calculate the optical paths for given values of refractive indices. Consequently, the optical phases across the PM optical fibers could be recovered. PM optical fiber is immersed in a matching fluid and set in the object arm of Mach-Zehnder interferometer. The produced interferograms are analyzed to extract the optical phases caused by the PM optical fibers. The estimated optical phases could be optimized to be in good coincidence with experimentally extracted ones. This has been achieved through changing of the PM optical fibers refractive indices to retrieve the correct values. The correct refractive indices values are confirmed by getting the best fit between the estimated and the extracted optical phases. The presented approach is a promising one because it provides a quite direct and accurate information about refractive index, birefringence and beat length of PM optical fibers comparing with different techniques handle the same task.

  5. Interference Imaging of Refractive Index Distribution in Thin Samples

    Directory of Open Access Journals (Sweden)

    Ivan Turek

    2004-01-01

    Full Text Available There are three versions of interference imaging of refractive index distribution in thin samples suggested in this contribution. These are based on imaging of interference field created by waves reflected from the front and the back sample surface or imaging of interference field of Michelson or Mach-Zehnder interferometer with the sample put in one of the interferometers arm. The work discusses the advantages and disadvantages of these techniques and presents the results of imaging of refrective index distribution in photorefractive record of a quasi-harmonic optical field in thin LiNbO3 crystal sample.

  6. Imaging based refractometer for hyperspectral refractive index detection

    Science.gov (United States)

    Baba, Justin S.; Boudreaux, Philip R.

    2015-11-24

    Refractometers for simultaneously measuring refractive index of a sample over a range of wavelengths of light include dispersive and focusing optical systems. An optical beam including the range of wavelengths is spectrally spread along a first axis and focused along a second axis so as to be incident to an interface between the sample and a prism at a range of angles of incidence including a critical angle for at least one wavelength. An imaging detector is situated to receive the spectrally spread and focused light from the interface and form an image corresponding to angle of incidence as a function of wavelength. One or more critical angles are identified and corresponding refractive indices are determined.

  7. Measurement of the Microwave Refractive Index of Materials Based on Parallel Plate Waveguides

    Science.gov (United States)

    Zhao, F.; Pei, J.; Kan, J. S.; Zhao, Q.

    2017-12-01

    An electrical field scanning apparatus based on a parallel plate waveguide method is constructed, which collects the amplitude and phase matrices as a function of the relative position. On the basis of such data, a method for calculating the refractive index of the measured wedge samples is proposed in this paper. The measurement and calculation results of different PTFE samples reveal that the refractive index measured by the apparatus is substantially consistent with the refractive index inferred with the permittivity of the sample. The proposed refractive index calculation method proposed in this paper is a competitive method for the characterization of the refractive index of materials with positive refractive index. Since the apparatus and method can be used to measure and calculate arbitrary direction of the microwave propagation, it is believed that both of them can be applied to the negative refractive index materials, such as metamaterials or “left-handed” materials.

  8. Phase sensitive diffraction sensor for high sensitivity refractive index measurement

    Science.gov (United States)

    Kumawat, Nityanand; Varma, Manoj; Kumar, Sunil

    2018-02-01

    In this study a diffraction based sensor has been developed for bio molecular sensing applications and performing assays in real time. A diffraction grating fabricated on a glass substrate produced diffraction patterns both in transmission and reflection when illuminated by a laser diode. We used zeroth order I(0,0) as reference and first order I(0,1) as signal channel and conducted ratiometric measurements that reduced noise by more than 50 times. The ratiometric approach resulted in a very simple instrumentation with very high sensitivity. In the past, we have shown refractive index measurements both for bulk and surface adsorption using the diffractive self-referencing approach. In the current work we extend the same concept to higher diffraction orders. We have considered order I(0,1) and I(1,1) and performed ratiometric measurements I(0,1)/I(1,1) to eliminate the common mode fluctuations. Since orders I(0,1) and I(1,1) behaved opposite to each other, the resulting ratio signal amplitude increased more than twice compared to our previous results. As a proof of concept we used different salt concentrations in DI water. Increased signal amplitude and improved fluid injection system resulted in more than 4 times improvement in detection limit, giving limit of detection 1.3×10-7 refractive index unit (RIU) compared to our previous results. The improved refractive index sensitivity will help significantly for high sensitivity label free bio sensing application in a very cost-effective and simple experimental set-up.

  9. Experimental determination of soot refractive index in the infrared

    International Nuclear Information System (INIS)

    Ouf, F.X.; Vendel, J.; Ouf, F.X.; Coppalle, A.; Weil, M.E.; Yon, J.

    2007-01-01

    The study of physical properties of soot particles produced during combustion is a complex subject but of a great interest within the framework of the study of the safety of an installation, with respect to the fire hazard. These characteristics are, in this case, particularly useful in order to predict the behaviour of containment barriers in situation of fire, but also in order to estimate the contribution of these particles to radiative transfers. The aim of this study is to determine the radiative properties of soot particles produced during combustion. A specific device, which establishes extinction and vertical-vertical scattering coefficients, has been developed and has allowed to determine the refractive index of soot particles in the infrared. This determination also needed the establishment of size distribution and morphological properties of soot aggregates. We present in this document the experimental device developed, and the validation of this device on latex spheres which optical properties are well known. First results of extinction coefficients will be presented and will underline the similar optical behaviour of different soot aggregates. Values of refractive index will be detailed and discussed, and a direct application of these values will be carried out in order to determine the soot volume fraction. A comparison with reference method will underline the efficiency of our method. We will conclude on the validity of the information brought by this device and on the prospects of this study. A discussion is included, on the utility of mean values of refractive index and on the determination of total emissivity of soot particles. (authors)

  10. Zero refractive index in time-Floquet acoustic metamaterials

    Science.gov (United States)

    Koutserimpas, Theodoros T.; Fleury, Romain

    2018-03-01

    New scientific investigations of artificially structured materials and experiments have exhibited wave manipulation to the extreme. In particular, zero refractive index metamaterials have been on the front line of wave physics research for their unique wave manipulation properties and application potentials. Remarkably, in such exotic materials, time-harmonic fields have an infinite wavelength and do not exhibit any spatial variations in their phase distribution. This unique feature can be achieved by forcing a Dirac cone to the center of the Brillouin zone ( Γ point), as previously predicted and experimentally demonstrated in time-invariant metamaterials by means of accidental degeneracy between three different modes. In this article, we propose a different approach that enables true conical dispersion at Γ with twofold degeneracy and generates zero index properties. We break time-reversal symmetry and exploit a time-Floquet modulation scheme to demonstrate a time-Floquet acoustic metamaterial with zero refractive index. This behavior, predicted using stroboscopic analysis, is confirmed by full-wave finite element simulations. Our results establish the relevance of time-Floquet metamaterials as a novel reconfigurable platform for wave control.

  11. Preparation of planar graded refractive index nanocomposites using microfluidics

    International Nuclear Information System (INIS)

    Baah, David; Tigner, Julaunica; Bean, Kala; Britton, Bernard; Walker, Nicole; Henderson, Gwynetta; Floyd-Smith, Tamara

    2011-01-01

    Highlights: → Preparation of planar graded refractive index nanocomposites using microfluidics → Microfluidic channels dispersed nanoparticles achieving high fidelity profiles. → A dispersion of rutile TiO 2 nanoparticles created optically functional materials. → A Δn of 0.1 and an optically transparent material were achieved. - Abstract: In this paper, a microfluidics-based approach for preparing graded refractive index polymer composites is described. These graded refractive index polymers have potential for optical applications due to the fidelity and variety of the profiles that can be achieved using microfluidics technology. In this study, microfluidic devices, fabricated in poly(dimethylsiloxane) (PDMS), dispersed TiO 2 nanoparticles in a prepolymer solution consisting of low molecular weight poly(ethylene glycol diacrylate) (PEGDA). Following dispersion of the particles to produce a controlled gradient profile in the liquid pre-polymer solution, UV light polymerized the solution to produce graded refractive index nanocomposites. Initially, as a means of understanding the flow parameters and straightforward elucidation of the gradient profiles, fluorescent polystyrene nanoparticles were dispersed. After a general method for dispersing nanoparticles was developed, anatase TiO 2 was synthesized and dispersed to produce nanocomposites. However, transmission electron microscope (TEM) analysis and optical microscopy revealed that the particles were agglomerated and, consequently, the amount of TiO 2 that would remain in the pre-polymer solution was severely limited. To address the problem of particle settling, rutile TiO 2 was synthesized using a different precursor and dispersed. Rutile TiO 2 was chosen because the synthesis scheme was expected to yield a well-dispersed solution. Also, rutile TiO 2 is less likely to cause interference with the light used both for the polymerization and for demonstrating the material for optical applications. Following

  12. Electromagnetic Wave Chaos in Gradient Refractive Index Optical Cavities

    International Nuclear Information System (INIS)

    Wilkinson, P. B.; Fromhold, T. M.; Taylor, R. P.; Micolich, A. P.

    2001-01-01

    Electromagnetic wave chaos is investigated using two-dimensional optical cavities formed in a cylindrical gradient refractive index lens with reflective surfaces. When the planar ends of the lens are cut at an angle to its axis, the geometrical ray paths are chaotic. In this regime, the electromagnetic mode spectrum of the cavity is modulated by both real and ghost periodic ray paths, which also 'scar' the electric field intensity distributions of many modes. When the cavity is coupled to waveguides, the eigenmodes generate complex series of resonant peaks in the electromagnetic transmission spectrum

  13. Refractive index dispersion measurement using carrier-envelope phasemeters

    International Nuclear Information System (INIS)

    Hansinger, Peter; Töpfer, Philipp; Adolph, Daniel; Hoff, Dominik; Rathje, Tim; Sayler, A Max; Paulus, Gerhard G; Dimitrov, Nikolay; Dreischuh, Alexander

    2017-01-01

    We introduce a novel method for direct and accurate measurement of refractive index dispersion based on carrier-envelope phase detection of few-cycle laser pulses, exploiting the difference between phase and group velocity in a dispersive medium. In a layout similar to an interferometer, two carrier-envelope phasemeters are capable of measuring the dispersion of a transparent or reflective sample, where one phasemeter serves as the reference and the other records the influence of the sample. Here we report on proof-of-principle measurements that already reach relative uncertainties of a few 10 −4 . Further development is expected to allow for unprecedented precision. (paper)

  14. Dark Matter Constraints from a Cosmic Index of Refraction

    Energy Technology Data Exchange (ETDEWEB)

    Gardner, Susan; Latimer, David C.

    2009-04-01

    The dark-matter candidates of particle physics invariably possess electromagnetic interactions, if only via quantum fluctuations. Taken en masse, dark matter can thus engender an index of refraction which deviates from its vacuum value. Its presence is signaled through frequency-dependent effects: the real part yields dispersive effects in propagation, and the imaginary part yields such in attenuation. We discuss theoretical constraints on the expansion of the index of refraction with frequency, the physical interpretation of the terms, and the particular observations needed to isolate its coefficients. This, with the advent of new opportunities to view gamma-ray bursts at cosmological distance scales, gives us a new probe of dark matter. As a first application we use the time delay determined from radio afterglow observations of gamma-ray bursts to limit the charge-to-mass ratio of dark matter to |{var_epsilon}|/M < 1.8 x 10{sup -5} eV{sup -1} at 95% CL.

  15. Refractive index sensing using Fluorescence Lifetime Imaging (FLIM)

    International Nuclear Information System (INIS)

    Jones, Carolyn; Suhling, Klaus

    2006-01-01

    The fluorescence lifetime is a function of the refractive index of the fluorophore's environment, for example in the case of the biologically important green fluorescent protein (GFP). In order to address the question whether this effect can be exploited to image the local environment of specific proteins in cell biology, we need to determine the distance over which the fluorophore's lifetime is sensitive to the refractive index. To this end, we employ Fluorescence Lifetime Imaging (FLIM) of fluorescein in NaOH buffer at an interface. This approach allows us to map the fluorescence lifetime as a function of distance from a buffer/air and buffer/oil interface. Preliminary data show that the fluorescence lifetime of fluorescein increases near a buffer/air interface and decreases near a buffer/oil interface. The range over which this fluorescence lifetime change occurs is found to be of the order several μm which is consistent with a theoretical model based on the full width at half maximum of the emission spectrum proposed by Toptygin

  16. Laser Induced Refractive Index Change in Nematic Liquid Crystals

    Directory of Open Access Journals (Sweden)

    Crispulo Larraga

    1999-12-01

    Full Text Available We report the observation of laser induced refractive index change for a homeotropically aligned nematic liquid crystal (BDH-E7 film of 10 mm thickness. Diffraction rings were observed when an intense Ar+ ion laser hits a homeotropically aligned nematic liquid crystal at normal incidence above a threshold of 110 KW/cm2, which correspond to the threshold of the Optical Freedericksz Transition (OFT. Above the threshold, as the laser intensity was increased, the number of observed diffraction rings likewise increased. The mechanism for optical molecular reorientation has a great dependence on elastic restoring forces. By exploring the dependence of bend elastic constant, K33 with Freedericksz transition, the value of the K33 was calculated at 2.6 x 10-12 N. To investigate the behavior of Dn as a function of intensity, an experiment was performed for oblique laser incidence. It was shown that the refractive index change increased linearly from values of 0.00 1 to 0.18 at laser intensities ranging from 50 KW /cm2 to 200 KW /cm2. The Kerr coefficient n2 was calculated for various laser incidence angles.

  17. Quasi-D-shaped optical fiber plasmonic refractive index sensor

    Science.gov (United States)

    An, Guowen; Li, Shuguang; Wang, Haiyang; Zhang, Xuenan; Yan, Xin

    2018-03-01

    A quasi-D-shaped photonic crystal fiber plasmonic sensor with a rectangular lattice is proposed by using Au as a plasmonic layer and graphene to enhance the sensing performance. By moving the core to the edge of the fiber, a shorter polishing depth is achieved, which makes the fiber proposed have a greater mechanical strength than other common D-shaped fibers. Benefiting from the natural advantage of the rectangular lattice, the dual sensing channels make the proposed sensor show a maximum wavelength interrogation sensitivity of 3877 nm/RIU with the dynamic refractive index range from 1.33 to 1.42 and a maximum amplitude sensitivity of 1236 RIU-1 with the analyte RI = 1.41 in the visible region. The corresponding resolutions are 2.58 × 10-5 and 8.1 × 10-6 with the methods of the wavelength interrogation method and amplitude- or phase-based method. These advantages make the proposed sensor a competitive candidate for biosensing in the field of refractive index detection, such as water quality analysis, clinical medicine detection, and pharmaceutical testing.

  18. Spatial Frequency Multiplexing of Fiber-Optic Interferometric Refractive Index Sensors Based on Graded-Index Multimode Fibers

    Science.gov (United States)

    Liu, Li; Gong, Yuan; Wu, Yu; Zhao, Tian; Wu, Hui-Juan; Rao, Yun-Jiang

    2012-01-01

    Fiber-optic interferometric sensors based on graded-index multimode fibers have very high refractive-index sensitivity, as we previously demonstrated. In this paper, spatial-frequency multiplexing of this type of fiber-optic refractive index sensors is investigated. It is estimated that multiplexing of more than 10 such sensors is possible. In the multiplexing scheme, one of the sensors is used to investigate the refractive index and temperature responses. The fast Fourier transform (FFT) of the combined reflective spectra is analyzed. The intensity of the FFT spectra is linearly related with the refractive index and is not sensitive to the temperature.

  19. Patient age, refractive index of the corneal stroma, and outcomes of uneventful laser in situ keratomileusis.

    Science.gov (United States)

    Patel, Sudi; Alió, Jorge L; Walewska, Anna; Amparo, Francisco; Artola, Alberto

    2013-03-01

    To determine the influence of age and the corneal stromal refractive index on the difference between the predicted and actual postoperative refractive error after laser in situ keratomileusis (LASIK) and whether the precision of outcomes could be improved by considering age and the refractive index. Vissum Instituto Oftalmologico de Alicante, Alicante, Spain. Case series. Flaps were created using a mechanical microkeratome. The stromal refractive index was measured using a VCH-1 refractometer after flap lifting. Refractive data were obtained 1, 3, and 6 months postoperatively. Uneventful LASIK was performed in 133 eyes. The mean age, refractive index, and applied corrections were 33.4 years ± 9.49 (SD), 1.368 ± 0.006, and -2.43 ± 3.36 diopters (D), respectively. The difference between the predicted and actual postoperative refractive error = 2.315-0.021 age-1.106 refractive index (F = 3.647, r = 0.254, P=.029; n = 109) at 1 month and = 11.820-0.023 age-7.976 refractive index (F = 3.392, r = 0.261, P=.022, n = 106) at 3 months. A correlation between the actual and calculated postoperative refraction improved from r = -0.178 (P=.064; n = 75) to r = -0.418 (P0.50 D) of LASIK could be avoided by considering patient age and the refractive index and by adjusting the applied correction accordingly. Copyright © 2012 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

  20. Interferometric investigation and simulation of refractive index in glass matrixes containing nanoparticles of varying sizes

    Energy Technology Data Exchange (ETDEWEB)

    Feeney, Michael Gerard; Ince, Rabia; Yukselici, Mehmet Hikmet; Allahverdi, Cagdas

    2011-07-01

    The relationship between refractive index and nanoparticle radii of cadmium selenide (CdSe) nanoparticles embedded within glass matrixes was investigated experimentally and by simulations. A homemade automated Michelson interferometer arrangement employing a rotating table and a He-Ne laser source at a wavelength of 632.8 nm determined the refractive index versus nanoparticle radii of embedded cadmium selenide (CdSe) nanoparticles. The refractive index was found to decrease linearly with nanoparticle radius increase. However, one sample showed a step increase in refractive index; on spectroscopic analysis, it was found that its resonant wavelength matched that of the He-Ne source wavelength. The simulations showed that two conditions caused the step increase in refractive index: low plasma frequency and matched sample and source resonances. This simple interferometer setup defines a new method of determining the radii of nanoparticles embedded in substrates and enables refractive index tailoring by modification of exact annealing conditions.

  1. Optical glass with tightest refractive index and dispersion tolerances for high-end optical designs

    Science.gov (United States)

    Jedamzik, R.; Reichel, S.; Hartmann, P.

    2014-03-01

    In high end optical designs the quality of the optical system not only depends on the chosen optical glasses but also on the available refractive index and Abbe number tolerances. The primary optical design is based on datasheet values of the refractive index and Abbe number. In general the optical position of the delivered glass will deviate from the catalog values by given tolerances due to production tolerances. Therefore in many cases the final optical design needs to be modified based on real glass data. Tighter refractive index and Abbe number tolerances can greatly reduce this additional amount of work. The refractive index and Abbe number of an optical glass is a function of the chemical composition and the annealing process. Tight refractive index tolerances require not only a close control and high reliability of the melting and fine annealing process but also best possible material data. These data rely on high accuracy measurement and accurate control during mass production. Modern melting and annealing procedure do not only enable tight index tolerances but also a high homogeneity of the optical properties. Recently SCHOTT was able to introduce the tightest available refractive index and Abbe number tolerance available in the market: step 0.5 meaning a refractive index tolerance of +/- 0.0001 and an Abbe number tolerance of +/- 0.1%. This presentation describes how the refractive index depends on the glass composition and annealing process and describes the requirements to get to this tightest refractive index and Abbe number tolerance.

  2. Refractive index sensor based on optical fiber end face using pulse reference-based compensation technique

    Science.gov (United States)

    Bian, Qiang; Song, Zhangqi; Zhang, Xueliang; Yu, Yang; Chen, Yuzhong

    2018-03-01

    We proposed a refractive index sensor based on optical fiber end face using pulse reference-based compensation technique. With good compensation effect of this compensation technique, the power fluctuation of light source, the change of optic components transmission loss and coupler splitting ratio can be compensated, which largely reduces the background noise. The refractive index resolutions can achieve 3.8 × 10-6 RIU and1.6 × 10-6 RIU in different refractive index regions.

  3. Textile inspired flexible metamaterial with negative refractive index

    Science.gov (United States)

    Burgnies, L.; Lheurette, É.; Lippens, D.

    2015-04-01

    This work introduces metallo-dielectric woven fabric as a metamaterial for phase-front manipulation. Dispersion diagram as well as effective medium parameters retrieved from reflection and transmission coefficients point out negative values of refractive index. By numerical simulations, it is evidenced that a pair of meandered metallic wires, arranged in a top to bottom configuration, can yield to a textile metamaterial with simultaneously negative permittivity and permeability. While the effective negative permittivity stems from the metallic grid arrangement, resonating current loop resulting from the top to bottom configuration of two meandered metallic wires in near proximity produces magnetic activity with negative permeability. By adjusting the distance between pairs of metallic wires, the electric plasma frequency can be shifted to overlap the magnetic resonance. Finally, it is shown that the woven metamaterial is insensitive to the incident angle up to around 60°.

  4. Spatially varying index of refraction: An open ended undergraduate topic

    International Nuclear Information System (INIS)

    Krueger, D.A.

    1980-01-01

    There are many commonplace examples of waves moving along a curved path in an inhomogeneous media. There are reports of a simple lecture demonstration of light bending in a sugar solution being used to motivate students in physics, geophysics, and acoustics courses. For those students who wish to pursue this topic we discuss many avenues of additional research. With relatively simple equipment one can measure the index of refraction n (y,t) and its first and second spatial derivatives as well as the time dependence. The analysis can be approached from a generalization of Snell's law, the equations for the eikonal, Fermat's principle, and the classical approximation and analogies with trajectories of particles

  5. Demystifying back scatter interferometry: a sensitive refractive index detector

    DEFF Research Database (Denmark)

    Jepsen, Søren Terpager; Jørgensen, Thomas Martini; Trydal, Torleif

    2014-01-01

    acting like a common-path interferometer. METHODS: A HeNe laser is directed at a glass capillary with inner diameter of 1.4 mm and reflected light from air/glass and liquid/glass interfaces interfere to form an RI dependent intensity fringe pattern at a CCD detector. The fringe shift relative......BACKGROUND: Back Scatter Interferometry (BSI) is a sensitive method for detecting changes of the refractive index (RI) in small capillaries. The method was originally developed as an off-axial column detector for use in Liquid Chromatography or Capillary Electrophoresis systems, but it has been...... a set of NaCl standard solutions. RESULTS: Ray-tracing show that the basic interference pattern recorded with BSI can be fully described by two beams, one reflected from the surface of the capillary and a beam reflected from the back of the capillary wall. In accordance we find that the interferometric...

  6. Near-Zero-Refractive-Index Structure at Optical Frequencies

    Directory of Open Access Journals (Sweden)

    Hassan S. Ashour

    2013-01-01

    Full Text Available We have used a new class of left-handed materials, which uses 3D nanospheres distributed in loops in the dielectric host material. These 3D nanospheres loops give rise to negative effective permeability and permeability at Terahertz (optical frequencies. The modal dispersion relation for Terahertz TE surface waves has been derived for a slab waveguide constructed from a dielectric material slab sandwiched between two thick layers of Terahertz left-handed material (LHM. The modal dispersion relation and the power flow were numerically solved for a given set of parameters: dielectric slab thickness, the operating frequency, mode order, and the power flow and extinction in the structure. The real part of the effective refractive index exhibits near-zero values, with small extinction coefficient values. Besides that, the power flow in the dielectric core increased with slab thickness increase and the power attenuation decreased with thickness increase.

  7. Loop-mirror-based slot waveguide refractive index sensor

    Directory of Open Access Journals (Sweden)

    Jun-long Kou

    2012-12-01

    Full Text Available Loop mirror has been widely used in fiber optical devices and systems for it provides a smart way to make use of the fiber birefringence properties and can enhance the sensitivity greatly. On the other hand, slot waveguide is very promising for optical sensing applications because of their peculiar spatial mode profile. In this paper, we propose and analyze a loop-mirror-based slot waveguide (LMSW sensor which can be routinely fabricated in modern high-volume complementary metal-oxide–semiconductor (CMOS process. The finite element method (FEM simulation results show that the birefringence can be as high as 0.8 which is orders of magnitude than that in conventional birefringent fiber loop mirror. High sensitivity up to 6 × 103 nm/RIU (refractive index unit is achieved by this scheme.

  8. Flexible photonic crystal membranes with nanoparticle high refractive index layers

    Directory of Open Access Journals (Sweden)

    Torben Karrock

    2017-01-01

    Full Text Available Flexible photonic crystal slabs with an area of 2 cm2 are fabricated by nanoimprint replication of a 400 nm period linear grating nanostructure into a ≈60 µm thick polydimethylsiloxane membrane and subsequent spin coating of a high refractive index titanium dioxide nanoparticle layer. Samples are prepared with different nanoparticle concentrations. Guided-mode resonances with a quality factor of Q ≈ 40 are observed. The highly flexible nature of the membranes allows for stretching of up to 20% elongation. Resonance peak positions for unstretched samples vary from 555 to 630 nm depending on the particle concentration. Stretching results in a resonance shift for these peaks of up to ≈80 nm, i.e., 3.9 nm per % strain. The color impression of the samples observed with crossed-polarization filters changes from the green to the red regime. The high tunability renders these membranes promising for both tunable optical devices as well as visualization devices.

  9. Integrated refractive index optical ring resonator detector for capillary electrophoresis.

    Science.gov (United States)

    Zhu, Hongying; White, Ian M; Suter, Jonathan D; Zourob, Mohammed; Fan, Xudong

    2007-02-01

    We developed a novel miniaturized and multiplexed, on-capillary, refractive index (RI) detector using liquid core optical ring resonators (LCORRs) for future development of capillary electrophoresis (CE) devices. The LCORR employs a glass capillary with a diameter of approximately 100 mum and a wall thickness of a few micrometers. The circular cross section of the capillary forms a ring resonator along which the light circulates in the form of the whispering gallery modes (WGMs). The WGM has an evanescent field extending into the capillary core and responds to the RI change due to the analyte conducted in the capillary, thus permitting label-free measurement. The resonating nature of the WGM enables repetitive light-analyte interaction, significantly enhancing the LCORR sensitivity. This LCORR architecture achieves dual use of the capillary as a sensor head and a CE fluidic channel, allowing for integrated, multiplexed, and noninvasive on-capillary detection at any location along the capillary. In this work, we used electro-osmotic flow and glycerol as a model system to demonstrate the fluid transport capability of the LCORRs. In addition, we performed flow speed measurement on the LCORR to demonstrate its flow analysis capability. Finally, using the LCORR's label-free sensing mechanism, we accurately deduced the analyte concentration in real time at a given point on the capillary. A sensitivity of 20 nm/RIU (refractive index units) was observed, leading to an RI detection limit of 10-6 RIU. The LCORR marries photonic technology with microfluidics and enables rapid on-capillary sample analysis and flow profile monitoring. The investigation in this regard will open a door to novel high-throughput CE devices and lab-on-a-chip sensors in the future.

  10. Change in refractive index of muscle tissue during laser-induced interstitial thermotherapy.

    Science.gov (United States)

    Chen, Na; Chen, Meimei; Liu, Shupeng; Guo, Qiang; Chen, Zhenyi; Wang, Tingyun

    2014-01-01

    This paper presents a long-period fiber-grating (LPG) based Michelson interferometric refractometry to monitor the change in refractive index of porcine muscle during laser-induced interstitial thermotherapy (LITT). As the wavelength of RI interferometer alters with the change in refractive index around the probe, the LPG based refractometry is combined with LITT system to measure the change in refractive index of porcine muscle when irradiated by laser. The experimental results show the denaturation of tissue alters the refractive index significantly and the LPG sensor can be applied to monitor the tissue state during the LITT.

  11. Counter-Propagating Optical Trapping System for Size and Refractive Index Measurement of Microparticles

    National Research Council Canada - National Science Library

    Flynn, Richard A; Shao, Bing; Chachisvilis, Mirianas; Ozkan, Mihrimah; Esener, Sadik C

    2005-01-01

    .... Different from the current best technique for microparticles refractive index measurement, refractometry, a bulk technique requiring changing the fluid composition of the sample, our optical trap...

  12. Monolithic subwavelength high refractive-index-contrast grating VCSELs

    Science.gov (United States)

    Gebski, Marcin; Dems, Maciej; Lott, James A.; Czyszanowski, Tomasz

    2016-03-01

    In this paper we present optical design and simulation results of vertical-cavity surface-emitting lasers (VCSELs) that incorporate monolithic subwavelength high refractive-index-contrast grating (MHCG) mirrors - a new variety of HCG mirror that is composed of high index material surrounded only on one side by low index material. We show the impact of an MHCG mirror on the performance of 980 nm VCSELs designed for high bit rate and energy-efficient optical data communications. In our design, all or part of the all-semiconductor top coupling distributed Bragg reflector mirror is replaced by an undoped gallium-arsenide MHCG. We show how the optical field intensity distribution of the VCSEL's fundamental mode is controlled by the combination of the number of residual distributed Bragg reflector (DBR) mirror periods and the physical design of the topmost gallium-arsenide MHCG. Additionally, we numerically investigate the confinement factors of our VCSELs and show that this parameter for the MHCG DBR VCSELs may only be properly determined in two or three dimensions due to the periodic nature of the grating mirror.

  13. Critical Dispersion-Theory Tests of Silicon's IR Refractive Index

    Science.gov (United States)

    Karstens, William; Smith, D. Y.

    Silicon strongly absorbs both visible and UV light, but is highly transparent in the IR. Hence, it is a common choice for infrared windows and lenses. However, optical design is hindered by literature index values that disagree by up to 1%. In contrast optical-glass indices are known to 0.01% or better. The most widely available silicon IR indices are based on bulk measurements using either Snell's-Law refraction by a prism or channel-spectra interference of front- and backsurface reflections from a planar sample. To test the physical acceptability of these data, we have developed criteria based on a Taylor expansion of the Kramers-Kronig relation for the index at energies below strong inter-band transitions. These tests require that the coefficients of the series in powers of energy squared must be positive within the region of transparency. This is satisfied by essentially all prism measurements; their small scatter arises primarily from impurities and doping. In contrast, channel-spectra data fail in the second and third coefficients. A review of the experimental analysis indicates three problems besides purity: incorrect channel number arising from a channel-spectra model that neglects spectrum distortion by the weak lattice absorption; use of a series expansion of mixed parity in photon energy to describe the even-parity index; and use of an incorrect absorption energy in the Li-Sellmeier dispersion formula. Recommendations for IR index values for pure silicon will be discussed. Supported in part by the US Department of Energy, Office of Science, Office of Nuclear Physics under contract DE-AC02-06CH11357.

  14. High-negative effective refractive index of silver nanoparticles system in nanocomposite films

    Science.gov (United States)

    Altunin, Konstantin K.; Gadomsky, Oleg N.

    2012-03-01

    We have proved on the basis of the experimental optical reflection and transmission spectra of the nanocomposite film of poly(methyl methacrylate) with silver nanoparticles that (PMMA + Ag) nanocomposite films have quasi-zero refractive indices in the optical wavelength range. We show that to achieve quasi-zero values of the complex index of refraction of composite materials is necessary to achieve high-negative effective refractive index in the system of spherical silver nanoparticles.

  15. THz-induced ultrafast modulation of NIR refractive index of silicon

    DEFF Research Database (Denmark)

    Tarekegne, Abebe Tilahun; Hirori, Hideki; Iwaszczuk, Krzysztof

    2016-01-01

    We measure THz-induced change in refractive index of ∼5×10−3 in high resistivity silicon at 800 nm which indicates generation of high density of free carriers. The change in refractive index increases by more than 30 times with high initial carrier density set by optical excitation compared to op...

  16. Design and fabrication activity towards 3D negative refraction index materials in the IR region

    DEFF Research Database (Denmark)

    Malureanu, Radu; Andryieuski, Andrei; Lavrinenko, Andrei

    2009-01-01

    In this paper we present a new 3D isotropic structure that allows obtaining negative refraction index in the telecom wavelength as well as first fabrication efforts towards obtaining such structures.......In this paper we present a new 3D isotropic structure that allows obtaining negative refraction index in the telecom wavelength as well as first fabrication efforts towards obtaining such structures....

  17. When the index of refraction becomes real, it can be written as

    Indian Academy of Sciences (India)

    First page Back Continue Last page Graphics. When the index of refraction becomes real, it can be written as. When the index of refraction becomes real, it can be written as. Where; As X and Y are small, the equation can be approximated as; As X<<1,

  18. X-ray tomography using the full complex index of refraction

    DEFF Research Database (Denmark)

    Nielsen, Mikkel Schou; Lauridsen, Torsten; Thomsen, M.

    2012-01-01

    We report on x-ray tomography using the full complex index of refraction recorded with a grating-based x-ray phase-contrast setup. Combining simultaneous absorption and phase-contrast information, the distribution of the full complex index of refraction is determined and depicted in a bivariate...

  19. Refractive index and dispersion of butterfly chitin and bird keratin measured by polarizing interference microscopy

    NARCIS (Netherlands)

    Leertouwer, Hein L.; Wilts, Bodo D.; Stavenga, Doekele G.

    2011-01-01

    Using Jamin-Lebedeff interference microscopy, we measured the wavelength dependence of the refractive index of butterfly wing scales and bird feathers. The refractive index values of the glass scales of the butterfly Graphium sarpedon are, at wavelengths 400, 500 and 600 nm, 1.572, 1.552 and 1.541,

  20. Construction of Lines of Constant Density and Constant Refractive Index for Ternary Liquid Mixtures.

    Science.gov (United States)

    Tasic, Aleksandar Z.; Djordjevic, Bojan D.

    1983-01-01

    Demonstrates construction of density constant and refractive index constant lines in triangular coordinate system on basis of systematic experimental determinations of density and refractive index for both homogeneous (single-phase) ternary liquid mixtures (of known composition) and the corresponding binary compositions. Background information,…

  1. Refractive index and density in F- and Cl-doped silica glasses

    International Nuclear Information System (INIS)

    Kakiuchida, Hiroshi; Shimodaira, Noriaki; Sekiya, Edson H.; Saito, Kazuya; Ikushima, Akira J.

    2005-01-01

    The refractive index and density of fluorine- and chlorine-doped silica glasses were measured as functions of fictive temperature. The halogen concentrations were observed to have a refractive index or density that is independent of the fictive temperature were found. This implies that these properties are not affected by any heat-treatment conditions

  2. Refractive Index Measurement within a Photonic Crystal Fibre Based on Short Wavelength Diffraction

    Directory of Open Access Journals (Sweden)

    Nathaniel Groothoff

    2007-10-01

    Full Text Available A new class of refractive index sensors using solid core photonic crystal fibres isdemonstrated. Coherent scattering at the cladding lattice is used to optically characterizematerials inserted into the fibre holes. The liquid to solid phase transition of water uponfreezing to ice 1h is characterized by determining the refractive index.

  3. Homodyne chiral polarimetry for measuring thermo-optic refractive index variations.

    Science.gov (United States)

    Twu, Ruey-Ching; Wang, Jhao-Sheng

    2015-10-10

    Novel reflection-type homodyne chiral polarimetry is proposed for measuring the refractive index variations of a transparent plate under thermal impact. The experimental results show it is a simple and useful method for providing accurate measurements of refractive index variations. The measurement can reach a resolution of 7×10-5.

  4. Mazama and Glacier Peak Pumice Glass: Uniformity of Refractive Index after Weathering.

    Science.gov (United States)

    Steen, V C; Fryxell, R

    1965-11-12

    Weathering has had little differential effect on modal values of the index of refraction of pumice glasses from the eruptions of Mount Mazama and Glacier Peak thousands of years ago. Confidence is thus increased that the ranges of values for the index of refraction are reliable characteristics by which the two glasses may be distinguished from one another.

  5. Low-Coherence Reflectometry for Refractive Index Measurements of Cells in Micro-Capillaries

    Science.gov (United States)

    Carpignano, Francesca; Rigamonti, Giulia; Mazzini, Giuliano; Merlo, Sabina

    2016-01-01

    The refractive index of cells provides insights into their composition, organization and function. Moreover, a good knowledge of the cell refractive index would allow an improvement of optical cytometric and diagnostic systems. Although interferometric techniques undoubtedly represent a good solution for quantifying optical path variation, obtaining the refractive index of a population of cells non-invasively remains challenging because of the variability in the geometrical thickness of the sample. In this paper, we demonstrate the use of infrared low-coherence reflectometry for non-invasively quantifying the average refractive index of cell populations gently confined in rectangular glass micro-capillaries. A suspension of human red blood cells in plasma is tested as a reference. As a use example, we apply this technique to estimate the average refractive index of cell populations belonging to epithelial and hematological families. PMID:27727172

  6. The effect of UV irradiation on the refractive index modulation in photo-thermo-refractive glasses: Mechanisms and application

    Science.gov (United States)

    Chernakov, Dmitry I.; Sidorov, Alexander I.; Stolyarchuk, Maxim V.; Kozlova, Darya A.; Krykova, Victoria A.; Nikonorov, Nikolay V.

    2018-02-01

    It is shown experimentally that in photo-thermo-refractive glasses the transformation of charged silver subnanosized molecular clusters to neutral state by UV irradiation results in the increase of glass refractive index. The increment of the refractive index reaches Δn = 0.76·10-4. Computer simulation has shown that the polarizability of neutral molecular clusters is by 20-40% larger than of charged ones. The reason of this is the increase of electron density and volume of electron density surfaces during the transformation of molecular cluster to the neutral state. The transition molecular cluster from the ground state to the excited state also results in the increase of its polarizability.

  7. Thermally tunable broadband terahertz metamaterials with negative refractive index

    Science.gov (United States)

    Li, Weili; Meng, Qinglong; Huang, Renshuai; Zhong, Zheqiang; Zhang, Bin

    2018-04-01

    A thermally tunable broadband metamaterials with negative refractive index (NRI) is investigated in terahertz (THz) region theoretically. The metamaterials is designed by fabricating two stand-up opposite L shape metallic structures on fused quartz substrate, and the indium antimonide (InSb) is filled in the bottom gap of the two L shape structures. The tunability is attributed to the InSb because the InSb can changes the capacitance of the gap area by adjusting the temperature. The transmission characteristics and the retrieved electromagnetic parameters of the metamaterials are analyzed. Results indicate that the resonant frequency and amplitude modulation of the metamaterials can be tuned continuously in broadband range (about 0.62 THz), and the phase modulation from - 2 to 3 rad is also achieved within broadband range (about 0.8 THz). In addition, the metamaterials shows dual-band NRI behaviors at 0 . 4- 0 . 9 THz and 1 . 06- 1 . 15 THz when the temperature increases to 400 K. The wedge-shaped prism simulations are implemented to verify the NRI characteristics and indicate that the NRI of the metamaterials can be achieved.

  8. Porous Silicon Gradient Refractive Index Micro-Optics.

    Science.gov (United States)

    Krueger, Neil A; Holsteen, Aaron L; Kang, Seung-Kyun; Ocier, Christian R; Zhou, Weijun; Mensing, Glennys; Rogers, John A; Brongersma, Mark L; Braun, Paul V

    2016-12-14

    The emergence and growth of transformation optics over the past decade has revitalized interest in how a gradient refractive index (GRIN) can be used to control light propagation. Two-dimensional demonstrations with lithographically defined silicon (Si) have displayed the power of GRIN optics and also represent a promising opportunity for integrating compact optical elements within Si photonic integrated circuits. Here, we demonstrate the fabrication of three-dimensional Si-based GRIN micro-optics through the shape-defined formation of porous Si (PSi). Conventional microfabrication creates Si square microcolumns (SMCs) that can be electrochemically etched into PSi elements with nanoscale porosity along the shape-defined etching pathway, which imparts the geometry with structural birefringence. Free-space characterization of the transmitted intensity distribution through a homogeneously etched PSi SMC exhibits polarization splitting behavior resembling that of dielectric metasurfaces that require considerably more laborious fabrication. Coupled birefringence/GRIN effects are studied by way of PSi SMCs etched with a linear (increasing from edge to center) GRIN profile. The transmitted intensity distribution shows polarization-selective focusing behavior with one polarization focused to a diffraction-limited spot and the orthogonal polarization focused into two laterally displaced foci. Optical thickness-based analysis readily predicts the experimentally observed phenomena, which strongly match finite-element electromagnetic simulations.

  9. Geometry-invariant gradient refractive index lens: analytical ray tracing.

    Science.gov (United States)

    Bahrami, Mehdi; Goncharov, Alexander V

    2012-05-01

    A new class of gradient refractive index (GRIN) lens is introduced and analyzed. The interior iso-indicial contours mimic the external shape of the lens, which leads to an invariant geometry of the GRIN structure. The lens model employs a conventional surface representation using a coincoid of revolution with a higher-order aspheric term. This model has a unique feature, namely, it allows analytical paraxial ray tracing. The height and the angle of an arbitrary incident ray can be found inside the lens in a closed-form expression, which is used to calculate the main optical characteristics of the lens, including the optical power and third-order monochromatic aberration coefficients. Moreover, due to strong coupling of the external surface shape to the GRIN structure, the proposed GRIN lens is well suited for studying accommodation mechanism in the eye. To show the power of the model, several examples are given emphasizing the usefulness of the analytical solution. The presented geometry-invariant GRIN lens can be used for modeling and reconstructing the crystalline lens of the human eye and other types of eyes featuring a GRIN lens.

  10. Terahertz multi-metal-wire hybrid-cladding hollow waveguide for refractive index sensing

    Science.gov (United States)

    Ying-Ying, Yu; Xu-You, Li; Kun-Peng, He; Bo, Sun

    2016-02-01

    We propose a design of terahertz refractive index sensing based on the multi-metal-wire (MMW) hybrid-cladding hollow waveguide. The proposed terahertz hybrid-cladding hollow waveguide comprises one air core in the center surrounding MMW surrounded dielectric. The central air core is used for filling lossless measurands and transmitting terahertz light. In particular, the refractive index sensing is realized by measuring the mode field area (MFA) variation of radially polarized mode. The modal effective refractive index, mode field intensity distribution, and mode field area properties responding to the measurand refractive indexes for different operating frequencies and structure dimensions are investigated, respectively. Simulations show that the proposed terahertz refractive index sensor can realize easily the measurement of the measurand refractive index. Meanwhile, the effects of operating frequency and structure parameters on sensitivity and measurement accuracy are also studied. In view of the trade-off between sensitivity and measurement accuracy, the reasonable choice of the operating frequency and structure parameters can optimize appropriately the sensitivity and measurement accuracy, and the sensitivity can reach approximately 0.585 mm2/RIU (RIU is short for refraction index units) with the proper frequency and structure parameter. Project supported by the National Natural Science Foundation of China (Grant No. 51309059).

  11. Two-dimensional interferometric characterization of laser-induced refractive index profiles in bulk Topas polymer

    Science.gov (United States)

    Hessler, Steffen; Rosenberger, Manuel; Schmauss, Bernhard; Hellmann, Ralf

    2018-01-01

    In this paper we precisely determine laser-induced refractive index profiles created in cyclic olefin copolymer Topas 6017 employing a sophisticated phase shifting Mach-Zehnder interferometry approach. Beyond the usual one-dimensional modification depth measurement we highlight that for straight waveguide structures also a two-dimensional refractive index distribution can be directly obtained providing full information of a waveguide's exact cross section and its gradient refractive index contrast. Deployed as direct data input in optical waveguide simulation, the evaluated 2D refractive index profiles permit a detailed calculation of the waveguides' actual mode profiles. Furthermore, conventional one-dimensional interferometric measurements for refractive index depth profiles with varying total imposed laser fluence of a 248 nm KrF excimer laser are included to investigate the effect on refractive index modification depth. Maximum surface refractive index increase turns out to attain up to 1.86 ·10-3 enabling laser-written optical waveguide channels. Additionally, a comprehensive optical material characterization in terms of dispersion, thermo-optic coefficient and absorption measurement of unmodified and UV-modified Topas 6017 is carried out.

  12. Corneal refractive index-hydration relationship by objective refractometry.

    Science.gov (United States)

    Patel, Sudi; Alió, Jorge L

    2012-11-01

    To compare an objective (VCH-1) with a manual subjective Abbé refractometer (MSAR) and evaluate the refractive index (RI)-hydration (H) relationship for the corneal stroma. Epithelial and endothelial layers were removed from a fresh postmortem ovine corneal buttons. RI was measured at both surfaces using (i) MSAR then (ii) VCH-1. The sample was weighed, slowly dehydrated under controlled conditions (2 h), and RI measures were repeated. Sample was oven dried (90°C) for 3 d to obtain dry weight and hydration at each episode of RI measurement. Average difference between individual pairs of measurements obtained using the two refractometers (ΔRI) was 0.00071 (standard deviation ± 0.0029, 95% confidence interval ± 0.0058). Root mean square difference between measurements obtained by the refractometers was 0.0024. There was no relationship between ΔRI and the mean of each measurement pair (r = 0.201, n = 40, p = 0.214). Linear regression revealed a significant relationship between RI and reciprocal of H at both surfaces as follows: anterior (i) RI = 1.355 + 0.111/H (r = -0.852, n = 20, p = <0.001), (ii) RI = 1.357 + 0.105/H (r = -0.849, n = 20, p = <0.001) and posterior (i) RI = 1.353 + 0.085/H (r = -0.882, n = 20, p = <0.001), (ii) RI = 1.350 + 0.088/H (r = -0.813, n = 20, p = <0.001). VCH-1 measurements are in good agreement with MSAR. RI at the anterior stroma was consistently higher suggesting hydration is lower by 1.10 units (6%) compared with the posterior stroma. Dehydration increased RI at both surfaces by similar rates. Current hypothetical models are useful for predicting RI from H for the posterior, but not the anterior, stroma.

  13. Roughened glass slides and a spectrophotometer for the detection of the wavelength-dependent refractive index of transparent liquids.

    Science.gov (United States)

    Niskanen, Ilpo; Räty, Jukka; Myllylä, Risto; Sutinen, Veijo; Matsuda, Kiyofumi; Homma, Kazuhiro; Silfsten, Pertti; Peiponen, Kai-Erik

    2012-07-01

    We describe a method to determine the wavelength-dependent refractive index of liquids by measurement of light transmittance with a spectrophotometer. The method is based on using roughened glass slides with different a priori known refractive indices and immersing the slides into the transparent liquid with unknown refractive index. Using the dispersion data on the glass material it is possible to find the index match between the liquid and the glass slide, and hence the refractive index of the liquid.

  14. Reflectivity of a disordered monolayer estimated by graded refractive index and scattering models.

    Science.gov (United States)

    Diamant, Ruth; Garcí-Valenzuela, Augusto; Fernández-Guasti, Manuel

    2012-09-01

    Reflectivity of a random monolayer, consisting of transparent spherical particles, is estimated using a graded refractive index model, an effective medium approach, and two scattering models. Two cases, a self-standing film and one with a substrate, are considered. Neither the surrounding medium nor the substrate are absorbing materials. Results at normal incidence, with different particle sizes, covering ratios and refractive indexes, are compared. The purpose of this work is to find under which circumstances, for reflectivity at normal incidence, a particle monolayer behaves as a graded refractive index film.

  15. Interferometer for Measuring Fast Changes of Refractive Index and Temperature in Transparent Liquids

    DEFF Research Database (Denmark)

    Miller, Arne; Hussmann, E. K.; McLaughlin, W. L.

    1975-01-01

    A double‐beam interferometer has been designed for detecting changes of refractive index in transparent liquids associated with the absorption of ionizing radiation energy, due to short electron beam pulses from an accelerator. The response time of the interferometer is less than 0.2 μsec......, and refractive index changes of the order of 10−7 can be measured, corresponding to a temperature change of ∼10−3  °C and an absorbed dose in water of ∼350 rad. The interferometer can be used as either a real‐time or integrating radiation dosimeter, if the temperature coefficient of the refractive index (dn...

  16. Pump-induced refractive index modulation and dispersions in Er3+-doped fibers

    DEFF Research Database (Denmark)

    Thirstrup, Carsten; Shi, Yuan

    1996-01-01

    to experimental results apart from a wavelength independent offset. The offset is interpreted to originate from high energetic optical transitions. The results show that for a large refractive index modulation, a short and highly doped fiber should be used with limited amplified spontaneous emission effect....... The analysis contains measurements of pump induced refractive index changes as function of wavelength, pump power, and doping concentration. A model taking account of the contribution to the refractive index changes from optical transitions between 4 I15/2 states and 4I13/2 states in Er3+ yields good agreement...

  17. Modeling of quasi-guiding light within the lower refractive index core layer(s)

    NARCIS (Netherlands)

    Uranus, H.P.; Hoekstra, Hugo; van Groesen, Embrecht W.C.

    2005-01-01

    It is well known that light can be guided within layer(s) having refractive index higher than that of the surroundings by means of the total internal reflection principles. However, using a proper structure, light can also be quasi-confined into layer(s) with refractive indices lower than the

  18. Simulation of imperfections in plastic lenses - transferring local refractive index changes into surface shape modifications

    Science.gov (United States)

    Arasa, Josep; Pizarro, Carles; Blanco, Patricia

    2016-06-01

    Injection molded plastic lenses have continuously improved their performance regarding optical quality and nowadays are as usual as glass lenses in image forming devices. However, during the manufacturing process unavoidable fluctuations in material density occur, resulting in local changes in the distribution of refractive index, which degrade the imaging properties of the polymer lens. Such material density fluctuations correlate to phase delays, which opens a path for their mapping. However, it is difficult to transfer the measured variations in refractive index into conventional optical simulation tool. Thus, we propose a method to convert the local variations in refractive index into local changes of one surface of the lens, which can then be described as a free-form surface, easy to introduce in conventional simulation tools. The proposed method was tested on a commercial gradient index (GRIN) lens for a set of six different object positions, using the MTF sagittal and tangential cuts to compare the differences between the real lens and a lens with homogenous refractive index, and the last surface converted into a free-form shape containing the internal refractive index changes. The same procedure was used to reproduce the local refractive index changes of an injected plastic lens with local index changes measured using an in-house built polariscopic arrangement, showing the capability of the method to provide successful results.

  19. Characterization and simulation on antireflective coating of amorphous silicon oxide thin films with gradient refractive index

    Science.gov (United States)

    Huang, Lu; Jin, Qi; Qu, Xingling; Jin, Jing; Jiang, Chaochao; Yang, Weiguang; Wang, Linjun; Shi, Weimin

    2016-08-01

    The optical reflective properties of silicon oxide (SixOy) thin films with gradient refractive index are studied both theoretically and experimentally. The thin films are widely used in photovoltaic as antireflective coatings (ARCs). An effective finite difference time domain (FDTD) model is built to find the optimized reflection spectra corresponding to structure of SixOy ARCs with gradient refractive index. Based on the simulation analysis, it shows the variation of reflection spectra with gradient refractive index distribution. The gradient refractive index of SixOy ARCs can be obtained in adjustment of SiH4 to N2O ratio by plasma-enhanced chemical vapor deposition (PECVD) system. The optimized reflection spectra measured by UV-visible spectroscopy confirms to agree well with that simulated by FDTD method.

  20. On-column refractive-index detection based on retroreflected beam interference for capillary electrophoresis.

    Science.gov (United States)

    Deng, Y; Li, B

    1998-02-20

    A novel refractive-index detection scheme used for capillary electrophoresis detection, based on the interference of two retroreflected beams from the outer surface of a capillary tube illuminated by a focused laser beam, is described. A theoretical description and experimental measurement of the intensity profile of the interference fringe pattern in the detection plane are presented. The factors that limit the sensitivity of the proposed refractive-index detection scheme are discussed and compared with the transmitted beam interference and backscatter-based refractive-index detection configurations. The proposed refractive-index detector was used successfully for detection of capillary electrophoresis separations of saccharose, maltose, and lactose with a capillary tube of 50-mum inner diameter and a simple experimental setup.

  1. Spectral Intensity Variation by the Correlation Function of Refractive Index Fluctuations of the Liquid Medium

    Directory of Open Access Journals (Sweden)

    Nageshwar Singh

    2013-01-01

    Full Text Available It is proposed that a macroscopic theory of propagation and scattering of light through random media can be functional for the dye liquid flowing media in the microscopic levels too, with modest approximations. Maxwell’s equation for a random refractive index medium is approximated and solved for the electric field. An analytical expression for the spectral intensity of the field scattered by the refractive index fluctuations inside a medium has been derived which was valid within the first Born approximation. Far field spectral intensity variation of the radiation propagating through the liquid medium is a consequence of variation in correlation function of the refractive index inhomogeneities. The strength of radiation scattered in a particular direction depends on the spatial correlation function of the refractive index fluctuations of the medium. An attempt is made to explain some of the experimentally observed spectral intensity variations, particularly dye emission propagation through liquid flowing medium, in the presence of thermal and flow field.

  2. The iterative self-consistent reaction-field method: The refractive index of pure water

    DEFF Research Database (Denmark)

    Sylvester-Hvid, Kristian O.; Mikkelsen, K. V.; Ratner, M.A.

    2011-01-01

    We present different microscopic models for describing electromagnetic properties of condensed phases and the models involve iterative self-consistent procedures for calculating the properties. We report calculations of the frequency-dependent refractive index of pure water. We investigate...

  3. Study of the refractive index of gasoline+alcohol pseudo-binary mixtures

    Directory of Open Access Journals (Sweden)

    Nita Irina

    2017-02-01

    Full Text Available The properties of gasoline change as a result of blending with a bioalcohol, affecting the behavior of the pseudo-binary system. The aim of this paper is to present experimental data of the refractive index for pseudobinary mixtures of a reformate gasoline with ethanol, isopropanol and n-butanol over the entire composition range and for temperature ranging from 293.15 K to 313.15 K. The accuracy of different equations to predict the refractive index of the mixtures was tested. The best prediction accuracy (the lower AAD corresponded to Eykman and Lorentz-Lorenz mixing rules. A logarithmic equation proposed to correlate the refractive index with composition and temperature of gasoline+alcohol mixtures showed a good accuracy (the absolute average deviation AAD < 0.052%. The deviations in refractive index for investigated systems are negative over the entire composition range and at all investigated temperatures.

  4. Fabrication of the durable low refractive index thin film with chitin-nanofiber by LBL method

    Directory of Open Access Journals (Sweden)

    Tanaka C.

    2013-08-01

    Full Text Available Durable low refractive index thin films with anti-reflection properties were successfully fabricated using chitin nanofibers (CHINF obtained from crab shell. The low refractive index film was achieved by forming porous thin films; the porosity was produced by increasing the number of airspaces inside the membrane. The layer-by-layer (LBL method was used to achieve the effective stacking of the CHINF. The influence of surface structure and refractive index under changes in the solution pH was investigated using scanning electron microscopy and ellipsometry. Transmittance of the fabricated film is 4.1 % higher than that of a glass substrate and refractive index film of that is 1.29. The films had abrasion resistance and antifogging properties because of the high mechanical strength and hydrophilicity of chitin. We believe this LBL film using CHINF is a promising candidate material to overcome the durability problems associated with optical thin films.

  5. Surface antireflection properties of GaN nanostructures with various effective refractive index profiles.

    Science.gov (United States)

    Han, Lu; Zhao, Hongping

    2014-12-29

    GaN nanostructures with various effective refractive index profiles (Linear, Cubic, and Quintic functions) were numerically studied as broadband omnidirectional antireflection structures for concentrator photovoltaics by using three-dimensional finite difference time domain (3D-FDTD) method. Effective medium theory was used to design the surface structures corresponding to different refractive index profiles. Surface antireflection properties were calculated and analyzed for incident light with wavelength, polarization and angle dependences. The surface antireflection properties of GaN nanostructures based on six-sided pyramid with both uniform and non-uniform patterns were also investigated. Results indicate a significant dependence of the surface antireflection on the refractive index profiles of surface nanostructures as well as their pattern uniformity. The GaN nanostructures with linear refractive index profile show the best performance to be used as broadband omnidirectional antireflection structures.

  6. Whispering-gallery modes observed in elastic scattering from submerged high-refractive-index silica microspheres

    Science.gov (United States)

    Yılmaz, Hasan; Yılmaz, Huzeyfe; Tamer, Mehmet Selman; Gürlü, Oǧuzhan; Murib, Mohammed Sharif; Serpengüzel, Ali

    2017-12-01

    The effect of the discrete values of the refractive index of the surrounding medium on the spectral behavior of the whispering-gallery modes (WGMs) in the elastic scattering spectra of high-refractive-index silica microspheres submerged in fluids, such as air, water, and glycerol, is studied. The elastic scattering spectral measurements, as well as the spectral autocorrelation analysis of these elastic scattering spectra show that the spectral-mode spacing, the spectral-mode density, and the spectral-mode definition of the WGMs decrease as the refractive index of the surrounding fluid increases. We believe that this work opens up the way for optofluidic applications of high-refractive-index silica microsphere-based guided wave optics.

  7. Measurement of Linear Coefficient of Thermal Expansion and Temperature-Dependent Refractive Index Using Interferometric System

    Science.gov (United States)

    Corsetti, James A.; Green, William E.; Ellis, Jonathan D.; Schmidt, Greg R.; Moore, Duncan T.

    2017-01-01

    A system combining an interferometer with an environmental chamber for measuring both coefficient of thermal expansion (CTE) and temperature-dependent refractive index (dn/dT) simultaneously is presented. The operation and measurement results of this instrument are discussed.

  8. Average value of the shape and direction factor in the equation of refractive index

    Science.gov (United States)

    Zhang, Tao

    2017-10-01

    The theoretical calculation of the refractive indices is of great significance for the developments of new optical materials. The calculation method of refractive index, which was deduced from the electron-cloud-conductor model, contains the shape and direction factor 〈g〉. 〈g〉 affects the electromagnetic-induction energy absorbed by the electron clouds, thereby influencing the refractive indices. It is not yet known how to calculate 〈g〉 value of non-spherical electron clouds. In this paper, 〈g〉 value is derived by imaginatively dividing the electron cloud into numerous little volume elements and then regrouping them. This paper proves that 〈g〉 = 2/3 when molecules’ spatial orientations distribute randomly. The calculations of the refractive indices of several substances validate this equation. This result will help to promote the application of the calculation method of refractive index.

  9. Optical waveguides with compound multiperiodic grating nanostructures for refractive index sensing

    DEFF Research Database (Denmark)

    Neustock, Lars Thorben; Jahns, Sabrina; Adam, Jost

    2016-01-01

    compound multiperiodic nanostructured waveguides for refractive index sensing. Simulations are carried out with the Rigorous Coupled Wave Algorithm (RCWA). The resulting spectra, resonance sensitivities and quality factors are compared to monoperiodic as well as to three selected aperiodic nanostructures...... (Rudin-Shapiro, Fibonacci, Thue-Morse). The refractive index sensitivity of the TE-resonances is similar for all types of investigated nanostructures. For the TM-resonances the compound multiperiodic nanostructures exhibit higher sensitivity values compared to the monoperiodic nanostructure and similar...

  10. Periodic refractive index modifications inscribed in polymer optical fibre by focussed IR femtosecond pulses

    DEFF Research Database (Denmark)

    Stecher, Matthias; Williams, Robert J.; Bang, Ole

    Focussed femtosecond laser pulses were used to inscribe a periodic array of modifications in the core of a polymer optical fibre. Structural and refractive-index modifications have been observed at different pulse energies using DIC microscopy.......Focussed femtosecond laser pulses were used to inscribe a periodic array of modifications in the core of a polymer optical fibre. Structural and refractive-index modifications have been observed at different pulse energies using DIC microscopy....

  11. Measurement of refractive index of biaxial potassium titanyl ...

    Indian Academy of Sciences (India)

    The paper reports the measurement of refractive indices and anisotropic absorption coefficients of biaxial potassium titanyl phosphate (KTP) crystal in the form of thin plate using reflection ellipsometry technique. This experiment is designed in the Graduate Optics Laboratory of the Addis Ababa University and He–Ne laser ...

  12. Application of refractive index mixing rules in binary systems of ...

    Indian Academy of Sciences (India)

    Unknown

    expressed in terms of average percentage deviation. The performance of the Lorentz– ... of these mixing rules is their inability to account for changes in volume and refractivity during mixing as they are based ..... symmetrical shape and it proposes volume additivity which is the reason for the deviations obtained in case of ...

  13. Application of refractive index mixing rules in binary systems of ...

    Indian Academy of Sciences (India)

    Unknown

    , n1 and n2 are the refractive indices of the pure components respectively, φ1 and φ2 are volume fractions. The volume fraction φ may be obtained from φ1 = x1v1/∑x1v1, where x is the mole fraction and v is the molar volume of component i.

  14. Measurement of refractive index of biaxial potassium titanyl ...

    Indian Academy of Sciences (India)

    perimental data of refractive indices are compared with different existing theoretical and experimental values of KTP crystals and ... Moreover, the optical quality of the sur- face should also be very good. ... of KTP films from spectroscopic ellipsometry data either by direct de-convolution or by least square fitting technique and ...

  15. Measurement of refractive index of biaxial potassium titanyl ...

    Indian Academy of Sciences (India)

    Abstract. The paper reports the measurement of refractive indices and anisotropic ab- sorption coefficients of biaxial potassium titanyl phosphate (KTP) crystal in the form of thin plate using reflection ellipsometry technique. This experiment is designed in the. Graduate Optics Laboratory of the Addis Ababa University and ...

  16. Estimated refractive index and solid density of DT, with application to hollow-microsphere laser targets

    International Nuclear Information System (INIS)

    Briggs, C.K.; Tsugawa, R.T.; Hendricks, C.D.; Souers, P.C.

    1975-01-01

    The literature values for the 0.55-μm refractive index N of liquid and gaseous H 2 and D 2 are combined to yield the equation (N - 1) = [(3.15 +- 0.12) x 10 -6 ]rho, where rho is the density in moles per cubic meter. This equation can be extrapolated to 300 0 K for use on DT in solid, liquid, and gas phases. The equation is based on a review of solid-hydrogen densities measured in bulk and also by diffraction methods. By extrapolation, the estimated densities and 0.55-μm refractive indices for DT are given. Radiation-induced point defects could possibly cause optical absorption and a resulting increased refractive index in solid DT and T 2 . The effect of the DT refractive index in measuring glass and cryogenic DT laser targets is also described

  17. Comparable change in stromal refractive index of cat and human corneas following blue-IRIS

    Science.gov (United States)

    Wozniak, Kaitlin T.; Gearhart, Sara M.; Savage, Daniel E.; Ellis, Jonathan D.; Knox, Wayne H.; Huxlin, Krystel R.

    2017-05-01

    Blue intratissue refractive index shaping (blue-IRIS) is a method with potential to correct ocular refraction noninvasively in humans. To date, blue-IRIS has only ever been applied to cat corneas and hydrogels. To test the comparability of refractive index change achievable in cat and human tissues, we used blue-IRIS to write identical phase gratings in ex vivo feline and human corneas. Femtosecond pulses (400 nm) were focused ˜300 μm below the epithelial surface of excised cat and human corneas and scanned to write phase gratings with lines ˜1 μm wide, spaced 5 μm apart, using a scan speed of 5 mm/s. Additional cat corneas were used to test writing at 3 and 7 mm/s in order to document speed dependence of the refractive index change magnitude. The first-order diffraction efficiency was immediately measured and used to calculate the refractive index change attained. Our data show that blue-IRIS induces comparable refractive index changes in feline and human corneas, an essential requirement for further developing its use as a clinical vision correction technique.

  18. Determination of distribution function of refraction index and anion diffusion depth in porous alumina photonic crystals

    Directory of Open Access Journals (Sweden)

    H. Kaviani

    2007-09-01

    Full Text Available   Band structure of porous alumina photonic crystal in the Γ X direction was calculated using order-N method . In a comparison of calculated results with experimental data of reflective and absorptive index, the variation of refractive index of alumina in the external region of oxide layer, around the pores were studied. A Gaussian distribution function was adopted for phosphate anions in the external oxide layer and the variation of refractive index and diffusion depth were determined. The structure of the first four bands was calculated using the obtained distribution of refractive index in the external oxide layer for both TE and TM mode. This results show a narrow full band gap in the TM mode.

  19. Ultrasensitive refractive index sensor based on twin-core photonic bandgap fibers

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Town, Graham E.; Bang, Ole

    We have theoretically investigated twin-core all-solid photonic bandgap fibers (PBGFs) for evanescent wave sensing of refractive index within one single microfluidic analyte channel centered between the two cores. The sensor can achieve ultrahigh sensitivity by detecting the change in transmission....... We find novel features in the sensing characteristics: the sensitivity is higher at the short wavelength edge of a bandgap than at the long wavelength edge, the effective index of the odd supermode (nodd) is more sensitive to ambient refractive index change compared with that of the even supermode...

  20. Options for refractive index and viscosity matching to study variable density flows

    Science.gov (United States)

    Clément, Simon A.; Guillemain, Anaïs; McCleney, Amy B.; Bardet, Philippe M.

    2018-02-01

    Variable density flows are often studied by mixing two miscible aqueous solutions of different densities. To perform optical diagnostics in such environments, the refractive index of the fluids must be matched, which can be achieved by carefully choosing the two solutes and the concentration of the solutions. To separate the effects of buoyancy forces and viscosity variations, it is desirable to match the viscosity of the two solutions in addition to their refractive index. In this manuscript, several pairs of index matched fluids are compared in terms of viscosity matching, monetary cost, and practical use. Two fluid pairs are studied in detail, with two aqueous solutions (binary solutions of water and a salt or alcohol) mixed into a ternary solution. In each case: an aqueous solution of isopropanol mixed with an aqueous solution of sodium chloride (NaCl) and an aqueous solution of glycerol mixed with an aqueous solution of sodium sulfate (Na_2SO_4). The first fluid pair allows reaching high-density differences at low cost, but brings a large difference in dynamic viscosity. The second allows matching dynamic viscosity and refractive index simultaneously, at reasonable cost. For each of these four solutes, the density, kinematic viscosity, and refractive index are measured versus concentration and temperature, as well as wavelength for the refractive index. To investigate non-linear effects when two index-matched, binary solutions are mixed, the ternary solutions formed are also analyzed. Results show that density and refractive index follow a linear variation with concentration. However, the viscosity of the isopropanol and NaCl pair deviates from the linear law and has to be considered. Empirical correlations and their coefficients are given to create index-matched fluids at a chosen temperature and wavelength. Finally, the effectiveness of the refractive index matching is illustrated with particle image velocimetry measurements performed for a buoyant jet in a

  1. Multiple Fano-Like MIM Plasmonic Structure Based on Triangular Resonator for Refractive Index Sensing

    OpenAIRE

    Jankovic, Nikolina; Cselyuszka, Norbert

    2018-01-01

    In this paper, we present a Fano metal-insulator-metal (MIM) structure based on an isosceles triangular cavity resonator for refractive index sensing applications. Due to the specific feeding scheme and asymmetry introduced in the triangular cavity, the resonator exhibits four sharp Fano-like resonances. The behavior of the structure is analyzed in detail and its sensing capabilities demonstrated through the responses for various refractive indices. The results show that the sensor has very g...

  2. Refractive Index of a Transparent Liquid Measured with a Concave Mirror

    Science.gov (United States)

    Joshi, Amitabh; Serna, Juan D.

    2012-01-01

    Measuring the refractive index "n" of a substance or medium is part of every introductory physics course. Various approaches to determine this index have been developed over the years based on the different ways light reflects and transmits in the medium. In this paper, the authors would like to present a simple geometrical derivation of the…

  3. An empirical method to estimate bulk particulate refractive index for ocean satellite applications

    Digital Repository Service at National Institute of Oceanography (India)

    Suresh, T.; Desa, E.; Mascarenhas, A.A.M.Q.; Matondkar, S.G.P.; Naik, P.; Nayak, S.R.

    . Algorithms with the IRS-P4 OCM satellite data was used and derived the refractive index image. The values of indexes are found to be lower for the open ocean and relatively higher for the coastal waters. Distinct features are observed even...

  4. Engineering of refractive index in sulfide chalcogenide glass by direct laser writing

    KAUST Repository

    Zhang, Yaping

    2010-01-01

    Arsenic trisulfide (As2S3) glass is an interesting material for photonic integrated circuits (PICs) as infrared (IR) or nonlinear optical components. In this paper, direct laser writing was applied to engineer the refractive index of As2S3 thin film. Film samples were exposed to focused above bandgap light with wavelength at 405 nm using different fluence adjusted by laser power and exposure time. The index of refraction before and after laser irradiation was calculated by fitting the experimental data obtained from Spectroscopic Ellipsometer (SE) measurement to Tauc-Lorenz dispersion formula. A positive change in refractive index (Δn = 0.19 at 1.55 μm) as well as an enhancement in anisotropy was achieved in As2S3 film by using 10 mW, 0.3 μs laser irradiation. With further increasing the fluence, refractive index increased while anisotropic property weakened. Due to the rapid and large photo-induced modification of refractive index obtainable with high spatial resolution, this process is promising for integrated optic device fabrication.

  5. GaAs Refractive Index Dependence On Carrier Density and Optimizing Terahertz Devices

    Science.gov (United States)

    Kim, Christopher; Wu, Dong Ho; Graber, Benjamin

    GaAs is used for various applications, including high speed transistors, high-efficiency photovoltaic cells, electro-optics and terahertz (THz) emitters and detectors. To date, information on the refractive index of GaAs is available only over a limited wave spectrum of 0.2-17um, where the refractive index varies from 1.3 to 5.0. As detailed information on the refractive index of GaAs at THz frequencies is not available or inadequate for our effort to develop an improved GaAs-based THz emitter, we experimentally investigated the behavior of the refractive index of GaAs for different charge carrier densities, especially with or without the presence of surface plasma. Using a Time Domain THz Spectrometer, which is capable of measuring THz pulses containing a wave spectrum over 100-3000um with a time accuracy better than 6 femtoseconds, we measured the delay of THz pulses traversing through a GaAs substrate of known thickness while modulating the charge carrier concentration. From the experimental data we estimated the refractive index for THz frequencies to vary from 3.5 to 3.8 for different charge carrier concentrations. We will discuss details of our experiments and implications of our experimental results, especially for our GaAs-based THz devices.

  6. The Complex Refractive Index of Volcanic Ash Aerosol Retrieved From Spectral Mass Extinction

    Science.gov (United States)

    Reed, Benjamin E.; Peters, Daniel M.; McPheat, Robert; Grainger, R. G.

    2018-01-01

    The complex refractive indices of eight volcanic ash samples, chosen to have a representative range of SiO2 contents, were retrieved from simultaneous measurements of their spectral mass extinction coefficient and size distribution. The mass extinction coefficients, at 0.33-19 μm, were measured using two optical systems: a Fourier transform spectrometer in the infrared and two diffraction grating spectrometers covering visible and ultraviolet wavelengths. The particle size distribution was measured using a scanning mobility particle sizer and an optical particle counter; values for the effective radius of ash particles measured in this study varied from 0.574 to 1.16 μm. Verification retrievals on high-purity silica aerosol demonstrated that the Rayleigh continuous distribution of ellipsoids (CDEs) scattering model significantly outperformed Mie theory in retrieving the complex refractive index, when compared to literature values. Assuming the silica particles provided a good analogue of volcanic ash, the CDE scattering model was applied to retrieve the complex refractive index of the eight ash samples. The Lorentz formulation of the complex refractive index was used within the retrievals as a convenient way to ensure consistency with the Kramers-Kronig relation. The short-wavelength limit of the electric susceptibility was constrained by using independently measured reference values of the complex refractive index of the ash samples at a visible wavelength. The retrieved values of the complex refractive indices of the ash samples showed considerable variation, highlighting the importance of using accurate refractive index data in ash cloud radiative transfer models.

  7. Tunable Liquid Gradient Refractive Index (L-GRIN) lens with two degrees of freedom.

    Science.gov (United States)

    Mao, Xiaole; Lin, Sz-Chin Steven; Lapsley, Michael Ian; Shi, Jinjie; Juluri, Bala Krishna; Huang, Tony Jun

    2009-07-21

    We report a tunable optofluidic microlens configuration named the Liquid Gradient Refractive Index (L-GRIN) lens for focusing light within a microfluidic device. The focusing of light was achieved through the gradient refractive index (GRIN) within the liquid medium, rather than via curved refractive lens surfaces. The diffusion of solute (CaCl(2)) between side-by-side co-injected microfluidic laminar flows was utilized to establish a hyperbolic secant (HS) refractive index profile to focus light. Tailoring the refractive index profile by adjusting the flow conditions enables not only tuning of the focal distance (translation mode), but also shifting of the output light direction (swing mode), a second degree of freedom that to our knowledge has yet to be accomplished for in-plane tunable microlenses. Advantages of the L-GRIN lens also include a low fluid consumption rate, competitive focusing performance, and high compatibility with existing microfluidic devices. This work provides a new strategy for developing integrative tunable microlenses for a variety of lab-on-a-chip applications.

  8. Efficient approximations of dispersion relations in optical waveguides with varying refractive-index profiles.

    Science.gov (United States)

    Li, Yutian; Zhu, Jianxin

    2015-05-04

    In this paper we consider the problem of computing the eigen-modes for the varying refractive-index profile in an open waveguide. We first approximate the refractive-index by a piecewise polynomial of degree two, and the corresponding Sturm-Liouville problem (eigenvalue problem) of the Helmholtz operator in each layer can be solved analytically by the Kummer functions. Then, analytical approximate dispersion equations are established for both TE and TM cases. Furthermore, the approximate dispersion equations converge fast to the exact ones for the continuous refractive-index function as the maximum value of the subinterval sizes tends to zero. Suitable numerical methods, such as Müller's method or the chord secant method, may be applied to the dispersion relations to compute the eigenmodes. Numerical simulations show that our method is very practical and efficient for computing eigenmodes.

  9. Hybrid optical fiber Fabry-Perot interferometer for simultaneous measurement of gas refractive index and temperature.

    Science.gov (United States)

    Wang, Ruohui; Qiao, Xueguang

    2014-11-10

    We present a hybrid miniature optical fiber Fabry-Perot interferometer for simultaneous measurement of gas refractive index and temperature. The interferometer is fabricated by cascading two short sections of capillary tubes with different inner diameters. One extrinsic interferometer is based on the air gap cavity formed by the capillary tube with large diameter. Another section of capillary tube with small inner diameter performs as an intrinsic interferometer and also provides a channel enabling gas to enter and leave the extrinsic cavity freely. The experiment shows that the different dips or peaks in fringe exhibit different responses to the changes in gas refractive index and temperature. Owing to this feature, simultaneous measurement of the gas refractive index and temperature can be realized.

  10. Spectral dependence of the refractive index of single-crystalline GaAs for optical applications

    International Nuclear Information System (INIS)

    Plotnichenko, V G; Nazaryants, V O; Kryukova, E B; Dianov, E M

    2010-01-01

    The refractive index of crystalline GaAs is measured by the method of interference refractometry in the wavenumber range from 10 500 to 540 cm -1 (or the wavelength range from 0.9 to 18.6 μm) with a resolution of 0.1 cm -1 . The measurement results are approximated by the generalized Cauchy dispersion formula of the 8th power. Spectral wavelength dependences of the first- and second-order derivatives of the refractive index are calculated, and the zero material dispersion wavelength is found to be λ 0 = 6.61 μm. Using three GaAs plates of different thicknesses we managed to raise the refractive index measurement accuracy up to 4 x 10 -4 or 0.02%, being nearly by an order of magnitude better than the data available.

  11. Spectral dependence of the refractive index of single-crystalline GaAs for optical applications

    Energy Technology Data Exchange (ETDEWEB)

    Plotnichenko, V G; Nazaryants, V O; Kryukova, E B; Dianov, E M, E-mail: victor@fo.gpi.ac.r [Fibre Optics Research Center of the Russian Academy of Sciences, 38 Vavilov Street, Moscow 119333 (Russian Federation)

    2010-03-17

    The refractive index of crystalline GaAs is measured by the method of interference refractometry in the wavenumber range from 10 500 to 540 cm{sup -1} (or the wavelength range from 0.9 to 18.6 {mu}m) with a resolution of 0.1 cm{sup -1}. The measurement results are approximated by the generalized Cauchy dispersion formula of the 8th power. Spectral wavelength dependences of the first- and second-order derivatives of the refractive index are calculated, and the zero material dispersion wavelength is found to be {lambda}{sub 0} = 6.61 {mu}m. Using three GaAs plates of different thicknesses we managed to raise the refractive index measurement accuracy up to 4 x 10{sup -4} or 0.02%, being nearly by an order of magnitude better than the data available.

  12. Suppression of Air Refractive Index Variations in High-Resolution Interferometry

    Directory of Open Access Journals (Sweden)

    Zdeněk Buchta

    2011-08-01

    Full Text Available The influence of the refractive index of air has proven to be a major problem on the road to improvement of the uncertainty in interferometric displacement measurements. We propose an approach with two counter-measuring interferometers acting as a combination of tracking refractometer and a displacement interferometer referencing the wavelength of the laser source to a mechanical standard made of a material with ultra-low thermal expansion. This technique combines length measurement within a specified range with measurement of the refractive index fluctuations in one axis. Errors caused by different position of the interferometer laser beam and air sensors are thus eliminated. The method has been experimentally tested in comparison with the indirect measurement of the refractive index of air in a thermal controlled environment. Over a 1 K temperature range an agreement on the level of 5 × 10−8 has been achieved.

  13. Estimating index of refraction for material identification in comparison to existing temperature emissivity separation algorithms

    Science.gov (United States)

    Martin, Jacob A.; Gross, Kevin C.

    2016-05-01

    As off-nadir viewing platforms become increasingly prevalent in remote sensing, material identification techniques must be robust to changing viewing geometries. Current identification strategies generally rely on estimating reflectivity or emissivity, both of which vary with viewing angle. Presented here is a technique, leveraging polarimetric and hyperspectral imaging (P-HSI), to estimate index of refraction which is invariant to viewing geometry. Results from a quartz window show that index of refraction can be retrieved to within 0.08 rms error from 875-1250 cm-1 for an amorphous material. Results from a silicon carbide (SiC) wafer, which has much sharper features than quartz glass, show the index of refraction can be retrieved to within 0.07 rms error. The results from each of these datasets show an improvement when compared with a maximum smoothness TES algorithm.

  14. Refractive index dispersion sensing using an array of photonic crystal resonant reflectors

    Energy Technology Data Exchange (ETDEWEB)

    Hermannsson, Pétur G.; Vannahme, Christoph; Smith, Cameron L. C.; Sørensen, Kristian T.; Kristensen, Anders, E-mail: anders.kristensen@nanotech.dtu.dk [Department of Micro- and Nanotechnology, Technical University of Denmark, Ørsteds Plads, Building 345E, DK-2800 Kgs. Lyngby (Denmark)

    2015-08-10

    Refractive index sensing plays a key role in various environmental and biological sensing applications. Here, a method is presented for measuring the absolute refractive index dispersion of liquids using an array of photonic crystal resonant reflectors of varying periods. It is shown that by covering the array with a sample liquid and measuring the resonance wavelength associated with transverse electric polarized quasi guided modes as a function of period, the refractive index dispersion of the liquid can be accurately obtained using an analytical expression. This method is compact, can perform measurements at arbitrary number of wavelengths, and requires only a minute sample volume. The ability to sense a material's dispersion profile offers an added dimension of information that may be of benefit to optofluidic lab-on-a-chip applications.

  15. Liquid refractive index sensor based on a 2D 10-fold photonic quasicrystal

    Science.gov (United States)

    Wang, Shuai; Sun, XiaoHong; Wang, Cong; Peng, Gangding; Qi, Yongle; Wang, XiShi

    2017-09-01

    A liquid refractive index sensor is designed and optimized by using silicon-rods based on a 10-fold photonic quasicrystal without defects. The resonant mode with high Q value is chosen as the sensing wavelength in the transmission spectrum. By changing the radius of the silicon pillars, the sensor size and the refractive index of the background media, different types of sensors are designed and investigated. On the other hand, the performance of the sensor is investigated including the measurement range, sensitivity, etc. In the detection limit of spectral instruments, 0.02 nm, the sensing accuracy is 10-4 refractive index unit with a figure of merit of 1478. The measurement range is from 1.2731 to 1.4185. This will provide a new method for the design and fabrication of lab-on-chip, microfluidic optical elements and integrated optical circuits.

  16. Determination of femtosecond-laser-induced refractive-index changes in an optical fiber from far-field measurements

    DEFF Research Database (Denmark)

    Savolainen, Juha-Matti; Grüner-Nielsen, Lars; Kristensen, Poul

    2014-01-01

    A new method for direct writing of localized, circularly symmetric refractive-index changes in optical fibers with a femtosecond laser is demonstrated. The refractive-index changes are characterized using a novel approach employing comparison of numerical simulations to the measured far......-field profiles of unmodified and modified fibers. From the analysis, a negative refractive-index change of −0.015 0.005 within a radius of 0.6 0.1 μm is determined....

  17. Influence of the refractive index core profile on modal scattering of terminated two-dimensional waveguides.

    Science.gov (United States)

    Koukoutsaki, Panagiota A; Dasyras, Nikolaos F; Tigelis, Ioannis G; Manenkov, Alexander B; Amditis, Angelos J

    2007-06-01

    We examine the influence of the refractive index core profile on the modal scattering of abruptly terminated slab waveguides. The analysis is based on the integral equation method with accelerating parameters, while for the field description in the waveguide core, an appropriate Lanczos-Fourier expansion is employed. The electric-field distribution on the terminal plane, the reflection and transformation coefficient of the TE guided modes, and the far-field radiation pattern are computed. Numerical results are presented for slab waveguides with step, linear, and parabolic refractive index profiles of the core. Finally, several approximate analytical solutions are derived to study the problem in question and to explain the results obtained.

  18. Influence of Urea Concentration on Refractive Index of AdBlue fluid Evaluated by Regression Analysis

    OpenAIRE

    Adam Polcar; Jiří Čupera; Vojtěch Kumbár; Petr Dostál; Jiří Votava

    2016-01-01

    The article deals with the influence urea concentration in the AdBlue fluid on the refractive index. The AdBlue fluid is an aqueous solution of urea and demineralized water. It is used as a reducing agent for SCR (Selective Catalytic Reduction) system. Due to temperature fluctuation of AdBlue during the measurement of refractive index, the multi-dimensional linear regression had to be used to determine the effect of the two factors – concentration and temperature. This article describes in de...

  19. A new wideband negative refractive index metamaterial for dual-band operation

    Science.gov (United States)

    Islam, S. S.; Faruque, M. R. I.; Islam, M. T.; Ali, M. T.

    2017-04-01

    A new wideband negative refractive index (NRI) metamaterial for dual-band operation is introduced in this study. Initially, a bare-H-shaped resonator was designed over the FR-4 substrate material. The refractive index curve for the unit cell, displays more than 3-GHz negative real peak from C-band to some portion of X-band. The proposed design also displays NRI property in the same frequency bands with wider bandwidth, when the Rogers RT 3010 substrate material was employed instead of FR-4 substrate material.

  20. Capillary-scale interferometry at high angles of scattering for refractive index measurements of small volumes

    Science.gov (United States)

    Świrniak, Grzegorz

    2016-04-01

    This paper focuses on the problem of elastic scattering of a collimated beam of light on an unmodified glass capillary to perform a non-destructive small volume refractive index characterization. An interaction between the beam of light and the capillary causes that a series of dark and bright fringes is formed in the far field observed at high angles of scattering. By analyzing the spatial profile of the scattered light, the absolute value of the refractive index of a small volume may be measured unambiguously.

  1. "Peak-tracking chip" (PTC) for bulk refractive index sensing and bioarray sensing

    KAUST Repository

    Bougot-Robin, Kristelle

    2013-10-20

    Resonant techniques are of wide interest to detect variation of effective refractive index at a chip surface. Both Surface Plasmon Resonance (SPR) and dielectric resonant waveguide (RWGs) can be exploited. Through their design, RWGs allow more flexibility (size of the biomolecule to detect, detection angle…). Using specially designed RWG “Peak-tracking chip”, we propose to use spatial information from a simple monochromatic picture as a new label-free bioarray technique. We discuss robustness, sensitivity, multiplex detection, fluidic integration of the technique and illustrate it through bulk refractive index sensing as well as specific recognition of DNA fragment from gyrase A.

  2. Diffusion study in tailored gratings recorded in photopolymer glass with high refractive index species

    Science.gov (United States)

    Martínez-Matos, Óscar; Calvo, María L.; Rodrigo, José A.; Cheben, Pavel; del Monte, Francisco

    2007-10-01

    We report results on the temporal evolution of the diffraction efficiency of volume holographic gratings recorded in a photopolymer glass incorporating Zr-based high refractive index species (HRIS) at molecular level. We record high spatial frequency gratings in this material with diffraction efficiencies near 100%. A two-component diffusion model is introduced for the evolution of refractive index modulation in darkness. Diffusion parameters for the Zr-based HRIS and monomer components have been determined. Codirectional diffusion of both components is demonstrated. The results show the feasibility for tailoring in this photomaterial holographic gratings with high diffraction efficiency over a wide range of spatial frequencies.

  3. Reversing the direction of space and inverse Doppler effect in positive refraction index media

    Science.gov (United States)

    Sun, Fei; He, Sailing

    2017-01-01

    A negative refractive index medium, in which all spatial coordinates are reversed (i.e. a left-hand triplet is formed) by a spatial folding transformation, can create many novel electromagnetic phenomena, e.g. backward wave propagation, and inversed Doppler effect (IDE). In this study, we use coordinate rotation transformation to reverse only two spatial coordinates (e.g. x‧ and y‧), while keeping z‧ unchanged. In this case, some novel phenomena, e.g. radiation-direction-reversing illusions and IDE, can be achieved in a free space region wrapped by the proposed shell without any negative refractive index medium, which is easier for experimental realization and future applications.

  4. Process equipped with a sloped UV lamp for the fabrication of gradient-refractive-index lenses.

    Science.gov (United States)

    Liu, Jui-Hsiang; Chiu, Yi-Hong

    2009-05-01

    In this investigation, a method for the preparation of gradient-refractive-index (GRIN) lenses by UV-energy-controlled polymerization has been developed. A glass reaction tube equipped with a sloped UV lamp was designed. Methyl methacrylate and diphenyl sulfide were used as the reactive monomer and nonreactive dopant, respectively. Ciba IRGACURE 184 (1-hydroxy-cyclohexyl-phenyl-ketone) was used as the initiator. The effects of initiator concentration, the addition of acrylic polymers, and the preparation conditions on the optical characteristics of the GRIN lenses produced by this method were also investigated. Refractive index distributions and image transmission properties were estimated for all GRIN lenses prepared.

  5. Controlling the plasmon resonance wavelength in metal-coated probe using refractive index modification.

    Science.gov (United States)

    Taguchi, Atsushi; Hayazawa, Norihiko; Saito, Yuika; Ishitobi, Hidekazu; Tarun, Alvarado; Kawata, Satoshi

    2009-04-13

    We present a novel technique to tune the plasmon resonance of metal-coated silicon tips in the whole visible region without altering the tips original sharpness. The technique involves modification of the refractive index of silicon probe by thermal oxidization. Lowering the refractive index of silicon tip coated with metal shift the PRW of the metallic layer to shorter wavelength. Numerical simulation using FDTD agrees well with the empirical results. This novel technique is very useful in tip-enhanced Raman spectroscopy studies of various materials because plasmon resonance can tuned to a specific Raman excitation wavelength.

  6. Refractive index dispersion sensing using an array of photonic crystal resonant reflectors

    DEFF Research Database (Denmark)

    Hermannsson, Pétur Gordon; Vannahme, Christoph; Smith, Cameron

    2015-01-01

    Refractive index sensing plays a key role in various environmental and biological sensing applications. Here, a method is presented for measuring the absolute refractive index dispersion of liquids using an array of photonic crystal resonant reflectors of varying periods. It is shown...... perform measurements at arbitrary number of wavelengths, and requires only a minute sample volume. The ability to sense a material's dispersion profile offers an added dimension of information that may be of benefit to optofluidic lab-on-a-chip applications. © 2015 AIP Publishing LLC....

  7. Refractive index and geometrical thickness measurement of a transparent pellicle in air by Gaussian beam defocusing.

    Science.gov (United States)

    Olvera-R, Octavio; Cywiak, Moisés; Cervantes-L, Joel; Morales, Arquímedes

    2014-04-10

    We demonstrate that it is possible to measure the local geometrical thickness and the refractive index of a transparent pellicle in air by combining the diffractive properties of a Gaussian beam with the analytical equations of the light that propagates through a thin layer. We show that our measurement technique is immune to inherent piston-like vibrations present in the pellicle. As our measurements are based on characterizing properly the Gaussian beam in a plane of detection, a homodyne technique for this purpose is devised and described. The feasibility of our proposal is confirmed by measuring local geometrical thicknesses and the refractive index of a commercially available stretch film.

  8. Determination of the refractive index of glucose-ethanol-water mixtures using spectroscopic refractometry near the critical angle.

    Science.gov (United States)

    Sobral, H; Peña-Gomar, M

    2015-10-01

    A spectroscopic refractometer was used to investigate the dispersion curves of ethanol and D-glucose solutions in water near the critical angle; here, the reflectivity was measured using a white source. Dispersion curves were obtained in the 320-1000 nm wavelength range with a resolution better than 10(-4) for the refractive index, n. The differential refractive index is measured as a function of wavelength, and a simple expression is proposed to obtain the refractive index of the glucose-ethanol-water ternary system. Using this expression, combined with the experimental differential refractive index values, the concentrations of individual components can be calculated.

  9. Interferometric measurement of refractive index modification in a single mode microfiber

    Science.gov (United States)

    Ahmed, Farid; Ahsani, Vahid; Jun, Martin B. G.

    2017-02-01

    Efficient and cost effective measurement of the refractive index profile in an optical fiber is a significant technical job to design and manufacture in-fiber photonic devices and communication systems. For instance, to design fiber gratings, it is required to estimate the refractive index modulation to be inscribed by the fabrication apparatus such as ultraviolet or infrared lasers. Mach-Zehnder interferometer (MZI) based quantification of refractive index change written in single mode microfiber by femtosecond laser radiation is presented in this study. The MZI is constructed by splicing a microfiber (core diameter: 3.75 μm, cladding diameter: 40 μm) between standard single mode fibers. To measure the RI inscribed by infrared femtosecond laser, 200 μm length of the core within the MZI was scanned with laser radiation. As the higher index was written within 200 μm length of the core, the transmission spectrum of the interferometer displayed a corresponding red shift. The observed spectral shift was used to calculate the amount of refractive index change inscribed by the femtosecond irradiation. For the MZI length of 3.25 mm, and spectral shift of 0.8 nm, the calculated refractive index was found to be 0.00022. The reported results display excellent agreement between theory and experimental findings. Demonstrated method provides simple yet very effective on-site measurement of index change in optical fibers. Since the MZI can be constructed in diverse fiber types, this technique offers flexibility to quantify index change in various optical fibers.

  10. High-refractive index polyacrylates based on quinolinone-structures for intraocular lenses

    Science.gov (United States)

    Dams, Christian; Helmstetter, Simon; Hampp, Norbert

    2017-02-01

    Intraocular lenses (IOL) have experienced an expanding application over the last decades. Not only they can be used to cure cataract caused blindness, but they are also appointed to ease visual impairments (e.g. -18 - 10 dioptre or astigmatism).[1] These phake IOL require materials with very high refractive indices due to the limited space at the implanting position in the eye of the patient. This enables less invasive operations and such with smaller incisions.[2] Quinolinone derivates, like carbostyril, are currently known from drug design and as a main structural component of several antibiotics.[3] Although they show high refractive indices and good dispersions they have not yet been used in materials for ophthalmic applications. We synthesized and characterized novel high refractive index polymers containing quinolinones as the main refractive unit of the structure.[4] We showed that it was possible to build quinolinone polymers with high refractive indices up to 1.685 at 589 nm. Using this material it would theoretically be possible to reduce the lens thickness of an IOL to under 40 percent compared to a commercial hydrogel lens with a refractive index of 1.470. We also used the synthesized quinolinone acrylates to create hydrophobic copolymers with improved physical properties and high transmission in the visible spectral range. Besides the good lightfastness these copolymers also showed very low tendencies of glistening. In conclusion quinolinones show attractive performances for the usage as a component in acrylic copolymers. If the requirements for IOL keep rising in the coming years these monomers could be used to boost the refractive index of ophthalmic polymer compositions.

  11. Acoustic transmission line metamaterial with negative/zero/positive refractive index

    Science.gov (United States)

    Bongard, Frédéric; Lissek, Hervé; Mosig, Juan R.

    2010-09-01

    A one-dimensional acoustic negative refractive index metamaterial based on the transmission line approach is presented. This structure implements the dual transmission line concept extensively investigated in microwave engineering. It consists of an acoustic waveguide periodically loaded with membranes realizing the function of series “capacitances” and transversally connected open channels realizing shunt “inductances.” Transmission line based metamaterials can exhibit a negative refractive index without relying on resonance phenomena, which results in a bandwidth of operation much broader than that observed in resonant devices. In the present case, the negative refractive index band extends over almost one octave, from 0.6 to 1 kHz. The developed structure also exhibits a seamless transition between the negative and positive refractive index bands with a zero index at the transition frequency of 1 kHz. At this frequency, the unit cell is only one tenth of the wavelength. Simple acoustic circuit models are introduced, which allow efficient designs both in terms of dispersion and impedance, while accurately describing all the physical phenomena. Using this approach, a good matching at the structure terminations is achieved. Full-wave simulations, made for a 10-cell-long structure, confirm the good performances in terms of dispersion diagram, Bloch impedance, and reflection and transmission coefficients.

  12. Generation of J_0-Bessel-Gauss beam by a heterogeneous refractive index map

    KAUST Repository

    San Roman Alerigi, Damian

    2012-07-01

    In this paper, we present the theoretical studies of a refractive index map to implement a Gauss to a J0-Bessel-Gauss convertor. We theoretically demonstrate the viability of a device that could be fabricated on a Si/Si1-yOy/Si1-x-yGexCy platform or by photo-refractive media. The proposed device is 200 ?m in length and 25 ?m in width, and its refractive index varies in controllable steps across the light propagation and transversal directions. The computed conversion efficiency and loss are 90%, and -0.457 dB, respectively. The theoretical results, obtained from the beam conversion efficiency, self-regeneration, and propagation through an opaque obstruction, demonstrate that a two-dimensional (2D) graded index map of the refractive index can be used to transform a Gauss beam into a J0-Bessel-Gauss beam. To the best of our knowledge, this is the first demonstration of such beam transformation by means of a 2D index-mapping that is fully integrable in silicon photonics based planar lightwave circuits (PLCs). The concept device is significant for the eventual development of a new array of technologies, such as micro optical tweezers, optical traps, beam reshaping and nonlinear beam diode lasers. © 2012 Optical Society of America.

  13. Generation of J0-Bessel-Gauss beam by a heterogeneous refractive index map.

    Science.gov (United States)

    San-Roman-Alerigi, Damian P; Ng, Tien K; Zhang, Yaping; Ben Slimane, Ahmed; Alsunaidi, Mohammad; Ooi, Boon S

    2012-07-01

    In this paper, we present the theoretical studies of a refractive index map to implement a Gauss to a J(0)-Bessel-Gauss convertor. We theoretically demonstrate the viability of a device that could be fabricated on a Si/Si(1-y)O(y)/Si(1-x-y)Ge(x)C(y) platform or by photo-refractive media. The proposed device is 200 μm in length and 25 μm in width, and its refractive index varies in controllable steps across the light propagation and transversal directions. The computed conversion efficiency and loss are 90%, and -0.457 dB, respectively. The theoretical results, obtained from the beam conversion efficiency, self-regeneration, and propagation through an opaque obstruction, demonstrate that a two-dimensional (2D) graded index map of the refractive index can be used to transform a Gauss beam into a J(0)-Bessel-Gauss beam. To the best of our knowledge, this is the first demonstration of such beam transformation by means of a 2D index-mapping that is fully integrable in silicon photonics based planar lightwave circuits (PLCs). The concept device is significant for the eventual development of a new array of technologies, such as micro optical tweezers, optical traps, beam reshaping and nonlinear beam diode lasers.

  14. Influence of Urea Concentration on Refractive Index of AdBlue fluid Evaluated by Regression Analysis

    Directory of Open Access Journals (Sweden)

    Adam Polcar

    2016-01-01

    Full Text Available The article deals with the influence urea concentration in the AdBlue fluid on the refractive index. The AdBlue fluid is an aqueous solution of urea and demineralized water. It is used as a reducing agent for SCR (Selective Catalytic Reduction system. Due to temperature fluctuation of AdBlue during the measurement of refractive index, the multi-dimensional linear regression had to be used to determine the effect of the two factors – concentration and temperature. This article describes in detail the individual steps of the regression model construction done using the so-called regression triplet. The task of this method was to create a regression model which describes the influence urea concentration and small changes in temperature on refractive index of AdBlue fluid. As the results of the multi-dimensional regression analysis show, the temperature factor is statistically insignificant because of small range of temperature fluctuation during measurement, and thus only the urea concentration in the fluid had the major effect on the refractive index.

  15. Tuning of Ag-SPR band position in refractive index controlled ...

    Indian Academy of Sciences (India)

    Wintec

    Abstract. Inorganic (silica-titania)–organic (polyethylene oxide) hybrid films with variable refractive index (RI) values were synthesized and Ag nanoparticles were generated in situ inside such hybrid films to develop coloured coatings specially on plastic substrates. The hybrid films and the corresponding Ag- incorporated ...

  16. Refractive index calculation for analysis of aqueous solutions of heavy water

    International Nuclear Information System (INIS)

    Azuaga, N.S.; Marques, A.R.; Djega-Mariadassou, G.

    1978-01-01

    Refractive index measurements are used for analysis of aqueous solutions of D 2 O, particularly in the intermediate concentration range. The accuracy of titration is around 0.4% of atomic deuterium. Assuming that nsub(HDO)=(nsub(H 2 O)+nsub(D 2 O))/2, and that the refractive index of an initial mixture H 2 O-D 2 O is, in this case, an additive property of the molecular species, the refractive index n(t) of the ternary mixture (H 2 O-D 2 O-HDO) can be expressed by a relation. Using these two equations, it becomes possible to calculate the various types of calibration curves versus n, in the whole range of concentrations. To build these composition - n(t) curves, the only necessary data are the refractive index measurements of pure H 2 O and D 2 O and the value of equilibrium constant of the reaction H 2 O+D 2 O reversible 2HDO at the proper temperature [fr

  17. Refractive index sensing of green fluorescent proteins in living cells using fluorescence lifetime imaging microscopy

    NARCIS (Netherlands)

    van Manen, Henk-Jan; Verkuijlen, Paul; Wittendorp, Paul; Subramaniam, Vinod; van den Berg, Timo K; Roos, Dirk; Otto, Cees

    2008-01-01

    We show that fluorescence lifetime imaging microscopy (FLIM) of green fluorescent protein (GFP) molecules in cells can be used to report on the local refractive index of intracellular GFP. We expressed GFP fusion constructs of Rac2 and gp91(phox), which are both subunits of the phagocyte NADPH

  18. Infrared refractive index of thin YBa2Cu3O7 superconducting films

    International Nuclear Information System (INIS)

    Zhang, Z.M.; Choi, B.I.; Le, T.A.; Flik, M.I.; Siegal, M.P.; Phillips, J.M.

    1992-01-01

    This work investigates whether thin-film optics with a constant refractive index can be applied to high-T c superconducting thin films. The reflectance and transmittance of YBa 2 Cu 3 O 7 films on LaAlO 3 substrates are measured using a Fourier-transform infrared spectrometer at wavelengths from 1 to 100 μm at room temperature. The reflectance of these superconducting films at 10K in the wavelength region from 2.5 to 25 μm is measured using a cryogenic reflectance accessory. The film thickness varies from 10 to 200 nm. By modeling the frequency-dependent complex conductivity in the normal and superconducting states and applying electromagnetic-wave theory, the complex refractive index of YBa 2 Cu 3 O 7 films is obtained with a fitting technique. It is found that a thickness-independent refractive index can be applied even to a 25nm film, and average values of the spectral refractive index for film thicknesses between 25 and 200 nm are recommended for engineering applications

  19. Higher-Order Nonlinearity of Refractive Index: the Case of Argon

    Science.gov (United States)

    Tarazkar, Maryam; Romanov, Dmitri; Levis, Robert

    2013-05-01

    Higher-order dynamic Kerr effect (HOKE) is currently at the center of a controversy regarding the mechanisms of laser filamentation. A strong HOKE with a crossover from positive to negative nonlinear refractive index at intensities well below the ionization threshold, would engender plasma-free filamentation and exotic new effects in light propagation. Experimental evidence of HOKE crossover or lack thereof is being hotly debated. Motivated by this debate, we report the frequency-dependent nonlinear refractive index coefficients n2 and n4 for atmospheric-pressure argon gas, calculated via developed coupled cluster cubic response approach implemented in Dalton program. All calculations are performed at the CCSD level of theory with t-Aug-cc-PV5Z basis set. The benchmark dispersion curve for n2 reproduces correctly the available experimental data and agrees well with previously-reported theoretical calculations. The nonlinear refractive index n4 is obtained using the relations between different hyperpolarizability coefficients, and the latter are calculated via the auxiliary static electric field approach on the basis of n2. We found that the higher-order nonlinear refraction index n4 is positive over the wavelengths 300 nm-1500 nm. This result runs counter to the HOKE crossover hypothesis. Support from the Air Force Office of Scientific Research, Grant No. N00014-10-0293, is gratefully acknowledged.

  20. Tuning of Ag-SPR band position in refractive index controlled ...

    Indian Academy of Sciences (India)

    Inorganic (silica-titania)-organic (polyethylene oxide) hybrid films with variable refractive index (RI) values were synthesized and Ag nanoparticles were generated in situ inside such hybrid films to develop coloured coatings specially on plastic substrates. The hybrid films and the corresponding Agincorporated films were ...

  1. Reflection-based fibre-optic refractive index sensor using surface plasmon resonance

    Czech Academy of Sciences Publication Activity Database

    Hlubina, P.; Kadulová, M.; Ciprian, D.; Sobota, Jaroslav

    2014-01-01

    Roč. 9, August 19 (2014), 14033:1-5 ISSN 1990-2573 R&D Projects: GA MŠk(CZ) LO1212 Keywords : surface plasmon resonance * fibre -optic sensor * spectral interrogation technique * aqueous solutions of ethanol * refractive index Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.231, year: 2014

  2. Direct Measurement of Index of Refraction of Air by Means of High-Resolution Laser Interferometry

    Czech Academy of Sciences Publication Activity Database

    Číp, Ondřej; Petrů, František; Matoušek, Vít; Lazar, Josef

    T118, - (2005), s. 48-50 ISSN 0031-8949 R&D Projects: GA ČR(CZ) GA102/02/1318 Keywords : index of refraction of air * optical resonator Subject RIV: BH - Optics, Masers, Lasers Impact factor: 0.661, year: 2004

  3. Methods of direct measurement of the refraction index of air using high-resolution laser interferometry

    Czech Academy of Sciences Publication Activity Database

    Číp, Ondřej; Petrů, František; Matoušek, V.; Buchta, Z.; Lazar, Josef

    2004-01-01

    Roč. 49, č. 3 (2004), s. 88-90 ISSN 0447-6441 R&D Projects: GA AV ČR IBS2065009 Keywords : laser interferometry * refraction index * Fabry-Perot interferometer Subject RIV: BH - Optics, Masers, Lasers

  4. Simultaneous time-resolved measurement of the reaction rates and the refractive index of photopolymerization processes

    NARCIS (Netherlands)

    Bak, Tomasz M; Beusink, J Bianca; Subramaniam, Vinod; Kanger, Johannes S

    2010-01-01

    We explore the use of imaging surface plasmon resonance (iSPR) to simultaneously measure the refractive index and reaction rates of the commercially available Ormocore photosensitive resist during photopolymerization. To this end, we adapted a commercially available iSPR device. We demonstrate good

  5. Measurement of nonlinear refractive index in open-aperture Z-scan ...

    Indian Academy of Sciences (India)

    Abstract. We present an experimental study on measurement of nonlinear refractive index (n2) of organic liquids when the thermo-optic effects manifest into large nonlinear phase shifts ( φ0) in an open-aperture Z-scan configuration. Although we do not obtain the familiar peak–valley nor- malized transmittance curve as in ...

  6. Measurement of nonlinear refractive index in open-aperture Z-scan ...

    Indian Academy of Sciences (India)

    We present an experimental study on measurement of nonlinear refractive index (2) of organic liquids when the thermo-optic effects manifest into large nonlinear phase shifts (0) in an open-aperture ... School of Physical Sciences, National Institute of Science Education and Research, Bhubaneswar 751 005, India ...

  7. Design of a Michelson Interferometer for Quantitative Refraction Index Profile Measurements

    NARCIS (Netherlands)

    Nijholt, J.L.M.

    1998-01-01

    This book describes the theoretical design of a three camera Michelson interferometer set-up for quantitative refractive index measuerments. Although a two camera system is easier to align and less expensive, a three camera interferometer is preferred because the expected measuring accuracy is much

  8. Laplace-Gauss and Helmholtz-Gauss paraxial modes in media with quadratic refraction index.

    Science.gov (United States)

    Kiselev, Aleksei P; Plachenov, Alexandr B

    2016-04-01

    The scalar theory of paraxial wave propagation in an axisymmetric medium where the refraction index quadratically depends on transverse variables is addressed. Exact solutions of the corresponding parabolic equation are presented, generalizing the Laplace-Gauss and Helmholtz-Gauss modes earlier known for homogeneous media. Also, a generalization of a zero-order asymmetric Bessel-Gauss beam is given.

  9. Refractive index measurement for planar photonic crystal using a microscopy-spectrometry method

    Science.gov (United States)

    Ouyang, Mike X.; Onyiriuka, Emmanuel C.; Kinney, L. D.

    2000-11-01

    We report a unique technique to measure the refractive index (n), extinction coefficient (k), and thickness of thin films based on either the reflection or transmission spectra. The method combines a spectrometer, an optical microscope and a video camera. It is inexpensive, versatile and fast (Telekom using the electron induced deposition.

  10. Design of negative refractive index metamaterial with water droplets using 3D-printing

    Science.gov (United States)

    Shen, Zhaoyang; Yang, Helin; Huang, Xiaojun; Yu, Zetai

    2017-11-01

    We numerically and experimentally demonstrate a negative refractive index (NRI) behavior in combined water droplets and photosensitive resin materials operating in the microwave regime. The NRI is achieved over a very wide frequency range in 10.27-15 GHz with bandwidth of 4.63 GHz. The simulated results approximately agree with the experimental results. The negative index band can be controlled by water droplet radius. The proposed metamaterial production process is simple and may have potential applications in broadband tunable devices.

  11. Reconstruction of fiber grating refractive-index profiles from complex bragg reflection spectra.

    Science.gov (United States)

    Huang, D W; Yang, C C

    1999-07-20

    Reconstruction of the refractive-index profiles of fiber gratings from their complex Bragg reflection spectra is experimentally demonstrated. The amplitude and phase of the complex reflection spectrum were measured with a balanced Michelson interferometer. By integrating the coupled-mode equations, we built the relationship between the complex coupling coefficient and the complex reflection spectrum as an iterative algorithm for reconstructing the index profile. This method is expected to be useful for reconstructing the index profiles of fiber gratings with any apodization, chirp, or dc structures. An apodized chirped grating and a uniform grating with a depression of index modulation were used to demonstrate the technique.

  12. Omnidirectional Photonic Band Gap Using Low Refractive Index Contrast Materials and its Application in Optical Waveguides

    KAUST Repository

    Vidal Faez, Angelo

    2012-07-01

    Researchers have argued for many years that one of the conditions for omnidirectional reflection in a one-dimensional photonic crystal is a strong refractive index contrast between the two constituent dielectric materials. Using numerical simulations and the theory of Anderson localization of light, in this work we demonstrate that an omnidirectional band gap can indeed be created utilizing low refractive index contrast materials when they are arranged in a disordered manner. Moreover, the size of the omnidirectional band gap becomes a controllable parameter, which now depends on the number of layers and not only on the refractive index contrast of the system, as it is widely accepted. This achievement constitutes a major breakthrough in the field since it allows for the development of cheaper and more efficient technologies. Of particular interest is the case of high index contrast one-dimensional photonic crystal fibers, where the propagation losses are mainly due to increased optical scattering from sidewall roughness at the interfaces of high index contrast materials. By using low index contrast materials these losses can be reduced dramatically, while maintaining the confinement capability of the waveguide. This is just one of many applications that could be proven useful for this discovery.

  13. Effects of water vapour on the structure parameter of the refractive index for near-infrared radiation

    NARCIS (Netherlands)

    Moene, A.F.

    2003-01-01

    The refractive index of air (n) mainly depends on temperature and water vapour content. For near-infrared radiation, temperature is the main determining factor. To determine the structure parameter of temperature (C-T(2)) from the structure parameter of the refractive index (C-n(2)), the influence

  14. Absorption and refractive index recovery in an InGaAsP MQW electro-absorption modulator

    DEFF Research Database (Denmark)

    Romstad, Francis Pascal; Mørk, Jesper; Hvam, Jørn Märcher

    2001-01-01

    We show the first measurements of gain and refractive index recovery in an electro-absorber. The measurements show strong dependence of the refractive index dynamics on the reverse bias. The results are discussed in relation to field screening following the optical carrier injection....

  15. Direct characterization of ultraviolet-light-induced refractive index structures by scanning near-field optical microscopy

    DEFF Research Database (Denmark)

    Svalgaard, Mikael; Madsen, S.; Hvam, Jørn Märcher

    1998-01-01

    We have applied a reflection scanning near-field optical microscope to directly probe ultraviolet (UV)-light-induced refractive index structures in planar glass samples. This technique permits direct comparison between topography and refractive index changes (10(-5)-10(-3)) with submicrometer...

  16. Optomecatronic system to estimate the index of refraction of a Compound Chromic

    International Nuclear Information System (INIS)

    Garcia, L.; Camas, J.; Pola, L.; Castannon, H.; Mota, R.; Juarez, N.; Garcia, C.

    2012-01-01

    The paper presents an optomechatronic system, which it can detect the displacement of laser beam refracted by Lophine layer deposited in a slider. The displacement was estimated by mean of image processing. The displacement of the laser beam is a function of the refractive index of the Lophine layer as function of temperature change. The system uses a Graphical User Interface (GUI), where it is possible to control the incidence angle of the laser beam, and the same time, the temperature of the lophine layer can be sensed. (Author)

  17. A numerical method for determining refractive index of a glass sample from its implicit transcendental function

    Science.gov (United States)

    Ince, R.; Sınır, E.; Feeney, M.; Yükselici, M. H.; Ince, A. T.

    2008-07-01

    The refractive index of a glass sample was determined from an implicit function of its optical path within the sample arm of a Michelson interferometer. On rotation of the sample from normal incidence, the light beam suffers increasing refraction, causing the optical path for air to decrease whilst that for the glass sample increases. This is observed as a shift in the number of fringes, which were captured and counted in real time on a computer, as rotation proceeded. The angle of rotation and the fringe shift were entered into an implicit function of optical path versus refractive index written to an Excel worksheet. A refractive index matching the wavelength of the He-Ne laser light source was read-off to three decimal places. A new source of uncertainty has been identified, misalignment on a micrometer scale of the laser normal to the sample surface. Whilst driving the sample to find normal incidence a finite angular region of insensitivity (dead space) occurs due to misalignment of the laser normal to the sample surface by a few micrometers. A linearization technique was employed to compensate for this offset and hence reduce its uncertainty contribution.

  18. Refractive Index Tuning of Hybrid Materials for Highly Transmissive Luminescent Lanthanide Particle-Polymer Composites.

    Science.gov (United States)

    Kim, Paul; Li, Cheng; Riman, Richard E; Watkins, James

    2018-03-14

    High-refractive-index ZrO 2 nanoparticles were used to tailor the refractive index of a polymer matrix to match that of luminescent lanthanide-ion-doped (La 0.92 Yb 0.075 Er 0.005 F 3 ) light-emitting particles, thereby reducing scattering losses to yield highly transparent emissive composites. Photopolymerization of blends of an amine-modified poly(ether acrylate) oligomer and tailored quantities of ZrO 2 nanoparticles yielded optically transparent composites with tailored refractive indices between 1.49 and 1.69. By matching the refractive index of the matrix to that of La 0.92 Yb 0.075 Er 0.005 F 3 , composites with high transmittance (>85%) and low haze from the visible to infrared regions, bright 1530 nm optical emissions were achieved at solids loadings of La 0.92 Yb 0.075 Er 0.005 F 3 , ranging from 5 to 30 vol %. These optical results suggest that a hybrid matrix approach is a versatile strategy for the fabrication of functional luminescent optical composites of high transparency.

  19. Improving axial resolution in confocal microscopy with new high refractive index mounting media.

    Directory of Open Access Journals (Sweden)

    Coralie Fouquet

    Full Text Available Resolution, high signal intensity and elevated signal to noise ratio (SNR are key issues for biologists who aim at studying the localisation of biological structures at the cellular and subcellular levels using confocal microscopy. The resolution required to separate sub-cellular biological structures is often near to the resolving power of the microscope. When optimally used, confocal microscopes may reach resolutions of 180 nm laterally and 500 nm axially, however, axial resolution in depth is often impaired by spherical aberration that may occur due to refractive index mismatches. Spherical aberration results in broadening of the point-spread function (PSF, a decrease in peak signal intensity when imaging in depth and a focal shift that leads to the distortion of the image along the z-axis and thus in a scaling error. In this study, we use the novel mounting medium CFM3 (Citifluor Ltd., UK with a refractive index of 1.518 to minimize the effects of spherical aberration. This mounting medium is compatible with most common fluorochromes and fluorescent proteins. We compare its performance with established mounting media, harbouring refractive indices below 1.500, by estimating lateral and axial resolution with sub-resolution fluorescent beads. We show furthermore that the use of the high refractive index media renders the tissue transparent and improves considerably the axial resolution and imaging depth in immuno-labelled or fluorescent protein labelled fixed mouse brain tissue. We thus propose to use those novel high refractive index mounting media, whenever optimal axial resolution is required.

  20. Using aircraft measurements to determine the refractive index of Saharan dust during the DODO Experiments

    Directory of Open Access Journals (Sweden)

    C. L. McConnell

    2010-03-01

    Full Text Available Much uncertainty in the value of the imaginary part of the refractive index of mineral dust contributes to uncertainty in the radiative effect of mineral dust in the atmosphere. A synthesis of optical, chemical and physical in-situ aircraft measurements from the DODO experiments during February and August 2006 are used to calculate the refractive index mineral dust encountered over West Africa. Radiative transfer modeling and measurements of broadband shortwave irradiance at a range of altitudes are used to test and validate these calculations for a specific dust event on 23 August 2006 over Mauritania. Two techniques are used to determine the refractive index: firstly a method combining measurements of scattering, absorption, size distributions and Mie code simulations, and secondly a method using composition measured on filter samples to apportion the content of internally mixed quartz, calcite and iron oxide-clay aggregates, where the iron oxide is represented by either hematite or goethite and clay by either illite or kaolinite. The imaginary part of the refractive index at 550 nm (ni550 is found to range between 0.0001 i to 0.0046 i, and where filter samples are available, agreement between methods is found depending on mineral combination assumed. The refractive indices are also found to agree well with AERONET data where comparisons are possible. ni550 is found to vary with dust source, which is investigated with the NAME model for each case. The relationship between both size distribution and ni550 on the accumulation mode single scattering albedo at 550 nm (ω0550 are examined and size distribution is found to have no correlation to ω0550, while ni550 shows a strong linear relationship with ω0550. Radiative transfer modeling was performed with different

  1. SURVEY OF SELECTED PROCEDURES FOR THE INDIRECT DETERMINATION OF THE GROUP REFRACTIVE INDEX OF AIR

    Directory of Open Access Journals (Sweden)

    Filip Dvořáček

    2018-02-01

    Full Text Available The main aim of the research was to evaluate numeric procedures of the indirect determination of the group refractive index of air and to choose the suitable ones for requirements of ordinary and high accuracy distance measurement in geodesy and length metrology. For this purpose, 10 existing computation methods were derived from various authors’ original publications and all were analysed for wide intervals of wavelengths and atmospheric parameters. The determination of the phase and the group refractive indices are essential parts in the evaluation of the first velocity corrections of laser interferometers and electronic distance meters. The validity of modern procedures was tested with respect to updated CIPM-2007 equations of the density of air. The refraction model of Leica AT401 laser tracker was analysed.

  2. Thermodynamic study of three pharmacologically significant drugs: Density, viscosity, and refractive index measurements at different temperatures

    International Nuclear Information System (INIS)

    Iqbal, Muhammad Javed; Chaudhry, Mansoora Ahmed

    2009-01-01

    Measurements of density, viscosity, and refractive index of three pharmacologically significant drugs, i.e. diclofenac sodium, cetrizine, and doxycycline have been carried in aqueous medium at T = (293.15 to 313.15) K. An automated vibrating-tube densimeter, viscometer, and refractometer are used in a concentration range from (7.5) . 10 -3 to 25 . 10 -3 ) mol . kg -1 . The precise density results are used to evaluate the apparent molar volume, partial molar volume, thermal expansion coefficient, partial molar expansivity, and the Hepler's constant. Viscosity results are used to calculate the Jones-Dole viscosity B-coefficient, free energy of activation of the solute and solvent, activation enthalpy, and activation entropy. The molar refractive indices of the drug solutions can be employed to calculate molar refraction. It is inferred from these results that the above mentioned drugs act as structure-making compounds due to hydrophobic hydration of the molecules in the drugs

  3. Propagation of hypergeometric laser beams in a medium with a parabolic refractive index

    Science.gov (United States)

    Kotlyar, V. V.; Kovalev, A. A.; Nalimov, A. G.

    2013-12-01

    An expression to describe the complex amplitude of a family of paraxial hypergeometric laser beams propagating in a parabolic-index fiber is proposed. A particular case of a Gaussian optical vortex propagating in a parabolic-index fiber is studied. Under definite parameters, the Gaussian optical vortices become the modes of the medium. This is a new family of paraxial modes derived for the parabolic-index medium. A wide class of solutions of nonparaxial Helmholtz equations that describe modes in a parabolic refractive index medium is derived in the cylindrical coordinate system. As the solutions derived are proportional to Kummer’s functions, only those of them which are coincident with the nonparaxial Laguerre-Gaussian modes possess a finite energy, meaning that they are physically implementable. A definite length of the graded-index fiber is treated as a parabolic lens, and expressions for the numerical aperture and the focal spot size are deduced. An explicit expression for the radii of the rings of a binary lens approximating a parabolic-index lens is derived. Finite-difference time-domain simulation has shown that using a binary parabolic-index microlens with a refractive index of 1.5, a linearly polarized Gaussian beam can be focused into an elliptic focal spot which is almost devoid of side-lobes and has a smaller full width at half maximum diameter of 0.45 of the incident wavelength.

  4. Directly photoinscribed refractive index change and Bragg gratings in Ohara WMS-15 glass ceramic.

    Science.gov (United States)

    Krug, Peter A; Rogojan, Rodica Matei; Albert, Jacques

    2009-06-20

    We inscribed thick volume gratings in WMS-15 glass ceramic by ultraviolet light at 193 and 248 nm. Unlike earlier work in ceramic materials, the inscription process modified the optical properties of the material without the need for any additional chemical or thermal processing. Experimental evidence from measurements of grating growth, thermal annealing, and spectral absorption indicates that two distinct physical mechanisms are responsible for the grating formation. Weak, easily thermally bleached gratings resulted from exposure fluences below 0.3 kJ/cm2. Optical absorption measurements suggest that these low fluence gratings are predominantly absorption gratings. More thermally stable gratings, found to be refractive index gratings with unsaturated refractive index modulation amplitude as large as 6 x 10(-5) were formed at cumulative fluences of 1 kJ/cm2 and above.

  5. Refractive index biosensor using sidewall gratings in dual-slot waveguide

    Science.gov (United States)

    Sahu, Sourabh; Ali, Jalil; Singh, Ghanshyam

    2017-11-01

    This paper presents an optical biosensor using sidewall grating in dual slot waveguide, modeled on silicon-on-insulator (SOI) platform. By optimizing the geometric parameters of the device, the spectral response is tailored to obtain a sharp resonant peak with high transmissivity that also enhances the limit-of-detection. The device detects the shift in resonant wavelength on a variation of the biomaterial refractive index. The simulation study has performed using the transfer matrix method. The obtained characteristics of the sensors include linear response to a change in refractive index of biomaterial, limit of detection of the order of 10-6 and ease of fabrication. The device performance has also compared with other SOI resonator structures like photonic crystal waveguide, sub-wavelength grating, ring resonator and grating resonator.

  6. Reconstruction of the refractive index gradient by x-ray diffraction enhanced computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Wang Junyue [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Zhu Peiping [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Yuan Qingxi [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Huang Wanxia [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Shu Hang [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Chen Bo [Department of Physics, University of Science and Technology of China, Hefei 230026 (China); Hu Tiandou [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Wu Ziyu [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China)

    2006-07-21

    The computed tomography technique cannot easily be extended to diffraction enhanced imaging (DEI) because, while from DEI we may extract the refractive index gradient in one dimension, from the conventional CT reconstruction algorithm we may reconstruct only a scalar quantity. However, recently we showed that changing the direction of the scan axis, and collecting a set of data related to the three-dimensional distribution of the refractive index gradient of the sample, a CT image was obtained. The algorithm we used is based on the conventional CT algorithm but with a specific pre-processing of the projection data. The mathematical framework of the procedure and a simple CT experiment are presented and discussed.

  7. Reconstruction of the refractive index gradient by x-ray diffraction enhanced computed tomography

    International Nuclear Information System (INIS)

    Wang Junyue; Zhu Peiping; Yuan Qingxi; Huang Wanxia; Shu Hang; Chen Bo; Hu Tiandou; Wu Ziyu

    2006-01-01

    The computed tomography technique cannot easily be extended to diffraction enhanced imaging (DEI) because, while from DEI we may extract the refractive index gradient in one dimension, from the conventional CT reconstruction algorithm we may reconstruct only a scalar quantity. However, recently we showed that changing the direction of the scan axis, and collecting a set of data related to the three-dimensional distribution of the refractive index gradient of the sample, a CT image was obtained. The algorithm we used is based on the conventional CT algorithm but with a specific pre-processing of the projection data. The mathematical framework of the procedure and a simple CT experiment are presented and discussed

  8. Plasma-enhanced growth, composition, and refractive index of silicon oxy-nitride films

    DEFF Research Database (Denmark)

    Mattsson, Kent Erik

    1995-01-01

    Secondary ion mass spectrometry and refractive index measurements have been carried out on silicon oxy-nitride produced by plasma-enhanced chemical vapor deposition (PECVD). Nitrous oxide and ammonia were added to a constant flow of 2% silane in nitrogen, to produce oxy-nitride films with atomic...... nitrogen concentrations between 2 and 10 at. %. A simple atomic valence model is found to describe both the measured atomic concentrations and published material compositions for silicon oxy-nitride produced by PECVD. A relation between the Si–N bond concentration and the refractive index is found......-product. A model, that combine the chemical net reaction and the stoichiometric rules, is found to agree with measured deposition rates for given material compositions. Effects of annealing in a nitrogen atmosphere has been investigated for the 400 °C– 1100 °C temperature range. It is observed that PECVD oxy...

  9. Photopolymerizable glass with high refractive index species: overview of emerging implementations

    Science.gov (United States)

    Calvo, M. L.; Martínez-Matos, O.; Rodrigo, J. A.; Alieva, T.; Hernández-Garay, M. P.; Martí, E. A.; Cheben, P.

    2009-05-01

    We present an overview of the main properties and the emerging implementations corresponding to a photopolymerizable glass modified with high refractive index species (HRIS) incorporated at molecular level. The study concerns to transmission and reflection holograms in Bragg and Raman-Nath regimens and polarization properties of gratings with high spatial frequencies are also analyzed demonstrating a strong dependence of the refractive index modulation with the polarization state of the reading beam. Not limited to the study of the optical properties of the photopolymerizable glass we propose two applications of the holographic material. The first one is the fabrication of polarizers elements with high performance at low cost such us holographic polarizers and holographic polarizers beam splitters. The second application concerns to the holographic recording of stables modes exhibiting high diffraction efficiency. Also, we have recently extended our studies to ultrashort pulse lasers in femtosecond regime. The photopolymerizable gratings are good candidates as optic elements to beam manipulation of ultrashort pulse lasers.

  10. Prediction of excess molar volumes of selected binary mixtures from refractive index data

    Directory of Open Access Journals (Sweden)

    Vuksanović Jelena M.

    2014-01-01

    Full Text Available The excess molar volumes of twenty two binary mixtures containing various groups of organic compounds: alcohols (ethanol, 1-propanol, 1,2-propanediol, 1,3-propanediol and glycerol, ketone (acetone, ester (butyl lactate, lactam (N-methyl-2-pyrrolidone, PEGs (PEG 200, PEG 400 and aromatics (benzene, toluene and pyridine were predicted from the refractive index data, using three types of equations coupled with several mixing rules for refractive index calculations: the Lorentz-Lorenz, Dale-Gladstone, Eykman, Arago-Biot, Newton, and Oster. The obtained results were analysed in terms of the applied equation and mixing rule and the nature of interactions between the mixtures’ components. [Projekat Ministarstva nauke Republike Srbije, br. 172063

  11. Pressure dependence of the refractive index of diamond, cubic silicon carbide and cubic boron nitride

    Science.gov (United States)

    Balzaretti, N. M.; da Jornada, J. A. H.

    1996-09-01

    The pressure dependence of the refractive index of diamond, cubic boron nitride and cubic silicon carbide, was measured up to 9 GPa by an interferometric method using the diamond anvil cell. A least-square fit yields the following values for ( {1}/{n}) ( {dn }/{dP }): - 3.6 × 10 -4GPa -1 for diamond, -3.2 × 10 -4GPa -1 for c-BN and, for 3CSiC, -8.3 × 10 -4GPa -1. These results were used to investigate, for the first time under pressure, general empirical relationships between refractive index and energy gap found in the literature. The volume dependence of the electronic polarizability, α, of these compounds was determined through the Lorentz-Lorenz approach. The obtained linear behavior of α for the three cases was correlated to previous results for the pressure dependence of the transverse effective charge, e T∗.

  12. Index of refraction enhancement of calcite particles coated with zinc carbonate

    Science.gov (United States)

    Lattaud, Kathleen; Vilminot, Serge; Hirlimann, Charles; Parant, Hubert; Schoelkopf, Joachim; Gane, Patrick

    2006-10-01

    ZnCO 3 coating on calcite particles has been developed in order to enhance the index of refraction of this mineral that is used as a charge in paper, paint and polymer industries. Chemical reaction between calcite particles in an aqueous suspension with zinc chloride promotes the formation of a ZnCO 3 coating consisting of two layers with different interactions with the calcite particle. The refraction index of the resulting composite particles increases with the Zn/Ca ratio. A model allows to evaluate the coating thickness. The value of the scattering S and diffusion K coefficients of sheets coated with the ZnCO 3 coated particles reveal a dependence on the preparation conditions with a 15% increase for the best samples.

  13. Reversing the direction of space and inverse Doppler effect in positive refraction index media

    International Nuclear Information System (INIS)

    Sun, Fei; He, Sailing

    2017-01-01

    A negative refractive index medium, in which all spatial coordinates are reversed (i.e. a left-hand triplet is formed) by a spatial folding transformation, can create many novel electromagnetic phenomena, e.g. backward wave propagation, and inversed Doppler effect (IDE). In this study, we use coordinate rotation transformation to reverse only two spatial coordinates (e.g. x ′ and y ′), while keeping z ′ unchanged. In this case, some novel phenomena, e.g. radiation-direction-reversing illusions and IDE, can be achieved in a free space region wrapped by the proposed shell without any negative refractive index medium, which is easier for experimental realization and future applications. (paper)

  14. The Polymerization of MMA and ST to Prepare Material with Gradient Refractive Index in Electric Field

    Directory of Open Access Journals (Sweden)

    Yao Huang

    2015-01-01

    Full Text Available Light scattering material with gradient refractive index was prepared under the electrical field by taking methyl methacrylate (MMA monomer as the matrix with the addition of a little preheated styrene (ST and peroxidation benzoin formyl (BPO. The material obtained under electrical field presented different transmittance and molecular weight at different parts of the cylindrical sample along the axis of the direction of electric field which led to the layering phenomenon and gradient refractive index. The disparity of molecular weight between different layers can be as much as 230 thousand. There were several peaks in the figure of GPC test of the sample under electric field. This proved that there were polymers with different molecular weights in the sample. Therefore, it can be concluded that electrical field has a significant effect on polymerization.

  15. A complete parameterisation of the relative humidity and wavelength dependence of the refractive index of hygroscopic inorganic aerosol particles

    Science.gov (United States)

    Cotterell, Michael I.; Willoughby, Rose E.; Bzdek, Bryan R.; Orr-Ewing, Andrew J.; Reid, Jonathan P.

    2017-08-01

    Calculations of aerosol radiative forcing require knowledge of wavelength-dependent aerosol optical properties, such as single-scattering albedo. These aerosol optical properties can be calculated using Mie theory from knowledge of the key microphysical properties of particle size and refractive index, assuming that atmospheric particles are well-approximated to be spherical and homogeneous. We provide refractive index determinations for aqueous aerosol particles containing the key atmospherically relevant inorganic solutes of NaCl, NaNO3, (NH4)2SO4, NH4HSO4 and Na2SO4, reporting the refractive index variation with both wavelength (400-650 nm) and relative humidity (from 100 % to the efflorescence value of the salt). The accurate and precise retrieval of refractive index is performed using single-particle cavity ring-down spectroscopy. This approach involves probing a single aerosol particle confined in a Bessel laser beam optical trap through a combination of extinction measurements using cavity ring-down spectroscopy and elastic light-scattering measurements. Further, we assess the accuracy of these refractive index measurements, comparing our data with previously reported data sets from different measurement techniques but at a single wavelength. Finally, we provide a Cauchy dispersion model that parameterises refractive index measurements in terms of both wavelength and relative humidity. Our parameterisations should provide useful information to researchers requiring an accurate and comprehensive treatment of the wavelength and relative humidity dependence of refractive index for the inorganic component of atmospheric aerosol.

  16. A complete parameterisation of the relative humidity and wavelength dependence of the refractive index of hygroscopic inorganic aerosol particles

    Directory of Open Access Journals (Sweden)

    M. I. Cotterell

    2017-08-01

    Full Text Available Calculations of aerosol radiative forcing require knowledge of wavelength-dependent aerosol optical properties, such as single-scattering albedo. These aerosol optical properties can be calculated using Mie theory from knowledge of the key microphysical properties of particle size and refractive index, assuming that atmospheric particles are well-approximated to be spherical and homogeneous. We provide refractive index determinations for aqueous aerosol particles containing the key atmospherically relevant inorganic solutes of NaCl, NaNO3, (NH42SO4, NH4HSO4 and Na2SO4, reporting the refractive index variation with both wavelength (400–650 nm and relative humidity (from 100 % to the efflorescence value of the salt. The accurate and precise retrieval of refractive index is performed using single-particle cavity ring-down spectroscopy. This approach involves probing a single aerosol particle confined in a Bessel laser beam optical trap through a combination of extinction measurements using cavity ring-down spectroscopy and elastic light-scattering measurements. Further, we assess the accuracy of these refractive index measurements, comparing our data with previously reported data sets from different measurement techniques but at a single wavelength. Finally, we provide a Cauchy dispersion model that parameterises refractive index measurements in terms of both wavelength and relative humidity. Our parameterisations should provide useful information to researchers requiring an accurate and comprehensive treatment of the wavelength and relative humidity dependence of refractive index for the inorganic component of atmospheric aerosol.

  17. Study on the effect of carbon nanotube coating on the refractive index sensing sensitivity of fiber modal interferometer

    Science.gov (United States)

    Zhang, Ya-nan; Xie, Wen-ge; Wang, Jianzhang; Wang, Pengzhao

    2018-01-01

    Refractive index sensing of liquid is important in the domain of chemistry and biology. Fiber optical sensors provide an excellent way to measure the refractive index due to their feasible integration to other fiber optics components, high sensitivity, small size, and distributed sensing. However, conventional optical sensors have different shortages. To find a practical way to measure the refractive index of liquid, this paper intended to combine Carbon Nanotube (CNT) with non-core fiber (NCF) to prepare a kind of modal interferometer sensor and to explore the effect of CNT coating on refractive index sensing properties of the modal interferometer. Firstly, a structure of single mode non-core single mode (SNS) fiber with a CNT film coating was proposed and simulated. The simulation results showed that the CNT coating could improve the refractive index sensitivity of the interferometer sensor. Then in the experiment part, the CNT solution was fabricated and deposited onto the NCF, and a refractive index sensing system was built to examine the property of the CNT-coated SNS interferometer sensor. During the experiment, the influence factors of sensitivity were summarized by testing the sensing performance under different conditions, and it was demonstrated that the CNT coating could improve the contrast of the interference spectrum, and also had the possibility to increase the refractive index sensitivity of the interferometer sensor.

  18. Contribution of the Refractive Index Fluctuations to the Length Noise in Displacement Interferometry

    Czech Academy of Sciences Publication Activity Database

    Holá, Miroslava; Hrabina, Jan; Šarbort, Martin; Oulehla, Jindřich; Číp, Ondřej; Lazar, Josef

    2015-01-01

    Roč. 15, č. 5 (2015), s. 263-267 ISSN 1335-8871 R&D Projects: GA ČR GB14-36681G; GA TA ČR TA02010711; GA TA ČR TE01020233; GA MŠk(CZ) LO1212; GA MŠk EE2.3.30.0054 Institutional support: RVO:68081731 Keywords : nanometrology * interferometry * refractive index of air Subject RIV: BH - Optics, Masers, Lasers Impact factor: 0.969, year: 2015

  19. Simultaneous determination of size and refractive index of red blood cells by light scattering measurements

    International Nuclear Information System (INIS)

    Ghosh, N.; Buddhiwant, P.; Uppal, A.; Majumder, S.K.; Patel, H.S.; Gupta, P.K.

    2006-01-01

    We present a fast and accurate approach for simultaneous determination of both the mean diameter and refractive index of a collection of red blood cells (RBCs). The approach uses the peak frequency of the power spectrum and the corresponding phase angle obtained by performing Fourier transform on the measured angular distribution of scattered light to determine these parameters. Results on the measurement of two important clinical parameters, the mean cell volume and mean cell hemoglobin concentration of a collection of RBCs, are presented

  20. Experimental demonstration of a metal-dielectric metamaterial refractive index sensor

    Science.gov (United States)

    Li, Shengyong; Ai, Xiaochuan; Wu, Ronghua; Chen, Jiajun

    2018-03-01

    A metamaterial equipment is designed and experimental verified in the near-infrared with two reflectivity dips. The metamaterial equipment shows independent of polarization. Simulated results indicate that the reflectivity dip is excited by the coupling of localized surface plasmon (LSP) modes. The metamaterial equipment can work as a refractive index detection sensor with high figure of merit (FOM) value. This proposed metamaterial sensor can be applied in detecting different biochemical liquid.

  1. Characterization of Chromatic Dispersion and Refractive Index of Polymer Optical Fibers

    Directory of Open Access Journals (Sweden)

    Igor Ayesta

    2017-12-01

    Full Text Available The chromatic dispersion and the refractive index of poly(methyl methacrylate polymer optical fibers (POFs have been characterized in this work by using a tunable femtosecond laser and a Streak Camera. The characterization technique is based on the measurement of the time delays of light pulses propagating along POFs at different wavelengths. Polymer fibers of three different lengths made by two manufacturers have been employed for that purpose, and discrepancies lower than 3% have been obtained in all cases.

  2. Increase in sensitivity of sensor units of environment refraction index change based on superficial plasmon resonance

    Directory of Open Access Journals (Sweden)

    Ushenin Yu. V.

    2011-04-01

    Full Text Available Results of computer modeling of an angular spectrum superficial plasmon resonance in metal films measurements with device PLAZMON-5 with infra-red radiator are analysed. It is shown that use of an infra-red source of radiation allows to improve sensitivity of sensor device in comparison with source of visible light. On an example of dielectric refraction indexes measurement with PLAZMON-5 device experimental check of theoretical calculations has been carried out.

  3. Increase in sensitivity of sensor units of environment refraction index change based on superficial plasmon resonance

    OpenAIRE

    Ushenin Yu. V.; Samoylov R. V.; Khristosenko R. V.

    2011-01-01

    Results of computer modeling of an angular spectrum superficial plasmon resonance in metal films measurements with device PLAZMON-5 with infra-red radiator are analysed. It is shown that use of an infra-red source of radiation allows to improve sensitivity of sensor device in comparison with source of visible light. On an example of dielectric refraction indexes measurement with PLAZMON-5 device experimental check of theoretical calculations has been carried out.

  4. Embedded plasmonic nanoparticles in high refractive index TiOx matrix for photovoltaics applications

    DEFF Research Database (Denmark)

    Pastorelli, Francesco

    Resume: More frequently high refractive index dielectric matrix are used in thin film photovoltaics as transporting layers with good optical proprieties. Doping such matrix with plasmonic resonant scatterers is a promising way to further increase energy conversion efficiencies by trapping incoming...... (EQE) and short-circuit current for solar cells loaded with plasmonic oligomers compared with reference organic cells.Theoretical calculations demonstrate that the wavelength dependent EQE enhancement is a resonant process due to the increased scattering efficiency in plasmonic antennas allowed...

  5. Effect of annealing on various dielectric functions and refractive index of lead iodide single crystals

    Czech Academy of Sciences Publication Activity Database

    Hassan, M. A. S.; Matuchová, Marie

    2006-01-01

    Roč. 60, 2/3 (2006), s. 51-54 ISSN 1407-009X R&D Projects: GA ČR(CZ) GA102/03/0379; GA ČR(CZ) GA102/04/0959; GA AV ČR(CZ) KSK1010104 Institutional research plan: CEZ:AV0Z20670512 Keywords : dielectric losses * refractive index * characteristics measurement Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering

  6. Refractive index sensor based on an abrupt taper Michelson interferometer in a single-mode fiber.

    Science.gov (United States)

    Tian, Zhaobing; Yam, Scott S-H; Loock, Hans-Peter

    2008-05-15

    A simple refractive index sensor based on a Michelson interferometer in a single-mode fiber is constructed and demonstrated. The sensor consists of a single symmetrically abrupt taper region in a short piece of single-mode fiber that is terminated by approximately 500 nm thick gold coating. The sensitivity of the new sensor is similar to that of a long-period-grating-type sensor, and its ease of fabrication offers a low-cost alternative to current sensing applications.

  7. Relationship between patient age and refractive index of the corneal stroma during refractive surgery assisted by femtosecond laser flap creation.

    Science.gov (United States)

    Amparo, Francisco; Patel, Sudi; Alió, Jorge L; Rodriguez-Prats, Jose L; Moreno, Luis J

    2012-07-01

    To measure the refractive index (RI) of the human corneal stroma in vivo using an objective Abbé refractometer (VCH-1) and to determine if RI of the stroma is related to age. VCH-1 was used to measure RI at the central anterior stroma immediately after lifting the flap in neophyte patients preselected for laser in situ keratomileusis. Surgical procedures continued as preplanned after measuring the RI, and in binocular cases, measurements were taken from the right eye only. Corneal flaps were created using a femtosecond laser system. Mean RI (±SD, range) and age (±SD, range) values were 1.373 (±0.006, 1.358-1.385) and 36.55 (±12.26, 18-74). A significant linear correlation was found between age and RI. Least squares regression lines equating RI with age (x, years) were of the form: RI = 1.36911 + 0.000096x (r = +0.195; n = 115; P = 0.037). Mean RI (± SD) in the 2 age groups separated by the median age (≤34 and ≥35) were 1.371 (±0.007; n = 57) and 1.374 (±0.005; n = 58). The difference was statistically significant (P = 0.018). RI of the anterior stroma in vivo tends to be increased in older patients when the corneal flap is created using a femtosecond laser device.

  8. Development and characterization of adjustable refractive index scattering epoxy acrylate polymer layers

    Science.gov (United States)

    Eiselt, Thomas; Preinfalk, Jan; Gleißner, Uwe; Lemmer, Uli; Hanemann, Thomas

    2017-03-01

    Several polymer films for improved optical properties in optoelectronic devices are presented. In such optical applications, it is sometimes important to have a film with an adjusted refractive index, scattering properties, and a low surface roughness. These diffusing films can be used to increase the efficiency of optoelectronic components, such as organic light-emitting diodes. Three different epoxy acrylate mixtures containing Syntholux 291 EA, bisphenol A glycerolate dimethacrylate, and Sartomer SR 348 L are characterized and optimized with different additives. The adjustable refractive index of the material is achieved by chemical doping using 9-vinylcarbazole. Titanium nanoparticles in the mixtures generate light scattering and increase the refractive index additionally. A high-power stirrer is used to mix and disperse all chemical substances together to a homogenous mixture. The viscosity behavior of the mixtures is an important property for the selection of the production method and, therefore, the viscosity measurement results are presented. After the mixing, the monomer mixture is applied on glass substrates by screen printing. To initiate polymerization, the produced films are irradiated for 10 min with ultraviolet radiation and heat. Transmission measurements of the polymer matrix and roughness measurements complement the characterization.

  9. Simulation on scattering features of biological tissue based on generated refractive-index model

    International Nuclear Information System (INIS)

    Wang Baoyong; Ding Zhihua

    2011-01-01

    Important information on morphology of biological tissue can be deduced from elastic scattering spectra, and their analyses are based on the known refractive-index model of tissue. In this paper, a new numerical refractive-index model is put forward, and its scattering properties are intensively studied. Spectral decomposition [1] is a widely used method to generate random medium in geology, but it is never used in biology. Biological tissue is different from geology in the sense of random medium. Autocorrelation function describe almost all of features in geology, but biological tissue is not as random as geology, its structure is regular in the sense of fractal geometry [2] , and fractal dimension can be used to describe its regularity under random. Firstly scattering theories of this fractal media are reviewed. Secondly the detailed generation process of refractive-index is presented. Finally the scattering features are simulated in FDTD (Finite Difference Time Domain) Solutions software. From the simulation results, we find that autocorrelation length and fractal dimension controls scattering feature of biological tissue.

  10. Derivation of a Vacuum Refractive Index in a Stringy Space-Time Foam Model

    CERN Document Server

    Ellis, Jonathan Richard; Nanopoulos, D V

    2008-01-01

    It has been suggested that energetic photons propagating in vacuo should experience a non-trivial refractive index due to the foamy structure of space-time induced by quantum-gravitational fluctuations. The sensitivity of recent astrophysical observations, particularly of AGN Mk501 by the MAGIC Collaboration, approaches the Planck scale for a refractive index depending linearly on the photon energy. We present here a new derivation of this quantum-gravitational vacuum refraction index, based on a stringy analogue of the interaction of a photon with internal degrees of freedom in a conventional medium. We model the space-time foam as a gas of D-particles in the bulk space-time of a higher-dimensional cosmology where the observable Universe is a D3-brane. The interaction of an open string representing a photon with a D-particle stretches and excites the string, which subsequently decays and re-emits the photon with a time delay that increases linearly with the photon energy and is related to stringy uncertainty...

  11. Simulation on scattering features of biological tissue based on generated refractive-index model

    Energy Technology Data Exchange (ETDEWEB)

    Wang Baoyong; Ding Zhihua, E-mail: zh_ding@zju.edu.cn [State Key Lab of Modern Optical Instrumentation, Zhejiang University 38 Zheda Rd., Hangzhou 310027 (China)

    2011-01-01

    Important information on morphology of biological tissue can be deduced from elastic scattering spectra, and their analyses are based on the known refractive-index model of tissue. In this paper, a new numerical refractive-index model is put forward, and its scattering properties are intensively studied. Spectral decomposition{sup [1]} is a widely used method to generate random medium in geology, but it is never used in biology. Biological tissue is different from geology in the sense of random medium. Autocorrelation function describe almost all of features in geology, but biological tissue is not as random as geology, its structure is regular in the sense of fractal geometry{sup [2]}, and fractal dimension can be used to describe its regularity under random. Firstly scattering theories of this fractal media are reviewed. Secondly the detailed generation process of refractive-index is presented. Finally the scattering features are simulated in FDTD (Finite Difference Time Domain) Solutions software. From the simulation results, we find that autocorrelation length and fractal dimension controls scattering feature of biological tissue.

  12. Refractive index dependent local electric field enhancement in cylindrical gold nanohole

    International Nuclear Information System (INIS)

    Zhu Jian

    2011-01-01

    We report on the local electric field characters in a long cylindrical gold nanohole. Theoretical calculation results based on quasi-static model show that the local environmental dielectric constant dependent electric field intensity and field distribution in the gold nanohole show quite unique properties, different from those in the thin gold nanotube. Because of the thick gold wall, no plasmon hybridization exists. So there is only one resonance frequency taking place, and the intense local field has been focused into the gold nanohole. Our main finding is that, the local field in the nanohole is largely dependent on the inner hole refractive index and outer environmental refractive index. The competition between inner hole and outer polarization leads to a non-monotonic change of the local field intensity with increasing the dielectric constant of the nanohole. This refractive index controlled local field enhancement in cylindrical gold nanohole presents a potential for tunable surface-enhanced fluorescence and novel nano-optical biosensing applications.

  13. Refractive index dispersion of swift heavy ion irradiated BFO thin films using Surface Plasmon Resonance technique

    Energy Technology Data Exchange (ETDEWEB)

    Paliwal, Ayushi [Department of Physics and Astrophysics, University of Delhi, Delhi 110007 (India); Sharma, Savita [Department of Applied Physics, Delhi Technological University, Delhi (India); Tomar, Monika [Physics Department, Miranda House, University of Delhi, Delhi 110007 (India); Singh, Fouran [Inter University Accelerator Centre, Aruna Asaf Ali Marg, New Delhi 110075 (India); Gupta, Vinay, E-mail: drguptavinay@gmail.com [Department of Physics and Astrophysics, University of Delhi, Delhi 110007 (India)

    2016-07-15

    Highlights: • Investigated the optical properties of BiFeO{sub 3} (BFO) thin films after irradiation using SPR. • Otto configuration has been used to excite the surface plasmons using gold metal thin film. • BFO thin films were prepared by sol–gel spin coating technique. • Examined the refractive index dispersion of pristine and irradiated BFO thin film. - Abstract: Swift heavy ion irradiation (SHI) is an effective technique to induce defects for possible modifications in the material properties. There is growing interest in studying the optical properties of multiferroic BiFeO{sub 3} (BFO) thin films for optoelectronic applications. In the present work, BFO thin films were prepared by sol–gel spin coating technique and were irradiated using the 15 UD Pelletron accelerator with 100 MeV Au{sup 9+} ions at a fluence of 1 × 10{sup 12} ions cm{sup −2}. The as-grown films became rough and porous on ion irradiation. Surface Plasmon Resonance (SPR) technique has been identified as a highly sensitive and powerful technique for studying the optical properties of a dielectric material. Optical properties of BFO thin films, before and after irradiation were studied using SPR technique in Otto configuration. Refractive index is found to be decreasing from 2.27 to 2.14 on ion irradiation at a wavelength of 633 nm. Refractive index dispersion of BFO thin film (from 405 nm to 633 nm) before and after ion radiation was examined.

  14. Thermo-optic coefficient and nonlinear refractive index of silicon oxynitride waveguides

    Science.gov (United States)

    Trenti, A.; Borghi, M.; Biasi, S.; Ghulinyan, M.; Ramiro-Manzano, F.; Pucker, G.; Pavesi, L.

    2018-02-01

    Integrated waveguiding devices based on silicon oxynitride (SiON) are appealing for their relatively high refractive index contrast and broadband transparency. The lack of two photon absorption at telecom wavelengths and the possibility to fabricate low loss waveguides make SiON an ideal platform for on-chip nonlinear optics and for the realization of reconfigurable integrated quantum lightwave circuits. Despite this, very few studies on its linear and nonlinear optical properties have been reported so far. In this work, we measured the thermo-optic coefficient dn/dT and the nonlinear refractive index n2 of relatively high (n ˜ 1.83 at a wavelength of 1.55 μm) refractive index SiON by using racetrack resonators. These parameters have been determined to be d/n d T =(1.84 ±0.17 ) × 10-5 K-1 and n2 = (7 ± 1) × 10-16 cm2W-1.

  15. Standard guide for choosing a method for determining the index of refraction and dispersion of glass

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2006-01-01

    1.1 This guide identifies and describes seven test methods for measuring the index of refraction of glass, with comments relevant to their uses such that an appropriate choice of method can be made. Four additional methods are mentioned by name, and brief descriptive information is given in Annex A1. The choice of a test method will depend upon the accuracy required, the nature of the test specimen that can be provided, the instrumentation available, and (perhaps) the time required for, or the cost of, the analysis. Refractive index is a function of the wavelength of light; therefore, its measurement is made with narrow-bandwidth light. Dispersion is the physical phenomenon of the variation of refractive index with wavelength. The nature of the test-specimen refers to its size, form, and quality of finish, as described in each of the methods herein. The test methods described are mostly for the visible range of wavelengths (approximately 400 to 780m); however, some methods can be extended to the ultraviolet a...

  16. Intraocular lens power calculation following LASIK: determination of the new effective index of refraction.

    Science.gov (United States)

    Jarade, Elias F; Abi Nader, Françoise C; Tabbara, Khalid F

    2006-01-01

    To determine the new corneal effective index of refraction (rN) following LASIK to be used for accurate keratometry reading (K-reading). A total of 332 eyes that underwent myopic LASIK were divided into two groups (group A [n = 137] and group B [n = 1951). In each group, patients were divided into four subgroups according to the amount of spherical equivalent refraction of myopic LASIK ablation (subgroup 1 [ -12.0 D]). In each subgroup of group A, K-reading was measured by the clinical history method and the new corneal effective index (rN) was determined using paraxial formula: (K-reading = (rN-1)/Ra), where Ra is the radius of curvature of the anterior corneal surface. In group B, the anterior radius of curvature of the cornea was determined by automated K-reading, and K-reading was measured in each subgroup using the new effective index in paraxial formula, clinical history method, and automated K-reading. In group A, the new effective index of refraction was 1.3355, 1.3286, 1.3237, and 1.3172 in the four subgroups, respectively. In group B, the mean K-reading measurements using rN in paraxial formula, clinical history method, and automated K-reading were: 40.33 +/- 1.68 D, 40.33 +/- 1.67 D, and 40.54 +/- 1.69 D, respectively, in subgroup 1; 37.96 +/- 1.26 D, 38.03 +/- 1.38 D, and 38.98 +/- 1.28 D, respectively, in subgroup 2; 35.77 +/- 1.75 D, 35.84 +/- 1.85 D, and 37.29 +/- 1.83 D, respectively, in subgroup 3; and 34.03 +/- 1.49 D, 34.15 +/- 1.84 D, and 36.21 +/- 1.59 D, respectively, in subgroup 4. In all subgroups of group B, the results of K-reading obtained using the new effective index of refraction were statistically similar to the results obtained by clinical history method (P > .05). Automated K-reading statistically overestimated the K-reading values in subgroups 2, 3, and 4 of group B (P < .001). The use of the new corneal effective index of refraction allows for an accurate derivation of K-reading from the anterior radius of curvature.

  17. Variable discrete ordinates method for radiation transfer in plane-parallel semi-transparent media with variable refractive index

    Science.gov (United States)

    Sarvari, S. M. Hosseini

    2017-09-01

    The traditional form of discrete ordinates method is applied to solve the radiative transfer equation in plane-parallel semi-transparent media with variable refractive index through using the variable discrete ordinate directions and the concept of refracted radiative intensity. The refractive index are taken as constant in each control volume, such that the direction cosines of radiative rays remain non-variant through each control volume, and then, the directions of discrete ordinates are changed locally by passing each control volume, according to the Snell's law of refraction. The results are compared by the previous studies in this field. Despite simplicity, the results show that the variable discrete ordinate method has a good accuracy in solving the radiative transfer equation in the semi-transparent media with arbitrary distribution of refractive index.

  18. The influence of protein fractions and electrolyte imbalance on refractive index of serum in patients with multiple myeloma

    Science.gov (United States)

    Plotnikova, L.; Polyanichko, A.; Kobeleva, M.; Uspenskaya, M.; Garifullin, A.; Voloshin, S.

    2017-01-01

    Refractometric analysis is very rapid, accurate and simple method of analysis measuring refractive index of biological liquids such as serum, plasma, spinal fluid, urine. This method can be used for definition total protein and solids concentrations in serum. The value of refractive index depends on all substances in serum including proteins, lipids as well as low molecular weight compounds, for example ions of different metals. Refractometric analysis shows strong correlations between protein concentrations in serum of patients with multiple myeloma and its(serum) refractive index which depends on protein concentration and doesn’t depends on electrolyte disbalance.

  19. Nonlinear real index of refraction variations of a gas medium due to a monochromatic radiation near resonance

    International Nuclear Information System (INIS)

    Vasconcellos, J.I.C.

    1982-01-01

    The nonlinear real index of refraction variations of a gas medium due to a strong monochromatic radiation causing saturation effects is calculated. The gas is supposed to be composed of two-level molecules with which the external field is nearly resonant. It is assumed homogeneous (hard collisions, spontaneous decay) and inhomogeneous (Doppler effect) broadening mechanisms acting on the real index of refraction of the medium. The nonlinear dispersion of the medium is studied as a function of the detuning frequencies, saturation conditions and for various ratios between the homogeneous and inhomogeneous linewidths. In particular, the modification of the index of refraction due to saturation effects are emphasized. (Author) [pt

  20. Determination of the refractive index depth profile of an UV-laser generated waveguide in a planar polymer chip

    Energy Technology Data Exchange (ETDEWEB)

    Shams-el-Din, M.A.; Wochnowski, C.; Metev, S.; Hamza, A.A.; Jueptner, W

    2004-09-15

    In this paper the optical-functional properties of integrated-optical waveguides in a planar polymer chip prepared by UV-laser irradiation have been investigated. Particularly the refractive index distribution of the waveguide is examined by a two-beam interferometric method. Also the waveguiding effect of this integrated-optical structure has been proved. The study shows that the refractive index depth profile strongly depends on the UV-irradiation dose. Several mostly independently occurring photochemical processes competing with one another can explain the formation and shape of the refractive index distribution.

  1. Spectra, Index of Refraction, and Optical Constants of Nitrile Ices Relevant to Titan's Atmosphere

    Science.gov (United States)

    Moore, Marla; Hudson, Reggie; Ferrante, Robert; Moore, William

    Spectra and optical constants of nitrile ices known or suspected to be in Titan's atmosphere are presented from 2.5 to 200 microns (4000 to 50 cm-1 ). These results are relevant to the ongoing modeling of Cassini CIRS observations of Titan's winter pole. Ices studied include: HCN, hydrogen cyanide; C2 N2 , cyanogen; CH3 CN, acetonitrile; C2 H5 CN, propionitrile; and HC3 N, cyanoacetylene. For each of these molecules we report new measurements of the index of refraction, n, determined in both the amorphous-and crystalline-phase at 670 nm. Spectra were measured and optical constants were calculated for each nitrile at a variety of temperatures including 20, 35, 50, 75, 95, and 110 K, in the amorphous-and crystalline-phase. This laboratory effort uses a dedicated FTIR spectrometer to record transmission spectra of thin-film ice samples. Laser interference is used to measure film thickness during condensation onto a transparent cold window attached to the tail section of a closed-cycle helium cryo-stat. Optical constants, real (n) and imaginary (k) refractive indices, are determined using Kramers-Kronig (K-K) analysis. Our calculation reproduces the complete spectrum, including all interference effects. Index of refraction measurements are made in a separate dedicated FTIR spectrometer where interference deposit fringes are measured using two 670 nm lasers at different angles to the ice substrate. A survey of these new measurements will be presented along with a discussion of their validation, errors, and application to Titan data. We acknowledge Mark Loeffler who recently joined in our refractive index measurements. The authors also acknowledge support from the Cassini Data Analysis Program. RLH and MHM acknowledge additional funding from NASA's PGG and Outer Planets Programs, and the Goddard Center for Astrobiology.

  2. Laser-based refractive-index detection for capillary electrophoresis: ray-tracing interference theory.

    Science.gov (United States)

    Krattiger, B; Bruno, A E; Widmer, H M; Geiser, M; Dändliker, R

    1993-02-20

    The fringe pattern observed in a far field after a laser beam illuminates a fused silica capillary immersed in a refractive-index matching material and filled with an analyte fluid is exploited to develop a sensitive optical detector for capillary chemical analysis. The inner capillary interface splits the laser beam into a reflected beam fan and a refracted beam fan, which, on overlapping in the far field, lead to interferences. The intensity and the position of the fringes for capillaries with 250 microm >/= i.d. (inner diameter) >/= 25 microm are well reproduced by the presented model. The calculation predicts the fringe pattern for various beam/i.d. geometric configurations and is used to optimize the performance of the nanoliter-picoliter refractive-index on-column detection studied. It is found that the best contrast corresponds to a capillary that is illuminated with a beam waist of omega(0) ~ i.d./12, which is off-center focused with an offset of s ~ i.d./2. For a given interference pattern, the fringes that are found to be more sensitive to Deltan are those that appear near the optical axis but still retain high intensity and contrast. The sensitivity increases approximately linearly with the fringe number, and the maximal fringe number increases proportionally with the i.d.

  3. Optimization of the Refractive-Index Distribution of Graded-Index Polymer Optical Fiber by the Diffusion-Assisted Fabrication Process

    Science.gov (United States)

    Mukawa, Yoshiki; Kondo, Atsushi; Koike, Yasuhiro

    2012-04-01

    Graded-index polymer optical fiber (GI-POF) is a promising high-speed communication medium for very-short-reach networks, such as home or office networks. The refractive-index distribution of GI-POF needs to be accurately controlled to maximize the bandwidth. We attempted to control the refractive-index distribution by developing a simulation for dopant diffusion. In the rod-in-tube method, GI-POF with an optimal refractive-index distribution was obtained by adjusting the diffusion temperature and the diffusion time, whereas in the coextrusion process, GI-POF with an optimal refractive-index distribution was fabricated by controlling the length of the diffusion tube and the rate of discharge of polymer.

  4. Tomographic method for measurement of the gradient refractive index of the crystalline lens. I. The spherical fish lens.

    Science.gov (United States)

    Acosta, Eva; Vazquez, Daniel; Garner, Leon; Smith, George

    2005-03-01

    We present an iterative tomographic algorithm to reconstruct refractive-index profiles for meridional planes of the lens of the spherical fish eye from measurements of deflection angles of refracted rays. Numerical simulations show that the algorithm allows accuracy up to the fourth decimal place, provided that the refractive index can be regarded as an analytical function of the radial coordinate and the experimental errors are neglected. An experimental demonstration is given by applying the algorithm to retrieve the refractive-index profile of a spherical fish lens. The method is conceptually simple and does not require matching of the index of the surrounding medium to that of the surface of the lens, and the related iterative algorithm rapidly converges.

  5. Investigation of a pressure-dependent refractive index of germanium film with an optical fiber film sensor.

    Science.gov (United States)

    Yuan, Dongxu; Gao, Hongyun; Chen, Hao; Li, Min

    2018-02-01

    The refractive index of Ge is found in decline with applied pressure at a specific wavelength in the absorption region below 1900 nm, where the absorption coefficient rises dramatically with decreased wavelength. In this paper, we use a Ge-coated fiber optic probe to demonstrate quantitatively that the downward trend in the refractive index to increasing pressure matches the theoretically simulated optical properties of Ge with a measurement error of 1.03×10 -3 in the refractive index, which is further calculated within the framework of density functional theory with local density approximation. For the first time, to the best of our knowledge, both theoretical and experimental results prove that the refractive index reduces linearly with a gradient of -3.30×10 -4 /MPa as the pressure increases from 0 to 20 MPa.

  6. Water density and polarizability deduced from the refractive index determined by interferometric measurements up to 250 MPa.

    Science.gov (United States)

    Weiss, L; Tazibt, A; Tidu, A; Aillerie, M

    2012-03-28

    The refractive index of water is precisely determined in the visible light range as a function of the pressure until 250 MPa by means of a new measurement device that uses a special pipe tee included in an interferometer set. This technique allows revisiting the Bradley-Tait and Sellmeier equations to make them dependent on the wavelength and the pressure, respectively. The Bradley-Tait equation for the pressure dependence of the water refractive index is completed by a wavelength-dependent factor. Also, in the considered pressure and wavelength ranges, it is shown that the Sellmeier coefficients can be straightforwardly linked to the pressure, allowing the determination of the refractive index of water for either any wavelength or pressure. A new simple model allows the determination of the density of water as a function of the measured refractive index. Finally, the polarizability of water as function of pressure and wavelength is calculated by means of the Lorentz-Lorenz equation.

  7. Refractive-index changes in lithium niobate crystals by radiation damages; Brechungsindexaenderungen in Lithiumniobat-Kristallen durch Strahlenschaeden

    Energy Technology Data Exchange (ETDEWEB)

    Zamani Meymian, Mohammad Reza

    2007-12-18

    For the study in this thesis {sup 3}He{sup 2+} ions with the energy of about 40 MeV were applied. The results of these studies show a timely very stable anisotrope refractive-index change in the range of some 10{sup -3}. The radiation damages caused by ions cause a decreasement of the ordinary refractive index n{sub o} and an increasement of the extra-ordinary refractive index n{sub e}. While the absolute values for {delta}n{sub o} and {delta}n{sub e} are nearly equal the birefringence of the material (n{sub e}-n{sub o}) smaller. The generated refractive-index change is dose dependent and the curve {delta}n has at increasing dose a strongly nonlinear slope with a characteristic stage at the radiation dose of about 2 x 10{sup 20} ions/m{sup 2}.

  8. Multiple Fano-Like MIM Plasmonic Structure Based on Triangular Resonator for Refractive Index Sensing.

    Science.gov (United States)

    Jankovic, Nikolina; Cselyuszka, Norbert

    2018-01-19

    In this paper, we present a Fano metal-insulator-metal (MIM) structure based on an isosceles triangular cavity resonator for refractive index sensing applications. Due to the specific feeding scheme and asymmetry introduced in the triangular cavity, the resonator exhibits four sharp Fano-like resonances. The behavior of the structure is analyzed in detail and its sensing capabilities demonstrated through the responses for various refractive indices. The results show that the sensor has very good sensitivity and maximal figure of merit (FOM) value of 3.2 × 10⁵. In comparison to other similar sensors, the proposed one has comparable sensitivity and significantly higher FOM, which clearly demonstrates its high sensing potential.

  9. The influence of the atmospheric refractive index on radio Xmax measurements of air showers

    Directory of Open Access Journals (Sweden)

    Corstanje Arthur

    2017-01-01

    Full Text Available The refractive index of the atmosphere, which is n ≈ 1:0003 at sea level, varies with altitude and with local temperature, pressure and humidity. When performing radio measurements of air showers, natural variations in n will change the radio lateral intensity distribution, by changing the Cherenkov angle. Using CoREAS simulations, we have evaluated the systematic error on measurements of the shower maximum Xmax due to variations in n. It was found that a 10% increase in refractivity (n – 1 leads to an underestimation of Xmax between 8 and 22 g/cm2 for proton-induced showers at zenith angles from 15 to 45 degrees, respectively.

  10. A novel method to create high density stratification with matching refractive index for optical flow investigations

    Science.gov (United States)

    Krohn, Benedikt; Manera, Annalisa; Petrov, Victor

    2018-04-01

    Turbulent mixing in stratified environments represents a challenging task in experimental turbulence research, especially when large density gradients are desired. When optical measurement techniques like particle image velocimetry (PIV) are applied to stratified liquids, it is common practice to combine two aqueous solutions with different density but equal refractive index, to suppress particle image deflections. While refractive image matching (RIM) has been developed in the late 1970s, the achieved limit of 4% density ratio was not rivalled up to day. In the present work, we report a methodology, based on the behavior of excess properties and their change in a multicomponent system while mixing, that allows RIM for solutions with higher density differences. The methodology is then successfully demonstrated using a ternary combination of water, isopropanol and glycerol, for which RIM in presence of a density ratio of 8.6% has been achieved. Qualitative PIV results of a turbulent buoyant jet with 8.6% density ratio are shown.

  11. Fabrication quality analysis of a fiber optic refractive index sensor created by CO2 laser machining.

    Science.gov (United States)

    Chen, Chien-Hsing; Yeh, Bo-Kuan; Tang, Jaw-Luen; Wu, Wei-Te

    2013-03-26

    This study investigates the CO2 laser-stripped partial cladding of silica-based optic fibers with a core diameter of 400 μm, which enables them to sense the refractive index of the surrounding environment. However, inappropriate treatments during the machining process can generate a number of defects in the optic fiber sensors. Therefore, the quality of optic fiber sensors fabricated using CO2 laser machining must be analyzed. The results show that analysis of the fiber core size after machining can provide preliminary defect detection, and qualitative analysis of the optical transmission defects can be used to identify imperfections that are difficult to observe through size analysis. To more precisely and quantitatively detect fabrication defects, we included a tensile test and numerical aperture measurements in this study. After a series of quality inspections, we proposed improvements to the existing CO2 laser machining parameters, namely, a vertical scanning pathway, 4 W of power, and a feed rate of 9.45 cm/s. Using these improved parameters, we created optical fiber sensors with a core diameter of approximately 400 μm, no obvious optical transmission defects, a numerical aperture of 0.52 ± 0.019, a 0.886 Weibull modulus, and a 1.186 Weibull-shaped parameter. Finally, we used the optical fiber sensor fabricated using the improved parameters to measure the refractive indices of various solutions. The results show that a refractive-index resolution of 1.8 × 10(-4) RIU (linear fitting R2 = 0.954) was achieved for sucrose solutions with refractive indices ranging between 1.333 and 1.383. We also adopted the particle plasmon resonance sensing scheme using the fabricated optical fibers. The results provided additional information, specifically, a superior sensor resolution of 5.73 × 10(-5) RIU, and greater linearity at R2 = 0.999.

  12. Femtosecond refractive-index tailoring of an optical fiber and phase retrieval from far-field measurements

    DEFF Research Database (Denmark)

    Savolainen, Juha-Matti; Grüner-Nielsen, Lars; Kristensen, Poul

    2013-01-01

    A refractive-index change is written inside an optical fiber close to the end face by femtosecond laser light. The induced phase change is measured by analyzing the far-field intensity profiles before and after the irradiation.......A refractive-index change is written inside an optical fiber close to the end face by femtosecond laser light. The induced phase change is measured by analyzing the far-field intensity profiles before and after the irradiation....

  13. Simultaneous measurement of refractive index and thickness distributions using low-coherence digital holography and vertical scanning

    International Nuclear Information System (INIS)

    Watanabe, Kaho; Ohshima, Masashi; Nomura, Takanori

    2014-01-01

    The simultaneous measurement method of a refractive index distribution and a thickness distribution using low-coherence digital holography with a vertical scanning is proposed. The proposed method consists of a combination of digital holography and low-coherence interferometry. The introduction of a datum plane enables the measurement of both a refractive index distribution and a thickness distribution. By the optical experiment, the potential of the proposed method is confirmed. (paper)

  14. Material Structure of a Graded Refractive Index Lens in Decapod Squid

    Science.gov (United States)

    Cai, Jing; Heiney, Paul; Sweeney, Alison

    2013-03-01

    Underwater vision with a camera-type eye that is simultaneously acute and sensitive requires a spherical lens with a graded distribution of refractive index. Squids have this type of lens, and our previous work has shown that its optical properties are likely achieved with radially variable densities of a single protein with multiple isoforms. Here we measure the spatial organization of this novel protein material in concentric layers of the lens and use these data to suggest possible mechanisms of self-assembly of the proteins into a graded refractive index structure. First, we performed small angle x-ray scattering (SAXS) to study how the protein is spatially organized. Then, molecular dynamic simulation allowed us to correlate structure to the possible dynamics of the system in different regions of the lens. The combination of simulation and SAXS data in this system revealed the likely protein-protein interactions, resulting material structure and its relationship to the observed and variable optical properties of this graded index system. We believe insights into the material properties of the squid lens system will inform the invention of self-assembling graded index devices.

  15. Effect of Refractive Index of Substrate on Fabrication and Optical Properties of Hybrid Au-Ag Triangular Nanoparticle Arrays

    Directory of Open Access Journals (Sweden)

    Jing Liu

    2015-05-01

    Full Text Available In this study, the nanosphere lithography (NSL method was used to fabricate hybrid Au-Ag triangular periodic nanoparticle arrays. The Au-Ag triangular periodic arrays were grown on different substrates, and the effect of the refractive index of substrates on fabrication and optical properties was systematically investigated. At first, the optical spectrum was simulated by the discrete dipole approximation (DDA numerical method as a function of refractive indexes of substrates and mediums. Simulation results showed that as the substrates had the refractive indexes of 1.43 (quartz and 1.68 (SF5 glass, the nanoparticle arrays would have better refractive index sensitivity (RIS and figure of merit (FOM. Simulation results also showed that the peak wavelength of the extinction spectra had a red shift when the medium’s refractive index n increased. The experimental results also demonstrated that when refractive indexes of substrates were 1.43 and 1.68, the nanoparticle arrays and substrate had better adhesive ability. Meanwhile, we found the nanoparticles formed a large-scale monolayer array with the hexagonally close-packed structure. Finally, the hybrid Au-Ag triangular nanoparticle arrays were fabricated on quartz and SF5 glass substrates and their experiment extinction spectra were compared with the simulated results.

  16. An integrated solution for mold shape modification in precision glass molding to compensate refractive index change and geometric deviation

    Science.gov (United States)

    Su, Lijuan; Wang, Fei; He, Peng; Dambon, Olaf; Klocke, Fritz; Yi, Allen Y.

    2014-02-01

    In precision glass molding, refractive index change and geometric deviation (or curve change as often referred to in industry) occurred during molding process can result in substantial amount of aberrations. Previously, refractive index change and geometric deviation were investigated in separate studies by the authors. However, optical performance of a molded glass lens depends on both refractive index and geometry. In order to mold lenses with optimal performance, both refractive index change and geometric deviation have to be taken into consideration simultaneously and compensated. This paper presented an integrated compensation procedure for modifying molds to compensate both refractive index change and geometric deviation. Group refractive index change predicted by the finite element method simulation was used to provide a modified geometry design for a desired lens. Geometric deviations of molded glass lenses with the modified design were analyzed with a previously developed numerical simulation approach, which is used to modify the mold shape. This procedure was validated by molding a generic aspherical glass lens. Both geometry and optical measurement results confirmed that the molded lens performed as specified by the original design. It also demonstrated that finite element method assisted compensation procedure can be used to predict the final optical performance of compression molded glass components. This research provided an opportunity for optics manufacturers to achieve better performance lens while maintaining lower cost and a shorter cycle time.

  17. A Comparison of Kretschmann-Raether Angular Regimes for Measuring Changes in Bulk Refractive Index

    Energy Technology Data Exchange (ETDEWEB)

    KASUNIC, K.J.

    1999-09-16

    We compare 2 angular regimes for the measurement of changes in the real refractive index of bulk fluid analytes. The measurements are based on the use of the Kretschmann-Raether configuration to sense a change in reflectivity with index. Specifically, we numerically simulate the relative sensitivities of the total internal reflection (TIR) and surface-plasmon resonance (SPR) regimes. For a fixed-angle apparatus, the method which gives the greatest change in reflectivity varies with metal film thickness. For films thicker than the skin depth, the SPR regime is the most sensitive to index changes. For thinner films, however, the TIR angle is then dominant, with increases in sensitivity on the order of 75% for 10 nm gold or silver media.

  18. Refractive index and temperature sensing in anisotropic silver nanostructures with stable photo-physical properties

    Science.gov (United States)

    Biswas, Subrata; Kumbhakar, Pathik

    2018-01-01

    In this report, we have demonstrated the refractive index and temperature-sensing abilities of polyvinylpyrrolidone (PVP)-protected silver nanostructures of triangular, connected and plate-like shapes. Interestingly, these nanostructures even after 2 and ½ years of syntheses showed plasmonic-sensing ability of temperature in the temperature range of 283-333 K. Also, refractive index (R.I.) sensing has been demonstrated in the aged samples and obtained the highest R.I. sensitivity of 306 nm/RIU in one of the sample. The synthesized samples have been kept in dark (inside desiccators) intentionally for the extended period of 2 and ½ years after synthesis and monitored intermittently their UV-Vis absorption and photoluminescence (PL) emission characteristics to check the functionally of the aged silver nanostructures. It has been found the samples remain well dispersed in different solvents and can forbid agglomeration even in 0.25 M NaCl solution. We have also demonstrated here fabrication of a flexible and transparent thin film of the synthesized samples in polyvinyl alcohol (PVA) matrix and investigated its low power continuous-wave (CW) nonlinear optical properties using spatial self-phase modulation (SSPM) technique. The nonlinear refractive index ( n 2) value of the film has been determined to be 5.6 × 10- 6 cm2/W at the He-Ne laser wavelength of 632.8 nm. In this report we have demonstrated temperature and R.I. sensing and also it has been demonstrated that the synthesized samples remain functional even after 2 and ½ years of synthesis. Also, samples may find potential applications in nonlinear optical phase modulation devices.

  19. Index of refraction and mechanical behavior of soda lime glass under shock and release wave propagations

    Science.gov (United States)

    Dandekar, Dattatraya P.

    1998-12-01

    This article reports a set of experiments designed to measure change in the refractive index of transparent material under both planar shock and release wave propagations. Information about both mechanical and optical properties of transparent material were obtained simultaneously through the measurement of particle velocity at or near the impact surface and the free surface velocity. Data thus obtained is used to determine shock and release wave velocities and the Hugoniot elastic limit (HEL) of the material. Shock wave velocity in soda lime glass remains unchanged at 5.83±0.04 km/s, i.e., equal to the measured ultrasonic longitudinal wave velocity, when it is shock compressed to less than or equal to 4.3 GPa. The value of shock wave velocity begins to decline when the impact stress in the glass exceeds this value. The release wave velocity, however, remains equal to the measured ultrasonic longitudinal wave velocity to only 3 GPa, it begins to decline at higher stresses. The variation in the refractive index of the glass shows a cusp at 3.04-3.14 GPa. Additionally, up to and including the impact stress of 3.14 GPa, the refractive index after shock compression and release is within 1% of its ambient value, but at higher stresses it differs by larger percentage points. The HEL of the glass is determined to be 3.10±0.06 GPa although it lacks the classic well defined cusp in all the recorded wave profiles of soda lime glass.

  20. Thermodynamic study of three pharmacologically significant drugs: Density, viscosity, and refractive index measurements at different temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Iqbal, Muhammad Javed [Department of Chemistry, Quaid-i-Azam University, Islamabad 45320 (Pakistan)], E-mail: mjiqauchem@yahoo.com; Chaudhry, Mansoora Ahmed [Department of Chemistry, Quaid-i-Azam University, Islamabad 45320 (Pakistan)

    2009-02-15

    Measurements of density, viscosity, and refractive index of three pharmacologically significant drugs, i.e. diclofenac sodium, cetrizine, and doxycycline have been carried in aqueous medium at T = (293.15 to 313.15) K. An automated vibrating-tube densimeter, viscometer, and refractometer are used in a concentration range from (7.5) . 10{sup -3} to 25 . 10{sup -3}) mol . kg{sup -1}. The precise density results are used to evaluate the apparent molar volume, partial molar volume, thermal expansion coefficient, partial molar expansivity, and the Hepler's constant. Viscosity results are used to calculate the Jones-Dole viscosity B-coefficient, free energy of activation of the solute and solvent, activation enthalpy, and activation entropy. The molar refractive indices of the drug solutions can be employed to calculate molar refraction. It is inferred from these results that the above mentioned drugs act as structure-making compounds due to hydrophobic hydration of the molecules in the drugs.

  1. The electromagnetically induced negative refractive index in the Er3+:YAlO3 crystal

    International Nuclear Information System (INIS)

    Liu Chunxu; Zhang Jisen; Liu Junye; Jin Guang

    2009-01-01

    We carried out the negative refractive index in the solid medium Er 3+ :YAlO 3 crystal with a Λ-type four-level scheme proposed for atomic vapour by Thommen and Mandel, and Kaestel (Phys. Rev. Lett. 2006 96 053601 and 2007 98 069301) based on quantum interference and electromagnetically induced transparency (EIT). The results show that the frequency band with the negative index is much wider (∼1 MHz) than reported previously. Usually, Im[n] is always positive, corresponding to absorption, and the figure of merit (FOM, the ratio of real to imaginary, namely |Re[n]/Im[n]|) is only on the order of unity. We achieve FOM |Re[n]/Im[n]| = 4.6. The corresponding negative Im[n] is related to the stimulated emission of 4 I 13/2 → 4 I 15/2 of the rare earth ion Er 3+ under external electromagnetic fields. It is concluded that the rare earth ion doped material with abundant energy levels and various electric and magnetic transitions is an outstanding and practical candidate for the electromagnetically induced negative refractive index material.

  2. Broadband Terahertz Refraction Index Dispersion and Loss of Polymeric Dielectric Substrate and Packaging Materials

    Science.gov (United States)

    Motaharifar, E.; Pierce, R. G.; Islam, R.; Henderson, R.; Hsu, J. W. P.; Lee, Mark

    2018-01-01

    In the effort to push the high-frequency performance of electronic circuits and signal interconnects from millimeter waves to beyond 1 THz, a quantitative knowledge of complex refraction index values and dispersion in potential dielectric substrate, encapsulation, waveguide, and packaging materials becomes critical. Here we present very broadband measurements of the real and imaginary index spectra of four polymeric dielectric materials considered for use in high-frequency electronics: benzocyclobutene (BCB), polyethylene naphthalate (PEN), the photoresist SU-8, and polydimethylsiloxane (PDMS). Reflectance and transmittance spectra from 3 to 75 THz were made using a Fourier transform spectrometer on freestanding material samples. These data were quantitatively analyzed, taking into account multiple partial reflections from front and back surfaces and molecular bond resonances, where applicable, to generate real and imaginary parts of the refraction index as a function of frequency. All materials showed signatures of infrared active organic molecular bond resonances between 10 and 50 THz. Low-loss transmission windows as well as anti-window bands of high dispersion and loss can be readily identified and incorporated into high-frequency design models.

  3. Determining the unique refractive index properties of solid polystyrene aerosol using broadband Mie scattering from optically trapped beads.

    Science.gov (United States)

    Jones, Stephanie H; King, Martin D; Ward, Andrew D

    2013-12-21

    A method is described to measure the refractive index dispersion with wavelength of optically trapped solid particles in air. Knowledge of the refraction properties of solid particles is critical for the study of aerosol; both in the laboratory and in the atmosphere for climate studies. Single micron-sized polystyrene beads were optically trapped in air using a vertically aligned counter-propagating configuration of focussed laser beams. Each bead was illuminated using white light from a broadband light emitting diode (LED) and elastic scattering within the bead was collected onto a spectrograph. The resulting Mie spectra were analysed to accurately determine polystyrene bead radii to ±0.4 nm and values of the refractive index to ±0.0005 over a wavelength range of 480-700 nm. We demonstrate that optical trapping combined with elastic scattering can be used to both accurately size polystyrene beads suspended in air and determine their wavelength dependent refractive index. The refractive index dispersions are in close agreement with reported values for polystyrene beads in aqueous dispersion. Our results also demonstrate a variation in the refractive index of polystyrene, from bead to bead, in a commercial sample. The measured variation highlights that care must be taken when using polystyrene beads as a calibration aerosol.

  4. Thickness-dependent dispersion parameters, energy gap and nonlinear refractive index of ZnSe thin films

    Energy Technology Data Exchange (ETDEWEB)

    Prakash, Deo [School of Computer Science & Engineering, Faculty of Engineering, SMVD University, Kakryal, Katra 182320, J& K (India); Shaaban, E.R., E-mail: esam_ramadan2008@yahoo.com [Physics Department, Faculty of Science, Al-Azhar University, Assiut 71542 (Egypt); Shapaan, M. [Department of Physics, Faculty of Science, Al-Azahar University, Cairo (Egypt); Mohamed, S.H. [Physics Department, Faculty of Science, Sohag University, 82524 Sohag (Egypt); Othman, A.A. [Physics Department, Faculty of Science, Assiut University, Assiut 71516 (Egypt); Verma, K.D., E-mail: kdverma1215868@gmail.com [Material Science Research Laboratory, Department of Physics, S. V. College, Aligarh 202001, U.P. (India)

    2016-08-15

    Highlights: • Combined experimental and theoretical researches on ZnSe Thin Films. • The film thickness and refractive index were determined using envelope method. • The absorption coefficient and the energy gap were calculated. • Dispersion parameters were determined using Wemple-DiDomenico relation. • The third order susceptibility and nonlinear refractive index were calculated. - Abstract: Zinc selenide (ZnSe) thin films with different thicknesses were evaporated onto glass substrates using the thermal evaporation technique. X-ray diffraction analysis confirmed that both the film and powder have cubic zinc-blende structure. The fundamental optical parameters like absorption coefficient, extinction coefficient and band gap were evaluated in transparent region of transmittance and reflectance spectrum. The optical transition of the films was found to be allowed, where the energy gap increased from 2.576 to 2.702 eV with increasing film thickness. Also, the refractive index value increase with increasing film thickness. The refractive indices evaluated through envelope method were extrapolated by Cauchy dispersion relationship over the whole spectra range. Additionally, the dispersion of refractive index was determined in terms of Wemple-DiDomenico single oscillator model. Third order susceptibility and nonlinear refractive index were determined for different thickness of ZnSe thin films.

  5. Large and tunable negative refractive index via electromagnetically induced chirality in a semiconductor quantum well nanostructure

    Science.gov (United States)

    Zhao, Sh.-C.; Zhang, Sh.-Y.; Xu, Y.-Y.

    2014-11-01

    Large and tunable negative refractive index (NRI) via electromagnetically induced chirality is demonstrated in a semiconductor quantum wells (SQWs) nanostructure by using the reported experimental parameters in J.F. Dynes et al., Phys. Rev. Lett. 94, 157403 (2005). It is found: the large and controllable NRI with alterable frequency regions is obtained when the coupling laser field and the relative phase are modulated, which will increase the flexibility and possibility of implementing NRI in the SQWs nanostructure. The scheme rooted in the experimental results may lead a new avenue to NRI material in solid-state nanostructure.

  6. 2-D isotropic negative refractive index in a N-type four-level atomic system

    Science.gov (United States)

    Zhao, Shun-Cai; Wu, Qi-Xuan; Ma, Kun

    2015-11-01

    2-D(Two-dimensional) isotropic negative refractive index (NRI) is explicitly realized via the orthogonal signal and coupling standing-wave fields coupling the Ntype four-level atomic system. Under some key parameters of the dense vapour media, the atomic system exhibits isotropic NRI with simultaneous negative permittivity and permeability (i.e. left-handedness) in the 2-D x-y plane. Compared with other 2-D NRI schemes, the coherent atomic vapour media in our scheme may be an ideal 2-D isotropic NRI candidate and has some potential advantages, significance or applications in the further investigation.

  7. Random Estimate the values of seed oil of Cucurbita maxima by refractive index method.

    Science.gov (United States)

    Saxena, R B

    2010-01-01

    The crude oil having lower iodine and free fatty acids values has Aamdosha properties. These properties are present due to toxic and anti-toxic compounds. These compounds can be harmful for the special diseases and may be unsaturated, saturated, open chain etc. The adulteration can take part as catalytic action for the toxic effect for the special diseases. Toxic properties of oils are removed by different ingrediants and methods. C. maxima seed tail (mst) is used with food and medicine. The present paper deals with the study of oil by refractive index and equations.

  8. Transmission and refractive index sensing based on Fano resonance in MIM waveguide-coupled trapezoid cavity

    Directory of Open Access Journals (Sweden)

    Jinli Zhou

    2017-01-01

    Full Text Available A metal–insulator–metal (MIM waveguide-coupled trapezoid cavity is presented, and the transmission properties are investigated by finite-element method. Results show that an asymmetric Fano profile emerged in the transmission spectrum, which was caused by the asymmetrical break of the MIM waveguide-coupled trapezoid cavity system. A refractive index sensitivity, Q-factor and FOM of approximately 750nm/RIU, 68.3 and 65.2 were measured based on the Fano resonance. The effect of the structural parameters on the transmission properties is also investigated. The results provide a new possibility for designing high-performance plasmonic devices.

  9. The effect of refractive index changes in an intracavity absorption on the laser output power

    International Nuclear Information System (INIS)

    Al-Hawat, Sh.; Eskef, M.

    2007-10-01

    A model describing the intra-cavity absorption has been developed. The model allows for a reliable description of the attenuation of laser power as a function of the gas pressure inside the absorption cell, conducting both real and imaginary parts of the refractive index of the absorbing gas. The model relies on an adequate integration of the additional loss due to the absorption into the rate equations. After that the rate equations are solved under steady state conditions, which is quite reliable for a cw CO 2 laser. The oscillation, clearly observed in case of weak absorption, is described in the framework of an interference model considering the electric field inside the cavity as the interference result of successive phase correlated waves differing from each other in the number of passes made through the cavity. The phase shift is determined by the optical length of the cavity depending on the real part of the refractive index of the gas in the absorption cell. The model has been applied to analyze a large set of attenuation curves obtained in a previous work, in which intra-cavity absorption was measured for the three gases CFC-11, 12, 22 using a tunable cw CO 2 laser at 44 lines of the emission spectrum of the CO 2 molecule distributed on the branches P and R of the two bands at 9.6 μm and 10.6 μm. For mostly all examples, the value of the absorption cross section (imaginary part of the refractive index) has been determined by fitting the model to the experimental data. Furthermore, the value of the linear polarizability (real part of the refractive index) has been calculated from the oscillation period for all examples, in which the attenuation curve exhibits reliable oscillating behavior. The results are in fair agreement with the values of the absorption cross section published in the Hitran data base, as well as with the results obtained from independent absorption measurements performed outside the cavity (Author)

  10. Tiny optical fiber temperature sensor based on temperature-dependent refractive index of zinc telluride film

    Science.gov (United States)

    Bian, Qiang; Song, Zhangqi; Song, Dongyu; Zhang, Xueliang; Li, Bingsheng; Yu, Yang; Chen, Yuzhong

    2018-03-01

    The temperature-dependent refractive index of zinc telluride film can be used to develop a tiny, low cost and film-coated optical fiber temperature sensor. Pulse reference-based compensation technique is used to largely reduce the background noise which makes it possible to detect the minor reflectivity change of the film in different temperatures. The temperature sensitivity is 0.0034dB/° and the background noise is measured to be 0.0005dB, so the resolution can achieve 0.2°.

  11. Periodical rocking long period gratings in PANDA fibers for high temperature and refractive index sensing

    Science.gov (United States)

    Jin, Wa; Bi, Wei-hong; Fu, Xing-hu; Fu, Guang-wei

    2017-09-01

    We report periodical rocking long period gratings (PR-LPGs) in PANDA fibers fabricated with CO2 laser. The PR-LPGs achieve very high coupling efficiency of 19 dB with 12 periods and a 3.5° twist angle in just one scanning cycle, which is much more effective than the conventional CO2 laser fabrication technique. This type of LPGs exhibits polarization-selective resonance dips which demonstrate different sensitivities to environmental parameters. The high temperature and external refractive index sensitivities are measured simultaneously, so it can be used as a wavelength-selective polarization filter and sensor.

  12. Optical absorption and refractive index near the band gap for InGaAsP

    International Nuclear Information System (INIS)

    Kowalsky, W.; Wehmann, H.H.; Fiedler, F.; Schlachetzki, A.

    1983-01-01

    The optical absorption coefficient α and the refractive index n were measured for a quaternary alloy with bandgap-equivalent wavelength of 1.17 μm and for the ternary alloy, both lattice-matched to InP. α in dependence on the wavelength is characteristic of a direct semiconductor, but with a relative maximum on the order of 50 meV away from the bandgap in the small-absorption range. This peak is tentatively assigned to an acceptor impurity

  13. Refrigerant concentration measurement at compressor oil sump by refractive index (concentration of R410A in PVE oil)

    Energy Technology Data Exchange (ETDEWEB)

    Fukuta, Mitsuhiro; Ito, Masahiro; Yanagisawa, Tadashi; Ogi, Yasuhiro [Department of Mechanical Engineering, Shizuoka University, 3-5-1 Johoku, Naka-ku, Hamamatsu 432-8561 (Japan)

    2010-03-15

    The dissolution of refrigerant into refrigeration oil has great influence on oil viscosity. In this study, a refractive index measurement is applied to measure the refrigerant concentration in the oil at a compressor oil sump. Although the refractive index of the oil/refrigerant mixture is correlated with the refrigerant concentration using the refractive indices of the oil and the refrigerant, the temperature of the oil in the compressor is so high that the refractive index of the refrigerant cannot be defined because the temperature surpasses the critical temperature of the refrigerant. Therefore the correlation under such high temperature conditions is examined. It is found to be reasonable to use the refractive index of the refrigerant derived by an extrapolation of the refractive indices of the saturated liquid refrigerant under a sub-critical condition. In addition, a transient measurement of the refrigerant concentration in the oil was carried out in a practically operated compressor. Although the output signal of the sensor is disturbed by bubbles generated during the separation of the refrigerant from the oil, a data processing procedure which eliminates the over-ranged signal and averages the output within a certain time period is proposed for eliminating the influence of the bubbles. (author)

  14. Is the nuclear refractive index lower than cytoplasm? Validation of phase measurements and implications for light scattering technologies.

    Science.gov (United States)

    Steelman, Zachary A; Eldridge, Will J; Weintraub, Jacob B; Wax, Adam

    2017-12-01

    The refractive index (RI) of biological materials is a fundamental parameter for the optical characterization of living systems. Numerous light scattering technologies are grounded in a quantitative knowledge of the refractive index at cellular and subcellular scales. Recent work in quantitative phase microscopy (QPM) has called into question the widely held assumption that the index of the cell nucleus is greater than that of the cytoplasm, a result which disagrees with much of the current literature. In this work, we critically examine the measurement of the nuclear and whole-cell refractive index using QPM, validating that nuclear refractive index is lower than that of cytoplasm in four diverse cell lines and their corresponding isolated nuclei. We further examine Mie scattering and phase-wrapping as potential sources of error in these measurements, finding they have minimal impact. Finally, we use simulation to examine the effects of incorrect RI assumptions on nuclear morphology measurements using angle-resolved scattering information. Despite an erroneous assumption of the nuclear refractive index, accurate measurement of nuclear morphology was maintained, suggesting that light scattering modalities remain effective. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Determination of continuous complex refractive index dispersion of biotissue based on internal reflection

    Science.gov (United States)

    Deng, Zhichao; Wang, Jin; Ye, Qing; Sun, Tengqian; Zhou, Wenyuan; Mei, Jianchun; Zhang, Chunping; Tian, Jianguo

    2016-01-01

    The complex refractive index dispersion (CRID), which contains the information on the refractive index dispersion and extinction coefficient spectra, is an important optical parameter of biotissue. However, it is hard to perform the CRID measurement on biotissues due to their high scattering property. Continuous CRID measurement based on internal reflection (CCRIDM-IR) is introduced. By using a lab-made apparatus, internal reflectance spectra of biotissue samples at multiple incident angles were detected, from which the continuous CRIDs were calculated based on the Fresnel formula. Results showed that in 400- to 750-nm range, hemoglobin solution has complicated dispersion and extinction coefficient spectra, while other biotissues have normal dispersion properties, and their extinction coefficients do not vary much with different wavelengths. The normal dispersion can be accurately described by several coefficients of dispersion equations (Cauchy equation, Cornu equation, and Conrady equation). To our knowledge, this is the first time that the continuous CRID of scattering biotissue over a continuous spectral region is measured, and we hereby have proven that CCRIDM-IR is a good method for continuous CRID research of biotissue.

  16. Anisotropic power spectrum of refractive-index fluctuation in hypersonic turbulence.

    Science.gov (United States)

    Li, Jiangting; Yang, Shaofei; Guo, Lixin; Cheng, Mingjian

    2016-11-10

    An anisotropic power spectrum of the refractive-index fluctuation in hypersonic turbulence was obtained by processing the experimental image of the hypersonic plasma sheath and transforming the generalized anisotropic von Kármán spectrum. The power spectrum suggested here can provide as good a fit to measured spectrum data for hypersonic turbulence as that recorded from the nano-planar laser scattering image. Based on the newfound anisotropic hypersonic turbulence power spectrum, Rytov approximation was employed to establish the wave structure function and the spatial coherence radius model of electromagnetic beam propagation in hypersonic turbulence. Enhancing the anisotropy characteristics of the hypersonic turbulence led to a significant improvement in the propagation performance of electromagnetic beams in hypersonic plasma sheath. The influence of hypersonic turbulence on electromagnetic beams increases with the increase of variance of the refractive-index fluctuation and the decrease of turbulence outer scale and anisotropy parameters. The spatial coherence radius was much smaller than that in atmospheric turbulence. These results are fundamental to understanding electromagnetic wave propagation in hypersonic turbulence.

  17. Extraction of light trapped due to total internal reflection using porous high refractive index nanoparticle films.

    Science.gov (United States)

    Mao, Peng; Sun, Fangfang; Yao, Hanchao; Chen, Jing; Zhao, Bo; Xie, Bo; Han, Min; Wang, Guanghou

    2014-07-21

    TiO₂ nanoparticle layers composed of columnar TiO₂ nanoparticle piles separated with nanoscale pores were fabricated on the bottom surface of the hemispherical glass prism by performing gas phase cluster beam deposition at glancing incidence. The porosity as well as the refractive index of the nanoparticle layer was precisely tuned by the incident angle. Effective extraction of the light trapped in the substrate due to total internal reflection with the TiO₂ nanoparticle layers was demonstrated and the extraction efficiency was found to increase with the porosity. An enhanced Rayleigh scattering mechanism, which results from the columnar aggregation of the nanoparticles as well as the strong contrast in the refractive index between pores and TiO₂ nanoparticles in the nanoporous structures, was proposed. The porous TiO₂ nanoparticle coatings were fabricated on the surface of GaN LEDs to enhance their light output. A nearly 92% PL enhancement as well as a 30% EL enhancement was observed. For LED applications, the enhanced light extraction with the TiO₂ nanoparticle porous layers can be a supplement to the microscale texturing process for light extraction enhancement.

  18. Low refractive index SiOF thin films prepared by reactive magnetron sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Garcia, F.J.; Gil-Rostra, J.; Terriza, A.; González, J.C.; Cotrino, J. [Instituto de Ciencia de Materiales de Sevilla, CSIC, Univ. Sevilla, Av. Américo Vespucio 49, E-41092 Sevilla (Spain); Frutos, F. [Departamento de Física Aplicada, E.T.S. Ingeniería Informática, University of Seville, Avd. Reina Mercedes s/n, E-41012 Seville (Spain); Ferrer, F.J. [Centro Nacional de Aceleradores, CSIC, Univ. Sevilla, Junta Andalucia, Thomas A. Edison 7, E-41092 Sevilla (Spain); González-Elipe, A.R. [Instituto de Ciencia de Materiales de Sevilla, CSIC, Univ. Sevilla, Av. Américo Vespucio 49, E-41092 Sevilla (Spain); Yubero, F., E-mail: yubero@icmse.csic.es [Instituto de Ciencia de Materiales de Sevilla, CSIC, Univ. Sevilla, Av. Américo Vespucio 49, E-41092 Sevilla (Spain)

    2013-09-02

    We have studied low refractive index fluorine doped silica thin films prepared by reactive magnetron sputtering. Two experimental parameters were varied to increase the porosity of the films, the geometry of the deposition process (i.e., the use of glancing angle deposition) and the presence of chemical etching agents (fluorine species) at the plasma discharge during film growth. The microstructure, chemistry, optical properties, and porosity of the films have been characterized by scanning electron and atomic force microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, UV–vis, and spectroscopic ellipsometry. It is found that either the deposition at glancing angles or the incorporation of CF{sub x} species in the plasma discharge during film growth produces a decrease in the refractive index of the deposited films. The combined effect of the two experimental approaches further enhances the porosity of the films. Finally, the films prepared in a glancing geometry exhibit negative uniaxial birefringence. - Highlights: • SiOF thin films with controlled porosity prepared by reactive magnetron sputtering • Incorporation of CF{sub x} precursors in the plasma discharge enhances film porosity. • Deposition at glancing geometries further increases void fraction within the films.

  19. Surface Plasmon Scattering in Exposed Core Optical Fiber for Enhanced Resolution Refractive Index Sensing.

    Science.gov (United States)

    Klantsataya, Elizaveta; François, Alexandre; Ebendorff-Heidepriem, Heike; Hoffmann, Peter; Monro, Tanya M

    2015-09-29

    Refractometric sensors based on optical excitation of surface plasmons on the side of an optical fiber is an established sensing architecture that has enabled laboratory demonstrations of cost effective portable devices for biological and chemical applications. Here we report a Surface Plasmon Resonance (SPR) configuration realized in an Exposed Core Microstructured Optical Fiber (ECF) capable of optimizing both sensitivity and resolution. To the best of our knowledge, this is the first demonstration of fabrication of a rough metal coating suitable for spectral interrogation of scattered plasmonic wave using chemical electroless plating technique on a 10 μm diameter exposed core of the ECF. Performance of the sensor in terms of its refractive index sensitivity and full width at half maximum (FWHM) of SPR response is compared to that achieved with an unstructured bare core fiber with 140 μm core diameter. The experimental improvement in FWHM, and therefore the detection limit, is found to be a factor of two (75 nm for ECF in comparison to 150 nm for the large core fiber). Refractive index sensitivity of 1800 nm/RIU was achieved for both fibers in the sensing range of aqueous environment (1.33-1.37) suitable for biosensing applications.

  20. Low-loss planar metamaterials electromagnetically induced transparency for sensitive refractive index sensing

    Science.gov (United States)

    Tian, Ying; Hu, Sen; Huang, Xiaojun; Yu, Zetai; Lin, Hai; Yang, Helin

    2017-10-01

    A low-loss and high transmission electromagnetically induced transparency like (EIT- like) structure is experimentally and numerically demonstrated in this paper. The proposed planar structure based on EIT-like metamaterial consists of two separate split-ring resonators, and its resulting transmission level can maximally reach 0.89 with significant suppression of radiation loss. According to the effective medium theory, the imaginary parts of the effective permittivity and permeability of the metamaterial are used as the evidence of low-loss. In the analysis, the simulated surface current, magnetic field distribution and coupled oscillator model reveal the principle of high transmittance EIT-effect. Furthermore, the peak of transparency frequency is highly sensitive to the variation of refractive index in the background medium. The sensor based on the proposed EIT structure can achieve a sensitivity of 1.69 GHz/RIU (refractive index unit) and a figure of merit of 11.66. Such metamaterials have potential perspectives in sensing and chiral slow light devices.

  1. Mid-infrared refractive index sensing using optimized slotted photonic crystal waveguides

    Science.gov (United States)

    Kassa-Baghdouche, Lazhar; Cassan, Eric

    2018-02-01

    Slotted photonic crystal waveguides (SPCWs) were designed to act as refractive index sensing devices at mid-infrared (IR) wavelengths around λ = 3.6 μm. In particular, effort was made to engineer the input and output slot waveguide interfaces in order to increase the effective sensitivity through resonant tapering. A slotted PhC waveguide immersed in air and liquid cladding layers was considered. To determine the performance of the sensor, the sensitivity of the device was estimated by calculating the shift in the upper band edge of the output transmission spectrum. The results showed that the sensitivity of a conventionally designed SPCW followed by modifications in the structure parameter yielded a 510 nm shift in the wavelength position of the upper band edge, indicating a sensitivity of more than 1150 nm per refractive index unit (RIU) with an insertion loss level of -0.3 dB. This work demonstrates the viability of photonic crystal waveguide high sensitivity devices in the Mid-IR, following a transposition of the concepts inherited from the telecom band and an optimization of the design, in particular a minimization of photonic device insertion losses.

  2. Fundamental processes of refractive index modifications during femtosecond laser waveguide writing

    Science.gov (United States)

    Schaefer, D.; Schnitzler, D.; Kelbassa, I.

    2013-03-01

    By using focused ultrashort pulsed laser radiation refractive index modifications are induced in glass in order to generate optical components. The understanding of physically fundamental processes induced by laser radiation is the basis for the systematic control and maximization of the refractive index change for the realization of three-dimensional, optical components for integrated optics like in-volume waveguides. In this paper fundamental processes which are induced by focused laser radiation in the volume of borosilicate glass D263 and fused silica are investigated. The glass materials are structured by laser radiation in the infrared spectral range (λ=1045nm). By using femtosecond laser pulses with high repetition rates (f = 500 kHz), thermal processes like heat accumulation effects are induced leading to heat affected zones and thus waveguide cross sections with dimensions larger than the focal spot. The absorptivity during modification in relation to the applied pulse energy is measured for different repetition rates in both glass materials. Furthermore, the laser induced structural change in the glass matrix by the increase of three- and four-membered ring structures is proved with Raman spectroscopy.

  3. Near-infrared refractive index of synthetic single crystal and polycrystalline diamonds at high temperatures

    Science.gov (United States)

    Yurov, V. Yu.; Bushuev, E. V.; Popovich, A. F.; Bolshakov, A. P.; Ashkinazi, E. E.; Ralchenko, V. G.

    2017-12-01

    We measured the refractive index n(T) and thermo-optical coefficient β(T) = (1/n)(dn/dT) of high quality synthetic diamonds from room temperature to high temperatures, up to 1520 K, in near-infrared spectral range at wavelength 1.56 μm, using a low-coherence interferometry. A type IIa single crystal diamond produced by high pressure-high temperature technique and a transparent polycrystalline diamond grown by chemical vapor deposition were tested and revealed a very close n(T) behavior, with n = 2.384 ± 0.001 at T = 300 K, monotonically increasing to 2.428 at 1520 K. The n(T) data corrected to thermal expansion of diamond are well fitted with 3rd order polynomials, and alternatively, with the Bose-Einstein model with an effective oscillator frequency of 970 cm-1. Almost linear n(T) dependence is observed above 800 K. The thermo-optical coefficient is found to increase monotonically from (0.6 ± 0.1) × 10-5 K-1 (300 K) to (2.0 ± 0.1) × 10-5 K-1 (1300 K) with a tendency to saturation at >1200 K. These β(T) values are an order of magnitude lower than those known for Si, GaAs, and InP. The obtained results significantly extend the temperature range, where the refractive index of diamond was previously measured.

  4. Refractive index dispersion of swift heavy ion irradiated BFO thin films using Surface Plasmon Resonance technique

    Science.gov (United States)

    Paliwal, Ayushi; Sharma, Savita; Tomar, Monika; Singh, Fouran; Gupta, Vinay

    2016-07-01

    Swift heavy ion irradiation (SHI) is an effective technique to induce defects for possible modifications in the material properties. There is growing interest in studying the optical properties of multiferroic BiFeO3 (BFO) thin films for optoelectronic applications. In the present work, BFO thin films were prepared by sol-gel spin coating technique and were irradiated using the 15 UD Pelletron accelerator with 100 MeV Au9+ ions at a fluence of 1 × 1012 ions cm-2. The as-grown films became rough and porous on ion irradiation. Surface Plasmon Resonance (SPR) technique has been identified as a highly sensitive and powerful technique for studying the optical properties of a dielectric material. Optical properties of BFO thin films, before and after irradiation were studied using SPR technique in Otto configuration. Refractive index is found to be decreasing from 2.27 to 2.14 on ion irradiation at a wavelength of 633 nm. Refractive index dispersion of BFO thin film (from 405 nm to 633 nm) before and after ion radiation was examined.

  5. Developing grey-box model to diagnose asphaltene stability in crude oils: Application of refractive index

    Directory of Open Access Journals (Sweden)

    Mahdi Zeinali Hasanvand

    2016-12-01

    Full Text Available Asphaltene precipitation can cause serious problems in petroleum industry while diagnosing the asphaltene stability conditions in crude oil system is still a challenge and has been subject of many investigations. To monitor and diagnose asphaltene stability, high performance intelligent approaches based bio-inspired science like artificial neural network which have been optimized by various optimization techniques have been carried out. The main purpose of the implemented optimization algorithms is to decide high accurate interconnected weights of proposed neural network model. The proposed intelligent approaches are examined by using extensive experimental data reported in open literature. Moreover, to highlight robustness and precision of the addressed approaches, two different regression models have been developed and results obtained from the aforementioned intelligent models and regression approaches are compared with the corresponding refractive index data measured in laboratory. Based on the results, hybrid of genetic algorithm and particle swarm optimization have high performance and average relative absolute deviation between the model outputs and the relevant experimental data was found to be less than 0.2%. Routs from this work indicate that implication of HGAPSO-ANN in monitoring refractive index can lead to more reliable estimation of addressed issue which can lead to design of more reliable phase behavior simulation and further plans of oil production.

  6. Electronic refractive index changes and measurement of saturation intensity in Cr3+-doped YAG crystal

    Science.gov (United States)

    Kesavulu, C. R.; Moncorgé, R.; Fromager, M.; Ait-Ameur, K.; Catunda, T.

    2018-04-01

    The electronic refractive index variation is associated with the difference in the polarizabilities (Δαp) of the Cr3+ ion in its ground and excited states. In order to further address the physical origin of Δαp in a Cr3+-doped YAG crystal, time-resolved Z-scan measurements were performed and analyzed at λ = 457 nm by using a chopped Ar+ ion laser. It is found a nonlinear refractive index with the real and imaginary parts n2‧ = 2.2 × 10-8 cm2/W and n2‧‧ = 2.8 × 10-10 cm2/W, respectively. The real part is associated with a polarizability difference Δαp = 2.2 × 10-25 cm3. The imaginary part indicates that excited state absorption (ESA) occurs and that Cr:YAG behaves as a saturable absorber. The transient response of the Z-scan signal decreases with the laser intensity as τ-1 = τo-1(1+I/Is), where τo is the excited state lifetime and Is the saturation intensity. By measuring this transient response at different laser intensities, it was possible to confirm the τo value which can be derived from fluorescence measurements and to determine a Is value of 8.3 kW/cm2.

  7. Measurement of velocity field in pipe with classic twisted tape using matching refractive index technique

    International Nuclear Information System (INIS)

    Song, Min Seop; Park, So Hyun; Kim, Eung Soo

    2014-01-01

    Many researchers conducted experiments and numerical simulations to measure or predict a Nusselt number or a friction factor in a pipe with a twisted tape while some other studies focused on the heat transfer performance enhancement using various twisted tape configurations. However, since the optical access to the inner space of a pipe with a twisted tape was limited, the detailed flow field data were not obtainable so far. Thus, researchers mainly relied on the numerical simulations to obtain the data of the flow field. In this study, a 3D printing technique was used to manufacture a transparent test section for optical access. And also, a noble refractive index matching technique was used to eliminate optical distortion. This two combined techniques enabled to measure the velocity profile with Particle Image Velocimetry (PIV). The measured velocity field data can be used either to understand the fundamental flow characteristics around a twisted tape or to validate turbulence models in Computational Fluid Dynamics (CFD). In this study, the flow field in the test-section was measured for various flow conditions and it was finally compared with numerically calculated data. Velocity fields in a pipe with a classic twisted tape was measured using a particle image velocimetry (PIV) system. To obtain undistorted particle images, a noble optical technique, refractive index matching, was used and it was proved that high-quality image can be obtained from this experimental equipment. The velocity data from the PIV was compared with the CFD simulations

  8. Refractive index sensor based on lateral-offset of coreless silica interferometer

    Science.gov (United States)

    Baharin, Nur Faizzah; Azmi, Asrul Izam; Abdullah, Ahmad Sharmi; Mohd Noor, Muhammad Yusof

    2018-02-01

    A compact, cost-effective and high sensitivity fiber interferometer refractive index (RI) sensor based on symmetrical offset coreless silica fiber (CSF) configuration is proposed, optimized and demonstrated. The sensor is formed by splicing a section of CSF between two CSF sections in an offset manner. Thus, two distinct optical paths are created with large index difference, the first path through the connecting CSF sections and the second path is outside the CSF through the surrounding media. RI sensing is established from direct interaction of light with surrounding media, hence high sensitivity can be achieved with a relatively compact sensor length. In the experimental work, a 1.5 mm sensor demonstrates RI sensitivity of 750 nm/RIU for RI range between 1.33 and 1.345. With the main attributes of high sensitivity and compact size, the proposed sensor can be further developed for related applications including blood diagnosis, water quality control and food industries.

  9. Nonlinear refractive index measurements and self-action effects in Roselle-Hibiscus Sabdariffa solutions

    Science.gov (United States)

    Henari, F. Z.; Al-Saie, A.

    2006-12-01

    We report the observation of self-action phenomena, such as self-focusing, self-defocusing, self-phase modulation and beam fanning in Roselle-Hibiscus Sabdariffa solutions. This material is found to be a new type of natural nonlinear media, and the nonlinear reflective index coefficient has been determined using a Z-scan technique and by measuring the critical power for the self-trapping effect. Z-scan measurements show that this material has a large negative nonlinear refractive index, n 2 = 1 × 10-4 esu. A comparison between the experimental n 2 values and the calculated thermal value for n 2 suggests that the major contribution to nonlinear response is of thermal origin.

  10. Air wedge with variable refractive index for precise laser beam steering in a small range.

    Science.gov (United States)

    Iwasińska-Kowalska, Olga

    2018-02-20

    This paper provides the results of work on a new method for metrological laser beam steering for the purpose of angular stabilization. Frequency stabilized metrological lasers are used for interference measurements of length and angle. Angular deviation of the beam may cause cosine errors when measuring displacements. This paper presents a method for metrological laser beam deflection with an air wedge of variable refractive index. The change in the index is achieved by changing the air pressure in the wedge volume. The implemented system produced a range of angular displacements of the 0.1 mrad (10 -4   rad; 100 μrad) beam with a resolution of 10 -7   rad.

  11. Blue phosphorescent OLEDs with 34.1% external quantum efficiency using a low refractive index electron transporting material

    Science.gov (United States)

    Shin, Hyun; Lee, Jeong-Hwan; Moon, Chang-Ki; Huh, Jin-Suk; Sim, Bomi; Kim, Jang-Joo

    2016-09-01

    In this study, we demonstrate a blue OLED with the EQE of 34% and power efficiency of 79.6 lm W-1 using low refractive index electron transporting layer which are the highest efficiencies ever reported in blue OLEDs. In addition, we quantitatively calculated maximum achievable outcoupling efficiencies according to change of refractive indices, which can be used to estimate the achievable outcoupling efficiency of OLEDs without fabrication. The simulation indicates that EQE over 60% can be achievable in PhOLEDs if refractive indices of consisting organic materials' are close to 1.5.

  12. High reliability solid refractive index matching materials for field installable connections in FTTH network

    Science.gov (United States)

    Saito, Kotaro; Kihara, Mitsuru; Shimizu, Tomoya; Yoneda, Keisuke; Kurashima, Toshio

    2015-06-01

    We performed environmental and accelerated aging tests to ensure the long-term reliability of solid type refractive index matching material at a splice point. Stable optical characteristics were confirmed in environmental tests based on an IEC standard. In an accelerated aging test at 140 °C, which is very much higher than the specification test temperature, the index matching material itself and spliced fibers passing through it had steady optical characteristics. Then we performed an accelerated aging test on an index matching material attached to a built-in fiber before splicing it in the worst condition, which is different from the normal use configuration. As a result, we confirmed that the repeated insertion and removal of fiber for splicing resulted in failure. We consider that the repetition of adhesion between index matching material and fibers causes the splice to degrade. With this result, we used the Arrhenius model to estimate a median lifetime of about 68 years in a high temperature environment of 60 °C. Thus solid type index matching material at a splice point is highly reliable over long periods under normal conditions of use.

  13. Nuclear collision induced lattice swelling and refractive-index modification in ion-irradiated yttrium orthoaluminate crystal

    Science.gov (United States)

    Liu, Y.; Huang, Q.; Qiao, M.; Liu, P.; Wang, X. L.

    2017-10-01

    This work reports the study of lattice damage behavior in yttrium orthoaluminate (YAlO3) crystal irradiated with medium-energy (6.0 MeV) and relatively high-energy (20.0 MeV) Si ions through complementary characterization techniques including Rutherford backscattering/channeling spectroscopy, transmission electron microscopy and X-ray diffraction. The results clearly demonstrate that under Si-ion irradiation over the energy range from a few MeV up to tens of MeV, the nuclear energy loss (elastic collisions between injected ions and target atoms) along ion trajectory would play a dominant role in lattice damage and swelling, which leads to the decrease of refractive index in the nuclear energy deposition region and the waveguide formation in YAlO3 crystal. By contrast, the electronic energy loss (ionization and electronic excitation) over the corresponding ion energy range would not produce obvious lattice damage, and therefore could not significantly modify the refractive index in YAlO3 crystal. Utilizing optical-coupling measurements and iWKB-procedure simulation, the modified refractive-index profile in ion irradiation region has been reconstructed, and the obtained corresponding relationship between the refractive-index profile and SRIM-simulated dpa profile further confirms the nuclear-energy-loss induced lattice swelling and refractive-index decrease behaviors in ion-irradiated YAlO3 crystal, consisting with the microstructure characterization results.

  14. The relationship between the retinal image quality and the refractive index of defects arising in IOL: numerical analysis

    Science.gov (United States)

    Geniusz, Malwina

    2017-09-01

    The best treatment for cataract patients, which allows to restore clear vision is implanting an artificial intraocular lens (IOL). The image quality of the lens has a significant impact on the quality of patient's vision. After a long exposure the implant to aqueous environment some defects appear in the artificial lenses. The defects generated in the IOL have different refractive indices. For example, glistening phenomenon is based on light scattering on the oval microvacuoles filled with an aqueous humor which refractive index value is about 1.34. Calcium deposits are another example of lens defects and they can be characterized by the refractive index 1.63. In the presented studies it was calculated how the difference between the refractive indices of the defect and the refractive index of the lens material affects the quality of image. The OpticStudio Professional program (from Radiant Zemax, LLC) was used for the construction of the numerical model of the eye with IOL and to calculate the characteristics of the retinal image. Retinal image quality was described in such characteristics as Point Spread Function (PSF) and the Optical Transfer Function with amplitude and phase. The results show a strong correlation between the refractive indices difference and retinal image quality.

  15. Forward modeling of inherent optical properties from flow cytometry estimates of particle size and refractive index.

    Science.gov (United States)

    Agagliate, Jacopo; Lefering, Ina; McKee, David

    2018-03-10

    A Mie-based forward modeling procedure was developed to reconstruct bulk inherent optical properties (IOPs) from particle size distributions (PSDs) and real refractive index distributions (PRIDs) obtained using a previously developed flow cytometric (FC) method [Appl. Opt.57, 1705 (2018)APOPAI0003-693510.1364/AO.57.001705]. Given the available PSDs, extrapolations for the particle fraction outside the detection limits of the method and a complex refractive index input (with real part n r directly estimated and imaginary part n i adapted from the literature separately for organic and inorganic components), the model produces volume scattering functions that are integrated to produce scattering and backscattering coefficients, and absorption efficiencies that are used to calculate absorption coefficients. The procedure was applied to PSDs and PRIDs derived from natural samples retrieved in UK coastal waters and analyzed using a CytoSense flow cytometer (CytoBuoy b.v., The Netherlands). Optical closure analysis was carried out between reconstructed IOPs and in situ IOPs measured using an ac-9 spectrophotometer and a BB9 backscattering meter (WET Labs Inc., OR) in the same waters. The procedure is shown to achieve broad agreement with particulate scattering (b p ) and backscattering (b bp ) [root mean square percentage error (RMS%E): 35.3% and 44.5%, respectively) and to a lesser degree with backscattering ratio (b˜ bp ) (RMS%E: 77%). The procedure, however, generally overestimated particulate absorption (a p ) (RMS%E: 202.3%). This degree of closure was dependent on applying recently developed scattering error corrections to both absorption and attenuation in situ measurements. Not only do these results indirectly validate the FC method as a useful tool for PSD and PRID determination in natural particle populations, they also suggest that Mie theory may be a sufficient model for bulk IOP determination, with previously reported difficulties potentially being caused by

  16. The permittivity and refractive index measurements of doped barium titanate (BT-BCN)

    Science.gov (United States)

    Meeker, Michael A.; Kundu, Souvik; Maurya, Deepam; Kang, Min-Gyu; Sosa, Alejandro; Mudiyanselage, Rathsara R. H. H.; Clavel, Michael; Gollapudi, Sreenivasulu; Hudait, Mantu K.; Priya, Shashank; Khodaparast, Giti A.

    2017-11-01

    While piezoelectric- ferroelectric materials offer great potential for nonvolatile random access memory, most commonly implemented ferroelectrics contain lead which imposes a challenge in meeting environmental regulations. One promising candidate for lead-free, ferroelectric material based memory is (1 - x) BaTiO3 - xBa(Cu1 / 3 Nb2 / 3) O3 (BT-BCN), x = 0.025 . The samples studied here were grown on a Si substrate with an HfO2 buffer layer, thereby preventing the interdiffusion of BT-BTCN into Si. This study provides further insight into the physical behavior of BT-BCN that will strengthen the foundation for developing switching devices. The sample thicknesses ranged from 1.5 to 120 nm, and piezoelectric force microscopy was employed in order to understand the local ferroelectric behaviors. Dielectric constant as a function of frequency demonstrated enhanced frequency dispersion indicating the polar nature of the composition. The relative permittivity was found to change significantly with varying bias voltage and exhibited a tunability of 82%. The difference in the peak position during up and down sweeps is due to the presence of the spontaneous polarization. Furthermore, reflectometry was performed to determine the refractive index of samples with differing thicknesses. Our results demonstrate that refractive indices are similar to that of barium titanate. This is a promising result indicating that improved ferroelectric properties are obtained without compromising the optical properties.

  17. Local Doppler Effect, Index of Refraction through the Earth Crust, PDF and the CNGS Neutrino Anomaly?

    Directory of Open Access Journals (Sweden)

    Assis A. V. D. B.

    2012-04-01

    Full Text Available In this brief paper, we show the neutrino velocity discrepancy obtained in the OPERA experiment may be due to the local Doppler effect between a local clock attached to a given detector at Gran Sasso, say C G , and the respective instantaneous clock crossing C G , say C C , being this latter at rest in the instantaneous inertial frame having got the velocity of rotation of CERN about Earth’s axis in relation to the fixed stars. With this effect, the index of refraction of the Earth crust may accomplish a refractive effect by which the neutrino velocity through the Earth crust turns out to be small in relation to the speed of light in the empty space, leading to an encrusted discrepancy that may have contamined the data obtained from the block of detectors at Gran Sasso, leading to a time interval excess that did not provide an exact match between the shift of the protons PDF (probability distribution function by TOF c and the detection data at Gran Sasso via the maximum likelihood matching.

  18. A refractive index gradient (RING) diagnostic for transient discharges or expansions of vapor or plasmas

    International Nuclear Information System (INIS)

    Cuneo, M.E.; Lockner, T.R.; Tisone, G.C.

    1991-01-01

    The Refractive Index Gradient (RING) diagnostic described in this paper uses a fast, silicon, photodiode quadrant detector with a differential amplifier to temporally detect the refraction of a CW laser by transient discharges or expansions of vapor, gas, or plasma. The method is a local, one-dimensional, time-resolved, quantitative, species-discriminating (i.e., atoms or electrons) Schlieren technique. The diagnostic is easy to field, sensitive (minimum deflection angles detectable ∼ 0.3 μrad), and fast (risetime = 11 ± 1 ns). Circuit design, performance, and diagnostic theory will be discussed. The RING diagnostic has been applied to measurements on several ion sources under development at Sandia National Laboratory for use on intense applied-B ion diodes in the light ion-beam fusion program. Sources studied include different types of flashboards, a thermal evaporation lithium ion source, and a laser-produced ion source. Measurements have been made both in labs and directly on large pulsed power accelerators. In this paper to illustrate the utility of this technique, examples of measurements on LEVIS (Laser Evaporation Ion Source), a laser-produced, active, lithium ion source are given. Measured properties include vapor/plasma production thresholds, expansion velocities, and time-resolved gradient and density spatial profiles. Comparisons of the RING results with measurement using a Faraday cup and a double-floating Langmuir probe are presented

  19. The effects of internal refractive index variation in near-infrared optical tomography: a finite element modelling approach

    International Nuclear Information System (INIS)

    Dehghani, Hamid; Brooksby, Ben; Vishwanath, Karthik; Pogue, Brian W; Paulsen, Keith D

    2003-01-01

    Near-infrared (NIR) tomography is a technique used to measure light propagation through tissue and generate images of internal optical property distributions from boundary measurements. Most popular applications have concentrated on female breast imaging, neonatal and adult head imaging, as well as muscle and small animal studies. In most instances a highly scattering medium with a homogeneous refractive index is assumed throughout the imaging domain. Using these assumptions, it is possible to simplify the model to the diffusion approximation. However, biological tissue contains regions of varying optical absorption and scatter, as well as varying refractive index. In this work, we introduce an internal boundary constraint in the finite element method approach to modelling light propagation through tissue that accounts for regions of different refractive indices. We have compared the results to data from a Monte Carlo simulation and show that for a simple two-layered slab model of varying refractive index, the phase of the measured reflectance data is significantly altered by the variation in internal refractive index, whereas the amplitude data are affected only slightly

  20. Refractive index dispersion of chalcogenide glasses for ultra-high numerical-aperture fiber for mid-infrared supercontinuum generation

    DEFF Research Database (Denmark)

    Dantanarayana, Harshana G.; Abdel-Moneim, Nabil; Tang, Zhuoqi

    2014-01-01

    We select a chalcogenide core glass, AsSe, and cladding glass, GeAsSe, for their disparate refractive indices yet sufficient thermal-compatibility for fabricating step index fiber (SIF) for mid-infrared supercontinuum generation (MIR-SCG). The refractive index dispersion of both bulk glasses...... is measured over the 0.4 μm–33 μm wavelength-range, probing the electronic and vibrational behavior of these glasses. We verify that a two-term Sellmeier model is unique and sufficient to describe the refractive index dispersion over the wavelength range for which the experimentally determined extinction...... coefficient is insignificant. A SIF composed of the glasses is fabricated and calculated to exhibit an ultra-high numerical aperture >0.97 over the entire wavelength range 0.4-33 μm suggesting that the SIF glass pair is a promising candidate for MIR-SCG. Material dispersion characteristics and the zero...

  1. Optical property of few-mode fiber with non-uniform refractive index for cylindrical vector beam generation

    Science.gov (United States)

    Li, Hongye; Wan, Hongdan; Zhang, Zuxing; Sun, Bing; Zhang, Lin

    2016-10-01

    This paper investigates optical properties of few-mode fiber with non-uniform refractive index, namely: the few mode fiber with U-shape refractive index and the two-mode and four-mode few-mode fiber with bent radius. Finite element method is used to analyze the mode distributions based on their non-uniform refractive index. Effective mode control can be achieved through these few mode fibers to achieve vector beam generation. Finally, reflection spectra of a few-mode fiber Bragg grating are calculated theoretically and then measured under different bending conditions. Experimental results are in good accordance with the theoretical ones. These few mode fibers show potential applications in generation of cylindrical vector beam both for optical lasing and sensing systems.

  2. Enhanced vibrational spectroscopy, intracellular refractive indexing for label-free biosensing and bioimaging by multiband plasmonic-antenna array.

    Science.gov (United States)

    Chen, Cheng-Kuang; Chang, Ming-Hsuan; Wu, Hsieh-Ting; Lee, Yao-Chang; Yen, Ta-Jen

    2014-10-15

    In this study, we report a multiband plasmonic-antenna array that bridges optical biosensing and intracellular bioimaging without requiring a labeling process or coupler. First, a compact plasmonic-antenna array is designed exhibiting a bandwidth of several octaves for use in both multi-band plasmonic resonance-enhanced vibrational spectroscopy and refractive index probing. Second, a single-element plasmonic antenna can be used as a multifunctional sensing pixel that enables mapping the distribution of targets in thin films and biological specimens by enhancing the signals of vibrational signatures and sensing the refractive index contrast. Finally, using the fabricated plasmonic-antenna array yielded reliable intracellular observation was demonstrated from the vibrational signatures and intracellular refractive index contrast requiring neither labeling nor a coupler. These unique features enable the plasmonic-antenna array to function in a label-free manner, facilitating bio-sensing and imaging development. Copyright © 2014 Elsevier B.V. All rights reserved.

  3. Negative Index Refraction in the Complex Ginzburg—Landau Equation in Connection with the Experimental CIMA Reaction

    Science.gov (United States)

    Yuan, Xu-Jin

    2012-09-01

    In comparison with the phenomenon of negative index refraction observed in artificial meta-materials, it is interesting to ask if this type of behavior also exists or not in reaction-diffusion systems that support nonlinear chemical waves. Previous studies indicate that the negative index refraction could occur on a interface between a medium of a normal wave and a medium that supports anti-waves. Here we investigate the phenomenon in the complex Ginzburg—Landau equation (CGLE) in a close relationship with the quantitative model for the chloriteiodide-malonic acid (CIMA) reaction. The amplitude equation CGLE is deduced from the CIMA reaction, and simulations with mapped parameters from the reaction-diffusion equation reveal that the competition between normal waves and anti-waves on the interface determines whether the negative index refraction occurs or not.

  4. Absolute Measurement of the Refractive Index of Water by a Mode-Locked Laser at 518 nm

    Directory of Open Access Journals (Sweden)

    Zhaopeng Meng

    2018-04-01

    Full Text Available In this paper, we demonstrate a method using a frequency comb, which can precisely measure the refractive index of water. We have developed a simple system, in which a Michelson interferometer is placed into a quartz-glass container with a low expansion coefficient, and for which compensation of the thermal expansion of the water container is not required. By scanning a mirror on a moving stage, a pair of cross-correlation patterns can be generated. We can obtain the length information via these cross-correlation patterns, with or without water in the container. The refractive index of water can be measured by the resulting lengths. Long-term experimental results show that our method can measure the refractive index of water with a high degree of accuracy—measurement uncertainty at 10−5 level has been achieved, compared with the values calculated by the empirical formula.

  5. Decoupling refractive index and geometric thickness from interferometric measurements of a quartz sample using a fourth-order polynomial

    International Nuclear Information System (INIS)

    Ince, R.; Hueseyinoglu, E.

    2007-01-01

    A Michelson interferometer setup was used to determine refractive index and thickness of afused-quartz sample with no knowledge of either parameter. At small angles,<10 deg. , theinterferometer equation follows a fourth-order polynomial in the sample refractive index alone,effectively decoupling the sample thickness from the equation. The incident angle of the He-Ne laserbeam versus fringe shift was fitted to the polynomial, and its coefficients obtained. These wereused to determine refractive index to within6x10-4 of the known value with an accuracy of ± 1.3%. Sample thickness was determined to an accuracy of ± 2.5%. Reproducibility of therotating table was determined to be ± 2x10-3 degrees

  6. On the feasibility of optical-CT imaging in media of different refractive index

    International Nuclear Information System (INIS)

    Rankine, Leith; Oldham, Mark

    2013-01-01

    Purpose: Achieving accurate optical-CT 3D dosimetry without the use of viscous refractive index (RI) matching fluids would greatly increase convenience. Methods: Software has been developed to simulate optical-CT 3D dosimetry for a range of scanning configurations including parallel-beam, point, and converging light sources. For each configuration the efficacy of three refractive media was investigated: air, water, a fluid closely matched to PRESAGE ® , and perfect matching (RI = 1.00, 1.33, 1.49, and 1.501 respectively). Reconstructions were performed using both filtered backprojection (FBP) and algebraic reconstruction technique (ART). The efficacy of the three configurations and the two algorithms was evaluated by calculating the usable radius (i.e., the outermost radius where data were accurate to within 2%), and gamma (Γ) analysis. This definition recognizes that for optical-CT imaging, errors are greatest near the edge of the dosimeter, where refraction can be most pronounced. Simulations were performed on three types of dose distribution: uniform, volumetric modulated arc therapy (VMAT), and brachytherapy (Cs-137). Results: For a uniformly irradiated dosimeter the usable radius achieved with filtered backprojection was 68% for water-matching and 31% for dry-scanning in air. Algebraic reconstruction gave usable radii of 99% for both water and air (dry-scanning), indicating greater recovery of useful data for the uniform distribution. FBP and ART performed equally well for a VMAT dose distribution where less dose is delivered near the edge of the dosimeter. In this case, the usable radius was 86% and 53% for scanning in water and air, respectively. For brachytherapy, the usable radius was 99% and 98% for scanning in water and air, respectively using FBP, and a major decrease was seen with ART. Point source geometry provided 1%–2% larger usable radii than parallel geometry. Converging geometry recovered less usable dosimetry data (up to 10% reduced usable

  7. TAKE, development of the refractive index measurement technology for industrial needs; TAKE, taitekerroinmittaustekniikan kehittaeminen teollisuuden tarpeisiin - MPKT 12

    Energy Technology Data Exchange (ETDEWEB)

    Raety, J. [Oulu Univ. (Finland)

    1998-12-31

    Refractive index is one of the basic physical phenomena of materials. Traditional refractive index measurement has been widely used e.g. In research, in quality inspection of products and raw materials. It is also used for follow up of the different industrial processes. A measuring and research environment, by which it is possible to determine the complex refractive index of liquid samples, was developed in 1996 at the Measuring Instrument laboratory of the University of Oulu. This equipment, based on the reflectance of light measures both the refractive index and absorption factor of liquids simultaneously. While the commercial refractometers are best suitable for research of clear liquids, by the developed equipment it is possible to investigate by the side of clear fluids also dark strongly light absorbing samples. The measuring wave length can be chosen continuously inside the UV-Visual range. The knowing of the wave-length dependence of the complex refractive index gives additional information on the state of the fluid under inspection. The main objective of the task is to solve measuring problems of biotechnology, food industry and forest industry by a new type of refractometric method. This means the simultaneous measurement of refractive index and absorption, and the utilisation of this knowledge in wide spectral region. A refractometer, based on the technology, suitable for applied research of new measuring targets will be designed and constructed in the research. The above mentioned goals also require the survey of the present situation of the refractometry. This one and a half year project will be started in spring 1998. (orig.)

  8. Plasmonic Refractive Index Sensor with High Figure of Merit Based on Concentric-Rings Resonator

    Science.gov (United States)

    Zhang, Zhaojian; Yang, Junbo; He, Xin; Zhang, Jingjing; Huang, Jie; Chen, Dingbo; Han, Yunxin

    2018-01-01

    A plasmonic refractive index (RI) sensor based on metal-insulator-metal (MIM) waveguide coupled with concentric double rings resonator (CDRR) is proposed and investigated numerically. Utilizing the novel supermodes of the CDRR, the FWHM of the resonant wavelength can be modulated, and a sensitivity of 1060 nm/RIU with high figure of merit (FOM) 203.8 is realized in the near-infrared region. The unordinary modes, as well as the influence of structure parameters on the sensing performance, are also discussed. Such plasmonic sensor with simple framework and high optical resolution could be applied to on-chip sensing systems and integrated optical circuits. Besides, the special cases of bio-sensing and triple rings are also discussed. PMID:29300331

  9. Design and use of guided mode resonance filters for refractive index sensing

    DEFF Research Database (Denmark)

    Hermannsson, Pétur Gordon

    . The structures investigated in this thesis were fabricated in a process based on nanoreplication, in which the surface of a polymer was patterned with a structured master, cured with ultra-violet light and coated with a high refractive index material. The masters were defined using electron beam lithography......, a lift-off process, and reactive ion etching. After an introduction to the history and principles of GMRFs, the thesis describes the state-of-the-art of relevant research in the field, covers the necessary theoretical background required to understand their operation, and discusses the fabrication...... and characterization methods used. The thesis furthermore includes three journal articles. The first concerns an iterative computational model for the analytical prediction of the wavelengths at which resonances will occur, which is beneficial for e.g. device sensitivity optimization. The second paper discusses an all-polymer...

  10. Investigation of a macrobending micro-plastic optical fiber for refractive index sensing.

    Science.gov (United States)

    Jing, Ning; Zheng, Jie; Zhao, Xiaowei; Teng, Chuanxin

    2014-12-01

    This paper investigates a refractive index (RI) sensor based on a macrobending micro-plastic optical fiber (m-POF), which is used as a sensitive probe. The m-POFs are fabricated from commercial POFs using a heating and pulling method. The m-POFs have diameters of approximately 20-40 μm and act as multimode fibers at visible wavelengths. The macrobending structure of the m-POFs is simulated and optimized using the ray tracing method. The RI sensitivity and the range of RI measurements are affected by the structure parameter R/ρ, which is the ratio of the radius of curvature of the macrobending fiber to the radius of the fiber itself. A linear RI sensing response is obtained when R/ρ=20 and the sensitivity reaches 500%/RIU. The experimental results coincide well with the simulation results.

  11. Temperature dependence of a refractive index sensor based on a macrobending micro-plastic optical fiber.

    Science.gov (United States)

    Jing, Ning; Teng, Chuanxin; Zhao, Xiaowei; Zheng, Jie

    2015-03-10

    We investigate the temperature dependence of a refractive index (RI) sensor based on a macrobending micro-plastic optical fiber (m-POF) both theoretically and experimentally. The performance of the RI sensor at different temperatures (10°C-70°C) is measured and simulated over an RI range from 1.33 to 1.45. It is found that the temperature dependent bending loss and RI measurement deviation monotonically change with temperature, and the RI deviation has a higher gradient with temperature variation for a higher measured RI. Because of the linear trend of temperature dependence of the sensor, it is feasible to correct for changes in ambient temperature.

  12. Highly sensitive detection of naphthalene in solvent vapor using a functionalized PBG refractive index sensor.

    Science.gov (United States)

    Girschikofsky, Maiko; Rosenberger, Manuel; Belle, Stefan; Brutschy, Malte; Waldvogel, Siegfried R; Hellmann, Ralf

    2012-01-01

    We report an optical refractive index sensor system based on a planar Bragg grating which is functionalized by substituted γ-cyclodextrin to determine low concentrations of naphthalene in solvent vapor. The sensor system exhibits a quasi-instantaneous shift of the Bragg wavelength and is therefore capable for online detection. The overall shift of the Bragg wavelength reveals a linear relationship to the analyte concentration with a gradient of 12.5 ± 1.5 pm/ppm. Due to the spectral resolution and repeatability of the interrogation system, this corresponds to acquisition steps of 80 ppb. Taking into account the experimentally detected signal noise a minimum detection limit of 0.48 ± 0.05 ppm is deduced.

  13. Highly Sensitive Detection of Naphthalene in Solvent Vapor Using a Functionalized PBG Refractive Index Sensor

    Directory of Open Access Journals (Sweden)

    Ralf Hellmann

    2012-02-01

    Full Text Available We report an optical refractive index sensor system based on a planar Bragg grating which is functionalized by substituted γ-cyclodextrin to determine low concentrations of naphthalene in solvent vapor. The sensor system exhibits a quasi-instantaneous shift of the Bragg wavelength and is therefore capable for online detection. The overall shift of the Bragg wavelength reveals a linear relationship to the analyte concentration with a gradient of 12.5 ± 1.5 pm/ppm. Due to the spectral resolution and repeatability of the interrogation system, this corresponds to acquisition steps of 80 ppb. Taking into account the experimentally detected signal noise a minimum detection limit of 0.48 ± 0.05 ppm is deduced.

  14. Detecting small lung tumors in mouse models by refractive-index microradiology

    Energy Technology Data Exchange (ETDEWEB)

    Chien, Chia-Chi; Hwu, Y. [Academia Sinica, Institute of Physics, Taipei (China); National Tsing Hua University, Department of Engineering and System Science, Hsinchu (China); Zhang, Guilin; Yue, Weisheng; Li, Yan; Xue, Hongjie [Chinese Academy of Sciences, Shanghai Institute of Applied Physics, Shanghai (China); Liu, Ping; Sun, Jianqi; Xu, Lisa X. [Shanghai Jiao Tong University, Shanghai (China); Wang, Chang Hai; Chen, Nanyow; Lu, Chien Hung; Lee, Ting-Kuo [Academia Sinica, Institute of Physics, Taipei (China); Yang, Yuh-Cheng; Lu, Yen-Ta [Mackay Memorial Hospital, Taipei City (China); Ching, Yu-Tai [National Chiao Tung University, Department of Computer Science, Hsinchu (China); Shih, T.F.; Yang, P.C. [National Taiwan University, College of Medicine, Taipei (China); Je, J.H. [Pohang University of Science and Technology Pohang, X-ray Imaging Center, Pohang CT, Kyungbuk (Korea, Republic of); Margaritondo, G. [Ecole Polytechnique Federale de Lausanne (EPFL), Lausanne (Switzerland)

    2011-08-15

    Refractive-index (phase-contrast) radiology was able to detect lung tumors less than 1 mm in live mice. Significant micromorphology differences were observed in the microradiographs between normal, inflamed, and lung cancer tissues. This was made possible by the high phase contrast and by the fast image taking that reduces the motion blur. The detection of cancer and inflammation areas by phase contrast microradiology and microtomography was validated by bioluminescence and histopathological analysis. The smallest tumor detected is less than 1 mm{sup 3} with accuracy better than 1 x 10{sup -3} mm{sup 3}. This level of performance is currently suitable for animal studies, while further developments are required for clinical application. (orig.)

  15. Refractive index sensing based on higher-order mode reflection of a microfiber Bragg grating.

    Science.gov (United States)

    Zhang, Yu; Lin, Bo; Tjin, Swee Chuan; Zhang, Han; Wang, Guanghui; Shum, Ping; Zhang, Xinliang

    2010-12-06

    A fiber Bragg grating written in a photosensitive microfiber using KrF excimer laser via a uniform phase mask is demonstrated. We have successfully fabricated two Bragg gratings in microfibers having different diameters. In the reflection spectrum of a microfiber Bragg grating (MFBG), we observed two reflection peaks,which agrees with our numerical simulation results. Compared with the fundamental mode reflection, the higher-order reflection mode is more sensitive to the refractive index (RI) variation of the surrounding fluid due to its larger evanescent field. The measured maximum sensitivity is ~102 nm/RIU (RI unit) at an RI value of 1.378 in an MFBG with a diameter of 6 μm.

  16. Optimization of VCSELs incorporating monolithic subwavelength high-refractive-index contrast surface grating mirrors

    Science.gov (United States)

    Gebski, Marcin; Marciniak, Magdalena; Dems, Maciej; Czyszanowski, Tomasz; Lott, James A.

    2017-02-01

    We present results of computer simulations of vertical cavity surface emitting lasers (VCSELs) using novel, highreflectivity monolithic high refractive-index contrast grating (MHCG) mirrors and their more advanced version, partially covered by a thin metal layer - metallic MHCG (mMHCG) mirrors. The first experimental realization of this new class of mirrors is presented and discussed. We show that the metal layer does not deteriorate the high reflectivity of an mMHCG mirror, but in contrary, is a crucial element which allows high reflectivity and additionally opens a way for a more efficient electrical pumping of a VCSEL. Comparison of results of thermal-electrical-carrier-gain self-consistent simulations of both MHCG- and mMHCG-based VCSELs is presented and discussed. It is shown that using mHCG mirror as a top mirror of a VCSEL improves electrical characteristics and greatly decreases the differential resistance of the device.

  17. 3D field-shaping lens using all-dielectric gradient refractive index materials.

    Science.gov (United States)

    Ding, Tongyu; Yi, Jianjia; Li, Haoyu; Zhang, Hailin; Burokur, Shah Nawaz

    2017-04-10

    A novel three-dimensional (3D) optical lens structure for electromagnetic field shaping based on spatial light transformation method is proposed at microwave frequencies. The lens is capable of transforming cylindrical wavefronts into planar ones, and generating a directive emission. Such manipulation is simulated and analysed by solving Laplace's equation, and the deformation of the medium during the transformation is theoretically described in detail. The two-dimensional (2D) design method producing quasi-isotropic parameters is further extended to a potential 3D realization with all-dielectric gradient refractive index metamaterials. Numerical full-wave simulations are performed on both 2D and 3D models to verify the functionality and broadband characteristics of the calculated lens. Far-field radiation patterns and near-field distributions demonstrate a highly radiated directive beam when the lens is applied to a conical horn antenna.

  18. Investigation of light scattering characteristics of individual leukocytes using three-dimensional refractive index maps

    Science.gov (United States)

    Sung, Kung-Bin; Lin, Yang-Hsien; Lin, Fong-jheng; Hsieh, Chao-Mao; Wu, Shang-Ju

    2017-04-01

    Three-dimensional (3D) refractive-index (RI) microscopy is an emerging technique suitable for live-cell imaging due to its label-free and fast 3D imaging capabilities. We have developed a common-path system to acquire 3D RI microscopic images of cells with excellent speed and stability. After obtaining 3D RI distributions of individual leukocytes, we used a 3D finite-difference time-domain tool to study light scattering properties. Backscattering spectra of lymphocytes, monocytes and neutrophils are different from each other. Backscattering spectra of lymphocytes matched well with those of homogeneous spheres as predicted by Mie theory while backscattering spectra of neutrophils are significantly more intense than those of the other two types. This suggests the possibility of classifying the three types of leukocytes based on backscattering.

  19. PIV Measurement of Pulsatile Flows in 3D Curved Tubes Using Refractive Index Matching Method

    International Nuclear Information System (INIS)

    Hong, Hyeon Ji; Ji, Ho Seong; Kim, Kyung Chun

    2016-01-01

    Three-dimensional models of stenosis blood vessels were prepared using a 3D printer. The models included a straight pipe with axisymmetric stenosis and a pipe that was bent 10° from the center of stenosis. A refractive index matching method was utilized to measure accurate velocity fields inside the 3D tubes. Three different pulsatile flows were generated and controlled by changing the rotational speed frequency of the peristaltic pump. Unsteady velocity fields were measured by a time-resolved particle image velocimetry method. Periodic shedding of vortices occurred and moves depended on the maximum velocity region. The sizes and the positions of the vortices and symmetry are influenced by mean Reynolds number and tube geometry. In the case of the bent pipe, a recirculation zone observed at the post-stenosis could explain the possibility of blood clot formation and blood clot adhesion in view of hemodynamics.

  20. Refractive index sensors based on the fused tapered special multi-mode fiber

    Science.gov (United States)

    Fu, Xing-hu; Xiu, Yan-li; Liu, Qin; Xie, Hai-yang; Yang, Chuan-qing; Zhang, Shun-yang; Fu, Guang-wei; Bi, Wei-hong

    2016-01-01

    In this paper, a novel refractive index (RI) sensor is proposed based on the fused tapered special multi-mode fiber (SMMF). Firstly, a section of SMMF is spliced between two single-mode fibers (SMFs). Then, the SMMF is processed by a fused tapering machine, and a tapered fiber structure is fabricated. Finally, a fused tapered SMMF sensor is obtained for measuring external RI. The RI sensing mechanism of tapered SMMF sensor is analyzed in detail. For different fused tapering lengths, the experimental results show that the RI sensitivity can be up to 444.517 81 nm/RIU in the RI range of 1.334 9—1.347 0. The RI sensitivity is increased with the increase of fused tapering length. Moreover, it has many advantages, including high sensitivity, compact structure, fast response and wide application range. So it can be used to measure the solution concentration in the fields of biochemistry, health care and food processing.

  1. In-line photonic microcells based on the elliptical microfibers for refractive index sensors applications

    Science.gov (United States)

    Jin, Wa; Liu, Xuejing; Jin, Wei

    2017-10-01

    We report the fabrication of in-line photonic microcells (PMCs) by encapsulating tapered elliptical microfibers (MFs) inside glass tubes. The encapsulation does not change the optical property of the MF but protects the elliptical MF from external disturbance and contamination and makes the micro-laboratory robust. Such micro-laboratory can be easily integrated into standard fiber-optic circuits with low loss, making the elliptical MF-based devices more practical for real-world applications. Evanescent field sensing is realized by fabricating micro-channel on the PMC for ingress/egress of sample liquids/gas. Based on the encapsulated elliptical MF PMCs, we demonstrated RI sensitivity of 2024 nm per refractive index unit (nm/RIU) in gaseous environment and 21231 nm/RIU in water.

  2. TiO2 nanoparticles for enhancing the refractive index of hydrogels for ophthalmological applications

    Science.gov (United States)

    Hampp, Norbert; Dams, Christian; Badur, Thorben; Reinhardt, Hendrik

    2017-02-01

    Intraocular lenses (IOL) are currently the only treatment for cataract dependent vision impairment and blindness [1]. A polymer suitable for IOL manufacture needs to meet a plurality of properties, biocompatibility, excellent transmission in the visible range, a high flexibility for micro invasive surgery, a high refractive index as well as a good ABBE-number, just to mention the most important ones [2]. We present the use of in situ generated TiO2-nanoparticles to enhance the refractive index of poly-HEMA hydrogels - with are suitable polymers for IOL manufacture[3] - from 1.44 to 1.527 at 589.3 nm combined with an excellent ABBE-number of 54. The nanoparticles were prepared using titaniumdiisopropoxide- bis(acetylacetonate) as a precursor. First the titanium salt was diffused into the poly-HEMA matrix and then it was transformed into TiO2 in boiling water. The resulting pHEMA [TiO2] hydrogel was dried for 10 days under ambient conditions. By lathing these polymers were machined into lens precursors, the so-called Saturn-rings. After reswelling in physiological saline solutions flexible polymer lenses with high surface quality, shape memory and superior optical properties were obtained. The crystal structure of the formed TiO2 nanoparticles was identified as anatase via Xray. No release of titanium ions or TiO2 nanoparticles was observe under physiological conditions. Such hybrid materials of TiO2 nanoparticles and poly-HEMA like hydrogels are promising materials for IOL.

  3. Phase-conjugate interferometer to estimate refractive index and thickness of transparent plane parallel plates

    Energy Technology Data Exchange (ETDEWEB)

    Pastrana-Sanchez, R.; Rodriguez-Zurita, G.; Vazquez-Castillo, J. F. [Benemerita Universidad Autonoma de Puebla, Puebla (Mexico)

    2001-04-01

    A technique to estimate the refractive index and thickness of homogeneous plane parallel dielectric plates is proposed using a phase-conjugate interferometer, in which counting of interference fringes is employed. The light beam impinges a tilted plate before it enters a phase-conjugate interferometer, and a count of the fringes passing through a given reference at the observing plane gives the phase changes as a function of tilting angle. The obtained data is fitted to a mathematical model, which leads to the determination of both refractive index and thickness simultaneously. In this letter, experimental data from two interferometers are also discussed for comparison. One with an externally-pumped phase-conjugate mirror achieved with a BSO photorefractive crystal and another one with conventional mirrors. Results show that the phase sensitivity of the phase-conjugate interferometer is not simply twice the corresponding sensitivity of the conventional version. [Spanish] Se propone una tecnica para medir indices de refraccion y espesores de placas dielectricas plano paralelas homogeneas empleando un interferometro con fase conjugada, en el cual se usa el conteo de franjas. El haz luminoso incide en una placa inclinada bajo inspeccion antes de entrar en un interferometro equipado con un espejo conjugador de fase, y se realiza un conteo de las franjas que pasan por determinada referencia en el plano de observacion, proporcionando los cambios de fase en funcion del angulo de inclinacion. Los datos obtenidos se ajustan a un modelo, el cual conduce a la determinacion, tanto del indice de refraccion como del espesor, simultaneamente. En este trabajo se discuten datos experimentales provenientes de dos interferometros para su comparacion. Uno de ellos tiene un espejo conjugador basado en un cristal BSO fotorrefractivo, mientras que el otro es una variante con espejos convencionales. Se muestra que la sensibilidad de fase del interferometro con conjugador de fase no

  4. Refractive index modulation of Sb70Te30 phase-change thin films by multiple femtosecond laser pulses

    International Nuclear Information System (INIS)

    Lei, Kai; Wang, Yang; Jiang, Minghui; Wu, Yiqun

    2016-01-01

    In this study, the controllable effective refractive index modulation of Sb 70 Te 30 phase-change thin films between amorphous and crystalline states was achieved experimentally by multiple femtosecond laser pulses. The modulation mechanism was analyzed comprehensively by a spectral ellipsometer measurement, surface morphology observation, and two-temperature model calculations. We numerically demonstrate the application of the optically modulated refractive index of the phase-change thin films in a precisely adjustable color display. These results may provide further insights into ultrafast phase-transition mechanics and are useful in the design of programmable photonic and opto-electrical devices based on phase-change memory materials.

  5. The influence of refractive index change and initial bending of cantilevers on the optical lever readout method

    DEFF Research Database (Denmark)

    Dohn, Søren; Greve, Anders; Svendsen, Winnie Edith

    2010-01-01

    It has been speculated that the initial bending of cantilevers has a major influence on the detector signal in a cantilever-based sensor using the optical lever readout method. We have investigated theoretically as well as experimentally the changes induced in the detector signal when the optical...... lever technique is used to monitor a cantilever with initial bending during changes in the refractive index of the surrounding media. We find that for changes in refractive index as small as 10−4 the detector signal is highly dependent on the initial bending of the cantilever. The findings are validated...

  6. Analytical expression of giant Goos-Hänchen shift in terms of proper and improper modes in waveguide structures with arbitrary refractive index profile.

    Science.gov (United States)

    Alishahi, Fatemeh; Mehrany, Khashayar

    2010-06-01

    We analytically relate the giant Goos-Hänchen shift, observed at the interface of a high refractive index prism and a waveguide structure with an arbitrary refractive index profile, to the spatial resonance phenomenon. The proximity effect of the high refractive index prism on modal properties of the waveguide is discussed, and the observed shift is expressed in terms of proper and improper electromagnetic modes supported by the waveguide with no prism. The transversely increasing improper modes are shown playing an increasingly important role as the high refractive index prism comes closer to the waveguide.

  7. Experimental determination of soot refractive index in the infrared; Determination experimentale de l'indice de refraction de particules de suie dans l'infrarouge

    Energy Technology Data Exchange (ETDEWEB)

    Ouf, F.X.; Vendel, J. [Institut de Radioprotection et de Surete Nucleaire (IRSN), DRU/SERAC, Lab. de Physique et Metrologie des Aerosols, 91 - Gif sur Yvette (France); Ouf, F.X.; Coppalle, A.; Weil, M.E.; Yon, J. [CORIA - Complexe de Recherche Interprofessionnel en Aerothermochimie, UMR 6614, 76 - Saint Etienne du Rouvray (France)

    2007-07-01

    The study of physical properties of soot particles produced during combustion is a complex subject but of a great interest within the framework of the study of the safety of an installation, with respect to the fire hazard. These characteristics are, in this case, particularly useful in order to predict the behav of containment barriers in situation of fire, but also in order to estimate the contribution of these particles to radiative transfers. The aim of this study is to determine the radiative properties of soot particles produced during combustion. A specific device, which establishes extinction and vertical-vertical scattering coefficients, has been developed and has allowed to determine the refractive index of soot particles in the infrared. This determination also needed the establishment of size distribution and morphological properties of soot aggregates. We present in this document the experimental device developed, and the validation of this device on latex spheres which optical properties are well known. First results of extinction coefficients will be presented and will underline the similar optical behaviour of different soot aggregates. Values of refractive index will be detailed and discussed, and a direct application of these values will be carried out in order to determine the soot volume fraction. A comparison with reference method will underline the efficiency of our method. We will conclude on the validity of the information brought by this device and on the prospects of this study. A discussion is included, on the utility of mean values of refractive index and on the determination of total emissivity of soot particles. (authors)

  8. Infrared complex refractive index of astrophysical ices exposed to cosmic rays simulated in the laboratory

    Science.gov (United States)

    Rocha, W. R. M.; Pilling, S.; de Barros, A. L. F.; Andrade, D. P. P.; Rothard, H.; Boduch, P.

    2017-01-01

    In the dense and cold regions of the interstellar medium, molecules can be adsorbed on to dust grains to form ice mantles. Once formed, these can be processed by ionizing radiation coming from the stellar or interstellar medium, leading to the formation of several new molecules in the ice. Among the different types of ionizing radiation, cosmic rays play an important role in solid-phase chemistry because of the large amount of energy deposited in the ices. The physicochemical changes induced by the energetic processing of astrophysical ices are recorded in a intrinsic parameter of the matter called the complex refractive index. In this paper, for the first time, we present a catalogue containing 39 complex refractive indices (n, k) in the infrared from 5000 to 600 cm-1 (2.0-16.6 μm) for 13 different water-containing ices processed in the laboratory by cosmic ray analogues. The calculation was performed using the NKABS - an acronym of the determination of N and K from absorbance data - code,which employs the Lambert-Beer and Kramers-Kronig equations to calculate the values of n and k. The results are also available at the following web site: http://www1.univap.br/gaa/nkabs-database/data.htm. As a test case, H2O:NH3:CO2:CH4 ice was employed in a radiative transfer simulation of a protoplanetary disc to show that these data are indispensable to reproduce the spectrum of ices containing young stellar objects.

  9. The Theory for the Dielectric Slab Waveguide with Complex Refractive Index Applied to GaAs Lasers

    DEFF Research Database (Denmark)

    Buus, Jens

    1977-01-01

    In this paper we investigate the homogeneous dielectric slab waveguide in the case of complex dielectric constants. A method for calculating the field distribution in a dielectric waveguide with an arbitrary symmetrical variation in the refractive index is developed, and some of the results...

  10. Determining the refractive index dispersion and thickness of hot-pressed chalcogenide thin films from an improved Swanepoel method

    DEFF Research Database (Denmark)

    Fang, Y. Z.; Jayasuriya, D.; Furniss, David

    2017-01-01

    The well-known method presented by Swanepoel can be used to determine the refractive index dispersion of thin films in the near-infrared region from wavelength values at maxima and minima, only, of the transmission interference fringes. In order to extend this method into the mid-infrared spectra...

  11. In situ measurement of humidity induced changes in the refractive index and thickness of polyethylene glycol thin films

    Science.gov (United States)

    Bilen, Bukem; Skarlatos, Yani; Aktas, Gulen; Inci, M. Naci; Dispinar, Tugba; Kose, M. Merve; Sanyal, Amitav

    2008-11-01

    Humidity induced changes in the refractive index and thickness of polyethylene glycol (PEG) thin films are in situ determined by optical waveguide spectroscopy. PEG brushes are covalently attached to the surface of a thin gold film on a borosilicate crown glass (BK7) using a grafting-from chemical synthesis technique. The measurements are carried out in an attenuated total internal reflection setup. At low humidity levels, both the refractive index and the thickness change gradually due to swelling of the PEG thin films upon water intake. At around 80% relative humidity, a steep decrease in the refractive index and a steep increase in the thickness are observed as a result of a phase change from a semicrystalline state to a physical gel state. The hydrogenation of PEG films causes a less pronounced phase change from a semicrystalline state to a gel state. Due to fewer ether oxygen atoms available for the water molecules to make hydrogen bonding, the polymer has a more stable structure than before and the phase change is observed to shift to higher humidity levels. It is discussed that such a humidity induced change in the index of refraction can be utilized in constructing of a PEG based humidity sensor.

  12. Study on Effect of Number of Transparent Covers and Refractive Index on Performance of Solar Water Heater

    Directory of Open Access Journals (Sweden)

    B. Kalidasan

    2014-01-01

    Full Text Available Liquid flat plate collector (solar flat plate collector is one of the important applications in solar thermal system. The development in solar photovoltaic is an emerging challenge for the solar thermal system. In the current work an attempt has been made to optimize the number of transparent covers and refractive index to improve the optical efficiency and thermal efficiency for the collector. Performance of the liquid flat plate collector at VIT University Vellore has been simulated numerically for January 21st at an interval of half an hour with different numbers of transparent covers (0–3 and different refractive index values ranging from 1.1 to 1.7. The formulation and solutions are developed with simple software Microsoft Office Excel to result the performance characteristics. The result shows that the efficiency of the flat plate collector increases with an increase in number of covers and decreases after an optimum number of covers. It also decreases with an increase in refractive index. The combination of optimum number (two and lower refractive index (1.1 results improved useful heat.

  13. Solution of Radiative Transfer Equation with a Continuous and Stochastic Varying Refractive Index by Legendre Transform Method

    Directory of Open Access Journals (Sweden)

    M. Gantri

    2014-01-01

    Full Text Available The present paper gives a new computational framework within which radiative transfer in a varying refractive index biological tissue can be studied. In our previous works, Legendre transform was used as an innovative view to handle the angular derivative terms in the case of uniform refractive index spherical medium. In biomedical optics, our analysis can be considered as a forward problem solution in a diffuse optical tomography imaging scheme. We consider a rectangular biological tissue-like domain with spatially varying refractive index submitted to a near infrared continuous light source. Interaction of radiation with the biological material into the medium is handled by a radiative transfer model. In the studied situation, the model displays two angular redistribution terms that are treated with Legendre integral transform. The model is used to study a possible detection of abnormalities in a general biological tissue. The effect of the embedded nonhomogeneous objects on the transmitted signal is studied. Particularly, detection of targets of localized heterogeneous inclusions within the tissue is discussed. Results show that models accounting for variation of refractive index can yield useful predictions about the target and the location of abnormal inclusions within the tissue.

  14. Multi-band Microwave Antennas and Devices based on Generalized Negative-Refractive-Index Transmission Lines

    Science.gov (United States)

    Ryan, Colan Graeme Matthew

    Focused on the quad-band generalized negative-refractive-index transmission line (G-NRI-TL), this thesis presents a variety of novel printed G-NRI-TL multi-band microwave device and antenna prototypes. A dual-band coupled-line coupler, an all-pass G-NRI-TL bridged-T circuit, a dual-band metamaterial leaky-wave antenna, and a multi-band G-NRI-TL resonant antenna are all new developments resulting from this research. In addition, to continue the theme of multi-band components, negative-refractive-index transmission lines are used to create a dual-band circularly polarized transparent patch antenna and a two-element wideband decoupled meander antenna system. High coupling over two independently-specified frequency bands is the hallmark of the G-NRI-TL coupler: it is 0.35lambda0 long but achieves approximately -3 dB coupling over both bands with a maximum insertion loss of 1 dB. This represents greater design flexibility than conventional coupled-line couplers and less loss than subsequent G-NRI-TL couplers. The single-ended bridged-T G-NRI-TL offers a metamaterial unit cell with an all-pass magnitude response up to 8 GHz, while still preserving the quad-band phase response of the original circuit. It is shown how the all-pass response leads to wider bandwidths and improved matching in quad-band inverters, power dividers, and hybrid couplers. The dual-band metamaterial leaky-wave antenna presented here was the first to be reported in the literature, and it allows broadside radiation at both 2 GHz and 6 GHz without experiencing the broadside stopband common to conventional periodic antennas. Likewise, the G-NRI-TL resonant antenna is the first reported instance of such a device, achieving quad-band operation between 2.5 GHz and 5.6 GHz, with a minimum radiation efficiency of 80%. Negative-refractive-index transmission line loading is applied to two devices: an NRI-TL meander antenna achieves a measured 52% impedance bandwidth, while a square patch antenna incorporates

  15. Towards Silk Fiber Optics: Refractive Index Characterization, Fiber Spinning, and Spinneret Analysis

    Science.gov (United States)

    Spitzberg, Joshua David

    Of the many biologically derived materials, whose historical record of use by humans underscores an ex-vivo utility, silk is interesting for it's contemporary repurposing from textile to biocompatible substrate. And while even within this category silk is one of several materials studied for novel repurposing, it has the unique character of being evolutionarily developed specifically for fiber spinning in vivo. The work discussed here is inspired by taking what nature has given, to explore the in vitro spinning of silk towards biocompatible fiber optics applications. A common formulation of silk used in biomedical studies for re-forming it into the various structures begins with the silkworm cocoon, which is degummed and dissolved into an aqueous solution of its miscible protein, fibroin, and post-treated to fabricate solid structures. In the first aim, the optical refractive index (RI) of various post-treatment methods is discussed towards determining RI design techniques. The methods considered in this work for re-forming a solid fiber from the reconstituted silk fibroin (RSF) solution borrow from the industrial techniques of gel spinning, and dry-spinning. In the second aim, methods are applied to RSF and quality of the spun fibers discussed. A feature common to spinning techniques is passing the (silk) material through a spinneret of specific shape. In the third aim, fluid flow through a simplified native silkworm spinneret is modeled towards bio-inspired lessons in design. In chapter 1 the history, reconstitution, are discussed towards understanding the fabrication of several optical device examples. Chapter 2 then prefaces the experiments and measurements in fiber optics by reviewing electromagnetic theory of waveguide function, and loss factors, to be considered in actual device fabrication. Chapter 3 presents results and discussion for the first aim, understanding design principles for the refractive index of RSF. From this point, industrial fiber

  16. Semiempirical Relaxation Between Non-Linear Susceptibility (Refrective Index), Linear Refractivity Index and Optical Gap and ITS Application to Amorphous Chalcogenides

    Czech Academy of Sciences Publication Activity Database

    Tichá, H.; Tichý, Ladislav

    2002-01-01

    Roč. 4, č. 2 (2002), s. 381-386 ISSN 1454-4164 R&D Projects: GA AV ČR KSK2050602 Keywords : amorphous chalcogenides * oxide glasses * non-linear refractive index Subject RIV: CA - Inorganic Chemistry Impact factor: 0.446, year: 2002

  17. Experimental and numerical study on refractive index sensors based on fibre Bragg gratings inscribed in multimode fibre

    Science.gov (United States)

    Filipe Kuhne, Jean; Rocha, Ana Maria; de Oliveira, Valmir; José Kalinowski, Hypolito; Canute Kamikawachi, Ricardo

    2018-02-01

    In this work is reported the experimental and numerical results of the refractive index response of etched fibre Bragg gratings written in a graded index multimode fibre. The responses of the modes coupled by the grating inscribed in a multimode fibre are compared with the mode coupled by a grating inscribed in single mode fibre. The results of this study show that the refractive index sensitivity and the dynamical range of etched fibre Bragg gratings written in multimode fibres are higher than the ones verified in single-mode fibres. The determination of oil-biodiesel blend concentrations are also compared as an example of practical applications. It is shown that a greater core diameter of the multimode fibre enables the Bragg gratings to exhibit enhanced sensitivity without requiring further fibre diameter reduction.

  18. Optical waveguide modeling of refractive index mediated pH responses in silica nanocomposite thin film based fiber optic sensors

    Science.gov (United States)

    Ohodnicki, P. R.; Wang, C.

    2016-02-01

    Recent experiments have demonstrated a pH-dependent optical transmission of silica based nanocomposite thin film enabled evanescent wave absorption spectroscopy based fiber optic sensors in aqueous solutions. Although the response was observed to linearly correlate with the pH-dependent surface charge density of the silica matrix, the responsible mechanism was not fully clarified. In this manuscript, an optical waveguide model is applied to describe observed responses through a modified effective refractive index of the silica matrix layer as a function of the solution phase pH. The refractive index dependence results from a surface charge dependent ionic adsorption, resulting in concentration of ionic species at charged surfaces. The resultant effective index modification to porous silica is estimated through effective medium theories and applied to an optical waveguide model of a multi-mode fiber optic based sensor response capable of reproducing all experimental observations reported to date.

  19. Bulk photons in asymmetrically warped spacetimes and non-trivial vacuum refractive index

    Science.gov (United States)

    Farakos, K.; Mavromatos, N. E.; Pasipoularides, P.

    2009-01-01

    We consider asymmetrically warped brane models, or equivalently brane models where the background metric is characterized by different time and space warp factors. The main feature of these models is that 4D Lorentz symmetry is violated for fields which propagate in the bulk, such as gravitons. In this paper we examine the case of bulk photons in asymmetrically warped brane models. Although our results are general, we examine here two specific but characteristic solutions: 1) AdS-Schwarzschild 5D Black Hole solution and 2) AdS-Reissner Nordstrom 5D Black Hole solution. We show that the standard Lorentz invariant dispersion relation for 4D photons is corrected by nonlinear terms which lead to an Energy-dependent speed of light. Specifically, we obtain a sub-luminous Energy-dependent refractive index of the form neff(ømega) = 1+cG ømega2, where ømega is the energy of the photon, and the factor cG is always positive and depends on the free parameters of the model. Finally, comparing the results with recent data from the MAGIC Telescope, claiming a delayed arrival of photons from the Active Galactic Nucleus of Mk501, we impose concrete restrictions to the two sets of models examined in this work. We shall also discuss briefly other possible astrophysical constraints on our models.

  20. A Near-Zero Refractive Index Meta-Surface Structure for Antenna Performance Improvement

    Science.gov (United States)

    Ullah, Mohammad Habib; Islam, Mohammad Tariqul; Faruque, Mohammad Rashed Iqbal

    2013-01-01

    A new meta-surface structure (MSS) with a near-zero refractive index (NZRI) is proposed to enhance the performance of a square loop antenna array. The main challenge to improve the antenna performance is increment of the overall antenna volume that is mitigated by assimilating the planar NZRI MSS at the back of the antenna structure. The proposed NZRI MSS-loaded CPW-fed (Co-Planar Waveguide) four-element array antenna is designed on ceramic-bioplastic-ceramic sandwich substrate using high-frequency structure simulator (HFSS), a finite-element-method-based simulation tool. The gain and directivity of the antenna are significantly enhanced by incorporating the NZRI MSS with a 7 × 6 set of elements at the back of the antenna structure. Measurement results show that the maximum gains of the antenna increased from 6.21 dBi to 8.25 dBi, from 6.52 dBi to 9.05 dBi and from 10.54 dBi to 12.15 dBi in the first, second and third bands, respectively. The effect of the slot configuration in the ground plane on the reflection coefficient of the antenna was analyzed and optimized. The overall performance makes the proposed antenna appropriate for UHFFM (Ultra High Frequency Frequency Modulation) telemetry-based space applications as well as mobile satellite, microwave radiometry and radio astronomy applications. PMID:28788376

  1. Optical fiber sensor based on capillary wall for highly-sensitive refractive index measurement

    Science.gov (United States)

    Liu, Yun; Peng, Wei; Zhang, Xinpu; Qian, Siyu

    2014-05-01

    This paper reports a temperature-compensated fiber-optic refractive index (RI) sensor for high sensitivity measurement. The sensor includes a piece of fused-silica capillary (FSC) and a fiber Bragg grating (FBG), both of which are sandwiched by single-mode fibers (SMFs). When light from the lead-in SMF enters into the wall of the FSC that acts as a RI sensing element, multiple modes are excited and interfere to form fringes collected by the lead-out SMF. The FBG is fabricated adjunct to the FSC to compensate its temperature sensitivity. The FSC based sensor prototype is fabricated and sealed in a flow cell to test its performance. Experimental results show that the sensor is highly sensitive to RI, and the sensitivity in the tested RI range from 1.33 to 1.35 is 698.52 nm/RIU and from 1.35 to 1.37 is 1061.78 nm/RIU. The temperature sensitivity of the FSC is -0.173 nm/°C, which is compensated by the FBG. This capillary wall based sensor can be further developed as a miniaturized fiber optic biosensor for biochemical application.

  2. Relation between Raman backscattering from droplets and bulk water: Effect of refractive index dispersion

    Science.gov (United States)

    Plakhotnik, Taras; Reichardt, Jens

    2018-03-01

    A theoretical framework is presented that permits investigations of the relation between inelastic backscattering from microparticles and bulk samples of Raman-active materials. It is based on the Lorentz reciprocity theorem and no fundamental restrictions concerning the microparticle shape apply. The approach provides a simple and intuitive explanation for the enhancement of the differential backscattering cross-section in particles in comparison to bulk. The enhancement factor for scattering of water droplets in the diameter range from 0 to 60 μm (vitally important for the a priori measurement of liquid water content of warm clouds with spectroscopic Raman lidars) is about a factor of 1.2-1.6 larger (depending on the size of the sphere) than an earlier study has shown. The numerical calculations are extended to 1000 μm and demonstrate that dispersion of the refractive index of water becomes an important factor for spheres larger than 100 μm. The physics of the oscillatory phenomena predicted by the simulations is explained.

  3. Ultra-weak FBG and its refractive index distribution in the drawing optical fiber.

    Science.gov (United States)

    Guo, Huiyong; Liu, Fang; Yuan, Yinquan; Yu, Haihu; Yang, Minghong

    2015-02-23

    For the online writing of ultra-weak fiber Bragg gratings (FBGs) in the drawing optical fibers, the effects of the intensity profile, pulse fluctuation and pulse width of the excimer laser, as well as the transverse and longitudinal vibrations of the optical fiber have been investigated. Firstly, using Lorentz-Loren equation, Gladstone-Dale mixing rule and continuity equation, we have derived the refractive index (RI) fluctuation along the optical fiber and the RI distribution in the FBG, they are linear with the gradient of longitudinal vibration velocity. Then, we have prepared huge amounts of ultra-weak FBGs in the non-moving optical fiber and obtained their reflection spectra, the measured reflection spectra shows that the intensity profile and pulse fluctuation of the excimer laser, as well as the transverse vibration of the optical fiber are little responsible for the inconsistency of ultra-weak FBGs. Finally, the effect of the longitudinal vibration of the optical fiber on the inconsistency of ultra-weak FBGs has been discussed, and the vibration equations of the drawing optical fiber are given in the appendix.

  4. An iterative correction approach used to retrieve the refractive index of squid pigment aerosols

    Science.gov (United States)

    Dinneen, Sean R.; Deravi, Leila F.; Greenslade, Margaret E.

    2018-03-01

    Pigments localized within cephalopod chromatophores are important for dermal coloration. When isolated and used as materials outside of the animal, the pigments can be processed as aerosols, illustrating a potential application for spray-on-coatings. The optical features of the pigment aerosols are difficult to analyze and require a method to correct for the particle charging and solvent effects accumulated during the aerosolizing process. We describe a method to account for these effects using an innovative iterative approach tied to retrieved refractive index (RI) values. RI retrievals were obtained via the best fit between the corrected, experimentally observed extinction efficiencies compared to those calculated by Mie theory for a specific RI at selected sizes. In addition to these retrievals, the impact of solvent on the particles’ optical properties was also examined via the Maxwell-Garnett mixing rule. Ultimately, we obtained a pigment RI with a real portion (n) of 1.66 (±0.05) representing a lower limit and an imaginary portion (k) of 0.13 (±0.08)i representing an upper limit for the generated aerosols. Combined, this approach advances techniques used to retrieve RI values that benefits both atmospheric chemistry and bio-inspired materials.

  5. Flow over interacting barchan dunes studied in a refractive-index-matched environment

    Science.gov (United States)

    Tang, Z.; Jiang, N.; Blois, G.; Barros, J. M.; Best, J. L.; Christensen, K. T.

    2013-11-01

    Barchan dunes are three-dimensional topographic features characterized by a crescentic shape. Very common on Earth's surface, barchans are produced by unidirectional flows in regions of sediment starvation and are characterized by migration rates that are a function of their volume. This results in complex dune-to-dune interaction mechanisms that are poorly understood. In order to quantify the flow structure produced by interacting barchans, PIV measurements were made wherein the dune models were immersed in a flowing fluid that was refractive-index-matched to the dune material. Doing so provided full optical access to the obstructed regions of flow and eliminated reflections from the liquid-solid boundaries, allowing near-wall data to be collected. Clear barchan models with different volumetric ratios were arranged in tandem, and flow-field measurements were made in multiple streamwise-wall-normal and streamwise-spanwise planes. Ensemble-averaged flow fields and Reynolds stresses were obtained for different barchan spacings and compared to the reference case of an isolated barchan. Proper orthogonal decomposition analysis was employed to study the spatial characteristics of the energy distribution both between and downstream of the aligned dunes.

  6. An acoustic thermometer for air refractive index estimation in long distance interferometric measurements

    Science.gov (United States)

    Pisani, Marco; Astrua, Milena; Zucco, Massimo

    2018-02-01

    We present a method to measure the temperature along the path of an optical interferometer based on the propagation of acoustic waves. It exploits the high sensitivity of the speed of sound to air temperature. In particular, it takes advantage of a technique where the generation of acoustic waves is synchronous with the amplitude modulation of a laser source. A photodetector converts the laser light into an electronic signal used as a reference, while the incoming acoustic waves are focused on a microphone and generate the measuring signal. Under this condition, the phase difference between the two signals substantially depends on the temperature of the air volume interposed between the sources and the receivers. A comparison with traditional temperature sensors highlighted the limit of the latter in the case of fast temperature variations and the advantage of a measurement integrated along the optical path instead of a sampling measurement. The capability of the acoustic method to compensate for the interferometric distance measurements due to air temperature variations has been demonstrated to the level of 0.1 °C corresponding to 10‑7 on the refractive index of air. We applied the method indoor for distances up to 27 m, outdoor at 78 m and finally tested the acoustic thermometer over a distance of 182 m.

  7. Estimated Uncertainties in the Idaho National Laboratory Matched-Index-of-Refraction Lower Plenum Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Donald M. McEligot; Hugh M. McIlroy, Jr.; Ryan C. Johnson

    2007-11-01

    The purpose of the fluid dynamics experiments in the MIR (Matched-Index-of-Refraction) flow system at Idaho National Laboratory (INL) is to develop benchmark databases for the assessment of Computational Fluid Dynamics (CFD) solutions of the momentum equations, scalar mixing, and turbulence models for typical Very High Temperature Reactor (VHTR) plenum geometries in the limiting case of negligible buoyancy and constant fluid properties. The experiments use optical techniques, primarily particle image velocimetry (PIV) in the INL MIR flow system. The benefit of the MIR technique is that it permits optical measurements to determine flow characteristics in passages and around objects to be obtained without locating a disturbing transducer in the flow field and without distortion of the optical paths. The objective of the present report is to develop understanding of the magnitudes of experimental uncertainties in the results to be obtained in such experiments. Unheated MIR experiments are first steps when the geometry is complicated. One does not want to use a computational technique, which will not even handle constant properties properly. This report addresses the general background, requirements for benchmark databases, estimation of experimental uncertainties in mean velocities and turbulence quantities, the MIR experiment, PIV uncertainties, positioning uncertainties, and other contributing measurement uncertainties.

  8. Square array photonic crystal fiber-based surface plasmon resonance refractive index sensor

    Science.gov (United States)

    Liu, Min; Yang, Xu; Zhao, Bingyue; Hou, Jingyun; Shum, Ping

    2017-12-01

    Based on surface plasmon resonance (SPR), a novel refractive index (RI) sensor comprising a square photonic crystal fiber (PCF) is proposed to realize the detection of the annular analyte. Instead of hexagon structure, four large air-holes in a square array are introduced to enhance the sensitivity by allowing two polarization directions of the core mode to be more sensitive. The gold is used as the only plasmonic material. The design purpose is to reduce the difficulty in gold deposition and enhance the RI sensitivity. The guiding properties and the effects of the parameters on the performance of the sensor are numerically investigated by the Finite Element Method (FEM). By optimizing the structure, the sensor can exhibit remarkable sensitivity up to 7250 nm/RIU and resolution of 1.0638 × 10‑5 RIU with only one plasmonic material, which is very competitive compared with the other reported externally coated and single-layer coated PCF-based SPR (PCF-SPR) sensors, to our best knowledge.

  9. Stationary planetary wave propagation in Northern Hemisphere winter – climatological analysis of the refractive index

    Directory of Open Access Journals (Sweden)

    Q. Li

    2007-01-01

    Full Text Available The probability density on a height-meridional plane of negative refractive index squared f(nk2<0 is introduced as a new analysis tool to investigate the climatology of the propagation conditions of stationary planetary waves based on NCEP/NCAR reanalysis data for 44 Northern Hemisphere boreal winters (1958–2002. This analysis addresses the control of the atmospheric state on planetary wave propagation. It is found that not only the variability of atmospheric stability with altitudes, but also the variability with latitudes has significant influence on planetary wave propagation. Eliassen-Palm flux and divergence are also analyzed to investigate the eddy activities and forcing on zonal mean flow. Only the ultra-long planetary waves with zonal wave number 1, 2 and 3 are investigated. In Northern Hemisphere winter the atmosphere shows a large possibility for stationary planetary waves to propagate from the troposphere to the stratosphere. On the other hand, waves induce eddy momentum flux in the subtropical troposphere and eddy heat flux in the subpolar stratosphere. Waves also exert eddy momentum forcing on the mean flow in the troposphere and stratosphere at middle and high latitudes. A similar analysis is also performed for stratospheric strong and weak polar vortex regimes, respectively. Anomalies of stratospheric circulation affect planetary wave propagation and waves also play an important role in constructing and maintaining of interannual variations of stratospheric circulation.

  10. Graphene-deposited photonic crystal fibers for continuous refractive index sensing applications.

    Science.gov (United States)

    Tan, Y C; Tou, Z Q; Chow, K K; Chan, C C

    2015-11-30

    We present a pilot demonstration of an optical fiber based refractive index (RI) sensor involving the deposition of graphene onto the surface of a segment of a photonic crystal fiber (PCF) in a fiber-based Mach-Zehnder Interferometer (MZI). The fabrication process is relatively simple and only involves the fusion splicing of a PCF between two single mode fibers. The deposition process relies only on the cold transfer of graphene onto the PCF segment, without the need for further physical or chemical treatment. The graphene overlay modified the sensing scheme of the MZI RI sensor, allowing the sensor to overcome limitations to its detectable RI range due to free spectral range issues. This modification also allows for continuous measurements to be obtained without the need for reference values for the range of RIs studied and brings to light the potential for simultaneous dual parameter sensing. The sensor was able to achieve a RI sensitivity of 9.4 dB/RIU for the RIs of 1.33-1.38 and a sensitivity of 17.5 dB/RIU for the RIs of 1.38-1.43. It also displayed good repeatability and the results obtained were consistent with the modeling.

  11. Refractive index measurements of multiple layers using numerical refocusing in FF-OCT.

    Science.gov (United States)

    Min, Gihyeon; Choi, Woo June; Kim, Ju Wan; Lee, Byeong Ha

    2013-12-02

    We propose and demonstrate the novel method of refractive index (RI) measurement for each layer of multilayered samples, which is based on numerical refocusing in full field optical coherence tomography (FF-OCT). The en-face FF-OCT image on an inner layer boundary of a multilayered sample is unintentionally blurred or defocused due to the RI of the sample itself, but can be numerically refocused. The refocusing is performed by numerically shifting the image sensor plane of the system, in general. However, by calculating the corresponding sample shift and then compared it with the actual sample shifting distance, we could extract the average RI of the layer between any two layer boundaries within the multilayered sample. In addition, the thickness of that particular layer could be derived at the same time. For the idea proof, several samples were prepared by stacking, for each sample, two transparent plates with a gap in between. While changing the material of the plate and filling the gap with oil, the RIs of the plate and the oil were measured. For oils of various RIs, from 1.2977 to 1.3857, the measured RIs were well matched with the reported ones within 0.205%. Moreover, even with a stack of various and multiple plates in front of the same oil layer, the oil RI and the physical thickness of the oil layer were extracted with average errors of only 0.065% and 0.990%, respectively.

  12. A Near Zero Refractive Index Metamaterial for Electromagnetic Invisibility Cloaking Operation

    Directory of Open Access Journals (Sweden)

    Sikder Sunbeam Islam

    2015-07-01

    Full Text Available The paper reveals the design of a unit cell of a metamaterial that shows more than 2 GHz wideband near zero refractive index (NZRI property in the C-band region of microwave spectra. The two arms of the unit cell were splitted in such a way that forms a near-pi-shape structure on epoxy resin fiber (FR-4 substrate material. The reflection and transmission characteristics of the unit cell were achieved by utilizing finite integration technique based simulation software. Measured results were presented, which complied well with simulated results. The unit cell was then applied to build a single layer rectangular-shaped cloak that operates in the C-band region where a metal cylinder was perfectly hidden electromagnetically by reducing the scattering width below zero. Moreover, the unit cell shows NZRI property there. The experimental result for the cloak operation was presented in terms of S-parameters as well. In addition, the same metamaterial shell was also adopted for designing an eye-shaped and triangular-shaped cloak structure to cloak the same object, and cloaking operation is achieved in the C-band, as well with slightly better cloaking performance. The novel design, NZRI property, and single layer C-band cloaking operation has made the design a promising one in the electromagnetic paradigm.

  13. Measurement of 3D refractive index distribution by optical diffraction tomography

    Science.gov (United States)

    Chi, Weining; Wang, Dayong; Wang, Yunxin; Zhao, Jie; Rong, Lu; Yuan, Yuanyuan

    2018-01-01

    Optical Diffraction Tomography (ODT), as a novel 3D imaging technique, can obtain a 3D refractive index (RI) distribution to reveal the important optical properties of transparent samples. According to the theory of ODT, an optical diffraction tomography setup is built based on the Mach-Zehnder interferometer. The propagation direction of object beam is controlled by a 2D translation stage, and 121 holograms based on different illumination angles are recorded by a Charge-coupled Device (CCD). In order to prove the validity and accuracy of the ODT, the 3D RI profile of microsphere with a known RI is firstly measured. An iterative constraint algorithm is employed to improve the imaging accuracy effectively. The 3D morphology and average RI of the microsphere are consistent with that of the actual situation, and the RI error is less than 0.0033. Then, an optical element fabricated by laser with a non-uniform RI is taken as the sample. Its 3D RI profile is obtained by the optical diffraction tomography system.

  14. Structured illumination for 3D subdiffraction reconstruction of refractive-index and fluorescence (Conference Presentation)

    Science.gov (United States)

    Chowdhury, Shwetadwip; Izatt, Joseph A.

    2017-02-01

    Refractive-index (RI) is an inherent optical property of materials that can provide important biochemical and biophysical information about a biological sample. Optical-diffraction-tomography (ODT) is a current standard to obtain quantitative three-dimensional RI distributions, by measuring optical fields diffracted from the sample by rotated illumination beams. This method for ODT also synthetically enlarges the microscope's lateral spatial-frequency support, and thus images the RI distribution with lateral resolution beyond the microscope's coherent diffraction limit. Fluorescence microscopy offers a complementary set of biological insights by offering imaging capabilities with molecular specificity. Analogous to ODT, super-resolution fluorescence techniques can offer these insights at spatial resolutions beyond the microscope's incoherent diffraction limit. Unfortunately, such super-resolution techniques are generally incompatible with ODT and a generalized sub-diffraction technique has been difficult to find, which hinders a cohesive, high-resolution, multimodal analysis of biological samples. We experimentally introduce, for the first time to our knowledge, a novel, high resolution, optical system that uses structured illumination (SI) to enable 3D sub-diffraction resolution imaging for both fluorescence and RI. We demonstrate sub-diffraction resolution, multimodal SI imaging of HT29 and MCF7 cells fluorescently stained for F-actin, such that the 3D RI and fluorescent distributions may offer unique, but complementary, insights into the biological samples.

  15. Nanofabrication of planar split ring resonators for negative refractive index metamaterials in the infrared range

    Directory of Open Access Journals (Sweden)

    ZORAN JAKSIC

    2006-06-01

    Full Text Available Experimental nanofabrication of planar structures for one-dimensional metamaterials designed to achieve a negative effective refractive index in the mid-infrared range (5–10 micrometers was performed. Double split ring and complementary double split ring resonators (SRR and CSRR with square and circular geometries, were chosen to be fabricated since these are the basic building blocks to achieve a negative effective dielectric permittivity and magnetic permeability. Scanning probe nanolithography with z-scanner movement was used to fabricate straight-line and curvilinear segments with a line width of 80 – 120 nm. The geometries were delineated in 20 nm thin silver layers sputter-deposited on a positive photoresist substrate spin-coated on polished single crystal silicon wafers, as well as on polycarbonate slabs. The morphology of the structures was characterized by atomic force microscopy. The feature repeatibility was 60 – 150 nm, depending on the process conditions and the feature complexity. The nanolithographic groove depth in different samples ranged from 4 nm to 80 nm.

  16. Characterizing Protein Complexes with UV absorption, Light Scattering, and Refractive Index Detection.

    Science.gov (United States)

    Trainoff, Steven

    2009-03-01

    Many modern pharmaceuticals and naturally occurring biomolecules consist of complexes of proteins and polyethylene glycol or carbohydrates. In the case of vaccine development, these complexes are often used to induce or amplify immune responses. For protein therapeutics they are used to modify solubility and function, or to control the rate of degradation and elimination of a drug from the body. Characterizing the stoichiometry of these complexes is an important industrial problem that presents a formidable challenge to analytical instrument designers. Traditional analytical methods, such as using florescent tagging, chemical assays, and mass spectrometry perturb the system so dramatically that the complexes are often destroyed or uncontrollably modified by the measurement. A solution to this problem consists of fractionating the samples and then measuring the fractions using sequential non-invasive detectors that are sensitive to different components of the complex. We present results using UV absorption, which is primarily sensitive to the protein fraction, Light Scattering, which measures the total weight average molar mass, and Refractive Index detection, which measures the net concentration. We also present a solution of the problem inter-detector band-broadening problem that has heretofore made this approach impractical. Presented will be instrumentation and an analysis method that overcome these obstacles and make this technique a reliable and robust way of non-invasively characterizing these industrially important compounds.

  17. A Near-Zero Refractive Index Meta-Surface Structure for Antenna Performance Improvement

    Directory of Open Access Journals (Sweden)

    Mohammad Habib Ullah

    2013-11-01

    Full Text Available A new meta-surface structure (MSS with a near-zero refractive index (NZRI is proposed to enhance the performance of a square loop antenna array. The main challenge to improve the antenna performance is increment of the overall antenna volume that is mitigated by assimilating the planar NZRI MSS at the back of the antenna structure. The proposed NZRI MSS-loaded CPW-fed (Co-Planar Waveguide four-element array antenna is designed on ceramic-bioplastic-ceramic sandwich substrate using high-frequency structure simulator (HFSS, a finite-element-method-based simulation tool. The gain and directivity of the antenna are significantly enhanced by incorporating the NZRI MSS with a 7 × 6 set of elements at the back of the antenna structure. Measurement results show that the maximum gains of the antenna increased from 6.21 dBi to 8.25 dBi, from 6.52 dBi to 9.05 dBi and from 10.54 dBi to 12.15 dBi in the first, second and third bands, respectively. The effect of the slot configuration in the ground plane on the reflection coefficient of the antenna was analyzed and optimized. The overall performance makes the proposed antenna appropriate for UHFFM (Ultra High Frequency Frequency Modulation telemetry-based space applications as well as mobile satellite, microwave radiometry and radio astronomy applications.

  18. Estimated Uncertainties in the Idaho National Laboratory Matched-Index-of-Refraction Lower Plenum Experiment

    International Nuclear Information System (INIS)

    Donald M. McEligot; Hugh M. McIlroy, Jr.; Ryan C. Johnson

    2007-01-01

    The purpose of the fluid dynamics experiments in the MIR (Matched-Index-of-Refraction) flow system at Idaho National Laboratory (INL) is to develop benchmark databases for the assessment of Computational Fluid Dynamics (CFD) solutions of the momentum equations, scalar mixing, and turbulence models for typical Very High Temperature Reactor (VHTR) plenum geometries in the limiting case of negligible buoyancy and constant fluid properties. The experiments use optical techniques, primarily particle image velocimetry (PIV) in the INL MIR flow system. The benefit of the MIR technique is that it permits optical measurements to determine flow characteristics in passages and around objects to be obtained without locating a disturbing transducer in the flow field and without distortion of the optical paths. The objective of the present report is to develop understanding of the magnitudes of experimental uncertainties in the results to be obtained in such experiments. Unheated MIR experiments are first steps when the geometry is complicated. One does not want to use a computational technique, which will not even handle constant properties properly. This report addresses the general background, requirements for benchmark databases, estimation of experimental uncertainties in mean velocities and turbulence quantities, the MIR experiment, PIV uncertainties, positioning uncertainties, and other contributing measurement uncertainties

  19. Measurement of spatial refractive index distributions of fusion spliced optical fibers by digital holographic microtomography

    Science.gov (United States)

    Pan, Feng; Deng, Yating; Ma, Xichao; Xiao, Wen

    2017-11-01

    Digital holographic microtomography is improved and applied to the measurements of three-dimensional refractive index distributions of fusion spliced optical fibers. Tomographic images are reconstructed from full-angle phase projection images obtained with a setup-rotation approach, in which the laser source, the optical system and the image sensor are arranged on an optical breadboard and synchronously rotated around the fixed object. For retrieving high-quality tomographic images, a numerical method is proposed to compensate the unwanted movements of the object in the lateral, axial and vertical directions during rotation. The compensation is implemented on the two-dimensional phase images instead of the sinogram. The experimental results exhibit distinctly the internal structures of fusion splices between a single-mode fiber and other fibers, including a multi-mode fiber, a panda polarization maintaining fiber, a bow-tie polarization maintaining fiber and a photonic crystal fiber. In particular, the internal structure distortion in the fusion areas can be intuitively observed, such as the expansion of the stress zones of polarization maintaining fibers, the collapse of the air holes of photonic crystal fibers, etc.

  20. Modern rheology and electric induction: multivalued index of refraction, splitting of eigenvalues and fatigue

    Directory of Open Access Journals (Sweden)

    M. Caputo

    1996-06-01

    Full Text Available The modern constitutive equations of the rheology of analeptic media and of the polarization in dielectric media are discussed in the time and frequency domains. It is seen that the most appropriate form of the constitutive equations of these media is based on the convolution of the stress and strain, and of the electric field and induction respectively, with appropriate functions representing the memory of the medium to previous stress or induction. The most successful memory forma]ism in representing the observed phenomena is that of the derivative of fractional order which allows a variety of problems to be solved by means of the Laplace Trans- form. The consequent index of refraction, generally, is a set valued function which implies that a monochromatic wave generated in the medium is split into a set of waves with the same frequency but different wavelength which interfere and have a quasi periodically varying amplitude. The eigenfunctions of these media, associated to the ordinarily used principal values of the index of retraction, are split and so are the tree modes. The fatigue of anelastic media is studied using the new constitutive equations containing fractional derivatives; a phenomenological method is introduced to compute the number of cycles which gives fatigue for a strain or stress with given amplitude and frequency. The number of cycles which may cause fatigue is proportional to the amplitude and frequency of the applied strain or stress, or inversely proportional to the rate of stress or strain. A criterion is also established to see whether an applied cyclic stress or strain may cause fatigue. This criterion is tested with experimental data on steel and rocks verifying that, in general, it is consistent with the data although thc data are not always in the linear range. It is tentatively seen that fatigue docs not seem one of the causes of the release of the elastic energy stored in the Earth.

  1. THE EFFECTS OF EXPERIMENTAL CONDITIONS ON THE REFRACTIVE INDEX AND DENSITY OF LOW-TEMPERATURE ICES: SOLID CARBON DIOXIDE

    Energy Technology Data Exchange (ETDEWEB)

    Loeffler, M. J.; Moore, M. H.; Gerakines, P. A. [Astrochemistry Laboratory, Code 691, NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States)

    2016-08-20

    We present the first study on the effects of the deposition technique on the measurements of the visible refractive index and the density of a low-temperature ice using solid carbon dioxide (CO{sub 2}) at 14–70 K as an example. While our measurements generally agree with previous studies that show a dependence of index and density on temperature below 50 K, we also find that the measured values depend on the method used to create each sample. Below 50 K, we find that the refractive index varied by as much as 4% and the density by as much as 16% at a single temperature depending on the deposition method. We also show that the Lorentz–Lorenz approximation is valid for solid CO{sub 2} across the full 14–70 K temperature range, regardless of the deposition method used. Since the refractive index and density are important in calculations of optical constants and infrared (IR) band strengths of materials, our results suggest that the deposition method must be considered in cases where n {sub vis} and ρ are not measured in the same experimental setup where the IR spectral measurements are made.

  2. Negative refractive index and acoustic superlens from multiple scattering in single negative metamaterials.

    Science.gov (United States)

    Kaina, Nadège; Lemoult, Fabrice; Fink, Mathias; Lerosey, Geoffroy

    2015-09-03

    Metamaterials, man-made composite media structured on a scale much smaller than a wavelength, offer surprising possibilities for engineering the propagation of waves. One of the most interesting of these is the ability to achieve superlensing--that is, to focus or image beyond the diffraction limit. This originates from the left-handed behavior--the property of refracting waves negatively--that is typical of negative index metamaterials. Yet reaching this goal requires the design of 'double negative' metamaterials, which act simultaneously on the permittivity and permeability in electromagnetics, or on the density and compressibility in acoustics; this generally implies the use of two different kinds of building blocks or specific particles presenting multiple overlapping resonances. Such a requirement limits the applicability of double negative metamaterials, and has, for example, hampered any demonstration of subwavelength focusing using left-handed acoustic metamaterials. Here we show that these strict conditions can be largely relaxed by relying on media that consist of only one type of single resonant unit cell. Specifically, we show with a simple yet general semi-analytical model that judiciously breaking the symmetry of a single negative metamaterial is sufficient to turn it into a double negative one. We then demonstrate that this occurs solely because of multiple scattering of waves off the metamaterial resonant elements, a phenomenon often disregarded in these media owing to their subwavelength patterning. We apply our approach to acoustics and verify through numerical simulations that it allows the realization of negative index acoustic metamaterials based on Helmholtz resonators only. Finally, we demonstrate the operation of a negative index acoustic superlens, achieving subwavelength focusing and imaging with spot width and resolution 7 and 3.5 times better than the diffraction limit, respectively. Our findings have profound implications for the

  3. MATCHED-INDEX-OF-REFRACTION FLOW FACILITY FOR FUNDAMENTAL AND APPLIED RESEARCH

    Energy Technology Data Exchange (ETDEWEB)

    Piyush Sabharwall; Carl Stoots; Donald M. McEligot; Richard Skifton; Hugh McIlroy

    2014-11-01

    Significant challenges face reactor designers with regard to thermal hydraulic design and associated modeling for advanced reactor concepts. Computational thermal hydraulic codes solve only a piece of the core. There is a need for a whole core dynamics system code with local resolution to investigate and understand flow behavior with all the relevant physics and thermo-mechanics. The matched index of refraction (MIR) flow facility at Idaho National Laboratory (INL) has a unique capability to contribute to the development of validated computational fluid dynamics (CFD) codes through the use of state-of-the-art optical measurement techniques, such as Laser Doppler Velocimetry (LDV) and Particle Image Velocimetry (PIV). PIV is a non-intrusive velocity measurement technique that tracks flow by imaging the movement of small tracer particles within a fluid. At the heart of a PIV calculation is the cross correlation algorithm, which is used to estimate the displacement of particles in some small part of the image over the time span between two images. Generally, the displacement is indicated by the location of the largest peak. To quantify these measurements accurately, sophisticated processing algorithms correlate the locations of particles within the image to estimate the velocity (Ref. 1). Prior to use with reactor deign, the CFD codes have to be experimentally validated, which requires rigorous experimental measurements to produce high quality, multi-dimensional flow field data with error quantification methodologies. Computational thermal hydraulic codes solve only a piece of the core. There is a need for a whole core dynamics system code with local resolution to investigate and understand flow behavior with all the relevant physics and thermo-mechanics. Computational techniques with supporting test data may be needed to address the heat transfer from the fuel to the coolant during the transition from turbulent to laminar flow, including the possibility of an early

  4. Note: Optical fiber milled by focused ion beam and its application for Fabry-Pérot refractive index sensor

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Wang, Fei; Savenko, Alexey

    2011-01-01

    We introduce a highly compact fiber-optic Fabry-Pérot refractive index sensor integrated with a fluid channel that is fabricated directly near the tip of a 32 μm in diameter single-mode fiber taper. The focused ion beam technique is used to efficiently mill the microcavity from the fiber side...... and finely polish the end facets of the cavity with a high spatial resolution. It is found that a fringe visibility of over 15 dB can be achieved and that the sensor has a sensitivity of ∼1731 nm/RIU (refractive index units) and a detection limit of ∼5.78 × 10−6 RIU. This miniature integrated all-in-fiber...

  5. Carrier-induced change in refractive index of InP, GaAs, and InGaAsP

    International Nuclear Information System (INIS)

    Bennett, B.R.; Soref, R.A.; Del Alamo, J.A.

    1990-01-01

    The authors have theoretically estimated the change in refractive index Δn produced by injection of free carriers in InP, GaAs, and InGaAsP. Bandfilling (Burstein-Moss effect), band-gap shrinkage, and free-carrier absorption (plasma effect) were included. Carrier concentrations of 10 16 /cm 3 to 10 19 /cm 3 and photon energies of 0.8 to 2.0 eV were considered. Predictions of Δn are in reasonably good agreement with the limited experimental data available. Refractive index changes as large as 10 - 2 are predicted for carrier concentrations of 10 18 /cm 3 , suggesting that low-loss optical phase modulators and switches using carrier injection are feasible in these materials

  6. Tunable effective nonlinear refractive index of graphene dispersions during the distortion of spatial self-phase modulation

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Gaozhong; Zhang, Saifeng, E-mail: sfzhang@siom.ac.cn, E-mail: jwang@siom.ac.cn; Cheng, Xin; Dong, Ningning; Zhang, Long; Wang, Jun, E-mail: sfzhang@siom.ac.cn, E-mail: jwang@siom.ac.cn [Key Laboratory of Materials for High-Power Laser, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800 (China); Umran, Fadhil A. [State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800 (China); Institute of Laser for Post Graduate Studies, Baghdad University, Baghdad (Iraq); Coghlan, Darragh; Blau, Werner J. [Key Laboratory of Materials for High-Power Laser, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800 (China); School of Physics and the Centre for Research on Adaptive Nanostructures and Nanodevices (CRANN), Trinity College Dublin, Dublin 2 (Ireland); Cheng, Ya [State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800 (China)

    2014-04-07

    Spatial self-phase modulation (SSPM) was observed directly when a focused He-Ne laser beam at 633 nm went through liquid-phase-exfoliated graphene dispersions. The diffraction pattern of SSPM was found to be distorted rapidly right after the incident beam horizontally passing through the dispersions, while no distortion for the vertically incident geometry. We show that the distortion is originated mainly from the non-axis-symmetrical thermal convections of the graphene nanosheets induced by laser heating, and the relative change of nonlinear refractive index can be determined by the ratio of the distortion angle to the half-cone angle. Therefore, the effective nonlinear refractive index of graphene dispersions can be tuned by changing the incident intensity and the temperature of the dispersions.

  7. Optical design of 200-lm/W phosphorescent green light emitting devices based on the high refractive index substrate

    Energy Technology Data Exchange (ETDEWEB)

    Mikami, Akiyoshi [Department of Electrical Engineering, Kanazawa Institute of Technology, Nonoichimachi, Ishikawa 921-8501 (Japan)

    2011-09-15

    Light extraction efficiency has been successfully enhanced by using high refractive index substrate coupled with micro-lens array and weak micro-cavity structure. Optical energy intensity including waveguide, substrate and external modes was analyzed based on wave optics. It was shown that most of the waveguide mode is turned to the substrate mode by the effect of high index refraction substrate. About a half of the light can be extracted from the substrate by the assistance of surface textured structure. An external quantum efficiency of 57% and a power efficiency of over 200-lm/W were obtained in a green phosphorescent device. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  8. Applications of Optical Interferometer Techniques for Precision Measurements of Changes in Temperature, Growth and Refractive Index of Materials

    Directory of Open Access Journals (Sweden)

    Rami Reddy Bommareddi

    2014-05-01

    Full Text Available Optical metrology techniques used to measure changes in thickness; temperature and refractive index are surveyed. Optical heterodyne detection principle and its applications for precision measurements of changes in thickness and temperature are discussed. Theoretical formulations are developed to estimate crystal growth rate, surface roughness and laser cooling/heating of solids. Applications of Michelson and Mach-Zehnder interferometers to measure temperature changes in laser heating of solids are described. A Mach-Zehnder interferometer is used to measure refractive index and concentration variations of solutions in crystal growth experiments. Additionally, fluorescence lifetime sensing and fluorescence ratio method are described for temperature measurement. For all the above techniques, uncertainty calculations are included.

  9. Broadband metamaterial lens antennas with special properties by controlling both refractive-index distribution and feed directivity

    Science.gov (United States)

    Ma, Qian; Shi, Chuan Bo; Chen, Tian Yi; Qing Qi, Mei; Li, Yun Bo; Cui, Tie Jun

    2018-04-01

    A new method is proposed to design gradient refractive-index metamaterial lens antennas by optimizing both the refractive-index distribution of the lens and the feed directivity. Comparing to the conventional design methods, source optimization provides a new degree of freedom to control aperture fields effectively. To demonstrate this method, two lenses with special properties based on this method are designed, to emit high-efficiency plane waves and fan-shaped beams, respectively. Both lenses have good performance and wide frequency band from 12 to 18 GHz, verifying the validity of the proposed method. The plane-wave emitting lens realized a high aperture efficiency of 75%, and the fan-beam lens achieved a high gain of 15 dB over board bandwidth. The experimental results have good agreement with the design targets and full-wave simulations.

  10. Measurements of refractive index and size of a spherical drop from Gaussian beam scattering in the primary rainbow region

    Science.gov (United States)

    Yu, Haitao; Sun, Hui; Shen, Jianqi; Tropea, Cameron

    2018-03-01

    The primary rainbow observed when light is scattered by a spherical drop has been exploited in the past to measure drop size and relative refractive index. However, if higher spatial resolution is required in denser drop ensembles/sprays, and to avoid then multiple drops simultaneously appearing in the measurement volume, a highly focused beam is desirable, inevitably with a Gaussian intensity profile. The present study examines the primary rainbow pattern resulting when a Gaussian beam is scattered by a spherical drop and estimates the attainable accuracy when extracting size and refractive index. The scattering is computed using generalized Lorenz-Mie theory (GLMT) and Debye series decomposition of the Gaussian beam scattering. The results of these simulations show that the measurement accuracy is dependent on both the beam waist radius and the position of the drop in the beam waist.

  11. Measurement of the refractive index of soft contact lenses during wear.

    Science.gov (United States)

    Varikooty, Jalaiah; Keir, Nancy; Woods, Craig A; Fonn, Desmond

    2010-01-01

    To determine whether the refractive index (RI) of a soft contact lens can be evaluated using refractometry while the lens remains on the eye and to compare this with more traditional ex vivo RI measurements. A slitlamp apparatus was modified to incorporate a customized Atago hand refractometer. With a double-masked study design, nine adapted symptomatic soft contact lens wearers wore a contact lens in each eye (lotrafilcon B and etafilcon A) in a randomized order. In vivo RI was determined from the relative Brix scale measurements immediately after lens insertion and after 1 and 10 hr of lens wear. Ex vivo refractometry was performed after 10 hr of lens wear for comparison. Means +/- standard errors of the means are reported. In vivo RI values at baseline were 1.422 +/- 0.0004 (lotrafilcon B) and 1.405 +/- 0.0021 (etafilcon A); after 1 hr of lens wear, values were 1.423 +/- 0.0006 and 1.408 +/- 0.0007, respectively; and after 10 hr of lens wear, values were 1.424 +/- 0.0004 and 1.411 +/- 0.0010, respectively. Ex vivo RI values at the end of the 10 hr wearing period were 1.424 +/- 0.0003 (lotrafilcon B) and 1.412 +/- 0.0017 (etafilcon A). The change in in vivo RI across the day was statistically significant for the etafilcon A lens (repeated-measures analysis of variance, P0.05). This novel adaptation of refractometry was able to measure the RI of soft contact lenses during wear (without lens removal). End of day RI measurements using in vivo and ex vivo refractometry were comparable with each other. Future work is required to determine whether this in vivo method can improve our understanding of the relationships between soft contact lens RI, hydration, on-eye lens performance, and symptomology.

  12. High Refractive Index Silicone Gels for Simultaneous Total Internal Reflection Fluorescence and Traction Force Microscopy of Adherent Cells

    Science.gov (United States)

    Besser, Achim; Sundd, Prithu; Ley, Klaus; Danuser, Gaudenz; Ginsberg, Mark H.; Groisman, Alex

    2011-01-01

    Substrate rigidity profoundly impacts cellular behaviors such as migration, gene expression, and cell fate. Total Internal Reflection Fluorescence (TIRF) microscopy enables selective visualization of the dynamics of substrate adhesions, vesicle trafficking, and biochemical signaling at the cell-substrate interface. Here we apply high-refractive-index silicone gels to perform TIRF microscopy on substrates with a wide range of physiological elastic moduli and simultaneously measure traction forces exerted by cells on the substrate. PMID:21961031

  13. Modeling of single mode optical fiber having a complicated refractive index profile by using modified scalar finite element method

    OpenAIRE

    Raghuwanshi, S.K.; Rahman, B. M.

    2016-01-01

    A numerical method based on modified scalar finite element method (SC-FEM) is presented and programmed on MATLAB platform for optical fiber modeling purpose. We have estimated the dispersion graph, mode cut off condition, and group delay and waveguide dispersion for highly complicated chirped type refractive index profile fiber. The convergence study of our FEM formulation is carried out with respect to the number of division in core. It has been found that the numerical error becomes less th...

  14. Simultaneous interferometric measurement of linear coefficient of thermal expansion and temperature-dependent refractive index coefficient of optical materials.

    Science.gov (United States)

    Corsetti, James A; Green, William E; Ellis, Jonathan D; Schmidt, Greg R; Moore, Duncan T

    2016-10-10

    Characterizing the thermal properties of optical materials is necessary for understanding how to design an optical system for changing environmental conditions. A method is presented for simultaneously measuring both the linear coefficient of thermal expansion and the temperature-dependent refractive index coefficient of a sample interferometrically in air. Both the design and fabrication of the interferometer is presented as well as a discussion of the results of measuring both a steel and a CaF2 sample.

  15. Influence of vibrations and rotations of diatomic molecules on their physical properties: II. Refractive index, reactivity and diffusion coefficients

    International Nuclear Information System (INIS)

    Sharipov, Alexander S; Loukhovitski, Boris I; Starik, Alexander M

    2016-01-01

    The influence of the excitation of vibrational and rotational states of diatomic molecules (H 2 , N 2 , O 2 , NO, OH, CO, CH, HF and HCl) on refractive index, reactivity and transport coefficients was analyzed by using ab initio calculated data on the effective state-specific dipole moment and static polarizability obtained in the preceding paper of the present series. It has been revealed that, for non-polar molecules, the excitation both of vibrational and rotational degrees of freedom increases the averaged polarizability and, as a consequence, the refractive index. Meanwhile, for polar molecules, the effect of molecule excitation is more complex: it can either increase or decrease the refractive index. It was also shown that the excitation of molecules slightly influences the rate constants of barrierless chemical reactions between neutral particles; whereas, for ion–molecule reactions, this effect can be more pronounced. Analysis of the variation of diffusion coefficients, taking into account the effect of molecule excitation both on the collision diameter and on the well depth of intermolecular potential, exhibited that, for non-polar molecules, the effect associated with the change of collision diameter prevails. However, for polar molecules, the effect of the excitation of vibrational states on the well depth of intermolecular potential can compensate or even exceed the decrease of diffusion coefficient due to the averaged collision diameter rise. (paper)

  16. Guided-Mode-Leaky-Mode-Guided-Mode Fiber Interferometer and Its High Sensitivity Refractive Index Sensing Technology

    Directory of Open Access Journals (Sweden)

    Qi Wang

    2016-06-01

    Full Text Available A cascaded symmetrical dual-taper Mach-Zehnder interferometer structure based on guided-mode and leaky-mode interference is proposed in this paper. Firstly, the interference spectrum characteristics of interferometer has been analyzed by the Finite Difference-Beam Propagation Method (FD-BPM. When the diameter of taper waist is 20 μm–30 μm, dual-taper length is 1 mm and taper distance is 4 cm–6 cm, the spectral contrast is higher, which is suitable for sensing. Secondly, experimental research on refractive index sensitivity is carried out. A refractive index sensitivity of 62.78 nm/RIU (refractive index unit can achieved in the RI range of 1.3333–1.3792 (0%~25% NaCl solution, when the sensor structure parameters meet the following conditions: diameter of taper waist is 24 μm, dual-taper length is 837 μm and taper distance is 5.5 cm. The spectrum contrast is 0.8 and measurement resolution is 1.6 × 10−5 RIU. The simulation analysis is highly consistent with experimental results. Research shows that the sensor has promising application in low RI fields where high-precision measurement is required due to its high sensitivity and stability.

  17. Nonlinear intersubband absorption and refractive index changes in square and graded quantum well modulated by temperature and Hydrostatic pressure

    International Nuclear Information System (INIS)

    Ozturk, Emine; Sokmen, Ismail

    2013-01-01

    In this study, the effects of hydrostatic pressure and temperature on the linear and nonlinear intersubband transitions and the refractive index changes in the conduction band of square and graded quantum well (QW) are theoretically calculated within the framework of effective mass approximation. Results obtained show that the energy levels in different QWs and intersubband properties can be modified and controlled by the hydrostatic pressure and temperature. The modulation of the absorption coefficients and the refractive index changes which can be suitable for good performance optical modulators and various infrared optical device applications can be easily obtained by tuning the temperature and the hydrostatic pressure. - Highlights: ► Linear and nonlinear optical processes can be changed by pressure and temperature. ► Magnitude and energy of absorption peaks decrease as pressure increases. ► Refractive index changes in magnitude and energy decrease by increasing pressure. ► Energy differences are dependent on pressure, temperature and QW shapes. ► By increasing pressure we can obtain redshift in the optical transitions. ► For SQW, the absorption spectrum shows blueshift as the temperature increases. ► For GQW, the absorption spectrum shows redshift by temperature.

  18. Refractive index sensing and surface-enhanced Raman spectroscopy using silver–gold layered bimetallic plasmonic crystals

    Directory of Open Access Journals (Sweden)

    Somi Kang

    2017-11-01

    Full Text Available Herein we describe the fabrication and characterization of Ag and Au bimetallic plasmonic crystals as a system that exhibits improved capabilities for quantitative, bulk refractive index (RI sensing and surface-enhanced Raman spectroscopy (SERS as compared to monometallic plasmonic crystals of similar form. The sensing optics, which are bimetallic plasmonic crystals consisting of sequential nanoscale layers of Ag coated by Au, are chemically stable and useful for quantitative, multispectral, refractive index and spectroscopic chemical sensing. Compared to previously reported homometallic devices, the results presented herein illustrate improvements in performance that stem from the distinctive plasmonic features and strong localized electric fields produced by the Ag and Au layers, which are optimized in terms of metal thickness and geometric features. Finite-difference time-domain (FDTD simulations theoretically verify the nature of the multimode plasmonic resonances generated by the devices and allow for a better understanding of the enhancements in multispectral refractive index and SERS-based sensing. Taken together, these results demonstrate a robust and potentially useful new platform for chemical/spectroscopic sensing.

  19. Influence of deposition parameters on the refractive index and growth rate of diamond-like carbon films

    International Nuclear Information System (INIS)

    Zhang, G.F.; Zheng, X.; Guo, L.J.; Liu, Z.T.; Xiu, N.K.

    1994-01-01

    In order to use diamond-like carbon (DLC) films as protective and antireflection coatings for IR optical materials exposed to hostile environments, an investigation has been systematically conducted on the influence of the deposition parameters on the refractive index and growth rate of DLC films, which are two of the most important parameters in evaluating optical characteristics of antireflection coatings. The experimental results show that both the refractive index and growth rate of DLC films depend strongly on the negative d.c. bias voltage. The refractive index increases with increasing bias voltage and decreases with increasing partial pressure of the hydrocarbon gas and total flow rate of the mixture. The growth rate increases greatly when the bias voltage is larger than a threshold value. The various parameters which influence the structure and properties of DLC films are interrelated. Fourier transform IR spectroscopy results show that the strength of the C-H stretching absorption band in the range 3300-2850 cm -1 is gradually weakened with increasing negative bias voltage and argon concentration. High energy bombardment of the growing film plays an important role in the structure and hence the properties of DLC films. (orig.)

  20. Refractive index of ternary and quaternary compound semiconductors below the fundamental absorption edge: Linear and nonlinear effects

    International Nuclear Information System (INIS)

    Jensen, B.; Torabi, A.

    1985-01-01

    The index of refraction n is calculated as a function of frequency and mole fraction x for the following compounds: Hg/sub l-x/Cd/sub x/Te, Al/sub x/Ga/sub l-x/As, and In/sub l-x/Ga/sub x/As/sub y/P/sub l-y/ lattice matched to InP. Lattice matching of In/sub l-x/Ga/sub x/As/sub y/P/sub l-y/ to InP requires that x = 0.466 y. The theoretical result for the refractive index is obtained from a quantum mechanical calculation of the dielectric constant of a compound semiconductor. It is given in terms of the basic material parameters of band gap energy, effective electron mass m/sub n/, effective heavy hole mass m/sub rho/, spin orbit splitting energy, lattice constant, and carrier concentration n/sub e/ or rho for n-type or rho-type materials, respectively. If these quantities are known as functions of mole fraction x, there are no adjustable parameters involved. A negative change in the refractive index near the fundamental absorption edge is predicted on passing radiation through a crystal if the change in carrier concentration of the initially unoccupied conduction band is assumed proportional to internal intensity I. Comparison of theory with experimental data is given

  1. An alternative method to determine the refractive index of Al{sub x}Ga{sub 1−x}N

    Energy Technology Data Exchange (ETDEWEB)

    Engelbrecht, J.A.A., E-mail: Japie.Engelbrecht@nmmu.ac.za [Physics Department, NMMU, Port Elizabeth (South Africa); HRTEM Facility, NMMU, Port Elizabeth (South Africa); Sephton, B. [Physics Department, NMMU, Port Elizabeth (South Africa); Minnaar, E. [HRTEM Facility, NMMU, Port Elizabeth (South Africa); Wagener, M.C. [Physics Department, NMMU, Port Elizabeth (South Africa)

    2016-01-01

    Certain characterizations of Al{sub x}Ga{sub 1−x}N epilayers require knowledge of the refractive index. Four theoretical models are reviewed, and a simple method to obtain the refractive index n of Al{sub x}Ga{sub 1−x}N is proposed. Values of the refractive index obtained at various wavelengths and Al concentrations are compared to the theoretical models, as well as to previously obtained experimental results. Acceptable agreement with both theoretical and experimental values are obtained.

  2. Atomic force microscopy for the determination of refractive index profiles of optical fibres and waveguides: a quantitative study

    International Nuclear Information System (INIS)

    Huntington, S.T.; Mulvaney, P.; Roberts, K.A.

    1997-01-01

    The use of preferential etching and atomic force microscopy to measure refractive index profiles of optical fibres is investigated. Both the etch rate and the position of lateral features are shown to be independent of etch time. An elliptical core fibre has been studied and the resultant profile found to be in qualitative agreement with the preform index profile. It is shown, however, that the ellipticity of the core has changed during the drawing process. The method has been extended to fluorine and germanium doped planar waveguides and the results correlated with the fabrication process

  3. Fabrication and characterization of a dual layer multiple refractive index benzocyclobutene polymer platform for integrated optical devices

    Science.gov (United States)

    Yahya, N. A. M.; Lim, W. H.; Dambul, K. D.; Phang, S. W.; Ahmad, H.; Zakaria, R.; Mahamd Adikan, F. R.

    2012-09-01

    A dual layer Benzocyclobutene (BCB) polymer with tailored refractive index values is successfully fabricated using different curing processes, forming a platform for integrated optical devices. The dual layer BCB polymer could potentially solve the high index contrast issue associated with existing glass-polymer structure, which require sub-micron precision when producing single-mode waveguides. Although the two BCB layers display similar physical properties, they have significantly different optical and chemical characteristics. The different curing processes for the undercladding and core layers led to these differences. Single mode waveguides fabricated via photolithography were also demonstrated with an average propagation loss of 2 dB/cm.

  4. Sensitivity and Contribution of Organic Aerosols to Aerosol Optical Properties Based on Their Refractive Index and Hygroscopicity

    Directory of Open Access Journals (Sweden)

    Chang Hoon Jung

    2016-05-01

    Full Text Available Organic carbon (OC accounts for a large fraction of particulate matter. Since many atmospheric organic compounds have different optical properties, it is difficult to determine the optical properties of OC accurately. In particular, hygroscopicity and light absorption of OC are important factors in understanding the aerosol optical properties. In this study, the sensitivity of organic carbon (OC to aerosol optical properties was tested. Both the refractive index and the hygroscopicity of OC were considered. Based on the filter-based monthly averaged sampling measurement data from an intensive observation site in Seoul, Korea, the contribution of each component on the aerosol optical properties was estimated. The aerosol optical properties were simulated by combining the aerosol dynamic model for polydispersed aerosols with an optical properties model based on Mie code. The optical properties were compared with the AERONET Aerosol Optical Thickness (AOT measurement data. In order to estimate the contribution of the light absorption and hygroscopicity of organic carbon (OC on the optical properties of the aerosols, a sensitivity test was conducted with different imaginary refractive indices and OC hygroscopic growth factors. The results show that mass absorption efficiency can be fitted linearly as the imaginary refractive index increases. This means that one can estimate the mass absorption efficiency of OC as a function of the imaginary refractive index. The results also show that mass extinction and absorption efficiency decrease as the hygroscopic factor of OC increases because of the increase in water content. The contribution of OC to the mass extinction efficiency, however, depends on the chemical composition of other aerosol mixtures and hence, more comprehensive studies are required in this regard.

  5. The measurement of average refractive index with substrate-calibrating by using complex frequency-domain optical coherence tomography method

    Science.gov (United States)

    Huang, Hao-chong; Jiang, Zhu-qing; Cai, Wen-yuan; Wang, Yun-xin; Wan, Yu-hong

    2013-08-01

    Optical Coherence Tomography (OCT) was successfully applied in the microstructure imaging of biological tissue after being proposed firstly in 1991 by the researchers of MIT. As a novel optical imaging technology, it mainly uses interference principles to achieve noninvasive and high resolution visualization of samples. OCT works analogously to an ultrasound scanner, the major difference is that ultrasound pulses are replaced by broadband light. According to whether need for mechanical axial scan in the depth direction, it can be classified into the time-domain OCT (TD-OCT) and frequency-domain OCT (FD-OCT). The FD-OCT system overmatches the TD-OCT in imaging speed because of its depth collection advantage. But in the reconstructive image of FD-OCT detection, the complex-conjugate ambiguity will seriously deteriorate the imaging effect of tomogram. So the technique of removing the complex-conjugate image is employed that is called complex FD-OCT. The complex FD-OCT has widely application in many fields, especially in the refractive index measurement. The refractive index is an important parameter characterizing light propagation in the medium. In the paper, we present a method to measure the average refractive index of the sample with substrate calibration by using complex FD-OCT method, in which we can calculate it without depending on the parameters of system such as spectral width of light source. Due to the measurement of average refractive index relative to the actual thickness and optical length, it is necessary to obtain them of the sample experimentally. The complex FD-OCT method can easily achieved the optical length via measuring the positions of the sample's front and rear surfaces. In the experiment, the coverslip (the borosilicate glass) is chosen as the sample and the calibration substrate. We make use of the substrate to load the sample on it, and then the tomogram of the sample can be achieved by means of OCT's lateral scan in the edge of the sample

  6. Joint French-German radar measurements for the determination of the refractive index in the maritime boundary layer

    Science.gov (United States)

    Essen, Helmut; Danklmayer, Andreas; Förster, Jörg; Behn, Mario; Hurtaud, Yvonick; Fabbro, Vincent; Castanet, Laurent

    2012-10-01

    To predict the performance of coastal and shipborne radars, it is essential to assess the propagation characteristics of electromagnetic waves in the maritime boundary layer. To be independent upon environmental measurements, which are generally not as precise and reliable as they have to be for a proper input to simulation programs, usually based upon parabolic equation models, a method to retrieve the refractive index gradients in the low troposphere is the Refractivity from Clutter (RFC) algorithm. The propagation factor is computed from the received clutter power and is iteratively processed in order to retrieve the refractive index profiles. Under a respective French-German technical agreement a measurement program concerning radar propagation in the maritime boundary layer has been initiated, with contributions from ONERA-CERT, DGA MI / TN, Fraunhofer-FHR and the German Technical Center for Ships and Naval Weapons (WTD 71). The paper gives an overview on the RFC method with examples from the previous campaigns. It describes the experimental set-up and its methodology.

  7. Wavelength and NOx dependent complex refractive index of SOAs generated from the photooxidation of toluene

    Science.gov (United States)

    Nakayama, T.; Sato, K.; Matsumi, Y.; Imamura, T.; Yamazaki, A.; Uchiyama, A.

    2013-01-01

    Recently, secondary organic aerosols (SOAs) generated from anthropogenic volatile organic compounds have been proposed as a possible source of light-absorbing organic compounds, "brown carbon," in the urban atmosphere. However, the atmospheric importance of these SOAs remains unclear due to limited information about their optical properties. In this study, the complex refractive index (RI, m = n-ki values at 405, 532, and 781 nm of the SOAs generated during the photooxidation of toluene (toluene-SOAs) under a variety of initial nitrogen oxide (NOx = NO + NO2) conditions were examined by photoacoustic spectroscopy (PAS) and cavity ring-down spectroscopy (CRDS). The complex RI-values obtained in the present study and reported in the literature indicate that the k-value, which represents the light absorption of the toluene-SOAs, increased to shorter wavelengths at nitrate to organics ratio of the SOAs determined using a high-resolution time-of-flight aerosol mass spectrometer (H-ToF-AMS) also increased with increasing initial NOx concentration. The RI-values of the SOAs generated during the photooxidation of 1,3,5-trimethylbenzene in the presence of NOx (1,3,5-TMB-SOAs) were also determined to investigate the influence of the chemical structure of the precursor on the optical properties of the SOAs, and it was found that the light absorption of the 1,3,5-TMB-SOAs is negligible at all of the wavelengths investigated (405, 532, and 781 nm). These results can be reasonably explained by the hypothesis that nitroaromatic compounds, such as nitrocresols, are the major contributors to the light absorption of the toluene-SOAs. Using the obtained RI-values, mass absorption cross sections of the toluene-SOAs at 405 nm were estimated to be 0.08-0.52 m2g-1 under typical conditions in an urban atmosphere during the daytime. These results indicate that light absorption by the SOAs potentially contributes to the radiation balance at ultraviolet wavelengths below ~400 nm

  8. Measurement of refractive index by nanoparticle tracking analysis reveals heterogeneity in extracellular vesicles

    Directory of Open Access Journals (Sweden)

    Chris Gardiner

    2014-11-01

    Full Text Available Introduction: Optical techniques are routinely used to size and count extracellular vesicles (EV. For comparison of data from different methods and laboratories, suitable calibrators are essential. A suitable calibrator must have a refractive index (RI as close to that of EV as possible but the RI of EV is currently unknown. To measure EV, RI requires accurate knowledge of size and light scattering. These are difficult to measure as most EVs cannot be resolved by light microscopy and their diameter is smaller than the wavelength of visible light. However, nanoparticle tracking analysis (NTA provides both size and relative light scattering intensity (rLSI values. We therefore sought to determine whether it was possible to use NTA to measure the RI of individual EVs. Methods: NTA was used to measure the rLSI and size of polystyrene and silica microspheres of known size and RI (1.470 and 1.633, respectively and of EV isolated from a wide range of cells. We developed software, based on Mie scattering code, to calculate particle RI from the rLSI data. This modelled theoretical scattering intensities for polystyrene and silica microspheres of known size (100 and 200 nm and RI. The model was verified using data from the polystyrene and silica microspheres. Size and rLSI data for each vesicle were processed by the software to generate RI values. Results: The following modal RI measurements were obtained: fresh urinary EV 1.374, lyophilised urinary EV 1.367, neuroblastoma EV 1.393, blood EV 1.398, EV from activated platelets 1.390, small placental EV 1.364–1.375 and 1.398–1.414 for large placental EV (>200 nm. Large placental EV had a significantly higher RI than small placental EV (p1.40 were observed for some large (>200 nm microvesicles. Conclusion: This method for measuring EV RI will be useful for developing appropriate calibrators for EV measurement.

  9. TE modes of UV-laser generated waveguides in a planar polymer chip of parabolic refractive index profile

    Science.gov (United States)

    Shams El-Din, M. A.

    2018-04-01

    The UV-laser lithographic method is used for the preparation of Polymeric integrated-optical waveguides in a planar polymer chip. The waveguide samples are irradiated by an excimer laser of wavelength 248 nm with different doses and with the same fluencies. The refractive index depth profile for the waveguides, in the first zone is found to have a parabolic shape and Gaussian shape in the second one that can be determined by Mach-Zehnder interferometer. Both the mode field distribution and the effective mode indices for the first zone only are determined by making use of the theoretical mode and the experimental data. It is found that the model field distribution is strongly dependent on the refractive indices for each zone.

  10. Optical integrated chips with micro and nanostructures for refractive index and SERS-based optical label-free sensing

    Directory of Open Access Journals (Sweden)

    Liu Liu

    2015-11-01

    Full Text Available Label-free optical biosensing technologies have superior abilities of quantitative analysis, unmodified targets, and ultrasmall sample volume, compared to conventional fluorescence-label-based sensing techniques, in detecting various biomolecules. In this review article, we introduce our recent results in the field of evanescent-wavebased refractive index sensing and surface enhanced Raman scattering (SERS-based sensing, both of which are promising platforms for label-free optical biosensors. First, silicon-on-insulator (SOI nanowire waveguide and metallic surface plasmon resonance (SPR-based refractive index sensing are discussed. In order to improve the detection limit, phase interrogation techniques are introduced to these types of sensors based on prism-coupled SPR and SOI microring resonators. A detection limit in the order of 10−6 refractive index unit is achieved. Detection of 16.7 pM anti-IgG is also demonstrated based on the SPR devices. Second, SERS substrates based on various nanometallic structures are discussed. Metallic nanowire arrays and inverted nanopyramids and grooves with a thin metal surface are fabricated based on anisotropic wetetching of silicon substrates. Both structures have demonstrated a Raman signal enhancement on the order of 107. In order to improve the extraction efficiency of the Raman signal at a high wave number, a nano-bowtie array substrate is fabricated, which exhibits double resonances at both the excitation wavelength and the desired Raman scattering wavelength. Experimental results have shown that this double-resonance structure can further enhance the received Raman signal, as compared to conventional SERS substrates with only one resonance at the excitation wavelength.

  11. Optical integrated chips with micro and nanostructures for refractive index and SERS-based optical label-free sensing

    Science.gov (United States)

    Liu, Liu; Jin, Mingliang; Shi, Yaocheng; Lin, Jiao; Zhang, Yuan; Jiang, Li; Zhou, Guofu; He, Sailing

    2015-11-01

    Label-free optical biosensing technologies have superior abilities of quantitative analysis, unmodified targets, and ultrasmall sample volume, compared to conventional fluorescence-label-based sensing techniques, in detecting various biomolecules. In this review article, we introduce our recent results in the field of evanescent-wavebased refractive index sensing and surface enhanced Raman scattering (SERS)-based sensing, both of which are promising platforms for label-free optical biosensors. First, silicon-on-insulator (SOI) nanowire waveguide and metallic surface plasmon resonance (SPR)-based refractive index sensing are discussed. In order to improve the detection limit, phase interrogation techniques are introduced to these types of sensors based on prism-coupled SPR and SOI microring resonators. A detection limit in the order of 10-6 refractive index unit is achieved. Detection of 16.7 pM anti-IgG is also demonstrated based on the SPR devices. Second, SERS substrates based on various nanometallic structures are discussed. Metallic nanowire arrays and inverted nanopyramids and grooves with a thin metal surface are fabricated based on anisotropic wetetching of silicon substrates. Both structures have demonstrated a Raman signal enhancement on the order of 107. In order to improve the extraction efficiency of the Raman signal at a high wave number, a nano-bowtie array substrate is fabricated, which exhibits double resonances at both the excitation wavelength and the desired Raman scattering wavelength. Experimental results have shown that this double-resonance structure can further enhance the received Raman signal, as compared to conventional SERS substrates with only one resonance at the excitation wavelength.

  12. Vapor pressure, density, viscosity and refractive index of dimethyl sulfoxide + 1,4-dimethylbenzene system

    Directory of Open Access Journals (Sweden)

    OANA CIOCIRLAN

    2008-01-01

    Full Text Available This paper reports the experimental results of isothermal vapor–liquid equilibrium data between 303.15 and 333.15 K, and densities, viscosities, refractive indices from 298.15 to 323.15 K of the dimethyl sulfoxide + 1,4-dimethylbenzene system over the entire range of mixture composition. The obtained PTX data were correlated by the Wilson and NRTL models and estimated by the UNIFAC model. The excess Gibbs energy and activity coefficients were calculated and compared with others excess properties. Excess molar volumes, viscosity deviations and deviations in refractivity were calculated from the experimental data; all the computed quantities were fitted to the Redlich–Kister equation. The resulting excess functions were interpreted in terms of structure and interactions.

  13. Determining the refractive index of human hemoglobin solutions by Kramers-Kronig relations with an improved absorption model

    Science.gov (United States)

    Gienger, Jonas; Groß, Hermann; Neukammer, Jörg; Bär, Markus

    2016-11-01

    The real part of the refractive index (RI) of aqueous solutions of human hemoglobin is computed from their absorption spectra in the wavelength range $250\\,{\\rm nm} - 1100\\,{\\rm nm}$ using the Kramers-Kronig (KK) relations and the corresponding uncertainty analysis is provided. The strong ultraviolet (UV) and infrared absorbance of the water outside this spectral range were taken into account in a previous study employing KK relations. We improve these results by including the concentration dependence of the water absorbance as well as by modeling the deep UV absorbance of hemoglobin's peptide backbone. The two free parameters of the model for the deep UV absorbance are fixed by a global fit.

  14. Crustal Strain Observation Using a Two-Color Interferometer with Accurate Correction of Refractive Index of Air

    Directory of Open Access Journals (Sweden)

    Souichi Telada

    2014-07-01

    Full Text Available A highly accurate two-color interferometer with automatic correction of the refractive index of air was developed for crustal strain observation. The two-color interferometer, which can measure a geometrical distance of approximately 70 m, with a relative resolution of 2 × 10−9, clearly detected a change in strain due to earth tides in spite of optical measurement in air. Moreover, a large strain quake due to an earthquake could be observed without disturbing the measurement. We demonstrated the advantages of the two-color interferometer in air for geodetic observation.

  15. Analysis of photon-scanning tunneling microscope images of inhomogeneous samples: Determination of the local refractive index of channel waveguides

    International Nuclear Information System (INIS)

    Bourillot, E.; Fornel, F. de.; Goudonnet, J.P.

    1995-01-01

    Channel waveguides are imaged by a photon-scanning tunneling microscope (PSTM). The polarization of the light and its orientation with respect to the guide aids are shown to be very important parameters in the analysis of the images of such samples. We simulated image formation for the plane of incidence parallel to the axis of the guide. Our theoretical results are qualitatively in agreement with our measurements. These results show the ability of the PSTM to give information about the local refractive-index variations of a sample. 21 refs., 14 figs

  16. Determining the Index of Refraction of an Unknown Object using Passive Polarimetric Imagery Degraded by Atmospheric Turbulence

    Science.gov (United States)

    2010-08-09

    real part of the complex index of refraction is the ratio 16 of the speed of light in vacuum to the speed of light in the material, i.e., n = c υ (26...space”. Opt. Express, 17(25):22333–22340, 2009. URL http: //www.opticsexpress.org/abstract.cfm?URI=oe-17-25-22333. 208 [131] Tyo , J. Scott. “Enhancement...josaa.osa.org/abstract.cfm?URI= josaa-17-1-1. [132] Tyo , J. Scott. “Design of optimal polarimeters: maximization of signal-to- noise ratio and

  17. Knocking Detection of a Gasoline Engine by Utilizing an Optical Fiber with Specific Refractive-index Composition.

    Science.gov (United States)

    Komachiya, M; Sonobe, H; Fumino, T; Sakaguchi, T; Kawakami, K; Watanabe, S; Sasayama, T

    1998-03-01

    Abnormal combustion of a gasoline engine is often accompanied by a sharp metallic noise called knocking. A recently proposed method of in-cylinder pressure measurement is applied to detect the knocking, where the bending power loss of a single-mode fiber with specific refractive-index composition is utilized. The high-frequency response of a prototype sensor is obtained with a small structure to utilize the bending mechanism that is installed into an engine head gasket. Knocking signals are detected in a wide range of trace- to heavy-knock conditions.

  18. Long period gratings coated with hafnium oxide by plasma-enhanced atomic layer deposition for refractive index measurements.

    Science.gov (United States)

    Melo, Luis; Burton, Geoff; Kubik, Philip; Wild, Peter

    2016-04-04

    Long period gratings (LPGs) are coated with hafnium oxide using plasma-enhanced atomic layer deposition (PEALD) to increase the sensitivity of these devices to the refractive index of the surrounding medium. PEALD allows deposition at low temperatures which reduces thermal degradation of UV-written LPGs. Depositions targeting three different coating thicknesses are investigated: 30 nm, 50 nm and 70 nm. Coating thickness measurements taken by scanning electron microscopy of the optical fibers confirm deposition of uniform coatings. The performance of the coated LPGs shows that deposition of hafnium oxide on LPGs induces two-step transition behavior of the cladding modes.

  19. Determination of the refractive index and thickness of a thin film embedded in a given stratified medium.

    Science.gov (United States)

    Chabrier, G; Goudonnet, J P; Vernier, P

    1989-07-15

    A thin film deposited on the plane face of a glass substrate or a thin film embedded in a known stratified medium can be characterized by nondestructive optical measurements: transmittance and reflectance for several angles of incidence with s and p polarization. We present here a graphic method for determining the complex refractive index and thickness for thin film optical characterization. Light entering into the medium through a prism or half-cylinder [attenuated total reflection (ATR)] extends the usable angles. Applications are made to very thin metallic films and dielectric films (SiO(x)).

  20. A simplified analytical approach to calculation of the electromagnetic behavior of left-handed metamaterials with a graded refractive index profile

    Directory of Open Access Journals (Sweden)

    Dalarsson N.

    2007-01-01

    Full Text Available We investigated the spectral properties of a new class of nanostructured artificial composite materials with tailored electromagnetic response, i.e. negative refractive index materials, also known as "left-handed" metamaterials. We analyzed structures incorporating both ordinary positive index media and negative refractive index metamaterials where the interface may be graded to an arbitrary degree. Utilizing a modified version of the Rosen-Morse function, we derived analytical expressions for the field intensity and spectral reflection and transmission through a graded interface between positive and negative index materials. We compared our results to numerical solutions obtained using the transfer matrix technique. .

  1. Evaluation of a quantitative structure-property relationship (QSPR) for predicting mid-visible refractive index of secondary organic aerosol (SOA).

    Science.gov (United States)

    Redmond, Haley; Thompson, Jonathan E

    2011-04-21

    In this work we describe and evaluate a simple scheme by which the refractive index (λ = 589 nm) of non-absorbing components common to secondary organic aerosols (SOA) may be predicted from molecular formula and density (g cm(-3)). The QSPR approach described is based on three parameters linked to refractive index-molecular polarizability, the ratio of mass density to molecular weight, and degree of unsaturation. After computing these quantities for a training set of 111 compounds common to atmospheric aerosols, multi-linear regression analysis was conducted to establish a quantitative relationship between the parameters and accepted value of refractive index. The resulting quantitative relationship can often estimate refractive index to ±0.01 when averaged across a variety of compound classes. A notable exception is for alcohols for which the model consistently underestimates refractive index. Homogenous internal mixtures can conceivably be addressed through use of either the volume or mole fraction mixing rules commonly used in the aerosol community. Predicted refractive indices reconstructed from chemical composition data presented in the literature generally agree with previous reports of SOA refractive index. Additionally, the predicted refractive indices lie near measured values we report for λ = 532 nm for SOA generated from vapors of α-pinene (R.I. 1.49-1.51) and toluene (R.I. 1.49-1.50). We envision the QSPR method may find use in reconstructing optical scattering of organic aerosols if mass composition data is known. Alternatively, the method described could be incorporated into in models of organic aerosol formation/phase partitioning to better constrain organic aerosol optical properties.

  2. Laboratory estimate of the regional shortwave refractive index and single scattering albedo of mineral dust from major sources worldwide

    Science.gov (United States)

    Di Biagio, C.; Formenti, P.; Caponi, L.; Cazaunau, M.; Pangui, E.; Journet, E.; Nowak, S.; Caquineau, S.; Andreae, M. O.; Kandler, K.; Saeed, T.; Piketh, S.; Seibert, D.; Williams, E.; Balkanski, Y.; Doussin, J. F.

    2017-12-01

    Mineral dust is one of the most abundant aerosol species in the atmosphere and strongly contributes to the global and regional direct radiative effect. Still large uncertainties persist on the magnitude and overall sign of the dust direct effect, where indeed one of the main unknowns is how much mineral dust absorbs light in the shortwave (SW) spectral range. Aerosol absorption is represented both by the imaginary part (k) of the complex refractive index or the single scattering albedo (SSA, i.e. the ratio of the scattering to extinction coefficient). In this study we present a new dataset of SW complex refractive indices and SSA for mineral dust aerosols obtained from in situ measurements in the 4.2 m3 CESAM simulation chamber at LISA (Laboratoire Interuniversitaire des Systemes Atmospheriques) in Créteil, France. Investigated dust aerosol samples were issued from major desert sources worldwide, including the African Sahara and Sahel, Eastern Asia, the Middle East, Southern Africa, Australia, and the Americas, with differing iron oxides content. Results from the present study provide a regional mapping of the SW absorption by dust and show that the imaginary part of the refractive index largely varies (by up to a factor 6, 0.003-0.02 at 370 nm and 0.001-0.003 at 950 nm) for the different source areas due to the change in the particle iron oxide content. The SSA for dust varies between 0.75-0.90 at 370 nm and 0.95-0.99 at 950 nm, with the largest absorption observed for Sahelian and Australian dust aerosols. Our range of variability for k and SSA is well bracketed by already published literature estimates, but suggests that regional‒dependent values should be used in models. The possible relationship between k and the dust iron oxides content is investigated with the aim of providing a parameterization of the regional‒dependent dust absorption to include in climate models.

  3. Determination of refractive index and absorbance modulation amplitudes from angular selectivity of holograms in polymer material with phenanthrenequinone

    Science.gov (United States)

    Borisov, Vladimir; Veniaminov, Andrey

    2015-10-01

    Amplitude and phase contributions to mixed volume holographic gratings were extracted from measured contours of angular selectivity. Holograms for the investigation were recorded in the glassy polymer material with phenan-threnequinone (PQ) using the DPSS CW laser (532 nm) and then self-developed due to molecular diffusion of PQ, reaching diffraction efficiency about 40%. Refractive index and absorbance modulation amplitudes of those holograms were obtained as adjustable parameters from theoretical equations by fitting angular dependencies of zeros and 1st orders diffraction efficiency measured at 450, 473, 532, and 633 nm at the different stages of hologram development. Mixed gratings manifest themselves in asymmetrical transmittance selectivity contours with one minimum and one maximum shifted with respect to the Bragg angle, while symmetrical contours with a minimum or a maximum at the Bragg angle are characteristic of pure phase and amplitude gratings, respectively. In the course of a hologram development, it converts from a predominantly amplitude-mixed to almost purely phase one in the case of readout using a light within the absorption band of PQ and maintains the phase nature besides it. The value of refractive index amplitude is ranging from 5×10-6 to 10-4 and the value of absorbance amplitude is up to 140 m-1.

  4. Optical refractive index and static permittivity of mixed Zr-Si oxide thin films prepared by ion beam induced CVD

    Energy Technology Data Exchange (ETDEWEB)

    Ferrer, F.J. [Centro Nacional de Aceleradores, Av. Thomas A. Edison, 7, 41092 Sevilla (Spain)], E-mail: fjferrer@us.es; Frutos, F. [E.T.S. de Ingenieria Informatica, Avda. Reina Mercedes, s/n, 41012 Sevilla (Spain); Garcia-Lopez, J. [Centro Nacional de Aceleradores, Av. Thomas A. Edison, 7, 41092 Sevilla (Spain); Gonzalez-Elipe, A.R.; Yubero, F. [Insituto de Ciencia de Materiales de Sevilla, c/ Americo vespucio, no. 49, 41092 Sevilla (Spain)

    2007-12-03

    Mixed oxides Zr{sub x}Si{sub 1-x}O{sub 2} (0 < x < 1) thin films have been prepared at room temperature by decomposition of (CH{sub 3}CH{sub 2}O){sub 3}SiH and Zr[OC(CH{sub 3}){sub 3}]{sub 4} volatile precursors induced by mixtures of O{sub 2}{sup +} and Ar{sup +} ions. The films were flat and amorphous independently of the Si/Zr ratio and did not present phase segregation of the pure single oxides (SiO{sub 2} and ZrO{sub 2}). A 10-23 at.% of H and 1-5 at.% of C atoms remained incorporated in the films depending on the mixture ratio of the Si and Zr precursors and the composition of the bombarding gas used during the deposition process. These impurities are mainly forming hydroxyl and carboxylic groups. Optical refractive index and static permittivity of the films were determined by reflection NIR-Vis spectroscopy and C-V electrical characterization, respectively. It is found that the refractive index increases non-linearly from 1.45 to 2.10 as the Zr content in the thin films increases. The static permittivity also increases non-linearly from {approx} 4 for pure SiO{sub 2} to {approx} 15 for pure ZrO{sub 2}. Optical and electrical characteristics of the films are justified by their impurity content and the available theories.

  5. Rapid 3D Refractive-Index Imaging of Live Cells in Suspension without Labeling Using Dielectrophoretic Cell Rotation.

    Science.gov (United States)

    Habaza, Mor; Kirschbaum, Michael; Guernth-Marschner, Christian; Dardikman, Gili; Barnea, Itay; Korenstein, Rafi; Duschl, Claus; Shaked, Natan T

    2017-02-01

    A major challenge in the field of optical imaging of live cells is achieving rapid, 3D, and noninvasive imaging of isolated cells without labeling. If successful, many clinical procedures involving analysis and sorting of cells drawn from body fluids, including blood, can be significantly improved. A new label-free tomographic interferometry approach is presented. This approach provides rapid capturing of the 3D refractive-index distribution of single cells in suspension. The cells flow in a microfluidic channel, are trapped, and then rapidly rotated by dielectrophoretic forces in a noninvasive and precise manner. Interferometric projections of the rotated cell are acquired and processed into the cellular 3D refractive-index map. Uniquely, this approach provides full (360°) coverage of the rotation angular range around any axis, and knowledge on the viewing angle. The experimental demonstrations presented include 3D, label-free imaging of cancer cells and three types of white blood cells. This approach is expected to be useful for label-free cell sorting, as well as for detection and monitoring of pathological conditions resulting in cellular morphology changes or occurrence of specific cell types in blood or other body fluids.

  6. GPU-based rapid reconstruction of cellular 3D refractive index maps from tomographic phase microscopy (Conference Presentation)

    Science.gov (United States)

    Dardikman, Gili; Shaked, Natan T.

    2016-03-01

    We present highly parallel and efficient algorithms for real-time reconstruction of the quantitative three-dimensional (3-D) refractive-index maps of biological cells without labeling, as obtained from the interferometric projections acquired by tomographic phase microscopy (TPM). The new algorithms are implemented on the graphic processing unit (GPU) of the computer using CUDA programming environment. The reconstruction process includes two main parts. First, we used parallel complex wave-front reconstruction of the TPM-based interferometric projections acquired at various angles. The complex wave front reconstructions are done on the GPU in parallel, while minimizing the calculation time of the Fourier transforms and phase unwrapping needed. Next, we implemented on the GPU in parallel the 3-D refractive index map retrieval using the TPM filtered-back projection algorithm. The incorporation of algorithms that are inherently parallel with a programming environment such as Nvidia's CUDA makes it possible to obtain real-time processing rate, and enables high-throughput platform for label-free, 3-D cell visualization and diagnosis.

  7. Low-to-high refractive index contrast transition (RICT) device for low loss polymer-based optical coupling

    Science.gov (United States)

    Calabretta, N.; Cooman, I. A.; Stabile, R.

    2018-04-01

    We propose for the first time a coupling device concept for passive low-loss optical coupling, which is compatible with the ‘generic’ indium phosphide (InP) multi-project-wafer manufacturing. A low-to-high vertical refractive index contrast transition InP waveguide is designed and tapered down to adiabatically couple light into a top polymer waveguide. The on-chip embedded polymer waveguide is engineered at the chip facets for offering refractive-index and spot-size-matching to silica fiber-arrays. Numerical analysis shows that coupling losses lower than 1.5 dB can be achieved for a TE-polarized light between the InP waveguide and the on-chip embedded polymer waveguide at 1550 nm wavelength. The performance is mainly limited by the difficulty to control single-mode operation. However, coupling losses lower than 1.9 dB can be achieved for a bandwidth as large as 200 nm. Moreover, the foreseen fabrication process steps are indicated, which are compatible with the ‘generic’ InP multi-project-wafer manufacturing. A fabrication error tolerance study is performed, indicating that fabrication errors occur only in 0.25 dB worst case excess losses, as long as high precision lithography is used. The obtained results are promising and may open the route to large port counts and cheap packaging of InP-based photonic integrated chips.

  8. Fabrication of high refractive index TiO2 films using electron beam evaporator for all dielectric metasurfaces

    Science.gov (United States)

    Jalil, Sohail Abdul; Salman Ahmed, Qazi; Akram, Mahreen; Abbas, Naseem; Khalid, Ayesha; Khalil, Arslan; Luqman Khalid, Muhammad; Mudassar Mehar, Muhammad; Riaz, Kashif; Qasim Mehmood, Muhammad

    2018-01-01

    Flat optics suffer meager efficiency due to plasmonic losses at visible wavelengths. This issue has been addressed in this study by the substitution of dielectric materials. For this purpose, optical parameters (real and imaginary parts of refractive index) and surface roughness of TiO2 films were optimized, which are pre-requisite for the development of highly efficient dielectric metasurface devices. Electron beam evaporator was employed to deposit various ultrathin TiO2 films with subwavelength thickness. These deposited films were further processed via annealing at various temperatures to achieve the appropriate optical parameters. SEM analysis confirmed the absence of craters, cracks and rugged type features, whereas, AFM analysis revealed the smoothness of deposited films with least roughness. High refractive index above 2.2 with minimum absorption coefficient in the visible region was studied through ellipsometry analysis. FTIR spectroscopy showed transmission over 90% from the deposited thin film on glass substrate. The results of this study would have significant implications for material processing at nanoscale and dielectric metasurface fabrication which would in turn eliminate the requirement of costly and sophisticated setups for such fabrications.

  9. Effect of dextran-induced changes in refractive index and aggregation on optical properties of whole blood

    International Nuclear Information System (INIS)

    Xu Xiangqun; Wang, Ruikang K; Elder, James B; Tuchin, Valery V

    2003-01-01

    The purpose of the present study is to investigate systematically the mechanisms of alterations in the optical properties of whole blood immersed in the biocompatible agent dextran, and to define the optimal concentration of dextrans required for blood optical clearing in order to enhance the capability of light penetration depth for optical imaging applications. In the experiments, dextrans with different molecular weights and various concentrations were employed and investigated by the use of the optical coherence tomography technique. Changes in light attenuation, refractive index and aggregation properties of blood immersed in dextrans were studied. It was concluded from the results that the mechanisms for blood optical clearing are characteristic of the types of dextrans employed, their concentrations and the application stages. Among the substances applied, Dx500 at a concentration at 0.5 g dl -1 gives the best result in improving light penetration depth through the blood. The increase of light transmission at the beginning of the addition of dextrans is mainly attributed to refractive index matching between the scattering centres and the ground matter. Thereafter, the transmission change is probably due to a dextran-induced aggregation-disaggregation effect. Overall, light scattering in the blood could be effectively reduced by the application of dextrans. It represents a promising approach to increasing the imaging depth for in vivo optical imaging of biological tissue, for example optical coherence tomography

  10. Optical Nonlinear Refractive Index of Laser-Ablated Gold Nanoparticles Graphene Oxide Composite

    Directory of Open Access Journals (Sweden)

    Amir Reza Sadrolhosseini

    2014-01-01

    Full Text Available Gold nanoparticles were prepared in graphene oxide using laser ablation technique. The ablation times were varied from 10 to 40 minutes, and the particle size was decreased from 16.55 nm to 5.18 nm in spherical shape. The nanoparticles were capped with carboxyl and the hydroxyl groups were obtained from Fourier transform infrared spectroscopy. Furthermore, the UV-visible peak shifted with decreasing of nanoparticles size, appearing from 528 nm to 510 nm. The Z-scan technique was used to measure the nonlinear refractive indices of graphene oxide with different concentrations and a gold nanoparticle graphene oxide nanocomposite. Consequently, the optical nonlinear refractive indices of graphene oxide and gold nanoparticle graphene oxide nanocomposite were shifted from 1.63×10-9 cm2/W to 4.1×10-9 cm2/W and from 1.85×10-9 cm2/W to 5.8×10-9 cm2/W, respectively.

  11. The Predictive Power of Electronic Polarizability for Tailoring the Refractivity of High Index Glasses Optical Basicity Versus the Single Oscillator Model

    Energy Technology Data Exchange (ETDEWEB)

    McCloy, John S.; Riley, Brian J.; Johnson, Bradley R.; Schweiger, Michael J.; Qiao, Hong (Amy); Carlie, Nathan

    2010-06-01

    Four compositions of high density (~8 g/cm3) heavy metal oxide glasses composed of PbO, Bi2O3, and Ga2O3 were produced and refractivity parameters (refractive index and density) were computed and measured. Optical basicity was computed using three different models – average electronegativity, ionic-covalent parameter, and energy gap – and the basicity results were used to compute oxygen polarizability and subsequently refractive index. Refractive indices were measured in the visible and infrared at 0.633 μm, 1.55 μm, 3.39 μm, 5.35 μm, 9.29 μm, and 10.59 μm using a unique prism coupler setup, and data were fitted to the Sellmeier expression to obtain an equation of the dispersion of refractive index with wavelength. Using this dispersion relation, single oscillator energy, dispersion energy, and lattice energy were determined. Oscillator parameters were also calculated for the various glasses from their oxide values as an additional means of predicting index. Calculated dispersion parameters from oxides underestimate the index by 3 to 4%. Predicted glass index from optical basicity, based on component oxide energy gaps, underpredicts the index at 0.633 μm by only 2%, while other basicity scales are less accurate. The predicted energy gap of the glasses based on this optical basicity overpredicts the Tauc optical gap as determined by transmission measurements by 6 to 10%. These results show that for this system, density, refractive index in the visible, and energy gap can be reasonably predicted using only composition, optical basicity values for the constituent oxides, and partial molar volume coefficients. Calculations such as these are useful for a priori prediction of optical properties of glasses.

  12. Tomographic reconstruction of the refractive index with hard X-rays: an efficient method based on the gradient vector-field approach.

    Science.gov (United States)

    Gasilov, Sergei; Mittone, Alberto; Brun, Emmanuel; Bravin, Alberto; Grandl, Susanne; Mirone, Alessandro; Coan, Paola

    2014-03-10

    The refractive-index gradient vector field approach establishes a connection between a tomographic data set of differential phase contrast images and the distribution of the partial spatial derivatives of the refractive index in an object. The reconstruction of the refractive index in a plane requires the integration of its gradient field. This work shows how this integration can be efficiently performed by converting the problem to the Poisson equation, which can be accurately solved even in the case of noisy and large datasets. The performance of the suggested method is discussed and demonstrated experimentally by computing the refractive index distribution in both a simple plastic phantom and a complex biological sample. The quality of the reconstruction is evaluated through the direct comparison with other commonly used methods. To this end, the refractive index is retrieved from the same data set using also (1) the filtered backprojection algorithm for gradient projections, and (2) the regularized phase-retrieval procedure. Results show that the gradient vector field approach combined with the developed integration technique provides a very accurate depiction of the sample internal structure. Contrary to the two other techniques, the considered method does not require a preliminary phase-retrieval and can be implemented with any advanced computer tomography algorithm. In this work, analyzer-based phase contrast images are used for demonstration. Results, however, are generally valid and can be applied for processing differential phase-contrast tomographic data sets obtained with other phase-contrast imaging techniques.

  13. Fourier Transform-Plasmon Waveguide Spectroscopy: A Nondestructive Multifrequency Method for Simultaneously Determining Polymer Thickness and Apparent Index of Refraction

    Energy Technology Data Exchange (ETDEWEB)

    Bobbitt, Jonathan M [Ames Laboratory; Weibel, Stephen C [GWC Technologies Inc; Elshobaki, Moneim [Iowa State University; Chaudhary, Sumit [Iowa State University; Smith, Emily A [Ames Laboratory

    2014-12-16

    Fourier transform (FT)-plasmon waveguide resonance (PWR) spectroscopy measures light reflectivity at a waveguide interface as the incident frequency and angle are scanned. Under conditions of total internal reflection, the reflected light intensity is attenuated when the incident frequency and angle satisfy conditions for exciting surface plasmon modes in the metal as well as guided modes within the waveguide. Expanding upon the concept of two-frequency surface plasmon resonance developed by Peterlinz and Georgiadis [ Opt. Commun. 1996, 130, 260], the apparent index of refraction and the thickness of a waveguide can be measured precisely and simultaneously by FT-PWR with an average percent relative error of 0.4%. Measuring reflectivity for a range of frequencies extends the analysis to a wide variety of sample compositions and thicknesses since frequencies with the maximum attenuation can be selected to optimize the analysis. Additionally, the ability to measure reflectivity curves with both p- and s-polarized light provides anisotropic indices of refraction. FT-PWR is demonstrated using polystyrene waveguides of varying thickness, and the validity of FT-PWR measurements are verified by comparing the results to data from profilometry and atomic force microscopy (AFM).

  14. A method for matching the refractive index and kinematic viscosity of a blood analog for flow visualization in hydraulic cardiovascular models.

    Science.gov (United States)

    Nguyen, T T; Biadillah, Y; Mongrain, R; Brunette, J; Tardif, J C; Bertrand, O F

    2004-08-01

    In this work, we propose a simple method to simultaneously match the refractive index and kinematic viscosity of a circulating blood analog in hydraulic models for optical flow measurement techniques (PIV, PMFV, LDA, and LIF). The method is based on the determination of the volumetric proportions and temperature at which two transparent miscible liquids should be mixed to reproduce the targeted fluid characteristics. The temperature dependence models are a linear relation for the refractive index and an Arrhenius relation for the dynamic viscosity of each liquid. Then the dynamic viscosity of the mixture is represented with a Grunberg-Nissan model of type 1. Experimental tests for acrylic and blood viscosity were found to be in very good agreement with the targeted values (measured refractive index of 1.486 and kinematic viscosity of 3.454 milli-m2/s with targeted values of 1.47 and 3.300 milli-m2/s).

  15. Effect of small variations in the refractive index of the ambient medium on the spectrum of a bent fibre-optic Fabry - Perot interferometer

    International Nuclear Information System (INIS)

    Kulchin, Yurii N; Vitrik, O B; Gurbatov, S O

    2011-01-01

    The phase of light propagating through a bent optical fibre is shown to depend on the refractive index of the medium surrounding the fibre cladding when there is resonance coupling between the guided core mode and cladding modes. This shifts the spectral maxima in the bent fibre-optic Fabry - Perot interferometer. The highest phase and spectral sensitivities achieved with this interferometer configuration are 0.71 and 0.077, respectively, and enable changes in the refractive index of the ambient medium down to 5×10 -6 to be detected. This makes the proposed approach potentially attractive for producing highly stable, precision refractive index sensors capable of solving a wide range of liquid refractometry problems.

  16. Effect of small variations in the refractive index of the ambient medium on the spectrum of a bent fibre-optic Fabry - Perot interferometer

    Energy Technology Data Exchange (ETDEWEB)

    Kulchin, Yurii N; Vitrik, O B; Gurbatov, S O [Institute for Automation and Control Processes, Far-Eastern Branch, Russian Academy of Sciences, Vladivostok (Russian Federation)

    2011-09-30

    The phase of light propagating through a bent optical fibre is shown to depend on the refractive index of the medium surrounding the fibre cladding when there is resonance coupling between the guided core mode and cladding modes. This shifts the spectral maxima in the bent fibre-optic Fabry - Perot interferometer. The highest phase and spectral sensitivities achieved with this interferometer configuration are 0.71 and 0.077, respectively, and enable changes in the refractive index of the ambient medium down to 5 Multiplication-Sign 10{sup -6} to be detected. This makes the proposed approach potentially attractive for producing highly stable, precision refractive index sensors capable of solving a wide range of liquid refractometry problems.

  17. Application of "parallel" moiré deflectometry and the single beam Z-scan technique in the measurement of the nonlinear refractive index.

    Science.gov (United States)

    Rasouli, Saifollah; Ghasemi, H; Tavassoly, M T; Khalesifard, H R

    2011-06-01

    In this paper, the application of "parallel" moiré deflectometry in measuring the nonlinear refractive index of materials is reported. In "parallel" moiré deflectometry the grating vectors are parallel, and the resulting moiré fringes are also parallel to the grating lines. Compared to "rotational" moiré deflectometry and the Z-scan technique, which cannot easily determine the moiré fringe's angle of rotation and is sensitive to power fluctuations, respectively, "parallel" moiré deflectometry is more reliable, which allows one to measure the radius of curvature of the light beam by measuring the moiré fringe spacing. The nonlinear refractive index of the sample, including the sense of the change, is obtained from the moiré fringe spacing curve. The method is applied for measuring the nonlinear refractive index of ferrofluids.

  18. Determination of the complex refractive index and optical bandgap of CH3NH3PbI3 thin films

    Science.gov (United States)

    Guerra, J. A.; Tejada, A.; Korte, L.; Kegelmann, L.; Töfflinger, J. A.; Albrecht, S.; Rech, B.; Weingärtner, R.

    2017-05-01

    We report the complex refractive index of methylammonium lead iodide (CH3NH3PbI3) perovskite thin films obtained by means of variable angle spectroscopic ellipsometry and transmittance/reflectance spectrophotometry in the wavelength range of 190 nm to 2500 nm. The film thickness and roughness layer thickness are determined by minimizing a global unbiased estimator in the region where the spectrophotometry and ellipsometry spectra overlap. We then determine the optical bandgap and Urbach energy from the absorption coefficient, by means of a fundamental absorption model based on band fluctuations in direct semiconductors. This model merges both the Urbach tail and the absorption edge regions in a single equation. In this way, we increase the fitting region and extend the conventional ( α ℏ ω ) 2 -plot method to obtain accurate bandgap values.

  19. High-resolution absorption coefficient and refractive index spectra of common pollutant gases at millimeter and THz wavelengths

    Science.gov (United States)

    Almoayed, Nawaf N.; Piyade, Baris C.; Afsar, Mohammed N.

    2007-09-01

    Dispersive Fourier Transform Spectroscopy (DFTS) provides us with a very precise method of measuring the absorption and refractive index spectra of common pollutant gases. This paper presents the rotational transition lines of Sulfur Dioxide and Carbon Monoxide gas as a function of varying pressure using DFTS for the very first time as a combined study. The relationship between the variation of the pressure and the change in the absorption spectrum is examined and discussed in detail. Sulfur Dioxide and Carbon Monoxide gases are highly toxic, pollutant gases that are major contributors to global pollution and can potentially be used as a chemical threat. The relationship between pressure and rotational transmission lines is discussed in detail in the frequency range of 0.3 THz - 0.9 THz. These findings are crucial in characterizing these gases as well as identifying them in a blind test.

  20. Retrieving the aerosol complex refractive index using PyMieScatt: A Mie computational package with visualization capabilities

    Science.gov (United States)

    Sumlin, Benjamin J.; Heinson, William R.; Chakrabarty, Rajan K.

    2018-01-01

    The complex refractive index m = n + ik of a particle is an intrinsic property which cannot be directly measured; it must be inferred from its extrinsic properties such as the scattering and absorption cross-sections. Bohren and Huffman called this approach "describing the dragon from its tracks", since the inversion of Lorenz-Mie theory equations is intractable without the use of computers. This article describes PyMieScatt, an open-source module for Python that contains functionality for solving the inverse problem for complex m using extensive optical and physical properties as input, and calculating regions where valid solutions may exist within the error bounds of laboratory measurements. Additionally, the module has comprehensive capabilities for studying homogeneous and coated single spheres, as well as ensembles of homogeneous spheres with user-defined size distributions, making it a complete tool for studying the optical behavior of spherical particles.

  1. Integrated Mach-Zehnder interferometer on the end facet of multicore fiber for refractive index sensing application

    Science.gov (United States)

    Qi, Yanwen; Zhang, Siyao; Feng, Shengfei; Wang, Xinke; Sun, Wenfeng; Ye, Jiasheng; Han, Peng; Zhang, Yan

    2018-01-01

    A sensitive, real-time seven core optical fiber based Mach-Zehnder interferometer (MZI) sensor for liquid refractive index detection is proposed, fabricated and characterized. A trapezoid body with an inverted wedge shape groove in the center is used to design the MZI. The two ends of the trapezoid body play the roles of micro-prisms, and the middle parts of the trapezoid body and the groove play the roles of reference and sensing arms. A series of performance tests were carried out by immersing the sensor in different kinds of solutions to verify the universal applicability of the sensor. The MZI sensor is as small as only 43 μm × 8 μm, and at the same time with sensitivity of 1616 nm/RIU. Nominally, we realized a completely integrated optical sensing system. And, this system actually could be the building block of more powerful integrated chemical sensing chip for health, security and industry application.

  2. Mach-Zehnder interferometer by utilizing phase modulation of transmitted light through magnetic fluid films possessing tunable refractive index

    International Nuclear Information System (INIS)

    Hong, C.-Y.; Yang, S.Y.; Fang, K.L.; Horng, H.E.; Yang, H.C.

    2006-01-01

    Due to its diverse applications in photonics, bio-sensors, mechanics, etc., Mach-Zehnder interferometer becomes one of important devices. Hence, lots of efforts have been paid to develop advanced Mach-Zehnder interferometers. In this work, we explore new-model Mach-Zehnder interferometer, in which one of arm is consisted of magnetic fluid films. By utilizing the tunable refractive index of magnetic fluid films under external magnetic fields, the traveling phase of a propagating light through the magnetic fluid film is changed. This could lead to a variation in the interfered intensity of the Mach-Zehnder interferometer when an external magnetic field is applied. The modulation in the interfered intensity by the external magnetic field is demonstrated experimentally, and the relevant physical origin is also discussed

  3. A subwavelength metal-grating assisted sensor of Kretschmann style for investigating the sample with high refractive index

    International Nuclear Information System (INIS)

    Li Xu-Feng; Wei Ji-Lin; Peng Wei; Wang Qiao; Zhao Ya-Li

    2016-01-01

    In this paper, a subwavelength metal-grating assisted sensor of Kretschmann style that is capable of detecting the sample with a refractive index higher than that of the substrate is proposed. The sensor configuration is similar to the traditional Kretschmann structure, but the metal film is pattered into a grating. As a TM-polarized laser beam impinges from the substrate, a resonant dip point in reflectance curve is produced at a certain incident angle. Our studies indicate that the sensing sensitivity and resolution are affected by the grating’s gap and period, and after these parameters have been optimized, a sensing sensitivity of 51.484°/RIU is obtained with a slightly changing resolution. (paper)

  4. Fabrication of Radiation Shielding Glasses Based on Lead-free High Refractive Index Glasses Prepared from Local Sand

    International Nuclear Information System (INIS)

    Dararutana, Pisutti; Dutchaneepet, Jirapan; Sirikulrat, Narin

    2007-08-01

    Full text: Lead glasses that show high refractive index are the best know and most popular for radiation shielding. Due to harmful effects of lead and considering the health as well as the environmental issues, lead-free glasses were developed. In this work, content of Chumphon sand was fixed at 40 % (by weight) as a main composition but concentrations of BaCO3 were varied from 6 to 30 % (by weight). It was found that the absorption coefficient of the glass samples containing 30 % BaCO3 was 0.233 cm-1 for Ba-133. The density was also measured. It can be concluded that the prepared lead free glasses offered adequate shielding to gamma radiation in comparison with the lead ones. These glasses were one of the environmental friendly materials

  5. Bidirectional reflectance study on dry, wet, and submerged particulate layers: effects of pore liquid refractive index and translucent particle concentrations.

    Science.gov (United States)

    Zhang, Hao; Voss, Kenneth J

    2006-12-01

    We performed extensive bidirectional reflectance measurements on dry, wet, and submerged particulate layers with various albedos to investigate the darkening effect caused by wetting with fluids. It was found that, in addition to the reduction of the refractive index contrast when there is a pore liquid (wetted), the concentration of translucent grains in a particulate layer and the surface roughness conditions of the individual grains make important contributions to the wetting-induced darkening effect. Reflectance measurements on glass-sediment mixtures confirmed that, as the concentration of translucent particles increases, the reflectance of the dry layers increases while that of the wetted layers decreases. Measurements indicate that neither the prediction made by the theory of Twomey et al. [Appl. Opt. 25, 431 (1986)] nor that of Lekner and Dorf [Appl. Opt. 27, 1278 (1988)] is sufficient.

  6. Plasmon induced transparency and refractive index sensing in a new type of graphene-based plasmonic waveguide

    Science.gov (United States)

    Wu, Di; Tian, Jinping; Li, Lu; Yang, Rongcao

    2018-04-01

    The plasmon induced transparency (PIT) effect is investigated in a graphene-based waveguide, which is composed of a graphene bus waveguide side-coupled with a graphene strip directly and a graphene ring indirectly. Conventional numerical simulations based on finite element method (FEM) are used to study the transmission properties through optimizing the relevant parameters, and it is proved that the simulation results agree well with the analytical results. Then as one of the potential application branches of the PIT-like effect, the property of refractive index sensing with a higher sensitivity of 4160 nm/RIU is further studied. The result can help to deepen the understanding of PIT-like effect and nano sensor, and it would be also beneficial for the studies and applications of nanoscale graphene-based optical devices.

  7. Optical Microbubble Resonators with High Refractive Index Inner Coating for Bio-Sensing Applications: An Analytical Approach

    Directory of Open Access Journals (Sweden)

    Andrea Barucci

    2016-11-01

    Full Text Available The design of Whispering Gallery Mode Resonators (WGMRs used as an optical transducer for biosensing represents the first and crucial step towards the optimization of the final device performance in terms of sensitivity and Limit of Detection (LoD. Here, we propose an analytical method for the design of an optical microbubble resonator (OMBR-based biosensor. In order to enhance the OMBR sensing performance, we consider a polymeric layer of high refractive index as an inner coating for the OMBR. The effect of this layer and other optical/geometrical parameters on the mode field distribution, sensitivity and LoD of the OMBR is assessed and discussed, both for transverse electric (TE and transverse magnetic (TM polarization. The obtained results do provide physical insights for the development of OMBR-based biosensor.

  8. THE MAIN NUTRIENTS CONCENTRATION FROM INTRA TISSUE WATER OF BENTHOS ORAGANISMS FROM MURES BASIN

    Directory of Open Access Journals (Sweden)

    DANA POPA

    2008-05-01

    Full Text Available In the hydrographic basin of Mures river, aboard an altitude gradient, were taken samples of intra tissue waters from benthonic organisms for research the nutrients concentrations. The reference point was represented by a dairy caw farm where the agricultural fields of this is applied the organic fertilization with manure. The intra tissue water samples from benthonic organisms were prelevated in spring and autumn and the prelevate dates are the same with spread manure dates. At the intra tissue water level, concentrations value of N and P are bigger at the second data prelevations than first data prelevations and we can conclude that the benthonic oligochetas activity increase, more than, they density increase in Mures basin. The high concentrations of NH4 show as that Mures basin is a zone characterized by high degree of anoxia and this fact is supported by significant differences between seasonal prelevations. The explication is the manifestation to the cumulated and at distance effects of introduction in water to some organic products, very probably washed from neighborhoods agricultural field. Were calculated values of Student test for seasonal comparisons and were founded significant differences between nutrients concentration values at first and second prelevations.

  9. Theoretical analysis on the refractive-index distribution and bandwidth of gradient-index polymer optical fibers from a centrifugal field.

    Science.gov (United States)

    Wei, Ming-Hsin; Chen, Wen-Chang

    2003-04-20

    Theoretical analysis was applied to analyze the refractive-index distribution (RID) and bandwidth (BW) of gradient-index polymer optical fibers (GI POFs) prepared by a centrifugal field process. The RID of the prepared GI POF could be represented by the equation of n(r) = n1[1 - 2delta(r/alpha)g](1/2). The studied material systems were poly(hexafluoroisopropyl 2-fluoroacrylate) (PHFIP 2-FA)/dibutyl phthalate (DBP) and poly(methyl methacrylate) (PMMA)/benzyl benzoate (BEN). The RID and the BW were significantly affected by an essential parameter k, which was related to thematerial properties (density difference and molecular weight) and processing properties (rotating speed, temperature, and radius). As k increased, the characteristic constant of RID, g, decreased to a minimum and then increased sharply, owing to the separation of the polymer and the dopant. On the other hand, the relative refractive-index difference of RID, delta, increased to a steady value after k increased to a certain value. The variation of RID with k resulted in a local minimum of intermodal dispersion, and thus a maximum bandwidth was obtained. The maximum BW of the PHFIP 2-FA/DBP and PMMA/BEN systems at 1550 nm (100-m fiber length and 2-nm spectral width) for the case of k not equal to 0 were 6.7 and 3.2 Gb/s, respectively. The wavelength of light source affects the BW significantly only at k around zero because of the importance of the intramodal dispersion in this case.

  10. Fano lineshapes of 'Peak-tracking chip' spatial profiles analyzed with correlation analysis for bioarray imaging and refractive index sensing

    KAUST Repository

    Bougot-Robin, K.

    2013-05-22

    The asymmetric Fano resonance lineshapes, resulting from interference between background and a resonant scattering, is archetypal in resonant waveguide grating (RWG) reflectivity. Resonant profile shift resulting from a change of refractive index (from fluid medium or biomolecules at the chip surface) is classically used to perform label-free sensing. Lineshapes are sometimes sampled at discretized “detuning” values to relax instrumental demands, the highest reflectivity element giving a coarse resonance estimate. A finer extraction, needed to increase sensor sensitivity, can be obtained using a correlation approach, correlating the sensed signal to a zero-shifted reference signal. Fabrication process is presented leading to discrete Fano profiles. Our findings are illustrated with resonance profiles from silicon nitride RWGs operated at visible wavelengths. We recently demonstrated that direct imaging multi-assay RWGs sensing may be rendered more reliable using “chirped” RWG chips, by varying a RWG structure parameter. Then, the spatial reflectivity profiles of tracks composed of RWGs units with slowly varying filling factor (thus slowly varying resonance condition) are measured under monochromatic conditions. Extracting the resonance location using spatial Fano profiles allows multiplex refractive index based sensing. Discretization and sensitivity are discussed both through simulation and experiment for different filling factor variation, here Δf=0.0222 and Δf=0.0089. This scheme based on a “Peak-tracking chip” demonstrates a new technique for bioarray imaging using a simpler set-up that maintains high performance with cheap lenses, with down to Δn=2×10-5 RIU sensitivity for the highest sampling of Fano lineshapes. © (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

  11. Aerosol ultraviolet absorption experiment (2002 to 2004), part 2: absorption optical thickness, refractive index, and single scattering albedo

    Science.gov (United States)

    Krotkov, Nickolay A.; Bhartia, Pawan K.; Herman, Jay R.; Slusser, James R.; Scott, Gwendolyn R.; Labow, Gordon J.; Vasilkov, Alexander P.; Eck, Tom; Doubovik, Oleg; Holben, Brent N.

    2005-04-01

    Compared to the visible spectral region, very little is known about aerosol absorption in the UV. Without such information it is impossible to quantify the causes of the observed discrepancy between modeled and measured UV irradiances and photolysis rates. We report results of a 17-month aerosol column absorption monitoring experiment conducted in Greenbelt, Maryland, where the imaginary part of effective refractive index k was inferred from the measurements of direct and diffuse atmospheric transmittances by a UV-multifilter rotating shadowband radiometer [UV-MFRSR, U.S. Department of Agriculture (USDA) UV-B Monitoring and Research Network]. Colocated ancillary measurements of aerosol effective particle size distribution and refractive index in the visible wavelengths [by CIMEL sun-sky radiometers, National Aeronautics and Space Administration (NASA) Aerosol Robotic Network (AERONET)], column ozone, surface pressure, and albedo constrain the forward radiative transfer model input, so that a unique solution for k is obtained independently in each UV-MFRSR spectral channel. Inferred values of k are systematically larger in the UV than in the visible wavelengths. The inferred k values enable calculation of the single scattering albedo ω, which is compared with AERONET inversions in the visible wavelengths. On cloud-free days with high aerosol loadings [τext(440)>0.4], ω is systematically lower at 368 nm (=0.94) than at 440 nm (=0.96), however, the mean ω differences (0.02) are within expected uncertainties of ω retrievals (~0.03). The inferred ω is even lower at shorter UV wavelengths (~=0.92), which might suggest the presence of selectively UV absorbing aerosols. We also find that decreases with decrease in aerosol loading. This could be due to real changes in the average aerosol composition between summer and winter months at the Goddard Space Flight Center (GSFC) site.

  12. Optical modeling of light scattering for refractive-index detection of liquids in a microcapillary with low-coherence rainbow diffractometry

    Science.gov (United States)

    Świrniak, Grzegorz

    2017-09-01

    This work provides a numerical analysis of elastic light scattering by a fused silica capillary for noninvasive sensing of the refractive index for the purposes of capillary electrophoresis (CE). A capillary containing the sample liquid is illuminated by a beam of light of low temporal coherence. The scattering far-field pattern is analyzed in the vicinity of multiple primary rainbows. The paper offers both explanation of the scattering mechanisms contributing to the far-field intensity pattern based on numerical simulations as well as an analysis of the sensitivity of the measurement data to changes in the refractive index.

  13. Modification of the refractive index of dielectrica by means of ionizing radiation; Modifikation des Brechungsindexes von Dielektrika mit Hilfe ionisierender Strahlung

    Energy Technology Data Exchange (ETDEWEB)

    Andreas, B.

    2005-05-01

    Refractive-index changes are studied, which result by interaction of ionizing radiation with dielectric, optically transparent solids. As examples two materials are studied. At the one hand it deals with polymethylmethacrylate (PMMA), a polymer, which is irradiated with synchrotron radiation, and at the other hand with lithium niobate (LiNbO{sub 3}), an oxidic crystal, which is irradiated by fast helium ions. In both materials refractive-index changes in the range 10{sup -4} to 10{sup -3} can be produced, which is very interesting for many applications in photonics.

  14. Optical-CT 3D Dosimetry Using Fresnel Lenses with Minimal Refractive-Index Matching Fluid.

    Directory of Open Access Journals (Sweden)

    Steven Bache

    Full Text Available Telecentric optical computed tomography (optical-CT is a state-of-the-art method for visualizing and quantifying 3-dimensional dose distributions in radiochromic dosimeters. In this work a prototype telecentric system (DFOS-Duke Fresnel Optical-CT Scanner is evaluated which incorporates two substantial design changes: the use of Fresnel lenses (reducing lens costs from $10-30K t0 $1-3K and the use of a 'solid tank' (which reduces noise, and the volume of refractively matched fluid from 1 ltr to 10 cc. The efficacy of DFOS was evaluated by direct comparison against commissioned scanners in our lab. Measured dose distributions from all systems were compared against the predicted dose distributions from a commissioned treatment planning system (TPS. Three treatment plans were investigated including a simple four-field box treatment, a multiple small field delivery, and a complex IMRT treatment. Dosimeters were imaged within 2 h post irradiation, using consistent scanning techniques (360 projections acquired at 1 degree intervals, reconstruction at 2mm. DFOS efficacy was evaluated through inspection of dose line-profiles, and 2D and 3D dose and gamma maps. DFOS/TPS gamma pass rates with 3%/3mm dose difference/distance-to-agreement criteria ranged from 89.3% to 92.2%, compared to from 95.6% to 99.0% obtained with the commissioned system. The 3D gamma pass rate between the commissioned system and DFOS was 98.2%. The typical noise rates in DFOS reconstructions were up to 3%, compared to under 2% for the commissioned system. In conclusion, while the introduction of a solid tank proved advantageous with regards to cost and convenience, further work is required to improve the image quality and dose reconstruction accuracy of the new DFOS optical-CT system.

  15. Enhanced complete photonic bandgap in a moderate refractive index contrast chalcogenide-air system with connected-annular-rods photonic crystals

    KAUST Repository

    Hou, Jin

    2018-03-27

    Connected-annular-rods photonic crystals (CARPCs) in both triangular and square lattices are proposed to enhance the two-dimensional complete photonic bandgap (CPBG) for chalcogenide material systems with moderate refractive index contrast. For the typical chalcogenide-glass–air system with an index contrast of 2.8:1, the optimized square lattice CARPC exhibits a significantly larger normalized CPBG of about 13.50%, though the use of triangular lattice CARPC is unable to enhance the CPBG. It is almost twice as large as our previously reported result [IEEE J. Sel. Top. Quantum Electron. 22, 4900108 (2016) [CrossRef] ]. Moreover, the CPBG of the square-lattice CARPC could remain until an index contrast as low as 2.24:1. The result not only favors wideband CPBG applications for index contrast systems near 2.8:1, but also makes various optical applications that are dependent on CPBG possible for more widely refractive index contrast systems.

  16. Prism coupling technique for characterization of the high refractive index planar waveguides

    Czech Academy of Sciences Publication Activity Database

    Prajzler, V.; Nekvindová, P.; Varga, Marián; Bruncko, J.; Remeš, Zdeněk; Kromka, Alexander

    2016-01-01

    Roč. 18, 11-12 (2016), s. 915-921 ISSN 1454-4164 R&D Projects: GA ČR(CZ) GA14-05053S Institutional support: RVO:68378271 Keywords : high index contrast * optical planar waveguides * zinc oxide * nanocrystalline diamond * gallium nitride Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.449, year: 2016

  17. Simultaneous determination of ordinary and extraordinary refractive index dispersions of nematic liquid crystals in the visible and near-infrared regions from an interference spectrum

    Science.gov (United States)

    Ozaki, Ryotaro; Nishi, Koji; Kan, Takayuki; Kadowaki, Kazunori

    2016-10-01

    An improved interference method is proposed to determine ordinary and extraordinary refractive index dispersions of nematic liquid crystals (LCs). In this method, an LC cell coated with a thin metal layer is used as a Fabry-Perot interferometer, which shows us a sharp transmission fringe. To ensure high reliability, the wavelength dispersion of the refractive index of the metal is taken into account in fitting calculation. In spite of measuring ordinary and extraordinary components, the LC cell, polarizers, and other equipment are not rotated during the experiment. The index evaluation from a single spectrum avoids errors depending on the measurement position owing to non-uniformities of molecular orientation and cell thickness because we can obtain the two indices at exactly the same position. This system can adapt to a wide frequency range and does not require any specific wavelength light source or laser. We demonstrate the determination of ordinary and extraordinary refractive index dispersions of a nematic liquid crystal in the visible and near-infrared regions. Furthermore, we quantitatively reproduce the measured spectrum by calculation using the measured refractive indices.

  18. Measurement of the complex refractive index and complex dielectric permittivity of T.P.S. Space Shuttle tile materials at millimeter wavelengths

    Science.gov (United States)

    Afsar, Mohammed Nurul; Chi, Hua; Li, Xiaohui

    1990-01-01

    Complex refractive index and dielectric permittivity studies of presently used Space Shuttle tile materials at millimeter wavelengths reveal these tiles to exhibit similar absorption characteristics to those of fused silica materials. This absorption is mainly related to the water content in the specimen. A strong birefringence is observed at least in one of these fibrous refractory composite materials.

  19. Refractive index and dispersion control of ultrafast laser inscribed waveguides in gallium lanthanum sulphide for near and mid-infrared applications

    DEFF Research Database (Denmark)

    Demetriou, Giorgos; Berube, Jean-Philippe; Vallee, Real

    2016-01-01

    The powerful ultrafast laser inscription technique is used to fabricate optical waveguides in gallium lanthanum sulphide substrates. For the first time the refractive index profile and the dispersion of such ultrafast laser inscribed waveguides are experimentally measured. In addition the Zero...... in gallium lanthanum sulphide glasses for near and mid-IR applications. (C) 2016 Optical Society of America...

  20. An assessment of some theoretical models used for the calculation of the refractive index of InXGa1-xAs

    Science.gov (United States)

    Engelbrecht, J. A. A.

    2018-04-01

    Theoretical models used for the determination of the refractive index of InXGa1-XAs are reviewed and compared. Attention is drawn to some problems experienced with some of the models. Models also extended to the mid-infrared region of the electromagnetic spectrum. Theoretical results in the mid-infrared region are then compared to previously published experimental results.

  1. Refractive Index of Alkali Halides and Its Wavelength and Temperature Derivatives.

    Science.gov (United States)

    1975-05-01

    LiCl was made for one spectral line, the sodium D line, by Spangenberg [45] in 1923 using the immer- sion method. For molten LiC1, Zarzyski and Naudin ...for one spectral line, the sodium D line, by Spangenberg [45] using the immersion method. For molten LiBr, Zarzyski and Naudin [441 determined the index...infrared region by Randall [511. Zarzyski and Naudin [44] obtained n for molten NaF at the Hg green line at a temperature of 1273 K. After carefully

  2. Determination of the refractive index of insoluble organic extracts from atmospheric aerosol over the visible wavelength range using optical tweezers

    Directory of Open Access Journals (Sweden)

    R. H. Shepherd

    2018-04-01

    Full Text Available Optical trapping combined with Mie spectroscopy is a new technique used to record the refractive index of insoluble organic material extracted from atmospheric aerosol samples over a wide wavelength range. The refractive index of the insoluble organic extracts was shown to follow a Cauchy equation between 460 and 700 nm for organic aerosol extracts collected from urban (London and remote (Antarctica locations. Cauchy coefficients for the remote sample were for the Austral summer and gave the Cauchy coefficients of A  =  1.467 and B  =  1000 nm2 with a real refractive index of 1.489 at a wavelength of 589 nm. Cauchy coefficients for the urban samples varied with season, with extracts collected during summer having Cauchy coefficients of A  =  1.465  ±  0.005 and B  =  4625  ±  1200 nm2 with a representative real refractive index of 1.478 at a wavelength of 589 nm, whilst samples extracted during autumn had larger Cauchy coefficients of A  =  1.505 and B  =  600 nm2 with a representative real refractive index of 1.522 at a wavelength of 589 nm. The refractive index of absorbing aerosol was also recorded. The absorption Ångström exponent was determined for woodsmoke and humic acid aerosol extract. Typical values of the Cauchy coefficient for the woodsmoke aerosol extract were A  =  1.541  ±  0.03 and B  =  14 800  ±  2900 nm2, resulting in a real refractive index of 1.584  ±  0.007 at a wavelength of 589 nm and an absorption Ångström exponent of 8.0. The measured values of refractive index compare well with previous monochromatic or very small wavelength range measurements of refractive index. In general, the real component of the refractive index increases from remote to urban to woodsmoke. A one-dimensional radiative-transfer calculation of the top-of-the-atmosphere albedo was applied to model an atmosphere

  3. Measurement of nonlinear refractive index and ionization rates in air using a wavefront sensor.

    Science.gov (United States)

    Schwarz, Jens; Rambo, Patrick; Kimmel, Mark; Atherton, Briggs

    2012-04-09

    A wavefront sensor has been used to measure the Kerr nonlinear focal shift of a high intensity ultrashort pulse beam in a focusing beam geometry while accounting for the effects of plasma-defocusing. It is shown that plasma-defocusing plays a major role in the nonlinear focusing dynamics and that measurements of Kerr nonlinearity and ionization are coupled. Furthermore, this coupled effect leads to a novel way that measures the laser ionization rates in air under atmospheric conditions as well as Kerr nonlinearity. The measured nonlinear index n₂ compares well with values found in the literature and the measured ionization rates could be successfully benchmarked to the model developed by Perelomov, Popov, and Terentev (PPT model) [Sov. Phys. JETP 50, 1393 (1966)].

  4. Effective refractive index modulation based optical fiber humidity sensor employing etched fiber Bragg grating

    Science.gov (United States)

    Mundendhar, Pathi; Khijwania, Sunil K.

    2015-09-01

    Relative humidity (RH) sensor employing etched fiber Bragg grating (FBG) is reported where RH variations are captured using effective-index-modulation, rather than traditional strain-modulation. Additionly, linear sensor response over wide dynamic range with optimum characteristics is focused. Comprehensive experimental investigation is carried out for the sensor that comprises uniformly etched cladding in the FBG region. Obtained results are observed to be in agreement with the theoretical analysis. Sensor response is observed to be linear over dynamic range 3-94%RH with ~ 0.082 pm/%RH sensitivity, ~0.6%RH resolution, ~ +/-2.5%RH accuracy, ~ +/-0.2 pm average discrepancy and ~ 0.2s response time during humidification/desiccation.

  5. Equivalences between refractive index and equilibrium water content of conventional and silicone hydrogel soft contact lenses from automated and manual refractometry.

    Science.gov (United States)

    González-Méijome, José M; López-Alemany, Antonio; Lira, Madalena; Almeida, José B; Oliveira, M Elisabete C D Real; Parafita, Manuel A

    2007-01-01

    The purpose of the present study was to develop mathematical relationships that allow obtaining equilibrium water content and refractive index of conventional and silicone hydrogel soft contact lenses from refractive index measures obtained with automated refractometry or equilibrium water content measures derived from manual refractometry, respectively. Twelve HEMA-based hydrogels of different hydration and four siloxane-based polymers were assayed. A manual refractometer and a digital refractometer were used. Polynomial models obtained from the sucrose curves of equilibrium water content against refractive index and vice-versa were used either considering the whole range of sucrose concentrations (16-100% equilibrium water content) or a range confined to the equilibrium water content of current soft contact lenses (approximately 20-80% equilibrium water content). Values of equilibrium water content measured with the Atago N-2E and those derived from the refractive index measurement with CLR 12-70 by the applications of sucrose-based models displayed a strong linear correlation (r2 = 0.978). The same correlations were obtained when the models are applied to obtain refractive index values from the Atago N-2E and compared with those (values) given by the CLR 12-70 (r2 = 0.978). No significantly different results are obtained between models derived from the whole range of the sucrose solution or the model limited to the normal range of soft contact lens hydration. Present results will have implications for future experimental and clinical research regarding normal hydration and dehydration experiments with hydrogel polymers, and particularly in the field of contact lenses. 2006 Wiley Periodicals, Inc.

  6. Determination of the structure, morphology and complex refractive index in ZnO-nanopencils/P3HT hybrid structures

    International Nuclear Information System (INIS)

    Motaung, David E.; Malgas, Gerald F.; Arendse, Christopher J.; Mavundla, Sipho E.

    2012-01-01

    Well crystallized flower-shaped ZnO-structures composed of a perfectly hexagonal-shaped ZnO structure were successfully synthesized using a simple microwave assisted hydrothermal method. The NPs with a hexagonal stem and a tapering tip grows out of the base of the flower-shapes. ZnO-NPs were incorporated into the nanomorphology of P3HT and two variations of P3HT:C 60 and P3HT:PCBM blended films in order to facilitate charge separation and transport. Thermo-gravimetric analysis revealed that ZnO-NPs are more stable and are of high purity. A complete PL quenching was demonstrated upon incorporating ZnO-NPs on the surface of P3HT and blended films indicating a charge transfer along the ZnO/P3HT and ZnO/P3HT:fullerenes induced by the aligned nanorods which are working as effective electron collectors by shortening the average electron diffusion distance in the P3HT and fullerenes network. Spectroscopic ellipsometry demonstrated that infiltrating of ZnO-NPs, results in the improved refractive index, extinction coefficient and shifts to lower photon energies. Such shifts can be inferred to the improved light absorption through the waveguide effect from the NPs and an increased interfacial area between the ZnO-NPs and P3HT. An improvement in the mobility and conductivity of P3HT films was observed with an incorporation of ZnO. -- Highlights: ► Flower-shaped ZnO-structures were synthesized via microwave hydrothermal method. ► ZnO-nanopencils were incorporated on the P3HT and blended surface. ► Formation of hexagonal and cone-like structures on the P3HT surface demonstrated an improved morphology. ► The interfacial area and charge transport improved. ► The absorption spectra, refractive index and extinction coefficient shifted to lower photon energies.

  7. Aquaporin 0 plays a pivotal role in refractive index gradient development in mammalian eye lens to prevent spherical aberration

    Energy Technology Data Exchange (ETDEWEB)

    Kumari, S. Sindhu [Physiology and Biophysics, Stony Brook University, Stony Brook, NY (United States); Varadaraj, Kulandaiappan, E-mail: kulandaiappan.varadaraj@stonybrook.edu [Physiology and Biophysics, Stony Brook University, Stony Brook, NY (United States); SUNY Eye Institute, New York, NY (United States)

    2014-10-03

    Highlights: • Intact AQP0 functions as fiber cell-to-fiber cell adhesion protein. • AQP0 facilitates reduction in extracellular space and lens water content. • AQP0 adhesion function aids in lens refractive index gradient (RING) formation. • AQP0 prevents lens spherical aberration by establishing RING. • AQP0 is critical for lens transparency and homeostasis. - Abstract: Aquaporin 0 (AQP0) is a transmembrane channel that constitutes ∼45% of the total membrane protein of the fiber cells in mammalian lens. It is critical for lens transparency and homeostasis as mutations and knockout cause autosomal dominant lens cataract. AQP0 functions as a water channel and as a cell-to-cell adhesion (CTCA) molecule in the lens. Our recent in vitro studies showed that the CTCA function of AQP0 could be crucial to establish lens refractive index gradient (RING). However, there is a lack of in vivo data to corroborate the role of AQP0 as a fiber CTCA molecule which is critical for creating lens RING. The present investigation is undertaken to gather in vivo evidence for the involvement of AQP0 in developing lens RING. Lenses of wild type (WT) mouse, AQP0 knockout (heterozygous, AQP0{sup +/−}) and AQP0 knockout lens transgenically expressing AQP1 (heterozygous AQP0{sup +/−}/AQP1{sup +/−}) mouse models were used for the study. Data on AQP0 protein profile of intact and N- and/or C-terminal cleaved AQP0 in the lens by MALDI-TOF mass spectrometry and SDS–PAGE revealed that outer cortex fiber cells have only intact AQP0 of ∼28 kDa, inner cortical and outer nuclear fiber cells have both intact and cleaved forms, and inner nuclear fiber cells have only cleaved forms (∼26–24 kDa). Knocking out of 50% of AQP0 protein caused light scattering, spherical aberration (SA) and cataract. Restoring the lost fiber cell membrane water permeability (P{sub f}) by transgene AQP1 did not reinstate complete lens transparency and the mouse lenses showed light scattering and SA

  8. Investigating large-scale secondary circulations within impact crater topographies in a refractive index-matched facility

    Science.gov (United States)

    Blois, Gianluca; Kim, Taehoon; Bristow, Nathan; Day, Mackenzie; Kocurek, Gary; Anderson, William; Christensen, Kenneth

    2017-11-01

    Impact craters, common large-scale topographic features on the surface of Mars, are circular depressions delimited by a sharp ridge. A variety of crater fill morphologies exist, suggesting that complex intracrater circulations affect their evolution. Some large craters (diameter >10 km), particularly at mid latitudes on Mars, exhibit a central mound surrounded by circular moat. Foremost among these examples is Gale crater, landing site of NASA's Curiosity rover, since large-scale climatic processes early in in the history of Mars are preserved in the stratigraphic record of the inner mound. Investigating the intracrater flow produced by large scale winds aloft Mars craters is key to a number of important scientific issues including ongoing research on Mars paleo-environmental reconstruction and the planning of future missions (these results must be viewed in conjunction with the affects of radial katabatibc flows, the importance of which is already established in preceding studies). In this work we consider a number of crater shapes inspired by Gale morphology, including idealized craters. Access to the flow field within such geometrically complex topography is achieved herein using a refractive index matched approach. Instantaneous velocity maps, using both planar and volumetric PIV techniques, are presented to elucidate complex three-dimensional flow within the crater. In addition, first- and second-order statistics will be discussed in the context of wind-driven (aeolian) excavation of crater fill.

  9. High refractive index gold nanoparticle doped Bi2O3-B2O3 glasses for THz frequencies

    Science.gov (United States)

    Singla, Shivani; Achanta, Venu Gopal; Mahendru, Nancy; Prabhu, Shriganesh S.; Falconieri, Mauro; Sharma, Gopi

    2017-10-01

    Direct incorporation of gold nanoparticles from suspensions in 30%Bi2O3:70%B2O3 glass was achieved. This method has advantage over traditional methods where a gold salt is added to the precursor mixture and gold nanoparticles are obtained with subsequent heat treatment, eventually inducing crystallization with associated scattering of light and hence resulting in reduced optical quality of material. X-ray diffraction and differential thermal analysis were carried out in order to confirm the amorphous nature of the material and thermal properties of the prepared glasses, respectively. The size of the gold nanoparticles in the prepared glass matrix was measured using scanning electron microscopy. Optical characterization of prepared glass samples in ultraviolet-visible and terahertz regions was performed using ellipsometry, UV-VIS spectrophotometry and THz-time-domain spectroscopy. Comparison was made between glasses with and without gold nanoparticles and the effect of gold nanoparticle concentration on their optical behaviour is studied. These glasses are found to have high refractive index in the THz region making them suitable for photonic applications.

  10. Refractive index effects on the scatter volume location and Doppler velocity estimates of ionospheric HF backscatter echoes

    Directory of Open Access Journals (Sweden)

    P. V. Ponomarenko

    2009-11-01

    Full Text Available Ionospheric E×B plasma drift velocities derived from the Super Dual Auroral Radar Network (SuperDARN Doppler data exhibit systematically smaller (by 20–30% magnitudes than those measured by the Defence Meteorological Satellites Program (DMSP satellites. A part of the disagreement was previously attributed to the change in the E/B ratio due to the altitude difference between the satellite orbit and the location of the effective scatter volume for the radar signals. Another important factor arises from the free-space propagation assumption used in converting the measured Doppler frequency shift into the line-of-sight velocity. In this work, we have applied numerical ray-tracing to identify the location of the effective scattering volume of the ionosphere and to estimate the ionospheric refractive index. The simulations show that the major contribution to the radar echoes should be provided by the Pedersen and/or escaping rays that are scattered in the vicinity of the F-layer maximum. This conclusion is supported by a statistical analysis of the experimental elevation angle data, which have a signature consistent with scattering from the F-region peak. A detailed analysis of the simulations has allowed us to propose a simple velocity correction procedure, which we have successfully tested against the SuperDARN/DMSP comparison data set.

  11. Dual-capillary backscatter interferometry for high-sensitivity nanoliter-volume refractive index detection with density gradient compensation.

    Science.gov (United States)

    Wang, Zhanling; Bornhop, Darryl J

    2005-12-15

    A simple, stable, ultrasensitive dual-capillary dual-bicell (DCDB) microinterferometic backscattering detection (MIBD) system was developed. In DCDB MIBD, a He-Ne laser beam passes through a half-wave plate onto the cross section of two capillaries, one for reference and another for sensing analyte. The position of the backscattered fringe from each capillary, which are in proximity or essentially identical thermal environments, was detected with matched bicell photodetectors. The configuration was found to effectively compensate for thermal drift, which is normally the major source of noise in refractive index (RI) detection systems. It is shown that passive environmental compensation leads to greatly enhanced signal in nanoscale refractometry preformed by MIBD. An order of magnitude improvement in detection limits over single channel configurations is possible. Performance reaches the 10(-9) RIU level for like solvents in the presence in extremely large thermally induced RI gradients. At this level of detectability, DCDB MIBD could facilitate nanoliter-volume, femtomole-level universal detection in applications ranging from mu-HPLC and on-chip CE to scanning microcalorimetry.

  12. High-sensitivity and large-dynamic-range refractive index sensors employing weak composite Fabry-Perot cavities.

    Science.gov (United States)

    Chen, Pengcheng; Shu, Xuewen; Cao, Haoran; Sugden, Kate

    2017-08-15

    Most sensors face a common trade-off between high sensitivity and a large dynamic range. We demonstrate here an all-fiber refractometer based on a dual-cavity Fabry-Perot interferometer (FPI) that possesses the advantage of both high sensitivity and a large dynamic range. Since the two composite cavities have a large cavity length difference, one can observe both fine and coarse fringes, which correspond to the long cavity and the short cavity, respectively. The short-cavity FPI and the use of an intensity demodulation method mean that the individual fine fringe dips correspond to a series of quasi-continuous highly sensitive zones for refractive index measurement. By calculating the parameters of the composite FPI, we find that the range of the ultra-sensitive zones can be considerably adjusted to suit the end requirements. The experimental trends are in good agreement with the theoretical predictions. The co-existence of high sensitivity and a large dynamic range in a composite FPI is of great significance to practical RI measurements.

  13. Integrated dual-tomography for refractive index analysis of free-floating single living cell with isotropic superresolution.

    Science.gov (United States)

    B, Vinoth; Lai, Xin-Ji; Lin, Yu-Chih; Tu, Han-Yen; Cheng, Chau-Jern

    2018-04-13

    Digital holographic microtomography is a promising technique for three-dimensional (3D) measurement of the refractive index (RI) profiles of biological specimens. Measurement of the RI distribution of a free-floating single living cell with an isotropic superresolution had not previously been accomplished. To the best of our knowledge, this is the first study focusing on the development of an integrated dual-tomographic (IDT) imaging system for RI measurement of an unlabelled free-floating single living cell with an isotropic superresolution by combining the spatial frequencies of full-angle specimen rotation with those of beam rotation. A novel 'UFO' (unidentified flying object) like shaped coherent transfer function is obtained. The IDT imaging system does not require any complex image-processing algorithm for 3D reconstruction. The working principle was successfully demonstrated and a 3D RI profile of a single living cell, Candida rugosa, was obtained with an isotropic superresolution. This technology is expected to set a benchmark for free-floating single live sample measurements without labeling or any special sample preparations for the experiments.

  14. Self-referenced refractive index sensing with hybrid-Tamm-plasmon-polariton modes in sub-wavelength analyte layers

    Science.gov (United States)

    Kumar, Samir; Shukla, Mukesh Kumar; Sona Maji, Partha; Das, Ritwick

    2017-09-01

    A coupled Tamm-plasmon-polariton (TPP) hybrid-mode based self-referenced refractive-index sensor is proposed. The geometry is comprised of a sub-wavelength analyte (sensing) layer sandwiched between two metal-clad distributed-Bragg-reflectors (DBRs). Reflection spectrum of the geometry exhibits two discernible reflectivity minima within the photonic-bandgap of DBR. The reflectivity minima are essentially due to excitation of two hybrid modes which have symmetric and anti-symmetric field distribution about the center resulting in an anti-crossing behaviour exhibited by hybrid-TPP mode dispersion curves. The low frequency symmetric mode exhibits strong dispersive properties by virtue of significant presence of mode-field in sensing medium. On the other hand, the high-frequency anti-symmetric mode remains unchanged with alterations in sensing layer. Thus, we propose a self-referenced sensing scheme using hybrid-TPP modes with sensitivity varying from 65~nm~RIU-1 to 180~nm~RIU-1 in the visible band. In addition, the TPP resonance are appreciably sharp as compared to surface-plasmon based geometries which results in improved detection accuracy and figure of merit. We also present an analysis for optimizing the sensor design for enhancing the sensitivity as well as detection accuracy.

  15. Use of weather research and forecasting model outputs to obtain near-surface refractive index structure constant over the ocean.

    Science.gov (United States)

    Qing, Chun; Wu, Xiaoqing; Li, Xuebin; Zhu, Wenyue; Qiao, Chunhong; Rao, Ruizhong; Mei, Haipin

    2016-06-13

    The methods to obtain atmospheric refractive index structure constant (Cn2) by instrument measurement are limited spatially and temporally and they are more difficult and expensive over the ocean. It is useful to forecast Cn2 effectively from Weather Research and Forecasting Model (WRF) outputs. This paper introduces a method that WRF Model is used to forecast the routine meteorological parameters firstly, and then Cn2 is calculated based on these parameters by the Bulk model from the Monin-Obukhov similarity theory (MOST) over the ocean near-surface. The corresponding Cn2 values measured by the micro-thermometer which is placed on the ship are compared with the ones forecasted by WRF model to determine how this method performs. The result shows that the forecasted Cn2 is consistent with the measured Cn2 in trend and the order of magnitude as a whole, as well as the correlation coefficient is up to 77.57%. This method can forecast some essential aspects of Cn2 and almost always captures the correct magnitude of Cn2, which experiences fluctuations of two orders of magnitude. Thus, it seems to be a feasible and meaningful method that using WRF model to forecast near-surface Cn2 value over the ocean.

  16. Simulating the Refractive Index Structure Constant ({C}_{n}^{2}) in the Surface Layer at Antarctica with a Mesoscale Model

    Science.gov (United States)

    Qing, Chun; Wu, Xiaoqing; Li, Xuebin; Tian, Qiguo; Liu, Dong; Rao, Ruizhong; Zhu, Wenyue

    2018-01-01

    In this paper, we introduce an approach wherein the Weather Research and Forecasting (WRF) model is coupled with the bulk aerodynamic method to estimate the surface layer refractive index structure constant (C n 2) above Taishan Station in Antarctica. First, we use the measured meteorological parameters to estimate C n 2 using the bulk aerodynamic method, and second, we use the WRF model output parameters to estimate C n 2 using the bulk aerodynamic method. Finally, the corresponding C n 2 values from the micro-thermometer are compared with the C n 2 values estimated using the WRF model coupled with the bulk aerodynamic method. We analyzed the statistical operators—the bias, root mean square error (RMSE), bias-corrected RMSE (σ), and correlation coefficient (R xy )—in a 20 day data set to assess how this approach performs. In addition, we employ contingency tables to investigate the estimation quality of this approach, which provides complementary key information with respect to the bias, RMSE, σ, and R xy . The quantitative results are encouraging and permit us to confirm the fine performance of this approach. The main conclusions of this study tell us that this approach provides a positive impact on optimizing the observing time in astronomical applications and provides complementary key information for potential astronomical sites.

  17. Study of HfO2/SiO2 dichroic laser mirrors with refractive index inhomogeneity.

    Science.gov (United States)

    Jiao, Hongfei; Cheng, Xinbin; Bao, Ganghua; Han, Jin; Zhang, Jinlong; Wang, Zhanshan; Trubetskov, M; Tikhonravov, Alexander V

    2014-02-01

    HfO2/SiO2 dichroic mirrors, having high reflectance at 1064 nm and high transmittance at 532 nm, play an important role in high-power laser systems. However, the half-wave hole effect, caused mainly by the refractive index inhomogeneity of hafnia, affects the spectra and application of these mirrors. Two approaches to eliminate the half-wave hole effect have been proposed. Both approaches attempt to shift the location of the half-wave hole in comparison with the original wavelength. One approach broadens the reflectance band of the first harmonic wavelength and simultaneously adjusts the central reflectance band to a longer wavelength, whereas the other approach combines the two stacks to adjust the location of the half-wave hole far away from the wavelength of interest. Two kinds of dichroic mirrors have been successfully fabricated; moreover, it was found that the method of a two-stack combination, 0.9(HL)8 and 1.1(HL)8, provides designs that can be fabricated more easily and with better quality spectral characteristics.

  18. Determination of refractive index, extinction coefficient and thickness of thin films by the method of waveguide mode excitation

    Energy Technology Data Exchange (ETDEWEB)

    Sokolov, V I; Marusin, N V; Panchenko, V Ya; Savelyev, A G; Seminogov, V N; Khaydukov, E V [Institute on Laser and Information Technologies, Russian Academy of Sciences, Shatura, Moscow Region (Russian Federation)

    2013-12-31

    We propose a method for measuring simultaneously the refractive index n{sub f}, extinction coefficient m{sub f} and thickness H{sub f} of thin films. The method is based on the resonant excitation of waveguide modes in the film by a TE- or a TM-polarised laser beam in the geometry of frustrated total internal reflection. The values of n{sub f}, m{sub f} and H{sub f} are found by minimising the functional φ = [N{sup -1}Σ{sup N}{sub i=1}(R{sub exp}(θ{sub i}) – R{sub thr}(θ{sub i})){sup 2}]{sup 1/2}, where R{sub exp}(θ{sub i}) and R{sub thr}(θ{sub i}) are the experimental and theoretical coefficients of reflection of the light beam from the interface between the measuring prism and the film at an angle of incidence θ{sub i}. The errors in determining n{sub f}, m{sub f} and H{sub f} by this method are ±2 × 10{sup -4}, ±1 × 10{sup -3} and ±0.5%, respectively. (fiber and integrated optics)

  19. A subwavelength metal-grating assisted sensor of Kretschmann style for investigating the sample with high refractive index

    Science.gov (United States)

    Xu-Feng, Li; Wei, Peng; Ya-Li, Zhao; Qiao, Wang; Ji-Lin, Wei

    2016-03-01

    In this paper, a subwavelength metal-grating assisted sensor of Kretschmann style that is capable of detecting the sample with a refractive index higher than that of the substrate is proposed. The sensor configuration is similar to the traditional Kretschmann structure, but the metal film is pattered into a grating. As a TM-polarized laser beam impinges from the substrate, a resonant dip point in reflectance curve is produced at a certain incident angle. Our studies indicate that the sensing sensitivity and resolution are affected by the grating’s gap and period, and after these parameters have been optimized, a sensing sensitivity of 51.484°/RIU is obtained with a slightly changing resolution. Project supported by the National Natural Science Foundation of China (Grant Nos. 61137005 and 61178067), the Science Foundation of Shanxi Province, China (Grant No. 2013021004-3/2014021021-1), the Pre-studied Project on Weapon Equipment, China (Grant No. 201262401090404), and the Specialized Research Foundation for Doctor of School, China (Grant No. 20122027).

  20. Design of broadband near-infrared reflector using polymer multilayer heterostructure with low-refractive-index contrast

    Science.gov (United States)

    Cheng, Xiang; Yang, Weimin; Lin, Chengyou; Ding, Yumei; Jiao, Zhiwei

    2017-10-01

    In the paper, to achieve total reflection in the short-wavelength near-infrared (NIR) region (780-1100 nm), a broadband NIR reflector using polymer multilayer heterostructure composed of several quarter-wave stacks was proposed. The reflector used two kinds of polymer materials: PMMA and PET with low-refractive-index contrast. Taking the solar power density as the target and the Bragg wavelength of each quarter-wave stack as the variable, a searching method based on arithmetic progression was applied to find the optimal results for broadband NIR reflection. The simulation results show that the broadband NIR reflector can obtain higher total reflectivity with the increase of the number of quarter-wave stacks, and 99.06% total reflectivity in the short-wavelength NIR region can be achieved by the polymer multilayer heterostructure with six quarter-wave stacks. The proposed polymer multilayer heterostructure can be fabricated by the micro-nanomultilayer co-extrusion technology based on torsion lamination, and could be applied in agriculture as NIR-blocking films.

  1. Improving Crystalline Silicon Solar Cell Efficiency Using Graded-Refractive-Index SiON/ZnO Nanostructures

    Directory of Open Access Journals (Sweden)

    Yung-Chun Tu

    2015-01-01

    Full Text Available The fabrication of silicon oxynitride (SiON/ZnO nanotube (NT arrays and their application in improving the energy conversion efficiency (η of crystalline Si-based solar cells (SCs are reported. The SiON/ZnO NT arrays have a graded-refractive-index that varies from 3.5 (Si to 1.9~2.0 (Si3N4 and ZnO to 1.72~1.75 (SiON to 1 (air. Experimental results show that the use of 0.4 μm long ZnO NT arrays coated with a 150 nm thick SiON film increases Δη/η by 39.2% under AM 1.5 G (100 mW/cm2 illumination as compared to that of regular SCs with a Si3N4/micropyramid surface. This enhancement can be attributed to SiON/ZnO NT arrays effectively releasing surface reflection and minimizing Fresnel loss.

  2. Optics-based compressibility parameter for pharmaceutical tablets obtained with the aid of the terahertz refractive index.

    Science.gov (United States)

    Chakraborty, Mousumi; Ridgway, Cathy; Bawuah, Prince; Markl, Daniel; Gane, Patrick A C; Ketolainen, Jarkko; Zeitler, J Axel; Peiponen, Kai-Erik

    2017-06-15

    The objective of this study is to propose a novel optical compressibility parameter for porous pharmaceutical tablets. This parameter is defined with the aid of the effective refractive index of a tablet that is obtained from non-destructive and contactless terahertz (THz) time-delay transmission measurement. The optical compressibility parameter of two training sets of pharmaceutical tablets with a priori known porosity and mass fraction of a drug was investigated. Both pharmaceutical sets were compressed with one of the most commonly used excipients, namely microcrystalline cellulose (MCC) and drug Indomethacin. The optical compressibility clearly correlates with the skeletal bulk modulus determined by mercury porosimetry and the recently proposed terahertz lumped structural parameter calculated from terahertz measurements. This lumped structural parameter can be used to analyse the pattern of arrangement of excipient and drug particles in porous pharmaceutical tablets. Therefore, we propose that the optical compressibility can serve as a quality parameter of a pharmaceutical tablet corresponding with the skeletal bulk modulus of the porous tablet, which is related to structural arrangement of the powder particles in the tablet. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Diode laser heterodyne interferometry for refractive index measurement of small-scale plasmas in high pressure gases

    Science.gov (United States)

    Urabe, Keiichiro; Muneoka, Hitoshi; Stauss, Sven; Terashima, Kazuo

    2013-09-01

    The electron density is one of the most important plasma parameters; however, the behavior of the electron density in high-pressure small-scale plasmas (so-called microplasmas) is still not well understood. We have studied the electron density in direct-current microplasmas operated at atmospheric pressure by using laser heterodyne interferometry and reported some results using CO2 laser as a light source. By measuring the temporal evolutions of the refractive index of the plasmas by the interferometer, the temporal changes of the electron and gas number densities can be derived. Because of its shorter wavelength, using near-infrared diode laser (890 nm) as a light source allows improving the spatial resolution of the measurement over that obtained using a CO2 laser (10.6 μm). Furthermore, by replacing a lock-in amplifier used in our previous CO2-laser interferometry by a custom-made phase detecting module, the response time and temporal resolution of the measurements could be improved. Finally, we discuss potentials of the diode laser interferometry for the measurement of electron and gas number densities with the measurement results of pulsed microplasmas operated in atmospheric and higher pressure gases. This work was supported financially in part by a Grant-in-Aid for Scientific Research on Innovative Areas (No. 21110002) from the Ministry of Education, Culture, Sports, Science, and Technology of Japan.

  4. Fiber refractive index sensor based on dual polarized Mach-Zehnder interference caused by a single-mode fiber loop.

    Science.gov (United States)

    Chen, Lei; Zhang, Wei-Gang; Wang, Li; Zhou, Quan; Sieg, Jonathan; Zhao, De-Long; Wang, Biao; Yan, Tie-Yi; Wang, Song

    2016-01-01

    A novel refractive index (RI) sensor head is proposed and experimentally demonstrated in this paper. The proposed sensor head is composed of a segment of bared single-mode fiber and a fiber holder that is fabricated by a 3D printer. The mechanism of the sensor head is based on dual polarized Mach-Zehnder interference. According to the aforementioned mechanism, we derived that the RI responses of the resonance dips possess an exponential functional manner when the E field is along the fast or slow axes. In addition, based on the finite element method, we found that the resonance dips wavelength responses are more sensitive when the input E field is along the fast axis. A confirmation experiment was performed, and the results confirmed our hypothesis. The maximum arithmetic mean value of RI response is about 657.895  nm/RIU for the proposed sensor head when the ambient RI changes from 1.3350 to 1.4110. Moreover, in the case of the proposed liquid RI sensor head, aligning the E field along the fast axis is the potentially needed condition for polarization.

  5. Precision measurement of refractive index of air based on laser synthetic wavelength interferometry with Edlén equation estimation.

    Science.gov (United States)

    Yan, Liping; Chen, Benyong; Zhang, Enzheng; Zhang, Shihua; Yang, Ye

    2015-08-01

    A novel method for the precision measurement of refractive index of air (n(air)) based on the combining of the laser synthetic wavelength interferometry with the Edlén equation estimation is proposed. First, a n(air_e) is calculated from the modified Edlén equation according to environmental parameters measured by low precision sensors with an uncertainty of 10(-6). Second, a unique integral fringe number N corresponding to n(air) is determined based on the calculated n(air_e). Then, a fractional fringe ε corresponding to n(air) with high accuracy can be obtained according to the principle of fringe subdivision of laser synthetic wavelength interferometry. Finally, high accurate measurement of n(air) is achieved according to the determined fringes N and ε. The merit of the proposed method is that it not only solves the problem of the measurement accuracy of n(air) being limited by the accuracies of environmental sensors, but also avoids adopting complicated vacuum pumping to measure the integral fringe N in the method of conventional laser interferometry. To verify the feasibility of the proposed method, comparison experiments with Edlén equations in short time and in long time were performed. Experimental results show that the measurement accuracy of n(air) is better than 2.5 × 10(-8) in short time tests and 6.2 × 10(-8) in long time tests.

  6. SiO{sub x}N{sub y} thin films with variable refraction index: Microstructural, chemical and mechanical properties

    Energy Technology Data Exchange (ETDEWEB)

    Godinho, V., E-mail: godinho@icmse.csic.es [Instituto de Ciencia de Materiales de Sevilla, Avenida Americo Vespucio 49, 41092 Sevilla (Spain); Universite Libre de Bruxelles, Chemicals and Materials Department, Faculty of Applied Sciences, Avenue F.D. Roosevelt, 50 (CP165/163), 1050 Bruxelles (Belgium); Haro, M.C. Jimenez de [Instituto de Ciencia de Materiales de Sevilla, Avenida Americo Vespucio 49, 41092 Sevilla (Spain); Garcia-Lopez, J. [Centro Nacional de Aceleradores, Parque Tecnologico Cartuja 93, 41092 Sevilla (Spain); Goossens, V.; Terryn, H. [Materials and Chemistry Department, Vrije Universiteit Brussel, Pleinlaan 2, 1050 Brussels (Belgium); Delplancke-Ogletree, M.P. [Universite Libre de Bruxelles, Chemicals and Materials Department, Faculty of Applied Sciences, Avenue F.D. Roosevelt, 50 (CP165/163), 1050 Bruxelles (Belgium); Fernandez, A. [Instituto de Ciencia de Materiales de Sevilla, Avenida Americo Vespucio 49, 41092 Sevilla (Spain)

    2010-05-01

    In this work amorphous silicon oxynitride films with similar composition (ca. Si{sub 0.40}N{sub 0.45}O{sub 0.10}) were deposited by reactive magnetron sputtering from a pure Si target under different N{sub 2}-Ar mixtures. Rutherford backscattering (RBS) studies revealed that the coatings presented similar composition but different density. The mechanical properties evaluated by nanoindentation show also a dependence on the deposition conditions that does not correlate with a change in composition. An increase in nitrogen content in the gas phase results in a decrease of hardness and Young's modulus. The microstructural study by high resolution scanning electron microscopy (SEM-FEG) on non-metalized samples allowed the detection of a close porosity in the form of nano-voids (3-15 nm in size), particularly in the coatings prepared under pure N{sub 2} gas. It has been shown how the presence of the close porosity allows tuning the refraction index of the films in a wide range of values without modifying significantly the chemical, thermal and mechanical stability of the film.

  7. Application of the critical angle method to refractive index measurement of human skin in vivo under partial contact.

    Science.gov (United States)

    Yoshida, Kenichiro; Ohkubo, Kohji; Ojima, Nobutoshi; Iwata, Kayoko

    2013-03-01

    We adapted the critical angle method for measuring rough surfaces under partial contact to acquire an in vivo skin refractive index (RI). Assuming that the total reflection is the simple sum of reflection from areas that are in contact and reflection from those that are not in contact, the RI can be estimated even for partial contact with a rough surface. We found that cheek skin is sufficiently soft that a sufficiently large area can be in contact and that the critical angle was detectable. The RIs of the cheeks of adult females were measured. The RI range was about 1.51 to 1.53, at a wavelength of 550 nm, without considering systematic errors. The RIs of cheeks are significantly correlated with their conductance, which corresponds to their water content. We determined the relationship between the RI and conductance within the variation of skin under normal conditions; this relationship was theoretically obtained in previous studies. In the present study, a direct in vivo measurement method was developed that enabled us to measure the RI in daily life, although this method contains errors for several reasons, including disregarding absorption.

  8. Fiber optic refractive index and magnetic field sensors based on microhole-induced inline Mach-Zehnder interferometers

    Science.gov (United States)

    Chen, Feifei; Jiang, Yi; Zhang, Liuchao; Jiang, Lan; Wang, Sumei

    2018-04-01

    A compact microhole-induced fiber optic inline Mach-Zehnder interferometer (MZI) is demonstrated for measurements of refractive index (RI) and magnetic field. Inline MZIs with different etched diameters, different interaction lengths and different sizes of microholes are fabricated and assessed. The optical transmission spectra of the inline MZIs immersed into a series of liquids are characterized and analysed. Experimental results show that liquid RI sensitivity as high as 539.8436 nm RIU-1 in the RI range of 1.3352-1.4113 RIU is achieved and also exhibits good linearity with a correlation coefficient  >93%. An inline MZI is also fabricated to be a magnetic field sensor by using magnetic fluid material. The experimental results show that this magnetic field sensor has a high sensitivity of  -275.6 pm Oe-1. The inline MZI-based fiber optic sensors possess many advantages, such as small size, simple fabrication, high sensitivity and good linearity, which has a wide application potential in chemical, biological and environmental sensing fields.

  9. Effective tuning of long-period grating refractive-index sensitivity by plasma-deposited diamond-like carbon nano-coatings

    Science.gov (United States)

    Smietana, Mateusz; Bock, Wojtek J.; Mikulic, Predrag; Szmidt, Jan

    2011-05-01

    This work presents an application of radio-frequency plasma-assisted chemical-vapor-deposited (RF PACVD) diamondlike carbon (DLC) nano-coatings for effective tuning of the refractive-index (RI) sensitivity of long-period gratings (LPGs) over a wide range (nD from 1 to 1.47). The technique allows for an efficient deposition of good quality nanofilms as required for optical sensors. The thin overlay effectively changes the distribution of the cladding modes and thus tunes the device's RI sensitivity. We correlated the optical properties of the DLC films with the RI sensitivity of the LPGs. For the developed deposition process parameters, the tuning can be realized simply by varying the length of time taken to deposit the high-refractive-index (n>2 @ λ=1460 nm) DLC film. The advantage of this approach is its speed (the deposition process takes at most 7 minutes) and precision in determining the RI sensitivity of the LPGs.

  10. Vicarious calibration of the solar reflection channels of radiometers onboard satellites through the field campaigns with measurements of refractive index and size distribution of aerosols

    Science.gov (United States)

    Arai, K.

    A comparative study on vicarious calibration for the solar reflection channels of radiometers onboard satellite through the field campaigns between with and without measurements of refractive index and size distribution of aerosols is made. In particular, it is noticed that the influence due to soot from the cars exhaust has to be care about for the test sites near by a heavy trafficked roads. It is found that the 0.1% inclusion of soot induces around 10% vicarious calibration error so that it is better to measure refractive index properly at the test site. It is found that the vicarious calibration coefficients with the field campaigns at the different test site, Ivanpah (near road) and Railroad (distant from road) shows approximately 10% discrepancy. It seems that one of the possible causes for the difference is the influence due to soot from cars exhaust.

  11. Absorption coefficient and refractive index changes of a quantum ring in the presence of spin-orbit couplings: Temperature and Zeeman effects

    Science.gov (United States)

    Zamani, A.; Azargoshasb, T.; Niknam, E.

    2017-10-01

    Effects of applied magnetic field, temperature and dimensions on the optical absorption coefficients (AC) and refractive index (RI) changes of a GaAs quantum ring are investigated in the presence of both Rashba and Dresselhaus spin-orbit interactions (SOI). To this end, the finite difference method (FDM) is used in order to numerically calculate the energy eigenvalues and eigenstates of the system while the compact density matrix approach is hired to calculate the optical properties. It is shown that application of magnetic field, temperature as well as the geometrical size in the presence of spin-orbit interactions, alter the electronic structure and consequently influence the linear and third-order nonlinear optical absorption coefficients as well as the refractive index changes of the system. Results show an obvious blue shift in optical curves with enhancing external magnetic field and temperature while the increment of dimensions result in red shift.

  12. Development and optimization of water treatment reactors using TiO2-modified polymer beads with a refractive index identical to that of water

    Science.gov (United States)

    Myoga, Arata; Iwashita, Ryutaro; Unno, Noriyuki; Satake, Shin-ichi; Taniguchi, Jun; Yuki, Kazuhisa; Seki, Yohji

    2018-03-01

    Various water purification reactors were constructed using beads of TiO2-coated MEXFLON, which is a fluoropolymer exhibiting a refractive index identical to that of water. The performance of these reactors was evaluated in a recirculation experiment utilizing an aqueous solution of methylene blue. Reactor pipes (length = 150 mm, internal diameter = 10 mm) were made of a fluorinated ethylene polymer with a refractive index of 1.338 and contained 206-bead clusters. A UV lamp was used to irradiate eight reactor pipes surrounding it. The above-mentioned eight bead-packed pipes were connected both in series and in parallel, and the performances of these two reactor types were compared. A pseudo-first-order rate constant of 0.70 h- 1 was obtained for the series connection, whereas the corresponding value for the parallel connection was 1.5 times smaller, confirming the effectiveness of increasing the reaction surface by employing a larger number of beads.

  13. Lasing characteristics of refractive-index-matched composite Y3Al5O12 rods employing transparent ceramics for solar-pumped lasers

    Science.gov (United States)

    Hasegawa, Kazuo; Ichikawa, Tadashi; Takeda, Yasuhiko; Ikesue, Akio; Ito, Hiroshi; Motohiro, Tomoyoshi

    2018-04-01

    We have proposed a new configuration of solar-pumped lasers employing transparent ceramic rods. The laser rod has a composite structure consisting of a Nd/Cr:YAG gain domain surrounded by Gd:YAG with the same refractive index as that of Nd/Cr:YAG. The lasing mode is well controlled by the output coupler, and the parasitic oscillation is suppressed, owing to the refractive index matching. A high laser slope efficiency and a low laser oscillation threshold were achieved owing to the suppressed absorption outside the lasing mode, which was previously a serious issue for the end-pumping configuration using a high-NA focusing optics. The laser oscillation threshold of 136 mW and the slope efficiency of 25.3% were derived. Thus, we have resolved the issue of useless absorption associated with the high-NA end-pumping, and achieved significant improvements compared with the conventional structure of uniform Nd/Cr:YAG.

  14. Study of the refractive index change in a-Si:H thin films patterned by 532 nm laser radiation for photovoltaic applications

    Energy Technology Data Exchange (ETDEWEB)

    Colina, M., E-mail: monica.colina.brito@upm.e [Centro Laser UPM, Univ. Politecnica de Madrid, Ctra. de Valencia Km 7.3, 28031 Madrid (Spain); Molpeceres, C.; Holgado, M. [Centro Laser UPM, Univ. Politecnica de Madrid, Ctra. de Valencia Km 7.3, 28031 Madrid (Spain); Gandia, J. [Dept. de Energias Renovables, Energia Solar Fotovoltaica, CIEMAT, Avda, Complutense 22, 28040 Madrid (Spain); Nos, O. [CeRMAE Dept. Fisica Aplicada i Optica, Universitat de Barcelona, Av. Diagonal 647, 08028 Barcelona (Spain); Ocana, J.L. [Centro Laser UPM, Univ. Politecnica de Madrid, Ctra. de Valencia Km 7.3, 28031 Madrid (Spain)

    2010-07-01

    Laser scribing of hydrogenated amorphous silicon (a-Si:H) is a crucial step in the fabrication of thin film photovoltaic modules. During such process, inherent thermo-mechanical effects associated to laser ablation mechanisms lead to thermal damages. In that sense, the state of the material remaining in the vicinity of the ablated area has a critical influence on the electrical properties of the final devices. In this work, a comprehensive analysis of refractive index variations for the material surrounding the ablated area by means of Infrared-Visible Fourier transform spectrometry is proposed. Besides, in order to evaluate the material microstructure, Raman spectroscopy is employed as a complimentary technique. It was seen that the refractive index variation decreased as the distance from the center of the ablated groove was increased. Likewise, a clear transition from highly crystalline to amorphous material could be also observed as a function of the distance from the groove.

  15. Study of the refractive index change in a-Si:H thin films patterned by 532 nm laser radiation for photovoltaic applications

    International Nuclear Information System (INIS)

    Colina, M.; Molpeceres, C.; Holgado, M.; Gandia, J.; Nos, O.; Ocana, J.L.

    2010-01-01

    Laser scribing of hydrogenated amorphous silicon (a-Si:H) is a crucial step in the fabrication of thin film photovoltaic modules. During such process, inherent thermo-mechanical effects associated to laser ablation mechanisms lead to thermal damages. In that sense, the state of the material remaining in the vicinity of the ablated area has a critical influence on the electrical properties of the final devices. In this work, a comprehensive analysis of refractive index variations for the material surrounding the ablated area by means of Infrared-Visible Fourier transform spectrometry is proposed. Besides, in order to evaluate the material microstructure, Raman spectroscopy is employed as a complimentary technique. It was seen that the refractive index variation decreased as the distance from the center of the ablated groove was increased. Likewise, a clear transition from highly crystalline to amorphous material could be also observed as a function of the distance from the groove.

  16. Tailoring of refractive index profiles in LiNbO3 optical waveguides by low-fluence swift-ion irradiation

    International Nuclear Information System (INIS)

    Ruiz, T; Mendez, A; Carrascosa, M; Carnicero, J; GarcIa-Cabanes, A; Olivares, J; Agullo-Lopez, F; GarcIa-Navarro, A; GarcIa, G

    2007-01-01

    Proton-exchange LiNbO 3 planar optical waveguides have been irradiated with swift ions (Cl 30 MeV) at very low fluences in the range 5 x 10 10 -5 x 10 12 cm -2 . Large modifications in the refractive index profiles, and therefore in the optical performance, have been obtained due to the generation of amorphous nano-tracks by the individual ion impacts. Moreover, a fine tuning of the refractive index can be achieved by a suitable control of the fluence (δn/δφ ∼ 10 -14 cm 2 or δn ∼ 10 -5 for δφ = 10 9 cm -2 ). An effective medium approach has been used to account for those changes and determine the amorphous fraction of material. The results have been compared with information extracted from complementary RBS channelling experiments. From the calculated amorphous fractions a radius of ∼2 nm for the amorphous tracks have been estimated

  17. Determination of the complex refractive index segments of turbid sample with multispectral spatially modulated structured light and models approximation

    Science.gov (United States)

    Meitav, Omri; Shaul, Oren; Abookasis, David

    2017-09-01

    Spectral data enabling the derivation of a biological tissue sample's complex refractive index (CRI) can provide a range of valuable information in the clinical and research contexts. Specifically, changes in the CRI reflect alterations in tissue morphology and chemical composition, enabling its use as an optical marker during diagnosis and treatment. In the present work, we report a method for estimating the real and imaginary parts of the CRI of a biological sample using Kramers-Kronig (KK) relations in the spatial frequency domain. In this method, phase-shifted sinusoidal patterns at single high spatial frequency are serially projected onto the sample surface at different near-infrared wavelengths while a camera mounted normal to the sample surface acquires the reflected diffuse light. In the offline analysis pipeline, recorded images at each wavelength are converted to spatial phase maps using KK analysis and are then calibrated against phase-models derived from diffusion approximation. The amplitude of the reflected light, together with phase data, is then introduced into Fresnel equations to resolve both real and imaginary segments of the CRI at each wavelength. The technique was validated in tissue-mimicking phantoms with known optical parameters and in mouse models of ischemic injury and heat stress. Experimental data obtained indicate variations in the CRI among brain tissue suffering from injury. CRI fluctuations correlated with alterations in the scattering and absorption coefficients of the injured tissue are demonstrated. This technique for deriving dynamic changes in the CRI of tissue may be further developed as a clinical diagnostic tool and for biomedical research applications. To the best of our knowledge, this is the first report of the estimation of the spectral CRI of a mouse head following injury obtained in the spatial frequency domain.

  18. The influence of age on the refractive index of the human corneal stroma resected using a mechanical microkeratome.

    Science.gov (United States)

    Patel, Sudi; Alió, Jorge L; Amparo, Francisco; Rodriguez-Prats, Jose Luis

    2011-12-01

    To measure the refractive index (RI) of the human corneal stroma in vivo using an objective Abbé refractometer (VCH-1) and to determine if RI of the stroma is related to age. The VCH-1 was calibrated against a standard subjective Abbé refractometer using 7 randomly selected turbid semiliquid media. VCH-1 was used to measure RI at the central midstroma immediately after lifting the flap in neophyte patients preselected for laser-assisted in situ keratomileusis. Surgical procedures continued as preplanned after measuring the RI; in binocular cases, measurements were taken from the right eye only. Flaps were created using a mechanical microkeratome. The VCH-1 was capable of measuring the RIs of all 7 turbid semiliquid media. The average RMS difference between RI estimates according to the VCH-1 and standard subjective Abbé refractometer was 0.003. The mean RI (± SD) of the stroma was 1.369 (± 0.008; range, 1.356-1.390), and the mean age (± SD) of the subjects was 33.7 years (± 8.86; range, 18-56 years). A significant linear correlation was found between age and RI. Least squares regression lines equating RI with age (x, years) was of the form: RI = 1.35711 + 0.00034x (r = +0.383, n = 36, P = 0.011). RI of the stroma in vivo has a tendency to be increased in older patients when the stroma is resected using a mechanical microkeratome.

  19. Relationship between refractive index and mineral content of enamel and dentin using SS-OCT and TMR

    Science.gov (United States)

    Hariri, Ilnaz; Sadr, Alireza; Shimada, Yasushi; Nakashima, Syozi; Sumi, Yasunori; Tagami, Junji

    2012-01-01

    The aim of this work was to investigate relationship between refractive index (n) and mineral content (MC) (vol %) of enamel and dentin using swept-source optical coherence tomography (SS-OCT) and transverse microradiography (TMR). Enamel and dentin blocks were partitioned into three regions. The middle partition of each sample was covered with a nail polish to protect the sound area during exposure to the treatment solutions. Samples were demineralized in a demineralizing solution, which was refreshed once a week, for 2 months. One window was covered with acid-resistant varnish, leaving the other window exposed; the samples were placed in a solution for remineralization. Samples then were sliced into disks with thickness of 300 μm to 400 μm and placed on metal plate in order to capture cross-sectional images of sound, demineralized and remineralized regions by OCT at 1319 nm center wavelength. The n then was calculated via formula using image analysis software. Following n measurement, these specimens were further polished for the TMR analysis. Correlation between OCT n and TMR MC was examined. A significant and highly positive correlation was found between the measured n and the actual MC at the corresponding locations (Pearson correlation coefficients (r) were 0.94 and 0.97 in enamel and 0.95 and 0.91 in dentin after de-/remineralization process, respectively p < 0.05). OCT showed a potential for quantitative analysis of the mineral loss or gain by measuring of the n in vitro. Supported by the grant from the Japanese Ministry of Education, Global Center of Excellence (GCOE) Program, "International Research Center for Molecular Science in Tooth and Bone Diseases."

  20. Advanced in the Forensic Analysis of Glass Fragments with a Focus on Refractive Index and Elemental Analysis.

    Science.gov (United States)

    Almirall, J R; Trejos, T

    2006-07-01

    Advances in technology provide forensic scientists with better tools to detect, to identify, and to individualize small amounts of trace evidence that have been left at a crime scene. The analysis of glass fragments can be useful in solving cases such as hit and run, burglaries, kidnappings, and bombings. The value of glass as "evidentiary material" lies in its inherent characteristics such as: (a) it is a fragile material that is often broken and hence commonly found in various types of crime scenes, (b) it can be easily transferred from the broken source to the scene, suspect, and/or victim, (c) it is relatively persistent, (d) it is chemically stable, and (e) it has measurable physical and chemical properties that can provide significant evidence of an association between the recovered glass fragments and the source of the broken glass. Forensic scientists have dedicated considerable effort to study and improve the detection and discrimination capabilities of analytical techniques in order to enhance the quality of information obtained from glass fragments. This article serves as a review of the developments in the application of both traditional and novel methods of glass analysis. The greatest progress has been made with respect to the incorporation of automated refractive index measurements and elemental analysis to the analytical scheme. Glass examiners have applied state-of-the-art technology including elemental analysis by sensitive methods such as ICPMS and LA-ICP-MS. A review of the literature regarding transfer, persistence, and interpretation of glass is also presented. Copyright © 2006 Central Police University.

  1. Silica-based optical fibres with refractive-index profiles tailored in a region of 1.46-1.62 for fibre-optic chemical detection

    Czech Academy of Sciences Publication Activity Database

    Kašík, Ivan; Matějec, Vlastimil; Chomát, Miroslav; Hayer, Miloš; Mrázek, Jan; Skokánková, Jana

    2005-01-01

    Roč. 107, č. 1 (2005), s. 93-97 ISSN 0925-4005. [European Conference on Optical Chemical Sensors and Biosensors EUROPT(R)ODE /7./. Madrid, 04.04.2004-07.04.2004] R&D Projects: GA ČR(CZ) GA102/02/0780 Institutional research plan: CEZ:AV0Z20670512 Keywords : optical fibres * optical sensors * refractive index Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 2.646, year: 2005

  2. Observation of applied voltage response of dye-doped liquid crystal by optical measurement of real and imaginary parts of complex refractive index

    Science.gov (United States)

    Sakamoto, Moritsugu; Bannai, Kenta; Noda, Kohei; Sasaki, Tomoyuki; Ono, Hiroshi

    2017-09-01

    The behavior of liquid crystal (LC) molecules and dye molecules in a dye-doped liquid crystal (DDLC) under a voltage application condition was quantitatively investigated. To observe the reorientation of these molecules, the real and imaginary parts of the complex refractive index were simultaneously and individually measured using an optical interferometer. The obtained results indicate that the alignment of dye molecules doped in DDLC occurs following the electrically responding LC molecules, near the Freedericksz transition region of LC.

  3. Develop Roll-to-Roll Manufacturing Process of ZrO2 Nanocrystals/Acrylic Nanocomposites for High Refractive Index Applications

    Energy Technology Data Exchange (ETDEWEB)

    Joshi, Pooran C [ORNL; Compton, Brett G [ORNL; Li, Jianlin [ORNL; Jellison Jr, Gerald Earle [ORNL; Duty, Chad E [ORNL

    2015-04-01

    The purpose of this Cooperative Research and Development Agreement (CRADA) was to develop and evaluate ZrO2/acrylic nanocomposite coatings for integrated optoelectronic applications. The formulations engineered to be compatible with roll-to-roll process were evaluated in terms of optical and dielectric properties. The uniform distribution of the ZrO2 nanocrystals in the polymer matrix resulted in highly tunable refractive index and dielectric response suitable for advanced photonic and electronic device applications.

  4. Angle-resolved spectral Fabry-Pérot interferometer for single-shot measurement of refractive index dispersion over a broadband spectrum

    Science.gov (United States)

    Dong, J. T.; Ji, F.; Xia, H. J.; Liu, Z. J.; Zhang, T. D.; Yang, L.

    2018-01-01

    An angle-resolved spectral Fabry-Pérot interferometer is reported for fast and accurate measurement of the refractive index dispersion of optical materials with parallel plate shape. The light sheet from the wavelength tunable laser is incident on the parallel plate with converging angles. The transmitted interference light for each angle is dispersed and captured by a 2D sensor, in which the rows and the columns are used to simultaneously record the intensities as a function of wavelength and incident angle, respectively. The interferogram, named angle-resolved spectral intensity distribution, is analyzed by fitting the phase information instead of finding the fringe peak locations that present periodic ambiguity. The refractive index dispersion and the physical thickness can be then retrieved from a single-shot interferogram within 18 s. Experimental results of an optical substrate standard indicate that the accuracy of the refractive index dispersion is less than 2.5  ×  10-5 and the relative uncertainty of the thickness is 6  ×  10-5 mm (3σ) due to the high stability and the single-shot measurement of the proposed system.

  5. Three-dimensional particle tracking in concave structures made by ultraviolet nanoimprint via total internal reflection fluorescence microscopy and refractive-index-matching method

    Science.gov (United States)

    Fujinami, Taku; Kigami, Hiroshi; Unno, Noriyuki; Taniguchi, Jun; Satake, Shin-ichi

    2018-03-01

    Total internal reflection fluorescence microscopy (TIRFM) is a promising method for measuring fluid flow close to a wall with nanoscale resolution in a process that is termed "multilayer nanoparticle image velocimetry" (MnPIV). TIRFM uses evanescent light that is generated on a substrate (typically a glass slide) by total internal reflection of light. Many researchers have previously studied x-y-z (3D) flows of water close to flat glass slides using MnPIV. On the other hand, a fluid flow close to a structured surface is also important. To measure flows of water near micro-patterns, we previously developed an MnPIV technique that uses a refractive-index-matching method. In previous study, the micropattern is made of a thermoplastic material with a refractive index that closely matches that of water. In this study, ultraviolet nanoimprint lithography was used for fabricating the appropriate micro-patterns because this technique can fabricate a pattern with a high resolution. As a result, we succeeded in performing MnPIV in water with a circular hole array pattern made by ultraviolet nanoimprint using a refractive-index-matching method. We believe that this technique will be helpful in elucidating fluid flows around microstructures.

  6. Excess molar volume along with viscosity, refractive index and relative permittivity for binary mixtures of exo-tetrahydrodicyclopentadiene with four octane isomers

    International Nuclear Information System (INIS)

    Yue, Lei; Qin, Xiaomei; Wu, Xi; Xu, Li; Guo, Yongsheng; Fang, Wenjun

    2015-01-01

    Highlights: • Binary mixtures of JP-10 with octane isomers are studied as model hydrocarbon fuels. • Density, viscosity, refractive index and relative permittivity are determined. • Excess molar volumes and viscosity deviations are calculated and correlated. - Abstract: The fundamental physical properties including density, viscosity, refractive index and relative permittivity, have been measured for binary mixtures of exo-tetrahydrodicyclopentadiene (JP-10) with four octane isomers (n-octane, 3-methylheptane, 2,4-dimethylhexane and 2,2,4-trimethylpentane) over the whole composition range at temperatures T = (293.15 to 313.15) K and pressure p = 0.1 MPa. The values of excess molar volume (V m E ), viscosity deviation (Δη), refractive index deviation (Δn D ) and relative permittivity deviation (Δε r ) are then calculated. All of the values of V m E and Δη are observed to be negative, while those of Δn D and Δε r are close to zero. The effects of temperature and composition on the variation of V m E values are discussed. The negative values of V m E and Δη are conductive to high-density and low-resistance of fuels, which is favorable for the design and preparation of advanced hydrocarbon fuels

  7. Temperature-Dependent Refractive Index Measurements of Caf2, Suprasil 3001, and S-FTM16 for the Euclid Near Infrared Spectrometer and Photometer

    Science.gov (United States)

    Leviton, Douglas B.; Miller, Kevin H.; Quijada, Manuel A.; Grupp, Frank D.

    2015-01-01

    Using the Cryogenic High Accuracy Refraction Measuring System (CHARMS) at NASA's Goddard Space Flight Center, we measured absolute refractive indices at temperatures from 100 to 310 K at wavelengths from 0.42 to 3.6 microns for CaF2, Suprasil 3001 fused silica, and S-FTM16 glass in support of lens designs for the Near Infrared Spectrometer and Photometer (NISP) for ESA's Euclid dark energy mission. We report absolute refractive index, dispersion (dn/d?), and thermo-optic coefficient (dn/dT) for these materials. In this study, materials from different melts were procured to understand index variability in each material. We provide temperature-dependent Sellmeier coefficients based on our data to allow accurate interpolation of index to other wavelengths and temperatures. For calcium fluoride (CaF2) and S-FTM16, we compare our current measurements with CHARMS measurements of these materials made in the recent past for other programs. We also compare Suprasil 3001's indices to those of other forms of fused silica we have measured in CHARMS.

  8. Control of Fano resonances in photonic crystal nanobeams side-coupled with nanobeam cavities and their applications to refractive index sensing

    Science.gov (United States)

    Meng, Zi-Ming; Li, Zhi-Yuan

    2018-03-01

    We study the control of Fano resonances in a 2D photonic crystal nanobeam (PCN) side-coupled with a photonic crystal nanobeam cavity (PCNC) by choosing different cavity modes, the position of the photonic bandgap of PCNs and the displacement between PCNs and PCNCs. By increasing the refractive index of the holes and the surrounding medium, it is found that the air mode cavity with even mirror-reflection symmetry holds the highest sensitivity (538 nm/RIU RIU, refractive index unit) and maximal figure of merit (FOM  =  516). Our results can be extended to a practical 3D configuration, where an air-suspended silicon PCN is side-coupled with a PCNC. Although the sensitivity is only 192 nm/RIU for our 3D structures, the maximal FOM is as large as 2095 due to the deep transmission valley. The sensitivity of our PCN–PCNC structures can be further improved by designing PCNCs with electric field concentrated in the air region as much as possible. Our PCN–PCNC structures do not require ultrahigh Q and can be fabricated on the silicon-on-insulator platform, which is compatible with CMOS processing. Therefore, our proposed PCN–PCNC structures provide feasible solutions for realizing label-free sensitive integrated refractive index sensors.

  9. Determination of the photoinduced birefringence and of the refractive index by Brewster method of epoxy resin doped with CdS

    Science.gov (United States)

    Silveira, J. B.; Reynoso, V. C. S.; Aquino, H. A.; Carvalho, C. L.

    2012-09-01

    This work describes the synthesis of polymeric composites based on epoxy resin doped with different concentrations of cadmium sulfide (CdS). We studied the photoinduced birefringence and the refractive index by Brewster method as a function of the CdS concentration. UV-Vis spectroscopy was used to determine the absorption bands of the samples. An experimental arrangement to ascertain the photoinduced birefringence used a writing LASER (ion Ar+ of λ = 457 nm) and a reading LASER (He-Ne of λ = 632.8 nm). The results were quantified using the theoretical model purposed by Debye, where it was observed that the pure epoxy resin presented photoinduced birefringence, which increased with the addition of the CdS. Therefore, it was verified that the variation of the power of the writing LASER directly contributes to the amount of photoinduced birefringence. In addition, the behavior of the refractive index of the composite as a function of the addition of CdS was verified by the Brewster angle technique to provide a wavelength of 650 nm using a radiation source with a monochromator. We observed a linear increase in the refractive index with the addition of CdS.

  10. Accurate Molecular Orientation Analysis Using Infrared p-Polarized Multiple-Angle Incidence Resolution Spectrometry (pMAIRS) Considering the Refractive Index of the Thin Film Sample.

    Science.gov (United States)

    Shioya, Nobutaka; Shimoaka, Takafumi; Murdey, Richard; Hasegawa, Takeshi

    2017-06-01

    Infrared (IR) p-polarized multiple-angle incidence resolution spectrometry (pMAIRS) is a powerful tool for analyzing the molecular orientation in an organic thin film. In particular, pMAIRS works powerfully for a thin film with a highly rough surface irrespective of degree of the crystallinity. Recently, the optimal experimental condition has comprehensively been revealed, with which the accuracy of the analytical results has largely been improved. Regardless, some unresolved matters still remain. A structurally isotropic sample, for example, yields different peak intensities in the in-plane and out-of-plane spectra. In the present study, this effect is shown to be due to the refractive index of the sample film and a correction factor has been developed using rigorous theoretical methods. As a result, with the use of the correction factor, organic materials having atypical refractive indices such as perfluoroalkyl compounds ( n = 1.35) and fullerene ( n = 1.83) can be analyzed with high accuracy comparable to a compound having a normal refractive index of approximately 1.55. With this improved technique, we are also ready for discriminating an isotropic structure from an oriented sample having the magic angle of 54.7°.

  11. Experimental measurement of effective refractive index difference for few mode polarization maintaining fibers using S2 method

    Science.gov (United States)

    Guo, Wenting; Li, Yan; Zeng, Xinglin; Mo, Qi; Li, Wei; Liu, Zhijian; Wu, Jian

    2016-10-01

    Polarization maintaining fibers (PMFs) can keep linear polarization state against external perturbations by inducing a high effective refractive index difference (Δneff) along one polarization axis. For few mode polarization maintaining fibers (FM-PMFs), Δneff is applicable between both orthogonal linear polarization modes (e.g. LP01x and LP01y) and orthogonal degenerated modes (e.g. LP11a and LP11b), which can enable advanced functionalities in multiple-input multiple- output-free spatial division multiplexing systems and optical fiber sensing systems. Therefore, the measurement of Δneff for polarization modes and degenerated modes is very important for determining the quality of a FM-PMF. However, measurement of the Δneff for FM-PMFs can be complicated due to the requirement for generating and demultiplexing of the higher order modes (HOMs). In this paper, we propose to measure the Δneff of FM-PMFs using Spatially and Spectrally resolved imaging (S2) method for the first time. The presented method is simply by employing a tunable laser and an IR CCD camera, can avoid any mode converter or mode multiplexer/demultiplexer, featuring a rapid testing speed. A proof-of-concept experiment is carried out to measure FM-PMFs with a length of 1.1m and 5m. The Δneff between the orthogonal polarization modes (i.e. LP11ax-11ay, LP11bx-11by, LP21ax-21ay, and LP21bx-21by) are characterized as 7.05×10-4, 6.91×10-4, 1.02×10-3 and 1.04×10-3 respectively. The Δneff of the orthogonal degenerated modes (i.e. LP11ax-11bx, LP11ay-11by, LP21ax-21bx and LP21ay-21by) are also characterized to be 1.39×10-4, 1.24×10-4, 5.61×10-5 and 6.53×10-5 respectively.

  12. Global scale variability of the mineral dust long-wave refractive index: a new dataset of in situ measurements for climate modeling and remote sensing

    Science.gov (United States)

    Di Biagio, Claudia; Formenti, Paola; Balkanski, Yves; Caponi, Lorenzo; Cazaunau, Mathieu; Pangui, Edouard; Journet, Emilie; Nowak, Sophie; Caquineau, Sandrine; Andreae, Meinrat O.; Kandler, Konrad; Saeed, Thuraya; Piketh, Stuart; Seibert, David; Williams, Earle; Doussin, Jean-François

    2017-02-01

    Modeling the interaction of dust with long-wave (LW) radiation is still a challenge because of the scarcity of information on the complex refractive index of dust from different source regions. In particular, little is known about the variability of the refractive index as a function of the dust mineralogical composition, which depends on the specific emission source, and its size distribution, which is modified during transport. As a consequence, to date, climate models and remote sensing retrievals generally use a spatially invariant and time-constant value for the dust LW refractive index. In this paper, the variability of the mineral dust LW refractive index as a function of its mineralogical composition and size distribution is explored by in situ measurements in a large smog chamber. Mineral dust aerosols were generated from 19 natural soils from 8 regions: northern Africa, the Sahel, eastern Africa and the Middle East, eastern Asia, North and South America, southern Africa, and Australia. Soil samples were selected from a total of 137 available samples in order to represent the diversity of sources from arid and semi-arid areas worldwide and to account for the heterogeneity of the soil composition at the global scale. Aerosol samples generated from soils were re-suspended in the chamber, where their LW extinction spectra (3-15 µm), size distribution, and mineralogical composition were measured. The generated aerosol exhibits a realistic size distribution and mineralogy, including both the sub- and super-micron fractions, and represents in typical atmospheric proportions the main LW-active minerals, such as clays, quartz, and calcite. The complex refractive index of the aerosol is obtained by an optical inversion based upon the measured extinction spectrum and size distribution. Results from the present study show that the imaginary LW refractive index (k) of dust varies greatly both in magnitude and spectral shape from sample to sample, reflecting the

  13. Estimation of the particle size distribution slope with 3 methods: implications for the optical backscattering ratio and the bulk refractive index

    Science.gov (United States)

    Karageorgis, A. P.; Drakopoulos, P. G.; Chaikalis, S.; Spyridakis, N.; Psarra, S.

    2017-09-01

    Within the framework of Perseus and AegeanMarTech projects, multidisciplinary bio-optics experiments were conducted in the optically complex, permanently stratified waters of the NE Aegean Sea. We were able to obtain the particle size distribution (PSD) slope, using different optical sensors: (a) WET Labs ECO-B3B backscattering sensor measuring VSF at three wavelengths (470, 532, and 650 nm); (b) WET Labs C-Star transmissometer (660 nm) and Chelsea ALPHAtracka MKII (470 nm); and (c) Laser In Situ Scattering and Transmissometry - LISST-Deep. Values of the PSD slope estimated by all three methods were found to be within the ranges predicted by Mie theory and the literature. The optical backscattering ratio, bbp, was calculated from bbp(660) and cp(660) and subsequently the bulk index of refraction (np) was estimated as a function of the backscattering ratio and the PSD slope. In July 2014, the values of np varied between 1.01 and >1.24 (mean 1.12+/-0.08), which fall between phytoplankton- and mineral-dominated waters. According to the spatial distribution of np two water layers could be identified, associated with different particle composition: (a) Black Sea water (BSW) and Levantine waters (LW) (from the surface to 65 m depth) that appear to be dominated by material with mean index of refraction 1.13; and (b) the near-bottom layer which exhibited high np, >1.24, the latter attributed to mineral particles with high bulk index of refraction resuspended from the sea floor.

  14. Density, refraction index and vapor–liquid equilibria of N-methyl-2-hydroxyethylammonium butyrate plus (methyl acetate or ethyl acetate or propyl acetate) at several temperatures

    International Nuclear Information System (INIS)

    Alvarez, V.H.; Mattedi, S.; Aznar, M.

    2013-01-01

    Highlights: ► Densities, refraction indices and VLE were measured for ester + m-2-HEAB mixtures. ► V E , apparent molar volumes and thermal expansion coefficients were calculated. ► Peng–Robinson EoS + Wong–Sandler mixing rule + COSMO-SAC predicted the data. -- Abstract: This paper reports the densities, refraction indices, and vapor liquid equilibria for binary systems ester + N-methyl-2-hydroxyethylammonium butyrate (m-2-HEAB): methyl acetate (1) + m-2-HEAB (2), ethyl acetate (1) + m-2-HEAB and propyl acetate (1) + m-2-HEAB (2). The excess molar volumes, deviations in the refraction index, apparent molar volumes, and thermal expansion coefficients for the binary systems were fitted to polynomial equations. The Peng–Robinson equation of state, coupled with the Wong–Sandler mixing rule, is used to describe the experimental data. Since the predictive activity coefficient model COSMO-SAC is used in the Wong–Sandler mixing rule, the resulting thermodynamic model is a completely predictive one. The prediction results for the density and for the vapor–liquid equilibria have a deviation lower than 1.0% and 1.1%, respectively

  15. Fast and Simple Method for Evaluation of Polarization Correction to Propagation Constant of Arbitrary Order Guided Modes in Optical Fibers with Arbitrary Refractive Index Profile

    Directory of Open Access Journals (Sweden)

    Anton Bourdine

    2015-01-01

    Full Text Available This work presents fast and simple method for evaluation of polarization correction to scalar propagation constant of arbitrary order guided modes propagating over weakly guiding optical fibers. Proposed solution is based on earlier on developed modified Gaussian approximation extended for analysis of weakly guiding optical fibers with arbitrary refractive index profile in the core region bounded by single solid outer cladding. Some results are presented that illustrate the decreasing of computational error during the estimation of propagation constant when polarization corrections are taken into account. Analytical expressions for the first and second derivatives of polarization correction are derived and presented.

  16. Brain refractive index measured in vivo with high-NA defocus-corrected full-field OCT and consequences for two-photon microscopy.

    Science.gov (United States)

    Binding, Jonas; Ben Arous, Juliette; Léger, Jean-François; Gigan, Sylvain; Boccara, Claude; Bourdieu, Laurent

    2011-03-14

    Two-photon laser scanning microscopy (2PLSM) is an important tool for in vivo tissue imaging with sub-cellular resolution, but the penetration depth of current systems is potentially limited by sample-induced optical aberrations. To quantify these, we measured the refractive index n' in the somatosensory cortex of 7 rats in vivo using defocus optimization in full-field optical coherence tomography (ff-OCT). We found n' to be independent of imaging depth or rat age. From these measurements, we calculated that two-photon imaging beyond 200 µm into the cortex is limited by spherical aberration, indicating that adaptive optics will improve imaging depth.

  17. Anti-reflective coating for visible light using a silver nanodisc metasurface with a refractive index of less than 1.0

    Science.gov (United States)

    Yasuda, Hideki; Matsuno, Ryo; Koito, Naoki; Hosoda, Hidemasa; Tani, Takeharu; Naya, Masayuki

    2017-12-01

    Suppression of visible-light reflection from material surfaces is an important technology for many applications such as flat-panel displays, camera lenses, and solar panels. In this study, we developed an anti-reflective coating design based on a silver nanodisc metasurface. The effective refractive index of a 10-nm-thick monolayer of silver nanodiscs was less than 1.0, which enabled strong suppression of reflection from the underlying substrate. The nanodisc structure was easy to fabricate using a conventional roll-to-roll wet-coating method. The anti-reflective structure was fabricated over a large area.

  18. Spectro-ellipsometric studies of sputtered amorphous Titanium dioxide thin films: simultaneous determination of refractive index, extinction coefficient, and void distribution

    CERN Document Server

    Lee, S I; Oh, S G

    1999-01-01

    Amorphous titanium dioxide thin films were deposited onto silicon substrates by using RF magnetron sputtering, and the index of refraction, the extinction coefficient, and the void distribution of these films were simultaneously determined from the analyses of there ellipsometric spectra. In particular, our novel strategy, which combines the merits of multi-sample fitting, the dual dispersion function, and grid search, was proven successful in determining optical constants over a wide energy range, including the energy region where the extinction coefficient was large. Moreover, we found that the void distribution was dependent on the deposition conditions, such as the sputtering power, the substrate temperature, and the substrate surface.

  19. Optical trigger: a Cherenkov effect discriminator for high energy physics. Realisation and characterisation of thin films whose refractive index allow discrimination over a wide spectral range

    International Nuclear Information System (INIS)

    Delbart, A.

    1996-01-01

    The first part of this thesis sets the physical principles, and properties of actual Optical Triggers. For each of them, the cupel is sapphire made, and the external medium is liquid because of refractive index. The theory of Cherenkov emitted light cone explain how sapphire birefringence affects discrimination conditions.The second parts of the thesis (the main one) is focussed on study and realization of thin films for Optical Trigger. A layer characterization method has been developed by spectrophotometry, based on Perkin-Elmer laboratory device. Computerized simulation helped us to determine characteristics and limits of the studied device. (D.L.)

  20. Prism-pair interferometry by homodyne interferometers with a common light source for high-accuracy measurement of the absolute refractive index of glasses.

    Science.gov (United States)

    Hori, Yasuaki; Hirai, Akiko; Minoshima, Kaoru

    2011-03-10

    A prism-pair interferometer comprising two homodyne interferometers with a common light source was developed for high-precision measurements of the refractive index of optical glasses with an uncertainty of the order of 10(-6). The two interferometers measure changes in the optical path length in the glass sample and in air, respectively. Uncertainties in the absolute wavelength of the common light source are cancelled out by calculating a ratio between the results from the interferometers. Uncertainties in phase measurement are suppressed by a quadrature detection system. The combined standard uncertainty of the developed system is evaluated as 1.1×10(-6).