International Containment Technology Conference: Proceedings
International Nuclear Information System (INIS)
1997-01-01
This document contains the manuscripts of the papers and posters presented at the 1997 International Containment Technology Conference and Exhibition. These manuscripts represent a valuable compilation of information and data on the environmental challenges and technology-based solutions associated with containment technologies. The purpose of the conference was to promote the advancement of containment technologies by providing a forum from which participants from related disciplines could meet to exchange ideas and information on recent developments. Selected papers were indexed separately for inclusion in the Energy Science and Technology Database
DEFF Research Database (Denmark)
Li, Ying; Wang, Yuandi
2011-01-01
This paper investigates the different impacts of international and domestic technology in-licensing for Chinese firms as licensees on their technological capability building. The evolution of firms in developing countries and development of their technological capabilities has received increasing...... attention in the extant literature on both innovation management and international business. However, little has been done to reach a clear understanding on whether Chinese firms can benefit from international or domestic technology in-licensing and improve their own technological capabilities. This study......, therefore, pursues this endeavor by using a unique dataset from China State of Intellectual Property Office (SIPO) containing information on large Chinese firms. The findings of this empirical study indicate that firms with international technology in-licensing possess stronger technological innovation...
2. International conference on nuclear technologies of XXI centuries. Abstracts
International Nuclear Information System (INIS)
Yakushev, A.P.
2010-01-01
The collection contains abstracts of the II International conference 'Nuclear technologies of the XXI century' on energy problems in the world, the prospects for nuclear power plant in Belarus, the various technological, technical and economic aspects of nuclear safety of NPP and nuclear reactions and international cooperation. The materials published in electronic form.
International Conference on Information and Communication Technology for Intelligent Systems
Das, Swagatam
2016-01-01
This volume contains 60 papers presented at ICTIS 2015: International Conference on Information and Communication Technology for Intelligent Systems. The conference was held during 28th and 29th November, 2015, Ahmedabad, India and organized communally by Venus International College of Technology, Association of Computer Machinery, Ahmedabad Chapter and Supported by Computer Society of India Division IV – Communication and Division V – Education and Research. This volume contains papers mainly focused on ICT and its application for Intelligent Computing, Cloud Storage, Data Mining, Image Processing and Software Analysis etc.
2012-01-01
This book Advances in Technology and Management contains 116 full length papers presented at the International Conference on Technology and Management, held on June 12-13, 2012, Jeju-Island, Korea. The goal of ICTAM 2012 is to bring together researchers working in many different areas of technology and management to foster international collaborations and exchange of new ideas. This volume can be divided into two sections on the basis of the classification of manuscripts considered. The first section deals with technology. The second section of this volume consists of management.
Kommers, Piet, Ed.; Issa, Tomayess, Ed.; Issa, Theodora, Ed.; McKay, Elspeth, Ed.; Isias, Pedro, Ed.
2016-01-01
These proceedings contain the papers and posters of the International Conferences on Internet Technologies & Society (ITS 2016), Educational Technologies (ICEduTech 2016) and Sustainability, Technology and Education (STE 2016), which have been organised by the International Association for Development of the Information Society and…
1st International Conference on Information and Communication Technology for Intelligent Systems
Das, Swagatam
2017-01-01
This volume contains 59 papers presented at ICTIS 2015: International Conference on Information and Communication Technology for Intelligent Systems. The conference was held during 28th and 29th November, 2015, Ahmedabad, India and organized communally by Venus International College of Technology, Association of Computer Machinery, Ahmedabad Chapter and Supported by Computer Society of India Division IV – Communication and Division V – Education and Research. This volume contains papers mainly focused on ICT for Computation, Algorithms and Data Analytics etc.
The application of containment technologies on landfills and contaminated sites in Europe
International Nuclear Information System (INIS)
Melchior, S.
1997-01-01
Remedial action on contaminated sites may include ex-situ or in-situ treatment of contaminants (extraction of solids, liquids and gases or in-situ decontamination) as well as the application of containment technologies. Rumer ampersand Ryan (1995) define containment technology as open-quotes the construction of low-permeability barriers around the source zone [of contaminated sites] to contain contaminants combined with manipulation of hydraulic gradientsclose quotes. The technical focus areas of the 1997 International Containment Technology Conference and Exhibition include vertical, bottom and surface barriers as well as technologies like permeable barriers and stabilization ampersand solidification. Contaminant transport modeling, the test and choice of materials, quality assurance and control, cost and performance criteria, and long-term performance monitoring are integral and essential parts of the technologies and their application. The extent of their use depends on the technology applied as well as on the hazard of the site. This paper will focus on a description of the systems used to construct walls, floors, and caps on European landfills and contaminated sites. The application of walls, floors, and caps, however, is not only a question of the best available technology but also is strongly governed by the priority of the problem to be solved. Therefore this paper will give a short overview on some environmental, socio-economical and political factors, which influence the application of containment technologies, before short profiles of the currently applied technologies will be presented
International Congress on Information and Communication Technology
Bhatt, Yogesh; Joshi, Amit; Mishra, Durgesh
2016-01-01
This volume contains 69 papers presented at ICICT 2015: International Congress on Information and Communication Technology. The conference was held during 9th and 10th October, 2015, Udaipur, India and organized by CSI Udaipur Chapter, Division IV, SIG-WNS, SIG-e-Agriculture in association with ACM Udaipur Professional Chapter, The Institution of Engineers (India), Udaipur Local Centre and Mining Engineers Association of India, Rajasthan Udaipur Chapter. This volume contains papers mainly focused on ICT for Managerial Applications, E-governance, IOT and e-Mining.
Proceedings of the international workshop on spallation materials technology
Energy Technology Data Exchange (ETDEWEB)
Mansur, L.K.; Ullmaier, H. [comps.
1996-10-01
This document contains papers which were presented at the International Workshop on Spallation Materials Technology. Topics included: overviews and thermal response; operational experience; materials experience; target station and component design; particle transport and damage calculations; neutron sources; and compatibility.
Proceedings of the international workshop on spallation materials technology
International Nuclear Information System (INIS)
Mansur, L.K.; Ullmaier, H.
1996-01-01
This document contains papers which were presented at the International Workshop on Spallation Materials Technology. Topics included: overviews and thermal response; operational experience; materials experience; target station and component design; particle transport and damage calculations; neutron sources; and compatibility
Directory of Open Access Journals (Sweden)
Gennady G. Kuvshinov
2012-12-01
Full Text Available The article justifies the perspectives of development of the environmentally sound technology of hydrogen containing fuel mixtures for internal-combustion engines based on the catalytic process of low-temperature decomposition of hydrocarbons into hydrogen and nanofibrous carbon.
Leveraging physical protection technology for international safeguards applications
International Nuclear Information System (INIS)
Glidewell, Don
2001-01-01
Full text: In an effort to improve the effectiveness, efficiency, and reliability of equipment used for International Safeguards, the European Safeguards Research and Development Association (ESARDA) Reflection Group requested the ESARDA Containment and Surveillance Working Group to investigate the feasibility of employing physical protection technologies for international safeguards applications. The physical protection market has traditionally been much greater than the international safeguards market. Consequently, physical protection technology has been subjected to greater testing and evaluation, and has enjoyed much greater real world experience. The larger market yields economies of scale, and the greater testing and experience should arguably result in improved reliability. This paper will compare requirements for physical protection versus international safeguards equipment, and identify types of physical protection equipment, which have potential for safeguards applications. It will evaluate both Commercial Off-the-Shelf (COTS) and non-COTS equipment. Finally, for selected physical protection equipment, the paper will evaluate the degree of modification that would be needed to make it acceptable for safeguards applications. (author)
The international nuclear technology
International Nuclear Information System (INIS)
Remick, F.J.
1992-01-01
With today's technology, isolationism is virtually impossible. The world's economies are so strongly intertwined that what affects one country will, in some way, influence another. Nuclear technology is no exception. If anything, nuclear technology is a catalyst for international cooperation. In the United States of America, nuclear technology is undergoing significant changes. Many of these changes are being greatly influenced by programs of international cooperation
Bally, Gert
1997-01-01
New high-tech developments in the field of optics show increasing applicability not only in classical technological fields but also in the humanities. This book contains selected contributions to an international, interdisciplinary joint conference on "New Technologies in the Humanities" and "Optics Within Life Sciences". Its objective is to forward interdisciplinary information and communication between specialists in optics as well as in medicine, biology, environmental sciences, and cultural heritage. It is unique as a presentation of new optical technologies for cultural heritage protection. The contributions cover international research activities in the areas of archaeological research and new technologies, holography and interferometry, material analysis, laser cleaning, pattern recognition, unconventional microscopy, spectroscopial techniques, and profilometry.
International technology transfer
International Nuclear Information System (INIS)
Kwon, Won Gi
1991-11-01
This book introduces technology progress and economic growth, theoretical consideration of technology transfer, policy and mechanism on technology transfer of a developed country and a developing country, reality of international technology transfer technology transfer and industrial structure in Asia and the pacific region, technology transfer in Russia, China and Eastern Europe, cooperation of science and technology for development of Northeast Asia and strategy of technology transfer of Korea.
International conference on Advances in Engineering Technologies and Physical Science
Ao, Sio-Iong; Rieger, Burghard; IAENG Transactions on Engineering Technologies : Special Edition of the World Congress on Engineering and Computer Science 2011
2013-01-01
This volume contains thirty revised and extended research articles written by prominent researchers participating in an international conference in engineering technologies and physical science and applications. The conference serves as good platforms for the engineering community to meet with each other and to exchange ideas. The conference has also struck a balance between theoretical and application development. The conference is truly international meeting with a high level of participation from many countries. Topics covered include chemical engineering, circuits, communications systems, control theory, engineering mathematics, systems engineering, manufacture engineering, and industrial applications. The book offers the state of art of tremendous advances in engineering technologies and physical science and applications, and also serves as an excellent reference work for researchers and graduate students working with/on engineering technologies and physical science and applications.
Banta, David; Jonsson, Egon; Childs, Paul
2009-07-01
The International Society for Technology Assessment in Health Care (ISTAHC) was formed in 1985. It grew out of the increasing awareness of the international dimensions of health technology assessment (HTA) and the need for new communication methods at the international level. The main function of ISTAHC was to present an annual conference, which gradually grew in size, and also to generally improve in quality from to year. ISTAHC overextended itself financially early in the first decade of the 2000s and had to cease its existence. A new society, Health Technology Assessment international (HTAi), based on many of the same ideas and people, grew up beginning in the year 2003. The two societies have played a large role in making the field of HTA visible to people around the world and providing a forum for discussion on the methods and role of HTA.
1st International Conference on Data Engineering and Communication Technology
Bhateja, Vikrant; Joshi, Amit
2017-01-01
This two-volume book contains research work presented at the First International Conference on Data Engineering and Communication Technology (ICDECT) held during March 10–11, 2016 at Lavasa, Pune, Maharashtra, India. The book discusses recent research technologies and applications in the field of Computer Science, Electrical and Electronics Engineering. The aim of the Proceedings is to provide cutting-edge developments taking place in the field data engineering and communication technologies which will assist the researchers and practitioners from both academia as well as industry to advance their field of study.
International Technology Exchange Division: 1993 Annual report
Energy Technology Data Exchange (ETDEWEB)
1993-12-31
The Office of Technology Development (OTD) was established to ensure that reliable and acceptable technologies are available for implementation at DOE sites and that a technically trained work force is available to complete the EM mission by 2019. OTD established the International Technology Exchange Staff (ITES) to identify, evaluate, and acquire international technologies which can accelerate US DOE cleanup operations. ITES`s goal is to pursue international collaboration among government organizations, educational institutions, and private industry to identify world-wide needs and available technologies that will meet US environmental needs in general, and EM cleanup needs in particular; and establish mechanisms by which US government ER/WM technologies will be transferred to the US private sector for commercialization and export to international markets. ITES has developed the following strategic objectives to implement its international goals: develop and implement EM`s policy for international programs in accordance with DOE and US Government policies and regulations; establish efficient and predictable international technology transfer mechanisms; assist the US private sector in the commercialization and deployment of federally funded EM technologies and related knowledge in international markets; leverage US and non-US resources to accelerate international development and regulatory acceptance of EM technologies; contribute to the improvement of EM`s training of US students, scientists, and managers on international environmental issues. A summary and descriptions of program activities and accomplishments are given for 17 programs which comprise the four main areas of the ITES program: Activities with the Former Soviet Union, International Technology Transfer, International Cooperation, and Information Systems and Publications. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.
International Technology Exchange Division: 1993 Annual report
International Nuclear Information System (INIS)
1993-01-01
The Office of Technology Development (OTD) was established to ensure that reliable and acceptable technologies are available for implementation at DOE sites and that a technically trained work force is available to complete the EM mission by 2019. OTD established the International Technology Exchange Staff (ITES) to identify, evaluate, and acquire international technologies which can accelerate US DOE cleanup operations. ITES's goal is to pursue international collaboration among government organizations, educational institutions, and private industry to identify world-wide needs and available technologies that will meet US environmental needs in general, and EM cleanup needs in particular; and establish mechanisms by which US government ER/WM technologies will be transferred to the US private sector for commercialization and export to international markets. ITES has developed the following strategic objectives to implement its international goals: develop and implement EM's policy for international programs in accordance with DOE and US Government policies and regulations; establish efficient and predictable international technology transfer mechanisms; assist the US private sector in the commercialization and deployment of federally funded EM technologies and related knowledge in international markets; leverage US and non-US resources to accelerate international development and regulatory acceptance of EM technologies; contribute to the improvement of EM's training of US students, scientists, and managers on international environmental issues. A summary and descriptions of program activities and accomplishments are given for 17 programs which comprise the four main areas of the ITES program: Activities with the Former Soviet Union, International Technology Transfer, International Cooperation, and Information Systems and Publications. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database
7th International Conference on Sensing Technology
Mukhopadhyay, Subhas; Jayasundera, Krishanthi
2015-01-01
This book contains a collection of selected works stemming from the 2013 International Conference on Sensing Technology (ICST), which was held in Wellington, New Zealand. The purpose of the book is to distill the highlights of the conference, and therefore track the latest developments in sensing technologies. The book contents are broad, since sensors can be applied in many different areas. Therefore the book gives a broad overview of the latest developments, in addition to discussing the process through which researchers go through in order to develop sensors, or related systems, which will become more widespread in the future.The book is written for academic and industry professionals working in the field of sensing, instrumentation and related fields, and is positioned to give a snapshot of the current state of the art in sensing technology, particularly from the applied perspective.
12th International Conference on Computing and Information Technology
Boonkrong, Sirapat; Unger, Herwig
2016-01-01
This proceedings book presents recent research work and results in the area of communication and information technologies. The chapters of this book contain the main, well-selected and reviewed contributions of scientists who met at the 12th International Conference on Computing and Information Technology (IC2IT) held during 7th - 8th July 2016 in Khon Kaen, Thailand The book is divided into three parts: “User Centric Data Mining and Text Processing”, “Data Mining Algoritms and their Applications” and “Optimization of Complex Networks”.
The 9th international conference on computing and information technology
Unger, Herwig; Boonkrong, Sirapat; IC2IT2013
2013-01-01
This volume contains the papers of the 9th International Conference on Computing and Information Technology (IC2IT 2013) held at King Mongkut's University of Technology North Bangkok (KMUTNB), Bangkok, Thailand, on May 9th-10th, 2013. Traditionally, the conference is organized in conjunction with the National Conference on Computing and Information Technology, one of the leading Thai national events in the area of Computer Science and Engineering. The conference as well as this volume is structured into 3 main tracks on Data Networks/Communication, Data Mining/Machine Learning, and Human Interfaces/Image processing.
Containment/surveillance concepts for international safeguards in reprocessing plants
International Nuclear Information System (INIS)
Bleck, M.E.; Cameron, C.P.; Camp, A.L.
1980-01-01
This paper examines the potential role of advanced containment/surveillance instrumentation systems for international safeguards in reprocessing plants. Several conceptual systems for the surveillance of containment boundary penetrations in a reference reprocessing plant are described and evaluated. The results of the evaluation aid in understanding the potential capabilities and limitations of containment/surveillance as an international safeguards concept in this type of facility
Technology and international climate policy
International Nuclear Information System (INIS)
Clarke, Leon; Calvin, Kate; Edmonds, James A.; Kyle, Page; Wise, Marshall
2009-01-01
Both the nature of international climate policy architectures and the development and diffusion of new energy technologies could dramatically influence future costs of reducing global emissions of greenhouse gases. This paper explores the implications of interactions between technology availability and performance and international policy architectures for technology choice and the social cost of limiting atmospheric CO2 concentrations to 500 ppm by the year 2095. Key issues explored in the paper include the role of bioenergy production with CO2 capture and storage (CCS), overshoot concentration pathways, and the sensitivity of mitigation costs to policy and technology.
Technology and international climate policy
Energy Technology Data Exchange (ETDEWEB)
Clarke, Leon; Calvin, Kate; Edmonds, James A.; Kyle, Page; Wise, Marshall
2009-05-01
Both the nature of international climate policy architectures and the development and diffusion of new energy technologies could dramatically influence future costs of reducing global emissions of greenhouse gases. This paper explores the implications of interactions between technology availability and performance and international policy architectures for technology choice and the social cost of limiting atmospheric CO2 concentrations to 500 ppm by the year 2095. Key issues explored in the paper include the role of bioenergy production with CO2 capture and storage (CCS), overshoot concentration pathways, and the sensitivity of mitigation costs to policy and technology.
Ultimate internal pressure capacity of concrete containment structures
International Nuclear Information System (INIS)
Krishnaswamy, C.N.; Namperumal, R.; Al-Dabbagh, A.
1983-01-01
Lesson learned from the accident at Three-Mile Island nuclear plant has necessitated the computation of the ultimate internal pressure capacity of containment structures as a licensing requirement in the U.S. In general, a containment structure is designed to be essentially elastic under design accident pressure. However, as the containment pressure builds up beyond the design value due to a more severe postulated accident, the containment response turns nonlinear as it sequentially passes through cracking of concrete, yielding of linear plate, yielding of rebar, and yielding of post-tensioning tendon (if the containment concrete is prestressed). This paper reports on the determination of the ultimate internal pressure capacity and nonlinear behavior of typical reinforced and prestressed concrete BWR containments. The probable modes of failure, the criteria for ultimate pressure capacity, and the most critical sections are described. Simple equations to hand-calculate the ultimate pressure capacity and the nonlinear behavior at membrane sections of the containment shell are presented. A nonlinear finite element analysis performed to determine the nonlinear behavior of the entire shell including nonmembrane sections is briefly discribed. The analysis model consisted of laminated axisymmetric shell finite elements with nonlinear stress-strain properties for each material. Results presented for typical BWR concrete containments include nonlinear response plots of internal pressure versus containment deflection and strains in the liner, rebar, and post-tensioning tendons at the most stressed section in the shell. Leak-tightness of the containment liner and the effect of thermal loads on the ultimate capacity are discussed. (orig.)
Cordeiro, J.; van Sinderen, Marten J.; Shishkov, Boris
This volume contains the proceedings of the Second International Workshop on Enterprise Systems and Technology (I-WEST 2008), held on May 23 in Enschede, The Netherlands. The I-WEST workshop is a scientific event of IICREST, the Interdisciplinary Institute for Collaboration and Research on
International Conference on Informatics and Communication Technologies for Societal Developmen
Bhojan, Anand; Peter, J
2015-01-01
This volume comprises research papers presented at the International Conference on Informatics and Communication Technologies for Societal Development (ICICTS 2014) held at Karunya University, India. The content focuses on the recent advancements in image or signal processing, computer vision, communication technologies, soft computing, advanced computing, data mining, and knowledge discovery. The primary objective of this volume is to facilitate advancement and application of the knowledge and to promote ideas that solve problems faced by society through cutting-edge technologies. The chapters contain selected articles from academicians, researchers, and industry experts in the form of frameworks, models, and architectures. Practical approaches, observations, and results of research that promotes societal development are also incorporated. This volume will serve as a useful compendium for interested readers and researchers working towards societal development from the technological perspective.
PREFACE: Fourth International Symposium on Atomic Technology
Okada, Shigefumi
2010-04-01
The International Symposium on Atomic Technology (ISAT) is held every year. The 4th Symposium (ISAT-4) was held on November 18-19, 2009 at the Seaside Hotel MAIKO VILLA KOBE, Kobe City, Japan presided by the "Atomic Technology Project". The ISAT-4 symposium was intended to offer a forum for the discussion on the latest progress in the atomic technologies. The symposium was attended by 107 delegates. There were 10 invited and 6 oral presentations. The number of poster presentations was 69. From all the contributions, 22 papers selected through review process are contained in this volume. The "Atomic Technology Project" was started in 2006 as a joint project of three institutions; (1) the Center for Atomic and Molecular Technologies, Graduate School of Engineering, Osaka University (CAMT), (2) the Tsukuba Research Center for Interdisciplinary Materials Science, Graduate School of Pure and Applied Sciences, University of Tsukuba (TIMS) and (3) the Polyscale Technology Research Center, Research Institute for Science and Technology, Tokyo University of Science (PTRC), each of which were independently pursuing nano-technologies and was developing atomic scale operation and diagnostics, functional materials, micro processing and device. The project is funded by the Ministry of Education, Culture, Sports, Science and Technology of Japan. The goal of the project is to contribute to the development of atomic-scale science and technologies such as functional molecules, biomaterials, and quantum functions of atomic-scale structures. Shigefumi Okada Conference Chair Center for Atomic and Molecular Technologies, Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita-city, Osaka 565-0871, Japan. Conference photograph Kobe photograph
International Nuclear Information System (INIS)
Schultheiss, G.F.
1981-01-01
In the frame of R + D-work for BWR-pressure suppression systems the GKSS-Forschungszentrum Geesthacht GmbH organized an international specialist meeting. All important safety relevant aspects of pressure suppression system technology have been included. About 60 experts from USA, Japan, Sweden, Italy, Netherlands and the Federal Republic of Germany participated. They came from licensing authorities, vendors, research centers and universities. In 24 papers they have shown the world-wide present status of theoretical and experimental know-how on pressure suppression system behaviour. In discussions and working groups recommendations for future work have been compiled. (orig.) [de
International Nuclear Information System (INIS)
Schultheiss, G.F.
1981-01-01
In the frame of R + D-work for BWR-pressure suppression systems the GKSS-Forschungszentrum Geesthacht GmbH organized an international specialist meeting. All important safety relevant aspects of pressure suppression system technology have been included. About 60 experts from USA, Japan, Sweden, Italy, Netherland and the Federal Republic of Germany participated. They came from licensing authorities, vendors, research centers and universities. In 24 papers they have shown the world-wide present status of theoretical and experimental know-how on pressure suppression system behaviour. In discussions and working groups recommendations for future work have been compiled. (orig.) [de
International Journal of Engineering, Science and Technology ...
African Journals Online (AJOL)
International Journal of Engineering, Science and Technology: About this journal. Journal Home > International Journal of Engineering, Science and Technology: About this journal. Log in or Register to get access to full text downloads.
International Journal of Engineering, Science and Technology ...
African Journals Online (AJOL)
International Journal of Engineering, Science and Technology: Journal Sponsorship. Journal Home > About the Journal > International Journal of Engineering, Science and Technology: Journal Sponsorship. Log in or Register to get access to full text downloads.
Proceedings of 18th international conference on structural mechanics in reactor technology
International Nuclear Information System (INIS)
2005-07-01
The 18th International Conference on Structural Mechanics in Reactor Technology was held on August 7-12, 2005 in Beijing, China, and Sponsored by International Association for Structural Mechanics in Reactor Technology, Chinese Nuclear Society, Chinese Society of Theoretical and Applied Mechanics, and Tsinghua University. 486 abstracts are Collected. The contents includes: opening, plenary and keynote presentations; computational mechanics; fuel and core structures; aging, life extension, and license renewal; design methods and rules for components; fracture mechanics; concrete material, containment and other structures; analysis and design for dynamic and extreme loads; seismic analysis, design and qualification; structural reliability and probabilistic safety assessment (PSA); operation, inspection and maintenance; severe accident management and structural evaluation; advanced reactors and generation IV reactors; decommissioning of nuclear facilities and waste management.
Kommers, Piet, Ed.; Issa, Tomayess, Ed.; Isaias, Pedro, Ed.; Hol, Ana, Ed.
2017-01-01
These proceedings contain the papers and posters of the 5th International Conference on Educational Technologies 2017 (ICEduTech 2017), which has been organised by the International Association for Development of the Information Society and co-organised by the Western Sydney University, held in Sydney, Australia, 11-13 December 2017. ICEduTech is…
Maintenance technologies for reactor internals
Energy Technology Data Exchange (ETDEWEB)
Sato, Kenji [Nuclear Energy Systems and Services Div., Toshiba Corp., Tokyo (Japan); Kobayashi, Masahiro [Toshiba Corp., Yokohama (Japan). Keihin Product Operations; Sano, Yuji; Kimura, Seiichiro [Power and Industrial Systems Research and Development Center, Toshiba Corp., Tokyo(Japan)
2000-10-01
Toshiba places the highest priority on maintenance technologies for the reactor pressure vessel (RPV) and its internals in operating nuclear power plants. This paper summarizes the status of applied laser maintenance technologies, both preventive and repair. For laser peeing and laser desensitization treatment (LDT) technologies in particular, field applications are also described in detail. In the future, the area of field applications for preventive maintenance, repair, and inspection technologies will be further expanded. (author)
Kumar, Ashok; Annamalai, Annamalai
2013-01-01
This book is the proceedings of Third International Conference on Computational Science, Engineering and Information Technology (CCSEIT-2013) that was held in Konya, Turkey, on June 7-9. CCSEIT-2013 provided an excellent international forum for sharing knowledge and results in theory, methodology and applications of computational science, engineering and information technology. This book contains research results, projects, survey work and industrial experiences representing significant advances in the field. The different contributions collected in this book cover five main areas: algorithms, data structures and applications; wireless and mobile networks; computer networks and communications; natural language processing and information theory; cryptography and information security.
The convertible client/server technology in large container inspection system
International Nuclear Information System (INIS)
Chen Zhiqiang; Zhang Li; Gao Wenhuan; Kang Kejun
2001-01-01
The author presents a new convertible client/server technology in distributed networking environment of a large container inspection system. The characteristic and advantage of this technology is introduced. The authors illustrate the policy of the technology to develop the networking program, and provide one example about how to program the software in large container inspection system using the new technology
Modelling the Transport Process in Marine Container Technology
Directory of Open Access Journals (Sweden)
Serđo Kos
2003-01-01
Full Text Available The paper introduces a mathematical problem that occursin marine container technology when programming the transportof a beforehand established number of ISO containers effectedby a full container ship from several ports of departure toseveral ports of destination at the minimum distance (time innavigation or at minimum transport costs. The application ofthe proposed model may have an effect on cost reduction incontainer transport thereby improving the operation process inmarine transport technology. The model has been tested by usinga numerical example with real data. In particular, it describesthe application of the dual variables in the analysis ofoptimum solution.
In Situ Remediation Integrated Program: Evaluation and assessment of containment technology
International Nuclear Information System (INIS)
Gerber, M.A.; Fayer, M.J.
1994-06-01
Containment technology refers to a broad range of methods that are used to contain waste or contaminated groundwater and to keep uncontaminated water from entering a waste site. The U.S. Department of Energy's (DOE) Office of Technology Development has instituted the In Situ Remediation Integrated Program (ISRIP) to advance the state-of-the-art of innovative technologies that contain or treat, in situ, contaminated media such as soil and groundwater, to the point of demonstration and to broaden the applicability of these technologies to the widely varying site remediation requirements throughout the DOE complex. The information provided here is an overview of the state-of-the-art of containment technology and includes a discussion of ongoing development projects; identifies the technical gaps; discusses the priorities for resolution of the technical gaps; and identifies the site parameters affecting the application of a specific containment method. The containment technology described in this document cover surface caps; vertical barriers such as slurry walls, grout curtains, sheet pilings, frozen soil barriers, and vitrified barriers; horizontal barriers; sorbent barriers; and gravel layers/curtains. Within DOE, containment technology could be used to prevent water infiltration into buried waste; to provide for long-term containment of pits, trenches, and buried waste sites; for the interim containment of leaking underground storage tanks and piping; for the removal of contaminants from groundwater to prevent contamination from migrating off-site; and as an interim measure to prevent the further migration of contamination during the application of an in situ treatment technology such as soil flushing. The ultimate goal is the implementation of containment technology at DOE sites as a cost-effective, efficient, and safe choice for environmental remediation and restoration activities
International survey on gas technology organizations
International Nuclear Information System (INIS)
1994-11-01
The International Survey on Gas Technology Organizations has been prepared by the IEA International Centre for Gas Technology Information. 172 companies and R and D Institutions from 41 countries have contributed to the survey. The objective of the Survey is to develop an overview of identified organizations active in the development of new gas technology. As a quick reference guide the survey offers you short descriptions of a number of the most important organizations within gas technology on a world wide basis. Many R and D institutions around the world are working with topics of relevance to the gas industry. New gas technology draws on many different scientific and technical disciplines. This first issue of the survey includes only a part of the numerous organizations and institutions active within the development of new technology of relevance to the gas industry. The preparation of this survey has been a first step in the development of the information activities of the Centre. The information regarding organizations with R and D activities of relevance to the gas industry will continuously be expanded and updated for internal use in the Centre and will also be available to external users. The Centre plans to establish on-line access to these update versions during 1995. (EG)
Program Integration for International Technology Exchange
International Nuclear Information System (INIS)
Rea, J.L.
1993-01-01
Sandia National Laboratories (SNL), Albuquerque, New Mexico, supports the International Technology Exchange Division (ITED) through the integration of all international activities conducted within the DOE's Office of Environmental Management (EM)
Energy, environment and technological innovation: Rome 2nd international congress
International Nuclear Information System (INIS)
1992-01-01
From the three volumes containing the proceedings of the October 12-16, 1992 2nd International Congress on Energy, Environment and Technological Innovation held at the University of Rome 'La Sapienza', separate abstracts were prepared for 41 papers. The selection of papers included recent developments and research trends in the following high-tech areas: biomass plantations, wind turbines, photovoltaic power plants, solar architecture, building energy management, global warming, automobile air pollution abatement, district heating with cogeneration, and hydrogen fuels for transportation
2017-01-01
This book contains the proceedings of the 10th International Joint Conference on Biomedical Engineering Systems and Technologies (BIOSTEC 2017). This conference is sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC), in cooperation with the ACM
2010-10-01
... and vehicles with certain electronic equipment when transported by aircraft or vessel. When an... vehicles, mechanical equipment containing internal combustion engines, and battery powered vehicles or... Than Class 1 and Class 7 § 173.220 Internal combustion engines, self-propelled vehicles, mechanical...
International Journal of Engineering, Science and Technology: Site ...
African Journals Online (AJOL)
International Journal of Engineering, Science and Technology: Site Map. Journal Home > About the Journal > International Journal of Engineering, Science and Technology: Site Map. Log in or Register to get access to full text downloads.
International Nuclear Information System (INIS)
Smartt, H.; Kuhn, M.; Krementz, D.
2015-01-01
The U.S. National Nuclear Security Administration (NNSA) Office of Non-proliferation and Verification Research and Development currently funds research on advanced containment technologies to support Continuity of Knowledge (CoK) objectives for verification regimes. One effort in this area is the Advanced Tools for Maintaining Continuity of Knowledge (ATCK) project. Recognizing that CoK assurances must withstand potential threats from sophisticated adversaries, and that containment options must therefore keep pace with technology advances, the NNSA research and development on advanced containment tools is an important investment. The two ATCK efforts underway at present address the technical containment requirements for securing access points (loop seals) and protecting defined volumes. Multiple U.S. national laboratories are supporting this project: Sandia National Laboratories (SNL), Savannah River National Laboratory (SRNL), and Oak Ridge National Laboratory (ORNL). SNL and SRNL are developing the ''Ceramic Seal,'' an active loop seal that integrates multiple advanced security capabilities and improved efficiency housed within a small-volume ceramic body. The development includes an associated handheld reader and interface software. Currently at the prototype stage, the Ceramic Seal will undergo a series of tests to determine operational readiness. It will be field tested in a representative verification trial in 2016. ORNL is developing the Whole Volume Containment Seal (WCS), a flexible conductive fabric capable of enclosing various sizes and shapes of monitored items. The WCS includes a distributed impedance measurement system for imaging the fabric surface area and passive tamper-indicating features such as permanent-staining conductive ink. With the expected technology advances from the Ceramic Seal and WCS, the ATCK project takes significant steps in advancing containment technologies to help maintain CoK for various verification
The use of technology in international collaboration
DEFF Research Database (Denmark)
Livonen, Mirja; Sonnenwald, Diane H.
2000-01-01
International collaboration is emerging as an essential function for organizations, playing an important role in organizational strategy, performance and knowledge management. Two case studies of international collaboration are discussed in this paper. Participants' perceptions and use...... of technology to collaborate are examined from the perspective of sense of presence, participation, task type, productivity and ease of use. The data suggest that technology compatibility with cultural and work style preferences and technology infrastructure is more important than media richness, in contrast...
Review of containment vent filter technology
International Nuclear Information System (INIS)
Kovach, J.L.
1989-01-01
The technology applied for the design and construction of containment vent filters is compiled and reviewed. The national positions leading to the selection of venting or method of filtration are extracted from position papers. Several areas of further information needs are identified
Computer simulation study International Container Terminal "Tanjung Perak", Surabaya, Indonesia
Groenveld, R.; Wanders, S.
1998-01-01
The Tanjung Perak harbour of the city of Surabaya on the island Java, Indonesia has experienced a considerable growth of container traffic. In order to adequately deal with the expected continuing increase of container traffic in the future, the International container terminal is presently being
International Center for Gas Technology Information
International Nuclear Information System (INIS)
Gad, L.H.
1993-01-01
Based on an acknowledgement of the growing importance of natural gas, a number of European countries, USA, Japan and the Russian Federation have worked together in order to establish a common center of information on natural gas technology under the auspices of the International Energy Agency. Centers were to be established in Washington and in Denmark. The centers will concern themselves with establishing an international information center for gas technology, effecting natural gas technology transfer between global regions, carrying out analytical studies on the energy market and the development of technology within the field of natural gas. The structure of the decision-making processes that will be employed is explained in addition to the organization and economy. The centers should build up a global information network between the relevant countries, their gas companies, institutions etc. (AB)
An analysis of the impact of emerging technology on organisations’ internal controls
2013-01-01
M.Comm. (Computer Auditing) This study presents an evaluation of emerging information communication technology (ICT) solutions to the security internal control systems in South African organisations. Information systems have enabled companies to communicate more efficiently, gain competitive advantage and get a larger market share. These information systems therefore need to be protected securely as they are the vehicles and containers for critical information assets in decision-making pro...
International Nuclear Information System (INIS)
Banford, Anthony; Edwards, Jeremy; Demmer, Rick; Rankin, Richard; Hastings, Jeremy
2013-01-01
International collaboration and partnerships have become a reality as markets continue to globalize. This is the case in nuclear sector where over recent years partnerships commonly form to bid for capital projects internationally in the increasingly contractorized world and international consortia regularly bid and lead Management and Operations (M and O) / Parent Body Organization (PBO) site management contracts. International collaboration can also benefit research and technology development. The Idaho National Laboratory (INL) and the UK National Nuclear Laboratory (NNL) are internationally recognized organizations delivering leading science and technology development programmes both nationally and internationally. The Laboratories are actively collaborating in several areas with benefits to both the laboratories and their customers. Recent collaborations have focused on fuel cycle separations, systems engineering supporting waste management and decommissioning, the use of misting for decontamination and in-situ waste characterisation. This paper focuses on a case study illustrating how integration of two technologies developed on different sides of the Atlantic are being integrated through international collaboration to address real decommissioning challenges using fogging technology. (authors)
Energy Technology Data Exchange (ETDEWEB)
Banford, Anthony; Edwards, Jeremy [National Nuclear Laboratory, 5th Floor Chadwick House, Birchwood Park, Warrington WA3 6AE(United Kingdom); Demmer, Rick; Rankin, Richard [Idaho National Laboratory, Idaho Falls, ID 83401(United States); Hastings, Jeremy [National Nuclear Laboratory, Central Laboratory Sellafield, Seascale, Cumbria CA20 1PG (United Kingdom)
2013-07-01
International collaboration and partnerships have become a reality as markets continue to globalize. This is the case in nuclear sector where over recent years partnerships commonly form to bid for capital projects internationally in the increasingly contractorized world and international consortia regularly bid and lead Management and Operations (M and O) / Parent Body Organization (PBO) site management contracts. International collaboration can also benefit research and technology development. The Idaho National Laboratory (INL) and the UK National Nuclear Laboratory (NNL) are internationally recognized organizations delivering leading science and technology development programmes both nationally and internationally. The Laboratories are actively collaborating in several areas with benefits to both the laboratories and their customers. Recent collaborations have focused on fuel cycle separations, systems engineering supporting waste management and decommissioning, the use of misting for decontamination and in-situ waste characterisation. This paper focuses on a case study illustrating how integration of two technologies developed on different sides of the Atlantic are being integrated through international collaboration to address real decommissioning challenges using fogging technology. (authors)
International Collaboration Patterns and Effecting Factors of Emerging Technologies
Bai, Xu; Liu, Yun
2016-01-01
With the globalization of the world economy, international innovation collaboration has taken place all over the world. This study selects three emerging technologies (3D printing, big data and carbon nanotubes and graphene technology) among 20 countries as the research objects, using three patent-based indicators and network relationship analysis to reflect international collaboration patterns. Then we integrate empirical analyses to show effecting factors of international collaboration degrees by using panel data. The results indicate that while 3D printing technology is associated with a “balanced collaboration” mode, big data technology is more accurately described by a radial pattern, centered on the United States, and carbon nanotubes and graphene technology exhibits “small-world” characteristics in this respect. It also shows that the factors GDP per capita (GPC), R&D expenditure (RDE) and the export of global trade value (ETV) negatively affect the level of international collaboration. It could be useful for China and other developing countries to make international scientific and technological collaboration strategies and policies in the future. PMID:27911926
International Collaboration Patterns and Effecting Factors of Emerging Technologies.
Directory of Open Access Journals (Sweden)
Xu Bai
Full Text Available With the globalization of the world economy, international innovation collaboration has taken place all over the world. This study selects three emerging technologies (3D printing, big data and carbon nanotubes and graphene technology among 20 countries as the research objects, using three patent-based indicators and network relationship analysis to reflect international collaboration patterns. Then we integrate empirical analyses to show effecting factors of international collaboration degrees by using panel data. The results indicate that while 3D printing technology is associated with a "balanced collaboration" mode, big data technology is more accurately described by a radial pattern, centered on the United States, and carbon nanotubes and graphene technology exhibits "small-world" characteristics in this respect. It also shows that the factors GDP per capita (GPC, R&D expenditure (RDE and the export of global trade value (ETV negatively affect the level of international collaboration. It could be useful for China and other developing countries to make international scientific and technological collaboration strategies and policies in the future.
Energy Technology Data Exchange (ETDEWEB)
Philibert, C. [Energy and Environment Division, International Energy Agency IEA, Paris (France)
2004-07-01
Mitigating climate change and achieving stabilisation of greenhouse gas atmospheric concentrations will require deep reductions in global emissions of energy-related carbon dioxide emissions. Developing and disseminating new, low-carbon energy technology will thus be needed. Two previous AIXG papers have focused on possible drivers for such a profound technological change: Technology Innovation, Development and Diffusion, released in June 2003, and International Energy Technology Collaboration and Climate Change Mitigation, released in June 2004. The first of these papers assesses a broad range of technical options for reducing energy-related CO2 emissions. It examines how technologies evolve and the role of research and development efforts, alternative policies, and short-term investment decisions in making long-term options available. It considers various policy tools that may induce technological change, some very specific, and others with broader expected effects. Its overall conclusion is that policies specifically designed to promote technical change, or 'technology push', could play a critical role in making available and affordable new energy technologies. However, such policies would not be sufficient to achieve the Convention's objective in the absence of broader policies. First, because there is a large potential for cuts that could be achieved in the short run with existing technologies; and second, the development of new technologies requires a market pull as much as a technology push. The second paper considers the potential advantages and disadvantages of international energy technology collaboration and transfer for promoting technological change. Advantages of collaboration may consist of lowering R and D costs and stimulating other countries to invest in R and D; disadvantage may include free-riding and the inefficiency of reaching agreement between many actors. This paper sets the context for further discussion on the role of
How Do Science and Technology Affect International Affairs?
Weiss, Charles
2015-01-01
Science and technology influence international affairs by many different mechanisms. Both create new issues, risks and uncertainties. Advances in science alert the international community to new issues and risks. New technological capabilities transform war, diplomacy, commerce, intelligence, and investment. This paper identifies six basic…
International Nuclear Information System (INIS)
Pickett, Chris A.; Tolk, Keith M.; Keel, Frances; LaMontagne, Steve
2010-01-01
The Institute of Nuclear Materials Management (INMM) held an International Workshop on 'Containment and Surveillance: Concepts for the 21st Century' on June 6-11, 2010 at the Oak National Laboratory in Oak Ridge, Tennessee. The National Nuclear Security Administration Offices of Non-proliferation Research and Development and Office of Nuclear Safeguards sponsored the event. The workshop focused on determining concepts and needs for 21st century containment and surveillance (C/S) systems that support International Atomic Energy Agency safeguards and future arms control agreements. Panel discussions from subject matter experts and international practitioners provided the daily topical theme of the following areas of C/S: authentication, tagging, sealing, containment verification, and surveillance systems. Each panel discussion was followed with a question and answer session with the audience and an afternoon breakout session. The facilitated breakout sessions were used to compile and determine future needs. Individuals attending the workshop included C/S experts and practitioners; IAEA and arms control inspectors, technology providers, vendors, students and individuals with an interest in or desire to learn about future C/S system needs. The primary goal for the workshop was to produce a document that details the future research and development needs for C/S systems that support nuclear safeguards and arms control missions. This paper will present a compilation of the information obtained from breakout sessions at the workshop. (author)
Wilt, David M.
2004-01-01
The testing of new technologies aboard the International Space Station (ISS) is facilitated through the use of a passive experiment container, or PEC, developed at the NASA Langley Research Center. The PEC is an aluminum suitcase approximately 2 ft square and 5 in. thick. Inside the PEC are mounted Materials International Space Station Experiment (MISSE) plates that contain the test articles. The PEC is carried to the ISS aboard the space shuttle or a Russian resupply vehicle, where astronauts attach it to a handrail on the outer surface of the ISS and deploy the PEC, which is to say the suitcase is opened 180 deg. Typically, the PEC is left in this position for approximately 1 year, at which point astronauts close the PEC and it is returned to Earth. In the past, the PECs have contained passive experiments, principally designed to characterize the durability of materials subjected to the ultraviolet radiation and atomic oxygen present at the ISS orbit. The MISSE5 experiment is intended to characterize state-of-art (SOA) and beyond photovoltaic technologies.
Application and study of advanced network technology in large container inspection system
International Nuclear Information System (INIS)
Li Zheng; Kang Kejun; Gao Wenhuan; Wang Jingjin
1996-01-01
Large Container Inspection System (LCIS) based on radiation imaging technology is a powerful tool for the customs to check the contents inside a large container without opening it. An image distributed network system is composed of center manager station, image acquisition station, environment control station, inspection processing station, check-in station, check-out station, database station by using advanced network technology. Mass data, such as container image data, container general information, manifest scanning data, commands and status, must be on-line transferred between different stations. Advanced network technology and software programming technique are presented
ISO: international standards development for nuclear technology
International Nuclear Information System (INIS)
Becker, K.
1981-01-01
The importance of internationally recognized standards for nuclear technology and safety is rapidly increasing for technical as well as economical and political reasons such as public acceptance and nuclear technology transfer to developing countries. The need for such standards is also evident because of the large number of nuclear installations sited close to international borders, and the export of nuclear installations from relatively few supplier countries to a large number of user countries. It is the purpose of this report to describe briefly the history, organizational structures and procedures, goals, accomplishments, problems, and future needs of the relevant activities of the International Organization for Standardization (ISO). ISO is composed of the partly governmental, partly non-governmental national standards bodies of 86 countries including China. The work of its Technical Committee (TC) 85 'Nuclear Energy' is mostly concerned with industrial applications, contractual aspects and international communication, for the benefit of both developed and developing countries. It works in close liaison with IAEA, which develops Codes and Guides addressed mainly to the regulatory aspects of nuclear power plants in developing countries. ISO/TC 85 has four sub-committees dealing with: (a) Terminology, Definitions, Units and Symbols (Secretariat USA, four working groups (WGs)); (b) Radiation Protection (Secretariat France, ten WGs); (c) Power Reactor Technology (Secretariat Sweden, nine WGs); (d) Nuclear Fuel Technology (Secretariat F.R. Germany, seven WGs). (author)
International Nuclear Information System (INIS)
Zeuch, W.R.; Wang, C.Y.
1985-01-01
This paper discusses the effects of complex internals on the containment response of large LMFBRs during energetic accidents. Results of a series of analyses with the ALICE-II code demonstrate quantitative structural and hydrodynamic effects from parametric variation of reactor internal designs. Effects of various upper internal structure treatments, structural stiffness of the upper internal structure and core support structure, and the location and dimensions of internal components are examined. Results indicate that reduction of primary containment loads can be accomplished through such means as confinement of the core region and avoiding over-strengthened, rigid internals. A study of the beneficial and adverse parameters involved in primary containment response should be helpful in optimizing designs for safety purposes
Failure internal pressure of spherical steel containments
International Nuclear Information System (INIS)
Sanchez Sarmiento, G.
1985-01-01
An application of the British CEGB's R6 Failure Assessment Approach to the determination of failure internal pressure of nuclear power plant spherical steel containments is presented. The presence of hypothetical cracks both in the base metal and in the welding material of the containment, with geometrical idealizations according to the ASME Boiler and Pressure Vessel Code (Section XI), was taken into account in order to analyze the sensitivity of the failure assessment with the values of the material fracture properties. Calculations of the elastoplastic collapse load have been performed by means of the Finite Element System SAMCEF. The clean axisymmetric shell (neglecting the influence of nozzles and minor irregularities) and two major penetrations (personnel and emergency locks) have been taken separately into account. Large-strain elastoplastic behaviour of the material was considered in the Code, using lower bounds of true stress-true strain relations obtained by testing a collection of tensile specimens. Assuming the presence of cracks in non-perturbed regions, the reserve factor for test pressure and the failure internal pressure have been determined as a function of the flaw depth. (orig.)
Development of safety enhancement technology of containment building
International Nuclear Information System (INIS)
Seo, Jeong Moon; Choun, Y. S.; Choi, I. K.
2002-04-01
This study consists of four research areas, (1) Seismic safety assessment, (2) Aging assessment of a containment building, (3) Prediction of long-term behavior and analysis of a containment building, (4) Performance verification of a containment building. In the seismic safety assessment area, responses of a containment building were monitored and the analysis method was verified. Also performed are the identification of earthquake characteristics and improvement of the seismic fragility analysis method. In the area of aging assessment of a containment building, we developed aging management code SLMS and database. Aging tests were performed for containment building materials and aging models were developed. Techniques for investigation, detection, and evaluation of aging were developed. In the area of prediction of long-term behavior and analysis of a containment building, we developed a non-linear structural analysis code NUCAS and material models. In the area of performance verification of a containment building, we analyzed the crack behavior of a containment wall and the behavior of the containment under internal pressure. We also improved the ISI methods for prestressed containment
13th International Conference on Information Technology
2016-01-01
This book collects articles presented at the 13th International Conference on Information Technology- New Generations, April, 2016, in Las Vegas, NV USA. It includes over 100 chapters on critical areas of IT including Web Technology, Communications, Security, and Data Mining.
Report of the international symposium for ITER. 'Burning plasma science and technology on ITER'
International Nuclear Information System (INIS)
2002-10-01
This report contains the presentations on the International Symposium for ITER, held on Jan. 24, 2002 on the occasion of the ITER Governmental Negotiations in Tokyo. This symposium is organized by Japan Atomic Energy Research Institute with the support of the Ministry of Education, Culture, Sports, Science and Technology (MEXT). The meaningful results were obtained through this symposium especially on new frontiers of science and technology brought by ITER, accelerated road maps towards realizing fusion energy, and portfolio of other fusion configurations from ITER. The 5 of the presented papers are indexed individually (J.P.N.)
International Nuclear Information System (INIS)
Song Chenning; Hou Gangling; Zhou Guoliang
2014-01-01
Ultimate compressive bearing capacity, influenced factors and its rules of nuclear RC containment are key problems of safety assessment, accident treatment and structure design, etc. Ultimate compressive bearing capacity of nuclear RC containment is shown by concrete damaged plasticity model and steel double liner model of ABAQUS. The study shows that the concrete of nuclear RC containment cylinder wall becomes plastic when the internal pressure is up to 0.87 MPa, the maximum tensile strain of steel liner exceeds 3000 × 10 6 and nuclear RC containment reaches ultimate status when the internal pressure is up to 1.02 MPa. The result shows that nuclear RC containment is in elastic condition under the design internal pressure and the bearing capacity meets requirement. Prestress and steel liner play key parts in the ultimate internal pressure and failure mode of nuclear RC containment. The study results have value for the analysis of ultimate compressive bearing capacity, structure design and safety assessment. (authors)
Space Technology and Applications International Forum -1999. Proceedings
International Nuclear Information System (INIS)
El-Genk, M.S.
1999-01-01
These proceedings represent papers presented at the 1999 Space Technology and Applications International Forum (STAIF-99). This is a large conference in terms of the number of hosted technical sessions and the technical papers presented. This year's theme, ''Opportunities and Challenges for the New Millenium,'' covered a broad spectrum of topics in space science and technology that spans the range from basic research, such as thermophysics in microgravity and breakthrough propulsion physics, to the most recent advances in space power and propulsion, space exploration and commercialization, next generation launch systems, and the international effort to deploy and assemble the international space station. STAIF-99 was co-sponsored by the United States Department of Energy. The two-volume proceedings includes 253 articles, out of which 28 have been abstracted for the Energy,Science and Technology database
Report on container technology for the ATLAS TDAQ system
Gadirov, Hamid
2016-01-01
My summer student project "Container technology for the Upgrade of the ATLAS Trigger and Data Acquisition (TDAQ) system" focused on the research of container-based (operating system-level) virtualization for TDAQ software. Several tests were performed on Docker platform, all of them showed compatibility for TDAQ software.
Drivers of international performance of Brazilian technology-based firms
Directory of Open Access Journals (Sweden)
Maria Carolina Serpa Fagundes de Oliveira
2018-01-01
Full Text Available For Technology-Based Firms, international expansion represents an opportunity for growth and value creation. The present study was designed to analyze the role of technology-based companies (TBCs internationalization drivers on international performance. Therefore, a descriptive research was carried out with a quantitative approach performed through a survey. Data collection happened with 53 Brazilian TBCs located in innovation habitats. These data were analyzed by multivariate statistical technique. The results showed that the determinants of the international performance of Brazilian TBCs, can be set by external influencers (localization in innovation habitats, integration into global productive chains, partnerships and strategic alliances for innovation and government policies and internal influencers (innovation capability, international market orientation and international marketing skills.
Economics and technology in international law
International Nuclear Information System (INIS)
1982-01-01
This volume presents the main address, the lectures and the discussions of the symposium. The papers presented to the symposium were the following: the Draft Convention on the Law of the Sea and problems of the international deep seabed regime; developments in science and technology, as a challenge to international law; modern fishery engineering and its impact on international law; the EEC agricultural market - a case study of European Law; problems of international law in connection with a new system of the world economy; the GATT and a new world economic system; the Third World and UNCTAD; international disaster relief and mutual assistance in case of accidents, especially with a view to Atomic Energy Law; organisation, scope and limits of international co-operation in the peaceful use of nuclear energy. (HSCH) [de
Importance of international standards on hydrogen technologies
International Nuclear Information System (INIS)
Bose, T.K.; Gingras, S.
2001-01-01
This presentation provided some basic information regarding standards and the International Organization for Standardization (ISO). It also explained the importance of standardization activities, particularly ISO/TC 197 which applies to hydrogen technologies. Standards are established by consensus. They define the minimum requirements that will ensure that products and services are reliable and effective. Standards contribute to the elimination of technical barriers to trade (TBT). The harmonization of standards around the world is desirable in a free trade environment. The influence of the TBT on international standardization was discussed with particular reference to the objectives of ISO/TC 197 hydrogen technologies. One of the priorities for ISO/TC 197 is a hydrogen fuel infrastructure which includes refuelling stations, fuelling connectors, and storage technologies for gaseous and liquid hydrogen. Other priorities include an agreement between the International Electrotechnical Commission (IEC) and the ISO, in particular the IEC/TC 105 and ISO/TC 197 for the development of fuel cell standards. The international standards that have been published thus far include ISO 13984:1999 for liquid hydrogen, land vehicle fuelling system interface, and ISO 14687:1999 for hydrogen fuel product specification. Standards are currently under development for: liquid hydrogen; airport hydrogen fuelling facilities; gaseous hydrogen blends; basic considerations for the safety of hydrogen systems; gaseous hydrogen and hydrogen blends; and gaseous hydrogen for land vehicle filling connectors. It was concluded that the widespread use of hydrogen is dependent on international standardization
Evaluation of CANDU NPP containment structure subjected to aging and internal pressure increase
Energy Technology Data Exchange (ETDEWEB)
Huang, Xu [Department of Civil Engineering, University of Toronto, Toronto M5S 1A4 (Canada); Kwon, Oh-Sung, E-mail: os.kwon@utoronto.ca [Department of Civil Engineering, University of Toronto, Toronto M5S 1A4 (Canada); Bentz, Evan [Department of Civil Engineering, University of Toronto, Toronto M5S 1A4 (Canada); Tcherner, Julia [Candu Energy Inc. a member of SNC-Lavalin Group, Mississauga L5K 1B1 (Canada)
2017-04-01
Highlights: • The aging effects on the performance of a nuclear containment structure is evaluated. • A numerical model of the structure is subjected to increasing internal pressure. • No through-thickness cracks are predicted under the design level internal pressure. • The structure is predicted to be ductile up to large internal pressure levels. - Abstract: The objective of this study is to investigate the long-term performance of a typical CANDU® containment structure. A three-dimensional nonlinear finite element model was built to realistically evaluate the performance of the structure under service load as well as a hypothetical beyond-design level internal pressure. Consideration is given to the time-dependent effects, such as shrinkage, creep, and relaxation of prestressing tendons, over a 60-year timeframe. In addition, the sensitivity of the response of the containment structure against support condition, internal temperature profile and temporary construction openings was also investigated. The accuracy of the numerical model was validated against structural measurements made during a routine leak rate test. The analysis results show that the containment structure would develop a ductile mechanism if the internal pressure significantly exceeded the design pressure. The pressure-deformation relationship of the structure is sensitive to the considered time-dependent parameters.
Repair and preventive maintenance technology for BWR reactor internals and piping
International Nuclear Information System (INIS)
Ootsubo, Tooru; Itou, Takashi; Sakashita, Akihiro
2009-01-01
Stress corrosion cracking of welding portion has found in many domestic and foreign BWR reactor internals and Primary Loop Recirculation piping. Also, repair and preventive maintenance technologies for SCC has been developed and/or adopted to BWRs in recent years. This paper introduces the sample of these technologies, such as seal-welding for SCC on BWR reactor internals, preventive maintenance technology for PLR piping such as Corrosion Resistant Cladding, Internal Polishing and Induction Heating Stress Improvement. These technologies are introduced on 'E-Journal of Advanced Maintenance', which is an international journal on a exclusive website of Japan Society of Maintenology. (author)
On the Teaching of Science, Technology and International Affairs.
Weiss, Charles
2012-03-01
Despite the ubiquity and critical importance of science and technology in international affairs, their role receives insufficient attention in traditional international relations curricula. There is little literature on how the relations between science, technology, economics, politics, law and culture should be taught in an international context. Since it is impossible even for scientists to master all the branches of natural science and engineering that affect public policy, the learning goals of students whose primary training is in the social sciences should be to get some grounding in the natural sciences or engineering, to master basic policy skills, to understand the basic concepts that link science and technology to their broader context, and to gain a respect for the scientific and technological dimensions of the broader issues they are addressing. They also need to cultivate a fearless determination to master what they need to know in order to address policy issues, an open-minded but skeptical attitude towards the views of dueling experts, regardless of whether they agree with their politics, and (for American students) a world-view that goes beyond a strictly U.S. perspective on international events. The Georgetown University program in Science, Technology and International Affairs (STIA) is a unique, multi-disciplinary undergraduate liberal arts program that embodies this approach and could be an example that other institutions of higher learning might adapt to their own requirements.
DEFF Research Database (Denmark)
Li-Ying, Jason; Wang, Yuandi
2015-01-01
Innovation policy in China has been promoting “indigenous innovation” by urging Chinese firms to strengthen their internal research and development (R&D) expenditures and to actively acquire external technologies only if they are advanced and necessary. This policy aims to gradually achieve...... indigenous innovation policy will continue to make sense in the next decade. This study uses a unique dataset containing information on 178 Chinese firms that were active in technology in-licensing during 2000-2004 - and their patenting activities up to 2009 - to investigate this question. Our findings...... suggest that, given the importance of R&D, Chinese firms that in-licensed international technologies have performed better with regard to indigenous innovation than those that mainly inlicensed domestic technologies, even though the national innovation policy suggests otherwise. The strategic implications...
Manager, Technology Services | IDRC - International Development ...
International Development Research Centre (IDRC) Digital Library (Canada)
The Manager, Technology Services (TS) manages IT operations and technical support. ... while ensuring high levels of customer service quality and availability. .... Represents the division and Centre during internal and external meetings, ...
1st International Scientific Conference on Intelligent Information Technologies for Industry
Kovalev, Sergey; Tarassov, Valery; Snášel, Václav
2016-01-01
This volume of Advances in Intelligent Systems and Computing contains papers presented in the main track of IITI 2016, the First International Conference on Intelligent Information Technologies for Industry held in May 16-21 in Sochi, Russia. The conference was jointly co-organized by Rostov State Transport University (Russia) and VŠB – Technical University of Ostrava (Czech Republic) with the participation of Russian Association for Artificial Intelligence (RAAI) and Russian Association for Fuzzy Systems and Soft Computing (RAFSSC). The volume is devoted to practical models and industrial applications related to intelligent information systems. The conference has been a meeting point for researchers and practitioners to enable the implementation of advanced information technologies into various industries. Nevertheless, some theoretical talks concerning the-state-of-the-art in intelligent systems and soft computing are included in the proceedings as well.
International Nuclear Information System (INIS)
Pickett, Chris A.; Tolk, Keith M.; Keel, Frances; LaMontagne, Steve
2010-01-01
The Institute of Nuclear Materials Management (INMM) held an International Workshop on 'Containment and Surveillance: Concepts for the 21st Century' on June 6-11, 2010 at the Oak National Laboratory in Oak Ridge, Tennessee. The National Nuclear Security Administration Offices of Non-proliferation Research and Development and Office of Nuclear Safeguards sponsored the event. The workshop focused on determining concepts and needs for 21st century containment and surveillance (C/S) systems that support International Atomic Energy Agency safeguards and future arms control agreements. Panel discussions from subject matter experts and international practitioners provided the daily topical theme of the following areas of C/S: authentication, tagging, sealing, containment verification, and surveillance systems. Each panel discussion was followed with a question and answer session with the audience and an afternoon breakout session. The facilitated breakout sessions were used to compile and determine future needs. Individuals attending the workshop included C/S experts and practitioners; IAEA and arms control inspectors, technology providers, vendors, students and individuals with an interest in or desire to learn about future C/S system needs. The primary goal for the workshop was to produce a document that details the future research and development needs for C/S systems that support nuclear safeguards and arms control missions. This paper will present a compilation of the information obtained from breakout sessions at the workshop. (author)
In Situ Remediation Integrated Program, Evaluation and assessment of containment technology
International Nuclear Information System (INIS)
Gerber, M.A.; Fayer, M.J.
1994-04-01
The In Situ Remediation Integrated Program (ISRIP) was established by the US Department of Energy (DOE) to advance the state-of-the art of innovative in situ remediation technologies to the point of demonstration and to broaden the applicability of these technologies to the widely varying site remediation requirements throughout the DOE complex. This program complements similar ongoing integrated demonstration programs being conducted at several DOE sites. The ISRIP has been conducting baseline assessments on in situ technologies to support program planning. Pacific Northwest Laboratory conducted an assessment and evaluation of subsurface containment barrier technology in support of ISRIP's Containment Technology Subprogram. This report summarizes the results of that activity and provides a recommendation for priortizing areas in which additional research and development is needed to advance the technology to the point of demonstration in support of DOE's site restoration activities
International Nuclear Information System (INIS)
Boyd, Anya
2012-01-01
Transfer of low carbon technologies to developing countries is 1 approach for tackling rising global emissions. An international technology transfer mechanism has been proposed under the UNFCCC; however, it remains unclear how this international mechanism would translate into local level technology implementation. This study uses biogas technology in South Africa to obtain empirical data inductively related to technology transfer. Observations and activities specific to the biogas sector in South Africa are put forward based on site visits and stakeholder discussions in South Africa, the UK, Germany and Sweden. This paper presents empirical findings on technology transfer in the biogas sector in South Africa and analyses the role of an international technology mechanism in supporting the uptake of biogas. Many of the barriers to biogas technology in South Africa are national level constraints such as lack of supportive policy environment, financial incentives and information sharing. This case study supports the argument that it will be unrealistic for international technology mechanisms to capture the necessary specificities of individual technologies at a country level. Therefore, as demonstrated through the example of biogas technology in South Africa, there is a need for both effective national and international engagement to support technology implementation. - Highlights: ► The UNFCCC technology mechanism aims to increase low carbon technology deployment. ► The interface of global technology frameworks and national implementation is unclear. ► Biogas is a widely used technology yet its uptake in South Africa (SA) is minimal. ► Empirical data is gathered from biogas sites in SA, UK, Germany and Sweden. ► Findings show biogas uptake in SA requires national and international support
Study on international publicity and export strategy establishment of nuclear technology
Energy Technology Data Exchange (ETDEWEB)
Lee, Ji Bok; Choi, C.O.; Park, K. B.; Chang, M. H.; Kim, K. K.; Yang, M. S.; Jung, I. H.; Kim, K. P.; Wu, J. S.; Jang, C. I.; Han, B. O.; Sim, J. H.; Chung, M.; Chung, J.K
1999-05-01
The objective of this study is to devise a proper measure for international publicity and technology export strategy. Analysed and summaries in detail are other countries nuclear policy trend and the current technology development status of Korea Standard Nuclear Plant that we developed on our own technology, design and construction technology for research reactor, System-integrated Modular Advanced Reactor of which design is in progress, Direct use of Spent PWR Fuel in CANDU Reactors, and Radioisotopes. Based on that, the measures are proposed for the export industrialization of nuclear technology and establishment of the export basis. Also the international nuclear cooperation and publicity strategy are suggested to support the technology export basis. By surveying the world nuclear status, the direction for the international cooperation and publicity is settled and the specific publicity strategy is proposed for the cooperation with IAEA and multi-countries and the establishment of the nuclear technology export basis. As part of this project, the panel on major technologies such as Korea Standard Nuclear Plant, HANARO, and System-integrated Modular Advanced Reactor was displayed successfully at the IAEA meeting, which contribute much to the publicity of our nuclear technology to the international nuclear society. (author)
Mechanisms for international technology exchange, privatization, and transfer
International Nuclear Information System (INIS)
Mayfield, T.
1993-01-01
An environmental technology transfer business assistance program is needed to encourage collaboration and technology transfer within the international community. This program helped to find appropriate mechanisms to facilitate the transfer of these technologies for use by DOE environmental restoration and waste management (ER/WM) programs while assisting U.S. private industry (especially small and medium size business) in commercializing the technologies nationally and abroad
Peptides containing internal residues of pyroglutamic acid: proton NMR characteristics
International Nuclear Information System (INIS)
Khan, S.A.
1986-01-01
The proton NMR characteristics of internal pyroglutamic acid (Glp; 5-oxoproline) residues in seven tripeptides of the general structure Boc-Xxx-Glp-Yyy-NH 2 were studied. In general, the chemical shifts of several diagnostic protons moved downfield on going from the Glu-containing peptides (Boc-Xxx-Glu-Yyy-NH 2 ) to the corresponding Glp-containing peptides. The C-2 proton of the Xxx residue was shifted by about 1.1 ppm. The N-2 proton of the Yyy residue was shifted by about 0.5 ppm. The C-2 proton of the Glx residue itself was shifted by about 0.5 ppm. One of the Glx C-3 protons was also shifted by about 0.5 ppm, but the other remained essentially unchanged. Finally, the Glx C-4 protons were shifted by about 0.3 ppm. Internal Glu residues are readily converted chemically into internal Glp residues. This conversion also occurs as a side reaction during HP cleavage of the protecting group from Glu(OBzl) residues. The spontaneous fragmentation of serum proteins C3, C4 and λ 2 -macroglobulin under denaturing conditions is probably due to regioselective hydrolysis of an internal Glp residue formed in each of these proteins upon denaturation. These proton NMR characteristics may be useful in establishing the presence of internal Glp residues in synthetic and natural peptides
Drivers of international performance of Brazilian technology-based firms
Serpa Fagundes de Oliveira, Maria Carolina; Scherer, Flavia Luciane; Schneider Hahn, Ivanete; de Moura Carpes, Aletéia; Brachak dos Santos, Maríndia; Nunes Piveta, Maíra
2018-01-01
For Technology-Based Firms, international expansion represents an opportunity for growth and value creation. The present study was designed to analyze the role of technology-based companies (TBCs) internationalization drivers on international performance. Therefore, a descriptive research was carried out with a quantitative approach performed through a survey. Data collection happened with 53 Brazilian TBCs located in innovation habitats. These data were analyzed by multivariate statistical t...
Global power knowledge science and technology in international affairs
Barth, Kai-Henrik
2006-01-01
Osiris annualy examines a particular topic in the history of science, bringing together experts in the field to consider multiple aspects of the time period, episode, or theme. Volume 21, Historical Perspectives on Science, Technology, and International Affairs, explores the ways in which scientists and issues in science and technology have played significant roles in foreign policy and international relations, especially since the Second World War.
International Conference on NextGen Electronic Technologies
Thalmann, Nadia; Bhaaskaran, V
2017-01-01
This book is a collection of keynote lectures from international experts presented at International Conference on NextGen Electronic Technologies (ICNETS2-2016). ICNETS2 encompasses six symposia covering all aspects of electronics and communications domains, including relevant nano/micro materials and devices . This volume comprises of recent research in areas like computational signal processing analysis, intelligent embedded systems, nanoelectronic materials and devices, optical and microwave technologies, VLSI design: circuits systems and application, and wireless communication networks, and the internet of things. The contents of this book will be useful to researchers, professionals, and students working in the core areas of electronics and their applications, especially to signal processing, embedded systems, and networking.
Properties of tire rubber with zinc-containing technological additives
Directory of Open Access Journals (Sweden)
S. N. Kayushnikov
2017-01-01
Full Text Available In this paper, we studied the influence of zinc-containing technological additives on partial replacement of zinc oxide and stearic acid on deformation-strength and performance properties of tire elastomeric compositions based on polyisoprene rubber and combination of oil-filled butadiene-styrene and polybutadiene rubbers. It was revealed that partial replacement of zinc oxide and stearic acid with zinc-containing technological additives does not significantly affect the basic physico-mechanical properties of rubbers based on synthetic rubbers of general use. It was determined that the introduction of zinc-containing technological additives SCC2 in combination with zinc oxide in all the studied ratios and SCC3 in combination with zinc oxide in 4: 1 and 3: 1 ratios leads to increase (up to 10.4% of the resistance of these rubbers under the action of temperature-force fields, which is probably due to a more even distribution of polar components of curing system in non-polar elastomeric matrix, as well as the type of cross-links formed during vulcanization under the action of surface-active additives. It has been found that the introduction of zinc-containing additives into the elastomeric compositions based on SRMS-30 ARKM-15 + SRD in combination with zinc oxide leads to increase to 6.3% of wear resistance of rubbers, which may be due to a lower defectiveness of vulcanization structure of these rubbers, concentration of stress centers in the material. For rubbers based on SRI-3, preservation of bond strength of rubber with a textile cord at a sufficiently high level is shown.
International Nuclear Information System (INIS)
1987-12-01
The first meeting of the IAEA International Working Group on Advanced Technologies for Water Cooled Reactors was held in Vienna, Austria from 18-21 May 1987. Part I of the Summary Report contains the minutes of the meeting
The evolving role of information technology in internal auditing
2015-01-01
M.Com. (Computer Auditing) Modern organizations are increasingly dependent on information technology (IT) for various reasons: to enhance their operational efficiency, reduce costs or even attain a competitive advantage. The role of information technology in the organization continues to evolve and this has an impact for the internal audit functions that serve these organizations. The study investigated whether the King III report, ISACA standards and IIA standards assist the internal audi...
3rd International Conference on Multimedia Technology
Yang, Jian; Jiao, Feng
2014-01-01
Proceedings of the 3rd International Conference on Multimedia Technology (ICMT2013) focuses on both the theory and applications of multimedia technology. The recent advances, new research findings and applications in the fields of theoretical, experimental and applied image & video processing and multimedia technology presented at the conference are brought together in this book. It will serve as a valuable reference for scientists and engineers working in multimedia and related fields. Prof. Aly A. Farag works at the University of Louisville, USA; Prof. Jian Yang works at Tsinghua University, China; Dr. Feng Jiao works at Nanjing University of Information Science & Technology, China.
Directory of Open Access Journals (Sweden)
Carina Araújo
2014-09-01
Full Text Available This paper explores the key factors that foster technology transfer within the triad university-industry-government in an international context, i.e., the Enterprise Europe Network (EEN. Based on 71 technological Partnership Agreements (PAs, estimation results indicate that PAs associated to partners that provide their collaborators with the appropriate training in technology transfer-related issues, present substantial past experience in international or technological projects, and participate in extensive networks, are those that achieve better performances in terms of international technology transfer. High levels of formal schooling per se are not a key determinant of international technology transfer; the critical factor is highly educated human resources who receive complementary training in technology transfer issues.
Specificity of continuous auditing approach on information technology internal controls
Directory of Open Access Journals (Sweden)
Kaćanski Slobodan
2012-01-01
Full Text Available Contemporary business world, can not be imagined without the use of information technology in all aspects of business. The use of information technology in manufacturing and non-production companies' activities can greatly facilitate and accelerate the process of operation and control. Because of its complexity, they possess vulnerable areas and provide space for the emergence of accidental and intentional frauds that can significantly materially affect the business decisions made by the companies' management. Implementation of internal controls can greatly reduce the level of errors that can contribute to making the wrong decisions. In order to protect the operating system, the company's management implement an internal audit to periodically examine the fundamental quality of the internal control systems. Since the internal audit, according to its character, only periodically checks quality of internal control systems and information technologies to be reported to the manager, the problem arises in the process of in wrong time reporting the management structures of the business entity. To eliminate this problem, management implements a special approach to internal audit, called continuous auditing.
International Nuclear Information System (INIS)
2014-01-01
The third International youth scientific school-conference took place 10-13 April 2014 year in Moscow on the basis National Research Nuclear University MEPhI and RAS Lebedev P.N. Physical Institute. The actual scientific problems of current fundamental and applied physics as well as nuclear and physical technologies were discussed. This book of abstracts contains many interesting items devoted problems of theoretical physics and astrophysics, nuclear physics, nanotecnology, laser physics and plasma physics [ru
International technology identification, transfer, and program support
International Nuclear Information System (INIS)
Kitchen, B.
1993-01-01
Savannah River Site (SRS) activities primarily address vitrification technologies being investigated with Japan and the former Soviet Union (FSU). They also support the overall management of EM's international activities
Strategic issues in information technology international implications for decision makers
Schütte, Hellmut
1988-01-01
Strategic Issues in Information Technology: International Implications for Decision Makers presents the significant development of information technology in the output of components, computers, and communication equipment and systems. This book discusses the integration of information technology into factories and offices to increase productivity.Organized into six parts encompassing 12 chapters, this book begins with an overview of the advancement towards an automated interpretation communication system to achieve real international communication. This text then examines the main determining
Development of phosphate glass microspheres containing holmium for selective internal radiotherapy
International Nuclear Information System (INIS)
Barros Filho, Eraldo Cordeiro
2016-01-01
The selective internal radiotherapy is an alternative for some kinds of cancer as the hepatocellular carcinoma (HCC) or primary liver cancer treatment. In this treatment, glass or polymer microspheres containing radionuclides inside their structure are introduced in the liver through hepatic artery and trapped at the arterioles that feed the tumor. In this work, the development of phosphate glasses containing holmium for production of microspheres and their application in Brazil are proposed. The developed glasses presented suitable chemical durability, density of 2,7(3) g/cm 3 , high thermal stability and the impurities contained therein do not preclude the treatment. The microspheres were produced by the flame method and the gravitational fall method, and were characterized by means of several techniques to evaluate shape, average particle size, activity and biocompatibility suitable for selective internal radiotherapy. Based in the main results, the submission to in vivo tests is proposed. (author)
Probabilistic evaluation of concrete containment capacity for beyond design basis internal pressures
International Nuclear Information System (INIS)
Tang, H.T.; Dameron, R.A.; Rashid, Y.R.
1995-01-01
For beyond design basis internal pressure loading, experimental studies have demonstrated that the most probable failure mode governing the ultimate functional capacity of concrete containments is leak rather than break. Based on leak rates measured in experiments, a prediction formula for leak rate as functions of containment liner size and internal pressure has been postulated. The determination of liner tear is cast in a probabilistic framework. In calculating leakage, particular attention is paid to the evaluation of leakage versus rupture and the loading rates that may be required to leapfrog over a leakage mode. (orig.)
Reliability test for reactor internals rejuvenation technology
International Nuclear Information System (INIS)
Uchiyama, Junichi
1998-01-01
41 transparencies were presented on the subject of 'Reliability test for reactor internals rejuvenation technology'. The items presented give an introduction on the management of plant life in Japan and introduce the Nuclear Power Engineering Corporation (NUPEC). The question of what reliability tests for rejuvenation of reactor internals are is discussed in some detail and an outline of each test is given. Altogether six methods to rejuvenate reactor internals are presented, two of which have already been applied to actual plants. The presentation was supported by many detailed drawings and images
International Nuclear Information System (INIS)
Ainul Hayati Daud
1997-01-01
In the advent of new technologies and knowledge, countries need to rely on one another for progress and development. At the same time, new challenges to development, which are beyond the competence of any country to approach individually, have emerged. These have led to greater need for international co-operation, particularly among the developing countries. In Malaysia, international technical co-operation has contributed significantly towards the development of nuclear technology. Malaysia has received technical assistance through the multilateral, regional and bilateral co-operation. This assistance complements the efforts of the government to meet the primary objectives of science and technology programme, which are; intensification of R and D capacity and applications of technologies, both acquired and developed, in national development. Over the last one and a half decade, more than 70 projects valued almost USD 15 millions, were implemented under the Technical Assistance Programme of the International Atomic Energy Agency and the Bilateral Technical Assistance Programme of Japan and Australia. Malaysia also has benefited from the regional technical co-operation programme such Regional Co-operative Agreement for Asia and Pacific Region, United Nation Department Programme, International Nuclear Co-operation in Asia. While receiving assistance, Malaysia continues to assist other developing countries in their development efforts in the fields of nuclear technology, through the various international co-operation programmes. This report reviews the technical assistance received through the international co-operation and its contributions towards the development of nuclear technology in Malaysia for period 1980 - 1996
People's Republic of China in the International Technology Exchange
Directory of Open Access Journals (Sweden)
Alexander Igorevich Salitskiy
2015-12-01
Full Text Available The authors investigate the current state of the S&T in China in the context of its historical development and national policy in the sphere. The evaluation of the Chinese scientific and technological potential is based on some indicators of foreign trade as well as patent activity - in international comparisons. The trends in Chinese S&T sector and its role in the international technology transfers are viewed in the context of internationalization of the global economy. Today’s globally recognized achievements of China in trade in technology-intensive goods and services are based on a long history of rational state policy in acquisition and diffusion of foreign technology and expertise. This policy have resulted in the build-up of S&T system - which is already remarkably productive and keeps growing. One important and specific feature of China’s role in international exchange of high-tech goods and knowledge-intensive services is a growing self-capacity, and a lowering dependence on foreign sources (in relative terms.
Proceedings of The Twentieth International Symposium on Space Technology and Science. Volume 2
Energy Technology Data Exchange (ETDEWEB)
NONE
1996-10-31
The 20th international symposium on space technology and science was held in Nagaragawa city, Gifu prefecture on May 19-25, 1996, and 401 papers were made public. Out of those, 112 papers were summed up as Volume 2 following the previous Volume 1. As to space transportation, the paper included reports titled as follows: Conceptual study of H-IIA rocket (upgraded H-II rocket); Test flight of the launch vehicle; International cooperation in space transportation; etc. Concerning microgravity science, Recent advances in microgravity research; Use of microgravity environment to investigate the effect of magnetic field on flame shape; etc. Relating to satellite communications and broadcasting, `Project GENESYS`: CRL`s R and D project for realizing high data rate satellite communications networks; The Astrolink {sup TM/SM} system; etc. Besides, the paper contained reports on the following fields: lunar and planetary missions and utilization, space science and balloons, earth observations, life science and human presence, international cooperation and space environment, etc
The Technology of Socio-Professional Students Training for International Cooperation
Directory of Open Access Journals (Sweden)
Y. V. Troynicova
2012-01-01
Full Text Available The contemporary development of the national system of higher education is accompanied by its large scale integration into the international scientific and educational environment. The young people’ effective integration into the global conglomerate of educational systems depends on successful mastering the international cooperation skills. Designing and implementing the integrative portfolio of educational technologies aimed at developing the corresponding competences are regarded as the key factors in solving the above mentioned problem.The paper presents the educational technology preparing students for international cooperation. Its aim and principles, subject-oriented and technology aspects are defined along with the diagnostic control activities. The methodology bases compiles the person-oriented, culture-oriented, communicative-functional approaches, which result in working out the personalized, subjectively functional, culture-creative methods and forms of training in the context of foreign language vocational education. The given technology was approbated at Udmurtskiy State University which resulted in upgrading the students’ foreign language competence and the growing numbers of participants in the international academic exchange programs.
International Nuclear Information System (INIS)
Mayne, P.W.; Mulholland, J.A.
1995-01-01
Plasma technology is an extremely versatile and powerful means of obtaining very high temperatures that can be used in a variety of environmental situations. Since most types of waste products and contaminants can be treated effectively and efficiently, plasma systems have been developed to address the disposal and annihilation domestic of medical, hazardous, radioactive, military, and miscellaneous wastes. Plasma technologies can also be implemented to recycle and recover usable materials from metallic wastes. The International Symposium on Environmental Technologies: Plasma Systems and Applications was held at the Omni Hotel in Atlanta, Georgia on October 8--12, 1995 to bring together a large group of technical experts working on the use of plasma for solving environmental problems. The Symposium is a sequel to the 1994 Metatechnies Conference on Stabilization and Volarization of Ultimate Waste by Plasma Processes that was held in September of 1994 at Bordeaux Lac, France. The proceedings to this second international conference contain the written contributions from eleven sessions and are published in two volumes. A total of 65 papers address the use of plasma systems for environmental applications and include topics concerning the development and use of innovative technologies for waste treatment, environmental remediation, recycling, characterization of the plasma and solid residue, off-gas analyses, as well as case studies and regulatory policies
Dalal, Medha; Archambault, Leanna; Shelton, Catharyn
2017-01-01
This mixed-methods study explored the impacts of a semester-long technology professional development for secondary school international teachers from developing nations around the world. We used (a) a survey approach to examine international teachers' perceived technology integration abilities using the technological pedagogical content knowledge…
International Conference on Information Technology and Agricultural Engineering (ICITAE 2011)
Sambath, Sabo; Information Technology and Agricultural Engineering
2012-01-01
This volume comprises the papers from 2011 International Conference on Information Technology and Agricultural Engineering (ICITAE 2011). 2011 International Conference on Information Technology and Agricultural Engineering (ICITAE 2011) has been held in Sanya, China, December 1-2, 2011. All the papers have been peer reviewed by the selected experts. These papers represent the latest development in the field of materials manufacturing technology, spanning from the fundamentals to new technologies and applications. Specially, these papers cover the topics of Information Technology and Agricultural Engineering. This book provides a greatly valuable reference for researchers in the field of Information Technology and Agricultural Engineering who wish to further understand the underlying mechanisms and create innovative and practical techniques, systems and processes. It should also be particularly useful for engineers in information technology and agriculture who are responsible for the efficient and effective ...
Comparative analyses for selected clean coal technologies in the international marketplace
Energy Technology Data Exchange (ETDEWEB)
Szpunar, C.B.; Gillette, J.L.
1990-07-01
Clean coal technologies (CCTs) are being demonstrated in research and development programs under public and private sponsorship. Many of these technologies could be marketed internationally. To explore the scope of these international opportunities and to match particular technologies with markets appearing to have high potential, a study was undertaken that focused on seven representative countries: Italy, Japan, Morocco, Turkey, Pakistan, the Peoples' Republic of China, and Poland. The results suggest that there are international markets for CCTs and that these technologies can be cost competitive with more conventional alternatives. The identified markets include construction of new plants and refurbishment of existing ones, especially when decision makers want to decrease dependence on imported oil. This report describes potential international market niches for U.S. CCTs and discusses the status and implications of ongoing CCT demonstration activities. Twelve technologies were selected as representative of technologies under development for use in new or refurbished industrial or electric utility applications. Included are the following: Two generic precombustion technologies: two-stage froth-flotation coal beneficiation and coal-water mixtures (CWMs); Four combustion technologies: slagging combustors, integrated-gasification combined-cycle (IGCC) systems, atmospheric fluidized-bed combustors (AFBCs), and pressurized fluidized-bed combustors (PFBCs); and Six postcombustion technologies: limestone-injection multistage burner (LIMB) systems, gas-reburning sorbent-injection (GRSI) systems, dual-alkali flue-gas desulfurization (FGD), spray-dryer FGD, the NOXSO process, and selective catalytic reduction (SCR) systems. Major chapters of this report have been processed separately for inclusion on the data base.
Distance Education Technologies in Asia | IDRC - International ...
International Development Research Centre (IDRC) Digital Library (Canada)
2010-11-10
Nov 10, 2010 ... Book cover Distance Education Technologies in Asia ... Canada's International Development Research Centre (IDRC) deserves our ... results of its 2017 call for proposals to establish Cyber Policy Centres in the Global South.
An advanced dispatching technology for large container inspection system
International Nuclear Information System (INIS)
Chen Zhiqiang; Zhang Li; Kang Kejun; Gao Wenhuan
2001-01-01
The author describes the transmitting and dispatching technology of large container inspection system. It introduces the structure of the double buffer graded pipe lining used in the system. Strategies of queue mechanism and waiting dispatch policy are illustrated
TECHNOLOGICAL IMPERATIVE IMPACT OF GLOBALIZATION ON INTERNATIONAL AGRICULTURAL ECONOMY
Directory of Open Access Journals (Sweden)
А. Кozlova
2014-09-01
Full Text Available The article highlights the factors influencing agricultural production towards global market. The study consists basic fundamental imperatives of globalization on the agricultural sector in international economic relations. The article analyzes the strategic priorities of the international agricultural sector, which includes financial and credit support, legal aspects, processes and integration of organizational structures. Technological imperatives require a large structural and institutional turn in the Ukrainian economy on the basis of current trends in the global economy, scientific and technical potential. There is a growing importance of organizing and conducting international level in the field of technological forecasting. This type of prediction is considered as backbone component in strategic forecasting and economic development programming.
International Nuclear Information System (INIS)
1989-05-01
The Second Meeting of the IAEA International Working Group on Advanced Technologies for Water Cooled Reactors (IWGATWR) was held in Helsinki, Finland, from 6-9 June 1988. The Summary Report (Part II) contains the papers which review the national programmes since the first meeting of IWGATWR in May 1987 in the field of Advanced Technologies for Water Cooled Reactors and other presentations at the Meeting. A separate abstract was prepared for each of these 12 papers presented at the meeting. Figs and tabs
Wolford, David S.; Myers, Matthew G.; Prokop, Norman F.; Krasowski, Michael J.; Parker, David S.; Cassidy, Justin C.; Davies, William E.; Vorreiter, Janelle O.; Piszczor, Michael F.; McNatt, Jeremiah S.
2015-01-01
Measurement is essential for the evaluation of new photovoltaic (PV) technology for space solar cells. NASA Glenn Research Center (GRC) is in the process of measuring several solar cells in a supplemental experiment on NASA Goddard Space Flight Center's (GSFC) Robotic Refueling Mission's (RRM) Task Board 4 (TB4). Four industry and government partners have provided advanced PV devices for measurement and orbital environment testing. The experiment will be on-orbit for approximately 18 months. It is completely self-contained and will provide its own power and internal data storage. Several new cell technologies including four- junction (4J) Inverted Metamorphic Multijunction (IMM) cells will be evaluated and the results compared to ground-based measurements.
2nd International Conference on Mobile and Wireless Technology
Wattanapongsakorn, Naruemon
2015-01-01
This book provides a snapshot of the current state-of-the-art in the fields of mobile and wireless technology, security and applications. The proceedings of the 2nd International Conference on Mobile and Wireless Technology (ICMWT2015), it represents the outcome of a unique platform for researchers and practitioners from academia and industry to share cutting-edge developments in the field of mobile and wireless science technology, including those working on data management and mobile security. The contributions presented here describe the latest academic and industrial research from the international mobile and wireless community. The scope covers four major topical areas: mobile and wireless networks and applications; security in mobile and wireless technology; mobile data management and applications; and mobile software. The book will be a valuable reference for current researchers in academia and industry, and a useful resource for graduate-level students working on mobile and wireless technology...
International Nuclear Information System (INIS)
Matalucci, R.V.
1995-07-01
This document represents a summary of 27 foreign-based environmental restoration and waste management technologies that have been screened and technically evaluated for application to the cleanup problems of the Department of Energy (DOE) nuclear weapons complex. The evaluation of these technologies was initiated in 1992 and completed in 1995 under the DOE's International Technology Coordination Program of the Office of Technology Development. A methodology was developed for conducting a country-by-country survey of several regions of the world where specific environmental technology capabilities and market potential were investigated. The countries that were selected from a rank-ordering process for the survey included: then West Germany, the Netherlands, France, Japan, Taiwan, the Czech and Slovak Republics, and the Former Soviet Union. The notably innovative foreign technologies included in this document were screened initially from a list of several hundred, and then evaluated based on criteria that examined for level of maturity, suitability to the DOE needs, and for potential cost effective application at a DOE site. Each of the selected foreign technologies that were evaluated in this effort for DOE application were subsequently matched with site-specific environmental problem units across the DOE complex using the Technology Needs Assessment CROSSWALK Report. For ease of tracking these technologies to site problem units, and to facilitate their input into the DOE EnviroTRADE Information System, they were categorized into the following three areas: (1) characterization, monitoring and sensors, (2) waste treatment and separations, and (3) waste containment. Technical data profiles regarding these technologies include title and description, performance information, development status, key regulatory considerations, intellectual property rights, institute and contact personnel, and references
2nd Karlsruhe International Summer School on Fusion Technologies
International Nuclear Information System (INIS)
Bahm, W.; Stycz, K.
2008-01-01
For the second time, the Karlsruhe Research enter together with European research institutions and industries invited young scientists and engineers to its ''International Summer School on Fusion Technologies.'' Fifty participants from all over Europe attended the lectures by 35 experts preesenting contributions from their areas of competence. Ten young scientists from India and another 10 from China were connected to the events by video link. Physics student Kornelia Stycz describes her impressions as a participant in the ''2 nd International Summer School on Fusion Technologies.'' (orig.)
International energy technology collaboration: benefits and achievements
International Nuclear Information System (INIS)
1996-01-01
The IEA Energy Technology Collaboration Programme facilitates international collaboration on energy technology research, development and deployment. More than 30 countries are involved in Europe, America, Asia, Australasia and Africa. The aim is to accelerate the development and deployment of new energy technologies to meet energy security, environmental and economic development goals. Costs and resources are shared among participating governments, utilities, corporations and universities. By co-operating, they avoid unproductive duplication and maximize the benefits from research budgets. The IEA Programme results every year in hundreds of publications which disseminate information about the latest energy technology developments and their commercial utilisation. The IEA Energy Technology Collaboration Programme operates through a series of agreements among governments. This report details the activities and achievements of all 41 agreements, covering energy technology information centres and Research and Development projects in fossil fuels, renewable energy efficient end-use, and nuclear fusion technologies. (authors). 58 refs., 9 tabs
Identification of long-term containment/stabilization technology performance issues
International Nuclear Information System (INIS)
Matthern, G.E.; Nickelson, D.F.
1997-01-01
U.S. Department of Energy (DOE) faces a somewhat unique challenge when addressing in situ remedial alternatives that leave long-lived radionuclides and hazardous contaminants onsite. These contaminants will remain a potential hazard for thousands of years. However, the risks, costs, and uncertainties associated with removal and offsite disposal are leading many sites to select in situ disposal alternatives. Improvements in containment, stabilization, and monitoring technologies will enhance the viability of such alternatives for implementation. DOE's Office of Science and Technology sponsored a two day workshop designed to investigate issues associated with the long-term in situ stabilization and containment of buried, long-lived hazardous and radioactive contaminants. The workshop facilitated communication among end users representing most sites within the DOE, regulators, and technologists to define long-term performance issues for in situ stabilization and containment alternatives. Participants were divided into groups to identify issues and a strategy to address priority issues. This paper presents the results of the working groups and summarizes the conclusions. A common issue identified by the work groups is communication. Effective communication between technologists, risk assessors, end users, regulators, and other stakeholders would contribute greatly to resolution of both technical and programmatic issues
Institutional Distance and Partner Selection in International Technological Alliances
Krammer, Marius
2013-01-01
This study posits that institutional distance has a negative influence on partner selection in international technological alliances. Empirical results based on a dataset of firms in the global tire industry confirm that firms prefer technological partners from closer cognitive, normative and
5th International Conference on Sustainable Automotive Technologies
Subic, Aleksandar; Trufin, Ramona
2014-01-01
This book captures selected peer reviewed papers presented at the 5th International Conference on Sustainable Automotive Technologies, ICSAT 2013, held in Ingolstadt, Germany. ICSAT is the state-of-the-art conference in the field of new technologies for transportation. The book brings together the work of international researchers and practitioners under the following interrelated headings: fuel transportation and storage, material recycling, manufacturing and management costs, engines and emission reduction. The book provides a very good overview of research and development activities focused on new technologies and approaches capable of meeting the challenges to sustainable mobility. About the Editors: Prof. Dr. Jörg Wellnitz is the Dean of the Faculty of Mechanical Engineering, Technische Hochschule Ingolstadt, Germany. Prof. Dr. Aleksandar Subic is the Head of the School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University, Australia. Ramona Trufin, M.A. is the coordinator of the Facul...
Research Needs for Technology Education: An International Perspective
Ritz, John M.; Martin, Gene
2013-01-01
These authors report the findings of a study that sought to determine the most relevant research issues needed to be studied by the technology education profession. It used an international panel of experts to develop a list of important research issues for the school subject of technology education and for the preparation of teachers to better…
International and intranational technological spillovers and productivity growth in China
Fu, Xiaolan; Gong, Yundan
2009-01-01
Technological spillovers from foreign direct investment (FDI) have been regarded as a major source of technical progress and productivity growth. This paper explores the role of international and intranational technological spillovers from FDI in technical change, efficiency improvement, and total factor productivity growth in Chinese manufacturing firms using a recent Chinese manufacturing firm-level panel data set over the 2001–05 period. International industry-specific research and develop...
Directory of Open Access Journals (Sweden)
Jordana Bernard
2014-09-01
Full Text Available With the support of Tianjin Municipal People’s Government and the People’s Government of Binhai New Area, the “First China (Tianjin International Telemedicine Technology Exhibition” hosted by the American Telemedicine Association (ATA, will be held October 28- 30, 2014 at the Tianjin Binhai International Convention and Exhibition Center. The three day event will feature keynote sessions, concurrent discussion forums, exhibits (e.g., telemedicine, information technology, mHealth, a venture summit, meet-and-greet sessions for international and domestic companies for potential business collaboration, and policy discussions on China healthcare. For registration information: http://www.atacn.org/en/
International Nuclear Information System (INIS)
1987-12-01
The First Meeting of the IAEA International Working Group on Advanced Technologies for Water Cooled Reactors was held in Vienna, Austria from 18-21 May 1987. The Summary Report (Pt. 2) contains the papers which review the national programmes in the field of Advanced Technologies for Water Cooled Reactors and other presentations at the Meeting. A separate abstract was prepared for each of the 10 papers presented at this meeting. Refs, figs
International Journal of Engineering, Science and Technology
African Journals Online (AJOL)
International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 7, No 3 (2015) >. Log in or Register to get access to full text downloads.
International Journal of Engineering, Science and Technology
African Journals Online (AJOL)
International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 2, No 11 (2010) >. Log in or Register to get access to full text downloads.
International Journal of Engineering, Science and Technology
African Journals Online (AJOL)
International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 8, No 3 (2016) >. Log in or Register to get access to full text downloads.
International Journal of Engineering, Science and Technology
African Journals Online (AJOL)
International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 3, No 3 (2011) >. Log in or Register to get access to full text downloads.
International Journal of Engineering, Science and Technology
African Journals Online (AJOL)
International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 2, No 2 (2010) >. Log in or Register to get access to full text downloads.
International Technology-Oriented Agreements to Address Climate Change
International Nuclear Information System (INIS)
De Coninck, H.C.; Fischer, C.; Newell, R.G.; Ueno, T.
2007-01-01
Much discussion has surrounded possible alternatives for international agreements on climate change, particularly post-2012. Among these alternatives, technology-oriented agreements (TOAs) are perhaps the least well defined. We explore what TOAs may consist of, why they might be sensible, which TOAs already exist in international energy and environmental governance, and whether they have the potential to make a valuable contribution to addressing climate change. We conclude that TOAs aimed at knowledge sharing and coordination, research, development, or demonstration could increase the overall efficiency and effectiveness of international climate cooperation, but have limited environmental effectiveness on their own. Technology transfer agreements are likely to have similar properties unless the level of resources expended on them is large, in which case they could be environmentally significant. Technology mandates, standards, or incentives can be environmentally effective, within the applicable sector. However, they are likely to be less cost-effective than broad-based, flexible approaches that place a price on emissions. These results indicate that TOAs have the potential to improve the effectiveness of the global response to climate change. The success of specific TOAs will depend on their design, implementation, and the role they are expected to play relative to other components of the climate policy portfolio
International Nuclear Information System (INIS)
2007-07-01
This CD-ROM is attached to the booklet 'Managing nuclear knowledge: IAEA activities and international coordination. Asian Network for Education in Nuclear Technology (ANENT)'. It contains the background material with regard to ANENT in full text, including policy level papers, reports, presentation material made by Member States, and meeting summaries during the period 2002-2005. Further information on the current ANENT activities and related IAEA activities is available at 'http://anent-iaea.org' and 'http://iaea.org/inisnkm'
Assessment of international remedial technologies for application to Superfund sites
International Nuclear Information System (INIS)
Sanning, D.E.
1990-01-01
This paper presents some of the logical arguments for conducting research on remedial technologies for contaminated land and groundwater at an international level. It gives information on many of the international organizations that are involved in environmental programs, but it especially gives emphasis to the NATO-CCMS pilot study on Demonstration of Remedial Action Technologies for Contaminated Land and Groundwater. The purpose of the study is to field demonstrate and evaluate new/innovative technologies for remedial action at uncontrolled hazardous waste sites. This study is a logical international extension of the US EPA SITE program. It offers the opportunity to obtain a multiple data base on various remedial action unit processes without any single country having to commit a disproportionate amount of its internal resources to any specific activity. Each participating country provides the necessary resources for those demonstrations which they are contributing to the study. Sites are selected by a majority vote of all participating countries (no country is permitted to vote for its own sites). The study is a 5 year program with participants from Canada, Denmark, Federal Republic of Germany, France, Greece, Italy, Japan, the Netherlands, Norway, Spain, and the US. The need for cost-effective remedial action technologies for hazardous waste sites is a problem of all industrialized countries. The need to build a knowledge base of emerging remedial technologies was the impetus behind the USEPA's lead role and commitment to this pilot study
Conditioning of uranium-containing technological radioactive waste
International Nuclear Information System (INIS)
Smodis, B.; Tavcar, G.; Stepisnik, M.; Pucelj, B.
2006-01-01
Conditioning of mostly liquid uranium containing technological radioactive waste emerging from the past research activities at the Jozef Stefan Institute is described. The waste was first thoroughly characterised, then the radionuclides present solidified by appropriate chemical treatment, and the final product separated and prepared for storage in compliance with the legislation. The activities were carried out within the recently renewed Hot Cells Facility of the Jozef Stefan Institute and the overall process resulted in substantial volume reduction of the waste initially present. (author)
Advances in Computing and Information Technology : Proceedings of the Second International
Nagamalai, Dhinaharan; Chaki, Nabendu
2012-01-01
The international conference on Advances in Computing and Information technology (ACITY 2012) provides an excellent international forum for both academics and professionals for sharing knowledge and results in theory, methodology and applications of Computer Science and Information Technology. The Second International Conference on Advances in Computing and Information technology (ACITY 2012), held in Chennai, India, during July 13-15, 2012, covered a number of topics in all major fields of Computer Science and Information Technology including: networking and communications, network security and applications, web and internet computing, ubiquitous computing, algorithms, bioinformatics, digital image processing and pattern recognition, artificial intelligence, soft computing and applications. Upon a strength review process, a number of high-quality, presenting not only innovative ideas but also a founded evaluation and a strong argumentation of the same, were selected and collected in the present proceedings, ...
New trends in science and technology implications for international peace and security
International Nuclear Information System (INIS)
1991-01-01
In December 1988, the General Assembly requested the Secretary-General to follow future scientific and technological developments, especially those with potential military applications, and to evaluate their impact on international security. In resolution 43/77 A it also requested the Secretary-General to report to it at its forty-fifth session. The broad fields in which scientific and technological developments are taking place were identified as: information technology, biotechnology, materials technology, nuclear technology and space technology. These assessments were discussed by a wider group of experts at a high-level conference on ''New trends in science and technology: implications for international peace and security'', held in April 1990 in the city of Sendai, Japan. The Conference, which was attended by nearly 100 participants from over 20 countries, addressed issues of technological change and global security, new technologies and the search for security in the post-cold-war era, and national policy-making and international diplomacy in an era of rapid technological change. General approaches to technology assessment and technology trends in selected areas were also discussed. The positions taken by Member States on the subject of establishing a mechanism for technology assessment were also taken into account. The highlights of the report are summarized
AFRREV STECH: An International Journal of Science and Technology
African Journals Online (AJOL)
STECH: An International Journal of Science and Technology is a peer-reviewed journal of interdisciplinary scientific research, theories, and observations. STECH is a semi-annual publication of International Association of African Researchers and Reviewers (IAARR). The mission of this journal is to provide a platform for ...
PREFACE: 2nd International Meeting for Researchers in Materials and Plasma Technology
Niño, Ely Dannier V.
2013-11-01
These proceedings present the written contributions of the participants of the 2nd International Meeting for Researchers in Materials and Plasma Technology, 2nd IMRMPT, which was held from February 27 to March 2, 2013 at the Pontificia Bolivariana Bucaramanga-UPB and Santander and Industrial - UIS Universities, Bucaramanga, Colombia, organized by research groups from GINTEP-UPB, FITEK-UIS. The IMRMPT, was the second version of biennial meetings that began in 2011. The three-day scientific program of the 2nd IMRMPT consisted in 14 Magisterial Conferences, 42 Oral Presentations and 48 Poster Presentations, with the participation of undergraduate and graduate students, professors, researchers and entrepreneurs from Colombia, Russia, France, Venezuela, Brazil, Uruguay, Argentina, Peru, Mexico, United States, among others. Moreover, the objective of IMRMPT was to bring together national and international researchers in order to establish scientific cooperation in the field of materials science and plasma technology; introduce new techniques of surface treatment of materials to improve properties of metals in terms of the deterioration due to corrosion, hydrogen embrittlement, abrasion, hardness, among others; and establish cooperation agreements between universities and industry. The topics covered in the 2nd IMRMPT include New Materials, Surface Physics, Laser and Hybrid Processes, Characterization of Materials, Thin Films and Nanomaterials, Surface Hardening Processes, Wear and Corrosion / Oxidation, Modeling, Simulation and Diagnostics, Plasma Applications and Technologies, Biomedical Coatings and Surface Treatments, Non Destructive Evaluation and Online Process Control, Surface Modification (Ion Implantation, Ion Nitriding, PVD, CVD). The editors hope that those interested in the are of materials science and plasma technology, enjoy the reading that reflect a wide range of topics. It is a pleasure to thank the sponsors and all the participants and contributors for
Tritium processing and containment technology for fusion reactors: perspective and status
International Nuclear Information System (INIS)
Maroni, V.A.
1976-01-01
This paper reviews the status of selected tritium processing and containment technologies that will be required to support the development of the fusion energy program. Considered in order are the fuel conditioning and recycle systems, the containment and cleanup systems, the blanket processing systems, and two unique problems relating to tritium interactions in neutral beam injectors and first wall coolant circuits. The major technical problem areas appear to lie in the development of (1) high-capacity, rapid recycle plasma chamber evacuation systems; (2) large-capacity (greater than or equal to 100,000 cfm) air handling and processing systems for atmospheric detritiation; (3) tritium recovery technology for liquid lithium blanket concepts; (4) tritium compatible neutral injector systems; and (5) an overall approach to tritium handling and containment that guarantees near zero release to the environment at a bearable cost
International Conference on Mechanical Engineering and Technology
Mechanical Engineering and Technology
2012-01-01
The volume includes a set of selected papers extended and revised from the 2011 International Conference on Mechanical Engineering and Technology, held on London, UK, November 24-25, 2011. Mechanical engineering technology is the application of physical principles and current technological developments to the creation of useful machinery and operation design. Technologies such as solid models may be used as the basis for finite element analysis (FEA) and / or computational fluid dynamics (CFD) of the design. Through the application of computer-aided manufacturing (CAM), the models may also be used directly by software to create "instructions" for the manufacture of objects represented by the models, through computer numerically controlled (CNC) machining or other automated processes, without the need for intermediate drawings. This volume covers the subject areas of mechanical engineering and technology, and also covers interdisciplinary subject areas of computers, communications, control and automation...
International nuclear technology transfer
International Nuclear Information System (INIS)
Cartwright, P.; Rocchio, J.P.
1978-01-01
Light water reactors (LWRs), originally developed in the United States, became the nuclear workhorses for utilities in Europe and Japan largely because the U.S. industry was willing and able to transfer its nuclear know-how abroad. In this international effort, the industry had the encouragement and support of the U.S. governement. In the case of the boiling water reactor (BWR) the program for technology transfer was developed in response to overseas customer demands for support in building local designs and manufacturing capabilities. The principal vehicles have been technology exchange agreements through which complete engineering and manufacturing information is furnished covering BWR systems and fuel. Agreements are held with companies in Germany, Japan, Italy, and Sweden. In recent years, a comprehensive program of joint technology development with overseas manufacturers has begun. The rapidly escalating cost of nuclear research and development make it desirable to minimize duplication of effort. These joint programs provide a mechanism for two or more parties jointly to plan a development program, assign work tasks among themselves, and exchange test results. Despite a slower-than-hoped-for start, nuclear power today is playing a significant role in the economic growth of some developing countries, and can continue to do so. Roughly half of the 23 free world nations that have adopted LWRs are developing countries
International bilateral and multilateral arrangements in energy technologies
International Nuclear Information System (INIS)
1978-07-01
This document, the second report in the series, outlines current DOE international commitments under bilateral and multilateral arrangements, as of January 1, 1978. Included are bilateral agreements for cooperation in the civil uses of atomic energy with countries and international organizations, bilateral and multilateral technical exchanges in all energy technology areas, and multilateral agreements under the auspices of the International Energy Agency (IEA). In addition to outlining the terms, scope, and status of these agreements, this document describes DOE's participation in the work of the major international energy organizations. IEA, the International Atomic Energy Agency (IAEA), and the Nuclear Energy Agency (NEA). Future reports will update the status of ongoing cooperative projects and provide information on new energy R and D activities
STEM and Technology Education: International State-of-the-Art
Ritz, John M.; Fan, Szu-Chun
2015-01-01
This paper reports the perceptions of 20 international technology education scholars on their country's involvement in science, technology, engineering, and mathematics (STEM) education. Survey research was used to obtain data. It was found that the concept of STEM education is being discussed differently by nations. Some consider STEM education…
Reliability tests for reactor internals rejuvenation technology
International Nuclear Information System (INIS)
Fujimaki, Katsumi; Hitoki, Yoichi; Otsubo, Toru; Uchiyama, Junichi
1998-01-01
Structural damage due to aging degradation of LWR reactor internals has been reported in several nuclear plants. NUPEC has started a project to test the reliability of the technology for rejuvenating reactor internals which has been funded by the Ministry of International Trade and Industry (MITI) of Japan since 1995. The project follows the policy of a report that the MITI has formally issued in April 1996 summarizing the countermeasures to be considered for aging nuclear plants and equipment. This paper gives an outline of the test plans and results which are directed at preventive maintenance before damage and repair after damage for reactor internals aging degradation. The test results for the replacement methods of ICM housing and BWR core shroud have shown that the methods were reliable and the structural integrity was appropriate based on the evaluation. (author)
International Implications of Labeling Foods Containing Engineered Nanomaterials
DEFF Research Database (Denmark)
Grieger, Khara D.; Hansen, Steffen Foss; Mortensen, Ninell P.
2016-01-01
To provide greater transparency and comprehensive information to consumers regarding their purchase choices, the European Parliament and the Council have mandated via Regulation 1169/2011 that foods containing engineered nanomaterials (ENMs) be labeled. This review covers the main concerns related...... additives used for decades. We recommend that food industries and food safety authorities be more proactive in communicating with the public and consumer groups regarding the potential benefits and risks of using ENMs in foods. Efforts should be made to improve harmonization of information requirements...... between countries to avoid potential international trade barriers....
DEFF Research Database (Denmark)
Dettmann, Eva; Lacasa, Iciar Dominguez; Günther, Jutta
2016-01-01
The importance of localized related variety for international diversification of corporate technology, Regional Studies. Internationalization of research and development has increased substantially in recent years. This paper analyses the determinants of spatial distribution of foreign technologi......The importance of localized related variety for international diversification of corporate technology, Regional Studies. Internationalization of research and development has increased substantially in recent years. This paper analyses the determinants of spatial distribution of foreign...... technological activities across 96 regions in Germany. It identifies foreign technological activities by applying the cross-border ownership concept to patent applications. The main proposition is that regions with higher related variety of technological activities between sectors attract more foreign...
International technology transfer for climate change mitigation and the cases of Russia and China
International Nuclear Information System (INIS)
Martinot, E.; Sinton, J.E.
1997-01-01
The environmental agenda for mitigating climate change through international transfers of technology is linked with a diverse literature, reviewed here within a framework that combines technological, agent/agenda, and market/transaction perspectives. Literature that bears on international technology transfer for climate change mitigation is similar in many ways for Russia and China: opportunities for energy efficiency and renewable energy, economic reform and restructuring, the difficulties enterprises face in responding to market conditions, international assistance policies, international joint ventures, market intermediation, and capacity building for market development. In both countries, capacity building means enhancing market-oriented capabilities in addition to technological capabilities. For Russia, institutional development is critical, such as new commercial legal codes and housing-sector changes beyond privatization. For China, technology policies and modernization programs significantly influence technology transfers. 234 refs., 3 tabs
International technology transfer for climate change mitigation and the cases of Russia and China
Energy Technology Data Exchange (ETDEWEB)
Martinot, E. [Univ. of California, Berkeley, CA (United States). Energy and Resources Group]|[Stockholm Environment Inst., Boston, MA (United States); Sinton, J.E. [Univ. of California, Berkeley, CA (United States). Energy and Resources Group]|[Lawrence Berkeley National Lab., CA (United States). International Energy Studies Group; Haddad, B.M. [Univ. of California, Berkeley, CA (United States)
1997-12-31
The environmental agenda for mitigating climate change through international transfers of technology is linked with a diverse literature, reviewed here within a framework that combines technological, agent/agenda, and market/transaction perspectives. Literature that bears on international technology transfer for climate change mitigation is similar in many ways for Russia and China: opportunities for energy efficiency and renewable energy, economic reform and restructuring, the difficulties enterprises face in responding to market conditions, international assistance policies, international joint ventures, market intermediation, and capacity building for market development. In both countries, capacity building means enhancing market-oriented capabilities in addition to technological capabilities. For Russia, institutional development is critical, such as new commercial legal codes and housing-sector changes beyond privatization. For China, technology policies and modernization programs significantly influence technology transfers. 234 refs., 3 tabs.
Breaking the impasse in the international climate negotiations: The potential of green technologies
International Nuclear Information System (INIS)
Schreurs, Miranda A.
2012-01-01
The slow pace of progress in the international climate negotiations is contrasted by the dynamic changes occurring on the ground as competition among countries for green technology leadership heats up. China, Germany, Japan, and the United States all exhibit interest in being green technology leaders although the United States could fall behind due to lack of strong federal government support for climate action. - Highlights: ► International competition for green technology and energy leadership. ► Green energy technology policy in China, Germany, Japan, and the United States. ► Dealing with the international stalemate in the climate negotiations.
Language learning and the technology of international communications
Batley, Edward
1991-03-01
The author posits a reciprocal relationship between the recent popularisation of computer-based technology and the democratisation of Central and Eastern Europe. Brief reference is made to their common denominator, language and language change. The advent of the communicative approach to language learning and the new wave of language authenticity arising from it, both enhanced by the technological revolution, have made the defining of acceptability in the classroom and of communication in the process of testing more problematic than ever, although several advantages have also accrued. Advances in technology have generally outstripped our ability to apply their full or characteristic potential. While technology can personalise learning and in this way make learning more efficient, it can also impede motivation. Old methods, drills and routines are tending to be sustained by it. Lack of technology can also widen the gulf between developed, developing and underdeveloped countries of the world. The author proposes international partnerships as a means of preventing an imbalance which could threaten stability. Single language dominance is another threat to international understanding, given the growing awareness of our multilingual and multicultural environment. Enlightened language policies reaching from the individual to beyond the national community are needed, which adopt these aspects of language learning, explain decisions about the state's choice of languages and, at the same time, promote individual choice wherever practicable.
Final report. CIRP seminar on micro and nano technology. November 2003
DEFF Research Database (Denmark)
Hansen, Hans Nørgaard; Alting, Leo
This final reports contains a description of the 1st international CIRP seminar on micro and nano technology held at DTU in November 2003.......This final reports contains a description of the 1st international CIRP seminar on micro and nano technology held at DTU in November 2003....
Shuja Syed, Ahmed
2013-12-01
The 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies (ICSICCST-2013), took place in Karachi, Pakistan, from 24-26 June 2013. It was organized by Indus University, Karachi, in collaboration with HEJ Research Institute of Chemistry, University of Karachi, Karachi. More than 80 abstracts were submitted to the conference and were double blind-reviewed by an international scientific committee. The topics of the Conference were: Video, Image & Voice Sensing Sensing for Industry, Environment, and Health Automation and Controls Laser Sensors and Systems Displays for Innovative Applications Emerging Technologies Unmanned, Robotic, and Layered Systems Sensing for Defense, Homeland Security, and Law Enforcement The title of the conference, 'Sensing for Industry, Control, Communication & Security Technologies' is very apt in capturing the main issues facing the industry of Pakistan and the world. We believe the sensing industry, particularly in Pakistan, is currently at a critical juncture of its development. The future of the industry will depend on how the industry players choose to respond to the challenge of global competition and opportunities arising from strong growth in the Asian region for which we are pleased to note that the conference covered a comprehensive spectrum of issues with an international perspective. This will certainly assist industry players to make informed decisions in shaping the future of the industry. The conference gathered qualified researchers from developed countries like USA, UK, Sweden, Saudi Arabia, China, South Korea and Malaysia etc whose expertise resulting from the research can be drawn upon to build an exploitable area of new technology that has potential Defense, Homeland Security, and Military applicability. More than 250 researchers/students attended the event and made the event great success as the turnout was 100%. An exceptional line-up of speakers spoke at the occasion. We want
Proceedings of the 2. international conference on containment design and operation. Vol. 1,2
Energy Technology Data Exchange (ETDEWEB)
Lawrence, S R
1991-12-31
The second international conference on containment design and operation included sessions on the following topics: plenary; commissioning and operation; regulatory and performance requirements; reliability, risk and severe accident evaluation; future containment systems; severe accident evaluation; activity transport experiments; activity transport analysis; containment design; future and filtered vent containment systems; containment response; hydrogen combustion. Due prominence was given to CANDU and other PHWR reactors, and to Canadian experiments. The individual papers have been abstracted separately.
International Energy: Subject Thesaurus. Revision 1
Energy Technology Data Exchange (ETDEWEB)
1993-11-01
The International Energy Agency: Subject Thesaurus contains the standard vocabulary of indexing terms (descriptors) developed and structured to build and maintain energy information databases. Involved in this cooperative task are (1) the technical staff of the USDOE Office of Scientific and Technical Information (OSTI) in cooperation with the member countries of the International Energy Agency`s Energy Technology Data Exchange (ETDE) and (2) the International Atomic Energy Agency`s International Nuclear Information System (INIS) staff representing the more than 100 countries and organizations that record and index information for the international nuclear information community. ETDE member countries are also members of INIS. Nuclear information prepared for INIS by ETDE member countries is included in the ETDE Energy Database, which contains the online equivalent of the printed INIS Atomindex. Indexing terminology is therefore cooperatively standardized for use in both information systems. This structured vocabulary reflects thscope of international energy research, development, and technological programs. The terminology of this thesaurus aids in subject searching on commercial systems, such as ``Energy Science & Technology`` by DIALOG Information Services, ``Energy`` by STN International and the ``ETDE Energy Database`` by SilverPlatter. It is also the thesaurus for the Integrated Technical Information System (ITIS) online databases of the US Department of Energy.
3. International Symposium 'Vacuum Technology and Equipment'. ISVTE-3
International Nuclear Information System (INIS)
Kogan, V.S.; Shulaev, V.M.
1999-01-01
The reports of the 3th International Symposium 'Vacuum Technology and Equipment', which was held in Kharkov at 22-24 September 1999 are presented. In this issue such subject are published: equipment and technology for thin and coating preparation. Studies of their surface layer and material modification by corpuscular effect and light
Directory of Open Access Journals (Sweden)
Rafael Padilla-Vega
2017-01-01
Full Text Available This paper reviews a research conducted on mobile technology adoption in the international business trade. Accordingly factors were adopted from the framework technology-organization-environment TOE with a set of future research proposals in order to support the suggested model. The paper recommends seven 7 implementation factors that may determine the decision for adopting mobile technology in the international business. These factors have been categorized into the three dimensions of the TOE framework external task amp environment organizational and technological. The results of the investigation revealed that the modern technology supports the efficiency of the business reduce the internal process consuming time and increase communication. On the other hand supports the integration in the long-distance relations.
2010-09-29
... 25, 2010, applicable to workers of International Business Machines (IBM), Global Technology Services... hereby issued as follows: All workers of International Business Machines (IBM), Global Technology... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,164] International Business...
Reliability tests for reactor internals replacement technology
International Nuclear Information System (INIS)
Fujimaki, K.; Uchiyama, J.; Ohtsubo, T.
2000-01-01
Structural damage due to aging degradation of LWR reactor internals has been reported in several nuclear plants. NUPEC has started a project to test the reliability of the technology for replacing reactor internals, which was directed at preventive maintenance before damage and repair after damage for the aging degradation. The project has been funded by the Ministry of International Trade and Industry (MITI) of Japan since 1995, and it follows the policy of a report that the MITI has formally issued in April 1996 summarizing the countermeasures to be considered for aging nuclear plants and equipment. This paper gives an outline of the whole test plans and the test results for the BWR reactor internals replacement methods; core shroud, ICM housing, and CRD Housing and stub tube. The test results have shown that the methods were reliable and the structural integrity was appropriate based on the evaluation. (author)
Transition to chaos in a square enclosure containing internal heat sources
Energy Technology Data Exchange (ETDEWEB)
Baytas, A.C. [Institute For Nuclear Energy, Istanbul (Turkey)
1995-09-01
A numerical investigation is performed to study the transition from steady to chaotic flow of a fluid confined in a two-dimensional square cavity. The cavity has rigid walls of constant temperature containing uniformly distributed internal heat source. Effects of the Rayleigh number of flow and heat transfer rates are studied. In addition to, same problem is solved for sinusoidally changing internal heat source to show its effect on the flow model and heat transfer of the enclosures. Details of oscillatory solutions and flow bifurcations are presented.
Proceedings of the third international conference on containment design and operation. v.1
Energy Technology Data Exchange (ETDEWEB)
NONE
1994-12-31
The second international conference on containment design and operation included sessions on the following topics: performance and regulatory requirements; radionuclide behaviour; severe accident design and analysis; operation, maintenance, leaking and aging of containment systems; thermal hydraulic behaviour of containment systems; hydrogen mixing and mitigation; design methods and concepts; code validation; structural analysis and response tests; passive safety systems; aerosol behaviour; containment reliability, integrity, and risk assessment; hydrogen deflagration and detonation. Due prominence was given to CANDU and other PHWR reactors. The individual papers have been abstracted separately.
Proceedings of the third international conference on containment design and operation. v.1
International Nuclear Information System (INIS)
1994-01-01
The second international conference on containment design and operation included sessions on the following topics: performance and regulatory requirements; radionuclide behaviour; severe accident design and analysis; operation, maintenance, leaking and aging of containment systems; thermal hydraulic behaviour of containment systems; hydrogen mixing and mitigation; design methods and concepts; code validation; structural analysis and response tests; passive safety systems; aerosol behaviour; containment reliability, integrity, and risk assessment; hydrogen deflagration and detonation. Due prominence was given to CANDU and other PHWR reactors. The individual papers have been abstracted separately
Bonded or Unbonded Technologies for Nuclear Reactor Prestressed Concrete Containments
International Nuclear Information System (INIS)
Abrishami, Homayoun; Tcherner, Julia; Barre, Francis; Borgerhoff, Michael; Bumann, Urs; Calonius, Kim; Courtois, Alexis; Debattista, Jean-Marc; Gallitre, Etienne; Isard, Cedric; Elison, Oscar; Graves, Herman; Sircar, Madhumita; Huerta, Alejandro; White, Andrew; ); Jackson, Paul; Kjellin, Daniel; Lillhoek, Sofia; Louhivirta, Jari; Myllymaeki, Jukka; Vaelikangas, Pekka; Martin, Jose; Nakano, Makio; Puttonen, Jari; Rambach, Jean-Mathieu; Tarallo, Francois; Smith, Leslie; Stepan, Jan; Touret, Jean-Pierre; Varpasuo, Pentti
2015-01-01
OECD/NEA/CSNI Working Group on Integrity and Ageing of Components and Structures (WGIAGE) has the main mission to advance the current understanding of those aspects relevant to ensuring the integrity of structures, systems and components under design and beyond design loads, to provide guidance in choosing the optimal ways of dealing with challenges to the integrity of operating as well as new nuclear power plants, and to make use of an integrated approach to design, safety and plant life management. The work related to the risks of the loss of pre-stressing force in concrete structures has been in high priority during the activities of the concrete sub-group of WGIAGE. Therefore, the CAPS of WGIAGE: Study on post-tensioning methodologies in containments, was approved by CSNI in June 2009. In this study the two post-tensioning methodologies: bonded and un-bonded methods and their technological features are analysed. In the bonded technology, the tendon cannot slide in its duct due to the cement grouting which is injected after tensioning. In the un-bonded technology, the tendon can slide inside its duct, the corrosion protection is given by grease, wax or dry air. A key point concerning the assessment of durability and safety of prestressed concrete containments is the technology chosen for tendon protection: bonded with cement grout or un-bonded and protected by grease or soft products. The mechanical behaviour of the containment is directly influenced by the adherence of the tendons to the concrete, locally and under high stresses in case of severe accident. The bonded or un-bonded tendons of post-tensioned concrete containment of the Nuclear Power Plants have the major role of containment (balance of the pressure effect during design basis and beyond design accident). Many difficulties around the design, the construction and the in service inspection are related to the tendons. The main goal of the CAPS work was to clarify the consequences and necessary
Contaminant plumes containment and remediation focus area. Technology summary
International Nuclear Information System (INIS)
1995-06-01
EM has established a new approach to managing environmental technology research and development in critical areas of interest to DOE. The Contaminant Plumes Containment and Remediation (Plumes) Focus Area is one of five areas targeted to implement the new approach, actively involving representatives from basic research, technology implementation, and regulatory communities in setting objectives and evaluating results. This document presents an overview of current EM activities within the Plumes Focus Area to describe to the appropriate organizations the current thrust of the program and developing input for its future direction. The Plumes Focus Area is developing remediation technologies that address environmental problems associated with certain priority contaminants found at DOE sites, including radionuclides, heavy metals, and dense non-aqueous phase liquids (DNAPLs). Technologies for cleaning up contaminants of concern to both DOE and other federal agencies, such as volatile organic compounds (VOCs), polychlorinated biphenyls (PCBs), and other organics and inorganic compounds, will be developed by leveraging resources in cooperation with industry and interagency programs
Contaminant plumes containment and remediation focus area. Technology summary
Energy Technology Data Exchange (ETDEWEB)
NONE
1995-06-01
EM has established a new approach to managing environmental technology research and development in critical areas of interest to DOE. The Contaminant Plumes Containment and Remediation (Plumes) Focus Area is one of five areas targeted to implement the new approach, actively involving representatives from basic research, technology implementation, and regulatory communities in setting objectives and evaluating results. This document presents an overview of current EM activities within the Plumes Focus Area to describe to the appropriate organizations the current thrust of the program and developing input for its future direction. The Plumes Focus Area is developing remediation technologies that address environmental problems associated with certain priority contaminants found at DOE sites, including radionuclides, heavy metals, and dense non-aqueous phase liquids (DNAPLs). Technologies for cleaning up contaminants of concern to both DOE and other federal agencies, such as volatile organic compounds (VOCs), polychlorinated biphenyls (PCBs), and other organics and inorganic compounds, will be developed by leveraging resources in cooperation with industry and interagency programs.
Treatment technology analysis for mixed waste containers and debris
International Nuclear Information System (INIS)
Gehrke, R.J.; Brown, C.H.; Langton, C.A.; Askew, N.M.; Kan, T.; Schwinkendorf, W.E.
1994-03-01
A team was assembled to develop technology needs and strategies for treatment of mixed waste debris and empty containers in the Department of Energy (DOE) complex, and to determine the advantages and disadvantages of applying the Debris and Empty Container Rules to these wastes. These rules issued by the Environmental Protection Agency (EPA) apply only to the hazardous component of mixed debris. Hazardous debris that is subjected to regulations under the Atomic Energy Act because of its radioactivity (i.e., mixed debris) is also subject to the debris treatment standards. The issue of treating debris per the Resource Conservation and Recovery Act (RCRA) at the same time or in conjunction with decontamination of the radioactive contamination was also addressed. Resolution of this issue requires policy development by DOE Headquarters of de minimis concentrations for radioactivity and release of material to Subtitle D landfills or into the commercial sector. The task team recommends that, since alternate treatment technologies (for the hazardous component) are Best Demonstrated Available Technology (BDAT): (1) funding should focus on demonstration, testing, and evaluation of BDAT on mixed debris, (2) funding should also consider verification of alternative treatments for the decontamination of radioactive debris, and (3) DOE should establish criteria for the recycle/reuse or disposal of treated and decontaminated mixed debris as municipal waste
Technology for Education and Learning
2012 international conference on Technology for Education and Learning (ICTEL 2012)
2012-01-01
This volume contains 108 selected papers presented at the 2012 international conference on Technology for Education and Learning (ICTEL 2012), Macau, China, March 1-2, 2012. The conference brought together researchers working in various different areas of Technology for Education and Learning with a main emphasis on technology for business and economy in order to foster international collaborations and exchange of new ideas. This proceedings book has its focus on Technology for Economy, Finance and Education representing some of the major subareas presented at the conference.
Review of the book, International handbook of research and development in Technology Education
Householder, Dan L.
2012-01-01
This is by far the most comprehensive volume yet issued by Sense Publishers in their excellent contemporary series, International Technology Education Studies. Earlier books in the series are the International Handbook of Technology Education: Reviewing the Past Twenty Years, edited by Marc J. de Vries and Ilja Mottier (2006); Analyzing Best Practices in Technology Education, edited by Marc de Vries, Rod Custer, John Dakers, and Gene Martin (2007); Researching Technology Education, edited by ...
Oren, Meir
2004-11-01
The world now faces the dreadful possibility of biological weapons attacks by terrorists. Healthcare systems would have to cope with such emergencies should all preemptive measures fail. Information gained from the Global Mercury exercise and the SARS outbreak has shown that containing an outbreak at the start is more effective than reacting to it once it has spread and that containment should be treated both nationally and internationally. On the national level this entails developing rapid and effective methods to detect and identify infected cases, and implementing isolation and control measures to lower the risk of further transmission of the disease while assuring the safety of medical teams and laboratory workers. Strategic contingency plans should incorporate well-defined procedures for hospitalization and isolation of patients, providing regional backup of medical personnel and equipment and maintaining close cooperation between the various bodies in the healthcare system. Quarantine is an effective containment measure, especially if voluntarily imposed. Modern communication systems can help by sending professional teams timely instructions and providing the public with information to reduce panic and stress during quarantine procedures. Informing the public poses a dilemma: finding a balance between giving advance warning of an imminent epidemic outbreak and ascertaining the likelihood of its occurrence. Containment of international bioterrorist attacks depends entirely on close international cooperation to implement national and international strategic contingency plans with free exchange of information and recognition of procedures.
Directory of Open Access Journals (Sweden)
Édison Renato Silva
2014-12-01
Full Text Available The expectation that technological returns from defense expenditure through acquisition, international cooperation and domestic research would further national development underappreciates the different technological dynamic of the armed services. This paper outlines the technological dynamic the stems from fighting in the air, at sea and on land, exemplifying consequences for the case of acquisition.
Multi-purpose container technologies for spent fuel management
International Nuclear Information System (INIS)
2000-12-01
The management of spent nuclear fuel is an integral part of the nuclear fuel cycle. Spent fuel management resides in the back end of the fuel cycle, and is not revenue producing as electric power generation is. It instead results in a cost associated power generation. It is a major consideration in the nuclear power industry today. Because technologies, needs and circumstances vary from country to country, there is no single, standardized approach to spent fuel management. The projected cumulative amount of spent fuel generated worldwide by 2010 will be 330 000 t HM. When reprocessing is accounted for, that amount is likely to be reduced to 215 000 t HM, which is still more than twice as much as the amount now in storage. Considering the limited capacity of at-reactor (AR) storage, various technologies are being developed for increasing storage capacities. At present, many countries are developing away-from-reactor (AFR) storage in the form of pool storage or as dry storage. Further these AFR storage systems may be at-reactor sites or away-from-reactor sites (e.g. centrally located interim storage facilities, serving several reactors). The dry storage technologies being developed are varied and include vaults, horizontal concrete modules, concrete casks, and metal casks. The review of the interim storage plans of several countries indicates that the newest approaches being pursued for spent fuel management use dual-purpose and multi-purpose containers. These containers are envisaged to hold several spent fuel assemblies, and be part of the transport, storage, and possibly geological disposal systems of an integrated spent fuel management system
International Conference on Information and Communication Technology for Sustainable Development
Joshi, Amit; Modi, Nilesh; Pathak, Nisarg
2016-01-01
The two volumes of this book collect high-quality peer-reviewed research papers presented in the International Conference on ICT for Sustainable Development (ICT4SD 2015) held at Ahmedabad, India during 3 – 4 July 2015. The book discusses all areas of Information and Communication Technologies and its applications in field for engineering and management. The main focus of the volumes are on applications of ICT for Infrastructure, e-Governance, and contemporary technologies advancements on Data Mining, Security, Computer Graphics, etc. The objective of this International Conference is to provide an opportunity for the researchers, academicians, industry persons and students to interact and exchange ideas, experience and expertise in the current trend and strategies for Information and Communication Technologies.
International Linear Collider Steering Committee issues charge to Technology Recommendation Panel
2003-01-01
"Following its November 19 meeting in Paris, the International Linear Collider Steering Committee, a subcommittee of the International Committee for Future Accelerators, has published the charge http://www.fnal.gov/directorate/icfa/ITRP_Charge.pdf to the International Technology Recommendation Panel appointed by ICFA" (2 paragraphs).
Strengthened International Nuclear Safeguards; burdens and Effects on Nuclear Technology Development
International Nuclear Information System (INIS)
Badawy, I.
2000-01-01
The present paper deals with the recent direction of strengthening the international nuclear safeguards and the effects on the development of nuclear technology for peaceful applications. The new basic principles for strengthening the international nuclear control in the direction of undeclared nuclear activities are elaborated, and the national obligations are indicated. The burdens on the development of nuclear technology are discussed. Approaches are proposed in this work for coping with the present and future situations
Fusion Technologies: 2nd Karlsruhe International Summer School
International Nuclear Information System (INIS)
Bahm, W.
2008-01-01
Nuclear fusion promises to deliver a future non-polluting energy supply with nearly unlimited fuel reserves. To win young scientists and engineers for nuclear fusion, the Karlsruhe Research Center, together with other partners in the European Fusion Education Network being established by the European Commission, organizes the 2nd Karlsruhe International Summer School on Fusion Technologies on September 1-12, 2008. The program covers all key technologies necessary for construction and operation of a fusion reactor. (orig.)
Proceedings of the third international conference on containment design and operation. v.2
International Nuclear Information System (INIS)
1994-01-01
The third international conference on containment design and operation includes in volume 2 of the publication sessions on the following topics: structural analysis and response tests; passive safety systems; aerosol behaviour; containment reliability, integrity, and risk assessment; hydrogen deflagration and detonation. Due prominence was given to CANDU and other PHWR reactors. The individual papers have been abstracted separately
Proceedings of the third international conference on containment design and operation. v.2
Energy Technology Data Exchange (ETDEWEB)
NONE
1994-12-31
The third international conference on containment design and operation includes in volume 2 of the publication sessions on the following topics: structural analysis and response tests; passive safety systems; aerosol behaviour; containment reliability, integrity, and risk assessment; hydrogen deflagration and detonation. Due prominence was given to CANDU and other PHWR reactors. The individual papers have been abstracted separately.
Roles of concrete technology for containment of radioactive contaminants
International Nuclear Information System (INIS)
Kitsutaka, Yoshinori; Imamoto, Keiichi
2014-01-01
A large amount of radioactive materials was emitted in the environment by the reactor accident at Fukushima Daiichi Nuclear Power Plant. Nuclear debris still remains in the reactor container. An investigative committee was organized in Japan Concrete Institute to study on the containment of radioactive materials and the safe utilization of concrete materials. We have investigated the effect of the hydrogen explosion upon the property of concrete and the transfer of materials into the concrete. We also present the outline of the advice made by Japan Concrete Institute about technologies on the concrete materials for the waterproofing in buildings and for water-shielding walls. (J.P.N.)
9th International Conference on Advanced Computing & Communication Technologies
Mandal, Jyotsna; Auluck, Nitin; Nagarajaram, H
2016-01-01
This book highlights a collection of high-quality peer-reviewed research papers presented at the Ninth International Conference on Advanced Computing & Communication Technologies (ICACCT-2015) held at Asia Pacific Institute of Information Technology, Panipat, India during 27–29 November 2015. The book discusses a wide variety of industrial, engineering and scientific applications of the emerging techniques. Researchers from academia and industry present their original work and exchange ideas, information, techniques and applications in the field of Advanced Computing and Communication Technology.
Energy Technology Data Exchange (ETDEWEB)
Roy C. Herndon
2001-02-28
Cooperative Agreement (DE-FC21-95EW55101) between the U.S. Department of Energy (DOE) and the Florida State University's Institute for International Cooperative Environmental Research (IICER) was designed to facilitate a number of joint programmatic goals of both the DOE and the IICER related to international technology identification, development, demonstration and deployment using a variety of mechanisms to accomplish these goals. These mechanisms included: laboratory and field research; technology demonstrations; international training and technical exchanges; data collection, synthesis and evaluation; the conduct of conferences, symposia and high-level meetings; and other appropriate and effective approaches. The DOE utilized the expertise and facilities of the IICER at Florida State University to accomplish its goals related to this cooperative agreement. The IICER has unique and demonstrated capabilities that have been utilized to conduct the tasks for this cooperative agreement. The IICER conducted activities related to technology identification, development, evaluation, demonstration and deployment through its joint centers which link the capabilities at Florida State University with collaborating academic and leading research institutions in the major countries of Central and Eastern Europe (e.g., Czech Republic, Hungary, Poland) and Russia. The activities and accomplishments for this five-year cooperative agreement are summarized in this Final Technical Report.
International Conference of Applied Science and Technology for Infrastructure Engineering
Elvina Santoso, Shelvy; Hardianto, Ekky
2017-11-01
Preface: International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017. The International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017 has been scheduled and successfully taken place at Swiss-Bell Inn Hotel, Surabaya, Indonesia, on August 5th 2017 organized by Department of Civil Infrastructure Engineering, Faculty of Vocation, Institut Teknologi Sepuluh Nopember (ITS). This annual event aims to create synergies between government, private sectors; employers; practitioners; and academics. This conference has different theme each year and “MATERIAL FOR INFRASTUCTURE ENGINEERING” will be taken for this year’s main theme. In addition, we also provide a platform for various other sub-theme topic including but not limited to Geopolymer Concrete and Materials Technology, Structural Dynamics, Engineering, and Sustainability, Seismic Design and Control of Structural Vibrations, Innovative and Green Buildings, Project Management, Transportation and Highway Engineering, Geotechnical Engineering, Water Engineering and Resources Management, Surveying and Geospatial Engineering, Coastal Engineering, Geophysics, Energy, Electronic and Mechatronic, Industrial Process, and Data Mining. List of Organizers, Journal Editors, Steering Committee, International Scientific Committee, Chairman, Keynote Speakers are available in this pdf.
Nagamalai, Dhinaharan; Chaki, Nabendu
2013-01-01
The international conference on Advances in Computing and Information technology (ACITY 2012) provides an excellent international forum for both academics and professionals for sharing knowledge and results in theory, methodology and applications of Computer Science and Information Technology. The Second International Conference on Advances in Computing and Information technology (ACITY 2012), held in Chennai, India, during July 13-15, 2012, covered a number of topics in all major fields of Computer Science and Information Technology including: networking and communications, network security and applications, web and internet computing, ubiquitous computing, algorithms, bioinformatics, digital image processing and pattern recognition, artificial intelligence, soft computing and applications. Upon a strength review process, a number of high-quality, presenting not only innovative ideas but also a founded evaluation and a strong argumentation of the same, were selected and collected in the present proceedings, ...
1st International School of Fusion Reactor Technology "Ettore Majorana"
Knoepfel, Heinz; Safety, Environmental Impact and Economic Prospects of Nuclear Fusion
1990-01-01
This book contains the lectures and the concluding discussion of the "Seminar on Safety, Environmental Impact, and Economic Prospects of Nuclear Fusion", which was held at Erice, August 6-12, 1989. In selecting the contributions to this 9th meeting held by the International School of Fusion Reactor Technology at the E. Majorana Center for Scientific Cul ture in Erice, we tried to provide a comprehensive coverage of the many interre lated and interdisciplinary aspects of what ultimately turns out to be the global acceptance criteria of our society with respect to controlled nuclear fusion. Consequently, this edited collection of the papers presented should provide an overview of these issues. We thus hope that this book, with its extensive subject index, will also be of interest and help to nonfusion specialists and, in general, to those who from curiosity or by assignment are required to be informed on these as pects of fusion energy.
REPORT ON THE INTERNATIONAL CENTRE FOR GAS TECHNOLOGY INFORMATION'S 2002 ACCOMPLISHMENTS
Energy Technology Data Exchange (ETDEWEB)
Mary Lang
2003-03-01
This is the final technical report for the U.S. Department of Energy Grant DE-FG26-02NT41445 for Membership in the International Centre for Gas Technology Information. The grant period began January 1, 2002 and ended December 31, 2002. The primary purpose of this grant was to continue U.S. country membership in the International Energy Agency's International Centre for Gas Technology Information (ICGTI) for calendar year 2002. The mission of ICGTI is to promote international cooperation and collaboration on natural gas technology development and commercialization. This final technical report describes ICGTI's 2002 activities, in which U.S. country membership in ICGTI was sustained and supported, but ICGTI's activities were curtailed by loss of funding.
Underground reactor containments: An option for the future?
International Nuclear Information System (INIS)
Forsberg, C.W.; Kress, T.
1997-01-01
Changing world conditions and changing technologies suggest that serious consideration should be given to siting of nuclear power plants underground. Underground siting is not a new concept. Multiple research reactors, several weapons production reactors, and one power reactor have been built underground. What is new are the technologies and incentives that may now make underground siting a preferred option. The conditions and technologies, along with their implications, are discussed herein. Underground containments can be constructed in mined cavities or pits that are then backfilled with thick layers of rock and soil. Conventional above-ground containments resist assaults and accidents because of the strength of their construction materials and the effectiveness of their safety features that are engineered to reduce loads. However, underground containments can provide even more resistance to assaults and accidents because of the inertia of the mass of materials over the reactor. High-technology weapons or some internal accidents can cause existing strong-material containments to fail, but only very-high energy releases can move large inertial masses associated with underground containments. New methods of isolation may provide a higher confidence in isolation that is independent of operator action
3rd International Conference on Computer & Communication Technologies
Bhateja, Vikrant; Raju, K; Janakiramaiah, B
2017-01-01
The book is a compilation of high-quality scientific papers presented at the 3rd International Conference on Computer & Communication Technologies (IC3T 2016). The individual papers address cutting-edge technologies and applications of soft computing, artificial intelligence and communication. In addition, a variety of further topics are discussed, which include data mining, machine intelligence, fuzzy computing, sensor networks, signal and image processing, human-computer interaction, web intelligence, etc. As such, it offers readers a valuable and unique resource.
Energy Technology Data Exchange (ETDEWEB)
Heckler, H.
2007-07-01
The foreign-language vocabulary taught at school usually does not cover terms needed during professional life in electrical engineering. This comprehensive dictionary contains more than 60,000 electrotechnical and engineering terms - used in textbooks, manuals, data sheets, whitepapers and international standards. British English and American English spelling differences are identified. Terms used in IEC standards of the International Electrotechnical Commission are marked, allowing the reader to have easy access to the multilingual glossary of the IEC. This book contains the in-house dictionaries of the internationally operating companies Festo, KEB, Phoenix Contact, and Rittal. Topics: - Basic of electrical engineering, - Electrical power engineering, - Mechatronics, - Electrical drive engineering, - Electrical connection technology, - Automation technology, - Safety-related technology, - Information technology, - Measurement and control technology, - Explosion protection - Power plant technology, - Lightning and overvoltage protection. (orig.)
2011-11-03
... FEDERAL TRADE COMMISSION [File No. 111 0097] Healthcare Technology Holdings, Inc.; Analysis of... Technology Holdings, Inc. (``Healthcare Technology''), subject to final approval, an Agreement Containing... Healthcare Technology's proposed acquisition of SDI Health LLC (``SDI'') from SDI Health Holdings LLC (``SDI...
Stakeholder identification of advanced technology opportunities at international ports of entry
Energy Technology Data Exchange (ETDEWEB)
Parker, S.K. [Sandia National Labs., Albuquerque, NM (United States). Energy Policy and Planning Dept.; Icerman, L. [Icerman and Associates, Santa Fe, NM (United States)
1997-01-01
As part of the Advanced Technologies for International and Intermodal Ports of Entry (ATIPE) Project, a diverse group of stakeholders was engaged to help identify problems experienced at inland international border crossings, particularly those at the US-Mexican border. The fundamental issue at international ports of entry is reducing transit time through the required documentation and inspection processes. Examples of other issues or problems, typically manifested as time delays at border crossings, repeatedly mentioned by stakeholders include: (1) lack of document standardization; (2) failure to standardize inspection processes; (3) inadequate information and communications systems; (4) manual fee and tariff collection; (5) inconsistency of processes and procedures; and (6) suboptimal cooperation among governmental agencies. Most of these issues can be addressed to some extent by the development of advanced technologies with the objective of allowing ports of entry to become more efficient while being more effective. Three categories of technologies were unambiguously of high priority to port of entry stakeholders: (1) automated documentation; (2) systems integration; and (3) vehicle and cargo tracking. Together, these technologies represent many of the technical components necessary for pre-clearance of freight approaching international ports of entry. Integration of vehicle and cargo tracking systems with port of entry information and communications systems, as well as existing industry legacy systems, should further enable border crossings to be accomplished consistently with optimal processing times.
4th International Conference on Sustainable Automotive Technologies
Wellnitz, Jörg; Leary, Martin; Koopmans, Lucien
2012-01-01
The book on Sustainable Automotive Technologies aims to draw special attention to the research and practice focused on new technologies and approaches capable of meeting the challenges to sustainable mobility. In particular, the book features incremental and radical technical advancements that are able to meet social, economic and environmental targets in both local and global contexts. These include original solutions to the problems of pollution and congestion, vehicle and public safety, sustainable vehicle design and manufacture, new structures and materials, new power-train technologies and vehicle concepts. In addition to vehicle technologies, the book is also concerned with the broader systemic issues such as sustainable supply chain systems, integrated logistics and telematics, and end-of-life vehicle management. It captures selected peer reviewed papers accepted for presentation at the 4th International Conference on Sustainable Automotive Technologies, ICSAT2012, held at the RMIT, Melbourne, Australi...
International Nuclear Information System (INIS)
Cameron, C.P.; Bleck, M.E.
1980-12-01
Concepts for containment/surveillance for reprocessing plants are described, conceptual designs are developed, and their effectiveness is evaluated. A technical approach to design of containment/surveillance systems is presented, and design considerations are discussed. This is the second in a series of reports. The first described the basis for the study of international safeguards for reprocessing plants. In this second report, only containment/surveillance is discussed. The third report will discuss the integration of concepts for containment/surveillance and material accountancy
International Nuclear Information System (INIS)
Henderson, R.R.
1987-01-01
This paper will explore methods that have been effective in accomplishing broad-based technology transfer relationships between international commercial nuclear organizations, and have enhanced the benefits from such relationships through mutual participation in the development of new technology. The factors involved in accomplishing technology transfer will be examined based on the 25 years of Westinghouse experience in establishing successful nuclear technology relationships with over 20 different associates world-wide. This will include information pertaining to organization, training, consultation, technical information transmission, and other important aspects of technology transfer. Additionally, the methodology of enhancing and increasing the benefits of technology transfer through cooperative development programs as produced and promoted by Weatinghouse with its associates will be examined. This will include reviews of several significant copperative programs, such as the programs for the Advanced Pressurized Water Reactor and the Integrated Protection and Control Systems for future plants. (author)
International Nuclear Information System (INIS)
Henderson, R.R.
1988-01-01
This paper will explore methods that have been effective in accomplishing broad-based technology transfer relationships between international commercial nuclear organizations, and have enhanced the benefits from such relationships through mutual participation in the development of new technology. The factors involved in accomplishing technology transfer will be examined based on the 25 years of Westinghouse experience in establishing successful nuclear technology relationships with over 20 different associates world-wide. This will include information pertaining to organization, training, consultation, technical information transmission, and other important aspects of technology transfer. Additionally, the methodology of enhancing and increasing the benefits of technology transfer through cooperative development programs as produced and promoted by Westinghouse with its associates will be examined. This will include reviews of several significant cooperative programs, such as the programs for the Advanced Pressurized Water Reactor and the Integrated Protection and Control Systems for future plants
Mixed Waste Integrated Program: A technology assessment for mercury-containing mixed wastes
International Nuclear Information System (INIS)
Perona, J.J.; Brown, C.H.
1993-03-01
The treatment of mixed wastes must meet US Environmental Protection Agency (EPA) standards for chemically hazardous species and also must provide adequate control of the radioactive species. The US Department of Energy (DOE) Office of Technology Development established the Mixed Waste Integrated Program (MWIP) to develop mixed-waste treatment technology in support of the Mixed Low-Level Waste Program. Many DOE mixed-waste streams contain mercury. This report is an assessment of current state-of-the-art technologies for mercury separations from solids, liquids, and gases. A total of 19 technologies were assessed. This project is funded through the Chemical-Physical Technology Support Group of the MWIP
International Drug Discovery Science and Technology--BIT's Seventh Annual Congress.
Bodovitz, Steven
2010-01-01
BIT's Seventh Annual International Drug Discovery Science and Technology Congress, held in Shanghai, included topics covering new therapeutic and technological developments in the field of drug discovery. This conference report highlights selected presentations on open-access approaches to R&D, novel and multifactorial targets, and technologies that assist drug discovery. Investigational drugs discussed include the anticancer agents astuprotimut-r (GlaxoSmithKline plc) and AS-1411 (Antisoma plc).
International Conference on Computers and Advanced Technology in Education
Advanced Information Technology in Education
2012-01-01
The volume includes a set of selected papers extended and revised from the 2011 International Conference on Computers and Advanced Technology in Education. With the development of computers and advanced technology, the human social activities are changing basically. Education, especially the education reforms in different countries, has been experiencing the great help from the computers and advanced technology. Generally speaking, education is a field which needs more information, while the computers, advanced technology and internet are a good information provider. Also, with the aid of the computer and advanced technology, persons can make the education an effective combination. Therefore, computers and advanced technology should be regarded as an important media in the modern education. Volume Advanced Information Technology in Education is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of computers and advanced technology in education to d...
International Conference on Advances in Information and Communication Technology
Nguyen, Thanh-Thuy; Vu, Duc-Thai; Phung, Trung-Nghia; Huynh, Van-Nam
2017-01-01
This book features papers presented at the International Conference on Advances in Information and Communication Technology (ICTA 2016), which was held in Thai Nguyen city, Vietnam, from December 1 to 13, 2016. The conference was jointly organized by Thai Nguyen University of Information and Communication Technology (ICTU), the Institute of Information Technology – Vietnam Academy of Science and Technology (IoIT), Feng Chia University, Taiwan (FCU), the Japan Advanced Institute of Science and Technology (JAIST) and the National Chung Cheng University, Taiwan (CCU) with the aim of bringing together researchers, academics, practitioners and students to not only share research results and practical applications but also to foster collaboration in information and communication technology research and education. The book includes the 66 best peer-reviewed papers, selected from the 150 submissions received.
STAIF96: space technology and applications international forum. Proceedings
International Nuclear Information System (INIS)
El-Genk, M.S.
1996-01-01
These proceedings represent papers presented at the Space Technology and Applications International Forum-STAIF. STAIF-96 hosted four technical conferences sharing the common interest in space exploration, technology, and commercialization. Topics discussed include space station, space transportation, materials processing in space, commercial forum, space power, commercial space ports, microelectronics, automation of robotics-space application, remote sensing, small business innovative research and communications. There were 243 papers presented at the forum, and 138 have been abstracted for the Energy Science and Technology database. STAIF-96 was partly sponsored by the U.S. Department of Energy
Impact of Information and Communication Technologies in International Negotiation Performance
Directory of Open Access Journals (Sweden)
Jose Alejandro Cano
2015-08-01
Full Text Available Objective – This article establishes relations between the level of importance of Information and Communication Technologies (ICT, the frequency of use of these tools, and the efficiency and efficacy achieved in the international negotiation processes. Design/methodology/approach – A research study is carried out in 180 import and / or export firms in Medellin city, and the proposed relations are explained through a theoretical model. With the information obtained, correlation and comparative analysis of efficiency and efficacy indicators are made. Findings – ICT are essential to perform international processes, therefore the increase in the importance level and frequency of use of these technologies allows perceiving better results about efficiency and efficacy increase. Practical implications – Increasing the application of ICT to the international negotiation processes generates a reduction of cost and time in negotiation and an increase of international sale contract, however ICT must be complemented by other elements such as attitude, training and experience of the negotiator to obtain satisfactory results. Originality/value – The article proposes an original model to study the effect of the importance level and frequency of use of ICT on the performance of international negotiation process.
International Conference on Mobile and Wireless Technology
Wattanapongsakorn, Naruemon; Joukov, Nikolai
2016-01-01
This book presents the peer-reviewed contributions of ICMWT2016, an international conference devoted to mobile and wireless technology. Researchers and professionals from academia and industry met to discuss the cutting-edge developments in the field. The book includes papers on mobile and wireless networks, the increasingly important security issues, data management, as well as the latest developments in mobile software development.
International cooperation in cold forging technology
DEFF Research Database (Denmark)
Bay, Niels; Lange, K
1992-01-01
International cooperation in the field of cold forging technology started in 1961 by formation of the OECD Group of Experts on Metal Forming. In 1967 this group was transformed into the International Cold Forging Group, ICFG, an independent body which has now been operative for 25 years. Members...... of the ICFG are personally elected by the Plenary as experts within the field, often representing national groups within cold forging. The main work within the ICFG is carried out in its subgroups which are established by the Plenary to collect, compile and evaluate data and eventually also produce data...... by cooperative activities or by instigating national research. These subgroups have produced 9 data sheets and 7 guidelines on subjects such as materials, tool design and construction, calculation methods for cold forging tools, manufacture of slugs, lubrication aspects and small quantity production. Plenary...
A technological contingency perspective on the depth and scope of international outsourcing
Mol, M.J.; Pauwels, Pieter; Matthyssens, P.; Quintens, L.
2004-01-01
In this study, we present and test a technological contingency perspective on two dimensions of international outsourcing: depth and scope. The depth of international outsourcing refers to the ratio of foreign to total outsourcing. The scope of international outsourcing captures the degree of
3rd International Conference on Intelligent Technologies and Engineering Systems
2016-01-01
This book includes the original, peer reviewed research from the 3rd International Conference on Intelligent Technologies and Engineering Systems (ICITES2014), held in December, 2014 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: Automation and robotics, fiber optics and laser technologies, network and communication systems, micro and nano technologies, and solar and power systems. This book also Explores emerging technologies and their application in a broad range of engineering disciplines Examines fiber optics and laser technologies Covers biomedical, electrical, industrial, and mechanical systems Discusses multimedia systems and applications, computer vision and image & video signal processing.
Christensen, James M.; Jones, Brian; Cooper, Jessica Rose; McAllister, Laura; Ware, Mark B.; West, Richard E.
2015-01-01
This study examines the trends of the "International Journal of Technology and Design Education" over the past decade (2005-2014). The researchers looked at trends in article topics, research methods, authorship, and article citations by analyzing keyword frequencies, performing word counts of article titles, classifying studies…
2011-02-02
... Machines Corporation, Global Technology Services Business Unit, Integrated Technology Services, Cost and..., applicable to workers of International Business Machines Corporation, Global Technology Services Business... engaged in activities related to support for the Global Technology Services Business Unit. The company...
Proceedings: 2nd IEA international workshop on beryllium technology for fusion
Energy Technology Data Exchange (ETDEWEB)
Longhurst, G.R.
1995-09-01
The 2nd IEA International Workshop on Beryllium Technology for Fusion was held September 6--8, 1995 at Jackson Lake Lodge, Wyoming. Forty-four participants took part in the workshop representing Europe, Japan, the Russian Federation, and the United States including representatives from both government laboratories and private industry. The workshop was divided into six technical sessions and a ``town meeting`` panel discussion. Technical sessions addressed the general topics of: Thermomechanical Properties; Manufacturing Technologies; Radiation Effects; Plasma/Tritium Interactions; Safety, Applications, and Design; and Joining and Testing. This volume contains the majority of the papers presented at the workshop. In some instances, the authors of the papers could not be present at the workshop, and the papers were given by others, sometimes in summary form and in some instances combined with others. The full papers are included here in the sequence in which they would have been given. In other instances, presentations were made but no papers were submitted for publication. Those papers do not appear here. In summary, the workshop was very successful. The main objectives of bringing key members of the fusion beryllium community together was certainly met. Forty-four participants registered, and 35 papers were presented. Individual papers are indexed separately on the energy data bases.
Proceedings: 2nd IEA international workshop on beryllium technology for fusion
International Nuclear Information System (INIS)
Longhurst, G.R.
1995-09-01
The 2nd IEA International Workshop on Beryllium Technology for Fusion was held September 6--8, 1995 at Jackson Lake Lodge, Wyoming. Forty-four participants took part in the workshop representing Europe, Japan, the Russian Federation, and the United States including representatives from both government laboratories and private industry. The workshop was divided into six technical sessions and a ''town meeting'' panel discussion. Technical sessions addressed the general topics of: Thermomechanical Properties; Manufacturing Technologies; Radiation Effects; Plasma/Tritium Interactions; Safety, Applications, and Design; and Joining and Testing. This volume contains the majority of the papers presented at the workshop. In some instances, the authors of the papers could not be present at the workshop, and the papers were given by others, sometimes in summary form and in some instances combined with others. The full papers are included here in the sequence in which they would have been given. In other instances, presentations were made but no papers were submitted for publication. Those papers do not appear here. In summary, the workshop was very successful. The main objectives of bringing key members of the fusion beryllium community together was certainly met. Forty-four participants registered, and 35 papers were presented. Individual papers are indexed separately on the energy data bases
International Nuclear Information System (INIS)
2004-01-01
Nuclear power is a significant contributor to the global supply of electricity, and continues to be the major source that can provide electricity on a large scale with a comparatively minimal impact on the environment. But it is evident that, despite decades of experience with this technology, nuclear power today remains mainly in a holding position, with its future somewhat uncertain primarily due to concerns related to waste, safety and security. One of the most important factors that would influence future nuclear growth is the innovation in reactor and fuel cycle technologies to successfully maximize the benefits of nuclear power while minimizing the associated concerns. The main objectives of the Conference were to facilitate exchange of information between senior experts and policy makers from Member States and international organizations on important aspects of the development of innovative technologies for future generations of nuclear power reactors and fuel cycles; to create an understanding of the social, environmental and economic conditions that would facilitate innovative and sustainable nuclear technologies; and to identify opportunities for collaborative work between Member States and international organizations and programmes. All relevant aspects of innovative technologies for nuclear fuel cycles and nuclear power were discussed in an open, frank and objective manner. These proceedings contain a summary of the results of the conference, invited and contributed papers, and summaries of panel discussions. No large increase in the use of nuclear energy is foreseen in the near and medium term, but is likely in the long term if developing country per-capita electricity consumption reaches that of the developed world. The nuclear sector including regulators view an increased use of nuclear energy as the solution for global sustainable energy needs considering that significant reductions in CO 2 emissions would be required. Although the current nuclear
Proceedings: international conference on transfer of forest science knowledge and technology.
Cynthia Miner; Ruth Jacobs; Dennis Dykstra; Becky Bittner
2007-01-01
This proceedings compiles papers presented by extensionists, natural resource specialists, scientists, technology transfer specialists, and others at an international conference that examined knowledge and technology transfer theories, methods, and case studies. Theory topics included adult education, applied science, extension, diffusion of innovations, social...
PREFACE: 7th International Conference on Cooling & Heating Technologies (ICCHT 2014)
2015-09-01
The Kyoto protocol has initiated a pledge from almost all developing and developed countries to be committed to reducing CO2 emissions. Development of new renewable energy technologies are also of interest in this conference. Greenhouse gases have contributed to global warming and other man-made disasters. Cooling and Heating communities also have responsibilities towards the commitment of reducing the greenhouse gas emissions. In addition, depleting natural resources also act as a threat to the Cooling and Heating industries, causing them to develop highly efficient equipment and innovative technologies. The 1st International Conference on Cooling & Heating Technologies was held in Hanoi Vietnam (Jan. 2005). Whereas the 2nd, 3rd, 4th and 5th ICCHT conferences were held in Dalian, China (Jul. 2006), Tokyo, Japan (Jul. 2007), Jinhae, Korea (Oct. 2008) and Bandung, Indonesia (Dec. 2010) respectively. The 6th International Conference on Cooling & Heating Technologies (ICCTH2012) was held in Xi'an in China on November 9-12, 2012. It is our pleasure to welcome you to the 7th International Conference on Cooling & Heating Technologies (ICCTH2014) on 4th - 6th November 2014 at the Grand Dorsett Subang Hotel, Subang Jaya, Selangor Darul Ehsan, Malaysia The Theme of the Conference is ''Sustainability and Innovation in Heating & Cooling Technologies''. The sub-themes are:- • CO2 Reduction and Low Carbon Technologies • HVAC System and Natural Ventilation • Energy & Alternative Energy • Computational Fluid Dynamics • Low Temperature & Refrigeration Engineering In conjunction with the Conference, an Exhibition will be organized as an integral part of the Conference. Project experiences, product solutions, new applications and state-of-the art information will be highlighted.
11th International Conference on Computing and Information Technology
Meesad, Phayung; Boonkrong, Sirapat
2015-01-01
This book presents recent research work and results in the area of communication and information technologies. The book includes the main results of the 11th International Conference on Computing and Information Technology (IC2IT) held during July 2nd-3rd, 2015 in Bangkok, Thailand. The book is divided into the two main parts Data Mining and Machine Learning as well as Data Network and Communications. New algorithms and methods of data mining asr discussed as well as innovative applications and state-of-the-art technologies on data mining, machine learning and data networking.
Woo, David James
2015-01-01
An international school may make organisational choices that divide the school by curriculum, grade-level, language and location. This article explores how a school's organisational stratification impacts how the school supports changing teaching and learning practices through technology. The article draws from case data of technology integration…
Energy Technology Data Exchange (ETDEWEB)
Bhasin, Shikha
2014-07-01
As a global agreement on climate mitigation and absolute emissions reductions remains grid-locked, this paper assesses whether the prospects for international technology cooperation in low-carbon sectors can be improved. It analyses the case of international cooperation on electric vehicle technologies to elaborate on the trade-offs that cooperation such as this inherently attempts to balance- national growth objectives of industrial and technology development versus the global goods benefit of reducing greenhouse gas (GHG) emissions. It focuses on bilateral German-Chinese programmes for electric vehicle development, as well as multilateral platforms on low-carbon technology cooperation related to electric vehicles. Based on insights from these cases studies, this paper ultimately provides policy recommendations to address gaps in international technology cooperation at a bilateral level for ongoing German-Chinese engagement on electric vehicles; and at a multilateral level with a focus on the emerging technology cooperation framework of the United Nations Framework Convention on Climate Change (UNFCCC).
International Nuclear Information System (INIS)
Bhasin, Shikha
2014-01-01
As a global agreement on climate mitigation and absolute emissions reductions remains grid-locked, this paper assesses whether the prospects for international technology cooperation in low-carbon sectors can be improved. It analyses the case of international cooperation on electric vehicle technologies to elaborate on the trade-offs that cooperation such as this inherently attempts to balance- national growth objectives of industrial and technology development versus the global goods benefit of reducing greenhouse gas (GHG) emissions. It focuses on bilateral German-Chinese programmes for electric vehicle development, as well as multilateral platforms on low-carbon technology cooperation related to electric vehicles. Based on insights from these cases studies, this paper ultimately provides policy recommendations to address gaps in international technology cooperation at a bilateral level for ongoing German-Chinese engagement on electric vehicles; and at a multilateral level with a focus on the emerging technology cooperation framework of the United Nations Framework Convention on Climate Change (UNFCCC).
Energy Technology Data Exchange (ETDEWEB)
Chang, Moon Hee; Kim, H. R.; Kim, H. J.; Chang, J. H.; Hahn, D. H.; Bae, Y. Y.; Kim, W. W.; Jeong, I.; Lee, D. S.; Lee, J. H. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)
2008-06-15
Generation IV International Forum(GIF), where 13 countries including Korea collaborate to develop future nuclear energy systems, put into force 'Generation IV International Forum Project Arrangement' in 2007 for the international research and development of Gen IV Systems, following the entry into force of Framework Agreement in 2005. The International Nuclear Research Initiative(I-NERI) between Korea and United States and the International Project on Innovative Nuclear Energy Systems and Fuel Cycles(INPRO) of IAEA are continued in this year, produced lots of visible outcomes. These international activities have a common goal of the collaborative development of advanced nuclear system technologies but differ in the main focusing areas and aspects, so Korea needs to establish the integrated strategy based on the distinguished and complementary approach for the participation of each international programs, as examples the GIF for the advanced system technology development, INPRO for the set-up of institution and infra-structure, and I-NERI for the access of the core technologies and acquisition of the transparency of nuclear R and D.
International Nuclear Information System (INIS)
Chang, Moon Hee; Kim, H. R.; Kim, H. J.; Chang, J. H.; Hahn, D. H.; Bae, Y. Y.; Kim, W. W.; Jeong, I.; Lee, D. S.; Lee, J. H.
2008-06-01
Generation IV International Forum(GIF), where 13 countries including Korea collaborate to develop future nuclear energy systems, put into force 'Generation IV International Forum Project Arrangement' in 2007 for the international research and development of Gen IV Systems, following the entry into force of Framework Agreement in 2005. The International Nuclear Research Initiative(I-NERI) between Korea and United States and the International Project on Innovative Nuclear Energy Systems and Fuel Cycles(INPRO) of IAEA are continued in this year, produced lots of visible outcomes. These international activities have a common goal of the collaborative development of advanced nuclear system technologies but differ in the main focusing areas and aspects, so Korea needs to establish the integrated strategy based on the distinguished and complementary approach for the participation of each international programs, as examples the GIF for the advanced system technology development, INPRO for the set-up of institution and infra-structure, and I-NERI for the access of the core technologies and acquisition of the transparency of nuclear R and D
INFORMATION AND COMMUNICATION TECHNOLOGIES TRAINING: CRITERIA FOR INTERNAL QUALITY ASSESSMENT
Directory of Open Access Journals (Sweden)
Oleg M. Spirin
2011-02-01
Full Text Available In the article the concept of information and communication technology training is specified. It is grounded an internal criteria of information and communication technologies training quality assessment based on experience of the organization, carrying out, analysis of experimental work results on quality assessment of designing, working out, efficiency of methodical system of informatics teachers base vocational training introduction in the conditions of credit-modular technology. Indicators and approaches of their assessment to define the criteria degree are resulted. Indicators of criteria "level differentiation", "individualization" and "intensification" of educational process for information and communication technologies training quality assessment are specified.
Containment and stabilization technologies for mixed hazardous and radioactive wastes
International Nuclear Information System (INIS)
Buelt, J.L.
1993-05-01
A prevalent approach to the cleanup of waste sites contaminated with hazardous chemicals and radionuclides is to contain and/or stabilize wastes within the site. Stabilization involves treating the wastes in some fashion, either in situ or above ground after retrieval, to reduce the leachability and release rate of waste constituents to the environment. This approach is generally reserved for radionuclide contaminants, inorganic hazardous contaminants such as heavy metals, and nonvolatile organic contaminants. This paper describes the recent developments in the technical options available for containing and stabilizing wastes. A brief description of each technology is given along with a discussion of the most recent developments and examples of useful applications
Laurini, Kathleen C.; Hufenbach, Bernhard; Satoh, Maoki; Piedboeuf, Jean-Claude; Neumann, Benjamin
2010-01-01
Advancing critical and enhancing technologies is considered essential to enabling sustainable and affordable human space exploration. Critical technologies are those that enable a certain class of mission, such as technologies necessary for safe landing on the Martian surface, advanced propulsion, and closed loop life support. Others enhance the mission by leading to a greater satisfaction of mission objectives or increased probability of mission success. Advanced technologies are needed to reduce mass and cost. Many space agencies have studied exploration mission architectures and scenarios with the resulting lists of critical and enhancing technologies being very similar. With this in mind, and with the recognition that human space exploration will only be enabled by agencies working together to address these challenges, interested agencies participating in the International Space Exploration Coordination Group (ISECG) have agreed to perform a technology assessment as an important step in exploring cooperation opportunities for future exploration mission scenarios. "The Global Exploration Strategy: The Framework for Coordination" was developed by fourteen space agencies and released in May 2007. Since the fall of 2008, several International Space Exploration Coordination Group (ISECG) participating space agencies have been studying concepts for human exploration of the moon. They have identified technologies considered critical and enhancing of sustainable space exploration. Technologies such as in-situ resource utilization, advanced power generation/energy storage systems, reliable dust resistant mobility systems, and closed loop life support systems are important examples. Similarly, agencies such as NASA, ESA, and Russia have studied Mars exploration missions and identified critical technologies. They recognize that human and robotic precursor missions to destinations such as LEO, moon, and near earth objects provide opportunities to demonstrate the
Cleaner Technologies and the Stability of International Environmental Agreements
Benchekroun, H.; Ray Chaudhuri, A.
2012-01-01
Abstract: This paper shows that, if countries are farsighted when deciding whether to defect from a coalition, then the implementation of cleaner technologies may jeopardize the chances of reaching an international environmental agreement. The grand coalition may be destabilized by the
Deep Learning: Enriching Teacher Training through Mobile Technology and International Collaboration
Naylor, Amanda; Gibbs, Janet
2018-01-01
This article presents results from an international collaboration between college students and pre-service teachers in Norway and the UK. This research is part of a large, international project exploring and developing the interrelationship between mobile technology and teachers' perceptions of teaching and learning. Data was collected for this…
International Nuclear Science and Technology Conference 2016
International Nuclear Information System (INIS)
2017-01-01
Conference Nuclear technology has played an important role in many aspects of our lives, including agriculture, medicine and healthcare, materials, environment, forensics, energy, and frontier advancement. The International Nuclear Science and Technology Conference (INST) aims to bring together scientists, engineers, academics and students to share knowledge and experiences about all aspects of nuclear sciences. INST2016 was the second of the INST conference series organized by Thailand Institute of Nuclear Technology. INST has evolved from a national conference series on nuclear science and technology that was held every two years in Bangkok for over a twenty-year period. INST2016 was held from 4 - 6 August 2016 in Bangkok, Thailand, under the central theme “Nuclear for Better Life”. The conference working language was English. The oral and poster research presentations covered seven major topics: • Nuclear physics and engineering (PHY) • Nuclear and radiation safety (SAF) • Medical and nutritional applications (MED) • Environmental applications (ENV) • Radiation processing and industrial applications (IND) • Agriculture and food applications (AGR) • Instrumentation and other related topics (INS) The welcome addresses, committees, program of the conference and the list of presentations can be found in the PDF. (paper)
CODE ACCEPTANCE OF A NEW JOINING TECHNOLOGY FOR STORAGE CONTAINMENTS (REISSUE)
International Nuclear Information System (INIS)
Cannel, G.R.; Grant, G.J.; Hill, B.E.
2009-01-01
One of the activities associated with cleanup throughout the Department of Energy (DOE) complex is packaging radioactive materials into storage containers. Much of this work will be performed in high-radiation environments requiring fully remote operations, for which existing, proven systems do not currently exist. These conditions require a process that is capable of producing acceptable (defect-free) welds on a consistent basis; the need to perform weld repair, under fully-remote operations, can be extremely costly and time consuming. Current closure-welding technologies (fusion welding) are not well suited for this application and will present risk to cleanup cost and schedule. To address this risk, Fluor and the Pacific Northwest National Laboratory (PNNL) are proposing that a new and emerging joining technology, Friction Stir Welding (FSW), be considered for this work. FSW technology has been demonstrated in other industries (aerospace and marine) to produce near flaw-free welds on a consistent basis. FSW is judged capable of providing the needed performance for fully-remote closure welding of containers for radioactive materials for the following reasons: FSW is a solid-state process; material is not melted. FSW does not produce the type of defects associated with fusion welding, e.g., solidification-induced porosity, cracking, and distortion due to weld shrinkage. In addition, because FSW is a low-heat input process, material properties (mechanical, corrosion and environmental) experience less degradation in the heat affected zones than do fusion welds. When compared to fusion processes, FSW produces extremely high weld quality. FSW is performed using machine-tool technology. The equipment is simple and robust and well-suited for high radiation, fully-remote operations compared to the relatively complex equipment associated with fusion-welding processes. Additionally, for standard wall thicknesses of radioactive materials containers, the FSW process can
CONFERENCE REVIEW:V. International Educational Technology Symposium
Directory of Open Access Journals (Sweden)
Reviewed by Mubin KIYICI
2005-10-01
Full Text Available 167V. International Educational Technology SymposiumWas held in Sakarya UniversityBetween 21 – 23 September 2005Reviewed by Mubin KIYICISakarya Universitymkiyici@anadolu.edu.trV. International Educational Technology Symposium was held in Sakarya University heldbetween 21 – 23 September 2005 by cooperation with Eastern Mediterranean University,Louisiana State University, Governors State University and Ohio University, and TOJET(The Turkish Online Journal of Educational Technology journal, at Sakarya UniversityCampus. Assoc. Prof. Dr. Aytekin ISMAN who was conference coordinator and Editor inchief of TOJET spoke at the opening ceremony of symposium. His speech was related todiffusion of distance education and diffusion of usage educational technology. And thenProf. Dr. Mehmet DURMAN who is Rector of Sakarya University, talked about aapplications of Distance Education which is applied by Sakarya University and educationaltechnology applications in Tukey. His Speech is here:168Dear GuestsWelcome to the “5th International Educational Technology ConferenceIETC/EGİTEK 2005. It is an international educational activity for academics,teachers and educators. This conference is now a well known educationaltechnology event and the number of paper submissions and attendeesincrease every year.This year, IETC-2005 received 268 applications. The conference academicadvisory board accepted 209 applications.IETC-2005 promotes the development and dissemination of theoreticalknowledge, conceptual research, and professional knowledge throughconference activities, the conference proceeding book, and the TurkishOnline Journal of Educational Technology (TOJET. Its focus is to create anddisseminate knowledge about the use instructional technology for learningand teaching in education.The main theme of IETC-2005 is distance education. Distance education is adelivery system of teaching and learning, when the teacher and the studentare separated by physical distance
Manske, E.; Froehlich, T.
2012-07-01
The 56th International Scientific Colloquium was held from 12th to 16th September 2011 at the Ilmenau University of Technology in Germany. This event was organized by the Faculty of Mechanical Engineering under the title: 'Innovation in Mechanical Engineering—Shaping the Future' and was intended to reflect the entire scope of modern mechanical engineering. In three main topics many research areas, all involving innovative mechanical engineering, were addressed, especially in the fields of Precision Engineering and Precision Measurement Technology, Mechatronics and Ambient-Assisted Living and Systems Technology. The participants were scientists from 21 countries, and 166 presentations were given. This special issue of Measurement Science and Technology presents selected contributions on 'Precision Engineering and Precision Measurement Technology'. Over three days the conference participants discussed novel scientific results in two sessions. The main topics of these sessions were: Measurement and Sensor Technology Process measurement Laser measurement Force measurement Weighing technology Temperature measurement Measurement dynamics and Nanopositioning and Nanomeasuring Technology Nanopositioning and nanomeasuring machines Nanometrology Probes and tools Mechanical design Signal processing Control and visualization in NPM devices Significant research results from the Collaborative Research Centre SFB 622 'Nanopositioning and Nanomeasuring Machines' funded by the German Research Foundation (DFG) were presented as part of this topic. As the Chairmen, our special thanks are due to the International Programme Committee, the Organization Committee and the conference speakers as well as colleagues from the Institute of Process Measurement and Sensor Technology who helped make the conference a success. We would like to thank all the authors for their contributions, the referees for their time spent reviewing the contributions and their valuable comments, and the whole
Directory of Open Access Journals (Sweden)
Gretchen Meiser
2011-05-01
Full Text Available This case study is the result of a project conducted on behalf of a company that uses its own returnable containers to transport purchased parts from suppliers. The objective of this project was to develop a proposal to enable the company to more effectively track and manage its returnable containers. The research activities in support of this project included (1 the analysis and documentation of the physical flow and the information flow associated with the containers and (2 the investigation of new technologies to improve the automatic identification and tracking of containers. This paper explains the automatic identification technologies and important criteria for selection. A companion paper details the flow of information and containers within the logistics chain, and it identifies areas for improving the management of the containers.
International Conference on Systems, Control and Information Technologies 2016
Kaliczyńska, Małgorzata
2017-01-01
This book presents the proceedings of the International Conference on Systems, Control and Information Technologies 2016. It includes research findings from leading experts in the fields connected with INDUSTRY 4.0 and its implementation, especially: intelligent systems, advanced control, information technologies, industrial automation, robotics, intelligent sensors, metrology and new materials. Each chapter offers an analysis of a specific technical problem followed by a numerical analysis and simulation as well as the implementation for the solution of a real-world problem.
Satellite Technologies and Services: Implications for International Distance Education.
Stahmer, Anna
1987-01-01
This examination of international distance education and open university applications of communication satellites at the postsecondary level notes activities in less developed countries (LDCs); presents potential models for cooperation; and describes technical systems for distance education, emphasizing satellite technology and possible problems…
International Nuclear Information System (INIS)
2006-01-01
Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of nuclear power systems. The ICHMI system, together with plant personnel, is the 'central nervous system' for operating plants. It senses basic parameters, monitors performance, integrates information, and makes adjustments to plant operations as necessary. It also responds to failures and off-normal events, thus ensuring goals of efficient power production and safety. The ICHMI system embodies the sensing, communications, monitoring, control, and presentation and command systems between the process (i.e., the reactor, heat transport, and energy conversion systems) and the plant personnel. It enables plant personnel to more effectively monitor the health of the plant and to identify opportunities to improve the performance of equipment and systems as well as to anticipate, understand, and respond to potential problems. Improved controls provide the basis to operate more closely to performance margins, and the improved integration of automatic and human response enables them to work cooperatively to accomplish production and safety goals. The ICHMI system thus directly impacts the performance of the entire plant and thereby the economics, safety, and security of current and future reactor designs. The 5. International Topical Meeting on Nuclear Plant Instrumentation Control and Human-Machine Interface Technology (NPIC and HMIT 2006) is specifically devoted to advances in these important technologies. In these proceedings, more than 200 papers and panel sessions from all over the world have been assembled to share the most recent information and innovations in ICHMI technology and to discuss the important issues that face the future of the industry. The papers fall into two major groupings: instrumentation and control (I and C) and human-machine interface technology (HMIT). The I and C papers are organized into five tracks. 'Systems
Energy Technology Data Exchange (ETDEWEB)
NONE
2006-07-01
Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of nuclear power systems. The ICHMI system, together with plant personnel, is the 'central nervous system' for operating plants. It senses basic parameters, monitors performance, integrates information, and makes adjustments to plant operations as necessary. It also responds to failures and off-normal events, thus ensuring goals of efficient power production and safety. The ICHMI system embodies the sensing, communications, monitoring, control, and presentation and command systems between the process (i.e., the reactor, heat transport, and energy conversion systems) and the plant personnel. It enables plant personnel to more effectively monitor the health of the plant and to identify opportunities to improve the performance of equipment and systems as well as to anticipate, understand, and respond to potential problems. Improved controls provide the basis to operate more closely to performance margins, and the improved integration of automatic and human response enables them to work cooperatively to accomplish production and safety goals. The ICHMI system thus directly impacts the performance of the entire plant and thereby the economics, safety, and security of current and future reactor designs. The 5. International Topical Meeting on Nuclear Plant Instrumentation Control and Human-Machine Interface Technology (NPIC and HMIT 2006) is specifically devoted to advances in these important technologies. In these proceedings, more than 200 papers and panel sessions from all over the world have been assembled to share the most recent information and innovations in ICHMI technology and to discuss the important issues that face the future of the industry. The papers fall into two major groupings: instrumentation and control (I and C) and human-machine interface technology (HMIT). The I and C papers are organized into five tracks
Contributions to the third international symposium on fusion nuclear technologies (ISFNT-3)
International Nuclear Information System (INIS)
1994-11-01
The contributions of ENEA (Italian Agency for New Technologies, Energy and the Environment) Frascati center researchers to the 3rd international symposium on fusion nuclear technologies, held at Los Angeles, 27 June-1 July 1994, are presented
10th International Conference on Computing and Information Technology
Unger, Herwig; Meesad, Phayung
2014-01-01
Computer and Information Technology (CIT) are now involved in governmental, industrial, and business domains more than ever. Thus, it is important for CIT personnel to continue academic research to improve technology and its adoption to modern applications. The up-to-date research and technologies must be distributed to researchers and CIT community continuously to aid future development. The 10th International Conference on Computing and Information Technology (IC 2 IT2014) organized by King Mongkut's University of Technology North Bangkok (KMUTNB) and partners provides an exchange of the state of the art and future developments in the two key areas of this process: Computer Networking and Data Mining. Behind the background of the foundation of ASEAN, it becomes clear that efficient languages, business principles and communication methods need to be adapted, unified and especially optimized to gain a maximum benefit to the users and customers of future IT systems.
2015 International Conference on Information Technology and Intelligent Transportation Systems
Jain, Lakhmi; Zhao, Xiangmo
2017-01-01
This volume includes the proceedings of the 2015 International Conference on Information Technology and Intelligent Transportation Systems (ITITS 2015) which was held in Xi’an on December 12-13, 2015. The conference provided a platform for all professionals and researchers from industry and academia to present and discuss recent advances in the field of Information Technology and Intelligent Transportation Systems. The presented information technologies are connected to intelligent transportation systems including wireless communication, computational technologies, floating car data/floating cellular data, sensing technologies, and video vehicle detection. The articles focusing on intelligent transport systems vary in the technologies applied, from basic management systems to more application systems including topics such as emergency vehicle notification systems, automatic road enforcement, collision avoidance systems and some cooperative systems. The conference hosted 12 invited speakers and over 200 part...
International legal framework for geoengineering: Managing the risks of an emerging technology
Du, Haomiao
2016-01-01
The present book “International Legal Framework for Geoengineering – Managing the Risks of an Emerging Technology” is about international law and an emerging technology called geoengineering, which refers to the large-scale manipulation of the planetary environment for counteracting anthropogenic
Authenticated Secure Container System (ASCS)
International Nuclear Information System (INIS)
1991-01-01
Sandia National Laboratories developed an Authenticated Secure Container System (ASCS) for the International Atomic Energy Agency (IAEA). Agency standard weights and safeguards samples can be stored in the ASCS to provide continuity of knowledge. The ASCS consists of an optically clear cover, a base containing the Authenticated Item Monitoring System (AIMS) transmitter, and the AIMS receiver unit for data collection. The ASCS will provide the Inspector with information concerning the status of the system, during a surveillance period, such as state of health, tampering attempts, and movement of the container system. The secure container is located inside a Glove Box with the receiver located remotely from the Glove Box. AIMS technology uses rf transmission from the secure container to the receiver to provide a record of state of health and tampering. The data is stored in the receiver for analysis by the Inspector during a future inspection visit. 2 refs
Energy Technology Data Exchange (ETDEWEB)
Pottinger, C. (ed.)
2007-05-15
Ensuring energy security and addressing climate change issues in a cost-effective way are the main challenges of energy policies and in the longer term will be solved only through technology cooperation. To encourage collaborative efforts to meet these energy challenges, the IEA created a legal contract - Implementing Agreement - and a system of standard rules and regulations. This allows interested member and non-member governments or other organisations to pool resources and to foster the research, development and deployment of particular technologies. For more than 30 years, this international technology collaboration has been a fundamental building block in facilitating progress of new or improved energy technologies. There are now 41 Implementing Agreements. This is the third in the series of publications highlighting the recent results and achievements of the IEA Implementing Agreements. This document is arranged in the following sections: Cross-cutting activities (sub-sectioned: Climate technology initiative; Energy Technology Data Eexchange; and Energy technology systems analysis programme); End-use technologies (sub-sectioned: Buildings; Electricity; Industry; and Transport; Fossil fuels (sub-sectioned: Clean Coal Centre; Enhanced oil recovery Fluidized bed conversion; Greenhouse Gas R & D; Multiphase flow sciences); Fusion power; Renewable energies and hydrogen; and For more information (including detail on the IEA energy technology network; IEA Secretariat Implementing Agreement support; and IEA framework. Addresses are given for the Implementing Agreements. The publication is based on core input from the Implementing Agreement Executive Committee.
International Conference on Computer Science and Information Technology
Li, Xiaolong
2014-01-01
The main objective of CSAIT 2013 is to provide a forum for researchers, educators, engineers and government officials involved in the general areas of Computational Sciences and Information Technology to disseminate their latest research results and exchange views on the future research directions of these fields. A medium like this provides an opportunity to the academicians and industrial professionals to exchange and integrate practice of computer science, application of the academic ideas, improve the academic depth. The in-depth discussions on the subject provide an international communication platform for educational technology and scientific research for the world's universities, engineering field experts, professionals and business executives.
International Workshop on Evidence-Based Technology Enhanced Learning
Gennari, Rosella; Marenzi, Ivana; Prieta, Fernando; Rodríguez, Juan
2012-01-01
Research on Technology Enhanced Learning (TEL) investigates how information and communication technologies can be designed in order to support pedagogical activities. The workshop proceedings collects contributions concerning evidence based TEL systems, like their design following EBD principles as well as studies or best practices that educators, education stakeholders or psychologists used to diagnose or improve their students' learning skills, including students with specific difficulties. The international ebTEL’12 workshop wants to be a forum in which TEL researchers and practitioners alike can discuss ideas, projects, and lessons related to ebTEL. The workshop takes place in Salamanca, Spain, on March 28th-30th 2012.
International Nuclear Information System (INIS)
Jordan, G.B.; Reed, J.H.; Wyler, L.D.
1997-03-01
This report describes the process and results from an effort to develop metrics for program accomplishments for the FY 1997 budget submission of the U.S. Department of Energy Environmental Management International Technology Integration Program (EM-ITI). The four-step process included interviews with key EM-ITI staff, the development of a strawman program logic chart, and all day facilitated workshop with EM-ITI staff during which preliminary performance plans and measures were developed and refined, and a series of follow-on discussions and activities including a cross-organizational project data base. The effort helped EM-ITI to crystallize and develop a unified vision of their future which they can effectively communicate to their own management and their internal and external customers. The effort sets the stage for responding to the Government Performance and Results Act. The metrics developed may be applicable to other international technology integration programs. Metrics were chosen in areas of eight general performance goals for 1997-1998: (1) number of forums provided for the exchange of information, (2) formal agreements signed, (3) new partners identified, (4) customers reached and satisfied, (5, 6) dollars leveraged by EM technology focus area and from foreign research, (7) number of foreign technologies identified for potential use in remediation of DOE sites, and (8) projects advanced through the pipeline
A technological contingency perspective on the dept and scope of international outsourcing
Mol, M.J.; PAUWELS, Pieter; MATTHYSSENS, Paul
2006-01-01
In this study we present and test a technological contingency perspective on two dimensions of international outsourcing: depth and scope. The depth of international outsourcing refers to the ratio of foreign to total outsourcing. The scope of international outsourcing refers to the ratio of foreign to total outsourcing. The scope of international outsourcing captures the degree of psychic dispersion between the country of operations and the countries a firm is outsourcing to. Using multiple...
2nd International Conference on Intelligent Technologies and Engineering Systems
Chen, Cheng-Yi; Yang, Cheng-Fu
2014-01-01
This book includes the original, peer reviewed research papers from the 2nd International Conference on Intelligent Technologies and Engineering Systems (ICITES2013), which took place on December 12-14, 2013 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: laser technology, wireless and mobile networking, lean and agile manufacturing, speech processing, microwave dielectrics, intelligent circuits and systems, 3D graphics, communications, and structure dynamics and control.
International Nuclear Information System (INIS)
1990-03-01
The 9th Plenary Meeting of the International Working Group on Water Reactor Fuel Performance and Technology (IWGFPT) was held in Vienna from 2 to 4 October 1989. The meeting was attended by 24 participants from 18 Member States and one international organization. This publication is a summary report of this meeting. It contains review of the IWGFPT activities of the period since the 8th meeting. The representatives of the Member States presented information about National Programs and multilateral projects status with emphasis on new results. Summary of the discussion on schedule of IWGFPT activities for the period of 1990-91 is also published in this report. Refs, figs and tabs
International Implications of Labeling Foods Containing Engineered Nanomaterials.
Grieger, Khara D; Hansen, Steffen Foss; Mortensen, Ninell P; Cates, Sheryl; Kowalcyk, Barbara
2016-05-01
To provide greater transparency and comprehensive information to consumers regarding their purchase choices, the European Parliament and the Council have mandated via Regulation 1169/2011 that foods containing engineered nanomaterials (ENMs) be labeled. This review covers the main concerns related to the use of ENMs in foods and the potential impacts that this type of food labeling might have on diverse stakeholder groups, including those outside the European Union (EU), e.g., in the United States. We also provide recommendations to stakeholders for overcoming existing challenges related to labeling foods containing ENMs. The revised EU food labeling requirements will likely result in a number of positive developments and a number of challenges for stakeholders in both EU and non-EU countries. Although labeling of foods containing ENMs will likely improve transparency, provide more information to facilitate consumer decisions, and build trust among food safety authorities and consumers, critical obstacles to the successful implementation of these labeling requirements remain, including the need for (i) harmonized information requirements or regulations between countries in different regions of the world, (ii) clarification of the regulatory definitions of the ENMs to be used for food labeling, (iii) robust techniques to detect, measure, and characterize diverse ENMs in food matrices, and (iv) clarification of the list of ENMs that may be exempt from labeling requirements, such as several food additives used for decades. We recommend that food industries and food safety authorities be more proactive in communicating with the public and consumer groups regarding the potential benefits and risks of using ENMs in foods. Efforts should be made to improve harmonization of information requirements between countries to avoid potential international trade barriers.
The international handbook of space technology
Badescu, Viorel
2014-01-01
This comprehensive handbook provides an overview of space technology and a holistic understanding of the system-of-systems that is a modern spacecraft. With a foreword by Elon Musk, CEO and CTO of SpaceX, and contributions from globally leading agency experts from NASA, ESA, JAXA, and CNES, as well as European and North American academics and industrialists, this handbook, as well as giving an interdisciplinary overview, offers, through individual self-contained chapters, more detailed understanding of specific fields, ranging through: · Launch systems, structures, power, thermal, communications, propulsion, and software, to · entry, descent and landing, ground segment, robotics, and data systems, to · technology management, legal and regulatory issues, and project management. This handbook is an equally invaluable asset to those on a career path towards the space industry as it is to those already within the industry.
Innovation and international technology transfer: The case of the Chinese photovoltaic industry
International Nuclear Information System (INIS)
Tour, Arnaud de la; Glachant, Matthieu; Meniere, Yann
2011-01-01
China is the largest solar photovoltaic cell producer in the world, with more than one third of worldwide production in 2008, exporting more than 95 percent of what it produces. The purpose of this paper is to understand the drivers of this success and its limits, with a particular emphasis on the role of technology transfers and innovation. Our analysis combines a review of international patent data at a detailed technology level with field interviews of ten Chinese PV companies. We show that Chinese producers have acquired the technologies and skills necessary to produce PV products through two main channels: the purchasing of manufacturing equipment in a competitive international market and the recruitment of skilled executives from the Chinese diaspora who built pioneer PV firms. The success of these firms in their market is, however, not reflected in their performance in terms of innovation. Rather, patent data highlight a policy-driven effort to catch up in critical technological areas. - Research Highlights: →China has become the world leader in the production of PV cells and modules, but remains far behind industrialized countries in the more upstream segments of the photovoltaic industry. →International technology transfers from industrialized countries to China have taken place through two main channels: the competitive market of manufacturing equipments, and labour mobility. →Fierce competition between equipment manufacturers and public availability of core technology have prevented intellectual property rights from hindering technology transfers towards China. →As compared with their foreign competitors, Chinese firms file many patents, but of low technical and commercial value. →Chinese firms' innovation is focused on process rather than on products.
Technological Innovations and International Humanitarian Law: Challenges and Tensions
Directory of Open Access Journals (Sweden)
Eric Pomès
2017-12-01
Full Text Available In recent years, armed conflicts have changed in nature (civil war, ‘terrorism’ and the means used are increasingly technological (robotisation, cyberwar. Faced with these developments, some would claim International Humanitarian Law (IHL is outdated. While these technological innovations present new challenges in the application of IHL, it still constitutes a relevant legal framework for armed conflicts and the conduct of hostilities. Indeed, the flexibility of IHL allows it to adapt to contemporary conflicts. Therefore, this shows that the statements about its obsolescence are primarily political in nature.
International Nuclear Information System (INIS)
Sharipova, N.S.
1999-01-01
The published proceedings contain brief presentations concerning new technologies in power engineering, transport, oil industry, machinery construction, building construction and information technologies presented to the International scientific and technical conference: New technologies in Islamic countries, which was organized within frame work of 6 General Assembly of Federation of engineering Institutes of Islamic countries (FEIIC). (author)
International Nuclear Information System (INIS)
Hillebrand, C.D.
1999-01-01
Scientific publications disseminate research results and are therefore an interesting subject for science and technology analysis. Bibliographic databases contain scientific publications which are indexed and structured. The paper considers Fusion Research and Technology records which are stored in the International Nuclear Information System (INIS) bibliographic database. For the first time, all scientometric and bibliometric information specific to a selected field of science and technology contained in a bibliographic database, using INIS records, is analysed and quantified. A variety of new science and technology indicators which can be used for assessing research and development activities are also presented. (author)
International Nuclear Information System (INIS)
Hillebrand, C.-D.
2001-01-01
Scientific publications disseminate research results and are therefore an interesting subject for science and technology analysis. Bibliographic databases contain scientific publications which are indexed and structured. The paper considers Fusion Research and Technology records which are stored in the International Nuclear Information System (INIS) bibliographic database. For the first time, all scientometric and bibliometric information specific to a selected field of science and technology contained in a bibliographic database, using INIS records, is analysed and quantified. A variety of new science and technology indicators which can be used for assessing research and development activities are also presented. (author)
Materials on the International Space Station - Forward Technology Solar Cell Experiment
Walters, R. J.; Garner, J. C.; Lam, S. N.; Vazquez, J. A.; Braun, W. R.; Ruth, R. E.; Lorentzen, J. R.; Bruninga, R.; Jenkins, P. P.; Flatico, J. M.
2005-01-01
This paper describes a space solar cell experiment currently being built by the Naval Research Laboratory (NRL) in collaboration with NASA Glenn Research Center (GRC), and the US Naval Academy (USNA). The experiment has been named the Forward Technology Solar Cell Experiment (FTSCE), and the purpose is to rapidly put current and future generation space solar cells on orbit and provide validation data for these technologies. The FTSCE is being fielded in response to recent on-orbit and ground test anomalies associated with space solar arrays that have raised concern over the survivability of new solar technologies in the space environment and the validity of present ground test protocols. The FTSCE is being built as part of the Fifth Materials on the International Space Station (MISSE) Experiment (MISSE-5), which is a NASA program to characterize the performance of new prospective spacecraft materials when subjected to the synergistic effects of the space environment. Telemetry, command, control, and communication (TNC) for the FTSCE will be achieved through the Amateur Satellite Service using the PCSat2 system, which is an Amateur Radio system designed and built by the USNA. In addition to providing an off-the-shelf solution for FTSCE TNC, PCSat2 will provide a communications node for the Amateur Radio satellite system. The FTSCE and PCSat2 will be housed within the passive experiment container (PEC), which is an approximately 2ft x2ft x 4in metal container built by NASA Langley Research Center (NASA LaRC) as part of the MISSE-5 program. NASA LaRC has also supplied a thin film materials experiment that will fly on the exterior of the thermal blanket covering the PCSat2. The PEC is planned to be transported to the ISS on a Shuttle flight. The PEC will be mounted on the exterior of the ISS by an astronaut during an extravehicular activity (EVA). After nominally one year, the PEC will be retrieved and returned to Earth. At the time of writing this paper, the
International Conference on Emerging Research in Electronics, Computer Science and Technology
Sheshadri, Holalu; Padma, M
2014-01-01
PES College of Engineering is organizing an International Conference on Emerging Research in Electronics, Computer Science and Technology (ICERECT-12) in Mandya and merging the event with Golden Jubilee of the Institute. The Proceedings of the Conference presents high quality, peer reviewed articles from the field of Electronics, Computer Science and Technology. The book is a compilation of research papers from the cutting-edge technologies and it is targeted towards the scientific community actively involved in research activities.
Ultimate internal pressure capacity of a reinforced concrete Mark III containment
International Nuclear Information System (INIS)
McGaughy, J.P. Jr.; Lin, F.T.; Sen, S.K.
1983-01-01
The static ultimate capacity of a Mark III BWR pressure suppression type containment has been investigated with a view to determine its capability to withstand the internal pressure associated with a postulated hydrogen burn. The reinforced concrete containment consists of a right circular cylinder covered by a hemispherical dome and supported on a flat circular foundation mat. A 1/4'' thick welded steel liner plate covers the inside surface of the containment shell. The cylinder is a 3.5 ft. thick shell with an inside radius of 62.0 feet. The thickness of the dome is 3.5 feet. Reinforcement in the shell is comprised of multi-layers of circumferential, meridional and diagonal rebars. Major containment penetrations consists of a circular equipment hatch and two personnel airlock assemblies. The containment ultimate capacity is determined by performing a non-linear analysis using the proprietary finite element computer code 'FINEL'. The code has the capability of modelling concrete cracking in tension and redistribution forces and moments to account for such phenomenon. For analysis purposes, the finite element model included the containment dome and the upper portion of the containment cylinder with appropriate boundary conditions applied at the model cut off region. This portion of the containment structure is selected because the segment of the cylinder that is included in the model has the least amount of hopp reinforcement, and when the general yield state is reached, the hoop reinforcement will be the limiting element. The containment structure has been treated as an axisymmetric shell using axisymmetric quadrilateral finite elements in the radial plane to model the liner plate and concrete. The reinforcing steel have been idealized by finite elements with unidirectional stiffness. (orig./RW)
Cargo container inspection test program at ARPA's Nonintrusive Inspection Technology Testbed
Volberding, Roy W.; Khan, Siraj M.
1994-10-01
An x-ray-based cargo inspection system test program is being conducted at the Advanced Research Project Agency (ARPA)-sponsored Nonintrusive Inspection Technology Testbed (NITT) located in the Port of Tacoma, Washington. The test program seeks to determine the performance that can be expected from a dual, high-energy x-ray cargo inspection system when inspecting ISO cargo containers. This paper describes an intensive, three-month, system test involving two independent test groups, one representing the criminal smuggling element and the other representing the law enforcement community. The first group, the `Red Team', prepares ISO containers for inspection at an off-site facility. An algorithm randomly selects and indicates the positions and preparation of cargoes within a container. The prepared container is dispatched to the NITT for inspection by the `Blue Team'. After in-gate processing, it is queued for examination. The Blue Team inspects the container and decides whether or not to pass the container. The shipment undergoes out-gate processing and returns to the Red Team. The results of the inspection are recorded for subsequent analysis. The test process, including its governing protocol, the cargoes, container preparation, the examination and results available at the time of submission are presented.
Development of Technology for Enrichment of Silver Containing Ores
Shekiladze, Asmati; Kavtelashvili, Otari; Bagnashvili, Mamuka
2016-10-01
The progress of Georgian economics is substantially associated with a development of new deposits of mineral resources. Among them is the David-Gareji deposit where at present the intensive searching geological works are performed. The work goal involves the elaboration of the technology for processing of silver-containing quartz-barite ores. Without its development the mining of more valuable gold-polymetallic ores is impossible. Because of ore complexity silver and barite are considered in a common technological aspect. The investigations were carried out on the representative samples of quartz-barite ores containing 78-88 g/ton of silver and 27-29 % of silver is a nugget in the form of the simple sulphides and chlorides. The ore is characterized by fine coalescence of barite and ore-generating minerals. Non-ferrous metals haven't any industrial value because of their very low content. Therefore, for the processing of the ores under study the direct selective scheme of flotation enrichment was chosen and the formula of optimal reagent regime was elaborated. Potassium xanthogenate is used as a collector for flotation of silver minerals and pine oil- as a foaming agent. The effect of the pulp - pH and medium temperature on silver flotation was studied. It was established that the silver is actively floats in neutral medium. For barite flotation the various collectors were tested: sulfidezid cotton oil-soap stock, soaps of fatty acids and alkyl sulphates of C12 - C16 row, among the “Baritol” is the most efficient one. Depression of the barren rock was carried out by liquid glass in alkaline medium. The effect of pulp pH on barite flotation has been investigated. The best results were obtained at pH=8.5. The increase of the pulp alkalinity has no essential effect on the indexes of the barite enrichment. Conditional concentrate of the barite is obtained by two fold purification of the main flotation concentrate by the addition of the liquid glass to the re
DEFF Research Database (Denmark)
Li-Ying, Jason; Wang, Yuandi
2013-01-01
. However, we have also witnessed an emerging trend of external acquisition of technology by EMFs firms in both international and domestic markets. Why some EMFs are active in sourcing both domestic and international technologies instead of being significantly in favour of foreign technologies from...... framework. Based on a unique sample of 389 Chinese firms on their inward technology licensing activities through an observation period from 2000 to 2005, it is found that (1) firms’ international market orientation; (2) firm’s technological capability; (3) regional innovation capability; and (4......External technology sourcing from developed countries has been one of the most important vehicles by which emerging market firms (EMFs) sustain competiveness. Foreign advanced technologies offer EMFs opportunities to gain access to state-of-the-art technologies and upgrade their competitiveness...
International Conference on Intelligent Technologies and Engineering System (ICITES 2012)
Huang, Yi-Cheng; Intelligent Technologies and Engineering Systems
2013-01-01
This book concentrates on intelligent technologies as it relates to engineering systems. The book covers the following topics: networking, signal processing, artificial intelligence, control and software engineering, intelligent electronic circuits and systems, communications, and materials and mechanical engineering. The book is a collection of original papers that have been reviewed by technical editors. These papers were presented at the International Conference on Intelligent Technologies and Engineering Systems, held Dec. 13-15, 2012.
International Nuclear Information System (INIS)
2015-01-01
This meeting paper contains presentations of two conferences: SENSOR 2015 and IRS 2 (= International conference on InfraRed Sensors and systems). The first part of SENSOR 2015 contains the following chapters: (A) SENSOR PRINCIPLES: A.1: Mechanical sensors; A.2: Optical sensors; A.3: Ultrasonic sensors; A.4: Microacoustic sensors; A.5: Magnetic sensors; A.6: Impedance sensors; A.7: Gas sensors; A.8: Flow sensors; A.9: Dimensional measurement; A.10: Temperature and humidity sensors; A.11: Chemosensors; A.12: Biosensors; A.13: Embedded sensors; A.14: Sensor-actuator systems; (B) SENSOR TECHNOLOGY: B.1: Sensor design; B.2: Numerical simulation of sensors; B.3: Sensor materials; B.4: MEMS technology; B.5: Micro-Nano-Integration; B.6: Packaging; B.7: Materials; B.8: Thin films; B.9: Sensor production; B.10: Sensor reliability; B.11: Calibration and testing; B.12: Optical fibre sensors. (C) SENSOR ELECTRONICS AND COMMUNICATION: C.1: Sensor electronics; C.2: Sensor networks; C.3: Wireless sensors; C.4: Sensor communication; C.5: Energy harvesting; C.6: Measuring systems; C.7: Embedded systems; C.8: Self-monitoring and diagnosis; (D) APPLICATIONS: D.1: Medical measuring technology; D.2: Ambient assisted living; D.3: Process measuring technology; D.4: Automotive; D.5: Sensors in energy technology; D.6: Production technology; D.7: Security technology; D.8: Smart home; D.9: Household technology. The second part with the contributions of the IRS 2 2015 is structured as follows: (E) INFRARED SENSORS: E.1: Photon detectors; E.2: Thermal detectors; E.3: Cooled detectors; E.4: Uncooled detectors; E.5: Sensor modules; E.6: Sensor packaging. (G) INFRARED SYSTEMS AND APPLICATIONS: G.1: Thermal imaging; G.2: Pyrometry / contactless temperature measurement; G.3: Gas analysis; G.4: Spectroscopy; G.5: Motion control and presence detection; G.6: Security and safety monitoring; G.7: Non-destructive testing; F: INFRARED SYSTEM COMPONENTS: F.1: Infrared optics; F.2: Optical modulators; F.3
International Nuclear Information System (INIS)
Sharipova, N.S.
1999-01-01
This issue contains papers, which reflect the most important achievements of new technologies in power engineering, transport, oil industry, machinery construction, building construction and information technologies presented to the International Scientific and Technical Conference: New technologies in Islamic countries, which was organized within frame work of 6 General Assembly of Federation of Engineering Institutes of Islamic Countries (FEIIC). (author)
László, Gömze A.
2013-12-01
Competitiveness is one of the most important factors in our life and it plays a key role in the efficiency both of organizations and societies. The more scientifically supported and prepared organizations develop more competitive materials with better physical, chemical and biological properties and the leading companies apply more competitive equipment and technology processes. The aims of the 2nd International Conference on Competitive Materials and Technology Processes (ic-cmtp2) are the following: Promote new methods and results of scientific research in the fields of material, biological, environmental and technology sciences; Change information between the theoretical and applied sciences as well as technical and technological implantations. Promote the communication between the scientist of different nations, countries and continents. Among the major fields of interest are materials with extreme physical, chemical, biological, medical, thermal, mechanical properties and dynamic strength; including their crystalline and nano-structures, phase transformations as well as methods of their technological processes, tests and measurements. Multidisciplinary applications of materials science and technological problems encountered in sectors like ceramics, glasses, thin films, aerospace, automotive and marine industry, electronics, energy, construction materials, medicine, biosciences and environmental sciences are of particular interest. In accordance to the program of the conference ic-cmtp2, more than 250 inquiries and registrations from different organizations were received. Researchers from 36 countries in Asia, Europe, Africa, North and South America arrived at the venue of conference. Including co-authors, the research work of more than 500 scientists are presented in this volume. Professor Dr Gömze A László Chair, ic-cmtp2 The PDF also contains lists of the boards, session chairs and sponsors.
Overview of international fusion technology programs
International Nuclear Information System (INIS)
Coffman, F.E.; Baublitz, J.E.; Beard, D.S.; Cohen, M.M.; Dalder, E.N.C.; Finfgeld, C.R.; Haas, G.M.; Head, C.R.; Murphy, M.R.; Nardella, G.R.
1979-01-01
World fusion technology programs, as well as current progress and future plans for the U.S., are discussed. Regarding conceptual design, the international INTOR tokamak study, the Garching Ignition Test Reactor Study, the U.S. Engineering Test Facility conceptual design, the Argonne National Laboratory Commercial Tokamak Study, mirror conceptual designs, and alternate concepts and applications studies are summarized. With regard to magnetics, progress to date in the large coil program and pulsed coil program is summarized. In the area of plasma heating and fueling and exhaust, work on a new positive ion source research and development program at Lawrence Berkeley Laboratory and Oak Ridge National Laboratory is described, as is negative ion work. Tradeoff considerations for radio-frequency heating alternatives are made, and a new 60-100 GHz electron cyclotron heating research and development program is discussed. Progress and plans for solid hydrogen pellet injector development are analyzed, as are plans for a divertor technology initiative. A brief review of the U.S. alternate applications and environment and safety program is included
Key energy technologies for Europe
Energy Technology Data Exchange (ETDEWEB)
Holst Joergensen, Birte
2005-09-01
The report is part of the work undertaken by the High-Level Expert Group to prepare a report on emerging science and technology trends and the implications for EU and Member State research policies. The outline of the report is: 1) In the introductory section, energy technologies are defined and for analytical reasons further narrowed down; 2) The description of the socio-economic challenges facing Europe in the energy field is based on the analysis made by the International Energy Agency going back to 1970 and with forecasts to 2030. Both the world situation and the European situation are described. This section also contains an overview of the main EU policy responses to energy. Both EU energy R and D as well as Member State energy R and D resources are described in view of international efforts; 3) The description of the science and technology base is made for selected energy technologies, including energy efficiency, biomass, hydrogen, and fuel cells, photovoltaics, clean fossil fuel technologies and CO{sub 2} capture and storage, nuclear fission and fusion. When possible, a SWOT is made for each technology and finally summarised; 4) The forward look highlights some of the key problems and uncertainties related to the future energy situation. Examples of recent energy foresights are given, including national energy foresights in Sweden and the UK as well as links to a number of regional and national foresights and roadmaps; 5) Appendix 1 contains a short description of key international organisations dealing with energy technologies and energy research. (ln)
Key energy technologies for Europe
International Nuclear Information System (INIS)
Holst Joergensen, Birte
2005-09-01
The report is part of the work undertaken by the High-Level Expert Group to prepare a report on emerging science and technology trends and the implications for EU and Member State research policies. The outline of the report is: 1) In the introductory section, energy technologies are defined and for analytical reasons further narrowed down; 2) The description of the socio-economic challenges facing Europe in the energy field is based on the analysis made by the International Energy Agency going back to 1970 and with forecasts to 2030. Both the world situation and the European situation are described. This section also contains an overview of the main EU policy responses to energy. Both EU energy R and D as well as Member State energy R and D resources are described in view of international efforts; 3) The description of the science and technology base is made for selected energy technologies, including energy efficiency, biomass, hydrogen, and fuel cells, photovoltaics, clean fossil fuel technologies and CO 2 capture and storage, nuclear fission and fusion. When possible, a SWOT is made for each technology and finally summarised; 4) The forward look highlights some of the key problems and uncertainties related to the future energy situation. Examples of recent energy foresights are given, including national energy foresights in Sweden and the UK as well as links to a number of regional and national foresights and roadmaps; 5) Appendix 1 contains a short description of key international organisations dealing with energy technologies and energy research. (ln)
Software Technologies - 8th International Joint Conference, ICSOFT 2013 : Revised Selected Papers
Cordeiro, José; van Sinderen, Marten J.
2014-01-01
The present book includes extended and revised versions of a set of selected papers from the 8th International Joint Conference on Software Technologies (ICSOFT 2013), which was co-organized by the Reykjavik University (RU) and sponsored by the Institute for Systems and Technologies of Information,
3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications
Koziel, Slawomir; Kacprzyk, Janusz; Leifsson, Leifur; Ören, Tuncer
2015-01-01
This book includes extended and revised versions of a set of selected papers from the 3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2013) which was co-organized by the Reykjavik University (RU) and sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC). SIMULTECH 2013 was held in cooperation with the ACM SIGSIM - Special Interest Group (SIG) on SImulation and Modeling (SIM), Movimento Italiano Modellazione e Simulazione (MIMOS) and AIS Special Interest Group on Modeling and Simulation (AIS SIGMAS) and technically co-sponsored by the Society for Modeling & Simulation International (SCS), Liophant Simulation, Simulation Team and International Federation for Information Processing (IFIP). This proceedings brings together researchers, engineers, applied mathematicians and practitioners working in the advances and applications in the field of system simulation.
International Facility for Food Irradiation Technology
International Nuclear Information System (INIS)
Farkas, J.
1982-01-01
The International Facility for Food Irradiation Technology (IFFIT) was set up in November 1978 for a period of five years at the Pilot Plant for Food Irradiation, Wageningen, The Netherlands under an Agreement between the FAO, IAEA and the Ministry of Agriculture and Fisheries of the Government of the Netherlands. Under this Agreement, the irradiation facilities, office space and services of the Pilot Plant for Food Irradiation are put at IFFIT's disposal. Also the closely located Research Foundation, ITAL, provides certain facilities and laboratory services within the terms of the Agreement. The FAO and IAEA contribute US-Dollar 25,000. Annually for the duration of IFFIT. (orig.) [de
Watanabe, Toyohide; Phillips-Wren, Gloria; Howlett, Robert; Jain, Lakhmi
2012-01-01
The Intelligent Decision Technologies (IDT) International Conference encourages an interchange of research on intelligent systems and intelligent technologies that enhance or improve decision making. The focus of IDT is interdisciplinary and includes research on all aspects of intelligent decision technologies, from fundamental development to real applications. IDT has the potential to expand their support of decision making in such areas as finance, accounting, marketing, healthcare, medical and diagnostic systems, military decisions, production and operation, networks, traffic management, crisis response, human-machine interfaces, financial and stock market monitoring and prediction, and robotics. Intelligent decision systems implement advances in intelligent agents, fuzzy logic, multi-agent systems, artificial neural networks, and genetic algorithms, among others. Emerging areas of active research include virtual decision environments, social networking, 3D human-machine interfaces, cognitive interfaces,...
Innovation and international technology transfer: The case of the Chinese photovoltaic industry
International Nuclear Information System (INIS)
De la Tour, A.; Glachant, M.; Meniere, Y.
2010-01-01
China is the largest solar photovoltaic cell producer in the world, with more than one third of worldwide production in 2008, exporting more than 95 percent of what it produces. The purpose of this paper is to understand the drivers of this success and its limits, with a particular emphasis on the role of technology transfers and innovation. Our analysis combines a review of international patent data at a detailed technology level with field interviews of ten Chinese PV companies. We show that Chinese producers have acquired the technologies and skills necessary to produce PV products through two main channels: the purchasing of manufacturing equipment in a competitive international market and the recruitment of skilled executives from the Chinese Diaspora who built pioneer PV firms. The success of these firms in their market is, however, not reflected in their performance in terms of innovation. Rather, patent data rather highlight a policy-driven effort to catch up in critical technological areas. (authors)
Innovation and international technology transfer: The case of the Chinese photovoltaic industry
Energy Technology Data Exchange (ETDEWEB)
De la Tour, A.; Glachant, M.; Meniere, Y.
2010-07-01
China is the largest solar photovoltaic cell producer in the world, with more than one third of worldwide production in 2008, exporting more than 95 percent of what it produces. The purpose of this paper is to understand the drivers of this success and its limits, with a particular emphasis on the role of technology transfers and innovation. Our analysis combines a review of international patent data at a detailed technology level with field interviews of ten Chinese PV companies. We show that Chinese producers have acquired the technologies and skills necessary to produce PV products through two main channels: the purchasing of manufacturing equipment in a competitive international market and the recruitment of skilled executives from the Chinese Diaspora who built pioneer PV firms. The success of these firms in their market is, however, not reflected in their performance in terms of innovation. Rather, patent data rather highlight a policy-driven effort to catch up in critical technological areas. (authors)
Innovation and international technology transfer: The case of the Chinese photovoltaic industry
Energy Technology Data Exchange (ETDEWEB)
Tour, Arnaud de la; Glachant, Matthieu; Meniere, Yann [Cerna, Mines ParisTech, 60 Boulevard Saint Michel, 75006 Paris (France)
2011-02-15
China is the largest solar photovoltaic cell producer in the world, with more than one third of worldwide production in 2008, exporting more than 95 percent of what it produces. The purpose of this paper is to understand the drivers of this success and its limits, with a particular emphasis on the role of technology transfers and innovation. Our analysis combines a review of international patent data at a detailed technology level with field interviews of ten Chinese PV companies. We show that Chinese producers have acquired the technologies and skills necessary to produce PV products through two main channels: the purchasing of manufacturing equipment in a competitive international market and the recruitment of skilled executives from the Chinese diaspora who built pioneer PV firms. The success of these firms in their market is, however, not reflected in their performance in terms of innovation. Rather, patent data highlight a policy-driven effort to catch up in critical technological areas. (author)
Steenhuis, H.J.; de Bruijn, E.J.
2005-01-01
International technology transfer occurs frequently in international operations, for example in cases of foreign direct investment where companies set-up existing manufacturing lines in new locations. It also occurs in situations of international outsourcing where a new supplier receives product
International Conference on Emerging Trends in Science, Engineering and Technology
Caroline, B; Jayanthi, J
2012-01-01
The present book is based on the research papers presented in the International Conference on Emerging Trends in Science, Engineering and Technology 2012, held at Tiruchirapalli, India. The papers presented bridges the gap between science, engineering and technology. This book covers a variety of topics, including mechanical, production, aeronautical, material science, energy, civil and environmental energy, scientific management, etc. The prime objective of the book is to fully integrate the scientific contributions from academicians, industrialists and research scholars.
International Scientist Mobility and the Locus of Knowledge and Technology Transfer
DEFF Research Database (Denmark)
Edler, Jakob; Fier, Hedie; Grimpe, Christoph
2011-01-01
Despite the growing interest of scholars and policymakers to better understand the determinants for researchers in public science to transfer knowledge and technology to firms, little is known how temporary international mobility of scientists affects both their propensity to engage in knowledge ...... circulation”. The article contributes to the growing strand of the literature on scientist mobility and on the determinants of industry–science linkages at the individual level.Scientist......Despite the growing interest of scholars and policymakers to better understand the determinants for researchers in public science to transfer knowledge and technology to firms, little is known how temporary international mobility of scientists affects both their propensity to engage in knowledge...... and technology transfer (KTT) as well as the locus of such transfer. Based on a sample of more than 950 German academics from science and engineering faculties, we investigate how the duration and the frequency of scientists’ visits at research institutions outside their home country affect KTT activities. We...
Energy Technology Data Exchange (ETDEWEB)
Park, Hyung Kui; Hahm, Dea Gi; Choi, In Kil [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)
2013-10-15
The sensitivity of the concrete strength is relatively higher compared to that of the steel strength. According to changes in the structure of the material, about 6-10% ultimate internal pressure differences occurred. Thirty sets of an FE model considering the material uncertainty of concrete and steel were composed for the internal pressure fragility assessment. From the internal pressure fragility assessment of the target containment building, the median capacity of liner leakage is estimated to be 116 psi. As can be seen from the Fukushima nuclear power plant accident, the containment building is the final protecting shield to prevent radiation leakage. Thus, a structural soundness evaluation for the containment pressure loads owing to a severe accident is very important. Recently, a probabilistic safety assessment has been commonly used to take into account the possible factors of uncertainty in a structural system. An assessment of the internal pressure fragility of the CANDU type containment buildings considering the correlation of structural material variables, and an assessment of the internal pressure fragility of the CANDU type containment buildings using a nonlinear finite element analysis, were also performed. However, for PWR type containment buildings, a fragility assessment has not been performed yet using a nonlinear finite element model (FEM) analysis. In this study, for the Hanul NPP units 3 and 4 containment building, the internal pressure fragility assessment was established using an FEM analysis. To do this, a three-dimensional finite element model, material property values, and a sensitive analysis were developed. A nonlinear finite element analysis of the Hanul NPP units 3 and 4 containment building was performed for a material sensitivity analysis and internal pressure fragility assessment.
International Nuclear Information System (INIS)
Park, Hyung Kui; Hahm, Dea Gi; Choi, In Kil
2013-01-01
The sensitivity of the concrete strength is relatively higher compared to that of the steel strength. According to changes in the structure of the material, about 6-10% ultimate internal pressure differences occurred. Thirty sets of an FE model considering the material uncertainty of concrete and steel were composed for the internal pressure fragility assessment. From the internal pressure fragility assessment of the target containment building, the median capacity of liner leakage is estimated to be 116 psi. As can be seen from the Fukushima nuclear power plant accident, the containment building is the final protecting shield to prevent radiation leakage. Thus, a structural soundness evaluation for the containment pressure loads owing to a severe accident is very important. Recently, a probabilistic safety assessment has been commonly used to take into account the possible factors of uncertainty in a structural system. An assessment of the internal pressure fragility of the CANDU type containment buildings considering the correlation of structural material variables, and an assessment of the internal pressure fragility of the CANDU type containment buildings using a nonlinear finite element analysis, were also performed. However, for PWR type containment buildings, a fragility assessment has not been performed yet using a nonlinear finite element model (FEM) analysis. In this study, for the Hanul NPP units 3 and 4 containment building, the internal pressure fragility assessment was established using an FEM analysis. To do this, a three-dimensional finite element model, material property values, and a sensitive analysis were developed. A nonlinear finite element analysis of the Hanul NPP units 3 and 4 containment building was performed for a material sensitivity analysis and internal pressure fragility assessment
Directory of Open Access Journals (Sweden)
Encarnación García-Sánchez
2018-03-01
Full Text Available Organizational innovation is increasingly mandatory for firms to overcome their competitors. Organizational innovation is especially relevant in today’s dynamic and turbulent environments, where other internal variables—such as technological assets, employee training, coordination of new management capabilities, and new flexible human resources and more adaptable organizational designs—must be encouraged to create value and competitive advantage. The purpose of our research is to analyse whether technological assets influence absorptive capacity (potential and realized absorptive capacity and how absorptive capacity influences internal labour flexibility, organizational innovation and performance. We achieve these goals by analysing the interrelations among internal labour flexibility, organizational innovation and performance, using the theory of resources and capabilities. A quantitative study was carried out with data gathered by personal interview using a structured questionnaire. Relationships proposed in the theoretical model were estimated through a structural equation model, using a sample of 160 European technology companies. The results show that support for technology and improvement of technological skills and technological distinctive competencies promote improvement in organizational performance through their positive influence on the processes of potential and realized absorption capacity. Potential absorptive capacity influences realized absorptive capacity, which impacts not only internal labour flexibility but also organizational innovation and organizational performance. Further, internal labour flexibility influences organizational performance through organizational innovation. This issue is of particular interest when considering the dynamic nature of turbulent technological environments in which the organization operates. Technological assets thus identify new sources of flexibility and organizational innovation based
International Conference on Microelectronics, Electromagnetics and Telecommunications
Rao, N; Kumar, S; Raj, C; Rao, V; Sarma, G
2016-01-01
This volume contains 73 papers presented at ICMEET 2015: International Conference on Microelectronics, Electromagnetics and Telecommunications. The conference was held during 18 – 19 December, 2015 at Department of Electronics and Communication Engineering, GITAM Institute of Technology, GITAM University, Visakhapatnam, INDIA. This volume contains papers mainly focused on Antennas, Electromagnetics, Telecommunication Engineering and Low Power VLSI Design.
International Nuclear Information System (INIS)
Kitchen, B.G.
1989-01-01
The nearly completed Defense Waste Processing Facility (DWPF) is a Department of Energy (DOE) facility at the Savannah River Site that is designed to immobilize defense high level radioactive waste (HLW) by vitrification in borosilicate glass and containment in stainless steel canisters suitable for storage in the future DOE HLW repository. The DWPF is expected to start cold operation later this year (1990), and will be the first full scale vitrification facility operating in the United States, and the largest in the world. The DOE has been coordinating technology transfer and exchange on issues relating to HLW treatment and disposal through bi-lateral agreements with several nations. For the nearly fifteen years of the vitrification program at Savannah River Laboratory, over two hundred exchanges have been conducted with a dozen international agencies involving about five-hundred foreign national specialists. These international exchanges have been beneficial to the DOE's waste management efforts through confirmation of the choice of the waste form, enhanced understanding of melter operating phenomena, support for paths forward in political/regulatory arenas, confirmation of costs for waste form compliance programs, and establishing the need for enhancements of melter facility designs. This paper will compare designs and schedules of the international vitrification programs, and will discuss technical areas where the exchanges have provided data that have confirmed and aided US research and development efforts, impacted the design of the DWPF and guided the planning for regulatory interaction and product acceptance
Chao, Han-Chieh; Arabnia, Hamid; Yen, Neil; Advanced Multimedia and Ubiquitous Engineering : Future Information Technology; MUE-15; FutureTech 2015
This volume brings together contributions representing the state-of-the-art in new multimedia and future technology information research, currently a major topic in computer science and electronic engineering. Researchers aim to interoperate multimedia frameworks, transforming the way people work and interact with multimedia data. This book covers future information technology topics including digital and multimedia convergence, ubiquitous and pervasive computing, intelligent computing and applications, embedded systems, mobile and wireless communications, bio-inspired computing, grid and cloud computing, semantic web, human-centric computing and social networks, adaptive and context-aware computing, security and trust computing and related areas. Representing the combined proceedings of the 9th International Conference on Multimedia and Ubiquitous Engineering (MUE-15) and the 10th International Conference on Future Information Technology (FutureTech 2015), this book aims to provide a complete coverage of...
UNHCR and the pursuit of international protection: accountability through technology?
DEFF Research Database (Denmark)
Jacobsen, Katja Lindskov; Sandvik, Kristin B.
2018-01-01
Better management and new technological solutions are increasingly portrayed as the way to improve refugee protection and enhance the accountability of humanitarian actors. Taking concepts of legibility, quantification and co-production as the point of departure, this article explores how techno-bureaucratic...... practices shape conceptions of international refugee protection. We do this by examining the evolving roles of results-based management (RBM), biometrics and cash-based interventions as ‘accountability technologies’ in the United Nations High Commissioner for Refugees’ international protection efforts...
International Nuclear Information System (INIS)
Yang, Maeng Ho; Kim, Hwa Sup; Kim, Ji Whan; Lee, Dong Jin; Kim, Jong Sook; Kim, Hyun Joon; Yoon, Young Woo; Ham, Chul Hoon; Cho, Suck Hong
1992-12-01
The main objective of this study is to suggest future policy directions of national nuclear technology development and to define the role of nuclear power in the post-coldwar era. This study first reviews how the collapse of USSR have exerted subsequent effects on the international nuclear industry and analyses the efforts of the multinational nuclear enterprises to obtain technological, competitiveness and to expand the share in the international nuclear market in order to compete the economical and technological superiority. Finally, this study analyses scenarios for the global environmental regulations which may be imposed over internationally in the near future. This study suggests; firstly, increasing investment on science and technology, secondly, diversifying international cooperation, thirdly, rearranging and strengthening a national system for information collecting and analysis, fourthly, making up infrastructure to expand the role of nuclear power, fifthly, expanding the applications of nuclear energy including district heating, etc. (Author)
[Innovative educational technology in the teaching of propaedeutic of internal diseases].
Тusupbekova, К; Bakirova, R; Nursultanova, S
2015-03-01
This article presents analysis of the results of inculcation of innovative learning technologies in teaching on propaedeutic of internal diseases which is first clinical discipline faced by medical students of the University. Credit-modular training included integration of propaedeutic of internal diseases with basic disciplines of the third year (the normal anatomy, physiology, pathological anatomy, histology, pathophysiology, visual diagnostics and pharmacology). There are 8 models on following systems: respiratory, cardiovascular, musculoskeletal, endocrine, urogenital, hematopoietic, nervous, digestive. The innovative implementation of learning technologies (Problem-based learning, clinical cases, team-oriented teaching, lectures, symposium lectures, discussions, role plays, etc.) and knowledge control (mini-clinical examination, objective structured clinical exam, comprehensive testing) help students to acquire clinical skills, team working and skills of researching work.
Andrade, Priscila Almeida; Carvalho, Denise Bomtempo Birche de
2015-01-01
Since 1990, international organizations have been increasingly involved in building an international sub-regime for research, development and innovation in health. This article analyzes the priorities of developing countries in health since the 1990s. It is a descriptive and analytical study that investigates the literature and contributions of key informants. Calling for the end of global inequities in the support for science and technology in health, international organizations recommend that developing countries focus their efforts on neglected diseases and operational research, an insufficient agenda for science and technology cooperation to effectively overcome the vulnerabilities between countries.
Energy Technology Data Exchange (ETDEWEB)
NONE
2015-07-01
This meeting paper contains presentations of two conferences: SENSOR 2015 and IRS{sup 2} (= International conference on InfraRed Sensors and systems). The first part of SENSOR 2015 contains the following chapters: (A) SENSOR PRINCIPLES: A.1: Mechanical sensors; A.2: Optical sensors; A.3: Ultrasonic sensors; A.4: Microacoustic sensors; A.5: Magnetic sensors; A.6: Impedance sensors; A.7: Gas sensors; A.8: Flow sensors; A.9: Dimensional measurement; A.10: Temperature and humidity sensors; A.11: Chemosensors; A.12: Biosensors; A.13: Embedded sensors; A.14: Sensor-actuator systems; (B) SENSOR TECHNOLOGY: B.1: Sensor design; B.2: Numerical simulation of sensors; B.3: Sensor materials; B.4: MEMS technology; B.5: Micro-Nano-Integration; B.6: Packaging; B.7: Materials; B.8: Thin films; B.9: Sensor production; B.10: Sensor reliability; B.11: Calibration and testing; B.12: Optical fibre sensors. (C) SENSOR ELECTRONICS AND COMMUNICATION: C.1: Sensor electronics; C.2: Sensor networks; C.3: Wireless sensors; C.4: Sensor communication; C.5: Energy harvesting; C.6: Measuring systems; C.7: Embedded systems; C.8: Self-monitoring and diagnosis; (D) APPLICATIONS: D.1: Medical measuring technology; D.2: Ambient assisted living; D.3: Process measuring technology; D.4: Automotive; D.5: Sensors in energy technology; D.6: Production technology; D.7: Security technology; D.8: Smart home; D.9: Household technology. The second part with the contributions of the IRS{sup 2} 2015 is structured as follows: (E) INFRARED SENSORS: E.1: Photon detectors; E.2: Thermal detectors; E.3: Cooled detectors; E.4: Uncooled detectors; E.5: Sensor modules; E.6: Sensor packaging. (G) INFRARED SYSTEMS AND APPLICATIONS: G.1: Thermal imaging; G.2: Pyrometry / contactless temperature measurement; G.3: Gas analysis; G.4: Spectroscopy; G.5: Motion control and presence detection; G.6: Security and safety monitoring; G.7: Non-destructive testing; F: INFRARED SYSTEM COMPONENTS: F.1: Infrared optics; F.2: Optical
2011-07-07
... dated July 18, 2002, the International Center for Technology Assessment and the Center for Food Safety... Inspection Service [Docket No. APHIS-2011-0081] International Center for Technology Assessment and the Center for Food Safety; Noxious Weed Status of Kentucky Bluegrass Genetically Engineered for Herbicide...
EM International, July 1994, Volume 2
International Nuclear Information System (INIS)
1994-01-01
The Office of Environmental Management (EM) at the Department of Energy (DOE) is seeking out and leveraging foreign technology, data, and resources in keeping with EM's mandate to protect public health and the environment through the safe and cost-effective remediation of the Department's nuclear weapons sites. EM works closely with foreign governments, industry, and universities to obtain innovative environmental technologies, scientific and engineering expertise, and operations experience that will support EM's objectives. Where appropriate, these international resources are used to manage the more urgent risks at our sites, secure a safe workplace, help build consensus on critical issues, and strengthen our technology development program. Through international agreements EM engages in cooperative exchange of information, technology, and individuals. Currently, we are managing agreements with a dozen countries in Europe, Latin America, and Asia. These agreements focus on environmental restoration, waste management, transportation of radioactive wastes, and decontamination and decommissioning. This publication contains the following articles: in situ remediation integrated program; in-situ characterization and inspection of tanks; multimedia environmental pollutant assessment system (MEPAS); LLNL wet oxidation -- AEA technology. Besides these articles, this publication covers: EU activities with Russia; technology transfer activities; and international organization activities
The fourth international energy agency international workshop on beryllium technology for fusion
International Nuclear Information System (INIS)
Scaffidi-Argentina, F.; Longhurst, G.R.
2000-01-01
The main objective of the workshop was to support the advancement of the international development of fusion power through communication and dissemination of information on progress made in beryllium technology. This has been accomplished through presentation of original research on issues of current interest to the fusion beryllium community. The workshop was divided into ten technical sessions that addressed the following general topics: production and characterization, health and safety, forming and joining, chemical compatibility, thermal-mechanical properties, pebble bed behavior, high-heat-flux performance, irradiation effects, plasma-tritium interaction, and molten beryllium-bearing salts
The fourth international energy agency international workshop on beryllium technology for fusion
Energy Technology Data Exchange (ETDEWEB)
Scaffidi-Argentina, F.; Longhurst, G.R.
2000-05-01
The main objective of the workshop was to support the advancement of the international development of fusion power through communication and dissemination of information on progress made in beryllium technology. This has been accomplished through presentation of original research on issues of current interest to the fusion beryllium community. The workshop was divided into ten technical sessions that addressed the following general topics: production and characterization, health and safety, forming and joining, chemical compatibility, thermal-mechanical properties, pebble bed behavior, high-heat-flux performance, irradiation effects, plasma-tritium interaction, and molten beryllium-bearing salts.
Technology Demonstration of Wet Abrasive Blasting for Removal of Lead- and Asbestos-Containing Paint
National Research Council Canada - National Science Library
Race, Timothy
2003-01-01
...). This technology demonstration showed that wet blasting using an engineered abrasive can safely and effectively remove lead- and asbestos-containing paint from exterior concrete masonry unit walls...
Sinkovics, Rudolf R.; Haghirian, Parissa; Yu, Shasha
2009-01-01
Information technology (IT) innovations have and continue to have a significant impact on international marketing practice and customer interactions. With the marketing environment becoming increasingly dependent on technology, marketing teaching in higher education faces a challenging task of effectively leveraging technology in diverse learning…
Technology Experiences of Student Interns in a One to One Mobile Program
Cullen, Theresa A.; Karademir, Tugra
2018-01-01
This article describes how a group of student intern teachers (n = 51) in a one to one teacher education iPad program were asked to reflect using Experience Sampling Method (ESM) on their use of technology in the classroom during internship. Interns also completed summative reflections and class discussions. Data collected both in online and…
Technology, International Trade, and Pollution from US Manufacturing
Arik Levinson
2009-01-01
Pollution emitted by US manufacturers declined markedly over the past several decades, even as real manufacturing output increased. I first show that most of the decline in US manufacturing pollution has resulted from changing production processes ("technology"), rather than changes in the mix of goods produced. I then show that increased net imports of polluting goods ("international trade") accounts for only a small portion of the pollution reductions from the changing mix of goods. Togethe...
Chen, Shu-Ching; Choo, Kim-Kwang
2017-01-01
This book presents the proceedings of the 11th International Conference on Multimedia and Ubiquitous Engineering (MUE2017) and the 12th International Conference on Future Information Technology (FutureTech2017), held in Seoul, South Korea on May 22–24, 2017. These two conferences provided an opportunity for academic and industrial professionals to discuss recent advances in the area of multimedia and ubiquitous environments including models and systems, new directions, and novel applications associated with the utilization and acceptance of ubiquitous computing devices and systems. The resulting papers address the latest technological innovations in the fields of digital convergence, multimedia convergence, intelligent applications, embedded systems, mobile and wireless communications, bio-inspired computing, grid and cloud computing, semantic web, user experience, HCI, and security and trust computing. The book offers a valuable resource for a broad readership, including students, academic researchers, and...
International Energy and Environmental Congress: Proceedings
Energy Technology Data Exchange (ETDEWEB)
1993-09-01
This document contains information presented at the International Energy and Environmental Congress `93 proceedings. Symposiums included demand-side management strategic directions; federal energy management; corporate energy management; and pollution control technologies. Individual reports from the symposiums are processed separately for the data bases.
International Nuclear Information System (INIS)
Porter, V.L.
1993-01-01
Many Mark-I and Mark-II BWR plants are designed with a steel vessel as the primary containment. Typically, the steel containment vessel (SCV) is enclosed within a reinforced concrete shield building with only a small gap (50--90mm) separating the two structures. This paper describes finite element analyses performed to evaluate the effects of contact and friction between a steel containment vessel and an outer contact structure when the containment vessel is subjected to large internal pressures. These computations were motivated by a joint program on containment integrity involving the Nuclear Power Engineering Corporation (NUPEC) of Japan, the US Nuclear Regulatory Commission (NRC), and Sandia National Laboratories for testing model containments
Clean coal technologies: A business report
International Nuclear Information System (INIS)
Anon.
1993-01-01
The book contains four sections as follows: (1) Industry trends: US energy supply and demand; The clean coal industry; Opportunities in clean coal technologies; International market for clean coal technologies; and Clean Coal Technology Program, US Energy Department; (2) Environmental policy: Clean Air Act; Midwestern states' coal policy; European Community policy; and R ampersand D in the United Kingdom; (3) Clean coal technologies: Pre-combustion technologies; Combustion technologies; and Post-combustion technologies; (4) Clean coal companies. Separate abstracts have been prepared for several sections or subsections for inclusion on the data base
On the preference of cold RF technology for the international linear collider
Energy Technology Data Exchange (ETDEWEB)
Gamp, A.
2005-07-01
On August 20th 2004 the International Technology Recommendation Panel (ITRP) released its recommendation that the Linear Collider be based on Superconducting RF Technology. Following a request of the organizers of this conference we summarise in this article the arguments worked out and presented by the ITRP, which led to this recommendation. The main features of both RF-technologies, the favoured L-band RF system of the superconducting version of the Linear Collider and the X-band-technology anticipated for the normal-conducting alternative are briefly described. (orig.)
Energy Technology Data Exchange (ETDEWEB)
Chang, Moon Hee; Kim, H. R.; Kim, H. J. and others
2005-03-15
Korea has participated in the international collaboration programs for the development of future nuclear energy systems driven by the countries holding advanced nuclear technology and Korea and U.S. have cooperated in the INERI. This study aimed mainly at developing the plan for participation in the collaborative development of the Gen IV, searching the participation strategy for INERI and the INPRO, and the international cooperation in these programs. Contents and scope of the study for successful achievement are as follows; Investigation and analysis of international and domestic trends related to advanced nuclear technologies, Development of the plan for collaborative development of the Gen IV and conducting the international cooperation activities, Support for the activities related to I-NERI between Korea and U.S. and conducting the international cooperation, International cooperation activities for the INPRO. This study can be useful for planning the research plan and setting up of the strategy of integrating the results of the international collaboration and the domestic R and D results by combining the Gen IV and the domestic R and D in the field of future nuclear technology. Futhermore, this study can contribute to establishing the effective foundation and broadening the cooperation activities not only with the advanced countries for acquisition of the advanced technologies but also with the developing countries for the export of the domestic nuclear energy systems.
International Nuclear Information System (INIS)
Chang, Moon Hee; Kim, H. R.; Kim, H. J. and others
2005-03-01
Korea has participated in the international collaboration programs for the development of future nuclear energy systems driven by the countries holding advanced nuclear technology and Korea and U.S. have cooperated in the INERI. This study aimed mainly at developing the plan for participation in the collaborative development of the Gen IV, searching the participation strategy for INERI and the INPRO, and the international cooperation in these programs. Contents and scope of the study for successful achievement are as follows; Investigation and analysis of international and domestic trends related to advanced nuclear technologies, Development of the plan for collaborative development of the Gen IV and conducting the international cooperation activities, Support for the activities related to I-NERI between Korea and U.S. and conducting the international cooperation, International cooperation activities for the INPRO. This study can be useful for planning the research plan and setting up of the strategy of integrating the results of the international collaboration and the domestic R and D results by combining the Gen IV and the domestic R and D in the field of future nuclear technology. Futhermore, this study can contribute to establishing the effective foundation and broadening the cooperation activities not only with the advanced countries for acquisition of the advanced technologies but also with the developing countries for the export of the domestic nuclear energy systems
Development of PEM fuel cell technology at international fuel cells
Energy Technology Data Exchange (ETDEWEB)
Wheeler, D.J.
1996-04-01
The PEM technology has not developed to the level of phosphoric acid fuel cells. Several factors have held the technology development back such as high membrane cost, sensitivity of PEM fuel cells to low level of carbon monoxide impurities, the requirement to maintain full humidification of the cell, and the need to pressurize the fuel cell in order to achieve the performance targets. International Fuel Cells has identified a hydrogen fueled PEM fuel cell concept that leverages recent research advances to overcome major economic and technical obstacles.
International Conference on Emerging Technologies for Information Systems, Computing, and Management
Ma, Tinghuai; Emerging Technologies for Information Systems, Computing, and Management
2013-01-01
This book aims to examine innovation in the fields of information technology, software engineering, industrial engineering, management engineering. Topics covered in this publication include; Information System Security, Privacy, Quality Assurance, High-Performance Computing and Information System Management and Integration. The book presents papers from The Second International Conference for Emerging Technologies Information Systems, Computing, and Management (ICM2012) which was held on December 1 to 2, 2012 in Hangzhou, China.
Measures of International Manufacturing and Trade of Clean Energy Technologies
Energy Technology Data Exchange (ETDEWEB)
Engel-Cox, Jill; Sandor, Debbie; Keyser, David; Mann, Margaret
2017-05-25
The technologies that produce clean energy, such as solar photovoltaic panels and lithium ion batteries for electric vehicles, are globally manufactured and traded. As demand and deployment of these technologies grows exponentially, the innovation to reach significant economies of scale and drive down energy production costs becomes less in the technology and more in the manufacturing of the technology. Manufacturing innovations and other manufacturing decisions can reduce costs of labor, materials, equipment, operating costs, and transportation, across all the links in the supply chain. To better understand the manufacturing aspect of the clean energy economy, we have developed key metrics for systematically measuring and benchmarking international manufacturing of clean energy technologies. The metrics are: trade, market size, manufacturing value-added, and manufacturing capacity and production. These metrics were applied to twelve global economies and four representative technologies: wind turbine components, crystalline silicon solar photovoltaic modules, vehicle lithium ion battery cells, and light emitting diode packages for efficient lighting and other consumer products. The results indicated that clean energy technologies are being developed via complex, dynamic, and global supply chains, with individual economies benefiting from different technologies and links in the supply chain, through both domestic manufacturing and global trade.
DEFF Research Database (Denmark)
Turcan, Romeo V.
This study explores the process of de-internationalisation in small high-technology firms. The key research questions are how and why these firms de-internationalise. Being positioned at the intersection of entrepreneurship and international business research paths, the study expressly investigates...... by reduction was employed extensively to advance middle-range theories. The study contributes to (i) international business research by developing a process model of de-internationalisation and defining its constructs; (ii) entrepreneurship research by redefining the entrepreneurial orientation construct...... whether de-internationalisation could be viewed as (i) an entrepreneurial activity; and/or (ii) an integral part of a small high-technology firms’ growth process. Driven by the nature of the research questions, a multiple-case study methodology was adopted for the purpose of theory building. Five firms...
Internal Reflection Sensor for the Cone Penetrometer. Innovative Technology Summary Report
International Nuclear Information System (INIS)
None
2001-01-01
The Internal Reflection Sensor, developed by EIC Laboratories, Inc. as a cone penetrometer based technology, provides real-time detection of subsurface non-aqueous phase liquids (NAPLs). The internal reflection element is positioned against the wall of the cone penetrometer probe such that its sensing face is in contact with the soil or groundwater as the cone is pushed into the subsurface. When NAPL is present and in contact with the sensing face, the internally reflected light is diminished. This results in a decrease in the signal output by the detector - a positive indicator of NAPL presence
HELLER, Daniel Arturo
2005-01-01
This case presents Mazda's over forty-year history developing the rotary engine for use in motor vehicles and explores the role played by international alliances in the implementation of technology strategy. Two key touchstones in the discussion are Mazda's initial technology-licensing agreement with NSU/Wankel and Mazda's longstanding alliance with Ford. The case suggests that strong efforts at internal capability-building may be needed for a firm to maximize the use of alliances in innovati...
International trade, technological change and evolution of work market
International Nuclear Information System (INIS)
Cacciotti, M.
1999-01-01
The report estimates the historic series of wages and employment depending on the average unit value of importation prices in the most important european countries, Italy, France and Germany for the years 1988-1996. Results shows that in the traditional sectors, with unskilled employment are negative influenced by international trade, otherwise, in the technological advanced sectors, influenced are to be considered positive [it
International Nuclear Information System (INIS)
Kljenak, I.
2001-01-01
Experiments on aerosol behavior in a vapor-saturated atmosphere, which were performed in the KAEVER experimental facility and proposed for the OECD International Standard Problem No. 44, were simulated with the CONTAIN thermal-hydraulic computer code. The purpose of the work was to assess the capability of the CONTAIN code to model aerosol condensation and deposition in a containment of a light-water-reactor nuclear power plant at severe accident conditions. Results of dry and wet aerosol concentrations are presented and analyzed.(author)
Characterization and Metrology for ULSI Technology: 1998 International Conference. Proceedings
Energy Technology Data Exchange (ETDEWEB)
Seiler, D.G. [NIST, Gaithersburg, MD 20899 (United States); Diebold, A.C. [SEMATECH, Austin, TX 78741 (United States); Bullis, W.M. [SEMI, Mountain View, CA 94043 (United States); Schaffner, T.J. [Texas Instruments, Dallas, TX 75221 (United States); McDonald, R. [Intel Corp., Santa Clara, CA 95050 (United States); Walters, E.J. [NIST, Gaithersburg, MD 20899 (United States)
1998-11-01
These proceedings represent papers presented at the 1998 International Conference on Characterization and Metrology for ULSI Technology (INIST) in March 1998. The Conference reviewed important semiconductor techniques that are crucial to continued advancements in the semiconductor industry. It brought together leaders, scientists, and engineers concerned with all aspects of the technology and characterization techniques for silicon research. The topics covered included front end processes consisting of modeling, materials, gate dielectrics, doping and wafer issues. Interconnects were discussed in detail including deposition technology. Lithography and patterning was also discussed. Finally, packaging/assembly of the integrated circuits and materials characterization including dopant profiling was discussed. The papers provide an effective portrayal of industry characterization needs and point out some of the problems that must be addressed by industry, academia, and government to continue the dramatic progress in semiconductor technology. There were 141 papers included in these proceedings, out of which 9 have been abstracted for the Energy,Science and Technology database.(AIP)
First International Conference on Applications of Photonic Technology (ICAPT'94)
Chrostowski, Jacek; Measures, Raymond; Applications of Photonic Technology
1995-01-01
In this book we present a snapshot of the state of the art in photonics in 1994, showing typical applications and emerging new ones; discussing the key technologies behind these applications, their limitations, and prospects. The articles in this book are extended versions of the papers presented at the first International Conference on Applications ofPhotonic Technology (ICAPT'94), held in Toronto, Canada, on June 21-23, 1994. Photonics has been recognized as one of the key technologies for the 21 st century, as electronics was the technology of the 20th centrury and electrical engineering changed the life of people in the 19th century. According to the recent report of the Organization for Economic Cooperation and Development in Paris (OECD), the market for photonics will grow dramatically in the next 10 years with an expected world-wide expenditure of US $230 billion from some US $30 billion in 1992. The explosion of information technology was the largest driving force for the deployment of photonic techno...
IAEA and International Science and Technology Center sign cooperative agreement
International Nuclear Information System (INIS)
2008-01-01
Full text: The IAEA and the International Science and Technology Center (ISTC) today signed an agreement that calls for an increase in cooperation between the two organizations. The memorandum of understanding seeks to amplify their collaboration in the research and development of applications and technology that could contribute to the IAEA's activities in the fields of verification and nuclear security, including training and capacity building. IAEA Safeguards Director of Technical Support Nikolay Khlebnikov and ISTC Executive Director Adriaan van der Meer signed the Agreement at IAEA headquarters in Vienna on 22 October 2008. (IAEA)
Energy Technology Data Exchange (ETDEWEB)
NONE
1999-03-01
This volume contains 68 papers presented at the 2nd NUCEF International Symposium NUCEF`98 held on 16-17 November 1998, in Hitachinaka, Japan, following the 1st symposium NUCEF`95 (Proceeding: JAERI-Conf 96-003). The theme of this symposium was `Safety Research and Development of Base Technology on Nuclear Fuel Cycle`. The papers were presented in oral and poster sessions on following research fields: (1) Criticality Safety, (2) Reprocessing and Partitioning, (3) Radioactive Waste Management. The 68 papers are indexed individually. (J.P.N.)
International Nuclear Information System (INIS)
1999-03-01
This volume contains 68 papers presented at the 2nd NUCEF International Symposium NUCEF'98 held on 16-17 November 1998, in Hitachinaka, Japan, following the 1st symposium NUCEF'95 (Proceeding: JAERI-Conf 96-003). The theme of this symposium was 'Safety Research and Development of Base Technology on Nuclear Fuel Cycle'. The papers were presented in oral and poster sessions on following research fields: (1) Criticality Safety, (2) Reprocessing and Partitioning, (3) Radioactive Waste Management. The 68 papers are indexed individually. (J.P.N.)
Update on Monitoring Technologies for International Safeguards and Fissile Material Verification
International Nuclear Information System (INIS)
Croessmann, C. Dennis; Glidewell, Don D.; Mangan, Dennis L.; Smathers, Douglas C.
1999-01-01
Monitoring technologies are playing an increasingly important part in international safeguards and fissile material verification. The developments reduce the time an inspector must spend at a site while assuring continuity of knowledge. Monitoring technologies' continued development has produced new seal systems and integrated video surveillance advances under consideration for Trilateral Initiative use. This paper will present recent developments for monitoring systems at Embalse, Argentina, VNHEF, Sarov, Russian, and Savannah River Site, Aiken, South Carolina
2013 International Conference on Electrical and Information Technologies for Rail Transportation
Liu, Zhigang; Qin, Yong; Zhao, Minghua; Diao, Lijun
2014-01-01
Proceedings of the 2013 International Conference on Electrical and Information Technologies for Rail Transportation (EITRT2013) collects the latest research in this field, including a wealth of state-of-the-art research theories and applications in intelligent computing, information processing, communication technology, automatic control, etc. The objective of the proceedings is to provide a major interdisciplinary forum for researchers, engineers, academics and industrial professionals to present the most innovative research on and developments in the field of rail transportation electrical and information technologies. Contributing authors from academia, industry and the government also offer inside views of new, interdisciplinary solutions.
25 CFR 543.16 - What are the minimum internal controls for information technology?
2010-04-01
... controls for information technology? (a) Physical security measures restricting access to agents, including... longer required. (2) In the event of remote access, the information technology employees must prepare a... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal controls for information...
Transatlantic Innovations: a new approach to international ideas and technology.
Evans, Gregory R D; Blondeel, Phillip; Marchac, Daniel; Kinney, Brian; Cunningham, Bruce; Neuhann-Lorenz, Constance
2010-07-01
In April of this past year, Transatlantic Innovations brought a variety of organizations and industry together for an international exchange of ideas, new technology, and current trends in plastic surgery. The meeting was highly interactive and included audience response devices. The focus was on 10 major areas: (1) new surgical techniques; (2) composite allografts versus conventional techniques, facing the future; (3) interspecialty collaboration versus competition; (4) the business of plastic surgery, best practices; (5) the image of the plastic surgeon, branding yourself; (6) medical tourism; (7) publicity; (8) the regulation of innovation, U.S. Food and Drug Administration and European Medicines Agency perspective; (9) the future of plastic surgery, cutting edge technologies; and (10) applications and controversies in fat grafting. The meeting concluded with the 8th International Committee for Quality Assurance, Medical Technologies and Devices in Plastic Surgery Consensus Conference with the development of a consensus statement. Through an interactive audience response system, additional questions and attitudes were asked of the audience and, in real time, international differences were identified, which led to further discussions from panelists. Responses were identified in three major groups: European Union, North America, and the Rest of the World. Responses and data are included in this article. The meeting brought participants, industry, regulators, and educators from both sides of the Atlantic. The interaction of these groups in these outlined topics brought a unique perspective to the meeting and, in the end, volumes of data. We have more in common than we believe. It is our anticipation that as we as plastic surgeons move forward, we can use these interactions to help our own practices but more specifically the specialty as a whole.
Search Results | Page 82 | IDRC - International Development ...
International Development Research Centre (IDRC) Digital Library (Canada)
Results 811 - 820 of 8523 ... Second Science with Africa Conference : accessing technologies and information contained in patent documents to enhance innovative research in Tanzania. Published date ... Kathmandu urban ecosystem health project a model approach. International ... Measurement issues : day 5. Published ...
Proceedings of the international conference on advances in computer and communication technology
International Nuclear Information System (INIS)
Bakal, J.W.; Kunte, A.S.; Walinjkar, P.B.; Karnani, N.K.
2012-02-01
A nation's development is coupled with advancement and adoption of new technologies. During the past decade advancements in computer and communication technologies have grown multi fold. For the growth of any country it is necessary to keep pace with the latest innovations in technology. International Conference on Advances in Computer and Communication Technology organised by Institution of Electronics and Telecommunication Engineers, Mumbai Centre is an attempt to provide a platform for scientists, engineering students, educators and experts to share their knowledge and discuss the efforts put by them in the field of R and D. The papers relevant to INIS are indexed separately
World Energy Data System (WENDS). Volume VI. International agreement profiles
Energy Technology Data Exchange (ETDEWEB)
None
1979-06-01
The World Energy Data System contains organized data on those countries and international organizations that may have critical impact on world energy. The international agreement profiles in WENDS are all energy-related and are organized by energy technology. These are: coal; conservation; fusion; geothermal; nuclear fission; oil, gas, and shale; solar, wind, and ocean thermal; and other (cooperation in electrical power equipment acquisition, energy, energy research, etc.). The agreement profiles are accessible by energy technology and alphabetically by country.
3. International Symposium 'Vacuum Technology and Equipment'. ISVTE-3
International Nuclear Information System (INIS)
Kogan, V.S.; Shulaev, V.M.
1999-01-01
The reports of the 3th International Symposium 'Vacuum Technology and Equipment', which was held in Kharkov at 22-24 September 1999 are presented. In this issue such subject are published: - structure and properties of thin films and coatings, and their dependencies on deposition and treatment regimes; - uses of vacuum in research and applied fields, investigation and control of vacuum systems parameters, vacuum research
Remote-Reading Safety and Safeguards Surveillance System for 3013 Containers
International Nuclear Information System (INIS)
Lechelt, W. M.; Skorpik, J. R.; Silvers, K. L.; Szempruch, R. W.; Douglas, D. G.; Fein, K. O.
2002-01-01
At Hanford's Plutonium Finishing Plant (PFP), plutonium oxide is being loaded into stainless steel containers for long-term storage on the Hanford Site. These containers consist of two weld-sealed stainless steel cylinders nested one within the other. A third container holds the plutonium within the inner cylinder. This design meets the U.S. Department of Energy (DOE) storage standard, DOE-STD- 3013-2000, which anticipates a 50-year storage lifetime. The 3013 standard also requires a container surveillance program to continuously monitor pressure and to assure safeguards are adequate. However, the configuration of the container system makes using conventional measurement and monitoring methods difficult. To better meet the 3013 monitoring requirements, a team from Fluor Hanford (who manages the PFP), Pacific Northwest National Laboratory (PNNL), and Vista Engineering Technologies, LLC, developed a safer, cost-efficient, remote PFP 3013 container surveillance system. This new surveillance system is a combination of two successfully deployed technologies: (1) a magnetically coupled pressure gauge developed by Vista Engineering and (2) a radio frequency (RF) tagging device developed by PNNL. This system provides continuous, 100% monitoring of critical parameters with the containers in place, as well as inventory controls. The 3013 container surveillance system consists of three main elements: (1) an internal magnetic pressure sensor package, (2) an instrument pod (external electronics package), and (3) a data acquisition storage and display computer. The surveillance system described in this paper has many benefits for PFP and DOE in terms of cost savings and reduced personnel exposure. In addition, continuous safety monitoring (i.e., internal container pressure and temperature) of every container is responsible nuclear material stewardship and fully meets and exceeds DOE's Integrated Surveillance Program requirements
CIEMAT contribution to the international standard problem ISP-34: contain analysis of FAL-ISP 1 test
International Nuclear Information System (INIS)
Herranz, L.E.; Polo, J.
1994-01-01
CIEMAT, along with a great number of international laboratories, has participated in the open exercise of the first International Standard Problem addressing fission product transport issues. The FAL-ISP 1, aimed to study particle agglomeration, has been simulated with CONTAIN code. The thermalhydraulic results obtained have been satisfactory and aerosols ones have been reasonably accurate. However, some discrepancies appeared between predictions and experimental data; these are essentially related to the injection phase of the experiment, where the major influence of input approximations took place. In addition, the rationalization of discrepancies pointed potential data inconsistencies. Some parametric studies showed the results sensitivity to input assumptions concerning aerosol characterization and default values in CONTAIN; in general, they confirmed the suitability of most of the approximations taken. (Author)
Energy Technology Data Exchange (ETDEWEB)
Busch, R
1987-01-01
The study answers the following questions: What is international technological competition. How are the framework requirements, regarding innovation of chosen countries in Europe, Japan and the USA made available. To what extent and with which instruments are the countries under investigation prepared to engage in technological competition. Point of departure was the supposition that the international competitiveness of a country depends increasingly on the innovation capacity of its industries. Technological innovations then become a specific means of competition. It was ascertained that the technical complexity of the systems and products, the cost accumulation and the availability of qualified personnel are amongst the greatest problems of the industry of a country and, at the same time, offer starting points for a state-run research and technology policies. (orig./HSCH).
Technology development for laser-cooled clocks on the International Space Station
Klipstein, W. M.
2003-01-01
The PARCS experiment will use a laser-cooled cesium atomic clock operating in the microgravity environment aboard the International Space Station to provide both advanced tests of gravitational theory to demonstrate a new cold-atom clock technology for space.
4th International Conference on Robot Intelligence Technology and Applications
Karray, Fakhri; Jo, Jun; Sincak, Peter; Myung, Hyun
2017-01-01
This book covers all aspects of robot intelligence from perception at sensor level and reasoning at cognitive level to behavior planning at execution level for each low level segment of the machine. It also presents the technologies for cognitive reasoning, social interaction with humans, behavior generation, ability to cooperate with other robots, ambience awareness, and an artificial genome that can be passed on to other robots. These technologies are to materialize cognitive intelligence, social intelligence, behavioral intelligence, collective intelligence, ambient intelligence and genetic intelligence. The book aims at serving researchers and practitioners with a timely dissemination of the recent progress on robot intelligence technology and its applications, based on a collection of papers presented at the 4th International Conference on Robot Intelligence Technology and Applications (RiTA), held in Bucheon, Korea, December 14 - 16, 2015. For better readability, this edition has the total of 49 article...
3rd International Conference on Robot Intelligence Technology and Applications
Yang, Weimin; Jo, Jun; Sincak, Peter; Myung, Hyun
2015-01-01
This book covers all aspects of robot intelligence from perception at sensor level and reasoning at cognitive level to behavior planning at execution level for each low level segment of the machine. It also presents the technologies for cognitive reasoning, social interaction with humans, behavior generation, ability to cooperate with other robots, ambience awareness, and an artificial genome that can be passed on to other robots. These technologies are to materialize cognitive intelligence, social intelligence, behavioral intelligence, collective intelligence, ambient intelligence and genetic intelligence. The book aims at serving researchers and practitioners with a timely dissemination of the recent progress on robot intelligence technology and its applications, based on a collection of papers presented at the 3rd International Conference on Robot Intelligence Technology and Applications (RiTA), held in Beijing, China, November 6 - 8, 2014. For better readability, this edition has the total 74 papers group...
INTERNATIONAL TECHNOLOGY TRANSFER AND LOCALIZATION: SUCCESS STORIES IN NUCLEAR BRANCH
Directory of Open Access Journals (Sweden)
Yulia V. Chernyakhovskaya
2016-01-01
Full Text Available countries are considering nuclear power industry development [2, p. 3; 3, p. 3; 4]. For newcomer-countries it is of great importance to stimulate the national industry through NPP projects implementation based on technology transfer and localization (TTL. The study and systematization of world experience is useful in purpose to elaborate the national industry development programs. Objectives. The aim of article is to determine success factors of TTL; tasks: 1 to study TTL international experience in the fi eld of nuclear power technologies; 2 on the ground of the world practice to analyze preconditions, contents, stages, arrangement modes, formats and results of TTL. Methods. The following methods are utilized in the study: analysis and synthesis including problem-chronological, cause and eff ect and logical analysis and historical-diachronic method (method of periodization. Results. The following conclusions presented below have been made on the basis of the three cases study related to nuclear industry development using TTL (France, South Korea and China. Conclusions. The TTL success factors includes: Government support that provides long-term governmental development plan of nuclear power and industry for nuclear power based on TTL, and an appropriate international cooperation (under favorable conditions of “NPP buyers market”; Complex approach to implementation of the national TTL program and NPP construction projects: signing of NPP construction contracts with vendors stipulating technology transfer; NPP designing and constructing should be performed jointly with training and transferring of technical documentation and software. Technology transfer cooperation should be implemented through the licenses agreements and setting up joint ventures; Public acceptance and support.
2011-09-23
... Development and Technology Center, a Subsidiary of Navistar International Corporation Truck Division, Fort... International Corporation, Truck Division, Fort Wayne, Indiana (subject firm). The negative determination was... is a headcount reduction across the nation, made possible by the Global Outsourcing. * * * '' The...
1st International Conference on Communities and Technologies
Wenger, Etienne; Wulf, Volker
2003-01-01
The book contains 24 research articles related to the emerging research field of Communities and Technologies (C&T). The papers treat subjects such as online communities, communities of practice, Community support systems, Digital Cities, regional communities and the internet, knowledge sharing and communities, civil communities, communities and education and social capital. As a result of a very quality-oriented review process, the work reflects the best of current research and practice in the field of C&T.
Proceedings of the 17th international conference on structural mechanics in reactor technology
International Nuclear Information System (INIS)
2003-01-01
The conference was divided into the following divisions and subdivisions: DIVISION A: Plenary lectures and panel; DIVISION B: Computational mechanics (Structural and thermal analysis; High-non linear analysis, material behaviour; Vibration and fluid dynamics analysis); DIVISION C: Fuel and core structures (Fuel vibration and fretting; Fuel design and constitutive modelling; Fuel failure under operation and accident conditions; Fuel failure under operation and accident conditions; Components and material behaviour under irradiation; Integrity of fuel systems under transient conditions); DIVISION D: Aging, Life Extension and Licence Renewal (International Regulatory and Economic Perspectives; Utility perspectives, WWER technology; Fatigue, corrosion and crack issues; Component integrity; Aging assessment and monitoring; Containment and other structures); DIVISION F: Design methods and rules for components (International codes and standards; Tube, piping codes and standards; Analyses; Fatigue and life assessment; Creep; Bolted connections and gaskets); DIVISION G: Fracture mechanics (Reactor pressure vessel integrity; Dynamic loading; Fracture considerations for various applications; Failure assessment of Zr alloy; Pipe integrity; Integrity of welds; Failure of non-metallic materials; Leak before break (LBB); Corrosion aspects); DIVISION H: Concrete Containment and Other Structures (Concrete materials and performance; Tests of scale prestressed concrete containment vessel; Shear wall test and analysis; Structural analysis and containment design; Structural integrity and analysis); DIVISION J: Analysis and design for dynamic and extreme load (Vibration of shells and plates; Impact analysis; Piping vibration; Structural dynamics; Experimental and other topics); DIVISION K: Seismic analysis, design and qualification (General seismic issues; Ground motion and sitting; Soil-structure interaction; Seismic response of structures; Seismic re-evaluation; Seismic response and
Internal and external hazards inside the containment in case of an emergency situation
Energy Technology Data Exchange (ETDEWEB)
Abdelhady, Amr [Atomic Energy Authoriy (Egypt). Nuclear Research Center
2017-11-15
The objective of this paper is to estimating radionuclide concentrations in air and radiological dose consequences to indoor workers in a containment of MTR open pool type reactor during emergency situations. A postulated core degradation accident causes fission products to release and the ventilation system will be converted automatically from the normal situation into emergency situation in order to purify the contaminated air by forcing it to pass through a group of filters. The study computes internal and external worker doses from inhalation and submersion in a finite cloud of contaminated air during the emergency mode. A radiological toolbox version 2 was used to evaluate the radiation dose levels inside the containment.
Internal and external hazards inside the containment in case of an emergency situation
International Nuclear Information System (INIS)
Abdelhady, Amr
2017-01-01
The objective of this paper is to estimating radionuclide concentrations in air and radiological dose consequences to indoor workers in a containment of MTR open pool type reactor during emergency situations. A postulated core degradation accident causes fission products to release and the ventilation system will be converted automatically from the normal situation into emergency situation in order to purify the contaminated air by forcing it to pass through a group of filters. The study computes internal and external worker doses from inhalation and submersion in a finite cloud of contaminated air during the emergency mode. A radiological toolbox version 2 was used to evaluate the radiation dose levels inside the containment.
Technology of 3D map creation for 'Ukrytie' object internal premises
International Nuclear Information System (INIS)
Kravchuk, T.A.; Nenakhov, A.N.; Gimel'farb, G.; Mikhalevich, B.
2001-01-01
The results of creation of master cells of information technology for mapping of 'Ukryttia' object internal rooms are represented according to materials of digital stereo and photogrammetric processing of shootings results. It is shown that a highly enough accuracy of mutual orientation of snapshots and recovery of separate objects of 'Ukryttia' object rooms is reached. Mean relative error in defining spatial sizes of objects made up 6%. A principle possibility of using offered technology in practical mapping of 'Ukryttia' object rooms is demonstrated. The results of map creation due to proposed technology can be presented as three-dimensional models in AutoCad system for subsequent use
Directory of Open Access Journals (Sweden)
Lesley A. Judd
2015-07-01
Full Text Available The study, characterization, observation, and quantification of plant root growth and root systems (Rhizometrics has been and remains an important area of research in all disciplines of plant science. In the horticultural industry, a large portion of the crops grown annually are grown in pot culture. Root growth is a critical component in overall plant performance during production in containers, and therefore it is important to understand the factors that influence and/or possible enhance it. Quantifying root growth has varied over the last several decades with each method of quantification changing in its reliability of measurement and variation among the results. Methods such as root drawings, pin boards, rhizotrons, and minirhizotrons initiated the aptitude to measure roots with field crops, and have been expanded to container-grown plants. However, many of the published research methods are monotonous and time-consuming. More recently, computer programs have increased in use as technology advances and measuring characteristics of root growth becomes easier. These programs are instrumental in analyzing various root growth characteristics, from root diameter and length of individual roots to branching angle and topological depth of the root architecture. This review delves into the expanding technologies involved with expertly measuring root growth of plants in containers, and the advantages and disadvantages that remain.
Judd, Lesley A; Jackson, Brian E; Fonteno, William C
2015-07-03
The study, characterization, observation, and quantification of plant root growth and root systems (Rhizometrics) has been and remains an important area of research in all disciplines of plant science. In the horticultural industry, a large portion of the crops grown annually are grown in pot culture. Root growth is a critical component in overall plant performance during production in containers, and therefore it is important to understand the factors that influence and/or possible enhance it. Quantifying root growth has varied over the last several decades with each method of quantification changing in its reliability of measurement and variation among the results. Methods such as root drawings, pin boards, rhizotrons, and minirhizotrons initiated the aptitude to measure roots with field crops, and have been expanded to container-grown plants. However, many of the published research methods are monotonous and time-consuming. More recently, computer programs have increased in use as technology advances and measuring characteristics of root growth becomes easier. These programs are instrumental in analyzing various root growth characteristics, from root diameter and length of individual roots to branching angle and topological depth of the root architecture. This review delves into the expanding technologies involved with expertly measuring root growth of plants in containers, and the advantages and disadvantages that remain.
International Nuclear Information System (INIS)
Porter, V.L.
1994-01-01
Many Mark-I and Mark-II BWR plants are designed with a steel vessel as the primary containment. Typically, the steel containment vessel (SCV) is enclosed within a reinforced concrete shield building with only a small gap (74-90 mm) separating the two structures. This paper describes finite element analyses performed to evaluate the effects of contact and friction between a steel containment vessel and an outer contact structure when the containment vessel is subjected to large internal pressures. These computations were motivated by a joint program on containment integrity involving the Nuclear Power Engineering Corporation (NUPEC) of Japan, the US Nuclear Regulatory Commission (NRC), and Sandia National Laboratories for testing model containments. Under severe accident loading conditions, the steel containment vessel in a typical Mark-I or Mark-II plant may deform under internal pressurization such that it contacts the inner surface of a shield building wall. (Thermal expansion from increasing accident temperatures would also close the gap between the SCV and the shield building, but temperature effects are not considered in these analyses.) The amount and location of contact and the pressure at which it occurs all affect how the combined structure behaves. A preliminary finite element model has been developed to analyze a model of a typical steel containment vessel con-ling into contact with an outer structure. Both the steel containment vessel and the outer contact structure were modelled with axisymmetric shell finite elements. Of particular interest are the influence that the contact structure has on deformation and potential failure modes of the containment vessel. Furthermore, the coefficient of friction between the two structures was varied to study its effects on the behavior of the containment vessel and on the uplift loads transmitted to the contact structure. These analyses show that the material properties of an outer contact structure and the amount
International Nuclear Information System (INIS)
2007-07-01
The important role which the International Atomic Energy Agency (IAEA) plays in assisting Member States in the preservation and enhancement of nuclear knowledge and in facilitating international collaboration in this area has been recognized by the General Conference of the International Atomic Energy Agency in resolutions GC(46)/RES/11B, GC(47)/RES/10B, GC(48)/RES/13 and GC(50)/RES/13. The IAEA continues to support the enhancement and stabilization of nuclear education and training with the objective of securing the availability of qualified human resources for the nuclear sector. Its most important approaches are networking regional educational institutions and fostering cooperation to develop harmonized curricula, prepare and disseminate teaching materials. The Asian Network for Education in Nuclear Technology (ANENT), established by the IAEA in 2004, became operational in 2005. An ANENT website has been set up and is being expanded, such as developing a long-distance learning platform. Also, a reference curriculum for nuclear engineering is being developed with the cooperation of external partners.This booklet summarizes the main activities being carried out by the IAEA with regard to the Asian Network for Education in Nuclear Technology (ANENT) and other related activities including those completed during the period 2002–2005. It briefly describes the background information on the events leading to the formation of the ANENT; the terms of reference formulated at the second Coordination Committee meeting held in Vietnam, October 2005; and objectives, strategy and other institutional and managerial policies reaffirmed by the members. CD-ROM attached to the printed booklet containing nearly all of the background material in full text, including policy level papers, reports, presentations made by Member States, and meeting summaries
New international economic order and flow of science and technology
Energy Technology Data Exchange (ETDEWEB)
Bojko, B
1979-12-01
The role of science and technology in creating a new international economic order based on manpower and raw materials is examined. The traditional linkage of science and politics should end and emphasis be given to increasing productivity in order to expand employment opportunities and raise the world living standard. An indigenous research and development capability is seen as essential to counteract the effects of the time factor when technology is introduced into developing countries. Other considerations are risk of an illusory self-reliance, allocation of development sites in terms of labor substitution, ruthlessness of labor competition during modernization, variations of labor quality, and relationship of demography and unemployment. Competition between the capitalist and socialist countries is being redirected into cooperation in the area of technology transfer. 7 references. (DCK)
van Sinderen, Marten J.; Unknown, [Unknown
2007-01-01
This volume contains the proceedings of the First International Workshop on Architectures, Concepts and Technologies for Service Oriented Computing (ACT4SOC 2007), held on July 22 in Barcelona, Spain, in conjunction with the Second International Conference on Software and Data Technologies (ICSOFT
Ciemat Contribution to The International Standard Problem ISP-34: Contain Analysis of Fal-ISP 1 Test
International Nuclear Information System (INIS)
Herranz, L. E.; Polo, J.
1994-01-01
CIEMAT, along with a great number of international laboratories, has participated in the open exercise of the first International Standard Problem addressing fission product transport issues. The FAL-ISP 1, aimed to study particle agglomeration, has been simulated with CONTAIN code. The therma hydraulic results obtained have been satisfactory and aerosol ones have been reasonably accurate. However, some discrepancies appeared between predictions and experimental data; these are essentially related to the injection phase of the experiment, where the major influence of input approximations took place. In addition, the rationalization of discrepancies pointed potential data inconsistencies. Some parametric studies showed the results sensitivity to input assumptions concerning aerosol characterization and default values in CONTAIN; in general, they confirmed the suitability of most of the approximations taken. (Author) 11 refs
International Nuclear Information System (INIS)
Dechezleprete, A.; Glachant, M.; Meniere, Y.
2010-01-01
Using patent data from 66 countries for the period 1990-2003, we characterize the factors which promote or hinder the international diffusion of climate-friendly technologies on a global scale. Regression results show that technology-specific capabilities of the recipient countries are determinant factors. In contrast, the general level of education is less important. We also show that restrictions to international trade - e.g., high tariff rates - and to a lesser extent lax intellectual property regimes negatively influence the international diffusion of patented knowledge. A counter-intuitive result is that barriers to foreign direct investments can promote transfers. We discuss different possible interpretations. (authors)
An Analysis of Asia-Pacific Educational Technology Research Published Internationally in 2000-2013
Jung, Insung; Yoo, Mina
2014-01-01
The past fourteen years have seen a significant rise in the percentage of Asia-Pacific papers on educational technology (ET) published internationally: from 13.7% in 2000 to 38.4% in 2013. This study seeks to identify the overall trends and gaps in this research. Of the 4,332 articles published in five selected international journals between 2000…
Li-Ying, Jason; Wang, Yuandi
2015-01-01
Innovation policy in China has been promoting “indigenous innovation” by urging Chinese firms to strengthen their internal research and development (R&D) expenditures and to actively acquire external technologies only if they are advanced and necessary. This policy aims to gradually achieve technology excellence and reduce China’s reliance on foreign key technologies. But, it is still unclear how international technology in-licensing by Chinese firms, compared with domestic technology in-...
Relations between information and communication technologies and international migration
Directory of Open Access Journals (Sweden)
Lukić Vesna
2017-01-01
Full Text Available The paper focuses on the topic of the impact of Information and Communication Technologies (ICT on the international migration phenomenon According to the discussed literature, there is an impression that ICTs change the essence of migration and monitoring of migration flows. It also suggests that migration and migrants’ needs shape the development of ICT services intended to them, but they also shape the content of social media. The impact of new technologies on international migration (before migration, during migration and upon arrival in the country of destination has been discussed through an overview of empirical research findings in Serbia and other countries. In this context, the ICT users relevant to the migration process (individuals and interest groups have been more closely determined and discussed, the aspects of the relations between ICTs and migration have been highlighted, as well as their implications for individuals and society. The considered aspects of relations of ICTs and international migration at different stages of the migration process and their severe implications for individuals and society, in our opinion, point to the need for cooperation of users of information and communication technologies relevant to the migration process in different domains ‒ the spheres of influence of ICTs. We believe that is how the potential of ICTs will be exploited in an adequate way, for benefit of both ‒ migrants and other relevant interested parties. While widely accepted by individuals, information and communication technologies have just begun to be recognized as important for migration policy in Serbia and generally, in terms of their opportunities and challenges. In Serbia, only recently (as of the 2011 Census there has been data available on the use of ICTs by certain migrant groups (long-term settled refugees from former Yugoslav republics. Also, the qualitative surveys on the use of ICTs during the migration by transit
Manpower development and international cooperation in Nuclear Technology and Education Center, JAERI
International Nuclear Information System (INIS)
Shiba, Koreyuki; Tojo, Takao; Takada, Kazuo; Nomura, Masayuki
1996-01-01
Nuclear Technology and Education Center was founded in 1958 and now has two branches, Tokyo Education Center at Bunkyo-ku, Tokyo and Tokai Education Center at Tokai, Ibaraki-ken. The objective was to educate and train nuclear engineers and scientists for implementing the nation's program of atomic energy research, development and utilization. A variety of training courses have been prepared and carried out to meet the requirements of the nuclear community. In recent years, activities of getting the public acceptance have become important for nuclear energy deployment in Japan. Many short courses have been implemented at JAERI sites and cities for providing the public including high school teachers with basic knowledge on nuclear energy. International training programs of the center were started with the cooperation of the Japan International Cooperation Agency (JICA) in 1985 and of the International Atomic Energy Agency (IAEA) in 1987. International seminars were implemented for improving nuclear safety by inviting participants from the former Soviet Union, central/east European countries and the neighboring countries of Japan under the direction of the Science and Technology Agency (STA) in 1992. STA and JAERI are starting new programs of helping Asian and Pacific countries to develop nuclear manpower. (author)
Technology and Power Play in the International System: A Study of the 20th and 21st Centuries
Directory of Open Access Journals (Sweden)
Grace Yusuf
2017-12-01
Full Text Available Globalization has led to a profound diffusion of technological innovations among State and Non-state actors. This has a resultant impact on the arrangement of the distribution of power in the International System. History captures continuous transition in the distribution of power between states in the International System; from a multi-polar system during the first and Second World War, to the bipolar system of the cold war and the uni-polar system that emerged in the aftermath of the cold war. The emergence of new actors in the international system and the change in technological nature and application is ushering in a new era of ‘Non-polarity’ in the International System. The aim of this paper is to consider the evolving dynamics of the distribution of power in the International System while considering the roles technology has to play. The paper relays the conceptualization of basic terms, and then applies the ‘Balance of Power theory’ as its theoretical thrust. Finally, it expands on the role of technology in the distribution of power in the International System and what it entails for the future.
5th International Conference on Advancements of Medicine and Health Care through Technology
Roman, Nicolae
2017-01-01
This volume presents the contributions of the fifth International Conference on Advancements of Medicine and Health Care through Technology (Meditech 2016), held in in Cluj-Napoka, Romania. The papers of this Proceedings volume present new developments in - Health Care Technology, - Medical Devices, Measurement and Instrumentation, - Medical Imaging, Image and Signal Processing, - Modeling and Simulation, - Molecular Bioengineering, - Biomechanics.
FCA containment and surveillance (C/S) system
International Nuclear Information System (INIS)
Ogawa, Hironobu; Mukaiyama, Takehiko; Yokota, Yasuhiro.
1994-11-01
The Fast Critical Assembly (FCA) facility of the Japan Atomic Energy Research Inst. (JAERI) is internationally recognized as one of the most sensitive facility in the world from the viewpoint of international safeguards, because the facility possesses a large amount of metallic uranium and metallic plutonium, which are needed to perform various physical experiments. These material are subject to frequent verifications by the inspectorate, the International Atomic Energy Agency (IAEA) and the domestic authority (Science and Technology Agency of Japan, STA). Those verifications require inspectors to access to these materials for measurements and applications of seals. Human resources increase of irradiations and restrictions on the freedom of physical experiments, that are inevitably associated with these inspection activities, have been a serious problem that causes significant burdens for all relating parties. To decrease these burdens without any confliction with the inspection goals, an advanced comprehensive system of containment and surveillance has been developed. The FCA Containment and Surveillance (C/S) System consists of tow independent subsystems, i. e. Portal Monitor (P/M) and Penetration Monitor(PN/M). In this system the internal wall of the reactor building is used as a part of containment for the safeguards purpose, which enables the portal, that is installed at the internal wall of the reactor building, to be used as an area for monitoring of any removal of nuclear material. A metal detector of high sensitivity has been selected for the system since all nuclear materials possessed by the FCA has metallic forms. The internal wall has several penetrations for utility purposes, which should also be monitored for the purpose of detecting any removal of nuclear material from the reactor core area. A penetration monitor system has been developed for this purpose. This report describes functions of the system and their operation procedures. (author)
International technology transfer to support the environmental restoration needs of the DOE complex
International Nuclear Information System (INIS)
DuCharme, A.R.; Jimenez, R.D.; Roberds, W.J.
1992-01-01
One of the principal objectives of the International Technology Exchange Program (ITEP) is the exchange of waste management and environmental restoration (WM/ER) technologies between the US and other nations. The current emphasis of ITEP is the transfer of technologies to the US that could provide better, faster, cheaper, or safer solutions to the needs of the DOE complex. The 10 candidate technologies that have been identified thus far by ITEP are discussed. The highlights of preliminary evaluations of these technologies through a systems approach are also described. The technologies have been evaluated by a screening process to determine their applicability to the leading WM/ER needs of the DOE complex. The technologies have been qualitatively compared with the known or anticipated capabilities of domestic, base case technologies
Current Abstracts Nuclear Reactors and Technology
Energy Technology Data Exchange (ETDEWEB)
Bales, J.D.; Hicks, S.C. [eds.
1993-01-01
This publication Nuclear Reactors and Technology (NRT) announces on a monthly basis the current worldwide information available from the open literature on nuclear reactors and technology, including all aspects of power reactors, components and accessories, fuel elements, control systems, and materials. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency`s Energy Technology Data Exchange or government-to-government agreements. The digests in NRT and other citations to information on nuclear reactors back to 1948 are available for online searching and retrieval on the Energy Science and Technology Database and Nuclear Science Abstracts (NSA) database. Current information, added daily to the Energy Science and Technology Database, is available to DOE and its contractors through the DOE Integrated Technical Information System. Customized profiles can be developed to provide current information to meet each user`s needs.
Directory of Open Access Journals (Sweden)
B. M. Khroustalev
2016-01-01
Full Text Available The paper considers modern approaches to usage of hydrocarbon-containing waste as energy resources and presents description of investigations, statistic materials, analysis results on formation of hydrocarbon-containing waste in the Republic of Belarus. Main problems pertaining to usage of waste as a fuel and technologies for their application have been given in the paper. The paper describes main results of the investigations and a method for efficient application of viscous hydrocarbon-containing waste as an energy-packed component and a binding material while producing a solid fuel. A technological scheme, a prototype industrial unit which are necessary to realize a method for obtaining multi-component solid fuel are represented in the paper. A paper also provides a model of technological process with efficient sequence of technological operations and parameters of optimum component composition. Main factors exerting significant structure-formation influence in creation of structural composition of multi-component solid fuel have been presented in the paper. The paper gives a graphical representation of the principle for selection of mixture particles of various coarseness to form a solid fuel while using a briquetting method and comprising viscous hydrocarbon-containing waste. A dependence of dimensionless concentration g of emissions into atmosphere during burning of two-component solid fuel has been described in the paper. The paper analyzes an influence of the developed methodology for emission calculation of multi-component solid fuels and reveals a possibility to optimize the component composition in accordance with ecological function and individual peculiar features of fuel-burning equipment. Special features concerning storage and transportation, advantages and disadvantages, comparative characteristics, practical applicability of the developed multi-component solid fuel have been considered and presented in the paper. The paper
Information and Communication Technologies in International Education: A Canadian Policy Analysis
Aucoin, Robert C.
2011-01-01
The rhetoric surrounding the use of information and communication technologies (ICTs) in international education speaks of providing education access for all. However, an examination of actual policies reveals an emphasis not on creating an educated population, but on improving economic opportunities using discourses such as globalization,…
Final Report Inspection of Aged/Degraded Containments Program.
Energy Technology Data Exchange (ETDEWEB)
Naus, Dan J [ORNL; Ellingwood, B R [Georgia Institute of Technology; Oland, C Barry [ORNL
2005-09-01
The Inspection of Aged/Degraded Containments Program had primary objectives of (1) understanding the significant factors relating corrosion occurrence, efficacy of inspection, and structural capacity reduction of steel containments and liners of reinforced concrete containments; (2) providing the United States Nuclear Regulatory Commission (USNRC) reviewers a means of establishing current structural capacity margins or estimating future residual structural capacity margins for steel containments, and concrete containments as limited by liner integrity; (3) providing recommendations, as appropriate, on information to be requested of licensees for guidance that could be utilized by USNRC reviewers in assessing the seriousness of reported incidences of containment degradation; and (4) providing technical assistance to the USNRC (as requested) related to concrete technology. Primary program accomplishments have included development of a degradation assessment methodology; reviews of techniques and methods for inspection and repair of containment metallic pressure boundaries; evaluation of high-frequency acoustic imaging, magnetostrictive sensor, electromagnetic acoustic transducer, and multimode guided plate wave technologies for inspection of inaccessible regions of containment metallic pressure boundaries; development of a continuum damage mechanics-based approach for structural deterioration; establishment of a methodology for reliability-based condition assessments of steel containments and liners; and fragility assessments of steel containments with localized corrosion. In addition, data and information assembled under this program has been transferred to the technical community through review meetings and briefings, national and international conference participation, technical committee involvement, and publications of reports and journal articles. Appendix A provides a listing of program reports, papers, and publications; and Appendix B contains a listing of
International Conference on Physics and Technology of Reactors and Applications
International Nuclear Information System (INIS)
2011-01-01
Full text : The international conference on physics and technology of reactors is organized by the Moroccan Association for Nuclear enggineering and Reactor Technology (GMTR) with the collaboration of the Centre for Energy and Nuclear Sciences and Techniques (CNESTEN) and under the auspices of the ministry of Energy, Mining, Water and Environment. The programme of the PHYTRA2 conference covers a wide variety of topics. The conference is organised in one plenary session, eight oral technical sessions and one poster session. The oral and poster technical sessions covers the usual topics of nuclear engineering including one session on research reactors utilisation and computational methods for research reactors
Bruce, Kerry
2013-01-01
Background: Mobile phones and other technologies are widely used in health programming in developing countries, many introduced by international nongovernmental organizations (INGOs) to accelerate data collection. This research examined: How are INGOs adopting the innovation of mobile technology into M&E systems for health care programs in…
On-line internal corrosion monitoring and data management for remote pipelines: a technology update
Energy Technology Data Exchange (ETDEWEB)
Wold, Kjell; Stoen, Roar; Jenssen, Hallgeir [Roxar Flow Measurement AS, Stavanger (Norway); Carvalho, Anna Maria [Roxar do Brasil Ltda., Rio de Janeiro, RJ (Brazil)
2009-07-01
Internal corrosion monitoring of remote pipelines can be costly and demanding on resources. Online and non-intrusive monitoring directly on the pipe wall can improve the quality of measurements, make installation more convenient and allow more efficient communication of data. The purpose of this paper is to describe a non-intrusive technology, and show examples on field installations of the system. Furthermore, the non-intrusive technology data can be stored, interpreted and combined with conventional (intrusive) system information, in order to get a full picture of internal corrosion profile, corrosion rate and trends regarding the pipeline being monitored. (author)
First International Symposium on Applied Computing and Information Technology (ACIT 2013)
Applied Computing and Information Technology
2014-01-01
This book presents the selected results of the 1st International Symposium on Applied Computers and Information Technology (ACIT 2013) held on August 31 – September 4, 2013 in Matsue City, Japan, which brought together researchers, scientists, engineers, industry practitioners, and students to discuss all aspects of Applied Computers & Information Technology, and its practical challenges. This book includes the best 12 papers presented at the conference, which were chosen based on review scores submitted by members of the program committee and underwent further rigorous rounds of review.
Remote container monitoring and surveillance systems
International Nuclear Information System (INIS)
Resnik, W.M.; Kadner, S.P.
1995-01-01
Aquila Technologies Group is developing a monitoring and surveillance system to monitor containers of nuclear materials. The system will both visually and physically monitor the containers. The system is based on the combination of Aquila's Gemini All-Digital Surveillance System and on Aquila's AssetLAN trademark asset tracking technology. This paper discusses the Gemini Digital Surveillance system as well as AssetLAN technology. The Gemini architecture with emphasis on anti-tamper security features is also described. The importance of all-digital surveillance versus other surveillance methods is also discussed. AssetLAN trademark technology is described, emphasizing the ability to continually track containers (as assets) by location utilizing touch memory technology. Touch memory technology provides unique container identification, as well as the ability to store and retrieve digital information on the container. This information may relate to container maintenance, inspection schedules, and other information. Finally, this paper describes the combination of the Gemini system with AssetLAN technology, yielding a self contained, container monitoring and area/container surveillance system. Secure container fixture design considerations are discussed. Basic surveillance review functions are also discussed
International Nuclear Information System (INIS)
Choi, Young Myung; Han, Pil Soon; Park, Yun Sik; Song, Ki Dong; Yang, Mang Ho; Oh, Keun Bae; Jang, Hong Lae; Lee, Dong Jin; Lee, Kang Suk; Kim, Sung Ki; Ko, Han Suk
1993-12-01
This study deals with international nuclear cooperation and technology self-reliance for nuclear development in other countries. This study also analyses the international and domestic nuclear environment such as NPT, nuclear export control, gloval environmental issues, and public acceptance. Finally, a suggestion is made for the future direction of strategy for nuclear technology self-reliance in Korea. (Author)
Kumar, Amit; Sankar, V; Rao, N; Sarma, T
2017-01-01
This book includes the original, peer-reviewed research from the 2nd International Conference on Emerging Trends in Electrical, Communication and Information Technologies (ICECIT 2015), held in December, 2015 at Srinivasa Ramanujan Institute of Technology, Ananthapuramu, Andhra Pradesh, India. It covers the latest research trends or developments in areas of Electrical Engineering, Electronic and Communication Engineering, and Computer Science and Information.
International Nuclear Information System (INIS)
Bouazza, A.; Parker, R.J.
1997-01-01
In discussing containment technologies in Australia it is important to understand the factors which influence environmental control of wastes. Although Australia is considered to be an and country, there is only limited reliance on use of groundwater for domestic purposes and this is mainly in rural areas. In many areas, the groundwater is brackish to saline, thus limiting the use of the water. The limited use of groundwater for domestic purposes and the sparse population of Australia combine to produce an environmental regulatory framework very different to North America and Europe. Up until very recently, the approach to disposal of industrial, mining and domestic waste has been based on the principle of open-quotes dilute and disperseclose quotes. However, this attitude has changed, new regulations have been put forward imposing much greater control over the disposal of all forms of waste. This paper provides an overview of the containment technology in Australia as used in certain states with a discussion on the regulatory aspect. It presents examples of some of the innovative techniques that can be considered in the limited Australian regulatory environment
International Nuclear Information System (INIS)
2016-01-01
IV International scientific and technical conference “Innovative designs and technologies of nuclear power” has been organized and is conducted by JSC NIKIET with support from Rosatom State Corporation, the International Atomic Energy Agency, the Russian Academy of Sciences and the Nuclear Society of Russia. The conference topics include: innovative designs of nuclear facilities for various applications, nuclear fuel and new materials, closed fuel cycle technologies, SNF and RW management, technological answers to nonproliferation problems, small power reactors (stationary, transportable, floatable, propulsion, space), integrated codes of a new generation for safety analysis of nuclear power plants and fuel cycles, controlled fusion [ru
Laferriere, Therese; Resta, Paul; Davis, Niki; McLaughlin, Robert; Orey, Michael; Shakwa, Geoffrey; Malone, Todd; Wilder, Hilary; Gibson, Ian; Beisser, Sally; FitzGibbon, Ann; Brennan Freeman, Eileen; Castro-Filho, Jose Aires; Voogt, Joke; Knezek, Gerald; Hargrave, Connie; Carlsen, Roger; McFerrin, Karen; Price, Jerry; Weber, Roberta; Willis, Dee Anna
2007-01-01
The maturing research and development foci of SITE's International Committee have an ethical dimension. Comparative research and international collaboration are a healthy way, facilitated by communication technologies, to increase diversity within teacher education as well as to increase the quality
Laferriere, Therese; Resta, Paul; Davis, Niki; McLaughlin, Robert; Orey, Michael; Shakwa, Geoffrey; Malone, Todd; Wilder, Hilary; Gibson, Ian; Beisser, Sally; FitzGibbon, Ann; Brennan Freeman, Eileen; Castro-Filho, Jose Aires; Voogt, Joke; Knezek, Gerald; Hargrave, Connie; Carlsen, Roger; McFerrin, Karen; Price, Jerry; Weber, Roberta; Willis, Dee Anna
2007-01-01
The maturing research and development foci of SITE's International Committee have an ethical dimension. Comparative research and international collaboration are a healthy way, facilitated by communication technologies, to increase diversity within teacher education as well as to increase the quality
Technological learning through international collaboration: Lessons from the field
Wood, Danielle; Weigel, Annalisa
2013-02-01
Countries on every continent are making new or renewed commitments to domestic satellite programs. These programs have the potential to address national needs by enhancing access to information, improving infrastructure and providing inspiration to the public. How do countries without local expertise in space technology begin a new satellite program? What is the role of international collaboration in supporting the efforts of a new space fairing country? This paper explores such questions by highlighting outputs from intensive field work in Africa and Asia. Specifically, the study explores case studies of early space activity in these countries to search for lessons about the management of a young space program. The observations from field work are compared to ideas from scholarly literature on technological learning. The findings are organized using principles from systems architecture. The paper presents a model that captures many of the influences and strategic decision areas for a collaborative satellite development project. The paper also highlights the growth of capability among African countries in the area of satellite technology.
12th International Conference on Intelligent Information Hiding and Multimedia Signal Processing
Tsai, Pei-Wei; Huang, Hsiang-Cheh
2017-01-01
This volume of Smart Innovation, Systems and Technologies contains accepted papers presented in IIH-MSP-2016, the 12th International Conference on Intelligent Information Hiding and Multimedia Signal Processing. The conference this year was technically co-sponsored by Tainan Chapter of IEEE Signal Processing Society, Fujian University of Technology, Chaoyang University of Technology, Taiwan Association for Web Intelligence Consortium, Fujian Provincial Key Laboratory of Big Data Mining and Applications (Fujian University of Technology), and Harbin Institute of Technology Shenzhen Graduate School. IIH-MSP 2016 is held in 21-23, November, 2016 in Kaohsiung, Taiwan. The conference is an international forum for the researchers and professionals in all areas of information hiding and multimedia signal processing. .
Improved HEPA Filter Technology for Flexible and Rigid Containment Barriers
International Nuclear Information System (INIS)
Pinson, Paul Arthur
1998-01-01
Safety and reliability in glovebox operations can be significantly improved and waste packaging efficiencies can be increased by inserting flexible, lightweight, high capacity HEPA filters into the walls of plastic sheet barriers. This HEPA filter/barrier technology can be adapted to a wide variety of applications: disposable waste bags, protective environmental barriers for electronic equipment, single or multiple use glovebag assemblies, flexible glovebox wall elements, and room partitions. These reliable and inexpensive filtered barriers have many uses in fields such as radioactive waste processing, HVAC filter changeout, vapor or grit blasting, asbestos cleanup, pharmaceutical, medical, biological, and electronic equipment containment. The applications can result in significant cost savings, improved operational reliability and safety, and total waste volume reduction. This technology was developed at the Argonne National Laboratory-West (ANL-W) in 1993 and has been used at ANL-W since then at the TRU Waste Characterization Chamber Gloveboxes. Another 1998 AGS Conference paper titled ''TRU Waste Characterization Gloveboxes'', presented by Mr. David Duncan of ANL-W, describes these boxes
1st International Conference on Robot Intelligence Technology and Applications
Matson, Eric; Myung, Hyun; Xu, Peter
2013-01-01
In recent years, robots have been built based on cognitive architecture which has been developed to model human cognitive ability. The cognitive architecture can be a basis for intelligence technology to generate robot intelligence. In this edited book the robot intelligence is classified into six categories: cognitive intelligence, social intelligence, behavioral intelligence, ambient intelligence, collective intelligence and genetic intelligence. This classification categorizes the intelligence of robots based on the different aspects of awareness and the ability to act deliberately as a result of such awareness. This book aims at serving researchers and practitioners with a timely dissemination of the recent progress on robot intelligence technology and its applications, based on a collection of papers presented at the 1st International Conference on Robot Intelligence Technology and Applications (RiTA), held in Gwangju, Korea, December 16-18, 2012. For a better readability, this edition has the total 101 ...
2nd International Conference on Photonics, Optics and Laser Technology
Raposo, Maria
2016-01-01
This collection of the selected papers presented to the Second International Conference on Photonics, Optics and laser technology PHOTOPTICS 2014 covers the three main conference scientific areas of “Optics”, “Photonics” and “Lasers”. The selected papers, in two classes full and short, result from a double blind review carried out by conference Program Committee members who are highly qualified experts in the conference topic areas.
Summary of the fifth International Symposium on Fusion Nuclear Technology (ISFNT-5)
International Nuclear Information System (INIS)
Vetter, J.E.
1999-01-01
The fifth International Symposium on Fusion Nucler Technology was held in Rome on 19-24 September 1999. It was attended by about 350 participants from 17 countries. The main emphasis during this conference was given to developments in connection with ITER
International Nuclear Information System (INIS)
1997-09-01
This document includes extended synopses of 54 presentations given at the International Symposium on Radiation Technology for the conservation of the Environment held in Zakopane near Cracow), Poland, 8-12 September 1997. Each presentation is separately indexed. Refs, figs, tabs
International Nuclear Technology Forum: Future prospects of nuclear power plants and Turkey
International Nuclear Information System (INIS)
1994-01-01
The document includes 19 papers presented at the 'International Nuclear Technology Forum: Future Prospects of Nuclear Power Plants in Turkey', held between 12-15 October 1993 in Ankara (Turkey). A separate abstract was prepared for each paper prepared for each paper
Energy Technology Data Exchange (ETDEWEB)
NONE
1997-09-01
This document includes extended synopses of 54 presentations given at the International Symposium on Radiation Technology for the conservation of the Environment held in Zakopane (near Cracow), Poland, 8-12 September 1997. Each presentation is separately indexed. Refs, figs, tabs.
Safety in nuclear technology through introduction of internationally binding agreements
International Nuclear Information System (INIS)
1987-01-01
Presents the Verband Deutscher Elektrotechniker (VDE) views in favour of continued utilisation of nuclear energy for electrical power generation. Nuclear energy helps to conserve finite natural resources of coal, oil, and gas for future generations, and avoids the considerable amount of environmental pollution produced by coal-burning power stations. Risks arise in every technology, but these must be considered in relation to the utility of the technology. Development of other forms of energy conversion must continue, but use of nuclear energy at the present time cannot be avoided without incurring great adverse economic and environmental pollution consequences. Safety aspects must be the object of committed and continuous research, and must be internationally agreed. (H.V.H.)
The International Year of Light and Light-based Technologies
Pendrill, Ann-Marie
2015-05-01
I report on the opening ceremony of the International Year of Light and Light-based Technologies 2015 (IYL2015), which took place at the UNESCO headquarters in Paris, France, on 19-20 January 2015. Over the two days, more than 1000 participants from all over the world learned more about the fundamental properties of light and advanced photonics applications, the history of optics and its applications through the centuries, light poverty and light pollution, and light for everyday life, health and research.
Proceedings of the sixth IEA international workshop on beryllium technology for fusion
Energy Technology Data Exchange (ETDEWEB)
Kawamura, Hiroshi [Japan Atomic Energy Research Inst., Kashiwa, Chiba (Japan); Tanaka, Satoru [Tokyo Univ., Tokyo (Japan); Ishitsuka, Etsuo [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment
2004-03-01
This report is the Proceedings of the Sixth International Energy Agency International Workshop on Beryllium Technology for Fusion. The workshop was held on December 2-5, 2003, at SEAGAIA in Miyazaki City, Japan with 69 participants who attended from Europe, the Russian Federation, Kazakhstan, Ukraine, China, the United States and Japan. The topics for papers were arranged into nine sessions; Status of beryllium study, Plasma and tritium interactions, ITER oriented issues, Neutron irradiation effects, Beryllide application, Disposal and recycling, Molten salt, Health and safety issues and Panel discussion. In the Panel discussion, the international collaboration for three topics, i.e., Neutron irradiation effects, Beryllide application, Recycling and Disposal, were discussed, and necessary items for the international collaboration were proposed. The 46 of the presented papers are indexed individually. (J.P.N.)
Nuclear Reactors and Technology; (USA)
Energy Technology Data Exchange (ETDEWEB)
Cason, D.L.; Hicks, S.C. (eds.)
1991-01-01
Nuclear Reactors and Technology (NRT) announces on a monthly basis the current worldwide information available from the open literature on nuclear reactors and technology, including all aspects of power reactors, components and accessories, fuel elements, control systems, and materials. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database (EDB) during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency's Energy Technology Data Exchange or government-to-government agreements. The digests in NRT and other citations to information on nuclear reactors back to 1948 are available for online searching and retrieval on EDB and Nuclear Science Abstracts (NSA) database. Current information, added daily to EDB, is available to DOE and its contractors through the DOE integrated Technical Information System. Customized profiles can be developed to provide current information to meet each user's needs.
Institute of Scientific and Technical Information of China (English)
无
2008-01-01
@@ In October one of SINOPEC's ten core projects to be tackled- "Development of package technology for the 140kt/a caprolactam unit" had passed the technical appraisal organized by the SINOPEC Group.This package technology integrates new techniques relating to the production of cyclohexanone via oxidation of ethylene oxide,the production of cyclohexanone-oxime through ammoximation of cyclohexanone,the triple rearrangement of cyclohexanoneoxime,and the purification ofcaprolactam.The overall package technology has reached the internationally advanced level with independent intellectual property rights,and has filed or has been granted a lot of Chinese and overseas patents.This package technology has been successfully adopted in commercial scale at the Baling Petrochemical Company.
Third international conference on CANDU fuel
International Nuclear Information System (INIS)
Boczar, Peter
1992-01-01
These proceedings contain full texts of all 49 papers from the ten sessions and the banquet address. The sessions were on the following subjects: International experience and programs; Fuel behaviour and operating experience; Fuel modelling; Fuel design; Advanced fuel and fuel cycle technology; AECL's concept for the disposal of nuclear fuel waste. The individual papers have been abstracted separately
Treatment of simulated plutonium-containing wastewater by ultrafiltration-reverse osmosis technology
International Nuclear Information System (INIS)
Xiong Zhonghua; Fan Xianhua; Luo Deli; Wang Tuo; Chen Qi
2008-01-01
Ultrafiltration and reverse osmosis were employed for the treatment of low level radioactive water containing plutonium. The system consists of ultrafiltration module with hollow fibre membrane and reverse osmosis module with spiral membrane. The decontamination efficiency and volume concentration ratio affected by technical parameters were explored in the experiment. The results show that the decontamination efficiency achieves 99.94% and the volume concentration ratio achieves 12.5 at pH=10 for solution fed into the membrane separation system. This technology will be applied in radioactive waste minimization as a new treatment method. (authors)
Energy Technology Data Exchange (ETDEWEB)
NONE
2004-04-01
This is the 1st revision of the INIS/ETDE Joint Thesaurus. It contains 20 953 valid descriptors and 8 600 forbidden terms. It was last updated in December 2003. The Joint Thesaurus contains the controlled terminology for indexing all information within the subject scope of both INIS (International Nuclear Information System) and ETDE (Energy Technology Data Exchange) information systems. The terminology is intended for use in subject description for input or retrieval of information in those systems. The thesaurus is a terminological control device used in translating from the natural language of documents, indexers or users into a more constrained system language It is also a controlled and dynamic vocabulary of semantically and generically related terms which covers a specific domain of knowledge. The domain of knowledge covered by this Thesaurus includes physics (in particular, plasma physics, atomic and molecular physics, and especially nuclear and high-energy physics), chemistry, materials, earth sciences, radiation biology, radioisotope effects and kinetics, applied life sciences, radiology and nuclear medicine, isotope and radiation source technology, radiation protection, radiation applications, engineering, instrumentation, fossil fuels, synthetic fuels, renewable energy sources, advanced energy systems, fission and fusion reactor technology, safeguards and inspection, waste management, environmental aspects of the production and consumption of energy from nuclear and non-nuclear sources, energy efficiency and energy conservation, economics and sociology of energy production and use, energy policy, and nuclear law. The terms in the Thesaurus are listed alphabetically, and with each alphabetic entry a word block containing the terms associated with the particular entry is displayed. In the word block, terms that have a hierarchical relationship to the entry are identified by the symbols BT and NT, for Broader Term and Narrower Term. Those with an affinitive
Optical memory system technology. Citations from the International Aerospace Abstracts data base
Zollars, G. F.
1980-01-01
Approximately 213 citations from the international literature which concern the development of the optical data storage system technology are presented. Topics covered include holographic computer storage devices, crystal, magneto, and electro-optics, imaging techniques, in addition to optical data processing and storage.
DEFF Research Database (Denmark)
Jacobsen, Lina; Grunert, Klaus G; Søndergaard, Helle Alsted
2014-01-01
In order to increase the new product development (NPD) success for novel food products, it is crucial to understand how information can be optimally disseminated within companies. This systematic literature review concentrates on factors influencing internal communication between market......, and knowledge management, food companies can enhance internal communication between market and technology functions during the NPD process....
Erdol, R.; Erdogan, F.
1976-01-01
The elastostatic axisymmetric problem for a long thick-walled cylinder containing a ring-shaped internal or edge crack is considered. Using the standard transform technique the problem is formulated in terms of an integral equation which has a simple Cauchy kernel for the internal crack and a generalized Cauchy kernel for the edge crack as the dominant part. As examples the uniform axial load and the steady-state thermal stress problems have been solved and the related stress intensity factors have been calculated. Among other findings the results show that in the cylinder under uniform axial stress containing an internal crack the stress intensity factor at the inner tip is always greater than that at the outer tip for equal net ligament thicknesses and in the cylinder with an edge crack which is under a state of thermal stress the stress intensity factor is a decreasing function of the crack depth, tending to zero as the crack depth approaches the wall thickness.
2nd International Symposium on Intelligent Systems Technologies and Applications
Mitra, Sushmita; Thampi, Sabu; El-Alfy, El-Sayed
2016-01-01
This book constitutes the thoroughly refereed proceedings of the second International Symposium on Intelligent Systems Technologies and Applications (ISTA’16), held on September 21–24, 2016 in Jaipur, India. The 80 revised papers presented were carefully reviewed and selected from 210 initial submissions and are organized in topical sections on image processing and artificial vision, computer networks and distributed systems, intelligent tools and techniques and applications using intelligent techniques.
3rd International Conference on Photonics, Optics and Laser Technology
Raposo, Maria
2016-01-01
The book provides a collection of selected papers presented to the third International Conference on Photonics, Optics and Laser Technology PHOTOPTICS 2015, covering the three main conference scientific areas of “Optics”, “Photonics” and “Lasers”. The selected papers, in two classes full and short, result from a double blind review carried out by the conference program committee members which are highly qualified experts in conference topic areas.
International Nuclear Information System (INIS)
Sato, Takashi; Hamada, Akiyoshi; Kitamura, Kazuhiro
1998-01-01
Clean energy is more and more required worldwide in proportion to actualization of global environmental issues including global warming. Therefore, it is an urgent task to realize promotion of worldwide introduction of clean energy which exists abundantly and is widely distributed in the world, such as hydropower and solar energy, while reducing the dependence on fossil fuel. However, since the renewable energy, differing from so called fossil fuel, is impossible to transport for long distance and store as it is, its utilization is subject to be limited. As one possible resolution of this kind of issues, 'International clean energy network using hydrogen conversion technology' which enables conversion of renewable energy from low cost hydropower into hydrogen energy and also into the transportable and storable form, is a meaningful concept. This system technology enables dealing of this hydrogen energy in international market as in the same manner as fossil fuel. It is considered to enable promotion of international and large scale introduction of such clean energy, along with the contribution to diversified and stabilized international energy supply. In this study, based upon the above-mentioned point of view and assumption of two sites, one on supply side and another on demand side of hydrogen energy, three systems are presumed. One of the systems consists of liquid hydrogen as transportation and storage medium of hydrogen, and the others intermediately convert hydrogen into methanol or ammonia as an energy carrier. A overall conceptual design of each system spanning from hydrogen production to its utilization, is conducted in practical way in order to review the general technical aspects and economical aspects through cost analysis. This study is administrated through the New Energy and Industrial Technology Development Organization (NEDO) as a part of the International Clean Energy Network Using Hydrogen Conversion (so-called WE-NET) Program with funding from
4th international conference in sustainability in energy and buildings
Höjer, Mattias; Howlett, Robert; Jain, Lakhmi
2013-01-01
This volume contains the proceedings of the Fourth International Conference on Sustainability in Energy and Buildings, SEB12, held in Stockholm, Sweden, and is organised by KTH Royal Institute of Technology, Stockholm, Sweden in partnership with KES International. The International Conference on Sustainability in Energy and Buildings focuses on a broad range of topics relating to sustainability in buildings but also encompassing energy sustainability more widely. Following the success of earlier events in the series, the 2012 conference includes the themes Sustainability, Energy, and Buildings and Information and Communication Technology, ICT. The SEB’12 proceedings includes invited participation and paper submissions across a broad range of renewable energy and sustainability-related topics relevant to the main theme of Sustainability in Energy and Buildings. Applicable areas include technology for renewable energy and sustainability in the built environment, optimisation and modeling techniques, informati...
Farshid Mohamadnejad
2014-01-01
Technology acquisition plays a key role in the management of technology in industrial organizations. While there are ample theoretical and empirical researches on firm technology acquisition which are focused on the study of its dependence on other components of organization, the literature pays less attention to explore and analyze the inter-relatedness found in the main body of technology acquisition itself. Internal and external technology acquisitions are among the main substitute modes w...
Experiences and Challenges of International Students in Technology-Rich Learning Environments
Habib, Laurence; Johannesen, Monica; Øgrim, Leikny
2014-01-01
This article presents a study of international students and their use of technology in a Scandinavian institution of Higher Education. A special emphasis is placed on patterns of use of a virtual learning environment (VLE) that is available to all the study programmes at the institution. Actor-Network Theory (ANT) is used as a theoretical approach…
Guo, Shesen; Zhang, Ganzhou; Guo, Yufei
2016-01-01
The definition of the field of educational technology has evolved over 50 years. New inventions and economic globalization increasingly facilitate people's communication for exchange of ideas and collaboration. This work attempts to describe international research collaboration in educational technology for the past 50 years. This article intends…
International co-operation and the transfer of nuclear technology
International Nuclear Information System (INIS)
di Primio, J.C.
1977-01-01
The transfer of technology from developed countries is usually done through industrial enterprises. The local industrialization of imported technology does not necessarily imply that full benefit is extracted from its application. A pre-established scientific and technical infrastructure is needed to understand and incorporate it, and to develop methods for improvement and use at the industrial level, in the frame of national conditions. The transference of nuclear technology has recently shown new concepts for implementation. It is becoming a rule that massive industrial nuclear technology transfer to developing nations is tied to a requirement for simultaneous assistance in creating or promoting the infrastructure. An example of international co-operation to meet this requirement is the Argentine-German Agreement for the Peaceful Applications of Nuclear Energy. Since 1971 this has been used to strengthen the scientific and technical programmes of the Argentine Atomic Energy Commission in the relevant fields of industrial applications. The objectives and implementation of the agreement are described: co-operative actions were initially directed to the infrastructure needed to support the nuclear fuel cycle industry. The results achieved during the period 1971-1976 are critically analysed. This analysis has influenced the selection of future co-operative projects as well as the extension of the co-operation to other nuclear fields of common interest. (author)
2nd International Colloquium on Sports Science, Exercise, Engineering and Technology 2015
Sulaiman, Norasrudin; Adnan, Rahmat
2016-01-01
The proceeding is a collection of research papers presented at the 2nd International Colloquium on Sports Science, Exercise, Engineering and Technology (ICoSSEET2015), a conference dedicated to address the challenges in the areas of sports science, exercise, sports engineering and technology including other areas of sports, thereby presenting a consolidated view to the interested researchers in the aforesaid fields. The goal of this conference was to bring together researchers and practitioners from academia and industry to focus on the scope of the conference and establishing new collaborations in these areas. The topics of interest are in mainly (1) Sports and Exercise Science (2) Sports Engineering and Technology Application (3) Sports Industry and Management.
Technological characteristics of yeast-containing cakes production using waxy wheat flour
Directory of Open Access Journals (Sweden)
K. Iorgachova
2016-12-01
Full Text Available This article shows the feasibility of using waxy wheat flour, the starch of which doesn`t contain amylose, in order to stabilize the quality of yeast-containing cakes. The influence of the waxy wheat flour mass fraction and the stage of its adding on the physical, chemical and organoleptic characteristics of the products are studied. According to the technological properties of a new type of wheat flour, two methods of its adding are proposed ‒ adding the maximum amount of waxy wheat flour at dough kneading stage or using the mixture of waxy and bakery wheat flours for kneading sourdough and dough. It is shown that the replacement of 60 % bakery wheat flour with waxy wheat flour in the recipe of yeast-containing cakes at the dough kneading stage contributes to the production of products with higher quality and organoleptic characteristics compared to both the control and cakes based on a mixture of different types of wheat flour. These samples are characterized by increased by 1.7 – 11.3 % specific volume, porosity – 2.6 – 5.5 % and the total deformation of the crumb – 6.5 – 41.4 %.
International Nuclear Information System (INIS)
Tso, C.
2009-01-01
The application of hydrogen and fuel cells has expanded as the technology in international markets has improved. Leading countries have focused on establishing hydrogen and fuel cell technology standards. Both the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) continuously release new hydrogen and fuel cell related standards. Although the government of Taiwan is promoting the development of a hydrogen and fuel cell industry, it may delay the commercialized schedule if there are no hydrogen and fuel cell related standards and regulations in place. Standards and regulations must be established as quickly as possible in order to accelerate the progress of the hydrogen and fuel cell industry. This presentation reviewed the international progress in hydrogen and fuel cell development and explained Taiwan's response strategies regarding the adoption of hydrogen and fuel cell products in niche Taiwanese markets
Contributions to the 1st Int. Conference on new laser technologies and applications
International Nuclear Information System (INIS)
1988-01-01
The report contains ten papers contributing to the first International conference on new laser technologies held in Olympia from 19 to 23 June 1988. They represent the activities in this field carried out by the ENEA Department of Basic Technologies
Energy Technology Data Exchange (ETDEWEB)
Gagnon-Lebrun, F. [Global and Structural Policies Division, Organisation for Economic Co-operation and Development OECD, Paris (France)
2004-07-01
Mitigating climate change and achieving stabilisation of greenhouse gas atmospheric concentrations will require deep reductions in global emissions of energy-related carbon dioxide emissions. Developing and disseminating new, low-carbon energy technology will thus be needed. Two previous AIXG papers have focused on possible drivers for such a profound technological change: Technology Innovation, Development and Diffusion, released in June 2003, and International Energy Technology Collaboration and Climate Change Mitigation, released in June 2004. The first of these papers assesses a broad range of technical options for reducing energy-related CO2 emissions. It examines how technologies evolve and the role of research and development efforts, alternative policies, and short-term investment decisions in making long-term options available. It considers various policy tools that may induce technological change, some very specific, and others with broader expected effects. Its overall conclusion is that policies specifically designed to promote technical change, or 'technology push', could play a critical role in making available and affordable new energy technologies. However, such policies would not be sufficient to achieve the Convention's objective in the absence of broader policies. First, because there is a large potential for cuts that could be achieved in the short run with existing technologies; and second, the development of new technologies requires a market pull as much as a technology push. The second paper considers the potential advantages and disadvantages of international energy technology collaboration and transfer for promoting technological change. Advantages of collaboration may consist of lowering R and D costs and stimulating other countries to invest in R and D; disadvantage may include free-riding and the inefficiency of reaching agreement between many actors. This paper sets the context for further discussion on the role of
The Effects of the Emission Cost on Route Choices of International Container Ships
Directory of Open Access Journals (Sweden)
Hyangsook Lee
2016-01-01
Full Text Available Maritime freight shipping has increased significantly and air pollution from international ships has grown accordingly, having serious environmental effects all over the world. This paper analyzes the effects of the emission cost on ocean route choices, focusing on international container ships. First, the paper formulates a freight network model that captures decisions and interactions of ocean carriers and port terminal operators in the maritime freight transport system. Then, the emission cost is calculated based on an activity-based approach as a component of the ocean transportation cost function. A case study is examined to find if the emission cost affects ocean route choices. The results indicate that the optimal ocean route and transportation cost are changed distinctively due to the emission cost. The research discusses how the emission cost plays a role in route changes and why ocean carriers have to consider these costs in their routing decisions.
Impact of Information and Communication Technologies in International Negotiation Performance
Cano, Jose Alejandro; Baena, Jose Jaime
2015-01-01
Objective – This article establishes relations between the level of importance of Information and Communication Technologies (ICT), the frequency of use of these tools, and the efficiency and efficacy achieved in the international negotiation processes.Design/methodology/approach – A research study is carried out in 180 import and / or export firms in Medellin city, and the proposed relations are explained through a theoretical model. With the information obtained, correlation and comparative...
Determining Domestic Container Shipping as an Enforcement of Indonesian International Hub Port
Nur, H. I.; Lazuardi, S. D.; Hadi, F.; Hapis, M.
2018-03-01
According to Presidential Regulation Number 26 year of 2012 about the National Logistics System Development Blueprint, the Indonesian government proposed to build two international hub ports, which were in Port of Kuala Tanjung for the western region and Port of Bitung for eastern region. Therefore, the optimum routes and fleet size are required to support the enforcement of Indonesian International Hub Port. The optimization model is used to obtain the optimum route and fleet by minimizing the total shipping costs, while considering the container demand. The result of analysis obtained that the optimum route and fleet size for the western region of Indonesia were: (1) Kuala Tanjung-Belawan required 15 ships of 1,000 TEU; (2) Kuala Tanjung-Tanjung Priok required 73 ships of 2,500 TEU; (3) Kuala Tanjung- Tanjung Perak required 44 ships of 2,500 TEU. Meanwhile, the optimum route and fleet size for the eastern region of Indonesia consisted of: (1) Bitung-Sorong required 1 ship of 500 TEU; (2) Bitung-Banjarmasin required 3 ships of 500 TEU; and (3) Bitung-Makassar required 1 ship of 1,500 TEU.
2nd International Conference on Electrical Systems, Technology and Information 2015
Tanoto, Yusak; Lim, Resmana; Santoso, Murtiyanto; Pah, Nemuel
2016-01-01
This book includes the original, peer-reviewed research papers from the 2nd International Conference on Electrical Systems, Technology and Information (ICESTI 2015), held in September 2015 at Patra Jasa Resort & Villas Bali, Indonesia. Topics covered include: Mechatronics and Robotics, Circuits and Systems, Power and Energy Systems, Control and Industrial Automation, and Information Theory. It explores emerging technologies and their application in a broad range of engineering disciplines, including communication technologies and smart grids. It examines hybrid intelligent and knowledge-based control, embedded systems, and machine learning. It also presents emerging research and recent application in green energy system and storage. It discusses the role of electrical engineering in biomedical, industrial and mechanical systems, as well as multimedia systems and applications, computer vision and image and signal processing. The primary objective of this series is to provide references for disseminat...
PREFACE: International Seminar on Science and Technology of Glass Materials (ISSTGM-2009)
Veeraiah, N.
2009-07-01
The progress of the human race is linked with the development of new materials and also the values they acquired in the course of time. Though the art of glass forming has been known from Egyptian civilization, the understanding and use of these glasses for technological applications only became possible once the structural aspects were revealed by the inspiring theories proposed by William H Zachariasen. Glass and glass ceramics have become the essential materials for modern technology. The applications of these materials are wide and cover areas such as optical communication, laser host, innovative architecture, bio-medical, automobile and space technology. As we master the technology, we must also learn to use it judiciously and for the overall development of all in this global village. The International Seminar on Science and Technology of Glass Materials (ISSTGM-2009) is organized to bring together scientists, academia and industry in order to discuss various aspects of the technology and to inspire young scholars to take up fruitful research. Various topics such as glass formation and glass-ceramics, glass structure, applications of glass and glass ceramics in nuclear waste management, radiation dosimetry, electronics and information technology, biotechnological applications, bulk metallic glasses, glasses containing nano-particles, hybrid glasses, novel glasses and applications in photonics, Non-linear optics and energy generation were discussed. In this volume, 59 research articles covering 18 invited talks, 10 oral presentations and 31 poster presentations are included. We hope these will serve as a valuable resource to all the scientists and scholars working with glass materials. Acharya Nagarjuna University, established in 1976, is named after the great Buddhist preceptor and philosopher, Acharya Nagarjuna, who founded a university on the banks of river Krishna some centuries ago. The University is situated between Vijayawada and Guntur, the famous
Yang, Xiaoliang
Is a global research partnership effective in developing, deploying, and diffusing clean energy technologies? Drawing on and extending innovation system studies, this doctoral dissertation elaborates an analytical model for a global technology learning system; examines the rationales, mechanisms, and effectiveness of the United States-- China Clean Energy Research Center Advanced Coal Technology Consortium (CERC-ACTC); and analyzes government's role in developing and implementing carbon capture and storage technologies in the United States (U.S.) and China. Studies have shown that successful technology innovation leads to economic prosperity and national competence, and prove that technology innovation does not happen in isolation but rather within interactive systems among stakeholders. However, the innovation process itself remains unclear, particularly with regard to interactive learning among and between major institutional actors, including technology developers, regulators, and financial organizations. This study seeks to advance scholarship on the interactive learning from the angle of global interactive learning. This dissertation research project seeks, as well, to inform policy-makers of how to strengthen international collaboration in clean energy technology development. The U.S.--China CERC-ACTC announced by Presidents Obama and Hu in 2009, provided a unique opportunity to close this scholarly gap. ACTC aimed to "advance the coal technology needed to safely, effectively, and efficiently utilize coal resources including the ability to capture, store, and utilize the emissions from coal use in both nations " through the joint research and development by U.S. and Chinese scientists and engineers. This dissertation project included one-year field research in the two countries, with in-depth interviews of key stakeholders, a survey of Consortium participants, analysis of available data, and site visits to collaborative research projects from 2013-2014. This
International bulletin on atomic and molecular data for fusion
International Nuclear Information System (INIS)
Stephens, J.A.; Bannister, M.E.; Fuhr, J.
1999-12-01
The International Bulletin on Atomic and Molecular Data for Fusion is prepared by the Atomic and Molecular Data Unit of the International Atomic Energy Agency. It is distributed free of charge by the IAEA to assist in the development of fusion research and technology. In part 1, the Atomic and Molecular Data Information System (AMDIS) is presented. In Part 2, the indexed papers are listed separately for structure and spectra, atomic and molecular collisions and surface interactions. Part 3 contains all the bibliographic data for both the indexed and non-indexed references. Finally, the Author Index (part 4) refers to the bibliographic references contained in part 3
ic-cmtp3: 3rd International Conference on Competitive Materials and Technology Processes
2016-04-01
Competitiveness is one of the most important factors in our lives and it plays a key role in the efficiency both of organizations and societies. The more scientifically advanced and prepared organizations develop more competitive materials with better physical, chemical, and biological properties, and the leading companies apply more competitive equipment and technological processes. The aims of the 3rd International Conference on Competitive Materials and Technology Processes (ic-cmtp3), and the 1st International Symposium on Innovative Carbons and Carbon Based Materials (is-icbm1) and the 1st International Symposium on Innovative Construction Materials (is-icm1) organized alongside are the following: —Promote new methods and results of scientific research in the fields of material, biological, environmental and technological sciences; —Exchange information between the theoretical and applied sciences as well as technical and technological implementations; —Promote communication and collaboration between the scientists, researchers and engineers of different nations, countries and continents. Among the major fields of interest are advanced and innovative materials with competitive characteristics, including mechanical, physical, chemical, biological, medical and thermal, properties and extreme dynamic strength. Their crystalline, nano - and micro-structures, phase transformations as well as details of their technological processes, tests and measurements are also in the focus of the ic-cmtp3 conference and the is-scbm1 and is-icm1 symposia. Multidisciplinary applications of material science and the technological problems encountered in sectors like ceramics, glasses, thin films, aerospace, automotive and marine industries, electronics, energy, construction materials, medicine, biosciences and environmental sciences are of particular interest. In accordance with the program of the ic-cmtp3 conference and is-icbm1 and is-icm1 symposia we have received more
Evaluation of information technology impact on effective internal control in the University system
Energy Technology Data Exchange (ETDEWEB)
Sanusi Fasilat, A., E-mail: Fasilat17@gmail.com; Hassan, Haslinda, E-mail: lynn@uum.edu.my [School of Accountancy, College of Business, Universiti Utara Malaysia, Sintok, Kedah (Malaysia)
2015-12-11
Information Technology (IT) plays a key role in internal control system in various organizations in terms of maintaining records and other internal services. Internal control system is defined as an efficient control procedures set up by firm to safeguard resources and to assure the reliability and accuracy of both financial and non-financial records in line with applicable governance and procedure to acquire the established goal and objectives. This paper focuses on the impact of IT on internal control system in the Nigerian universities. Data are collected from three different universities via questionnaire. Descriptive statistics is used to analyze the data; Chi-square is performed to test the hypothesis. The results of the hypothesis showed that IT has a positive relationship with the effective internal control activities in the University system. It is concluded that the adoption of IT will significantly improve the effectiveness of the internal control system operations in the University in terms of quality service delivery.
Evaluation of information technology impact on effective internal control in the University system
International Nuclear Information System (INIS)
Sanusi Fasilat, A.; Hassan, Haslinda
2015-01-01
Information Technology (IT) plays a key role in internal control system in various organizations in terms of maintaining records and other internal services. Internal control system is defined as an efficient control procedures set up by firm to safeguard resources and to assure the reliability and accuracy of both financial and non-financial records in line with applicable governance and procedure to acquire the established goal and objectives. This paper focuses on the impact of IT on internal control system in the Nigerian universities. Data are collected from three different universities via questionnaire. Descriptive statistics is used to analyze the data; Chi-square is performed to test the hypothesis. The results of the hypothesis showed that IT has a positive relationship with the effective internal control activities in the University system. It is concluded that the adoption of IT will significantly improve the effectiveness of the internal control system operations in the University in terms of quality service delivery
Evaluation of information technology impact on effective internal control in the University system
Sanusi Fasilat, A.; Hassan, Haslinda
2015-12-01
Information Technology (IT) plays a key role in internal control system in various organizations in terms of maintaining records and other internal services. Internal control system is defined as an efficient control procedures set up by firm to safeguard resources and to assure the reliability and accuracy of both financial and non-financial records in line with applicable governance and procedure to acquire the established goal and objectives. This paper focuses on the impact of IT on internal control system in the Nigerian universities. Data are collected from three different universities via questionnaire. Descriptive statistics is used to analyze the data; Chi-square is performed to test the hypothesis. The results of the hypothesis showed that IT has a positive relationship with the effective internal control activities in the University system. It is concluded that the adoption of IT will significantly improve the effectiveness of the internal control system operations in the University in terms of quality service delivery.
1st International Nuclear Science and Technology Conference 2014 (INST2014)
2015-04-01
Nuclear technology has played an important role in many aspects of our lives, including agriculture, energy, materials, medicine, environment, forensics, healthcare, and frontier research. The International Nuclear Science and Technology Conference (INST) aims to bring together scientists, engineers, academics, and students to share knowledge and experiences about all aspects of nuclear sciences. INST has evolved from a series of national conferences in Thailand called Nuclear Science and Technology (NST) Conference, which has been held for 11 times, the first being in 1986. INST2014 was held in August 2014 and hosted by Thailand Institute of Nuclear Technology (TINT). The theme was "Driving the future with nuclear technology". The conference working language was English. The proceedings were peer reviewed and considered for publication. The topics covered in the conference were: • Agricultural and food applications [AGR] • Environmental applications [ENV] • Radiation processing and industrial applications [IND] • Medical and nutritional applications [MED] • Nuclear physics and engineering [PHY] • Nuclear and radiation safety [SAF] • Other related topics [OTH] • Device and instrument presentation [DEV] Awards for outstanding oral and poster presentations will be given to qualified students who present their work during the conference.
Reactor container and controlling method thereof
International Nuclear Information System (INIS)
Hosaka, Seiichi.
1990-01-01
An object of the present invention is to prevent stress corrosion crack caused in pipelines made of stainless steels by preventing deposition of chlorine, etc. on the surface, etc. of the pipelines. That is, an internal evolving gas elimination system comprises a gas extraction device for extracting gases in the reactor container, an obstacle elimination device for eliminating obstacles contained in the extracted gases and an internal gas elimination device for eliminating internal evolving gases contained in the extracted gases. Further, gases in the upper portion of the reactor container are extracted and then the ingredients of the internal evolving gases contained in the gases are eliminated and, thereafter, the gases are supplied to the lower portion of the container to keep the relative humidity in the reactor container to less than 20%RH. As a result, since the internal evolving gases are eliminated and the relative humidity at the inside is kept to less than 20%RH, deposition of chlorine or salts on the pipelines can be prevented to thereby prevent the stress corrosion cracks. (I.S.)
Health risks in international container and bulk cargo transport due to volatile toxic compounds.
Baur, Xaver; Budnik, Lygia Therese; Zhao, Zhiwei; Bratveit, Magne; Djurhuus, Rune; Verschoor, Louis; Rubino, Federico Maria; Colosio, Claudio; Jepsen, Jorgen R
2015-01-01
To ensure the preservation and quality of the goods, physical (i.e. radiation) or chemical pest control is needed. The dark side of such consents may bear health risks in international transport and production sharing. In fact, between 10% and 20% of all containers arriving European harbors were shown to contain volatile toxic substances above the exposure limit values. Possible exposure to these toxic chemicals may occur not only for the applicators but also the receiver by off gassing from products, packing materials or transport units like containers. A number of intoxications, some with lethal outcome, occur not only during the fumigation, but also during freight transport (on bulk carriers and other transport vessels), as well as in the logistic lines during loading and unloading. Risk occupations include dock-workers, seafarers, inspectors, as well as the usually uninformed workers of importing enterprises that unload the products. Bystanders as well as vulnerable consumers may also be at risk. Ongoing studies focus on the release of these toxic volatile substances from various goods. It was shown that the half-lives of the off-gassing process range between minutes and months, depending on the toxic substance, its chemical reactivity, concentration, the temperature, the contaminated matrix (goods and packing materials), and the packing density in the transport units. Regulations on declaration and handling dangerous goods are mostly not followed. It is obvious that this hazardous situation in freight transport urgently requires preventive steps. In order to improve awareness and relevant knowledge there is a need for more comprehensive information on chemical hazards and a broader implementation of the already existing regulations and guidelines, such as those from ILO, IMO, and national authorities. It is also necessary to have regular controls by the authorities on a worldwide scale, which should be followed by sanctions in case of disregarding regulations
Arellano, L.E.; Willett, J.M.; Borry, P.
2011-01-01
Objectives: The objective of this exploratory study was to survey international health technology assessment (HTA) professionals to determine attitudes toward ethics in HTA. Methods: An exploratory, quantitative, cross-sectional study design was developed. The sample population (n = 636) was
THE NEED FOR A NEW JOINING TECHNOLOGY FOR THE CLOSURE WELDING OF RADIOACTIVE MATERIALS CONTAINERS
International Nuclear Information System (INIS)
CANNELL GR; HILL BE; GRANT GJ
2008-01-01
One of the activities associated with cleanup throughout the Department of Energy (DOE) complex is packaging radioactive materials into storage containers. Much of this work will be performed in high-radiation environments requiring fully remote operations, for which existing, proven systems do not currently exist. These conditions demand a process that is capable of producing acceptable (defect-free) welds on a consistent basis; the need to perform weld repair, under fully-remote operations, can be extremely costly and time consuming. Current closure welding technology (fusion welding) is not well suited for this application and will present risk to cleanup cost and schedule. To address this risk, Fluor and the Pacific Northwest National Laboratory (PNNL), are proposing that a new and emerging joining technology, Friction Stir Welding (FSW), be considered for this work. FSW technology has been demonstrated in other industries (aerospace and marine) to produce near flaw-free welds on a consistent basis. FSW is judged capable of providing the needed performance for fully-remote closure welding of containers for radioactive materials for the following reasons: FSW is a solid-state process; material is not melted. As such, FSW does not produce the type of defects associated with fusion welding, e.g., solidification-induced porosity, cracking, distortion due to weld shrinkage, and residual stress. In addition, because FSW is a low-heat input process, material properties (mechanical, corrosion and environmental) are preserved and not degraded as can occur with 'high-heat' fusion welding processes. When compared to fusion processes, FSW produces extremely high weld quality. FSW is performed using machine-tool technology. The equipment is simple and robust and well-suited for high radiation, fully-remote operations compared to the relatively complex equipment associated with the fusion-welding processes. Additionally, for standard wall thicknesses of radioactive materials
Skoretz, Yvonne M.; Cottle, Amy E.
2011-01-01
Meeting International Society for Technology in Education competencies creates a challenge for teachers. The authors provide a problem-based video framework that guides teachers in enhancing 21st century skills to meet those competencies. To keep the focus on the content, the authors suggest teaching the technology skills only at the point the…
Directory of Open Access Journals (Sweden)
Tatiana A. Demina
2017-02-01
Full Text Available Members of the virus family Sphaerolipoviridae include both archaeal viruses and bacteriophages that possess a tailless icosahedral capsid with an internal membrane. The genera Alpha- and Betasphaerolipovirus comprise viruses that infect halophilic euryarchaea, whereas viruses of thermophilic Thermus bacteria belong to the genus Gammasphaerolipovirus. Both sequence-based and structural clustering of the major capsid proteins and ATPases of sphaerolipoviruses yield three distinct clades corresponding to these three genera. Conserved virion architectural principles observed in sphaerolipoviruses suggest that these viruses belong to the PRD1-adenovirus structural lineage. Here we focus on archaeal alphasphaerolipoviruses and their related putative proviruses. The highest sequence similarities among alphasphaerolipoviruses are observed in the core structural elements of their virions: the two major capsid proteins, the major membrane protein, and a putative packaging ATPase. A recently described tailless icosahedral haloarchaeal virus, Haloarcula californiae icosahedral virus 1 (HCIV-1, has a double-stranded DNA genome and an internal membrane lining the capsid. HCIV-1 shares significant similarities with the other tailless icosahedral internal membrane-containing haloarchaeal viruses of the family Sphaerolipoviridae. The proposal to include a new virus species, Haloarcula virus HCIV1, into the genus Alphasphaerolipovirus was submitted to the International Committee on Taxonomy of Viruses (ICTV in 2016.
International Nuclear Information System (INIS)
Dudala, J.; Stegowski, Z.
2011-01-01
The main object of the International Conference on Development and Applications of Nuclear Technologies - NUTECH (Cracow, 11-14 September 2011) is to bring together scientists working on the development and application of nuclear technologies and to discuss further research fulfilling the needs of modern society. In the conference participate over 160 researchers from about 20 countries - among them from USA, France, Germany, Italy, Republic of South Africa, Japan, China, Brazil and South Korea . Book of Abstracts covers over 170 presentations - 13 plenary lectures, 42 section lectures and 118 posters. Thy provide information about possibilities and results of the applications of nuclear technologies in the modern economy of the 21 th century and cover the following topics: (a) nuclear energy in Poland; (b) applications of nuclear techniques; (c) nuclear energy and management of radioactive wastes; (d) radiation chemistry; (e) dosimetry and radiation protection; (f) environmental studies; (g) radiotherapy; (h) radiometric measurements; (i) radiopharmaceuticals and radioisotope production; (j) characterization of materials; (k) biomedical studies; (l) nuclear techniques in preserving cultural heritage; (m) applications of nuclear technologies in agriculture and food processing; (n) technological developments. The conference refers to 100-anniversary of the Nobel Prize in Chemistry for Maria Sklodowska-Curie. The conference is organized by Faculty of Physics and Applied Computer Science, AGH University of Science and Technology and Institute of Nuclear Chemistry and Technology. It is financially supported by Polish Energy Group Nuclear Energy S.A. (PGE, Energia Jadrowa), Polish Nuclear Society (PTN), International Atomic Energy Agency, National Atomic Agency (PAA), European Nuclear Society and Municipality of Cracow.
Energy Technology Data Exchange (ETDEWEB)
Dudala, J; Stegowski, Z [ed.
2011-07-01
The main object of the International Conference on Development and Applications of Nuclear Technologies - NUTECH (Cracow, 11-14 September 2011) is to bring together scientists working on the development and application of nuclear technologies and to discuss further research fulfilling the needs of modern society. In the conference participate over 160 researchers from about 20 countries - among them from USA, France, Germany, Italy, Republic of South Africa, Japan, China, Brazil and South Korea . Book of Abstracts covers over 170 presentations - 13 plenary lectures, 42 section lectures and 118 posters. Thy provide information about possibilities and results of the applications of nuclear technologies in the modern economy of the 21{sup th} century and cover the following topics: (a) nuclear energy in Poland; (b) applications of nuclear techniques; (c) nuclear energy and management of radioactive wastes; (d) radiation chemistry; (e) dosimetry and radiation protection; (f) environmental studies; (g) radiotherapy; (h) radiometric measurements; (i) radiopharmaceuticals and radioisotope production; (j) characterization of materials; (k) biomedical studies; (l) nuclear techniques in preserving cultural heritage; (m) applications of nuclear technologies in agriculture and food processing; (n) technological developments. The conference refers to 100-anniversary of the Nobel Prize in Chemistry for Maria Sklodowska-Curie. The conference is organized by Faculty of Physics and Applied Computer Science, AGH University of Science and Technology and Institute of Nuclear Chemistry and Technology. It is financially supported by Polish Energy Group Nuclear Energy S.A. (PGE, Energia Jadrowa), Polish Nuclear Society (PTN), International Atomic Energy Agency, National Atomic Agency (PAA), European Nuclear Society and Municipality of Cracow.
Spill or leak? Carbon leakage with international technology spillovers : A CGE analysis
Gerlagh, R.; Kuik, O.
This paper studies the effect of endogenous technical change and international technology spillovers on carbon leakage. It is well known that a unilateral CO2 abatement policy in one region may cause CO2 emissions to increase in non-abating regions because of the relocation of CO2-intensive firms
Segmentation and packaging reactor vessels internals
International Nuclear Information System (INIS)
Boucau, Joseph
2014-01-01
Document available in abstract form only, full text follows: With more than 25 years of experience in the development of reactor vessel internals and reactor vessel segmentation and packaging technology, Westinghouse has accumulated significant know-how in the reactor dismantling market. The primary challenges of a segmentation and packaging project are to separate the highly activated materials from the less-activated materials and package them into appropriate containers for disposal. Since disposal cost is a key factor, it is important to plan and optimize waste segmentation and packaging. The choice of the optimum cutting technology is also important for a successful project implementation and depends on some specific constraints. Detailed 3-D modeling is the basis for tooling design and provides invaluable support in determining the optimum strategy for component cutting and disposal in waste containers, taking account of the radiological and packaging constraints. The usual method is to start at the end of the process, by evaluating handling of the containers, the waste disposal requirements, what type and size of containers are available for the different disposal options, and working backwards to select a cutting method and finally the cut geometry required. The 3-D models can include intelligent data such as weight, center of gravity, curie content, etc, for each segmented piece, which is very useful when comparing various cutting, handling and packaging options. The detailed 3-D analyses and thorough characterization assessment can draw the attention to material potentially subject to clearance, either directly or after certain period of decay, to allow recycling and further disposal cost reduction. Westinghouse has developed a variety of special cutting and handling tools, support fixtures, service bridges, water filtration systems, video-monitoring systems and customized rigging, all of which are required for a successful reactor vessel internals
2011-11-15
... FEDERAL TRADE COMMISSION [File No. 111 0097] Healthcare Technology Holdings, Inc.; Analysis of Proposed Agreement Containing Consent Orders To Aid Public Comment Correction In notice document 2011-28497 appearing on pages 68189-68191 in the issue of Thursday, November 3, 2011, make the following corrections: 1...
International Nuclear Information System (INIS)
2001-01-01
The publication on CD-ROM and includes 145 presentations delivered at the congress. In the work of the International Youth Nuclear Congress 2000 participated 288 young scientific works from over 30 countries. The address discusses the following sessions: Young Generation Session Nuclear Education and Transfer of Know-How; Nuclear Technology I; Political Aspects; Nuclear Technology II; Environment and Safety; Communication and Public Perception I; Communication and Public Perception II; Nuclear Programs and Technical Cooperation; Economics; Fuel Cycle Challenges. Each paper has been indexed separately. Before of full papers the first CD contains next chapters: Introduction (in 19 languages); General Information; Day by Day; Y-Notes Session Results; Sponsors; Media Album, and Conclusions. The second CD-ROM contains 28 minutes of video-film about programme of International Youth Nuclear Congress 2000
Installation technology of reactor internals on shroud replacement work
International Nuclear Information System (INIS)
Miyano, Hiroshi
1999-01-01
Since the replacement of large welded reactor internals much as a core shroud did not have a precedent in the world, quite a few technologies had to be developed. Especially for the installation of new core shroud, jet pumps, core plate and top guide, the accurate weld and fit-up techniques for large structures was required to secure their integrity. The vessel shielding system was utilized to reduce general area dose rate such that all replacement work. For jet pump installation, automatic remote welding machines were used for high radiation area. As for the core shroud, shroud support weld prep machining tool with high accuracy, jacking system to support fit-up, new weld machine for small work space and low heat input weld joint were developed. Shroud replacement work in Fukushima Dai-ichi NPS Unit 3 (1F-3) with application of these development techniques, was successfully accomplished. The technology is applied for 1F-2 replacement work also. (author)
International Nuclear Information System (INIS)
Massinon, B.
1999-01-01
The French experience concerning CTBT verification-related technologies for peaceful purposes as well a the international cooperation in this field are presented. Possible objectives and cooperation program needs are cited. French experience in international cooperation is related to seismology and seismic hazards in Bolivia, Madagascar, Nepal and Indonesia and is considered as very constructive, meaning that technical experience is developed, consistent scientific results are obtained, and a considerable yield to the CTBT task is achieved. Large scientific benefits are expected from the CTBTO
Proceedings of the international conference on science, technology and applications of rare earths
International Nuclear Information System (INIS)
2015-01-01
Rare Earth Elements (REEs) are extensively used in clean energy applications like wind turbines, hybrid car batteries/electric motors, solar energy collectors, permanent magnets, phosphors, multifunctional pigments, thin film technologies, defence - related systems, etc. The use of rare earth elements in modern technology has increased several folds over the past few years in both domestic and international sectors due to the growing economy. The current global demand for rare earths is expected to provide a myriad of business opportunities for rare earth industries across the world including India for the utilization of rare earths in green energy, technology and industry. Papers relevant to INIS are indexed separately
International Nuclear Information System (INIS)
Guziel, K.A.; Poch, L.A.; Gillette, J.L.; Buehring, W.A.
1991-07-01
The need for environmentally responsible electricity generation is a worldwide concern. Because coal is available throughout the world at a reasonable cost, current research is focusing on technologies that use coal with minimal environmental effects. The United States government is supporting research on clean coal technologies (CCTs) to be used for new capacity additions and for retrofits to existing capacity. To promote the worldwide adoption of US CCTs, the US Department of Energy, the US Agency for International Development, and the US Trade and Development Program sponsored a two-week seminar titled Clean Coal Technologies -- An International Seminar. Nineteen participants from seven countries were invited to this seminar, which was held at Argonne National Laboratory in June 1991. During the seminar, 11 US CCT vendors made presentations on their state-of-the-art and commercially available technologies. The presentations included technical, environmental, operational, and economic characteristics of CCTs. Information on financing and evaluating CCTs also was presented, and participants visited two CCT operating sites. The closing evaluation indicated that the seminar was a worthwhile experience for all participants and that it should be repeated. The participants said CCT could play a role in their existing and future electric capacity, but they agreed that more CCT demonstration projects were needed to confirm the reliability and performance of the technologies
Container transport direct call – logistic solution to container transport via Estonia
Directory of Open Access Journals (Sweden)
A. Tolli
2007-12-01
Full Text Available Container transport in the world grows up to 12 % every year. Chinese container transport contributes majority of container flows in international container transport. Many world seaports compete for Chinese container flows and make eff orts to get investments and direct calls from China to their ports. Estonia has a possibility to decrease its large dependence and risks due to the transit of oil and oil products and coal with the help of container flows from China. In addition to a favorable geographical location Estonia has several other important arguments, like suffi cient land in the harbours for developing a container terminal to launch extensive container transport transit from China. Port of St. Petersburg, container transport port closest to Estonia by the Baltic Sea, is overloaded. Estonia can compete for container flows directed to Moscow, Nizhniy Novgorod, Kazan and Kaluga. Construction of an international high-tech container terminal in Port of Tallinn serves as one important precondition for directing Russian transit container flows through Estonia. Such a container terminal could service also larger vessels and container flows from China. Container lines and container terminals operating as alliances are jointly able to substantially increase container flows through countries.
Guide to cleaner coal technology-related web sites
Energy Technology Data Exchange (ETDEWEB)
Davidson, R; Jenkins, N; Zhang, X [IEA Coal Research - The Clean Coal Centre, London (United Kingdom)
2001-07-01
The 'Guide to Cleaner Coal Technology-Related Web Sites' is a guide to web sites that contain important information on cleaner coal technologies (CCT). It contains a short introduction to the World Wide Web and gives advice on how to search for information using directories and search engines. The core section of the Guide is a collection of factsheets summarising the information available on over 65 major web sites selected from organizations worldwide (except those promoting companies). These sites contain a wealth of information on CCT research and development, technology transfer, financing and markets. The factsheets are organised in the following categories. Associations, research centres and programmes; Climate change and sustainable development; Cooperative ventures; Electronic journals; Financial institutions; International organizations; National government information; and Statistical information. A full subject index is provided. The Guide concludes with some general comments on the quality of the sites reviewed.
Energy Technology Data Exchange (ETDEWEB)
NONE
1996-11-11
The International Symposium for the Promotion of APEC Environmental Technology Exchange was held under the theme `The function and role expected of the APEC Virtual Center,` with the objectives of clarifying the need for future intra-regional environmental technological exchange, defining the types of information and personnel exchange, and promoting the use of interactive character of the APEC Virtual Center for Environmental Technology Exchange by encouraging access to and participation in the Virtual Center project. It was held in the period of 11th and 12th, November in 1996, at the venue of Rinku International Convention Center in Osaka. The symposium was attended by 477 persons from nine countries, i.e., Australia, Canada, China, Indonesia, Korea, Philippines, Thailand, the US, and Japan, comprising staff members of intra-regional environment-related organizations. After the keynote speech, `Current status and tasks of environmental technology exchange`, and `Expected roles of the Virtual Center for Environmental Technology Exchange` were discussed. During the plenary session, the chairman summarized the symposium. This summary was carried on the Virtual Center homepage of the Internet
International MultiConference of Engineers and Computer Scientists 2013
Ao, Sio-Iong; Huang, Xu; Castillo, Oscar
2014-01-01
This volume contains revised and extended research articles written by prominent researchers participating in the international conference on Advances in Engineering Technologies and Physical Science was held in Hong Kong, 13-15 March, 2013. Topics covered include engineering physics, engineering mathematics, scientific computing, control theory, automation, artificial intelligence, electrical engineering, and industrial applications. The book offers the state of art of tremendous advances in engineering technologies and physical science and applications, and also serves as an excellent reference work for researchers and graduate students working with/on engineering technologies and physical science and applications.
International MultiConference of Engineers and Computer Scientists 2014
Ao, Sio-Iong; Huang, Xu; Castillo, Oscar
2015-01-01
This volume contains revised and extended research articles written by prominent researchers who participated in the international conference on Advances in Engineering Technologies, which was held in Hong Kong, 12-14 March, 2014. Topics covered include engineering physics, engineering mathematics, scientific computing, control theory, artificial intelligence, electrical engineering, communications systems, and industrial applications. The book offers the state of art of tremendous advances in engineering technologies and physical science and applications, and also serves as an excellent reference work for researchers and graduate students working with/on engineering technologies and physical science and applications.
Energy Technology Data Exchange (ETDEWEB)
NONE
2003-07-01
Genetic engineering is at the forefront of much biological research - basic, adaptive and applied or near market. Manipulation of genes to bring about the expression of a specific product, or to produce a characteristic or trait, offers exciting possibilities within both the plant and the animal kingdom. The opportunities, in terms of improving livestock productivity or reducing losses from disease, lie in a number of areas. In almost all areas of this research, isotopic markers are extensively used and are in most cases essential for achieving the levels of sensitivity required for genetic characterization and manipulation. Genetic engineering has the potential to solve many problems relating to animal productivity and health. At present the focus is on the problems that face livestock producers in the developed world. If the full benefit of this technology is to be realized globally, the problems confronting livestock farmers in developing countries will have to be considered. The characterization and application of methods in these regions has to be managed and exploited. It is hoped that this Symposium will stimulate the international exchange of information and ideas that contribute to greater accessibility and enhanced use of gene based technologies in animal agriculture in developing countries. OBJECTIVES: To create an interactive environment to discuss the role and future potential of gene based technologies for improving animal production and health; To identify constraints in the use of gene based technologies in developing countries and to determine how to use these technologies in a simple, practical way; To identify and prioritize specific research needs; To explore the possibility of international co-ordination in the area of gene based technologies in animal agriculture; To examine ethical, technological, policy and environmental issues and the role of nuclear techniques in the further development and application of gene based technologies with
International Nuclear Information System (INIS)
2003-01-01
Genetic engineering is at the forefront of much biological research - basic, adaptive and applied or near market. Manipulation of genes to bring about the expression of a specific product, or to produce a characteristic or trait, offers exciting possibilities within both the plant and the animal kingdom. The opportunities, in terms of improving livestock productivity or reducing losses from disease, lie in a number of areas. In almost all areas of this research, isotopic markers are extensively used and are in most cases essential for achieving the levels of sensitivity required for genetic characterization and manipulation. Genetic engineering has the potential to solve many problems relating to animal productivity and health. At present the focus is on the problems that face livestock producers in the developed world. If the full benefit of this technology is to be realized globally, the problems confronting livestock farmers in developing countries will have to be considered. The characterization and application of methods in these regions has to be managed and exploited. It is hoped that this Symposium will stimulate the international exchange of information and ideas that contribute to greater accessibility and enhanced use of gene based technologies in animal agriculture in developing countries. OBJECTIVES: To create an interactive environment to discuss the role and future potential of gene based technologies for improving animal production and health; To identify constraints in the use of gene based technologies in developing countries and to determine how to use these technologies in a simple, practical way; To identify and prioritize specific research needs; To explore the possibility of international co-ordination in the area of gene based technologies in animal agriculture; To examine ethical, technological, policy and environmental issues and the role of nuclear techniques in the further development and application of gene based technologies with
International Nuclear Information System (INIS)
Nakamura, Hiroo; Ida, Mizuho; Sugimoto, Masayoshi; Takeuchi, Hiroshi; Yutani, Toshiaki
2002-03-01
Activities of International Fusion Materials Irradiation Facility (IFMIF) have been performed under an IEA collaboration since 1995. IFMIF is an accelerator-based deuteron (D + )-lithium (Li) neutron source designed to produce an intense neutron field (2 MW/m 2 , 20 dpa/year for Fe) in a volume of 500 cm 3 for testing candidate fusion materials. In 2000, a 3 year Key Element technology Phase (KEP) of IFMIF was started to reduce the key technology risk factors. This interim report summarizes the KEP activities until mid 2001 in the major project work-breakdown areas of accelerator, target, test facilities and design integration. (author)
7th KES International Conference on Intelligent Decision Technologies
Jain, Lakhmi; Howlett, Robert
2015-01-01
This book presents the 57 papers accepted for presentation at the Seventh KES International Conference on Intelligent Decision Technologies (KES-IDT 2015), held in Sorrento, Italy, in June 2015. The conference consists of keynote talks, oral and poster presentations, invited sessions and workshops on the applications and theory of intelligent decision systems and related areas. The conference provides an opportunity for the presentation and discussion of interesting new research results, promoting knowledge transfer and the generation of new ideas. The book will be of interest to all those whose work involves the development and application of intelligent decision systems.
Component nuclear containment structure
International Nuclear Information System (INIS)
Harstead, G.A.
1979-01-01
The invention described is intended for use primarily as a nuclear containment structure. Such structures are required to surround the nuclear steam supply system and to contain the effects of breaks in the nuclear steam supply system, or i.e. loss of coolant accidents. Nuclear containment structures are required to withstand internal pressure and temperatures which result from loss of coolant accidents, and to provide for radiation shielding during operation and during the loss of coolant accident, as well as to resist all other applied loads, such as earthquakes. The nuclear containment structure described herein is a composite nuclear containment structure, and is one which structurally combines two previous systems; namely, a steel vessel, and a lined concrete structure. The steel vessel provides strength to resist internal pressure and accommodate temperature increases, the lined concrete structure provides resistance to internal pressure by having a liner which will prevent leakage, and which is in contact with the concrete structure which provides the strength to resist the pressure
International Nuclear Information System (INIS)
1997-04-01
The International Conference on space research, technology and conversion-II was held on 16-18 April, 1997 in Tashkent, Uzbekistan. The specialists discussed various aspects of space research, technology and conversion problems. More than 60 talks were presented in the meeting on the following subjects: remote sensing and the processing of satellite information; space navigation and others, including radiation effects in silicon solar cells caused by cosmic radiation. (A.A.D.)
Murdoch, Karen; Smith, Fred; Perry, Jay; Green, Steve
2004-01-01
When technologies are traded for incorporation into vehicle systems to support a specific mission scenario, they are often assessed in terms of Technology Readiness Level (TRL). TRL is based on three major categories of Core Technology Components, Ancillary Hardware and System Maturity, and Control and Control Integration. This paper describes the Technology Readiness Level assessment of the Carbon Dioxide Reduction Assembly (CRA) for use on the International Space Station. A team comprising of the NASA Johnson Space Center, Marshall Space Flight Center, Southwest Research Institute and Hamilton Sundstrand Space Systems International have been working on various aspects of the CRA to bring its TRL from 4/5 up to 6. This paper describes the work currently being done in the three major categories. Specific details are given on technology development of the Core Technology Components including the reactor, phase separator and CO2 compressor.
Directory of Open Access Journals (Sweden)
Maitrayee Ghosh
2013-11-01
Full Text Available International Association of Technological University Libraries (IATUL has been in the forefront of providing leadership to information professionals and promoting science and Technology librarianship in today's changing library landscape. The present article is an attempt to comprehend the present status of IATUL and analyze the activities and contribution it has made to overcome the range of challenges facing by tertiary level Technological libraries throughout the world. The SWOT analysis method is used to assess the achievements of IATUL, failures and ascertain constraints being faced in this internet age. The author relied on web sites as well as ephemeral material such as minutes, annu- al reports, newsletters, and memoranda to construct this article. Meeting and Interview with IATUL present and past presidents and other office bearers of the associations provided useful sources of information. It is also attempted to pro- vide relevant information for those interested to join IATUL for professional development.
Pressure Indication of 3013 Inner Containers Using Digital Radiography
International Nuclear Information System (INIS)
HENSEL, SJ
2004-01-01
Plutonium bearing materials packaged for long term storage per the Department of Energy Standard 3013 (DOE-STD-3013) are required to be examined periodically in a non-destructive manner (i.e. without compromising the storage containers) for pressure buildup. Radiography is the preferred technology for performing the examinations. The concept is to measure and record the container lid position. As a can pressurizes the lid will deflect outward and thus provide an indication of the internal pressure. A radiograph generated within 30 days of creation of each storage container serves as the baseline from which future surveillance examinations will be compared. A problem with measuring the lid position was discovered during testing of a digital radiography system. The solution was to provide a distinct feature upon the lower surface of the container lid from which the digital radiography system could easily track the lid position
International Nuclear Information System (INIS)
2017-11-01
Founded in 1997 at the initiative of ADEME and sponsored by the French government ministries for Ecology, Industry and Foreign Trade, Club ADEME International brings together over one hundred innovative French companies that are present in the world sustainable development market. Piloted by ADEME, this network of environmental business accompanies its members as they develop innovative international projects and partnerships dedicated to protecting the environment and mastering energy consumption. Club ADEME International, in liaison with ADEME and public bodies, offers many practical services business intelligence and information products, support for innovation-that members develop their international activity. This Club ADEME International catalogue presents an overview of technologies and services proposed by French eco-enterprises, essential components of global action to meet today's environmental, energy and climate challenges
International Nuclear Information System (INIS)
2013-01-01
Founded in 1997 at the initiative of ADEME and sponsored by the French government ministries for Ecology, Industry and Foreign Trade, Club ADEME International brings together over one hundred innovative French companies that are present in the world sustainable development market. Piloted by ADEME, this network of environmental business accompanies its members as they develop innovative international projects and partnerships dedicated to protecting the environment and mastering energy consumption. Club ADEME International, in liaison with ADEME and public bodies, offers many practical services business intelligence and information products, support for innovation-that members develop their international activity. This Club ADEME International catalogue presents an overview of technologies and services proposed by French eco-enterprises, essential components of global action to meet today's environmental, energy and climate challenges
International Nuclear Information System (INIS)
2016-01-01
Founded in 1997 at the initiative of ADEME and sponsored by the French government ministries for Ecology, Industry and Foreign Trade, Club ADEME International brings together over one hundred innovative French companies that are present in the world sustainable development market. Piloted by ADEME, this network of environmental business accompanies its members as they develop innovative international projects and partnerships dedicated to protecting the environment and mastering energy consumption. Club ADEME International, in liaison with ADEME and public bodies, offers many practical services business intelligence and information products, support for innovation-that members develop their international activity. This Club ADEME International catalogue presents an overview of technologies and services proposed by French eco-enterprises, essential components of global action to meet today's environmental, energy and climate challenges
International Nuclear Information System (INIS)
2015-01-01
Founded in 1997 at the initiative of ADEME and sponsored by the French government ministries for Ecology, Industry and Foreign Trade, Club ADEME International brings together over one hundred innovative French companies that are present in the world sustainable development market. Piloted by ADEME, this network of environmental business accompanies its members as they develop innovative international projects and partnerships dedicated to protecting the environment and mastering energy consumption. Club ADEME International, in liaison with ADEME and public bodies, offers many practical services business intelligence and information products, support for innovation-that members develop their international activity. This Club ADEME International catalogue presents an overview of technologies and services proposed by French eco-enterprises, essential components of global action to meet today's environmental, energy and climate challenges
International Nuclear Information System (INIS)
Hagem, Cathrine
2009-01-01
The clean development mechanism of the Kyoto Protocol may induce technological change in developing countries. As an alternative to the clean development mechanism regime, developing countries may accept a (generous) cap on their own emissions, allow domestic producers to invest in new efficient technologies, and sell the excess emission permits on the international permit market. The purpose of this article is to show how the gains from investment, and hence the incentive to invest in new technology in developing countries, differ between the two alternative regimes. We show that the difference in the gains from investment depends on whether the producers in developing countries face competitive or noncompetitive output markets, whether the investment affects fixed or variable production costs, and whether producers can reduce emissions through means other than investing in new technology. (author)
2nd International Conference on Recent Advances in Information Technology
Mukhopadhyay, Sushanta
2014-01-01
The book is based on the research papers presented in Second International Conference on Recent Advances in Information Technology (RAIT 2014), held at Indian School of Mines, Dhanbad, India. It provides the latest developments in the area of information technology and covers a variety of topics, including Advanced Algorithm Design and Analysis, Algorithmic Graph Theory, Artificial Intelligence, Bioinformatics, Circuit Design Automation, Computational Biology, Computational Mathematics, Cryptology, Data Compression, Database Management System, Data Mining, E-Applications, Embedded System, Information and Network Security, Information Retrieval, Internet Computing, etc. The objective is to familiarize the reader with the latest scientific developments that are taking place in various fields and the latest sophisticated problem solving tools that are being developed to deal with the complex and intricate problems that are otherwise difficult to solve by the usual and traditional methods.
Optical Multi-Gas Monitor Technology Demonstration on the International Space Station
Pilgrim, Jeffrey S.; Wood, William R.; Casias, Miguel E.; Vakhtin, Andrei B,; Johnson, Michael D.; Mudgett, Paul D.
2014-01-01
There are a variety of both portable and fixed gas monitors onboard the International Space Station (ISS). Devices range from rack-mounted mass spectrometers to hand-held electrochemical sensors. An optical Multi-Gas Monitor has been developed as an ISS Technology Demonstration to evaluate long-term continuous measurement of 4 gases. Based on tunable diode laser spectroscopy, this technology offers unprecedented selectivity, concentration range, precision, and calibration stability. The monitor utilizes the combination of high performance laser absorption spectroscopy with a rugged optical path length enhancement cell that is nearly impossible to misalign. The enhancement cell serves simultaneously as the measurement sampling cell for multiple laser channels operating within a common measurement volume. Four laser diode based detection channels allow quantitative determination of ISS cabin concentrations of water vapor (humidity), carbon dioxide, ammonia and oxygen. Each channel utilizes a separate vertical cavity surface emitting laser (VCSEL) at a different wavelength. In addition to measuring major air constituents in their relevant ranges, the multiple gas monitor provides real time quantitative gaseous ammonia measurements between 5 and 20,000 parts-per-million (ppm). A small ventilation fan draws air with no pumps or valves into the enclosure in which analysis occurs. Power draw is only about 3 W from USB sources when installed in Nanoracks or when connected to 28V source from any EXPRESS rack interface. Internal battery power can run the sensor for over 20 hours during portable operation. The sensor is controlled digitally with an FPGA/microcontroller architecture that stores data internally while displaying running average measurements on an LCD screen and interfacing with the rack or laptop via USB. Design, construction and certification of the Multi-Gas Monitor were a joint effort between Vista Photonics, Nanoracks and NASA-Johnson Space Center (JSC
Valk, Reimira; van der Velde, E.G.; van Engen, Marloes; Godbole, R.
2014-01-01
Purpose The purpose of this paper is to gain insight into international career motives, repatriation and career success of Indian women in Science and Technology. Design/methodology/approach In total, 30 semi-structured interviews were conducted with (upper) middle-class Indian women in Science and
Ganikhodjaev, Nasir; Mukhamedov, Farrukh; Hee, Pah Chin
2013-04-01
The 4th International Conference on the Advancement of Science and Technology 2012 (iCAST 2012), with theme 'Contemporary Mathematics, Mathematical Physics and their Applications', took place in Kuantan, Malaysia, from Wednesday 7 to Friday 9 November 2012. The conference was attended by more than 100 participants, and hosted about 160 oral and poster papers by more than 140 pre-registered authors. The key topics of the 4th iCAST 2012 include Pure Mathematics, Applied Mathematics, Theoretical/Mathematical Physics, Dynamical Systems, Statistics and Financial Mathematics. The scientific program was rather full since after the Keynote and Invited Talks in the morning, four parallel sessions ran every day. However, according to all attendees, the program was excellent with a high level of talks and the scientific environment was fruitful; thus all attendees had a creative time. The conference aimed to promote the knowledge and development of high-quality research in mathematical fields concerned with the application of other scientific fields as well as modern technological trends in physics, chemistry, biology, medicine, economics, sociology and environmental sciences. We would like to thank the Keynote and the Invited Speakers for their significant contributions to 4th iCAST 2012. We would also like to thank the members of the International Scientific Committee and the members of the Organizing Committee. We cannot end without expressing our many thanks to International Islamic University Malaysia and our sponsors for their financial support . This volume presents selected papers which have been peer-reviewed. The editors hope that it may be useful and fruitful for scholars, researchers, and advanced technical members of the industrial laboratory facilities for developing new tools and products. Guest Editors Nasir Ganikhodjaev, Farrukh Mukhamedov and Pah Chin Hee The PDF contains the committee lists, board list and biographies of the plenary speakers.
Consistent adoption of the International System of Units (SI) in nuclear science and technology
Energy Technology Data Exchange (ETDEWEB)
Klumpar, J; Kovar, Z [Ceskoslovenska Akademie Ved, Prague. Laborator Radiologicke Dozimetrie; Sacha, J [Slovenska Akademia Vied, Bratislava (Czechoslovakia). Fyzikalny Ustav
1975-11-01
The principles are stressed behind a consistent introduction of the International System of Units (SI) in Czechoslovakia complying with the latest edition of the Czechoslovak Standard CSN 01 1300 on the prescribed system of national and international units. The use of special and auxiliary units in nuclear physics and technology is discussed, particular attention being devoted to the units of activity and to the time units applied in radiology. Conversion graph and tables are annexed.
Canada and international safeguards. Verifying nuclear non-proliferation
International Nuclear Information System (INIS)
1990-01-01
The Non-Proliferation Treaty (NPT) came into force in 1970 and now has about 140 signatory nations. By creating legal barriers against proliferation and by promoting an international non-proliferation ethic, the NPT has promoted international peace and security. A key ingredient has been the confidence generated through verification by IAEA safeguards. By the end of 1988 IAEA safeguards agreements had been concluded with about 100 countries, including Canada. Over 500 nuclear facilities worldwide are under safeguards or contain safeguarded nuclear material. The existence of this credible and effective safeguards system makes international trade in nuclear equipment and materials possible, monitoring the transfer of nuclear technology to developing countries as well as between industrial countries. Canada is committed to non-proliferation and IAEA safeguards. Canadian non-proliferation policy is among the strictest in the world, even though opportunities have been lost to sell Canadian technology abroad as a result
International Nuclear Information System (INIS)
Klepatsky, Alexander B.
2002-01-01
The review of the ISTC (The International Science and Technology Center) Programs and activities including Science Project Program, Partner Program, Seminar Program and others is presented. Project funding by technology area, by funding Parties, by CIS (Commonwealth of Independent States) States etc. is demonstrated with emphasis on projects in the field of nuclear data. The ISTC opportunities for international cooperation in the fields of nuclear data measurements, calculation, evaluation and dissemination are discussed. (author)
2nd International Conference on Education and Educational Technology (EET 2011)
Education and Educational Technology
2012-01-01
This volume includes extended and revised versions of a set of selected papers from the 2011 2nd International Conference on Education and Educational Technology (EET 2011) held in Chengdu, China, October 1-2, 2011. The mission of EET 2011 Volume 1 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of education and educational technology to disseminate their latest research results and exchange views on the future research directions of these fields. 130 related topic papers were selected into this volume. All the papers were reviewed by 2 program committee members and selected by the volume editor Prof. Yuanzhi Wang, from Intelligent Information Technology Application Research Association, Hong Kong. The conference will bring together leading researchers, engineers and scientists in the domain of interest. We hope every participant can have a good opportunity to exchange their research ideas and results and to discuss the state of the art in th...
Mathes, Tim; Jacobs, Esther; Morfeld, Jana-Carina; Pieper, Dawid
2013-09-30
The number of Health Technology Assessment (HTA) agencies increases. One component of HTAs are economic aspects. To incorporate economic aspects commonly economic evaluations are performed. A convergence of recommendations for methods of health economic evaluations between international HTA agencies would facilitate the adaption of results to different settings and avoid unnecessary expense. A first step in this direction is a detailed analysis of existing similarities and differences in recommendations to identify potential for harmonization. The objective is to provide an overview and comparison of the methodological recommendations of international HTA agencies for economic evaluations. The webpages of 127 international HTA agencies were searched for guidelines containing recommendations on methods for the preparation of economic evaluations. Additionally, the HTA agencies were requested information on methods for economic evaluations. Recommendations of the included guidelines were extracted in standardized tables according to 13 methodological aspects. All process steps were performed independently by two reviewers. Finally 25 publications of 14 HTA agencies were included in the analysis. Methods for economic evaluations vary widely. The greatest accordance could be found for the type of analysis and comparator. Cost-utility-analyses or cost-effectiveness-analyses are recommended. The comparator should continuously be usual care. Again the greatest differences were shown in the recommendations on the measurement/sources of effects, discounting and in the analysis of sensitivity. The main difference regarding effects is the focus either on efficacy or effectiveness. Recommended discounting rates range from 1.5%-5% for effects and 3%-5% for costs whereby it is mostly recommended to use the same rate for costs and effects. With respect to the analysis of sensitivity the main difference is that oftentimes the probabilistic or deterministic approach is recommended
Internal Branding: Using Performance Technology To Create an Organization Focused on Customer Value.
Tosti, Donald T.; Stotz, Rodger
2000-01-01
Presents a performance technology approach to revenue enhancement, with the goal of improving customer retention through building customer value. Topics include internal branding, a way to make sure that what the company delivers matches what's promised in the advertising; product versus service brands; and customer satisfaction, including…
International Conference on Information Science and Applications
Joukov, Nikolai
2016-01-01
This book contains selected papers from the 7th International Conference on Information Science and Applications (ICISA 2016) and provides a snapshot of the latest issues encountered in technical convergence and convergences of security technology. It explores how information science is core to most current research, industrial and commercial activities and consists of contributions covering topics including Ubiquitous Computing, Networks and Information Systems, Multimedia and Visualization, Middleware and Operating Systems, Security and Privacy, Data Mining and Artificial Intelligence, Software Engineering, and Web Technology. The contributions describe the most recent developments in information technology and ideas, applications and problems related to technology convergence, illustrated through case studies, and reviews converging existing security techniques. Through this volume, readers will gain an understanding of the current state-of-the-art information strategies and technologies of convergence sec...
DEVELOPING A TECHNOLOGY-BASED BUSINESS STRATEGY FOR THE INTERNATIONAL BUSINESS OF TELKOM SA
Directory of Open Access Journals (Sweden)
M. John
2012-01-01
Full Text Available
ENGLISH ABSTRACT: This study was aimed at developing a technology-based business strategy for Telkom’s international business. Deregulation, competition and demand for converging voice, data and video in the telecommunication market were the driving forces behind this study. Without a proper strategy, Telkom will not be able to withstand the new competition. As the initial step in strategy formulation, Telkom’s strategic goals were identified. A SWOT analysis was conducted and a strategy formulation map was developed. A technology balance sheet and S-curve models were developed to analyse the current products and technologies. It become evident through the research that there is a high potential for business expansion into Africa and Telkom has sufficient capabilities to support this. The implementation of voice over Internet protocol technology will enable Telkom to deliver international services at competitive rates. The study concluded by developing a technology strategy for Telkom’s international business. Recommendations are put forward and future research gaps are identified.
AFRIKAANSE OPSOMMING: Die doel van hierdie studie was om ‘n tegnologie-gebaseerde besigheidstrategie vir Telkom se internasionale besigheid te ontwikkel. Deregulering, mededinging en die vraag na konvergensie van stem, data en video in die telekommunikasiemark was die dryfkragte agter hierdie studie. Sonder ‘n behoorlike strategie sal Telkom nie teen die nuwe mededinging kan staande bly nie. As eerste stap in die formulering van ‘n strategie, is Telkom se doelwitte geïdentifiseer. ‘n SWOT-analise is uitgevoer en ‘n strategieformuleringskaart is ontwikkel. ‘n Tegnologiebalansstaat en S-krommemodelle is ontwikkel om die bestaande produkte en tegnologieë te ontleed. Hierdie navorsing het aangetoon dat daar ‘n hoë potensiaal vir uitbreiding van Telkom se besigheid in Afrika bestaan en dat Telkom genoegsame vermoëns besit om dit te
FY-95 technology catalog. Technology development for buried waste remediation
International Nuclear Information System (INIS)
1995-01-01
The US Department of Energy's (DOE) Buried Waste Integrated Demonstration (BWID) program, which is now part of the Landfill Stabilization Focus Area (LSFA), supports applied research, development, demonstration, and evaluation of a multitude of advanced technologies dealing with underground radioactive and hazardous waste remediation. These innovative technologies are being developed as part of integrated comprehensive remediation systems for the effective and efficient remediation of buried waste sites throughout the DOE complex. These efforts are identified and coordinated in support of Environmental Restoration (EM-40) and Waste Management (EM-30) needs and objectives. Sponsored by the DOE Office of Technology Development (EM-50), BWID and LSFA work with universities and private industry to develop technologies that are being transferred to the private sector for use nationally and internationally. This report contains the details of the purpose, logic, and methodology used to develop and demonstrate DOE buried waste remediation technologies. It also provides a catalog of technologies and capabilities with development status for potential users. Past FY-92 through FY-94 technology testing, field trials, and demonstrations are summarized. Continuing and new FY-95 technology demonstrations also are described
FY-95 technology catalog. Technology development for buried waste remediation
Energy Technology Data Exchange (ETDEWEB)
NONE
1995-10-01
The US Department of Energy`s (DOE) Buried Waste Integrated Demonstration (BWID) program, which is now part of the Landfill Stabilization Focus Area (LSFA), supports applied research, development, demonstration, and evaluation of a multitude of advanced technologies dealing with underground radioactive and hazardous waste remediation. These innovative technologies are being developed as part of integrated comprehensive remediation systems for the effective and efficient remediation of buried waste sites throughout the DOE complex. These efforts are identified and coordinated in support of Environmental Restoration (EM-40) and Waste Management (EM-30) needs and objectives. Sponsored by the DOE Office of Technology Development (EM-50), BWID and LSFA work with universities and private industry to develop technologies that are being transferred to the private sector for use nationally and internationally. This report contains the details of the purpose, logic, and methodology used to develop and demonstrate DOE buried waste remediation technologies. It also provides a catalog of technologies and capabilities with development status for potential users. Past FY-92 through FY-94 technology testing, field trials, and demonstrations are summarized. Continuing and new FY-95 technology demonstrations also are described.
A study on the international nuclear Co-operation and the nuclear technology self-reliance strategy
International Nuclear Information System (INIS)
Kim, Hwa Sup
1993-02-01
To setup a basement for the national nuclear technology strategy, the reorganization of the world structure and the environmental issues are analyzed. And with regards to the self-reliance of nuclear technology, the method for the settlement of the national nuclear infrastructure and the method to strengthen our role in international nuclear community through the co-operation with IAEA is suggested. Also the status and strategy of major nuclear pushing countries are investigated. And followed by this, national nuclear technology status and strategy are analyzed. (Author)
Energy Technology Data Exchange (ETDEWEB)
Nakamura, Hiroo; Ida, Mizuho; Sugimoto, Masayoshi; Takeuchi, Hiroshi; Yutani, Toshiaki (eds.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment
2002-03-01
Activities of International Fusion Materials Irradiation Facility (IFMIF) have been performed under an IEA collaboration since 1995. IFMIF is an accelerator-based deuteron (D{sup +})-lithium (Li) neutron source designed to produce an intense neutron field (2 MW/m{sup 2}, 20 dpa/year for Fe) in a volume of 500 cm{sup 3} for testing candidate fusion materials. In 2000, a 3 year Key Element technology Phase (KEP) of IFMIF was started to reduce the key technology risk factors. This interim report summarizes the KEP activities until mid 2001 in the major project work-breakdown areas of accelerator, target, test facilities and design integration. (author)
Pandit, V. S.; Pal, Gautam
2012-11-01
on Vacuum and related topics are published. NIRVAT, news, announcements, and reports are the other features of the Bulletin. The articles in the Bulletin are internationally abstracted. The Bulletin is distributed free to all members of the society. The society also publishes the proceedings of National, International Symposia/Seminars, manuals, lecture notes etc. It has published 'Vacuum Directory' containing very useful information on vacuum technology and it is in the process of updating this. The IVS has also set up its own website (http://www.ivsnet.org) in January 2002. The website contains information about IVS, lists of EC members, events and news, abstracts of articles published in the Bulletin of Indian Vacuum Society, utilities, technical data, announcements, reports, membership and other forms including advertisements. Our Society is a member society of the International Union of Vacuum Science, Techniques and Applications (IUVSTA) and many IVS members are nominated in its various committees since 1970. In 1983, IVS conducted an International Symposium on Vacuum Technology and Nuclear Applications in BARC, Mumbai under the sponsorship of IUVSTA. In 1987, IVS arranged, the Triennial International Conference on Thin Films in New Delhi, where more than 200 foreign delegates participated. IVS also hosted the IUVSTA Executive Council Meeting along with the conference. The society organized yet again an International Conference on Vacuum Science and Technology (IVS-2007) during 28-30 November 2007 at TIFR, Colaba Camups, Mumbai. IVS organizes the prestigious Professor Balakrishnan Memorial Lecture in memory of its founder vice-president. Leading scientists in the field from India and abroad are invited to deliver the talk. So far 24 lectures have been held in this series. IVS has instituted the 'IVS- Professor D Y Phadke Memorial Prize' in memory of our founder President the late Professor D Y Phadke in the University of Mumbai. The prize is given every year to
Srivastava, HM; Venturino, Ezio; Resch, Michael; Gupta, Vijay
2016-01-01
The book discusses important results in modern mathematical models and high performance computing, such as applied operations research, simulation of operations, statistical modeling and applications, invisibility regions and regular meta-materials, unmanned vehicles, modern radar techniques/SAR imaging, satellite remote sensing, coding, and robotic systems. Furthermore, it is valuable as a reference work and as a basis for further study and research. All contributing authors are respected academicians, scientists and researchers from around the globe. All the papers were presented at the international conference on Modern Mathematical Methods and High Performance Computing in Science & Technology (M3HPCST 2015), held at Raj Kumar Goel Institute of Technology, Ghaziabad, India, from 27–29 December 2015, and peer-reviewed by international experts. The conference provided an exceptional platform for leading researchers, academicians, developers, engineers and technocrats from a broad range of disciplines ...
36th International Conference on Information Systems Architecture and Technology
Grzech, Adam; Świątek, Jerzy; Wilimowska, Zofia
2016-01-01
This four volume set of books constitutes the proceedings of the 36th International Conference Information Systems Architecture and Technology 2015, or ISAT 2015 for short, held on September 20–22, 2015 in Karpacz, Poland. The conference was organized by the Computer Science and Management Systems Departments, Faculty of Computer Science and Management, Wroclaw University of Technology, Poland. The papers included in the proceedings have been subject to a thorough review process by highly qualified peer reviewers. The accepted papers have been grouped into four parts: Part I—addressing topics including, but not limited to, systems analysis and modeling, methods for managing complex planning environment and insights from Big Data research projects. Part II—discoursing about topics including, but not limited to, Web systems, computer networks, distributed computing, and multi-agent systems and Internet of Things. Part III—discussing topics including, but not limited to, mobile and Service Oriented Archi...
Long life technology work at Rockwell International Space Division
Huzel, D. K.
1974-01-01
This paper presents highlights of long-life technology oriented work performed at the Space Division of Rockwell International Corporation under contract to NASA. This effort included evaluation of Saturn V launch vehicle mechanical and electromechanical components for potential extended life capabilities, endurance tests, and accelerated aging experiments. A major aspect was evaluation of the components at the subassembly level (i.e., at the interface between moving surfaces) through in-depth wear analyses and assessments. Although some of this work is still in progress, preliminary conclusions are drawn and presented, together with the rationale for each. The paper concludes with a summary of the effort still remaining.
Minutes of the 23rd meeting of the International Nuclear Data Committee
International Nuclear Information System (INIS)
Nichols, A.L.
2000-06-01
The document contains the reports of the two working groups on 'Nuclear Data Dissemination and Co-ordination' and 'Nuclear Data Technology Transfer and Training', the full report of the 23rd meeting of the International Nuclear Data Committee, and seven appendices
Technology round and management of technology
International Nuclear Information System (INIS)
Park, Yong Tae
1994-04-01
This book deals with beginning of technology round with background of it, change of scientific technique paradigm with economy, management and policy, change of international political environment globalization of technical and economic environment, formation of strategic alliance, intensifying regionalism, new GATT system, UR and technology round, new international technique regulation and technology round of OECD, feature and meaning of technology round, assignment and scientific technique of Korea, past and present of scientific technology in Korea, correspondence for technology round.
Contemporary food technology and its impact on cuisine.
Lupien, John R; Lin, Ding Xiao
2004-01-01
This article contains a general review of current food technologies and their effect on the quality and safety of foods. The uses of these technologies in the context of current and projected world population, urbanization prevention of food losses, preservation and trade of foods, domestically and internationally are briefly reviewed. Technologies discussed are related to food storage, refrigeration, frozen foods, milling and baking, canning, pickling, extrusion processes, fermentation, and to foods and food ingredients such as fruits and vegetables, animal products, fat and oils, canned products, and food additives.
Energy Technology Data Exchange (ETDEWEB)
NONE
2007-04-15
This is the second revision of the ETDE/INIS Joint Thesaurus, including all updates up to September 2006. It contains 21 147 valid descriptors and 9 114 forbidden terms. The Joint Thesaurus contains the controlled terminology for indexing all information within the subject scopes of the International Nuclear Information System (INIS) and the Energy Technology Data Exchange (ETDE). The terminology is intended for use in subject descriptions for input or retrieval of information in these systems. The thesaurus is a terminological control device used in translating from the natural language of documents, indexers or users into a more constrained system language It is also a controlled and dynamic vocabulary of semantically and generically related terms which covers a specific domain of knowledge. The basic terminology in this thesaurus goes back to the 1969 edition of the EURATOM Thesaurus. The structure subsequently given to that terminology was the result of a systematic study performed by INIS subject specialists. Further expansion of the thesaurus terminology was done by ETDE to incorporate information on all forms of energy. The ETDE/INIS Joint Thesaurus is the result of continued editing, carried out in parallel to the processing of the INIS and ETDE databases. The domain of knowledge covered by the Joint Thesaurus includes physics (in particular, plasma physics, atomic and molecular physics, and especially nuclear and high-energy physics), chemistry, materials science, earth sciences, radiation biology, radioisotope effects and kinetics, applied life sciences, radiology and nuclear medicine, isotope and radiation source technology, radiation protection, radiation applications, engineering, instrumentation, fossil fuels, synthetic fuels, renewable energy sources, advanced energy systems, fission and fusion reactor technology, safeguards and inspection, waste management, environmental aspects of the production and consumption of energy from nuclear and non
Simplified compact containment BWR plant
International Nuclear Information System (INIS)
Heki, H.; Nakamaru, M.; Tsutagawa, M.; Hiraiwa, K.; Arai, K.; Hida, T.
2004-01-01
The reactor concept considered in this paper has a small power output, a compact containment and a simplified BWR configuration with comprehensive safety features. The Compact Containment Boiling Water Reactor (CCR), which is being developed with matured BWR technologies together with innovative systems/components, is expected to prove attractive in the world energy markets due to its flexibility in regard to both energy demands and site conditions, its high potential for reducing investment risk and its safety features facilitating public acceptance. The flexibility is achieved by CCR's small power output of 300 MWe class and capability of long operating cycle (refueling intervals). CCR is expected to be attractive from view point of investment due to its simplification/innovation in design such as natural circulation core cooling with the bottom located short core, internal upper entry control rod drives (CRDs) with ring-type dryers and simplified ECCS system with high pressure containment concept. The natural circulation core eliminates recirculation pumps and the maintenance of such pumps. The internal upper entry CRDs reduce the height of the reactor vessel (RPV) and consequently reduce the height of the primary containment vessel (PCV). The safety features mainly consist of large water inventory above the core without large penetration below the top of the core, passive cooling system by isolation condenser (IC), passive auto catalytic recombiner and in-vessel retention (IVR) capability. The large inventory increases the system response time in the case of design-base accidents, including loss of coolant accidents. The IC suppresses PCV pressure by steam condensation without any AC power. The recombiner decreases hydrogen concentration in the PCV in the case of a severe accident. Cooling the molten core inside the RPV if the core should be damaged by loss of core coolability could attain the IVR. The feasibility of CCR safety system has been confirmed by LOCA
Energy Technology Data Exchange (ETDEWEB)
NONE
2001-03-01
A workshop was held concerning technology transfer in the software of environmental technologies, for the purpose of contributing to CTI (Climate Technology Initiative), an international framework for dealing with technological problems in preventing climate change, with the results of the workshop compiled. The workshop was held for a period from September 10 to September 23, 2000; the contents were, for example, an outline on energy conservation, introduction to cleaner production, lectures on related technologies, seminars on actual cases including case studies, factory tours, etc., and discussion session by all participants; and, in general, the workshop was conducted so as to promote understanding on cleaner production and energy conservation. Four lecturers were invited to this workshop from an international organization, U.S. and Japan. In addition, two staff members and two technical consultants from ICETT (the International Center for Environmental Technology Transfer) gave lectures and advice as technology advisers. Three environmental specialists were invited from each of the five countries, China, Indonesia, Thailand, Philippines, and Vietnam. (NEDO)
The Environmental Technology Verification report discusses the technology and performance of the DriPak 90/95% air filter for dust and bioaerosol filtration manufactured by AAF International. The pressure drop across the filter was 104 Pa clean and 348 Pa dust loaded, and the fil...
Energy Technology Data Exchange (ETDEWEB)
Smith, S.A.; Davis, L.J.; Garrett, B.A.
1987-05-01
The refrigerated trailer and container segments of the transportation industry are evaluated as potential entry markets for a proposed absorption refrigeration technology. To perform this analysis the existing transportation refrigeration industry is characterized; this includes a description of the current refrigeration technology, rating systems, equipment manufacturers, maintenance requirements, and sales trends. This information indicates that the current transportation refrigeration industry is composed of two major competitors, Thermo King and Carrier. In addition, it has low profit potential, some barriers to entry and low growth potential. Data are also presented that characterize the transportation refrigeration consumers, specifically, major groups, market segmentation, consumer decision process, and buying criteria. This consumer information indicates that the majority of refrigerated trailer consumers are private carriers, and that the majority of refrigerated container consumers are shipping companies. Also, these consumers are primarily interested in buying reliable equipment at a low price, and are quite satisfied with existing refrigeration equipment.
International bulletin on atomic and molecular data for fusion. No. 59
International Nuclear Information System (INIS)
Stephens, J.A.; Bannister, M.E.; Fuhr, J.; Gilbody, H.B.
2001-03-01
The International Bulletin on Atomic and Molecular Data for Fusion is prepared by the Atomic and Molecular Data Unit of the International Atomic Energy Agency. It is distributed free of charge by the IAEA to assist in the development of fusion research and technology. In part 1, the Atomic and Molecular Data Information System (AMDIS) is presented. In Part 2, the indexed papers are listed separately for structure and spectra, atomic and molecular collisions and surface interactions. Part 3 contains all the bibliographic data for both the indexed and non-indexed references. Finally, the Author Index (part 4) refers to the bibliographic references contained in part 3
International bulletin on atomic and molecular data for fusion. No. 58
International Nuclear Information System (INIS)
Stephens, J.; Bannister, M.E.; Fuhr, J.; Gilbody, H.B.
2000-06-01
The International Bulletin on Atomic and Molecular Data for Fusion is prepared by the Atomic and Molecular Data Unit of the International Atomic Energy Agency. It is distributed free of charge by the IAEA to assist in the development of fusion research and technology. In part 1, the Atomic and Molecular Data Information System (AMDIS) is presented. In Part 2, the indexed papers are listed separately for structure and spectra, atomic and molecular collisions and surface interactions. Part 3 contains all the bibliographic data for both the indexed and non-indexed references. Finally, the Author Index (part 4) refers to the bibliographic references contained in part 3
PREFACE: 2nd International Conference on Innovative Materials, Structures and Technologies
Ručevskis, Sandris
2015-11-01
The 2nd International Conference on Innovative Materials, Structures and Technologies (IMST 2015) took place in Riga, Latvia from 30th September - 2nd October, 2015. The first event of the conference series, dedicated to the 150th anniversary of the Faculty of Civil Engineering of Riga Technical University, was held in 2013. Following the established tradition, the aim of the conference was to promote and discuss the latest results of industrial and academic research carried out in the following engineering fields: analysis and design of advanced structures and buildings; innovative, ecological and energy efficient building materials; maintenance, inspection and monitoring methods; construction technologies; structural management; sustainable and safe transport infrastructure; and geomatics and geotechnics. The conference provided an excellent opportunity for leading researchers, representatives of the industrial community, engineers, managers and students to share the latest achievements, discuss recent advances and highlight the current challenges. IMST 2015 attracted over 120 scientists from 24 countries. After rigorous reviewing, over 80 technical papers were accepted for publication in the conference proceedings. On behalf of the organizing committee I would like to thank all the speakers, authors, session chairs and reviewers for their efficient and timely effort. The 2nd International Conference on Innovative Materials, Structures and Technologies was organized by the Faculty of Civil Engineering of Riga Technical University with the support of the Latvia State Research Programme under the grant agreement "INNOVATIVE MATERIALS AND SMART TECHNOLOGIES FOR ENVIRONMENTAL SAFETY, IMATEH". I would like to express sincere gratitude to Juris Smirnovs, Dean of the Faculty of Civil Engineering, and Andris Chate, manager of the Latvia State Research Programme. Finally, I would like to thank all those who helped to make this event happen. Special thanks go to Diana
Krishna Prasad K
2018-01-01
This book contains research articles related to Mobile Wireless Communication Technologies 4G and 5G Technologies. This book also contains applications of 4G and 5G Technologies in Online Banking and Online Learning. These papers published already in peer-reviewed International Journals. This Book has written with an intention to get all papers together under one roof, which will benefit all the researchers of related areas.
Structural capacity assessment of WWER-1000 MW reactor containment. Progress report
International Nuclear Information System (INIS)
Jordanov, M.
1999-01-01
The objective of the project is to provide assessment of the structural behaviour and safety capacity of the WWER-1000 MW Reactor Building Containment at Kozloduy NPP under critical combination of loads according to the current international requirements. The analysis is focused on a realistic assessment of the Containment taking into account the non-linear shell behaviour of the pre-stressed reinforced concrete structure. Previous assessments of the status of pre stressing cables pointed out that the efficiency of the Containment as a final defence barrier for internal and external events depends on their reliability. Due to this, the experimental data obtained from embedded sensors (gauges) at pre-stressed shell structure is to be compared with the results from analytical investigations. The reliability of the WWER-1000 MW accident prevention system is under evaluation in the project. The Soviet standard design WWER-1000 MW type units installed in Kozloduy NPP were originally designed for a Safe Shutdown Earthquake (SSE) with a peak ground acceleration (PGA) of 0.1g. The new site seismicity studies revealed that the seismic hazard for the site significantly exceeds the originally estimated and a Review Level Earthquake (RLE) anchored to PGA=0.20g was proposed for re-assessment of the structures and equipment at Kozloduy NPP. The scope of the study is a re-assessment of the Containment structure under critical combination of loads according to the current safety and reliability requirements, including comparison between the Russian design requirements and the international regulations. Additionally, an investigation of the pre-stressing technology and the annual control of the cables' pre-stressing of the Containment is to be made. The crane influence on the dynamic behaviour of the Containment will be done as well as a study of the integrity of the Containment as a final defence barrier
Present status and expectations of international cooperation on nuclear technology in Taiwan
International Nuclear Information System (INIS)
Wang, Mann-Tchao
1992-01-01
The development and international cooperation on nuclear energy in Taiwan started in the early fifties. As one of original signatories for the open-quotes Non-proliferation Treatyclose quotes in the United Nations, the development and international cooperation programs has been positioned, ever since, in the peaceful applications of this new found technology. The first establishment of nuclear facility in Taiwan was an open pool research reactor for educational and research purposes at the National Tsing-Hua University in 1956. Subsequently, a heavy water moderated research reactor, TRR, and 6 units of thermal nuclear power reactors were constructed. Peaceful applications of nuclear energy, in areas of generations, medical diagnosis and treatments, agricultural and industrial services were developed step by step
Xu, Linli; Tian, Wenya
2012-01-01
The 2012 International Conference on Emerging Computation and Information teChnologies for Education (ECICE 2012) was held on Jan. 15-16, 2012, Hangzhou, China. The main results of the conference are presented in this proceedings book of carefully reviewed and accepted paper addressing the hottest issues in emerging computation and information technologies used for education. The volume covers a wide series of topics in the area, including Computer-Assisted Education, Educational Information Systems, Web-based Learning, etc.
International Nuclear Information System (INIS)
Singh, R.; Messick, L.J.
1989-01-01
This book contains the proceedings of the first international conference on indium phosphide and related materials for advanced electronic and optical devices. Topics covered include: Growth and characterization of bulk and epitaxial films, Passivation technology, Processing technology, High speed optoelectronic integrated circuits, and Solar cells
International Nuclear Information System (INIS)
Castro, R.G.; Elliott, K.E.; Hollis, K.J.; Watson, R.D.
1999-01-01
Over the past five years, four international parties, which include the European Communities, Japan, the Russian Federation and the United States, have been collaborating on the design and development of the International Thermonuclear Experimental Reactor (ITER), the next generation magnetic fusion energy device. During the ITER Engineering Design Activity (EDA), beryllium plasma spray technology was investigated by Los Alamos National Laboratory as a method for fabricating and repairing and the beryllium first wall surface of the ITER tokamak. Significant progress has been made in developing beryllium plasma spraying technology for this application. Information will be presented on the research performed to improve the thermal properties of plasma sprayed beryllium coatings and a method that was developed for cleaning and preparing the surface of beryllium prior to depositing plasma sprayed beryllium coatings. Results of high heat flux testing of the beryllium coatings using electron beam simulated ITER conditions will also be presented
International Colloquium on Sports Science, Exercise, Engineering and Technology 2014
Ismail, Shariman; Sulaiman, Norasrudin
2014-01-01
The proceeding is a collection of research papers presented at the International Colloquium on Sports Science, Exercise, Engineering and Technology (ICoSSEET2014), a conference dedicated to address the challenges in the areas of sports science, exercise, sports engineering and technology including other areas of sports, thereby presenting a consolidated view to the interested researchers in the aforesaid fields. The goal of this conference was to bring together researchers and practitioners from academia and industry to focus on the scope of the conference and establishing new collaborations in these areas. The topics of interest are as follows but are not limited to:1. Sports and Exercise Science • Sports Nutrition • Sports Biomechanics • Strength and Conditioning • Motor Learning and Control • Sports Psychology • Sports Coaching • Sports and Exercise Physiology • Sports Medicine and Athletic Trainer • Fitness and Wellness • Exercise Rehabilitation • Adapted Physical Activity...
2016 37th International Conference Information Systems Architecture and Technology
Grzech, Adam; Świątek, Jerzy; Wilimowska, Zofia
2017-01-01
This four volume set of books constitutes the proceedings of the 2016 37th International Conference Information Systems Architecture and Technology (ISAT), or ISAT 2016 for short, held on September 18–20, 2016 in Karpacz, Poland. The conference was organized by the Department of Management Systems and the Department of Computer Science, Wrocław University of Science and Technology, Poland. The papers included in the proceedings have been subject to a thorough review process by highly qualified peer reviewers. The accepted papers have been grouped into four parts: Part I—addressing topics including, but not limited to, systems analysis and modeling, methods for managing complex planning environment and insights from Big Data research projects. Part II—discoursing about topics including, but not limited to, Web systems, computer networks, distributed computing, and mulit-agent systems and Internet of Things. Part III—discussing topics including, but not limited to, mobile and Service Oriented Architect...
8th International School of Fusion Reactor Technology "Ettore Majorana"
Leotta, G G; Muon-catalyzed fusion and fusion with polarized nuclei
1988-01-01
The International School of Fusion Reactor Technology started its courses 15 years ago and since then has mantained a biennial pace. Generally, each course has developed the subject which was announced in advance at the closing of the previous course. The subject to which the present proceedings refer was chosen in violation of that rule so as to satisfy the recent and diffuse interest in cold fusion among the main European laboratories involved in controlled thermonuclear research (CTR). In the second half of 1986 we started to prepare a workshop aimed at assessing the state of the art and possibly of the perspectives of muon- catalyzed fusion. Research in this field has recently produced exciting experimental results open to important practical applications. We thought it worthwhile to consider also the beneficial effects and problems of the polarization ofthe nuclei in both cold and thermonuclear fusion. In preparing the 8th Course on Fusion Reactor Technology, it was necessary to abandon the tradi...
International Nuclear Information System (INIS)
Vormelker, P.
1999-01-01
The Materials Consultation Group of SRTC has completed an internal corrosion analysis of the Model 9975 packaging assembly containing either Pu or PuO2 for storage in K Reactor under ambient conditions for a period of 12 years. The 12-year storage period includes two years for shipping and up to ten years for storage
Wijaya, Wahyu; Van der Meeren, Paul; Dewettinck, Koen; Patel, Ashok R
2018-04-25
We report, for the first time, the fabrication of oleofilms (containing more than 97 wt% edible liquid oil) using high internal phase emulsions (with oil volume fraction φoil = 0.82) as templates. Advanced microscopy studies revealed an interesting microstructure of these films where jammed oil droplets were embedded in a dried matrix of biopolymeric complexes.
Petrushin, V., Ed.; Dovgiallo, A., Ed.
The conference reported in this document provides a meeting place for researchers from around the world, where the emphasis is on new ideas connected to computer technologies in education. This volume contains 140 extended abstracts selected by the program committee and organized into the following categories: (1) educational informational…
EDITORIAL: Molecular Imaging Technology
Asai, Keisuke; Okamoto, Koji
2006-06-01
'Molecular Imaging Technology' focuses on image-based techniques using nanoscale molecules as sensor probes to measure spatial variations of various species (molecular oxygen, singlet oxygen, carbon dioxide, nitric monoxide, etc) and physical properties (pressure, temperature, skin friction, velocity, mechanical stress, etc). This special feature, starting on page 1237, contains selected papers from The International Workshop on Molecular Imaging for Interdisciplinary Research, sponsored by the Ministry of Education, Culture, Sports, Science and Technology (MEXT) in Japan, which was held at the Sendai Mediatheque, Sendai, Japan, on 8 9 November 2004. The workshop was held as a sequel to the MOSAIC International Workshop that was held in Tokyo in 2003, to summarize the outcome of the 'MOSAIC Project', a five-year interdisciplinary project supported by Techno-Infrastructure Program, the Special Coordination Fund for Promotion of Science Technology to develop molecular sensor technology for aero-thermodynamic research. The workshop focused on molecular imaging technology and its applications to interdisciplinary research areas. More than 110 people attended this workshop from various research fields such as aerospace engineering, automotive engineering, radiotechnology, fluid dynamics, bio-science/engineering and medical engineering. The purpose of this workshop is to stimulate intermixing of these interdisciplinary fields for further development of molecular sensor and imaging technology. It is our pleasure to publish the seven papers selected from our workshop as a special feature in Measurement and Science Technology. We will be happy if this issue inspires people to explore the future direction of molecular imaging technology for interdisciplinary research.
International Nuclear Information System (INIS)
Carvalho, E.A. de
2005-01-01
This paper evaluates the stress concentration factors for an internally pressurized cylinder containing a radial U-notch along its length. This work studies the cases where the external to internal radius ratio (Ψ) is equal to 1.26, 1.52, 2.00, and 3.00 and the notch radius to internal radius ratio (Φ) is fixed and equal to 0.026. The U-notch depth varies from 0.1 to 0.6 of the wall thickness. Results are also presented for a fixed size semi-circular notch. Hoop stresses at the external wall are presented, showing regions where the stress matches the nominal one and the favourable places to install strain sensors. The finite element method is used to determine the stress concentration factors (K t ) for the above described situations and for a special case where a varying semi-circular notch is present with Ψ=3.00. This notch depth varies from 0.013 to 0.3 of the wall thickness. It is pointed out that even relatively small notches introduce large stress concentrations and disrupt the hoop stress distribution all over the cross section. Results are also compared to an example found in the literature for semi-circular notches and K t curves for both cases present the same shape
5. IEA International workshop on beryllium technology for fusion. Book of abstracts
Energy Technology Data Exchange (ETDEWEB)
NONE
2001-07-01
The collection includes the abstracts of reports presented to the 5-th IEA international workshop on beryllium technology for fusion. The themes of reports are as follows: status of beryllium technology for fusion in Russia; manufacturing and testing of Be armoured first wall mock-up for ITER; development of the process of diffusion welding of metals stainless steel-copper-beryllium into a single composite; some features of beryllium-laser beam interaction; the effect of irradiation dose on tritium and helium release from neutron irradiated beryllium; thermal properties of neutron irradiated Be{sub 12}Ti. The results of investigating the mechanical properties variation and swelling of beryllium under high temperature neutron irradiation are presented.
5. IEA International workshop on beryllium technology for fusion. Book of abstracts
International Nuclear Information System (INIS)
2001-01-01
The collection includes the abstracts of reports presented to the 5-th IEA international workshop on beryllium technology for fusion. The themes of reports are as follows: status of beryllium technology for fusion in Russia; manufacturing and testing of Be armoured first wall mock-up for ITER; development of the process of diffusion welding of metals stainless steel-copper-beryllium into a single composite; some features of beryllium-laser beam interaction; the effect of irradiation dose on tritium and helium release from neutron irradiated beryllium; thermal properties of neutron irradiated Be 12 Ti. The results of investigating the mechanical properties variation and swelling of beryllium under high temperature neutron irradiation are presented [ru
Pan, Yi; Yi, Gangman; Loia, Vincenzo
2017-01-01
This book presents the combined proceedings of the 8th International Conference on Computer Science and its Applications (CSA-16) and the 11st International Conference on Ubiquitous Information Technologies and Applications (CUTE 2016), both held in Bangkok, Thailand, December 19 - 21, 2016. The aim of these two meetings was to promote discussion and interaction among academics, researchers and professionals in the field of ubiquitous computing technologies. These proceedings reflect the state-of-the-art in the development of computational methods, involving theory, algorithm, numerical simulation, error and uncertainty analysis and novel application of new processing techniques in engineering, science, and other disciplines related to ubiquitous computing.
Self-contained pipe cutting shear. Innovative technology summary report
International Nuclear Information System (INIS)
1998-11-01
The US Department of Energy (DO) is in the process of decontaminating and decommissioning (D and D) many of its nuclear facilities throughout the country. Facilities have to be dismantled and demolition waste must be sized into manageable pieces for handling and disposal. Typically, the facilities undergoing D and D are contaminated, either chemically, radiologically, or both. In its D and D work, the DOE was in need of a tool capable of cutting steel and stainless steel pipe up to 6.4 cm in diameter. The self-contained pipe cutting shear was developed by Lukas Hydraulic GmbH and Co. KG to cut pipes up to 6.4 cm (2.5 in.) in diameter. This tool is a portable, hand-held hydraulic shear that is powered by a built-in rechargeable battery or a portable auxiliary rechargeable battery. Adding to its portability, it contains no hydraulic fluid lines or electrical cords, making it useful in congested areas or in areas with no power. Both curved and straight blades can be attached, making it adaptable to a variety of conditions. This tool is easy to set up, operates quietly, and cuts through pipes quickly. It is especially useful on contaminated pipes, as it crimps the ends while cutting and produces no residual cuttings. This shear is a valuable alternative to baseline technologies such as portable band saws, electric hacksaws, and other hydraulic shears. Costs using the innovative shear for cutting 2.5 cm (1-in.) pipe, for example, are comparable to costs using a conventional shear, approximately 80% of portable bandsaw costs and half of electric hacksaw costs
Third international spent fuel storage technology symposium/workshop: proceedings. Volume 2
International Nuclear Information System (INIS)
1986-01-01
The scope of this meeting comprised dry storage and rod consolidation, emphasizing programs on water reactor fuel with zirconium alloy cladding. Volume 2 contains the papers from the poster session and workshops that were conducted during the meeting. There were 18 poster presentations. Four workshops were held: Fuel Integrity; Storage System Modeling and Analysis; Rod Consolidation Technology; and System Integration and Optimization. Individual papers were processed for inclusion in the Energy Data Base
Third international spent fuel stroage technology symposium/workshop: proceedings. Volume 1
International Nuclear Information System (INIS)
1986-01-01
The scope of this meeting comprised dry storage and rod consolidation, emphasizing programs on water reactor fuel with zirconium alloy cladding. Volume 1 contains the symposium papers, together with the question/answer sessions that followed the presentations. Four sessions were held: Dry Storage System Tests, Demonstrations and Analyses; At-Reactor and Central Storage Facilities; Dry Storage Integrity; and Rod Consolidation Technology and Demonstrations. Individual papers were processed for inclusion in the Energy Data Base
Ordan, Julien Marius
2017-01-01
Meeting on a South-East European International Institute for Sustainable Technologies at CERN, organised by the Ministry of Science of Montenegro, followed by a lunch hosted by CERN Director-General F. Gianotti and a site visit to CMS counting room and S'Cool LAB.
Fusion research and technology records in INIS database
International Nuclear Information System (INIS)
Hillebrand, C.D.
1998-01-01
This article is a summary of a survey study ''''A survey on publications in Fusion Research and Technology. Science and Technology Indicators in Fusion R and T'''' by the same author on Fusion R and T records in the International Nuclear Information System (INIS) bibliographic database. In that study, for the first time, all scientometric and bibliometric information contained in a bibliographic database, using INIS records, is analyzed and quantified, specific to a selected field of science and technology. A variety of new science and technology indicators which can be used for evaluating research and development activities is also presented in that study that study
International MultiConference of Engineers and Computer Scientists 2016
Kim, Haeng; Huang, Xu; Castillo, Oscar
2017-01-01
This volume contains selected revised and extended research articles written by prominent researchers who participated in the International MultiConference of Engineers and Computer Scientists 2016, held in Hong Kong, 16-18 March 2016. Topics covered include engineering physics, communications systems, control theory, automation, engineering mathematics, scientific computing, electrical engineering, and industrial applications. The book showcases the tremendous advances in engineering technologies and applications, and also serves as an excellent reference work for researchers and graduate students working on engineering technologies, physical sciences and their applications.
Proceedings of the 12. international conference on mechatronics technology : ICMT 2008
Energy Technology Data Exchange (ETDEWEB)
NONE
2008-07-01
The theme for the 2008 international conference on mechatronics technology (ICMT) was the applications of mechatronics to natural resources to address the growing energy demands that the world will face in the future. It was attended by researchers, engineers and practitioners who presented the latest accomplishments, innovations and potential future directions in mechatronics and emerging application trends. The objective of ICMT 2008 was to facilitate dialogue among experts on issues relating to research and technological developments in mechatronics. The sessions of the conference were entitled: advanced mechatronic devices; bioengineering; human resource development and education; information and networking; mechatronic sensing and control; mechantronics and natural resources; micro-electro-mechanical systems and nano-electro-mechanical systems (MEMS-NEMS); and production systems. The conference featured 44 presentations, of which 4 have been catalogued separately for inclusion in this database. refs., tabs., figs.
Hur, Jung Won; Shannon, David; Wolf, Sara
2016-01-01
Various factors affecting technology integration have been identified, but little research has examined the relationships between factors, especially internal and external ones, and whether they directly or indirectly influenced each other. To fill this research gap, this study examined the significance and relationships of five factors…
Wymbs, Cliff; Kijne, Hugo
2003-01-01
This analysis extends the traditional marketing tradeoffs between richness (depth of knowledge) and reach (geographic area coverage) to the emerging technology-mediated education industry, and then specifically evaluates their effect on the teaching of international business. It asserts that interactive learning, particularly as it applies to team…