One-Dimensional Modelling of Internal Ballistics

Science.gov (United States)

Monreal-González, G.; Otón-Martínez, R. A.; Velasco, F. J. S.; García-Cascáles, J. R.; Ramírez-Fernández, F. J.

2017-10-01

A one-dimensional model is introduced in this paper for problems of internal ballistics involving solid propellant combustion. First, the work presents the physical approach and equations adopted. Closure relationships accounting for the physical phenomena taking place during combustion (interfacial friction, interfacial heat transfer, combustion) are deeply discussed. Secondly, the numerical method proposed is presented. Finally, numerical results provided by this code (UXGun) are compared with results of experimental tests and with the outcome from a well-known zero-dimensional code. The model provides successful results in firing tests of artillery guns, predicting with good accuracy the maximum pressure in the chamber and muzzle velocity what highlights its capabilities as prediction/design tool for internal ballistics.

Modelling of the radiological impact of radioactive waste dumping in the Arctic Seas. Report of the Modelling and Assessment Working Group of the International Arctic Seas Assessment Project (IASAP)

International Nuclear Information System (INIS)

2003-01-01

The work is summarized carried out by the Modelling and Assessment Working Group in 1994-1996. The Modelling and Assessment Working Group was established within the framework of the International Arctic Seas Assessment Project (IASAP) launched by the IAEA in 1993 with the objectives of modelling the environmental dispersal and transport of nuclides to be potentially released from the dumped objects and of assessing the associated radiological impact on man and biota. Models were developed to model the dispersal of the pollutants and for the assessment of the radiological consequences of the releases from the dumped wastes in the Arctic. The results of the model intercomparison exercise were used as a basis on which to evaluate the estimate of concentration fields when detailed source term scenarios were used and also to assess the uncertainties in ensuing dose calculations. The descriptions and modelling work was divided into three main phases: description of the area, collection of relevant and necessary information; extension to and development of predictive models including an extensive model inter-comparison and finally prediction of radiological impact, used in the evaluation of the need and options for remediation

Models of international entrepreneurship

DEFF Research Database (Denmark)

Rask, Morten; Servais, Per

2012-01-01

on International Entrepreneurship, and specifically but not exclusively, International New Ventures (INVs). The three resulting ‘meta-models’ depict the activities and loci of such firms (Figure 1), the motivating factors that give rise to such firms (Figure 2) and their growth modalities and strategies (Figure 3......). These models reflect the merger of entrepreneurship and international business into the field of international entrepreneurship. Managers in international entrepreneurial firms and students in international business and entrepreneurship can use the models as framework for understanding international...... entrepreneurship....

From sixty-two interviews on 'the worst and the best episode of your life'. Relationships between internal working models and a grammatical scale of subject-object affective connections.

Science.gov (United States)

Seganti, A; Carnevale, G; Mucelli, R; Solano, L; Target, M

2000-06-01

The authors address the issue of inferring unconscious internal working models of interaction through language. After reviewing Main's seminal work of linguistic assessment through the 'adult attachment interview', they stress the idea of adults' internal working models (IWMs) as information-processing devices, which give moment-to-moment sensory orientation in the face of any past or present, animate or inanimate object. They propose that a selective perception of the objects could match expected with actual influence of objects on the subject's self, through very simple 'parallel-processed' categories of internal objects. They further hypothesise that the isomorphism between internal working models of interaction and grammatical connections between subjects and objects within a clause could be a key to tracking positive and negative images of self and other during discourse. An experiment is reported applying the authors' 'scale of subject/object affective connection' to the narratives of sixty-two subjects asked to write about the 'worst' and 'best' episodes of their lives. Participants had previously been classified using Hazan & Shaver's self-reported 'attachment types' (avoidant, anxious and secure) categorising individuals' general expectations in relation to others. The findings were that the subject/object distribution of positive and negative experience, through verbs defined for this purpose as either performative or state verbs, did significantly differ between groups. In addition, different groups tended, during the best episodes, significantly to invert the trend of positive/negative subject/object distribution shown during the worst episode. Results are discussed in terms of a psychoanalytic theory of improvement through co-operative elaboration of negative relational issues.

Assessing work disability for social security benefits: international models for the direct assessment of work capacity.

Science.gov (United States)

Geiger, Ben Baumberg; Garthwaite, Kayleigh; Warren, Jon; Bambra, Clare

2017-08-25

It has been argued that social security disability assessments should directly assess claimants' work capacity, rather than relying on proxies such as on functioning. However, there is little academic discussion of how such assessments could be conducted. The article presents an account of different models of direct disability assessments based on case studies of the Netherlands, Germany, Denmark, Norway, the United States of America, Canada, Australia, and New Zealand, utilising over 150 documents and 40 expert interviews. Three models of direct work disability assessments can be observed: (i) structured assessment, which measures the functional demands of jobs across the national economy and compares these to claimants' functional capacities; (ii) demonstrated assessment, which looks at claimants' actual experiences in the labour market and infers a lack of work capacity from the failure of a concerned rehabilitation attempt; and (iii) expert assessment, based on the judgement of skilled professionals. Direct disability assessment within social security is not just theoretically desirable, but can be implemented in practice. We have shown that there are three distinct ways that this can be done, each with different strengths and weaknesses. Further research is needed to clarify the costs, validity/legitimacy, and consequences of these different models. Implications for rehabilitation It has recently been argued that social security disability assessments should directly assess work capacity rather than simply assessing functioning - but we have no understanding about how this can be done in practice. Based on case studies of nine countries, we show that direct disability assessment can be implemented, and argue that there are three different ways of doing it. These are "demonstrated assessment" (using claimants' experiences in the labour market), "structured assessment" (matching functional requirements to workplace demands), and "expert assessment" (the

Enhancing the Action Research Capacity of the International Model ...

International Development Research Centre (IDRC) Digital Library (Canada)

... the UNCED (United Nations Conference on Environment and Development) Rio ... an international network of working models of sustainable forest management ... countries in Africa, Asia, Canada, Europe, Latin America and the Caribbean, ...

Key Relationships for International Student University-to-Work Transitions

Science.gov (United States)

Popadiuk, Natalee Elizabeth; Arthur, Nancy Marie

2014-01-01

International student research predominantly focuses on the initial and middle stages of their sojourn. Our research, however, specifically addresses how relationships support international students to successfully navigate the late-stage transition from university to work. In this qualitative study, we interviewed 18 international students from…

Visual working memory as visual attention sustained internally over time.

Science.gov (United States)

Chun, Marvin M

2011-05-01

Visual working memory and visual attention are intimately related, such that working memory encoding and maintenance reflects actively sustained attention to a limited number of visual objects and events important for ongoing cognition and action. Although attention is typically considered to operate over perceptual input, a recent taxonomy proposes to additionally consider how attention can be directed to internal perceptual representations in the absence of sensory input, as well as other internal memories, choices, and thoughts (Chun, Golomb, & Turk-Browne, 2011). Such internal attention enables prolonged binding of features into integrated objects, along with enhancement of relevant sensory mechanisms. These processes are all limited in capacity, although different types of working memory and attention, such as spatial vs. object processing, operate independently with separate capacity. Overall, the success of maintenance depends on the ability to inhibit both external (perceptual) and internal (cognitive) distraction. Working memory is the interface by which attentional mechanisms select and actively maintain relevant perceptual information from the external world as internal representations within the mind. Copyright © 2011. Published by Elsevier Ltd.

Human work interaction design meets international development

DEFF Research Database (Denmark)

Campos, P.; Clemmensen, T.; Barricelli, B.R.

2017-01-01

opportunity to observe technology-mediated innovative work practices in informal settings that may be related to the notion of International Development. In this unique context, this workshop proposes to analyze findings related to opportunities for design research in this type of work domains: a) human......Over the last decade, empirical relationships between work domain analysis and HCI design have been identified by much research in the field of Human Work Interaction Design (HWID) across five continents. Since this workshop takes place at the Interact Conference in Mumbai, there is a unique...

SME International Business Models

DEFF Research Database (Denmark)

Child, John; Hsieh, Linda; Elbanna, Said

2017-01-01

This paper addresses two questions through a study of 180 SMEs located in contrasting industry and home country contexts. First, which business models for international markets prevail among SMEs and do they configure into different types? Second, which factors predict the international business...... models that SMEs follow? Three distinct international business models (traditional market-adaptive, technology exploiter, and ambidextrous explorer) are found among the SMEs studied. The likelihood of SMEs adopting one business model rather than another is to a high degree predictable with reference...

Comparing international and South African work-based assessment ...

African Journals Online (AJOL)

Comparing international and South African work-based assessment of medical interns' practice. ... in the finding that most studies in SA have dealt with the assessment of core procedural skills related to acute clinical care, while the assessment of non-clinical competencies and non-procedural skills was poorly addressed.

The Development of International Programs in a School of Social Work

Directory of Open Access Journals (Sweden)

Frank B. Raymond

2014-04-01

Full Text Available During the last decade increasing numbers of schools of social work have adopted an international mission and have developed a variety of activities to reflect their global perspective. In earlier years, however, relatively few schools expressed a global mission, offered coursework on international social work, provided field placements or other opportunities to expose students to international learning, or extended components of their academic programs to other countries. An early leader in doing such things was the College of Social Work at the University of South Carolina (COSW, where the author was privileged to serve as dean for 22 years (1980-2002 when many of these developments occurred. This paper will discuss how this school acquired an international mission and developed various programs to manifest this commitment. The paper will describe, in particular, the college’s signature achievement in international social work education – the development and implementation of a Korea-based MSW program. The COSW was the first school of social work in the US to offer a master’s degree in its entirety in a foreign country. It is hoped that the recounting of this school’s experiences will offer guidance to other social work education programs that are exploring ways of expanding their international initiatives.

A Management Model for International Participation in Space Exploration Missions

Science.gov (United States)

George, Patrick J.; Pease, Gary M.; Tyburski, Timothy E.

2005-01-01

This paper proposes an engineering management model for NASA's future space exploration missions based on past experiences working with the International Partners of the International Space Station. The authors have over 25 years of combined experience working with the European Space Agency, Japan Aerospace Exploration Agency, Canadian Space Agency, Italian Space Agency, Russian Space Agency, and their respective contractors in the design, manufacturing, verification, and integration of their elements electric power system into the United States on-orbit segment. The perspective presented is one from a specific sub-system integration role and is offered so that the lessons learned from solving issues of technical and cultural nature may be taken into account during the formulation of international partnerships. Descriptions of the types of unique problems encountered relative to interactions between international partnerships are reviewed. Solutions to the problems are offered, taking into consideration the technical implications. Through the process of investigating each solution, the important and significant issues associated with working with international engineers and managers are outlined. Potential solutions are then characterized by proposing a set of specific methodologies to jointly develop spacecraft configurations that benefits all international participants, maximizes mission success and vehicle interoperability while minimizing cost.

On the Origins of Disorganized Attachment and Internal Working Models: Paper II. An Empirical Microanalysis of 4-Month Mother-Infant Interaction

Science.gov (United States)

Beebe, Beatrice; Lachmann, Frank; Markese, Sara; Buck, Karen A.; Bahrick, Lorraine E.; Chen, Henian; Cohen, Patricia; Andrews, Howard; Feldstein, Stanley; Jaffe, Joseph

2012-01-01

A microanalysis of 4-month mother-infant face-to-face communication predicted 12-month infant disorganized (vs. secure) attachment outcomes in an urban community sample. We documented a dyadic systems view of the roles of both partners, the roles of both self- and interactive contingency, and the importance of attention, orientation and touch, and as well as facial and vocal affect, in the co-construction of attachment disorganization. The analysis of different communication modalities identified striking intrapersonal and interpersonal intermodal discordance or conflict, in the context of intensely distressed infants, as the central feature of future disorganized dyads at 4 months. Lowered maternal contingent coordination, and failures of maternal affective correspondence, constituted maternal emotional withdrawal from distressed infants. This maternal withdrawal compromises infant interactive agency and emotional coherence. We characterize of the nature of emerging internal working models of future disorganized infants as follows: Future disorganized infants represent states of not being sensed and known by their mothers, particularly in moments of distress; they represent confusion about both their own and their mothers’ basic emotional organization, and about their mothers’ response to their distress. This internal working model sets a trajectory in development which may disturb the fundamental integration of the person. The remarkable specificity of our findings has the potential to lead to more finely-focused clinical interventions. PMID:23066334

INTERNAL REGULATIONS OF INTERNATIONAL COMPANIES OPERATING IN POLAND AND TRADITIONAL FAMILY MODEL

Directory of Open Access Journals (Sweden)

Chojara-Sobiecka Małgorzata

2017-12-01

Full Text Available Most of the big companies have the internal regulations about human resources management. The bylaws in question are usually created in the reality of a particular legal system. When a company expands abroad, it starts operating in a different legal system than its own. As a result, the bylaws are not always compatible neither with laws nor the legal culture of the state of a new market. The paper touches upon the problem of the cohesion of internal regulations of some of the international companies operating in Poland with the traditional family model established in Polish law analyzing three areas such as: supporting parenting, family business, and preference for non-heterosexual persons. The conclusions are that some of the internal regulations are not coherent with Polish law, and some of the bylaws regarding, e.g., daycare or flexible working hours, can be adapted to Polish legal system. It (unclear what “it” is referring to would benefit traditional model of the family. The paper contains also the excursus about some legis-lative phenomenon regarding the reception of state law regulations issues by private companies and pos-tulates that the Polish legislator shall be open to new ideas in this matter and search for the well-tried regulations.

International Social Work Field Placement or Volunteer Tourism? Developing an Asset-Based Justice-Learning Field Experience

Science.gov (United States)

Sossou, Marie-Antoinette; Dubus, Nicole

2013-01-01

This paper examines a developing model for building an international social work placement that meets the needs of the host agency and community first. The paper addresses the challenges for social work departments to develop a strong learning environment while also keeping primary the needs of the host community and agency.

A comprehensive gaze stabilization controller based on cerebellar internal models

DEFF Research Database (Denmark)

Vannucci, Lorenzo; Falotico, Egidio; Tolu, Silvia

2017-01-01

. The VOR works in conjunction with the opto-kinetic reflex (OKR), which is a visual feedback mechanism that allows to move the eye at the same speed as the observed scene. Together they keep the image stationary on the retina. In this work we implement on a humanoid robot a model of gaze stabilization...... based on the coordination of VCR and VOR and OKR. The model, inspired by neuroscientific cerebellar theories, is provided with learning and adaptation capabilities based on internal models. We present the results for the gaze stabilization model on three sets of experiments conducted on the SABIAN robot...

THE INTERNAL CONTROL MODELS IN ROMANIA

Directory of Open Access Journals (Sweden)

TEODORESCU CRISTIAN DRAGOȘ

2015-06-01

Full Text Available Internal control is indissolubly linked to business and accounting. Throughout history, domestic and international trade has grown exponentially, which has led to an increasing complexity of internal control, to new methods and techniques to control the business. The literature has presented the first models of internal control in the Sumerian period (3600 - 3200 BC, and the emergence and development of internal control in Egypt, Persia, Greek and Roman Empire, in the Middle Ages till modern times. The purpose of this article is to present the models of internal control in Romania, starting from the principles of the classical model of internal control (COSO model. For a better understanding of the implication of internal control in terms of public and private sector, I have structured the article in the following parts: (a the definition of internal control in the literature; (b the presentation of the COSO model; (c internal control and internal audit in public institutions; (d internal control issues in accounting regulations on the individual and consolidated annual financial statements; (e internal / managerial control; (f conclusions.

Hospital nurses' individual priorities, internal psychological states and work motivation.

Science.gov (United States)

Toode, K; Routasalo, P; Helminen, M; Suominen, T

2014-09-01

This study looks to describe the relationships between hospital nurses' individual priorities, internal psychological states and their work motivation. Connections between hospital nurses' work-related needs, values and work motivation are essential for providing safe and high quality health care. However, there is insufficient empirical knowledge concerning these connections for the practice development. A cross-sectional empirical research study was undertaken. A total of 201 registered nurses from all types of Estonian hospitals filled out an electronic self-reported questionnaire. Descriptive statistics, Mann-Whitney, Kruskal-Wallis and Spearman's correlation were used for data analysis. In individual priorities, higher order needs strength were negatively correlated with age and duration of service. Regarding nurses' internal psychological states, central hospital nurses had less sense of meaningfulness of work. Nurses' individual priorities (i.e. their higher order needs strength and shared values with the organization) correlated with their work motivation. Their internal psychological states (i.e. their experienced meaningfulness of work, experienced responsibility for work outcomes and their knowledge of results) correlated with intrinsic work motivation. Nurses who prioritize their higher order needs are more motivated to work. The more their own values are compatible with those of the organization, the more intrinsically motivated they are likely to be. Nurses' individual achievements, autonomy and training are key factors which influence their motivation to work. The small sample size and low response rate of the study limit the direct transferability of the findings to the wider nurse population, so further research is needed. This study highlights the need and importance to support nurses' professional development and self-determination, in order to develop and retain motivated nurses. It also indicates a need to value both nurses and nursing in

Models og International Entrepreneurship

DEFF Research Database (Denmark)

Rask, Morten; Servais, Per

2015-01-01

on International Entrepreneurship, and specifically but not exclusively, International New Ventures (INVs). The three resulting ‘meta-models’ depict the activities and loci of such firms, the motivating factors that give rise to such firms and their growth modalities and strategies. These models reflect the merger...... of entrepreneurship and international business into the field of international entrepreneurship....

Work-Related Attitudes of Czech Generation Z: International Comparison

Directory of Open Access Journals (Sweden)

Jaroslava Kubátová,

2016-12-01

Full Text Available The goal of this article is to present work-related attitudes of a sample of Czech Generation Z and their comparison to the results of an international research study. Currently, there are three important trends influencing the labor market: (1 the origin and development of a ubiquitous working environment, (2 the thriving of coworking centers, and (3 Generation Z's entering the labor market. Instead of traditional jobs, the bearers of human capital tend to choose independent work in an online environment, and often work in coworking centers. Using self-determination theory, we substantiate why they thrive better this way. Based on the results of an international research project focused on work attitudes among Generation Z and the results of a replication study we carried out in the Czech Republic, we attest that members of Generation Z may prefer independent virtual work in coworking centers, too. The total amount of available human capital, the lack of which is pointed out by companies, may grow thanks to new ways of working. Companies, which can use human capital of independent workers, gain a competitive advantage.

Occupant-vehicle dynamics and the role of the internal model

Science.gov (United States)

Cole, David J.

2018-05-01

With the increasing need to reduce time and cost of vehicle development there is increasing advantage in simulating mathematically the dynamic interaction of a vehicle and its occupant. The larger design space arising from the introduction of automated vehicles further increases the potential advantage. The aim of the paper is to outline the role of the internal model hypothesis in understanding and modelling occupant-vehicle dynamics, specifically the dynamics associated with direction and speed control of the vehicle. The internal model is the driver's or passenger's understanding of the vehicle dynamics and is thought to be employed in the perception, cognition and action processes of the brain. The internal model aids the estimation of the states of the vehicle from noisy sensory measurements. It can also be used to optimise cognitive control action by predicting the consequence of the action; thus model predictive control (MPC) theory provides a foundation for modelling the cognition process. The stretch reflex of the neuromuscular system also makes use of the prediction of the internal model. Extensions to the MPC approach are described which account for: interaction with an automated vehicle; robust control; intermittent control; and cognitive workload. Further work to extend understanding of occupant-vehicle dynamic interaction is outlined. This paper is based on a keynote presentation given by the author to the 13th International Symposium on Advanced Vehicle Control (AVEC) conference held in Munich, September 2016.

Response of subassembly model with internals

International Nuclear Information System (INIS)

Kennedy, J.M.; Belytschko, T.

1977-01-01

Analytical tools have been developed and validated by controlled sets of experiments to understand the response of an accident and/or single subassembly in an LMFBR reasonably well. They have been subjected to a variety of loadings and boundary environments. Some large subassembly cluster experiments have been performed, however little analytical work has accompanied them because of the lack of suitable analytical tools. Reported are analytical approaches to: (1) development of more sophisiticated models for the subassembly internals, that is, the fuel pins and coolant; (2) development of models for representing three dimensional effects in subassemblies adjacent to the accident subassembly. These analytical developments will provide feasible capabilities for doing economical three-dimensional analysis not previously available

Rethinking work-health models for the new global economy: a qualitative analysis of emerging dimensions of work.

Science.gov (United States)

Polanyi, Michael; Tompa, Emile

2004-01-01

Technology change, rising international trade and investment, and increased competition are changing the organization, distribution and nature of work in industrialized countries. To enhance productivity, employers are striving to increase innovation while minimizing costs. This is leading to an intensification of work demands on core employees and the outsourcing or casualization of more marginal tasks, often to contingent workers. The two prevailing models of work and health - demand-control and effort-reward imbalance - may not capture the full range of experiences of workers in today's increasingly flexible and competitive economies. To explore this proposition, we conducted a secondary qualitative analysis of interviews with 120 American workers [6]. Our analysis identifies aspects of work affecting the quality of workers' experiences that are largely overlooked by popular work-health models: the nature of social interactions with customers and clients; workers' belief in, and perception of, the importance of the product of their work. We suggest that the quality of work experiences is partly determined by the objective characteristics of the work environment, but also by the fit of the work environment with the worker's needs, interests, desires and personality, something not adequately captured in current models.

[Effects of an implicit internal working model on attachment in information processing assessed using Go/No-Go Association Task].

Science.gov (United States)

Fujii, Tsutomu; Uebuchi, Hisashi; Yamada, Kotono; Saito, Masahiro; Ito, Eriko; Tonegawa, Akiko; Uebuchi, Marie

2015-06-01

The purposes of the present study were (a) to use both a relational-anxiety Go/No-Go Association Task (GNAT) and an avoidance-of-intimacy GNAT in order to assess an implicit Internal Working Model (IWM) of attachment; (b) to verify the effects of both measured implicit relational anxiety and implicit avoidance of intimacy on information processing. The implicit IWM measured by GNAT differed from the explicit IWM measured by questionnaires in terms of the effects on information processing. In particular, in subliminal priming tasks involving with others, implicit avoidance of intimacy predicted accelerated response times with negative stimulus words about attachment. Moreover, after subliminally priming stimulus words about self, implicit relational anxiety predicted delayed response times with negative stimulus words about attachment.

3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications

CERN Document Server

Koziel, Slawomir; Kacprzyk, Janusz; Leifsson, Leifur; Ören, Tuncer

2015-01-01

This book includes extended and revised versions of a set of selected papers from the 3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2013) which was co-organized by the Reykjavik University (RU) and sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC). SIMULTECH 2013 was held in cooperation with the ACM SIGSIM - Special Interest Group (SIG) on SImulation and Modeling (SIM), Movimento Italiano Modellazione e Simulazione (MIMOS) and AIS Special Interest Group on Modeling and Simulation (AIS SIGMAS) and technically co-sponsored by the Society for Modeling & Simulation International (SCS), Liophant Simulation, Simulation Team and International Federation for Information Processing (IFIP). This proceedings brings together researchers, engineers, applied mathematicians and practitioners working in the advances and applications in the field of system simulation.

Data envelopment analysis a handbook of modeling internal structure and network

CERN Document Server

Cook, Wade D

2014-01-01

This comprehensive handbook on state-of-the-art topics in DEA modeling of internal structures and networks presents work by leading researchers who share their results on subjects including additive efficiency decomposition and slacks-based network DEA.

Work experiences of internationally trained pharmacists in Great Britain.

Science.gov (United States)

Ziaei, Zainab; Hassell, Karen; Schafheutle, Ellen I

2015-04-01

Internationally trained health professionals are an important part of the domestic workforce, but little is known about the working experiences of internationally trained pharmacists (ITPs) in Great Britain (GB). The purpose of this study is to explore the work experiences of ITPs practising in the community or hospital sector in GB. Twenty-five semi-structured, face-to-face interviews were conducted with a sample of European Economic Area (EEA) and non-EEA pharmacists who, at the time of the study, practised in the community (n = 20) or hospital sector (n = 5) in the North West England from March to May 2009. In general, ITPs complained about their heavy workload, long working hours and lack of support from their employers. Specifically, EEA pharmacists in most cases felt excluded from the professional network and sensed colleagues saw them as 'foreigners' while some non-EEA pharmacists had to deal with a level of hostility from patients. This novel research provides a foundation for future work on ITPs in GB and could assist employers to better target their efforts in development of standards to support the working experiences of ITPs in GB. © 2014 Royal Pharmaceutical Society.

A Feminist Approach to Working with Internalized Heterosexism in Lesbians

Science.gov (United States)

Szymanski, Dawn M.

2005-01-01

This article addresses counselors' calls for more training on internalized heterosexism. Through a synthesis of the research on lesbian internalized heterosexism, the author discusses how the integration of a feminist approach can enhance college counselors' work with lesbian clients, describes 3 core feminist therapy principles, uses these…

Maternal depression and trajectories of child internalizing and externalizing problems: the roles of child decision making and working memory.

Science.gov (United States)

Flouri, E; Ruddy, A; Midouhas, E

2017-04-01

Maternal depression may affect the emotional/behavioural outcomes of children with normal neurocognitive functioning less severely than it does those without. To guide prevention and intervention efforts, research must specify which aspects of a child's cognitive functioning both moderate the effect of maternal depression and are amenable to change. Working memory and decision making may be amenable to change and are so far unexplored as moderators of this effect. Our sample was 17 160 Millennium Cohort Study children. We analysed trajectories of externalizing (conduct and hyperactivity) and internalizing (emotional and peer) problems, measured with the Strengths and Difficulties Questionnaire at the ages 3, 5, 7 and 11 years, using growth curve models. We characterized maternal depression, also time-varying at these ages, by a high score on the K6. Working memory was measured with the Cambridge Neuropsychological Test Automated Battery Spatial Working Memory Task, and decision making (risk taking and quality of decision making) with the Cambridge Gambling Task, both at age 11 years. Maternal depression predicted both the level and the growth of problems. Risk taking and poor-quality decision making were related positively to externalizing and non-significantly to internalizing problems. Poor working memory was related to both problem types. Neither decision making nor working memory explained the effect of maternal depression on child internalizing/externalizing problems. Importantly, risk taking amplified the effect of maternal depression on internalizing problems, and poor working memory that on internalizing and conduct problems. Impaired decision making and working memory in children amplify the adverse effect of maternal depression on, particularly, internalizing problems.

Acquisitions or Mergers? International Students' Satisfaction with Work Availability

Science.gov (United States)

Li, Xiaojie; Lee, Jenny

2018-01-01

This study sought to examine international students' satisfaction with work availability while enrolled and the factors that influenced this satisfaction through the acquisitions and mergers framework. The findings indicated that a notable portion of international students might be treated as acquisitions, based on their self-reports of low work…

International Space Station Earth Observations Working Group

Science.gov (United States)

Stefanov, William L.; Oikawa, Koki

2015-01-01

The multilateral Earth Observations Working Group (EOWG) was chartered in May 2012 in order to improve coordination and collaboration of Earth observing payloads, research, and applications on the International Space Station (ISS). The EOWG derives its authority from the ISS Program Science Forum, and a NASA representative serves as a permanent co-chair. A rotating co-chair position can be occupied by any of the international partners, following concurrence by the other partners; a JAXA representative is the current co-chair. Primary functions of the EOWG include, 1) the exchange of information on plans for payloads, from science and application objectives to instrument development, data collection, distribution and research; 2) recognition and facilitation of opportunities for international collaboration in order to optimize benefits from different instruments; and 3) provide a formal ISS Program interface for collection and application of remotely sensed data collected in response to natural disasters through the International Charter, Space and Major Disasters. Recent examples of EOWG activities include coordination of bilateral data sharing protocols between NASA and TsNIIMash for use of crew time and instruments in support of ATV5 reentry imaging activities; discussion of continued use and support of the Nightpod camera mount system by NASA and ESA; and review and revision of international partner contributions on Earth observations to the ISS Program Benefits to Humanity publication.

Prioritizing Information during Working Memory: Beyond Sustained Internal Attention.

Science.gov (United States)

Myers, Nicholas E; Stokes, Mark G; Nobre, Anna C

2017-06-01

Working memory (WM) has limited capacity. This leaves attention with the important role of allowing into storage only the most relevant information. It is increasingly evident that attention is equally crucial for prioritizing representations within WM as the importance of individual items changes. Retrospective prioritization has been proposed to result from a focus of internal attention highlighting one of several representations. Here, we suggest an updated model, in which prioritization acts in multiple steps: first orienting towards and selecting a memory, and then reconfiguring its representational state in the service of upcoming task demands. Reconfiguration sets up an optimized perception-action mapping, obviating the need for sustained attention. This view is consistent with recent literature, makes testable predictions, and links WM with task switching and action preparation. Copyright © 2017 Elsevier Ltd. All rights reserved.

The International Space Life Sciences Strategic Planning Working Group

Science.gov (United States)

White, Ronald J.; Rabin, Robert; Lujan, Barbara F.

1993-01-01

Throughout the 1980s, ESA and the space agencies of Canada, Germany, France, Japan, and the U.S. have pursued cooperative projects bilaterally and multilaterally to prepare for, and to respond to, opportunities in space life sciences research previously unapproachable in scale and sophistication. To cope effectively with likely future space research opportunities, broad, multilateral, coordinated strategic planning is required. Thus, life scientists from these agencies have allied to form the International Space Life Sciences Strategic Planning Working Group. This Group is formally organized under a charter that specifies the purpose of the Working Group as the development of an international strategic plan for the space life sciences, with periodic revisions as needed to keep the plan current. The plan will be policy-, not operations-oriented. The Working Group also may establish specific implementation teams to coordinate multilateral science policy in specific areas; such teams have been established for space station utilization, and for sharing of flight equipment.

Modeling Electrostatic Fields Generated by Internal Charging of Materials in Space Radiation Environments

Science.gov (United States)

Minow, Joseph I.

2011-01-01

Internal charging is a risk to spacecraft in energetic electron environments. DICTAT, NU MIT computational codes are the most widely used engineering tools for evaluating internal charging of insulator materials exposed to these environments. Engineering tools are designed for rapid evaluation of ESD threats, but there is a need for more physics based models for investigating the science of materials interactions with energetic electron environments. Current tools are limited by the physics included in the models and ease of user implementation .... additional development work is needed to improve models.

Team Work in International Programs: Why is it so difficult?

DEFF Research Database (Denmark)

Lauridsen, Karen M.; Madsen, Henning

intercultural collaboration. The issues that arise seem to be grounded in linguistic, cultural and educational factors. This paper reports on and discusses a study of student responses to intercultural collaboration (in English) in two programmes at Aarhus University, Denmark. One conclusion...... is that the international students are more prepared to work in multicultural teams than their Danish peers. Another one tells us that once students have experience with the diversity of these teams, at least some of them become more open towards working in such teams in the future. It is interesting to discuss......Team Work in International Programs: Why is it so difficult? And what can we do about it? It is common knowledge that students often find it difficult to collaborate on assignments, projects, etc., but we require that they do so for a number of reasons, e.g. to learn how to work in teams or take...

Optimal closed-loop identification test design for internal model control

NARCIS (Netherlands)

Zhu, Y.; Bosch, van den P.P.J.

2000-01-01

In this work, optimal closed-loop test design for control is studied. Simple design formulas are derived based on the asymptotic theory of Ljung. The control scheme used is internal model control (IMC) and the design constraint is the power of the process output or that of the reference signal. The

Modeling Internal Radiation Therapy

NARCIS (Netherlands)

van den Broek, Egon; Schouten, Theo E.; Pellegrini, M.; Fred, A.; Filipe, J.; Gamboa, H.

2011-01-01

A new technique is described to model (internal) radiation therapy. It is founded on morphological processing, in particular distance transforms. Its formal basis is presented as well as its implementation via the Fast Exact Euclidean Distance (FEED) transform. Its use for all variations of internal

The work of committee 2 of ICRP on internal dosimetry

International Nuclear Information System (INIS)

Stather, J.W.

2005-01-01

Full text: Over the last few years the Task Group of Committee 2 of ICRP on Internal Dosimetry (INDOS), in conjunction with the Task Group on Dose Calculations (DOCAL), has prepared a series of publications that have given dose coefficients for intakes of radionuclides by infants, children and adults. The most recent publications have been Publication 88 that gives doses to the embryo, fetus and newborn child from intakes of radionuclides by the mother and Publication 94 that will give doses to the newborn child from intakes of radionuclides in mothers' milk. These documents have completed the programme of work of Committee 2 on dose coefficients for members of the public. The emphasis of work on internal dosimetry by Committee 2 is now concerned with occupational exposure. This is will take into account recent advice from ICRP, including the new 2005 Recommendations of ICRP which are expected to provide revised tissue weighting factors for the calculation of effective dose. In addition ICRP has issued Publication 89 on Basic Anatomical and Physiological Data for use in Radiological Protection and in addition will have published a new Human Alimentary Tract Model (HATM). It will have implemented a human phantom for dose calculations based upon medical imaging data and updated radionuclide decay data; superseding Publication 38. In addition, the systemic models for a number of elements are being revised to take account of more recent data, and the lung clearance characteristics of a wide range of compounds relevant to occupational exposure are being reviewed. It is intended to replace Publications 30 and 68 that give biokinetic data and dose coefficients for intakes of radionuclides and Publications 54 and 78 that give information for bioassay interpretation, with a single series of publications. This series will cover both dosimetry and data for bioassay interpretation. The first report will cover radionuclides of the 31 elements covered in the series of

Spanish adaptation of the internal functioning of the Work Teams Scale (QFI-22).

Science.gov (United States)

Ficapal-Cusí, Pilar; Boada-Grau, Joan; Torrent-Sellens, Joan; Vigil-Colet, Andreu

2014-05-01

The aim of this article is to develop the Spanish adaptation of the internal functioning of Work Teams Scale (QFI-22). The scale was adapted from the French version, and was applied to a sample of 1,055 employees working for firms operating in Spain. The article analyses the internal structure (exploratory and confirmatory factor analysis) and internal consistency, and provides convergent validity evidence of the scale. The QFI-22 scale shows the same internal structure as the original. Factor analysis confirmed the existence of two factors: interpersonal support and team work management, with good internal consistency coefficients (α1 = .93, α2 = .92). Regarding validity evidence, the QFI-22 scale has significant correlations with other correlates and alternative scales used for comparison purposes. The two factors correlated positively with team vision, participation safety, task orientation and support for innovation (Team Climate Inventory, TCI scale), with progressive culture (Organisational Culture, X-Y scale), and with creating change, customer focus and organisational learning (Denison Organizational Culture Survey, DOCS scale). In contrast, the two factors correlated negatively with traditional culture (X-Y scale). The QFI-22 scale is a useful instrument for assessing the internal functioning of work teams.

Modeling internal ballistics of gas combustion guns.

Science.gov (United States)

Schorge, Volker; Grossjohann, Rico; Schönekess, Holger C; Herbst, Jörg; Bockholdt, Britta; Ekkernkamp, Axel; Frank, Matthias

2016-05-01

Potato guns are popular homemade guns which work on the principle of gas combustion. They are usually constructed for recreational rather than criminal purposes. Yet some serious injuries and fatalities due to these guns are reported. As information on the internal ballistics of homemade gas combustion-powered guns is scarce, it is the aim of this work to provide an experimental model of the internal ballistics of these devices and to investigate their basic physical parameters. A gas combustion gun was constructed with a steel tube as the main component. Gas/air mixtures of acetylene, hydrogen, and ethylene were used as propellants for discharging a 46-mm caliber test projectile. Gas pressure in the combustion chamber was captured with a piezoelectric pressure sensor. Projectile velocity was measured with a ballistic speed measurement system. The maximum gas pressure, the maximum rate of pressure rise, the time parameters of the pressure curve, and the velocity and path of the projectile through the barrel as a function of time were determined according to the pressure-time curve. The maximum gas pressure was measured to be between 1.4 bar (ethylene) and 4.5 bar (acetylene). The highest maximum rate of pressure rise was determined for hydrogen at (dp/dt)max = 607 bar/s. The muzzle energy was calculated to be between 67 J (ethylene) and 204 J (acetylene). To conclude, this work provides basic information on the internal ballistics of homemade gas combustion guns. The risk of injury to the operator or bystanders is high, because accidental explosions of the gun due to the high-pressure rise during combustion of the gas/air mixture may occur.

Monte Carlo modelling of Germanium detectors for the measurement of low energy photons in internal dosimetry: Results of an international comparison

Energy Technology Data Exchange (ETDEWEB)

Gomez-Ros, J.M. [CIEMAT, Av. Complutense 22, E-28040 Madrid (Spain)], E-mail: jm.gomezros@ciemat.es; Carlan, L. de [CEA DRT/LIST/DETECS/LNHB/LMD, Bat 534, F-91191 Gif sur Yvette, Cedex (France); IRSN DRPH/SDI/LEDI, BP6, F-92262, Fontenay-aux-Roses, Cedex (France); Franck, D. [IRSN DRPH/SDI/LEDI, BP6, F-92262, Fontenay-aux-Roses, Cedex (France); Gualdrini, G. [ENEA ION-IRP, Via dei Colli 16, I-40136 Bologna (Italy); Lis, M.; Lopez, M.A.; Moraleda, M. [CIEMAT, Av. Complutense 22, E-28040 Madrid (Spain); Zankl, M. [GSF - National Research Center for Environment and Health, D-85764 Neuherberg (Germany); Badal, A. [Institut de Tecniques Energetiques, UPC, Diagonal 647, 08028 Barcelona (Spain); Capello, K. [Human Monitoring Laboratory (Canada); Cowan, P. [Serco Assurance, Bld. A32, Winfrith Tech. Centre Winfrith, Dorchester, Dorset DT2 8DH (United Kingdom); Ferrari, P. [ENEA ION-IRP, Via dei Colli 16, I-40136 Bologna (Italy); Heide, B. [Forschungszentrum Karlsruhe, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Henniger, J. [Technical University of Dresden, 01062 Dresden (Germany); Hooley, V. [Serco Assurance, Bld. A32, Winfrith Tech. Centre Winfrith, Dorchester, Dorset DT2 8DH (United Kingdom); Hunt, J. [IRD, Av. Salvador Allende, s/n, Recreio, Rio de Janeiro (Brazil); Kinase, S. [Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki-ken 319-1195 (Japan); Kramer, G.H. [Human Monitoring Laboratory (Canada); Loehnert, D. [Technical University of Dresden, 01062 Dresden (Germany); Lucas, S. [LARN Laboratory, University of Namur, Rue de Bruxelles 61, B-5000 Namur (Belgium)] (and others)

2008-02-15

This communication summarizes the results concerning the Monte Carlo (MC) modelling of Germanium detectors for the measurement of low energy photons arising from the 'International comparison on MC modelling for in vivo measurement of Americium in a knee phantom' organized within the EU Coordination Action CONRAD (Coordinated Network for Radiation Dosimetry) as a joint initiative of EURADOS working groups 6 (computational dosimetry) and 7 (internal dosimetry). MC simulations proved to be an applicable way to obtain the calibration factor that needs to be used for in vivo measurements.

Four-Stroke, Internal Combustion Engine Performance Modeling

Science.gov (United States)

Wagner, Richard C.

In this thesis, two models of four-stroke, internal combustion engines are created and compared. The first model predicts the intake and exhaust processes using isentropic flow equations augmented by discharge coefficients. The second model predicts the intake and exhaust processes using a compressible, time-accurate, Quasi-One-Dimensional (Q1D) approach. Both models employ the same heat release and reduced-order modeling of the cylinder charge. Both include friction and cylinder loss models so that the predicted performance values can be compared to measurements. The results indicate that the isentropic-based model neglects important fluid mechanics and returns inaccurate results. The Q1D flow model, combined with the reduced-order model of the cylinder charge, is able to capture the dominant intake and exhaust fluid mechanics and produces results that compare well with measurement. Fluid friction, convective heat transfer, piston ring and skirt friction and temperature-varying specific heats in the working fluids are all shown to be significant factors in engine performance predictions. Charge blowby is shown to play a lesser role.

Qualitative interviews of pharmacy interns: determining curricular preparedness for work life

Directory of Open Access Journals (Sweden)

Stupans I

2012-03-01

Full Text Available One of the key features affecting the transition from university to paid employment is the graduate’s perception of their capability to satisfactorily perform the work of a graduate. In some professions such as in nursing, the concept of “transition shock” is referred to. There is a need to understand how pharmacy students perceive the transition to their first job as intern pharmacists and identify potential curriculum gaps in their pharmacy studies. To date, little evidence around whether university programs are effective in equipping pharmacy graduates in transitioning to the world of work has been published.Objectives: To explore from the perspective of new pharmacy professionals, graduated from one Australian university areas that need to be addressed in pharmacy programs to prepare graduates for the transition to full-time work as interns in pharmacy. Methods: Thematic analysis of interviews with interns.Results: Subthemes were identified within the responses- relationships within the workplace and graduates needing to interest themselves in other people, adjusting to work hours and the differences between university assessments and performing in a workplace. Suggestions were made by graduates that the placement period within the pharmacy program be increased.Conclusions: Pharmacy graduates appear prepared for the world of pharmacy work. The concept of “transition shock” or “transition stress” described for graduates of other health professions commencing work was not apparent.

Preface: International Reference Ionosphere - Progress in Ionospheric Modelling

Science.gov (United States)

Bilitza Dieter; Reinisch, Bodo

2010-01-01

The international reference ionosphere (lRI) is the internationally recommended empirical model for the specification of ionospheric parameters supported by the Committee on Space Research (COSPAR) and the International Union of Radio Science (URSI) and recognized by the International Standardization Organization (ISO). IRI is being continually improved by a team of international experts as new data become available and better models are being developed. This issue chronicles the latest phase of model updates as reported during two IRI-related meetings. The first was a special session during the Scientific Assembly of the Committee of Space Research (COSPAR) in Montreal, Canada in July 2008 and the second was an IRI Task Force Activity at the US Air Force Academy in Colorado Springs in May 2009. This work led to several improvements and additions of the model which will be included in the next version, IRI-201O. The issue is divided into three sections focusing on the improvements made in the topside ionosphere, the F-peak, and the lower ionosphere, respectively. This issue would not have been possible without the reviewing efforts of many individuals. Each paper was reviewed by two referees. We thankfully acknowledge the contribution to this issue made by the following reviewers: Jacob Adeniyi, David Altadill, Eduardo Araujo, Feza Arikan, Dieter Bilitza, Jilijana Cander, Bela Fejer, Tamara Gulyaeva, Manuel Hermindez-Pajares, Ivan Kutiev, John MacDougal, Leo McNamara, Bruno Nava, Olivier Obrou, Elijah Oyeyemi, Vadym Paznukhov, Bodo Reinisch, John Retterer, Phil Richards, Gary Sales, J.H. Sastri, Ludger Scherliess, Iwona Stanislavska, Stamir Stankov, Shin-Yi Su, Manlian Zhang, Y ongliang Zhang, and Irina Zakharenkova. We are grateful to Peggy Ann Shea for her final review and guidance as the editor-in-chief for special issues of Advances in Space Research. We thank the authors for their timely submission and their quick response to the reviewer comments and humbly

An Analysis of 19 International Case Studies of Stress Prevention Through Work Reorganization Using the Demand/Control Model

Science.gov (United States)

Karasek, Robert A.

2004-01-01

Nineteen international case studies of workplace stress prevention initiatives are analyzed. The focus of these cases, which span a variety of workplaces and locations, is on preventing stress through work reorganization rather than remedial approaches for stress relief. It is found that the majority of the occupations represented in the case…

Atoms for peace - the work of the International Atomic Energy Agency

International Nuclear Information System (INIS)

Daglish, J.

1984-01-01

The article deals with the International Atomic Energy Agency (IAEA), which is situated in Vienna. The aims of the IAEA and its work are described. The safeguards system; promotional work; technical cooperation programme; and nuclear safety work concerned with basic safety standards for radiation protection; are all discussed. (U.K.)

Team work on international projects

International Nuclear Information System (INIS)

Hayfield, F.

1983-01-01

A successful team will result in Project efficiency and so lead to a better achievement of the Project objectives. Such a team will be self-motivating and have a high level of morale. An effective team will also create a better context for transfer of know-how and so better prepare its members for greater roles on future Project teams. The nature of Project work forces the process of team building to recognize several facts of life. A Project team can have a life as short as one year and as long as ten years. A team usually consists of people on temporary transfer from different departments yet retaining a link of some sort to their departments of origin. It may consist of members of one company only or of several as in a joint-venture and may include Client personnel. On International Projects, the members of a team may have different nationalities and be working in a language foreign to many of them. Many of the Project people may be expatriates to the Project area on a bachelor or on a married status well away from their head or usual office. Team building is a complex organizational and human process, with no mathematical formula for the ideal solution. It starts with the selection of the right Project Manager who should be a leader, a technocrat manager and an integrator all at the same time. The Project Manager must have the authority to create the organizational and human climate that will motivate to a maximum each member of the team. Each member must understand clearly his role and realize that this contribution to the Project will influence his career development. Loyalty to the Project Manager must be possible and the Departmental Manager has to recognize this necessity. This presentation will indicate the basic steps of a team building process on a typical major international Project

International approaches to tackling corruption: what works and what doesn't?

OpenAIRE

Hough, Dan

2017-01-01

A well-developed set of international anti-corruption tools now exists. These range from broad conventions to focused initiatives in specific policy areas. This article argues that international agreements work best when they are focused and they speak to the common interests of the parties involved. Solutions need to be creative, they need to bring in a broad coalition of stakeholders and they need to be focused on specific problems. International agreements need to help states with good qua...

Model-based internal wave processing

Energy Technology Data Exchange (ETDEWEB)

Candy, J.V.; Chambers, D.H.

1995-06-09

A model-based approach is proposed to solve the oceanic internal wave signal processing problem that is based on state-space representations of the normal-mode vertical velocity and plane wave horizontal velocity propagation models. It is shown that these representations can be utilized to spatially propagate the modal (dept) vertical velocity functions given the basic parameters (wave numbers, Brunt-Vaisala frequency profile etc.) developed from the solution of the associated boundary value problem as well as the horizontal velocity components. Based on this framework, investigations are made of model-based solutions to the signal enhancement problem for internal waves.

Internal Universes in Models of Homotopy Type Theory

DEFF Research Database (Denmark)

Licata, Daniel R.; Orton, Ian; Pitts, Andrew M.

2018-01-01

We show that universes of fibrations in various models of homotopy type theory have an essentially global character: they cannot be described in the internal language of the presheaf topos from which the model is constructed. We get around this problem by extending the internal language with a mo...... that the interval in cubical sets does indeed have. This leads to a completely internal development of models of homotopy type theory within what we call crisp type theory.......We show that universes of fibrations in various models of homotopy type theory have an essentially global character: they cannot be described in the internal language of the presheaf topos from which the model is constructed. We get around this problem by extending the internal language...

Safety in an international work environment: CERN

CERN Document Server

Potter, K.

1990-01-01

The European Laboratory for Particle Physics (CERN) has recently completed a new accelerator. The installation of this accelerator and its experimental areas represents an example of harmonization of safety rules in supranational areas, as CERN is an international organization and the machine is housed in a tunnel of 26.7 km circumference, of which 20 km is on French territory and 6.7 km on Swiss territory. The work was carried out by a large number of firms from all over Europe, CERN staff and physicists and technicians from all over the world, and represented almost 4 million working hours. The safety organization chosen and applied with the agreement of the two host-State safety authorities is described and the resulting application, including the results in terms of accident statistics, from the installation of the machine, experimental areas and detectors are presented.

Adaptive gaze stabilization through cerebellar internal models in a humanoid robot

DEFF Research Database (Denmark)

Vannucci, Lorenzo; Tolu, Silvia; Falotico, Egidio

2016-01-01

Two main classes of reflexes relying on the vestibular system are involved in the stabilization of the human gaze: The vestibulocollic reflex (VCR), which stabilizes the head in space and the vestibulo-ocular reflex (VOR), which stabilizes the visual axis to minimize retinal image motion. The VOR...... on the coordination of VCR and VOR and OKR. The model, inspired on neuroscientific cerebellar theories, is provided with learning and adaptation capabilities based on internal models. Tests on a simulated humanoid platform confirm the effectiveness of our approach....... works in conjunction with the opto-kinetic reflex (OKR), which is a visual feedback mechanism for moving the eye at the same speed as the observed scene. Together they keep the image stationary on the retina. In this work we present the first complete model of gaze stabilization based...

Online self-report questionnaire on computer work-related exposure (OSCWE): validity and internal consistency.

Science.gov (United States)

Mekhora, Keerin; Jalayondeja, Wattana; Jalayondeja, Chutima; Bhuanantanondh, Petcharatana; Dusadiisariyavong, Asadang; Upiriyasakul, Rujiret; Anuraktam, Khajornyod

2014-07-01

To develop an online, self-report questionnaire on computer work-related exposure (OSCWE) and to determine the internal consistency, face and content validity of the questionnaire. The online, self-report questionnaire was developed to determine the risk factors related to musculoskeletal disorders in computer users. It comprised five domains: personal, work-related, work environment, physical health and psychosocial factors. The questionnaire's content was validated by an occupational medical doctor and three physical therapy lecturers involved in ergonomic teaching. Twenty-five lay people examined the feasibility of computer-administered and the user-friendly language. The item correlation in each domain was analyzed by the internal consistency (Cronbach's alpha; alpha). The content of the questionnaire was considered congruent with the testing purposes. Eight hundred and thirty-five computer users at the PTT Exploration and Production Public Company Limited registered to the online self-report questionnaire. The internal consistency of the five domains was: personal (alpha = 0.58), work-related (alpha = 0.348), work environment (alpha = 0.72), physical health (alpha = 0.68) and psychosocial factor (alpha = 0.93). The findings suggested that the OSCWE had acceptable internal consistency for work environment and psychosocial factors. The OSCWE is available to use in population-based survey research among computer office workers.

The Interplay of Work-Family Life and Psychosocial Adjustment for International Graduate Students

OpenAIRE

Bulgan, Gökçe; Çiftçi, Ayşe

2017-01-01

The purpose of this paper is to critically review the literature on the interplay of work-family life and psychosocial adjustment of married international graduate students to the United States, provide evidence for a complicated and integrated support mechanism for married international graduate students, and make specific recommendations. Empirical studies on student and expatriate work-family life and psychosocial adjustment are reviewed. Studies indicated a significant negative relationsh...

Improvement of psychological work in the system of moral and psychological support for the operational activities in the internal affairs personnel

Directory of Open Access Journals (Sweden)

Vladimir L. Kubyshko

2017-12-01

Full Text Available Background. Since psychological work in the Ministry of Internal Affairs of the Russian Federation is one of the professional activities, the departments must perform the tasks of the following two tiers: professionally-based and system-wide. Those tasks of the first tier perform the tree groups of individual and group diagnostics, personal and professional development, and professional and psychological support. When implemented they are determined by system-wide goals, with the main one shaping the patriotic worldview, corporate culture and the significantprofessionalproperties of the employees. Objective. Within the framework of the approach mentioned above, the paper considers static and dynamic models of psychological work in the Ministry of Internal Affairs of the Russian Federation at the present stage, current issues and ways to resolve them are revealed. Progress Report. Based on the brief analysis of the static model of psychological work it is concluded that there are forces and means for the successful accomplishment of the assigned tasks which is confirmed by the external indicators. When considering the on-line dynamic model issues, the issues of scientific and methodological character are identifiedand also the corporate personnel and the systemwide (worldview typeof work are determined. Their essence and content are specified, and also the ways to constructively eliminate these issues are highlighted. Research results. The author emphasizes that the worldviewissues require special consideration as their solution demand a set of measures connected with the extension of the functional duties of the psychologists working in the Ministry of Internal Affairs. Conclusion. In the conditions of negative information and psychological impact on the professional and corporate consciousness of the Ministry of Internal Affairs employees, the increased attention of some researchers to the negative moments of the history of the police when its

Parent-Adolescent Relationship Qualities, Internal Working Models, and Styles as Predictors of Adolescents’ Observed Interactions with Friends

Science.gov (United States)

Shomaker, Lauren B.; Furman, Wyndol

2010-01-01

This study examined how current parent-adolescent relationship qualities and adolescents’ representations of relationships with parents were related to friendship interactions in 200 adolescent-close friend dyads. Adolescents and friends were observed discussing problems during a series of structured tasks. Negative interactions with mothers were significantly related to adolescents’ greater conflict with friends, poorer focus on tasks, and poorer communication skills. Security of working models (as assessed by interview) was significantly associated with qualities of friendship interactions, whereas security of attachment styles (as assessed by questionnaire) was not. More dismissing (vs. secure) working models were associated with poorer focus on problem discussions and weaker communication skills with friends, even after accounting for gender differences and current parent-adolescent relationship qualities. We discuss possible mechanisms for the observed links between dimensions of parent-adolescent relationships and friendships. We also consider methodological and conceptual differences between working model and style measures of attachment representations. PMID:20174459

A Working Framework for Enabling International Science Data System Interoperability

Science.gov (United States)

Hughes, J. Steven; Hardman, Sean; Crichton, Daniel J.; Martinez, Santa; Law, Emily; Gordon, Mitchell K.

2016-07-01

For diverse scientific disciplines to interoperate they must be able to exchange information based on a shared understanding. To capture this shared understanding, we have developed a knowledge representation framework that leverages ISO level reference models for metadata registries and digital archives. This framework provides multi-level governance, evolves independent of the implementation technologies, and promotes agile development, namely adaptive planning, evolutionary development, early delivery, continuous improvement, and rapid and flexible response to change. The knowledge representation is captured in an ontology through a process of knowledge acquisition. Discipline experts in the role of stewards at the common, discipline, and project levels work to design and populate the ontology model. The result is a formal and consistent knowledge base that provides requirements for data representation, integrity, provenance, context, identification, and relationship. The contents of the knowledge base are translated and written to files in suitable formats to configure system software and services, provide user documentation, validate input, and support data analytics. This presentation will provide an overview of the framework, present a use case that has been adopted by an entire science discipline at the international level, and share some important lessons learned.

An investigation of the international literature on nurse practitioner private practice models.

Science.gov (United States)

Currie, J; Chiarella, M; Buckley, T

2013-12-01

To investigate and synthesize the international literature surrounding nurse practitioner (NP) private practice models in order to provide an exposition of commonalities and differences. NP models of service delivery have been established internationally and most are based in the public healthcare system. In recent years, opportunities for the establishment of NP private practice models have evolved, facilitated by changes in legislation and driven by identification of potential patient need. To date, NP private practice models have received less attention in the literature and, to the authors' knowledge, this is the first international investigation of NP private practice models. Integrative literature review. A literature search was undertaken in October 2012. Database sources utilized included Medical Literature Analyses and Retrieval (MEDLINE), the Cumulative Index of Nursing and Allied Health Literature (CINAHL), ProQuest, Scopus and the Cochrane Database of Systematic Reviews (CDSR). The grey literature was also searched. The following Medical Subject Headings (MeSH) and search terms used both individually and in combination included nurse practitioners; private practice; joint practice; collaboration; and insurance, health and reimbursement. Once literature had been identified, a thematic analysis was undertaken to extract themes. Thirty manuscripts and five publications from the grey literature were included in the final review. Private practice NP roles were identified in five countries, with the majority of the literature emanating from the USA. The thematic analysis resulted in the identification of five themes: reimbursement, collaborative arrangements, legislation, models of care and acceptability. Proportionally, there are very few NPs engaged in private practice internationally. The most common NP private practice models were community based, with NPs working in clinic settings, either alone or with other health professionals. Challenges in the

International Work Group Criteria for the Diagnosis of Alzheimer Disease

NARCIS (Netherlands)

Cummings, J.L.; Dubois, B; Molinuevo, J.L.; Scheltens, P.

2013-01-01

Alzheimer-type biomarker changes are identifiable in asymptomatic and mildly symptomatic predementia phases of Alzheimer disease (AD) and AD dementia. The International Work Group (IWG) guidelines for diagnosis identify a unified spectrum of 3 phases. The classic clinical feature that indicates AD

MODEL EVALUASI INTERNAL KOMPETENSI GURU BAHASA INGGRIS (MODEL_EIKGBI SMA

Directory of Open Access Journals (Sweden)

Sahraini Sahraini

2015-10-01

Full Text Available Studi ini bertujuan untuk: (1 mengembangkan model evaluasi kompetensi guru bahasa Inggris SMA yang dapat digunakan untuk mengidentifikasi kelebihan dan kekurangan guru dalam proses pemelajaran dan (2 mengetahui efektivitas implementasi evaluasi internal kompetensi guru bahasa Inggris SMA. Studi ini menggunakan metode penelitian dan pengembangan yang dikembangkan oleh Borg & Gall (1983, p.775. Subjek penelitian berjumlah 17 guru yang berasal dari 7 SMA di Sulawesi Selatan. Konstruk instrumen terdiri atas instrumen untuk mengevaluasi kompetensi guru bahasa Inggris dalam merencanakan pemelajaran, instrumen untuk mengevaluasi kompetensi guru dalam melaksanaan proses pemelajaran, dan instrumen untuk mengevaluai kompetensi guru dalam mengevaluasi hasil proses pemelajaran. Hasil penelitian menunjukkan bahwa instrumen yang dikembangkan dapat digunakan untuk mengevaluasi kompetensi guru bahasa Inggris. Untuk mengetahui sejauh mana tingkat efektivitas Model Evaluasi Internal Kompetensi Guru Bahasa Inggris SMA, model ini kemudian dievaluasi oleh teman sejawat guru bahasa Inggris dan guru bahasa Inggris itu sendiri. Mereka menyimpulkan bahwa komponen dari model tersebut adalah komprehensip, praktis, ekonomis, dan telah didukung oleh instrumen yang valid dan reliabel. Kata kunci: evaluasi internal, model evaluasi, kompetensi guru   INTERNAL EVALUATION MODEL OF ENGLISH TEACHERS’ COMPETENCY (IEMET FOR SENIOR HIGH SCHOOL Abstract High School that can be used to identify the teacher’s strengths and weaknesses in learning and teaching processes and (2 find out the implementation effectiveness of the Internal Evaluation Model of English Teachers’ Competency for Senior High School. This study used research & development methods by following the pattern of phases developed by Borg & Gall (1983, p.775.  The subjects of this study were seventeen English teachers from seven Senior High Schools in South Sulawesi. The constructs of instruments consist of the

Effective model development of internal auditors in the village financial institution

Science.gov (United States)

Arsana, I. M. M.; Sugiarta, I. N.

2018-01-01

Designing an effective audit system is complex and challenging, and a focus on examining how internal audit drive improvement in three core performance dimensions ethicality, efficiency, and effectiveness in organization is needed. The problem of research is how the desain model and peripheral of supporter of effective supervation Village Credit Institution? Research of objectives is yielding the desain model and peripheral of supporter of effective supervation Village Credit Institution. Method Research use data collecting technique interview, observation and enquette. Data analysis, data qualitative before analysed to be turned into quantitative data in the form of scale. Each variable made to become five classificat pursuant to scale of likert. Data analysed descriptively to find supervation level, Structural Equation Model (SEM) to find internal and eksternal factor. So that desain model supervation with descriptive analysis. Result of research desain model and peripheral of supporter of effective supervation Village Credit Institution. The conclusion desain model supported by three sub system: sub system institute yield body supervisor of Village Credit Institution, sub system standardization and working procedure yield standard operating procedure supervisor of Village Credit Institution, sub system education and training yield supervisor professional of Village Credit Institution.

Modelling and Internal Fuzzy Model Power Control of a Francis Water Turbine

Directory of Open Access Journals (Sweden)

Klemen Nagode

2014-02-01

Full Text Available This paper presents dynamic modelling of a Francis turbine with a surge tank and the control of a hydro power plant (HPP. Non-linear and linear models include technical parameters and show high similarity to measurement data. Turbine power control with an internal model control (IMC is proposed, based on a turbine fuzzy model. Considering appropriate control responses in the entire area of turbine power, the model parameters of the process are determined from a fuzzy model, which are further included in the internal model controller. The results are compared to a proportional-integral (PI controller tuned with an integral absolute error (IAE objective function, and show an improved response of internal model control.

ITER [International Thermonuclear Experimental Reactor] shield and blanket work package report

International Nuclear Information System (INIS)

1988-06-01

This report summarizes nuclear-related work in support of the US effort for the International Thermonuclear Experimental Reactor (ITER) Study. The purpose of this work was to prepare for the first international ITER workshop devoted to defining a basic ITER concept that will serve as a basis for an indepth conceptual design activity over the next 2-1/2 years. Primary tasks carried out during the past year included: design improvements of the inboard shield developed for the TIBER concept, scoping studies of a variety of tritium breeding blanket options, development of necessary design guidelines and evaluation criteria for the blanket options, further safety considerations related to nuclear components and issues regarding structural materials for an ITER device. 44 refs., 31 figs., 29 tabs

Towards an integrated model of international migration

Directory of Open Access Journals (Sweden)

Douglas S. MASSEY

2012-12-01

Full Text Available Demographers have yet to develop a suitable integrated model of international migration and consequently have been very poor at forecasting immigration. This paper outlines the basic elements of an integrated model and surveys recent history to suggest the key challenges to model construction. A comprehensive theory must explain the structural forces that create a supply of people prone to migrate internationally, the structural origins of labour demand in receiving countries, the motivations of those who respond to these forces by choosing to migrate internationally, the growth and structure of transnational networks that arise to support international movement, the behaviour states in response to immigrant flows, and the influence of state actions on the behaviour of migrants. Recent history suggests that a good model needs to respect the salience of markets, recognize the circularity of migrant flows, appreciate the power of feedback effects, and be alert unanticipated consequences of policy actions.

Fast flexible modeling of RNA structure using internal coordinates.

Science.gov (United States)

Flores, Samuel Coulbourn; Sherman, Michael A; Bruns, Christopher M; Eastman, Peter; Altman, Russ Biagio

2011-01-01

Modeling the structure and dynamics of large macromolecules remains a critical challenge. Molecular dynamics (MD) simulations are expensive because they model every atom independently, and are difficult to combine with experimentally derived knowledge. Assembly of molecules using fragments from libraries relies on the database of known structures and thus may not work for novel motifs. Coarse-grained modeling methods have yielded good results on large molecules but can suffer from difficulties in creating more detailed full atomic realizations. There is therefore a need for molecular modeling algorithms that remain chemically accurate and economical for large molecules, do not rely on fragment libraries, and can incorporate experimental information. RNABuilder works in the internal coordinate space of dihedral angles and thus has time requirements proportional to the number of moving parts rather than the number of atoms. It provides accurate physics-based response to applied forces, but also allows user-specified forces for incorporating experimental information. A particular strength of RNABuilder is that all Leontis-Westhof basepairs can be specified as primitives by the user to be satisfied during model construction. We apply RNABuilder to predict the structure of an RNA molecule with 160 bases from its secondary structure, as well as experimental information. Our model matches the known structure to 10.2 Angstroms RMSD and has low computational expense.

Internal Motion Estimation by Internal-external Motion Modeling for Lung Cancer Radiotherapy.

Science.gov (United States)

Chen, Haibin; Zhong, Zichun; Yang, Yiwei; Chen, Jiawei; Zhou, Linghong; Zhen, Xin; Gu, Xuejun

2018-02-27

The aim of this study is to develop an internal-external correlation model for internal motion estimation for lung cancer radiotherapy. Deformation vector fields that characterize the internal-external motion are obtained by respectively registering the internal organ meshes and external surface meshes from the 4DCT images via a recently developed local topology preserved non-rigid point matching algorithm. A composite matrix is constructed by combing the estimated internal phasic DVFs with external phasic and directional DVFs. Principle component analysis is then applied to the composite matrix to extract principal motion characteristics, and generate model parameters to correlate the internal-external motion. The proposed model is evaluated on a 4D NURBS-based cardiac-torso (NCAT) synthetic phantom and 4DCT images from five lung cancer patients. For tumor tracking, the center of mass errors of the tracked tumor are 0.8(±0.5)mm/0.8(±0.4)mm for synthetic data, and 1.3(±1.0)mm/1.2(±1.2)mm for patient data in the intra-fraction/inter-fraction tracking, respectively. For lung tracking, the percent errors of the tracked contours are 0.06(±0.02)/0.07(±0.03) for synthetic data, and 0.06(±0.02)/0.06(±0.02) for patient data in the intra-fraction/inter-fraction tracking, respectively. The extensive validations have demonstrated the effectiveness and reliability of the proposed model in motion tracking for both the tumor and the lung in lung cancer radiotherapy.

Self-Determination and Meaningful Work: Exploring Socioeconomic Constraints

Directory of Open Access Journals (Sweden)

Blake A Allan

2016-02-01

Full Text Available This study examined a model of meaningful work among a diverse sample of working adults. From the perspectives of Self-Determination Theory and the Psychology of Working Framework, we tested a structural model with social class and work volition predicting SDT motivation variables, which in turn predicted meaningful work. Partially supporting hypotheses, work volition was positively related to internal regulation and negatively related to amotivation, whereas social class was positively related to external regulation and amotivation. In turn, internal regulation was positively related to meaningful work, whereas external regulation and amotivation were negatively related to meaningful work. Indirect effects from work volition to meaningful work via internal regulation and amotivation were significant, and indirect effects from social class to meaningful work via external regulation and amotivaiton were significant. This study highlights the important relations between SDT motivation variables and meaningful work, especially the large positive relation between internal regulation and meaningful work. However, results also reveal that work volition and social class may play critical roles in predicting internal regulation, external regulation, and amotivation.

Self-Determination and Meaningful Work: Exploring Socioeconomic Constraints.

Science.gov (United States)

Allan, Blake A; Autin, Kelsey L; Duffy, Ryan D

2016-01-01

This study examined a model of meaningful work among a diverse sample of working adults. From the perspectives of Self-Determination Theory and the Psychology of Working Framework, we tested a structural model with social class and work volition predicting SDT motivation variables, which in turn predicted meaningful work. Partially supporting hypotheses, work volition was positively related to internal regulation and negatively related to amotivation, whereas social class was positively related to external regulation and amotivation. In turn, internal regulation was positively related to meaningful work, whereas external regulation and amotivation were negatively related to meaningful work. Indirect effects from work volition to meaningful work via internal regulation and amotivation were significant, and indirect effects from social class to meaningful work via external regulation and amotivation were significant. This study highlights the important relations between SDT motivation variables and meaningful work, especially the large positive relation between internal regulation and meaningful work. However, results also reveal that work volition and social class may play critical roles in predicting internal regulation, external regulation, and amotivation.

Long life technology work at Rockwell International Space Division

Science.gov (United States)

Huzel, D. K.

1974-01-01

This paper presents highlights of long-life technology oriented work performed at the Space Division of Rockwell International Corporation under contract to NASA. This effort included evaluation of Saturn V launch vehicle mechanical and electromechanical components for potential extended life capabilities, endurance tests, and accelerated aging experiments. A major aspect was evaluation of the components at the subassembly level (i.e., at the interface between moving surfaces) through in-depth wear analyses and assessments. Although some of this work is still in progress, preliminary conclusions are drawn and presented, together with the rationale for each. The paper concludes with a summary of the effort still remaining.

Installation technology of reactor internals on shroud replacement work

International Nuclear Information System (INIS)

Miyano, Hiroshi

1999-01-01

Since the replacement of large welded reactor internals much as a core shroud did not have a precedent in the world, quite a few technologies had to be developed. Especially for the installation of new core shroud, jet pumps, core plate and top guide, the accurate weld and fit-up techniques for large structures was required to secure their integrity. The vessel shielding system was utilized to reduce general area dose rate such that all replacement work. For jet pump installation, automatic remote welding machines were used for high radiation area. As for the core shroud, shroud support weld prep machining tool with high accuracy, jacking system to support fit-up, new weld machine for small work space and low heat input weld joint were developed. Shroud replacement work in Fukushima Dai-ichi NPS Unit 3 (1F-3) with application of these development techniques, was successfully accomplished. The technology is applied for 1F-2 replacement work also. (author)

A Model of Successful School Leadership from the International Successful School Principalship Project

Directory of Open Access Journals (Sweden)

David Gurr

2015-03-01

Full Text Available The International Successful School Principalship Project (ISSPP has been actively conducting research about the work of successful principals since 2001. Findings from four project books and eight models derived from this project are synthesised into a model of successful school leadership. Building on Gurr, Drysdale and Mulford’s earlier model, the work of school leaders is described as engaging within the school context to influence student and school outcomes through interventions in teaching and learning, school capacity building, and the wider context. The qualities a leader brings to their role, a portfolio approach to using leadership ideas, constructing networks, collaborations and partnerships, and utilising accountability and evaluation for evidence-informed improvement, are important additional elements. The model is applicable to all in leadership roles in schools.

Reskilled and "Running Ahead": Teachers in an International School Talk about Their Work

Science.gov (United States)

Bailey, Lucy

2015-01-01

This article reports on a study of the professional identity of expatriate teachers working in an international school in Malaysia. It examines the practical, cultural and professional challenges they experienced as they transitioned to an international school setting. Their experiences of curricular, organisational and cultural change are…

An international comparison of models and approaches for the estimation of the radiological exposure of non-human biota

International Nuclear Information System (INIS)

Beresford, Nicholas A.; Balonov, Mikhail; Beaugelin-Seiller, Karine; Brown, Justin; Copplestone, David; Hingston, Joanne L.; Horyna, Jan; Hosseini, Ali; Howard, Brenda J.; Kamboj, Sunita; Nedveckaite, Tatjana; Olyslaegers, Geert; Sazykina, Tatiana; Vives i Batlle, Jordi; Yankovich, Tamara L.; Yu, Charley

2008-01-01

Over the last decade a number of models and approaches have been developed for the estimation of the exposure of non-human biota to ionising radiations. In some countries these are now being used in regulatory assessments. However, to date there has been no attempt to compare the outputs of the different models used. This paper presents the work of the International Atomic Energy Agency's EMRAS Biota Working Group which compares the predictions of a number of such models in model-model and model-data inter-comparisons

Simulation-Based Internal Models for Safer Robots

Directory of Open Access Journals (Sweden)

Christian Blum

2018-01-01

Full Text Available In this paper, we explore the potential of mobile robots with simulation-based internal models for safety in highly dynamic environments. We propose a robot with a simulation of itself, other dynamic actors and its environment, inside itself. Operating in real time, this simulation-based internal model is able to look ahead and predict the consequences of both the robot’s own actions and those of the other dynamic actors in its vicinity. Hence, the robot continuously modifies its own actions in order to actively maintain its own safety while also achieving its goal. Inspired by the problem of how mobile robots could move quickly and safely through crowds of moving humans, we present experimental results which compare the performance of our internal simulation-based controller with a purely reactive approach as a proof-of-concept study for the practical use of simulation-based internal models.

Evaluation of internal noise methods for Hotelling observer models

International Nuclear Information System (INIS)

Zhang Yani; Pham, Binh T.; Eckstein, Miguel P.

2007-01-01

The inclusion of internal noise in model observers is a common method to allow for quantitative comparisons between human and model observer performance in visual detection tasks. In this article, we studied two different strategies for inserting internal noise into Hotelling model observers. In the first strategy, internal noise was added to the output of individual channels: (a) Independent nonuniform channel noise, (b) independent uniform channel noise. In the second strategy, internal noise was added to the decision variable arising from the combination of channel responses. The standard deviation of the zero mean internal noise was either constant or proportional to: (a) the decision variable's standard deviation due to the external noise, (b) the decision variable's variance caused by the external noise, (c) the decision variable magnitude on a trial to trial basis. We tested three model observers: square window Hotelling observer (HO), channelized Hotelling observer (CHO), and Laguerre-Gauss Hotelling observer (LGHO) using a four alternative forced choice (4AFC) signal known exactly but variable task with a simulated signal embedded in real x-ray coronary angiogram backgrounds. The results showed that the internal noise method that led to the best prediction of human performance differed across the studied model observers. The CHO model best predicted human observer performance with the channel internal noise. The HO and LGHO best predicted human observer performance with the decision variable internal noise. The present results might guide researchers with the choice of methods to include internal noise into Hotelling model observers when evaluating and optimizing medical image quality

Development of a new mathematical model of an adult man head for using in internal dose calculation

International Nuclear Information System (INIS)

Facioli, L.M.; Deus, S.F.

1986-01-01

A new mathematical model representing the head region of the adult man had been developed in a more realistic fashion than the existing models in order to achieve an improvement in the accuracy of the internal dose calculations. The specific absorbed fractions had been obtained by program 'ALGAM: a computer program for estimating internal dose from gamma-ray sources in a man phantom', which had been modified to include the model proposed in this work. The new program had been processed for two source organs: thyroid and brain and for 12 incident photon energies ranging from 0,010 to 4,0 MeV. The obtained results, when compared with the Snyder's one, show that the ratio of the specific absorbed fractions in the common organs of the model proposed in this work relative to the Snyder's model, ranged from 0,0543 to 13,2 for the two source organs considered; the ratio distribution along this interval is practically uniform between the above values. (Author) [pt

CTBTO international monitoring system: Status of work in Cameroon and perspectives

International Nuclear Information System (INIS)

Nyobe, J.B.

2002-01-01

The presentation outlines Cameroon's participation in CTBTO programme and its seismic activities. Areas of inter-regional and international cooperation are described. Suggestions are made on ways in which Cameroon can contribute to the work of the commission

International energy market dynamics: a modelling approach. Tome 1

International Nuclear Information System (INIS)

Nachet, S.

1996-01-01

This work is an attempt to model international energy market and reproduce the behaviour of both energy demand and supply. Energy demand was represented using sector versus source approach. For developing countries, existing link between economic and energy sectors were analysed. Energy supply is exogenous for energy sources other than oil and natural gas. For hydrocarbons, exploration-production process was modelled and produced figures as production yield, exploration effort index, etc. The model built is econometric and is solved using a software that was constructed for this purpose. We explore the energy market future using three scenarios and obtain projections by 2010 for energy demand per source and oil natural gas supply per region. Economic variables are used to produce different indicators as energy intensity, energy per capita, etc. (author). 378 refs., 26 figs., 35 tabs., 11 appends

International energy market dynamics: a modelling approach. Tome 2

International Nuclear Information System (INIS)

Nachet, S.

1996-01-01

This work is an attempt to model international energy market and reproduce the behaviour of both energy demand and supply. Energy demand was represented using sector versus source approach. For developing countries, existing link between economic and energy sectors were analysed. Energy supply is exogenous for energy sources other than oil and natural gas. For hydrocarbons, exploration-production process was modelled and produced figures as production yield, exploration effort index, ect. The model build is econometric and is solved using a software that was constructed for this purpose. We explore the energy market future using three scenarios and obtain projections by 2010 for energy demand per source and oil and natural gas supply per region. Economic variables are used to produce different indicators as energy intensity, energy per capita, etc. (author). 378 refs., 26 figs., 35 tabs., 11 appends

Assessing motivation for work environment improvements: internal consistency, reliability and factorial structure.

Science.gov (United States)

Hedlund, Ann; Ateg, Mattias; Andersson, Ing-Marie; Rosén, Gunnar

2010-04-01

Workers' motivation to actively take part in improvements to the work environment is assumed to be important for the efficiency of investments for that purpose. That gives rise to the need for a tool to measure this motivation. A questionnaire to measure motivation for improvements to the work environment has been designed. Internal consistency and test-retest reliability of the domains of the questionnaire have been measured, and the factorial structure has been explored, from the answers of 113 employees. The internal consistency is high (0.94), as well as the correlation for the total score (0.84). Three factors are identified accounting for 61.6% of the total variance. The questionnaire can be a useful tool in improving intervention methods. The expectation is that the tool can be useful, particularly with the aim of improving efficiency of companies' investments for work environment improvements. Copyright 2010 Elsevier Ltd. All rights reserved.

Time Zones, Shift Working and International Outsourcing

OpenAIRE

Matsuoka, Yuji; Fukushima, Marcelo

2009-01-01

We build a trade model with two identical countries located in different time zones and a monopolistically competitive sector of which production requires differentiated goods produced in two successive stages. We introduce shift working disutility and allow consumers to choose between day and night shifts. Shift working disutility raises the cost of night production and firms can reduce costs by “virtually” outsourcing foreign labor. We found that firms only outsource if relat...

New phenomenological and differential model for hot working of metallic polycrystalline materials

International Nuclear Information System (INIS)

Castellanos, J.; Munoz, J.; Gutierrez, V.; Rieiro, I.; Ruano, O. A.; Carsi, M.

2012-01-01

This paper presents a new phenomenological and differential model (that use differential equations) to predict the flow stress of a metallic polycrystalline material under hot working. The model, called MCC, depends on six parameters and uses two internal variables to consider the strain hardening, dynamic recovery and dynamic recrystallization processes that occur under hot working. The experimental validation of the MCC model has been carried out by means of stress-strain curves from torsion tests at high temperature (900 degree centigrade a 1200 degree centigrade) and moderate high strain rate (0.005 s-1 to 5 s-1) in a high nitrogen steel. The results reveal the very good agreement between experimental and predicted stresses. Furthermore, the Garofalo a-parameter and the strain to reach 50 % of recrystallized volume fraction have been employed as a control check being a first step to the physical interpretation of variables and parameters of the MCC model. (Author) 26 refs.

International Space Station Model Correlation Analysis

Science.gov (United States)

Laible, Michael R.; Fitzpatrick, Kristin; Hodge, Jennifer; Grygier, Michael

2018-01-01

This paper summarizes the on-orbit structural dynamic data and the related modal analysis, model validation and correlation performed for the International Space Station (ISS) configuration ISS Stage ULF7, 2015 Dedicated Thruster Firing (DTF). The objective of this analysis is to validate and correlate the analytical models used to calculate the ISS internal dynamic loads and compare the 2015 DTF with previous tests. During the ISS configurations under consideration, on-orbit dynamic measurements were collected using the three main ISS instrumentation systems; Internal Wireless Instrumentation System (IWIS), External Wireless Instrumentation System (EWIS) and the Structural Dynamic Measurement System (SDMS). The measurements were recorded during several nominal on-orbit DTF tests on August 18, 2015. Experimental modal analyses were performed on the measured data to extract modal parameters including frequency, damping, and mode shape information. Correlation and comparisons between test and analytical frequencies and mode shapes were performed to assess the accuracy of the analytical models for the configurations under consideration. These mode shapes were also compared to earlier tests. Based on the frequency comparisons, the accuracy of the mathematical models is assessed and model refinement recommendations are given. In particular, results of the first fundamental mode will be discussed, nonlinear results will be shown, and accelerometer placement will be assessed.

A Work Psychological Model that Works: Expanding the Job Demands-Resources Model

NARCIS (Netherlands)

Xanthopoulou, D.

2007-01-01

The main purpose of the current thesis was to test and expand the recently developed Job Demands-Resources (JD-R) model. The advantage of this model is that it recognizes the uniqueness of each work environment, which has its own specific job demands and job resources. According to the JD-R model,

International Technical Working Group Cooperation to Counter Illicit Nuclear Trafficking

International Nuclear Information System (INIS)

Smith, D K; Niemeyer, S

2004-01-01

The Nuclear Smuggling International Technical Working Group (ITWG) is an international body of nuclear forensic experts that cooperate to deter the illicit trafficking of nuclear materials. The objective of the ITWG is to provide a common approach and effective technical solutions to governments who request assistance in nuclear forensics. The ITWG was chartered in 1996 and since that time more than 28 nations and organizations have participated in 9 international meetings and 2 analytical round-robin trials. Soon after its founding the ITWG adopted a general framework to guide nuclear forensics investigations that includes recommendations for nuclear crime scene security and analysis, the best application of radioanalytical methods, the conduct of traditional forensic analysis of contaminated materials, and effective data analysis to interpret the history of seized nuclear materials. This approach has been adopted by many nations as they respond to incidents of illicit nuclear trafficking

Modelling Cooperative Work at a Medical Department

DEFF Research Database (Denmark)

Christensen, Lars Rune; Hildebrandt, Thomas

2017-01-01

Based on ethnographic fieldwork, and the modelling of work processes at a medical department, this paper considers some of the opportunities and challenges involved in working with models in a complex work setting. The paper introduces a flexible modelling tool to CSCW, called the DCR Portal......, and considers how it may be used to model complex work settings collaboratively. Further, the paper discusses how models created with the DCR portal may potentially play a key role in making a cooperative work ensemble appreciate, discuss and coordinate key interdependencies inherent to their cooperative work...

Quasilinear Extreme Learning Machine Model Based Internal Model Control for Nonlinear Process

Directory of Open Access Journals (Sweden)

Dazi Li

2015-01-01

Full Text Available A new strategy for internal model control (IMC is proposed using a regression algorithm of quasilinear model with extreme learning machine (QL-ELM. Aimed at the chemical process with nonlinearity, the learning process of the internal model and inverse model is derived. The proposed QL-ELM is constructed as a linear ARX model with a complicated nonlinear coefficient. It shows some good approximation ability and fast convergence. The complicated coefficients are separated into two parts. The linear part is determined by recursive least square (RLS, while the nonlinear part is identified through extreme learning machine. The parameters of linear part and the output weights of ELM are estimated iteratively. The proposed internal model control is applied to CSTR process. The effectiveness and accuracy of the proposed method are extensively verified through numerical results.

International Nuclear Model. Volume 3. Program description

International Nuclear Information System (INIS)

Andress, D.

1985-01-01

This is Volume 3 of three volumes of documentation of the International Nuclear Model (INM). This volume presents the Program Description of the International Nuclear Model, which was developed for the Nuclear and Alternate Fuels Division (NAFD), Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), US Department of Energy (DOE). The International Nuclear Model (INM) is a comprehensive model of the commercial nuclear power industry. It simulates economic decisions for reactor deployment and fuel management decision based on an input set of technical economic and scenario parameters. The technical parameters include reactor operating characteristics, fuel cycle timing and mass loss factors, and enrichment tails assays. Economic parameters include fuel cycle costs, financial data, and tax alternatives. INM has a broad range of scenario options covering, for example, process constraints, interregional activities, reprocessing, and fuel management selection. INM reports reactor deployment schedules, electricity generation, and fuel cycle requirements and costs. It also has specialized reports for extended burnup and permanent disposal. Companion volumes to Volume 3 are: Volume 1 - Model Overview, and Volume 2 - Data Base Relationships

International technical working group cooperation to counter illicit nuclear trafficking

International Nuclear Information System (INIS)

Smith, D.K.; Niemeyer, S.

2004-01-01

The Nuclear Smuggling International Technical Working Group (ITWG) is an international group of nuclear forensic experts that cooperate to deter the illicit trafficking of nuclear materials. The objective of the ITWG is to provide a common approach and effective technical solutions to governments who request assistance in nuclear forensics. The ITWG was chartered in 1996 and since that time more than 28 nations and organizations have participated in 9 international meetings and 2 analytical round-robin trials. Soon after its founding the ITWG adopted a general framework to guide nuclear forensics investigations that includes recommendations for nuclear crime scene security and analysis, the best application of radioanalytical methods, the conduct of traditional forensic analysis of contaminated materials, and effective data analysis to interpret the history of seized nuclear materials. This approach has been adopted by many nations as they respond to incidents of illicit nuclear trafficking. ITWG members include policy and decision makers, law enforcement personnel, and scientists with expertise in, and responsibility for, nuclear forensics. (author)

Introduction of the UNIX International Performance Management Work Group

Science.gov (United States)

Newman, Henry

1993-01-01

In this paper we presented the planned direction of the UNIX International Performance Management Work Group. This group consists of concerned system developers and users who have organized to synthesize recommendations for standard UNIX performance management subsystem interfaces and architectures. The purpose of these recommendations is to provide a core set of performance management functions and these functions can be used to build tools by hardware system developers, vertical application software developers, and performance application software developers.

Advances in drainage: Selected works from the Tenth International Drainage Symposium

Science.gov (United States)

Strock, Jeffrey S.; Hay, Christopher; Helmers, Matthew; Nelson, Kelly A.; Sands, Gary R.; Skaggs, R. Wayne; Douglas-Mankin, Kyle R.

2018-01-01

This article introduces a special collection of fourteen articles accepted from among the 140 technical presentations, posters, and meeting papers presented at the 10th International ASABE Drainage Symposium. The symposium continued in the tradition of previous symposia that began in 1965 as a forum for presenting and assessing the progress of drainage research and implementation throughout the world. The articles in this collection address a wide range of topics grouped into five broad categories: (1) crop response, (2) design and management, (3) hydrology and scale, (4) modeling, and (5) water quality. The collection provides valuable information for scientists, engineers, planners, and others working on crop production, water quality, and water quantity issues affected by agricultural drainage. The collection also provides perspectives on the challenges of increasing agricultural production in a changing climate, with ever-greater attention to water quality and quantity concerns that will require integrated technical, economic, and social solutions.

Internal Stress in a Model Elasto-Plastic Fluid

OpenAIRE

Ooshida, Takeshi; Sekimoto, Ken

2004-01-01

Plastic materials can carry memory of past mechanical treatment in the form of internal stress. We introduce a natural definition of the vorticity of internal stress in a simple two-dimensional model of elasto-plastic fluids, which generates the internal stress. We demonstrate how the internal stress is induced under external loading, and how the presence of the internal stress modifies the plastic behavior.

International-local remuneration differences across six countries: do they undermine poverty reduction work?

Science.gov (United States)

Carr, Stuart C; McWha, Ishbel; Maclachlan, Malcolm; Furnham, Adrian

2010-10-01

Despite the rhetoric of a single global economy, professionals in poorer countries continue to be remunerated differently depending on whether they are compensated at a local vs. international rate. Project ADDUP (Are Development Discrepancies Undermining Performance?) surveyed 1290 expatriate and local professionals (response rate = 47%) from aid, education, government, and business sectors in (1) Island Nations (Papua New Guinea, Solomon Islands), (2) landlocked economies (Malaŵi, Uganda), and (3) emerging economies (India, China). Difference in pay was estimated using purchasing power parity, from the World Bank's World Development Indicators 2007. Psychological measures included self-reported pay and benefits (remuneration), self-attributed ability, remuneration comparison, sense of justice in remuneration, remuneration-related motivation, thoughts of turnover and thoughts about international mobility. We included control measures of candour, culture shock, cultural values (horizontal/vertical individualism/collectivism), personality (from the "big five"), job satisfaction and work engagement. Controlling for these and country (small effects) and organization effects (medium), (a) pay ratios between international and local workers exceeded what were perceived to be acceptable pay thresholds among respondents remunerated locally; who also reported a combination of a sense of relative (b) injustice and demotivation; which (c) together with job satisfaction/work engagement predicted turnover and international mobility. These findings question the wisdom of dual salary systems in general, expose and challenge a major contradiction between contemporary development policy and practice, and have a range of practical, organizational, and theoretical implications for poverty reduction work.

The Culture-Work-Health Model and Work Stress.

Science.gov (United States)

Peterson, Michael; Wilson, John F.

2002-01-01

Examines the role of organizational culture in the etiology of workplace stress through the framework of the Culture-Work- Health model. A review of relevant business and health literature indicates that culture is an important component of work stress and may be a key to creating effective organizational stress interventions. (SM)

Combustion modeling in internal combustion engines

Science.gov (United States)

Zeleznik, F. J.

1976-01-01

The fundamental assumptions of the Blizard and Keck combustion model for internal combustion engines are examined and a generalization of that model is derived. The most significant feature of the model is that it permits the occurrence of unburned hydrocarbons in the thermodynamic-kinetic modeling of exhaust gases. The general formulas are evaluated in two specific cases that are likely to be significant in the applications of the model.

The work programme of EURADOS on internal and external dosimetry.

Science.gov (United States)

Rühm, W; Bottollier-Depois, J F; Gilvin, P; Harrison, R; Knežević, Ž; Lopez, M A; Tanner, R; Vargas, A; Woda, C

2018-01-01

Since the early 1980s, the European Radiation Dosimetry Group (EURADOS) has been maintaining a network of institutions interested in the dosimetry of ionising radiation. As of 2017, this network includes more than 70 institutions (research centres, dosimetry services, university institutes, etc.), and the EURADOS database lists more than 500 scientists who contribute to the EURADOS mission, which is to promote research and technical development in dosimetry and its implementation into practice, and to contribute to harmonisation of dosimetry in Europe and its conformance with international practices. The EURADOS working programme is organised into eight working groups dealing with environmental, computational, internal, and retrospective dosimetry; dosimetry in medical imaging; dosimetry in radiotherapy; dosimetry in high-energy radiation fields; and harmonisation of individual monitoring. Results are published as freely available EURADOS reports and in the peer-reviewed scientific literature. Moreover, EURADOS organises winter schools and training courses on various aspects relevant for radiation dosimetry, and formulates the strategic research needs in dosimetry important for Europe. This paper gives an overview on the most important EURADOS activities. More details can be found at www.eurados.org .

Internal models of limb dynamics and the encoding of limb state

Science.gov (United States)

Hwang, Eun Jung; Shadmehr, Reza

2005-09-01

Studies of reaching suggest that humans adapt to novel arm dynamics by building internal models that transform planned sensory states of the limb, e.g., desired limb position and its derivatives, into motor commands, e.g., joint torques. Earlier work modeled this computation via a population of basis elements and used system identification techniques to estimate the tuning properties of the bases from the patterns of generalization. Here we hypothesized that the neural representation of planned sensory states in the internal model might resemble the signals from the peripheral sensors. These sensors normally encode the limb's actual sensory state in which movement errors occurred. We developed a set of equations based on properties of muscle spindles that estimated spindle discharge as a function of the limb's state during reaching and drawing of circles. We then implemented a simulation of a two-link arm that learned to move in various force fields using these spindle-like bases. The system produced a pattern of adaptation and generalization that accounted for a wide range of previously reported behavioral results. In particular, the bases showed gain-field interactions between encoding of limb position and velocity, very similar to the gain fields inferred from behavioral studies. The poor sensitivity of the bases to limb acceleration predicted behavioral results that were confirmed by experiment. We suggest that the internal model of limb dynamics is computed by the brain with neurons that encode the state of the limb in a manner similar to that expected of muscle spindle afferents.

What does an intern doctor actually do? A quantification of time on work activities

Directory of Open Access Journals (Sweden)

James Jia Jun Chen

2017-12-01

Full Text Available Background Interns, or first year junior doctors, have traditionally been used as an adaptable frontline solution to many of the changes in healthcare, utilising their broad skill sets for both direct patient care and administrative burdens. While there are studies that focus on the total hours junior doctors work, there are few that analyse the specific tasks they do and how they dedicate their work time. Aims We aim to quantify the amount of time intern doctors spent on specific tasks during a shift. Methods This is a multi-centred, retrospective, self-reported study that was carried out in a public tertiary hospital network in Western Australia, comprising one tertiary, two metropolitan, and three regional hospitals. 68 individual shifts were reported, accounting for 605.72 hours. Participants reported time spent, in fifteen minute segments, on categories grossly defined as clerical tasks, clinical tasks, teaching, and personal time. Participants were also asked about their satisfaction with the amount of clinical exposure during the reported shift. Results Direct patient care accounted for 22 per cent of total shift time, indirect care 74 per cent, and personal time 4 per cent. Discharge summaries accounted for the most time-per-shift at 26 per cent, followed by medical note documentation at 14 per cent, with the least being teaching at 2 per cent. Direct patient contact by interns during a shift was on average 12 per cent (SD 14 per cent. 12 interns or 18 per cent of all responses reported no direct patient contact (0 per cent during a shift. Interns working in emergency medicine spent 44 per cent of their shift on direct patient contact, significantly more compared to their medicine and surgical colleagues. Conclusion Indirect care activities consume almost three times as much time as direct care activities. Interns are mostly unsatisfied with their amount of clinical exposure per shift. The results concur with the current literature of

[en] The new international agendas: what role for social work?

Directory of Open Access Journals (Sweden)

Jim Ife

2010-06-01

Full Text Available If social work is to be truly international, it needs to address newly emerging international issues, specifically terrorism and global warming. Both of these raise profound implications for human rights and social justice, and hence social workers have significant contributions to make to addressing such issues. However to do so, social workers in western countries will need also to accept the loss of legitimacy of the western modernity, so that their theory and practice can be influenced by post-colonial writers and alternative knowledges and wisdoms from the global south, and from indigenous people. A number of curriculum proposals are made, with a view to developing more appropriate international social work education programs. Si el trabajo social tiene que ser verdaderamente internacional, necesita dirigirse a los emergentes acontecimientos recientes, específicamente al terrorismo y al calentamiento global. Estos dos temas originan profundas implicaciones para los derechos humanos y la justicia social, y por ello, los trabajadores sociales tienen contribuciones significativas al respecto. Aún así, para poder hacer esto, los trabajadores sociales de los países occidentales necesitan aceptar la pérdida de legitimidad de la modernidad occidental, de forma que su teoría y práctica pueda ser influenciada por escritores postcoloniales y conocimientos y saberse alternativos del sur global y de las personas indígenas. Se realizan un número de propuestas curriculares con la perspectiva de desarrollar programas educativos internacionales en el trabajo social más apropiados

Internal Representational Models of Attachment Relationships.

Science.gov (United States)

Crittenden, Patricia M.

This paper outlines several properties of internal representational models (IRMs) and offers terminology that may help to differentiate the models. Properties of IRMs include focus, memory systems, content, cognitive function, "metastructure," quality of attachment, behavioral strategies, and attitude toward attachment. An IRM focuses on…

Personal Digital Assistant-Based Self-Work Sampling Study of Pediatric Interns Quantifies Workday and Educational Value.

Science.gov (United States)

Campbell, Joyce K; Ortiz, Michael V; Ottolini, Mary C; Birch, Sarah; Agrawal, Dewesh

2017-04-01

Optimizing clinical proficiency and education of residents has become more important with restricted residency duty hours. Our objective was to investigate how interns spend their time on inpatient rotations and the perceived educational value of workday activities. We performed a descriptive self-work sampling study using a personal digital assistant (PDA) to randomly query interns on inpatient rotations in real time regarding their activity and the perceived educational value of that activity on a 4-point Likert scale. A total of 31 interns participated on 88 workdays over a 5-month period, generating 2082 samples from which the average workday was modeled. Time spent using the electronic health record (EHR) accounted for 33% of intern time, communicating with the health care team 23%, educational activities 17%, and time with patients and families 12%. Time with patients and families was perceived to be the most educational part of clinical service. Time spent using the EHR was perceived as the least educational. Interns perceived clinical service as excellent or good 37% of the time, while planned educational activities were perceived as excellent or good 81% of the time. Interns spend the majority of their time using the EHR and communicating with the health care team. Interns perceive time spent in planned educational activities has more educational value than time spent in clinical service. The distribution of daily activities is discordant with the perceived educational value of those activities. Copyright © 2016 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

A Qualitative Study of Work-Life Choices in Academic Internal Medicine

Science.gov (United States)

Isaac, Carol; Byars-Winston, Angela; McSorley, Rebecca; Schultz, Alexandra; Kaatz, Anna; Carnes, Mary L.

2014-01-01

The high attrition rate of female physicians pursuing an academic medicine research career has not been examined in the context of career development theory. We explored how internal medicine residents and faculty experience their work within the context of their broader life domain in order to identify strategies for facilitating career…

Mechanical spectroscopy, internal friction and ultrasonic attenuation: Collection of works

International Nuclear Information System (INIS)

Magalas, L.B.

2009-01-01

An extensive collection of recommended books and proceedings from numerous conferences on internal friction, mechanical spectroscopy, and ultrasonic attenuation is provided. Reflecting the complicated history of the 20th century, books published in English and in Russian are presented in two separate sections. International and national conferences organized in various countries are listed. Supplementary lists referring to conferences held in the People's Republic of China, Poland, Russia, the Soviet Union, and Ukraine are also provided. The interesting evolution of mechanical spectroscopy from internal friction and ultrasonic attenuation in solids is clearly demonstrated, and a choice list of retrospective papers illustrates the evolution of the field. A brief review of mechanical spectroscopy, therefore, is included. Numerous research areas investigated by internal friction and mechanical spectroscopy are addressed, including point defect relaxations, electronic and phonon relaxations, dislocation relaxations, grain boundary relaxations, domain induced relaxations (magnetic, ferroelectric), magnetomechanical relaxations, phase transformations, glass transitions, interface effects as well as a wide array of applications specific to physics and materials science. For many years now, there has been a definite need to provide a thorough list of references that might cover major national conferences and books published in English and other languages. This work strives to achieve this goal.

Behaviour of core internals. Proceedings of the IAEA specialists meeting. Working document

International Nuclear Information System (INIS)

1998-01-01

This meeting was organized by the IAEA within the framework of its International Working Group on Life Management of Nuclear Power Plants. It was held in Rez near Prague on the 6-8 October 1998. The purpose of the meeting was to provide an international forum for discussion on recent results in research and utility experience and to provide recommendations for future developments in NPP life management programmes. 12 papers were presented during 3 sessions. Individual abstracts have been prepared for each of the papers

Kazakhstan participation in International Experimental Reactor ITER Construction project. Work status and prospects

International Nuclear Information System (INIS)

Tazhibayeva, I.L.; Tukhvatullin, Sh.T.; Shestakov, V.P.; Kuznetsov, B.A.

2002-01-01

Kazakhstan takes part in ITER project in partnership with Russian Federation since the year of 1994. At present the technical stage of the project is completed and ITER Council should take a decision on the site for international reactor. Four countries such as Canada, Japan, Spain and France have offered their territories for being used as site for launching ITER construction. ITER partners started preparing new international agreement that will cover activities on construction, operation and decommissioning of ITER. It will also include the list of research and experimental work that is conducted in support of ITER project. Kazakhstan has already made an important contribution into technical stage realization of ITER project due to scientific and technical researches conducted by National Nuclear Center, by Institute of Experimental and Theoretical Physics and by JSC 'Ulba Metallurgical plant' ('UMP'). Research activity carried out for the support of ITER project is performed in accordance with the following main trends: Tritium safety (permeability and retentin of hydrogen isotopes during in-pile irradiation in various structural materials, co-deposed layers and protective coatings); Verification of computer codes (LOCA type) loss of coolant accidents modeling in ITER reactor; Investigation of liquid metal blanket of thermonuclear reactor (tritium production in lithium containing eutectics Li17Pb83 and ceramics Li 2 TiO 3 , study of tritium permeability). At present the working group of ITER project participants started introducing proposals for cost distribution and for placing the orders on reactor construction. Further Kazakhstan participation in ITER project may be in manufacturing high-tech parts and assemblies from commercial grades of beryllium. They will be used for armouring the reactor first wall, for its thermal protection and for protection of superconductor's components for magnetic systems that are at JSC U MP'. Scientific and technical support of

76 FR 58049 - Atomic Safety and Licensing Board; Honeywell International, Inc.; Metropolis Works Uranium...

Science.gov (United States)

2011-09-19

... NUCLEAR REGULATORY COMMISSION [Docket No. 40-3392-MLA; ASLBP No. 11-910-01-MLA-BD01] Atomic Safety and Licensing Board; Honeywell International, Inc.; Metropolis Works Uranium Conversion Facility... assurance for its Metropolis Works uranium conversion facility in Metropolis, Illinois. \\1\\ LBP-11-19, 74...

A Normative Model of Work Team Effectiveness

Science.gov (United States)

1983-11-01

aspect of group design that often has been overlooked by both scholars and managers interested in work team effectiveness. Organizatinal ContextII...with other groups or higher management. Yet it is not always a good idea to decide in advance about the leadership structure of a work group. If a group...has been designed well and helped to begin exploring the group norms and member roles it wishes to have, questions of internal leadership should

An International Study of the Gendered Nature of Academic Work: Some Cross-Cultural Explorations.

Science.gov (United States)

Poole, Millicent; Bornholt, Laurel; Summers, Fiona

1997-01-01

Examines gender-related nature of academic work, based on an international survey of college and university faculty. Describes commonalities for areas of discrimination among men and women faculty in Australia, Germany, Hong Kong, Israel, Mexico, Sweden, United Kingdom, and United States. Focuses on working conditions, professional activities…

Applying mathematical models to predict resident physician performance and alertness on traditional and novel work schedules.

Science.gov (United States)

Klerman, Elizabeth B; Beckett, Scott A; Landrigan, Christopher P

2016-09-13

In 2011 the U.S. Accreditation Council for Graduate Medical Education began limiting first year resident physicians (interns) to shifts of ≤16 consecutive hours. Controversy persists regarding the effectiveness of this policy for reducing errors and accidents while promoting education and patient care. Using a mathematical model of the effects of circadian rhythms and length of time awake on objective performance and subjective alertness, we quantitatively compared predictions for traditional intern schedules to those that limit work to ≤ 16 consecutive hours. We simulated two traditional schedules and three novel schedules using the mathematical model. The traditional schedules had extended duration work shifts (≥24 h) with overnight work shifts every second shift (including every third night, Q3) or every third shift (including every fourth night, Q4) night; the novel schedules had two different cross-cover (XC) night team schedules (XC-V1 and XC-V2) and a Rapid Cycle Rotation (RCR) schedule. Predicted objective performance and subjective alertness for each work shift were computed for each individual's schedule within a team and then combined for the team as a whole. Our primary outcome was the amount of time within a work shift during which a team's model-predicted objective performance and subjective alertness were lower than that expected after 16 or 24 h of continuous wake in an otherwise rested individual. The model predicted fewer hours with poor performance and alertness, especially during night-time work hours, for all three novel schedules than for either the traditional Q3 or Q4 schedules. Three proposed schedules that eliminate extended shifts may improve performance and alertness compared with traditional Q3 or Q4 schedules. Predicted times of worse performance and alertness were at night, which is also a time when supervision of trainees is lower. Mathematical modeling provides a quantitative comparison approach with potential to aid

The affective shift model of work engagement.

Science.gov (United States)

Bledow, Ronald; Schmitt, Antje; Frese, Michael; Kühnel, Jana

2011-11-01

On the basis of self-regulation theories, the authors develop an affective shift model of work engagement according to which work engagement emerges from the dynamic interplay of positive and negative affect. The affective shift model posits that negative affect is positively related to work engagement if negative affect is followed by positive affect. The authors applied experience sampling methodology to test the model. Data on affective events, mood, and work engagement was collected twice a day over 9 working days among 55 software developers. In support of the affective shift model, negative mood and negative events experienced in the morning of a working day were positively related to work engagement in the afternoon if positive mood in the time interval between morning and afternoon was high. Individual differences in positive affectivity moderated within-person relationships. The authors discuss how work engagement can be fostered through affect regulation. (c) 2011 APA, all rights reserved.

SME International Business Models: The Role of Context and Experience

DEFF Research Database (Denmark)

Child, John; Hsieh, Linda; Elbanna, Said

2017-01-01

This paper addresses two questions through a study of 180 SMEs located in contrasting industry and home country contexts. First, which business models for international markets prevail among SMEs and do they configure into different types? Second, which factors predict the international business...... models that SMEs follow? Three distinct international business models (traditional market-adaptive, technology exploiter, and ambidextrous explorer) are found among the SMEs studied. The likelihood of SMEs adopting one business model rather than another is to a high degree predictable with reference...

How Do Internal and External CSR Affect Employees' Organizational Identification? A Perspective from the Group Engagement Model.

Science.gov (United States)

Hameed, Imran; Riaz, Zahid; Arain, Ghulam A; Farooq, Omer

2016-01-01

The literature examines the impact of firms' corporate social responsibility (CSR) activities on employees' organizational identification without considering that such activities tend to have different targets. This study explores how perceived external CSR (efforts directed toward external stakeholders) and perceived internal CSR (efforts directed toward employees) activities influence employees' organizational identification. In so doing, it examines the alternative underlying mechanisms through which perceived external and internal CSR activities build employees' identification. Applying the taxonomy prescribed by the group engagement model, the study argues that the effects of perceived external and internal CSR flow through two competing mechanisms: perceived external prestige and perceived internal respect, respectively. Further, it is suggested that calling orientation (how employees see their work contributions) moderates the effects induced by these alternative forms of CSR. The model draws on survey data collected from a sample of 414 employees across five large multinationals in Pakistan. The results obtained using structural equation modeling support these hypotheses, reinforcing the notion that internal and external CSR operate through different mediating mechanisms and more interestingly employees' calling orientation moderates these relationships to a significant degree. Theoretical contributions and practical implications of results are discussed in detail.

International Geomagnetic Reference Field

DEFF Research Database (Denmark)

Finlay, Chris; Maus, S.; Beggan, C. D.

2010-01-01

The eleventh generation of the International Geomagnetic Reference Field (IGRF) was adopted in December 2009 by the International Association of Geomagnetism and Aeronomy Working Group V‐MOD. It updates the previous IGRF generation with a definitive main field model for epoch 2005.0, a main field...... model for epoch 2010.0, and a linear predictive secular variation model for 2010.0–2015.0. In this note the equations defining the IGRF model are provided along with the spherical harmonic coefficients for the eleventh generation. Maps of the magnetic declination, inclination and total intensity...

Ethical Issues Concerning the Use of Videoconferencing To Supervise International Social Work Field Practicum Students.

Science.gov (United States)

Panos, Patrick T.; Panos, Angelea; Cox, Shirley E.; Roby, Jini L.; Matheson, Kenneth W.

2002-01-01

Examines current ethical guidelines affecting the use of videoconferencing in the supervision of social work students nationally and internationally. Suggests protocols to address ethical and professional practice issues that are likely to arise as a result of using videoconferencing to conduct supervision across international borders. (EV)

The role of out-of-class work of doctor-interns in improving qualitive academic progress on clinical immunology and allergology under the primary specialization “Internal diseases”.

Directory of Open Access Journals (Sweden)

G. P. Kuz'mina

2018-04-01

Full Text Available The use of independent out-of-class work of interns on the specialty "Internal diseases" in the section of clinical immunology and allergology promoted the improvement of the qualitative success of interns.

BIOMOVS: an international model validation study

International Nuclear Information System (INIS)

Haegg, C.; Johansson, G.

1988-01-01

BIOMOVS (BIOspheric MOdel Validation Study) is an international study where models used for describing the distribution of radioactive and nonradioactive trace substances in terrestrial and aquatic environments are compared and tested. The main objectives of the study are to compare and test the accuracy of predictions between such models, explain differences in these predictions, recommend priorities for future research concerning the improvement of the accuracy of model predictions and act as a forum for the exchange of ideas, experience and information. (author)

BIOMOVS: An international model validation study

International Nuclear Information System (INIS)

Haegg, C.; Johansson, G.

1987-01-01

BIOMOVS (BIOspheric MOdel Validation Study) is an international study where models used for describing the distribution of radioactive and nonradioactive trace substances in terrestrial and aquatic environments are compared and tested. The main objectives of the study are to compare and test the accuracy of predictions between such models, explain differences in these predictions, recommend priorities for future research concerning the improvement of the accuracy of model predictions and act as a forum for the exchange of ideas, experience and information. (orig.)

The programme of work on committee 2 of ICRP on internal dosimetry

International Nuclear Information System (INIS)

Stather, J.W.

1997-01-01

Committee 2 of ICRP has the responsibility for establishing secondary standards based on the Commission's recommended dose limits. The Committee has an extensive programme of work related to internally incorporated radionuclides which was reviewed at its September, 1997 meeting in Oxford, England. It is summarized below. (author)

Self-organized Criticality Model for Ocean Internal Waves

International Nuclear Information System (INIS)

Wang Gang; Hou Yijun; Lin Min; Qiao Fangli

2009-01-01

In this paper, we present a simple spring-block model for ocean internal waves based on the self-organized criticality (SOC). The oscillations of the water blocks in the model display power-law behavior with an exponent of -2 in the frequency domain, which is similar to the current and sea water temperature spectra in the actual ocean and the universal Garrett and Munk deep ocean internal wave model [Geophysical Fluid Dynamics 2 (1972) 225; J. Geophys. Res. 80 (1975) 291]. The influence of the ratio of the driving force to the spring coefficient to SOC behaviors in the model is also discussed. (general)

11. International conference on WWER fuel performance, modelling and experimental support. Proceedings

International Nuclear Information System (INIS)

Manolova, M.; Boneva, S.; Mitev, M.

2015-01-01

This publication is a compilation of the papers presented in 11th International Conference on WWER Fuel Performance, Modeling and Experimental Support, organized by the Institute for Nuclear Research and Nuclear Energy (INRNE) of the Bulgarian Academy of Sciences in co-operation with the International Atomic Energy Agency (IAEA), Vienna, Austria, supported by the Kozloduy Nuclear Power Plant (KNPP), the Bulgarian Nuclear Regulatory Agency, and TVEL Fuel Company, Russia. The Conference took place in hotel Bolero, Golden Sands Resort, Bulgaria, from 26 September 2015 to 3 October 2015. It was attended by 117 participants, among them more than 100 experts and specialists from 22 countries, including representatives of 3 international organizations, 16 Russian organizations and other 36 foreign institutes, nuclear fuel plants, nuclear power plants and organizations responsible for WWER and PWR fuel design, manufacturing and research, and 3 Bulgarian organizations, working for the Bulgarian nuclear industry. 70 papers have been presented in the Conference in 6 oral and 1 poster session, covering: (1) general overview lectures; (2) fuel performance and operational experience; (3) fuel modeling and experimental support; (4) fuel safety and QA; (5) spent fuel performance and management; (6) specific issues of WWER-1000 fuel reliability. The proceedings provide Summary, Conclusions and Recommendations of the Conference, together with the full text of the presentations. IAEA Technical Meeting (TM) “Achieving zero fuel failure rates: challenges and perspectives”, 1 – 2 October 2015 was organized in conjunction with the 11th International Conference on WWER Fuel Performance, Modelling and Experimental Support. The reports presented on TM sessions are included in the Conference Proceedings too

Technical report on implementation of reactor internal 3D modeling and visual database system

International Nuclear Information System (INIS)

Kim, Yeun Seung; Eom, Young Sam; Lee, Suk Hee; Ryu, Seung Hyun

1996-06-01

In this report was described a prototype of reactor internal 3D modeling and VDB system for NSSS design quality improvement. For improving NSSS design quality several cases of the nuclear developed nation's integrated computer aided engineering system, such as Mitsubishi's NUWINGS (Japan), AECL's CANDID (Canada) and Duke Power's PASCE (USA) were studied. On the basis of these studies the strategy for NSSS design improvement system was extracted and detail work scope was implemented as follows : 3D modelling of the reactor internals were implemented by using the parametric solid modeler, a prototype system of design document computerization and database was suggested, and walk-through simulation integrated with 3D modeling and VDB was accomplished. Major effects of NSSS design quality improvement system by using 3D modeling and VDB are the plant design optimization by simulation, improving the reliability through the single design database system and engineering cost reduction by improving productivity and efficiency. For applying the VDB to full scope of NSSS system design, 3D modelings of reactor coolant system and nuclear fuel assembly and fuel rod were attached as appendix. 2 tabs., 31 figs., 7 refs. (Author) .new

Technical report on implementation of reactor internal 3D modeling and visual database system

Energy Technology Data Exchange (ETDEWEB)

Kim, Yeun Seung; Eom, Young Sam; Lee, Suk Hee; Ryu, Seung Hyun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1996-06-01

In this report was described a prototype of reactor internal 3D modeling and VDB system for NSSS design quality improvement. For improving NSSS design quality several cases of the nuclear developed nation`s integrated computer aided engineering system, such as Mitsubishi`s NUWINGS (Japan), AECL`s CANDID (Canada) and Duke Power`s PASCE (USA) were studied. On the basis of these studies the strategy for NSSS design improvement system was extracted and detail work scope was implemented as follows : 3D modelling of the reactor internals were implemented by using the parametric solid modeler, a prototype system of design document computerization and database was suggested, and walk-through simulation integrated with 3D modeling and VDB was accomplished. Major effects of NSSS design quality improvement system by using 3D modeling and VDB are the plant design optimization by simulation, improving the reliability through the single design database system and engineering cost reduction by improving productivity and efficiency. For applying the VDB to full scope of NSSS system design, 3D modelings of reactor coolant system and nuclear fuel assembly and fuel rod were attached as appendix. 2 tabs., 31 figs., 7 refs. (Author) .new.

Activities of the IAEA International Working Group on Life Management of Nuclear Power Plants (IWG-LMNPP)

International Nuclear Information System (INIS)

Ianko, L.

1994-01-01

Activities of the IAEA international working group on life management of nuclear power plants are outlined with emphasis on objectives, scope of activities, methods of work, organizational matters, financing

Testing and analysis of internal hardwood log defect prediction models

Science.gov (United States)

R. Edward Thomas

2011-01-01

The severity and location of internal defects determine the quality and value of lumber sawn from hardwood logs. Models have been developed to predict the size and position of internal defects based on external defect indicator measurements. These models were shown to predict approximately 80% of all internal knots based on external knot indicators. However, the size...

The work of the international commission on radiological protection

International Nuclear Information System (INIS)

Clarke, R.H.

1996-01-01

ICRP was established in 1928 as the International X-ray and Radium Protection Committee. In 1950 the name was changed to reflect the wider scope of radiological protection. The present membership of the Main Commission and its four committees was established in July 1993 for the period 1993-1997. Their programmes of work are now nearing completion with the Committees having met four times and their progress is summarised. The Main Commission meets in November 1996, when one of the main topics will be the election of the new Commission and members of the four Committees for the period 1997-2001

Family boundary characteristics, work-family conflict and life satisfaction: A moderated mediation model.

Science.gov (United States)

Qiu, Lin; Fan, Jinyan

2015-10-01

Although work-family border and boundary theory suggest individuals' boundary characteristics influence their work-family relationship, it is largely unknown how boundary flexibility and permeability mutually influence work-family conflict and subsequent employee outcomes. Moreover, the existing work-family conflict research has been mainly conducted in the United States and other Western countries. To address these gaps in the work-family literature, the present study examines a moderated mediation model regarding how family boundary characteristics may influence individuals' work-family conflict and life satisfaction with a sample of 278 Chinese full-time employees. Results showed that employees' family flexibility negatively related to their perceived work interference with family (WIF) and family interference with work (FIW), and both these two relationships were augmented by individuals' family permeability. In addition, WIF mediated the relationship between family flexibility and life satisfaction; the indirect effect of family flexibility on life satisfaction via WIF was stronger for individuals with higher family permeability. The theoretical and managerial implications of these findings are discussed. © 2014 International Union of Psychological Science.

CERN’s model for international scientific collaboration to be discussed at UNOG

CERN Multimedia

Antonella Del Rosso

2015-01-01

On 2 November, on the occasion of the 70th anniversary of the United Nations, CERN and UNOG will co-host a one-day symposium, with the support of Switzerland and France. The event will bring together policy-makers, scientists and members of civil society to debate how to construct synergies across communities as a means to drive global objectives. CERN people are invited to the Palais des Nations to take part.   CERN's seat at the General Assembly of the United Nations in New York. How does CERN work? How are goals achieved in such a complex environment where diverse communities work together in the interests of science? CERN’s model for international scientific collaboration is being looked at with growing interest by an increasingly large community of experts in various fields. Scientific advances and accomplishments are testament to the effectiveness of the model and prove that ambitious scientific programmes can be carried out only by communities c...

Russia’s 2015 BRICS Presidency: Models of Engagement with International Organizations

Directory of Open Access Journals (Sweden)

Marina Larionova

2016-09-01

Full Text Available Six years after the first 2009 summit in Yekaterinburg, the BRICS grouping of Brazil, Russia, India, China and South Africa has established its identity as an informal global governance forum. The members have consistently consolidated their cooperation, expanded and deepened their agenda, coordinated efforts aimed at the recovery and growth of their economies, and engaged with other international organizations. This work continued during the Russian presidency in 2015. This article focuses on one dimension of BRICS performance: its engagement with international organizations. Atleast three reasons define the relevance of this analysis. First, since its launch the BRICS members collectively committed tobuilding a multipolar, fair and democratic world order, which would not be possible without cooperating with key international organizations. Second, the objective of enhancing the sustainability, legitimacy and effectiveness of the global governance architecture defines the need for the flexible combination of different models of engagement of summit institutions with other international institutions. Third, according to Russia’s BRICS Presidency Concept, one of its priorities was to transition to a qualitatively new level of engagement with international organizations.The analytical framework for this study thus builds on the theory of rational choice institutionalism. The calculus approach fits the analysis of summit institutions bringing together states from a wide range of cultures, continents and economic development. Its distinctive features clearly apply to the analysis of the origin and performance of the BRICS. First, members act in a highly strategic manner to attain their priorities. Second, summitry presents an arrangement where strategic interaction among leaders plays a major role in determining political outcomes. Third, rational choice institutionalism offers the greatest analytical leverage to settings where consensus among

Modeling the internal combustion engine

Science.gov (United States)

Zeleznik, F. J.; Mcbride, B. J.

1985-01-01

A flexible and computationally economical model of the internal combustion engine was developed for use on large digital computer systems. It is based on a system of ordinary differential equations for cylinder-averaged properties. The computer program is capable of multicycle calculations, with some parameters varying from cycle to cycle, and has restart capabilities. It can accommodate a broad spectrum of reactants, permits changes in physical properties, and offers a wide selection of alternative modeling functions without any reprogramming. It readily adapts to the amount of information available in a particular case because the model is in fact a hierarchy of five models. The models range from a simple model requiring only thermodynamic properties to a complex model demanding full combustion kinetics, transport properties, and poppet valve flow characteristics. Among its many features the model includes heat transfer, valve timing, supercharging, motoring, finite burning rates, cycle-to-cycle variations in air-fuel ratio, humid air, residual and recirculated exhaust gas, and full combustion kinetics.

A Model of Internal Communication in Adaptive Communication Systems.

Science.gov (United States)

Williams, M. Lee

A study identified and categorized different types of internal communication systems and developed an applied model of internal communication in adaptive organizational systems. Twenty-one large organizations were selected for their varied missions and diverse approaches to managing internal communication. Individual face-to-face or telephone…

Work Engagement in South Korea.

Science.gov (United States)

Ho Kim, Won; Park, Jong Gyu; Kwon, Bora

2017-06-01

This study aims to validate Korean versions of the 9-item Utrecht Work Engagement Scale, testing for its factor pattern validity through Exploratory Factor Analysis and Confirmatory Factor Analysis, reliability, and convergent and discriminant validity. The 9-item Utrecht Work Engagement Scale was translated according to the guidelines of the International Test Commission and tested with two Korean samples. First, the Exploratory Factor Analysis found that both two-factor and three-factor solutions were viable options with the first sample. Second, comparison validations of these two solutions were tested by confirming the dimensionality of their structures through the Confirmatory Factor Analyses with the second sample, with the conclusion that the three-factor model solution was the most parsimonious model. Finally, the three-factor model of the 9-item Utrecht Work Engagement Scale was demonstrated to have good discriminant validity and convergent validity, as well as internal consistency of its subscales.

Acculturation, quality of life and work environment of international nurses in a multi-cultural society: A cross-sectional, correlational study.

Science.gov (United States)

Goh, Yong-Shian; Lopez, Violeta

2016-05-01

The aim is to examine the acculturation level of international nurses working in a multi-cultural society. The relationship between acculturation, working environment and quality of life of international nurses was also explored. A cross-sectional, correlational study using self-report questionnaire was conducted on 814 international nurses using stratified random sampling based on the nationality distribution of international nurses registered with the Singapore Nursing Board. Outcome measures included World Health Organisation Quality of Life-BREF (WHOQOL_BREF) and Practice Environment Scale of the Nursing Work Index-Revised (PES-NWI-R). Data were collected from June to December 2012. There were variations in the acculturation level among different nationality groups of international nurses. Acculturation levels were the lowest among Mainland Chinese international nurses (M=27.47, SD 5.23). A positive correlation was found between acculturation and quality of life whereas a lower perception of work environment was associated with lower acculturation level. Data obtained from this study can be utilized to develop interventions targeted at the unique needs of the international nurses as they migrate. Copyright © 2015 Elsevier Inc. All rights reserved.

International Business Models Developed Through Brokerage Knowledge and Value Creation

DEFF Research Database (Denmark)

Petersen, Nicolaj Hannesbo; Rasmussen, Erik Stavnsager

This paper highlights theoretically and empirically international business model decisions in networks with knowledge sharing and value creation. The paper expands the conceptual in-ternational business model framework for technology-oriented companies to include the focal firm’s network role...... and strategic fit in a global embeddedness. The brokerage role in the in-ternationalization of a network is discussed from both a theoretical and empirical point of view. From a business model and social network analysis perspective, this paper will show how firms and network grow internationally through two...

Food intake during the normal activity phase prevents obesity and circadian desynchrony in a rat model of night work.

Science.gov (United States)

Salgado-Delgado, Roberto; Angeles-Castellanos, Manuel; Saderi, Nadia; Buijs, Ruud M; Escobar, Carolina

2010-03-01

Shift work or night work is associated with hypertension, metabolic syndrome, cancer, and other diseases. The cause for these pathologies is proposed to be the dissociation between the temporal signals from the biological clock and the sleep/activity schedule of the night worker. We investigated the mechanisms promoting metabolic desynchrony in a model for night work in rats, based on daily 8-h activity schedules during the resting phase. We demonstrate that the major alterations leading to internal desynchrony induced by this working protocol, flattened glucose and locomotor rhythms and the development of abdominal obesity, were caused by food intake during the rest phase. Shifting food intake to the normal activity phase prevented body weight increase and reverted metabolic and rhythmic disturbances of the shift work animals to control ranges. These observations demonstrate that feeding habits may prevent or induce internal desynchrony and obesity.

Women, work and health between the nineteenth and twentieth centuries from a national and international perspective.

Science.gov (United States)

Salerno, Silvana

2014-11-16

A few years after a series of meetings of Italian scientists were convened prior to the unification of Italy, the first women qualified in medicine and other dedicated women participated in founding a movement for the improvement of living and working conditions of women and children in Italy. analysis of Italian women's contributions in the proceedings of the International Council of Women Congresses and their impact on increasing the number of women's occupational health studies presented at the fourth National Congress on Occupational Diseases held in Rome in 1914. Analysis of the proceedings of the International Council of Women Congresses (Washington, Chicago, London), and of the Women's National Council and other documents so as to obtain a picture of Italian women's working conditions at that time. Women and children worked an excessive number of hours per day, were underpaid, and had a legal status of inferiority. The main work sectors were sewing, embroidery, lace making, ironing, cooking, washing, dressmaking, millinery, fashion design, typing, weaving, artificial flowers, etc. The same sort of work was available to Italian women who emigrated to the United States of America. The success achieved by the women's movement is shown in the paper presented by Irene de Bonis "Occupational diseases among women" and published in the proceedings of the fourth National Congress on Occupational Diseases held in Rome, 9-14 June 1914. The article outlines the main features of the women's movement at the turn of the twentieth century, focussing on their publications describing Italian women's working conditions, considered in an international context. The movement's engagement in the promotion of women's occupational health at international and national level was successful but the First World War was to transform this achievement into the women's peace movement.

Interning and Investing: Rethinking Unpaid Work, Social Capital, and the “Human Capital Regime”

Directory of Open Access Journals (Sweden)

Sophie Hope

2015-09-01

Full Text Available For young workers, interning is a strategy for speculating on one’s asset portfolio. Students and graduates undertake internships as a way of maintaining their self-appreciation and avoiding depreciation in a “human capital regime.” In this article, we explore the specific example of interning in the creative industries as the self-management of human capital vis-à-vis the human capital theses. Taking three cultural objects and recent representations of the issue of unpaid internships—Intern magazine, an advert for a “volunteering opportunity” student placement, and testimonies from interns—we analyze how unpaid work in the creative industries and the neoliberal version of human capital entrepreneurship can be seen as embodied by interns.

Work domain constraints for modelling surgical performance.

Science.gov (United States)

Morineau, Thierry; Riffaud, Laurent; Morandi, Xavier; Villain, Jonathan; Jannin, Pierre

2015-10-01

Three main approaches can be identified for modelling surgical performance: a competency-based approach, a task-based approach, both largely explored in the literature, and a less known work domain-based approach. The work domain-based approach first describes the work domain properties that constrain the agent's actions and shape the performance. This paper presents a work domain-based approach for modelling performance during cervical spine surgery, based on the idea that anatomical structures delineate the surgical performance. This model was evaluated through an analysis of junior and senior surgeons' actions. Twenty-four cervical spine surgeries performed by two junior and two senior surgeons were recorded in real time by an expert surgeon. According to a work domain-based model describing an optimal progression through anatomical structures, the degree of adjustment of each surgical procedure to a statistical polynomial function was assessed. Each surgical procedure showed a significant suitability with the model and regression coefficient values around 0.9. However, the surgeries performed by senior surgeons fitted this model significantly better than those performed by junior surgeons. Analysis of the relative frequencies of actions on anatomical structures showed that some specific anatomical structures discriminate senior from junior performances. The work domain-based modelling approach can provide an overall statistical indicator of surgical performance, but in particular, it can highlight specific points of interest among anatomical structures that the surgeons dwelled on according to their level of expertise.

Reports and recommendations from COSPAR Planetary Exploration Committee (PEX) & International Lunar Exploration Working Group (ILEWG)

Science.gov (United States)

Ehrenfreund, Pascale; Foing, Bernard

2014-05-01

In response to the growing importance of space exploration, the objectives of the COSPAR Panel on Exploration (PEX) are to provide high quality, independent science input to support the development of a global space exploration program while working to safeguard the scientific assets of solar system bodies. PEX engages with COSPAR Commissions and Panels, science foundations, IAA, IAF, UN bodies, and IISL to support in particular national and international space exploration working groups and the new era of planetary exploration. COSPAR's input, as gathered by PEX, is intended to express the consensus view of the international scientific community and should ultimately provide a series of guidelines to support future space exploration activities and cooperative efforts, leading to outstanding scientific discoveries, opportunities for innovation, strategic partnerships, technology progression, and inspiration for people of all ages and cultures worldwide. We shall focus on the lunar exploration aspects, where the COSPAR PEX is building on previous COSPAR, ILEWG and community conferences. An updated COSPAR PEX report is published and available online (Ehrenfreund P. et al, COSPAR planetary exploration panel report, http://www.gwu.edu/~spi/assets/COSPAR_PEX2012.pdf). We celebrate 20 years after the 1st International Conference on Exploration and Utilisation of the Moon at Beatenberg in June 1994. The International Lunar Exploration Working Group (ILEWG) was established the year after in April 1995 at an EGS meeting in Hamburg, Germany. As established in its charter, this working group reports to COSPAR and is charged with developing an international strategy for the exploration of the Moon (http://sci.esa.int/ilewg/ ). It discusses coordination between missions, and a road map for future international lunar exploration and utilisation. It fosters information exchange or potential and real future lunar robotic and human missions, as well as for new scientific and

Establish the Foundation of Environmental Assessment Technique in ROK via the International Environmental Modelling for Radiation Safety Managed by IAEA

Energy Technology Data Exchange (ETDEWEB)

Lee, Han Soo; Choi, Y. H.; Keum, D. K.; Kang, H. S.; Ahn, S. S.; Chung, Y. S.; Lee, C. W.; Hwang, W. T.; Seo, K. S

2005-08-15

Tritiated water (HTO) released from the nuclear facilities can easily be absorbed by plants via their stomata and incorporated into organics by metabolic processes such as photosynthesis. Organically bound tritium (OBT) in plant cells is mostly inexchangeable and remains at harvest to contribute some to the ingestion radiation dose (Barry et al., 1999). In assessing the ingestion dose due to an accidental release of HTO, a dynamic model simulating its environmental behaviors is needed. Various types of dynamic HTO models have been developed in many different countries. Joint international researches have been conducted many times for model comparisons and validations (BIOMOVS II, 1996a, 1996b). In 2003, however, with the understanding of an insufficiency in the validation test, the IAEA started on a joint international research program for the validation of environmental models (EMRAS : Environmental Modelling for Radiation Safety) as a successor to the BIOMASS (2001). The KAERI submitted 'a scenario of an acute soybean exposure to HTO' to the Tritium Working Group (Theme 1) in the EMRAS program. It was accepted as Task 2 of the working group. This report is the result of a joint research for the KAERI scenario carried out by the EMRAS tritium working group with the KAERI playing a role of a coordinator.

Establish the Foundation of Environmental Assessment Technique in ROK via the International Environmental Modelling for Radiation Safety Managed by IAEA

International Nuclear Information System (INIS)

Lee, Han Soo; Choi, Y. H.; Keum, D. K.; Kang, H. S.; Ahn, S. S.; Chung, Y. S.; Lee, C. W.; Hwang, W. T.; Seo, K. S.

2005-08-01

Tritiated water (HTO) released from the nuclear facilities can easily be absorbed by plants via their stomata and incorporated into organics by metabolic processes such as photosynthesis. Organically bound tritium (OBT) in plant cells is mostly inexchangeable and remains at harvest to contribute some to the ingestion radiation dose (Barry et al., 1999). In assessing the ingestion dose due to an accidental release of HTO, a dynamic model simulating its environmental behaviors is needed. Various types of dynamic HTO models have been developed in many different countries. Joint international researches have been conducted many times for model comparisons and validations (BIOMOVS II, 1996a, 1996b). In 2003, however, with the understanding of an insufficiency in the validation test, the IAEA started on a joint international research program for the validation of environmental models (EMRAS : Environmental Modelling for Radiation Safety) as a successor to the BIOMASS (2001). The KAERI submitted 'a scenario of an acute soybean exposure to HTO' to the Tritium Working Group (Theme 1) in the EMRAS program. It was accepted as Task 2 of the working group. This report is the result of a joint research for the KAERI scenario carried out by the EMRAS tritium working group with the KAERI playing a role of a coordinator

International Summit on Integrated Environmental Modeling

Science.gov (United States)

This report describes the International Summit on Integrated Environmental Modeling (IEM), held in Washington, DC 7th-9th December 2010. The meeting brought together 57 scientists and managers from leading US and European government and non-governmental organizations, universitie...

An interference model of visual working memory.

Science.gov (United States)

Oberauer, Klaus; Lin, Hsuan-Yu

2017-01-01

The article introduces an interference model of working memory for information in a continuous similarity space, such as the features of visual objects. The model incorporates the following assumptions: (a) Probability of retrieval is determined by the relative activation of each retrieval candidate at the time of retrieval; (b) activation comes from 3 sources in memory: cue-based retrieval using context cues, context-independent memory for relevant contents, and noise; (c) 1 memory object and its context can be held in the focus of attention, where it is represented with higher precision, and partly shielded against interference. The model was fit to data from 4 continuous-reproduction experiments testing working memory for colors or orientations. The experiments involved variations of set size, kind of context cues, precueing, and retro-cueing of the to-be-tested item. The interference model fit the data better than 2 competing models, the Slot-Averaging model and the Variable-Precision resource model. The interference model also fared well in comparison to several new models incorporating alternative theoretical assumptions. The experiments confirm 3 novel predictions of the interference model: (a) Nontargets intrude in recall to the extent that they are close to the target in context space; (b) similarity between target and nontarget features improves recall, and (c) precueing-but not retro-cueing-the target substantially reduces the set-size effect. The success of the interference model shows that working memory for continuous visual information works according to the same principles as working memory for more discrete (e.g., verbal) contents. Data and model codes are available at https://osf.io/wgqd5/. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

[Structural Equation Modeling of Quality of Work Life in Clinical Nurses based on the Culture-Work-Health Model].

Science.gov (United States)

Kim, Miji; Ryu, Eunjung

2015-12-01

The purpose of this study was to construct and test a structural equation model of quality of work life for clinical nurses based on Peterson and Wilson's Culture-Work-Health model (CWHM). A structured questionnaire was completed by 523 clinical nurses to analyze the relationships between concepts of CWHM-organizational culture, social support, employee health, organizational health, and quality of work life. Among these conceptual variables of CWHM, employee health was measured by perceived health status, and organizational health was measured by presenteeism. SPSS21.0 and AMOS 21.0 programs were used to analyze the efficiency of the hypothesized model and calculate the direct and indirect effects of factors affecting quality of work life among clinical nurses. The goodness-of-fit statistics of the final modified hypothetical model are as follows: χ²=586.03, χ²/df=4.19, GFI=.89, AGFI=.85, CFI=.91, TLI=.90, NFI=.89, and RMSEA=.08. The results revealed that organizational culture, social support, organizational health, and employee health accounted for 69% of clinical nurses' quality of work life. The major findings of this study indicate that it is essential to create a positive organizational culture and provide adequate organizational support to maintain a balance between the health of clinical nurses and the organization. Further repeated and expanded studies are needed to explore the multidimensional aspects of clinical nurses' quality of work life in Korea, including various factors, such as work environment, work stress, and burnout.

ZMOTTO- MODELING THE INTERNAL COMBUSTION ENGINE

Science.gov (United States)

Zeleznik, F. J.

1994-01-01

The ZMOTTO program was developed to model mathematically a spark-ignited internal combustion engine. ZMOTTO is a large, general purpose program whose calculations can be established at five levels of sophistication. These five models range from an ideal cycle requiring only thermodynamic properties, to a very complex representation demanding full combustion kinetics, transport properties, and poppet valve flow characteristics. ZMOTTO is a flexible and computationally economical program based on a system of ordinary differential equations for cylinder-averaged properties. The calculations assume that heat transfer is expressed in terms of a heat transfer coefficient and that the cylinder average of kinetic plus potential energies remains constant. During combustion, the pressures of burned and unburned gases are assumed equal and their heat transfer areas are assumed proportional to their respective mass fractions. Even the simplest ZMOTTO model provides for residual gas effects, spark advance, exhaust gas recirculation, supercharging, and throttling. In the more complex models, 1) finite rate chemistry replaces equilibrium chemistry in descriptions of both the flame and the burned gases, 2) poppet valve formulas represent fluid flow instead of a zero pressure drop flow, and 3) flame propagation is modeled by mass burning equations instead of as an instantaneous process. Input to ZMOTTO is determined by the model chosen. Thermodynamic data is required for all models. Transport properties and chemical kinetics data are required only as the model complexity grows. Other input includes engine geometry, working fluid composition, operating characteristics, and intake/exhaust data. ZMOTTO accommodates a broad spectrum of reactants. The program will calculate many Otto cycle performance parameters for a number of consecutive cycles (a cycle being an interval of 720 crankangle degrees). A typical case will have a number of initial ideal cycles and progress through levels

A ‘frozen volume’ transition model and working mechanism for the shape memory effect in amorphous polymers

Science.gov (United States)

Lu, Haibao; Wang, Xiaodong; Yao, Yongtao; Qing Fu, Yong

2018-06-01

Phenomenological models based on frozen volume parameters could well predict shape recovery behavior of shape memory polymers (SMPs), but the physical meaning of using the frozen volume parameters to describe thermomechanical properties has not been well-established. In this study, the fundamental working mechanisms of the shape memory effect (SME) in amorphous SMPs, whose temperature-dependent viscoelastic behavior follows the Eyring equation, have been established with the considerations of both internal stress and its resulted frozen volume. The stress-strain constitutive relation was initially modeled to quantitatively describe effects of internal stresses at the macromolecular scale based on the transient network theory. A phenomenological ‘frozen volume’ model was then established to characterize the macromolecule structure and SME of amorphous SMPs based on a two-site stress-relaxation model. Effects of the internal stress, frozen volume and strain rate on shape memory behavior and thermomechanical properties of the SMP were investigated. Finally, the simulation results were compared with the experimental results reported in the literature, and good agreements between the theoretical and experimental results were achieved. The novelty and key differences of our newly proposed model with respect to the previous reports are (1). The ‘frozen volume’ in our study is caused by the internal stress and governed by the two-site model theory, thus has a good physical meaning. (2). The model can be applied to characterize and predict both the thermal and thermomechanical behaviors of SMPs based on the constitutive relationship with internal stress parameters. It is expected to provide a power tool to investigate the thermomechanical behavior of the SMPs, of which both the macromolecular structure characteristics and SME could be predicted using this ‘frozen volume’ model.

An International Experience for Social Work Students: Self-Reflection through Poetry and Journal Writing Exercises

Science.gov (United States)

Furman, Rich; Coyne, Ann; Negi, Nalini Junko

2008-01-01

This descriptive article explores the uses of poetry and journaling exercises as means of helping students develop their self-reflective capacities within the context of international social work. First, self-reflection and its importance to social work practice and education is discussed. Second, the importance of self-reflection in international…

Creating Flexible and Sustainable Work Models for Academic Obstetrician-Gynecologists Engaged in Global Health Work.

Science.gov (United States)

Molina, Rose; Boatin, Adeline; Farid, Huma; Luckett, Rebecca; Neo, Dayna; Ricciotti, Hope; Scott, Jennifer

2017-10-01

To describe various work models for obstetrics and gynecology global health faculty affiliated with academic medical centers and to identify barriers and opportunities for pursuing global health work. A mixed-methods study was conducted in 2016 among obstetrics and gynecology faculty and leaders from seven academic medical institutions in Boston, Massachusetts. Global health faculty members were invited to complete an online survey about their work models and to participate in semistructured interviews about barriers and facilitators of these models. Department chairs and residency directors were asked to participate in interviews. The survey response rate among faculty was 65.6% (21/32), of which 76.2% (16/21) completed an interview. Five department leaders (45.5% [5/11]) participated in an interview. Faculty described a range of work models with varied time and compensation, but only one third reported contracted time for global health work. The most common barriers to global health work were financial constraints, time limitations, lack of mentorship, need for specialized training, and maintenance of clinical skills. Career satisfaction, creating value for the obstetrics and gynecology department, and work model flexibility were the most important facilitators of sustainable global health careers. The study identified challenges and opportunities to creating flexible and sustainable work models for academic obstetrics and gynecology clinicians engaged in global health work. Additional research and innovation are needed to identify work models that allow for sustainable careers in global women's health. There are opportunities to create professional standards and models for academic global health work in the obstetrics and gynecology specialty.

A self-organized internal models architecture for coding sensory-motor schemes

Directory of Open Access Journals (Sweden)

Esaú eEscobar Juárez

2016-04-01

Full Text Available Cognitive robotics research draws inspiration from theories and models on cognition, as conceived by neuroscience or cognitive psychology, to investigate biologically plausible computational models in artificial agents. In this field, the theoretical framework of Grounded Cognition provides epistemological and methodological grounds for the computational modeling of cognition. It has been stressed in the literature that textit{simulation}, textit{prediction}, and textit{multi-modal integration} are key aspects of cognition and that computational architectures capable of putting them into play in a biologically plausible way are a necessity.Research in this direction has brought extensive empirical evidencesuggesting that textit{Internal Models} are suitable mechanisms forsensory-motor integration. However, current Internal Models architectures show several drawbacks, mainly due to the lack of a unified substrate allowing for a true sensory-motor integration space, enabling flexible and scalable ways to model cognition under the embodiment hypothesis constraints.We propose the Self-Organized Internal ModelsArchitecture (SOIMA, a computational cognitive architecture coded by means of a network of self-organized maps, implementing coupled internal models that allow modeling multi-modal sensory-motor schemes. Our approach addresses integrally the issues of current implementations of Internal Models.We discuss the design and features of the architecture, and provide empirical results on a humanoid robot that demonstrate the benefits and potentialities of the SOIMA concept for studying cognition in artificial agents.

A Social Work Model of Empathy

Directory of Open Access Journals (Sweden)

Karen E. Gerdes

2009-12-01

Full Text Available This article presents a social work model of empathy that reflects the latest interdisciplinary research findings on empathy. The model reflects the social work commitment to social justice. The three model components are: 1 the affective response to another’s emotions and actions; 2 the cognitive processing of one’s affective response and the other person’s perspective; and 3 the conscious decision-making to take empathic action. Mirrored affective responses are involuntary, while cognitive processing and conscious decision-making are voluntary. The affective component requires healthy, neural pathways to function appropriately and accurately. The cognitive aspects of perspective-taking, self-awareness, and emotion regulation can be practiced and cultivated, particularly through the use of mindfulness techniques. Empathic action requires that we move beyond affective responses and cognitive processing toward utilizing social work values and knowledge to inform our actions. By introducing the proposed model of empathy, we hope it will serve as a catalyst for discussion and future research and development of the model. Key Words: Empathy, Social Empathy, Social Cognitive Neuroscience

Overview of the EMRAS biota dosimetry working group

International Nuclear Information System (INIS)

Kawaguchi, Isao; Doi, Masahiro

2008-01-01

Current principle of radiation protection systems is protection of human, because the human is assumed as the most sensitive organism. Protection framework of human is also believed to be effective for protection of non-human species. On the other hand, it is recently attracting the international interests how sustainability of the ecological services is influenced by environmental disturbances such as chemicals and radiation. Therefore, international concern about protection framework of nonhuman biota has arisen. By the international concern, European and American countries were respectively developed models to evaluate effects of radiation to biota. However, the models are based on their own assumptions, so that the international validity has not been confirmed. Therefore, in IAEA, biota dosimetry working group (BWG) was established in Environmental Modeling for Radiation Safety (EMRAS) program, which aimed to intercompare the models to validate their assumptions and estimations. This paper reports summary of the activity in EMRAS biota dosimetry working group. (author)

International Geomagnetic Reference Field: the 12th generation

OpenAIRE

Thébault , Erwan; Finlay , Christopher ,; Beggan , Ciarán ,; Alken , Patrick; Aubert , Julien ,; Barrois , Olivier; Bertrand , François; Bondar , Tatiana; Boness , Axel; Brocco , Laura; Canet , Elisabeth ,; Chambodut , Aude; Chulliat , Arnaud ,; Coïsson , Pierdavide ,; Civet , François

2015-01-01

International audience; The 12th generation of the International Geomagnetic Reference Field (IGRF) was adopted in December 2014 by the Working Group V-MOD appointed by the International Association of Geomagnetism and Aeronomy (IAGA). It updates the previous IGRF generation with a definitive main field model for epoch 2010.0, a main field model for epoch 2015.0, and a linear annual predictive secular variation model for 2015.0-2020.0. Here, we present the equations defining the IGRF model, p...

In a rat model of night work, activity during the normal resting phase produces desynchrony in the hypothalamus.

Science.gov (United States)

Salgado-Delgado, Roberto; Nadia, Saderi; Angeles-Castellanos, M; Buijs, Ruud M; Escobar, Carolina

2010-12-01

Internal synchrony among external cycles and internal oscillators allows adaptation of physiology to cyclic demands for homeostasis. Night work and shift work lead to a disrupted phase relationship between external time cues and internal rhythms, also losing internal coherence among oscillations. This process results in internal desynchrony (ID) in which behavioral, hormonal, and metabolic variables cycle out of phase. It is still not clear whether ID originates at a peripheral or at a central level. In order to determine the possible role of hypothalamic oscillators in ID, we explored with a rat model of "night work" daily rhythms of activity and clock gene expression in the hypothalamus. This study provides evidence that wakefulness and activity during the normal resting phase lead to a shift in the diurnal rhythms of c-Fos and induce a rhythm of PER1 in the arcuate and dorsomedial nucleus of the hypothalamus, both associated with metabolism and regulation of the sleep/wake cycle. Moreover, the number of orexin (ORX)-positive neurons and c-Fos in the perifornical area increased during the working period, suggesting a relevant switch of activity in this brain region induced by the scheduled activity; however, the colocalization of c-Fos in ORX-positive cells was not increased. In contrast, the suprachiasmatic nucleus and the paraventricular nucleus remained locked to the light/dark cycle, resulting in ID in the hypothalamus. Present data suggest that ID occurs already at the level of the first output projections from the SCN, relaying nuclei that transmit temporal signals to other brain areas and to the periphery.

SAM International Case Studies: DPV Analysis in Mexico

Energy Technology Data Exchange (ETDEWEB)

McCall, James D [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-03-28

Presentation demonstrates the use of the System Advisor Model (SAM) in international analyses, specifically Mexico. Two analyses are discussed with relation to SAM modelling efforts: 1) Customer impacts from changes to net metering and billing agreements and 2) Potential benefits of PV for Mexican solar customers, the Mexican Treasury, and the environment. Along with the SAM analyses, integration of the International Utility Rate Database (I-URDB) with SAM and future international SAM work are discussed. Presentation was created for the International Solar Energy Society's (ISES) webinar titled 'International use of the NREL System Advisor Model (SAM) with case studies'.

How Do the Approaches to Accountability Compare for Charities Working in International Development?

Science.gov (United States)

Kirsch, David

2014-01-01

Approaches to accountability vary between charities working to reduce under-five mortality in underdeveloped countries, and healthcare workers and facilities in Canada. Comparison reveals key differences, similarities and trade-offs. For example, while health professionals are governed by legislation and healthcare facilities have a de facto obligation to be accredited, charities and other international organizations are not subject to mandatory international laws or guidelines or to de facto international standards. Charities have policy goals similar to those found in the Canadian substudies, including access, quality, cost control, cost-effectiveness and customer satisfaction. However, the relative absence of external policy tools means that these goals may not be realized. Accountability can be beneficial, but too much or the wrong kind of accountability can divert resources and diminish returns. PMID:25305397

A general model for use in internal dosimetry

International Nuclear Information System (INIS)

Johnson, J.R.; Carver, M.B.

1981-01-01

A model is described that combines the International Commission on Radiological Protection's Task Group on Lung Dynamics' Model, Eve's model for transport of material through the gastro-intestinal tract and a compartment model for the organs. Differential equations for this model are given, which include urinary and fecal excretion rates, and the method used to obtain solutions to these equations is described. (author)

Self-Determination and Meaningful Work: Exploring Socioeconomic Constraints

OpenAIRE

Allan, Blake A.; Autin, Kelsey L.; Duffy, Ryan D.

2016-01-01

This study examined a model of meaningful work among a diverse sample of working adults. From the perspectives of Self-Determination Theory and the Psychology of Working Framework, we tested a structural model with social class and work volition predicting SDT motivation variables, which in turn predicted meaningful work. Partially supporting hypotheses, work volition was positively related to internal regulation and negatively related to amotivation, whereas social class was positively relat...

Quantitative Risk Modeling of Fire on the International Space Station

Science.gov (United States)

Castillo, Theresa; Haught, Megan

2014-01-01

The International Space Station (ISS) Program has worked to prevent fire events and to mitigate their impacts should they occur. Hardware is designed to reduce sources of ignition, oxygen systems are designed to control leaking, flammable materials are prevented from flying to ISS whenever possible, the crew is trained in fire response, and fire response equipment improvements are sought out and funded. Fire prevention and mitigation are a top ISS Program priority - however, programmatic resources are limited; thus, risk trades are made to ensure an adequate level of safety is maintained onboard the ISS. In support of these risk trades, the ISS Probabilistic Risk Assessment (PRA) team has modeled the likelihood of fire occurring in the ISS pressurized cabin, a phenomenological event that has never before been probabilistically modeled in a microgravity environment. This paper will discuss the genesis of the ISS PRA fire model, its enhancement in collaboration with fire experts, and the results which have informed ISS programmatic decisions and will continue to be used throughout the life of the program.

PREFACE: 1st International Conference on Rheology and Modeling of Materials

Science.gov (United States)

Gömze, László A.

2015-04-01

Understanding the rheological properties of materials and their rheological behaviors during their manufacturing processes and in their applications in many cases can help to increase the efficiency and competitiveness not only of the finished goods and products but the organizations and societies also. The more scientific supported and prepared organizations develop more competitive products with better thermal, mechanical, physical, chemical and biological properties and the leading companies apply more competitive knowledge, materials, equipment and technology processes. The idea to organize in Hungary the 1st International Conference on Rheology and Modeling of Materials we have received from prospective scientists, physicists, chemists, mathematicians and engineers from Asia, Europe, North and South America including India, Korea, Russia, Turkey, Estonia, France, Italy, United Kingdom, Chile, Mexico and USA. The goals of ic-rmm1 the 1st International Conference on Rheology and Modeling of Materials are the following: • Promote new methods and results of scientific research in the fields of modeling and measurements of rheological properties and behavior of materials under processing and applications. • Change information between the theoretical and applied sciences as well as technical and technological implantations. • Promote the communication between the scientists of different disciplines, nations, countries and continents. The international conference ic-rmm1 provides a platform among the leading international scientists, researchers, PhD students and engineers for discussing recent achievements in measurement, modeling and application of rheology in materials technology and materials science of liquids, melts, solids, crystals and amorphous structures. Among the major fields of interest are the influences of material structures, mechanical stresses temperature and deformation speeds on rheological and physical properties, phase transformation of

Work Values of Lithuanian University Students: Internal Structure

Directory of Open Access Journals (Sweden)

Vincentas Lamanauskas

2017-04-01

Full Text Available Individual’s work values define his/her career purposefulness. Individual’s chosen work values allow foreseeing what activity context and career model is important for him/her, seeking to successfully realize oneself in professional activity. Planning his/her professional career an individual is searching for the activity sphere, which could conform not only to his/her personal features, but also to his/her value orientations. Work values important for the individual allow realizing if they form conditions for planning modern career (successfully solve constantly changing activity problems and to correspond to always new raised requirements for a person in the organisation or in labour market, the realisation of which in today’s constantly changing labour market and social context becomes more and more problematic. Empiric research was carried out seeking to discover the work (activity value structure. The research instrument was created by the authors of the research. Two hundred sixty five first-year students from three Lithuanian universities participated in the research. These are the main higher education institutions, preparing teachers in Lithuania. The obtained results show that work value structure of the first year students studying in social and humanitarian science programmes can be expressed by 6 main factors: responsible activity values, active work values, harmony values, reward values, activity style values, and social status values. Also, the main differences were ascertained between female and male work value structure. Responsible activity values, active work values and harmony values were much more important for female than male students.

Modelling of internal structure in seismic analysis of a PHWR building

International Nuclear Information System (INIS)

Reddy, G.R.; Vaze, K.K.; Kushawaha, H.S.; Ingle, R.K.; Subramanian, K.V.

1991-01-01

Seismic analysis of complex and large structures, consisting of thick shear walls, such as Reactor Building is very involved and time consuming. It is a standard practice to model the structure as a stick model to predict reasonably the dynamic behaviour of the structure. It is required to determine approximate equivalent sectional properties of Internal Structure for representation in the stick model. The restraint to warping can change the stress distribution thus affecting the centre of rigidity and torsional inertia, Hence, standard formulae does not hold good for determination of sectional properties of the Internal Structure. In this case the equivalent sectional properties for the Internal Structure are calculated using a Finite Element Model (FEM) of the Internal Structure and applying unit horizontal forces in each direction. A 3-D stick model is developed using the guidelines. Using the properties calculated by FEM and also by standard formulae, the responses of the 3-D stick model are compared. (J.P.N.)

The effects of internal refractive index variation in near-infrared optical tomography: a finite element modelling approach

International Nuclear Information System (INIS)

Dehghani, Hamid; Brooksby, Ben; Vishwanath, Karthik; Pogue, Brian W; Paulsen, Keith D

2003-01-01

Near-infrared (NIR) tomography is a technique used to measure light propagation through tissue and generate images of internal optical property distributions from boundary measurements. Most popular applications have concentrated on female breast imaging, neonatal and adult head imaging, as well as muscle and small animal studies. In most instances a highly scattering medium with a homogeneous refractive index is assumed throughout the imaging domain. Using these assumptions, it is possible to simplify the model to the diffusion approximation. However, biological tissue contains regions of varying optical absorption and scatter, as well as varying refractive index. In this work, we introduce an internal boundary constraint in the finite element method approach to modelling light propagation through tissue that accounts for regions of different refractive indices. We have compared the results to data from a Monte Carlo simulation and show that for a simple two-layered slab model of varying refractive index, the phase of the measured reflectance data is significantly altered by the variation in internal refractive index, whereas the amplitude data are affected only slightly

Action Prediction Allows Hypothesis Testing via Internal Forward Models at 6 Months of Age

Directory of Open Access Journals (Sweden)

Gustaf Gredebäck

2018-03-01

Full Text Available We propose that action prediction provides a cornerstone in a learning process known as internal forward models. According to this suggestion infants’ predictions (looking to the mouth of someone moving a spoon upward will moments later be validated or proven false (spoon was in fact directed toward a bowl, information that is directly perceived as the distance between the predicted and actual goal. Using an individual difference approach we demonstrate that action prediction correlates with the tendency to react with surprise when social interactions are not acted out as expected (action evaluation. This association is demonstrated across tasks and in a large sample (n = 118 at 6 months of age. These results provide the first indication that infants might rely on internal forward models to structure their social world. Additional analysis, consistent with prior work and assumptions from embodied cognition, demonstrates that the latency of infants’ action predictions correlate with the infant’s own manual proficiency.

Working Memory as Internal Attention: Toward an Integrative Account of Internal and External Selection Processes

Science.gov (United States)

Kiyonaga, Anastasia; Egner, Tobias

2012-01-01

Working memory (WM) and attention have been studied as separate cognitive constructs, although it has long been acknowledged that attention plays an important role in controlling the activation, maintenance, and manipulation of representations in WM. WM has, conversely, been thought of as a means of maintaining representations to voluntarily guide perceptual selective attention. It has more recently been observed, however, that the contents of WM can capture visual attention, even when such internally maintained representations are irrelevant, and often disruptive, to the immediate external task. Thus the precise relationship between WM and attention remains unclear, but it appears that they may bi-directionally impact one another, whether or not internal representations are consistent with external perceptual goals. This reciprocal relationship seems, further, to be constrained by limited cognitive resources to handle demands in either maintenance or selection. We propose here that the close relationship between WM and attention may be best described as a give-and-take interdependence between attention directed toward actively maintained internal representations (traditionally considered WM) versus external perceptual stimuli (traditionally considered selective attention), underpinned by their shared reliance on a common cognitive resource. Put simply, we argue that WM and attention should no longer be considered as separate systems or concepts, but as competing and impacting one another because they rely on the same limited resource. This framework can offer an explanation for the capture of visual attention by irrelevant WM contents, as well as a straightforward account of the underspecified relationship between WM and attention. PMID:23233157

Working memory as internal attention: toward an integrative account of internal and external selection processes.

Science.gov (United States)

Kiyonaga, Anastasia; Egner, Tobias

2013-04-01

Working memory (WM) and attention have been studied as separate cognitive constructs, although it has long been acknowledged that attention plays an important role in controlling the activation, maintenance, and manipulation of representations in WM. WM has, conversely, been thought of as a means of maintaining representations to voluntarily guide perceptual selective attention. It has more recently been observed, however, that the contents of WM can capture visual attention, even when such internally maintained representations are irrelevant, and often disruptive, to the immediate external task. Thus, the precise relationship between WM and attention remains unclear, but it appears that they may bidirectionally impact one another, whether or not internal representations are consistent with the external perceptual goals. This reciprocal relationship seems, further, to be constrained by limited cognitive resources to handle demands in either maintenance or selection. We propose here that the close relationship between WM and attention may be best described as a give-and-take interdependence between attention directed toward either actively maintained internal representations (traditionally considered WM) or external perceptual stimuli (traditionally considered selective attention), underpinned by their shared reliance on a common cognitive resource. Put simply, we argue that WM and attention should no longer be considered as separate systems or concepts, but as competing and influencing one another because they rely on the same limited resource. This framework can offer an explanation for the capture of visual attention by irrelevant WM contents, as well as a straightforward account of the underspecified relationship between WM and attention.

Creating a Pan-Asian model for international cooperation in nuclear power

International Nuclear Information System (INIS)

Gerstenhaber, E.P.

1994-01-01

The author stressed that as southeast Asian countries expand their participation in nuclear technology, a time has come for new forms of cooperation between nations. Cooperation will accelerate the entry of nations into the nuclear era, especially where a well developed industrial and technical base may not yet be available. By sharing the challenges of the technology and working together, nations may more quickly and economically afford the benefits of nuclear energy. Activities range from basic engineering to manufacturing and assembly of advanced modularized plants. Focus on nuclear requirements will help to build an indigenous industrial and technical base. Several models for international cooperation are presented

STABILITY OF INTERNATIONAL ENVIRONMENTAL AGREEMENTS IN LEADERSHIP MODEL

Institute of Scientific and Technical Information of China (English)

Jin ZHANG; Shouyang WANG; Lei ZU

2008-01-01

International Environmental Agreements (IEAs) are a form of cooperation ratified by countries which can improve the management of shared environmental resources. The authors analyze the stability of International Environmental Agreements in leadership model. In 2006, Diamantoudi & Sartzetakis found that a stable coalition consists of either 2, 3, or 4 members if the number of countries is greater than 4. Their model is reconsidered. It is shown that the size of stable IEAs decreases from 3 to 2 when the total number of countries involved increases. However, a situation that can guarantee 4 to be the size of stable IEAs could not be found.

Robots with Internal Models: A Route to Self-Aware and Hence Safer Robots

Science.gov (United States)

Winfield, Alan F. T.

The following sections are included: * Introduction * Internal Models and Self-Awareness * Internal Model-Based Architecture for Robot Safety * The Internal Model * The Consequence Evaluator * The Object Tracker-Localizer * Towards an Ethical Robot * Challenges and Open Questions * Discussion: The Way Forward * Summary and Conclusions

Mathematical models in Slowpoke reactor internal irradiation site

International Nuclear Information System (INIS)

Raza, J.

2007-01-01

The main objective is to build representative mathematical models of neutron activation analysis in a Slowpoke internal irradiation site. Another significant objective is to correct various elements neutron activation analysis measured mass using these models. The neutron flux perturbation is responsible for the measured under-estimation of real masses. We supposed that neutron flux perturbation measurements taken during the Ecole Polytechnique de Montreal Slowpoke reactor first fuel loading were still valid after the second fuelling. .We also supposed that the thermal neutrons spatial and kinetic energies distributions as well as the absorption microscopic cross section dependence on the neutrons kinetic energies were important factors to satisfactorily represent neutron activation analysis results. In addition, we assumed that the neutron flux is isotropic in the laboratory system. We used experimental results from the Slowpoke reactor internal irradiation sites, in order to validate our mathematical models. Our models results are in close agreement with these experimental results..We established an accurate global mathematical correlation of the neutron flux perturbation in function of samples volumes and macroscopic neutron absorption cross sections. It is applicable to sample volumes ranging from 0,1 to 1,3 ml and macroscopic neutron absorption cross section up to 5 moles-b for seven (7) elements with atomic numbers (Z) ranging from 5 to 79. We first came up with a heuristic neutron transport mathematical semi-analytical model, in order to better understand neutrons behaviour in presence of one of several different nuclei samples volumes and mass. In order to well represent the neutron flux perturbation, we combined a neutron transport solution obtained from the spherical harmonics method of a finite cylinder and a mathematical expression combining two cylindrical harmonic functions..With the help of this model and the least squares method, we made extensive

International Working Group on Water Reactor Fuel Performance and Technology. Summary report of the 14. plenary meeting. Working material

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

The fourteenth Plenary Meeting of the International Working Group on Water Reactor Fuel Performance and Technology (IWGFPT) was held at IAEA Headquarters, Vienna, from 21 to 23 May 1997. Twenty-seven participants, from twenty two Member States and two international organizations, attended the meeting. These presentations generally gave: The general situation of the nuclear industry in the country; Fuel fabrication; Fuel performance, high burnup fuel (including MOX) operational experience; Status and trends in fuel research programmes directed to achievement sufficient safety margins at high burnups with regard to normal and transient operational conditions. Majority of countries reported on the stable situation of the nuclear fuel industry, i.e. without significant additions/cuts in nuclear power plant and fuel fabrication plant (NPP) capacities. Refs, figs, tabs.

International Working Group on Water Reactor Fuel Performance and Technology. Summary report of the 14. plenary meeting. Working material

International Nuclear Information System (INIS)

1997-01-01

The fourteenth Plenary Meeting of the International Working Group on Water Reactor Fuel Performance and Technology (IWGFPT) was held at IAEA Headquarters, Vienna, from 21 to 23 May 1997. Twenty-seven participants, from twenty two Member States and two international organizations, attended the meeting. These presentations generally gave: The general situation of the nuclear industry in the country; Fuel fabrication; Fuel performance, high burnup fuel (including MOX) operational experience; Status and trends in fuel research programmes directed to achievement sufficient safety margins at high burnups with regard to normal and transient operational conditions. Majority of countries reported on the stable situation of the nuclear fuel industry, i.e. without significant additions/cuts in nuclear power plant and fuel fabrication plant (NPP) capacities. Refs, figs, tabs

Model tracking dual stochastic controller design under irregular internal noises

International Nuclear Information System (INIS)

Lee, Jong Bok; Heo, Hoon; Cho, Yun Hyun; Ji, Tae Young

2006-01-01

Although many methods about the control of irregular external noise have been introduced and implemented, it is still necessary to design a controller that will be more effective and efficient methods to exclude for various noises. Accumulation of errors due to model tracking, internal noises (thermal noise, shot noise and l/f noise) that come from elements such as resistor, diode and transistor etc. in the circuit system and numerical errors due to digital process often destabilize the system and reduce the system performance. New stochastic controller is adopted to remove those noises using conventional controller simultaneously. Design method of a model tracking dual controller is proposed to improve the stability of system while removing external and internal noises. In the study, design process of the model tracking dual stochastic controller is introduced that improves system performance and guarantees robustness under irregular internal noises which can be created internally. The model tracking dual stochastic controller utilizing F-P-K stochastic control technique developed earlier is implemented to reveal its performance via simulation

Cochrane Rehabilitation Methodology Committee: an international survey of priorities for future work.

Science.gov (United States)

Levack, William M; Meyer, Thorsten; Negrini, Stefano; Malmivaara, Antti

2017-10-01

Cochrane Rehabilitation aims to improve the application of evidence-based practice in rehabilitation. It also aims to support Cochrane in the production of reliable, clinically meaningful syntheses of evidence related to the practice of rehabilitation, while accommodating the many methodological challenges facing the field. To this end, Cochrane Rehabilitation established a Methodology Committee to examine, explore and find solutions for the methodological challenges related to evidence synthesis and knowledge translation in rehabilitation. We conducted an international online survey via Cochrane Rehabilitation networks to canvass opinions regarding the future work priorities for this committee and to seek information on people's current capabilities to assist with this work. The survey findings indicated strongest interest in work on how reviewers have interpreted and applied Cochrane methods in reviews on rehabilitation topics in the past, and on gathering a collection of existing publications on review methods for undertaking systematic reviews relevant to rehabilitation. Many people are already interested in contributing to the work of the Methodology Committee and there is a large amount of expertise for this work in the extended Cochrane Rehabilitation network already.

BEYOND THE WORK-LIFE BALANCE: FAMILY AND INTERNATIONAL MOBILITY OF THE HIGHLY SKILLED

Directory of Open Access Journals (Sweden)

Núria Vergés Bosch

2013-10-01

Full Text Available International mobility of the highly skilled has become one of the cornerstones of development in the current knowledge society. Correspondingly, highly skilled personnel are impelled to move abroad in order to improve their competences and build influential professional networks. Mobility implies some advantages involving personal, social and family opportunities when movers experience handicaps in their country of origin. For movers, mobility becomes a new challenge beyond the work-family balance, particularly for women who usually take on the lion’s share of childcare and domestic tasks within the family. The literature exploring the gender dimension in relation to international mobility points to complex outcomes. Firstly, women are taking on a more active role in international mobility processes, even when they have family. Secondly, family and international mobility are interrelated both for men and for women, although family could become a hindrance, particularly for women. Thirdly, international mobility and women’s career development may interfere with family formation or modify traditional family values. Finally, families moving abroad constitute a challenge for public policy, since they present a new area of problems. We aim to analyse the relationship between international mobility and family based on in-depth interviews from a purposive sample of highly skilled personnel in science and technology. The results of our research suggest that international mobility of the highly skilled has effects on the family and vice versa; however, while international mobility and family are compatible, measures and policies to reconcile them are still insufficient.

Making short-term international medical volunteer placements work: a qualitative study.

Science.gov (United States)

Elnawawy, Omnia; Lee, Andrew C K; Pohl, Gerda

2014-06-01

International medical volunteering has grown in recent decades. It has the potential to benefit and harm the volunteer and host countries; but there is a paucity of literature on the impacts of international medical volunteering and a need to find ways to optimise the benefits of such placements. In this study, one example of international medical volunteering was examined involving British GPs on short-term placements in Nepal. The intention was to explore the expectations and experiences of the local health workers, volunteers, and host organisation to try and understand what makes volunteer placements work. Qualitative study of key informant interviews. Stakeholders of a short-term international medical volunteer (IMV) placement programme in Nepal. Key informant interviews were carried out via face-to-face or telephone/internet interviews with five previous volunteers, three representatives from a non-governmental organisation providing placements, and five local health workers in Nepal who had had contact with the IMVs. Interviews were recorded, transcribed, and analysed using standard thematic framework approaches. All the stakeholders had their own specific motives for participating in the IMV programme. The relationship between volunteers and the Nepalese health workers was complex and characterised by discrepant and occasionally unrealistic expectations. Managing these different expectations was challenging. Contextual issues and cultural differences are important considerations in medical volunteer programmes, and this study highlights the importance of robust preparation pre-placement for the volunteer and host to ensure positive outcomes. © British Journal of General Practice 2014.

International Charitable Connections: the Growth in Number, and the Countries of Operation, of English and Welsh Charities Working Overseas.

Science.gov (United States)

Clifford, David

2016-07-01

This paper provides new empirical evidence about English and Welsh charities operating internationally. It answers basic questions unaddressed in existing work: how many charities work overseas, and how has this number changed over time? In which countries do they operate, and what underlies these geographical patterns? It makes use of a unique administrative dataset which records every country in which each charity operates. The results show a sizeable increase in the number of charities working overseas since the mid-1990s. They show that charities are much more likely to work in countries with colonial and linguistic ties to the UK, and less likely to work in countries with high levels of instability or corruption. This considerable geographical unevenness, even after controlling for countries' population size and poverty, illustrates the importance of supply-side theories and of institutional factors to an understanding of international voluntary activity. The paper also serves to provide a new perspective on international charitable operation: while it is the large development charities that are household names, the results reveal the extent of small-scale 'grassroots' registered charitable activity that links people and places internationally, and the extent of activity in 'developed' as well as 'developing' country contexts.

20th International Symposium on Shiftwork and Working Time: Biological Mechanisms, Recovery, and Risk Management in the 24-h Society

NARCIS (Netherlands)

Kecklund, L.G.; Milia, L. Di; Axelsson, J.; Lowden, A.; Äkerstedt, T.

2012-01-01

This dedicated issue of Chronobiology International is devoted to the selected proceedings of the 20th International Symposium on Shift Work and Working Time held in Stockholm, Sweden, 28 June to 1 July 2011. It constitutes the fifth such issue of the journal since 2004 dedicated to the selected

A Comparative Test of Work-Family Conflict Models and Critical Examination of Work-Family Linkages

Science.gov (United States)

Michel, Jesse S.; Mitchelson, Jacqueline K.; Kotrba, Lindsey M.; LeBreton, James M.; Baltes, Boris B.

2009-01-01

This paper is a comprehensive meta-analysis of over 20 years of work-family conflict research. A series of path analyses were conducted to compare and contrast existing work-family conflict models, as well as a new model we developed which integrates and synthesizes current work-family theory and research. This new model accounted for 40% of the…

Working Together Internationally

Science.gov (United States)

Freedman, Terry

2009-01-01

To a large extent, schools encourage collaboration all the time, especially in countries such as the United States, Britain, and Australia. Much of what goes on in schools is fairly short-term. There are, however, an increasing number of teachers who are seeing the potential value in longer-term projects in which students have to work together.…

Maintenance overtime policies in reliability theory models with random working cycles

CERN Document Server

Nakagawa, Toshio

2015-01-01

This book introduces a new concept of replacement in maintenance and reliability theory. Replacement overtime, where replacement occurs at the first completion of a working cycle over a planned time, is a new research topic in maintenance theory and also serves to provide a fresh optimization technique in reliability engineering. In comparing replacement overtime with standard and random replacement techniques theoretically and numerically, 'Maintenance Overtime Policies in Reliability Theory' highlights the key benefits to be gained by adopting this new approach and shows how they can be applied to inspection policies, parallel systems and cumulative damage models. Utilizing the latest research in replacement overtime by internationally recognized experts, readers are introduced to new topics and methods, and learn how to practically apply this knowledge to actual reliability models. This book will serve as an essential guide to a new subject of study for graduate students and researchers and also provides a...

Using structural equation modelling to integrate human resources with internal practices for lean manufacturing implementation

Directory of Open Access Journals (Sweden)

Protik Basu

2018-01-01

Full Text Available The purpose of this paper is to explore and integrate the role of human resources with the internal practices of the Indian manufacturing industries towards successful implementation of lean manu-facturing (LM. An extensive literature survey is carried out. An attempt is made to build an ex-haustive list of all the input manifests related to human resources and internal practices necessary for LM implementation, coupled with a similar exhaustive list of the benefits accrued from its suc-cessful implementation. A structural model is thus conceptualized, which is empirically validated based on the data from the Indian manufacturing sector. Hardly any survey based empirical study in India has been found to integrate human resources with the internal processes towards success-ful LM implementation. This empirical research is thus carried out in the Indian manufacturing in-dustries. The analysis reveals six key input constructs and three output constructs, indicating that these constructs should act in unison to maximize the benefits of implementing lean. The structural model presented in this paper may be treated as a guide to integrate human resources with internal practices to successfully implement lean, leading to an optimum utilization of resources. This work is one of the very first researches to have a survey-based empirical analysis of the role of human resources and internal practices of the Indian manufacturing sector towards an effective lean im-plementation.

Internal sources of risk in building employees’ attitudes of safe work in metallurgical enterprise

Directory of Open Access Journals (Sweden)

K. Grzybowska

2013-04-01

Full Text Available The aim of the article is the identification of the internal sources of risk in the process of improving the system of safety and work hygiene management. After conduction of the analysis the conclusion is that the significant source of risk in the process of improvement of safety and work hygiene management is the human factor and, in particular, the lack of employees’ awareness concerning the importance of their attitudes in the improvement of the system.

Smoking addiction among young women working at night at International call centres in India

OpenAIRE

Amrita Gupta

2018-01-01

Background Indian women are actively involved in occupations which were regarded as a taboo such as night work. Working at night for international call centres is a significant step in moving ahead of patriarchal control over women´s mobility in India. The job brings about lifestyle changes among employees such as late night partying, smoking, and boozing. The women employees are mainly fresh graduates. The study brings about the prevalence and smoking behaviour among th...

Evaluation of the risk of internal contamination of persons working in isotope laboratories

Energy Technology Data Exchange (ETDEWEB)

Adamiak-Ziemba, J.; Doniec, J.; Kocznow, W.; Hawrynski, M.

1985-01-01

The investigation covered 484 workers. Altogether 1787 determinations have been made, in this--1648 internal contaminations and 139 contaminations of air, hand skin and working surfaces. The internal contaminations (22% of results) resulted mainly from deviation from radiological protection rules and were reduced through certain changes. Those were tritium contaminations (application of tritium radioluminiscence dyes) and 125--and 131-iodine radioisotopes (in nuclear medicine laboratories) the highest levels of which were 20 mSv and 0.25% ALI respectively. The results of /sup 238/Pu air contamination measurements have indicates that the dust arising during the production of smoke detectors (with /sup 238/PuO/sub 2/ sources) probably has no respirable fraction properties, which confines its absorption in lower segments of the respiratory tract. It has been demonstrated that in Poland there is no need of constructing a permanent central system of internal contamination control.

On the Internal Model Principle in the Coordination of Nonlinear Systems

NARCIS (Netherlands)

De Persis, C.; Jayawardhana, B.

2014-01-01

The role of the internal model principle is investigated in this paper for the coordination of relative-degree-one and relative-degree-two nonlinear systems. For relative-degree-one systems that are incrementally (output-feedback) passive, we propose internal-model-based distributed control laws

Econometric modelling of international carbon tax regimes

International Nuclear Information System (INIS)

Smith, Clare; Hall, Stephen; Mabey, N.

1995-01-01

An economometric model of fossil fuel demand has been estimated for eight OECD countries, relating coal, oil and gas demands to GDP and prices. In addition a model of endogenous technical progress has been estimated, aiming to include both price induced innovation in energy and structural change in the economy as long-term determinants of energy consumption. A number of possible international carbon/energy tax agreements are simulated, showing the impacts on carbon dioxide emissions and comparing the two models. (author)

The relationships between internal and external training load models during basketball training.

Science.gov (United States)

Scanlan, Aaron T; Wen, Neal; Tucker, Patrick S; Dalbo, Vincent J

2014-09-01

The present investigation described and compared the internal and external training loads during basketball training. Eight semiprofessional male basketball players (mean ± SD, age: 26.3 ± 6.7 years; stature: 188.1 ± 6.2 cm; body mass: 92.0 ± 13.8 kg) were monitored across a 7-week period during the preparatory phase of the annual training plan. A total of 44 total sessions were monitored. Player session ratings of perceived exertion (sRPE), heart rate, and accelerometer data were collected across each training session. Internal training load was determined using the sRPE, training impulse (TRIMP), and summated-heart-rate-zones (SHRZ) training load models. External training load was calculated using an established accelerometer algorithm. Pearson product-moment correlations with 95% confidence intervals (CIs) were used to determine the relationships between internal and external training load models. Significant moderate relationships were observed between external training load and the sRPE (r42 = 0.49, 95% CI = 0.23-0.69, p external training load and the SHRZ model (r42 = 0.61, 95% CI = 0.38-0.77, p internal and external training load models, the magnitude of the correlations and low commonality suggest that internal training load models measure different constructs of the training process than the accelerometer training load model in basketball settings. Basketball coaching and conditioning professionals should not assume a linear dose-response between accelerometer and internal training load models during training and are recommended to combine internal and external approaches when monitoring training load in players.

Improvement of resident perceptions of nurse practitioners after the introduction of a collaborative care model: a benefit of work hour reform?

Science.gov (United States)

Bellini, Lisa M; Shea, Judy A

2006-01-01

Nurse practitioners (NPs) are assuming larger roles in many residency programs as a result of work hour reform, which is creating the potential for collaboration with interns and residents. To assess housestaff perceptions of NPs. We used a 17-item survey before and after the implementation of a collaborative care model in a university-based medicine residency. The majority of residents held favorable attitudes about NPs before the introduction of the collaborative care model. After 1 year, more interns and residents appreciated NPs' clinical judgment (effect size [ES] = .26, p =.02), thought they should be able to order laboratory tests (ES = .23, p = .05) and perform basic procedures (ES = .67, p collaborative care can be an unintended consequence of work hour reform. Educators are encouraged to think about how changes in the curriculum structure can provide opportunities for positive collaborative care experiences.

Urn model for products’ shares in international trade

Science.gov (United States)

Barbier, Matthieu; Lee, D.-S.

2017-12-01

International trade fluxes evolve as countries revise their portfolios of trade products towards economic development. Accordingly products’ shares in international trade vary with time, reflecting the transfer of capital between distinct industrial sectors. Here we analyze the share of hundreds of product categories in world trade for four decades and find a scaling law obeyed by the annual variation of product share, which informs us of how capital flows and interacts over the product space. A model of stochastic transfer of capital between products based on the observed scaling relation is proposed and shown to reproduce exactly the empirical share distribution. The model allows analytic solutions as well as numerical simulations, which predict a pseudo-condensation of capital onto few product categories and when it will occur. At the individual level, our model finds certain products unpredictable, the excess or deficient growth of which with respect to the model prediction is shown to be correlated with the nature of goods.

Ensure the Right of Citizens to Work: Problems of Domestic and International Regulation

Science.gov (United States)

Berdiyarova, Zhamilya; Serikbekova, Samal; Babajanyan, Yester

2016-01-01

The purpose of this research is to examine the legal problems of ensuring the right to work of citizens in the Republic of Kazakhstan and to find the conformity of labor laws in the Republic of Kazakhstan to international standards. Using the method of comparison analysis of the legislation of the Republic of Kazakhstan and norms of international…

Concerning the work of the II international field archaeological school

Directory of Open Access Journals (Sweden)

Sitdikov Ayrat G.

2015-09-01

Full Text Available The II international field archaeological school was held in Bolgar, 17-30 August, 2015. Basic theoretical lectures were included into syllabus, as well as methodical studies and work of such scientific sections as: History of ancient metallurgy and metal processing; Palaeoanthropology; Archeobiological methods in archaeology; Techniques of field conservation and restoration; Geoinformational systems in archaeology; History of ancient ceramics; Experimental and traseology study of ancient tools; Archaeological glass. The Bolgar school is an example of organisation an academic educational centre which is focused on practical acquisition of contemporary techniques of complex archaeological monuments’ study with wide usage of experimental research methods.

Pengaruh Pemasaran Internal dan Kualitas Layanan Internal Terhadap Kepuasan Pelanggan Internal (Studi Pada Industri Kepariwisataan di Daerah Istimewa Yogyakarta

Directory of Open Access Journals (Sweden)

Jumadi Jumadi

2016-06-01

Full Text Available The aim of this research is to investigate the implication of internal marketing and internal service quality effectivity towards internal customer satisfaction in Tourism Industry in Yogyakarta Special Territory. This internal marketing studyinvolves variables of motivation and reward system, effective communication, effective employee's selection, effective recruitment, effective development, effective support system, and healthy work environment. While the internal quality service aspects that will be examined in this study are: tangible, emphaty, responsiveness, reliability and assurance, and then their influences on internal customer satisfaction would be analyzed.The sample size is 210 respondents,which is determined using purposive sampling method. The main instrument for data collection in this study is through questionnaire. The analysis tool used to examine the hypothesis of the study is Structural Equation Modeling using AMOS Version 20.0 Software. The result of the study shows that: Internal marketing and internal quality service significantly influence internal customers satisfation. However, the internal quality service influence the internal customers satisfaction more significantly. Therefore the managers in tourism industry should improve the internal marketing more than the internal quality service.

International collaborative fire modeling project (ICFMP). Summary of benchmark

International Nuclear Information System (INIS)

Roewekamp, Marina; Klein-Hessling, Walter; Dreisbach, Jason; McGrattan, Kevin; Miles, Stewart; Plys, Martin; Riese, Olaf

2008-09-01

This document was developed in the frame of the 'International Collaborative Project to Evaluate Fire Models for Nuclear Power Plant Applications' (ICFMP). The objective of this collaborative project is to share the knowledge and resources of various organizations to evaluate and improve the state of the art of fire models for use in nuclear power plant fire safety, fire hazard analysis and fire risk assessment. The project is divided into two phases. The objective of the first phase is to evaluate the capabilities of current fire models for fire safety analysis in nuclear power plants. The second phase will extend the validation database of those models and implement beneficial improvements to the models that are identified in the first phase of ICFMP. In the first phase, more than 20 expert institutions from six countries were represented in the collaborative project. This Summary Report gives an overview on the results of the first phase of the international collaborative project. The main objective of the project was to evaluate the capability of fire models to analyze a variety of fire scenarios typical for nuclear power plants (NPP). The evaluation of the capability of fire models to analyze these scenarios was conducted through a series of in total five international Benchmark Exercises. Different types of models were used by the participating expert institutions from five countries. The technical information that will be useful for fire model users, developers and further experts is summarized in this document. More detailed information is provided in the corresponding technical reference documents for the ICFMP Benchmark Exercises No. 1 to 5. The objective of these exercises was not to compare the capabilities and strengths of specific models, address issues specific to a model, nor to recommend specific models over others. This document is not intended to provide guidance to users of fire models. Guidance on the use of fire models is currently being

Global Modeling of Internal Tides Within an Eddying Ocean General Circulation Model

Science.gov (United States)

2012-05-31

paper aooo not violate: any Oisclosur~,;·of trade• secrets or suggestions of outside individuals on::oncams whiCh have· beE !n communicated 1.o...fully three- dimensional global ocean circulation model, we will provide an internal tide capability everywhere, and allow nested models to include

Kink dynamics in a parametric ϕ 6 system: a model with controllably many internal modes

Science.gov (United States)

Demirkaya, A.; Decker, R.; Kevrekidis, P. G.; Christov, I. C.; Saxena, A.

2017-12-01

We explore a variant of the ϕ 6 model originally proposed in Phys. Rev. D 12 (1975) 1606 as a prototypical, so-called, "bag" model in which domain walls play the role of quarks within hadrons. We examine the steady state of the model, namely an apparent bound state of two kink structures. We explore its linearization, and we find that, as a function of a parameter controlling the curvature of the potential, an effectively arbitrary number of internal modes may arise in the point spectrum of the linearization about the domain wall profile. We explore some of the key characteristics of kink-antikink collisions, such as the critical velocity and the multi-bounce windows, and how they depend on the principal parameter of the model. We find that the critical velocity exhibits a non-monotonic dependence on the parameter controlling the curvature of the potential. For the multi-bounce windows, we find that their range and complexity decrease as the relevant parameter decreases (and as the number of internal modes in the model increases). We use a modified collective coordinates method [in the spirit of recent works such as Phys. Rev. D 94 (2016) 085008] in order to capture the relevant phenomenology in a semi-analytical manner.

THE IMPORTANCE OF ESTABLISHING A LEGAL FRAMEWORK AND OTHER INTERNAL AUDIT WORK, ESPECIALLY IN THE WORK OF THE TRANSITION COUNTRIES LIKE THE REPUBLIC OF SERBIA

Directory of Open Access Journals (Sweden)

SLOBODAN POPOVIĆ

2016-10-01

Full Text Available Internal auditing the objective examination of evidence provides assurance on the adequacy and functioning of the existing processes of risk management, control and management of the organization, as well as the fact that you mentioned processes are functioning as intended, allowing achievement of the goals of the organization. This allows for better functioning of any company, and it is of great importance for the functioning of the public sector especially in transition countries. In addition to the aforementioned account must be taken and to whom it is intended for internal audit. Internal audit is submitted to top management in the form of internal audit reports, but I state authorities such as the Ministry of Finance sector internal control and audit. Top management if it is to achieve progress must take into account the internal audit, opinion and findings of the internal auditor, and must provide guidance in their work, which are in accordance with the legislation.

Working conditions in seafaring international

DEFF Research Database (Denmark)

Jensen, Olaf Chresten; Canals, M. Luisa

2008-01-01

. The average was 60-80 working hours a week. 60% had 70 hours or more per week and one third more than 80 hours. 80 % worked all the 7 days in the week. Officers were 15-30% among the Philippines and Indonesian seafarers and 80% among the seafarers from United Kingdom and Denmark. 80% of the seafarers from...... frequent involved. Seafarers from the Philippines and Indonesia had low incidence rates of injury. The self-perceived health was generally good among the seafarers, with some national exceptions Conclusions - Remarkable non-equity for work conditions between the nationalities - Working hours per week......Background The world merchant fleet comprise about 1.4 million seafarers. Multi ethnic crews make about 2/3 of the world merchant fleet. The purpose was to descripe important aspects of the working environment for seafarers. Method The seafarers have biannual health examinations and they used 5...

Work Demands, Work-Family Conflict, and Child Adjustment in African American Families: The Mediating Role of Family Routines

Science.gov (United States)

McLoyd, Vonnie C.; Toyokawa, Teru; Kaplan, Rachel

2008-01-01

Using data from a sample of 455 African American children (ages 10 to 12 years) and their parents, this study tests a hypothesized model linking (a) maternal work demands to family routines through work-family conflict and depressive symptoms and (b) maternal work demands to children's externalizing and internalizing problems through family…

International technical working group cooperation to counter illicit nuclear trafficking

International Nuclear Information System (INIS)

Smith, D.K.

2004-01-01

Full text: The Nuclear Smuggling International Technical Working Group (ITWG) is an international group of nuclear forensic experts that cooperate to deter the illicit trafficking of nuclear materials. The objective of the ITWG is to provide a common approach and effective technical solutions to governments who request assistance in nuclear forensics. The ITWG was chartered in 1996 and since that time more than 28 nations and organizations have participated in 9 international meetings and 2 analytical round-robin trials. Soon after its founding the ITWG adopted a general framework to guide nuclear forensics investigations that includes recommendations for nuclear crime scene security and analysis, the best application of radioanalytical methods, the conduct of traditional forensic analysis of contaminated materials, and effective data analysis to interpret the history of seized nuclear materials. This approach has been adopted by many nations as they respond to incidents of illicit nuclear trafficking. ITWG members include policy and decision makers, law enforcement personnel, and scientists with expertise in, and responsibility for, nuclear forensics. It remains an association of active practitioners of nuclear forensics underwritten by funding from sponsoring countries and organizations. While the primary mission of the ITWG continues to be advancing the science and techniques of nuclear forensics and sharing technical and information resources to combat nuclear trafficking, recently the ITWG has focused on improvements to its organization and outreach. Central is the establishment of guidelines for best practices in nuclear forensics, conducting international exercises, promoting research and development, communicating with external organizations, providing a point-of-contact for nuclear forensics assistance, and providing mutual assistance in nuclear forensics investigations. By its very nature nuclear trafficking is a transboundary problem; nuclear materials

International reference reagents: antihuman globulin. An ISBT/ICSH joint working party report. International Society of Blood Transfusion. International Committee for Standardization in Haematology.

Science.gov (United States)

Case, J; Ford, D S; Chung, A; Collins, R; Kochman, S; Mazda, T; Overbeeke, M; Perera, R; Sakuldamrongpanich, T; Scott, M; Voak, D; Zupańska, B

1999-01-01

An international working party has conducted a study designed to select a suitable reference reagent for antihuman globulin, to replace those first made available in 1987. The chosen preparation contains levels of anti-IgG and anti-C3 (anti-C3c and anti-C3d) potency that are considered suitable to serve for reference when evaluating either polyspecific antihuman globulin reagents or those containing their separate monospecific components. The reference material is available in 2-ml freeze-dried aliquots from seven assigned distribution centres.

Nirex methodology for scenario and conceptual model development. An international peer review

International Nuclear Information System (INIS)

1999-06-01

Nirex has responsibilities for nuclear waste management in the UK. The company's top level objectives are to maintain technical credibility on deep disposal, to gain public acceptance for a deep geologic repository, and to provide relevant advice to customers on the safety implications of their waste packaging proposals. Nirex utilizes peer reviews as appropriate to keep its scientific tools up-to-date and to periodically verify the quality of its products. The NEA formed an International Review Team (IRT) consisting of four internationally recognised experts plus a member of the NEA Secretariat. The IRT performed an in-depth analysis of five Nirex scientific reports identified in the terms of reference of the review. The review was to primarily judge whether the Nirex methodology provides an adequate framework to support the building of a future licensing safety case. Another objective was to judge whether the methodology could aid in establishing a better understanding, and, ideally, enhance acceptance of a repository among stakeholders. Methodologies for conducting safety assessments include at a very basic level the identification of features, events, and processes (FEPs) relevant to the system at hand, their convolution in scenarios for analysis, and the formulation of conceptual models to be addressed through numerical modelling. The main conclusion of the IRT is that Nirex has developed a potentially sound methodology for the identification and analysis of FEPs and for the identification of conceptual model needs and model requirements. The work is still in progress and is not yet complete. (R.P.)

The Job Demands-Resources model as predictor of work identity and work engagement: A comparative analysis

Directory of Open Access Journals (Sweden)

Roslyn De Braine

2011-05-01

Research purpose: This study explored possible differences in the Job Demands-Resources model (JD-R as predictor of overall work engagement, dedication only and work-based identity, through comparative predictive analyses. Motivation for the study: This study may shed light on the dedication component of work engagement. Currently no literature indicates that the JD-R model has been used to predict work-based identity. Research design: A census-based survey was conducted amongst a target population of 23134 employees that yielded a sample of 2429 (a response rate of about 10.5%. The Job Demands- Resources scale (JDRS was used to measure job demands and job resources. A work-based identity scale was developed for this study. Work engagement was studied with the Utrecht Work Engagement Scale (UWES. Factor and reliability analyses were conducted on the scales and general multiple regression models were used in the predictive analyses. Main findings: The JD-R model yielded a greater amount of variance in dedication than in work engagement. It, however, yielded the greatest amount of variance in work-based identity, with job resources being its strongest predictor. Practical/managerial implications: Identification and work engagement levels can be improved by managing job resources and demands. Contribution/value-add: This study builds on the literature of the JD-R model by showing that it can be used to predict work-based identity.

A model of turbocharger radial turbines appropriate to be used in zero- and one-dimensional gas dynamics codes for internal combustion engines modelling

Energy Technology Data Exchange (ETDEWEB)

Serrano, J.R.; Arnau, F.J.; Dolz, V.; Tiseira, A. [CMT-Motores Termicos, Universidad Politecnica de Valencia, Camino de Vera s/n, 46022 Valencia (Spain); Cervello, C. [Conselleria de Cultura, Educacion y Deporte, Generalitat Valenciana (Spain)

2008-12-15

The paper presents a model of fixed and variable geometry turbines. The aim of this model is to provide an efficient boundary condition to model turbocharged internal combustion engines with zero- and one-dimensional gas dynamic codes. The model is based from its very conception on the measured characteristics of the turbine. Nevertheless, it is capable of extrapolating operating conditions that differ from those included in the turbine maps, since the engines usually work within these zones. The presented model has been implemented in a one-dimensional gas dynamic code and has been used to calculate unsteady operating conditions for several turbines. The results obtained have been compared with success against pressure-time histories measured upstream and downstream of the turbine during on-engine operation. (author)

A model of turbocharger radial turbines appropriate to be used in zero- and one-dimensional gas dynamics codes for internal combustion engines modelling

International Nuclear Information System (INIS)

Serrano, J.R.; Arnau, F.J.; Dolz, V.; Tiseira, A.; Cervello, C.

2008-01-01

The paper presents a model of fixed and variable geometry turbines. The aim of this model is to provide an efficient boundary condition to model turbocharged internal combustion engines with zero- and one-dimensional gas dynamic codes. The model is based from its very conception on the measured characteristics of the turbine. Nevertheless, it is capable of extrapolating operating conditions that differ from those included in the turbine maps, since the engines usually work within these zones. The presented model has been implemented in a one-dimensional gas dynamic code and has been used to calculate unsteady operating conditions for several turbines. The results obtained have been compared with success against pressure-time histories measured upstream and downstream of the turbine during on-engine operation

International cooperation and amateur meteor work

Science.gov (United States)

Roggemans, P.

Today, the existing framework for international cooperation among amateur meteor workers offers numerous advantages. However, this is a rather recent situation. Meteor astronomy, although popular among amateurs, was the very last topic within astronomy to benefit from a truly international approach. Anyone attempting long term studies of, for instance, meteor stream structures will be confronted with the systematic lack of usable observations due to the absence of any standards in observing, recording and reporting, any archiving or publishing policy. Visual meteor observations represent the overall majority of amateur efforts, while photographic and radio observing were developed only in recent decades as technological specialties of rather few meteor observing teams.

The international radioactive transportation regulations: A model for national regulations

International Nuclear Information System (INIS)

Pope, R.B.; Rawl, R.R.

1990-06-01

The International Atomic Energy Agency's (IAEA) Regulations for the Safe Transport of Radioactive Material, Safety Series No. 6 (herein after denoted as the ''International Regulations'') serve as the model for the regulations for individual countries and international modal organizations controlling the packaging and transportation of radioactive materials. The purpose of this paper is to outline the background and history of the International Regulations, the general principles behind the requirements of the International Regulations, the structure and general contents of the latest edition of the International Regulations, and the roles of various international bodies in the development and implementation of the International Regulations and the current status of regulatory and supportive document development at both the international and domestic level. This review will provide a basis for users and potential users to better understand the source and application of the International Regulations. 1 tab

A model of work-family conflict and well-being among Malaysian working women.

Science.gov (United States)

Aazami, Sanaz; Akmal, Syaqirah; Shamsuddin, Khadijah

2015-01-01

Work and family are the two most important domains in a person's life. Lack of balance between work and family can lead to adverse consequences such as psychological distress; however, the effect of work-family conflict on psychological distress might be mediated by job and family dissatisfaction. This study examines a model of the four dimensions of work-family conflict and their consequences on psychological distress. In particular, we test whether job and family satisfaction mediate the effect of the four dimensions of work-family conflict on psychological distress. This cross-sectional study was conducted among 567 Malaysian women who are working in the public services. Structural Equation Modeling confirmed the mediating role of family satisfaction in the effect of strain-based work interference into family and time-based family interference into work on psychological distress. In addition, our results revealed a significant path that links job to family satisfaction. Moreover, time-based work interference into family and strain-based family interference into work significantly and negatively affect job satisfaction, which in turn influence family satisfaction and eventually affect psychological distress. The results of our study show that organizations need to develop and adapt family friendly policies to mitigate level of employees' work-family conflict.

A new coal-permeability model: Internal swelling stress and fracture-matrix interaction

Energy Technology Data Exchange (ETDEWEB)

Liu, H.H.; Rutqvist, J.

2009-10-01

We have developed a new coal-permeability model for uniaxial strain and constant confining stress conditions. The model is unique in that it explicitly considers fracture-matrix interaction during coal deformation processes and is based on a newly proposed internal-swelling stress concept. This concept is used to account for the impact of matrix swelling (or shrinkage) on fracture-aperture changes resulting from partial separation of matrix blocks by fractures that do not completely cut through the whole matrix. The proposed permeability model is evaluated with data from three Valencia Canyon coalbed wells in the San Juan Basin, where increased permeability has been observed during CH{sub 4} gas production, as well as with published data from laboratory tests. Model results are generally in good agreement with observed permeability changes. The importance of fracture-matrix interaction in determining coal permeability, demonstrated in this work using relatively simple stress conditions, underscores the need for a dual-continuum (fracture and matrix) mechanical approach to rigorously capture coal-deformation processes under complex stress conditions, as well as the coupled flow and transport processes in coal seams.

International Competition and Inequality: A Generalized Ricardian Model

OpenAIRE

Adolfo Figueroa

2014-01-01

Why does the gap in real wage rates persist between the First World and the Third World after so many years of increasing globalization? The standard neoclassical trade model predicts that real wage rates will be equalized with international trade, whereas the standard Ricardian trade model does not. Facts are thus consistent with the Ricardian model. However, this model leaves undetermined income distribution. The objective of this paper is to fill this gap by developing a generalized Ricard...

Spontaneous cortical activity reveals hallmarks of an optimal internal model of the environment.

Science.gov (United States)

Berkes, Pietro; Orbán, Gergo; Lengyel, Máté; Fiser, József

2011-01-07

The brain maintains internal models of its environment to interpret sensory inputs and to prepare actions. Although behavioral studies have demonstrated that these internal models are optimally adapted to the statistics of the environment, the neural underpinning of this adaptation is unknown. Using a Bayesian model of sensory cortical processing, we related stimulus-evoked and spontaneous neural activities to inferences and prior expectations in an internal model and predicted that they should match if the model is statistically optimal. To test this prediction, we analyzed visual cortical activity of awake ferrets during development. Similarity between spontaneous and evoked activities increased with age and was specific to responses evoked by natural scenes. This demonstrates the progressive adaptation of internal models to the statistics of natural stimuli at the neural level.

The International Reference Ionosphere 2012 – a model of international collaboration

Czech Academy of Sciences Publication Activity Database

Bilitza, D.; Altadill, D.; Zhang, Y.; Mertens, Ch.; Truhlík, Vladimír; Richards, P.; McKinnell, L.- A.; Reinisch, B.

2014-01-01

Roč. 4, 20 February (2014), A07/1-A07/12 ISSN 2115-7251 R&D Projects: GA MŠk(CZ) LH11123 Institutional support: RVO:68378289 Keywords : International Reference Ionosphere * empirical models * plasma parameters * real - time IRI Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 2.558, year: 2014 http://www.swsc-journal.org/articles/swsc/abs/2014/01/swsc130043/swsc130043.html

Strategies for Enhancing Nonlinear Internal Model Control of pH Processes

Energy Technology Data Exchange (ETDEWEB)

Hu, Qiuping.; Rangaiah, G.P. [The National University of Singapore, Singapore (Singapore). Dept. of Chemical and Environmental Engineering

1999-02-01

Control of neutralization processes is very difficult due to nonlinear dynamics, different types of disturbances and modeling errors. The objective of the paper is to evaluate two strategies (augmented internal model control, AuIMC and adaptive internal model control, AdIMC) for enhancing pH control by nonlinear internal model control (NIMC). A NIMC controller is derived directly form input output linearization. The AuIMC is composed of NIMC and an additional loop through which the difference between the process and model outputs is fed back and added to the input of the controller. For the AdIMC, and adaptive law with two tuning parameters is proposed for estimating the unknown parameter. Both AuIMC and AdIMC are extensively tested via simulation for pH neutralization. The theoretical and simulation results show that both the proposed strategies can reduce the effect of modeling errors and disturbances, and thereby enhance the performance of NIMC for pH processes. (author)

Validation of an internal hardwood log defect prediction model

Science.gov (United States)

R. Edward. Thomas

2011-01-01

The type, size, and location of internal defects dictate the grade and value of lumber sawn from hardwood logs. However, acquiring internal defect knowledge with x-ray/computed-tomography or magnetic-resonance imaging technology can be expensive both in time and cost. An alternative approach uses prediction models based on correlations among external defect indicators...

Working document dispersion models

International Nuclear Information System (INIS)

Dop, H. van

1988-01-01

This report is a summary of the most important results from June 1985 of the collaboration of the RIVM (Dutch National Institute for Public Health and Environment Hygiene) and KNMI (Royal Dutch Meteorologic Institute) on the domain of dispersion models. It contains a short description of the actual SO x /NO x -model. Furthermore it contains recommendations for modifications of some numerical-mathematical aspects and an impulse to a more complete description of chemical processes in the atmosphere and the (wet) deposition process. A separate chapter is devoted to the preparation of meteorologic data which are relevant for dispersion as well as atmospheric chemistry and deposition. This report serves as working document for the final formulation of a acidifying- and oxidant-model. (H.W.). 69 refs.; 51 figs.; 13 tabs.; 3 schemes

An International Model for Antibiotics Regulation.

Science.gov (United States)

Aguirre, Emilie

We face a global antibiotics resistance crisis. Antibiotic drugs are rapidly losing their effectiveness, potentially propelling us toward a post-antibiotic world. The largest use of antibiotics in the world is in food-producing animals. Food producers administer these drugs in routine, low doses—the types of doses that are incidentally the most conducive to breeding antibiotic resistance. In general, individual countries have been too slow to act in regulating misuse and overuse of antibiotics in foodproducing animals. This problem will only worsen with the significant projected growth in meat consumption and production expected in emerging economies in the near future. Although individual countries regulating antibiotics can have important effects, one country alone cannot insulate itself entirely from the effects of antibiotic resistance, nor can one country solve the crisis for itself or for the world. The global nature of the food system and the urgency of the problem require immediate global solutions. Adapting a democratic experimentalist approach at the international level can help achieve this goal. Using an international democratic experimentalist framework in conjunction with the World Organization for Animal Health (OIE) would provide for increased systematized data collection and lead to heightened, scientifically informed OIE standards, enforceable by the World Trade Organization (WTO), which could have a significant impact on the reduction of subtherapeutic use of antibiotics internationally. International democratic experimentalism addresses the global intricacy, time sensitivity, context- and culture-specificity, and knowledgeintensiveness of this problem. By encouraging more countries to experiment to solve this problem, the democratic experimentalist model would help develop a larger database of solutions to enable more meaningful cross-country comparisons across a wider range of contexts. This approach maintains democratic governance and

6th International Workshop on Model Reduction in Reactive Flow

Science.gov (United States)

2018-01-01

reduction in reacting flow . Registration DateRegistration TypeFirst Name Middle NameLast Name Affiliation US State /Canadian ProvinceState/Province/R gion...Report: 6th International Workshop on Model Reduction in Reactive Flow The views, opinions and/or findings contained in this report are those of the...Agreement Number: W911NF-17-1-0121 Organization: Princeton University Title: 6th International Workshop on Model Reduction in Reactive Flow Report Term

Physical model study of neutron noise induced by vibration of reactor internals

International Nuclear Information System (INIS)

Liu Jinhui; Gu Fangyu

1999-01-01

The author presents a physical model of neutron noise induced by reactor internals vibration in frequency domain. Based on system control theory, the reactor dynamic equations are coupled with random vibration equation, and non-linear terms are also taken into accounted while treating the random vibration. Experiments carried out on a zero-power reactor show that the model can be used to describe dynamic character of neutron noise induced by internals' vibration. The model establishes a method to help to determine internals'vibration features, and to diagnosis anomalies through neutron noise

WORK AND POWER ANALYSIS OF THE GOLF SWING

Directory of Open Access Journals (Sweden)

Steven M. Nesbit

2005-12-01

Full Text Available A work and power (energy analysis of the golf swing is presented as a method for evaluating the mechanics of the golf swing. Two computer models were used to estimate the energy production, transfers, and conversions within the body and the golf club by employing standard methods of mechanics to calculate work of forces and torques, kinetic energies, strain energies, and power during the golf swing. A detailed model of the golf club determined the energy transfers and conversions within the club during the downswing. A full-body computer model of the golfer determined the internal work produced at the body joints during the downswing. Four diverse amateur subjects were analyzed and compared using these two models. The energy approach yielded new information on swing mechanics, determined the force and torque components that accelerated the club, illustrated which segments of the body produced work, determined the timing of internal work generation, measured swing efficiencies, calculated shaft energy storage and release, and proved that forces and range of motion were equally important in developing club head velocity. A more comprehensive description of the downswing emerged from information derived from an energy based analysis

Comparison of Three Models Dealing with Working Memory and Its Dimensions in Second Language Acquisition

Directory of Open Access Journals (Sweden)

Abdulaziz Alshahrani

2017-12-01

Full Text Available The current status of research on working memory (WM and its components in second language acquisition (SLA was examined in this review. Literature search was done on four aspects using search terms in Google Scholar. Hence, the review results are given and introduced. 1. In the definition of WM, some confusion exists on whether short term memory (STM or recent memory is the same as WM or different. 2. In this review, three main models have been discussed elaborately, as they are the only ones discussed in literature. They are: multicomponent model of Baddeley (2000, embedded process model of Cowan (2005 and attention control model of Engle and Kane (2003. 3. The phonological and executive components of WM were examined in more detail, as these determine the two basic aspects of language acquisition: language characteristics and acquisition methods (Wen, 2012. Overall, the variables related to phonological and executive working memories are evident from published research, but their interactive relationships and affecting factors are not entirely clear. 4. Admittedly, several diverse internal and external factors affect WM in relation to SLA. Some practically useful interventions are indicated by certain findings.

A model of strategic marketing alliances for hospices: vertical, internal, osmotic alliances and the complete model.

Science.gov (United States)

Starnes, B J; Self, D R

1999-01-01

This article develops two previous research efforts. William J. Winston (1994, 1995) has proposed a set of strategies by which health care organizations can benefit from forging strategic alliances. Raadt and Self (1997) have proposed a classification model of alliances including horizontal, vertical, internal, and osmotic. In the second of two articles, this paper presents a model of vertical, internal, and osmotic alliances. Advantages and disadvantages of each are discussed. Finally, the complete alliance system model is presented.

A Design Method of Robust Servo Internal Model Control with Control Input Saturation

OpenAIRE

山田, 功; 舩見, 洋祐

2001-01-01

In the present paper, we examine a design method of robust servo Internal Model Control with control input saturation. First of all, we clarify the condition that Internal Model Control has robust servo characteristics for the system with control input saturation. From this consideration, we propose new design method of Internal Model Control with robust servo characteristics. A numerical example to illustrate the effectiveness of the proposed method is shown.

Modelling and controlling infectious diseases | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

The research team is exploring the potential of mathematical modelling to ... to China's health system and improvements to its medical research capacity. ... and on the scientific board of the Gates Foundation's Global Health program. ... He has published more than 400 research papers in national and international journals.

International Nuclear Model personal computer (PCINM): Model documentation

International Nuclear Information System (INIS)

1992-08-01

The International Nuclear Model (INM) was developed to assist the Energy Information Administration (EIA), U.S. Department of Energy (DOE) in producing worldwide projections of electricity generation, fuel cycle requirements, capacities, and spent fuel discharges from commercial nuclear reactors. The original INM was developed, maintained, and operated on a mainframe computer system. In spring 1992, a streamlined version of INM was created for use on a microcomputer utilizing CLIPPER and PCSAS software. This new version is known as PCINM. This documentation is based on the new PCINM version. This document is designed to satisfy the requirements of several categories of users of the PCINM system including technical analysts, theoretical modelers, and industry observers. This document assumes the reader is familiar with the nuclear fuel cycle and each of its components. This model documentation contains four chapters and seven appendices. Chapter Two presents the model overview containing the PCINM structure and process flow, the areas for which projections are made, and input data and output reports. Chapter Three presents the model technical specifications showing all model equations, algorithms, and units of measure. Chapter Four presents an overview of all parameters, variables, and assumptions used in PCINM. The appendices present the following detailed information: variable and parameter listings, variable and equation cross reference tables, source code listings, file layouts, sample report outputs, and model run procedures. 2 figs

Selected research works published in international journals on Vietnam environmental radioactivity

International Nuclear Information System (INIS)

2012-01-01

The environmental radioactivity is object of many studies of the Vietnam Atomic Energy Institute (VINATOM). The VINATOM for long time has carried out monitoring of environmental radioactivity and application of isotopes in investigation of natural resources for socio-economic development in Vietnam. A lot of results of the studies in monitoring and application of radiation and isotopes have been presented at conferences. Some excellent research works have been published in prestigious international journals and selected to republish in this collection. The publication is expected to be as reference material for researchers, postgraduates in the field of environment protection. (NHA)

International Trade. International Business

OpenAIRE

Мохнюк, А. М.; Mokhniuk, A. M.

2015-01-01

Work programme of the study course “International Trade. International Business” was prepared in accordance with educational and vocational training program for bachelors of training direction 6.030601 “Management”.

Global partnering related to nuclear materials safeguards and security - A pragmatic approach to international safeguards work

International Nuclear Information System (INIS)

Stanford, Dennis

2007-01-01

This paper documents issues Nuclear Fuel Services, Inc. has addressed in the performance of international work to safeguards and security work. It begins with a description of the package we put together for a sample proposal for the Global Threat Reduction Initiative, for which we were ranked number one for technical approach and cost, and concludes with a discussion of approaches that we have taken to performing this work, including issues related to performing the work as part of a team. The primary focus is on communication, workforce, equipment, and coordination issues. Finally, the paper documents the rules that we use to assure the work is performed safely and successfully. (author)

Startle reduces recall of a recently learned internal model.

Science.gov (United States)

Wright, Zachary; Patton, James L; Ravichandran, Venn

2011-01-01

Recent work has shown that preplanned motor programs are released early from subcortical areas by the using a startling acoustic stimulus (SAS). Our question is whether this response might also contain a recently learned internal model, which draws on experience to predict and compensate for expected perturbations in a feedforward manner. Studies of adaptation to robotic forces have shown some evidence of this, but were potentially confounded by cocontraction caused by startle. We performed a new adaptation experiment using a visually distorted field that could not be confounded by cocontraction. We found that in all subjects that exhibited startle, the startle stimulus (1) reduced performance of the recently learned task (2) reduced after-effect magnitudes. Because startle reduced but did not eliminate the recall of learned control, we suggest that multiple neural centers (cortical and subcortical) are involved in such learning and adaptation, which can impact training areas such as piloting, teleoperation, sports, and rehabilitation. © 2011 IEEE

A geometric model for magnetizable bodies with internal variables

Directory of Open Access Journals (Sweden)

Restuccia, L

2005-11-01

Full Text Available In a geometrical framework for thermo-elasticity of continua with internal variables we consider a model of magnetizable media previously discussed and investigated by Maugin. We assume as state variables the magnetization together with its space gradient, subjected to evolution equations depending on both internal and external magnetic fields. We calculate the entropy function and necessary conditions for its existence.

Fifteenth annual meeting of the International Working Group on Fast Reactors. Summary report

International Nuclear Information System (INIS)

1982-09-01

The Fifteenth Annual Meeting of the IWGFR was held in accordance with the recommendation of the previous Annual Group Meeting, in Obninsk, USSR, Vienna from 30 March to 2 April 1982. The meeting was attended by the Member States of the group: France, the Federal Republic of Germany, Italy, Japan, the United Kingdom, and the USA, as well as by representatives from CEC, IAEA and OECD and observer from the USSR. This document includes: review of the IWGFR Activities for the period since the Eleventh Annual Meeting of the Group; preliminary programme of international conference on breeder reactors as a world energy resource and the breeder fuel cycle; list of meetings on atomic energy which may be of interest to the IWGFR Members; IWGFR criteria for supporting some of the international conferences; list of proposed topics for the IWGFR Specialists' Meetings; list of topics for review articles on LMFBR recommended for publication by the IAEA; list of meetings sponsored by the IWGFR; a list of members of the International Working Group on Fast Reactors

Sixteenth annual meeting of the International Working Group on Fast Reactors. Summary report

Energy Technology Data Exchange (ETDEWEB)

NONE

1983-10-01

The Sixteenth Annual Meeting of the IWGFR was held in accordance with the recommendation of the previous Annual Meeting Group, in Vienna from 12-15 April 1983. The meeting was attended by the Member States of the group: France, the Federal Republic of Germany, Italy, Japan, the United Kingdom, and the USA, as well as by representatives from CEC, IAEA and OECD and observer from the USSR. This document includes: review of the IWGFR Activities for the period since the Eleventh Annual Meeting of the Group; preliminary programme of international conference on breeder reactors as a world energy resource and the breeder fuel cycle; list of meetings on atomic energy which may be of interest to the IWGFR Members; IWGFR criteria for supporting some of the international conferences; list of proposed topics for the IWGFR Specialists' Meetings; list of topics for review articles on LMFBR recommended for publication by the IAEA; list of meetings sponsored by the IWGFR; a list of members of the International Working Group on Fast Reactors.

Fifteenth annual meeting of the International Working Group on Fast Reactors. Summary report

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-09-01

The Fifteenth Annual Meeting of the IWGFR was held in accordance with the recommendation of the previous Annual Group Meeting, in Obninsk, USSR, Vienna from 30 March to 2 April 1982. The meeting was attended by the Member States of the group: France, the Federal Republic of Germany, Italy, Japan, the United Kingdom, and the USA, as well as by representatives from CEC, IAEA and OECD and observer from the USSR. This document includes: review of the IWGFR Activities for the period since the Eleventh Annual Meeting of the Group; preliminary programme of international conference on breeder reactors as a world energy resource and the breeder fuel cycle; list of meetings on atomic energy which may be of interest to the IWGFR Members; IWGFR criteria for supporting some of the international conferences; list of proposed topics for the IWGFR Specialists' Meetings; list of topics for review articles on LMFBR recommended for publication by the IAEA; list of meetings sponsored by the IWGFR; a list of members of the International Working Group on Fast Reactors.

Sixteenth annual meeting of the International Working Group on Fast Reactors. Summary report

International Nuclear Information System (INIS)

1983-10-01

The Sixteenth Annual Meeting of the IWGFR was held in accordance with the recommendation of the previous Annual Meeting Group, in Vienna from 12-15 April 1983. The meeting was attended by the Member States of the group: France, the Federal Republic of Germany, Italy, Japan, the United Kingdom, and the USA, as well as by representatives from CEC, IAEA and OECD and observer from the USSR. This document includes: review of the IWGFR Activities for the period since the Eleventh Annual Meeting of the Group; preliminary programme of international conference on breeder reactors as a world energy resource and the breeder fuel cycle; list of meetings on atomic energy which may be of interest to the IWGFR Members; IWGFR criteria for supporting some of the international conferences; list of proposed topics for the IWGFR Specialists' Meetings; list of topics for review articles on LMFBR recommended for publication by the IAEA; list of meetings sponsored by the IWGFR; a list of members of the International Working Group on Fast Reactors

International Space Station Centrifuge Rotor Models A Comparison of the Euler-Lagrange and the Bond Graph Modeling Approach

Science.gov (United States)

Nguyen, Louis H.; Ramakrishnan, Jayant; Granda, Jose J.

2006-01-01

The assembly and operation of the International Space Station (ISS) require extensive testing and engineering analysis to verify that the Space Station system of systems would work together without any adverse interactions. Since the dynamic behavior of an entire Space Station cannot be tested on earth, math models of the Space Station structures and mechanical systems have to be built and integrated in computer simulations and analysis tools to analyze and predict what will happen in space. The ISS Centrifuge Rotor (CR) is one of many mechanical systems that need to be modeled and analyzed to verify the ISS integrated system performance on-orbit. This study investigates using Bond Graph modeling techniques as quick and simplified ways to generate models of the ISS Centrifuge Rotor. This paper outlines the steps used to generate simple and more complex models of the CR using Bond Graph Computer Aided Modeling Program with Graphical Input (CAMP-G). Comparisons of the Bond Graph CR models with those derived from Euler-Lagrange equations in MATLAB and those developed using multibody dynamic simulation at the National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) are presented to demonstrate the usefulness of the Bond Graph modeling approach for aeronautics and space applications.

Looking beyond general metrics for model comparison - lessons from an international model intercomparison study

Science.gov (United States)

de Boer-Euser, Tanja; Bouaziz, Laurène; De Niel, Jan; Brauer, Claudia; Dewals, Benjamin; Drogue, Gilles; Fenicia, Fabrizio; Grelier, Benjamin; Nossent, Jiri; Pereira, Fernando; Savenije, Hubert; Thirel, Guillaume; Willems, Patrick

2017-01-01

International collaboration between research institutes and universities is a promising way to reach consensus on hydrological model development. Although model comparison studies are very valuable for international cooperation, they do often not lead to very clear new insights regarding the relevance of the modelled processes. We hypothesise that this is partly caused by model complexity and the comparison methods used, which focus too much on a good overall performance instead of focusing on a variety of specific events. In this study, we use an approach that focuses on the evaluation of specific events and characteristics. Eight international research groups calibrated their hourly model on the Ourthe catchment in Belgium and carried out a validation in time for the Ourthe catchment and a validation in space for nested and neighbouring catchments. The same protocol was followed for each model and an ensemble of best-performing parameter sets was selected. Although the models showed similar performances based on general metrics (i.e. the Nash-Sutcliffe efficiency), clear differences could be observed for specific events. We analysed the hydrographs of these specific events and conducted three types of statistical analyses on the entire time series: cumulative discharges, empirical extreme value distribution of the peak flows and flow duration curves for low flows. The results illustrate the relevance of including a very quick flow reservoir preceding the root zone storage to model peaks during low flows and including a slow reservoir in parallel with the fast reservoir to model the recession for the studied catchments. This intercomparison enhanced the understanding of the hydrological functioning of the catchment, in particular for low flows, and enabled to identify present knowledge gaps for other parts of the hydrograph. Above all, it helped to evaluate each model against a set of alternative models.

Waves in geophysical fluids tsunamis, rogue waves, internal waves and internal tides

CERN Document Server

Schneider, Wilhelm; Trulsen, Karsten

2006-01-01

Waves in Geophysical Fluids describes: the forecasting and risk evaluation of tsunamis by tectonic motion, land slides, explosions, run-up, and maps the tsunami sources in the world's oceans; stochastic Monte-Carlo simulations and focusing mechanisms for rogue waves, nonlinear wave models, breather formulas, and the kinematics of the Draupner wave; the full story about the discovery of the very large oceanic internal waves, how the waves are visible from above through the signatures on the sea surface, and how to compute them; observations of energetic internal tides and hot spots from several field campaigns in all parts of the world's oceans, with interpretation of spectra. An essential work for students, scientists and engineers working with the fundamental and applied aspects of ocean waves.

THE MODEL OF MANAGEMENT OF THE INTERNAL MARKETING OF HIGHER EDUCATION INSTITUTE

Directory of Open Access Journals (Sweden)

Yuliya Viktorovna Naurazbaeva

2015-12-01

Full Text Available The main purpose of the research is the development of methods and models of management of the internal marketing of a higher education institute based on complex approach that includes strategic management methods and staff marketing and also technologies of Neuro-Linguistic Programming (NLP.Method or methodology of the research. Adapted models and methods of Neuro-Linguistic Programming, strategic management and marketing to management of marketing of the university which are presented as a complex of models that are reveling through the interrelation «external labor-market – higher education institute – internal labor-market».Results:1. The mechanism of management of the internal marketing of higher education institute based on the interrelation «external labor – market – higher education institute – internal labor-market» is offered that assumes solving problem of miscomparison between market conditions, university’s opportunities and demands of an employee of this educational institute.2. Methodical bases of formation of NLP-model that coordinates the requirements of labor collective as internal consumers of the educational service and needs of higher education institute in order to provide high quality services at all stages of creation and realization of an educational service are developed.3. The infological model of construction and choosing the strategy of the internal marketing of educational institute is presented.Practical implications. The received results can be used in practical management of higher education institute when forming the strategy of the internal marketing taking into account the specific features of concrete university.

MODELING WORK OF SORTING STATION USING UML

Directory of Open Access Journals (Sweden)

O. V. Gorbova

2014-12-01

Full Text Available Purpose. The purpose of this paper is the construction of methods and models for the graphical representation process of sorting station, using the unified modeling language (UML. Methodology. Methods of graph theory, finite automata and the representation theory of queuing systems were used as the methods of investigation. A graphical representation of the process was implemented with using the Unified Modeling Language UML. The sorting station process representation is implemented as a state diagram and actions through a set of IBM Rational Rose. Graphs can show parallel operation of sorting station, the parallel existence and influence of objects process and the transition from one state to another. The IBM Rational Rose complex allows developing a diagram of work sequence of varying degrees of detailing. Findings. The study has developed a graphical representation method of the process of sorting station of different kind of complexity. All graphical representations are made using the UML. They are represented as a directed graph with the states. It is clear enough in the study of the subject area. Applying the methodology of the representation process, it allows becoming friendly with the work of any automation object very fast, and exploring the process during algorithms construction of sorting stations and other railway facilities. This model is implemented with using the Unified Modeling Language (UML using a combination of IBM Rational Rose. Originality. The representation process of sorting station was developed by means of the Unified Modeling Language (UML use. Methodology of representation process allows creating the directed graphs based on the order of execution of the works chain, objects and performers of these works. The UML allows visualizing, specifying, constructing and documenting, formalizing the representation process of sorting station and developing sequence diagrams of works of varying degrees of detail. Practical

International Geomagnetic Reference Field: the 12th generation

DEFF Research Database (Denmark)

Thébault, Erwan; Finlay, Chris; Beggan, Ciarán D.

2015-01-01

The 12th generation of the International Geomagnetic Reference Field (IGRF) was adopted in December 2014 by the Working Group V-MOD appointed by the International Association of Geomagnetism and Aeronomy (IAGA). It updates the previous IGRF generation with a definitive main field model for epoch ...

International Technical Working Group Round Robin Tests

International Nuclear Information System (INIS)

Dudder, Gordon B.; Hanlen, Richard C.; Herbillion, Georges M.

2003-01-01

The goal of nuclear forensics is to develop a preferred approach to support illicit trafficking investigations. This approach must be widely understood and accepted as credible. The principal objectives of the Round Robin Tests are to prioritize forensic techniques and methods, evaluate attribution capabilities, and examine the utility of database. The HEU (Highly Enriched Uranium) Round Robin, and previous Plutonium Round Robin, have made tremendous contributions to fulfilling these goals through a collaborative learning experience that resulted from the outstanding efforts of the nine participating internal laboratories. A prioritized list of techniques and methods has been developed based on this exercise. Current work is focused on the extent to which the techniques and methods can be generalized. The HEU Round Robin demonstrated a rather high level of capability to determine the important characteristics of the materials and processes using analytical methods. When this capability is combined with the appropriate knowledge/database, it results in a significant capability to attribute the source of the materials to a specific process or facility. A number of shortfalls were also identified in the current capabilities including procedures for non-nuclear forensics and the lack of a comprehensive network of data/knowledge bases. The results of the Round Robin will be used to develop guidelines or a ''recommended protocol'' to be made available to the interested authorities and countries to use in real cases

20th International Conference on Difference Equations and Applications

CERN Document Server

Ding, Yiming; Došlý, Ondřej

2015-01-01

These proceedings of the 20th International Conference on Difference Equations and Applications cover the areas of difference equations, discrete dynamical systems, fractal geometry, difference equations and biomedical models, and discrete models in the natural sciences, social sciences and engineering. The conference was held at the Wuhan Institute of Physics and Mathematics, Chinese Academy of Sciences (Hubei, China), under the auspices of the International Society of Difference Equations (ISDE) in July 2014. Its purpose was to bring together renowned researchers working actively in the respective fields, to discuss the latest developments, and to promote international cooperation on the theory and applications of difference equations. This book will appeal to researchers and scientists working in the fields of difference equations, discrete dynamical systems and their applications.

A Multiagent Modeling Environment for Simulating Work Practice in Organizations

Science.gov (United States)

Sierhuis, Maarten; Clancey, William J.; vanHoof, Ron

2004-01-01

In this paper we position Brahms as a tool for simulating organizational processes. Brahms is a modeling and simulation environment for analyzing human work practice, and for using such models to develop intelligent software agents to support the work practice in organizations. Brahms is the result of more than ten years of research at the Institute for Research on Learning (IRL), NYNEX Science & Technology (the former R&D institute of the Baby Bell telephone company in New York, now Verizon), and for the last six years at NASA Ames Research Center, in the Work Systems Design and Evaluation group, part of the Computational Sciences Division (Code IC). Brahms has been used on more than ten modeling and simulation research projects, and recently has been used as a distributed multiagent development environment for developing work practice support tools for human in-situ science exploration on planetary surfaces, in particular a human mission to Mars. Brahms was originally conceived of as a business process modeling and simulation tool that incorporates the social systems of work, by illuminating how formal process flow descriptions relate to people s actual located activities in the workplace. Our research started in the early nineties as a reaction to experiences with work process modeling and simulation . Although an effective tool for convincing management of the potential cost-savings of the newly designed work processes, the modeling and simulation environment was only able to describe work as a normative workflow. However, the social systems, uncovered in work practices studied by the design team played a significant role in how work actually got done-actual lived work. Multi- tasking, informal assistance and circumstantial work interactions could not easily be represented in a tool with a strict workflow modeling paradigm. In response, we began to develop a tool that would have the benefits of work process modeling and simulation, but be distinctively able to

Relationship between long working hours and depression in two working populations: a structural equation model approach.

Science.gov (United States)

Amagasa, Takashi; Nakayama, Takeo

2012-07-01

To test the hypothesis that relationship reported between long working hours and depression was inconsistent in previous studies because job demand was treated as a confounder. Structural equation modeling was used to construct five models, using work-related factors and depressive mood scale obtained from 218 clerical workers, to test for goodness of fit and was externally validated with data obtained from 1160 sales workers. Multiple logistic regression analysis was also performed. The model that showed that long working hours increased depression risk when job demand was regarded as an intermediate variable was the best fitted model (goodness-of-fit index/root-mean-square error of approximation: 0.981 to 0.996/0.042 to 0.044). The odds ratio for depression risk with work that was high demand and 60 hours or more per week was estimated at 2 to 4 versus work that was low demand and less than 60 hours per week. Long working hours increased depression risk, with job demand being an intermediate variable.

Exploring the Internal Dynamics of Globular Clusters

Science.gov (United States)

Watkins, Laura L.; van der Marel, Roeland; Bellini, Andrea; Luetzgendorf, Nora; HSTPROMO Collaboration

2018-01-01

Exploring the Internal Dynamics of Globular ClustersThe formation histories and structural properties of globular clusters are imprinted on their internal dynamics. Energy equipartition results in velocity differences for stars of different mass, and leads to mass segregation, which results in different spatial distributions for stars of different mass. Intermediate-mass black holes significantly increase the velocity dispersions at the centres of clusters. By combining accurate measurements of their internal kinematics with state-of-the-art dynamical models, we can characterise both the velocity dispersion and mass profiles of clusters, tease apart the different effects, and understand how clusters may have formed and evolved.Using proper motions from the Hubble Space Telescope Proper Motion (HSTPROMO) Collaboration for a set of 22 Milky Way globular clusters, and our discrete dynamical modelling techniques designed to work with large, high-quality datasets, we are studying a variety of internal cluster properties. We will present the results of theoretical work on simulated clusters that demonstrates the efficacy of our approach, and preliminary results from application to real clusters.

Internal variability in a regional climate model over West Africa

Energy Technology Data Exchange (ETDEWEB)

Vanvyve, Emilie; Ypersele, Jean-Pascal van [Universite catholique de Louvain, Institut d' astronomie et de geophysique Georges Lemaitre, Louvain-la-Neuve (Belgium); Hall, Nicholas [Laboratoire d' Etudes en Geophysique et Oceanographie Spatiales/Centre National d' Etudes Spatiales, Toulouse Cedex 9 (France); Messager, Christophe [University of Leeds, Institute for Atmospheric Science, Environment, School of Earth and Environment, Leeds (United Kingdom); Leroux, Stephanie [Universite Joseph Fourier, Laboratoire d' etude des Transferts en Hydrologie et Environnement, BP53, Grenoble Cedex 9 (France)

2008-02-15

Sensitivity studies with regional climate models are often performed on the basis of a few simulations for which the difference is analysed and the statistical significance is often taken for granted. In this study we present some simple measures of the confidence limits for these types of experiments by analysing the internal variability of a regional climate model run over West Africa. Two 1-year long simulations, differing only in their initial conditions, are compared. The difference between the two runs gives a measure of the internal variability of the model and an indication of which timescales are reliable for analysis. The results are analysed for a range of timescales and spatial scales, and quantitative measures of the confidence limits for regional model simulations are diagnosed for a selection of study areas for rainfall, low level temperature and wind. As the averaging period or spatial scale is increased, the signal due to internal variability gets smaller and confidence in the simulations increases. This occurs more rapidly for variations in precipitation, which appear essentially random, than for dynamical variables, which show some organisation on larger scales. (orig.)

A New Conceptual Model for Understanding International Students' College Needs

Science.gov (United States)

Alfattal, Eyad

2016-01-01

This study concerns the theory and practice of international marketing in higher education with the purpose of exploring a conceptual model for understanding international students' needs in the context of a four-year college in the United States. A transcendental phenomenological design was employed to investigate the essence of international…

Part-time work and work hour preferences : An international comparison

NARCIS (Netherlands)

Wielers, Rudolf; Münderlein, Maria; Koster, Ferry

2013-01-01

The goal of this article is to explain cross-country differences in over- and under-employment. The focus is on the effects of the growth of part-time work. We argue and demonstrate that the spread and acceptance of part-time work results in a downward adaptation of descriptive norms regulating work

Thermal resistance of rotating closed-loop pulsating heat pipes: Effects of working fluids and internal diameters

Directory of Open Access Journals (Sweden)

Kammuang-Lue Niti

2017-01-01

Full Text Available The objective of this study was to experimentally investigate the effects of working fluids and internal diameters on the thermal resistance of rotating closed-loop pul¬sating heat pipes (RCLPHP. The RCLPHP were made of a copper tube with internal diameters of 1.50 mm and 1.78 mm, bent into the shape of a flower petal, and arranged into a circle with 11 turns. The evaporator section was located at the outer end of the tube bundle. R123, ethanol, and water were filled as the working fluids. The RCLPHP was rotated at centrifugal accelerations 0.5, 1, 3, 5, 10, and 20 times of the gravitational acceleration considered at the connection between the evaporator and the condenser sections. The heat input was varied from 30 W to 50 W, and then to 100 W, 150 W, and 200 W. It can be concluded that when the latent heat of evaporation increases, the pressure difference between the evaporator and the condenser sections decreases, and the thermal resistance increases. Moreover, when the internal diameter increases, the driving force increases and the frictional force proportionally decreases, or the Karman number increases, and the thermal resistance decreases.

Response of subassembly model with internals

International Nuclear Information System (INIS)

Kennedy, J.M.; Belytschko, T.

1977-01-01

For the purpose of predicting the structural response in such accident environments, a program STRAW has been developed. This is a finite element program which can treat the structure-fluid system consisting of the coolant and the subassembly walls. Both material nonlinearities due to elastic-plastic response and geometric nonlinearities due to large displacements can be treated. The energy source can be represented either by a pressure-time history or an equation of state. Because of the lack of any simplifying symmetry in the geometry of the subassembly the program uses a quasi-three dimensional model. The cross section of the accident hexcan and the adjacent hexcan are modelled by a two-dimensional finite element mesh which represents the hexcan walls by flexural element and the internals by two-dimensional continuum elements. This mesh is coupled to a series of one-dimensional elements which represent the axial flow of the coolant and the longitudinal stiffness of the fuel pins and hexcan. The latter is of importance in the adjacent hexcan, for its lateral displacement is resisted entirely by this flexural behavior and its inertia. The adequacy of such quasi-three dimensional models has been examined by comparing the STRAW results against almost complete three-dimensonal analysis performed with the REXCAT program. In this program, the accident hexcan is represented in a true three-dimensional sense by plate-shell elements, whereas the internals are represented as axisymmetric. These comparisons indicate that the quasi-three-dimensional approach employed in STRAW is valid for a large range of pressure time histories; the fidelity of this model suffers primarily when pressure reaches a peak over a very short time, such as 5-10 microseconds

Technical committee meeting on Liquid Metal Fast Reactor (LMFR) developments. 33rd annual meeting of the International Working Group on Fast Reactors (IWG-FR). Working material

International Nuclear Information System (INIS)

2000-01-01

Over the past 33 years, the IAEA has actively encouraged and advocated international cooperation in fast reactor technology. The present publication contains information on the status of fast reactor development and on worldwide activities in this advanced nuclear power technology during 1999/2000, as reported at the 33. annual meeting of the International Working Group on Fast Reactors. It is intended to provide information regarding the current status of LMFR development in IAEA Member States

Teaching `community engagement' in engineering education for international development: Integration of an interdisciplinary social work curriculum

Science.gov (United States)

Gilbert, Dorie J.; Lehman Held, Mary; Ellzey, Janet L.; Bailey, William T.; Young, Laurie B.

2015-05-01

This article reviews the literature on challenges faced by engineering faculty in educating their students on community-engaged, sustainable technical solutions in developing countries. We review a number of approaches to increasing teaching modules on social and community components of international development education, from adding capstone courses and educational track seminars to integrating content from other disciplines, particularly the social sciences. After summarising recent pedagogical strategies to increase content on community-focused development, we present a case study of how one engineering programme incorporates social work students and faculty to infuse strategies for community engagement in designing and implementing student-led global engineering development projects. We outline how this interdisciplinary pedagogical approach teaches students from the two disciplines to work together in addressing power balances, economic and social issues and overall sustainability of international development projects.

Smooth Adaptive Internal Model Control Based on U Model for Nonlinear Systems with Dynamic Uncertainties

Directory of Open Access Journals (Sweden)

Li Zhao

2016-01-01

Full Text Available An improved smooth adaptive internal model control based on U model control method is presented to simplify modeling structure and parameter identification for a class of uncertain dynamic systems with unknown model parameters and bounded external disturbances. Differing from traditional adaptive methods, the proposed controller can simplify the identification of time-varying parameters in presence of bounded external disturbances. Combining the small gain theorem and the virtual equivalent system theory, learning rate of smooth adaptive internal model controller has been analyzed and the closed-loop virtual equivalent system based on discrete U model has been constructed as well. The convergence of this virtual equivalent system is proved, which further shows the convergence of the complex closed-loop discrete U model system. Finally, simulation and experimental results on a typical nonlinear dynamic system verified the feasibility of the proposed algorithm. The proposed method is shown to have lighter identification burden and higher control accuracy than the traditional adaptive controller.

Resource-sharing between internal maintenance and external selection modulates attentional capture by working memory content

Directory of Open Access Journals (Sweden)

Anastasia eKiyonaga

2014-08-01

Full Text Available It is unclear why and under what circumstances working memory (WM and attention interact. Here, we apply the logic of the time-based resource-sharing (TBRS model of WM (e.g., Barrouillet, Bernardin, & Camos, 2004 to explore the mixed findings of a separate, but related, literature that studies the guidance of visual attention by WM contents. Specifically, we hypothesize that the linkage between WM representations and visual attention is governed by a time-shared cognitive resource that alternately refreshes internal (WM and selects external (visual attention information. If this were the case, WM content should guide visual attention (involuntarily, but only when there is time for it to be refreshed in an internal focus of attention. To provide an initial test for this hypothesis, we examined whether the amount of unoccupied time during a WM delay could impact the magnitude of attentional capture by WM contents. Participants were presented with a series of visual search trials while they maintained a WM cue for a delayed-recognition test. WM cues could coincide with the search target, a distracter, or neither. We varied both the number of searches to be performed, and the amount of available time to perform them. Slowing of visual search by a WM matching distracter—and facilitation by a matching target—were curtailed when the delay was filled with fast-paced (refreshing-preventing search trials, as was subsequent memory probe accuracy. WM content may, therefore, only capture visual attention when it can be refreshed, suggesting that internal (WM and external attention demands reciprocally impact one another because they share a limited resource. The TBRS rationale can thus be applied in a novel context to explain why WM contents capture attention, and under what conditions that effect should be observed.

131I-SPGP internal dosimetry: animal model and human extrapolation

International Nuclear Information System (INIS)

Andrade, Henrique Martins de; Ferreira, Andrea Vidal; Soprani, Juliana; Santos, Raquel Gouvea dos; Figueiredo, Suely Gomes de

2009-01-01

Scorpaena plumieri is commonly called moreia-ati or manganga and is the most venomous and one of the most abundant fish species of the Brazilian coast. Soprani 2006, demonstrated that SPGP - an isolated protein from S. plumieri fish- possess high antitumoral activity against malignant tumours and can be a source of template molecules for the development (design) of antitumoral drugs. In the present work, Soprani's 125 ISPGP biokinetic data were treated by MIRD formalism to perform Internal Dosimetry studies. Absorbed doses due to the 131 I-SPGP uptake were determinate in several organs of mice, as well as in the implanted tumor. Doses obtained for animal model were extrapolated to humans assuming a similar ratio for various mouse and human tissues. For the extrapolation, it was used human organ masses from Cristy/Eckerman phantom. Both penetrating and non-penetrating radiation from 131 I were considered. (author)

A theory of viscoplasticity accounting for internal damage

Science.gov (United States)

Freed, A. D.; Robinson, D. N.

1988-01-01

A constitutive theory for use in structural and durability analyses of high temperature isotropic alloys is presented. Constitutive equations based upon a potential function are determined from conditions of stability and physical considerations. The theory is self-consistent; terms are not added in an ad hoc manner. It extends a proven viscoplastic model by introducing the Kachanov-Rabotnov concept of net stress. Material degradation and inelastic deformation are unified; they evolve simultaneously and interactively. Both isotropic hardening and material degradation evolve with dissipated work which is the sum of inelastic work and internal work. Internal work is a continuum measure of the stored free energy resulting from inelastic deformation.

MODEL EVALUASI INTERNAL KOMPETENSI GURU BAHASA INGGRIS (MODEL_EIKGBI) SMA

OpenAIRE

Sahraini Sahraini; Suwarsih Madya

2015-01-01

Studi ini bertujuan untuk: (1) mengembangkan model evaluasi kompetensi guru bahasa Inggris SMA yang dapat digunakan untuk mengidentifikasi kelebihan dan kekurangan guru dalam proses pemelajaran dan (2) mengetahui efektivitas implementasi evaluasi internal kompetensi guru bahasa Inggris SMA. Studi ini menggunakan metode penelitian dan pengembangan yang dikembangkan oleh Borg & Gall (1983, p.775). Subjek penelitian berjumlah 17 guru yang berasal dari 7 SMA di Sulawesi Selatan. Konstruk instrume...

Coupling internal cerebellar models enhances online adaptation and supports offline consolidation in sensorimotor tasks.

Science.gov (United States)

Passot, Jean-Baptiste; Luque, Niceto R; Arleo, Angelo

2013-01-01

The cerebellum is thought to mediate sensorimotor adaptation through the acquisition of internal models of the body-environment interaction. These representations can be of two types, identified as forward and inverse models. The first predicts the sensory consequences of actions, while the second provides the correct commands to achieve desired state transitions. In this paper, we propose a composite architecture consisting of multiple cerebellar internal models to account for the adaptation performance of humans during sensorimotor learning. The proposed model takes inspiration from the cerebellar microcomplex circuit, and employs spiking neurons to process information. We investigate the intrinsic properties of the cerebellar circuitry subserving efficient adaptation properties, and we assess the complementary contributions of internal representations by simulating our model in a procedural adaptation task. Our simulation results suggest that the coupling of internal models enhances learning performance significantly (compared with independent forward and inverse models), and it allows for the reproduction of human adaptation capabilities. Furthermore, we provide a computational explanation for the performance improvement observed after one night of sleep in a wide range of sensorimotor tasks. We predict that internal model coupling is a necessary condition for the offline consolidation of procedural memories.

Coupling internal cerebellar models enhances online adaptation and supports offline consolidation in sensorimotor tasks

Directory of Open Access Journals (Sweden)

Jean-Baptiste ePassot

2013-07-01

Full Text Available The cerebellum is thought to mediate sensorimotor adaptation through the acquisition of internal models of the body–environment interaction. These representations can be of two types, identified as forward and inverse models. The first predicts the sensory consequences of actions, while the second provides the correct commands to achieve desired state transitions. In this paper, we propose a composite architecture consisting of multiple cerebellar internal models to account for the adaptation performance of humans during sensorimotor learning. The proposed model takes inspiration from the cerebellar microcomplex circuit, and employs spiking neurons to process information. We investigate the intrinsic properties of the cerebellar circuitry subserving efficient adaptation properties, and we assess the complementary contributions of internal representations by simulating our model in a procedural adaptation task. Our simulation results suggest that the coupling of internal models enhances learning performance significantly (compared with independent forward and inverse models, and it allows for the reproduction of human adaptation capabilities. Furthermore, we provide a computational explanation for the performance improvement observed after one night of sleep in a wide range of sensorimotor tasks. We predict that internal model coupling is a necessary condition for the offline consolidation of procedural memories.

Thermodynamic model of a diesel engine to work with gas produced from biomass gasification

International Nuclear Information System (INIS)

Lesme Jaén, René; Silva Jardines, Fernando; Rodríguez Ortíz, Leandro Alexei; García Faure, Luis Gerónimo; Peralta Campos, Leonel Grave de; Oliva Ruiz, Luis; Iglesias Vaillant, Yunier

2017-01-01

The poor gas, obtained from the gasification of the biomass with air, has a high content of volatile substances, high stability to the ignition and can be used in internal combustion engines. In the present work the results of a thermodynamic model for a Diesel engine AshokLeyland, installed in 'El Brujo' sawmill of the Gran Piedra Baconao Forestry Company of Santiago de Cuba. From the composition and the combustion equation of the poor gas, the thermodynamic cycle calculation and the energy balance of the engine for different loads. Cycle parameters, fuel air ratio, CO2 emissions, engine power and performance were determined. As the main result of the work, the engine had an effective efficiency of 22.3%, consumed 3605.5 grams of fuel / KWh and emits 2055 grams of CO2 / kWh. (author)

Work stress and work-based learning in secondary education : testing the Karasek model

NARCIS (Netherlands)

Kwakman, Kitty

2001-01-01

In this study the Job Demand-Control model was used to study the quality of working life of Dutch secondary teachers. The Job Demand-Control model of Karasek is a theoretical model in which stress and learning are both considered as dependent variables which are influenced by three different task

Work stress and work based learning in secondary education: Testing the Karasek model

NARCIS (Netherlands)

Kwakman, Kitty

1999-01-01

In this study the Job Demand-Control model was used to study the quality of working life of Dutch secondary teachers. The Job Demand-Control model of Karasek is a theoretical model in which stress and learning are both considered as dependent variables which are influenced by three different task

‘Reaching Out’: international models for transitional care for teenage and young adult cancer patients

Directory of Open Access Journals (Sweden)

Charlotte Weston

2018-05-01

Full Text Available Background: This article will give an overview of ‘Reaching Out’, a project to identify international models of transitional care for adolescent and young adult (AYA cancer patients. Aims: •\tExplore provision of AYA cancer care in a different cultural context •\tIdentify new models of care for supporting transition between paediatric, AYA and adult care, and between acute and primary care •\tIdentify relevant resources and service designs that could be adapted for use in AYA services in the UK Methods: Three-week observational visit in a range of international healthcare settings. Findings: Similarities and differences between Australian and UK healthcare systems were observed. Models of care using a range of resources, including structured health and wellbeing programmes, were identified to support transitional care. Models of collaborative working across organisations were observed. The implementation of innovative programmes to improve efficiency of services and limit unnecessary impact on patient time and finances were identified, including the use of Skype for collaborative consultations between acute and community healthcare providers. Conclusions: Recommendations to benefit AYA patients with an improved range of supportive, holistic services and improved person-centred care include: •\tJoint AYA nursing posts between AYA centres to support transition •\tStructured AYA post-treatment health and wellbeing programme •\tProgramme of creative wellbeing projects to support transition at the end of treatment Scope use of Skype appointments within the AYA service Implications for practice: Observing service provision and healthcare practice in an international setting provides the opportunity to improve cross-cultural competence, which is essential to culturally competent care. Cross-cultural competence supports the improvement of patient care through experiential learning, sharing of ideas and connecting with others. The

Enterprise Interoperability - Proceedings of the 5th International IFIP Working Conference on Enterprise Interoperability, IWEI 2013

NARCIS (Netherlands)

van Sinderen, Marten J.; Oude Luttighuis, P.H.W.M.; Folmer, Erwin Johan Albert; Bosems, S.; Unknown, [Unknown

IWEI is an International IFIP Working Conference covering all aspects of enterprise interoperability with the purpose of achieving flexible cross-organizational collaboration through integrated support at business and technical levels. It provides a forum for discussing ideas and results among both

Mathematical modeling of sleep state dynamics in a rodent model of shift work

Directory of Open Access Journals (Sweden)

Michael J. Rempe

2018-06-01

Full Text Available Millions of people worldwide are required to work when their physiology is tuned for sleep. By forcing wakefulness out of the body’s normal schedule, shift workers face numerous adverse health consequences, including gastrointestinal problems, sleep problems, and higher rates of some diseases, including cancers. Recent studies have developed protocols to simulate shift work in rodents with the intention of assessing the effects of night-shift work on subsequent sleep (Grønli et al., 2017. These studies have already provided important contributions to the understanding of the metabolic consequences of shift work (Arble et al., 2015; Marti et al., 2016; Opperhuizen et al., 2015 and sleep-wake-specific impacts of night-shift work (Grønli et al., 2017. However, our understanding of the causal mechanisms underlying night-shift-related sleep disturbances is limited. In order to advance toward a mechanistic understanding of sleep disruption in shift work, we model these data with two different approaches. First we apply a simple homeostatic model to quantify differences in the rates at which sleep need, as measured by slow wave activity during slow wave sleep (SWS rises and falls. Second, we develop a simple and novel mathematical model of rodent sleep and use it to investigate the timing of sleep in a simulated shift work protocol (Grønli et al., 2017. This mathematical framework includes the circadian and homeostatic processes of the two-process model, but additionally incorporates a stochastic process to model the polyphasic nature of rodent sleep. By changing only the time at which the rodents are forced to be awake, the model reproduces some key experimental results from the previous study, including correct proportions of time spent in each stage of sleep as a function of circadian time and the differences in total wake time and SWS bout durations in the rodents representing night-shift workers and those representing day-shift workers

A Dynamic Programming Model for Internal Attack Detection in Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Qiong Shi

2017-01-01

Full Text Available Internal attack is a crucial security problem of WSN (wireless sensor network. In this paper, we focus on the internal attack detection which is an important way to locate attacks. We propose a state transition model, based on the continuous time Markov chain (CTMC, to study the behaviors of the sensors in a WSN under internal attack. Then we conduct the internal attack detection model as the epidemiological model. In this model, we explore the detection rate as the rate of a compromised state transition to a response state. By using the Bellman equation, the utility for the state transitions of a sensor can be written in standard forms of dynamic programming. It reveals a natural way to find the optimal detection rate that is by maximizing the total utility of the compromised state of the node (the sum of current utility and future utility. In particular, we encapsulate the current state, survivability, availability, and energy consumption of the WSN into an information set. We conduct extensive experiments and the results show the effectiveness of our solutions.

Coupling internal cerebellar models enhances online adaptation and supports offline consolidation in sensorimotor tasks

OpenAIRE

Passot , Jean-Baptiste; Luque , Niceto R.; Arleo , Angelo

2013-01-01

International audience; The cerebellum is thought to mediate sensorimotor adaptation through the acquisition of internal models of the body-environment interaction. These representations can be of two types, identified as forward and inverse models. The first predicts the sensory consequences of actions, while the second provides the correct commands to achieve desired state transitions. In this paper, we propose a composite architecture consisting of multiple cerebellar internal models to ac...

Internal audit risk management in metropolitan municipalities

Directory of Open Access Journals (Sweden)

Christo Ackermann

2016-07-01

Full Text Available Internal audit functions (IAFs of organisations are regarded as crucial components of the combined assurance model, alongside the audit committee, management and external auditors. The combined assurance model aims at having integrated and aligned assurance in organisations with the overall aim of maximising risk and governance oversight and control efficiencies. In this regard, internal audit plays a crucial role, insofar as it consists of experts in risk, governance and control consultancy who provide assurance to senior management and the audit committee. Audit committees are dependent on internal audit for information and their effectiveness revolves around a strong and well-resourced internal audit function which is able to aid audit committees to meet their oversight responsibilities. There is thus a growing demand for managing risk through the process of risk management and internal audit is in a perfect position to assist with the improvement of such processes. If internal auditors wish to continue being an important aspect of the combined assurance model, they need to address the critical area, amongst others, of risk management as part of their work. If not, it follows that the board, audit committees and other levels of management will remain uninformed on the status of these matters which, in turn, will negatively impact the ability of these stakeholders to discharge their responsibilities. This study therefore focuses on analysing the functioning of IAFs, with specific reference to their risk management mandate. The study followed a mixed method approach to describe internal audits risk management functioning in the big eight metropolitan municipalities in South Africa. The results show that internal audit provide a broad scope of risk management work which assist senior management in the discharge of their responsibilities. However, in the public eye, internal audits risk management functioning is scant

International working group on life management of nuclear power plants (IWG-LMNPP). Regular meeting. 30 August - 1 September 1995. Working material. V. 2

International Nuclear Information System (INIS)

1995-01-01

This meeting of the International Working Group on Life Management of Nuclear Power Plants (IWG-LMNPP) was organized to review the national programmes of the countries and to advise the IAEA on its technical meetings and activities in the subject areas taking into consideration current progress, problems and operating experience. Refs, figs and tabs

International working group on life management of nuclear power plants (IWG-LMNPP). Regular meeting. 30 August - 1 September 1995. Working material. V. 1

International Nuclear Information System (INIS)

1995-01-01

This meeting of the International Working Group on Life Management of Nuclear Power Plants (IWG-LMNPP) was organized to review the national programmes of the countries and to advise the IAEA on its technical meetings and activities in the subject areas taking into consideration current progress, problems and operating experience. Refs, figs and tabs

International note: Prediction of mathematics work ethic and performance from behavioral, normative, and control beliefs among Qatari adolescents.

Science.gov (United States)

Areepattamannil, Shaljan; Abdelfattah, Faisal; Mahasneh, Randa Ali; Khine, Myint Swe; Welch, Anita G; Melkonian, Michael; Al Nuaimi, Samira Ahmed

2016-01-01

Over half-a-million adolescents take part in each cycle of the Program for International Student Assessment (PISA). Yet often, researchers and policy makers across the globe tend to focus their attention primarily on the academic trajectories of adolescents hailing from highly successful education systems. Hence, a vast majority of the adolescent population who regionally and globally constitute the 'long tail of underachievement' often remain unnoticed and underrepresented in the growing literature on adolescents' academic trajectories. The present study, therefore, explored the relations of dispositions toward mathematics, subjective norms in mathematics, and perceived control of success in mathematics to mathematics work ethic as well as mathematics performance; and the mediational role of mathematics work ethic in the association between dispositional, normative, and control beliefs and mathematics performance among adolescents in one of the lowest performing education systems, Qatar. Structural equation modeling (SEM) analyses revealed that Qatari adolescents' dispositional, normative, and control beliefs about mathematics were significantly associated with their mathematics work ethic and mathematics performance, and mathematics work ethic significantly mediated the relationship between dispositional, normative, and control beliefs about mathematics and mathematics performance. However, multi-group SEM analyses indicated that these relationships were not invariant across the gender and the SES groups. Copyright © 2015 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

Domestic Work: Challenges for Decent Work

Directory of Open Access Journals (Sweden)

Solange Sanches

2009-09-01

Full Text Available This article presents an overview of the situation of the domestic workers and focuses on some issues related to its dimension in the world and in Brazil, to their conditions of work and its importance to the labor market and to the households. We aim to demonstrate the relevance of the concept of decent work, promoted by ILO – International Labor Organization, for the domestic work and the need to extend their rights to level them with the other workers. It also highlights the opportunity offered by the next International Labor Conference, in 2010, when one of the issues of the agenda is to discuss the crafting and adoption of international labor standards in the form of a specific convention or recommendation.

Management of water hyacinth: Final meeting and international conference. Working paper submitted by the Regional Coordinator

International Nuclear Information System (INIS)

1981-01-01

Full text: Final Meeting. This meeting will essentially make a terminal review of the project and register final records of work done on the various aspects, such as: - biology of the plant; - biological control; - biogas; - wastewater treatment; - papers and boards; - integrated systems, etc. We should have at the meeting a complete account of the work done in the project under each of the above headings. For example, under 'biogas' we should prepare one consolidated account of work carried out in all the three participating countries rather than individual country reports. Likewise on 'papers and boards', and the other items. To enable preparation of reports in this form there should naturally be prior consultations and contacts among the concerned investigators by correspondence and, if necessary, personal visits. These reports will then be edited and compiled by the Regional Coordinator in the form of a book or monograph on the Management of Water Hyacinth project as a whole. Contributors to chapters will be cited. International Conference. Independent of the consolidated reports, national coordinators may prepare papers for presentation at the proposed international conference. These papers could be prepared m the usual form and style for publication in international scientific journals. Although several papers could be prepared out of work done by us, we may consider the desirability of limiting the number, in order to give adequate opportunities for the other invited participants to the conference. There would be no bar on publication of these scientific papers after the conference in appropriate journals irrespective of whether a separate volume on proceedings of the conference is brought out or not. India would be happy to host the terminal review meeting to be followed by the conference. The likely period would be last week of January to first week in February, 1983. (author)

International Working Group on Fast Reactors Thirteenth Annual Meeting. Summary Report. Part II

International Nuclear Information System (INIS)

1980-10-01

The Thirteenth Annual Meeting of the IAEA International Working Group on Fast Reactors was held at the IAEA Headquarters, Vienna, Austria from 9 to 11 April 1980. The Summary Report (Part I) contains the Minutes of the Meeting. The Summary Report (Part II) contains the papers which review the national programme in the field of LMFBRs and other presentations at the Meeting. The Summary Report (Part III) contains the discussions on the review of the national programmes

International Working Group on Fast Reactors Thirteenth Annual Meeting. Summary Report. Part I

International Nuclear Information System (INIS)

1980-09-01

The Thirteenth Annual Meeting of the IAEA International Working Group on Fast Reactors was held at the IAEA Headquarters, Vienna, Austria from 9 to 11 April 1980. The Summary Report (Part I) contains the Minutes of the Meeting. The Summary Report (Part II) contains the papers which review the national programme in the field of LMFBRs and other presentations at the Meeting. The Summary Report (Part III) contains the discussions on the review of the national programmes

International Working Group on Past Reactors Thirteenth Annual Meeting. Summary Report. Part III

International Nuclear Information System (INIS)

1981-04-01

The Thirteenth Annual Meeting of the IAEA International Working Group on Fast Reactors was held at the IAEA Headquarters, Vienna, Austria from 9 to 11 April 1980. The Summary Report (Part I) contains the Minutes of the Meeting. The Summary Report (Part II) contains the papers which review the national programme in the field of LMFBRs and other presentations at the Meeting. The Summary Report (Part III) contains the discussions on the review of the national programmes

Testing the "Work Ability House" Model in hospital workers.

Science.gov (United States)

Martinez, Maria Carmen; Latorre, Maria do Rosário Dias de Oliveira; Fischer, Frida Marina

2016-01-01

To test the Work Ability House model, verifying the hierarchy of proposed dimensions, among a group of hospital workers. A cohort study (2009-2011) was conducted with a sample of 599 workers from a hospital in the city of São Paulo. A questionnaire including sociodemographics, lifestyle and working conditions was used. The Brazilian versions of Job Stress Scale, Effort-Reward Imbalance, Work-Related Activities That May Contribute To Job-Related Pain and/or Injury, and the Work Ability Index (WAI) were also used. A hierarchical logistic regression analysis was performed: the independent variables were allocated into levels according to the dimensions of the theoretical model in order to evaluate the factors associated with work ability. Variables associated with impairment of work ability in each dimension were as follows: (a) sociodemographics: age work injuries (p = 0.029), (c) professional competence: low educational level (p = 0.008), (d) values : intensified in overcommitment (p work: intensification of effort-reward imbalance (p = 0.009) and high demands (p = 0.040). The results confirmed the dimensions proposed for the Work Ability House model, indicating that it is valid as a representation of a multidimensional construct of multifactorial determination and can be used in the management of work ability.

A general phenomenological model for work function

Science.gov (United States)

Brodie, I.; Chou, S. H.; Yuan, H.

2014-07-01

A general phenomenological model is presented for obtaining the zero Kelvin work function of any crystal facet of metals and semiconductors, both clean and covered with a monolayer of electropositive atoms. It utilizes the known physical structure of the crystal and the Fermi energy of the two-dimensional electron gas assumed to form on the surface. A key parameter is the number of electrons donated to the surface electron gas per surface lattice site or adsorbed atom, which is taken to be an integer. Initially this is found by trial and later justified by examining the state of the valence electrons of the relevant atoms. In the case of adsorbed monolayers of electropositive atoms a satisfactory justification could not always be found, particularly for cesium, but a trial value always predicted work functions close to the experimental values. The model can also predict the variation of work function with temperature for clean crystal facets. The model is applied to various crystal faces of tungsten, aluminium, silver, and select metal oxides, and most demonstrate good fits compared to available experimental values.

Working memory: theories, models, and controversies.

Science.gov (United States)

Baddeley, Alan

2012-01-01

I present an account of the origins and development of the multicomponent approach to working memory, making a distinction between the overall theoretical framework, which has remained relatively stable, and the attempts to build more specific models within this framework. I follow this with a brief discussion of alternative models and their relationship to the framework. I conclude with speculations on further developments and a comment on the value of attempting to apply models and theories beyond the laboratory studies on which they are typically based.

Adoptive parenting and attachment: association of the Internal Working Models between adoptive mothers and their late-adopted children during adolescence

Directory of Open Access Journals (Sweden)

Cecilia Serena ePace

2015-09-01

Full Text Available Introduction. Recent literature has shown that the good outcome of adoption would mostly depend on the quality of adoptive parenting, which is strongly associated with the security of parental internal working models (IWMs of attachment. Specifically, attachment states-of-mind of adoptive mothers classified as free and autonomous and without lack of resolution of loss or trauma could represent a good protective factor for adopted children previously maltreated and neglected. While most research on adoptive families has focused on pre-school and school-aged children, the aim of this study was to assess the concordance of IWMs of attachment in adoptive dyads during adolescence.Method. Our pilot-study involved 76 participants: 30 adoptive mothers (mean age=51.5±4.3, and their 46 late-adopted adolescents (mean age = 13.9 ± 1.6, who were all aged four to nine years old at time of adoption (M = 6.3 ± 1.5. Attachment representations of adopted adolescents were assessed by the Friend and Family Interview (FFI, while adoptive mothers’ state-of-mind with respect to attachment was classified by the Adult Attachment Interview (AAI. Adolescents’ verbal intelligence was controlled.Results. Late-adopted adolescents were classified as follows: 67% secure, 26% dismissing and 7% preoccupied in the FFI, while their adoptive mothers’ AAI classifications were 70% free-autonomous, 7% dismissing, and 23% unresolved. We found a significant concordance of 70% (32 dyads between the secure-insecure FFI and AAI classifications. Specifically adoptive mothers with high coherence of transcript and low unresolved loss tend to have late-adopted children with high secure attachment, even if the adolescents’ verbal intelligence made a significant contribution to this prediction.Discussion. Our results provides an empirical contribution to the literature concerning the concordance of attachment in adoptive dyads, highlighting the beneficial impact of highly coherent

Hospital nurses' wellbeing at work: a theoretical model.

Science.gov (United States)

Utriainen, Kati; Ala-Mursula, Leena; Kyngäs, Helvi

2015-09-01

To develop a theoretical model of hospital nurses' wellbeing at work. The concept of wellbeing at work is presented without an exact definition and without considering different contents. A model was developed in a deductive manner and empirical data collected from nurses (n = 233) working in a university hospital. Explorative factor analysis was used. The main concepts were: patients' experience of high-quality care; assistance and support among nurses; nurses' togetherness and cooperation; fluent practical organisation of work; challenging and meaningful work; freedom to express diverse feelings in the work community; well-conducted everyday nursing; status related to the work itself; fair and supportive leadership; opportunities for professional development; fluent communication with other professionals; and being together with other nurses in an informal way. Themes included: collegial relationships; enhancing high-quality patient care; supportive and fair leadership; challenging, meaningful and well organised work; and opportunities for professional development. Object-dependent wellbeing was supported. Managers should focus on strengthening the positive aspect of wellbeing at work, focusing on providing fluently organised work practices, fair and supportive leadership and togetherness while allowing nurses to implement their own ideas and promote the experience of meaningfulness. © 2014 John Wiley & Sons Ltd.

International Technical Working Group Round Robin Tests

Energy Technology Data Exchange (ETDEWEB)

Dudder, Gordon B.; Hanlen, Richard C.; Herbillion, Georges M.

2003-02-01

The goal of nuclear forensics is to develop a preferred approach to support illicit trafficking investigations. This approach must be widely understood and accepted as credible. The principal objectives of the Round Robin Tests are to prioritize forensic techniques and methods, evaluate attribution capabilities, and examine the utility of database. The HEU (Highly Enriched Uranium) Round Robin, and previous Plutonium Round Robin, have made tremendous contributions to fulfilling these goals through a collaborative learning experience that resulted from the outstanding efforts of the nine participating internal laboratories. A prioritized list of techniques and methods has been developed based on this exercise. Current work is focused on the extent to which the techniques and methods can be generalized. The HEU Round Robin demonstrated a rather high level of capability to determine the important characteristics of the materials and processes using analytical methods. When this capability is combined with the appropriate knowledge/database, it results in a significant capability to attribute the source of the materials to a specific process or facility. A number of shortfalls were also identified in the current capabilities including procedures for non-nuclear forensics and the lack of a comprehensive network of data/knowledge bases. The results of the Round Robin will be used to develop guidelines or a ''recommended protocol'' to be made available to the interested authorities and countries to use in real cases.

Modelling and analysis of international recycling between developed and developing countries

NARCIS (Netherlands)

van Beukering, P.J.H.; van den Bergh, J.C.J.M.

2006-01-01

To deal with the complexity of recycling, a wide variety of models have been developed, each serving a specific purpose. Despite the current trend increasing international trade in recycling-related material flows, the international dimension of physical and economic relationships in recycling is

Human Rights and International Labour Law issues concerning Migrant Women Working as Domestic Helpers in China

NARCIS (Netherlands)

Peng, Q.|info:eu-repo/dai/nl/375803998

2017-01-01

This book addresses the human rights and international labour law issues concerning rural migrant women workers as domestic helpers in China and offers several legislative suggestions to the Chinese government. By describing the current de facto and de jure condition of rural migrant women working

Modelling fatigue and the use of fatigue models in work settings.

Science.gov (United States)

Dawson, Drew; Ian Noy, Y; Härmä, Mikko; Akerstedt, Torbjorn; Belenky, Gregory

2011-03-01

In recent years, theoretical models of the sleep and circadian system developed in laboratory settings have been adapted to predict fatigue and, by inference, performance. This is typically done using the timing of prior sleep and waking or working hours as the primary input and the time course of the predicted variables as the primary output. The aim of these models is to provide employers, unions and regulators with quantitative information on the likely average level of fatigue, or risk, associated with a given pattern of work and sleep with the goal of better managing the risk of fatigue-related errors and accidents/incidents. The first part of this review summarises the variables known to influence workplace fatigue and draws attention to the considerable variability attributable to individual and task variables not included in current models. The second part reviews the current fatigue models described in the scientific and technical literature and classifies them according to whether they predict fatigue directly by using the timing of prior sleep and wake (one-step models) or indirectly by using work schedules to infer an average sleep-wake pattern that is then used to predict fatigue (two-step models). The third part of the review looks at the current use of fatigue models in field settings by organizations and regulators. Given their limitations it is suggested that the current generation of models may be appropriate for use as one element in a fatigue risk management system. The final section of the review looks at the future of these models and recommends a standardised approach for their use as an element of the 'defenses-in-depth' approach to fatigue risk management. Copyright © 2010 Elsevier Ltd. All rights reserved.

Modelling the internal boundary layer over the lower fraser valley, British Columbia

Energy Technology Data Exchange (ETDEWEB)

Batchvarova, E. [National Inst. of Meteorology and Hydrology, Sofia (Bulgaria); Steyn, D. [Univ. of British Columbia, Dept. of Geography, Vancouver (Canada); Cai, X. [Univ. of Birmingham, School of Geography, Edgbaston (United Kingdom); Gryning, S.E. [Risoe National Lab., Roskilde (Denmark); Baldi, M. [Inst. for Atmospheric Physics, IFA-CNR, Rome (Italy)

1997-10-01

In this study we use the very extensive data-set on temporal and spatial structure of the internal boundary layer on the Lower Faser Valley, Canada, collected during the so-called Pacific `93 field campaign, to study the ability of the simple applied model by Gryning and Batchvarova (1996) and the CSU-RAMS meso-scale model summarised in Pielke et al. (1992) to describe the development and variability of the internal boundary layer depth during the course of a day. Given the complexity of topography, coastline and land-use in the Lower Fraser Valley region, both models perform remarkably well. The simple applied model performs extremely well, given its simplicity. It is clear that correct specification of spatially resolved surface sensible heat flux and wind field are crucial to the success of this model which can be operated at very fine spatial resolution. The 3D model performs extremely well, though it too must capture the local wind field correctly for complete success. Its limited horizontal resolution results in strongly smoothed internal boundary layer height fields. (LN)

Fourth Collaborative Materials Exercise of the Nuclear Forensics International Technical Working Group

International Nuclear Information System (INIS)

Schwantes, J.M.; Reilly, D.; Marsden, O.

2018-01-01

The Nuclear Forensics International Technical Working Group is a community of nuclear forensic practitioners who respond to incidents involving nuclear and other radioactive material out of regulatory control. The Group is dedicated to advancing nuclear forensic science in part through periodic participation in materials exercises. The Group completed its fourth Collaborative Materials Exercise in 2015 in which laboratories from 15 countries and one multinational organization analyzed three samples of special nuclear material in support of a mock nuclear forensic investigation. This special section of the Journal for Radioanalytical and Nuclear Chemistry is devoted to summarizing highlights from this exercise. (author)

The ICRP working party on bioassay interpretation

International Nuclear Information System (INIS)

Fry, F.A.; Lipsztein, J.L.; Birchall, A.

2003-01-01

In recent years there have been many developments in modelling the behaviour of radionuclides in the human body. The current generation of models are designed to be more 'realistic' than the previous generation of simple compartment models. The International Commission on Radiological Protection (ICRP) uses these models to produce dose coefficients and recognises that there is a need to give more guidance on how these models can be used to interpret bioassay data. A working party has been set up to address the issue. This paper describes some of the problems, some approaches to solving the problems and the progress of the ICRP working party. (author)

131I-CRTX internal dosimetry: animal model and human extrapolation

International Nuclear Information System (INIS)

Andrade, Henrique Martins de; Ferreira, Andrea Vidal; Soares, Marcella Araugio; Silveira, Marina Bicalho; Santos, Raquel Gouvea dos

2009-01-01

Snake venoms molecules have been shown to play a role not only in the survival and proliferation of tumor cells but also in the processes of tumor cell adhesion, migration and angiogenesis. 125 I-Crtx, a radiolabeled version of a peptide derived from Crotalus durissus terrificus snake venom, specifically binds to tumor and triggers apoptotic signalling. At the present work, 125 I-Crtx biokinetic data (evaluated in mice bearing Erlich tumor) were treated by MIRD formalism to perform Internal Dosimetry studies. Doses in several organs of mice were determinate, as well as in implanted tumor, for 131 I-Crtx. Doses results obtained for animal model were extrapolated to humans assuming a similar concentration ratio among various tissues between mouse and human. In the extrapolation, it was used human organ masses from Cristy/Eckerman phantom. Both penetrating and non-penetrating radiation from 131 I in the tissue were considered in dose calculations. (author)

Family process and youth internalizing problems: A triadic model of etiology and intervention.

Science.gov (United States)

Schleider, Jessica L; Weisz, John R

2017-02-01

Despite major advances in the development of interventions for youth anxiety and depression, approximately 30% of youths with anxiety do not respond to cognitive behavioral treatment, and youth depression treatments yield modest symptom decreases overall. Identifying networks of modifiable risk and maintenance factors that contribute to both youth anxiety and depression (i.e., internalizing problems) may enhance and broaden treatment benefits by informing the development of mechanism-targeted interventions. A particularly powerful network is the rich array of family processes linked to internalizing problems (e.g., parenting styles, parental mental health problems, and sibling relationships). Here, we propose a new theoretical model, the triadic model of family process, to organize theory and evidence around modifiable, transdiagnostic family factors that may contribute to youth internalizing problems. We describe the model's implications for intervention, and we propose strategies for testing the model in future research. The model provides a framework for studying associations among family processes, their relation to youth internalizing problems, and family-based strategies for strengthening prevention and treatment.

Community Report and Recommendations from International Lunar Exploration Working Group (ILEWG)

Science.gov (United States)

Foing, Bernard H.

2016-07-01

The International Lunar Exploration Working Group (ILEWG) was established in April 1995 at a meeting in Hamburg, Germany. As established in its charter, this working group reports to COSPAR and is charged with developing an international strategy for the exploration of the Moon. It discusses coordination between missions, and a road map for future international lunar exploration and utilisation. It fosters information exchange or potential and real future lunar robotic and human missions, as well as for new scientific and exploration information about the Moon. We refer to COSPAR and ILEWG ICEUM and lunar conferences and declarations [1-18], present the GLUC/ICEUM11 declaration and give a report on ongoing relevant ILEWG community activities. ILEWG supported community forums, ILEWG EuroMoonMars field campaigns and technology validation activities, as well as Young Lunar Explorers events, and activities with broad stakeholders. We discuss how lunar missions SMART-1, Kaguya, Chang'E1&2, Chandrayaan-1, LCROSS, LRO, GRAIL, LADEE, Chang'E3 and upcoming missions contribute to lunar exploration objectives & roadmap towards the Moon Village. GLUC/ICEUM11 declaration: "467 International Lunar Explorers, registered delegates from 26 countries, assembled at GLUC Global Lunar Conference including the 11th ILEWG Conference on Exploration and Utilisation of the Moon (ICEUM11) in Beijing. The conference engaged scientists, engineers, enthusiast explorers, agencies and organisations in the discussion of recent results and activities and the review of plans for exploration. Space agencies representatives gave the latest reports on their current lunar activities and programmes. GLUC-ICEUM11 was a truly historical meeting that demonstrated the world-wide interest in lunar exploration, discovery, and science. More than 400 abstracts were accepted for oral and poster presentations in the technical sessions, organised in 32 sessions within 4 symposia: Science and Exploration; Technology

Using an Altimeter-Derived Internal Tide Model to Remove Tides from in Situ Data

Science.gov (United States)

Zaron, Edward D.; Ray, Richard D.

2017-01-01

Internal waves at tidal frequencies, i.e., the internal tides, are a prominent source of variability in the ocean associated with significant vertical isopycnal displacements and currents. Because the isopycnal displacements are caused by ageostrophic dynamics, they contribute uncertainty to geostrophic transport inferred from vertical profiles in the ocean. Here it is demonstrated that a newly developed model of the main semidiurnal (M2) internal tide derived from satellite altimetry may be used to partially remove the tide from vertical profile data, as measured by the reduction of steric height variance inferred from the profiles. It is further demonstrated that the internal tide model can account for a component of the near-surface velocity as measured by drogued drifters. These comparisons represent a validation of the internal tide model using independent data and highlight its potential use in removing internal tide signals from in situ observations.

Workplace Bullying and Work Engagement: A Self-Determination Model.

Science.gov (United States)

Goodboy, Alan K; Martin, Matthew M; Bolkan, San

2017-06-01

This study modeled motivational mechanisms that explain the negative effects of workplace bullying on work engagement. Guided by self-determination theory, workplace bullying was predicted to decrease worker engagement indirectly, due to the denial of employees' basic psychological needs and their intrinsic motivation to work. From a sample of 243 full-time employees, serial multiple mediation models revealed that the indirect relationships between workplace bullying and work engagement (i.e., vigor, dedication, absorption) were serially mediated by basic psychological needs and intrinsic motivation to work. In support of self-determination theory, this study revealed that workplace bullying indirectly disengages employees from their work by denying them of their autonomy and relatedness needs and thwarting their motivation to perform work in a fulfilling way.

Internal Structural Design of the Common Research Model Wing Box for Aeroelastic Tailoring

Science.gov (United States)

Jutte, Christine V.; Stanford, Bret K.; Wieseman, Carol D.

2015-01-01

This work explores the use of alternative internal structural designs within a full-scale wing box structure for aeroelastic tailoring, with a focus on curvilinear spars, ribs, and stringers. The baseline wing model is a fully-populated, cantilevered wing box structure of the Common Research Model (CRM). Metrics of interest include the wing weight, the onset of dynamic flutter, and the static aeroelastic stresses. Twelve parametric studies alter the number of internal structural members along with their location, orientation, and curvature. Additional evaluation metrics are considered to identify design trends that lead to lighter-weight, aeroelastically stable wing designs. The best designs of the individual studies are compared and discussed, with a focus on weight reduction and flutter resistance. The largest weight reductions were obtained by removing the inner spar, and performance was maintained by shifting stringers forward and/or using curvilinear ribs: 5.6% weight reduction, a 13.9% improvement in flutter speed, but a 3.0% increase in stress levels. Flutter resistance was also maintained using straight-rotated ribs although the design had a 4.2% lower flutter speed than the curved ribs of similar weight and stress levels were higher. For some configurations, the differences between curved and straight ribs were smaller, which provides motivation for future optimization-based studies to fully exploit the trade-offs.

Internal combustion engines - Modelling, estimation and control issues

Energy Technology Data Exchange (ETDEWEB)

Vigild, C.W.

2001-12-01

validated on an engine dynamometer and engine data traces are presented. The successful application of the model based controllers is then the motivation behind the research in simplified engine modelling to be presented in this dissertation. One of the objectives of this dissertation is to propose a framework for simplified modelling of internal combustion engines and selected subcomponents. This has lead to the development of a new modeiling concept for Variable Geometry turbochargers, and a simplified Exhaust Gas Recirculation (EGR) model which can predict the temperature distribution along the exhaust gas recirculation system with unsteady flows. Furthermore, since engine combustion modelling often is carried out on a phenomenological level due to its complex nature, a new regression tool is developed which eases this modelling task. In the chapter concerning estimation, one of the most important findings is that EGR cannot be robustly controlled despite measurement of the air to fuel ratio in exhaust gas. The work closes with a presentation of a new estimation methodology which may supply a control strategy with an estimate of the actual control direction. The estimator is utilized in a control strategy which balances the intake mass flow of a twin-turbocharged V-engine. Since there exists a point of sign reversal in the VGT position-air mass flow characteristic, whose exact location is unknown, the control problem is posed with serious stability issues. These problems.have been solved with the new non-linear estimation methodology developed - a sign-reversal estimator. (au)

Determination of the internal exposure hazard from plutonium work in an open front hood

Science.gov (United States)

Olson, Cheryl Lynn

Work with hazardous substances, such as radioactive material, can be done safely when engineered controls are used to maintain the worker effective dose below the International Commission on Radiological Protection ICRP 60 recommendation of 0.02 Sv/year and reduce the worker exposure to material to as low as reasonably achievable (ALARA). A primary engineered control used at a Los Alamos National Laboratory facility is the open-front hood. An open-front hood, also known as an open-front box, is a laboratory containment box that is fully enclosed except for a 15-cm opening along the front of the box. This research involved collection of the aerosol escaping an open-front hood while PuO2 sample digestion was simulated. Sodium chloride was used as a surrogate to mimic the behavior of PuO2. The NaCl aerosol was binned as a function of median aerodynamic diameter using a Micro-orifice Uniform Deposit Impactor (MOUDI, MSP Corporation, Shoreview, MN) cascade impactor. Using neutron activation analysis (NAA) to measure the mass of material in each of the nine bins of the MOUDI, the mass median diameter of the escaping aerosol was determined. Using the mass median diameter and the total mass of the particle distribution, dose was calculated using ICRP 60 methodology. Experimental conditions mimicked a stationary worker and a worker moving her hands in and out of the open front hood. Measurements were also done in the hood for comparison. The effect of the hands moving in and out of the box was modeled. Information necessary for Computational Fluid Dynamics (CFD) modeling is given, such as volumetric flow rates out of the open front hood and into the experimental room, detailed sketches of the experimental set-up, and energy provided by the hot plate and worker. This research is unique as it measures particle size distribution from routine working conditions. Current research uses tracer gases or describes non-routine conditions. It is important to have results that mimic

The family working time model: Toward more gender equality in work and care

OpenAIRE

Müller, Kai-Uwe; Neumann, Michael; Wrohlich, Katharina

2016-01-01

Since the millennium, the labor market participation of women and mothers is increasing across European countries. Several work/care policy measures underlie this evolution. At the same time, the labor market behavior of men and fathers, as well as their involvement in care work, is relatively unchanging, meaning that employed mothers are facing an increased burden with respect to gainful employment and providing care. We propose a family working time model that incentivizes fathers and mothe...

Twenty-eighth Meeting of the Working Party on International Nuclear Data Evaluation Co-operation. Summary Record

International Nuclear Information System (INIS)

Chadwick, Mark; ); Danon, Yaron; Herman, Mike; ); Dunn, Mike; ); Kahler, Albert Skip; ); Jacqmin, Robert; ); Plompen, Arjan; ); Fukahori, Tokio; ); Harada, Hideo; ); Iwamoto, Osamu; Yokoyama, Kenji; ); Grudzevich, Oleg; ); Ge, Zhigang; Ruan, Xichao; Wu, Haicheng; Koning, Arjan; ); Mills, Robert; ); Mcnabb, Dennis; ); Palmiotti, Giuseppe; ); Noguere, Gilles; ); Leal, Luiz; ); Cabellos, Oscar; )

2016-01-01

The NEA's nuclear data evaluation co-operation activities involve the following evaluation projects: ENDF (United States), JENDL (Japan), ROSFOND/BROND (Russia), JEFF (other Data Bank member countries) and CENDL (China) in close co-operation with the Nuclear Data Section of the International Atomic Energy Agency (IAEA). The working party was established to promote the exchange of information on nuclear data evaluations, measurements, nuclear model calculations, validation, and related topics, and to provide a framework for cooperative activities between the participating projects. The working party assesses nuclear data improvement needs and addresses these needs by initiating joint evaluation and/or measurement efforts. The 28. Meeting of the WPEC was the occasion to review the experimental activities, the evaluation projects and the Status of subgroups. This document is the summary record of the meeting. It presents: 1 - The reports on experimental activities: Experimental nuclear data activities of relevance to the evaluation projects were reviewed. Detailed information about the experimental activities is given in the reports and view-graphs presented at the meeting. 2 - The review of final or near-final subgroup reports. Results and conclusions of completed or near-completed subgroups were discussed. A summary table of all subgroup status is given in Annex 3. 3 - The status of ongoing subgroups. Activities of ongoing subgroups were presented. A summary table of all subgroup status is given in Annex 3. 4 - The proposals for new subgroups. The subgroup proposal was reviewed by WPEC. Detailed information about this proposal is given in the document. 5 - The forthcoming meetings of interest. The documents presented at the twenty-eight WPEC meeting are presented in the annex 2: Annex 2.1 Working Party on International Nuclear Data Evaluation Co-operation - WPEC; Annex 2.2 WPEC Long-term mandate (updated and extended) on a 'Expert Group on the High Priority Request

A computational code for resolution of general compartment models applied to internal dosimetry

International Nuclear Information System (INIS)

Claro, Thiago R.; Todo, Alberto S.

2011-01-01

The dose resulting from internal contamination can be estimated with the use of biokinetic models combined with experimental results obtained from bio analysis and the knowledge of the incorporation time. The biokinetics models can be represented by a set of compartments expressing the transportation, retention and elimination of radionuclides from the body. The ICRP publications, number 66, 78 and 100, present compartmental models for the respiratory tract, gastrointestinal tract and for systemic distribution for an array of radionuclides of interest for the radiological protection. The objective of this work is to develop a computational code for designing, visualization and resolution of compartmental models of any nature. There are available four different techniques for the resolution of system of differential equations, including semi-analytical and numerical methods. The software was developed in C≠ programming, using a Microsoft Access database and XML standards for file exchange with other applications. Compartmental models for uranium, thorium and iodine radionuclides were generated for the validation of the CBT software. The models were subsequently solved by SSID software and the results compared with the values published in the issue 78 of ICRP. In all cases the system is in accordance with the values published by ICRP. (author)

A computational code for resolution of general compartment models applied to internal dosimetry

Energy Technology Data Exchange (ETDEWEB)

Claro, Thiago R.; Todo, Alberto S., E-mail: claro@usp.br, E-mail: astodo@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2011-07-01

The dose resulting from internal contamination can be estimated with the use of biokinetic models combined with experimental results obtained from bio analysis and the knowledge of the incorporation time. The biokinetics models can be represented by a set of compartments expressing the transportation, retention and elimination of radionuclides from the body. The ICRP publications, number 66, 78 and 100, present compartmental models for the respiratory tract, gastrointestinal tract and for systemic distribution for an array of radionuclides of interest for the radiological protection. The objective of this work is to develop a computational code for designing, visualization and resolution of compartmental models of any nature. There are available four different techniques for the resolution of system of differential equations, including semi-analytical and numerical methods. The software was developed in C{ne} programming, using a Microsoft Access database and XML standards for file exchange with other applications. Compartmental models for uranium, thorium and iodine radionuclides were generated for the validation of the CBT software. The models were subsequently solved by SSID software and the results compared with the values published in the issue 78 of ICRP. In all cases the system is in accordance with the values published by ICRP. (author)

A serial mediation model of workplace social support on work productivity: the role of self-stigma and job tenure self-efficacy in people with severe mental disorders.

Science.gov (United States)

Villotti, Patrizia; Corbière, Marc; Dewa, Carolyn S; Fraccaroli, Franco; Sultan-Taïeb, Hélène; Zaniboni, Sara; Lecomte, Tania

2017-09-12

Compared to groups with other disabilities, people with a severe mental illness face the greatest stigma and barriers to employment opportunities. This study contributes to the understanding of the relationship between workplace social support and work productivity in people with severe mental illness working in Social Enterprises by taking into account the mediating role of self-stigma and job tenure self-efficacy. A total of 170 individuals with a severe mental disorder employed in a Social Enterprise filled out questionnaires assessing personal and work-related variables at Phase-1 (baseline) and Phase-2 (6-month follow-up). Process modeling was used to test for serial mediation. In the Social Enterprise workplace, social support yields better perceptions of work productivity through lower levels of internalized stigma and higher confidence in facing job-related problems. When testing serial multiple mediations, the specific indirect effect of high workplace social support on work productivity through both low internalized stigma and high job tenure self-efficacy was significant with a point estimate of 1.01 (95% CI = 0.42, 2.28). Continued work in this area can provide guidance for organizations in the open labor market addressing the challenges posed by the work integration of people with severe mental illness. Implications for Rehabilitation: Work integration of people with severe mental disorders is difficult because of limited access to supportive and nondiscriminatory workplaces. Social enterprise represents an effective model for supporting people with severe mental disorders to integrate the labor market. In the social enterprise workplace, social support yields better perceptions of work productivity through lower levels of internalized stigma and higher confidence in facing job-related problems.

Analytical model of internally coupled ears

DEFF Research Database (Denmark)

Vossen, Christine; Christensen-Dalsgaard, Jakob; Leo van Hemmen, J

2010-01-01

Lizards and many birds possess a specialized hearing mechanism: internally coupled ears where the tympanic membranes connect through a large mouth cavity so that the vibrations of the tympanic membranes influence each other. This coupling enhances the phase differences and creates amplitude...... additionally provides the opportunity to incorporate the effect of the asymmetrically attached columella, which leads to the activation of higher membrane vibration modes. Incorporating this effect, the analytical model can explain measurements taken from the tympanic membrane of a living lizard, for example...

Modeling complex work systems - method meets reality

NARCIS (Netherlands)

van der Veer, Gerrit C.; Hoeve, Machteld; Lenting, Bert

1996-01-01

Modeling an existing task situation is often a first phase in the (re)design of information systems. For complex systems design, this model should consider both the people and the organization involved, the work, and situational aspects. Groupware Task Analysis (GTA) as part of a method for the

An extended gravity model with substitution applied to international trade

NARCIS (Netherlands)

Bikker, J.A.|info:eu-repo/dai/nl/06912261X

The traditional gravity model has been applied many times to international trade flows, especially in order to analyze trade creation and trade diversion. However, there are two fundamental objections to the model: it cannot describe substitutions between flows and it lacks a cogent theoretical

Environmental indicators and international models for making decision

International Nuclear Information System (INIS)

Polanco, Camilo

2006-01-01

The last international features proposed by the Organization for Economic Cooperation Development (OECD) and United Nations (UN) are analyzed in the use of the environmental indicators, in typology, selection criteria, and models, for organizing the information for management, environmental performance, and decision making. The advantages and disadvantages of each model are analyzed, as well as their environmental index characteristics. The analyzed models are Pressure - State - Response (PSR) and its conceptual developments: Driving Force - State Response (DSR), Driving Force - Pressure - State - Impact - Response (DPSIR), Model- Flow-Quality (MFQ), Pressure - State - Impact - Effect - Response (PSIER), and, finally, Pressure-State - Impact - Effect - Response - Management (PSIERM). The use of one or another model will depend on the quality of the available information, as well as on the proposed objectives

International studies on burnup credit criticality safety by an OECD/NEA working group

International Nuclear Information System (INIS)

Brady, M.C.; Okuno, H.; DeHart, M.D.; Nouri, A.; Sartori, E.

1998-01-01

The results and conclusions from a six-year study by an international benchmarking group in the comparison of computational methods for evaluating burnup credit in criticality safety analyses is presented. Approximately 20 participants from 12 countries have provided results for most problems. Four detailed benchmark problems for pressurized-water-reactor fuel have been completed. Results from work being finalized, addressing burnup credit for boiling-water-reactor fuel, are discussed, as well as planned activities for additional benchmarks, including mixed-oxide fuels, and other activities

The Effect of Job Characteristic, Welfare and Work Environment to Employee Performance at PT. Federal International Finance Manado

OpenAIRE

Walangitan, Mac Donald; Mandey, S. L.; Tulandi, Christy

2015-01-01

Job characteristic is the determinant of the fit between person with a particular line of work that explored. Welfare is the remuneration provided by the company based on the company rules. Work environment is physical and non-physical workplaces that have direct effect on employee. The purpose of this study is to determine the influence of job characteristic, welfare and work environment on employee performance at PT. Federal International Finance Manado. The population in the study is 65 e...

Generalized role for the cerebellum in encoding internal models: evidence from semantic processing.

Science.gov (United States)

Moberget, Torgeir; Gullesen, Eva Hilland; Andersson, Stein; Ivry, Richard B; Endestad, Tor

2014-02-19

The striking homogeneity of cerebellar microanatomy is strongly suggestive of a corresponding uniformity of function. Consequently, theoretical models of the cerebellum's role in motor control should offer important clues regarding cerebellar contributions to cognition. One such influential theory holds that the cerebellum encodes internal models, neural representations of the context-specific dynamic properties of an object, to facilitate predictive control when manipulating the object. The present study examined whether this theoretical construct can shed light on the contribution of the cerebellum to language processing. We reasoned that the cerebellum might perform a similar coordinative function when the context provided by the initial part of a sentence can be highly predictive of the end of the sentence. Using functional MRI in humans we tested two predictions derived from this hypothesis, building on previous neuroimaging studies of internal models in motor control. First, focal cerebellar activation-reflecting the operation of acquired internal models-should be enhanced when the linguistic context leads terminal words to be predictable. Second, more widespread activation should be observed when such predictions are violated, reflecting the processing of error signals that can be used to update internal models. Both predictions were confirmed, with predictability and prediction violations associated with increased blood oxygenation level-dependent signal in the posterior cerebellum (Crus I/II). Our results provide further evidence for cerebellar involvement in predictive language processing and suggest that the notion of cerebellar internal models may be extended to the language domain.

Daily spillover from family to work: A test of the work-home resources model.

Science.gov (United States)

Du, Danyang; Derks, Daantje; Bakker, Arnold B

2018-04-01

The present study examines a mediated moderation model of the day-level effects of family hassles and family-work spillover (affect and cognition) on the relationship between job resources and employees' flourishing at work. Based on the work-home resources model, the authors hypothesized that demands from one domain (family) induce repetitive thoughts or negative feelings about those problems, so that individuals are not able to function optimally and to make full use of contextual resources in the other domain (work). Multilevel analyses of 108 Chinese working parents' 366 daily surveys revealed that the relationship between morning job resources and afternoon flourishing was significantly positive when previous day family hassles were low; the relationship became nonsignificant when previous day family hassles were high. In addition, as predicted, daily rumination also attenuated the relationship between morning job resources and afternoon flourishing, whereas daily affect did not. Finally, the moderating effect of previous day family hassles was mediated by daily rumination. The findings contribute to spillover theories by revealing the roles of affective and cognitive spillover from family to work. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Modelling internal migration in Kenya: an econometric analysis with limited data.

Science.gov (United States)

Barber, G M; Milne, W J

1988-09-01

"In this paper the determinants of internal migration in Kenya are analyzed on the basis of a human capital model. Explanatory variables included in the specification are both economic (wage rates and employment rates) and noneconomic (for example, population density and educational attainment). Also incorporated are variables which reflect intervening opportunities.... The econometric results show that destination variables are important determinants of internal migration, as is distance between the districts. Further, the variables for the intervening opportunities add significantly to the explanatory power of the model." excerpt

Electrochemical-thermal modeling and microscale phase change for passive internal thermal management of lithium ion batteries.

Energy Technology Data Exchange (ETDEWEB)

Fuller, Thomas F. (Georgia Institute of Technology, Atlanta, GA); Bandhauer, Todd (Georgia Institute of Technology, Atlanta, GA); Garimella, Srinivas (Georgia Institute of Technology, Atlanta, GA)

2012-01-01

A fully coupled electrochemical and thermal model for lithium-ion batteries is developed to investigate the impact of different thermal management strategies on battery performance. In contrast to previous modeling efforts focused either exclusively on particle electrochemistry on the one hand or overall vehicle simulations on the other, the present work predicts local electrochemical reaction rates using temperature-dependent data on commercially available batteries designed for high rates (C/LiFePO{sub 4}) in a computationally efficient manner. Simulation results show that conventional external cooling systems for these batteries, which have a low composite thermal conductivity ({approx}1 W/m-K), cause either large temperature rises or internal temperature gradients. Thus, a novel, passive internal cooling system that uses heat removal through liquid-vapor phase change is developed. Although there have been prior investigations of phase change at the microscales, fluid flow at the conditions expected here is not well understood. A first-principles based cooling system performance model is developed and validated experimentally, and is integrated into the coupled electrochemical-thermal model for assessment of performance improvement relative to conventional thermal management strategies. The proposed cooling system passively removes heat almost isothermally with negligible thermal resistances between the heat source and cooling fluid. Thus, the minimization of peak temperatures and gradients within batteries allow increased power and energy densities unencumbered by thermal limitations.

Model of a Generic Natural Uranium Conversion Plant ? Suggested Measures to Strengthen International Safeguards

Energy Technology Data Exchange (ETDEWEB)

Raffo-Caiado, Ana Claudia [ORNL; Begovich, John M [ORNL; Ferrada, Juan J [ORNL

2009-11-01

This is the final report that closed a joint collaboration effort between DOE and the National Nuclear Energy Commission of Brazil (CNEN). In 2005, DOE and CNEN started a collaborative effort to evaluate measures that can strengthen the effectiveness of international safeguards at a natural uranium conversion plant (NUCP). The work was performed by DOE s Oak Ridge National Laboratory and CNEN. A generic model of a NUCP was developed and typical processing steps were defined. Advanced instrumentation and techniques for verification purposes were identified and investigated. The scope of the work was triggered by the International Atomic Energy Agency s 2003 revised policy concerning the starting point of safeguards at uranium conversion facilities. Prior to this policy only the final products of the uranium conversion plant were considered to be of composition and purity suitable for use in the nuclear fuel cycle and therefore, subject to the IAEA safeguards control. DOE and CNEN have explored options for implementing the IAEA policy, although Brazil understands that the new policy established by the IAEA is beyond the framework of the Quadripartite Agreement of which it is one of the parties, together with Argentina, the Brazilian-Argentine Agency for Accounting and Control of Nuclear Materials (ABACC) and the IAEA. Two technical papers on this subject were published at the 2005 and 2008 INMM Annual Meetings.

Models and methods for hot spot safety work

DEFF Research Database (Denmark)

Vistisen, Dorte

2002-01-01

Despite the fact that millions DKK each year are spent on improving roadsafety in Denmark, funds for traffic safety are limited. It is therefore vital to spend the resources as effectively as possible. This thesis is concerned with the area of traffic safety denoted "hot spot safety work", which...... is the task of improving road safety through alterations of the geometrical and environmental characteristics of the existing road network. The presently applied models and methods in hot spot safety work on the Danish road network were developed about two decades ago, when data was more limited and software...... and statistical methods less developed. The purpose of this thesis is to contribute to improving "State of the art" in Denmark. Basis for the systematic hot spot safety work are the models describing the variation in accident counts on the road network. In the thesis hierarchical models disaggregated on time...

Indicators of working capital management before and after the adoption of the international accounting standards in Brazil

Directory of Open Access Journals (Sweden)

Taís Duarte Silva

2016-08-01

Full Text Available The issues concerning the adoption of the international standards in Accounting have been frequently discussed, seeking to understand the possible impacts perceived in companies after the enactment of Law No. 11.638 / 2007. In this context, although appropriate working capital management is crucial to the life of organizations, few studies have been conducted. Thus, this study aimed to compare the indicators of working capital management before and after the adoption of the law, these being: Net Working Capital (NWC, Working Capital Requirement (WCR, Cash Balance (CB and Liquidity Ratio (LR. Therefore, a descriptive study was conducted using document analysis of financial statements with a quantitative approach. The study sample consisted of 35 economic sectors, calculating the indicators of all companies in these sectors for the period from 2004 till 2013, which permitted the comparison of a four-year period before and four years after the adoption of the international standards. In order to identify significant changes in the indicators, we used the nonparametric Mann-Whitney test. The results showed significant changes in the indicators NWC, CB and LR, without significant change in the WCR, which suggests that the financial assets and liabilities have undergone more changes than the operating assets and liabilities

Vibration behavior of PWR reactor internals Model experiments and analysis

International Nuclear Information System (INIS)

Assedo, R.; Dubourg, M.; Livolant, M.; Epstein, A.

1975-01-01

In the late 1971, the CEA and FRAMATOME decided to undertake a comprehensive joint program of studying the vibration behavior of PWR internals of the 900 MWe, 50 cycle, 3 loop reactor series being built by FRAMATOME in France. The PWR reactor internals are submitted to several sources of excitation during normal operation. Two main sources of excitation may effect the internals behavior: the large flow turbulences which could generate various instabilities such as: vortex shedding: the pump pressure fluctuations which could generate acoustic noise in the circuit at frequencies corresponding to shaft speed frequencies or blade passing frequencies, and their respective harmonics. The flow induced vibrations are of complex nature and the approach selected, for this comprehensive program, is semi-empirical and based on both theoretical analysis and experiments on a reduced scale model and full scale internals. The experimental support of this program consists of: the SAFRAN test loop which consists of an hydroelastic similitude of a 1/8 scale model of a PWR; harmonic vibration tests in air performed on full scale reactor internals in the manufacturing shop; the GENNEVILLIERS facilities which is a full flow test facility of primary pump; the measurements carried out during start up on the Tihange reactor. This program will be completed in April 1975. The results of this program, the originality of which consists of studying separately the effects of random excitations and acoustic noises, on the internals behavior, and by establishing a comparison between experiments and analysis, will bring a major contribution for explaining the complex vibration phenomena occurring in a PWR

Assessing the risk of work-related international travel.

Science.gov (United States)

Druckman, Myles; Harber, Philip; Liu, Yihang; Quigley, Robert L

2014-11-01

To identify factors affecting the likelihood of requiring medical services during international business trips. Data from more than 800,000 international trips and medical assistance cases provided to 48 multinational corporations in 2009. Travel destination countries were grouped into four a priori risk-related categories. Travel to "low" medical risk countries in aggregate accounted for more hospitalizations and medical evacuations than travel to "high" medical risk countries. Nevertheless, the risk per trip was much higher for travel to higher medical risk countries. Corporations with employees on international travel should allocate sufficient resources to manage and ideally prevent medical issues during business travel. Travel medicine must focus on more than infectious diseases, and programs are necessary for both high- and low-risk regions. Improved understanding of travel-related needs determines resource allocation and risk mitigation efforts.

Conceptual Models, Choices, and Benchmarks for Building Quality Work Cultures.

Science.gov (United States)

Acker-Hocevar, Michele

1996-01-01

The two models in Florida's Educational Quality Benchmark System represent a new way of thinking about developing schools' work culture. The Quality Performance System Model identifies nine dimensions of work within a quality system. The Change Process Model provides a theoretical framework for changing existing beliefs, attitudes, and behaviors…

2nd International Conference on Rheology and Modeling of Materials (IC-RMM2)

International Nuclear Information System (INIS)

2017-01-01

Understanding the rheological properties of materials and their rheological behaviors during their manufacturing processes and in their applications in many cases can help to increase the efficiency and competitiveness not only of the finished goods and products but the organizations and societies also. The more scientific supported and prepared organizations develop more competitive products with better thermal, mechanical, physical, chemical and biological properties and the leading companies apply more competitive equipment and technology processes. The aims of the 2 nd International Conference on Rheology and Modeling of Materials (ic-rmm2) and the parallel organized symposiums of the 1 st International Symposium on Powder Injection Molding (is-pim1) and the 1 st International Symposium on Rheology and Fracture of Solids (is-rfs1) are the followings: Promote new methods and results of scientific research in the fields of modeling and measurements of rheological properties and behavior of materials under processing and applications; Change information between the theoretical and applied sciences as well as technical and technological implantations. Promote the communication and collaboration between the scientists, researchers and engineers of different disciplines, different nations, countries and continents. The international conference ic-rmm2 and symposiums of is-pim1 and is-rfs1 provide a platform among the leading international scientists, researchers, PhD students and engineers for discussing recent achievements in measurement, modeling and application of rheology in materials technology and materials science of liquids, melts, solids, crystals and amorphous structures. Among thr major fields of interest are the influence of materials structures, mechanical stresses, temperatures, deformation speeds and shear rates on rheological and physical properties, phase transformation of foams, foods, polymers, plastics and other competitive materials like ceramics

2nd International Conference on Rheology and Modeling of Materials (IC-RMM2)

Science.gov (United States)

2017-01-01

Understanding the rheological properties of materials and their rheological behaviors during their manufacturing processes and in their applications in many cases can help to increase the efficiency and competitiveness not only of the finished goods and products but the organizations and societies also. The more scientific supported and prepared organizations develop more competitive products with better thermal, mechanical, physical, chemical and biological properties and the leading companies apply more competitive equipment and technology processes. The aims of the 2nd International Conference on Rheology and Modeling of Materials (ic-rmm2) and the parallel organized symposiums of the 1st International Symposium on Powder Injection Molding (is-pim1) and the 1st International Symposium on Rheology and Fracture of Solids (is-rfs1) are the followings: Promote new methods and results of scientific research in the fields of modeling and measurements of rheological properties and behavior of materials under processing and applications; Change information between the theoretical and applied sciences as well as technical and technological implantations. Promote the communication and collaboration between the scientists, researchers and engineers of different disciplines, different nations, countries and continents. The international conference ic-rmm2 and symposiums of is-pim1 and is-rfs1 provide a platform among the leading international scientists, researchers, PhD students and engineers for discussing recent achievements in measurement, modeling and application of rheology in materials technology and materials science of liquids, melts, solids, crystals and amorphous structures. Among thr major fields of interest are the influence of materials structures, mechanical stresses, temperatures, deformation speeds and shear rates on rheological and physical properties, phase transformation of foams, foods, polymers, plastics and other competitive materials like ceramics

Three Models of International Entrepreneurship – An Eclectic Meta-Theoretical Overview

DEFF Research Database (Denmark)

Rask, Morten; Servais, Per

The aim of this article is to provide a comprehensive review of models used to depict infant firms that operate internationally right from or close to inception, so-called international new ventures (INVs) or born global firms that emerged in the literature in the early 1990s up until today...

Principal component analysis acceleration of rovibrational coarse-grain models for internal energy excitation and dissociation

Science.gov (United States)

Bellemans, Aurélie; Parente, Alessandro; Magin, Thierry

2018-04-01

The present work introduces a novel approach for obtaining reduced chemistry representations of large kinetic mechanisms in strong non-equilibrium conditions. The need for accurate reduced-order models arises from compression of large ab initio quantum chemistry databases for their use in fluid codes. The method presented in this paper builds on existing physics-based strategies and proposes a new approach based on the combination of a simple coarse grain model with Principal Component Analysis (PCA). The internal energy levels of the chemical species are regrouped in distinct energy groups with a uniform lumping technique. Following the philosophy of machine learning, PCA is applied on the training data provided by the coarse grain model to find an optimally reduced representation of the full kinetic mechanism. Compared to recently published complex lumping strategies, no expert judgment is required before the application of PCA. In this work, we will demonstrate the benefits of the combined approach, stressing its simplicity, reliability, and accuracy. The technique is demonstrated by reducing the complex quantum N2(g+1Σ) -N(S4u ) database for studying molecular dissociation and excitation in strong non-equilibrium. Starting from detailed kinetics, an accurate reduced model is developed and used to study non-equilibrium properties of the N2(g+1Σ) -N(S4u ) system in shock relaxation simulations.

A conceptual-practice model for occupational therapy to facilitate return to work in breast cancer patients.

Science.gov (United States)

Désiron, Huguette A M; Donceel, Peter; de Rijk, Angelique; Van Hoof, Elke

2013-12-01

Improved therapies and early detection have significantly increased the number of breast cancers survivors, leading to increasing needs regarding return to work (RTW). Occupational therapy (OT) interventions provide successful RTW assistance for other conditions, but are not validated in breast cancer. This paper aims to identify a theoretical framework for OT intervention by questioning how OT models can be used in OT interventions in RTW of breast cancer patients; criteria to be used to select these models and adaptations that would be necessary to match the OT model(s) to breast cancer patients' needs? Using research specific criteria derived from OT literature (conceptual OT-model, multidisciplinary, referring to the International Classification of functioning (ICF), RTW in breast cancer) a search in 9 electronic databases was conducted to select articles that describe conceptual OT models. A content analysis of those models complying to at least two of the selection criteria was realised. Checking for breast cancer specific issues, results were matched with literature of care-models regarding RTW in breast cancer. From the nine models initially identified, three [Canadian Model of Occupational Performance, Model of Human Occupation (MOHO), Person-Environment-Occupation-Performance model] were selected based on the selection criteria. The MOHO had the highest compliance rate with the criteria. To enhance usability in breast cancer, some adaptations are needed. No OT model to facilitate RTW in breast cancer could be identified, indicating a need to fill this gap. Individual and societal needs of breast cancer patients can be answered by using a MOHO-based OT model, extended with indications for better treatment, work-outcomes and longitudinal process factors.

Reflections on the international climate change negotiations: A synthesis of a working group on carbon emission policy and regulation in Brazil

International Nuclear Information System (INIS)

Lucon, Oswaldo; Romeiro, Viviane; Pacca, Sergio

2013-01-01

This short communication presents a synthesis of a Working Group on Carbon Emission Policy and Regulation held at the University of Sao Paulo, in Brazil. The document looked at the problems with the international negotiations, the options for Brazil as it attempts to control emissions, and ways to leverage the mitigation process. Several options are currently being proposed, but these are neither clear in order to support a solid polycentric approach with adequate metrics, nor a robust international coordination and a sound scientific communication. Brazil has a central role in this process, for having successful initiatives on renewable energy and deforestation control. Its leadership can demonstrate how such policies might take shape. However, the country´s future is uncertain in terms of low carbon development. Although the country is still well positioned among BRICS to find practical solutions to the stalemate in international cooperation, several internal challenges need to be harmonized. - Highlights: • The work presents results of a recent climate change mitigation policies workshop. • It assesses Brazil's potential role in shaping future policies and negotiations. • Policies are evaluated based on domestic and international effects. • Suggests how Brazil's national effort could leverage the international processes

{sup 131}I-SPGP internal dosimetry: animal model and human extrapolation

Energy Technology Data Exchange (ETDEWEB)

Andrade, Henrique Martins de; Ferreira, Andrea Vidal; Soprani, Juliana; Santos, Raquel Gouvea dos [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN-CNEN-MG), Belo Horizonte, MG (Brazil)], e-mail: hma@cdtn.br; Figueiredo, Suely Gomes de [Universidade Federal do Espirito Santo, (UFES), Vitoria, ES (Brazil). Dept. de Ciencias Fisiologicas. Lab. de Quimica de Proteinas

2009-07-01

Scorpaena plumieri is commonly called moreia-ati or manganga and is the most venomous and one of the most abundant fish species of the Brazilian coast. Soprani 2006, demonstrated that SPGP - an isolated protein from S. plumieri fish- possess high antitumoral activity against malignant tumours and can be a source of template molecules for the development (design) of antitumoral drugs. In the present work, Soprani's {sup 125}ISPGP biokinetic data were treated by MIRD formalism to perform Internal Dosimetry studies. Absorbed doses due to the {sup 131}I-SPGP uptake were determinate in several organs of mice, as well as in the implanted tumor. Doses obtained for animal model were extrapolated to humans assuming a similar ratio for various mouse and human tissues. For the extrapolation, it was used human organ masses from Cristy/Eckerman phantom. Both penetrating and non-penetrating radiation from {sup 131}I were considered. (author)

Value Creation in International Business

DEFF Research Database (Denmark)

is a pioneering two volume work intended to provoke theoretical and empirical development in International Business research. Moreover, it is intended as a bridge between concepts derived from general business firm-level research agendas such as value creation and business model, and internationalization......The edited collection brings into focus the meanings, interpretations and the process of value creation in international business. Exploring value creation in the context of emerging and developed economies, Volume 2 takes the perspective of small and medium sized enterprises and examines various...

3rd International Conference on Modelling and Management of Engineering Processes

CERN Document Server

Gericke, Kilian; Szélig, Nikoletta; Vajna, Sándor

2015-01-01

Innovative processes for the development of products and services are more and more considered as an organisational capability, which is recognised to be increasingly important for business success in today’s competitive environment. However, management and academia need a more profound understanding of these processes in order to develop improved management approaches to exploit business potentials. This book contains the proceedings of the 3rd International Conference on Modelling and Management of Engineering Processes (MMEP2013) held in Magdeburg, Germany, in November 2013. It includes contributions from international leading researchers in the fields of process modelling and process management. The conference topics were recent trends in modelling and management of engineering processes, potential synergies between different modelling approaches, future challenges for the management of engineering processes as well as future research in these areas.

Development of uncertainty-based work injury model using Bayesian structural equation modelling.

Science.gov (United States)

Chatterjee, Snehamoy

2014-01-01

This paper proposed a Bayesian method-based structural equation model (SEM) of miners' work injury for an underground coal mine in India. The environmental and behavioural variables for work injury were identified and causal relationships were developed. For Bayesian modelling, prior distributions of SEM parameters are necessary to develop the model. In this paper, two approaches were adopted to obtain prior distribution for factor loading parameters and structural parameters of SEM. In the first approach, the prior distributions were considered as a fixed distribution function with specific parameter values, whereas, in the second approach, prior distributions of the parameters were generated from experts' opinions. The posterior distributions of these parameters were obtained by applying Bayesian rule. The Markov Chain Monte Carlo sampling in the form Gibbs sampling was applied for sampling from the posterior distribution. The results revealed that all coefficients of structural and measurement model parameters are statistically significant in experts' opinion-based priors, whereas, two coefficients are not statistically significant when fixed prior-based distributions are applied. The error statistics reveals that Bayesian structural model provides reasonably good fit of work injury with high coefficient of determination (0.91) and less mean squared error as compared to traditional SEM.

Motivation to Improve Work through Learning: A Conceptual Model

Directory of Open Access Journals (Sweden)

Kueh Hua Ng

2014-12-01

Full Text Available This study aims to enhance our current understanding of the transfer of training by proposing a conceptual model that supports the mediating role of motivation to improve work through learning about the relationship between social support and the transfer of training. The examination of motivation to improve work through motivation to improve work through a learning construct offers a holistic view pertaining to a learner's profile in a workplace setting, which emphasizes learning for the improvement of work performance. The proposed conceptual model is expected to benefit human resource development theory building, as well as field practitioners by emphasizing the motivational aspects crucial for successful transfer of training.

“Stories from No-Man’s Land?” Situated language learning through the use of role models in the context of international Higher Education

NARCIS (Netherlands)

Haines, Kevin

2012-01-01

This article discusses the value of role models in the language acquisition process of international students following an English as Medium of Instruction (EMI) programme in the Netherlands. Narrative interpretations of qualitative data provide insights into the identity work involved in the use of

Working together for global health goals: The United States Agency for International Development and faith-based organizations

Directory of Open Access Journals (Sweden)

Clydette L Powell

2014-01-01

Full Text Available For many years, and before the term “FBO” was used for faith-based organizations, the United States Agency for International Development (USAID has supported the work of FBOs in global health and development. The Agency has long recognized the impact of FBOs within that development space, because these organizations are often well positioned to reach the hard-to-reach and to go the last mile because of their strong ties to the community. Moreover, FBOs deliver a substantial percentage of the health services in some developing countries. Faith partners, whether Catholic, Protestant, Buddhist, Hindu, Muslim, or other, have an important role to play as implementers in global health and to support global efforts towards achieving the Millennium Development Goals (MDGs in health. In addition, partnerships at national and international levels are key to the success of US Presidential Initiatives in the developing world, such as President’s Emergency Plan for AIDS Relief (PEPFAR and President’s Malaria Initiative (PMI. FBOs also have an important voice in policy and strategy formulation. Among other international donors, USAID support has been of great importance to the work of FBOs, thereby helping host nations to achieve goals in ending preventable child and maternal deaths, improving communicable disease control and prevention, and by supporting the construction and renovation of hospitals and health facilities where service delivery is most needed. The development literature is replete with examples of the work of FBOs made possible through access to resources. This paper focuses on some of the work supported by USAID in global health initiatives in order to reach complementary goals and achieve significant public health advances. Given the vastness of the topic, not all the global health initiatives involving FBOs supported by USAID are included here; the reader is encouraged to access the USAID website and USAID implementing partners for

76 FR 61255 - Airworthiness Directives; Honeywell International Inc. TPE331 Model Turboprop Engines With...

Science.gov (United States)

2011-10-04

... Certification Office, FAA, Atlanta Aircraft Certification Office, 1701 Columbia Avenue, College Park, GA 30337... Airworthiness Directives; Honeywell International Inc. TPE331 Model Turboprop Engines With Certain Dixie... Honeywell International Inc. TPE331 model turboprop engines with a part manufacturer approval (PMA...

Maximizing time from the constraining European Working Time Directive (EWTD): The Heidelberg New Working Time Model.

Science.gov (United States)

Schimmack, Simon; Hinz, Ulf; Wagner, Andreas; Schmidt, Thomas; Strothmann, Hendrik; Büchler, Markus W; Schmitz-Winnenthal, Hubertus

2014-01-01

The introduction of the European Working Time Directive (EWTD) has greatly reduced training hours of surgical residents, which translates into 30% less surgical and clinical experience. Such a dramatic drop in attendance has serious implications such compromised quality of medical care. As the surgical department of the University of Heidelberg, our goal was to establish a model that was compliant with the EWTD while avoiding reduction in quality of patient care and surgical training. We first performed workload analyses and performance statistics for all working areas of our department (operation theater, emergency room, specialized consultations, surgical wards and on-call duties) using personal interviews, time cards, medical documentation software as well as data of the financial- and personnel-controlling sector of our administration. Using that information, we specifically designed an EWTD-compatible work model and implemented it. Surgical wards and operating rooms (ORs) were not compliant with the EWTD. Between 5 pm and 8 pm, three ORs were still operating two-thirds of the time. By creating an extended work shift (7:30 am-7:30 pm), we effectively reduced the workload to less than 49% from 4 pm and 8 am, allowing the combination of an eight-hour working day with a 16-hour on call duty; thus, maximizing surgical resident training and ensuring patient continuity of care while maintaining EDTW guidelines. A precise workload analysis is the key to success. The Heidelberg New Working Time Model provides a legal model, which, by avoiding rotating work shifts, assures quality of patient care and surgical training.

Burnout syndrome during residency in internal medicine and pediatrics in a country without working time directive.

Science.gov (United States)

Aksoy, Duygu Yazgan; Durusu Tanriover, Mine; Unal, Sule; Dizdar, Omer; Kalyoncu, Umut; Karakaya, Jale; Unal, Serhat; Kale, Gulsev

2014-01-01

The purpose of this paper is to demonstrate burnout syndrome among internal medicine and pediatrics residents in a country that does not have the working time directive (WTD) and also to determine the risk factors and consequent impact on efficient functioning in clinical areas. A 57-item questionnaire was given to internal medicine and pediatrics residents. Responses from 22 pediatrics and 33 internal medicine residents were evaluated. Demographic findings, burnout scores, having hobbies, social activities and reading books unrelated to medicine were similar between the two groups. Six pediatrics residents (27.3 per cent) and 11 (33.3 per cent) internal medicine residents met the criteria for clinically significant burnout. Personal accomplishment scores and reading books unrelated to medicine were found to be related to burnout. Burnout is a syndrome characterized by depersonalization, emotional exhaustion and a low sense of personal accomplishment. It is important to document burnout in countries where WTDs are not implemented. Further studies might demonstrate burnout's effect on patient safety, service quality and physician's performance.

Online Internal Temperature Estimation for Lithium-Ion Batteries Based on Kalman Filter

OpenAIRE

Jinlei Sun; Guo Wei; Lei Pei; Rengui Lu; Kai Song; Chao Wu; Chunbo Zhu

2015-01-01

The battery internal temperature estimation is important for the thermal safety in applications, because the internal temperature is hard to measure directly. In this work, an online internal temperature estimation method based on a simplified thermal model using a Kalman filter is proposed. As an improvement, the influences of entropy change and overpotential on heat generation are analyzed quantitatively. The model parameters are identified through a current pulse test. The charge/discharg...

Development of a working Hovercraft model

Science.gov (United States)

Noor, S. H. Mohamed; Syam, K.; Jaafar, A. A.; Mohamad Sharif, M. F.; Ghazali, M. R.; Ibrahim, W. I.; Atan, M. F.

2016-02-01

This paper presents the development process to fabricate a working hovercraft model. The purpose of this study is to design and investigate of a fully functional hovercraft, based on the studies that had been done. The different designs of hovercraft model had been made and tested but only one of the models is presented in this paper. In this thesis, the weight, the thrust, the lift and the drag force of the model had been measured and the electrical and mechanical parts are also presented. The processing unit of this model is Arduino Uno by using the PSP2 (Playstation 2) as the controller. Since our prototype should be functioning on all kind of earth surface, our model also had been tested in different floor condition. They include water, grass, cement and tile. The Speed of the model is measured in every case as the respond variable, Current (I) as the manipulated variable and Voltage (V) as the constant variable.

Evolution of chemical specifications following the working group of international inter-comparison

International Nuclear Information System (INIS)

Leduc-Brunet, Murielle; Gressier, F.; Mole, D.; Massias, O.; Marescot, O.; Bretelle, Jean Luc

2012-09-01

As part of a continuous improvement process and the inclusion of Experience Feedback, EDF has launched a working group to analyse its reference of Chemical Specifications with regard to the guidelines of EPRI and VGB.. As a result of the analysis of over 1000 lines of specifications, a large number of recommendations were issued, referring either to control of new chemical parameters or to an enhancement of measurement frequencies. These recommendations are to be developed by preliminary studies which will provide supporting evidence for future decisions. To implement these recommendations, EDF launched a dedicated project in 2011, whose main objectives were to: - raise the requirements of chemical specifications in line with international standards and compare the technical basis of the different international standards, - strengthen monitoring and anticipation of corrective actions in the field of plant chemistry with a view to extending nuclear plant lifetime to 60 years. This project, scheduled for 2011 to 2016, covers the following activities: - studies on the technical background of the specifications (2011-14), - study of the possibility of adopting an 'Actions Levels' approach in EDF's own specifications (2012-14), - new propositions evolution of the specifications (2015-16). (authors)

Evaluation of potential toxicity from co-exposure to three CNS depressants (toluene, ethylbenzene, and xylene) under resting and working conditions using PBPK modeling.

Science.gov (United States)

Dennison, James E; Bigelow, Philip L; Mumtaz, Moiz M; Andersen, Melvin E; Dobrev, Ivan D; Yang, Raymond S H

2005-03-01

Under OSHA and American Conference of Governmental Industrial Hygienists (ACGIH) guidelines, the mixture formula (unity calculation) provides a method for evaluating exposures to mixtures of chemicals that cause similar toxicities. According to the formula, if exposures are reduced in proportion to the number of chemicals and their respective exposure limits, the overall exposure is acceptable. This approach assumes that responses are additive, which is not the case when pharmacokinetic interactions occur. To determine the validity of the additivity assumption, we performed unity calculations for a variety of exposures to toluene, ethylbenzene, and/or xylene using the concentration of each chemical in blood in the calculation instead of the inhaled concentration. The blood concentrations were predicted using a validated physiologically based pharmacokinetic (PBPK) model to allow exploration of a variety of exposure scenarios. In addition, the Occupational Safety and Health Administration and ACGIH occupational exposure limits were largely based on studies of humans or animals that were resting during exposure. The PBPK model was also used to determine the increased concentration of chemicals in the blood when employees were exercising or performing manual work. At rest, a modest overexposure occurs due to pharmacokinetic interactions when exposure is equal to levels where a unity calculation is 1.0 based on threshold limit values (TLVs). Under work load, however, internal exposure was 87%higher than provided by the TLVs. When exposures were controlled by a unity calculation based on permissible exposure limits (PELs), internal exposure was 2.9 and 4.6 times the exposures at the TLVs at rest and workload, respectively. If exposure was equal to PELs outright, internal exposure was 12.5 and 16 times the exposure at the TLVs at rest and workload, respectively. These analyses indicate the importance of (1) selecting appropriate exposure limits, (2) performing unity

Expatriates' Multiple Fears, from Terrorism to Working Conditions: Development of a Model.

Science.gov (United States)

Giorgi, Gabriele; Montani, Francesco; Fiz-Perez, Javier; Arcangeli, Giulio; Mucci, Nicola

2016-01-01

Companies' internationalization appears to be fundamental in the current globalized and competitive environment and seems important not only for organizational success, but also for societal development and sustainability. On one hand, global business increases the demand for managers for international assignment. On the other hand, emergent fears, such as terrorism, seem to be developing around the world, enhancing the risk of expatriates' potential health problems. The purpose of this paper is to examine the relationships between the emergent concept of fear of expatriation with further workplace fears (economic crisis and dangerous working conditions) and with mental health problems. The study uses a quantitative design. Self-reported data were collected from 265 Italian expatriate workers assigned to both Italian and worldwide projects. Structural equation model analyses showed that fear of expatriation mediates the relationship of mental health with fear of economic crisis and with perceived dangerous working conditions. As expected, in addition to fear, worries of expatriation are also related to further fears. Although, the study is based on self-reports and the cross-sectional study design limits the possibility of making causal inferences, the new constructs introduced add to previous research.

Expatriates’ Multiple Fears, from Terrorism to Working Conditions: Development of a Model

Science.gov (United States)

Giorgi, Gabriele; Montani, Francesco; Fiz-Perez, Javier; Arcangeli, Giulio; Mucci, Nicola

2016-01-01

Companies’ internationalization appears to be fundamental in the current globalized and competitive environment and seems important not only for organizational success, but also for societal development and sustainability. On one hand, global business increases the demand for managers for international assignment. On the other hand, emergent fears, such as terrorism, seem to be developing around the world, enhancing the risk of expatriates’ potential health problems. The purpose of this paper is to examine the relationships between the emergent concept of fear of expatriation with further workplace fears (economic crisis and dangerous working conditions) and with mental health problems. The study uses a quantitative design. Self-reported data were collected from 265 Italian expatriate workers assigned to both Italian and worldwide projects. Structural equation model analyses showed that fear of expatriation mediates the relationship of mental health with fear of economic crisis and with perceived dangerous working conditions. As expected, in addition to fear, worries of expatriation are also related to further fears. Although, the study is based on self-reports and the cross-sectional study design limits the possibility of making causal inferences, the new constructs introduced add to previous research. PMID:27790173

A novel model for extending international co-operation in science and education

NARCIS (Netherlands)

de Boer, S.J.; Ji-zehn, Q.

2004-01-01

Journal of Zhejiang University SCIENCE (ISSN 1009-3095, Monthly) 2004 Vol. 5 No. 3 p.358-364 --------------------------------------------------------------------------------A novel model for extending international co-operation in science and educationDE BOER Sirp J.1, QIU Ji-zhen 2(1International

Work orientations in the job demands-resources model

NARCIS (Netherlands)

Demerouti, E.; Bakker, A.B.; Fried, Y.

2012-01-01

Purpose – This study aims to examine the role of instrumental vs intrinsic work orientations in the job demands-resources (JD-R) model. Design/methodology – Using a sample of 123 employees, the authors investigated longitudinally whether an instrumental work orientation moderates the motivational

Search Results | Page 852 | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 8511 - 8519 of 8519 ... Shainoor is Managing Director of Better Business Enterprise Ltd, a consulting firm operating internationally, working with multiple stakeholders to identify opportunities using technology and innovative business models to build capacity and scale. Profile.

Consequences of Work-Family Conflict: Testing a New Model of Work-Related, Non-Work-Related and Sress-Related Outcomes

OpenAIRE

Esson, Patrice L.

2004-01-01

With the demographic layout of the workplace changing constantly, as more women enter the workforce, and as new organizational hiring practices lead to more diversity in the work environment, both researchers and employers have become increasingly interested in understanding the consequences of work-family conflict. Work-family conflict affects the individuals suffering from it, their families, and their employers. Thus, it is important to have a robust and comprehensive causal model that exp...

Macroeconomic modelling of international carbon tax regimes

International Nuclear Information System (INIS)

Hall, S.; Mabey, N.; Smith, Clare

1994-01-01

An econometric model of fossil fuel demand has been estimated for eight OECD countries, relating coal, oil and gas demands to GDP and prices. In addition, for five of these countries, a model of endogenous technical progress has been estimated, representing the decline in energy intensity as a function of price and macroeconomic variables. This aims to include both price induced innovation in energy and structural change in the economy as long term determinants of energy consumption. A number of possible international carbon/energy tax agreements are simulated, showing the impacts on carbon dioxide emissions and comparing the two models. It is shown that the endogenous technical change model does include an important element that is missed in the more conventional approach. However in the long run the magnitude of taxes required to stabilise or reduce emissions would be large, and it is suggested that other non-price policies will become more important. (Author)

The politics of agenda setting at the global level: key informant interviews regarding the International Labour Organization Decent Work Agenda.

Science.gov (United States)

Di Ruggiero, Erica; Cohen, Joanna E; Cole, Donald C

2014-07-01

Global labour markets continue to undergo significant transformations resulting from socio-political instability combined with rises in structural inequality, employment insecurity, and poor working conditions. Confronted by these challenges, global institutions are providing policy guidance to protect and promote the health and well-being of workers. This article provides an account of how the International Labour Organization's Decent Work Agenda contributes to the work policy agendas of the World Health Organization and the World Bank. This qualitative study involved semi-structured interviews with representatives from three global institutions--the International Labour Organization (ILO), the World Health Organization and the World Bank. Of the 25 key informants invited to participate, 16 took part in the study. Analysis for key themes was followed by interpretation using selected agenda setting theories. Interviews indicated that through the Decent Work Agenda, the International Labour Organization is shaping the global policy narrative about work among UN agencies, and that the pursuit of decent work and the Agenda were perceived as important goals with the potential to promote just policies. The Agenda was closely linked to the World Health Organization's conception of health as a human right. However, decent work was consistently identified by World Bank informants as ILO terminology in contrast to terms such as job creation and job access. The limited evidence base and its conceptual nature were offered as partial explanations for why the Agenda has yet to fully influence other global institutions. Catalytic events such as the economic crisis were identified as creating the enabling conditions to influence global work policy agendas. Our evidence aids our understanding of how an issue like decent work enters and stays on the policy agendas of global institutions, using the Decent Work Agenda as an illustrative example. Catalytic events and policy

The politics of agenda setting at the global level: key informant interviews regarding the International Labour Organization Decent Work Agenda

Science.gov (United States)

2014-01-01

Background Global labour markets continue to undergo significant transformations resulting from socio-political instability combined with rises in structural inequality, employment insecurity, and poor working conditions. Confronted by these challenges, global institutions are providing policy guidance to protect and promote the health and well-being of workers. This article provides an account of how the International Labour Organization’s Decent Work Agenda contributes to the work policy agendas of the World Health Organization and the World Bank. Methods This qualitative study involved semi-structured interviews with representatives from three global institutions – the International Labour Organization (ILO), the World Health Organization and the World Bank. Of the 25 key informants invited to participate, 16 took part in the study. Analysis for key themes was followed by interpretation using selected agenda setting theories. Results Interviews indicated that through the Decent Work Agenda, the International Labour Organization is shaping the global policy narrative about work among UN agencies, and that the pursuit of decent work and the Agenda were perceived as important goals with the potential to promote just policies. The Agenda was closely linked to the World Health Organization’s conception of health as a human right. However, decent work was consistently identified by World Bank informants as ILO terminology in contrast to terms such as job creation and job access. The limited evidence base and its conceptual nature were offered as partial explanations for why the Agenda has yet to fully influence other global institutions. Catalytic events such as the economic crisis were identified as creating the enabling conditions to influence global work policy agendas. Conclusions Our evidence aids our understanding of how an issue like decent work enters and stays on the policy agendas of global institutions, using the Decent Work Agenda as an illustrative

Working group report: Flavor physics and model building

Indian Academy of Sciences (India)

cO Indian Academy of Sciences. Vol. ... This is the report of flavor physics and model building working group at ... those in model building have been primarily devoted to neutrino physics. ..... [12] Andrei Gritsan, ICHEP 2004, Beijing, China.

First year engineering students: Perceptions of engineers and engineering work amongst domestic and international students

Directory of Open Access Journals (Sweden)

Dawn Bennett

2015-03-01

Full Text Available Despite being well ahead of many other disciplines in establishing strong and evidence-based research and practice, engineering in many countries still experiences high rates of student and graduate attrition. One possible reason for this is that students enter engineering study without understanding the realities of either their degree program or engineering work, and without a sense of motivation and commitment. The research reported here aimed to extend understanding of first year engineering students’ thinking about their competencies, identity, self-efficacy, motivation, and career. The study involved over 1,100 first year engineering students enrolled in a common first year unit. Responses were coded using the Engineers Australia graduate competencies as a framework, and this paper reports findings from the most diverse cohort of students (n=260, of whom 49% were international students with English as their second language. The research identified differences between international and domestic students’ perceptions of self and of career competencies, possibly related to self-esteem. Implications include improved confidence and motivation to learn as students consider their strengths, interests and goals. Further, the research raises the need for analysis of international students’ cultural and educational background to determine how different cohorts of international students self-appraise and how they associate learning with their future careers.

Caring for health-care workers. Experience with a psychological support program for nurses working in Internal Medicine

Directory of Open Access Journals (Sweden)

Elena Albertazzi

2012-01-01

Full Text Available IntroductionNurses working in an Internal Medicine ward must have very specific training and aptitude. Dealing with different types of patients with widely varying ages and different medical issues requires flexibility in managing emergencies and in choosing between various professional interventions, as well as strong communication skills. Because of this variety, the workload is perceived as being particularly heavy.Materials and methodsThe article describes the intervention of a psychologist in support of the nursing staff of an Internal Medicine ward. The intervention was prompted by findings of high staff turnover. The work began with an analysis of the group dynamics in the nursing team, and the psychologist's action was based on a group approach. In this way, specific problems of the group were solved through the instrument of the group itself, which became the true promoter of change.ResultsNurses worked to recognize their professional identity and to strengthen their self-esteem, and this changed their perception of their workload. The team also became more aware of its individual and group resources. These changes decreased staff turnover and reduced arguments between the nurses themselves and between the nurses and patients’ relatives.DiscussionThe nursing team become more solid and better organized. It dealt with emotional problems and has become more receptive to changes in the way the work is organized.

Windows® Internals

CERN Document Server

Russinovich, Mark E; Ionescu, Alex

2009-01-01

See how the core components of the Windows operating system work behind the scenes-guided by a team of internationally renowned internals experts. Fully updated for Windows Server 2008 and Windows Vista, this classic guide delivers key architectural insights on system design, debugging, performance, and support-along with hands-on experiments to experience Windows internal behavior firsthand.Delve inside Windows architecture and internals:Understand how the core system and management mechanisms work-from the object manager to services to the registryExplore internal system data structures usin

International Digital Elevation Model Service (IDEMS): A Revived IAG Service

Science.gov (United States)

Kelly, K. M.; Hirt, C., , Dr; Kuhn, M.; Barzaghi, R.

2017-12-01

A newly developed International Digital Elevation Model Service (IDEMS) is now available under the umbrella of the International Gravity Field Service of the International Association of Geodesy. Hosted and operated by Environmental Systems Research Institute (Esri) (http://www.esri.com/), the new IDEMS website is available at: https://idems.maps.arcgis.com/home/index.html. IDEMS provides a focus for distribution of data and information about various digital elevation models, including spherical-harmonic models of Earth's global topography and lunar and planetary DEM. Related datasets, such as representation of inland water within DEMs, and relevant software which are available in the public domain are also provided. Currently, IDEMS serves as repository of links to providers of global terrain and bathymetry, terrain related Earth models and datasets such as digital elevation data services managed and maintained by Esri (Terrain and TopoBathy), Bedmap2-Ice thickness and subglacial topographic model of Antarctica and Ice, Cloud, and Land Elevation ICESat/GLAS Data, as well as planetary terrain data provided by PDS Geosciences Node at Washington University, St. Louis. These services provide online access to a collection of multi-resolution and multi-source elevation and bathymetry data, including metadata and source information. In addition to IDEMS current holdings of terrestrial and planetary DEMs, some topography related products IDEMS may include in future are: dynamic ocean topography, 3D crustal density models, Earth's dynamic topography, etc. IDEMS may also consider terrain related products such as quality assessments, global terrain corrections, global height anomaly-to-geoid height corrections and other geodesy-relevant studies and products. IDEMS encourages contributions to the site from the geodetic community in any of the product types listed above. Please contact the authors if you would like to contribute or recommend content you think appropriate for

Resource allocation models of auditory working memory.

Science.gov (United States)

Joseph, Sabine; Teki, Sundeep; Kumar, Sukhbinder; Husain, Masud; Griffiths, Timothy D

2016-06-01

Auditory working memory (WM) is the cognitive faculty that allows us to actively hold and manipulate sounds in mind over short periods of time. We develop here a particular perspective on WM for non-verbal, auditory objects as well as for time based on the consideration of possible parallels to visual WM. In vision, there has been a vigorous debate on whether WM capacity is limited to a fixed number of items or whether it represents a limited resource that can be allocated flexibly across items. Resource allocation models predict that the precision with which an item is represented decreases as a function of total number of items maintained in WM because a limited resource is shared among stored objects. We consider here auditory work on sequentially presented objects of different pitch as well as time intervals from the perspective of dynamic resource allocation. We consider whether the working memory resource might be determined by perceptual features such as pitch or timbre, or bound objects comprising multiple features, and we speculate on brain substrates for these behavioural models. This article is part of a Special Issue entitled SI: Auditory working memory. Copyright © 2016 Elsevier B.V. All rights reserved.

MOHAWC. Models of human activities in work contexts

International Nuclear Information System (INIS)

Brehmer, B.; Andersen, H.B.

1993-06-01

The overall objective of the MOHAWC Action is to formulate and extend a unifying framework for cognitive studies of human agents coping with complex work domains. Central issues are methods for analysis and representation of knowledge about complex domains, analysis of cognitive control, mental models and heuristics applied in complex work domains, distributed decision making and forms of cooperative work, the role of tacit knowledge in agents' performance in complex work domains, and cognitive simulation methods for testing models of cognitive performance. The nature of computer mediated work and how such work should be designed and organised to be optimally effective and satisfying is considered. The focus is mainly on various forms of process industry, such as nuclear power and steel production. Dynamic decision making, where the decision-maker has to make a series of interdependent decisions under conditions where the state of the system with which he or she is working changes, both as a consequence of the decision maker's actions and autonomously, and where the decisions must be made in real time is analysed. MOHAWC taxonomy has played a central role as a framework for identifying important research problems and for integrating results. The Risoe team has contributed a major analysis of and illustration of how the MOHAWC taxonomy can be used in the design of interfaces. (AB) (97 refs.)

Twelfth annual meeting of the International Working Group on Fast Reactors. Summary report. Part I

Energy Technology Data Exchange (ETDEWEB)

NONE

1979-05-01

The Twelfth Annual Meeting of the IWGFR was held in accordance with the recommendation of the previous AGM,in Vienna from 27 to 30 March 1979. The meeting was attended by the Member States of the group: France, the Federal Republic of Germany, Italy, Japan, the United Kingdom, and the USA, as well as by representatives from CEC, IAEA and OECD and observer from the USSR. This document includes: review of the IWGFR Activities for the period since the Eleventh Annual Meeting of the Group; preliminary programme of international conference on breeder reactors as a world energy resource and the breeder fuel cycle; list of meetings on atomic energy which may be of interest to the IWGFR Members; IWGFR criteria for supporting some of the international conferences; list of proposed topics for the IWGFR Specialists' Meetings; list of topics for review articles on LMFBR recommended for publication by the IAEA; list of meetings sponsored by the IWGFR; a list of members of the International Working Group on Fast Reactors.

Twelfth annual meeting of the International Working Group on Fast Reactors. Summary report. Part I

International Nuclear Information System (INIS)

1979-05-01

The Twelfth Annual Meeting of the IWGFR was held in accordance with the recommendation of the previous AGM,in Vienna from 27 to 30 March 1979. The meeting was attended by the Member States of the group: France, the Federal Republic of Germany, Italy, Japan, the United Kingdom, and the USA, as well as by representatives from CEC, IAEA and OECD and observer from the USSR. This document includes: review of the IWGFR Activities for the period since the Eleventh Annual Meeting of the Group; preliminary programme of international conference on breeder reactors as a world energy resource and the breeder fuel cycle; list of meetings on atomic energy which may be of interest to the IWGFR Members; IWGFR criteria for supporting some of the international conferences; list of proposed topics for the IWGFR Specialists' Meetings; list of topics for review articles on LMFBR recommended for publication by the IAEA; list of meetings sponsored by the IWGFR; a list of members of the International Working Group on Fast Reactors

Adoptive parenting and attachment: association of the internal working models between adoptive mothers and their late-adopted children during adolescence.

Science.gov (United States)

Pace, Cecilia S; Di Folco, Simona; Guerriero, Viviana; Santona, Alessandra; Terrone, Grazia

2015-01-01

Recent literature has shown that the good outcome of adoption would mostly depend on the quality of adoptive parenting, which is strongly associated with the security of parental internal working models (IWMs) of attachment. Specifically, attachment states-of-mind of adoptive mothers classified as free and autonomous and without lack of resolution of loss or trauma could represent a good protective factor for adopted children, previously maltreated and neglected. While most research on adoptive families focused on pre-school and school-aged children, the aim of this study was to assess the concordance of IWMs of attachment in adoptive dyads during adolescence. Our pilot-study involved 76 participants: 30 adoptive mothers (mean age = 51.5 ± 4.3), and their 46 late-adopted adolescents (mean age = 13.9 ± 1.6), who were all aged 4-9 years old at time of adoption (mean age = 6.3 ± 1.5). Attachment representations of adopted adolescents were assessed by the Friend and Family Interview (FFI), while adoptive mothers' state-of-mind with respect to attachment was classified by the Adult Attachment Interview (AAI). Adolescents' verbal intelligence was controlled for. Late-adopted adolescents were classified as follows: 67% secure, 26% dismissing, and 7% preoccupied in the FFI, while their adoptive mothers' AAI classifications were 70% free-autonomous, 7% dismissing, and 23% unresolved. We found a significant concordance of 70% (32 dyads) between the secure-insecure FFI and AAI classifications. Specifically adoptive mothers with high coherence of transcript and low unresolved loss tend to have late-adopted children with high secure attachment, even if the adolescents' verbal intelligence made a significant contribution to this prediction. Our results provides an empirical contribution to the literature concerning the concordance of attachment in adoptive dyads, highlighting the beneficial impact of highly coherent states-of-mind of adoptive mothers on the attachment

Search Results | Page 852 | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 8511 - 8518 of 8518 ... Shainoor Khoja. Shainoor is Managing Director of Better Business Enterprise Ltd, a consulting firm operating internationally, working with multiple stakeholders to identify opportunities using technology and innovative business models to build capacity and scale. Profile.

Search Results | Page 853 | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 8521 - 8530 of 8531 ... Shainoor Khoja. Shainoor is Managing Director of Better Business Enterprise Ltd, a consulting firm operating internationally, working with multiple stakeholders to identify opportunities using technology and innovative business models to build capacity and scale. Profile.

Global Forest Rights Action Research | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

How can such rights and benefits be distributed equitably within communities? ... strengthened livelihoods through improved forest management;; partnership ... Enhancing the Action Research Capacity of the International Model Forest Network ... by bringing research findings, mainly from earlier IDRC-supported work, into ...

Search Results | Page 852 | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 8511 - 8520 of 8522 ... Shainoor Khoja. Shainoor is Managing Director of Better Business Enterprise Ltd, a consulting firm operating internationally, working with multiple stakeholders to identify opportunities using technology and innovative business models to build capacity and scale. Profile.

Child Passenger Safety Training for Pediatric Interns: Does it Work?

Science.gov (United States)

Morrissey, Dina; Riese, Alison; Violano, Pina; Lapidus, Garry; Baird, Janette; Mello, Michael J

2016-03-01

Evaluate the efficacy of a child passenger safety (CPS) educational intervention on the CPS-related knowledge, attitude and anticipatory guidance behaviors of pediatric interns. All subjects were surveyed at baseline and 6 months. Intervention interns attended a CPS training module which included viewing an educational video, observing a car seat inspection appointment, hands-on practice and completion of a post-intervention survey. All 16 intervention interns completed the initial survey, the intervention and the immediate-post questionnaire. Thirteen (81%) completed the 6-month follow-up. The baseline survey was completed by 27/40 (67%) of control interns, 28/40 (70%) submitted a follow-up. The proportion of intervention interns who self-reported giving CPS guidance at all well-child visits increased by 31.3% (95% CI 6.1,56.5%); the control group had no change. Similar results were seen with self-reported knowledge and attitude. A CPS training module increases pediatric interns' knowledge, improves attitudes, and self-reported behaviors regarding CPS-related anticipatory guidance.

Adaptive filters and internal models: multilevel description of cerebellar function.

Science.gov (United States)

Porrill, John; Dean, Paul; Anderson, Sean R

2013-11-01

Cerebellar function is increasingly discussed in terms of engineering schemes for motor control and signal processing that involve internal models. To address the relation between the cerebellum and internal models, we adopt the chip metaphor that has been used to represent the combination of a homogeneous cerebellar cortical microcircuit with individual microzones having unique external connections. This metaphor indicates that identifying the function of a particular cerebellar chip requires knowledge of both the general microcircuit algorithm and the chip's individual connections. Here we use a popular candidate algorithm as embodied in the adaptive filter, which learns to decorrelate its inputs from a reference ('teaching', 'error') signal. This algorithm is computationally powerful enough to be used in a very wide variety of engineering applications. However, the crucial issue is whether the external connectivity required by such applications can be implemented biologically. We argue that some applications appear to be in principle biologically implausible: these include the Smith predictor and Kalman filter (for state estimation), and the feedback-error-learning scheme for adaptive inverse control. However, even for plausible schemes, such as forward models for noise cancellation and novelty-detection, and the recurrent architecture for adaptive inverse control, there is unlikely to be a simple mapping between microzone function and internal model structure. This initial analysis suggests that cerebellar involvement in particular behaviours is therefore unlikely to have a neat classification into categories such as 'forward model'. It is more likely that cerebellar microzones learn a task-specific adaptive-filter operation which combines a number of signal-processing roles. Copyright © 2012 Elsevier Ltd. All rights reserved.

Meta-analysis of the research impact of Baddeley’s multicomponent working memory model and Cowan’s embedded-processes model of working memory : a bibliometric mapping approach

OpenAIRE

Gruszka-Gosiewska, Aleksandra; Orzechowski, Jarosław

2016-01-01

In this study bibliometric mapping method was employed to visualise the current research trends and the impact of the two most influential models of working memory, namely: A. D. Baddeley and G. J. Hitch’s (1974) multicomponent working memory model and N. Cowan’s (1988) embedded-processes model of working memory. Using VOSviewer software two maps were generated based on the index-term words extracted from the research papers citing Baddeley (2000) and Cowan (2001), respectively. The maps repr...

Internal Dosimetric Calculations for Occupationally Exposed Workers

International Nuclear Information System (INIS)

Hussein, M.T.; Farag, H.I.

2005-01-01

The Internal radiation dosimetry calculations are very important to estimate the benefit and the risk of radiation in nuclear medicine field for both patient and worker. MIRD scheme and ICRP model have valid methods in this type of calculations. In this work, a new program called WIRDST the Workers Internal Radiation Dosimetry Simulation for Thyroid gland has been built up by using the Monte Carlo (MC) method to simulate the internal exposure of sodium iodide by inhalation for workers. The working conditions have been taken as the same as found in the hot laboratory of nuclear medicine unit in the National Cancer Institute in Cairo University. The point source equivalent model as a parameterization equation has developed newly by using the fitting model of MC method for uniform distribution of radioactive sodium iodide in the thyroid gland. This model is used for the first time in this type of calculation, and then applied on 3 D coordinates of mathematical geometry for the adult phantom of the reference man. The latest parameters (anatomical data and inhalation metabolic data) of ICRP pamphlets and recommendations have been used in this purpose. Moreover, the latest scheme for iodine decay mode and the latest geometry model for thyroid gland are used also. The results showed that the specific effective energy and the effective dose decrease from the thyroid gland to the nearest organs then decrease gradually until terminated in the organs that have large distance from the thyroid. The Annual Limit of Intake (ALI) has been calculated for a wide range of thyroid uptake (5%, 15%, 25%, 35%, 45%, and 55%) in addition to change of the working time order per week in one year. The results showed that the critical point of intake limits are decreased when the thyroid uptake is increased and/or the number of working time in the hot laboratory per week is increased

Engine modeling and control modeling and electronic management of internal combustion engines

CERN Document Server

Isermann, Rolf

2014-01-01

The increasing demands for internal combustion engines with regard to fuel consumption, emissions and driveability lead to more actuators, sensors and complex control functions. A systematic implementation of the electronic control systems requires mathematical models from basic design through simulation to calibration. The book treats physically-based as well as models based experimentally on test benches for gasoline (spark ignition) and diesel (compression ignition) engines and uses them for the design of the different control functions. The main topics are: - Development steps for engine control - Stationary and dynamic experimental modeling - Physical models of intake, combustion, mechanical system, turbocharger, exhaust, cooling, lubrication, drive train - Engine control structures, hardware, software, actuators, sensors, fuel supply, injection system, camshaft - Engine control methods, static and dynamic feedforward and feedback control, calibration and optimization, HiL, RCP, control software developm...

{sup 131}I-CRTX internal dosimetry: animal model and human extrapolation

Energy Technology Data Exchange (ETDEWEB)

Andrade, Henrique Martins de; Ferreira, Andrea Vidal; Soares, Marcella Araugio; Silveira, Marina Bicalho; Santos, Raquel Gouvea dos [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN-CNEN-MG), Belo Horizonte, MG (Brazil)], e-mail: hma@cdtn.br

2009-07-01

Snake venoms molecules have been shown to play a role not only in the survival and proliferation of tumor cells but also in the processes of tumor cell adhesion, migration and angiogenesis. {sup 125}I-Crtx, a radiolabeled version of a peptide derived from Crotalus durissus terrificus snake venom, specifically binds to tumor and triggers apoptotic signalling. At the present work, {sup 125}I-Crtx biokinetic data (evaluated in mice bearing Erlich tumor) were treated by MIRD formalism to perform Internal Dosimetry studies. Doses in several organs of mice were determinate, as well as in implanted tumor, for {sup 131}I-Crtx. Doses results obtained for animal model were extrapolated to humans assuming a similar concentration ratio among various tissues between mouse and human. In the extrapolation, it was used human organ masses from Cristy/Eckerman phantom. Both penetrating and non-penetrating radiation from {sup 131}I in the tissue were considered in dose calculations. (author)

Student experiences of the PhD cohort model: Working within or ...

African Journals Online (AJOL)

The Collaborative Cohort Model (CCM) of higher degrees supervision is gaining increasing popularity internationally and, in some contexts, replacing the conventional Apprentice Master Model (AMM). Among the motivations advanced for this shift is that the CCM improves completion rates and enhances the quality of ...

Analysis and modelling of power modulation experiments in JET plasmas with internal transport barriers

Energy Technology Data Exchange (ETDEWEB)

Marinoni, A [Politecnico di Milano, dipartimento di Ingegneria Nucleare, Milano (Italy); Mantica, P [Istituto di Fisica del Plasma, Euratom-ENEA-CNR Association, Milan (Italy); Eester, D Van [LPP-ERM/KMS, Association EURATOM-Belgian State, TEC, B-1000 Brussels (Belgium); Imbeaux, F [Association EURATOM-CEA, CEA/DSM/DRFC, CEA Cadarache, 13108 Saint Paul lez Durance (France); Mantsinen, M [Helsinki University of Technology, Association Euratom-Tekes, PO Box 2200 (Finland); Hawkes, N [Euratom-UKAEA Fusion Association, Culham Science Centre, Abingdon, Oxon (United Kingdom); Joffrin, E [Association EURATOM-CEA, CEA/DSM/DRFC, CEA Cadarache, 13108 Saint Paul lez Durance (France); Kiptily, V [Euratom-UKAEA Fusion Association, Culham Science Centre, Abingdon, Oxon (United Kingdom); Pinches, S D [Max Plank Institut fur Plasmaphysik, Euratom Association, Garching (Germany); Salmi, A [Helsinki University of Technology, Association Euratom-Tekes, PO Box 2200 (Finland); Sharapov, S [Euratom-UKAEA Fusion Association, Culham Science Centre, Abingdon, Oxon (United Kingdom); Voitsekhovitch, I [Euratom-UKAEA Fusion Association, Culham Science Centre, Abingdon, Oxon (United Kingdom); Vries, P de [FOM Institut voor Plasmafysica, Association Euratom-FOM, Nieuwegein, The (Netherlands); Zastrow, K D [Euratom-UKAEA Fusion Association, Culham Science Centre, Abingdon, Oxon (United Kingdom)

2006-10-15

Understanding the physics of internal transport barriers (ITBs) is a crucial issue in developing ITER relevant advanced tokamak scenarios. To gain new information on ITBs, RF power modulation experiments, mainly devoted to the study of electron heat transport through ITBs, have been performed on the JET tokamak. The main physics results have been reported in [1]. The present paper describes in detail the data analysis and numerical modelling work carried out for the interpretation of the experiments. ITBs located in the negative shear region behave as localized insulating layers able to stop the heat wave propagation, thus implying that the ITB is a region of low diffusivity characterized by a loss of stiffness. Various sources of spurious effects affecting the interpretation of the results are analysed and discussed. First principle based models have so far failed to predict the temperature profile in the first place, which prevented their application to modulation results, while empirical transport models have been set up and reproduce the major part of the data.

International Oil Supplies and Demands

International Nuclear Information System (INIS)

1991-09-01

The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--90 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world's dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group's thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence

International Oil Supplies and Demands

International Nuclear Information System (INIS)

1992-04-01

The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--1990 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world's dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group's thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence

International Oil Supplies and Demands

Energy Technology Data Exchange (ETDEWEB)

1991-09-01

The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--90 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world's dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group's thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence.

International Oil Supplies and Demands

Energy Technology Data Exchange (ETDEWEB)

1992-04-01

The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--1990 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world's dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group's thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence.

Methods of Work of the International Nuclear Data Committee (This Document Supersedes INDC-1/G of August 1971.)

International Nuclear Information System (INIS)

1972-09-01

Under the Terms of Reference of the International Nuclear Data Committee (INDC) , hereinafter referred to as the Committee, approved by the Director General of the IAEA in October 1967, the Committee is authorized to determine its own Methods of Work, including preparation of its agenda, establishment of working groups, keeping of records and other procedures. The Committee will have the dual purpose of serving as a means of promoting international cooperation in all phases of nuclear data activity of general usefulness to nuclear energy programmes, and of advising the Director General of the IAEA in this field. The Committee shall be concerned with the collection, exchange and dissemination of basic nuclear data generally relevant to nuclear energy programmes, with the various aspects of measurements and interpretation of nuclear cross sections and other nuclear constants, and the instrumentation and techniques related thereto.

International Monetary Policy Coordination in a New Keynesian Model with NICE Features

Science.gov (United States)

Poutineau, Jean-Christophe; Vermandel, Gauthier

2018-01-01

The authors provide a static two-country new Keynesian model to teach two related questions in international macroeconomics: the international transmission of unilateral monetary policy decisions and the gains coming from the coordination monetary rules. They concentrate on "normal times" and use a thoroughly graphical approach to…

Proceedings of the 17. IASTED international conference on modelling and simulation

Energy Technology Data Exchange (ETDEWEB)

Wamkeue, R. (comp.) [Quebec Univ., Abitibi-Temiscaminque, PQ (Canada)

2006-07-01

The International Association of Science and Technology for Development (IASTED) hosted this conference to provide a forum for international researchers and practitioners interested in all areas of modelling and simulation. The conference featured 12 sessions entitled: (1) automation, control and robotics, (2) hydraulic and hydrologic modelling, (3) applications in processes and design optimization, (4) environmental systems, (5) biomedicine and biomechanics, (6) communications, computers and informatics 1, (7) economics, management and operations research 1, (8) modelling and simulation methodologies 1, (9) economics, management and operations research 2, (10) modelling, optimization, identification and simulation, (11) communications, computers and informatics 2, and, (12) modelling and simulation methodologies 2. Participants took the opportunity to present the latest research, results, and ideas in mathematical modelling; physically-based modelling; agent-based modelling; dynamic modelling; 3-dimensional modelling; computational geometry; time series analysis; finite element methods; discrete event simulation; web-based simulation; Monte Carlo simulation; simulation optimization; simulation uncertainty; fuzzy systems; data modelling; computer aided design; and, visualization. Case studies in engineering design were also presented along with simulation tools and languages. The conference also highlighted topical issues in environmental systems modelling such as air modelling and simulation, atmospheric modelling, hazardous materials, mobile source emissions, ecosystem modelling, hydrological modelling, aquatic ecosystems, terrestrial ecosystems, biological systems, agricultural modelling, terrain analysis, meteorological modelling, earth system modelling, climatic modelling, and natural resource management. The conference featured 110 presentations, of which 3 have been catalogued separately for inclusion in this database. refs., tabs., figs.

The international hydrocoin project. Groundwater hydrology modelling strategies for performance assessment of nuclear waste disposal

International Nuclear Information System (INIS)

1990-01-01

The international co-operation project HYDROCOIN for studying groundwater flow modelling in the context of radioactive waste disposal was initiated in 1984. Thirteen organizations from ten countries and two international organizations have participated in the project which has been managed by the Swedish Nuclear Power Inspectorate, SKI. This report summarizes the results from the second phase of HYDROCOIN, Level 2, which has addressed the issue of validation by testing the capabilities of groundwater flow models to describe five field and laboratory experiments: . Thermal convection and conduction around a field heat transfer experiment in a quarry, . A laboratory experiment with thermal convection as a model for variable density flow, . A small groundwater flow system in fractured monzonitic gneiss, . Three-dimensional regional groundwater flow in low permeability rocks, and . Soil water redistribution near the surface at a field site. The five test cases cover various media of interest for final disposal such as low permeability saturated rock, unsaturated rock, and salt formations. They also represent a variety of spatial and temporal scales. From model simulations on the five test cases conclusions are drawn regarding the applicability of the models to the experimental and field situations and the usefulness of the available data bases. The results are evaluated with regard to the steps in an ideal validation process. The data bases showed certain limitations for validation purposes with respect to independent data sets for calibration and validation. In spite of this, the HYDROCOIN Level 2 efforts have significantly contributed to an increased confidence in the applicability of groundwater flow models to different situations relevant to final disposal. Furthermore, the work has given much insight into the validation process and specific recommendations for further validation efforts are made

A numerical study of internal brick stresses in AGR moderator bricks

Energy Technology Data Exchange (ETDEWEB)

McNally, K., E-mail: kevin.mcnally@hsl.gsi.gov.uk [Health and Safety Laboratory, Harpur Hill, Buxton, Derbyshire SK17 9JN (United Kingdom); Fahad, M. [NGRG, School of MACE, University of Manchester, Manchester M13 9PL (United Kingdom); Tan, E.; Warren, N. [Health and Safety Laboratory, Harpur Hill, Buxton, Derbyshire SK17 9JN (United Kingdom); Hall, G.N.; Marsden, B.J. [NGRG, School of MACE, University of Manchester, Manchester M13 9PL (United Kingdom)

2016-12-01

Highlights: • A methodology for studying the uncertainty in internal brick stresses was developed. • A computationally efficient methodology based upon a surrogate model was utilised. • Uncertainty in material relationships, particularly those related to secondary creep was the dominant source of uncertainty. - Abstract: Physically-based models are often used to model changes in geometry and the associated stress fields of graphite moderator bricks within an advanced gas-cooled reactor (AGR). These models require inputs that describe the loading conditions, and coded relationships describing the behaviour of material properties. Material relationships are primarily based upon data obtained from inspection campaigns at operating reactors. However, the data from trepanning campaigns do not provide information on some of the key relationships and parameters that affect the internal stresses generated within the moderator bricks. In this work we explore how uncertain material property relationships affect the internal brick stresses in early- and late-life. We describe two computer experiments designed to study early- and late-life brick stresses and report the results from global sensitivity analysis of the models. The work makes use of an emulator, a surrogate for the FE model, in order to make the sensitivity analyses computationally feasible.

A numerical study of internal brick stresses in AGR moderator bricks

International Nuclear Information System (INIS)

McNally, K.; Fahad, M.; Tan, E.; Warren, N.; Hall, G.N.; Marsden, B.J.

2016-01-01

Highlights: • A methodology for studying the uncertainty in internal brick stresses was developed. • A computationally efficient methodology based upon a surrogate model was utilised. • Uncertainty in material relationships, particularly those related to secondary creep was the dominant source of uncertainty. - Abstract: Physically-based models are often used to model changes in geometry and the associated stress fields of graphite moderator bricks within an advanced gas-cooled reactor (AGR). These models require inputs that describe the loading conditions, and coded relationships describing the behaviour of material properties. Material relationships are primarily based upon data obtained from inspection campaigns at operating reactors. However, the data from trepanning campaigns do not provide information on some of the key relationships and parameters that affect the internal stresses generated within the moderator bricks. In this work we explore how uncertain material property relationships affect the internal brick stresses in early- and late-life. We describe two computer experiments designed to study early- and late-life brick stresses and report the results from global sensitivity analysis of the models. The work makes use of an emulator, a surrogate for the FE model, in order to make the sensitivity analyses computationally feasible.

The International hydrocoin project. Groundwater hydrology modelling strategies for performance assessment of nuclear waste disposal. Summary report

International Nuclear Information System (INIS)

1992-01-01

In 1984 the Swedish Nuclear Power Inspectorate, SKI, initiated the international cooperation project HYDROCOIN for the study of groundwater flow modelling in the context of radioactive waste disposal. The objective of HYDROCOIN was to improve knowledge of the influence of various strategies for groundwater flow modelling for the safety assessment of final repositories for radioactive wastes. The study comprised: the impact on the groundwater flow calculations of different solution algorithms, the capabilities of different models to describe field tests and bench-scale experiments, and the impact on the groundwater flow calculations of incorporating various physical phenomena. The work was conducted at three levels addressing code verification (Level 1), model validation (Level 2), and sensitivity and uncertainty analysis of groundwater flow calculations (Level 3). This report gives an overview and summary of test cases of HYDROCOIN Level 1, the issue of validation groundwater flow models (HYDROCOIN Level 2), the methodologies used in uncertainty and sensitivity analysis (HYDROCOIN Level 3). 108 figs., 24 tabs., 2 appendices

FFTF scale-model characterization of flow-induced vibrational response of reactor internals

International Nuclear Information System (INIS)

Ryan, J.A.; Julyk, L.J.

1977-01-01

As an integral part of the Fast Test Reactor Vibration Program for Reactor Internals, the flow-induced vibrational characteristics of scaled Fast Test Reactor core internal and peripheral components were assessed under scaled and simulated prototype flow conditions in the Hydraulic Core Mockup. The Hydraulic Core Mockup, a 0.285 geometric scale model, was designed to model the vibrational and hydraulic characteristics of the Fast Test Reactor. Model component vibrational characteristics were measured and determined over a range of 36 percent to 111 percent of the scaled prototype design flow. Selected model and prototype components were shaker tested to establish modal characteristics. The dynamic response of the Hydraulic Core Mockup components exhibited no anomalous flow-rate dependent or modal characteristics, and prototype response predictions were adjudged acceptable

FFTF scale-model characterization of flow induced vibrational response of reactor internals

Energy Technology Data Exchange (ETDEWEB)

Ryan, J A; Julyk, L J [Hanford Engineering Development Laboratory, Richland, WA (United States)

1977-12-01

As an integral part of the Fast Test Reactor Vibration Program for Reactor Internals, the flow-induced vibrational characteristics of scaled Fast Test Reactor core internal and peripheral components were assessed under scaled and simulated prototype flow conditions in the Hydraulic Core Mockup. The Hydraulic Core Mockup, a 0.285 geometric scale model, was designed to model the vibrational and hydraulic characteristics of the Fast Test Reactor. Model component vibrational characteristics were measured and determined over a range of 36% to 111% of the scaled prototype design flow. Selected model and prototype components were shaker tested to establish modal characteristics. The dynamic response of the Hydraulic Core Mockup components exhibited no anomalous flow-rate dependent or modal characteristics, and prototype response predictions were adjudged acceptable. (author)

FFTF scale-model characterization of flow induced vibrational response of reactor internals

International Nuclear Information System (INIS)

Ryan, J.A.; Julyk, L.J.

1977-01-01

As an integral part of the Fast Test Reactor Vibration Program for Reactor Internals, the flow-induced vibrational characteristics of scaled Fast Test Reactor core internal and peripheral components were assessed under scaled and simulated prototype flow conditions in the Hydraulic Core Mockup. The Hydraulic Core Mockup, a 0.285 geometric scale model, was designed to model the vibrational and hydraulic characteristics of the Fast Test Reactor. Model component vibrational characteristics were measured and determined over a range of 36% to 111% of the scaled prototype design flow. Selected model and prototype components were shaker tested to establish modal characteristics. The dynamic response of the Hydraulic Core Mockup components exhibited no anomalous flow-rate dependent or modal characteristics, and prototype response predictions were adjudged acceptable. (author)

A Conceptual Model of the World of Work.

Science.gov (United States)

VanRooy, William H.

The conceptual model described in this paper resulted from the need to organize a body of knowledge related to the world of work which would enable curriculum developers to prepare accurate, realistic instructional materials. The world of work is described by applying Malinowski's scientific study of the structural components of culture. It is…

Teaching mathematical modelling through project work

DEFF Research Database (Denmark)

Blomhøj, Morten; Kjeldsen, Tinne Hoff

2006-01-01

are reported in manners suitable for internet publication for colleagues. The reports and the related discussions reveal interesting dilemmas concerning the teaching of mathematical modelling and how to cope with these through “setting the scene” for the students modelling projects and through dialogues......The paper presents and analyses experiences from developing and running an in-service course in project work and mathematical modelling for mathematics teachers in the Danish gymnasium, e.g. upper secondary level, grade 10-12. The course objective is to support the teachers to develop, try out...... in their own classes, evaluate and report a project based problem oriented course in mathematical modelling. The in-service course runs over one semester and includes three seminars of 3, 1 and 2 days. Experiences show that the course objectives in general are fulfilled and that the course projects...

Shainoor Khoja | IDRC - International Development Research Centre

International Development Research Centre (IDRC) Digital Library (Canada)

... a consulting firm operating internationally, working with multiple stakeholders to identify opportunities using technology and innovative business models to build capacity and scale business. Prior to this position, Shainoor held the position of Managing Director, Roshan Community at Afghanistan's leading mobile operator ...

Evaluating Internal Model Strength and Performance of Myoelectric Prosthesis Control Strategies.

Science.gov (United States)

Shehata, Ahmed W; Scheme, Erik J; Sensinger, Jonathon W

2018-05-01

On-going developments in myoelectric prosthesis control have provided prosthesis users with an assortment of control strategies that vary in reliability and performance. Many studies have focused on improving performance by providing feedback to the user but have overlooked the effect of this feedback on internal model development, which is key to improve long-term performance. In this paper, the strength of internal models developed for two commonly used myoelectric control strategies: raw control with raw feedback (using a regression-based approach) and filtered control with filtered feedback (using a classifier-based approach), were evaluated using two psychometric measures: trial-by-trial adaptation and just-noticeable difference. The performance of both strategies was also evaluated using Schmidt's style target acquisition task. Results obtained from 24 able-bodied subjects showed that although filtered control with filtered feedback had better short-term performance in path efficiency ( ), raw control with raw feedback resulted in stronger internal model development ( ), which may lead to better long-term performance. Despite inherent noise in the control signals of the regression controller, these findings suggest that rich feedback associated with regression control may be used to improve human understanding of the myoelectric control system.

Establishing an International Soil Modelling Consortium

Science.gov (United States)

Vereecken, Harry; Schnepf, Andrea; Vanderborght, Jan

2015-04-01

-change-feedback processes, bridge basic soil science research and management, and facilitate the communication between science and society . To meet these challenges an international community effort is required, similar to initiatives in systems biology, hydrology, and climate and crop research. We therefore propose to establish an international soil modelling consortium with the aims of 1) bringing together leading experts in modelling soil processes within all major soil disciplines, 2) addressing major scientific gaps in describing key processes and their long term impacts with respect to the different functions and ecosystem services provided by soil, 3) intercomparing soil model performance based on standardized and harmonized data sets, 4) identifying interactions with other relevant platforms related to common data formats, protocols and ontologies, 5) developing new approaches to inverse modelling, calibration, and validation of soil models, 6) integrating soil modelling expertise and state of the art knowledge on soil processes in climate, land surface, ecological, crop and contaminant models, and 7) linking process models with new observation, measurement and data evaluation technologies for mapping and characterizing soil properties across scales. Our consortium will bring together modelers and experimental soil scientists at the forefront of new technologies and approaches to characterize soils. By addressing these aims, the consortium will contribute to improve the role of soil modeling as a knowledge dissemination instrument in addressing key global issues and stimulate the development of translational research activities. This presentation will provide a compelling case for this much-needed effort, with a focus on tangible benefits to the scientific and food security communities.

International Jobs and Economic Development Impacts (I-JEDI) Model

Energy Technology Data Exchange (ETDEWEB)

2016-09-01

International Jobs and Economic Development Impacts (I-JEDI) is a freely available economic model that estimates gross economic impacts from wind, solar, biomass, and geothermal energy projects. Building on a similar model for the United States, I-JEDI was developed by the National Renewable Energy Laboratory under the U.S. government's Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) program to support partner countries in assessing economic impacts of LEDS actions in the energy sector.

Study on dynamic characteristics of reduced analytical model for PWR reactor internal structures