WorldWideScience

Sample records for internal irradiation site

  1. Mathematical models in Slowpoke reactor internal irradiation site

    International Nuclear Information System (INIS)

    Raza, J.

    2007-01-01

    The main objective is to build representative mathematical models of neutron activation analysis in a Slowpoke internal irradiation site. Another significant objective is to correct various elements neutron activation analysis measured mass using these models. The neutron flux perturbation is responsible for the measured under-estimation of real masses. We supposed that neutron flux perturbation measurements taken during the Ecole Polytechnique de Montreal Slowpoke reactor first fuel loading were still valid after the second fuelling. .We also supposed that the thermal neutrons spatial and kinetic energies distributions as well as the absorption microscopic cross section dependence on the neutrons kinetic energies were important factors to satisfactorily represent neutron activation analysis results. In addition, we assumed that the neutron flux is isotropic in the laboratory system. We used experimental results from the Slowpoke reactor internal irradiation sites, in order to validate our mathematical models. Our models results are in close agreement with these experimental results..We established an accurate global mathematical correlation of the neutron flux perturbation in function of samples volumes and macroscopic neutron absorption cross sections. It is applicable to sample volumes ranging from 0,1 to 1,3 ml and macroscopic neutron absorption cross section up to 5 moles-b for seven (7) elements with atomic numbers (Z) ranging from 5 to 79. We first came up with a heuristic neutron transport mathematical semi-analytical model, in order to better understand neutrons behaviour in presence of one of several different nuclei samples volumes and mass. In order to well represent the neutron flux perturbation, we combined a neutron transport solution obtained from the spherical harmonics method of a finite cylinder and a mathematical expression combining two cylindrical harmonic functions..With the help of this model and the least squares method, we made extensive

  2. International document on food irradiation

    International Nuclear Information System (INIS)

    1990-06-01

    This international document highlights the major issues related to the acceptance of irradiated food by consumers, governmental and intergovernmental activities, the control of the process, and trade. The conference recognized that: Food irradiation has the potential to reduce the incidence of foodborne diseases. It can reduce post-harvest food losses and make available a larger quantity and a wider variety of foodstuffs for consumers. Regulatory control by competent authorities is a necessary prerequisite for introduction of the process. International trade in irradiated foods would be facilitated by harmonization of national procedures based on internationally recognized standards for the control of food irradiation. Acceptance of irradiated food by the consumer is a vital factor in the successful commercialization of the irradiation process, and information dissemination can contribute to this acceptance

  3. Prospects of international trade in irradiated foods

    International Nuclear Information System (INIS)

    Loaharanu, P.

    1990-01-01

    Irradiation is gaining recognition as a physical process for reducing food losses, enhancing hygienic quality of food and facilitating food trade. At present, 36 countries have approved the use of irradiation for processing collectively over 40 food items either on an unconditional or restricted basis. Commercial use of irradiated foods and food ingredients is being carried out in 22 countries. Technology transfer on food irradiation is being intensified to local industry in different regions. Worldwide, a total of 40 commercial/demonstration irradiators available for treating foods have been or are being constructed. Acceptance and control of international trade in irradiated foods were discussed at the International Conference on the Acceptance, Control of and Trade in Irradiated Food, jointly convened by FAO, IAEA, WHO and ITC-UNCTAD/GATT in Geneva, Switzerland, 12-16 December 1988. An ''International Document on Food Irradiation'' was adopted by consensus at this Conference which will facilitate wider acceptance and control of international trade in irradiated foods. (author)

  4. International standards, Agreements and Policy of food Irradiation

    International Nuclear Information System (INIS)

    Roberts, P.B.

    1997-01-01

    There are few internationally recognised standards and agreements related to irradiated foods. Codex Alimentarius has its General standard for Irradiated foods. This sets standards for the production of irradiated foods that are safe and nutritionally adequate. Guidelines for the proper processing of foods by irradiation are covered in the Codex Recommended International Code of Practice for the Operation of Radiation Facilities Used for the Treatment of Food. For irradiation as a quarantine treatment for fruit, vegetables and other plants, the relevant international organization is the International Plant Protection Convention (IPPC), IPPC has no standards or guidelines for irradiation treatments. However, regional organizations within IPPC are moving towards recognition of irradiation as a technically viable and effective method of insect disinfestation. Especially notable are actions within the North American Plant Protection Organisation (NAPPO). NAPPO has endorsed a standard on the use of irradiation as a quarantine treatment. Other speakers have provided considerable detail on the Codex standard and on the situation with regard to quarantine issues. In this talk I will concentrate on irradiated foods as commodities that will be traded internationally in increasing amounts as we approach the next century. International trade is governed by bilateral arrangements. However, these arrangements should be consistent with the overarching multilateral agreements of the World trade Organization (WTO). The WTO Agreements do not refer directly to irradiation or irradiated foods. However, in this talk I will try to interpret the implications of the Agreements for trade in irradiated food. (Author)

  5. International standards, Agreements and Policy of food Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, P.B. [Industrial and Biological Section. Institute of Geological and Nuclear Science. P.O. Box 31. Lower Hutt (New Zealand)

    1997-12-31

    There are few internationally recognised standards and agreements related to irradiated foods. Codex Alimentarius has its General standard for Irradiated foods. This sets standards for the production of irradiated foods that are safe and nutritionally adequate. Guidelines for the proper processing of foods by irradiation are covered in the Codex Recommended International Code of Practice for the Operation of Radiation Facilities Used for the Treatment of Food. For irradiation as a quarantine treatment for fruit, vegetables and other plants, the relevant international organization is the International Plant Protection Convention (IPPC), IPPC has no standards or guidelines for irradiation treatments. However, regional organizations within IPPC are moving towards recognition of irradiation as a technically viable and effective method of insect disinfestation. Especially notable are actions within the North American Plant Protection Organisation (NAPPO). NAPPO has endorsed a standard on the use of irradiation as a quarantine treatment. Other speakers have provided considerable detail on the Codex standard and on the situation with regard to quarantine issues. In this talk I will concentrate on irradiated foods as commodities that will be traded internationally in increasing amounts as we approach the next century. International trade is governed by bilateral arrangements. However, these arrangements should be consistent with the overarching multilateral agreements of the World trade Organization (WTO). The WTO Agreements do not refer directly to irradiation or irradiated foods. However, in this talk I will try to interpret the implications of the Agreements for trade in irradiated food. (Author)

  6. International status of food irradiation

    International Nuclear Information System (INIS)

    Diehl, J.F.

    1983-01-01

    Radiation processing of foods has been studied for over 30 years. To a considerable extent this research was carried out in the framework of various international projects. After optimistic beginnings in the 1950s and long delays, caused by uncertainty about the health safety of foods so treated, food irradiation has now reached the stage of practical application in several countries. In order to prepare the way for world-wide accceptance of the new process, the Codex Alimentarius Commission has accepted an 'International General Standard for Irradiated Foods' and an 'International Code of Practice for the Operation of Irradiation Facilities Used for the Treatment of Foods'. Psychological barriers to a process associated with the word 'radiation' are still formidable; it appears, however, that acceptance by authorities, food industry and consumers continues to grow

  7. International acceptance of irradiated food. Legal aspects

    International Nuclear Information System (INIS)

    1979-01-01

    The three international organizations competent in the field of irradiation processing for the preservation of food (FAO, WHO, IAEA), convened, at the end of 1977, an Advisory Group to revise and update the recommendations of a similar group which met in early 1972. The Advisory Group considered how national regulations could be harmonized so as to facilitate the international movement of irradiated food. This publication contains the Report of the Advisory Group, which summarizes the considerations of the Group on regulatory control over the irradiation plant and irradiation of foods, and on assurances for comparability of control (international labelling and documentation). Annexes 1 to 6 are included in order to complete the relevant information on the legal aspects of this subject. They include a Draft General Standard for Irradiated Foods, a Draft Code of Practice for the Operation of Radiation Facilities Used for the Treatment of Foods, Recommendations of a Consultation Group on the Legal Aspects of Food Irradiation, a Listing of the Legislation on Food Irradiation Adopted in Member States (1971-1976), and Model Regulations for the Control of and Trade in Irradiated Food

  8. The effect of cadmium shielding on the spatial neutron flux distribution inside one of the outer irradiation sites

    International Nuclear Information System (INIS)

    Shaaban, I.

    2009-06-01

    A permanent epithermal neutron irradiation facility was designed in the Syrian Miniature Neutron Source Reactor (MNSR) by using the cadmium (cylindrical vial 1.0 mm in thickness, 38.50 mm in diameter and 180 mm in length) as thermal neutron shielding material, for a permanent epithermal neutron activation analysis (ENAA). This site was designed by shielding the internal surface of the aluminum tube of the first outer irradiation site in the MNSR reactor. I was used the activation detectors 0.1143% Au-Al alloy foils with 0.1 mm thickness and 2.0 mm diameter for measurement the thermal neutron flux, epithermal and R c d=A b are/A c over ratio in the outer irradiation site. Distribution of the thermal neutron flux in the outer irradiation capsule has been found numerically using MCNP-4C code with and without cadmium shield, and experimentally by irradiating five copper wires using the outer irradiation capsule. Good agreements were obtained between the calculated and the measured results. (author)

  9. Internal irradiation for cystic craniopharyngioma

    International Nuclear Information System (INIS)

    Kobayashi, T.; Kageyama, N.; Ohara, K.

    1981-01-01

    The authors report the results of internal irradiation with labeled chromic phosphate (32P) and gold-198 (198Au) colloid in eight cases of cystic craniopharyngiomas. They used a newly developed dosimetric formula, by which the radiation dose at the cyst wall and at any point far from the radioactive source can be calculated. Ten courses of irradiation in eight patients were carried out by injection of either 32P or 198Au colloid into the cyst through an Ommaya drainage system that had been placed at craniotomy. Follow-up studies ranging from 13 to 156 months revealed that all cysts were effectively treated, with elimination of fluid or collapse of the cyst. This was confirmed by Conray cystography and/or computerized tomography. Not only the dose delivered to the wall but also the thickness of the cyst wall and the location of the cyst are important factors in planning internal irradiation. A safe and adequate dose to the cyst wall could range between 9000 to 30,000 rads for craniopharyngioma. This treatment is suitable for large cysts that are thought to be difficult to remove radically, recurrent cysts resistant to previous treatment, or multiple cysts. Internal irradiation may also be applicable in other cystic intracranial tumors if dosimetry is calculated accurately

  10. International Developments of Food Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Loaharanu, P. [Head, Food Preservation Section, Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

    1997-12-31

    Food irradiation is increasingly accepted and applied in many countries in the past decade. Through its use, food losses and food-borne diseases can be reduced significantly, and wider trade in many food items can be facilitated. The past five decades have witnessed a positive evolution on food irradiation according to the following: 1940`s: discovery of principles of food irradiation; 1950`s: initiation of research in advanced countries; 1960`s: research and development were intensified in some advanced and developing countries; 1970`s: proof of wholesomeness of irradiated foods; 1980`s: establishment of national regulations; 1990`s: commercialization and international trade. (Author)

  11. International Developments of Food Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Loaharanu, P [Head, Food Preservation Section, Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

    1998-12-31

    Food irradiation is increasingly accepted and applied in many countries in the past decade. Through its use, food losses and food-borne diseases can be reduced significantly, and wider trade in many food items can be facilitated. The past five decades have witnessed a positive evolution on food irradiation according to the following: 1940`s: discovery of principles of food irradiation; 1950`s: initiation of research in advanced countries; 1960`s: research and development were intensified in some advanced and developing countries; 1970`s: proof of wholesomeness of irradiated foods; 1980`s: establishment of national regulations; 1990`s: commercialization and international trade. (Author)

  12. International Developments of Food Irradiation

    International Nuclear Information System (INIS)

    Loaharanu, P.

    1997-01-01

    Food irradiation is increasingly accepted and applied in many countries in the past decade. Through its use, food losses and food-borne diseases can be reduced significantly, and wider trade in many food items can be facilitated. The past five decades have witnessed a positive evolution on food irradiation according to the following: 1940's: discovery of principles of food irradiation; 1950's: initiation of research in advanced countries; 1960's: research and development were intensified in some advanced and developing countries; 1970's: proof of wholesomeness of irradiated foods; 1980's: establishment of national regulations; 1990's: commercialization and international trade. (Author)

  13. Internal irradiation for cystic craniopharyngioma

    International Nuclear Information System (INIS)

    Kobayashi, Tatsuya; Kageyama, Naoki

    1979-01-01

    Internal irradiation with P-32 chromic phosphate and Au-198 colloid was used to treat cystic craniopharyngioma. A newly developed dosimetric formula, by which the radiation dose can be calculated simultaneously at the cyst wall and at a point far from the radioactive source and the untoward effect of irradiation on surrounding brain tissue can be eliminated, especially in cases in which the wall is thin and can be penetrated by beta emission, was used. Radioactive phosphate or gold was injected into eight craniopharyngioma cysts throught the Ommaya reservoir and a tube inserted at the first craniotomy. All cysts were effectively treated for 3 to 33 months, to eliminate fluid retention or collapse. A collapsed cyst was removed at the second craniotomy and irradiation was histologically shown to be effective. Oculomotor palsy, a side effect of irradiation, occurred 10 days after the injection of 5 mc of P-32 chromic phosphate only in a case of small cysts (5.0 ml) in the supra- and intracellular regions. The thickness of the cyst wall was less than 0.5 mm and the oculomotor nerves were thought to adhere to the wall. Not only the amount of wall dose but also the thickness of the wall and localization of the cyst are important factors in internal irradiation. Sufficient and safer doses which kill tumor cells in the wall and have no side effects, are 9,000 to 30,000 rad. Internal irradiation can be used to treat large cysts of more than 10 ml which are supposedly difficult to remove radically and or multiple cysts. It is effective not only for cystic craniopharyngioma but also for intracrania cystic tumors other than craniopharyngioma, if dosimetry is accurate. (J.P.N.)

  14. New pallet irradiator for Gammaster International

    International Nuclear Information System (INIS)

    Moehlmann, J.H.F.

    1993-01-01

    State of the art technology offers many opportunities to improve production processes with ionizing radiation. Internal and external audits, in particular by regulatory bodies such as the FDA and DHSS/MCA, are necessary and commonplace requirements when operating in the healthcare and pharmaceutical sectors. Efficiency is a major requirement for industry and also for our radiation business. With all the above mentioned items in mind, Gammaster International B.V. has developed and built a new type Pallet Irradiator. For this irradiator Gammaster International designed and built a new process console, incorporating state of the art technology. (author)

  15. Wholesomeness studies in the International Food Irradiation Project

    Energy Technology Data Exchange (ETDEWEB)

    Elias, P S [International Food Irradiation Project, Federal Research Centre for Nutrition

    1980-01-01

    Despite more than 25 years of history as an effective food preservation method, food irradiation is still subject to strict legislative control in many countries and scientific investigations are required to provide reassurance as to the safety of irradiated food. The International Food Irradiation Project was set up on October 14, 1970 to facilitate the objective evaluation of the wholesomeness of irradiated foodstuffs. Its major activities are; (1) wholesomeness testing of irradiated foods, (2) research on and investigations into the methodology of wholesomeness testing, (3) dissemination of information, and (4) assisting national and international authorities in their consideration of acceptance of irradiated food. In particular, the project over the past nine years had been devoted to the provision of data to national health authorities and international bodies. Up to now, 23 studies were and are being carried out for the project under contract. Subjects for the studies include wheat, wheat flour, potatoes, fish, rice, mango, spices, dried dates, onions and cocoa beans.

  16. Wholesomeness studies in the International Food Irradiation Project

    International Nuclear Information System (INIS)

    Elias, P.S.

    1980-01-01

    Despite more than 25 years history as an effective food preservation method, food irradiation is still subject to strict legislative control in many countries and it is required to carry out scientific investigations to reassure the safety of irradiated food. The International Food Irradiation Project was set up on October 14, 1970 to facilitate the objective evaluation of the wholesomeness of irradiated foodstuffs. Its major activities are; (1) wholesomeness testing of irradiated foods, (2) research on and investigations into the methodology of wholesomeness testing, (3) dissemination of information, and (4) assisting national and international authorities in their consideration of acceptance of irradiated food. In particular, the project over the past nine years had been devoted to the provision of data to national health authorities and international bodies. Up to now, 23 studies were and are being carried out for the project under contract. Subject to the studies include wheat, wheat flour, potatoes, fish, rice, mango, spices, dried dates, onions and cocoa beans. (Kitajima, A.)

  17. Internal friction in irradiated textolite

    International Nuclear Information System (INIS)

    Zajkin, Yu.A.; Kozhamkulov, B.A.; Koztaeva, U.P.

    1996-01-01

    Structural relaxation in irradiated textolite of ST and ST-EhTF trade marks presenting pressed material got by method of impregnation of fibreglass by phenole and epoxytriphenole binders relatively. Measuring of temperature dependences of internal friction (TDIF) is carried out in torsional pendulum at oscillation frequency 0.6-1.0 Hz before and after irradiation by stopped gamma-quanta with energy 3 MeV on electron accelerator EhLU-4. α and β peaks, related with segments motion in base and side chains of macromolecular have being observed on TDIF of all textolite. Growth of peaks height after irradiation evident about increase of segments mobility in base chain and about de-freezing of segments in side chains and it could be considered as qualitative measure of radiation destruction rate. Comparison of temperature dependences of internal friction indicates on higher radiation stability of textolite of ST-EhTF trade mark

  18. International status of food irradiation

    International Nuclear Information System (INIS)

    Roberts, P.B.

    1982-09-01

    Recent international moves that are likely to result in an increasing acceptance of irradiated foods are reviewed. Particular attention is given to the activities of the FAO, WHO, Codex Alimentarius and to attitudes in the United States and the Asian-Pacific region. In 1979, the Codex Alimentarius Commission adopted a Recommended General Standard for Irradiated Food. A resume is given of a revised version of the standard that is presently under consideration. However, remaining barriers to trade in irradiated food are briefly discussed, such as legal and regulatory problems, labelling, public acceptance and economic viability

  19. Food irradiation receives international acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Beddoes, J M [Atomic Energy of Canada Ltd., Ottawa, Ontario. Commercial Products

    1982-04-01

    Irradiation has advantages as a method of preserving food, especially in the Third World. The author tabulates some examples of actual use of food irradiation with dates and tonnages, and tells the story of the gradual acceptance of food irradiation by the World Health Organization, other international bodies, and the U.S. Food and Drug Administration (USFDA). At present, the joint IAEA/FAO/WHO standard permits an energy level of up to 5 MeV for gamma rays, well above the 1.3 MeV energy level of /sup 60/Co. The USFDA permits irradiation of any food up to 10 krad, and minor constituents of a diet may be irradiated up to 5 Mrad. The final hurdle to be cleared, that of economic acceptance, depends on convincing the food processing industry that the process is technically and economically efficient.

  20. New pallet irradiation for Gammaster International

    Science.gov (United States)

    Möhlmann, Mr. J. H. F.

    1993-07-01

    State of the art technology offers many opportunities to improve production process with ionizing radiation. Also the requirements to this process become more and more stringent; who was aware of the ISO-9000 Standards? Now it is a necessary concept? Internal and external audits, in particular by Regulatory Bodies such as the FDA and DHSS/MCA, are necessary and commonplace requirements when operating in the Healthcare and Pharmaceutical sectors. Efficiency is a major requirement for industry and also for our radiation business. With all the above mentioned items in mind, Gammaster International B.V. in close cooperation with Nordion International Inc. has developed and built a new type Pallet Irradiator. In this new concept, our 22 years experience in gamma processing and the expertise gained in 10 years of operation of pallet irradiators was incorporated. For this irradiator Gammaster International designed and built a new process control console, incorporating state of the art technology such as: - A well-balanced safety system - A control panel, with status indication for all essential operating and safety parameters - Advances warning for necessary maintenance work - Automatic timer-setting control in addition to an automatic timer setting modification - Clear indication of the position of the product inside the unit and its status - Fully automatic product information generated when the product leaves the irradiation unit - Visual process control with the help of a color monitor - Incremental dose-control - Fault identification

  1. Radioresistance and immunization effectiveness under internal irradiation

    International Nuclear Information System (INIS)

    Kal'nitskij, S.A.

    1978-01-01

    The effect of preliminary immunization on the radioresistance of mice to internal irradiation from incorporated 137 Cs or 90 Sr was studied, and it was found that a preliminary single immunization with bacterial vaccines had a favorable effect on the outcome of radiation injury. The present results suggested that vaccination had a very pronounced radioprotective effect and so may be used as a means of biologic protection from internal irradiation

  2. International standards and agreements in food irradiation

    International Nuclear Information System (INIS)

    Cetinkaya, N.

    2004-01-01

    The economies of both developed and developing countries have been effected by their exported food and agricultural products. Trading policies of food and agricultural products are governed by international agreement as well as national regulations. Trade in food and agricultural commodities may be affected by both principal Agreements within the overall World Trade Organization (WTO) Agreement, though neither specifically refers to irradiation or irradiated foods. The principal Agreements are the Technical Barriers to Trade (TBT) Agreement and the Sanitary and Phyto sanitary (SPS) Agreement. The SPS of the WTO requires governments to harmonize their sanitary and phyto sanitary measures on as wide basis as possible. Related standards, guidelines and recommendations of international standard setting bodies such as the Codex Alimentarius Commission (food safety); the International Plant Protection Convention (IPPC) (plant health and quarantine); and International Office of Epizootic (animal health and zoo noses) should be used in such a harmonization. International Standards for Phyto sanitary Measures (ISPM) no.18 was published under the IPPC by FAO (April 2003, Rome-Italy). ISPM standard provides technical guidance on the specific procedure for the application of ionizing radiation as a phyto sanitary treatment for regulated pests or articles. Moreover, Codex Alimentarius Commission, Codex General Standard for Irradiated Foods (Stand 106-1983) and Recommended International Code of Practice were first published in 1983 and revised in March 2003. Scope of this standard applies to foods processed by ionizing radiation that is used in conjunction with applicable hygienic codes, food standards and transportation codes. It does not apply to foods exposed to doses imparted by measuring instruments used for inspection purposes. Codex documents on Principles and Guidelines for the Import/Export Inspection and Certification of Foods have been prepared to guide international

  3. Reactivity-flooding effect of the MNSR inner irradiation sites

    International Nuclear Information System (INIS)

    Khamis, I.; Khattab, K.

    1999-01-01

    For the purpose of safety assessments, evaluation of the reactivity effects of inner irradiation sites, being flooded with water in the MNSR reactor was conducted both numerically and experimentally. Measured and calculated effect of different combination of inner irradiation sites being flooded with water was evaluated numerically and experimentally. Good agreement between measurement and calculated results were obtained

  4. International Facility for Food Irradiation Technology

    International Nuclear Information System (INIS)

    Farkas, J.

    1982-01-01

    The International Facility for Food Irradiation Technology (IFFIT) was set up in November 1978 for a period of five years at the Pilot Plant for Food Irradiation, Wageningen, The Netherlands under an Agreement between the FAO, IAEA and the Ministry of Agriculture and Fisheries of the Government of the Netherlands. Under this Agreement, the irradiation facilities, office space and services of the Pilot Plant for Food Irradiation are put at IFFIT's disposal. Also the closely located Research Foundation, ITAL, provides certain facilities and laboratory services within the terms of the Agreement. The FAO and IAEA contribute US-Dollar 25,000. Annually for the duration of IFFIT. (orig.) [de

  5. Food irradiation receives international acceptance

    International Nuclear Information System (INIS)

    Beddoes, J.M.

    1982-01-01

    Irradition has advantages as a method of preserving food, especially in the Third World. The author tabulates some examples of actual use of food irradiation with dates and tonnages, and tells the story of the gradual acceptance of food irradiation by the World Health Organization, other international bodies, and the U.S. Food and Drug Administration (USFDA). At present, the joint IAEA/FAO/WHO standard permits an energy level of up to 5 MeV for gamma rays, well above the 1.3 MeV energy level of 60 Co. The USFDA permits irradiation of any food up to 10 krad, and minor constituents of a diet may be irradiated up to 5 Mrad. The final hurdle to be cleared, that of economic acceptance, depends on convincing the food processing industry that the process is technically and economically efficient

  6. Legal aspects and international implications of food irradiation

    International Nuclear Information System (INIS)

    Gerard, Alain.

    1977-11-01

    This paper reports on the status of work on food irradiation at international level, namely the IAEA/FAO/WHO Vienna recommendations, the proposed EEC directive, and the Codex alimentarius draft standards. It then deals with the legal aspects of the subject, in particular the problems concerning definitions, controls and instructions, and finally reviews the regulations for international trade in irradiated foodstuffs. (NEA) [fr

  7. International standards and agreements in food irradiation

    International Nuclear Information System (INIS)

    Cetinkaya, N.

    2004-01-01

    Full text: The economies of both developed and developing countries have been effected by their exported food and agricultural products. Trading policies of food and agricultural products are governed by international agreement as well as national regulations. Trade in food and agricultural commodities may be affected by both principal Agreements within the overall World Trade Organization (WTO) Agreement, though neither specifically refers to irradiation or irradiated foods. The principal Agreements are the Technical Barriers to Trade (TBT) Agreement and the Sanitary and Phyto sanitary (SPS) Agreement. The SPS of the WTO requires governments to harmonize their sanitary and phyto sanitary measures on as wide basis as possible. Related standards, guidelines and recommendations of international standard setting bodies such as the Codex Alimentarius Commission (food safety); the International Plant Protection Convention (IPPC) (plant health and quarantine); and International Office of Epizootic (animal health and zoo noses) should be used in such a harmonization. International Standards for Phyto sanitary Measures (ISPM) no.18 was published under the IPPC by FAO (April 2003, Rome-Italy). ISPM standard provides technical guidance on the specific procedure for the application of ionizing radiation as a phyto sanitary treatment for regulated pests or articles. Moreover, Codex Alimentarius Commission, Codex General Standard for Irradiated Foods (Stand 106-1983) and Recommended International Code of Practice were first published in 1983 and revised in March 2003. Scope of this standard applies to foods processed by ionizing radiation that is used in conjunction with applicable hygienic codes, food standards and transportation codes. It does not apply to foods exposed to doses imparted by measuring instruments used for inspection purposes. Codex documents on Principles and Guidelines for the Import/Export Inspection and Certification of Foods have been prepared to guide

  8. DNA damage induced by radionuclide internal irradiation

    International Nuclear Information System (INIS)

    Cui Fengmei; Zhao Jingyong; Hong Chengjiao; Lao Qinhua; Wang Liuyi; Yang Shuqin

    2004-01-01

    Objective: To study the DNA damage of peripheral blood mononuclear cell (PBMC) in rats exposed to radionuclide internal irradiation. Methods: The radionuclides were injected into the rats and single cell get electrophoresis (SCGE) was performed to detect the length of DNA migration in the rat PBMC. Results: DNA migration in the rat PBMC increased with accumulative dose or dose-rate. It showed good relationship of dose vs. response and of dose-rate vs. response, both relationship could be described as linear models. Conclusion: Radionuclide internal irradiation could cause DNA damage in rat PBMC. (authors)

  9. Two cases of fibrosarcoma occurring in the x-ray irradiated site

    International Nuclear Information System (INIS)

    Wakamatsu, Katsuo; Mochizuki, Masako.

    1975-01-01

    The histological examination was carried out on the following 2 cases: One case was a 46-year-old man with psoriasis vulgaris who received x-ray irradiation continually for about 10 years on the gluteal regions and the extensive sides of both elbows. An ulcer appeared on the irradiated site and about 2 weeks later a tumor appeared. The other case was a 77-year-old man with prurigo in the pudendal region. Although the dose and duration of irradiation are unknown, the tumors appeared in the irradiated site 6-7 years after the start of irradiation. The histological examination of these cases revealed the clinical findings of fibrosarcoma. In the review of literature, 8 cases of irradiation sarcoma in Japan were discussed. (Kanao, N.)

  10. International Cooperation to Establish Standard Operating Procedure (SOP) for Quarantine Management of Irradiated Foods in International Trade

    International Nuclear Information System (INIS)

    Lee, J. W.; Byun, M. W.; Kim, J. H.; Choi, J. I.; Song, B. S.; Yoon, Y. H.; Kim, D. H.; Kim, W. G.; Kim, K. P.

    2010-02-01

    · Development of SOPs through various research activities such as building international cooperation, and analysing current status of food irradiation in domestic and international markets, export and import, international market size, and of R and D - Analysis of examples for quarantine management in agricultural product exporting countries and use of irradiation technology for agricultural product quarantine, and changes in international quarantine management - Analysis of SOPs for food irradiation quarantine in international organization (CODEX, IPPC, WHO). U.S, EU, China, India, and Australia. - Collaborative researches of India/Korea and China/Korea entered into an agreement for market trials · Publishment of irradiation quarantine management SOPs agreed to CODEX standards - Collaborative researches for quarantine management, avoiding Technical Barrier to Trade (TBT), and Sanitary Phytosanitary Measures were conducted, and advanced SOPs agreed with WTO/FTA system were published

  11. Food Irradiation. Proceedings of the International Symposium on Food Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1966-11-15

    For some years research has been done in several countries, with the object of contributing to the world's food supplies, on the application of nuclear methods to food preservation and processing. The importance of food preservation is of particular relevance in certain regions of the world where up to thirty per cent of harvested foodstuffs are being lost because of damage by animal pests and microorganisms. A series of international meetings have been held on this subject; the first, held in 1958 at Harwell, was followed by further meetings in 1960 in Paris and in 1961 in Brussels. The International Symposium on Food Irradiation organized by the International Atomic Energy Agency and the Food and Agriculture Organization of the United Nations through their Joint Division of Atomic Energy in Agriculture, and held at the Karlsruhe Nuclear Research Centre, Karlsruhe, from 6 to 10 June 1966, at the generous invitation of the Government of the Federal Republic of Germany, is the most recent of this series of meetings. It was held for the purpose of exchanging the most up-to-date results of research, of contributing towards co-operative efforts between Member States, and of stimulating trade in the international exchange of irradiated products between nations. Papers describing research over the past fourteen years were given by outstanding authorities; the results point to a breakthrough having been achieved in the use of ionizing radiation in food preservation, notwithstanding some problems still to be solved, such as overcoming changes in colour, flavour, odour or texture. The Symposium was attended by over 200 scientists from 25 countries and four international organizations. Sixty-nine papers were presented. It was shown that a wide variety of foodstuffs exist for which radiation could be used for three different purposes: to produce indefinitely stable products, to rid food of organisms that constitute health hazards, and to extend the normal shelf or market life

  12. Food Irradiation. Proceedings of the International Symposium on Food Irradiation

    International Nuclear Information System (INIS)

    1966-01-01

    For some years research has been done in several countries, with the object of contributing to the world's food supplies, on the application of nuclear methods to food preservation and processing. The importance of food preservation is of particular relevance in certain regions of the world where up to thirty per cent of harvested foodstuffs are being lost because of damage by animal pests and microorganisms. A series of international meetings have been held on this subject; the first, held in 1958 at Harwell, was followed by further meetings in 1960 in Paris and in 1961 in Brussels. The International Symposium on Food Irradiation organized by the International Atomic Energy Agency and the Food and Agriculture Organization of the United Nations through their Joint Division of Atomic Energy in Agriculture, and held at the Karlsruhe Nuclear Research Centre, Karlsruhe, from 6 to 10 June 1966, at the generous invitation of the Government of the Federal Republic of Germany, is the most recent of this series of meetings. It was held for the purpose of exchanging the most up-to-date results of research, of contributing towards co-operative efforts between Member States, and of stimulating trade in the international exchange of irradiated products between nations. Papers describing research over the past fourteen years were given by outstanding authorities; the results point to a breakthrough having been achieved in the use of ionizing radiation in food preservation, notwithstanding some problems still to be solved, such as overcoming changes in colour, flavour, odour or texture. The Symposium was attended by over 200 scientists from 25 countries and four international organizations. Sixty-nine papers were presented. It was shown that a wide variety of foodstuffs exist for which radiation could be used for three different purposes: to produce indefinitely stable products, to rid food of organisms that constitute health hazards, and to extend the normal shelf or market life

  13. International training workshop on quality control and management of food irradiation

    International Nuclear Information System (INIS)

    2004-01-01

    The International Training Workshop on Quality Control and Management of Food Indantrione was hold from 28-30, August, 2004 in Beijing, China and organized by Chinese Society of Nuclear Agriculture and China Isotope and Radiation Association. 10 Articles were collected in this symposium including training lectures. The contents included: international developments in food irradiation, Quality control and magement of food irradiation, industrializing development of irradiated food in China, Food irradiator and its quality management, research in setting standard for enterprise about irradiated products and etc.

  14. International Cooperation to Establish Standard Operating Procedure (SOP) for Quarantine Management of Irradiated Foods in International Trade

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J. W.; Byun, M. W.; Kim, J. H.; Choi, J. I.; Song, B. S.; Yoon, Y. H.; Kim, D. H.; Kim, W. G.; Kim, K. P.

    2010-02-15

    {center_dot} Development of SOPs through various research activities such as building international cooperation, and analysing current status of food irradiation in domestic and international markets, export and import, international market size, and of R and D - Analysis of examples for quarantine management in agricultural product exporting countries and use of irradiation technology for agricultural product quarantine, and changes in international quarantine management - Analysis of SOPs for food irradiation quarantine in international organization (CODEX, IPPC, WHO). U.S, EU, China, India, and Australia. - Collaborative researches of India/Korea and China/Korea entered into an agreement for market trials {center_dot} Publishment of irradiation quarantine management SOPs agreed to CODEX standards - Collaborative researches for quarantine management, avoiding Technical Barrier to Trade (TBT), and Sanitary Phytosanitary Measures were conducted, and advanced SOPs agreed with WTO/FTA system were published

  15. How to improve the irradiation conditions for the International Fusion Materials Irradiation Facility

    CERN Document Server

    Daum, E

    2000-01-01

    The accelerator-based intense D-Li neutron source International Fusion Materials Irradiation Facility (IFMIF) provides very suitable irradiation conditions for fusion materials development with the attractive option of accelerated irradiations. Investigations show that a neutron moderator made of tungsten and placed in the IFMIF test cell can further improve the irradiation conditions. The moderator softens the IFMIF neutron spectrum by enhancing the fraction of low energy neutrons. For displacement damage, the ratio of point defects to cascades is more DEMO relevant and for tritium production in Li-based breeding ceramic materials it leads to a preferred production via the sup 6 Li(n,t) sup 4 He channel as it occurs in a DEMO breeding blanket.

  16. Influences of irradiation on the anastomotic sites of artificial graft

    International Nuclear Information System (INIS)

    Ogawa, Junichi; Inoue, Hiroshi; Koide, Shirosaku; Kawada, Shimei; Shotsu, Akira

    1989-01-01

    To examine the acute influences of irradiation on the anastomotic sites of EPTFE vascular grafts, experimental study was performed using canine dogs. After replacement of superior vena cava and bilateral femoral arteries with EPTFE grafts, a total of 20 to 100 Gy doses were given at the anastomotic sites of superior vena cava and right femoral artery. There were no degradation of grafts themselves or rupture in the anastomoses at cumulative anastomotic sites of superior vena cava, stenoses and/or overgrowth of granulation tissues were observed, although at those of right femoral artery, no remarkable differences were observed between dogs which received irradiation and those which did not receive. (author)

  17. Internal friction in irradiated silicon

    International Nuclear Information System (INIS)

    Kalanov, M.U.; Pajzullakhanov, M.S.; Khajdarov, T.; Ummatov, Kh.

    1999-01-01

    The submicroscopic heterogeneities in mono- and polycrystal silicon and the influence of X-ray radiation on them were investigated using the ultrasound resonance method. Disk-shaped samples of 27.5 mm in diameter and 4 mm in thickness, with the flat surface parallel to crystallographic plane (111), were irradiated by X-ray beam of 1 Wt/cm 2 (50 KeV, Mo K α ) during 10 hours. Relations of internal frictions (Q -1 ) of samples and their relative attitude (ψ) - Q -1 (ψ) show that there is a presence of double-humped configuration for monocrystal silicon with the peaks at ψ=900 and 270 degrees. The relations Q -1 (ψ) remain the same after the irradiation. However, the peak width becomes larger. This data show that the configuration and attitude of the heterogeneities remain the same after the irradiation. The double-humped configuration was not discovered for the relations Q -1 (ψ) of polycrystal silicon. It is explained by the fact that there is an isotropic distribution in the content of many blocks and granules

  18. The characteristics and mechanism of apoptosis induced by internal irradiation

    International Nuclear Information System (INIS)

    Hong Chengjiao; Zhang Junning; Zhu Shoupeng

    2001-01-01

    Apoptosis in tumor cells induced by radionuclides is likely the most effective way to cure cancer. In order to explore the possibility in clinic application, the characteristics and mechanism of apoptosis induced by internal irradiation were investigated. The apoptosis and expressions of bcl-2mRNA, bcl-2 and bax of K 562 cells following internal exposure with different accumulated absorbed doses of strontium-89 were studied. 6 h after irradiation, the characteristics of apoptosis and necrosis appeared in K 562 cells. The apoptosis and necrosis enhanced with the prolongation of internally contaminated time at 6 h, 9 h, 12 h, 24 h and 48 h. The expressions of bcl-2mRNA decreased at 12 h, most remarkably at 24 h. The expressions of bcl-2 decreased after irradiation whereas bax had no obvious changes. The results suggest that the apoptosis induced by internal exposure may be regulated by lower expressions of bcl-2mRNA and bcl-2, lower bcl-2/bax value

  19. Food Preservation by Irradiation. Vol. II. Proceedings of an International Symposium on Food Preservation by Irradiation

    International Nuclear Information System (INIS)

    1978-01-01

    In the task of alleviating the distress caused by the world-wide food shortage it is essential to preserve what has been grown and harvested in the fields. Clearly all suitable methods for preserving agricultural produce and food should be made use of. In this context treatment with ionizing radiation has proved its value as an environmentally clean, physical method of food preservation which is low in its energy requirement, but the volume of food being processed in this way is still low. The introduction of food irradiation on a global basis poses certain economic, legal, regulatory and health-related questions, the solution of which requires close international collaboration. Such collaboration between many international, intergovernmental and national organizations began over a decade ago. The need for dissemination and discussion of information gained through research and development work on this subject became apparent, and a number of inter-regional meetings were held. The last international symposium on the topic was held jointly by FAO and the IAEA in 1972 in Bombay. To review progress made since then, FAO and the IAEA, together with WHO, convened the present Symposium on 21-25 November 1977. It appeared timely to hold this Symposium for the following reasons: (1) Apart from significant scientific work reported in the literature, progress in other directions between 1972 and 1977 had also been made. For example, the number of food items authorized by governments, with or without restriction, had grown from 19 to 26, and the number of countries accepting one or more irradiated foods for human consumption had increased from 11 to 19. (2) Largely on the basis of the work of the International Project in the Field of Food Irradiation (Karlsruhe), already described at the Bombay Symposium, an international expert committee, jointly convened by FAO, the IAEA and WHO in August-September 1976, had made important statements on the philosophy of wholesomeness studies

  20. Food Preservation by Irradiation. Vol. I. Proceedings of an International Symposium on Food Preservation by Irradiation

    International Nuclear Information System (INIS)

    1978-01-01

    In the task of alleviating the distress caused by the world-wide food shortage it is essential to preserve what has been grown and harvested in the fields. Clearly all suitable methods for preserving agricultural produce and food should be made use of. In this context treatment with ionizing radiation has proved its value as an environmentally clean, physical method o f food preservation which is low in its energy requirement, but the volume of food being processed in this way is still low. The introduction o f food irradiation on a global basis poses certain economic, legal, regulatory and health-related questions, the solution o f which requires close international collaboration. Such collaboration between many international, intergovernmental and national organizations began over a decade ago. The need for dissemination and discussion o f information gained through research and development work on this subject became apparent, and a number of inter-regional meetings were held. The last international symposium on the topic was held jointly by FAO and the IAEA in 1972 in Bombay. To review progress made since then, FAO and the IAEA, together with WHO, convened the present Symposium on 21-25 November 1977. It appeared timely to hold this Symposium for the following reasons: (1) Apart from significant scientific work reported in the literature, progress in other directions between 1972 and 1977 had also been made. For example, the number of food items authorized by governments, with or without restriction, had grown from 19 to 26, and the number of countries accepting one or more irradiated foods for human consumption had increased from 11 to 19. (2) Largely on the basis of the work of the International Project in the Field of Food Irradiation (Karlsruhe), already described at the Bombay Symposium, an international expert committee, jointly convened by FAO, the IAEA and WHO in August-September 1976, had made important statements on the philosophy of wholesomeness

  1. The dynamics of immunologic reactions in rats affected by repeated external γ-irradiation and internal irradiation with radionuclides

    International Nuclear Information System (INIS)

    Shubik, V.M.; Livshits, R.E.

    1975-01-01

    Nonspecific factors of immunity and formation of autoantibodies in rats exposed to comparable doses of repeated external γ-irradiation and of internal irradiation with Cs 137 , Sr 90 and I 131 chronically administered to animals have been studied comparatively. No essential variations have been found in changes induced in the immunologic reactions by chronic external and even internal γ-irradiation. Certain peculiarities have been revealed in the character of changes in the immunologic reactions depending on biophysical properties of the radionuclides used in the experiments

  2. Pyrimidine dimer sites associated with the daughter DNA strands in uv-irradiated human fibroblasts

    Energy Technology Data Exchange (ETDEWEB)

    Lehmann, A R; Kirk-Bell, S [Sussex Univ., Brighton (UK)

    1978-03-01

    Pyrimidine dimer sites associated with the newly-synthesized DNA were detected during post-replication repair of DNA in uv-irradiated human fibroblasts. These pyrimidine dimer sites were inferred from a decrease in the molecular weight of pulse-labelled DNA after treatment with an extract of Micrococcus luteus containing uv-specific endonuclease activity. In DNA synthesized immediately after irradiation, the frequency of these daughter strand dimer sites was 7 to 20% of that in the parental DNA. Such sites were found in fibroblasts from normal donors and from xeroderma pigmentosum patients (with defects in excision-repair or post-replication repair). They were excised from the DNA of normal cells. As the time between uv irradiation and pulse-labelling was increased, the frequency of dimer sites associated with the labelled DNA decreased. If the pulse-label was delivered 6 h after irradiation of normal cells or excision-defective xeroderma pigmentosum cells, no dimer sites were detected in the labelled DNA. It has usually been assumed that daughter-strand dimer sites were the result of recombinational exchanges. The assay procedure used in these experiments and in similar experiments of others did not distinguish between labelled DNA containing pyrimidine dimers within the labelled section, and labelled DNA which did not contain pyrimidine dimers but was attached to unlabelled DNA which did contain dimers. The latter structures would arise during normal replication immediately following uv irradiation of mammalian cells. Calculations are presented which suggest that a significant proportion and conceivably all of the dimer sites associated with the daughter strands may have arisen in this way, rather than from recombinational exchanges as has been generally assumed.

  3. Pyrimidine dimer sites associated with the daughter DNA strands in UV-irradiated human fibroblasts

    International Nuclear Information System (INIS)

    Lehmann, A.R.; Kirk-Bell, S.

    1978-01-01

    Pyrimidine dimer sites associated with the newly-synthesized DNA were detected during post-replication repair of DNA in UV-irradiated human fibroblasts. These pyrimidine dimer sites were inferred from a decrease in the molecular weight of pulse-labelled DNA after treatment with an extract of Micrococcus luteus containing UV-specific endonuclease activity. In DNA synthesized immediately after irradiation the frequency of these daughter strand dimer sites was 7-20% of that in the parental DNA. Such sites were found in fibroblasts from normal donors and from xeroderma pigmentosum patients (with defects in excision-repair or post-replication repair). They were excised from the DNA of normal cells. As the time between UV-irradiation and pulse-labelling was increased, the frequency of dimer sites associated with the labelled DNA decreased. If the pulse-label was delivered 6 h after irradiation of normal cells or excision-defective xeroderma pigmentosum cells, no dimer sites were detected in the labelled DNA. It has usually been assumed that daughter-strand dimer sites were the result of recombinational exchanges. The assay procedure used in these experiments and in similar experiments of others did not distinguish between labelled DNA containing pyrimidine dimers within the labelled section, and labelled DNA which did not contain pyrimidine dimers but was attached to unlabelled DNA which did contain dimers. The latter structures would arise during normal replication immediately following UV-irradiation of mammalian cells. Calculations are presented which suggest that a significant proportion and conceivably all of the dimer sites associated with the daughter strands may have arisen in this way, rather than from recombinational exchanges as has been generally assumed. (author)

  4. Design of a permanent Cd-shielded epithermal neutron irradiation site in the Syrian Miniature Neutron Source Reactor

    International Nuclear Information System (INIS)

    Khattab, K.; Haddad, Kh.; Haj-Hassan, H.

    2008-01-01

    A Cd-shield (cylindrical shell 1 mm in thickness, 34 mm in diameter and 180 mm in length) was used to design a permanent epithermal neutron irradiation site for epithermal neutron activation analysis (ENAA) in the Syrian Miniature Neutron Source Reactor (MNSR). This site was achieved by shielding the surface of the aluminum tube of one of the outer irradiation sites. The calculated depression ratio of thermal neutron flux was 1/10. Homogeneity of the neutron flux in the first outer irradiation site has been found numerically using the WIMSD4 and CITATION codes and experimentally by irradiating five short copper wires using the outer irradiation capsule. Good agreement was obtained between the calculated and the measured results of the neutron flux distributions. (author)

  5. Design of a permanent Cd-shielded epithermal neutron irradiation site in the Syrian Miniature Neutron Source Reactor

    International Nuclear Information System (INIS)

    Khattab, K.; Haddad, Kh.; Haj-Hassan, H.

    2009-01-01

    A Cd-shield (cylindrical shell 1 mm in thickness, 34 mm in diameter and 180 mm in length) was used to design a permanent epithermal neutron irradiation site for epithermal neutron activation analysis (ENAA) in the Syrian Miniature Neutron Source Reactor (MNSR). This site was achieved by shielding the surface of the aluminum tube of one of the outer irradiation sites. The calculated depression ratio of thermal neutron flux was 1/10. Homogeneity of the neutron flux in the first outer irradiation site has been found numerically using the WIMSD4 and CITATION codes and experimentally by irradiating five short copper wires using the outer irradiation capsule. Good agreement was obtained between the calculated and the measured results of the neutron flux distributions. (author)

  6. Combined effect of external and internal irradiation

    International Nuclear Information System (INIS)

    Kiradzhiev, G.

    1987-01-01

    Some of the general regularities of the combined effect of external irradiation and iodine 131 are discussed. Data are adduced showing that modification of the effects of these two radiation factors, when jointly applied, is also determined by the quantitative relations of the applied doses of external and internal irradiation, referred to a particular moment of the effects. It was shown that the effects of the radionuclides in these combined radiation injuries are basically realized by two mechanisms: 1. changes are found in the radionuclide kinetic parameters (nonspecific effects); 2. changes in their kinetic parameters are absent (specific effect). These two mechanisms underlie different approaches to therapy

  7. Neutronics analysis of International Fusion Material Irradiation Facility (IFMIF). Japanese contributions

    International Nuclear Information System (INIS)

    Oyama, Yukio; Noda, Kenji; Kosako, Kazuaki.

    1997-10-01

    In fusion reactor development for demonstration reactor, i.e., DEMO, materials tolerable for D-T neutron irradiation are absolutely required for both mechanical and safety point of views. For this requirement, several kinds of low activation materials were proposed. However, experimental data by actual D-T fusion neutron irradiation have not existed so far because of lack of fusion neutron irradiation facility, except fundamental radiation damage studies at very low neutron fluence. Therefore such a facility has been strongly requested. According to agreement of need for such a facility among the international parties, a conceptual design activity (CDA) of International Fusion Material Irradiation Facility (IFMIF) has been carried out under the frame work of the IEA-Implementing Agreement. In the activity, a neutronics analysis on irradiation field optimization in the IFMIF test cell was performed in three parties, Japan, US and EU. As the Japanese contribution, the present paper describes a neutron source term as well as incident deuteron beam angle optimization of two beam geometry, beam shape (foot print) optimization, and dpa, gas production and heating estimation inside various material loading Module, including a sensitivity analysis of source term uncertainty to the estimated irradiation parameters. (author)

  8. S1-sensitive sites in DNA after γ-irradiation

    International Nuclear Information System (INIS)

    Martin-Bertram, H.

    1981-01-01

    DNA from γ-irradiated T 1 bacteriophages was analyzed for 'single-stranded' sites by cleavage with S1 nuclease from Aspergillus oryzae as lesion probe. The ratio of 'S1-sensitive sites' to the amount of radiation-induced single-strand breaks was about one. Presumably these 'denatured' sites were associated with single-strand breaks. The subsequent check for the persistence of 'single-stranded' sites within the DNA molecule by thermokinetics demonstrated a strong affinity of the nuclease to its substrate, the single-stranded lesion, and a perfect excision. It is assumed that the direct absorption of radiation energy in the DNA gives rise to the formation of such bulky lesions. (Auth.)

  9. International Journal of Humanistic Studies: Site Map

    African Journals Online (AJOL)

    International Journal of Humanistic Studies: Site Map. Journal Home > About the Journal > International Journal of Humanistic Studies: Site Map. Log in or Register to get access to full text downloads.

  10. Influence of electron irradiation on internal friction and structure evolution of polymer composites

    International Nuclear Information System (INIS)

    Ismailova, G.A.

    2007-01-01

    Full text: Important qualitative information on structural evolution and radiation alterations in polymer materials under the action of ionizing radiation can be obtained from the analysis of the temperature dependences of internal friction. Changing of internal friction parameters of relax maxima during irradiation is qualitative degree parameter of radiation scission-cross linking of the polymer molecules. In this work, the general phenomenological approach is realized by introduction of the effective 'observed' parameters into the simple kinetic equations. The applicability of such approach is justified by the fact that kinetics of both internal friction and scission-cross linking processes can be characterized by the same effective parameters. Temperature dependences of internal friction are experimentally studied in epoxy irradiated by 2.5 MeV pulse electron beam to different doses (D=3 MGy, 6 MGy and 9 MGy). Time dependences of internal friction characteristics associated with radiation-induced processes of polymer scission and cross-linking are analyzed and discussed. Experimental data on kinetics of structural transformations in epoxy are interpreted on the base of analytical solutions of differential equations for free radical accumulation during and after irradiation subject to the arbitrary effective order of radical recombination. It is shown that in the range of doses and dose rates under study radiation-induced scission predominates during polymer irradiation but in a certain period of time after irradiation scission changes to cross-linking. Characteristics of the kinetic curves obtained essentially depend on the dose

  11. Worldwide status of food irradiation and the role of IAEA and other international organizations

    International Nuclear Information System (INIS)

    Loaharanu, P.

    1988-01-01

    While there has been an increasing interest in introducing irradiation for preservation and decontamination of food by national authorities and food industry, this technology has generated wide public debate in view of its perceived association with nuclear technology. The purpose of this paper is twofold: (1) to provide objectivity to the application of irradiation for food processing and (2) to project future trends of this technology. Irradiation appears to offer the most viable alternative to the existing technologies in quarantine treatment, hygienic quality of foods, reduction of food losses, and increase in market demand for fresh foods. Current limitations of food irradiation are discussed in terms of technical aspects, infrastructure and economics, consumer concerns, and harmonization of national regulations. Commercial applications have been reported in 19 countries. It is estimated that the total production of irradiated foods world-wide amounted to approximately 500,000 tons per annum. To ensure an effective implementation of the technology on a global basis, FAO and WHO have collaborated closely with the IAEA. An International Consultative Group on Food Irradiation was established under the aegis of FAO, IAEA, and WHO in May 1984. These organizations play an important role in training, technology transfer, developing guidelines on specific applications of food irradiation, international register of food irradiation facilities, acceptance and international trade in irradiated foods, and public information. (Namekawa, K.)

  12. Worldwide status of food irradiation and the role of IAEA and other international organizations

    Energy Technology Data Exchange (ETDEWEB)

    Loaharanu, P.

    1988-04-01

    While there has been an increasing interest in introducing irradiation for preservation and decontamination of food by national authorities and food industry, this technology has generated wide public debate in view of its perceived association with nuclear technology. The purpose of this paper is twofold: (1) to provide objectivity to the application of irradiation for food processing and (2) to project future trends of this technology. Irradiation appears to offer the most viable alternative to the existing technologies in quarantine treatment, hygienic quality of foods, reduction of food losses, and increase in market demand for fresh foods. Current limitations of food irradiation are discussed in terms of technical aspects, infrastructure and economics, consumer concerns, and harmonization of national regulations. Commercial applications have been reported in 19 countries. It is estimated that the total production of irradiated foods world-wide amounted to approximately 500,000 tons per annum. To ensure an effective implementation of the technology on a global basis, FAO and WHO have collaborated closely with the IAEA. An International Consultative Group on Food Irradiation was established under the aegis of FAO, IAEA, and WHO in May 1984. These organizations play an important role in training, technology transfer, developing guidelines on specific applications of food irradiation, international register of food irradiation facilities, acceptance and international trade in irradiated foods, and public information. (Namekawa, K.).

  13. Influence of chronic internal and acute external irradiations on the critical tissues of plants

    International Nuclear Information System (INIS)

    Kostyuk, O.P.; Ryasnenko, N.A.; Grodzins'kij, D.M.

    1998-01-01

    Peculiarities of chronic internal and acute external irradiations of the critical (as for irradiation influence) plants part, meristem, are studied. In particular, the investigation has aimed to evaluate the level of doses, accumulated by plant tissues, of the chronic internal irradiation from radiocaesium incorporated by them, and to compare its possible effect to one caused by the acute external irradiation. It is shown that the effects of both chronic and acute irradiations have similar features, and it is assumed that they have the very same mechanisms. We think that such a parameter of the plant ability to accumulate radiocaesium as the ratio of its content in a root tip and in the whole root system is a very sensible and useful criterion to estimate the irradiation influence on plants

  14. Determination of α and f for k0-NAA in irradiation sites with high thermalized neutrons

    International Nuclear Information System (INIS)

    Ho Manh Dung; Fumio Sasajima

    2003-01-01

    At the irradiation sites in a research reactor where neutrons are well thermalized, the 'bare' irradiation methods for α and f determinations that are incorporated in the KAYZERO R /SOLCOI R v4.0 package seem to be unworkable. It is a fact that when carrying out the determination of α and f at the PN-3 irradiation site of the JRR-3M research reactor (Tokai, Japan) using the KAYZERO software, unacceptable results were obtained from experiment to experiment for α ranging from 0.10 to 0.999 and f ranging from 70 to 9999. The 'Cd ratio' for a gold monitor in the PN-3 site is about 300. These unacceptable results have indicated the need for the application of Cd methods that are based on 'Cd-covered' irradiation and 'Cd-ratio' measurements at certain suitable and available monitors. Such Cd methods have not been incorporated into the KAYZERO v4.0 software. Therefore, computational and experimental procedures of the 'Cd-covered' method for α and the 'Cd-ratio' method for f determination have been presented in this paper. The PN-2 irradiation site of the JRR-3M reactor where the neutron thermalization is not high has a Cd ratio for gold of about 26. The commonly used 'bare' irradiation methods can be applied together with the Cd methods so that all results may be presented as comparable data. The results of α and f determinations that were carried out in the PN-2 and PN-3 irradiation sites are presented. (author)

  15. Study by internal friction of curing low temperature irradiation defects in graphite

    International Nuclear Information System (INIS)

    Rouby, Dominique.

    1974-01-01

    Micromechanical properties and anelastic effects of neutrons irradiated graphites at 300 and 77 0 K are investigated by internal friction analysis and elasticity modulus variations. Defects created by irradiation are studied and evolution versus dose and annealing is followed [fr

  16. Occurrence and elimination of sites sensitive to UV-endonuclease in UV-irradiated E. coli cells

    Energy Technology Data Exchange (ETDEWEB)

    Kleibl, K; Sedliakova, M [Slovenska Akademia Vied, Bratislava (Czechoslovakia). Vyskumny Ustav Onkologicky

    1979-01-01

    The occurrence and elimination of sites sensitive to the endonucleolytic action of crude extract from M. luteus (Es sites) were studied in both the parental and daughter DNA of E. coli B/r Hcr/sup +/ irradiated either with lethal fluence only (LF) or with inducing and lethal fluence (IF+LF); after the lethal fluence protein synthesis could either take place or it was inhibited by chlorampehnicol (CAP). The data obtained showed that in the wild type UV-irradiated cells Es sites could be eliminated from their DNA molecules either through pyrimidine dimer excision or through the modification of dimers on replication. It appears that DNA repair takes place most efficiently in cells irradiated with IF+LF and postincubated with CAP; in these conditions cells are supplied with inducible proteins, and enough time for DNA repair is provided before the division of irradiated cells is resumed.

  17. Mitigating IASCC of Reactor Core Internals by Post-Irradiation Annealing

    International Nuclear Information System (INIS)

    Was, Gary

    2017-01-01

    This final report summarizes research performed during the period between September 2012 and December 2016, with the objective of establishing the effectiveness of post-irradiation annealing (PIA) as an advanced mitigation strategy for irradiation-assisted stress corrosion cracking (IASCC). This was completed by using irradiated 304SS control blade material to conduct crack initiation and crack growth rate (CGR) experiments in simulated BWR environment. The mechanism by which PIA affects IASCC susceptibility will also be verified. The success of this project will provide a foundation for the use of PIA as a mitigation strategy for core internal components in commercial reactors.

  18. Mitigating IASCC of Reactor Core Internals by Post-Irradiation Annealing

    Energy Technology Data Exchange (ETDEWEB)

    Was, Gary [Univ. of Michigan, Ann Arbor, MI (United States)

    2017-06-02

    This final report summarizes research performed during the period between September 2012 and December 2016, with the objective of establishing the effectiveness of post-irradiation annealing (PIA) as an advanced mitigation strategy for irradiation-assisted stress corrosion cracking (IASCC). This was completed by using irradiated 304SS control blade material to conduct crack initiation and crack growth rate (CGR) experiments in simulated BWR environment. The mechanism by which PIA affects IASCC susceptibility will also be verified. The success of this project will provide a foundation for the use of PIA as a mitigation strategy for core internal components in commercial reactors.

  19. Device to irradiate agricultural product on the production site, after harvesting

    International Nuclear Information System (INIS)

    Jegu, Jean; Palomo, Georges; Blaive, Daniel.

    1982-01-01

    The invention concerns a device to irradiate agricultural product on the production site, after harvesting. It includes an outer shielding to absorb the radiations and containers in which the products are placed for irradiation. The shielding is rotationally symmetrical around a vertical axis and holds an irradiation chamber containing a radioactive bar fitted along the shielding axis. The cylindrical containers are placed around the chamber with their axes parallel to the axis of the shielding. They are set in rotation by a motor and receive the farm products through their top ends which communicate with a supply system. Their bottom ends are closed by shutters covering a means for evacuating the products. The invention applies in particular to the irradiation of newly dug potatoes to avoid germination [fr

  20. N-Acetyl-L-cysteine protects thyroid cells against DNA damage induced by external and internal irradiation.

    Science.gov (United States)

    Kurashige, Tomomi; Shimamura, Mika; Nagayama, Yuji

    2017-11-01

    We evaluated the effect of the antioxidant N-acetyl-L-cysteine (NAC) on the levels of reactive oxygen species (ROS), DNA double strand breaks (DSB) and micronuclei (MN) induced by internal and external irradiation using a rat thyroid cell line PCCL3. In internal irradiation experiments, ROS and DSB levels increased immediately after 131 I addition and then gradually declined, resulting in very high levels of MN at 24 and 48 h. NAC administration both pre- and also post- 131 I addition suppressed ROS, DSB and MN. In external irradiation experiments with a low dose (0.5 Gy), ROS and DSB increased shortly and could be prevented by NAC administration pre-, but not post-irradiation. In contrast, external irradiation with a high dose (5 Gy) increased ROS and DSB in a bimodal way: ROS and DSB levels increased immediately after irradiation, quickly returned to the basal levels and gradually rose again after >24 h. The second phase was in parallel with an increase in 4-hydroxy-2-nonenal. The number of MN induced by the second wave of ROS/DSB elevations was much higher than that by the first peak. In this situation, NAC administered pre- and post-irradiation comparably suppressed MN induced by a delayed ROS elevation. In conclusion, a prolonged ROS increase during internal irradiation and a delayed ROS increase after external irradiation with a high dose caused serious DNA damage, which were efficiently prevented by NAC. Thus, NAC administration even both after internal or external irradiation prevents ROS increase and eventual DNA damage.

  1. International Journal of Engineering, Science and Technology: Site ...

    African Journals Online (AJOL)

    International Journal of Engineering, Science and Technology: Site Map. Journal Home > About the Journal > International Journal of Engineering, Science and Technology: Site Map. Log in or Register to get access to full text downloads.

  2. Presence of UV-endonuclease sensitive sites in daughter DNA of UV-irradiated mammalian cells

    International Nuclear Information System (INIS)

    D'Ambrosio, S.; Setlow, R.B.

    1978-02-01

    Asynchronous Chinese hamster cells were irradiated with 10 Jm -2 uv radiation and 0.25 to 4 hours later pulse-labeled with [ 3 H]thymidine. Cells synchronized by shaking off mitotic and G 1 cells were irradiated in either the G 1 -phase or S-phase of the cell cycle and pulse-labeled with [ 3 H]thymidine in the S-phase. After a 12 to 14 hour chase in unlabeled medium, the DNA was extracted, incubated with Micrococcus luteus uv-endonuclease and sedimented in alkaline sucrose. The number of endonuclease sensitive sites decreased as the time between uv irradiation and pulse-labeling of daughter DNA increased. Further, there were significantly less endonuclease sensitive sites in the daughter DNA from cells irradiated in the G 1 -phase than in the S-phase. These data indicate that very few, if any, dimers are transferred from parental DNA to daughter DNA and that the dimers detected in daughter DNA may be due to the irradiation of replicating daughter DNA before labeling

  3. Metastatic carcinoma in the cervical lymph nodes from an unknown primary site: results of bilateral neck plus mucosal irradiation vs. ipsilateral neck irradiation

    International Nuclear Information System (INIS)

    Reddy, Sarada P.; Marks, James E.

    1997-01-01

    Purpose: To compare the outcome for patients with squamous cell carcinoma of cervical lymph nodes metastatic from an unknown primary site who were irradiated to both sides of the neck and potential mucosal sites with opposed photon beams, and for those irradiated to the ipsilateral side of the neck alone with an electron beam. Methods and Materials: Fifty-two patients with squamous cell carcinoma metastatic to cervical lymph nodes from an unknown primary site were irradiated by two different methods. Thirty-six were irradiated with a bilateral technique (BT), i.e., to both sides of the neck, including the naso-oro-hypopharyngeal mucosa, and 16 were irradiated with an electron beam (EB) to the ipsilateral side of the neck alone. Twenty patients of the BT group and 11 of the EB group had cervical lymph node dissections, and the remaining 21 patients had lymph node biopsies, prior to radiotherapy. Results: Tumor control in the ipsilateral side of the neck did not differ for either radiation technique, but was significantly higher after lymph node dissection than after biopsy (90 vs. 48%; p = 0.0004). Control of subclinical metastases in the contralateral cervical lymph nodes was higher for patients irradiated with BT than for patients irradiated with EB (86 vs. 56%; p 0.03). The occult primary was later discovered in 8% of the patients in the BT group and 44% of the EB group (p = 0.0005). The disease-free survival rate at 5 years for patients who had lymph node dissection prior to irradiation was 61%, and was 37% for those who had biopsy (p = 0.05). Only 20% of patients who subsequently developed an occult primary were salvaged and survived for 5 years after salvage treatment. Conclusion: Bilateral neck and mucosal irradiation is superior to ipsilateral neck irradiation in preventing contralateral cervical lymph node metastases and the subsequent appearance of an occult primary cancer. Both techniques combined with cervical lymph node dissection were equally effective

  4. IFMIF, International Fusion Materials Irradiation Facility conceptual design activity cost report

    International Nuclear Information System (INIS)

    Rennich, M.J.

    1996-12-01

    This report documents the cost estimate for the International Fusion Materials Irradiation Facility (IFMIF) at the completion of the Conceptual Design Activity (CDA). The estimate corresponds to the design documented in the Final IFMIF CDA Report. In order to effectively involve all the collaborating parties in the development of the estimate, a preparatory meeting was held at Oak Ridge National Laboratory in March 1996 to jointly establish guidelines to insure that the estimate was uniformly prepared while still permitting each country to use customary costing techniques. These guidelines are described in Section 4. A preliminary cost estimate was issued in July 1996 based on the results of the Second Design Integration Meeting, May 20--27, 1996 at JAERI, Tokai, Japan. This document served as the basis for the final costing and review efforts culminating in a final review during the Third IFMIF Design Integration Meeting, October 14--25, 1996, ENEA, Frascati, Italy. The present estimate is a baseline cost estimate which does not apply to a specific site. A revised cost estimate will be prepared following the assignment of both the site and all the facility responsibilities

  5. Facts about food irradiation. A series of fact sheets from the International Consultative Group on Food Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-12-01

    The safety and benefits of foods processed by ionizing radiation are well documented. In an effort to provide governments, especially those of developing countries, with scientifically accurate information on issues of general interest to the public, the International Consultative Group on Food Irradiation (ICGFI), which was established under the aegis of the Food and Agriculture Organization of the United Nations (FAO), the World Health Organization (WHO), and the IAEA, decided at its 7th Annual Meeting in Rome, Italy, on October 1990, to issue a series of ''Fact Sheets'' on the subject. ICGFI, an inter-governmental body with a membership of 37 governments, has as one of its mandates the function to provide information to Member States of the FAO, WHO, and IAEA and to the three organizations themselves on the safe and proper use of food irradiation technology. The Fact Sheets included here cover issues relating to: status and trends; scientific and technical terms; food irradiation and radioactivity; chemical changes in irradiated food; nutritional quality of irradiated foods; genetic studies; microbiological safety of irradiated food; irradiation and food safety; irradiation and food additives and residues; packaging of irradiated foods; safety of irradiation facilities; controlling the process; food irradiation costs; and irradiated foods and the consumer. The Fact Sheets have been separately indexed and included in the INIS Database under Reference Numbers 23011206-23011217, 23011319 and 23012743. The Fact Sheets were first issued by the ICGFI Secretariat (Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, Vienna, Austria) in May 1991.

  6. Facts about food irradiation. A series of fact sheets from the International Consultative Group on Food Irradiation

    International Nuclear Information System (INIS)

    1991-12-01

    The safety and benefits of foods processed by ionizing radiation are well documented. In an effort to provide governments, especially those of developing countries, with scientifically accurate information on issues of general interest to the public, the International Consultative Group on Food Irradiation (ICGFI), which was established under the aegis of the Food and Agriculture Organization of the United Nations (FAO), the World Health Organization (WHO), and the IAEA, decided at its 7th Annual Meeting in Rome, Italy, on October 1990, to issue a series of ''Fact Sheets'' on the subject. ICGFI, an inter-governmental body with a membership of 37 governments, has as one of its mandates the function to provide information to Member States of the FAO, WHO, and IAEA and to the three organizations themselves on the safe and proper use of food irradiation technology. The Fact Sheets included here cover issues relating to: status and trends; scientific and technical terms; food irradiation and radioactivity; chemical changes in irradiated food; nutritional quality of irradiated foods; genetic studies; microbiological safety of irradiated food; irradiation and food safety; irradiation and food additives and residues; packaging of irradiated foods; safety of irradiation facilities; controlling the process; food irradiation costs; and irradiated foods and the consumer. The Fact Sheets have been separately indexed and included in the INIS Database under Reference Numbers 23011206-23011217, 23011319 and 23012743. The Fact Sheets were first issued by the ICGFI Secretariat (Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, Vienna, Austria) in May 1991

  7. Experiences of an international trade action with irradiated onions between GDR and Hungary

    International Nuclear Information System (INIS)

    Zachariev, G.; Kiss, I.; Luther, T.; Huebner, G.; Doellstaedt, R.

    1988-01-01

    Extensive work has been carried out in the field of food irradiation in the GDR and Hungary in recent years. The irradiation of onions for sprout inhibition has reached a commercial stage in the GDR of more than 5,000 tons in 1986. The export of onions is the first example of international trade in irradiated food between socialist countries. Experiences of this trade is presented in the paper. Results of quality control of the bulbs (losses in weight an quality) after an intermediate storage period are discussed. Hungarian consumer reactions to irradiated onions is also evaluated. (author)

  8. Patterns of Failure After MammoSite Brachytherapy Partial Breast Irradiation: A Detailed Analysis

    International Nuclear Information System (INIS)

    Chen, Sea; Dickler, Adam; Kirk, Michael; Shah, Anand; Jokich, Peter; Solmos, Gene; Strauss, Jonathan; Dowlatshahi, Kambiz; Nguyen, Cam; Griem, Katherine

    2007-01-01

    Purpose: To report the results of a detailed analysis of treatment failures after MammoSite breast brachytherapy for partial breast irradiation from our single-institution experience. Methods and Materials: Between October 14, 2002 and October 23, 2006, 78 patients with early-stage breast cancer were treated with breast-conserving surgery and accelerated partial breast irradiation using the MammoSite brachytherapy applicator. We identified five treatment failures in the 70 patients with >6 months' follow-up. Pathologic data, breast imaging, and radiation treatment plans were reviewed. For in-breast failures more than 2 cm away from the original surgical bed, the doses delivered to the areas of recurrence by partial breast irradiation were calculated. Results: At a median follow-up time of 26.1 months, five treatment failures were identified. There were three in-breast failures more than 2 cm away from the original surgical bed, one failure directly adjacent to the original surgical bed, and one failure in the axilla with synchronous distant metastases. The crude failure rate was 7.1% (5 of 70), and the crude local failure rate was 5.7% (4 of 70). Estimated progression-free survival at 48 months was 89.8% (standard error 4.5%). Conclusions: Our case series of 70 patients with >6 months' follow-up and a median follow-up of 26 months is the largest single-institution report to date with detailed failure analysis associated with MammoSite brachytherapy. Our failure data emphasize the importance of patient selection when offering partial breast irradiation

  9. Alkali-labile sites and post-irradiation effects in single-stranded DNA induced by H radicals

    International Nuclear Information System (INIS)

    Lafleur, M.V.M.; Heuvel, N. van; Woldhuis, J.; Loman, H.

    1978-01-01

    Single-stranded phiX174 DNA in aqueous solutions has been irradiated in the absence of oxygen, under conditions in which H radicals react with the DNA. It was shown that H radical reactions result in breaks, which contribute approximately 10 per cent inactivation. Further, two types of alkali-labile sites were formed. One was lethal and gave rise to single-strand breaks by alkali and was most probably identical with post-irradiation heat damage and contributed about 33 per cent to the inactivation mentioned above. The other consisted of non-lethal damage, partly dihydropyrimidine derivatives, and was converted to lethal damage by alkali. This followed from experiments in which the DNA was treated with osmium-tetroxide, which oxidized thymine to 5,6-dihydroxydihydrothymine. Treatment with alkali of this DNA gave the same temperature dependence as found for the non-lethal alkali-labile sites in irradiated DNA. A similar temperature dependence was found for dihydrothymine and irradiated pyrimidines with alkali. (author)

  10. Internal friction measurements of Mo after low-temperature proton irradiation

    International Nuclear Information System (INIS)

    Tanimoto, H.; Mizubayashi, H.; Masuda, R.; Okuda, S.; Tagishi, Y.

    1992-01-01

    Internal friction measurements are performed in Mo after 20 MeV proton irradiation in order to clarify the behavior of self-interstitial atoms (SIA's) in Mo. In the low dose range, strong dislocation pinning suggesting the free migration of defects is observed at about 40 K and weak pinning at about 25 K. The features are very similar to those reported after neutron irradiation except that the 25 K pinning is much smaller after proton irradiation. The result suggests that the migration of free SIA's is responsible for the 40 K pinning and that of SIA-defect clusters, probably di-SIA's, formed during irradiation for the 25 K pinning. In the high dose range, the relaxation peaks are observed at about 13 and 41 K, where the close similarities are found between the present peaks and the corresponding peaks reported after neutron irradiation except that the peak height of the 41 K peak per unit concentration of Frenkel pairs (FP) tends to increase strongly with decreasing dose here. The latter fact suggests the strong interaction between SIA's. Then the smallness of the 41 K peak reported after electron irradiation with very high dose could be explained by an increased interaction between SIA's, but not by the two-dimensional migration of SIA's as proposed by Jacques and Robrock. Deformation given prior to irradiation causes a drastic decrease in the modulus defects associated with FP's (so-called bulk effect) and in the 13 K peak height. After neutron irradiation, no such effect of deformation was reported. A possible origin for this difference is discussed. (orig.)

  11. International standardization of instruments for neutron irradiation tests

    International Nuclear Information System (INIS)

    Tanimoto, Masataka; Shibata, Akira; Nakamura, Jinichi; Tsuchiya, Kunihiko; Cho, M.; Lee, C.; Park, S.; Choo, K.

    2012-01-01

    The JMTR in JAEA and HANARO in KAERI are the foremost testing/research reactors in the world and these are expected to contribute to many nuclear fields. As a part of instrument development in irradiation field, information exchange of instruments started from 2010 under the cooperation agreements between KAERI and JAEA. The instruments developed in JMTR and HANARO are introduced and cooperation experiments as future plan are discussed for international standardization. (author)

  12. Effects of Si3+ and H+ Irradiation on Tungsten Evaluated by Internal Friction Method

    International Nuclear Information System (INIS)

    Hu Jing; Wang Xianping; Fang Qianfeng; Liu Changsong; Zhang Yanwen; Zhao Ziqiang

    2013-01-01

    Effects of Si 3+ and H + irradiation on tungsten were investigated by internal friction (IF) technique. Scanning electron microscope (SEM) analysis revealed that sequential dual Si+H irradiation resulted in more serious damage than single Si irradiation. After irradiation, the IF background was significantly enhanced. Besides, two obvious IF peaks were initially found in temperature range of 70∼330 K in the sequential Si+H irradiated tungsten sample. The mechanism of increased IF background for the irradiated samples was suggested to originate from the high density dislocations induced by ion irradiation. On the other hand, the relaxation peak P L and non-relaxation peak P H in the Si+H irradiated sample were ascribed to the interaction process of hydrogen atoms with mobile dislocations and transient processes of hydrogen redistribution, respectively. The obtained experimental results verified the high sensitivity of IF method on the irradiation damage behaviors in nuclear materials

  13. IFMIF - International Fusion Materials Irradiation Facility Conceptual Design Activity/Interim Report

    International Nuclear Information System (INIS)

    Rennich, M.J.

    1995-12-01

    Environmental acceptability, safety, and economic viability win ultimately be the keys to the widespread introduction of fusion power. This will entail the development of radiation- resistant and low- activation materials. These low-activation materials must also survive exposure to damage from neutrons having an energy spectrum peaked near 14 MeV with annual radiation doses in the range of 20 displacements per atom (dpa). Testing of candidate materials, therefore, requires a high-flux source of high energy neutrons. The problem is that there is currently no high-flux source of neutrons in the energy range above a few MeV. The goal, is therefore, to provide an irradiation facility for use by fusion material scientists in the search for low-activation and damage-resistant materials. An accellerator-based neutron source has been established through a number of international studies and workshops' as an essential step for materials development and testing. The mission of the International Fusion Materials Irradiation Facility (IFMIF) is to provide an accelerator-based, deuterium-lithium (D-Li) neutron source to produce high energy neutrons at sufficient intensity and irradiation volume to test samples of candidate materials up to about a full lifetime of anticipated use in fusion energy reactors. would also provide calibration and validation of data from fission reactor and other accelerator-based irradiation tests. It would generate material- specific activation and radiological properties data, and support the analysis of materials for use in safety, maintenance, recycling, decommissioning, and waste disposal systems

  14. 15 years of existence of the International Consultative Group on Food Irradiation (ICGFI)

    International Nuclear Information System (INIS)

    Ehlermann, D.A.E.

    1999-01-01

    The ICGFI essentially contributed to international dissemination of unbiased information about the advantages and risks of food irradiation. The body has issued ICGFI publications containing codes of good practice for a variety of purposes, as eg. for operation of irradiation facilities for the treatment of food (GIP), or guidelines for due handling of irradiated food (GMP). Training courses have been offered to scientists, especially from developing countries, as well as for inspectors of national supervisory authorities. The activities of the advisory group as well as the conditions governing future activities are discussed. (orig./CB) [de

  15. International Fusion Materials Irradiation Facility injector acceptance tests at CEA/Saclay: 140 mA/100 keV deuteron beam characterization

    International Nuclear Information System (INIS)

    Gobin, R.; Bogard, D.; Chauvin, N.; Chel, S.; Delferrière, O.; Harrault, F.; Mattei, P.; Senée, F.; Cara, P.; Mosnier, A.; Shidara, H.; Okumura, Y.

    2014-01-01

    In the framework of the ITER broader approach, the International Fusion Materials Irradiation Facility (IFMIF) deuteron accelerator (2 × 125 mA at 40 MeV) is an irradiation tool dedicated to high neutron flux production for future nuclear plant material studies. During the validation phase, the Linear IFMIF Prototype Accelerator (LIPAc) machine will be tested on the Rokkasho site in Japan. This demonstrator aims to produce 125 mA/9 MeV deuteron beam. Involved in the LIPAc project for several years, specialists from CEA/Saclay designed the injector based on a SILHI type ECR source operating at 2.45 GHz and a 2 solenoid low energy beam line to produce such high intensity beam. The whole injector, equipped with its dedicated diagnostics, has been then installed and tested on the Saclay site. Before shipment from Europe to Japan, acceptance tests have been performed in November 2012 with 100 keV deuteron beam and intensity as high as 140 mA in continuous and pulsed mode. In this paper, the emittance measurements done for different duty cycles and different beam intensities will be presented as well as beam species fraction analysis. Then the reinstallation in Japan and commissioning plan on site will be reported

  16. Effects of neonatal. gamma. -ray irradiation on rat hippocampus: Pt. 2; Development of excitatory amino acid binding sites

    Energy Technology Data Exchange (ETDEWEB)

    Dessi, F; Represa, A; Ben-Ari, Y [Institut National de la Sante et de la Recherche Medicale (INSERM), 75 - Paris (France)

    1991-01-01

    In the rat, neonatal irradiation produces a destruction of denate granule cells and prevents the development of the mossy fibre-CA3 pyramidal cell synapse. The developmental increase of high affinity kainate binding sites in the stratum lucidum was reduced on the irradiated side as compared with the control side. This suggests that a proportion of high affinity kainate binding sites is associated with mossy fibres. In contrast, the development profile of N-methyl-D-aspartate binding sites, which are associated with associational and commissural synapses in CA3, was not affected by irradiation. The role that afferent fibres may play in the development of pyramidal cells is discussed in connection with the modulatory effects of glutamate receptors on the development of neurons. (author).

  17. Early radiation changes of normal dog brain following internal and external brain irradiation: A preliminary report

    International Nuclear Information System (INIS)

    Chin, H.; Maruyama, Y.; Markesbery, W.; Goldstein, S.; Wang, P.; Tibbs, P.; Young, B.; Feola, J.; Beach, L.

    1984-01-01

    To examine radiation-induced changes in the normal brain, internal or external radiation was given to normal dog brain. Seven medium-sized dogs were used in this study. Two dogs were controls and an ice-pick (plastic implant applicator) was placed in the right frontal lobe for about 5 hours but no irradiation. Two dogs underwent Cs-137 brain implantation for 4 and 5 hours, respectively using an ice-pick technique. Two dogs were given internal neutron irradiation using the same technique of intracerebral ice-pick brachytherapy. One dog received an external photon irradiation using 6-Mev Linear Accelerator. Postmortem microscopic examination was made to study the early cerebral changes to irradiation in three dogs: one control with no irradiation; one received intracerebral Cesium implantation; and one external photon irradiation. Vascular change was the most prominent microscopic finding. There were hemorrhage, endothelial proliferation and fibrinoid changes of small vessel wall. Most of the changes were localized in the white matter and the cortex remained intact. Details (CT, NMR and histological studies) are discussed

  18. Microstructural characterization and model of hardening for the irradiated austenitic stainless steels of the internals of pressurized water reactors; Caracterisation microstructurale et modelisation du durcissement des aciers austenitiques irradies des structures internes des reacteurs a eau pressurisee

    Energy Technology Data Exchange (ETDEWEB)

    Pokor, C

    2003-07-01

    The core internals of Pressurized Water Reactors (PWR) are composed of SA 304 stainless steel plates and CW 316 stainless steel bolts. These internals undergo a neutron flux at a temperature between 280 deg C and 380 deg C which modifies their mechanical properties. These modifications are due to the changes in the microstructure of these materials under irradiation which depend on flux, dose and irradiation temperature. We have studied, by Transmission Electron Microscopy, the microstructure of stainless steels SA 304, CW 316 and CW 316Ti irradiated in a mixed flux reactor (OSIRIS at 330 deg C between 0,8 dpa et 3,4 dpa) and in a fast breeder reactor at 330 deg C (BOR-60) up to doses of 40 dpa. Moreover, samples have been irradiated at 375 deg C in a fast breeder reactor (EBR-II) up to doses of 10 dpa. The microstructure of the irradiated stainless steels consists in faulted Frank dislocation loops in the [111] planes of austenitic, with a Burgers vector of [111]. It is possible to find some voids in the solution annealed samples irradiated at 375 deg C. The evolution of the dislocations loops and voids has been simulated with a 'cluster dynamic' model. The fit of the model parameters has allowed us to have a quantitative description of our experimental results. This description of the microstructure after irradiation was coupled together with a hardening model by Frank loops that has permitted us to make a quantitative description of the hardening of SA 304, CW 316 and CW 316Ti stainless steels after irradiation at a certain dose, flux and temperature. The irradiation doses studied grow up to 90 dpa, dose of the end of life of PWR internals. (author)

  19. Formation and reparation of the AP-sites into DNA from the gamma-irradiated embryo of bombyx mori

    International Nuclear Information System (INIS)

    Agaev, F.A.; Gaziyev, A.I.

    2002-01-01

    Full text: It is well known that radiosensitivity of an organism is in dependence on the DNA reparation systems functioning into cells. Sharp difference in the radioresistance of silkworm embryo at different stage of growth showed by us earlier (Agaev F.A. et al, 1991) can provide to suggest that DNA reparation system into cells of 3-daily embryo (more radiosensitive stage) and 7-daily embryo (more radioresistance stage) may be functioning with various efficiency. It was shown that quantity of the AP-sites (i.e. apurine and apirimidine sites) registered into DNA of 3-daily embryo is 1,2 - 1,4 time more, that into DNA of 7-daily embryo g-irradiated at the same dozes. The increasing of the difference between the registered AP-sites into DNA of 3- and 7-daily embryo has been observed also at the increasing of the radiation doze. At the postradiation incubation of the 3- and 7- daily embryo the lowering of AP-sites quantity into DNA was observed. This fact allowed to testify that the reparation system of damages, such as DNA-apurinization and apirimidinization are functioned into these embryo cells. At the same time the rate of the AP-sites reparation into embryo cells is varied. For example, the remanent quantity of AP-sites into DNA of 7-daily embryo after 45 min of postradiation period consists of 30% those registered immediately after embryo irradiation. The remanent quantity of AP-sites into DNA of 3-daily embryo is lowered on 50%. The difference in the rate of cells reparation is keeping at the constant level irrespective of g-irradiation doze. The binding reaction between the /14 centigrade/-methoxyamine and AP-sites in DNA in vitro has been showed that the reparation time of the 50% AP-sites for 3-daily embryo is 45 min and for 7-daily embryo is 30 min in respective to registered value at once after 100 Gy irradiation doze. In spite of essential difference in the both AP-sites formation into DNA of 3- and 7-daily embryo at once after irradiation and the

  20. Low temperature internal friction on γ-irradiated polyvinylidene fluoride (PVDF)

    International Nuclear Information System (INIS)

    Callens, A.; Eersels, L.; De Batist, R.

    1978-01-01

    A least-squares fitting of the below room temperature part of the internal friction spectra, obtained by the torsion pendulum technique on as-received and γ-irradiated (up to 1 Grad) strips and fibres of polyvinylidene fluoride by a superposition of single Debye functions, reveals that the spectral component features are determined not only by purely amorphous chain characteristics but also by the dose-dependence of crystallinity. A careful analysis of the relaxation spectra confirms that at least one relaxation effect (approximately 236 K) is created upon irradiation. The analysis of the dose dependence of the characteristics of the β (glass transition; approximately 220 K) and βsub(u) (apparent upper glass transition; approximately 270 K) relaxations, suggests the probable influence of crystallinity on the molecular motion in the amorphous phase. The increase of the intensity of the γ relaxation (approximately 190 K) is related to the irradiation-induced crystallite degradation. (author)

  1. Investigation of reactivity changes due to flooding the irradiation sites of the MNSR reactor using the MCNP code and comparison with experimental results

    Directory of Open Access Journals (Sweden)

    A Shirani

    2010-06-01

    Full Text Available In this work, the Isfahan Miniature Neutron Source Reactor (MNSR has been simulated using the MCNP code, and reactivity worth of flooding the inner irradiation sites of this reactor in an accident has been calculated. Also, by inserting polyethylene capsules containing water inside the inner irradiation sites, reactivity changes of this reactor in same such accident have been measured, the results of which are in good agreements with the calculated results. In this work, the reactivity worth due to flooding one inner irradiation site is 0.53mk , and reactivity worth due to flooding of the whole 5 inner irradiation sites is 2.61 mk.

  2. Internal friction study of neutron-irradiation effects on an amorphous Cu40Ti60 alloy

    International Nuclear Information System (INIS)

    Dong, Y.; Wu, G.; Xiao, K.; Li, X.; He, Y.

    1988-01-01

    Effects of neutron irradiation on the structure of an amorphous Cu 40 Ti 60 alloy have been studied by internal friction measurements. After irradiation, the position of the first internal friction peak remains almost unchanged and the shoulder position shifts towards a higher temperature by about 5 K, which indicates that the Cu 40 Ti 60 glass becomes more stable. These results are finally discussed based on the concept of changes of chemical short-range ordering and geometrical short-range ordering due to radiation damage

  3. Characterization of neutron flux spectra in the irradiation sites of a 37 GBq {sup 241}Am-Be isotopic source

    Energy Technology Data Exchange (ETDEWEB)

    Yücel, Haluk [Ankara University, Institute of Nuclear Sciences, 06100 Tandogan, Ankara (Turkey); Budak, Mustafa Guray, E-mail: mbudak@gazi.edu.tr [Gazi University, Gazi Education Faculty, 06500 Teknikokullar, Ankara (Turkey); Karadag, Mustafa [Gazi University, Gazi Education Faculty, 06500 Teknikokullar, Ankara (Turkey); Yüksel, Alptuğ Özer [Ankara University, Institute of Nuclear Sciences, 06100 Tandogan, Ankara (Turkey)

    2014-11-01

    Highlights: • An irradiation unit was installed using a 37 GBq {sup 241}Am-Be neutron source. • The source neutrons moderated by using both water and paraffin. • Irradiation unit was shielded by boron oxide and lead against neutrons and gammas. • There are two sites for irradiations, one of them has a pneumatic transfer system. • Cadmium ratio method was used for irradiation site characterization. - Abstract: For the applicability of instrumental neutron activation analysis (NAA) technique, an irradiation unit with a 37 GBq {sup 241}Am-Be neutron source was installed at Institute of Nuclear Sciences of Ankara University. Design and configuration properties of the irradiation unit are described. It has two different sample irradiation positions, one is called site #1 having a pneumatic sample transfer system and the other is site #2 having a location for manual use. In order to characterize neutron flux spectra in the irradiation sites, the measurement results were obtained for thermal (φ{sub th}) and epithermal neutron fluxes (φ{sub epi}), thermal to epithermal flux ratio (f) and epithermal spectrum shaping factors (α) by employing cadmium ratios of gold (Au) and molybdenum (Mo) monitors. The activities produced in these foils were measured by using a p-type, 44.8% relative efficiency HPGe well detector. For the measured γ-rays, self-absorption and true coincidence summing effects were taken into account. Additionally, thermal neutron self-shielding and resonance neutron self-shielding effects were taken into account in the measured results. For characterization of site #1, the required parameters were found to be φ{sub th} = (2.11 ± 0.05) × 10{sup 3} n cm{sup −2} s{sup −1}, φ{sub epi} = (3.32 ± 0.17) × 10{sup 1} n cm{sup −2} s{sup −1}, f = 63.6 ± 1.5, α = 0.045 ± 0.009, respectively. Similarly, those parameters were measured in site #2 as φ{sub th} = (1.49 ± 0.04) × 10{sup 3} n cm{sup −2} s{sup −1}, φ{sub epi} = (2.93 ± 0

  4. International Journal of Pedagogy, Policy and ICT in Education: Site ...

    African Journals Online (AJOL)

    International Journal of Pedagogy, Policy and ICT in Education: Site Map. Journal Home > About the Journal > International Journal of Pedagogy, Policy and ICT in Education: Site Map. Log in or Register to get access to full text downloads.

  5. IFMIF : International Fusion Materials Irradiation Facility Conceptual Design Activity: Final report

    International Nuclear Information System (INIS)

    Martone, M.

    1997-01-01

    This report documents the results of the Conceptual Design Activity (CDA) on the International Fusion Materials Irradiation Facility (IFMIF), conducted during 1995 and 1996. The activity is under the auspices of the International Energy Agency (IEA) Implementing Agreement for a Programme of Research and Development on Fusion Materials. An IEA Fusion Materials Executive Subcommittee was charged with overseeing the IFMIF-CDA work. Participants in the CDA are the European Union, Japan, and the United States, with the Russian Federation as an associate member

  6. IFMIF : International Fusion Materials Irradiation Facility Conceptual Design Activity: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Martone, M [ENEA, Centro Ricerche Frascati, Rome (Italy)

    1997-01-01

    This report documents the results of the Conceptual Design Activity (CDA) on the International Fusion Materials Irradiation Facility (IFMIF), conducted during 1995 and 1996. The activity is under the auspices of the International Energy Agency (IEA) Implementing Agreement for a Programme of Research and Development on Fusion Materials. An IEA Fusion Materials Executive Subcommittee was charged with overseeing the IFMIF-CDA work. Participants in the CDA are the European Union, Japan, and the United States, with the Russian Federation as an associate member.

  7. Irradiation experiments on materials for core internals, pressure vessel and fuel cladding

    Energy Technology Data Exchange (ETDEWEB)

    Tsukada, Takashi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-03-01

    Materials degradation due to the aging phenomena is one of the key issues for the life assessment and extension of the light water reactors (LWRs). This presentation introduces JAERI`s activities in the field of LWR material researches which utilize the research and testing reactors for irradiation experiments. The activities are including the material studies for the core internals, pressure vessel and fuel cladding. These materials are exposed to the neutron/gamma radiation and high temperature water environments so that it is worth reviewing their degradation phenomena as the continuum. Three topics are presented; For the core internal materials, the irradiation assisted stress corrosion cracking (IASCC) of austenitic stainless steels is the present major concern. At JAERI the effects of alloying elements on IASCC have been investigated through the post-irradiation stress corrosion cracking tests in high-temperature water. The radiation embrittlement of pressure vessel steels is still a significant issue for LWR safety, and at JAERI some factors affecting the embrittlement behavior such as a dose rate have been investigated. Waterside corrosion of Zircaloy fuel cladding is one of the limiting factors in fuel rod performance and an in-situ measurement of the corrosion rate in high-temperature water was performed in JMTR. To improve the reliability of experiments and to extent the applicability of experimental techniques, a mutual utilization of the technical achievements in those irradiation experiments is desired. (author)

  8. An improved characterization method for international accountancy measurements of fresh and irradiated mixed oxide (MOX) fuel: helping achieve continual monitoring and safeguards through the fuel cycle

    Energy Technology Data Exchange (ETDEWEB)

    Evans, Louise G [Los Alamos National Laboratory; Croft, Stephen [Los Alamos National Laboratory; Swinhoe, Martyn T [Los Alamos National Laboratory; Tobin, S. J. [Los Alamos National Laboratory; Menlove, H. O. [Los Alamos National Laboratory; Schear, M. A. [Los Alamos National Laboratory; Worrall, Andrew [U.K. NNL

    2011-01-13

    Nuclear fuel accountancy measurements are conducted at several points through the nuclear fuel cycle to ensure continuity of knowledge (CofK) of special nuclear material (SNM). Non-destructive assay (NDA) measurements are performed on fresh fuel (prior to irradiation in a reactor) and spent nuclear fuel (SNF) post-irradiation. We have developed a fuel assembly characterization system, based on the novel concept of 'neutron fingerprinting' with multiplicity signatures to ensure detailed CofK of nuclear fuel through the entire fuel cycle. The neutron fingerprint in this case is determined by the measurement of the various correlated neutron signatures, specific to fuel isotopic composition, and therefore offers greater sensitivity to variations in fissile content among fuel assemblies than other techniques such as gross neutron counting. This neutron fingerprint could be measured at the point of fuel dispatch (e.g. from a fuel fabrication plant prior to irradiation, or from a reactor site post-irradiation), monitored during transportation of the fuel assembly, and measured at a subsequent receiving site (e.g. at the reactor site prior to irradiation, or reprocessing facility post-irradiation); this would confirm that no unexpected changes to the fuel composition or amount have taken place during transportation and/ or reactor operations. Changes may indicate an attempt to divert material for example. Here, we present the current state of the practice of fuel measurements for both fresh mixed oxide (MOX) fuel and SNF (both MOX and uranium dioxide). This is presented in the framework of international safeguards perspectives from the US and UK. We also postulate as to how the neutron fingerprinting concept could lead to improved fuel characterization (both fresh MOX and SNF) resulting in: (a) assured CofK of fuel across the nuclear fuel cycle, (b) improved detection of SNM diversion, and (c) greater confidence in safeguards of SNF transportation.

  9. IFMIF : International Fusion Materials Irradiation Facility Conceptual Design Activity: Executive summary

    International Nuclear Information System (INIS)

    1997-01-01

    This report is a summary of the results of the Conceptual Design Activity (CDA) on the International Fusion Materials Irradiation Facility (IFMIF), conducted during 1995 and 1996. The activity is under the auspices of the International Energy Agency (IEA) Implementing Agreement for a Programme of Research and Development on Fusion Materials. An IEA Fusion Materials Executive Subcommittee was charged with overseeing the IFMIF-CDA work. Participants in the CDA are the European Union, Japan, and the United States, with the Russian Federation as an associate member

  10. IFMIF : International Fusion Materials Irradiation Facility Conceptual Design Activity: Executive summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    This report is a summary of the results of the Conceptual Design Activity (CDA) on the International Fusion Materials Irradiation Facility (IFMIF), conducted during 1995 and 1996. The activity is under the auspices of the International Energy Agency (IEA) Implementing Agreement for a Programme of Research and Development on Fusion Materials. An IEA Fusion Materials Executive Subcommittee was charged with overseeing the IFMIF-CDA work. Participants in the CDA are the European Union, Japan, and the United States, with the Russian Federation as an associate member.

  11. Shipments of irradiated DIDO fuel from Risoe National Laboratory to the Savannah River Site - Challenges and achievements

    International Nuclear Information System (INIS)

    Anne, C.; Patterson, J.

    2003-01-01

    On September 28, 2000, the Board of Governors of Risoe National Laboratory decided to shut down the Danish research reactor DR3 due to technical problems (corrosion on the reactor aluminum tank). Shortly thereafter, the Danish Government asked the National Laboratory to empty the reactor and its storage pools containing a total of 255 DIDO irradiated elements and ship them to Savannah River Site in the USA as soon as possible. Risoe National Laboratory had previously contracted with Cogema Logistics to ship DR3 DIDO fuel elements to SRS through the end of the return program. The quantity of fuel was less than originally intended but the schedule was significantly shorter. It was agreed in June 2001 that a combination of Cogema Logistics' and NAC casks would be preferable, as it would allow Risoe to ship all the irradiated fuel in two shipments and complete the shipments by June 2002. Risoe National Laboratory, Cogema Logistics and NAC International had twelve months to perform the shipments including licensing, basket fabrication for the NAC-LWT casks and actual transport. The paper describes the challenging work that was accomplished to meet the date of June 2002. (author)

  12. Investigation of high flux test module for the international fusion materials irradiation facilities (IFMIF)

    International Nuclear Information System (INIS)

    Miyashita, Makoto; Sugimoto, Masayoshi; Yutani, Toshiaki

    2007-03-01

    This report describes investigation on structure of a high neutron flux test module (HFTM) for the International Fusion Materials Irradiation Facilities (IFMIF). The HFTM is aimed for neutron irradiation of a specimen in a high neutron flux domain of the test cell for irradiation ground of IFMIF. We investigated the overall structure of the HFTM that was able to include specimens in a rig and thermocouple arrangement, an interface of control signal and support structure. Moreover, pressure and the amount of the bend in the module vessel (a rectangular section pressure vessel) were calculated. The module vessel did a rectangular section from limitation of a high neutron flux domain. Also, we investigated damage of thermocouples under neutron irradiation, which was a temperature sensor of irradiation materials temperature control demanded high precision. Based on these results, drawings on the HTFM structure. (author)

  13. Hazard evaluation of The International Fusion Materials Irradiation Facility

    Energy Technology Data Exchange (ETDEWEB)

    Burgazzi, Luciano [ENEA-Centro Ricerche ' Ezio Clementel' , Advanced Physics Technology Division, Via Martiri di Monte Sole, 4, 40129 Bologna (Italy)]. E-mail: burgazzi@bologna.enea.it

    2005-01-15

    The International Fusion Materials Irradiation Facility (IFMIF) is aimed to provide an intense neutron source by a high current deuteron linear accelerator and a high-speed lithium flow target, for testing candidate materials for fusion. Liquid lithium is being circulated through a loop and is kept at a temperature above its freezing point. In the frame of the design phase called Key Element technology Phase (KEP), jointly performed by an international team to verify the most important risk factors, safety assessment of the whole plant has been required in order to identify the hazards associated with the plant operation. This paper discusses the safety assessments that were performed and their outcome: Failure Mode and Effect Analysis (FMEA) approach has been adopted in order to accomplish the task. Main conclusions of the study is that, on account of the safety and preventive measures adopted, potential plant related hazards are confined within the IFMIF security boundaries and great care must be exercised to protect workers and site personnel from operating the plant. The analysis has provided as a result a set of Postulated Initiating Events (PIEs), that is off-normal events, that could result in hazardous consequences for the plant, together with the total frequency and the list of component failures which could induce the PIE: this assures the exhaustive list of major initiating events of accident sequences, helpful to the further accident sequence analysis phase. Finally, for each one of the individuated PIEs, the evaluation of the accident evolution, in terms of effects on the plant and relative countermeasures, has allowed to verify that adequate measures are being taken both to prevent the accident occurrence and to cope with the accident consequences, thus assuring the fulfilment of the safety requirements.

  14. International Fusion Materials Irradiation Facility conceptual design activity. Present status and perspective

    International Nuclear Information System (INIS)

    Kondo, Tatsuo; Noda, Kenji; Oyama, Yukio

    1998-01-01

    For developing the materials for nuclear fusion reactors, it is indispensable to study on the neutron irradiation behavior under fusion reactor conditions, but there is not any high energy neutron irradiation facility that can simulate fusion reactor conditions at present. Therefore, the investigation of the IFMIF was begun jointly by Japan, USA, Europe and Russia following the initiative of IEA. The conceptual design activities were completed in 1997. As to the background and the course, the present status of the research on heavy irradiation and the testing means for fusion materials, the requirement and the technical basis of high energy neutron irradiation, and the international joint design activities are reported. The materials for fusion reactors are exposed to the neutron irradiation with the energy spectra up to 14 MeV. The requirements from the users that the IFMIF should satisfy, the demand of the tests for the materials of prototype and demonstration fusion reactors and the evaluation of the neutron field characteristics of the IFMIF are discussed. As to the conceptual design of the IFMIF, the whole constitution, the operational mode, accelerator system and target system are described. (K.I.)

  15. Internal friction in Al alloys after neutron irradiation at low temperature

    International Nuclear Information System (INIS)

    Takamura, S.; Kobiyama, M.

    1985-01-01

    Internal friction and elastic modulus of dilute Al alloys have been measured after fast neutron irradiation at about 5 K. The internal friction spectra in Al-Pb, Al-Si, Al-Zn, Al-Ag, Al-Sn and Al-In are very similar. This result suggests that the configuration of the interstitial-solute atom complex in these alloys is very similar. In Al-Mg, the main complexes have the configuration with nearly symmetry, but its internal friction spectrum is different from that of the above-mentioned alloys. The internal friction spectra and their annealing behavior in Al-Be, Al-Mn, Al-Fe and Al-Cu demonstrate that the configuration of their interstitial-solute atom complex seems to be different from each other and the main complex in these alloys is immobile until stage III. (author)

  16. Preliminary results of the International Fusion Materials Irradiation Facility deuteron injector

    Energy Technology Data Exchange (ETDEWEB)

    Gobin, R.; Adroit, G.; Bogard, D.; Bourdelle, G.; Chauvin, N.; Delferriere, O.; Gauthier, Y.; Girardot, P.; Guiho, P.; Harrault, F.; Jannin, J. L.; Loiseau, D.; Mattei, P.; Roger, A.; Sauce, Y.; Senee, F.; Vacher, T. [Commissariat a l' Energie Atomique et aux Energie Alternatives, CEA/Saclay, DSM/IRFU, 91191-Gif/Yvette (France)

    2012-02-15

    In the framework of the IFMIF-EVEDA project (International Fusion Materials Irradiation Facility-Engineering Validation and Engineering Design Activities), CEA/IRFU is in charge of the design, construction, and characterization of the 140 mA continuous deuteron injector, including the source and the low energy beam line. The electron cyclotron resonance ion source which operates at 2.45 GHz is associated with a 4-electrode extraction system in order to minimize beam divergence at the source exit. Krypton gas injection is foreseen in the 2-solenoid low energy beam line. Such Kr injection will allow reaching a high level of space charge compensation in order to improve the beam matching at the radio frequency quadrupole (RFQ) entrance. The injector construction is now completed on the Saclay site and the first plasma and beam production has been produced in May 2011. This installation will be tested with proton and deuteron beams either in pulsed or continuous mode at Saclay before shipping to Japan. In this paper, after a brief description of the installation, the preliminary results obtained with hydrogen gas injection into the plasma chamber will be reported.

  17. Literature study of the radiobiological parameters of Caesium-137 required for evaluating internal irradiation doses as a function of age; Etude bibliographique des parametres radiobiologiques du cesium-137 necessaires a l'evaluation des doses d'irradiation interne en fonction de l'age

    Energy Technology Data Exchange (ETDEWEB)

    Garnier, A [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-07-01

    This document reassembles information published in scientific literature on radiobiological parameters of Cs-137, necessary for the estimate of the internal irradiation dose of man according to his age (during growth). The data are completed by a commented review of the mathematical models, proposed in order to value the irradiation doses from ingested cesium and the biological parameters. (author) [French] Ce document rassemble les informations publiees dans la litterature scientifique, concernant les parametres radiobiologiqueo du cesium-137, necessaires a l'evaluation des doses d'irradiation interne de l'homme en fonction de l'age. Ces donnees sont completees par une revue commentee des modeles mathematiques proposes en vue de l'evaluation des doses d'irradiation a partir des quantites de cesium ingerees et des parametres biologiques. (auteur)

  18. The application of an internal state variable model to the viscoplastic behavior of irradiated ASTM 304L stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    McAnulty, Michael J., E-mail: mcanulmj@id.doe.gov [Department of Energy, 1955 Fremont Avenue, Idaho Falls, ID 83402 (United States); Potirniche, Gabriel P. [Mechanical Engineering Department, University of Idaho, Moscow, ID 83844 (United States); Tokuhiro, Akira [Mechanical Engineering Department, University of Idaho, Idaho Falls, ID 83402 (United States)

    2012-09-15

    Highlights: Black-Right-Pointing-Pointer An internal state variable approach is used to predict the plastic behavior of irradiated metals. Black-Right-Pointing-Pointer The model predicts uniaxial tensile test data for irradiated 304L stainless steel. Black-Right-Pointing-Pointer The model is implemented as a user-defined material subroutine in the finite element code ABAQUS. Black-Right-Pointing-Pointer Results are compared for the unirradiated and irradiated specimens loaded in uniaxial tension. - Abstract: Neutron irradiation of metals results in decreased fracture toughness, decreased ductility, increased yield strength and increased ductile-to-brittle transition temperature. Designers use the most limiting material properties throughout the reactor vessel lifetime to determine acceptable safety margins. To reduce analysis conservatism, a new model is proposed based on an internal state variable approach for the plastic behavior of unirradiated ductile materials to support its use for analyzing irradiated materials. The proposed modeling addresses low temperature irradiation of 304L stainless steel, and predicts uniaxial tensile test data of irradiated experimental specimens. The model was implemented as a user-defined material subroutine (UMAT) in the finite element software ABAQUS. Results are compared between the unirradiated and irradiated specimens subjected to tension tests.

  19. Degradation of austenitic stainless steel (SS) light water ractor (LWR) core internals due to neutron irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Rao, Appajosula S., E-mail: Appajosula.Rao@nrc.gov

    2014-04-01

    Austenitic stainless steels (SSs) are extensively being used in the fabrication of light water reactor (LWR) core internal components. It is because these steels have relatively high ductility, fracture toughness and moderate strength. However, the LWR internal components exposure to neutron irradiation over an extended period of plant operation degrades the materials mechanical properties such as the fracture toughness. This paper summarizes some of the results of the existing open literature data on irradiation assisted stress corrosion cracking (IASCC) of 316 CW steels that have been published by the United States Nuclear Regulatory Commission (USNRC), industry, academia, and other research agencies.

  20. The future Jules Horowitz material testing reactor: An opportunity for developing international collaborations on a major European irradiation infrastructure

    International Nuclear Information System (INIS)

    Parrat, D.; Bignan, G.; Maugard, B.; Gonnier, C.; Blandin, C.

    2015-01-01

    and extremely favourable situation for which future end-users can express very early their needs, thanks to either participation to the JHR Consortium, or to international programs or through bilateral collaborations. A general presentation of this research infrastructure and associated experimental capability has been made at the 9th WWER Fuel Performance Meeting in 2011. Current paper updates in a first part the facility building status and the current design work carried out on irradiation hosting systems for nuclear materials and nuclear fuels and on non-destructive examination benches. Then expected main performances are reviewed and collaborations set up around each study are also underlined, as they often correspond to an “in-kind” contribution of a Consortium member. Finally, recent developments in the international co-operation around the facility are highlighted, such as for example the CEA candidacy for the IAEA designation as an ICERR (International Center based on Research Reactors) or the numerous staff of secondees working on-site. Keywords: CEA, Material Testing Reactor, Jules Horowitz Reactor, Irradiation device, JHR Consortium, ICERR

  1. Current status of food irradiation overseas. Data update from 2013

    International Nuclear Information System (INIS)

    Todoriki, Setsuko

    2015-01-01

    As the movement of international standards and specifications, the treatment standards related to food irradiation have been summarized on the basis of the ISPM 28 Annex PT-19 of International Plant Protection Convention. As the movement in the United States, there are the following tables: (1) food and radiation dose approved by FDA, (2) lowest radiation dose for the pests of each quarantine target stipulated by the USDA/APHIS as the plant quarantine authorities of the United States Department of Agriculture, (3) items and production sites of vegetables/fruits about which irradiation treatment in import phytosanitary has been approved by USDA, and (4) import volume of irradiated fruits into the United States. The following statistics have also been summarized: (1) materials and irradiation dose permitted FSANZ, which is the food safety regulatory authorities of Australia and New Zealand, and (2) irradiation-treated amount of each food in the EU territory in 2013, and treated amount in each country. In Asia, the amount and facilities of irradiation treatment are described for ten countries including China, Thailand, India, etc. As the contents of the Coordinated Research Programs (CRPs) of International Atomic Energy Agency (IAEA), the following are introduced: (1) three items including 'Development of generic irradiation doses for quarantine treatments,' and (2) three items of the contents of 'The Regional Cooperative Agreement for Research, Development and Training Related to Nuclear Science and Technology for Asia and the Pacific: RCA).' (A.O.)

  2. International workshop on site investigation and evaluation based on the siting process in Sweden

    International Nuclear Information System (INIS)

    Andersson, Johan; Stroem, A.

    2001-06-01

    SKB's goal is to commence surface based site investigations in 2002. Extensive preparations are now being made for this transition to the next phase in the siting process for the deep repository for spent nuclear fuel. The purpose of the international workshop on site characterisation held at Aespoe April 2001 was to: present the SKB site investigation and evaluation programme to a group of international experts; discuss whether the available toolbox of investigation methods for surface based site investigations is appropriate and state-of-the-art in an international perspective; and by working group sessions discuss the level of ambition in the programme for site investigation for each discipline. This report summarises the conclusions of the workshop in general terms. Many of the detailed comments and ideas obtained at the workshop have already inspired and will also directly inspire the on-going planning work for site characterisation. The core activity at the workshop was the work performed by working groups. They addressed what should be considered for a site characterisation programme, based on the generic planning made so far by SKB. The working groups also outlined site specific characterisation programmes for the sites suggested by SKB. The tasks were strictly confined to technical and scientific modelling issues. The working group chairmen presented the working group results at the workshop and have also submitted short memos to SKB. The present document is a compilation of these memos. The SKB generic programme as presented in the existing top level documents, 'Requirements and Criteria and Overall Programme', received general endorsement and was appreciated for being comprehensive and systematic. For example, it contains comprehensive lists of parameters to be measured. However, there is need for prioritisation and sequencing. This is actually included in the current planning process at SKB where the generic programme later this year will be adapted to

  3. Microstructural characterization and model of hardening for the irradiated austenitic stainless steels of the internals of pressurized water reactors

    International Nuclear Information System (INIS)

    Pokor, C.

    2003-01-01

    The core internals of Pressurized Water Reactors (PWR) are composed of SA 304 stainless steel plates and CW 316 stainless steel bolts. These internals undergo a neutron flux at a temperature between 280 deg C and 380 deg C which modifies their mechanical properties. These modifications are due to the changes in the microstructure of these materials under irradiation which depend on flux, dose and irradiation temperature. We have studied, by Transmission Electron Microscopy, the microstructure of stainless steels SA 304, CW 316 and CW 316Ti irradiated in a mixed flux reactor (OSIRIS at 330 deg C between 0,8 dpa et 3,4 dpa) and in a fast breeder reactor at 330 deg C (BOR-60) up to doses of 40 dpa. Moreover, samples have been irradiated at 375 deg C in a fast breeder reactor (EBR-II) up to doses of 10 dpa. The microstructure of the irradiated stainless steels consists in faulted Frank dislocation loops in the [111] planes of austenitic, with a Burgers vector of [111]. It is possible to find some voids in the solution annealed samples irradiated at 375 deg C. The evolution of the dislocations loops and voids has been simulated with a 'cluster dynamic' model. The fit of the model parameters has allowed us to have a quantitative description of our experimental results. This description of the microstructure after irradiation was coupled together with a hardening model by Frank loops that has permitted us to make a quantitative description of the hardening of SA 304, CW 316 and CW 316Ti stainless steels after irradiation at a certain dose, flux and temperature. The irradiation doses studied grow up to 90 dpa, dose of the end of life of PWR internals. (author)

  4. Dielectric parameters of blood plasma in rats at external and internal irradiation with sublethal doses

    International Nuclear Information System (INIS)

    Khadzhidekova, E.; Kiradzhiev, G.

    1991-01-01

    Sexually mature male rats have received external gamma irradiation with 50, 200 or 380 cGy, treated with 89 Sr (333 or 1665 kBq per rat, femur dose 70, resp. 290 cGy), or 144 Ce (370 kBq per rat, liver dose 70 cGy). Dielectric parameters (permittivity and conductivity) have been measured in the frequency range 1.4 - 17 Mhz on different terms (1 to 30th day after the treatment). For all groups and terms the coefficients and equations describing the relationship between the dielectric permittivity ε and the frequency ν of the changing electric field have been calculated. On the basis of dielectric parameters the relaxation time of the plasma protein molecules is determined. It has been shown that the changes in dielectric permittivity are expressed at different frequencies specific for a given dose; the same is established for the conditions of internal irradiation. The frequency dependence of the permittivity is described as an exponential curve analogous to that of the control but with a changed exponent. In applying higher doses or activities the relationship turns from exponential to parabolic. The relaxation time, expressing the changes in conformal state of macromolecules, varies but is in all cases longer than one of the controls for the whole period of study at external irradiation with 50 and 380 cGy. It is lower at irradiation with 200 cGy, as well as at internal irradiation. 3 tabs., 13 refs

  5. Assessment of international remedial technologies for application to Superfund sites

    International Nuclear Information System (INIS)

    Sanning, D.E.

    1990-01-01

    This paper presents some of the logical arguments for conducting research on remedial technologies for contaminated land and groundwater at an international level. It gives information on many of the international organizations that are involved in environmental programs, but it especially gives emphasis to the NATO-CCMS pilot study on Demonstration of Remedial Action Technologies for Contaminated Land and Groundwater. The purpose of the study is to field demonstrate and evaluate new/innovative technologies for remedial action at uncontrolled hazardous waste sites. This study is a logical international extension of the US EPA SITE program. It offers the opportunity to obtain a multiple data base on various remedial action unit processes without any single country having to commit a disproportionate amount of its internal resources to any specific activity. Each participating country provides the necessary resources for those demonstrations which they are contributing to the study. Sites are selected by a majority vote of all participating countries (no country is permitted to vote for its own sites). The study is a 5 year program with participants from Canada, Denmark, Federal Republic of Germany, France, Greece, Italy, Japan, the Netherlands, Norway, Spain, and the US. The need for cost-effective remedial action technologies for hazardous waste sites is a problem of all industrialized countries. The need to build a knowledge base of emerging remedial technologies was the impetus behind the USEPA's lead role and commitment to this pilot study

  6. Literature study of the radiobiological parameters of Caesium-137 required for evaluating internal irradiation doses as a function of age; Etude bibliographique des parametres radiobiologiques du cesium-137 necessaires a l'evaluation des doses d'irradiation interne en fonction de l'age

    Energy Technology Data Exchange (ETDEWEB)

    Garnier, A. [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-07-01

    This document reassembles information published in scientific literature on radiobiological parameters of Cs-137, necessary for the estimate of the internal irradiation dose of man according to his age (during growth). The data are completed by a commented review of the mathematical models, proposed in order to value the irradiation doses from ingested cesium and the biological parameters. (author) [French] Ce document rassemble les informations publiees dans la litterature scientifique, concernant les parametres radiobiologiqueo du cesium-137, necessaires a l'evaluation des doses d'irradiation interne de l'homme en fonction de l'age. Ces donnees sont completees par une revue commentee des modeles mathematiques proposes en vue de l'evaluation des doses d'irradiation a partir des quantites de cesium ingerees et des parametres biologiques. (auteur)

  7. Adequate irradiation of the internal jugular lymph node chain: technical considerations

    International Nuclear Information System (INIS)

    Aref, Amr; Gross, Martin; Fontanesi, James; Devi, Syamala; Kopel, Christine; Thornton, Dale

    1997-01-01

    Purpose: This research aimed to study the anatomic relationship between the internal jugular vein with the surrounding internal jugular lymph node chain and the underlying bony anatomical structures which are commonly used as landmarks for radiation therapy planning. Methods and Materials: Twelve patients with carcinoma of the head and neck region were studied prospectively. Using our three-dimensional planning system, a beam's-eye view of the internal jugular vein was projected onto a lateral and anterior simulation film. Quantitative measurements were made in every case of the anatomic relationship between the internal jugular vein and the posterior border of the cervical vertebrae and sagittal midline. Results: The distance between the posterior border of the internal jugular vein and the posterior border of the cervical vertebrae ranged between 0 and 2.5 cm. The distances between the sagittal midline and the medial border of the internal jugular veins ranged between 2 and 4 cm. Conclusion: To ensure adequate irradiation of the internal jugular lymph nodes, the posterior border of the lateral radiation therapy upper-neck fields should be placed at least 1 cm posterior to the posterior aspect of the cervical vertebrae. The midline block used in the lower neck anterior field should not exceed 2 cm in width

  8. Calculation of absorbed dose of anchorage-dependent cells from internal beta-rays irradiation

    International Nuclear Information System (INIS)

    Chen Jianwei; Huang Gang; Li Shijun

    2001-01-01

    Objective: To elicit the formula of internal dosimetry in anchorage-dependent cells by beta-emitting radionuclides from uniformly distributed volume sources. Methods: By means of the definition of absorbed dose and the MIRD (Medical International Radiation Dose) scheme the formula of internal dosimetry was reasonably deduced. Firstly, studying the systems of suspension culture cells. Then, taking account of the speciality of the systems of the anchorage-dependent cells and the directions of irradiation, the absorbed dose of anchorage -dependent cells was calculated by the accumulated radioactivity, beta-ray energy, and the volume of the cultured systems. Results: The formula of internal dosimetry of suspension culture cells and anchorage-dependent cells were achieved. At the same time, the formula of internal dosimetry of suspension culture cells was compared with that of MIRD and was confirmed accurate. Conclusion: The formula of internal dosimetry is concise, reliable and accurate

  9. Pressure control of a proton beam-irradiated water target through an internal flow channel-induced thermosyphon.

    Science.gov (United States)

    Hong, Bong Hwan; Jung, In Su

    2017-07-01

    A water target was designed to enhance cooling efficiency using a thermosyphon, which is a system that uses natural convection to induce heat exchange. Two water targets were fabricated: a square target without any flow channel and a target with a flow channel design to induce a thermosyphon mechanism. These two targets had the same internal volume of 8 ml. First, visualization experiments were performed to observe the internal flow by natural convection. Subsequently, an experiment was conducted to compare the cooling performance of both water targets by measuring the temperature and pressure. A 30-MeV proton beam with a beam current of 20 μA was used to irradiate both targets. Consequently, the target with an internal flow channel had a lower mean temperature and a 50% pressure drop compared to the target without a flow channel during proton beam irradiation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Cell survival following alpha particle irradiation: critical sites and implications for carcinogenesis

    International Nuclear Information System (INIS)

    Lloyd, E.L.; Gemmell, M.A.; Henning, C.B.; Gemmell, D.S.; Zabransky, B.J.

    1976-01-01

    In experiments in which mammalian cells were irradiated with 5.6 MeV alpha particles from a Tandem Van de Graaff machine we have confirmed the finding of others that the mean lethal dose (D 0 ) is about 100 rad, but by measurements of the area of the cell nuclei as irradiated we found that this mean lethal dose corresponds not to 1, as expected, but to about 27 alpha particles per cell nucleus. (The exact number appears to change slightly with cell passage number.) This allows for the possibility that the direct action of alpha particles on the nucleus may be the important event in carcinogenesis, a theory which was previously difficult to accept if a single particle hitting the nucleus anywhere was considered to be lethal. Evidence is presented to implicate the nucleolus as a possible critical site for the inhibition of reproductive integrity of the cell

  11. IAEA and food irradiation

    International Nuclear Information System (INIS)

    Machi, Sueo

    1995-01-01

    IAEA was founded in 1957. 122 countries take part in it. It is operated with the yearly ordinary budget of about 20 billion yen and the technical cooperation budget of about 6 billion yen and by 2200 personnel. Its two important roles are the promotion of the peaceful utilization of atomic energy and the prevention of nuclear proliferation. The activities of IAEA are shown. The cooperation with developing countries and the international research cooperation program are the important activities. The securing of foods is an urgent subject, and the utilization of radiation and isotopes has been promoted, aiming at sustaining agriculture. The necessity of food irradiation is explained, and at present, commercial food irradiation is carried out in 28 countries including Japan. The irradiation less than 10 kGy does not cause poisonous effect in any food, according to JECFI. The new international agreement is expected to be useful for promoting the international trade of irradiated foods. The international cooperation for the spread of food irradiation and the public acceptance of food irradiation are reported. (K.I.)

  12. Acute effects of pulsed-laser irradiation on the arterial wall

    Science.gov (United States)

    Nakamura, Fumitaka; Kvasnicka, Jan; Lu, Hanjiang; Geschwind, Herbert J.; Levame, Micheline; Bousbaa, Hassan; Lange, Francoise

    1992-08-01

    Pulsed laser coronary angioplasty with an excimer or a holmium-yttrium-aluminum-garnet (Ho:YAG) laser may become an alternative treatment for patients with coronary artery disease. However, little is known about its acute consequences on the normal arterial wall. This study was designed to examine the acute histologic consequences of these two pulsed lasers on the arterial wall of normal iliac arteries in rabbits. Irradiation with each laser was performed in 15 normal iliac sites on eight male New Zealand white rabbits. The excimer laser was operated at 308 nm, 25 Hz, 50 mJ/mm2/pulse, and 135 nsec/pulse and the Ho:YAG laser was operated at 2.1 micrometers , 3/5 Hz, 400 mJ/pulse, and 250 microsecond(s) ec/pulse. The excimer and Ho:YAG laser were coupled into a multifiber wire-guided catheter of 1.4 and 1.5 mm diameter, respectively. The sites irradiated with excimer or Ho:YAG laser had the same kinds of histologic features, consisting of exfoliation of the endothelium, disorganization of internal elastic lamina, localized necrosis of vascular smooth muscle cells, and fissures in the medial layer. However, the sites irradiated with excimer laser had lower grading scores than those irradiated with Ho:YAG laser (p vascular injury.

  13. Calculation of the fast neutron flux spectrum in the MNSR inner irradiation site using the WIMSD4 code

    International Nuclear Information System (INIS)

    Khattab, K.

    2005-03-01

    The Miniature Neutron Source Reactor (MNSR) in Syria has five inner irradiation sites in the annulus Beryllium reflectors to analyze the unknown samples using the Neutron Activation Analysis technique and to produce medium and short half life isotopes. The fast neutron flux spectrum has a special importance in the MNSR reactor physics where this spectrum is required to measure the fast neutron flux in the MNSR inner irradiation sites. Hence, calculation of the fast neutron flux spectrum in the MNSR inner irradiation site is conducted in this work using the WIMSD4 code. The energy range is divided in the WIMSD4 to 69 energy groups. The first six energy groups represent the fast neutron ranging from 0.5 to 10 MeV. To calculate the fast neutron flux spectrum in the MNSR inner irradiation site using the WIMSD4 code, the MNSR is modeled as a super unit cell. This cell consists of three regions which are: the homogenized core, annulus Beryllium, and water. The fast neutron spectrum is calculated also using the U 235 fission neutron spectrum approximation. The U 235 fission neutron spectrum agrees very good with the WIMSD4 results when neutron energy exceeds 1 MeV, but it fails when the neutron energy ranges from 0.5 to 1 MeV. The WIMSD4 code is used as well to calculate the microscopic fission cross sections for the U 238 using six energy groups where a unit cell of U 238 is used since the U 238 is usually used to measure the fast neutron flux in the reactor. The macroscopic fission cross sections for the U 238 are calculated first then the microscopic fission cross sections are calculated knowing the U 238 atomic density. (Author)

  14. Calculation of the fast neutron flux spectrum in the MNSR inner irradiation site using the WIMSD4 code

    International Nuclear Information System (INIS)

    Khattab, K.

    2006-01-01

    The Miniature Neutron Source Reactor (MNSR) in Syria has five inner irradiation sites in the annulus Beryllium reflectors to analyze the unknown samples using the Neutron Activation Analysis technique and to produce medium and short half life isotopes. The fast neutron flux spectrum has a special importance in the MNSR reactor physics where this spectrum is required to measure the fast neutron flux in the MNSR inner irradiation sites. Hence, calculation of the fast neutron flux spectrum in the MNSR inner irradiation site is conducted in this work using the WIMSD4 code. The energy range is divided in the WIMSD4 to 69 energy groups. The first six energy groups represent the fast neutron ranging from 0.5 to 10 MeV. To calculate the fast neutron flux spectrum in the MNSR inner irradiation site using the WIMSD4 code, the MNSR is modeled as a super unit cell. This cell consists of three regions which are: the homogenized core, annulus Beryllium, and water. The fast neutron spectrum is calculated also using the U 235 fission neutron spectrum approximation. The U 235 fission neutron spectrum agrees very good with the WIMSD4 results when neutron energy exceeds 1 MeV, but it fails when the neutron energy ranges from 0.5 to 1 MeV. The WIMSD4 code is used as well to calculate the microscopic fission cross sections for the U 238 using six energy groups where a unit cell of U 238 is used since the U 238 is usually used to measure the fast neutron flux in the reactor. The macroscopic fission cross sections for the U 238 are calculated first then the microscopic fission cross sections are calculated knowing the U 238 atomic density. (Author)

  15. International fusion materials irradiation facility and neutronic calculations for its test modules

    International Nuclear Information System (INIS)

    Sokcic-Kostic, M.

    1997-01-01

    The International Fusion Material Irradiation Facility (IFMIF) is a projected high intensity neutron source for material testing. Neutron transport calculations for the IFMIF project are performed for variety of here explained reasons. The results of MCNP neutronic calculations for IFMIF test modules with NaK and He cooled high flux test cells are presented in this paper. (author). 3 refs., 2 figs., 3 tabs

  16. Assessment of the requirements for placing and maintaining Savannah River Site spent fuel storage basins under International Atomic Energy Agency safeguards

    International Nuclear Information System (INIS)

    Amacker, O.P. Jr.; Curtis, M.M.; Delegard, C.H.; Hsue, S.T.; Whitesel, R.N.

    1997-03-01

    The United States is considering the offer of irradiated research reactor spent fuel (RRSF) for international safeguards applied by the International Atomic Energy Agency (IAEA). The offer would be to add one or more spent fuel storage basins to the list of facilities eligible for IAEA safeguards. The fuel to be safeguarded would be stored in basins on the Savannah River Site (SRS). This RRSF potentially can include returns of Material Test Reactor (MTR) VAX fuel from Argentina, Brazil, and Chile (ABC); returns from other foreign research reactors; and fuel from domestic research reactors. Basins on the SRS being considered for this fuel storage are the Receiving Basin for Offsite Fuel (RBOF) and the L-Area Disassembly Basin (L-Basin). A working group of SRS, U.S. Department of Energy International Safeguards Division (NN-44), and National Laboratory personnel with experience in IAEA safeguards was convened to consider the requirements for applying the safeguards to this material. The working group projected the safeguards requirements and described alternatives

  17. Internal irradiation with radon daughters in some Bulgarian polymetal mines over the period 1962-1993

    International Nuclear Information System (INIS)

    Presiyanov, D.; Dimotrov, M.

    1993-01-01

    The results of radiation monitoring of the working environment in the Bulgarian metal mines are evaluated. The irradiation levels in the Burgas Copper Mines and their variations over the years have been estimated. A radiological characteristic of the working environment is provided together with a risk assessment for workers in different mines. A retrospective risk assessment is attempted for mines where increased radon 222 levels have been detected recently. The organization of radiometric monitoring and measures to limit the risk of internal irradiation are discussed. (author)

  18. Combination Processes in Food Irradiation. Proceedings of an International Symposium on Combination Processes in Food Irradiation

    International Nuclear Information System (INIS)

    1981-01-01

    Processes in Food Irradiation was held by the IAEA and FAO at the Bandaranaike Memorial International Conference Hall in Colombo on 24-28 November 1980, and the present volume contains the proceedings. One of the most effective means demonstrated of increasing the efficacy of irradiation in the control of food spoilage is the combination of a low irradiation dose with a mild heat treatment. Promising results were reported for the shelf-life extension of mangoes and papayas, and the disinfestation of dried dates. Commercial application of the heat-irradiation treatment for some fruits is expected to follow soon. The Symposium covered other topics, such as the mechanisms of sensitization of microorganisms by physical and chemical agents, improvement of the microbiological quality of foods by combination processes, and the aspects of the wholesomeness and legislation of the food irradiation process. A key issue in the general discussion was the recommendation on the acceptability of food irradiated up to an overall average dose of 10 kGy. This important recommendation had been achieved at a recently convened Joint FAO/IAEA/WHO Expert Committee on the Wholesomeness of Irradiated Foods (27 October — 3 November 1980, Geneva). The breakthrough on the toxicological acceptability constitutes a firm basis for going ahead speedily with the development of practical applications of food irradiation, which should take its rightful place among other food preservation methods in helping to provide more and better food to a world in need. The sponsoring organizations hope that the publication of these proceedings will encourage further research and development of food irradiation to the benefit of mankind

  19. Combination Processes in Food Irradiation. Proceedings of an International Symposium on Combination Processes in Food Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1981-09-15

    Processes in Food Irradiation was held by the IAEA and FAO at the Bandaranaike Memorial International Conference Hall in Colombo on 24-28 November 1980, and the present volume contains the proceedings. One of the most effective means demonstrated of increasing the efficacy of irradiation in the control of food spoilage is the combination of a low irradiation dose with a mild heat treatment. Promising results were reported for the shelf-life extension of mangoes and papayas, and the disinfestation of dried dates. Commercial application of the heat-irradiation treatment for some fruits is expected to follow soon. The Symposium covered other topics, such as the mechanisms of sensitization of microorganisms by physical and chemical agents, improvement of the microbiological quality of foods by combination processes, and the aspects of the wholesomeness and legislation of the food irradiation process. A key issue in the general discussion was the recommendation on the acceptability of food irradiated up to an overall average dose of 10 kGy. This important recommendation had been achieved at a recently convened Joint FAO/IAEA/WHO Expert Committee on the Wholesomeness of Irradiated Foods (27 October - 3 November 1980, Geneva). The breakthrough on the toxicological acceptability constitutes a firm basis for going ahead speedily with the development of practical applications of food irradiation, which should take its rightful place among other food preservation methods in helping to provide more and better food to a world in need. The sponsoring organizations hope that the publication of these proceedings will encourage further research and development of food irradiation to the benefit of mankind.

  20. High doses of ionizing radiation on bone repair: is there effect outside the irradiated site?

    Science.gov (United States)

    Rocha, Flaviana Soares; Dias, Pâmella Coelho; Limirio, Pedro Henrique Justino Oliveira; Lara, Vitor Carvalho; Batista, Jonas Dantas; Dechichi, Paula

    2017-03-01

    Local ionizing radiation causes damage to bone metabolism, it reduces blood supply and cellularity over time. Recent studies indicate that radiation promotes biological response outside the treatment field. The aim of this study was to investigate the effects of ionizing radiation on bone repair outside the irradiated field. Ten healthy male Wistar rats were used; and five animals were submitted to radiotherapy on the left femur. After 4 weeks, in all animals were created bone defects in the right and left femurs. Seven days after surgery, animals were euthanized. The femurs were removed and randomly divided into 3 groups (n=5): Control (C) (right femur of the non-irradiated animals); Local ionizing radiation (IR) (left femur of the irradiated animals); Contralateral ionizing radiation (CIR) (right femur of the irradiated animals). The femurs were processed and embedded in paraffin; and bone histologic sections were evaluated to quantify the bone neoformation. Histomorphometric analysis showed that there was no significant difference between groups C (24.6±7.04) and CIR (25.3±4.31); and IR group not showed bone neoformation. The results suggest that ionizing radiation affects bone repair, but does not interfere in bone repair distant from the primary irradiated site. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Food Irradiation Newsletter. V.13, no. 1

    International Nuclear Information System (INIS)

    1989-03-01

    The International Conference on the Acceptance, Control of, and Trade in Irradiated Food, jointly sponsored by FAO, IAEA, WHO and ITC-UNCTAD/GATT, Geneva, Switzerland, December 1988, recognized that (1) food irradiation has the potential to reduce the incidence of foodborne diseases; (2) food irradiation can reduce post-harvest food losses and make available a larger quantity and a wider variety of foodstuffs for consumers - It can also be an effective quarantine treatment for certain food and thus contribute to international trade; (3) international trade in irradiated foods would be facilitated by harmonization of national procedures based on internationally recognized standards for the control of food irradiation. The ''International Document on Food Irradiation'' adopted by consensus at the Conference is included in this issue, which also contains excerpts of the 5th Annual Meeting of the International Consultative Group on Food Irradiation (ICGFI), convened in Vienna, September 1988, and reports of two co-ordinated meetings, the second Research Co-ordination Meeting on the Use of Irradiation as a Quarantine Treatment of Food and Agricultural Commodities, and the Second Co-ordination Meeting on Food Irradiation Programme for Developing Countries in Middle East and Europe. 3 tabs

  2. Food irradiation: fiction and reality

    International Nuclear Information System (INIS)

    1991-01-01

    The International Consultative Group on Food Irradiation (IGCFI), sponsored by World Health Organization (WHO), Food and Agriculture Organization (FAO) and the International Atomic Energy Agency (IAEA), with the intention to provide to governments, especially those of developing countries, scientifically correct information about food irradiation, decided to organize a file and questions of general public interest. The document is composed by descriptive files related with the actual situation and future prospective, technical and scientific terms, food irradiation and the radioactivity, chemical transformations in irradiated food, genetic studies, microbiological safety of irradiated food, irradiation and harmlessness, irradiation and additives, packing, irradiation facilities control, process control, irradiation costs and benefits as well as consumers reaction

  3. Treatment of recurrences in head and neck cancers occurring in irradiated site

    International Nuclear Information System (INIS)

    Pernot, M.

    1994-01-01

    We'll consider as recurrences the elevate relapses occurring at least six months after the first treatment end. The recurrences however frequent it is, is bad codified and everybody does what he can in the presence of a relapse. The number of retreated lesions should be in inverse proportion of the efficiency of the initial treatment. The surgery made large progresses during these last 15 years. The external radiotherapy is seldom a very good treatment indication of head and neck cancer recurrences in previously irradiated site. Iridium 192 wires may be used as implantations with low dose rate. For the cavity proper of mouth, we have counted 159 relapses at the level of the sole primary tumour. The tonsil neoplasms are often treated by a sole external irradiation or in association with curietherapy. For a larynx neoplasm the ideal starting treatment is that one which allows to cure the tumour while protecting the speaking and the swallowing. 83 refs

  4. Study about internal friction in deformed - and irradiated pure titanium

    International Nuclear Information System (INIS)

    Miyada, L.T.

    1979-01-01

    Internal friction and modulus are measured in pure Ti at low temperature using an inverted torsion-pendulum at about 1 Hz. The presence of four relaxation peaks P' sub(d)(-140 0 C), P sub(d)(-101 0 C), P' sub(α)(-75 0 C) and P sub(α)(-50 0 C) has been found, and effects of plastic deformation, heat treatment and neutron irradiation on these peaks are investigated in detail. Activation energies and frequency factors of P sub(d) and Pα peaks are consistent with the data in higher frequency range reproted by other workers. The P sub(d) and P' sub(d) peaks grow after deformation and tend to decay after annealing at high temperatures or after neutron irradiation. Both peaks are resonably interpreted in terms of dislocation relaxation mechanisms (Bordoni type) arising from thermally activated motion of dislocations in different slip planes of h.c.f. structure. Peierls stress of dislocations giving rise to each peak have calculated based on Seeger's theory, and found to be consistent with that of f.c.c. metals. On the other hand, P sub(α) and P' sub(α) peaks grow significantly at the expense of P sub(d) and P' sub(d) peaks after neutron irradiation in deformed samples. The behaviour of these peaks as a function of irradiation dose and annealing temperatures strongly indicated that they are due to relaxations resulting from dislocations-point defects interactions (Hasiguti type). It is tentatively suggested that P sub(α) and P' sub(α) peaks are related with interactions of dislocations with divacancies and single vacancies, respectively. Application of Schiller's model showed a consistent result with regard to the P' sub(α) peak experimentally observed. (Author) [pt

  5. Measurement of the fast neutron flux in the MNSR inner irradiation site

    International Nuclear Information System (INIS)

    Khattab, K.

    2007-01-01

    The WIMSD4 code was used to calculate the fast neutron flux spectrum and the fast neutron fission cross sections for 238 U, using six energy groups ranging from 0.5 to 10 MeV. These results, with the measured radioactivities of the 140 Ba, 131 I, 103 Ru, 95 Zr and 97 Zr fission products emerging from the fission of the 238 U foil covered with a cadmium filter, were used to measure the fast neutron flux in the Syrian MNSR inner irradiation site. (author)

  6. Irradiated stainless steel material constitutive model for use in the performance evaluation of PWR pressure vessel internals

    Energy Technology Data Exchange (ETDEWEB)

    Rashid, J.Y.; Dunham, R.S. [ANATECH (United States); Demma, A. [Electric Power Research Institute - EPRI (United States)

    2011-07-01

    Demonstration of component functionality requires analytical simulations of reactor internals behavior. Towards that aim, EPRI has undertaken the development of irradiated material constitutive model and damage criteria for use in global and local finite-element based functionality analysis methodology. The constitutive behavioral regimes of irradiated stainless steel types 316 and 304 materials included in the model consist of: elastic-plastic material response considering irradiation hardening of the stress-strain curve, irradiation creep, stress relaxation, and void swelling. IASCC and degradation of ductility with irradiation are the primary damage mechanisms considered in the model. The material behavior model development consists of two parts: the first part is a user-material subroutine that can interface with a general-purpose finite element computer program to adapt it to the special-purpose of functionality analysis of reactor internals. The second part is a user utility in the form of Excel Spread sheets that permit users to extract a given property, e.g. the elastic-plastic stress-strain curve, creep curve, or void-swelling curve, as function of the relevant independent variables. The development of the model takes full advantage of the significant work that has been undertaken within EPRI's Material Reliability Program (MRP) to improve the knowledge of the material properties of irradiated stainless steels. Data from EPRI's MRP database have been utilized to develop equations that characterize the yield strength, ultimate tensile strength, uniform elongation, total elongation, reduction in area, void swelling and irradiation creep of stainless steels in a PWR environment. It is noted that, while the development of the model's equations has been statistically faithful to the material database, approximations were introduced in the model to ensure appropriate conservatism in the model's application consistently with accepted

  7. Quality assurance for the IAEA International Database on Irradiated Nuclear Graphite Properties

    International Nuclear Information System (INIS)

    Wickham, A.J.; Humbert, D.

    2006-06-01

    Consideration has been given to the process of Quality Assurance applied to data entered into current versions of the IAEA International Database on Irradiated Nuclear Graphite Properties. Originally conceived simply as a means of collecting and preserving data on irradiation experiments and reactor operation, the data are increasingly being utilised for the preparation of safety arguments and in the design of new graphites for forthcoming generations of graphite-moderated plant. Under these circumstances, regulatory agencies require assurances that the data are of appropriate accuracy and correctly transcribed, that obvious errors in the original documentation are either highlighted or corrected, etc., before they are prepared to accept analyses built upon these data. The processes employed in the data transcription are described in this document, and proposals are made for the categorisation of data and for error reporting by Database users. (author)

  8. Food problems and food irradiation, recent trend

    International Nuclear Information System (INIS)

    1990-01-01

    Food irradiation is to contribute to the stable security of foodstuffs which is the fundamental condition of human survival by improving the preservation of foodstuffs and food sanitation utilizing the biological effect due to irradiation. The research and development have been carried out internationally since 1950s, but after the safety declaration of irradiated foods in 1980 by the international organ concerned, the permission and practical use for foods in various foreign countries, the technology transfer to developing countries and so on have been advanced. At present, food irradiation is permitted in 38 countries, and the practical irradiation is carried out in 24 countries. In Japan, the irradiation of potatoes to prevent germination was permitted in 1972, and the practical irradiation on potatoes of yearly 15,000 t is carried out. In the near future, irradiated foods will appear in international foodstuff market, and Japan which imports foodstuffs must cope with them. Foodstuffs and the safety, food irradiation, the soundness of irradiated foods, food irradiation in various foreign countries and Japan, the trend of international organs and the criticism of food irradiation are reported. (K.I.)

  9. Neurofibrosarcoma at irradiation site in a patient with neurofibromatosis and Wilms' tumor

    International Nuclear Information System (INIS)

    Chu, J.Y.; O'Connor, D.M.; Danis, R.K.

    1981-01-01

    A female patient with neurofibromatosis had nephrectomy performed because of Wilms' tumor at the age of four and a half. She received radiation therapy and chemotherapy (actinomycin D) after surgery. She had subsequent local recurrence and lung metastasis, which were surgically excised and successfully treated with additional radiation therapy and chemotherapy (vincristine and actinomycin D). However, neurofibrosarcoma at the irradiation site developed seven years after radiation therapy. She died 22 months later because of recurrence and metastasis of neurofibrosarcoma. Radiation therapy's association with malignant transformation of neurofibroma is discussed

  10. Mitigation of radiation nephropathy after internal α-particle irradiation of kidneys

    International Nuclear Information System (INIS)

    Jaggi, Jaspreet Singh; Seshan, Surya V.; McDevitt, Michael R.; Sgouros, George; Hyjek, Elizabeth; Scheinberg, David A.

    2006-01-01

    Purpose: Internal irradiation of kidneys as a consequence of radioimmunotherapy, radiation accidents, or nuclear terrorism can result in radiation nephropathy. We attempted to modify pharmacologically, the functional and morphologic changes in mouse kidneys after injection with the actinium ( 225 Ac) nanogenerator, an in vivo generator of α- and β-particle emitting elements. Methods and Materials: The animals were injected with 0.35 μCi of the 225 Ac nanogenerator, which delivers a dose of 27.6 Gy to the kidneys. Then, they were randomized to receive captopril (angiotensin-converting enzyme inhibitor), L-158,809 (angiotensin II receptor-1 blocker), spironolactone (aldosterone receptor antagonist), or a placebo. Results: Forty weeks after the 225 Ac injection, the placebo-control mice showed a significant increase in blood urea nitrogen (BUN) (87.6 ± 6.9 mg/dL), dilated Bowman spaces, and tubulolysis with basement membrane thickening. Captopril treatment accentuated the functional (BUN 119.0 ± 4.0 mg/dL; p <0.01 vs. placebo controls) and histopathologic damage. In contrast, L-158,809 offered moderate protection (BUN 66.6 ± 3.9 mg/dL; p = 0.02 vs. placebo controls). Spironolactone treatment, however, significantly prevented the development of histopathologic and functional changes (BUN 31.2 ± 2.5 mg/dL; p <0.001 vs. placebo controls). Conclusions: Low-dose spironolactone and, to a lesser extent, angiotensin receptor-1 blockade can offer renal protection in a mouse model of internal α-particle irradiation

  11. IFMIF [International Fusion Materials Irradiation Facility], an accelerator-based neutron source for fusion components irradiation testing: Materials testing capabilities

    International Nuclear Information System (INIS)

    Mann, F.M.

    1988-08-01

    The International Fusion Materials Irradiation Facility (IFMIF) is proposed as an advanced accelerator-based neutron source for high-flux irradiation testing of large-sized fusion reactor components. The facility would require only small extensions to existing accelerator and target technology originally developed for the Fusion Materials Irradiation Test (FMIT) facility. At the extended facility, neutrons would be produced by a 0.1-A beam of 35-MeV deuterons incident upon a liquid lithium target. The volume available for high-flux (>10/sup 15/ n/cm/sup 2/-s) testing in IFMITF would be over a liter, a factor of about three larger than in the FMIT facility. This is because the effective beam current of 35-MeV deuterons on target can be increased by a factor of ten to 1A or more. Such an increase can be accomplished by funneling beams of deuterium ions from the radio-frequency quadruple into a linear accelerator and by taking advantage of recent developments in accelerator technology. Multiple beams and large total current allow great variety in available testing. For example, multiple simultaneous experiments, and great flexibility in tailoring spatial distributions of flux and spectra can be achieved. 5 refs., 2 figs., 1 tab

  12. Revision of the recommended international general standard for irradiated foods and of the recommended international code of practice for the operation of radiation facilities used for the treatment of foods

    International Nuclear Information System (INIS)

    1981-11-01

    In view of the findings and statements of the Joint FAO/IAEA/WHO Expert Committee on the Wholesomeness of Irradiated Food, convened in Geneva from 27 October to 3 November 1980, a Consultation Group, convened in Geneva from 1 to 3 July 1981 suggested the revision of the Recommended International General Standard for Irradiated Foods and of the Recommended International Code of Practice for the Operation of Radiation Facilities. The proposed changes are given and justified and the revised wording of the documents presented

  13. Performance of a radioactive waste internment site

    International Nuclear Information System (INIS)

    Bernhardt, D.E.; Owen, D.H.; Mishub, R.J.; Prewett, S.V.; Cole, L.W.

    1990-01-01

    Aerojet disposed of 30,000 cubic meters of uranium and thorium wastes in an engineered 12,000 square meter (3 acre) internment site in Tennessee. The operation, performed under a State of Tennessee source material license, is based on termination of the license with the material remaining in place, and the option of future commercial use of the site. The closure plan included a long-term monitoring program. Yearly monitoring of the site has verified performance within the design criteria. Full-time construction monitored by a licensed engineer and extensive testing of materials ensured construction of the site according to or better than the specifications. Surface subsidence of the site has averaged about 2.2 cm with a range of 0 to 4.3 cm at 11 settlement markers after 4 years. The anticipated settlement, based on design parameters, was between 15 and 25 cm. The present anticipated settlement is 8 to 15 cm, based on the as-built parameters, and the long-term monitoring results. Slope stability analysis indicates the stability has improved with time due to consolidation of materials and reduced groundwater activity as a result of site construction. There has been no need for corrective action maintenance due to erosion, sluffing of slopes, or subsidence. Groundwater monitoring indicates the materials have been isolated, and there have also been no indications of springs or leakage from the site. 9 refs., 2 figs., 3 tabs

  14. Accelerator conceptual design of the international fusion materials irradiation facility

    International Nuclear Information System (INIS)

    Sugimoto, M.; Kinsho, M.; Teplyakov, V.; Berwald, D.; Bruhwiler, D.; Peakock, M.; Rathke, J.; Deitinghoff, H.; Klein, H.; Pozimski, Y.; Volk, K.; Miyahara, A.; Olivier, M.; Piechowiak, E.; Tanabe, Y.

    1998-01-01

    The accelerator system of the international fusion materials irradiation facility (IFMIF) provides the 250-mA, 40-MeV continuous-wave deuteron beam at one of the two lithium target stations. It consists of two identical linear accelerator modules, each of which independently delivers a 125-mA beam to the common footprint of 20 cm x 5 cm at the target surface. The accelerator module consists of an ion injector, a 175 MHz RFQ and eight DTL tanks, and rf power supply system. The requirements for the accelerator system and the design concept are described. The interface issues and operational considerations to attain the proposed availability are also discussed. (orig.)

  15. Peculiarities of intestine injuries in case of internal and external irradiation: a morphometric study

    International Nuclear Information System (INIS)

    Ponomareva, T.V.

    1988-01-01

    It is shown that sterological cell parameters and indexes of their interaction may serve as an important characteristic of tissue postirradiation recovery quality permitting to give a precise quantitative characteristic of cell differentiation and dedifferentiation. It is established that enterocyte maturation is sharphy broken under irradiation. Population delamination into sublines differing in cell size takes place. The number of these cells depends on radiation doses. The most labile cell componenet is cell nucleoli. The cell differentiation breakage is more pronounced in case of internal irradiation (Ce 144 ) and in combined radiation effect. A degree of cell differentiation breakage depends on peroxidation level. The obtained data can be used in developing and evaluating radioprotective substances

  16. Influence of geometrical parameters of the VVER-1000 reactor construction elements to internals irradiation conditions

    Directory of Open Access Journals (Sweden)

    О. M. Pugach

    2015-07-01

    Full Text Available Investigations to determine the influences of geometrical parameters of the calculational VVER-1000 reactor model to the results of internal irradiation condition determination are carried out. It is shown that the values of appropriate sensitivity matrix elements are not dependent on a height coordinate for any core level, but there is their azimuthal dependence. Maximum possible relative biases of neutron fluence due to inexact knowledge of internal geometrical parameters are obtained for the baffle and the barrel.

  17. Ingestion of Nevada Test Site Fallout: Internal dose estimates

    International Nuclear Information System (INIS)

    Whicker, F.W.; Kirchner, T.B.; Anspaugh, L.R.

    1996-01-01

    This paper summarizes individual and collective dose estimates for the internal organs of hypothetical yet representative residents of selected communities that received measurable fallout from nuclear detonations at the Nevada Test Site. The doses, which resulted from ingestion of local and regional food products contaminated with over 20 radionuclides, were estimated with use of the PATHWAY food-chain-transport model to provide estimates of central tendency and uncertainty. The thyroid gland received much higher doses than other internal organs and tissues. In a avery few cases, infants might have received thyroid doses in excess of 1 Gy, depending on location, diet, and timing of fallout. 131 I was the primary thyroid dose contributor, and fresh milk was the main exposure pathway. With the exception of the thyroid, organ doses from the ingestion pathway were much smaller (<3%) than those from external gamma exposure to deposited fallout. Doses to residents living closest to the Nevada Test Site were contributed mainly by a few fallout events; doses to more distantly located people were generally smaller, but a greater number of events provided measurable contributions. The effectiveness of different fallout events in producing internal organ doses through ingestion varied dramatically with seasonal timing of the test, with maximum dose per unit fallout occurring for early summer depositions when milk cows were on pasture and fresh, local vegetables were used. Within specific communities, internal doses differed by age, sex, and lifestyle. Collective internal dose estimates for specific geographic areas are provided

  18. Staged deployment of the International Fusion Materials Irradiation Facility

    International Nuclear Information System (INIS)

    Takeuchi, H.; Sugimoto, M.; Nakamura, H.

    2001-01-01

    The International Fusion Materials Irradiation Facility (IFMIF) employs an accelerator based D-Li intense neutron source as defined in the 1995-96 Conceptual Design Activity (CDA) study. In 1999, IEA mandated a review of the CDA IFMIF design for cost reduction without change to its original mission. This objective was accomplished by eliminating the previously assumed possibility of potential upgrade of IFMIF beyond the user requirements. The total estimated cost was reduced from $797.2 M to $487.8 M. An option of deployment in 3 stages was also examined to reduce the initial investment and annual expenditures during construction. In this scenario, full performance is achieved gradually with each interim stage as follows. 1st Stage: 20% operation for material selection for ITER breeding blanket, 2nd Stage: 50% operation to demonstrate materials performance of a reference alloy for DEMO, 3rd Stage: full performance operation ( 2MW/m 2 at 500cm 3 ) to obtain engineering data for potential DEMO materials under irradiation up to 100-200 dpa. In summary, the new, reduced cost IFMIF design and staged deployment still satisfies the original mission. The estimated cost of the 1st Stage facility is only $303.6 M making it financially much more attractive. Currently, IFMIF Key Element Technology Phase (KEP) is underway to reduce the key technology risk factors. (author)

  19. Use of studies with laboratory animals to assess the potential early health effects of combined internal alpha and beta irradiation

    International Nuclear Information System (INIS)

    Scott, B.R.; Hahn, F.F.; Guilmette, R.A.; Muggenburg, B.A.; Snipes, M.B.; Boecker, B.B.; McClellan, R.O.

    1986-01-01

    The potential health impacts of radionuclides released in nuclear accidents are of major concern to the public and to regulatory and other governmental agencies. One mode of potential exposure is by inhalation of airborne radionuclides, which could lead to combined internal irradiation by high (alpha) and low (beta) linear energy transfer (LET) radiations. Epidemiological data for health effects of human inhalation exposure are too limited to derive reliable estimates of risks of potential health effects. However, results of studies in which beagle dogs were exposed by inhalation to insoluble radioactive aerosols can be used to estimate expected effects in humans. Data for mortality from radiation pneumonitis and pulmonary fibrosis caused by internal irradiation of dog lungs by alpha or beta radiations are used to derive the relative biological effectiveness (RBE) of alpha irradiation compared to beta irradiation; predict the expected combined effects of alpha and beta irradiation of dog lungs; and extrapolate the results to humans. The extrapolation to humans assumed that, for similar ages at exposure, dog and human lungs have similar sensitivities to lung irradiation. Results of theoretical calculations related to mortality from early effects indicated that the synergistic effects of high- and low-LET radiations should depend on the percentages of the total dose contributed by high- and low-LET radiations, and for very low or very high doses, synergistic effects should be negligible. 23 refs., 8 figs

  20. The future Jules Horowitz material test reactor: A major European research infrastructure for sustaining the international irradiation capacity

    International Nuclear Information System (INIS)

    Parrat, D.; Bignan, G.; Chauvin, J.; Gonnier, C.

    2011-01-01

    Multipurpose experimental reactors are now key infrastructures, in complement of prediction capabilities gained thanks to progresses in the modelling, for supporting nuclear energy in terms of safety, ageing management, innovation capacity, economical performances and training. However the European situation in this field is characterized by ageing large infrastructures, which could face to operational issues in the coming years and could jeopardize the knowledge acquisition and the nuclear product qualification. Moreover some specific supplies related to the public demand could be strongly affected (e.g. radiopharmaceutical targets). To avoid a lack in the experimental capacity offer at the European level, the CEA has launched the Jules Horowitz material test reactor (JHR) international program, in the frame of a Consortium gathering EDF (FR), AREVA (FR), the European Commission (EU), SCK.CEN (BE), VTT (FI), CIEMAT (SP), VATTENFALL (SE), UJV (CZ), JAEA (JP) and the DAE (IN). The JHR will be a 100 MW tank pool reactor and will have several experimental locations either inside the reactor core or outside the reactor tank in a reflector constituted by beryllium blocks. Excavation works started mid-2007 on the CEA Cadarache site in the southeast of France. After the construction permit delivery gained in September 2007, building construction began at the beginning of 2009. Reactor start-up is scheduled in 2016. The JHR is designed to offer up-to-date irradiation experimental capabilities for studying nuclear material and fuel behaviour under irradiation in a modern safety frame, mainly due to: 1) High values of fast and thermal neutron fluxes in the core and high thermal neutron flux in the reflector (producing typically twice more material damages per year than available today in European MTRs); 2) A large variety of experimental devices capable to reproduce environment conditions of mainly light water reactors (LWRs) and sodium fast reactors; 3) Several equipment

  1. Proliferating Cell Nuclear Antigen-dependent Rapid Recruitment of Cdt1 and CRL4Cdt2 at DNA-damaged Sites after UV Irradiation in HeLa Cells*

    Science.gov (United States)

    Ishii, Takashi; Shiomi, Yasushi; Takami, Toshihiro; Murakami, Yusuke; Ohnishi, Naho; Nishitani, Hideo

    2010-01-01

    The licensing factor Cdt1 is degraded by CRL4Cdt2 ubiquitin ligase dependent on proliferating cell nuclear antigen (PCNA) during S phase and when DNA damage is induced in G1 phase. Association of both Cdt2 and PCNA with chromatin was observed in S phase and after UV irradiation. Here we used a micropore UV irradiation assay to examine Cdt2 accumulation at cyclobutane pyrimidine dimer-containing DNA-damaged sites in the process of Cdt1 degradation in HeLa cells. Cdt2, present in the nucleus throughout the cell cycle, accumulated rapidly at damaged DNA sites during G1 phase. The recruitment of Cdt2 is dependent on prior PCNA chromatin binding because Cdt2 association was prevented when PCNA was silenced. Cdt1 was also recruited to damaged sites soon after UV irradiation through its PIP-box. As Cdt1 was degraded, the Cdt2 signal at damaged sites was reduced, but PCNA, cyclobutane pyrimidine dimer, and XPA (xeroderma pigmentosum, complementation group A) signals remained at the same levels. These findings suggest that Cdt1 degradation following UV irradiation occurs rapidly at damaged sites due to PCNA chromatin loading and the recruitment of Cdt1 and CRL4Cdt2, before DNA damage repair is completed. PMID:20929861

  2. Accelerator conceptual design of the international fusion materials irradiation facility

    Energy Technology Data Exchange (ETDEWEB)

    Sugimoto, M.; Kinsho, M. [Japan Atomic Energy Res. Inst., Tokai, Ibaraki (Japan). Intense Neutron Source Lab.; Jameson, R.A.; Blind, B. [Los Alamos National Lab., NM (United States); Teplyakov, V. [Institute for High Energy Physics, Moscow (Russian Federation); Berwald, D.; Bruhwiler, D.; Peakock, M.; Rathke, J. [Northrop Grumman Corp., Bethpage, NY (United States); Deitinghoff, H.; Klein, H.; Pozimski, Y.; Volk, K. [Johann Wolfgang Goethe Univ., Frankfurt (Germany). Inst. fur Angewandte Phys.; Ferdinand, R.; Lagniel, J.-M. [CEA Saclay LNS, Gif-sur-Yvette (France); Miyahara, A. [Teikyo Univ., Tokyo (Japan); Olivier, M. [CEA DSM, Saclay, Gif-sur-Yvette (France); Piechowiak, E. [Northrop Grumman Corp., Baltimore, MD (United States); Tanabe, Y. [Toshiba Corp., Tsurumi-ku, Yokohama (Japan)

    1998-10-01

    The accelerator system of the international fusion materials irradiation facility (IFMIF) provides the 250-mA, 40-MeV continuous-wave deuteron beam at one of the two lithium target stations. It consists of two identical linear accelerator modules, each of which independently delivers a 125-mA beam to the common footprint of 20 cm x 5 cm at the target surface. The accelerator module consists of an ion injector, a 175 MHz RFQ and eight DTL tanks, and rf power supply system. The requirements for the accelerator system and the design concept are described. The interface issues and operational considerations to attain the proposed availability are also discussed. (orig.) 8 refs.

  3. Food irradiation 2009

    International Nuclear Information System (INIS)

    Narvaiz, Patricia

    2009-01-01

    Food irradiation principles; its main applications, advantages and limitations; wholesomeness, present activities at Ezeiza Atomic Centre; research coordinated by the International Atomic Energy Agency; capacity building; and some aspects on national and international regulations, standards and commercialization are briefly described. At present 56 countries authorize the consumption of varied irradiated foods; trade is performed in 32 countries, with about 200 irradiation facilities. Argentina pioneered nuclear energy knowledge and applications in Latin America, food irradiation included. A steady growth of food industrial volumes treated in two gamma facilities can be observed. Food industry and producers show interest towards new facilities construction. However, a 15 years standstill in incorporating new approvals in the Argentine Alimentary Code, in spite of consecutive request performed either by CNEA or some food industries restricts, a wider industrial implementation, which constitute a drawback to future regional commercialization in areas such as MERCOSUR, where Brazil since 2000 freely authorize food irradiation. Besides, important chances in international trade with developed countries will be missed, like the high fresh fruits and vegetables requirements United States has in counter-season, leading to convenient sale prices. The Argentine food irradiation facilities have been designed and built in the country. Argentina produces Cobalt-60. These capacities, unusual in the world and particularly in Latin America, should be protected and enhanced. Being the irradiation facilities scarce and concentrated nearby Buenos Aires city, the possibilities of commercial application and even research and development are strongly limited for most of the country regions. (author) [es

  4. UNDERWATER ANALYSIS OF IRRADIATED REACTOR SLUGS FOR Co-60 AND OTHER RADIONUCLIDES AT THE SAVANNAH RIVER SITE

    International Nuclear Information System (INIS)

    CASELLA, VITO

    2004-01-01

    Co-60 was produced in the Savannah River Site (SRS) reactors in the 1970s, and the irradiated cobalt reactor slugs were stored in a reactor basin at SRS. Since the activity rates of these slugs were not accurately known, assaying was required. A sodium iodide gamma detector was placed above a specially designed air collimator assembly, so that the slug was eight to nine feet from the detector and was shielded by the basin water. Also, 18 curium sampler slugs, used to produce Cm-244 from Pu-239, were to be disposed of with the cobalt slugs. The curium slugs were also analyzed with a High Purity Germanium (HPGE) detector in an attempt to identify any additional radionuclides produced from the irradiation. Co-60 concentrations were determined for reactor disassembly basin cobalt slugs and the 18 curium sampler slugs. The total Co-60 activity of all of the assayed slugs in this work summed to 31,783 curies on 9/15/03. From the Co-60 concentrations of the curium sampler slugs, the irradiation flux was determined for the known irradiation time. The amounts of Pu-238,-239,-240,-241,-242; Am-241,-243; and Cm-242,-244 produced were then obtained based on the original amount of Pu-239 irradiated

  5. Complications related to conventional self-expandable metal stent insertion and internal irradiation stent insertion in patients with advanced esophageal carcinoma: an analysis of 32 cases

    International Nuclear Information System (INIS)

    Xu Xingwen; Di Haiting; Zhu Jun; Shi Jian

    2011-01-01

    Objective: To compare the occurrence of complications between conventional self-expandable metal stent and internal irradiation stent insertion in treating patients with advanced esophageal carcinomas. Methods: A total of 32 patients with advanced esophageal carcinoma were randomly divided into irradiation stent group (n=15) and conventional stent group (n=17). Internal irradiation stent loaded with 125 I seeds was employed in patients of irradiation stent group, while conventional self-expandable metal stent was used in patients of conventional stent group. After the treatment, clinical follow-up was regularly conducted. Postoperative complications such as fever, severe chest pain, cough, esophageal perforation, pneumonia, hemorrhage, stent migration and restenosis, etc. were observed. Results: No significant difference in the occurrence of fever, severe chest pain, esophageal perforation and hemorrhage existed between the two groups (P>0.05). The difference in the occurrence of long-term complications such as stent migration or restenosis between the two groups was out statistically significant (P>0.05). However, the restenosis in irradiation stent group occurred obviously much later than that in conventional stent group. Conclusion: For the treatment of advanced esophageal carcinomas, the insertion of internal irradiation esophageal stent is safe. It dose not increase the incidence of postoperative complications. Therefore, it is worth popularizing this technique in clinical practice. (authors)

  6. Literature study of the radiobiological parameters of Caesium-137 required for evaluating internal irradiation doses as a function of age

    International Nuclear Information System (INIS)

    Garnier, A.

    1968-01-01

    This document reassembles information published in scientific literature on radiobiological parameters of Cs-137, necessary for the estimate of the internal irradiation dose of man according to his age (during growth). The data are completed by a commented review of the mathematical models, proposed in order to value the irradiation doses from ingested cesium and the biological parameters. (author) [fr

  7. Internal hydriding in irradiated defected Zircaloy fuel rods: A review (LWBR Development Program)

    International Nuclear Information System (INIS)

    Clayton, J.C.

    1987-10-01

    Although not a problem in recent commercial power reactors, including the Shippingport Light Water Breeder Reactor, internal hydriding of Zircaloy cladding was a persistent cause of gross cladding failures during the 1960s. It occurred in the fuel rods of water-cooled nuclear power reactors that had a small cladding defect. This report summarizes the experimental findings, causes, mechanisms, and methods of minimizing internal hydriding in defected Zircaloy-clad fuel rods. Irradiation test data on the different types of defected fuel rods, intentionally fabricated defected and in-pile operationally defected rods, are compared. Significant factors affecting internal hydriding in defected Zircaloy-clad fuel rods (defect hole size, internal and external sources of hydrogen, Zircaloy cladding surface properties, nickel alloy contamination of Zircaloy, the effect of heat flux and fluence) are discussed. Pertinent in-pile and out-of-pile test results from Bettis and other laboratories are used as a data base in constructing a qualitative model which explains hydrogen generation and distribution in Zircaloy cladding of defected water-cooled reactor fuel rods. Techniques for minimizing internal hydride failures in Zircaloy-clad fuel rods are evaluated

  8. Nuclear data needs for neutron spectrum tailoring at International Fusion Materials Irradiation Facility (IFMIF)

    International Nuclear Information System (INIS)

    Sugimoto, Masayoshi

    2001-01-01

    International Fusion Materials Irradiation Facility (IFMIF) is a proposal of D-Li intense neutron source to cover all aspects of the fusion materials development in the framework of IEA collaboration. The new activity has been started to qualifying the important technical issues called Key Element technology Phase since 2000. Although the neutron spectrum can be adjusted by changing the incident beam energy, it is favorable to be carried out many irradiation tasks at the same time under the unique beam condition. For designing the tailored neutron spectrum, neutron nuclear data for the moderator-reflector materials up to 50 MeV are required. The data for estimating the induced radioactivity is also required to keep the radiation level low enough at maintenance time. The candidate materials and the required accuracy of nuclear data are summarized. (author)

  9. Nuclear data needs for neutron spectrum tailoring at International Fusion Materials Irradiation Facility (IFMIF)

    Energy Technology Data Exchange (ETDEWEB)

    Sugimoto, Masayoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2001-03-01

    International Fusion Materials Irradiation Facility (IFMIF) is a proposal of D-Li intense neutron source to cover all aspects of the fusion materials development in the framework of IEA collaboration. The new activity has been started to qualifying the important technical issues called Key Element technology Phase since 2000. Although the neutron spectrum can be adjusted by changing the incident beam energy, it is favorable to be carried out many irradiation tasks at the same time under the unique beam condition. For designing the tailored neutron spectrum, neutron nuclear data for the moderator-reflector materials up to 50 MeV are required. The data for estimating the induced radioactivity is also required to keep the radiation level low enough at maintenance time. The candidate materials and the required accuracy of nuclear data are summarized. (author)

  10. Effect of in vivo γ-irradiation on the binding of wheat germ agglutinin on lymphocyte plasma membranes

    International Nuclear Information System (INIS)

    Moullier, P.; Daveloose, D.; Dubos, M.; Leterrier, F.; Hoebeke, J.

    1986-01-01

    Using quantitative fluorimetry with fluoresceinated wheat germ agglutinin, we have been able to investigate in vivo gamma radiation-induced damage at the outer membrane level of rat splenic lymphocytes, namely damage to the glucosidic moieties of membrane glycoproteins and glycolipids. This paper demonstrates that below an irradiation level of 1 gray (Gy), removal of sialic acid is the major feature leading to new exposed specific binding sites for wheat germ agglutinin, since this lectin is specific for sialic acid and N-acetyl-D-glucosamine. Our studies also suggest that above 1 Gy of irradiation more internal damage occurs, since we observed a striking decrease in wheat germ agglutinin binding sites. (orig.)

  11. The irradiation induced creep of graphite under accelerated damage produced by boron doping

    International Nuclear Information System (INIS)

    Brocklehurst, J.E.

    1975-01-01

    The presence of boron enhances fast neutron irradiation damage in graphite by providing nucleation sites for interstitial loop formation. Doping with 11 B casues an increase in the irradiation induced macroscopic dimensional changes, which have been shown to result from an acceleration in the differential crystal growth rate for a given carbon atom displacement rate. Models of irradiation induced creep in graphite have centred around those in which creep is induced by internal stresses due to the anisotopic crystal growth, and those in which creep is activated by atomic displacements. A creep test on boron doped graphite has been performed in an attempt to establish which of these mechanisms is the determining factor. An isotropic nuclear graphite was doped to a 11 B concentration of 0.27 wt.%. The irradiation induced volume shrinkage rate at 750 0 C increased by a factor of 3 over that of the virgin graphite, in agreement with predictions from the earlier work, but the total creep strains were comparable in both doped and virgin samples. This observation supports the view that irradiation induced creep is dependent only on the carbon atom displacement rate and not on the internal stress level determined by the differential crystal growth rate. The implications of this result on the irradiation behaviour of graphite containing significant concentrations of boron are briefly discussed. (author)

  12. Simulation of gamma-ray irradiation of lettuce leaves in a 137Cs irradiator using MCNP

    International Nuclear Information System (INIS)

    Kim, Jongsoon; Moreira, Rosana G.; Braby, Leslie A.

    2010-01-01

    Ionizing radiation effectively reduces the number of common microbial pathogens in fresh produce. However, the efficacy of the process for pathogens internalized into produce tissue is unknown. The objective of this study was to understand gamma irradiation of lettuce leaf structure exposed in a 137 Cs irradiator using MCNP. The simulated 137 Cs irradiator is a self-shielded device, and its geometry and sources are described in the MCNP input file. When the irradiation chamber is filled with water, lower doses are found at the center of the irradiation volume and the dose uniformity ratio (maximum dose/minimum dose) is 1.76. For randomly oriented rectangular lettuce leaf segments in the irradiation chamber, the dose uniformity ratio is 1.25. It shows that dose uniformity in the Cs irradiator is strongly dependent of the density of the sample. To understand dose distribution inside the leaf, we divided a lettuce leaf into a low density (flat) region (0.72 g/cm 3 ) and high density (rib) region (0.86 g/cm 3 ). Calculated doses to the rib are 61% higher than doses to the flat region of the leaf. This indicates that internalized microorganisms can be inactivated more easily than organisms on the surface. This study shows that irradiation can effectively reduce viable microorganism internalized in lettuce. (author)

  13. Results from the CDE phase activity on neutron dosimetry for the international fusion materials irradiation facility test cell

    CERN Document Server

    Esposito, B; Maruccia, G; Petrizzi, L; Bignon, G; Blandin, C; Chauffriat, S; Lebrun, A; Recroix, H; Trapp, J P; Kaschuck, Y

    2000-01-01

    The international fusion materials irradiation facility (IFMIF) project deals with the study of an accelerator-based, deuterium-lithium source, producing high energy neutrons at sufficient intensity and irradiation volume to test samples of candidate materials for fusion energy reactors. IFMIF would also provide calibration and validation of data from fission reactor and other accelerator based irradiation tests. This paper describes the activity on neutron/gamma dosimetry (necessary for the characterization of the specimens' irradiation) performed in the frame of the IFMIF conceptual design evaluation (CDE) neutronics tasks. During the previous phase (conceptual design activity (CDA)) the multifoil activation method was proposed for the measurement of the neutron fluence and spectrum and a set of suitable foils was defined. The cross section variances and covariances of this set of foils have now been used for tests on the sensitivity of the IFMIF neutron spectrum determination to cross section uncertainties...

  14. Food irradiation makes progress

    International Nuclear Information System (INIS)

    Kooij, J. van

    1984-01-01

    In the past fifteen years, food irradiation processing policies and programmes have been developed both by a number of individual countries, and through projects supported by FAO, IAEA and WHO. These aim at achieving general acceptance and practical implementation of food irradiation through rigorous investigations of its wholesomeness, technological and economic feasibility, and efforts to achieve the unimpeded movement of irradiated foods in international trade. Food irradiation processing has many uses

  15. Ten-Year Survival Results of a Randomized Trial of Irradiation of Internal Mammary Nodes After Mastectomy

    International Nuclear Information System (INIS)

    Hennequin, Christophe; Bossard, Nadine; Servagi-Vernat, Stéphanie; Maingon, Philippe; Dubois, Jean-Bernard; Datchary, Jean; Carrie, Christian; Roullet, Bernard; Suchaud, Jean-Philippe; Teissier, Eric; Lucardi, Audrey; Gerard, Jean-Pierre; Belot, Aurélien

    2013-01-01

    Purpose: To evaluate the efficacy of irradiation of internal mammary nodes (IMN) on 10-year overall survival in breast cancer patients after mastectomy. Methods and Patients: This multicenter phase 3 study enrolled patients with positive axillary nodes (pN+) or central/medial tumors with or without pN+. Other inclusion criteria were age <75 and a Karnofsky index ≥70. All patients received postoperative irradiation of the chest wall and supraclavicular nodes and were randomly assigned to receive IMN irradiation or not. Randomization was stratified by tumor location (medial/central or lateral), axillary lymph node status, and adjuvant therapy (chemotherapy vs no chemotherapy). The prescribed dose of irradiation to the target volumes was 50 Gy or equivalent. The first 5 intercostal spaces were included in the IMN target volume, and two-thirds of the dose (31.5 Gy) was given by electrons. The primary outcome was overall survival at 10 years. Disease-free survival and toxicity were secondary outcomes. Results: T total of 1334 patients were analyzed after a median follow-up of 11.3 years among the survivors. No benefit of IMN irradiation on the overall survival could be demonstrated: the 10-year overall survival was 59.3% in the IMN-nonirradiated group versus 62.6% in the IMN-irradiated group (P=.8). According to stratification factors, we defined 6 subgroups (medial/central or lateral tumor, pN0 [only for medial/central] or pN+, and chemotherapy or not). In all these subgroups, IMN irradiation did not significantly improve overall survival. Conclusions: In patients treated with 2-dimensional techniques, we failed to demonstrate a survival benefit for IMN irradiation. This study cannot rule out a moderate benefit, especially with more modern, conformal techniques applied to a higher risk population

  16. Experience of European LWR irradiated fuel transport: the first five hundred tonnes

    International Nuclear Information System (INIS)

    Curtis, H.W.

    1978-01-01

    The paper describes the service provided by an international company specializing in the transport of LWR irradiated fuel throughout Europe. Methods of transport used to the reprocessing plants at La Hague and Windscale include road transport of 38 te flasks over the whole route; transport of flasks between 55 and 105 te by rail, with rail-head and the reprocessing plant, where required, performed by road using heavy trailers; roll-on, roll-off sea ferries; and charter ships. Different modes of transport have been developed to cater for the various limitations on access to reactor sites arising from geographical and routing considerations. The experience of transporting more than 500 tonnes of irradiated uranium from twenty-one power reactors is used to illustrate the flexibility which the transport organization requires when the access and handling facilities are different at almost every reactor. Variations in fuel cross sections and lengths of fuel elements used in first generation reactors created the need for first generation flasks with sufficient variants to accommodate all reactor fuels but the trend now is towards standardization of flasks to perhaps two basic types. The safety record of irradiated fuel transport is examined with explanation of the means whereby this has been achieved. The problems of programming the movement of a pool of eighteen flasks for twenty-one reactors in eight countries are discussed together with the steps taken to ensure that the service operates fairly to give priority to those reactors with the greatest problems. The transport of irradiated fuel across several national frontiers is an international task which requires an international company. The transport of European irradiated fuel can be presented as an example of international collaboration which works

  17. Irradiation-induced displacement of Ag atoms from lattice sites in an Al-0.2% Mg-0.1% Ag crystal

    International Nuclear Information System (INIS)

    Swanson, M.L.; Howe, L.M.; Quenneville, A.F.

    1976-01-01

    In irradiated alloys of Al containing approximately 0.1 at% Ag, the backscattering - channelling method shows that Al-Ag dumbells are created by the trapping of Al interstitial atoms at Ag solute atoms. The present results demonstrate that the addition of 0.2 at% Mg to such irradiated alloys retards not only the formation of Al-Ag dumbells during annealing from 30 to 100 K but also their annihilation during annealing from 180 to 240 K. Al interstitials are released from Mg traps at 100 to 160 K, causing further trapping at Ag atoms. Approximately 70% of the Ag atoms return to lattice sites at approximately 200 K (stage III) (compared with 100% in the Al-0.1% Ag alloys) and the remainder return to lattice sites at approximately 260 K. These results favour migration of Al-Ag dumbells rather than vacancies during stage III annealing. (author)

  18. AGC-2 Irradiation Report

    Energy Technology Data Exchange (ETDEWEB)

    Rohrbaugh, David Thomas [Idaho National Lab. (INL), Idaho Falls, ID (United States); Windes, William [Idaho National Lab. (INL), Idaho Falls, ID (United States); Swank, W. David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-06-01

    The Next Generation Nuclear Plant (NGNP) will be a helium-cooled, very high temperature reactor (VHTR) with a large graphite core. In past applications, graphite has been used effectively as a structural and moderator material in both research and commercial high temperature gas cooled reactor (HTGR) designs.[ , ] Nuclear graphite H 451, used previously in the United States for nuclear reactor graphite components, is no longer available. New nuclear graphites have been developed and are considered suitable candidates for the new NGNP reactor design. To support the design and licensing of NGNP core components within a commercial reactor, a complete properties database must be developed for these current grades of graphite. Quantitative data on in service material performance are required for the physical, mechanical, and thermal properties of each graphite grade with a specific emphasis on data related to the life limiting effects of irradiation creep on key physical properties of the NGNP candidate graphites. Based on experience with previous graphite core components, the phenomenon of irradiation induced creep within the graphite has been shown to be critical to the total useful lifetime of graphite components. Irradiation induced creep occurs under the simultaneous application of high temperatures, neutron irradiation, and applied stresses within the graphite components. Significant internal stresses within the graphite components can result from a second phenomenon—irradiation induced dimensional change. In this case, the graphite physically changes i.e., first shrinking and then expanding with increasing neutron dose. This disparity in material volume change can induce significant internal stresses within graphite components. Irradiation induced creep relaxes these large internal stresses, thus reducing the risk of crack formation and component failure. Obviously, higher irradiation creep levels tend to relieve more internal stress, thus allowing the

  19. Non-destructive tests of capsules for JMTR irradiation examination

    International Nuclear Information System (INIS)

    Tanaka, Hidetaka; Nagao, Yoshiharu; Sato, Masashi; Osawa, Kenji

    2007-03-01

    Irradiation examination are increasing in advanced irradiation research for accurate prediction control and evaluation of irradiation parameter such as neutron fluence, etc. by using JMTR. Irradiation capsule internals are therefore structurally complicated recently. This report described the procedure of non destructive tests such as radiographic test, penetrant test, ultrasonic test, etc. for inspection of irradiation capsules in JMTR, and the result of Test-case of confirmation procedure for internal parts of irradiation capsules. (author)

  20. IFMIF (International Fusion Materials Irradiation Facility) key element technology phase interim report

    International Nuclear Information System (INIS)

    Nakamura, Hiroo; Ida, Mizuho; Sugimoto, Masayoshi; Takeuchi, Hiroshi; Yutani, Toshiaki

    2002-03-01

    Activities of International Fusion Materials Irradiation Facility (IFMIF) have been performed under an IEA collaboration since 1995. IFMIF is an accelerator-based deuteron (D + )-lithium (Li) neutron source designed to produce an intense neutron field (2 MW/m 2 , 20 dpa/year for Fe) in a volume of 500 cm 3 for testing candidate fusion materials. In 2000, a 3 year Key Element technology Phase (KEP) of IFMIF was started to reduce the key technology risk factors. This interim report summarizes the KEP activities until mid 2001 in the major project work-breakdown areas of accelerator, target, test facilities and design integration. (author)

  1. Status and possible prospects of an international fusion materials irradiation facility

    International Nuclear Information System (INIS)

    Cozzani, F.

    1999-01-01

    Structural materials for future DT fusion power reactors will have to operate under intense neutron fields with energies up to 14 MeV and fluences in the order of 2 MW/m 2 per year. As environmental acceptability, safety considerations and economic viability will be ultimately the keys to the widespread introduction of fusion power, the development of radiation-resistant and low activation materials would contribute significantly to fusion development. For this purpose, testing of materials under irradiation conditions close to those expected in a fusion power station would require the availability, in an appropriate time framework, of an intense, high-energy neutron source. Recent advances in linear accelerator technology, in small specimens testing technology, and in the comprehension of damage phenomena, lead to the conclusion that an accelerator-based D-Li neutron source, with beam energy variability, would provide the most realistic option for a fusion materials testing facility. Under the auspices of the IEA, an international effort (EU, Japan, US, RF) to carry out the conceptual design activities (CDA) of an international fusion materials irradiation facility (IFMIF), based on the D-Li concept, have been carried out successfully. A final conceptual design report was produced at the end of 1996. A phase of conceptual design evaluation (CDE), presently underway, is extending and further refining some of the conceptual design details of IFMIF. The results indicate that an IFMIF-class installation would be technically feasible and could meet its mission objectives. However, a suitable phase of Engineering Validation, to carry out some complementary R and D and prototyping, would still be needed to resolve a few key technical uncertainties before the possibility to proceed toward detailed design and construction could be explored. (orig.)

  2. Subclavian artery dissection during catheterization in a patient after irradiation

    International Nuclear Information System (INIS)

    Kanazawa, Susumu; Hiraki, Yoshio; Fujie, Shunji; Sato, Nobuo.

    1997-01-01

    A 47-year-old woman with right breast cancer underwent partial mastectomy and had irradiations to the primary and metastatic sites, including the left supraclavicular region. During catheterization of the left internal mammary artery for arterial infusion therapy, the patient developed an iatrogenic dissection and subsequent occlusion of the left subclavian artery. Arterial infusion of tissue plasminogen activator into the artery resulted in recanalization and improvement of clinical signs and symptoms. (author)

  3. Internal stress distribution for generating closure domains in laser-irradiated Fe–3%Si(110) steels

    International Nuclear Information System (INIS)

    Iwata, Keiji; Imafuku, Muneyuki; Orihara, Hideto; Sakai, Yusuke; Ohya, Shin-Ichi; Suzuki, Tamaki; Shobu, Takahisa; Akita, Koichi; Ishiyama, Kazushi

    2015-01-01

    Internal stress distribution for generating closure domains occurring in laser-irradiated Fe–3%Si(110) steels was investigated using high-energy X-ray analysis and domain theory based on the variational principle. The measured triaxial stresses inside the specimen were compressive and the stress in the rolling direction became more dominant than stresses in the other directions. The calculations based on the variational principle of magnetic energy for closure domains showed that the measured triaxial stresses made the closure domains more stable than the basic domain without closure domains. The experimental and calculation results reveal that the laser-introduced internal stresses result in the occurrence of the closure domains

  4. 76 FR 2145 - International Paper Company, Franklin Pulp & Paper Mill, Including On-Site Leased Workers From...

    Science.gov (United States)

    2011-01-12

    ... Company, Franklin Pulp & Paper Mill, Including On-Site Leased Workers From Railserve, Franklin, VA..., applicable to workers and former workers of International Paper Company, Franklin Pulp & Paper Mill, Franklin... follows: All workers International Paper Company, Franklin Pulp & Paper Mill, including on-site leased...

  5. Mucosal injury and γ-irradiation produce persistent gastric ulcers in the rabbit. Evaluation of antiulcer drug binding to experimental ulcer sites

    International Nuclear Information System (INIS)

    Yokel, R.A.; Dickey, K.M.

    1991-01-01

    A method producing persistent gastric ulcers in the rhesus monkey by combined mucosal injury and γ-irradiation was modified and evaluated in the rabbit. γ-Irradiation (800-1000 cGy) immediately after removal of 2-mm-diameter sections of antral mucosa resulted in ulcer craters 5-7 days later. Ulcer sites were characterized by loss of the mucosa, muscularis mucosa, and much of the submucosa. The exposed submucosa was coated with fibrin and necrotic debris infiltrated with heterophils, the rabbit equivalent of neutrophils. These ulcers strongly resemble human chronic gastric ulcers. Binding of Carafate (sucralfate; Marion Laboratories, Inc., Kansas City, MO) and Maalox (magnesia-alumina oral suspension; Wm. H. Rorer, Inc., Ft. Washington, PA) to ulcer and nearby nonulcer sites in the antrum was assessed 1 hour after drug dosing. Drug binding was determined by aluminum quantitation of stomach wall punch biopsies at necropsy. Both drugs significantly increased aluminum bound to the stomach wall compared with vehicle treatment. Significantly more antiulcer drug was bound to ulcer sites than to nearby nonulcer sites only after sucralfate administration. This model of persistent gastric ulcer should be useful to further study gastric ulcer pathogenesis and treatment

  6. Distribution of nuclease attack sites and complexity of DNA in the products of post-irradiation degradiation of rat thymus chromatin

    International Nuclear Information System (INIS)

    Zvonareva, N.B.; Zhivotovsky, B.D.; Hanson, K.P.

    1983-01-01

    The distribution of nuclease attack sites in chromatin has been studied on the basis of the quantitative relationship of the single- and double-stranded fragments of various lengths in the products of post-irradiation degradation of chromatin (PDN). It has been shown that in irradiated thymocytes internucleosome degradation of chromatin occurs and the products of the enzymic digestion of chromatin derive from randomly distributed genome areas accumulate. Analysis of the reassociation curves has not shown any differences in the complexity of the PDN fractions and total DNA. (author)

  7. Radiation consequences of the nuclear tests on the Semipalatinsk test site

    International Nuclear Information System (INIS)

    Logachev, V.A.; Logacheva, L.A.

    2001-01-01

    In the paper the results of retrospective evaluation for radiation situation and radiation doses of population in the zones of the Semipalatinsk test site activity influence are presented. For the measurements the data obtained during analysis, study and summarizing of the archival materials including information on nuclear tests on this site and results of radiation surveys, those were carried out after each test were used. The information testifying most substantial environment contamination taking place after four surface explosions (29.08.1949, 24.09.1951, 12.08.1953, 24.08.1956) is presented as well. After these dose-forming explosions the irradiation doses of the population inhabiting out the regime zone have been exceeded the maximum permissible levels. Results of analysis of archival materials were used for assessment of doses of internal and external irradiation of residents of inhabited points situated on the both the territory of the Republic of Kazakhstan - mainly close to the test site - and the territories of a number of regions of the Russian Federation are locating on the little distance from the tests site

  8. Fruit irradiation

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Food spoilage is a common problem when marketing agricultural products. Promising results have already been obtained on a number of food irradiating applications. A process is described in this paper where irradiation of sub-tropical fruits, especially mangoes and papayas, combined with conventional heat treatment results in effective insect and fungal control, delays ripening and greatly improves the quality of fruit at both export and internal markets

  9. A study by internal friction of defects produced in iron and nickel irradiated at very low temperatures; Etude au moyen du frottement interne des defauts crees par irradiation a tres basse temperature dans le fer et le nickel

    Energy Technology Data Exchange (ETDEWEB)

    Keating-Hart, G de [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    This work represents a contribution to the study of point defects in metals. After a brief review of the theory of internal friction we will discuss some technical innovations aimed at increasing the flexibility of the apparatus at our disposal. These innovations have allowed us to extend our range of measurements down to 20 deg. K. We will then discuss our experimental results. Firstly, we describe preliminary experiments on electron irradiated iron and the evidence for a laminar structure. Secondly, we present and account of the first measurements on nickel after neutron irradiation at 27 deg. K. We will compare the results with those obtained by other methods in this laboratory. Essentially we have observed transitory peaks at low temperature due to close Frenkel pairs and we have noticed the absence of a peak which would correspond to the magnetic after effect band of stage I{sub E}. An attempt is made to explain the disappearance of the observed peaks upon the application of an internal saturating magnetic field. (author) [French] Ce memoire constitue une contribution a l'etude des defauts ponctuels dans les metaux. Apres un bref apercu theorique sur le frottement interne, nous presenterons quelques realisations techniques destinees a accroitre les possibilites des instruments qui nous ont ete confies. Ces dernieres nous ont permis d'etendre la gamme des mesures jusqu'a 20 deg. K. Nous parlerons ensuite de nos resultats experimentaux. En premier lieu, ceux obtenus au cours de premieres experiences, sur le fer irradie aux electrons mettent en evidence des structures de laminage. En second lieu, nous exposerons les premieres mesures realisees sur du nickel irradie aux neutrons; nous comparerons ces resultats avec ceux obtenus par d'autres moyens experimentaux dans le laboratoire. Nous avons observe essentiellement des pics fugitifs a basse temperature dus aux paires proches de Frenckel et nous avons constate l'absence d'un pic correspondant a la bande de tramage

  10. Irradiation Microstructure of Austenitic Steels and Cast Steels Irradiated in the BOR-60 Reactor at 320°C

    Science.gov (United States)

    Yang, Yong; Chen, Yiren; Huang, Yina; Allen, Todd; Rao, Appajosula

    Reactor internal components are subjected to neutron irradiation in light water reactors, and with the aging of nuclear power plants around the world, irradiation-induced material degradations are of concern for reactor internals. Irradiation-induced defects resulting from displacement damage are critical for understanding degradation in structural materials. In the present work, microstructural changes due to irradiation in austenitic stainless steels and cast steels were characterized using transmission electron microscopy. The specimens were irradiated in the BOR-60 reactor, a fast breeder reactor, up to 40 dpa at 320°C. The dose rate was approximately 9.4x10-7 dpa/s. Void swelling and irradiation defects were analyzed for these specimens. A high density of faulted loops dominated the irradiated-altered microstructures. Along with previous TEM results, a dose dependence of the defect structure was established at 320°C.

  11. Food irradiation process control and acceptance. Regional UNDP project for Asia and the Pacific, mission undertaken in Indonesia. Food irradiation process control, market testing and economic feasibility RPFI-Phase 3

    International Nuclear Information System (INIS)

    Giddings, G.G.

    1992-01-01

    At the request of the Government of Indonesia, the FAO/IAEA expert undertook a one-week mission to Indonesia between 9 and 16 March 1991, to the Center for Application of Isotopes and Radiation (CAIR) of BATAN at Jakarta. This mission included the following: The expert advised and assisted on matters related to radiation processing and food irradiation relevant to Indonesia and its on-going programmes, including meetings with CAIR Director, Mrs. Nazly Hilmy, and NAEA Deputy Director General, Dr. H. Nazir Abdullah. Consultations were also held with the various groups within the CAIR regarding their research and development programmes, and in particular the group involved specifically with food irradiation. In the company of CAIR staff members, a meeting was held at the Ministry of Health's Directorate for Food and Drug Control regarding legislative, regulatory and industrial food irradiation actions and activities in other countries, prospects for international trade, and the status of these aspects in Indonesia. A visit and tour was made at the Jakarta facilities of New York City - New Jersey (USA) - based International Flavours and Fragances (IFF) which has certain of its raw materials irradiated for hygienic purposes at the (CAIR). A separate meeting was held at the offices of P.T. Perkasa Rubberindo, whose Sterilindo subsidiary is having an industrial gamma irradiator installed at its rubber products manufacturing site East of Jakarta. The expert provided a seminar on radiation processing in general, followed by a question and - answer session. The expert plus CAIR counterparts visited the Jakarta headquarters of the Indonesian Consumer Organization, an International Organization of Consumer Unions affiliate, that has been the most active in the opposition to food irradiation in Indonesia. Following debriefings the expert moved on the Vietnam leg of the three nation mission trip. (author)

  12. Legislative and administrative control of processing of and trade in irradiated food

    International Nuclear Information System (INIS)

    Loaharanu, P.

    1992-01-01

    This presentation will focus on regulatory and administrative procedures recently developed to strengthen the control aspect of commercial use of food irradiation. Most of these developed by the International Consultative Group on Food Irradiation (ICGFI) established under the aegis of FAO, IAEA and WHO since 1984. ICGFI has produced a number of guidelines/codes of practice to assist national authorities in regulating the commercial use of food irradiation. The following regulatory control provisions will be highlighted: 1. Codes of good irradiation practice for specific application of food irradiation. 2. International inventory of authorised food irradiation facilities. 3. International training programmes for operators/plant managers of irradiation facilities and food inspectors. 4. International Dose Assurance Service (IDAS). 5. Labelling. 6. Certificate of irradiated food. (orig.) [de

  13. The significance of neuroendocrine system state in estimation of nonstochastic effects of small doses of internal irradiation. (An experimental study)

    International Nuclear Information System (INIS)

    Dedov, V.I.; Norets, T.A.; Stepanenko, V.F.; Dedenkov, A.N.

    1987-01-01

    Data on long-term complex investigations of nonstochastic effects of low doses of internal irradiation on the level of a whole organism are presented. Experiments have been carried out with mongrel rats of both sexes and different ages up to the moment of introduction of radioactive compounds. Action of relatively and uniformly distributing in the organism radiactive compounds of selenium - 75 and sulfur - 35, which were introduced once intravenously in quantities forming absorbed doses in average on the whole body and ovaries (0.5 Gy), on endocrine glands and critical organs (up to 1.0 Gy) has been used as models of internal radiation. Data, testifying to the fact that the neuroendocrinal system, despite the existing opinion, is sensitive to action of low doses of internal irradiation compared with the recommended one as an ultimate permissible one for nonstochastic effects ( 0.5 Sv), that permits to suggest for using factors of the functional state of the neuroendocrine system as an informative and sensitive criterium of estimation of biological action of low doses of internal radiation, have been obtained. These factors along with doses on critical organs permit to estimate the degree of dangerous action of different radionuclides on the organism level. Dynamic studying of activity factors of the neuroendocrine system with simultaneous analysis of the state of harmonically dependent processes permits to estimate functional possibilities of irradiated organism, its viability, especially under conditions requiring increased stress, as well as to take into account such factors modifying a biological effect as age, animal sex, the character of absorbed dose distribution

  14. Detection methods for irradiated foods

    International Nuclear Information System (INIS)

    Dyakova, A.; Tsvetkova, E.; Nikolova, R.

    2005-01-01

    In connection with the ongoing world application of irradiation as a technology in Food industry for increasing food safety, it became a need for methods of identification of irradiation. It was required to control international trade of irradiated foods, because of the certain that legally imposed food laws are not violated; supervise correct labeling; avoid multiple irradiation. Physical, chemical and biological methods for detection of irradiated foods as well principle that are based, are introducing in this summary

  15. Regulatory inspection of the egyptian gamma irradiator using a proposed inspection checklist

    International Nuclear Information System (INIS)

    Abdel-Ghani, A.H.

    2000-01-01

    Regulatory inspections are one of the most important elements of a regulatory programme. It shall be performed in all areas of the regulatory responsibility and during all phases of siting, design, construction, commissioning, operation, maintenance and decommissioning of an irradiator facility. The egyptian mega gamma irradiator operating since december 1979 has a Co-60 source of about 400 kilo curies and is used mainly for sterilization of medical supplies and pharmaceuticals and for preservation of some food stuffs. The constructor (Nordion international Inc.) recommended an extensive inspection programme. In accordance with the international and national (2.3) regulations as well as the licensing conditions, the competent authority (NCNSRC) shall perform regulatory inspections both announced and unannounced. In order to facilitate the inspection task and to harmonize the inspection reports a checklist for inspection is proposed which can be used also as an inspection report form

  16. Some physical properties of irradiated and non-irradiated oxide glasses containing uranium

    International Nuclear Information System (INIS)

    Simon, V.; Ardelean, I.; Simon, S.; Cozar, O.; Milea, I.; Lupsa, I.; Mih, V.

    1995-01-01

    The x U O 3 (1-x) [2 P 2 O 5 · Na 2 O] non-irradiated and gamma irradiated glasses (0 3+ , U 4+ and U 5+ ions. The gamma irradiation induces paramagnetic defects around the glass network forming sites occupied by phosphorous atoms. The non-irradiated samples are weak paramagnetic up to x = 0.1. For higher U O 3 concentration (0.1 < x ≤ 0.2) the magnetic measurements indicated a larger number of paramagnetic ions which are magnetically isolated and exhibit a Curie type behaviour. (author) 5 figs., 14 refs

  17. Foodstuff irradiation

    International Nuclear Information System (INIS)

    1982-01-01

    Report written on behalf of the Danish Food Institute summarizes national and international rules and developments within food irradiation technology, chemical changes in irradiated foodstuffs, microbiological and health-related aspects of irradiation and finally technological prospects of this conservation form. Food irradiatin has not been hitherto applied in Denmark. Radiation sources and secondary radiation doses in processed food are characterized. Chemical changes due to irradiation are compared to those due to p.ex. food heating. Toxicological and microbiological tests and their results give no unequivocal answer to the problem whether a foodstuff has been irradiated. The most likely application fields in Denmark are for low radiation dosis inhibition of germination, riping delay and insecticide. Medium dosis (1-10 kGy) can reduce bacteria number while high dosis (10-50 kGy) will enable total elimination of microorganisms and viruses. Food irradiation can be acceptable as technological possibility with reservation, that further studies follow. (EG)

  18. IFMIF (International Fusion Materials Irradiation Facility) key element technology phase interim report

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Hiroo; Ida, Mizuho; Sugimoto, Masayoshi; Takeuchi, Hiroshi; Yutani, Toshiaki (eds.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2002-03-01

    Activities of International Fusion Materials Irradiation Facility (IFMIF) have been performed under an IEA collaboration since 1995. IFMIF is an accelerator-based deuteron (D{sup +})-lithium (Li) neutron source designed to produce an intense neutron field (2 MW/m{sup 2}, 20 dpa/year for Fe) in a volume of 500 cm{sup 3} for testing candidate fusion materials. In 2000, a 3 year Key Element technology Phase (KEP) of IFMIF was started to reduce the key technology risk factors. This interim report summarizes the KEP activities until mid 2001 in the major project work-breakdown areas of accelerator, target, test facilities and design integration. (author)

  19. Acceptance, control of and trade in irradiated food

    International Nuclear Information System (INIS)

    1989-01-01

    Proceedings of an International Conference on the Acceptance, Control of and Trade in Irradiated Food jointly organized by the Food and Agriculture Organization of the United Nations, the World Health Organization, the International Atomic Energy Agency and the International Trade Centre-UNCTAD/GATT and held in Geneva, 12-16 December 1988. The Conference was prompted by the lack of acceptance by some governments, which do not see a need for the application of food irradiation technology in their own countries, and as a consequence may hamper its use in other countries where its application could significantly improve consumer health and nutrition, as well as national economic and trading potential. This publication contains discussions on the key issues of the wholesomeness of irradiated food, the contribution of this technology to public health, food security and international trade, the control of the process to ensure its correct application for consumer protection, and the acceptance of irradiated food by industry and consumers. The proceedings include the International Document on Food Irradiation, highlighting the major issues related to the acceptance of irradiated food by consumers, governmental and intergovernmental activities, the control of the process, and trade. A number of Member States formally expressed their views on this International Document, expressing either endorsement or reservation, and their statements are included in these proceedings. Refs, fig and tabs

  20. Internal irradiation by radon daughters in Bulgarian uranium mines over the period 1956-1990

    International Nuclear Information System (INIS)

    Dimitrov, M.; Presiyanov, D.

    1993-01-01

    The results of over 30-years' radiation monitoring in Bulgarian uranium mines are summed up in retrospect. The overall organization and the parameters monitored during the different periods are discussed. A radiological characteristic of the working environment is presented which includes radon and its decay products. The internal irradiation levels during different time periods and in different mines have been estimated. The health costs of uranium mining in Bulgaria are discussed and conclusions and recommendations for radiological control are made. (author)

  1. Food Irradiation Regulations And Code Of Practice

    International Nuclear Information System (INIS)

    Jimba, B.W. Centre For Energy Research And Training, Ahmadu Bello University, Zaria,

    1996-01-01

    Official attitude towards irradiated food is determined by factors such as: level of scientific knowledge, consumer habits, food shortages, agricultural production and technological know-how. To date, 39 countries have accepted the process for one or more food items while 27 nations carry out the process on a commercial basis. Regulations and codes of practice is essential for consumer confidence while uniformity of regulations, at the international level, will enhance international trade in irradiated food items. The internationally accepted Codex Standard on irradiated food and Codes of Practice for the operation of irradiation facilities, adopted in 1983, forms the basis for International regulations and a template for nations in the development of regulations. This paper discusses the basic legal requirements for licensing the process, procedures, facility and the operator and suggests a framework for a national regulation based on experiences of Hungary, Brazil and Israel

  2. Revealing by secondary electronic emission of internal electric fields in the yttriated zirconia, irradiated by electrons of 1 MeV

    International Nuclear Information System (INIS)

    Blaise, G.; Paris-11 Univ., 91 - Orsay

    2007-01-01

    The defects due to irradiation in a dielectric material present an activity which can generate macroscopic internal electric fields. A method of investigation of these fields, based on the measure of the Secondary Electronic Emission coefficient, has been developed on a scanning electric microscope. This ones contains two low noise detectors which respectively measure the influence current I IC produced by the charges trapping in the material and the current I SB due to secondary and backscattered electrons which come from the sample. The Secondary Emission coefficient is given by σ=I SB /(I SB +I IC ). The charges trapping during an electrons injection leads to a variation of σ for its intrinsic value σ 0 relative to the uncharged material, until the stationary value σ st =1 corresponding to the auto-regulated condition. This variation is due to the development of an internal electric field produced by the accumulation of the charges trapped during injection. In comparing the evolutions of σ of a fresh yttriated zirconia and of an yttriated zirconia irradiated by electrons of 1 MeV with a dose rate of 10 18 e/cm 2 , it has been revealed that an internal field (due to irradiation) of about 0.5*10 6 V/m exists at a depth of the micron order. This field, directed towards the outside of the material surface, is attributed to the F + defects and to the T centers produced by the impact of the electrons of 1 MeV. In carrying out annealings until 1000 K, a progressive disappearance of this field is observed in the temperature range of 400-600 K, directly due to the F + defects and T centers recovery, as it has been observed by ESR. An internal field three times weaker than the preceding ones has been revealed at a few nm under the surface. Its disappearance from a temperature of 1000 K suggests that it is due to the redistribution of the chemical species into the surface, during the irradiation with electrons of 1 MeV. (O.M.)

  3. Effect of irradiation in design of LMFBR internals

    International Nuclear Information System (INIS)

    Tavassoli, A.A.; Cowan, A.; Vries, M. de; Heesen, E.

    1990-01-01

    Internal structures of nuclear power reactors are essentially made with the austenitic stainless steels Types 304L and 316L. In service these structures receive low to moderate neutron doses. In this paper, the work undertaken by the European Fast Breeder Working Group is reviewed. Conclusions drawn to this date are presented and tentative reduction factors to be used in design are discussed in terms of the number of displacements per atom (dpa) and the quantity of helium generated in the steel (appm He). For the lower core structure which operates at about 400 0 C existing design rules can be used for parts which are subjected to less than 2 dpa despite a reduction in ductility and toughness which occurs above about 0.8 dpa. For the above core structure which operates at about 550 0 C interim and rather conservative stress reduction factors are proposed which can become effective at helium levels as low as 10 -4 appm. Particular attention is paid to: - irradiation temperature, - neutron flux and fluence, - steel type and grade, - heat treatment and boron distribution, - weld metal composition and procedure (TIG,MMA,...), to ensure that service conditions are represented as closely as possible

  4. Rupture of an internal carotid artery pseudoaneurysm after irradiation for a nasopharyngeal carcinoma. Case report

    International Nuclear Information System (INIS)

    Hanada, Yukiko; Nakamura, Megumi; Sasai, Hisanori; Kamakura, Aya; Sakata, Yoshiharu; Miyahara, Hiroshi

    2013-01-01

    The primary treatment of nasopharyngeal carcinoma (NPC) has been external radiotherapy. Rupture of an internal carotid artery (ICA) pseudoaneurysm is a rare complication of irradiation therapy for a nasopharyngeal carcinoma. A 78 years old man had a history of NPC treated with radiotherapy in 1993. He was admitted to the hospital because of epistaxis. Angiography showed an ICA pseudoaneurysm pointing medially to the nasopharynx. Coil embolization of the ICA was performed, but cerebral infarction occurred. Internal carotid artery (ICA) pseudoaneurysms are an uncommon but potentially lethal condition. Angiography is the mainstay of diagnosis of the aneurysm and planning the embolization of the ICA. We should be more aware of this complication in NPC patients. (author)

  5. Progress towards a new Canadian irradiation-research facility

    International Nuclear Information System (INIS)

    Lee, A.G.; Lidstone, R.F.

    1993-01-01

    As reported at the second meeting of the International Group on Research Reactors, Atomic Energy of Canada Limited (AECL) is evaluating its options for future irradiation facilities. During the past year significant progress has been made towards achieving consensus on the irradiation requirements for AECL's major research programs and interpreting those requirements in terms of desirable characteristics for experimental facilities in a research reactor. The next stage of the study involves identifying near-term and long-term options for irradiation-research facilities to meet the requirements. The near-term options include assessing the availability of the NRU reactor and the capabilities of existing research reactors. The long-term options include developing a new irradiation-research facility by adapting the technology base for the MAPLE-X10 reactor design. Because materials testing in support of CANDU power reactors dominates AECL's irradiation requirements, the new reactor concept is called the MAPLE Materials Testing Reactor (MAPLE-MTR). Parametric physics and engineering studies are in progress on alternative MAPLE-MTR configurations to assess the capabilities for the following types of test facilities: - fast-neutron sites, that accommodate materials-irradiation assemblies, - small-diameter vertical fuel test loops that accommodate multielement assemblies, - large-diameter vertical fuel test loops, each able to hold one or more CANDU fuel bundles, - horizontal test loops, each able to hold full-size CANDU fuel bundles or small-diameter multi-element assemblies, and - horizontal beam tubes

  6. Food preservation by irradiation

    International Nuclear Information System (INIS)

    Labots, H.; Huis in 't Veld, G.J.P.; Verrips, C.T.

    1985-01-01

    After a review of several methods for the preservation of food and the routes of food infections, the following chapters are devoted to the preservation by irradiation. Applications and legal aspects of food irradiation are described. Special reference is made to the international situation. (Auth.)

  7. Food preservation by irradiation

    International Nuclear Information System (INIS)

    Gottschalk, M.

    1978-01-01

    In November, 1977, an International Symposium on Food Preservation by Irradiation was held at Wageningen, the Netherlands. About 200 participants attended the Symposium which was organised by the International Atomic Energy Agency, the Food and Agriculture Organization of the United Nations and the World Health Organization; a reflection of the active interest which is being shown in food irradiation processing, particularly among developing countries. The 75 papers presented provided an excellent review of the current status of food irradiation on a wide range of different topics, and the Symposium also afforded the valuable opportunity for informal discussion among the participants and for developing personal contacts. A brief survey of the salient aspects discussed during the course of the meeting are reported on. (orig.) [de

  8. Localized skin changes at the site of immunization with highly irradiated cercariae of Schistosoma mansoni are associated with enhanced resistance to a challenge infection

    International Nuclear Information System (INIS)

    Miller, K.L.; Smithers, S.R.

    1982-01-01

    The level of immunity to a percutaneous cercarial challenge with Schistosoma mansoni was assayed 4-6 weeks after immunization of mice with highly irradiated (20 krad.) cercariae or schistosomula. When immunization and challenge occurred through the same skin site, resistance, particularly that which occurred in the skin, was greater than that observed when immunization and challenge occurred in different sites. The enhanced resistance is believed to be due to localized changes in the skin; 4 weeks after exposure to irradiated cercariae, abdominal skin is characterized by a thickened epidermis, changes in the ground substance and a cellular infiltration of the dermis. A convenient mouse model is described in which one or both ear pinnae are exposed to irradiated cercariae and a percutaneous challenge is given via the abdomen, thus eliminating the effects of local skin changes. In this model, the majority of the challenge infection which succumbs to the immune response appears to be killed in the skin. (author)

  9. Food irradiation seminar: Asia and the Pacific

    International Nuclear Information System (INIS)

    Mitchell, G.E.

    1986-01-01

    The report covers the Seminar for Asia and the Pacific on the practical application of food irradiation. The seminar assessed the practical application of food irradiation processes, commercial utilisation and international trade of irradiated food

  10. Regulatory aspect of food irradiation

    International Nuclear Information System (INIS)

    Harrison Aziz

    1985-01-01

    Interest in the process of food irradiation is reviewed once again internationally. Although food irradiation has been thoroughly investigated, global acceptance is still lacking. Factors which impede the progress of the technology are discussed here. (author)

  11. High activity gamma irradiators developed in Hungary

    International Nuclear Information System (INIS)

    Stenger, V.

    1997-01-01

    The development of high activity Gamma irradiators began in Hungary already in the early years of 60s. The very first designs were serving research in irradiation chemistry, radiation physics, food and agricultural research, radiation sterilization, plastic radiation chemistry, radiobiology, cancer therapy, personal and high dose dosimetry, following the international trends. Domestic and new international demands forced us to design and construct High Activity Gamma Irradiators: Multipurpose Pilot, Portable and Large scale bulk, Multipurpose Industrial scale types

  12. The prospect of food irradiation and the contribution of radiation chemistry to enact the hygienic safety standard of irradiated foods

    International Nuclear Information System (INIS)

    Wu Jilan; Yuan Rongyao

    1986-01-01

    Now, it is said that we are at the dawn of food irradiation application both nationally and internationally. However, referring to the acceptability of customers the labeling of irradiated foods has been a nightmare to the food processors. On the other hand the recommended international standard has the shortcomings of thinking in absolute terms. In this paper a proposal which puts special emphasis on enacting hygienic safety standard of individual irradiated food is recommended. The hygienic safety standard of the irradiated food may be classified in three classes: 1) its hygienic safety standard is similar to that of common food; 2) the maximum permissible quantities of harmful compounds induced by radiation must be controlled; and 3) the quantity of unique radiolysis products may by dutermined. Radiation chemistry plays an important role in enacting the hygienic safety standard of irradiated foods. For international cooperation in this field some suggestions are made

  13. Innovative approaches to the Management of Irradiated Nuclear Graphite Wastes: Addressing the Challenges through International Collaboration with Project 'GRAPA'

    International Nuclear Information System (INIS)

    Wickham, A.J.; Ojovan, M.; O'Sullivan, P.; )

    2017-01-01

    There exists more than 250.000 tonnes of irradiated (and therefore radioactive) nuclear graphite (i-graphite) in the world, primarily as a result of the development of graphite-moderated power-reactor systems, initially for defence and subsequently for commercial purposes. Only a very small number of such plants have been dismantled and, for most cases, the final destiny of the irradiated graphite remains unresolved. Future high-temperature reactor programmes, such as the Chinese HTR-PM development, will produce more graphite and carbonaceous wastes from both structural components and the fuel pebbles (which are approximately 96% carbonaceous), the latter producing a continuous stream of so-called 'operational waste'. The problem of dismantling irradiated graphite reactor stacks, possibly distorted through neutron damage and in some cases degraded further by radiation-chemical attack by gaseous coolants, and then finding the appropriate treatments and final destiny of the material, has exercised both the European Union and the International Atomic Energy Agency for more than 25 years, seeking to address the different issues and available disposal solutions in different IAEA Member States. An IAEA collaborative research programme on treatment options has recently been completed, and an active group of international specialists in this area has now been established as part of the IAEA International Decommissioning Network under the envelope of Project 'GRAPA' (Irradiated Graphite Processing Approaches), which includes representatives from Belgium, China, France, Germany, India, Italy, Lithuania, Rep. of Korea, Romania, Spain, Switzerland, Ukraine and the Russian Federation with direct responsibilities for various parts of the decommissioning and graphite-disposal process in a variety of reactor designs. Interest has also been expressed by colleagues from Sweden and Japan. Work is in progress on a number of topic areas where weaknesses in the

  14. Detection methods of irradiated foodstuffs

    Energy Technology Data Exchange (ETDEWEB)

    Ponta, C C; Cutrubinis, M; Georgescu, R [IRASM Center, Horia Hulubei National Institute for Physics and Nuclear Engineering, PO Box MG-6, RO-077125 Magurele-Bucharest (Romania); Mihai, R [Life and Environmental Physics Department, Horia Hulubei National Institute for Physics and Nuclear Engineering, PO Box MG-6, RO-077125 Magurele-Bucharest (Romania); Secu, M [National Institute of Materials Physics, Bucharest (Romania)

    2005-07-01

    Full text: Food irradiation has, in certain circumstances, an important role to play both in promoting food safety and in reducing food losses. The safety and availability of nutritious food are essential components of primary health care. WHO actively encourages the proper use of food irradiation in the fight against foodborne diseases and food losses. To this end, it collaborates closely with FAO and IAEA. Food irradiation can have a number of beneficial effects, including delay of ripening and prevention of sprouting; control of insects, parasites, helminths, pathogenic and spoilage bacteria, moulds and yeasts; and sterilization, which enables commodities to be stored unrefrigerated for long periods. The 1990s witnessed a significant advancement in food irradiation processing. As a result, progress has been made in commercialization of the technology, culminating in greater international trade in irradiated foods and the implementation of differing regulations relating to its use in many countries. Codex General Standard for Irradiated Foodstuffs and Recommended International Code of Practice for the Operation of Irradiation Facilities Used for the Treatment of Foods regulate food irradiation at international level. At European Union level there are in power Directive 1999/2/EC and Directive1999/3/EC. Every particular country has also its own regulations regarding food irradiation. In Romania, since 2002 the Norms Regarding Foodstuffs and Food Ingredients Treated by Ionizing Radiation are in power. These Norms are in fact the Romanian equivalent law of the European Directives 1999/2/EC and 1999/3/EC. The greater international trade in irradiated foods has led to the demand by consumers that irradiated food should be clearly labeled as such and that methods capable of differentiating between irradiated and nonirradiated products should be available. Thus a practical basis was sought to allow consumers to exercise a free choice as to which food they purchase. If a

  15. Food irradiation: Technology transfer in Asia, practical experiences

    Science.gov (United States)

    Kunstadt, Peter; Eng, P.

    1993-10-01

    Nordion International Inc., in cooperation with the Thai Office of Atomic Energy for Peace (OAEP) and the Canadian International Development Agency (CIDA) recently completed a unique food irradiation technology transfer project in Thailand. This complete food irradiation technology transfer project included the design and construction of an automatic multipurpose irradiation facility as well as the services of construction and installation management and experts in facility operation, maintenance and training. This paper provides an insight into the many events that led to the succesful conclusion of the world's first complete food irradiation technology transfer project.

  16. Food irradiation: technology transfer in Asia, practical experiences

    International Nuclear Information System (INIS)

    Kunstadt, P.

    1993-01-01

    Nordion International Inc., in cooperation with the Thai Office of Atomic Energy for Peace (OAEP) and the Canadian International Development Agency (CIDA) recently completed a unique food irradiation technology transfer project in Thailand. This complete food irradiation technology transfer project included the design and construction of an automatic multipurpose irradiation facility as well as the services of construction and installation management and experts in facility operation, maintenance and training. This paper provides an insight into the many events that led to the successful conclusion of the world's first complete food irradiation technology transfer project. (Author)

  17. Comparison of normal tissue dose with three-dimensional conformal techniques for breast cancer irradiation including the internal mammary nodes

    NARCIS (Netherlands)

    van der Laan, Hans Paul; Dolsma, Willemtje; van t Veld, Aart; Bijl, HP; Langendijk, JA

    2005-01-01

    PURPOSE: To compare the Para Mixed technique for irradiation of the internal mammary nodes (IMN) with three commonly used strategies, by analyzing the dose to the heart and other organs at risk. METHODS AND MATERIALS: Four different three-dimensional conformal dose plans were created for 30 breast

  18. Stem cell migration after irradiation

    International Nuclear Information System (INIS)

    Nothdurft, W.; Fliedner, T.M.

    1979-01-01

    The survival rate of irradiated rodents could be significantly improved by shielding only the small parts of hemopoietic tissues during the course of irradiation. The populations of circulating stem cells in adult organisms are considered to be of some importance for the homeostasis between the many sites of blood cell formation and for the necessary flexibility of hemopoietic response in the face of fluctuating demands. Pluripotent stem cells are migrating through peripheral blood as has been shown for several mammalian species. Under steady state conditions, the exchange of stem cells between the different sites of blood cell formation appears to be restricted. Their presence in blood and the fact that they are in balance with the extravascular stem cell pool may well be of significance for the surveilance of the integrity of local stem cell populations. Any decrease of stem cell population in blood below a critical size results in the rapid immigration of circulating stem cells in order to restore local stem cell pool size. Blood stem cells are involved in the regeneration after whole-body irradiation if the stem cell population in bone marrows is reduced to less than 10% of the normal state. In the animals subjected to partial-body irradiation, the circulating stem cells appear to be the only source for the repopulation of the heavily irradiated, aplastic sites of hemopoietic organs. (Yamashita, S.)

  19. Lead test assembly irradiation and analysis Watts Bar Nuclear Plant, Tennessee and Hanford Site, Richland, Washington

    International Nuclear Information System (INIS)

    1997-07-01

    The U.S. Department of Energy (DOE) needs to confirm the viability of using a commercial light water reactor (CLWR) as a potential source for maintaining the nation's supply of tritium. The Proposed Action discussed in this environmental assessment is a limited scale confirmatory test that would provide DOE with information needed to assess that option. This document contains the environmental assessment results for the Lead test assembly irradiation and analysis for the Watts Bar Nuclear Plant, Tennessee, and the Hanford Site in Richland, Washington

  20. Analysis of irradiation disordering data

    Energy Technology Data Exchange (ETDEWEB)

    Schwartz, D L [Jet Propulsion Lab., Pasadena, CA (USA); Schwartz, D M

    1978-08-01

    The analysis of irradiation disordering data in ordered Ni/sub 3/Mn is discussed. An analytical expression relating observed irradiation induced magnetic changes in this material to the number of alternating site <110> replacements is derived. This expression is then employed to analyze previous experimental results. This analysis gives results which appear to be consistent with a previous Monte Carlo data analysis and indicates that the expected number of alternating site <110> replacements is 66.4 per 450 eV recoil.

  1. Relationship between chromosomal aberration of bone marrow cells and dosage of irradiation after 46Sc internal pollution and external low dose X-irradiation in mice

    International Nuclear Information System (INIS)

    Li Guofu; Li Zhang; Wu Yin

    1989-01-01

    The relationship between chromosomal aberration of bone marrow cells and dosage in mice 24 h after 46 Sc internal pollution combined with external low dose whole body X-irradiation was quantiatively studied. The results showed that the relationship between chromosomal aberration and dosage was expressed in a linear regression equation. The chromosomal aberration rate was lower in the combined exposure than that of the sum of internal and external exposures, but higher than that of either the internal or external exposure singly. The relationship between chromosomal aberration and time was expressed in the following three phase exponential function: Y(t) = 2.9078 exp 0.27668t + 2.9371 exp -0.0778t + 2.3786 -0.01788t . By means of fit test, there was no significant difference between the determined and the theoretical values. The 90% theoretical values got from all the equations distributed over the determined values

  2. Partial digestion with restriction enzymes of ultraviolet-irradiated human genomic DNA: a method for identifying restriction site polymorphisms

    International Nuclear Information System (INIS)

    Nobile, C.; Romeo, G.

    1988-01-01

    A method for partial digestion of total human DNA with restriction enzymes has been developed on the basis of a principle already utilized by P.A. Whittaker and E. Southern for the analysis of phage lambda recombinants. Total human DNA irradiated with uv light of 254 nm is partially digested by restriction enzymes that recognize sequences containing adjacent thymidines because of TT dimer formation. The products resulting from partial digestion of specific genomic regions are detected in Southern blots by genomic-unique DNA probes with high reproducibility. This procedure is rapid and simple to perform because the same conditions of uv irradiation are used for different enzymes and probes. It is shown that restriction site polymorphisms occurring in the genomic regions analyzed are recognized by the allelic partial digest patterns they determine

  3. The spectral irradiance traceability chain at PTB

    International Nuclear Information System (INIS)

    Sperfeld, P.; Pape, S.; Nevas, S.

    2013-01-01

    Spectral irradiance is a fundamental radiometric unit. Its application to measurement results requires qualified traceability to basic units of the international system of units (Système international d’unités, SI). The Physikalisch-Technische Bundesanstalt (PTB) is amongst other national metrological institutes (NMIs) responsible for the realization, maintenance and dissemination of various radiometric and photometric units based on and traceable to national standards. The unit of spectral irradiance is realized and represented by a blackbody-radiator as the national primary standard of the PTB. Based on Planck’s radiation law, the irradiance is calculated and realized for any wavelength taking into account the exact knowledge of the radiation temperature and the geometrical parameters. Using a double-monochromator-based spectroradiometer system, secondary standard lamps can be calibrated by direct comparison to the blackbody-radiator (substitution method). These secondary standard lamps are then used at the PTB to calibrate standard lamps of customers. The customers themselves use these so-called transfer standards to calibrate their working standard lamps. These working standards are then used to calibrate own spectroradiometers or sources. This rather complex calibration chain is a common procedural method that for the customers generally leads to satisfying measurement results on site. Nevertheless, the standard lamps in use have to fulfill highest requirements concerning stability and reproducibility. Only this allows achieving comparably low transfer measurement uncertainties, which occur at each calibration step. Thus, the PTB is constantly investigating the improvement and further development of transfer standards and measurement methods for various spectral regions. The realization and dissemination of the spectral irradiance using the blackbody-radiator at the PTB is accomplished with worldwide approved minimized measurement uncertainties confirmed

  4. The spectral irradiance traceability chain at PTB

    Energy Technology Data Exchange (ETDEWEB)

    Sperfeld, P.; Pape, S.; Nevas, S. [Physikalisch-Technische Bundesanstalt, Bundesallee 10, 381160 Braunschweig (Germany)

    2013-05-10

    Spectral irradiance is a fundamental radiometric unit. Its application to measurement results requires qualified traceability to basic units of the international system of units (Systeme international d'unites, SI). The Physikalisch-Technische Bundesanstalt (PTB) is amongst other national metrological institutes (NMIs) responsible for the realization, maintenance and dissemination of various radiometric and photometric units based on and traceable to national standards. The unit of spectral irradiance is realized and represented by a blackbody-radiator as the national primary standard of the PTB. Based on Planck's radiation law, the irradiance is calculated and realized for any wavelength taking into account the exact knowledge of the radiation temperature and the geometrical parameters. Using a double-monochromator-based spectroradiometer system, secondary standard lamps can be calibrated by direct comparison to the blackbody-radiator (substitution method). These secondary standard lamps are then used at the PTB to calibrate standard lamps of customers. The customers themselves use these so-called transfer standards to calibrate their working standard lamps. These working standards are then used to calibrate own spectroradiometers or sources. This rather complex calibration chain is a common procedural method that for the customers generally leads to satisfying measurement results on site. Nevertheless, the standard lamps in use have to fulfill highest requirements concerning stability and reproducibility. Only this allows achieving comparably low transfer measurement uncertainties, which occur at each calibration step. Thus, the PTB is constantly investigating the improvement and further development of transfer standards and measurement methods for various spectral regions. The realization and dissemination of the spectral irradiance using the blackbody-radiator at the PTB is accomplished with worldwide approved minimized measurement uncertainties

  5. Policy plan for the early approval for irradiated meat products and the promotion of irradiated meats in market

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ju Woon [Team for Radiation Food Science and Biotechnology, Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of); Kim, Wang Geun [Ministry of Education, Science and Technology, Seoul (Korea, Republic of); Kim, Kyong Su [Dept. of Food and Nutrition, Chosun University, Gwangju (Korea, Republic of); Yook, Hong Sun [Dept. of Food and Nutrition, Chungnam National University, Daejeon (Korea, Republic of); Kim, Cheon Jei [Division of Animal Life Science, Konkuk University, Seoul (Korea, Republic of)

    2008-11-15

    The consumption of meat products is gradually being increased by the development of livestock raising technology, industrialized farm management and international trade. This increased consumption also created new market for ready-to-eat and ready-to-cook meat products. However, these convenience meat products can be easily contaminated during the processing and storage by pathogens, and there have been many reported cases of food borne illness by meats. One of the most effective methods for the decontamination of meat products is the radiation technology. Food irradiation was the established, well-recognized and safe sterilization method. Many other countries researched the effect of irradiation on the meat products and approved the irradiation. In this article, the effectiveness, the international acceptance, the economics and the research trend of irradiation on meat products have been reviewed. Also, the policy plans for the early approval of the irradiated meat products in Korea and the promotion policy of irradiated meats in market were discussed.

  6. Policy plan for the early approval for irradiated meat products and the promotion of irradiated meats in market

    International Nuclear Information System (INIS)

    Lee, Ju Woon; Kim, Wang Geun; Kim, Kyong Su; Yook, Hong Sun; Kim, Cheon Jei

    2008-01-01

    The consumption of meat products is gradually being increased by the development of livestock raising technology, industrialized farm management and international trade. This increased consumption also created new market for ready-to-eat and ready-to-cook meat products. However, these convenience meat products can be easily contaminated during the processing and storage by pathogens, and there have been many reported cases of food borne illness by meats. One of the most effective methods for the decontamination of meat products is the radiation technology. Food irradiation was the established, well-recognized and safe sterilization method. Many other countries researched the effect of irradiation on the meat products and approved the irradiation. In this article, the effectiveness, the international acceptance, the economics and the research trend of irradiation on meat products have been reviewed. Also, the policy plans for the early approval of the irradiated meat products in Korea and the promotion policy of irradiated meats in market were discussed

  7. SAFARI 2000 AERONET-derived Diffuse Spectral Irradiance for Eight Core Sites

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set contains monthly mean values of diffuse irradiance fraction [f(Ediff), or ratio of diffuse-to-total irradiance] at ground level for a 30-degree solar...

  8. Influence of ion irradiation on internal residual stress in DLC films

    Energy Technology Data Exchange (ETDEWEB)

    Karaseov, Platon A., E-mail: platon.karaseov@rphf.spbstu.r [St. Petersburg State Polytechnic University, Polytechnicheskaya St. 29, 195251 St. Petersburg (Russian Federation); Podsvirov, Oleg A.; Karabeshkin, Konstantin V. [St. Petersburg State Polytechnic University, Polytechnicheskaya St. 29, 195251 St. Petersburg (Russian Federation); Vinogradov, Andrei Ya. [Ioffe Physicotechnical Institute RAS, Polytechnicheskaya 26, 195252 St. Petersburg (Russian Federation); Azarov, Alexander Yu. [St. Petersburg State Polytechnic University, Polytechnicheskaya St. 29, 195251 St. Petersburg (Russian Federation); Karasev, Nikita N. [State University of Information Technologies, Mechanics and Optics, Sablinskaya Str. 14, 197101 St. Petersburg (Russian Federation); Titov, Andrei I.; Smirnov, Alexander S. [St. Petersburg State Polytechnic University, Polytechnicheskaya St. 29, 195251 St. Petersburg (Russian Federation)

    2010-10-01

    The dependence of internal residual stress in thin diamond-like carbon films grown on Si substrate by PECVD technique on most important growth parameters, namely RF-power, DC bias voltage and substrate temperature, is described. Results show that compressive stress reaches the highest value of 2.7 GPa at low RF-power and DC bias. Increase of substrate temperature from 250 to 350 {sup o}C leads to nonlinear increase of stress value. Inhomogeneity of residual stress along the film surface disappears when film is deposited at temperatures above 275 {sup o}C. Post-growth film irradiation by P{sup +} and In{sup +} ions cause decrease of compressive stress followed by its inversion to tensile. For all ion energy combinations used residual stress changes linearly with normalized fluence up to 0.2 DPA with slope (8.7 {+-} 1.3) GPa/DPA.

  9. International Atomic Energy Agency/Hanford Site shared use of calorimeters

    International Nuclear Information System (INIS)

    Welsh, T.L.

    1997-01-01

    Hanford Site operators combine gamma ray isotopic and calorimetry measurements for nondestructive plutonium assay. Such measurements offer lower variability (particularly for heterogeneous materials) and decreased radiation exposure, cost, waste, intrusiveness, and material handling compared to destructive analysis. Until now, the International Atomic Energy Agency (IAEA) has relied on destructive analysis to perform the most accurate verification requirements for plutonium stored under safeguards at the Hanford Site. It was recognized that using calorimetry could significantly reduce the need for the IAEA to perform destructive analysis. To authorize the operator's calorimeters for routine IAEA use, however, it was necessary to develop authentication features and perform independent 1558 testing. Authentication features include IAEA control of the hardware and calorimeter operating system software, measurement of certified IAEA standards, sealing of calorimeter chambers, and limited destructive analysis of IAEA selected items. A field test of these authentication features was performed at the Hanford Site in June 1997. The field test also was meant to enhance the credibility the IAEA imputes to calorimetry prior to its implementation. Progress in shared use of the Hanford Site calorimeters is reported

  10. Can the sentinel lymph node technique affect decisions to offer internal mammary chain irradiation?

    International Nuclear Information System (INIS)

    Bourre, Jean-Cyril; Payan, Raoul; Collomb, Delphine; Gallazzini-Crepin, Celine; Calizzano, Alex; Desruet, Marie-Dominique; Pasquier, Dominique; Bolla, Michel; Fagret, Daniel; Vuillez, Jean-Philippe

    2009-01-01

    Identification of the sentinel lymph node (SLN) for small mammary tumours (cT1N0) sometimes leads to detection of internal mammary chain (IMC) drainage. This information is often ignored by physicians. The present study sought to determine the frequency with which an internal mammary SLN was identified by peritumoral injection of radioactive tracer, and then to determine the patients in whom identification of an internal mammary SLN could have an impact on the radiation treatment plan. Between March 2002 and March 2008, 622 SLN biopsies performed in a cohort of 608 patients were analysed. Technetium-labelled nanocolloids were administered via three peritumoral injections, completed by a deep prepectoral injection, with the entire procedure performed under echographic guidance. The SLN was identified in 607 of the 622 patients, including 174 (28.7%) in the IMC. A total of 161 successful internal mammary biopsies were performed. Of the 622 patients, 18 showed SLN involvement in the IMC. In 7 of these patients, only the internal mammary SLN was affected. Prophylactic irradiation of the IMC was indicated in 376 patients, but only in 18 (4.8%) of these patients was there effectively IMC involvement; internal mammary SLN biopsy failed in 7 patients (1.9%). SLN detection by peritumoral injection, combined with the systematic removal of the internal mammary SLN, enabled the involvement of this region to be found in a nonnegligible number of patients. Such information should make it possible to personalize treatment for patients with stage cT1 mammary cancer and thereby avoid needless internal mammary radiation therapy in a large number of patients (93.4% in our study). (orig.)

  11. International Symposium on Site Characterization for CO2Geological Storage

    Energy Technology Data Exchange (ETDEWEB)

    Tsang, Chin-Fu

    2006-02-23

    Several technological options have been proposed to stabilize atmospheric concentrations of CO{sub 2}. One proposed remedy is to separate and capture CO{sub 2} from fossil-fuel power plants and other stationary industrial sources and to inject the CO{sub 2} into deep subsurface formations for long-term storage and sequestration. Characterization of geologic formations for sequestration of large quantities of CO{sub 2} needs to be carefully considered to ensure that sites are suitable for long-term storage and that there will be no adverse impacts to human health or the environment. The Intergovernmental Panel on Climate Change (IPCC) Special Report on Carbon Dioxide Capture and Storage (Final Draft, October 2005) states that ''Site characterization, selection and performance prediction are crucial for successful geological storage. Before selecting a site, the geological setting must be characterized to determine if the overlying cap rock will provide an effective seal, if there is a sufficiently voluminous and permeable storage formation, and whether any abandoned or active wells will compromise the integrity of the seal. Moreover, the availability of good site characterization data is critical for the reliability of models''. This International Symposium on Site Characterization for CO{sub 2} Geological Storage (CO2SC) addresses the particular issue of site characterization and site selection related to the geologic storage of carbon dioxide. Presentations and discussions cover the various aspects associated with characterization and selection of potential CO{sub 2} storage sites, with emphasis on advances in process understanding, development of measurement methods, identification of key site features and parameters, site characterization strategies, and case studies.

  12. Quality evaluation of garlic irradiated in Argentine and stored in Brazil

    International Nuclear Information System (INIS)

    Curzio, Osvaldo A.; Croci, Clara A.; Domarco, Rachel E.; Spoto, Marta H.F.; Blumer, Lucimara; Walder, Julio M.M.

    1997-01-01

    This work was undertaken to evaluate the quality of garlic Colorado, irradiated in Argentina and stored for long period of time under environmental conditions in Brazil. Two samples of 100 kg each were selected from high quality garlic harvested in December/1995 from a region close to the Universidad Nacional del Sur. At 30 days after harvesting one of the samples were irradiated with a dose of 60 Gy. Both samples, irradiated and non irradiated, were transported by road from the Laboratorio de Radioisotopos of the Universidad Nacional del Sur, Bahia Blanca, Argentina, to the Centro de Energia Nuclear na Agriculture (CENA-USP), Piracicaba, Sao Paulo, Brazil. The effects of irradiation on weigh loss , discard, germination and sensorial analysis were nonthly observed on CENA among 30and 180 days of storage. The evaluation of germination evidences the benefits of the radioinhibition process. The irradiated bulbs did not exhibit any intern bud, however the non-irradiated bulbs exhibit any intern bud, however the non-irradiated bulbs exhibit any intern bud, however the non-irradiated bulbs exhibit 100% of germination on the period of storage. At the end of the period of storage, the weigh loss of the irradiated garlic was smaller than the non-irradiate one. The percentage of discard, evaluated as intern germination, scatying and whitering, was 43% on the irradiated sample. The analysis of sensorial parameters shows no difference between irradiated and non-irradiated garlic, so irradaition did not affect the sensorial quality of the product. (author). 12 refs., 8 tabs

  13. Food irradiation: Some regulatory and technical aspects

    International Nuclear Information System (INIS)

    1985-10-01

    An Advisory Group by IAEA and FAO on Regulatory and Technological Requirements for Authorization of the Food Irradiation Process was held at IAEA Headquarters in Vienna from 5 to 9 November 1984. The task of the Advisory Group was to advise on the scientific and technological considerations affecting the implementation of the food irradiation process, with particular reference to the facilitation of international trade in irradiated foods and to develop guidance on how the various provisions of the Codex General Standard on Irradiated Foods could be incorporated into national legislation in order to facilitate international trade and avoid the occurence of trade barriers. Separate abstracts were prepared for the various presentations at this meeting

  14. Issues in food irradiation

    International Nuclear Information System (INIS)

    Mills, S.

    1987-04-01

    This discussion paper has two goals: first, to raise public awareness of food irradiation, an emerging technology in which Canada has the potential to build a new industry, mainly oriented to promising overseas markets; and second, to help build consensus among government and private sector decision makers about what has to be done to realize the domestic and export potential. The following pages discuss the potential of food irradiation; indicate how food is irradiated; outline the uses of food irradiation; examine questions of the safety of the equipment and both the safety and nutritional value of irradiated food; look at international commercial developments; assess the current and emerging domestic scene; and finally, draw some conclusions and offer suggestions for action

  15. Improved measurement of aluminum in irradiated fuel reprocessed at the Savannah River Site

    International Nuclear Information System (INIS)

    Maxwell, S.L. III.

    1991-01-01

    At the Savannah River Site (SRS), irradiated fuel from research reactor operators or their contract fuel service companies is reprocessed in the H-Canyon Separations Facility. Final processing costs are based on analytical measurements of the amount of total metal dissolved. Shipper estimates for uranium and uranium-235 and measured values at SRS have historically agreed very well. There have occasionally been significant differences between shipper estimates for aluminum and the aluminum content determined at SRS. To minimize analytical error that might contribute to poor shipper-receiver agreement for the reprocessing of off-site fuel, a new analytical method to measure aluminum was developed by SRS Analytical Laboratories at the Central Laboratory Facilities. An EDTA (ethylenediaminetetraacetic acid) titration method, subject to dissolver matrix interferences, was previously used at SRS to measure aluminum in H-Canyon dissolver during the reprocessing of offsite fuel. The new method combines rapid ion exchange technology with direct current argon plasma spectrometry to enhance the reliability of aluminum measurements for off-site fuel. The technique rapidly removes spectral interferences such as uranium and significantly lowers gamma levels due to fission products. Aluminium is separated quantitatively by using an anion exchange technique that employs oxalate complexing, small particle size resin and rapid flow rates. The new method, which has eliminated matrix interference problems with these analyses and improved the quality of aluminum measurements, has improved the overall agreement between shipper-receiver values for offsite fuel processed SRS

  16. New developments in food irradiation

    International Nuclear Information System (INIS)

    Molins, R.

    1996-01-01

    Food irradiation technology is rapidly gaining worldwide acceptance as a promising tool to help alleviate some important food security and safety concerns, and to facilitate the international trade in food. Because of the different priorities that these issues receive in various countries, food irradiation is being considered by developing countries as the technology of choice over chemical fumigants in applications related to the reduction of food losses such as the insect disinfestation of stored staple and export commodities and the inhibition of sprouting of bulb and tuber crops. In contrast, the use of irradiation as a 'cold pasteurization' method to improve the hygienic quality and safety of foods is emerging as the primary field of application in developed countries. Moreover, the use of irradiation as an alternative, non-chemical quarantine treatment for fresh fruits, vegetables and other agricultural commodities entering international trade will no doubt benefit exporting as well as importing countries. 4 figs

  17. 77 FR 17525 - Cinram Distribution, LLC, a Subsidiary of Cinram International Income Fund, Including On-Site...

    Science.gov (United States)

    2012-03-26

    ... International Income Fund had their wages reported through a separate unemployment insurance (UI) tax account..., a Subsidiary of Cinram International Income Fund, Including On-Site Leased Workers From Good People..., 2012, applicable to workers of Cinram Distribution, LLC, a subsidiary of Cinram International Income...

  18. Development of an irradiation system for a small size continuous run multipurpose gamma irradiator

    International Nuclear Information System (INIS)

    Calvo, W.A.P.; Rela, P.R.; Napolitano, C.M.; Kodama, Y.; Omi, N.M.; Costa, F.E. da; Andradee Silva, L.G. de

    2009-01-01

    The Radiation Technology Center from IPEN-CNEN/SP, Brazil, developed a revolutionary design and national technology, a small-sized continuous run and multipurpose industrial gamma irradiator, to be used as a demonstration facility for manufacturers and contract service companies, which need economical and logistical in-house irradiation system alternatives. Also, to be useful for supporting the local scientific community on development of products and process using gamma radiation, assisting the traditional and potential users on process validation, training and qualification of operators and radioprotection officers. The developed technology for this facility consists of a continuous tote box transport system, comprising a single concrete vault, where the automated transport system of products inside and outside of the irradiator utilizes a rotating door, integrated with the shielding, avoiding the traditional maze configuration. Covering 76 m 2 of floor area, the irradiator design is a product overlap sources and the maximum capacity of cobalt-60 wet sources is 37 PBq. The performed qualification program of this multipurpose irradiator was based on AAMI/ISO 11137 standard, which recommends the inclusion of the following elements: installation and process qualification. The initial load of the multipurpose irradiator was 3.4 PBq with 13 cobalt-60 sources model C-188, supplied by MDS Nordion - Canada. For irradiator dose optimization, the source distribution was done using the software Cadgamma developed by IPEN-CNEN/SP. The polymethylmetacrylate (PMMA) dosimeter system, certified by the International Dose Assurance Service (IDAS) of the International Atomic Energy Agency (IAEA) was used for irradiator dose mapping. The economic analysis, performance concerning with dose uniformity and cobalt-60 utilization efficiency were calculated and compared with other commercial gamma irradiators available on the market. (authors)

  19. EDF requirements for hot cells examinations on irradiated fuel

    International Nuclear Information System (INIS)

    Segura, J.C.; Ducros, G.

    2002-01-01

    The objectives of increasing French Nuclear Power Plants (NPP) availability while lengthening the fuel irradiation cycle and reaching higher burnups lead EDF to carry out on site and hot cell examinations. The data issued from such fuel behaviour monitoring programmes will be used to ascertain that the design criteria are met. Data are also needed for modelling, development and validation. The paper deals quickly with the logistics linked to the selection and transport of fuel rods from NPP to hot cell laboratory. Hot cell PIEs remain a valuable method to obtain data in such fields as PCI (Pellet-Cladding Interaction), internal pressure, FGR (Fission Gas Release), oxide thickness, metallurgical aspects. The paper introduces burnup determination methods, inner pressure evaluation, preparation of samples for further irradiation such as power ramps for PCI and RIA (Reactivity Initiated Accident) testing. The nuclear microprobe of Perre Suee laboratory is also presented. (author)

  20. Food irradiation for phytosanitary and quarantine treatment

    Science.gov (United States)

    Irradiation at doses less than 1 kGy is an effective phytosanitary measure with minimal adverse effects on the quality of most fresh produce. There are internationally recognized guidelines for the use of irradiation as a phytosanitary measure and for the conduct of trade in irradiated fresh produce...

  1. Assessment of necessary regularity of internal irradiation monitoring on the basis of direct and indirect methods of dosimetry

    International Nuclear Information System (INIS)

    Malykhin, V.M.; Ivanova, N.I.

    1981-01-01

    It is shown that when assessing the necessary periodicity of internal irradiation monitoring, it is required to take account of the nature (rhythm) of radionuclide intake to the organism during the monitoring period, the effective period of radionuclide biological half-life, its activity in the organism, sensitivity of the technique applied and the labour-consumig character of the monitoring method [ru

  2. Currently developing opportunities in food irradiation and modern irradiation facilities

    International Nuclear Information System (INIS)

    Wanke, R.

    1997-01-01

    I. Factor currently influencing advancing opportunities for food irradiation include: heightened incidence and awareness of food borne illnesses and causes. Concerns about ensuring food safety in international as well as domestic trade. Regulatory actions regarding commonly used fumigants/pesticides e.g. Me Br. II. Modern irradiator design: the SteriGenics M ini Cell . A new design for new opportunities. Faster installation of facility. Operationally and space efficient. Provides local o nsite control . Red meat: a currently developing opportunity. (Author)

  3. Persistent seroma after intraoperative placement of MammoSite for accelerated partial breast irradiation: Incidence, pathologic anatomy, and contributing factors

    International Nuclear Information System (INIS)

    Evans, Suzanne B.; Kaufman, Seth A.; Price, Lori Lyn; Cardarelli, Gene; Dipetrillo, Thomas A.; Wazer, David E.

    2006-01-01

    Purpose: To investigate the incidence of, and possible factors associated with, seroma formation after intraoperative placement of the MammoSite catheter for accelerated partial breast irradiation. Methods and Materials: This study evaluated 38 patients who had undergone intraoperative MammoSite catheter placement at lumpectomy or reexcision followed by accelerated partial breast irradiation with 34 Gy in 10 fractions. Data were collected regarding dosimetric parameters, including the volume of tissue enclosed by the 100%, 150%, and 200% isodose shells, dose homogeneity index, and maximal dose at the surface of the applicator. Clinical and treatment-related factors were analyzed, including patient age, patient weight, history of diabetes and smoking, use of reexcision, interval between surgery and radiotherapy, total duration of catheter placement, total excised specimen volume, and presence or absence of postprocedural infection. Seroma was verified by clinical examination, mammography, and/or ultrasonography. Persistent seroma was defined as seroma that was clinically detectable >6 months after radiotherapy completion. Results: After a median follow-up of 17 months, the overall rate of any detectable seroma was 76.3%. Persistent seroma (>6 months) occurred in 26 (68.4%) of 38 patients, of whom 46% experienced at least modest discomfort at some point during follow-up. Of these symptomatic patients, 3 required biopsy or complete cavity excision, revealing squamous metaplasia, foreign body giant cell reaction, fibroblasts, and active collagen deposition. Of the analyzed dosimetric, clinical, and treatment-related variables, only body weight correlated positively with the risk of seroma formation (p = 0.04). Postprocedural infection correlated significantly (p = 0.05) with a reduced risk of seroma formation. Seroma was associated with a suboptimal cosmetic outcome, because excellent scores were achieved in 61.5% of women with seroma compared with 83% without seroma

  4. Japan's Siting Process for the Geological Disposal of High-level Radioactive Waste - An International Peer Review

    International Nuclear Information System (INIS)

    Brassinnes, Stephane; Fabbri, Olivier; Rubenstone, James; Seppaelae, Timo; Siemann, Michael; ); Kwong, Gloria; )

    2016-01-01

    The Nuclear Energy Agency carried out an independent peer review of Japan's siting process and criteria for the geological disposal of high-level radioactive waste in May 2016. The review concluded that Japan's site screening process is generally in accordance with international practices. As the goal of the siting process is to locate a site - that is both appropriate and accepted by the community - to host a geological disposal facility for high-level radioactive waste, the international review team emphasises in this report the importance of maintaining an open dialogue and interaction between the regulator, the implementer and the public. Dialogue should begin in the early phases and continue throughout the siting process. The international review team also underlines the importance of taking into account feasibility aspects when selecting a site for preliminary investigations, but suggests that it would be inappropriate to set detailed scientific criteria for nationwide screening at this stage. The team has provided extensive advisory remarks in the report as opportunities for improvement, including the recommendation to use clear and consistent terminology in defining the site screening criteria as it is a critical factor in a successful siting process. (authors)

  5. Guidelines for acceptance of food irradiation

    International Nuclear Information System (INIS)

    1987-09-01

    The purpose of the meeting was to develop an action plan which can be applied in countries with varying philosophies towards food irradiation, but which would help foster a common international attitude to what is undoubtedly a controversial issue. Basic recommendations were to: Identify target groups which influence policy in regard to food irradiation; Establish a cohesive marketing strategy with flexibility to meet varied national needs; Implement an ongoing communications system designed to reach and inform decision-makers; Work in each country through an information ''chain'' commencing with irradiation processors; Promote to - and through - the food industry as potentially the greatest beneficiaries; Set up an administrative ''Clearing House'' in each country to co-ordinate promotion efforts; Assemble ''Seeding Groups'' who will contact and communicate with other organizations; Aim for common international branding and packaging identification for irradiated foods

  6. IFMIF-KEP. International fusion materials irradiation facility key element technology phase report

    International Nuclear Information System (INIS)

    2003-03-01

    The International Fusion Materials Irradiation Facility (IFMIF) is an accelerator-based D-Li neutron source designed to produce an intense neutron field that will simulate the neutron environment of a D-T fusion reactor. IFMIF will provide a neutron flux equivalent to 2 MW/m 2 , 20 dpa/y in Fe, in a volume of 500 cm 3 and will be used in the development and qualification of materials for fusion systems. The design activities of IFMIF are performed under an IEA collaboration which began in 1995. In 2000, a three-year Key Element Technology Phase (KEP) of IFMIF was undertaken to reduce the key technology risk factors. This KEP report describes the results of the three-year KEP activities in the major project areas of accelerator, target, test facilities and design integration. (author)

  7. Safety factors influencing the acceptance of food irradiation technology

    International Nuclear Information System (INIS)

    1989-01-01

    The International Consultative Group on Food Irradiation convened a Task Force Meeting on Public Information of Food Irradiation at the French Commissariat a l'Energie Atomique (CEA), Cadarache from 18 to 21 April 1988. A compilation of scientific papers on subjects of public interest on food irradiation was made by internationally-recognized experts. The report of the meeting and the review papers presented at the meeting are included in this publication. Refs, figs and tabs

  8. Currently developing opportunities in food irradiation and modern irradiation facilities

    Energy Technology Data Exchange (ETDEWEB)

    Wanke, R [Director Business Development. SteriGenics International Inc. 17901 East Warren Avenue No. 4, Detroit, Michigan 48224-1333 (United States)

    1998-12-31

    I. Factor currently influencing advancing opportunities for food irradiation include: heightened incidence and awareness of food borne illnesses and causes. Concerns about ensuring food safety in international as well as domestic trade. Regulatory actions regarding commonly used fumigants/pesticides e.g. Me Br. II. Modern irradiator design: the SteriGenics {sup M}ini Cell{sup .} A new design for new opportunities. Faster installation of facility. Operationally and space efficient. Provides local {sup o}nsite control{sup .} Red meat: a currently developing opportunity. (Author)

  9. Currently developing opportunities in food irradiation and modern irradiation facilities

    Energy Technology Data Exchange (ETDEWEB)

    Wanke, R. [Director Business Development. SteriGenics International Inc. 17901 East Warren Avenue No. 4, Detroit, Michigan 48224-1333 (United States)

    1997-12-31

    I. Factor currently influencing advancing opportunities for food irradiation include: heightened incidence and awareness of food borne illnesses and causes. Concerns about ensuring food safety in international as well as domestic trade. Regulatory actions regarding commonly used fumigants/pesticides e.g. Me Br. II. Modern irradiator design: the SteriGenics {sup M}ini Cell{sup .} A new design for new opportunities. Faster installation of facility. Operationally and space efficient. Provides local {sup o}nsite control{sup .} Red meat: a currently developing opportunity. (Author)

  10. Blood irradiation

    International Nuclear Information System (INIS)

    Chandy, Mammen

    1998-01-01

    Viable lymphocytes are present in blood and cellular blood components used for transfusion. If the patient who receives a blood transfusion is immunocompetent these lymphocytes are destroyed immediately. However if the patient is immunodefficient or immunosuppressed the transfused lymphocytes survive, recognize the recipient as foreign and react producing a devastating and most often fatal syndrome of transfusion graft versus host disease [T-GVHD]. Even immunocompetent individuals can develop T-GVHD if the donor is a first degree relative since like the Trojan horse the transfused lymphocytes escape detection by the recipient's immune system, multiply and attack recipient tissues. T-GVHD can be prevented by irradiating the blood and different centers use doses ranging from 1.5 to 4.5 Gy. All transfusions where the donor is a first degree relative and transfusions to neonates, immunosuppressed patients and bone marrow transplant recipients need to be irradiated. Commercial irradiators specifically designed for irradiation of blood and cellular blood components are available: however they are expensive. India needs to have blood irradiation facilities available in all large tertiary institutions where immunosuppressed patients are treated. The Atomic Energy Commission of India needs to develop a blood irradiator which meets international standards for use in tertiary medical institutions in the country. (author)

  11. The Text of an Agreement for Collaboration in an International Programme on Irradiation of Fruit and Fruit Juices

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1965-08-12

    The text of the Agreement between the Agency, the Osterreichische Studiengesellschaft fuer Atomenergie GmbH and the Organisation for Economic Co-operation and Development for Collaboration in an International Programme on Irradiation of Fruit and Fruit Juices, which was signed on 16 September 1964 and entered into force on 1 January 1965, is reproduced in this document for the information of all Members of the Agency,.

  12. The Text of an Agreement for Collaboration in an International Programme on Irradiation of Fruit and Fruit Juices

    International Nuclear Information System (INIS)

    1965-01-01

    The text of the Agreement between the Agency, the Osterreichische Studiengesellschaft fuer Atomenergie GmbH and the Organisation for Economic Co-operation and Development for Collaboration in an International Programme on Irradiation of Fruit and Fruit Juices, which was signed on 16 September 1964 and entered into force on 1 January 1965, is reproduced in this document for the information of all Members of the Agency,

  13. Development of an irradiation system for a small size continuous run multipurpose gamma irradiator

    International Nuclear Information System (INIS)

    Calvo, Wilson Aparecido Parejo

    2005-01-01

    The Radiation Technology Center from Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), Brazil, developed with a revolutionary design and national technology, a small size continuous run and multipurpose industrial gamma irradiator, to be used as a demonstration facility for manufacturers and contract service companies, which need economical and logistical in-house irradiation system alternatives. Also, to be useful for supporting the local scientific community on development of products and process using gamma radiation, assisting the traditional and potential users on process validation, training and qualification of operators and radioprotection officers. The developed technology for this facility consists of continuous tote box transport system, comprising a single concrete vault, where the automated transport system of products inside and outside of the irradiator utilizes a rotate door, integrated with the shielding, avoiding the traditional maze configuration. Covering 76 m 2 of floor area, the irradiator design is product overlap sources and the maximum capacity of cobalt-60 wet sources is 37 P Bq (1 MCi). The performed quantification program of this multipurpose irradiator was based on AAMI/ISO 11137 standard, which recommends the inclusion of the following elements: installation and process quantification. The initial load of the multipurpose irradiator was 3.4 P Bq (92.1 k Ci) with 13 cobalt-60 sources model C-188, supplied by MDS Nordion Ion Technologies - Canada. For irradiator dose optimization, the source distribution was done using the software Cadgamma developed by IPEN-CNEN/SP. The poly-methylmethacrylate (PMMA) dosimeters system, certified by the International Dose Assurance Service (IDAS) of the International Atomic Energy Agency (IAEA) was used for irradiator dose mapping. The economic analysis, performance concerning to dose uniformity and cobalt-60 utilization efficiency were calculated and compared with other commercial gamma

  14. Description of a Multipurpose Processing and Storage Complex for the Hanford Site's radioactive material

    International Nuclear Information System (INIS)

    Nyman, D.H.; Wolfe, B.A.; Hoertkorn, T.R.

    1993-05-01

    The mission of the US Department of Energy's (DOE) Hanford Site has changed from defense nuclear materials production to that of waste management/disposal and environmental restoration. ne Multipurpose Processing and Storage Complex (MPSC) is being designed to process discarded waste tank internal hardware contaminated with mixed wastes, failed melters from the vitrification plant, and other Hanford Site high-level solid waste. The MPSC also will provide interim storage of other radioactive materials (irradiated fuel, canisters of vitrified high-level waste [HLW], special nuclear material [SNM], and other designated radioactive materials)

  15. The return of food irradiation

    International Nuclear Information System (INIS)

    Hammerton, K.

    1992-01-01

    In discussing the need for food irradiation the author examines the problems that arise in processing foods of different kinds: spices, meat, fruits and vegetables. It is demonstrated that the relatively low dose of radiation required to eliminate the reproductive capacity of the pest can be tolerated by most fruits and vegetables without damage. Moreover the safety of irradiated food is acknowledged by major national and international food organizations and committees. The author agreed that when food irradiation has been approved by a country, consumers should be able to choose between irradiated and non-irradiated food. To enable the choice, clear and unambiguous labelling must be enforced. 13 refs., 1 tab., ills

  16. Conductivity of γ-irradiated LiF

    International Nuclear Information System (INIS)

    Guckelsberger, K.

    1974-01-01

    The conductivity of pure monocrystalline LiF, γ-irradiated, was measured in the temperature range 0.3-100 deg K. The F centers produced by irradiation disperse phonons like point defects, the corresponding fluorine atoms on inter-lattice sites appear as clusters of about 10 A diameter, and high irradiation doses (above 10 8 R) give rise to extensive perturbation zones. Each of these 3 defects influences heat conduction in a characteristic temperature range and may thus be analyzed during irradiation and consecutive recovery [fr

  17. An overview of food irradiation

    International Nuclear Information System (INIS)

    Stevenson, M.H.

    1991-01-01

    This outline survey reviews the subject of food irradiation under the following headings:- brief history, the process (sources, main features of a food processing facility, interaction of radiation with food, main applications of the technology, packaging) consumer concerns (safety, nutritional changes, labelling, detection), international use of food irradiation and legal aspects. (UK)

  18. Summary report of consultants' meeting on IAEA international database on irradiated nuclear graphite properties

    International Nuclear Information System (INIS)

    Humbert, D.; Wickham, A.J.

    2007-06-01

    The '9th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties' was held on 26-27 March 2007 at the IAEA Headquarters, Vienna, Austria. All discussions, recommendations and actions of this Consultants' Meeting are recorded in this report. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database and make recommendations for actions for the next year. This report contains the current status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  19. An international peer review of the programme for evaluating sites for near surface disposal of radioactive waste in Lithuania. Report of the IAEA International Review Team

    International Nuclear Information System (INIS)

    2006-12-01

    Lithuania's national Radioactive Waste Management Agency (RATA) is mandated by national legislation to find a disposal solution for radioactive waste arising mainly from the operation and decommissioning of the Ignalina nuclear power plant. A key step in the process of obtaining a disposal solution is to identify potential sites for detailed consideration. The RATA has completed this first step and is now directing a programme for detailed investigation of these sites. In this context, the RATA requested that the IAEA, on the basis of its statutory mandate to establish safety standards and provide for their application, conduct a peer review of the safety of the proposed disposal concept. The objective of the peer review, carried out in December 2005, was to provide an independent assessment of the safety related aspects of the sites under consideration on the basis of international safety standards and applicable national standards. The review also considered the feasibility of the proposed reference design and its suitability for the local conditions. The peer review provides an independent opinion as to whether the RATA's siting and site characterization programme is consistent with international standards and agrees with good practice in other national disposal programmes. Peer reviews are increasingly being acknowledged as an important component in building broader stakeholder confidence in the safety of facilities. For this reason, an increase in their number and frequency is anticipated. The coming into force of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management has also focused attention on the demonstration of the safety of waste management facilities. This report presents the consensus view of the international group of experts convened by the IAEA to carry out the review. The findings and recommendations of the Review Team were grouped under six topics considered to be of fundamental importance

  20. Food irradiation: an emerging opportunity for African countries

    International Nuclear Information System (INIS)

    Adu-Gyamfi, A.

    2004-01-01

    Full Text. The paper reviews the use of food irradiation technology and its potential in food processing and international trade for economic development of African countries. Provision of infrastructure along with technical expertise, private sector anticipation, effective collaborative ventures and networking with other countries and international agencies are considered crucial for Africa to harness the potential of food irradiation. (author)

  1. IFMIF-KEP. International fusion materials irradiation facility key element technology phase report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-01

    The International Fusion Materials Irradiation Facility (IFMIF) is an accelerator-based D-Li neutron source designed to produce an intense neutron field that will simulate the neutron environment of a D-T fusion reactor. IFMIF will provide a neutron flux equivalent to 2 MW/m{sup 2}, 20 dpa/y in Fe, in a volume of 500 cm{sup 3} and will be used in the development and qualification of materials for fusion systems. The design activities of IFMIF are performed under an IEA collaboration which began in 1995. In 2000, a three-year Key Element Technology Phase (KEP) of IFMIF was undertaken to reduce the key technology risk factors. This KEP report describes the results of the three-year KEP activities in the major project areas of accelerator, target, test facilities and design integration. (author)

  2. Irradiation's potential for preserving food

    International Nuclear Information System (INIS)

    Morrison, R.M.

    1986-01-01

    The first experimental studies on the use of ionizing radiation for the preservation of foods were published over thirty years ago (1, 2) . After a period of high expectations and perhaps exaggerated optimism a series of disappointments occurred in the late '60s .The first company specifically created to operate a food irradiation plant, Newfield Products Inc, ran into financial difficulties and had to close its potato irradiation facility in 1966. The irradiator, designed to process 15,000t of potatoes per month for inhibition of sprouting, was in operation during one season only. In 1968 the US Food an Drug Administration refused approval for radiation-sterilisation of ham and withdrew the approval it had granted in 1963 for irradiated bacon. An International Project on the Irradiation of Fruit and Fruit juices, created in 1965 at Seibersdorf, Austria, with the collaboration or 9 countries, ended with general disappointment after three years. The first commercial grain irradiator, built in the Turkish harbour town of Iskenderun by the International Atomic Energy Agency with funds from the United Nations Development Program, never received the necessary operating licence from the Turkish Government and had to be dismantled in 1968. The US Atomic Energy Commission terminated its financial support to all research programmes on food irradiation in 1970. For a number of years, little chance seemed to remain that the new process would ever be practically used. However, research and development work was continued in a number of laboratories all over the world, and it appears that the temporary setbacks now have been overcome. Growing quantities of irradiated foods are being marketed in several countries and indications are that irradiated foods will eventually be as generally accepted as are frozen, dried or heatsterilised foods

  3. The post-irradiated examination of CANDU type fuel irradiated in the Institute for Nuclear Research TRIGA reactor

    International Nuclear Information System (INIS)

    Tuturici, I.L.; Parvan, M.; Dobrin, R.; Popov, M.; Radulescu, R.; Toma, V.

    1995-01-01

    This post-irradiation examination work has been done under the Research Contract No. 7756/RB, concluded between the International Atomic Energy Agency and the Institute for Nuclear Research. The paper contains a general description of the INR post-irradiation facility and methods and the relevant post-irradiation examination results obtained from an irradiated experimental CANDU type fuel element designed, manufactured and tested by INR in a power ramp test in the 100 kW Pressurised Water Irradiation Loop of the TRIGA 14 MW(th) Reactor. The irradiation experiment consisted in testing an assembly of six fuel elements, designed to reach a bumup of ∼ 200 MWh/kgU, with typical CANDU linear power and ramp rate. (author)

  4. Hemipelvic irradiation for superficial bladder cancer

    International Nuclear Information System (INIS)

    Tashiro, Kazuya; Machida, Toyohei; Ooishi, Yukihiko; Ueda, Masataka; Kido, Akira; Wada, Tetsuro; Yoshigoe, Fukuo; Yamashita, Takashi; Mochizuki, Sachio

    1985-01-01

    In 15 patients with superficial bladder cancer hemipelvic irradiation was performed for prevention of relapse of cancer and decrease in side effects with following results. All patients received TUR-Bt at our department during the six years period from 1978 to 1983. As to stages, one was classified as Ta, 11 as T 1 and 3 as T 2, and pathologic diagnosis was transitional epithelial carcinoma of grade 1 in 1 case, grade 2 in 8 cases and grade 3 in 6 cases. Irradiation was started from the 7 th to 14 th day after TUR-Bt. At first, hemipelvic anterior and posterior field including the field from the affected pelvis to 1 to 2 cm beyond the midline toward the contralateral side and from the aortic bifurcation to the prostatic urethra were irradiated at a dose of 45 Gy. Then, whole bladder field was given an additional rotation irradiation of 20 Gy. The mean observation period was 43 months (ranging from 12 to 79 months) and relapse of cancer was observed in 6 cases out of 15 cases (40%). The site of relapse was in the irradiated site in 2 cases, contralateral site in 3 cases and both side in 1 cases. However, in all of the relapsed cases no aggravation in differential degree or progression in stage was observed. As the side effects, radiation cystitis developed as a delayed damage in 1 case. Thus, although no efficacy for prevention of relapse which we had expected was not seen, this irradiation method effectively inhibited the progression of lesion and development of delayed damage. (author)

  5. Hemipelvic irradiation for superficial bladder cancer

    Energy Technology Data Exchange (ETDEWEB)

    Tashiro, Kazuya; Machida, Toyohei; Ooishi, Yukihiko; Ueda, Masataka; Kido, Akira; Wada, Tetsuro; Yoshigoe, Fukuo; Yamashita, Takashi; Mochizuki, Sachio

    1985-02-01

    In 15 patients with superficial bladder cancer hemipelvic irradiation was performed for prevention of relapse of cancer and decrease in side effects with following results. All patients received TUR-Bt at our department during the six years period from 1978 to 1983. As to stages, one was classified as Ta, 11 as T 1 and 3 as T 2, and pathologic diagnosis was transitional epithelial carcinoma of grade 1 in 1 case, grade 2 in 8 cases and grade 3 in 6 cases. Irradiation was started from the 7 th to 14 th day after TUR-Bt. At first, hemipelvic anterior and posterior field including the field from the affected pelvis to 1 to 2 cm beyond the midline toward the contralateral side and from the aortic bifurcation to the prostatic urethra were irradiated at a dose of 45 Gy. Then, whole bladder field was given an additional rotation irradiation of 20 Gy. The mean observation period was 43 months (ranging from 12 to 79 months) and relapse of cancer was observed in 6 cases out of 15 cases (40%). The site of relapse was in the irradiated site in 2 cases, contralateral site in 3 cases and both side in 1 cases. However, in all of the relapsed cases no aggravation in differential degree or progression in stage was observed. As the side effects, radiation cystitis developed as a delayed damage in 1 case. Thus, although no efficacy for prevention of relapse which we had expected was not seen, this irradiation method effectively inhibited the progression of lesion and development of delayed damage. (author).

  6. Cation disorder in high-dose, neutron-irradiated spinel

    International Nuclear Information System (INIS)

    Sickafus, K.E.; Larson, A.C.; Yu, N.; Nastasi, M.; Hollenberg, G.W.; Garner, F.A.; Bradt, R.C.

    1994-08-01

    The objective of this effort is to determine whether MgAl 2 O 4 spinel is a suitable ceramic for fusion applications. Here, the crystal structures of MgAl 2 O 4 spinel single crystals irradiated to high neutron fluences [>5·10 26 n/m 2 (E n > 0.1 MeV)] were examined by neutron diffraction. Crystal structure refinement of the highest dose sample indicated that the average scattering strength of the tetrahedral crystal sites decreased by ∼ 20% while increasing by ∼ 8% on octahedral sites. Since the neutron scattering length for Mg is considerably larger than for Al, this results is consistent with site exchange between Mg 2+ ions on tetrahedral sites and Al 3+ ions on octahedral sites. Least-squares refinements also indicated that, in all irradiated samples, at least 35% of Mg 2+ and Al 3+ ions in the crystal experienced disordering replacements. This retained dpa on the cation sublattices is the largest retained damage ever measured in an irradiated spinel material

  7. Genetic efficiency of low-dose chronic irradiation in mammals and fish

    International Nuclear Information System (INIS)

    Goncharova, R.; Ryabokon, N.; Smolich, I.; Slukvin, A.

    2001-01-01

    The problem of biological effects of low-dose chronic irradiation is central radiobiological problem and seems to be very important for human monitoring and risk assessment Since 1986 we are engaged in studying genetic effects of low-dose chronic irradiation in natural populations of small mammals (bank vole - Clethrioiiomys glareolus) inhabiting radiocontaminated monitoring sites, in laboratory hybrid mice CBA*C57BI/6 j exposed to chronic irradiation at radiocontaminated sites, as well as in pond carp (Cyprinus carpio) reared in fish farms in areas contaminated due to the Chernobyl accident. The mean ground depositions in monitoring sites were 8-2330 kBq/m 2 and the mean bottom depositions in ponds were 52-3235 Bq/kg for Cs 137. We used conventional cytogenetics and genetics tests [1-3] and the following approaches in studying on genetic effects of low-dose chronic irradiation: Radiation exposures from external γ- and internal α, β, γ-irradiation from incorporated radionuclides were estimated for each specimen tested. Regression analysis of dose-effect relationships based on comparison of individual genetic end-points with individual absorbed doses was carried out We observed statistically significant changes in the frequencies of genetic end-points, which have been studied in somatic and germ cells, as well as in embryos of irradiated mammals and fish. So, the frequencies of chromosome aberrations in bank vole populations had up to 7-fold increase in comparison with background and pre-accident levels. It is of great importance to emphasize high radio-sensitivity of fertilized eggs (zygotes) and pond carp, embryos produced by chronically irradiated parents. Regression analysis allowed to reveal dependence of the studied parameters' frequencies on radiation exposure namely on the concentrations of basic dose forming radionuclides, absorbed dose rate and whole body absorbed dose. In most cases, dose-effect relationships were better approximated by non

  8. The response of peripheral blood and bone marrow to combined irradiation

    International Nuclear Information System (INIS)

    Yakovleva, N.G.; Zhorno, L.Ya.

    1975-01-01

    Biological effects were examined in rats after X irradiation, oral administration of 90 Sr and 144 Ce as well as combined exposure to X radiation and internal contamination with both radionuclides. Morphological changes of the peripheral blood and the frequency of aberrant mitoses in bone marrow cells were used as criteria. In the case of combined radiation exposure three periods were observed with regard to blood changes. The first period was characterized by changes caused by external irradiation, the second one was a short-term period of normalization, and during the last period additive effects of external and internal irradiation were observed. Considering the changes of the frequency of aberrant mitoses only two periods could be detected according to the effects of external and internal irradiation. It is pointed out that in the case of combined irradiation the acute radiation syndrome caused by external irradiation gradually changes into a chronic stage associated with the long-term retention of radionuclides. (author)

  9. Educative campaign about information on irradiated foods

    International Nuclear Information System (INIS)

    Luna C, P.C.

    1991-07-01

    The irradiation of foods is accepted by international agencies (FAO, OMS) like a healthy and effective technology at the moment the irradiated foods are marketed easily in many countries, however in other countries exist several factors that affect the practical application of this process. In this work is planned about an educational campaign about the irradiation process directed to the consumers. (Author)

  10. Irradiation behavior evaluation of oxide dispersion strengthened ferritic steel cladding tubes irradiated in JOYO

    Energy Technology Data Exchange (ETDEWEB)

    Yamashita, Shinichiro, E-mail: yamashita.shinichiro@jaea.go.jp; Yano, Yasuhide; Ohtsuka, Satoshi; Yoshitake, Tsunemitsu; Kaito, Takeji; Koyama, Shin-ichi; Tanaka, Kenya

    2013-11-15

    Irradiation behavior of ODS steel cladding tubes was evaluated for the further progress in understanding of the neutron-irradiation effects on ODS steel. Two types of ODS (9Cr–ODS{sub F}/M, 12Cr–ODS{sub F}) steel cladding tubes with differences in basic compositions and matrix phases were irradiated in JOYO. Post-irradiation examination data concerning hardness, ring tensile property, and microstructure were obtained. Hardness measurement after irradiation showed that there was an apparent irradiation temperature dependence on hardness for 9Cr–ODS{sub F}/M steel whereas no distinct temperature dependence for 12Cr–ODS{sub F} steel. Also, there was no significant change in tensile strengths after irradiation below 923 K, but those above 1023 K up to 6.6 × 10{sup 26} n/m{sup 2} (E > 0.1 MeV) were decreased by about 20%. TEM observations showed that the radiation-induced defect cluster formation during irradiation was suppressed because of high density sink site for defect such as initially-existed dislocation, and precipitate interfaces. In addition, oxide particles were stable up to the maximum doses of this irradiation test.

  11. Localizing by autoradiography at -195 deg radioactive areas in rats exposed to a high flux of thermal neutrons, importance of phosphorus 32 in consecutive internal irradiation; Localisation par autoradiographie a -195 deg des zones radioactives chez le rat expose a un haut flux de neutrons thermiques, importance du phosphore 32 dans l'irradiation interne consecutive

    Energy Technology Data Exchange (ETDEWEB)

    Chanteur, J; Pellerin, P [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1961-07-01

    Rats weighing 25 g were exposed for 5 mn to a flux of 6.10{sup 12} thermal neutrons/cm{sup 2}/s. Anatomical autoradiography at -195 deg. C has enabled the radioactive organs to be easily localised, to follow in course of time the decrease of radioactivity, and from it to deduce the probable nature of the numerous emitters in question. In particular, the phosphorus 32 has thus appeared to be one of those responsible for internal irradiation, general, on the one hand, by activating cellular phosphorus, local, on the other, by activating bony phosphates. Owing to this, an accidental irradiation by neutrons might have consequences that are both somatic (elective irradiation of the bone marrow) and genetic (activation of nucleic acids). The gamma spectrometry has confirmed the nature of certain other emitters. (author) [French] Des rats de 25 g ont ete exposes pendant 5 mn a un flux de 6.10{sup 12} neutrons thermiques/cm{sup 2}/s. L'autoradiographie anatomique a -195 deg. C a permis de localiser facilement les organes radioactifs, de suivre dans le temps la decroissance de la radioactivite, et d'en deduire la nature probable des nombreux emetteurs en cause. En particulier, le phosphore 32 est ainsi apparu comme l'un des responsables de l'irradiation interne, d'une part generale par activation du phosphore cellulaire, d'autre part locale par activation des phosphates osseux. Une irradiations accidentelle par neutrons aurait, de ce fait, des consequences a la fois somatiques (irradiation elective de la moelle osseuse) et genetiques (activation des acides nucleiques). La spectrometrie gamma a confirme la nature de certains autres emetteurs. (auteur)

  12. Legal, administrative and psychological barriers to the industrial application of food irradiation and the trade in irradiated food

    International Nuclear Information System (INIS)

    Cornelis, J.C.

    1978-01-01

    As a result of the recent evaluations of a joint FAO/IAEA/WHO Expert Committee almost all scientific hesitations against the use of irradiation for the preservation of food have been removed. This opens wide perspectives for the augmentation of the quantity of food available for consumption. This also offers great possibilities for less-developed countries with an agricultural economy to export products to the developed countries. Two obstacles to the internationalization of trade in irradiated food remain, however. Only if these last obstacles are removed will food irradiation be able to play an important role. The first obstacle is that no simple test exists to determine whether a food item has been irradiated and with what dose. The second obstacle is the public acceptance of irradiated food, as the public is highly sensitive to imagined or real dangers associated with the word radiation. Ways are suggested for overcoming both obstacles, stressing the importance of international cooperation and international organizations such as the IAEA, FAO and WHO. (author)

  13. Intense neutron irradiation facility for fusion reactor materials

    Energy Technology Data Exchange (ETDEWEB)

    Noda, Kenji; Oyama, Yukio; Kato, Yoshio; Sugimoto, Masayoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-03-01

    Technical R and D of d-Li stripping type neutron irradiation facilities for development of fusion reactor materials was carried out in Fusion Materials Irradiation Test Facility (FMIT) project and Energy Selective Neutron Irradiation Test Facility (ESNIT) program. Conceptual design activity (CDA) of International Fusion Materials Irradiation Facility (IFMIF), of which concept is an advanced version of FMIT and ESNIT concepts, are being performed. Progress of users` requirements and characteristics of irradiation fields in such neutron irradiation facilities, and outline of baseline conceptual design of IFMIF were described. (author)

  14. Multi-Institution Prospective Trial of Reduced-Dose Craniospinal Irradiation (23.4 Gy) Followed by Conformal Posterior Fossa (36 Gy) and Primary Site Irradiation (55.8 Gy) and Dose-Intensive Chemotherapy for Average-Risk Medulloblastoma

    International Nuclear Information System (INIS)

    Merchant, Thomas E.; Kun, Larry E.; Krasin, Matthew J.; Wallace, Dana; Chintagumpala, Murali M.; Woo, Shiao Y.; Ashley, David M.; Sexton, Maree; Kellie, Stewart J.; Ahern, Verity M.B.B.S.; Gajjar, Amar

    2008-01-01

    Purpose: Limiting the neurocognitive sequelae of radiotherapy (RT) has been an objective in the treatment of medulloblastoma. Conformal RT to less than the entire posterior fossa (PF) after craniospinal irradiation might reduce neurocognitive sequelae and requires evaluation. Methods and Materials: Between October 1996 and August 2003, 86 patients, 3-21 years of age, with newly diagnosed, average-risk medulloblastoma were treated in a prospective, institutional review board-approved, multi-institution trial of risk-adapted RT and dose-intensive chemotherapy. RT began within 28 days of definitive surgery and consisted of craniospinal irradiation (23.4 Gy), conformal PF RT (36.0 Gy), and primary site RT (55.8 Gy). The planning target volume for the primary site included the postoperative tumor bed surrounded by an anatomically confined margin of 2 cm that was then expanded with a geometric margin of 0.3-0.5 cm. Chemotherapy was initiated 6 weeks after RT and included four cycles of high-dose cyclophosphamide, cisplatin, and vincristine. Results: At a median follow-up of 61.2 months (range, 5.2-115.0 months), the estimated 5-year event-free survival and cumulative incidence of PF failure rate was 83.0% ± 5.3% and 4.9% ± 2.4% (± standard error), respectively. The targeting guidelines used in this study resulted in a mean reduction of 13% in the volume of the PF receiving doses >55 Gy compared with conventionally planned RT. The reductions in the dose to the temporal lobes, cochleae, and hypothalamus were statistically significant. Conclusion: This prospective trial has demonstrated that irradiation of less than the entire PF after 23.4 Gy craniospinal irradiation for average-risk medulloblastoma results in disease control comparable to that after treatment of the entire PF

  15. Experience from the transportation of irradiated WWER-440 fuel assemblies at the Kozloduy NPP site after a short cooling time

    International Nuclear Information System (INIS)

    Stoyanova, I.; Kamenov, A.; Byrzev, L.; Christoskov, I.

    2003-01-01

    Results from the analysis and experimental verification of the radiation and shielding characteristics of non-standard loading patterns of the VSPOT transport cask used for transportation of irradiated fuel assemblies after a short cooling time (120 180 days) on the site of the Kozloduy NPP are presented. An additional safety criterion related to the introduced modifications to the standard procedure of using the transport cask is formulated and discussed (Authors)

  16. Reduced cost design of liquid lithium target for international fusion material irradiation facility (IFMIF)

    International Nuclear Information System (INIS)

    Nakamura, Hiroo; Ida, Mizuho; Sugimoto, Masayoshi; Takeuchi, Hiroshi; Yutani, Toshiaki

    2001-01-01

    The International Fusion Materials Irradiation Facility (IFMIF) is being jointly planned to provide an accelerator-based D-Li neutron source to produce intense high energy neutrons (2 MW/m 2 ) up to 200 dpa and a sufficient irradiation volume (500 cm 3 ) for testing the candidate materials and components up to about a full lifetime of their anticipated use in ITER and DEMO. To realize such a condition, 40 MeV deuteron beam with a current of 250 mA is injected into high speed liquid lithium flow with a speed of 20 m/s. Following Conceptual Design Activity (1995-1998), a design study with focus on cost reduction without changing its original mission has been done in 1999. The following major changes to the CAD target design have been considered in the study and included in the new design: i) number of the Li target has been changed from 2 to 1, ii) spare of impurity traps of the Li loop was removed although the spare will be stored in a laboratory for quick exchange, iii) building volume was reduced via design changes in lithium loop length. This paper describes the reduced cost design of the lithium target system and recent status of Key Element Technology activities. (author)

  17. Luminescence detection of irradiated foods

    International Nuclear Information System (INIS)

    Sanderson, D.C.W.

    1990-01-01

    The need for forensic tests to identify irradiated foods has been widely recognised at a time of growing international trade in such products and impending changes in UK and EEC legislation to control the process. This paper outlines the requirements for and of such tests, and discusses recent developments in luminescence approaches aimed at meeting the needs of public analysts, retailers and consumers. Detecting whether or not food has been irradiated, and if so to what dose, is one of the challenges which food irradiation poses to the scientist. (author)

  18. Lethal mutation of internal irradiation brown planthopper (Nilaparvita lugens Stal)

    International Nuclear Information System (INIS)

    Wahid, R.A.

    1988-01-01

    The moulting IVth of BPH nympha were irradiated internally with radiophosphorous 32-P 1 uCi/ml, 10 uCi/ml, 50 uCi/ml, 100 uCi/ml, and 500 uCi/ml concentrations respectivelly. An observation was carried out to determines heredity of hopper sterilities from the mating groups of R male x N female, R male x R female, and N male x R female. The 32-P concentration below of 50 uCi/ml seemed to be the substerile dose, however, the dominant lethal mutation has been visually shown by R male x R female F1 mating group. The hereditary lines of F1, F2, F3, and F4 of the hopper sterilities wich were indicated by the nympha hatch ability have some significant correlations (r1= -0.77, r2= -0.92, r3= -0.93 and r4= -0.85). Thus, the resesif lethal mutations visually showed by F3 and F4 from all of the 100 uCi/ml and 50 uCi/ml treated groups. (author). 10 refs, 2 figs, 2 tabs

  19. Economics of gamma irradiation processing

    International Nuclear Information System (INIS)

    Tani, Toshio

    1980-01-01

    The gamma-ray irradiation business started at the Takasaki Laboratory of Japan Atomic Energy Research Institute. The irradiation facilities were constructed thereafter at various sites. The facilities must accept various types of irradiation, and must be constructed as multi-purpose facilities. The cost of irradiation consists of the cost of gamma sources, construction expense, personnel expense, management expense, and bank interest. Most of the expenses are considered to be fixed expense, and the amount of irradiation treatment decides the original costs of work. The relation between the irradiation dose and the construction expense shows the larger facility is more economical. The increase of amount of treatment reduces the original cost. The utilization efficiency becomes important when the amount of treatment and the source intensity exceed some values. The principal subjects of gamma-ray irradiation business are the sterilization of medical tools and foods for aseptic animals, the improvement of quality of plastic goods, and the irradiation of foods. Among them, the most important subject is the sterilization of medical tools. The cost of gamma irradiation per m 3 in still more expensive than that by ethylene oxide gas sterilization. However, the demand of gamma-ray irradiation is increasing. For the improvement of quality of plastic goods, electron irradiation is more favourable than the gamma irradiation. In near future, the economical balance of gamma irradiation can be achieved. (Kato, T.)

  20. Recent world-wide advances in irradiation of food and its identification

    International Nuclear Information System (INIS)

    Uchiyama, Sadao; Saito, Yukio

    1991-01-01

    Irradiation (ionizing radiation) of various foods is growing in popularity internationally. For example, it is used as a substitute for the use of post-harvest pesticides. This trend has served to intensify research on the identification of irradiated foods. The first Research Co-ordinated Meeting on Analytical Detection Method for Irradiated Foods was held in Poland under the sponsorship of FAO/IAEA in 1990 in order to solve problems related to the international trade of irradiated foods and to ensure their correct labelling in the market. In this review, the world-wide advances in the irradiation of food and its identification are introduced and discussed. (author)

  1. Recent progress in food irradiation in Korea

    International Nuclear Information System (INIS)

    Joong-ho Kwon

    1988-01-01

    This paper discusses progress in research into food irradiation and government approval of the process in Korea. The development of the first cobalt-60 food irradiator is described and the role of international, trade and consumer associations in its commercialization discussed. (U.K.)

  2. Extracorporeal irradiation -Physicist perspective

    International Nuclear Information System (INIS)

    Vijayaprabhu, N.; Saravanan, K.S.; Gunaseelan; Vivekanandam, S.; Reddy, K.S.; Parthasarathy; Mourougan, S.; Elangovan, K.

    2008-01-01

    Extracorporeal irradiation (ECI) involves irradiation of body tissues, particularly malignant bones of the extremities, outside the body. This involves en bloc resection of the tumour, extracorporeal irradiation of the bone segment with a single dose of 50 Gy or more, and reimplantation of the irradiated bone with fixation devices. Bone tumours like Ewing's Sarcoma, Chondrosarcoma and Oesteosarcoma; in the involved sites like femur, tibia, humerus, ilium and sacrum can be treated with ECI. The reimplanted bone simply acts as a framework for appositional bone growth from surrounding healthy bones. The conventional indications for postoperative irradiation are still applied. The major advantages of ECI are the precise anatomic fit of the reimplanted bone segment, preservation of joint mobility and its potential in avoiding the growth discrepancy commonly seen in prosthetic replacement. The use of ECI was first described in 1968 and practiced in Australia since 1996. In our center, we have completed six ECIs

  3. Development of Irradiation Procedure for Gamma Irradiation Chamber Bio beam GM 8000

    International Nuclear Information System (INIS)

    Shuhaimi Shamsudin; Affrida Abu Hassan; Zaiton Ahmad; Abdul Rahim Harun; Ahmad Zainuri Mohd Dzomir

    2015-01-01

    Bio Beam GM 8000 gamma irradiation chamber obtained a conditional approval to operate on March 27, 2012, and later acquired a full approval on December 13, 2012. The objective for the procurement of this gamma chamber is to develop an acute irradiation facility for biological samples, including plants tissues, insects, pupae, microorganisms, as well as animal and human cells. To ensure a smooth and efficient operation, irradiation procedures were developed and improved over time. This paper discusses the operation and management of the Bio Beam GM 8000 facility, including irradiation procedures and sample preparation, application for services through online e-client system, consultancy, quality assurance and information dissemination to internal as well as external clients. In addition, this paper also discusses the potential, constraints and improvement measures taken to optimize the use of this facility in order to meet its objectives. (author)

  4. High-dose irradiation of food

    International Nuclear Information System (INIS)

    Diehl, J.F.

    1999-01-01

    Studies performed on behalf of the International Project on Food Irradiation in the period from 1971 until 1980 resulted in the concluding statement that ''.the irradiation of any food commodity up to an overall average dose of 10 kGy presents no toxicological hazard; hence, toxicological testing of foods so treated is no longer required.'' Since then, licenses for food irradiation have been restricted to this maximum dose in any country applying this technology. Further testing programmes have been carried out investigating the wholesomeness or hazards of high-dose irradiation, but there has been little demand so far by the food industry for licensing of high-dose irradiation, as there is only a small range of products whose irradiation at higher doses offers advantages for given, intended use. These include eg. spices, dried herbs, meat products in flexible pouch packagings for astronauts, or patients with immune deficiencies. (orig./CB) [de

  5. Irradiation creep models - an overview

    International Nuclear Information System (INIS)

    Matthews, J.R.; Finnis, M.W.

    1988-01-01

    The modelling of irradiation creep is now highly developed but many of the basic processes underlying the models are poorly understood. A brief introduction is given to the theory of cascade interactions, point defect clustering and dislocation climb. The range of simple irradiation creep models is reviewed including: preferred nucleation of interstitial loops; preferred absorption of point defects by dislocations favourably orientated to an applied stress; various climb-enhanced glide and recovery mechanisms, and creep driven by internal stresses produced by irradiation growth. A range of special topics is discussed including: cascade effects; creep transients; structural and induced anisotropy; and the effect of impurities. The interplay between swelling and growth with thermal and irradiation creep is emphasized. A discussion is given on how irradiation creep theory should best be developed to assist the interpretation of irradiation creep observations and the requirements of reactor designers. (orig.)

  6. Investigation of food irradiation technology for application to plant quarantine. Working group report of food irradiation technology

    Energy Technology Data Exchange (ETDEWEB)

    Sunaga, Hiromi; Ito, Hitoshi; Takatani, Yasuyuki; Takizawa, Haruki; Yotsumoto, Keiichi; Tanaka, Ryuichi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; Hirano, Tsuyoshi; Tokunaga, Okihiro

    1999-06-01

    The commercialization of food irradiation in Japan was started in 1973 for the sprout inhibition of potatoes as the first successful food irradiation facility in the world. Since approval of potato irradiation, no items has been commercialized in Japan. However, international agreement for phase out of methyl bromide after 2005 and increasing incidences of foodborn diseases such as by Escherichia coli O157:H7 are forcing to have interesting to food irradiation. Takasaki Radiation Chemistry Research Establishment has long experiences on research of irradiation effect and engineering of food irradiation in Japan. From these back ground, working group of food irradiation was organized at August 1997 by some members of Department of Radiation Research for Environment and Resources and Advanced Technology Center for supporting technically on commercialization of food irradiation. This report presents the result of discussion in working group on generalization up to date researches of food irradiation, application fields and items, technical problems and future prospects of this technology in Japan. (author)

  7. Low cycle fatigue of irradiated LMFBR materials

    International Nuclear Information System (INIS)

    Blackburn, L.D.

    1976-01-01

    A review of low cycle fatigue data on irradiated LMFBR materials was conducted and extensive graphical representations of available data are presented. Representative postirradiation tensile properties of annealed 304 and 316 SS are selected and employed in several predictive methods to estimate irradiated material fatigue curves. Experimental fatigue data confirm the use of predictive methods for establishing conservative design curves over the range of service conditions relevant to such CRBRP components as core former, fixed radial shielding, core barrel, lower inlet module and upper internals structures. New experimental data on fatigue curves and creep-fatigue interaction in irradiated 20 percent cold worked (CW) 316 SS and Alloy 718 would support the design of removable radial shielding and upper internals in CRBRP. New experimental information on notched fatigue behavior and cyclic stress-strain curves of all these materials in the irradiated condition could provide significant design data

  8. Food irradiation: advantages and limitations

    International Nuclear Information System (INIS)

    Hernandes, N.K.; Vital, H. de C.; Sabaa-Srur, A.U.O.

    2003-01-01

    Food irradiation is a physical method of processing food (e.g. freezing, canning). It has been thoroughly researched over the last four decades and is recognized as a safe and wholesome method. It has the potential both of disinfesting dried food to reduce storage losses and disinfesting fruits and vegetables to meet quarantine requirements for export trade. Low doses of irradiation inhibit spoilage losses due to sprouting of root and tuber crops. Food- borne diseases due to contamination by pathogenic microorganisms and parasites of meat, poultry, fish, fishery products and spices are on the increase. Irradiation of these solid foods can decontaminate them of pathogenic organisms and thus provide safe food to the consumer. Irradiation can successfully replace the fumigation treatment of cocoa beans and coffee beans and disinfest dried fish, dates, dried fruits, etc. One of the most important advantages of food irradiation processing is that it is a coldprocess which does not significantly alter physico-chemical characters of the treated product. It can be applied to food after its final packaging. Similar to other physical processes of food processing, (e.g. canning, freezing), irradiation is a capital intensive process. Thus, adequate product volume must be made available in order to maximize the use of the facility and minimize the unit cost of treatment. Lack of harmonization of regulations among the countries which have approved irradiated foods hampers the introduction of this technique for international trade. Action at the international level has to be taken in order to remedy this situation. One of the important limitations of food irradiation processing is its slow acceptance by consumers, due inter alia to a perceived association with radioactivity. The food industry tends to be reluctant to use the technology in view of uncertainties regarding consumer acceptance of treated foods. Several market testing and consumer acceptance studies have been carried

  9. Fuel irradiation experience at Halden

    International Nuclear Information System (INIS)

    Vitanza, Carlo

    1996-01-01

    The OECD Halden Reactor Project is an international organisation devoted to improved safety and reliability of nuclear power station through an user-oriented experimental programme. A significant part of this programme consists of studies addressing fuel performance issues in a range of conditions realised in specialised irradiation. The key element of the irradiation carried out in the Halden reactor is the ability to monitor fuel performance parameters by means of in-pile instrumentation. The paper reviews some of the irradiation rigs and the related instrumentation and provides examples of experimental results on selected fuel performance items. In particular, current irradiation conducted on high/very high burn-up fuels are reviewed in some detail

  10. Food irradiation and combination processes

    International Nuclear Information System (INIS)

    Campbell-Platt, G.; Grandison, A.S.

    1990-01-01

    International approval of food irradiation is being given for the use of low and medium doses. Uses are being permitted for different categories of foods with maximum levels being set between 1 and 10 kGy. To maximize the effectiveness of these mild irradiation treatments while minimizing any organoleptic quality changes, combination processes of other technologies with irradiation will be useful. Combinations most likely to be exploited in optimal food processing include the use of heat, low temperature, and modified-atmosphere packaging. Because irradiation does not have a residual effect, the food packaging itself becomes an important component of a successful process. These combination processes provide promising alternatives to the use of chemical preservatives or harsher processing techniques. (author)

  11. Food Irradiation Newsletter. V. 11, no. 2

    International Nuclear Information System (INIS)

    1987-09-01

    This issue includes a report of the ICGFI's Workshop on Food Irradiation for Food Control Officials, convened in Budapest, Hungary, May 1987. To provide further assurance on the safety and wholesomeness of irradiated food in general and details about polyploidy (increase in number of chromosomes) resulting from consumption of freshly irradiated wheat in particular, ICGFI Secretariat issued a fact sheet on ''Safety and Wholesomeness of Irradiated Foods: International Status - Facts and Figures'' to its member countries in July 1987. The Newsletter also contains summary reports of two important market testings of irradiated food, i.e. papaya in California in March and strawberries in France in June, which proved that consumers will buy irradiated foods, and status reports on food irradiation in France and Mexico. Ref, 1 tab

  12. Sensory quality of irradiated onion and garlic bulbs

    International Nuclear Information System (INIS)

    Curzio, O.A.; Urioste, A.M.

    1994-01-01

    The radioinhibition process has shown to prolong shelf-life of ''Valenciana sintetica 14'' onion variety and ''Colorado'' garlic variety. Sensory attributes of the irradiated bulbs were tested monthly by trained judges during extended storage in warehouse conditions (6-32C, R.H. 40-50%). The sensory properties observed were external and internal appearance, firmness and odor. The irradiated bulbs were judged to be superior in quality with respect to internal and external appearance (p 0.01) and firmness (p 0.01), after 180 days postharvest. The irradiated bulbs showed no difference in odor (p 0.05), when compared to unirradiated ones, through the storage period

  13. Repair-welding technology of irradiated materials - WIM project

    International Nuclear Information System (INIS)

    Nakata, K.; Oishi, M.

    1998-01-01

    A new project on the development of repair-welding technology for core internals and reactor (pressure) vessel, consigned by the Ministry of International Trade and Industry (MITI), has been started from October 1997. The objective of the project is classified into three points as follows: (1) to develop repair-welding techniques for neutron irradiated materials, (2) to prove the availability of the techniques for core internals and reactor (pressure) vessel, and (3) to recommend the updated repair-welding for the Technical Rules and Standards. Total planning, neutron irradiation, preparation of welding equipment are now in progress. The materials are austenitic stainless steels and a low alloy steel. Neutron irradiation is performed using test reactors. In order to suppress the helium aggregation along grain boundaries, low heat input welding techniques, such as laser, low heat input TIG and friction weldings, will be applied. (author)

  14. Food Irradiation Newsletter. Vol. 15, no. 1

    International Nuclear Information System (INIS)

    1991-05-01

    This Newsletter contains reports of the Final FAO/IAEA Research Coordination Meeting (RCM) on the Latin American Regional Cooperative Programme on Food Irradiation, the first FAO/IAEA RCM of the Research Coordination Programme on Analytical Detection Methods for Irradiation Treatment of Foods, and the final FAO/IAEA RCM on the Use of Irradiation as a Quarantine Treatment of Food and Agriculture Commodities. Also included are excerpts of the Seventh Annual Meeting of the International Consultative Group on Food Irradiation (ICGFI) and a summary of an ICGFI Task Force Meeting on Irradiation as a Quarantine Treatment of Fresh Fruits and Vegetables. The new regulations on food irradiation in the United Kingdom, effective 1 January 1991, are summarized

  15. Internal friction of Fe-B alloys neutron irradiated at low temperature

    International Nuclear Information System (INIS)

    Kitajima, Kazunori; Futagami, Koji; Abe, Hironobu; Yoshida, Hiroyuki.

    1975-01-01

    Measurements were made on the internal friction of Fe-B alloys irradiated by neutron at 16 0 K to the dose of 3x10 16 nvt (>1 MeV) and 6x10 17 nvt (thermal). Boron was used to enhance the production of defects by the nuclear transformation B 10 (n,α)Li 7 . Relaxation peaks were found in specimens containing dispersed fine precipitates of NbB 2 in range of B 500--7200 wt ppm and Nb 2000--30000 wt ppm. The most prominent peak is the one with the peak temperature of 169 0 K at the frequency of 264 c/sec. Activation energy determined from the peak shift is 0.28+-0.01 eV, which is nearly equal to that of migration of self-interstitial reported on pure iron. However activation energy of the decay of peaks by annealing is about 0.7 eV. Interpretation was presented that the peak may be attributed to re-orientation of self-interstitials loosely bound to a boron atom. (auth.)

  16. Present and future of food irradiation in China

    International Nuclear Information System (INIS)

    Chen Hao; Cai Jiming; Pan Pingchuan; Liu Ge

    2006-01-01

    The treatment of foods and agricultural products by irradiation technology in China has become an increasingly accepted practice and has been recognized as a public health intervention measure for controling pathogenic microbes and pests on foods since early 1980s. This paper gives an outline on the history and the current status of food irradiation in China, including the research interest, commercial application, public acceptance, regulations and hygienic standards of irradiated foods, and the irradiation facilities for food irradiation. The newly finished or scheduled irradiation facilities in China up to 2007 are introduced. And problems with the food irradiation studies, especially in analysis of food quality during irradiation, the implementation of GMP and HACCP in the food irradiation production and harmonization of food irradiation regulations with international standards, are also discussed. (authors)

  17. The IAEA's WorldAtom Internet site: International news and information services

    International Nuclear Information System (INIS)

    Kyd, D.R.

    2000-01-01

    The International Atomic Energy Agency (IAEA) provides news and public information services via the Internet through its WorldAtom home page. The page is accessible at www.iaea.org/worldatom. Following are brief highlights of the items available on the site by clicking Press Centre, Reference Centre, or other links: Daily Press Review: Summaries of selected news items pertaining to global nuclear developments and the IAEA's work are provided each day, drawing upon a wide range of global media sources. IAEA NewsBriefs: Regularly featured are updates about IAEA activities related to areas of safety, technology transfer, and nuclear safeguards. Meetings and training courses: News about IAEA-sponsored symposia, seminars, and other meetings, as well as information about international meetings on atomic energy sponsored by other organizations, are updated on a daily basis. Press releases and statements: All IAEA press releases and media advisories since 1995 are accessible on the site. Topical and feature pages: In-depth coverage and links to information resources within and outside the IAEA are regularly given to selected topics of high international interest involving the IAEA. IAEA publications: listings and overviews of IAEA technical reports, safety standards, and other publications are updated as they are issued. Scientific and technical information: WorldAtom includes links (Reference Centre) to the International Nuclear Information System, IAEA's extensive bibliographic database of references and resources, to the nuclear database, and to departmental pages at IAEA that focus on IAEA programs and activities. IAEA documents: Electronic versions of official IAEA documents are added as they are issued. These documents include the texts and status lists of international conventions under IAEA auspices; IAEA information circulars to member states; IAEA annual reports (since 1995); and background reports and documents for the IAEA General Conference related to

  18. Present status and subjects of food irradiation in the world

    International Nuclear Information System (INIS)

    Hayashi, Toru

    1995-01-01

    Food irradiation is the technology of irradiating such radiations as gamma ray and electron beam to foods and farm products, and its objectives are the prevention of germination of potatoes and onions, the insecticide of cereals and fruits, the adjustment of the ripeness of fruits and vegetables, the sterilization of chickens and spices and so on. The food irradiation as the technology for preventing the loss of foods, the food irradiation as the substitute for the fumigation with chemicals and the food irradiation for improving food sanitation are discussed. The history of the soundness test of irradiated foods and the opinion of the international organizations are described. The safety evaluation in view of poisonous effect, nutrition and microorganisms is carried out, and the safety of the foods irradiated with the dose less than 10 kGy has been proved. The examples of utilizing food irradiation for sterilization, insecticide and germination prevention are shown. The present status of its practical use in America and Europe and the move of such international organizations as IAEA, FAO and WHO are reported. (K.I.)

  19. Packing for food irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Chmielewski, A G [Institute of Nuclear Chemistry and Technology, Warsaw (Poland)

    2006-07-01

    Joint FAO/IAEA/WHO Expert Committee approved the use of radiation treatment of foods. Nowadays food packaging are mostly made of plastics, natural or synthetic, therefore effect of irradiation on these materials is crucial for packing engineering for food irradiation technology. By selecting the right polymer materials for food packaging it can be ensured that the critical elements of material and product performance are not compromised. When packaging materials are in contact with food at the time of irradiation that regulatory approvals sometimes apply. The review of the R-and-D and technical papers regarding material selection, testing and approval is presented in the report. The most information come from the USA where this subject is well elaborated, the International Atomic Energy Agency (IAEA) reports are reviewed as well. The report can be useful for scientists and food irradiation plants operators. (author)

  20. Packing for food irradiation

    International Nuclear Information System (INIS)

    Chmielewski, A.G.

    2006-01-01

    Joint FAO/IAEA/WHO Expert Committee approved the use of radiation treatment of foods. Nowadays food packaging are mostly made of plastics, natural or synthetic, therefore effect of irradiation on these materials is crucial for packing engineering for food irradiation technology. By selecting the right polymer materials for food packaging it can be ensured that the critical elements of material and product performance are not compromised. When packaging materials are in contact with food at the time of irradiation that regulatory approvals sometimes apply. The review of the R-and-D and technical papers regarding material selection, testing and approval is presented in the report. The most information come from the USA where this subject is well elaborated, the International Atomic Energy Agency (IAEA) reports are reviewed as well. The report can be useful for scientists and food irradiation plants operators. (author)

  1. Measurement of the thermal neutron self shielding coefficient in the Syrian miniature neutron source reactor inner irradiation site using the dy soils

    International Nuclear Information System (INIS)

    Khattab, K.; Khamis, I.

    2007-01-01

    Measurement of the thermal self shielding coefficient ( Gth ) in the Syrian Miniature Neutron Source Reactor (MNSR) inner irradiation site using Dy foils is presented in this paper. The thermal self shielding coefficient is measured as a function of the foil thickness or numbers. The mathematical equation which calculates the average relative radioactivity (Bq/g) versus the foil number is found as well.

  2. Canada helps build food irradiation centre

    International Nuclear Information System (INIS)

    Thomas, R.

    1990-01-01

    In a project backed by the Canadian International Development Agency, Nordion has built a new food irradiation research and development centre in Thailand, and trained Thai personnel in its operation. Consumer market tests of suitably labelled Thai irradiated foods are planned in Canada, once regulatory approval is obtained. Papayas, mangoes and shrimp are of particular interest

  3. The link between off-site-emergency planning and plant-internal accident management

    Energy Technology Data Exchange (ETDEWEB)

    Braun, H.; Goertz, R.

    1995-02-01

    A variety of accident management measures has been developed and implemented in the German nuclear power plants. They constitute a fourth level of safety in the defence-in-depth concept. The containment venting system is an important example. A functioning link with well defined lines of communication between plant-internal accident management and off-site disaster emergency planning has been established.

  4. Water chemistry of the JMTR IASCC irradiation loop system

    International Nuclear Information System (INIS)

    Hanawa, Satoshi; Oogiyanagi, Jin; Mori, Yuichiro; Saito, Junichi; Tsukada, Takashi

    2006-01-01

    Irradiation assisted stress corrosion cracking (IASCC) is recognized as an important degradation issue of the core-internal material for aged Boiling Water Reactors (BWRs). Therefore, irradiation loop system has been developed and installed in the Japan Materials Testing Reactor to perform the IASCC irradiation test. In the IASCC irradiation test, water chemistry of irradiation field is one of the most important key parameters because it affects initiation and propagation of cracks. This paper summarizes the measurement and evaluation method of water chemistry of IASCC irradiation loop system. (author)

  5. Experience of European irradiated fuel transport - the first four hundred tonnes

    International Nuclear Information System (INIS)

    Curtis, H.W.

    1977-01-01

    The paper describes the successful integration of the experience of its three shareholders into an international company providing an irradiated fuel transport service throughout Europe. The experience of transporting more than 400 tonnes of irradiated uranium from fifteen power reactors is used to illustrate the flexibility which the transport organisation requires when the access and handling facilities are different at almost every reactor. Variations in fuel cross sections and lengths of fuel elements used in first generation reactors created the need for first generation flasks with sufficient variants to accommodate all reactor fuels but the trend now is towards standardisation of flasks to perhaps two basic types. Increases in fuel rating have raised the flask shielding and heat dissipation requirements and have influenced the design of later flasks. More stringent criticality acceptance criteria have tended to reduce the flask capacity below the maximum number of elements which could physically be contained. Reprocessing plant acceptance criteria initiated because of the presence of substantial quantities of loose crud released in the flask and the need to transport substantial numbers of failed elements have also reduced the flask capacity. Different modes of transport have been developed to cater for the various limitations on access to reactor sites arising from geographical and routing considerations. The safety record of irradiated fuel transport is examined with explanation of the means whereby this has been achieved. The problems of programming the movement of a pool of flasks for fifteen reactors in eight countries are discussed together with the steps taken to ensure that the service operates fairly to give priority to those reactors with the greatest problems. The transport of European irradiated fuel can be presented as an example of international collaboration which works

  6. Internal structure transition of spin-on glass by electron beam irradiation

    International Nuclear Information System (INIS)

    Araki, Makoto; Taniguchi, Jun; Sawada, Nobuo; Utsumi, Takayuki; Miyamoto, Iwao

    2007-01-01

    The effects of electron beam (EB) irradiation on spin-on glass (SOG) were investigated using thermal desorption spectroscopy. We were able to employ heat treatment as a 'development process', since we discovered that heat treatment breaks different bonds in SOG depending on whether it is applied before or after EB irradiation of SOG. In the case, when heat treatment was applied before EB irradiation of SOG, it was possible to break the Si-C bond at about 500 deg. C. In the case, when heat treatment was applied after EB irradiation of SOG, on the other hand, the -SiC bond could be broken at a lower temperature of about 400 deg. C. Using this difference between the two bond-breaking temperatures, it was possible to develop SOG using thermal desorption development (TDD). Moreover, the bond-breaking mechanisms revealed that the organic components in SOG play an important role in TDD. Hence, in order to determine the influence of organic components on TDD, the development characteristics of SOG samples with 10% and 15% organic contents were investigated

  7. Quality control in the commerce of irradiated foods

    International Nuclear Information System (INIS)

    Bustos R, M.E.

    2000-01-01

    In spite of an irradiated food is innocuous for health and that the irradiation process offers great advantages as conservation and hygiene method and it has been recognised by the Agriculture and Health International organizations and although the adequate equipment exists to make this treatment in the majority of countries, an international trade of irradiated foods has not been established and it is that it has to be required that the quality control of the treatment should be regulated by the corresponding authorities and it also should be harmonized with other countries for the commercial interchange. Owing to up to present an identification method of irradiated foods which is validated, the unique quality control for irradiated foods is realized in the irradiation plant, measuring the absorbed dose in products, using dosimetric systems justly calibrated and standardized to be used the adequate for the type of product and dose level which is wanted to be measured for foods mainly for quarantine treatment which is very important to determine that any part of the irradiation system has reached the minimum dose to obtain the technical effect which is desired and that it does not exceed the maximum dose for that the product quality not to be altered. (Author)

  8. Piling up technology of goods irradiated by single plate source

    International Nuclear Information System (INIS)

    Xia Hezhou; Chen Yuxia; Cao Hongyun; Lin Yong; Zhou guoquan

    1999-01-01

    In the irradiation process of piling up goods in static state, four irradiation working sites and single plate source was adopted. The results showed that piling up in this way remarkably raised the irradiation quality of goods. The utilization rate of radioactive ray reached 22.27%

  9. Allograft tolerance in pigs after fractionated lymphoid irradiation. I. Skin grafts after partial lateral irradiation and bone marrow cell grafting

    International Nuclear Information System (INIS)

    Vaiman, M.; Daburon, F.; Remy, J.; Villiers, P.A.; de Riberolles, C.; Lecompte, Y.; Mahouy, G.; Fradelizi, D.

    1981-01-01

    Experiments with pigs have been performed to establish bone marrow chimerism and skin graft tolerance between SLA genotyped animals. Recipients were conditioned by means of fractionated partial irradiation from lateral cobalt sources (partial lateral irradiation (PLI)). The head, neck, and lungs were protected with lead, the rest of the body being irradiated including the thymus, the majority of lymphoid organs with spleen, and most of the bone marrow sites

  10. Codex general standard for irradiated foods and recommended international code of practice for the operation of radiation facilities used for the treatment of foods

    International Nuclear Information System (INIS)

    1990-06-01

    The FAO/WHO Codex Alimentarius Commission was established to implement the Joint FAO/WHO Food Standards Programme. The purpose of this programme is to protect the health of consumers and to ensure fair practices in the food trade. At its 15th session, held in July 1983, the Commission adopted a Codex General Standard for Irradiated Foods and a Recommended International Code of Practice for the Operation of Radiation Facilities used for the Treatment of Foods. This Standard takes into account the recommendations and conclusions of the Joint FAO/IAEA/WHO Expert Committees convened to evaluate all available data concerning the various aspects of food irradiation. This Standard refers only to those aspects which relate to the processing of foods by ionising energy. The Standard recognizes that the process of food irradiation has been established as safe for general application to an overall average level of absorbed dose of 10 KGy. The latter value shold not be regarded as a toxicological upper limit above which irradiated foods become unsafe; it is simply the level at or below which safety has been established. The Standard provides certain mandatory provisions concerning the facilities used and for the control of the process in the irradiation plants. The present Standard requires that shipping documents accompanying irradiated foods moving in trade should indicate the fact of irradiation. The labelling of prepackaged irradiated foods intended for direct sale to the consumer is not covered in this Standard

  11. Codex general standard for irradiated foods and recommended international code of practice for the operation of radiation facilities used for the treatment of foods

    International Nuclear Information System (INIS)

    1984-01-01

    The FAO/WHO Codex Alimentarius Commission was established to implement the Joint FAO/WHO Food Standards Programme. The purpose of this programme is to protect the health of consumers and to ensure fair practices in the food trade. At its 15th session, held in July 1983, the Commission adopted a Codex General Standard for Irradiated Foods and a Recommended International Code of Practice for the Operation of Radiation Facilities used for the Treatment of Foods. This Standard takes into account the recommendations and conclusions of the Joint FAO/IAEA/WHO Expert Committees convened to evaluate all available data concerning the various aspects of food irradiation. This Standard refers only to those aspects which relate to the processing of foods by ionising energy. The Standard recognizes that the process of food irradiation has been established as safe for general application to an overall average level of absorbed dose of 10 kGy. The latter value should not be regarded as a toxicological upper limit above which irradiated foods become unsafe; it is simply the level at or below which safety has been established. The Standard provides certain mandatory provisions concerning the facilities used and for the control of the process in the irradiation plants. The present Standard requires that shipping documents accompanying irradiated foods moving in trade should indicate the fact of irradiation. The labelling of prepackaged irradiated foods intended for direct sale to the consumer is not covered in this Standard

  12. Current status of food irradiation in the world. Trend in Asia

    International Nuclear Information System (INIS)

    Kume, Tamikazu

    2002-01-01

    This review describes the current status of food irradiation in the world and particularly, its trends in Asia, based on the report of the economic scale investigation on the irradiation in United States and Japan (2001) and on the information of 12th International Meeting on Radiation Processing in France in 2001 and on personal communications. International Consultative Group on Food Irradiation promotes its activities of irradiation globally and 46 countries are affiliated. Food irradiation is allowed in 52 countries. In 1999, 257,000 t of food is irradiated in the world, of which 1/3 is due to spice. The facilities for the irradiation have such sources as 60 Co and 137 Cs γ-rays, electron beam of <10 MeV and X-ray with <5 MeV. Detection methods of irradiated foods are summarized by the project of Analytical Detection Methods for Irradiation Treatment of Foods. The US is the most advanced country in the irradiation and, in Japan, only irradiation of potato is permitted. The detailed present status is also described of Bangladesh, China (the irradiation is most widely conducted in the world), India, Indonesia, Korea, Malaysia, Thailand and Vietnam. Recently Australia and New Zealand have started the irradiation. (K.H.)

  13. 75 FR 77664 - Honeywell International, Inc., Automation and Control Solutions Division, Including On-Site...

    Science.gov (United States)

    2010-12-13

    ..., Inc., Automation and Control Solutions Division, Including On-Site Leased Workers From Manpower... Solutions Division. The Department has determined that these workers were sufficiently under the control of Honeywell International, Inc., Automation and Control Solutions Division to be considered leased workers...

  14. Right Site, Wrong Route - Cannulating the Left Internal Jugular Vein.

    Science.gov (United States)

    Paik, Peter; Arukala, Sanjay K; Sule, Anupam A

    2018-01-09

    Central venous catheters are placed in approximately five million patients annually in the US. The preferred site of insertion is one with fewer risks and easier access. Although the right internal jugular vein is preferred, on occasion, the left internal jugular may have to be accessed. A patient was admitted for septic shock, cerebrovascular accident, and non-ST-segment elevation myocardial infarction. A central venous line was needed for antibiotic and vasopressor administration. Due to trauma from a fall to the right side and previously failed catheterization attempts at the left subclavian and femoral veins, the left internal jugular vein was accessed. On chest radiography for confirmation, the left internal jugular central venous catheter was seen projecting down the left paraspinal region. It did not take the expected course across the midline toward the right and into the superior vena cava (SVC). A review of a computed tomography (CT) scan of the chest with contrast done on a prior admission revealed a duplicated SVC on the left side that had not been reported in the original CT scan interpretation. A left-sided SVC is present in approximately 0.3% to 0.5% of the population, with 90% of these draining into the coronary sinus. During placements of central venous lines and pacemakers, irritation of the coronary sinus may result in hypotension, arrhythmia, myocardial ischemia, or cardiac arrest. A widened mediastinum can be an indication of a duplicated SVC. When attempting a left internal jugular vein central venous catheter placement, it is important to be aware of venous anomalies in order to prevent complications.

  15. An international peer review of the biosphere modelling programme of the US Department of Energy's Yucca mountain site characterization project. Report of the IAEA International Review Team

    International Nuclear Information System (INIS)

    2001-04-01

    The United States Department of Energy (DOE) has a project for characterizing the site of a facility for disposing of radioactive waste located at Yucca Mountain Nevada, USA (the Yucca Mountain Site Characterization Project). This Project has developed an approach for assessing the future potential impact of any releases of radionuclides to the biosphere from a potential disposal facility sited at Yucca Mountain The DOE requested the International Atomic Energy Agency (IAEA) to organize an independent international expert review of the assessment methodology being used in its biosphere modelling programme. The IAEA accepted the request in the context of its statutory obligation to provide for the application of its established international standards of safety for the protection of health, at the request of a State, to any of that State's activities in the field of atomic energy. The terms of reference of the peer review were to review the biosphere assessment methodology being used for the total system performance assessment of the potential disposal facility. The main purpose was to analyze critically the proposed rationale and methodology and to identify consistencies and inconsistencies between methods being used in the frame of the Project and those established in international standards or in international programmes such as the IAEA's Biosphere Modelling and Assessment Programme (BIOMASS). This report presents the consensus view of the international experts convened by the IAEA for carrying out the review

  16. The SKI SITE-94 Project: An International Peer Review Carried out by an OECD/NEA Team of Experts

    International Nuclear Information System (INIS)

    Sagar, Budhi; Devillers, C.; Smith, Paul; Laliuex, P.; Pescatore, C.

    1997-10-01

    The recently completed SITE-94 project is an SKI effort directed at building competence and capacity in the assessment of safety of a spent-fuel geologic repository. Emphasis is given to the assimilation of site-specific data, with its associated uncertainties, into the performance assessment. Specific attention is also given to improving the understanding of mechanisms that might compromise canister integrity. This report represents the common views of an International Review Team (IRT) established by the NEA Secretariat, at the request of SKI, to perform a peer review of SITE-94. The basis for the report is the understanding of SITE-94 and its background obtained by IRT in the course of several months of study of SITE-94 documentation, internal discussions and a meeting with SKI in Stockholm. The report is limited to the main findings of IRT. The intended audience of the report is the staff of SKI and, accordingly, the style of the report is suited to a technical audience familiar with the contents of the SITE-94 project

  17. Some legal considerations in the adoption and application of food irradiation technology

    Energy Technology Data Exchange (ETDEWEB)

    Reyes, L S

    1986-12-31

    This paper will explore the legislative and administrative measures that a developing country, like the Philippines and other country members of ASEAN, may consider and adopt to safeguard the health and safety of their citizens before allowing the use of food irradiation technology as a means of preserving a variety of foods. Some developed countries are now utilizing radiation in the preservation of some foods for commercial purposes. Also, not all countries importing or exporting irradiated foods are technically capable of determining for themselves whether or not these foods are safe for human consumption. Moreover, irradiated foods may be exported/imported without the authorities knowing it for lack of appropriate labelling or information. In this light, it becomes imperative that consumers be given the assurance that foods preserved through the irradiation process are wholesome and safe. This can only be effectively carried out by governments through the adoption of legislative and administrative measures to ensure the safe utilization of the irradiation process and strict adherence by manufacturers, distributors and sellers of irradiated food to the internationally accepted FAO and WHO standards of irradiated foods and recommended international Code of Practice for operation of radiation facilities for treatment of foods. Some provisions that should be seriously considered in the enactment of legislation include: regulating the utilization of the irradiation process through licensing, i.e. no food item may be irradiated without first securing a license from the appropriate government agency and no irradiated food may be sold or distributed without first securing a similar prior permit/license; providing the specific allowable dose to be utilized in the radiation process beyond which the process will be considered illegal; giving the government the authority to regularly monitor the irradiation facilities to ensure that it is sanitary and technically safe not

  18. Some legal considerations in the adoption and application of food irradiation technology

    International Nuclear Information System (INIS)

    Reyes, L. S.

    1985-01-01

    This paper will explore the legislative and administrative measures that a developing country, like the Philippines and other country members of ASEAN, may consider and adopt to safeguard the health and safety of their citizens before allowing the use of food irradiation technology as a means of preserving a variety of foods. Some developed countries are now utilizing radiation in the preservation of some foods for commercial purposes. Also, not all countries importing or exporting irradiated foods are technically capable of determining for themselves whether or not these foods are safe for human consumption. Moreover, irradiated foods may be exported/imported without the authorities knowing it for lack of appropriate labelling or information. In this light, it becomes imperative that consumers be given the assurance that foods preserved through the irradiation process are wholesome and safe. This can only be effectively carried out by governments through the adoption of legislative and administrative measures to ensure the safe utilization of the irradiation process and strict adherence by manufacturers, distributors and sellers of irradiated food to the internationally accepted FAO and WHO standards of irradiated foods and recommended international Code of Practice for operation of radiation facilities for treatment of foods. Some provisions that should be seriously considered in the enactment of legislation include: regulating the utilization of the irradiation process through licensing, i.e. no food item may be irradiated without first securing a license from the appropriate government agency and no irradiated food may be sold or distributed without first securing a similar prior permit/license; providing the specific allowable dose to be utilized in the radiation process beyond which the process will be considered illegal; giving the government the authority to regularly monitor the irradiation facilities to ensure that it is sanitary and technically safe not

  19. Noninvasive photoacoustic measurement of absorption coefficient using internal light irradiation of cylindrical diffusing fiber

    Science.gov (United States)

    Peng, Dong-qing; Zhu, Li-li; Li, Zhi-fang; Li, Hui

    2017-09-01

    Absorption coefficient of biological tissue is an important parameter in biomedicine, but its determination remains a challenge. In this paper, we propose a method using focusing photoacoustic imaging technique and internal light irradiation of cylindrical diffusing fiber (CDF) to quantify the target optical absorption coefficient. Absorption coefficients for ink absorbers are firstly determined through photoacoustic and spectrophotometric measurements at the same excitation, which demonstrates the feasibility of this method. Also, the optical absorption coefficients of ink absorbers with several concentrations are measured. Finally, the two-dimensional scanning photoacoustic image is obtained. Optical absorption coefficient measurement and simultaneous photoacoustic imaging of absorber non-invasively are the typical characteristics of the method. This method can play a significant role for non-invasive determination of blood oxygen saturation, the absorption-based imaging and therapy.

  20. IAEA International Database on Irradiated Nuclear Graphite Properties. 7th meeting of the Technical Steering Committee

    International Nuclear Information System (INIS)

    Humbert, D.; Wickham, A.J.

    2005-06-01

    This report summarizes the Consultant Meeting '7th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties' held on 16-17 March 2005 at the IAEA Headquarters, Vienna, Austria. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database and to make recommendations for actions for the next year. The purposes of the meeting were fully met. This report contains the current status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  1. IAEA International Database on Irradiated Nuclear Graphite Properties. 6th meeting of the Technical Steering Committee

    International Nuclear Information System (INIS)

    Humbert, D.; Wickham, A.J.

    2004-12-01

    This report summarizes the Consultant Meeting 6th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties' held on 16-17 September 2004 at Plas Tan-Y-Bwlch, Maentwrog, Gwynedd, UK. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database and to make recommendations for actions for the next year. The purposes of the meeting were fully met. This report contains the current status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  2. Application of irradiated wire

    International Nuclear Information System (INIS)

    Uda, I.; Kozima, K.; Suzuki, S.; Tada, S.; Torisu, S.; Veno, K.

    1984-01-01

    Rubber insulated wires are still useful for internal wiring in motor vehicles and electrical equipment because of flexibility and toughness. Irradiated cross-linked rubber materials have been successfully introduced for use with fusible link wire and helically coiled cord

  3. Lattice damage caused by the irradiation of diamond

    CERN Document Server

    Campbell, B; Mainwood, A; Newton, M; Davies, G

    2002-01-01

    Diamond is perceived to be radiation-hard, but the damage caused to the diamond is not well understood. The intrinsic defects (vacancies and interstitials) which are created by radiation damage are immobile at room temperature in diamond, unlike in silicon. Therefore, once the mechanisms of damage are understood for one type and energy of the particle, the dose and energy dependence of irradiation by other particles at a range of energies can be extrapolated. When a crystal is irradiated, the generation rates of vacancies and self-interstitials are generally determined by optical or electron paramagnetic resonance (EPR) spectroscopy experiments carried out after the irradiation has stopped. However, as the irradiation proceeds some of the carbon atoms displaced from their lattice sites may relax back into the vacant site, and the damage event will not be observed in the later measurement. In this paper, the mechanisms for radiation damage by charged particles in particular electrons and photons are investigat...

  4. Design, Fabrication, and Initial Operation of a Reusable Irradiation Facility

    International Nuclear Information System (INIS)

    Heatherly, D.W.; Thoms, K.R.; Siman-Tov, I.I.; Hurst, M.T.

    1999-01-01

    A Heavy-Section Steel Irradiation (HSSI) Program project, funded by the US Nuclear Regulatory Commission, was initiated at Oak Ridge National Laboratory to develop reusable materials irradiation facilities in which metallurgical specimens of reactor pressure vessel steels could be irradiated. As a consequence, two new, identical, reusable materials irradiation facilities have been designed, fabricated, installed, and are now operating at the Ford Nuclear Reactor at the University of Michigan. The facilities are referred to as the HSSI-IAR facilities with the individual facilities being designated as IAR-1 and IAR-2. This new and unique facility design requires no cutting or grinding operations to retrieve irradiated specimens, all capsule hardware is totally reusable, and materials transported from site to site are limited to specimens only. At the time of this letter report, the facilities have operated successfully for approximately 2500 effective full-power hours

  5. China's move to food irradiation

    International Nuclear Information System (INIS)

    Wedekind, L.H.

    1986-01-01

    The Chinese officials outlined China's past and future directions at a recent international food irradiation seminar in Shanghai sponsored by the FAO and IAEA. The meeting was attended by about 170 participants from China and 22 other countries, primarily from the Asian and Pacific region. Three food irradiation plants currently are operating in the region and 14 more are planned over the next 5 years. It was reported that China continues to suffer high food losses, up to 30% for some commodities, primarily due to preservation and storage problems. In January 1986, the first of five regional irradiation facilities planned in China officially opened in Shanghai. The Shanghai irradiation centre plans to process up to 35,000 tons of vegetables a year, as well as some spices, fruits, and non-food products. The Ministry of Public Health has approved seven irradiated foods as safe human diets: rice, potatoes, onions, garlic, peanuts, mushrooms and pork sausages; approval for apples is expected shortly. The Chinese officials at the Shanghai meeting stressed their openness to foreign participation and cooperation in food irradiation's development

  6. High-dose irradiation: Wholesomeness of food irradiated with doses above 10 kGy. Report of a joint FAO/IAEA/WHO study group

    International Nuclear Information System (INIS)

    1999-01-01

    This report presents the recommendations of an international group of experts convened by the World Health Organization, in association with the Food and Agriculture Organization of the United Nations and the International Atomic Energy Agency, to consider the implications of food irradiated to doses higher than those recommended in 1980 by the Joint Expert Committee on the Wholesomeness of Irradiated Food. Irradiation ensures the hygienic quality of food and extends shelf-life. The public perception of the safety of food irradiation has generally precluded its widespread use. However, current applications of food irradiation to doses over 10 kGy have been in the development of high-quality shelf-stable convenience foods for specific target groups such as immunosuppressed individuals and those under medical care, astronauts and outdoor enthusiasts. The Study Group reviewed data relating to the toxicological, nutritional, radiation chemical and physical aspects of food irradiated to doses above 10kGy from a wide range and number of studies carried out over the last forty years. This report presents a comprehensive summary, along with references, of the effectiveness and safety of the irradiation process. It concludes that foods treated with doses greater than 10kGy can be considered safe and nutritionally adequate when produced under established Good Manufacturing Practice

  7. Selection and Studies of a site for a contract food irradiator

    International Nuclear Information System (INIS)

    Henon, Y.

    1986-09-01

    The success of a contract irradiation business greatly depends on the choice of the plant location. The decision should be primarily based on the market studies indicating the location of the main customers. However sufficient infrastructure should be available and places like harbors generally appear as highly favourable. While the establishment of an electron beam accelerator requires few particular studies, some technical points must be checked before considering the construction of a gamma irradiator. Preliminary technical studies may be needed regarding aspects such as quake hazards and hydreological profile. However, in very rare occurrences only should the data make another choice necessary

  8. Detection of hydrocarbons in irradiated foods

    International Nuclear Information System (INIS)

    Miyahara, Makoto; Maitani, Tamio; Saito, Akiko; Kamimura, Tomomi; Nagasawa, Taeko; Kobayashi, Yasuo; Ito, Hitoshi

    2003-01-01

    The hydrocarbon method for the detection of irradiated foods is now recognized as the international technique. This method is based on radiolysis of fatty acids in food to give hydrocarbons. In order to expand this technique's application, ten foods (butter, cheese, chicken, pork, beef, tuna, dry shrimp, avocado, papaya, and mango) were irradiated in the range from 0.5 to 10 kGy and the hydrocarbons in them were detected. Recoveries of the hydrocarbons from most foods were acceptable (38-128%). Some hydrocarbons were found in non-irradiated foods, particularly, in butter, cheese, tuna, and shrimp. Seven irradiated foods, butter, cheese, chicken, beef, pork, tuna, dry shrimp, and avocado were detectable at their practical doses by measuring the appropriate marker hydrocarbons. In most case, marker hydrocarbon will be 1,7-hexadecadiene. However, the marker hydrocarbons produced only in irradiated foods varied from food to food; therefore, it is necessary to check a specific irradiated food for marker hydrocarbons. On the other hand, two irradiated foods (papaya and mango which were irradiated at their practical doses) were difficult to distinguish from non-irradiated foods using this method. (author)

  9. Detection of hydrocarbons in irradiated foods

    Energy Technology Data Exchange (ETDEWEB)

    Miyahara, Makoto; Maitani, Tamio [National Inst. of Health Sciences, Tokyo (Japan); Saito, Akiko; Kamimura, Tomomi; Nagasawa, Taeko [Kitasato Univ., Sagamihara, Kanagawa (Japan). School of Allied Health Sciences; Kobayashi, Yasuo; Ito, Hitoshi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Establishment

    2003-06-01

    The hydrocarbon method for the detection of irradiated foods is now recognized as the international technique. This method is based on radiolysis of fatty acids in food to give hydrocarbons. In order to expand this technique's application, ten foods (butter, cheese, chicken, pork, beef, tuna, dry shrimp, avocado, papaya, and mango) were irradiated in the range from 0.5 to 10 kGy and the hydrocarbons in them were detected. Recoveries of the hydrocarbons from most foods were acceptable (38-128%). Some hydrocarbons were found in non-irradiated foods, particularly, in butter, cheese, tuna, and shrimp. Seven irradiated foods, butter, cheese, chicken, beef, pork, tuna, dry shrimp, and avocado were detectable at their practical doses by measuring the appropriate marker hydrocarbons. In most case, marker hydrocarbon will be 1,7-hexadecadiene. However, the marker hydrocarbons produced only in irradiated foods varied from food to food; therefore, it is necessary to check a specific irradiated food for marker hydrocarbons. On the other hand, two irradiated foods (papaya and mango which were irradiated at their practical doses) were difficult to distinguish from non-irradiated foods using this method. (author)

  10. Long term developments in irradiated natural uranium processing costs. Optimal size and siting of plants; Perspectives a long terme des couts de traitement de l'uranium naturel irradie. Tailles et localisations optimales des usines

    Energy Technology Data Exchange (ETDEWEB)

    Thiriet, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Oger, C; Vaumas, P de [Saint-Gobain Nucleaire, 92 - Courbevoie (France)

    1964-07-01

    The aim of this paper is to help solve the problem of the selection of optimal sizes and sites for spent nuclear fuel processing plants associated with power capacity programmes already installed. Firstly, the structure of capital and running costs of irradiated natural uranium processing plants is studied, as well as the influence of plant sizes on these costs and structures. Shipping costs from the production site to the plant must also be added to processing costs. An attempt to reach a minimum cost for the production of a country or a group of countries must therefore take into account both the size and the location of the plants. The foreseeable shipping costs and their structure (freight, insurance, container cost and depreciation), for spent natural uranium are indicated. Secondly, for various annual spent fuel reprocessing programmes, the optimal sizes and locations of the plants are determined. The sensitivity of the results to the basic assumptions relative to processing costs, shipping costs, the starting up year of the plant programme and the length of period considered, is also tested. - this rather complex problem, of a combinative nature, is solved through dynamic programming methods. - It is shown that these methods can also be applied to the problem of selecting the optimal sizes and locations of processing plants for MTR type fuel elements, related to research reactor programmes, as well as to future plutonium element processing plants related to breeder reactors. Thirdly, the case where yearly extraction of the plutonium contained in the irradiated natural uranium is not compulsory is examined; some stockpiling of the fuel is then allowed some years, entailing delayed processing. The load factor of such plants is thus greatly improved with respect to that of plants where the annual plutonium demand is strictly satisfied. By including spent natural uranium stockpiling costs an optimal rhythm of introduction and optimal sizes for spent fuel

  11. Food Irradiation Newsletter. V. 14, no. 2

    International Nuclear Information System (INIS)

    1990-12-01

    This issue reports specific training activities on Food Irradiation Process Control School, both for technical supervisors of irradiation facilities and food control officials/inspectors, and summary reports of Workshops on dosimetry techniques for food irradiation and on techno-economic feasibility of food irradiation for Latin American countries are included. After 12 years of operation, the International Facility for Food Irradiation Technology (IFFIT) will cease to function after 31 December 1990. This issue reports the last inter-regional training course organized by IFFIT, and also features reports on food irradiation in Asia. Active developments in the field in several Asian countries may be found in the reports of the Workshop on the Commercialization of Food Irradiation, Shanghai, and the Research Co-ordination Meeting on the Asian Regional Co-operative Project on Food Irradiation (with emphasis on acceptance and process control), Bombay. Status reports of programmes in these countries are also included. Refs and tabs

  12. Mechanical properties of irradiated beryllium

    International Nuclear Information System (INIS)

    Beeston, J.M.; Longhurst, G.R.; Wallace, R.S.

    1992-01-01

    Beryllium is planned for use as a neutron multiplier in the tritium breeding blanket of the International Thermonuclear Experimental Reactor (ITER). After fabricating samples of beryllium at densities varying from 80 to 100% of the theoretical density, we conducted a series of experiments to measure the effect of neutron irradiation on mechanical properties, especially strength and ductility. Samples were irradiated in the Advanced Test Reactor (ATR) to a neutron fluence of 2.6 x 10 25 n/m 2 (E > MeV) at an irradiation temperature of 75deg C. These samples were subsequently compression-tested at room temperature, and the results were compared with similar tests on unirradiated specimens. We found that the irradiation increased the strength by approximately four times and reduced the ductility to approximately one fourth. Failure was generally ductile, but the 80% dense irradiated samples failed in brittle fracture with significant generation of fine particles and release of small quantities of tritium. (orig.)

  13. Mechanical properties of irradiated beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Beeston, J.M.; Longhurst, G.R.; Wallace, R.S. (EG and G Idaho, Inc., Idaho Falls, ID (United States). Idaho National Engineering Lab.); Abeln, S.P. (EG and G Rocky Flats, Inc., Golden, CO (United States))

    1992-10-01

    Beryllium is planned for use as a neutron multiplier in the tritium breeding blanket of the International Thermonuclear Experimental Reactor (ITER). After fabricating samples of beryllium at densities varying from 80 to 100% of the theoretical density, we conducted a series of experiments to measure the effect of neutron irradiation on mechanical properties, especially strength and ductility. Samples were irradiated in the Advanced Test Reactor (ATR) to a neutron fluence of 2.6 x 10[sup 25] n/m[sup 2] (E > MeV) at an irradiation temperature of 75deg C. These samples were subsequently compression-tested at room temperature, and the results were compared with similar tests on unirradiated specimens. We found that the irradiation increased the strength by approximately four times and reduced the ductility to approximately one fourth. Failure was generally ductile, but the 80% dense irradiated samples failed in brittle fracture with significant generation of fine particles and release of small quantities of tritium. (orig.).

  14. Mechanical properties of irradiated beryllium

    Science.gov (United States)

    Beeston, J. M.; Longhurst, G. R.; Wallace, R. S.; Abeln, S. P.

    1992-10-01

    Beryllium is planned for use as a neutron multiplier in the tritium breeding blanket of the International Thermonuclear Experimental Reactor (ITER). After fabricating samples of beryllium at densities varying from 80 to 100% of the theoretical density, we conducted a series of experiments to measure the effect of neutron irradiation on mechanical properties, especially strength and ductility. Samples were irradiated in the Advanced Test Reactor (ATR) to a neutron fluence of 2.6 × 10 25 n/m 2 ( E > 1 MeV) at an irradiation temperature of 75°C. These samples were subsequently compression-tested at room temperature, and the results were compared with similar tests on unirradiated specimens. We found that the irradiation increased the strength by approximately four times and reduced the ductility to approximately one fourth. Failure was generally ductile, but the 80% dense irradiated samples failed in brittle fracture with significant generation of fine particles and release of small quantities of tritium.

  15. Intracranial meningiomas after high-dose irradiation

    International Nuclear Information System (INIS)

    Soffer, D.; Gomori, J.M.; Siegal, T.; Shalit, M.N.

    1989-01-01

    Three patients who presented with intracranial meningiomas 12, 15, and 20 years, respectively, after therapeutic high-dose irradiation of a primary brain tumor are described. Analysis of these cases and similar documented cases suggests that meningiomas after high-dose irradiation constitute a recognizable entity. Patients with such tumors received radiation therapy at a young age (mean age, 9.4 years). After a latent period of 2 to 47 years (mean, 19.8 years) they developed meningiomas at the site of irradiation, at a much younger age than patients with ''spontaneous'' meningiomas. Similar to the situation with meningiomas after low-dose irradiation, a relatively high proportion of meningiomas induced by high-dose irradiation tend to be malignant and biologically aggressive. A very young age at the time of irradiation seems to predispose to the induction of malignant meningiomas, rather than benign tumors. These unusual features provide indirect evidence that high-dose radiation may play a role in the pathogenesis of meningiomas.41 references

  16. Irradiation of dehydrated vegetables

    International Nuclear Information System (INIS)

    Esterhuyse, A; Esterhuizen, T.

    1985-01-01

    The reason for radurization was to decreased the microbial count of dehydrated vegetables. The average absorbed irradiation dose range between 2kGy and 15kGy. The product catagories include a) Green vegetables b) White vegetables c) Powders of a) and b). The microbiological aspects were: Declining curves for the different products of T.P.C., Coliforms, E. Coli, Stap. areus, Yeast + Mold at different doses. The organoleptical aspects were: change in taste, flavour, texture, colour and moisture. The aim is the marketing of irradiated dehydrated vegetables national and international basis

  17. Irradiated fuel examination using the Cerenkov technique

    International Nuclear Information System (INIS)

    Nicholson, N.; Dowdy, E.J.

    1981-03-01

    A technique for monitoring irradiated nuclear fuel inventories located in water filled storage ponds has been developed and demonstrated. This technique provides sufficient qualitative information to be useful as a confirmatory technique to International Atomic Energy Agency inspectors. Measurements have been made on the Cerenkov glow light intensity from irradiated fuel that show the intensity of this light to be proportional to the cooling time. Fieldable instruments used in several tests confirm that such measurements can be made easily and rapidly, without fuel assembly movement or the introduction of apparatus into the storage ponds. The Cerenkov technique and instrumentation have been shown to be of potential use to operators of reactor spent fuel facilities and away from reactor storage facilities, and to the International Atomic Energy Agency inspectors who provide surveillance of the irradiated fuel stored in these facilities

  18. Recent progress in food preservation by irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Vas, K [Food and Agriculture Organization of the United Nations, Rome (Italy)

    1977-01-01

    The possible use of ionizing radiations in food preservation is discussed. It has been recognized that treatment of foods with ionizing radiations not only serves the purpose of stabilizing them in their original state, but may also enhance the hygienic properties of certain foodstuffs. Several examples conerning improvements in food quality and preservation by irradiation in different countries have been reported. The economic viewpoint and the possibilities for use of irradiated products in international trade are discussed. The development of international cooperation in sharing of research results and information and sharing of costs of wholesomeness testing have been pointed out.

  19. Recent progress in food preservation by irradiation

    International Nuclear Information System (INIS)

    Vas, K.

    1977-01-01

    The possible use of ionizing radiations in food preservation is discussed. It has been recognized that treatment of foods with ionizing radiations not only serves the purpose of stabilizing them in their original state, but may also enhance the hygienic properties of certain foodstuffs. Several examples conerning improvements in food quality and preservation by irradiation in different countries have been reported. The economic viewpoint and the possibilities for use of irradiated products in international trade are discussed. The development of international cooperation in sharing of research results and information and sharing of costs of wholesomeness testing have been pointed out. (G.C.)

  20. Genetic Characterization of a Panel of Diverse HIV-1 Isolates at Seven International Sites.

    Directory of Open Access Journals (Sweden)

    Bhavna Hora

    Full Text Available HIV-1 subtypes and drug resistance are routinely tested by many international surveillance groups. However, results from different sites often vary. A systematic comparison of results from multiple sites is needed to determine whether a standardized protocol is required for consistent and accurate data analysis. A panel of well-characterized HIV-1 isolates (N = 50 from the External Quality Assurance Program Oversight Laboratory (EQAPOL was assembled for evaluation at seven international sites. This virus panel included seven subtypes, six circulating recombinant forms (CRFs, nine unique recombinant forms (URFs and three group O viruses. Seven viruses contained 10 major drug resistance mutations (DRMs. HIV-1 isolates were prepared at a concentration of 107 copies/ml and compiled into blinded panels. Subtypes and DRMs were determined with partial or full pol gene sequences by conventional Sanger sequencing and/or Next Generation Sequencing (NGS. Subtype and DRM results were reported and decoded for comparison with full-length genome sequences generated by EQAPOL. The partial pol gene was amplified by RT-PCR and sequenced for 89.4%-100% of group M viruses at six sites. Subtyping results of majority of the viruses (83%-97.9% were correctly determined for the partial pol sequences. All 10 major DRMs in seven isolates were detected at these six sites. The complete pol gene sequence was also obtained by NGS at one site. However, this method missed six group M viruses and sequences contained host chromosome fragments. Three group O viruses were only characterized with additional group O-specific RT-PCR primers employed by one site. These results indicate that PCR protocols and subtyping tools should be standardized to efficiently amplify diverse viruses and more consistently assign virus genotypes, which is critical for accurate global subtype and drug resistance surveillance. Targeted NGS analysis of partial pol sequences can serve as an alternative

  1. Food irradiation in perspective

    International Nuclear Information System (INIS)

    Henon, Y.M.

    1995-01-01

    Food irradiation already has a long history of hopes and disappointments. Nowhere in the world it plays the role that it should have, including in the much needed prevention of foodborne diseases. Irradiated food sold well wherever consumers were given a chance to buy them. Differences between national regulations do not allow the international trade of irradiated foods. While in many countries food irradiation is still illegal, in most others it is regulated as a food additive and based on the knowledge of the sixties. Until 1980, wholesomeness was the big issue. Then the ''prerequisite'' became detection methods. Large amounts of money have been spent to design and validate tests which, in fact, aim at enforcing unjustified restrictions on the use of the process. In spite of all the difficulties, it is believed that the efforts of various UN organizations and a growing legitimate demand for food safety should in the end lead to recognition and acceptance. (Author)

  2. Food irradiation: its role in food safety

    International Nuclear Information System (INIS)

    Qureshi, R. U.

    1985-01-01

    There are food safety criteria generally defined by international groups and specifically defined by individual countries. Food irradiation will be discussed in the light of food safety regulations. The merits and acceptability of food irradiation in promoting trade within and between countries will also be discussed. The need for public awareness and training of technical personnel will be highlighted

  3. Food irradiation: its role in food safety

    Energy Technology Data Exchange (ETDEWEB)

    Qureshi, R U

    1986-12-31

    There are food safety criteria generally defined by international groups and specifically defined by individual countries. Food irradiation will be discussed in the light of food safety regulations. The merits and acceptability of food irradiation in promoting trade within and between countries will also be discussed. The need for public awareness and training of technical personnel will be highlighted

  4. Irradiation embrittlement of pressure vessel steels

    International Nuclear Information System (INIS)

    Brumovsky, M.; Vacek, M.

    1975-01-01

    A Standard Research Programme on Irradiation Embrittlement of Pressure Vessel Steels was approved by the Coordinating Meeting on the 12th May 1972 at the Working Group on Engineering Aspects of Irradiation Embrittlement of Pressure Vessel Steels. This Working Group was set up by the International Atomic Energy Agency in Vienna. Seven countries with their research institutes agreed on doing irradiation experiments according to the approved programme on steel A533 B from the U.S. HSST Programme. The Czechoslovak contribution covering tensile and impact testing of non-irradiated steel and steel irradiated at 280degC to 1.3 x 10 23 n/m 2 (E above 1 MeV) is presented in this report. As an additional part the same set of experiments was carried out on two additional steels - A 542 and A 543, made in SKODA Works for comparison of their irradiation embrittlement and hardening with A533 B steel. (author)

  5. Irradiated Foods Detection by Thermoluminescence (TL) and DEFT/APC Analysis

    International Nuclear Information System (INIS)

    Choi, I.D.; Kang, E.K.; Yang, J.S.

    2004-01-01

    Irradiated food detection methods such as Thermoluminescence (TL) and Direct Epifluorescent Filter Technique and Aerobic Plate Count (DEFT/APC) methods were evaluated. Fresh green-onion, onion, and ginger were irradiated at 0, 0.3, 0.6, and 0.9 kGy. Difference in log DEFT/APC units between irradiated and un-irradiated samples was less than 2 long units, below the average threshold value (3-4 long units) of international researches

  6. Neoplasms following childhood radium irradiation of the nasopharynx

    International Nuclear Information System (INIS)

    Sandler, D.P.; Comstock, G.W.; Matanoski, G.M.

    1982-01-01

    Eighteen to 35 years after admission to a clinic for the prevention of deafness, no increased overall cancer risk could be detected among 904 persons who had been treated with nasopharyngeal radium irradiation when compared with the risk among 2,021 persons who were either treated surgically or not treated at all, although there were differences at specific sites. An increased risk of developing both benign and malignant head and neck tumors was found among irradiated persons. Whereas no one head and neck site showed a statistically significant excess, a slight excess of brain cancer occurred 15-20 years after radium treatment. No increase in thyroid cancer risk was observed, a result possibly attributable to the low radiation doses to this organ, and the relatively small population irradiated

  7. The wholesomeness of irradiated food

    International Nuclear Information System (INIS)

    Elias, P.S.; Matsuyama, A.

    1978-01-01

    It is apparent that there is a need for protection of the consumer and a need for governmental authorities to insure a safe and wholesome food supply for the population. Based on objective and scientific evidence regarding the safety of food irradiation, national and international health authorities are able to determine whether irradiated food is acceptable for human consumption. Following a thorough review of all available data, the Joint FAO/IAEA/WHO Expert Committee unconditionally approved wheat and ground wheat products and papaya irradiated for disingestation at a maximum dose of 100 krad, potatoes irradiated for sprout control at a maximum dose not exceeding 15 krad, and chicken irradiated at a maximum dose of 700 krad to reduce microbiological spoilage. Lastly, it unconditionally approved strawberries irradiated at a maximum dose of 300 krad to prolong storage. Onions at irradiated for sprout control at a maximum dose of 15 krad were temporarily approved, subject to preparation of further data on multigeneration reproduction studies on rats. Codfish and redfish eviscerated after irradiation at a maximum dose of 220 krad to reduce microbiological spoilage were also approved, based on the results of various studies in progress. Temporary, conditional approval of rice irradiated for insect disinfestation at a maximum dose of 100 krad was based on results of long-term studies on rats and monkies, available in the next review. Due to insufficient data, no decision regarding irradiated mushrooms was made. (Bell, E.)

  8. Saturation behavior of irradiation hardening in F82H irradiated in the HFIR

    Energy Technology Data Exchange (ETDEWEB)

    Hirose, T. [Blanket Engineering Group, Japan Atomic Energy Agency, Naka, Ibaraki (Japan); Shiba, K.; Tanigawa, H.; Ando, M. [Japan Atomic Energy Agency, Tokai-mura, Naga-gun, Ibaraki-ken (Japan); Klueh, R.L. [Oak Ridge National Laboratory, TN (United States); Stoller, R. [ORNL - Oak Ridge National Laboratory, Materials Science and Technology Div., Oak Ridge, AK TN (United States)

    2007-07-01

    Full text of publication follows: Post irradiation tensile tests on reduced activation ferritic/martensitic steel, F82H have been conducted over the past two decades using Japan Materials Testing Reactor (JMTR) of JAEA, and Fast Flux Testing Facility (FFTF) of PNNL and High Flux Isotope Reactor (HFIR) of ORNL, USA, under Japan/US collaboration programs. According to these results, F82H does not demonstrate irradiation hardening above 673 K up to 60 dpa. The current study has been concentrated on hardening behavior at temperature around 573 K. A series of low temperature irradiation experiment has been conducted at the HFIR under the international collaborative research between JAEA/US-DOE. In this collaboration, the irradiation condition is precisely controlled by the well matured capsule designing and instrumentation. This paper summarizes recent results of the irradiation experiments focused on F82H and its modified steels compared with the irradiation properties database on F82H. Post irradiation tensile tests have been conducted on the F82H and its modified steels irradiated at 573 K and the dose level was up to 25 dpa. According to these results, irradiation hardening of F82H is saturated by 9 dpa and the as-irradiated 0.2 % proof stress is less than 1 GPa at ambient temperature. The deterioration of total elongation was also saturated by 9 dpa irradiation. The ductility of some modified steels which showed larger total elongation than that of F82H before irradiation become the same level as that of standard F82H steel after irradiation, even though its magnitude of irradiation hardening is smaller than that of F82H. This suggests that the more ductile steel demonstrates the more ductility loss at this temperature, regardless to the hardening level. The difference in ductility loss behavior between various tensile specimens will be discussed as the ductility could depend on the specimen dimension. (authors)

  9. The C-terminal region of Rad52 is essential for Rad52 nuclear and nucleolar localization, and accumulation at DNA damage sites immediately after irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Koike, Manabu, E-mail: m_koike@nirs.go.jp [DNA Repair Gene Res., National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan); Yutoku, Yasutomo [DNA Repair Gene Res., National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan); Graduate School of Science, Chiba University, Yayoicho, Inage-ku, Chiba 263-8522 (Japan); Koike, Aki [DNA Repair Gene Res., National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan)

    2013-05-31

    Highlights: •Rad52 might play a key role in the repair of DSB immediately after irradiation. •EYFP-Rad52 accumulates rapidly at DSB sites and colocalizes with Ku80. •Accumulation of Rad52 at DSB sites is independent of the core NHEJ factors. •Localization and recruitment of Rad52 to DSB sites are dependent on the Rad52 CTR. •Basic amino acids in Rad52 CTR are highly conserved among vertebrate species. -- Abstract: Rad52 plays essential roles in homologous recombination (HR) and repair of DNA double-strand breaks (DSBs) in Saccharomyces cerevisiae. However, in vertebrates, knockouts of the Rad52 gene show no hypersensitivity to agents that induce DSBs. Rad52 localizes in the nucleus and forms foci at a late stage following irradiation. Ku70 and Ku80, which play an essential role in nonhomologous DNA-end-joining (NHEJ), are essential for the accumulation of other core NHEJ factors, e.g., XRCC4, and a HR-related factor, e.g., BRCA1. Here, we show that the subcellular localization of EYFP-Rad52(1–418) changes dynamically during the cell cycle. In addition, EYFP-Rad52(1–418) accumulates rapidly at microirradiated sites and colocalizes with the DSB sensor protein Ku80. Moreover, the accumulation of EYFP-Rad52(1–418) at DSB sites is independent of the core NHEJ factors, i.e., Ku80 and XRCC4. Furthermore, we observed that EYFP-Rad52(1–418) localizes in nucleoli in CHO-K1 cells and XRCC4-deficient cells, but not in Ku80-deficient cells. We also found that Rad52 nuclear localization, nucleolar localization, and accumulation at DSB sites are dependent on eight amino acids (411–418) at the end of the C-terminal region of Rad52 (Rad52 CTR). Furthermore, basic amino acids on Rad52 CTR are highly conserved among mammalian, avian, and fish homologues, suggesting that Rad52 CTR is important for the regulation and function of Rad52 in vertebrates. These findings also suggest that the mechanism underlying the regulation of subcellular localization of Rad52 is

  10. IFMIF (International Fusion Materials Irradiation Facility) key element technology phase task description

    Energy Technology Data Exchange (ETDEWEB)

    Ida, M.; Nakamura, H.; Sugimoto, M.; Yutani, T.; Takeuchi, H. [eds.] [Japan Atomic Energy Research Inst., Tokai Research Establishment, Fusion Neutron Laboratory, Tokai, Ibaraki (Japan)

    2000-08-01

    In 2000, a 3 year Key Element technology Phase (KEP) of the International Fusion Materials Irradiation Facility (IFMIF) has been initiated to reduce the key technology risk factors needed to achieve continuous wave (CW) beam with the desired current and energy and to reach the corresponding power handling capabilities in the liquid lithium target system. In the KEP, the IFMIF team (EU, Japan, Russian Federation, US) will perform required tasks. The contents of the tasks are described in the task description sheet. As the KEP tasks, the IFMIF team have proposed 27 tasks for Test Facilities, 12 tasks for Target, 26 tasks for Accelerator and 18 tasks for Design Integration. The task description by RF is not yet available. The task items and task descriptions may be added or revised with the progress of KEP activities. These task description sheets have been compiled in this report. After 3 years KEP, the results of the KEP tasks will be reviewed. Following the KEP, 3 years Engineering Validation Phase (EVP) will continue for IFMIF construction. (author)

  11. IFMIF (International Fusion Materials Irradiation Facility) conceptual design activity reduced cost report

    International Nuclear Information System (INIS)

    2000-02-01

    This report describes the results of a preliminary reevaluation of the design and cost of the International Fusion Materials Irradiation Facility (IFMIF) Project in response to the request from the 28th FPCC meeting in January 1999. Two major ideas have been considered: 1) reduction of the total construction cost through elimination of the previously planned facility upgrade and 2) a facility deployment in 3 stages with capabilities for limited experiments in the first stage. As a result, the size and complexity of the facility could be significantly reduced, leading to substantial cost savings. In addition to these two ideas, this study also included a critical review of the original CDA specification with the objective of elimination of nonessential items. For example, the number of lithium targets was reduced from two to one. As a result of these changes in addition to the elimination of the upgrade, the total cost estimate was very substantially reduced from 797.2 MICF to 487.8 MICF, where 1 MICF = 1 Million of the IFMIF Conversion Units (approximately $1M US January, 1996). (author)

  12. Bending of metal-filled carbon nanotube under electron beam irradiation

    Directory of Open Access Journals (Sweden)

    Abha Misra

    2012-03-01

    Full Text Available Electron beam irradiation induced, bending of Iron filled, multiwalled carbon nanotubes is reported. Bending of both the carbon nanotube and the Iron contained within the core was achieved using two approaches with the aid of a high resolution electron microscope (HRTEM. In the first approach, bending of the nanotube structure results in response to the irradiation of a pristine kink defect site, while in the second approach, disordered sites induce bending by focusing the electron beam on the graphite walls. The HRTEM based in situ observations demonstrate the potential for using electron beam irradiation to investigate and manipulate the physical properties of confined nanoscale structures.

  13. Radioresistance of immunized animals in internal irradiation

    International Nuclear Information System (INIS)

    Kal'nitskij, S.A.; Ponomareva, T.V.; Shubik, V.M.

    1981-01-01

    The influence of an immunization with bacterial vaccines and antimeasles-gamma-globulin on the radioresistance of raceless white mice was studied. In the vaccinated animals a higher survival rate and duration of life, a better general condition and a better curve of weight and stronger physical stamina were stated compared to the merely irradiated mice. The higher radioresistance is ascribed to the stimulation of cellular and humoral factors of the unspecific protection against infection, to the repair of the lymphoid tissue of the immunized animals and to the decrease in autosensibilization. (author)

  14. Investigation of the internal electric field distribution under in situ x-ray irradiation and under low temperature conditions by the means of the Pockels effect

    International Nuclear Information System (INIS)

    Prekas, G; Sellin, P J; Veeramani, P; Davies, A W; Lohstroh, A; Oezsan, M E; Veale, M C

    2010-01-01

    The internal electric field distribution in cadmium zinc telluride (CdZnTe) x-ray and γ-ray detectors strongly affects their performance in terms of charge transport and charge collection properties. In CdZnTe detectors the electric field distribution is sensitively dependent on not only the nature of the metal contacts but also on the working conditions of the devices such as the temperature and the rate of external irradiation. Here we present direct measurements of the electric field profiles in CdZnTe detectors obtained using the Pockels electo-optic effect whilst under in situ x-ray irradiation. These data are also compared with alpha particle induced current pulses obtained by the transient current technique, and we discuss the influence of both low temperature and x-ray irradiation on the electric field evolution. Results from these studies reveal strong distortion of the electric field consistent with the build-up of space charge at temperatures below 250 K, even in the absence of external irradiation. Also, in the presence of x-ray irradiation levels a significant distortion in the electric field is observed even at room temperature which matches well the predicted theoretical model.

  15. Industrial irradiation

    International Nuclear Information System (INIS)

    Stirling, Andrew

    1995-01-01

    Production lines for rubber gloves would not appear to have much in common with particle physics laboratories, but they both use accelerators. Electron beam irradiation is often used in industry to improve the quality of manufactured goods or to reduce production cost. Products range from computer disks, shrink packaging, tyres, cables, and plastics to hot water pipes. Some products, such as medical goods, cosmetics and certain foodstuffs, are sterilized in this way. In electron beam irradiation, electrons penetrate materials creating showers of low energy electrons. After many collisions these electrons have the correct energy to create chemically active sites. They may either break molecular bonds or activate a site which promotes a new chemical linkage. This industrial irradiation can be exploited in three ways: breaking down a biological molecule usually renders it useless and kills the organism; breaking an organic molecule can change its toxicity or function; and crosslinking a polymer can strengthen it. In addition to traditional gamma irradiation using isotopes, industrial irradiation uses three accelerator configurations, each type defining an energy range, and consequently the electron penetration depth. For energies up to 750 kV, the accelerator consists of a DC potential applied to a simple wire anode and the electrons extracted through a slot in a coaxially mounted cylindrical cathode. In the 1-5 MeV range, the Cockcroft-Walton or Dynamitron( R ) accelerators are normally used. To achieve the high potentials in these DC accelerators, insulating SF6 gas and large dimension vessels separate the anode and cathode; proprietary techniques distinguish the various commercial models available. Above 5 MeV, the size of DC accelerators render them impractical, and more compact radiofrequency-driven linear accelerators are used. Irradiation electron beams are actually 'sprayed' over the product using a magnetic deflection system. Lower energy beams of

  16. The Next Spaceflight Solar Irradiance Sensor: TSIS

    Science.gov (United States)

    Kopp, Greg; Pilewskie, Peter; Richard, Erik

    2016-05-01

    The Total and Spectral Solar Irradiance Sensor (TSIS) will continue measurements of the solar irradiance with improved accuracies and stabilities over extant spaceflight instruments. The two TSIS solar-observing instruments include the Total Irradiance Monitor (TIM) and the Spectral Irradiance Monitor (SIM) for measuring total- and spectral- solar-irradiance, respectively. The former provides the net energy powering the Earth’s climate system while the latter helps attribute where that energy is absorbed by the Earth’s atmosphere and surface. Both spaceflight instruments are assembled and being prepared for integration on the International Space Station. With operations commencing in late 2017, the TSIS is intended to overlap with NASA’s ongoing SOlar Radiation and Climate Experiment (SORCE) mission, which launched in 2003 and contains the first versions of both the TIM and SIM instruments, as well as with the TSI Calibration Transfer Experiment (TCTE), which began total solar irradiance measurements in 2013. We summarize the TSIS’s instrument improvements and intended solar-irradiance measurements.

  17. Long term developments in irradiated natural uranium processing costs. Optimal size and siting of plants

    International Nuclear Information System (INIS)

    Thiriet, L.

    1964-01-01

    The aim of this paper is to help solve the problem of the selection of optimal sizes and sites for spent nuclear fuel processing plants associated with power capacity programmes already installed. Firstly, the structure of capital and running costs of irradiated natural uranium processing plants is studied, as well as the influence of plant sizes on these costs and structures. Shipping costs from the production site to the plant must also be added to processing costs. An attempt to reach a minimum cost for the production of a country or a group of countries must therefore take into account both the size and the location of the plants. The foreseeable shipping costs and their structure (freight, insurance, container cost and depreciation), for spent natural uranium are indicated. Secondly, for various annual spent fuel reprocessing programmes, the optimal sizes and locations of the plants are determined. The sensitivity of the results to the basic assumptions relative to processing costs, shipping costs, the starting up year of the plant programme and the length of period considered, is also tested. - this rather complex problem, of a combinative nature, is solved through dynamic programming methods. - It is shown that these methods can also be applied to the problem of selecting the optimal sizes and locations of processing plants for MTR type fuel elements, related to research reactor programmes, as well as to future plutonium element processing plants related to breeder reactors. Thirdly, the case where yearly extraction of the plutonium contained in the irradiated natural uranium is not compulsory is examined; some stockpiling of the fuel is then allowed some years, entailing delayed processing. The load factor of such plants is thus greatly improved with respect to that of plants where the annual plutonium demand is strictly satisfied. By including spent natural uranium stockpiling costs an optimal rhythm of introduction and optimal sizes for spent fuel

  18. Proceedings of a seminar on food irradiation

    International Nuclear Information System (INIS)

    1985-07-01

    International interest in the industrial use of ionizing radiation as a means of food preservation has increased rapidly following the favourable outcome of many years of intensive research on the health implications of food irradiation. The introduction in the U.S. and elsewhere of legislation restricting the use of chemical additives to foods for both human and animal consumption has contributed to this development. A high priority must be given to coordinating legislation on food irradiation within the European Community if international trade in irradiated foods is to make progress and food losses by spoilage and by insect infestation are to be minimised. Speakers from the United Kigdom, France and Germany describe the legislative and developmental situation in their respective countries. The implication for the Irish food industry is presented by scientists working on food research and development and regulatory aspects in Ireland are also discussed

  19. Global trends of acceptance and trade in irradiated foods

    Energy Technology Data Exchange (ETDEWEB)

    Matin, M A [Food and Environmental Protection Section, Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, International Atomic Energy Agency, Vienna (Austria)

    2001-05-01

    Issues as relevant to wide scale application of food irradiation are presented in this paper to provide current status of the technology. Global development on key issues such as public acceptance, public health improvement, safety and wholesomeness, regulatory aspects, potential application of the technology to ease quarantine problems in the trade of food and agricultural commodities as a viable alternative to fumigation with methyl bromide have been presented. Irradiation ensures the hygienic quality of food and extends shelf-life. Many international organizations and respected regional/national bodies agree on the merits of the technique and valuable contribution that the process can offer to safeguard the food supply worldwide. Codex General Standard for irradiated food and the associated Code of Practice for operation of the irradiation facilities used for the treatment of foods adopted in 1983 forms the regulatory basis for commercial utilization of the processing technology. More than 40 countries of the world have Standards/Regulations to process one or more food products by the irradiation process. Efforts are underway to harmonise national regulations on food irradiation to remove obstacles for international trade of irradiated products. There is a rapid development on commercial application of food irradiation in the USA and elsewhere in the past few months. There are already several existing commercial irradiators available for treating food in the USA and many more are planned to be built. Such commercial food irradiation facilities are also in different stage of development in Brazil, India, Mexico, Thailand, People's Republic of China, Republic of Korea. Roles of irradiation ensuring food safety, contributing food security and facilitating trade are more and more recognized in developed and developing countries alike. (author)

  20. Global trends of acceptance and trade in irradiated foods

    International Nuclear Information System (INIS)

    Matin, M.A.

    2001-01-01

    Issues as relevant to wide scale application of food irradiation are presented in this paper to provide current status of the technology. Global development on key issues such as public acceptance, public health improvement, safety and wholesomeness, regulatory aspects, potential application of the technology to ease quarantine problems in the trade of food and agricultural commodities as a viable alternative to fumigation with methyl bromide have been presented. Irradiation ensures the hygienic quality of food and extends shelf-life. Many international organizations and respected regional/national bodies agree on the merits of the technique and valuable contribution that the process can offer to safeguard the food supply worldwide. Codex General Standard for irradiated food and the associated Code of Practice for operation of the irradiation facilities used for the treatment of foods adopted in 1983 forms the regulatory basis for commercial utilization of the processing technology. More than 40 countries of the world have Standards/Regulations to process one or more food products by the irradiation process. Efforts are underway to harmonise national regulations on food irradiation to remove obstacles for international trade of irradiated products. There is a rapid development on commercial application of food irradiation in the USA and elsewhere in the past few months. There are already several existing commercial irradiators available for treating food in the USA and many more are planned to be built. Such commercial food irradiation facilities are also in different stage of development in Brazil, India, Mexico, Thailand, People's Republic of China, Republic of Korea. Roles of irradiation ensuring food safety, contributing food security and facilitating trade are more and more recognized in developed and developing countries alike. (author)

  1. Dose Distribution of Gamma Irradiators

    International Nuclear Information System (INIS)

    Park, Seung Woo; Shin, Sang Hun; Son, Ki Hong; Lee, Chang Yeol; Kim, Kum Bae; Jung, Hai Jo; Ji, Young Hoon

    2010-01-01

    Gamma irradiator using Cs-137 have been widely utilized to the irradiation of cell, blood, and animal, and the dose measurement and education. The Gamma cell 3000 Elan (Nordion International, Kanata, Ontario, Canada) irradiator was installed in 2003 with Cs-137 and dose rate of 3.2 Gy/min. And the BioBeam 8000 (Gamma-Service Medical GmbH, Leipzig, Germany) irradiator was installed in 2008 with Cs-137 and dose rate of 3.5 Gy/min. Our purpose was to evaluate the practical dosimetric problems associated with inhomogeneous dose distribution within the irradiated volume in open air state using glass dosimeter and Gafchromic EBT film dosimeter for routine Gamma irradiator dosimetry applications at the KIRAMS and the measurements were compared with each other. In addition, an user guideline for useful utilization of the device based on practical dosimetry will be prepared. The measurement results of uniformity of delivered dose within the device showed variation more than 14% between middle point and the lowest position at central axis. Therefore, to maintain dose variation within 10%, the criteria of useful dose distribution, for research radiation effects, the irradiated specimen located at central axis of the container should be placed within 30 mm from top and bottom surface, respectively. In addition, for measurements using the film, the variations of dose distribution were more then 50% for the case of less than 10 second irradiation, mostly within 20% for the case of more than 20 second irradiation, respectively. Therefore, the irradiation experiments using the BioBeam 8000 irradiator are recommended to be used for specimen required at least more than 20 second irradiation time.

  2. Dose Calculation Evolution for Internal Organ Irradiation in Humans

    International Nuclear Information System (INIS)

    Jimenez V, Reina A.

    2007-01-01

    The International Commission of Radiation Units (ICRU) has established through the years, a discrimination system regarding the security levels on the prescription and administration of doses in radiation treatments (Radiotherapy, Brach therapy, Nuclear Medicine). The first level is concerned with the prescription and posterior assurance of dose administration to a point of interest (POI), commonly located at the geometrical center of the region to be treated. In this, the effects of radiation around that POI, is not a priority. The second level refers to the dose specifications in a particular plane inside the patient, mostly the middle plane of the lesion. The dose is calculated to all the structures in that plane regardless if they are tumor or healthy tissue. In this case, the dose is not represented by a point value, but by level curves called 'isodoses' as in a topographic map, so you can assure the level of doses to this particular plane, but it also leave with no information about how this values go thru adjacent planes. This is why the third level is referred to the volumetrical description of doses so these isodoses construct now a volume (named 'cloud') that give us better assurance about tissue irradiation around the volume of the lesion and its margin (sub clinical spread or microscopic illness). This work shows how this evolution has resulted, not only in healthy tissue protection improvement but in a rise of tumor control, quality of life, better treatment tolerance and minimum permanent secuelae

  3. Status of IAEA international data base on irradiated graphite properties with respect to HTR engineering issues

    International Nuclear Information System (INIS)

    Hacker, P.J.; Haag, G.

    2002-01-01

    The International Database on Irradiated Nuclear Graphite Properties contains data on the physical, chemical, mechanical and other relevant properties of graphites. Its purpose is to provide a platform that makes these properties accessible to approved users in the fields of nuclear power, nuclear safety and other nuclear science and technology applications. The database is constructed using Microsoft Access 97 software and has a controlled distribution by CD ROM to approved users. This paper describes the organisation and management of the database through administrative arrangements approved by the IAEA. It also outlines the operation of the database. The paper concludes with some remarks upon and illustrations of the usefulness of the database for the design and operation of HTR. (authors)

  4. Method of detecting irradiated pepper

    International Nuclear Information System (INIS)

    Doumaru, Takaaki; Furuta, Masakazu; Katayama, Tadashi; Toratani, Hirokazu; Takeda, Atsuhiko

    1989-01-01

    Spices represented by pepper are generally contaminated by microorganisms, and for using them as foodstuffs, some sterilizing treatment is indispensable. However, heating is not suitable to spices, accordingly ethylene oxide gas sterilization has been inevitably carried out, but its carcinogenic property is a problem. Food irradiation is the technology for killing microorganisms and noxious insects which cause the rotting and spoiling of foods and preventing the germination, which is an energy-conserving method without the fear of residual chemicals, therefore, it is most suitable to the sterilization of spices. In the irradiation of lower than 10 kGy, the toxicity test is not required for any food, and the irradiation of spices is permitted in 20 countries. However, in order to establish the international distribution organization for irradiated foods, the PR to consumers and the development of the means of detecting irradiation are the important subjects. The authors used pepper, and examined whether the hydrogen generated by irradiation remains in seeds and it can be detected or not. The experimental method and the results are reported. From the samples without irradiation, hydrogen was scarcely detected. The quantity of hydrogen generated was proportional to dose. The measuring instrument is only a gas chromatograph. (K.I.)

  5. Irradiation-Assisted Stress Corrosion Cracking of Austenitic Stainless Steels in BWR Environments

    International Nuclear Information System (INIS)

    Chen, Y.; Chopra, O. K.; Gruber, Eugene E.; Shack, William J.

    2010-01-01

    The internal components of light water reactors are exposed to high-energy neutron irradiation and high-temperature reactor coolant. The exposure to neutron irradiation increases the susceptibility of austenitic stainless steels (SSs) to stress corrosion cracking (SCC) because of the elevated corrosion potential of the reactor coolant and the introduction of new embrittlement mechanisms through radiation damage. Various nonsensitized SSs and nickel alloys have been found to be prone to intergranular cracking after extended neutron exposure. Such cracks have been seen in a number of internal components in boiling water reactors (BWRs). The elevated susceptibility to SCC in irradiated materials, commonly referred to as irradiation-assisted stress corrosion cracking (IASCC), is a complex phenomenon that involves simultaneous actions of irradiation, stress, and corrosion. In recent years, as nuclear power plants have aged and irradiation dose increased, IASCC has become an increasingly important issue. Post-irradiation crack growth rate and fracture toughness tests have been performed to provide data and technical support for the NRC to address various issues related to aging degradation of reactor-core internal structures and components. This report summarizes the results of the last group of tests on compact tension specimens from the Halden-II irradiation. The IASCC susceptibility of austenitic SSs and heat-affected-zone (HAZ) materials sectioned from submerged arc and shielded metal arc welds was evaluated by conducting crack growth rate and fracture toughness tests in a simulated BWR environment. The fracture and cracking behavior of HAZ materials, thermally sensitized SSs and grain-boundary engineered SSs was investigated at several doses (3 dpa). These latest results were combined with previous results from Halden-I and II irradiations to analyze the effects of neutron dose, water chemistry, alloy compositions, and welding and processing conditions on IASCC. The

  6. Assessment of repair welding technologies of irradiated materials

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-08-15

    Damages of reactor internals of stainless steels caused by SCC and fatigue were identified in aged BWR plants. Repair-welding is one of the practical countermeasure candidates to restore the soundness of components and structures. The project of 'Assessment of Repair welding Technologies of Irradiated Materials' is being carried out to develop the technical guideline regarding the repair-welding of reactor internals. In fiscal 2011, we investigated the weldability of stainless steel 316L irradiated by welding (TIG) tungsten inert gas. Furthermore, the tensile properties and stress corrosion cracking (SCC) susceptibility of the welds were investigated. Cross-sectional observation of heat affected zone (HAZ) of the bead on plate TIG weldments (heat input 4 kJ/cm) of irradiated SUS316L stainless steel containing 0.026 ~ 0.12appm helium showed degradation of grain boundaries due to helium accumulation. Degree of the degradation depended on the amount of helium. No deterioration of grain boundaries was observed by bead on plate welding with one pass one layer when helium content was 0.039appm. The tensile strengths of welds in non-irradiated and irradiated material were similar. However, the elongation of a weldment by irradiated SUS316L containing 0.124appm Helium was lower than non-irradiated. It was estimated to cause the effects of helium bubbles. The SCC susceptibility of the HAZ was no significant difference compared with other locations. (author)

  7. Societal benefits of food irradiation

    International Nuclear Information System (INIS)

    Prakash, Anuradha

    2013-01-01

    Food irradiation has a direct impact on society by reducing the occurrence of food-borne illness, decreasing food spoilage and waste, and facilitating global trade. Food irradiation is approved in 40 countries around the world to decontaminate food of disease and spoilage causing microorganisms, sterilize insect pests, and inhibit sprouting. A recent estimate suggests that 500,000 metric of food is currently irradiated worldwide, primarily to decontaminate spices. Since its first use in the 1960s the use of irradiation for food has grown slowly, but it remains the major technology of choice for certain applications. The largest growth sector in recent years has been phytosanitary irradiation of fruit to disinfest fruit intended for international shipment. For many countries which have established strict quarantine standards, irradiation offers as an effective alternative to chemical fumigants some of which are being phased out due to their effects on the ozone layer. Insects can be sterilized at very low dose levels, thus quality of fruit can be maintained. Irradiation is also highly effective in destroying microbial pathogens such as Salmonella spp., E. coli, and Listeria, hence its application for treatment of spices, herbs, dried vegetables, frozen seafood, poultry, and meat and its contribution to reducing foodborne illnesses. Unfortunately the use of irradiation for improving food safety has been under-exploited. This presentation will provide details on the use, benefits, opportunities, and challenges of food irradiation. (author)

  8. Thermophysical instruments for non-destructive examination of tightness and internal gas pressure or irradiated power reactor fuel rods

    International Nuclear Information System (INIS)

    Pastoushin, V.V.; Novikov, A.Yu.; Bibilashvili, Yu.K.

    1998-01-01

    The developed thermophysical method and technical instruments for non-destructive leak-tightness and gas pressure inspection inside irradiated power reactor fuel rods and FAs under poolside and hot cell conditions are described. The method of gas pressure measuring based on the examination of parameters of thermal convection that aroused in gas volume of rod plenum by special technical instruments. The developed method and technique allows accurate value determination of not only one of the main critical rod parameters, namely total internal gas pressure, that forms rod mean life in the reactor core, but also the partial pressure of every main constituent of gaseous mixture inside irradiated fuel rod, that provides the feasibility of authentic and reliable leak-tightness detection. The described techniques were experimentally checked during the examination of all types power reactor fuel rods existing in Russia (WWER, BN, RBMK) and could form the basis for new technique development for non-destructive examination of PWR (and other) type rods and FAs having gas plenum filled with spring or another elements of design. (author)

  9. Current status of food irradiation in Korea

    International Nuclear Information System (INIS)

    Kwon, Joong-Ho

    2007-01-01

    With respect to the safety of irradiated food, the Korean government has accepted in principle the recommendations of international organization (FAO, WHO, IAEA, CAC, etc) as well as the national-based evaluations. Gamma radiation from Co-60 is now authorized to be used for food irradiation of 26 food items (or classes). Two multipurpose gamma-irradiation facilities (Greenpia Tech. Inc. since 1987; SOYA Co. Ltd. since 2002) are now operating for the treatments of selected food items as well as medical supplies. At present, labeled-irradiated products are not yet being marketed at the consumer level. As an alternative process of chemical fumigants, however, irradiation is being partially utilized for the microbial decontamination and pest control of dried spices, vegetable ingredients, etc. for their use in processed foods as minor ingredients. Commercial applications of food irradiation, though small in number, have been steady ever since. This article introduces the commercial progress in food irradiation technology in Korea in terms of research activities, legislation, commercialization, and the control of irradiated foods. (author)

  10. International scientific communication in the context of social networking sites for scientists

    OpenAIRE

    Stachowiak, Beata

    2016-01-01

    In this paper, the author considers the alterations that occurred in the international scientific communication. It is mainly technological development that exerts the influence over these alterations – particularly the emergence of new media. The major part of this paper is dedicated to the issue of the use of social networking sites in scientific communication. In her considerations, the author refers to the world-wide research pertaining to social media in the meantime demonstrating the at...

  11. Effect of uv irradiation on lambda DNA transcription

    Energy Technology Data Exchange (ETDEWEB)

    Ranade, S S [Cancer Research Inst., Bombay (India)

    1977-05-01

    The effect of uv irradiation of template DNA has been studied in vitro in the E.coli RNA polymerase system with native and uv treated lambda DNA. Lambda DNA was more susceptible to uv than was calf-thymus DNA, yet a residual activity was observed at a uv dose of 0.5 x 10/sup 4/ erg/mm/sup 2/. From the kinetic analysis of the reaction and the incorporation of lambda /sup 32/P-labelled nucleoside triphosphates, it seems reasonable to conclude that uv irradiation probably did not affect the DNA initiation sites, recognizable by RNA polymerase. The transcription products made with uv irradiated lambda DNA were asymmetrical, and hybridized to the right half (R) and the left half (L) of lambda DNA with the ratio of R/L=4/1, and they showed a lower hybridizability than the transcripts with native lambda DNA. The initiation sites recognizable by RNA polymerase seemed to be the same on both native and uv irradiated lambda DNA, though the transcription of uv treated lambda DNA appeared to terminate with rather short RNA chains.

  12. The influence of internal irradiation on the endocrine system and the importance of its functional state for the development of late sequelae

    International Nuclear Information System (INIS)

    Dedov, V.I.; Norets, T.A.

    1981-01-01

    The problem of choosing and proving criteria for the estimation of their biological effect at the level of organism results from the necessity to clarify the danger of incorporation of low doses of radioactive compounds. Therefore the importance of changes in the functional state of the endocrine system for the development of late sequelae following internal irradiation was investigated. Male and female rats were injected once with 1.22x10 4 Bq/g body weight 75 Se-selenomethionine. In the blood plasma the content of thyroxine, corticosterone, testosterone, and estradiol was determined. Moreover, the conditions of adaptation and reparation processes as well as of the reproductive function were checked. A long time afterwards the male rats showed a suppression of the functions of the endocrine system which led to a suppression of the adaptive and repairing processes and of the reproductive function, to a decrease in body weight and dynamic activity. In female animals such phenomena did never occur; that is probably connected to the weakly pronounced changes in the hormonal state. The results allow to propose the hormonal state as a criterion for evaluation of the biological effect of internal irradiation. (author)

  13. Prospects of establishing food irradiation facilities in Kenya

    International Nuclear Information System (INIS)

    Mustapha, A.O.; Patel, J.P.; Rathore, I.V.S.; Hashim, N.O.; Kinyua, A.M.

    2001-01-01

    Full text: A national project of food irradiation in the country is being proposed. At present there are no facilities for food irradiation (and food irradiation research) in Kenya. This report is therefore largely comparative between the traditional and the conventional food preservation methods on the one hand and the irradiation technique on the other. The report is also based on information from other countries where food irradiation is practiced (Kawabata, 1981) or is being also contemplated (Diop et al, 1997), as well as on the relevant report of the International Atomic Energy Agency (IAEA) on this topic (IAEA, 1993). The paper presents the statement of the research problem, i.e., in Kenya large quantities of food and other farm produces go to waste annually as a result of the inadequacies of the preservation techniques currently in use. These (other) preservation techniques, although often less controversial than the irradiation techniques, have also been found to be more expensive to run when compared to irradiation techniques. Such techniques, presently employed in Kenya, include the traditional methods (e.g. sun drying, smoke and fire drying, etc.) and modern techniques such as freezing or refrigeration, lyophilization, etc., as well as application of chemicals like insecticides and fumigants. The latter combines the disadvantages of high costs with environmental pollution and associated health risks. In this preliminary research, aimed at studying the prospects of a national food irradiation project, the following food items that are selected for their importance to the economy of the country, include potatoes, rice, maize, coffee, tea, various fruits, fish and meat. The paper also explores the economic feasibility as well as the human and technological requirements of establishing a commercial food irradiation plant, with aim of assessing the applicability of food irradiation as alternative or a complimentary approach for preservation technique in

  14. Up-to-date status of food irradiation

    Science.gov (United States)

    Ahmed, Mainuddin

    1993-07-01

    The last decade has witnessed significant advancement of the acceptance of food irradiation processing. At present 37 countries have approved one or more food items for human consumption and 25 countries have commercialized this process. More developing countries are showing keen interest to introduce irradiation processing in order to reduce post-harvest food losses, to increase export potentials and to ensure safety of food to their people. Although progress towards acceptance of food irradiation by the industry is slow, actual market trials have shown that once consumers have understood this technology, they are willing to buy irradiated foods. This paper deals with the latest developments in the field of food irradiation with particular reference to legislation, consumer acceptance, commercialization and potential application in developing countries. This paper also deals with the role played by the International Organizations, aimed at facilitating the acceptance of food irradiation.

  15. Results from the CDE phase activity on neutron dosimetry for the international fusion materials irradiation facility test cell

    Energy Technology Data Exchange (ETDEWEB)

    Esposito, B. E-mail: esposito@frascati.enea.it; Bertalot, L.; Maruccia, G.; Petrizzi, L.; Bignan, G.; Blandin, C.; Chauffriat, S.; Lebrun, A.; Recroix, H.; Trapp, J.P.; Kaschuck, Y

    2000-11-01

    The international fusion materials irradiation facility (IFMIF) project deals with the study of an accelerator-based, deuterium-lithium source, producing high energy neutrons at sufficient intensity and irradiation volume to test samples of candidate materials for fusion energy reactors. IFMIF would also provide calibration and validation of data from fission reactor and other accelerator based irradiation tests. This paper describes the activity on neutron/gamma dosimetry (necessary for the characterization of the specimens' irradiation) performed in the frame of the IFMIF conceptual design evaluation (CDE) neutronics tasks. During the previous phase (conceptual design activity (CDA)) the multifoil activation method was proposed for the measurement of the neutron fluence and spectrum and a set of suitable foils was defined. The cross section variances and covariances of this set of foils have now been used for tests on the sensitivity of the IFMIF neutron spectrum determination to cross section uncertainties. The analysis has been carried out using the LSL-M2 code, which optimizes the neutron spectrum by means of a least-squares technique taking into account the variance and covariance files. In the second part of the activity, the possibility of extending to IFMIF the use of existing on-line in-core neutron/gamma monitors (to be located at several positions inside the IFMIF test cell for beam control, safety and diagnostic purposes) has been studied. A feasibility analysis of the modifications required to adapt sub-miniature fission chambers (recently developed by CEA-Cadarache) to the high flux test module of the test cell has been carried out. The verification of this application pertinence and a gross definition of the in-core detector characteristics are described. The option of using self-powered neutron detectors (SPNDs) is also discussed.

  16. Development of data base on food irradiation

    International Nuclear Information System (INIS)

    Ito, Hitoshi; Kume, Tamikazu; Hashimoto, Shoji; Izumi, Fumio.

    1995-12-01

    For the exact understanding on food irradiation in Japan, it is important to provide information of food irradiation to consumers, industries and government offices. However, many of information on food irradiation are only restricted in a few experts or institutes relating to this field. For this reason, data base of food irradiation has been completed together with the systems necessary for input the data using computer. In this data base, about 630 data with full reports were inputted in computer in the field of wholesomeness studies, irradiation effects on food, radiation engineering, detection methods of irradiated food and Q and A of food irradiation for easy understanding. Many of these data are inputted by Japanese language. Some English reports on wholesomeness studies are also included which were mainly obtained from international projects of food irradiation. Many of data on food irradiation are responsible in the fields of food science, dietetics, microbiology, radiation biology, molecular biology, medical science, agricultural science, radiation chemistry, radiation engineering and so on. Data base of food irradiation contains many useful data which can apply to many other fields of radiation processing not only on food irradiation but also on sterilization of medical equipments, upgrading of agricultural wastes and others. (author)

  17. Development of data base on food irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Ito, Hitoshi; Kume, Tamikazu; Hashimoto, Shoji [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; Izumi, Fumio

    1995-12-01

    For the exact understanding on food irradiation in Japan, it is important to provide information of food irradiation to consumers, industries and government offices. However, many of information on food irradiation are only restricted in a few experts or institutes relating to this field. For this reason, data base of food irradiation has been completed together with the systems necessary for input the data using computer. In this data base, about 630 data with full reports were inputted in computer in the field of wholesomeness studies, irradiation effects on food, radiation engineering, detection methods of irradiated food and Q and A of food irradiation for easy understanding. Many of these data are inputted by Japanese language. Some English reports on wholesomeness studies are also included which were mainly obtained from international projects of food irradiation. Many of data on food irradiation are responsible in the fields of food science, dietetics, microbiology, radiation biology, molecular biology, medical science, agricultural science, radiation chemistry, radiation engineering and so on. Data base of food irradiation contains many useful data which can apply to many other fields of radiation processing not only on food irradiation but also on sterilization of medical equipments, upgrading of agricultural wastes and others. (author).

  18. Neutron irradiation of seeds 2

    Energy Technology Data Exchange (ETDEWEB)

    1968-10-01

    The irradiation of seeds with the fast neutron of research reactors has been hampered by difficulties in accurately measuring dose and in obtaining repeatable and comparable results. Co-ordinated research under an international program organized by the FAO and IAEA has already resulted in significant improvements in methods of exposing seeds in research reactors and in obtaining accurate dosimetry. This has been accomplished by the development of a standard reactor facility for the neutron irradiation of seeds and standard methods for determining fast-neutron dose and the biological response after irradiation. In this program various divisions of the IAEA and the Joint FAO/IAEA Division co-operate with a number of research institutes and reactor centres throughout the world. Results of the preliminary experiments were reported in Technical Reports Series No. 76, ''Neutron Irradiation of Seeds''. This volume contains the proceedings of a meeting of co-operators in the FAO/IAEA Neutron Seed Irradiation Program and other active scientists in this field. The meeting was held in Vienna from 11 to 15 December 1967. Refs, figs and tabs.

  19. Neutron irradiation of seeds 2

    International Nuclear Information System (INIS)

    1968-01-01

    The irradiation of seeds with the fast neutron of research reactors has been hampered by difficulties in accurately measuring dose and in obtaining repeatable and comparable results. Co-ordinated research under an international program organized by the FAO and IAEA has already resulted in significant improvements in methods of exposing seeds in research reactors and in obtaining accurate dosimetry. This has been accomplished by the development of a standard reactor facility for the neutron irradiation of seeds and standard methods for determining fast-neutron dose and the biological response after irradiation. In this program various divisions of the IAEA and the Joint FAO/IAEA Division co-operate with a number of research institutes and reactor centres throughout the world. Results of the preliminary experiments were reported in Technical Reports Series No. 76, ''Neutron Irradiation of Seeds''. This volume contains the proceedings of a meeting of co-operators in the FAO/IAEA Neutron Seed Irradiation Program and other active scientists in this field. The meeting was held in Vienna from 11 to 15 December 1967. Refs, figs and tabs

  20. Glycogen metabolism in the liver of Indian desert gerbils (Meriones hurrianae, Jerdon) exposed to internal beta irradiation

    International Nuclear Information System (INIS)

    Gupta, N.K.

    1996-01-01

    Glycogen content and the activities of phosphorylase, glycogen synthetase, phosphohexose isomerase, glucose-6-phosphatase, succinate dehydrogenase, alanine and aspartate aminotransferases have been biochemically determined in the liver of Indian desert gerbils following radiocalcium internal irradiation. Decline in glycogen, phosphohexose isomerase, with a concomitant increase in phosphorylase, succinate dehydrogenase reveals a switch over from glycolytic to oxidative metabolism in liver. Activities of aminotransferases indicate the utilization of transamination products of alanine and aspartate in oxidative pathway during early periods. Transiently increased glucose-6-phosphatase seems to restrict glycogenolytic and glycolytic metabolism and thereby pave way for the acceleration of oxidative metabolism. (author). 52 refs., 2 tabs

  1. Communications strategy for irradiator siting approvals: a Canadian perspective

    International Nuclear Information System (INIS)

    Swinwood, J.F.; Fraser, F.M.

    1995-01-01

    This paper presents a new public attitudes survey and a communications strategy developed during a 2-year period, during which a proposal for the installation of a unique cobalt 60 sourced sludge irradiator was being considered. This Sludge Recycling Facility proposal was supported by a plan that addressed knowledge needs of five target audiences -politicians, neighbours, regulatory and licensing agencies, city staff and future plant workers, and special interest groups. (author)

  2. Dose rate and total dose dependence of the 1/f noise performance of a GaAs operational amplifier during irradiation

    International Nuclear Information System (INIS)

    Hiemstra, D.M.

    1995-01-01

    A pictorial of a sectioned view of the torus of the International Thermonuclear Experimental Reactor (ITER) is shown. Maintenance and inspection of the reactor are required to be performed remotely. This is due to the high gamma radiation environment in vessel during inspection and maintenance activities. The custom GaAs operational amplifier is to be used to readout sensors on the in-vessel manipulator and inspection equipment. The gamma dose rate during maintenance and inspection is anticipated to be 3 Mrad(GaAs)/hour. Here, dose rate and total dose dependence of the 1/f noise performance of a custom GaAs MESFET operational amplifier during irradiation are presented. Dose rate dependent 1/f noise degradation during irradiation is believed to be due to electron trapping in deep levels, enhanced by backgating and shallow traps excited during irradiation. The reduction of this affect with accumulated total dose is believed to be due a reduction of deep level site concentration associated with substitutional oxygen. Post irradiation 1/f noise degradation is also presented.The generation-recombination noise observed post irradiation can be attributed to the production of shallow traps due to ionizing radiation

  3. Role of internal stresses in the transient of irradiation growth of zircaloy-2

    International Nuclear Information System (INIS)

    Tome, C.N.; Christodoulou, N.; Turner, P.A.; Miller, M.A.; Woo, C.H.; Root, J.; Holden, T.M.

    1995-07-01

    A 'self-consistent' polycrystalline model is used to simulate irradiation growth of Zircaloy-2 samples irradiated at about 330 K. The predictions of the model are compared with experimental measurements obtained from specimens irradiated in the Advanced Test Reactor (ATR) at Idaho Falls. Three types of material are studied here: annealed, cold worked in tension and cold worked by rolling. In general, the growth rate attains a steady-state value after it goes through a transient that depends on the initial state of the material. The transient growth behaviour is explained in terms of the evolution of intergranular residual stresses that are present in the sample, and in terms of the dislocation structure. From this study, information regarding irradiation creep and growth mechanisms occurring at the single crystal level is obtained. (author). 28 refs., 1 tab., 4 figs

  4. Irradiated fuel performance evaluation technology development

    International Nuclear Information System (INIS)

    Koo, Yang Hyun; Bang, J. G.; Kim, D. H.

    2012-01-01

    Alpha version performance code for dual-cooled annular fuel under steady state operation, so called 'DUOS', has been developed applying performance models and proposed methodology. Furthermore, nonlinear finite element module which could be integrated into transient/accident fuel performance code was also developed and evaluated using commercial FE code. The first/second irradiation and PIE test of annular pellet for dual-cooled annular fuel in the world have been completed. In-pile irradiation test DB of annular pellet up to burnup of 10,000 MWd/MTU through the 1st test was established and cracking behavior of annular pellet and swelling rate at low temperature were studied. To do irradiation test of dual-cooled annular fuel under PWR's simulating steady-state conditions, irradiation test rig/rod design/manufacture of mock-up/performance test have been completed through international collaboration program with Halden reactor project. The irradiation test of large grain pellets has been continued from 2002 to 2011 and completed successfully. Burnup of 70,000 MWd/MTU which is the highest burnup among irradiation test pellets in domestic was achieved

  5. Profitability of irradiation plants

    International Nuclear Information System (INIS)

    Bustos R, M.E.; Gonzalez F, C.; Liceaga C, G.; Ortiz A, G.

    1997-01-01

    In any industrial process it is seek an attractive profit from the contractor and the social points of view. The use of the irradiation technology in foods allows keep their hygienically, which aid to food supply without risks for health, an increment of new markets and a losses reduction. In other products -cosmetics or disposable for medical use- which are sterilized by irradiation, this process allows their secure use by the consumers. The investment cost of an irradiation plant depends mainly of the plant size and the radioactive material reload that principally is Cobalt 60, these two parameters are in function of the type of products for irradiation and the selected doses. In this work it is presented the economic calculus and the financial costs for different products and capacities of plants. In general terms is determined an adequate utility that indicates that this process is profitable. According to the economic and commercial conditions in the country were considered two types of credits for the financing of this projects. One utilizing International credit resources and other with national sources. (Author)

  6. Swelling and fracturing of borides under neutron irradiation

    International Nuclear Information System (INIS)

    Krainy, A.G.; Ogorodnikov, V.V.; Grinik, E.U.; Chirko, L.I.; Shinakov, A.A.

    1994-01-01

    The neutron irradiation of high temperature borides, which are included in boron-containing reactor materials, results in high internal stresses, leading to considerable swelling and micro- and macro-fracturing. Experimental results over a large range of temperature and fluences, show a change of damage mechanism for borides within 400-530 C: the macro-cracking with formation of annular and radial cracks is observed below this temperature zone. The accumulation of micro-fractures and the process of gas swelling take place at irradiation temperatures above 530 C. The effect of the high internal stresses is compared to external pressure. 12 refs., 4 figs

  7. Acid phosphatase activity in the liver of Indian desert gerbil (Meriones hurrianae, Jerdon) exposed to internal β-irradiation

    International Nuclear Information System (INIS)

    Gupta, N.K.; Kumar, A.; Sharma, S.

    1985-01-01

    Alterations in acid phosphatase activity in the liver of Indian desert gerbil after administration of 45 Ca are reported. There is an increase in the enzyme activity during early periods after 45 Ca administration. The response of the enzyme to internal irradiation was dose dependent. The enzyme activity remained elevated for a longer period in animals given the higher dose. With starting repair, the activity declined and control values were nearly obtained on the 28 posttreatment day in gerbils having received 37 kBq/g body weight of 45 Ca. Animals with higher doses could not survive till this period

  8. Localizing by autoradiography at -195 deg radioactive areas in rats exposed to a high flux of thermal neutrons, importance of phosphorus 32 in consecutive internal irradiation

    International Nuclear Information System (INIS)

    Chanteur, J.; Pellerin, P.

    1961-01-01

    Rats weighing 25 g were exposed for 5 mn to a flux of 6.10 12 thermal neutrons/cm 2 /s. Anatomical autoradiography at -195 deg. C has enabled the radioactive organs to be easily localised, to follow in course of time the decrease of radioactivity, and from it to deduce the probable nature of the numerous emitters in question. In particular, the phosphorus 32 has thus appeared to be one of those responsible for internal irradiation, general, on the one hand, by activating cellular phosphorus, local, on the other, by activating bony phosphates. Owing to this, an accidental irradiation by neutrons might have consequences that are both somatic (elective irradiation of the bone marrow) and genetic (activation of nucleic acids). The gamma spectrometry has confirmed the nature of certain other emitters. (author) [fr

  9. Neutron irradiation effects in pressure vessel steels and weldments

    Energy Technology Data Exchange (ETDEWEB)

    Ianko, L [International Atomic Energy Agency, Vienna (Austria). Div. of Nuclear Power; Davies, L M

    1994-12-31

    This paper deals with the effects of neutron irradiation on the steel and welds used for the pressure vessels which house the reactor cores in light water reactors: irradiation effects on mechanical properties and the shift in ductile-brittle transition temperature, importance of the knowledge of the neutron fluence and of the monitoring and surveillance programmes; empirical and mechanistic modelling of irradiation effects and the necessity of data extension to new operational limits; consequences on the manufacturing and structural design of materials and structures; mitigation of irradiation effects by annealing; international activities and programmes in the field of neutron irradiation effects on PV steels and welds. 37 refs., 22 figs.

  10. On-Going International Research Program on Irradiated Concrete Conducted by DOE, EPRI and Japan Research Institutions. Roadmap, Achievements and Path Forward

    Energy Technology Data Exchange (ETDEWEB)

    Le Pape, Yann [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Rosseel, Thomas M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-10-01

    The Joint Department of Energy (DOE)-Electric Power Research Institute (EPRI) Program (Light Water Reactor Sustainability (LWRS) Program–Material Pathway–Concrete and Long-Term Operation (LTO) Program) and US Nuclear Regulatory Commission (NRC) research studies aim at understanding the most prominent degradation modes and their effects on the long-term operation of concrete structures to nuclear power generation. Based on the results of the Expanded Materials Degradation Analysis (EMDA), (NUREG/CR-7153, ORNL/TM-2011/545), irradiated concrete and alkali-silica reaction (ASR)-affected concrete structures are the two prioritized topics of on-going research. This report focuses specifically on the topic of irradiated concrete and summarizes the main accomplishments obtained by this joint program, but also provides an overview of current relevant activities domestically and internationally. Possible paths forward are also suggested to help near-future orientation of this program.

  11. On-Going International Research Program on Irradiated Concrete Conducted by DOE, EPRI and Japan Research Institutions. Roadmap, Achievements and Path Forward

    International Nuclear Information System (INIS)

    Le Pape, Yann; Rosseel, Thomas M.

    2015-01-01

    The Joint Department of Energy (DOE)-Electric Power Research Institute (EPRI) Program (Light Water Reactor Sustainability (LWRS) Program Material Pathway Concrete and Long-Term Operation (LTO) Program) and US Nuclear Regulatory Commission (NRC) research studies aim at understanding the most prominent degradation modes and their effects on the long-term operation of concrete structures to nuclear power generation. Based on the results of the Expanded Materials Degradation Analysis (EMDA), (NUREG/CR-7153, ORNL/TM-2011/545), irradiated concrete and alkali-silica reaction (ASR)-affected concrete structures are the two prioritized topics of on-going research. This report focuses specifically on the topic of irradiated concrete and summarizes the main accomplishments obtained by this joint program, but also provides an overview of current relevant activities domestically and internationally. Possible paths forward are also suggested to help near-future orientation of this program.

  12. Degradation of corn starch under the influence of gamma irradiation

    Energy Technology Data Exchange (ETDEWEB)

    El Saadany, R M.A.; El Saadany, F M; Foda, Y H

    1976-01-01

    Irradiation of corn (maize) starch with different doses of gamma irradiation ranging from 1 x 10/sup 5/ rad to 1 x 10/sup 6/ rad resulted in the increase of starch acidity and reducing power. Molecular degradation was observed as a result of marked decrease in starch viscosity and intinsic viscosity as well as swelling capacity. The gelatinization time and temperature of the irradiated starch became shorter than in the control sample. Internal changes in the irradiated starch occured as a result of lowering the number of glucose unit per segment in the irradiated starch molecules. All changes were proportional to the doses of gamma irradiation used.

  13. Degradation of corn starch under the influence of gamma irradiation

    International Nuclear Information System (INIS)

    El Saadany, R.M.A.; El Saadany, F.M.; Foda, Y.H.

    1976-01-01

    Irradiation of corn (maize) starch with different doses of gamma irradiation ranging from 1 x 10 5 rad to 1 x 10 6 rad resulted in the increase of starch acidity and reducing power. Molecular degradation was observed as a result of marked decrease in starch viscosity and intinsic viscosity as well as swelling capacity. The gelatinization time and temperature of the irradiated starch became shorter than in the control sample. Internal changes in the irradiated starch occured as a result of lowering the number of glucose unit per segment in the irradiated starch molecules. All changes were proportional to the doses of gamma irradiation used. (orig.) [de

  14. Irradiation as an effective method of food conservation

    International Nuclear Information System (INIS)

    Stachowicz, W.

    1994-01-01

    Irradiation as an effective method for food preservation has been introduced. The worldwide history of radiation methods development has been shown. The state of art of international legislation connected with food irradiation and licensing of that technology in different countries has been reviewed. The list of food products commonly accepted for radiation conservation has also been performed

  15. Internalization and Subcellular Trafficking of Poly-l-lysine Dendrimers Are Impacted by the Site of Fluorophore Conjugation.

    Science.gov (United States)

    Avaritt, Brittany R; Swaan, Peter W

    2015-06-01

    Internalization and intracellular trafficking of dendrimer-drug conjugates play an important role in achieving successful drug delivery. In this study, we aimed to elucidate the endocytosis mechanisms and subcellular localization of poly-l-lysine (PLL) dendrimers in Caco-2 cells. We also investigated the impact of fluorophore conjugation on cytotoxicity, uptake, and transepithelial transport. Oregon green 514 (OG) was conjugated to PLL G3 at either the dendrimer periphery or the core. Chemical inhibitors of clathrin-, caveolin-, cholesterol-, and dynamin-mediated endocytosis pathways and macropinocytosis were employed to establish internalization mechanisms, while colocalization with subcellular markers was used to determine dendrimer trafficking. Cell viability, internalization, and uptake were all influenced by the site of fluorophore conjugation. Uptake was found to be highly dependent on cholesterol- and dynamin-mediated endocytosis as well as macropinocytosis. Dendrimers were trafficked to endosomes and lysosomes, and subcellular localization was impacted by the fluorophore conjugation site. The results of this study indicate that PLL dendrimers exploit multiple pathways for cellular entry, and internalization and trafficking can be impacted by conjugation. Therefore, design of dendrimer-drug conjugates requires careful consideration to achieve successful drug delivery.

  16. Irradiation test plan of instrumented capsule(05F-01K) for nuclear fuel irradiation in Hanaro (Revision 1)

    Energy Technology Data Exchange (ETDEWEB)

    Sohn, Jae Min; Kim, B. G.; Choi, M. H. (and others)

    2006-09-15

    An instrumented capsule was developed to be able to measure fuel characteristics, such as fuel temperature, internal pressure of fuel rod, fuel pellet elongation, and neutron flux, etc., during the irradiation test of nuclear fuel in HANARO. The instrumented capsule for measuring and monitoring fuel centerline temperature and neutron flux was designed and manufactured. And then, to verify the design of the instrumented capsule in the test hole, it was successfully irradiated in the test hole of HANARO from March 14, 2003 to June 1, 2003 (53.84 full power days at 24 MW). In the year of 2004, 3 test fuel rods and the 03F-05K instrumented fuel capsule were designed and fabricated to measure fuel centerline temperature, internal pressure of fuel rod, and fuel axial deformation during irradiation test. Now, this capsule was successfully irradiated in the test hole OR5 of HANARO reactor from April 27, 2004 to October 1, 2004 (59.5 full power days at 24-30 MW). The capsule and fuel rods have been be dismantled and fuel rods have been examined at the hot cell of IMEF. The instrumented fuel capsule (05F-01K) was designed and manufactured for a design verification test of the dual instrumented fuel rods. The irradiation test of the 05F-01K instrumented fuel capsule will be carried out at the OR5 vertical experimental hole of HANARO.

  17. Regulation on trading of irradiated food in Latin America

    Energy Technology Data Exchange (ETDEWEB)

    Mastro, N.L. Del [IPEN-CNEN/ SP, Travessa R. No. 400, Cidade Universitaria 05508-900 SP, Caixa Postal 11049, Cep 05422-970, Sao Paulo (Brazil)

    1997-12-31

    The International Consultative Group on food Irradiation (ICGFI) was established in 1984 under the aegis of FAO, IAEA and WHO, following the adoption by the Codex Alimentarius Commission of the Codex General Standard for Irradiated foods and the Recommended International Code of Practice for the Operation of radiation Facilities for the treatment of food. Today, several countries from South America and the Caribbean have regular representatives in the ICGFI. Some of the countries also have regulations about food irradiation: Argentina, Brazil, Chile, Costa Rica, Cuba, Mexico, Peru and Uruguay. After a meeting in Peru in April 1997, Latin American countries agreed to attempt a harmonization of national laws according to an approved regional model regulation on irradiated food. The model legislation is based on the principles of the Codex General Standard for Irradiated Foods and Recommended Code of Practice for the Operation of Radiation Facilities Used for the Treatment of Foods, as well as on the relevant recommendations of the ICGFI. The model regulation establishes the authority, objectives, scope, definitions, general requirements, facilities, control procedures, documentation inspection, labeling and also provides and advisory technological dose limit by classes of food. (Author)

  18. Regulation on trading of irradiated food in Latin America

    International Nuclear Information System (INIS)

    Mastro, N.L. Del

    1997-01-01

    The International Consultative Group on food Irradiation (ICGFI) was established in 1984 under the aegis of FAO, IAEA and WHO, following the adoption by the Codex Alimentarius Commission of the Codex General Standard for Irradiated foods and the Recommended International Code of Practice for the Operation of radiation Facilities for the treatment of food. Today, several countries from South America and the Caribbean have regular representatives in the ICGFI. Some of the countries also have regulations about food irradiation: Argentina, Brazil, Chile, Costa Rica, Cuba, Mexico, Peru and Uruguay. After a meeting in Peru in April 1997, Latin American countries agreed to attempt a harmonization of national laws according to an approved regional model regulation on irradiated food. The model legislation is based on the principles of the Codex General Standard for Irradiated Foods and Recommended Code of Practice for the Operation of Radiation Facilities Used for the Treatment of Foods, as well as on the relevant recommendations of the ICGFI. The model regulation establishes the authority, objectives, scope, definitions, general requirements, facilities, control procedures, documentation inspection, labeling and also provides and advisory technological dose limit by classes of food. (Author)

  19. Irradiation damage of SiC semiconductor device (I)

    International Nuclear Information System (INIS)

    Park, Ji Yeon; Kim, Weon Ju

    2000-09-01

    This report reviewed the irradiation damage of SiC semiconductor devices and examined a irradiation behavior of SiC single crystal as a pre-examination for evaluation of irradiation behavior of SiC semiconductor devices. The SiC single was crystal irradiated by gamma-beam, N+ ion and electron beam. Annealing examinations of the irradiated specimens also were performed at 500 deg C. N-type 6H-SiC dopped with N+ ion was used and irradiation doses of gamma-beam, N+ion and electron beam were up to 200 Mrad, 1x10 16 N + ions/cm 2 and 3.6 x 10 17 e/cm 2 and 1.08 x 10 18 e/cm 2 , respectively. Irradiation damages were analyzed by the EPR method. Additionally, properties of SiC, information about commercial SiC single crystals and the list of web sites with related to the SiC device were described in the appendix

  20. Irradiation damage of SiC semiconductor device (I)

    Energy Technology Data Exchange (ETDEWEB)

    Park, Ji Yeon; Kim, Weon Ju

    2000-09-01

    This report reviewed the irradiation damage of SiC semiconductor devices and examined a irradiation behavior of SiC single crystal as a pre-examination for evaluation of irradiation behavior of SiC semiconductor devices. The SiC single was crystal irradiated by gamma-beam, N+ ion and electron beam. Annealing examinations of the irradiated specimens also were performed at 500 deg C. N-type 6H-SiC dopped with N+ ion was used and irradiation doses of gamma-beam, N+ion and electron beam were up to 200 Mrad, 1x10{sup 16} N{sup +} ions/cm{sup 2} and 3.6 x 10{sup 17} e/cm{sup 2} and 1.08 x 10{sup 18} e/cm{sup 2} , respectively. Irradiation damages were analyzed by the EPR method. Additionally, properties of SiC, information about commercial SiC single crystals and the list of web sites with related to the SiC device were described in the appendix.

  1. Detection of irradiated meats by hydrocarbon method

    International Nuclear Information System (INIS)

    Goto, Michiko; Miyakawa, Hiroyuki; Fujinuma, Kenji; Ozawa, Hideki

    2005-01-01

    Meats, for example, lamb, razorback, wild duck and turkey were irradiated by gamma ray, and the amounts of hydrocarbons formed from fatty acids were measured. Since C 20:0 was found from wild duck and turkey. C 1-18:1 was recommended for internal standard. Good correlation was found between the amount of hydrocarbons and the doses of gamma irradiation. This study shows that such hydrocarbons induced after radiation procedure as C 1,7-16:2 , C 8-17:1 , C 1-14:1 , and C 15:0 may make it possible to detect irradiated lamb, razorback, wild duck and turkey. (author)

  2. Effect of x irradiation on the biochemical maturation of rat cerebellum: postnatal cell formation

    International Nuclear Information System (INIS)

    Patel, A.J.; Balazs, R.; Altman, J.; Anderson, W.J.

    1975-01-01

    Rat cerebellum was irradiated with 100 R daily doses from birth to 10 days of age, and the animals were studied during the next 13 days. The growth of the body and of the forebrain were little affected, but that of the cerebellum was severely retarded. This was primarily due to a depression in new cell acquisition which during the irradiation period was only about 10 percent of that in the controls. On the other hand, it seems that the development of cells formed prior to irradiation was little affected; at day 10, the average size and the RNA and protein contents of the cells were significantly higher than at birth and they were more than double the values observed in the control. However, cell formation was not irreversibly affected: in the fortnight after the termination of irradiation the rise in cell numbers was more than 80 percent of that occurring in the control rats. A relatively normal development of the cerebellar cortex was indicated by the finding that the molecular and the internal granular layers increased substantially in size during the postirradiation period. Further, by 23 days of age the external granular layer, which is a main germinal site in the cerebellum disappeared, as in controls, and the concentration of DNA (packing density of cells) and the cellular contents of RNA and protein were normal. However, restitution was not complete: at 23 days of age, in comparison with controls, the weight of the cerebellum was 60 percent and the reduction in the total number of cells (-40 percent) was similar to the reduction in size of the internal granular layer, which contains the highest concentration of nerve cells in the cerebellum. (U.S.)

  3. Pathogenesis of irradiation-induced cognitive dysfunction

    International Nuclear Information System (INIS)

    Abayomi, O.K.

    1996-01-01

    Neurocognitive dysfunction is a common sequela of cranial irradiation that is especially severe in young children. The underlying mechanisms of this disorder have not been described. The present review describes the role of the hippocampus and the anatomically related cortex in memory function and its marked susceptibility to ischemic and hypoxic injury. Based on studies of animal models of human amnesia and histopathological findings in the irradiated brain, the neurocognitive sequela of cranial irradiation can be seen to be mediated through vascular injury, resulting in ischemia and hypoxia in the hippocampal region. Recognition of the site and mechanisms of this injury may lead to the development of techniques to minimize the risks. (orig.)

  4. Irradiation effects in hydrated zirconium molybdate

    Energy Technology Data Exchange (ETDEWEB)

    Fourdrin, C., E-mail: chloe.fourdrin@polytechnique.edu [CEA Saclay, DEN/DANS/DPC/SECR/LSRM, 91 191 Gif-sur-Yvette (France); CEA Saclay, DSM/IRAMIS/SIS2M-UMR 3299/Lrad, 91 191 Gif-sur-Yvette (France); Esnouf, S. [CEA Saclay, DSM/IRAMIS/SIS2M-UMR 3299/Lrad, 91 191 Gif-sur-Yvette (France); Dauvois, V. [CEA Saclay, DEN/DANS/DPC/SECR/LSRM, 91 191 Gif-sur-Yvette (France); Renault, J.-P. [CEA Saclay, DSM/IRAMIS/SIS2M-UMR 3299/Lrad, 91 191 Gif-sur-Yvette (France); Venault, L. [CEN Valrho, DEN/DRCP/SCPS/LC2A, 30 207 Bagnols-sur-Ceze (France); Tabarant, M. [CEA Saclay, DEN/DANS/DPC/LRSI, 91 191 Gif-sur-Yvette (France); Durand, D. [CEA Saclay, DEN/DANS/DPC/SECR/LSRM, 91 191 Gif-sur-Yvette (France); Cheniere, A. [CEA Saclay, DEN/DANS/DPC/LRSI, 91 191 Gif-sur-Yvette (France); Lamouroux-Lucas, C. [CEA Saclay, DEN/DANS/DPC/SECR/LSRM, 91 191 Gif-sur-Yvette (France); Cochin, F. [AREVA NC Tour, AREVA, 92 084 Paris La Defense cedex (France)

    2012-07-15

    Hydrated zirconium molybdate is a precipitate formed during the process of spent nuclear fuel dissolution. In order to study the radiation stability of this material, we performed gamma and electron irradiation in a dose range of 10-100 kGy. XRD patterns showed that the crystalline structure is not affected by irradiation. However, the yellow original sample exhibits a blue-grey color after exposure. The resulting samples were analyzed by means of EPR and diffuse reflectance spectroscopy. Two sites for trapped electrons were evidenced leading to a d{sup 1} configuration responsible for the observed coloration. Moreover, a third defect corresponding to a hole trapped on oxygen was observed after electron irradiation at low temperature.

  5. Pathogenesis of irradiation-induced cognitive dysfunction

    Energy Technology Data Exchange (ETDEWEB)

    Abayomi, O.K. [Howard Univ. Hospital, Washington, DC (United States). Dept. of Radiation Oncology

    1996-12-31

    Neurocognitive dysfunction is a common sequela of cranial irradiation that is especially severe in young children. The underlying mechanisms of this disorder have not been described. The present review describes the role of the hippocampus and the anatomically related cortex in memory function and its marked susceptibility to ischemic and hypoxic injury. Based on studies of animal models of human amnesia and histopathological findings in the irradiated brain, the neurocognitive sequela of cranial irradiation can be seen to be mediated through vascular injury, resulting in ischemia and hypoxia in the hippocampal region. Recognition of the site and mechanisms of this injury may lead to the development of techniques to minimize the risks. (orig.).

  6. Revascularization of autogenous skin grafts placed on irradiated tissue

    International Nuclear Information System (INIS)

    Ueda, M.; Torii, S.; Kaneda, T.; Oka, T.

    1982-01-01

    Vascular changes in rat skin after irradiation were examined microangiographically. Revascularization of the skin transplanted during the chronic stage after irradiation was also studied. The results obtained through these examinations revealed higher vascular densities at the acute and the subacute stages, and low values at the chronic stages compared with those of the control. Furthermore, when the skin grafts were transplanted to the irradiated beds in the chronic stage, primary revascularization was scant, and the inhibited capillary proliferation in the recipient sites prevented new vessel penetration. This explains why grafts transplanted to previously irradiated beds fail to survive

  7. Technology of food preservation by irradiation

    International Nuclear Information System (INIS)

    Thomas, Paul

    1997-01-01

    Food Technology Division, Bhabha Atomic Research Centre, Mumbai has demonstrated that radiation processing of foods can contribute to nations food security by reducing post-harvest losses caused by insect infestation, microbial-spoilage and physiological changes. The technology has commercial potential for the conservation of cereals, pulses and their products, spices, onions, potatoes, garlic, some tropical fruits, sea foods, meat and poultry. Irradiation can ensure hygienic quality in foods including frozen foods by eliminating food borne pathogens and parasitic organisms. It offers a viable environment friendly alternative to chemical fumigants for quarantine treatment against insect pests in agricultural and horticultural products entering international trade. The safety and nutritional adequacy of irradiated foods for human consumption is well established. About 40 countries including India have regulations permitting irradiation of foods and 28 countries are irradiating foods for processing industries and institutional catering

  8. Food irradiation: a reply to the food industry; and reply

    International Nuclear Information System (INIS)

    Brynjolfsson, Ari; Piccioni, R.

    1989-01-01

    In a reply to a critical article on food irradiation, Dr Ari Brynjolfsson of the International Facility of Food Irradiation Technology contends that the food industry has no interest in supporting the nuclear industry by using nuclear wastes as radiation sources - high voltage electron generators are more practical and economic. Also World Health Organization Toxicologists have concluded irradiated food is safe toxicologically, nutritionally and microbiologically. A study in India found no difference in polyploidy in children fed irradiated or non-irradiated food. In reply Dr Richard Piccioni suggests that the cancer risk from irradiated food is high, that the Indian study showed that irradiated food can cause an increase in polyploidy in well-fed adults, and suggests that Cs-137 from nuclear reactors will be used in food irradiation. (U.K.)

  9. Radiochemistry Results from the IER-163 COMET Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Jackman, Kevin R. [Los Alamos National Laboratory; Bredeweg, Todd Allen [Los Alamos National Laboratory; Schake, Ann R. [Los Alamos National Laboratory; Oldham, Warren J. [Los Alamos National Laboratory; Bounds, John Alan [Los Alamos National Laboratory; Sanchez, Rene Gerardo [Los Alamos National Laboratory; Attrep, Moses [C-NR: NUCLEAR & RADIOCHEMISTRY; Rundberg, Robert S. [Los Alamos National Laboratory

    2015-08-07

    The COMET assembly at the National Criticality Experiments Research Center (NCERC) at the Nevada National Security Site (NNSS) was used to irradiate twelve foils in September 2011. The intention of this irradiation was to measure 'peak yield' fission product activities, activation products, and so-called 'endpoint R values' for different foil materials in a non-thermal neutron spectrum. After irradiation, several of the foils were shipped to Los Alamos National Laboratory (LANL) for radiochemical analysis. The results from the non-destructive and radiochemical analyses of six of these foils are presented.

  10. Effect of X-ray irradiation on the physical and chemical quality of ...

    African Journals Online (AJOL)

    The use of irradiation as a phytosanitary treatment has expanded in recent years. It plays important roles in developed and developing countries, facilitating international trade in irradiated fresh fruit. To evaluate the potential of X-ray irradiation as a quarantine treatment for America red globe grapes, we investigated the ...

  11. Application of irradiation techniques to food and foodstuffs

    International Nuclear Information System (INIS)

    Kwon, Joong Ho; Byun, Myung Woo; Kim, Suc Won; Yang, Jae Seung; Cho, Han Ok

    1991-02-01

    A preservation study of dried fish, anchovies, has been conducted to determine the effect of gamma irradiation and laminated(nylon/polyethylene) film packaging on microbiological, physicochemical and organoleptic qualities of stored samples under room, refrigeration and freezing temperatures. Irradiation at less than 5 kGy and NY/PE-laminated film packaging are anticipated to be significantly effective for over 10 months in terms of improving the hygienic quality and extending the storage life of boiled-dried anchovies. In a survey participating 700 consumers, respondents preferred irradiated food to chemically-treated one. However, majority of respondents (55.7 %) was ignorant of the fact that the Korean government and international organizations concerned have approved the wholesomeness of irradiated food. Insufficiency of public information and understanding for irradiated food was indicated as a major cause for retardation of commercial utilization of food irradiation technology. In a response concerning perception and acceptance toward irradiated food, there was a significant difference between radiation worker and the general public. (Author)

  12. Detection of irradiation by thermo- and chemiluminescence

    International Nuclear Information System (INIS)

    Boegl, K.W.; Heide, Lydia

    1991-01-01

    In a number of countries it is not currently allowed to bring irradiated food into the market. On the other hand, increasing numbers of permits have been issued in many countries during the past years for the use of ionizing radiation in certain areas of food technology, because national and international bodies recommended food irradiation to be accepted. Therefore, the regulations concerning irradiated food will remain very different between individual countries during the coming years. This is the background for the increasing interest in developing methods that allow identification of irradiated food. During the past few years it has become increasingly clear that detailed labelling of irradiated food will need to be included in food regulations in many parts of the world. Identification methods will be helpful in proving compliance with these labelling regulations. Many investigations have been carried out in an effort to design reliable methods for detecting whether or not a food has been irradiated. Attempts have been to apply physical, chemical and biological forms of measurement. The results show that no general method exists that is applicable for all foods. For individual foodstuffs, several methods are possible, depending on the type of food, but none has as yet been internationally tested and accepted as reliable for all types of irradiated food. Two techniques are currently very close to practical application. On one side, the luminescence techniques have been tested in a European collaborative study with good results, so that these luminescence techniques have been included in the official collection of food control methods in the Federal Republic of Germany in 1989. On the other side, electron spin resonance spectroscopy has been demonstrated as well suited for detection purposes for different types of food containing bones, shells or seed, like chicken and strawberries. A European collaborative study is also in preparation. (author)

  13. White Paper Summary of 2nd ASTM International Workshop on Hydrides in Zirconium Alloy Cladding

    Energy Technology Data Exchange (ETDEWEB)

    Sindelar, R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Louthan, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); PNNL, B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-05-29

    This white paper recommends that ASTM International develop standards to address the potential impact of hydrides on the long term performance of irradiated zirconium alloys. The need for such standards was apparent during the 2nd ASTM International Workshop on Hydrides in Zirconium Alloy Cladding and Assembly Components, sponsored by ASTM International Committee C26.13 and held on June 10-12, 2014, in Jackson, Wyoming. The potentially adverse impacts of hydrogen and hydrides on the long term performance of irradiated zirconium-alloy cladding on used fuel were shown to depend on multiple factors such as alloy chemistry and processing, irradiation and post irradiation history, residual and applied stresses and stress states, and the service environment. These factors determine the hydrogen content and hydride morphology in the alloy, which, in turn, influence the response of the alloy to the thermo-mechanical conditions imposed (and anticipated) during storage, transport and disposal of used nuclear fuel. Workshop presentations and discussions showed that although hydrogen/hydride induced degradation of zirconium alloys may be of concern, the potential for occurrence and the extent of anticipated degradation vary throughout the nuclear industry because of the variations in hydrogen content, hydride morphology, alloy chemistry and irradiation conditions. The tools and techniques used to characterize hydrides and hydride morphologies and their impacts on material performance also vary. Such variations make site-to-site comparisons of test results and observations difficult. There is no consensus that a single material or system characteristic (e.g., reactor type, burnup, hydrogen content, end-of life stress, alloy type, drying temperature, etc.) is an effective predictor of material response during long term storage or of performance after long term storage. Multi-variable correlations made for one alloy may not represent the behavior of another alloy exposed to

  14. MONJU AS AN INTERNATIONAL ASSET: INTERNATIONAL ASSISTANCE AND COOPERATION

    International Nuclear Information System (INIS)

    Rodriguez, G.; Wisner, R.S.; Stuart, R.

    2004-01-01

    The role of the fast breeder reactor prototype Monju has expanded to meet the challenges of the 21st century. Today instead of being merely a demonstration of an economical, safe, environmentally responsible source of energy, as originally designed, it has also the capability to be transformed into a unique International Irradiations Test Facility. The potential for Monju's role in the Generation IV nuclear energy systems development, and fast reactor research and development area is clear. Its incomparable fast neutron spectrum density will be a major interest not only for Sodium Fast Reactor but for all the Generation IV concepts. As Monju's potential future role is laid out, plans for future tests can be made. Tests of advanced fuels and materials in support of the Advanced Fuel Cycle Initiative, as well as Minor Actinide Burning can be envisaged. Tests planned on transmutation of minor actinides have the objectives of an industrial demonstration of the reduction of toxic wastes and the stewardship burden of the long-lived wastes. Tests and demonstrations carried out at Monju will provide a bridge from existing Generation III fast reactor systems, now in the later stages of their projected operational lifetimes, to Generation IV nuclear energy systems. The JNC founded the International Cooperation and Technology Development Center and the International Research Fellowship program to facilitate this international effort. The Center exists specifically to formulate and perform projects ensuring the maximum technical benefit from Monju. The staff includes physicists, engineers and nuclear industry leaders from around the world. Research Fellowships center is based on several technical areas: advanced instrumentation, inspection techniques, plant reliability and safety, nucleonics, sodium handling technologies, irradiation and experiment management and coordination and advanced post-irradiation examination capabilities and techniques. This paper describes the recent

  15. Current Practices in Global/International Advanced Pharmacy Practice Experiences: Home/Host Country or Site/Institution Considerations.

    Science.gov (United States)

    Alsharif, Naser Z; Dakkuri, Adnan; Abrons, Jeanine P; Williams, Dennis; Ombengi, David N; Zheng, HaiAn; Al-Dahir, Sara; Tofade, Toyin; Gim, Suzanna; O'Connell, Mary Beth; Ratka, Anna; Dornblaser, Emily

    2016-04-25

    International outreach by schools and colleges of pharmacy is increasing. In this paper, we provide current practice guidelines to establish and maintain successful global/international advanced pharmacy practice experiences (G/I APPEs) with specific recommendations for home/host country and host site/institution. The paper is based on a literature review (2000-2014) in databases and Internet searches with specific keywords or terms. Educational documents such as syllabi and memoranda of understanding (MoUs) from pharmacy programs were also examined. In addition, a preliminary draft was developed and the findings and recommendations were reviewed in a 90-minute roundtable discussion at the 2014 American Association of Colleges of Pharmacy Annual Meeting. Recommendations for the host country include travel considerations (eg, passport, visa, air travel), safety, housing, transportation, travel alerts and warnings, health issues, and financial considerations. For the home country, considerations for establishment of G/I APPE site (eg, vetting process, MoU, site expectations) are described. The paper is a resource for development of new G/I APPEs and provides guidance for continuous quality improvement of partnerships focusing on G/I pharmacy education.

  16. Short and long-term effects of internal irradiation on the murine hepatic glycogen and its metabolizing enzymes

    International Nuclear Information System (INIS)

    Gupta, N.K.

    1990-01-01

    Glycogen content and the activities of phosphorylase, phosphorhexose isomerase, glucose 6-phosphatase, glycogen synthesis' phosphorylase and succinate dehydrogenase have been biochemically determined in the liver of Swiss albino mice after radiocalcium internal irradiation up to 225 days posttreatment. Increase in the glycogen content and glycogen synthesis phosphorylase with a concomitant decrease in the activities of phosphorylase, glucose 6-phosphatase, phosphohexose isomerase and succinate dehydrogenase reveals inhibited glycolysis in the presence of normal glyogenesis and inhibited Kreb's cycle in the liver during early intervals. Decrease in the glycogen content at later stages along with decrease in the activities of all these enzymes is probably because of an inhibited glycogen biosynthesis and its catabolism through HMP shunt. (orig.)

  17. Clinical effects of chronic irradiation in conditions of Chernobyl exclusion zone

    International Nuclear Information System (INIS)

    Nyagu, A.I.; Loganovskij, K.N.; Kostyuchenko, V.G.

    1999-01-01

    Threshold doses for des adaptation syndrome development during chronic external and internal irradiation were found. Effects of small dose accumulation were established. Chronic irradiation is resulted in different dystrophic processes, psychosomatic violations and in increase of stochastic effects

  18. Gamma irradiation as a means of food preservation in Canada

    International Nuclear Information System (INIS)

    Pim, L.R.

    1983-11-01

    The status of food irradiation has changed significantly in the past three years with the establishment of inter-national standards by the Codex Alimentarious Commission of the United Nations and the setting of wholesomeness guidelines for a wide variety of foods by the Joint FAO/IAEA/WHO Expert Committee on Food Irradiation. This report examines: the technology of food irradiation; the biochemical, nutritional and microbiological effects on food, with special attention paid to radiolytic products and their possible toxicity; the economic feasibility of a food irradiation industry; food irradiation in Canada -experience, outlook and regulatory proposals, and consumer reaction to irradiated foods; and presents conclusions and recommendations to Health and Welfare Canada and to Consumer and Corporate Affairs Canada

  19. Measurements of the angular distribution of diffuse irradiance

    DEFF Research Database (Denmark)

    Andersen, Elsa; Nielsen, Kristian Pagh; Dragsted, Janne

    2015-01-01

    Advanced solar resource assessment and forecasting is necessary for optimal solar energy utilization. In order to investigate the short-term resource variability, for instance caused by clouds it is necessary to investigate how clouds affect the solar irradiance, including the angular distribution...... of the solar irradiance. The investigation is part of the Danish contribution to the taskforce 46 within the International Energy Agency and financed by the Danish Energy Agency. The investigation focuses on the distribution of the diffuse solar irradiance and is based on horizontal measurements of the solar...

  20. Ion irradiation to simulate neutron irradiation in model graphites: Consequences for nuclear graphite

    Science.gov (United States)

    Galy, N.; Toulhoat, N.; Moncoffre, N.; Pipon, Y.; Bérerd, N.; Ammar, M. R.; Simon, P.; Deldicque, D.; Sainsot, P.

    2017-10-01

    Due to its excellent moderator and reflector qualities, graphite was used in CO2-cooled nuclear reactors such as UNGG (Uranium Naturel-Graphite-Gaz). Neutron irradiation of graphite resulted in the production of 14C which is a key issue radionuclide for the management of the irradiated graphite waste. In order to elucidate the impact of neutron irradiation on 14C behavior, we carried out a systematic investigation of irradiation and its synergistic effects with temperature in Highly Oriented Pyrolitic Graphite (HOPG) model graphite used to simulate the coke grains of nuclear graphite. We used 13C implantation in order to simulate 14C displaced from its original structural site through recoil. The collision of the impinging neutrons with the graphite matrix carbon atoms induces mainly ballistic damage. However, a part of the recoil carbon atom energy is also transferred to the graphite lattice through electronic excitation. The effects of the different irradiation regimes in synergy with temperature were simulated using ion irradiation by varying Sn(nuclear)/Se(electronic) stopping power. Thus, the samples were irradiated with different ions of different energies. The structure modifications were followed by High Resolution Transmission Electron Microscopy (HRTEM) and Raman microspectrometry. The results show that temperature generally counteracts the disordering effects of irradiation but the achieved reordering level strongly depends on the initial structural state of the graphite matrix. Thus, extrapolating to reactor conditions, for an initially highly disordered structure, irradiation at reactor temperatures (200 - 500 °C) should induce almost no change of the initial structure. On the contrary, when the structure is initially less disordered, there should be a "zoning" of the reordering: In "cold" high flux irradiated zones where the ballistic damage is important, the structure should be poorly reordered; In "hot" low flux irradiated zones where the ballistic

  1. Development of irradiation technique on controlling food contamination residue

    International Nuclear Information System (INIS)

    Liu Bin; Xiong Shanbai; Xiong Guangquan; Cheng Wei; Chen Yuxia; Liao Tao; Li Xin; Lin Ruotai

    2010-01-01

    The current state of the researches of irradiation technology on controlling food mycotoxin, pesticide, veterinary drugs and fishery drugs residue was summarized. And the degradation rate, mechanism, products and toxicities of food contamination were expatiated. The free radical from irradiation attack the site of weaker bond, and the less or more toxic substances were produced, which lead to the degradation of the food contamination. The limitations and future application of irradiation technique on controlling food contamination were also analyzed. (authors)

  2. Near-ultraviolet removal rates for subgingival dental calculus at different irradiation angles

    Science.gov (United States)

    Schoenly, Joshua E.; Seka, Wolf D.; Rechmann, Peter

    2011-07-01

    The laser ablation rate of subgingival dental calculus irradiated at a 400-nm-wavelength, 7.4-mJ pulse energy, and 85- and 20-deg irradiation angles is measured using laser triangulation. Three-dimensional images taken before and after irradiation create a removal map with 6-μm axial resolution. Fifteen human teeth with subgingival calculus are irradiated in vitro under a cooling water spray with an ~300-μm-diam, tenth-order super-Gaussian beam. The average subgingival calculus removal rates for irradiation at 85 and 20 deg are 11.1+/-3.6 and 11.5+/-5.9 μm/pulse, respectively, for depth removal and 4.5+/-1.7×105 and 4.8+/-2.3×105 μm3/pulse, respectively, for volume removal. The ablation rate is constant at each irradiation site but varies between sites because of the large differences in the physical and optical properties of calculus. Comparison of the average depth- and volume-removal rates does not reveal any dependence on the irradiation angle and is likely due to the surface topology of subgingival calculus samples that overshadows any expected angular dependence.

  3. The wholesomeness of irradiated foodstuffs

    International Nuclear Information System (INIS)

    Elias, P.S.

    1992-01-01

    The evaluation of the wholesomeness of irradiated foodstuffs is based on a large body of scientific data mainly from four areas: the radiochemical effects of ionising radiation, the toxicity of irradiated foodstuffs, the microbiological effects and the nutritional aspects. The technology of processing food with ionising radiation with the objectives of decontamination, disinfestation and of extended shelf life has been investigated in many countries for more than fourty years. The wholesomeness of irradiated food has been examined over the same period through intensive research into the radiochemical, toxicological, microbiological and nutritional changes resulting from this processing technology. The ultimate result was the decision of the international Joint FAO/IAEA/WHO Expert Committee, published in 1981, to regard in general the irradiation of food in the dose range up to 10 kGy as an acceptable processing technology and to consider foodstuffs so treated as wholesome. A large number of national authorities came to similar conclusions following their own evaluation of the available data. The most important scientific results, the general restrictions on the use of food irradiation, and existing prejudices will be dealt with. (orig.) [de

  4. 2. National Seminar on Acceptance and Trade of Irradiated Foods. Proceedings

    International Nuclear Information System (INIS)

    1997-01-01

    This proceedings is a compilation of 18 papers presented at the National Seminar on Acceptance and Trade of Irradiated Food, held in Toluca, Mexico, 27-29 October 1997. It generally deals with international and national legal, technological, health and commercial aspects of food irradiation. Public confidence and consumer acceptance of irradiated food stuff is also the subject of the seminar

  5. Recent trend of food irradiation in the world

    International Nuclear Information System (INIS)

    Hayashi, Tohru

    1989-01-01

    Forty years have elapsed since the full scale research on food irradiation was begun, and the irradiation of potatoes, which was the first commercial food irradiation in the world, was started in Japan 15 years ago. In 1960s and 1970s, the development of food irradiation technology and the research for the examination of the safety of irradiated foods were mainly carried out. It was clarified that the dose required for obtaining the effect that irradiation aimed at is 0.03-0.2 kGy for suppressing germination and root generation, 0.2-1 kGy for delaying the ripening of fruits, 0.1-1 kGy for killing insects, 1-10 kGy for general sterilization and 25-50 kGy for sterilization, and also the soundness of irradiated foods was confirmed. In 1980s, the practical use of food irradiation became to be advanced in various countries, and the countries where food irradiation is carried out are increasing now. When food irradiation becomes to be actively carried out, the system for managing the execution of food irradiation and the distribution of irradiated foods becomes important, and at present the investigation for creating this system is advanced internationally. The opinion on the soundness of irradiated foods, the state of permission of food irradiation in various countries, the state of practical use of food irradiation in various countries, and the establishment of the management system for food irradiation are described. (K.I.)

  6. Regulatory aspects of food irradiation

    International Nuclear Information System (INIS)

    Nowlan, N.V.

    1985-01-01

    The role of the Nuclear Energy Board in relation to radiation safety in Ireland is described. The Board has the duty to control by licence all activities involving ionizing radiation, as well as providing advice and information to the Government on all aspects of radiation safety. The licensing procedures used by the Board, including site approval, construction, commissioning, source loading and commercial operation, in the licensing of large irradiation facilities were described, and an outline of the proposed new legislation which may become necessary if and when the irradiation of food for commercial purposes begins in Ireland is given

  7. Studies on the improvement of irradiation process

    International Nuclear Information System (INIS)

    Kim, Ki Yup; Pyun, Hyung Chick; Yoon, Byung Mok; Nho, Young Chang; Lee, Young Keun; Park, Soon Chul; Na, Bong Joo; Yoo, Young Soo

    1991-01-01

    On the basis of analysis and examination for efficient maintenance and operation of the facility, the method of improving irradiation process was discussed so that we may extend the applicability of irradiation technique to various materials and accelerate nation-wide propagation of radiation processing technology. Preparations have been made for transfer, installation, and operation of the irradiation facilities in radiation application building which will be completed at the headquarter site by the end of 1992. The qualification testing apparatus for nuclear power station cables was conceptually designed to investigate the degradation behavior of the cables under a simulated LOCA(Loss of Coolant Accident) environments. (Author)

  8. Analysis of irradiated biogenic amines by computational chemistry and spectroscopy

    International Nuclear Information System (INIS)

    Oliveira, Jorge L.S.P.; Borges Junior, Itamar; Cardozo, Monique; Souza, Stefania P.; Lima, Antonio L.S.; Lima, Keila S.C.

    2011-01-01

    Biogenic Amines (B A) are nitrogenous compounds able to cause food poisoning. In this work, we studied the tyramine, one of the most common BA present in foods by combining experimental measured IR (Infrared) and GC/MS (Gas Chromatograph / Mass Spectrometry) spectra and computational quantum chemistry. Density Functional Theory (DFT) and the Deformed Atoms in Molecules (DMA) method was used to compute the partition the electronic densities in a chemically-intuitive way and electrostatic potentials of molecule to identify the acid and basic sites. Trading pattern was irradiated using a Cs 137 radiator, and each sample was identified by IR and GC/MS. Calculated and experimental IR spectra were compared. We observed that ionizing gamma irradiation was very effective in decreasing the population of standard amine, resulting in fragments that could be rationalized through the quantum chemistry calculations. In particular, we could locate the acid and basic sites of both molecules and identify possible sites of structural weaknesses, which allowed to propose mechanistic schemes for the breaking of chemical bonds by the irradiation. Moreover, from this work we hope it will be also possible to properly choose the dose of gamma irradiation which should be provided to eliminate each type of contamination. (author)

  9. Effect of γ-irradiated DNA on the activity of DNA polymerase

    International Nuclear Information System (INIS)

    Leadon, S.A.; Ward, J.F.

    1981-01-01

    A cell-free assay was developed to measure the effect of γ-irradiated DNA template on the ability of DNA polymerase to copy unirradiated template. Doses as low as 1 krad were able to decrease (approx. 15%) the activity of both bacterial and mammalian DNA polymerases in the assay. The percentage of polymerase activity decreased as the dose received by the template increased. The reduction in DNA polymerase activity was shown to be due to an inhibition of the enzyme by the irradiated DNA. Irradiated poly(dA-dT) was more effective in reducing polymerase activity than calf thymus DNA. Thus the polymerase-inhibition site(s) appears to be associated with base damage, specifically adenine or thymine. Using a free-radical scavenger, OH radicals were found to be involved in producing the damage sites. The interaction between irradiated DNA and DNA polymerase was found to be specific for the enzyme and not for other proteins present in the assay. The inhibition of DNA polymerase occurred prior to or during the initiation of DNA synthesis rather than after initiation of synthesis, i.e., during elongation

  10. Incidence and risk factors for surgical site infection after open reduction and internal fixation of tibial plateau fracture: A systematic review and meta-analysis.

    Science.gov (United States)

    Shao, Jiashen; Chang, Hengrui; Zhu, Yanbin; Chen, Wei; Zheng, Zhanle; Zhang, Huixin; Zhang, Yingze

    2017-05-01

    This study aimed to quantitatively summarize the risk factors associated with surgical site infection after open reduction and internal fixation of tibial plateau fracture. Medline, Embase, CNKI, Wanfang database and Cochrane central database were searched for relevant original studies from database inception to October 2016. Eligible studies had to meet quality assessment criteria according to the Newcastle-Ottawa Scale, and had to evaluate the risk factors for surgical site infection after open reduction and internal fixation of tibial plateau fracture. Stata 11.0 software was used for this meta-analysis. Eight studies involving 2214 cases of tibial plateau fracture treated by open reduction and internal fixation and 219 cases of surgical site infection were included in this meta-analysis. The following parameters were identified as significant risk factors for surgical site infection after open reduction and internal fixation of tibial plateau fracture (p operative time (OR 2.15; 95% CI 1.53-3.02), tobacco use (OR 2.13; 95% CI 1.13-3.99), and external fixation (OR 2.07; 95% CI 1.05-4.09). Other factors, including male sex, were not identified as risk factors for surgical site infection. Patients with the abovementioned medical conditions are at risk of surgical site infection after open reduction and internal fixation of tibial plateau fracture. Surgeons should be cognizant of these risks and give relevant preoperative advice. Copyright © 2017. Published by Elsevier Ltd.

  11. Regeneration of used activated carbon by electron beam irradiation

    International Nuclear Information System (INIS)

    Arai, H.; Hosono, M.; Zhu, G.; Miyata, T.

    1992-01-01

    The adsorbing power of granular activated carbons which adsorbed sodium laurylsulfate were most effectively recovered by irradiation of high energy electron beams in nitrogen stream, and the carbon was hardly lost by irradiation. The regeneration was induced mainly by microscopic heating of adsorption sites. Regeneration was also confirmed by adsorption endotherms. Regeneration cost was tentatively evaluated. (author)

  12. On-site and off-site activities

    International Nuclear Information System (INIS)

    Martin, H.D.

    1986-01-01

    Design principles for NPP training programs. Effects of NPP contracts. Effects of domestic industrial activities. The role of international bodies. Requirements for on-site training. Training abroad, technical, financial and social aspects. Training center on-site, an evaluation. (orig.)

  13. Repair of mouse haemopoiesis at later times after long-term external (137Cs) and internal (3H) irradiation

    International Nuclear Information System (INIS)

    Luzanov, V.M.; Murzina, L.D.; Kirillova, E.N.

    1982-01-01

    In experiments on CBA mice it was shown that the haemopoiesis recovery was incomplete during 18 months after termination of internal exposure to tritium oxide or external γ-irradiation in the equivalent daily and cumulative doses. in mice given the radionuclide, the increment of CFUsub(s) and bone marrow nucleate cells was accompanied by leuko- and thrombocytopenia. In mice externally exposed to γ-rays, cytopenia did not develop at a lower content of CFUsub(s) and myelocaryocytes. It is suggested that the revealed diversions in the pattern of recovery of the haemopoiesis of mice of the compared groups are conditioned by the changes in functional activity of haemopoietic stem cells

  14. Annealing of dislocation loops in neutron-irradiated copper investigated by positron annihilation

    International Nuclear Information System (INIS)

    Gauster, W.B.; Mantl, S.; Schober, T.; Triftshauser, W.

    1975-01-01

    Positron annihilation angular correlation measurements were carried out on neutron-irradiated copper as a function of annealing temperature. Two types of specimens were used: single crystals irradiated with fast neutrons, and 10 B-doped polycrystalline samples irradiated with thermal neutrons. All irradiations were at approximately 320 0 K. A structure in the annealing curve, not previously observed by other techniques, indicates that between 460 and 600 0 K the dislocation loops present after irradiation dissociate and more effective positron trapping sites are formed. (auth)

  15. Food irradiation as a quarantine treatment

    International Nuclear Information System (INIS)

    Ignatowicz, S.

    1998-01-01

    Because of multiplicity of invertebrate pests of fresh and durable agricultural products which are treaded internationally there are frequent instances were products are unacceptable without an approved prior disinfestation treatment. The majority of these pests are regulated by quarantine inspections at the ports of exit and entry. Where there is risk of rejection of products if quarantine pests are found at inspection it is frequently prudent to apply a disinfestation treatment. Control of these pests in agriculture produce by fumigation is no longer desirable from the points of human health and global environment. Irradiation could be feasible and practical alternative with a broad applicability to commodities and pests. Quarantine disinfestation of most agricultural products seems to be achievable at the recommended generic dose of 300 Gy. Because irradiation applied at doses ranging about 300 Gy does not cause immediate mortality of all insects, mites or nematodes, live pests could be present after treatment of agricultural produce intended for international trade. In such case a marker of irradiation that is easily applied may be very useful in allaying concerns of some quarantine inspectors that inevitably occur when a living insect of quarantine importance is found in a shipment. (author)

  16. Irradiation tests of radiation resistance optical fibers for fusion diagnostic application

    Science.gov (United States)

    Kakuta, Tsunemi; Shikama, Tatsuo; Nishitani, Takeo; Yamamoto, Shin; Nagata, Shinji; Tsuchiya, Bun; Toh, Kentaro; Hori, Junichi

    2002-11-01

    To promote development of radiation-resistant core optical fibers, the ITER-EDA (International Thermonuclear Experimental Reactor-Engineering Design Activity) recommended carrying out international round-robin irradiation tests of optical fibers to establish a reliable database for their applications in the ITER plasma diagnostics. Ten developed optical fibers were irradiation-tested in a Co-60 gamma cell, a Japan Materials Testing Reactor (JMTR). Also, some of them were irradiation tested in a fast neutron irradiation facility of FNS (Fast Neutron Source), especially to study temperature dependence of neutron-associated irradiation effects. Included were several Japanese fluorine doped fibers and one Japanese standard fiber (purified and undoped silica core), as well as seven Russian fibers. Some of Russian fibers were drawn by Japanese manufactures from Russian made pre-form rods to study effects of manufacturing processes to radiation resistant properties. The present paper will describe behaviors of growth of radiation-induced optical transmission loss in the wavelength range of 350-1750nm. Results indicate that role of displacement damages by fast neutrons are very important in introducing permanent optical transmission loss. Spectra of optical transmission loss in visible range will depend on irradiation temperatures and material parameters of optical fibers.

  17. Food Irradiation Newsletter. V. 12, no. 1

    International Nuclear Information System (INIS)

    1988-04-01

    This Newsletter reports summaries of work carried out in the past year. A coordinated research programme on ''Use of Irradiation to Control Infectivity of Food-borne Parasites'' was implemented in early 1987. The first Research Coordination Meeting of this programme was held in Poznan, Poland, August 1987 and its report is included. Another important development is ''Food Irradiation Plant: Project Profile'' of the International Finance Corporation (IFC), a subsidiary of the World Bank. IFC is in principle ready to finance installations on food irradiation facilities in developing countries provided that the proposals are submitted through Governmental channels. Details on developing such proposals for possible funding by IFC are included. This issue also contains a supplement, an up-dated list of clearance of irradiated foods. Refs, 1 fig., 1 tab

  18. Food Irradiation Newsletter. V. 13, no. 2

    International Nuclear Information System (INIS)

    1989-10-01

    This issue contains reports of the two co-ordination meetings convened in San Jose, Costa Rica, and Bangkok, Thailand, last year. It also details questions raised by the International Organization of Consumers Unions (IOCU) on the safety of irradiated foods during the International Conference on the Acceptance, Control of and Trade in Irradiated Food, organized by FAO, IAEA, WHO, ITC-UNCTAD/GATT, Geneva, Switzerland, December 1988. The questions were answered by experts appointed by the Joint Secretariat during the Conference. Both questions and answers were documented and made available to all delegations. The WHO has recently published the official version of the documents which have been sent to all its official contact points and are reproduced in this newsletter. Refs, figs and tabs

  19. Assessment of repair welding technologies of irradiated materials

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    Damages on reactor internals of stainless steels caused by stress corrosion cracking and fatigue were identified in aged BWR plants. Repair-welding is one of the practical countermeasure candidates to restore the soundness of components and structures. The project of 'Assessment of Repair welding Technologies of Irradiated Materials' has been carried out to develop the technical guideline regarding the repair-welding of reactor internals. In FY 2011, we investigated the fatigue strength of stainless steel SUS316L irradiated by YAG laser welding. Furthermore, revision of the technical guideline regarding the repair-welding of reactor internals was discussed. Diagram of tungsten inert gas (TIG) weld cracking caused by entrapped Helium was modified. Helium concentration for evaluation-free of TIG weld cracking caused by entrapped Helium was revised to 0.007appm from 0.01appm. (author)

  20. Food irradiation newsletter. V.18, no.1

    International Nuclear Information System (INIS)

    1994-04-01

    This newsletter contains a report on the 10th Annual Meeting of the International Consultative Group on Food Irradiations, summaries of the Second Research Co-ordination Meetings(RCMs) and Final RCM of the Asian Regional Co-operative Project on Food Irradiation with Emphasis on Process Control and Applications(RPFI-Pase III), the resolutions and considerations of food irradiation by the IAEA Board and summaries of the Regional Project for Research, Developing and Training on the Application of Nuclear Techniques to Food Preservation in the Near East. Reviews and order information for new publications and a listing of future meetings and workshops are located in the back of this newsletter

  1. Dosimetry of a gamma beam - 650 60Co irradiator. 3. Mapping of the isodose curves in the internal cavity

    International Nuclear Information System (INIS)

    Escobedo, J.F.; Nascimento Filho, V.F. do; Ferraz, E.S.B.

    1981-01-01

    The Gammabeam-650 60 Co irradiator, containing 29,080 curies (April 1 sup(st), 1974), made by Atomic Energy of Canada Limited and in operation at CENA - Piracicaba, Sao Paulo, Brazil, basically has a block of lead for storage and shielding of the radioactive capsules and 12 vertical pneumatic tubes to maintain them in exposure position. These tubes form a cylindrical internal cavity with varying diameter between 10 and 84 cm. The isodose curves were determined for the geometries of 3, 6 and 12 actives tubes and 42 and 84 cm of diameter using the Fricke's chemical dosimeter. (Author) [pt

  2. The status of food irradiation technology

    International Nuclear Information System (INIS)

    Sivinski, J.S.

    1989-01-01

    Irradiation is a mature technology for many uses, such as medical product sterilization, crosslinking of plastics, application of coatings, stabilization of natural and synthetic rubbers prior to vulcanization, and in plant genetics. It also has many potential applications in the food and agriculture industries, especially in the postharvest activities associated with processing, storing, and distribution and in utilization and consumption. The safety of food irradiation has been thoroughly studied and established by distinguished scientists of international stature and unimpeachable credentials. Approximately 30 countries permit food irradiation and it is commercially used in 21. Parasites are of serious concern since their impact on human health and economic productivity is significant, especially in developing countries with sanitation and food control problems. Parasites in meat and fish can be rendered sterile or inactivated with irradiation, and the potential for improved human health is significant. The second area for immediate use of irradiation is in meeting plant quarantine requirements. The benefits described above and the approval of the scientific community are moving the technology toward greater utilization

  3. Distinct roles for the IIId2 sub-domain in pestivirus and picornavirus internal ribosome entry sites

    DEFF Research Database (Denmark)

    Willcocks, Margaret M.; Zaini, Salmah; Chamond, Nathalie

    2017-01-01

    Viral internal ribosomes entry site (IRES) elements coordinate the recruitment of the host translation machinery to direct the initiation of viral protein synthesis. Within hepatitis C virus (HCV)-like IRES elements, the sub-domain IIId(1) is crucial for recruiting the 40S ribosomal subunit...

  4. 75 FR 26794 - International Paper Company Franklin Pulp & Paper Mill Including On-Site Leased Workers From...

    Science.gov (United States)

    2010-05-12

    ... Company Franklin Pulp & Paper Mill Including On-Site Leased Workers From Railserve, Franklin, VA; Amended... workers of International Paper Company, Franklin Pulp & Paper Mill, Franklin, Virginia. The notice was... Pulp & Paper Mill. The Department has determined that these workers were sufficiently under the control...

  5. Irradiation of fruit and vegetables for phytosanitary purpose: an overview

    International Nuclear Information System (INIS)

    Hénon, Yves

    2014-01-01

    For several years now, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture has been actively supporting the development of irradiation as a phytosanitary measure for fresh fruit and vegetables. Besides being environmentally beneficial by replacing some harmful chemical fumigants, it also has the potential to facilitate international trade. The Joint FAO/IAEA Division has participated in the development of six adopted International Standard Phytosanitary Measures (ISPMs) and provided technical expertise to the International Plant Protection Commission (IPPC) Technical Panel on Phytosanitary Treatments (TPPT) to facilitate the successful adoption of 14 irradiation phytosanitary treatments for pests of quarantine importance as part of ISPM 28 (2007), Phytosanitary Treatments for Regulated Pests

  6. Food Irradiation Technology in the Philippines

    International Nuclear Information System (INIS)

    De Guzman, Zenaida M.

    2015-01-01

    The applications of ionizing radiation for the preservation of food and agricultural products by delaying ripening, destruction of insect pests and pathogenic microorganisms have shown great promise in the country. For more than 30 years, the Philippine Nuclear Research Institute (PNRI) in collaboration with other government and private sectors, has undertaken research and development studies and pilot and semi-commercial scale irradiation of foods. Some of the foods found to be benefit from the use of irradiation technology are mangoes and papayas for disinfestations and delay ripening; onions and garlic for inhibition of sprouting; spices and dehydrated products for reduction of microbial growth and rice and corn for insect and shelf-life extension. Two regulations approved by the Department of Health and the Bureau of Plant Industry are in place creating an enabling environment for food safety and trade of irradiated food. The conduct of awareness program in various parts of the country provided knowledge and information about the food irradiation technology. The Institute has been part of the international projects (IAEA and USDA) on the use of irradiation for sanity and phytosanitary treatment of food. The projects not only established the potential benefits of food irradiation for socio-economic development of the country but also built considerable capacity to properly treat foods. Some of the recent developments in the area of food irradiation include publication of Philippine National Standard (PNS) on Food Irradiation: Code of Good Irradiation Practices which will serve as a guide for stakeholders to irradiate food, a newly-established Electron Beam Facility to demonstrate the potential use of EB and a feasibility study of putting-up a commercial irradiation facility in the country. (author)

  7. Food irradiation technology

    International Nuclear Information System (INIS)

    Cetinkaya, N.

    1999-01-01

    Trade in food and agricultural products is important to all countries, the economies of many developing countries would be significantly improved if they were able to export more food and agricultural products. Unfortunately, many products can not be traded because they are infested with, or hosts to, harmful pests, contaminated with microorganisms, or spoil quickly. Foods contaminated with microorganisms cause economic losses, widespread illness and death. Several technologies and products have been developed to resolve problems in trading food and to improve food safety, but none can provide all the solutions. Irradiation is an effective technology to resolve technical problems in trade of many food and agricultural products, either as a stand- alone technology or in combination with others. As a disinfestation treatment it allows different levels of quarantine security to be targeted and it is one of few methods to control internal pests. The ability of irradiation virtually to eliminate key pathogenic organisms from meat, poultry, and spices is an important public health advantage. In addition to controlling pests and eliminating harmful bacteria, irradiation also extends the storage life of many foods. In the laboratories of Turkish Atomic Energy Authority, many research projects were completed on the effects of gamma irradiation to the storage life of chicken meat, anchovy, Turkish fermented sausage, dried and fresh fruits and vegetables and also research projects were conducted on the effects of gamma irradiation on microorganisms (Salmonella, Campylo-bacteria, E.coli and S.aureus in white and red meat) and parasites (food-borne, trichostrongylus spp. and Nematodes spp.)

  8. Harmonization of regulations on food irradiation in the Americas

    International Nuclear Information System (INIS)

    1992-03-01

    The International Consultative Group on Food Irradiation sponsored this meeting, which was intended to serve as a forum for senior officials involved in the regulatory control on food trade to exchange views on a possible harmonization of national regulations pertaining to the trade in irradiated foods. The main topics considered were: the status of food trade in the Americas; the implications of consumer acceptance on trade; the use of irradiation as a quarantine treatment for fruits and vegetables; and control of the process of food irradiation. This publication contains a summary of the meeting and texts of fourteen papers presented: these have been indexed separately. Refs, figs and tabs

  9. Thermal behavior of spatial structures under solar irradiation

    International Nuclear Information System (INIS)

    Liu, Hongbo; Liao, Xiangwei; Chen, Zhihua; Zhang, Qian

    2015-01-01

    The temperature, particularly the non-uniform temperature under solar irradiation, is the main load for large-span steel structures. Due the shortage of in-site temperature test in previous studies, an in-site test was conducted on the large-span steel structures under solar irradiation, which was covered by glass roof and light roof, to gain insight into the temperature distribution of steel members under glass roof or light roof. A numerical method also was presented and verified to forecast the temperature of steel member under glass roof or light roof. Based on the on-site measurement and numerical analyses conducted, the following conclusions were obtained: 1) a remarkable temperature difference exists between the steel member under glass roof and that under light roof, 2) solar irradiation has a significant effect on the temperature distribution and thermal behavior of large-span spatial structures, 3) negative thermal load is the controlling factor for member stress, and the positive thermal load is the controlling factor for nodal displacement. - Highlights: • Temperature was measured for a steel structures under glass roof and light roof. • Temperature simulation method was presented and verified. • The thermal behavior of steel structures under glass or light roof was presented

  10. Outcome and patterns of failure following limited-volume irradiation for malignant astrocytomas

    Energy Technology Data Exchange (ETDEWEB)

    Garden, A.S.; Maor, M.H.; Yung, W.K.A.; Bruner, J.M.; Woo, Shiao Y.; Moser, R.P.; Lee, Ya-Yen (Anderson (M.D.) Hospital and Tumor Inst., Houston, TX (USA))

    1991-02-01

    Between January 1982 and June 1986, 60 consecutive patients with high-grade astrocytomas (39 glioblastoma multiforme (GBM), 21 anaplastic astrocytoma (AA)) were treated with radiation therapy after biopsy (13 patients) or resection (47 patients). 53 patients were treated with limited-volume irradiation, 7 received whole-brain irradiation. The mean tumor dose was 65.4 Gy. In 35 patients, chemotherapy was given as part of their initial treatment. The 1- and 2-year survivals for GBM patients were 40 and 14 percent, respectively. Survival figures for AA patients were 76 and 52 percent at 1 and 2 years, respectively. The progression-free rate at 1 year was 13 percent in GBM and 29 percent in AA patients. 34 of 48 patients who received limited-volume irradiation had evidence of progression on postirradiation CT scans. 6 patients (3 GBM, 3 AA) had evidence of a new intracranial metastatic site on CT scan. In 3 patients the metastasis was within the previously irradiated volume, and in 3 other patients, it was outside this volume. All 6 had evidence of progression of their primary tumor at the original location on CT scan prior to the discovery of the metastatic site. 21 patients (15 GBM, 6 AA) had at least 1 postirradiation reoperation for a recurrent mass. 19 patients had recurrent tumors in the primary site, and 2 patients had necrosis but no tumor. Patients who received limited-volume irradiation for high-grade astrocytomas achieved the same survival results as patients treated previously with whole brain irradiation. New intra-cranial metastases did not influence the outcome, since these were always antedated by tumor progression at the primary site. (author). 16 refs.; 8 figs.; 2 tabs.

  11. Irradiated foodstuff: atom, junk-food and globalization; Aliments irradies: Atome, malbouffe et mondialisation

    Energy Technology Data Exchange (ETDEWEB)

    Azam, Genevieve; Berlan, Jean-Pierre; Desbordes, Roland; Dufour, Francois; Fievet, Yann; Folliard, Thierry; Gallais, Veronique; Hauter, Wenonah; Jacquiau, Christian; Kastler, Guy; Lannoye, Paul; Le Goff, Lylian; Le Rohellec, Catherine; Louchard, Olivier; Marechal, Gilles; Nicolas, Yveline; Remesy, Christian; Trouve, Aurelie; Veillerette, Francois

    2008-07-01

    Food irradiation is officially presented as an ideal technology at the service of worldwide health safety and as an alternative to chemical processing of foodstuff. It is first of all a multi-usage technology for the preservation, disinfestation, ripening slowing down, and germination inhibition of products which serves the interests of multinational companies of the agriculture and food industry. According to the authors, it is also an instrument for the globalization of foodstuff trade encouraged by the international institutions and by some governments. The book stresses on the health, socio-economic and environmental risks of this technology: vitamins loss, carcinogenesis, mutagenesis, impact on local employment and economy, risks linked with the use of irradiation devices etc

  12. Crystal plasticity modeling of irradiation growth in Zircaloy-2

    Science.gov (United States)

    Patra, Anirban; Tomé, Carlos N.; Golubov, Stanislav I.

    2017-08-01

    A physically based reaction-diffusion model is implemented in the visco-plastic self-consistent (VPSC) crystal plasticity framework to simulate irradiation growth in hcp Zr and its alloys. The reaction-diffusion model accounts for the defects produced by the cascade of displaced atoms, their diffusion to lattice sinks and the contribution to crystallographic strain at the level of single crystals. The VPSC framework accounts for intergranular interactions and irradiation creep, and calculates the strain in the polycrystalline ensemble. A novel scheme is proposed to model the simultaneous evolution of both, number density and radius, of irradiation-induced dislocation loops directly from experimental data of dislocation density evolution during irradiation. This framework is used to predict the irradiation growth behaviour of cold-worked Zircaloy-2 and trends compared to available experimental data. The role of internal stresses in inducing irradiation creep is discussed. Effects of grain size, texture and external stress on the coupled irradiation growth and creep behaviour are also studied and compared with available experimental data.

  13. Storage properties of irradiated potatoes and onions. Part of a coordinated programme on the Asian Regional Cooperative Project on Food Irradiation

    International Nuclear Information System (INIS)

    Hayashi, T.

    1984-12-01

    Quality changes with regard to browning of inner buds and sprouting of irradiated onions variety Kitamiki and Ohotsuku were investigated. One ton of each variety was irradiated with either 38.1 or 65.2 Gy at the Commercial Potato Irradiator in Shihoro and stored either at 0 deg. C or 5 deg. C. After 6 months of storage, they were taken out to be stored at room temperature. It was observed that green inner buds developed in most unirradiated onions which showed no external sprouting irrespective of storage temperature. Irradiated onions show no external or internal sprouting but exhibited browning of small inner buds. Unirradiated onions rooted slightly during storage at low temperature. None of the irradiated samples showed rooting. Neither of the samples spoiled significantly during storage. It was concluded that storage at room temperature accelerated sprouting and development of green inner buds of unirradiated onions and browning of small inner buds in irradiated ones. During off-seasons, only irradiated onions stored at low temperatures have qualities of commercial significance

  14. Thyroid gland irradiations and thyroid cancers; Critical bibliographic journal; Irradiations de la thyroide et cancers thyroidiens. Revue bibliographique critique

    Energy Technology Data Exchange (ETDEWEB)

    Vitauxa, F. [CHI Le Raincy-Montfermeil, Faculte X. Bichat, Lab. de Biophysique, Service de Medecine Nucleaire, 93 - Le Raincy-Montfermeil (France)

    2007-07-15

    The large increase in the incidence of thyroid cancer among children who were mainly less than five years old at the time of the Chernobyl accident is still a major concern for endocrinologists and nuclear medicine physicians. Epidemiological studies have focused solely on iodine-131. However, past knowledge on thyroid irradiation (medical use of iodine-131, radioactive fallout on Marshall islands and the Nevada and Hanford site releases) as well as number of recent works (about low-dose irradiation) raise question on the role of other factors. It is here shown that post-Chernobyl thyroid irradiation is complex and that all factors (iodine-131, but also short lived isotopes of iodine and external irradiation) should be considered. Finally, one needs to think about some of the present medical uses of iodine-131 and especially to the treatment of hyperthyroidism in young subjects. (author)

  15. An international overview on the development of radurization

    International Nuclear Information System (INIS)

    Farkas, Jozsef

    1983-01-01

    A brief summary on the characteristics, applicability and limiting factors of food preservation by irradiation is given. Economic, energy and hygienic aspects of the process are outlined and the legal procedures for food irradiation process and plant licensing are treated including international aspects. Finally, the international cooperation programs and projects in the hygienic investigations, technical execution and education issues and the main trends of future development are outlined. (author)

  16. Site-specific analysis for location of a sludge irradiation plant at Provo, Utah

    International Nuclear Information System (INIS)

    Bingham, M.L.; Luce, W.A.; Ahlstrom, S.B.; Johnson, B.A.

    1980-01-01

    Provo's current sludge handling program consists of anaerobic digestion, sand drying beds, and stockpiling onsite until the sludge can be removed for application to the land. This practice is adequate to meet current State of Utah regulations. However, EPA-proposed regulations will require Provo to either upgrade its current sludge disposal practices to provide more adequate pathogen destruction prior to land application, or change its method of final sludge disposal. Four possible alternatives to the existing practice were evaluated. These include (1) applying liquid sludge from the digesters to agricultural land, (2) landfilling, (3) irradiation, and (4) composting of dry sludge. Land application of liquid sludge and landfilling were found to be the most costly alternatives, primarily because of high transportation costs. Composting and irradiation were found to be the least costly alternatives. Irradiation had a higher initial capital cost, but a lower annual operation and maintenance cost than composting. Overall, composting appeared to be the most cost-effective alternative; however, pilot testing would be necessary to verify the unusual criteria for composting at Provo

  17. TU-G-BRD-06: The Imaging and Radiation Oncology Core Houston (IROC Houston) QA Center International Activities Outside North America

    Energy Technology Data Exchange (ETDEWEB)

    Followill, D; Kry, S; Molineu, A; Lowenstein, J; Alvarez, P; Taylor, P; Nguyen, H; Hernandez, N; Lujano, C; Nguyen, T; Keith, T; Roll, J; Tailor, A [UT MD Anderson Cancer Center, Houston, TX (United States)

    2015-06-15

    Purpose: To describe the extent of IROC Houston’s (formerly the RPC) QA activities and audit results for radiotherapy institutions outside of North America (NA). Methods: The IROC Houston’s QA program components were designed to audit the radiation dose calculation chain from the NIST traceable reference beam calibration, to inclusion of dosimetry parameters used to calculate tumor doses, to the delivery of the radiation dose. The QA program provided to international institutions includes: 1) remote TLD/OSLD audit of machine output, 2) credentialing for advanced technologies, and 3) review of patient treatment records. IROC Houston uses the same standards and acceptance criteria for all of its audits whether for North American or international sites. Results: IROC Houston’s QA program has reached out to radiotherapy sites in 43 different countries since 2013 through their participation in clinical trials. In the past two years, 2,778 international megavoltage beam outputs were audited with OSLD/TLD. While the average IROC/Inst ratio is near unity for all sites monitored, there are international regions whose results are significantly different from the NA region. In the past 2 years, 477 and 87 IMRT H&N phantoms were irradiated at NA and international sites, respectively. Regardless of the OSLD beam audit results, the overall pass rate (87 percent) for all international sites (no region separation) is equal to the NA sites. Of the 182 international patient charts reviewed, 10.7 percent of the dose calculation points did not meet our acceptance criterion as compared to 13.6 percent for NA sites. The lower pass rate for NA sites results from a much larger brachytherapy component which has been shown to be more error prone. Conclusion: IROC Houston has expanded its QA services worldwide and continues a long history of improving radiotherapy dose delivery in many countries. Funding received for QA audit services from the Korean GOG, DAHANCA, EORTC, ICON and CMIC

  18. TU-G-BRD-06: The Imaging and Radiation Oncology Core Houston (IROC Houston) QA Center International Activities Outside North America

    International Nuclear Information System (INIS)

    Followill, D; Kry, S; Molineu, A; Lowenstein, J; Alvarez, P; Taylor, P; Nguyen, H; Hernandez, N; Lujano, C; Nguyen, T; Keith, T; Roll, J; Tailor, A

    2015-01-01

    Purpose: To describe the extent of IROC Houston’s (formerly the RPC) QA activities and audit results for radiotherapy institutions outside of North America (NA). Methods: The IROC Houston’s QA program components were designed to audit the radiation dose calculation chain from the NIST traceable reference beam calibration, to inclusion of dosimetry parameters used to calculate tumor doses, to the delivery of the radiation dose. The QA program provided to international institutions includes: 1) remote TLD/OSLD audit of machine output, 2) credentialing for advanced technologies, and 3) review of patient treatment records. IROC Houston uses the same standards and acceptance criteria for all of its audits whether for North American or international sites. Results: IROC Houston’s QA program has reached out to radiotherapy sites in 43 different countries since 2013 through their participation in clinical trials. In the past two years, 2,778 international megavoltage beam outputs were audited with OSLD/TLD. While the average IROC/Inst ratio is near unity for all sites monitored, there are international regions whose results are significantly different from the NA region. In the past 2 years, 477 and 87 IMRT H&N phantoms were irradiated at NA and international sites, respectively. Regardless of the OSLD beam audit results, the overall pass rate (87 percent) for all international sites (no region separation) is equal to the NA sites. Of the 182 international patient charts reviewed, 10.7 percent of the dose calculation points did not meet our acceptance criterion as compared to 13.6 percent for NA sites. The lower pass rate for NA sites results from a much larger brachytherapy component which has been shown to be more error prone. Conclusion: IROC Houston has expanded its QA services worldwide and continues a long history of improving radiotherapy dose delivery in many countries. Funding received for QA audit services from the Korean GOG, DAHANCA, EORTC, ICON and CMIC

  19. Internationally Standardized Reporting (Checklist) on the Sustainable Development Performance of Uranium Mining and Processing Sites

    International Nuclear Information System (INIS)

    Harris, Frank

    2014-01-01

    The Internationally Standardized Reporting Checklist on the Sustainable Development Performance of Uranium Mining and Processing Sites: • A mutual and beneficial work between a core group of uranium miners and nuclear utilities; • An approach based on an long term experience, international policies and sustainable development principles; • A process to optimize the reporting mechanism, tools and efforts; • 11 sections focused on the main sustainable development subject matters known at an operational and headquarter level. The WNA will make available the sustainable development checklist for member utilities and uranium suppliers. Utilities and suppliers are encouraged to use the checklist for sustainable development verification.

  20. On the influence of high energy (250MeV) electron irradiation on the structure and properties of aluminium

    International Nuclear Information System (INIS)

    Gindin, I.A.; Neklyudov, I.M.; Okovit, V.S.; Starolat, M.P.; Dyatlov, V.P.

    1974-01-01

    The results of studies on the amplitude dependence of internal friction and structural changes in technically pure aluminium in the initial state and after irradiation with high-energy electrons are presented. Three stages are observed in the internal friction curves from the amplitude of the waves. If the values of the internal friction remain the same, irradiation considerably widens the amplitude-independent region and shifts the second and third regions toward the high-amplitude direction at first. Starting with the Granate-Luke model, changes in the length of the free dislocation segments in irradiated aluminium were determined. Electron microscope studies showed the presence of numerous radiation defects and changes in the configuration with dislocation lines in irradiated aluminum

  1. Effect of gamma irradiation sterilization on the osteoinductive capacity of demineralized bone powder

    International Nuclear Information System (INIS)

    Babak Arjmand; Hamid Reza Aghayan; Mehdi Golestani; Farid Azmoudeh Ardalan

    2008-01-01

    Full text: Gamma irradiation is a well known method for secondary sterilization of bone allograft before clinical use to reduce the risk of infections and complications. The current study evaluated the effect of gamma irradiation on the osteoinductive capability of human demineralized bone powder using a rat model. Twenty rats received two separate implants consisting of 30 mg aseptically-harvested and 30 mg gamma irradiated demineralized bone powder. The implants from each group were placed into two separate muscle pouch in the paravertebral muscles of each rat. All 20 rats were euthanized after 4 weeks and each implantation site was removed with 0.5 cm normal tissue around the implant. Histological examination was done to determine the presence or absence of new bone, cartilage and bone marrow element. All except one of 20 aseptically-harvested demineralized bone powder sites histologically contained new bone elements (95%) and six (30%) of 20 gamma irradiated demineralized bone powder sites showed evidence of new bone elements. There was significant difference between two groups (p<0.05). The results of this study indicate that gamma irradiation reduces osteoinductive properties of demineralized bone powder. But because of its availability and low cost it is widely used for secondary sterilization of bone allografts. (Author)

  2. Economic study of rice irradiation in egypt

    International Nuclear Information System (INIS)

    Elkhateeb, M.A.; Elgmeel, E.A.

    2004-01-01

    The paper discusses the economics of rice irradiation and the effect of various parameters on unit processing costs. It provides a model for calculating specific unit processing costs by correlating known capital costs with annual operation cost and annual throughputs. It is intended to provide the investors with a general knowledge of how unit processing costs are derived. The investment criteria utilized for commercial evaluation were internal rate of return (I.I.R), pay back period (P.B.P), and average rate of return (A.R.R). The irradiation cost and the additional income are also discussed. The result of the analysis showed that the installation of an irradiation unit in Egypt would be economically feasible

  3. Likelihood of Bone Recurrence in Prior Sites of Metastasis in Patients With High-Risk Neuroblastoma

    Energy Technology Data Exchange (ETDEWEB)

    Polishchuk, Alexei L. [Department of Radiation Oncology, University of California at San Francisco School of Medicine and UCSF Benioff Children' s Hospital, San Francisco, California (United States); Li, Richard [Division of Radiation Oncology, Dana Farber/Boston Children' s Cancer and Blood Disorders Center, Brigham and Women' s Hospital, Harvard Medical School, Boston, Massachusetts (United States); Hill-Kayser, Christine [Department of Radiation Oncology, University of Pennsylvania School of Medicine, Philadelphia, Pennsylvania (United States); Little, Anthony [Division of Oncology, Children' s Hospital of Philadelphia, Philadelphia, Pennsylvania (United States); Hawkins, Randall A. [Department of Radiology, University of California at San Francisco School of Medicine and UCSF Benioff Children' s Hospital, San Francisco, California (United States); Hamilton, Jeffrey; Lau, Michael [Department of Radiation Oncology, University of California at San Francisco School of Medicine and UCSF Benioff Children' s Hospital, San Francisco, California (United States); Tran, Hung Chi [Division of Hematology/Oncology, Children' s Hospital of Los Angeles, Los Angeles, California (United States); Strahlendorf, Caron [Division of Hematology and Oncology, Department of Pediatrics, The University of British Columbia, Vancouver, British Columbia (Canada); Lemons, Richard S. [Division of Pediatric Hematology/Oncology, University of Utah School of Medicine, Salt Lake City, Utah (United States); Weinberg, Vivian [Department of Radiation Oncology, University of California at San Francisco School of Medicine and UCSF Benioff Children' s Hospital, San Francisco, California (United States); Matthay, Katherine K.; DuBois, Steven G. [Department of Pediatrics, University of California at San Francisco School of Medicine and UCSF Benioff Children' s Hospital, San Francisco, California (United States); and others

    2014-07-15

    Purpose/Objectives: Despite recent improvements in outcomes, 40% of children with high-risk neuroblastoma will experience relapse, facing a guarded prognosis for long-term cure. Whether recurrences are at new sites or sites of original disease may guide decision making during initial therapy. Methods and Materials: Eligible patients were retrospectively identified from institutional databases at first metastatic relapse of high-risk neuroblastoma. Included patients had disease involving metaiodobenzylguanidine (MIBG)-avid metastatic sites at diagnosis and first relapse, achieved a complete or partial response with no more than one residual MIBG-avid site before first relapse, and received no total body irradiation or therapy with {sup 131}I-MIBG before first relapse. Anatomically defined metastatic sites were tracked from diagnosis through first relapse to determine tendency of disease to recur at previously involved versus uninvolved sites and to assess whether this pattern was influenced by site irradiation. Results: Of 159 MIBG-avid metastatic sites identified among 43 patients at first relapse, 131 (82.4%) overlapped anatomically with the set of 525 sites present at diagnosis. This distribution was similar for bone sites, but patterns of relapse were more varied for the smaller subset of soft tissue metastases. Among all metastatic sites at diagnosis in our subsequently relapsed patient cohort, only 3 of 19 irradiated sites (15.8%) recurred as compared with 128 of 506 (25.3%) unirradiated sites. Conclusions: Metastatic bone relapse in neuroblastoma usually occurs at anatomic sites of previous disease. Metastatic sites identified at diagnosis that did not receive radiation during frontline therapy appeared to have a higher risk of involvement at first relapse relative to previously irradiated metastatic sites. These observations support the current paradigm of irradiating metastases that persist after induction chemotherapy in high-risk patients. Furthermore

  4. ENHANCING FOOD SAFETY AND STABILITY THROUGH IRRADIATION: A REVIEW

    Directory of Open Access Journals (Sweden)

    Manzoor Ahmad Shah

    2014-04-01

    Full Text Available Food irradiation is one of the non thermal food processing methods. It is the process of exposing food materials to the controlled amounts of ionizing radiations such as gamma rays, X-rays and accelerated electrons, to improve microbiological safety and stability. Irradiation disrupts the biological processes that lead to decay of food quality. It is an effective tool to reduce food-borne pathogens, spoilage microorganisms and parasites; to extend shelf-life and for insect disinfection. The safety and consumption of irradiated foods have been extensively studied at national levels and in international cooperations and have concluded that foods irradiated under appropriate technologies are both safe and nutritionally adequate. Specific applications of food irradiation have been approved by national legislations of more than 55 countries worldwide. This review aims to discuss the applications of irradiation in food processing with the emphasis on food safety and stability.

  5. Age dependent effects of combined irradiation on lipid peroxidation in rat blood

    International Nuclear Information System (INIS)

    Mazhul', L.M.; Volykhina, V.E.; Gatsko, G.G.

    2000-01-01

    It was studied the effects of combined action of external acute gamma-irradiation in dose 1.0 Gy and chronic internal irradiation of cesium 137 (0.8 MBq/kg) on lipid peroxidation system in rat blood. Animals of two aged groups (2 and 6 months old) was investigated. The experiments were conducted on 10, 30, 90 and 180 days after the cessation of cesium 137 injection. Internal irradiation didn't exert influence on lipid peroxidation system in blood. Antioxidant system was activated on 10 days after acute irradiation at 2-months old animals and by 180 days at 6-months ones. In the case of combined irradiation activation of the antioxidant system in blood serum of 2-months old rats in early terms (10 days) possibly supports the invariable level of lipid peroxidation products. At 6-months old rats, on the contrary, the activation of the antioxidant system was not registered, however the content of malonic dialdehyde was increased. Possibly, at 2-months old rats the combined irradiation in early terms stimulates the protective systems of the organism in higher degree than at 6-months old ones

  6. Changes in the surface electronic states of semiconductor fine particles induced by high energy ion irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Yamaki, Tetsuya; Asai, Keisuke; Ishigure, Kenkichi [Tokyo Univ. (Japan); Shibata, Hiromi

    1997-03-01

    The changes in the surface electronic states of Q-sized semiconductor particles in Langmuir-Blodgett (LB) films, induced by high energy ion irradiation, were examined by observation of ion induced emission and photoluminescence (PL). Various emission bands attributed to different defect sites in the band gap were observed at the initial irradiation stage. As the dose increased, the emissions via the trapping sites decreased in intensity while the band-edge emission developed. This suggests that the ion irradiation would remove almost all the trapping sites in the band gap. The low energy emissions, which show a multiexponential decay, were due to a donor-acceptor recombination between the deeply trapped carriers. It was found that the processes of formation, reaction, and stabilization of the trapping sites would predominantly occur under the photooxidizing conditions. (author)

  7. Assessment of the current internal dose due to 137Cs and 90Sr for people living within the Semipalatinsk Test Site, Kazakhstan.

    Science.gov (United States)

    Semiochkina, N; Voigt, G; Mukusheva, M; Bruk, G; Travnikova, I; Strand, P

    2004-02-01

    The Semipalatinsk Test Site in Kazakhstan was one of the major sites used by the USSR for testing nuclear weapons for more than 40 y. Since the early 1990's, responsibility for the site has passed to the Kazakh authorities. There has been a gradual re-establishment of agricultural use such as horse and sheep farming. Therefore, it has become important to evaluate the current and future risk to people living on and using the contaminated area. Internal dose assessment is one of the main components of the total dose when deriving risk factors for population living within the test site. Internal doses based on food monitoring and whole body measurements were calculated for adults and are in the range of 13-500 microSv y(-1) due to radiocesium and radiostrontium.

  8. Error Assessment of Solar Irradiance Forecasts and AC Power from Energy Conversion Model in Grid-Connected Photovoltaic Systems

    Directory of Open Access Journals (Sweden)

    Gianfranco Chicco

    2015-12-01

    Full Text Available Availability of effective estimation of the power profiles of photovoltaic systems is essential for studying how to increase the share of intermittent renewable sources in the electricity mix of many countries. For this purpose, weather forecasts, together with historical data of the meteorological quantities, provide fundamental information. The weak point of the forecasts depends on variable sky conditions, when the clouds successively cover and uncover the solar disc. This causes remarkable positive and negative variations in the irradiance pattern measured at the photovoltaic (PV site location. This paper starts from 1 to 3 days-ahead solar irradiance forecasts available during one year, with a few points for each day. These forecasts are interpolated to obtain more irradiance estimations per day. The estimated irradiance data are used to classify the sky conditions into clear, variable or cloudy. The results are compared with the outcomes of the same classification carried out with the irradiance measured in meteorological stations at two real PV sites. The occurrence of irradiance spikes in “broken cloud” conditions is identified and discussed. From the measured irradiance, the Alternating Current (AC power injected into the grid at two PV sites is estimated by using a PV energy conversion model. The AC power errors resulting from the PV model with respect to on-site AC power measurements are shown and discussed.

  9. Review on applied foods and analyzed methods in identification testing of irradiated foods

    International Nuclear Information System (INIS)

    Kim, Kwang Hoon; Lee, Hoo Chul; Park, Sung Hyun; Kim, Soo Jin; Kim, Kwan Soo; Jeong, Il Yun; Lee, Ju Woon; Yook, Hong Sun

    2010-01-01

    Identification methods of irradiated foods have been adopted as official test by EU and Codex. PSL, TL, ESR and GC/MS methods were registered in Korea food code on 2009 and put in force as control system of verification for labelling of food irradiation. But most generally applicable PSL and TL methods are specified applicable foods according to domestic approved items. Unlike these specifications, foods unpermitted in Korea are included in applicable items of ESR and GC/MS methods. According to recent research data, numerous food groups are possible to effective legal control by identification and these items are demanded to permit regulations for irradiation additionally. Especially, the prohibition of irradiation for meats or seafoods is not harmonized with international standards and interacts as trade friction or industrial restrictions due to unprepared domestic regulation. Hence, extension of domestic legal permission for food irradiation can contrive to related industrial development and also can reduce trade friction and enhance international competitiveness

  10. SITE PROGRAM DEMONSTRATION ECO LOGIC INTERNATIONAL GAS-PHASE CHEMICAL REDUCTION PROCESS, BAY CITY, MICHIGAN TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The SITE Program funded a field demonstration to evaluate the Eco Logic Gas-Phase Chemical Reduction Process developed by ELI Eco Logic International Inc. (ELI), Ontario, Canada. The Demonstration took place at the Middleground Landfill in Bay City, Michigan using landfill wa...

  11. A forecast of the thyroid pathology at the children irradiated prenatally

    International Nuclear Information System (INIS)

    Akulich, N.S.

    1995-01-01

    It is investigated a state of the hypophysis thyroid system at 44 pregnant women in age 19-36 years, which were irradiated by low dozes during the Chernobyl NPP accident and evacuated from the contaminated zone in first 10 days. The average doze of internal irradiation of the thyroid for pregnant women is equal 4,374 +- 1,364 mGy and for irradiated prenatally children -5,283 +- 1,454 mGy. The researches of free thyroxine, triiodothyronine and thyroxine binding globulin were done by the radiation immunological method in a venous blood serum, and a thyrotropic hormone - by a set of the 'CIS Bio International' firm. The diagnosis of the thyroid pathology was confirmed by a ultrasonic research and determination of contents of thyroid hormones. The account of the internal irradiation dozes for a thyroid was conducted by means of a use of a single exponential model of a removing of iodine 131. The fetus' thyroid irradiation doze owing to a entering of radioisotopes to the mother's body was estimated by means of the dose rate on the basis of the Johnson three component model. Direct correlation between the thyroid function at pregnant women, which were irradiation by low doses, and frequency of occurrence of an endemic goiter at the children irradiated prenatally is established. At the contents of the free thyroxine 128,9 +- 4,8 nmol/l or more, triiodothyronine 1,9 +- 0,2 nmol/l or less and increase of an activity of thyrotropic hormone from 1,3 +- 0,1 μU/ml in 12 - 27 weeks of pregnancy up to 1,9 +- 0,2 μU/ml in 38-40 weeks it is possible to predict an occurrence of the thyroid pathology at the future child. Is offered to use from the 12-weak term of pregnancy a radiation immunological method of research of thyrotropic and thyroid hormones of pregnant women, subjected to radiation effect, for preventive maintenance and revealing of early disorders of a thyroid at the children irradiated prenatally. 10 refs., 1 tab

  12. Identification and dose determination using ESR measurements in the flesh of irradiated vegetable products

    International Nuclear Information System (INIS)

    Jesus, E.F.O. de; Rossi, A.M.; Lopes, R.T.

    2000-01-01

    The international commerce of vegetable products is often dependent on the quarantine protections that are imposed by the importing countries because of the fear of contamination by fruit flies. The use of ionizing radiation as a treatment for these products can be used to remove this problem and a real proof of irradiation can contribute to the implementation of the international commerce. ESR measurement on the pulp of vegetable products can be used as a proof of irradiation using the species introduced in cellulose that are found uniquely in irradiated products. The stability of these species are compatible with the life of the products analyzed. The pulp signal intensity is sufficient to identify products irradiated with doses as low as 100 Gy for some fruits

  13. DOE/EPA sludge irradiation technology transfer program

    International Nuclear Information System (INIS)

    Ahlstrom, S.B.

    1980-01-01

    The cesium-137 sludge irradiation program has successfully progressed through the phases of technology development and pilot plant evaluation and has entered the technology transfer phase. Initial technology transfer activities have identified a growing interest among wastewater engineers and public officials to learn more about the application of irradiation in sludge treatment. As a result, a formal technology transfer program has been developed. As a major activity of this program, it is planned that the US Department of Energy, working with the US Environmental Protection Agency, state and local governments, will support the placement of five to 10 sludge irradiators at selected wastewater treatment facilities throughout the United States. Facilities which may best benefit from this process technology are being identified. Technology transfer will be stimulated as engineers and wastewater officials become familiar with the evaluation and implementation of sludge irradiation at these sites

  14. Food Irradiation Newsletter. V. 10, no. 2

    International Nuclear Information System (INIS)

    1986-11-01

    This issue reports the summary of the Task Force Meeting on the Use of Irradiation to Ensure Hygienic Quality of Food, convened by the International Consultative Group on Food Irradiation (ICGFI) in Vienna, July 1986. The full report of the final FAO/IAEA Research Co-ordination Meeting on Factors Influencing the Utilization of Food Irradiation, convened in Dubrovnik, Yugoslavia in June 1986, contains the conclusion of the work carried out under the Co-ordinated Research Programme in the past 5 years. A Regional Co-ordinated Research Programme for Latin America has been launched with a workshop convened on this subject in Piracicaba, Brazil, July 1986. Also featured is the summary report of the FAO/IAEA Seminar for Asia and the Pacific on the Practical Application of Food Irradiation convened in Shanghai, People's Republic of China, April 1986. The well-attended seminar reported on the progress and development of practical scale application of food irradiation in the region. A successful market testing of irradiated mangoes in Miami, Florida is also described. The outcome of this test is quite significant in view of the Chernobyl accident a few months before the tests. Tabs

  15. An improved technique for breast cancer irradiation including the locoregional lymph nodes

    NARCIS (Netherlands)

    Hurkmans, C. W.; Saarnak, A. E.; Pieters, B. R.; Borger, J. H.; Bruinvis, I. A.

    2000-01-01

    PURPOSE: To find an irradiation technique for locoregional irradiation of breast cancer patients which, compared with a standard technique, improves the dose distribution to the internal mammary-medial supraclavicular (IM-MS) lymph nodes. The improved technique is intended to minimize the lung dose

  16. Acute skin reactions observed in fractionated proton irradiation

    International Nuclear Information System (INIS)

    Arimoto, Takuro; Maruhashi, Noboru; Takada, Yoshihisa; Hayakawa, Yoshinori; Inada, Tetsuo; Kitagawa, Toshio

    1989-01-01

    Between May 1985 and July 1987, 49 skin reactions of 43 patients treated by proton irradiation were observed at the Particle Radiation Medical Science Center (PARMS), the University of Tsukuba. Taking the peak skin score as an endpoint, the radiobiological effects [relative biological effectiveness (RBE) and time-dose relationship] of the proton beam in multi-fractionated treatments were estimated. Factors influencing the skin dose, such as the prescribed tumor dose, tumor site, and number of applied fields, were also analyzed. The following conclusions regarding acute skin reactions to the clinical use of proton irradiation were obtained: 1) the physical skin-sparing effect of proton irradiation in single-field irradiation, especially in superficial regions, is not large compared with that of high-energy photon irradiation; 2) multidirectional proton irradiation significantly reduced the skin dose and severity of acute reasons; 3) the radiobiological effects of the proton beam, RBE and the time factor, estimated in human skin in multi-fractional treatment were slightly smaller than those of X-rays, i.e., 0.92 and -0.25±0.09, respectively. (author)

  17. Some biochemical effects of combined action of external irradiation and strontium 89

    International Nuclear Information System (INIS)

    Khadzhirusev, S.; Kiradzhiev, G.; Lalova, Kh.

    1979-01-01

    An attempt was made to assess the influence of strontium 89 on some biochemical effects, induced by external total X-irradiation of the organism in the early terms after treatment. The serum alkaline and acid phosphatase activities and the serum copper and ceruloplasmin content in rats served as indices. Inference is made that in cases, when either of the two radiation actors is alone responsible for obtaining a definite effects, their combination may integrate the biological effect, their combination may integrate the biological effects. Considerations are adduced on the dose span, within which integration of the effect may be expected. The data of this study indicate, that there is integration, when the effective dose external irradiaton effective dose internal irradiation ratio ranks from 1 : 3 to 1 : 1. No integration of effect was found in case when the effective dose of external irradiation eceeds that of internal irradiation. Data are also presented that, in conformity with the parameters studied, the minimal effective radiostrontium dose, generated in the critical organs, is approximately 3 times higher than the minimal effective dose of external irradiation. (author)

  18. Experimental approach and micro-mechanical modeling of the mechanical behavior of irradiated zirconium alloys; Approche experimentale et modelisation micromecanique du comportement des alliages de zirconium irradies

    Energy Technology Data Exchange (ETDEWEB)

    Onimus, F

    2003-12-01

    Zirconium alloys cladding tubes containing nuclear fuel of the Pressurized Water Reactors constitute the first safety barrier against the dissemination of radioactive elements. Thus, it is essential to predict the mechanical behavior of the material in-reactor conditions. This study aims, on the one hand, to identify and characterize the mechanisms of the plastic deformation of irradiated zirconium alloys and, on the other hand, to propose a micro-mechanical modeling based on these mechanisms. The experimental analysis shows that, for the irradiated material, the plastic deformation occurs by dislocation channeling. For transverse tensile test and internal pressure test this channeling occurs in the basal planes. However, for axial tensile test, the study revealed that the plastic deformation also occurs by channeling but in the prismatic and pyramidal planes. In addition, the study of the macroscopic mechanical behavior, compared to the deformation mechanisms observed by TEM, suggested that the internal stress is higher in the case of irradiated material than in the case of non-irradiated material, because of the very heterogeneous character of the plastic deformation. This analysis led to a coherent interpretation of the mechanical behavior of irradiated materials, in terms of deformation mechanisms. The mechanical behavior of irradiated materials was finally modeled by applying homogenization methods for heterogeneous materials. This model is able to reproduce adequately the mechanical behavior of the irradiated material, in agreement with the TEM observations. (author)

  19. Two models of distribution of sites sensitive to the endonuclease from Micrococcus luteus in the DNA of UV irradiated Escherichia coli B/r Hcr-

    International Nuclear Information System (INIS)

    Kleibl, K.; Sedliakova, M.

    1984-01-01

    Cells prelabelled with 14 C-thymine and irradiated with 5 J/m 2 were at various intervals after UV labelled with 3 H-thymidine then treated with the extract from M. luteus and DNA was analyzed in alkaline sucrose gradients. Loss of endonuclease sensitive sites (Es sites) from the parental DNA and their occurrence in the daughter DNA were followed for at least three replication cycles. Data obtained indicate that about 50% of Es sites were lost during the first replication cycle but no additional loss was observed during subsequent cycles. Thus our data do not support a hypothesis that a half of the dimers are transferred from the parental into the daughter strands at each replication cycle. They rather indicate that dimers remain in situ and distortions accompanying dimers are distinguished either on the side of the parental or on the side of the daughter strands with an equal probability. (author)

  20. Positron annihilation and electron spin resonance studies of defects in electron-irradiated 3C-SiC

    International Nuclear Information System (INIS)

    Itoh, Hisayoshi; Yoshikawa, Masahito; Tanigawa, Shoichiro; Nashiyama, Isamu; Misawa, Shunji; Okumura, Hajime; Yoshida, Sadafumi.

    1992-01-01

    Defects induced by 1 MeV electron-irradiation in cubic silicon carbide (3C-SiC) epitaxially grown by chemical vapor deposition have been studied with positron annihilation and electron spin resonance (ESR). Doppler broadened energy spectra of annihilation γ-rays obtained by using variable-energy positron beams showed the formation of vacancy-type defects in 3C-SiC by the electron-irradiation. An ESR spectrum labeled Tl, which has an isotropic g-value of 2.0029 ± 0.001, was observed in electron-irradiated 3C-SiC. The Tl spectrum is interpreted by hyperfine interactions of paramagnetic electrons with 13 C at four carbon sites and 29 Si at twelve silicon sites, indicating that the Tl center arises from a point defect at a silicon site. Both the results can be accounted for by the introduction of isolated Si vacancies by the irradiation. (author)

  1. Bending force constant of gamma-ray irradiated NaNO2

    International Nuclear Information System (INIS)

    Kwun, S.I.; Allavena, M.

    1976-01-01

    The origin of the new peak appearing near the ν 2 i.r. absorption band of the NO 2 - group in γ-ray irradiated NaNO 2 ferroelectric crystal is explained by using a model which assumes that some of the Na + ions are displaced from their original sites after irradiation, perturbing the vibrational motion of NO 2 - . In this framework, the bending force constant of the perturbed NO 2 - group is calculated using a modified version of the CNDO/2 method, which can take into account the environmental effects on the local crystal site considered. The values of the bending force constant of virginal and irradiated NaNO 2 obtained are 1.19 md/A and 1.27 md/A respectively. The vibrational bending mode of the perturbed NO 2 - groups seems responsible for the additional i.r. absorption band observed experimentally at 835 cm -1 . (author)

  2. Design considerations and operating experience with wet storage of Ontario Hydro's irradiated fuel

    International Nuclear Information System (INIS)

    Frost, C.R.; Naqvi, S.J.; McEachran, R.A.

    1987-01-01

    The characteristics of Ontario Hydro's fuel and at-reactor irradiated fuel storage water pools (or irradiated fuel bays) are described. There are two types of bay known respectively as primary bays and auxiliary bays, used for at-reactor irradiated fuel storage. Irradiated fuel is discharged remotely from Ontario Hydro's reactors to the primary bays for initial storage and cooling. The auxiliary bays are used to receive and store fuel after its initial cooling in the primary bay, and provide additional storage capacity as needed. The major considerations in irradiated fuel bay design, including site-specific requirements, reliability and quality assurance, are discussed. The monitoring of critical fuel bay components, such as bay liners, the development of high storage density fuel containers, and the use of several irradiated fuel bays at each reactor site have all contributed to the safe handling of the large quantities of irradiated fuel over a period of about 25 years. Routine operation of the irradiated fuel bays and some unusual bay operational events are described. For safety considerations, the irradiated fuel in storage must retain its integrity. Also, as fuel storage is an interim process, likely for 50 years or more, the irradiated fuel should be retrievable for downstream fuel management phases such as reprocessing or disposal. A long-term experimental program is being used to monitor the integrity of irradiated fuel in long-term wet storage. The well characterized fuel, some of which has been in wet storage since 1962 is periodically examined for possible deterioration. The evidence from this program indicates that there will be no significant change in irradiated fuel integrity (and retrievability) over a 50 year wet storage period

  3. Validation of the cyclobutanone protocol for detection of irradiated lipid containing foods by interlaboratory trials

    International Nuclear Information System (INIS)

    Stevenson, M.H.

    1996-01-01

    Following the positive conclusion of the Food and Agriculture Organisation (FAO)/International Atomic Energy Agency (IAEA)/World Health Organisation (WHO) Joint Expert Committee on the Wholesomeness of Irradiated Food (JECFI) in 1981 that ''the irradiation treatment of any food commodity up to an overall average dose of 10 kGy presents no toxicological hazard and introduces no special nutritional or microbiological problems'' there was renewed interest in the use of irradiation for the preservation of food. As a result of the progress made in commercialisation of the process, greater international trade in irradiated foods, differing regulations relating to the use of the technology in many countries and consumer demand for clear labelling of the treated food, the need arose for reliable and routine tests to confirm that food had been irradiated. Although not essential for management of the process, it was envisaged that the availability of such tests would encourage world-wide acceptance of food irradiation and may help in the enforcement of labelling regulations. (author)

  4. Osteogenic Matrix Cell Sheets Facilitate Osteogenesis in Irradiated Rat Bone

    Directory of Open Access Journals (Sweden)

    Yoshinobu Uchihara

    2015-01-01

    Full Text Available Reconstruction of large bone defects after resection of malignant musculoskeletal tumors is a significant challenge in orthopedic surgery. Extracorporeal autogenous irradiated bone grafting is a treatment option for bone reconstruction. However, nonunion often occurs because the osteogenic capacity is lost by irradiation. In the present study, we established an autogenous irradiated bone graft model in the rat femur to assess whether osteogenic matrix cell sheets improve osteogenesis of the irradiated bone. Osteogenic matrix cell sheets were prepared from bone marrow-derived stromal cells and co-transplanted with irradiated bone. X-ray images at 4 weeks after transplantation showed bridging callus formation around the irradiated bone. Micro-computed tomography images at 12 weeks postoperatively showed abundant callus formation in the whole circumference of the irradiated bone. Histology showed bone union between the irradiated bone and host femur. Mechanical testing showed that the failure force at the irradiated bone site was significantly higher than in the control group. Our study indicates that osteogenic matrix cell sheet transplantation might be a powerful method to facilitate osteogenesis in irradiated bones, which may become a treatment option for reconstruction of bone defects after resection of malignant musculoskeletal tumors.

  5. Present status of research within the International Project

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    The short report enumerates the studies which are now completed by the International Project in the Field of Food Irradiation and the studies to be continued. New feeding studies with irradiated fish, rice, spices and mangoes are performed. (MG) [de

  6. Neutron Spectrum Measurements from Irradiations at NCERC

    Energy Technology Data Exchange (ETDEWEB)

    Jackman, Kevin Richard [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mosby, Michelle A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bredeweg, Todd Allen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hutchens, Gregory Joe [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); White, Morgan Curtis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-04-15

    Several irradiations have been conducted on assemblies (COMET/ZEUS and Flattop) at the National Criticality Experiments Research Center (NCERC) located at the Nevada National Security Site (NNSS). Configurations of the assemblies and irradiated materials changed between experiments. Different metallic foils were analyzed using the radioactivation method by gamma-ray spectrometry to understand/characterize the neutron spectra. Results of MCNP calculations are shown. It was concluded that MCNP simulated spectra agree with experimental measurements, with the caveats that some data are limited by statistics at low-energies and some activation foils have low activities.

  7. A method to calibrate a solar pyranometer for measuring reference diffuse irradiance

    Energy Technology Data Exchange (ETDEWEB)

    Reda, I.; Stoffel, T.; Myers, D. [National Renewable Energy Laboratory, Golden, CO (United States)

    2003-02-01

    Accurate pyranometer calibrations, traceable to internationally recognized standards, are critical for solar irradiance measurements. One calibration method is the component summation, where the pyranometers are calibrated outdoors under clear sky conditions, and the reference global solar irradiance is calculated as the sum of two reference components, the diffuse and subtended beam solar irradiances. The beam component is measured with pyrheliometers traceable to the World Radiometric Reference, while there is no internationally recognized reference for the diffuse component. In the absence of such a reference, we present a method to consistently calibrate pyranometers for measuring the diffuse component with an estimated uncertainty of {+-} (3% of reading +1 W/m{sup 2}). The method is based on using a modified shade/unshade method, and pyranometers with less than 1 W/m{sup 2} thermal offset errors. We evaluated the consistency of our method by calibrating three pyranometers four times. Calibration results show that the responsivity change is within {+-} 0.52% for the three pyranometers. We also evaluated the effect of calibrating pyranometers unshaded, then using them shaded to measure diffuse irradiance. We calibrated three unshaded pyranometers using the component summation method. Their outdoor measurements of clear sky diffuse irradiance, from sunrise to sundown, showed that the three calibrated pyranometers can be used to measure the diffuse irradiance to within {+-} 1.4 W/m{sup 2} variation from the reference irradiance. (author)

  8. Food irradiation methodology : prospect and retrospect

    International Nuclear Information System (INIS)

    Nadkarni, G.B.

    1987-01-01

    Research and development work in food irradiation over the past several years has been essentially directed towads answering all possible questions in respect of the suitability of the process, quality of materials and safety for human use. A major effort was indeed, around the toxicological evaluation, till it was recognised internationally that irradiated items of food do not present any health hazards. This recognition along with the awareness of the hazards in the use of chemicals has resulted in a renewed interest in the use of radiations for preservation of food. Radiation preservation of food would reach the stage of practical application with additional information on design and functional aspects of radiation sources, appropriate for specific commodities. Each items has a particular dose requirement depending on the purpose of irradiation and the type of handling. 21 refs. (author)

  9. Irradiation of meningioma: a prototype circumscribed tumor for planning high-dose irradiation of the brain

    International Nuclear Information System (INIS)

    Friedman, M.

    1977-01-01

    The purpose of this report is to provide specific data concerning the radiation dose required to destroy meningioma, and to demonstrate that radiation doses much greater than the alleged tolerance dose, can be administered to the brain in some patients. Most meninglomas are not responsive to irradiation, but, some surgically incurable lesions benefit from irradiation with radically high doses to small volumes of tissue. The arrest of 7 of 12 consecutive meningiomas in adults for periods of 2 to 17 years following maximum tumor doses up to 8800 R in 40 days is reported in this paper. All patients, when irradiated, had active tumor in the form of inoperable primary tumor, recurrence, or known postoperative residual tumor. Three of the successful results were achieved with orthovoltage radiation. The incidence of brain damage may be acceptable to the patient when it is related to arrest of tumor growth but he must be forewarned of possible brain damage. The factors influencing the radioresponsiveness of meningioma are: the required tumor lethal dose, histology and vascularity of the tumor, anatomical site in the brain, treatment technique for each tumor site, small size of the treated volume, growth rate of the tumor, displacement of normal brain tissue by tumor, inherent individual variations of tumor and normal tissues, quality of the radiation, and tolerance of normal brain tissues. The role of these factors is discussed in the light of modern radiobiological concepts

  10. The economics of biomedical waste irradiation: key issues influencing total cost

    International Nuclear Information System (INIS)

    Wilson, B.K.

    1993-01-01

    Each application of gamma irradiation technology is different in one or more significant respects. Disinfection of biomedical wastes presents similar technical challenges to sterilization of medical supplies, but the economic issues are dramatically different. Regulatory requirements, site and technology approvals, waste separation/mixing, transportation, irradiator utilization, economies of scale, and end-product disposal can each have a prohibitive or enabling effect on whether irradiation of biomedical wastes makes good financial sense in a particular situation. This paper discusses each of these issues. (author)

  11. Potential for improvement in estimation of solar diffuse irradiance

    International Nuclear Information System (INIS)

    Muneer, T.; Munawwar, S.

    2006-01-01

    Most of the meteorological stations around the world measure global irradiation and provide information on weather elements. Diffuse radiation measurement, however, is unavailable for many of those sites. This accentuates the need to estimate it whereupon it can be used for the simulation of solar applications. This paper explores the role of synoptic information, e.g. sunshine fraction, cloud cover and air mass on the basic k-k t relationship for nine sites across the globe. The influence on the k-k t regressions is studied qualitatively, and the inclusion of these parameters is suggested based on that. Thus, it is recommended to use the complementary data usually provided with the database apart from the global irradiation in order to estimate the diffuse irradiation more accurately. It was found by analysing each synoptic parameter individually that while the sunshine fraction showed a strong bearing, it was followed closely by cloud cover. Air mass, on the other hand, was found to be a weak parameter for general estimation of diffuse radiation. It was concluded that air mass if coupled with other synoptic parameters might improve the estimation accuracy, but it does not show much promise on its own when used with the global irradiation

  12. Pudendal Nerve and Internal Pudendal Artery Damage May Contribute to Radiation-Induced Erectile Dysfunction

    Energy Technology Data Exchange (ETDEWEB)

    Nolan, Michael W., E-mail: mwnolan@ncsu.edu [Department of Clinical Sciences, and Center for Comparative Medicine and Translational Research, North Carolina State University, Raleigh, North Carolina (United States); Department of Environmental and Radiologic Health Sciences, Colorado State University, Fort Collins, Colorado (United States); Marolf, Angela J. [Department of Environmental and Radiologic Health Sciences, Colorado State University, Fort Collins, Colorado (United States); Ehrhart, E.J. [Department of Microbiology, Immunology and Pathology, Colorado State University, Fort Collins, Colorado (United States); Rao, Sangeeta [Department of Clinical Sciences, Colorado State University, Fort Collins, Colorado (United States); Kraft, Susan L. [Department of Environmental and Radiologic Health Sciences, Colorado State University, Fort Collins, Colorado (United States); Engel, Stephanie [Department of Clinical Sciences, Colorado State University, Fort Collins, Colorado (United States); Yoshikawa, Hiroto; Golden, Anne E. [Department of Environmental and Radiologic Health Sciences, Colorado State University, Fort Collins, Colorado (United States); Wasserman, Todd H. [Department of Radiation Oncology, Washington University, St. Louis, Missouri (United States); LaRue, Susan M. [Department of Environmental and Radiologic Health Sciences, Colorado State University, Fort Collins, Colorado (United States)

    2015-03-15

    Purpose/Objectives: Erectile dysfunction is common after radiation therapy for prostate cancer; yet, the etiopathology of radiation-induced erectile dysfunction (RI-ED) remains poorly understood. A novel animal model was developed to study RI-ED, wherein stereotactic body radiation therapy (SBRT) was used to irradiate the prostate, neurovascular bundles (NVB), and penile bulb (PB) of dogs. The purpose was to describe vascular and neurogenic injuries after the irradiation of only the NVB or the PB, and after irradiation of all 3 sites (prostate, NVB, and PB) with varying doses of radiation. Methods and Materials: Dogs were treated with 50, 40, or 30 Gy to the prostate, NVB, and PB, or 50 Gy to either the NVB or the PB, by 5-fraction SBRT. Electrophysiologic studies of the pudendal nerve and bulbospongiosus muscles and ultrasound studies of pelvic perfusion were performed before and after SBRT. The results of these bioassays were correlated with histopathologic changes. Results: SBRT caused slowing of the systolic rise time, which corresponded to decreased arterial patency. Alterations in the response of the internal pudendal artery to vasoactive drugs were observed, wherein SBRT caused a paradoxical response to papaverine, slowing the systolic rise time after 40 and 50 Gy; these changes appeared to have some dose dependency. The neurofilament content of penile nerves was also decreased at high doses and was more profound when the PB was irradiated than when the NVB was irradiated. These findings are coincident with slowing of motor nerve conduction velocities in the pudendal nerve after SBRT. Conclusions: This is the first report in which prostatic irradiation was shown to cause morphologic arterial damage that was coincident with altered internal pudendal arterial tone, and in which decreased motor function in the pudendal nerve was attributed to axonal degeneration and loss. Further investigation of the role played by damage to these structures in RI-ED is

  13. The effect of U.V.-irradiation on lambda DNA transcription

    International Nuclear Information System (INIS)

    Ranade, S.S.

    1977-01-01

    The effect of U.V.-irradiation of template DNA has been studied in vitro in the E.coli RNA polymerase system with native and U.V.-treated lambda DNA. Lambda DNA was more susceptible to U.V. than was calf-thymus DNA, yet a residual activity was observed at a U.V. dose of 0.5 x 10 4 erg/mm 2 . From the kinetic analysis of the reaction and the incorporation of lambda 32 P-labelled nucleoside triphosphates, it seems reasonable to conclude that U.V.-irradiation probably did not affect the DNA initiation sites, recognizable by RNA polymerase. The transcription products made with U.V.-irradiated lambda DNA were asymmetrical, and hybridized to the right half (R) and the left half (L) of lambda DNA with the ratio of R/L=4/1, and they showed a lower hybridizability than the transcripts with native lambda DNA. The initiation sites recognizable by RNA polymerase seemed to be the same on both native and U.V.-irradiated lambda DNA, though the transcription of U.V.-treated lambda DNA appeared to terminate with rather short RNA chains. (author)

  14. Contributions of the food irradiation technology to the nutritional and alimentary safety

    International Nuclear Information System (INIS)

    Ferreira, Sonia Regina Schauffert

    1999-01-01

    This work is a bibliographic review about the contributions of the food irradiation technology on nutritional and alimentary safety. Subjected to research and development for more than 60 years, these technology was approved by a jointly FAO/WHO/IAEA Expert Committees in 1980 with the conclusion that the irradiation of food up to an overall average dose of 10 kGy present no toxicological hazard and introduce no special nutritional or microbiological problems. Following these conclusions general standards and practices for food irradiation were adopted by the Codex Alimentarium Commission in 1983, opening the possibilities for internal applications and international commerce of irradiated food in many countries. Radiation from radioisotopes sources, electron accelerators or X-ray generators can be applied to food in order to reduce the microbial load, insect disinfestation, improving the shelf life extension of the products. Absorbed doses up to 10 kGy level do not introduce significant alterations in the macro or micro nutrients contents or in the sensorial characteristic of irradiated food. Although food safety can be related with many other important topics, irradiation technology improving food quality, reducing food spoilage during preservation and preventing problems related with food borne disease present a good potential to contribute with the foment and guaranty of the nutritional and alimentary safety. (author)

  15. Femoral neck fracture following groin irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Grigsby, Perry W; Roberts, Heidi L; Perez, Carlos A

    1995-04-30

    Purpose: The incidence and risk factors are evaluated for femoral neck fracture following groin irradiation for gynecologic malignancies. Methods and Materials: The radiation therapy records of 1313 patients with advanced and recurrent cancer of the vagina, vulva, cervix, and endometrium, treated at the Mallinckrodt Institute of Radiology from 1954 to 1992, were reviewed. Median follow-up was 12.7 years. From this group, 207 patients were identified who received irradiation to the pelvis and groins with anterposterior-posterior anterior (AP-PA), 18 MV photons. Data were reviewed regarding irradiation dose to the femoral neck and other presumed risk factors including age, primary site, stage, groin node status, menopausal status, estrogen use, cigarette use, alcohol consumption, and osteoporosis. Results: The per-patient incidence of femoral neck fracture was 4.8% (10 out of 207). Four patients developed bilateral fractures. However, the cumulative actuarial incidence of fracture was 11% at 5 years and 15% at 10 years. Cox multivariate analysis of age, weight, and irradiation dose showed that only irradiation dose may be important to developing fracture. Step-wise logistic regression of presumed prognostic factors revealed that only cigarette use and x-ray evidence of osteoporosis prior to irradiation treatment were predictive of fracture. Conclusion: Femoral head fracture is a common complication of groin irradiation for gynecologic malignancies. Fracture in our database appears to be related to irradiation dose, cigarette use, and x-ray evidence of osteoporosis. Special attention should be given in treatment planning (i.e., shielding of femoral head/neck and use of appropriate electron beam energies for a portion of treatment) to reduce the incidence of this complication.

  16. Femoral neck fracture following groin irradiation

    International Nuclear Information System (INIS)

    Grigsby, Perry W.; Roberts, Heidi L.; Perez, Carlos A.

    1995-01-01

    Purpose: The incidence and risk factors are evaluated for femoral neck fracture following groin irradiation for gynecologic malignancies. Methods and Materials: The radiation therapy records of 1313 patients with advanced and recurrent cancer of the vagina, vulva, cervix, and endometrium, treated at the Mallinckrodt Institute of Radiology from 1954 to 1992, were reviewed. Median follow-up was 12.7 years. From this group, 207 patients were identified who received irradiation to the pelvis and groins with anterposterior-posterior anterior (AP-PA), 18 MV photons. Data were reviewed regarding irradiation dose to the femoral neck and other presumed risk factors including age, primary site, stage, groin node status, menopausal status, estrogen use, cigarette use, alcohol consumption, and osteoporosis. Results: The per-patient incidence of femoral neck fracture was 4.8% (10 out of 207). Four patients developed bilateral fractures. However, the cumulative actuarial incidence of fracture was 11% at 5 years and 15% at 10 years. Cox multivariate analysis of age, weight, and irradiation dose showed that only irradiation dose may be important to developing fracture. Step-wise logistic regression of presumed prognostic factors revealed that only cigarette use and x-ray evidence of osteoporosis prior to irradiation treatment were predictive of fracture. Conclusion: Femoral head fracture is a common complication of groin irradiation for gynecologic malignancies. Fracture in our database appears to be related to irradiation dose, cigarette use, and x-ray evidence of osteoporosis. Special attention should be given in treatment planning (i.e., shielding of femoral head/neck and use of appropriate electron beam energies for a portion of treatment) to reduce the incidence of this complication

  17. Economic feasibility study of potato preservation by irradiation in saudi arabia

    Energy Technology Data Exchange (ETDEWEB)

    Kinsara, A A; Abulfaraj, W H; Mamoon, A M; Kamal, S E [Nuclear Engineering Department, Faculty of Engineering, King Abdulaziz University, Jeddah (Saudi Arabia)

    1997-12-31

    Comprehensive studies were carried out to investigate the economic feasibility of the preservation of potato crop by cobalt-60 gamma irradiation sprout inhibition by potato irradiation was approved by international organization and concerned authorities in many countries. The dose level range authorized for potato sprout inhibition extends from about 80-150 Gy depending on potato variety, time of irradiation after harvest, and post irradiation storage temperature. Sprout inhibition is most effective by irradiation after harvest, and after healing of any inflicted injuries, that when the potatoes are dormant. Irradiation at the recommended doses minimizes storage losses of potatoes that are refrigerated or stored on shelves. Despite the limited data available, an attempt was made to quantify the monetary value of preserving potato by irradiation. With economy scale taken in consideration, potato preservation by irradiation is economically feasible since at the local consumption rates there will be lot of potatoes that ned storage for off season use. 5 tabs.

  18. Capsule Development and Utilization for Material Irradiation Tests

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Bong Goo; Kang, Y H; Cho, M S [and others

    2007-06-15

    The essential technology for an irradiation test of materials and nuclear fuel has been successively developed and utilized to meet the user's requirements in Phase I(July 21, 1997 to March 31, 2000). It enables irradiation tests to be performed for a non-fissile material under a temperature control(300{+-}10 .deg. C) in a He gas environment, and most of the irradiation tests for the internal and external users are able to be conducted effectively. The basic technology was established to irradiate a nuclear fuel, and a creep capsule was also developed to measure the creep property of a material during an irradiation test in HANARO in Phase II(April 1, 2000 to March 31, 2003). The development of a specific purpose capsule, essential technology for a re-irradiation of a nuclear fuel, advanced technology for an irradiation of materials and a nuclear fuel were performed in Phase III(April 1, 2003 to February 28, 2007). Therefore, the technology for an irradiation test was established to support the irradiation of materials and a nuclear fuel which is required for the National Nuclear R and D Programs. In addition, an improvement of the existing capsule design and fabrication technology, and the development of an instrumented capsule for a nuclear fuel and a specific purpose will be able to satisfy the user's requirements. In order to support the irradiation test of materials and a nuclear fuel for developing the next generation nuclear system, it is also necessary to continuously improve the design and fabrication technology of the existing capsule and the irradiation technology.

  19. Evaluation of radiation dose around an old mine of uranium exploitation : case of the Vatovory-Vinaninkarena site

    International Nuclear Information System (INIS)

    RANDRIANTSEHENO, H.F.

    2002-01-01

    All form of life unavoidably exposed to radiation from natural sources. Over the past decade, a growing awareness with regard to potential hazard incurred at work as a consequence of this natural radioactivity has emerged. In the past, the ICRP stated that risks provoked by natural sources of irradiation should not be taken into consideration. But since 1984, it has changed its mind and limits of acceptability concerning radon concentration have been defined. In mining uranium ore, workers and public can receive both external and internal exposure. External exposure comes from beta and gamma radiation emitted from the soil. Internal exposure arises from the inhalation of radon gas and its decay products and from long-lived alpha emitters in ore dust. radon is a radioactive gas released from soils and materials containing radium. Once inhaled in the respiratory tract, its decay products irradiate the tissue and provoke a risk of cancer. The estimation of this risk is carried out through an epidemiologic approach. This work intends to assess the scope of the problem and to review data reported on exposure which may occur around uranium mine site due to natural sources. [fr

  20. IAEA International Database on Irradiated Nuclear Graphite Properties. Summary report of consultants' meeting. 12. meeting of the Technical Steering Committee

    International Nuclear Information System (INIS)

    Chung, H.K.; Wickham, A.J.

    2010-02-01

    The 12th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties was held on 12-13 November 2009 at the IAEA Headquarters, Vienna, Austria. All discussions, recommendations and actions of this Consultants' Meeting are recorded in this report. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database, and make recommendations for action over the next year. This report contains the status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  1. International Benchmark on Numerical Simulations for 1D, Nonlinear Site Response (PRENOLIN) : Verification Phase Based on Canonical Cases

    NARCIS (Netherlands)

    Régnier, Julie; Bonilla, Luis-Fabian; Bard, Pierre-Yves; Bertrand, Etienne; Hollender, Fabrice; Kawase, Hiroshi; Sicilia, Deborah; Arduino, Pedro; Amorosi, Angelo; Asimaki, Dominiki; Pisano, F.

    2016-01-01

    PREdiction of NOn‐LINear soil behavior (PRENOLIN) is an international benchmark aiming to test multiple numerical simulation codes that are capable of predicting nonlinear seismic site response with various constitutive models. One of the objectives of this project is the assessment of the

  2. Studies on neutron irradiation effects of iron alloys and nickel-base heat resistant alloys

    International Nuclear Information System (INIS)

    Watanabe, Katsutoshi

    1987-09-01

    The present paper describes the results of neutron irradiation effects on iron alloys and nickel-base heat resistant alloys. As for the iron alloys, irradiation hardening and embrittlement were investigated using internal friction measurement, electron microscopy and tensile testings. The role of alloying elements was also investigated to understand the irradiation behavior of iron alloys. The essential factors affecting irradiation hardening and embrittlement were thus clarified. On the other hand, postirradiation tensile and creep properties were measured of Hastelloy X alloy. Irradiation behavior at elevated temperatures is discussed. (author)

  3. Development of lithium target system in engineering validation and engineering design activity of the international fusion materials irradiation facility (IFMIF/EVEDA)

    International Nuclear Information System (INIS)

    Wakai, Eiichi; Kondo, Hiroo; Sugimoto, Masayoshi; Ida, Mizuho; Kanemura, Takuji; Watanabe, Kazuyoshi; Fujishiro, Kouji; Edao, Yuuki; Niitsuma, Shigeto; Kimura, Haruyuki; Fukada, Satoshi; Hiromoto, Tetsushi; Shigeharu, Satoshi; Yagi, Jyuro; Furukawa, Tomohiro; Hirakawa, Yasushi; Suzuki, Akihiro; Terai, Takayuki; Horiike, Hiroshi; Hoashi, Eiji; Suzuki, Sachiko; Yamaoka, Nobuo; Serizawa, Hisashi; Kawahito, Yosuke; Tsuji, Yoshiyuki; Furuya, Kazuyuki; Takeo, Fumio

    2012-01-01

    Engineering validation and engineering design activity (EVEDA) for the international fusion materials irradiation facility (IFMIF) has been conducted since 2007. Research and development of the Lithium target facility is an important part of this activity. We constructed a world largest liquid Lithium test loop with a capacity of 5000 L in 2010 and successfully completed the first stage validation tests (functional tests of components and Lithium flow test (flow velocity 15 m/s at the target). In the present article, recent results of the EVEDA activity for the Lithium target facility and related technologies on liquid Lithium are reviewed. (author)

  4. Food irradiation: outlook for commercialization in the United States

    International Nuclear Information System (INIS)

    Giddings, G.G.

    1985-01-01

    An account is presented of the long-term and near-term outlooks for food irradiation in the United States, with particular reference to US regulatory status and to the problems of securing public acceptance of the process. Actions taken by international organizations to consider and determine whether irradiated food is wholesome are summarized. A table is included showing dose levels for various food applications. Political and sociological aspects are discussed. (U.K.)

  5. Irradiation for sprouting inhibition of Kponan yams in Cote d'Ivoire

    International Nuclear Information System (INIS)

    Kodia, A.A.

    2002-01-01

    Yams of the Kponan variety were transported from Abidjan, Cote d'Ivoire, to Accra, Ghana, irradiated at the facility operated by the Ghana Atomic Energy Commission and brought back to Abidjan, Cote d'Ivoire. The law no 98-593 on radiation protection and nuclear safety was promulgated on 10 November 1998. In its article 8 it is said that food and industrial products irradiation facilities shall comply with the requirements of the International Code of Practice. The regulations on food irradiation based on this main law are now being considered for promulgation. The lack of regulations makes it difficult to legally conduct test marketing of irradiated yams. The economic feasibility of irradiating yams in Ghana and selling them in Cote d'Ivoire has been investigated. (author)

  6. International Schools as Sites of Social Change

    Science.gov (United States)

    Dunne, Sandra; Edwards, Julie

    2010-01-01

    This article examines the potential of international schools to act as agents of social transformation in developing countries. The method comprises a case study at two international schools in the Philippines. The case study explored ways in which schools foster host-national students' sense of social responsibility, particularly through…

  7. Acute effect of gamma irradiation on the gastric mucosa

    International Nuclear Information System (INIS)

    Dubois, A.; Dorval, E.D.; Rogers, J.E.; O'Connell, L.; Durakovic, A.; Conklin, J.J.

    1984-01-01

    The effect of gamma irradiation on the gastric mucosa has been studied in a primate model by evaluating endoscopically the rate of healing of gastric biopsies. Six male rhesus monkeys were subjected to fiberoptic gastroscopies performed under general anesthesia before and after total body exposure to Cobalt-60 (800 rads). Gastric biopsies were taken 3 hours and 2, 7, and 9 days after irradiation and examined using light microscopy. Gastric biopsies were found to heal in 3 days before irradiation; in contrast, they were still present 7 and 9 days after the biopsies in irradiated animals. Microscopic examination of the biopsies taken outside of the ulcer craters did not demonstrate any significant changes of the gastric surface epithelial cells. These data demonstrate that a gastric ulcer develops at the site of each endoscopic biopsy in irradiated monkeys whereas complete healing is observed in non-irradiated animals. The cause of this observation is unclear but it could be due to radiation induced suppression of the mitotic activity and of the cell renewal of gastric surface epithelial cells

  8. Influence of interstitial impurity atoms on point defect relaxation in neutron irradiated iron

    International Nuclear Information System (INIS)

    Weller, M.; Diehl, J.

    1975-01-01

    The aim of the investigation was to study the combined influence of neutron irradiation and interstitial impurities on the low temperature internal friction peaks as well as on those appearing at higher temperatures after annealing, in a more systematic manner, using irradiations at [de

  9. Post-irradiation vasculopathy of intracranial major arteries in children; Report of two cases

    Energy Technology Data Exchange (ETDEWEB)

    Nishizawa, Shigeru; Ryu, Hiroshi; Yokoyama, Tetsuo; Ninchoji, Toshiaki; Shimoyama, Ichiro; Yamamoto, Seiji; Uemura, Kenichi [Hamamatsu Univ. School of Medicine, Shizuoka (Japan)

    1991-06-01

    We report two rare cases of post-irradiation vasculopathy of intracranial major arteries in children. A 13-year-old girl suffered from transient right hemiparesis 1 year after irradiation for suprasellar germinoma. Left carotid angiograms revealed marked stenoses of the intracranial internal carotid, middle cerebral, and anterior cerebral arteries, which were previously normal, and moyamoya vessels. A 2.5-year-old girl underwent internal irradiation with {sup 198}Au colloid for cystic craniopharyngioma. At the age of 10 years, she suddenly became unconscious after vomiting. Computed tomographic scans showed a right frontal intracerebral hematoma. Right carotid angiograms disclosed complete obstruction of the intracranial internal carotid, middle cerebral, and anterior cerebral arteries and moyamoya vessels, previously not present. The danger of radiation therapy causing occlusive vasculopathy in small and major cerebral arteries in children is emphasized. To prevent permanent ischemic neurological deficits, vasculopathy should be treated either medically or surgically as early as possible. (author).

  10. Educative campaign about information on irradiated foods; Campana educativa sobre informacion de alimentos irradiados

    Energy Technology Data Exchange (ETDEWEB)

    Luna C, P C

    1991-07-15

    The irradiation of foods is accepted by international agencies (FAO, OMS) like a healthy and effective technology at the moment the irradiated foods are marketed easily in many countries, however in other countries exist several factors that affect the practical application of this process. In this work is planned about an educational campaign about the irradiation process directed to the consumers. (Author)

  11. Study of irradiation effects in austenitic stainless steels

    Energy Technology Data Exchange (ETDEWEB)

    Etienne, A. [GPM UMR CNRS 6634, Universite et INSA de Rouen (France); Material Department, University of California, Santa Barbara (United States); Pareige, P.; Radiguet, B. [GPM UMR CNRS 6634, Universite et INSA de Rouen (France); Cunningham, N.J.; Odette, G.O. [Material Department, University of California, Santa Barbara (United States); Pokor, C. [EDF RD, departement MMC, site des Renardieres, Moret-sur-Loing (France)

    2011-07-01

    Chemical analyses using Atom Probe Tomography were performed on a bolt made of cold worked 316 austenitic stainless steel, extracted from the internal structures of a pressurized water reactor after seventeen years of reactor service. The irradiation temperature of these samples was 633 K and the irradiation dose was estimated to 12 dpa. These analyses have shown that neutron irradiation has a strong effect on the intragranular distribution of solute atoms. A very high number density (6.10{sup 23} m{sup -3}) of Ni-Si enriched and Cr-Fe depleted clusters was detected after irradiation. In order to bring complementary experimental results and to determine the mechanism of formation of these Ni-Si nano-clusters, Fe{sup 5+} ion irradiations have been performed on a 316 austenitic stainless steel. As after neutron irradiation, the formation of solute enriched features is observed. Linear features and two kinds of clusters, rounded and torus shaped, are present. Considering that solute enriched features are probably formed by radiation induced segregation on point defect sinks, these different shapes are due to the nature of the sinks where segregation occurs. (authors)

  12. Radiometric ratio characterization for low-to-mid CPV modules operating in variable irradiance conditions

    Science.gov (United States)

    Vorndran, Shelby; Russo, Juan; Zhang, Deming; Gordon, Michael; Kostuk, Raymond

    2012-10-01

    In this work, a concentrating photovoltaic (CPV) design methodology is proposed which aims to maximize system efficiency for a given irradiance condition. In this technique, the acceptance angle of the system is radiometrically matched to the angular spread of the site's average irradiance conditions using a simple geometric ratio. The optical efficiency of CPV systems from flat-plate to high-concentration is plotted at all irradiance conditions. Concentrator systems are measured outdoors in various irradiance conditions to test the methodology. This modeling technique is valuable at the design stage to determine the ideal level of concentration for a CPV module. It requires only two inputs: the acceptance angle profile of the system and the site's average direct and diffuse irradiance fractions. Acceptance angle can be determined by raytracing or testing a fabricated prototype in the lab with a solar simulator. The average irradiance conditions can be found in the Typical Metrological Year (TMY3) database. Additionally, the information gained from this technique can be used to determine tracking tolerance, quantify power loss during an isolated weather event, and do more sophisticated analysis such as I-V curve simulation.

  13. Irradiation growth of Zircaloy (LWBR) development program

    International Nuclear Information System (INIS)

    Williard, H.J.

    1984-01-01

    Irradiation growth of recrystallized annealed (RXA) Zircaloy is divided into four stages and a model is presented to account for each stage. Stage I is a short time, low-strain transient caused by the accumulation of point defects, small interstitial loops, and vacancy clusters. Stage II is a quasi-steady-state region of relatively low strain rate during which the loops grow and intrinsic dislocations climb. Stage III is a transient during which the strain rate increases due to the production and motion of irradiation-induced dislocation lines. Stage IV is a high-strain-rate, steady-state region during which nonrecoverable strain is caused predominantly by glide of the irradiationinduced dislocations. The proposed model is based on two new mechanisms: (1) direct production of an interstitial dislocation loop accompanied by a vacancy cluster in the primary damage event, and (2) production of dislocations due to the activation of Frank-Read sources by internal stresses caused by interaction of the loops with themselves and with intrinsic (cold work) dislocations. Nonconservative, recoverable strain is due to climb of all dislocations, whereas conservative, nonrecoverable strain is caused by glide of irradiation-induced and intrinsic dislocations under the action of the internal stress. The conservative strain follows a (1-3f) texture dependence

  14. Regional Nodal Irradiation in Early-Stage Breast Cancer.

    Science.gov (United States)

    Whelan, Timothy J; Olivotto, Ivo A; Parulekar, Wendy R; Ackerman, Ida; Chua, Boon H; Nabid, Abdenour; Vallis, Katherine A; White, Julia R; Rousseau, Pierre; Fortin, Andre; Pierce, Lori J; Manchul, Lee; Chafe, Susan; Nolan, Maureen C; Craighead, Peter; Bowen, Julie; McCready, David R; Pritchard, Kathleen I; Gelmon, Karen; Murray, Yvonne; Chapman, Judy-Anne W; Chen, Bingshu E; Levine, Mark N

    2015-07-23

    Most women with breast cancer who undergo breast-conserving surgery receive whole-breast irradiation. We examined whether the addition of regional nodal irradiation to whole-breast irradiation improved outcomes. We randomly assigned women with node-positive or high-risk node-negative breast cancer who were treated with breast-conserving surgery and adjuvant systemic therapy to undergo either whole-breast irradiation plus regional nodal irradiation (including internal mammary, supraclavicular, and axillary lymph nodes) (nodal-irradiation group) or whole-breast irradiation alone (control group). The primary outcome was overall survival. Secondary outcomes were disease-free survival, isolated locoregional disease-free survival, and distant disease-free survival. Between March 2000 and February 2007, a total of 1832 women were assigned to the nodal-irradiation group or the control group (916 women in each group). The median follow-up was 9.5 years. At the 10-year follow-up, there was no significant between-group difference in survival, with a rate of 82.8% in the nodal-irradiation group and 81.8% in the control group (hazard ratio, 0.91; 95% confidence interval [CI], 0.72 to 1.13; P=0.38). The rates of disease-free survival were 82.0% in the nodal-irradiation group and 77.0% in the control group (hazard ratio, 0.76; 95% CI, 0.61 to 0.94; P=0.01). Patients in the nodal-irradiation group had higher rates of grade 2 or greater acute pneumonitis (1.2% vs. 0.2%, P=0.01) and lymphedema (8.4% vs. 4.5%, P=0.001). Among women with node-positive or high-risk node-negative breast cancer, the addition of regional nodal irradiation to whole-breast irradiation did not improve overall survival but reduced the rate of breast-cancer recurrence. (Funded by the Canadian Cancer Society Research Institute and others; MA.20 ClinicalTrials.gov number, NCT00005957.).

  15. Practical models to estimate horizontal irradiance in clear sky conditions: Preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Salazar, German A.; Hernandez, Alejandro L.; Saravia, Luis R. [Department of Physics, School of Exact Sciences, National University of Salta, Bolivia Avenue 5150, 4400 Salta Capital (Argentina); INENCO (Institute of Non Conventional Energy Research), Bolivia Avenue 5150, 4400 Salta Capital (Argentina)

    2010-11-15

    The Argentinean Northwest (ANW) is a high altitude region located alongside Los Andes Mountains. The ANW is also one of the most insolated regions in the world due to its altitude and particular climate. However, the characterization of the solar resource in the region is incomplete as there are no stations to measure solar radiation continuously and methodically. With irradiance data recently having been measured at three sites in the Salta Province, a study was carried out that resulted in a practical model to quickly and efficiently estimate the horizontal irradiance in high altitude sites in clear sky conditions. This model uses the altitude above sea level (A) as a variable and generates a representative clearness index as a result (k{sub t-R}) that is calculated for each site studied. This index k{sub t-R} is then used with the relative optical air mass and the extraterrestrial irradiance to estimate the instantaneous clearness index (k{sub t}). Subsequently, the index k{sub t-R} is corrected by introducing the atmospheric pressure in the definition of relative optical air mass proposed by Kasten. The results are satisfactory as errors in the irradiance estimations with respect to measured values do not exceed 5% for pressure corrected air masses AM{sub c} < 2. This model will be used in a feasibility study to locate sites for the installation of solar thermal power plants in the ANW. A prototype of a CLFR solar power plant is being built in the INENCO Campus, at the National University of Salta. (author)

  16. Intestinal uptake of bile acids: effect of external abdominal irradiation

    International Nuclear Information System (INIS)

    Thomson, A.B.R.; Cheeseman, C.I.; Walker, K.

    1984-01-01

    Abdominal irradiation has recently been shown to influence the uptake of hexoses, amino acids, fatty acids and cholesterol into the jejunum of rats. The present studies were undertaken with a previously validated in vitro technique to determine the effect of abdominal irradiation from a cesium source on the rates of uptake of six bile acids into the jejunum, ileum, and colon. The results show that: 1) there likely are multiple ileal carriers for bile acids: 2) abdominal irradiation has a variable effect on these carriers; 3) the passive permeability to bile acids varies with the bile acid and with the site along the intestine; and 4) abdominal irradiation is associated with a rise in the colonic permeability to only some bile acids

  17. Irradiation processing of food items for exports

    International Nuclear Information System (INIS)

    Sareen, Shashi

    1998-01-01

    Globalization has led to rapid increases in international food trade. About 460 million metric tonnes of foodstuffs are traded annually of a value to the order of 300 billion US dollar. With such high trade figures, it is imperative to provide safe and nutritious foods to consumers and to minimize food losses due to spoilage. Food irradiation is a technology which has been under study and debate since fifties for the purpose of food preservation. This technology has been extensively reviewed and studied at international levels and by several countries and on the basis of these, a number of countries have permitted the use of irradiation for specified foods and are also applying it on commercial scale. In this paper, a review of the status and importance of this technology has been brought out to include the application of the technology and its perceived benefits, acceptance of the technology at the international level and by different countries including the scenario in India, the various types of concerns expressed by Governments as well as consumers and specific areas with regard to exports for which the technology would be beneficial. (author)

  18. Myelin repair by Schwann cells in the regenerating goldfish visual pathway: regional patterns revealed by X-irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Nona, S.N.; Stafford, C.A.; Cronly-Dillon, J.R. (Manchester Univ. (United Kingdom). Inst. of Science and Technology); Duncan, A. (Guy' s Hospital, London (United Kingdom). Dept. of Anatomy); Scholes, J. (University Coll., London (United Kingdom))

    1994-07-01

    In the regenerating goldfish optic nerves, Schwann cells of unknown origin reliably infiltrate the lesion site forming a band of peripheral-type myelinating tissue by 1-2 months, sharply demarcated form the adjacent new CNS myelin. To investigate this effect, we have interfered with cell proliferation by locally X-irradiating the fish visual pathway 24 h after the lesion. As assayed by immunohistochemistry and EM, irradiation retards until 6 months formation of new myelin by Schwann cells at the lesion site, and virtually abolishes oligodendrocyte myelination distally, but has little or no effect on nerve fibre regrowth. Optic nerve astrocyte processes normally fail to re-infiltrate the lesion, but re-occupy it after irradiation, suggesting that they are normally excluded by early cell proliferation at this site. Moreover, scattered myelinating Schwann cells also appear in the oligodendrocyte-depleted distal optic nerve after irradiation, although only as far as the optic tract. (Author).

  19. Is there an improvement on the Web sites of the national and international pharmaceutical companies in Turkey? A follow-up study.

    Science.gov (United States)

    Yegenoglu, Selen; Aslan, Dilek; Sozen, Bilge

    2012-04-01

    In this follow-up study, we aimed to assess national and international pharmaceutical companies' Web sites using guidelines of The Association of Research-Based Pharmaceutical Companies (AIFD) and Pharmaceutical Manufacturers Association of Turkey (IEIS) to define whether there has been progress since 2004. We used two national guidelines in order to evaluate the Web sites of pharmaceutical companies in our study. The first guideline was from IEIS, and the second was from AIFD, which was issued recently. We collected our data between February 1 and April 30, 2011. Data analyses were performed using SPSS version 15.0. Chi squared test was done for comparing the two assessments in different years (2004 and 2011). In general, the progress that we were expecting was not satisfactory for both the international and national companies. The percentage of unmet criteria increased for "links" (from 48.0% to 52.0%) and for "mentioning the responsible person/firm for the Web site design" (from 40.6% to 59.4%) among national companies. We observed statistically significant progress only for the "information for the public" criterion (from 52.9% to 100%) among international companies. On the other hand, there was progress and a statistically significant difference in terms of not displaying any "drug ads" on the Web sites of national firms (from 55.9% to 87.5%), availability of "mail address" (from 88.2% to 100%), "telephone number" (from 88.2% to 100%), "indication of the target group" (from 23.5% to 52.1%), and "disclaimer stating the given information cannot replace a physician or pharmacist" (from 29.4% to 53.1%). Our major recommendation to pharmaceutical companies is to update their Web sites with evidence-based scientific information about themselves and their products using international and national standards. From the companies' perspective, this should be a priority responsibility based on the ethical aspect of individual and community health.

  20. Characterization of damage in γ-irradiated and OsO4-treated DNA using methoxyamine

    International Nuclear Information System (INIS)

    Liuzzi, M.; Talpaert-Borle, M.

    1988-01-01

    Unlabelled and radiolabelled methoxyamine have been used to characterize DNA damage caused by γ-rays or by the chemical reagent osmium tetroxide (OsO 4 ). Both treatments introduce in DNA a number of methoxyamine-binding sites proportional to the dose. Whereas the number of these sites remains constant after the OsO 4 treatment it increases during postirradiation incubation; the postirradiation appearance of methoxyamine-binding sites is enhanced by the presence of methoxyamine. OsO 4 treatment and γ-irradiation also induce the formation of alkali-labile sites in DNA. Whereas the number of these sites remains constant after OsO 4 treatment, it increases during postirradiation incubation and an alkaline medium accelerates their formation. A fraction of the alkali-labile sites found in γ-irradiated DNA is methoxyamine-labile; by contrast, the OsO 4 -treated DNA is stable in the presence of methoxyamine. (author)