WorldWideScience

Sample records for internal transcribed spacer

  1. PCR-Internal Transcribed Spacer (ITS) genes sequencing and ...

    African Journals Online (AJOL)

    Methods: DNA extraction, purification, amplification and sequencing of Internal Transcribed Spacer (ITS) genes were per- formed using ... Keywords: Internal transcribed spacer genes, phylogenetic, genetic relationship, clinical and environmental fungi, HIV-TB. ... Nigeria. An Ethical clearance was obtained from the Eth-.

  2. The internal transcribed spacer rDNA specific markers for ...

    African Journals Online (AJOL)

    ... schinifolium. These primers are useful to study the structure of Rutaceae family. Such identifications will be helpful for phylogenetic analysis in intraspecies population of the genus Zanthoxylum. Key words: Zanthoxylum piperitum, rDNA Int-sp markers, phylogenetic relationship, ribosomal DNA, internal transcribed spacer.

  3. Phylogenetic relationships of the genus Phanerochaete inferred from the internal transcribed spacer region

    Science.gov (United States)

    Theodorus H. de Koker; Karen K. Nakasone; Jacques Haarhof; Harold H. Burdsall; Bernard J.H. Janse

    2003-01-01

    Phanerochaete is a genus of resupinate homobasidiomycetes that are saprophytic on woody debris and logs. Morphological studies in the past indicated that Phanerochaete is a heterogeneous assemblage of species. In this study the internal transcribed spacer (ITS) region of the nuclear ribosomal DNA was used to test the monophyly of the genus Phanerochaete and to infer...

  4. rDNA internal transcribed spacer sequence analysis of Lycoris Hert ...

    African Journals Online (AJOL)

    This paper suggested that the likelihood of hybrid origin of Lycoris species was supported and ITS could be used as a good molecular marker to identify plants of Lycoris. Keywords: Lycoris Hert., internal transcribed spacer (ITS), molecular taxonomy, interspecific relationship. African Journal of Biotechnology Vol. 11(29), pp.

  5. Fourteen internal transcribed spacers in the circular ribosomal DNA of Euglena gracilis.

    Science.gov (United States)

    Schnare, M N; Cook, J R; Gray, M W

    1990-09-05

    Cytoplasmic ribosomes from Euglena gracilis contain 16 rRNA components. These include the typical 5 S, 5.8 S and 19 S rRNAs that are found in other eukaryotes as well as 13 discrete small RNAs that interact to form the equivalent of eukaryotic 25-28 S rRNA (accompanying paper). We have utilized DNA sequencing techniques to establish that genes for all of these RNAs, with the exception of 5 S rRNA, are encoded by the 11,500 base-pair circular rDNA of E. gracilis. We have determined the relative positions of the coding regions for the 19 S rRNA and the 14 components (including 5.8 S rRNA) of the large subunit rRNA, thereby establishing that the genes for each of these rRNAs are separated by internal transcribed spacers. We conclude that sequences corresponding to these spacers are removed post-transcriptionally from a high molecular weight pre-rRNA, resulting in a multiply fragmented large subunit rRNA. Internal transcribed spacers, in positions analogous to some of these additional Euglena rDNA spacers, have been found in the rDNA of other organisms and organelles. This finding supports the view that at least some internal transcribed spacers may have been present at an early stage in the evolution of rRNA genes.

  6. Metagenomic data of fungal internal transcribed spacer from serofluid dish, a traditional Chinese fermented food

    Directory of Open Access Journals (Sweden)

    Peng Chen

    2016-03-01

    Full Text Available Serofluid dish (or Jiangshui, in Chinese, a traditional food in the Chinese culture for thousands of years, is made from vegetables by fermentation. In this work, microorganism community of the fermented serofluid dish was investigated by the culture-independent method. The metagenomic data in this article contains the sequences of fungal internal transcribed spacer (ITS regions of rRNA genes from 12 different serofluid dish samples. The metagenome comprised of 50,865 average raw reads with an average of 8,958,220 bp and G + C content is 45.62%. This is the first report on metagenomic data of fungal ITS from serofluid dish employing Illumina platform to profile the fungal communities of this little known fermented food from Gansu Province, China. The Metagenomic data of fungal internal transcribed spacer can be accessed at NCBI, SRA database accession no. SRP067411.

  7. Imidacloprid and Thiamethoxam Induced Mutations in Internal Transcribed Spacer 2 (ITS2) of Anopheles stephensi

    OpenAIRE

    Bhinder, Preety; Chaudhry, Asha; Barna, Bhupinder; Kaur, Satvinderjeet

    2012-01-01

    The present article deals with the polymerase chain reaction (PCR)-based genotoxicity evaluation of neonicotinoid pesticides, imidacloprid and thiamethoxam, by using the genome of a mosquito Anopheles stephensi taken as an experimental model. After treatment of the second instar larvae with LC20 of the pesticides for 24 h, the induced nucleotide sequence variations in the internal transcribed spacer 2 (ITS2) of freshly hatched unfed control and treated individuals was studied from the sequenc...

  8. Patterns of major divergence between the internal transcribed spacers of ribosomal DNA in Xenopus borealis and Xenopus laevis, and of minimal divergence within ribosomal coding regions.

    OpenAIRE

    Furlong, J C; Maden, B E

    1983-01-01

    We have determined the nucleotide sequences of the two internal transcribed spacers, the adjacent ribosomal coding sequences and the boundary between the external transcribed spacer and the 18S coding sequence in a cloned ribosomal transcription unit from Xenopus borealis. The transcribed spacers differ very extensively from those of X. laevis. Nevertheless, embedded in the internal transcribed spacers are several short sequence elements which are identical between the two species. These cons...

  9. Employing 454 amplicon pyrosequencing to reveal intragenomic divergence in the internal transcribed spacer rDNA region in fungi

    Science.gov (United States)

    Daniel L. Lindner; Tor Carlsen; Henrik Nilsson; Marie Davey; Trond Schumacher; Havard. Kauserud

    2013-01-01

    The rDNA internal transcribed spacer (ITS) region has been accepted as a DNA barcoding marker for fungi and is widely used in phylogenetic studies; however, intragenomic ITS variability has been observed in a broad range of taxa, including prokaryotes, plants, animals, and fungi, and this variability has the potential to inflate species richness estimates in molecular...

  10. Saprolegniaceae identified on amphibian eggs throughout the Pacific Northwest, USA, by internal transcribed spacer sequences and phylogenetic analysis

    Science.gov (United States)

    Jill E. Petrisko; Christopher A. Pearl; David S. Pilliod; Peter P. Sheridan; Charles F. Williams; Charles R. Peterson; R. Bruce Bury

    2008-01-01

    We assessed the diversity and phylogeny of Saprolegniaceae on amphibian eggs from the Pacific Northwest, with particular focus on Saprolegnia ferax, a species implicated in high egg mortality. We identified isolates from eggs of six amphibians with the internal transcribed spacer (ITS) and 5.8S gene regions and BLAST of the GenBank database. We...

  11. The internal transcribed spacer of nuclear ribosomal DNA in the gymnosperm Gnetum.

    Science.gov (United States)

    Won, Hyosig; Renner, Susanne S

    2005-09-01

    We analyze the structure of the internal transcribed spacers ITS1 and ITS2 of the nuclear ribosomal DNA in the gymnosperm Gnetum, using a phylogenetic framework derived mainly from an intron in the nuclear low-copy LEAFY gene. Gnetum comprises 25-35 species in South America, Africa, and Asia, of which we sampled 16, each with two to six clones. Criteria used to assess ITS functionality were highly divergent nucleotide substitution, GC content, secondary structure, and incongruent phylogenetic placement of presumed paralogs. The length of ITS1 ranged from 225 to 986 bp and that of ITS2 from 259 to 305 bp, the largest ranges so far reported from seed plants. Gnetum ITS1 contains two informative sequence motifs, but different from other gymnosperms, there are only few and short (7-13 bp) tandem repeats. Gnetum ITS2 contains two structural motifs, modified in different clades by shortening of stems and loops. Conspecific sequences grouped together except for two recombinant pseudogenes that had ITS1 of one clade and ITS2 of another. Most of the pseudogenic ITS copies, paralogs, and putative chimeras occurred in a clade that according to a fossil-calibrated chloroplast-DNA clock has an age of a few million years. Based on morphology and chromosome numbers, the most plausible causes of the observed high levels of ITS polymorphism are hybridization, allopolyploidy, and introgression.

  12. Definition of Eight Mulberry Species in the Genus Morus by Internal Transcribed Spacer-Based Phylogeny.

    Directory of Open Access Journals (Sweden)

    Qiwei Zeng

    Full Text Available Mulberry, belonging to the order Rosales, family Moraceae, and genus Morus, has received attention because of both its economic and medicinal value, as well as for its important ecological function. The genus Morus has a worldwide distribution, however, its taxonomy remains complex and disputed. Many studies have attempted to classify Morus species, resulting in varied numbers of designated Morus spp. To address this issue, we used information from internal transcribed spacer (ITS genetic sequences to study the taxonomy of all the members of generally accepted genus Morus. We found that intraspecific 5.8S rRNA sequences were identical but that interspecific 5.8S sequences were diverse. M. alba and M. notabilis showed the shortest (215 bp and the longest (233 bp ITS1 sequence length, respectively. With the completion of the mulberry genome, we could identify single nucleotide polymorphisms within the ITS locus in the M. notabilis genome. From reconstruction of a phylogenetic tree based on the complete ITS data, we propose that the Morus genus should be classified into eight species, including M. alba, M. nigra, M. notabilis, M. serrata, M. celtidifolia, M. insignis, M. rubra, and M. mesozygia. Furthermore, the classification of the ITS sequences of known interspecific hybrid clones into both paternal and maternal clades indicated that ITS variation was sufficient to distinguish interspecific hybrids in the genus Morus.

  13. Internal Transcribed Spacer 1 (ITS1 based sequence typing reveals phylogenetically distinct Ascaris population

    Directory of Open Access Journals (Sweden)

    Koushik Das

    2015-01-01

    Full Text Available Taxonomic differentiation among morphologically identical Ascaris species is a debatable scientific issue in the context of Ascariasis epidemiology. To explain the disease epidemiology and also the taxonomic position of different Ascaris species, genome information of infecting strains from endemic areas throughout the world is certainly crucial. Ascaris population from human has been genetically characterized based on the widely used genetic marker, internal transcribed spacer1 (ITS1. Along with previously reported and prevalent genotype G1, 8 new sequence variants of ITS1 have been identified. Genotype G1 was significantly present among female patients aged between 10 to 15 years. Intragenic linkage disequilibrium (LD analysis at target locus within our study population has identified an incomplete LD value with potential recombination events. A separate cluster of Indian isolates with high bootstrap value indicate their distinct phylogenetic position in comparison to the global Ascaris population. Genetic shuffling through recombination could be a possible reason for high population diversity and frequent emergence of new sequence variants, identified in present and other previous studies. This study explores the genetic organization of Indian Ascaris population for the first time which certainly includes some fundamental information on the molecular epidemiology of Ascariasis.

  14. Internal Transcribed Spacer 1 (ITS1) based sequence typing reveals phylogenetically distinct Ascaris population

    Science.gov (United States)

    Das, Koushik; Chowdhury, Punam; Ganguly, Sandipan

    2015-01-01

    Taxonomic differentiation among morphologically identical Ascaris species is a debatable scientific issue in the context of Ascariasis epidemiology. To explain the disease epidemiology and also the taxonomic position of different Ascaris species, genome information of infecting strains from endemic areas throughout the world is certainly crucial. Ascaris population from human has been genetically characterized based on the widely used genetic marker, internal transcribed spacer1 (ITS1). Along with previously reported and prevalent genotype G1, 8 new sequence variants of ITS1 have been identified. Genotype G1 was significantly present among female patients aged between 10 to 15 years. Intragenic linkage disequilibrium (LD) analysis at target locus within our study population has identified an incomplete LD value with potential recombination events. A separate cluster of Indian isolates with high bootstrap value indicate their distinct phylogenetic position in comparison to the global Ascaris population. Genetic shuffling through recombination could be a possible reason for high population diversity and frequent emergence of new sequence variants, identified in present and other previous studies. This study explores the genetic organization of Indian Ascaris population for the first time which certainly includes some fundamental information on the molecular epidemiology of Ascariasis. PMID:26504510

  15. Internal Transcribed Spacer 1 (ITS1) based sequence typing reveals phylogenetically distinct Ascaris population.

    Science.gov (United States)

    Das, Koushik; Chowdhury, Punam; Ganguly, Sandipan

    2015-01-01

    Taxonomic differentiation among morphologically identical Ascaris species is a debatable scientific issue in the context of Ascariasis epidemiology. To explain the disease epidemiology and also the taxonomic position of different Ascaris species, genome information of infecting strains from endemic areas throughout the world is certainly crucial. Ascaris population from human has been genetically characterized based on the widely used genetic marker, internal transcribed spacer1 (ITS1). Along with previously reported and prevalent genotype G1, 8 new sequence variants of ITS1 have been identified. Genotype G1 was significantly present among female patients aged between 10 to 15 years. Intragenic linkage disequilibrium (LD) analysis at target locus within our study population has identified an incomplete LD value with potential recombination events. A separate cluster of Indian isolates with high bootstrap value indicate their distinct phylogenetic position in comparison to the global Ascaris population. Genetic shuffling through recombination could be a possible reason for high population diversity and frequent emergence of new sequence variants, identified in present and other previous studies. This study explores the genetic organization of Indian Ascaris population for the first time which certainly includes some fundamental information on the molecular epidemiology of Ascariasis.

  16. Molecular phylogeny of Oncaeidae (Copepoda) using nuclear ribosomal internal transcribed spacer (ITS rDNA).

    Science.gov (United States)

    Di Capua, Iole; Maffucci, Fulvio; Pannone, Raimondo; Mazzocchi, Maria Grazia; Biffali, Elio; Amato, Alberto

    2017-01-01

    Copepods belonging to the Oncaeidae family are commonly and abundantly found in marine zooplankton. In the Mediterranean Sea, forty-seven oncaeid species occur, of which eleven in the Gulf of Naples. In this Gulf, several Oncaea species were morphologically analysed and described at the end of the XIX century by W. Giesbrecht. In the same area, oncaeids are being investigated over seasonal and inter-annual scales at the long-term coastal station LTER-MC. In the present work, we identified six oncaeid species using the nuclear ribosomal internal transcribed spacers (ITS rDNA) and the mitochondrial cytochrome c oxidase subunit I (mtCOI). Phylogenetic analyses based on these two genomic regions validated the sisterhood of the genera Triconia and the Oncaea sensu stricto. ITS1 and ITS2 phylogenies produced incongruent results about the position of Oncaea curta, calling for further investigations on this species. We also characterised the ITS2 region by secondary structure predictions and found that all the sequences analysed presented the distinct eukaryotic hallmarks. A Compensatory Base Change search corroborated the close relationship between O. venusta and O. curta and between O. media and O. venusta already identified by ITS phylogenies. The present results, which stem from the integration of molecular and morphological taxonomy, represent an encouraging step towards an improved knowledge of copepod biodiversity: The two complementary approaches, when applied to long-term copepod monitoring, will also help to better understanding their genetic variations and ecological niches of co-occurring species.

  17. Molecular phylogenetic analysis of Indonesia Solanaceae based on DNA sequences of internal transcribed spacer region

    Science.gov (United States)

    Hidayat, Topik; Priyandoko, Didik; Islami, Dina Karina; Wardiny, Putri Yunitha

    2016-02-01

    Solanaceae is one of largest family in Angiosperm group with highly diverse in morphological character. In Indonesia, this group of plant is very popular due to its usefulness as food, ornamental and medicinal plants. However, investigation on phylogenetic relationship among the member of this family in Indonesia remains less attention. The purpose of this study was to evaluate the phylogenetics relationship of the family especially distributed in Indonesia. DNA sequences of Internal Transcribed Spacer (ITS) region of 19 species of Solanaceae and three species of outgroup, which belongs to family Convolvulaceae, Apocynaceae, and Plantaginaceae, were isolated, amplified, and sequenced. Phylogenetic tree analysis based on parsimony method was conducted with using data derived from the ITS-1, 5.8S, and ITS-2, separately, and the combination of all. Results indicated that the phylogenetic tree derived from the combined data established better pattern of relationship than separate data. Thus, three major groups were revealed. Group 1 consists of tribe Datureae, Cestreae, and Petunieae, whereas group 2 is member of tribe Physaleae. Group 3 belongs to tribe Solaneae. The use of the ITS region as a molecular markers, in general, support the global Solanaceae relationship that has been previously reported.

  18. Molecular Phylogenetic Screening of Withania somnifera Relative From Indonesia Based on Internal Transcribed Spacer Region

    Directory of Open Access Journals (Sweden)

    Topik Hidayat

    2016-04-01

    Full Text Available Withania somnifera (family Solanaceae, known commonly as Ashwaganda, is one of the important medicinal plants, and recent studies reported that Withanone, one of the chemical components in this plant, has ability to kill cancer cell. Because of endemic state of this plant to South Asia, exploring plant species under the same family which grow well in Indonesia has been of interest. The purpose of this study was to screen the Indonesian plant which has strong phylogenetic relationship with Ashwaganda. Thus, phylogenetic analysis using DNA sequences of internal transcribed spacer (ITS region was conducted. Thus, 19 species of Solanaceae and two species of Convolvulaceae as outgroup were examined. Five ITS regions of Ashwaganda retrieved from GenBank were included in the phylogenetic analysis. Parsimony analysis showed that Indonesia Solanaceae comprises seven groups which is consistent with the global Solanaceae relationship as previously reported. Furthermore, our study revealed that two species, Physalis angulata and Physalis peruviana, are relative to W. somnifera. Morphologically, they share characters of flower and fruit. This result indicated that these two species are potential to have similar chemical properties as Ashwaganda, thus we can have new variants of Withanone originated from Indonesia with similar effect.

  19. Internal transcribed spacer 2 barcode: A good tool for identifying Acanthopanacis cortex

    Directory of Open Access Journals (Sweden)

    Sha eZhao

    2015-10-01

    Full Text Available Acanthopanacis cortex has been used in clinical applications for a long time. Considering some historical and geographical factors, Acanthopanacis cortex is easily confused with other herbs in medicine markets, thereby causing potential safety issues. In this study, we used the internal transcribed spacer 2 (ITS2 barcode to identify 69 samples belonging to six species, including Acanthopanacis cortex and its adulterants. The nearest distance, single-nucleotide polymorphisms (SNPs, and neighbor-joining (NJ tree methods were used to evaluate the identification ability of the ITS2 barcode. According to the kimura-2-parameter model, the intraspecific distance of Eleutherococcus nodiflorus ITS2 sequences ranged from 0 to 0.0132. The minimum interspecific distance between E. nodiflorus and E. giraldii was 0.0221, which was larger than the maximum intraspecific distance of E. nodiflorus. Three stable SNPs in ITS2 can be used to distinguish Acanthopanacis cortex and its closely related species. The NJ tree indicated that the Acanthopanacis cortex samples clustered into one clade, which can be distinguished clearly from the adulterants of this herb. A secondary structure of ITS2 provided another dimensionality to identify species. In conclusion, the ITS2 barcode effectively identifies Acanthopanacis cortex, and DNA barcoding is a convenient tool for medicine market supervision.

  20. Definition of Eight Mulberry Species in the Genus Morus by Internal Transcribed Spacer-Based Phylogeny

    Science.gov (United States)

    Zeng, Qiwei; Chen, Hongyu; Zhang, Chao; Han, Minjing; Li, Tian; Qi, Xiwu; Xiang, Zhonghuai; He, Ningjia

    2015-01-01

    Mulberry, belonging to the order Rosales, family Moraceae, and genus Morus, has received attention because of both its economic and medicinal value, as well as for its important ecological function. The genus Morus has a worldwide distribution, however, its taxonomy remains complex and disputed. Many studies have attempted to classify Morus species, resulting in varied numbers of designated Morus spp. To address this issue, we used information from internal transcribed spacer (ITS) genetic sequences to study the taxonomy of all the members of generally accepted genus Morus. We found that intraspecific 5.8S rRNA sequences were identical but that interspecific 5.8S sequences were diverse. M. alba and M. notabilis showed the shortest (215 bp) and the longest (233 bp) ITS1 sequence length, respectively. With the completion of the mulberry genome, we could identify single nucleotide polymorphisms within the ITS locus in the M. notabilis genome. From reconstruction of a phylogenetic tree based on the complete ITS data, we propose that the Morus genus should be classified into eight species, including M. alba, M. nigra, M. notabilis, M. serrata, M. celtidifolia, M. insignis, M. rubra, and M. mesozygia. Furthermore, the classification of the ITS sequences of known interspecific hybrid clones into both paternal and maternal clades indicated that ITS variation was sufficient to distinguish interspecific hybrids in the genus Morus. PMID:26266951

  1. Evaluating the Ribosomal Internal Transcribed Spacer (ITS) as a Candidate Dinoflagellate Barcode Marker

    Science.gov (United States)

    Stern, Rowena F.; Andersen, Robert A.; Jameson, Ian; Küpper, Frithjof C.; Coffroth, Mary-Alice; Vaulot, Daniel; Le Gall, Florence; Véron, Benoît; Brand, Jerry J.; Skelton, Hayley; Kasai, Fumai; Lilly, Emily L.; Keeling, Patrick J.

    2012-01-01

    Background DNA barcoding offers an efficient way to determine species identification and to measure biodiversity. For dinoflagellates, an ancient alveolate group of about 2000 described extant species, DNA barcoding studies have revealed large amounts of unrecognized species diversity, most of which is not represented in culture collections. To date, two mitochondrial gene markers, Cytochrome Oxidase I (COI) and Cytochrome b oxidase (COB), have been used to assess DNA barcoding in dinoflagellates, and both failed to amplify all taxa and suffered from low resolution. Nevertheless, both genes yielded many examples of morphospecies showing cryptic speciation and morphologically distinct named species being genetically similar, highlighting the need for a common marker. For example, a large number of cultured Symbiodinium strains have neither taxonomic identification, nor a common measure of diversity that can be used to compare this genus to other dinoflagellates. Methodology/Principal Findings The purpose of this study was to evaluate the Internal Transcribed Spacer units 1 and 2 (ITS) of the rDNA operon, as a high resolution marker for distinguishing species dinoflagellates in culture. In our study, from 78 different species, the ITS barcode clearly differentiated species from genera and could identify 96% of strains to a known species or sub-genus grouping. 8.3% showed evidence of being cryptic species. A quarter of strains identified had no previous species identification. The greatest levels of hidden biodiversity came from Scrippsiella and the Pfiesteriaceae family, whilst Heterocapsa strains showed a high level of mismatch to their given species name. Conclusions/Significance The ITS marker was successful in confirming species, revealing hidden diversity in culture collections. This marker, however, may have limited use for environmental barcoding due to paralogues, the potential for unidentifiable chimaeras and priming across taxa. In these cases ITS would

  2. Phylogenetic analysis of cercospora and mycosphaerella based on the internal transcribed spacer region of ribosomal DNA.

    Science.gov (United States)

    Goodwin, S B; Dunkle, L D; Zismann, V L

    2001-07-01

    ABSTRACT Most of the 3,000 named species in the genus Cercospora have no known sexual stage, although a Mycosphaerella teleomorph has been identified for a few. Mycosphaerella is an extremely large and important genus of plant pathogens, with more than 1,800 named species and at least 43 associated anamorph genera. The goal of this research was to perform a large-scale phylogenetic analysis to test hypotheses about the past evolutionary history of Cercospora and Mycosphaerella. Based on the phylogenetic analysis of internal transcribed spacer (ITS) sequence data (ITS1, 5.8S rRNA gene, ITS2), the genus Mycosphaerella is monophyletic. In contrast, many anamorph genera within Mycosphaerella were polyphyletic and were not useful for grouping species. One exception was Cercospora, which formed a highly supported monophyletic group. Most Cercospora species from cereal crops formed a subgroup within the main Cercospora cluster. Only species within the Cercospora cluster produced the toxin cercosporin, suggesting that the ability to produce this compound had a single evolutionary origin. Intraspecific variation for 25 taxa in the Mycosphaerella clade averaged 1.7 nucleotides (nts) in the ITS region. Thus, isolates with ITS sequences that differ by two or more nucleotides may be distinct species. ITS sequences of groups I and II of the gray leaf spot pathogen Cercospora zeae-maydis differed by 7 nts and clearly represent different species. There were 6.5 nt differences on average between the ITS sequences of the sorghum pathogen Cercospora sorghi and the maize pathogen Cercospora sorghi var. maydis, indicating that the latter is a separate species and not simply a variety of Cercospora sorghi. The large monophyletic Mycosphaerella cluster contained a number of anamorph genera with no known teleomorph associations. Therefore, the number of anamorph genera related to Mycosphaerella may be much larger than suspected previously.

  3. Molecular analysis of fungal populations in patients with oral candidiasis using internal transcribed spacer region.

    Science.gov (United States)

    Ieda, Shinsuke; Moriyama, Masafumi; Takeshita, Toru; Takashita, Toru; Maehara, Takashi; Imabayashi, Yumi; Shinozaki, Shoichi; Tanaka, Akihiko; Hayashida, Jun-Nosuke; Furukawa, Sachiko; Ohta, Miho; Yamashita, Yoshihisa; Nakamura, Seiji

    2014-01-01

    Oral candidiasis is closely associated with changes in the oral fungal flora and is caused primarily by Candida albicans. Conventional methods of fungal culture are time-consuming and not always conclusive. However, molecular genetic analysis of internal transcribed spacer (ITS) regions of fungal rRNA is rapid, reproducible and simple to perform. In this study we examined the fungal flora in patients with oral candidiasis and investigated changes in the flora after antifungal treatment using length heterogeneity-polymerization chain reaction (LH-PCR) analysis of ITS regions. Fifty-two patients with pseudomembranous oral candidiasis (POC) and 30 healthy controls were included in the study. Fungal DNA from oral rinse was examined for fungal species diversity by LH-PCR. Fungal populations were quantified by real-time PCR and previously-unidentified signals were confirmed by nucleotide sequencing. Relationships between the oral fungal flora and treatment-resistant factors were also examined. POC patients showed significantly more fungal species and a greater density of fungi than control individuals. Sixteen fungi were newly identified. The fungal populations from both groups were composed predominantly of C. albicans, though the ratio of C. dubliniensis was significantly higher in POC patients than in controls. The diversity and density of fungi were significantly reduced after treatment. Furthermore, fungal diversity and the proportion of C. dubliniensis were positively correlated with treatment duration. These results suggest that C. dubliniensis and high fungal flora diversity might be involved in the pathogenesis of oral candidiasis. We therefore conclude that LH-PCR is a useful technique for diagnosing and assessing the severity of oral candidal infection.

  4. Reliable differentiation of Meyerozyma guilliermondii from Meyerozyma caribbica by internal transcribed spacer restriction fingerprinting.

    Science.gov (United States)

    Romi, Wahengbam; Keisam, Santosh; Ahmed, Giasuddin; Jeyaram, Kumaraswamy

    2014-02-28

    Meyerozyma guilliermondii (anamorph Candida guilliermondii) and Meyerozyma caribbica (anamorph Candida fermentati) are closely related species of the genetically heterogenous M. guilliermondii complex. Conventional phenotypic methods frequently misidentify the species within this complex and also with other species of the Saccharomycotina CTG clade. Even the long-established sequencing of large subunit (LSU) rRNA gene remains ambiguous. We also faced similar problem during identification of yeast isolates of M. guilliermondii complex from indigenous bamboo shoot fermentation in North East India. There is a need for development of reliable and accurate identification methods for these closely related species because of their increasing importance as emerging infectious yeasts and associated biotechnological attributes. We targeted the highly variable internal transcribed spacer (ITS) region (ITS1-5.8S-ITS2) and identified seven restriction enzymes through in silico analysis for differentiating M. guilliermondii from M. caribbica. Fifty five isolates of M. guilliermondii complex which could not be delineated into species-specific taxonomic ranks by API 20 C AUX and LSU rRNA gene D1/D2 sequencing were subjected to ITS-restriction fragment length polymorphism (ITS-RFLP) analysis. TaqI ITS-RFLP distinctly differentiated the isolates into M. guilliermondii (47 isolates) and M. caribbica (08 isolates) with reproducible species-specific patterns similar to the in silico prediction. The reliability of this method was validated by ITS1-5.8S-ITS2 sequencing, mitochondrial DNA RFLP and electrophoretic karyotyping. We herein described a reliable ITS-RFLP method for distinct differentiation of frequently misidentified M. guilliermondii from M. caribbica. Even though in silico analysis differentiated other closely related species of M. guilliermondii complex from the above two species, it is yet to be confirmed by in vitro analysis using reference strains. This method can be used

  5. Molecular phylogeny of Oncaeidae (Copepoda using nuclear ribosomal internal transcribed spacer (ITS rDNA.

    Directory of Open Access Journals (Sweden)

    Iole Di Capua

    Full Text Available Copepods belonging to the Oncaeidae family are commonly and abundantly found in marine zooplankton. In the Mediterranean Sea, forty-seven oncaeid species occur, of which eleven in the Gulf of Naples. In this Gulf, several Oncaea species were morphologically analysed and described at the end of the XIX century by W. Giesbrecht. In the same area, oncaeids are being investigated over seasonal and inter-annual scales at the long-term coastal station LTER-MC. In the present work, we identified six oncaeid species using the nuclear ribosomal internal transcribed spacers (ITS rDNA and the mitochondrial cytochrome c oxidase subunit I (mtCOI. Phylogenetic analyses based on these two genomic regions validated the sisterhood of the genera Triconia and the Oncaea sensu stricto. ITS1 and ITS2 phylogenies produced incongruent results about the position of Oncaea curta, calling for further investigations on this species. We also characterised the ITS2 region by secondary structure predictions and found that all the sequences analysed presented the distinct eukaryotic hallmarks. A Compensatory Base Change search corroborated the close relationship between O. venusta and O. curta and between O. media and O. venusta already identified by ITS phylogenies. The present results, which stem from the integration of molecular and morphological taxonomy, represent an encouraging step towards an improved knowledge of copepod biodiversity: The two complementary approaches, when applied to long-term copepod monitoring, will also help to better understanding their genetic variations and ecological niches of co-occurring species.

  6. Length variation in the internal transcribed spacers of ribosomal DNA in Picea abies and related species.

    Science.gov (United States)

    Karvonen, P; Szmidt, A E; Savolainen, O

    1994-12-01

    The structure and variation of nuclear ribosomal DNA (rDNA) units of Picea abies, (L.) Karst. was studied by restriction mapping and Southern hybridization. Conspicuous length variation was found in the internal transcribed spacer (ITS) region of P. abies, although the length of this region is highly conserved both within and among most of the plant species. Two types of ITS variants (A and B), displaying a size difference of 0.5 kb in the ITS2 region, were present within individuals of P. abies from Sweden, Central Europe and Siberia. A preliminary survey of 14 additional Eurasian and North American species of Picea suggested that length variation in the ITS region is widespread in this genus. Alltogether three length variants (A, B and C) were identified. Within individuals of eight Picea species, two length variants were present within the genome (combinations of A and B variants in P. glehnii, P. maximowiczii, P. omorika, P. polita and P. sitchensis and variants B and C in P. jezoensis, P. likiangensis and P. spinulosa). Within individuals from five species, however only one rDNA variant was present in their genome (variant A in P. aurantiaca, P. engelmannii, P. glauca, P. koraiensis and P. koyamai; variant B in P. bicolor). The ITS length variation will be useful as a molecular marker in evolutionary studies of the Picea species complex, whose phylogeny is controversial. The presence of intraindividual variation in, and shared polymorphism of the, ITS length variants raises questions about the occurrence of interspecific hybridization during the evolutionary history of Picea.

  7. Nuclear ribosomal internal transcribed spacer (ITS) region as a universal DNA barcode marker for Fungi.

    Science.gov (United States)

    Schoch, Conrad L; Seifert, Keith A; Huhndorf, Sabine; Robert, Vincent; Spouge, John L; Levesque, C André; Chen, Wen

    2012-04-17

    Six DNA regions were evaluated as potential DNA barcodes for Fungi, the second largest kingdom of eukaryotic life, by a multinational, multilaboratory consortium. The region of the mitochondrial cytochrome c oxidase subunit 1 used as the animal barcode was excluded as a potential marker, because it is difficult to amplify in fungi, often includes large introns, and can be insufficiently variable. Three subunits from the nuclear ribosomal RNA cistron were compared together with regions of three representative protein-coding genes (largest subunit of RNA polymerase II, second largest subunit of RNA polymerase II, and minichromosome maintenance protein). Although the protein-coding gene regions often had a higher percent of correct identification compared with ribosomal markers, low PCR amplification and sequencing success eliminated them as candidates for a universal fungal barcode. Among the regions of the ribosomal cistron, the internal transcribed spacer (ITS) region has the highest probability of successful identification for the broadest range of fungi, with the most clearly defined barcode gap between inter- and intraspecific variation. The nuclear ribosomal large subunit, a popular phylogenetic marker in certain groups, had superior species resolution in some taxonomic groups, such as the early diverging lineages and the ascomycete yeasts, but was otherwise slightly inferior to the ITS. The nuclear ribosomal small subunit has poor species-level resolution in fungi. ITS will be formally proposed for adoption as the primary fungal barcode marker to the Consortium for the Barcode of Life, with the possibility that supplementary barcodes may be developed for particular narrowly circumscribed taxonomic groups.

  8. Sequence and structure correlation of human ribosomal transcribed spacers.

    Science.gov (United States)

    Gonzalez, I L; Chambers, C; Gorski, J L; Stambolian, D; Schmickel, R D; Sylvester, J E

    1990-03-05

    We report the sequences of the transcribed spacers of human rRNA that now allow us to piece together the entire primary transcript sequence of approximately 13.3 x 10(3) base-pairs. Comparison of transcribed spacer sequences with those of variable regions of rRNA and with those of the non-transcribed spacers supports the hypothesis that the variable regions are descended from transcribed spacers. Nucleotide sequence-derived secondary structures for the 5' external transcribed spacer and for internal transcribed spacers 1 and 2 match both the sizes and shapes of the structures that were visualized 15 years ago on electron micrographs. Parts of these structures are conserved in mammals and may be related to transcript processing.

  9. PCR-Based Diagnosis of Neoscytalidium dimidiatum Infection Using Internal Transcribed Spacer 1 Region of Ribosomal DNA Primers

    Directory of Open Access Journals (Sweden)

    Charussri Leeyaphan, M.D.

    2018-01-01

    Full Text Available Objective: To develop N. dimidiatum-specific single PCR-based identification with DNA sequences of nuclear ribosomal internal transcribed spacer (ITS 1 region primers to facilitate the rapid and accurate detection of N. dimidiatum. Methods: N. dimidiatum-specific PCR primers were designed based on the sequence of the internal transcribed spacer 1 region, which is located between 18S and 5.8S nuclear rDNA. Fungal DNA extracted from common causative species for superficial fungal infection including: 2 strains of N. dimidiatum, 9 species of dermatophyte (DMP and 25 species of non-dermatophyte (NDM colonies grown on culture plates were used for PCR analysis. Also, 30 clinical specimens collected from 30 patients clinically diagnosed with fungal nail and feet infection who attended Dermatology clinic Siriraj Hospital during October 2015 to November 2015 were used for PCR assay. Results: Using N. dimidiatum-specific PCR primers, the PCR product was amplified from two standard strains of N. dimidiatum, and there was no amplification from other DMP or NDM species. Regarding sensitivity as lower limit of detection, this PCR method was able to detect 10 pg of N. dimidiatum DNA with ethidium bromide staining and could detect N. dimidiatum in clinical samples. Conclusion: This newly developed N. dimidiatum-specific PCR identification system is rapid, sensitive, and specific. This diagnostic method will facilitate early and accurate diagnosis and accelerate appropriate treatment in patients with N. dimidiatum infection.

  10. Patterns of major divergence between the internal transcribed spacers of ribosomal DNA in Xenopus borealis and Xenopus laevis, and of minimal divergence within ribosomal coding regions.

    Science.gov (United States)

    Furlong, J C; Maden, B E

    1983-01-01

    We have determined the nucleotide sequences of the two internal transcribed spacers, the adjacent ribosomal coding sequences and the boundary between the external transcribed spacer and the 18S coding sequence in a cloned ribosomal transcription unit from Xenopus borealis. The transcribed spacers differ very extensively from those of X. laevis. Nevertheless, embedded in the internal transcribed spacers are several short sequence elements which are identical between the two species. These conserved elements are laterally displaced by substantial distances in the X. borealis sequence with respect to that of X. laevis. These relative displacements imply that insertions and deletions have played a major role in transcribed spacer divergence in Xenopus. This in turn implies that large regions of the transcribed spacers do not play a sequence-specific role in ribosome maturation. In contrast, the sequenced parts of the ribosomal coding regions, which encompass 670 nucleotides, differ at only three points from the corresponding sequences in X. laevis, each by a single substitution. These substitutions are readily accommodated by current models for rRNA higher order structure.

  11. [Analysis of polymorphism on ribosomal internal transcribed spacer 2 in four species of sandflies with PCR-RFLP].

    Science.gov (United States)

    Gu, Deng-An; Zhang, Yi; Lan, Qin-Xian

    2012-04-30

    Internal transcribed spacer 2 region in 4 species of sandflies from China (Phlebotomus chinensis, Ph. wui, Ph. longiductus and Ph. alexandri) was genotyped by PCR-RFLP. Four kinds of RFLP band patterns were created by Dra I, that were A 450 bp, B 154 bp/127 bp/93 bp/66 bp/10 hp, C 311 bp/80 bp/60 bp, and D 353 bp/300 bp/160 bp/58 bp. There were identical pattern types in various sandflies, AA in Ph. chinensis, BB in Ph. alexandri, CC in Ph. wui, and DD in Ph. longiductus. The results indicated that PCR-RFLP can be used to identify the four species of Phlebotomus in China.

  12. Trypanosoma evansi: molecular homogeneity as inferred by phenetical analysis of ribosomal internal transcribed spacers DNA of an eclectic parasite.

    Science.gov (United States)

    de Oliveira Lima, Aneska Norek; da Silva Santos, Simone; Herrera, Heitor Miraglia; Gama, Carla; Cupolillo, Elisa; Jansen, Ana Maria; Fernandes, Octávio

    2008-03-01

    The protozoan Trypanosoma evansi is described as presenting high morphological and genetic similarities among the isolates despite its biological heterogeneity and wide geographical distribution. PCR amplification of the internal transcribed spacers of the ribosomal gene in combination with the coding region of the 5.8S ribosomal subunit further submitted to restriction enzymes digestion were carried out in DNAs extracted from 41 T. evansi strains isolated from horses, dogs, coatis and capybaras from two distinct regions of the Brazilian Pantanal. We also used one T. evansi isolate from Africa, one from Asia and one isolate of T. b. brucei from Africa. Analysis of the RFLP profiles yielded a unique "riboprinting" that does not vary intraspecifically. These results provide insights on the ribosomal gene organization of T. evansi and showed that ITS analysis by RFLP show high genetic similarity of this locus among isolates of this protozoan parasite.

  13. Kekerabatan Genetik Caplak Rhiphicephalus (Boophilus microplus Asal IndonesiaBerdasarkan Sekuen Internal Transcribed Spacer-2 (GENETIC RELATIONSHIP INDONESIAN RHIPHICEPHALUS (BOOPHILUS MICROPLUS TICK BASED ON INTERNAL TRANSCRIBED SPACER-2 SEQUENSE

    Directory of Open Access Journals (Sweden)

    Ana Sahara

    2015-10-01

    Full Text Available Rhiphicephalus (Boophilus microplus is important obligatory blood feeding ectoparasites transmittingmany different viral, bacterial and protozoan and plays a role as a vector of Babesia sp., The leria sp. andAnaplasma sp. in cattle. The accuracy in identifying and distinguishing interspecies and intraspeciesdiversity among parasites is needed to understand the epidemiology, biology and capacity as a vector.Variations in the DNA base sequence of the internal transcribed spacer region2 (ITS 2 has been used asa molecular marker for identification in an effort to determine phylogenetic relationships. The aim of thisstudy was to determine the ITS 2 gene nucleotide sequence of R. microplus, which was expected to beuseful for accurate identification the parasite diversity and phylogenetic relationship among many differentspecies. DNA amplification was conducted using BOO2 forward dan BOO2 reverse primers. The DNAsamples containing ITS2 region fragment of 1099 nt were derived from the nucleotide sequence multiplealignments of R.microplus and other ticks genes obtained from Gene bank using Clustal W software, andthen analyzed using the MEGA program version 6. Genetic distances based on nucleotide sequence weredetermined with Kimura 2-parameter method producing the smallest genetic distance of 0 % and 1.2 %.Construction of phylogenetic trees using the Neighbor joining method showed that ticks from variousregions in Indonesia was species complex which have a closer with R.microplus isolates from India, Laos,South Africa, China and Australia R.australis origin.

  14. Analysis of the internal transcribed spacer region of Ascaris suum and Ascaris lumbricoides derived from free range Tibetan pigs.

    Science.gov (United States)

    Li, Kun; Luo, Houqiang; Zhang, Hui; Mehmood, Khalid; Shahzad, Muhammad; Zhang, Lihong; Li, Jiakui

    2018-05-01

    Ascaris suum (A. suum) is the most commonly occurring worldwide internal parasite of pigs; however, little is known about this organism in Tibetan pigs in China. A study was carried to isolate and identify the characteristics of internal transcribed spacer region (ITS) gene of A. suum derived from Tibetan pigs. Adult nematodes were collected from Tibetan pigs in 2015-2016. Total genomic DNA of the extracted parasites was performed and a fragment of the ITS of mitochondrial (mt) gene was amplified. The amplicons were cloned into PGEM®-T Easy Vector (Promega, WI) and the positive clones were sequenced by ABI 3730 × 1 sequencer. The sequence and phylogenetic analysis were performed by ClustalWVer. 1.4 and MEGA 6.0 software, respectively. Results indicated that the identity of A. suum isolates was 98.4%-99.9% with previously reported pig isolates, and 99.4%-99.7% with A. lumbricoides isolates. To the best of our knowledge, this is the first report describing the characteristics of ITS gene of A. suum derived from the Tibetan pigs from high and remote areas depicting high identity with the isolates of both A. suum and A. lumbricoides.

  15. Rapid and accurate identification of isolates of Candida species by melting peak and melting curve analysis of the internally transcribed spacer region 2 fragment (ITS2-MCA)

    NARCIS (Netherlands)

    Decat, E.; van Mechelen, E.; Saerens, B.; Vermeulen, S.J.T.; Boekhout, T.; de Blaiser, S.; Vaneechoutte, M.; Deschaght, P.

    2013-01-01

    Rapid identification of clinically important yeasts can facilitate the initiation of anti-fungal therapy, since susceptibility is largely species-dependent. We evaluated melting peak and melting curve analysis of the internally transcribed spacer region 2 fragment (ITS2-MCA) as an identification

  16. Comparison of the Sequences of the Internal Transcribed Spacer Regions and PbGP43 Genes of Paracoccidioides brasiliensis from Patients and Armadillos (Dasypus novemcinctus)

    Science.gov (United States)

    Hebeler-Barbosa, Flavia; Morais, Flavia V.; Montenegro, Mario R.; Kuramae, Eiko E.; Montes, Beatriz; McEwen, Juan G.; Bagagli, Eduardo; Puccia, Rosana

    2003-01-01

    Paracoccidioides brasiliensis isolates from 10 nine-banded armadillos (Dasypus novemcinctus) were comparable with 19 clinical isolates by sequence analysis of the PbGP43 gene and ribosomal internal transcribed spacer 1 (ITS1) and ITS2 and by random amplified polymorphic DNA. In this original ITS study, eight isolates differed by one or three sites among five total substitution sites. PMID:14662970

  17. Intraspecific invariability of the internal transcribed spacer region of rDNA of the truffle Terfezia terfezioides in Europe.

    Science.gov (United States)

    Kovács, G M; Rudnóy, S; Vágvölgyi, C; Lásztity, D; Rácz, I; Bratek, Z

    2001-01-01

    ITS regions (internal transcribed spacers--ITS1 and ITS2--with the 5.8S gene of the nuclear rDNA) of 25 fruit body samples of Terfezia terfezioides, originating from Hungary and Italy, were compared. The amplification and sequencing of the ITS region was successful with both the ITS1-ITS4 and ITS1F-ITS4 primer pairs. No differences of the restriction fragment length polymorphism profiles were detected among 19 samples collected in one place at the same time. The sequences of the ITS region of 9 samples collected in different localities were highly invariable, differing in only two bases. Thus the intraspecific homogeneity of the ITS region seems to be an important species-specific characteristic of T. terfezioides in contrast to other Terfezia species. As the samples of the species were collected from different and distant localities of Europe, the ITS sequence of T. terfezioides can be considered a very conservative, reliable molecular marker of the fungus.

  18. Sequence Variation in the Ribosomal Internal Transcribed Spacers, Including the 5.8S rDNA, of Naegleria spp.

    Science.gov (United States)

    De Jonckheere, J F

    1998-09-01

    The ribosomal internal transcribed spacer (ITS), including the 5.8S rDNA, from the majority of the 11 described species of the amoeboflagellate Naegleria and from Willaertia magna have a size between 300 and 450 bp. In N. jadini and N. minor these products are approximately 750 bp long. The products from strains of the pathogenic N. fowleri vary between 323 and 423 bp. These length variations in N. fowleri are due to insertions of short repeats in the ITS1, causing the elongation of one stem-loop in the putative secondary structure. In all other species the sizes were identical from strains of the same species. In N. jadini and N. minor there are long inserts in the ITS2. Naegleria italica, N. clarki and N. galeacystis have shorter inserts in the ITS2. These inserts cause the elongation of one stem-loop in the putative secondary structure proposed for the ITS2. Because of the small differences in sequence between N. fowleri and N. lovaniensis the ITS does not provide target sequences for specifically identifying the pathogenic N. fowleri. However, differences in ITS1 do allow to distinguish different N. fowleri isolates. The ITS and 5.8S rDNA sequences will be of additional help in describing new Naegleria spp., which becomes more based on molecular data because morphological differences are scarce in these organisms. Copyright © 1998 Elsevier GmbH. All rights reserved.

  19. Genetic variations in the internal transcribed spacer and mitochondrial small subunit rRNA gene of Naegleria spp.

    Science.gov (United States)

    Zhou, Ling; Sriram, Rama; Visvesvara, Govinda S; Xiao, Lihua

    2003-01-01

    Naegleria spp. are widely distributed free-living amebas, but one species in the genus, N. fowleri, causes acute fulminant primary amebic meningoencephalitis in humans and other animals. Thus, it is important to differentiate N. fowleri from the rest in the genus of Naegleria, and to develop tools for the detection of intra-specific genetic variations. In this study, one isolate each of N. australiensis, N. gruberi, N. jadini, and N. lovaniensis and 22 isolates of N. fowleri were characterized at the internal transcribed spacers (ITS) and mitochondrial small subunit rRNA (mtSSU rRNA) gene. The mtSSU rRNA primers designed amplified DNA of all isolates, with distinct sequences obtained from all species examined. In contrast, the ITS primers only amplified DNA from N. lovaniensis and N. fowleri, with minor sequence differences between the two. Three genotypes of N. fowleri were found among the isolates analyzed in both the mtSSU rRNA gene and ITS. The extent of sequence variation was greater in the mtSSU rRNA gene, but the ITS had the advantage of length polymorphism. These data should be useful in the development of molecular tools for rapid species differentiation and genotyping of Naegleria spp.

  20. Molecular Identification of Isolated Fungi from Unopened Containers of Greek Yogurt by DNA Sequencing of Internal Transcribed Spacer Region

    Directory of Open Access Journals (Sweden)

    Irshad M. Sulaiman

    2014-06-01

    Full Text Available In our previous study, we described the development of an internal transcribed spacer (ITS1 sequencing method, and used this protocol in species-identification of isolated fungi collected from the manufacturing areas of a compounding company known to have caused the multistate fungal meningitis outbreak in the United States. In this follow-up study, we have analyzed the unopened vials of Greek yogurt from the recalled batch to determine the possible cause of microbial contamination in the product. A total of 15 unopened vials of Greek yogurt belonging to the recalled batch were examined for the detection of fungi in these samples known to cause foodborne illness following conventional microbiological protocols. Fungi were isolated from all of the 15 Greek yogurt samples analyzed. The isolated fungi were genetically typed by DNA sequencing of PCR-amplified ITS1 region of rRNA gene. Analysis of data confirmed all of the isolated fungal isolates from the Greek yogurt to be Rhizomucor variabilis. The generated ITS1 sequences matched 100% with the published sequences available in GenBank. In addition, these yogurt samples were also tested for the presence of five types of bacteria (Salmonella, Listeria, Staphylococcus, Bacillus and Escherichia coli causing foodborne disease in humans, and found negative for all of them.

  1. Systematic internal transcribed spacer sequence analysis for identification of clinical mold isolates in diagnostic mycology: a 5-year study.

    Science.gov (United States)

    Ciardo, Diana E; Lucke, Katja; Imhof, Alex; Bloemberg, Guido V; Böttger, Erik C

    2010-08-01

    The implementation of internal transcribed spacer (ITS) sequencing for routine identification of molds in the diagnostic mycology laboratory was analyzed in a 5-year study. All mold isolates (n = 6,900) recovered in our laboratory from 2005 to 2009 were included in this study. According to a defined work flow, which in addition to troublesome phenotypic identification takes clinical relevance into account, 233 isolates were subjected to ITS sequence analysis. Sequencing resulted in successful identification for 78.6% of the analyzed isolates (57.1% at species level, 21.5% at genus level). In comparison, extended in-depth phenotypic characterization of the isolates subjected to sequencing achieved taxonomic assignment for 47.6% of these, with a mere 13.3% at species level. Optimization of DNA extraction further improved the efficacy of molecular identification. This study is the first of its kind to testify to the systematic implementation of sequence-based identification procedures in the routine workup of mold isolates in the diagnostic mycology laboratory.

  2. Systematic Internal Transcribed Spacer Sequence Analysis for Identification of Clinical Mold Isolates in Diagnostic Mycology: a 5-Year Study▿ †

    Science.gov (United States)

    Ciardo, Diana E.; Lucke, Katja; Imhof, Alex; Bloemberg, Guido V.; Böttger, Erik C.

    2010-01-01

    The implementation of internal transcribed spacer (ITS) sequencing for routine identification of molds in the diagnostic mycology laboratory was analyzed in a 5-year study. All mold isolates (n = 6,900) recovered in our laboratory from 2005 to 2009 were included in this study. According to a defined work flow, which in addition to troublesome phenotypic identification takes clinical relevance into account, 233 isolates were subjected to ITS sequence analysis. Sequencing resulted in successful identification for 78.6% of the analyzed isolates (57.1% at species level, 21.5% at genus level). In comparison, extended in-depth phenotypic characterization of the isolates subjected to sequencing achieved taxonomic assignment for 47.6% of these, with a mere 13.3% at species level. Optimization of DNA extraction further improved the efficacy of molecular identification. This study is the first of its kind to testify to the systematic implementation of sequence-based identification procedures in the routine workup of mold isolates in the diagnostic mycology laboratory. PMID:20573873

  3. Identification of forensically important Chrysomya (Diptera: Calliphoridae) species using the second ribosomal internal transcribed spacer (ITS2).

    Science.gov (United States)

    Nelson, Leigh A; Wallman, James F; Dowton, Mark

    2008-05-20

    The identification of forensically important blowflies of the genus Chrysomya (Diptera: Calliphoridae) may be hampered by their close morphological similarities, especially as immatures. In contrast to most previous studies, the utility of a nuclear rather than mitochondrial genetic marker was investigated to solve this problem. The second internal transcribed spacer (ITS2) of ribosomal DNA (rDNA) was amplified and sequenced from all nine Chrysomya species known from Australia. Difficulties encountered with direct sequencing of ITS2 for Chrysomya flavifrons necessitated cloning prior to sequencing for this species, which revealed a low level (0-0.23%) of intraindividual variation. Five restriction enzymes (DraI, BsaXI, BciVI, AseI and HinfI) were identified that were able to differentiate most members of the genus by polymerase chain reaction (PCR) restriction fragment length polymorphism (PCR-RFLP). The PCR-RFLP analysis revealed characteristic restriction profiles for all species except the closely related species pairs Chrysomya latifrons+Chrysomya semimetallica and Chrysomya incisuralis+Chrysomya rufifacies. Ch. incisuralis and Ch. rufifacies were able to be separated using the size differences resulting from amplification of the entire ITS region. The lack of intraspecific ITS2 sequence variation among eight Ch. incisuralis specimens was verified by the identical restriction profiles generated from these specimens. A DNA-based approach, such as PCR-RFLP, has the capacity to be useful for the identification of forensic entomological evidence in cases where morphological characters are unreliable.

  4. Saprolegniaceae identified on amphibian eggs throughout the Pacific Northwest, USA, by internal transcribed spacer sequences and phylogenetic analysis.

    Science.gov (United States)

    Petrisko, Jill E; Pearl, Christopher A; Pilliod, David S; Sheridan, Peter P; Williams, Charles F; Peterson, Charles R; Bury, R Bruce

    2008-01-01

    We assessed the diversity and phylogeny of Saprolegniaceae on amphibian eggs from the Pacific Northwest, with particular focus on Saprolegnia ferax, a species implicated in high egg mortality. We identified isolates from eggs of six amphibians with the internal transcribed spacer (ITS) and 5.8S gene regions and BLAST of the GenBank database. We identified 68 sequences as Saprolegniaceae and 43 sequences as true fungi from at least nine genera. Our phylogenetic analysis of the Saprolegniaceae included isolates within the genera Saprolegnia, Achlya and Leptolegnia. Our phylogeny grouped S. semihypogyna with Achlya rather than with the Saprolegnia reference sequences. We found only one isolate that grouped closely with S. ferax, and this came from a hatchery-raised salmon (Idaho) that we sampled opportunistically. We had representatives of 7-12 species and three genera of Saprolegniaceae on our amphibian eggs. Further work on the ecological roles of different species of Saprolegniaceae is needed to clarify their potential importance in amphibian egg mortality and potential links to population declines.

  5. Variation in the nuclear ribosomal DNA internal transcribed spacer (ITS) region of Pinus rzedowskii revealed by PCR-RFLP.

    Science.gov (United States)

    Quijada, A; Liston, A; Delgado, P; Vázquez-Lobo, A; Alvarez-Buylla, E R

    1998-03-01

    In the genus Pinus the internal transcribed spacers (ITS1 and ITS2) and the 5.8s region of the nuclear ribosomal DNA are approximately 3000 bp in length. ITS1 is considerably longer than ITS2 and partial sequences of ITS1 indicate that this region is evolving rapidly and exhibits intraspecific variation. The ITS2 and 5.8s regions are relatively conserved. We surveyed restriction fragment length variability of PCR-amplified fragments (PCR-RFLP) of the ITS region in four populations (86 individuals) of Pinus rzedowskii, a pine endemic to western Michoacán, Mexico. Five of the restriction endonucleases assayed revealed variation, with a total of 13 variants, most of which were length mutations of 300-900 bp. A moderate degree of population differentiation was detected. The average diversity (Shannon's index) of ITS fragment size patterns was 1.19, with 34% of the variation due to differences among populations and 66% due to differences among individuals within populations. The same individuals were assayed for nine polymorphic isozymes, which gave diversity measures similar to those of each restriction endonuclease.

  6. Intragenomic variation of the rDNA internal transcribed spacers in sponges (Phylum Porifera): implications for phylogenetic studies.

    Science.gov (United States)

    Wörheide, Gert; Nichols, Scott A; Goldberg, Julia

    2004-12-01

    The internal transcribed spacer regions (ITS1 and ITS2) of the tandemly repeated nuclear ribosomal DNA clusters are frequently used as markers for fine scale analyses in diverse animals. In certain taxa, ITS is nearly exclusively used for population level or inter-specific studies, despite the frequent presence of divergent paralogs within individual genomes that can be phylogenetically misleading. For the first time we survey diverse marine sponges to determine the extent and phylogenetic implications of intragenomic polymorphisms (IGPs) exhibited at their ITS loci. We discover that the extent of IGP varies greatly between taxa (with most taxa exhibiting very few) and cannot be predicted by taxonomy. Furthermore, we demonstrate that ITS can be phylogenetically informative between species when moderate levels of IGPs are detected, but that ITS paralogy can interfere with population level studies. We caution against the routine use of ITS in phylogenetic studies of sponges without (1) screening for IGPs in specimens from every population sampled; (2) including all divergent paralogs in phylogenetic analyses; (3) testing ITS data using other single-copy, unlinked loci (such as nuclear introns).

  7. A PCR method targeting internal transcribed spacers: the simultaneous detection of Babesia bigemina and Babesia bovis in cattle.

    Science.gov (United States)

    Liu, Junlong; Guan, Guiquan; Liu, Aihong; Li, Youquan; Yin, Hong; Luo, Jianxun

    2014-03-01

    In this study, two pairs of oligonucleotide primers were designed according to the nucleotide sequence of the internal transcribed spacers (ITSs) of Babesia bigemina and B. bovis isolates from China. The primers were used in a multiplex PCR to detect parasite DNA in blood samples from cattle. There was no cross reactions with B. ovata, B. major, B. sp. Kashi, Theileria annulata, T. sergenti, T. sinensis or normal bovine DNA. The sensitivity of multiplex PCR assay was 1 pg and 10 pg DNA for B. bigemina and B. bovis, respectively. A total of 260 field blood samples collected from cattle in five provinces of China were analyzed by multiplex PCR and light microscopy. PCR testing revealed that 7.3% (19/260) and 5.8% (15/260) of cattle were positive for B. bigemina and B. bovis and 1.2% (3/260) of cattle were co-infected with B. bigemina and B. bovis. Using light microscopy, 2.3% (6/260) and 1.5% (4/260) of cattle were infected by B. bigemina and B. bovis, respectively, and no co-infection was found. The results showed that the multiplex PCR developed in the present study could be an alternative diagnostic tool for the detection of B. bovis and B. bigemina infection in cattle.

  8. Essential Oil Composition and Internal Transcribed Spacer (ITS Sequence Variability of Four South-Croatian Satureja Species (Lamiaceae

    Directory of Open Access Journals (Sweden)

    2009-02-01

    Full Text Available The purpose of this study was to compare the essential oil profiles of four South-Croatian Satureja species, as determined by GC/FID and GC/MS, with their DNA sequences for an internal transcribed spacer (ITS1-5.8S-ITS2 of the nuclear ribosomal DNA. A phylogenetic analysis showed that S. montana and S. cuneifolia, characterized by a similar essential oil composition, rich in the monoterpene hydrocarbon carvacrol, clustered together with high and moderate bootstrap support. On the contrary, S. subspicata and S. visianii, characterized by quite unique essential oil compositions, clustered together with the moderate bootstrap support. All four Croatian Satureja species clustered in one clade, separately from Macaronesian S. hortensis,although it had essential oil composition similar to that of S. montana and S. cuneifolia. This is the first report on the comparison between the phytochemical and DNA sequence data in Satureja species and useful contribution to the better understanding of interspecies relationships in this genus.

  9. A survey of nuclear ribosomal internal transcribed spacer substitution rates across angiosperms: an approximate molecular clock with life history effects

    Science.gov (United States)

    Kay, Kathleen M; Whittall, Justen B; Hodges, Scott A

    2006-01-01

    Background A full understanding of the patterns and processes of biological diversification requires the dating of evolutionary events, yet the fossil record is inadequate for most lineages under study. Alternatively, a molecular clock approach, in which DNA or amino acid substitution rates are calibrated with fossils or geological/climatic events, can provide indirect estimates of clade ages and diversification rates. The utility of this approach depends on the rate constancy of molecular evolution at a genetic locus across time and across lineages. Although the nuclear ribosomal internal transcribed spacer region (nrITS) is increasingly being used to infer clade ages in plants, little is known about the sources or magnitude of variation in its substitution rate. Here, we systematically review the literature to assess substitution rate variation in nrITS among angiosperms, and we evaluate possible correlates of the variation. Results We summarize 28 independently calibrated nrITS substitution rates ranging from 0.38 × 10-9 to 8.34 × 10-9 substitutions/site/yr. We find that herbaceous lineages have substitution rates almost twice as high as woody plants, on average. We do not find any among-lineage phylogenetic constraint to the rates, or any effect of the type of calibration used. Within life history categories, both the magnitude of the rates and the variance among rates tend to decrease with calibration age. Conclusion Angiosperm nrITS substitution rates vary by approximately an order of magnitude, and some of this variation can be attributed to life history categories. We make cautious recommendations for the use of nrITS as an approximate plant molecular clock, including an outline of more appropriate phylogenetic methodology and caveats against over interpretation of results. We also suggest that for lineages with independent calibrations, much of the variation in nrITS substitution rates may come from uncertainty in calibration date estimates, highlighting

  10. Low variation in ribosomal DNA and internal transcribed spacers of the symbiotic fungi of leaf-cutting ants (Attini: Formicidae

    Directory of Open Access Journals (Sweden)

    Silva-Pinhati A.C.O.

    2004-01-01

    Full Text Available Leaf-cutting ants of the genera Atta and Acromyrmex (tribe Attini are symbiotic with basidiomycete fungi of the genus Leucoagaricus (tribe Leucocoprineae, which they cultivate on vegetable matter inside their nests. We determined the variation of the 28S, 18S, and 5.8S ribosomal DNA (rDNA gene loci and the rapidly evolving internal transcribed spacers 1 and 2 (ITS1 and ITS2 of 15 sympatric and allopatric fungi associated with colonies of 11 species of leafcutter ants living up to 2,600 km apart in Brazil. We found that the fungal rDNA and ITS sequences from different species of ants were identical (or nearly identical to each other, whereas 10 GenBank Leucoagaricus species showed higher ITS variation. Our findings suggest that Atta and Acromyrmex leafcutters living in geographic sites that are very distant from each other cultivate a single fungal species made up of closely related lineages of Leucoagaricus gongylophorus. We discuss the strikingly high similarity in the ITS1 and ITS2 regions of the Atta and Acromyrmex symbiotic L. gongylophorus studied by us, in contrast to the lower similarity displayed by their non-symbiotic counterparts. We suggest that the similarity of our L. gongylophorus isolates is an indication of the recent association of the fungus with these ants, and propose that both the intense lateral transmission of fungal material within leafcutter nests and the selection of more adapted fungal strains are involved in the homogenization of the symbiotic fungal stock.

  11. Pathogenicity, Internal Transcribed Spacer-rDNA Variation, and Human Dispersal of Ceratocystis fimbriata on the Family Araceae.

    Science.gov (United States)

    Thorpe, Daniel J; Harrington, Thomas C; Uchida, Janice Y

    2005-03-01

    ABSTRACT Ceratocystis fimbriata is a complex of many cryptic, host-specialized species that causes wilt and canker of woody species and rot diseases of storage roots and corms of many economically important plants worldwide. With the exception of the family Araceae, all confirmed hosts of C. fimbriata are dicotyledonous plants. We hypothesized that the isolates from members of the family Araceae would form a monophyletic lineage specialized to infect these unique hosts. Analyses of sequences of the internal transcribed spacer (ITS) region of nuclear rDNA indicate that isolates and herbarium specimens of C. fimbriata from the family Araceae represent three different groups: an Xanthosoma/Syngonium group on corms of Xanthosoma spp. from the Caribbean region and on ornamental S. podophyllum from greenhouses in Florida, Hawaii, Australia, and Brazil; an inhame group on corms of Colocasia esculenta in Brazil; and a distantly related taro group on Colocasia esculenta in Hawaii and China and on X. sagittifolium in Fiji. Inoculations of three species of Araceae (Caladium bicolor, S. podophyllum, and Colocasia esculenta) showed that isolates from all three groups are pathogenic to these three hosts. Brazilian isolates from Mangifera indica and Ficus carica were only weakly pathogenic to Caladium and Syngonium sp. and were not pathogenic to Colocasia sp. Syngonium plants appeared to be most susceptible to isolates of the Xanthosoma/Syngonium group, and Colocasia plants were least susceptible to isolates from Syngonium spp. Thus, it appears that adaptations to the family Araceae have evolved more than once in the C. fimbriata complex. It is hypothesized that the three groups of C. fimbriata on the family Araceae are native to the Caribbean, Brazil, and Asia, respectively, but they have been spread elsewhere by humans.

  12. DNA authentication of Plantago Herb based on nucleotide sequences of 18S-28S rRNA internal transcribed spacer region.

    Science.gov (United States)

    Sahin, Fatma Pinar; Yamashita, Hiromi; Guo, Yahong; Terasaka, Kazuyoshi; Kondo, Toshiya; Yamamoto, Yutaka; Shimada, Hiroshi; Fujita, Masao; Kawasaki, Takeshi; Sakai, Eiji; Tanaka, Toshihiro; Goda, Yukihiro; Mizukami, Hajime

    2007-07-01

    Internal transcribed spacer (ITS) regions of nuclear ribosomal RNA gene were amplified from 23 plant- and herbarium specimens belonging to eight Plantago species (P. asiatica, P. depressa, P. major, P. erosa, P. hostifolia, P. camtschatica, P. virginica and P. lanceolata). Sequence comparison indicated that these Plantago species could be identified based on the sequence type of the ITS locus. Sequence analysis of the ITS regions amplified from the crude drug Plantago Herb obtained in the markets indicated that all the drugs from Japan were derived from P. asiatica whereas the samples obtained in China were originated from various Plantago species including P. asiatica, P. depressa, P. major and P. erosa.

  13. Molecular Characterization of Fasciola Samples Using Sequences of Second Internal Transcribed Spacer-rDNA in Different Geographical Localities of Sistan and Balouchestan Province, Iran

    Directory of Open Access Journals (Sweden)

    Mahsa Shahbakhsh

    2016-02-01

    Full Text Available Background: The Fasciola trematodes are the most common liver flukes, living in a range of animals with global distribution and resulting in profound economic loss and public health challenges. Previous studies have indicated that the sequences of the second internal transcribed spacer (ITS-2 of ribosomal DNA (rDNA provide reliable genetic markers for molecular systemic studies of Fasciola. Objectives: The objective of the present study was to characterize Fasciola samples from different geographical regions of Sistan and Balouchestan province using sequences of second internal transcribed spacer (ITS-2 of ribosomal DNA (rDNA. Materials and Methods: Twenty adult trematodes were collected from the livers of slaughtered infected cattle. Total genomic DNA was extracted and ITS-2 rDNA targets were amplified by polymerase chain reaction (PCR. All samples were sequenced and investigated using the ClustalW2 sequence alignment tool and MEGA software. The sequences of some Iranian and non-Iranian isolates were used for comparison, in order to evaluate the variation in sequence homology between geographically different trematode populations. Results: The results of comparing the ITS-2 sequences with the BLAST GenBank database showed one type of sequence for F. hepatica and three different types of sequences for F. gigantica in the specimens. Conclusions: The present study demonstrated that Fasciola samples from cattle in two geographical locations in Sistan and Balouchestan province represented no genetic diversity in F. hepatica and high genetic variation in F. gigantica.

  14. Sequence, secondary structure, and phylogenetic analyses of the ribosomal internal transcribed spacer 2 (ITS2) in members of the North American Signifera Group of Orthopodomyia (Diptera: Culicidae).

    Science.gov (United States)

    Byrd, Brian D; Harrison, Bruce A; Zavortink, Thomas J; Wesson, Dawn M

    2012-11-01

    Mosquitoes of the genus Orthopodomyia (Diptera: Culicidae) are little known and of uncertain epidemiological importance. In the United States, there are three Orthopodomyia species (i.e., Or. signifera (Coquillett), Or. alba Baker, and Or. kummi Edwards); they are all members of the Signifera Group based on the current morphological taxonomy. In the course of identifying recently collected specimens, a problem was found with the current key morphological characters for separating the fourth instar larvae of Or. signifera and Or. kummi. Internal transcribed spacer two sequences of the rDNA were obtained to resolve the identities. The Orthopodomyia internal transcribed spacer two ranged in size from 193 (Or. kummi) to 244 bp (Or. signifera) (mean = 218 bp) and were slightly Adenine/Thymine enriched (44.7% Guanine/Cytosine on average). Putative secondary structures reveal structural homologies (four domains) consistent between species that also feature conserved sequences specific to mosquitoes (e.g., a conserved motif on the 3' aspect of the longest helix: GARTACATCC). Sequence analyses suggest that in certain areas of southwestern North America, hybridization may occur between Or. kummi and Or. signifera. Furthermore, our analyses confirm that Or. californica (a junior synonym of Or. signifera) is indeed Or. signifera. To our knowledge, this is the first sequence-based phylogenetic and molecular analysis of the Orthopodomyia.

  15. Polymorphism in the internal transcribed spacer (ITS of the ribosomal DNA of 26 isolates of ectomycorrhizal fungi

    Directory of Open Access Journals (Sweden)

    Gomes Eliane A.

    2002-01-01

    Full Text Available Inter- and intraspecific variation among 26 isolates of ectomycorrhizal fungi belonging to 8 genera and 19 species were evaluated by analysis of the internal transcribed sequence (ITS of the rDNA region using restriction fragment length polymorphism (RFLP. The ITS region was first amplified by polymerase chain reaction (PCR with specific primers and then cleaved with different restriction enzymes. Amplification products, which ranged between 560 and 750 base pairs (bp, were obtained for all the isolates analyzed. The degree of polymorphism observed did not allow proper identification of most of the isolates. Cleavage of amplified fragments with the restriction enzymes Alu I, Hae III, Hinf I, and Hpa II revealed extensive polymorphism. All eight genera and most species presented specific restriction patterns. Species not identifiable by a specific pattern belonged to two genera: Rhizopogon (R. nigrescens, R. reaii, R. roseolus, R. rubescens and Rhizopogon sp., and Laccaria (L. bicolor and L. amethystea. Our data confirm the potential of ITS region PCR-RFLP for the molecular characterization of ectomycorrhizal fungi and their identification and monitoring in artificial inoculation programs.

  16. Identification of Anopheles (Nyssorhynchus albitarsis complex species (Diptera: Culicidae using rDNA internal transcribed spacer 2-based polymerase chain reaction primes

    Directory of Open Access Journals (Sweden)

    Cong Li

    2005-08-01

    Full Text Available Anopheles (Nyssorhynchus marajoara is a proven primary vector of malaria parasites in Northeast Brazil, and An. deaneorum is a suspected vector in Western Brazil. Both are members of the morphologically similar Albitarsis Complex, which also includes An. albitarsis and an undescribed species, An. albitarsis "B". These four species were recognized and can be identified using random amplified polymorphic DNA (RAPD markers, but various other methodologies also point to multiple species under the name An. albitarsis. We describe here a technique for identification of these species employing polymerase chain reaction (PCR primers based on ribosomal DNA internal transcribed spacer 2 (rDNA ITS2 sequence. Since this method is based on known sequence it is simpler than the sometimes problematical RAPD-PCR. Primers were tested on samples previously identified using RAPD markers with complete correlation.

  17. Cyanobacterial ecotypes in different optical microenvironments of a 68 C hot spring mat community revealed by 16S-23S rRNA internal transcribed spacer region variation

    DEFF Research Database (Denmark)

    Ferris, Mike J.; Kühl, Michael; Wieland, Andrea

    2003-01-01

    We examined the population of unicellular cyanobacteria (Synechococcus) in the upper 3-mm vertical interval of a 68°C region of a microbial mat in a hot spring effluent channel (Yellowstone National Park, Wyoming). Fluorescence microscopy and microsensor measurements of O2 and oxygenic photosynth......We examined the population of unicellular cyanobacteria (Synechococcus) in the upper 3-mm vertical interval of a 68°C region of a microbial mat in a hot spring effluent channel (Yellowstone National Park, Wyoming). Fluorescence microscopy and microsensor measurements of O2 and oxygenic...... distinct populations over the vertical interval. We were unable to identify patterns in genetic variation in Synechococcus 16S rRNA sequences that correlate with different vertically distributed populations. However, patterns of variation at the internal transcribed spacer locus separating 16S and 23S r...

  18. Update on Pneumocystis carinii f. sp. hominis typing based on nucleotide sequence variations in internal transcribed spacer regions of rRNA genes

    DEFF Research Database (Denmark)

    Lee, C H; Helweg-Larsen, J; Tang, X

    1998-01-01

    Pneumocystis carinii f. sp. hominis isolates from 207 clinical specimens from nine countries were typed based on nucleotide sequence variations in the internal transcribed spacer regions I and II (ITS1 and ITS2, respectively) of rRNA genes. The number of ITS1 nucleotides has been revised from...... the previously reported 157 bp to 161 bp. Likewise, the number of ITS2 nucleotides has been changed from 177 to 192 bp. The number of ITS1 sequence types has increased from 2 to 15, and that of ITS2 has increased from 3 to 14. The 15 ITS1 sequence types are designated types A through O, and the 14 ITS2 types...... are named types a through n. A total of 59 types of P. carinii f. sp. hominis were found in this study....

  19. Nuclear ribosomal internal transcribed spacer 1 (ITS1) variation in the Anastrepha fraterculus cryptic species complex (Diptera, Tephritidae) of the Andean region

    Science.gov (United States)

    Sutton, Bruce D.; Steck, Gary J.; Norrbom, Allen L.; Rodriguez, Erick J.; Srivastava, Pratibha; Alvarado, Norma Nolazco; Colque, Fredy; Landa, Erick Yábar; Sánchez, Juan José Lagrava; Quisberth, Elizabeth; Peñaranda, Emilio Arévalo; Clavijo, P. A. Rodriguez; Alvarez-Baca, Jeniffer K.; Zapata, Tito Guevara; Ponce, Patricio

    2015-01-01

    Abstract The nuclear ribosomal internal transcribed spacer 1 (ITS1) was sequenced for Anastrepha fraterculus (Wiedemann, 1830) originating from 85 collections from the northern and central Andean countries of South America including Argentina (Tucumán), Bolivia, Perú, Ecuador, Colombia, and Venezuela. The ITS1 regions of additional specimens (17 collections) from Central America (México, Guatemala, Costa Rica, and Panamá), Brazil, Caribbean Colombia, and coastal Venezuela were sequenced and together with published sequences (Paraguay) provided context for interpretation. A total of six ITS1 sequence variants were recognized in the Andean region comprising four groups. Type I predominates in the southernmost range of Anastrepha fraterculus. Type II predominates in its northernmost range. In the central and northern Andes, the geographic distributions overlap and interdigitate with a strong elevational effect. A discussion of relationships between observed ITS1 types and morphometric types is included. PMID:26798259

  20. Functional analysis of transcribed spacers of yeast ribosomal DNA.

    Science.gov (United States)

    Musters, W; Boon, K; van der Sande, C A; van Heerikhuizen, H; Planta, R J

    1990-12-01

    Making use of an rDNA unit, containing oligonucleotide tags in both the 17S and 26S rRNA gene, we have analyzed the effect of various deletions in the External Transcribed Spacer (ETS) and in one of the Internal Transcribed Spacers 1 (ITS1) on the process of ribosome formation in yeast. By following the fate of the tagged transcripts of this rDNA unit in vivo by Northern hybridization we found that deleting various parts of the ETS prevents the accumulation of tagged 17S rRNA and its assembly into 40S subunits, but not the formation of 60S subunits. Deleting the central region of ITS1, including a processing site that is used in an early stage of the maturation process, was also found to prevent the accumulation of functional 49 S subunits, whereas no effect on the formation of 60S subunits was detected. The implications of these findings for yeast pre-rRNA processing are discussed.

  1. Six group I introns and three internal transcribed spacers in the chloroplast large subunit ribosomal RNA gene of the green alga Chlamydomonas eugametos.

    Science.gov (United States)

    Turmel, M; Boulanger, J; Schnare, M N; Gray, M W; Lemieux, C

    1991-03-20

    The chloroplast large subunit rRNA gene of Chlamydomonas eugametos and its 5' flanking region encoding tRNA(Ile) (GAU) and tRNA(Ala) (UGC) have been sequenced. The DNA sequence data along with the results of a detailed RNA analysis disclosed two unusual features of this green algal large subunit rRNA gene: (1) the presence of six group I introns (CeLSU.1-CeLSU.6) whose insertion positions have not been described previously, and (2) the presence of three short internal transcribed spacers that are post-transcriptionally excised to yield four rRNA species of 280, 52, 810 and 1720 nucleotides, positioned in this order (5' to 3') in the primary transcript. Together, these RNA species can assume a secondary structure that is almost identical to that proposed for the 23 S rRNA of Escherichia coli. All three internal transcribed spacers map to variable regions of primary sequence and/or potential secondary structure, whereas all six introns lie within highly conserved regions. The first three introns are inserted within the sequence encoding the 810 nucleotide rRNA species and map within domain II of the large subunit rRNA structure; the remaining introns, found in the sequence encoding the 1720 nucleotide rRNA species, lie within either domain IV or V, as is the case for all other large subunit rDNA introns that have been documented to date. CeLSU.5 and CeLSU.6 each contain a long open reading frame (ORF) of more than 200 codons. While the CeLSU.6 ORF is not related to any known ORFs, the CeLSU.5 ORF belongs to a family of ORFs that have been identified in Podospora and Neurospora mitochondrial group I introns. The finding that a polymorphic marker showing unidirectional gene conversion during crosses between C. eugametos and Chlamydomonas moewusii is located within the CeLSU.5 ORF makes it likely that this intron is a mobile element and that its ORF encodes a site-specific endonuclease promoting the transfer of the intron DNA sequence.

  2. Evolutionary history of Phakopsora pachyrhizi (the Asian soybean rust in Brazil based on nucleotide sequences of the internal transcribed spacer region of the nuclear ribosomal DNA

    Directory of Open Access Journals (Sweden)

    Maíra C. M. Freire

    2008-01-01

    Full Text Available Phakopsora pachyrhizi has dispersed globally and brought severe economic losses to soybean growers. The fungus has been established in Brazil since 2002 and is found nationwide. To gather information on the temporal and spatial patterns of genetic variation in P. pachyrhizi , we sequenced the nuclear internal transcribed spacer regions (ITS1 and ITS2. Total genomic DNA was extracted using either lyophilized urediniospores or lesions removed from infected leaves sampled from 26 soybean fields in Brazil and one field in South Africa. Cloning prior to sequencing was necessary because direct sequencing of PCR amplicons gave partially unreadable electrophoretograms with peak displacements suggestive of multiple sequences with length polymorphism. Sequences were determined from four clones per field. ITS sequences from African or Asian isolates available from the GenBank were included in the analyses. Independent sequence alignments of the ITS1 and ITS2 datasets identified 27 and 19 ribotypes, respectively. Molecular phylogeographic analyses revealed that ribotypes of widespread distribution in Brazil displayed characteristics of ancestrality and were shared with Africa and Asia, while ribotypes of rare occurrence in Brazil were indigenous. The results suggest P. pachyrhizi found in Brazil as originating from multiple, independent long-distance dispersal events.

  3. Molecular phylogeny and genetic variation in the genus Lilium native to China based on the internal transcribed spacer sequences of nuclear ribosomal DNA.

    Science.gov (United States)

    Du, Yun-peng; He, Heng-bin; Wang, Zhong-xuan; Li, Shuang; Wei, Chi; Yuan, Xiao-na; Cui, Qi; Jia, Gui-xia

    2014-03-01

    We present a comprehensive phylogeny derived from nuclear ribosomal DNA (nrDNA) for 214 samples representing 98 species and five varieties, including 44 species and five varieties native to China. Our collection of 25 species and five varieties (44 samples) covering all five sections of the genus (Comber) distributed in China also were included in the internal transcribed spacer (ITS) database. This study incorporates previous research with an emphasis on Chinese species, including the controversial subsection, Sinomartagon 5c Comber. In the phylogenetic tree obtained by maximum parsimony (PAUP) and maximum likelihood (RAxML) analyses, the samples were divided into four major groups. Our results suggest that the subsection (subsect.) 5c Comber should be classified into the true subsect. 5c and the section (sect.) Lophophorum. And the latter was divided into three subsections (subsect. Lophophorum I, subsect. Lophophorum II, and subsect. Lophophorum III). Based on molecular phylogenetic analysis and fluorescence in situ hybridization, we report that L. henryi and L. rosthornii are closely related, and we propose their classification into subsect. Leucolirion 6a. Our results support Comber's subdivision of sect. Leucolirion, which was primarily based on bulb color. Chinese species were divided into five sections: sect. Martagon, sect. Archelirion, sect. Leucolirion, sect. Sinomartagon, and sect. Lophophorum. These findings contribute to our understanding of the phylogeny, origin, and classification of Lilium.

  4. Secondary structure of nrDNA Internal Transcribed Spacers as a useful tool to align highly divergent species in phylogenetic studies

    Directory of Open Access Journals (Sweden)

    Giovanna C. Giudicelli

    Full Text Available Abstract Recently, it has been suggested that internal transcribed spacer (ITS sequences are under selective constraints to preserve their secondary structure. Here, we investigate the patterns of the ITS nucleotide and secondary structure conservation across the Passiflora L. genus to evaluate the potential use of secondary structure data as a helpful tool for the alignment in taxonomically complex genera. Considering the frequent use of ITS, this study also presents a perspective on future analyses in other plant groups. The ITS1 and ITS2 sequences presented significant differences for mean values of the lowest energy state (LES and for number of hairpins in different Passiflora subgenera. Statistical analyses for the subgenera separately support significant differences between the LES values and the total number of secondary structures for ITS. In order to evaluate whether the LES values of ITS secondary structures were related to selective constraints, we compared these results among 120 ITS sequences from Passiflora species and 120 randomly generated sequences. These analyses indicated that Passiflora ITS sequences present characteristics of a region under selective constraint to maintain the secondary structure showing to be a promising tool to improve the alignments and identify sites with non-neutral substitutions or those correlated evolutionary steps.

  5. Systematics of marine brown alga Sargassum from Thailand: A preliminary study based on morphological data and nuclear ribosomal internal transcribed spacer 2 (ITS2) sequences

    Science.gov (United States)

    Kantachumpoo, Attachai; Uwai, Shinya; Noiraksar, Thidarat; Komatsu, Teruhisa

    2015-06-01

    The marine brown algal genus Sargassum has been investigated extensively based on genetic information. In this report, we performed the first comparative study of morphological and molecular data among common species of Sargassum found in Thailand and explored the phylogenetic diversity within the genus. Our results revealed an incongruent pattern for species classification in Thai Sargassum. Morphologically, our Sargassum specimens were distinguishable and represented 8 species, namely, S. aquifolium (Turner) C.Agardh, Sargassum baccularia (Mertens) C. Agardh, S. cinereum J. Agardh, S. ilicifolium (Turner) C.Agardh, S. oligocystum Montagne, S. plagiophyllum C. Agardh, S. polycystum C. Agardh and S. swartzii (Turuner) C. Agardh. In contrast, using three different methods, phylogenetic analysis of nuclear ribosomal internal transcribed spacer 2 (ITS2) revealed six distinct clades, including S. baccularia/ S. oligosyntum clade, S. aquifolium/ S. swartzii clade, S. cinereum clade, S. aquifolium/ S. ilicifolium clade, S. polycystum clade, and S. plagiophyllum clade, which was suggestive of a phenotypic plasticity species complex. Our molecular data also confirmed the paraphyletic relationship in the section Binderianae and suggested that this section requires reassessment. Overall, further studies are required to increase our understanding of the taxonomy, phylogenetic relationships and species boundaries among Sargassum species in Thailand.

  6. Analysis of the 5.8S rRNA gene and the internal transcribed spacers in Naegleria spp. and in N. fowleri.

    Science.gov (United States)

    Pélandakis, M; Serre, S; Pernin, P

    2000-01-01

    Internal transcribed spacers (ITS) and the 5.8S ribosomal gene of 21 Naegleria fowleri strains and eight other species including Naegleria gruberi were sequenced. The results showed that this region can help differentiate between and within species. The phylogeny of Naegleria spp. deduced from the ITS and the 5.8S gene produced four major lineages, fowleri-lovaniensis, galeacystis-italica-clarki-gruberi-australiensis, andersoni-jamiesoni, and pussardi, that fit perfectly with those inferred from the 18S rRNA gene analysis. The N. gruberi isolate, NG260, was closely related to Naegleria pussardi. The other N. gruberi isolates branched together with Naegleria australiensis in another lineage. The ITS and 5.8S results for N. fowleri were congruent with those previously deduced by RAPD analysis. The phylogenetic analysis inferred from ITS and RAPD data revealed two major groups. The French Cattenom and Chooz and South Pacific strains constituted the first group. The second group encompassed the strains corresponding to the Euro-American and Widespread RAPD variants and shared the same substitution in the 5.8S gene. In addition, it was possible to define species specific primers in ITS regions to rapidly identify N. fowleri.

  7. Diversity of 16S-23S rDNA internal transcribed spacer (ITS reveals phylogenetic relationships in Burkholderia pseudomallei and its near-neighbors.

    Directory of Open Access Journals (Sweden)

    Andrew P Liguori

    Full Text Available Length polymorphisms within the 16S-23S ribosomal DNA internal transcribed spacer (ITS have been described as stable genetic markers for studying bacterial phylogenetics. In this study, we used these genetic markers to investigate phylogenetic relationships in Burkholderia pseudomallei and its near-relative species. B. pseudomallei is known as one of the most genetically recombined bacterial species. In silico analysis of multiple B. pseudomallei genomes revealed approximately four homologous rRNA operons and ITS length polymorphisms therein. We characterized ITS distribution using PCR and analyzed via a high-throughput capillary electrophoresis in 1,191 B. pseudomallei strains. Three major ITS types were identified, two of which were commonly found in most B. pseudomallei strains from the endemic areas, whereas the third one was significantly correlated with worldwide sporadic strains. Interestingly, mixtures of the two common ITS types were observed within the same strains, and at a greater incidence in Thailand than Australia suggesting that genetic recombination causes the ITS variation within species, with greater recombination frequency in Thailand. In addition, the B. mallei ITS type was common to B. pseudomallei, providing further support that B. mallei is a clone of B. pseudomallei. Other B. pseudomallei near-neighbors possessed unique and monomorphic ITS types. Our data shed light on evolutionary patterns of B. pseudomallei and its near relative species.

  8. Molecular phylogeny of 21 tropical bamboo species reconstructed by integrating non-coding internal transcribed spacer (ITS1 and 2) sequences and their consensus secondary structure.

    Science.gov (United States)

    Ghosh, Jayadri Sekhar; Bhattacharya, Samik; Pal, Amita

    2017-06-01

    The unavailability of the reproductive structure and unpredictability of vegetative characters for the identification and phylogenetic study of bamboo prompted the application of molecular techniques for greater resolution and consensus. We first employed internal transcribed spacer (ITS1, 5.8S rRNA and ITS2) sequences to construct the phylogenetic tree of 21 tropical bamboo species. While the sequence alone could grossly reconstruct the traditional phylogeny amongst the 21-tropical species studied, some anomalies were encountered that prompted a further refinement of the phylogenetic analyses. Therefore, we integrated the secondary structure of the ITS sequences to derive individual sequence-structure matrix to gain more resolution on the phylogenetic reconstruction. The results showed that ITS sequence-structure is the reliable alternative to the conventional phenotypic method for the identification of bamboo species. The best-fit topology obtained by the sequence-structure based phylogeny over the sole sequence based one underscores closer clustering of all the studied Bambusa species (Sub-tribe Bambusinae), while Melocanna baccifera, which belongs to Sub-Tribe Melocanneae, disjointedly clustered as an out-group within the consensus phylogenetic tree. In this study, we demonstrated the dependability of the combined (ITS sequence+structure-based) approach over the only sequence-based analysis for phylogenetic relationship assessment of bamboo.

  9. Phylogenetic inferences on the relationship of North American and European Picea species based on nuclear ribosomal 18S sequences and the internal transcribed spacer 1 region.

    Science.gov (United States)

    Smith, D E; Klein, A S

    1994-03-01

    We have used PCR (polymerase chain reaction) to isolate nuclear ribosomal sequences from seven species of Picea (spruce). The amplified products contained approximately 200 base pairs from the 3' end of the 18S rRNA gene and the entire first internal transcribed spacer (ITS1). The sequences from these two functionally distinct regions were aligned and variable positions were used to construct a character matrix for cladistic-based phylogenetic analysis. Short insertions or deletions (indels) were common in the ITS1 and distinguished some intragenus phylogenetic relationships. In the present study, evolutionary relationships, based on DNA sequence variation within the ribosomal repeat, were determined for seven North American and European species of Picea. The results support the hypothesis of Wright (1955) that P. rubens and P. mariana are more closely related to the European species P. omorika than to other North American Picea. Molecular data suggest P. pungens has a closer relationship to eastern North American and European Picea than its presumed affiliation with northwestern American species.

  10. Multigene-based analyses of the phylogenetic evolution of oligotrich ciliates, with consideration of the internal transcribed spacer 2 secondary structure of three systematically ambiguous genera.

    Science.gov (United States)

    Li, Jiamei; Liu, Weiwei; Gao, Shan; Warren, Alan; Song, Weibo

    2013-03-01

    Oligotrichs are ciliates of great abundance, but their molecular systematics are rarely studied. In this study, nine species representing three genera (Strombidium, Novistrombidium, and Omegastrombidium) of marine oligotrich ciliates were collected from coastal waters of China. The small subunit (SSU) rRNA gene of two species and the internal transcribed spacers and 5.8S region (ITS1-5.8S-ITS2) for all nine species were sequenced for the first time. Phylogenetic trees using both the SSU rRNA gene and ITS1-5.8S-ITS2 region sequences were generated. In addition, the secondary structures of ITS2 RNA transcripts of 11 taxa representing four genera (Novistrombidium, Strombidium, Omegastrombidium, and Laboea) were investigated. The phylogenetic analyses show that (i) the family Strombidiidae is polyphyletic, (ii) the genus Novistrombidium is probably paraphyletic, containing at least two subclades, which is consistent with recent cladistic analyses based on morphological data, and (iii) the tail-less genus Laboea is separate from other genera of Strombidiidae, clustering instead with the tontoniids. Comparisons of the secondary structure of ITS2 regions also show that Laboea is clearly different from other strombidiids. These findings cast doubt on the monophyly of the family Strombidiidae.

  11. Development and evaluation of specific PCR primers targeting the ribosomal DNA-internal transcribed spacer (ITS) region of peritrich ciliates in environmental samples

    Science.gov (United States)

    Su, Lei; Zhang, Qianqian; Gong, Jun

    2017-07-01

    Peritrich ciliates are highly diverse and can be important bacterial grazers in aquatic ecosystems. Morphological identifications of peritrich species and assemblages in the environment are time-consuming and expertise-demanding. In this study, two peritrich-specific PCR primers were newly designed to amplify a fragment including the internal transcribed spacer (ITS) region of ribosomal rDNA from environmental samples. The primers showed high specificity in silico, and in tests with peritrich isolates and environmental DNA. Application of these primers in clone library construction and sequencing yielded exclusively sequences of peritrichs for water and sediment samples. We also found the ITS1, ITS2, ITS, D1 region of 28S rDNA, and ITS+D1 region co-varied with, and generally more variable than, the V9 region of 18S rDNA in peritrichs. The newly designed specific primers thus provide additional tools to study the molecular diversity, community composition, and phylogeography of these ecologically important protists in different systems.

  12. Novel polymerase chain reaction-restriction fragment length polymorphism assay to determine internal transcribed spacer-2 group in the Chagas disease vector, Triatoma dimidiata (Latreille, 1811

    Directory of Open Access Journals (Sweden)

    Bethany Richards

    2013-06-01

    Full Text Available Triatoma dimidiata is the most important Chagas disease insect vector in Central America as this species is primarily responsible for Trypanosoma cruzi transmission to humans, the protozoan parasite that causes Chagas disease. T. dimidiata sensu lato is a genetically diverse assemblage of taxa and effective vector control requires a clear understanding of the geographic distribution and epidemiological importance of its taxa. The nuclear ribosomal internal transcribed spacer 2 (ITS-2 is frequently used to infer the systematics of triatomines. However, oftentimes amplification and sequencing of ITS-2 fails, likely due to both the large polymerase chain reaction (PCR product and polymerase slippage near the 5' end. To overcome these challenges we have designed new primers that amplify only the 3'-most 200 base pairs of ITS-2. This region distinguishes the ITS-2 group for 100% of known T. dimidiata haplotypes. Furthermore, we have developed a PCR-restriction fragment length polymorphism (RFLP approach to determine the ITS-2 group, greatly reducing, but not eliminating, the number of amplified products that need to be sequenced. Although there are limitations with this new PCR-RFLP approach, its use will help with understanding the geographic distribution of T. dimidiata taxa and can facilitate other studies characterising the taxa, e.g. their ecology, evolution and epidemiological importance, thus improving vector control.

  13. Detection of sodium azide-induced mutagenicity in the regenerated shoots of artemisia annual L., using internal transcribed spacer (its) sequences of nrDNA

    International Nuclear Information System (INIS)

    Al-Qurainy, F.; Al-Hemaidi, F.M.; Khan, S.; Ali, M.A.; Tarroum, M.; Ashraf, M.

    2011-01-01

    Sodium azide (NaN/sub 3/) is a well known chemical mutagen which can effectively cause point mutation in plant genome. The mutagenicity by this potential mutagen was assessed in the regenerated mutant shoots of Artemisia annua using internal transcribed spacer (ITS) sequences of n rDNA. Insertions and/or deletions were detected in n rDNA-ITS sequences of all mutant shoots and compared with control ones using the ClustalX program. The regenerated shoots TS1 and TS2 had deleted bases, whereas TS3, TS4 and TS5 had insertions, because NaN/sub 3/ replaced the cytosine (C) by thymine (T) (C - T) (shoots; TS1 and TS4) and thymine (T) replaced by guanine (G) (T - G) (shoot; TS5), respectively. Artemisinin content was also measured in the regenerated six-week-old shoots of A. annua. All regenerated shoots had enhanced level of this compound as compared to that in the controls, being highest in the regenerated shoot TS3. (author)

  14. Nucleotide polymorphism in the 5.8S nrDNA gene and internal transcribed spacers in Phakopsora pachyrhizi viewed from structural models.

    Science.gov (United States)

    Freire, Maíra Cristina Menezes; da Silva, Maria Roméria; Zhang, Xuecheng; Almeida, Álvaro Manuel Rodrigues; Stacey, Gary; de Oliveira, Luiz Orlando

    2012-02-01

    The assessment of nucleotide polymorphisms in environmental samples of obligate pathogens requires DNA amplification through the polymerase chain reaction (PCR) and bacterial cloning of PCR products prior to sequencing. The drawback of this strategy is that it can give rise to false polymorphisms owing to DNA polymerase misincorporation during PCR or bacterial cloning. We investigated patterns of nucleotide polymorphism in the internal transcribed spacer (ITS) region for Phakopsora pachyrhizi, an obligate biotrophic fungus that causes the Asian soybean rust. Field-collected samples of P. pachyrhizi were obtained from all major soybean production areas worldwide, including Brazil and the United States. Bacterially-cloned, PCR products were obtained using a high fidelity DNA polymerase. A total of 370 ITS sequences that were subjected to an array of complementary sequence analyses, which included analyses of secondary structure stability, the pattern of nucleotide polymorphisms, GC content, and the presence of conserved motifs. The sequences exhibited features of functional rRNAs. Overall, polymorphisms took place within less conserved motives, such as loops and bulges; alternatively, they gave rise to non-canonical G-U pairs within conserved regions of double stranded helices. We discuss the usefulness of structural analyses to filter out putative 'suspicious' bacterially cloned ITS sequences, thus keeping artificially-induced sequence variation to a minimum. Copyright © 2011 Elsevier Inc. All rights reserved.

  15. Sequence variation in nuclear ribosomal small subunit, internal transcribed spacer and large subunit regions of Rhizophagus irregularis and Gigaspora margarita is high and isolate-dependent.

    Science.gov (United States)

    Thiéry, Odile; Vasar, Martti; Jairus, Teele; Davison, John; Roux, Christophe; Kivistik, Paula-Ann; Metspalu, Andres; Milani, Lili; Saks, Ülle; Moora, Mari; Zobel, Martin; Öpik, Maarja

    2016-06-01

    Arbuscular mycorrhizal (AM) fungi are known to exhibit high intra-organism genetic variation. However, information about intra- vs. interspecific variation among the genes commonly used in diversity surveys is limited. Here, the nuclear small subunit (SSU) rRNA gene, internal transcribed spacer (ITS) region and large subunit (LSU) rRNA gene portions were sequenced from 3 to 5 individual spores from each of two isolates of Rhizophagus irregularis and Gigaspora margarita. A total of 1482 Sanger sequences (0.5 Mb) from 239 clones were obtained, spanning ~4370 bp of the ribosomal operon when concatenated. Intrasporal and intra-isolate sequence variation was high for all three regions even though variant numbers were not exhausted by sequencing 12-40 clones per isolate. Intra-isolate nucleotide variation levels followed the expected order of ITS > LSU > SSU, but the values were strongly dependent on isolate identity. Single nucleotide polymorphism (SNP) densities over 4 SNP/kb in the ribosomal operon were detected in all four isolates. Automated operational taxonomic unit picking within the sequence set of known identity overestimated species richness with almost all cut-off levels, markers and isolates. Average intraspecific sequence similarity values were 99%, 96% and 94% for amplicons in SSU, LSU and ITS, respectively. The suitability of the central part of the SSU as a marker for AM fungal community surveys was further supported by its level of nucleotide variation, which is similar to that of the ITS region; its alignability across the entire phylum; its appropriate length for next-generation sequencing; and its ease of amplification in single-step PCR. © 2016 John Wiley & Sons Ltd.

  16. Phylogenetic diversity of indigenous cowpea bradyrhizobia from soils in Japan based on sequence analysis of the 16S-23S rRNA internal transcribed spacer (ITS) region.

    Science.gov (United States)

    Sarr, Papa Saliou; Yamakawa, Takeo; Saeki, Yuichi; Guisse, Aliou

    2011-06-01

    Cowpea [Vigna unguiculata (L.) Walp.] is an important legume crop and yet its rhizobia have not been well characterized in many areas. In the present study, sequence analysis of the bacterial 16S-23S rRNA internal transcribed spacer (ITS) region was performed to characterize genetically 76 indigenous cowpea rhizobia from five different geographic regions (Okinawa, Miyazaki, Kyoto, Fukushima and Hokkaido) of Japan. The sequence analysis clustered all isolates in the genus Bradyrhizobium. They were conspecific with B. japonicum, B. yuanmingense, B. elkanii and Bradyrhizobium sp., although none of them grouped with B. liaoningense, B. canariense, B. betae or B. iriomotense. B. yuanmingense was only isolated from the southern region (Okinawa) where it achieved the highest frequency of 69%. B. japonicum was predominant at Miyazaki, Fukushima and Hokkaido with more than 60% of the isolates. B. elkanii was mainly recorded in the southern (Okinawa: 31%, Miyazaki: 33%) and middle (Kyoto: 33%) regions. This species was present at a very low frequency in Fukushima and absent in Hokkaido in the northern area. Bradyrhizobium sp. like-strains were absent in the southern part (Okinawa, Miyazaki) but were concentrated either in the middle regions with 67% of Kyoto isolates and 28% of Fukushima isolates, and in the northern region with 40% of the Hokkaido isolates. This study revealed a geographical distribution of cowpea bradyrhizobia which seemed to be related to the differences in the environmental characteristics (soil type and soil pH, temperature, climate, moisture) of the different regions in Japan. Copyright © 2011 Elsevier GmbH. All rights reserved.

  17. Relationships between 16S-23S rRNA gene internal transcribed spacer DNA and genomic DNA similarities in the taxonomy of phototrophic bacteria

    International Nuclear Information System (INIS)

    Okamura, K; Hisada, T; Takata, K; Hiraishi, A

    2013-01-01

    Rapid and accurate identification of microbial species is essential task in microbiology and biotechnology. In prokaryotic systematics, genomic DNA-DNA hybridization is the ultimate tool to determine genetic relationships among bacterial strains at the species level. However, a practical problem in this assay is that the experimental procedure is laborious and time-consuming. In recent years, information on the 16S-23S rRNA gene internal transcribed spacer (ITS) region has been used to classify bacterial strains at the species and intraspecies levels. It is unclear how much information on the ITS region can reflect the genome that contain it. In this study, therefore, we evaluate the quantitative relationship between ITS DNA and entire genomic DNA similarities. For this, we determined ITS sequences of several species of anoxygenic phototrophic bacteria belonging to the order Rhizobiales, and compared with DNA-DNA relatedness among these species. There was a high correlation between the two genetic markers. Based on the regression analysis of this relationship, 70% DNA-DNA relatedness corresponded to 92% ITS sequence similarity. This suggests the usefulness of the ITS sequence similarity as a criterion for determining the genospecies of the phototrophic bacteria. To avoid the effects of polymorphism bias of ITS on similarities, PCR products from all loci of ITS were used directly as genetic probes for comparison. The results of ITS DNA-DNA hybridization coincided well with those of genomic DNA-DNA relatedness. These collective data indicate that the whole ITS DNA-DNA similarity can be used as an alternative to genomic DNA-DNA similarity.

  18. Re-mind the gap! Insertion - deletion data reveal neglected phylogenetic potential of the nuclear ribosomal internal transcribed spacer (ITS of fungi.

    Directory of Open Access Journals (Sweden)

    László G Nagy

    Full Text Available Rapidly evolving, indel-rich phylogenetic markers play a pivotal role in our understanding of the relationships at multiple levels of the tree of life. There is extensive evidence that indels provide conserved phylogenetic signal, however, the range of phylogenetic depths for which gaps retain tree signal has not been investigated in detail. Here we address this question using the fungal internal transcribed spacer (ITS, which is central in many phylogenetic studies, molecular ecology, detection and identification of pathogenic and non-pathogenic species. ITS is repeatedly criticized for indel-induced alignment problems and the lack of phylogenetic resolution above species level, although these have not been critically investigated. In this study, we examined whether the inclusion of gap characters in the analyses shifts the phylogenetic utility of ITS alignments towards earlier divergences. By re-analyzing 115 published fungal ITS alignments, we found that indels are slightly more conserved than nucleotide substitutions, and when included in phylogenetic analyses, improved the resolution and branch support of phylogenies across an array of taxonomic ranges and extended the resolving power of ITS towards earlier nodes of phylogenetic trees. Our results reconcile previous contradicting evidence for the effects of data exclusion: in the case of more sophisticated indel placement, the exclusion of indel-rich regions from the analyses results in a loss of tree resolution, whereas in the case of simpler alignment methods, the exclusion of gapped sites improves it. Although the empirical datasets do not provide to measure alignment accuracy objectively, our results for the ITS region are consistent with previous simulations studies alignment algorithms. We suggest that sophisticated alignment algorithms and the inclusion of indels make the ITS region and potentially other rapidly evolving indel-rich loci valuable sources of phylogenetic information

  19. Phylogeny and biogeography of Allium (Amaryllidaceae: Allieae) based on nuclear ribosomal internal transcribed spacer and chloroplast rps16 sequences, focusing on the inclusion of species endemic to China.

    Science.gov (United States)

    Li, Qin-Qin; Zhou, Song-Dong; He, Xing-Jin; Yu, Yan; Zhang, Yu-Cheng; Wei, Xian-Qin

    2010-11-01

    The genus Allium comprises more than 800 species, placing it among the largest monocotyledonous genera. It is a variable group that is spread widely across the Holarctic region. Previous studies of Allium have been useful in identifying and assessing its evolutionary lineages. However, there are still many gaps in our knowledge of infrageneric taxonomy and evolution of Allium. Further understanding of its phylogeny and biogeography will be achieved only through continued phylogenetic studies, especially of those species endemic to China that have often been excluded from previous analyses. Earlier molecular studies have shown that Chinese Allium is not monophyletic, so the goal of the present study was to infer the phylogeny and biogeography of Allium and to provide a classification of Chinese Allium by placement of Chinese species in the context of the entire phylogeny. Phylogenetic studies were based on sequence data of the nuclear ribosomal internal transcribed spacer (ITS) and chloroplast rps16 intron, analysed using parsimony and Bayesian approaches. Biogeographical patterns were conducted using statistical dispersal-vicariance analysis (S-DIVA). Phylogenetic analyses indicate that Allium is monophyletic and consists of three major clades. Optimal reconstructions have favoured the ancestors of Amerallium, Anguinum, Vvedenskya, Porphyroprason and Melanocrommyum as originating in eastern Asia. Phylogenetic analyses reveal that Allium is monophyletic but that some subgenera are not. The large genetic distances imply that Allium is of ancient origin. Molecular data suggest that its evolution proceeded along three separate evolutionary lines. S-DIVA indicates that the ancestor of Amerallium, Anguinum, Vvedenskya, Porphyroprason and Melanocrommyum originated from eastern Asia and underwent different biogeographical pathways. A taxonomic synopsis of Chinese Allium at sectional level is given, which divides Chinese Allium into 13 subgenera and 34 sections.

  20. Unexpected High Intragenomic Variation in Two of Three Major Pest Thrips Species Does Not Affect Ribosomal Internal Transcribed Spacer 2 (ITS2 Utility for Thrips Identification

    Directory of Open Access Journals (Sweden)

    Vivek Kumar

    2017-10-01

    Full Text Available The mitochondrial cytochrome oxidase I gene (mtCO1 and the ribosomal internal transcribed spacer 2 region (ITS2 are among the most widely used molecular markers for insect taxonomic characterization. Three economically important species of thrips, Scirtothrips dorsalis, Thrips palmi, and Frankliniella occidentalis were selected to examine the extent of intragenomic variation within these two marker regions in the family Thripidae, and determine if this variation would affect the utility of markers in thrips molecular diagnostics. For each species, intragenomic (within individual variation and intergenomic (among individuals variation was assessed by cloning and sequencing PCR-amplified copies. Intergenomic variation was generally higher than intragenomic variation except in cases where intergenomic variation was very low, as in mtCO1 from S. dorsalis and F. occidentalis. Intragenomic variation was detected in both markers in all three of the thrips species, however, 2–3 times more intragenomic variation was observed for ITS2 than mtCO1 in both S. dorsalis and T. palmi. Furthermore, levels of intragenomic variation were low for both of the genes in F. occidentalis. In all of the three thrips species, no sex-based clustering of haplotypes was observed in either marker. Unexpected high intragenomic variation in ITS2 for two of three thrips species did not interfere with thrips diagnostics. However, caution should be taken in applying ITS2 to certain studies of S. dorsalis and T. palmi when high levels of intragenomic variation could be problematic or confounding. In such studies, mtCO1 may be a preferable marker. Possible reasons for discrepancies in intragenomic variation among genomic regions are discussed.

  1. Improved Bacterial 16S rRNA Gene (V4 and V4-5) and Fungal Internal Transcribed Spacer Marker Gene Primers for Microbial Community Surveys

    Energy Technology Data Exchange (ETDEWEB)

    Walters, William; Hyde, Embriette R.; Berg-Lyons, Donna; Ackermann, Gail; Humphrey, Greg; Parada, Alma; Gilbert, Jack A.; Jansson, Janet K.; Caporaso, J. Gregory; Fuhrman, Jed A.; Apprill, Amy; Knight, Rob; Bik, Holly

    2015-12-22

    ABSTRACT

    Designing primers for PCR-based taxonomic surveys that amplify a broad range of phylotypes in varied community samples is a difficult challenge, and the comparability of data sets amplified with varied primers requires attention. Here, we examined the performance of modified 16S rRNA gene and internal transcribed spacer (ITS) primers for archaea/bacteria and fungi, respectively, with nonaquatic samples. We moved primer bar codes to the 5′ end, allowing for a range of different 3′ primer pairings, such as the 515f/926r primer pair, which amplifies variable regions 4 and 5 of the 16S rRNA gene. We additionally demonstrated that modifications to the 515f/806r (variable region 4) 16S primer pair, which improves detection ofThaumarchaeotaand clade SAR11 in marine samples, do not degrade performance on taxa already amplified effectively by the original primer set. Alterations to the fungal ITS primers did result in differential but overall improved performance compared to the original primers. In both cases, the improved primers should be widely adopted for amplicon studies.

    ImportanceWe continue to uncover a wealth of information connecting microbes in important ways to human and environmental ecology. As our scientific knowledge and technical abilities improve, the tools used for microbiome surveys can be modified to improve the accuracy of our techniques, ensuring that we can continue to identify groundbreaking connections between microbes and the ecosystems they populate, from ice caps to the human body. It is important to confirm that modifications to these tools do not cause new, detrimental biases that would inhibit the field rather than continue to move it forward. We therefore demonstrated that two recently modified primer pairs that target taxonomically discriminatory regions of bacterial and fungal genomic DNA do not introduce new biases when used on a variety of sample types, from soil to

  2. Identification of planorbids from Venezuela by polymerase chain reaction amplification and restriction fragment length polymorphism of internal transcriber spacer of the RNA ribosomal gene

    Directory of Open Access Journals (Sweden)

    Caldeira Roberta L

    2000-01-01

    Full Text Available Snails of the genus Biomphalaria from Venezuela were subjected to morphological assessment as well as polymerase chain reaction and restriction fragment length polymorphism (PCR-RFLP analysis. Morphological identification was carried out by comparison of characters of the shell and the male and female reproductive apparatus. The PCR-RFLP involved amplification of the internal spacer region ITS1 and ITS2 of the RNA ribosomal gene and subsequent digestion of this fragment by the restriction enzymes DdeI, MnlI, HaeIII and MspI. The planorbids were compared with snails of the same species and others reported from Venezuela and present in Brazil, Cuba and Mexico. All the enzymes showed a specific profile for each species, that of DdeI being the clearest. The snails were identified as B. glabrata, B. prona and B. kuhniana.

  3. Structural equivalence in the transcribed spacers of pre-rRNA transcripts in Schizosaccharomyces pombe.

    Science.gov (United States)

    Lalev, A I; Nazar, R N

    1999-08-01

    The structure of the internal transcribed spacer 2 (ITS2) in Schizosaccharomyces pombe was re-evaluated with respect to phylogenetically conserved features in yeasts, features in other transcribed spacer regions as well as the binding of transacting factors which potentially play a role in ribosomal maturation. Computer analyses and probes for nuclease protection indicate a very simple core structure consisting of a single extended hairpin which includes the interacting termini of the mature 5.8S and 25S rRNAs. Comparisons with ITS2 sequences in greatly diverging organisms indicate that the same feature also can be recognized. This is especially clear in organisms that contain very short sequences in which the putative structures are much less ambiguous. Diversity between organisms is the result of changes in hairpin length as well as the addition of branched helices. Protein binding and gel retardation studies with the S.pombe ITS2 further indicate that, as observed in the 3" external transcribed spacer (ETS) and ITS1 regions, the extended hairpin is not only the site of intermediate RNA cleavage during rRNA processing but also a site for specific interactions with one or more soluble factors. Taken together with other analyses on transcribed spacer regions, the present data suggest that the spacer regions all may act in a similar fashion, not only to organize the maturing terminal sequences, but also serve to organize specific soluble factors possibly acting with snoRNAs or in a manner which is analogous with that of the free snoRNPs.

  4. Genetic variations in the beta-tubulin gene and the internal transcribed spacer 2 region of Trichuris species from man and baboons

    DEFF Research Database (Denmark)

    Hansen, Tina Vicky Alstrup; Thamsborg, Stig Milan; Olsen, Annette

    2013-01-01

    of this study was to investigate whether these SNPs were present in the beta-tubulin gene of Trichuris spp. from humans and baboons. As a secondary objective, the degree of identity between T. trichiura from humans and Trichuris spp. from baboons was evaluated based on the beta-tubulin gene and the internal...

  5. Development of a novel triplex PCR assay for the detection and differentiation of thermophilic species of Campylobacter using 16S-23S rDNA internal transcribed spacer (ITS) region.

    Science.gov (United States)

    Khan, I U H; Edge, T A

    2007-12-01

    Campylobacter species are significantly implicated in human gastrointestinal infections. Of 20 species of Campylobacter, C. jejuni, C. coli and C. lari have been considered as the most important causative agents of human infections. In order to better understand the occurrence and epidemiology of these thermophilic Campylobacter species, an improved and rapid detection method is warranted. A novel triplex polymerase chain reaction (PCR) assay was developed based on the variable 16S-23S rDNA internal transcribed spacer (ITS) region to identify and discriminate between these species in water samples. Campylobacter species-specific primers for C. jejuni, C. coli and C. lari derived from highly variable sequences in the ITS region were used. Specificity of the newly designed primers and PCR conditions were verified using other species of Campylobacter as well as 31 different negative control species. The assay was further validated with 97 Campylobacter cultures from water samples. The assay was found to be simple, easy to perform, and had a high sensitivity, specificity and reproducibility. It enabled simultaneous detection and differentiation of multiple Campylobacter species in water samples. Use of the newly developed PCR assay, coupled with a previously developed rapid DNA template preparation step, will enable improved detection capabilities for Campylobacter species in environmental matrices.

  6. Single-Cell DNA barcoding using sequences from the small subunit rRNA and internal transcribed spacer region identifies new species of Trichonympha and Trichomitopsis from the hindgut of the termite Zootermopsis angusticollis.

    Directory of Open Access Journals (Sweden)

    Vera Tai

    Full Text Available To aid in their digestion of wood, lower termites are known to harbour a diverse community of prokaryotes as well as parabasalid and oxymonad protist symbionts. One of the best-studied lower termite gut communities is that of Zootermopsis angusticollis which has been known for almost 100 years to possess 3 species of Trichonympha (T. campanula, T. collaris, and T. sphaerica, 1 species of Trichomitopsis (T. termopsidis, as well as smaller flagellates. We have re-assessed this community by sequencing the small subunit (SSU rRNA gene and the internal transcribed spacer (ITS region from a large number of single Trichonympha and Trichomitopsis cells for which morphology was also documented. Based on phylogenetic clustering and sequence divergence, we identify 3 new species: Trichonympha postcylindrica, Trichomitopsis minor, and Trichomitopsis parvus spp. nov. Once identified by sequencing, the morphology of the isolated cells for all 3 new species was re-examined and found to be distinct from the previously described species: Trichonympha postcylindrica can be morphologically distinguished from the other Trichonympha species by an extension on its posterior end, whereas Trichomitopsis minor and T. parvus are smaller than T. termopsidis but similar in size to each other and cannot be distinguished based on morphology using light microscopy. Given that Z. angusticollis has one of the best characterized hindgut communities, the near doubling of the number of the largest and most easily identifiable symbiont species suggests that the diversity of hindgut symbionts is substantially underestimated in other termites as well. Accurate descriptions of the diversity of these microbial communities are essential for understanding hindgut ecology and disentangling the interactions among the symbionts, and molecular barcoding should be a priority for these systems.

  7. Single-Cell DNA barcoding using sequences from the small subunit rRNA and internal transcribed spacer region identifies new species of Trichonympha and Trichomitopsis from the hindgut of the termite Zootermopsis angusticollis.

    Science.gov (United States)

    Tai, Vera; James, Erick R; Perlman, Steve J; Keeling, Patrick J

    2013-01-01

    To aid in their digestion of wood, lower termites are known to harbour a diverse community of prokaryotes as well as parabasalid and oxymonad protist symbionts. One of the best-studied lower termite gut communities is that of Zootermopsis angusticollis which has been known for almost 100 years to possess 3 species of Trichonympha (T. campanula, T. collaris, and T. sphaerica), 1 species of Trichomitopsis (T. termopsidis), as well as smaller flagellates. We have re-assessed this community by sequencing the small subunit (SSU) rRNA gene and the internal transcribed spacer (ITS) region from a large number of single Trichonympha and Trichomitopsis cells for which morphology was also documented. Based on phylogenetic clustering and sequence divergence, we identify 3 new species: Trichonympha postcylindrica, Trichomitopsis minor, and Trichomitopsis parvus spp. nov. Once identified by sequencing, the morphology of the isolated cells for all 3 new species was re-examined and found to be distinct from the previously described species: Trichonympha postcylindrica can be morphologically distinguished from the other Trichonympha species by an extension on its posterior end, whereas Trichomitopsis minor and T. parvus are smaller than T. termopsidis but similar in size to each other and cannot be distinguished based on morphology using light microscopy. Given that Z. angusticollis has one of the best characterized hindgut communities, the near doubling of the number of the largest and most easily identifiable symbiont species suggests that the diversity of hindgut symbionts is substantially underestimated in other termites as well. Accurate descriptions of the diversity of these microbial communities are essential for understanding hindgut ecology and disentangling the interactions among the symbionts, and molecular barcoding should be a priority for these systems.

  8. Nucleotide sequence of an external transcribed spacer in Xenopus laevis rDNA: sequences flanking the 5' and 3' ends of 18S rRNA are non-complementary.

    OpenAIRE

    Maden, B E; Moss, M; Salim, M

    1982-01-01

    We have sequenced the external transcribed spacer (ETS) of a ribosomal transcription unit from Xenopus laevis, together with sections of the preceding non-transcribed spacer. Our analysis was carried out on the same cloned transcription unit as that from which the internal transcribed spacers (ITS) were previously sequenced. The ETS is approximately 712 nucleotides long and, like the ITS regions, is generally very rich in C plus G. Features of the sequence include an excess of oligo-C tracts ...

  9. The external transcribed spacer and preceding region of Xenopus borealis rDNA: comparison with the corresponding region of Xenopus laevis rDNA.

    Science.gov (United States)

    Furlong, J C; Forbes, J; Robertson, M; Maden, B E

    1983-12-10

    We report sequence data from a cloned rDNA unit from Xenopus borealis, extending leftwards from the 18S gene to overlap a region previously sequenced by R. Bach, B. Allet and M. Crippa (Nucleic Acids Research 9, 5311-5330). Comparison with data from other species of Xenopus leads to the inference that the transcription initiation site in X.borealis is in the newly sequenced region and not, as was previously thought, in the region sequenced earlier. The X.borealis external transcribed spacer thus defined is some 612 nucleotides long, about 100 nucleotides shorter than in X.laevis. The X.borealis and X.laevis external transcribed spacers show a pattern of extensive but interrupted sequence divergence, with a large conserved tract starting about 100 nucleotides downstream from the transcription initiation site and shorter conserved tracts elsewhere. The regions in between the conserved tracts differ in length between the respective external transcribed spacers indicating that insertions and deletions have contributed to their divergence, as previously inferred for the internal transcribed spacers. Much of the overall length difference is in the region flanking the 18S gene, where there are also length microheterogeneities in X.laevis rDNA. As in X.laevis, the transcribed spacer sequences flanking the 18S gene in X.borealis contain no major tracts of mutual complementarity. The accumulated data on transcribed spacers in Xenopus render it unlikely that processing of ribosomal precursor RNA involves interaction between the regions flanking 18S RNA.

  10. 45S rDNA external transcribed spacer organization reveals new phylogenetic relationships in Avena genus.

    Science.gov (United States)

    Rodrigues, Joana; Viegas, Wanda; Silva, Manuela

    2017-01-01

    The genus Avena comprises four distinct genomes organized in diploid (AA or CC), tetraploid (AABB or AACC) and hexaploid species (AACCDD), constituting an interesting model for phylogenetic analysis. The aim of this work was to characterize 45S rDNA intergenic spacer (IGS) variability in distinct species representative of Avena genome diversity-A. strigosa (AA), A. ventricosa (CvCv), A. eriantha (CpCp), A. barbata (AABB), A. murphyi (AACC), A. sativa (AACCDD) and A. sterilis (AACCDD) through the assessment of the 5' external transcribed spacer (5'-ETS), a promising IGS region for phylogenetic studies poorly studied in Avena genus. In this work, IGS length polymorphisms were detected mainly due to distinct 5'-ETS sequence types resulting from major differences in the number and organization of repeated motifs. Although species with A genome revealed a 5'-ETS organization (A-organization) similar to the one previously described in A. sativa, a distinct organization was unraveled in C genome diploid species (C-organization). Interestingly, such new organization presents a higher similarity with other Poaceae species than A-genome sequences, supporting the hypothesis of C-genome being the ancestral Avena genome. Additionally, polyploid species with both genomes mainly retain the A-genome 5'-ETS organization, confirming the preferential elimination of C-genome sequences in Avena polyploid species. Moreover, 5'-ETS sequences phylogenetic analysis consistently clustered the species studied according to ploidy and genomic constitution supporting the use of ribosomal genes to highlight Avena species evolutive pathways.

  11. Ribosomal DNA internal transcribed spacer 1 and internal ...

    African Journals Online (AJOL)

    USER

    2010-07-26

    Jul 26, 2010 ... 4Institute of Bioscience and Biotechnology, Kangwon National University, Chuncheon, Kangwon-Do, 200-701, Korea. ...... phenolics level, antioxidant activities and cytotoxicity of young sprouts of some traditional Korean salad plants. Plant Food Hum. Nutr. 64: 25-31. doi: 10.1007/s11130-008-0092-x.

  12. Distribution, fauna and seasonal variation of sandflies, simultaneous detection of nuclear internal transcribed spacer ribosomal DNA gene of Leishmania major in Rhombomys opimus and Phlebotomus papatasi, in Natanz district in central part of Iran.

    Science.gov (United States)

    Parvizi, Parviz; Akhoundi, Mohammad; Mirzaei, Hanieh

    2012-01-01

    Zoonotic cutaneous leishmaniasis (ZCL) due to Leishmania major is increasing in many parts of Iran. This disease originally is a disease found in gerbils. Leishmania parasites are transmitted by sandflies that live and breed in gerbil burrows. Nested PCR amplified Leishmania ITS1-5.8S rRNA gene in both main reservoir host "Rhombomys opimus" and in the "Phlebotomus papatasi" main vector of ZCL, in Iran. Population differentiation and seasonal variation of sandflies were analyzed at a microgeographical level in order to identify any isolation by distance, habitat or seasons. Populations of sandflies were sampled from the edges of villages in Natanz, Isfahan province, Iran, using the Centers for Disease Control traps and sticky papers. Individual sandflies were identified based on external and internal morphological characters. Nested PCR protocols were used to amplify Leishmania ITS1-5.8S rRNA gene, which were shown to be species-specific via DNA sequence. A total of 4500 sandflies were collected and identified. P. papatasi, Phlebotomus sergenti and Phlebotomus jacusieli from genus Phlebotomus and Sergentomyia sintoni and Sergentomyia clydei from genus Sergentomyia were identified in this region. P. papatasi was the most abundant sandfly in the collections. Ten out of 549 female P. papatasi and four out of 19 R. opimus were found to be infected with L. major. Seasonal activity of sandflies starts in June and ends in November. Abundance of P. papatasi was in September. Finding and molecular typing of L. major in P. papatasi and R. opimus confirmed the main vector and reservoir in this region.

  13. Internal Transcribed Spacer (ITS), an ideal DNA barcode for species ...

    African Journals Online (AJOL)

    Background: DNA barcoding is a technique used to identify species based on species-specific differences in short regions of their DNA. It is widely used in species discrimination of medicinal plants and traditional medicines. Materials and Methods: In the present study, four potential DNA barcodes, namely rbcL, matK, ...

  14. The internal transcribed spacer rDNA specific markers for ...

    African Journals Online (AJOL)

    GREGORY

    2010-09-13

    Sep 13, 2010 ... 1Department of Bio-Health Technology, Kangwon National University, Chuncheon, Kangwon-Do, 200-701, Korea. 2Department of Forest ... E-mail: soonkwan@kangwon.ac.kr. Tel: +82 33 250 6476. Fax: +82 33 250 ... CDGN2, YYHB1 and YYHB2 were collected from Goseong-Gun. Maam-Myeon (GSMA) ...

  15. Nucleotide sequence of an external transcribed spacer in Xenopus laevis rDNA: sequences flanking the 5' and 3' ends of 18S rRNA are non-complementary.

    Science.gov (United States)

    Maden, B E; Moss, M; Salim, M

    1982-04-10

    We have sequenced the external transcribed spacer (ETS) of a ribosomal transcription unit from Xenopus laevis, together with sections of the preceding non-transcribed spacer. Our analysis was carried out on the same cloned transcription unit as that from which the internal transcribed spacers (ITS) were previously sequenced. The ETS is approximately 712 nucleotides long and, like the ITS regions, is generally very rich in C plus G. Features of the sequence include an excess of oligo-C tracts over oligo-G tracts and a tract of 37 nucleotides consisting almost entirely of G and A residues. Parts of the sequence can give rise to stable internal secondary structures. However, in contrast to Escherichia coli, there is no potential for major base-pairing between the 18S flanking regions of the ETS and ITS. Further findings are that there are no initiation (ATG) codons in the ETS and that, as in other X.laevis rDNA cloned units, the sequence preceding the ETS is duplicated, with a few changes, in the "Bam island" sequence of the non-transcribed spacer.

  16. Molecular strain typing ofTrichophyton mentagrophytes(T. mentagrophytesvar.interdigitale) using non-transcribed spacer region as a molecular marker.

    Science.gov (United States)

    Ramaraj, Vijayakumar; Vijayaraman, Rajyoganandh S; Hemanth, Veena; Rangarajan, Sudha; Kindo, Anupma Jyoti

    2017-11-01

    : Dermatophytes are keratinophilic fungi that infect keratinized tissues of human and animal origin. Trichophyton mentagrophytes is considered to be a species complex composed of several strains, which include both anthropophiles and zoophiles. Accurate discrimination is critical for comprehensive understanding of the clinical and epidemiological implications of the genetic heterogeneity of this complex. Molecular strain typing renders an effective way to discriminate each strain. The objective of the study was to characterize T. mentagrophytes clinical isolates to sub-species level using molecular techniques and non-transcribed spacer (NTS) region as marker. Sixty four T. mentagrophytes clinical isolates were identified by phenotypic methods. These were subjected to polymerase chain reaction targeting three sub-repeat elements (SREs), TmiS0, TmiS1 and TmiS2 of the NTS region. Sequence analysis of internal transcribed spacer (ITS) region of different types was also done. Strain-specific polymorphism was observed in all three loci. Totally, 13 different PCR types were obtained on combining all the three SREs loci. No variation was observed in the ITS region. The study described the usefulness of molecular strain typing technique for the discrimination of the T. mentagrophytes isolates. This will help for the future explorations into the epidemiology of T. mentagrophytes and its complex.

  17. Molecular Strain Typing of Clinical Isolates, Trichophyton rubrum using Non Transcribed Spacer (NTS) Region as a Molecular Marker.

    Science.gov (United States)

    Ramaraj, Vijayakumar; Vijayaraman, Rajyoganandh S; Elavarashi, Elangovan; Rangarajan, Sudha; Kindo, Anupma Jyoti

    2017-05-01

    Dermatophytes are a group of fungi which infect keratinized tissues and causes superficial mycoses in humans and animals. The group comprises of three major genera, Trichophyton , Microsporum and Epidermophyton . Among them Trichophyton rubrum is a predominant anthropophilic fungi which causes chronic infections. Although, the infection is superficial and treatable, reinfection/coinfection causes inflation in the treatment cost. Identifying the source and mode of transmission is essential to prevent its transmission. Accurate discrimination is required to understand the clinical (relapse or reinfection) and epidemiological implications of the genetic heterogeneity of this species. Polymorphism in the Non Transcribed Spacer (NTS) region of ribosomal DNA (rDNA) clusters renders an effective way to discriminate strains among T. rubrum . To carry out the strain typing of the clinical isolates, Trichophyton rubrum using NTS as a molecular marker. Seventy T.rubrum clinical isolates obtained from April-2011-March 2013, from Sri Ramachandra Medical Centre, Chennai, Tamil Nadu, India, were identified by conventional phenotypic methods and included in this prospective study. The isolates were then subjected to Polymerase Chain Reaction (PCR) targeting two subrepeat elements (SREs), TRS-1 and TRS-2 of the NTS region. Strain-specific polymorphism was observed in both subrepeat loci. Total, nine different strains were obtained on combining both TRS-1 and TRS-2, SREs. The outcome has given a strong representation for using NTS region amplification in discriminating the T. rubrum clinical isolates. The method can be adapted as a tool for conducting epidemiology and population based study in T. rubrum infections. This will help in future exploration of the epidemiology of T. rubrum .

  18. Diversity of the marine picocyanobacteria Prochlorococcus and Synechococcus assessed by terminal restriction fragment length polymorphisms of 16S-23S rRNA internal transcribed spacer sequences Diversidad de las picocianobacterias marinas Prochlorococcus y Synechococcus por medio de polimorfismos de longitud de fragmentos de restricción terminal en secuencias del espaciador transcrito interno del ARNr 16S - 23S

    Directory of Open Access Journals (Sweden)

    PARIS LAVIN

    2008-12-01

    Full Text Available In order to assess the appropriateness of the use of internal transcribed spacer (ITS sequences for the study of population genetics of marine cyanobacteria, we amplified and cloned the 16S rRNA gene plus the 16S-23S ITS regions of six strains of Prochlorococcus and Synechococcus. We analyzed them by denaturing gradient gel electrophoresis (DGGE and terminal restriction fragment length polymorphisms (T-RFLP. When using the standard application of these techniques, we obtained more than one band or terminal restriction fragment (T-RF per strain or cloned sequence. Reports in literature have suggested that these anomalies can result from the formation of secondary structures. Secondary structures of the ITS sequences of Prochlorococcus and Synechococcus strains were computationally modelled at the different temperatures that were used during the polymerase chain reaction (PCR. Modelling results predicted the existence of hairpin loops that would still be present at the extensión temperature; it is likely that these loops produced incomplete and single stranded PCR products. We modified the standard T-RFLP procedure by adding the labelled ITS primer in the last two cycles of the PCR reaction; this resulted, in most cases, in only one T-RF per ribotype. Application of this technique to a natural picoplankton community in marine waters off northern Chile, showed that it was possible to identify the presence, and determine the relative abundance, of several phylogenetic lineages within the genera Prochlorococcus and Synechococcus inhabiting the euphotic zone. Phylogenetic analysis of ITS sequences obtained by cloning and sequencing DNA from the same sample confirmed the presence of the different genotypes. With the proposed modification, T-RFLP profiles should therefore be suitable for studying the diversity of natural populations of cyanobacteria, and should become an important tool to study the factors influencing the genetic structure and

  19. Paenibacillus larvae 16S-23S rDNA intergenic transcribed spacer (ITS) regions: DNA fingerprinting and characterization.

    Science.gov (United States)

    Dingman, Douglas W

    2012-07-01

    Paenibacillus larvae is the causative agent of American foulbrood in honey bee (Apis mellifera) larvae. PCR amplification of the 16S-23S ribosomal DNA (rDNA) intergenic transcribed spacer (ITS) regions, and agarose gel electrophoresis of the amplified DNA, was performed using genomic DNA collected from 134 P. larvae strains isolated in Connecticut, six Northern Regional Research Laboratory stock strains, four strains isolated in Argentina, and one strain isolated in Chile. Following electrophoresis of amplified DNA, all isolates exhibited a common migratory profile (i.e., ITS-PCR fingerprint pattern) of six DNA bands. This profile represented a unique ITS-PCR DNA fingerprint that was useful as a fast, simple, and accurate procedure for identification of P. larvae. Digestion of ITS-PCR amplified DNA, using mung bean nuclease prior to electrophoresis, characterized only three of the six electrophoresis bands as homoduplex DNA and indicating three true ITS regions. These three ITS regions, DNA migratory band sizes of 915, 1010, and 1474 bp, signify a minimum of three types of rrn operons within P. larvae. DNA sequence analysis of ITS region DNA, using P. larvae NRRL B-3553, identified the 3' terminal nucleotides of the 16S rRNA gene, 5' terminal nucleotides of the 23S rRNA gene, and the complete DNA sequences of the 5S rRNA, tRNA(ala), and tRNA(ile) genes. Gene organization within the three rrn operon types was 16S-23S, 16S-tRNA(ala)-23S, and l6S-5S-tRNA(ile)-tRNA(ala)-23S and these operons were named rrnA, rrnF, and rrnG, respectively. The 23S rRNA gene was shown by I-CeuI digestion and pulsed-field gel electrophoresis of genomic DNA to be present as seven copies. This was suggestive of seven rrn operon copies within the P. larvae genome. Investigation of the 16S-23S rDNA regions of this bacterium has aided the development of a diagnostic procedure and has helped genomic mapping investigations via characterization of the ITS regions. Copyright © 2012 Elsevier Inc

  20. 7th International Workshop on the Identification of Transcribed Sequences. Beyond the Identification of Transcribed Sequences

    Energy Technology Data Exchange (ETDEWEB)

    Gardner, Kathleen

    1997-11-19

    The Seventh Annual Human Genome Conference: Beyond the Identification of Transcribed Sequences (BITS) was held November 16-19, 1997 at the Asilomar Conference Center in Monterey, California. The format for the meeting was a combination of oral presentations, group discussions and poster sessions. The original workshop was held to discuss methodologies for the identification of transcribed sequences in mammalian genomes. Over the years, the focus of the workshops has gradually shifted towards functional analysis, with the most dramatic change in emphasis at this meeting, as reflected in the modest change in the workshop title. Topics presented and discussed included: (1) large scale expression and mutational analysis in yeast, C. elegans, Drosophila and zebrafish, (2) comparative mapping of zebrafish, chicken and Fugu; (3) functional analysis in mouse using promoter traps, mutational analysis of biochemical pathways, and Cre/lox constructs; (4) construction of 5 foot end and complete cDNA libraries; (5) expression analysis in mammalian organisms by array screening and differential display; (6) genome organization as determined by detailed transcriptional mapping and genomic sequence analysis; (7) analysis of genomic sequence, including gene and regulatory sequence predictions, annotation of genomic sequence, development of expression databases and verification of sequence analysis predictions; and (8) structural/functional relationships as determined by RNA secondary structure analysis and evolutionary conservation of non-coding sequences.

  1. [Overexpression of the nucleolar protein SURF-6 in mouse fibroblasts NIH/3T3 leads to stabilisation of intragenic transcribed spacers of the pre-rRNA].

    Science.gov (United States)

    Polzikov, M A; Veĭko, N N; Zharskaia, O O; Magoulas, Kh B; Zatsepina, O V

    2010-01-01

    SURF-6 is an evolutionary conserved nucleolar protein that is required for maintenance of cell viability, but its functional significance in mammals still remains illusive. In the present work we examined effects of SURF-6 overexpression in mouse NIH/3T3 fibroblasts transfected with two plasmids. The plasmid pUHrT62-1 encodes a tetracycline-dependant trans-activator, the protein rtTA, the plasmid pBI-SURF6--the genes of EGFP (enhanced green fluorescent protein) and of mouse SURF-6 which expression was controlled by the rtTA-responsive bi-directorial promoter. Western blot analysis showed that the SURF-6 level was severely augmented in cells transfected with pUHrT62-1 and pBI-SURF6 and incubated with the inducer--doxycycline opposed to the transfected but not-induced cells. The increase of SURF-6 was observed in 24 and 48 h after adding the inducer doxycycline. Dot-hybridization of isolated RNA with biotinilated oligonucleotide probes to various regions of mouse primarily pre-rRNA transcripts showed that overexpression of SURF-6 enhanced levels of the second intragenic transcribed spacer ITS2 in about seven folds and of the 5' external transcribed spacer 5'ETS in two folds. Amounts of fragments corresponding to 18S, 5.8S and 28S rRNA remained almost unchanged. These observations for the first time demonstrated that mammalian SURF-6 helps to stabilize or prevents premature cleavage of the pre-rRNA intragenic transcribed spacers, particularly of ITS2, similar to its homologue in S. cerevisiae the protein Rrp14. Today metazoan proteins that play a similar role in ribosome biogenesis, are not described.

  2. The external transcribed spacer and preceding region of Xenopus borealis rDNA: comparison with the corresponding region of Xenopus laevis rDNA.

    OpenAIRE

    Furlong, J C; Forbes, J; Robertson, M; Maden, B E

    1983-01-01

    We report sequence data from a cloned rDNA unit from Xenopus borealis, extending leftwards from the 18S gene to overlap a region previously sequenced by R. Bach, B. Allet and M. Crippa (Nucleic Acids Research 9, 5311-5330). Comparison with data from other species of Xenopus leads to the inference that the transcription initiation site in X.borealis is in the newly sequenced region and not, as was previously thought, in the region sequenced earlier. The X.borealis external transcribed spacer t...

  3. [Comparison of rDNA internal transcribed spacer sequences in asparagus].

    Science.gov (United States)

    Ou, Li-Jun; Ye, Wei; Zeng, Gui-Ping; Jiang, Xiang-Hui; She, Chao-Wen; Xu, Dong; Yang, Jia-Qiang

    2010-10-01

    Using ITS sequence of nine species to identify counterfeiting medicine and analyse phylogenetic of Asparagus. Analysing ITS sequences by amplification, cloning,sequencing and alignment. The length range of ITS sequence of nine species was from 711 to 748 bp, the percentage of G + C content was about 60%. The phylogenetic tree constructed on the basis of the ITS sequences showed that nine species were divided into two branches: Asparagus cochinchinensis, Asparagus officinalis, Asparagus densiflorus, Asparagus densiflorus cv. Myers and Asparagus densiflorus cv. Sprengeri were a branch and the others were a branch. Asparagus densiflorus and Asparagus densflorus cv. Myers those were from Africa had priority to clustering and then clustering with Asparagus densiflorus cv. Sprengeri that was a variant of Asparagus densiflorus in the first branch. Asparagus setaceus had relatively distant genetic relationship with the others three materials in another branch. The ITS sequences could distinguish species of Asparagus to test the counterfeit. Division status in phylogenetic tree of some species were debatable and ITS sequence was combined with others analytical tools to analyze the realistic phylogeny.

  4. rDNA internal transcribed spacer sequence analysis of Lycoris Hert.

    African Journals Online (AJOL)

    Yomi

    2012-04-10

    Apr 10, 2012 ... exploitation-utilization prospects with rich galantamine, lycorine and other alkaloids (Xie et al., 2007). In Lycoris, hybridization has been proved to be one of the important modes of speciation (Kurita and Hsu, 1996). And development of leaves of Lycoris does not coincide with its flowering during its growth ...

  5. Phylogenetic reconstruction of endophytic fungal isolates using internal transcribed spacer 2 (ITS2) region.

    Science.gov (United States)

    GokulRaj, Kathamuthu; Sundaresan, Natesan; Ganeshan, Enthai Jagan; Rajapriya, Pandi; Muthumary, Johnpaul; Sridhar, Jayavel; Pandi, Mohan

    2014-01-01

    Endophytic fungi are inhabitants of plants, living most part of their lifecycle asymptomatically which mainly confer protection and ecological advantages to the host plant. In this present study, 48 endophytic fungi were isolated from the leaves of three medicinal plants and characterized based on ITS2 sequence - secondary structure analysis. ITS2 secondary structures were elucidated with minimum free energy method (MFOLD version 3.1) and consensus structure of each genus was generated by 4SALE. ProfDistS was used to generate ITS2 sequence structure based phylogenetic tree respectively. Our elucidated isolates were belonging to Ascomycetes family, representing 5 orders and 6 genera. Colletotrichum/Glomerella spp., Diaporthae/Phomopsis spp., and Alternaria spp., were predominantly observed while Cochliobolus sp., Cladosporium sp., and Emericella sp., were represented by singletons. The constructed phylogenetic tree has well resolved monophyletic groups with >50% bootstrap value support. Secondary structures based fungal systematics improves not only the stability; it also increases the precision of phylogenetic inference. Above ITS2 based phylogenetic analysis was performed for our 48 isolates along with sequences of known ex-types taken from GenBank which confirms the efficiency of the proposed method. Further, we propose it as superlative marker for reconstructing phylogenetic relationships at different taxonomic levels due to their lesser length.

  6. Nuclear ribosomal internal transcribed spacer (ITS) region as a universal DNA barcode marker for Fungi

    Czech Academy of Sciences Publication Activity Database

    Schoch, C.L.; Seifert, K.A.; Huhndorf, S.; Robert, V.; Spouge, J.L.; Levesque, C.A.; Chen, W.; Bolchacova, E.; Voigt, K.; Crous, P.W.; Miller, A.N.; Wingfield, M. J.; Aime, M.C.; An, K.D.; Bai, F.Y.; Barreto, R.W.; Bergeron, M.J.; Blackwell, M.; Boekhout, T.; Bogale, M.; Boonyuen, N.; Burgaz, A.R.; Buyck, B.; Cai, L.; Cai, Q.; Cardinali, G.; Chaverri, P.; Coppins, B.J.; Crespo, A.; Cubas, P.; Cummings, C.; Damm, U.; de Beer, Z.W.; de Hoog, G.S.; Del-Prado, R.; Dentinger, B.; Dieguez-Uribeondo, J.; Divakar, P.K.; Douglas, B.; Duenas, M.; Duong, T.A.; Eberhardt, U.; Edwards, J.E.; Elshahed, M.S.; Fliegerová, Kateřina; Furtado, M.; Garcia, M.A.; Ge, Z.W.; Griffith, G.W.; Griffiths, K.; Groenewald, J.Z.; Groenewald, M.; Grube, M.; Gryzenhout, M.; Guo, L.D.; Hagen, F.; Hambleton, S.; Hamelin, R.C.; Hansen, K.; Harrold, P.; Heller, G.; Herrera, C.; Hirayama, K.; Hirooka, Y.; Ho, H.M.; Hoffmann, K.; Hofstetter, V.; Hognabba, F.; Hollingsworth, P.M.; Hong, S.B.; Hosaka, K.; Houbraken, J.; Hughes, K.; Huhtinen, S.; Hyde, K.D.; James, T.; Johnson, E.M.; Johnson, J.E.; Johnston, P.R.; Jones, E.B.; Kelly, L.J.; Kirk, P.M.; Knapp, D.G.; Koljalg, U.; Kovacs, G.M.; Kurtzman, C.P.; Landvik, S.; Leavitt, S.D.; Liggenstoffer, A.S.; Liimatainen, K.; Lombard, L.; Luangsa-Ard, J.J.; Lumbsch, H.T.; Maganti, H.; Maharachchikumbura, S.S.; Martin, M.P.; May, T.W.; McTaggart, A.R.; Methven, A.S.; Meyer, W.; Moncalvo, J.M.; Mongkolsamrit, S.; Nagy, L.G.; Nilsson, R.H.; Niskanen, T.; Nyilasi, I.; Okada, G.; Okane, I.; Olariaga, I.; Otte, J.; Papp, T.; Park, D.; Petkovits, T.; Pino-Bodas, R.; Quaedvlieg, W.; Raja, H.A.; Redecker, D.; Rintoul, T.; Ruibal, C.; Sarmiento-Ramirez, J.M.; Schmitt, I.; Schussler, A.; Shearer, C.; Sotome, K.; Stefani, F.O.; Stenroos, S.; Stielow, B.; Stockinger, H.; Suetrong, S.; Suh, S.O.; Sung, G.H.; Suzuki, M.; Tanaka, K.; Tedersoo, L.; Telleria, M.T.; Tretter, E.; Untereiner, W.A.; Urbina, H.; Vagvolgyi, C.; Vialle, A.; Vu, T.D.; Walther, G.; Wang, Q.M.; Wang, Y.; Weir, B.S.; Weiss, M.; White, M.M.; Xu, J.; Yahr, R.; Yang, Z.L.; Yurkov, A.; Zamora, J.C.; Zhang, N.; Zhuang, W.Y.; Schindel, D.

    Roč. 109, č. 16 ( 2012 ), s. 6241-6246 ISSN 0027-8424 Institutional research plan: CEZ:AV0Z50450515 Keywords : DNA barcoding * fungal biodiversity Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 9.737, year: 2012

  7. KERAGAMAN DURIAN BERDASARKAN FRAGMEN INTERNAL TRANSCRIBED SPACERS (ITS DNA RIBOSOMAL MELALUI ANALISIS PCR-RFLP

    Directory of Open Access Journals (Sweden)

    R. U. Hikmah

    2016-11-01

    Full Text Available Durian adalah salah satu jenis buah-buahan tropis yang memiliki nilai ekonomi tinggi. Durian memiliki bermacam-macam kultivar dengan morfologi yang sulit untuk membedakan. jaminan identitas penting bagi informasi mendasar dalam meningkatkan efisiensi pemuliaan dan pengembangan durian. identifikasi molekuler dianggap lebih akurat dibandingkan dengan karakter morfologi. Polymerase Chain Reaction Restriction Fragment Length Polimorfism (PCR-RFLP adalah metode untuk menganalisis hasil DNA fragmen panjang perbedaan yang mencerna menggunakan enzim restriksi dengan endonuklease. Sampel yang digunakan dalam penelitian ini adalah aksesi durian diambil secara acak di kecamatan Gunungpati, Semarang. Genomik DNA diisolasi berdasarkan protokol Kit nukleon Phytopure dengan modifikasi. ITS wilayah ribosom DNA diamplifikasi menggunakan teknik PCR-RFLP mengeksploitasi primer spesifik L ITS dan ITS 4 menghasilkan ITS panjang fragmen pada 800 bp. Amplikon yang dicerna menggunakan enam enzim restriksi AluI, Eco471, Bsp1431, BsuRI, Mph11301 dan Ade1. Hasil penelitian dari 11 aksesi durian yang diperiksa menunjukkan bahwa enzim Bsp1431 memiliki dua situs tertentu yang dipotong pada ukuran 550 bp dan 120 bp. enzim BsuR1 memiliki luka situs tertentu dalam ukuran 600 bp. Sedangkan enzim Eco471 telah mencerna situs spesifik pada ukuran 450 bp. Kesimpulan dari penelitian ini adalah durian nomor aksesi ke-12, 15, dan 17 memiliki hubungan genetik dekat dan diduga berada di salah satu spesies.Durian is one of the types of tropical fruits that has high economic value. Durian has an assortment of cultivars with morphology that are difficult to distinguish. Identity assurance is important for the fundamental information in increasing the efficiency of breeding and development of durian. Molecular identification is considered to be more accurate than the morphological characters. Polymerase Chain Reaction Restriction Fragment Length Polimorfism (PCR-RFLP is a method to analyze the results of DNA fragment length difference that digest using restriction enzyme with endonuclease. The sample used in this study was the accession of durian taken randomly in Gunungpati district, Semarang. Genomic DNA was isolated based on Nucleon Phytopure Kit protocol with modification. ITS DNA ribosomal region was amplified using PCR-RFLP technique exploiting specific primers ITS L and ITS 4 produce ITS fragment length at 800 bp. Amplicon was digested using six restriction enzyme AluI, Eco471, Bsp1431, BsuRI, Mph11301 and Ade1. The research result of 11 accessions durian which is examined shows that the Bsp1431 enzyme has two specific sites that is cut on the size 550 bp and 120 bp. BsuR1 enzymes have a specific site cuts in the size of 600 bp. Whereas Eco471 enzyme has digesting sites specifics on size 450 bp. The conclusion of this research is durian accession number 12th, 15th, and 17th have close genetic relation and are alleged to be in one species.

  8. Nuclear ribosomal internal transcribed spacer (ITS) region as a universal DNA barcode marker for Fungi

    NARCIS (Netherlands)

    Schoch, C.L.; Seifert, K.A.; Huhndorf, S.; Robert, V.; Spouge, J.L.; Levesque, C.A.; Chen, W.; Fungal Barcoding Consortium, [No Value

    2012-01-01

    Six DNA regions were evaluated as potential DNA barcodes for Fungi, the second largest kingdom of eukaryotic life, by a multinational, multilaboratory consortium. The region of the mitochondrial cytochrome c oxidase subunit 1 used as the animal barcode was excluded as a potential marker, because it

  9. Nucleotide sequence database comparison for Internal Transcribed Spacer 2 genetic region DNA barcode dermatophyte routine identification.

    Science.gov (United States)

    Normand, A C; Packeu, A; Cassagne, C; Hendrickx, M; Ranque, S; Piarroux, R

    2018-02-28

    Conventional dermatophyte identification is based on morphological features. However, recent studies have proposed to use the nucleotide sequences of the rRNA ITS region as an identification barcode of all fungi, including dermatophytes. Several nucleotide databases are available to compare sequences and thus identify isolates; however, these databases often contain mislabeled sequences that impair sequence-based identification.We evaluated five of these databases on a clinical isolate panel. We selected 292 clinical dermatophyte strains that were prospectively subjected to ITS2 nucleotide sequence analysis. Sequences were analyzed against the databases, and the results were compared to clusters obtained via DNA alignment of sequence segments. The DNA tree served as the identification standard throughout the study.According to the ITS2 sequence identification, the majority of strains (255/292) belonged to the genus Trichophyton , mainly T. rubrum complex (n=184), T. interdigitale (n=40), T. tonsurans (n=26) and T. benhamiae (n=5). Other genera included Microsporum (e.g., M canis (n=21), M. audouinii (n=10) and Nannizzia gypseum (n=3), and Epidermophyton (n=3)). Species-level identification of T. rubrum complex isolates was an issue.Overall, ITS DNA sequencing is a reliable tool to identify dermatophyte species given that a comprehensive and correctly-labeled database is consulted. As many inaccurate identification results exist in the DNA databases used for this study, reference databases must be verified frequently and amended in line with the current revisions of fungal taxonomy. Before describing a new species or adding a new DNA reference to the available databases, its position in the phylogenetic tree must be verified. Copyright © 2018 American Society for Microbiology.

  10. Maternal oral origin of Fusobacterium nucleatum in adverse pregnancy outcomes as determined using the 16S-23S rRNA gene intergenic transcribed spacer region.

    Science.gov (United States)

    Gonzales-Marin, Cecilia; Spratt, David A; Allaker, Robert P

    2013-01-01

    Fusobacterium nucleatum, a common Gram-negative anaerobe prevalent in the oral cavity, possesses the ability to colonize the amniotic cavity and the fetus. However, F. nucleatum may also be part of the vaginal microbiota from where it could reach the amniotic tissues. Due to the heterogeneity of F. nucleatum, consisting of five subspecies, analysis at the subspecies/strain level is desirable to determine its precise origin. The aims of this study were: (i) to evaluate the use of the 16S-23S rRNA gene intergenic transcribed spacer (ITS) region as a tool to differentiate subspecies of F. nucleatum, and (ii) to design a simplified technique based on the ITS to determine the origin of F. nucleatum strains associated with adverse pregnancy outcomes. Amplified fragments of the 16S-23S rRNA gene ITS region corresponding to the five subspecies of F. nucleatum were subjected to cloning and sequencing to characterize the different ribosomal operons of the subspecies. Distinctive length and sequence patterns with potential to be used for identification of the subspecies/strain were identified. These were used to evaluate the origin of F. nucleatum identified in neonatal gastric aspirates (swallowed amniotic fluid) by sequence comparisons with the respective oral and vaginal maternal samples. A simplified technique using a strain-specific primer in a more sensitive nested PCR was subsequently developed to analyse ten paired neonatal-maternal samples. Analysing the variable fragment of the ITS region allowed the identification of F. nucleatum subsp. polymorphum from an oral origin as potentially being involved in neonatal infections. Using a strain-specific primer, the F. nucleatum subsp. polymorphum strain was detected in both neonatal gastric aspirates and maternal oral samples in cases of preterm birth from mothers presenting with localized periodontal pockets. Interestingly, the same strain was not present in the vaginal sample of any case investigated. The 16S-23S r

  11. Intergenic spacer length variants in Old Portuguese bread wheat ...

    Indian Academy of Sciences (India)

    2011-08-19

    Aug 19, 2011 ... and the termination of the transcription (McMullen et al. 1986; Suzuki et al. 1996; Abdulova and Ananiev 2003). The non-coding rDNA spacers (IGS and the internal transcribed spacer (ITS)) could be substantially variable in size due to differences in the number of repetitive elements among the closely ...

  12. Intergenic and external transcribed spacers of ribosomal RNA genes in lizard-infecting Leishmania: molecular structure and phylogenetic relationship to mammal-infecting Leishmania in the subgenus Leishmania (Leishmania

    Directory of Open Access Journals (Sweden)

    Orlando Tereza C

    2002-01-01

    Full Text Available To establish the relationships of the lizard- and mammal-infecting Leishmania, we characterized the intergenic spacer region of ribosomal RNA genes from L. tarentolae and L. hoogstraali. The organization of these regions is similar to those of other eukaryotes. The intergenic spacer region was approximately 4 kb in L. tarentolae and 5.5 kb in L. hoogstraali. The size difference was due to a greater number of 63-bp repetitive elements in the latter species. This region also contained another element, repeated twice, that had an inverted octanucleotide with the potential to form a stem-loop structure that could be involved in transcription termination or processing events. The ribosomal RNA gene localization showed a distinct pattern with one chromosomal band (2.2 Mb for L. tarentolae and two (1.5 and 1.3 Mb for L. hoogstraali. The study also showed sequence differences in the external transcribed region that could be used to distinguish lizard Leishmania from the mammalian Leishmania. The intergenic spacer region structure features found among Leishmania species indicated that lizard and mammalian Leishmania are closely related and support the inclusion of lizard-infecting species into the subgenus Sauroleishmania proposed by Saf'janova in 1982.

  13. Sequence variation of the first internal spacer (ITS-1) of ribosomal DNA in ahermatypic corals from California.

    Science.gov (United States)

    Beauchamp, K A; Powers, D A

    1996-12-01

    Interspecific and intraspecific variation in the first internal transcribed spacer region (ITS-1) of ribosomal DNA (rDNA) was examined in two species of ahermatypic corals (lacking symbiotic algae and non-reef-building) with different dispersal characteristics, Paracyathus stearnsii (gamete-spawner with pelagic larvae) and Balanophyllia elegans (brooder with benthic larvae) from California. An approximately 300-bp region of the ITS-1 was amplified by polymerase chain reaction (PCR) and sequenced from populations at Pt. Loma, La Jolla, Monterey Bay, and Santa Catalina Island and compared for each species and compared with the same region from the hermatypic coral Favia lizardensis. There was a wide range of sequence variation in the ITS-1 region between the species, and these differences readily distinguished the taxa. Intraspecific comparisons of P. stearnsii individuals showed very little sequence variation (two polymorphisms) in the ITS-1 region. In contrast to P. stearnsii, we found 14 variable nucleotide sties in the ITS-1 region for B. elegans. Although there were no nucleotide sites that diagnostically separated central and southern populations, these findings indicate that the ITS-1 region is variable in B. elegans and a promising source for nuclear molecular markers in ahermatypic corals.

  14. Nucleotide sequences of ribosomal internal transcribed spacers and their utility in distinguishing closely related Perinereis polychaets (Annelida; Polychaeta; Nereididae).

    Science.gov (United States)

    Chen, Chaolun Allen; Chen, Chang-Po; Fan, Tung-Yung; Yu, Jr-Kai; Hsieh, Hwey-Lian

    2002-01-01

    Nucleotide sequences of a segment of the rRNA transcription unit spanning from the 3' end of the 18S rDNA to the 5' end of 28S rDNA were determined for four species of Perinereis polychaetes: P. aibuhitensis, P. floridana, and two undescribed species, Perinereis sp1 and sp2. The 5.8S rDNA sequences are identical among the four species. Intraspecific variability was low with the Kimura 2-parameter (K2P) distance, ranging from 0 to 0.0138 for ITS1 and 0 to 0.0247 for ITS2. The interspecific nucleotide difference was significantly higher than those within species, with a mean K2P of 0.172 for ITS1 and 0.204 for ITS2, suggesting that comparisons of ITS regions can be used to evaluate the phylogenetic relationships among Perinereis species. Both neighbor-joining and parsimony analyses of ITS variability indicate a close relationship between the two undescribed species of Perinereis. These findings highlight the utility of the ITS sequence in conjunction with other morphological and ecological characters to delineate species boundaries among closely related polychaetes.

  15. A microarray for screening the variability of 16S–23S rRNA internal transcribed spacer in Pseudomonas syringae

    Czech Academy of Sciences Publication Activity Database

    Lenz, Ondřej; Beran, Pavel; Fousek, Jan; Mráz, Ivan

    2010-01-01

    Roč. 82, č. 1 (2010), s. 90-94 ISSN 0167-7012 R&D Projects: GA ČR GP522/07/P338 Institutional research plan: CEZ:AV0Z50510513 Keywords : microarray * ITS1 * mosaicism Subject RIV: EE - Microbiology, Virology Impact factor: 2.018, year: 2010

  16. The 'rare allele phenomenon' in a ribosomal spacer

    NARCIS (Netherlands)

    Schilthuizen, M.; Hoekstra, R.F.; Gittenberger, E.

    2001-01-01

    We describe the increased frequency of a particular length variant of the internal transcribed spacer 1 (ITS-1) of the ribosomal DNA in a hybrid zone of the land snail Albinaria hippolyti. The phenomenon that normally rare alleles or other markers can increase in frequency in the centre of hybrid

  17. Transcribing for Greater Musicality.

    Science.gov (United States)

    Hinz, Bob

    1995-01-01

    States that transcribing is notating the performance of a musical composition or improvisation as the music is grasped aurally. Maintains that transcribing is effective for high school and college students who want to understand jazz techniques. Includes eight suggestions for teaching transcribing. (CFR)

  18. Phylogenetic reconstruction using secondary structures of Internal Transcribed Spacer 2 (ITS2, rDNA: finding the molecular and morphological gap in Caribbean gorgonian corals

    Directory of Open Access Journals (Sweden)

    Sánchez Juan A

    2007-06-01

    Full Text Available Abstract Background Most phylogenetic studies using current methods have focused on primary DNA sequence information. However, RNA secondary structures are particularly useful in systematics because they include characteristics, not found in the primary sequence, that give "morphological" information. Despite the number of recent molecular studies on octocorals, there is no consensus opinion about a region that carries enough phylogenetic resolution to solve intrageneric or close species relationships. Moreover, intrageneric morphological information by itself does not always produce accurate phylogenies; intra-species comparisons can reveal greater differences than intra-generic ones. The search for new phylogenetic approaches, such as by RNA secondary structure analysis, is therefore a priority in octocoral research. Results Initially, twelve predicted RNA secondary structures were reconstructed to provide the basic information for phylogenetic analyses; they accorded with the 6 helicoidal ring model, also present in other groups of corals and eukaryotes. We obtained three similar topologies for nine species of the Caribbean gorgonian genus Eunicea (candelabrum corals with two sister taxa as outgroups (genera Plexaura and Pseudoplexaura on the basis of molecular morphometrics of ITS2 RNA secondary structures only, traditional primary sequence analyses and maximum likelihood, and a Bayesian analysis of the combined data. The latter approach allowed us to include both primary sequence and RNA molecular morphometrics; each data partition was allowed to have a different evolution rate. In addition, each helix was partitioned as if it had evolved at a distinct rate. Plexaura flexuosa was found to group within Eunicea; this was best supported by both the molecular morphometrics and combined analyses. We suggest Eunicea flexuosa (Lamouroux, 1821 comb. nov., and we present a new species description including Scanning Electron Microscopy (SEM images of morphological characteristics (sclerites. Eunicea flexuosa, E. pallida, E. laxispica and E. mammosa formed a separate clade in the molecular phylogenies, and were reciprocally monophyletic with respect to other Eunicea (Euniceopsis subgenus, e.g. E. tourneforti and E. laciniata in the molecular morphometrics tree, with the exception of E. fusca. Moreover, we suggest a new diagnostic character for Eunicea, also present in E. flexuosa: middle layer sclerites > 1 mm in length. Conclusion ITS2 was a reliable sequence for intrageneric studies in gorgonian octocorals because of the amount of phylogenetic signal, and was corroborated against morphological characters separating Eunicea from Plexaura. The ITS2 RNA secondary structure approach to phylogeny presented here did not rely on alignment methods such as INDELS, but provided clearly homologous characters for partition analysis and RNA molecular morphometrics. These approaches support the divergence of Eunicea flexuosa comb. nov. from the outgroup Plexaura, although it has been considered part of this outgroup for nearly two centuries because of morphological resemblance.

  19. A paraphyly of the genus Bothriocephalus Rudolphi, 1808 (Cestoda: Pseudophyllidea) inferred from internal transcribed spacer-2 and 18S ribosomal DNA sequences

    Czech Academy of Sciences Publication Activity Database

    Škeříková, Andrea; Hypša, Václav; Scholz, Tomáš

    2004-01-01

    Roč. 90, č. 3 (2004), s. 612-617 ISSN 0022-3395 R&D Projects: GA ČR GA524/01/1314; GA ČR GA524/04/0342; GA AV ČR KSK6005114 Institutional research plan: CEZ:AV0Z6022909 Keywords : Cestoda * Pseudophyllidea * phylogeny Subject RIV: GJ - Animal Vermins ; Diseases, Veterinary Medicine Impact factor: 1.439, year: 2004

  20. Phylogenetic reconstruction using secondary structures of Internal Transcribed Spacer 2 (ITS2, rDNA): finding the molecular and morphological gap in Caribbean gorgonian corals

    Science.gov (United States)

    Grajales, Alejandro; Aguilar, Catalina; Sánchez, Juan A

    2007-01-01

    Background Most phylogenetic studies using current methods have focused on primary DNA sequence information. However, RNA secondary structures are particularly useful in systematics because they include characteristics, not found in the primary sequence, that give "morphological" information. Despite the number of recent molecular studies on octocorals, there is no consensus opinion about a region that carries enough phylogenetic resolution to solve intrageneric or close species relationships. Moreover, intrageneric morphological information by itself does not always produce accurate phylogenies; intra-species comparisons can reveal greater differences than intra-generic ones. The search for new phylogenetic approaches, such as by RNA secondary structure analysis, is therefore a priority in octocoral research. Results Initially, twelve predicted RNA secondary structures were reconstructed to provide the basic information for phylogenetic analyses; they accorded with the 6 helicoidal ring model, also present in other groups of corals and eukaryotes. We obtained three similar topologies for nine species of the Caribbean gorgonian genus Eunicea (candelabrum corals) with two sister taxa as outgroups (genera Plexaura and Pseudoplexaura) on the basis of molecular morphometrics of ITS2 RNA secondary structures only, traditional primary sequence analyses and maximum likelihood, and a Bayesian analysis of the combined data. The latter approach allowed us to include both primary sequence and RNA molecular morphometrics; each data partition was allowed to have a different evolution rate. In addition, each helix was partitioned as if it had evolved at a distinct rate. Plexaura flexuosa was found to group within Eunicea; this was best supported by both the molecular morphometrics and combined analyses. We suggest Eunicea flexuosa (Lamouroux, 1821) comb. nov., and we present a new species description including Scanning Electron Microscopy (SEM) images of morphological characteristics (sclerites). Eunicea flexuosa, E. pallida, E. laxispica and E. mammosa formed a separate clade in the molecular phylogenies, and were reciprocally monophyletic with respect to other Eunicea (Euniceopsis subgenus, e.g. E. tourneforti and E. laciniata) in the molecular morphometrics tree, with the exception of E. fusca. Moreover, we suggest a new diagnostic character for Eunicea, also present in E. flexuosa: middle layer sclerites > 1 mm in length. Conclusion ITS2 was a reliable sequence for intrageneric studies in gorgonian octocorals because of the amount of phylogenetic signal, and was corroborated against morphological characters separating Eunicea from Plexaura. The ITS2 RNA secondary structure approach to phylogeny presented here did not rely on alignment methods such as INDELS, but provided clearly homologous characters for partition analysis and RNA molecular morphometrics. These approaches support the divergence of Eunicea flexuosa comb. nov. from the outgroup Plexaura, although it has been considered part of this outgroup for nearly two centuries because of morphological resemblance. PMID:17562014

  1. Population Structure of the Primary Malaria Vector in South America, Anopheles darlingi, Using Isozyme, Random Amplified Polymorphic DNA, Internal Transcribed Spacer 2, and Morphologic Markers

    Science.gov (United States)

    1999-01-01

    401 16 to Jan E. Conn for the ITS2 sequencing, by Consejo National de Investigaciones Cientificas y Tecnologicas (MPS-RPIV-130032-9), and the Pan... Investigaciones , Escuela de Malariologia y Saneamiento Ambiental, Maracay, Venezuela Abstract. A genetic and morphologic survey of Anopheles darlingi...0086. Yasmin Rubio-Palis, Division de Investigaciones , Escuela de Malariologia y Saneamiento Ambiental Dr. Arnold0 Ga- baldon, Apartado 2073

  2. Development of a PCR assay based on the 16S-23S rDNA internal transcribed spacer for identification of strictly anaerobic bacterium Zymophilus

    Czech Academy of Sciences Publication Activity Database

    Felsberg, Jürgen; Jelínková, Markéta; Kubizniaková, P.; Matoulková, D.

    2015-01-01

    Roč. 33, June (2015), s. 85-89 ISSN 1075-9964 Institutional support: RVO:61388971 Keywords : Brewing microbiology * Strictly anaerobic bacteria * Yeast contamination Subject RIV: GM - Food Processing Impact factor: 2.424, year: 2015

  3. Fuel spacer

    International Nuclear Information System (INIS)

    Nishida, Koji; Yokomizo, Osamu; Kanazawa, Toru; Kashiwai, Shin-ichi; Orii, Akihito.

    1992-01-01

    The present invention concerns a fuel spacer for a fuel assembly of a BWR type reactor and a PTR type reactor. Springs each having a vane are disposed on the side surface of a circular cell which supports a fuel rods. A vortex streams having a vertical component are formed by the vanes in the flowing direction of a flowing channel between adjacent cylindrical cells. Liquid droplets carried by streams are deposited on liquid membrane streams flowing along the fuel rod at the downstream of the spacer by the vortex streams. In view of the above, the liquid droplets can be deposited to the fuel rod without increasing the amount of metal of the spacer. Accordingly, the thermal margin of the fuel assembly can be improved without losing neutron economy. (I.N.)

  4. Diversity and Inheritance of Intergenic Spacer Sequences of 45S Ribosomal DNA among Accessions of Brassica oleracea L. var. capitata

    Directory of Open Access Journals (Sweden)

    Kiwoung Yang

    2015-12-01

    Full Text Available Ribosomal DNA (rDNA of plants is present in high copy number and shows variation between and within species in the length of the intergenic spacer (IGS. The 45S rDNA of flowering plants includes the 5.8S, 18S and 25S rDNA genes, the internal transcribed spacer (ITS1 and ITS2, and the intergenic spacer 45S-IGS (25S-18S. This study identified six different types of 45S-IGS, A to F, which at 363 bp, 1121 bp, 1717 bp, 1969 bp, 2036 bp and 2111 bp in length, respectively, were much shorter than the reported reference IGS sequences in B. oleracea var. alboglabra. The shortest two IGS types, A and B, lacked the transcription initiation site, non-transcribed spacer, and external transcribed spacer. Functional behavior of those two IGS types in relation to rRNA synthesis is a subject of further investigation. The other four IGSs had subtle variations in the transcription termination site, guanine-cytosine (GC content, and number of tandem repeats, but the external transcribed spacers of these four IGSs were quite similar in length. The 45S IGSs were found to follow Mendelian inheritance in a population of 15 F1s and their 30 inbred parental lines, which suggests that these sequences could be useful for development of new breeding tools. In addition, this study represents the first report of intra-specific (within subspecies variation of the 45S IGS in B. oleracea.

  5. Diversity and Inheritance of Intergenic Spacer Sequences of 45S Ribosomal DNA among Accessions of Brassica oleracea L. var. capitata.

    Science.gov (United States)

    Yang, Kiwoung; Robin, Arif Hasan Khan; Yi, Go-Eun; Lee, Jonghoon; Chung, Mi-Young; Yang, Tae-Jin; Nou, Ill-Sup

    2015-12-03

    Ribosomal DNA (rDNA) of plants is present in high copy number and shows variation between and within species in the length of the intergenic spacer (IGS). The 45S rDNA of flowering plants includes the 5.8S, 18S and 25S rDNA genes, the internal transcribed spacer (ITS1 and ITS2), and the intergenic spacer 45S-IGS (25S-18S). This study identified six different types of 45S-IGS, A to F, which at 363 bp, 1121 bp, 1717 bp, 1969 bp, 2036 bp and 2111 bp in length, respectively, were much shorter than the reported reference IGS sequences in B. oleracea var. alboglabra. The shortest two IGS types, A and B, lacked the transcription initiation site, non-transcribed spacer, and external transcribed spacer. Functional behavior of those two IGS types in relation to rRNA synthesis is a subject of further investigation. The other four IGSs had subtle variations in the transcription termination site, guanine-cytosine (GC) content, and number of tandem repeats, but the external transcribed spacers of these four IGSs were quite similar in length. The 45S IGSs were found to follow Mendelian inheritance in a population of 15 F₁s and their 30 inbred parental lines, which suggests that these sequences could be useful for development of new breeding tools. In addition, this study represents the first report of intra-specific (within subspecies) variation of the 45S IGS in B. oleracea.

  6. Structure of mouse rRNA precursors. Complete sequence and potential folding of the spacer regions between 18S and 28S rRNA.

    OpenAIRE

    Michot, B; Bachellerie, J P; Raynal, F

    1983-01-01

    We have determined the complete nucleotide sequence of the regions of mouse ribosomal RNA transcription unit which separate mature rRNA genes. These internal transcribed spacers (ITS) are excised from rRNA precursor during ribosome biosynthesis. ITS 1, between 18S and 5.8S rRNA genes, is 999 nucleotides long. ITS 2, between 5.8S and 28S rRNA genes, is 1089 nucleotides long. Both spacers are very rich in G + C, 70 and 74% respectively. Mouse sequences have been compared with the other availabl...

  7. Molecular analysis of the 16S-23S rDNA internal spacer region (ISR) and truncated tRNA(Ala) gene segments in Campylobacter lari.

    Science.gov (United States)

    Hayashi, K; Tazumi, A; Nakanishi, S; Nakajima, T; Matsubara, K; Ueno, H; Moore, J E; Millar, B C; Matsuda, M

    2012-06-01

    Following PCR amplification and sequencing, nucleotide sequence alignment analyses demonstrated the presence of two kinds of 16S-23S rDNA internal spacer regions (ISRs), namely, long length ISRs of 837-844 base pair (bp) [n = six for urease-negative (UN) Campylobacter lari isolates, UN C. lari JCM2530(T), RM2100, 176, 293, 299 and 448] and short length ISRs of 679-725 bp [n = six for UN C. lari: n = 14 for urease-positive thermophilic Campylobacter (UPTC) isolates]. The analyses also indicated that the short length ISRs mainly lacked the 156 bp sequence from the nucleotide positions 122-277 bp in long length ISRs for UN C. lari JCM2530(T). The 156 bp sequences shared 94.9-96.8 % sequence similarity among six isolates. Surprisingly, atypical tRNA(Ala) gene segment (5' end 35 bp), which was extremely truncated, occurred within the 156 bp sequences in the long length ISRs, as an unexpected tRNA(Ala) pseudogene. An order of the intercistronic tRNA genes within the short nucleotide spacer of 5'-16S rDNA-tRNA(Ala)-tRNA(Ile)-23S rDNA-3' occurred in all the C. lari isolates examined.

  8. Molecular phylogeny of Ranunculaceae based on internal ...

    African Journals Online (AJOL)

    The botanical family Ranunculaceae contains important medicinal plants. To obtain new evolutionary evidence regarding the systematic classification of Ranunculaceae plants, we used molecular phylogenies to test relationships based on the internal transcribed spacer region. The results of phylogenetic analysis of 92 ...

  9. Molecular phylogeny of Ranunculaceae based on internal ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-10-19

    Oct 19, 2009 ... The botanical family Ranunculaceae contains important medicinal plants. To obtain new evolutionary evidence regarding the systematic classification of Ranunculaceae plants, we used molecular phylogenies to test relationships based on the internal transcribed spacer region. The results of phylogenetic ...

  10. Spacer st4ructure

    International Nuclear Information System (INIS)

    Masetti, W.R.

    1978-01-01

    A spacer structure is described for maintaining a spaced relation between a plurality of generally parallel fuel rods within a housing in a nuclear reactor. The spacer structure is comprised of a grid pattern of ribs slotted to interlock with each other. The slots are arranged in such a way that when the ribs are welded to each other, the weld shrinkage is distributed uniformly in all directions to reduce or eliminate the amount of rework necessary in manufacturing the spacer structure

  11. Molecular characterization of the sequences of the 16S-23S rDNA internal spacer region (ISR) from isolates of Taylorella asinigenitalis.

    Science.gov (United States)

    Tazumi, Akihiro; Ono, Shinji; Sekizuka, Tsuyoshi; Moore, John E; Millar, B Cherie; Matsuda, Motoo

    2009-03-03

    Sequence information on the 16S-23S rDNA internal spacer region (ISR) exhibits a large degree of sequence and length variation at both the genus and species levels. A primer pair for the amplification of 16S-23S rDNA ISR generated three amplicons for each of isolates of Taylorella asinigenitalis (UCD-1T, UK-1 and UK-2). Following TA cloning and sequencing, the three isolates of T. asinigenitalis were demonstrated to possess three ISR units of different lengths. Although the three corresponding ISRs (A, B and C) were identified to be identical to each other (UK-1 and UK-2 isolates), the ISRs shared approximately 95.3-98.9% nucleotide sequence similarities between the UCD-1T and UK-1/-2 isolates. A typical order of two intercistronic tRNA genes (5'-tRNAIle-tRNAAla-3') with the different nucleotide spacers [44 through 51 base pairs (bp)] in length was identified among the isolates. The consensus sequences of the antiterminators of boxB and boxA were also identified in all ISRs. Thus, three ISRs were identified for each isolate, and therefore, at least three distinctly different ribosomal RNA operons were suggested to occur in the genome of T. asinigenitalis. This was also confirmed by Southern hybridization procedure. The present study represents a dendrogram constructed based on the nucleotide sequence data of 16S-23S rDNA ISR for T. asinigenitalis, which may aid in the phylogenetic positioning of T. asinigenitalis within the genus Taylorella, and in the molecular discrimination of T. asinigenitalis.

  12. Molecular characterization of the sequences of the 16S-23S rDNA internal spacer region (ISR from isolates of Taylorella asinigenitalis

    Directory of Open Access Journals (Sweden)

    Millar B Cherie

    2009-03-01

    Full Text Available Abstract Background Sequence information on the 16S-23S rDNA internal spacer region (ISR exhibits a large degree of sequence and length variation at both the genus and species levels. A primer pair for the amplification of 16S-23S rDNA ISR generated three amplicons for each of isolates of Taylorella asinigenitalis (UCD-1T, UK-1 and UK-2. Findings Following TA cloning and sequencing, the three isolates of T. asinigenitalis were demonstrated to possess three ISR units of different lengths. Although the three corresponding ISRs (A, B and C were identified to be identical to each other (UK-1 and UK-2 isolates, the ISRs shared approximately 95.3–98.9% nucleotide sequence similarities between the UCD-1T and UK-1/-2 isolates. A typical order of two intercistronic tRNA genes (5'-tRNAIle-tRNAAla-3' with the different nucleotide spacers [44 through 51 base pairs (bp] in length was identified among the isolates. The consensus sequences of the antiterminators of boxB and boxA were also identified in all ISRs. Thus, three ISRs were identified for each isolate, and therefore, at least three distinctly different ribosomal RNA operons were suggested to occur in the genome of T. asinigenitalis. This was also confirmed by Southern hybridization procedure. Conclusion The present study represents a dendrogram constructed based on the nucleotide sequence data of 16S-23S rDNA ISR for T. asinigenitalis, which may aid in the phylogenetic positioning of T. asinigenitalis within the genus Taylorella, and in the molecular discrimination of T. asinigenitalis.

  13. Mixing vane grid spacer

    International Nuclear Information System (INIS)

    Patterson, J.F.; Galbraith, K.P.

    1978-01-01

    An improved mixing vane grid spacer having enhanced flow mixing capability by virtue of mixing vanes being positioned at welded intersecting joints of the spacer wherein each mixing vane has an opening or window formed therein substantially directly over the welded joint to provide improved flow mixing capability is described. Some of the vanes are slotted, depending on their particular location in the spacers. The intersecting joints are welded by initially providing consumable tabs at and within each window, which are consumed during the welding of the spacer joints

  14. Fouling resistant membrane spacers

    KAUST Repository

    Ghaffour, Noreddine

    2017-10-12

    Disclosed herein are spacers having baffle designs and perforations for efficiently and effectively separating one or more membrane layers a membrane filtration system. The spacer (504) includes a body (524) formed at least in part by baffles (520) that are interconnected, and the baffles define boundaries of openings or apertures (525) through a thickness direction of the body of the spacer. Alternatively or additionally, passages or perforations (526A, 526B) may be present in the spacer layer or baffles for fluid flow there through, with the passages and baffles having a numerous different shapes and sizes.

  15. Structural Stator Spacers

    DEFF Research Database (Denmark)

    Rasmussen, Peter Omand; Andreasen, Jens H.; Pijanowski, J. M.

    2001-01-01

    This paper presents a powerful new design aspect to reduce acoustic noise and vibration of electro-magnetic origin for electrical machines, by introducing improved slot wedges referred to as "Structural Stator Spacers". These spacers, by using a very stiff dielectric and non magnetic material, a ...

  16. Reconstruction of phylogenetic relationships in dermatomycete genus Trichophyton Malmsten 1848 based on ribosomal internal transcribed spacer region, partial 28S rRNA and beta-tubulin genes sequences.

    Science.gov (United States)

    Pchelin, Ivan M; Zlatogursky, Vasily V; Rudneva, Mariya V; Chilina, Galina A; Rezaei-Matehkolaei, Ali; Lavnikevich, Dmitry M; Vasilyeva, Natalya V; Taraskina, Anastasia E

    2016-09-01

    Trichophyton spp. are important causative agents of superficial mycoses. The phylogeny of the genus and accurate strain identification, based on the ribosomal ITS region sequencing, are still under development. The present work is aimed at (i) inferring the genus phylogeny from partial ITS, LSU and BT2 sequences (ii) description of ribosomal ITS region polymorphism in 15 strains of Trichophyton interdigitale. We performed DNA sequence-based species identification and phylogenetic analysis on 48 strains belonging to the genus Trichophyton. Phylogenetic relationships were inferred by maximum likelihood and Bayesian methods on concatenated ITS, LSU and BT2 sequences. Ribosomal ITS region polymorphisms were assessed directly on the alignment. By phylogenetic reconstruction, we reveal major anthropophilic and zoophilic species clusters in the genus Trichophyton. We describe several sequences of the ITS region of T. interdigitale, which do not fit in the traditional polymorphism scheme and propose emendations in this scheme for discrimination between ITS sequence types in T. interdigitale. The new polymorphism scheme will allow inclusion of a wider spectrum of isolates while retaining its explanatory power. This scheme was also found to be partially congruent with NTS typing technique. © 2016 Blackwell Verlag GmbH.

  17. Insertions or deletions (Indels) in the rrn 16S-23S rRNA gene internal transcribed spacer region (ITS) compromise the typing and identification of strains within the Acinetobacter calcoaceticus-baumannii (Acb) complex and closely related members.

    Science.gov (United States)

    Maslunka, Christopher; Gifford, Bianca; Tucci, Joseph; Gürtler, Volker; Seviour, Robert J

    2014-01-01

    To determine whether ITS sequences in the rrn operon are suitable for identifying individual Acinetobacter Acb complex members, we analysed length and sequence differences between multiple ITS copies within the genomes of individual strains. Length differences in ITS reported previously between A. nosocomialis BCRC15417T (615 bp) and other strains (607 bp) can be explained by presence of an insertion (indel 13i/1) in the longer ITS variant. The same Indel 13i/1 was also found in ITS sequences of ten strains of A. calcoaceticus, all 639 bp long, and the 628 bp ITS of Acinetobacter strain BENAB127. Four additional indels (13i/2-13i/5) were detected in Acinetobacter strain c/t13TU 10090 ITS length variants (608, 609, 620, 621 and 630 bp). These ITS variants appear to have resulted from horizontal gene transfer involving other Acinetobacter species or in some cases unrelated bacteria. Although some ITS copies in strain c/t13TU 10090 are of the same length (620 bp) as those in Acinetobacter strains b/n1&3, A. pittii (10 strains), A. calcoaceticus and A. oleivorans (not currently acknowledged as an Acb member), their individual ITS sequences differ. Thus ITS length by itself can not by itself be used to identify Acb complex strains. A shared indel in ITS copies in two separate Acinetobacter species compromises the specificity of ITS targeted probes, as shown with the Aun-3 probe designed to target the ITS in A. pitti. The presence of indel 13i/5 in the ITS of Acinetobacter strain c/t13TU means it too responded positively to this probe. Thus, neither ITS sequencing nor the currently available ITS targeted probes can distinguish reliably between Acb member species.

  18. Insertions or deletions (Indels in the rrn 16S-23S rRNA gene internal transcribed spacer region (ITS compromise the typing and identification of strains within the Acinetobacter calcoaceticus-baumannii (Acb complex and closely related members.

    Directory of Open Access Journals (Sweden)

    Christopher Maslunka

    Full Text Available To determine whether ITS sequences in the rrn operon are suitable for identifying individual Acinetobacter Acb complex members, we analysed length and sequence differences between multiple ITS copies within the genomes of individual strains. Length differences in ITS reported previously between A. nosocomialis BCRC15417T (615 bp and other strains (607 bp can be explained by presence of an insertion (indel 13i/1 in the longer ITS variant. The same Indel 13i/1 was also found in ITS sequences of ten strains of A. calcoaceticus, all 639 bp long, and the 628 bp ITS of Acinetobacter strain BENAB127. Four additional indels (13i/2-13i/5 were detected in Acinetobacter strain c/t13TU 10090 ITS length variants (608, 609, 620, 621 and 630 bp. These ITS variants appear to have resulted from horizontal gene transfer involving other Acinetobacter species or in some cases unrelated bacteria. Although some ITS copies in strain c/t13TU 10090 are of the same length (620 bp as those in Acinetobacter strains b/n1&3, A. pittii (10 strains, A. calcoaceticus and A. oleivorans (not currently acknowledged as an Acb member, their individual ITS sequences differ. Thus ITS length by itself can not by itself be used to identify Acb complex strains. A shared indel in ITS copies in two separate Acinetobacter species compromises the specificity of ITS targeted probes, as shown with the Aun-3 probe designed to target the ITS in A. pitti. The presence of indel 13i/5 in the ITS of Acinetobacter strain c/t13TU means it too responded positively to this probe. Thus, neither ITS sequencing nor the currently available ITS targeted probes can distinguish reliably between Acb member species.

  19. Applicability of the 16S-23S rDNA internal spacer for PCR detection of the phytostimulatory PGPR inoculant Azospirillum lipoferum CRT1 in field soil.

    Science.gov (United States)

    Baudoin, E; Couillerot, O; Spaepen, S; Moënne-Loccoz, Y; Nazaret, S

    2010-01-01

    To assess the applicability of the 16S-23S rDNA internal spacer regions (ISR) as targets for PCR detection of Azospirillum ssp. and the phytostimulatory plant growth-promoting rhizobacteria seed inoculant Azospirillum lipoferum CRT1 in soil. Primer sets were designed after sequence analysis of the ISR of A. lipoferum CRT1 and Azospirillum brasilense Sp245. The primers fAZO/rAZO targeting the Azospirillum genus successfully yielded PCR amplicons (400-550 bp) from Azospirillum strains but also from certain non-Azospirillum strains in vitro, therefore they were not appropriate to monitor indigenous Azospirillum soil populations. The primers fCRT1/rCRT1 targeting A. lipoferum CRT1 generated a single 249-bp PCR product but could also amplify other strains from the same species. However, with DNA extracts from the rhizosphere of field-grown maize, both fAZO/rAZO and fCRT1/rCRT1 primer sets could be used to evidence strain CRT1 in inoculated plants by nested PCR, after a first ISR amplification with universal ribosomal primers. In soil, a 7-log dynamic range of detection (10(2)-10(8) CFU g(-1) soil) was obtained. The PCR primers targeting 16S-23S rDNA ISR sequences enabled detection of the inoculant A. lipoferum CRT1 in field soil. Convenient methods to monitor Azospirillum phytostimulators in the soil are lacking. The PCR protocols designed based on ISR sequences will be useful for detection of the crop inoculant A. lipoferum CRT1 under field conditions.

  20. Motif signatures of transcribed enhancers

    KAUST Repository

    Kleftogiannis, Dimitrios

    2017-09-14

    In mammalian cells, transcribed enhancers (TrEn) play important roles in the initiation of gene expression and maintenance of gene expression levels in spatiotemporal manner. One of the most challenging questions in biology today is how the genomic characteristics of enhancers relate to enhancer activities. This is particularly critical, as several recent studies have linked enhancer sequence motifs to specific functional roles. To date, only a limited number of enhancer sequence characteristics have been investigated, leaving space for exploring the enhancers genomic code in a more systematic way. To address this problem, we developed a novel computational method, TELS, aimed at identifying predictive cell type/tissue specific motif signatures. We used TELS to compile a comprehensive catalog of motif signatures for all known TrEn identified by the FANTOM5 consortium across 112 human primary cells and tissues. Our results confirm that distinct cell type/tissue specific motif signatures characterize TrEn. These signatures allow discriminating successfully a) TrEn from random controls, proxy of non-enhancer activity, and b) cell type/tissue specific TrEn from enhancers expressed and transcribed in different cell types/tissues. TELS codes and datasets are publicly available at http://www.cbrc.kaust.edu.sa/TELS.

  1. Structure of mouse rRNA precursors. Complete sequence and potential folding of the spacer regions between 18S and 28S rRNA.

    Science.gov (United States)

    Michot, B; Bachellerie, J P; Raynal, F

    1983-05-25

    We have determined the complete nucleotide sequence of the regions of mouse ribosomal RNA transcription unit which separate mature rRNA genes. These internal transcribed spacers (ITS) are excised from rRNA precursor during ribosome biosynthesis. ITS 1, between 18S and 5.8S rRNA genes, is 999 nucleotides long. ITS 2, between 5.8S and 28S rRNA genes, is 1089 nucleotides long. Both spacers are very rich in G + C, 70 and 74% respectively. Mouse sequences have been compared with the other available eukaryotes: while no homology is apparent with yeast or xenopus, mouse and rat ITS sequences have been largely conserved, with homologous segments interspersed with highly divergent tracts. Homology with rat is much more extensive for ITS 1 than for ITS 2. Tentative secondary structure models are proposed for the folding of these regions within rRNA precursor; they are closely related in mouse and rat.

  2. Nucleotide sequencing and analysis of 16S rDNA and 16S-23S rDNA internal spacer region (ISR) of Taylorella equigenitalis, as an important pathogen for contagious equine metritis (CEM).

    Science.gov (United States)

    Kagawa, S; Nagano, Y; Tazumi, A; Murayama, O; Millar, B C; Moore, J E; Matsuda, M

    2006-05-01

    The primer set for 16S rDNA amplified an amplicon of about 1500 bp in length for three strains of Taylorella equigenitalis (NCTC11184(T), Kentucky188 and EQ59). Sequence differences of the 16S rDNA among the six sequences, including three reference sequences, occurred at only a few nucleotide positions and thus, an extremely high sequence similarity of the 16S rDNA was first demonstrated among the six sequences. In addition, the primer set for 16S-23S rDNA internal spacer region (ISR) amplified two amplicons about 1300 bp and 1200 bp in length for the three strains. The ISRs were estimated to be about 920 bp in length for large ISR-A and about 830 bp for small ISR-B. Sequence alignment of the ISR-A and ISR-B demonstrated about 10 base differences between NCTC11184(T) and EQ59 and between Kentucky188 and EQ59. However, only minor sequence differences were demonstrated between the ISR-A and ISR-B from NCTC11184(T) and Kentucky188, respectively. A typical order of the intercistronic tRNAs with the 29 nucleotide spacer of 5'-16S rDNA-tRNA(Ile)-tRNA(Ala)-23S rDNA-3' was demonstrated in the all ISRs. The ISRs may be useful for the discrimination amongst isolates of T. equigenitalis if sequencing is employed.

  3. Spacer grid corner gusset

    International Nuclear Information System (INIS)

    Larson, J.G.

    1984-01-01

    There is provided a spacer grid for a bundle of longitudinally extending rods in spaced generally parallel relationship comprising spacing means for holding the rods in spaced generally parallel relationship; the spacing means includes at least one exterior grid strip circumscribing the bundle of rods along the periphery thereof; with at least one exterior grid strip having a first edge defining the boundary of the strip in one longitudinal direction and a second edge defining the boundary of the strip in the other longitudinal direction; with at least one exterior grid strip having at least one band formed therein parallel to the longitudinal direction; a plurality of corner gussets truncating each of a plurality of corners formed by at least one band and the first edge and the second edge

  4. Low DNA Sequence Diversity of the Intergenic Spacer 1 Region in the Human Skin Commensal Fungi Malassezia sympodialis and M. dermatis Isolated from Patients with Malassezia-Associated Skin Diseases and Healthy Subjects.

    Science.gov (United States)

    Cho, Otomi; Sugita, Takashi

    2016-12-01

    As DNA sequences of the intergenic spacer (IGS) region in the rRNA gene show remarkable intraspecies diversity compared with the small subunit, large subunit, and internal transcribed spacer region, the IGS region has been used as an epidemiological tool in studies on Malassezia globosa and M. restricta, which are responsible for the exacerbation of atopic dermatitis (AD) and seborrheic dermatitis (SD). However, the IGS regions of M. sympodialis and M. dermatis obtained from the skin of patients with AD and SD, as well as healthy subjects, lacked sequence diversity. Of the 105 M. sympodialis strains and the 40 M. dermatis strains, the sequences of 103 (98.1 %) and 39 (97.5 %), respectively, were identical. Thus, given the lack of intraspecies diversity in the IGS regions of M. sympodialis and M. dermatis, studies of the diversity of these species should be performed using appropriate genes and not the IGS.

  5. Spacer grid for fuel elements

    International Nuclear Information System (INIS)

    Hensolt, T.; Huenner, M.; Rau, P.; Veca, A.

    1978-01-01

    The spacer grid for fuel elements of a gas-cooled fast breeder reactor (but also for PWRs and BWRs) consists of a lattice field with dodecagonal meshes. These meshes are formed by three each adjacent hexagons grouped arround a central axis. The pairs of legs extending into the dodecagon and being staggered by 120 0 are designed as knubs with inclined abutting surfaces for the fuel rods. By this means there is formed a three-point bearing for centering the fuel rods. The spacer grid mentioned above is rough-worked from a single disc- resp. plate-shaped body (unfinished piece). (DG) [de

  6. Spacer grid for fuel elements

    International Nuclear Information System (INIS)

    Hensolt, T.; Huenner, M.; Rau, P.; Veca, A.

    1980-01-01

    The spacer grid for fuel elements of a gas-cooled fast breeder reactor (but also for PWRs and BWRs) consists of a lattice field with dodecagonal meshes. These meshes are formed by three each adjacent hexagons grouped arround a central axis. The pairs of legs extending into the dodecagon and being staggered by 120 are designed as knubs with inclined abutting surfaces for the fuel rods. By this means there is formed a three-point bearing for centering the fuel rods. The spacer grid mentioned above is rough-worked from a single disc- resp. plate-shaped body (unfinished piece). (orig.)

  7. Transcribing without Tears: A Guide to Transcribing and Editing Oral History Interviews.

    Science.gov (United States)

    Deering, Mary Jo; Pomeroy, Barbara

    This practical booklet, intended for those who are transcribing oral interviews into manuscript form, provides transcribing and editing guidelines that are particularly pertinent to oral history interviews. The major factor involved in a transcription is its editing. Editing is defined as making the material suitable for use by researchers and the…

  8. Effects of grid spacer with mixing vane on entrainments and depositions in two-phase annular flows

    Directory of Open Access Journals (Sweden)

    Akimaro Kawahara

    2015-06-01

    Full Text Available The effects of mixing vanes (MVs attached to a grid spacer on the characteristics of air–water annular flows were experimentally investigated. To know the effects, a grid spacer with or without MV was inserted in a vertical circular pipe of 16-mm internal diameter. For three cases (i.e., no spacer, spacer without MV, and spacer with MV, the liquid film thickness, liquid entrainment fraction, and deposition rate were measured by the constant current method, single liquid film extraction method, and double liquid film extraction method, respectively. The MVs significantly promote the re-deposition of liquid droplets in the gas core flow into the liquid film on the channel walls. The deposition mass transfer coefficient is three times higher for the spacer with MV than for the spacer without MV, even for cases 0.3-m downstream from the spacer. The liquid film thickness becomes thicker upstream and downstream for the spacer with MV, compared with the thickness for the spacer without MV and for the case with no spacer.

  9. Identification of Biomphalaria havanensis and Biomphalaria obstructa populations from Cuba using polymerase chain reaction and restriction fragment length polymorphism of the ribosomal RNA intergenic spacer

    Directory of Open Access Journals (Sweden)

    Teofânia HDA Vidigal

    2001-07-01

    Full Text Available In Cuba, several Biomphalaria species have been reported such as B. orbignyi, B. schrammi, B. helophila, B. havanensis and B. peregrina; only the latter three are considered as potential hosts of Schistosoma mansoni. The specific identification of Biomphalaria species is based on anatomical and morphological characters of genital organs and shells. The correct identification of these snails is complicated by the high variation in these characters, similarity among species and in some cases by the small size of the snails. In this paper, we reported the classical morphological identification, the use of PCR and RFLP analysis of the internal transcribed spacer region of the ribosomal RNA genes for molecular identification of seven snail populations from different localities in Cuba. Using morphological and molecular analysis, we showed that among the studied Cuban Biomphalaria populations only B. havanensis and B. obstructa species were found.

  10. Two pion correlation from SPACER

    International Nuclear Information System (INIS)

    Csoergoe, T.; Zimanyi, J.; Pratt, S.

    1989-12-01

    The correlation function for neutral and negative pions produced in ultrarelativistic heavy ion collisions was calculated without free parameters based on a space-time version of the LUND model, called SPACER: Simulation of Phase space distribution of Atomic nuclear Collisions in Energetic Reactions. This method includes the effect of Bose correlations for the emitted pion pair. Effects arising from correlations between space-time and momentum space distributions are investigated. The results are compared to the data of two different experiments. The role and interpretation of the chaocity parameter are discussed. (D.G.) 14 refs.; 4 figs

  11. Spacers for fuel rod clusters

    International Nuclear Information System (INIS)

    Jabsen, F.S.

    1978-01-01

    The proposition deals with the fixing of nuclear fuel element rods in a grid which consists of a number of crossed Zy-plates which form cells. The rectangular cells have projections which serve as spacers for the fuel rods. According to the invention there are additional butt straps which can be moved in such a way that insertion and extraction of the fuel rods can be done without obstruction and they can be spring-loaded hold in their final position. (UWI) [de

  12. Development of a High Performance Spacer Grid

    Energy Technology Data Exchange (ETDEWEB)

    Song, Kee Nam; Song, K. N.; Yoon, K. H. (and others)

    2007-03-15

    A spacer grid in a LWR fuel assembly is a key structural component to support fuel rods and to enhance the heat transfer from the fuel rod to the coolant. In this research, the main research items are the development of inherent and high performance spacer grid shapes, the establishment of mechanical/structural analysis and test technology, and the set-up of basic test facilities for the spacer grid. The main research areas and results are as follows. 1. 18 different spacer grid candidates have been invented and applied for domestic and US patents. Among the candidates 16 are chosen from the patent. 2. Two kinds of spacer grids are finally selected for the advanced LWR fuel after detailed performance tests on the candidates and commercial spacer grids from a mechanical/structural point of view. According to the test results the features of the selected spacer grids are better than those of the commercial spacer grids. 3. Four kinds of basic test facilities are set up and the relevant test technologies are established. 4. Mechanical/structural analysis models and technology for spacer grid performance are developed and the analysis results are compared with the test results to enhance the reliability of the models.

  13. Development of a High Performance Spacer Grid

    International Nuclear Information System (INIS)

    Song, Kee Nam; Song, K. N.; Yoon, K. H.

    2007-03-01

    A spacer grid in a LWR fuel assembly is a key structural component to support fuel rods and to enhance the heat transfer from the fuel rod to the coolant. In this research, the main research items are the development of inherent and high performance spacer grid shapes, the establishment of mechanical/structural analysis and test technology, and the set-up of basic test facilities for the spacer grid. The main research areas and results are as follows. 1. 18 different spacer grid candidates have been invented and applied for domestic and US patents. Among the candidates 16 are chosen from the patent. 2. Two kinds of spacer grids are finally selected for the advanced LWR fuel after detailed performance tests on the candidates and commercial spacer grids from a mechanical/structural point of view. According to the test results the features of the selected spacer grids are better than those of the commercial spacer grids. 3. Four kinds of basic test facilities are set up and the relevant test technologies are established. 4. Mechanical/structural analysis models and technology for spacer grid performance are developed and the analysis results are compared with the test results to enhance the reliability of the models

  14. Analysis of intergenic spacer transcripts suggests ‘read-around’ transcription of the extrachromosomal circular rDNA in Euglena gracilis

    Science.gov (United States)

    Greenwood, Spencer J.; Schnare, Murray N.; Cook, James R.; Gray, Michael W.

    2001-01-01

    We report here the sequence of the 1743 bp intergenic spacer (IGS) that separates the 3′-end of the large subunit ribosomal RNA (rRNA) gene from the 5′-end of the small subunit (SSU) rRNA gene in the circular, extrachromosomal ribosomal DNA (rDNA) of Euglena gracilis. The IGS contains a 277 nt stretch of sequence that is related to a sequence found in ITS 1, an internal transcribed spacer between the SSU and 5.8S rRNA genes. Primer extension analysis of IGS transcripts identified three abundant reverse transcriptase stops that may be analogous to the transcription initiation site (TIS) and two processing sites (A′ and A0) that are found in this region in other eukaryotes. Features that could influence processing at these sites include an imperfect palindrome near site A0 and a sequence near site A′ that could potentially base pair with U3 small nucleolar RNA. Our identification of the TIS (verified by mung bean nuclease analysis) is considered tentative because we also detected low-abundance transcripts upstream of this site throughout the entire IGS. This result suggests the possibility of ‘read-around’ transcription, i.e. transcription that proceeds multiple times around the rDNA circle without termination. PMID:11353089

  15. Spacer for supporting fuel element boxes

    International Nuclear Information System (INIS)

    Wild, E.

    1979-01-01

    A spacer plate unit arranged externally on each side and at a predetermined level of a polygonal fuel element box for mutually supporting, with respect to one another, a plurality of the fuel element boxes forming a fuel element bundle, is formed of a first and a second spacer plate part each having the same length and the same width and being constituted of unlike first and second materials, respectively. The first and second spacer plate parts of the several spacer plate units situated at the predetermined level are arranged in an alternating continuous series when viewed in the peripheral direction of the fuel element box, so that any two spacer plate units belonging to face-to-face oriented sides of two adjoining fuel element boxes in the fuel element bundle define interfaces of unlike materials

  16. 5. international workshop on the identification of transcribed sequences

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    This workshop was held November 5--8, 1995 in Les Embiez, France. The purpose of this conference was to provide a multidisciplinary forum for exchange of state-of-the-art information on mapping the human genome. Attention is focused on the following topics: transcriptional maps; functional analysis; techniques; model organisms; and tissue specific libraries and genes. Abstracts are included of the papers that were presented.

  17. Application of spacer fabrics in composite production

    OpenAIRE

    Mecit, Diren; , Arzu Marmaralı

    2012-01-01

    Developments in the field of textile reinforced composites have been increasing in the last several years. In the first developed composite materials, fibers were used as reinforcement element. Textile materials such as staple fibers, bands, filament yarns, cables and two dimensional textiles are widely used as reinforcement elements in composite materials. Spacer fabrics consist of two outer surfaces and a connection layer between those outer surfaces. Spacer fabrics can be classified in the...

  18. Application of spacer fabrics in composite production

    OpenAIRE

    Mecit, Diren; -, Arzu Marmaralı

    2014-01-01

    Developments in the field of textile reinforced composites have been increasing in the last several years. In the first developed composite materials, fibers were used as reinforcement element. Textile materials such as staple fibers, bands, filament yarns, cables and two dimensional textiles are widely used as reinforcement elements in composite materials. Spacer fabrics consist of two outer surfaces and a connection layer between those outer surfaces. Spacer fabrics can be classified in the...

  19. Membrane-spacer assembly for flow-electrode capacitive deionization

    Science.gov (United States)

    Lee, Ki Sook; Cho, Younghyun; Choo, Ko Yeon; Yang, SeungCheol; Han, Moon Hee; Kim, Dong Kook

    2018-03-01

    Flow-electrode capacitive deionization (FCDI) is a desalination process designed to overcome the limited desalination capacity of conventional CDI systems due to their fixed electrodes. Such a FCDI cell system is comprised of a current collector, freestanding ion-exchange membrane (IEM), gasket, and spacer for flowing saline water. To simplify the cell system, in this study we combined the membrane and spacer into a single unit, by coating the IEM on a porous ceramic structure that acts as the spacer. The combination of membrane with the porous structure avoids the use of costly freestanding IEM. Furthermore, the FCDI system can be readily scaled up by simply inserting the IEM-coated porous structures in between the channels for flow electrodes. However, coating the IEM on such porous ceramic structures can cause a sudden drop in the treatment capacity, if the coated IEM penetrates the ceramic pores and prevents these pores from acting as saline flow channels. To address this issue, we blocked the larger microscale pores on the outer surface with SiO2 and polymeric multilayers. Thus, the IEM is coated only onto the top surface of the porous structure, while the internal pores remain empty to function as water channels.

  20. An examination of the influence of spacers on burnout in an annulus cooled by the upflow of Freon-12

    International Nuclear Information System (INIS)

    Ilic, V.

    1975-04-01

    To evaluate the spacer influence on burnout, tests were carried out in Freon-12 at 1.04 MPa (abs.) test section inlet pressure with an internally heated annulus 2743 mm long by 14.4 mm heater diameter, the outer tube (shroud) having a bore of 22.1 mm. The inner rod (heater) was located centrally to the shroud by spacers and their configuration was changed for each test. Comparison of the results with those obtained with a test section having no spacers indicated that spacers can increase burnout power up to 75 per cent, decrease it, or show no effect at all, depending on the combination of the inlet temperature and mass velocity. If the spacers were streamlined, removed from the upstream portion of the heater or relocated farther upstream from the downstream end of the heater, there was a considerably reduced effect on the test section performance. (author)

  1. Sequences in the intergenic spacer influence RNA Pol I transcription from the human rRNA promoter

    Energy Technology Data Exchange (ETDEWEB)

    Li, W.M.; Sylvester, J.E. [Hahnemann Univ., Philadelphia, PA (United States)

    1994-09-01

    In most eucaryotic species, ribosomal genes are tandemly repeated about 100-5000 times per haploid genome. The 43 Kb human rDNA repeat consists of a 13 Kb coding region for the 18S, 5.8S, 28S ribosomal RNAs (rRNAs) and transcribed spacers separated by a 30 Kb intergenic spacer. For species such as frog, mouse and rat, sequences in the intergenic spacer other than the gene promoter have been shown to modulate transcription of the ribosomal gene. These sequences are spacer promoters, enhancers and the terminator for spacer transcription. We are addressing whether the human ribosomal gene promoter is similarly influenced. In-vitro transcription run-off assays have revealed that the 4.5 kb region (CBE), directly upstream of the gene promoter, has cis-stimulation and trans-competition properties. This suggests that the CBE fragment contains an enhancer(s) for ribosomal gene transcription. Further experiments have shown that a fragment ({approximately}1.6 kb) within the CBE fragment also has trans-competition function. Deletion subclones of this region are being tested to delineate the exact sequences responsible for these modulating activities. Previous sequence analysis and functional studies have revealed that CBE contains regions of DNA capable of adopting alternative structures such as bent DNA, Z-DNA, and triple-stranded DNA. Whether these structures are required for modulating transcription remains to be determined as does the specific DNA-protein interaction involved.

  2. High corrosion-resistant fuel spacers

    International Nuclear Information System (INIS)

    Yoshida, Toshimi; Takase, Iwao; Ikeda, Shinzo; Masaoka, Isao; Nakajima, Junjiro.

    1986-01-01

    Purpose: To enable manufacturing BWR fuel spacers by prior-art production process, using a zirconium-base alloy having very excellent corrosion resistance. Method: A highly improved nodular-resistant, corrosion-resistant zirconium alloy is devised by adding a slight amount of niobium, titanium and vanadium to zircaloy, of which fuel spacers are produced. That is, there can be obtained an alloy having much more excellent nodular resistance than conventional zircaloy, and free from a large change in plasticity, workability, and weldability, by adding to zirconium about 1.5 % of tin, about 0.15 % of iron, about 0.05 % of chromium, about 0.05 % of nickel, and 0.05 to 0.5 % of at least one or two kinds of niobium, titanium and vanadium. Using this zirconium-base alloy can manufacture fuel spacers by the same manufacturing process, thus improving economy and reliability. (Kamimura, M.)

  3. A revised nomenclature for transcribed human endogenous retroviral loci

    Science.gov (United States)

    2011-01-01

    Background Endogenous retroviruses (ERVs) and ERV-like sequences comprise 8% of the human genome. A hitherto unknown proportion of ERV loci are transcribed and thus contribute to the human transcriptome. A small proportion of these loci encode functional proteins. As the role of ERVs in normal and diseased biological processes is not yet established, transcribed ERV loci are of particular interest. As more transcribed ERV loci are likely to be identified in the near future, the development of a systematic nomenclature is important to ensure that all information on each locus can be easily retrieved. Results Here we present a revised nomenclature of transcribed human endogenous retroviral loci that sorts loci into groups based on Repbase classifications. Each symbol is of the format ERV + group symbol + unique number. Group symbols are based on a mixture of Repbase designations and well-supported symbols used in the literature. The presented guidelines will allow newly identified loci to be easily incorporated into the scheme. Conclusions The naming system will be employed by the HUGO Gene Nomenclature Committee for naming transcribed human ERV loci. We hope that the system will contribute to clarifying a certain aspect of a sometimes confusing nomenclature for human endogenous retroviruses. The presented system may also be employed for naming transcribed loci of human non-ERV repeat loci. PMID:21542922

  4. Fouling Resilient Perforated Feed Spacers for Membrane Filtration

    KAUST Repository

    Kerdi, Sarah

    2018-04-24

    The improvement of feed spacers with optimal geometry remains a key challenge for spiral-wound membrane systems in water treatment due to their impact on the hydrodynamic performance and fouling development. In this work, novel spacer designs are proposed by intrinsically modifying cylindrical filaments through perforations. Three symmetric perforated spacers (1-Hole, 2-Hole, and 3-Hole) were in-house 3D-printed and experimentally evaluated in terms of permeate flux, feed channel pressure drop and membrane fouling. Spacer performance is characterized and compared with standard no perforated (0-Hole) design under constant feed pressure and constant feed flow rate. Perforations in the spacer filaments resulted in significantly lowering the net pressure drop across the spacer filled channel. The 3-Hole spacer was found to have the lowest pressure drop (50% - 61%) compared to 0-Hole spacer for various average flow velocities. Regarding permeate flux production, the 0-Hole spacer produced 5.7 L.m-2.h-1 and 6.6 L.m-2.h-1 steady state flux for constant pressure and constant feed flow rate, respectively. The 1-Hole spacer was found to be the most efficient among the perforated spacers with 75% and 23% increase in permeate production at constant pressure and constant feed flow, respectively. Furthermore, membrane surface of 1-Hole spacer was found to be cleanest in terms of fouling, contributing to maintain higher permeate flux production. Hydrodynamic understanding of these perforated spacers is also quantified by performing Direct Numerical Simulation (DNS). The performance enhancement of these perforated spacers is attributed to the formation of micro-jets in the spacer cell that aided in producing enough unsteadiness/turbulence to clean the membrane surface and mitigate fouling phenomena. In the case of 1-Hole spacer, the unsteadiness intensity at the outlet of micro-jets and the shear stress fluctuations created inside the cells are higher than those observed with

  5. Report on reflood experiment of grid spacer effect

    International Nuclear Information System (INIS)

    Sugimoto, Jun; Murao, Yoshio

    1984-07-01

    Experiments were performed in order to clarify the effect of grid spacers on reflood heat transfer in PWR-LOCA. The flow pattern, the thermal responses and the water accumulation near the grid spacer were investigated by shifting the grid spacer at the midplane of the simulated core. Also tested is the effect of the thickness of the grid spacer wall on the reflood behavior. The heat transfer coefficient before the quenching was about 20 to 50 percent higher just above the grid spacer than just below the grid spacer. The decrease of the droplet diameter due to the grid spacer was observed in the droplet dispersed flow regime. In the slug flow regime, the grid spacer was rewetted early in the reflood transient and the increased water accumulation near the grid spacer was observed. Hence, the heat transfer enhancement due to the grid spacer is mainly attributed to the increased interfacial surface area of droplets in the dispersed flow and also to the increased film boiling heat transfer in the slug flow. The heat transfer enhancement tended to be larger with the larger thickness of the grid spacer. The simple model was developed for both the dispersed flow and slug flow regimes based on the present experimental results. The thermohydraulic behavior near the grid spacer was well calculated with the developed model. The further detailed information, however, is required for the improvement and the verification of the grid spacer model. (author)

  6. Nuclear reactor fuel assembly spacer grids

    International Nuclear Information System (INIS)

    Jabsen, F.S.

    1977-01-01

    Designs of nuclear reactor fuel assembly spacer grids for supporting and spacing fuel elements are described which do not utilize resilient grid plate protrusions in the peripheral band but retain the advantages inherent in the combination resilient and rigid protrusion cells. (U.K.)

  7. Pressure Drop Test of Hybrid Mixing Vane Spacer Grid

    Energy Technology Data Exchange (ETDEWEB)

    Oh, D. S.; Chang, S. K.; Kim, B. D.; Chun, S. Y.; Chun, T. H

    2007-08-15

    The pressure loss test has been accomplished in the test section containing 5x5 rod bundle with a length of 2 m including 3 spacer grids. The test has been performed for the 5 kinds of spacer grids to compare the pressure loss characteristics: 1. Plain spacer grid which has the same body of the Hybrid but without vane (Plain), 2. Hybrid Vane spacer grid (Hybrid), 3. Hybrid-SC spacer grid which is constructed with coined, chamfered strip and is fabricated by spot welding, 4. Hybrid-LC spacer grid which is constructed with coined, chamfered strip and is fabricated by line welding along intersection line, 5. Westinghouse spacer grid with split vane (Plus-7). The pressure loss coefficient of the Plain, Hybrid, Hybrid-SC, Hybrid-LC, and Plus-7 spacer grid is 0.93, 1.15, 1.02, 1.04, and 1.08, respectively.

  8. Hydraulic Design Criteria for Spacer Grids of Nuclear Fuel Element

    International Nuclear Information System (INIS)

    Juanico, Luis; Brasnarof, Daniel

    2000-01-01

    In this paper a hydraulic model for calculating the pressure drop on the CARA spacer grids is extended.This model is validated and feedback from experimental hydraulic test performed in a low pressure loop.The importance of the spacer grid geometric parameter (that is, its thickness and length, the number and kind of their fix spacer), developing hydraulic design criteria for spacer grid on fuel element

  9. A non-electrostatic spacer for aerosol delivery

    DEFF Research Database (Denmark)

    Bisgaard, H; Anhøj, J; Klug, B

    1995-01-01

    A pear shaped non-electrostatic spacer, composed of steel with a volume of 250 ml and equipped with a facemask containing integrated inlet and outlet valves for inspiration and expiration, was compared with three plastic spacers. The plastic spacers were primed with repeated puffs from a budesonide...

  10. Molecular systematics of the genera Laurencia, Osmundea and Palisada (Rhodophyta from the Canary Islands - Analysis of rDNA and RUBISCO spacer sequences

    Directory of Open Access Journals (Sweden)

    Lewis, Sh.

    2008-06-01

    Full Text Available The molecular systematics of Laurencia, Osmundea and Palisada (Rhodomelaceae, Ceramiales species from the Canary Islands has been determined by analysis sequences of the ribulose,1-5, bisphosphate carboxylase (RUBISCO spacer from the plastid genome and the internal transcribed spacers (ITS1 and ITS2 and the rDNA 5.8S coding region from the nuclear genome. Comparison of sequence data showed an identity of 72-83 % between the species. Three taxonomic group were identified that correspond to established phylogenetic taxons. Phylogenetic trees using both parsimony and maximum-likelihood methods were derived from the sequence data; the trees indicate that O. pinnatifida appears to be the most distantly related species from the Laurencia and Palisada species. The exact phylogenetic position of Laurencia sp. A (“amarillaâ€� need additional studies.Se aportan datos filogenéticos de algunas especies de Laurencia, Osmundea y Palisada (Rhodomelaceae, Ceramiales de las Islas Canarias mediante el análisis de secuencias de la región espaciadora de ribulose,1-5, bisfosfato carboxilasa (RUBISCO del genoma plastídico y las regiones espaciadoras internas (ITS1, ITS2 y de la región codificadora del rDNA en el genoma nuclear. Los tres géneros analizados, Laurencia, Osmundea y Palisada muestran las correspondientes identidades moleculares con una identidad del 72-83% entre ellas. Empleando métodos de parsimonia y máxima similitud, los correspondientes árboles filogenéticos ponen de manifiesto que O. pinnatifida es el taxon más distante entre las especies de Laurencia y Palisada analizadas. La posición exacta del taxon mencionado como Laurencia sp. A “amarillaâ€� precisa de estudio adicional.

  11. Autoclaved metal-on-cement spacer versus static spacer in two-stage revision in periprosthetic knee infection

    Directory of Open Access Journals (Sweden)

    Yu-Pin Chen

    2016-01-01

    Conclusions: The autoclaved metal-on-cement spacer is an effective and simple method for two-stage re-implantation of a periprosthetic knee infection. Through this spacer, the good interim ROM can be achieved without the additional cost of prefabricated molds or new polyethylene tibial inserts. In addition, ROM after re-implantation is better than that with static spacers.

  12. Heterogeneous diversity of spacers within CRISPR

    Science.gov (United States)

    Deem, Michael; He, Jiankui

    2011-03-01

    Clustered regularly interspaced short palindromic repeats (CRISPR) in bacterial and archaeal DNA have recently been shown to be a new type of anti-viral immune system in these organisms. We here study the diversity of spacers in CRISPR under selective pressure. We propose a population dynamics model that explains the biological observation that the leader-proximal end of CRISPR is more diversified and the leader-distal end of CRISPR is more conserved. This result is shown to be in agreement with recent experiments. Our results show that the CRISPR spacer structure is influenced by and provides a record of the viral challenges that bacteria face. 1) J. He and M. W. Deem, Phys. Rev. Lett. 105 (2010) 128102

  13. Honeycomb spacer crush stength test results

    Energy Technology Data Exchange (ETDEWEB)

    Leader, D.R.

    1993-09-15

    This report discusses aluminum honeycomb spacers, which are used as an energy absorbent material in shipping packages for off site shipment of radioactive materials and which were ordered in two crush strengths, 1,000 psi and 2,000 psi for use in drop tests requested by the Packaging and Transportation group as part of the shipping container rectification process. Both the group as part of the shipping container rectification process. Both the vendor and the SRTC Materials Laboratory performed crush strength measurements on test samples made from the material used to fabricate the actual spacers. The measurements of crush strength made in the SRTC Materials Laboratory are within 100 psi of the measurements made by the manufacturer for all samples tested and all test measurements are within 10% of the specified crush strength, which is acceptable to the P&T group for the planned tests.

  14. Antibiotic impregnated total femur spacers: a technical tip

    Directory of Open Access Journals (Sweden)

    Colin D. Canham, MD

    2018-03-01

    Full Text Available Simultaneous prosthetic joint infection of ipsilateral hip and knee arthroplasties is often accompanied by significant bone loss and presents a challenging reconstructive problem. Two-stage reconstruction is favored and requires the placement of a total femur spacer, which is not a commercially available device. We describe a surgical technique, reporting on 2 cases in which a customized total femur antibiotic impregnated spacer was created by combining an articulating knee spacer and an articulating hip spacer with a reinforced cement dowel construct connecting the 2 spacers. Custom total femoral spacers are useful in the management of infected femoral megaprostheses and cases with ipsilateral injected hip and knee arthroplasties and severe femoral bone loss. Keywords: total femur spacer, revision arthroplasty, total hip arthroplasty, total knee arthroplasty, prosthetic joint infection

  15. A Direct TeX-to-Braille Transcribing Method

    Science.gov (United States)

    Papasalouros, Andreas; Tsolomitis, Antonis

    2017-01-01

    The TeX/LaTeX typesetting system is the most wide-spread system for creating documents in Mathematics and Science. However, no reliable tool exists to this day for automatically transcribing documents from the above formats into Braille/Nemeth code. Thus, visually impaired students of related fields do not have access to the bulk of study material…

  16. Generic assessment of tight-fitting annulus spacer mobility

    International Nuclear Information System (INIS)

    Robertson, J.; Micuda, L.; Van Den Brekel, N.

    2006-01-01

    This paper provides a generic assessment of the mobility of tight-fitting fuel channel annulus spacers in OPG and Bruce Power nuclear units. This assessment is applicable to all tight-fitting annulus spacers, including those used in the original fuel channel installation (Darlington Units 1-4, retubed Pickering Units 1-4, and Bruce Unit 8) and as a result of single fuel channel replacements (SFCR) (Pickering Units 5-8, Bruce Units 3-7). Tight-fitting annulus spacers were designed not to move. Pressure tube to calandria tube contact analyses, and the associated blister susceptibility assessments, have assumed that these tight-fitting spacers remain at the pre-service installed locations. Given the importance of this assumption, the technical basis for the expectation that tight-fitting annulus spacers do not move significantly from their pre-service locations, relative to the pressure tube, was reviewed in detail. The review also assessed the inspection data, comparing spacer locations from in-service and pre-service inspections. The review has concluded that tight-fitting spacers do not move sufficiently to necessitate a postulated spacer movement in fuel channel contact analyses. The paper describes the background of this issue, briefly reviews the experimental programs used to qualify the positional stability of the tight-fitting spacer design, and evaluates the current database of in-service spacer location inspection information to demonstrate that no significant movement relative to the pressure tube has been observed. (author)

  17. Preclinical evaluation of bioabsorbable polyglycolic acid spacer for particle therapy.

    Science.gov (United States)

    Akasaka, Hiroaki; Sasaki, Ryohei; Miyawaki, Daisuke; Mukumoto, Naritoshi; Sulaiman, Nor Shazrina Binti; Nagata, Masaaki; Yamada, Shigeru; Murakami, Masao; Demizu, Yusuke; Fukumoto, Takumi

    2014-12-01

    To evaluate the efficacy and safety of a polyglycolic acid (PGA) spacer through physical and animal experiments. The spacer was produced with surgical suture material made of PGA, forming a 3-dimensional nonwoven fabric. For evaluation or physical experiments, 150-MeV proton or 320-MeV carbon-ion beams were used to generate 60-mm width of spread-out Bragg peak. For animal experiments, the abdomens of C57BL/6 mice, with or without the inserted PGA spacers, were irradiated with 20 Gy of carbon-ion beam (290 MeV) using the spread-out Bragg peak. Body weight changes over time were scored, and radiation damage to the intestine was investigated using hematoxylin and eosin stain. Blood samples were also evaluated 24 days after the irradiation. Long-term thickness retention and safety were evaluated using crab-eating macaques. No chemical or structural changes after 100 Gy of proton or carbon-ion irradiation were observed in the PGA spacer. Water equivalency of the PGA spacer was equal to the water thickness under wet condition. During 24 days' observation after 20 Gy of carbon-ion irradiation, the body weights of mice with the PGA spacer were relatively unchanged, whereas significant weight loss was observed in those mice without the PGA spacer (P<.05). In mice with the PGA spacer, villus and crypt structure were preserved after irradiation. No inflammatory reactions or liver or renal dysfunctions due to placement of the PGA spacer were observed. In the abdomen of crab-eating macaques, thickness of the PGA spacer was maintained 8 weeks after placement. The absorbable PGA spacer had water-equivalent, bio-compatible, and thickness-retaining properties. Although further evaluation is warranted in a clinical setting, the PGA spacer may be effective to stop proton or carbon-ion beams and to separate normal tissues from the radiation field. Copyright © 2014 Elsevier Inc. All rights reserved.

  18. A non-electrostatic spacer for aerosol delivery

    DEFF Research Database (Denmark)

    Bisgaard, H; Anhøj, J; Klug, B

    1995-01-01

    pressurised metered dose inhaler (p-MDI) to minimise the electrostatic charge on the plastic. The procedure prolonged the half life (t1/2) of the aerosol in the Nebuhaler from nine to 32 seconds. A normal cleaning procedure reduced the aerosol t1/2 back to baseline. The t1/2 of the aerosol in the metal spacer...... younger than 4 years. The improved dose delivery from the small volume non-electrostatic spacer is probably related to the non-electrostatic spacer material and the valves which assured unidirectional airflow from the spacer without adding any dead space in the inspiratory channel. The non-electro-static...

  19. Development of structural technology for a high performance spacer grid

    International Nuclear Information System (INIS)

    Song, Kee Nam; Kim, H. K.; Kang, H. S.

    2003-03-01

    A spacer grid in a LWR fuel assembly is a key structural component to support fuel rods and to enhance the heat transfer from the fuel rod to the coolant. In this research, the main research items are the development of inherent and high performance spacer grid shapes, the establishment of mechanical/structural analysis and test technology, and the set-up of basic test facilities for the spacer grid. The main research areas and results are as follows. 1. 14 different spacer grid candidates have been invented and applied for domestic and US patents. Among the candidates six are chosen from the patent. 2. Two kinds of spacer grids are finally selected for the advanced LWR fuel after detailed performance tests on the candidates and commercial spacer grids from a mechanical/structural point of view. According to the test results the features of the selected spacer grids are better than those of the commercial spacer grids. 3. Four kinds of basic test facilities are set up and the relevant test technologies are established. 4. Mechanical/structural analysis models and technology for spacer grid performance are developed and the analysis results are compared with the test results to enhance the reliability of the models

  20. Multi-Scaled Modeling the Mechanical Properties of Tubular Composites Reinforced with Innovated 3D Weft Knitted Spacer Fabrics

    Science.gov (United States)

    Omrani, Elahe; Hasani, Hossein; Dibajian, Sayed Houssain

    2018-02-01

    Textile composites of 3D integrated spacer configurations have been recently focused by several researchers all over the world. In the present study, newly-designed tubular composites reinforced with 3D spacer weft knitted fabrics were considered and the effects of their structural parameters on some applicable mechanical properties were investigated. For this purpose, two different samples of 3D spacer weft knitted textile types in tubular form were produced on an electronic flat knitting machine, using glass/nylon hybrid yarns. Thermoset tubular-shaped composite parts were manufactured via vacuum infusion molding process using epoxy resin. The mechanical properties of the produced knitted composites in term of external static and internal hydrostatic pressures were evaluated. Resistance of the produced composites against the external static and internal hydrostatic pressures was numerically simulated using multi-scale modeling method. The finding revealed that there is acceptable correlation between experimental and theoretical results.

  1. Nuclear reactor spring strip grid spacer

    International Nuclear Information System (INIS)

    Patterson, J.F.; Flora, B.S.

    1980-01-01

    An improved and novel grid spacer was developed for use in nuclear reactor fuel assemblies. It is comprised of a series of intersecting support strips and a peripheral support band attached to the ends of the support strips. Each of the openings into which the fuel element is inserted has a number of protruding dimples and springs extending in different directions. The dimples coact with the springs to secure the fuel rods in the openings. Compared with previous designs, this design gives more positive alignment of the support stips while allowing greater flexibility to counterbalance the effects of thermal expansion. The springs are arranged in alternating directions so that the reaction forces tend to counterbalance each other, which in turn minimizes the reaction loads on the supporting structure. (D.N.)

  2. Salvage of Infected Nasal Reconstruction with a Polymethyl Methacrylate Spacer.

    Science.gov (United States)

    Cavadas, Pedro C; Thione, Alessandro; Pacheco, Yvan D

    2017-07-01

    Total nasal reconstruction is a challenging multistage procedure. Infections can destroy the cartilage framework and seriously compromise the result. The use of polymethyl methacrylate with antibiotics as a spacer has been described in the treatment of skeletal infections. Using this same principle, the use of a polymethyl methacrylate with antibiotics spacer for an infected nasal reconstruction is reported in a clinical case.

  3. ATLAS barrel hadron tile calorimeter: spacers plates mass production

    International Nuclear Information System (INIS)

    Artikov, A.M.; Budagov, Yu.A.; Khubua, J.

    1999-01-01

    In this article we expose the main problems of the mass production of the so-called 'spacer plates' for the ATLAS Barrel Hadron Tile Calorimeter. We describe all practical solutions of these problems. Particularly we present the measurement procedures and calculation schemes we used for the spacers dimensions determination. The results of the calculations are presented

  4. CFD application to advanced design for high efficiency spacer grid

    International Nuclear Information System (INIS)

    Ikeda, Kazuo

    2014-01-01

    Highlights: • A new LDV was developed to investigate the local velocity in a rod bundle and inside a spacer grid. • The design information that utilizes for high efficiency spacer grid has been obtained. • CFD methodology that predicts flow field in a PWR fuel has been developed. • The high efficiency spacer grid was designed using the CFD methodology. - Abstract: Pressurized water reactor (PWR) fuels have been developed to meet the needs of the market. A spacer grid is a key component to improve thermal hydraulic performance of a PWR fuel assembly. Mixing structures (vanes) of a spacer grid promote coolant mixing and enhance heat removal from fuel rods. A larger mixing vane would improve mixing effect, which would increase the departure from nucleate boiling (DNB) benefit for fuel. However, the increased pressure loss at large mixing vanes would reduce the coolant flow at the mixed fuel core, which would reduce the DNB margin. The solution is to develop a spacer grid whose pressure loss is equal to or less than the current spacer grid and that has higher critical heat flux (CHF) performance. For this reason, a requirement of design tool for predicting the pressure loss and CHF performance of spacer grids has been increased. The author and co-workers have been worked for development of high efficiency spacer grid using Computational Fluid Dynamics (CFD) for nearly 20 years. A new laser Doppler velocimetry (LDV), which is miniaturized with fiber optics embedded in a fuel cladding, was developed to investigate the local velocity profile in a rod bundle and inside a spacer grid. The rod-embedded fiber LDV (rod LDV) can be inserted in an arbitrary grid cell instead of a fuel rod, and has the advantage of not disturbing the flow field since it is the same shape as a fuel rod. The probe volume of the rod LDV is small enough to measure spatial velocity profile in a rod gap and inside a spacer grid. According to benchmark experiments such as flow velocity

  5. Preclinical Evaluation of Bioabsorbable Polyglycolic Acid Spacer for Particle Therapy

    Energy Technology Data Exchange (ETDEWEB)

    Akasaka, Hiroaki [Division of Radiation Oncology, Kobe University Graduate School of Medicine, Hyogo Japan (Japan); Sasaki, Ryohei, E-mail: rsasaki@med.kobe-u.ac.jp [Division of Radiation Oncology, Kobe University Graduate School of Medicine, Hyogo Japan (Japan); Miyawaki, Daisuke; Mukumoto, Naritoshi; Sulaiman, Nor Shazrina Binti [Division of Radiation Oncology, Kobe University Graduate School of Medicine, Hyogo Japan (Japan); Nagata, Masaaki [Division of Gastroenterology, Kobe University Graduate School of Medicine, Hyogo Japan (Japan); Yamada, Shigeru [Research Center Hospital, Research Center for Charged Particle Therapy, National Institute of Radiological Sciences, Chiba (Japan); Murakami, Masao [Radiation Oncology Center, Dokkyo Medical University, Tochigi (Japan); Demizu, Yusuke [Department of Radiology, Hyogo Ion Beam Medical Center, Hyogo (Japan); Fukumoto, Takumi [Division of Hepato-Biliary-Pancreatic Surgery, Kobe University Graduate School of Medicine, Hyogo Japan (Japan)

    2014-12-01

    Purpose: To evaluate the efficacy and safety of a polyglycolic acid (PGA) spacer through physical and animal experiments. Methods and Materials: The spacer was produced with surgical suture material made of PGA, forming a 3-dimensional nonwoven fabric. For evaluation or physical experiments, 150-MeV proton or 320-MeV carbon-ion beams were used to generate 60-mm width of spread-out Bragg peak. For animal experiments, the abdomens of C57BL/6 mice, with or without the inserted PGA spacers, were irradiated with 20 Gy of carbon-ion beam (290 MeV) using the spread-out Bragg peak. Body weight changes over time were scored, and radiation damage to the intestine was investigated using hematoxylin and eosin stain. Blood samples were also evaluated 24 days after the irradiation. Long-term thickness retention and safety were evaluated using crab-eating macaques. Results: No chemical or structural changes after 100 Gy of proton or carbon-ion irradiation were observed in the PGA spacer. Water equivalency of the PGA spacer was equal to the water thickness under wet condition. During 24 days' observation after 20 Gy of carbon-ion irradiation, the body weights of mice with the PGA spacer were relatively unchanged, whereas significant weight loss was observed in those mice without the PGA spacer (P<.05). In mice with the PGA spacer, villus and crypt structure were preserved after irradiation. No inflammatory reactions or liver or renal dysfunctions due to placement of the PGA spacer were observed. In the abdomen of crab-eating macaques, thickness of the PGA spacer was maintained 8 weeks after placement. Conclusions: The absorbable PGA spacer had water-equivalent, bio-compatible, and thickness-retaining properties. Although further evaluation is warranted in a clinical setting, the PGA spacer may be effective to stop proton or carbon-ion beams and to separate normal tissues from the radiation field.

  6. Grid spacers for use in a nuclear fuel assembly

    International Nuclear Information System (INIS)

    Kuwako, Akira.

    1987-01-01

    Purpose: To obtain spacers capable of reducing the pressure loss by enlarging coolant flow channels when the fuel temperature is high, while capable of reliably maintaining the fuel pins with no vibrations when the fuel temperature is low. Constitution: This invention concerns grid spacers for constituting fuel assemblies for use in water cooled reactors. Memory shape alloys are disposed at least a portion of a spacer element that takes such a shape as urging the pin when the fuel temperature is low, while enlarging the coolant flow channel to reduce the pressure loss when the fuel temperature is high. (Ikeda, J.)

  7. Preclinical Evaluation of Bioabsorbable Polyglycolic Acid Spacer for Particle Therapy

    International Nuclear Information System (INIS)

    Akasaka, Hiroaki; Sasaki, Ryohei; Miyawaki, Daisuke; Mukumoto, Naritoshi; Sulaiman, Nor Shazrina Binti; Nagata, Masaaki; Yamada, Shigeru; Murakami, Masao; Demizu, Yusuke; Fukumoto, Takumi

    2014-01-01

    Purpose: To evaluate the efficacy and safety of a polyglycolic acid (PGA) spacer through physical and animal experiments. Methods and Materials: The spacer was produced with surgical suture material made of PGA, forming a 3-dimensional nonwoven fabric. For evaluation or physical experiments, 150-MeV proton or 320-MeV carbon-ion beams were used to generate 60-mm width of spread-out Bragg peak. For animal experiments, the abdomens of C57BL/6 mice, with or without the inserted PGA spacers, were irradiated with 20 Gy of carbon-ion beam (290 MeV) using the spread-out Bragg peak. Body weight changes over time were scored, and radiation damage to the intestine was investigated using hematoxylin and eosin stain. Blood samples were also evaluated 24 days after the irradiation. Long-term thickness retention and safety were evaluated using crab-eating macaques. Results: No chemical or structural changes after 100 Gy of proton or carbon-ion irradiation were observed in the PGA spacer. Water equivalency of the PGA spacer was equal to the water thickness under wet condition. During 24 days' observation after 20 Gy of carbon-ion irradiation, the body weights of mice with the PGA spacer were relatively unchanged, whereas significant weight loss was observed in those mice without the PGA spacer (P<.05). In mice with the PGA spacer, villus and crypt structure were preserved after irradiation. No inflammatory reactions or liver or renal dysfunctions due to placement of the PGA spacer were observed. In the abdomen of crab-eating macaques, thickness of the PGA spacer was maintained 8 weeks after placement. Conclusions: The absorbable PGA spacer had water-equivalent, bio-compatible, and thickness-retaining properties. Although further evaluation is warranted in a clinical setting, the PGA spacer may be effective to stop proton or carbon-ion beams and to separate normal tissues from the radiation field

  8. Analysis of US patents on spacer grids

    International Nuclear Information System (INIS)

    Kim, Hyung Kyu; Song, Kee Nam; Yoon, Kyung Ho; Kang, Hong Seok; Kim, Hyung Kyu; Jeon, Tae Hyun; Oh, Dong Seok; In, Wang Ki; Bang, Jae Keun; Oh, Seung Eun; Seo, Jeong Min; Lee, Jin Seok; Park, Seong Keun

    1997-06-01

    The total of 137 US patents on spacer grids patented from 1968 through 1993 are analyzed and summarized. Database is constituted with designing the appropriate fields by which each patent can be identified. The fields consist of patent number, inventor, assignee, date of patent, title and major foci of the patent. The major foci are again classified by detailed subjects such as the fretting failure and fuel rod support-related, the strength-related, the fabrication-related as for mechanical subjects, while the cooling performance-related and the pressure drop-related as for thermal-hydraulic one. The 92% of the patents analyzed were issued form nuclear companies of USA, France and Germany. Among the patents dealing with mechanical subjects, the fretting failure and fuel rod support-related is more than the pressure drop-related among the patents of thermal-hydraulic subjects. The number of patents issued from Japan ranks just after Germany i.e., the 4th country. It is thought that much concern as well as investment should be increased in this field, the patent of nuclear components. (author). 2 tabs., 5 figs

  9. Surface plasmon resonance in electrodynamically coupled Au NPs monolayer/dielectric spacer/Al film nanostructure: tuning by variation of spacer thickness

    Science.gov (United States)

    Yeshchenko, Oleg A.; Kozachenko, Viktor V.; Liakhov, Yuriy F.; Tomchuk, Anastasiya V.; Haftel, Michael; Pinchuk, Anatoliy O.

    2017-10-01

    Effects of plasmonic coupling between metal nanoparticles and thin metal films separated by thin dielectric film-spacers have been studied by means of light extinction in three-layer planar Au NPs monolayer/dielectric (shellac) film/Al film nanostructure. The influence of coupling on the spectral characteristics of the Au NPs SPR extinction peak has been analyzed with spacer thickness, varied from 3 to 200 nm. The main observed features are a strong red shift (160 nm), and non-monotonical behavior of the magnitude and width of Au NPs SPR, as the spacer thickness decreased. The appearance of an intensive gap mode peak was observed at a spacer thickness smaller than approximately 30 nm, caused by the hybridization of the Au NPs SPR mode and gap mode in the presence of the Al film. Additionally, the appreciable enhancement (5.6 times) of light extinction by the Au NPs monolayer in the presence of Al film has been observed. A certain value of dielectric spacer thickness (70 nm) exists at which such enhancement is maximal.

  10. Phylogenetic study of six species of Anopheles mosquitoes in Peninsular Malaysia based on inter-transcribed spacer region 2 (ITS2) of ribosomal DNA.

    Science.gov (United States)

    Sum, Jia-Siang; Lee, Wenn-Chyau; Amir, Amirah; Braima, Kamil A; Jeffery, John; Abdul-Aziz, Noraishah M; Fong, Mun-Yik; Lau, Yee-Ling

    2014-07-03

    Molecular techniques are invaluable for investigation on the biodiversity of Anopheles mosquitoes. This study aimed at investigating the spatial-genetic variations among Anopheles mosquitoes from different areas of Peninsular Malaysia, as well as deciphering evolutionary relationships of the local Anopheles mosquitoes with the mosquitoes from neighbouring countries using the anopheline ITS2 rDNA gene. Mosquitoes were collected, identified, dissected to check infection status, and DNA extraction was performed for PCR with primers targeting the ITS2 rDNA region. Sequencing was done and phylogenetic tree was constructed to study the evolutionary relationship among Anopheles mosquitoes within Peninsular Malaysia, as well as across the Asian region. A total of 133 Anopheles mosquitoes consisting of six different species were collected from eight different locations across Peninsular Malaysia. Of these, 65 ITS2 rDNA sequences were obtained. The ITS2 rDNA amplicons of the studied species were of different sizes. One collected species, Anopheles sinensis, shows two distinct pools of population in Peninsular Malaysia, suggesting evolvement of geographic race or allopatric speciation. Anopheles mosquitoes from Peninsular Malaysia show close evolutionary relationship with the Asian anophelines. Nevertheless, genetic differences due to geographical segregation can be seen. Meanwhile, some Anopheles mosquitoes in Peninsular Malaysia show vicariance, exemplified by the emergence of distinct cluster of An. sinensis population.

  11. Phylogenetic study of six species of Anopheles mosquitoes in Peninsular Malaysia based on inter-transcribed spacer region 2 (ITS2) of ribosomal DNA

    OpenAIRE

    Sum, Jia-Siang; Lee, Wenn-Chyau; Amir, Amirah; Braima, Kamil A; Jeffery, John; Abdul-Aziz, Noraishah M; Fong, Mun-Yik; Lau, Yee-Ling

    2014-01-01

    Background Molecular techniques are invaluable for investigation on the biodiversity of Anopheles mosquitoes. This study aimed at investigating the spatial-genetic variations among Anopheles mosquitoes from different areas of Peninsular Malaysia, as well as deciphering evolutionary relationships of the local Anopheles mosquitoes with the mosquitoes from neighbouring countries using the anopheline ITS2 rDNA gene. Methods Mosquitoes were collected, identified, dissected to check infection statu...

  12. Surface-Tethered Iterative Carbohydrate Synthesis (STICS): A spacer study

    Science.gov (United States)

    Ganesh, N. Vijaya; Fujikawa, Kohki; Tan, Yih Horng; Nigudkar, Swati S.

    2013-01-01

    Comparative study of STICS using HPLC-assisted experimental set-up clearly demonstrated benefits of using longer spacer-anchoring systems. The use of mixed self-assembled monolayers helps to provide the required space for glycosylation reaction around the immobilized glycosyl acceptor. Both extension of the spacer length and using mixed self-assembled monolayers help to promote reaction and the beneficial effects may include moving the glycosyl acceptor further out into solution and providing additional conformational flexibility. It is possible that surface-immobilized glycosyl acceptors with a longer spacer (C8-O-C8)-lipoic acid have a higher tendency to mimic a solution-phase reaction environment than that of acceptors with shorter spacers. PMID:23822088

  13. Finite element modeling of stress distribution in intervertebral spacers of different surface geometries.

    Science.gov (United States)

    Lee, Jae Hyup; Baek, Myong-Hyun; Kim, Young Eun; Seo, Jun-Hyuk; Song, Dong Ryul; Ryu, Hyun-Seung; Lee, Choon-Ki; Chang, Bong-Soon

    2013-11-01

    Intervertebral disc spacers using bioactive ceramics have been used to treat degenerative spinal disease. Tooth-shaped spacers are commonly used to prevent migration, but there is a possibility of fracture when inserted or after insertion. Intervertebral disc spacers with either an isosceles triangle-shaped tooth (T1) or a right triangle-shaped tooth (T2) were used as a control group. The design factors for the experimental group were modified to prevent fractures induced by stress concentration, and the surfaces of the spacers were designed as either an isosceles triangle-shaped valley (V1) or a right triangle-shaped valley (V2). Linear analysis using finite element model (FEM) was performed, and Von Mises stress distribution was calculated by applying 1000 N of uniformly distributed load. Samples of the V2 design were made with bioactive glass-ceramics (BGS-7) and evaluated for compressive strength, fatigue degree, and impact strength. Von Mises stress was highest at the first tooth from the posterior side for the control group and at the center for the experimental group. Compared with the control group, the experimental group showed 18.4% and 82.5% reduction (V1 vs. T1 and V2 vs. T2, respectively) in the maximum stress at the bottom of the valleys. The FEM analysis revealed that the V2 design had the most even load distribution. The V2 samples with bioactive glass-ceramics were evaluated for compressive strength, and all six samples were not fractured up to 24 000 N. However, the average impact strength was 19.42 kN, suggesting that momentary force caused damage at a lower load than compression with a steady speed. The BGS-7 intervertebral disc spacer with V2 design was not fractured during the fatigue test at maximum pressure of 8000 N, R ≥10, 5 Hz, and 5 million cycles. These data confirm that the BGS-7 spacer with the V2 design may be clinically applicable. Collectively, the modified surface geometry of the experimental group significantly lowered Von

  14. Salvage of Infected Nasal Reconstruction with a Polymethyl Methacrylate Spacer

    Directory of Open Access Journals (Sweden)

    Pedro C. Cavadas, MD, PhD

    2017-07-01

    Full Text Available Summary:. Total nasal reconstruction is a challenging multistage procedure. Infections can destroy the cartilage framework and seriously compromise the result. The use of polymethyl methacrylate with antibiotics as a spacer has been described in the treatment of skeletal infections. Using this same principle, the use of a polymethyl methacrylate with antibiotics spacer for an infected nasal reconstruction is reported in a clinical case.

  15. Bioinformatics analyses of Shigella CRISPR structure and spacer classification.

    Science.gov (United States)

    Wang, Pengfei; Zhang, Bing; Duan, Guangcai; Wang, Yingfang; Hong, Lijuan; Wang, Linlin; Guo, Xiangjiao; Xi, Yuanlin; Yang, Haiyan

    2016-03-01

    Clustered regularly interspaced short palindromic repeats (CRISPR) are inheritable genetic elements of a variety of archaea and bacteria and indicative of the bacterial ecological adaptation, conferring acquired immunity against invading foreign nucleic acids. Shigella is an important pathogen for anthroponosis. This study aimed to analyze the features of Shigella CRISPR structure and classify the spacers through bioinformatics approach. Among 107 Shigella, 434 CRISPR structure loci were identified with two to seven loci in different strains. CRISPR-Q1, CRISPR-Q4 and CRISPR-Q5 were widely distributed in Shigella strains. Comparison of the first and last repeats of CRISPR1, CRISPR2 and CRISPR3 revealed several base variants and different stem-loop structures. A total of 259 cas genes were found among these 107 Shigella strains. The cas gene deletions were discovered in 88 strains. However, there is one strain that does not contain cas gene. Intact clusters of cas genes were found in 19 strains. From comprehensive analysis of sequence signature and BLAST and CRISPRTarget score, the 708 spacers were classified into three subtypes: Type I, Type II and Type III. Of them, Type I spacer referred to those linked with one gene segment, Type II spacer linked with two or more different gene segments, and Type III spacer undefined. This study examined the diversity of CRISPR/cas system in Shigella strains, demonstrated the main features of CRISPR structure and spacer classification, which provided critical information for elucidation of the mechanisms of spacer formation and exploration of the role the spacers play in the function of the CRISPR/cas system.

  16. Axonal and presynaptic RNAs are locally transcribed in glial cells.

    Science.gov (United States)

    Giuditta, Antonio; Chun, Jong Tai; Eyman, Maria; Cefaliello, Carolina; Bruno, Anna Paola; Crispino, Marianna

    2007-01-01

    In the last few years, the long-standing opinion that axonal and presynaptic proteins are exclusively derived from the neuron cell body has been substantially modified by the demonstration that active systems of protein synthesis are present in axons and nerve terminals. These observations have raised the issue of the cellular origin of the involved RNAs, which has been generally attributed to the neuron soma. However, data gathered in a number of model systems indicated that axonal RNAs are synthesized in the surrounding glial cells. More recent experiments on the perfused squid giant axon have definitively proved that axoplasmic RNAs are transcribed in periaxonal glia. Their delivery to the axon occurs by a modulatory mechanism based on the release of neurotransmitters from the stimulated axon and on their binding to glial receptors. In additional experiments on squid optic lobe synaptosomes, presynaptic RNA has been also shown to be synthesized locally, presumably in nearby glia. Together with a wealth of literature data, these observations indicate that axons and nerve terminals are endowed with a local system of gene expression that supports the maintenance and plasticity of these neuronal domains.

  17. The potential of standard and modified feed spacers for biofouling control

    KAUST Repository

    Araújo, Paula A.

    2012-06-01

    The impact of feed spacers on initial feed channel pressure (FCP) drop, FCP increase and biomass accumulation has been studied in membrane fouling simulators using feed spacers applied in commercially available nanofiltration and reverse osmosis spiral wound membrane modules. All spacers had a similar geometry.Our studies showed that biofouling was not prevented by (i) variation of spacer thickness, (ii) feed spacer orientation, (iii) feed spacer coating with silver, copper or gold and (iv) using a biostatic feed spacer. At constant feed flow, a lower FCP and FCP increase were observed for a thicker feed spacer. At constant linear flow velocity, roughly the same FCP development and biomass accumulation were found irrespective of the feed spacer thickness: hydrodynamics and substrate load were more important for development and impact of biofouling than the thickness of currently applied spacers. Use of biostatic and metal coated spacers were not effective for biofouling control. The same small reduction of biofouling rate was observed with copper and silver coated spacers as well as uncoated 45° rotated spacers.The studied modified spacers were not effective for biofouling prevention and control. The impact of biofouling on FCP increase was reduced significantly by a lower linear flow velocity, while spacer orientation and spacer thickness in membrane modules had a smaller but still significant effect. © 2012 Elsevier B.V.

  18. Isolation and characterization of an unusual repeated sequence from the ribosomal intergenic spacer of the crucifer Sisymbrium irio.

    Science.gov (United States)

    Grellet, F; Delcasso-Tremousaygue, D; Delseny, M

    1989-06-01

    A recombinant plasmid containing a 433 base pair (bp) Bam HI fragment from Sisymbrium irio genomic DNA was isolated and characterized. This fragment was shown to be a ribosomal intergenic spacer (IGS) sequence which is reiterated up to six times in the IGS and extends close to the 5' end of the 18S rRNA gene. The nucleotide sequence of the cloned element is composed of 10-11 40 bp blocks that are probably derived from a common ancestor. The presence of a similar sequence can be detected in the DNA of another Sisymbrium species and in Matthiola incana. Homology was also found with the last 43 nucleotides of the radish IGS 3' end, suggesting that there is possibly a common ancestral nucleotide motif in cruciferous IGS sequences. The cloned element hybridises to RNA transcripts, indicating that the S. irio IGS repetitive sequence is at least partially transcribed during the pre-rRNA transcription process.

  19. Impact of spacer thickness on biofouling in forward osmosis.

    Science.gov (United States)

    Valladares Linares, R; Bucs, Sz S; Li, Z; AbuGhdeeb, M; Amy, G; Vrouwenvelder, J S

    2014-06-15

    Forward osmosis (FO) indirect desalination systems integrate wastewater recovery with seawater desalination. Niche applications for FO systems have been reported recently, due to the demonstrated advantages compared to conventional high-pressure membrane processes such as nanofiltration (NF) and reverse osmosis (RO). Among them, wastewater recovery has been identified to be particularly suitable for practical applications. However, biofouling in FO membranes has rarely been studied in applications involving wastewater effluents. Feed spacers separating the membrane sheets in cross-flow systems play an important role in biofilm formation. The objective of this study was to determine the influence of feed spacer thickness (28, 31 and 46 mil) on biofouling development and membrane performance in a FO system, using identical cross-flow cells in parallel studies. Flux development, biomass accumulation, fouling localization and composition were determined and analyzed. For all spacer thicknesses, operated at the same feed flow and the same run time, the same amount of biomass was found, while the flux reduction decreased with thicker spacers. These observations are in good agreement with biofouling studies for RO systems, considering the key differences between FO and RO. Our findings contradict previous cross-flow studies on particulate/colloidal fouling, where higher cross-flow velocities improved system performance. Thicker spacers reduced the impact of biofouling on FO membrane flux. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. Numerical analysis of the spacer grids' compression strength

    Energy Technology Data Exchange (ETDEWEB)

    Schettino, C.F.M.; Gouvea, J.P.; Medeiros, N., E-mail: carlosschettino@inb.gov.br, E-mail: jpg@metal.eeimvr.uff.br [Universidade Federal Fluminense (UFF), Volta Redonda, RJ (Brazil). Programa de Engenharia Metalurgica

    2013-07-01

    Among the components of the fuel assembly, the spacer grids play an important structural role during the energy generation process, mainly for their requirement to have enough structural strength to withstand lateral impact loads, due to fuel assembly shipping/handling and due to forces outcome from postulated accidents (earthquake and LOCA). This requirement ensures a proper geometry for cooling and for guide thimble straightness in the fuel assembly. In this way, the understanding of the macroscopic mechanical behavior of this component becomes essential even to any subsequent geometrical modifications to optimize the flue assemblies' structural behavior. In the present work, three-dimensional finite element models destined to provide consistent predictions of 16X16-type spacer grids lateral strength were proposed. Firstly, buckling tests based on results available in the literature were performed to establish a methodology for spacer grid finite element-based modeling. The, by considering a spacer grid interesting geometry and some possible variations associated to its fabrication, tolerance, the proposed numerical models were submitted to compression conditions to calculate the buckling force. Also, these models were validated for comparison with experimental buckling load results. Comparison of buckling predictions combined to observations of actual and simulated deformed spacer grids geometries permitted to verify the consistency and applicability of the proposed models. Thus, these numerical results show a good agreement between the and the experimental results. (author)

  1. A non-electrostatic spacer for aerosol delivery

    DEFF Research Database (Denmark)

    Bisgaard, H; Anhøj, J; Klug, B

    1995-01-01

    A pear shaped non-electrostatic spacer, composed of steel with a volume of 250 ml and equipped with a facemask containing integrated inlet and outlet valves for inspiration and expiration, was compared with three plastic spacers. The plastic spacers were primed with repeated puffs from a budesonide...... pressurised metered dose inhaler (p-MDI) to minimise the electrostatic charge on the plastic. The procedure prolonged the half life (t1/2) of the aerosol in the Nebuhaler from nine to 32 seconds. A normal cleaning procedure reduced the aerosol t1/2 back to baseline. The t1/2 of the aerosol in the metal spacer...... was 27 seconds and independent of the use of p-MDI. In vitro the maximum dose of budesonide from a p-MDI, expressed as a percentage of the nominal dose, was 56% from the non-electrostatic spacer, 61% from the Nebuhaler, 45% from the Babyhaler, and 30% from the AeroChamber. In 124 children, age 6 months...

  2. Zircaloy spacer grid for boiling light water reactors

    International Nuclear Information System (INIS)

    Borgiani, F.; Cali', G.P.; Cerretti, P.; Pazzo, P.

    1975-01-01

    The need to increase the neutronic efficiency of the new cores of BWR's, lead to study types of spacer-grids made of low neutronic absorption materials as zircaloy-4. The particular mechanical behaviour of this material suggested to design a spacer-grids such as to utilize only blanking, slotting and bending operations as plastic forming and to avoid therefore drawing effects. The optimization of the bending procedures lead to a final spacer-grids configuration equally stiff in all directions and planes. Only for the ''elastic constraints'' nichel alloy sheets were used to made easy the whole spacer design. The ''rigid constraints'', supporting the rods, have been obtained directly from the spacer structure. Calculations were performed to verify the mechanical strength of the main grid components. In this framework a computer code was developed to find the best elastic characteristic of the ''elastic constraints'' taking into account the machining tolerances. Some original methods to test the integral behaviour of the grid assembled as well as the procedures to be adopted for its best maintenance, are described

  3. Impact of spacer thickness on biofouling in forward osmosis

    KAUST Repository

    Valladares Linares, Rodrigo

    2014-06-01

    Forward osmosis (FO) indirect desalination systems integrate wastewater recovery with seawater desalination. Niche applications for FO systems have been reported recently, due to the demonstrated advantages compared to conventional high-pressure membrane processes such as nanofiltration (NF) and reverse osmosis (RO). Among them, wastewater recovery has been identified to be particularly suitable for practical applications. However, biofouling in FO membranes has rarely been studied in applications involving wastewater effluents. Feed spacers separating the membrane sheets in cross-flow systems play an important role in biofilm formation. The objective of this study was to determine the influence of feed spacer thickness (28, 31 and 46mil) on biofouling development and membrane performance in a FO system, using identical cross-flow cells in parallel studies. Flux development, biomass accumulation, fouling localization and composition were determined and analyzed. For all spacer thicknesses, operated at the same feed flow and the same run time, the same amount of biomass was found, while the flux reduction decreased with thicker spacers. These observations are in good agreement with biofouling studies for RO systems, considering the key differences between FO and RO. Our findings contradict previous cross-flow studies on particulate/colloidal fouling, where higher cross-flow velocities improved system performance. Thicker spacers reduced the impact of biofouling on FO membrane flux. © 2014 Elsevier Ltd.

  4. Analyses of the Collapse Behavior of a Spacer Grid

    International Nuclear Information System (INIS)

    Jang, Myung-Geun; Na, Geum Ju; Jag, Yeon-Hui; Kim, Hee Cheol; Kim, Jong-Bong; Kim, Jaeyoug

    2016-01-01

    In order to investigate the protection capability of a spacer grid assembly for impact load, a hammer impact test has been carried out. The crush strength is measured in the hammer impact test. Song et al. carried out the experiment and finite element analysis for the hammer impact test for various weld line depth. Park et al. designed the spacer grid shape to get required crush strength via finite element analysis. Song et al. also optimized the spacer grid shape to maximize the crush strength, and carried out the finite element analysis for the hammer impact test considering the weld properties. Kim et al. carried out finite element analysis for various guide tube hole shape and compared the crush shape and crush strength. In this study, the effect of shape defect on the crush behavior in the hammer impact test is investigated. The spacer grid cannot be exactly the square. Therefore a lateral displacement (imperfection) is imposed to square spacer grid and then hammer impact is carried out. The effect of the lateral imperfection on the crush strength is investigated. The effect of the shape defect on the crushing behavior in the hammer impact test is investigated by finite element analysis. It is shown that the collapse become severe as the lateral imperfection displacement increases, especially when the imperfection is greater than or equal to 0.7 mm

  5. CRISPR interference and priming varies with individual spacer sequences.

    Science.gov (United States)

    Xue, Chaoyou; Seetharam, Arun S; Musharova, Olga; Severinov, Konstantin; Brouns, Stan J J; Severin, Andrew J; Sashital, Dipali G

    2015-12-15

    CRISPR-Cas (clustered regularly interspaced short palindromic repeats-CRISPR associated) systems allow bacteria to adapt to infection by acquiring 'spacer' sequences from invader DNA into genomic CRISPR loci. Cas proteins use RNAs derived from these loci to target cognate sequences for destruction through CRISPR interference. Mutations in the protospacer adjacent motif (PAM) and seed regions block interference but promote rapid 'primed' adaptation. Here, we use multiple spacer sequences to reexamine the PAM and seed sequence requirements for interference and priming in the Escherichia coli Type I-E CRISPR-Cas system. Surprisingly, CRISPR interference is far more tolerant of mutations in the seed and the PAM than previously reported, and this mutational tolerance, as well as priming activity, is highly dependent on spacer sequence. We identify a large number of functional PAMs that can promote interference, priming or both activities, depending on the associated spacer sequence. Functional PAMs are preferentially acquired during unprimed 'naïve' adaptation, leading to a rapid priming response following infection. Our results provide numerous insights into the importance of both spacer and target sequences for interference and priming, and reveal that priming is a major pathway for adaptation during initial infection. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

  6. PEG spacers of different length influence the biological profile of bombesin-based radiolabeled antagonists

    International Nuclear Information System (INIS)

    Jamous, Mazen; Tamma, Maria L.; Gourni, Eleni; Waser, Beatrice; Reubi, Jean C.; Maecke, Helmut R.; Mansi, Rosalba

    2014-01-01

    Introduction: The gastrin-releasing peptide receptor (GRPR) was shown to be expressed with high density on several types of cancers. Radiolabeled peptides for imaging and targeted radionuclide therapy have been developed. In this study, we evaluated the potential of statine-based bombesin antagonists, conjugated to 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA) through oligoethyleneglycol spacers, labeled with 177 Lu and we determined the effect of polyethyleneglycol (PEG) spacer length on in vitro and in vivo properties. Methods: The bombesin antagonists were synthesized on solid phase using Fmoc chemistry; the spacers Fmoc-dPEG x -OH (x = 2, 4, 6 and 12) and the DOTA(tBu) 3 were coupled using a standard procedure. The peptides were labeled with 177 Lu and evaluated in vitro (lipophilicity, serum stability, internalization and binding affinity assays). Biodistribution studies were performed in PC-3 tumor-bearing nude mice. Results: The solid-phase synthesis was straightforward with an overall yield ranging from 30% to 35% based on the first Fmoc cleavage. The hydrophilicity increased with spacer length (logD: − 1.95 vs − 2.22 of PEG 2 and PEG 12 analogs, respectively). There is a tendency of increased serum stability by increasing the spacer length (T 1/2 = 246 ± 4 and 584 ± 20 for PEG 2 and PEG 6 analogs, respectively) which seems to reverse with the PEG 12 analog. The IC 50 values are similar with the only significant difference of the PEG 12 analog. The 177 Lu-labeled PEG 4 and PEG 6 conjugates showed similar pharmacokinetic with high tumor uptake and excellent tumor-to-kidney ratios (7.8 and 9.7 at 4 h for the PEG 4 and PEG 6 derivatives, respectively). The pancreas uptake was relatively high at 1 h but it shows fast washout (0.46% ± 0.02% IA/g and 0.29% ± 0.08% IA/g already at 4 h). Conclusion: Among all the studied analogs the PEG 4 and PEG 6 showed significantly better properties. The very high tumor-to-non-target organ ratios, in

  7. Coding and spacer sequences in the 5.8S-2S region of Sciara coprophila ribosomal DNA.

    Science.gov (United States)

    Jordan, B R; Latil-Damotte, M; Jourdan, R

    1980-08-25

    The sequence of 436 nucleotides around the region coding for 5.8S RNA in the Sciara coprophila rDNA transcription unit (1) has been determined. Regions coding for 5.8S and 2S RNAs have been identified; they are 80 - 90% homologous to the corresponding Drosophila sequences and are separated by a 22 nucleotide long spacer. This sequence as well as the two before the 5.8 and after the 2S coding region are very different from the corresponding Drosophila sequences. The main features reported in the Drosophila study (2) are however also found, i.e. all three spacers are very rich in A-T; the sequence of the internal spacer allows base pairing; 5.8S and 2S RNAs can pair through their 3' and 5' terminal regions respectively. The features previously proposed as processing sites in the Drosophila case are thus all found in Sciara in spite of very different spacer sequences.

  8. Biomechanical Analysis of an Expandable Lumbar Interbody Spacer.

    Science.gov (United States)

    Soriano-Baron, Hector; Newcomb, Anna G U S; Malhotra, Devika; Palma, Atilio E; Martinez-Del-Campo, Eduardo; Crawford, Neil R; Theodore, Nicholas; Kelly, Brian P; Kaibara, Taro

    2018-03-13

    Recently developed expandable interbody spacers are widely accepted in spinal surgery; however, the resulting biomechanical effects of their use have not yet been fully studied. We analyzed the biomechanical effects of an expandable polyetheretherketone interbody spacer inserted through a bilateral posterior approach with and without different modalities of posterior augmentation. Biomechanical nondestructive flexibility testing was performed in 7 human cadaveric lumbar (L2-L5) specimens followed by axial compressive loading. Each specimen was tested under 6 conditions: 1) intact, 2) bilateral L3-L4 cortical screw/rod (CSR) alone, 3) WaveD alone, 4) WaveD + CSR, 5) WaveD + bilateral L3-L4 pedicle screw/rod (PSR), and 6) WaveD + CSR/PSR, where CSR/PSR was a hybrid construct comprising bilateral cortical-level L3 and pedicle-level L4 screws interconnected by rods. The range of motion (ROM) with the interbody spacer alone decreased significantly compared with the intact condition during flexion-extension (P = 0.02) but not during lateral bending or axial rotation (P ≥ 0.19). The addition of CSR or PSR to the interbody spacer alone condition significantly decreased the ROM compared with the interbody spacer alone (P ≤ 0.002); and WaveD + CSR, WaveD + PSR, and WaveD + CSR/PSR (hybrid) (P ≥ 0.29) did not differ. The axial compressive stiffness (resistance to change in foraminal height during compressive loading) with the interbody spacer alone did not differ from the intact condition (P = 0.96), whereas WaveD + posterior instrumentation significantly increased compressive stiffness compared with the intact condition and the interbody spacer alone (P ≤ 0.001). The WaveD alone significantly reduced ROM during flexion-extension while maintaining the axial compressive stiffness. CSR, PSR, and CSR/PSR hybrid constructs were all effective in augmenting the expandable interbody spacer system and improving its stability. Copyright © 2018 Elsevier Inc. All

  9. Shelf life of pie caps with biodegradable films as spacers

    Directory of Open Access Journals (Sweden)

    Daniela Verónica Escobar Gianni

    2013-01-01

    Full Text Available Commonly pie caps at market use polyethylene films as spacers between them. This paper studies the conventional spacers replacement with edible and biodegradable films made with whey protein isolate (WPI and potassium sorbate as a preservative. Besides facilitating the separation of pie caps, with this application is intended to increase their shelf life. The films made by the compression molding method were used as spacers in pie caps without preservative in their formula (A and with preservative (B and they were compared with conventional polyethylene spacers (C. During four months, monthly sensory, microbiological and physicochemical (humidity evaluations were done on the pie caps, together with humidity and solubility evaluations of the films. None of the samples showed microbiological or sensory deterioration. The sensory attributes showed no or slight difference in study time. Between samples the differences were minor: the best scores were for sample A in color, sample C in flavor, and samples B and C in texture and overall liking. The edible films have an interesting potential for this application, although studies in disguise the flavor of serum should be done.

  10. Deformation behavior of cell spring of an irradiated spacer grid

    International Nuclear Information System (INIS)

    Jin, Y. G.; Baek, S. J.; Ryu, W. S.; Kim, G. S.; Yoo, B. O.; Kim, D. S.; Ahn, S. B.; Chun, Y. B.; Choo, Y. S.

    2012-01-01

    Mechanical properties of a space grid of a fuel assembly are of great importance for fuel operation reliability in extended fuel burnup and duration of fuel life. The spacer grid with inner and outer straps has cell spring and dimples, which are in contact with the fuel rod. The spacer grids supporting the fuel rods absorb vibration impacts due to the reactor coolant flow and also grid spring force is decreasing under irradiation. This reduction of contact force might cause the grid to rod fretting wear. The fretting failure of the fuel rod is one of the significant issues recently in the nuclear industry from an economical as well as a safety concern. Thus, it is important to understand the characteristics of cell spring behavior for an irradiated spacer grid. In the present study, the stiffness test and dimensional measurement of cell springs were conducted to investigate the deformation behavior of cell springs of an irradiated spacer grid in a hot cell at IMEF (irradiated materials examination facility) of KAERI

  11. Novel spacers for mass transfer enhancement in membrane separations

    NARCIS (Netherlands)

    Li, F.; Meindersma, G.W.; de Haan, A.B.; Reith, T.

    2005-01-01

    The optimal flow pattern for mass transfer enhancement in spacer-filled channels is characterized by the coexistence of transversal and longitudinal vortices in the flow close to the channel walls and minimal cross-flow power consumption in the middle of the channel. The mass transfer enhancement of

  12. Multi-layer spacer geometries with improved mass transport

    NARCIS (Netherlands)

    Balster, J.H.; Punt, Ineke G.M.; Stamatialis, Dimitrios; Wessling, Matthias

    2006-01-01

    In electrodialysis desalination processes, it is desirable to operate at the highest practicable current density in order to get the maximum ion flux per unit membrane area. The operating current density is limited by concentration polarisation. In this work the development of optimal spacer

  13. CRISPR interference and priming varies with individual spacer sequences

    NARCIS (Netherlands)

    Xue, Chaoyou; Seetharam, Arun S.; Musharova, Olga; Severinov, Konstantin; Brouns, Stan J.J.; Severin, Andrew J.; Sashital, Dipali G.

    2015-01-01

    CRISPR-Cas (clustered regularly interspaced short palindromic repeats-CRISPR associated) systems allow bacteria to adapt to infection by acquiring 'spacer' sequences from invader DNA into genomic CRISPR loci. Cas proteins use RNAs derived from these loci to target cognate sequences for

  14. Comparative phylogenetic analysis of intergenic spacers and small ...

    African Journals Online (AJOL)

    Two microsporidian isolates extracted from infected tasar silkworms (Antheraea mylitta) collected from forest area in Deoghar district, Jharkhand, India were subjected to PCR amplification using intergenic spacer (IGS) region and small subunit rRNA (SSU-rRNA) gene specific primers followed by cloning and sequencing.

  15. On the impact analysis of a PWR spacer grid

    International Nuclear Information System (INIS)

    Song, Kee Nam; Lee, S. H.

    2012-01-01

    A spacer grid, which is an interconnected array of slotted grid straps and is welded at the intersections to form an egg crate structure, is one of the most important structural components in a PWR fuel assembly. From a structural point of view, the spacer grid is required to have sufficient crush strength under lateral loads so that nuclear fuel rods are maintained in a cool able geometry, and that control rods can be inserted. The capacity of a spacer grid to resist lateral loads is usually characterized in terms of its crush strength, and it was reported that the lateral crush strength of the spacer grid is closely related with welding quality of the spacer grid. Microstructures in the weld zone, including a heat affected zone (HAZ), are different from that in a parent material. Consequently, the mechanical properties in the weld zone are different from those in the parent material to some extent. When a welded structure is loaded, the mechanical behavior of the welded structure might be different from the case of a structure with homogeneous mechanical properties. Nonetheless, mechanical properties in the welded structure have been neglected in many structural analyses of the spacer grid due to a lack of mechanical properties in the weld zone. When the weld zone is very narrow and the interfaces are not clear, it is difficult to take tensile test specimens in the weld zone. The reason for this is that the mechanical properties in the parent material are usually used in the structural analyses in the welded structure. As an aside, it has been recently determined that the ball indentation technique has the potential to be an excellent substitute for a standard tensile test, particularly in the case of small specimens or property gradient materials such as welds. In this study, to investigate the effect on the mechanical behavior of the spacer grid when using weld mechanical properties, strength analyses considering the weld mechanical properties recently obtained

  16. 3-D flow analyses for design of nuclear fuel spacer

    Energy Technology Data Exchange (ETDEWEB)

    Karouta, Z. [ABB Combustion Engineering, Windsor, CT (United States); GU, Chun-Yuan [ABB Corporate Research, Vaesteras (Sweden); Schoelin, B. [ABB Atom AB, Vaesteras (Sweden)

    1995-09-01

    The Computational Fluid Dynamics (CFD) code, CFDS-FLOW3D, was used to develop improved fuel designs for PWR cores. It was used primarily to understand the fluid dynamics of grid spacers, the mass transfer between subchannels caused by spacers and in the long term to develop two-phase models which enable prediction of critical heat flux in PWR fuel. A single subchannel of one grid span was modeled. In this model different spacer designs with mixing devices were analyzed. A special treatment of the boundary condition was developed making use of flow symmetry to model the mass transfer between different subchannels and minimize the size of the computational model. This reduced the computational model to a fraction of a subchannel using traditional periodic boundary conditions. The Navier-Stokes equation was solved for the liquid and the flow turbulence was modeled by k-{xi} turbulence model. The spacer and mixing device were treated as infinite thin surfaces in the model and a zero velocity condition and turbulent wall function were applied on each side of the thin surfaces. This approach simulated the swirl from the mixing devices well, but had the drawback of not predicting pressure drop accurately since the wake behind the plates and the acceleration effect of the spacers were ignored. CFDS-FLOW3D models with mixing devices were applied in the single-phase flow regime. Velocity profiles from the CFDS-FLOW3D models were compared to Laser Doppler Velocimeter measurements taken from the flow field downstream of spaces in a full scale, cold water test loop. The predicted axial and lateral velocity profiles were in good agreement with the measurements. The evaluation of the performance of different spacer devices was made by comparing the swirl ratio downstream of the grid spacers. It is planned to evaluate heat transfer coefficient downstream of the spaces, to implement two-phase flow models, and to model the superheated boundary layer on the surface of the fuel rod.

  17. Implementation of spacer therapy for acute asthma in children.

    LENUS (Irish Health Repository)

    Vandeleur, M

    2009-09-01

    The aim was to develop and implement an evidence based guideline for the treatment of acute asthma using a metered dose inhaler and spacer combination. Children admitted to Cork University Hospital Paediatric Department with acute asthma were identified during two identical 2 month seasonal periods before (2005) and after (2006) implementation of the new guidelines in September 2006. Pre-intervention and post-intervention audits by case note review were performed to determine the impact of and compliance with this evidence-based guideline emphasising patient assessment, spacer delivered bronchodilator and specific discharge criteria. Patients had similar characteristics during the two study periods. There was a raised threshold for admission after guideline implementation with 11\\/52 patients having mild exacerbations in 2006, compared to 21\\/36 in 2005. Duration of admission was less in the post-implementation group for equivalent exacerbation severity e.g. for moderate severity; 28 hours in 2005, 23 hours in 2006. Duration of bronchodilator therapy was shorter in 2006 and more likely to be given by spacer device earlier for equivalent levels of severity e.g. for moderate exacerbations, in 2006 the average length of salbutamol therapy was 18 hours with 12 hours by spacer device, in 2005 the average length of therapy was 25 hours with 3 hours by spacer. There was earlier initiation of oral corticosteroids; the average time to administration was 56 minutes in 2006 and 227 minutes in 2005. There was an improved documentation of asthma education in 2006 e.g. inhaler technique was reviewed in 37\\/52 in 2006, 21\\/35 in 2005 and better use of written action plans.

  18. Identification of transcribed sequences in the human genome

    Energy Technology Data Exchange (ETDEWEB)

    Gardiner, K.

    1992-12-01

    The workshop was held at the National Institutes of Mental Health, Bethesda, Maryland, on October 4 and 5, 1991. Twenty-four investigators attended from England, Germany and the United States. The topics discussed included: Genome sequence analysis using computer assisted detection of open reading frames, splice sites and hexamer patterns, direct exon identification using trapping of internal and 3' exons, and a recombination based system, cDNA library construction and screening, including the use of normalization and subtraction procedures, Alu and splice donor site PCR from hybrid cell lines, and microdissection clones as probes, use of labeled CDNAS as probes to screen lambda and cosmid libraries, and sequencing of random cDNAs.

  19. Optimization of non-woven spacers by CFD and validation by experiments

    NARCIS (Netherlands)

    Li, F.; Meindersma, G.W.; de Haan, A.B.; Reith, T.

    2002-01-01

    CFD simulations were used to determine mass transfer coefficients and power consumptions in channels filled with non-woven net spacers. The geometric parameters of a non-woven spacer were found to have a great influence on the performance of a spacer in terms of mass transfer enhancement and power

  20. Biofouling Control in Spiral-Wound Membrane Systems: Impact of Feed Spacer Modification and Biocides

    KAUST Repository

    Siddiqui, Amber

    2016-12-01

    High-quality drinking water can be produced with membrane-based filtration processes like reverse osmosis and nanofiltration. One of the major problems in these membrane systems is biofouling that reduces the membrane performance, increasing operational costs. Current biofouling control strategies such as pre-treatment, membrane modification, and chemical cleaning are not sufficient in all cases. Feed spacers are thin (0.8 mm), complex geometry meshes that separate membranes in a module. The main objective of this research was to evaluate whether feed spacer modification is a suitable strategy to control biofouling. Membrane fouling simulator studies with six feed spacers showed differences in biofouled spacer performance, concluding that (i) spacer geometry influences biofouling impact and (ii) biofouling studies are essential for evaluation of spacer biofouling impact. Computed tomography (CT) was found as a suitable technique to obtain three-dimensional (3D) measurements of spacers, enabling more representative mathematical modeling of hydraulic behavior of spacers in membrane systems. A strategy for developing, characterizing, and testing of spacers by numerical modeling, 3D printing of spacers and experimental membrane fouling simulator studies was developed. The combination of modeling and experimental testing of 3D printed spacers is a promising strategy to develop advanced spacers aiming to reduce the impact of biofilm formation on membrane performance and to improve the cleanability of spiral-wound membrane systems.

  1. Transparency in Transcribing: Making Visible Theoretical Bases Impacting Knowledge Construction from Open-Ended Interview Records

    Directory of Open Access Journals (Sweden)

    Audra Skukauskaite

    2012-01-01

    Full Text Available This article presents a reflexive analysis of two transcripts of an open-ended interview and argues for transparency in transcribing processes and outcomes. By analyzing ways in which a researcher's theories become consequential in producing and using transcripts of an open-ended interview, this paper makes visible the importance of examining and presenting theoretical bases of transcribing decisions. While scholars across disciplines have argued that transcribing is a theoretically laden process (GREEN, FRANQUIZ & DIXON, 1997; KVALE & BRINKMAN, 2009, few have engaged in reflexive analyses of the data history to demonstrate the consequences particular theoretical and methodological approaches pose in producing knowledge claims and inciting dialogues across traditions. The article demonstrates how theory-method-claim relationships in transcribing influence research transparency and warrantability. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1201146

  2. Transcribing and digitizing eighteenth- and nineteenth-century letters for a historical digital repository.

    Science.gov (United States)

    Dunster, Emily S; Kipnis, Daniel G; Angelo, F Michael

    2014-01-01

    In fall 2011, the Scott Memorial Library purchased 53 letters belonging to an 1841 graduate of Jefferson Medical College, John Plimpton Green. The library staff transcribed and digitized the letters, creating an online collection in the university's institutional repository, Jefferson Digital Commons. This article will detail the process of transcribing and digitizing the collection along with sharing statistics and the benefits of this project to global researchers.

  3. Effect of plastic spacer handling on salbutamol lung deposition in asthmatic children

    DEFF Research Database (Denmark)

    Lipworth, Brian J; Lee, Daniel K C; Anhøj, Jacob

    2002-01-01

    AIMS: To study the effects of electrostatics in a plastic spacer on the lung deposition of salbutamol in asthmatic children. METHODS: Twenty-five children (5-12 years) with mild asthma were given salbutamol hydrofluoroalkane pressurized metered dose inhaler 400 micro g via a 750 ml plastic spacer.......14 fold (1.24, 3.69), or vs RinsedDelay 3.28 fold (2.13, 5.04). CONCLUSIONS: The relative lung dose of salbutamol from a plastic spacer may differ considerably depending on spacer handling suggesting that nonelectrostatic spacers may be the best way forward....

  4. Heat transfer in smooth and roughened rod bundles near spacer grids

    International Nuclear Information System (INIS)

    Marek, J.; Rehme, K.

    1975-03-01

    An experimental investigation was performed of the heat transfer in smooth and rough rod bundles near spacer grids. Detailed wall temperature distributions were measured which clearly demonstrated that even in rod bundles roughened by artificial roughnesses there are no hot spots near spacer grids. On the basis of the few experimental results from the literature and the new data, heat transfer correlations are proposed for smooth and rough surfaces near spacer grids. These correlations allow a prediction to be made in a good approximation of the heat transfer near spacer grids as a function of the flow contraction due to the spacer. (orig.) [de

  5. Response of an electrostatic probe for a right cylindrical spacer

    DEFF Research Database (Denmark)

    Rerup, T; Crichton, George C; McAllister, Iain Wilson

    1994-01-01

    During the last decade many experimental studies of surface charge phenomena have been undertaken employing right cylindrical spacers. Measurement of the surface charge was performed using small electrostatic field probes to scan across the dielectric surface. Charges are electrostatically induced...... on the sensor plate by the ambient surface charge, and hence as the probe is moved parallel to the surface the potential of the sensor plate changes. The probe sensor-plate potential is thus the parameter of interest as this parameter can be related in a quantitative manner to the surface charge density....... In the present study, the influence of the spacer geometry upon the λ-function is examined. This knowledge allows the response of the probe with reference to detection sensitivity and spatial selectivity to be considered. Such probe characteristics enable general conclusions to be reached about...

  6. An insulating grid spacer for large-area MICROMEGAS chambers

    International Nuclear Information System (INIS)

    Bernard, D.; Delagrange, H.; D'Enterria, D.G.; Guay, M.L.M. Le; Martinez, G.; Mora, M.J.; Pichot, P.; Roy, D.; Schutz, Y.; Gandi, A.; Oliveira, R. de

    2002-01-01

    We present a novel design for large-area gaseous detectors based on the MICROMEGAS technology. This technology incorporates an insulating grid, sandwiched between the micro-mesh and the anode-pad plane, which provides a uniform 200 μm amplification gap. The uniformity of the amplification gap thickness has been verified. The gain performances of the detector are presented and compared to the values obtained with detectors using cylindrical micro spacers. The new design presents several technical and financial advantages

  7. Bimetallic spacer means for a nuclear fuel assembly

    International Nuclear Information System (INIS)

    Anthony, A.J.

    1981-01-01

    A bimetallic spacer means designed to be cooperatively associated with a nuclear fuel assembly and operative to resist the occurrence of in-reactor bowing of the nuclear fuel assembly. The subject bimetallic spacer means in accord with one embodiment of the invention includes a member formed, at least principally, of Zircaloy to which are attached a plurality of stainless steel strips. The latter stainless steel strips are located on the external surface of the Zircaloy member and with the major axis of each of the plurality of stainless steel strips extending substantially perpendicular to the major axis of the Zircaloy member. In accord with another embodiment of the invention, the subject bimetallic spacer means includes a member formed at least principally of Zircaloy to which a plurality of stainless steel strips are attached so as to be positioned thereon externally thereof and with the major axis of each of the plurality of stainless steel strips extending substantially parallel to the major axis of the Zircaloy member. In accord with a further embodiment of the invention, the stainless steel strips are attached to preselected members, each embodying at least a cladding of Zircaloy, which are located in the rows of fuel rods that define the perimeter of the fuel matrix of the nuclear fuel assembly. In each of the embodiments, the stainless steel strips during power production expand outwardly to a greater extent than do the members to which the stainless steel strips are attached, thereby forming stiff springs which abut against like bimetallic spacer means with which the other nuclear fuel assemblies are provided in a given nuclear reactor core to thus prevent the occurrence of in-reactor bowing of the nuclear fuel assemblies. Namely, the stainless steel strips expand laterally relative to the fuel assembly and thereby occupy the space adjacent to the external surface of the fuel assembly

  8. Impact of feed spacer and membrane modification by hydrophilic, bactericidal and biocidal coating on biofouling control

    KAUST Repository

    Araújo, Paula A.

    2012-06-01

    The influence of polydopamine- and polydopamine-. graft-poly(ethylene glycol)-coated feed spacers and membranes, copper-coated feed spacers, and commercially-available biostatic feed spacers on biofouling has been studied in membrane fouling simulators. Feed spacers and membranes applied in practical membrane filtration systems were used; biofouling development was monitored by feed channel pressure drop increase and biomass accumulation. Polydopamine and polydopamine-. g-PEG are hydrophilic surface modification agents expected to resist protein and bacterial adhesion, while copper feed spacer coatings and biocides infused in feed spacers are expected to restrict biological growth. Our studies showed that polydopamine and polydopamine-. g-PEG coatings on feed spacers and membranes, copper coatings on feed spacers, and a commercial biostatic feed spacer did not have a significant impact on feed channel pressure drop increase and biofilm accumulation as measured by ATP and TOC content. The studied spacer and membrane modifications were not effective for biofouling control; it is doubtful that feed spacer and membrane modification, in general, may be effective for biofouling control regardless of the type of applied coating. © 2012 Elsevier B.V.

  9. Increased antibiotic release and equivalent biomechanics of a spacer cement without hard radio contrast agents.

    Science.gov (United States)

    Bitsch, R G; Kretzer, J P; Vogt, S; Büchner, H; Thomsen, M N; Lehner, B

    2015-10-01

    We compared a novel calcium carbonate spacer cement (Copal® spacem) to well-established bone cements. Electron microscopic structure and elution properties of the antibiotics ofloxacin, vancomycin, clindamycin, and gentamicin were examined. A knee wear simulator model for articulating cement spacers was established. Mechanical tests for bending strength, flexural modulus, and compressive and fatigue strength were performed. The electron microscopic analysis showed a microporous structure of the spacer cement, and this promoted a significantly higher and longer antibiotic elution. All spacer cement specimens released the antibiotics for a period of up to 50days with the exception of the vancomycin loading. The spacer cement showed significantly less wear scars and fulfilled the ISO 5833 requirements. The newly developed spacer cement is a hydrophilic antibiotic carrier with an increased release. Cement without hard radio contrast agents can improve tribological behaviour of spacers, and this may reduce reactive wear particles and abrasive bone defects. Copyright © 2015 Elsevier Inc. All rights reserved.

  10. Independent tuning of double plasmonic waves in a free-standing graphene-spacer-grating-spacer-graphene hybrid slab.

    Science.gov (United States)

    Chen, Ying; Yao, Jin; Song, Zhengyong; Ye, Longfang; Cai, Guoxiong; Liu, Qing Huo

    2016-07-25

    The independent excitation and tuning of double plasmonic waves are realized in a free-standing graphene-spacer-grating-spacer-graphene (GSGSG) hybrid slab, which consists of two graphene field effect transistors placed back-to-back to each other. Resulted from the high transparency and the tight confinement of surface plasmonic mode for the graphene, double plasmonic waves can be independently excited by guided-mode resonances (GMRs). Theoretical and numerical investigations are performed in the mid-infrared band. Furthermore, the tuning of individual GMR resonant wavelengths with respect to the system parameters is studied. The results provide opportunities to engineer the proposed hybrid slab for wavelength selective and multiplexing applications.

  11. Development and characterization of 3D-printed feed spacers for spiral wound membrane systems

    KAUST Repository

    Siddiqui, Amber

    2016-01-02

    Feed spacers are important for the impact of biofouling on the performance of spiral-wound reverse osmosis (RO) and nanofiltration (NF) membrane systems. The objective of this study was to propose a strategy for developing, characterizing, and testing of feed spacers by numerical modeling, three-dimensional (3D) printing of feed spacers and experimental membrane fouling simulator (MFS) studies. The results of numerical modeling on the hydraulic behavior of various feed spacer geometries suggested that the impact of spacers on hydraulics and biofouling can be improved. A good agreement was found for the modeled and measured relationship between linear flow velocity and pressure drop for feed spacers with the same geometry, indicating that modeling can serve as first step in spacer characterization. An experimental comparison study of a feed spacer currently applied in practice and a 3D printed feed spacer with the same geometry showed (i) similar hydraulic behavior, (ii) similar pressure drop development with time and (iii) similar biomass accumulation during MFS biofouling studies, indicating that 3D printing technology is an alternative strategy for development of thin feed spacers with a complex geometry. Based on the numerical modeling results, a modified feed spacer with low pressure drop was selected for 3D printing. The comparison study of the feed spacer from practice and the modified geometry 3D printed feed spacer established that the 3D printed spacer had (i) a lower pressure drop during hydraulic testing, (ii) a lower pressure drop increase in time with the same accumulated biomass amount, indicating that modifying feed spacer geometries can reduce the impact of accumulated biomass on membrane performance. The combination of numerical modeling of feed spacers and experimental testing of 3D printed feed spacers is a promising strategy (rapid, low cost and representative) to develop advanced feed spacers aiming to reduce the impact of biofilm formation on

  12. Fulltext PDF

    Indian Academy of Sciences (India)

    2011-08-19

    Aug 19, 2011 ... nal transcribed spacers (ITS 1 and 2) to separate them and two external transcribed spacers (5 ETS and 3 ... E-mail: lakraws@hotmail.com. various organisms, although the spacer regions are less con- served. .... internal control regions (figure 3) that functions as a pro- moter for the gene (Hallenberg et al.

  13. An insulating grid spacer for large-area MICROMEGAS chambers

    CERN Document Server

    Bernard, D; D'Enterria, D G; Le Guay, M; Martínez, G; Mora, M J; Pichot, P; Roy, D; Schutz, Y; Gandi, A; De Oliveira, R

    2002-01-01

    We present an original design for large area gaseous detectors based on the MICROMEGAS technology. This technology incorporates an insulating grid, sandwiched between the micro-mesh and the anode-pad plane, which provides an uniform 200 $\\mu$m amplification gap. The uniformity of the amplification gap thickness has been verified under several experimental conditions. The gain performances of the detector are presented and compared to the values obtained with detectors using cylindrical micro spacers. The new design presents several technical and financial advantages.

  14. Spacer grid with mixing blades for nuclear fuel assembly

    International Nuclear Information System (INIS)

    Noailly, J.

    1986-01-01

    The spacer grid for nuclear fuel assembly has two sets of intersecting metal plates provided with blades and defining cells. The plates are fitted only with half-blades associated with a single grid opening. The half-blades of adjacent cells are arranged at 90deg C to each other and each plate has at most one half-blade at each corner of a cell. The invention concerns fuel assemblies of pressurized water reactors. The blades arranged on a single side of the plate provide a good hydraulic uniformity. The invention provides a uniform distribution of blades (and thus of absorbing material in each hydraulic cell) [fr

  15. In vitro microbiologic evaluation of PTFE and cotton as spacer materials.

    Science.gov (United States)

    Paranjpe, Avina; Jain, Sumita; Alibhai, Karim J; Wadhwani, Chandur P; Darveau, Richard P; Johnson, James D

    2012-09-01

    To microbiologically evaluate the efficacy of cotton and polytetrafluoroethylene (PTFE) tape used as spacer materials. Twenty-six extracted human molars were restored using either cotton or PTFE tape as spacers under a standardized provisional restorative material (Cavit). The teeth were incubated for 7 days in a culture of Streptococcus gordonii or in liquid media alone. The spacers were removed and tested for bacterial contamination. The access cavities were also evaluated for bacterial contamination. Nine of 10 teeth with cotton spacers and one of 10 teeth with PTFE spacers were positive for S gordonii growth. The nine teeth in the cotton group also showed contamination of the access cavities. Even under optimal conditions, cotton spacers may cause leakage into the access cavities. Cotton fibers may serve as a route for bacterial contamination of the access cavities and root canal space. In contrast, PTFE tape did not provide an avenue for bacterial contamination.

  16. Transcriptional regulator-mediated activation of adaptation genes triggers CRISPR de novo spacer acquisition

    DEFF Research Database (Denmark)

    Liu, Tao; Li, Yingjun; Wang, Xiaodi

    2015-01-01

    Acquisition of de novo spacer sequences confers CRISPR-Cas with a memory to defend against invading genetic elements. However, the mechanism of regulation of CRISPR spacer acquisition remains unknown. Here we examine the transcriptional regulation of the conserved spacer acquisition genes in Type I......, it was demonstrated that the transcription level of csa1, cas1, cas2 and cas4 was significantly enhanced in a csa3a-overexpression strain and, moreover, the Csa1 and Cas1 protein levels were increased in this strain. Furthermore, we demonstrated the hyperactive uptake of unique spacers within both CRISPR loci...... in the presence of the csa3a overexpression vector. The spacer acquisition process is dependent on the CCN PAM sequence and protospacer selection is random and non-directional. These results suggested a regulation mechanism of CRISPR spacer acquisition where a single transcriptional regulator senses the presence...

  17. Transcribed sequences in the human genome to be held in San Francisco, November 7 and 8, 1992. Final report, September 1, 1992--August 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Gardiner, K.

    1993-11-01

    The Second International Workshop on the Identification of Transcribed Sequences was held in San Francisco on November 7--8, 1992. The purpose of the workshop was to discuss and evaluate techniques for developing a complete transcriptional map of the human genome. Such a map requires the positions, sequences, and expression patterns of all genes. This goal is being approached from two different directions, each with strengths and weaknesses. One method is to identify the transcribed sequences from genomic DNA of a given region; the other is to systematically sequence and map cDNAs. The cDNA approach yields sequence information rapidly, but mapping each cDNA is a technical challenge. In the first approach, the map locations of genomic sequences are known at the outset, and the challenge is to identify exons. The efficient construction of a transcriptional map will require a diverse array of techniques.

  18. Electrostatic charge on a plastic spacer device influences the delivery of salbutamol.

    Science.gov (United States)

    Wildhaber, J H; Devadason, S G; Hayden, M J; James, R; Dufty, A P; Fox, R A; Summers, Q A; LeSouëf, P N

    1996-09-01

    The aim of this study was to determine whether electrostatic charge on a plastic spacer decreases the delivery of salbutamol from a pressurized metered-dose inhaler (pMDI) and, if so, to find an optimal and practical treatment to remove the charge. Ten single actuations from a salbutamol pMDI were drawn through different Volumatic spacers at a constant flow of 60 L.min-1. The efficacies of different methods of removing charge were tested, including detergent coating of the spacers. A multistage liquid impinger was used to determine the particle size distribution of the output of the pMDI through the Volumatic spacers. The electrostatic charge on the inner surface of the spacers was measured both quantitatively with an electrometer, and qualitatively by the attraction of a thin strip of cellulose membrane to the wall of the spacer. Each experiment was repeated four times. Ionic detergent coating of the spacers removed the charge for at least 24 h. This resulted in an increase of 55-70% in small particle (< 6.8 microns) delivery compared to delivery from new spacers with high charge. We have demonstrated that electrostatic charge plays a major role in the delivery of salbutamol through plastic spacers. Adequate treatment with ionic detergent removes the charge and improves drug delivery.

  19. Nanoparticle-Based Brachytherapy Spacers for Delivery of Localized Combined Chemoradiation Therapy

    International Nuclear Information System (INIS)

    Kumar, Rajiv; Belz, Jodi; Markovic, Stacey; Jadhav, Tej; Fowle, William; Niedre, Mark; Cormack, Robert; Makrigiorgos, Mike G.; Sridhar, Srinivas

    2015-01-01

    Purpose: In radiation therapy (RT), brachytherapy-inert source spacers are commonly used in clinical practice to achieve high spatial accuracy. These implanted devices are critical technical components of precise radiation delivery but provide no direct therapeutic benefits. Methods and Materials: Here we have fabricated implantable nanoplatforms or chemoradiation therapy (INCeRT) spacers loaded with silica nanoparticles (SNPs) conjugated containing a drug, to act as a slow-release drug depot for simultaneous localized chemoradiation therapy. The spacers are made of poly(lactic-co-glycolic) acid (PLGA) as matrix and are physically identical in size to the commercially available brachytherapy spacers (5 mm × 0.8 mm). The silica nanoparticles, 250 nm in diameter, were conjugated with near infrared fluorophore Cy7.5 as a model drug, and the INCeRT spacers were characterized in terms of size, morphology, and composition using different instrumentation techniques. The spacers were further doped with an anticancer drug, docetaxel. We evaluated the in vivo stability, biocompatibility, and biodegradation of these spacers in live mouse tissues. Results: The electron microscopy studies showed that nanoparticles were distributed throughout the spacers. These INCeRT spacers remained stable and can be tracked by the use of optical fluorescence. In vivo optical imaging studies showed a slow diffusion of nanoparticles from the spacer to the adjacent tissue in contrast to the control Cy7.5-PLGA spacer, which showed rapid disintegration in a few days with a burst release of Cy7.5. The docetaxel spacers showed suppression of tumor growth in contrast to control mice over 16 days. Conclusions: The imaging with the Cy7.5 spacer and therapeutic efficacy with docetaxel spacers supports the hypothesis that INCeRT spacers can be used for delivering the drugs in a slow, sustained manner in conjunction with brachytherapy, in contrast to the rapid clearance of the drugs when

  20. Single-electron transistors fabricated with sidewall spacer patterning

    Science.gov (United States)

    Park, Byung-Gook; Kim, Dae Hwan; Kim, Kyung Rok; Song, Ki-Whan; Lee, Jong Duk

    2003-09-01

    We have implemented a sidewall spacer patterning method for novel dual-gate single-electron transistor (DGSET) and metal-oxide-semiconductor-based SET (MOSET) based on the uniform SOI wire, using conventional lithography and processing technology. A 30 nm wide silicon quantum wire is defined by a sidewall spacer patterning method, and depletion gates for two tunnel junctions of the DGSET are formed by the doped polycrystalline silicon sidewall. The fabricated DGSET and MOSET show clear single-electron tunneling phenomena at liquid nitrogen temperature and insensitivity of the Coulomb oscillation period to gate bias conditions. On the basis of the phase control capability of the sidewall depletion gates, we have proposed a complementary self-biasing method, which enables the SET/CMOS hybrid multi-valued logic (MVL) to operate perfectly well at high temperature, where the peak-to-valley current ratio of Coulomb oscillation severely decreases. The suggested scheme is evaluated by SPICE simulation with an analytical DGSET model, and it is confirmed that even DGSETs with a large Si island can be utilized efficiently in the multi-valued logic.

  1. Identification of human chromosome 22 transcribed sequences with ORF expressed sequence tags

    Science.gov (United States)

    de Souza, Sandro J.; Camargo, Anamaria A.; Briones, Marcelo R. S.; Costa, Fernando F.; Nagai, Maria Aparecida; Verjovski-Almeida, Sergio; Zago, Marco A.; Andrade, Luis Eduardo C.; Carrer, Helaine; El-Dorry, Hamza F. A.; Espreafico, Enilza M.; Habr-Gama, Angelita; Giannella-Neto, Daniel; Goldman, Gustavo H.; Gruber, Arthur; Hackel, Christine; Kimura, Edna T.; Maciel, Rui M. B.; Marie, Suely K. N.; Martins, Elizabeth A. L.; Nóbrega, Marina P.; Paçó-Larson, Maria Luisa; Pardini, Maria Inês M. C.; Pereira, Gonçalo G.; Pesquero, João Bosco; Rodrigues, Vanderlei; Rogatto, Silvia R.; da Silva, Ismael D. C. G.; Sogayar, Mari C.; de Fátima Sonati, Maria; Tajara, Eloiza H.; Valentini, Sandro R.; Acencio, Marcio; Alberto, Fernando L.; Amaral, Maria Elisabete J.; Aneas, Ivy; Bengtson, Mário Henrique; Carraro, Dirce M.; Carvalho, Alex F.; Carvalho, Lúcia Helena; Cerutti, Janete M.; Corrêa, Maria Lucia C.; Costa, Maria Cristina R.; Curcio, Cyntia; Gushiken, Tsieko; Ho, Paulo L.; Kimura, Elza; Leite, Luciana C. C.; Maia, Gustavo; Majumder, Paromita; Marins, Mozart; Matsukuma, Adriana; Melo, Analy S. A.; Mestriner, Carlos Alberto; Miracca, Elisabete C.; Miranda, Daniela C.; Nascimento, Ana Lucia T. O.; Nóbrega, Francisco G.; Ojopi, Élida P. B.; Pandolfi, José Rodrigo C.; Pessoa, Luciana Gilbert; Rahal, Paula; Rainho, Claudia A.; da Ro's, Nancy; de Sá, Renata G.; Sales, Magaly M.; da Silva, Neusa P.; Silva, Tereza C.; da Silva, Wilson; Simão, Daniel F.; Sousa, Josane F.; Stecconi, Daniella; Tsukumo, Fernando; Valente, Valéria; Zalcberg, Heloisa; Brentani, Ricardo R.; Reis, Luis F. L.; Dias-Neto, Emmanuel; Simpson, Andrew J. G.

    2000-01-01

    Transcribed sequences in the human genome can be identified with confidence only by alignment with sequences derived from cDNAs synthesized from naturally occurring mRNAs. We constructed a set of 250,000 cDNAs that represent partial expressed gene sequences and that are biased toward the central coding regions of the resulting transcripts. They are termed ORF expressed sequence tags (ORESTES). The 250,000 ORESTES were assembled into 81,429 contigs. Of these, 1,181 (1.45%) were found to match sequences in chromosome 22 with at least one ORESTES contig for 162 (65.6%) of the 247 known genes, for 67 (44.6%) of the 150 related genes, and for 45 of the 148 (30.4%) EST-predicted genes on this chromosome. Using a set of stringent criteria to validate our sequences, we identified a further 219 previously unannotated transcribed sequences on chromosome 22. Of these, 171 were in fact also defined by EST or full length cDNA sequences available in GenBank but not utilized in the initial annotation of the first human chromosome sequence. Thus despite representing less than 15% of all expressed human sequences in the public databases at the time of the present analysis, ORESTES sequences defined 48 transcribed sequences on chromosome 22 not defined by other sequences. All of the transcribed sequences defined by ORESTES coincided with DNA regions predicted as encoding exons by genscan. (http://genes.mit.edu/GENSCAN.html). PMID:11070084

  2. Transcribing Gail Jefferson: The 1977 Boston talk as it actually was

    DEFF Research Database (Denmark)

    Nevile, Maurice Richard

    2015-01-01

    A talk by Gail Jefferson, one of the founders of Conversation Analysis, has been recently made available, and Maurice Nevile undertook to transcribe it for the benefit of the language-in-interaction community. Here he reports on what it meant to him, and what we can all get out of such a powerful...

  3. Transcribed enhancers lead waves of coordinated transcription in transitioning mammalian cells

    DEFF Research Database (Denmark)

    Arner, Erik; Daub, Carsten O.; Vitting-Seerup, Kristoffer

    2015-01-01

    Although it is generally accepted that cellular differentiation requires changes to transcriptional networks, dynamic regulation of promoters and enhancers at specific sets of genes has not been previously studied en masse. Exploiting the fact that active promoters and enhancers are transcribed, ...

  4. Teachers' Perceptions of Need for and Competency in Transcribing Braille Materials in the Nemeth Code.

    Science.gov (United States)

    DeMario, Norma C.; Lian, Ming-Gon John

    2000-01-01

    A survey asked 205 teachers of students with visual impairments to rate their perceived competency in transcribing math materials into the Nemeth code (the Braille code for math) and their need to do so. Results indicated a significant difference between mean rating on competency and need for 23 of the 55 listed math skills. (Contains references.)…

  5. Identification of human chromosome 22 transcribed sequences with ORF expressed sequence tags

    DEFF Research Database (Denmark)

    de Souza, S J; Camargo, A A; Briones, M R

    2000-01-01

    Transcribed sequences in the human genome can be identified with confidence only by alignment with sequences derived from cDNAs synthesized from naturally occurring mRNAs. We constructed a set of 250,000 cDNAs that represent partial expressed gene sequences and that are biased toward the central ...

  6. Analysis of a ribosomal DNA intergenic spacer region from the yellow fever mosquito, Aedes aegypti.

    Science.gov (United States)

    Wu, C C; Fallon, A M

    1998-02-01

    We have sequenced the 1.8 kb intergenic spacer (IGS) region from an Aedes aegypti ribosomal DNA repeat and have identified conserved functional motifs shared with the related mosquito, Aedes albopictus. Despite the shorter length and greater homogeneity of the Ae. aegypti IGS region, the sequences of two potential RNA polymerase I core promoters and closely associated terminator elements were highly conserved. Primer extension analysis indicated that the predominant transcription initiation site in the Ae. aegypti rDNA repeat unit region lay at or near the A residue at nucleotide position 1003 in the 'upstream' RNA polymerase I promoter. This observation was supported by the higher sequence identity between the upstream promoters in Ae. aegypti and Ae. albopictus, relative to the downstream promoters. In contrast to strong similarities among proximal regulatory elements, the Ae. aegypti IGS sequence upstream of the transcription initiation site lacked the ordered array of contiguous approximately 200 nucleotide subrepeats previously found in the IGS of Ae. albopictus. In Ae. aegypti, only 4 approximately 50 nucleotide R subrepeats separated by unique sequences, followed by 2 approximately 50 nucleotide E subrepeats, occurred upstream of the transcription initiation site. Despite their differences in size and sequence, however, the four Ae. aegypti R subrepeats shared an internal structural organization that included a conserved core with 'spacer' promoters and recombinogenic elements similar to those in the longer Ae. albopictus subrepeats. These observations provide an important basis for further characterization of transcription specificity among mosquito RNA polymerase I promoters and associated regulatory elements, and contribute towards the eventual use of these elements in transgenic applications.

  7. Long-Term Outcomes of Permanent Cement Spacers in the Infected Foot.

    Science.gov (United States)

    Elmarsafi, Tammer; Oliver, Noah G; Steinberg, John S; Evans, Karen K; Attinger, Christopher E; Kim, Paul J

    When osteomyelitis occurs in the infected foot, cement spacers have been used as a limb salvage tool. The aim of the present study was to assess the longevity and outcomes in high-risk, low-demand patients who have undergone resection of bone and subsequent placement of permanent antibiotic-eluting cement spacers in the foot. A retrospective review case series of 30 patients who had undergone placement of a permanent antibiotic-eluting cement spacer in the foot were evaluated for retention, spacer exchange, removal, amputation, and functional status. The minimum follow-up time for inclusion was 12 months. Two thirds of all patients had successful spacers (n = 20) that were either retained (n = 14) or successfully exchanged (n = 6). One third of all patients experienced spacer failure (n = 10) and required removal. Of the 10 patients requiring spacer removal, 4 underwent removal with subsequent arthrodesis and 6 underwent removal with subsequent pseudoarthrosis. Also, 8 of these patients (26.7%) required partial foot amputation of the ipsilateral foot. These amputations were not directly related to the use or removal of the spacer. The average time to spacer removal or partial amputation was 20.9 (range 0.2 to 60.9) months. The longest retained spacer in the foot was 76 months at the last follow-up visit. The longest exchanged spacer at the last follow-up visit was 111 months. All surviving patients were ambulatory at the last follow-up visit. Copyright © 2016 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

  8. The influence of the preliminary garter spring spacer simulator clamping force in the pressure tube spacer -calandria tube hook-up simulator aging behaviour

    International Nuclear Information System (INIS)

    Gyongyosi, T.; Deloreanu, G.; Puiu, D.; Corbescu, B.; Anghel, N.; Dinu, E.

    2016-01-01

    The garter spring spacer is a specially constructed torsion spring used to fit-out the CANDU 6 fuel channel. The pressure tube ageing decreases the gap to the calandria tube. Continuous gap decrease directly affects the garter spring spacers behavior during fuel channel assembly operation. The preliminary clamping force value of the garter spring spacer assembly is important for its ageing behavior. This paper briefly describes the experimental technological facilities used for conducted the experiments and highlights some of the important moments during an experiment carried out in laboratory conditions, without using pressurized boiled water and irradiation working conditions. The results analysis and some conclusions are outlined at the end, pointing out that a garter spring spacer preliminary clamping force increase reduces the vibration response signal amplitude, and does not lead to its relaxation. The paper is dedicated to specialists working in research and technological engineering. (authors)

  9. Magnetic decoupling of ferromagnetic metals through a graphene spacer

    Energy Technology Data Exchange (ETDEWEB)

    Grimaldi, I.; Papagno, M. [Dipartimento di Fisica, Universitá della Calabria, Arcavacata di Rende (CS), 87036 (Italy); Ferrari, L. [Istituto dei Sistemi Complessi, Consiglio Nazionale delle Ricerche, Roma I-00133 (Italy); Istituto di Struttura della Materia, Consiglio Nazionale delle Ricerche, Trieste (Italy); Sheverdyaeva, P.M.; Mahatha, S.K. [Istituto di Struttura della Materia, Consiglio Nazionale delle Ricerche, Trieste (Italy); Pacilé, D., E-mail: daniela.pacile@fis.unical.it [Dipartimento di Fisica, Universitá della Calabria, Arcavacata di Rende (CS), 87036 (Italy); Istituto di Struttura della Materia, Consiglio Nazionale delle Ricerche, Trieste (Italy); Carbone, C. [Istituto di Struttura della Materia, Consiglio Nazionale delle Ricerche, Trieste (Italy)

    2017-03-15

    We study the magnetic coupling between different ferromagnetic metals (FMs) across a graphene (G) layer, and the role of graphene as a thin covalent spacer. Starting with G grown on a FM substrate (Ni or Co), we deposited on top at room temperature several FM metals (Fe, Ni, Co). By measuring the dichroic effect of 3p photoemission lines we detect the magnetization of the substrate and the sign of the exchange coupling in FM overlayer at room temperature. We show that the G layer magnetically decouples the FM metals. - Highlights: • The magnetic coupling between ferromagnets mediated by graphene is studied. • To this end, the linear dichroic effect in 3p photoemission lines is employed. • For selected junctions no magnetic coupling is attained through graphene. • Graphene inhibits the magnetic alignment that normally occurs between ferromagnets.

  10. Solution-processed organic tandem solar cells with embedded optical spacers

    NARCIS (Netherlands)

    Hadipour, Afshin; de Boer, Bert; Blom, Paul W. M.

    2007-01-01

    We demonstrate a solution-processed polymer tandem solar cell in which the two photoactive single cells are separated by an optical spacer. The use of an optical spacer allows for an independent optimization of both the electronic and optical properties of the tandem cell. The optical transmission

  11. Single electron transistor with P-type sidewall spacer gates.

    Science.gov (United States)

    Lee, Jung Han; Li, Dong Hua; Lee, Joung-Eob; Kang, Kwon-Chil; Kim, Kyungwan; Park, Byung-Gook

    2011-07-01

    A single-electron transistor (SET) is one of the promising solutions to overcome the scaling limit of the Metal-Oxide-Semiconductor Field Effect Transistor (MOSFET). Up to now, various kinds of SETs are being proposed and SETs with a dual gate (DG) structure using an electrical potential barrier have been demonstrated for room temperature operation. To operate DG-SETs, however, extra bias of side gates is necessary. It causes new problems that the electrode for side gates and the extra bias for electrical barrier increase the complexity in circuit design and operation power consumption, respectively. For the reason, a new mechanism using work function (WF) difference is applied to operate a SET at room temperature by three electrodes. Its structure consists of an undoped active region, a control gate, n-doped source/drain electrodes, and metal/silicide or p-type silicon side gates, and a SET with metal/silicide gates or p-type silicon gates forms tunnel barriers induced by work function between an undoped channel and grounded side gates. Via simulation, the effectiveness of the new mechanism is confirmed through various silicide materials that have different WF values. Furthermore, by considering the realistic conditions of the fabrication process, SET with p-type sidewall spacer gates was designed, and its brief fabrication process was introduced. The characteristics of its electrical barrier and the controllability of its control gate were also confirmed via simulation. Finally, a single-hole transistor with n-type sidewall spacer gates was designed.

  12. Pros and cons of symmetrical dual-k spacer technology in hybrid FinFETs

    Science.gov (United States)

    Pradhan, K. P.; Andrade, M. G. C.; Sahu, P. K.

    2016-12-01

    The symmetrical dual-k spacer technology in hybrid FinFETs has been widely explored for better electrostatic control of the fin-based devices in nanoscale region. Since, high-k tangible spacer materials are broadly became a matter of study due to their better immunity to the short channel effects (SCEs) in nano devices. However, the only cause that restricts the circuit designers from using high-k spacer is the unreasonable increasing fringing capacitances. This work quantitatively analyzed the benefits and drawbacks of considering two different dielectric spacer materials symmetrically in either sides of the channel for the hybrid device. From the demonstrated results, the inclusion of high-k spacer predicts an effective reduction in off-state leakage along with an improvement in drive current. However, these devices have paid the cost in terms of a high total gate-to-gate capacitance (Cgg) that consequently results poor cutoff frequency (fT) and delay.

  13. Intraoperative molds to create an articulating spacer for the infected knee arthroplasty.

    Science.gov (United States)

    Van Thiel, Geoffrey S; Berend, Keith R; Klein, Gregg R; Gordon, Alexander C; Lombardi, Adolph V; Della Valle, Craig J

    2011-04-01

    Chronic infections in TKA have been traditionally treated with a two-stage protocol incorporating a temporary antibiotic-loaded cement spacer. The use of a static as opposed to an articulating spacer is controversial. Some surgeons believe a static spacer results in a higher rate of infection eradication, whereas others believe an articulating spacer provides equivalent rates of infection control with improved function between stages and the potential for better eventual range of motion. We determined the rates of infection control and postoperative function for an articulating all-cement antibiotic spacer fashioned intraoperatively from prefabricated silicone molds. We retrospectively reviewed 60 patients with an infected TKA using the same cement-on-cement articulating spacer. A minimum of 4 g antibiotic per package of cement was used when making the spacer. Complications and pre- and postoperative knee flexion, extension, and Knee Society scores were recorded. Bone loss associated with the spacer was determined radiographically and by intraoperative inspection of the bony surfaces at the second stage. Minimum followup was 24 months (mean, 35 months; range, 24-51 months). Seven patients (12%) became reinfected, four with an organism different from that identified at the index resection arthroplasty. One spacer femoral component broke between stages but did not require any specific treatment. We identified no bone loss between stages and no complications related to the cement-on-cement articulation. The mean pretreatment Knee Society scores of 53 improved to 79. The mean preoperative flexion of 90.6º improved to 101.3º at final followup. An articulating antibiotic spacer was associated with control of a deep periprosthetic infection in 88% of patients while allowing range of motion between stages. Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

  14. BWR fuel assembly with improved spacer and fuel bundle design for enhanced thermal-hydraulic performance

    International Nuclear Information System (INIS)

    Mildrum, C.M.; Taleyarkhan, R.P.

    1987-01-01

    In a fuel assembly having a bundle of elongated fuel rods disposed in side-by-side relationship so as to form an array of spaced fuel rods, an outer tubular flow channel surrounding the fuel rods so as to direct flow of coolant/moderator fluid along the fuel rods, a hollow water cross extending centrally through and interconnected with the outer flow channel so as to divide the channel into separate compartments and the bundle of fuelrods into a plurality of mini-bundles thereof being disposed in the compartments, and spacers axially displaced along the fuel rods in each of the mini-bundles thereof. Each spacer is composed of inner and outer means which together define spacer cells at corner, side and interior locations of the spacer and have respective protrusions formed thereon which extend into cells so as to maintain the fuel rods received through the spacer cells in laterally spaced relationships. The improvement is described which comprises: (a) a generally uniform poison coating within at least a majority of the fuel rods; (b) a predetermined pattern of fuel enrichment with respect to the fuel rods of each mini-bundle thereof which together with the uniform poison coating within the fuel rods ensures that the packing powers of the fuel rods in the corner and side cells of the spacers are less than the peaking power of a leading one of the fuel rods in the interior cells of the spacers; and (c) each of the fuel rods being received through the cells of each spacer having a diametric size smaller than that of each of the fuel rods received through the side and interior cells of each spacer, the diametric sizes of each of the fuel rods received through the side and interior cells of each spacer being generally equal

  15. Polyetheretherketone (PEEK) Spacers for Anterior Cervical Fusion: A Retrospective Comparative Effectiveness Clinical Trial.

    Science.gov (United States)

    Lemcke, Johannes; Al-Zain, Ferass; Meier, Ullrich; Suess, Olaf

    2011-01-01

    Anterior cervical decompression and fusion (ACDF) is the standard surgical treatment for radiculopathy and myelopathy. Polyetheretherketone (PEEK) has an elasticity similar to bone and thus appears well suited for use as the implant in ACDF procedures. The aim of this study is to examine the clinical and radiographic outcome of patients treated with standing alone PEEK spacers without bone morphogenic protein (BMP) or plating and to examine the influence of the different design of the two spacers on the rate of subsidence and dislocation. This retrospective comparative study reviewed 335 patients treated by ACDF in a specialized urban hospital for radiculopathy or myelopathy due to degenerative pathologies. The Intromed PEEK spacer was used in 181 patients from 3/2002 to 11/2004, and the AMT SHELL spacer was implanted in 154 patients from 4/2004 to 12/2007. The follow-up rate was 100% at three months post-op and 82.7% (277 patients) at one year. The patients were assessed with the Japanese Orthopedic Association (JOA) questionnaire and radiographically. At the one-year follow-up there were 118/277 patients with an excellent clinical outcome on the JOA, 112/277 with a good outcome, 20/277 with a fair outcome, and 27/277 with a poor outcome. Subsidence was observed in 13.3% of patients with the Intromed spacer vs 8.4% of the patients with the AMT SHELL. Dislocation of the spacer was observed in 10 of the 181 patients with Intromed spacers but in none of the 154 patients with Shell spacers. The study demonstrates that ACDF with standing alone PEEK cages leads to excellent and good clinical outcomes. The differences we observed in the subsidence rate between the two spacers were not significant and cannot be related to a single design feature of the spacers.

  16. In vitro performance of three combinations of spacers and pressurized metered dose inhalers for treatment in children

    DEFF Research Database (Denmark)

    Berg, E; Madsen, J; Bisgaard, H

    1998-01-01

    The performance of pressurized metered dose inhalers (pMDIs) and spacers in correct dose recommendations is important, but limited information on dose delivery and fine-particle dose from different combinations of spacers and pMDIs is available. In this study, three combinations of spacers and p...... and spacers, with the NebuChamber giving the highest dose, both as delivered dose and in droplets account for these differences....

  17. A Study on Cell Size of Irradiated Spacer Grid for PWR Fuel

    International Nuclear Information System (INIS)

    Jin, Y. G.; Kim, G. S.; Ryu, W. S. and others

    2014-01-01

    The spacer grids supporting the fuel rods absorb vibration impacts due to the reactor coolant flow, and grid spring force decreases under irradiation. This reduction of contact force might cause grid-to-rod fretting wear. The fretting failure of the fuel rod is one of the recent significant issues in the nuclear industry from an economical as well as a safety concern. Thus, it is important to understand the characteristics of cell spring behavior and the change in size of grid cells for an irradiated spacer grid. In the present study, the dimensional measurement of a spacer grid was conducted to investigate the cell size of an irradiated spacer grid in a hot cell at IMEF (Irradiated Materials Examination Facility) of KAERI. To evaluate the fretting wear performance of an irradiated spacer grid, hot cell tests were carried out at IMEF of KAERI. Hot cell examinations include dimensional measurements for the irradiated spacer grid. The change of cell sizes was dependent on the direction of the spacer grids, leading to significant gap variations. It was found that the change in size of the cell springs due to irradiation-induced stress relaxation and creep during the fuel residency in the reactor core affect the contact behavior between the fuel rod and the cell spring

  18. Detection and repositioning of tight fighting annulus spacers in CANDU® fuel channels

    Energy Technology Data Exchange (ETDEWEB)

    Hersak, G.; Kittmer, A. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada); Goszczynski, J. [Candu Energy Inc., Mississauga, Ontario (Canada); Kazimer, D. [Bruce Power, Tiverton, Ontario (Canada)

    2014-06-15

    The latest generation of CANDU® reactors has been constructed with tight-fitting annulus spacers to maintain the annular gap between the inner pressure tubes and the outer calandria tubes. These spacers cannot be detected and repositioned with the existing Spacer Location and Repositioning (SLAR) process, which is designed to work with loose-fitting annulus spacers. There is currently no established technology to detect and reposition tight-fitting annulus spacers. Atomic Energy of Canada Limited has been performing research and development to locate and move tight-fitting annulus spacers using Modal Detection and Repositioning (MODAR) technology since 2005 and is currently working in collaboration with Candu Energy and Bruce Power on a production system to be deployed for an In-reactor demonstration in the next year. The MODAR technology uses controlled vibrations on a short, isolated length of pressure tube to locate and reposition tight-fitting annulus spacers. MODAR technology will allow the utilities to demonstrate fuel channel integrity to the regulator and obtain approval for additional years of reactor operation. This paper briefly describes the technology and provides an overview of the tool testing and development. (author)

  19. Evaluation of spacer grid spring characteristics by means of physical tests and numerical simulation

    Energy Technology Data Exchange (ETDEWEB)

    Schettino, Carlos Frederico Mattos, E-mail: carlosschettino@inb.gov.br [Industrias Nucleares do Brasil (INB), Resende, RJ (Brazil)

    2017-11-01

    Among all fuel assemblies' components, the spacer grids play an important structural role during the energy generation process, mainly due for its primary functional requirement, that is, to provide fuel rod support. The present work aims to evaluate the spring characteristics of a specific spacer grid design used in a PWR fuel assembly type 16 x 16. These spring characteristics comprises the load versus deflection capability and its spring rate, which are very important, and also mandatory, to be correctly established in order to preclude spacer grid spring and fuel rod cladding fretting during operation, as well as prevent an excessive fuel rod buckling. This study includes physical tests and numerical simulation. The tests were performed on an adapted load cell mechanical device, using as a specimen a single strap of the spacer grid. Three numerical models were prepared using the Finite Element Method, with the support of the commercial code ANSYS. One model was built to validate the simulation according to the performed physical test, the others were built inserting a gradient of temperature (Beginning Of Life hot condition) and to evaluate the spacer grid spring characteristics in End Of Life condition. The obtained results from physical test and numerical model have shown a good agreement between them, therefore validating the simulation. The obtained results from numerical models make available information regarding the spacer grid design purpose, such as the behavior of the fuel rod cladding support during operation. Therewith, these evaluations could be useful to improve the spacer grid design. (author)

  20. Efficient double-emitting layer inverted organic light-emitting devices with different spacer layers

    Science.gov (United States)

    Nie, Qu-yang; Zhang, Fang-hui

    2017-09-01

    Double-emitting layer inverted organic light-emitting devices (IOLEDs) with different spacer layers were investigated, where 2,20,7,70-tetrakis(carbazol-9-yl)-9,9-spirobifluorene (CBP), 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP), 4,7-diphenyl-1,10-phenanthroline (Bphen) and 4,40,400-tris(N-carbazolyl)-triphenylamine (TCTA) were used as spacer layers, respectively, and GIr1 and R-4b were used as green and red guest phosphorescent materials, respectively. The results show that the device with BCP spacer layer has the best performance. The maximum current efficiency of the BCP spacer layer device reaches up to 24.15 cd·A-1 when the current density is 3.99 mA·cm-2, which is 1.23 times bigger than that of the CBP spacer layer device. The performance is better than that of corresponding conventional device observably. The color coordinate of the device with BCP spacer layer only changes from (0.625 1, 0.368 0) to (0.599 5, 0.392 8) when the driving voltage increases from 6 V to 10 V, so it shows good stability in color coordinate, which is due to the adoption of the co-doping evaporation method for cladding luminous layer and the effective restriction of spacer layer to carriers in emitting layer.

  1. Characterization of feed channel spacer performance using geometries obtained by X-ray computed tomography

    KAUST Repository

    Haaksman, Viktor A.

    2016-09-09

    Spiral-wound membrane modules used in water treatment for water reuse and desalination make use of spacer meshes for keeping the membrane leaves apart and for enhancing the mass transfer. Computational fluid dynamics (CFD) has gained importance in the design of new spacers with optimized hydrodynamic characteristics, but this requires a precise description of the spacer geometry. This study developed a method to obtain accurate three-dimensional (3-D) geometry representations for any given spacer design from X-ray computed tomography (CT) scans. The method revealed that the filaments of industrial spacers have a highly variable cross-section size and shape, which impact the flow characteristics in the feed channel. The pressure drop and friction factors were calculated from numerical simulations on five commercially available feed spacers used in practice. Model solutions compared well to experimental data measured using a flow cell for average velocities up to 0.2 m/s, as used in industrial reverse osmosis and nanofiltration membrane operations. A newly-proposed spacer geometry with alternating strand thickness was tested, which was found to yield a lower pressure drop while being highly efficient in converting the pumping power into membrane shear. Numerical model solutions using CFD with geometries from CT scans were closer to measurements than those obtained using the traditional circular cross-section strand simplification, indicating that CT scans are very well suitable to approximate real feed spacer geometries. By providing detailed insight on the spacer filament shape, CT scans allow better quantification of local distribution of velocity and shear, possibly leading to more accurate estimations of fouling and concentration polarization. © 2016 Elsevier B.V.

  2. Molecular phylogenetic implications in Brassica napus based on ...

    Indian Academy of Sciences (India)

    Seeds of 10 canola cultivars from different geographical regions (table 1) were planted and grown under field condi- tions. For DNA extraction, leaf materials were harvested at four to six leaf stage. Keywords. internal transcribed spacers; internal transcribed spacer sequences; canola cultivars; phylogenetic analysis; ...

  3. Increase of the electron mobility in HEMT heterostructures with composite spacers containing AlAs nanolayers

    Energy Technology Data Exchange (ETDEWEB)

    Vinichenko, A. N., E-mail: vanaxel@gmail.com; Gladkov, V. P.; Kargin, N. I.; Strikhanov, M. N.; Vasil’evskii, I. S. [National Research Nuclear University “MEPhI” (Russian Federation)

    2014-12-15

    The effect of the hybridization of quantum states on electron transport in a two-barrier quantum well δ-doped through a spacer layer at the limit of heavy doping is shown theoretically and experimentally. A method for increasing the electron mobility in the quantum well by suppressing the tunnel coupling with the donor region through the introduction of an AlAs nanobarrier into the spacer layer is proposed. It is experimentally shown that, in the samples with a shallow quantum well, the AlAs nanobarrier introduced into the spacer layer provides a larger than threefold increase in the electron mobility at low temperatures.

  4. International

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    This rubric reports on 10 short notes about international economical facts about nuclear power: Electricite de France (EdF) and its assistance and management contracts with Eastern Europe countries (Poland, Hungary, Bulgaria); Transnuclear Inc. company (a 100% Cogema daughter company) acquired the US Vectra Technologies company; the construction of the Khumo nuclear power plant in Northern Korea plays in favour of the reconciliation between Northern and Southern Korea; the delivery of two VVER 1000 Russian reactors to China; the enforcement of the cooperation agreement between Euratom and Argentina; Japan requested for the financing of a Russian fast breeder reactor; Russia has planned to sell a floating barge-type nuclear power plant to Indonesia; the control of the Swedish reactor vessels of Sydkraft AB company committed to Tractebel (Belgium); the renewal of the nuclear cooperation agreement between Swiss and USA; the call for bids from the Turkish TEAS electric power company for the building of the Akkuyu nuclear power plant answered by three candidates: Atomic Energy of Canada Limited (AECL), Westinghouse (US) and the French-German NPI company. (J.S.)

  5. Modulation of porphyrin photoluminescence by nanoscale spacers on silicon substrates

    International Nuclear Information System (INIS)

    Fang, Y.C.; Zhang, Y.; Gao, H.Y.; Chen, L.G.; Gao, B.; He, W.Z.; Meng, Q.S.; Zhang, C.; Dong, Z.C.

    2013-01-01

    We investigate photoluminescence (PL) properties of quasi-monolayered tetraphenyl porphyrin (TPP) molecules on silicon substrates modulated by three different nanoscale spacers: native oxide layer (NOL), hydrogen (H)-passivated layer, and Ag nanoparticle (AgNP) thin film, respectively. In comparison with the PL intensity from the TPP molecules on the NOL-covered silicon, the fluorescence intensity from the molecules on the AgNP-covered surface was greatly enhanced while that for the H-passivated surface was found dramatically suppressed. Time-resolved fluorescence spectra indicated shortened lifetimes for TPP molecules in both cases, but the decay kinetics is believed to be different. The suppressed emission for the H-passivated sample was attributed to the weaker decoupling effect of the monolayer of hydrogen atoms as compared to the NOL, leading to increased nonradiative decay rate; whereas the enhanced fluorescence with shortened lifetime for the AgNP-covered sample is attributed not only to the resonant excitation by local surface plasmons, but also to the increased radiative decay rate originating from the emission enhancement in plasmonic “hot-spots”.

  6. Modulation of porphyrin photoluminescence by nanoscale spacers on silicon substrates

    Energy Technology Data Exchange (ETDEWEB)

    Fang, Y.C. [Department of Vacuum Science and Engineering, Hefei University of Technology, Hefei, Anhui, 230009 (China); HFNL, University of Science and Technology of China, Hefei, Anhui, 230026 (China); Zhang, Y.; Gao, H.Y.; Chen, L.G.; Gao, B.; He, W.Z.; Meng, Q.S.; Zhang, C. [HFNL, University of Science and Technology of China, Hefei, Anhui, 230026 (China); Dong, Z.C., E-mail: zcdong@ustc.edu.cn [HFNL, University of Science and Technology of China, Hefei, Anhui, 230026 (China)

    2013-11-15

    We investigate photoluminescence (PL) properties of quasi-monolayered tetraphenyl porphyrin (TPP) molecules on silicon substrates modulated by three different nanoscale spacers: native oxide layer (NOL), hydrogen (H)-passivated layer, and Ag nanoparticle (AgNP) thin film, respectively. In comparison with the PL intensity from the TPP molecules on the NOL-covered silicon, the fluorescence intensity from the molecules on the AgNP-covered surface was greatly enhanced while that for the H-passivated surface was found dramatically suppressed. Time-resolved fluorescence spectra indicated shortened lifetimes for TPP molecules in both cases, but the decay kinetics is believed to be different. The suppressed emission for the H-passivated sample was attributed to the weaker decoupling effect of the monolayer of hydrogen atoms as compared to the NOL, leading to increased nonradiative decay rate; whereas the enhanced fluorescence with shortened lifetime for the AgNP-covered sample is attributed not only to the resonant excitation by local surface plasmons, but also to the increased radiative decay rate originating from the emission enhancement in plasmonic “hot-spots”.

  7. APPLICATIONS OF SPACERS MADE WITH DOUBLE BAR RASCHEL MACHINE

    Directory of Open Access Journals (Sweden)

    DÍAZ-GARCÍA Pablo

    2016-05-01

    Full Text Available Nowadays, textile technologies develop to adapt their different techniques for creating new products for the different sectors of application every day. Particularly, warp knitted fabrics and warp-knitting technology have applications in all different groups of technical textiles. It could be the most applied technique, the most versatile technology to develop new textile products for the new textile market. Warp knitted fabrics play the most important role among the technical textile fabrics. This technology is used in different product groups such as mobile textiles (car seat covers, dashboard cover, industrial textiles (composites, medical textiles (anti-decubitus blankets, sports textiles and foundation garments (bra cups, pads for swimwear. This study presents some examples of the application of this technology in some markets Within the market of technical textile, medical textile has an increasing relevance and knitted fabrics and knitting technology, at the same time, play a very important role in the fields of technical and medical textiles. Studies have demonstrated that knitted structures possess excellent mechanical properties and can promote more effective regenerative medicine, tissue repair, ligament, tendon cartilage, reconstruction, etc. The aim of this paper is to present different possibilities of textiles developed with this kind of structures, to present different alternatives, different examples of products obtained with this kind of textile structure combined with the correct kind of textile fiber. In this kind of technology, double-bar Raschel machines used for producing three-dimensional textiles, spacers, play an important role.

  8. The anti-tumor drug bleomycin preferentially cleaves at the transcription start sites of actively transcribed genes in human cells.

    Science.gov (United States)

    Murray, Vincent; Chen, Jon K; Galea, Anne M

    2014-04-01

    The genome-wide pattern of DNA cleavage at transcription start sites (TSSs) for the anti-tumor drug bleomycin was examined in human HeLa cells using next-generation DNA sequencing. It was found that actively transcribed genes were preferentially cleaved compared with non-transcribed genes. The 143,600 identified human TSSs were split into non-transcribed genes (82,596) and transcribed genes (61,004) for HeLa cells. These transcribed genes were further split into quintiles of 12,201 genes comprising the top 20, 20-40, 40-60, 60-80, and 80-100 % of expressed genes. The bleomycin cleavage pattern at highly transcribed gene TSSs was greatly enhanced compared with purified DNA and non-transcribed gene TSSs. The top 20 and 20-40 % quintiles had a very similar enhanced cleavage pattern, the 40-60 % quintile was intermediate, while the 60-80 and 80-100 % quintiles were close to the non-transcribed and purified DNA profiles. The pattern of bleomycin enhanced cleavage had peaks that were approximately 200 bp apart, and this indicated that bleomycin was identifying the presence of phased nucleosomes at TSSs. Hence bleomycin can be utilized to detect chromatin structures that are present at actively transcribed genes. In this study, for the first time, the pattern of DNA damage by a clinically utilized cancer chemotherapeutic agent was performed on a human genome-wide scale at the nucleotide level.

  9. The bidirectional promoter of the divergently transcribed mouse Surf-1 and Surf-2 genes.

    OpenAIRE

    Lennard, A C; Fried, M

    1991-01-01

    The ubiquitously expressed mouse Surf-1 and Surf-2 genes are divergently transcribed, and their heterogeneous start sites are separated by up to a maximum of only 73 bp. By using in vitro DNase I, dimethyl sulfate methylation, and gel retardation assays, we have identified five putative promoter control elements between and around the Surf-1 and Surf-2 start sites. The effects of each site on the regulation of Surf-1 and Surf-2 transcription have been studied in vivo, and four sites were foun...

  10. [Interspinous spacers and disc herniation. Geomorphometric and clinical study of 71 cases treated by L4-L5 microdiscectomy associated to spacer placement].

    Science.gov (United States)

    Aso Escario, José; Aso Vizán, Alberto; Martínez Quiñones, José Vicente; Consolini, Fabian; Martín Gallego, Álvaro; Arregui Calvo, Ricardo

    2015-01-01

    A controversial indication of interspinous spacers is their use as a complement to discectomy. At the present time, there is no solid clinical evidence of effectiveness of that association, which might result from variability in spacer positioning, restricting its correct biomechanical actions. In this study our goal was to identify and analyse the variability in the placement of an interspinous spacer, and to investigate its relationship with the clinical results. We performed a retrospective study on X-ray films from 71 patients suffering from disc herniation in L4-L5 who underwent surgery in our hospital, consisting of: microdiscectomy and biomed interspinous spacer implantation. The geomorphometric techniques used to analyse the data were procrustes superimposition and principal components analysis. We compared the clinical results (using the Herron and Turner scale), segmental lordosis and surgical distraction with the geomorphometric parameters. Significant morphological variability was found in the implant position showing cephalo-caudal translation and clockwise-counterclockwise rotations. This variability did not correlate with clinical results. A relationship with anatomical features (lordosis) and additional surgical distraction was identified. A different morphology of implant-segment configuration was identified in cases with recurrence of disc herniation. Geometric morphometrics allowed identifying high variability in the final placement of interspinous spacers. Nevertheless, it seems not to be related to the clinical outcome, depending rather on the degree of lordosis and distraction. Some differences in segment-implant morphology were identified in cases with recurrences. To assess the effectiveness of spacers, larger studies including morphological and clinical variables are required. Copyright © 2013 Sociedad Española de Neurocirugía. Published by Elsevier España. All rights reserved.

  11. Non linear fe analysis on the static buckling behavior of the spacer grid structures

    International Nuclear Information System (INIS)

    Song, K.N.; Yoon, K.H.

    2001-01-01

    In this study considered is the static buckling behavior of spacer grids in the fuel assembly, which are required to have a sufficient strength against an accident like earthquake. Special attention is given to the finite element modeling of the spot-welding and the constraints between the spacer strips assembled together: it is found that a proper treatment of the constraints is critical for accurate assessment of the buckling behavior including strain localization at the point of spot welding. The buckling strength of the 17 x 17 spacer grid, which is difficult to analyze due to a large number of degrees of freedom, is estimated from analysis for the smaller models 3 x 3, 5 x 5, 7 x 7, and 9 x 9 spacer grids. (authors)

  12. Impact of a Protective Vest and Spacer Garment on Exercise-Heat Strain

    National Research Council Canada - National Science Library

    Cheuvront, Samuel N; Goodman, Daniel A; Kenefick, Robert W; Montain, Scott J; Sawka, Michael N

    2008-01-01

    ...). Volunteers wore the US Army battle dress uniform (trial B), B + protective vest (trial P), and B + P + spacer garment (trial S). Biophysical clothing properties were determined and found similar to many law enforcement, industry, and sports ensembles...

  13. A simulation methodology of spacer grid residual spring deflection for predictive and interpretative purposes

    International Nuclear Information System (INIS)

    Kim, K. T.; Kim, H. K.; Yoon, K. H.

    1994-01-01

    The in-reactor fuel rod support conditions against the fretting wear-induced damage can be evaluated by spacer grid residual spring deflection. In order to predict the spacer grid residual spring deflection as a function of burnup for various spring designs, a simulation methodology of spacer grid residual spring deflection has been developed and implemented in the GRIDFORCE program. The simulation methodology takes into account cladding creep rate, initial spring deflection, initial spring force, and spring force relaxation rate as the key parameters affecting the residual spring deflection. The simulation methodology developed in this study can be utilized as an effective tool in evaluating the capability of a newly designed spacer grid spring to prevent the fretting wear-induced damage

  14. The effect of endoskeleton on antibiotic impregnated cement spacer for treating deep hip infection

    Directory of Open Access Journals (Sweden)

    Hsu Wei-Hsiu

    2011-01-01

    Full Text Available Abstract Backgrounds A two-stage revision arthroplasty was suggested optimal treatment for deep infections in hip joint. The effect of endoskeleton of cement spacers on the interim function and infection control remains unclear. Methods From Jan. 2004 to Dec. 2007, we collected a prospective cohort of consecutive 34 patients who treated with two-stage revision total hip arthroplasty for deep infection of hip joint. In group 1, fifteen patients were treated by a novel design augmented with hip compression screw while nineteen patients were treated by traditional design in group 2. Results No fracture of cement spacer occurred in group 1 while 6 cases developed spacer failure in group 2. (p Conclusions Patients being treated for deep infection of hip joint using cement spacer augmented with stronger endoskeleton have lower pain levels and better joint function between stages.

  15. Spacer geometry and particle deposition in spiral wound membrane feed channels

    KAUST Repository

    Radu, A.I.

    2014-11-01

    Deposition of microspheres mimicking bacterial cells was studied experimentally and with a numerical model in feed spacer membrane channels, as used in spiral wound nanofiltration (NF) and reverse osmosis (RO) membrane systems. In-situ microscopic observations in membrane fouling simulators revealed formation of specific particle deposition patterns for different diamond and ladder feed spacer orientations. A three-dimensional numerical model combining fluid flow with a Lagrangian approach for particle trajectory calculations could describe very well the in-situ observations on particle deposition in flow cells. Feed spacer geometry, positioning and cross-flow velocity sensitively influenced the particle transport and deposition patterns. The deposition patterns were not influenced by permeate production. This combined experimental-modeling approach could be used for feed spacer geometry optimization studies for reduced (bio)fouling. © 2014 Elsevier Ltd.

  16. A Facile Technique to Make Articulating Spacers for Infected Total Knee Arthroplasty

    Directory of Open Access Journals (Sweden)

    Yu-Ping Su

    2009-03-01

    Conclusion: Treating infected total knee arthroplasty with these self-made articulating spacers eradicates infection effectively, improves the life quality before reimplantation and provides good final results without significant complications.

  17. Computer-Aided Design Method of Warp-Knitted Jacquard Spacer Fabrics

    Directory of Open Access Journals (Sweden)

    Li Xinxin

    2016-06-01

    Full Text Available Based on a further study on knitting and jacquard principles, this paper presents a mathematical design model to make computer-aided design of warp-knitted jacquard spacer fabrics more efficient. The mathematical model with matrix method employs three essential elements of chain notation, threading and Jacquard designing. With this model, the processing to design warp-knitted jacquard spacer fabrics with CAD software is also introduced. In this study, the sports shoes which have separated functional areas according to the feet structure and characteristics of movement are analysed. The results show the different patterns on Jacquard spacer fabrics that are seamlessly stitched with jacquard technics. The computer-aided design method of warp-knitted jacquard spacer fabrics is efficient and simple.

  18. CRISPR Spacer Arrays for Detection of Viral Signatures from Acidic Hot Springs

    Science.gov (United States)

    Snyder, J. C.; Bateson, M. M.; Suciu, D.; Young, M. J.

    2010-04-01

    Viruses are the most abundant life-like entities on the planet Earth. Using CRISPR spacer sequences, we have developed a microarray-based approach to detecting viral signatures in the acidic hot springs of Yellowstone.

  19. Annular flow in rod-bundle: Effect of spacer on disturbance waves

    Energy Technology Data Exchange (ETDEWEB)

    Pham, Son H.; Kunugi, Tomoaki

    2016-08-01

    A high-speed camera technique is used to study the effect of spacers on the disturbance waves present in annular two-phase flow within a rod-bundle geometry. Images obtained using a backlight configuration to visualize the spacer-wave interactions at the micro-scale resolution (in time and space) are discussed. This paper also presents additional images obtained using a reflected light configuration which provides new observations of the disturbance waves. These images show the separation effect caused by the spacer on the liquid film in which the size of generated liquid droplets can be controlled by the gas superficial velocity. Furthermore, the data confirm that the spacer breaks the circumferential coherent structures of the waves.

  20. Transcriptome map of plant mitochondria reveals islands of unexpected transcribed regions

    Directory of Open Access Journals (Sweden)

    Yokoyama Koji

    2011-06-01

    Full Text Available Abstract Background Plant mitochondria contain a relatively large amount of genetic information, suggesting that their functional regulation may not be as straightforward as that of metazoans. We used a genomic tiling array to draw a transcriptomic atlas of Oryza sativa japonica (rice mitochondria, which was predicted to be approximately 490-kb long. Results Whereas statistical analysis verified the transcription of all previously known functional genes such as the ones related to oxidative phosphorylation, a similar extent of RNA expression was frequently observed in the inter-genic regions where none of the previously annotated genes are located. The newly identified open reading frames (ORFs predicted in these transcribed inter-genic regions were generally not conserved among flowering plant species, suggesting that these ORFs did not play a role in mitochondrial principal functions. We also identified two partial fragments of retrotransposon sequences as being transcribed in rice mitochondria. Conclusion The present study indicated the previously unexpected complexity of plant mitochondrial RNA metabolism. Our transcriptomic data (Oryza sativa Mitochondrial rna Expression Server: OsMES is publicly accessible at [http://bioinf.mind.meiji.ac.jp/cgi-bin/gbrowse/OsMes/#search].

  1. Potent microRNA suppression by RNA Pol II-transcribed ‘Tough Decoy’ inhibitors

    Science.gov (United States)

    Bak, Rasmus O.; Hollensen, Anne Kruse; Primo, Maria Nascimento; Sørensen, Camilla Darum; Mikkelsen, Jacob Giehm

    2013-01-01

    MicroRNAs (miRNAs) are key regulators of gene expression and modulators of diverse biological pathways. Analyses of miRNA function as well as therapeutic managing of miRNAs rely on cellular administration of miRNA inhibitors which may be achieved by the use of viral vehicles. This study explores the miRNA-suppressive capacity of inhibitors expressed intracellularly from lentivirus-derived gene vectors. Superior activity of two decoy-type inhibitors, a “Bulged Sponge” with eight miRNA recognition sites and a hairpin-shaped “Tough Decoy” containing two miRNA recognition sites, is demonstrated in a side-by-side comparison of seven types of miRNA inhibitors transcribed as short RNAs from an RNA Pol III promoter. We find that lentiviral vectors expressing Tough Decoy inhibitors are less vulnerable than Bulged Sponge-encoding vectors to targeting by the cognate miRNA and less prone, therefore, to reductions in transfer efficiency. Importantly, it is demonstrated that Tough Decoy inhibitors retain their miRNA suppression capacity in the context of longer RNA transcripts expressed from an RNA Pol II promoter. Such RNA Pol II-transcribed Tough Decoy inhibitors are new tools in managing of miRNAs and may have potential for temporal and spatial regulation of miRNA activity as well as for therapeutic targeting of miRNAs that are aberrantly expressed in human disease. PMID:23249752

  2. Measuring Hematocrit in Mice Injected with In Vitro-Transcribed Erythropoietin mRNA.

    Science.gov (United States)

    Mahiny, Azita Josefine; Karikó, Katalin

    2016-01-01

    In vitro-transcribed (IVT) mRNA encoding therapeutic protein has the potential to treat a variety of diseases by serving as template for translation in the patient. To optimize conditions for such therapy, reporter protein-encoding mRNAs are usually used. One preferred reporter is erythropoietin (EPO), which stimulates erythropoiesis and leads to an increase in hematocrit. Measurement of hematocrit is a fast and reliable method to determine the potency of the in vitro-transcribed EPO mRNA. However, frequent blood draw from mice can increase hematocrit due to blood loss. Therefore, instead of using conventional hematocrit capillary tubes, we adapted glass microcapillaries for hematocrit measurement. Daily monitoring of mice can be accomplished by drawing less than 20 μL of blood, thus avoiding blood loss-related hematocrit increase. Due to the small volume of the withdrawn blood the hematocrit remains the same for mice injected with control mRNA, whereas significant hematocrit increase is measured between day 4 and 20 postinjection for those injected with pseudouridine-modified EPO mRNA. Following hematocrit measurement the microcapillaries are snapped easily to recover plasma for further analyses, including EPO measurement by ELISA.

  3. Feasibility Study of Interactive Game Technologies to Improve Experience with Inhaler Spacer Devices in Young Children

    OpenAIRE

    Aslam, Tariq; Shakir, Savana; Murray, Clare

    2016-01-01

    IntroductionThe correct use of inhaler devices with facemasks and spacers in young children can be difficult for both children and parents, resulting in distress for both, poor adherence and ineffective drug delivery. The aim of this study was to develop and assess the utility and impact of an interactive electronic game designed to improve the experience of spacer devices in young asthmatic children.MethodsThe Respiratory Aid For Inhaler (RAFIhaler) technology consists of a smartphone mounte...

  4. Biofouling patterns in spacer filled channels: High resolution imaging for characterization of heterogeneous biofilms

    KAUST Repository

    Staal, Marc

    2017-08-15

    Biofilms develop in heterogeneous patterns at a µm scale up to a cm scale, and patterns become more pronounced when biofilms develop under complex hydrodynamic flow regimes. Spatially heterogeneous biofilms are especially known in spiral wound reverse osmosis (RO) and nanofiltration (NF) membrane filtration systems used for desalination and wastewater reuse to produce high quality (drinking) water. These spiral wound membrane modules contain mesh-like spacer structures used to create an intermembrane space and improve water mixing. Spacers create inhomogeneous water flow patterns resulting in zones favouring biofilm growth, possibly leading to biofouling thus hampering water production. Oxygen sensing planar optodes were used to visualize variations in oxygen decrease rates (ODR). ODR is an indication of biofilm activity. In this study, ODR images of multiple repetitive spacer areas in a membrane fouling simulator were averaged to produce high resolution, low noise ODR images. Averaging 40 individual spacer areas improved the ODR distribution image significantly and allowed comparison of biofilm patterning over a spacer structure at different positions in an RO filter. This method clearly showed that most active biofilm accumulated on and in direct vicinity of the spacer. The averaging method was also used to calculate the deviation of ODR patterning from individual spacer areas to the average ODR pattern, proposing a new approach to determine biofilm spatial heterogeneity. This study showed that the averaging method can be applied and that the improved, averaged ODR images can be used as an analytical, in-situ, non-destructive method to assess and quantify the effect of membrane installation operational parameters or different spacer geometries on biofilm development in spiral wound membrane systems characterized by complex hydrodynamic conditions.

  5. Testing for hydraulic characteristics of HIPER spacer grids

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyung Kyu; Lee, Kang Hee; Kang, Heung Seok; Lee, Young Ho; Kim, Jae Yong; Yoon, Kyung Ho

    2009-12-15

    The Korea Nuclear Fuel Co. requested the high frequency flow-induced vibration and pressure drop tests of top, mid, IFM, bottom grid candidates of HIPER and protective grid candidates of a commercial fuel. The following results were obtained for each test. 1) High frequency flow-induced vibration of HIPER spacer grids Measured maximum vibration amplitude of the HIPER mid grid was under 21 mm/s at lower region of the grid's center spring. The peak vibration amplitudes of the upper, IFM, and bottom grids were 5{approx}10 times less than that of the mid grid. Peak frequency associated with the peak amplitude have gradually increased with the flow velocity. This suggested that a high frequency vibration of grid was originated from the vortex shedding due to the thickness edge of grid strap. 2) Hydraulic vibration test of protective grids for a commercial fuel Peak vibration amplitudes of 16x16 type fuel protective grids were above 200 mm/s at the frontal direction of HyGrid 4. There might be a strong resonance near at the measurement point of the grid. Peak vibration amplitude of 17x17 type fuel were measured by 46.6 mm/s, 376.5 mm/s for the ACE7 and RFA protective grids in order. Peak frequency also had increasing trend with the bundle flow velocity. Measured pressure drops of 16x16 type fuel protective grids were comparatively higher than those of the reference fuel protective grids

  6. 5 X 5 rod bundle flow field measurements downstream a PWR spacer grid

    Energy Technology Data Exchange (ETDEWEB)

    Castro, Higor F.P.; Silva, Vitor V A.; Santos, André A.C.; Veloso, Maria A.F., E-mail: higorfabiano@gmail.com, E-mail: mdora@nuclear.ufmg.br, E-mail: vitors@cdtn.br, E-mail: aacs@cdtn.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil); Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2017-07-01

    The spacer grids are structures present in nuclear fuel assembly of Pressurized Water Reactors (PWR). They play an important structural role and also assist in heat removal through the assembly by promoting increased turbulence of the flow. Understanding the flow dynamics downstream the spacer grid is paramount for fuel element design and analysis. This paper presents water flow velocity profiles measurements downstream a spacer grid in a 5 x 5 rod bundle test rig with the objective of highlighting important fluid dynamic behavior near the grid and supplying data for CFD simulation validation. These velocity profiles were obtained at two different heights downstream the spacer grid using a LDV (Laser Doppler Velocimetry) through the top of test rig. The turbulence intensities and patterns of the swirl and cross flow were evaluated. The tests were conducted for Reynolds numbers ranging from 1.8 x 10{sup 4} to 5.4 x 10{sup 4}. This experimental research was carried out in thermo-hydraulics laboratory of Nuclear Technology Development Center – CDTN. Results show great repeatability and low uncertainties (< 1.24 %). Details of the flow field show how the mixture and turbulence induced by the spacer grid quickly decays downstream the spacer grid. It is shown that the developed methodology can supply high resolution low uncertainty results that can be used for validation of CFD simulations. (author)

  7. 5 X 5 rod bundle flow field measurements downstream a PWR spacer grid

    International Nuclear Information System (INIS)

    Castro, Higor F.P.; Silva, Vitor V A.; Santos, André A.C.; Veloso, Maria A.F.

    2017-01-01

    The spacer grids are structures present in nuclear fuel assembly of Pressurized Water Reactors (PWR). They play an important structural role and also assist in heat removal through the assembly by promoting increased turbulence of the flow. Understanding the flow dynamics downstream the spacer grid is paramount for fuel element design and analysis. This paper presents water flow velocity profiles measurements downstream a spacer grid in a 5 x 5 rod bundle test rig with the objective of highlighting important fluid dynamic behavior near the grid and supplying data for CFD simulation validation. These velocity profiles were obtained at two different heights downstream the spacer grid using a LDV (Laser Doppler Velocimetry) through the top of test rig. The turbulence intensities and patterns of the swirl and cross flow were evaluated. The tests were conducted for Reynolds numbers ranging from 1.8 x 10 4 to 5.4 x 10 4 . This experimental research was carried out in thermo-hydraulics laboratory of Nuclear Technology Development Center – CDTN. Results show great repeatability and low uncertainties (< 1.24 %). Details of the flow field show how the mixture and turbulence induced by the spacer grid quickly decays downstream the spacer grid. It is shown that the developed methodology can supply high resolution low uncertainty results that can be used for validation of CFD simulations. (author)

  8. Determining factors of aerosol deposition for four pMDI-spacer combinations in an infant upper airway model.

    Science.gov (United States)

    Janssens, Hettie M; Krijgsman, Arno; Verbraak, Ton F M; Hop, Wim C J; de Jongste, Johan C; Tiddens, Harm A W M

    2004-01-01

    The aim of this study was to measure and compare the influence of tidal volume (Vt) respiratory rate (RR) and pMDI/spacer combination on aerosol deposition of 4 pMDI/spacer combinations, which are used for infants. An anatomically correct upper airway model of a 9-month-old infant was connected to a breathing simulator. Sinusoidal breathing patterns were simulated with; duty cycle T(i)/T(tot) = 0.42, Vt: 25, 50, 75, 100, 150, 200 ml (RR: 30 breaths/min); and RR: 20, 30, 42, 60, 78 breaths/min (Vt: 100 mL). pMDI/Spacers tested were: budesonide 200 microg/Nebuchamber, fluticasone 125 microg/Babyhaler and both budesonide and fluticasone with Aerochamber. Plastic spacers were detergent coated to reduce electrostatic charge. Spacer-output and lung dose were measured by a filter positioned between spacer and facemask or between model and breathing simulator. Particle size distribution of lung dose was assessed with an impactor during simulated breathing. Spacer-output was significantly positively correlated with Vt for all pMDI/spacers (all R > 0.77, p particles particles in the upper airways. Deposition of particles <2.1 microm is relatively flow independent. When electrostatic charge of spacers is reduced, lung dose is pMDI dependent and spacer independent.

  9. Predicting the impact of feed spacer modification on biofouling by hydraulic characterization and biofouling studies in membrane fouling simulators

    KAUST Repository

    Siddiqui, Amber

    2016-12-22

    Feed spacers are an essential part of spiral-wound reverse osmosis (RO) and nanofiltration (NF) membrane modules. Geometric modification of feed spacers is a potential option to reduce the impact of biofouling on the performance of membrane systems. The objective of this study was to evaluate the biofouling potential of two commercially available reference feed spacers and four modified feed spacers. The spacers were compared on hydraulic characterization and in biofouling studies with membrane fouling simulators (MFSs). The virgin feed spacer was characterized hydraulically by their resistance, measured in terms of feed channel pressure drop, performed by operating MFSs at varying feed water flow rates. Short-term (9 days) biofouling studies were carried out with nutrient dosage to the MFS feed water to accelerate the biofouling rate. Long-term (96 days) biofouling studies were done without nutrient dosage to the MFS feed water. Feed channel pressure drop was monitored and accumulation of active biomass was quantified by adenosine tri phosphate (ATP) determination. The six feed spacers were ranked on pressure drop (hydraulic characterization) and on biofouling impact (biofouling studies). Significantly different trends in hydraulic resistance and biofouling impact for the six feed spacers were observed. The same ranking for biofouling impact on the feed spacers was found for the (i) short-term biofouling study with nutrient dosage and the (ii) long-term biofouling study without nutrient dosage. The ranking for hydraulic resistance for six virgin feed spacers differed significantly from the ranking of the biofouling impact, indicating that hydraulic resistance of clean feed spacers does not predict the hydraulic resistance of biofouled feed spacers. Better geometric design of feed spacers can be a suitable approach to minimize impact of biofouling in spiral wound membrane systems.

  10. Transcribed enhancers lead waves of coordinated transcription in transitioning mammalian cells

    Science.gov (United States)

    Arner, Erik; Daub, Carsten O.; Vitting-Seerup, Kristoffer; Andersson, Robin; Lilje, Berit; Drabløs, Finn; Lennartsson, Andreas; Rönnerblad, Michelle; Hrydziuszko, Olga; Vitezic, Morana; Freeman, Tom C.; Alhendi, Ahmad M. N.; Arner, Peter; Axton, Richard; Baillie, J. Kenneth; Beckhouse, Anthony; Bodega, Beatrice; Briggs, James; Brombacher, Frank; Davis, Margaret; Detmar, Michael; Ehrlund, Anna; Endoh, Mitsuhiro; Eslami, Afsaneh; Fagiolini, Michela; Fairbairn, Lynsey; Faulkner, Geoffrey J.; Ferrai, Carmelo; Fisher, Malcolm E.; Forrester, Lesley; Goldowitz, Daniel; Guler, Reto; Ha, Thomas; Hara, Mitsuko; Herlyn, Meenhard; Ikawa, Tomokatsu; Kai, Chieko; Kawamoto, Hiroshi; Khachigian, Levon M.; Klinken, S. Peter; Kojima, Soichi; Koseki, Haruhiko; Klein, Sarah; Mejhert, Niklas; Miyaguchi, Ken; Mizuno, Yosuke; Morimoto, Mitsuru; Morris, Kelly J.; Mummery, Christine; Nakachi, Yutaka; Ogishima, Soichi; Okada-Hatakeyama, Mariko; Okazaki, Yasushi; Orlando, Valerio; Ovchinnikov, Dmitry; Passier, Robert; Patrikakis, Margaret; Pombo, Ana; Qin, Xian-Yang; Roy, Sugata; Sato, Hiroki; Savvi, Suzana; Saxena, Alka; Schwegmann, Anita; Sugiyama, Daisuke; Swoboda, Rolf; Tanaka, Hiroshi; Tomoiu, Andru; Winteringham, Louise N.; Wolvetang, Ernst; Yanagi-Mizuochi, Chiyo; Yoneda, Misako; Zabierowski, Susan; Zhang, Peter; Abugessaisa, Imad; Bertin, Nicolas; Diehl, Alexander D.; Fukuda, Shiro; Furuno, Masaaki; Harshbarger, Jayson; Hasegawa, Akira; Hori, Fumi; Ishikawa-Kato, Sachi; Ishizu, Yuri; Itoh, Masayoshi; Kawashima, Tsugumi; Kojima, Miki; Kondo, Naoto; Lizio, Marina; Meehan, Terrence F.; Mungall, Christopher J.; Murata, Mitsuyoshi; Nishiyori-Sueki, Hiromi; Sahin, Serkan; Nagao-Sato, Sayaka; Severin, Jessica; de Hoon, Michiel J. L.; Kawai, Jun; Kasukawa, Takeya; Lassmann, Timo; Suzuki, Harukazu; Kawaji, Hideya; Summers, Kim M.; Wells, Christine; Hume, David A.; Forrest, Alistair R. R.; Sandelin, Albin; Carninci, Piero; Hayashizaki, Yoshihide

    2015-01-01

    Although it is generally accepted that cellular differentiation requires changes to transcriptional networks, dynamic regulation of promoters and enhancers at specific sets of genes has not been previously studied en masse. Exploiting the fact that active promoters and enhancers are transcribed, we simultaneously measured their activity in 19 human and 14 mouse time courses covering a wide range of cell types and biological stimuli. Enhancer RNAs, then messenger RNAs encoding transcription factors, dominated the earliest responses. Binding sites for key lineage transcription factors were simultaneously overrepresented in enhancers and promoters active in each cellular system. Our data support a highly generalizable model in which enhancer transcription is the earliest event in successive waves of transcriptional change during cellular differentiation or activation. PMID:25678556

  11. EWS and FUS bind a subset of transcribed genes encoding proteins enriched in RNA regulatory functions

    DEFF Research Database (Denmark)

    Luo, Yonglun; Friis, Jenny Blechingberg; Fernandes, Ana Miguel

    2015-01-01

    Background FUS (TLS) and EWS (EWSR1) belong to the FET-protein family of RNA and DNA binding proteins. FUS and EWS are structurally and functionally related and participate in transcriptional regulation and RNA processing. FUS and EWS are identified in translocation generated cancer fusion proteins...... and involved in the human neurological diseases amyotrophic lateral sclerosis and fronto-temporal lobar degeneration. Results To determine the gene regulatory functions of FUS and EWS at the level of chromatin, we have performed chromatin immunoprecipitation followed by next generation sequencing (Ch......IP-seq). Our results show that FUS and EWS bind to a subset of actively transcribed genes, that binding often is downstream the poly(A)-signal, and that binding overlaps with RNA polymerase II. Functional examinations of selected target genes identified that FUS and EWS can regulate gene expression...

  12. A functional analysis of the spacer of V(DJ recombination signal sequences.

    Directory of Open Access Journals (Sweden)

    Alfred Ian Lee

    2003-10-01

    Full Text Available During lymphocyte development, V(DJ recombination assembles antigen receptor genes from component V, D, and J gene segments. These gene segments are flanked by a recombination signal sequence (RSS, which serves as the binding site for the recombination machinery. The murine Jbeta2.6 gene segment is a recombinationally inactive pseudogene, but examination of its RSS reveals no obvious reason for its failure to recombine. Mutagenesis of the Jbeta2.6 RSS demonstrates that the sequences of the heptamer, nonamer, and spacer are all important. Strikingly, changes solely in the spacer sequence can result in dramatic differences in the level of recombination. The subsequent analysis of a library of more than 4,000 spacer variants revealed that spacer residues of particular functional importance are correlated with their degree of conservation. Biochemical assays indicate distinct cooperation between the spacer and heptamer/nonamer along each step of the reaction pathway. The results suggest that the spacer serves not only to ensure the appropriate distance between the heptamer and nonamer but also regulates RSS activity by providing additional RAG:RSS interaction surfaces. We conclude that while RSSs are defined by a "digital" requirement for absolutely conserved nucleotides, the quality of RSS function is determined in an "analog" manner by numerous complex interactions between the RAG proteins and the less-well conserved nucleotides in the heptamer, the nonamer, and, importantly, the spacer. Those modulatory effects are accurately predicted by a new computational algorithm for "RSS information content." The interplay between such binary and multiplicative modes of interactions provides a general model for analyzing protein-DNA interactions in various biological systems.

  13. Experimental investigations of turbulent flows in rod bundles with and without spacer grids

    International Nuclear Information System (INIS)

    Trippe, G.

    1979-07-01

    In the thermofluiddynamic design of liquid metal cooled reactor fuel elements the lack of experimentally confirmed knowledge of the three-dimensional flow events in rod bundles provided with spacer grids has appeared as a significant problem. To close this gap of knowledge, detailed measurements of the local velocities were made on a 19-rod bundle model. The Pitot method of differential pressure measurements was used as the measuring system. In the first part of the work the fully developed flow regime not influenced by spacers was investigated. A simple relation was derived for distributing the mass flow among the subchannels of a rod bundle; it is but slightly dependent on the Reynolds number. This relation allows a quick, coarse calculation of the distribution of the undisturbed, fully developed mass flow in bundles with similar geometries. By evaluation of further experiments known from the literature, empirical relationships were found for the local velocity distribution within the subchannels of such bundles. In the second part the effect of grid shaped spacers was investigated. The three-dimensional flow events caused by the spacers were completely recorded and interpreted physically. The deeper understanding of these flow processes can now serve to improve the model concept used in the present design computer programs. Single results of the investigations which take primary importance are the quantitative relations existing between the changes of mass flow in the bundle boundary zone, caused by a spacer, and the geometry of this spacer. The transferability to other bundle geometries was discussed and delimited. Moreover, it was shown that the mass flow in the bundle boundary zone can be successively reduced by spacers placed one behind the other in the bundle. A noticeable dependence of flow events on the Reynolds number was not found for the range relevant in practical application (30.000 [de

  14. Hydrogel spacer distribution within the perirectal space in patients undergoing radiotherapy for prostate cancer: Impact of spacer symmetry on rectal dose reduction and the clinical consequences of hydrogel infiltration into the rectal wall.

    Science.gov (United States)

    Fischer-Valuck, Benjamin W; Chundury, Anupama; Gay, Hiram; Bosch, Walter; Michalski, Jeff

    Hydrogel prostate-rectum spacers, biomaterials placed between the prostate and rectum, continue to gain interest as a method to reduce or limit rectal dose during dose escalated prostate cancer radiation therapy. Because the spacer is initially injected into the perirectal space as a liquid, the final distribution can vary. The purpose of this study was to evaluate hydrogel spacer (SpaceOAR system) implantation and distribution from a recent prospective randomized control trial and correlate spacer symmetry with rectal dose reduction as well as rectal wall infiltration (RWI) to acute and late toxicity. T2-weighted magnetic resonance imaging sets of 149 patients enrolled in a prospective clinical trial who received transperineal spacer injection were assessed for hydrogel spacer midline symmetry and RWI using a semiqualitative scoring system. Symmetry was then correlated to rectal dose reduction using a Student t test (1-tailed, paired), whereas a Fisher exact test was used to correlate RWI with acute and late rectal toxicity. All patients had control treatment plans created before spacer injection. Hydrogel spacer was symmetrically placed at midline for 71 (47.7%) patients at the prostate midgland as well as 1 cm superior and inferior to midgland. The remaining 78 (50.9%) patients had some level of asymmetry, with only 2 (1.3%) having far lateral distribution (ie, >2 cm) of hydrogel spacer. As the hydrogel spacer became more asymmetric, the level of rectal dose reduction relative to their control plans decreased. However, all but the most asymmetrical 1.3% had significant rectal dose reduction (P < .05). Rectal wall hydrogel spacer infiltration was seen in 9 (6.0%) patients. There was no correlation between RWI and procedure-related adverse events or acute/late rectal toxicity. Significant reduction of rectal dose can still be achieved even in the setting of asymmetric hydrogel spacer placement. RWI does not correlate with patient complications. Copyright © 2016

  15. Knitting Technologies And Tensile Properties Of A Novel Curved Flat-Knitted Three-Dimensional Spacer Fabrics

    Directory of Open Access Journals (Sweden)

    Li Xiaoying

    2015-09-01

    Full Text Available This paper introduces a knitting technique for making innovative curved three-dimensional (3D spacer fabrics by the computer flat-knitting machine. During manufacturing, a number of reinforcement yarns made of aramid fibres are inserted into 3D spacer fabrics along the weft direction to enhance the fabric tensile properties. Curved, flat-knitted 3D spacer fabrics with different angles (in the warp direction were also developed. Tensile tests were carried out in the weft and warp directions for the two spacer fabrics (with and without reinforcement yarns, and their stress–strain curves were compared. The results showed that the reinforcement yarns can reduce the fabric deformation and improve tensile stress and dimensional stability of 3D spacer fabrics. This research can help the further study of 3D spacer fabric when applied to composites.

  16. A Study of Neutronics Effects of the Spacer Grids in a Typical PWR via Monte Carlo Calculation

    OpenAIRE

    Xuan Bach Tran; Nam Zin Cho

    2016-01-01

    Spacer grids play an important role in maintaining the proper form of the fuel assembly structure and ensuring the safety of reactor core design. This study applies the Monte Carlo method to the analysis of the neutronics effects of spacer grids in a typical pressurized water reactor (PWR). The core problem used to analyze the neutronics effects of spacer grids is a modified version of Korea Advanced Institute of Science and Technology benchmark problem 1B, based on an Advanced Power Reactor ...

  17. Effect of different commercial feed spacers on biofouling of reverse osmosis membrane systems: A numerical study

    KAUST Repository

    Bucs, Szilard

    2014-06-01

    Feed spacers and hydrodynamics have been found relevant for the impact of biofouling on performance in reverse osmosis (RO) and nanofiltration (NF) membrane systems.The objectives of this study on biofouling development were to determine the impact of (i) linear flow velocity and bacterial cell load, (ii) biomass location and (iii) various feed spacer geometries as applied in practice as well as a modified geometry spacer.A three-dimensional mathematical model for biofouling of feed spacer channels including hydrodynamics, solute mass transport and biofilm formation was developed in COMSOL Multiphysics and MATLAB software.Results of this study indicate that the feed channel pressure drop increase caused by biofilm formation can be reduced by using thicker and/or modified feed spacer geometry and/or a lower flow rate in the feed channel. The increase of feed channel pressure drop by biomass accumulation is shown to be strongly influenced by the location of biomass. Results of numerical simulations are in satisfactory agreement with experimental data, indicating that this micro-scale mechanistic model is representative for practice. The developed model can help to understand better the biofouling process of spiral-wound RO and NF membrane systems and to develop strategies to reduce and control biofouling. © 2013 Elsevier B.V.

  18. Detection and characterization of spacer integration intermediates in type I-E CRISPR-Cas system.

    Science.gov (United States)

    Arslan, Zihni; Hermanns, Veronica; Wurm, Reinhild; Wagner, Rolf; Pul, Ümit

    2014-07-01

    The adaptation against foreign nucleic acids by the CRISPR-Cas system (Clustered Regularly Interspaced Short Palindromic Repeats and CRISPR-associated proteins) depends on the insertion of foreign nucleic acid-derived sequences into the CRISPR array as novel spacers by still unknown mechanism. We identified and characterized in Escherichia coli intermediate states of spacer integration and mapped the integration site at the chromosomal CRISPR array in vivo. The results show that the insertion of new spacers occurs by site-specific nicking at both strands of the leader proximal repeat in a staggered way and is accompanied by joining of the resulting 5'-ends of the repeat strands with the 3'-ends of the incoming spacer. This concerted cleavage-ligation reaction depends on the metal-binding center of Cas1 protein and requires the presence of Cas2. By acquisition assays using plasmid-located CRISPR array with mutated repeat sequences, we demonstrate that the primary sequence of the first repeat is crucial for cleavage of the CRISPR array and the ligation of new spacer DNA. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.

  19. Shape optimization of spacer grids / development of a FE model their buckling analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kwak, B. M.; Im, S. Y.; Chang, J. H.; Jang, I. G.; Choi, K. H. [Korea Advanced Institute of Science and Technology, Taejon (Korea)

    2000-04-01

    An optimal design method is adopted for spacer grids. For contact analysis, a typical cell out of repeated pattern in the assembly is modeled. A commercial code, ABAQUS, is used for detailed analysis of frictional contact. For the optimization, design variables are taken from geometric parameters and several objectives are considered. The optimized shapes and resulting performances are discussed and shown satisfactory. This method is illustrated as a good design tool for structures that has complex behavior due to friction and wear. In this study considered is the buckling of spacer grids in the nuclear fuel assembly, which are required to have a sufficient strength against an accident like earthquake. Special attention is given to the modeling of the spot-welding and the constraints between the unit spacers assembled together : it is found that a proper treatment of the constraints is critical for accurate assessment of the buckling behavior including strain localization at the point of spot welding. The buckling strength of the 17 x 17 spacer grid, which is difficult to analyze due to a large number of degrees of freedom, is obtained from analysis for the smaller models 3 x 3, 5 x 5, 7 x 7 and 9 x 9 spacer grids. 9 refs., 36 figs., 8 tabs. (Author)

  20. Air-water flooding in multirod channels: effects of spacer grids and blockages

    International Nuclear Information System (INIS)

    Cha, Jong Hee; Jun, Hyung Gil

    1993-01-01

    This paper presents the experimental results on flooding of countercurrent flow in vertical multirod channels, which consists of falling water film and upward air flow. In particular, the effects of spacer grids, with and without mixing vane, and of blockage in the multirod bundle on the behaviour of flooding were investigated. The 5 x 5 zircaloy tube bundle was used for the test section. The comparison of previous analytical models and empirical correlations with present data on flooding showed that the existing models and correlations predict much higher flooding curves. The spacer grid causes the lower flooding air flow rate to compare with the bare rod bundle. However, the mixing spacer grids need a higher flooding air flow rate for a constant liquid flow rate than the spacer grids without mixing vanes. The bundle containing blockages has the highest flooding air flow rate among the bundles with spacer grids and blokages. Empirical flooding correlations for the three types of test section have been made. (Author)

  1. Simulation study of transfer characteristics for spacer-filled membrane distillation desalination modules

    International Nuclear Information System (INIS)

    Chang, Hsuan; Hsu, Jian-An; Chang, Cheng-Liang; Ho, Chii-Dong; Cheng, Tung-Wen

    2017-01-01

    Highlights: • A 3D CFD model takes in transmembrane heat and mass transfer developed. • DCMD modules using spacer-filled and empty channels for desalination simulated. • Fluid flow, heat transfer and mass transfer profiles revealed. • Correlations of friction factor and Nusselt number developed. - Abstract: Membrane distillation (MD) is an emerging and promising membrane separation process, which can directly utilize renewable thermal energy or low-grade waste heat, for applications in water or wastewater treatment and food industry. However, a major drawback of MD process is its low energy efficiency. Spacer is the most suggested and studied eddy promoter to enhance the heat and mass transfer, which further improves both the separation and the energy utilization performance, of MD processes. This paper presents the results of a 3D computational fluid dynamics (CFD) simulation of DCMD (direct contact membrane distillation) modules using channels with and without spacers for desalination application. The model employs permeable wall boundary condition to take into account the transmembrane heat and mass transfer and simulates the entire module length. The simulation reveals similar fluctuating distributions of temperature polarization coefficient, transmembrane heat and mass fluxes as well as the shear stress on the membrane surface along the entire module length. Correlations have been developed for friction factor and average Nusselt number. These correlations are useful for the analysis and design of DCMD modules. The extent of heat transfer enhancement by spacers depends on the geometry of spacers and the Reynolds number of fluid.

  2. Using cathode spacers to minimize reactor size in air cathode microbial fuel cells

    KAUST Repository

    Yang, Qiao

    2012-04-01

    Scaling up microbial fuel cells (MFCs) will require more compact reactor designs. Spacers can be used to minimize the reactor size without adversely affecting performance. A single 1.5mm expanded plastic spacer (S1.5) produced a maximum power density (973±26mWm -2) that was similar to that of an MFC with the cathode exposed directly to air (no spacer). However, a very thin spacer (1.3mm) reduced power by 33%. Completely covering the air cathode with a solid plate did not eliminate power generation, indicating oxygen leakage into the reactor. The S1.5 spacer slightly increased columbic efficiencies (from 20% to 24%) as a result of reduced oxygen transfer into the system. Based on operating conditions (1000ς, CE=20%), it was estimated that 0.9Lh -1 of air would be needed for 1m 2 of cathode area suggesting active air flow may be needed for larger scale MFCs. © 2012 Elsevier Ltd.

  3. Tidying up international nucleotide sequence databases: ecological, geographical and sequence quality annotation of its sequences of mycorrhizal fungi.

    Science.gov (United States)

    Tedersoo, Leho; Abarenkov, Kessy; Nilsson, R Henrik; Schüssler, Arthur; Grelet, Gwen-Aëlle; Kohout, Petr; Oja, Jane; Bonito, Gregory M; Veldre, Vilmar; Jairus, Teele; Ryberg, Martin; Larsson, Karl-Henrik; Kõljalg, Urmas

    2011-01-01

    Sequence analysis of the ribosomal RNA operon, particularly the internal transcribed spacer (ITS) region, provides a powerful tool for identification of mycorrhizal fungi. The sequence data deposited in the International Nucleotide Sequence Databases (INSD) are, however, unfiltered for quality and are often poorly annotated with metadata. To detect chimeric and low-quality sequences and assign the ectomycorrhizal fungi to phylogenetic lineages, fungal ITS sequences were downloaded from INSD, aligned within family-level groups, and examined through phylogenetic analyses and BLAST searches. By combining the fungal sequence database UNITE and the annotation and search tool PlutoF, we also added metadata from the literature to these accessions. Altogether 35,632 sequences belonged to mycorrhizal fungi or originated from ericoid and orchid mycorrhizal roots. Of these sequences, 677 were considered chimeric and 2,174 of low read quality. Information detailing country of collection, geographical coordinates, interacting taxon and isolation source were supplemented to cover 78.0%, 33.0%, 41.7% and 96.4% of the sequences, respectively. These annotated sequences are publicly available via UNITE (http://unite.ut.ee/) for downstream biogeographic, ecological and taxonomic analyses. In European Nucleotide Archive (ENA; http://www.ebi.ac.uk/ena/), the annotated sequences have a special link-out to UNITE. We intend to expand the data annotation to additional genes and all taxonomic groups and functional guilds of fungi.

  4. Microbiologic Evaluation of Cotton and Polytetrafluoroethylene (PTFE) Tape as Endodontic Spacer Materials in Primary Molars An in Vivo Study.

    Science.gov (United States)

    Prabhakar, Attiguppe Ramasetty; Dixit, Kratika; Raju, O S

    PTFE tape, which is commonly used as plumber's tape is an inorganic, non-fibrous, ribbon like material. The aim of this study was to evaluate PTFE tape as endodontic spacer material and to compare it with commonly used spacer material that is cotton, in primary teeth. Seventeen children undergoing pulpectomy of lower second primary molar bilaterally were included in the study. Cotton and PTFE tape were placed as spacers on each side randomly. Samples were taken from the access cavity at baseline and after seven days to check for microbial leakage. Spacer materials were also checked for microbial contamination. The results revealed that there was a significant increase in the bacterial colony count after seven days in cotton group. The access cavities were also positive for microbial leakage in the cotton group where the spacers showed positive growth. In PTFE group only two samples showed microbial contamination of spacer and out of two only one sample showed contamination of access cavity along with spacer. Within the limitations of this study, it can be concluded that PTFE tape performed better than cotton as endodontic spacer material. Thus, PTFE tape can be recommended as an endodontic spacer material as an alternative to cotton in primary teeth.

  5. Effect of Weld Properties on the Crush Strength of the PWR Spacer Grid

    Directory of Open Access Journals (Sweden)

    Kee-nam Song

    2012-01-01

    Full Text Available Mechanical properties in a weld zone are different from those in the base material because of different microstructures. A spacer grid in PWR fuel is a structural component with an interconnected and welded array of slotted grid straps. Previous research on the strength analyses of the spacer grid was performed using base material properties owing to a lack of mechanical properties in the weld zone. In this study, based on the mechanical properties in the weld zone of the spacer grid recently obtained by an instrumented indentation technique, the strength analyses considering the mechanical properties in the weld zone were performed, and the analysis results were compared with the previous research.

  6. Assessment of cover to reinforcement in slabs using different spacer and tying distances

    Directory of Open Access Journals (Sweden)

    A. P. Maran

    Full Text Available ABSTRACTGiven that the durability of structures is directly related to the thickness of the cover to reinforcement, it is essential to ensure minimum cover is achieved when building a structure. However, studies show that this is not always the case. One of the reasons for the this problem is the lack of indication, in structural projects, of the positioning of spacers. This situation is compounded by the lack of standards and regulations on the use of spacers (i.e. minimum quantities and required layout. This study assesses three different spacer distances and two different tying distances in order to examine the influence of these factors in the cover to reinforcement. To achieve so, three slabs were prepared in situ using different arrangements. After demoulding, cover thickness was determined using a digital covermeter. It was observed that the factors investigated have a significant influence in the final cover.

  7. Biarticular total femur spacer for massive femoral bone loss: the mobile solution for a big problem

    Directory of Open Access Journals (Sweden)

    Pablo Sanz-Ruiz, PhD, MD

    2018-03-01

    Full Text Available Bone cement spacers loaded with antibiotic are the gold standard in septic revision. However, the management of massive bone defects constitutes a surgical challenge, requiring the use of different nails, expensive long stems, or cement-coated tumor prostheses for preparing the spacer. In most cases, the knee joint must be sacrificed. We describe a novel technique for preparing a biarticular total femur spacer with the help of a trochanteric nail coated with antibiotic loaded cement, allowing mobility of the hip and knee joints and assisted partial loading until second step surgery. This technique is helpful to maintain the length of the leg, prevent soft tissue contracture, and help eradicate the infection preserving the patient comfort and autonomy while waiting to receive total femoral replacement.

  8. A high-performance channel engineered charge-plasma-based MOSFET with high-κ spacer

    Science.gov (United States)

    Shan, Chan; Wang, Ying; Luo, Xin; Bao, Meng-tian; Yu, Cheng-hao; Cao, Fei

    2017-12-01

    In this paper, the performance of graded channel double-gate MOSFET (GC-DGFET) that utilizes the charge-plasma concept and a high-κ spacer is investigated through 2-D device simulations. The results demonstrate that GC-DGFET with high-κ spacer can effectively improve the ON-state driving current (ION) and reduce the OFF-leakage current (IOFF). We find that reduction of the initial energy barrier between the source and channel is the origin of this ION enhancement. The reason for the IOFF reduction is identified to be the extension of the effective channel length owing to the fringing field via high-κ spacers. Consequently, these devices offer enhanced performance by reducing the total gate-to-gate capacitance (Cgg) and decreasing the intrinsic delay (τ).

  9. Measurement of droplet dynamics across grid spacer in mist cooling of subchannel of PWR

    International Nuclear Information System (INIS)

    Lee, S.L.; Sheen, H.J.; Cho, S.K.; Issapour, I.

    1984-01-01

    An experiment was conducted of the dynamics and heat transfer of a droplet-vapor mist flow across a test grid spacer in a flow channel of 2 x 2 electrically heated simulation fuel rods. Embedded thermocouples were used to measure the rod cladding temperature and an unshielded Chromel-Alumel thermocouple was transversed in the center of the subchannel to measure the temperature of the water and steam coolant phases at various axial locations. Thermocouples were also embedded in the test grid spacer. Optical measurements of the size and velocity distributions of droplets and the velocity distribution of the superheated steam were made by special laser-Doppler anemometry techniques through quartz glass windows immediately upstream and downstream of the test grid spacer. Experiments over a range of steam and injected water flow rates and rod heat flux have been performed and some representative results and discussions are presented

  10. [Cervical adaptation of complete cast crowns of various metal alloys, with and without die spacers].

    Science.gov (United States)

    Stephano, C B; Roselino, R F; Roselino, R B; Campos, G M

    1989-01-01

    A metallic replica from a dental preparation for crown was used to make 8 class-IV stone dies. The wax patterns for the casting of the crowns were obtained in two conditions: a) from the stone die with no spacer; and b) from the stone die with an acrylic spacer. Thus, 64 metallic crowns were casted, using 4 different alloys: DURACAST (Cu-Al), NICROCAST (Ni-Cr) and DURABOND (Ni-Cr), and gold. The casted crowns were fitted in the metallic replica and measured as to the cervical discrepance of fitting. The results showed that the use of die spacers decreases the clinical discrepancies of fitting of the casted crowns (in a statistically significant level), no matter the metallic alloy employed.

  11. Biarticular total femur spacer for massive femoral bone loss: the mobile solution for a big problem.

    Science.gov (United States)

    Sanz-Ruiz, Pablo; Calvo-Haro, Jose Antonio; Villanueva-Martinez, Manuel; Matas-Diez, Jose Antonio; Vaquero-Martín, Javier

    2018-03-01

    Bone cement spacers loaded with antibiotic are the gold standard in septic revision. However, the management of massive bone defects constitutes a surgical challenge, requiring the use of different nails, expensive long stems, or cement-coated tumor prostheses for preparing the spacer. In most cases, the knee joint must be sacrificed. We describe a novel technique for preparing a biarticular total femur spacer with the help of a trochanteric nail coated with antibiotic loaded cement, allowing mobility of the hip and knee joints and assisted partial loading until second step surgery. This technique is helpful to maintain the length of the leg, prevent soft tissue contracture, and help eradicate the infection preserving the patient comfort and autonomy while waiting to receive total femoral replacement.

  12. Does exchange arthroplasty of an infected shoulder prosthesis provide better eradication rate and better functional outcome, compared to a permanent spacer or resection arthroplasty? a systematic review.

    Science.gov (United States)

    George, D A; Volpin, A; Scarponi, S; Haddad, F S; Romanò, C L

    2016-02-01

    The best surgical modality for treating chronic periprosthetic shoulder infections has not been established, with a lack of randomised comparative studies. This systematic review compares the infection eradication rate and functional outcomes after single- or two-stage shoulder exchange arthroplasty, to permanent spacer implant or resection arthroplasty. Full-text papers and those with an abstract in English published from January 2000 to June 2014, identified through international databases, such as EMBASE and PubMed, were reviewed. Those reporting the success rate of infection eradication after a single-stage exchange, two-stage exchange, resection arthroplasty or permanent spacer implant, with a minimum follow-up of 6 months and sample size of 5 patients were included. Eight original articles reporting the results after resection arthroplasty (n = 83), 6 on single-stage exchange (n = 75), 13 on two-stage exchange (n = 142) and 8 papers on permanent spacer (n = 68) were included. The average infection eradication rate was 86.7 % at a mean follow-up of 39.8 months (SD 20.8) after resection arthroplasty, 94.7 % at 46.8 months (SD 17.6) after a single-stage exchange, 90.8 % at 37.9 months (SD 12.8) after two-stage exchange, and 95.6 % at 31.0 months (SD 9.8) following a permanent spacer implant. The difference was not statistically significant (p = 0.650). Regarding functional outcome, patients treated with single-stage exchange had statistically significant better postoperative Constant scores (mean 51, SD 13) than patients undergoing a two-stage exchange (mean 44, SD 9), resection arthroplasty (mean 32, SD 7) or a permanent spacer implant (mean 31, SD 9) (p = 0.029). However, when considering studies comparing pre- and post-operative Constant scores, the difference was not statistically significant. This systematic review failed to demonstrate a clear difference in infection eradication and functional improvement between all four

  13. Temperature dependence of magnetoresistive properties in bottom spin valve films employing very thin Cu spacers

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Soonchul [School of Electronic Engineering, Soongsil University, Seoul 156-743 (Korea, Republic of)]. E-mail: jschul@ssu.ac.kr; Seigler, Michael A. [Seagate Research, Pittsburgh, PA 15222 (United States)

    2007-09-15

    Temperature dependence of magnetoresistive properties in bottom spin valve films having very thin Cu spacers are reported. NiFeCr55 A/NiFe10 A/IrMn70 A/CoFetA/Ru4 A/CoFe(t+3)A/Cu/CoFe tA/NiFe10 A/Ta50 A bottom spin valve films were deposited using a DC magnetron sputter deposition system. Magnetoresistance (MR) ratio reached a maximum of 13.5% and 11.9% at the Cu thickness of 10.4 A, when the thickness of the CoFe layers t was 20 and 10 A, respectively. Unlike the top spin valves reported earlier, the dip in the MR ratio was not observed when the interlayer coupling between the free layer and reference layer became zero. Sheet resistance change (DR{sub s}) reached a maximum of 4.22 {omega}/{open_square} at the Cu spacer thickness of 10 A when the CoFe thickness t was 10 A. Temperature dependences of MR ratio, DR{sub s}, interlayer coupling field (H {sub i}), and sensitivity showed mostly monotonic decrease as the temperature was increased up to 200 deg. C. It turns out that DR{sub s} for the film having 10.4 A of Cu spacer thickness at 200 deg. C was larger than the DR{sub s} for the film having 20 A of Cu spacer thickness at 40 deg. C. This suggests a high output voltage of the spin valve sensor made of the thin Cu spacer even at high operating temperature. These very thin Cu spacers could be utilized for very small devices where the interlayer coupling field is dominated by high demagnetizing fields.

  14. Opposite replication polarities of transcribed and nontranscribed histone H5 genes

    International Nuclear Information System (INIS)

    Trempe, J.P.; Lindstrom, Y.I.; Leffak, M.

    1988-01-01

    The authors used an in vitro nuclear runoff replication assay to analyze the direction of replication of the active and inactive histone H5 genes in avian cells. In embryonic erythrocytes the transcribed histone H5 gene displayed sensitivity to endogenous nuclease cleavage. In contrast, this gene was insensitive to endogenous nuclease digestion under the same conditions in nuclei of the lymphoblastoid cell line MSB-1, and histone H5 gene transcripts were not detectable by dot-blot analysis of MSB-1 cell RNA. When nuclei were isolated from embryonic erythrocyctes and incubated with bromodeoxyuridine triphosphate, runoff replication from endogenous nuclease cleavage sites led to a relative enrichment for fragments near the 3' end of the histone H5 gene in the density-labeled DNA. In nuclei of MSB-1 cells or chicken embryo fibroblasts, however, runoff replication from restriction enzyme-cut sites (or induced endogenous nuclease-cut sites in MSB-1 nuclei) led to a relative enrichment for fragments near the 5' end of the H5 gene in dense DNA. Based on the enhanced incorporation of bromodeoxyuridine into origin-distal regions of DNA during the in vitro runoff replication assay, the authors conclude that the active histone H5 gene in embryonic erythrocytes is preferentially replicated in the transcriptional direction from an origin in the 5'-flanking DNA, whereas its inactive counterparts in MSB-1 cells and chicken embryo fibroblasts are preferentially replicated in the opposite direction

  15. CDK9 inhibitors define elongation checkpoints at both ends of RNA polymerase II-transcribed genes.

    Science.gov (United States)

    Laitem, Clélia; Zaborowska, Justyna; Isa, Nur F; Kufs, Johann; Dienstbier, Martin; Murphy, Shona

    2015-05-01

    Transcription through early-elongation checkpoints requires phosphorylation of negative transcription elongation factors (NTEFs) by the cyclin-dependent kinase (CDK) 9. Using CDK9 inhibitors and global run-on sequencing (GRO-seq), we have mapped CDK9 inhibitor-sensitive checkpoints genome wide in human cells. Our data indicate that early-elongation checkpoints are a general feature of RNA polymerase (pol) II-transcribed human genes and occur independently of polymerase stalling. Pol II that has negotiated the early-elongation checkpoint can elongate in the presence of inhibitors but, remarkably, terminates transcription prematurely close to the terminal polyadenylation (poly(A)) site. Our analysis has revealed an unexpected poly(A)-associated elongation checkpoint, which has major implications for the regulation of gene expression. Interestingly, the pattern of modification of the C-terminal domain of pol II terminated at this new checkpoint largely mirrors the pattern normally found downstream of the poly(A) site, thus suggesting common mechanisms of termination.

  16. CpSAT-1, a transcribed satellite sequence from the codling moth, Cydia pomonella.

    Science.gov (United States)

    Věchtová, Pavlína; Dalíková, Martina; Sýkorová, Miroslava; Žurovcová, Martina; Füssy, Zoltán; Zrzavá, Magda

    2016-08-01

    Satellite DNA (satDNA) is a non-coding component of eukaryotic genomes, located mainly in heterochromatic regions. Relevance of satDNA began to emerge with accumulating evidence of its potential yet hardly comprehensible role that it can play in the genome of many organisms. We isolated the first satDNA of the codling moth (Cydia pomonella, Tortricidae, Lepidoptera), a species with holokinetic chromosomes and a single large heterochromatic element, the W chromosome in females. The satDNA, called CpSAT-1, is located on all chromosomes of the complement, although in different amounts. Surprisingly, the satellite is almost missing in the heterochromatic W chromosome. Additionally, we isolated mRNA from all developmental stages (1st-5th instar larva, pupa, adult), both sexes (adult male and female) and several tissues (Malpighian tubules, gut, heart, testes, and ovaries) of the codling moth and showed the CpSAT-1 sequence was transcribed in all tested samples. Using CpSAT-1 specific primers we amplified, cloned and sequenced 40 monomers from cDNA and gDNA, respectively. The sequence analysis revealed a high mutation rate and the presence of potentially functional motifs, mainly in non-conserved regions of the monomers. Both the chromosomal distribution and the sequence analysis suggest that CPSAT-1 has no function in the C. pomonella genome.

  17. An Arabidopsis jmjC domain protein protects transcribed genes from DNA methylation at CHG sites.

    Science.gov (United States)

    Miura, Asuka; Nakamura, Miyuki; Inagaki, Soichi; Kobayashi, Akie; Saze, Hidetoshi; Kakutani, Tetsuji

    2009-04-22

    Differential cytosine methylation of genes and transposons is important for maintaining integrity of plant genomes. In Arabidopsis, transposons are heavily methylated at both CG and non-CG sites, whereas the non-CG methylation is rarely found in active genes. Our previous genetic analysis suggested that a jmjC domain-containing protein IBM1 (increase in BONSAI methylation 1) prevents ectopic deposition of non-CG methylation, and this process is necessary for normal Arabidopsis development. Here, we directly determined the genomic targets of IBM1 through high-resolution genome-wide analysis of DNA methylation. The ibm1 mutation induced extensive hyper-methylation in thousands of genes. Transposons were unaffected. Notably, long transcribed genes were most severely affected. Methylation of genes is limited to CG sites in wild type, but CHG sites were also methylated in the ibm1 mutant. The ibm1-induced hyper-methylation did not depend on previously characterized components of the RNAi-based DNA methylation machinery. Our results suggest novel transcription-coupled mechanisms to direct genic methylation not only at CG but also at CHG sites. IBM1 prevents the CHG methylation in genes, but not in transposons.

  18. Enhancer transcribed RNAs arise from hypomethylated, Tet-occupied genomic regions.

    Science.gov (United States)

    Pulakanti, Kirthi; Pinello, Luca; Stelloh, Cary; Blinka, Steven; Allred, Jeremy; Milanovich, Samuel; Kiblawi, Sid; Peterson, Jonathan; Wang, Alexander; Yuan, Guo-Cheng; Rao, Sridhar

    2013-12-01

    Enhancers are cis-acting elements capable of regulating transcription in a distance and orientation-independent manner. A subset of enhancers are occupied by RNA polymerase II (RNAP II) and transcribed to produce long non-coding RNAs termed eRNAs. We thoroughly investigated the association between eRNA productivity and various chromatin marks and transcriptional regulators in mouse embryonic stem cells (ESCs) through an integrative approach. We found that eRNA-producing enhancers exhibited elevated levels of the active mark H3K27Ac, decreased DNA methylation, and enrichment for the DNA hydroxylase Tet1. Many eRNA-producing enhancers have recently been characterized as "super-enhancers," suggesting an important role in the maintenance of pluripotency. Using experimental methods, we focally investigated a well-characterized enhancer linked to the Nanog locus and confirmed its exclusive eRNA productivity in ESCs. We further demonstrate that the binding of Sall4 and Tet family proteins were required for eRNA productivity at this locus. Collectively, we demonstrate that Tet1 binding and DNA hypomethylation are hallmarks of eRNA production.

  19. Identification of genes transcribed by Streptococcus equi ssp. zooepidemicus in infected porcine lung.

    Science.gov (United States)

    Yi, Li; Wang, Yang; Ma, Zhe; Zhang, Hui; Xie, Huaidong; Yang, Yongchun; Lu, Chengping; Fan, Hongjie

    2013-01-01

    Streptococcus equi ssp. zooepidemicus (SEZ) is a Gram-positive bacterium responsible for respiratory tract infection, septicemia, meningitis, endocarditis and arthritis in swine and humans. However, the expression and regulation of SEZ genes during an infection in vivo are poorly understood. In this study, we focused on the identification of SEZ genes preferentially expressed in vivo during infection in pigs. This study identified 45 SEZ genes that were upregulated in infected porcine lung tissues using the selective capture of transcribed sequences (SCOTS) technique and comparative dot-blot analysis, followed by quantitative RT-PCR validation. The identified genes were characterized into 6 functional categories: metabolism, cell wall-associated, stress response, transporters, regulators and unknown functions. Our study successfully identified multiple genes, which can deepen our understanding about SEZ pathogenesis and infer probable virulence factors. It will promote the development of novel vaccines and therapies about this pathogen for further study. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. Renal failure after placement of an articulating, antibiotic impregnated polymethylmethacrlyate hip spacer

    Directory of Open Access Journals (Sweden)

    Robert P. Runner, MD

    2018-03-01

    Full Text Available A 58-year-old male presented with native joint septic arthritis of the hip and osteomyelitis. After treatment with an articulating antibiotic spacer, he developed acute renal failure requiring dialysis. He continued to have elevated serum tobramycin levels exclusively from the antibiotic spacer elution as no intravenous tobramycin was used. Subsequent explantation was required to correct his renal failure. Although renal failure after antibiotic impregnated cement placement is rare, the risk of this potential complication should be considered preoperatively and in the postoperative management of these patients.

  1. Spacer stitching’, an innovative material feeding technology for improved thermal resistance

    Science.gov (United States)

    Saeed, H.; Rödel, H.; Krzywinski, S.; Hes, L.

    2017-10-01

    This paper investigates the problems associated with heat loss occurring at the points of needle insertion. The insulation material at stitching points is compressed by sewing thread tensions and consequently the air entrapped is forced to leave its structure. It results in poor thermal insulation at the points of needle insertions. An innovative material feeding technology, ‘Spacer stitching’ is developed which addresses the state of the art of cold spots with a simpler and much efficient method. A comparison of sewing samples of conventional sewing technology with the spacer stitching is carried out in this research paper to study the improvement in thermal properties.

  2. Automatic actuation of a dry powder inhaler into a nonelectrostatic spacer

    DEFF Research Database (Denmark)

    Bisgaard, H

    1998-01-01

    This article describes a new "automatic spacer" device, which has been developed to improve the delivery of inhaled medication to young children. In the device, a dry powder inhaler (DPI) is mechanically actuated into a nonelectrostatic spacer, producing an aerosol cloud of fine drug particles (a...... of the actuation (relative standard deviation, 12%), and a prolonged residence time of the fine particle aerosol (half-life of the fallout of the fine particles, 82 s). These features should prove advantageous in the treatment of young children with inhaled medication....

  3. Microbial fuel cells with an integrated spacer and separate anode and cathode modules

    KAUST Repository

    He, Weihua

    2016-01-01

    A new type of scalable MFC was developed based on using alternating graphite fiber brush array anode modules and dual cathode modules in order to simplify construction, operation, and maintenance of the electrodes. The modular MFC design was tested with a single (two-sided) cathode module with a specific surface area of 29 m2 m−3 based on a total liquid volume (1.4 L; 20 m2 m−3 using the total reactor volume of 2 L), and two brush anode modules. Three different types of spacers were used in the cathode module to provide structural stability, and enhance air flow relative to previous cassette (combined anode–cathode) designs: a low-profile wire spacer; a rigid polycarbonate column spacer; and a flexible plastic mesh spacer. The best performance was obtained using the wire spacer that produced a maximum power density of 1100 ± 10 mW m−2 of cathode (32 ± 0.3 W m−3 based on liquid volume) with an acetate-amended wastewater (COD = 1010 ± 30 mg L−1), compared to 1010 ± 10 mW m−2 for the column and 650 ± 20 mW m−2 for the mesh spacers. Anode potentials were unaffected by the different types of spacers. Raw domestic wastewater produced a maximum of 400 ± 8 mW m−2 under fed batch conditions (wire-spacers), which is one of the highest power densities for this fuel. Over time the maximum power was reduced to 300 ± 10 mW m−2 and 275 ± 7 mW m−2 for the two anode compartments, with only slightly less power of 250 ± 20 mW m−2 obtained under continuous flow conditions. In fixed-resistance tests, the average COD removal was 57 ± 5% at a hydraulic retention time of 8 h. These results show that this modular MFC design can both simplify reactor construction and enable relatively high power generation from even relatively dilute wastewater.

  4. Heterogeneous Diversity of Spacers within CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats)

    Science.gov (United States)

    He, Jiankui; Deem, Michael W.

    2010-09-01

    Clustered regularly interspaced short palindromic repeats (CRISPR) in bacterial and archaeal DNA have recently been shown to be a new type of antiviral immune system in these organisms. We here study the diversity of spacers in CRISPR under selective pressure. We propose a population dynamics model that explains the biological observation that the leader-proximal end of CRISPR is more diversified and the leader-distal end of CRISPR is more conserved. This result is shown to be in agreement with recent experiments. Our results show that the CRISPR spacer structure is influenced by and provides a record of the viral challenges that bacteria face.

  5. Self-structuring of lamellar bridged silsesquioxanes with long side spacers.

    Science.gov (United States)

    Fernandes, Mariana; Nobre, Sónia S; Xu, Qinghong; Carcel, Carole; Cachia, Jean Nicolas; Cattoën, Xavier; Sousa, José M; Ferreira, Rute A S; Carlos, Luís D; Santilli, Celso V; Wong Chi Man, Michel; Bermudez, Verónica de Zea

    2011-09-22

    Diurea cross-linked bridged silsesquioxanes (BSs) C(10)C(n)C(10) derived from organosilane precursors, including decylene chains as side spacers and alkylene chains with variable length as central spacers (EtO)(3)Si-(CH(2))(10)-Y-(CH(2))(n)-Y-(CH(2))(10)-Si(OEt)(3) (n = 7, 9-12; Y = urea group and Et = ethyl), have been synthesized through the combination of self-directed assembly and an acid-catalyzed sol-gel route involving the addition of dimethylsulfoxide (DMSO) and a large excess of water. This new family of hybrids has enabled us to conclude that the length of the side spacers plays a unique role in the structuring of alkylene-based BSs, although their morphology remains unaffected. All the samples adopt a lamellar structure. While the alkylene chains are totally disordered in the case of the C(10)C(7)C(10) sample, a variable proportion of all-trans and gauche conformers exists in the materials with longer central spacers. The highest degree of structuring occurs for n = 9. The inclusion of decylene instead of propylene chains as side spacers leads to the formation of a stronger hydrogen-bonded urea-urea array as evidenced by two dimensional correlation Fourier transform infrared spectroscopic analysis. The emission spectra and emission quantum yields of the C(10)C(n)C(10) materials are similar to those reported for diurea cross-linked alkylene-based BSs incorporating propylene chains as side spacers and prepared under different experimental conditions. The emission of the C(10)C(n)C(10) hybrids is ascribed to the overlap of two distinct components that occur within the urea cross-linkages and within the siliceous nanodomains. Time-resolved photoluminescence spectroscopy has provided evidence that the average distance between the siliceous domains and the urea cross-links is similar in the C(10)C(n)C(10) BSs and in oxyethylene-based hybrid analogues incorporating propylene chains as side spacers (diureasils), an indication that the longer side chains in the

  6. Optimization of base-to-emitter spacer thickness to maximize the frequency response of bipolar transistors

    Science.gov (United States)

    Lee, Wai-Kit; Chan, Alain C. K.; Chan, Mansun

    2005-04-01

    The impacts of base-to-emitter spacer thickness on the unity gain frequency ( fT), base resistance ( rB), base collector capacitance ( CBC) and maximum oscillation frequency ( fmax) of a bipolar junction transistor (BJT) are studied. Using the extracted Y-parameters from a simulated device with structural parameters calibrated to an actual process, the resulting fT and fmax with different spacer thickness is reported. A tradeoff between peak fT and fmax is observed and the process window to obtain high fT and fmax is proposed.

  7. Comparison of velocity and temperature fields for two types of spacers in an annular channel

    Directory of Open Access Journals (Sweden)

    Lávička David

    2012-04-01

    Full Text Available The paper deals with measurement of flow field using a modern laser method (PIV in an annular channel of very small dimension - a fuel cell model. The velocity field was measured in several positions and plains around the spacer. The measurement was extended also to record temperatures by thermocouples soldered into stainless-steel tube wall. The measurement was focused on cooling process of the preheated fuel cell tube model, where the tube was very slowly flooded with water. Main result of the paper is comparison of two spacer's designs with respect to measured velocity and temperature fields.

  8. Hole-transfer induced energy transfer in perylene diimide dyads with a donor-spacer-acceptor motif.

    Science.gov (United States)

    Kölle, Patrick; Pugliesi, Igor; Langhals, Heinz; Wilcken, Roland; Esterbauer, Andreas J; de Vivie-Riedle, Regina; Riedle, Eberhard

    2015-10-14

    We investigate the photoinduced dynamics of perylene diimide dyads based on a donor-spacer-acceptor motif with polyyne spacers of varying length by pump-probe spectroscopy, time resolved fluorescence, chemical variation and quantum chemistry. While the dyads with pyridine based polyyne spacers undergo energy transfer with near-unity quantum efficiency, in the dyads with phenyl based polyyne spacers the energy transfer efficiency drops below 50%. This suggests the presence of a competing electron transfer process from the spacer to the energy donor as the excitation sink. Transient absorption spectra, however, reveal that the spacer actually mediates the energy transfer dynamics. The ground state bleach features of the polyyne spacers appear due to the electron transfer decay with the same time constant present in the rise of the ground state bleach and stimulated emission of the perylene energy acceptor. Although the electron transfer process initially quenches the fluorescence of the donor it does not inhibit energy transfer to the perylene energy acceptor. The transient signatures reveal that electron and energy transfer processes are sequential and indicate that the donor-spacer electron transfer state itself is responsible for the energy transfer. Through the introduction of a Dexter blocker unit into the spacer we can clearly exclude any through bond Dexter-type energy transfer. Ab initio calculations on the donor-spacer and the donor-spacer-acceptor systems reveal the existence of a bright charge transfer state that is close in energy to the locally excited state of the acceptor. Multipole-multipole interactions between the bright charge transfer state and the acceptor state enable the energy transfer. We term this mechanism coupled hole-transfer FRET. These dyads represent a first example that shows how electron transfer can be connected to energy transfer for use in novel photovoltaic and optoelectronic devices.

  9. Novel anthracycline-spacer-beta-glucuronide, -beta-glucoside, and -beta-galactoside prodrugs for application in selective chemotherapy

    NARCIS (Netherlands)

    Leenders, RGG; Damen, EWP; Bijsterveld, EJA; Scheeren, HW; Houba, PHJ; van der Meulen-Muileman, IH; Boven, E; Haisma, HJ

    A series of anthracycline prodrugs containing an immolative spacer was synthesized for application in selective chemotherapy. The prodrugs having the general structure anthracycline-spacer-beta-glycoside were designed to be activated by beta-glucuronidase or beta-galactosidase. Prodrugs with

  10. Interference-driven spacer acquisition is dominant over naive and primed adaptation in a native CRISPR-Cas system

    NARCIS (Netherlands)

    Staals, Raymond H.J.; Jackson, Simon A.; Biswas, Ambarish; Brouns, Stan J.J.; Brown, Chris M.; Fineran, Peter C.

    2016-01-01

    CRISPR-Cas systems provide bacteria with adaptive immunity against foreign nucleic acids by acquiring short, invader-derived sequences called spacers. Here, we use high-throughput sequencing to analyse millions of spacer acquisition events in wild-type populations of Pectobacterium atrosepticum.

  11. A Study of Neutronics Effects of the Spacer Grids in a Typical PWR via Monte Carlo Calculation

    Directory of Open Access Journals (Sweden)

    Xuan Bach Tran

    2016-02-01

    Full Text Available Spacer grids play an important role in maintaining the proper form of the fuel assembly structure and ensuring the safety of reactor core design. This study applies the Monte Carlo method to the analysis of the neutronics effects of spacer grids in a typical pressurized water reactor (PWR. The core problem used to analyze the neutronics effects of spacer grids is a modified version of Korea Advanced Institute of Science and Technology benchmark problem 1B, based on an Advanced Power Reactor 1400 (APR1400 core model. The spacer grids are modeled and added to this test problem in various ways. Then, by running MCNP5 for all cases of spacer grid modeling, some important numerical results, such as the effective multiplication factor, the spatial distributions of neutron flux, and its energy spectrum are obtained. The numerical results of each case of spacer grid modeling are analyzed and compared to assess which type has more advantages in accuracy of numerical results and effectiveness in terms of geometry building. The conclusion is that the most realistic modeling for Monte Carlo calculation is the “volume-preserving” streamlined heterogeneous spacer grids, but the “banded” dissolution spacer grids modeling is a more practical yet accurate model for routine (deterministic analysis.

  12. Unusual low-energy near-infrared bands for ferrocenyl-naphthalimide donor-acceptor dyads with aromatic spacer groups

    DEFF Research Database (Denmark)

    Tagg, Tei; Kjærgaard, Henrik Grum; Lane, Joseph R.

    2015-01-01

    Time-dependent density functional theory (TDDFT) calculations for a series of donor-spacer-acceptor (D-S-A) molecules with phenyl (1), biphenyl (2), and anthryl (3) spacers interpolated between the ferrocenylalkene donor and -C≡C-4-naphthalimido acceptor components predicted the presence of weak,...

  13. Whorl-specific expression of the SUPERMAN gene of Arabidopsis is mediated by cis elements in the transcribed region.

    Science.gov (United States)

    Ito, Toshiro; Sakai, Hajime; Meyerowitz, Elliot M

    2003-09-02

    The SUPERMAN (SUP) gene of Arabidopsis is involved in controlling cell proliferation in stamen and carpel primordia and in ovules during flower development. The SUP gene encodes a transcription factor with a C2H2-type zinc finger motif, a serine/proline-rich domain, a basic domain, and a leucine-zipper-like domain and is expressed in a very limited region in stamen primordia and in the developing ovary during flower development. The SUP gene is susceptible to methylation, resulting in epigenetic gene silencing. To understand how the SUP gene is expressed spatially and temporally in its restricted domain, and why methylation of the transcribed region affects early-stage SUP expression, we have identified the SUP cis regulatory elements by characterizing SUP gene fusions. These studies show that the SUP gene has discrete upstream promoter elements required for expression in stamen primordia in early stages and in the ovary in later stages. The promoter activity for stamen primordia is modulated by several positive and negative elements located in the transcribed and translated regions. Several regulatory elements in the transcribed region correlate with the areas of the gene that are heavily methylated in epigenetic alleles; these data provide a possible explanation of how methylation of the transcribed region represses transcription.

  14. MytiBase: a knowledgebase of mussel (M. galloprovincialis transcribed sequences

    Directory of Open Access Journals (Sweden)

    Roch Philippe

    2009-02-01

    Full Text Available Abstract Background Although Bivalves are among the most studied marine organisms due to their ecological role, economic importance and use in pollution biomonitoring, very little information is available on the genome sequences of mussels. This study reports the functional analysis of a large-scale Expressed Sequence Tag (EST sequencing from different tissues of Mytilus galloprovincialis (the Mediterranean mussel challenged with toxic pollutants, temperature and potentially pathogenic bacteria. Results We have constructed and sequenced seventeen cDNA libraries from different Mediterranean mussel tissues: gills, digestive gland, foot, anterior and posterior adductor muscle, mantle and haemocytes. A total of 24,939 clones were sequenced from these libraries generating 18,788 high-quality ESTs which were assembled into 2,446 overlapping clusters and 4,666 singletons resulting in a total of 7,112 non-redundant sequences. In particular, a high-quality normalized cDNA library (Nor01 was constructed as determined by the high rate of gene discovery (65.6%. Bioinformatic screening of the non-redundant M. galloprovincialis sequences identified 159 microsatellite-containing ESTs. Clusters, consensuses, related similarities and gene ontology searches have been organized in a dedicated, searchable database http://mussel.cribi.unipd.it. Conclusion We defined the first species-specific catalogue of M. galloprovincialis ESTs including 7,112 unique transcribed sequences. Putative microsatellite markers were identified. This annotated catalogue represents a valuable platform for expression studies, marker validation and genetic linkage analysis for investigations in the biology of Mediterranean mussels.

  15. Plasmin-activated doxorubicin prodrugs containing a spacer reduce tumor growth and angiogenesis without systemic toxicity

    NARCIS (Netherlands)

    Devy, L.; Groot, F.M.H. de; Blacher, S.; Hajitou, A.; Beusker, P.H.; Scheeren, J.W.; Foidart, J.M.; Noel, A.

    2004-01-01

    To generate doxorubicin (Dox) specifically at the tumor site, the chemotherapeutic agent was incorporated into a prodrug by linkage to a peptide specifically recognized by plasmin, which is overproduced in many cancers. ST-9905, which contains an elongated self-elimination spacer, is activated more

  16. Exploring backbone-cation alkyl spacers for multi-cation side chain anion exchange membranes

    Science.gov (United States)

    Zhu, Liang; Yu, Xuedi; Hickner, Michael A.

    2018-01-01

    In order to systematically study how the arrangement of cations on the side chain and length of alkyl spacers between cations impact the performance of multi-cation AEMs for alkaline fuel cells, a series of polyphenylene oxide (PPO)-based AEMs with different cationic side chains were synthesized. This work resulted in samples with two or three cations in a side chain pendant to the PPO backbone. More importantly, the length of the spacer between cations varied from 3 methylene (-CH2-) (C3) groups to 8 methylene (C8) groups. The highest conductivity, up to 99 mS/cm in liquid water at room temperature, was observed for the triple-cation side chain AEM with pentyl (C5) or hexyl (C6) spacers. The multi-cation AEMs were found to have decreased water uptake and ionic conductivity when the spacer chains between cations were lengthened from pentyl (C5) or hexyl (C6) to octyl (C8) linking groups. The triple-cation membranes with pentyl (C5) or hexyl (C6) groups between cations showed greatest stability after immersion in 1 M NaOH at 80 °C for 500 h.

  17. Response of an annular electrostatic probe for a right cylindrical spacer

    DEFF Research Database (Denmark)

    Johansson, Torben; MacAllister, I. W.

    2002-01-01

    The response of an annular electrostatic probe mounted in an electrode is examined with reference to a right cylindrical spacer. The study involves using the probe λ function to derive characteristic parameters. These parameters enable the response of the probe to different charge distributions...

  18. The sequence of spacers between the consensus sequences modulates the strength of procaryotic promoters

    DEFF Research Database (Denmark)

    Jensen, Peter Ruhdal; Hammer, Karin

    1998-01-01

    A library of synthetic promoters for Lactococcus lactis was constructed, in which the known consensus sequences were kept constant while the sequences of the separating spacers were randomized. The library consists of 38 promoters which differ in strength from 0.3 relative units, and up to more t......-reactors and cell factories....

  19. Plane wave scattering from a plasmonic nanowire array spacer-separated from a plasmonic film

    Science.gov (United States)

    Thomas, Arun; Trivedi, Rahul; Dhawan, Anuj

    2016-06-01

    In this paper, we present a theoretical analysis of the electromagnetic response of a plasmonic nanowire-spacer-plasmonic film system. The analytical solution presented in this paper is a full-wave solution, which is used to compute the fields scattered by the plasmonic nanostructure system on illumination by a plane electromagnetic wave. The physical structure comprises of an array of plasmonic nanowires made of a plasmonic metal such as gold or silver placed over a plasmonic film of the same material and separated from it by a dielectric spacer such as silica or alumina. Such a nanostructure exhibits a spectrum that is extremely sensitive to various geometric and electromagnetic parameters such as spacer thickness and spacer refractive index, which makes it favourable for various sensing applications such as chemical and biological sensing, strain sensing, position sensing, vibration sensing, and thickness sensing. We report a comparison of our analytical solution with a numerical rigorous coupled wave analysis of the same structure with the plasmonic medium being treated as local in nature.

  20. Recovery of knee mobility after a static or mobile spacer in total knee infection

    NARCIS (Netherlands)

    Brunnekreef, J.J.; Hannink, G.; Mde, W. Malefijt

    2013-01-01

    The purpose of the study was to compare the recovery of knee mobility after two-stage revision of an infected total knee arthroplasty using a static or mobile spacer. At 12 months follow-up, none of the patients had a recurrent infection of their new prosthesis. Knee flexion was lower in the static

  1. Peri-Prosthetic Knee Infection Management: Spacers Loaded with Two or Three Antibiotic Agents.

    Science.gov (United States)

    Ortola, David Joaquin; Fenga, Domenico; Marcellino, Sandra; Rosi, Massimiliano; Centofanti, Francesco; Rosa, Michele Attilio

    2017-07-01

    The purpose of this work was to compare pre-made antibiotic-loaded spacers with two commercially available antibiotic agents and custom-made cements with three antibiotic agents added. We evaluated: (a) the validity of our procedures, (b) the control of the rate of infection in the long term, (c) complications, and (d) quality of life and patient satisfaction. A retrospective cohort study was performed on 112 consecutively treated patients between January 2010 and December 2013; 56 patients were treated with a pre-formed cement spacer (clindamycin + gentamicin), and 56 patients were treated with a spacer loaded with three antibiotic agents (clindamycin + gentamicin + vancomycin). Demographic data were collected: Classification of infection according to criteria of Cierny-Mader; microbiologic results; number of previous operations; and years of disease. Infection control or relapse after at least 18 months of follow-up was evaluated. Complications were recorded. Every patient completed the SF-36 test and Oxford Knee Score. With a follow-up of 32.87 months (standard deviation 12.04), at the end of treatment, amputation occurred in three of 112 patients because of recurrence of infection, and one patient died from other causes not related to the infection. The study population presented a rate of recurrence of infection of 2.70%. Our results suggest that a two stage re-implant with three antibiotic agents added to the spacer should be considered to avoid rescue procedures, especially in patients with multi-resistant micro-organism infections.

  2. Mechanical Properties Of 3D-Structure Composites Based On Warp-Knitted Spacer Fabrics

    Directory of Open Access Journals (Sweden)

    Chen Si

    2015-06-01

    Full Text Available In this paper, the mechanical properties (compression and impact behaviours of three-dimension structure (3D-structure composites based on warp-knitted spacer fabrics have been thoroughly investigated. In order to discuss the effect of fabric structural parameters on the mechanical performance of composites, six different types of warp-knitted spacer fabrics having different structural parameters (such as outer layer structure, diameter of spacer yarn, spacer yarn inclination angle and thickness were involved for comparison study. The 3D-structure composites were fabricated based on a flexible polyurethane foam. The produced composites were characterised for compression and impact properties. The findings obtained indicate that the fabric structural parameters have strong influence on the compression and impact responses of 3D-structure composites. Additionally, the impact test carried out on the 3D-structure composites shows that the impact loads do not affect the integrity of composite structure. All the results reveal that the product exhibits promising mechanical performance and its service life can be sustained.

  3. Anomalous DNA binding by E2 regulatory protein driven by spacer sequence TATA.

    Science.gov (United States)

    Xi, Zhiqun; Zhang, Yongli; Hegde, Rashmi S; Shakked, Zippora; Crothers, Donald M

    2010-06-01

    We have investigated the anomalously weak binding of human papillomavirus (HPV) regulatory protein E2 to a DNA target containing the spacer sequence TATA. Experiments in magnesium (Mg(2+)) and calcium (Ca(2+)) ion buffers revealed a marked reduction in cutting by DNase I at the CpG sequence in the protein-binding site 3' to the TATA spacer sequence, Studies of the cation dependence of DNA-E2 affinities showed that upon E2 binding the TATA sequence releases approximately twice as many Mg(2+) ions as the average of the other spacer sequences. Binding experiments for TATA spacer relative to ATAT showed that in potassium ion (K(+)) the E2 affinity of the two sequences is nearly equal, but the relative dissociation constant (K(d)) for TATA increases in the order K(+ )TATA relative to ATAT is independent of ion concentration, whereas for Mg(2+) the affinity for TATA drops sharply as ion concentration increases. Thus, ions of increasing positive charge density increasingly distort the E2 binding site, weakening the affinity for protein. In the case of Mg(2+), additional ions are bound to TATA that require displacement for protein binding. We suggest that the TATA sequence may bias the DNA structure towards a conformation that binds the protein relatively weakly.

  4. The Interspinous Spacer: A New Posterior Dynamic Stabilization Concept for Prevention of Adjacent Segment Disease

    Directory of Open Access Journals (Sweden)

    Antoine Nachanakian

    2013-01-01

    Full Text Available Introduction. Posterior Dynamic stabilization using the interspinous spacer device is a known to be used as an alternative to rigid fusion in neurogenic claudication patients in the absence of macro instability. Actually, it plays an important in the management of adjacent segment disease in previously fused lumbar spine. Materials and Method. We report our experience with posterior dynamic stabilization using an interspinous spacer. 134 cases performed in our institution between September 2008 and August 2012 with different lumbar spine pathologies. The ages of our patients were between 40 and 72 years, with a mean age of 57 years. After almost 4 years of follow up in our patient and comparing their outcome to our previous serious we found that in some case the interspinous distracter has an important role not only in the treatment of adjacent segment disease but also in its prevention. Results and Discussion. Clinical improvement was noted in ISD-treated patients, with high satisfaction rate. At first, radicular pain improves with more than 3/10 reduction of the mean score on visual analog scale (VAS. In addition, disability score as well as disc height and lordotic angle showed major improvement at 3 to 6 months post operatively. And, no adjacent segment disease was reported in the patient operated with interspinous spacer. Conclusion. The interspinous spacer is safe and efficient modality to be used not only as a treatment of adjacent segment disease but also as a preventive measure in patients necessitating rigid fusion.

  5. Silver Nanoparticles Stabilised by Cationic Gemini Surfactants with Variable Spacer Length

    Directory of Open Access Journals (Sweden)

    Martin Pisárčik

    2017-10-01

    Full Text Available The present study is focused on the synthesis and investigation of the physicochemical and biological properties of silver nanoparticles stabilized with a series of cationic gemini surfactants having a polymethylene spacer of variable length. UV-VIS spectroscopy, dynamic light scattering, scanning electron microscopy and zeta potential measurements were applied to provide physicochemical characterization of the silver nanoparticles. The mean size values of the nanoparticles were found to be in the 50 to 115 nm range. From the nanoparticle size distributions and scanning electron microscopy images it results that a population of small nanoparticles with the size of several nanometers was confirmed if the nanoparticles were stabilized with gemini molecules with either a short methylene spacer (two or four −CH2− groups or a long spacer (12 −CH2− groups. The average zeta potential value for silver nanoparticles stabilized with gemini molecules is roughly independent of gemini surfactant spacer length and is approx. +58 mV. An interaction model between silver nanoparticles and gemini molecules which reflects the gained experimental data, is suggested. Microbicidal activity determinations revealed that the silver nanoparticles stabilized with gemini surfactants are more efficient against Gram-negative bacteria and yeasts, which has a direct relation to the interaction mechanism of nanoparticles with the bacterial cell membrane and its structural composition.

  6. Modeling the effect of spacers and biofouling on forward osmosis performance

    KAUST Repository

    Mosqueira Santillán, María José

    2014-11-01

    Currently, the most utilized desalination technology is reverse osmosis (RO), where a membrane is used as a physical barrier to separate the salts from the seawater, using high hydraulic pressure as driving force. A major problem in RO systems is biofouling, caused by severe growth of bacterial biofilms. Both, the need of an external energy input, as well as biofouling, impose a high cost on RO operation. Forward osmosis (FO) is an alternative membrane process that uses an osmotic pressure difference as driving force. FO uses a concentrated draw solution to generate high osmotic pressure, which extracts water across a semi permeable membrane from a feed solution. One of the main advantages of FO is the limited amount of external energy required to extract water from the feed solution. The objective of this research is the assessment of the impact of spacers, separating the membrane sheets, and biofouling on the FO system performance. This type of studies allow the optimization of membrane devices and operational conditions. For this, a two dimensional numerical model for FO systems was developed using computational fluid dynamics (CFD). This model allowed the evaluation of the impact of (i) spacers and (ii) biofilm, and (iii) the combined impact of spacers and biofilm on the performance of FO systems. The results obtained showed that the presence of spacers improved the performance of FO systems. Cavity configuration spacer gave the higher water flux across the membrane in clean systems; whereas for biofouled systems, the submerged configuration showed a better performance. In absence of spacers, the thickness or amount of biofilm is inversely proportional with the water flux. Furthermore, membrane surface coverage of the biofilm is more important than the amount of biofilm in terms of the impact on the performance. The numerical model can be adapted with other parameters (e.g. membrane and spacer thickness, feed and draw solution, solution concentration, etc.) to

  7. How type II CRISPR-Cas establish immunity through Cas1-Cas2-mediated spacer integration.

    Science.gov (United States)

    Xiao, Yibei; Ng, Sherwin; Nam, Ki Hyun; Ke, Ailong

    2017-10-05

    CRISPR (clustered regularly interspaced short palindromic repeats) and the nearby Cas (CRISPR-associated) operon establish an RNA-based adaptive immunity system in prokaryotes. Molecular memory is created when a short foreign DNA-derived prespacer is integrated into the CRISPR array as a new spacer. Whereas the RNA-guided CRISPR interference mechanism varies widely among CRISPR-Cas systems, the spacer integration mechanism is essentially identical. The conserved Cas1 and Cas2 proteins form an integrase complex consisting of two distal Cas1 dimers bridged by a Cas2 dimer. The prespacer is bound by Cas1-Cas2 as a dual-forked DNA, and the terminal 3'-OH of each 3' overhang serves as an attacking nucleophile during integration. The prespacer is preferentially integrated into the leader-proximal region of the CRISPR array, guided by the leader sequence and a pair of inverted repeats inside the CRISPR repeat. Spacer integration in the well-studied Escherichia coli type I-E CRISPR system also relies on the bacterial integration host factor. In type II-A CRISPR, however, Cas1-Cas2 alone integrates spacers efficiently in vitro; other Cas proteins (such as Cas9 and Csn2) have accessory roles in the biogenesis phase of prespacers. Here we present four structural snapshots from the type II-A system of Enterococcus faecalis Cas1 and Cas2 during spacer integration. Enterococcus faecalis Cas1-Cas2 selectively binds to a splayed 30-base-pair prespacer bearing 4-nucleotide 3' overhangs. Three molecular events take place upon encountering a target: first, the Cas1-Cas2-prespacer complex searches for half-sites stochastically, then it preferentially interacts with the leader-side CRISPR repeat, and finally, it catalyses a nucleophilic attack that connects one strand of the leader-proximal repeat to the prespacer 3' overhang. Recognition of the spacer half-site requires DNA bending and leads to full integration. We derive a mechanistic framework to explain the stepwise spacer

  8. Barriers and supports to implementation of MDI/spacer use in nine Canadian pediatric emergency departments: a qualitative study

    Directory of Open Access Journals (Sweden)

    Graham Ian D

    2009-10-01

    Full Text Available Abstract Background Despite recent research supporting the use of metered dose inhalers with spacer devices (MDI/spacers in pediatric emergency departments (PEDs for acute exacerbations of asthma, uptake of this practice has been slow. The objectives of this study were to determine the barriers and supports to implementing MDI/spacer research and to identify factors associated with early and late adoption of MDI/spacers in Canadian PEDs. Methods Using a comparative case study design, we classified nine tertiary care pediatric hospital PEDs based on their stage of implementation. Data were collected using focus group interviews with physicians, registered nurses (RNs, and respiratory therapists (RTs, and individual interviews with both patient care and medical directors at each site. Initial coding was based on the Ottawa Model of Research Use (OMRU categories of elements known to influence the uptake of innovations. Results One hundred and fifty healthcare professionals from nine different healthcare institutions participated in this study. Lack of leadership in the form of a research champion, a lack of consensus about the benefits of MDI/spacers among staff, perceived resistance from patients/parents, and perceived increased cost and workload associated with MDI/spacer use were the most prevalent barriers to the adoption of the MDI/spacer. Common strategies used by early-adopting sites included the active participation of all professional groups in the adoption process in addition to a well-planned and executed educational component for staff, patients, and families. Early adopter sites were also more likely to have the MDI/spacer included in a clinical protocol/pathway. Conclusion Potential barriers and supports to implementation have been identified that will help EDs adopt MDI/spacer use. Future interventions intended to increase MDI/spacer use in PEDs will need to be sensitive to the barriers identified in this study.

  9. Shape-memory-alloy-based smart knee spacer for total knee arthroplasty: 3D CAD modelling and a computational study.

    Science.gov (United States)

    Gautam, Arvind; Callejas, Miguel A; Acharyya, Amit; Acharyya, Swati Ghosh

    2018-03-22

    This study introduced a shape memory alloy (SMA)-based smart knee spacer for total knee arthroplasty (TKA). Subsequently, a 3D CAD model of a smart tibial component of TKA was designed in Solidworks software, and verified using a finite element analysis in ANSYS Workbench. The two major properties of the SMA (NiTi), the pseudoelasticity (PE) and shape memory effect (SME), were exploited, modelled, and analysed for a TKA application. The effectiveness of the proposed model was verified in ANSYS Workbench through the finite element analysis (FEA) of the maximum deformation and equivalent (von Mises) stress distribution. The proposed model was also compared with a polymethylmethacrylate (PMMA)-based spacer for the upper portion of the tibial component for three subjects with body mass index (BMI) of 23.88, 31.09, and 38.39. The proposed SMA -based smart knee spacer contained 96.66978% less deformation with a standard deviation of 0.01738 than that of the corresponding PMMA based counterpart for the same load and flexion angle. Based on the maximum deformation analysis, the PMMA-based spacer had 30 times more permanent deformation than that of the proposed SMA-based spacer for the same load and flexion angle. The SME property of the lower portion of the tibial component for fixation of the spacer at its position was verified by an FEA in ANSYS. Wherein, a strain life-based fatigue analysis was performed and tested for the PE and SME built spacers through the FEA. Therefore, the SMA-based smart knee spacer eliminated the drawbacks of the PMMA-based spacer, including spacer fracture, loosening, dislocation, tilting or translation, and knee subluxation. Copyright © 2018. Published by Elsevier Ltd.

  10. Neoleptonema yongpilii E.-Y. Lee & I.K. Lee, gen. et sp. nov. (Phaeophyceae), based on morphological characters and RuBisCO spacer sequences

    DEFF Research Database (Denmark)

    Lee, E.-Y.; Pedersen, Poul Møller; Lee, I.K.

    2002-01-01

    Elachistaceae, Neoleptonema yongpilii gen. et sp. nov., phylogenetic relationships, plurilocular sporangia, RuBisCO spacer sequences......Elachistaceae, Neoleptonema yongpilii gen. et sp. nov., phylogenetic relationships, plurilocular sporangia, RuBisCO spacer sequences...

  11. LIFE experiment: isolation of cryptoendolithic organisms from Antarctic colonized sandstone exposed to space and simulated Mars conditions on the international space station.

    Science.gov (United States)

    Scalzi, Giuliano; Selbmann, Laura; Zucconi, Laura; Rabbow, Elke; Horneck, Gerda; Albertano, Patrizia; Onofri, Silvano

    2012-06-01

    Desiccated Antarctic rocks colonized by cryptoendolithic communities were exposed on the International Space Station (ISS) to space and simulated Mars conditions (LiFE-Lichens and Fungi Experiment). After 1.5 years in space samples were retrieved, rehydrated and spread on different culture media. Colonies of a green alga and a pink-coloured fungus developed on Malt-Agar medium; they were isolated from a sample exposed to simulated Mars conditions beneath a 0.1 % T Suprasil neutral density filter and from a sample exposed to space vacuum without solar radiation exposure, respectively. None of the other flight samples showed any growth after incubation. The two organisms able to grow were identified at genus level by Small SubUnit (SSU) and Internal Transcribed Spacer (ITS) rDNA sequencing as Stichococcus sp. (green alga) and Acarospora sp. (lichenized fungal genus) respectively. The data in the present study provide experimental information on the possibility of eukaryotic life transfer from one planet to another by means of rocks and of survival in Mars environment.

  12. A comparison of polymerase chain reaction and international organization for standardization methods for determination of Enterobacter sakazakii contamination of infant formulas from Chinese mainland markets.

    Science.gov (United States)

    Ye, Yingwang; Wu, Qingping; Yao, Lin; Dong, Xiaohui; Wu, Kui; Zhang, Jumei

    2009-12-01

    Enterobacter sakazakii is an emerging foodborne pathogen associated with meningitis, necrotizing enterocolitis, and sepsis in infants. One of the main transmission vehicles is the commercially available infant formulas. To provide efficient options and direction for detecting E. sakazakii in infant formulas, evaluation of different polymerase chain reaction (PCR) assays targeting the 16S-23S rDNA internal transcribed spacer (ITS), the ompA gene, and the alpha-1,4-glucosidase gene (gluA) of this organism, were compared to the International Organization for Standardization (ISO) method for detecting E. sakazakii in the 243 commercial infant formula samples. Twelve samples were found to be positive for E. sakazakii by all the PCR assays used, followed by sequencing of PCR products. Ten samples were found to be positive by the ISO method, and all 10 gave positive signals for all the PCR amplifications. In contrast, four false-positive results were generated by single-PCR of the ITS region and one false-positive result targeting the ompA gene, while two false-negative results occurred with the ISO method. Combined with selective enrichment step(s), duplex-PCR targeting ITS and ompA and targeting ompA and gluA genes or single-PCR of the gluA gene can be used to test for contamination by E. sakazakii in infant formulas before they enter the market. PCR techniques will be helpful for routine monitoring and risk assessment for large-scale screenings.

  13. Bladder–Rectum Spacer Balloon in High-Dose-Rate Brachytherapy in Cervix Carcinoma

    Energy Technology Data Exchange (ETDEWEB)

    Rai, Bhavana [Department of Radiotherapy and Oncology, Regional Cancer Centre, Postgraduate Institute of Medical Education and Research, Chandigarh (India); Patel, Firuza D., E-mail: firuzapatel@gmail.com [Department of Radiotherapy and Oncology, Regional Cancer Centre, Postgraduate Institute of Medical Education and Research, Chandigarh (India); Chakraborty, Santam; Sharma, Suresh C.; Kapoor, Rakesh [Department of Radiotherapy and Oncology, Regional Cancer Centre, Postgraduate Institute of Medical Education and Research, Chandigarh (India); Aprem, Abi Santhosh [Corporate R and D Division, HLL Lifecare Limited, Karamana, Trivandrum (India)

    2013-04-01

    Purpose: To compare bladder and rectum doses with the use of a bladder–rectum spacer balloon (BRSB) versus standard gauze packing in the same patient receiving 2 high-dose-rate intracavitary brachytherapy fractions. Methods and Materials: This was a randomized study to compare the reduction in bladder and rectum doses with the use of a BRSB compared with standard gauze packing in patients with carcinoma of the cervix being treated with high-dose-rate intracavitary brachytherapy. The patients were randomized between 2 arms. In arm A, vaginal packing was done with standard gauze packing in the first application, and BRSB was used in the second application. Arm B was the reverse of arm A. The International Commission for Radiation Units and Measurement (ICRU) point doses and doses to 0.1-cm{sup 3}, 1-cm{sup 3}, 2-cm{sup 3}, 5-cm{sup 3}, and 10-cm{sup 3} volumes of bladder and rectum were compared. The patients were also subjectively assessed for the ease of application and the time taken for application. Statistical analysis was done using the paired t test. Results: A total of 43 patients were enrolled; however, 3 patients had to be excluded because the BRSB could not be inserted owing to unfavorable local anatomy. Thus 40 patients (80 plans) were evaluated. The application was difficult in 3 patients with BRSB, and in 2 patients with BRSB the application time was prolonged. There was no significant difference in bladder doses to 0.1 cm{sup 3}, 1 cm{sup 3}, 2 cm{sup 3}, 5 cm{sup 3}, and 10 cm{sup 3} and ICRU bladder point. Statistically significant dose reductions to 0.1-cm{sup 3}, 1-cm{sup 3}, and 2-cm{sup 3} volumes for rectum were observed with the BRSB. No significant differences in 5-cm{sup 3} and 10-cm{sup 3} volumes and ICRU rectum point were observed. Conclusion: A statistically significant dose reduction was observed for small high-dose volumes in rectum with the BRSB. The doses to bladder were comparable for BRSB and gauze packing. Transparent balloons of

  14. Nucleotide sequence of the 18S-26S rRNA intergene region of the sea urchin.

    OpenAIRE

    Hindenach, B R; Stafford, D W

    1984-01-01

    The DNA sequence which spans the internal transcribed spacers of a cloned ribosomal transcription unit from the sea urchin, Lytechinus variegatus, has been determined. The region extends from the conserved Eco RI site near the 3' end of the 18S rDNA to a Bam HI site in the 26S rDNA and includes 232 nucleotides coding for 18S rRNA, 367 nucleotides of internal transcribed spacer, 159 nucleotides coding for 5.8S rRNA, 338 nucleotides of internal transcribed spacer, and 505 nucleotides coding for...

  15. Influence of spacer length on heparin coupling efficiency and fibrinogen adsorption of modified titanium surfaces

    Directory of Open Access Journals (Sweden)

    Gbureck Uwe

    2007-07-01

    Full Text Available Abstract Background Chemical bonding of the drug onto surfaces by means of spacer molecules is accompanied with a reduction of the biological activity of the drug due to a constricted mobility since normally only short spacer molecule like aminopropyltrimethoxysilane (APMS are used for drug coupling. This work aimed to study covalent attachment of heparin to titanium(oxide surfaces by varying the length of the silane coupling agent, which should affect the biological potency of the drug due to a higher mobility with longer spacer chains. Methods Covalent attachment of heparin to titanium metal and TiO2 powder was carried out using the coupling agents 3-(Trimethoxysilyl-propylamine (APMS, N- [3-(Trimethoxysilylpropyl]ethylenediamine (Diamino-APMS and N1- [3-(Trimethoxy-silyl-propyl]diethylenetriamine (Triamino-APMS. The amount of bound coupling agent and heparin was quantified photometrically by the ninhydrin reaction and the tolidine-blue test. The biological potency of heparin was determined photometrically by the chromogenic substrate Chromozym TH and fibrinogen adsorption to the modified surfaces was researched using the QCM-D (Quartz Crystal Microbalance with Dissipation Monitoring technique. Results Zeta-potential measurements confirmed the successful coupling reaction; the potential of the unmodified anatase surface (approx. -26 mV shifted into the positive range (> + 40 mV after silanisation. Binding of heparin results in a strongly negatively charged surface with zeta-potentials of approx. -39 mV. The retaining biological activity of heparin was highest for the spacer molecule Triamino-APMS. QCM-D measurements showed a lower viscosity for adsorbed fibrinogen films on heparinised surfaces by means of Triamino-APMS. Conclusion The remaining activity of heparin was found to be highest for the covalent attachment with Triamino-APMS as coupling agent due to the long chain of this spacer molecule and therefore the highest mobility of the drug

  16. Mechanical evaluation of hip cement spacer reinforcement with stainless steel Kirschner wires, titanium and carbon rods, and stainless steel mesh.

    Science.gov (United States)

    Kaku, Nobuhiro; Tabata, Tomonori; Tsumura, Hiroshi

    2015-04-01

    In two-stage treatments for infections after total hip arthroplasty, antibiotic-loaded cement spacers help treat the infection by antibiotic elution and prevent contraction. However, such spacers are weak and may fracture while awaiting replacement, impairing functionality. We evaluated whether a Kirschner wire (K-wire) mounted into the spacer reinforced its strength along with the effects of the reinforcing material, position, and intensity. Spacers without reinforcing materials constituted the control group. As reinforcing materials, stainless steel K-wires (diameters 3 and 6 mm), titanium alloy and carbon fibers (diameter 3.175 mm), and stainless steel meshes (inner and outer diameters, 6 and 9 mm, respectively) were inserted into the spacer mold before filling with cement. The spacers complied with ISO 7206-4; a compressive load was applied using a testing machine with a velocity of 25.4 mm/min, and the maximum load was recorded. We used 1-3 K-wires positioned on the medial side, lateral side, neck only, and stem only and tested 3 specimens for each condition. The control group withstood the highest load. Stainless steel was the strongest material; 3-mm K-wires in the neck and lateral side withstood a higher load. The computed tomography (CT) imaging revealed a cavity between the K-wires and cement. When K-wires were inserted along the whole length, despite cement fractures, continuity was maintained because of the reinforcing materials. It is difficult to improve the reinforcing strength of spacers using K-wires; however, K-wires prevented dislocation of cement spacer fragments, which can help prevent contraction and facilitate spacer removal during replacement.

  17. On the Origin of Reverse Transcriptase-Using CRISPR-Cas Systems and Their Hyperdiverse, Enigmatic Spacer Repertoires

    Directory of Open Access Journals (Sweden)

    Sukrit Silas

    2017-07-01

    Full Text Available Cas1 integrase is the key enzyme of the clustered regularly interspaced short palindromic repeat (CRISPR-Cas adaptation module that mediates acquisition of spacers derived from foreign DNA by CRISPR arrays. In diverse bacteria, the cas1 gene is fused (or adjacent to a gene encoding a reverse transcriptase (RT related to group II intron RTs. An RT-Cas1 fusion protein has been recently shown to enable acquisition of CRISPR spacers from RNA. Phylogenetic analysis of the CRISPR-associated RTs demonstrates monophyly of the RT-Cas1 fusion, and coevolution of the RT and Cas1 domains. Nearly all such RTs are present within type III CRISPR-Cas loci, but their phylogeny does not parallel the CRISPR-Cas type classification, indicating that RT-Cas1 is an autonomous functional module that is disseminated by horizontal gene transfer and can function with diverse type III systems. To compare the sequence pools sampled by RT-Cas1-associated and RT-lacking CRISPR-Cas systems, we obtained samples of a commercially grown cyanobacterium—Arthrospira platensis. Sequencing of the CRISPR arrays uncovered a highly diverse population of spacers. Spacer diversity was particularly striking for the RT-Cas1-containing type III-B system, where no saturation was evident even with millions of sequences analyzed. In contrast, analysis of the RT-lacking type III-D system yielded a highly diverse pool but reached a point where fewer novel spacers were recovered as sequencing depth was increased. Matches could be identified for a small fraction of the non-RT-Cas1-associated spacers, and for only a single RT-Cas1-associated spacer. Thus, the principal source(s of the spacers, particularly the hypervariable spacer repertoire of the RT-associated arrays, remains unknown.

  18. Similar Results in Children with Asthma for Steady State Pharmacokinetic Parameters of Ciclesonide Inhaled with or without Spacer

    Directory of Open Access Journals (Sweden)

    H. Boss

    2010-01-01

    Full Text Available Background Ciclesonide is an inhaled corticosteroid administered by a metered dose inhaler (MDI to treat bronchial asthma. After inhalation, the inactive ciclesonide is converted by esterases in the airways to active metabolite desisobutyryl-ciclesonide (des-CIC. Aim To compare the pharmacokinetic (PK parameters of des-CIC in children after administration of therapeutic dose of ciclesonide with and without spacer (AeroChamber Plus™. Methods Open-label, 3 period, cross over, repeated dose, PK study in 37 children with mild to moderate stable asthma (age: 6–11 y; body weight: 20–53 kg. During each 7-day treatment period, ciclesonide was inhaled once in the morning: A 160 μg MDI with spacer, B 80 μg MDI with spacer, and C 160 μg MDI without spacer. Serum PK parameters of ciclesonide and des-CIC were determined on Day 7 of each period. The primary PK parameters were the AUC τ and C max for des-CIC. Results Inhaling ciclesonide with spacer led to a dose proportional systemic exposure (AUC τ of des-CIC (0.316 μg*h/L for 80 μg and 0.663 μg*h/L for 160 μg. The dose-normalized systemic exposure for des-CIC (based on AUC τ was 27% higher after inhalation of ciclesonide 80 μg or 160 μg with spacer than without spacer; the corresponding C max values for des-CIC were, respectively, 63% and 55% higher with spacer. No clinically relevant abnormalities or adverse drug reactions were observed. Conclusions Inhalation of therapeutic ciclesonide dose with spacer led to a slight increase in the systemic exposure of des-CIC, which does not warrant dose adjustment.

  19. A comparative evaluation of application techniques of a paint-on die spacer in grooves: an in vitro study.

    Science.gov (United States)

    Vaishali, K; Prasad, D Krishna; Shetty, Manoj

    2013-12-01

    The use of paint-on die spacer to improve the seating of casting has become quite popular in the recent years. The generally accepted range of paint-on die spacer is approximately 20-40 μm, which suggests a range of tolerance. The painting of the retentive grooves with die spacer has always been a subject of debate. The primary purpose of this study was to determine if there was a tendency for the paint-on die spacer to accumulate in grooves of tooth preparation in sufficient thickness to exceed this accepted range of tolerance when applied using two different techniques. Eight die stone blocks with three grooves each were prepared. Half the samples were painted in unidirectional method and the other halves were painted using the haphazard method of application. The thickness of the die spacer was measured at different positions using 200× magnification and the mean and standard deviations were calculated. On analysis it was seen that the thickness of the paint-on die spacer in grooves was in the range of 20-40 μm for unidirectional method of application, whereas in haphazard method of application the thickness of the paint-on die spacer was in the range of 28-132 μm. From the above study it was concluded that the method of application influenced the thickness of the paint-on die spacer. The recommended thickness of the die spacer was achieved on unidirectional method of application.

  20. Isolation of oogenesis-specific genes transcribed in the germ-line of Calliphora erythrocephala and Drosophila melanogaster

    International Nuclear Information System (INIS)

    Tucker, M.A.

    1988-01-01

    Poly(A) + RNA from early or mid-stage ovarian follicles of C. erythrocephala was used to generate radiolabelled oogenesis-specific cDNA probes for screening the phage libraries. A cDNA probe made from mid-stage embryo poly(A) + RNA was used as the differential screening probe. Thus plaques hybridizing to the two oogenesis-specific probes but not the mid-stage embryo probe were selected as potentially containing oogenesis-specific genes. Two further rounds of screening were used to eliminate false positives and, after plaque purification, restriction digests of the remaining clones were screened by Southern blot hybridization to identify DNA fragments transcribed in an oogenesis-specific manner. In situ hybridization to sections of ovarian follicles has been used to determine the cell types within the follicles in which the various genes are expressed. Radiolabelled RNA probes for four of the C. erythrocephala oogenesis-specific clones and the two D. melanogaster clones have been hybridized to ovarian follicles. Further studies have been concentrated on the two germ-line transcribed, oogenesis-specific clones isolated from the D. melanogaster clone library. Detailed genetic mapping of the DA clone and of these mutations was performed to determine which mutations might represent the DA gene. cDNA clones have been isolated for the transcribed region of clone DA and have been used to further define the transcription unit from this region of the D. melanogaster genome

  1. Spacer layer effect and microstructure on multi-layer [NdFeB/Nb]n films

    International Nuclear Information System (INIS)

    Tsai, J.-L.; Yao, Y.-D.; Chin, T.-S.; Kronmueller, H.

    2002-01-01

    Spacer layer effect on multi-layer [NdFeB/Nb] n films has been investigated from the variation of magnetic properties and microstructure of the films. From a HRTEM cross-section view observation, the average grain size of [NdFeB/Nb] n multi-layers was controlled by both annealing temperature and thickness of NdFeB layer. Selected area diffraction pattern indicated that the structure of Nb spacer layer was amorphous. The grain size and coercivity of [NdFeB x /Nb] n films change from 50 nm and 16.7 kOe to 167 nm and 9 kOe for films with x=40 nm, n=10 and x=200 nm, n=2, respectively

  2. Synthesis, Characterization and Biological Studies of New Linear Thermally Stable Schiff Base Polymers with Flexible Spacers.

    Science.gov (United States)

    Qureshi, Farah; Khuhawar, Muhammad Yar; Jahangir, Taj Muhammad; Channar, Abdul Hamid

    2016-01-01

    Five new linear Schiff base polymers having azomethine structures, ether linkages and extended aliphatic chain lengths with flexible spacers were synthesized by polycondensation of dialdehyde (monomer) with aliphatic and aromatic diamines. The formation yields of monomer and polymers were obtained within 75-92%. The polymers with flexible spacers of n-hexane were somewhat soluble in acetone, chloroform, THF, DMF and DMSO on heating. The monomer and polymers were characterized by melting point, elemental microanalysis, FT-IR, (1)HNMR, UV-Vis spectroscopy, thermogravimetry (TG), differential thermal analysis (DTA), fluorescence emission, scanning electron microscopy (SEM) and viscosities and thermodynamic parameters measurements of their dilute solutions. The studies supported formation of the monomer and polymers and on the basis of these studies their structures have been assigned. The synthesized polymers were tested for their antibacterial and antifungal activities.

  3. Effect of spacer layer on the magnetization dynamics of permalloy/rare-earth/permalloy trilayers

    International Nuclear Information System (INIS)

    Luo, Chen; Yin, Yuli; Zhang, Dong; Jiang, Sheng; Yue, Jinjin; Zhai, Ya; Du, Jun; Zhai, Hongru

    2015-01-01

    The permalloy/rare-earth/permalloy trilayers with different types (Gd and Nd) and thicknesses of spacer layer are investigated using frequency dependence of ferromagnetic resonance (FMR) measurements at room temperature, which shows different behaviors with different rare earth spacer layers. By fitting the frequency dependence of the FMR resonance field and linewidth, we find that the in-plane uniaxial anisotropy retains its value for all samples, the perpendicular anisotropy remains almost unchanged for different thickness of Gd layer but the values are tailored by different thicknesses of Nd layer. The Gilbert damping is almost unchanged with different thicknesses of Gd; however, the Gilbert damping is significantly enhanced from 8.4×10 −3 to 20.1×10 −3 with 6 nm of Nd and then flatten out when the Nd thickness rises above 6 nm

  4. Multilayer barrier films comprising nitrogen spacers between free-standing barrier layers

    Science.gov (United States)

    Granstrom, Jimmy; Villet, Michael; Chatterjee, Tirtha; Gerbec, Jeffrey A.; Jerkunica, Evan; Roy, Anshuman

    2009-08-01

    An encapsulation architecture for organic electronic devices utilizing nitrogen gas-phase spacers between free-standing barrier films is demonstrated. The nitrogen spacers act as sinks for permeating H2O and O2, delaying establishment of steady-state chemical potential gradients across the barriers and thereby reducing permeation rates. Water vapor transmission through nitrogen-spaced barriers was measured via the calcium optical transmission test. Substantial reductions in permeation rate were observed for a variety of barrier materials and configurations, suggesting a general and cost-effective approach for improving encapsulation performance. A low-cost polyethylene terephthalate film increases the calcium lifetime of a Cytop™-Kureha structure from 7000 to 12000 min.

  5. Transcriptome changes in STSV2-infected Sulfolobus islandicus REY15A undergoing continuous CRISPR spacer acquisition

    DEFF Research Database (Denmark)

    León-Sobrino, Carlos; Kot, Witold P; Garrett, Roger A

    2016-01-01

    A transcriptome study was performed on Sulfolobus islandicus REY15A actively undergoing CRISPR spacer acquisition from the crenarchaeal monocaudavirus STSV2 in rich and basal media over a 6 day period. Spacer acquisition preceded strong host growth retardation, altered transcriptional activity...... of four different CRISPR-Cas modules and changes in viral copy numbers, and with significant differences in the two media. Transcript levels of proteins involved in the cell cycle were reduced, while those of DNA replication, DNA repair, transcriptional regulation, and some antitoxin-toxin pairs...... and transposases were unchanged or enhanced. Antisense RNAs were implicated in the transcriptional regulation of adaptation and interference modules of the type I-A CRISPR-Cas system and evidence was found for the occurrence of functional coordination between the single CRISPR-Cas adaptation module...

  6. Development and Manufacture of the Coil End Spacers of the LHC Pre-series Dipoles

    CERN Document Server

    Farina, E; Perini, D; Schiappapietra, A; Seneé, L

    2002-01-01

    The coil end spacers play an important role in the performance of superconducting coils, as their shape and location determine the mechanical stability of the conductors in the coil ends (and hence the overall coil training performance) and the local field quality. The dipole end spacers are often of a size and a geometry difficult to be industrially series manufactured and measured. Efficiency of the production and related costs are a key issue to achieve the required production rate of the LHC main dipoles at an affordable price. For the latter reasons, a design approach integrating state-of-the-art CAD/CAM optimization techniques allowing to considerably decrease design and machining time was implemented. This paper gives examples and describes the design criteria, the computation methods, the machining and measuring procedures adopted to carry out the pre-series production.

  7. Novel electromagnetic technique for repositioning of coolant tube spacers in CANDU nuclear reactors

    Science.gov (United States)

    Dableh, Joseph H.

    1986-06-01

    A novel electromagnetic technique to reposition the coolant tube spacers in the fuel channels of CANDU nuclear reactors was successfully developed in the fall of 1983 at Ontario Hydro Research Division. The need to reposition dislocated spacers in noncommissioned reactors was discovered subsequent to the rupture of a pressure tube in one reactor at the Pickering Nuclear Generator Station in Ontario. A contributing factor to the failure of the tube was the fact that the annular spacers (garter springs), used to maintain the coaxial configuration between the pressure tube and its surrounding calandria tube, had been displaced longitudinally for a number of years. Subsequent to this finding, it was discovered that a number of garter springs in noncommissioned nuclear reactors were displaced due to vibration induced by various sources during the construction stage. Since the garter springs are not directly accessible by mechanical means, extensive dismantling of the fuel channels would have been necessary to reposition the springs in their designated locations. This paper describes a novel method to reposition the garter springs without dismantling the fuel channels. The method consists of exerting a force on the springs in the direction of the required displacement by applying a large electromagnetic impulse (generated by a 200-kJ capacitor bank) to a drive coil inserted into the pressure tube opposite the spacer. The repositioning of displaced garter springs in five new reactors in Ontario has been carried out successfully in 1984. The saving in reactor repair cost, interest charges, and replacement energy cost was on the order of hundreds of millions of dollars. Equally large benefits and savings will be realized if the need to use this technique in commissioned reactors arises. Also, the related development of strong compact coils and low-resistance pulse power cable have significant implications and advantages in various other applications related to the pulse

  8. Silver-graphene oxide based plasmonic spacer for surface plasmon-coupled fluorescence emission enhancements

    Science.gov (United States)

    Badiya, Pradeep Kumar; Srinivasan, Venkatesh; Sathish Ramamurthy, Sai

    2017-06-01

    We report the application of single layered graphene oxide (SLGO) and silver decorated SLGO (Ag-SLGO) as plasmonic spacer material for obtaining enhanced fluorescence from a Rhodamine 6G (Rh6G) radiating dipole in a surface plasmon-coupled emission platform. To this end, we have decorated SLGO with biphasic silver nanoparticles using an in situ deposition technique to achieve 112-fold fluorescence enhancements.

  9. Photo-induced antiferromagnetic interlayer coupling in Fe superlattices with iron silicide spacers

    Energy Technology Data Exchange (ETDEWEB)

    Mattson, J.E.; Fullerton, E.E.; Kumar, S.; Lee, S.R.; Sowers, C.H.; Grimsditch, M.; Bader, S.D. [Argonne National Lab., IL (United States); Parker, F.T. [California Univ., San Diego, La Jolla, CA (United States). Center for Magnetic Recording Research

    1993-09-01

    Sputtered Fe/FeSi films possessing antiferromagnetic (AF) interlayer coupling at room temperature develop ferromagnetic remanence when cooled below 100K, but the AF coupling can be restored at low temperature by exposure to visible light of sufficient intensity (>10 mW/mm{sup 2}). We attribute these effects to charge carriers in the FeSi spacer layer which, when thermally or photo-generated, are capable of communicating spin information between the Fe layers.

  10. Experimental benchmark data for PWR rod bundle with spacer-grids

    Energy Technology Data Exchange (ETDEWEB)

    Dominguez-Ontiveros, Elvis E. [Nuclear Engineering Department, Texas A and M University, College Station, TX 77843-3133 (United States); Hassan, Yassin A., E-mail: y-hassan@tamu.edu [Nuclear Engineering Department, Texas A and M University, College Station, TX 77843-3133 (United States); Conner, Michael E.; Karoutas, Zeses [Westinghouse Nuclear Fuel, 5801 Bluff Road, Columbia, SC 29209 (United States)

    2012-12-15

    In numerical simulations of fuel rod bundle flow fields, the unsteady Navier-Stokes equations have to be solved in order to determine the time (phase) dependent characteristics of the flow. In order to validate the simulations results, detailed comparison with experimental data must be done. Experiments investigating complex flows in rod bundles with spacer grids that have mixing devices (such as flow mixing vanes) have mostly been performed using single-point measurements. In order to obtain more details and insight on the discrepancies between experimental and numerical data as well as to obtain a global understanding of the causes of these discrepancies, comparisons of the distributions of complete phase-averaged velocity and turbulence fields for various locations near spacer-grids should be performed. The experimental technique Particle Image Velocimetry (PIV) is capable of providing such benchmark data. This paper describes an experimental database obtained using two-dimensional Time Resolved Particle Image Velocimetry (TR-PIV) measurements within a 5 Multiplication-Sign 5 PWR rod bundle with spacer-grids that have flow mixing vanes. One of the unique characteristic of this set-up is the use of the Matched Index of Refraction technique employed in this investigation to allow complete optical access to the rod bundle. This unique feature allows flow visualization and measurement within the bundle without rod obstruction. This approach also allows the use of high temporal and spatial non-intrusive dynamic measurement techniques namely TR-PIV to investigate the flow evolution below and immediately above the spacer. The experimental data presented in this paper includes explanation of the various cases tested such as test rig dimensions, measurement zones, the test equipment and the boundary conditions in order to provide appropriate data for comparison with Computational Fluid Dynamics (CFD) simulations. Turbulence parameters of the obtained data are presented

  11. A new spacer-guided, PCL balancing technique for cruciate-retaining total knee replacement.

    Science.gov (United States)

    Heesterbeek, P J C; Labey, L; Wong, P; Innocenti, B; Wymenga, A B

    2014-03-01

    The goal of this study was to investigate whether a new posterior cruciate ligament (PCL) balancing approach with a spacer technique during total knee arthroplasty (TKA) reproduced the correct tibiofemoral contact point (CP) location. It was hypothesized that it should be possible to adequately balance the PCL with this geometrical technique, obtaining correct position and stability of the medial femoral condyle, independent of insert shape. Nine fresh-frozen full-leg cadaver specimens were used. After native testing, prototype components of a new PCL-retaining implant were implanted using navigation and a bone-referencing technique. After finishing the bone cuts, the spacer technique was used to ascertain balancing of the PCL and the tibial cut was corrected if necessary. Passive and squat motions were performed before and after TKA using a dynamic knee simulator while tibiofemoral kinematics were recorded using six infrared cameras. CPs (native and implant) were calculated as the projections of the femoral condylar centres on the horizontal plane of the tibia. The spacer technique resulted in correct PCL balancing in all specimens. The kinematic patterns of native and replaced knees showed no statistically significant differences in passive and squat motions. The medial CP after TKA was at the same position as in the native knee. No paradoxical sliding forward was seen after TKA, supporting our hypothesis. The spacer technique can be applied by surgeons during PCL-retaining TKA and will lead to good PCL balancing, indicated by a correct CP, no lift-off in flexion and no posterior sag.

  12. Apparatus for steam generator tube wrapper spacer and support block removal

    International Nuclear Information System (INIS)

    Calhoun, G.L.; Cassette, A.J.

    1982-01-01

    A cutting torch is described that may be used to cut through the spacers and the support blocks in the annulus between the outer shell of a steam generator and a tube bundle wrapper. The torch is supported by a multi-section column made up of a number of interlocked separable aluminum channel sections carried by a motorized carriage movable vertically along a rack and guide member clamped to the wrapper

  13. Experimental benchmark data for PWR rod bundle with spacer-grids

    International Nuclear Information System (INIS)

    Dominguez-Ontiveros, Elvis E.; Hassan, Yassin A.; Conner, Michael E.; Karoutas, Zeses

    2012-01-01

    In numerical simulations of fuel rod bundle flow fields, the unsteady Navier–Stokes equations have to be solved in order to determine the time (phase) dependent characteristics of the flow. In order to validate the simulations results, detailed comparison with experimental data must be done. Experiments investigating complex flows in rod bundles with spacer grids that have mixing devices (such as flow mixing vanes) have mostly been performed using single-point measurements. In order to obtain more details and insight on the discrepancies between experimental and numerical data as well as to obtain a global understanding of the causes of these discrepancies, comparisons of the distributions of complete phase-averaged velocity and turbulence fields for various locations near spacer-grids should be performed. The experimental technique Particle Image Velocimetry (PIV) is capable of providing such benchmark data. This paper describes an experimental database obtained using two-dimensional Time Resolved Particle Image Velocimetry (TR-PIV) measurements within a 5 × 5 PWR rod bundle with spacer-grids that have flow mixing vanes. One of the unique characteristic of this set-up is the use of the Matched Index of Refraction technique employed in this investigation to allow complete optical access to the rod bundle. This unique feature allows flow visualization and measurement within the bundle without rod obstruction. This approach also allows the use of high temporal and spatial non-intrusive dynamic measurement techniques namely TR-PIV to investigate the flow evolution below and immediately above the spacer. The experimental data presented in this paper includes explanation of the various cases tested such as test rig dimensions, measurement zones, the test equipment and the boundary conditions in order to provide appropriate data for comparison with Computational Fluid Dynamics (CFD) simulations. Turbulence parameters of the obtained data are presented in order to gain

  14. Similar rate of infection eradication for functional articulating, prefabricated and custom-made spacers in 2-stage revision of the infected total hip: a literature review.

    Science.gov (United States)

    Veltman, Ewout S; Moojen, Dirk Jan F; Glehr, Mathias; Poolman, Rudolf W

    2016-07-25

    2-stage revision with the use of an antibiotic-loaded interval spacer is therapy of choice in late periprosthetic joint infection for most surgeons. For the spacer, either a prefabricated, functional articulating or custom-made spacer can be used. Little is known about which type of spacer provides optimal outcome after 2-stage revision. The aim of this study was to determine which type of spacer provides the best results, when used in 2-stage revision of an infected THA. We performed a systematic review of the literature to analyse which type of interval spacer provides highest infection eradication rate and best functional outcome after a minimum 2 year follow-up. Exclusion criteria were follow-up of less than 2 years, single-stage revision, or 2-stage revision without use of a spacer. 25 studies were included. Infection eradication rate was similar with rates of 96%, 93% and 95% for the prefabricated-, functional articulating- and custom-made spacers respectively. Functional outcome was scarcely described. Postoperative HHS was 81, 90 and 83 respectively. Functional articulating spacers achieve a comparable rate of infection eradication in the treatment of periprosthetic hip joint infections as compared to preformed or custom-made antibiotic-loaded spacers. There is insufficient evidence concerning rehabilitation and functional outcome after 2-stage revision hip arthroplasty to advocate or discourage the use of either kind of interval spacer.

  15. Cas4 Facilitates PAM-Compatible Spacer Selection during CRISPR Adaptation

    Directory of Open Access Journals (Sweden)

    Sebastian N. Kieper

    2018-03-01

    Full Text Available Summary: CRISPR-Cas systems adapt their immunological memory against their invaders by integrating short DNA fragments into clustered regularly interspaced short palindromic repeat (CRISPR loci. While Cas1 and Cas2 make up the core machinery of the CRISPR integration process, various class I and II CRISPR-Cas systems encode Cas4 proteins for which the role is unknown. Here, we introduced the CRISPR adaptation genes cas1, cas2, and cas4 from the type I-D CRISPR-Cas system of Synechocystis sp. 6803 into Escherichia coli and observed that cas4 is strictly required for the selection of targets with protospacer adjacent motifs (PAMs conferring I-D CRISPR interference in the native host Synechocystis. We propose a model in which Cas4 assists the CRISPR adaptation complex Cas1-2 by providing DNA substrates tailored for the correct PAM. Introducing functional spacers that target DNA sequences with the correct PAM is key to successful CRISPR interference, providing a better chance of surviving infection by mobile genetic elements. : Kieper et al. demonstrate that the ubiquitous protein Cas4 assists Cas1 and Cas2 in the selection of new CRISPR spacers with a PAM licensing efficient CRISPR interference. Keywords: CRISPR adaptation, Cas4, spacer acquisition, type I-D CRISPR-Cas system

  16. Design, Synthesis and Hydrolytic Behavior of Mutual Prodrugs of NSAIDs with Gabapentin Using Glycol Spacers

    Directory of Open Access Journals (Sweden)

    Hiba Najeh Alsaad

    2012-10-01

    Full Text Available The free –COOH present in NSAIDs is thought to be responsible for the GI irritation associated with all traditional NSAIDs. Exploitation of mutual prodrugs is an approach wherein the NSAID is covalently bounded to a second pharmacologically active carrier/drug with the ultimate aim of reducing the gastric irritation. In this study some NSAIDs were conjugated with gabapentin via ester bonds using glycol spacers with the expectation of reducing gastric adverse effects and obtaining synergistic analgesic effects. The kinetics of ester hydrolysis were studied in two different non enzymatic buffer solutions at pH 1.2 and 7.4, as well as in 80% human plasma using HPLC with chloroform -methanol as mobile phase. Compounds 9a–c with ethylene glycol spacers showed significant stability at buffer solutions with half lives ranging from about 8–25 h, while the underwent a reasonable plasma hydrolysis (49%–88% in 2 h. Compound 9d with a propylene glycol spacer shows a higher rate of enzymatic hydrolysis than the corresponding ethylene glycol compound 9c. The result of compounds 9a-c indicate that these compounds may be stable during their passage through the GIT until reaching the blood circulation.

  17. Procedure for vibration test of the fuel rod supported by spacer grids

    International Nuclear Information System (INIS)

    Choi, Myoung Hwan; Kang, Heung Seok; Yoon, Kyung Ho; Kim, Hyung Kyu; Song, Kee Nam

    2002-07-01

    One of the methods that are used to compare and verify the supporting performance of the spacer grids developed is the vibration characteristic test. In this report there are two aims. One is of the understand of the experimental method and procedure performing the modal testing using I-DEAS TDAS module. The other is the investigation of the vibration behaviors of a dummy fuel rod supported by 8 optimized H type spacer grids. This report describes the method and procedure of modal testing to obtain the vibration characteristics such as amplitudes, natural frequencies and mode shapes of the fuel rod using a shaker, a non-contact gap sensor and an accelerometer. This report provides a test procedure in detail so that anyone can be easily understood and use the I-DEAS TDAS program. The I-DEAS TDAS program related to the modal testing has several tasks including the Modal analysis, Signal Processing et al.. This report includes model preparation to prepare the geometrical model, Signal Processing (Sine/Standard measurement) to acquire the signal, Modal analysis to obtain the frequencies and mode shapes, Correlation to analyze the relation between the test and FE analysis and Post Processing tasks. In addition, this report contains the actual test and analysis data of a dummy fuel rod in length 3847mm supported by 8 optimized H type spacer grids

  18. Finite element analysis of the contact between fuel rod and spacer grid

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyung Kyu; Kim, Young Koon; Kang, Heung Seok; Yoon, Kyung Ho; Song, Kee Nam [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-01-01

    For the research on the fretting failure problem of nuclear fuel, the contact length and normal stress field are evaluated for the contact between fuel rod and spacer grid by using the Finite Element Method (FEM). An assumption of semi-infiniteness is necessary for applying the Contact Mechanics which is based on the classical theory of elasticity to the present problem. For the contact problem of fuel fretting, the contact mechanical solutions could be utilized well with sufficient accuracy if the contact bodies (i.e., the cladding tube and the spacer grid) can be assumed as semi-infinite bodies. To this end, the contact length evaluated by FEM is discussed together with the relevant research which concerned the effect of dimension for the validity of the assumption of semi-infiniteness. Normal stress profile on the contact is also studied through comparing the theoretical and the FE results. For the analysis of contact problem by FEM, ANSYS code (Version 5.3) is utilized and the geometry is chosen to be the Hertzian (cylinder-to-cylinder), the strip-to-cylinder and the fuel rod/spacer grid contact (strip-to-tube). Present research will be utilized for accessing the fuel fretting problem by FEM together with the theoretical (i.e., contact mechanical) analysis which has been published as KAERI/TR-1113/98. (author). 15 refs., 44 figs., 4 tabs.

  19. A data-mining approach to spacer oligonucleotide typing of Mycobacterium tuberculosis.

    Science.gov (United States)

    Sebban, M; Mokrousov, I; Rastogi, N; Sola, C

    2002-02-01

    The Direct Repeat (DR) locus of Mycobacterium tuberculosis is a suitable model to study (i) molecular epidemiology and (ii) the evolutionary genetics of tuberculosis. This is achieved by a DNA analysis technique (genotyping), called sp acer oligo nucleotide typing (spoligotyping ). In this paper, we investigated data analysis methods to discover intelligible knowledge rules from spoligotyping, that has not yet been applied on such representation. This processing was achieved by applying the C4.5 induction algorithm and knowledge rules were produced. Finally, a Prototype Selection (PS) procedure was applied to eliminate noisy data. This both simplified decision rules, as well as the number of spacers to be tested to solve classification tasks. In the second part of this paper, the contribution of 25 new additional spacers and the knowledge rules inferred were studied from a machine learning point of view. From a statistical point of view, the correlations between spacers were analyzed and suggested that both negative and positive ones may be related to potential structural constraints within the DR locus that may shape its evolution directly or indirectly. By generating knowledge rules induced from decision trees, it was shown that not only the expert knowledge may be modeled but also improved and simplified to solve automatic classification tasks on unknown patterns. A practical consequence of this study may be a simplification of the spoligotyping technique, resulting in a reduction of the experimental constraints and an increase in the number of samples processed.

  20. Insufficient sensitivity of joint aspiration during the two-stage exchange of the hip with spacers.

    Science.gov (United States)

    Boelch, Sebastian Philipp; Weissenberger, Manuel; Spohn, Frederik; Rudert, Maximilian; Luedemann, Martin

    2018-01-10

    Evaluation of infection persistence during the two-stage exchange of the hip is challenging. Joint aspiration before reconstruction is supposed to rule out infection persistence. Sensitivity and specificity of synovial fluid culture and synovial leucocyte count for detecting infection persistence during the two-stage exchange of the hip were evaluated. Ninety-two aspirations before planned joint reconstruction during the two-stage exchange with spacers of the hip were retrospectively analyzed. The sensitivity and specificity of synovial fluid culture was 4.6 and 94.3%. The sensitivity and specificity of synovial leucocyte count at a cut-off value of 2000 cells/μl was 25.0 and 96.9%. C-reactive protein (CRP) and erythrocyte sedimentation rate (ESR) values were significantly higher before prosthesis removal and reconstruction or spacer exchange (p = 0.00; p = 0.013 and p = 0.039; p = 0.002) in the infection persistence group. Receiver operating characteristic area under the curve values before prosthesis removal and reconstruction or spacer exchange for ESR were lower (0.516 and 0.635) than for CRP (0.720 and 0.671). Synovial fluid culture and leucocyte count cannot rule out infection persistence during the two-stage exchange of the hip.

  1. Sub-22 nm silicon template nanofabrication by advanced spacer patterning technique for NIL applications

    Science.gov (United States)

    Park, Jong-Moon; Park, Kun-Sik; Kim, Dong-Pyo; Yoo, Seong-Ook; Lee, Jin-Ho

    2013-03-01

    A spacer patterning technique using a poly-Si micro-feature and a SiO2 spacer has been demonstrated to achieve sub-22 nm structures with conventional semiconductor equipments. The sub-22 nm structures have been fabricated by a plasma etching of Si substrate with a spacer oxide mask of which dimension is accurately controlled by the deposited film thickness. The profile of the Si nano-feature was influenced by an O2 flow rate during Si etching in inductively coupled plasma (ICP). As the O2 flow rate was decreased, the etch profile was improved vertically even though the etch rate of Si was slightly decreased. We obtained a 6-inch Si template with both nano- and micro-features of positive shape used for a master mold in nanoimprint lithography (NIL). The nano-sized Si features showed 22-nm width and 145-nm height with the slope of 87°. Further size reduction by anisotropic wet etching with KOH solution was also investigated.

  2. Unsteadiness and transition to turbulence in woven spacer filled channels for Membrane Distillation

    Science.gov (United States)

    Ciofalo, M.; Ponzio, F.; Tamburini, A.; Cipollina, A.; Micale, G.

    2017-01-01

    To characterize the performance of Membrane Distillation (MD) modules, channels filled with woven spacers were investigated by Computational Fluid Dynamics (including Direct Numerical Simulations and the use of the SST k-ω turbulence model) and by parallel experiments with Thermochromic Liquid Crystals. The cases considered here regard mutually orthogonal filaments with a spacer pitch to channel height ratio P/H=2, two spacer orientations θ with respect to the main flow (0° and 45°), and bulk Reynolds numbers Re from ∼200 to ∼2000, an interval of great interest in practical MD applications. For both values of θ, CFD predicted steady-state flow for Re up to ∼300, and chaotic flow for Re larger than ∼400. In the intermediate range Re≈300-400, periodic flow regimes were predicted for both orientations. These regimes were of particular interest and complexity, as they exhibited a slow global oscillation of the flow superimposed on high order harmonics corresponding to fast local oscillations. Experiments confirmed the appearance of unsteadiness for Re>∼300. Heat transfer and friction were little affected by unsteadiness and exhibited a smooth behaviour with Re. The agreement with the experimental results was good using DNS, and acceptable using RANS.

  3. Interaction between zircaloy tube and inconel spacer grid at high temperature

    International Nuclear Information System (INIS)

    Nagase, Fumihisa; Otomo, Takashi; Uetsuka, Hiroshi; Furuta, Teruo

    1990-09-01

    In order to investigate the interaction between fuel cladding and spacer grid of the pressurized water reactor during a severe accident, isothermal reaction tests were performed at the temperature range from 1248 to 1673K. A specimen consisted of a short Zircaloy-4 cladding tube and a piece of spacer grid of Inconel-718. In the tests in an argon atmosphere, eutectic reaction between Zircaloy and Inconel was observed at the contact points at 1248K. Rapid reaction was observed at higher test temperatures. For example, in the test at 1373K for 300s, Zircaloy reacted with Inconel over the entire thickness (0.62mm) of the tube in the vicinity of the contact point. In the present tests, Zircaloy which has higher melting point than Inconel was dissolved preferentially due to eutectic formation. In the tests in an oxygen atmosphere, no eutectic reaction was observed at temperatures below 1437K. A trace of interaction was found at the contact point of specimen heated at 1573 and 1623K. However, decrease in Zircaloy thickness was not measured. The possibility of eutectic reaction between Zircaloy cladding and Inconel spacer grid seems to be quite limited when sufficient oxygen is supplied. (author)

  4. Design, synthesis and hydrolytic behavior of mutual prodrugs of NSAIDs with gabapentin using glycol spacers.

    Science.gov (United States)

    Mahdi, Monther Faisal; Alsaad, Hiba Najeh

    2012-10-12

    The free –COOH present in NSAIDs is thought to be responsible for the GI irritation associated with all traditional NSAIDs. Exploitation of mutual prodrugs is an approach wherein the NSAID is covalently bounded to a second pharmacologically active carrier/drug with the ultimate aim of reducing the gastric irritation. In this study some NSAIDs were conjugated with gabapentin via ester bonds using glycol spacers with the expectation of reducing gastric adverse effects and obtaining synergistic analgesic effects. The kinetics of ester hydrolysis were studied in two different non enzymatic buffer solutions at pH 1.2 and 7.4, as well as in 80% human plasma using HPLC with chloroform -methanol as mobile phase. Compounds 9a–c with ethylene glycol spacers showed significant stability at buffer solutions with half lives ranging from about 8–25 h, while the underwent a reasonable plasma hydrolysis (49%–88%) in 2 h. Compound 9d with a propylene glycol spacer shows a higher rate of enzymatic hydrolysis than the corresponding ethylene glycol compound 9c. The result of compounds 9a-c indicate that these compounds may be stable during their passage through the GIT until reaching the blood circulation.

  5. Successful treatment of extensively drug-resistant Pseudomonas aeruginosa osteomyelitis using a colistin- and tobramycin-impregnated PMMA spacer.

    Science.gov (United States)

    Krajewski, Jochen; Bode-Böger, Stefanie M; Tröger, Uwe; Martens-Lobenhoffer, Jens; Mulrooney, Thomas; Mittelstädt, Hagen; Russlies, Martin; Kirchner, Rainer; Knobloch, Johannes K-M

    2014-10-01

    Discovered in 1949, the antibiotic colistin was initially used for therapeutic purposes. Parenteral use of colistin was gradually abandoned because of its side-effect profile, especially its nephrotoxicity and neurotoxicity. Despite the risk of these potentially serious adverse effects, increasing resistance of Gram-negative bacteria has led to a renaissance of intravenous use of colistin in the last few years. Local administration of colistin is an alternative method to minimise the risk of systemic toxicity. We present a case of extensively drug-resistant Pseudomonas aeruginosa osteomyelitis treated successfully with high-dose colistin- and tobramycin-impregnated bone cement as a drug delivery vehicle. For the first time, local colistin concentrations in drainage and synovial fluid were quantified in order to determine the optimal dose and to minimise serious side effects. Insertion of a bone cement spacer loaded with a high dose of tobramycin and colistin resulted in local colistin levels at the infection site that exceeded the minimum inhibitory concentration (MIC) of colistin against the isolated P. aeruginosa five-fold on Day 4. Thus, the treatment may be expected to exert a prolonged effect. Whereas systemic administration of colistin alone was not sufficient to treat the infection, combined local and parenteral therapy led to eradication of P. aeruginosa in this patient. Plasma colistin levels remained in the therapeutic range, which confirms the systemic safety of the method. Copyright © 2014 Elsevier B.V. and the International Society of Chemotherapy. All rights reserved.

  6. Does Semi-Rigid Instrumentation Using Both Flexion and Extension Dampening Spacers Truly Provide an Intermediate Level of Stabilization?

    Directory of Open Access Journals (Sweden)

    Dilip Sengupta

    2013-01-01

    Full Text Available Conventional posterior dynamic stabilization devices demonstrated a tendency towards highly rigid stabilization approximating that of titanium rods in flexion. In extension, they excessively offload the index segment, making the device as the sole load-bearing structure, with concerns of device failure. The goal of this study was to compare the kinematics and intradiscal pressure of monosegmental stabilization utilizing a new device that incorporates both a flexion and extension dampening spacer to that of rigid internal fixation and a conventional posterior dynamic stabilization device. The hypothesis was the new device would minimize the overloading of adjacent levels compared to rigid and conventional devices which can only bend but not stretch. The biomechanics were compared following injury in a human cadaveric lumbosacral spine under simulated physiological loading conditions. The stabilization with the new posterior dynamic stabilization device significantly reduced motion uniformly in all loading directions, but less so than rigid fixation. The evaluation of adjacent level motion and pressure showed some benefit of the new device when compared to rigid fixation. Posterior dynamic stabilization designs which both bend and stretch showed improved kinematic and load-sharing properties when compared to rigid fixation and when indirectly compared to existing conventional devices without a bumper.

  7. Effect of electrostatic charge in plastic spacers on the lung delivery of HFA-salbutamol in children

    DEFF Research Database (Denmark)

    Anhøj, J; Bisgaard, H; Lipworth, B J

    1999-01-01

    was delivered on 3 different study days from plastic spacers with mouthpiece. Pre-treatment of the spacers differed between study days: (a) Non-electrostatic 350 ml Babyhaler (coated with benzalkonium chloride) (b) New 350 ml Babyhaler (rinsed in water), and (c) New 145 ml AeroChamber (rinsed in water). Plasma......AIMS: The effect of the electrostatic charge in plastic spacers in vivo on drug delivery to the lung of hydrofluoroalkane (HFA) salbutamol spray was studied in children. METHODS: Five children, aged 7-12 years, were included in a 3-way crossover randomised single-blind trial. Salbutamol HFA spray...... delivered a significantly (Pplastic spacers reduces lung dose in children by more than two-fold. This is clinically significant and the use of potentially electrostatically charged...

  8. INFLUENCE OF THE SIZE OF METHYLENE SPACERS ON THE THERMAL BEHAVIOR OF SEVERAL ALIPHATIC-AROMATIC POLYESTERS

    Directory of Open Access Journals (Sweden)

    NATALIA HURDUC

    2014-04-01

    Full Text Available Polyesters have a wide range of technical applications and therefore their processing is of the utmost importance. Since polyesters are usually processed by melting, their thermal stability is an extremely important characteristic for the exact determination of the operational parameters. The thermal analysis was carried out using a MOM-Budapest derivatograph at the 10 C/min heating speed, aluminum oxide the reference material, and the air conditions were static. The study lead to conclusions on the thermal stability and degradation mechanism depending on the number of methylene groups in the spacer. Thermal stability is supported by the increase in the number of methylene groups in the spacer. The degradation mechanism is complex through successive reactions. The spacer size influences the nature of the micromolecules formed by spacer fragmenting and by the number of carbon atoms, respectively.

  9. Review and Comparison of simulation software for additive manufacturing process: the practical case of dipole End-Spacers

    CERN Document Server

    Vevers, Arturs

    2017-01-01

    Project was made to compare and benchmark simulation software for additive manufacturing. Simulations for End-spacers and HOM crab cavity were made to compare simulation results with 3D scanned data for these parts.

  10. Spacer Thickness-Dependent Electron Transport Performance of Titanium Dioxide Thick Film for Dye-Sensitized Solar Cells

    Directory of Open Access Journals (Sweden)

    Reda E. El-Shater

    2015-01-01

    Full Text Available A titanium dioxide (P25 film was deposited by cast coating as conductive photoelectrode and subsequently immersed in dye solution (N719 to fabricate the photoanode of dye-sensitized solar cells (DSSCs. A plastic spacer was used as a separation and sealant layer between the photoanode and the counter electrode. The effect of the thickness of this spacer on the transfer of electrons in the liquid electrolyte of the DSSCs was studied by means of both IV curves and electrochemical impedance. Using a spacer thickness range of 20 μm to 50 μm, efficiency ranges from 3.73% to 7.22%. The highest efficiency of 7.22% was obtained with an optimal spacer thickness of 40 μm.

  11. Low-velocity impact behavior of weft-knitted spacer fabrics reinforced composites based on energy absorption

    Science.gov (United States)

    Hasanalizadeh, F.; Dabiryan, H.; Sadighi, M.

    2017-10-01

    Spacer fabrics are prefered to other types of textile fabrics in energy absorption applications due to existence of pile yarns. The particular geometry of spacer fabrics induce to increase resisting out of plane forces such as impact along their thickness. In order to investigate the low-velocity impact behaviour of composites reinforced with spacer fabric, weft-knitted spacer fabrics with different types of pile orientation and pile length were produced using E-glass yarns. Using produced fabrics and epoxy resin, composites samples were provided by hand lay-up method. Low-velocity impact test was carried out on the prepared samples based on a drop-weight method using spherical steel projectile. The indentation at maximum force was extracted as - comparative criteria used to calculate absorbed energy.The results show that the energy absorption of composites increases by increasing the pile density and pile length.

  12. Review of the correlation developments and a new concept based on mixing mechanism for heat transfer enhancement of spacer grids

    Energy Technology Data Exchange (ETDEWEB)

    Mao, H.; Yang, B.W.; Liu, X. [Xi' an Jiaotong Univ., Shaanxi (China). Science and Technology Center for Advanced Nuclear Fuel Research

    2016-07-15

    Spacer grids could cause heat transfer enhancement both at the spacer grid regions and downstream of the spacer grids as a result of mixing promoted by the spacer grids in the rod bundle. This phenomenon has been demonstrated by many experiments, and several correlations have been developed based on these experimental data. This paper gives a review of the grid-enhanced heat transfer correlation developments in single phase flow. Following the exploration of the correlation development history, a predictive formulation of grid-enhanced heat transfer in single phase flow is established taking into account the effect of both swirl flow and crossflow. With emphasis on modeling of the mixing mechanism associated with the mixing vane grid, the new correlation could better reflect the physical process of the heat transfer augmentation, while a large number of experimental data are needed to determine the coefficients of the new correlation.

  13. Effect of electrostatic charge in plastic spacers on the lung delivery of HFA-salbutamol in children

    DEFF Research Database (Denmark)

    Anhøj, J; Bisgaard, H; Lipworth, B J

    1999-01-01

    AIMS: The effect of the electrostatic charge in plastic spacers in vivo on drug delivery to the lung of hydrofluoroalkane (HFA) salbutamol spray was studied in children. METHODS: Five children, aged 7-12 years, were included in a 3-way crossover randomised single-blind trial. Salbutamol HFA spray...... delivered a significantly (Pcharge in plastic spacers reduces lung dose in children by more than two-fold. This is clinically significant and the use of potentially electrostatically charged...

  14. Distribution of CRISPR spacer matches in viruses and plasmids of crenarchaeal acidothermophiles and implications for their inhibitory mechanism

    DEFF Research Database (Denmark)

    Shah, Shiraz Ali; Hansen, Niels R; Garrett, Roger A

    2009-01-01

    Transcripts from spacer sequences within chromosomal repeat clusters [CRISPRs (clusters of regularly interspaced palindromic repeats)] from archaea have been implicated in inhibiting or regulating the propagation of archaeal viruses and plasmids. For the crenarchaeal thermoacidophiles, the chromo......Transcripts from spacer sequences within chromosomal repeat clusters [CRISPRs (clusters of regularly interspaced palindromic repeats)] from archaea have been implicated in inhibiting or regulating the propagation of archaeal viruses and plasmids. For the crenarchaeal thermoacidophiles...

  15. MO-AB-BRA-02: Modeling Nanoparticle-Eluting Spacer Degradation During Brachytherapy Application with in Situ Dose-Painting

    Energy Technology Data Exchange (ETDEWEB)

    Boateng, F [University of Massachusetts Lowell, Lowell, Massachusetts (United States); Ngwa, W [University of Massachusetts Lowell, Lowell, Massachusetts (United States); Harvard Medical School, Boston, MA (United States)

    2016-06-15

    Purpose: Brachytherapy application with in situ dose-painting using gold nanoparticles (GNP) released from GNP-loaded brachytherapy spacers has been proposed as an innovative approach to increase therapeutic efficacy during brachytherapy. This work investigates the dosimetric impact of slow versus burst release of GNP from next generation biodegradable spacers. Methods: Mathematical models were developed based on experimental data to study the release of GNP from a spacer designed with FDA approved poly(lactic-co-glycolic acid) (PLGA) polymer. The diffusion controlled released process and PLGA polymer degradation kinetics was incorporated in the calculations for the first time. An in vivo determined diffusion coefficient was used for determining the concentration profiles and corresponding dose enhancement based on initial GNP-loading concentrations of 7 mg/g. Results: The results showed that there is significant delay before the concentration profile of GNP diffusion in the tumor is similar to that when burst release is assumed as in previous studies. For example, in the case of burst release after spacer administration, it took up to 25 days for all the GNP to be released from the spacer using diffusion controlled release process only. However, it took up to 45 days when a combined model for both diffusion and polymer degradation processes was used. Based on the tumor concentration profiles, a significant dose enhancement factor (DEF >20%), could be attained at a tumor distances of 5 mm from a spacer loaded with 10 nm GNP sizes. Conclusion: The results highlight the need to take the slow release of GNP from spacers and factors such as biodegradation of polymers into account in research development of GNP-eluting spacers for brachytherapy applications with in-situ dose-painting using gold nanoparticles. The findings suggest that I-125 may be the more appropriate for such applications given the relatively longer half-live compared to other radioisotopes like Pd-103

  16. Dansyl-naphthalimide dyads as molecular probes: effect of spacer group on metal ion binding properties.

    Science.gov (United States)

    Shankar, Balaraman H; Ramaiah, Danaboyina

    2011-11-17

    Interaction of a few dansyl-naphthalimide conjugates 1a-e linked through polymethylene spacer groups with various metal ions was investigated through absorption, fluorescence, NMR, isothermal calorimetric (ITC), and laser flash photolysis techniques. The characteristic feature of these dyads is that they exhibit competing singlet-singlet energy transfer (SSET) and photoinduced electron transfer (PET) processes, both of which decrease with the increase in spacer length. Depending on the spacer group, these dyads interact selectively with divalent Cu(2+) and Zn(2+) ions, as compared to other mono- and divalent metal ions. Jobs plot analysis showed that these dyads form 2:3 complexes with Cu(2+) ions, while 1:1 complexes were observed with Zn(2+) ions. The association constants for the Zn(2+) and Cu(2+) complexes were determined and are found to be in the order 10(3)-10(5) M(-1). Irrespective of the length of the spacer group, these dyads interestingly act as fluorescence ratiometric molecular probes for Cu(2+) ions by altering the emission intensity of both dansyl and naphthalimide chromophores. In contrast, only the fluorescence intensity of the naphthalimide chromophore of the lower homologues (n = 1-3) was altered by Zn(2+) ions. (1)H NMR and ITC measurements confirmed the involvement of both sulfonamide and dimethylamine groups in the complexation with Cu(2+) ions, while only the latter group was involved with Zn(2+) ions. Laser excitation of the dyads 1a-e showed formation of a transient absorption which can be attributed to the radical cation of the naphthalimide chromophore, whereas only the triplet excited state of the dyads 1a-e was observed in the presence of Cu(2+) ions. Uniquely, the complexation of 1a-e with Cu(2+) ions affects both PET and SSET processes, while only the PET process was partially inhibited by Zn(2+) ions in the lower homologues (n = 1-3) and the higher homologues exhibited negligible changes in their emission properties. Our results

  17. A Comparison of Flow Field Characteristics from PIV Experiment Measurement to Numerical Simulation behind a Spacer in a Vertical Pipe

    Directory of Open Access Journals (Sweden)

    Lávička D.

    2010-07-01

    Full Text Available This paper describes the topic of measurement using a modern laser method (PIV in an annular channel of very small dimensions. The annular channel simulates the flow area around a model of a fuel rod in the VVER nuclear reactor. The annular channel holds spacers which create obstacles to fluid flow. The spacers serve a number of important purposes. In the real nuclear reactor, the spacer holds a fuel rod in the fuel rod bundle. Another important function of the spacer is to influence the flow field characteristics, especially turbulence size, by the shape of the spacer. The value of the turbulence regulates the intensity of heat transfer between the fuel rod and the fluid. Therefore, it is very important to provide a correct description and analysis of the flow field behind the obstacle the spacer generates. The paper further looks into the solution of the same task using numerical simulation. The solution of this task consisted of setting the suitable boundary conditions and of setting the turbulence model for the numerical simulation. The result is a comparison of the flow field characteristics from the experimental measurement and the findings of the numerical simulation. The numerical simulation was carried out using commercial CFD software package, FLUENT.

  18. A Rationale for Going Back to the Future: Use of Disposable Spacers for Pressurised Metered Dose Inhalers

    Directory of Open Access Journals (Sweden)

    Mark Sanders

    2015-01-01

    Full Text Available The introduction of pressurised metered dose inhalers (MDIs in the mid-1950s completely transformed respiratory treatment. Despite decades of availability and healthcare support and development of teaching aids and devices to promote better use, poor pMDI user technique remains a persistent issue. The main pMDI user aid is the spacer/valved holding chamber (VHC device. Spacer/chamber features (size, shape, configuration, construction material, and hygiene considerations can vie with clinical effectiveness (to deliver the same dose as a correctly used pMDI, user convenience, cost, and accessibility. Unsurprisingly, improvised, low-cost alternatives (plastic drink bottles, paper cups, and paper towel rolls have been pressed into seemingly effective service. A UK law change permitting schools to hold emergency inhalers and spacers has prompted a development project to design a low-cost, user-friendly, disposable, and recyclable spacer. This paper spacer requires neither preuse priming nor washing, and has demonstrated reproducible lung delivery of salbutamol sulphate pMDI, comparable to an industry-standard VHC, an alternative paperboard VHC, and pMDI alone. This new device appears to perform better than these other VHC devices at the low flow rates thought achievable by paediatric patients. The data suggest that this disposable spacer may have a place in the single-use emergency setting.

  19. Identification of transcribed sequences in the human genome. Final report, September 15, 1991--September 14, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Gardiner, K.

    1992-12-01

    The workshop was held at the National Institutes of Mental Health, Bethesda, Maryland, on October 4 and 5, 1991. Twenty-four investigators attended from England, Germany and the United States. The topics discussed included: Genome sequence analysis using computer assisted detection of open reading frames, splice sites and hexamer patterns, direct exon identification using trapping of internal and 3` exons, and a recombination based system, cDNA library construction and screening, including the use of normalization and subtraction procedures, Alu and splice donor site PCR from hybrid cell lines, and microdissection clones as probes, use of labeled CDNAS as probes to screen lambda and cosmid libraries, and sequencing of random cDNAs.

  20. Japanese external quality assessment program to standardize HIV-1 drug-resistance testing (JEQS2010 program) using in vitro transcribed RNA as reference material.

    Science.gov (United States)

    Yoshida, Shigeru; Hattori, Junko; Matsuda, Masakazu; Okada, Kiyomi; Kazuyama, Yukumasa; Hashimoto, Osamu; Ibe, Shiro; Fujisawa, Shin-ichi; Chiba, Hitoshi; Tatsumi, Masashi; Kato, Shingo; Sugiura, Wataru

    2015-03-01

    To design appropriate antiretroviral therapy regimens and avoid the emergence of human immunodeficiency virus (HIV)-1 variants with reduced susceptibility to antiretroviral drugs, genotypic drug-resistance testing (HIV genotyping) is strongly recommended. To monitor the quality of HIV genotyping in Japan, we performed an external quality assessment (EQA), named the Japanese external quality assessment program, to standardize HIV genotyping (JEQS). To accurately evaluate the quality of HIV genotyping, we employed as reference material (RM) a well-characterized sample, in vitro transcribed RNA (trRNA) that includes the HIV gag-pol sequence, and created a JEQS2010 panel consisting of three single variant and three mixed trRNA samples. All 11 participating laboratories showed high concordance rates (>96%) for the single variant samples. Eight laboratories also showed good rates of detecting minor variants, but three laboratories failed to detect the variants comprising one-half of the sample. These three laboratories used a common primer that had four internal mismatches to the minor trRNA clone. This program showed the usefulness of trRNA as RM, the high quality of HIV genotyping, and extensive interlaboratory variation in the ability to detect minor variants. These results suggest that improving the quality of HIV genotyping in Japan requires regularly implementing the EQA program and improving the HIV genotyping protocol in each laboratory.

  1. In vitro transcribed RNA molecules for the diagnosis of pandemic 2009 influenza A(H1N1) virus by real-time RT-PCR.

    Science.gov (United States)

    Bermúdez de León, Mario; Peñuelas-Urquides, Katia; Aguado-Barrera, Miguel E; Currás-Tuala, María José; Escobedo-Guajardo, Brenda L; González-Ríos, Rosa Nelly; Mata-Tijerina, Viviana L; Vázquez-Monsiváis, Ofelia E

    2013-11-01

    The 2009 influenza A(H1N1) outbreak allowed the implementation of new epidemiologic surveillance tools in several countries around the world. A new molecular protocol with appropriate sensitivity and specificity using real-time RT-PCR was developed by the Centers for Disease Control and Prevention (CDC) to identify the pandemic 2009 influenza A (H1N1) virus in human specimens. In the CDC protocol, positive controls are available only upon request and they are taken from cell cultures infected with 2009 influenza A(H1N1) virus, representing a handling risk for laboratory technicians. The poor availability of positive control materials in diagnostic laboratories may limit the public health response. The aim of the work presented in this paper was to develop positive controls for the diagnostic testing of influenza A(H1N1) virus that could be used in the CDC real-time RT-PCR protocol. A series of plasmid constructs bearing partial sequences of the viral genes were created and each construct was used as a template for in vitro transcription. RNA molecules were obtained successfully at high yield, i.e., 2×10(7) assays per microliter. Thus, the inclusion of these molecules in the influenza panel as positive controls is proposed. The in vitro transcribed RNA could also be used as quality standards in the design of international proficiency studies. Copyright © 2013 Elsevier B.V. All rights reserved.

  2. Tree diversity and species identity effects on soil fungi, protists and animals are context dependent

    Czech Academy of Sciences Publication Activity Database

    Tedersoo, L.; Bahram, M.; Cajthaml, Tomáš; Polme, S.; Hiiesalu, I.; Anslan, S.; Harend, H.; Buegger, F.; Pritsch, K.; Koricheva, J.; Abarenkov, K.

    2016-01-01

    Roč. 10, č. 2 (2016), s. 346-362 ISSN 1751-7362 Institutional support: RVO:61388971 Keywords : INTERNAL TRANSCRIBED SPACER * ECTOMYCORRHIZAL FUNGI * COMMUNITY STRUCTURE Subject RIV: EE - Microbiology, Virology Impact factor: 9.664, year: 2016

  3. Rigidoporus pouzarii, a new polypore species related to Rigidoporus crocatus

    Czech Academy of Sciences Publication Activity Database

    Vampola, P.; Vlasák, Josef

    2012-01-01

    Roč. 64, č. 1 (2012), s. 3-11 ISSN 1211-0981 Institutional research plan: CEZ:AV0Z50510513 Institutional support: RVO:60077344 Keywords : Rigidoporus * internal transcribed spacer * alluvial forest fungi Subject RIV: EF - Botanics

  4. The identity of Postia lowei (Basidiomycota, Polyporales) and notes on related or similar species

    Czech Academy of Sciences Publication Activity Database

    Vampola, P.; Ordynets, A.; Vlasák, Josef

    2014-01-01

    Roč. 66, č. 1 (2014), s. 39-52 ISSN 1211-0981 Institutional support: RVO:60077344 Keywords : Postia * polypores * internal transcribed spacer * taxonomy Subject RIV: EB - Genetics ; Molecular Biology

  5. Taxonomy and phylogeny of Phellinidium (Hymenochaetales, Basidiomycota): A redefinition and the segregation of Coniferiporia gen. nov for forest pathogens

    Czech Academy of Sciences Publication Activity Database

    Zhou, L.-W.; Vlasák, Josef; Dai, Y.C.

    2016-01-01

    Roč. 120, č. 8 (2016), s. 988-1001 ISSN 1878-6146 Institutional support: RVO:60077344 Keywords : Forest pathogen * Hymenochaetaceae * Internal transcribed spacer Subject RIV: EF - Botanics Impact factor: 2.184, year: 2016

  6. Cladistic relationships within the genus Cinnamomum (Lauraceae ...

    African Journals Online (AJOL)

    Cladistic relationships within the genus Cinnamomum (Lauraceae) in Taiwan based on analysis of leaf morphology and inter-simple sequence repeat (ISSR) and internal transcribed spacer (ITS) molecular markers.

  7. Genetic and phylogenetic analysis of ten Gobiidae species in China ...

    African Journals Online (AJOL)

    Administrator

    2011-09-07

    In Chinese). Xu F, Sun M (2001). Comparative analysis of phylogenetic relationships of grain amaranths and their wild relatives (Amaranthus;. Amaranthaceae) using internal transcribed spacer, amplified fragment length ...

  8. Evolution and host specificity in the ectomycorrhizal genus Leccinum

    NARCIS (Netherlands)

    Bakker, den H.C.; Zuccarello, G.C.; Kuyper, T.W.; Noordeloos, M.E.

    2004-01-01

    Species of the ectomycorrhizal genus Leccinum are generally considered to be host specialists. We determined the phylogenetic relationships between species of Leccinum from Europe and North America based on second internal transcribed spacer (ITS2) and glyceraldehyde 3-phosphate dehydrogenase

  9. Finding needles in haystacks: linking scientific names, reference specimens and molecular data for Fungi

    Czech Academy of Sciences Publication Activity Database

    Schoch, C.L.; Robbertse, B.; Robert, V.; Vu, D.; Cardinali, G.; Irinyi, L.; Meyer, W.; Nilsson, R.H.; Hughes, K.; Miller, A.N.; Kirk, P.M.; Abarenkov, K.; Aime, M.C.; Ariyawansa, H. A.; Bidartondo, M.; Boekhout, T.; Buyck, B.; Cai, Q.; Chen, J.; Crespo, A.; Crous, P. W.; Damm, U.; de Beer, Z.W.; Dentinger, B. T. M.; Divakar, P.K.; Duenas, M.; Feau, N.; Fliegerová, Kateřina; Garcia, M. A.; Ge, Z. W.; Griffith, G.W.; Groenewald, J.Z.; Groenewald, M.; Grube, M.; Gryzenhout, M.; Gueidan, C.; Guo, L.; Hambleton, S.; Hamelin, R.C.; Hansen, K.; Hofstetter, V.; Hong, S.B.; Houbraken, J.; Hyde, K.D.; Inderbitzin, P.; Johnston, P.R.; Karunarathna, S. C.; Koljalg, U.; Kovacs, G.M.; Kraichak, E.; Krizsan, K.; Kurtzman, C.P.; Larsson, K. H.; Leavitt, S.; Letcher, P. M.; Liimatainen, K.; Liu, J. K.; Lodge, D. J.; Luangsa-Ard, J.J.; Lumbsch, H. T.; Maharachchikumbura, S.S.; Manamgoda, D.; Martin, M.P.; Minnis, A.M.; Moncalvo, J.M.; Mule, G.; Nakasone, K. K.; Niskanen, T.; Olariaga, I.; Papp, T.; Petkovits, T.; Pino-Bodas, R.; Powell, M. J.; Raja, H.A.; Redecker, D.; Sarmiento-Ramirez, J.M.; Seifert, K. A.; Shrestha, B.; Stenroos, S.; Stielow, B.; Suh, S.O.; Tanaka, K.; Tedersoo, L.; Telleria, M. T.; Udayanga, D.; Untereiner, W. A.; Uribeondo, J. D.; Subbarao, K. V.; Vágvölgyi, C.; Visagie, C.; Voigt, K.; Walker, D. M.; Weir, B.S.; Weiss, M.; Wijayawardene, N. N.; Wingfield, M. J.; Xu, J. P.; Yang, Z. L.; Zhang, N.; Zhuang, W.Y.; Federhen, S.

    -, bau061 (2014) E-ISSN 1758-0463 Institutional support: RVO:67985904 Keywords : Internal transcribed spacer * Ribosomal DNA * Interspecific hybridization Subject RIV: EE - Microbiology, Virology Impact factor: 3.372, year: 2014

  10. Prohibitin is overexpressed in Huh-7-HCV and Huh-7.5-HCV cells harboring in vitro transcribed full-length hepatitis C virus RNA

    Directory of Open Access Journals (Sweden)

    Wang Wen-Jun

    2011-09-01

    Full Text Available Abstract Background Currently, up-regulated proteins and apoptosis in hepatitis C is a hot topic in exploring the pathogenic mechanism of Heptitis C Virus(HCV. Some recent studies shows that prohibitin is overexpressed in cells expressing HCV core proteins, and up-regulated prohibitin is also found in human hepatoma cell line HCC-M, lung cancer, prostate cancer, and other cancers. Prohibitin is an important member of the membrane protein superfamily, and it plays a role of molecular chaperones in mitochondrial protein stability. Meanwhile, it has a permissive action on tumor growth or acts as an oncosuppressor. Based on our previously established the in vitro HCV cell-culture system (HCVcc, here we aimed to investigate the different expression profiles of prohibitin in Huh-7-HCV and Huh-7.5-HCV cells Methods The total cellular RNA of Huh-7, Huh-7.5, Huh-7-HCV and Huh-7.5-HCV cells were extracted, and then the first-strand cDNA was reversely transcribed. The expression of prohibitin at the mRNA level was assessed by real-time PCR with GAPDH as the control. Furthermore, the expression of prohibitin at the protein level was evaluated by western blot with GAPDH as an internal control. Results Our results of real-time PCR showed that the mRNA expression level of prohibitin in Huh-7-HCV cells was 2.09 times higher than that in Huh-7 cells, while, the mRNA level of prohibitin in Huh-7.5-HCV cells was 2.25 times higher than that in Huh-7.5 cells. The results of western blot showed that the protein expression level of prohibitin in Huh-7-HCV cells was 2.38 times higher than that in Huh-7 cells, while the protein expression of prohibitin in Huh-7.5-HCV cells was 2.29 times higher than that in Huh-7.5 cells. Conclusions The expression of prohibitin was relatively high in Huh-7-HCV and Huh-7.5-HCV cells harboring in vitro transcribed full-length HCV RNA.

  11. Targeted detection of in vivo endogenous DNA base damage reveals preferential base excision repair in the transcribed strand.

    Science.gov (United States)

    Reis, António M C; Mills, Wilbur K; Ramachandran, Ilangovan; Friedberg, Errol C; Thompson, David; Queimado, Lurdes

    2012-01-01

    Endogenous DNA damage is removed mainly via base excision repair (BER), however, whether there is preferential strand repair of endogenous DNA damage is still under intense debate. We developed a highly sensitive primer-anchored DNA damage detection assay (PADDA) to map and quantify in vivo endogenous DNA damage. Using PADDA, we documented significantly higher levels of endogenous damage in Saccharomyces cerevisiae cells in stationary phase than in exponential phase. We also documented that yeast BER-defective cells have significantly higher levels of endogenous DNA damage than isogenic wild-type cells at any phase of growth. PADDA provided detailed fingerprint analysis at the single-nucleotide level, documenting for the first time that persistent endogenous nucleotide damage in CAN1 co-localizes with previously reported spontaneous CAN1 mutations. To quickly and reliably quantify endogenous strand-specific DNA damage in the constitutively expressed CAN1 gene, we used PADDA on a real-time PCR setting. We demonstrate that wild-type cells repair endogenous damage preferentially on the CAN1 transcribed strand. In contrast, yeast BER-defective cells accumulate endogenous damage preferentially on the CAN1 transcribed strand. These data provide the first direct evidence for preferential strand repair of endogenous DNA damage and documents the major role of BER in this process.

  12. Xeroderma pigmentosum complementation group C cells remove pyrimidine dimers selectively from the transcribed strand of active genes

    International Nuclear Information System (INIS)

    Venema, J.; van Hoffen, A.; Karcagi, V.; Natarajan, A.T.; van Zeeland, A.A.; Mullenders, L.H.

    1991-01-01

    The authors have measured the removal of UV-induced pyrimidine dimers from DNA fragments of the adenosine deaminase (ADA) and dihydrofolate reductase (DHFR) genes in primary normal human and xeroderma pigmentosum complementation group C (XP-C) cells. Using strand-specific probes, we show that in normal cells, preferential repair of the 5' part of the ADA gene is due to the rapid and efficient repair of the transcribed strand. Within 8 h after irradiation with UV at 10 J m-2, 70% of the pyrimidine dimers in this strand are removed. The nontranscribed strand is repaired at a much slower rate, with 30% dimers removed after 8 h. Repair of the transcribed strand in XP-C cells occurs at a rate indistinguishable from that in normal cells, but the nontranscribed strand is not repaired significantly in these cells. Similar results were obtained for the DHFR gene. In the 3' part of the ADA gene, however, both normal and XP-C cells perform fast and efficient repair of either strand, which is likely to be caused by the presence of transcription units on both strands. The factor defective in XP-C cells is apparently involved in the processing of DNA damage in inactive parts of the genome, including nontranscribed strands of active genes. These findings have important implications for the understanding of the mechanism of UV-induced excision repair and mutagenesis in mammalian cells

  13. FACT prevents the accumulation of free histones evicted from transcribed chromatin and a subsequent cell cycle delay in G1.

    Directory of Open Access Journals (Sweden)

    Macarena Morillo-Huesca

    2010-05-01

    Full Text Available The FACT complex participates in chromatin assembly and disassembly during transcription elongation. The yeast mutants affected in the SPT16 gene, which encodes one of the FACT subunits, alter the expression of G1 cyclins and exhibit defects in the G1/S transition. Here we show that the dysfunction of chromatin reassembly factors, like FACT or Spt6, down-regulates the expression of the gene encoding the cyclin that modulates the G1 length (CLN3 in START by specifically triggering the repression of its promoter. The G1 delay undergone by spt16 mutants is not mediated by the DNA-damage checkpoint, although the mutation of RAD53, which is otherwise involved in histone degradation, enhances the cell-cycle defects of spt16-197. We reveal how FACT dysfunction triggers an accumulation of free histones evicted from transcribed chromatin. This accumulation is enhanced in a rad53 background and leads to a delay in G1. Consistently, we show that the overexpression of histones in wild-type cells down-regulates CLN3 in START and causes a delay in G1. Our work shows that chromatin reassembly factors are essential players in controlling the free histones potentially released from transcribed chromatin and describes a new cell cycle phenomenon that allows cells to respond to excess histones before starting DNA replication.

  14. MCM3AP is transcribed from a promoter within an intron of the overlapping gene for GANP.

    Science.gov (United States)

    Wickramasinghe, Vihandha O; McMurtrie, Paul I A; Marr, Jackie; Amagase, Yoko; Main, Sarah; Mills, Anthony D; Laskey, Ronald A; Takei, Yoshinori

    2011-02-25

    MCM3 acetylase (MCM3AP) and germinal-centre associated nuclear protein (GANP) are transcribed from the same locus and are therefore confused in databases because the MCM3 acetylase DNA sequence is contained entirely within the much larger GANP sequence and the entire MCM3AP sequence is identical to the carboxy terminus of GANP. Thus, the MCM3AP and GANP genes are read in the same reading frame and MCM3AP is an N-terminally truncated region of GANP. However, we show here that MCM3AP and GANP are different proteins, occupying different locations in the cell and transcribed from different promoters. Intriguingly, a promoter for MCM3AP lies within an intron of GANP. This report is an interesting example in nature of two separate gene products from the same locus that perform two entirely different functions in the cell. Therefore, to avoid further confusion, they should now be referred to as separate but overlapping genes. Copyright © 2011 Elsevier Ltd. All rights reserved.

  15. The CRISPRdb database and tools to display CRISPRs and to generate dictionaries of spacers and repeats

    Directory of Open Access Journals (Sweden)

    Vergnaud Gilles

    2007-05-01

    Full Text Available Abstract Background In Archeae and Bacteria, the repeated elements called CRISPRs for "clustered regularly interspaced short palindromic repeats" are believed to participate in the defence against viruses. Short sequences called spacers are stored in-between repeated elements. In the current model, motifs comprising spacers and repeats may target an invading DNA and lead to its degradation through a proposed mechanism similar to RNA interference. Analysis of intra-species polymorphism shows that new motifs (one spacer and one repeated element are added in a polarised fashion. Although their principal characteristics have been described, a lot remains to be discovered on the way CRISPRs are created and evolve. As new genome sequences become available it appears necessary to develop automated scanning tools to make available CRISPRs related information and to facilitate additional investigations. Description We have produced a program, CRISPRFinder, which identifies CRISPRs and extracts the repeated and unique sequences. Using this software, a database is constructed which is automatically updated monthly from newly released genome sequences. Additional tools were created to allow the alignment of flanking sequences in search for similarities between different loci and to build dictionaries of unique sequences. To date, almost six hundred CRISPRs have been identified in 475 published genomes. Two Archeae out of thirty-seven and about half of Bacteria do not possess a CRISPR. Fine analysis of repeated sequences strongly supports the current view that new motifs are added at one end of the CRISPR adjacent to the putative promoter. Conclusion It is hoped that availability of a public database, regularly updated and which can be queried on the web will help in further dissecting and understanding CRISPR structure and flanking sequences evolution. Subsequent analyses of the intra-species CRISPR polymorphism will be facilitated by CRISPRFinder and the

  16. PairWise Neighbours database: overlaps and spacers among prokaryote genomes

    Directory of Open Access Journals (Sweden)

    Garcia-Vallvé Santiago

    2009-06-01

    Full Text Available Abstract Background Although prokaryotes live in a variety of habitats and possess different metabolic and genomic complexity, they have several genomic architectural features in common. The overlapping genes are a common feature of the prokaryote genomes. The overlapping lengths tend to be short because as the overlaps become longer they have more risk of deleterious mutations. The spacers between genes tend to be short too because of the tendency to reduce the non coding DNA among prokaryotes. However they must be long enough to maintain essential regulatory signals such as the Shine-Dalgarno (SD sequence, which is responsible of an efficient translation. Description PairWise Neighbours is an interactive and intuitive database used for retrieving information about the spacers and overlapping genes among bacterial and archaeal genomes. It contains 1,956,294 gene pairs from 678 fully sequenced prokaryote genomes and is freely available at the URL http://genomes.urv.cat/pwneigh. This database provides information about the overlaps and their conservation across species. Furthermore, it allows the wide analysis of the intergenic regions providing useful information such as the location and strength of the SD sequence. Conclusion There are experiments and bioinformatic analysis that rely on correct annotations of the initiation site. Therefore, a database that studies the overlaps and spacers among prokaryotes appears to be desirable. PairWise Neighbours database permits the reliability analysis of the overlapping structures and the study of the SD presence and location among the adjacent genes, which may help to check the annotation of the initiation sites.

  17. Optimization of an organic photovoltaic device via modulation of thickness of photoactive and optical spacer layers.

    Science.gov (United States)

    Li, Qi; Yoon, Won Jung; Ju, Heongkyu

    2014-01-01

    We examine the modulation effects of thicknesses of both a photoactive layer (a bulk-heterojunction (BHJ) of poly(3-hexylthiophene) and [6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PCBM)) and an optical spacer of a transparent metal oxide, for power conversion efficiency optimization of organic photovoltaic devices. The redistribution of the optical intensity at the photoactive layer via the thickness modulation of both layers is taken into account, to produce three-dimensional (3D) plots as a function of both layer thicknesses of 0 to 400 nm range (5 nm step), for the device efficiency optimization. The modulation pattern of absorption is produced in the 3D plot as scanning the thicknesses of both layers as a result of modulation of interference between incoming and reflected light, which can be secured by changing the effective optical path length between two electrodes of a photovoltaic device. It is also seen that the case of inserting the spacer of the higher refractive index demands finer adjustment of the spacer layer thickness to achieve the optimum device efficiency. In addition, the series resistance of the photoactive layer of the thickness range of 0 to 70 nm is taken into account to provide the 3D plots as a function of the scanned thicknesses of both layers. Inclusion of the series resistance of the photoactive layer, which is also the function of its thickness, in the simulation, indicates that the series resistance can influence qualitatively the dependence of power conversion efficiency (PCE) on the thicknesses of both layers. We also find that minimization of series resistance, e.g., by device annealing, allows not only the relevant voltage to increase but also the optimum thickness of the photoactive layer to increase, leading to more absorption of light.

  18. Diversity in a Polymicrobial Community Revealed by Analysis of Viromes, Endolysins and CRISPR Spacers.

    Directory of Open Access Journals (Sweden)

    Michelle Davison

    Full Text Available The polymicrobial biofilm communities in Mushroom and Octopus Spring in Yellowstone National Park (YNP are well characterized, yet little is known about the phage populations. Dominant species, Synechococcus sp. JA-2-3B'a(2-13, Synechococcus sp. JA-3-3Ab, Chloroflexus sp. Y-400-fl, and Roseiflexus sp. RS-1, contain multiple CRISPR-Cas arrays, suggesting complex interactions with phage predators. To analyze phage populations from Octopus Spring biofilms, we sequenced a viral enriched fraction. To assemble and analyze phage metagenomic data, we developed a custom module, VIRITAS, implemented within the MetAMOS framework. This module bins contigs into groups based on tetranucleotide frequencies and CRISPR spacer-protospacer matching and ORF calling. Using this pipeline we were able to assemble phage sequences into contigs and bin them into three clusters that corroborated with their potential host range. The virome contained 52,348 predicted ORFs; some were clearly phage-like; 9319 ORFs had a recognizable Pfam domain while the rest were hypothetical. Of the recognized domains with CRISPR spacer matches, was the phage endolysin used by lytic phage to disrupt cells. Analysis of the endolysins present in the thermophilic cyanophage contigs revealed a subset of characterized endolysins as well as a Glyco_hydro_108 (PF05838 domain not previously associated with sequenced cyanophages. A search for CRISPR spacer matches to all identified phage endolysins demonstrated that a majority of endolysin domains were targets. This strategy provides a general way to link host and phage as endolysins are known to be widely distributed in bacteriophage. Endolysins can also provide information about host cell wall composition and have the additional potential to be used as targets for novel therapeutics.

  19. Modal properties of the flexural vibrating package of rods linked by spacer grids

    Directory of Open Access Journals (Sweden)

    Zeman V.

    2011-06-01

    Full Text Available The paper deals with the modelling and modal analysis of the large package of identical parallel rods linked by transverse springs (spacer grids placed on several level spacings. The rod discretization by finite element method is based on Rayleigh beam theory. For the cyclic and central symmetric package of rods (such as fuel rods in nuclear fuel assembly the system decomposition on the identical revolved rod segments was applied. A modal synthesis method with condensation is used for modelling of the whole system. The presented method is the first step for modelling the nuclear fuel assembly vibration caused by excitation determined by the support plate motion of the reactor core.

  20. Development of a manufacturing process for Zr-based spacer grid materials

    International Nuclear Information System (INIS)

    Jung, Yang-Il; Lee, Myung-Ho; Choi, Byoung-Kwon; Park, Jeong-Yong; Jeong, Yong-Hwan

    2009-01-01

    A novel manufacturing process for zirconium-based alloy strips has been developed. This process consists of a prior heat-treatment under a monotectoid temperature before subsequent deformation processes. During the prior heat-treatment process at 580 deg. C for 10 h, β-Nb phase particles were precipitated. The second phase particles stabilized the alloy from corrosion even the subsequent annealings at high temperatures. This result enhances the manufacturability of zirconium-based alloys, especially for high strength alloys with high Nb contents. The process developed can also be applied to commercial zirconium-based spacer grid materials, which would give rise to a higher producibility of such materials.

  1. Influence of the boundary conditions on heat and mass transfer in spacer-filled channels

    Science.gov (United States)

    Ciofalo, M.; La Cerva, M. F.; Di Liberto, M.; Tamburini, A.

    2017-11-01

    The purpose of this study is to discuss some problems which arise in heat or mass transfer in complex channels, with special reference to the spacer-filled channels adopted in membrane processes. Among the issues addressed are the consistent definition of local and mean heat or mass transfer coefficients; the influence of the wall boundary conditions; the influence of one-side versus two-side heat/mass transfer. Most of the results discussed were obtained by finite volume CFD simulations concerning heat transfer in Membrane Distillation or mass transfer in Electrodialysis and Reverse Electrodialysis, but many of the conclusions apply also to different processes involving geometrically complex channels

  2. Comparative study of the contribution of various PWR spacer grid components to hydrodynamic and wall pressure characteristics

    International Nuclear Information System (INIS)

    Bhattacharjee, Saptarshi; Ricciardi, Guillaume; Viazzo, Stéphane

    2017-01-01

    Highlights: • Complex geometry inside a PWR fuel assembly is simulated using simplified 3D models. • Structured meshes are generated as far as possible. • Fluctuating hydrodynamic and wall pressure field are analyzed using LES. • Comparative studies between square spacer grid, circular spacer grid and mixing vanes are presented. • Simulations are compared with experimental data. - Abstract: Flow-induced vibrations in a pressurized water reactor (PWR) core can cause fretting wear in fuel rods. These vibrations can compromise safety of a nuclear reactor. So, it is necessary to know the random fluctuating forces acting on the rods which cause these vibrations. In this paper, simplified 3D models like square spacer grid, circular spacer grid and symmetric mixing vanes have been used inside an annular pipe. Hydrodynamic and wall pressure characteristics are evaluated using large eddy simulations (LES). Structured meshes are generated as far as possible. Simulations are compared with an experiment. Results show that the grid and vanes have a combined effect: grid accelerates the flow whereas the vanes contribute to the swirl structures. Spectral analysis of the simulations illustrate vortex shedding phenomenon in the wake of spacer grids. This initial study opens up interesting perspectives towards improving the modeling strategy and understanding the complex phenomenon inside a PWR core.

  3. Comparative study of the contribution of various PWR spacer grid components to hydrodynamic and wall pressure characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Bhattacharjee, Saptarshi, E-mail: saptarshi.bhattacharjee@outlook.com [Alternative Energies and Atomic Energy Commission (CEA) – Cadarache, DEN/DTN/STCP/LHC, 13108 Saint Paul lez Durance Cedex (France); Laboratoire de Mécanique, Modélisation et Procédés Propres (M2P2), UMR7340 CNRS, Aix-Marseille Université, Centrale Marseille, 13451 Marseille Cedex (France); Ricciardi, Guillaume [Alternative Energies and Atomic Energy Commission (CEA) – Cadarache, DEN/DTN/STCP/LHC, 13108 Saint Paul lez Durance Cedex (France); Viazzo, Stéphane [Laboratoire de Mécanique, Modélisation et Procédés Propres (M2P2), UMR7340 CNRS, Aix-Marseille Université, Centrale Marseille, 13451 Marseille Cedex (France)

    2017-06-15

    Highlights: • Complex geometry inside a PWR fuel assembly is simulated using simplified 3D models. • Structured meshes are generated as far as possible. • Fluctuating hydrodynamic and wall pressure field are analyzed using LES. • Comparative studies between square spacer grid, circular spacer grid and mixing vanes are presented. • Simulations are compared with experimental data. - Abstract: Flow-induced vibrations in a pressurized water reactor (PWR) core can cause fretting wear in fuel rods. These vibrations can compromise safety of a nuclear reactor. So, it is necessary to know the random fluctuating forces acting on the rods which cause these vibrations. In this paper, simplified 3D models like square spacer grid, circular spacer grid and symmetric mixing vanes have been used inside an annular pipe. Hydrodynamic and wall pressure characteristics are evaluated using large eddy simulations (LES). Structured meshes are generated as far as possible. Simulations are compared with an experiment. Results show that the grid and vanes have a combined effect: grid accelerates the flow whereas the vanes contribute to the swirl structures. Spectral analysis of the simulations illustrate vortex shedding phenomenon in the wake of spacer grids. This initial study opens up interesting perspectives towards improving the modeling strategy and understanding the complex phenomenon inside a PWR core.

  4. Anti-cas spacers in orphan CRISPR4 arrays prevent uptake of active CRISPR-Cas I-F systems.

    Science.gov (United States)

    Almendros, Cristóbal; Guzmán, Noemí M; García-Martínez, Jesús; Mojica, Francisco J M

    2016-06-06

    Archaea and bacteria harbour clustered regularly interspaced short palindromic repeats (CRISPR) loci. These arrays encode RNA molecules (crRNA), each containing a sequence of a single repeat-intervening spacer. The crRNAs guide CRISPR-associated (Cas) proteins to cleave nucleic acids complementary to the crRNA spacer, thus interfering with targeted foreign elements. Notably, pre-existing spacers may trigger the acquisition of new spacers from the target molecule by means of a primed adaptation mechanism. Here, we show that naturally occurring orphan CRISPR arrays that contain spacers matching sequences of the cognate (absent) cas genes are able to elicit both primed adaptation and direct interference against genetic elements carrying those genes. Our findings show the existence of an anti-cas mechanism that prevents the transfer of a fully equipped CRISPR-Cas system. Hence, they suggest that CRISPR immunity may be undesired by particular prokaryotes, potentially because they could limit possibilities for gaining favourable sequences by lateral transfer.

  5. The Construction of Chimeric T-Cell Receptor with Spacer Base of Modeling Study of VHH and MUC1 Interaction

    Directory of Open Access Journals (Sweden)

    Nazanin Pirooznia

    2011-01-01

    Full Text Available Adaptive cell immunotherapy with the use of chimeric receptors leads to the best and most specific response against tumors. Chimeric receptors consist of a signaling fragment, extracellular spacer, costimulating domain, and an antibody. Antibodies cause immunogenicity; therefore, VHH is a good replacement for ScFv in chimeric receptors. Since peptide sequences have an influence on chimeric receptors, the effect of peptide domains on each other's conformation were investigated. CD3Zeta, CD28, VHH and CD8α, and FcgIIα are used as signaling moieties, costimulating domain, antibody, and spacers, respectively. To investigate the influence of the ligation of spacers on the conformational structure of VHH, models of VHH were constructed. Molecular dynamics simulation was run to study the influence of the presence of spacers on the conformational changes in the binding sites of VHH. Root mean square deviation and root mean square fluctuation of critical segments in the binding site showed no noticeable differences with those in the native VHH. Results from molecular docking revealed that the presence of spacer FcgIIα causes an increasing effect on VHH with MUC1 interaction. Each of the constructs was transformed into the Jurkat E6.1. Expression analysis and evaluation of their functions were examined. The results showed good expression and function.

  6. Cationic gemini surfactants with cleavable spacer: chemical hydrolysis, biodegradation, and toxicity.

    Science.gov (United States)

    Tehrani-Bagha, A R; Holmberg, K; van Ginkel, C G; Kean, M

    2015-07-01

    The paper describes synthesis and characterization of a new type of cationic gemini surfactant, which has dodecyl tails and a spacer that contains an ester bond. The nomenclature used to describe the structure is 12Q2OCO1Q12, with Q being a quaternary ammonium group and the numbers indicating the number of methylene or methyl groups. Due to the close proximity to the two quaternary ammonium groups, the ester bond is very stable on the acid side and very labile already at slightly alkaline conditions. The hydrolysis products are two single chain surfactants (i.e. 12Q2OH and 12Q1COOH) which are less surface active than the intact gemini surfactant. 12Q2OCO1Q12 was found to be readily biodegradable, i.e. it gave more than 60% biodegradation after 28 days. This is interesting because similar gemini surfactants but with ester bonds in the tails instead of the spacer, have previously been found not to be readily biodegradable. The gemini surfactant was found to be toxic to aquatic organisms (ErC50 value of 0.27 mg/l), although less toxic than the two hydrolysis products. Copyright © 2014 Elsevier Inc. All rights reserved.

  7. Role of spacer length in interaction between novel gemini imidazolium surfactants and Rhizopus oryzae lipase.

    Science.gov (United States)

    Adak, Sunita; Datta, Sougata; Bhattacharya, Santanu; Banerjee, Rintu

    2015-11-01

    An insight into the effects of new ionic liquid-type gemini imidazolium cationic surfactants on the structure and function of the lipases is of prime importance for their potential application. Changes in the activity, stability and structure of Rhizopus oryzae lipase in the presence of novel gemini surfactants, [C16-3-C16im]Br2 and [C16-12-C16im]Br2 were probed in the present study. Surfactant with shorter spacer length, [C16-3-C16im]Br2 was found to be better in improving the hydrolytic activity and thermal stability of the lipase. For both the surfactants, activation was concentration dependent. CD spectroscopy results showed a decrease in α-helix and an increase in β-sheet content in the presence of these surfactants. A higher structural change observed in presence of [C16-12-C16im]Br2 correlated with lower enzyme activity. Isothermal titration calorimetric studies showed the binding to be spontaneous in nature based on sequential two site binding model. The forces involved in binding were found to differ for the two surfactants proving that the spacer length is an important factor which governs the interaction. These surfactants could be used as promising components both in enzyme modification and media engineering for attaining the desired goals in biocatalytic reactions. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. INTERSPINOUS SPACER IN PERSISTENT DISCOGENIC PAIN: PERCUTANEOUS APPROACH OR OPEN TECHNIQUE

    Directory of Open Access Journals (Sweden)

    José Antonio Cruz Ricardez

    Full Text Available ABSTRACT Objective: To compare the postoperative clinical course of placement of interspinous spacer with open technique (ISO with percutaneous interspinous spacer (PIS. Methods: Quasi-experimental, longitudinal study of 42 patients with discogenic pain uncontrolled with analgesics, aged 35-55 years old, 21 women, and 21 men. Clinical history, location of pain, VAS scale before and after surgery, Oswestry Disability Index and Macnab modified scale at 6 months were used. Results: When performing quantitative analysis statistical significance (p = 0.0478, 0.0466, 0.0399 was demonstrated with Student's t test between the results according to VAS scale; in the qualitative analysis with the Oswestry index and Macnab modified scale it was demonstrated the hypothesis that the results is dependent of the surgical technique. Conclusions: According to the results, we can conclude that there is a statistically significant difference depending on the surgical technique used with respect to the rate of disability and functionality in daily life as well as in the improvement of pain symptoms.

  9. The intergenic spacer region of the rDNA in Haplopappus gracilis (Nutt.) Gray.

    Science.gov (United States)

    Ruffini Castiglione, M; Gelati, M T; Cremonini, R; Frediani, M

    2013-06-01

    In this paper, we provide further information on the genome organisation of Haplopappus gracilis, one of the six angiosperms showing the lowest chromosome number, i.e. 2n = 4, by determining the nucleotide sequence of the intergenic spacer region of the ribosomal RNA genes and its cytological localization on metaphase chromosomes. DNA sequence analysis reveals the occurring of a product of 4,382 bp in length, characterised by the presence of four blocks of different repeated sequences. Our analysis also evidenced putative promoter regions with three transcription initiation sites for polymerase I, as previously reported in Artemisia absinthium, belonging to the same Asteraceae family. A fluorescent in situ hybridization with the intergenic spacer probe indicates the presence of rDNA genes only in the satellited chromosomes of H. gracilis; besides, differences in the signal intensity between homologous chromosomes were frequently observed, thus suggesting for these chromosome sites the presence of a variable number of rDNA gene copies, even if a divergent chromatin organisation in corresponding regions cannot be ruled out.

  10. Two-stage revision of septic knee prosthesis with articulating knee spacers yields better infection eradication rate than one-stage or two-stage revision with static spacers.

    Science.gov (United States)

    Romanò, C L; Gala, L; Logoluso, N; Romanò, D; Drago, L

    2012-12-01

    The best method for treating chronic periprosthetic knee infection remains controversial. Randomized, comparative studies on treatment modalities are lacking. This systematic review of the literature compares the infection eradication rate after two-stage versus one-stage revision and static versus articulating spacers in two-stage procedures. We reviewed full-text papers and those with an abstract in English published from 1966 through 2011 that reported the success rate of infection eradication after one-stage or two-stage revision with two different types of spacers. In all, 6 original articles reporting the results after one-stage knee exchange arthoplasty (n = 204) and 38 papers reporting on two-stage revision (n = 1,421) were reviewed. The average success rate in the eradication of infection was 89.8% after a two-stage revision and 81.9% after a one-stage procedure at a mean follow-up of 44.7 and 40.7 months, respectively. The average infection eradication rate after a two-stage procedure was slightly, although significantly, higher when an articulating spacer rather than a static spacer was used (91.2 versus 87%). The methodological limitations of this study and the heterogeneous material in the studies reviewed notwithstanding, this systematic review shows that, on average, a two-stage procedure is associated with a higher rate of eradication of infection than one-stage revision for septic knee prosthesis and that articulating spacers are associated with a lower recurrence of infection than static spacers at a comparable mean duration of follow-up. IV.

  11. Flow resistance of orifices and spacers of BWR thermal-hydraulic and neutronic coupling loop

    International Nuclear Information System (INIS)

    Iguchi, Tadashi; Asaka, Hideaki; Nakamura, Hideo

    2002-03-01

    Authors are performing THYNC experiments to study thermal-hydraulic instability under neutronic and thermal-hydraulic coupling. In THYNC experiments, the orifices are installed at the exit of the test section and the spacers are installed in the test section, in order to properly simulate in-core thermal-hydraulics in the reactor core. It is necessary to know the flow resistance of the orifices and spacers for the analysis of THYNC experimental results. Consequently, authors measured the flow resistance of orifice and spacer under single-phase and two-phase flows. Using the experimental results, authors investigated the dependency of the flow resistances on the parameters, such as pressure, mass flux, an geometries. Furthermore, authors investigated the applicability of the basic two-phase flow models, for example the separate flow model, to the two-phase flow multiplier. As the result of the investigation on the single-phase flow experiment, it was found (1) that the effects of pressure and mass flux flow resistance are described by a function of Reynolds number, and (2) that flow resistances of the orifice and the spacer are calculated with the previous prediction methods. However, it was necessary to introduce an empirical coefficient, since it was difficult to predict accurately the flow resistance only with the previous prediction method due to the complicated geometry dependency, for example a flow area blockage ratio. On the other hand, according to the investigation on two-phase flow experiment, the followings were found. (1) Relation between the two-phase flow multiplier and the quality is regarded to be linear under pressure of 2MPa - 7MPa. The relation is dependent on pressure and geometry, and is little dependent on mass flux. (2) Relation between the two-phase flow multiplier and void fraction is little dependent on pressure, mass flux, and geometry under pressure of 0.2MPa - 7MPa and void fraction less than 0.6. The relation is less dependent on

  12. Dataset of the transcribed 45S ribosomal RNA sequence of the tree crop “yerba mate”

    Directory of Open Access Journals (Sweden)

    Patricia M. Aguilera

    2017-06-01

    Full Text Available This contribution contains data related to the research article entitled “The 18S-25S ribosomal RNA unit of yerba mate (Ilex paraguariensis A. St.-Hil.” (Aguilera et al., 2016 [1]. Through a bioinformatic approach involving NGS data, we provide information of the transcribed 45S ribosomal RNA (rRNA sequence of yerba mate, the first reference for the Ilex L. genus. This dataset (Supplementary file 1 comprises information regarding the assembly and annotation of this rRNA unit. The generated data is applicable for comparative analysis and evolutionary studies among Ilex and related taxa. The raw sequencing data used here is available at DDBJ/EMBL/GenBank (NCBI Resource Coordinators, 2016 [2] Sequence Read Archive (SRA under the accession SRP043293 and the consensus 45S ribosomal RNA sequence has been deposited there under the accession GFHV00000000.

  13. Topoisomerase I plays a critical role in suppressing genome instability at a highly transcribed G-quadruplex-forming sequence.

    Directory of Open Access Journals (Sweden)

    Puja Yadav

    2014-12-01

    Full Text Available G-quadruplex or G4 DNA is a non-B secondary DNA structure that comprises a stacked array of guanine-quartets. Cellular processes such as transcription and replication can be hindered by unresolved DNA secondary structures potentially endangering genome maintenance. As G4-forming sequences are highly frequent throughout eukaryotic genomes, it is important to define what factors contribute to a G4 motif becoming a hotspot of genome instability. Using a genetic assay in Saccharomyces cerevisiae, we previously demonstrated that a potential G4-forming sequence derived from a guanine-run containing immunoglobulin switch Mu (Sμ region becomes highly unstable when actively transcribed. Here we describe assays designed to survey spontaneous genome rearrangements initiated at the Sμ sequence in the context of large genomic areas. We demonstrate that, in the absence of Top1, a G4 DNA-forming sequence becomes a strong hotspot of gross chromosomal rearrangements and loss of heterozygosity associated with mitotic recombination within the ∼ 20 kb or ∼ 100 kb regions of yeast chromosome V or III, respectively. Transcription confers a critical strand bias since genome rearrangements at the G4-forming Sμ are elevated only when the guanine-runs are located on the non-transcribed strand. The direction of replication and transcription, when in a head-on orientation, further contribute to the elevated genome instability at a potential G4 DNA-forming sequence. The implications of our identification of Top1 as a critical factor in suppression of instability associated with potential G4 DNA-forming sequences are discussed.

  14. DNA rearrangements from γ-irradiated normal human fibroblasts preferentially occur in transcribed regions of the genome

    International Nuclear Information System (INIS)

    Forrester, H.B.; Radford, I.R.

    2003-01-01

    Full text: DNA rearrangement events leading to chromosomal aberrations are central to ionizing radiation-induced cell death. Although DNA double-strand breaks are probably the lesion that initiates formation of chromosomal aberrations, little is understood about the molecular mechanisms that generate and modulate DNA rearrangement. Examination of the sequences that flank sites of DNA rearrangement may provide information regarding the processes and enzymes involved in rearrangement events. Accordingly, we developed a method using inverse PCR that allows the detection and sequencing of putative radiation-induced DNA rearrangements in defined regions of the human genome. The method can detect single copies of a rearrangement event that has occurred in a particular region of the genome and, therefore, DNA rearrangement detection does not require survival and continued multiplication of the affected cell. Ionizing radiation-induced DNA rearrangements were detected in several different regions of the genome of human fibroblast cells that were exposed to 30 Gy of γ-irradiation and then incubated for 24 hours at 37 deg C. There was a 3- to 5-fold increase in the number of products amplified from irradiated as compared with control cells in the target regions 5' to the C-MYC, CDKN1A, RB1, and FGFR2 genes. Sequences were examined from 121 DNA rearrangements. Approximately half of the PCR products were derived from possible inter-chromosomal rearrangements and the remainder were from intra-chromosomal events. A high proportion of the sequences that rearranged with target regions were located in genes, suggesting that rearrangements may occur preferentially in transcribed regions. Eighty-four percent of the sequences examined by reverse transcriptase PCR were from transcribed sequences in IMR-90 cells. The distribution of DNA rearrangements within the target regions is non-random and homology occurs between the sequences involved in rearrangements in some cases but is not

  15. Vibrational modes and strain in GaN/AlN quantum dot stacks: dependence on spacer thickness

    Energy Technology Data Exchange (ETDEWEB)

    Fresneda, J.; Cros, A.; Llorens, J.M.; Garcia-Cristobal, A.; Cantarero, A. [Institut de Ciencia del Materials, Universitat de Valencia, 46071 Valencia (Spain); Amstatt, B.; Bellet-Amalric, E.; Daudin, B. [CEA-CNRS Group, Nanophysique et Semiconducteurs, DRFMC/SP2M/PSC, CEA-Grenoble, 17 rue des Martyrs, 38054 Grenoble cedex 9 (France)

    2007-06-15

    We have investigated the influence of spacer thickness on the vibrational and strain characteristics of GaN/AlN quantum dot multilayers (QD). The Raman shift corresponding to the E{sub 2h} vibrational mode related to the QDs has been analyzed for AlN thicknesses ranging from 4.4 nm to 13 nm, while the amount of GaN deposited in each layer remained constant from sample to sample. It is shown that there is a rapid blue shift of the GaN vibrational mode with spacer thickness when its value is smaller than 7 nm while it remains almost constant for thicker spacers. A rapid increase of the Raman line-width in the thicker samples is also observed. The experimental behavior is discussed in comparison with the results of a theoretical model for the strain in the QDs. (copyright 2007 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  16. Mutations in Cas9 Enhance the Rate of Acquisition of Viral Spacer Sequences during the CRISPR-Cas Immune Response.

    Science.gov (United States)

    Heler, Robert; Wright, Addison V; Vucelja, Marija; Bikard, David; Doudna, Jennifer A; Marraffini, Luciano A

    2017-01-05

    CRISPR loci and their associated (Cas) proteins encode a prokaryotic immune system that protects against viruses and plasmids. Upon infection, a low fraction of cells acquire short DNA sequences from the invader. These sequences (spacers) are integrated in between the repeats of the CRISPR locus and immunize the host against the matching invader. Spacers specify the targets of the CRISPR immune response through transcription into short RNA guides that direct Cas nucleases to the invading DNA molecules. Here we performed random mutagenesis of the RNA-guided Cas9 nuclease to look for variants that provide enhanced immunity against viral infection. We identified a mutation, I473F, that increases the rate of spacer acquisition by more than two orders of magnitude. Our results highlight the role of Cas9 during CRISPR immunization and provide a useful tool to study this rare process and develop it as a biotechnological application. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. Steady-state, local temperature fields with turbulent liquid sodium flow in nominal and disturbed bundle geometries with spacer grids

    International Nuclear Information System (INIS)

    Moeller, R.; Tschoeke, H.

    1980-01-01

    The operating reliability of nuclear reactors calls for a reliable strength analysis of the highly loaded core elements, one of its prerequisites being the reliable determination of the three-dimensional velocity and temperature fields. To verify thermohydraulics computer programs, extensive local temperature measurements in the rod claddings of the critical bundle zone were performed on a heated 19-rod bundle model with sodium flow and provided with spacer grids (P/D = 1.30; W/D = 1.19). The essential results are: - Outside the spacer grids, the azimuthal temperature variations of the side and corner rods are approximately 10-fold those of rods in the central bundle zone. - The spacer grids investigated give rise to great local temperature peaks and correspondingly great temperature gradients in the axial and azimuthal directions immediately around the support points. - Continuous reduction of a subchannel by rod bowing results in substantial rises of temperature which, however, are limited to adjacent cladding tubes. (orig.)

  18. Invariance of the magnetic behavior and AMI in ferromagnetic biphase films with distinct non-magnetic metallic spacers

    Energy Technology Data Exchange (ETDEWEB)

    Silva, E.F. [Departamento de Física, Universidade Federal do Rio Grande do Norte, 59078-900 Natal, RN (Brazil); Departamento de Física, Universidade Federal de Pernambuco, 50670-901 Recife, PE (Brazil); Gamino, M. [Departamento de Física, Universidade Federal de Pernambuco, 50670-901 Recife, PE (Brazil); Instituto de Física, Universidade Federal do Rio Grande de Sul, 91501-970 Porto Alegre, RS (Brazil); Andrade, A.M.H. de [Instituto de Física, Universidade Federal do Rio Grande de Sul, 91501-970 Porto Alegre, RS (Brazil); Vázquez, M. [Instituto de Ciencia de Materiales de Madrid, CSIC, 28049 Madrid (Spain); Correa, M.A. [Departamento de Física, Universidade Federal do Rio Grande do Norte, 59078-900 Natal, RN (Brazil); Bohn, F., E-mail: felipebohn@fisica.ufrn.br [Departamento de Física, Universidade Federal do Rio Grande do Norte, 59078-900 Natal, RN (Brazil)

    2017-02-01

    We investigate the quasi-static magnetic, magnetotransport, and dynamic magnetic properties in ferromagnetic biphase films with distinct non-magnetic metallic spacer layers. We observe that the nature of the non-magnetic metallic spacer material does not have significant influence on the overall biphase magnetic behavior, and, consequently, on the magnetotransport and dynamic magnetic responses. We focus on the magnetoimpedance effect and verify that the films present asymmetric magnetoimpedance effect. Moreover, we explore the possibility of tuning the linear region of the magnetoimpedance curves around zero magnetic field by varying the probe current frequency in order to achieve higher sensitivity values. The invariance of the magnetic behavior and the asymmetric magnetoimpedance effect in ferromagnetic biphase films with distinct non-magnetic metallic spacers place them as promising candidates for probe element and open possibilities to the development of lower-cost high sensitivity linear magnetic field sensor devices.

  19. The Effect of Subluxation of Articulating Antibiotic Spacers on Bone Defects and Degree of Constraint in Revision Knee Arthroplasty.

    Science.gov (United States)

    Lau, Adrian C K; Howard, James L; Macdonald, Steven J; Teeter, Matthew G; Lanting, Brent A

    2016-01-01

    This study investigated whether subluxation of articulating antibiotic spacers is associated with the bone defects found and constraint required when re-implanting the knee arthroplasty components. Staged revisions for infections of primary total knee arthroplasties between 2004 and 2012 were examined. Radiographic sagittal and coronal subluxations of 72 knees were measured prior to second stage revision. Coronal subluxation was found to be associated with increased requirement for constrained knee systems (P<0.035). Sagittal subluxation was associated with greater tibia bone defects (P<0.037). Careful surgical technique and monitoring of articulating spacers should be done to avoid subluxation after stage 1 revision. If subluxation of the articulating spacer is present, constrained revision knee systems as well as augments should be available at time of re-implantation. Copyright © 2016 Elsevier Inc. All rights reserved.

  20. Parylene C-on-photoresist (POP): a low temperature spacer scheme for polymer/metal nanowire fabrication

    International Nuclear Information System (INIS)

    Li, Yuanhui; Xie, Quan; Wang, Wei; Zhang, Hao; Lei, Yinhua; Zhang, Haixia Alice; Wu, Wengang; Li, Zhihong; Zheng, Mingxin

    2011-01-01

    This work introduced a novel spacer scheme for polymer/metal nanowire preparation by combining Parylene C and photoresist (Parylene C on photoresist, POP, process), both of which possess a low temperature fabrication essence. Adhesion between the Parylene C and the substrate with photoresist onside was improved by introducing a modified silanization pretreatment. Parylene C filled in an undercut generated by regular lithography on a dual-layered photoresist was left as nanometer-sized residues after an isotropic oxygen plasma etching. Parylene C nanowires with the minimal width down to 200 nm were successfully obtained by this POP-based spacer technique, and were then utilized as the etching mask for ion milling of the metal films beneath to realize corresponding chromium/gold nanowires. The present POP scheme will expand the application of the spacer technique in polymer/metal nanowire fabrication for integrated micro/nanoelectromechanical systems. (technical note)

  1. Porosity of spacer-filled channels in spiral-wound membrane systems: Quantification methods and impact on hydraulic characterization.

    Science.gov (United States)

    Siddiqui, A; Lehmann, S; Haaksman, V; Ogier, J; Schellenberg, C; van Loosdrecht, M C M; Kruithof, J C; Vrouwenvelder, J S

    2017-08-01

    The porosity of spacer-filled feed channels influences the hydrodynamics of spiral-wound membrane systems and impacts the overall performance of the system. Therefore, an exact measurement and a detailed understanding of the impact of the feed channel porosity is required to understand and improve the hydrodynamics of spiral-wound membrane systems applied for desalination and wastewater reuse. The objectives of this study were to assess the accuracy of porosity measurement techniques for feed spacers differing in geometry and thickness and the consequences of using an inaccurate method on hydrodynamic predictions, which may affect permeate production. Six techniques were applied to measure the porosity namely, three volumetric techniques based on spacer strand count together with a cuboidal (SC), cylindrical (VCC) and ellipsoidal volume calculation (VCE) and three independent techniques based on volume displacement (VD), weight and density (WD) and computed tomography (CT) scanning. The CT method was introduced as an alternative for the other five already existing and applied methods in practice. Six feed spacers used for the porosity measurement differed in filament thickness, angle between the filaments and mesh-size. The results of the studies showed differences between the porosities, measured by the six methods. The results of the microscopic techniques SC, VCC and VCE deviated significantly from measurements by VD, WD and CT, which showed similar porosity values for all spacer types. Depending on the maximum deviation of the porosity measurement techniques from -6% to +6%, (i) the linear velocity deviations were -5.6% and +6.4% respectively and (ii) the pressure drop deviations were -31% and +43% respectively, illustrating the importance of an accurate porosity measurement. Because of the accuracy and standard deviation, the VD and WD method should be applied for the porosity determination of spacer-filled channels, while the CT method is recommended

  2. Investigation of optical spacer layers from solution based precursors for polymer solar cells using X-ray reflectometry

    DEFF Research Database (Denmark)

    Andersen, Philip Hvidthøft Delff; Skårhøj, Jakob; Andreasen, Jens Wenzel

    2009-01-01

    Optical spacer layers based on titaniumalkoxide precursor solutions were prepared by spin-coating on top of bulk heterojunction layers based on poly-3-hexylthiophene (P3HT) and phenyl-C61-butyric acid methylester (PCBM). Models and experiment have shown that the performance of polymer solar cells...... can improve upon application of an optical spacer by shifting the maximum of the electrical field vector of the incident light into the active layer. This avoids the so called “dead zone” close to the reflective electrode. We demonstrate a simple linear model that can be used to predict the intensity...

  3. Porosity of spacer-filled channels in spiral-wound membrane systems: Quantification methods and impact on hydraulic characterization

    KAUST Repository

    Siddiqui, Amber

    2017-04-13

    The porosity of spacer-filled feed channels influences the hydrodynamics of spiral-wound membrane systems and impacts the overall performance of the system. Therefore, an exact measurement and a detailed understanding of the impact of the feed channel porosity is required to understand and improve the hydrodynamics of spiral-wound membrane systems applied for desalination and wastewater reuse. The objectives of this study were to assess the accuracy of porosity measurement techniques for feed spacers differing in geometry and thickness and the consequences of using an inaccurate method on hydrodynamic predictions, which may affect permeate production. Six techniques were applied to measure the porosity namely, three volumetric calculations based on spacer strand count together with cuboidal (SC), cylindrical (VCC) and ellipsoidal volume calculation (VCE) and three independent techniques based on volume displacement (VD), weight and density (WD) and computed tomography scanning (CT). The CT method was introduced as an alternative for the other five already existing and applied methods in practice.Six feed spacers used for the porosity measurement differed in filament thickness, angle between the filaments and mesh-size. The results of the studies showed differences between the porosities, measured by the six methods. The results of the microscopic techniques SC, VCC and VCE deviated significantly from measurements by VD, WD and CT, which showed similar porosity values for all spacer types.Depending on the maximum deviation of the porosity measurement techniques from –6% to +6%, (i) the linear velocity deviations were −5.6% and +6.4% respectively and (ii) the pressure drop deviations were –31% and +43% respectively, illustrating the importance of an accurate porosity measurement. Because of the accuracy and standard deviation, the VD and WD method should be applied for the porosity determination of spacer-filled channels, while the CT method is recommended for

  4. Minimally invasive treatment of lumbar spinal stenosis with a novel interspinous spacer

    Directory of Open Access Journals (Sweden)

    Shabat S

    2011-09-01

    Full Text Available Shay Shabat1, Larry E Miller2,3, Jon E Block3, Reuven Gepstein11Spinal Care Unit, Sapir Medical Center, Kfar Saba, Israel; 2Miller Scientific Consulting, Inc, Biltmore Lake, NC, USA; 3Jon E Block, PhD, Inc, San Francisco, CA, USAPurpose: To assess the safety and effectiveness of a novel, minimally invasive interspinous spacer in patients with moderate lumbar spinal stenosis (LSS.Methods: A total of 53 patients (mean age, 70 ± 11 years; 45% female with intermittent neurogenic claudication secondary to moderate LSS, confirmed on imaging studies, were treated with the Superion® Interspinous Spacer (VertiFlex, Inc, San Clemente, CA and returned for follow-up visits at 6 weeks, 1 year, and 2 years. Study endpoints included axial and extremity pain severity with an 11-point numeric scale, Zurich Claudication Questionnaire (ZCQ, back function with the Oswestry Disability Index (ODI, health-related quality of life with the Physical Component Summary (PCS and Mental Component Summary (MCS scores from the SF-12, and adverse events.Results: Axial and extremity pain each decreased 54% (both P < 0.001 over the 2-year follow-up period. ZCQ symptom severity scores improved 43% (P < 0.001 and ZCQ physical function improved 44% (P < 0.001 from pre-treatment to 2 years post-treatment. A statistically significant 50% improvement (P < 0.001 also was noted in back function. PCS and MCS each improved 40% (both P < 0.001 from pre-treatment to 2 years. Clinical success rates at 2 years were 83%–89% for ZCQ subscores, 75% for ODI, 78% for PCS, and 80% for MCS. No device infection, implant breakage, migration, or pull-out was observed, although two (3.8% patients underwent explant with subsequent laminectomy.Conclusion: Moderate LSS can be effectively treated with a minimally invasive interspinous spacer. This device is appropriate for select patients who have failed nonoperative treatment measures for LSS and meet strict anatomical criteria.Keywords: Superion, axial

  5. CFD prediction of flow and phase distribution in fuel assemblies with spacers

    Energy Technology Data Exchange (ETDEWEB)

    Anglart, H.; Nylund, O. [ABB Atom AB, Vasteras (Switzerland); Kurul, N. [Rensselaer Polytechnic Institute, Troy, NY (United States)] [and others

    1995-09-01

    This paper is concerned with the modeling and computation of multi-dimensional two-phase flows in BWR fuel assemblies. The modeling principles are presented based on using a two-fluid model in which lateral interfacial effects are accounted for. This model has been used to evaluate the velocity fields of both vapor and liquid phases, as well as phase distribution, between fuel elements in geometries similar to BWR fuel bundles. Furthermore, this model has been used to predict, in a detailed mechanistic manner, the effects of spacers on flow and phase distribution between, and pressure drop along, fuel elements. The related numerical simulations have been performed using a CFD computer code, CFDS-FLOW3D.

  6. Sequence organization of the Acanthamoeba rRNA intergenic spacer: identification of transcriptional enhancers.

    Science.gov (United States)

    Yang, Q; Zwick, M G; Paule, M R

    1994-01-01

    The primary sequence of the entire 2330 bp intergenic spacer of the A.castellanii ribosomal RNA gene was determined. Repeated sequence elements averaging 140 bp were identified and found to bind a protein required for optimum initiation at the core promoter. These repeated elements were shown to stimulate rRNA transcription by RNA polymerase I in vitro. The repeats inhibited transcription when placed in trans, and stimulated transcription when in cis, in either orientation, but only when upstream of the core promoter. Thus, these repeated elements have characteristics similar to polymerase I enhancers found in higher eukaryotes. The number of rRNA repeats in Acanthamoeba cells was determined to be 24 per haploid genome, the lowest number so far identified in any eukaryote. However, because Acanthamoeba is polyploid, each cell contains approximately 600 rRNA genes. Images PMID:7984432

  7. Nasal inhalation of budesonide from a spacer in children with perennial rhinitis and asthma

    DEFF Research Database (Denmark)

    Pedersen, W; Hjuler, Inga Merete; Bisgaard, H

    1998-01-01

    The standard treatment of allergic rhinitis and asthma consists of topical corticosteroids administered intranasally and inhaled through the mouth. Although this therapy is highly effective, and side-effects are few and mild, it may be possible further to improve the therapeutic index and patient...... compliance with the treatment. In the present study, we evaluated a nasal inhalation system used for the simultaneous treatment of rhinitis and asthma. In principle, it results in an airway deposition of the corticosteroid similar to that of inhaled allergens. Twenty-four children with perennial rhinitis...... and asthma inhaled budesonide through the nose from a pressurized aerosol, attached to a spacer device, in a double-blind, placebo-controlled, crossover study. Compared with placebo, budesonide treatment resulted in a significant reduction of nasal symptoms (Pasthma symptoms (P

  8. Measurement of paint-on die spacers used for casting relief.

    Science.gov (United States)

    Campagni, W V; Preston, J D; Reisbick, M H

    1982-06-01

    Three paints used for die spacing were measured for film thickness. Two of the materials are marketed as die spacers, and the third is sold as a model airplane paint. The materials were applied to stone dies in multiple coats. They were embedded in resin, sectioned, and measured photographically through a microscope. The three die spacing materials were capable of achieving clinically acceptable relief in the range of 20 to 40 mu by using a variable number of coats. Different paints produced different thicknesses. The two paints sold specifically for die spacing gave 11 to 13 mu per coat. The hobby shop paint had the smallest film thickness per coat, yielding approximately 5 mu per layer. It also had the smallest standard deviation. This control plus the relative low cost and availabilty make it attractive for this purpose.

  9. Clinical observation on the reconstruction of large areas lower eyelid defect with Medpor spacer graft

    Directory of Open Access Journals (Sweden)

    Hai-Yan Li

    2014-08-01

    Full Text Available AIM: To observe the effects of porous polyethylene(Medporas a spacer graft in the reconstruction of large areas eyelid defect after the operation of malignant tumors of lower eyelids.METHODS: Nineteen cases(19 eyesof malignant tumors of lower eyelid underwent the eyelid reconstruction were selected. Medpor lower eyelid inserts implantation were used to replace tarsal joint sliding conjunctival flap and pedicle flap, and repaired full-thickness lower eyelid defects then underwent eyelid reconstruction. RESULTS: Appearance of eyelids and functional improvements were satisfactory with no stimulation on the eyeball and no effect on the visual function. Implants is with no absorption, shift, exclusion or infection and no tumor recurrence in all cases during the follow up for 6-36mo.CONCLUSION: Medpor lower eyelid inserts implantation can instead tarsal plate for the reconstruction of medium to large areas lower eyelid defect, which is easy performing with rare complications. It is an ideal alternatives of tarsal plate.

  10. Optimisation of automated ribosomal intergenic spacer analysis for the estimation of microbial diversity in fynbos soil

    Directory of Open Access Journals (Sweden)

    Karin Jacobs

    2010-07-01

    Full Text Available Automated ribosomal intergenic spacer analysis (ARISA has become a commonly used molecular technique for the study of microbial populations in environmental samples. The reproducibility and accuracy of ARISA, with and without the polymerase chain reaction (PCR are important aspects that influence the results and effectiveness of these techniques. We used the primer set ITS4/ITS5 for ARISA to assess the fungal community composition of two sites situated in the Sand Fynbos. The primer set proved to deliver reproducible ARISA profiles of the fungal community composition with little variation observed between ARISA-PCRs. Variation that occurred in a sample due to repeated DNA extraction is expected for ecological studies. This reproducibility made ARISA a useful tool for the assessment and comparison of diversity in ecological samples. In this paper, we also offered particular suggestions concerning the binning strategy for the analysis of ARISA profiles.

  11. Preparation of the spacer for narrow electrode gap configuration in ionization-based gas sensor

    Energy Technology Data Exchange (ETDEWEB)

    Saheed, Mohamed Shuaib Mohamed; Mohamed, Norani Muti; Burhanudin, Zainal Arif [Electrical and Electronic Engineering, Universiti Teknologi PETRONAS, Seri Iskandar, Tronoh, Perak. (Malaysia); Fundamental and Applied Science, Universiti Teknologi PETRONAS, Seri Iskandar, Tronoh, Perak. (Malaysia); Electrical and Electronic Engineering, Universiti Teknologi PETRONAS, Seri Iskandar, Tronoh, Perak. (Malaysia)

    2012-09-26

    Carbon nanotubes (CNTs) have started to be developed as the sensing element for ionization-based gas sensors due to the demand for improved sensitivity, selectivity, stability and other sensing properties beyond what can be offered by the conventional ones. Although these limitations have been overcome, the problems still remain with the conventional ionization-based gas sensors in that they are bulky and operating with large breakdown voltage and high temperature. Recent studies have shown that the breakdown voltage can be reduced by using nanostructured electrodes and narrow electrode gap. Nanostructured electrode in the form of aligned CNTs array with evenly distributed nanotips can enhance the linear electric field significantly. The later is attributed to the shorter conductivity path through narrow electrode gap. The paper presents the study on the design consideration in order to realize ionization based gas sensor using aligned carbon nanotubes array in an optimum sensor configuration with narrow electrode gap. Several deposition techniques were studied to deposit the spacer, the key component that can control the electrode gap. Plasma spray deposition, electron beam deposition and dry oxidation method were employed to obtain minimum film thickness around 32 {mu}m. For plasma spray method, sand blasting process is required in order to produce rough surface for strong bonding of the deposited film onto the surface. Film thickness, typically about 39 {mu}m can be obtained. For the electron beam deposition and dry oxidation, the film thickness is in the range of nanometers and thus unsuitable to produce the spacer. The deposited multilayer film consisting of copper, alumina and ferum on which CNTs array will be grown was found to be removed during the etching process. This is attributed to the high etching rate on the thin film which can be prevented by reducing the rate and having a thicker conductive copper film.

  12. Effect of spacers on the thermal performance of an annular multi-layer insulation

    International Nuclear Information System (INIS)

    Haim, Y.; Weiss, Y.; Letan, R.

    2014-01-01

    The current study presents a model and is experimentally conducted in a system of 40 stainless steel coaxial foils, of nitrogen gas, entrapped between the foils, and of spacers, which are zirconia, spherical, 50 μm in size particles, widely dispersed in the gaps between the foils. The model, experimentally verified, relates to radiation between the foils, unobstructed by particles, to conduction in the nitrogen gas, and to conduction across the particles. The study was, in particular, aimed to measure the effective thermal conductivity of the particles and to assess its effect upon the array. At vacuum of 0.092 Pa, the effective thermal conductivity of the particles was 2.13 × 10 −4  W/m K, while the effective thermal conductivity of the array was 4.74 × 10 −4  W/m K. Thus, the low contribution of the particles conduction at vacuum conditions improves the insulation. It reaches 45% of the heat transfer rate. At atmospheric pressure, the effective thermal conductivity of the array reaches 4.5 × 10 −2  W/m K. There, the spacers contribution is negligible. - Highlights: •The multi-layer insulation of cylinder consists of foils separated by particles. •The particles are widely spaced in gaps. •Particles heat transfer rate is almost half of the total in vacuum. •At higher pressures the particles contribution is negligible. •The predicted thermal performance agrees with experimental results

  13. Controlling the Biomimetic Implant Interface: Modulating Antimicrobial Activity by Spacer Design

    Science.gov (United States)

    Wisdom, Cate; Vanoosten, Sarah Kay; Boone, Kyle W.; Khvostenko, Dmytro; Arnold, Paul M.; Snead, Malcolm L.; Tamerler, Candan

    2016-08-01

    Surgical site infection is a common cause of post-operative morbidity, often leading to implant loosening, ultimately requiring revision surgery, increased costs and worse surgical outcomes. Since implant failure starts at the implant surface, creating and controlling the bio-material interface will play a critical role in reducing infection while improving host cell-to-implant interaction. Here, we engineered a biomimetic interface based upon a chimeric peptide that incorporates a titanium binding peptide (TiBP) with an antimicrobial peptide (AMP) into a single molecule to direct binding to the implant surface and deliver an antimicrobial activity against S. mutans and S. epidermidis, two bacteria which are linked with clinical implant infections. To optimize antimicrobial activity, we investigated the design of the spacer domain separating the two functional domains of the chimeric peptide. Lengthening and changing the amino acid composition of the spacer resulted in an improvement of minimum inhibitory concentration by a three-fold against S. mutans. Surfaces coated with the chimeric peptide reduced dramatically the number of bacteria, with up to a nine-fold reduction for S. mutans and a 48-fold reduction for S. epidermidis. Ab initio predictions of antimicrobial activity based on structural features were confirmed. Host cell attachment and viability at the biomimetic interface were also improved compared to the untreated implant surface. Biomimetic interfaces formed with this chimeric peptide offer interminable potential by coupling antimicrobial and improved host cell responses to implantable titanium materials, and this peptide based approach can be extended to various biomaterials surfaces.

  14. Serine-based gemini surfactants with different spacer linkages: from self-assembly to DNA compaction.

    Science.gov (United States)

    Silva, Sandra G; Oliveira, Isabel S; do Vale, M Luísa C; Marques, Eduardo F

    2014-12-14

    Cationic gemini surfactants have strong potential as compaction agents of nucleic acids for efficient non-viral gene delivery. In this work, we present the aggregation behavior of three novel cationic serine-based gemini surfactants as well as their ability to compact DNA per se and mixed with a helper lipid, 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE). All the surfactants have a 12-12-12 configuration, i.e. two main 12-carbon alkyl chains linked to the nitrogen atom of the amino acid residue and a 12 methylene spacer, but they differ in the nature of the spacer linkage: for (12Ser)2N12, an amine bond; for (12Ser)2CON12, an amide bond; and for (12Ser)2COO12, an ester bond. Interestingly, while the amine-based gemini aggregates into micelles, the amide and ester ones spontaneously form vesicles, which denotes a strong influence of the type of linkage on the surfactant packing parameter. The size, ζ-potential and stability of the vesicles have been characterized by light microscopy, cryogenic scanning electron microscopy (cryo-SEM) and dynamic light scattering (DLS). The interaction of the gemini aggregates with DNA at different charge ratios and in the absence and presence of DOPE has been studied by DLS, fluorescence spectroscopy and cryo-SEM. All the compounds are found to efficiently compact DNA (complexation > 90%), but relevant differences are obtained in terms of the size, ζ-potential and stability of the lipoplexes formed. Results are rationalized in terms of headgroup differences and the type of aggregates present prior to DNA condensation.

  15. Close sequence identity between ribosomal DNA episomes of the ...

    Indian Academy of Sciences (India)

    In fact the spacer sequences were only slightly more divergent than the 18S rRNA gene sequence which differs by 1.6% in the two species. The most divergent sequence between E. histolytica and E. dispar was the internal transcribed spacer, ITS2. Therefore, it was concluded that probes derived from the ITS1 and ITS2 ...

  16. Symptomatic Citrus trees reveal a new pathogenic lineage in Fusarium and two new Neocosmospora species

    NARCIS (Netherlands)

    Sandoval-Denis, M.; Guarnaccia, V.; Polizzi, G.; Crous, P.W.

    2018-01-01

    The diversity of fusaria in symptomatic Citrus trees in Greece, Italy and Spain was evaluated using morphological and molecular multi-locus analyses based on fragments of the calmodulin (CAM), intergenic spacer region of the rDNA (IGS), internal transcribed spacer region of the rDNA (ITS), large

  17. An integrated taxonomic study of Fusarium langsethiae, Fusarium poae and Fusarium sporotrichioides based on the use of composite datasets

    DEFF Research Database (Denmark)

    Schmidt, H.; Adler, A.; Holst-Jensen, A.

    2004-01-01

    sporotrichioides using a composite dataset. This set consisted of DNA sequences derived from the ribosomal internal transcribed spacer (ITS) regions, partial sequences of the ribosomal intergenic spacer (IGS) region, the beta-tubulin and translation elongation factor-1 alpha (EF-1alpha) genes, AFLP fingerprints...

  18. Phylogeographic patterns of Armillaria ostoyae in the western United States

    Science.gov (United States)

    J. W. Hanna; N. B. Klopfenstein; M. -S. Kim; G. I. McDonald; J. A. Moore

    2007-01-01

    Nuclear ribosomal DNA regions (i.e. large subunit, internal transcribed spacer, 5.8S and intergenic spacer) were sequenced using a direct-polymerase chain reaction method from Armillaria ostoyae genets collected from the western USA. Many of the A. ostoyae genets contained heterogeneity among rDNA repeats, indicating intragenomic variation and likely intraspecific...

  19. Characterization of North American Armillaria species: Genetic relationships determined by ribosomal DNA sequences and AFLP markers

    Science.gov (United States)

    M. -S. Kim; N. B. Klopfenstein; J. W. Hanna; G. I. McDonald

    2006-01-01

    Phylogenetic and genetic relationships among 10 North American Armillaria species were analysed using sequence data from ribosomal DNA (rDNA), including intergenic spacer (IGS-1), internal transcribed spacers with associated 5.8S (ITS + 5.8S), and nuclear large subunit rDNA (nLSU), and amplified fragment length polymorphism (AFLP) markers. Based on rDNA sequence data,...

  20. Symptomatic Citrus trees reveal a new pathogenic lineage in Fusarium and two new Neocosmospora species

    NARCIS (Netherlands)

    Sandoval-Denis, Marcelo; Guarnaccia, Vladimiro; Polizzi, Giancarlo; Crous, P.W.

    The diversity of fusaria in symptomatic Citrus trees in Greece, Italy and Spain was evaluated using morphological and molecular multi-locus analyses based on fragments of the calmodulin (CAM), intergenic spacer region of the rDNA (IGS), internal transcribed spacer region of the rDNA (ITS), large

  1. Preventing Complications from High-Dose Rate Brachytherapy when Treating Mobile Tongue Cancer via the Application of a Modular Lead-Lined Spacer.

    Directory of Open Access Journals (Sweden)

    Shumei Murakami

    Full Text Available To point out the advantages and drawbacks of high-dose rate brachytherapy in the treatment of mobile tongue cancer and indicate the clinical importance of modular lead-lined spacers when applying this technique to patients.First, all basic steps to construct the modular spacer are shown. Second, we simulate and evaluate the dose rate reduction for a wide range of spacer configurations.With increasing distance to the source absorbed doses dropped considerably. Significantly more shielding was obtained when lead was added to the spacer and this effect was most pronounced on shorter (i.e. more clinically relevant distances to the source.The modular spacer represents an important addition to the planning and treatment stages of mobile tongue cancer using HDR-ISBT.

  2. Effect of the spacer group nature on the optical and electrical properties of confined poly( p-phenylene vinylene) derivatives

    Science.gov (United States)

    Benzarti-Ghédira, Maha; Zahou, Imen; Hrichi, Haikel; Jaballah, Nejmeddine; Ben Chaâbane, Rafik; Majdoub, Mustapha; Ben Ouada, Hafedh

    2015-09-01

    This study is an investigation about the effect of chemical modification on the morphological, optical and electrical properties of semiconducting organic thin films. Two confined poly( p-phenylene vinylene) (PPV)-type polymers containing different spacer groups were studied: P1 has an isopropylidene spacer group and P2 with hexafluoroisopropylidene spacer. The UV-Vis absorption and PL analysis showed a stronger π- π interaction in the P1 film; in P2, the π-stacking is limited by the introduction of a bulky trifluoromethyl (CF3) groups on the spacer units. The P2 exhibits a better film quality as illustrated by the atomic force microscopy. The HOMO and LUMO energy levels and electrochemical band gap of the polymers were determinate by the cyclic voltammetry. The electrical properties of ITO/PPV derivative/Al diodes were investigated by means of current-voltage and show a space-charge-limited current conduction mechanism with higher mobility in the P2 thin layer. The impedance spectra of the devices can be discussed in terms of an equivalent circuit model designed as a parallel resistance ( R p) and capacitance ( C p) network in series with a resistance.

  3. An improved PCR method for direct identification of Porphyra (Bangiales, Rhodophyta) using conchocelis based on a RUBISCO intergenic spacer

    Science.gov (United States)

    Wang, Chao; Dong, Dong; Wang, Guangce; Zhang, Baoyu; Peng, Guang; Xu, Pu; Tang, Xiaorong

    2009-09-01

    An improved method of PCR in which the small segment of conchocelis is amplified directly without DNA extraction was used to amplify a RUBISCO intergenic spacer DNA fragment from nine species of red algal genus Porphyra (Bangiales, Rhodophyta), including Porphyra yezoensis (Jiangsu, China), P. haitanensis (Fujian, China), P. oligospermatangia (Qingdao, China), P. katadai (Qingdao, China), P. tenera (Qingdao, China), P. suborboculata (Fujian, China), P. pseudolinearis (Kogendo, Korea), P. linearis (Devon, England), and P. fallax (Seattle, USA). Standard PCR and the method developed here were both conducted using primers specific for the RUBISCO spacer region, after which the two PCR products were sequenced. The sequencing data of the amplicons obtained using both methods were identical, suggesting that the improved PCR method was functional. These findings indicate that the method developed here may be useful for the rapid identification of species of Porphyra in a germplasm bank. In addition, a phylogenetic tree was constructed using the RUBISCO spacer and partial rbcS sequence, and the results were in concordant with possible alternative phylogenies based on traditional morphological taxonomic characteristics, indicating that the RUBISCO spacer is a useful region for phylogenetic studies.

  4. Factors affecting the efficiency of aerosolized salbutamol delivery via a metered dose inhaler and equine spacer device.

    Science.gov (United States)

    Pirie, R S; McGorum, B C; Owen, C; Carr, O; Oakley, H; McLachlan, G

    2017-06-01

    Despite frequent use of metered dose inhalers (MDIs) and spacers in equine practice, limited information exists on the efficiency of aerosol delivery using such devices. We determined the particle size distribution within an MDI-generated salbutamol aerosol delivered via an equine spacer using 'best practice' delivery technique and assessed the effect of variations in MDI use technique (shaking prior to each actuation, rapid repetitive actuations, and MDI angulation) on aerosol delivery efficiency. Under optimal conditions, only 53(±18) μg salbutamol per 100 μg actuation was delivered beyond the spacer. Although this aerosol had a high [89.6% (±2.4)] fine particle (aerodynamic diameter [2.52 (±0.29) μm], and particle size variability [geometric SD - 1.66 (±0.16) μm], within all particle size fractions, there was a high coefficient of variance (31-79%) of the percentage salbutamol delivered between experimental runs, thus impeding any effort to predict drug delivery to the patient during equine inhalation therapy. Despite observable trends and with the exception of minor statistically significant changes in the least abundant particle sizes, none of the deviations from a 'best practice' delivery technique significantly altered the relative salbutamol delivery beyond the spacer, a finding which has potential relevance with regard to maintaining user compliance. © 2016 John Wiley & Sons Ltd.

  5. Discriminating 16Sr groups of phytoplasma by an oligonucleotide microarray targeting 16S-23S ribosomal spacer

    Czech Academy of Sciences Publication Activity Database

    Lenz, Ondřej; Marková, J.; Sarkisova, Tatiana

    2011-01-01

    Roč. 64, Suppl. (2011), s. 31-32 ISSN 1721-8861 R&D Projects: GA ČR GP522/09/P545 Institutional research plan: CEZ:AV0Z50510513 Keywords : phytoplasmas * detection * 16Sr groups * ribosomal spacer * microarray Subject RIV: EE - Microbiology, Virology Impact factor: 0.592, year: 2011

  6. Bronchodilation and bronchoprotection in asthmatic preschool children from formoterol administered by mechanically actuated dry-powder inhaler and spacer

    DEFF Research Database (Denmark)

    Nielsen, K G; Bisgaard, H

    2001-01-01

    We evaluated the bronchodilatory and the bronchoprotective effect of the long-acting beta(2)-agonist formoterol administered as dry powder from a mechanically actuated dry-powder inhaler (DPI) using spacer in 12 asthmatic children 2 to 5 yr of age. Lung function was measured as the specific airwa...

  7. Superiority of Spacer/Mask Topical Anesthetic Compared with Conventional Spray and Gargle Method for Fibreoptic Bronchoscopy

    Directory of Open Access Journals (Sweden)

    RC Balkissoon

    1996-01-01

    Full Text Available OBJECTIVE: To compare the safety and efficacy of a new spacer-oral nasal mask device with those of the standard needle nozzle spray method for the delivery of aerosolized lidocaine to the upper airway for pre-bronchoscopic anaesthesia in a tertiary care hospital.

  8. Enhancement of the superconducting transition temperature of FeSe by intercalation of a molecular spacer layer.

    Science.gov (United States)

    Burrard-Lucas, Matthew; Free, David G; Sedlmaier, Stefan J; Wright, Jack D; Cassidy, Simon J; Hara, Yoshiaki; Corkett, Alex J; Lancaster, Tom; Baker, Peter J; Blundell, Stephen J; Clarke, Simon J

    2013-01-01

    The discovery of high-temperature superconductivity in a layered iron arsenide has led to an intensive search to optimize the superconducting properties of iron-based superconductors by changing the chemical composition of the spacer layer between adjacent anionic iron arsenide layers. Superconductivity has been found in iron arsenides with cationic spacer layers consisting of metal ions (for example, Li(+), Na(+), K(+), Ba(2+)) or PbO- or perovskite-type oxide layers, and also in Fe(1.01)Se (ref. 8) with neutral layers similar in structure to those found in the iron arsenides and no spacer layer. Here we demonstrate the synthesis of Li(x)(NH(2))(y)(NH(3))(1-y)Fe(2)Se(2) (x~0.6; y~0.2), with lithium ions, lithium amide and ammonia acting as the spacer layer between FeSe layers, which exhibits superconductivity at 43(1) K, higher than in any FeSe-derived compound reported so far. We have determined the crystal structure using neutron powder diffraction and used magnetometry and muon-spin rotation data to determine the superconducting properties. This new synthetic route opens up the possibility of further exploitation of related molecular intercalations in this and other systems to greatly optimize the superconducting properties in this family.

  9. Rheological response of methylcellulose toward alkanediyl-α,ω-bis(dimethylcetylammonium bromide) surfactants with varying spacer length.

    Science.gov (United States)

    Shah, Rais Ahmad; Chat, Oyais Ahmad; Maswal, Masrat; Rather, Ghulam Mohammad; Dar, Aijaz Ahmad

    2016-06-25

    The modulation of properties of methylcellulose (MC) by cationic gemini surfactants with varying spacer lengths was studied employing tensiometry, rheometry and turbidimetry. Surface tension measurements anticipate that the gemini surfactant with longer spacer chain length saturates MC at lower concentrations owing to its greater hydrophobicity compared to shorter spacer analogues. Rheometric and turbidimetric measurements suggest that at very low concentrations of gemini surfactants, ion-dipole type of interactions between MC and gemini surfactants promote the extension of polymer chains which is manifested by an initial increase in the low shear viscosity and gelation temperature of MC-gemini surfactant systems, and lowering of turbidity. Such interactions were found to be stronger in case of 16-4-16 than 16-5-16, and almost absent in case of 16-6-16 surfactant system. However at concentrations above CAC, hydrophobic forces operative between MC and gemini surfactants were found to be more for 16-6-16 than that of 16-5-16 and 16-4-16. The final levelling of MC viscosity in presence of all the three gemini surfactants and the variation of gelation temperature suggests the solubilization of network junctions in the surfactant micelles. Moreover, the presence of gemini surfactant strongly affects the interaction of MC with a model hydrophobic drug rifampicin.The results highlight the importance of gemini surfactants and their spacer length in controlling the structural dynamics of MC and its effective use in pharmaceutical and food industry. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. CTF/STAR-CD off-line coupling for simulation of crossflow caused by mixing vane spacers in rod bundles

    International Nuclear Information System (INIS)

    Avramova, Maria

    2011-01-01

    Understanding the impact of the spacer grids on the reactor core thermal-hydraulics involves experimental mockup tests, numerical simulations, and development of reliable empirical or semi-empirical models. The state-of-the-art in modeling spacer effects on the thermal-hydraulic performance of the flow in Light Water Reactor (LWR) rod bundles employs numerical experiments by means of Computational Fluid Dynamics (CFD) calculations. The capabilities of the CFD codes are usually being validated against mock-up tests. Once validated, the CFD predictions can be used for improvement and development of more sophisticated models of the subchannel codes. Because of the involved computational cost, CFD codes can not be yet efficiently utilized for full bundle predictions, while advanced subchannel codes are a powerful tool for LWR safety and design analyses. Subchannel analyses are used for whole LWR core evaluations with relatively short CPU times and reasonable computer resources. The objectives of the presented work were to develop, implement, and qualify an innovative spacer grid model utilizing the Computational Fluid Dynamics within a framework of an efficient subchannel analysis tool. A methodology was developed for off-line coupling between the CFD code STAR-CD and the subchannel code CTF. The developed coupling scheme is flexible in axial mesh overlays. It was developed to be easily adapted to any pair of a CFD and a subchannel code. Separate modeling of the spacer grid effects on the diffusive and on the convective processes was implemented and successfully validated against experimental data. (author)

  11. Preliminary Investigation on Turbulent Flow in Tight-lattice Rod Bundle with Twist-mixing Vane Spacer Grid

    International Nuclear Information System (INIS)

    Lee, Chiyoung; Kwack, Youngkyun; Park, Juyong; Shin, Changhwan; In, Wangkee

    2013-01-01

    Our research group has investigated the effect of P/D difference on the behavior of turbulent rod bundle flow without the mixing vane spacer grid, using PIV (Particle Image Velocimetry) and MIR (Matching Index of Refraction) techniques for tight lattice fuel rod bundle application. In this work, using the tight-lattice rod bundle with a twist-mixing vane spacer grid, the turbulent rod bundle flow is preliminarily examined to validate the PIV measurement and CFD (Computational Fluid Dynamics) simulation. The turbulent flow in the tight-lattice rod bundle with a twist-mixing vane spacer grid was preliminarily examined to validate the PIV measurement and CFD simulation. Both were in agreement with each other within a reasonable degree of accuracy. Using PIV measurement and CFD simulation tested in this work, the detailed investigations on the behavior of turbulent rod bundle flow with the twist-mixing vane spacer grid will be performed at various conditions, and reported in the near future

  12. On the Origin of Reverse Transcriptase-Using CRISPR-Cas Systems and Their Hyperdiverse, Enigmatic Spacer Repertoires.

    Science.gov (United States)

    Silas, Sukrit; Makarova, Kira S; Shmakov, Sergey; Páez-Espino, David; Mohr, Georg; Liu, Yi; Davison, Michelle; Roux, Simon; Krishnamurthy, Siddharth R; Fu, Becky Xu Hua; Hansen, Loren L; Wang, David; Sullivan, Matthew B; Millard, Andrew; Clokie, Martha R; Bhaya, Devaki; Lambowitz, Alan M; Kyrpides, Nikos C; Koonin, Eugene V; Fire, Andrew Z

    2017-07-11

    Cas1 integrase is the key enzyme of the clustered regularly interspaced short palindromic repeat (CRISPR)-Cas adaptation module that mediates acquisition of spacers derived from foreign DNA by CRISPR arrays. In diverse bacteria, the cas1 gene is fused (or adjacent) to a gene encoding a reverse transcriptase (RT) related to group II intron RTs. An RT-Cas1 fusion protein has been recently shown to enable acquisition of CRISPR spacers from RNA. Phylogenetic analysis of the CRISPR-associated RTs demonstrates monophyly of the RT-Cas1 fusion, and coevolution of the RT and Cas1 domains. Nearly all such RTs are present within type III CRISPR-Cas loci, but their phylogeny does not parallel the CRISPR-Cas type classification, indicating that RT-Cas1 is an autonomous functional module that is disseminated by horizontal gene transfer and can function with diverse type III systems. To compare the sequence pools sampled by RT-Cas1-associated and RT-lacking CRISPR-Cas systems, we obtained samples of a commercially grown cyanobacterium- Arthrospira platensis Sequencing of the CRISPR arrays uncovered a highly diverse population of spacers. Spacer diversity was particularly striking for the RT-Cas1-containing type III-B system, where no saturation was evident even with millions of sequences analyzed. In contrast, analysis of the RT-lacking type III-D system yielded a highly diverse pool but reached a point where fewer novel spacers were recovered as sequencing depth was increased. Matches could be identified for a small fraction of the non-RT-Cas1-associated spacers, and for only a single RT-Cas1-associated spacer. Thus, the principal source(s) of the spacers, particularly the hypervariable spacer repertoire of the RT-associated arrays, remains unknown. IMPORTANCE While the majority of CRISPR-Cas immune systems adapt to foreign genetic elements by capturing segments of invasive DNA, some systems carry reverse transcriptases (RTs) that enable adaptation to RNA molecules. From

  13. The Dictyostelium discoideum acaA gene is transcribed from alternative promoters during aggregation and multicellular development.

    Directory of Open Access Journals (Sweden)

    Maria Galardi-Castilla

    Full Text Available BACKGROUND: Extracellular cAMP is a key extracellular signaling molecule that regulates aggregation, cell differentiation and morphogenesis during multi-cellular development of the social amoeba Dictyostelium discoideum. This molecule is produced by three different adenylyl cyclases, encoded by the genes acaA, acrA and acgA, expressed at different stages of development and in different structures. METHODOLOGY/PRINCIPAL FINDINGS: This article describes the characterization of the promoter region of the acaA gene, showing that it is transcribed from three different alternative promoters. The distal promoter, promoter 1, is active during the aggregation process while the more proximal promoters are active in tip-organiser and posterior regions of the structures. A DNA fragment containing the three promoters drove expression to these same regions and similar results were obtained by in situ hybridization. Analyses of mRNA expression by quantitative RT-PCR with specific primers for each of the three transcripts also demonstrated their different temporal patterns of expression. CONCLUSIONS/SIGNIFICANCE: The existence of an aggregation-specific promoter can be associated with the use of cAMP as chemo-attractant molecule, which is specific for some Dictyostelium species. Expression at late developmental stages indicates that adenylyl cyclase A might play a more important role in post-aggregative development than previously considered.

  14. A 3'-coterminal nested set of independently transcribed mRNAs is generated during Berne virus replication

    International Nuclear Information System (INIS)

    Snijder, E.J.; Horzinek, M.C.; Spaan, W.J.

    1990-01-01

    By using poly(A)-selected RNA from Berne virus (BEV)-infected embryonic mule skin cells as a template, cDNA was prepared and cloned in plasmid pUC9. Recombinants covering a contiguous sequence of about 10 kilobases were identified. Northern (RNA) blot hybridizations with various restriction fragments from these clones showed that the five BEV mRNAs formed a 3'-coterminal nested set. Sequence analysis revealed the presence of four complete open reading frames of 4743, 699, 426, and 480 nucleotides, with initiation codons coinciding with the 5' ends of BEV RNAs 2 through 5, respectively. By using primer extension analysis and oligonucleotide hybridizations, RNA 5 was found to be contiguous on the consensus sequence. The transcription of BEV mRNAs was studied by means of UV mapping. BEV RNAs 1, 2, and 3 were shown to be transcribed independently, which is also likely--although not rigorously proven--for RNAs 4 and 5. Upstream of the AUG codon of each open reading frame a conserved sequence pattern was observed which is postulated to function as a core promoter sequence in subgenomic RNA transcription. In the area surrounding the core promoter region of the two most abundant subgenomic BEV RNAs, a number of homologous sequence motifs were identified

  15. Detection of Abundantly Transcribed Genes and Gene Translocation in Human Immunodeficiency Virus-Associated Non—Hodgkin's Lymphoma

    Directory of Open Access Journals (Sweden)

    V. Tarantul

    2001-01-01

    Full Text Available Several novel, differentially transcribed genes were identified in one centroblastic and one immunoblastic HIV-associated B-cell non-Hodgkin's lymphoma (BNHL by subtractive cloning. In both lymphomas, we detected an upregulated transcription of several mitochondrial genes. In the centroblastic B-NHL, we found a high level transcription of nuclear genes including the interferon-inducible gene (INF-ind, the immunoglobulin light chain gene (IgL, the set oncogene, and several unknown genes. The data obtained on upregulated expression of the genes in human B-NHL of HIV-infected patients considerably overlap with those obtained earlier for the B-NHL of simian immunodeficiency virus-infected monkeys. In the centroblastic lymphoma, one transcript revealed a fusion of the 3'-untranslated region of the set gene and the C-terminal region of the IgL gene. This chimeric sequence was confirmed by a site-directed polymerase chain reaction performed with total cDNA and genomic DNA. The expected amplification product was obtained in both cases pointing to a genomic rearrangement. The IgL-set fusion sequence was not found in cDNA preparations and genomic DNA of the immunoblastic HIV-associated B-NHL. Further studies are necessary to determine whether these genes contribute to lymphoma development or can be used as therapeutic targets.

  16. Experimental and numerical characterization of the water flow in spacer-filled channels of spiral-wound membranes

    KAUST Repository

    Bucs, Szilard

    2015-09-25

    Micro-scale flow distribution in spacer-filled flow channels of spiral-wound membrane modules was determined with a particle image velocimetry system (PIV), aiming to elucidate the flow behaviour in spacer-filled flow channels. Two-dimensional water velocity fields were measured in a flow cell (representing the feed spacer-filled flow channel of a spiral wound reverse osmosis membrane module without permeate production) at several planes throughout the channel height. At linear flow velocities (volumetric flow rate per cross-section of the flow channel considering the channel porosity, also described as crossflow velocities) used in practice (0.074 and 0.163 m∙s-1) the recorded flow was laminar with only slight unsteadiness in the upper velocity limit. At higher linear flow velocity (0.3 m∙s-1) the flow was observed to be unsteady and with recirculation zones. Measurements made at different locations in the flow cell exhibited very similar flow patterns within all feed spacer mesh elements, thus revealing the same hydrodynamic conditions along the length of the flow channel. Three-dimensional (3-D) computational fluid dynamics simulations were performed using the same geometries and flow parameters as the experiments, based on steady laminar flow assumption. The numerical results were in good agreement (0.85-0.95 Bray-Curtis similarity) with the measured flow fields at linear velocities of 0.074 and 0.163 m∙s-1, thus supporting the use of model-based studies in the optimization of feed spacer geometries and operational conditions of spiral wound membrane systems.

  17. Experimental and numerical characterization of the water flow in spacer-filled channels of spiral-wound membranes.

    Science.gov (United States)

    Bucs, Szilard S; Linares, Rodrigo Valladares; Marston, Jeremy O; Radu, Andrea I; Vrouwenvelder, Johannes S; Picioreanu, Cristian

    2015-12-15

    Micro-scale flow distribution in spacer-filled flow channels of spiral-wound membrane modules was determined with a particle image velocimetry system (PIV), aiming to elucidate the flow behaviour in spacer-filled flow channels. Two-dimensional water velocity fields were measured in a flow cell (representing the feed spacer-filled flow channel of a spiral wound reverse osmosis membrane module without permeate production) at several planes throughout the channel height. At linear flow velocities (volumetric flow rate per cross-section of the flow channel considering the channel porosity, also described as crossflow velocities) used in practice (0.074 and 0.163 m·s(-1)) the recorded flow was laminar with only slight unsteadiness in the upper velocity limit. At higher linear flow velocity (0.3 m·s(-1)) the flow was observed to be unsteady and with recirculation zones. Measurements made at different locations in the flow cell exhibited very similar flow patterns within all feed spacer mesh elements, thus revealing the same hydrodynamic conditions along the length of the flow channel. Three-dimensional (3-D) computational fluid dynamics simulations were performed using the same geometries and flow parameters as the experiments, based on steady laminar flow assumption. The numerical results were in good agreement (0.85-0.95 Bray-Curtis similarity) with the measured flow fields at linear velocities of 0.074 and 0.163 m·s(-1), thus supporting the use of model-based studies in the optimization of feed spacer geometries and operational conditions of spiral wound membrane systems. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Intensity Modulated Proton and Photon Therapy for Early Prostate Cancer With or Without Transperineal Injection of a Polyethylen Glycol Spacer: A Treatment Planning Comparison Study

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Damien C., E-mail: damien.weber@unige.ch [Department of Radiation Oncology, Geneva University Hospital, Geneva (Switzerland); Zilli, Thomas [Department of Radiation Oncology, Geneva University Hospital, Geneva (Switzerland); Vallee, Jean Paul [Department of Diagnostic Radiology, Geneva University Hospital, Geneva (Switzerland); Rouzaud, Michel; Miralbell, Raymond [Department of Radiation Oncology, Geneva University Hospital, Geneva (Switzerland); Cozzi, Luca [Oncology Institute of Southern Switzerland, Medical Physics Unit, Bellinzona (Switzerland)

    2012-11-01

    Purpose: Rectal toxicity is a serious adverse effect in early-stage prostate cancer patients treated with curative radiation therapy (RT). Injecting a spacer between Denonvilliers' fascia increases the distance between the prostate and the anterior rectal wall and may thus decrease the rectal radiation-induced toxicity. We assessed the dosimetric impact of this spacer with advanced delivery RT techniques, including intensity modulated RT (IMRT), volumetric modulated arc therapy (VMAT), and intensity modulated proton beam RT (IMPT). Methods and Materials: Eight prostate cancer patients were simulated for RT with or without spacer. Plans were computed for IMRT, VMAT, and IMPT using the Eclipse treatment planning system using both computed tomography spacer+ and spacer- data sets. Prostate {+-} seminal vesicle planning target volume [PTV] and organs at risk (OARs) dose-volume histograms were calculated. The results were analyzed using dose and volume metrics for comparative planning. Results: Regardless of the radiation technique, spacer injection decreased significantly the rectal dose in the 60- to 70-Gy range. Mean V{sub 70Gy} and V{sub 60Gy} with IMRT, VMAT, and IMPT planning were 5.3 {+-} 3.3%/13.9 {+-} 10.0%, 3.9 {+-} 3.2%/9.7 {+-} 5.7%, and 5.0 {+-} 3.5%/9.5 {+-} 4.7% after spacer injection. Before spacer administration, the corresponding values were 9.8 {+-} 5.4% (P=.012)/24.8 {+-} 7.8% (P=.012), 10.1 {+-} 3.0% (P=.002)/17.9 {+-} 3.9% (P=.003), and 9.7 {+-} 2.6% (P=.003)/14.7% {+-} 2.7% (P=.003). Importantly, spacer injection usually improved the PTV coverage for IMRT. With this technique, mean V{sub 70.2Gy} (P=.07) and V{sub 74.1Gy} (P=0.03) were 100 {+-} 0% to 99.8 {+-} 0.2% and 99.1 {+-} 1.2% to 95.8 {+-} 4.6% with and without Spacer, respectively. As a result of spacer injection, bladder doses were usually higher but not significantly so. Only IMPT managed to decrease the rectal dose after spacer injection for all dose levels, generally with no

  19. Strand bias in complementary single-nucleotide polymorphisms of transcribed human sequences: evidence for functional effects of synonymous polymorphisms

    Directory of Open Access Journals (Sweden)

    Majewski Jacek

    2006-08-01

    Full Text Available Abstract Background Complementary single-nucleotide polymorphisms (SNPs may not be distributed equally between two DNA strands if the strands are functionally distinct, such as in transcribed genes. In introns, an excess of A↔G over the complementary C↔T substitutions had previously been found and attributed to transcription-coupled repair (TCR, demonstrating the valuable functional clues that can be obtained by studying such asymmetry. Here we studied asymmetry of human synonymous SNPs (sSNPs in the fourfold degenerate (FFD sites as compared to intronic SNPs (iSNPs. Results The identities of the ancestral bases and the direction of mutations were inferred from human-chimpanzee genomic alignment. After correction for background nucleotide composition, excess of A→G over the complementary T→C polymorphisms, which was observed previously and can be explained by TCR, was confirmed in FFD SNPs and iSNPs. However, when SNPs were separately examined according to whether they mapped to a CpG dinucleotide or not, an excess of C→T over G→A polymorphisms was found in non-CpG site FFD SNPs but was absent from iSNPs and CpG site FFD SNPs. Conclusion The genome-wide discrepancy of human FFD SNPs provides novel evidence for widespread selective pressure due to functional effects of sSNPs. The similar asymmetry pattern of FFD SNPs and iSNPs that map to a CpG can be explained by transcription-coupled mechanisms, including TCR and transcription-coupled mutation. Because of the hypermutability of CpG sites, more CpG site FFD SNPs are relatively younger and have confronted less selection effect than non-CpG FFD SNPs, which can explain the asymmetric discrepancy of CpG site FFD SNPs vs. non-CpG site FFD SNPs.

  20. Innovative approach for transcriptomic analysis of obligate intracellular pathogen: selective capture of transcribed sequences of Ehrlichia ruminantium.

    Science.gov (United States)

    Emboulé, Loïc; Daigle, France; Meyer, Damien F; Mari, Bernard; Pinarello, Valérie; Sheikboudou, Christian; Magnone, Virginie; Frutos, Roger; Viari, Alain; Barbry, Pascal; Martinez, Dominique; Lefrançois, Thierry; Vachiéry, Nathalie

    2009-12-24

    Whole genome transcriptomic analysis is a powerful approach to elucidate the molecular mechanisms controlling the pathogenesis of obligate intracellular bacteria. However, the major hurdle resides in the low quantity of prokaryotic mRNAs extracted from host cells. Our model Ehrlichia ruminantium (ER), the causative agent of heartwater, is transmitted by tick Amblyomma variegatum. This bacterium affects wild and domestic ruminants and is present in Sub-Saharan Africa and the Caribbean islands. Because of its strictly intracellular location, which constitutes a limitation for its extensive study, the molecular mechanisms involved in its pathogenicity are still poorly understood. We successfully adapted the SCOTS method (Selective Capture of Transcribed Sequences) on the model Rickettsiales ER to capture mRNAs. Southern Blots and RT-PCR revealed an enrichment of ER's cDNAs and a diminution of ribosomal contaminants after three rounds of capture. qRT-PCR and whole-genome ER microarrays hybridizations demonstrated that SCOTS method introduced only a limited bias on gene expression. Indeed, we confirmed the differential gene expression between poorly and highly expressed genes before and after SCOTS captures. The comparative gene expression obtained from ER microarrays data, on samples before and after SCOTS at 96 hpi was significantly correlated (R2 = 0.7). Moreover, SCOTS method is crucial for microarrays analysis of ER, especially for early time points post-infection. There was low detection of transcripts for untreated samples whereas 24% and 70.7% were revealed for SCOTS samples at 24 and 96 hpi respectively. We conclude that this SCOTS method has a key importance for the transcriptomic analysis of ER and can be potentially used for other Rickettsiales. This study constitutes the first step for further gene expression analyses that will lead to a better understanding of both ER pathogenicity and the adaptation of obligate intracellular bacteria to their environment.

  1. Innovative approach for transcriptomic analysis of obligate intracellular pathogen: selective capture of transcribed sequences of Ehrlichia ruminantium

    Directory of Open Access Journals (Sweden)

    Lefrançois Thierry

    2009-12-01

    Full Text Available Abstract Background Whole genome transcriptomic analysis is a powerful approach to elucidate the molecular mechanisms controlling the pathogenesis of obligate intracellular bacteria. However, the major hurdle resides in the low quantity of prokaryotic mRNAs extracted from host cells. Our model Ehrlichia ruminantium (ER, the causative agent of heartwater, is transmitted by tick Amblyomma variegatum. This bacterium affects wild and domestic ruminants and is present in Sub-Saharan Africa and the Caribbean islands. Because of its strictly intracellular location, which constitutes a limitation for its extensive study, the molecular mechanisms involved in its pathogenicity are still poorly understood. Results We successfully adapted the SCOTS method (Selective Capture of Transcribed Sequences on the model Rickettsiales ER to capture mRNAs. Southern Blots and RT-PCR revealed an enrichment of ER's cDNAs and a diminution of ribosomal contaminants after three rounds of capture. qRT-PCR and whole-genome ER microarrays hybridizations demonstrated that SCOTS method introduced only a limited bias on gene expression. Indeed, we confirmed the differential gene expression between poorly and highly expressed genes before and after SCOTS captures. The comparative gene expression obtained from ER microarrays data, on samples before and after SCOTS at 96 hpi was significantly correlated (R2 = 0.7. Moreover, SCOTS method is crucial for microarrays analysis of ER, especially for early time points post-infection. There was low detection of transcripts for untreated samples whereas 24% and 70.7% were revealed for SCOTS samples at 24 and 96 hpi respectively. Conclusions We conclude that this SCOTS method has a key importance for the transcriptomic analysis of ER and can be potentially used for other Rickettsiales. This study constitutes the first step for further gene expression analyses that will lead to a better understanding of both ER pathogenicity and the adaptation

  2. Evidence for preferential copackaging of Moloney murine leukemia virus genomic RNAs transcribed in the same chromosomal site

    Directory of Open Access Journals (Sweden)

    Osipovich Anna B

    2005-01-01

    Full Text Available Abstract Background Retroviruses have a diploid genome and recombine at high frequency. Recombinant proviruses can be generated when two genetically different RNA genomes are packaged into the same retroviral particle. It was shown in several studies that recombinant proviruses could be generated in each round of HIV-1 replication, whereas the recombination rates of SNV and Mo-MuLV are 5 to 10-fold lower. The reason for these differences is not clear. One possibility is that these retroviruses may differ in their ability to copackage genomic RNAs produced at different chromosomal loci. Results To investigate whether there is a difference in the efficiency of heterodimer formation when two proviruses have the same or different chromosomal locations, we introduced two different Mo-MuLV-based retroviral vectors into the packaging cell line using either the cotransfection or sequential transfection procedure. The comparative study has shown that the frequency of recombination increased about four-fold when the cotransfection procedure was used. This difference was not associated with possible recombination of retroviral vectors during or after cotransfection and the ratios of retroviral virion RNAs were the same for two variants of transfection. Conclusions The results of this study indicate that a mechanism exists to enable the preferential copackaging of Mo-MuLV genomic RNA molecules that are transcribed on the same DNA template. The properties of Mo-MuLV genomic RNAs transport, processing or dimerization might be responsible for this preference. The data presented in this report can be useful when designing methods to study different aspects of replication and recombination of a diploid retroviral genome.

  3. Priming in the Type I-F CRISPR-Cas system triggers strand-independent spacer acquisition, bi-directionally from the primed protospacer.

    Science.gov (United States)

    Richter, Corinna; Dy, Ron L; McKenzie, Rebecca E; Watson, Bridget N J; Taylor, Corinda; Chang, James T; McNeil, Matthew B; Staals, Raymond H J; Fineran, Peter C

    2014-07-01

    Clustered regularly interspaced short palindromic repeats (CRISPR), in combination with CRISPR associated (cas) genes, constitute CRISPR-Cas bacterial adaptive immune systems. To generate immunity, these systems acquire short sequences of nucleic acids from foreign invaders and incorporate these into their CRISPR arrays as spacers. This adaptation process is the least characterized step in CRISPR-Cas immunity. Here, we used Pectobacterium atrosepticum to investigate adaptation in Type I-F CRISPR-Cas systems. Pre-existing spacers that matched plasmids stimulated hyperactive primed acquisition and resulted in the incorporation of up to nine new spacers across all three native CRISPR arrays. Endogenous expression of the cas genes was sufficient, yet required, for priming. The new spacers inhibited conjugation and transformation, and interference was enhanced with increasing numbers of new spacers. We analyzed ∼ 350 new spacers acquired in priming events and identified a 5'-protospacer-GG-3' protospacer adjacent motif. In contrast to priming in Type I-E systems, new spacers matched either plasmid strand and a biased distribution, including clustering near the primed protospacer, suggested a bi-directional translocation model for the Cas1:Cas2-3 adaptation machinery. Taken together these results indicate priming adaptation occurs in different CRISPR-Cas systems, that it can be highly active in wild-type strains and that the underlying mechanisms vary. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.

  4. Investigation of Al2O3 and ZrO2 spacer layers for fully printable and hole-conductor-free mesoscopic perovskite solar cells

    Science.gov (United States)

    Meng, Zheng; Guo, Daipeng; Yu, Jiaguo; Fan, Ke

    2018-02-01

    Fully printable and hole-conductor-free mesoscopic perovskite solar cells (PSCs) were prepared with Al2O3 or ZrO2 spacer layer. Mesoscopic TiO2 and the spacer layer were used as the scaffold in the PSC. The PSC based on mesoporous ZrO2 spacer layer obtains the short-circuit current density (Jsc) of 20.2 mA cm-2 and photoelectric conversion efficiency (PCE) of 8.72%, which are 23.17% and 59.12% higher than those of PSCs based on mesoporous Al2O3 spacer layer, respectively. Comparing with Al2O3, the larger pores of ZrO2 spacer layer are favorable for the infiltration and crystallization of perovskite, generating large grains to reduce the crystal boundaries. Hence, ZrO2 possesses superior performance than Al2O3 as the spacer layer for PSCs. This study can provide a guide for the rational design of efficient spacer layers for high-performance and hole-conductor-free PSCs.

  5. Artifacts in spine magnetic resonance imaging due to different intervertebral test spacers: an in vitro evaluation of magnesium versus titanium and carbon-fiber-reinforced polymers as biomaterials

    Energy Technology Data Exchange (ETDEWEB)

    Ernstberger, Thorsten [Klinikum Bad Bramstedt, Center for Spinal Surgery, Bad Bramstedt (Germany); Buchhorn, Gottfried [University of Gottingen, Biomaterial Laboratory, Department of Orthopedic Surgery, Goettingen (Germany); Heidrich, Gabert [University of Gottingen, Department of Diagnostic Radiology, Goettingen (Germany)

    2009-08-15

    Intervertebral spacers are made of different materials, which can affect the postfusion magnetic imaging (MRI) scans. Susceptibility artifacts especially for metallic implants can decrease the image quality. This study aimed to determine whether magnesium as a lightweight and biocompatible metal is suitable as a biomaterial for spinal implants based on its MRI artifacting behavior. To compare artifacting behaviors, we implanted into one porcine cadaveric spine different test spacers made of magnesium, titanium, and carbon-fiber-reinforced polymers (CFRP). All test spacers were scanned using two T1-TSE MRI sequences. The artifact dimensions were traced on all scans and statistically analyzed. The total artifact volume and median artifact area of the titanium spacers were statistically significantly larger than magnesium spacers (p < 0.001), while magnesium and CFRP spacers produced almost identical artifacting behaviors (p > 0.05). Our results suggest that spinal implants made with magnesium alloys will behave more like CFRP devices in MRI scans. Given its osseoconductive potential as a metal, implant alloys made with magnesium would combine the advantages to the two principal spacer materials currently used but without their limitations, at least in terms of MRI artifacting. (orig.)

  6. Effect of electrostatic charge, flow, delay and multiple actuations on the in vitro delivery of salbutamol from different small volume spacers for infants.

    Science.gov (United States)

    Wildhaber, J H; Devadason, S G; Eber, E; Hayden, M J; Everard, M L; Summers, Q A; LeSouëf, P N

    1996-10-01

    A study was undertaken to determine the influences of electrostatic charge, flow, delay, and multiple actuations on the in vitro delivery of salbutamol generated by a pressurised metered dose inhaler (pMDI) from small volume spacers used in infants. Ten actuations from a salbutamol pMDI were drawn at different flow rates after either single or multiple actuations, with or without delay, through either static or reduced static spacers. An ionic detergent was used to reduce the charge of plastic spacers (Babyhaler, Babyspacer, Aerochamber, Nebuhaler). Electrostatic charge was measured using an electrometer. A multistage liquid impinger was used to determine the particle size distribution of the output of the pMDI through the spacers. Electrostatic charge on the surface of plastic spacers had the greatest influence on delivery, causing a decrease in drug delivery. Reducing charge by coating the surface with ionic detergent resulted in an increase of 46.5-71.1% (p particle delivery from small volume plastic spacers. Lower flow, delay, and multiple actuations resulted in decreased delivery from static spacers. Lower flow resulted in a decrease of 15% in small (particle delivery. Delay and multiple actuations resulted in a decrease of 40.7% and 76.0%, respectively, in small (particle delivery. The influences of lower flow, delay, and multiple actuations were greatly reduced or even eliminated by reducing charge. However, multiple actuations still resulted in a significant decreased delivery (p coating of plastic spacers resulted in no or reduced charge and hence in improved delivery. Lower flow, delay, and multiple actuations played a major part only in static spacers.

  7. Preferential repair of ionizing radiation-induced damage in the transcribed strand of an active human gene is defective in Cockayne syndrome

    International Nuclear Information System (INIS)

    Leadon, S.A.; Copper, P.K.

    1993-01-01

    Cells from patients with Cockayne syndrome (CS), which are sensitive to killing by UV although overall damage removal appears normal, are specifically defective in repair of UV damage in actively transcribe genes. Because several CS strains display cross-sensitivity to killing by ionizing radiation, the authors examined whether ionizing radiation-induced damage in active genes is preferentially repaired by normal cells and whether the radiosensitivity of CS cells can be explained by a defect in this process. They found that ionizing radiation-induced damage was repaired more rapidly in the transcriptionally active metallothionein IIA (MTIIA) gene than in the inactive MTIIB gene or in the genome overall in normal cells as a result of faster repair on the transcribed strand of MTIIA. Cells of the radiosensitive CS strain CS1AN are completely defective in this strand-selective repair of ionizing radiation-induced damage, although their overall repair rate appears normal. CS3BE cells, which are intermediate in radiosensitivity, do exhibit more rapid repair of the transcribed strand but at a reduced rate compared to normal cells. Xeroderma pigmentosum complementation group A cells, which are hypersensitive to UV light because of a defect in the nucleotide excision repair pathway but do not show increased sensitivity to ionizing radiation, preferentially repair ionizing radiation-induced damage on the transcribed strand of MTIIA. Thus, the ability to rapidly repair ionizing radiation-induced damage in actively transcribing genes correlates with cell survival. The results extend the generality of preferential repair in active genes to include damage other than bulky lesions

  8. Distance-dependent interactions between gold nanoparticles and fluorescent molecules with DNA as tunable spacers

    International Nuclear Information System (INIS)

    Chhabra, Rahul; Sharma, Jaswinder; Lin Su; Yan Hao; Lindsay, Stuart; Liu Yan; Wang Haining; Zou Shengli

    2009-01-01

    Using stoichiometrically controlled 1:1 functionalization of gold nanoparticles with fluorescent dye molecules in which the dye molecule is held away from the particle surface by a rigid DNA spacer allows precise determination of the distance-dependent effect of the metal nanoparticles on fluorescence intensity. Two dyes were studied, Cy3 and Cy5, with two sizes of nanoparticles, 5 and 10 nm. The larger the particle, the more quenching of the photoluminescence (PL) intensity, due to increased overlap of the dye's emission spectrum with the Au surface plasmon resonance. Fluorescence is quenched significantly for distances somewhat larger than the particle diameter, in good agreement with the predictions of an electrodynamics model based on interacting dipoles. The distance dependence of surface energy transfer behavior, i.e. quenching efficiency, is proportional to 1/d 4 , which involves no consideration of the size of the particle and the spectral overlap of the dye and AuNp. This surface energy transfer model is found qualitatively and agrees with the electrodynamic model, though the exponent is greater than 4 for the smaller nanoparticles (5 nm), and smaller than 4 for the larger nanoparticles (10 nm).

  9. Distance-dependent interactions between gold nanoparticles and fluorescent molecules with DNA as tunable spacers

    Energy Technology Data Exchange (ETDEWEB)

    Chhabra, Rahul; Sharma, Jaswinder; Lin Su; Yan Hao; Lindsay, Stuart; Liu Yan [Biodesign Institute, Arizona State University, Tempe, AZ 85287 (United States); Wang Haining; Zou Shengli, E-mail: stuart.lindsay@asu.ed, E-mail: yan_liu@asu.ed [Department of Chemistry, University of Central Florida, Orlando, FL 32816 (United States)

    2009-12-02

    Using stoichiometrically controlled 1:1 functionalization of gold nanoparticles with fluorescent dye molecules in which the dye molecule is held away from the particle surface by a rigid DNA spacer allows precise determination of the distance-dependent effect of the metal nanoparticles on fluorescence intensity. Two dyes were studied, Cy3 and Cy5, with two sizes of nanoparticles, 5 and 10 nm. The larger the particle, the more quenching of the photoluminescence (PL) intensity, due to increased overlap of the dye's emission spectrum with the Au surface plasmon resonance. Fluorescence is quenched significantly for distances somewhat larger than the particle diameter, in good agreement with the predictions of an electrodynamics model based on interacting dipoles. The distance dependence of surface energy transfer behavior, i.e. quenching efficiency, is proportional to 1/d{sup 4}, which involves no consideration of the size of the particle and the spectral overlap of the dye and AuNp. This surface energy transfer model is found qualitatively and agrees with the electrodynamic model, though the exponent is greater than 4 for the smaller nanoparticles (5 nm), and smaller than 4 for the larger nanoparticles (10 nm).

  10. An impact test system design and its applications to dynamic buckling of a spacer grid assembly

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Sheng, E-mail: liusheng_05@126.com; Fan, Chenguang; Yang, Yiren

    2016-11-15

    This study is aimed at investigating the dynamic buckling load, dynamic stiffness, damping and buckling characteristics of the spacer grid assembly (SGA). A pendulum impact test system is designed to experiment the buckling of SGAs. Three criterions are discussed and compared to determine the buckling loads of SGAs: B-R criterion, energy criterion and extreme value criterion. Two approaches are applied to calculate the dynamic stiffness of SGAs: One method is natural period method based on the hypothesis of harmonic motion of the pendulum whose period is approximated because of the passivation and tailing of the impact force time history; and the other is energy method based on the conservation of mechanical energy. The equivalent viscous damping is defined as the resultant cause of dissipation and is obtained by the energy principle. The impact force time history loses its approximate symmetry after buckling occurs. The impact force and displacement reach their maxima almost at the same time at pre-buckling states but not post-buckling states. Vertical straps in SGA are found to be transversely shared by horizontal straps at the buckling position. The buckling of SGA results from the lack of strength of complete structure; and the strength of material has no effects on the buckling.

  11. Methodology development for estimating support behavior of spacer grid spring in core

    International Nuclear Information System (INIS)

    Yoon, Kyung Ho; Kang, Heung Seok; Kim, Hyung Kyu; Song, Kee Nam

    1998-04-01

    The fuel rod (FR) support behavior is changed during operation resulting from effects such as clad creep-down, spring force relaxation due to irradiation, and irradiation growth of spacer straps in accordance with time or increase of burnup. The FR support behavior is closely associated with time or increase of burnup. The FR support behavior is closely associated with FR damage due to fretting, therefore the analysis on the FR support behavior is normally required to minimize the damage. The characteristics of the parameters, which affect the FR support behavior, and the methodology developed for estimating the FR support behavior in the reactor core are described in this work. The FR support condition for the KOFA (KOrean Fuel Assembly) fuel has been analyzed by this method, and the results of the analysis show that the fuel failure due to the fuel rod fretting wear is closely related to the support behavior of FR in the core. Therefore, the present methodology for estimating the FR support condition seems to be useful for estimating the actual FR support condition. In addition, the optimization seems to be a reliable tool for establishing the optimal support condition on the basis of these results. (author). 15 refs., 3 tabs., 26 figs

  12. Cas4 Facilitates PAM-Compatible Spacer Selection during CRISPR Adaptation.

    Science.gov (United States)

    Kieper, Sebastian N; Almendros, Cristóbal; Behler, Juliane; McKenzie, Rebecca E; Nobrega, Franklin L; Haagsma, Anna C; Vink, Jochem N A; Hess, Wolfgang R; Brouns, Stan J J

    2018-03-27

    CRISPR-Cas systems adapt their immunological memory against their invaders by integrating short DNA fragments into clustered regularly interspaced short palindromic repeat (CRISPR) loci. While Cas1 and Cas2 make up the core machinery of the CRISPR integration process, various class I and II CRISPR-Cas systems encode Cas4 proteins for which the role is unknown. Here, we introduced the CRISPR adaptation genes cas1, cas2, and cas4 from the type I-D CRISPR-Cas system of Synechocystis sp. 6803 into Escherichia coli and observed that cas4 is strictly required for the selection of targets with protospacer adjacent motifs (PAMs) conferring I-D CRISPR interference in the native host Synechocystis. We propose a model in which Cas4 assists the CRISPR adaptation complex Cas1-2 by providing DNA substrates tailored for the correct PAM. Introducing functional spacers that target DNA sequences with the correct PAM is key to successful CRISPR interference, providing a better chance of surviving infection by mobile genetic elements. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

  13. A Study on Abrasive Wear Behavior of Spacer Grid Materials for Nuclear Power Plant

    International Nuclear Information System (INIS)

    Park, J. M.; Kim, J. H.; Park, J. K.; Jeon, K. L.

    2010-01-01

    Spacer grid is one of the key components of a light water reactor (LWR) fuel assembly. The most important function of it is to hold the fuel rods to maintain the distance between the fuel rods inside a fuel assembly. At the reactor core in operating power plants, a fretting damage has been frequently reported between a nuclear fuel rod and its supporting spring/dimple of the fuel assemblies. This is due to a flow induced vibration (FIV), Which results from the primary coolant that rapidly passes around the fuel rod to remove the excess heat generated by the nuclear reaction. Fretting damage is generally caused by fretting wear, which includes various wear mechanisms such as an oxidative, adhesive, abrasive wear, etc., or fretting fatigue, which includes a surface or bulk fatigue. The purpose of the present work are to investigate the variation of the materials with increasing number of cycles and sliding velocity under abrasive wear test and to examine the wear mechanism at each test condition

  14. Ribosomal intergenic spacer analysis as a tool for monitoring methanogenic Archaea changes in an anaerobic digester.

    Science.gov (United States)

    Ciesielski, Slawomir; Bułkowska, Katarzyna; Dabrowska, Dorota; Kaczmarczyk, Dariusz; Kowal, Przemyslaw; Możejko, Justyna

    2013-08-01

    The applicability of a newly-designed PCR primer pair in examination of methanogenic Archaea in a digester treating plant biomass was evaluated by Ribosmal Intergenic Spacer Analysis (RISA). To find a suitable approach, three variants of RISA were tested: (1) standard, polyacrylamide gel-based, (2) automated, utilized capillary electrophoresis (GA-ARISA), and (3) automated microfluidics-based (MF-ARISA). All three techniques yielded a consistent picture of archaeal community structure changes during anaerobic digestion monitored for more than 6 weeks. While automated variants were more practical for handling and rapid analysis of methanogenic Archaea, the gel-based technique was advantageous when micro-organism identification was required. A DNA-sequence analysis of dominant bands extracted from the gel revealed that the main role in methane synthesis was played by micro-organisms affiliated with Methanosarcina barkeri. The obtained results revealed that RISA is a robust method allowing for detailed analysis of archaeal community structure during organic biomass conversion into biogas. In addition, our results showed that GA-ARISA has a higher resolution and reproducibility than other variants of RISA and could be used as a technique for tracking changes in methanogenic Archaea in an anaerobic digester.

  15. Experimental study on local resistance of two-phase flow through spacer grid with rod bundle

    International Nuclear Information System (INIS)

    Yan Chaoxing; Yan Changqi; Sun Licheng; Tian Qiwei

    2015-01-01

    The experimental study on local resistance of single-phase and two-phase flows through a spacer grid in a vertical channel with 3 × 3 rod bundle was carried out under the normal temperature and pressure. For the case of single-phase flow, the liquid Reynolds number covered the range of 290-18 007. For the case of two-phase flow, the ranges of gas and liquid superficial velocities were 0.013-3.763 m/s and 0.076-1.792 m/s, respectively. A correlation for predicting local resistance of single-phase flow was given based on experimental results. Eight classical two-phase viscosity formulae for homogeneous model were evaluated against the experimental data of two-phase flow. The results show that Dukler model predicts the experimental data well in the range of Re 1 < 9000 while McAdams correlation is the best one for Re 1 ≥ 9000. For all experimental data, Dukler model provides the best prediction with the mean relative error of 29.03%. A new correlation is fitted for the range of Re 1 < 9000 by considering mass quality, two- phase Reynolds number and liquid and gas densities, resulting in a good agreement with the experimental data. (authors)

  16. Effect of PEG biofunctional spacers and TAT peptide on dsRNA loading on gold nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Sanz, Vanesa; Conde, Joao; Hernandez, Yulan [Universidad de Zaragoza, Instituto de Nanociencia de Aragon (Spain); Baptista, Pedro V. [Universidade Nova de Lisboa, Departamento de Ciencias da Vida, Faculdade de Ciencias e Tecnologia, Centro de Investigacao em Genetica Molecular Humana (Portugal); Ibarra, M. R.; Fuente, Jesus M. de la, E-mail: jmfuente@unizar.es [Universidad de Zaragoza, Instituto de Nanociencia de Aragon (Spain)

    2012-06-15

    The surface chemistry of gold nanoparticles (AuNPs) plays a critical role in the self-assembly of thiolated molecules and in retaining the biological function of the conjugated biomolecules. According to the well-established gold-thiol interaction the undefined ionic species on citrate-reduced gold nanoparticle surface can be replaced with a self-assembled monolayer of certain thiolate derivatives and other biomolecules. Understanding the effect of such derivatives in the functionalization of several types of biomolecules, such as PEGs, peptides or nucleic acids, has become a significant challenge. Here, an approach to attach specific biomolecules to the AuNPs ({approx}14 nm) surface is presented together with a study of their effect in the functionalization with other specific derivatives. The effect of biofunctional spacers such as thiolated poly(ethylene glycol) (PEG) chains and a positive peptide, TAT, in dsRNA loading on AuNPs is reported. Based on the obtained data, we hypothesize that loading of oligonucleotides onto the AuNP surface may be controlled by ionic and weak interactions positioning the entry of the oligo through the PEG layer. We demonstrate that there is a synergistic effect of the TAT peptide and PEG chains with specific functional groups on the enhancement of dsRNA loading onto AuNPs.

  17. Acute toxicity after a diverting stoma and spacer prior to chemoradiation in locally advanced rectal cancer

    International Nuclear Information System (INIS)

    Voort van Zyp, Jochem R.N. van der; Ceha, Heleen M.; Niehe, Valerie; Marinelli, Andreas W.K.S.; Putter, Hein; Marijnen, Corrie A.M.

    2015-01-01

    Background and purpose: Chemoradiotherapy (CRT) followed by surgery is the standard of care for locally advanced rectal cancer (LARC). For grade ⩾3 acute diarrhea there is a relationship between dose and irradiated small bowel volume. The aim of this study was to evaluate whether combined placement of a diverting stoma and sigmoid spacer (DSSS) led to reduced irradiated small bowel volume and less grade ⩾3 acute diarrhea in the treatment of LARC. Materials/methods: Between 2003 and 2010, 54 of 189 LARC patients treated with CRT in two institutions had a DSSS prior to CRT. Data on patient and treatment characteristics and outcomes were collected retrospectively. Delineation of small bowel was performed with planning CT-scans. CTCAE version 4.0 was used for acute toxicity. Results: Patients with a DSSS had significantly less small bowel volume irradiated up to doses of 20 Gy. This difference was not observed for the higher dose levels. CRT induced grade ⩾3 acute diarrhea was not different between the two groups (8.3% vs. 12.8%; p = 0.41). Conclusion: DSSS is not clearly beneficial to reduce grade ⩾3 acute diarrhea, and it must be considered whether placement of a DSSS is justified for this purpose

  18. Adsorption chromatography to purify Spacer disaccharide of Active Pharmaceutical Ingredient of QuimiHib vaccine

    International Nuclear Information System (INIS)

    Diaz, Belinda; Heynngnezz, Lazaro; Beldarrain, Alejandro

    2013-01-01

    In this paper we study the conditions of adsorption chromatography on Silica gel 60 for purification of Spacer disaccharide a component of Active Pharmaceutical Ingredient (API) of QuimiHib vaccine. For that, we made a scale down on an analytical scale that represented at 1.8% of industrial process, indicating reproducibility between two procedures in terms of packing efficiency, purity and recovery. Dynamic binding capacity of the resin Silicagel 60 by the DSE was roughly 125±0.2 mg /mL, 3.4 times the base process. The elution profile obtained, showed the possibility of collecting a unique fraction at range 195±2 and 260±2 minutes, if it is maintained a proper packing of the chromatography resin determined by asymmetry factor from 0.8 to 1.2, which ensures a recovery of 58.9±4.5% and high purity analyzed by Thin Layer Chromatography. Adjusting the adsorption conditions increases the productivity of chromatographic operation up to 3.5 fold, indicating that it is feasible in economic terms

  19. Influence of the spacer layer on microstructure and magnetic properties of [NdFeB/(NbCu)]xn thin films

    Energy Technology Data Exchange (ETDEWEB)

    Chiriac, H. [National Institute of R and D for Technical Physics, 47 Mangeron Blvd., 700050 Iasi (Romania); Grigoras, M. [National Institute of R and D for Technical Physics, 47 Mangeron Blvd., 700050 Iasi (Romania); Urse, M. [National Institute of R and D for Technical Physics, 47 Mangeron Blvd., 700050 Iasi (Romania)]. E-mail: urse@phys-iasi.ro

    2007-09-15

    Some results concerning the influence of the composition and thickness of NbCu spacer layer on the microstructure and magnetic properties of multilayer [NdFeB/(NbCu)]xn films, in view of their utilization for manufacturing the thin film permanent magnets are presented. A comparison between the microstructure and magnetic properties of NdFeB single layer and [NdFeB/(NbCu)]xn multilayer is also presented. The multilayer [NdFeB/(NbCu)]xn thin films with the thickness of the NdFeB layer of 180nm and the thickness of the NbCu spacer layer of 3nm, exhibit good hard magnetic characteristics such as coercive force H{sub c} of about 1510kA/m and the remanence ratio M{sub r}/M{sub s} of about 0.8.

  20. Influence of the spacer layer on microstructure and magnetic properties of [NdFeB/(NbCu)]xn thin films

    International Nuclear Information System (INIS)

    Chiriac, H.; Grigoras, M.; Urse, M.

    2007-01-01

    Some results concerning the influence of the composition and thickness of NbCu spacer layer on the microstructure and magnetic properties of multilayer [NdFeB/(NbCu)]xn films, in view of their utilization for manufacturing the thin film permanent magnets are presented. A comparison between the microstructure and magnetic properties of NdFeB single layer and [NdFeB/(NbCu)]xn multilayer is also presented. The multilayer [NdFeB/(NbCu)]xn thin films with the thickness of the NdFeB layer of 180nm and the thickness of the NbCu spacer layer of 3nm, exhibit good hard magnetic characteristics such as coercive force H c of about 1510kA/m and the remanence ratio M r /M s of about 0.8