WorldWideScience

Sample records for internals irradiation conditions

  1. How to improve the irradiation conditions for the International Fusion Materials Irradiation Facility

    CERN Document Server

    Daum, E

    2000-01-01

    The accelerator-based intense D-Li neutron source International Fusion Materials Irradiation Facility (IFMIF) provides very suitable irradiation conditions for fusion materials development with the attractive option of accelerated irradiations. Investigations show that a neutron moderator made of tungsten and placed in the IFMIF test cell can further improve the irradiation conditions. The moderator softens the IFMIF neutron spectrum by enhancing the fraction of low energy neutrons. For displacement damage, the ratio of point defects to cascades is more DEMO relevant and for tritium production in Li-based breeding ceramic materials it leads to a preferred production via the sup 6 Li(n,t) sup 4 He channel as it occurs in a DEMO breeding blanket.

  2. Influence of geometrical parameters of the VVER-1000 reactor construction elements to internals irradiation conditions

    Directory of Open Access Journals (Sweden)

    О. M. Pugach

    2015-07-01

    Full Text Available Investigations to determine the influences of geometrical parameters of the calculational VVER-1000 reactor model to the results of internal irradiation condition determination are carried out. It is shown that the values of appropriate sensitivity matrix elements are not dependent on a height coordinate for any core level, but there is their azimuthal dependence. Maximum possible relative biases of neutron fluence due to inexact knowledge of internal geometrical parameters are obtained for the baffle and the barrel.

  3. International document on food irradiation

    International Nuclear Information System (INIS)

    1990-06-01

    This international document highlights the major issues related to the acceptance of irradiated food by consumers, governmental and intergovernmental activities, the control of the process, and trade. The conference recognized that: Food irradiation has the potential to reduce the incidence of foodborne diseases. It can reduce post-harvest food losses and make available a larger quantity and a wider variety of foodstuffs for consumers. Regulatory control by competent authorities is a necessary prerequisite for introduction of the process. International trade in irradiated foods would be facilitated by harmonization of national procedures based on internationally recognized standards for the control of food irradiation. Acceptance of irradiated food by the consumer is a vital factor in the successful commercialization of the irradiation process, and information dissemination can contribute to this acceptance

  4. Prospects of international trade in irradiated foods

    International Nuclear Information System (INIS)

    Loaharanu, P.

    1990-01-01

    Irradiation is gaining recognition as a physical process for reducing food losses, enhancing hygienic quality of food and facilitating food trade. At present, 36 countries have approved the use of irradiation for processing collectively over 40 food items either on an unconditional or restricted basis. Commercial use of irradiated foods and food ingredients is being carried out in 22 countries. Technology transfer on food irradiation is being intensified to local industry in different regions. Worldwide, a total of 40 commercial/demonstration irradiators available for treating foods have been or are being constructed. Acceptance and control of international trade in irradiated foods were discussed at the International Conference on the Acceptance, Control of and Trade in Irradiated Food, jointly convened by FAO, IAEA, WHO and ITC-UNCTAD/GATT in Geneva, Switzerland, 12-16 December 1988. An ''International Document on Food Irradiation'' was adopted by consensus at this Conference which will facilitate wider acceptance and control of international trade in irradiated foods. (author)

  5. International standards, Agreements and Policy of food Irradiation

    International Nuclear Information System (INIS)

    Roberts, P.B.

    1997-01-01

    There are few internationally recognised standards and agreements related to irradiated foods. Codex Alimentarius has its General standard for Irradiated foods. This sets standards for the production of irradiated foods that are safe and nutritionally adequate. Guidelines for the proper processing of foods by irradiation are covered in the Codex Recommended International Code of Practice for the Operation of Radiation Facilities Used for the Treatment of Food. For irradiation as a quarantine treatment for fruit, vegetables and other plants, the relevant international organization is the International Plant Protection Convention (IPPC), IPPC has no standards or guidelines for irradiation treatments. However, regional organizations within IPPC are moving towards recognition of irradiation as a technically viable and effective method of insect disinfestation. Especially notable are actions within the North American Plant Protection Organisation (NAPPO). NAPPO has endorsed a standard on the use of irradiation as a quarantine treatment. Other speakers have provided considerable detail on the Codex standard and on the situation with regard to quarantine issues. In this talk I will concentrate on irradiated foods as commodities that will be traded internationally in increasing amounts as we approach the next century. International trade is governed by bilateral arrangements. However, these arrangements should be consistent with the overarching multilateral agreements of the World trade Organization (WTO). The WTO Agreements do not refer directly to irradiation or irradiated foods. However, in this talk I will try to interpret the implications of the Agreements for trade in irradiated food. (Author)

  6. International standards, Agreements and Policy of food Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, P.B. [Industrial and Biological Section. Institute of Geological and Nuclear Science. P.O. Box 31. Lower Hutt (New Zealand)

    1997-12-31

    There are few internationally recognised standards and agreements related to irradiated foods. Codex Alimentarius has its General standard for Irradiated foods. This sets standards for the production of irradiated foods that are safe and nutritionally adequate. Guidelines for the proper processing of foods by irradiation are covered in the Codex Recommended International Code of Practice for the Operation of Radiation Facilities Used for the Treatment of Food. For irradiation as a quarantine treatment for fruit, vegetables and other plants, the relevant international organization is the International Plant Protection Convention (IPPC), IPPC has no standards or guidelines for irradiation treatments. However, regional organizations within IPPC are moving towards recognition of irradiation as a technically viable and effective method of insect disinfestation. Especially notable are actions within the North American Plant Protection Organisation (NAPPO). NAPPO has endorsed a standard on the use of irradiation as a quarantine treatment. Other speakers have provided considerable detail on the Codex standard and on the situation with regard to quarantine issues. In this talk I will concentrate on irradiated foods as commodities that will be traded internationally in increasing amounts as we approach the next century. International trade is governed by bilateral arrangements. However, these arrangements should be consistent with the overarching multilateral agreements of the World trade Organization (WTO). The WTO Agreements do not refer directly to irradiation or irradiated foods. However, in this talk I will try to interpret the implications of the Agreements for trade in irradiated food. (Author)

  7. International status of food irradiation

    International Nuclear Information System (INIS)

    Diehl, J.F.

    1983-01-01

    Radiation processing of foods has been studied for over 30 years. To a considerable extent this research was carried out in the framework of various international projects. After optimistic beginnings in the 1950s and long delays, caused by uncertainty about the health safety of foods so treated, food irradiation has now reached the stage of practical application in several countries. In order to prepare the way for world-wide accceptance of the new process, the Codex Alimentarius Commission has accepted an 'International General Standard for Irradiated Foods' and an 'International Code of Practice for the Operation of Irradiation Facilities Used for the Treatment of Foods'. Psychological barriers to a process associated with the word 'radiation' are still formidable; it appears, however, that acceptance by authorities, food industry and consumers continues to grow

  8. International acceptance of irradiated food. Legal aspects

    International Nuclear Information System (INIS)

    1979-01-01

    The three international organizations competent in the field of irradiation processing for the preservation of food (FAO, WHO, IAEA), convened, at the end of 1977, an Advisory Group to revise and update the recommendations of a similar group which met in early 1972. The Advisory Group considered how national regulations could be harmonized so as to facilitate the international movement of irradiated food. This publication contains the Report of the Advisory Group, which summarizes the considerations of the Group on regulatory control over the irradiation plant and irradiation of foods, and on assurances for comparability of control (international labelling and documentation). Annexes 1 to 6 are included in order to complete the relevant information on the legal aspects of this subject. They include a Draft General Standard for Irradiated Foods, a Draft Code of Practice for the Operation of Radiation Facilities Used for the Treatment of Foods, Recommendations of a Consultation Group on the Legal Aspects of Food Irradiation, a Listing of the Legislation on Food Irradiation Adopted in Member States (1971-1976), and Model Regulations for the Control of and Trade in Irradiated Food

  9. Food Irradiation. Proceedings of the International Symposium on Food Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1966-11-15

    For some years research has been done in several countries, with the object of contributing to the world's food supplies, on the application of nuclear methods to food preservation and processing. The importance of food preservation is of particular relevance in certain regions of the world where up to thirty per cent of harvested foodstuffs are being lost because of damage by animal pests and microorganisms. A series of international meetings have been held on this subject; the first, held in 1958 at Harwell, was followed by further meetings in 1960 in Paris and in 1961 in Brussels. The International Symposium on Food Irradiation organized by the International Atomic Energy Agency and the Food and Agriculture Organization of the United Nations through their Joint Division of Atomic Energy in Agriculture, and held at the Karlsruhe Nuclear Research Centre, Karlsruhe, from 6 to 10 June 1966, at the generous invitation of the Government of the Federal Republic of Germany, is the most recent of this series of meetings. It was held for the purpose of exchanging the most up-to-date results of research, of contributing towards co-operative efforts between Member States, and of stimulating trade in the international exchange of irradiated products between nations. Papers describing research over the past fourteen years were given by outstanding authorities; the results point to a breakthrough having been achieved in the use of ionizing radiation in food preservation, notwithstanding some problems still to be solved, such as overcoming changes in colour, flavour, odour or texture. The Symposium was attended by over 200 scientists from 25 countries and four international organizations. Sixty-nine papers were presented. It was shown that a wide variety of foodstuffs exist for which radiation could be used for three different purposes: to produce indefinitely stable products, to rid food of organisms that constitute health hazards, and to extend the normal shelf or market life

  10. Food Irradiation. Proceedings of the International Symposium on Food Irradiation

    International Nuclear Information System (INIS)

    1966-01-01

    For some years research has been done in several countries, with the object of contributing to the world's food supplies, on the application of nuclear methods to food preservation and processing. The importance of food preservation is of particular relevance in certain regions of the world where up to thirty per cent of harvested foodstuffs are being lost because of damage by animal pests and microorganisms. A series of international meetings have been held on this subject; the first, held in 1958 at Harwell, was followed by further meetings in 1960 in Paris and in 1961 in Brussels. The International Symposium on Food Irradiation organized by the International Atomic Energy Agency and the Food and Agriculture Organization of the United Nations through their Joint Division of Atomic Energy in Agriculture, and held at the Karlsruhe Nuclear Research Centre, Karlsruhe, from 6 to 10 June 1966, at the generous invitation of the Government of the Federal Republic of Germany, is the most recent of this series of meetings. It was held for the purpose of exchanging the most up-to-date results of research, of contributing towards co-operative efforts between Member States, and of stimulating trade in the international exchange of irradiated products between nations. Papers describing research over the past fourteen years were given by outstanding authorities; the results point to a breakthrough having been achieved in the use of ionizing radiation in food preservation, notwithstanding some problems still to be solved, such as overcoming changes in colour, flavour, odour or texture. The Symposium was attended by over 200 scientists from 25 countries and four international organizations. Sixty-nine papers were presented. It was shown that a wide variety of foodstuffs exist for which radiation could be used for three different purposes: to produce indefinitely stable products, to rid food of organisms that constitute health hazards, and to extend the normal shelf or market life

  11. Internal irradiation for cystic craniopharyngioma

    International Nuclear Information System (INIS)

    Kobayashi, T.; Kageyama, N.; Ohara, K.

    1981-01-01

    The authors report the results of internal irradiation with labeled chromic phosphate (32P) and gold-198 (198Au) colloid in eight cases of cystic craniopharyngiomas. They used a newly developed dosimetric formula, by which the radiation dose at the cyst wall and at any point far from the radioactive source can be calculated. Ten courses of irradiation in eight patients were carried out by injection of either 32P or 198Au colloid into the cyst through an Ommaya drainage system that had been placed at craniotomy. Follow-up studies ranging from 13 to 156 months revealed that all cysts were effectively treated, with elimination of fluid or collapse of the cyst. This was confirmed by Conray cystography and/or computerized tomography. Not only the dose delivered to the wall but also the thickness of the cyst wall and the location of the cyst are important factors in planning internal irradiation. A safe and adequate dose to the cyst wall could range between 9000 to 30,000 rads for craniopharyngioma. This treatment is suitable for large cysts that are thought to be difficult to remove radically, recurrent cysts resistant to previous treatment, or multiple cysts. Internal irradiation may also be applicable in other cystic intracranial tumors if dosimetry is calculated accurately

  12. International Developments of Food Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Loaharanu, P. [Head, Food Preservation Section, Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

    1997-12-31

    Food irradiation is increasingly accepted and applied in many countries in the past decade. Through its use, food losses and food-borne diseases can be reduced significantly, and wider trade in many food items can be facilitated. The past five decades have witnessed a positive evolution on food irradiation according to the following: 1940`s: discovery of principles of food irradiation; 1950`s: initiation of research in advanced countries; 1960`s: research and development were intensified in some advanced and developing countries; 1970`s: proof of wholesomeness of irradiated foods; 1980`s: establishment of national regulations; 1990`s: commercialization and international trade. (Author)

  13. International Developments of Food Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Loaharanu, P [Head, Food Preservation Section, Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

    1998-12-31

    Food irradiation is increasingly accepted and applied in many countries in the past decade. Through its use, food losses and food-borne diseases can be reduced significantly, and wider trade in many food items can be facilitated. The past five decades have witnessed a positive evolution on food irradiation according to the following: 1940`s: discovery of principles of food irradiation; 1950`s: initiation of research in advanced countries; 1960`s: research and development were intensified in some advanced and developing countries; 1970`s: proof of wholesomeness of irradiated foods; 1980`s: establishment of national regulations; 1990`s: commercialization and international trade. (Author)

  14. International Developments of Food Irradiation

    International Nuclear Information System (INIS)

    Loaharanu, P.

    1997-01-01

    Food irradiation is increasingly accepted and applied in many countries in the past decade. Through its use, food losses and food-borne diseases can be reduced significantly, and wider trade in many food items can be facilitated. The past five decades have witnessed a positive evolution on food irradiation according to the following: 1940's: discovery of principles of food irradiation; 1950's: initiation of research in advanced countries; 1960's: research and development were intensified in some advanced and developing countries; 1970's: proof of wholesomeness of irradiated foods; 1980's: establishment of national regulations; 1990's: commercialization and international trade. (Author)

  15. Internal irradiation for cystic craniopharyngioma

    International Nuclear Information System (INIS)

    Kobayashi, Tatsuya; Kageyama, Naoki

    1979-01-01

    Internal irradiation with P-32 chromic phosphate and Au-198 colloid was used to treat cystic craniopharyngioma. A newly developed dosimetric formula, by which the radiation dose can be calculated simultaneously at the cyst wall and at a point far from the radioactive source and the untoward effect of irradiation on surrounding brain tissue can be eliminated, especially in cases in which the wall is thin and can be penetrated by beta emission, was used. Radioactive phosphate or gold was injected into eight craniopharyngioma cysts throught the Ommaya reservoir and a tube inserted at the first craniotomy. All cysts were effectively treated for 3 to 33 months, to eliminate fluid retention or collapse. A collapsed cyst was removed at the second craniotomy and irradiation was histologically shown to be effective. Oculomotor palsy, a side effect of irradiation, occurred 10 days after the injection of 5 mc of P-32 chromic phosphate only in a case of small cysts (5.0 ml) in the supra- and intracellular regions. The thickness of the cyst wall was less than 0.5 mm and the oculomotor nerves were thought to adhere to the wall. Not only the amount of wall dose but also the thickness of the wall and localization of the cyst are important factors in internal irradiation. Sufficient and safer doses which kill tumor cells in the wall and have no side effects, are 9,000 to 30,000 rad. Internal irradiation can be used to treat large cysts of more than 10 ml which are supposedly difficult to remove radically and or multiple cysts. It is effective not only for cystic craniopharyngioma but also for intracrania cystic tumors other than craniopharyngioma, if dosimetry is accurate. (J.P.N.)

  16. New pallet irradiator for Gammaster International

    International Nuclear Information System (INIS)

    Moehlmann, J.H.F.

    1993-01-01

    State of the art technology offers many opportunities to improve production processes with ionizing radiation. Internal and external audits, in particular by regulatory bodies such as the FDA and DHSS/MCA, are necessary and commonplace requirements when operating in the healthcare and pharmaceutical sectors. Efficiency is a major requirement for industry and also for our radiation business. With all the above mentioned items in mind, Gammaster International B.V. has developed and built a new type Pallet Irradiator. For this irradiator Gammaster International designed and built a new process console, incorporating state of the art technology. (author)

  17. Wholesomeness studies in the International Food Irradiation Project

    Energy Technology Data Exchange (ETDEWEB)

    Elias, P S [International Food Irradiation Project, Federal Research Centre for Nutrition

    1980-01-01

    Despite more than 25 years of history as an effective food preservation method, food irradiation is still subject to strict legislative control in many countries and scientific investigations are required to provide reassurance as to the safety of irradiated food. The International Food Irradiation Project was set up on October 14, 1970 to facilitate the objective evaluation of the wholesomeness of irradiated foodstuffs. Its major activities are; (1) wholesomeness testing of irradiated foods, (2) research on and investigations into the methodology of wholesomeness testing, (3) dissemination of information, and (4) assisting national and international authorities in their consideration of acceptance of irradiated food. In particular, the project over the past nine years had been devoted to the provision of data to national health authorities and international bodies. Up to now, 23 studies were and are being carried out for the project under contract. Subjects for the studies include wheat, wheat flour, potatoes, fish, rice, mango, spices, dried dates, onions and cocoa beans.

  18. Wholesomeness studies in the International Food Irradiation Project

    International Nuclear Information System (INIS)

    Elias, P.S.

    1980-01-01

    Despite more than 25 years history as an effective food preservation method, food irradiation is still subject to strict legislative control in many countries and it is required to carry out scientific investigations to reassure the safety of irradiated food. The International Food Irradiation Project was set up on October 14, 1970 to facilitate the objective evaluation of the wholesomeness of irradiated foodstuffs. Its major activities are; (1) wholesomeness testing of irradiated foods, (2) research on and investigations into the methodology of wholesomeness testing, (3) dissemination of information, and (4) assisting national and international authorities in their consideration of acceptance of irradiated food. In particular, the project over the past nine years had been devoted to the provision of data to national health authorities and international bodies. Up to now, 23 studies were and are being carried out for the project under contract. Subject to the studies include wheat, wheat flour, potatoes, fish, rice, mango, spices, dried dates, onions and cocoa beans. (Kitajima, A.)

  19. Internal friction in irradiated textolite

    International Nuclear Information System (INIS)

    Zajkin, Yu.A.; Kozhamkulov, B.A.; Koztaeva, U.P.

    1996-01-01

    Structural relaxation in irradiated textolite of ST and ST-EhTF trade marks presenting pressed material got by method of impregnation of fibreglass by phenole and epoxytriphenole binders relatively. Measuring of temperature dependences of internal friction (TDIF) is carried out in torsional pendulum at oscillation frequency 0.6-1.0 Hz before and after irradiation by stopped gamma-quanta with energy 3 MeV on electron accelerator EhLU-4. α and β peaks, related with segments motion in base and side chains of macromolecular have being observed on TDIF of all textolite. Growth of peaks height after irradiation evident about increase of segments mobility in base chain and about de-freezing of segments in side chains and it could be considered as qualitative measure of radiation destruction rate. Comparison of temperature dependences of internal friction indicates on higher radiation stability of textolite of ST-EhTF trade mark

  20. International status of food irradiation

    International Nuclear Information System (INIS)

    Roberts, P.B.

    1982-09-01

    Recent international moves that are likely to result in an increasing acceptance of irradiated foods are reviewed. Particular attention is given to the activities of the FAO, WHO, Codex Alimentarius and to attitudes in the United States and the Asian-Pacific region. In 1979, the Codex Alimentarius Commission adopted a Recommended General Standard for Irradiated Food. A resume is given of a revised version of the standard that is presently under consideration. However, remaining barriers to trade in irradiated food are briefly discussed, such as legal and regulatory problems, labelling, public acceptance and economic viability

  1. Food irradiation receives international acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Beddoes, J M [Atomic Energy of Canada Ltd., Ottawa, Ontario. Commercial Products

    1982-04-01

    Irradiation has advantages as a method of preserving food, especially in the Third World. The author tabulates some examples of actual use of food irradiation with dates and tonnages, and tells the story of the gradual acceptance of food irradiation by the World Health Organization, other international bodies, and the U.S. Food and Drug Administration (USFDA). At present, the joint IAEA/FAO/WHO standard permits an energy level of up to 5 MeV for gamma rays, well above the 1.3 MeV energy level of /sup 60/Co. The USFDA permits irradiation of any food up to 10 krad, and minor constituents of a diet may be irradiated up to 5 Mrad. The final hurdle to be cleared, that of economic acceptance, depends on convincing the food processing industry that the process is technically and economically efficient.

  2. New pallet irradiation for Gammaster International

    Science.gov (United States)

    Möhlmann, Mr. J. H. F.

    1993-07-01

    State of the art technology offers many opportunities to improve production process with ionizing radiation. Also the requirements to this process become more and more stringent; who was aware of the ISO-9000 Standards? Now it is a necessary concept? Internal and external audits, in particular by Regulatory Bodies such as the FDA and DHSS/MCA, are necessary and commonplace requirements when operating in the Healthcare and Pharmaceutical sectors. Efficiency is a major requirement for industry and also for our radiation business. With all the above mentioned items in mind, Gammaster International B.V. in close cooperation with Nordion International Inc. has developed and built a new type Pallet Irradiator. In this new concept, our 22 years experience in gamma processing and the expertise gained in 10 years of operation of pallet irradiators was incorporated. For this irradiator Gammaster International designed and built a new process control console, incorporating state of the art technology such as: - A well-balanced safety system - A control panel, with status indication for all essential operating and safety parameters - Advances warning for necessary maintenance work - Automatic timer-setting control in addition to an automatic timer setting modification - Clear indication of the position of the product inside the unit and its status - Fully automatic product information generated when the product leaves the irradiation unit - Visual process control with the help of a color monitor - Incremental dose-control - Fault identification

  3. Radioresistance and immunization effectiveness under internal irradiation

    International Nuclear Information System (INIS)

    Kal'nitskij, S.A.

    1978-01-01

    The effect of preliminary immunization on the radioresistance of mice to internal irradiation from incorporated 137 Cs or 90 Sr was studied, and it was found that a preliminary single immunization with bacterial vaccines had a favorable effect on the outcome of radiation injury. The present results suggested that vaccination had a very pronounced radioprotective effect and so may be used as a means of biologic protection from internal irradiation

  4. International standards and agreements in food irradiation

    International Nuclear Information System (INIS)

    Cetinkaya, N.

    2004-01-01

    The economies of both developed and developing countries have been effected by their exported food and agricultural products. Trading policies of food and agricultural products are governed by international agreement as well as national regulations. Trade in food and agricultural commodities may be affected by both principal Agreements within the overall World Trade Organization (WTO) Agreement, though neither specifically refers to irradiation or irradiated foods. The principal Agreements are the Technical Barriers to Trade (TBT) Agreement and the Sanitary and Phyto sanitary (SPS) Agreement. The SPS of the WTO requires governments to harmonize their sanitary and phyto sanitary measures on as wide basis as possible. Related standards, guidelines and recommendations of international standard setting bodies such as the Codex Alimentarius Commission (food safety); the International Plant Protection Convention (IPPC) (plant health and quarantine); and International Office of Epizootic (animal health and zoo noses) should be used in such a harmonization. International Standards for Phyto sanitary Measures (ISPM) no.18 was published under the IPPC by FAO (April 2003, Rome-Italy). ISPM standard provides technical guidance on the specific procedure for the application of ionizing radiation as a phyto sanitary treatment for regulated pests or articles. Moreover, Codex Alimentarius Commission, Codex General Standard for Irradiated Foods (Stand 106-1983) and Recommended International Code of Practice were first published in 1983 and revised in March 2003. Scope of this standard applies to foods processed by ionizing radiation that is used in conjunction with applicable hygienic codes, food standards and transportation codes. It does not apply to foods exposed to doses imparted by measuring instruments used for inspection purposes. Codex documents on Principles and Guidelines for the Import/Export Inspection and Certification of Foods have been prepared to guide international

  5. 15 years of existence of the International Consultative Group on Food Irradiation (ICGFI)

    International Nuclear Information System (INIS)

    Ehlermann, D.A.E.

    1999-01-01

    The ICGFI essentially contributed to international dissemination of unbiased information about the advantages and risks of food irradiation. The body has issued ICGFI publications containing codes of good practice for a variety of purposes, as eg. for operation of irradiation facilities for the treatment of food (GIP), or guidelines for due handling of irradiated food (GMP). Training courses have been offered to scientists, especially from developing countries, as well as for inspectors of national supervisory authorities. The activities of the advisory group as well as the conditions governing future activities are discussed. (orig./CB) [de

  6. International Facility for Food Irradiation Technology

    International Nuclear Information System (INIS)

    Farkas, J.

    1982-01-01

    The International Facility for Food Irradiation Technology (IFFIT) was set up in November 1978 for a period of five years at the Pilot Plant for Food Irradiation, Wageningen, The Netherlands under an Agreement between the FAO, IAEA and the Ministry of Agriculture and Fisheries of the Government of the Netherlands. Under this Agreement, the irradiation facilities, office space and services of the Pilot Plant for Food Irradiation are put at IFFIT's disposal. Also the closely located Research Foundation, ITAL, provides certain facilities and laboratory services within the terms of the Agreement. The FAO and IAEA contribute US-Dollar 25,000. Annually for the duration of IFFIT. (orig.) [de

  7. Food irradiation receives international acceptance

    International Nuclear Information System (INIS)

    Beddoes, J.M.

    1982-01-01

    Irradition has advantages as a method of preserving food, especially in the Third World. The author tabulates some examples of actual use of food irradiation with dates and tonnages, and tells the story of the gradual acceptance of food irradiation by the World Health Organization, other international bodies, and the U.S. Food and Drug Administration (USFDA). At present, the joint IAEA/FAO/WHO standard permits an energy level of up to 5 MeV for gamma rays, well above the 1.3 MeV energy level of 60 Co. The USFDA permits irradiation of any food up to 10 krad, and minor constituents of a diet may be irradiated up to 5 Mrad. The final hurdle to be cleared, that of economic acceptance, depends on convincing the food processing industry that the process is technically and economically efficient

  8. Legal aspects and international implications of food irradiation

    International Nuclear Information System (INIS)

    Gerard, Alain.

    1977-11-01

    This paper reports on the status of work on food irradiation at international level, namely the IAEA/FAO/WHO Vienna recommendations, the proposed EEC directive, and the Codex alimentarius draft standards. It then deals with the legal aspects of the subject, in particular the problems concerning definitions, controls and instructions, and finally reviews the regulations for international trade in irradiated foodstuffs. (NEA) [fr

  9. Aversive conditioning in prenatally gamma-irradiated rats

    International Nuclear Information System (INIS)

    Tamaki, Yoshitaka; Hoshino, Kiyoshi; Kameyama, Yoshiro

    1987-01-01

    To examine how intrauterine exposure to gamma rays would exert on four kinds of aversive conditioning, rat fetuses were irradiated with 0.27, 0.48, or 1.46 Gy at Day 15 post conception. When ordinary avoidance conditioning was given to the groups with 0.27 and 0.48 Gy, there was no significant difference between the irradiated groups and the control group in the rate of positive avoidance response. Nor was this different in the irradiated groups and the control group, when the rate of baseline response was examined in avoidance conditioning. In positive avoidance conditioning to two kinds of anticipatory electric stimuli, the acquisition of avoidance was significantly inferior in all irradiated groups to that in the control group. When giving succesive discrimination learning, the group with 1.46 Gy tended to have higher rate of positive avoidance response and remarkably lower rate of passive avoidance response than the control group. (Namekawa, K.)

  10. International Fusion Materials Irradiation Facility conceptual design activity. Present status and perspective

    International Nuclear Information System (INIS)

    Kondo, Tatsuo; Noda, Kenji; Oyama, Yukio

    1998-01-01

    For developing the materials for nuclear fusion reactors, it is indispensable to study on the neutron irradiation behavior under fusion reactor conditions, but there is not any high energy neutron irradiation facility that can simulate fusion reactor conditions at present. Therefore, the investigation of the IFMIF was begun jointly by Japan, USA, Europe and Russia following the initiative of IEA. The conceptual design activities were completed in 1997. As to the background and the course, the present status of the research on heavy irradiation and the testing means for fusion materials, the requirement and the technical basis of high energy neutron irradiation, and the international joint design activities are reported. The materials for fusion reactors are exposed to the neutron irradiation with the energy spectra up to 14 MeV. The requirements from the users that the IFMIF should satisfy, the demand of the tests for the materials of prototype and demonstration fusion reactors and the evaluation of the neutron field characteristics of the IFMIF are discussed. As to the conceptual design of the IFMIF, the whole constitution, the operational mode, accelerator system and target system are described. (K.I.)

  11. International standards and agreements in food irradiation

    International Nuclear Information System (INIS)

    Cetinkaya, N.

    2004-01-01

    Full text: The economies of both developed and developing countries have been effected by their exported food and agricultural products. Trading policies of food and agricultural products are governed by international agreement as well as national regulations. Trade in food and agricultural commodities may be affected by both principal Agreements within the overall World Trade Organization (WTO) Agreement, though neither specifically refers to irradiation or irradiated foods. The principal Agreements are the Technical Barriers to Trade (TBT) Agreement and the Sanitary and Phyto sanitary (SPS) Agreement. The SPS of the WTO requires governments to harmonize their sanitary and phyto sanitary measures on as wide basis as possible. Related standards, guidelines and recommendations of international standard setting bodies such as the Codex Alimentarius Commission (food safety); the International Plant Protection Convention (IPPC) (plant health and quarantine); and International Office of Epizootic (animal health and zoo noses) should be used in such a harmonization. International Standards for Phyto sanitary Measures (ISPM) no.18 was published under the IPPC by FAO (April 2003, Rome-Italy). ISPM standard provides technical guidance on the specific procedure for the application of ionizing radiation as a phyto sanitary treatment for regulated pests or articles. Moreover, Codex Alimentarius Commission, Codex General Standard for Irradiated Foods (Stand 106-1983) and Recommended International Code of Practice were first published in 1983 and revised in March 2003. Scope of this standard applies to foods processed by ionizing radiation that is used in conjunction with applicable hygienic codes, food standards and transportation codes. It does not apply to foods exposed to doses imparted by measuring instruments used for inspection purposes. Codex documents on Principles and Guidelines for the Import/Export Inspection and Certification of Foods have been prepared to guide

  12. Comparative study of the tungsten irradiation conditions in IFMIF and DEMO

    Energy Technology Data Exchange (ETDEWEB)

    Simakov, S.P.; Pereslavtsev, P.; Fischer, U. [Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen (Germany). Inst. for Neutron Physics and Reactor Technology; Moeslang, A. [Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen (Germany). Inst. for Material Research I

    2010-05-15

    The International Fusion Material Irradiation Facility (IFMIF) [1] will provide an accelerator based intense neutron source with a white spectrum extending up to 55 MeV for high fluence irradiations of fusion power reactor (FPR) candidate materials. Material samples located in test modules will be subjected to a radiation load anticipated for a fusion power reactor. The highest neutron flux is expected in the High Flux Test Module, which is considered in the IFMIF design to host around 1000 compactly packed stainless steel samples - the main structure materials of power fusion reactors. Another material subjected to the highest loads in a FPR is a tungsten. It is planned to be used as armour tiles for the divertor or the first wall. It turned out that no specific effort has been undertaken so far to search for a suitable irradiation location in the IFMIF Test Cell which provides a reasonable representation of the irradiation conditions in the divertor of a fusion power reactors. (orig.)

  13. DNA damage induced by radionuclide internal irradiation

    International Nuclear Information System (INIS)

    Cui Fengmei; Zhao Jingyong; Hong Chengjiao; Lao Qinhua; Wang Liuyi; Yang Shuqin

    2004-01-01

    Objective: To study the DNA damage of peripheral blood mononuclear cell (PBMC) in rats exposed to radionuclide internal irradiation. Methods: The radionuclides were injected into the rats and single cell get electrophoresis (SCGE) was performed to detect the length of DNA migration in the rat PBMC. Results: DNA migration in the rat PBMC increased with accumulative dose or dose-rate. It showed good relationship of dose vs. response and of dose-rate vs. response, both relationship could be described as linear models. Conclusion: Radionuclide internal irradiation could cause DNA damage in rat PBMC. (authors)

  14. Nuclear irradiation parameters of beryllium under fusion, fission and IFMIF irradiation conditions

    International Nuclear Information System (INIS)

    Fischer, U.; Chen, Y.; Leichtle, D.; Simakov, S.; Moeslang, A.; Vladimirov, P.

    2004-01-01

    A computational analysis is presented of the nuclear irradiation parameters for Beryllium under irradiation in typical neutron environments of fission and fusion reactors, and of the presently designed intense fusion neutron source IFMIF. The analysis shows that dpa and Tritium production rates at fusion relevant levels can be achieved with existing high flux fission reactors while the achievable Helium production is too low. The resulting He-Tritium and He/dpa ratios do not meet typical fusion irradiation conditions. Irradiation simulations in the medium flux test modules of the IFMIF neutron source facility were shown to be more suitable to match fusion typical irradiation conditions. To achieve sufficiently high production rates it is suggested to remove the creep-fatigue testing machine together with the W spectra shifter plate and move the tritium release module upstream towards the high flux test module. (author)

  15. International Cooperation to Establish Standard Operating Procedure (SOP) for Quarantine Management of Irradiated Foods in International Trade

    International Nuclear Information System (INIS)

    Lee, J. W.; Byun, M. W.; Kim, J. H.; Choi, J. I.; Song, B. S.; Yoon, Y. H.; Kim, D. H.; Kim, W. G.; Kim, K. P.

    2010-02-01

    · Development of SOPs through various research activities such as building international cooperation, and analysing current status of food irradiation in domestic and international markets, export and import, international market size, and of R and D - Analysis of examples for quarantine management in agricultural product exporting countries and use of irradiation technology for agricultural product quarantine, and changes in international quarantine management - Analysis of SOPs for food irradiation quarantine in international organization (CODEX, IPPC, WHO). U.S, EU, China, India, and Australia. - Collaborative researches of India/Korea and China/Korea entered into an agreement for market trials · Publishment of irradiation quarantine management SOPs agreed to CODEX standards - Collaborative researches for quarantine management, avoiding Technical Barrier to Trade (TBT), and Sanitary Phytosanitary Measures were conducted, and advanced SOPs agreed with WTO/FTA system were published

  16. Investigation of the internal electric field distribution under in situ x-ray irradiation and under low temperature conditions by the means of the Pockels effect

    International Nuclear Information System (INIS)

    Prekas, G; Sellin, P J; Veeramani, P; Davies, A W; Lohstroh, A; Oezsan, M E; Veale, M C

    2010-01-01

    The internal electric field distribution in cadmium zinc telluride (CdZnTe) x-ray and γ-ray detectors strongly affects their performance in terms of charge transport and charge collection properties. In CdZnTe detectors the electric field distribution is sensitively dependent on not only the nature of the metal contacts but also on the working conditions of the devices such as the temperature and the rate of external irradiation. Here we present direct measurements of the electric field profiles in CdZnTe detectors obtained using the Pockels electo-optic effect whilst under in situ x-ray irradiation. These data are also compared with alpha particle induced current pulses obtained by the transient current technique, and we discuss the influence of both low temperature and x-ray irradiation on the electric field evolution. Results from these studies reveal strong distortion of the electric field consistent with the build-up of space charge at temperatures below 250 K, even in the absence of external irradiation. Also, in the presence of x-ray irradiation levels a significant distortion in the electric field is observed even at room temperature which matches well the predicted theoretical model.

  17. International training workshop on quality control and management of food irradiation

    International Nuclear Information System (INIS)

    2004-01-01

    The International Training Workshop on Quality Control and Management of Food Indantrione was hold from 28-30, August, 2004 in Beijing, China and organized by Chinese Society of Nuclear Agriculture and China Isotope and Radiation Association. 10 Articles were collected in this symposium including training lectures. The contents included: international developments in food irradiation, Quality control and magement of food irradiation, industrializing development of irradiated food in China, Food irradiator and its quality management, research in setting standard for enterprise about irradiated products and etc.

  18. International Cooperation to Establish Standard Operating Procedure (SOP) for Quarantine Management of Irradiated Foods in International Trade

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J. W.; Byun, M. W.; Kim, J. H.; Choi, J. I.; Song, B. S.; Yoon, Y. H.; Kim, D. H.; Kim, W. G.; Kim, K. P.

    2010-02-15

    {center_dot} Development of SOPs through various research activities such as building international cooperation, and analysing current status of food irradiation in domestic and international markets, export and import, international market size, and of R and D - Analysis of examples for quarantine management in agricultural product exporting countries and use of irradiation technology for agricultural product quarantine, and changes in international quarantine management - Analysis of SOPs for food irradiation quarantine in international organization (CODEX, IPPC, WHO). U.S, EU, China, India, and Australia. - Collaborative researches of India/Korea and China/Korea entered into an agreement for market trials {center_dot} Publishment of irradiation quarantine management SOPs agreed to CODEX standards - Collaborative researches for quarantine management, avoiding Technical Barrier to Trade (TBT), and Sanitary Phytosanitary Measures were conducted, and advanced SOPs agreed with WTO/FTA system were published

  19. Internal friction in irradiated silicon

    International Nuclear Information System (INIS)

    Kalanov, M.U.; Pajzullakhanov, M.S.; Khajdarov, T.; Ummatov, Kh.

    1999-01-01

    The submicroscopic heterogeneities in mono- and polycrystal silicon and the influence of X-ray radiation on them were investigated using the ultrasound resonance method. Disk-shaped samples of 27.5 mm in diameter and 4 mm in thickness, with the flat surface parallel to crystallographic plane (111), were irradiated by X-ray beam of 1 Wt/cm 2 (50 KeV, Mo K α ) during 10 hours. Relations of internal frictions (Q -1 ) of samples and their relative attitude (ψ) - Q -1 (ψ) show that there is a presence of double-humped configuration for monocrystal silicon with the peaks at ψ=900 and 270 degrees. The relations Q -1 (ψ) remain the same after the irradiation. However, the peak width becomes larger. This data show that the configuration and attitude of the heterogeneities remain the same after the irradiation. The double-humped configuration was not discovered for the relations Q -1 (ψ) of polycrystal silicon. It is explained by the fact that there is an isotropic distribution in the content of many blocks and granules

  20. The characteristics and mechanism of apoptosis induced by internal irradiation

    International Nuclear Information System (INIS)

    Hong Chengjiao; Zhang Junning; Zhu Shoupeng

    2001-01-01

    Apoptosis in tumor cells induced by radionuclides is likely the most effective way to cure cancer. In order to explore the possibility in clinic application, the characteristics and mechanism of apoptosis induced by internal irradiation were investigated. The apoptosis and expressions of bcl-2mRNA, bcl-2 and bax of K 562 cells following internal exposure with different accumulated absorbed doses of strontium-89 were studied. 6 h after irradiation, the characteristics of apoptosis and necrosis appeared in K 562 cells. The apoptosis and necrosis enhanced with the prolongation of internally contaminated time at 6 h, 9 h, 12 h, 24 h and 48 h. The expressions of bcl-2mRNA decreased at 12 h, most remarkably at 24 h. The expressions of bcl-2 decreased after irradiation whereas bax had no obvious changes. The results suggest that the apoptosis induced by internal exposure may be regulated by lower expressions of bcl-2mRNA and bcl-2, lower bcl-2/bax value

  1. Electrical in situ and post-irradiation properties of ceramics relevant to fusion irradiation conditions

    International Nuclear Information System (INIS)

    Shikama, Tatsuo; Zinkle, S.J.

    2002-01-01

    Electrical properties of ceramic candidate materials for the next-generation nuclear fusion devices under relevant irradiation conditions are reviewed. A main focal point is placed on the degradation behavior of the electrical insulating ability during and after irradiation. Several important radiation induced effects play important roles: radiation induced conductivity, thermally stimulated electrical conductivity, radiation induced electrical charge separation, and radiation induced electromotive force. These phenomena will interact with each other under fusion relevant irradiation conditions. The design of electrical components for the next-generation fusion devices should take into account these complicated interactions among the radiation induced phenomena

  2. Food Preservation by Irradiation. Vol. II. Proceedings of an International Symposium on Food Preservation by Irradiation

    International Nuclear Information System (INIS)

    1978-01-01

    In the task of alleviating the distress caused by the world-wide food shortage it is essential to preserve what has been grown and harvested in the fields. Clearly all suitable methods for preserving agricultural produce and food should be made use of. In this context treatment with ionizing radiation has proved its value as an environmentally clean, physical method of food preservation which is low in its energy requirement, but the volume of food being processed in this way is still low. The introduction of food irradiation on a global basis poses certain economic, legal, regulatory and health-related questions, the solution of which requires close international collaboration. Such collaboration between many international, intergovernmental and national organizations began over a decade ago. The need for dissemination and discussion of information gained through research and development work on this subject became apparent, and a number of inter-regional meetings were held. The last international symposium on the topic was held jointly by FAO and the IAEA in 1972 in Bombay. To review progress made since then, FAO and the IAEA, together with WHO, convened the present Symposium on 21-25 November 1977. It appeared timely to hold this Symposium for the following reasons: (1) Apart from significant scientific work reported in the literature, progress in other directions between 1972 and 1977 had also been made. For example, the number of food items authorized by governments, with or without restriction, had grown from 19 to 26, and the number of countries accepting one or more irradiated foods for human consumption had increased from 11 to 19. (2) Largely on the basis of the work of the International Project in the Field of Food Irradiation (Karlsruhe), already described at the Bombay Symposium, an international expert committee, jointly convened by FAO, the IAEA and WHO in August-September 1976, had made important statements on the philosophy of wholesomeness studies

  3. Food Preservation by Irradiation. Vol. I. Proceedings of an International Symposium on Food Preservation by Irradiation

    International Nuclear Information System (INIS)

    1978-01-01

    In the task of alleviating the distress caused by the world-wide food shortage it is essential to preserve what has been grown and harvested in the fields. Clearly all suitable methods for preserving agricultural produce and food should be made use of. In this context treatment with ionizing radiation has proved its value as an environmentally clean, physical method o f food preservation which is low in its energy requirement, but the volume of food being processed in this way is still low. The introduction o f food irradiation on a global basis poses certain economic, legal, regulatory and health-related questions, the solution o f which requires close international collaboration. Such collaboration between many international, intergovernmental and national organizations began over a decade ago. The need for dissemination and discussion o f information gained through research and development work on this subject became apparent, and a number of inter-regional meetings were held. The last international symposium on the topic was held jointly by FAO and the IAEA in 1972 in Bombay. To review progress made since then, FAO and the IAEA, together with WHO, convened the present Symposium on 21-25 November 1977. It appeared timely to hold this Symposium for the following reasons: (1) Apart from significant scientific work reported in the literature, progress in other directions between 1972 and 1977 had also been made. For example, the number of food items authorized by governments, with or without restriction, had grown from 19 to 26, and the number of countries accepting one or more irradiated foods for human consumption had increased from 11 to 19. (2) Largely on the basis of the work of the International Project in the Field of Food Irradiation (Karlsruhe), already described at the Bombay Symposium, an international expert committee, jointly convened by FAO, the IAEA and WHO in August-September 1976, had made important statements on the philosophy of wholesomeness

  4. The dynamics of immunologic reactions in rats affected by repeated external γ-irradiation and internal irradiation with radionuclides

    International Nuclear Information System (INIS)

    Shubik, V.M.; Livshits, R.E.

    1975-01-01

    Nonspecific factors of immunity and formation of autoantibodies in rats exposed to comparable doses of repeated external γ-irradiation and of internal irradiation with Cs 137 , Sr 90 and I 131 chronically administered to animals have been studied comparatively. No essential variations have been found in changes induced in the immunologic reactions by chronic external and even internal γ-irradiation. Certain peculiarities have been revealed in the character of changes in the immunologic reactions depending on biophysical properties of the radionuclides used in the experiments

  5. The effect of gamma-irradiation conditions on the immunogenicity of whole-inactivated Influenza A virus vaccine.

    Science.gov (United States)

    David, Shannon C; Lau, Josyane; Singleton, Eve V; Babb, Rachelle; Davies, Justin; Hirst, Timothy R; McColl, Shaun R; Paton, James C; Alsharifi, Mohammed

    2017-02-15

    Gamma-irradiation, particularly an irradiation dose of 50kGy, has been utilised widely to sterilise highly pathogenic agents such as Ebola, Marburg Virus, and Avian Influenza H5N1. We have reported previously that intranasal vaccination with a gamma-irradiated Influenza A virus vaccine (γ-Flu) results in cross-protective immunity. Considering the possible inclusion of highly pathogenic Influenza strains in future clinical development of γ-Flu, an irradiation dose of 50kGy may be used to enhance vaccine safety beyond the internationally accepted Sterility Assurance Level (SAL). Thus, we investigated the effect of irradiation conditions, including high irradiation doses, on the immunogenicity of γ-Flu. Our data confirm that irradiation at low temperatures (using dry-ice) is associated with reduced damage to viral structure compared with irradiation at room temperature. In addition, a single intranasal vaccination with γ-Flu irradiated on dry-ice with either 25 or 50kGy induced seroconversion and provided complete protection against lethal Influenza A challenge. Considering that low temperature is expected to reduce the protein damage associated with exposure to high irradiation doses, we titrated the vaccine dose to verify the efficacy of 50kGy γ-Flu. Our data demonstrate that exposure to 50kGy on dry-ice is associated with limited effect on vaccine immunogenicity, apparent only when using very low vaccine doses. Overall, our data highlight the immunogenicity of influenza virus irradiated at 50kGy for induction of high titre antibody and cytotoxic T-cell responses. This suggests these conditions are suitable for development of γ-Flu vaccines based on highly pathogenic Influenza A viruses. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Clinical effects of chronic irradiation in conditions of Chernobyl exclusion zone

    International Nuclear Information System (INIS)

    Nyagu, A.I.; Loganovskij, K.N.; Kostyuchenko, V.G.

    1999-01-01

    Threshold doses for des adaptation syndrome development during chronic external and internal irradiation were found. Effects of small dose accumulation were established. Chronic irradiation is resulted in different dystrophic processes, psychosomatic violations and in increase of stochastic effects

  7. Influence of irradiation conditions on the gamma irradiation effect in polyethylene

    International Nuclear Information System (INIS)

    Kacarevic-Popovic, Z.; Gal, O.; Novakovic, L.J.; Secerov, B.

    2002-01-01

    Complete text of publication follows. The radiation cross-linking of polyethylene, due to its high cross-linking yield, has resulted in the radiation technology that has found application in radiation production of heat shrinkable structures and in improvement of mechanical and thermo-physical properties of oriented polyethylene objects. It is observed that the cross-linking efficiency decreases when the irradiation is carried out in the presence of oxygen. In order to estimate the conditions that improve cross-linking efficiency, gamma irradiation effect in two types of polyethylene, irradiated in water and air was investigated. The polyethylene samples used were the low density (LDPE) Lotrene CdF 0302 with 45% crystallinity and the high density (HDPE) Hiplex EHM 6003 with 73% crystallinity. Both kinds of samples, fixed in the Pyrex glass tubes, were simultaneously irradiated with 60 Co gamma rays in distilled water and air, at a doses rate of 9,5 kGy/h (determined by the Fricke dosimeter) at room temperature. Radiation induced oxidative degradation was followed through oxygen containing group formation by the carbonyl group band (1720 cm -1 ) and transvinylene group formation by the band at 966 cm -1 in the infrared spectra. Cross-linking efficiency was determined by gel content using the procedure of the extraction in xylene. The monitored effects of gamma irradiation in water and air point to the conclusion that irradiation in water leads to the lower oxidative degradation and higher cross-linking compared with the effects measured after irradiation in air

  8. Combined effect of external and internal irradiation

    International Nuclear Information System (INIS)

    Kiradzhiev, G.

    1987-01-01

    Some of the general regularities of the combined effect of external irradiation and iodine 131 are discussed. Data are adduced showing that modification of the effects of these two radiation factors, when jointly applied, is also determined by the quantitative relations of the applied doses of external and internal irradiation, referred to a particular moment of the effects. It was shown that the effects of the radionuclides in these combined radiation injuries are basically realized by two mechanisms: 1. changes are found in the radionuclide kinetic parameters (nonspecific effects); 2. changes in their kinetic parameters are absent (specific effect). These two mechanisms underlie different approaches to therapy

  9. Dielectric parameters of blood plasma in rats at external and internal irradiation with sublethal doses

    International Nuclear Information System (INIS)

    Khadzhidekova, E.; Kiradzhiev, G.

    1991-01-01

    Sexually mature male rats have received external gamma irradiation with 50, 200 or 380 cGy, treated with 89 Sr (333 or 1665 kBq per rat, femur dose 70, resp. 290 cGy), or 144 Ce (370 kBq per rat, liver dose 70 cGy). Dielectric parameters (permittivity and conductivity) have been measured in the frequency range 1.4 - 17 Mhz on different terms (1 to 30th day after the treatment). For all groups and terms the coefficients and equations describing the relationship between the dielectric permittivity ε and the frequency ν of the changing electric field have been calculated. On the basis of dielectric parameters the relaxation time of the plasma protein molecules is determined. It has been shown that the changes in dielectric permittivity are expressed at different frequencies specific for a given dose; the same is established for the conditions of internal irradiation. The frequency dependence of the permittivity is described as an exponential curve analogous to that of the control but with a changed exponent. In applying higher doses or activities the relationship turns from exponential to parabolic. The relaxation time, expressing the changes in conformal state of macromolecules, varies but is in all cases longer than one of the controls for the whole period of study at external irradiation with 50 and 380 cGy. It is lower at irradiation with 200 cGy, as well as at internal irradiation. 3 tabs., 13 refs

  10. Neutronics analysis of International Fusion Material Irradiation Facility (IFMIF). Japanese contributions

    International Nuclear Information System (INIS)

    Oyama, Yukio; Noda, Kenji; Kosako, Kazuaki.

    1997-10-01

    In fusion reactor development for demonstration reactor, i.e., DEMO, materials tolerable for D-T neutron irradiation are absolutely required for both mechanical and safety point of views. For this requirement, several kinds of low activation materials were proposed. However, experimental data by actual D-T fusion neutron irradiation have not existed so far because of lack of fusion neutron irradiation facility, except fundamental radiation damage studies at very low neutron fluence. Therefore such a facility has been strongly requested. According to agreement of need for such a facility among the international parties, a conceptual design activity (CDA) of International Fusion Material Irradiation Facility (IFMIF) has been carried out under the frame work of the IEA-Implementing Agreement. In the activity, a neutronics analysis on irradiation field optimization in the IFMIF test cell was performed in three parties, Japan, US and EU. As the Japanese contribution, the present paper describes a neutron source term as well as incident deuteron beam angle optimization of two beam geometry, beam shape (foot print) optimization, and dpa, gas production and heating estimation inside various material loading Module, including a sensitivity analysis of source term uncertainty to the estimated irradiation parameters. (author)

  11. Effects of non-steady irradiation conditions on fusion materials performance

    International Nuclear Information System (INIS)

    Matsui, H.; Fukumoto, K.; Nagumo, T.; Nita, N.

    2001-01-01

    During startup of fusion reactors, materials are exposed to neutron irradiation under non-steady temperature condition. Since the temperature of irradiation has decisive effects on the microstructural evolution, the non-steady temperature will have important consequences in the performance of fusion reactor materials. In the present study, a series of vanadium based alloys have been irradiated with neutrons in a temperature cycling condition. It has been found from this study that cavity number density is much greater in temperature cycled specimens than in steady temperature irradiation. Keeping the upper temperature constant, cavity number density is greater for smaller difference between the upper and the lower temperature. It follows that relatively small temperature excursions may have rather significant effects on the fusion material performance in service. (author)

  12. Behaviour of the activity of cellulase irradiated under various conditions

    International Nuclear Information System (INIS)

    Kumakura, M.; Kaetsu, I.

    1988-01-01

    The activity of cellulase irradiated at various conditions has been studied. The activity of cellulase irradiated at low temperature (-78 0 C) increased by heating at 40 0 C, but that of cellulase irradiated at high temperature above 0 0 C decreased. The activity of cellulase irradiated in the dry state at room temperature increased with irradiation dose. The effect of adding biological substances such as amino acids, enzymes, and agar on the irradiation of cellulase was studied. It was shown that EDTA and p-benzoquinone have a protective ability against radiation-induced inactivation of the enzyme. (author)

  13. Behaviour of the activity of cellulase irradiated under various conditions

    Energy Technology Data Exchange (ETDEWEB)

    Kumakura, M; Kaetsu, I

    1988-04-18

    The activity of cellulase irradiated at various conditions has been studied. The activity of cellulase irradiated at low temperature (-78 /sup 0/C) increased by heating at 40 /sup 0/C, but that of cellulase irradiated at high temperature above 0 /sup 0/C decreased. The activity of cellulase irradiated in the dry state at room temperature increased with irradiation dose. The effect of adding biological substances such as amino acids, enzymes, and agar on the irradiation of cellulase was studied. It was shown that EDTA and p-benzoquinone have a protective ability against radiation-induced inactivation of the enzyme.

  14. Influence of electron irradiation on internal friction and structure evolution of polymer composites

    International Nuclear Information System (INIS)

    Ismailova, G.A.

    2007-01-01

    Full text: Important qualitative information on structural evolution and radiation alterations in polymer materials under the action of ionizing radiation can be obtained from the analysis of the temperature dependences of internal friction. Changing of internal friction parameters of relax maxima during irradiation is qualitative degree parameter of radiation scission-cross linking of the polymer molecules. In this work, the general phenomenological approach is realized by introduction of the effective 'observed' parameters into the simple kinetic equations. The applicability of such approach is justified by the fact that kinetics of both internal friction and scission-cross linking processes can be characterized by the same effective parameters. Temperature dependences of internal friction are experimentally studied in epoxy irradiated by 2.5 MeV pulse electron beam to different doses (D=3 MGy, 6 MGy and 9 MGy). Time dependences of internal friction characteristics associated with radiation-induced processes of polymer scission and cross-linking are analyzed and discussed. Experimental data on kinetics of structural transformations in epoxy are interpreted on the base of analytical solutions of differential equations for free radical accumulation during and after irradiation subject to the arbitrary effective order of radical recombination. It is shown that in the range of doses and dose rates under study radiation-induced scission predominates during polymer irradiation but in a certain period of time after irradiation scission changes to cross-linking. Characteristics of the kinetic curves obtained essentially depend on the dose

  15. Worldwide status of food irradiation and the role of IAEA and other international organizations

    International Nuclear Information System (INIS)

    Loaharanu, P.

    1988-01-01

    While there has been an increasing interest in introducing irradiation for preservation and decontamination of food by national authorities and food industry, this technology has generated wide public debate in view of its perceived association with nuclear technology. The purpose of this paper is twofold: (1) to provide objectivity to the application of irradiation for food processing and (2) to project future trends of this technology. Irradiation appears to offer the most viable alternative to the existing technologies in quarantine treatment, hygienic quality of foods, reduction of food losses, and increase in market demand for fresh foods. Current limitations of food irradiation are discussed in terms of technical aspects, infrastructure and economics, consumer concerns, and harmonization of national regulations. Commercial applications have been reported in 19 countries. It is estimated that the total production of irradiated foods world-wide amounted to approximately 500,000 tons per annum. To ensure an effective implementation of the technology on a global basis, FAO and WHO have collaborated closely with the IAEA. An International Consultative Group on Food Irradiation was established under the aegis of FAO, IAEA, and WHO in May 1984. These organizations play an important role in training, technology transfer, developing guidelines on specific applications of food irradiation, international register of food irradiation facilities, acceptance and international trade in irradiated foods, and public information. (Namekawa, K.)

  16. Worldwide status of food irradiation and the role of IAEA and other international organizations

    Energy Technology Data Exchange (ETDEWEB)

    Loaharanu, P.

    1988-04-01

    While there has been an increasing interest in introducing irradiation for preservation and decontamination of food by national authorities and food industry, this technology has generated wide public debate in view of its perceived association with nuclear technology. The purpose of this paper is twofold: (1) to provide objectivity to the application of irradiation for food processing and (2) to project future trends of this technology. Irradiation appears to offer the most viable alternative to the existing technologies in quarantine treatment, hygienic quality of foods, reduction of food losses, and increase in market demand for fresh foods. Current limitations of food irradiation are discussed in terms of technical aspects, infrastructure and economics, consumer concerns, and harmonization of national regulations. Commercial applications have been reported in 19 countries. It is estimated that the total production of irradiated foods world-wide amounted to approximately 500,000 tons per annum. To ensure an effective implementation of the technology on a global basis, FAO and WHO have collaborated closely with the IAEA. An International Consultative Group on Food Irradiation was established under the aegis of FAO, IAEA, and WHO in May 1984. These organizations play an important role in training, technology transfer, developing guidelines on specific applications of food irradiation, international register of food irradiation facilities, acceptance and international trade in irradiated foods, and public information. (Namekawa, K.).

  17. High-flux He+ irradiation effects on surface damages of tungsten under ITER relevant conditions

    International Nuclear Information System (INIS)

    Liu, Lu; Liu, Dongping; Hong, Yi; Fan, Hongyu; Ni, Weiyuan; Yang, Qi; Bi, Zhenhua; Benstetter, Günther; Li, Shouzhe

    2016-01-01

    A large-power inductively coupled plasma source was designed to perform the continuous helium ions (He + ) irradiations of polycrystalline tungsten (W) under International Thermonuclear Experimental Reactor (ITER) relevant conditions. He + irradiations were performed at He + fluxes of 2.3 × 10 21 –1.6 × 10 22 /m 2  s and He + energies of 12–220 eV. Surface damages and microstructures of irradiated W were observed by scanning electron microscopy. This study showed the growth of nano-fuzzes with their lengths of 1.3–2.0 μm at He + energies of >70 eV or He + fluxes of >1.3 × 10 22 /m 2  s. Nanometer-sized defects or columnar microstructures were formed in W surface layer due to low-energy He + irradiations at an elevated temperature (>1300 K). The diffusion and coalescence of He atoms in W surface layers led to the growth and structures of nano-fuzzes. This study indicated that a reduction of He + energy below 12–30 eV may greatly decrease the surface damage of tungsten diverter in the fusion reactor.

  18. Influence of chronic internal and acute external irradiations on the critical tissues of plants

    International Nuclear Information System (INIS)

    Kostyuk, O.P.; Ryasnenko, N.A.; Grodzins'kij, D.M.

    1998-01-01

    Peculiarities of chronic internal and acute external irradiations of the critical (as for irradiation influence) plants part, meristem, are studied. In particular, the investigation has aimed to evaluate the level of doses, accumulated by plant tissues, of the chronic internal irradiation from radiocaesium incorporated by them, and to compare its possible effect to one caused by the acute external irradiation. It is shown that the effects of both chronic and acute irradiations have similar features, and it is assumed that they have the very same mechanisms. We think that such a parameter of the plant ability to accumulate radiocaesium as the ratio of its content in a root tip and in the whole root system is a very sensible and useful criterion to estimate the irradiation influence on plants

  19. Food problems and food irradiation, recent trend

    International Nuclear Information System (INIS)

    1990-01-01

    Food irradiation is to contribute to the stable security of foodstuffs which is the fundamental condition of human survival by improving the preservation of foodstuffs and food sanitation utilizing the biological effect due to irradiation. The research and development have been carried out internationally since 1950s, but after the safety declaration of irradiated foods in 1980 by the international organ concerned, the permission and practical use for foods in various foreign countries, the technology transfer to developing countries and so on have been advanced. At present, food irradiation is permitted in 38 countries, and the practical irradiation is carried out in 24 countries. In Japan, the irradiation of potatoes to prevent germination was permitted in 1972, and the practical irradiation on potatoes of yearly 15,000 t is carried out. In the near future, irradiated foods will appear in international foodstuff market, and Japan which imports foodstuffs must cope with them. Foodstuffs and the safety, food irradiation, the soundness of irradiated foods, food irradiation in various foreign countries and Japan, the trend of international organs and the criticism of food irradiation are reported. (K.I.)

  20. Study by internal friction of curing low temperature irradiation defects in graphite

    International Nuclear Information System (INIS)

    Rouby, Dominique.

    1974-01-01

    Micromechanical properties and anelastic effects of neutrons irradiated graphites at 300 and 77 0 K are investigated by internal friction analysis and elasticity modulus variations. Defects created by irradiation are studied and evolution versus dose and annealing is followed [fr

  1. Mitigating IASCC of Reactor Core Internals by Post-Irradiation Annealing

    International Nuclear Information System (INIS)

    Was, Gary

    2017-01-01

    This final report summarizes research performed during the period between September 2012 and December 2016, with the objective of establishing the effectiveness of post-irradiation annealing (PIA) as an advanced mitigation strategy for irradiation-assisted stress corrosion cracking (IASCC). This was completed by using irradiated 304SS control blade material to conduct crack initiation and crack growth rate (CGR) experiments in simulated BWR environment. The mechanism by which PIA affects IASCC susceptibility will also be verified. The success of this project will provide a foundation for the use of PIA as a mitigation strategy for core internal components in commercial reactors.

  2. Mitigating IASCC of Reactor Core Internals by Post-Irradiation Annealing

    Energy Technology Data Exchange (ETDEWEB)

    Was, Gary [Univ. of Michigan, Ann Arbor, MI (United States)

    2017-06-02

    This final report summarizes research performed during the period between September 2012 and December 2016, with the objective of establishing the effectiveness of post-irradiation annealing (PIA) as an advanced mitigation strategy for irradiation-assisted stress corrosion cracking (IASCC). This was completed by using irradiated 304SS control blade material to conduct crack initiation and crack growth rate (CGR) experiments in simulated BWR environment. The mechanism by which PIA affects IASCC susceptibility will also be verified. The success of this project will provide a foundation for the use of PIA as a mitigation strategy for core internal components in commercial reactors.

  3. Nuclear data needs for neutron spectrum tailoring at International Fusion Materials Irradiation Facility (IFMIF)

    International Nuclear Information System (INIS)

    Sugimoto, Masayoshi

    2001-01-01

    International Fusion Materials Irradiation Facility (IFMIF) is a proposal of D-Li intense neutron source to cover all aspects of the fusion materials development in the framework of IEA collaboration. The new activity has been started to qualifying the important technical issues called Key Element technology Phase since 2000. Although the neutron spectrum can be adjusted by changing the incident beam energy, it is favorable to be carried out many irradiation tasks at the same time under the unique beam condition. For designing the tailored neutron spectrum, neutron nuclear data for the moderator-reflector materials up to 50 MeV are required. The data for estimating the induced radioactivity is also required to keep the radiation level low enough at maintenance time. The candidate materials and the required accuracy of nuclear data are summarized. (author)

  4. Nuclear data needs for neutron spectrum tailoring at International Fusion Materials Irradiation Facility (IFMIF)

    Energy Technology Data Exchange (ETDEWEB)

    Sugimoto, Masayoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2001-03-01

    International Fusion Materials Irradiation Facility (IFMIF) is a proposal of D-Li intense neutron source to cover all aspects of the fusion materials development in the framework of IEA collaboration. The new activity has been started to qualifying the important technical issues called Key Element technology Phase since 2000. Although the neutron spectrum can be adjusted by changing the incident beam energy, it is favorable to be carried out many irradiation tasks at the same time under the unique beam condition. For designing the tailored neutron spectrum, neutron nuclear data for the moderator-reflector materials up to 50 MeV are required. The data for estimating the induced radioactivity is also required to keep the radiation level low enough at maintenance time. The candidate materials and the required accuracy of nuclear data are summarized. (author)

  5. Combined heat and gamma-irradiation treatments for the control of strawberry diseases under market conditions

    International Nuclear Information System (INIS)

    Brodrick, H.T.; Thomas, A.C.; Van Tonder, A.J.; Terblanche, J.C.

    1977-02-01

    The spoilage of strawberries under local market conditions was investigated. It was confirmed that the major losses are due to 'leak' disease caused by Rhizopus stolonifer (Ehr. ex Fr.) Lind. It was also established that further fruit losses in summer are due to anthracnose caused by the fungus Colletotrichum acutatum Simmonds. This is the first time that the latter pathogen has been isolated and identified and recognised as a problem on strawberries in South Africa. Studies with R. stolonifer in culture showed that 46 degrees Celsius for 20 min (the previous international standard heat treatment for fruit) was disappointing, while a treatment at 50 degrees Celsius for 10 min effectively inhibited spore germination. Irradiation studies with cultures of R. stolonifer and C. acutatum showed that a dose of 200 and 100 krad, respectively, resulted in excellent inhibition of spore germination. However, irradiating in nitrogen gas resulted in a tenfold reduction in the effectiveness of the irradiation treatments. The use of nitrogen during irradiation, therefore, cannot be considered, especially where an effective control of the fungal pathogens is desired. Investigations with different cultivars clearly demonstrated the synergistic effect on disease control obtained when combining heat and irradiation treatments. The combination treatment (moist heat at 50-52 degrees Celsius for 10 min plus 200 krad), besides effectively controlling both diseases in strawberries, did not adversely affect berry quality. In simulated transport tests it was shown that a minimal amount of berry softening did occur with this treatment, but this adverse effect was negligible compared with the beneficial effect obtained from disease control. In semi-commercial experiments it was shown that the combination heat and irradiation treatment effectively controlled spoilage diseases for a period of several days from picking, thus allowing sufficient time to market the fruit under local market

  6. Mathematical models in Slowpoke reactor internal irradiation site

    International Nuclear Information System (INIS)

    Raza, J.

    2007-01-01

    The main objective is to build representative mathematical models of neutron activation analysis in a Slowpoke internal irradiation site. Another significant objective is to correct various elements neutron activation analysis measured mass using these models. The neutron flux perturbation is responsible for the measured under-estimation of real masses. We supposed that neutron flux perturbation measurements taken during the Ecole Polytechnique de Montreal Slowpoke reactor first fuel loading were still valid after the second fuelling. .We also supposed that the thermal neutrons spatial and kinetic energies distributions as well as the absorption microscopic cross section dependence on the neutrons kinetic energies were important factors to satisfactorily represent neutron activation analysis results. In addition, we assumed that the neutron flux is isotropic in the laboratory system. We used experimental results from the Slowpoke reactor internal irradiation sites, in order to validate our mathematical models. Our models results are in close agreement with these experimental results..We established an accurate global mathematical correlation of the neutron flux perturbation in function of samples volumes and macroscopic neutron absorption cross sections. It is applicable to sample volumes ranging from 0,1 to 1,3 ml and macroscopic neutron absorption cross section up to 5 moles-b for seven (7) elements with atomic numbers (Z) ranging from 5 to 79. We first came up with a heuristic neutron transport mathematical semi-analytical model, in order to better understand neutrons behaviour in presence of one of several different nuclei samples volumes and mass. In order to well represent the neutron flux perturbation, we combined a neutron transport solution obtained from the spherical harmonics method of a finite cylinder and a mathematical expression combining two cylindrical harmonic functions..With the help of this model and the least squares method, we made extensive

  7. Effect of gamma irradiation on the sensitivities of escherichia coli at deep frozen conditions

    International Nuclear Information System (INIS)

    Takigami, Machiko; Ito, Hitoshi

    1996-01-01

    Phosphate buffer suspensions of three strains of Escherichia coli were irradiated with gamma-rays at room temperature and deep frozen conditions. They were inoculated on MacConkey agar plates to see the comparative sensitivities to the irradiation. Compared to the irradiation at room temperature, the sensitivities of the strains decreased by irradiation at deep frozen conditions. Addition of glycerol to the E. coli suspensions decreased the sensitivities of E. coli to gamma-rays not only at room temperature but also at deep frozen conditions. These phenomena were elucidated by the decrease of production and mobility of OH radicals at deep frozen conditions. (author)

  8. N-Acetyl-L-cysteine protects thyroid cells against DNA damage induced by external and internal irradiation.

    Science.gov (United States)

    Kurashige, Tomomi; Shimamura, Mika; Nagayama, Yuji

    2017-11-01

    We evaluated the effect of the antioxidant N-acetyl-L-cysteine (NAC) on the levels of reactive oxygen species (ROS), DNA double strand breaks (DSB) and micronuclei (MN) induced by internal and external irradiation using a rat thyroid cell line PCCL3. In internal irradiation experiments, ROS and DSB levels increased immediately after 131 I addition and then gradually declined, resulting in very high levels of MN at 24 and 48 h. NAC administration both pre- and also post- 131 I addition suppressed ROS, DSB and MN. In external irradiation experiments with a low dose (0.5 Gy), ROS and DSB increased shortly and could be prevented by NAC administration pre-, but not post-irradiation. In contrast, external irradiation with a high dose (5 Gy) increased ROS and DSB in a bimodal way: ROS and DSB levels increased immediately after irradiation, quickly returned to the basal levels and gradually rose again after >24 h. The second phase was in parallel with an increase in 4-hydroxy-2-nonenal. The number of MN induced by the second wave of ROS/DSB elevations was much higher than that by the first peak. In this situation, NAC administered pre- and post-irradiation comparably suppressed MN induced by a delayed ROS elevation. In conclusion, a prolonged ROS increase during internal irradiation and a delayed ROS increase after external irradiation with a high dose caused serious DNA damage, which were efficiently prevented by NAC. Thus, NAC administration even both after internal or external irradiation prevents ROS increase and eventual DNA damage.

  9. Comparison of material irradiation conditions for fusion, spallation, stripping and fission neutron sources

    International Nuclear Information System (INIS)

    Vladimirov, P.; Moeslang, A.

    2004-01-01

    Selection and development of materials capable of sustaining irradiation conditions expected for a future fusion power reactor remain a big challenge for material scientists. Design of other nuclear facilities either in support of the fusion materials testing program or for other scientific purposes presents a similar problem of irradiation resistant material development. The present study is devoted to an evaluation of the irradiation conditions for IFMIF, ESS, XADS, DEMO and typical fission reactors to provide a basis for comparison of the data obtained for different material investigation programs. The results obtained confirm that no facility, except IFMIF, could fit all user requirements imposed for a facility for simulation of the fusion irradiation conditions

  10. Dose Profiles in ECAL Crystals for Various Irradiation Conditions

    CERN Document Server

    Huhtinen, Mika

    1998-01-01

    Simulated dose profiles in various irradiation and beam test conditions are compared to the expected dose profiles in the ECAL crystals at LHC. Simple front or side irradiations with photons give too steep or too flat dose profiles, respectively. Thus, if dose maxima are fitted to agree, front irradiation underestimate the average dose whereas side irradiations tend to overestimate. Different profiles are difficult to compare reliably, but it seems likely that in both cases the discrepancy is about a factor of 2-3 but in different directions. For most purposes this is likely to be good enough, but should be taken into account in the interpretation of the test results. It is shown that using a customized lead mask between the source and the crystal can significantly improve the agreement between 60 Co side irradiations and the LHC predictions. A 400 MeV/c pion beam incident on a crystal matrix can also reproduce rather well the profiles expected in the barrel ECAL.

  11. Facts about food irradiation. A series of fact sheets from the International Consultative Group on Food Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-12-01

    The safety and benefits of foods processed by ionizing radiation are well documented. In an effort to provide governments, especially those of developing countries, with scientifically accurate information on issues of general interest to the public, the International Consultative Group on Food Irradiation (ICGFI), which was established under the aegis of the Food and Agriculture Organization of the United Nations (FAO), the World Health Organization (WHO), and the IAEA, decided at its 7th Annual Meeting in Rome, Italy, on October 1990, to issue a series of ''Fact Sheets'' on the subject. ICGFI, an inter-governmental body with a membership of 37 governments, has as one of its mandates the function to provide information to Member States of the FAO, WHO, and IAEA and to the three organizations themselves on the safe and proper use of food irradiation technology. The Fact Sheets included here cover issues relating to: status and trends; scientific and technical terms; food irradiation and radioactivity; chemical changes in irradiated food; nutritional quality of irradiated foods; genetic studies; microbiological safety of irradiated food; irradiation and food safety; irradiation and food additives and residues; packaging of irradiated foods; safety of irradiation facilities; controlling the process; food irradiation costs; and irradiated foods and the consumer. The Fact Sheets have been separately indexed and included in the INIS Database under Reference Numbers 23011206-23011217, 23011319 and 23012743. The Fact Sheets were first issued by the ICGFI Secretariat (Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, Vienna, Austria) in May 1991.

  12. Facts about food irradiation. A series of fact sheets from the International Consultative Group on Food Irradiation

    International Nuclear Information System (INIS)

    1991-12-01

    The safety and benefits of foods processed by ionizing radiation are well documented. In an effort to provide governments, especially those of developing countries, with scientifically accurate information on issues of general interest to the public, the International Consultative Group on Food Irradiation (ICGFI), which was established under the aegis of the Food and Agriculture Organization of the United Nations (FAO), the World Health Organization (WHO), and the IAEA, decided at its 7th Annual Meeting in Rome, Italy, on October 1990, to issue a series of ''Fact Sheets'' on the subject. ICGFI, an inter-governmental body with a membership of 37 governments, has as one of its mandates the function to provide information to Member States of the FAO, WHO, and IAEA and to the three organizations themselves on the safe and proper use of food irradiation technology. The Fact Sheets included here cover issues relating to: status and trends; scientific and technical terms; food irradiation and radioactivity; chemical changes in irradiated food; nutritional quality of irradiated foods; genetic studies; microbiological safety of irradiated food; irradiation and food safety; irradiation and food additives and residues; packaging of irradiated foods; safety of irradiation facilities; controlling the process; food irradiation costs; and irradiated foods and the consumer. The Fact Sheets have been separately indexed and included in the INIS Database under Reference Numbers 23011206-23011217, 23011319 and 23012743. The Fact Sheets were first issued by the ICGFI Secretariat (Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, Vienna, Austria) in May 1991

  13. Radiometric ratio characterization for low-to-mid CPV modules operating in variable irradiance conditions

    Science.gov (United States)

    Vorndran, Shelby; Russo, Juan; Zhang, Deming; Gordon, Michael; Kostuk, Raymond

    2012-10-01

    In this work, a concentrating photovoltaic (CPV) design methodology is proposed which aims to maximize system efficiency for a given irradiance condition. In this technique, the acceptance angle of the system is radiometrically matched to the angular spread of the site's average irradiance conditions using a simple geometric ratio. The optical efficiency of CPV systems from flat-plate to high-concentration is plotted at all irradiance conditions. Concentrator systems are measured outdoors in various irradiance conditions to test the methodology. This modeling technique is valuable at the design stage to determine the ideal level of concentration for a CPV module. It requires only two inputs: the acceptance angle profile of the system and the site's average direct and diffuse irradiance fractions. Acceptance angle can be determined by raytracing or testing a fabricated prototype in the lab with a solar simulator. The average irradiance conditions can be found in the Typical Metrological Year (TMY3) database. Additionally, the information gained from this technique can be used to determine tracking tolerance, quantify power loss during an isolated weather event, and do more sophisticated analysis such as I-V curve simulation.

  14. Microstructural defects in EUROFER 97 after different neutron irradiation conditions

    Directory of Open Access Journals (Sweden)

    Christian Dethloff

    2016-12-01

    Full Text Available Characterization of irradiation induced microstructural evolution is essential for assessing the applicability of structural steels like the Reduced Activation Ferritic/Martensitic steel EUROFER 97 in upcoming fusion reactors. In this work Transmission Electron Microscopy (TEM is used to determine the defect microstructure after different neutron irradiation conditions. In particular dislocation loops, voids and precipitates are analyzed concerning defect nature, density and size distribution after irradiation to 15 dpa at 300 °C in the mixed spectrum High Flux Reactor (HFR. New results are combined with previously obtained data from irradiation in the fast spectrum BOR-60 reactor (15 and 32 dpa, 330 °C, which allows for assessment of dose and dose rate effects on the aforementioned irradiation induced defects and microstructural characteristics.

  15. Rupture of an internal carotid artery pseudoaneurysm after irradiation for a nasopharyngeal carcinoma. Case report

    International Nuclear Information System (INIS)

    Hanada, Yukiko; Nakamura, Megumi; Sasai, Hisanori; Kamakura, Aya; Sakata, Yoshiharu; Miyahara, Hiroshi

    2013-01-01

    The primary treatment of nasopharyngeal carcinoma (NPC) has been external radiotherapy. Rupture of an internal carotid artery (ICA) pseudoaneurysm is a rare complication of irradiation therapy for a nasopharyngeal carcinoma. A 78 years old man had a history of NPC treated with radiotherapy in 1993. He was admitted to the hospital because of epistaxis. Angiography showed an ICA pseudoaneurysm pointing medially to the nasopharynx. Coil embolization of the ICA was performed, but cerebral infarction occurred. Internal carotid artery (ICA) pseudoaneurysms are an uncommon but potentially lethal condition. Angiography is the mainstay of diagnosis of the aneurysm and planning the embolization of the ICA. We should be more aware of this complication in NPC patients. (author)

  16. Study of I11-conditioning of Linac stereotactic irradiation subspaces using singular values decomposition analysis

    International Nuclear Information System (INIS)

    Platoni, K.; Lefkopoulos, D.; Grandjean, P.; Schlienger, M.

    1999-01-01

    A Linac sterotactic irradiation space is characterized by different angular separations of beams because of the geometry of the stereotactic irradiation. The regions of the stereotactic space characterized by low angular separations are one of the causes of ill-conditioning of the stereotactic irradiation inverse problem. The singular value decomposition (SVD) is a powerful mathematical analysis that permits the measurement of the ill-conditioning of the stereotactic irradiation problem. This study examines the ill-conditioning of the stereotactic irradiation space, provoked by the different angular separations of beams, using the SVD analysis. We subdivided the maximum irradiation space (MIS: (AA) AP x (AA) RL =180 x 180 ) into irradiation subspaces (ISSs), each characterized by its own angular separation. We studied the influence of ISSs on the SVD analysis and the evolution of the reconstruction quality of well defined three-dimensional dose matrices in each configuration. The more the ISS is characterized by low angular separation the more the condition number and the reconstruction inaccuracy are increased. Based on the above results we created two reduced irradiation spaces (RIS: (AA) AP x (AA) RL =180 x 140 and (AA) AP x (AA) RL =180 x 120 ) and compared the reconstruction quality of the RISs with respect to the MIS. The more an irradiation space is free of low angular separations the more the irradiation space contains useful singular components. (orig.)

  17. Hemostimulating efficiency of non-steroid anti-inflammatory drugs under modified irradiation conditions

    International Nuclear Information System (INIS)

    Zhvoronkov, L.P.; Sklobovskaya, I.Eh.

    1988-01-01

    Non-steroid anti-inflammatory drugs (NSAID) were found to have hemostimulating effect in mice after irradiation. This effect was rather definite under irradiation conditions modified by dose fractioning or radioprotective chemicals. NSAID application during fractionated irradiation with midlethal integral dose leads to almost complete recovery of bone marrow hemopoiesis by the 9th day of radiation illness. NSAID usage combined with chemical radioprotectors provides effective hemopoiesis stimulation leading to survival increase in animals, irradiated with absolutely lethal doses. (author)

  18. Low cycle fatigue of irradiated LMFBR materials

    International Nuclear Information System (INIS)

    Blackburn, L.D.

    1976-01-01

    A review of low cycle fatigue data on irradiated LMFBR materials was conducted and extensive graphical representations of available data are presented. Representative postirradiation tensile properties of annealed 304 and 316 SS are selected and employed in several predictive methods to estimate irradiated material fatigue curves. Experimental fatigue data confirm the use of predictive methods for establishing conservative design curves over the range of service conditions relevant to such CRBRP components as core former, fixed radial shielding, core barrel, lower inlet module and upper internals structures. New experimental data on fatigue curves and creep-fatigue interaction in irradiated 20 percent cold worked (CW) 316 SS and Alloy 718 would support the design of removable radial shielding and upper internals in CRBRP. New experimental information on notched fatigue behavior and cyclic stress-strain curves of all these materials in the irradiated condition could provide significant design data

  19. Storage pool water condition of multipurpose compact 60Co irradiator of IPEN-CNEN/SP

    International Nuclear Information System (INIS)

    Kodama, Yasko; Rela, Paulo R.

    2008-01-01

    A new type compact gamma irradiator was developed and installed at IPEN-CNEN/SP, it is classified as category IV irradiator according to International Atomic Energy Agency-IAEA. The originality of its design remains on the rotating concrete door, which integrates the shielding system with the product handling system, permitting the input and output of the products in a continuous way, without the necessity to lower the sources and open the irradiator chamber to change the batch. The licensed capacity of this irradiator is 37 P Bq (1 MCi) and the water pool liner, manufactured in stainless steel, has 7.0 m deep and 2.7 m diameter. A sealed radiation source may be defined as a quantity of radioactive material sealed within non-radioactive material, which the confining barrier is intended to prevent leakage or escape of the radioactive material under normal handling conditions and also under foreseeable mishaps. The use of cobalt-60 radiation sources in a wet storage environment requires care in the control of that environment to avoid the potential for deterioration of the stainless steel. In the literature, the tests performed demonstrated that stainless steel had excellent performance under controlled environment conditions. The inspection includes assessing the condition of storage pool water and measuring the pool water conductivity. The demineralized water normally used in storage pools is usually an effective and secure medium in which to store stainless steel. However, there are certain constituents and contaminants in the water which can affect this behaviour. For instance, the pH has a small but definite effect on the tendency for pitting corrosion. Nevertheless, there is also evidence that both strongly alkaline and strongly acid environments can encourage pitting corrosion. In general, an around neutral pH is recommended. The conductivity is used as a measure of the extent to which ionic species are present in the pool water. International recommendations

  20. Solar irradiance forecasting at one-minute intervals for different sky conditions using sky camera images

    International Nuclear Information System (INIS)

    Alonso-Montesinos, J.; Batlles, F.J.; Portillo, C.

    2015-01-01

    Highlights: • The solar resource has been predicted for three hours at 1-min intervals. • Digital image levels and cloud motion vectors are joint for irradiance forecasting. • The three radiation components have been predicted under different sky conditions. • Diffuse and global radiation has an nRMSE value around 10% in all sky conditions. • Beam irradiance is predicted with an nRMSE value of about 15% in overcast skies. - Abstract: In the search for new techniques to predict atmospheric features that might be useful to solar power plant operators, we have carried out solar irradiance forecasting using emerging sky camera technology. Digital image levels are converted into irradiances and then the maximum cross-correlation method is applied to obtain future predictions. This methodology is a step forward in the study of the solar resource, essential to solar plant operators in adapting a plant’s operating procedures to atmospheric conditions and to improve electricity generation. The results are set out using different statistical parameters, in which beam, diffuse and global irradiances give a constant normalized root-mean-square error value over the time interval for all sky conditions. The average measure is 25.44% for beam irradiance; 11.60% for diffuse irradiance and 11.17% for global irradiance.

  1. Experiences of an international trade action with irradiated onions between GDR and Hungary

    International Nuclear Information System (INIS)

    Zachariev, G.; Kiss, I.; Luther, T.; Huebner, G.; Doellstaedt, R.

    1988-01-01

    Extensive work has been carried out in the field of food irradiation in the GDR and Hungary in recent years. The irradiation of onions for sprout inhibition has reached a commercial stage in the GDR of more than 5,000 tons in 1986. The export of onions is the first example of international trade in irradiated food between socialist countries. Experiences of this trade is presented in the paper. Results of quality control of the bulbs (losses in weight an quality) after an intermediate storage period are discussed. Hungarian consumer reactions to irradiated onions is also evaluated. (author)

  2. Effects of gamma Rays Irradiation on resistance of Pseudomonas aeruginosa in various condition

    International Nuclear Information System (INIS)

    Nikham

    2002-01-01

    The investigation of gamma tays 60Co irradiation effect on resistance of bacteri P.aeruginosa has been done.The objective of the research was to know the D10 value of bacteria P.aeruginosa. By using of distilled water,talc and peanut powder as carrier in dry,wet,O 2 and N 2 condition the bacteria of P.aeruginosa were irradiated on gamma rays of 6 0Co with dose of O to 2.5 kGy,and with dose rate of 5 and 10 kGy/h.After irradiation the bacteria of P. aeruginosa were cultured in media of the Tryptone Soya Agar and incubatedat temperature of 32±2 o C for 3 days. The survival colonies were calculated,and the data were used to make the curve and to determine the D10 value. The results of the experiments showed that D10 value of irradiated bacteria of P.aeruginosain the disitilled water,talc and peanut powder as carrier were not high significant.Nevertheless the D10 value of the irradiated at dose rate 10kGy/h show more higher tendency than at dose rate 5kGy/h. The D10 value of irradiated bacteria in the N2 condition was higher,if compared with in the O2 condition

  3. Internal friction measurements of Mo after low-temperature proton irradiation

    International Nuclear Information System (INIS)

    Tanimoto, H.; Mizubayashi, H.; Masuda, R.; Okuda, S.; Tagishi, Y.

    1992-01-01

    Internal friction measurements are performed in Mo after 20 MeV proton irradiation in order to clarify the behavior of self-interstitial atoms (SIA's) in Mo. In the low dose range, strong dislocation pinning suggesting the free migration of defects is observed at about 40 K and weak pinning at about 25 K. The features are very similar to those reported after neutron irradiation except that the 25 K pinning is much smaller after proton irradiation. The result suggests that the migration of free SIA's is responsible for the 40 K pinning and that of SIA-defect clusters, probably di-SIA's, formed during irradiation for the 25 K pinning. In the high dose range, the relaxation peaks are observed at about 13 and 41 K, where the close similarities are found between the present peaks and the corresponding peaks reported after neutron irradiation except that the peak height of the 41 K peak per unit concentration of Frenkel pairs (FP) tends to increase strongly with decreasing dose here. The latter fact suggests the strong interaction between SIA's. Then the smallness of the 41 K peak reported after electron irradiation with very high dose could be explained by an increased interaction between SIA's, but not by the two-dimensional migration of SIA's as proposed by Jacques and Robrock. Deformation given prior to irradiation causes a drastic decrease in the modulus defects associated with FP's (so-called bulk effect) and in the 13 K peak height. After neutron irradiation, no such effect of deformation was reported. A possible origin for this difference is discussed. (orig.)

  4. Oxygen sensitization of mammalian cells under different irradiation conditions

    International Nuclear Information System (INIS)

    Ling, C.C.; Michaels, H.B.; Gerweck, L.E.; Epp, E.R.; Peterson, E.C.

    1981-01-01

    The oxygen dependence of the radiosensitivity of cultured CHO cells was examined in detail with particular attention paid to avoiding possible artifacts due to radiolytic oxygen depletion. Two methods of gas equilibration and irradiation were used. In the first approach, cells were irradiated with 50-kVp X rays in a thin-layer geometry which offered maximum interchange between the cells and the surrounding gas. The second technique employed 280-kVp X irradiation of cells under full-medium conditions with mechanical agitation to minimize the effect of radiochemical oxygen consumption by promoting rapid oxygen replenishment. With these techniques oxygen radiosensitization was clearly resolved at an oxygen concentration of 0.03% in the gas phase. The oxygen K curves measured by these two methods were similar in shape over a wide range of oxygen concentration

  5. International standardization of instruments for neutron irradiation tests

    International Nuclear Information System (INIS)

    Tanimoto, Masataka; Shibata, Akira; Nakamura, Jinichi; Tsuchiya, Kunihiko; Cho, M.; Lee, C.; Park, S.; Choo, K.

    2012-01-01

    The JMTR in JAEA and HANARO in KAERI are the foremost testing/research reactors in the world and these are expected to contribute to many nuclear fields. As a part of instrument development in irradiation field, information exchange of instruments started from 2010 under the cooperation agreements between KAERI and JAEA. The instruments developed in JMTR and HANARO are introduced and cooperation experiments as future plan are discussed for international standardization. (author)

  6. Effects of Si3+ and H+ Irradiation on Tungsten Evaluated by Internal Friction Method

    International Nuclear Information System (INIS)

    Hu Jing; Wang Xianping; Fang Qianfeng; Liu Changsong; Zhang Yanwen; Zhao Ziqiang

    2013-01-01

    Effects of Si 3+ and H + irradiation on tungsten were investigated by internal friction (IF) technique. Scanning electron microscope (SEM) analysis revealed that sequential dual Si+H irradiation resulted in more serious damage than single Si irradiation. After irradiation, the IF background was significantly enhanced. Besides, two obvious IF peaks were initially found in temperature range of 70∼330 K in the sequential Si+H irradiated tungsten sample. The mechanism of increased IF background for the irradiated samples was suggested to originate from the high density dislocations induced by ion irradiation. On the other hand, the relaxation peak P L and non-relaxation peak P H in the Si+H irradiated sample were ascribed to the interaction process of hydrogen atoms with mobile dislocations and transient processes of hydrogen redistribution, respectively. The obtained experimental results verified the high sensitivity of IF method on the irradiation damage behaviors in nuclear materials

  7. Conditions of viscosity measurement for detecting irradiated peppers

    International Nuclear Information System (INIS)

    Hayashi, Toru; Todoriki, Setsuko; Okadome, Hiroshi; Kohyama, Kaoru

    1995-01-01

    Viscosity of gelatinized suspensions of black and white peppers decreased depending upon dose. The viscosity was influenced by gelatinization and viscosity measurement conditions. The difference between unirradiated pepper and an irradiated one was larger at a higher pH and temperature for gelatinization. A viscosity parameter normalized with the starch content of pepper sample and the viscosity of a 5% suspension of corn starch could get rid of the influence of the conditions for viscosity measurement such as type of viscometer, shear rate and temperature. (author)

  8. Effect of irradiation in design of LMFBR internals

    International Nuclear Information System (INIS)

    Tavassoli, A.A.; Cowan, A.; Vries, M. de; Heesen, E.

    1990-01-01

    Internal structures of nuclear power reactors are essentially made with the austenitic stainless steels Types 304L and 316L. In service these structures receive low to moderate neutron doses. In this paper, the work undertaken by the European Fast Breeder Working Group is reviewed. Conclusions drawn to this date are presented and tentative reduction factors to be used in design are discussed in terms of the number of displacements per atom (dpa) and the quantity of helium generated in the steel (appm He). For the lower core structure which operates at about 400 0 C existing design rules can be used for parts which are subjected to less than 2 dpa despite a reduction in ductility and toughness which occurs above about 0.8 dpa. For the above core structure which operates at about 550 0 C interim and rather conservative stress reduction factors are proposed which can become effective at helium levels as low as 10 -4 appm. Particular attention is paid to: - irradiation temperature, - neutron flux and fluence, - steel type and grade, - heat treatment and boron distribution, - weld metal composition and procedure (TIG,MMA,...), to ensure that service conditions are represented as closely as possible

  9. IFMIF - International Fusion Materials Irradiation Facility Conceptual Design Activity/Interim Report

    International Nuclear Information System (INIS)

    Rennich, M.J.

    1995-12-01

    Environmental acceptability, safety, and economic viability win ultimately be the keys to the widespread introduction of fusion power. This will entail the development of radiation- resistant and low- activation materials. These low-activation materials must also survive exposure to damage from neutrons having an energy spectrum peaked near 14 MeV with annual radiation doses in the range of 20 displacements per atom (dpa). Testing of candidate materials, therefore, requires a high-flux source of high energy neutrons. The problem is that there is currently no high-flux source of neutrons in the energy range above a few MeV. The goal, is therefore, to provide an irradiation facility for use by fusion material scientists in the search for low-activation and damage-resistant materials. An accellerator-based neutron source has been established through a number of international studies and workshops' as an essential step for materials development and testing. The mission of the International Fusion Materials Irradiation Facility (IFMIF) is to provide an accelerator-based, deuterium-lithium (D-Li) neutron source to produce high energy neutrons at sufficient intensity and irradiation volume to test samples of candidate materials up to about a full lifetime of anticipated use in fusion energy reactors. would also provide calibration and validation of data from fission reactor and other accelerator-based irradiation tests. It would generate material- specific activation and radiological properties data, and support the analysis of materials for use in safety, maintenance, recycling, decommissioning, and waste disposal systems

  10. Biosorption of the strontium ion by irradiated Saccharomyces cerevisiae under culture conditions.

    Science.gov (United States)

    Qiu, Liang; Feng, Jundong; Dai, Yaodong; Chang, Shuquan

    2017-06-01

    As a new-emerging method for strontium disposal, biosorption has shown advantages such as high sorption capacity; low cost. In this study, we investigated the potential of Saccharomyces cerevisiae (S. cerevisiae) in strontium disposal under culture conditions and the effects of irradiation on their biosorption capabilities. We found that S. cerevisiae can survive irradiation and grow. Pre-exposure to irradiation rendered S. cerevisiae resistant to further irradiation. Surprisingly, the pre-exposure to irradiation can increase the biosorption capability of S. cerevisiae. We further investigated the factors that influenced the biosorption efficiency, which were (strongest to weakest): pH > strontium concentration > time > temperature. In our orthogonal experiment, the optimal conditions for strontium biosorption by irradiated S. cerevisiae were: pH 7, 150 mg L -1 strontium at the temperature of 32 °C with 30 h. The equilibrium of strontium biosorption was analyzed by Langmuir and Freundlich models, from which the formal model is found to provide a better fit for the experimental results. The kinetics of strontium biosorption by living irradiated S. cerevisiae was found to be comprised of three phases: dramatically increased during 0-9 h, decreased during 12-24 h, and increased during 30-50 h. These results provide a systematic understanding of the biosorption capabilities of irradiated S. cerevisiae, which can contribute to the development of remediating nuclear waste water. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. INVESTIGATION OF NONAXISYMMETRIC STRESS STATE FOR QUASI-STATIC THERMAL POWER LOADING UNDER CONDITIONS OF HIGHEST-ENERGY PARTICLE IRRADIATION

    Directory of Open Access Journals (Sweden)

    A. V. Chigarev

    2013-01-01

    Full Text Available The paper contains a virtual modeling 2D(r, θ for deformation of singly-connected cylindrical solid under conditions of thermo-irradiation impact. Influence of a circumferential distortion on nonaxisymmetric strain-stress state for various values of temperature amplitudes has been investigated in the paper. A solid cylinder  with internal heat sources has been considered as a model body. Properties of the model body correspond to cermet fuel (40 % UO2 + 60 % Cr. 

  12. Study and simulation of irradiated zirconium alloys fracture under type RIA accidental loading conditions; Comprehension et modelisation de la rupture d'alliages de zirconium irradies en conditions accidentelles de type RIA

    Energy Technology Data Exchange (ETDEWEB)

    Le Saux, M. [CEA Saclay, Dept. des Materiaux pour le Nucleaire (DEN/DANS/DMN/SEMI), 91 - Gif-sur-Yvette (France)

    2008-07-01

    The thesis aims to study and simulate the mechanical behavior under Reactivity Initiated Accident loading conditions, of the Zircaloy 4 fuel claddings, irradiated or not. It also aims to characterize and simulate the behavior and the fracture under RIA loading conditions of hydrided Zircaloy 4 non irradiated. This study proposes an experimental approach and a simulation. (A.L.B.)

  13. Reconstruction of boundary conditions from internal conditions using viability theory

    KAUST Repository

    Hofleitner, Aude; Claudel, Christian G.; Bayen, Alexandre M.

    2012-01-01

    This article presents a method for reconstructing downstream boundary conditions to a HamiltonJacobi partial differential equation for which initial and upstream boundary conditions are prescribed as piecewise affine functions and an internal condition is prescribed as an affine function. Based on viability theory, we reconstruct the downstream boundary condition such that the solution of the Hamilton-Jacobi equation with the prescribed initial and upstream conditions and reconstructed downstream boundary condition satisfies the internal value condition. This work has important applications for estimation in flow networks with unknown capacity reductions. It is applied to urban traffic, to reconstruct signal timings and temporary capacity reductions at intersections, using Lagrangian sensing such as GPS devices onboard vehicles.

  14. Reconstruction of boundary conditions from internal conditions using viability theory

    KAUST Repository

    Hofleitner, Aude

    2012-06-01

    This article presents a method for reconstructing downstream boundary conditions to a HamiltonJacobi partial differential equation for which initial and upstream boundary conditions are prescribed as piecewise affine functions and an internal condition is prescribed as an affine function. Based on viability theory, we reconstruct the downstream boundary condition such that the solution of the Hamilton-Jacobi equation with the prescribed initial and upstream conditions and reconstructed downstream boundary condition satisfies the internal value condition. This work has important applications for estimation in flow networks with unknown capacity reductions. It is applied to urban traffic, to reconstruct signal timings and temporary capacity reductions at intersections, using Lagrangian sensing such as GPS devices onboard vehicles.

  15. Early radiation changes of normal dog brain following internal and external brain irradiation: A preliminary report

    International Nuclear Information System (INIS)

    Chin, H.; Maruyama, Y.; Markesbery, W.; Goldstein, S.; Wang, P.; Tibbs, P.; Young, B.; Feola, J.; Beach, L.

    1984-01-01

    To examine radiation-induced changes in the normal brain, internal or external radiation was given to normal dog brain. Seven medium-sized dogs were used in this study. Two dogs were controls and an ice-pick (plastic implant applicator) was placed in the right frontal lobe for about 5 hours but no irradiation. Two dogs underwent Cs-137 brain implantation for 4 and 5 hours, respectively using an ice-pick technique. Two dogs were given internal neutron irradiation using the same technique of intracerebral ice-pick brachytherapy. One dog received an external photon irradiation using 6-Mev Linear Accelerator. Postmortem microscopic examination was made to study the early cerebral changes to irradiation in three dogs: one control with no irradiation; one received intracerebral Cesium implantation; and one external photon irradiation. Vascular change was the most prominent microscopic finding. There were hemorrhage, endothelial proliferation and fibrinoid changes of small vessel wall. Most of the changes were localized in the white matter and the cortex remained intact. Details (CT, NMR and histological studies) are discussed

  16. Microstructural characterization and model of hardening for the irradiated austenitic stainless steels of the internals of pressurized water reactors; Caracterisation microstructurale et modelisation du durcissement des aciers austenitiques irradies des structures internes des reacteurs a eau pressurisee

    Energy Technology Data Exchange (ETDEWEB)

    Pokor, C

    2003-07-01

    The core internals of Pressurized Water Reactors (PWR) are composed of SA 304 stainless steel plates and CW 316 stainless steel bolts. These internals undergo a neutron flux at a temperature between 280 deg C and 380 deg C which modifies their mechanical properties. These modifications are due to the changes in the microstructure of these materials under irradiation which depend on flux, dose and irradiation temperature. We have studied, by Transmission Electron Microscopy, the microstructure of stainless steels SA 304, CW 316 and CW 316Ti irradiated in a mixed flux reactor (OSIRIS at 330 deg C between 0,8 dpa et 3,4 dpa) and in a fast breeder reactor at 330 deg C (BOR-60) up to doses of 40 dpa. Moreover, samples have been irradiated at 375 deg C in a fast breeder reactor (EBR-II) up to doses of 10 dpa. The microstructure of the irradiated stainless steels consists in faulted Frank dislocation loops in the [111] planes of austenitic, with a Burgers vector of [111]. It is possible to find some voids in the solution annealed samples irradiated at 375 deg C. The evolution of the dislocations loops and voids has been simulated with a 'cluster dynamic' model. The fit of the model parameters has allowed us to have a quantitative description of our experimental results. This description of the microstructure after irradiation was coupled together with a hardening model by Frank loops that has permitted us to make a quantitative description of the hardening of SA 304, CW 316 and CW 316Ti stainless steels after irradiation at a certain dose, flux and temperature. The irradiation doses studied grow up to 90 dpa, dose of the end of life of PWR internals. (author)

  17. Status and possible prospects of an international fusion materials irradiation facility

    International Nuclear Information System (INIS)

    Cozzani, F.

    1999-01-01

    Structural materials for future DT fusion power reactors will have to operate under intense neutron fields with energies up to 14 MeV and fluences in the order of 2 MW/m 2 per year. As environmental acceptability, safety considerations and economic viability will be ultimately the keys to the widespread introduction of fusion power, the development of radiation-resistant and low activation materials would contribute significantly to fusion development. For this purpose, testing of materials under irradiation conditions close to those expected in a fusion power station would require the availability, in an appropriate time framework, of an intense, high-energy neutron source. Recent advances in linear accelerator technology, in small specimens testing technology, and in the comprehension of damage phenomena, lead to the conclusion that an accelerator-based D-Li neutron source, with beam energy variability, would provide the most realistic option for a fusion materials testing facility. Under the auspices of the IEA, an international effort (EU, Japan, US, RF) to carry out the conceptual design activities (CDA) of an international fusion materials irradiation facility (IFMIF), based on the D-Li concept, have been carried out successfully. A final conceptual design report was produced at the end of 1996. A phase of conceptual design evaluation (CDE), presently underway, is extending and further refining some of the conceptual design details of IFMIF. The results indicate that an IFMIF-class installation would be technically feasible and could meet its mission objectives. However, a suitable phase of Engineering Validation, to carry out some complementary R and D and prototyping, would still be needed to resolve a few key technical uncertainties before the possibility to proceed toward detailed design and construction could be explored. (orig.)

  18. Low temperature internal friction on γ-irradiated polyvinylidene fluoride (PVDF)

    International Nuclear Information System (INIS)

    Callens, A.; Eersels, L.; De Batist, R.

    1978-01-01

    A least-squares fitting of the below room temperature part of the internal friction spectra, obtained by the torsion pendulum technique on as-received and γ-irradiated (up to 1 Grad) strips and fibres of polyvinylidene fluoride by a superposition of single Debye functions, reveals that the spectral component features are determined not only by purely amorphous chain characteristics but also by the dose-dependence of crystallinity. A careful analysis of the relaxation spectra confirms that at least one relaxation effect (approximately 236 K) is created upon irradiation. The analysis of the dose dependence of the characteristics of the β (glass transition; approximately 220 K) and βsub(u) (apparent upper glass transition; approximately 270 K) relaxations, suggests the probable influence of crystallinity on the molecular motion in the amorphous phase. The increase of the intensity of the γ relaxation (approximately 190 K) is related to the irradiation-induced crystallite degradation. (author)

  19. Internal friction study of neutron-irradiation effects on an amorphous Cu40Ti60 alloy

    International Nuclear Information System (INIS)

    Dong, Y.; Wu, G.; Xiao, K.; Li, X.; He, Y.

    1988-01-01

    Effects of neutron irradiation on the structure of an amorphous Cu 40 Ti 60 alloy have been studied by internal friction measurements. After irradiation, the position of the first internal friction peak remains almost unchanged and the shoulder position shifts towards a higher temperature by about 5 K, which indicates that the Cu 40 Ti 60 glass becomes more stable. These results are finally discussed based on the concept of changes of chemical short-range ordering and geometrical short-range ordering due to radiation damage

  20. The significance of neuroendocrine system state in estimation of nonstochastic effects of small doses of internal irradiation. (An experimental study)

    International Nuclear Information System (INIS)

    Dedov, V.I.; Norets, T.A.; Stepanenko, V.F.; Dedenkov, A.N.

    1987-01-01

    Data on long-term complex investigations of nonstochastic effects of low doses of internal irradiation on the level of a whole organism are presented. Experiments have been carried out with mongrel rats of both sexes and different ages up to the moment of introduction of radioactive compounds. Action of relatively and uniformly distributing in the organism radiactive compounds of selenium - 75 and sulfur - 35, which were introduced once intravenously in quantities forming absorbed doses in average on the whole body and ovaries (0.5 Gy), on endocrine glands and critical organs (up to 1.0 Gy) has been used as models of internal radiation. Data, testifying to the fact that the neuroendocrinal system, despite the existing opinion, is sensitive to action of low doses of internal irradiation compared with the recommended one as an ultimate permissible one for nonstochastic effects ( 0.5 Sv), that permits to suggest for using factors of the functional state of the neuroendocrine system as an informative and sensitive criterium of estimation of biological action of low doses of internal radiation, have been obtained. These factors along with doses on critical organs permit to estimate the degree of dangerous action of different radionuclides on the organism level. Dynamic studying of activity factors of the neuroendocrine system with simultaneous analysis of the state of harmonically dependent processes permits to estimate functional possibilities of irradiated organism, its viability, especially under conditions requiring increased stress, as well as to take into account such factors modifying a biological effect as age, animal sex, the character of absorbed dose distribution

  1. Dynamics of a stabilized motor defense conditioned reflex at different levels of motivation in irradiated rats

    Energy Technology Data Exchange (ETDEWEB)

    Shtemberg, A S

    1982-05-01

    Postradiation dynamics of strengthened motor-defense conditioned reflex in rats-males irradiated with the doses of 94.111 and 137 Gy was studied. Phase disturbances of conditioned-reflex activity increased with enhancing irradiation dose have been revealed. Rapid recovery of conditioned reflex after short primary aggravation was a characteristic peculiarity. At that, the dynamics of relation of main nervous processes in cortex was noted for significant instability increasing with radiation syndrome development. Enhancement of force of electro-defense support promoted more effective strengthening of temporary connections and conditioned high stability of trained-reflex reactions during serious functional disturbances resulted from sublethal dose irradiation.

  2. Behavior of pre-irradiated fuel under a simulated RIA condition

    International Nuclear Information System (INIS)

    Fuketa, Toyoshi; Sasajima, Hideo; Mori, Yukihide

    1994-07-01

    This report presents results from the power burst experiment with pre-irradiated fuel rod, Test JM-3, conducted in the Nuclear Safety Research Reactor (NSSR). The data concerning test method, pre-irradiation, pre-pulse fuel examination, pulse irradiation, transient records and post-pulse fuel examination are described, and analyses, interpretations, and discussions of the results are presented. Preceding to the pulse irradiation in the NSRR, test fuel rod was irradiated in the Japan Materials Testing Reactor (JMTR) up to a fuel burnup of 19.6MWd/kgU with average linear heat rate of 25.3 kW/m. The fuel rod was subjected to the pulse irradiation resulting in a deposited energy of 174±6 cal/g·fuel and a peak fuel enthalpy of 130±5 cal/g·fuel under stagnant water cooling condition at atmospheric pressure and ambient temperature. Test fuel rod behavior was assessed from pre- and post-pulse fuel examinations and transient records during the pulse. The cladding surface temperature increased to only 150degC, and the test resulted in slight fuel deformation and no fuel failure. An estimated rod-average fission gas release during the transient was about 2.2%. Through the detailed fuel examinations, the information concerning microstructural change in the fuel pellets were also obtained. (author)

  3. IFMIF : International Fusion Materials Irradiation Facility Conceptual Design Activity: Final report

    International Nuclear Information System (INIS)

    Martone, M.

    1997-01-01

    This report documents the results of the Conceptual Design Activity (CDA) on the International Fusion Materials Irradiation Facility (IFMIF), conducted during 1995 and 1996. The activity is under the auspices of the International Energy Agency (IEA) Implementing Agreement for a Programme of Research and Development on Fusion Materials. An IEA Fusion Materials Executive Subcommittee was charged with overseeing the IFMIF-CDA work. Participants in the CDA are the European Union, Japan, and the United States, with the Russian Federation as an associate member

  4. IFMIF : International Fusion Materials Irradiation Facility Conceptual Design Activity: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Martone, M [ENEA, Centro Ricerche Frascati, Rome (Italy)

    1997-01-01

    This report documents the results of the Conceptual Design Activity (CDA) on the International Fusion Materials Irradiation Facility (IFMIF), conducted during 1995 and 1996. The activity is under the auspices of the International Energy Agency (IEA) Implementing Agreement for a Programme of Research and Development on Fusion Materials. An IEA Fusion Materials Executive Subcommittee was charged with overseeing the IFMIF-CDA work. Participants in the CDA are the European Union, Japan, and the United States, with the Russian Federation as an associate member.

  5. Irradiation experiments on materials for core internals, pressure vessel and fuel cladding

    Energy Technology Data Exchange (ETDEWEB)

    Tsukada, Takashi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-03-01

    Materials degradation due to the aging phenomena is one of the key issues for the life assessment and extension of the light water reactors (LWRs). This presentation introduces JAERI`s activities in the field of LWR material researches which utilize the research and testing reactors for irradiation experiments. The activities are including the material studies for the core internals, pressure vessel and fuel cladding. These materials are exposed to the neutron/gamma radiation and high temperature water environments so that it is worth reviewing their degradation phenomena as the continuum. Three topics are presented; For the core internal materials, the irradiation assisted stress corrosion cracking (IASCC) of austenitic stainless steels is the present major concern. At JAERI the effects of alloying elements on IASCC have been investigated through the post-irradiation stress corrosion cracking tests in high-temperature water. The radiation embrittlement of pressure vessel steels is still a significant issue for LWR safety, and at JAERI some factors affecting the embrittlement behavior such as a dose rate have been investigated. Waterside corrosion of Zircaloy fuel cladding is one of the limiting factors in fuel rod performance and an in-situ measurement of the corrosion rate in high-temperature water was performed in JMTR. To improve the reliability of experiments and to extent the applicability of experimental techniques, a mutual utilization of the technical achievements in those irradiation experiments is desired. (author)

  6. Effect of parenteral nutrition on the bone marrow recovery under exsperimental conditions of uneven irradiation

    International Nuclear Information System (INIS)

    Moroz, B.B.; Fedorovskij, L.L.; Deshevoj, Yu.B.

    1986-01-01

    Using white rats-males the effect of parenteral nutrition (PN) on blood formation (hemopoiesis) recovery under the conditions of total (control), subtotal (shielding of animal hind limb) with 7.5 Gy and X-ray partial irradiation of abdomen region with the 13.5 Gy has been studied. It has been found that bone marrow recovery increases either at subtotal or partial irradiation under the conditions of PN. Mechanisms of PN favourable effect are discussed. The advisability of using PN under uneven irradiations of organism is indicated

  7. Sensory quality of irradiated onion and garlic bulbs

    International Nuclear Information System (INIS)

    Curzio, O.A.; Urioste, A.M.

    1994-01-01

    The radioinhibition process has shown to prolong shelf-life of ''Valenciana sintetica 14'' onion variety and ''Colorado'' garlic variety. Sensory attributes of the irradiated bulbs were tested monthly by trained judges during extended storage in warehouse conditions (6-32C, R.H. 40-50%). The sensory properties observed were external and internal appearance, firmness and odor. The irradiated bulbs were judged to be superior in quality with respect to internal and external appearance (p 0.01) and firmness (p 0.01), after 180 days postharvest. The irradiated bulbs showed no difference in odor (p 0.05), when compared to unirradiated ones, through the storage period

  8. Relaxation behavior of radicals produced in irradiated black pepper under various moisture conditions by ESR

    International Nuclear Information System (INIS)

    Kameya, Hiromi; Kawauchi, Risa; Shimoyama, Yuhei; Kaeda, Yoko; Ogawa, Satoko; Nakamura, Hideo; Ukai, Mitsuko

    2008-01-01

    Black pepper is easy to be contaminated by microorganism and often processed to γ-irradiation. ESR has been used for the detection of radicals induced in irradiated spices. Using ESR, we revealed the effects of moisture condition during storage of irradiated black pepper on the saturation behavior of ESR signal. The ESR spectrum of black pepper consists of a broad sextet centered at g=2.0, a singlet as same g-value and a singlet at g=4.0. The irradiation causes two new signals, one is the strong and sharp singlet signal at g=2.0 and the other is the side signal. We found that the signal intensity originated by the radicals of black pepper with and without radiation decayed in the high humidity condition during storage. The ESR signal intensity of irradiated black pepper decayed during storage and showed almost the same intensity level as that of non-irradiated black pepper during storage. (author)

  9. Fuel irradiation experience at Halden

    International Nuclear Information System (INIS)

    Vitanza, Carlo

    1996-01-01

    The OECD Halden Reactor Project is an international organisation devoted to improved safety and reliability of nuclear power station through an user-oriented experimental programme. A significant part of this programme consists of studies addressing fuel performance issues in a range of conditions realised in specialised irradiation. The key element of the irradiation carried out in the Halden reactor is the ability to monitor fuel performance parameters by means of in-pile instrumentation. The paper reviews some of the irradiation rigs and the related instrumentation and provides examples of experimental results on selected fuel performance items. In particular, current irradiation conducted on high/very high burn-up fuels are reviewed in some detail

  10. IFMIF : International Fusion Materials Irradiation Facility Conceptual Design Activity: Executive summary

    International Nuclear Information System (INIS)

    1997-01-01

    This report is a summary of the results of the Conceptual Design Activity (CDA) on the International Fusion Materials Irradiation Facility (IFMIF), conducted during 1995 and 1996. The activity is under the auspices of the International Energy Agency (IEA) Implementing Agreement for a Programme of Research and Development on Fusion Materials. An IEA Fusion Materials Executive Subcommittee was charged with overseeing the IFMIF-CDA work. Participants in the CDA are the European Union, Japan, and the United States, with the Russian Federation as an associate member

  11. IFMIF : International Fusion Materials Irradiation Facility Conceptual Design Activity: Executive summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    This report is a summary of the results of the Conceptual Design Activity (CDA) on the International Fusion Materials Irradiation Facility (IFMIF), conducted during 1995 and 1996. The activity is under the auspices of the International Energy Agency (IEA) Implementing Agreement for a Programme of Research and Development on Fusion Materials. An IEA Fusion Materials Executive Subcommittee was charged with overseeing the IFMIF-CDA work. Participants in the CDA are the European Union, Japan, and the United States, with the Russian Federation as an associate member.

  12. Investigation of high flux test module for the international fusion materials irradiation facilities (IFMIF)

    International Nuclear Information System (INIS)

    Miyashita, Makoto; Sugimoto, Masayoshi; Yutani, Toshiaki

    2007-03-01

    This report describes investigation on structure of a high neutron flux test module (HFTM) for the International Fusion Materials Irradiation Facilities (IFMIF). The HFTM is aimed for neutron irradiation of a specimen in a high neutron flux domain of the test cell for irradiation ground of IFMIF. We investigated the overall structure of the HFTM that was able to include specimens in a rig and thermocouple arrangement, an interface of control signal and support structure. Moreover, pressure and the amount of the bend in the module vessel (a rectangular section pressure vessel) were calculated. The module vessel did a rectangular section from limitation of a high neutron flux domain. Also, we investigated damage of thermocouples under neutron irradiation, which was a temperature sensor of irradiation materials temperature control demanded high precision. Based on these results, drawings on the HTFM structure. (author)

  13. Revealing by secondary electronic emission of internal electric fields in the yttriated zirconia, irradiated by electrons of 1 MeV

    International Nuclear Information System (INIS)

    Blaise, G.; Paris-11 Univ., 91 - Orsay

    2007-01-01

    The defects due to irradiation in a dielectric material present an activity which can generate macroscopic internal electric fields. A method of investigation of these fields, based on the measure of the Secondary Electronic Emission coefficient, has been developed on a scanning electric microscope. This ones contains two low noise detectors which respectively measure the influence current I IC produced by the charges trapping in the material and the current I SB due to secondary and backscattered electrons which come from the sample. The Secondary Emission coefficient is given by σ=I SB /(I SB +I IC ). The charges trapping during an electrons injection leads to a variation of σ for its intrinsic value σ 0 relative to the uncharged material, until the stationary value σ st =1 corresponding to the auto-regulated condition. This variation is due to the development of an internal electric field produced by the accumulation of the charges trapped during injection. In comparing the evolutions of σ of a fresh yttriated zirconia and of an yttriated zirconia irradiated by electrons of 1 MeV with a dose rate of 10 18 e/cm 2 , it has been revealed that an internal field (due to irradiation) of about 0.5*10 6 V/m exists at a depth of the micron order. This field, directed towards the outside of the material surface, is attributed to the F + defects and to the T centers produced by the impact of the electrons of 1 MeV. In carrying out annealings until 1000 K, a progressive disappearance of this field is observed in the temperature range of 400-600 K, directly due to the F + defects and T centers recovery, as it has been observed by ESR. An internal field three times weaker than the preceding ones has been revealed at a few nm under the surface. Its disappearance from a temperature of 1000 K suggests that it is due to the redistribution of the chemical species into the surface, during the irradiation with electrons of 1 MeV. (O.M.)

  14. Release of fission products and post-pile creep behaviour of irradiated fuel rods stored under dry conditions

    International Nuclear Information System (INIS)

    Kaspar, G.; Peehs, M.; Bokelmann, R.; Jorde, D.; Schoenfeld, H.; Haas, W.; Bleier, A.; Rutsch, F.

    1985-06-01

    The release of moisture and fission products (Kr-85, H-3 and I-129) under dry storage conditions has been examined on six fuel rods which have become defective in the reactor. During the examinations, inert conditions prevailed and limited air inlet was allowed temporarily. The storage temperature was 400 0 C. The residual moisture content of the fuel rods was approx. 5 g. At the beginning of the test, the total moisture content and 0,05% (max.) of the fission gas inventory were released. Under inert conditions, fission gas was not released during a prolonged period of time. Under oxidizing conditions, however, fission gas was released in the course of UO 2 oxidation. Post-pile creep of Zircaloy cladding tubes was measured at temperatures between 350 and 395 0 C and interval gauge pressures between 69 and 110 bar. The creep curves indicate that the irradiated cladding tube specimens still bear internal residual stresses which contribute through their relaxation to the post-pile creep. (orig.) [de

  15. Internal friction in Al alloys after neutron irradiation at low temperature

    International Nuclear Information System (INIS)

    Takamura, S.; Kobiyama, M.

    1985-01-01

    Internal friction and elastic modulus of dilute Al alloys have been measured after fast neutron irradiation at about 5 K. The internal friction spectra in Al-Pb, Al-Si, Al-Zn, Al-Ag, Al-Sn and Al-In are very similar. This result suggests that the configuration of the interstitial-solute atom complex in these alloys is very similar. In Al-Mg, the main complexes have the configuration with nearly symmetry, but its internal friction spectrum is different from that of the above-mentioned alloys. The internal friction spectra and their annealing behavior in Al-Be, Al-Mn, Al-Fe and Al-Cu demonstrate that the configuration of their interstitial-solute atom complex seems to be different from each other and the main complex in these alloys is immobile until stage III. (author)

  16. Development of Irradiation Procedure for Gamma Irradiation Chamber Bio beam GM 8000

    International Nuclear Information System (INIS)

    Shuhaimi Shamsudin; Affrida Abu Hassan; Zaiton Ahmad; Abdul Rahim Harun; Ahmad Zainuri Mohd Dzomir

    2015-01-01

    Bio Beam GM 8000 gamma irradiation chamber obtained a conditional approval to operate on March 27, 2012, and later acquired a full approval on December 13, 2012. The objective for the procurement of this gamma chamber is to develop an acute irradiation facility for biological samples, including plants tissues, insects, pupae, microorganisms, as well as animal and human cells. To ensure a smooth and efficient operation, irradiation procedures were developed and improved over time. This paper discusses the operation and management of the Bio Beam GM 8000 facility, including irradiation procedures and sample preparation, application for services through online e-client system, consultancy, quality assurance and information dissemination to internal as well as external clients. In addition, this paper also discusses the potential, constraints and improvement measures taken to optimize the use of this facility in order to meet its objectives. (author)

  17. Patients exposed to therapeutic irradiation for benign conditions in childhood

    International Nuclear Information System (INIS)

    Carroll, R.G.

    1976-01-01

    In the United States there are over 1 million individuals who have been irradiated for benign conditions in the head and neck. Many recent reports document conclusively that individuals who have had head and neck radiation for benign conditions have markedly increased risk of thyroid, salivary, and perhaps breast cancer as compared to the general population. Although the relative risk as compared to the general population is high, the risk that any one individual who has had head or neck irradiation will develop a subsequent malignancy is relatively low. Identification of these patients through some type of screening procedure may be beneficial in terms of prevention of subsequent mortality and morbidity from cancer, especially thyroid and salivary cancer. The American Medical Association and the American Hospital Association issued a joint statement of October 17, 1975, urging hospitals and physicians to work together in their communities to develop guidelines and procedures for screening of exposed individuals and for public education

  18. Computational science simulation of laser materials processing and provision of their irradiation conditions

    International Nuclear Information System (INIS)

    Muramatsu, Toshiharu

    2016-01-01

    In laser processing, it is necessary for achieving the intended performance and product, to understand the complex physical courses including melting and solidification phenomena occurring in laser processing, and thus to set proper laser irradiation conditions. This condition optimization work requires an enormous amount of overhead due to repeated efforts, and has become a cause for inhibiting the introduction of laser processing technology into the industrial field that points to the small lot production of many products. JAEA tried to make it possible to quantitatively handle the complex physical course from the laser light irradiation to the fabricating material until the completion of processing, and is under development of the computational science simulation code SPLICE that connects micro behavior and macro behavior through a multi-level scale model. This SPLICE is able to visualize the design space and to reduce the overhead associated with the setting of laser irradiation conditions and the like, which gives the prospect of being effective as a tool for front-loading. This approach has been confirmed to be effective for the welding and fusing process. (A.O.)

  19. Irradiation combined with Bleomycin treatment of synchronized cells in culture under oxic and hypoxic conditions

    International Nuclear Information System (INIS)

    Midander, J.; Littbrand, B.; Edsmyr, F.

    1980-01-01

    Bleomycin-treated cells are sensitized to radiation delivered under oxic conditions both in the early S and G 2 phases of the cycle, irradiated under hypoxic conditions, sensitization occurs only in the early S phase. This difference in the sensitizing effect of the drug is discussed in regard to the possible clinical advantages of a combined treatment of tumours with irradiation and Bleomycin. (Auth.)

  20. Radioresistance of immunized animals in internal irradiation

    International Nuclear Information System (INIS)

    Kal'nitskij, S.A.; Ponomareva, T.V.; Shubik, V.M.

    1981-01-01

    The influence of an immunization with bacterial vaccines and antimeasles-gamma-globulin on the radioresistance of raceless white mice was studied. In the vaccinated animals a higher survival rate and duration of life, a better general condition and a better curve of weight and stronger physical stamina were stated compared to the merely irradiated mice. The higher radioresistance is ascribed to the stimulation of cellular and humoral factors of the unspecific protection against infection, to the repair of the lymphoid tissue of the immunized animals and to the decrease in autosensibilization. (author)

  1. Quality evaluation of garlic irradiated in Argentine and stored in Brazil

    International Nuclear Information System (INIS)

    Curzio, Osvaldo A.; Croci, Clara A.; Domarco, Rachel E.; Spoto, Marta H.F.; Blumer, Lucimara; Walder, Julio M.M.

    1997-01-01

    This work was undertaken to evaluate the quality of garlic Colorado, irradiated in Argentina and stored for long period of time under environmental conditions in Brazil. Two samples of 100 kg each were selected from high quality garlic harvested in December/1995 from a region close to the Universidad Nacional del Sur. At 30 days after harvesting one of the samples were irradiated with a dose of 60 Gy. Both samples, irradiated and non irradiated, were transported by road from the Laboratorio de Radioisotopos of the Universidad Nacional del Sur, Bahia Blanca, Argentina, to the Centro de Energia Nuclear na Agriculture (CENA-USP), Piracicaba, Sao Paulo, Brazil. The effects of irradiation on weigh loss , discard, germination and sensorial analysis were nonthly observed on CENA among 30and 180 days of storage. The evaluation of germination evidences the benefits of the radioinhibition process. The irradiated bulbs did not exhibit any intern bud, however the non-irradiated bulbs exhibit any intern bud, however the non-irradiated bulbs exhibit any intern bud, however the non-irradiated bulbs exhibit 100% of germination on the period of storage. At the end of the period of storage, the weigh loss of the irradiated garlic was smaller than the non-irradiate one. The percentage of discard, evaluated as intern germination, scatying and whitering, was 43% on the irradiated sample. The analysis of sensorial parameters shows no difference between irradiated and non-irradiated garlic, so irradaition did not affect the sensorial quality of the product. (author). 12 refs., 8 tabs

  2. The effects of combined treatment of irradiation and heat on bacteria escherichia coli and sarcina lutea in dry condition

    International Nuclear Information System (INIS)

    Nikham; Hilmy, Nazly

    1987-01-01

    The effects of combination treatment of irradiation and heat on bacteria escherichia coli and sarcina lutea in dry condition. Investigation on the effects of combined irradiation + heat and heat + irradiation treatments have been carried out i.e. at the doses of 0; 1.0; 1.5; and 2.0 kGy with heating at 50 0 C for 10; 20; and 30 minutes on escherichia coli B/r, escherichia coli from sludge and sarcine lutea. Samples of bacteria were prepared in dry condition by using sterile fine sand as carrier. Irradiation was done in aerobic condition with RH 90% and the time range between irradiation and heating was not more than 2 hours. The results showed that the D 10 value did not give significant difference between the combined irradiation + heat, and heat + irradiation treatments for the 3 species of bacteria, compared to irradiation only (p 0.05). Doses of 1.0 and 1.5 kGy combined with heating at 50 0 C for 10 and 20 minutes gave better results compared to irradiation only. 17 refs

  3. Literature study of the radiobiological parameters of Caesium-137 required for evaluating internal irradiation doses as a function of age; Etude bibliographique des parametres radiobiologiques du cesium-137 necessaires a l'evaluation des doses d'irradiation interne en fonction de l'age

    Energy Technology Data Exchange (ETDEWEB)

    Garnier, A [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-07-01

    This document reassembles information published in scientific literature on radiobiological parameters of Cs-137, necessary for the estimate of the internal irradiation dose of man according to his age (during growth). The data are completed by a commented review of the mathematical models, proposed in order to value the irradiation doses from ingested cesium and the biological parameters. (author) [French] Ce document rassemble les informations publiees dans la litterature scientifique, concernant les parametres radiobiologiqueo du cesium-137, necessaires a l'evaluation des doses d'irradiation interne de l'homme en fonction de l'age. Ces donnees sont completees par une revue commentee des modeles mathematiques proposes en vue de l'evaluation des doses d'irradiation a partir des quantites de cesium ingerees et des parametres biologiques. (auteur)

  4. Changes in quality of apple (Malus domestica) cultivars due to γ-irradiation and storage conditions

    International Nuclear Information System (INIS)

    Hussain, P.R.; Dar, M.A.; Meena, R.S.; Wani, A.M.; Mir, M.A.; Shafi, F.

    2008-01-01

    Ambri, Golden Delicious and Royal Delicious apple varieties were γ-irradiated (0.1-0.5 kGy) and stored under ambient (15 ±2 degC, 80%RH) and refrigerated (3±1 degC, 90%RH) conditions. They were evaluated periodically for firmness, total soluble solids, acidity, juice yield, physiological loss in weight, overall acceptability and yeast and mold counts. The γ-irradiation doses of 0.2, 0.3 and 0.5 kGy proved beneficial in maintaining the overall quality of all the 3 varieties of apple under both the storage conditions. γ-irradiation significantly reduced the yeast and mold counts of apples under storage. (author)

  5. Irradiation behavior of German PWR RPV steels under operating conditions

    Energy Technology Data Exchange (ETDEWEB)

    May, J.; Hein, H. [AREVA NP Gmbh (Germany); Ganswind, J. [VGB PowerTech e.V. (Germany); Widera, M. [RWE Power AG (Germany)

    2011-07-01

    In 2007, the last standard surveillance capsule of the original RPV (Reactor Pressure Vessel) surveillance programs of the 11 currently operating German PWR has been evaluated. With it the standard irradiation surveillance programs of these plants was completed. In the present paper, irradiation data of these surveillance programs will be presented and a final assessment of the irradiation behavior of the German PWR RPV steels with respect to current standards KTA 3203 and Reg. Guide 1.99 Rev. 2 will be given. Data from two units which are currently under decommissioning will also be included, so that data from all 13 German PWR manufactured by the former Siemens/KWU company (now AREVA NP GmbH) are shown. It will be shown that all surveillance data within the approved area of chemical composition verify the limit curve RT(limit) of the KTA 3203, which is the relevant safety standard for these plants. An analysis of the data shows, that the prediction formulas of Reg. Guide 1.99 Rev. 2 Pos. 1 or from the TTS model tend to overestimate the irradiation behavior of the German PWR RPV steels. Possible reasons for this behavior are discussed. Additionally, the data will be compared to data from the research project CARISMA to demonstrate that these data are representative for the irradiation behavior of the German PWR RPV steels. Since the data of these research projects cover a larger neutron fluence range than the original surveillance data, they offer a future outlook into the irradiation behavior of the German PWR RPV steels under long term conditions. In general, as a consequence of the relatively large and beneficial water gap between core and RPV, especially in all Siemens/KWU 4-loop PWR, the EOL neutron fluence and therefore the irradiation induced changes in mechanical properties of the German PWR RPV materials are rather low. Moreover the irradiation data indicate that the optimized RPV materials specifications that have been applied in particular for the

  6. The application of an internal state variable model to the viscoplastic behavior of irradiated ASTM 304L stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    McAnulty, Michael J., E-mail: mcanulmj@id.doe.gov [Department of Energy, 1955 Fremont Avenue, Idaho Falls, ID 83402 (United States); Potirniche, Gabriel P. [Mechanical Engineering Department, University of Idaho, Moscow, ID 83844 (United States); Tokuhiro, Akira [Mechanical Engineering Department, University of Idaho, Idaho Falls, ID 83402 (United States)

    2012-09-15

    Highlights: Black-Right-Pointing-Pointer An internal state variable approach is used to predict the plastic behavior of irradiated metals. Black-Right-Pointing-Pointer The model predicts uniaxial tensile test data for irradiated 304L stainless steel. Black-Right-Pointing-Pointer The model is implemented as a user-defined material subroutine in the finite element code ABAQUS. Black-Right-Pointing-Pointer Results are compared for the unirradiated and irradiated specimens loaded in uniaxial tension. - Abstract: Neutron irradiation of metals results in decreased fracture toughness, decreased ductility, increased yield strength and increased ductile-to-brittle transition temperature. Designers use the most limiting material properties throughout the reactor vessel lifetime to determine acceptable safety margins. To reduce analysis conservatism, a new model is proposed based on an internal state variable approach for the plastic behavior of unirradiated ductile materials to support its use for analyzing irradiated materials. The proposed modeling addresses low temperature irradiation of 304L stainless steel, and predicts uniaxial tensile test data of irradiated experimental specimens. The model was implemented as a user-defined material subroutine (UMAT) in the finite element software ABAQUS. Results are compared between the unirradiated and irradiated specimens subjected to tension tests.

  7. Degradation of austenitic stainless steel (SS) light water ractor (LWR) core internals due to neutron irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Rao, Appajosula S., E-mail: Appajosula.Rao@nrc.gov

    2014-04-01

    Austenitic stainless steels (SSs) are extensively being used in the fabrication of light water reactor (LWR) core internal components. It is because these steels have relatively high ductility, fracture toughness and moderate strength. However, the LWR internal components exposure to neutron irradiation over an extended period of plant operation degrades the materials mechanical properties such as the fracture toughness. This paper summarizes some of the results of the existing open literature data on irradiation assisted stress corrosion cracking (IASCC) of 316 CW steels that have been published by the United States Nuclear Regulatory Commission (USNRC), industry, academia, and other research agencies.

  8. Characterization of gamma irradiated peanut kernels stored one year under ambient and frozen conditions

    International Nuclear Information System (INIS)

    Chiou, R.Y.Y.; Shyu, S.L.; Tsai, C.L.

    1991-01-01

    Peanut kernels were gamma irradiated at 0, 2.5, 5.0, 10, and 20 KGy, and stored 1 yr at ambient and frozen (-14 degrees C) conditions. Irradiated peanuts lost germination capabilities during storage. Molds were detected only on peanuts irradiated with 2.5 KGy and stored at ambient temperature. Peanut oil in kernels stored at -14 degrees C was comparatively more stable than that in peanuts stored at ambient temperature. Oxidation of oil was not significantly changed by irradiation. Changes in fatty acid content varied slightly with exception of linoleic and linolenic acids which decreased with increased radiation depending on storage temperature. The SDS-PAGE protein patterns of peanuts revealed no noticeable variation of protein subunits resulting from irradiation and storage

  9. Conditioned instrumental behaviour in the rat: Effects of prenatal irradiation with various low dose-rate doses

    International Nuclear Information System (INIS)

    Klug, H.

    1986-01-01

    4 groups of rats of the Wistar-strain were subjected to γ-irradiation on the 16th day of gestation. 5 rats received 0,6 Gy low dose rate irradiation, 5 animals received 0,9 Gy low dose and 6 high dose irradiation, 3 females were shamirradiated. The male offspring of these 3 irradiation groups and 1 control group were tested for locomotor coordination on parallel bars and in a water maze. The female offspring were used in an operant conditioning test. The locomotor test showed slight impairment of locomotor coordination in those animals irradiated with 0,9 Gy high dose rate. Swimming ability was significantly impaired by irradiation with 0,9 Gy high dose rate. Performance in the operant conditioning task was improved by irradiation with 0,9 Gy both low and high dose rate. The 0,9 Gy high dose rate group learned faster than all the other groups. For the dose of 0,9 Gy a significant dose rate effect could be observed. For the dose of 0,6 Gy a similar tendency was observed, differences between 0,6 Gy high and low dose rate and controls not being significant. (orig./MG) [de

  10. Microstructural characterization and model of hardening for the irradiated austenitic stainless steels of the internals of pressurized water reactors

    International Nuclear Information System (INIS)

    Pokor, C.

    2003-01-01

    The core internals of Pressurized Water Reactors (PWR) are composed of SA 304 stainless steel plates and CW 316 stainless steel bolts. These internals undergo a neutron flux at a temperature between 280 deg C and 380 deg C which modifies their mechanical properties. These modifications are due to the changes in the microstructure of these materials under irradiation which depend on flux, dose and irradiation temperature. We have studied, by Transmission Electron Microscopy, the microstructure of stainless steels SA 304, CW 316 and CW 316Ti irradiated in a mixed flux reactor (OSIRIS at 330 deg C between 0,8 dpa et 3,4 dpa) and in a fast breeder reactor at 330 deg C (BOR-60) up to doses of 40 dpa. Moreover, samples have been irradiated at 375 deg C in a fast breeder reactor (EBR-II) up to doses of 10 dpa. The microstructure of the irradiated stainless steels consists in faulted Frank dislocation loops in the [111] planes of austenitic, with a Burgers vector of [111]. It is possible to find some voids in the solution annealed samples irradiated at 375 deg C. The evolution of the dislocations loops and voids has been simulated with a 'cluster dynamic' model. The fit of the model parameters has allowed us to have a quantitative description of our experimental results. This description of the microstructure after irradiation was coupled together with a hardening model by Frank loops that has permitted us to make a quantitative description of the hardening of SA 304, CW 316 and CW 316Ti stainless steels after irradiation at a certain dose, flux and temperature. The irradiation doses studied grow up to 90 dpa, dose of the end of life of PWR internals. (author)

  11. Reduced cost design of liquid lithium target for international fusion material irradiation facility (IFMIF)

    International Nuclear Information System (INIS)

    Nakamura, Hiroo; Ida, Mizuho; Sugimoto, Masayoshi; Takeuchi, Hiroshi; Yutani, Toshiaki

    2001-01-01

    The International Fusion Materials Irradiation Facility (IFMIF) is being jointly planned to provide an accelerator-based D-Li neutron source to produce intense high energy neutrons (2 MW/m 2 ) up to 200 dpa and a sufficient irradiation volume (500 cm 3 ) for testing the candidate materials and components up to about a full lifetime of their anticipated use in ITER and DEMO. To realize such a condition, 40 MeV deuteron beam with a current of 250 mA is injected into high speed liquid lithium flow with a speed of 20 m/s. Following Conceptual Design Activity (1995-1998), a design study with focus on cost reduction without changing its original mission has been done in 1999. The following major changes to the CAD target design have been considered in the study and included in the new design: i) number of the Li target has been changed from 2 to 1, ii) spare of impurity traps of the Li loop was removed although the spare will be stored in a laboratory for quick exchange, iii) building volume was reduced via design changes in lithium loop length. This paper describes the reduced cost design of the lithium target system and recent status of Key Element Technology activities. (author)

  12. Mechanism of laser ablation for aqueous media irradiated under confined-stress conditions

    International Nuclear Information System (INIS)

    Oraevsky, A.A.; Jacques, S.L.; Tittel, F.K.

    1995-01-01

    Pulsed laser ablation of aqueous medium irradiated under conditions of temporal confinement of thermal stress is described. Time-resolved measurements of laser-induced transient stress waves with simultaneous imaging of ablation process by laser-flash photography were performed. Stress transients induced in aqueous solution of K 2 CrO 4 by ablative nanosecond laser pulses at 355 nm were studied by a broad-band lithium niobate acoustic transducer. Recoil momentum upon material ejection was measured from the temporal profiles of the acoustic transducer signal as a function of incident laser fluence. Cavitation bubbles produced in the irradiated volume during the tensile phase of thermoelastic stress were shown to drive material ejection at temperatures substantially below 100 degree C. Experimental data are evident that nanosecond-pulse laser ablation of aqueous media (when temporal stress-confinement conditions are satisfied) include the following two main stages of material ejection: (1) ejection of water microdroplets due to expansion and rupture of subsurface cavitation bubbles; (2) ejection of liquid streams with substantial volume upon collapse of initial crater and large cavitation bubbles in the depth of irradiated volume (after coalescence of smaller bubbles). copyright 1995 American Institute of Physics

  13. Hydrogen bubble formation and evolution in tungsten under different hydrogen irradiation conditions

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Wenhui; Luo, Fengfeng; Shen, Zhenyu [Key Laboratory of Artificial Micro- and Nano-structures of Ministry of Education, Hubei Nuclear Solid Physics Key Laboratory and School of Physics and Technology, Wuhan University, Wuhan 430072 (China); Guo, Liping, E-mail: guolp@whu.edu.cn [Key Laboratory of Artificial Micro- and Nano-structures of Ministry of Education, Hubei Nuclear Solid Physics Key Laboratory and School of Physics and Technology, Wuhan University, Wuhan 430072 (China); Zheng, Zhongcheng; Wen, Yongming [Key Laboratory of Artificial Micro- and Nano-structures of Ministry of Education, Hubei Nuclear Solid Physics Key Laboratory and School of Physics and Technology, Wuhan University, Wuhan 430072 (China); Ren, Yaoyao [Center for Electron Microscopy, Wuhan University, Wuhan 430072 (China)

    2015-01-15

    Highlights: • Direct and clear observation of hydrogen bubbles evolution by TEM is provided. • The role of temperature playing in bubble formation and evolution is fully explored. • Vacancy trapping mechanism is verified in this experiment. - Abstract: In order to see how hydrogen is behaving in tungsten and to understand the way bubbles form and grow up, specimens were irradiated by hydrogen ions from room temperature to 800 °C to fluence of 2.25 × 10{sup 21} m{sup −2}. Experimental results show that higher temperature helped bubble acquire higher internal pressure, causing interstitial loop punching to happen. In this process bubbles’ size grew and dislocation loops were formed but dislocation loops migrated away at and above 350 °C. And bubble number density reached peak value at 600 °C but then dropped dramatically at 800 °C. Because continuously increasing temperature would cause small bubbles dissolution or leaking out. Besides, high temperature also prevented tiny bubbles growing to be visible under TEM observation by their reaching equilibrium pressure before reaching threshold pressure for loop punching. In the other set of experiments, specimens were irradiated by low hydrogen fluence of 1 × 10{sup 20} m{sup −2} at 600 °C, in which case few hydrogen bubbles appeared. With further increasing irradiation fluence, bubble number density quickly increased. Small bubbles tended to coalesce to become larger visible bubbles. And they continued to grow through loop punching until their internal pressure cannot support their size expansion any more.

  14. Effects of pre-irradiation conditioning of Medfly pupae (Diptera: Tephritidae): Hypoxia and quality of sterile males

    International Nuclear Information System (INIS)

    Nestel, D.; Nemny-Lavy, E.; Islam, S.M.; Wornoayporn, V.; Caceres, C.

    2007-01-01

    Irradiation of pupae in sterile insect technique (SIT) projects is usually undertaken in hypoxic atmospheres, which have been shown to lessen the deleterious effects of irradiation on the quality of adult sterile flies. Although this is the accepted technology in most mass-rearing and sterilization facilities, to date no information has been generated on the actual levels of oxygen (O 2 ) in pupae-packing containers during irradiation. The present study utilized recently-developed technology to investigate the O 2 level inside bags in which pupae of Mediterranean fruit fly (medfly) Ceratitis capitata (Wiedemann) are packed prior to irradiation, the ability of pupae to create hypoxic environments in these bags, and the effect of O 2 atmospheres on the quality of irradiated males. Pupae, 1 d before adult emergence, were shown to deplete the O 2 level in sealed bags in approximately 1 h. The rate of O 2 consumption was dependent upon pupal age and incubation temperature. Incubation temperature did not significantly affect the quality of pupae or mating capacity of resultant adult males if pupae were irradiated under maximal hypoxic conditions inside packing bags. In contrast, mating competitiveness drastically decreased when pupae were irradiated under ambient O 2 conditions, with the packing bag open. There was no difference in the mating capacity of males when pupae were irradiated in sealed bags under either 10% or 2% O 2 levels, or under maximal hypoxia. Normal doses of fluorescent dye, applied to pupae to mark sterile flies, did not affect the ability of pupae to create hypoxic conditions inside packing bags, nor the quality control parameters of either pupae or adults. Current practices in mass-rearing facilities are discussed in the light of these results. (author) [es

  15. Cycloadditions of ketene acetals under microwave irradiation in solvent-free conditions

    International Nuclear Information System (INIS)

    Diaz-Ortiz, A.; Diez-Barra, E.; La Hoz, A. De; Prieto, P.; Moreno, A.

    1994-01-01

    When subjected to microwave irradiation ketene acetals undergo 1.3-dipolar and hetero-Diels-Alder cycloadditions within 5-12 min to give excellent yields of easily purified heterocyclic products. This efficient and rapid synthesis has the advantage of employing milder reaction conditions than those of classical thermal heating. (author)

  16. NRI experimental facility for the testing of irradiation assisted stress corrosion cracking

    International Nuclear Information System (INIS)

    Ruscak, M.; Chvatal, P.; Zamboch, M.

    1998-01-01

    IASCC influencing reactor internals of both BWR and PWR reactors is a complex phenomenon covering influences of material structure, neutron fluence, neutron flux, chemistry of environment, gamma radiation and mechanical stress. To evaluate such degradation, tests should be performed under conditions similar to those in real structure. Nuclear Research Institute has built several experimental facilities in order to be able to test IASCC degradation of materials. Basically, reactor water loops, both PWR and BWR, could be used to model environmental conditions including gamma and neutron irradiation. Pre-irradiation can be done in irradiation channels under well controlled temperature conditions. During the experiment, in-pile conditions can be compared with those out of pile. It enables to clarify pure influence of irradiation. For testing of irradiated specimens, hot cell facility has been developed for slow strain rate tests. The paper will show all above mentioned facilities as well as some of the results observed with them. (author)

  17. Literature study of the radiobiological parameters of Caesium-137 required for evaluating internal irradiation doses as a function of age; Etude bibliographique des parametres radiobiologiques du cesium-137 necessaires a l'evaluation des doses d'irradiation interne en fonction de l'age

    Energy Technology Data Exchange (ETDEWEB)

    Garnier, A. [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-07-01

    This document reassembles information published in scientific literature on radiobiological parameters of Cs-137, necessary for the estimate of the internal irradiation dose of man according to his age (during growth). The data are completed by a commented review of the mathematical models, proposed in order to value the irradiation doses from ingested cesium and the biological parameters. (author) [French] Ce document rassemble les informations publiees dans la litterature scientifique, concernant les parametres radiobiologiqueo du cesium-137, necessaires a l'evaluation des doses d'irradiation interne de l'homme en fonction de l'age. Ces donnees sont completees par une revue commentee des modeles mathematiques proposes en vue de l'evaluation des doses d'irradiation a partir des quantites de cesium ingerees et des parametres biologiques. (auteur)

  18. Adequate irradiation of the internal jugular lymph node chain: technical considerations

    International Nuclear Information System (INIS)

    Aref, Amr; Gross, Martin; Fontanesi, James; Devi, Syamala; Kopel, Christine; Thornton, Dale

    1997-01-01

    Purpose: This research aimed to study the anatomic relationship between the internal jugular vein with the surrounding internal jugular lymph node chain and the underlying bony anatomical structures which are commonly used as landmarks for radiation therapy planning. Methods and Materials: Twelve patients with carcinoma of the head and neck region were studied prospectively. Using our three-dimensional planning system, a beam's-eye view of the internal jugular vein was projected onto a lateral and anterior simulation film. Quantitative measurements were made in every case of the anatomic relationship between the internal jugular vein and the posterior border of the cervical vertebrae and sagittal midline. Results: The distance between the posterior border of the internal jugular vein and the posterior border of the cervical vertebrae ranged between 0 and 2.5 cm. The distances between the sagittal midline and the medial border of the internal jugular veins ranged between 2 and 4 cm. Conclusion: To ensure adequate irradiation of the internal jugular lymph nodes, the posterior border of the lateral radiation therapy upper-neck fields should be placed at least 1 cm posterior to the posterior aspect of the cervical vertebrae. The midline block used in the lower neck anterior field should not exceed 2 cm in width

  19. Enhancement in irradiated mononuclear cells in culture of mitogen-induced incorporation of [3H]thymidine by homologous conditioned medium

    International Nuclear Information System (INIS)

    Sandru, G.; Greiner, R.

    1994-01-01

    Incorporation of [ 3 H]thymidine in irradiated peripheral blood mononuclear cell cultures irradiated in vitro was stimulated significantly by either concanavalin A or phytohemagglutinin only in the presence of homologous conditioned medium. Production of this activity by mononuclear cells was enhanced by irradiation and/or pulsed exposure to puromycin but was abolished by actinomycin D. Addition of anti-interleukin 1 or anti-interleukin 2 monoclonal antibodies to the conditioned medium before assay did not influence the stimulatory action. A similar significant stimulation of mononuclear cell cultures irradiated with 6 Gy by concanavalin A was obtained when purified preparations of homologous conditioned medium were used in the assay. Purification was done by ultrafiltration and concentration, heparin agarose chromatography, ammonium sulfate precipitation, concanavalin A agarose chromatography, DEAE-ion exchange chromatography and HPLC gel filtration chromatography. With SDS-PAGE and silver staining, the active HPLC fraction gave one band of 50 kDa, suggesting that this protein is responsible for the co-stimulatory effect of homologous conditioned medium for both mitogen-induced irradiated and nonirradiated mononuclear cell cultures. 42 refs., 9 figs., 3 tabs

  20. Calculation of absorbed dose of anchorage-dependent cells from internal beta-rays irradiation

    International Nuclear Information System (INIS)

    Chen Jianwei; Huang Gang; Li Shijun

    2001-01-01

    Objective: To elicit the formula of internal dosimetry in anchorage-dependent cells by beta-emitting radionuclides from uniformly distributed volume sources. Methods: By means of the definition of absorbed dose and the MIRD (Medical International Radiation Dose) scheme the formula of internal dosimetry was reasonably deduced. Firstly, studying the systems of suspension culture cells. Then, taking account of the speciality of the systems of the anchorage-dependent cells and the directions of irradiation, the absorbed dose of anchorage -dependent cells was calculated by the accumulated radioactivity, beta-ray energy, and the volume of the cultured systems. Results: The formula of internal dosimetry of suspension culture cells and anchorage-dependent cells were achieved. At the same time, the formula of internal dosimetry of suspension culture cells was compared with that of MIRD and was confirmed accurate. Conclusion: The formula of internal dosimetry is concise, reliable and accurate

  1. Pressure control of a proton beam-irradiated water target through an internal flow channel-induced thermosyphon.

    Science.gov (United States)

    Hong, Bong Hwan; Jung, In Su

    2017-07-01

    A water target was designed to enhance cooling efficiency using a thermosyphon, which is a system that uses natural convection to induce heat exchange. Two water targets were fabricated: a square target without any flow channel and a target with a flow channel design to induce a thermosyphon mechanism. These two targets had the same internal volume of 8 ml. First, visualization experiments were performed to observe the internal flow by natural convection. Subsequently, an experiment was conducted to compare the cooling performance of both water targets by measuring the temperature and pressure. A 30-MeV proton beam with a beam current of 20 μA was used to irradiate both targets. Consequently, the target with an internal flow channel had a lower mean temperature and a 50% pressure drop compared to the target without a flow channel during proton beam irradiation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Repair of mouse haemopoiesis at later times after long-term external (137Cs) and internal (3H) irradiation

    International Nuclear Information System (INIS)

    Luzanov, V.M.; Murzina, L.D.; Kirillova, E.N.

    1982-01-01

    In experiments on CBA mice it was shown that the haemopoiesis recovery was incomplete during 18 months after termination of internal exposure to tritium oxide or external γ-irradiation in the equivalent daily and cumulative doses. in mice given the radionuclide, the increment of CFUsub(s) and bone marrow nucleate cells was accompanied by leuko- and thrombocytopenia. In mice externally exposed to γ-rays, cytopenia did not develop at a lower content of CFUsub(s) and myelocaryocytes. It is suggested that the revealed diversions in the pattern of recovery of the haemopoiesis of mice of the compared groups are conditioned by the changes in functional activity of haemopoietic stem cells

  3. Study on irradiation conditions of producing 153Sm with natural abundance samarium target

    International Nuclear Information System (INIS)

    Du Jin; Jin Xiaohai; Bai Hongsheng; Liu Yuemin; Chen Daming; Wang Fan

    1998-01-01

    Irradiation conditions of natural abundance 152 Sm targets in different forms are studied in the heavy water reactor and the light water swimming pool reactor at the China Institute of Atomic Energy. The result shows that the specific activity of 153 Sm in liquid form target irradiated in the light water swimming pool reactor is two times greater than that in solid form target. The radionuclide purity of 153 Sm is more than 99%, which can meet the needs of clinical application

  4. IAEA and food irradiation

    International Nuclear Information System (INIS)

    Machi, Sueo

    1995-01-01

    IAEA was founded in 1957. 122 countries take part in it. It is operated with the yearly ordinary budget of about 20 billion yen and the technical cooperation budget of about 6 billion yen and by 2200 personnel. Its two important roles are the promotion of the peaceful utilization of atomic energy and the prevention of nuclear proliferation. The activities of IAEA are shown. The cooperation with developing countries and the international research cooperation program are the important activities. The securing of foods is an urgent subject, and the utilization of radiation and isotopes has been promoted, aiming at sustaining agriculture. The necessity of food irradiation is explained, and at present, commercial food irradiation is carried out in 28 countries including Japan. The irradiation less than 10 kGy does not cause poisonous effect in any food, according to JECFI. The new international agreement is expected to be useful for promoting the international trade of irradiated foods. The international cooperation for the spread of food irradiation and the public acceptance of food irradiation are reported. (K.I.)

  5. The future Jules Horowitz material testing reactor: An opportunity for developing international collaborations on a major European irradiation infrastructure

    International Nuclear Information System (INIS)

    Parrat, D.; Bignan, G.; Maugard, B.; Gonnier, C.; Blandin, C.

    2015-01-01

    Development process of a fuel product or a nuclear material before using at an industrial scale in a power reactor ranges from characterization of the material itself under neutronic flux up to its qualification in accidental conditions. Irradiations in Material Testing Reactors (MTRs) are in practice the basis of the whole process, in complement of prediction capabilities gained by modelling. Dedicated experimental reactors play also an important complementary role for some specific integral tests (e.g. RIA tests). Irradiations of precursors in power reactors are often limited to products which present a slight design evolution compare to the standard product or are implemented for further tests when a statistical approach is useful for defining a safety criterion. However European MTR park status is characterized by ageing infrastructures, which could cause operational issues in coming years, either on technological or on safety point of views. Moreover some specific supplies related to the public demand could be strongly affected (e.g. radiopharmaceutical targets). To avoid a lack in irradiation capacity offer at European level, CEA launched the Jules Horowitz Material Testing Reactor (JHR) international program, in the frame of a Consortium gathering also EDF (FR), AREVA (FR), European Commission (EU), SCK.CEN (BE), VTT (FI), CIEMAT (SP), STUDSVIK (SE), UJV (CZ), NNL (UK), IAEC (IL), DAE (IN) and as associated partnership: JAEA (JP). Some institutions in this list are themselves the flagship of a national Consortium. Discussions for enlarging participation are on-going with other countries, as JHR Consortium is open to new member entrance until JHR completion. The Jules Horowitz Material Testing Reactor (JHR MTR) is under construction at CEA Cadarache in southern France and will be an important international User Facility for R&D in support to the nuclear industry, research centres, regulatory bodies and TSO, and academic institutions. It represents a unique

  6. International fusion materials irradiation facility and neutronic calculations for its test modules

    International Nuclear Information System (INIS)

    Sokcic-Kostic, M.

    1997-01-01

    The International Fusion Material Irradiation Facility (IFMIF) is a projected high intensity neutron source for material testing. Neutron transport calculations for the IFMIF project are performed for variety of here explained reasons. The results of MCNP neutronic calculations for IFMIF test modules with NaK and He cooled high flux test cells are presented in this paper. (author). 3 refs., 2 figs., 3 tabs

  7. Effect of gamma irradiation conditions on the radiation-induced degradation of isobutylene-isoprene rubber

    Energy Technology Data Exchange (ETDEWEB)

    Sen, M. E-mail: msen@hacettepe.edu.tr; Uzun, C.; Kantoglu, Oe.; Erdogan, S.M.; Deniz, V.; Gueven, O

    2003-08-01

    The effect of gamma irradiation conditions on the radiation-induced degradation of uncrosslinked, commercial isobutylene-isoprene rubbers has been investigated in this study. Influence of dose rate and irradiation atmosphere on the degradation of butyl rubber has been followed by viscosimetric and chromatographic analyses. Limiting viscosity number of all butyl rubbers decreased sharply up to 100 kGy and leveled off at around the same molecular weight, independent of dose rate. Slightly higher decrease in viscosity was observed for samples irradiated in air than in nitrogen especially at low dose rate irradiation. Cross-linking G(X), and chain scission G(S) yields of butyl rubbers were calculated by using weight- and number-average molecular weights of irradiated rubber determined by Size Exclusion Chromatography analyses. G-value results showed that chain scission reactions in isobutylene-isoprene rubber in air atmosphere are more favorable than in nitrogen atmosphere, and that lower dose rate enhances chain scission over cross-linking.

  8. Optimization of irradiation conditions for determination of LD50 in pigs

    International Nuclear Information System (INIS)

    Prochazka, Z.; Hampl, J.; Sedlacek, M.; Rodak, L.

    1975-01-01

    Radiation LDsub(50/30) values were determined in 36 twelve-week-old pigs (with a mean body weight of 21 kg) exposed to whole-body X-ray irradiation on a revolvable table rotated at a rate of 2.5 rpm using the following conditions: 180 kV, 15 mA, focal distance 79 cm, HVT 0.9 mm Cu, dose rate 2.42 x 10 -3 to 2.68 x 10 -3 C kg -1 min -1 (9.4 to 10.4 R/min) depending upon the animal size. The coefficient of mean irradiation uniformity was 1.4. Under these conditions the LDsub(50/30) for pigs was found to be 5.89 x 10 -2 C kg -1 , (228.3 R) with the biological range of effectiveness being 5.22 x 10 -2 to 6.90 x 10 -2 C kg -1 (202.4 to 267.6 R) Further experiments on 77 pigs showed that the LD 50 determined in this study had actually the median lethal effect. (orig.) [de

  9. Internal irradiation with radon daughters in some Bulgarian polymetal mines over the period 1962-1993

    International Nuclear Information System (INIS)

    Presiyanov, D.; Dimotrov, M.

    1993-01-01

    The results of radiation monitoring of the working environment in the Bulgarian metal mines are evaluated. The irradiation levels in the Burgas Copper Mines and their variations over the years have been estimated. A radiological characteristic of the working environment is provided together with a risk assessment for workers in different mines. A retrospective risk assessment is attempted for mines where increased radon 222 levels have been detected recently. The organization of radiometric monitoring and measures to limit the risk of internal irradiation are discussed. (author)

  10. Combination Processes in Food Irradiation. Proceedings of an International Symposium on Combination Processes in Food Irradiation

    International Nuclear Information System (INIS)

    1981-01-01

    Processes in Food Irradiation was held by the IAEA and FAO at the Bandaranaike Memorial International Conference Hall in Colombo on 24-28 November 1980, and the present volume contains the proceedings. One of the most effective means demonstrated of increasing the efficacy of irradiation in the control of food spoilage is the combination of a low irradiation dose with a mild heat treatment. Promising results were reported for the shelf-life extension of mangoes and papayas, and the disinfestation of dried dates. Commercial application of the heat-irradiation treatment for some fruits is expected to follow soon. The Symposium covered other topics, such as the mechanisms of sensitization of microorganisms by physical and chemical agents, improvement of the microbiological quality of foods by combination processes, and the aspects of the wholesomeness and legislation of the food irradiation process. A key issue in the general discussion was the recommendation on the acceptability of food irradiated up to an overall average dose of 10 kGy. This important recommendation had been achieved at a recently convened Joint FAO/IAEA/WHO Expert Committee on the Wholesomeness of Irradiated Foods (27 October — 3 November 1980, Geneva). The breakthrough on the toxicological acceptability constitutes a firm basis for going ahead speedily with the development of practical applications of food irradiation, which should take its rightful place among other food preservation methods in helping to provide more and better food to a world in need. The sponsoring organizations hope that the publication of these proceedings will encourage further research and development of food irradiation to the benefit of mankind

  11. Combination Processes in Food Irradiation. Proceedings of an International Symposium on Combination Processes in Food Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1981-09-15

    Processes in Food Irradiation was held by the IAEA and FAO at the Bandaranaike Memorial International Conference Hall in Colombo on 24-28 November 1980, and the present volume contains the proceedings. One of the most effective means demonstrated of increasing the efficacy of irradiation in the control of food spoilage is the combination of a low irradiation dose with a mild heat treatment. Promising results were reported for the shelf-life extension of mangoes and papayas, and the disinfestation of dried dates. Commercial application of the heat-irradiation treatment for some fruits is expected to follow soon. The Symposium covered other topics, such as the mechanisms of sensitization of microorganisms by physical and chemical agents, improvement of the microbiological quality of foods by combination processes, and the aspects of the wholesomeness and legislation of the food irradiation process. A key issue in the general discussion was the recommendation on the acceptability of food irradiated up to an overall average dose of 10 kGy. This important recommendation had been achieved at a recently convened Joint FAO/IAEA/WHO Expert Committee on the Wholesomeness of Irradiated Foods (27 October - 3 November 1980, Geneva). The breakthrough on the toxicological acceptability constitutes a firm basis for going ahead speedily with the development of practical applications of food irradiation, which should take its rightful place among other food preservation methods in helping to provide more and better food to a world in need. The sponsoring organizations hope that the publication of these proceedings will encourage further research and development of food irradiation to the benefit of mankind.

  12. Food Irradiation Newsletter. V.13, no. 1

    International Nuclear Information System (INIS)

    1989-03-01

    The International Conference on the Acceptance, Control of, and Trade in Irradiated Food, jointly sponsored by FAO, IAEA, WHO and ITC-UNCTAD/GATT, Geneva, Switzerland, December 1988, recognized that (1) food irradiation has the potential to reduce the incidence of foodborne diseases; (2) food irradiation can reduce post-harvest food losses and make available a larger quantity and a wider variety of foodstuffs for consumers - It can also be an effective quarantine treatment for certain food and thus contribute to international trade; (3) international trade in irradiated foods would be facilitated by harmonization of national procedures based on internationally recognized standards for the control of food irradiation. The ''International Document on Food Irradiation'' adopted by consensus at the Conference is included in this issue, which also contains excerpts of the 5th Annual Meeting of the International Consultative Group on Food Irradiation (ICGFI), convened in Vienna, September 1988, and reports of two co-ordinated meetings, the second Research Co-ordination Meeting on the Use of Irradiation as a Quarantine Treatment of Food and Agricultural Commodities, and the Second Co-ordination Meeting on Food Irradiation Programme for Developing Countries in Middle East and Europe. 3 tabs

  13. Behavior of irradiated ATR/MOX fuel under reactivity initiated accident conditions (Joint research)

    International Nuclear Information System (INIS)

    Sasajima, Hideo; Fuketa, Toyoshi; Nakamura, Takehiko; Nakamura, Jinichi; Uetsuka, Hiroshi

    2000-03-01

    Pulse irradiation experiments with irradiated ATR/MOX fuel rods of 20 MWd/kgHM were conducted at the NSRR in JAERI to study the transient behavior of MOX fuel rod under reactivity initiated accident conditions. Four pulse irradiation experiments were performed with peak fuel enthalpy ranging from 335 J/g to 586 J/g, resulted in no failure of fuel rods. Deformation of the fuel rods due to PCMI occurred in the experiments with peak fuel enthalpy above 500 J/g. Significant fission gas release up to 20% was measured by rod puncture measurement. The generation of fine radial cracks in pellet periphery, micro-cracks and boundary separation over the entire region of pellet were observed. These microstructure changes might contribute to the swelling of fuel pellets during the pulse irradiation. This could cause the large radial deformation of fuel rod and high fission gas release when the pulse irradiation conducted at relatively high peak fuel enthalpy. In addition, fine grain structures around the plutonium spot and cauliflower structure in cavity of the plutonium spot were observed in the outer region of the fuel pellet. (author)

  14. The future Jules Horowitz material test reactor: A major European research infrastructure for sustaining the international irradiation capacity

    International Nuclear Information System (INIS)

    Parrat, D.; Bignan, G.; Chauvin, J.; Gonnier, C.

    2011-01-01

    Multipurpose experimental reactors are now key infrastructures, in complement of prediction capabilities gained thanks to progresses in the modelling, for supporting nuclear energy in terms of safety, ageing management, innovation capacity, economical performances and training. However the European situation in this field is characterized by ageing large infrastructures, which could face to operational issues in the coming years and could jeopardize the knowledge acquisition and the nuclear product qualification. Moreover some specific supplies related to the public demand could be strongly affected (e.g. radiopharmaceutical targets). To avoid a lack in the experimental capacity offer at the European level, the CEA has launched the Jules Horowitz material test reactor (JHR) international program, in the frame of a Consortium gathering EDF (FR), AREVA (FR), the European Commission (EU), SCK.CEN (BE), VTT (FI), CIEMAT (SP), VATTENFALL (SE), UJV (CZ), JAEA (JP) and the DAE (IN). The JHR will be a 100 MW tank pool reactor and will have several experimental locations either inside the reactor core or outside the reactor tank in a reflector constituted by beryllium blocks. Excavation works started mid-2007 on the CEA Cadarache site in the southeast of France. After the construction permit delivery gained in September 2007, building construction began at the beginning of 2009. Reactor start-up is scheduled in 2016. The JHR is designed to offer up-to-date irradiation experimental capabilities for studying nuclear material and fuel behaviour under irradiation in a modern safety frame, mainly due to: 1) High values of fast and thermal neutron fluxes in the core and high thermal neutron flux in the reflector (producing typically twice more material damages per year than available today in European MTRs); 2) A large variety of experimental devices capable to reproduce environment conditions of mainly light water reactors (LWRs) and sodium fast reactors; 3) Several equipment

  15. Food irradiation: fiction and reality

    International Nuclear Information System (INIS)

    1991-01-01

    The International Consultative Group on Food Irradiation (IGCFI), sponsored by World Health Organization (WHO), Food and Agriculture Organization (FAO) and the International Atomic Energy Agency (IAEA), with the intention to provide to governments, especially those of developing countries, scientifically correct information about food irradiation, decided to organize a file and questions of general public interest. The document is composed by descriptive files related with the actual situation and future prospective, technical and scientific terms, food irradiation and the radioactivity, chemical transformations in irradiated food, genetic studies, microbiological safety of irradiated food, irradiation and harmlessness, irradiation and additives, packing, irradiation facilities control, process control, irradiation costs and benefits as well as consumers reaction

  16. Thermophysical instruments for non-destructive examination of tightness and internal gas pressure or irradiated power reactor fuel rods

    International Nuclear Information System (INIS)

    Pastoushin, V.V.; Novikov, A.Yu.; Bibilashvili, Yu.K.

    1998-01-01

    The developed thermophysical method and technical instruments for non-destructive leak-tightness and gas pressure inspection inside irradiated power reactor fuel rods and FAs under poolside and hot cell conditions are described. The method of gas pressure measuring based on the examination of parameters of thermal convection that aroused in gas volume of rod plenum by special technical instruments. The developed method and technique allows accurate value determination of not only one of the main critical rod parameters, namely total internal gas pressure, that forms rod mean life in the reactor core, but also the partial pressure of every main constituent of gaseous mixture inside irradiated fuel rod, that provides the feasibility of authentic and reliable leak-tightness detection. The described techniques were experimentally checked during the examination of all types power reactor fuel rods existing in Russia (WWER, BN, RBMK) and could form the basis for new technique development for non-destructive examination of PWR (and other) type rods and FAs having gas plenum filled with spring or another elements of design. (author)

  17. Study about internal friction in deformed - and irradiated pure titanium

    International Nuclear Information System (INIS)

    Miyada, L.T.

    1979-01-01

    Internal friction and modulus are measured in pure Ti at low temperature using an inverted torsion-pendulum at about 1 Hz. The presence of four relaxation peaks P' sub(d)(-140 0 C), P sub(d)(-101 0 C), P' sub(α)(-75 0 C) and P sub(α)(-50 0 C) has been found, and effects of plastic deformation, heat treatment and neutron irradiation on these peaks are investigated in detail. Activation energies and frequency factors of P sub(d) and Pα peaks are consistent with the data in higher frequency range reproted by other workers. The P sub(d) and P' sub(d) peaks grow after deformation and tend to decay after annealing at high temperatures or after neutron irradiation. Both peaks are resonably interpreted in terms of dislocation relaxation mechanisms (Bordoni type) arising from thermally activated motion of dislocations in different slip planes of h.c.f. structure. Peierls stress of dislocations giving rise to each peak have calculated based on Seeger's theory, and found to be consistent with that of f.c.c. metals. On the other hand, P sub(α) and P' sub(α) peaks grow significantly at the expense of P sub(d) and P' sub(d) peaks after neutron irradiation in deformed samples. The behaviour of these peaks as a function of irradiation dose and annealing temperatures strongly indicated that they are due to relaxations resulting from dislocations-point defects interactions (Hasiguti type). It is tentatively suggested that P sub(α) and P' sub(α) peaks are related with interactions of dislocations with divacancies and single vacancies, respectively. Application of Schiller's model showed a consistent result with regard to the P' sub(α) peak experimentally observed. (Author) [pt

  18. Storage tests with irradiated and non-irradiated onions

    International Nuclear Information System (INIS)

    Gruenewald, T.; Rumpf, G.; Troemel, I.; Bundesforschungsanstalt fuer Ernaehrung, Karlsruhe

    1978-07-01

    The results of several test series on the storage of irradiated and non-irradiated German grown onion are reported. Investigated was the influence of the irradiation conditions such as time and dose and of the storage conditions on sprouting, spoilage, browning of the vegetation centres, composition of the onions, strength and sensorial properties of seven different onion varieties. If the onions were irradiated during the dormancy period following harvest, a dose of 50 Gy (krad) was sufficient to prevent sprouting. Regarding the irradiated onions, it was not possible by variation of the storage conditions within the limits set by practical requirements to extend the dormancy period or to prevent browning of the vegetation centres, however. (orig.) 891 MG 892 RSW [de

  19. Thermal analysis of polypropylene modified by gamma irradiation composites under outdoor conditions

    International Nuclear Information System (INIS)

    Komatsu, Luiz G.H.; Oliani, Washington L.; Lugao, Ademar B.; Parra, Duclerc F.

    2015-01-01

    This work reports the influence of the clay in the degradation process of the HMSPP.The polypropylene (PP) was irradiated under acetylene atmosphere in gamma irradiation source ( 60 Co) to obtain the HMSPP (high melt strength polypropylene). Composites of HMSPP were processed in twin-screw extruder with clay Cloisite 20A and Maleic Anhydride (PP-g-MA) as coupling agent. The obtained composites were exposed under outdoor conditions for 6 months. The ageing effects were characterized by Differential Scanning Calorimetry (DSC), Thermogravimetry Analysis (TGA). Chemical oxidation was evaluated by Carbonyl Index (IC) through infrared Spectroscopy (FT-IR). The results showed correlation between carbonyl index and ageing time. (author)

  20. Thermal analysis of polypropylene modified by gamma irradiation composites under outdoor conditions

    Energy Technology Data Exchange (ETDEWEB)

    Komatsu, Luiz G.H.; Oliani, Washington L.; Lugao, Ademar B.; Parra, Duclerc F., E-mail: dfparra@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    This work reports the influence of the clay in the degradation process of the HMSPP.The polypropylene (PP) was irradiated under acetylene atmosphere in gamma irradiation source ({sup 60}Co) to obtain the HMSPP (high melt strength polypropylene). Composites of HMSPP were processed in twin-screw extruder with clay Cloisite 20A and Maleic Anhydride (PP-g-MA) as coupling agent. The obtained composites were exposed under outdoor conditions for 6 months. The ageing effects were characterized by Differential Scanning Calorimetry (DSC), Thermogravimetry Analysis (TGA). Chemical oxidation was evaluated by Carbonyl Index (IC) through infrared Spectroscopy (FT-IR). The results showed correlation between carbonyl index and ageing time. (author)

  1. Irradiation of goods

    International Nuclear Information System (INIS)

    Huebner, G.

    1992-01-01

    The necessary dose and the dosage limits to be observed depend on the kind of product and the purpose of irradiation. Product density and density distribution, product dimensions, but also packaging, transport and storage conditions are specific parameters influencing the conditions of irradiation. The kind of irradiation plant - electron accelerator or gamma plant - , its capacity, transport system and geometric arrangement of the radiation field are factors influencing the irradiation conditions as well. This is exemplified by the irradiation of 3 different products, onions, deep-frozen chicken and high-protein feed. Feasibilities and limits of the irradiation technology are demonstrated. (orig.) [de

  2. Simulation of the irradiation-induced thermo-mechanical behaviors evolution in monolithic U–Mo/Zr fuel plates under a heterogeneous irradiation condition

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Yunmei; Gong, Xin; Ding, Shurong, E-mail: dsr1971@163.com

    2015-04-15

    Highlights: • The three-dimensional stress update algorithms in a co-rotational framework are developed for U–Mo and Zircalloy with the irradiation effects. • An effective method for three-dimensional modeling of the in-pile behaviors in heterogeneously irradiated monolithic fuel plates is established and validated. • The effects of the fission-induced creep effects in the U–Mo foil are investigated in detail. • A deformation phenomenon similar to the irradiation experimental results is obtained. - Abstract: For monolithic fuel plates with U–Mo foil and Zircalloy cladding, the three-dimensional large deformation incremental constitutive relations and stress update algorithms in the co-rotational coordinate framework are developed for the fuel and cladding with their respective irradiation effects involved. Three-dimensional finite element simulation of their in-pile thermo-mechanical coupling behaviors under a location-dependent irradiation condition is implemented via the validated user-defined subroutines UMATHT and UMAT in ABAQUS. Comparison of the simulation results for two cases with or without creep considered in the U–Mo foil indicates that with the irradiation creep included (1) considerable stress-relaxation appears in the U–Mo foil, and the mechanical interaction between fuel and cladding is weakened; (2) approximately identical thickness increments in the plate and fuel foil exist and become comparably larger; (3) plastic deformation in the cladding is significantly diminished.

  3. Irradiated fuel performance evaluation technology development

    International Nuclear Information System (INIS)

    Koo, Yang Hyun; Bang, J. G.; Kim, D. H.

    2012-01-01

    Alpha version performance code for dual-cooled annular fuel under steady state operation, so called 'DUOS', has been developed applying performance models and proposed methodology. Furthermore, nonlinear finite element module which could be integrated into transient/accident fuel performance code was also developed and evaluated using commercial FE code. The first/second irradiation and PIE test of annular pellet for dual-cooled annular fuel in the world have been completed. In-pile irradiation test DB of annular pellet up to burnup of 10,000 MWd/MTU through the 1st test was established and cracking behavior of annular pellet and swelling rate at low temperature were studied. To do irradiation test of dual-cooled annular fuel under PWR's simulating steady-state conditions, irradiation test rig/rod design/manufacture of mock-up/performance test have been completed through international collaboration program with Halden reactor project. The irradiation test of large grain pellets has been continued from 2002 to 2011 and completed successfully. Burnup of 70,000 MWd/MTU which is the highest burnup among irradiation test pellets in domestic was achieved

  4. Profitability of irradiation plants

    International Nuclear Information System (INIS)

    Bustos R, M.E.; Gonzalez F, C.; Liceaga C, G.; Ortiz A, G.

    1997-01-01

    In any industrial process it is seek an attractive profit from the contractor and the social points of view. The use of the irradiation technology in foods allows keep their hygienically, which aid to food supply without risks for health, an increment of new markets and a losses reduction. In other products -cosmetics or disposable for medical use- which are sterilized by irradiation, this process allows their secure use by the consumers. The investment cost of an irradiation plant depends mainly of the plant size and the radioactive material reload that principally is Cobalt 60, these two parameters are in function of the type of products for irradiation and the selected doses. In this work it is presented the economic calculus and the financial costs for different products and capacities of plants. In general terms is determined an adequate utility that indicates that this process is profitable. According to the economic and commercial conditions in the country were considered two types of credits for the financing of this projects. One utilizing International credit resources and other with national sources. (Author)

  5. Irradiated stainless steel material constitutive model for use in the performance evaluation of PWR pressure vessel internals

    Energy Technology Data Exchange (ETDEWEB)

    Rashid, J.Y.; Dunham, R.S. [ANATECH (United States); Demma, A. [Electric Power Research Institute - EPRI (United States)

    2011-07-01

    Demonstration of component functionality requires analytical simulations of reactor internals behavior. Towards that aim, EPRI has undertaken the development of irradiated material constitutive model and damage criteria for use in global and local finite-element based functionality analysis methodology. The constitutive behavioral regimes of irradiated stainless steel types 316 and 304 materials included in the model consist of: elastic-plastic material response considering irradiation hardening of the stress-strain curve, irradiation creep, stress relaxation, and void swelling. IASCC and degradation of ductility with irradiation are the primary damage mechanisms considered in the model. The material behavior model development consists of two parts: the first part is a user-material subroutine that can interface with a general-purpose finite element computer program to adapt it to the special-purpose of functionality analysis of reactor internals. The second part is a user utility in the form of Excel Spread sheets that permit users to extract a given property, e.g. the elastic-plastic stress-strain curve, creep curve, or void-swelling curve, as function of the relevant independent variables. The development of the model takes full advantage of the significant work that has been undertaken within EPRI's Material Reliability Program (MRP) to improve the knowledge of the material properties of irradiated stainless steels. Data from EPRI's MRP database have been utilized to develop equations that characterize the yield strength, ultimate tensile strength, uniform elongation, total elongation, reduction in area, void swelling and irradiation creep of stainless steels in a PWR environment. It is noted that, while the development of the model's equations has been statistically faithful to the material database, approximations were introduced in the model to ensure appropriate conservatism in the model's application consistently with accepted

  6. The influence of internal irradiation on the endocrine system and the importance of its functional state for the development of late sequelae

    International Nuclear Information System (INIS)

    Dedov, V.I.; Norets, T.A.

    1981-01-01

    The problem of choosing and proving criteria for the estimation of their biological effect at the level of organism results from the necessity to clarify the danger of incorporation of low doses of radioactive compounds. Therefore the importance of changes in the functional state of the endocrine system for the development of late sequelae following internal irradiation was investigated. Male and female rats were injected once with 1.22x10 4 Bq/g body weight 75 Se-selenomethionine. In the blood plasma the content of thyroxine, corticosterone, testosterone, and estradiol was determined. Moreover, the conditions of adaptation and reparation processes as well as of the reproductive function were checked. A long time afterwards the male rats showed a suppression of the functions of the endocrine system which led to a suppression of the adaptive and repairing processes and of the reproductive function, to a decrease in body weight and dynamic activity. In female animals such phenomena did never occur; that is probably connected to the weakly pronounced changes in the hormonal state. The results allow to propose the hormonal state as a criterion for evaluation of the biological effect of internal irradiation. (author)

  7. Quality assurance for the IAEA International Database on Irradiated Nuclear Graphite Properties

    International Nuclear Information System (INIS)

    Wickham, A.J.; Humbert, D.

    2006-06-01

    Consideration has been given to the process of Quality Assurance applied to data entered into current versions of the IAEA International Database on Irradiated Nuclear Graphite Properties. Originally conceived simply as a means of collecting and preserving data on irradiation experiments and reactor operation, the data are increasingly being utilised for the preparation of safety arguments and in the design of new graphites for forthcoming generations of graphite-moderated plant. Under these circumstances, regulatory agencies require assurances that the data are of appropriate accuracy and correctly transcribed, that obvious errors in the original documentation are either highlighted or corrected, etc., before they are prepared to accept analyses built upon these data. The processes employed in the data transcription are described in this document, and proposals are made for the categorisation of data and for error reporting by Database users. (author)

  8. The wholesomeness of irradiated food

    International Nuclear Information System (INIS)

    Elias, P.S.; Matsuyama, A.

    1978-01-01

    It is apparent that there is a need for protection of the consumer and a need for governmental authorities to insure a safe and wholesome food supply for the population. Based on objective and scientific evidence regarding the safety of food irradiation, national and international health authorities are able to determine whether irradiated food is acceptable for human consumption. Following a thorough review of all available data, the Joint FAO/IAEA/WHO Expert Committee unconditionally approved wheat and ground wheat products and papaya irradiated for disingestation at a maximum dose of 100 krad, potatoes irradiated for sprout control at a maximum dose not exceeding 15 krad, and chicken irradiated at a maximum dose of 700 krad to reduce microbiological spoilage. Lastly, it unconditionally approved strawberries irradiated at a maximum dose of 300 krad to prolong storage. Onions at irradiated for sprout control at a maximum dose of 15 krad were temporarily approved, subject to preparation of further data on multigeneration reproduction studies on rats. Codfish and redfish eviscerated after irradiation at a maximum dose of 220 krad to reduce microbiological spoilage were also approved, based on the results of various studies in progress. Temporary, conditional approval of rice irradiated for insect disinfestation at a maximum dose of 100 krad was based on results of long-term studies on rats and monkies, available in the next review. Due to insufficient data, no decision regarding irradiated mushrooms was made. (Bell, E.)

  9. Mitigation of radiation nephropathy after internal α-particle irradiation of kidneys

    International Nuclear Information System (INIS)

    Jaggi, Jaspreet Singh; Seshan, Surya V.; McDevitt, Michael R.; Sgouros, George; Hyjek, Elizabeth; Scheinberg, David A.

    2006-01-01

    Purpose: Internal irradiation of kidneys as a consequence of radioimmunotherapy, radiation accidents, or nuclear terrorism can result in radiation nephropathy. We attempted to modify pharmacologically, the functional and morphologic changes in mouse kidneys after injection with the actinium ( 225 Ac) nanogenerator, an in vivo generator of α- and β-particle emitting elements. Methods and Materials: The animals were injected with 0.35 μCi of the 225 Ac nanogenerator, which delivers a dose of 27.6 Gy to the kidneys. Then, they were randomized to receive captopril (angiotensin-converting enzyme inhibitor), L-158,809 (angiotensin II receptor-1 blocker), spironolactone (aldosterone receptor antagonist), or a placebo. Results: Forty weeks after the 225 Ac injection, the placebo-control mice showed a significant increase in blood urea nitrogen (BUN) (87.6 ± 6.9 mg/dL), dilated Bowman spaces, and tubulolysis with basement membrane thickening. Captopril treatment accentuated the functional (BUN 119.0 ± 4.0 mg/dL; p <0.01 vs. placebo controls) and histopathologic damage. In contrast, L-158,809 offered moderate protection (BUN 66.6 ± 3.9 mg/dL; p = 0.02 vs. placebo controls). Spironolactone treatment, however, significantly prevented the development of histopathologic and functional changes (BUN 31.2 ± 2.5 mg/dL; p <0.001 vs. placebo controls). Conclusions: Low-dose spironolactone and, to a lesser extent, angiotensin receptor-1 blockade can offer renal protection in a mouse model of internal α-particle irradiation

  10. IFMIF [International Fusion Materials Irradiation Facility], an accelerator-based neutron source for fusion components irradiation testing: Materials testing capabilities

    International Nuclear Information System (INIS)

    Mann, F.M.

    1988-08-01

    The International Fusion Materials Irradiation Facility (IFMIF) is proposed as an advanced accelerator-based neutron source for high-flux irradiation testing of large-sized fusion reactor components. The facility would require only small extensions to existing accelerator and target technology originally developed for the Fusion Materials Irradiation Test (FMIT) facility. At the extended facility, neutrons would be produced by a 0.1-A beam of 35-MeV deuterons incident upon a liquid lithium target. The volume available for high-flux (>10/sup 15/ n/cm/sup 2/-s) testing in IFMITF would be over a liter, a factor of about three larger than in the FMIT facility. This is because the effective beam current of 35-MeV deuterons on target can be increased by a factor of ten to 1A or more. Such an increase can be accomplished by funneling beams of deuterium ions from the radio-frequency quadruple into a linear accelerator and by taking advantage of recent developments in accelerator technology. Multiple beams and large total current allow great variety in available testing. For example, multiple simultaneous experiments, and great flexibility in tailoring spatial distributions of flux and spectra can be achieved. 5 refs., 2 figs., 1 tab

  11. The materials irradiation experiment for testing plasma facing materials at fusion relevant conditions

    Energy Technology Data Exchange (ETDEWEB)

    Garrison, L. M., E-mail: garrisonlm@ornl.gov; Egle, B. J. [Oak Ridge National Laboratory, 1 Bethel Valley Road, Oak Ridge, Tennessee 37831 (United States); Fusion Technology Institute, University of Wisconsin-Madison, 1500 Engineering Drive, Madison, Wisconsin 53706 (United States); Zenobia, S. J.; Kulcinski, G. L.; Santarius, J. F. [Fusion Technology Institute, University of Wisconsin-Madison, 1500 Engineering Drive, Madison, Wisconsin 53706 (United States)

    2016-08-15

    The Materials Irradiation Experiment (MITE-E) was constructed at the University of Wisconsin-Madison Inertial Electrostatic Confinement Laboratory to test materials for potential use as plasma-facing materials (PFMs) in fusion reactors. PFMs in fusion reactors will be bombarded with x-rays, neutrons, and ions of hydrogen and helium. More needs to be understood about the interactions between the plasma and the materials to validate their use for fusion reactors. The MITE-E simulates some of the fusion reactor conditions by holding samples at temperatures up to 1000 °C while irradiating them with helium or deuterium ions with energies from 10 to 150 keV. The ion gun can irradiate the samples with ion currents of 20 μA–500 μA; the typical current used is 72 μA, which is an average flux of 9 × 10{sup 14} ions/(cm{sup 2} s). The ion gun uses electrostatic lenses to extract and shape the ion beam. A variable power (1-20 W), steady-state, Nd:YAG laser provides additional heating to maintain a constant sample temperature during irradiations. The ion beam current reaching the sample is directly measured and monitored in real-time during irradiations. The ion beam profile has been investigated using a copper sample sputtering experiment. The MITE-E has successfully been used to irradiate polycrystalline and single crystal tungsten samples with helium ions and will continue to be a source of important data for plasma interactions with materials.

  12. Revision of the recommended international general standard for irradiated foods and of the recommended international code of practice for the operation of radiation facilities used for the treatment of foods

    International Nuclear Information System (INIS)

    1981-11-01

    In view of the findings and statements of the Joint FAO/IAEA/WHO Expert Committee on the Wholesomeness of Irradiated Food, convened in Geneva from 27 October to 3 November 1980, a Consultation Group, convened in Geneva from 1 to 3 July 1981 suggested the revision of the Recommended International General Standard for Irradiated Foods and of the Recommended International Code of Practice for the Operation of Radiation Facilities. The proposed changes are given and justified and the revised wording of the documents presented

  13. Polarimetric analysis of a CdZnTe spectro-imager under multi-pixel irradiation conditions

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, M. [LIP-Laboratório de Instrumentação e Física Experimental de Partículas (Portugal); Physics Department, University of Coimbra, Coimbra (Portugal); Curado da Silva, R.M., E-mail: rui.silva@coimbra.lip.pt [LIP-Laboratório de Instrumentação e Física Experimental de Partículas (Portugal); Physics Department, University of Coimbra, Coimbra (Portugal); Maia, J.M. [LIP-Laboratório de Instrumentação e Física Experimental de Partículas (Portugal); Physics Department, University of Beira-Interior, Covilhã (Portugal); Simões, N. [LIP-Laboratório de Instrumentação e Física Experimental de Partículas (Portugal); Physics Department, University of Coimbra, Coimbra (Portugal); Marques, J. [LIP-Laboratório de Instrumentação e Física Experimental de Partículas (Portugal); Centro de Astrofísica, Universidade do Porto, Porto (Portugal); Pereira, L.; Trindade, A.M.F. [LIP-Laboratório de Instrumentação e Física Experimental de Partículas (Portugal); and others

    2016-12-21

    So far, polarimetry in high-energy astrophysics has been insufficiently explored due to the complexity of the required detection, electronic and signal processing systems. However, its importance is today largely recognized by the astrophysical community, therefore the next generation of high-energy space instruments will certainly provide polarimetric observations, contemporaneously with spectroscopy and imaging. We have been participating in high-energy observatory proposals submitted to ESA Cosmic Vision calls, such as GRI (Gamma-Ray Imager), DUAL and ASTROGAM, where the main instrument was a spectro-imager with polarimetric capabilities. More recently, the H2020 AHEAD project was launched with the objective to promote more coherent and mature future high-energy space mission proposals. In this context of high-energy proposal development, we have tested a CdZnTe detection plane prototype polarimeter under a partially polarized gamma-ray beam generated from an aluminum target irradiated by a {sup 22}Na (511 keV) radioactive source. The polarized beam cross section was 1 cm{sup 2}, allowing the irradiation of a wide multi-pixelated area where all the pixels operate simultaneously as a scatterer and as an absorber. The methods implemented to analyze such multi-pixel irradiation are similar to those required to analyze a spectro-imager polarimeter operating in space, since celestial source photons should irradiate its full pixilated area. Correction methods to mitigate systematic errors inherent to CdZnTe and to the experimental conditions were also implemented. The polarization level (~40%) and the polarization angle (precision of ±5° up to ±9°) obtained under multi-pixel irradiation conditions are presented and compared with simulated data.

  14. Ion beam irradiation of ceramics at fusion relevant conditions

    International Nuclear Information System (INIS)

    Zinkle, S.J.

    1991-01-01

    Ceramic materials are required at a variety of locations in proposed fusion reactors where significant ionizing and displacive fields may be present. Energetic ion beams are a useful tool for probing the effects of irradiation on the structure and electrical properties of ceramics over a wide range of experimental conditions. The advantages and disadvantages of using ion beams to provide information on anticipated ceramic radiation effects in a fusion reactor environment are discussed. In this paper particular emphasis is placed on microstructural changes and how the high helium generation rates associated with DT fusion neutrons affect cavity swelling

  15. Active and passive avoidance conditioning for rats which received x-ray irradiation in their embryonal period

    International Nuclear Information System (INIS)

    Tamaki, Yoshitaka; Inoue, Minoru; Kameyama, Yoshiro

    1983-01-01

    Fischer rats at 17 gestational days were given 200 R of x-ray, and their offsprings were subjected to conditioning of active and passive avoidance against a shuttle box stimulation. These rats irradiated in their embryonal period learned active avoidance reaction more rapidly than control rats, but it took time for them to gain passive avoidance reaction. This result seemed to suggest activated reactibility of the irradiated animals in avoiding the shuttle box stimulation. In the irradiated rats, frequency of the passive avoidance reaction increased gradually as they learned with training. (Ueda, J.)

  16. Accelerator conceptual design of the international fusion materials irradiation facility

    International Nuclear Information System (INIS)

    Sugimoto, M.; Kinsho, M.; Teplyakov, V.; Berwald, D.; Bruhwiler, D.; Peakock, M.; Rathke, J.; Deitinghoff, H.; Klein, H.; Pozimski, Y.; Volk, K.; Miyahara, A.; Olivier, M.; Piechowiak, E.; Tanabe, Y.

    1998-01-01

    The accelerator system of the international fusion materials irradiation facility (IFMIF) provides the 250-mA, 40-MeV continuous-wave deuteron beam at one of the two lithium target stations. It consists of two identical linear accelerator modules, each of which independently delivers a 125-mA beam to the common footprint of 20 cm x 5 cm at the target surface. The accelerator module consists of an ion injector, a 175 MHz RFQ and eight DTL tanks, and rf power supply system. The requirements for the accelerator system and the design concept are described. The interface issues and operational considerations to attain the proposed availability are also discussed. (orig.)

  17. Effects of Ionizing Irradiation on Mushrooms as Influenced by Physiological and Environmental Conditions

    DEFF Research Database (Denmark)

    Skou, Jens-Peder; Bech, K.; Lundsten, K.

    1974-01-01

    The effects of irradiation with β (10 MeV fast electrons)- and γ-rays were studied on several characters in strains of the cultured mushroom under different physiological and environmental conditions, including uncut and cut mushrooms, tightness of packing, and relative humidity. Weight loss was ...

  18. Peculiarities of intestine injuries in case of internal and external irradiation: a morphometric study

    International Nuclear Information System (INIS)

    Ponomareva, T.V.

    1988-01-01

    It is shown that sterological cell parameters and indexes of their interaction may serve as an important characteristic of tissue postirradiation recovery quality permitting to give a precise quantitative characteristic of cell differentiation and dedifferentiation. It is established that enterocyte maturation is sharphy broken under irradiation. Population delamination into sublines differing in cell size takes place. The number of these cells depends on radiation doses. The most labile cell componenet is cell nucleoli. The cell differentiation breakage is more pronounced in case of internal irradiation (Ce 144 ) and in combined radiation effect. A degree of cell differentiation breakage depends on peroxidation level. The obtained data can be used in developing and evaluating radioprotective substances

  19. Mechanical and irradiation properties of zirconium alloys irradiated in HANARO

    International Nuclear Information System (INIS)

    Kwon, Oh Hyun; Eom, Kyong Bo; Kim, Jae Ik; Suh, Jung Min; Jeon, Kyeong Lak

    2011-01-01

    These experimental studies are carried out to build a database for analyzing fuel performance in nuclear power plants. In particular, this study focuses on the mechanical and irradiation properties of three kinds of zirconium alloy (Alloy A, Alloy B and Alloy C) irradiated in the HANARO (High-flux Advanced Neutron Application Reactor), one of the leading multipurpose research reactors in the world. Yield strength and ultimate tensile strength were measured to determine the mechanical properties before and after irradiation, while irradiation growth was measured for the irradiation properties. The samples for irradiation testing are classified by texture. For the irradiation condition, all samples were wrapped into the capsule (07M-13N) and irradiated in the HANARO for about 100 days (E > 1.0 MeV, 1.1 10 21 n/cm 2 ). These tests and results indicate that the mechanical properties of zirconium alloys are similar whether unirradiated or irradiated. Alloy B has shown the highest yield strength and tensile strength properties compared to other alloys in irradiated condition. Even though each of the zirconium alloys has a different alloying content, this content does not seem to affect the mechanical properties under an unirradiated condition and low fluence. And all the alloys have shown the tendency to increase in yield strength and ultimate tensile strength. Transverse specimens of each of the zirconium alloys have a slightly lower irradiation growth tendency than longitudinal specimens. However, for clear analysis of texture effects, further testing under higher irradiation conditions is needed

  20. Exploring valid internal-control genes in Porphyra yezoensis (Bangiaceae) during stress response conditions

    Science.gov (United States)

    Wang, Wenlei; Wu, Xiaojie; Wang, Chao; Jia, Zhaojun; He, Linwen; Wei, Yifan; Niu, Jianfeng; Wang, Guangce

    2014-07-01

    To screen the stable expression genes related to the stress (strong light, dehydration and temperature shock) we applied Absolute real-time PCR technology to determine the transcription numbers of the selected test genes in P orphyra yezoensis, which has been regarded as a potential model species responding the stress conditions in the intertidal. Absolute real-time PCR technology was applied to determine the transcription numbers of the selected test genes in P orphyra yezoensis, which has been regarded as a potential model species in stress responding. According to the results of photosynthesis parameters, we observed that Y(II) and F v/ F m were significantly affected when stress was imposed on the thalli of P orphyra yezoensis, but underwent almost completely recovered under normal conditions, which were collected for the following experiments. Then three samples, which were treated with different grade stresses combined with salinity, irradiation and temperature, were collected. The transcription numbers of seven constitutive expression genes in above samples were determined after RNA extraction and cDNA synthesis. Finally, a general insight into the selection of internal control genes during stress response was obtained. We found that there were no obvious effects in terms of salinity stress (at salinity 90) on transcription of most genes used in the study. The 18S ribosomal RNA gene had the highest expression level, varying remarkably among different tested groups. RPS8 expression showed a high irregular variance between samples. GAPDH presented comparatively stable expression and could thus be selected as the internal control. EF-1α showed stable expression during the series of multiple-stress tests. Our research provided available references for the selection of internal control genes for transcripts determination of P. yezoensis.

  1. Fractionated total body irradiation; the gastrointestinal toxicity versus the conditioning effect for bone marrow transplantation with different fractionation schedules

    International Nuclear Information System (INIS)

    Walma, E.P.; Klapwijk, W.M.; Miller, A.M.

    1982-01-01

    In most cases, bone marrow transplantation is preceded by a conditioning regimen employing irradiation and/or cytotoxic drugs. The authors are searching for better fractionation schedules in order to optimize the conditioning regimen prior to transplantation of stem-cell-enriched bone marrow. They have determined damage to the gastrointestinal tract in dogs and mice after total body irradiation in mice and dogs following a number of fractionation schedules, and these results are presented. The schedules were chosen such as to minimize the interval between irradiation and the bone marrow transplantation and to maximize clinical feasibility. (Auth./C.F.)

  2. Effects of temperature, packaging and electron beam irradiation processing conditions on the property behaviour of Poly (ether-block-amide) blends

    Energy Technology Data Exchange (ETDEWEB)

    Murray, Kieran A., E-mail: kmurray@research.ait.ie [Materials Research Institute, Athlone Institute of Technology, Dublin Road, Athlone, Co. Westmeath (Ireland); Kennedy, James E., E-mail: jkennedy@ait.ie [Materials Research Institute, Athlone Institute of Technology, Dublin Road, Athlone, Co. Westmeath (Ireland); McEvoy, Brian, E-mail: Brian.Mcevoy@synergyhealthplc.com [Synergy Health, IDA Business and Technology Park, Sragh, Tullamore, Co. Offaly (Ireland); Vrain, Olivier, E-mail: Olivier.Vrain@synergyhealthplc.com [Synergy Health, IDA Business and Technology Park, Sragh, Tullamore, Co. Offaly (Ireland); Ryan, Damien, E-mail: Damien.Ryan@synergyhealthplc.com [Synergy Health, IDA Business and Technology Park, Sragh, Tullamore, Co. Offaly (Ireland); Cowman, Richard, E-mail: Richard.Cowman@synergyhealthplc.com [Synergy Health, IDA Business and Technology Park, Sragh, Tullamore, Co. Offaly (Ireland); Higginbotham, Clement L., E-mail: chigginbotham@ait.ie [Materials Research Institute, Athlone Institute of Technology, Dublin Road, Athlone, Co. Westmeath (Ireland)

    2014-06-01

    The radiation stability of Poly (ether-block-amide) (PEBA) blended with a multifunctional phenolic antioxidant and a hindered amide light stabiliser was examined under various temperatures, packaging and electron beam processing conditions. FTIR revealed that there were slight alterations to the PEBA before irradiation; however, these became more pronounced following irradiation. The effect of varying the temperature, packaging and processing conditions on the resultant PEBA properties was apparent. For example, rheology demonstrated that the structural properties could be enhanced by manipulating the aforementioned criteria. Mechanical testing exhibited less radiation resistance when the PEBA samples were vacuum packed and exposed to irradiation. MFI and AFM confirmed that the melting strength and surface topography could be reduced/increased depending on the conditions employed. From this study it was concluded that virgin PEBA submerged in dry ice with non-vacuum packaging during the irradiation process, provided excellent radiation resistance (20.9% improvement) in contrast to the traditional method. - Highlights: • PEBA was melt blended with Irganox 565 and Tinuvin 783. • All virgin and blended PEBA samples were exposed to electron beam irradiation. • Virgin and blended PEBA was exposed to different temperatures during irradiation. • Non-vacuum and vacuum packed PEBA samples were compared following irradiation. • Virgin PEBA with non-vacuum packaging in dry ice improved the radiation resistance.

  3. Effects of temperature, packaging and electron beam irradiation processing conditions on the property behaviour of Poly (ether-block-amide) blends

    International Nuclear Information System (INIS)

    Murray, Kieran A.; Kennedy, James E.; McEvoy, Brian; Vrain, Olivier; Ryan, Damien; Cowman, Richard; Higginbotham, Clement L.

    2014-01-01

    The radiation stability of Poly (ether-block-amide) (PEBA) blended with a multifunctional phenolic antioxidant and a hindered amide light stabiliser was examined under various temperatures, packaging and electron beam processing conditions. FTIR revealed that there were slight alterations to the PEBA before irradiation; however, these became more pronounced following irradiation. The effect of varying the temperature, packaging and processing conditions on the resultant PEBA properties was apparent. For example, rheology demonstrated that the structural properties could be enhanced by manipulating the aforementioned criteria. Mechanical testing exhibited less radiation resistance when the PEBA samples were vacuum packed and exposed to irradiation. MFI and AFM confirmed that the melting strength and surface topography could be reduced/increased depending on the conditions employed. From this study it was concluded that virgin PEBA submerged in dry ice with non-vacuum packaging during the irradiation process, provided excellent radiation resistance (20.9% improvement) in contrast to the traditional method. - Highlights: • PEBA was melt blended with Irganox 565 and Tinuvin 783. • All virgin and blended PEBA samples were exposed to electron beam irradiation. • Virgin and blended PEBA was exposed to different temperatures during irradiation. • Non-vacuum and vacuum packed PEBA samples were compared following irradiation. • Virgin PEBA with non-vacuum packaging in dry ice improved the radiation resistance

  4. Staged deployment of the International Fusion Materials Irradiation Facility

    International Nuclear Information System (INIS)

    Takeuchi, H.; Sugimoto, M.; Nakamura, H.

    2001-01-01

    The International Fusion Materials Irradiation Facility (IFMIF) employs an accelerator based D-Li intense neutron source as defined in the 1995-96 Conceptual Design Activity (CDA) study. In 1999, IEA mandated a review of the CDA IFMIF design for cost reduction without change to its original mission. This objective was accomplished by eliminating the previously assumed possibility of potential upgrade of IFMIF beyond the user requirements. The total estimated cost was reduced from $797.2 M to $487.8 M. An option of deployment in 3 stages was also examined to reduce the initial investment and annual expenditures during construction. In this scenario, full performance is achieved gradually with each interim stage as follows. 1st Stage: 20% operation for material selection for ITER breeding blanket, 2nd Stage: 50% operation to demonstrate materials performance of a reference alloy for DEMO, 3rd Stage: full performance operation ( 2MW/m 2 at 500cm 3 ) to obtain engineering data for potential DEMO materials under irradiation up to 100-200 dpa. In summary, the new, reduced cost IFMIF design and staged deployment still satisfies the original mission. The estimated cost of the 1st Stage facility is only $303.6 M making it financially much more attractive. Currently, IFMIF Key Element Technology Phase (KEP) is underway to reduce the key technology risk factors. (author)

  5. Transformation of avobenzone in conditions of aquatic chlorination and UV-irradiation.

    Science.gov (United States)

    Trebše, Polonca; Polyakova, Olga V; Baranova, Maria; Kralj, Mojca Bavcon; Dolenc, Darko; Sarakha, Mohamed; Kutin, Alexander; Lebedev, Albert T

    2016-09-15

    Emerging contaminants represent a wide group of the most different compounds. They appear in the environment at trace levels due to human activity. Most of these compounds are not yet regulated. Sunscreen UV-filters play an important role among these emerging contaminants. In the present research the reactions of 4-tert-butyl-4'-methoxydibenzoylmethane (avobenzone), the most common UV filter in the formulation of sunscreens, were studied under the combined influence of active chlorine and UV-irradiation. Twenty five compounds were identified by GC/MS as transformation products of avobenzone in reactions of aquatic UV-irradiation and chlorination with sodium hypochlorite. A complete scheme of transformation of avobenzone covering all the semivolatile products is proposed. The identification of the two primary chlorination products (2-chloro-1-(4-tert-butylphenyl)-3-(4-methoxyphenyl)-1,3-propanedione and 2,2-dichloro-1-(4-tert-butylphenyl)-3-(4-methoxyphenyl)-1,3-propanedione) was confirmed by their synthesis and GC/MS and NMR analysis. Although the toxicities of the majority of these products remain unknown substituted chlorinated phenols and acetophenones are known to be rather toxic. Combined action of active chlorine and UV-irradiation results in the formation of some products (chloroanhydrides, chlorophenols) not forming in conditions of separate application of these disinfection methods. Therefore caring for people «well-being» it is of great importance to apply the most appropriate disinfection method. Since the primary transformation products partially resist powerful UV-C irradiation they may be treated as stable and persistent pollutants. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Dry Storage at long term of nuclear fuels: Influence of the fuel design and commercial irradiation conditions

    International Nuclear Information System (INIS)

    Marino, Armando C

    2009-01-01

    The BaCo code was applied to simulate the behaviour for a PHWR fuel under storage conditions showing a strong dependence on the original design of the fuel and the irradiation history. In particular, the results of the statistical analysis of BaCo indicate that the integrity of the fuel is influenced by the manufacture tolerances and the solicitations during the NPP irradiation. The main conclusion of the present study is that the fuel temperature of the device should be carefully controlled in order to ensure safe storage conditions. [es

  7. Thermohydraulic design of saturated temperature capsule for IASCC irradiation test

    International Nuclear Information System (INIS)

    Ide, Hiroshi; Matsui, Yoshinori; Itabashi, Yukio

    2002-10-01

    An advanced water chemistry controlled irradiation research device is being developed in JAERI, to perform irradiation tests for irradiation assisted stress corrosion cracking (IASCC) research concerned with aging of LWR. This device enables the irradiation tests under the water chemistry condition and the temperature, which simulate the conditions for BWR core internals. The advanced water chemistry controlled irradiation research device is composed of saturated temperature capsule inserted into the JMTR core and the water chemistry control unit installed in the reactor building. Regarding the saturated temperature capsule, the Thermohydraulic design of capsule structure was done, aimed at controlling the specimen's temperature, feeding water velocity on specimen's surface to the environment of BWR nearer. As the result of adopting the new capsule structure based on the design study, it was found out that feeding water velocity at the surface of specimen's is increased to about 10 times as much as before, and nuclear heat generated in the capsule components can be removed safely even in the abnormal event such as the case of loss of feeding water. (author)

  8. Thermohydraulic design of saturated temperature capsule for IASCC irradiation test

    Energy Technology Data Exchange (ETDEWEB)

    Ide, Hiroshi; Matsui, Yoshinori; Itabashi, Yukio [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment] [and others

    2002-10-01

    An advanced water chemistry controlled irradiation research device is being developed in JAERI, to perform irradiation tests for irradiation assisted stress corrosion cracking (IASCC) research concerned with aging of LWR. This device enables the irradiation tests under the water chemistry condition and the temperature, which simulate the conditions for BWR core internals. The advanced water chemistry controlled irradiation research device is composed of saturated temperature capsule inserted into the JMTR core and the water chemistry control unit installed in the reactor building. Regarding the saturated temperature capsule, the Thermohydraulic design of capsule structure was done, aimed at controlling the specimen's temperature, feeding water velocity on specimen's surface to the environment of BWR nearer. As the result of adopting the new capsule structure based on the design study, it was found out that feeding water velocity at the surface of specimen's is increased to about 10 times as much as before, and nuclear heat generated in the capsule components can be removed safely even in the abnormal event such as the case of loss of feeding water. (author)

  9. Use of studies with laboratory animals to assess the potential early health effects of combined internal alpha and beta irradiation

    International Nuclear Information System (INIS)

    Scott, B.R.; Hahn, F.F.; Guilmette, R.A.; Muggenburg, B.A.; Snipes, M.B.; Boecker, B.B.; McClellan, R.O.

    1986-01-01

    The potential health impacts of radionuclides released in nuclear accidents are of major concern to the public and to regulatory and other governmental agencies. One mode of potential exposure is by inhalation of airborne radionuclides, which could lead to combined internal irradiation by high (alpha) and low (beta) linear energy transfer (LET) radiations. Epidemiological data for health effects of human inhalation exposure are too limited to derive reliable estimates of risks of potential health effects. However, results of studies in which beagle dogs were exposed by inhalation to insoluble radioactive aerosols can be used to estimate expected effects in humans. Data for mortality from radiation pneumonitis and pulmonary fibrosis caused by internal irradiation of dog lungs by alpha or beta radiations are used to derive the relative biological effectiveness (RBE) of alpha irradiation compared to beta irradiation; predict the expected combined effects of alpha and beta irradiation of dog lungs; and extrapolate the results to humans. The extrapolation to humans assumed that, for similar ages at exposure, dog and human lungs have similar sensitivities to lung irradiation. Results of theoretical calculations related to mortality from early effects indicated that the synergistic effects of high- and low-LET radiations should depend on the percentages of the total dose contributed by high- and low-LET radiations, and for very low or very high doses, synergistic effects should be negligible. 23 refs., 8 figs

  10. Biodiesel production by esterification of oleic acid with short-chain alcohols under ultrasonic irradiation condition

    Energy Technology Data Exchange (ETDEWEB)

    Hanh, Hoang Duc; Okitsu, Kenji; Nishimura, Rokuro; Maeda, Yasuaki [Department of Applied Material Science, Graduate School of Engineering, Osaka Prefecture University, Gakuen-cho 1-1, Sakai, Osaka 599-8531 (Japan); Dong, Nguyen The [Institute of Environmental Technology, Vietnamese Academy of Science and Technology, 18 Hoang Quoc Viet, Cau Giay, Hanoi (Viet Nam)

    2009-03-15

    Production of fatty acid ethyl ester (FAEE) from oleic acid (FFA) with short-chain alcohols (ethanol, propanol, and butanol) under ultrasonic irradiation was investigated in this work. Batch esterification of oleic acid was carried out to study the effect of: test temperatures of 10-60 C, molar ratios of alcohol to oleic acid of 1:1-10:1, quantity of catalysts of 0.5-10% (wt of sulfuric acid/wt of oleic acid) and irradiation times of 10 h. The optimum condition for the esterification process was molar ratio of alcohol to oleic acid at 3:1 with 5 wt% of H{sub 2}SO{sub 4} at 60 C with an irradiation time of 2 h. (author)

  11. Sterilization efficacy of ultraviolet irradiation on microbial aerosols under dynamic airflow by experimental air conditioning systems

    International Nuclear Information System (INIS)

    Nakamura, Hiroshi

    1987-01-01

    In order to know the sterilization efficacy of ultraviolet irradiation on microbial aerosols, the size and the weight of the aerosol particles were evaluated, and these were irradiated under dynamic air flow created by an experimental air conditioning system. The experimental apparatus consisted of a high efficiency particulate air (HEPA) filter, an aerosol generator, spiral UV lamps placed around a quart glass tube, an Andersen air sampler and a vacuum pump. They were connected serially by stainless steel ducts (85 mm in diameter, 8 m in length). Six types of microbial aerosols generated from an ultrasonic nebulizer were irradiated by UV rays (wavelength 254 nm, mean density 9400 μW/cm 2 ). Their irradiation time ranged from 1.0 to 0.0625 seconds. The microbial aerosols were collected onto the trypticase soy agar (TSA) medium in the Andersen air sampler. After incubation, the number of colony forming units (CFU) were counted, and converted to particle counts. The diameter of microbial aerosol particles calculated by their log normal distribution were found to match the diameter of a single bacteria cell measured by a microscope. The sterilization efficacy of UV in standard airflow conditions (0.5 sec. irradiation) were found to be over 99.5 % in Staphylococcus aureus, Staphylococcus epidermidis, Serratia marcescens, Bacillus subtilis (vegetative cell) and Bacillus subtilis (spore) and 67 % in Aspergillus niger (conidium). In A. niger, which was the most resistant microbe to UV irradiation, the efficacy rose up to 79 % when irradiated for 1.0 sec., and it was observed that the growth speed of the colonies was slower than that of the controls. It was thought that UV rays caused some damage to the proliferation of A. niger cells. (author)

  12. Radiation cancer in man, especially on the cases developed after irradiation for malignant conditions

    International Nuclear Information System (INIS)

    Kikuchi, Akira

    1975-01-01

    Twelve cases in which radiation cancer was observed at the Tohoku University are reported. Half of them had been treated for tuberculous cervical lymphadenitis, one for lupus vulgaris and five for various malignant conditions. The average latent period was 27 years in 7 cases which were treated for benign conditions and 13 years in 5 cases treated for malignant conditions. In Japan, 12 cases of radiation cancer after irradiation for malignant conditions, excluding leukemia, have been reported. The clinical features of these 17 cases in addition to 5 cases are reviewed. (auth.)

  13. Radiation cancer in man, especially on the cases developed after irradiation for malignant conditions

    Energy Technology Data Exchange (ETDEWEB)

    Kikuchi, A [Tohoku Univ., Sendai (Japan). School of Medicine

    1975-06-01

    Twelve cases in which radiation cancer was observed at the Tohoku University are reported. Half of them had been treated for tuberculous cervical lymphadenitis, one for lupus vulgaris and five for various malignant conditions. The average latent period was 27 years in 7 cases which were treated for benign conditions and 13 years in 5 cases treated for malignant conditions. In Japan, 12 cases of radiation cancer after irradiation for malignant conditions, excluding leukemia, have been reported. The clinical features of these 17 cases in addition to 5 cases are reviewed.

  14. Health condition of children irradiated in utero

    Energy Technology Data Exchange (ETDEWEB)

    Stepanova, E [Research Center for Radiation Medicine, Kiev (Ukraine)

    1997-09-01

    Among the children exposed to ionizing radiation, the ones irradiated in utero constitute a group under special surveillance. The greatest sensitivity of the organism to the effects of radiative factors occurs in the neonatal period of development and the forthcoming life span with irradiation effects is the longest for these children. Children with acute exposure, with chronic exposure and control group were encompassed by this study - 1144 children altogether. 9 figs, 2 tabs.

  15. Health condition of children irradiated in utero

    International Nuclear Information System (INIS)

    Stepanova, E.

    1997-01-01

    Among the children exposed to ionizing radiation, the ones irradiated in utero constitute a group under special surveillance. The greatest sensitivity of the organism to the effects of radiative factors occurs in the neonatal period of development and the forthcoming life span with irradiation effects is the longest for these children. Children with acute exposure, with chronic exposure and control group were encompassed by this study - 1144 children altogether. 9 figs, 2 tabs

  16. Accelerator conceptual design of the international fusion materials irradiation facility

    Energy Technology Data Exchange (ETDEWEB)

    Sugimoto, M.; Kinsho, M. [Japan Atomic Energy Res. Inst., Tokai, Ibaraki (Japan). Intense Neutron Source Lab.; Jameson, R.A.; Blind, B. [Los Alamos National Lab., NM (United States); Teplyakov, V. [Institute for High Energy Physics, Moscow (Russian Federation); Berwald, D.; Bruhwiler, D.; Peakock, M.; Rathke, J. [Northrop Grumman Corp., Bethpage, NY (United States); Deitinghoff, H.; Klein, H.; Pozimski, Y.; Volk, K. [Johann Wolfgang Goethe Univ., Frankfurt (Germany). Inst. fur Angewandte Phys.; Ferdinand, R.; Lagniel, J.-M. [CEA Saclay LNS, Gif-sur-Yvette (France); Miyahara, A. [Teikyo Univ., Tokyo (Japan); Olivier, M. [CEA DSM, Saclay, Gif-sur-Yvette (France); Piechowiak, E. [Northrop Grumman Corp., Baltimore, MD (United States); Tanabe, Y. [Toshiba Corp., Tsurumi-ku, Yokohama (Japan)

    1998-10-01

    The accelerator system of the international fusion materials irradiation facility (IFMIF) provides the 250-mA, 40-MeV continuous-wave deuteron beam at one of the two lithium target stations. It consists of two identical linear accelerator modules, each of which independently delivers a 125-mA beam to the common footprint of 20 cm x 5 cm at the target surface. The accelerator module consists of an ion injector, a 175 MHz RFQ and eight DTL tanks, and rf power supply system. The requirements for the accelerator system and the design concept are described. The interface issues and operational considerations to attain the proposed availability are also discussed. (orig.) 8 refs.

  17. Effects of operating conditions on molten-salt electrorefining for zirconium recovery from irradiated Zircaloy-4 cladding of pressurized water reactor

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jaeyeong, E-mail: d486916@snu.ac.kr [Department of Nuclear Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 151-742 (Korea, Republic of); Choi, Sungyeol [Korea Atomic Energy Research Institute, 1045 Daedeok-daero, Yuseong-gu, Daejeon 305-353 (Korea, Republic of); Sohn, Sungjune [Department of Nuclear Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 151-742 (Korea, Republic of); Kim, Kwang-Rag [Korea Atomic Energy Research Institute, 1045 Daedeok-daero, Yuseong-gu, Daejeon 305-353 (Korea, Republic of); Hwang, Il Soon [Department of Nuclear Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 151-742 (Korea, Republic of)

    2014-08-15

    Highlights: • Computational simulation on electrorefining of irradiated Zircaloy-4 cladding. • Composition of irradiated Zircaloy-4 cladding of pressurized water reactor. • Redox behavior of elements in irradiated Zircaloy cladding during electrorefining. • Effect of electrorefining operating conditions on decontamination factor. - Abstract: To reduce the final waste volume from used nuclear fuel assembly, it is significant to decontaminate irradiated cladding. Electrorefining in high temperature molten salt could be one of volume decontamination processes for the cladding. This study examines the effect of operating conditions on decontamination factor in electrorefining of irradiated Zircaloy-4 cladding of pressurized water reactor. One-dimensional time-dependent electrochemical reaction code, REFIN, was utilized for simulating irradiated cladding electrorefining. Composition of irradiated Zircaloy was estimated based on ORIGEN-2 and other literatures. Co and U were considered in electrorefining simulation with major elements of Zircaloy-4 to represent activation products and actinides penetrating into the cladding respectively. Total 240 cases of electrorefining are simulated including 8 diffusion boundary layer thicknesses, 10 concentrations of contaminated molten salt and 3 termination conditions. Decontamination factors for each case were evaluated and it is revealed that the radioactivity of Co-60 in recovered zirconium on cathode could decrease below the clearance level when initial concentration of chlorides except ZrCl{sub 4} is lower than 1 × 10{sup −11} weight fraction if electrorefining is finished before anode potential reaches −1.8 V (vs. Cl{sub 2}/Cl{sup −})

  18. Effects of temperature, packaging and electron beam irradiation processing conditions on the property behaviour of Poly (ether-block-amide) blends.

    Science.gov (United States)

    Murray, Kieran A; Kennedy, James E; McEvoy, Brian; Vrain, Olivier; Ryan, Damien; Cowman, Richard; Higginbotham, Clement L

    2014-06-01

    The radiation stability of Poly (ether-block-amide) (PEBA) blended with a multifunctional phenolic antioxidant and a hindered amide light stabiliser was examined under various temperatures, packaging and electron beam processing conditions. FTIR revealed that there were slight alterations to the PEBA before irradiation; however, these became more pronounced following irradiation. The effect of varying the temperature, packaging and processing conditions on the resultant PEBA properties was apparent. For example, rheology demonstrated that the structural properties could be enhanced by manipulating the aforementioned criteria. Mechanical testing exhibited less radiation resistance when the PEBA samples were vacuum packed and exposed to irradiation. MFI and AFM confirmed that the melting strength and surface topography could be reduced/increased depending on the conditions employed. From this study it was concluded that virgin PEBA submerged in dry ice with non-vacuum packaging during the irradiation process, provided excellent radiation resistance (20.9% improvement) in contrast to the traditional method. Copyright © 2014. Published by Elsevier B.V.

  19. Ultraviolet irradiation of bacteria under anaerobic conditions: implications for Prephanerozoic evolution

    International Nuclear Information System (INIS)

    Rambler, M.B.

    1980-01-01

    The history of the rise of atmospheric oxygen and subsequent time of development of an ultraviolet light screening ozone layer has far reaching consequences in interpreting Prephanerozoic (4.5 to 0.6 billion years ago) evolution and ecology. A special anaerobic glove box was constructed to study the relative sensitivities of different groups of bacteria to uv light under varying conditions. Although there is no concensus concerning the oxygen concentration in the early atmosphere, total anoxic conditions were assumed in these studies. The flux of the uv radiation at 253.7 nm within the chamber is slightly higher than calculated from estimates of the present solar luminosity constant at this wavelength. Strict anaerobes, possibly direct decendants from early reducing conditions on Earth (e.g. Clostridium), facultative anaerobes (e.g. Escherichia, Enterobacter), and aerobes (e.g. Pseudomonas) were irradiated and examined for survival as a function of uv dosage. In these studies, photoreactivation, the amelioration of uv damage by visible light, was demonstrated for the first time to exist in an obligate anaerobe. The number of cells in unprotected cultures, exposed to 20 minutes of uv radiation is generally reduced by 99.9%. However, several mechanisms of protection were found: (1) photoreactivation, (2) absorption of uv by nitrates in aqueous irradiation media, (3) intertwiningof growing filaments into cohesive structures called mats, e.g. the matting habit, (4) dark enzymatic repair of photodamage; and (5) inherent radiation resistance. These experimental results coupled with a literature review of uv effects strongly suggests that the Berkner-Marshall hypothesis is no longer tenable

  20. Irradiation conditions for fiber laser bonding of HAp-glass ceramics with bovine cortical bone.

    Science.gov (United States)

    Tadano, Shigeru; Yamada, Satoshi; Kanaoka, Masaru

    2014-01-01

    Orthopedic implants are widely used to repair bones and to replace articulating joint surfaces. It is important to develop an instantaneous technique for the direct bonding of bone and implant materials. The aim of this study was to develop a technique for the laser bonding of bone with an implant material like ceramics. Ceramic specimens (10 mm diameter and 1 mm thickness) were sintered with hydroxyapatite and MgO-Al2O3-SiO2 glass powders mixed in 40:60 wt% proportions. A small hole was bored at the center of a ceramic specimen. The ceramic specimen was positioned onto a bovine bone specimen and a 5 mm diameter area of the ceramic specimen was irradiated using a fiber laser beam (1070-1080 nm wavelength). As a result, the bone and the ceramic specimens bonded strongly under the irradiation conditions of a 400 W laser power and a 1.0 s exposure time. The maximum shear strength was 5.3 ± 2.3 N. A bonding substance that penetrated deeply into the bone specimen was generated around the hole in the ceramic specimen. On using the fiber laser, the ceramic specimen instantaneously bonded to the bone specimen. Further, the irradiation conditions required for the bonding were investigated.

  1. Food irradiation 2009

    International Nuclear Information System (INIS)

    Narvaiz, Patricia

    2009-01-01

    Food irradiation principles; its main applications, advantages and limitations; wholesomeness, present activities at Ezeiza Atomic Centre; research coordinated by the International Atomic Energy Agency; capacity building; and some aspects on national and international regulations, standards and commercialization are briefly described. At present 56 countries authorize the consumption of varied irradiated foods; trade is performed in 32 countries, with about 200 irradiation facilities. Argentina pioneered nuclear energy knowledge and applications in Latin America, food irradiation included. A steady growth of food industrial volumes treated in two gamma facilities can be observed. Food industry and producers show interest towards new facilities construction. However, a 15 years standstill in incorporating new approvals in the Argentine Alimentary Code, in spite of consecutive request performed either by CNEA or some food industries restricts, a wider industrial implementation, which constitute a drawback to future regional commercialization in areas such as MERCOSUR, where Brazil since 2000 freely authorize food irradiation. Besides, important chances in international trade with developed countries will be missed, like the high fresh fruits and vegetables requirements United States has in counter-season, leading to convenient sale prices. The Argentine food irradiation facilities have been designed and built in the country. Argentina produces Cobalt-60. These capacities, unusual in the world and particularly in Latin America, should be protected and enhanced. Being the irradiation facilities scarce and concentrated nearby Buenos Aires city, the possibilities of commercial application and even research and development are strongly limited for most of the country regions. (author) [es

  2. Saturation behavior of irradiation hardening in F82H irradiated in the HFIR

    Energy Technology Data Exchange (ETDEWEB)

    Hirose, T. [Blanket Engineering Group, Japan Atomic Energy Agency, Naka, Ibaraki (Japan); Shiba, K.; Tanigawa, H.; Ando, M. [Japan Atomic Energy Agency, Tokai-mura, Naga-gun, Ibaraki-ken (Japan); Klueh, R.L. [Oak Ridge National Laboratory, TN (United States); Stoller, R. [ORNL - Oak Ridge National Laboratory, Materials Science and Technology Div., Oak Ridge, AK TN (United States)

    2007-07-01

    Full text of publication follows: Post irradiation tensile tests on reduced activation ferritic/martensitic steel, F82H have been conducted over the past two decades using Japan Materials Testing Reactor (JMTR) of JAEA, and Fast Flux Testing Facility (FFTF) of PNNL and High Flux Isotope Reactor (HFIR) of ORNL, USA, under Japan/US collaboration programs. According to these results, F82H does not demonstrate irradiation hardening above 673 K up to 60 dpa. The current study has been concentrated on hardening behavior at temperature around 573 K. A series of low temperature irradiation experiment has been conducted at the HFIR under the international collaborative research between JAEA/US-DOE. In this collaboration, the irradiation condition is precisely controlled by the well matured capsule designing and instrumentation. This paper summarizes recent results of the irradiation experiments focused on F82H and its modified steels compared with the irradiation properties database on F82H. Post irradiation tensile tests have been conducted on the F82H and its modified steels irradiated at 573 K and the dose level was up to 25 dpa. According to these results, irradiation hardening of F82H is saturated by 9 dpa and the as-irradiated 0.2 % proof stress is less than 1 GPa at ambient temperature. The deterioration of total elongation was also saturated by 9 dpa irradiation. The ductility of some modified steels which showed larger total elongation than that of F82H before irradiation become the same level as that of standard F82H steel after irradiation, even though its magnitude of irradiation hardening is smaller than that of F82H. This suggests that the more ductile steel demonstrates the more ductility loss at this temperature, regardless to the hardening level. The difference in ductility loss behavior between various tensile specimens will be discussed as the ductility could depend on the specimen dimension. (authors)

  3. Behavior of defective LWR-type fuel rods irradiated under postulated accident conditions

    International Nuclear Information System (INIS)

    Hobbins, R.R.; Croucher, D.W.; Seiffert, S.L.; Cook, B.A.; Kerwin, D.K.; Mehner, A.S.; Ploger, S.A.

    1979-05-01

    The irradiation experiments reported here have been conducted by the Thermal Fuels Behavior Program of EG and G Idaho, Inc., for the United States Nuclear Regulatory Commission in the Power Burst Facility (PBF) at the Idaho National Engineering Laboratory. Five of the rods were irradiated in PCM tests and one in a LOC test. During these tests, the six rods lost cladding integrity prior to or during the transient phase of the test due to either manufacturing defects or intentional rod design and operation. Of the five defective rods tested under PCM conditions, one (Rod IE-008, Test IE-1) had a hydride rupture below the region of the rod, which was in film boiling during the transient; two (Rod A-0021, Test PCM-3 and Rod IE-019, Test IE-5) contained defects (a pin hole and a small axial crack, respectively) within the film boiling zone; and two (Rod 201-1, Test PCM-1 and Rod 205-8, Test PCM-5) failed by cladding embrittlement within the film boiling zone. Rod 312-3 was waterlogged before being subjected to LOC conditions in Test LLR-3

  4. In Situ Irradiation and Measurement of Triple Junction Solar Cells at Low Intensity, Low Temperature (LILT) Conditions

    Science.gov (United States)

    Harris, R.D.; Imaizumi, M.; Walters, R.J.; Lorentzen, J.R.; Messenger, S.R.; Tischler, J.G.; Ohshima, T.; Sato, S.; Sharps, P.R.; Fatemi, N.S.

    2008-01-01

    The performance of triple junction InGaP/(In)GaAs/Ge space solar cells was studied following high energy electron irradiation at low temperature. Cell characterization was carried out in situ at the irradiation temperature while using low intensity illumination, and, as such, these conditions reflect those found for deep space, solar powered missions that are far from the sun. Cell characterization consisted of I-V measurements and quantum efficiency measurements. The low temperature irradiations caused substantial degradation that differs in some ways from that seen after room temperature irradiations. The short circuit current degrades more at low temperature while the open circuit voltage degrades more at room temperature. A room temperature anneal after the low temperature irradiation produced a substantial recovery in the degradation. Following irradiation at both temperatures and an extended room temperature anneal, quantum efficiency measurement suggests that the bulk of the remaining damage is in the (In)GaAs sub-cell

  5. Whole-Pin Furnace system: An experimental facility for studying irradiated fuel pin behavior under potential reactor accident conditions

    International Nuclear Information System (INIS)

    Liu, Y.Y.; Tsai, H.C.; Donahue, D.A.; Pushis, D.O.; Savoie, F.E.; Holland, J.W.; Wright, A.E.; August, C.; Bailey, J.L.; Patterson, D.R.

    1990-05-01

    The whole-pin furnace system is a new in-cell experimental facility constructed to investigate how irradiated fuel pins may fail under potential reactor accident conditions. Extensive checkouts have demonstrated excellent performance in remote operation, temperature control, pin breach detection, and fission gas handling. The system is currently being used in testing of EBIR-II-irradiated Integral Fast Reactor (IFR) metal fuel pins; future testing will include EBR-II-irradiated mixed-oxide fuel pins. 7 refs., 4 figs

  6. The survey of blood irradiation equipment. About the present condition and a problem

    International Nuclear Information System (INIS)

    Irikawa, Tomio; Kuramitsu, Hideaki; Tanaka, Keiko; Hamamoto, Takaaki

    2001-01-01

    Once it shows the symptoms of post transfusion graft versus host disease, mostly all examples follow fatal progress. For this reason, generally 15-50 Gy irradiation is performed into the blood for transfusion by the ''guideline of radiation'' of the Japan society of blood transfusion as measure only in development-of-symptoms prevention. This time, the questionnaire was performed for the hospital of 100 institutions of the Chugoku and the Shikoku district, and the actual condition of management employment of blood irradiation equipment was investigated. Consequently, there was little institution in which the medical-examination radiological technologist is participating directly, and it was made clear dependent on the maker of an equipment management. (author)

  7. High burnup fuel onset conditions in dry storage. Prediction of EOL rod internal pressure

    Energy Technology Data Exchange (ETDEWEB)

    Feria, F.; Herranz, L.E.

    2015-07-01

    During dry storage, cladding resistance to failure can be affected by several degrading mechanisms like creep or hydrides radial reorientation. The driving force of these effects is the stress at which the cladding is submitted. The maximum stress in the cladding is determined by the end-of-reactor-life (EOL) rod internal pressure, PEOL, at the maximum temperature attained during dry storage. Thus, PEOL sets the initial conditions of storage for potential time-dependent changes in the cladding. Based on FRAPCON-3.5 calculations, the aim of this work is to analyse the PEOL of a PWR fuel rod irradiated to burnups greater than 60 GWd/tU, where limited information is available. In order to be conservative, demanding irradiation histories have been used with a peak linear power of 44 kW/m. FRAPCON-3.5 results show an increasing exponential trend of PEOL with burnup, from which a simple correlation has been derived. The comparison with experimental data found in the literature confirms the enveloping nature of the predicted curve. Based on that, a conservative prediction of cladding stress in dry storage has been obtained. The comparison with a critical stress threshold related to hydrides embrittlement seems to point out that this issue should not be a concern at burnups below 65 GWd/tU. (Author)

  8. Complications related to conventional self-expandable metal stent insertion and internal irradiation stent insertion in patients with advanced esophageal carcinoma: an analysis of 32 cases

    International Nuclear Information System (INIS)

    Xu Xingwen; Di Haiting; Zhu Jun; Shi Jian

    2011-01-01

    Objective: To compare the occurrence of complications between conventional self-expandable metal stent and internal irradiation stent insertion in treating patients with advanced esophageal carcinomas. Methods: A total of 32 patients with advanced esophageal carcinoma were randomly divided into irradiation stent group (n=15) and conventional stent group (n=17). Internal irradiation stent loaded with 125 I seeds was employed in patients of irradiation stent group, while conventional self-expandable metal stent was used in patients of conventional stent group. After the treatment, clinical follow-up was regularly conducted. Postoperative complications such as fever, severe chest pain, cough, esophageal perforation, pneumonia, hemorrhage, stent migration and restenosis, etc. were observed. Results: No significant difference in the occurrence of fever, severe chest pain, esophageal perforation and hemorrhage existed between the two groups (P>0.05). The difference in the occurrence of long-term complications such as stent migration or restenosis between the two groups was out statistically significant (P>0.05). However, the restenosis in irradiation stent group occurred obviously much later than that in conventional stent group. Conclusion: For the treatment of advanced esophageal carcinomas, the insertion of internal irradiation esophageal stent is safe. It dose not increase the incidence of postoperative complications. Therefore, it is worth popularizing this technique in clinical practice. (authors)

  9. Literature study of the radiobiological parameters of Caesium-137 required for evaluating internal irradiation doses as a function of age

    International Nuclear Information System (INIS)

    Garnier, A.

    1968-01-01

    This document reassembles information published in scientific literature on radiobiological parameters of Cs-137, necessary for the estimate of the internal irradiation dose of man according to his age (during growth). The data are completed by a commented review of the mathematical models, proposed in order to value the irradiation doses from ingested cesium and the biological parameters. (author) [fr

  10. Irradiation-Assisted Stress Corrosion Cracking of Austenitic Stainless Steels in BWR Environments

    International Nuclear Information System (INIS)

    Chen, Y.; Chopra, O. K.; Gruber, Eugene E.; Shack, William J.

    2010-01-01

    The internal components of light water reactors are exposed to high-energy neutron irradiation and high-temperature reactor coolant. The exposure to neutron irradiation increases the susceptibility of austenitic stainless steels (SSs) to stress corrosion cracking (SCC) because of the elevated corrosion potential of the reactor coolant and the introduction of new embrittlement mechanisms through radiation damage. Various nonsensitized SSs and nickel alloys have been found to be prone to intergranular cracking after extended neutron exposure. Such cracks have been seen in a number of internal components in boiling water reactors (BWRs). The elevated susceptibility to SCC in irradiated materials, commonly referred to as irradiation-assisted stress corrosion cracking (IASCC), is a complex phenomenon that involves simultaneous actions of irradiation, stress, and corrosion. In recent years, as nuclear power plants have aged and irradiation dose increased, IASCC has become an increasingly important issue. Post-irradiation crack growth rate and fracture toughness tests have been performed to provide data and technical support for the NRC to address various issues related to aging degradation of reactor-core internal structures and components. This report summarizes the results of the last group of tests on compact tension specimens from the Halden-II irradiation. The IASCC susceptibility of austenitic SSs and heat-affected-zone (HAZ) materials sectioned from submerged arc and shielded metal arc welds was evaluated by conducting crack growth rate and fracture toughness tests in a simulated BWR environment. The fracture and cracking behavior of HAZ materials, thermally sensitized SSs and grain-boundary engineered SSs was investigated at several doses (3 dpa). These latest results were combined with previous results from Halden-I and II irradiations to analyze the effects of neutron dose, water chemistry, alloy compositions, and welding and processing conditions on IASCC. The

  11. Internal hydriding in irradiated defected Zircaloy fuel rods: A review (LWBR Development Program)

    International Nuclear Information System (INIS)

    Clayton, J.C.

    1987-10-01

    Although not a problem in recent commercial power reactors, including the Shippingport Light Water Breeder Reactor, internal hydriding of Zircaloy cladding was a persistent cause of gross cladding failures during the 1960s. It occurred in the fuel rods of water-cooled nuclear power reactors that had a small cladding defect. This report summarizes the experimental findings, causes, mechanisms, and methods of minimizing internal hydriding in defected Zircaloy-clad fuel rods. Irradiation test data on the different types of defected fuel rods, intentionally fabricated defected and in-pile operationally defected rods, are compared. Significant factors affecting internal hydriding in defected Zircaloy-clad fuel rods (defect hole size, internal and external sources of hydrogen, Zircaloy cladding surface properties, nickel alloy contamination of Zircaloy, the effect of heat flux and fluence) are discussed. Pertinent in-pile and out-of-pile test results from Bettis and other laboratories are used as a data base in constructing a qualitative model which explains hydrogen generation and distribution in Zircaloy cladding of defected water-cooled reactor fuel rods. Techniques for minimizing internal hydride failures in Zircaloy-clad fuel rods are evaluated

  12. In-Pile Tests for IASCC Growth Behavior of Irradiated 316L Stainless Steel under Simulated BWR Condition in JMTR

    Science.gov (United States)

    Chimi, Yasuhiro; Kasahara, Shigeki; Ise, Hideo; Kawaguchi, Yoshihiko; Nakano, Junichi; Nishiyama, Yutaka

    The Japan Atomic Energy Agency (JAEA) has an in-pile irradiation test plan to evaluate in-situ effects of neutron/γ-ray irradiation on stress corrosion crack (SCC) growth of irradiated stainless steels using the Japan Materials Testing Reactor (JMTR). SCC growth rate and its dependence on electrochemical corrosion potential (ECP) are different between in-pile test and post irradiation examination (PIE). These differences are not fully understood because of a lack of in-pile data. This paper presents a systematic review on SCC growth data of irradiated stainless steels, an in-pile test plan for crack growth of irradiated SUS316L stainless steel under simulated BWR conditions in the JMTR, and the development of the in-pile test techniques.

  13. Fuel Accident Condition Simulator (FACS) Furnace for Post-Irradiation Heating Tests of VHTR Fuel Compacts

    Energy Technology Data Exchange (ETDEWEB)

    Paul A Demkowicz; Paul Demkowicz; David V Laug

    2010-10-01

    Abstract –Fuel irradiation testing and post-irradiation examination are currently in progress as part of the Next Generation Nuclear Plant Fuels Development and Qualification Program. The PIE campaign will include extensive accident testing of irradiated very high temperature reactor fuel compacts to verify fission product retention characteristics at high temperatures. This work will be carried out at both the Idaho National Laboratory (INL) and the Oak Ridge National Laboratory, beginning with accident tests on irradiated fuel from the AGR-1 experiment in 2010. A new furnace system has been designed, built, and tested at INL to perform high temperature accident tests. The Fuel Accident Condition Simulator furnace system is designed to heat fuel specimens at temperatures up to 2000°C in helium while monitoring the release of volatile fission metals (e.g. Cs, Ag, Sr, Eu, and I) and fission gases (Kr, Xe). Fission gases released from the fuel to the sweep gas are monitored in real time using dual cryogenic traps fitted with high purity germanium detectors. Condensable fission products are collected on a plate attached to a water-cooled cold finger that can be exchanged periodically without interrupting the test. Analysis of fission products on the condensation plates involves dry gamma counting followed by chemical analysis of selected isotopes. This paper will describe design and operational details of the Fuel Accident Condition Simulator (FACS) furnace system, as well as preliminary system calibration results.

  14. Photoinduced optical anisotropy in azobenzene methacrylate block copolymers: Influence of molecular weight and irradiation conditions

    DEFF Research Database (Denmark)

    Gimeno, Sofia; Forcen, Patricia; Oriol, Luis

    2009-01-01

    The photoinduced anisotropy in a series of azomethacrylate block copolymers with different Molecular weights and azo contents has been investigated under several irradiation conditions. Depending on molecular weight and composition, different microstructures (disordered, lamellar, spherical) appe...

  15. Total body irradiation in conditioning patients for bone marrow transplantation. Irradiation technique and preliminary results at the West German Tumour Centre, Universitaetsklinikum Essen

    International Nuclear Information System (INIS)

    Schmitt, G.; Schaefer, U.W.; Nowrousian, M.R.; Oehl, S.

    1979-01-01

    Preliminary results of bone marrow transplantation of 8 patients are presented with particular reference to the irradiation technique. 5 patients died 0.5 to 8 months after transplantation. 3 patients are alive and in good condition 2 to 15 months after transplantation

  16. Response of unirradiated and irradiated PWR fuel rods tested under power-cooling-mismatch conditions

    International Nuclear Information System (INIS)

    MacDonald, P.E.; Quapp, W.J.; Martinson, Z.R.; McCardell, R.K.; Mehner, A.S.

    1978-01-01

    This report summarizes the results from the single-rod power-cooling-mismatch (PCM) and irradiation effects (IE) tests conducted to date in the Power Burst Facility (PBF) at the U.S. DOE Idaho National Engineering Laboratory. This work was performed for the U.S. NRC under contact to the Department of Energy. These tests are part of the NRC Fuel Behavior Program, which is designed to provide data for the development and verification of analytical fuel behavior models that are used to predict fuel response to abnormal or postulated accident conditions in commercial LWRs. The mechanical, chemical and thermal response of both previously unirradiated and previously irradiated LWR-type fuel rods tested under power-cooling-mismatch condition is discussed. A brief description of the test designs is presented. The results of the PCM thermal-hydraulic studies are summarized. Primary emphasis is placed on the behavior of the fuel and cladding during and after stable film boiling. (orig.) [de

  17. Some legal considerations in the adoption and application of food irradiation technology

    Energy Technology Data Exchange (ETDEWEB)

    Reyes, L S

    1986-12-31

    only for its food processing functions but for its working personnel as well; giving the regulatory government agency the authority and responsibility to set standards for the packages of irradiated food and to ensure there will be no recontamination of the food; providing for a seal or symbol, patterned after an international symbol of irradiated food adopted by international agencies like FAO/WHO/IAEA, to be placed in the label to identify to consumers that the food being sold is irradiated; providing whenever necessary the conditions under which irradiated food should be stored to maintain its wholesomeness; providing for the truthful advertising of irradiated food; and providing for the adoption and strict compliance with international standards adopted for irradiated food processing by all countries employing the process to ensure the safety of the consuming public. The paper will also discuss the additional benefits which the irradiation process may be able to provide vis-a-vis other methods of food preservation in developing countries

  18. Some legal considerations in the adoption and application of food irradiation technology

    International Nuclear Information System (INIS)

    Reyes, L. S.

    1985-01-01

    only for its food processing functions but for its working personnel as well; giving the regulatory government agency the authority and responsibility to set standards for the packages of irradiated food and to ensure there will be no recontamination of the food; providing for a seal or symbol, patterned after an international symbol of irradiated food adopted by international agencies like FAO/WHO/IAEA, to be placed in the label to identify to consumers that the food being sold is irradiated; providing whenever necessary the conditions under which irradiated food should be stored to maintain its wholesomeness; providing for the truthful advertising of irradiated food; and providing for the adoption and strict compliance with international standards adopted for irradiated food processing by all countries employing the process to ensure the safety of the consuming public. The paper will also discuss the additional benefits which the irradiation process may be able to provide vis-a-vis other methods of food preservation in developing countries

  19. Simulation of gamma-ray irradiation of lettuce leaves in a 137Cs irradiator using MCNP

    International Nuclear Information System (INIS)

    Kim, Jongsoon; Moreira, Rosana G.; Braby, Leslie A.

    2010-01-01

    Ionizing radiation effectively reduces the number of common microbial pathogens in fresh produce. However, the efficacy of the process for pathogens internalized into produce tissue is unknown. The objective of this study was to understand gamma irradiation of lettuce leaf structure exposed in a 137 Cs irradiator using MCNP. The simulated 137 Cs irradiator is a self-shielded device, and its geometry and sources are described in the MCNP input file. When the irradiation chamber is filled with water, lower doses are found at the center of the irradiation volume and the dose uniformity ratio (maximum dose/minimum dose) is 1.76. For randomly oriented rectangular lettuce leaf segments in the irradiation chamber, the dose uniformity ratio is 1.25. It shows that dose uniformity in the Cs irradiator is strongly dependent of the density of the sample. To understand dose distribution inside the leaf, we divided a lettuce leaf into a low density (flat) region (0.72 g/cm 3 ) and high density (rib) region (0.86 g/cm 3 ). Calculated doses to the rib are 61% higher than doses to the flat region of the leaf. This indicates that internalized microorganisms can be inactivated more easily than organisms on the surface. This study shows that irradiation can effectively reduce viable microorganism internalized in lettuce. (author)

  20. A study on the boundary condition for analysis of bio-heat equation according to light irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Dong Guk; Bae, Sung Woo; Im, Ik Tae [Chunbuk Natinal University, Junju (Korea, Republic of)

    2015-11-15

    In this study, the temperature change in an imitational biological tissue, when its surface is irradiated with bio-light, was measured by experiments. Using the experimental data, an equation for temperature as a function of time was developed in order to use it as a boundary condition in numerical studies for the model. The temperature profile was measured along the depth for several wavelengths and distances of the light source from the tissue. It was found that the temperature of the tissue increased with increasing wavelength and irradiation time; however, the difference in the temperatures with red light and near infrared light was not large. The numerical analysis results obtained by using the developed equation as boundary condition show good agreement with the measured temperatures.

  1. Results from the CDE phase activity on neutron dosimetry for the international fusion materials irradiation facility test cell

    CERN Document Server

    Esposito, B; Maruccia, G; Petrizzi, L; Bignon, G; Blandin, C; Chauffriat, S; Lebrun, A; Recroix, H; Trapp, J P; Kaschuck, Y

    2000-01-01

    The international fusion materials irradiation facility (IFMIF) project deals with the study of an accelerator-based, deuterium-lithium source, producing high energy neutrons at sufficient intensity and irradiation volume to test samples of candidate materials for fusion energy reactors. IFMIF would also provide calibration and validation of data from fission reactor and other accelerator based irradiation tests. This paper describes the activity on neutron/gamma dosimetry (necessary for the characterization of the specimens' irradiation) performed in the frame of the IFMIF conceptual design evaluation (CDE) neutronics tasks. During the previous phase (conceptual design activity (CDA)) the multifoil activation method was proposed for the measurement of the neutron fluence and spectrum and a set of suitable foils was defined. The cross section variances and covariances of this set of foils have now been used for tests on the sensitivity of the IFMIF neutron spectrum determination to cross section uncertainties...

  2. HRB-22 capsule irradiation test for HTGR fuel. JAERI/USDOE collaborative irradiation test

    Energy Technology Data Exchange (ETDEWEB)

    Minato, Kazuo; Sawa, Kazuhiro; Fukuda, Kousaku [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; and others

    1998-03-01

    As a JAERI/USDOE collaborative irradiation test for high-temperature gas-cooled reactor fuel, JAERI fuel compacts were irradiated in the HRB-22 irradiation capsule in the High Flux Isotope Reactor at the Oak Ridge National Laboratory (ORNL). Postirradiation examinations also were performed at ORNL. This report describes 1) the preirradiation characterization of the irradiation samples of annular-shaped fuel compacts containing the Triso-coated fuel particles, 2) the irradiation conditions and fission gas releases during the irradiation to measure the performance of the coated particle fuel, 3) the postirradiation examinations of the disassembled capsule involving visual inspection, metrology, ceramography and gamma-ray spectrometry of the samples, and 4) the accident condition tests on the irradiated fuels at 1600 to 1800degC to obtain information about fuel performance and fission product release behavior under accident conditions. (author)

  3. Practical models to estimate horizontal irradiance in clear sky conditions: Preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Salazar, German A.; Hernandez, Alejandro L.; Saravia, Luis R. [Department of Physics, School of Exact Sciences, National University of Salta, Bolivia Avenue 5150, 4400 Salta Capital (Argentina); INENCO (Institute of Non Conventional Energy Research), Bolivia Avenue 5150, 4400 Salta Capital (Argentina)

    2010-11-15

    The Argentinean Northwest (ANW) is a high altitude region located alongside Los Andes Mountains. The ANW is also one of the most insolated regions in the world due to its altitude and particular climate. However, the characterization of the solar resource in the region is incomplete as there are no stations to measure solar radiation continuously and methodically. With irradiance data recently having been measured at three sites in the Salta Province, a study was carried out that resulted in a practical model to quickly and efficiently estimate the horizontal irradiance in high altitude sites in clear sky conditions. This model uses the altitude above sea level (A) as a variable and generates a representative clearness index as a result (k{sub t-R}) that is calculated for each site studied. This index k{sub t-R} is then used with the relative optical air mass and the extraterrestrial irradiance to estimate the instantaneous clearness index (k{sub t}). Subsequently, the index k{sub t-R} is corrected by introducing the atmospheric pressure in the definition of relative optical air mass proposed by Kasten. The results are satisfactory as errors in the irradiance estimations with respect to measured values do not exceed 5% for pressure corrected air masses AM{sub c} < 2. This model will be used in a feasibility study to locate sites for the installation of solar thermal power plants in the ANW. A prototype of a CLFR solar power plant is being built in the INENCO Campus, at the National University of Salta. (author)

  4. An AES Study of the Room Temperature Surface Conditioning of Technological Metal Surfaces by Electron Irradiation

    OpenAIRE

    Scheuerlein, C; Hilleret, Noël; Taborelli, M; Brown, A; Baker, M A

    2002-01-01

    The modifications to technological copper and niobium surfaces induced by 2.5 keV electron irradiation have been investigated in the context of the conditioning process occurring in particle accelerator ultra high vacuum systems. Changes in the elemental surface composition have been found using Scanning Auger Microscopy (SAM) by monitoring the carbon, oxygen and metal Auger peak intensities as a function of electron irradiation in the dose range 10-6 to 10-2 C mm-2. The surface analysis resu...

  5. Food irradiation makes progress

    International Nuclear Information System (INIS)

    Kooij, J. van

    1984-01-01

    In the past fifteen years, food irradiation processing policies and programmes have been developed both by a number of individual countries, and through projects supported by FAO, IAEA and WHO. These aim at achieving general acceptance and practical implementation of food irradiation through rigorous investigations of its wholesomeness, technological and economic feasibility, and efforts to achieve the unimpeded movement of irradiated foods in international trade. Food irradiation processing has many uses

  6. Ten-Year Survival Results of a Randomized Trial of Irradiation of Internal Mammary Nodes After Mastectomy

    International Nuclear Information System (INIS)

    Hennequin, Christophe; Bossard, Nadine; Servagi-Vernat, Stéphanie; Maingon, Philippe; Dubois, Jean-Bernard; Datchary, Jean; Carrie, Christian; Roullet, Bernard; Suchaud, Jean-Philippe; Teissier, Eric; Lucardi, Audrey; Gerard, Jean-Pierre; Belot, Aurélien

    2013-01-01

    Purpose: To evaluate the efficacy of irradiation of internal mammary nodes (IMN) on 10-year overall survival in breast cancer patients after mastectomy. Methods and Patients: This multicenter phase 3 study enrolled patients with positive axillary nodes (pN+) or central/medial tumors with or without pN+. Other inclusion criteria were age <75 and a Karnofsky index ≥70. All patients received postoperative irradiation of the chest wall and supraclavicular nodes and were randomly assigned to receive IMN irradiation or not. Randomization was stratified by tumor location (medial/central or lateral), axillary lymph node status, and adjuvant therapy (chemotherapy vs no chemotherapy). The prescribed dose of irradiation to the target volumes was 50 Gy or equivalent. The first 5 intercostal spaces were included in the IMN target volume, and two-thirds of the dose (31.5 Gy) was given by electrons. The primary outcome was overall survival at 10 years. Disease-free survival and toxicity were secondary outcomes. Results: T total of 1334 patients were analyzed after a median follow-up of 11.3 years among the survivors. No benefit of IMN irradiation on the overall survival could be demonstrated: the 10-year overall survival was 59.3% in the IMN-nonirradiated group versus 62.6% in the IMN-irradiated group (P=.8). According to stratification factors, we defined 6 subgroups (medial/central or lateral tumor, pN0 [only for medial/central] or pN+, and chemotherapy or not). In all these subgroups, IMN irradiation did not significantly improve overall survival. Conclusions: In patients treated with 2-dimensional techniques, we failed to demonstrate a survival benefit for IMN irradiation. This study cannot rule out a moderate benefit, especially with more modern, conformal techniques applied to a higher risk population

  7. AGC-2 Irradiation Report

    Energy Technology Data Exchange (ETDEWEB)

    Rohrbaugh, David Thomas [Idaho National Lab. (INL), Idaho Falls, ID (United States); Windes, William [Idaho National Lab. (INL), Idaho Falls, ID (United States); Swank, W. David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-06-01

    The Next Generation Nuclear Plant (NGNP) will be a helium-cooled, very high temperature reactor (VHTR) with a large graphite core. In past applications, graphite has been used effectively as a structural and moderator material in both research and commercial high temperature gas cooled reactor (HTGR) designs.[ , ] Nuclear graphite H 451, used previously in the United States for nuclear reactor graphite components, is no longer available. New nuclear graphites have been developed and are considered suitable candidates for the new NGNP reactor design. To support the design and licensing of NGNP core components within a commercial reactor, a complete properties database must be developed for these current grades of graphite. Quantitative data on in service material performance are required for the physical, mechanical, and thermal properties of each graphite grade with a specific emphasis on data related to the life limiting effects of irradiation creep on key physical properties of the NGNP candidate graphites. Based on experience with previous graphite core components, the phenomenon of irradiation induced creep within the graphite has been shown to be critical to the total useful lifetime of graphite components. Irradiation induced creep occurs under the simultaneous application of high temperatures, neutron irradiation, and applied stresses within the graphite components. Significant internal stresses within the graphite components can result from a second phenomenon—irradiation induced dimensional change. In this case, the graphite physically changes i.e., first shrinking and then expanding with increasing neutron dose. This disparity in material volume change can induce significant internal stresses within graphite components. Irradiation induced creep relaxes these large internal stresses, thus reducing the risk of crack formation and component failure. Obviously, higher irradiation creep levels tend to relieve more internal stress, thus allowing the

  8. Non-destructive tests of capsules for JMTR irradiation examination

    International Nuclear Information System (INIS)

    Tanaka, Hidetaka; Nagao, Yoshiharu; Sato, Masashi; Osawa, Kenji

    2007-03-01

    Irradiation examination are increasing in advanced irradiation research for accurate prediction control and evaluation of irradiation parameter such as neutron fluence, etc. by using JMTR. Irradiation capsule internals are therefore structurally complicated recently. This report described the procedure of non destructive tests such as radiographic test, penetrant test, ultrasonic test, etc. for inspection of irradiation capsules in JMTR, and the result of Test-case of confirmation procedure for internal parts of irradiation capsules. (author)

  9. The analysis of the annular fuel performance in steady state condition by using AFPAC code

    International Nuclear Information System (INIS)

    He Xiaojun; Ji Songtao; Zhang Yingchao

    2012-01-01

    The fuel performance code AFPAC v1.0 is used to analyze annular fuel's behavior under steady state conditions, including neutronics, thermal hydraulic, rod deformation, fission gas release and rod internal pressure. The calculation results show that: 1) Annular fuel has a good steady irradiation performance at 150% power level as current LWRs' with burnup up to 50 GWd/t, and all parameters, such as temperature, rod internal pressure and rod deformation, are meet the rod design criteria for current fuel of PWRs: 2) Compared to the solid fuel under the same irradiation condition. annular fuel has lower temperature, smaller deformation, lower fission gas release and lower pressure at EOL. From the point of view of steady irradiation performance, the safety of reactors can significantly improved by u sing the annular fuel. (authors)

  10. IFMIF (International Fusion Materials Irradiation Facility) key element technology phase interim report

    International Nuclear Information System (INIS)

    Nakamura, Hiroo; Ida, Mizuho; Sugimoto, Masayoshi; Takeuchi, Hiroshi; Yutani, Toshiaki

    2002-03-01

    Activities of International Fusion Materials Irradiation Facility (IFMIF) have been performed under an IEA collaboration since 1995. IFMIF is an accelerator-based deuteron (D + )-lithium (Li) neutron source designed to produce an intense neutron field (2 MW/m 2 , 20 dpa/year for Fe) in a volume of 500 cm 3 for testing candidate fusion materials. In 2000, a 3 year Key Element technology Phase (KEP) of IFMIF was started to reduce the key technology risk factors. This interim report summarizes the KEP activities until mid 2001 in the major project work-breakdown areas of accelerator, target, test facilities and design integration. (author)

  11. Impacts of an Innovative Residential Construction Method on Internal Conditions

    Directory of Open Access Journals (Sweden)

    Roger Birchmore

    2015-02-01

    Full Text Available New Zealand houses are known for producing sub-optimal internal thermal conditions and unacceptably high internal moisture levels. These contribute to poor levels of health, mould and can coincide with the decay of structural timber frames. A proposed solution is to provide an alternative structure utilising plywood, a vapour check on the internal face of the timber frame and an additional air gap, followed by the internal lining. The internal vapour check is designed to prevent moisture vapour diffusion from inside into the frame and to permit moisture diffusion from outside through the structure to the internal environment. Two full scale houses had temperatures, dew points and humidity levels monitored in passive, unoccupied conditions. The test case house incorporated the innovative construction solution. The control house was of identical design and location, using standard construction practice. The calculated internal moisture content profile appeared to be unrelated to the external moisture content as expected, instead following the profile of the changing internal temperature. Whilst the innovative construction appeared to prevent moisture diffusion into the structure in winter and permit it inside in summer, this resulted in a generally higher internal relative humidity than the control house.

  12. Microstructure and damage behavior of W-Cr alloy under He irradiation

    Science.gov (United States)

    Huang, Ke; Luo, Lai-Ma; Zan, Xiang; Xu, Qiu; Liu, Dong-Guang; Zhu, Xiao-Yong; Cheng, Ji-Gui; Wu, Yu-Cheng

    2018-04-01

    In this study, a large-power inductively coupled plasma source was designed to perform the continuous helium ion irradiations of W-Cr binary alloy (W-20 wt%Cr) under relevant conditions of the International Thermonuclear Experimental Reactor. Surface damages and microstructures of irradiated W-20Cr were observed by using scanning electron microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy. The addition of Cr dramatically enhanced the micro-hardness of the obtained bulk materials, and the interface between the W matrix and the second phase Cr-O is a semi-coherent interface. After irradiation, the doping of Cr element effectively reduces the damage of the W matrix during the irradiation process. The semi-coherent interface between the second phase and the W matrix improves the anti-irradiation performance of the W-20Cr alloy.

  13. Control of the neutronic and thermohydraulic conditions of power ramps in an irradiation loop for PWR fuel rod; Controle des conditions neutroniques et thermohydrauliques des rampes de puissance dans une boucle d`irradiation de combustibles de reacteur a eau pressurisee

    Energy Technology Data Exchange (ETDEWEB)

    Moulin, D J.F.

    1993-09-10

    In order to study the power transients effects on PWR fuel rod clad, ramp tests in a pressurized water loop, are carried out at OSIRIS reactor. The present thesis deals with the on-line control of the device, during power ramp and conditioning irradiation. Based on a convolution-type resolution of the kinetics equations, a dynamic compensation of the Silver self-powered neutron detector was developed. With this method, the uncertainty of the ramp end-point is lower than 1%, thus it is very suited for monitoring both transient, as well as steady state conditions. Furthermore, a thermohydraulic model of the irradiation device is described: heat transfer equations, including gamma heating in materials, are solved to obtain temperatures and thermal fluxes of steady states. Results from the model and temperature measurements of the coolant are used together for fuel power determination, in real time. The clad external temperature profile is also calculated and displayed, to improve the irradiation monitoring. (author), 51 refs., 12 annexes, 66 figs.

  14. Experimental approach and micro-mechanical modeling of the mechanical behavior of irradiated zirconium alloys; Approche experimentale et modelisation micromecanique du comportement des alliages de zirconium irradies

    Energy Technology Data Exchange (ETDEWEB)

    Onimus, F

    2003-12-01

    Zirconium alloys cladding tubes containing nuclear fuel of the Pressurized Water Reactors constitute the first safety barrier against the dissemination of radioactive elements. Thus, it is essential to predict the mechanical behavior of the material in-reactor conditions. This study aims, on the one hand, to identify and characterize the mechanisms of the plastic deformation of irradiated zirconium alloys and, on the other hand, to propose a micro-mechanical modeling based on these mechanisms. The experimental analysis shows that, for the irradiated material, the plastic deformation occurs by dislocation channeling. For transverse tensile test and internal pressure test this channeling occurs in the basal planes. However, for axial tensile test, the study revealed that the plastic deformation also occurs by channeling but in the prismatic and pyramidal planes. In addition, the study of the macroscopic mechanical behavior, compared to the deformation mechanisms observed by TEM, suggested that the internal stress is higher in the case of irradiated material than in the case of non-irradiated material, because of the very heterogeneous character of the plastic deformation. This analysis led to a coherent interpretation of the mechanical behavior of irradiated materials, in terms of deformation mechanisms. The mechanical behavior of irradiated materials was finally modeled by applying homogenization methods for heterogeneous materials. This model is able to reproduce adequately the mechanical behavior of the irradiated material, in agreement with the TEM observations. (author)

  15. Internal stress distribution for generating closure domains in laser-irradiated Fe–3%Si(110) steels

    International Nuclear Information System (INIS)

    Iwata, Keiji; Imafuku, Muneyuki; Orihara, Hideto; Sakai, Yusuke; Ohya, Shin-Ichi; Suzuki, Tamaki; Shobu, Takahisa; Akita, Koichi; Ishiyama, Kazushi

    2015-01-01

    Internal stress distribution for generating closure domains occurring in laser-irradiated Fe–3%Si(110) steels was investigated using high-energy X-ray analysis and domain theory based on the variational principle. The measured triaxial stresses inside the specimen were compressive and the stress in the rolling direction became more dominant than stresses in the other directions. The calculations based on the variational principle of magnetic energy for closure domains showed that the measured triaxial stresses made the closure domains more stable than the basic domain without closure domains. The experimental and calculation results reveal that the laser-introduced internal stresses result in the occurrence of the closure domains

  16. Improvement of colour strength and colourfastness properties of gamma irradiated cotton using reactive black-5

    International Nuclear Information System (INIS)

    Ahmad Bhatti, Ijaz; Adeel, Shahid; Nadeem, Raziya; Asghar, Toheed

    2012-01-01

    The dyeing behaviour of gamma irradiated cotton fabric using Reactive Black-5 dye powder has been investigated. The mercerized, bleached and plain weaved cotton fabric was irradiated to different absorbed doses of 100, 200, 300, 400, 500 and 600 Gy using Co-60 gamma irradiator. Dyeing was performed using irradiated and un-irradiated cotton with dye solutions. The dyeing parameters such as temperature of dyeing, time of dyeing and pH of dyeing solutions were optimised. The colour strength values of dyed fabrics were evaluated by comparing irradiated and un-irradiated cotton in CIE Lab system using Spectra flash SF650. Methods suggested by International Standard Organisation (ISO) were employed to study the effect of gamma irradiation on the colourfastness properties of dyed fabric. It is found that gamma irradiated cotton dyed with Reactive Black-5 has not only improved the colour strength but also enhanced the rating of fastness properties. - Highlights: ► Optimum absorbed dose for cotton is 500 Gy using un-irradiated Reactive Black-5. ► Optimum dyeing conditions: 60 °C, 30 min and dyeing pH is10. ► At optimum conditions colour strength and fastness properties are enhanced. ► Gamma irradiation can improve dyeing characters of other dyed fabrics.

  17. Fabrication of irradiation capsule for IASCC irradiation tests (2). Irradiation capsule for crack propagation test (Joint research)

    International Nuclear Information System (INIS)

    Ide, Hiroshi; Matsui, Yoshinori; Kawamata, Kazuo; Taguchi, Taketoshi; Kanazawa, Yoshiharu; Onuma, Yuichi; Watanabe, Hiroyuki; Inoue, Shuichi; Izumo, Hironobu; Ishida, Takuya; Saito, Takashi; Ishitsuka, Etsuo; Kawamura, Hiroshi; Kaji, Yoshiyuki; Ugachi, Hirokazu; Tsukada, Takashi

    2008-03-01

    It is known that irradiation Assisted Stress Corrosion Cracking (IASCC) occurs when austenitic stainless steel components used for light water reactor (LWR) are irradiated for a long period. In order to evaluate the high aging of the nuclear power plant, the study of IASCC becomes the important problem. The specimens irradiated in the reactor were evaluated by post irradiation examination in the past study. For the appropriate evaluation of IASCC, it is necessary to test it under the simulated LWR conditions; temperature, water chemistry and irradiation conditions. In order to perform in-pile SCC test, saturated temperature capsule (SATCAP) was developed. There are crack growth test, crack propagation test and so on for in-pile SCC test. In this report, SATCAP for crack propagation test is reported. (author)

  18. Fabrication of irradiation capsule for IASCC irradiation tests (1). Irradiation capsule for crack growth test (Joint research)

    International Nuclear Information System (INIS)

    Ide, Hiroshi; Matsui, Yoshinori; Kawamata, Kazuo; Taguchi, Taketoshi; Kanazawa, Yoshiharu; Onuma, Yuichi; Watanabe, Hiroyuki; Inoue, Shuichi; Izumo, Hironobu; Ishida, Takuya; Saito, Takashi; Ishitsuka, Etsuo; Kawamura, Hiroshi; Kaji, Yoshiyuki; Ugachi, Hirokazu; Tsukada, Takashi

    2008-03-01

    It is known that Irradiation Assisted Stress Corrosion Cracking (IASCC) occurs when austenitic stainless steel components used for light water reactor (LWR) are irradiated for a long period. In order to evaluate the high aging of the nuclear power plant, the study of IASCC becomes the important problem. The specimens irradiated in the reactor were evaluated by post irradiation examination in the past study. For the appropriate evaluation of IASCC, it is necessary to test it under the simulated LWR conditions; temperature, water chemistry and irradiation conditions. In order to perform in-pile SCC test, saturated temperature capsule (SATCAP) was developed. There are crack growth test, crack propagation test and so on for in-pile SCC test. In this report, SATCAP for crack growth test is reported. (author)

  19. A method to calibrate a solar pyranometer for measuring reference diffuse irradiance

    Energy Technology Data Exchange (ETDEWEB)

    Reda, I.; Stoffel, T.; Myers, D. [National Renewable Energy Laboratory, Golden, CO (United States)

    2003-02-01

    Accurate pyranometer calibrations, traceable to internationally recognized standards, are critical for solar irradiance measurements. One calibration method is the component summation, where the pyranometers are calibrated outdoors under clear sky conditions, and the reference global solar irradiance is calculated as the sum of two reference components, the diffuse and subtended beam solar irradiances. The beam component is measured with pyrheliometers traceable to the World Radiometric Reference, while there is no internationally recognized reference for the diffuse component. In the absence of such a reference, we present a method to consistently calibrate pyranometers for measuring the diffuse component with an estimated uncertainty of {+-} (3% of reading +1 W/m{sup 2}). The method is based on using a modified shade/unshade method, and pyranometers with less than 1 W/m{sup 2} thermal offset errors. We evaluated the consistency of our method by calibrating three pyranometers four times. Calibration results show that the responsivity change is within {+-} 0.52% for the three pyranometers. We also evaluated the effect of calibrating pyranometers unshaded, then using them shaded to measure diffuse irradiance. We calibrated three unshaded pyranometers using the component summation method. Their outdoor measurements of clear sky diffuse irradiance, from sunrise to sundown, showed that the three calibrated pyranometers can be used to measure the diffuse irradiance to within {+-} 1.4 W/m{sup 2} variation from the reference irradiance. (author)

  20. The behaviour of transport from the fission products caesium and strontium in coated particles for high temperature reactors under irradiation conditions

    International Nuclear Information System (INIS)

    Zoller, P.

    1976-07-01

    At first survey is given about existing knowledge of the behaviour of caesium and strontium fission product transport in coated particles. In order to describe the complicated fission product transport mechanisms under irradiation conditions a suitable calculating model (SLIPPER) is taken over and modified to the special problems of an irradiation experiment. Fundamentally, the fission product transport is represented by the two contributions of diffusion and recoil, at which the diffusion is described by effective diffusion coefficients. In difference of that the possibility of a two-phase-diffusion is examined for the Cs diffusion in the fuel kernel. The model application on measuring results from irradiation experiments of KFA-Juelich and Mol-Belgien allowed the explanation from the characteristic of fission product transport in coated particles under irradiation conditions and produced effective diffusion coefficients for the fission products Cs and Sr. (orig.) [de

  1. REQUIREMENTS TO THE LIMITATION OF POPULATION EXPO-SURE FROM THE NATIRAL IONIZING IRRADIATION SOURCES IN INDUSTRIAL CONDITIONS

    Directory of Open Access Journals (Sweden)

    I. P. Stamat

    2010-01-01

    Full Text Available The paper presents conceptually new requirements to the limitation of population exposure from the natural ionizing irradiation sources in industrial conditions, introduced into Basic Sanitary Rules of Radiation Safety (OSPORB-99/2010. It is shown that, first of all, introduction of these requirements is aimed at the resolution of variety of previously existing serious contradictions in organization of radiation safety control and supervision for the impact of natural ionizing irradiation sources in industry.

  2. International Financial Institution Policies of Conditionality and Public Pedagogy

    Science.gov (United States)

    MacPhail, Scott; McGray, Robert

    2014-01-01

    Conditionalities are most broadly defined as the provisos that are to be met by a country when borrowing money from the International Financial Institutions (IFIs). Increasingly, they have proven to have far reaching consequences for countries entering into agreements with The World Bank, the International Monetary Fund, and the World Trade…

  3. Aging of magnesium stearate under high doses gamma irradiation and oxidative conditions

    Energy Technology Data Exchange (ETDEWEB)

    Lebeau, D.; Beuvier, L.; Cornaton, M. [CEA, DEN, DPC, SECR, LRMO, F-91191 Gif-sur-Yvette (France); Miserque, F. [CEA, DEN, DPC, SCCME, LECA, F-91191 Gif-sur-Yvette (France); Tabarant, M. [CEA, DEN, DPC, SEARS, LISL, F-91191 Gif-sur-Yvette (France); Esnouf, S. [CEA, DEN, DPC, SECR, LRMO, F-91191 Gif-sur-Yvette (France); Ferry, M., E-mail: muriel.ferry@cea.fr [CEA, DEN, DPC, SECR, LRMO, F-91191 Gif-sur-Yvette (France)

    2015-05-15

    Highlights: • Magnesium stearate was radio-oxidized at very high doses using gamma-rays. • H{sub 2} emission was estimated as a function of the integrated dose. • Modifications in the organic solid were followed as a function of the integrated dose. • A non-exhaustive degradation mechanism of magnesium stearate was proposed. - Abstract: In nuclear waste packages conditioning processes, magnesium stearate is widely used because of its high lubricating properties. For safety purposes, the radiolytic degradation of these organic materials has to be better understood to be able to predict their aging in repository conditions. This study reports the radiolytic degradation of magnesium stearate, using gamma-rays at room temperature and under air. Modifications were followed using different analytical tools (XPS, ATR-FTIR, ICP-AES, ATG and mass spectrometry). It has been observed that molecules mainly formed up to 1000 kGy of gamma irradiation dose under radio-oxidation are alkanes, hydroperoxides, double bonds in the aliphatic chain, carboxylates with aliphatic chain shorter than the one of stearate and ketones. At a dose of 4000 kGy, dicarboxylic acids are observed: the formation of these molecules needs a dose of at least 1000 kGy to be created under radio-oxidation. These observations allow us to propose a non-exhaustive degradation mechanism of magnesium stearate under gamma-irradiation at room temperature and under air.

  4. Fruit irradiation

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Food spoilage is a common problem when marketing agricultural products. Promising results have already been obtained on a number of food irradiating applications. A process is described in this paper where irradiation of sub-tropical fruits, especially mangoes and papayas, combined with conventional heat treatment results in effective insect and fungal control, delays ripening and greatly improves the quality of fruit at both export and internal markets

  5. Thermal analysis of LEU modified Cintichem target irradiated in TRIGA reactor

    International Nuclear Information System (INIS)

    Catana, A; Toma, C.

    2009-01-01

    Actions conceived during last years at international level for conversion of Molybdenum fabrication process from HEU to LEU targets utilization created opportunities for INR to get access to information and participating to international discussions under IAEA auspices. Concrete steps for developing fission Molybdenum technology were facilitated. Institute of Nuclear Research bringing together a number of conditions like suitable irradiation possibilities, direct communication between reactor and hot cell facility, handling capacity of high radioactive sources, and simultaneously the existence of an expanding internal market, decided to undertake the necessary steps in order to produce fission molybdenum. Over the course of last years of efforts in this direction we developed the steps for fission Molybdenum technology development based on modified Cintichem process in accordance with the Argonne National Laboratory proved methodology. Progress made by INR to heat transfer computations of annular target using is presented. An advanced thermal-hydraulic analysis was performed to estimate the heat removal capability for an enriched uranium (LEU) foil annular target irradiated in TRIGA reactor core. As a result, the present analysis provides an upper limit estimate of the LEU-foil and external target surface temperatures during irradiation in TRIGA 14 MW reactor. (authors)

  6. A study by internal friction of defects produced in iron and nickel irradiated at very low temperatures; Etude au moyen du frottement interne des defauts crees par irradiation a tres basse temperature dans le fer et le nickel

    Energy Technology Data Exchange (ETDEWEB)

    Keating-Hart, G de [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    This work represents a contribution to the study of point defects in metals. After a brief review of the theory of internal friction we will discuss some technical innovations aimed at increasing the flexibility of the apparatus at our disposal. These innovations have allowed us to extend our range of measurements down to 20 deg. K. We will then discuss our experimental results. Firstly, we describe preliminary experiments on electron irradiated iron and the evidence for a laminar structure. Secondly, we present and account of the first measurements on nickel after neutron irradiation at 27 deg. K. We will compare the results with those obtained by other methods in this laboratory. Essentially we have observed transitory peaks at low temperature due to close Frenkel pairs and we have noticed the absence of a peak which would correspond to the magnetic after effect band of stage I{sub E}. An attempt is made to explain the disappearance of the observed peaks upon the application of an internal saturating magnetic field. (author) [French] Ce memoire constitue une contribution a l'etude des defauts ponctuels dans les metaux. Apres un bref apercu theorique sur le frottement interne, nous presenterons quelques realisations techniques destinees a accroitre les possibilites des instruments qui nous ont ete confies. Ces dernieres nous ont permis d'etendre la gamme des mesures jusqu'a 20 deg. K. Nous parlerons ensuite de nos resultats experimentaux. En premier lieu, ceux obtenus au cours de premieres experiences, sur le fer irradie aux electrons mettent en evidence des structures de laminage. En second lieu, nous exposerons les premieres mesures realisees sur du nickel irradie aux neutrons; nous comparerons ces resultats avec ceux obtenus par d'autres moyens experimentaux dans le laboratoire. Nous avons observe essentiellement des pics fugitifs a basse temperature dus aux paires proches de Frenckel et nous avons constate l'absence d'un pic correspondant a la bande de tramage

  7. Irradiation Microstructure of Austenitic Steels and Cast Steels Irradiated in the BOR-60 Reactor at 320°C

    Science.gov (United States)

    Yang, Yong; Chen, Yiren; Huang, Yina; Allen, Todd; Rao, Appajosula

    Reactor internal components are subjected to neutron irradiation in light water reactors, and with the aging of nuclear power plants around the world, irradiation-induced material degradations are of concern for reactor internals. Irradiation-induced defects resulting from displacement damage are critical for understanding degradation in structural materials. In the present work, microstructural changes due to irradiation in austenitic stainless steels and cast steels were characterized using transmission electron microscopy. The specimens were irradiated in the BOR-60 reactor, a fast breeder reactor, up to 40 dpa at 320°C. The dose rate was approximately 9.4x10-7 dpa/s. Void swelling and irradiation defects were analyzed for these specimens. A high density of faulted loops dominated the irradiated-altered microstructures. Along with previous TEM results, a dose dependence of the defect structure was established at 320°C.

  8. Impact of fission gas on irradiated PWR fuel behaviour at extended burnup under RIA conditions

    International Nuclear Information System (INIS)

    Lemoine, F.; Schmitz, F.

    1996-01-01

    With the world-wide trend to increase the fuel burnup at discharge of the LWRs, the reliability of high burnup fuel must be proven, including its behaviour under energetic transient conditions, and in particular during RIAs. Specific aspects of irradiated fuel result from the increasing retention of gaseous and volatile fission products with burnup. The potential for swelling and transient expansion work under rapid heating conditions characterizes the high burnup fuel behaviour by comparison to fresh fuel. This effect is resulting from the steadily increasing amount of gaseous and volatile fission products retained inside the fuel structure. An attempt is presented to quantify the gas behaviour which is motivated by the results from the global tests both in CABRI and in NSRR. A coherent understanding of specific results, either transient release or post transient residual retention has been reached. The early failure of REP Na1 with consideration given to the satisfactory behaviour of the father rod of the test pin at the end of the irradiation (under load follow conditions) is to be explained both by the transient loading from gas driven fuel swelling and from the reduced clad resistance due to hydriding. (R.P.)

  9. Performance assessment of the (Th,U)O2 HTI-Biso coated particle under PNP/HHT irradiation conditions

    International Nuclear Information System (INIS)

    Kania, M.J.; Nickel, H.

    1980-11-01

    The HTI Biso Particle, Variant-I: consisting of a dense 400 μm-diameter (Th,U)O 2 -kernel with a Biso coating using a methane derived pyrocarbon layer (HTI), is a candidate fuel for the advanced PNP/HHT High Temperature Reactor systems. This report presents the results of a comprehensive performance assessment of Variant-I represented by six relevant particle batches irradiated in 12 accelerated irradiation experiments. Fuel performance was judged based upon PNP/HHT qualification requirements with regard to in-reactor operating conditions and end-of-life (EOL) coated particle failure fraction. Fuel operating conditions in each irradiation experiment were obtained from two sources: 1) a thorough review of all available irradiation data on each experiment; and 2) a two-dimensional (R,theta) thermal modeling computer code, R2KTMP, was developed to calculate fuel operating temperature distributions within spherical elements. End-of-life particle failure fractions were determined from: gaseous fission product release, based on in-reactor R/B measurements and postirradiation annealing and room temperature investigations; solid fission product release, from single particle 137 Cs release into fuel element matrix and hot-gaseous chlorine leaching; and visual and ceramographic examinations. Failure fractions determined by solid fission product release yielded values 2-35 times higher than those determined by gaseous fission product release. (orig.) [de

  10. Legislative and administrative control of processing of and trade in irradiated food

    International Nuclear Information System (INIS)

    Loaharanu, P.

    1992-01-01

    This presentation will focus on regulatory and administrative procedures recently developed to strengthen the control aspect of commercial use of food irradiation. Most of these developed by the International Consultative Group on Food Irradiation (ICGFI) established under the aegis of FAO, IAEA and WHO since 1984. ICGFI has produced a number of guidelines/codes of practice to assist national authorities in regulating the commercial use of food irradiation. The following regulatory control provisions will be highlighted: 1. Codes of good irradiation practice for specific application of food irradiation. 2. International inventory of authorised food irradiation facilities. 3. International training programmes for operators/plant managers of irradiation facilities and food inspectors. 4. International Dose Assurance Service (IDAS). 5. Labelling. 6. Certificate of irradiated food. (orig.) [de

  11. Detection methods for irradiated foods

    International Nuclear Information System (INIS)

    Dyakova, A.; Tsvetkova, E.; Nikolova, R.

    2005-01-01

    In connection with the ongoing world application of irradiation as a technology in Food industry for increasing food safety, it became a need for methods of identification of irradiation. It was required to control international trade of irradiated foods, because of the certain that legally imposed food laws are not violated; supervise correct labeling; avoid multiple irradiation. Physical, chemical and biological methods for detection of irradiated foods as well principle that are based, are introducing in this summary

  12. Elimination of Salmonella in froglegs by irradiation. Coordinated programme on factors influencing the utilization of food irradiation processes

    International Nuclear Information System (INIS)

    Tambunan, P.R.

    1984-11-01

    Living frogs and their internal organs are highly contaminated with several serotypes of Salmonella. The high level of contamination was carried along with frog legs upon arrival at processing plants. Washing in chlorinated water and freezing reduced but did not eliminate Salmonella from the product. Irradiating frog legs artificially contaminated with Salmonella up to 10 6 /g before freezing showed that a dose of 3 kGy and above resulted in no detection of the bacteria. If irradiation was carried out after freezing, a dose of 4 kGy and above has to be used. The latter procedure appears to be more feasible commercially than the former one. It was concluded that a combination of chlorination, freezing and irradiation with a dose ranging from 3 to 6 kGy should provide sufficient conditions for elimination of Salmonella in the product. The treatment also results in lowering the total viable count to less than 500,000 cells/g to conform with the standard requirements for export

  13. Foodstuff irradiation

    International Nuclear Information System (INIS)

    1982-01-01

    Report written on behalf of the Danish Food Institute summarizes national and international rules and developments within food irradiation technology, chemical changes in irradiated foodstuffs, microbiological and health-related aspects of irradiation and finally technological prospects of this conservation form. Food irradiatin has not been hitherto applied in Denmark. Radiation sources and secondary radiation doses in processed food are characterized. Chemical changes due to irradiation are compared to those due to p.ex. food heating. Toxicological and microbiological tests and their results give no unequivocal answer to the problem whether a foodstuff has been irradiated. The most likely application fields in Denmark are for low radiation dosis inhibition of germination, riping delay and insecticide. Medium dosis (1-10 kGy) can reduce bacteria number while high dosis (10-50 kGy) will enable total elimination of microorganisms and viruses. Food irradiation can be acceptable as technological possibility with reservation, that further studies follow. (EG)

  14. IFMIF (International Fusion Materials Irradiation Facility) key element technology phase interim report

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Hiroo; Ida, Mizuho; Sugimoto, Masayoshi; Takeuchi, Hiroshi; Yutani, Toshiaki (eds.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2002-03-01

    Activities of International Fusion Materials Irradiation Facility (IFMIF) have been performed under an IEA collaboration since 1995. IFMIF is an accelerator-based deuteron (D{sup +})-lithium (Li) neutron source designed to produce an intense neutron field (2 MW/m{sup 2}, 20 dpa/year for Fe) in a volume of 500 cm{sup 3} for testing candidate fusion materials. In 2000, a 3 year Key Element technology Phase (KEP) of IFMIF was started to reduce the key technology risk factors. This interim report summarizes the KEP activities until mid 2001 in the major project work-breakdown areas of accelerator, target, test facilities and design integration. (author)

  15. Acceptance, control of and trade in irradiated food

    International Nuclear Information System (INIS)

    1989-01-01

    Proceedings of an International Conference on the Acceptance, Control of and Trade in Irradiated Food jointly organized by the Food and Agriculture Organization of the United Nations, the World Health Organization, the International Atomic Energy Agency and the International Trade Centre-UNCTAD/GATT and held in Geneva, 12-16 December 1988. The Conference was prompted by the lack of acceptance by some governments, which do not see a need for the application of food irradiation technology in their own countries, and as a consequence may hamper its use in other countries where its application could significantly improve consumer health and nutrition, as well as national economic and trading potential. This publication contains discussions on the key issues of the wholesomeness of irradiated food, the contribution of this technology to public health, food security and international trade, the control of the process to ensure its correct application for consumer protection, and the acceptance of irradiated food by industry and consumers. The proceedings include the International Document on Food Irradiation, highlighting the major issues related to the acceptance of irradiated food by consumers, governmental and intergovernmental activities, the control of the process, and trade. A number of Member States formally expressed their views on this International Document, expressing either endorsement or reservation, and their statements are included in these proceedings. Refs, fig and tabs

  16. Internal irradiation by radon daughters in Bulgarian uranium mines over the period 1956-1990

    International Nuclear Information System (INIS)

    Dimitrov, M.; Presiyanov, D.

    1993-01-01

    The results of over 30-years' radiation monitoring in Bulgarian uranium mines are summed up in retrospect. The overall organization and the parameters monitored during the different periods are discussed. A radiological characteristic of the working environment is presented which includes radon and its decay products. The internal irradiation levels during different time periods and in different mines have been estimated. The health costs of uranium mining in Bulgaria are discussed and conclusions and recommendations for radiological control are made. (author)

  17. Food Irradiation Regulations And Code Of Practice

    International Nuclear Information System (INIS)

    Jimba, B.W. Centre For Energy Research And Training, Ahmadu Bello University, Zaria,

    1996-01-01

    Official attitude towards irradiated food is determined by factors such as: level of scientific knowledge, consumer habits, food shortages, agricultural production and technological know-how. To date, 39 countries have accepted the process for one or more food items while 27 nations carry out the process on a commercial basis. Regulations and codes of practice is essential for consumer confidence while uniformity of regulations, at the international level, will enhance international trade in irradiated food items. The internationally accepted Codex Standard on irradiated food and Codes of Practice for the operation of irradiation facilities, adopted in 1983, forms the basis for International regulations and a template for nations in the development of regulations. This paper discusses the basic legal requirements for licensing the process, procedures, facility and the operator and suggests a framework for a national regulation based on experiences of Hungary, Brazil and Israel

  18. Irradiation creep performance of graphite relevant for pebble bed HTRs

    International Nuclear Information System (INIS)

    Kleist, G.; O'Connor, M.F.

    1980-01-01

    Irradiation - induced creep in the core reflector component graphite of high temperature reactors is of primary importance to the core designer since it provides a mechanism for the relief of internal stresses arising from differential Wigner shrinkage and thermal expansion. The experimental determination of the extent of this creep for conditions relevant to the reactor is thus imperative

  19. Modeling of Microstructure Evolution in Austenitic Stainless Steels Irradiated Under Light Water Reactor Conditions

    International Nuclear Information System (INIS)

    Gan, J.; Stoller, R.E.; Was, G.S.

    1998-01-01

    A model for the development of microstructure during irradiation in fast reactors has been adapted for light water reactor (LWR) irradiation conditions (275 approximately 325 C, up to approximately10 dpa). The original model was based on the rate-theory, and included descriptions of the evolution of both dislocation loops and cavities. The model was modified by introducing in-cascade interstitial clustering, a term to account for the dose dependence of this clustering, and mobility of interstitial clusters. The purpose of this work was to understand microstructural development under LWR irradiation with a focus on loop nucleation and saturation of loop density. It was demonstrated that in-cascade interstitial clustering dominates loop nucleation in neutron irradiation in LWRS. Furthermore it was shown that the dose dependence of in-cascade interstitial clustering is needed to account for saturation behavior as commonly observed. Both quasi-steady-state (QSS) and non-steady-state (NSS) solutions to the rate equations were obtained. The difference between QSS and NSS treatments in the calculation of defect concentration is reduced at LWR temperature when in-cascade interstitial clustering dominates loop nucleation. The mobility of interstitial clusters was also investigated and its impact on loop density is to reduce the nucleation term. The ultimate goal of this study is to combine the evolution of microstructure and microchemistry together to account for the radiation damage in austenitic stainless steels

  20. Comparative study on disinfection potency of spore forming bacteria by electron-beam irradiation and gamma-ray irradiation

    International Nuclear Information System (INIS)

    Takizawa, Hironobu; Suzuki, Satoru; Suzuki, Tetsuya; Takama, Kozo; Hayashi, Toru; Yasumoto, Kyoden.

    1990-01-01

    Along with gamma-ray irradiation, electron-beam irradiation (EB) is a method to disinfect microorganisms which cause food decomposition and food-poisoning. The present study was undertaken to compare sterilization efficacy of EB and gamma-ray irradiation on bacterial spores and vegetative cells under various conditions. Spores of Bacillus pumilus, a marker strain for irradiation study, and Bacillus stearothermophilus known as a thermophilic bacteria were irradiated by electron-beam and gamma-ray separately at irradiation dose of 0 to 10 kGy on combination of wet/dry and aerobic/anaerobic conditions. Sterilization effect of irradiation on spores was evaluated by colony counting on agar plates. Results showed that both EB and gamma-ray irradiation gave sufficient sterilization effect on spores, and the sterilization effect increased exponentially with irradiation dose. The sterilization effect of gamma-ray irradiation was higher than that of EB in all cases. Higher disinfection effect was observed under aerobic condition. The present study suggests that oxygen supply in EB is more important than gamma-ray irradiation. No results suggesting that chlorine ion at 0.1 ppm (as available chlorine concentration) enhanced the sterilization efficacy of either EB or gamma-ray irradiation was obtained under any conditions examined. (author)

  1. Comparative study on disinfection potency of spore forming bacteria by electron-beam irradiation and gamma-ray irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Takizawa, Hironobu; Suzuki, Satoru; Suzuki, Tetsuya; Takama, Kozo [Hokkaido Univ., Hakodate (Japan). Faculty of Fisheries; Hayashi, Toru; Yasumoto, Kyoden

    1990-10-01

    Along with gamma-ray irradiation, electron-beam irradiation (EB) is a method to disinfect microorganisms which cause food decomposition and food-poisoning. The present study was undertaken to compare sterilization efficacy of EB and gamma-ray irradiation on bacterial spores and vegetative cells under various conditions. Spores of Bacillus pumilus, a marker strain for irradiation study, and Bacillus stearothermophilus known as a thermophilic bacteria were irradiated by electron-beam and gamma-ray separately at irradiation dose of 0 to 10 kGy on combination of wet/dry and aerobic/anaerobic conditions. Sterilization effect of irradiation on spores was evaluated by colony counting on agar plates. Results showed that both EB and gamma-ray irradiation gave sufficient sterilization effect on spores, and the sterilization effect increased exponentially with irradiation dose. The sterilization effect of gamma-ray irradiation was higher than that of EB in all cases. Higher disinfection effect was observed under aerobic condition. The present study suggests that oxygen supply in EB is more important than gamma-ray irradiation. No results suggesting that chlorine ion at 0.1 ppm (as available chlorine concentration) enhanced the sterilization efficacy of either EB or gamma-ray irradiation was obtained under any conditions examined. (author).

  2. Food preservation by irradiation

    International Nuclear Information System (INIS)

    Labots, H.; Huis in 't Veld, G.J.P.; Verrips, C.T.

    1985-01-01

    After a review of several methods for the preservation of food and the routes of food infections, the following chapters are devoted to the preservation by irradiation. Applications and legal aspects of food irradiation are described. Special reference is made to the international situation. (Auth.)

  3. Effect of low doses gamma irradiation on the yield of cucumber grown under field and protected conditions

    International Nuclear Information System (INIS)

    Al-Oudat, M.; Ayyoubi, Z.; Razzouk, A.K.

    1994-08-01

    Presowing seed irradiation has been reported as a useful application of radiation in agriculture to stimulate growth and increase the yield of certain field crops. To the best of our knowledge the feasibility of this treatment has not yet been tested on cucumber in Syria. Our experiments were carried out in field and greenhouse conditions. Two experiments were under field conditions, the first at Der-El-Hajar (Unfertile soil with high mean temperature), and the second at Khan-El-Sheeh (fertile soil with lower mean temperature), in these two experiments local variety was used. The third experiment was under greenhouse condition using two varieties, F1 Hybrid Taha and Sahara. Samples of air dried seeds of previous season were irradiated by gamma rays from a 60 Co source using doses of 2, 3, 4, 5, 7.5, 10 and 15 Gy at dose rate of 0.8 Gy/min. Seeds were planted after two days from irradiation and replicated 4 times. The data revealed that gamma irradiation at interval doses of 3-7.5 Gy led to increase the number of leaves and plant height. The radiation treatment had stimulating effects on earliness especially for doses of 4-7.5 Gy in Khan-El-Sheeh (14-31%) and 7.5 Gy in Der-El-Hajar (28%). In greenhouse dose of 2-4 Gy and 2-7.5 Gy stimulate the earliness by 12-36% and 11-18% for Sahara and Taha varieties respectively. The results of total yield (as well as fruits number) were significantly increased when doses of 7.5 Gy in Der-El-Hajar (25%) and 4 and 5 Gy in Khan-El-Sheeh (28-30%). The optimum doses in greenhouse condition ranged between 32-4 Gy for Taha var. and 4-5 Gy for Sahara var., and the percentage of increment was 19 and 16% respectively. In view of all above mentioned results, the use of radiation might be recommended as easy tool for seed treatment to stimulate earliness and increase productivity of cucumber. (author). 17 refs., 23 tabs

  4. Behavior of pre-irradiated fuel under a simulated RIA condition. Results of NSRR Test JM-5

    International Nuclear Information System (INIS)

    Fuketa, Toyoshi; Sasajima, Hideo; Mori, Yukihide; Tanzawa, Sadamitsu; Ishijima, Kiyomi; Kobayashi, Shinsho; Kamata, Hiroshi; Homma, Kozo; Sakai, Haruyuki.

    1995-11-01

    This report presents results from the power burst experiment with pre-irradiated fuel rod, Test JM-5, conducted in the Nuclear Safety Research Reactor (NSRR). The data concerning test method, pre-irradiation, pre-pulse fuel examination, pulse irradiation, transient records and post-pulse fuel examination are described, and interpretations and discussions of the results are presented. Preceding to the pulse irradiation in the NSRR, test fuel rod was irradiated in the Japan Materials Testing Reactor (JMTR) up to a fuel burnup of 25.7 MWd/kgU with average linear heat rate of 33.4 kW/m. The fuel rod was subjected to the pulse irradiation resulting in a desposited energy of 223 ± 7 cal/g·fuel (0.93 ± 0.03 kJ/g·fuel) and a peak fuel enthalpy of 167 ± 5 cal/g·fuel (0.70 ± 0.02 kJ/g·fuel) under stagnant water cooling condition at atmospheric pressure and ambient temperature. Test fuel rod behavior was assessed from pre- and post-pulse fuel examinations and transient records during the pulse. The Test JM-5 resulted in cladding failure. More than twenty small cracks were found in the post-test cladding, and most of the defects located in pre-existing locally hydrided region. The result indicates an occurrence of fuel failure by PCMI (pellet/cladding mechanical interaction) in combination with decreased integrity of hydrided cladding. (author)

  5. Performance analysis of a SOFC under direct internal reforming conditions

    Energy Technology Data Exchange (ETDEWEB)

    Janardhanan, Vinod M.; Deutschmann, Olaf [Institute for Chemical Technology and Polymer Chemistry, Engesserstr 20, D-76131 Karlsruhe, University of Karlsruhe (Germany); Heuveline, Vincent [Institute for Applied and Numerical Mathematics, Kaiserstr. 12, D-76128 Karlsruhe (Germany)

    2007-10-11

    This paper presents the performance analysis of a planar solid-oxide fuel cell (SOFC) under direct internal reforming conditions. A detailed solid-oxide fuel cell model is used to study the influences of various operating parameters on cell performance. Significant differences in efficiency and power density are observed for isothermal and adiabatic operational regimes. The influence of air number, specific catalyst area, anode thickness, steam to carbon (s/c) ratio of the inlet fuel, and extend of pre-reforming on cell performance is analyzed. In all cases except for the case of pre-reformed fuel, adiabatic operation results in lower performance compared to isothermal operation. It is further discussed that, though direct internal reforming may lead to cost reduction and increased efficiency by effective utilization of waste heat, the efficiency of the fuel cell itself is higher for pre-reformed fuel compared to non-reformed fuel. Furthermore, criteria for the choice of optimal operating conditions for cell stacks operating under direct internal reforming conditions are discussed. (author)

  6. Performance analysis of a SOFC under direct internal reforming conditions

    Science.gov (United States)

    Janardhanan, Vinod M.; Heuveline, Vincent; Deutschmann, Olaf

    This paper presents the performance analysis of a planar solid-oxide fuel cell (SOFC) under direct internal reforming conditions. A detailed solid-oxide fuel cell model is used to study the influences of various operating parameters on cell performance. Significant differences in efficiency and power density are observed for isothermal and adiabatic operational regimes. The influence of air number, specific catalyst area, anode thickness, steam to carbon (s/c) ratio of the inlet fuel, and extend of pre-reforming on cell performance is analyzed. In all cases except for the case of pre-reformed fuel, adiabatic operation results in lower performance compared to isothermal operation. It is further discussed that, though direct internal reforming may lead to cost reduction and increased efficiency by effective utilization of waste heat, the efficiency of the fuel cell itself is higher for pre-reformed fuel compared to non-reformed fuel. Furthermore, criteria for the choice of optimal operating conditions for cell stacks operating under direct internal reforming conditions are discussed.

  7. Influence of conditioned psychological stress on immunological recovery in mice exposed to low-dose x irradiation

    International Nuclear Information System (INIS)

    Sato, K.; Flood, J.F.; Makinodan, T.

    1984-01-01

    A study was initiated to determine the effects of psychological stress on the immune response in BALB/c mice recovering from exposure to a low dose of ionizing radiation. Mice were first subjected to conditioning training for 12 days, then exposed to 200 R, subjected to psychological stress for 14 days, and assessed for peak anti-sheep RBC response. The seven treatment groups included two unirradiated groups and five irradiated groups. Mice exposed to 200 R and then subjected to conditioned psychological stress responded less vigorously to antigenic stimulation than those of the other irradiated groups. The psychological stress imposed upon these mice did not influence the antibody-forming capacity of unirradiated mice. These results indicate that a psychological stress which did not affect the immunological activity of unirradiated mice can curtail the immunological recovery of mice exposed to low doses of ionizing radiation

  8. Food preservation by irradiation

    International Nuclear Information System (INIS)

    Gottschalk, M.

    1978-01-01

    In November, 1977, an International Symposium on Food Preservation by Irradiation was held at Wageningen, the Netherlands. About 200 participants attended the Symposium which was organised by the International Atomic Energy Agency, the Food and Agriculture Organization of the United Nations and the World Health Organization; a reflection of the active interest which is being shown in food irradiation processing, particularly among developing countries. The 75 papers presented provided an excellent review of the current status of food irradiation on a wide range of different topics, and the Symposium also afforded the valuable opportunity for informal discussion among the participants and for developing personal contacts. A brief survey of the salient aspects discussed during the course of the meeting are reported on. (orig.) [de

  9. Irradiation creep under 60 MeV alpha irradiation

    International Nuclear Information System (INIS)

    Reiley, T.C.; Shannon, R.H.; Auble, R.L.

    1980-01-01

    Accelerator-produced charged-particle beams have advantages over neutron irradiation for studying radiation effects in materials, the primary advantage being the ability to control precisely the experimental conditions and improve the accuracy in measuring effects of the irradiation. An apparatus has recently been built at ORNL to exploit this advantage in studying irradiation creep. These experiments employ a beam of 60 MeV alpha particles from the Oak Ridge Isochronous Cyclotron (ORIC). The experimental approach and capabilities of the apparatus are described. The damage cross section, including events associated with inelastic scattering and nuclear reactions, is estimated. The amount of helium that is introduced during the experiments through inelastic processes and through backscattering is reported. Based on the damage rate, the damage processes and the helium-to-dpa ratio, the degree to which fast reactor and fusion reactor conditions may be simulated is discussed. Recent experimental results on the irradiation creep of type 316 stainless steel are presented, and are compared to light ion results obtained elsewhere. These results include the stress and temperature dependence of the formation rate under irradiation. The results are discussed in relation to various irradiation creep mechanisms and to damage microstructure as it evolves during these experiments. (orig.)

  10. Alloys under irradiation

    International Nuclear Information System (INIS)

    Martin, G.; Bellon, P.; Soisson, F.

    1997-01-01

    During the last two decades, some effort has been devoted to establishing a phenomenology for alloys under irradiation. Theoretically, the effects of the defect supersaturation, sustained defect fluxes and ballistic mixing on solid solubility under irradiation can now be formulated in a unified manner, at least for the most simple cases: coherent phase transformations and nearest-neighbor ballistic jumps. Even under such restrictive conditions, several intriguing features documented experimentally can be rationalized, sometimes in a quantitative manner and simple qualitative rules for alloy stability as a function of irradiation conditions can be formulated. A quasi-thermodynamic formalism can be proposed for alloys under irradiation. However, this point of view has limits illustrated by recent computer simulations. (orig.)

  11. Food irradiation seminar: Asia and the Pacific

    International Nuclear Information System (INIS)

    Mitchell, G.E.

    1986-01-01

    The report covers the Seminar for Asia and the Pacific on the practical application of food irradiation. The seminar assessed the practical application of food irradiation processes, commercial utilisation and international trade of irradiated food

  12. On the material durability under irradiation conditions

    International Nuclear Information System (INIS)

    Kiselevskij, V.N.; Kosov, B.D.

    1977-01-01

    The initial principle adopted for the construction of a phenomenological model of the failure of irradiated steel, as proposed in the paper of V.A. Tsykanov and coworkers, is analized and some critical remarks made

  13. Regulatory aspect of food irradiation

    International Nuclear Information System (INIS)

    Harrison Aziz

    1985-01-01

    Interest in the process of food irradiation is reviewed once again internationally. Although food irradiation has been thoroughly investigated, global acceptance is still lacking. Factors which impede the progress of the technology are discussed here. (author)

  14. Effects of condition in vitro on the irradiation sensitivity of scales

    International Nuclear Information System (INIS)

    Zhang Dongxue; Wang Dan; Zhang Zhiwei

    2007-01-01

    The effects of irradiation and the interactions between irradiation and the ingredients of culture medium and the type of explants on radiation sensitivity of scales of lily were studied. The results showed that when lily scales were exposed to after cultured in vitro for about six days. The survival rate of scales in vitro decreased with the increase of irradiation dose. Irradiation significantly inhibited the sprouting rate and the number of sprouts of scales in vitro. During the bud induction, the effects of ingredients of culture medium on radiation sensitivity of scales were obvious at certain degree, and also the culture time. Both exterior scales and middle scales appeared an identical irradiation sensitivity. (authors)

  15. High activity gamma irradiators developed in Hungary

    International Nuclear Information System (INIS)

    Stenger, V.

    1997-01-01

    The development of high activity Gamma irradiators began in Hungary already in the early years of 60s. The very first designs were serving research in irradiation chemistry, radiation physics, food and agricultural research, radiation sterilization, plastic radiation chemistry, radiobiology, cancer therapy, personal and high dose dosimetry, following the international trends. Domestic and new international demands forced us to design and construct High Activity Gamma Irradiators: Multipurpose Pilot, Portable and Large scale bulk, Multipurpose Industrial scale types

  16. Prediction of irradiation damage effects by multi-scale modelling: EURATOM 3 Framework integrated project perfect

    International Nuclear Information System (INIS)

    Massoud, J.P.; Bugat, St.; Marini, B.; Lidbury, D.; Van Dyck, St.; Debarberis, L.

    2008-01-01

    Full text of publication follows. In nuclear PWRs, materials undergo degradation due to severe irradiation conditions that may limit their operational life. Utilities operating these reactors must quantify the aging and the potential degradations of reactor pressure vessels and also of internal structures to ensure safe and reliable plant operation. The EURATOM 6. Framework Integrated Project PERFECT (Prediction of Irradiation Damage Effects in Reactor Components) addresses irradiation damage in RPV materials and components by multi-scale modelling. This state-of-the-art approach offers potential advantages over the conventional empirical methods used in current practice of nuclear plant lifetime management. Launched in January 2004, this 48-month project is focusing on two main components of nuclear power plants which are subject to irradiation damage: the ferritic steel reactor pressure vessel and the austenitic steel internals. This project is also an opportunity to integrate the fragmented research and experience that currently exists within Europe in the field of numerical simulation of radiation damage and creates the links with international organisations involved in similar projects throughout the world. Continuous progress in the physical understanding of the phenomena involved in irradiation damage and continuous progress in computer sciences make possible the development of multi-scale numerical tools able to simulate the effects of irradiation on materials microstructure. The consequences of irradiation on mechanical and corrosion properties of materials are also tentatively modelled using such multi-scale modelling. But it requires to develop different mechanistic models at different levels of physics and engineering and to extend the state of knowledge in several scientific fields. And the links between these different kinds of models are particularly delicate to deal with and need specific works. Practically the main objective of PERFECT is to build

  17. Investigation of instability of M23C6 particles in F82H steel under electron and ion irradiation conditions

    Science.gov (United States)

    Kano, Sho; Yang, Huilong; Shen, Jingjie; Zhao, Zishou; McGrady, John; Hamaguchi, Dai; Ando, Mamami; Tanigawa, Hiroyasu; Abe, Hiroaki

    2018-04-01

    In order to clarify the instability of M23C6 in F82H steel under irradiation, both electron irradiation using a high voltage electron microscope (HVEM) and ion irradiation using an ion accelerator were performed. For the electron irradiation, in-situ observation under 2 MV electron irradiation and ex-situ high resolution electron microscopic (HREM) analysis were utilized to evaluate the response of M23C6 against irradiation. The temperature dependence of the irradiation induced instability of the carbide was first confirmed: 293 K indicating severe loss of crystallinity due to dissolution of the constituent atoms though irradiation-enhanced diffusion under the vacancy diffusion by the focused electron beam irradiation. For the ion irradiation, 10.5 MeV-Fe3+ ion was applied to bombard the F82H steel at 673 K to achieve the displacement damage of ≈20 dpa at the depth of 1.0 μm from surface. Cross-section TEM specimens were prepared by a focused ion beam technique. The shrinkage of carbide particles was observed especially near the irradiation surface. Besides, the lattice fringes at the periphery of carbide were observed in the irradiated M23C6 by the HREM analysis, which is different from that observed in the electron irradiation. It was clarified that the instability of M23C6 is dependent on the irradiation conditions, indicating that the flow rate of vacancy type defects might be the key factor to cause the dissolution of constituent atoms of carbide particles into matrix under irradiation.

  18. The prospect of food irradiation and the contribution of radiation chemistry to enact the hygienic safety standard of irradiated foods

    International Nuclear Information System (INIS)

    Wu Jilan; Yuan Rongyao

    1986-01-01

    Now, it is said that we are at the dawn of food irradiation application both nationally and internationally. However, referring to the acceptability of customers the labeling of irradiated foods has been a nightmare to the food processors. On the other hand the recommended international standard has the shortcomings of thinking in absolute terms. In this paper a proposal which puts special emphasis on enacting hygienic safety standard of individual irradiated food is recommended. The hygienic safety standard of the irradiated food may be classified in three classes: 1) its hygienic safety standard is similar to that of common food; 2) the maximum permissible quantities of harmful compounds induced by radiation must be controlled; and 3) the quantity of unique radiolysis products may by dutermined. Radiation chemistry plays an important role in enacting the hygienic safety standard of irradiated foods. For international cooperation in this field some suggestions are made

  19. Enhanced solar global irradiance during cloudy sky conditions

    Energy Technology Data Exchange (ETDEWEB)

    Schade, N.H.; Sandmann, H.; Stick, C. [Kiel Univ. (Germany). Inst. fuer Medizinische Klimatologie; Macke, A. [Kiel Univ. (DE). Leibniz Inst. fuer Meereswissenschaften (IFM-GEOMAR)

    2007-06-15

    The impact of cloudiness on the shortwave downwelling radiation (SDR) at the surface is investigated by means of collocated pyranometer radiation measurements and all-sky imager observations. The measurements have been performed in Westerland, a seaside resort on the North Sea island of Sylt, Germany, during summer 2004 and 2005. A main improvement to previous studies on this subject resulted from the very high temporal resolution of cloud images and radiation measurements and, therefore, a more robust statistical analysis of the occurrence of this effect. It was possible to observe an excess of solar irradiation compared to clear sky irradiation by more than 500 W/m{sup 2}, the largest observed excess irradiation to our knowledge so far. Camera images reveal that largest excess radiation is reached close to overcast situations with altocumulus clouds partly obscuring the solar disk, and preferably with cumulus clouds in lower levels. The maximum duration of the enhancements depends on its strength and ranges from 20 seconds (enhancements > 400 W/m{sup 2}) up to 140 seconds (enhancements > 200 W/m{sup 2}). (orig.)

  20. Development of a quality system for a contract irradiation facility

    International Nuclear Information System (INIS)

    Siyakus, G.

    2002-01-01

    The use of Industrial Irradiation Systems, in order to process medical supplies and food commodities, has almost 50 years experiences in the world. The food irradiation process has been approved by more than 40 countries around the world and it has been endorsed or supported by numerous national and international organizations and professional groups. Today, radiation sterilization of medical supplies is the most preferred technology in almost every developed country. Other applications: such as waste and flue gas treatment, polymer processing are also put into practice in wider range than before. Higher capital cost compared to the operation cost, the nature of continuous decay of the radiation sources used to obtain gamma rays, obligate the owners of gamma facilities to operate systems based on the 24 hours a day and 7 days per week. On the other hand, higher throughput capacity and economical brake point for profitability, force irradiation companies to offer service for the varied products of the companies. Industrial irradiation facilities providing services for varied companies by irradiating different kind of commodities so called contract irradiator or multipurpose irradiator and most of the irradiation facilities, particularly gamma irradiators running in different locations of the World, operates as contract irradiators. The radiation facilities are considered as a part of the manufacturing process, and must conform to the pertinent general Code of Good Manufacturing Practice (GMP) which has been declared by the principal producer. Customers of these facilities may have petitions, such as irradiation temperature, dose rate, minimal and maximal doses; storage conditions before and after irradiation. Design parameters related to the dose rate, product size, density and weight, irradiation and storage temperatures are the main limitations. Varied process conditions can be easily applied in the laboratory may set forth difficulties in industrial processes

  1. Innovative approaches to the Management of Irradiated Nuclear Graphite Wastes: Addressing the Challenges through International Collaboration with Project 'GRAPA'

    International Nuclear Information System (INIS)

    Wickham, A.J.; Ojovan, M.; O'Sullivan, P.; )

    2017-01-01

    There exists more than 250.000 tonnes of irradiated (and therefore radioactive) nuclear graphite (i-graphite) in the world, primarily as a result of the development of graphite-moderated power-reactor systems, initially for defence and subsequently for commercial purposes. Only a very small number of such plants have been dismantled and, for most cases, the final destiny of the irradiated graphite remains unresolved. Future high-temperature reactor programmes, such as the Chinese HTR-PM development, will produce more graphite and carbonaceous wastes from both structural components and the fuel pebbles (which are approximately 96% carbonaceous), the latter producing a continuous stream of so-called 'operational waste'. The problem of dismantling irradiated graphite reactor stacks, possibly distorted through neutron damage and in some cases degraded further by radiation-chemical attack by gaseous coolants, and then finding the appropriate treatments and final destiny of the material, has exercised both the European Union and the International Atomic Energy Agency for more than 25 years, seeking to address the different issues and available disposal solutions in different IAEA Member States. An IAEA collaborative research programme on treatment options has recently been completed, and an active group of international specialists in this area has now been established as part of the IAEA International Decommissioning Network under the envelope of Project 'GRAPA' (Irradiated Graphite Processing Approaches), which includes representatives from Belgium, China, France, Germany, India, Italy, Lithuania, Rep. of Korea, Romania, Spain, Switzerland, Ukraine and the Russian Federation with direct responsibilities for various parts of the decommissioning and graphite-disposal process in a variety of reactor designs. Interest has also been expressed by colleagues from Sweden and Japan. Work is in progress on a number of topic areas where weaknesses in the

  2. Behavior and failure of fresh, hydrided and irradiated Zircaloy-4 fuel claddings under RIA conditions

    International Nuclear Information System (INIS)

    Le Saux, M.

    2008-01-01

    The purpose of this study is to characterize and simulate the mechanical behaviour and failure of fresh, hydrided and irradiated (in pressurized water reactors) cold-worked stress relieved Zircaloy-4 fuel claddings under reactivity initiated accident conditions. A model is proposed to describe the anisotropic viscoplastic mechanical behavior of the material as a function of temperature (from 20 C up to 1100 C), strain rate (from 3.10 -4 s -1 up to 5 s -1 ), fluence (from 0 up to 1026 n.m -2 ) and irradiation conditions. Axial tensile, hoop tensile, expansion due to compression and hoop plane strain tensile tests are performed at 25 C, 350 C and 480 C in order to analyse the anisotropic plastic and failure properties of the non-irradiated material hydrided up to 1200 ppm. Material strength and strain hardening depend on temperature and hydrogen in solid solution and precipitated hydride contents. Plastic anisotropy is not significantly modified by hydrogen. The material is embrittled by hydrides at room temperature. The plastic strain that leads to hydride cracking decreases with increasing hydrogen content. The material ductility, which increases with increasing temperature, is not deteriorated by hydrogen at 350 C and 480 C. Macroscopic fracture modes and damage mechanisms depend on specimen geometry, temperature and hydrogen content. A Gurson type model is finally proposed to describe both the anisotropic viscoplastic behavior and the ductile fracture of the material as a function of temperature and hydrogen content. (author) [fr

  3. Detection methods of irradiated foodstuffs

    Energy Technology Data Exchange (ETDEWEB)

    Ponta, C C; Cutrubinis, M; Georgescu, R [IRASM Center, Horia Hulubei National Institute for Physics and Nuclear Engineering, PO Box MG-6, RO-077125 Magurele-Bucharest (Romania); Mihai, R [Life and Environmental Physics Department, Horia Hulubei National Institute for Physics and Nuclear Engineering, PO Box MG-6, RO-077125 Magurele-Bucharest (Romania); Secu, M [National Institute of Materials Physics, Bucharest (Romania)

    2005-07-01

    Full text: Food irradiation has, in certain circumstances, an important role to play both in promoting food safety and in reducing food losses. The safety and availability of nutritious food are essential components of primary health care. WHO actively encourages the proper use of food irradiation in the fight against foodborne diseases and food losses. To this end, it collaborates closely with FAO and IAEA. Food irradiation can have a number of beneficial effects, including delay of ripening and prevention of sprouting; control of insects, parasites, helminths, pathogenic and spoilage bacteria, moulds and yeasts; and sterilization, which enables commodities to be stored unrefrigerated for long periods. The 1990s witnessed a significant advancement in food irradiation processing. As a result, progress has been made in commercialization of the technology, culminating in greater international trade in irradiated foods and the implementation of differing regulations relating to its use in many countries. Codex General Standard for Irradiated Foodstuffs and Recommended International Code of Practice for the Operation of Irradiation Facilities Used for the Treatment of Foods regulate food irradiation at international level. At European Union level there are in power Directive 1999/2/EC and Directive1999/3/EC. Every particular country has also its own regulations regarding food irradiation. In Romania, since 2002 the Norms Regarding Foodstuffs and Food Ingredients Treated by Ionizing Radiation are in power. These Norms are in fact the Romanian equivalent law of the European Directives 1999/2/EC and 1999/3/EC. The greater international trade in irradiated foods has led to the demand by consumers that irradiated food should be clearly labeled as such and that methods capable of differentiating between irradiated and nonirradiated products should be available. Thus a practical basis was sought to allow consumers to exercise a free choice as to which food they purchase. If a

  4. Study of the Conditions of Irradiating Laser for Removal of Toner from Used Paper

    Science.gov (United States)

    Ihori, Haruo; Inagawa, Yuki; Ito, Naohiro; Fujii, Masaharu; Ninomiya, Hideki

    Though it is said to the paper-less age with the spread of personal computer, amount of office papers to be used doesn't have tendency to decrease. In general, used papers are recovered and recycled in order to preserve the environment. The labor and costs are required for the recovery of used papers and a recycled paper is lower in quality. If we could reuse used papers repeatedly without withdrawing those, for example, by copying machine that could print again with removing toner on used paper, it is very convenient and ecological. So, we studied about removing toner from used papers by application of the laser ablation technique. As an optical source, SHG-YAG laser was chosen. For removal of toner from used papers, the energy density to irradiate them with SHG-YAG laser was examined. When approximately 12mJ/mm2 of the energy density, which was average value, toner was removed so much as to be able to reuse again. Moreover, conditions of the laser irradiation, concretely, the velocity scanning the laser and the number of the irradiation, were studied.

  5. Identification of irradiated foods prospects for post-irradiation estimate of irradiation dose in irradiated dry egg products

    International Nuclear Information System (INIS)

    Katusin-Raxem, B.; Mihaljievic, B.; Razem, D.

    2002-01-01

    Radiation-induced chemical changes in foods are generally very small at the usual processing doses. Some exception is radiation degradation of lipids, which are the components most susceptible to oxidation. A possible use of lipid hydroperoxides (LOOH) as indicators of irradiation is described for whole egg and egg yolk powders. A sensitive and reproducible spectrophotometric method for LOOH measurement based on feric thiocyanate, as modified in our laboratory, was applied. This method enabled the determination of LOOH, including oleic acid hydroperoxides, which is usually not possible with some other frequently used methods. The lowest limit of 0.05 mmol LOOH/kg lipid could be measured. The measurements were performed in various batches of whole egg and egg yolk powders by the same producer, as well as in samples supplied by various producers. Baseline level in unirradiated egg powder 0.110 ± 0.067 mmol LOOH /kgL was established. The formation of LOOH with dose, as well as the influence of age, irradiation conditions, storage time and storage conditions on LOOH were investigated. The irradiation of whole egg and egg yolk powders in the presence of air revealed an initially slow increase of LOOH, caused by an inherent antioxidative capacity, followed by a fast linear increase after the inhibition dose (D o ). In all investigated samples D o of 2 kGy was determined. Hydroperoxides produced in irradiated materials decay with time. In whole egg and egg yolk powders, after an initially fast decay, the level of LOOH continued to decrease by the first-order decay. Nevertheless, after a six months storage it was still possible to unambiguously identify samples which had been irradiated with 2 kGy in the presence of air. Reirradiation of these samples revealed a significant reduction of D o to 1 kGy. In samples irradiated with 4 kGy and kept under the same conditions, the shortening of D o to 0.5 kGy was determined by reirradiation. This offers a possibility for the

  6. Food irradiation: Technology transfer in Asia, practical experiences

    Science.gov (United States)

    Kunstadt, Peter; Eng, P.

    1993-10-01

    Nordion International Inc., in cooperation with the Thai Office of Atomic Energy for Peace (OAEP) and the Canadian International Development Agency (CIDA) recently completed a unique food irradiation technology transfer project in Thailand. This complete food irradiation technology transfer project included the design and construction of an automatic multipurpose irradiation facility as well as the services of construction and installation management and experts in facility operation, maintenance and training. This paper provides an insight into the many events that led to the succesful conclusion of the world's first complete food irradiation technology transfer project.

  7. Food irradiation: technology transfer in Asia, practical experiences

    International Nuclear Information System (INIS)

    Kunstadt, P.

    1993-01-01

    Nordion International Inc., in cooperation with the Thai Office of Atomic Energy for Peace (OAEP) and the Canadian International Development Agency (CIDA) recently completed a unique food irradiation technology transfer project in Thailand. This complete food irradiation technology transfer project included the design and construction of an automatic multipurpose irradiation facility as well as the services of construction and installation management and experts in facility operation, maintenance and training. This paper provides an insight into the many events that led to the successful conclusion of the world's first complete food irradiation technology transfer project. (Author)

  8. Genomic instability after targeted irradiation of human lymphocytes: Evidence for inter-individual differences under bystander conditions

    International Nuclear Information System (INIS)

    Kadhim, Munira A.; Lee, Ryonfa; Moore, Stephen R.; Macdonald, Denise A.; Chapman, Kim L.; Patel, Gaurang; Prise, Kevin M.

    2010-01-01

    Environmental 222 radon exposure is a human health concern, and many studies demonstrate that very low doses of high LET α-particle irradiation initiate deleterious genetic consequences in both irradiated and non-irradiated bystander cells. One consequence, radiation-induced genomic instability (RIGI), is a hallmark of tumorigenesis and is often assessed by measuring delayed chromosomal aberrations. We utilised a technique that facilitates transient immobilization of primary lymphocytes for targeted microbeam irradiation and have reported that environmentally relevant doses, e.g. a single 3 He 2+ particle traversal to a single cell, are sufficient to induce RIGI. Herein we sought to determine differences in radiation response in lymphocytes isolated from five healthy male donors. Primary lymphocytes were irradiated with a single particle per cell nucleus. We found evidence for inter-individual variation in radiation response (RIGI, measured as delayed chromosome aberrations). Although this was not highly significant, it was possibly masked by high levels of intra-individual variation. While there are many studies showing a link between genetic predisposition and RIGI, there are few studies linking genetic background with bystander effects in normal human lymphocytes. In an attempt to investigate inter-individual variation in the induction of bystander effects, primary lymphocytes were irradiated with a single particle under conditions where fractions of the population were traversed. We showed a marked genotype-dependent bystander response in one donor after exposure to 15% of the population. The findings may also be regarded as a radiation-induced genotype-dependent bystander effect triggering an instability phenotype.

  9. Genomic instability after targeted irradiation of human lymphocytes: Evidence for inter-individual differences under bystander conditions

    Energy Technology Data Exchange (ETDEWEB)

    Kadhim, Munira A., E-mail: mkadhim@brookes.ac.uk [School of Life Sciences, Oxford Brookes University, Oxford OX3 0BP (United Kingdom); Lee, Ryonfa [Biophysics, GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Planckstrasse 1, D-64291 Darmstadt (Germany); Moore, Stephen R.; Macdonald, Denise A. [Radiation and Genome Stability Unit, Medical Research Council, Harwell, Oxfordshire OX11 0RD (United Kingdom); Chapman, Kim L. [School of Life Sciences, Oxford Brookes University, Oxford OX3 0BP (United Kingdom); Patel, Gaurang; Prise, Kevin M. [Centre for Cancer Research and Cell Biology, Queen' s University Belfast, Belfast BT9 7BL (United Kingdom)

    2010-06-01

    Environmental {sup 222}radon exposure is a human health concern, and many studies demonstrate that very low doses of high LET {alpha}-particle irradiation initiate deleterious genetic consequences in both irradiated and non-irradiated bystander cells. One consequence, radiation-induced genomic instability (RIGI), is a hallmark of tumorigenesis and is often assessed by measuring delayed chromosomal aberrations. We utilised a technique that facilitates transient immobilization of primary lymphocytes for targeted microbeam irradiation and have reported that environmentally relevant doses, e.g. a single {sup 3}He{sup 2+} particle traversal to a single cell, are sufficient to induce RIGI. Herein we sought to determine differences in radiation response in lymphocytes isolated from five healthy male donors. Primary lymphocytes were irradiated with a single particle per cell nucleus. We found evidence for inter-individual variation in radiation response (RIGI, measured as delayed chromosome aberrations). Although this was not highly significant, it was possibly masked by high levels of intra-individual variation. While there are many studies showing a link between genetic predisposition and RIGI, there are few studies linking genetic background with bystander effects in normal human lymphocytes. In an attempt to investigate inter-individual variation in the induction of bystander effects, primary lymphocytes were irradiated with a single particle under conditions where fractions of the population were traversed. We showed a marked genotype-dependent bystander response in one donor after exposure to 15% of the population. The findings may also be regarded as a radiation-induced genotype-dependent bystander effect triggering an instability phenotype.

  10. Comparison of normal tissue dose with three-dimensional conformal techniques for breast cancer irradiation including the internal mammary nodes

    NARCIS (Netherlands)

    van der Laan, Hans Paul; Dolsma, Willemtje; van t Veld, Aart; Bijl, HP; Langendijk, JA

    2005-01-01

    PURPOSE: To compare the Para Mixed technique for irradiation of the internal mammary nodes (IMN) with three commonly used strategies, by analyzing the dose to the heart and other organs at risk. METHODS AND MATERIALS: Four different three-dimensional conformal dose plans were created for 30 breast

  11. Performance and internal flow condition of mini centrifugal pump with splitter blades

    International Nuclear Information System (INIS)

    Shigemitsu, T; Fukutomi, J; Kaji, K; Wada, T

    2012-01-01

    Mini centrifugal pumps having a diameter smaller than 100mm are employed in many fields. But the design method for the mini centrifugal pump is not established because the internal flow condition for these small-sized fluid machines is not clarified and conventional theory is not suitable for small-sized pumps. Therefore, mini centrifugal pumps with simple structure were investigated by this research. Splitter blades were adopted in this research to improve the performance and the internal flow condition of mini centrifugal pump which had large blade outlet angle. The original impeller without the splitter blades and the impeller with the splitter blades were prepared for an experiment. The performance tests are conducted with these rotors in order to investigate the effect of the splitter blades on performance and internal flow condition of mini centrifugal pump. On the other hand, a three dimensional steady numerical flow analysis is conducted with the commercial code (ANSYS-CFX) to investigate the internal flow condition in detail. It is clarified from the experimental results that the performance of the mini centrifugal pump is improved by the effect of the splitter blades. The blade-to-blade low velocity regions are suppressed in the case with the splitter blades and the total pressure loss regions are decreased. The effects of the splitter blades on the performance and the internal flow condition are discussed in this paper.

  12. Irradiation Effect on Oxidative Condition and Tocopherol Content of Vegetable Oils

    Directory of Open Access Journals (Sweden)

    Konstantinos Sflomos

    2007-06-01

    Full Text Available The effect on induction period and tocopherol content after γ-irradiation onsamples of olive oil and seed oils (sunflower and soybean was determined. In seed oilsamples 0, 100, 200 and 300 ppm of δ-tocopherol were added before irradiation with 1, 2and 3kGy. The results of induction period showed that, after irradiation, all samplespresented a significant decreased in resistance to oxidation. However, this decrease wasminimized when δ-tocopherol was added. Irradiation significantly decreased the level oftocopherols. δ-Tocopherol appeared more sensitive in irradiation process than α- andγ-tocopherol. The addition of δ-tocopherol significantly reduced, in most cases, thedepletion of the other tocopherols.

  13. Method for determining correction factors induced by irradiation of ionization chamber cables in large radiation field

    International Nuclear Information System (INIS)

    Rodrigues, L.L.C.

    1988-01-01

    A simple method was developed to be suggested to hospital physicists in order to be followed during large radiation field dosimetry, to evaluate the effects of cables, connectors and extension cables irradiation and to determine correction factors for each system or geometry. All quality control tests were performed according to the International Electrotechnical Commission for three clinical dosimeters. Photon and electron irradiation effects for cables, connectors and extention cables were investigated under different experimental conditions by means of measurements of chamber sensitivity to a standard radiation source of 90 Sr. The radiation induced leakage current was also measured for cables, connectors and extension cables irradiated by photons and electrons. All measurements were performed at standard dosimetry conditions. Finally, measurements were performed in large fields. Cable factors and leakage factors were determined by the relation between chamber responses for irradiated and unirradiated cables. (author) [pt

  14. Gamma radiation influence on internal quality factors of eggs

    International Nuclear Information System (INIS)

    Pombo, Carolina R.; Mano, Sergio B.

    2005-01-01

    Poultry egg is a fundamental item in the human diet due to its high nutritional value. Its treatment by irradiation in order to eliminate pathogenic bacteria has been authorized in the USA in 2000 limited to a dose of 3 kGy in contrast to the requirements of the Brazilian legislation that does not establish quantitative dose limits. However research on the sensory properties of irradiated eggs is still scarce in the literature. In this work, possible changes in the internal quality factors of eggs were investigated. The samples were irradiated with doses of 0, 0.5, 1.0, 1.5, 2.0 and 2.5 kGy at an average dose rate of 1.7 kGy/h in the research Cesium-137 irradiation facility at the Technological Center of the Army (CTEx) situated in Guaratiba, Rio de Janeiro (RJ). A total of 300 eggs sorted in 6 lots, one for each dose, were kept at room temperature being periodically inspected up to 20 days. The samples were analyzed for the following indicators of the internal quality of the eggs: Haugh unity, air chamber, yolk index, pH of the white and pH of the yolk. The results indicated that irradiation damages the structure of the white of the eggs reducing its consistency in addition to changing other parameters related to their internal quality. Therefore, it has been concluded that irradiation is not appropriate for the treatment of whole eggs in the conditions studied in this work. (author)

  15. Relationship between chromosomal aberration of bone marrow cells and dosage of irradiation after 46Sc internal pollution and external low dose X-irradiation in mice

    International Nuclear Information System (INIS)

    Li Guofu; Li Zhang; Wu Yin

    1989-01-01

    The relationship between chromosomal aberration of bone marrow cells and dosage in mice 24 h after 46 Sc internal pollution combined with external low dose whole body X-irradiation was quantiatively studied. The results showed that the relationship between chromosomal aberration and dosage was expressed in a linear regression equation. The chromosomal aberration rate was lower in the combined exposure than that of the sum of internal and external exposures, but higher than that of either the internal or external exposure singly. The relationship between chromosomal aberration and time was expressed in the following three phase exponential function: Y(t) = 2.9078 exp 0.27668t + 2.9371 exp -0.0778t + 2.3786 -0.01788t . By means of fit test, there was no significant difference between the determined and the theoretical values. The 90% theoretical values got from all the equations distributed over the determined values

  16. An AES Study of the Room Temperature Surface Conditioning of Technological Metal Surfaces by Electron Irradiation

    CERN Document Server

    Scheuerlein, C; Taborelli, M; Brown, A; Baker, M A

    2002-01-01

    The modifications to technological copper and niobium surfaces induced by 2.5 keV electron irradiation have been investigated in the context of the conditioning process occurring in particle accelerator ultra high vacuum systems. Changes in the elemental surface composition have been found using Scanning Auger Microscopy (SAM) by monitoring the carbon, oxygen and metal Auger peak intensities as a function of electron irradiation in the dose range 10-6 to 10-2 C mm-2. The surface analysis results are compared with electron dose dependent secondary electron and electron stimulated desorption yield measurements. Initially the electron irradiation causes a surface cleaning through electron stimulated desorption, in particular of hydrogen. During this period both the electron stimulated desorption and secondary electron yield decrease as a function of electron dose. When the electron dose exceeds 10-4 C mm-2 electron stimulated desorption yields are reduced by several orders of magnitude and the electron beam indu...

  17. Program of assessment of mechanical and corrosion mechanical properties of reactor internals materials due to operation conditions in WWERs

    International Nuclear Information System (INIS)

    Ruscak, M.; Zamboch, M.

    1998-01-01

    Reactor internals are subject to three principle operation influences: neutron and gamma irradiation, mechanical stresses, both static and dynamic, and coolant chemistry. Several cases of damage have been reported in previous years in both boiling and pressure water reactors. They are linked with the term of irradiation assisted stress corrosion cracking as a possible damage mechanism. In WWERs, the principal material used for reactor internals is austenitic titanium stabilized stainless steel 08Kh18N10T, however high strength steels are used as well. To assess the changes of mechanical properties and to determine whether sensitivity to intergranular cracking can be increased by high neutron fluences, the experimental program has been started. The goal is to assure safe operation of the internals as well as life management for all planned operation period. The program consists of tests of material properties, both mechanical and corrosion-mechanical. Detailed neutron fluxes calculation as well as stress and deformation calculations are part of the assessment. Model of change will be proposed in order to plan inspections of the facility. In situ measurements of internals will be used to monitor exact status of structure during operation. Tensile specimens manufactured from both base metal and model weld joint have been irradiated to the total fluences of 3-20 dpa. Changes of mechanical properties are tested by the tensile test, stress corrosion cracking tests are performed in the autoclave with water loop and active loading. Operation temperature, pressure and water chemistry are chosen for the tests. (author)

  18. Evaluation of the absorbed doses in conditions of external and internal contamination with radionuclides

    International Nuclear Information System (INIS)

    Milivojevic, K.; Stojanovic, D.; Markovic, P.

    1981-01-01

    In experimental conditions of contamination with radionuclides of the skin and skin injuries, an evaluation of the degree of local irradiation in decontamined region and doses absorbed in organs of selective accumulating was carried out by use of mathematical models and tissue-equivalent thermoluminescent dosemeters. The evaluation of the absorbed doses based on conception, that in adequate analyses of decontamination effect, as a most efficient medico-prophilactic measure from local and total irradiation, should be taken into account the total body burden of the penetrated radionuclide, selective accumulating in critical organs or tissues, as well as the residual radioactivity in decontaminated region. (author)

  19. Decommissioning of the self-contained irradiator Gammacell 500

    International Nuclear Information System (INIS)

    Llanes Rodriguez, Marisleidys; Rodriguez Perdomo, Yanet; Fraga Acosta, Daniel; Soto Alvarez, Evelio; Soler Roger, Dulce Maria; Abreu Mendez, Yuliel; Benitez Navarro, Juan Carlos; Salgado Mojena, Mercedes; Perez Reyes, Yolanda

    2011-01-01

    The National Center for Animal and Plant Health used a Gammacell 500 irradiator, with twelve cobalt 60 sealed sources, for sterilization and decontamination of medical devices, pharmaceuticals and several raw materials. Due to the 25 years of exploitation time of the equipment, it was decided to close the facility. For dismantling the equipment, a methodology was developed taking into account the currently national regulations, the recommendations of the Atomic International Energy Organization, the consultation from the operation and equipment maintenance manual and the operational history. The design and implementation of the procedure for the irradiator dismantling are described. The Institutional Irradiator Decommissioning License was obtained, awarded by the National Center for Nuclear Safety. The dismantling operations involved in the container extraction with the radioactive sources and bulk forming to be transported. The operations were performed under radiological security conditions, keeping control under dose and superficial contamination rate during the process. As a conclusion, the notification for the release of the facility was received. (author)

  20. Experiments on the proof of the repair of the DNA-damage in human fibroblasts in vitro, induced by PUVA-conditions and after UVC-irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Silla, R.

    1979-01-01

    Within the frame of the present study we tried to investigate in vitro the course of repair of DNA-damage which had been provoked by UV C-irradiation and by PUVA-conditions. In a preliminary test series the suppression of the semiconservative DNA-replication by hydroxyurea was investigated. It resulted that there is a four-fold suppression of the programmed DNA-synthesis. In the standard experiments 5 groups with 8-MOP plus various UV A-irradiation energies were compared with the not irradiated control groups, with the groups with 8-MOP, with UV A in two different doses, and with the UV C group. The test samples were marked with /sup 3/H-thymidine, whilst hydroxurea was added after a certain period of time (0, 1, 2, 4 hours). In each case the uptake of /sup 3/H-thymidine into the DNS - as expression of repair activity - was measured after one hour by the liquid scintigraphic method. These experiments proved an obvious repair activity of the groups, which had received UV C-irradiation, and of those under PUVA-conditions with low UV A-irradiation energies. The maximum values were found after one hour or after two hours respectively. The /sup 3/H-thymidine uptake is blocked by PUVA-conditions with increasing UV A-irradiation energies. Apparently this is also valid for 8-MOP only and for high UV A-doses only.

  1. Policy plan for the early approval for irradiated meat products and the promotion of irradiated meats in market

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ju Woon [Team for Radiation Food Science and Biotechnology, Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of); Kim, Wang Geun [Ministry of Education, Science and Technology, Seoul (Korea, Republic of); Kim, Kyong Su [Dept. of Food and Nutrition, Chosun University, Gwangju (Korea, Republic of); Yook, Hong Sun [Dept. of Food and Nutrition, Chungnam National University, Daejeon (Korea, Republic of); Kim, Cheon Jei [Division of Animal Life Science, Konkuk University, Seoul (Korea, Republic of)

    2008-11-15

    The consumption of meat products is gradually being increased by the development of livestock raising technology, industrialized farm management and international trade. This increased consumption also created new market for ready-to-eat and ready-to-cook meat products. However, these convenience meat products can be easily contaminated during the processing and storage by pathogens, and there have been many reported cases of food borne illness by meats. One of the most effective methods for the decontamination of meat products is the radiation technology. Food irradiation was the established, well-recognized and safe sterilization method. Many other countries researched the effect of irradiation on the meat products and approved the irradiation. In this article, the effectiveness, the international acceptance, the economics and the research trend of irradiation on meat products have been reviewed. Also, the policy plans for the early approval of the irradiated meat products in Korea and the promotion policy of irradiated meats in market were discussed.

  2. Policy plan for the early approval for irradiated meat products and the promotion of irradiated meats in market

    International Nuclear Information System (INIS)

    Lee, Ju Woon; Kim, Wang Geun; Kim, Kyong Su; Yook, Hong Sun; Kim, Cheon Jei

    2008-01-01

    The consumption of meat products is gradually being increased by the development of livestock raising technology, industrialized farm management and international trade. This increased consumption also created new market for ready-to-eat and ready-to-cook meat products. However, these convenience meat products can be easily contaminated during the processing and storage by pathogens, and there have been many reported cases of food borne illness by meats. One of the most effective methods for the decontamination of meat products is the radiation technology. Food irradiation was the established, well-recognized and safe sterilization method. Many other countries researched the effect of irradiation on the meat products and approved the irradiation. In this article, the effectiveness, the international acceptance, the economics and the research trend of irradiation on meat products have been reviewed. Also, the policy plans for the early approval of the irradiated meat products in Korea and the promotion policy of irradiated meats in market were discussed

  3. Influence of ion irradiation on internal residual stress in DLC films

    Energy Technology Data Exchange (ETDEWEB)

    Karaseov, Platon A., E-mail: platon.karaseov@rphf.spbstu.r [St. Petersburg State Polytechnic University, Polytechnicheskaya St. 29, 195251 St. Petersburg (Russian Federation); Podsvirov, Oleg A.; Karabeshkin, Konstantin V. [St. Petersburg State Polytechnic University, Polytechnicheskaya St. 29, 195251 St. Petersburg (Russian Federation); Vinogradov, Andrei Ya. [Ioffe Physicotechnical Institute RAS, Polytechnicheskaya 26, 195252 St. Petersburg (Russian Federation); Azarov, Alexander Yu. [St. Petersburg State Polytechnic University, Polytechnicheskaya St. 29, 195251 St. Petersburg (Russian Federation); Karasev, Nikita N. [State University of Information Technologies, Mechanics and Optics, Sablinskaya Str. 14, 197101 St. Petersburg (Russian Federation); Titov, Andrei I.; Smirnov, Alexander S. [St. Petersburg State Polytechnic University, Polytechnicheskaya St. 29, 195251 St. Petersburg (Russian Federation)

    2010-10-01

    The dependence of internal residual stress in thin diamond-like carbon films grown on Si substrate by PECVD technique on most important growth parameters, namely RF-power, DC bias voltage and substrate temperature, is described. Results show that compressive stress reaches the highest value of 2.7 GPa at low RF-power and DC bias. Increase of substrate temperature from 250 to 350 {sup o}C leads to nonlinear increase of stress value. Inhomogeneity of residual stress along the film surface disappears when film is deposited at temperatures above 275 {sup o}C. Post-growth film irradiation by P{sup +} and In{sup +} ions cause decrease of compressive stress followed by its inversion to tensile. For all ion energy combinations used residual stress changes linearly with normalized fluence up to 0.2 DPA with slope (8.7 {+-} 1.3) GPa/DPA.

  4. Philippines' experience in marketing irradiated foods

    International Nuclear Information System (INIS)

    Lustre, A. O.; Ang, L.; Dianco, A.

    1985-01-01

    The Food Terminal Inc. in Manila, in cooperation with the Philippine Atomic Energy Agency and with funding support from the International Atomic Energy Agency in Vienna has been conducting storage and marketing studies on onions, garlic and mangoes. The objective is to gather loss reduction data and consumer reaction information that can serve as a basis for evaluating the risks and benefits involved in the establishment of a commercial food irradiator in the country. These studies show that irradiation reduces low-temperature storage losses in onions and garlic by 10-40% and post-storage marketing losses at ambient conditions by 16-50% in onions. Post-storage marketing trials not only indicate a significant reduction in losses during shipping and retail sale but a large increase in the marketability of irradiated commodities as measured by the rate of sale of the commodity and the price which it commands during the selling period. No adverse consumer reaction occurred during the sale of irradiated foods labelled as such except for a few comments indicating fear, ignorance and/or curiosity. The importance of irradiation as a substitute quarantine treatment for mangoes and for eliminating Salmonella in frozen foods for export is discussed in relation to the growing importance of these commodities to the Philippines' non-traditional export markets. Other applications of irradiation that could result in a perceptible improvement in the marketability of food commodities in the Philippines are discussed. Marketing studies are invaluable in evaluating the potential benefits of a new technology as food irradiation. In view of this, there is great interest in the completion of a pilot plant for food irradiation by the Philippine Atomic Energy Commission. The design and capacity of this plant are discussed

  5. Can the sentinel lymph node technique affect decisions to offer internal mammary chain irradiation?

    International Nuclear Information System (INIS)

    Bourre, Jean-Cyril; Payan, Raoul; Collomb, Delphine; Gallazzini-Crepin, Celine; Calizzano, Alex; Desruet, Marie-Dominique; Pasquier, Dominique; Bolla, Michel; Fagret, Daniel; Vuillez, Jean-Philippe

    2009-01-01

    Identification of the sentinel lymph node (SLN) for small mammary tumours (cT1N0) sometimes leads to detection of internal mammary chain (IMC) drainage. This information is often ignored by physicians. The present study sought to determine the frequency with which an internal mammary SLN was identified by peritumoral injection of radioactive tracer, and then to determine the patients in whom identification of an internal mammary SLN could have an impact on the radiation treatment plan. Between March 2002 and March 2008, 622 SLN biopsies performed in a cohort of 608 patients were analysed. Technetium-labelled nanocolloids were administered via three peritumoral injections, completed by a deep prepectoral injection, with the entire procedure performed under echographic guidance. The SLN was identified in 607 of the 622 patients, including 174 (28.7%) in the IMC. A total of 161 successful internal mammary biopsies were performed. Of the 622 patients, 18 showed SLN involvement in the IMC. In 7 of these patients, only the internal mammary SLN was affected. Prophylactic irradiation of the IMC was indicated in 376 patients, but only in 18 (4.8%) of these patients was there effectively IMC involvement; internal mammary SLN biopsy failed in 7 patients (1.9%). SLN detection by peritumoral injection, combined with the systematic removal of the internal mammary SLN, enabled the involvement of this region to be found in a nonnegligible number of patients. Such information should make it possible to personalize treatment for patients with stage cT1 mammary cancer and thereby avoid needless internal mammary radiation therapy in a large number of patients (93.4% in our study). (orig.)

  6. Food irradiation: Some regulatory and technical aspects

    International Nuclear Information System (INIS)

    1985-10-01

    An Advisory Group by IAEA and FAO on Regulatory and Technological Requirements for Authorization of the Food Irradiation Process was held at IAEA Headquarters in Vienna from 5 to 9 November 1984. The task of the Advisory Group was to advise on the scientific and technological considerations affecting the implementation of the food irradiation process, with particular reference to the facilitation of international trade in irradiated foods and to develop guidance on how the various provisions of the Codex General Standard on Irradiated Foods could be incorporated into national legislation in order to facilitate international trade and avoid the occurence of trade barriers. Separate abstracts were prepared for the various presentations at this meeting

  7. Profitability of irradiation plants; Rentabilidad de plantas de irradiacion

    Energy Technology Data Exchange (ETDEWEB)

    Bustos R, M.E.; Gonzalez F, C.; Liceaga C, G.; Ortiz A, G. [Instituto Nacional de Investigaciones Nucleares, Apdo. Postal 18-1027, Col. Escandon, 11801 Mexico D.F. (Mexico)

    1997-12-31

    In any industrial process it is seek an attractive profit from the contractor and the social points of view. The use of the irradiation technology in foods allows keep their hygienically, which aid to food supply without risks for health, an increment of new markets and a losses reduction. In other products -cosmetics or disposable for medical use- which are sterilized by irradiation, this process allows their secure use by the consumers. The investment cost of an irradiation plant depends mainly of the plant size and the radioactive material reload that principally is Cobalt 60, these two parameters are in function of the type of products for irradiation and the selected doses. In this work it is presented the economic calculus and the financial costs for different products and capacities of plants. In general terms is determined an adequate utility that indicates that this process is profitable. According to the economic and commercial conditions in the country were considered two types of credits for the financing of this projects. One utilizing International credit resources and other with national sources. (Author)

  8. Internal migration and household living conditions in Ethiopia

    Directory of Open Access Journals (Sweden)

    Blessing Uchenna Mberu

    2006-06-01

    Full Text Available Using the 1998 Migration, Gender and Health Survey in Five Regions of Ethiopia, and multivariate regression techniques, this paper examines the relationship between internal migration and household living conditions. The analysis finds significant living condition advantage of permanent and temporary migrants over non-migrants. These advantages are primarily linked to migration selectivity by education and non-agricultural income. Once the independent effects of these variables are controlled, no statistical significant independent association exists between migration status and living conditions. Government policies of resettlement in the 1980s and ethnic federalism of the 1990s may have engendered stress migration and exacerbated poor living outcomes for return migrants. The resort to migration and/or resettlement as an individual or government policy response to periodic unfavorable conditions in places of origin is not strongly supported by this analysis as the key to improved living conditions. Promoting higher education and opportunities for employment outside the agricultural sector are more likely to yield improved living conditions in Ethiopia.

  9. Reactor internals design/analysis for normal, upset, and faulted conditions

    International Nuclear Information System (INIS)

    Burke, F.R.

    1977-06-01

    The analytical procedures used by Babcock and Wilcox to demonstrate the structural integrity of the 205-FA reactor internals are described. Analytical results are presented and compared to ASME Code allowable limits for Normal, Upset, and Faulted conditions. The particular faulted condition considered is a simultaneous loss-of-coolant accident and safe shutdown earthquake. The operating basis earthquake is addressed as an Upset condition

  10. Shelf-stable food through high dose irradiation

    International Nuclear Information System (INIS)

    Placek, V.; Svobodova, V.; Bartonicek, B.; Rosmus, J.; Camra, M.

    2004-01-01

    Irradiation of food with high doses (radappertization) is a way, how to prepare shelf-stable ready-to-eat food. The radappertization process requires that the food be heated at first to an internal temperature of at least 75 deg. C to inactivate autolytic enzyme, which could cause the spoilage during storage without refrigeration. In order to prevent radiation induced changes in sensory properties (off flavors, odors, undesirable color change, etc.) the food was vacuum packed and irradiated in frozen state at -30 deg. C or less to a minimum dose of 35 kGy. Such products have characteristics of fresh food prepared for eating even if they are stored for long time under tropical conditions. The wholesomeness (safety for consumption) has been confirmed during 40 years of testing. Within the NRI Rez 10 kinds of shelf-stable meat products have been prepared. The meat was cooked, vacuum packed in SiO x -containing pouch, freezed in liquid nitrogen and irradiated with electron beam accelerator. The microbial, chemical, and organoleptic properties have been tested

  11. Shelf-stable food through high dose irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Placek, V. E-mail: pla@ujv.cz; Svobodova, V.; Bartonicek, B.; Rosmus, J.; Camra, M

    2004-10-01

    Irradiation of food with high doses (radappertization) is a way, how to prepare shelf-stable ready-to-eat food. The radappertization process requires that the food be heated at first to an internal temperature of at least 75 deg. C to inactivate autolytic enzyme, which could cause the spoilage during storage without refrigeration. In order to prevent radiation induced changes in sensory properties (off flavors, odors, undesirable color change, etc.) the food was vacuum packed and irradiated in frozen state at -30 deg. C or less to a minimum dose of 35 kGy. Such products have characteristics of fresh food prepared for eating even if they are stored for long time under tropical conditions. The wholesomeness (safety for consumption) has been confirmed during 40 years of testing. Within the NRI Rez 10 kinds of shelf-stable meat products have been prepared. The meat was cooked, vacuum packed in SiO{sub x}-containing pouch, freezed in liquid nitrogen and irradiated with electron beam accelerator. The microbial, chemical, and organoleptic properties have been tested.

  12. Issues in food irradiation

    International Nuclear Information System (INIS)

    Mills, S.

    1987-04-01

    This discussion paper has two goals: first, to raise public awareness of food irradiation, an emerging technology in which Canada has the potential to build a new industry, mainly oriented to promising overseas markets; and second, to help build consensus among government and private sector decision makers about what has to be done to realize the domestic and export potential. The following pages discuss the potential of food irradiation; indicate how food is irradiated; outline the uses of food irradiation; examine questions of the safety of the equipment and both the safety and nutritional value of irradiated food; look at international commercial developments; assess the current and emerging domestic scene; and finally, draw some conclusions and offer suggestions for action

  13. New developments in food irradiation

    International Nuclear Information System (INIS)

    Molins, R.

    1996-01-01

    Food irradiation technology is rapidly gaining worldwide acceptance as a promising tool to help alleviate some important food security and safety concerns, and to facilitate the international trade in food. Because of the different priorities that these issues receive in various countries, food irradiation is being considered by developing countries as the technology of choice over chemical fumigants in applications related to the reduction of food losses such as the insect disinfestation of stored staple and export commodities and the inhibition of sprouting of bulb and tuber crops. In contrast, the use of irradiation as a 'cold pasteurization' method to improve the hygienic quality and safety of foods is emerging as the primary field of application in developed countries. Moreover, the use of irradiation as an alternative, non-chemical quarantine treatment for fresh fruits, vegetables and other agricultural commodities entering international trade will no doubt benefit exporting as well as importing countries. 4 figs

  14. Performance enhancement of photovoltaic array through string and central based MPPT system under non-uniform irradiance conditions

    International Nuclear Information System (INIS)

    Syafaruddin; Karatepe, Engin; Hiyama, Takashi

    2012-01-01

    Highlights: ► We propose MPPT method for tracking global MPP of PV arrays under non-uniform irradiance conditions. ► We compare the performance of string and central based MPPT. ► Intelligent control method is utilized to identify the global operating voltage in string and central based MPPT system. ► The performance of proposed method is tested on different size of PV. - Abstract: Mismatching losses reduction of photovoltaic (PV) array has been intensively discussed through the increasing penetration of residential and commercial PV systems. Many causes of mismatching losses have been identified and plenty of proposed methods to solve this problem have been recently proposed. This paper deals with reducing method of mismatching losses due to the non-uniform irradiance conditions. It is well-known that a certain number of multiple peaks occur on the power–voltage curve as the number of PV modules in one-string increases under non-uniform operating conditions. Since the conventional control method only drives the operating points of PV system to the local maxima close to open circuit voltage, only small portion of power can be extracted from the PV system. In this study, a radial basis function neural network (RBF-ANN) based intelligent control method is utilized to map the global operating voltage and non-irradiance operating condition in string and central based MPPT systems. The proposed method has been tested on 10 × 3 (2.2 kW), 15 × 3 (2.5 kW) and 20 × 3 (3.3 kW) of series–parallel PV array configuration under random-shaded and continuous-shaded patterns. The proposed method is compared with the ideal case and conventional method through a simple power–voltage curve of PV arrays. The simulation results show that there are significant increases of about 30–60% of the extracted power in one operating condition when the proposed method is able to shift the operating voltage of modules to their optimum voltages.

  15. Experimental approach and micro-mechanical modeling of the mechanical behavior of irradiated zirconium alloys

    International Nuclear Information System (INIS)

    Onimus, F.

    2003-12-01

    Zirconium alloys cladding tubes containing nuclear fuel of the Pressurized Water Reactors constitute the first safety barrier against the dissemination of radioactive elements. Thus, it is essential to predict the mechanical behavior of the material in-reactor conditions. This study aims, on the one hand, to identify and characterize the mechanisms of the plastic deformation of irradiated zirconium alloys and, on the other hand, to propose a micro-mechanical modeling based on these mechanisms. The experimental analysis shows that, for the irradiated material, the plastic deformation occurs by dislocation channeling. For transverse tensile test and internal pressure test this channeling occurs in the basal planes. However, for axial tensile test, the study revealed that the plastic deformation also occurs by channeling but in the prismatic and pyramidal planes. In addition, the study of the macroscopic mechanical behavior, compared to the deformation mechanisms observed by TEM, suggested that the internal stress is higher in the case of irradiated material than in the case of non-irradiated material, because of the very heterogeneous character of the plastic deformation. This analysis led to a coherent interpretation of the mechanical behavior of irradiated materials, in terms of deformation mechanisms. The mechanical behavior of irradiated materials was finally modeled by applying homogenization methods for heterogeneous materials. This model is able to reproduce adequately the mechanical behavior of the irradiated material, in agreement with the TEM observations. (author)

  16. Development of an irradiation system for a small size continuous run multipurpose gamma irradiator

    International Nuclear Information System (INIS)

    Calvo, W.A.P.; Rela, P.R.; Napolitano, C.M.; Kodama, Y.; Omi, N.M.; Costa, F.E. da; Andradee Silva, L.G. de

    2009-01-01

    The Radiation Technology Center from IPEN-CNEN/SP, Brazil, developed a revolutionary design and national technology, a small-sized continuous run and multipurpose industrial gamma irradiator, to be used as a demonstration facility for manufacturers and contract service companies, which need economical and logistical in-house irradiation system alternatives. Also, to be useful for supporting the local scientific community on development of products and process using gamma radiation, assisting the traditional and potential users on process validation, training and qualification of operators and radioprotection officers. The developed technology for this facility consists of a continuous tote box transport system, comprising a single concrete vault, where the automated transport system of products inside and outside of the irradiator utilizes a rotating door, integrated with the shielding, avoiding the traditional maze configuration. Covering 76 m 2 of floor area, the irradiator design is a product overlap sources and the maximum capacity of cobalt-60 wet sources is 37 PBq. The performed qualification program of this multipurpose irradiator was based on AAMI/ISO 11137 standard, which recommends the inclusion of the following elements: installation and process qualification. The initial load of the multipurpose irradiator was 3.4 PBq with 13 cobalt-60 sources model C-188, supplied by MDS Nordion - Canada. For irradiator dose optimization, the source distribution was done using the software Cadgamma developed by IPEN-CNEN/SP. The polymethylmetacrylate (PMMA) dosimeter system, certified by the International Dose Assurance Service (IDAS) of the International Atomic Energy Agency (IAEA) was used for irradiator dose mapping. The economic analysis, performance concerning with dose uniformity and cobalt-60 utilization efficiency were calculated and compared with other commercial gamma irradiators available on the market. (authors)

  17. International experience in conditioning spent fuel elements

    International Nuclear Information System (INIS)

    Ashton, P.

    1991-04-01

    The purpose of this report is to compile and present in a clear form international experience (USA, Canada, Sweden, FRG, UK, Japan, Switzerland) gained to date in conditioning spent fuel elements. The term conditioning is here taken to mean the handling and packaging of spent fuel elements for short- or long-term storage or final disposal. Plants of a varying nature fall within this scope, both in terms of the type of fuel element treated and the plant purpose eg. experimental or production plant. Emphasis is given to plants which bear some similarity to the concept developed in Germany for direct disposal of spent fuel elements. Worldwide, however, relatively few conditioning plants are in existence or have been conceived. Hence additional plants have been included where aspects of the experience gained are also of relevance eg. plants developed for the consolidation of spent fuel elements. (orig./HP) [de

  18. High-vacuum chamber for the irradiation of targets

    International Nuclear Information System (INIS)

    Krimmel, E.; Dullnig, H.

    1975-01-01

    The high vacuum chamber for irradiating targets with X-rays, electron or ion beams is connected to a magazine storage vessel for the targets through a loading duct which can be evacuated. This duct is traversed by a carriage transporting a magazine to the irradiation position. The duct can be closed by a closing valve. Inside the chamber there is a grip attached to a swivel arm which takes a frame with a target from the magazine, or vice versa, and moves it into the irradiation position. This means that the chamber must always be kept at a constant internal pressure. The swiveling shaft for the swivel arm and the transport pinion of the carriage in addition are magnetically coupled to drive shafts located outside the chamber, which obviates the need for any seals. The grip may also deposit the frame on a goniometer, which allows the target to be aligned in the irradiation position. In addition, the measuring probes used to record the amount of reflected radiation are installed in the chamber under electrically insulated conditions relative to the chamber. (DG/RF) [de

  19. Food irradiation for phytosanitary and quarantine treatment

    Science.gov (United States)

    Irradiation at doses less than 1 kGy is an effective phytosanitary measure with minimal adverse effects on the quality of most fresh produce. There are internationally recognized guidelines for the use of irradiation as a phytosanitary measure and for the conduct of trade in irradiated fresh produce...

  20. Assessment of necessary regularity of internal irradiation monitoring on the basis of direct and indirect methods of dosimetry

    International Nuclear Information System (INIS)

    Malykhin, V.M.; Ivanova, N.I.

    1981-01-01

    It is shown that when assessing the necessary periodicity of internal irradiation monitoring, it is required to take account of the nature (rhythm) of radionuclide intake to the organism during the monitoring period, the effective period of radionuclide biological half-life, its activity in the organism, sensitivity of the technique applied and the labour-consumig character of the monitoring method [ru

  1. Currently developing opportunities in food irradiation and modern irradiation facilities

    International Nuclear Information System (INIS)

    Wanke, R.

    1997-01-01

    I. Factor currently influencing advancing opportunities for food irradiation include: heightened incidence and awareness of food borne illnesses and causes. Concerns about ensuring food safety in international as well as domestic trade. Regulatory actions regarding commonly used fumigants/pesticides e.g. Me Br. II. Modern irradiator design: the SteriGenics M ini Cell . A new design for new opportunities. Faster installation of facility. Operationally and space efficient. Provides local o nsite control . Red meat: a currently developing opportunity. (Author)

  2. Irradiated ground beef: sensory and quality changes during storage under various packaging conditions

    International Nuclear Information System (INIS)

    Murano, P.S.; Murano, E.A.; Olson, D.G.

    1998-01-01

    Ground beef patties (irradiated with 2 kGy and nonirradiated) were packaged using oxygen permeable (polyolefin) or oxygen impermeable material (polyethylene). Samples were irradiated in air and stored in air; irradiated under vacuum and stored under vacuum; or irradiated under vacuum and stored in air. Changes in flavor, texture, juiciness or aftertaste were evaluated after either 1 or 7 days storage at -25 degrees C prior to cooking. Irradiated 'Vac/Air' samples were more tender, irradiated 'Vac' samples were more moist, and irradiated 'Air' samples had the least aftertaste. A 3 log10 reduction in total aerobic counts was detected immediately after irradiation. No difference in lipid oxidation was found within the first week of storage, regardless of packaging atmosphere. Shelf life of ground beef patties was extended 55 days at 4 degrees C

  3. Food irradiation

    International Nuclear Information System (INIS)

    Matsuyama, Akira

    1990-01-01

    This paper reviews researches, commentaries, and conference and public records of food irradiation, published mainly during the period 1987-1989, focusing on the current conditions of food irradiation that may pose not only scientific or technologic problems but also political issues or consumerism. Approximately 50 kinds of food, although not enough to fill economic benefit, are now permitted for food irradiation in the world. Consumerism is pointed out as the major factor that precludes the feasibility of food irradiation in the world. In the United States, irradiation is feasible only for spices. Food irradiation has already been feasible in France, Hollands, Belgium, and the Soviet Union; has under consideration in the Great Britain, and has been rejected in the West Germany. Although the feasibility of food irradiation is projected to increase gradually in the future, commercial success or failure depends on the final selection of consumers. In this respect, the role of education and public information are stressed. Meat radicidation and recent progress in the method for detecting irradiated food are referred to. (N.K.) 128 refs

  4. Lesbian, gay, & bisexual older adults: linking internal minority stressors, chronic health conditions, and depression.

    Science.gov (United States)

    Hoy-Ellis, Charles P; Fredriksen-Goldsen, Karen I

    2016-11-01

    This study aims to: (1) test whether the minority stressors disclosure of sexual orientation; and (2) internalized heterosexism are predictive of chronic physical health conditions; and (3) depression; (4) to test direct and indirect relationships between these variables; and (5) whether chronic physical health conditions are further predictive of depression, net of disclosure of sexual orientation and internalized heterosexism. Secondary analysis of national, community-based surveys of 2349 lesbian, gay, and bisexual adults aged 50 and older residing in the US utilizing structural equation modeling. Congruent with minority stress theory, disclosure of sexual orientation is indirectly associated with chronic physical health conditions and depression, mediated by internalized heterosexism with a suppressor effect. Internalized heterosexism is directly associated with chronic physical health conditions and depression, and further indirectly associated with depression mediated by chronic physical health conditions. Finally, chronic physical health conditions have an additional direct relationship with depression, net of other predictor variables. Minority stressors and chronic physical health conditions independently and collectively predict depression, possibly a synergistic effect. Implications for depression among older sexual minority adults are discussed.

  5. Guidelines for acceptance of food irradiation

    International Nuclear Information System (INIS)

    1987-09-01

    The purpose of the meeting was to develop an action plan which can be applied in countries with varying philosophies towards food irradiation, but which would help foster a common international attitude to what is undoubtedly a controversial issue. Basic recommendations were to: Identify target groups which influence policy in regard to food irradiation; Establish a cohesive marketing strategy with flexibility to meet varied national needs; Implement an ongoing communications system designed to reach and inform decision-makers; Work in each country through an information ''chain'' commencing with irradiation processors; Promote to - and through - the food industry as potentially the greatest beneficiaries; Set up an administrative ''Clearing House'' in each country to co-ordinate promotion efforts; Assemble ''Seeding Groups'' who will contact and communicate with other organizations; Aim for common international branding and packaging identification for irradiated foods

  6. Predicting pavement condition index using international roughness index in Washington DC.

    Science.gov (United States)

    2014-09-01

    A number of pavement condition indices are used to conduct pavement management assessments, two of which are the : International Roughness Index (IRI) and Pavement Condition Index (PCI). The IRI is typically measured using specialized : equipment tha...

  7. Dyeing behaviour of gamma irradiated cotton fabric using Lawson dye extracted from henna leaves (Lawsonia inermis)

    International Nuclear Information System (INIS)

    Rehman, Fazal-ur; Adeel, Shahid; Qaiser, Summia; Ahmad Bhatti, Ijaz; Shahid, Muhammad; Zuber, Mohammad

    2012-01-01

    Dyeing behavior of gamma irradiated cotton fabric using Lawson dye extracted from henna leaves has been investigated. Cotton and dye powder are irradiated to different absorbed doses of 2, 4, 6, 8 and 10 kGy using Cs-137 gamma irradiator. The dyeing parameters such as dyeing time, electrolyte (salt) concentration and mordant concentrations using copper and iron as mordants are optimized. Dyeing is performed using un-irradiated and irradiated cotton with dye solutions and their color strength values are evaluated in CIE Lab system using Spectraflash –SF650. Methods suggested by International Standard Organization (ISO) have been employed to investigate the colourfastness properties such as colourfastness to light, washing and rubbing of irradiated dyed fabric. It is found that gamma ray treatment of cotton dyed with extracts of henna leaves has significantly improved the color strength as well as enhanced the rating of fastness properties. - Highlights: ► The optimum absorbed dose obtained for surface modification of cotton (RC) is 8 kGy. ► Irradiation has enhanced antioxidant, anti bacterial and hemolytic activities. ► Optimum dyeing conditions are 60 min dyeing time and 8 g/L salt concentration. ► At optimum conditions, color strength and fastness properties are enhanced.

  8. IFMIF-KEP. International fusion materials irradiation facility key element technology phase report

    International Nuclear Information System (INIS)

    2003-03-01

    The International Fusion Materials Irradiation Facility (IFMIF) is an accelerator-based D-Li neutron source designed to produce an intense neutron field that will simulate the neutron environment of a D-T fusion reactor. IFMIF will provide a neutron flux equivalent to 2 MW/m 2 , 20 dpa/y in Fe, in a volume of 500 cm 3 and will be used in the development and qualification of materials for fusion systems. The design activities of IFMIF are performed under an IEA collaboration which began in 1995. In 2000, a three-year Key Element Technology Phase (KEP) of IFMIF was undertaken to reduce the key technology risk factors. This KEP report describes the results of the three-year KEP activities in the major project areas of accelerator, target, test facilities and design integration. (author)

  9. Safety factors influencing the acceptance of food irradiation technology

    International Nuclear Information System (INIS)

    1989-01-01

    The International Consultative Group on Food Irradiation convened a Task Force Meeting on Public Information of Food Irradiation at the French Commissariat a l'Energie Atomique (CEA), Cadarache from 18 to 21 April 1988. A compilation of scientific papers on subjects of public interest on food irradiation was made by internationally-recognized experts. The report of the meeting and the review papers presented at the meeting are included in this publication. Refs, figs and tabs

  10. 16-rod-bundle: Irradiation in the MZFR and post-irradiation examinations

    International Nuclear Information System (INIS)

    Manzel, R.

    1979-04-01

    In the course of the irradiation of a 16-rod prototype bundle, the basis has been established for the irradiation of experimental fuel assemblies containing full-length PWR fuel rods in standard positions of the MZFR. The prototype bundle was discharged after an irradiation time of 284 full power days and a burnup of 11400 MWd/tU. The overall performance of the prototype bundle was highly satisfactory. Detailed post-irradiation examinations confirmed the good conditions of bundle structures and fuel rods. (orig.) [de

  11. Short-term anoxic conditioning hormesis boosts antioxidant defenses, lowers oxidative damage following irradiation and enhances male sexual performance in the Caribbean fruit fly, Anastrepha suspensa

    Energy Technology Data Exchange (ETDEWEB)

    Lopez-Martinez, Giancarlo; Hahn, Daniel A [Department of Entomology and Nematology, University of Florida, Gainesville, FL (United States)

    2013-01-15

    Most organisms are repeatedly exposed to oxidative stress from multiple sources throughout their lifetimes, potentially affecting all aspects of organismal performance. Here we test whether exposure to a conditioning bout of anoxia early in adulthood induces a hormetic response that confers resistance to oxidative stress and enhances male sexual performance later in life in the Caribbean fruit fly, Anastrepha suspensa. Anoxic conditioning of adults prior to emergence led to an increase in antioxidant capacity driven by mitochondrial superoxide dismutase and glutathione peroxidase. When exposed to gamma irradiation, a strong oxidative stressor, males that received anoxic conditioning had lower lipid and protein oxidative damage at sexual maturity. Anoxia conditioning led to greater male sexual competitiveness compared with unconditioned males when both were irradiated, although there was no effect of anoxia conditioning on mating competitiveness in unirradiated males. Anoxia also led to higher adult emergence rates and greater flight ability in irradiation-stressed flies while preserving steriity. Thus, hormetic treatments that increased antioxidant enzyme activity also improved male performance after irradiation, suggesting that antioxidant enzymes play an important role in mediating the relationship between oxidative stress and sexual selection. Furthermore, our work has important applied implications for the sterile insect technique (SIT), an environmentally friendly method of insect pest control where males are sterilized by irradiation and deployed in the field to disrupt pest populations via mating. We suggest that hormetic treatments specifically designed to enhance antioxidant activity may produce more sexually competitive sterile males, thus improving the efficacy and economy of SIT programs. (author)

  12. Currently developing opportunities in food irradiation and modern irradiation facilities

    Energy Technology Data Exchange (ETDEWEB)

    Wanke, R [Director Business Development. SteriGenics International Inc. 17901 East Warren Avenue No. 4, Detroit, Michigan 48224-1333 (United States)

    1998-12-31

    I. Factor currently influencing advancing opportunities for food irradiation include: heightened incidence and awareness of food borne illnesses and causes. Concerns about ensuring food safety in international as well as domestic trade. Regulatory actions regarding commonly used fumigants/pesticides e.g. Me Br. II. Modern irradiator design: the SteriGenics {sup M}ini Cell{sup .} A new design for new opportunities. Faster installation of facility. Operationally and space efficient. Provides local {sup o}nsite control{sup .} Red meat: a currently developing opportunity. (Author)

  13. Currently developing opportunities in food irradiation and modern irradiation facilities

    Energy Technology Data Exchange (ETDEWEB)

    Wanke, R. [Director Business Development. SteriGenics International Inc. 17901 East Warren Avenue No. 4, Detroit, Michigan 48224-1333 (United States)

    1997-12-31

    I. Factor currently influencing advancing opportunities for food irradiation include: heightened incidence and awareness of food borne illnesses and causes. Concerns about ensuring food safety in international as well as domestic trade. Regulatory actions regarding commonly used fumigants/pesticides e.g. Me Br. II. Modern irradiator design: the SteriGenics {sup M}ini Cell{sup .} A new design for new opportunities. Faster installation of facility. Operationally and space efficient. Provides local {sup o}nsite control{sup .} Red meat: a currently developing opportunity. (Author)

  14. Estimation of irradiation temperature within the irradiation program Rheinsberg

    CERN Document Server

    Stephan, I; Prokert, F; Scholz, A

    2003-01-01

    The temperature monitoring within the irradiation programme Rheinsberg II was performed by diamond powder monitors. The method bases on the effect of temperature on the irradiation-induced increase of the diamond lattice constant. The method is described by a Russian code. In order to determine the irradiation temperature, the lattice constant is measured by means of a X-ray diffractometer after irradiation and subsequent isochronic annealing. The kink of the linearized temperature-lattice constant curves provides a value for the irradiation temperature. It has to be corrected according to the local neutron flux. The results of the lattice constant measurements show strong scatter. Furthermore there is a systematic error. The results of temperature monitoring by diamond powder are not satisfying. The most probable value lays within 255 C and 265 C and is near the value estimated from the thermal condition of the irradiation experiments.

  15. Blood irradiation

    International Nuclear Information System (INIS)

    Chandy, Mammen

    1998-01-01

    Viable lymphocytes are present in blood and cellular blood components used for transfusion. If the patient who receives a blood transfusion is immunocompetent these lymphocytes are destroyed immediately. However if the patient is immunodefficient or immunosuppressed the transfused lymphocytes survive, recognize the recipient as foreign and react producing a devastating and most often fatal syndrome of transfusion graft versus host disease [T-GVHD]. Even immunocompetent individuals can develop T-GVHD if the donor is a first degree relative since like the Trojan horse the transfused lymphocytes escape detection by the recipient's immune system, multiply and attack recipient tissues. T-GVHD can be prevented by irradiating the blood and different centers use doses ranging from 1.5 to 4.5 Gy. All transfusions where the donor is a first degree relative and transfusions to neonates, immunosuppressed patients and bone marrow transplant recipients need to be irradiated. Commercial irradiators specifically designed for irradiation of blood and cellular blood components are available: however they are expensive. India needs to have blood irradiation facilities available in all large tertiary institutions where immunosuppressed patients are treated. The Atomic Energy Commission of India needs to develop a blood irradiator which meets international standards for use in tertiary medical institutions in the country. (author)

  16. Effect of irradiation, active and modified atmosphere packaging, container oxygen barrier and storage conditions on the physicochemical and sensory properties of raw unpeeled almond kernels (Prunus dulcis).

    Science.gov (United States)

    Mexis, Stamatios F; Riganakos, Kyriakos A; Kontominas, Michael G

    2011-03-15

    The present study investigated the effect of irradiation, active and modified atmosphere packaging, and storage conditions on quality retention of raw, whole, unpeeled almonds. Almond kernels were packaged in barrier and high-barrier pouches, under N(2) or with an O(2) absorber and stored either under fluorescent lighting or in the dark at 20 °C for 12 months. Quality parameters monitored were peroxide value, hexanal content, colour, fatty acid composition and volatile compounds. Of the sensory attributes colour, texture, odour and taste were evaluated. Peroxide value and hexanal increased with dose of irradiation and storage time. Irradiation resulted in a decrease of polyunsaturated and monounsaturated fatty acids during storage with a parallel increase of saturated fatty acids. Volatile compounds were not affected by irradiation but increased with storage time indicating enhanced lipid oxidation. Colour parameters of samples remained unaffected immediately after irradiation. For samples packaged under a N(2) , atmosphere L and b values decreased during storage with a parallel increase of value a resulting to gradual product darkening especially in irradiated samples. Non-irradiated almonds retained acceptable quality for ca. 12 months stored at 20 °C with the O(2) absorber irrespective of lighting conditions and packaging material oxygen barrier. The respective shelf life for samples irradiated at 1.0 kGy was 12 months packaged in PET-SiOx//LDPE irrespective of lighting conditions and 12 months for samples irradiated at 3 kGy packaged in PET-SiOx//LDPE stored in the dark. Copyright © 2010 Society of Chemical Industry.

  17. The Text of an Agreement for Collaboration in an International Programme on Irradiation of Fruit and Fruit Juices

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1965-08-12

    The text of the Agreement between the Agency, the Osterreichische Studiengesellschaft fuer Atomenergie GmbH and the Organisation for Economic Co-operation and Development for Collaboration in an International Programme on Irradiation of Fruit and Fruit Juices, which was signed on 16 September 1964 and entered into force on 1 January 1965, is reproduced in this document for the information of all Members of the Agency,.

  18. The Text of an Agreement for Collaboration in an International Programme on Irradiation of Fruit and Fruit Juices

    International Nuclear Information System (INIS)

    1965-01-01

    The text of the Agreement between the Agency, the Osterreichische Studiengesellschaft fuer Atomenergie GmbH and the Organisation for Economic Co-operation and Development for Collaboration in an International Programme on Irradiation of Fruit and Fruit Juices, which was signed on 16 September 1964 and entered into force on 1 January 1965, is reproduced in this document for the information of all Members of the Agency,

  19. Stress corrosion cracking of irradiated stainless steels in primary water: experimental studies and model development in the FP7 PERFECT IP

    International Nuclear Information System (INIS)

    Van Dyck, S.

    2009-01-01

    The long term behaviour of the internal structures, surrounding the core of nuclear reactors, is a concern within the general framework of plant life management. Due to their positioning in the reactor, the internal structures of a pressurised water reactor (PWR) receive a high neutron irradiation dose during their exposure to the primary environment. The irradiation induced changes in the material and environment may cause or accelerate stress corrosion cracking of stainless steel internals, otherwise insensitive to stress corrosion in primary environment. This phenomenon of irradiation assisted stress corrosion cracking (IASCC) is currently not well quantified. At this stage, the understanding of the underlying mechanisms of IASCC is qualitative at best and no systematic database and descriptive model are available for IASCC in PWR conditions. Since 2004, a concerted European effort is ongoing within the framework 7 PERFECT integrated project to investigate and model IASCC

  20. Development of an irradiation system for a small size continuous run multipurpose gamma irradiator

    International Nuclear Information System (INIS)

    Calvo, Wilson Aparecido Parejo

    2005-01-01

    The Radiation Technology Center from Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), Brazil, developed with a revolutionary design and national technology, a small size continuous run and multipurpose industrial gamma irradiator, to be used as a demonstration facility for manufacturers and contract service companies, which need economical and logistical in-house irradiation system alternatives. Also, to be useful for supporting the local scientific community on development of products and process using gamma radiation, assisting the traditional and potential users on process validation, training and qualification of operators and radioprotection officers. The developed technology for this facility consists of continuous tote box transport system, comprising a single concrete vault, where the automated transport system of products inside and outside of the irradiator utilizes a rotate door, integrated with the shielding, avoiding the traditional maze configuration. Covering 76 m 2 of floor area, the irradiator design is product overlap sources and the maximum capacity of cobalt-60 wet sources is 37 P Bq (1 MCi). The performed quantification program of this multipurpose irradiator was based on AAMI/ISO 11137 standard, which recommends the inclusion of the following elements: installation and process quantification. The initial load of the multipurpose irradiator was 3.4 P Bq (92.1 k Ci) with 13 cobalt-60 sources model C-188, supplied by MDS Nordion Ion Technologies - Canada. For irradiator dose optimization, the source distribution was done using the software Cadgamma developed by IPEN-CNEN/SP. The poly-methylmethacrylate (PMMA) dosimeters system, certified by the International Dose Assurance Service (IDAS) of the International Atomic Energy Agency (IAEA) was used for irradiator dose mapping. The economic analysis, performance concerning to dose uniformity and cobalt-60 utilization efficiency were calculated and compared with other commercial gamma

  1. The return of food irradiation

    International Nuclear Information System (INIS)

    Hammerton, K.

    1992-01-01

    In discussing the need for food irradiation the author examines the problems that arise in processing foods of different kinds: spices, meat, fruits and vegetables. It is demonstrated that the relatively low dose of radiation required to eliminate the reproductive capacity of the pest can be tolerated by most fruits and vegetables without damage. Moreover the safety of irradiated food is acknowledged by major national and international food organizations and committees. The author agreed that when food irradiation has been approved by a country, consumers should be able to choose between irradiated and non-irradiated food. To enable the choice, clear and unambiguous labelling must be enforced. 13 refs., 1 tab., ills

  2. An overview of food irradiation

    International Nuclear Information System (INIS)

    Stevenson, M.H.

    1991-01-01

    This outline survey reviews the subject of food irradiation under the following headings:- brief history, the process (sources, main features of a food processing facility, interaction of radiation with food, main applications of the technology, packaging) consumer concerns (safety, nutritional changes, labelling, detection), international use of food irradiation and legal aspects. (UK)

  3. Statistical optimization of ultraviolet irradiate conditions for vitamin D₂ synthesis in oyster mushrooms (Pleurotus ostreatus using response surface methodology.

    Directory of Open Access Journals (Sweden)

    Wei-Jie Wu

    Full Text Available Response surface methodology (RSM was used to determine the optimum vitamin D2 synthesis conditions in oyster mushrooms (Pleurotus ostreatus. Ultraviolet B (UV-B was selected as the most efficient irradiation source for the preliminary experiment, in addition to the levels of three independent variables, which included ambient temperature (25-45°C, exposure time (40-120 min, and irradiation intensity (0.6-1.2 W/m2. The statistical analysis indicated that, for the range which was studied, irradiation intensity was the most critical factor that affected vitamin D2 synthesis in oyster mushrooms. Under optimal conditions (ambient temperature of 28.16°C, UV-B intensity of 1.14 W/m2, and exposure time of 94.28 min, the experimental vitamin D2 content of 239.67 µg/g (dry weight was in very good agreement with the predicted value of 245.49 µg/g, which verified the practicability of this strategy. Compared to fresh mushrooms, the lyophilized mushroom powder can synthesize remarkably higher level of vitamin D2 (498.10 µg/g within much shorter UV-B exposure time (10 min, and thus should receive attention from the food processing industry.

  4. A computer program to calculate nuclide yields in complex decay chain for selection of optimum irradiation and cooling condition

    International Nuclear Information System (INIS)

    Takeda, Tsuneo

    1977-11-01

    This report is prepared as a user's input manual for a computer code CODAC-No.5 and provides a general description of the code and instructions for its use. The code represents a modified version of the CODAC-No.4 code. The code developed is capable of calculating radioactive nuclide yields in an any given complex decay and activation chain independent of irradiation history. In this code, eighteen kinds of valuable tables and graphs can be prepared for output. They are available for selection of optimum irradiation and cooling conditions and for other intentions in accordance with irradiation and cooling. For a example, the ratio of a nuclide yield to total nuclide yield depending on irradiation and cooling times is obtained. In these outputs, several kinds of complex and intricate equations and others are included. This code has almost the same input forms as that of CODAC-No.4 code excepting input of irradiation history data. Input method and formats used for this code are very simple for any kinds of nuclear data. List of FORTRAN statements, examples of input data and output results and list of input parameters and its definitions are given in this report. (auth.)

  5. Summary report of consultants' meeting on IAEA international database on irradiated nuclear graphite properties

    International Nuclear Information System (INIS)

    Humbert, D.; Wickham, A.J.

    2007-06-01

    The '9th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties' was held on 26-27 March 2007 at the IAEA Headquarters, Vienna, Austria. All discussions, recommendations and actions of this Consultants' Meeting are recorded in this report. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database and make recommendations for actions for the next year. This report contains the current status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  6. Terminal load response law of coaxial cable to continuous wave electromagnetic irradiation

    International Nuclear Information System (INIS)

    Pan Xiaodong; Wei Guanghui; Li Xinfeng; Lu Xinfu

    2012-01-01

    In order to study the coupling response law of continuous wave electromagnetic irradiation to coaxial cable, the typical RF coaxial cable is selected as the object under test. The equipment or subsystem connected by coaxial cable is equivalent to a lumped load. Continuous wave irradiation effect experiments under different conditions are carried out to analyze the terminal load response law of coaxial cable. The results indicate that the coaxial cable has a frequency selecting characteristic under electromagnetic irradiation, and the terminal load response voltage peak appears at a series of discrete frequency points where the test cable's relative lengths equal to semi-integers. When the coaxial cable is irradiated by continuous wave, the induced sheath current converts to the differential-mode induced voltage between inner conductor and shielding layer through transfer impedance, and the internal resistance of induced voltage source is the characteristic impedance of the coaxial cable. The change in terminal load value has no influence on the response curve. The voltages on the terminal load and the internal resistance of equivalent induced voltage source obey the principle of voltage division. Moreover, when the sheath current on the coaxial cable is in resonance, the distributed induced voltage between adjacent current nodes is in the same polarity, which can be equivalent to a single induced voltage source. The induced voltage source which is adjacent to the terminal load plays the leading role in the irradiation response process. (authors)

  7. Hazard evaluation of The International Fusion Materials Irradiation Facility

    Energy Technology Data Exchange (ETDEWEB)

    Burgazzi, Luciano [ENEA-Centro Ricerche ' Ezio Clementel' , Advanced Physics Technology Division, Via Martiri di Monte Sole, 4, 40129 Bologna (Italy)]. E-mail: burgazzi@bologna.enea.it

    2005-01-15

    The International Fusion Materials Irradiation Facility (IFMIF) is aimed to provide an intense neutron source by a high current deuteron linear accelerator and a high-speed lithium flow target, for testing candidate materials for fusion. Liquid lithium is being circulated through a loop and is kept at a temperature above its freezing point. In the frame of the design phase called Key Element technology Phase (KEP), jointly performed by an international team to verify the most important risk factors, safety assessment of the whole plant has been required in order to identify the hazards associated with the plant operation. This paper discusses the safety assessments that were performed and their outcome: Failure Mode and Effect Analysis (FMEA) approach has been adopted in order to accomplish the task. Main conclusions of the study is that, on account of the safety and preventive measures adopted, potential plant related hazards are confined within the IFMIF security boundaries and great care must be exercised to protect workers and site personnel from operating the plant. The analysis has provided as a result a set of Postulated Initiating Events (PIEs), that is off-normal events, that could result in hazardous consequences for the plant, together with the total frequency and the list of component failures which could induce the PIE: this assures the exhaustive list of major initiating events of accident sequences, helpful to the further accident sequence analysis phase. Finally, for each one of the individuated PIEs, the evaluation of the accident evolution, in terms of effects on the plant and relative countermeasures, has allowed to verify that adequate measures are being taken both to prevent the accident occurrence and to cope with the accident consequences, thus assuring the fulfilment of the safety requirements.

  8. French analytic experiment on the high specific burnup of PWR fuels in normal conditions

    International Nuclear Information System (INIS)

    Bruet, M.; Atabek, R.; Houdaille, B.; Baron, D.

    1982-04-01

    Hydrostatic density determinations made on UO 2 pellets of different kinds irradiated in conditions representative of PWR conditions enable the internal swelling rate of the UO 2 to be ascertained. A mean value of 0.8% per 10 4 MWdt -1 (u) up to a specific burnup of 45000 MWdt -1 (u) may be deduced from this experimental basis. These results agree well with those obtained in the TANGO experiments in which UO 2 balls were irradiated in quasi isothermal conditions and without stress. Further, the open porosity of oxide closes progressively and the change in the total porosity is thus very limited (under 1% at 45000 MWdt -1 (u)). With respect to the swelling of the pellets the rise in the specific burnup would not appear therefore to be a problem. The behaviour of recrystallized zircaloy 4 claddings remains satisfactory with respect to creep and growth during irradiation [fr

  9. Neutronic Modelling in Support of the Irradiation Programmes

    International Nuclear Information System (INIS)

    Koonen, E.

    2005-01-01

    Irradiation experiments are generally conducted to determine some specific characteristics of the concerned fuels and structural materials under well defined irradiation conditions. For the determination of the latter the BR2 division has an autonomous reactor physics cell and has implemented the required computational tools. The major tool used is a three-dimensional full-scale Monte Carlo model of the BR2 reactor developed under MCNP-4C for the simulation of irradiation conditions. The objectives of work performed by SCK-CEN are to evaluate and adjust irradiation conditions by adjustments of the environment, differential rod positions, axial and azimuthal positioning of the samples, global power level, ...; to deliver reliable, well defined irradiation condition and fluence data during and after irradiation; to assist the designer of new irradiation devices by simulations and neutronic optimisations of design options; to provide computational support to related projects as a way to valorise the capabilities that the BR2 reactor can offer

  10. The effect of environmental conditions on viability of irradiated codling moth Cydia Pomonella (L.) adults

    International Nuclear Information System (INIS)

    Mohamad, F.; Mansour, M.

    2001-12-01

    Cooled (4 ± 2 Centigrade) codling moth, Cydia pomonella (L.) males exposed to dose of 350 Gy were released in apple orchards starting at 6:00 o'clock in the morning until 4:00 in the afternoon at 2 h. intervals. Moths were released in shade (under trees) or in the sun (between trees), the number of dead moths after 20 minutes of release were recorded, percentage mortality was calculated and compared with unirradiated controls. The effect of ambient temperature and relative humidity on moth survival and activity was evaluated by counting the number of caught males by pheromone traps. Results showed that percentage mortality increased with increase in temperature and decrease in relative humidity and reached to 82% at 30 Centigrade and 40% Rh., when irradiated moths were released under direct sun shine. However, when moths were released in the shade under the same conditions, survival rate was as high as 91%. Results also showed that percentage survival in irradiated males was less than in the control when moths were released under direct sunshine. Results of monitoring moth activity also showed that pheromone trap continued to catch males for up to 8 days which may suggests that released males lived under field conditions for no less than one week. (author)

  11. Effect of neutron irradiation and post-irradiation annealing on microstructure and mechanical properties of OFHC-copper

    International Nuclear Information System (INIS)

    Singh, B.N.; Edwards, D.J.; Toft, P.

    2001-01-01

    Specimens of oxygen-free high conductivity (OFHC) copper were irradiated in the DR-3 reactor at Risoe at 100 deg. C to doses in the range 0.01-0.3 dpa (NRT). Some of the specimens were tensile tested in the as-irradiated condition at 100 deg. C whereas others were given a post-irradiation annealing treatment at 300 deg. C for 50 h and subsequently tested at 100 deg. C. The microstructure of specimens was characterized in the as-irradiated as well as irradiated and annealed conditions both before and after tensile deformation. While the interstitial loop microstructure coarsens with irradiation dose, no significant changes were observed in the population of stacking fault tetrahedra (SFT). The post-irradiation annealing leads to only a partial recovery and the level of recovery depends on the irradiation dose level. However, the post-irradiation annealing eliminates the yield drop and reinstates enough uniform elongation to render the material useful again. These results are discussed in terms of the cascade-induced source hardening (CISH) model

  12. Effect of neutron irradiation and post-irradiation annealing on microstructure and mechanical properties of OFHC-copper

    Energy Technology Data Exchange (ETDEWEB)

    Singh, B.N. E-mail: bachu.singh@risoe.dk; Edwards, D.J.; Toft, P

    2001-12-01

    Specimens of oxygen-free high conductivity (OFHC) copper were irradiated in the DR-3 reactor at Risoe at 100 deg. C to doses in the range 0.01-0.3 dpa (NRT). Some of the specimens were tensile tested in the as-irradiated condition at 100 deg. C whereas others were given a post-irradiation annealing treatment at 300 deg. C for 50 h and subsequently tested at 100 deg. C. The microstructure of specimens was characterized in the as-irradiated as well as irradiated and annealed conditions both before and after tensile deformation. While the interstitial loop microstructure coarsens with irradiation dose, no significant changes were observed in the population of stacking fault tetrahedra (SFT). The post-irradiation annealing leads to only a partial recovery and the level of recovery depends on the irradiation dose level. However, the post-irradiation annealing eliminates the yield drop and reinstates enough uniform elongation to render the material useful again. These results are discussed in terms of the cascade-induced source hardening (CISH) model.

  13. Effect of neutron irradiation and post-irradiation annealing on microstructure and mechanical properties of OFHC-copper

    Science.gov (United States)

    Singh, B. N.; Edwards, D. J.; Toft, P.

    2001-12-01

    Specimens of oxygen-free high conductivity (OFHC) copper were irradiated in the DR-3 reactor at Risø at 100 °C to doses in the range 0.01-0.3 dpa (NRT). Some of the specimens were tensile tested in the as-irradiated condition at 100 °C whereas others were given a post-irradiation annealing treatment at 300 °C for 50 h and subsequently tested at 100 °C. The microstructure of specimens was characterized in the as-irradiated as well as irradiated and annealed conditions both before and after tensile deformation. While the interstitial loop microstructure coarsens with irradiation dose, no significant changes were observed in the population of stacking fault tetrahedra (SFT). The post-irradiation annealing leads to only a partial recovery and the level of recovery depends on the irradiation dose level. However, the post-irradiation annealing eliminates the yield drop and reinstates enough uniform elongation to render the material useful again. These results are discussed in terms of the cascade-induced source hardening (CISH) model.

  14. Moessbauer spectroscopy of He irradiated austenitic stainless steel SUS304 at low temperature

    Energy Technology Data Exchange (ETDEWEB)

    Horii, Kiyomasa; Ishibashi, Tetsu; Toriyama, Tamotsu; Wakabayashi, Hidehiko; Iijima, Hiroshi [Musashi Inst. of Tech., Tokyo (Japan); Kawasaki, Katsunori; Hayashi, Nobuyuki; Sakamoto, Isao

    1996-04-01

    SUS 304 austenitic stainless steel causes the magnetic transition at 60 K, and the Young`s modulus lowers. In addition, its composition elements have the large (n,{alpha}) reaction cross section to high energy neutrons, and helium is apt to be generated, and this is a factor that lowers the material strength. In the He-irradiated parts in austenitic stainless steel, the precursory state of martensite transformation should exist, and its effect is considered to be observable by carrying out low temperature Moessbauer spectroscopy. As to the preparation of He-irradiation samples, the SUS 304 foils used and the irradiation conditions are described. The measurement of low temperature Moessbauer spectra for the samples without irradiation and with irradiation is reported. In order to determine the magnetic transition point, the thermal scanning measurement was carried out for the samples without or with irradiation. The martensite transformation was measured by X-ray diffraction and transmission type Moessbauer spectroscopy. In order to observe the state of the sample surfaces, the measurement by internal conversion electron Moessbauer spectroscopy was performed. These results and the temperature dependence of the Moessbauer spectra for the irradiated parts are reported. (K.I.)

  15. Moessbauer spectroscopy of He irradiated austenitic stainless steel SUS304 at low temperature

    International Nuclear Information System (INIS)

    Horii, Kiyomasa; Ishibashi, Tetsu; Toriyama, Tamotsu; Wakabayashi, Hidehiko; Iijima, Hiroshi; Kawasaki, Katsunori; Hayashi, Nobuyuki; Sakamoto, Isao.

    1996-01-01

    SUS 304 austenitic stainless steel causes the magnetic transition at 60 K, and the Young's modulus lowers. In addition, its composition elements have the large (n,α) reaction cross section to high energy neutrons, and helium is apt to be generated, and this is a factor that lowers the material strength. In the He-irradiated parts in austenitic stainless steel, the precursory state of martensite transformation should exist, and its effect is considered to be observable by carrying out low temperature Moessbauer spectroscopy. As to the preparation of He-irradiation samples, the SUS 304 foils used and the irradiation conditions are described. The measurement of low temperature Moessbauer spectra for the samples without irradiation and with irradiation is reported. In order to determine the magnetic transition point, the thermal scanning measurement was carried out for the samples without or with irradiation. The martensite transformation was measured by X-ray diffraction and transmission type Moessbauer spectroscopy. In order to observe the state of the sample surfaces, the measurement by internal conversion electron Moessbauer spectroscopy was performed. These results and the temperature dependence of the Moessbauer spectra for the irradiated parts are reported. (K.I.)

  16. Regulatory inspection of the egyptian gamma irradiator using a proposed inspection checklist

    International Nuclear Information System (INIS)

    Abdel-Ghani, A.H.

    2000-01-01

    Regulatory inspections are one of the most important elements of a regulatory programme. It shall be performed in all areas of the regulatory responsibility and during all phases of siting, design, construction, commissioning, operation, maintenance and decommissioning of an irradiator facility. The egyptian mega gamma irradiator operating since december 1979 has a Co-60 source of about 400 kilo curies and is used mainly for sterilization of medical supplies and pharmaceuticals and for preservation of some food stuffs. The constructor (Nordion international Inc.) recommended an extensive inspection programme. In accordance with the international and national (2.3) regulations as well as the licensing conditions, the competent authority (NCNSRC) shall perform regulatory inspections both announced and unannounced. In order to facilitate the inspection task and to harmonize the inspection reports a checklist for inspection is proposed which can be used also as an inspection report form

  17. Heavy irradiation effects in radiation-resistant optical fibers

    Energy Technology Data Exchange (ETDEWEB)

    Shikama, Tatsuo [Tohoku Univ., Oarai, Ibaraki (Japan). Oarai Branch, Inst. for Materials Research

    1998-07-01

    Development of a system for optical measurements in a nuclear reactor has been progressing to investigate dynamic changes in a material caused by heavy irradiation. In such system, transfer of optical signals to out-pile measuring systems is being attempted by the use of optical fibers. In this report, the characteristics of optical fibers in the heavy irradiation field were summarized. It has been known that amorphous silica might produce radiolysis and structural defects by the exposure to ionizing radiation. The effects of heavy irradiation on molten silica were extremely complicated. A large intensity of visible light absorption occurred from an early time during start-up of the reactor. The absorption range was limited below 700 nm for the radiation associating fast neutron and the absorption was mostly attributed to non-bridging oxygen hole center. The depletion of optical transferring capacity under the radiation might be related to the internal stress. Therefore, it seems desirable to use optical fibers in the conditions without leading too much stress. (M.N.)

  18. Food irradiation: an emerging opportunity for African countries

    International Nuclear Information System (INIS)

    Adu-Gyamfi, A.

    2004-01-01

    Full Text. The paper reviews the use of food irradiation technology and its potential in food processing and international trade for economic development of African countries. Provision of infrastructure along with technical expertise, private sector anticipation, effective collaborative ventures and networking with other countries and international agencies are considered crucial for Africa to harness the potential of food irradiation. (author)

  19. Computational analysis of modern HTGR fuel performance and fission product release during the HFR-EU1 irradiation experiment

    Energy Technology Data Exchange (ETDEWEB)

    Verfondern, Karl, E-mail: k.verfondern@fz-juelich.de [Research Center Jülich, Institute of Energy and Climate Research, 52425 Jülich (Germany); Xhonneux, André, E-mail: xhonneux@lrst.rwth-aachen.de [Research Center Jülich, Institute of Energy and Climate Research, 52425 Jülich (Germany); Nabielek, Heinz, E-mail: heinznabielek@me.com [Research Center Jülich, Monschauerstrasse 61, 52355 Düren (Germany); Allelein, Hans-Josef, E-mail: h.j.allelein@fz-juelich.de [Research Center Jülich, Institute of Energy and Climate Research, 52425 Jülich (Germany); RWTH Aachen, Chair for Reactor Safety and Reactor Technology, 52072 Aachen (Germany)

    2014-07-01

    Highlights: • HFR-EU1 irradiation test demonstrates high quality of HTGR spherical fuel elements. • Irradiation performance is in good agreement with German fuel performance modeling. • International benchmark exercise expected first particle to fail at ∼13–17% FIMA. • EOL silver release is predicted to be in the percentage range. • EOL cesium and strontium are expected to remain at a low level. - Abstract: Various countries engaged in the development and fabrication of modern HTGR fuel have initiated activities of modeling the fuel and fission product release behavior with the aim of predicting the fuel performance under HTGR operating and accident conditions. Verification and validation studies are conducted by code-to-code benchmarking and code-to-experiment comparisons as part of international exercises. The methodology developed in Germany since the 1980s represents valuable and efficient tools to describe fission product release from spherical fuel elements and TRISO fuel performance, respectively, under given conditions. Continued application to new results of irradiation and accident simulation testing demonstrates the appropriateness of the models in terms of a conservative estimation of the source term as part of interactions with HTGR licensing authorities. Within the European irradiation testing program for HTGR fuel and as part of the former EU RAPHAEL project, the HFR-EU1 irradiation experiment explores the potential for high performance of the presently existing German and newly produced Chinese fuel spheres under defined conditions up to high burnups. The fuel irradiation was completed in 2010. Test samples are prepared for further postirradiation examinations (PIE) including heatup simulation testing in the KÜFA-II furnace at the JRC-ITU, Karlsruhe, to be conducted within the on-going ARCHER Project of the European Commission. The paper will describe the application of the German computer models to the HFR-EU1 irradiation test and

  20. IFMIF-KEP. International fusion materials irradiation facility key element technology phase report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-01

    The International Fusion Materials Irradiation Facility (IFMIF) is an accelerator-based D-Li neutron source designed to produce an intense neutron field that will simulate the neutron environment of a D-T fusion reactor. IFMIF will provide a neutron flux equivalent to 2 MW/m{sup 2}, 20 dpa/y in Fe, in a volume of 500 cm{sup 3} and will be used in the development and qualification of materials for fusion systems. The design activities of IFMIF are performed under an IEA collaboration which began in 1995. In 2000, a three-year Key Element Technology Phase (KEP) of IFMIF was undertaken to reduce the key technology risk factors. This KEP report describes the results of the three-year KEP activities in the major project areas of accelerator, target, test facilities and design integration. (author)

  1. Irradiation's potential for preserving food

    International Nuclear Information System (INIS)

    Morrison, R.M.

    1986-01-01

    The first experimental studies on the use of ionizing radiation for the preservation of foods were published over thirty years ago (1, 2) . After a period of high expectations and perhaps exaggerated optimism a series of disappointments occurred in the late '60s .The first company specifically created to operate a food irradiation plant, Newfield Products Inc, ran into financial difficulties and had to close its potato irradiation facility in 1966. The irradiator, designed to process 15,000t of potatoes per month for inhibition of sprouting, was in operation during one season only. In 1968 the US Food an Drug Administration refused approval for radiation-sterilisation of ham and withdrew the approval it had granted in 1963 for irradiated bacon. An International Project on the Irradiation of Fruit and Fruit juices, created in 1965 at Seibersdorf, Austria, with the collaboration or 9 countries, ended with general disappointment after three years. The first commercial grain irradiator, built in the Turkish harbour town of Iskenderun by the International Atomic Energy Agency with funds from the United Nations Development Program, never received the necessary operating licence from the Turkish Government and had to be dismantled in 1968. The US Atomic Energy Commission terminated its financial support to all research programmes on food irradiation in 1970. For a number of years, little chance seemed to remain that the new process would ever be practically used. However, research and development work was continued in a number of laboratories all over the world, and it appears that the temporary setbacks now have been overcome. Growing quantities of irradiated foods are being marketed in several countries and indications are that irradiated foods will eventually be as generally accepted as are frozen, dried or heatsterilised foods

  2. The post-irradiated examination of CANDU type fuel irradiated in the Institute for Nuclear Research TRIGA reactor

    International Nuclear Information System (INIS)

    Tuturici, I.L.; Parvan, M.; Dobrin, R.; Popov, M.; Radulescu, R.; Toma, V.

    1995-01-01

    This post-irradiation examination work has been done under the Research Contract No. 7756/RB, concluded between the International Atomic Energy Agency and the Institute for Nuclear Research. The paper contains a general description of the INR post-irradiation facility and methods and the relevant post-irradiation examination results obtained from an irradiated experimental CANDU type fuel element designed, manufactured and tested by INR in a power ramp test in the 100 kW Pressurised Water Irradiation Loop of the TRIGA 14 MW(th) Reactor. The irradiation experiment consisted in testing an assembly of six fuel elements, designed to reach a bumup of ∼ 200 MWh/kgU, with typical CANDU linear power and ramp rate. (author)

  3. The response of peripheral blood and bone marrow to combined irradiation

    International Nuclear Information System (INIS)

    Yakovleva, N.G.; Zhorno, L.Ya.

    1975-01-01

    Biological effects were examined in rats after X irradiation, oral administration of 90 Sr and 144 Ce as well as combined exposure to X radiation and internal contamination with both radionuclides. Morphological changes of the peripheral blood and the frequency of aberrant mitoses in bone marrow cells were used as criteria. In the case of combined radiation exposure three periods were observed with regard to blood changes. The first period was characterized by changes caused by external irradiation, the second one was a short-term period of normalization, and during the last period additive effects of external and internal irradiation were observed. Considering the changes of the frequency of aberrant mitoses only two periods could be detected according to the effects of external and internal irradiation. It is pointed out that in the case of combined irradiation the acute radiation syndrome caused by external irradiation gradually changes into a chronic stage associated with the long-term retention of radionuclides. (author)

  4. Evaluation of the effect of probe design parameters on ECT signal and development of eddy current probe for irradiated fuel rods

    International Nuclear Information System (INIS)

    Kwank, S. W.; Han, Y. K.; Woo, S. K.; Kim, T. W.; Park, J. Y.; Kim, B. J.; Park, J. Y.

    1999-01-01

    Eddy current test(ECT) is used to inspect not only the failed fuel rods but also peripheral rods during repairing of the failed fuel rods, to detect internal defects in irradiated fuel rods which could not be detected by ultrasonic test and visual test, and to obtain the data for determining the root cause of fuel rod failure. This study evaluates the effect of properties of test article, irradiated fuel rods, on the impedance diagram in order to reduce the difficulty of ECT signal analysis. The optimum eddy current probe design conditions for inspecting the irradiated fuel rods, is estimate by using experimental equations and the probe is manufactured based on the estimated conditions. The performance of developed eddy current probe and the optimum conditions is proved through characteristic comparison experiment with the probe purchased from the foreign vendor

  5. Summary of FAO/IAEA Seminar on Food Irradiation for Developing Countries in Asia and the Pacific

    International Nuclear Information System (INIS)

    1982-01-01

    A summary is presented of papers submitted to the FAO/IAEA Seminar on Food Irradiation for Developing Countries in Asia and the Pacific, held in Tokyo, 9-13 November 1981. Five reviewed papers on the status of national and international programs on food irradiation, and four communications on irradiation of dried fishery products were presented. The moisture content of fishery products typically ranged from 6 to 40% and the salt content from 0 to 11%. Six papers were presented on the preservation of root crops. Four papers dealt with hygienic conditions of spices and meat products. Five papers were presented on insect disinfestation of fruits and four papers were presented in the session on the commercial use of food irradiation. The round table discussion is summed up and adopted recommendations listed

  6. Educative campaign about information on irradiated foods

    International Nuclear Information System (INIS)

    Luna C, P.C.

    1991-07-01

    The irradiation of foods is accepted by international agencies (FAO, OMS) like a healthy and effective technology at the moment the irradiated foods are marketed easily in many countries, however in other countries exist several factors that affect the practical application of this process. In this work is planned about an educational campaign about the irradiation process directed to the consumers. (Author)

  7. Targeted bone marrow irradiation in the conditioning of high-risk leukaemia prior to stem cell transplantation

    International Nuclear Information System (INIS)

    Reske, S.N.; Buchmann, I.; Seitz, U.; Glatting, G.; Neumaier, B.; Kotzerke, J.; Buck, A.; Martin, H.; Bergmann, L.

    2001-01-01

    Disease recurrence following stem cell transplantation (SCT) remains a major problem. Despite the sensitivity of leukaemias to chemotherapy and irradiation, conventional conditioning before SCT is limited by significant organ toxicity. Targeted irradiation of bone marrow and spleen by radioimmunotherapy may provide considerable dose escalation, with limited toxicity to non-target organs. In this study, 27 patients with high-risk or relapsing leukaemia were treated with rhenium-188-labelled CD66a,b,c,e radioimmunoconjugates ( 188 Re-mAb) specific for normal bone marrow in addition to conventional conditioning with high-dose chemotherapy and 12 Gy total body irradiation prior to SCT. A mean activity of 10.2±2.1 (range 6.9-15.8) GBq 188 Re-mAb was administered intravenously. Acute side-effects were assessed according to the CTC classification and patient outcome was determined. Mean radiation doses (Gy; range in parentheses) to relevant organs and whole body were as follows: 13.1 (6.5-22) to bone marrow, 11.6 (1.7-31.1) to spleen, 5.0 (2.0-11.7) to liver, 7.0 (2.3-11.6) to kidneys, 0.7 (0.3-1.3) to lungs and 1.4 (0.8-2.1) to the whole body. Stem cells engrafted in all patients within 9-18 days post SCT. Acute organ toxicity of grade II or less was observed. During follow-up for 25.4±5.3 (range 18-34) months, 4/27 (15%) patients died from relapse, and 9/27 (33%) from transplantation-related complications. Fourteen patients (52%) are still alive and in ongoing complete clinical remission. Radioimmunotherapy with the bone marrow-seeking 188 Re-labelled CD66 mAb can double the dose to bone marrow and spleen without undue extramedullary acute organ toxicity, when given in addition to high-dose chemotherapy and 12 Gy TBI before allogeneic SCT. This intensified conditioning regimen may reduce the relapse rate of high-risk leukaemia. (orig.)

  8. IFMIF, a fusion relevant neutron source for material irradiation current status

    International Nuclear Information System (INIS)

    Knaster, J.; Chel, S.; Fischer, U.; Groeschel, F.; Heidinger, R.; Ibarra, A.; Micciche, G.; Möslang, A.; Sugimoto, M.; Wakai, E.

    2014-01-01

    The d-Li based International Fusion Materials Irradiation Facility (IFMIF) will provide a high neutron intensity neutron source with a suitable neutron spectrum to fulfil the requirements for testing and qualifying fusion materials under fusion reactor relevant irradiation conditions. The IFMIF project, presently in its Engineering Validation and Engineering Design Activities (EVEDA) phase under the Broader Approach (BA) Agreement between Japan Government and EURATOM, aims at the construction and testing of the most challenging facility sub-systems, such as the first accelerator stage, the Li target and loop, and irradiation test modules, as well as the design of the entire facility, thus to be ready for the IFMIF construction with a clear understanding of schedule and cost at the termination of the BA mid-2017. The paper reviews the IFMIF facility and its principles, and reports on the status of the EVEDA activities and achievements

  9. Localizing by autoradiography at -195 deg radioactive areas in rats exposed to a high flux of thermal neutrons, importance of phosphorus 32 in consecutive internal irradiation; Localisation par autoradiographie a -195 deg des zones radioactives chez le rat expose a un haut flux de neutrons thermiques, importance du phosphore 32 dans l'irradiation interne consecutive

    Energy Technology Data Exchange (ETDEWEB)

    Chanteur, J; Pellerin, P [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1961-07-01

    Rats weighing 25 g were exposed for 5 mn to a flux of 6.10{sup 12} thermal neutrons/cm{sup 2}/s. Anatomical autoradiography at -195 deg. C has enabled the radioactive organs to be easily localised, to follow in course of time the decrease of radioactivity, and from it to deduce the probable nature of the numerous emitters in question. In particular, the phosphorus 32 has thus appeared to be one of those responsible for internal irradiation, general, on the one hand, by activating cellular phosphorus, local, on the other, by activating bony phosphates. Owing to this, an accidental irradiation by neutrons might have consequences that are both somatic (elective irradiation of the bone marrow) and genetic (activation of nucleic acids). The gamma spectrometry has confirmed the nature of certain other emitters. (author) [French] Des rats de 25 g ont ete exposes pendant 5 mn a un flux de 6.10{sup 12} neutrons thermiques/cm{sup 2}/s. L'autoradiographie anatomique a -195 deg. C a permis de localiser facilement les organes radioactifs, de suivre dans le temps la decroissance de la radioactivite, et d'en deduire la nature probable des nombreux emetteurs en cause. En particulier, le phosphore 32 est ainsi apparu comme l'un des responsables de l'irradiation interne, d'une part generale par activation du phosphore cellulaire, d'autre part locale par activation des phosphates osseux. Une irradiations accidentelle par neutrons aurait, de ce fait, des consequences a la fois somatiques (irradiation elective de la moelle osseuse) et genetiques (activation des acides nucleiques). La spectrometrie gamma a confirme la nature de certains autres emetteurs. (auteur)

  10. Behaviour of high purity UO2/H2O interfaces under helium beam irradiation in deaerated conditions

    International Nuclear Information System (INIS)

    Mendes, E.

    2005-11-01

    A question put within the framework of the nuclear fuel storage worn in geological site is what become to them in the presence of water. The aim of a fundamental program, of PRECCI project (ECA), is to highlight the behaviour of interfaces which can be used as models for the interfaces nuclear spent fuel/water if the fuel is uranium UO 2 dioxide. This doctorate is interested in the effect of the alpha activity which is the only one that exist in the spent fuel after long periods. The aim is to identify the mechanisms of alteration and of leaching of surfaces under alpha irradiation. A method is developed to irradiate UO 2 /H 2 O interfaces in deaerated conditions with the beam of He 2+ produced by a cyclotron. The He 2+ ions cross an UO 2 disc and emerge in water with an energy of 5 MeV. Leachings under irradiation are carried with a large range of particles flux. The post-irradiation characterization of the surface of the discs realised by micro-Raman spectroscopy allowed to identify the alteration layer. It is made up of studtite UO 2 (O 2 ),4H 2 O, and of schoepite UO 3 ,xH 2 O. The analysis of the solutions shows that the uranium release strongly increases. The electrochemical properties of the interfaces under irradiation strongly differ from those before irradiation. This work allows to propose that the radiolytic species seen by the interface are it during the heterogeneous phase of evolution of the traces and are species of short lives. Modeling show that the radiolytic radicals species can migrate toward the interface and react with the UO 2 surface. (author)

  11. Legal, administrative and psychological barriers to the industrial application of food irradiation and the trade in irradiated food

    International Nuclear Information System (INIS)

    Cornelis, J.C.

    1978-01-01

    As a result of the recent evaluations of a joint FAO/IAEA/WHO Expert Committee almost all scientific hesitations against the use of irradiation for the preservation of food have been removed. This opens wide perspectives for the augmentation of the quantity of food available for consumption. This also offers great possibilities for less-developed countries with an agricultural economy to export products to the developed countries. Two obstacles to the internationalization of trade in irradiated food remain, however. Only if these last obstacles are removed will food irradiation be able to play an important role. The first obstacle is that no simple test exists to determine whether a food item has been irradiated and with what dose. The second obstacle is the public acceptance of irradiated food, as the public is highly sensitive to imagined or real dangers associated with the word radiation. Ways are suggested for overcoming both obstacles, stressing the importance of international cooperation and international organizations such as the IAEA, FAO and WHO. (author)

  12. Water corrosion of F82H-modified in simulated irradiation conditions by heat treatment

    International Nuclear Information System (INIS)

    Lapena, J.; Blazquez, F.

    2000-01-01

    This paper presents results of testing carried out on F82H in water at 260 deg. C with 2 ppm H 2 and the addition of 0.27 ppm Li in the form of LiOH. Uniform corrosion tests have been carried out on as-received material and on specimens from welded material [TIG and electron beam (EB)]. Stress corrosion cracking (SCC) tests have been carried out in as-received material and in material heat treated to simulate neutron irradiation hardening (1075 deg. C/30' a.c. and 1040 deg. C/30' + 625 deg. C/1 h a.c.) with hardness values of 405 and 270 HV30, respectively. Results for uniform corrosion after 2573 h of testing have shown weight losses of about 60 mg/dm 2 . Compact tension (CT) specimens from the as-received material tested under constant load have not experienced crack growth. However, in the simulated irradiation conditions for a stress intensity factor between 40 and 80 MPa√m, crack growth rates of about 7x10 -8 m/s have been measured

  13. Mediators for internalizing problems in adolescents of parents with chronic medical condition

    NARCIS (Netherlands)

    Sieh, D.S.; Oort, F.J.; Visser-Meily, J.M.A.; Meijer, A.M.

    2014-01-01

    Parents’ chronic medical condition (CMC) is related to internalizing problem behavior in adolescents. Following the transactional stress and coping (TSC) model of Hocking and Lochman, our study examines whether the effect of illness and demographic parameters on the child’s internalizing problems is

  14. Effect of electron irradiation in hatching eggs experimentally inoculated with salmonella enteriditis, on hatch ability and broiler performance

    International Nuclear Information System (INIS)

    Castaneda S, M.P.

    1995-01-01

    The effect of four doses of electrons irradaition on bacteriologic population in hatching egg following experimental shell contamination with Salmonella enteriditis phage type 13 was investigated. Fresh, whole, intact raw eggs were inoculated with 10 9 Colony-Forming Units of Salmonella enteriditis, eggs were irradiated with a beam electron source at either: 0.5, 1, 2 and 3 KGy. The bacteriologic evaluation was made with Gentry's and Williams' technic. After the irradiation the groups were taken to commercial hatchery and were incubated in satndards conditions. The bacteriologic evaluation of the shell showed a significant 2.8 log reduction on the group of eggs that were irradiated with 1 KGy as compared with 0.5 KGy doses group and control group (P<0.05). A negative correlation (r=-0.93) between irradiation doses and CFU (P<0.05) was also observed. Bacteriologic evaluation of the internal shell membrane exhibited a highly significant inactivation (P<0.01) of S. enteriditis of 100% in the group of eggs irradiated at 2 and 3 kGy. A high negative correlation (r=-0.90) between irradiation doses and samples of internal structures (P<0.05) was observed. The results obtained suggested that the electrons irradiation may be use like a control system of salmonelosis on egg and like desinfection system on hatching eggs because it did not cause any effect on hatchability and broiler performance. (Author)

  15. Intense neutron irradiation facility for fusion reactor materials

    Energy Technology Data Exchange (ETDEWEB)

    Noda, Kenji; Oyama, Yukio; Kato, Yoshio; Sugimoto, Masayoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-03-01

    Technical R and D of d-Li stripping type neutron irradiation facilities for development of fusion reactor materials was carried out in Fusion Materials Irradiation Test Facility (FMIT) project and Energy Selective Neutron Irradiation Test Facility (ESNIT) program. Conceptual design activity (CDA) of International Fusion Materials Irradiation Facility (IFMIF), of which concept is an advanced version of FMIT and ESNIT concepts, are being performed. Progress of users` requirements and characteristics of irradiation fields in such neutron irradiation facilities, and outline of baseline conceptual design of IFMIF were described. (author)

  16. Microstructure and mechanical properties of neutron irradiated OFHC-copper before and after post-irradiation annealing

    International Nuclear Information System (INIS)

    Singh, B.N.; Edwards, D.J.; Toft, P.

    2001-02-01

    Tensile specimens of OFHC-copper were irradiated with fission neutrons in the DR-3 reactor at Risoe National Laboratory at 100 deg. C to different displacement dose levels in the range of 0.01 to 0.3 dpa (NRT). Some of the specimens were tensile tested in the as-irradiated condition at 100 deg. C whereas other were given a post-irradiation annealing at 300 deg. C for 50 h and subsequently tested at 100 deg. C. Transmission electron microscopy was used to characterize the microstructure of specimens in the as-irradiation as well as irradiation and annealed conditions both before and after tensile deformation. The results show that while the interstitial loop microstructure coarsens with irradiation dose, no significant changes are observed in the population of stacking fault tetrahedra. The results also illustrates that the post-irradiation annealing leads to only a partial recovery and that the level of recovery depends on the irradiation dose level. However, the post-irradiation annealing eliminates the problem of yield drop and reinstates enough uniform elongation to render the material useful again. These results are discussed in terms of the cascade induced source hardening (CISH) and the dispersed barrier hardening (DBH) models. Both technological and scientific implications of these results are considered. (au)

  17. An internal-friction study of reactor-pressure-vessel steel embrittlement

    International Nuclear Information System (INIS)

    Ouytsel, K. van; Fabry, A.; Batist, R. de; Schaller, R.

    1997-01-01

    Within an enhanced commercial surveillance strategy, the nuclear-research institute SCK.CEN in Mol, Belgium is investigating, by means of internal friction, the microstructural processes responsible for embrittlement of pressure-vessel steels. The experiments were carried out using a torsion pendulum at the Ecole Polytechnique Federale de Lausanne in Switzerland. Amplitude-independent internal-friction experiments teach us that neutron irradiation induces defects which interact with mobile dislocations. Thermal ageing of JRQ and Doel-IV steel does not cause major embrittlement effects. Amplitude-dependent internal-friction experiments allow us to determine a critical amplitude which corresponds to the yield stress of the material as obtained from static tensile tests. The results also correspond to a three-component model for the yield strength taking into account both hardening and non-hardening embrittlement. Investigations of Doel-I-II weld material in different conditions reveal that embrittlement due to irradiation or thermal ageing can be interpreted in terms of a fine interplay between long- and short-range phenomena. (author)

  18. Postirradiation examination results for the Irradiation Effects Test IE-5

    International Nuclear Information System (INIS)

    Cook, T.F.; Ploger, S.A.; Hobbins, R.R.

    1978-03-01

    The results are presented of the postirradiation examination of four pressurized water reactor type fuel rods which were tested in-pile under a fast power ramp and film boiling operation during Irradiation Effects (IE) Test 5. The major objectives of this test were to evaluate the effects of simulated fission products on fuel rod behavior during a fast power ramp, to determine the effects of high initial internal pressure on a fuel rod during film boiling, and to assess fuel rod property changes that occur during film boiling in a fuel rod with previously irradiated cladding. The overall condition of the rods and changes that occurred in fuel and cladding as a result of the power ramp and film boiling operation, as determined from the postirradiation examination, are reported and analyzed. Effects of the simulated fission products on fuel rod behavior during a power ramp are discussed. The effect of high internal pressure on rod behavior during film boiling is evaluated. Cladding temperatures are estimated at various axial and circumferential locations. Cladding embrittlement by oxidation is also assessed

  19. Ion irradiation damage in ilmenite under cryogenic conditions

    International Nuclear Information System (INIS)

    Mitchell, J.N.; Yu, N.; Devanathan, R.; Sickafus, K.E.; Nastasi, M.A.

    1996-01-01

    A natural single crystal of ilmenite was irradiated at 100 K with 200 keV Ar 2+ . Rutherford backscattering spectroscopy and ion channeling with 2 MeV He + ions were used to monitor damage accumulation in the surface region of the implanted crystal. At an irradiation fluence of 1 x 10 15 Ar 2+ cm -2 , considerable near-surface He + ion dechanneling was observed, to the extent that ion yield from a portion of the aligned crystal spectrum reached the yield level of a random spectrum. This observation suggests that the near-surface region of the crystal was amorphized by the implantation. Cross-sectional transmission electron microscopy and electron diffraction on this sample confirmed the presence of a 150 mm thick amorphous layer. These results are compared to similar investigations on geikielite (MgTiO 3 ) and spinel (MgAl 2 O 4 ) to explore factors that may influence radiation damage response in oxides

  20. Reference manual on the IAEA JRQ correlation monitor steel for irradiation damage studies

    International Nuclear Information System (INIS)

    2001-07-01

    The objective of this report is to provide information on the mechanical properties of the ASTM A533 grade B class 1 steel that was designated as 'JRQ reference steel' and for many years served as a radiation/mechanical property correlation monitor in a number of international and national studies of irradiation embrittlement of reactor pressure vessel steel. This report provides the most comprehensive listing of material test data obtained on the JRQ manufacturing history and material properties in the initial, and as delivered condition during the implementation of two IAEA co-ordinated research projects (CRPs) on behaviour of reactor pressure vessel steels under neutron irradiation

  1. Luminescence detection of irradiated foods

    International Nuclear Information System (INIS)

    Sanderson, D.C.W.

    1990-01-01

    The need for forensic tests to identify irradiated foods has been widely recognised at a time of growing international trade in such products and impending changes in UK and EEC legislation to control the process. This paper outlines the requirements for and of such tests, and discusses recent developments in luminescence approaches aimed at meeting the needs of public analysts, retailers and consumers. Detecting whether or not food has been irradiated, and if so to what dose, is one of the challenges which food irradiation poses to the scientist. (author)

  2. Lethal mutation of internal irradiation brown planthopper (Nilaparvita lugens Stal)

    International Nuclear Information System (INIS)

    Wahid, R.A.

    1988-01-01

    The moulting IVth of BPH nympha were irradiated internally with radiophosphorous 32-P 1 uCi/ml, 10 uCi/ml, 50 uCi/ml, 100 uCi/ml, and 500 uCi/ml concentrations respectivelly. An observation was carried out to determines heredity of hopper sterilities from the mating groups of R male x N female, R male x R female, and N male x R female. The 32-P concentration below of 50 uCi/ml seemed to be the substerile dose, however, the dominant lethal mutation has been visually shown by R male x R female F1 mating group. The hereditary lines of F1, F2, F3, and F4 of the hopper sterilities wich were indicated by the nympha hatch ability have some significant correlations (r1= -0.77, r2= -0.92, r3= -0.93 and r4= -0.85). Thus, the resesif lethal mutations visually showed by F3 and F4 from all of the 100 uCi/ml and 50 uCi/ml treated groups. (author). 10 refs, 2 figs, 2 tabs

  3. Recent world-wide advances in irradiation of food and its identification

    International Nuclear Information System (INIS)

    Uchiyama, Sadao; Saito, Yukio

    1991-01-01

    Irradiation (ionizing radiation) of various foods is growing in popularity internationally. For example, it is used as a substitute for the use of post-harvest pesticides. This trend has served to intensify research on the identification of irradiated foods. The first Research Co-ordinated Meeting on Analytical Detection Method for Irradiated Foods was held in Poland under the sponsorship of FAO/IAEA in 1990 in order to solve problems related to the international trade of irradiated foods and to ensure their correct labelling in the market. In this review, the world-wide advances in the irradiation of food and its identification are introduced and discussed. (author)

  4. Recent progress in food irradiation in Korea

    International Nuclear Information System (INIS)

    Joong-ho Kwon

    1988-01-01

    This paper discusses progress in research into food irradiation and government approval of the process in Korea. The development of the first cobalt-60 food irradiator is described and the role of international, trade and consumer associations in its commercialization discussed. (U.K.)

  5. High-dose irradiation of food

    International Nuclear Information System (INIS)

    Diehl, J.F.

    1999-01-01

    Studies performed on behalf of the International Project on Food Irradiation in the period from 1971 until 1980 resulted in the concluding statement that ''.the irradiation of any food commodity up to an overall average dose of 10 kGy presents no toxicological hazard; hence, toxicological testing of foods so treated is no longer required.'' Since then, licenses for food irradiation have been restricted to this maximum dose in any country applying this technology. Further testing programmes have been carried out investigating the wholesomeness or hazards of high-dose irradiation, but there has been little demand so far by the food industry for licensing of high-dose irradiation, as there is only a small range of products whose irradiation at higher doses offers advantages for given, intended use. These include eg. spices, dried herbs, meat products in flexible pouch packagings for astronauts, or patients with immune deficiencies. (orig./CB) [de

  6. Irradiation creep models - an overview

    International Nuclear Information System (INIS)

    Matthews, J.R.; Finnis, M.W.

    1988-01-01

    The modelling of irradiation creep is now highly developed but many of the basic processes underlying the models are poorly understood. A brief introduction is given to the theory of cascade interactions, point defect clustering and dislocation climb. The range of simple irradiation creep models is reviewed including: preferred nucleation of interstitial loops; preferred absorption of point defects by dislocations favourably orientated to an applied stress; various climb-enhanced glide and recovery mechanisms, and creep driven by internal stresses produced by irradiation growth. A range of special topics is discussed including: cascade effects; creep transients; structural and induced anisotropy; and the effect of impurities. The interplay between swelling and growth with thermal and irradiation creep is emphasized. A discussion is given on how irradiation creep theory should best be developed to assist the interpretation of irradiation creep observations and the requirements of reactor designers. (orig.)

  7. Investigation of food irradiation technology for application to plant quarantine. Working group report of food irradiation technology

    Energy Technology Data Exchange (ETDEWEB)

    Sunaga, Hiromi; Ito, Hitoshi; Takatani, Yasuyuki; Takizawa, Haruki; Yotsumoto, Keiichi; Tanaka, Ryuichi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; Hirano, Tsuyoshi; Tokunaga, Okihiro

    1999-06-01

    The commercialization of food irradiation in Japan was started in 1973 for the sprout inhibition of potatoes as the first successful food irradiation facility in the world. Since approval of potato irradiation, no items has been commercialized in Japan. However, international agreement for phase out of methyl bromide after 2005 and increasing incidences of foodborn diseases such as by Escherichia coli O157:H7 are forcing to have interesting to food irradiation. Takasaki Radiation Chemistry Research Establishment has long experiences on research of irradiation effect and engineering of food irradiation in Japan. From these back ground, working group of food irradiation was organized at August 1997 by some members of Department of Radiation Research for Environment and Resources and Advanced Technology Center for supporting technically on commercialization of food irradiation. This report presents the result of discussion in working group on generalization up to date researches of food irradiation, application fields and items, technical problems and future prospects of this technology in Japan. (author)

  8. Food irradiation: advantages and limitations

    International Nuclear Information System (INIS)

    Hernandes, N.K.; Vital, H. de C.; Sabaa-Srur, A.U.O.

    2003-01-01

    Food irradiation is a physical method of processing food (e.g. freezing, canning). It has been thoroughly researched over the last four decades and is recognized as a safe and wholesome method. It has the potential both of disinfesting dried food to reduce storage losses and disinfesting fruits and vegetables to meet quarantine requirements for export trade. Low doses of irradiation inhibit spoilage losses due to sprouting of root and tuber crops. Food- borne diseases due to contamination by pathogenic microorganisms and parasites of meat, poultry, fish, fishery products and spices are on the increase. Irradiation of these solid foods can decontaminate them of pathogenic organisms and thus provide safe food to the consumer. Irradiation can successfully replace the fumigation treatment of cocoa beans and coffee beans and disinfest dried fish, dates, dried fruits, etc. One of the most important advantages of food irradiation processing is that it is a coldprocess which does not significantly alter physico-chemical characters of the treated product. It can be applied to food after its final packaging. Similar to other physical processes of food processing, (e.g. canning, freezing), irradiation is a capital intensive process. Thus, adequate product volume must be made available in order to maximize the use of the facility and minimize the unit cost of treatment. Lack of harmonization of regulations among the countries which have approved irradiated foods hampers the introduction of this technique for international trade. Action at the international level has to be taken in order to remedy this situation. One of the important limitations of food irradiation processing is its slow acceptance by consumers, due inter alia to a perceived association with radioactivity. The food industry tends to be reluctant to use the technology in view of uncertainties regarding consumer acceptance of treated foods. Several market testing and consumer acceptance studies have been carried

  9. The out-of-pile test for internal pressure measurement of nuclear fuel rod using LVDT

    Energy Technology Data Exchange (ETDEWEB)

    Son, J. M.; Kim, B. K.; Kim, D. S.; Joo, K. N.; Park, S. J.; Kang, Y. H.; Kim, Y. K.; Yeum, K. I. [KAERI, Taejon (Korea, Republic of)

    2002-05-01

    As a part of the development of instrumentation technologies for the nuclear fuel irradiation test in HANARO(High-flux Advanced Nuclear Application Reactor), the internal pressure measurement technique of the nuclear fuel rod is being developed using LVDT(Linear Variable Differential Transformer). The objectives of this test were to understand the LVDT's characteristics and to study its application techniques for fuel irradiation technology. It will be required to analyze the acquired internal pressure of fuel rod during fuel irradiation test in HANARO. Therefore, the out of pile test system for pressure measurement was developed, and the test with the LVDT at room temperature were performed. This test were implemented in 1 kg/cm{sup 2} increment from 1 kg/cm{sup 2} to 30 kg/cm{sup 2}, and repeated 6 times at same condition. The LVDT's sensitivities were obtained by following two ways, the one by test and the other by calculation from characteristics data. These two sensitivities were compared and analyzed. The calculation method for internal pressure of nuclear fuel rod at specified temperature was also established. The results of the out-of-pile test will be used to predict accurately the internal pressure of fuel rod during irradiation test. And, the well qualified out-of-pile tests are needed to understand the LVDT's detail characteristics at high temperature for the detail design of the fuel irradiation capsule.

  10. The out-of-pile test for internal pressure measurement of nuclear fuel rod using LVDT

    Energy Technology Data Exchange (ETDEWEB)

    Min, Sohn Jae; Kang, Y. H.; Kim, B. G. [and others

    2001-11-01

    As a part of the development of instrumentation technologies for the nuclear fuel irradiation test in HANARO, the internal pressure measurement technique of the nuclear fuel rod is being developed using LVDT. The objectives of this test were to understand the LVDT's characteristics and to study its application techniques for fuel irradiation technology. It will be required to analyze the acquired internal pressure of fuel rod during fuel irradiation test in HANARO. The out-of-pile test system for pressure measurement was developed, and the test with the LVDT at room temperature(19 .deg. C) were performed. A out-of-pile test were implemented in 1 kg/cm{sup 2} increment from 1 kg/cm{sup 2} to 30 kg/cm{sup 2} and repeated 6 times at each condition. The LVDT's sensitivities were obtained by following two ways, the one by test and the other by calculation from characteristics data. These two sensitivities were compared and analyzed. The calculation method for internal pressure of nuclear fuel rod at specified temperature was also established. This report describes the system configuration, the out-of-pile test procedures, and the results. The results of the out-of-pile test will be used to predict accurately the internal pressure of fuel rod during irradiation test. And, the well qualified out-of-pile tests are needed to understand the LVDT's detail characteristics for the detail design of the fuel irradiation capsule.

  11. Food irradiation and combination processes

    International Nuclear Information System (INIS)

    Campbell-Platt, G.; Grandison, A.S.

    1990-01-01

    International approval of food irradiation is being given for the use of low and medium doses. Uses are being permitted for different categories of foods with maximum levels being set between 1 and 10 kGy. To maximize the effectiveness of these mild irradiation treatments while minimizing any organoleptic quality changes, combination processes of other technologies with irradiation will be useful. Combinations most likely to be exploited in optimal food processing include the use of heat, low temperature, and modified-atmosphere packaging. Because irradiation does not have a residual effect, the food packaging itself becomes an important component of a successful process. These combination processes provide promising alternatives to the use of chemical preservatives or harsher processing techniques. (author)

  12. Electron irradiation of dry food products

    Energy Technology Data Exchange (ETDEWEB)

    Gruenewald, Th [Bundesbahn-Zentralamt, Minden (Germany, F.R.)

    1983-01-01

    The interest of the industrial food producer is increasing in having the irradiation facility installed in the food processing chain. The throughput of the irradiator should be high and the residence time of the product in the facility should be short. These conditions can be accomplished by electron irradiators. To clarify the irradiation conditions spices taken out of the industrial process, food grade salt, sugar, and gums as models of dry food products were irradiated. With a radiation dose of 10 kGy microbial load can be reduced on 10**4 microorganisms/g. The sensory properties of the spices were not changed in an atypical way. For food grade salt and sugar changes of colour were observed which are due to lattice defects or initiated browning. The irradiation of several gums led only in some cases to an improvement of the thickness properties in the application below 50 deg C, in most cases the thickness effect was reduced. The products were packaged before irradiation. But it would be possible also to irradiate the products without packaging moving the product through the irradiation field in a closed conveyor system.

  13. Electron irradiation of dry food products

    International Nuclear Information System (INIS)

    Gruenewald, Th.

    1983-01-01

    The interest of the industrial food producer is increasing in having the irradiation facility installed in the food processing chain. The throughput of the irradiator should be high and the residence time of the product in the facility should be short. These conditions can be accomplished by electron irradiators. To clarify the irradiation conditions spices taken out of the industrial process, food grade salt, sugar, and gums as models of dry food products were irradiated. With a radiation dose of 10 kGy microbial load can be reduced on 10**4 microorganisms/g. The sensory properties of the spices were not changed in an atypical way. For food grade salt and sugar changes of colour were observed which are due to lattice defects or initiated browning. The irradiation of several gums led only in some cases to an improvement of the thickness properties in the application below 50 deg C, in most cases the thickness effect was reduced. The products were packaged before irradiation. But it would be possible also to irradiate the products without packaging moving the product through the irradiation field in a closed conveyor system. (author)

  14. Food Irradiation Newsletter. V. 11, no. 2

    International Nuclear Information System (INIS)

    1987-09-01

    This issue includes a report of the ICGFI's Workshop on Food Irradiation for Food Control Officials, convened in Budapest, Hungary, May 1987. To provide further assurance on the safety and wholesomeness of irradiated food in general and details about polyploidy (increase in number of chromosomes) resulting from consumption of freshly irradiated wheat in particular, ICGFI Secretariat issued a fact sheet on ''Safety and Wholesomeness of Irradiated Foods: International Status - Facts and Figures'' to its member countries in July 1987. The Newsletter also contains summary reports of two important market testings of irradiated food, i.e. papaya in California in March and strawberries in France in June, which proved that consumers will buy irradiated foods, and status reports on food irradiation in France and Mexico. Ref, 1 tab

  15. Repair-welding technology of irradiated materials - WIM project

    International Nuclear Information System (INIS)

    Nakata, K.; Oishi, M.

    1998-01-01

    A new project on the development of repair-welding technology for core internals and reactor (pressure) vessel, consigned by the Ministry of International Trade and Industry (MITI), has been started from October 1997. The objective of the project is classified into three points as follows: (1) to develop repair-welding techniques for neutron irradiated materials, (2) to prove the availability of the techniques for core internals and reactor (pressure) vessel, and (3) to recommend the updated repair-welding for the Technical Rules and Standards. Total planning, neutron irradiation, preparation of welding equipment are now in progress. The materials are austenitic stainless steels and a low alloy steel. Neutron irradiation is performed using test reactors. In order to suppress the helium aggregation along grain boundaries, low heat input welding techniques, such as laser, low heat input TIG and friction weldings, will be applied. (author)

  16. SILICON CARBIDE GRAIN BOUNDARY DISTRIBUTIONS, IRRADIATION CONDITIONS, AND SILVER RETENTION IN IRRADIATED AGR-1 TRISO FUEL PARTICLES

    Energy Technology Data Exchange (ETDEWEB)

    Lillo, T. M.; Rooyen, I. J.; Aguiar, J. A.

    2016-11-01

    Precession electron diffraction in the transmission electron microscope was used to map grain orientation and ultimately determine grain boundary misorientation angle distributions, relative fractions of grain boundary types (random high angle, low angle or coincident site lattice (CSL)-related boundaries) and the distributions of CSL-related grain boundaries in the SiC layer of irradiated TRISO-coated fuel particles. Two particles from the AGR-1 experiment exhibiting high Ag-110m retention (>80%) were compared to a particle exhibiting low Ag-110m retention (<19%). Irradiated particles with high Ag-110m retention exhibited a lower fraction of random, high angle grain boundaries compared to the low Ag-110m retention particle. An inverse relationship between the random, high angle grain boundary fraction and Ag-110m retention is found and is consistent with grain boundary percolation theory. Also, comparison of the grain boundary distributions with previously reported unirradiated grain boundary distributions, based on SEM-based EBSD for similarly fabricated particles, showed only small differences, i.e. a greater low angle grain boundary fraction in unirradiated SiC. It was, thus, concluded that SiC layers with grain boundary distributions susceptible to Ag-110m release were present prior to irradiation. Finally, irradiation parameters were found to have little effect on the association of fission product precipitates with specific grain boundary types.

  17. Comprehensive method for analyzing the power conversion efficiency of organic solar cells under different spectral irradiances considering both photonic and electrical characteristics

    International Nuclear Information System (INIS)

    Chong, Kok-Keong; Khlyabich, Petr P.; Hong, Kai-Jeat; Reyes-Martinez, Marcos; Rand, Barry P.; Loo, Yueh-Lin

    2016-01-01

    Highlights: • Method to analyze power-conversion efficiency under various solar irradiance. • Power-conversion efficiency at local irradiance is 5.4% higher than AM1.5G. • Diffuse local irradiance has gain of 23.7–27.9% relative to AM1.5G conditions. • Annual average energy density yield is estimated as 31.89 kW h/m 2 in Malaysia. - Abstract: The solar spectral irradiance varies significantly for different locations and time due to latitude, humidity, cosine effect of incident sunlight, etc. For convenience, the power-conversion efficiency of a solar cell is referenced to the international standard of AM1.5G spectral irradiance, which inevitably leads to varying performance of deployed solar cells under the specific local climate and insolation conditions. To predict the actual performance of solar cells under local climate conditions, we propose a methodology to compute the power-conversion efficiency of organic photovoltaic cells based upon indoor measurement with a solar simulator, the measured local solar spectrum, and making use of both optical and electrical factors. From our study, the annual average energy density yield of poly(3-hexylthiophene):phenyl-C 61 -butyric acid methyl ester (P3HT:PCBM) bulk-heterojunction organic solar cells under the local spectral irradiance of Malaysia is estimated to be 31.89 kW h/m 2 and the power-conversion efficiency is increased by 5.4% compared to that measured under AM1.5G conditions. In addition, diffuse solar irradiance (cloudy condition) was found to be in favor of P3HT:PCBM solar cells, with gain of 23.7–27.9% relative to AM1.5G conditions.

  18. Food Irradiation Newsletter. Vol. 15, no. 1

    International Nuclear Information System (INIS)

    1991-05-01

    This Newsletter contains reports of the Final FAO/IAEA Research Coordination Meeting (RCM) on the Latin American Regional Cooperative Programme on Food Irradiation, the first FAO/IAEA RCM of the Research Coordination Programme on Analytical Detection Methods for Irradiation Treatment of Foods, and the final FAO/IAEA RCM on the Use of Irradiation as a Quarantine Treatment of Food and Agriculture Commodities. Also included are excerpts of the Seventh Annual Meeting of the International Consultative Group on Food Irradiation (ICGFI) and a summary of an ICGFI Task Force Meeting on Irradiation as a Quarantine Treatment of Fresh Fruits and Vegetables. The new regulations on food irradiation in the United Kingdom, effective 1 January 1991, are summarized

  19. Irradiated food for immunocompromised people

    International Nuclear Information System (INIS)

    Narvaiz, Patricia

    2005-01-01

    Immune-compromise is a condition in which the natural defenses against diseases are dimished; several situations can be cited as examples, including mis nourishment, pregnancy, young and old age. This enhances the probability of suffering microbial diseases, caused by food borne pathogens. Traditionally, immune-suppressed patients in hospitals were isolated from the environment, being their food sterilized by different treatments, including irradiation. At present the medical opinion differs from this approach due to the costs and specialized requirements, uncertainties about the clinical benefits, and psychological convenience. So, the tendency nowadays seems to move, when the patient's condition allows it, from 'sterile diets' to 'low microbe diets' (or 'clean diets'). At the National Atomic Energy Commission, Argentina, under Coordinated Research Programmes of the Food and Environmental Preservation Section, International Atomic Energy Agency, in which 14 countries participated, treatments at pasteurizing doses were studied to widen the meals availability for vulnerable persons, to include some products usually considered as 'high risk' , but nutritionally or psychologically adequate. In a first experience, nutritionists working at the corresponding Service in a Buenos Aires hospital elaborated diets suitable for patients with different immune-compromise degrees, and advised on the interesting meal types to be studied. In a second experience, advanced nutrition students of the Entre Rios University performed a sensory evaluation in which 44 immune- compromised patients at the Jose de San Martin Clinical School Hospital, Buenos Aires, tasted a whole irradiated lunch composed of meals usually forbidden due to high microbial risk, though highly desired. The patients evaluated this lunch with high scores and showed enthusiastic towards the irradiation treatment. This preservation treatment could not only be useful to supply hospitals but also supermarkets. (author)

  20. Internal friction of Fe-B alloys neutron irradiated at low temperature

    International Nuclear Information System (INIS)

    Kitajima, Kazunori; Futagami, Koji; Abe, Hironobu; Yoshida, Hiroyuki.

    1975-01-01

    Measurements were made on the internal friction of Fe-B alloys irradiated by neutron at 16 0 K to the dose of 3x10 16 nvt (>1 MeV) and 6x10 17 nvt (thermal). Boron was used to enhance the production of defects by the nuclear transformation B 10 (n,α)Li 7 . Relaxation peaks were found in specimens containing dispersed fine precipitates of NbB 2 in range of B 500--7200 wt ppm and Nb 2000--30000 wt ppm. The most prominent peak is the one with the peak temperature of 169 0 K at the frequency of 264 c/sec. Activation energy determined from the peak shift is 0.28+-0.01 eV, which is nearly equal to that of migration of self-interstitial reported on pure iron. However activation energy of the decay of peaks by annealing is about 0.7 eV. Interpretation was presented that the peak may be attributed to re-orientation of self-interstitials loosely bound to a boron atom. (auth.)

  1. Onion irradiation - a case study

    International Nuclear Information System (INIS)

    Huebner, G.

    1988-01-01

    The irradiation of onions (Allium cepa L.) serves to prevent sprouting associated with long-term storage or transport and storage of onions in climatic conditions which stimulate sprouting. JECFI the Joint Expert Committee for Food Irradiation of FAO/IAEA/WHO, recommended the application of an irradiation dose of up to 150 Gy for sprout inhibition with onions. (author)

  2. Present and future of food irradiation in China

    International Nuclear Information System (INIS)

    Chen Hao; Cai Jiming; Pan Pingchuan; Liu Ge

    2006-01-01

    The treatment of foods and agricultural products by irradiation technology in China has become an increasingly accepted practice and has been recognized as a public health intervention measure for controling pathogenic microbes and pests on foods since early 1980s. This paper gives an outline on the history and the current status of food irradiation in China, including the research interest, commercial application, public acceptance, regulations and hygienic standards of irradiated foods, and the irradiation facilities for food irradiation. The newly finished or scheduled irradiation facilities in China up to 2007 are introduced. And problems with the food irradiation studies, especially in analysis of food quality during irradiation, the implementation of GMP and HACCP in the food irradiation production and harmonization of food irradiation regulations with international standards, are also discussed. (authors)

  3. Nutritional and other implications of irradiating meat

    International Nuclear Information System (INIS)

    Stevenson, M.H.

    1994-01-01

    Different methods have been developed to extend the shelf-life of meat and its products ranging from the traditional use of salt to canning, freezing and modified-atmosphere packaging. As well as these more conventional approaches to meat preservation, the use of ionizing radiation has also been extensively studied over many years. The irradiation sources which are permitted for use with food are gamma photons from 6o Co or 137 Cs, high-energy electrons generated by machines, maximum energy 10 MeV and X-rays with a maximum energy of 5 MeV (Codex Alimentarius Commission, 1984). At doses of about 25-50 kGy, irradiation can be used to achieve sterilization and in the 1960s shelf-stable radiation-sterilized meat products were developed to substitute for canned or frozen military rations. Currently, sterile meals are produced for immunocompromized patients using irradiation. With doses below 10 kGy, the process is effective in enhancing food safety through the inactivation of pathogenic microorganisms such as Salmonella and Campylobacter and extending shelf-life by eliminating the micro-organisms responsible for normal spoilage. Following the report of the Food and Agriculture Organization/International Atomic Energy Agency/World Health Organization Joint Expert Committee on the Wholesomeness of Irradiated Food (1981) which concluded that 'irradiation of food up to an overall average dose of 10 kGy produced no toxicological hazard and introduced no special nutritional or microbiological problems', there has been renewed interest in the use of lower doses of irradiation for the preservation of food. In 1991, the UK government introduced new regulations permitting the irradiation of seven categories of food, including chicken, under strictly controlled conditions (UK Government Regulations, 1990) .Currently, thirty-seven countries have approval for the irradiation treatment of a range of foods or food items and of these countries, twenty-six are using the process on a

  4. Present status and subjects of food irradiation in the world

    International Nuclear Information System (INIS)

    Hayashi, Toru

    1995-01-01

    Food irradiation is the technology of irradiating such radiations as gamma ray and electron beam to foods and farm products, and its objectives are the prevention of germination of potatoes and onions, the insecticide of cereals and fruits, the adjustment of the ripeness of fruits and vegetables, the sterilization of chickens and spices and so on. The food irradiation as the technology for preventing the loss of foods, the food irradiation as the substitute for the fumigation with chemicals and the food irradiation for improving food sanitation are discussed. The history of the soundness test of irradiated foods and the opinion of the international organizations are described. The safety evaluation in view of poisonous effect, nutrition and microorganisms is carried out, and the safety of the foods irradiated with the dose less than 10 kGy has been proved. The examples of utilizing food irradiation for sterilization, insecticide and germination prevention are shown. The present status of its practical use in America and Europe and the move of such international organizations as IAEA, FAO and WHO are reported. (K.I.)

  5. Packing for food irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Chmielewski, A G [Institute of Nuclear Chemistry and Technology, Warsaw (Poland)

    2006-07-01

    Joint FAO/IAEA/WHO Expert Committee approved the use of radiation treatment of foods. Nowadays food packaging are mostly made of plastics, natural or synthetic, therefore effect of irradiation on these materials is crucial for packing engineering for food irradiation technology. By selecting the right polymer materials for food packaging it can be ensured that the critical elements of material and product performance are not compromised. When packaging materials are in contact with food at the time of irradiation that regulatory approvals sometimes apply. The review of the R-and-D and technical papers regarding material selection, testing and approval is presented in the report. The most information come from the USA where this subject is well elaborated, the International Atomic Energy Agency (IAEA) reports are reviewed as well. The report can be useful for scientists and food irradiation plants operators. (author)

  6. Packing for food irradiation

    International Nuclear Information System (INIS)

    Chmielewski, A.G.

    2006-01-01

    Joint FAO/IAEA/WHO Expert Committee approved the use of radiation treatment of foods. Nowadays food packaging are mostly made of plastics, natural or synthetic, therefore effect of irradiation on these materials is crucial for packing engineering for food irradiation technology. By selecting the right polymer materials for food packaging it can be ensured that the critical elements of material and product performance are not compromised. When packaging materials are in contact with food at the time of irradiation that regulatory approvals sometimes apply. The review of the R-and-D and technical papers regarding material selection, testing and approval is presented in the report. The most information come from the USA where this subject is well elaborated, the International Atomic Energy Agency (IAEA) reports are reviewed as well. The report can be useful for scientists and food irradiation plants operators. (author)

  7. Detection of irradiated fresh fruits treated by e-beam or gamma rays

    International Nuclear Information System (INIS)

    Marin-Huachaca, N.S.; Lamy-Freund, Maria Tereza; Mancini-Filho, Jorge; Delincee, Henry; Villavicencio, A.L.C.H.

    2002-01-01

    Since about 1990, the amount of commercially irradiated food products available worldwide has increased. Commercial irradiation of foods has been allowed in Brazil since 1973 and now more than 20 different food products are approved. Among these products are a number of fresh fruits which may be irradiated for insect disinfestation, to delay ripening and to extend shelf-life. Today, there is a growing interest to apply radiation for the treatment of fruits instead of using fumigation or e.g. vapour-heat treatments, and an increased international trade in irradiated fruits is expected. To ensure free consumer choice, methods to identify irradiated foods are highly desirable. In this work, three detection methods for irradiated fruits have been employed: DNA Comet Assay, the half-embryo test and ESR. Both electron-beam (e-beam) and gamma rays were applied in order to compare the response with these two different kinds of radiation. Fresh fruits such as oranges, lemons, apples, watermelons and tomatoes were irradiated with doses in the range 0, 0.50, 0.75, 1.0, 2.0 and 4.0 kGy. For analysis, the seeds of the fruits were utilized. Both DNA Comet Assay and the half-embryo test enabled an easy identification of the radiation treatment. However, under our conditions, ESR measurements were not satisfactory

  8. Mechanical behavior of irradiated fuel-pin cladding evaluated under transient heating and pressure conditions

    International Nuclear Information System (INIS)

    Hamilton, M.L.; Johnson, G.D.; Hunter, C.W.; Duncan, D.R.

    1982-11-01

    Fast breeder fuel-pin cladding has been tested under experimental conditions simulating the temperature and pressure history characteristic of anticipated transient events. Irradiation induces severe reductions in both strength and ductility. Ductility losses are independent of the rate of temperature increase and saturate by a fluence of approx. 2 x 10 22 n/cm 2 (E > 0.1 MeV). Losses in strength are dependent on the rate of temperature increase but saturate at a fluence of approx.5 x 10 22 n/cm 2 . Evidence is presented to show that fission products are probably responsible for the degradation in mechanical properties

  9. Canada helps build food irradiation centre

    International Nuclear Information System (INIS)

    Thomas, R.

    1990-01-01

    In a project backed by the Canadian International Development Agency, Nordion has built a new food irradiation research and development centre in Thailand, and trained Thai personnel in its operation. Consumer market tests of suitably labelled Thai irradiated foods are planned in Canada, once regulatory approval is obtained. Papayas, mangoes and shrimp are of particular interest

  10. Radiation protection instruments based on tissue equivalent proportional counters: Part II of an international intercomparison

    International Nuclear Information System (INIS)

    Alberts, W.G.; Dietz, E.; Guldbakke, S.; Kluge, H.; Schumacher, H.

    1988-04-01

    This report describes the irradiation conditions and procedures of Part II of an international intercomparison of tissue-equivalent proportional counters used for radiation protection measurements. The irradiations took place in monoenergetic reference neutron fields produced by the research reactor and accelerator facilities of the PTB Braunschweig in the range from thermal neutrons to 14.8 MeV. In addition measurements were performed in 60 Co and D 2 O-moderated 252 Cf radiation fields. Prototype instruments from 7 European groups were investigated. The results of the measurements are summarized and compared with the reference data of the irradiations. (orig.) [de

  11. Effects of Gamma Irradiation on Shelf-Life and Sensory Scores of Squid Sundae under Accelerated Storage Conditions

    International Nuclear Information System (INIS)

    Kim, H.J.; Kim, K.B.W.R.; Kim, D.H.; Sunwoo, C.; Jung, S.A.; Jeong, D.H.; Jung, H.Y.; Ahn, D.H.; Kim, J.H.; Lee, J.W.; Do, S.R.; Byun, M.W.

    2012-01-01

    This study was conducted to examine the effects of gamma irradiation on the shelf-life and sensory scores of squid Sundae under accelerated storage conditions. Squid Sundae was stored at 37°C for 35 days following gamma irradiation at doses of 0, 10, and 20 kGy. For total viable cell counts, control and gamma-irradiated (GI) (10 kGy) squid Sundae were already spoiled in 4 days, whereas GI (20 kGy) squid Sundae showed complete suppression of bacterial growth during storage. There were no significant changes in pH values compared to the control. The VBN and TBARS (thiobarbituric acid reactive substance) values of GI (20 kGy) squid Sundae were significantly lower than those of the control. In addition, the induction period of GI (20 kGy) squid Sundae as measured by a Rancimat showed a higher level compared to that of the control. In the sensory evaluation, there were no significant changes between the control and GI samples. These results suggest that a dose of 20 kGy is the optimum and effective dose for preservation of squid Sundae. (author)

  12. ANALYSIS OF DATA ON DOSES OF EXTERNAL TERRIGENOUS IRRADIATION OF THE RUSSIAN FEDERATION POPULATION IN MUNICIPAL CONDITIONS

    Directory of Open Access Journals (Sweden)

    I. P. Stamat

    2015-01-01

    Full Text Available By this time in the Russian Federation there is collected a huge file of data describing the influence of all natural sources of ionizing radiation on population in municipal conditions. These data are collected and generalized in radiation hygiene passports of the Russian Federation for the last 16 years and in the reporting forms of federal statistical supervision No 4-DOZ “Data on doses of population irradiation due to the natural and manchanged radiation background” for a period of 14 years. These data are received by direct measurements of gamma radiation dose rate in the premises and in the open air on the territory of settlements. Measurements were made with the most different dosimeters; their technical and metrological parameters differ considerably. In this regard of certain interest is evaluation of this data reliability degree; that will help to find out the reasons of higher levels of the Russian Federation population external irradiation in comparison with average global dose values.In this article an attempt was made to evaluate reliability degree of data on the population external irradiation doses using the radiation hygiene passports of territories and reporting forms No 4-DOZ for the whole period of supervision. For this there was used the known dependence between the gamma radiation dose rate and natural radionuclides effective specific activity (AEFF in inhabitancy objects. For this purpose there were used the data on average AEFF values of building raw materials and of local manufacture materials, which are presented in radiation hygiene passports of territories. Definition of design value of gamma radiation dose rate in the buildings and in the open air according to AEFF measurement data in building raw materials and in local manufacture materials actually enables to get an independent evaluation of the population external irradiation doses. Comparison of two evaluations of the population external irradiation levels

  13. Water chemistry of the JMTR IASCC irradiation loop system

    International Nuclear Information System (INIS)

    Hanawa, Satoshi; Oogiyanagi, Jin; Mori, Yuichiro; Saito, Junichi; Tsukada, Takashi

    2006-01-01

    Irradiation assisted stress corrosion cracking (IASCC) is recognized as an important degradation issue of the core-internal material for aged Boiling Water Reactors (BWRs). Therefore, irradiation loop system has been developed and installed in the Japan Materials Testing Reactor to perform the IASCC irradiation test. In the IASCC irradiation test, water chemistry of irradiation field is one of the most important key parameters because it affects initiation and propagation of cracks. This paper summarizes the measurement and evaluation method of water chemistry of IASCC irradiation loop system. (author)

  14. Irradiation effects on hydrases for biomedical applications

    International Nuclear Information System (INIS)

    Furuta, Masakazu; Ohashi, Isao; Oka, Masahito; Hayashi, Toshio

    2000-01-01

    To apply an irradiation technique to sterilize 'Hybrid' biomedical materials including enzymes, we selected papain, a well-characterized plant endopeptidase as a model to examine durability of enzyme activity under the practical irradiation condition in which limited data were available for irradiation inactivation of enzymes. Dry powder and frozen aqueous solution of papain showed significant durability against 60 Co-gamma irradiation suggesting that, the commercial irradiation sterilizing method is applicable without modification. Although irradiation of unfrozen aqueous papain solution showed an unusual change of the enzymatic activity with the increasing doses, and was totally inactivated at 15 kGy, we managed to keep the residual activity more than 50% of initial activity after 30-kGy irradiation, taking such optimum conditions as increasing enzyme concentration from 10 to 100 mg/ml and purging with N 2 gas to suppress the formation of free radicals. (author)

  15. KEY RESULTS FROM IRRADIATION AND POST-IRRADIATION EXAMINATION OF AGR-1 UCO TRISO FUEL

    Energy Technology Data Exchange (ETDEWEB)

    Demkowicz, Paul A.; Hunn, John D.; Petti, David A.; Morris, Robert N.

    2016-11-01

    The AGR-1 irradiation experiment was performed as the first test of tristructural isotropic (TRISO) fuel in the US Advanced Gas Reactor Fuel Development and Qualification Program. The experiment consisted of 72 right cylinder fuel compacts containing approximately 3×105 coated fuel particles with uranium oxide/uranium carbide (UCO) fuel kernels. The fuel was irradiated in the Advanced Test Reactor for a total of 620 effective full power days. Fuel burnup ranged from 11.3 to 19.6% fissions per initial metal atom and time average, volume average irradiation temperatures of the individual compacts ranged from 955 to 1136°C. This paper focuses on key results from the irradiation and post-irradiation examination, which revealed a robust fuel with excellent performance characteristics under the conditions tested and have significantly improved the understanding of UCO coated particle fuel irradiation behavior within the US program. The fuel exhibited a very low incidence of TRISO coating failure during irradiation and post-irradiation safety testing at temperatures up to 1800°C. Advanced PIE methods have allowed particles with SiC coating failure to be isolated and meticulously examined, which has elucidated the specific causes of SiC failure in these specimens. The level of fission product release from the fuel during irradiation and post-irradiation safety testing has been studied in detail. Results indicated very low release of krypton and cesium through intact SiC and modest release of europium and strontium, while also confirming the potential for significant silver release through the coatings depending on irradiation conditions. Focused study of fission products within the coating layers of irradiated particles down to nanometer length scales has provided new insights into fission product transport through the coating layers and the role various fission products may have on coating integrity. The broader implications of these results and the application of

  16. Environmental application of gamma technology: Update on the Canadian sludge irradiator

    Science.gov (United States)

    Swinwood, Jean F.; Fraser, Frank M.

    1993-10-01

    Waste treatment and disposal technologies have recently been subjected to increasing public and regulatory scrutiny. Concern for the environment and a heightened awareness of potential health hazards that could result from insufficient or inappropriate waste handling methods have combined to push waste generators in their search for new treatment alternatives. Gamma technology can offer a new option for the treatment of potentially infectious wastes, including municipal sewage sludge. Sewage sludge contains beneficial plant nutrients and a high organic component that make it ideal as a soil conditioning agent or fertilizer bulking material. It also carries potentially infectious microorganisms which limit opportunities for beneficial recycling of sludges. Gamma irradiation-disinfection of these sludges offers a reliable, fast and efficient method for safe sludge recycling. Nordion International's Market Development Division was created in 1987 as part of a broad corporate reorganization. It was given an exclusive mandate to develop new applications of gamma irradiation technology and markets for these new applications. Nordion has since explored and developed opportunities in food irradiation, pharmaceutical/cosmetic products irradiation, biomedical waste sterilization, airline waste disinfection, and sludge disinfection for recycling. This paper focuses on the last of these -a proposed sludge recycling facility that incorporates a cobalt 60 sludge irradiator.

  17. Internal structure transition of spin-on glass by electron beam irradiation

    International Nuclear Information System (INIS)

    Araki, Makoto; Taniguchi, Jun; Sawada, Nobuo; Utsumi, Takayuki; Miyamoto, Iwao

    2007-01-01

    The effects of electron beam (EB) irradiation on spin-on glass (SOG) were investigated using thermal desorption spectroscopy. We were able to employ heat treatment as a 'development process', since we discovered that heat treatment breaks different bonds in SOG depending on whether it is applied before or after EB irradiation of SOG. In the case, when heat treatment was applied before EB irradiation of SOG, it was possible to break the Si-C bond at about 500 deg. C. In the case, when heat treatment was applied after EB irradiation of SOG, on the other hand, the -SiC bond could be broken at a lower temperature of about 400 deg. C. Using this difference between the two bond-breaking temperatures, it was possible to develop SOG using thermal desorption development (TDD). Moreover, the bond-breaking mechanisms revealed that the organic components in SOG play an important role in TDD. Hence, in order to determine the influence of organic components on TDD, the development characteristics of SOG samples with 10% and 15% organic contents were investigated

  18. Registration properties of different types of CR-39 in vacuum conditions of irradiation

    International Nuclear Information System (INIS)

    Golovchenko, A.N.; Tret'yakova, S.P.

    1991-01-01

    Sensitivity change has been studied of different types of CR-39 detectors (Pershore, Tastrak, Intercast, Ma-ND/α) in dependence on holding time of detector in vacuum chamber at the residual pressure P ≅ 2x10 -2 and ≅ 5x10 -3 Pa before their irradiation with alpha particles from thin 238 Pu source and accelerated charged ions with atomic number Z=2-10 and energy of 9.1 MeV/nucleon. Polymer of Intercast Company turned out to be the most stable one to vacuum effect, and detector does not change the sensitivity up to response function REL 200 ≅ 1 MeVxcm 2 xmg -1 in the mentioned experiment conditions. 7 refs.; 3 figs

  19. Quality control in the commerce of irradiated foods

    International Nuclear Information System (INIS)

    Bustos R, M.E.

    2000-01-01

    In spite of an irradiated food is innocuous for health and that the irradiation process offers great advantages as conservation and hygiene method and it has been recognised by the Agriculture and Health International organizations and although the adequate equipment exists to make this treatment in the majority of countries, an international trade of irradiated foods has not been established and it is that it has to be required that the quality control of the treatment should be regulated by the corresponding authorities and it also should be harmonized with other countries for the commercial interchange. Owing to up to present an identification method of irradiated foods which is validated, the unique quality control for irradiated foods is realized in the irradiation plant, measuring the absorbed dose in products, using dosimetric systems justly calibrated and standardized to be used the adequate for the type of product and dose level which is wanted to be measured for foods mainly for quarantine treatment which is very important to determine that any part of the irradiation system has reached the minimum dose to obtain the technical effect which is desired and that it does not exceed the maximum dose for that the product quality not to be altered. (Author)

  20. Codex general standard for irradiated foods and recommended international code of practice for the operation of radiation facilities used for the treatment of foods

    International Nuclear Information System (INIS)

    1990-06-01

    The FAO/WHO Codex Alimentarius Commission was established to implement the Joint FAO/WHO Food Standards Programme. The purpose of this programme is to protect the health of consumers and to ensure fair practices in the food trade. At its 15th session, held in July 1983, the Commission adopted a Codex General Standard for Irradiated Foods and a Recommended International Code of Practice for the Operation of Radiation Facilities used for the Treatment of Foods. This Standard takes into account the recommendations and conclusions of the Joint FAO/IAEA/WHO Expert Committees convened to evaluate all available data concerning the various aspects of food irradiation. This Standard refers only to those aspects which relate to the processing of foods by ionising energy. The Standard recognizes that the process of food irradiation has been established as safe for general application to an overall average level of absorbed dose of 10 KGy. The latter value shold not be regarded as a toxicological upper limit above which irradiated foods become unsafe; it is simply the level at or below which safety has been established. The Standard provides certain mandatory provisions concerning the facilities used and for the control of the process in the irradiation plants. The present Standard requires that shipping documents accompanying irradiated foods moving in trade should indicate the fact of irradiation. The labelling of prepackaged irradiated foods intended for direct sale to the consumer is not covered in this Standard

  1. Codex general standard for irradiated foods and recommended international code of practice for the operation of radiation facilities used for the treatment of foods

    International Nuclear Information System (INIS)

    1984-01-01

    The FAO/WHO Codex Alimentarius Commission was established to implement the Joint FAO/WHO Food Standards Programme. The purpose of this programme is to protect the health of consumers and to ensure fair practices in the food trade. At its 15th session, held in July 1983, the Commission adopted a Codex General Standard for Irradiated Foods and a Recommended International Code of Practice for the Operation of Radiation Facilities used for the Treatment of Foods. This Standard takes into account the recommendations and conclusions of the Joint FAO/IAEA/WHO Expert Committees convened to evaluate all available data concerning the various aspects of food irradiation. This Standard refers only to those aspects which relate to the processing of foods by ionising energy. The Standard recognizes that the process of food irradiation has been established as safe for general application to an overall average level of absorbed dose of 10 kGy. The latter value should not be regarded as a toxicological upper limit above which irradiated foods become unsafe; it is simply the level at or below which safety has been established. The Standard provides certain mandatory provisions concerning the facilities used and for the control of the process in the irradiation plants. The present Standard requires that shipping documents accompanying irradiated foods moving in trade should indicate the fact of irradiation. The labelling of prepackaged irradiated foods intended for direct sale to the consumer is not covered in this Standard

  2. Current status of food irradiation in the world. Trend in Asia

    International Nuclear Information System (INIS)

    Kume, Tamikazu

    2002-01-01

    This review describes the current status of food irradiation in the world and particularly, its trends in Asia, based on the report of the economic scale investigation on the irradiation in United States and Japan (2001) and on the information of 12th International Meeting on Radiation Processing in France in 2001 and on personal communications. International Consultative Group on Food Irradiation promotes its activities of irradiation globally and 46 countries are affiliated. Food irradiation is allowed in 52 countries. In 1999, 257,000 t of food is irradiated in the world, of which 1/3 is due to spice. The facilities for the irradiation have such sources as 60 Co and 137 Cs γ-rays, electron beam of <10 MeV and X-ray with <5 MeV. Detection methods of irradiated foods are summarized by the project of Analytical Detection Methods for Irradiation Treatment of Foods. The US is the most advanced country in the irradiation and, in Japan, only irradiation of potato is permitted. The detailed present status is also described of Bangladesh, China (the irradiation is most widely conducted in the world), India, Indonesia, Korea, Malaysia, Thailand and Vietnam. Recently Australia and New Zealand have started the irradiation. (K.H.)

  3. Irradiation and the food industry in France

    International Nuclear Information System (INIS)

    Boisseau, P.

    1994-01-01

    Part of a special section on food irradiation. The historical development in France of some industrial applications of food irradiation resulting from efficient technology transfer to the food industry is discussed. The 4 basic steps in successfully marketing any technology transfer, including irradiated foods, are that research must define conditions of the product's application, legislation must specify conditions of its application, consumers must accept the product, and appropriate processing capacity must exist

  4. Inactivation of infectious bovine rhinotracheitis virus by gamma irradiation

    International Nuclear Information System (INIS)

    Nonomiya, Takashi; Yamashiro, Tomio; Tsutsumi, Takamasa; Ito, Hitoshi; Ishigaki, Isao.

    1990-01-01

    Radiation inactivation of Infectious Boivne Rhinotracheitis (IBR) virus was investigated by suspending in a commercial preparation medium (c.p.m.) or IBR antibody free serum and irradiated at room temperature or dry ice frozen condition. Normal pooled serum was also analysed by electrophoresis with cellulose acetate membrane after irradiation at frozen and non-frozen condition. The virus inactivation was determined by MDBK cell line which 50 % tissue culture infectious dose (TCID 50 ) was calculated by Behrens Kaerber method. D 10 value at non-frozen condition in serum was obtained as 1.1-1.2 kGy and that in c.p.m. was 1.3-1.4 kGy. On the other hand, D 10 value was increased to 3.4-3.6 kGy in serum and 3.9 kGy in c.p.m. at frozen condition. On the irradiation effect of bovine serum, four peaks of albumin, α, β and γ-globulin fraction were obtained from non-irradiation and irradiated serum up to 2 kGy at non-frozen condition by electrophoresis. More than 4 kGy irradiation, the peaks of globulin fractions became not clear and at more than 8 kGy, changed to one large peak. On the other hand, these changes of electrophoretic patterns were not observed even at 30 kGy irradiation in frozen condition. From these results, necessary dose was decided as 20-25 kGy at frozen condition for inactivation of IBR virus in serum. (author)

  5. 8th International Symposium on Heating, Ventilation and Air Conditioning

    CERN Document Server

    Zhu, Yingxin; Li, Yuguo; Vol.1 Indoor and Outdoor Environment; Vol.2 HVAC&R Component and Energy System; Vol.3 Building Simulation and Information Management

    2014-01-01

    Proceedings of the 8th International Symposium on Heating, Ventilation and Air Conditioning is based on the 8th International Symposium of the same name (ISHVAC2013), which took place in Xi’an on October 19-21, 2013. The conference series was initiated at Tsinghua University in 1991 and has since become the premier international HVAC conference initiated in China, playing a significant part in the development of HVAC and indoor environmental research and industry around the world. This international conference provided an exclusive opportunity for policy-makers, designers, researchers, engineers and managers to share their experience. Considering the recent attention on building energy consumption and indoor environments, ISHVAC2013 provided a global platform for discussing recent research on and developments in different aspects of HVAC systems and components, with a focus on building energy consumption, energy efficiency and indoor environments. These categories span a broad range of topics, and the proce...

  6. Pre-sowing irradiation of vegetable seeds

    Energy Technology Data Exchange (ETDEWEB)

    Stoyanov, S

    1975-01-01

    Results are reported of trials with radiation stimulation of vegetable crops conducted under farm conditions in different regions. They were based on exact tests accomplished at the IGHB. Pre-sowing irradiation of seed increased the greenhouse yield of Extase tomato variety by 15%; it increased the yield of Triumph tomato variety under field conditions as well. The pepper variety Kourtovska Kapiya and eggplant variety Bulgarski 12, both grown from irradiated seed in open field produced 18% and 5.5% higher yields, respectively. Irradiation of vegetable seeds finds a large application in the farm practice.

  7. Pre-sowing irradiation of vegetable seeds

    International Nuclear Information System (INIS)

    Stoyanov, S.

    1975-01-01

    Results are reported of trials with radiation stimulation of vegetable crops conducted under farm conditions in different regions. They were based on exact tests accomplished at the IGHB. Pre-sowing irradiation of seed increased the greenhouse yield of Extase tomato variety by 15%; it increased the yield of Triumph tomato variety under field conditions as well. The pepper variety Kourtovska Kapiya and eggplant variety Bulgarski 12, both grown from irradiated seed in open field produced 18% and 5.5% higher yields, respectively. Irradiation of vegetable seeds finds a large application in the farm practice. (author)

  8. Prolonged bone marrow and skin allograft survival after pretransplant conditioning with cyclophosphamide and total lymphoid irradiation

    International Nuclear Information System (INIS)

    Kersey, J.H.; Kruger, J.; Song, C.; Kloster, B.

    1980-01-01

    Current studies were designed to provide long-term survival of allogeneic skin and bone marrow in mice preconditioned with various combinations of cyclophosphamide (CY) and/or total lymphoid irradiation (TLI). Long-term skin graft and bone marrow survival was obtained across the major histocompatibility barrier (BALB/c into C57BL/6) using pregrafting conditioning with either fractionated TLI or the combination of CY with a single dose of TLI. CY alone and a single dose of TLI alone were relatively ineffective as regrafting immunosuppressive combinations. Allogeneic bone marrow was required for long-term skin graft survival with either conditioning regimen. Allogeneic marrow transplantation resulted in somewhat more deaths than syngeneic transplantation with both CY + TLI and fractionated TLI

  9. Plug-welding of ODS cladding tube for BOR-60 irradiation. Welding condition setting. Device remodeling and welding

    International Nuclear Information System (INIS)

    Seki, Masayuki; Ishibashi, Fujio; Kono, Syusaku; Hirako, Kazuhito; Tsukada, Tatsuya

    2003-04-01

    Irradiation test in BOR-60 at RIAR to judge practical use prospect of ODS cladding tube at early stage is planned as Japan-Russia a joint research. RIAR does fuel design of fuel pin used for this joint research. JNC manufactures ODS cladding tube and bar materials (two steel kind of martensite and ferrite), upper endplug production. They are welded by pressurized resistance welding, and are inspected in JNC Tokai, transported to RIAR. And RIAR manufactures vibration packing fuel pin. On the upper endplug welding by pressurized resistance welding method, we worded on the problems such as decision of welding condition by changing the size and crystallization of cladding tube and the design of endplug, and the chucking device remodeling to correspond to the long scale cladding tube welding system (included handling) and of quality assurance method. Especially, use of long scale cladding tube caused problem that bending transformation occurred in cladding tube by welding pressure. However, we solved this problem by shortening the distance of cladding tube colette chuck and pressure receiving, and by putting the sleeve in an internal space of welding machine, losing the bending of cladding tube. Moreover, welding defects were occurred by the difference of an inside state, an inside defect and recrystallization of cladding tube. We solved the problem by inside grinding for the edge of tube, angle beam method by ultrasonic wave, and ultrasonic wave form confirmation. Manufacturing process with long scale cladding tube including heat-treatment to remove combustion return and remaining stress was established besides, Afterwards, welding of ODS cladding tube and upper endplug. As the quality assurance system, we constructed [Documented procedure (referred to JOYO)] based on [Document of the QA plan] by OEC. Welding and inspection were executed by the document procedure. It is thought that the quality assurance method become references for the irradiation test in JOYO in the

  10. Loss of photoreactivation in UV-irradiated cultured fish cells under different conditions

    International Nuclear Information System (INIS)

    Mano, Y.; Kator, K.; Egami, N.

    1982-01-01

    CAF-MM1 cells derived from a goldfish have photoreactivability for the damage induced by ultraviolet light. When UV-irradiated cells were incubated in the dark at 26 0 C, the longest interval in which photoreactivation (PR) was observed, measured by colony formation technique, was about 30h after the UV irradiation. However, if the cells were incubated at 20 0 C, the effective time was prolonged. Since each time appeared to correspond to the doubling time of the cells at each temperature, the loss of photoreactivability is suggested to be closely related to cell growth or progression of cell cycle. The loss of PR was not observed in the cells held in confluence up to 48h after UV irradiation. Photoreactivating enzyme in growing CAF-MM1 cells incubated in the dark for 24h after UV irradiation was shown to be active, so that it is not possible that the cause of the loss of PR is change in the activity of photoreactivating enzyme. (author)

  11. Mutant strain screening by 60Co γ-rays irradiation and its cellulase enzyme produce condition

    International Nuclear Information System (INIS)

    Song Andong; Su Lijuan; Xie Hui; Qu Yinbo; Yang Ming

    2008-01-01

    A mutant strain A50 with high cellulase activity was induced and isolated by using 60 Co γ-rays irradiation from the initial Penicillium decumbens A10. The optimum fermentation conditions of A50 were investigated through orthogonal designing experiment, the major carbon resource 5%, the ratio between wheat bran and corn straw 1:1, the concentration of glucose as supplemental carbon 0.1%, the concentration of (NH 4 ) 2 HPO 4 as supplemental nitrogen resource 0.2%, the initial pH of liquid medium 5.0, the inoculated amount for fermentation 10% and the concentration of Tween-80 0.1%, 30 ml initial media filled in the 300 ml flask with culture condition of 32 degree C and 200 r/min. Under the optimum conditions mentioned above, the highest activities of cellulase and filter paper enzyme were 27.28 and 1.98IU/ml at 60 h fermentation, respectively, which was 33.2% and 45.59% higher than those of the initial strain. (authors)

  12. Irradiation behaviors of coated fuel particles, (4)

    International Nuclear Information System (INIS)

    Fukuda, Kousaku; Kashimura, Satoru; Ogawa, Toru; Ikawa, Katsuichi; Iwamoto, Kazumi; Ishimoto, Kiyoshi

    1981-09-01

    Loose coated fuel particles prepared in confirmity to a preliminary design for the multi-purpose VHTR in fiscal 1972 - 1974 were irradiated by 73F - 12A capsule in JMTR. Main purpose for this irradiation experiment was to examine irradiation stability of the candidate TRISO coated fuel particles for the VHTR. Also the coated particles possessing low-density kernel (90%TD), highly anisotropic OLTI-PyC and ZrC coating layer were loaded with the candidate particles in this capsule. The coated particles were irradiated up to 1.5 x 10 21 n/cm 2 of fast neutron fluence (E > 0.18 MeV) and 3.2% FIMA of burnup. In the post irradiation examination it was observed that among three kinds of TRISO particles exposed to irradiation corresponding to the normal operating condition of the VHTR ones possessing poor characteristics of the coating layers did not show a good stability. The particles irradiated under abnormally high temperature condition (> 1800 0 C) revealed 6.7% of max. EOL failure fraction (95% confidence limit). Most of these particles were failed by the ameoba effect. Furthermore, among four kinds of the TRISO particles exposed to irradiation corresponding to the transient condition of the VHTR (--1500 0 C) the two showed a good stability, while the particles possessing highly anisotropic OLTI-PyC or poorly characteristic coating layers were not so good. (author)

  13. Design and analysis of CANDU NPP internal structures for Japanese conditions

    International Nuclear Information System (INIS)

    Aziz, T.S.; Murakami, H.

    1991-01-01

    The design and analysis approach for the CANDU 6 Internal Concrete Structure (ICS) for Japanese seismic conditions is described. The approach consists of a seismic analysis to determine the design level accelerations; followed by a detailed finite element analysis to determine the section forces for each shell element. The extent of the design modifications for the original structure to meet the Japanese design conditions is given. (author)

  14. Analysis of volatiles from irradiated yeast extract

    International Nuclear Information System (INIS)

    Liao Tao; Li Xin; Zu Xiaoyan; Chen Yuxia; Geng Shengrong

    2013-01-01

    The method for determination volatiles from irradiated yeast extract (YE) using headspace solid phase microextraction (HS-SPME) and gas chromatography-mass spectrometry (GC-MS) was developed in this paper. The extraction conditions were optimized with reference to the peak area and number of volatiles as aldehyde, ketone, alcohol, acid, ester and sulfur compounds. The optimized conditions of HS-SPME for volatiles in irradiated YE were: divinyl benzene/Carboxen/polydimethylsiloxane (DVB/CAR/PDMS) fiber, extration time 40 min, extraction temperature 40℃. The volatiles from YE irradiated by 0-19.8 kGy were detected using HS-SPME coupled with GC-MS. The results showed that only 15 volatiles were detected from no irradiated YE and main compounds were acetic acid, 2, 3-butanediol and 1-hexanol, 2-ethyl-. There were 40 volatiles detected from irradiated YE and the main compounds were acetic acid, phenylethyl alcohol, heptanal and nonanal. Compare to no irradiated yeast extract, the aldehyde, ketone, alkene and disulfide, dimethyl were produced by irradiating process. (authors)

  15. International Global Crop Condition Assessments in the framework of GEOGLAM

    Science.gov (United States)

    Becker-Reshef, I.; Justice, C. O.; Vermote, E.; Whitcraft, A. K.; Claverie, M.

    2013-12-01

    The Group on Earth Observations (partnership of governments and international organizations) developed the Global Agricultural Monitoring (GEOGLAM) initiative in response to the growing calls for improved agricultural information. The goal of GEOGLAM is to strengthen the international community's capacity to produce and disseminate relevant, timely and accurate forecasts of agricultural production at national, regional and global scales through the use of Earth observations. This initiative is designed to build on existing agricultural monitoring initiatives at national, regional and global levels and to enhance and strengthen them through international networking, operationally focused research, and data/method sharing. GEOGLAM was adopted by the G20 as part of the action plan on food price volatility and agriculture and is being implemented through building on the extensive GEO Agricultural Community of Practice (CoP) that was initiated in 2007 and includes key national and international agencies, organizations, and universities involved in agricultural monitoring. One of the early GEOGLAM activities is to provide harmonized global crop outlooks that offer timely qualitative consensus information on crop status and prospects. This activity is being developed in response to a request from the G-20 Agricultural Market Information System (AMIS) and is implemented within the global monitoring systems component of GEOGLAM. The goal is to develop a transparent, international, multi-source, consensus assessment of crop growing conditions, status, and agro-climatic conditions, likely to impact global production. These assessments are focused on the four primary crop types (corn, wheat, soy and rice) within the main agricultural producing regions of the world. The GEOGLAM approach is to bring together international experts from global, regional and national monitoring systems that can share and discuss information from a variety of independent complementary sources in

  16. A simple method for identification of irradiated spices

    International Nuclear Information System (INIS)

    Behere, A.; Desai, S.R.P.; Nair, P.M.; Rao, S.M.D.

    1992-01-01

    Thermoluminescence (TL) properties of curry powder, a salt containing spice mixture, and three different ground spices, viz, chilli, turmeric and pepper, were compared with TL of table salt. The spices other than curry powder, did not exhibit characteristic TL in the absence of salt. Therefore studies were initiated to develop a simple and reliable method using common salt for distinguishing irradiated spices (10 kGy) from unirradiated ones under normal conditions of storage. Common salt exhibited a characteristic TL glow at 170 o C. However, when present in curry powder, the TL glow of salt showed a shift to 208 o C. It was further observed that upon storage up to 6 months, the TL of irradiated curry powder retained about 10% of the original intensity and still could be distinguished from the untreated samples. From our results it is evident that common salt could be used as an indicator either internally or externally in small sachets for incorporating into prepacked spices. (author)

  17. A simple method for identification of irradiated spices

    Energy Technology Data Exchange (ETDEWEB)

    Behere, A; Desai, S R.P.; Nair, P M [Bhabha Atomic Research Centre, Bombay (India). Food Technology and Enzyme Engineering Div.; Rao, S M.D. [Bhabha Atomic Research Centre, Bombay (India). Technical Physics and Prototype Engineering Div.

    1992-07-01

    Thermoluminescence (TL) properties of curry powder, a salt containing spice mixture, and three different ground spices, viz, chilli, turmeric and pepper, were compared with TL of table salt. The spices other than curry powder, did not exhibit characteristic TL in the absence of salt. Therefore studies were initiated to develop a simple and reliable method using common salt for distinguishing irradiated spices (10 kGy) from unirradiated ones under normal conditions of storage. Common salt exhibited a characteristic TL glow at 170{sup o}C. However, when present in curry powder, the TL glow of salt showed a shift to 208{sup o}C. It was further observed that upon storage up to 6 months, the TL of irradiated curry powder retained about 10% of the original intensity and still could be distinguished from the untreated samples. From our results it is evident that common salt could be used as an indicator either internally or externally in small sachets for incorporating into prepacked spices. (author).

  18. Irradiation embrittlement and optimisation of annealing

    International Nuclear Information System (INIS)

    1993-01-01

    This conference is composed of 30 papers grouped in 6 sessions related to the following themes: neutron irradiation effects in pressure vessel steels and weldments used in PWR, WWER and BWR nuclear plants; results from surveillance programmes (irradiation induced damage and annealing processes); studies on the influence of variations in irradiation conditions and mechanisms, and modelling; mitigation of irradiation effects, especially through thermal annealing; mechanical test procedures and specimen size effects

  19. Irradiation embrittlement and optimisation of annealing

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    This conference is composed of 30 papers grouped in 6 sessions related to the following themes: neutron irradiation effects in pressure vessel steels and weldments used in PWR, WWER and BWR nuclear plants; results from surveillance programmes (irradiation induced damage and annealing processes); studies on the influence of variations in irradiation conditions and mechanisms, and modelling; mitigation of irradiation effects, especially through thermal annealing; mechanical test procedures and specimen size effects.

  20. Development of irradiation technique with satured temperature capsule in the JMTR

    International Nuclear Information System (INIS)

    Ohtaka, Kimihiro

    1999-01-01

    The irradiation assisted stress corrosion cracking (IASCC) of in-core structural materials caused by the simultaneous effects of neutron irradiation and high temperature water environments has been pointed out as one of the major concerns not only for the light water reactors (LWRs) but also for the water-cooled fusion reactor, i.e,. ITER. The IASCC of the austenitic stainless steels or nickel base alloys has been studied for more than ten years under international efforts in the various projects for the plant life assessment and extension of LWRs. However its mechanism has not been clarified yet in spite of the extensive post-irradiation examinations. Under this situation, it is desired to perform irradiation tests under specially controlled conditions so that the effect of irradiation and high temperature water can be separately evaluated. In the Japan Materials Testing Reactor (JMTR), irradiation technique with the saturation temperature capsule (SATCAP) was developed for irradiation of the materials in the water with high, but constant, temperature and applied to study the IASCC. The capability of the SATCAP was improved by enhancing the temperature controllability to irradiate materials even in a low gamma region in the JMTR core. The performance tests of the improved SATCAP carried out in the JMTR have proven its capabilities. Based on experiences of the SATCAP, preliminary design study for the upgraded in-pile test facility are now underway in the JMTR. The test facility has a new test loop to achieve irradiate test simulated water environment of LWRs. The design, test results of the SATCAP and the design study of upgraded in-pile test facility are described in this paper

  1. Assessment of void swelling in austenitic stainless steel PWR core internals

    International Nuclear Information System (INIS)

    Chung, H.M.

    2006-01-01

    As many pressurized water reactors (PWRs) age and life extension of the aged plants is considered, void swelling behavior of austenitic stainless steel (SS) core internals has become the subject of increasing attention. In this report, the available database on void swelling and density change of austenitic SSs was critically reviewed. Irradiation conditions, test procedures, and microstructural characteristics were carefully examined, and key factors that are important to determine the relevance of the database to PWR conditions were evaluated. Most swelling data were obtained from steels irradiated in fast breeder reactors at temperatures >385 C and at dose rates that are orders of magnitude higher than PWR dose rates. Even for a given irradiation temperature and given steel, the integral effects of dose and dose rate on void swelling should not be separated. It is incorrect to extrapolate swelling data on the basis of 'progressive compounded multiplication' of separate effects of factors such as dose, dose rate, temperature, steel composition, and fabrication procedure. Therefore, the fast reactor data should not be extrapolated to determine credible void swelling behavior for PWR end-of-life (EOL) or life-extension conditions. Although the void swelling data extracted from fast reactor studies is extensive and conclusive, only limited amounts of swelling data and information have been obtained on microstructural characteristics from discharged PWR internals or steels irradiated at temperatures and at dose rates comparable to those of a PWR. Based on this relatively small amount of information, swelling in thin-walled tubes and baffle bolts in a PWR is not considered a concern. As additional data and relevant research becomes available, the newer results should be integrated with existing data, and the worthiness of this conclusion should continue to be scrutinized. PWR baffle reentrant corners are the most likely location to experience high swelling rates, and

  2. Studies on Post-Irradiation DNA Degradation in Micrococcus Radiodurans, Strain RII51

    DEFF Research Database (Denmark)

    Auda, H.; Emborg, C.

    1973-01-01

    The influence of irradiation condition on post-irradiation DNA degradation was studied in a radiation resistant mutant of M. radiodurans, strain ${\\rm R}_{{\\rm II}}5$. After irradiation with 1 Mrad or higher more DNA is degraded in cells irradiated in wet condition than in cells irradiated with t...

  3. Noninvasive photoacoustic measurement of absorption coefficient using internal light irradiation of cylindrical diffusing fiber

    Science.gov (United States)

    Peng, Dong-qing; Zhu, Li-li; Li, Zhi-fang; Li, Hui

    2017-09-01

    Absorption coefficient of biological tissue is an important parameter in biomedicine, but its determination remains a challenge. In this paper, we propose a method using focusing photoacoustic imaging technique and internal light irradiation of cylindrical diffusing fiber (CDF) to quantify the target optical absorption coefficient. Absorption coefficients for ink absorbers are firstly determined through photoacoustic and spectrophotometric measurements at the same excitation, which demonstrates the feasibility of this method. Also, the optical absorption coefficients of ink absorbers with several concentrations are measured. Finally, the two-dimensional scanning photoacoustic image is obtained. Optical absorption coefficient measurement and simultaneous photoacoustic imaging of absorber non-invasively are the typical characteristics of the method. This method can play a significant role for non-invasive determination of blood oxygen saturation, the absorption-based imaging and therapy.

  4. The influence of the irradiation regime upon mycotoxins production under experimental conditions

    International Nuclear Information System (INIS)

    Uralova, M.; Patzeltova, N.; Havlik, F.

    1987-01-01

    The inactivation is discussed of the toxinogenic strain Aspergillus flavus following the application of gamma radiation to wheat. The effects of the applied dose and of the absorbed dose of ionizing radiation upon the inhibition of mycelium growth and toxin production were defined. Aflatoxin B 1 was determined by extraction in chloroform and developed on Silufol R within the chloroform-acetone system. The applied doses of gamma radiation (3-30 kGy) showed that the absorbed dose did not inhibit aflatoxin production. By combining the action of gamma radiation with humidity of the wheat (humidity 13 to 15%; 25% irradiation 6 kGy), inactivation was reached. With the help of toxicologico-genetical tests (the Dominant Lethal Mutations Test, the Three Generations Test) the influence was traced of contaminated, irradiated substrates upon the health of experimental animals. It follows from the results obtained that in long-term feeding with contaminated wheat irradiated with gamma rays no positive mutagenic activity was recorded. It allows to presume that wheat of 25% humidity contaminated with a weakly toxigenic strain Aspergillus flavus irradiated with a dose of 6 kGy, and wheat of a humidity of 13 to 15%, contaminated with a strongly toxinogenic strain of Aspergillus flavus, irradiated with a dose of 6 kGy, were of no genetic risk for white rats. (author). 3 tabs., 9 refs

  5. IAEA International Database on Irradiated Nuclear Graphite Properties. 7th meeting of the Technical Steering Committee

    International Nuclear Information System (INIS)

    Humbert, D.; Wickham, A.J.

    2005-06-01

    This report summarizes the Consultant Meeting '7th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties' held on 16-17 March 2005 at the IAEA Headquarters, Vienna, Austria. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database and to make recommendations for actions for the next year. The purposes of the meeting were fully met. This report contains the current status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  6. IAEA International Database on Irradiated Nuclear Graphite Properties. 6th meeting of the Technical Steering Committee

    International Nuclear Information System (INIS)

    Humbert, D.; Wickham, A.J.

    2004-12-01

    This report summarizes the Consultant Meeting 6th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties' held on 16-17 September 2004 at Plas Tan-Y-Bwlch, Maentwrog, Gwynedd, UK. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database and to make recommendations for actions for the next year. The purposes of the meeting were fully met. This report contains the current status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  7. Application of irradiated wire

    International Nuclear Information System (INIS)

    Uda, I.; Kozima, K.; Suzuki, S.; Tada, S.; Torisu, S.; Veno, K.

    1984-01-01

    Rubber insulated wires are still useful for internal wiring in motor vehicles and electrical equipment because of flexibility and toughness. Irradiated cross-linked rubber materials have been successfully introduced for use with fusible link wire and helically coiled cord

  8. Damage and failure of unirradiated and irradiated fuel rods tested under film boiling conditions

    International Nuclear Information System (INIS)

    Mehner, A.S.; Hobbins, R.R.; Seiffert, S.L.; MacDonald, P.E.; McCardell, R.K.

    1979-01-01

    Power-cooling-mismatch experiments are being conducted as part of the Thermal Fuels Behavior Program in the Power Burst Facility at the Idaho National Engineering Laboratory to evaluate the behavior of unirradiated and previously irradiated light water reactor fuel rods tested under stable film boiling conditions. The observed damage that occurs to the fuel rod cladding and the fuel as a result of film boiling operation is reported. Analyses performed as a part of the study on the effects of operating failed fuel rods in film boiling, and rod failure mechanisms due to cladding embrittlement and cladding melting upon being contacted by molten fuel are summarized

  9. Inactivation of infectious bovine rhinotracheitis virus by gamma irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Nonomiya, Takashi; Yamashiro, Tomio; Tsutsumi, Takamasa (Animal Quarantine Service, Yokohama (Japan)); Ito, Hitoshi; Ishigaki, Isao

    1990-10-01

    Radiation inactivation of Infectious Boivne Rhinotracheitis (IBR) virus was investigated by suspending in a commercial preparation medium (c.p.m.) or IBR antibody free serum and irradiated at room temperature or dry ice frozen condition. Normal pooled serum was also analysed by electrophoresis with cellulose acetate membrane after irradiation at frozen and non-frozen condition. The virus inactivation was determined by MDBK cell line which 50 % tissue culture infectious dose (TCID{sub 50}) was calculated by Behrens Kaerber method. D{sub 10} value at non-frozen condition in serum was obtained as 1.1-1.2 kGy and that in c.p.m. was 1.3-1.4 kGy. On the other hand, D{sub 10} value was increased to 3.4-3.6 kGy in serum and 3.9 kGy in c.p.m. at frozen condition. On the irradiation effect of bovine serum, four peaks of albumin, {alpha}, {beta} and {gamma}-globulin fraction were obtained from non-irradiation and irradiated serum up to 2 kGy at non-frozen condition by electrophoresis. More than 4 kGy irradiation, the peaks of globulin fractions became not clear and at more than 8 kGy, changed to one large peak. On the other hand, these changes of electrophoretic patterns were not observed even at 30 kGy irradiation in frozen condition. From these results, necessary dose was decided as 20-25 kGy at frozen condition for inactivation of IBR virus in serum. (author).

  10. Irradiation induced precipitation: a thermodynamical approach

    International Nuclear Information System (INIS)

    Bocquet, J.-L.; Martin, Georges.

    1979-02-01

    A binary alloy (A, B) under steady state irradiation is considered as a ternary alloy (A, B, defects) in constrained equilibrium (the constraint represented by the irradiation consists in maintaining a given supersaturation of point defects). All possible two-body interactions (attractive, repulsive) have been checked between the solvent A, the solute B, and the defects C. The conditions of an irradiation corresponds to a low point-defect concentration; the only cases of interest are those where such a low concentration makes new phases precipitate, which are richer in solute than the initial solid-solution. Radiation induced precipitation is expected to occur under the following necessary conditions: - when the binary alloy (A, B) shows ordering or is ideal, a necessary condition is that the binary solute-defects must show ordering. - when the binary alloy (A, B) shows clustering, a necessary condition is that the temperature must be close to the critical mixing temperature Tsub(AB)sup(D). The physical significance of these conditions is discussed [fr

  11. China's move to food irradiation

    International Nuclear Information System (INIS)

    Wedekind, L.H.

    1986-01-01

    The Chinese officials outlined China's past and future directions at a recent international food irradiation seminar in Shanghai sponsored by the FAO and IAEA. The meeting was attended by about 170 participants from China and 22 other countries, primarily from the Asian and Pacific region. Three food irradiation plants currently are operating in the region and 14 more are planned over the next 5 years. It was reported that China continues to suffer high food losses, up to 30% for some commodities, primarily due to preservation and storage problems. In January 1986, the first of five regional irradiation facilities planned in China officially opened in Shanghai. The Shanghai irradiation centre plans to process up to 35,000 tons of vegetables a year, as well as some spices, fruits, and non-food products. The Ministry of Public Health has approved seven irradiated foods as safe human diets: rice, potatoes, onions, garlic, peanuts, mushrooms and pork sausages; approval for apples is expected shortly. The Chinese officials at the Shanghai meeting stressed their openness to foreign participation and cooperation in food irradiation's development

  12. High-dose irradiation: Wholesomeness of food irradiated with doses above 10 kGy. Report of a joint FAO/IAEA/WHO study group

    International Nuclear Information System (INIS)

    1999-01-01

    This report presents the recommendations of an international group of experts convened by the World Health Organization, in association with the Food and Agriculture Organization of the United Nations and the International Atomic Energy Agency, to consider the implications of food irradiated to doses higher than those recommended in 1980 by the Joint Expert Committee on the Wholesomeness of Irradiated Food. Irradiation ensures the hygienic quality of food and extends shelf-life. The public perception of the safety of food irradiation has generally precluded its widespread use. However, current applications of food irradiation to doses over 10 kGy have been in the development of high-quality shelf-stable convenience foods for specific target groups such as immunosuppressed individuals and those under medical care, astronauts and outdoor enthusiasts. The Study Group reviewed data relating to the toxicological, nutritional, radiation chemical and physical aspects of food irradiated to doses above 10kGy from a wide range and number of studies carried out over the last forty years. This report presents a comprehensive summary, along with references, of the effectiveness and safety of the irradiation process. It concludes that foods treated with doses greater than 10kGy can be considered safe and nutritionally adequate when produced under established Good Manufacturing Practice

  13. Detection of hydrocarbons in irradiated foods

    International Nuclear Information System (INIS)

    Miyahara, Makoto; Maitani, Tamio; Saito, Akiko; Kamimura, Tomomi; Nagasawa, Taeko; Kobayashi, Yasuo; Ito, Hitoshi

    2003-01-01

    The hydrocarbon method for the detection of irradiated foods is now recognized as the international technique. This method is based on radiolysis of fatty acids in food to give hydrocarbons. In order to expand this technique's application, ten foods (butter, cheese, chicken, pork, beef, tuna, dry shrimp, avocado, papaya, and mango) were irradiated in the range from 0.5 to 10 kGy and the hydrocarbons in them were detected. Recoveries of the hydrocarbons from most foods were acceptable (38-128%). Some hydrocarbons were found in non-irradiated foods, particularly, in butter, cheese, tuna, and shrimp. Seven irradiated foods, butter, cheese, chicken, beef, pork, tuna, dry shrimp, and avocado were detectable at their practical doses by measuring the appropriate marker hydrocarbons. In most case, marker hydrocarbon will be 1,7-hexadecadiene. However, the marker hydrocarbons produced only in irradiated foods varied from food to food; therefore, it is necessary to check a specific irradiated food for marker hydrocarbons. On the other hand, two irradiated foods (papaya and mango which were irradiated at their practical doses) were difficult to distinguish from non-irradiated foods using this method. (author)

  14. Detection of hydrocarbons in irradiated foods

    Energy Technology Data Exchange (ETDEWEB)

    Miyahara, Makoto; Maitani, Tamio [National Inst. of Health Sciences, Tokyo (Japan); Saito, Akiko; Kamimura, Tomomi; Nagasawa, Taeko [Kitasato Univ., Sagamihara, Kanagawa (Japan). School of Allied Health Sciences; Kobayashi, Yasuo; Ito, Hitoshi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Establishment

    2003-06-01

    The hydrocarbon method for the detection of irradiated foods is now recognized as the international technique. This method is based on radiolysis of fatty acids in food to give hydrocarbons. In order to expand this technique's application, ten foods (butter, cheese, chicken, pork, beef, tuna, dry shrimp, avocado, papaya, and mango) were irradiated in the range from 0.5 to 10 kGy and the hydrocarbons in them were detected. Recoveries of the hydrocarbons from most foods were acceptable (38-128%). Some hydrocarbons were found in non-irradiated foods, particularly, in butter, cheese, tuna, and shrimp. Seven irradiated foods, butter, cheese, chicken, beef, pork, tuna, dry shrimp, and avocado were detectable at their practical doses by measuring the appropriate marker hydrocarbons. In most case, marker hydrocarbon will be 1,7-hexadecadiene. However, the marker hydrocarbons produced only in irradiated foods varied from food to food; therefore, it is necessary to check a specific irradiated food for marker hydrocarbons. On the other hand, two irradiated foods (papaya and mango which were irradiated at their practical doses) were difficult to distinguish from non-irradiated foods using this method. (author)

  15. Current status of food irradiation overseas. Data update from 2013

    International Nuclear Information System (INIS)

    Todoriki, Setsuko

    2015-01-01

    As the movement of international standards and specifications, the treatment standards related to food irradiation have been summarized on the basis of the ISPM 28 Annex PT-19 of International Plant Protection Convention. As the movement in the United States, there are the following tables: (1) food and radiation dose approved by FDA, (2) lowest radiation dose for the pests of each quarantine target stipulated by the USDA/APHIS as the plant quarantine authorities of the United States Department of Agriculture, (3) items and production sites of vegetables/fruits about which irradiation treatment in import phytosanitary has been approved by USDA, and (4) import volume of irradiated fruits into the United States. The following statistics have also been summarized: (1) materials and irradiation dose permitted FSANZ, which is the food safety regulatory authorities of Australia and New Zealand, and (2) irradiation-treated amount of each food in the EU territory in 2013, and treated amount in each country. In Asia, the amount and facilities of irradiation treatment are described for ten countries including China, Thailand, India, etc. As the contents of the Coordinated Research Programs (CRPs) of International Atomic Energy Agency (IAEA), the following are introduced: (1) three items including 'Development of generic irradiation doses for quarantine treatments,' and (2) three items of the contents of 'The Regional Cooperative Agreement for Research, Development and Training Related to Nuclear Science and Technology for Asia and the Pacific: RCA).' (A.O.)

  16. Food Irradiation Newsletter. V. 14, no. 2

    International Nuclear Information System (INIS)

    1990-12-01

    This issue reports specific training activities on Food Irradiation Process Control School, both for technical supervisors of irradiation facilities and food control officials/inspectors, and summary reports of Workshops on dosimetry techniques for food irradiation and on techno-economic feasibility of food irradiation for Latin American countries are included. After 12 years of operation, the International Facility for Food Irradiation Technology (IFFIT) will cease to function after 31 December 1990. This issue reports the last inter-regional training course organized by IFFIT, and also features reports on food irradiation in Asia. Active developments in the field in several Asian countries may be found in the reports of the Workshop on the Commercialization of Food Irradiation, Shanghai, and the Research Co-ordination Meeting on the Asian Regional Co-operative Project on Food Irradiation (with emphasis on acceptance and process control), Bombay. Status reports of programmes in these countries are also included. Refs and tabs

  17. Loss of photoreactivation in UV-irradiated cultured fish cells under different conditions

    Energy Technology Data Exchange (ETDEWEB)

    Mano, Y.; Kator, K.; Egami, N. (Tokyo Univ. (Japan). Faculty of Science)

    1982-05-01

    CAF-MM1 cells derived from a goldfish have photoreactivability for the damage induced by ultraviolet light. When UV-irradiated cells were incubated in the dark at 26/sup 0/C, the longest interval in which photoreactivation (PR) was observed, measured by colony formation technique, was about 30h after the UV irradiation. However, if the cells were incubated at 20/sup 0/C, the effective time was prolonged. Since each time appeared to correspond to the doubling time of the cells at each temperature, the loss of photoreactivability is suggested to be closely related to cell growth or progression of cell cycle. The loss of PR was not observed in the cells held in confluence up to 48h after UV irradiation. Photoreactivating enzyme in growing CAF-MM1 cells incubated in the dark for 24h after UV irradiation was shown to be active, so that it is not possible that the cause of the loss of PR is change in the activity of photoreactivating enzyme.

  18. Larger-scale irradiation and marketing studies on onions. Part of a coordinated programme on pre-commercial scale radiation treatment of food

    International Nuclear Information System (INIS)

    Kalman, B.

    1982-08-01

    Seed grown onions of ''Alsogodi'' variety were harvested manually, partially defoliated, irradiated with a dose of 50 Gy at a throughput of 6 tons per hour in a pilot-irradiator specially designed for onions, and then stored at ambient conditions of temperature and humidity, together with non-irradiated onions. Texture, density, growth of inner bud, colour, storage losses and quality were determined. Results clearly demonstrated that irradiation for sprout inhibition has a favourable effect on maintaining good texture of onions during storage. By inhibiting the sprouting, no internal discolouration of the bud occurred during storage. This is important for the quality of fresh onions as well as for that of the final dried product, processed from fresh onions after various periods of storage. Due to sub-optimal initial quality of the onions and unsatisfactory control of storage conditions, total storage losses were too high, compared to the results of previous experiments. Yet, the beneficial effect of irradiation was demonstrated at the end of the considered storage period, since 55% of the irradiated and only 10% of the non-irradiated commodities were of acceptable marketing quality. Cost calculation based on 80% utilization of the pilot irradiator used in this study resulted in a treatment cost of 0.25 forint per kg, which is approximately 8% of the average purchasing price of onions in Hungary

  19. Combining the Sterile Insect Technique with the Incompatible Insect Technique: III-Robust Mating Competitiveness of Irradiated Triple Wolbachia-Infected Aedes albopictus Males under Semi-Field Conditions.

    Science.gov (United States)

    Zhang, Dongjing; Lees, Rosemary Susan; Xi, Zhiyong; Bourtzis, Kostas; Gilles, Jeremie R L

    2016-01-01

    Combination of the sterile insect technique with the incompatible insect technique is considered to be a safe approach to control Aedes albopictus populations in the absence of an accurate and scalable sex separation system or genetic sexing strain. Our previous study has shown that the triple Wolbachia-infected Ae. albopictus strain (wAlbA, wAlbB and wPip) was suitable for mass rearing and females could be completely sterilized as pupae with a radiation dose of at least 28 Gy. However, whether this radiation dose can influence the mating competitiveness of the triple infected males was still unknown. In this study we aimed to evaluate the effects of irradiation on the male mating competitiveness of the triple infected strain under laboratory and semi-field conditions. The results herein indicate that irradiation with a lower, female-sterilizing dose has no negative impact on the longevity of triple infected males while a reduced lifespan was observed in the wild type males (wAlbA and wAlbB) irradiated with a higher male-sterilizing dose, in small cages. At different sterile: fertile release ratios in small cages, triple-infected males induced 39.8, 81.6 and 87.8% sterility in a wild type female population at 1:1, 5:1 and 10:1 release ratios, respectively, relative to a fertile control population. Similarly, irradiated triple infected males induced 31.3, 70.5 and 89.3% sterility at 1:1, 5:1 and 10:1 release ratios, respectively, again relative to the fertile control. Under semi-field conditions at a 5:1 release ratio, relative to wild type males, the mean male mating competitiveness index of 28 Gy irradiated triple-infected males was significantly higher than 35 Gy irradiated wild type males, while triple infected males showed no difference in mean mating competitiveness to either irradiated triple-infected or irradiated wild type males. An unexpected difference was also observed in the relative male mating competitiveness of the triple infected strain after

  20. Mechanical properties of irradiated beryllium

    International Nuclear Information System (INIS)

    Beeston, J.M.; Longhurst, G.R.; Wallace, R.S.

    1992-01-01

    Beryllium is planned for use as a neutron multiplier in the tritium breeding blanket of the International Thermonuclear Experimental Reactor (ITER). After fabricating samples of beryllium at densities varying from 80 to 100% of the theoretical density, we conducted a series of experiments to measure the effect of neutron irradiation on mechanical properties, especially strength and ductility. Samples were irradiated in the Advanced Test Reactor (ATR) to a neutron fluence of 2.6 x 10 25 n/m 2 (E > MeV) at an irradiation temperature of 75deg C. These samples were subsequently compression-tested at room temperature, and the results were compared with similar tests on unirradiated specimens. We found that the irradiation increased the strength by approximately four times and reduced the ductility to approximately one fourth. Failure was generally ductile, but the 80% dense irradiated samples failed in brittle fracture with significant generation of fine particles and release of small quantities of tritium. (orig.)

  1. Mechanical properties of irradiated beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Beeston, J.M.; Longhurst, G.R.; Wallace, R.S. (EG and G Idaho, Inc., Idaho Falls, ID (United States). Idaho National Engineering Lab.); Abeln, S.P. (EG and G Rocky Flats, Inc., Golden, CO (United States))

    1992-10-01

    Beryllium is planned for use as a neutron multiplier in the tritium breeding blanket of the International Thermonuclear Experimental Reactor (ITER). After fabricating samples of beryllium at densities varying from 80 to 100% of the theoretical density, we conducted a series of experiments to measure the effect of neutron irradiation on mechanical properties, especially strength and ductility. Samples were irradiated in the Advanced Test Reactor (ATR) to a neutron fluence of 2.6 x 10[sup 25] n/m[sup 2] (E > MeV) at an irradiation temperature of 75deg C. These samples were subsequently compression-tested at room temperature, and the results were compared with similar tests on unirradiated specimens. We found that the irradiation increased the strength by approximately four times and reduced the ductility to approximately one fourth. Failure was generally ductile, but the 80% dense irradiated samples failed in brittle fracture with significant generation of fine particles and release of small quantities of tritium. (orig.).

  2. Mechanical properties of irradiated beryllium

    Science.gov (United States)

    Beeston, J. M.; Longhurst, G. R.; Wallace, R. S.; Abeln, S. P.

    1992-10-01

    Beryllium is planned for use as a neutron multiplier in the tritium breeding blanket of the International Thermonuclear Experimental Reactor (ITER). After fabricating samples of beryllium at densities varying from 80 to 100% of the theoretical density, we conducted a series of experiments to measure the effect of neutron irradiation on mechanical properties, especially strength and ductility. Samples were irradiated in the Advanced Test Reactor (ATR) to a neutron fluence of 2.6 × 10 25 n/m 2 ( E > 1 MeV) at an irradiation temperature of 75°C. These samples were subsequently compression-tested at room temperature, and the results were compared with similar tests on unirradiated specimens. We found that the irradiation increased the strength by approximately four times and reduced the ductility to approximately one fourth. Failure was generally ductile, but the 80% dense irradiated samples failed in brittle fracture with significant generation of fine particles and release of small quantities of tritium.

  3. IFMIF, International Fusion Materials Irradiation Facility conceptual design activity cost report

    International Nuclear Information System (INIS)

    Rennich, M.J.

    1996-12-01

    This report documents the cost estimate for the International Fusion Materials Irradiation Facility (IFMIF) at the completion of the Conceptual Design Activity (CDA). The estimate corresponds to the design documented in the Final IFMIF CDA Report. In order to effectively involve all the collaborating parties in the development of the estimate, a preparatory meeting was held at Oak Ridge National Laboratory in March 1996 to jointly establish guidelines to insure that the estimate was uniformly prepared while still permitting each country to use customary costing techniques. These guidelines are described in Section 4. A preliminary cost estimate was issued in July 1996 based on the results of the Second Design Integration Meeting, May 20--27, 1996 at JAERI, Tokai, Japan. This document served as the basis for the final costing and review efforts culminating in a final review during the Third IFMIF Design Integration Meeting, October 14--25, 1996, ENEA, Frascati, Italy. The present estimate is a baseline cost estimate which does not apply to a specific site. A revised cost estimate will be prepared following the assignment of both the site and all the facility responsibilities

  4. Preliminary results of the International Fusion Materials Irradiation Facility deuteron injector

    Energy Technology Data Exchange (ETDEWEB)

    Gobin, R.; Adroit, G.; Bogard, D.; Bourdelle, G.; Chauvin, N.; Delferriere, O.; Gauthier, Y.; Girardot, P.; Guiho, P.; Harrault, F.; Jannin, J. L.; Loiseau, D.; Mattei, P.; Roger, A.; Sauce, Y.; Senee, F.; Vacher, T. [Commissariat a l' Energie Atomique et aux Energie Alternatives, CEA/Saclay, DSM/IRFU, 91191-Gif/Yvette (France)

    2012-02-15

    In the framework of the IFMIF-EVEDA project (International Fusion Materials Irradiation Facility-Engineering Validation and Engineering Design Activities), CEA/IRFU is in charge of the design, construction, and characterization of the 140 mA continuous deuteron injector, including the source and the low energy beam line. The electron cyclotron resonance ion source which operates at 2.45 GHz is associated with a 4-electrode extraction system in order to minimize beam divergence at the source exit. Krypton gas injection is foreseen in the 2-solenoid low energy beam line. Such Kr injection will allow reaching a high level of space charge compensation in order to improve the beam matching at the radio frequency quadrupole (RFQ) entrance. The injector construction is now completed on the Saclay site and the first plasma and beam production has been produced in May 2011. This installation will be tested with proton and deuteron beams either in pulsed or continuous mode at Saclay before shipping to Japan. In this paper, after a brief description of the installation, the preliminary results obtained with hydrogen gas injection into the plasma chamber will be reported.

  5. Irradiation of dehydrated vegetables

    International Nuclear Information System (INIS)

    Esterhuyse, A; Esterhuizen, T.

    1985-01-01

    The reason for radurization was to decreased the microbial count of dehydrated vegetables. The average absorbed irradiation dose range between 2kGy and 15kGy. The product catagories include a) Green vegetables b) White vegetables c) Powders of a) and b). The microbiological aspects were: Declining curves for the different products of T.P.C., Coliforms, E. Coli, Stap. areus, Yeast + Mold at different doses. The organoleptical aspects were: change in taste, flavour, texture, colour and moisture. The aim is the marketing of irradiated dehydrated vegetables national and international basis

  6. Irradiated fuel examination using the Cerenkov technique

    International Nuclear Information System (INIS)

    Nicholson, N.; Dowdy, E.J.

    1981-03-01

    A technique for monitoring irradiated nuclear fuel inventories located in water filled storage ponds has been developed and demonstrated. This technique provides sufficient qualitative information to be useful as a confirmatory technique to International Atomic Energy Agency inspectors. Measurements have been made on the Cerenkov glow light intensity from irradiated fuel that show the intensity of this light to be proportional to the cooling time. Fieldable instruments used in several tests confirm that such measurements can be made easily and rapidly, without fuel assembly movement or the introduction of apparatus into the storage ponds. The Cerenkov technique and instrumentation have been shown to be of potential use to operators of reactor spent fuel facilities and away from reactor storage facilities, and to the International Atomic Energy Agency inspectors who provide surveillance of the irradiated fuel stored in these facilities

  7. Recent progress in food preservation by irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Vas, K [Food and Agriculture Organization of the United Nations, Rome (Italy)

    1977-01-01

    The possible use of ionizing radiations in food preservation is discussed. It has been recognized that treatment of foods with ionizing radiations not only serves the purpose of stabilizing them in their original state, but may also enhance the hygienic properties of certain foodstuffs. Several examples conerning improvements in food quality and preservation by irradiation in different countries have been reported. The economic viewpoint and the possibilities for use of irradiated products in international trade are discussed. The development of international cooperation in sharing of research results and information and sharing of costs of wholesomeness testing have been pointed out.

  8. Recent progress in food preservation by irradiation

    International Nuclear Information System (INIS)

    Vas, K.

    1977-01-01

    The possible use of ionizing radiations in food preservation is discussed. It has been recognized that treatment of foods with ionizing radiations not only serves the purpose of stabilizing them in their original state, but may also enhance the hygienic properties of certain foodstuffs. Several examples conerning improvements in food quality and preservation by irradiation in different countries have been reported. The economic viewpoint and the possibilities for use of irradiated products in international trade are discussed. The development of international cooperation in sharing of research results and information and sharing of costs of wholesomeness testing have been pointed out. (G.C.)

  9. Food irradiation in perspective

    International Nuclear Information System (INIS)

    Henon, Y.M.

    1995-01-01

    Food irradiation already has a long history of hopes and disappointments. Nowhere in the world it plays the role that it should have, including in the much needed prevention of foodborne diseases. Irradiated food sold well wherever consumers were given a chance to buy them. Differences between national regulations do not allow the international trade of irradiated foods. While in many countries food irradiation is still illegal, in most others it is regulated as a food additive and based on the knowledge of the sixties. Until 1980, wholesomeness was the big issue. Then the ''prerequisite'' became detection methods. Large amounts of money have been spent to design and validate tests which, in fact, aim at enforcing unjustified restrictions on the use of the process. In spite of all the difficulties, it is believed that the efforts of various UN organizations and a growing legitimate demand for food safety should in the end lead to recognition and acceptance. (Author)

  10. Ion irradiation to simulate neutron irradiation in model graphites: Consequences for nuclear graphite

    Science.gov (United States)

    Galy, N.; Toulhoat, N.; Moncoffre, N.; Pipon, Y.; Bérerd, N.; Ammar, M. R.; Simon, P.; Deldicque, D.; Sainsot, P.

    2017-10-01

    Due to its excellent moderator and reflector qualities, graphite was used in CO2-cooled nuclear reactors such as UNGG (Uranium Naturel-Graphite-Gaz). Neutron irradiation of graphite resulted in the production of 14C which is a key issue radionuclide for the management of the irradiated graphite waste. In order to elucidate the impact of neutron irradiation on 14C behavior, we carried out a systematic investigation of irradiation and its synergistic effects with temperature in Highly Oriented Pyrolitic Graphite (HOPG) model graphite used to simulate the coke grains of nuclear graphite. We used 13C implantation in order to simulate 14C displaced from its original structural site through recoil. The collision of the impinging neutrons with the graphite matrix carbon atoms induces mainly ballistic damage. However, a part of the recoil carbon atom energy is also transferred to the graphite lattice through electronic excitation. The effects of the different irradiation regimes in synergy with temperature were simulated using ion irradiation by varying Sn(nuclear)/Se(electronic) stopping power. Thus, the samples were irradiated with different ions of different energies. The structure modifications were followed by High Resolution Transmission Electron Microscopy (HRTEM) and Raman microspectrometry. The results show that temperature generally counteracts the disordering effects of irradiation but the achieved reordering level strongly depends on the initial structural state of the graphite matrix. Thus, extrapolating to reactor conditions, for an initially highly disordered structure, irradiation at reactor temperatures (200 - 500 °C) should induce almost no change of the initial structure. On the contrary, when the structure is initially less disordered, there should be a "zoning" of the reordering: In "cold" high flux irradiated zones where the ballistic damage is important, the structure should be poorly reordered; In "hot" low flux irradiated zones where the ballistic

  11. Food irradiation: its role in food safety

    International Nuclear Information System (INIS)

    Qureshi, R. U.

    1985-01-01

    There are food safety criteria generally defined by international groups and specifically defined by individual countries. Food irradiation will be discussed in the light of food safety regulations. The merits and acceptability of food irradiation in promoting trade within and between countries will also be discussed. The need for public awareness and training of technical personnel will be highlighted

  12. Food irradiation: its role in food safety

    Energy Technology Data Exchange (ETDEWEB)

    Qureshi, R U

    1986-12-31

    There are food safety criteria generally defined by international groups and specifically defined by individual countries. Food irradiation will be discussed in the light of food safety regulations. The merits and acceptability of food irradiation in promoting trade within and between countries will also be discussed. The need for public awareness and training of technical personnel will be highlighted

  13. Irradiation embrittlement of pressure vessel steels

    International Nuclear Information System (INIS)

    Brumovsky, M.; Vacek, M.

    1975-01-01

    A Standard Research Programme on Irradiation Embrittlement of Pressure Vessel Steels was approved by the Coordinating Meeting on the 12th May 1972 at the Working Group on Engineering Aspects of Irradiation Embrittlement of Pressure Vessel Steels. This Working Group was set up by the International Atomic Energy Agency in Vienna. Seven countries with their research institutes agreed on doing irradiation experiments according to the approved programme on steel A533 B from the U.S. HSST Programme. The Czechoslovak contribution covering tensile and impact testing of non-irradiated steel and steel irradiated at 280degC to 1.3 x 10 23 n/m 2 (E above 1 MeV) is presented in this report. As an additional part the same set of experiments was carried out on two additional steels - A 542 and A 543, made in SKODA Works for comparison of their irradiation embrittlement and hardening with A533 B steel. (author)

  14. Formation condition of internal transport barrier in JT-60U plasmas

    International Nuclear Information System (INIS)

    Koide, Y.; Fujita, T.; Takizuka, T.; Shirai, H.; Hatae, T.; Isayama, A.; Isei, N.; Sakamoto, Y.; Kamada, Y.; Kikuchi, M.

    2001-01-01

    Onset condition of Internal Transport Barrier (ITB) in reversed shear discharges was investigated. Local values of electron density, electron temperature, and ion temperature seem not to be essential for the ITB onset. Remarkable correlation between electron temperature gradient and magnetic shear was observed at the onset. In addition, ITB well outside the q-minimum position was found. Its onset condition seems to be continuous with that observed in negative shear region. (author)

  15. [THE HYGIENIC CONDITIONS OF THE INTERNAL ENVIRONMENT OF SYLVINITE CHAMBERS OF VARIOUS MODIFICATIONS].

    Science.gov (United States)

    Barannikov, V G; Kirichenko, L V; Rusanova, E A; Dement'ev, S V; Vaĭsman, Ia I

    2015-01-01

    The performed comparative physiological-hygienic assessment of the conditions of the internal environment of salt sylvinite structures allowed to establish the complex of physical factors that have a favorable influence on the functional condition of the basic systems of the organism of patients.

  16. Examination of some protective conditions on technological properties of irradiated food grade polysaccharides

    Energy Technology Data Exchange (ETDEWEB)

    Adeil Pietranera, M.S. E-mail: pietrane@cae.cnea.gov.ar; Narvaiz, P. E-mail: narvaiz@cae.cnea.gov.ar

    2001-02-01

    Corn and cassava starches, agar-agar and kappa carrageenan, polysaccharides used as food additives, were gamma irradiated with doses suitable for microbial decontamination. Starches were analysed in paste and pudding viscosity and paper chromatography; agar and carrageenan, in viscosity and compression tests on gels and custards. Afterwards, substances were added to verify whether they could prevent irradiation technological impairment. Results revealed significant differences between control and irradiated samples in most determinations. No added substance was able to protect the functional properties of these additives. (author)

  17. Radionuclides release from re-irradiated fuel under high temperature and pressure conditions. Gamma-ray measurements of VEGA-5 test

    Energy Technology Data Exchange (ETDEWEB)

    Hidaka, Akihide; Kudo, Tamotsu; Nakamura, Takehiko; Kanazawa, Toru; Kiuchi, Toshio; Uetsuka, Hiroshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2003-03-01

    The VEGA (Verification Experiments of radionuclides Gas/Aerosol release) program is being performed at JAERI to clarify mechanisms of radionuclides release from irradiated fuel during severe accidents and to improve source term predictability. The fifth VEGA-5 test was conducted in January 2002 to confirm the reproducibility of decrease in cesium release under elevated pressure that was observed in the VEGA-2 test and to investigate the release behavior of short-life radionuclides. The PWR fuel of 47 GWd/tU after about 8.2 years of cooling was re-irradiated at Nuclear Safety Research Reactor (NSRR) for 8 hours before the heat-up test. After that, the two pellets of 10.9 g without cladding were heated up to about 2,900 K at 1.0 MPa under the inert He condition. The experiment reconfirmed the decrease in cesium release rate under the elevated pressure. The release data on short-life radionuclides such as Ru-103, Ba-140 and Xe-133 that have never been observed in the previous VEGA tests without re-irradiation was obtained using the {gamma} ray measurement. (author)

  18. Irradiated Foods Detection by Thermoluminescence (TL) and DEFT/APC Analysis

    International Nuclear Information System (INIS)

    Choi, I.D.; Kang, E.K.; Yang, J.S.

    2004-01-01

    Irradiated food detection methods such as Thermoluminescence (TL) and Direct Epifluorescent Filter Technique and Aerobic Plate Count (DEFT/APC) methods were evaluated. Fresh green-onion, onion, and ginger were irradiated at 0, 0.3, 0.6, and 0.9 kGy. Difference in log DEFT/APC units between irradiated and un-irradiated samples was less than 2 long units, below the average threshold value (3-4 long units) of international researches

  19. The effect of low energy helium ion irradiation on tungsten-tantalum (W-Ta) alloys under fusion relevant conditions

    Science.gov (United States)

    Gonderman, S.; Tripathi, J. K.; Novakowski, T. J.; Sizyuk, T.; Hassanein, A.

    2017-08-01

    Currently, tungsten remains the best candidate for plasma-facing components (PFCs) for future fusion devices because of its high melting point, low erosion, and strong mechanical properties. However, continued investigation has shown tungsten to undergo severe morphology changes under fusion-like conditions. These results motivate the study of innovative PFC materials which are resistant to surface morphology evolution. The goal of this work is to examine tungsten-tantalum (W-Ta) alloys, a potential PFC material, and their response to low energy helium ion irradiation. Specifically, W-Ta samples are exposed to 100 eV helium irradiations with a flux of 1.15 × 1021 ions m-2 s-1, at 873 K, 1023 K, and 1173 K for 1 h duration. Scanning electron microscopy (SEM) reveals significant changes in surface deterioration due to helium ion irradiation as a function of both temperature and tantalum concentration in W-Ta samples. X-Ray Diffraction (XRD) studies show a slight lattice parameter expansion in W-Ta alloy samples compared to pure W samples. The observed lattice parameter expansion in W-Ta alloy samples (proportional to increasing Ta wt.% concentrations) reflect significant differences observed in the evolution of surface morphology, i.e., fuzz development processes for both increasing Ta wt.% concentration and target temperature. These results suggest a correlation between the observed morphology differences and the induced crystal structure change caused by the presence of tantalum. Shifts in the XRD peaks before and after 100 eV helium irradiation with a flux of 1.15 × 1021 ions m-2 s-1, 1023 K, for 1 h showed a significant difference in the magnitude of the shift. This has suggested a possible link between the atomic spacing of the material and the accumulated damage. Ongoing research is needed on W-Ta alloys and other innovative materials for their application as irradiation resistant materials in future fusion or irradiation environments.

  20. Gamma-irradiation of wet corn. Microbiological aspects

    International Nuclear Information System (INIS)

    Poisson, Jeanne; Cahagnier, B.

    1973-01-01

    In the course of a survey of several years work on microbiological decontamination and control of wet corn by gamma-irradiation the following factors are studied: inhibiting and selective effect of gamma-irradiation (100 to 500krads) on the microflora of grains; evolution of residual microflora of irradiated wet grains (moisture content about 35%), during storage experiments under ventilated or airtight conditions. Two important points emerge from those studies. The microflora which develops on irradiated sample is much less varied than that of the control sample. The microbial population of an irradiated sample rises up in a few days on a level with the initial one of the control, then goes on increasing while remaining, as a rule, slightly inferior to that of the control placed under the same conditions. This greatly lowers the practical interest of irradiation, which can only be used together with another treatment able to inhibit the quick growth of the residual microflora [fr

  1. IFMIF (International Fusion Materials Irradiation Facility) key element technology phase task description

    Energy Technology Data Exchange (ETDEWEB)

    Ida, M.; Nakamura, H.; Sugimoto, M.; Yutani, T.; Takeuchi, H. [eds.] [Japan Atomic Energy Research Inst., Tokai Research Establishment, Fusion Neutron Laboratory, Tokai, Ibaraki (Japan)

    2000-08-01

    In 2000, a 3 year Key Element technology Phase (KEP) of the International Fusion Materials Irradiation Facility (IFMIF) has been initiated to reduce the key technology risk factors needed to achieve continuous wave (CW) beam with the desired current and energy and to reach the corresponding power handling capabilities in the liquid lithium target system. In the KEP, the IFMIF team (EU, Japan, Russian Federation, US) will perform required tasks. The contents of the tasks are described in the task description sheet. As the KEP tasks, the IFMIF team have proposed 27 tasks for Test Facilities, 12 tasks for Target, 26 tasks for Accelerator and 18 tasks for Design Integration. The task description by RF is not yet available. The task items and task descriptions may be added or revised with the progress of KEP activities. These task description sheets have been compiled in this report. After 3 years KEP, the results of the KEP tasks will be reviewed. Following the KEP, 3 years Engineering Validation Phase (EVP) will continue for IFMIF construction. (author)

  2. IFMIF (International Fusion Materials Irradiation Facility) conceptual design activity reduced cost report

    International Nuclear Information System (INIS)

    2000-02-01

    This report describes the results of a preliminary reevaluation of the design and cost of the International Fusion Materials Irradiation Facility (IFMIF) Project in response to the request from the 28th FPCC meeting in January 1999. Two major ideas have been considered: 1) reduction of the total construction cost through elimination of the previously planned facility upgrade and 2) a facility deployment in 3 stages with capabilities for limited experiments in the first stage. As a result, the size and complexity of the facility could be significantly reduced, leading to substantial cost savings. In addition to these two ideas, this study also included a critical review of the original CDA specification with the objective of elimination of nonessential items. For example, the number of lithium targets was reduced from two to one. As a result of these changes in addition to the elimination of the upgrade, the total cost estimate was very substantially reduced from 797.2 MICF to 487.8 MICF, where 1 MICF = 1 Million of the IFMIF Conversion Units (approximately $1M US January, 1996). (author)

  3. Materials irradiation research in neutron science

    Energy Technology Data Exchange (ETDEWEB)

    Noda, Kenji; Oyama, Yukio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-11-01

    Materials irradiation researches are planned in Neutron Science Research Program. A materials irradiation facility has been conceived as one of facilities in the concept of Neutron Science Research Center at JAERI. The neutron irradiation field of the facility is characterized by high flux of spallation neutrons with very wide energy range up to several hundred MeV, good accessibility to the irradiation field, good controllability of irradiation conditions, etc. Extensive use of such a materials irradiation facility is expected for fundamental materials irradiation researches and R and D of nuclear energy systems such as accelerator-driven incineration plant for long-lifetime nuclear waste. In this paper, outline concept of the materials irradiation facility, characteristics of the irradiation field, preliminary technical evaluation of target to generate spallation neutrons, and materials researches expected for Neutron Science Research program are described. (author)

  4. Post-Irradiation Examination of Fuel Pin R54-F20A, Irradiated in a NaK Environment. RCN Report

    International Nuclear Information System (INIS)

    Kwast, H.

    1972-12-01

    Fuel pin R54-F20A has been irradiated in a NaK-environment. Temperature measurements in the NaK were carried out at average linear fission powers of 552 and 825 W/cm respectively. A maximum average canning temperature of 920°C was reached. The fuel pin was irradiated for about 50 minutes at the maximum irradiation conditions, while the total irradiation time was two hours. The irradiation had to be broken off before the end condition was reached because of malfunctioning of the fuelfailure detection system. No power peaking did occur at the upper and lower interfaces between the 50%-enriched UO 2 - and the natural UO 2 + 8 w/o UB 4 pellet. About 35% of the fuel has molten, but the fuel pin did not fail. The irradiation has been carried out in the Poolside Facility (PSF) of the High Flux Reactor (HFR) at Petten. (author)

  5. The Next Spaceflight Solar Irradiance Sensor: TSIS

    Science.gov (United States)

    Kopp, Greg; Pilewskie, Peter; Richard, Erik

    2016-05-01

    The Total and Spectral Solar Irradiance Sensor (TSIS) will continue measurements of the solar irradiance with improved accuracies and stabilities over extant spaceflight instruments. The two TSIS solar-observing instruments include the Total Irradiance Monitor (TIM) and the Spectral Irradiance Monitor (SIM) for measuring total- and spectral- solar-irradiance, respectively. The former provides the net energy powering the Earth’s climate system while the latter helps attribute where that energy is absorbed by the Earth’s atmosphere and surface. Both spaceflight instruments are assembled and being prepared for integration on the International Space Station. With operations commencing in late 2017, the TSIS is intended to overlap with NASA’s ongoing SOlar Radiation and Climate Experiment (SORCE) mission, which launched in 2003 and contains the first versions of both the TIM and SIM instruments, as well as with the TSI Calibration Transfer Experiment (TCTE), which began total solar irradiance measurements in 2013. We summarize the TSIS’s instrument improvements and intended solar-irradiance measurements.

  6. Irradiation Performance of HTGR Fuel in WWR-K Research Reactor

    International Nuclear Information System (INIS)

    Ueta, Shohei; Sakaba, Nariaki; Shaimerdenov, Asset; Gizatulin, Shamil; Chekushina, Lyudmila; Chakrov, Petr; Honda, Masaki; Takahashi, Masashi; Kitagawa, Kenichi

    2014-01-01

    A capsule irradiation test with the high temperature gas-cooled reactor (HTGR) fuel is being carried out using WWR-K research reactor in the Institute of Nuclear Physics of the Republic of Kazakhstan (INP) to attain 100 GWd/t-U of burnup under normal operating condition of a practical small-sized HTGR. This is the first HTGR fuel irradiation test for INP in Kazakhstan collaborated with Japan Atomic Energy Agency (JAEA) in frame of International Science and Technology Center (ISTC) project. In the test, TRISO coated fuel particle with low-enriched UO_2 (less than 10 % of "2"3"5U) is used, which was newly designed by JAEA to extend burnup up to 100 GWd/t-U comparing with that of the HTTR (33 GWd/t-U). Both TRISO and fuel compact as the irradiation test specimen were fabricated in basis of the HTTR fuel technology by Nuclear Fuel Industries, Ltd. in Japan. A helium-gas-swept capsule and a swept-gas sampling device installed in WWR-K were designed and constructed by INP. The irradiation test has been started in October 2012 and will be completed up to the end of February 2015. The irradiation test is in the progress up to 69 GWd/t of burnup, and integrity of new TRISO fuel has been confirmed. In addition, as predicted by the fuel design, fission gas release was observed due to additional failure of as-fabricated SiC-defective fuel. (author)

  7. Photoreactivation of thymine dimers in uv-irradiated human cells: unique dependence on culture conditions

    Energy Technology Data Exchange (ETDEWEB)

    Mortelmans, K; Friedberg, E C [Stanford Univ., Calif. (USA). Dept. of Pathology. Lab. of Experimental Oncology; Cleaver, J E; Thomas, G H [California Univ., San Francisco (USA). Lab. of Radiobiology; Paterson, M C; Smith, B P [Atomic Energy of Canada Ltd., Chalk River, Ontario. Biology and Health Physics Div. Chalk River Nuclear Labs.

    1977-09-01

    UV-irradiated human fibroblasts in tissue culture were exposed to photoreactivating light in an attempt to demonstrate a light-dependent loss of thymine dimers from the acid-insoluble fraction of the DNA. The only experimental conditions in which this phenomenon was observed was if the cells were grown for at least 10 days in Dulbecco's modified Eagle's minimum essential medium. Such cells lost a maximum of between 10 to 30% of the thymine dimers from their DNA during illumination for 1 h. When cells were grown in a variety of other media, this phenomenon was not observed. The present experiments do not discriminate between true enzymatic photoreactivation and a medium-dependent photosensitization phenomenon that is not enzymatic in nature.

  8. Proceedings of a seminar on food irradiation

    International Nuclear Information System (INIS)

    1985-07-01

    International interest in the industrial use of ionizing radiation as a means of food preservation has increased rapidly following the favourable outcome of many years of intensive research on the health implications of food irradiation. The introduction in the U.S. and elsewhere of legislation restricting the use of chemical additives to foods for both human and animal consumption has contributed to this development. A high priority must be given to coordinating legislation on food irradiation within the European Community if international trade in irradiated foods is to make progress and food losses by spoilage and by insect infestation are to be minimised. Speakers from the United Kigdom, France and Germany describe the legislative and developmental situation in their respective countries. The implication for the Irish food industry is presented by scientists working on food research and development and regulatory aspects in Ireland are also discussed

  9. Global trends of acceptance and trade in irradiated foods

    Energy Technology Data Exchange (ETDEWEB)

    Matin, M A [Food and Environmental Protection Section, Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, International Atomic Energy Agency, Vienna (Austria)

    2001-05-01

    Issues as relevant to wide scale application of food irradiation are presented in this paper to provide current status of the technology. Global development on key issues such as public acceptance, public health improvement, safety and wholesomeness, regulatory aspects, potential application of the technology to ease quarantine problems in the trade of food and agricultural commodities as a viable alternative to fumigation with methyl bromide have been presented. Irradiation ensures the hygienic quality of food and extends shelf-life. Many international organizations and respected regional/national bodies agree on the merits of the technique and valuable contribution that the process can offer to safeguard the food supply worldwide. Codex General Standard for irradiated food and the associated Code of Practice for operation of the irradiation facilities used for the treatment of foods adopted in 1983 forms the regulatory basis for commercial utilization of the processing technology. More than 40 countries of the world have Standards/Regulations to process one or more food products by the irradiation process. Efforts are underway to harmonise national regulations on food irradiation to remove obstacles for international trade of irradiated products. There is a rapid development on commercial application of food irradiation in the USA and elsewhere in the past few months. There are already several existing commercial irradiators available for treating food in the USA and many more are planned to be built. Such commercial food irradiation facilities are also in different stage of development in Brazil, India, Mexico, Thailand, People's Republic of China, Republic of Korea. Roles of irradiation ensuring food safety, contributing food security and facilitating trade are more and more recognized in developed and developing countries alike. (author)

  10. Global trends of acceptance and trade in irradiated foods

    International Nuclear Information System (INIS)

    Matin, M.A.

    2001-01-01

    Issues as relevant to wide scale application of food irradiation are presented in this paper to provide current status of the technology. Global development on key issues such as public acceptance, public health improvement, safety and wholesomeness, regulatory aspects, potential application of the technology to ease quarantine problems in the trade of food and agricultural commodities as a viable alternative to fumigation with methyl bromide have been presented. Irradiation ensures the hygienic quality of food and extends shelf-life. Many international organizations and respected regional/national bodies agree on the merits of the technique and valuable contribution that the process can offer to safeguard the food supply worldwide. Codex General Standard for irradiated food and the associated Code of Practice for operation of the irradiation facilities used for the treatment of foods adopted in 1983 forms the regulatory basis for commercial utilization of the processing technology. More than 40 countries of the world have Standards/Regulations to process one or more food products by the irradiation process. Efforts are underway to harmonise national regulations on food irradiation to remove obstacles for international trade of irradiated products. There is a rapid development on commercial application of food irradiation in the USA and elsewhere in the past few months. There are already several existing commercial irradiators available for treating food in the USA and many more are planned to be built. Such commercial food irradiation facilities are also in different stage of development in Brazil, India, Mexico, Thailand, People's Republic of China, Republic of Korea. Roles of irradiation ensuring food safety, contributing food security and facilitating trade are more and more recognized in developed and developing countries alike. (author)

  11. Photodegradation of the azole fungicide climbazole by ultraviolet irradiation under different conditions: Kinetics, mechanism and toxicity evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Wang-Rong; Ying, Guang-Guo, E-mail: guang-guo.ying@gig.ac.cn; Zhao, Jian-Liang; Liu, You-Sheng; Hu, Li-Xin; Yao, Li; Liang, Yan-Qiu; Tian, Fei

    2016-11-15

    Highlights: • Climbazole (CZ) could be effectively degraded under UV-254 irradiation. • CZ underwent direct and self-sensitized photolysis involving ROS. • The main photodegradation by-products of CZ were identified and semi-quantitated. • Pathway includes hydroxylative dechlorination, dechlorination, and de-pinacolone. • The toxicity of the photodegradation system reduced after UV-254 irradiation. - Abstract: Climbazole (CZ) has been known to persist in various environmental media, and may cause potential risks to aquatic organisms. This study investigated the photodegradation of CZ by ultraviolet (UV, 254 nm) under different conditions. The results revealed that CZ could be effectively degraded in aqueous solutions under UV-254 irradiation with a half-life of 9.78 min (pH = 7.5), and the photodegradation followed pseudo-first-order kinetics. pH had almost no effect on its rate constants and quantum yields; but the water quality of natural waters could affect the photolysis of CZ, and the coexisting constituents such as Fe{sup 3+}, NO{sub 3}{sup −}, and HA obviously inhibited its photolysis. The addition of different radical scavengers also inhibited the photodegradation of CZ due to the reduction of reactive oxygen species (ROS). CZ underwent direct and self-sensitized photolysis involving ROS. Based on the identified photodegradation by-products, the proposed pathways included hydroxylative dechlorination, dechlorination and de-pinacolone. Moreover, toxicity evaluation using duckweed found significant toxicity reduction in the photodegradation system of CZ after the irradiation of UV-254, and the remaining by-products did not pose extra toxicity compared with CZ itself. These findings from present study suggest that CZ in effluent could be further reduced by applying UV photolysis treatment.

  12. Nitrogen compounds behavior under irradiation environment

    International Nuclear Information System (INIS)

    Ichikawa, Nagayoshi; Takagi, Junichi; Yotsuyanagi, Tadasu

    1991-01-01

    Laboratory experiments were performed to evaluate nitrogen compounds behavior in liquid phase under irradiation environments. Nitrogen compounds take a chemical form of ammonium ion under reducing condition by gamma irradiation, whereas ammonium ions are rather stable even under oxidizing conditions. Key reactions were pointed out and their reaction rate constants and activation energies were estimated through computer code simulation. A reaction scheme for nitrogen compounds including protonate reaction was proposed. (author)

  13. Irradiation Behavior and Post-Irradiation Examinations of an Acoustic Sensor Using a Piezoelectric Transducer

    International Nuclear Information System (INIS)

    Lambert, T.; Zacharie-Aubrun, I.; Hanifi, K.; Valot, Ch.; Fayette, L.; Rosenkantz, E.; Ferrandis, J.Y.; Tiratay, X.

    2013-06-01

    The development of advanced instrumentation for in-pile experiments in Material Testing Reactor constitutes a main goal for the improvement of the nuclear fuel behavior knowledge. In the framework of high burn-up fuel experiments under transient operating conditions, an innovative sensor based on acoustic method was developed by CEA and IES (Southern Electronic Institute).This sensor is used to determine the on-line composition of the gases located in fuel rodlet free volume and thus, allows calculating the molar fractions of fission gases and helium. The main principle of the composition determination by acoustic method consists in measuring the time of flight of an acoustic signal emitted and reflected in a specific cavity. A piezoelectric transducer, driven by a pulse generator, generates the acoustic wave in the cavity. The piezoelectric transducer is a PZT ceramic disk, mainly consisting of lead, zirconium and titanium. This acoustic method was tested with success during a first experiment called REMORA 3, and the results were used to differentiate helium and fission gas release kinetics under transient operating conditions. However, during the irradiation test, acoustic signal degradation was observed, mainly due to irradiation effect but also due to the increasing of the gas temperature. Despite this acoustic signal degradation, the time of flight measurements were carried out with good accuracy throughout the test, thanks to the development of a more efficient signal processing. After experiment, neutronic calculations were performed in order to determine neutron fluence at the level of the piezoelectric transducer. In order to have a better understanding of the acoustic sensor behavior under irradiation, Post Irradiation Examination program was done on piezoelectric transducer and on acoustic coupling material too. These examinations were also realized on a non-irradiated acoustic sensor built in the same conditions and with the same materials and the same

  14. Dose Distribution of Gamma Irradiators

    International Nuclear Information System (INIS)

    Park, Seung Woo; Shin, Sang Hun; Son, Ki Hong; Lee, Chang Yeol; Kim, Kum Bae; Jung, Hai Jo; Ji, Young Hoon

    2010-01-01

    Gamma irradiator using Cs-137 have been widely utilized to the irradiation of cell, blood, and animal, and the dose measurement and education. The Gamma cell 3000 Elan (Nordion International, Kanata, Ontario, Canada) irradiator was installed in 2003 with Cs-137 and dose rate of 3.2 Gy/min. And the BioBeam 8000 (Gamma-Service Medical GmbH, Leipzig, Germany) irradiator was installed in 2008 with Cs-137 and dose rate of 3.5 Gy/min. Our purpose was to evaluate the practical dosimetric problems associated with inhomogeneous dose distribution within the irradiated volume in open air state using glass dosimeter and Gafchromic EBT film dosimeter for routine Gamma irradiator dosimetry applications at the KIRAMS and the measurements were compared with each other. In addition, an user guideline for useful utilization of the device based on practical dosimetry will be prepared. The measurement results of uniformity of delivered dose within the device showed variation more than 14% between middle point and the lowest position at central axis. Therefore, to maintain dose variation within 10%, the criteria of useful dose distribution, for research radiation effects, the irradiated specimen located at central axis of the container should be placed within 30 mm from top and bottom surface, respectively. In addition, for measurements using the film, the variations of dose distribution were more then 50% for the case of less than 10 second irradiation, mostly within 20% for the case of more than 20 second irradiation, respectively. Therefore, the irradiation experiments using the BioBeam 8000 irradiator are recommended to be used for specimen required at least more than 20 second irradiation time.

  15. Dose Calculation Evolution for Internal Organ Irradiation in Humans

    International Nuclear Information System (INIS)

    Jimenez V, Reina A.

    2007-01-01

    The International Commission of Radiation Units (ICRU) has established through the years, a discrimination system regarding the security levels on the prescription and administration of doses in radiation treatments (Radiotherapy, Brach therapy, Nuclear Medicine). The first level is concerned with the prescription and posterior assurance of dose administration to a point of interest (POI), commonly located at the geometrical center of the region to be treated. In this, the effects of radiation around that POI, is not a priority. The second level refers to the dose specifications in a particular plane inside the patient, mostly the middle plane of the lesion. The dose is calculated to all the structures in that plane regardless if they are tumor or healthy tissue. In this case, the dose is not represented by a point value, but by level curves called 'isodoses' as in a topographic map, so you can assure the level of doses to this particular plane, but it also leave with no information about how this values go thru adjacent planes. This is why the third level is referred to the volumetrical description of doses so these isodoses construct now a volume (named 'cloud') that give us better assurance about tissue irradiation around the volume of the lesion and its margin (sub clinical spread or microscopic illness). This work shows how this evolution has resulted, not only in healthy tissue protection improvement but in a rise of tumor control, quality of life, better treatment tolerance and minimum permanent secuelae

  16. Status of IAEA international data base on irradiated graphite properties with respect to HTR engineering issues

    International Nuclear Information System (INIS)

    Hacker, P.J.; Haag, G.

    2002-01-01

    The International Database on Irradiated Nuclear Graphite Properties contains data on the physical, chemical, mechanical and other relevant properties of graphites. Its purpose is to provide a platform that makes these properties accessible to approved users in the fields of nuclear power, nuclear safety and other nuclear science and technology applications. The database is constructed using Microsoft Access 97 software and has a controlled distribution by CD ROM to approved users. This paper describes the organisation and management of the database through administrative arrangements approved by the IAEA. It also outlines the operation of the database. The paper concludes with some remarks upon and illustrations of the usefulness of the database for the design and operation of HTR. (authors)

  17. Method of detecting irradiated pepper

    International Nuclear Information System (INIS)

    Doumaru, Takaaki; Furuta, Masakazu; Katayama, Tadashi; Toratani, Hirokazu; Takeda, Atsuhiko

    1989-01-01

    Spices represented by pepper are generally contaminated by microorganisms, and for using them as foodstuffs, some sterilizing treatment is indispensable. However, heating is not suitable to spices, accordingly ethylene oxide gas sterilization has been inevitably carried out, but its carcinogenic property is a problem. Food irradiation is the technology for killing microorganisms and noxious insects which cause the rotting and spoiling of foods and preventing the germination, which is an energy-conserving method without the fear of residual chemicals, therefore, it is most suitable to the sterilization of spices. In the irradiation of lower than 10 kGy, the toxicity test is not required for any food, and the irradiation of spices is permitted in 20 countries. However, in order to establish the international distribution organization for irradiated foods, the PR to consumers and the development of the means of detecting irradiation are the important subjects. The authors used pepper, and examined whether the hydrogen generated by irradiation remains in seeds and it can be detected or not. The experimental method and the results are reported. From the samples without irradiation, hydrogen was scarcely detected. The quantity of hydrogen generated was proportional to dose. The measuring instrument is only a gas chromatograph. (K.I.)

  18. Irradiation test plan of oxidation-resistant graphite in WWR-K Research Reactor

    International Nuclear Information System (INIS)

    Sumita, Junya; Shibata, Taiju; Sakaba, Nariaki; Osaki, Hirotaka; Kato, Hideki; Fujitsuka, Kunihiro; Muto, Takenori; Gizatulin, Shamil; Shaimerdenov, Asset; Dyussambayev, Daulet; Chakrov, Petr

    2014-01-01

    Graphite materials are used for the in-core components of High Temperature Gas-cooled Reactor (HTGR) which is a graphite-moderated and helium gas-cooled reactor. In the case of air ingress accident in HTGR, SiO_2 protective layer is formed on the surface of SiC layer in TRISO CFP and oxidation of SiC does not proceed and fission products are retained inside the fuel particle. A new safety concept for the HTGR, called Naturally Safe HTGR, has been recently proposed. To enhance the safety of Naturally Safe HTGR ultimately, it is expected that oxidation-resistant graphite is used for graphite components to prevent the TRISO CFPs and fuel compacts from failure. SiC coating is one of candidate methods for oxidation-resistant graphite. JAEA and four graphite companies launched R&Ds to develop the oxidation-resistant graphite and the International Science and Technology Center (ISTC) partner project with JAEA and INP was launched to investigate the irradiation effects on the oxidation-resistant graphite. To determine grades of the oxidation-resistant graphite which will be adopted as irradiation test, a preliminary oxidation test was carried out. This paper described the results of the preliminary oxidation test, the plan of out-of-pile test, irradiation test and post-irradiation test (PIE) of the oxidation-resistant graphite. The results of the preliminary oxidation test showed that the integrity of the oxidation resistant graphite was confirmed and that all of grades used in the preliminary test can be adopted as the irradiation test. Target irradiation temperature was determined to be 1473 (K) and neutron fluence was determined to be from 0.54 × 10"2"5through 1.4 × 10"2"5 (/m"2, E>0.18MeV). Weight change, oxidation rate, activation energy, surface condition, etc. will be evaluated in out-of-pile test and weight change, irradiation effect on oxidation rate and activation energy, surface condition, etc. will be evaluated in PIE. (author)

  19. Assessment of repair welding technologies of irradiated materials

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-08-15

    Damages of reactor internals of stainless steels caused by SCC and fatigue were identified in aged BWR plants. Repair-welding is one of the practical countermeasure candidates to restore the soundness of components and structures. The project of 'Assessment of Repair welding Technologies of Irradiated Materials' is being carried out to develop the technical guideline regarding the repair-welding of reactor internals. In fiscal 2011, we investigated the weldability of stainless steel 316L irradiated by welding (TIG) tungsten inert gas. Furthermore, the tensile properties and stress corrosion cracking (SCC) susceptibility of the welds were investigated. Cross-sectional observation of heat affected zone (HAZ) of the bead on plate TIG weldments (heat input 4 kJ/cm) of irradiated SUS316L stainless steel containing 0.026 ~ 0.12appm helium showed degradation of grain boundaries due to helium accumulation. Degree of the degradation depended on the amount of helium. No deterioration of grain boundaries was observed by bead on plate welding with one pass one layer when helium content was 0.039appm. The tensile strengths of welds in non-irradiated and irradiated material were similar. However, the elongation of a weldment by irradiated SUS316L containing 0.124appm Helium was lower than non-irradiated. It was estimated to cause the effects of helium bubbles. The SCC susceptibility of the HAZ was no significant difference compared with other locations. (author)

  20. Societal benefits of food irradiation

    International Nuclear Information System (INIS)

    Prakash, Anuradha

    2013-01-01

    Food irradiation has a direct impact on society by reducing the occurrence of food-borne illness, decreasing food spoilage and waste, and facilitating global trade. Food irradiation is approved in 40 countries around the world to decontaminate food of disease and spoilage causing microorganisms, sterilize insect pests, and inhibit sprouting. A recent estimate suggests that 500,000 metric of food is currently irradiated worldwide, primarily to decontaminate spices. Since its first use in the 1960s the use of irradiation for food has grown slowly, but it remains the major technology of choice for certain applications. The largest growth sector in recent years has been phytosanitary irradiation of fruit to disinfest fruit intended for international shipment. For many countries which have established strict quarantine standards, irradiation offers as an effective alternative to chemical fumigants some of which are being phased out due to their effects on the ozone layer. Insects can be sterilized at very low dose levels, thus quality of fruit can be maintained. Irradiation is also highly effective in destroying microbial pathogens such as Salmonella spp., E. coli, and Listeria, hence its application for treatment of spices, herbs, dried vegetables, frozen seafood, poultry, and meat and its contribution to reducing foodborne illnesses. Unfortunately the use of irradiation for improving food safety has been under-exploited. This presentation will provide details on the use, benefits, opportunities, and challenges of food irradiation. (author)