Comparison of marginal and internal fit of 3-unit ceramic fixed dental prostheses made with either a conventional or digital impression.

Science.gov (United States)

Su, Ting-Shu; Sun, Jian

2016-09-01

For 20 years, the intraoral digital impression technique has been applied to the fabrication of computer aided design and computer aided manufacturing (CAD-CAM) fixed dental prostheses (FDPs). Clinical fit is one of the main determinants of the success of an FDP. Studies of the clinical fit of 3-unit ceramic FDPs made by means of a conventional impression versus a digital impression technology are limited. The purpose of this in vitro study was to evaluate and compare the internal fit and marginal fit of CAD-CAM, 3-unit ceramic FDP frameworks fabricated from an intraoral digital impression and a conventional impression. A standard model was designed for a prepared maxillary left canine and second premolar and missing first premolar. The model was scanned with an intraoral digital scanner, exporting stereolithography (STL) files as the experimental group (digital group). The model was used to fabricate 10 stone casts that were scanned with an extraoral scanner, exporting STL files to a computer connected to the scanner as the control group (conventional group). The STL files were used to produce zirconia FDP frameworks with CAD-CAM. These frameworks were seated on the standard model and evaluated for marginal and internal fit. Each framework was segmented into 4 sections per abutment teeth, resulting in 8 sections per framework, and was observed using optical microscopy with ×50 magnification. Four measurement points were selected on each section as marginal discrepancy (P1), mid-axial wall (P2), axio-occusal edge (P3), and central-occlusal point (P4). Mean marginal fit values of the digital group (64 ±16 μm) were significantly smaller than those of the conventional group (76 ±18 μm) (Pdigital group (111 ±34 μm) were significantly smaller than those of the conventional group (132 ±44 μm) (Pdigital and conventional impressions showed clinically acceptable marginal and internal fit. The marginal and internal fit of frameworks fabricated from the intraoral

The FORCE Fitness Profile--Adding a Measure of Health-Related Fitness to the Canadian Armed Forces Operational Fitness Evaluation.

Science.gov (United States)

Gagnon, Patrick; Spivock, Michael; Reilly, Tara; Mattie, Paige; Stockbrugger, Barry

2015-11-01

In 2013, the Canadian Armed Forces (CAF) implemented the Fitness for Operational Requirements of Canadian Armed Forces Employment (FORCE), a field expedient fitness test designed to predict the physical requirements of completing common military tasks. Given that attaining this minimal physical fitness standard may not represent a challenge to some personnel, a fitness incentive program was requested by the chain of command to recognize and reward fitness over and above the minimal standard. At the same time, it was determined that the CAF would benefit from a measure of general health-related fitness, in addition to this measure of operational fitness. The resulting incentive program structure is based on gender and 8 age categories. The results on the 4 elements of the FORCE evaluation were converted to a point scale from which normative scores were derived, where the median score corresponds to the bronze level, and silver, gold, and platinum correspond to a score which is 1, 2, and 3 SDs above this median, respectively. A suite of rewards including merit board point toward promotions and recognition on the uniform and material rewards was developed. A separate group rewards program was also tabled, to recognize achievements in fitness at the unit level. For general fitness, oxygen capacity was derived from FORCE evaluation results and combined with a measure of abdominal circumference. Fitness categories were determined based on relative risks of mortality and morbidity for each age and gender group. Pilot testing of this entire program was performed with 624 participants to assess participants' reactions to the enhanced test, and also to verify logistical aspects of the electronic data capture, calculation, and transfer system. The newly dubbed fitness profile program was subsequently approved by the senior leadership of the CAF and is scheduled to begin a phased implementation in June 2015.

The reproducibility and accuracy of internal fit of Cerec 3D CAD/CAM all ceramic crowns.

LENUS (Irish Health Repository)

D'Arcy, Brian L

2009-06-01

The objective of this study was to evaluate the reproducibility and accuracy of internal fit using Cerec 3D CAD\\/CAM (computer aided design\\/computer aided manufacturing) all-ceramic crowns and to investigate the proximal contact point areas between the crowns and neighbouring teeth, in terms of location and the presence or absence of contact. A total of 48 crowns were milled and divided into two groups of twenty-four each. One group consisted of testing a Control die and the other group consisted of testing single Replica stone die duplicates of the Control die. The Internal Marginal Gap, Axio-Occlusal Transition Gap and Occlusal Gap were measured on each crown in both groups. No significant differences were identified between the mean thickness of the Marginal Gap, the Axio-Occlusal Transition Gap and the Occlusal Gap of the Control die when compared with the Replica dies indicating uniformity and consistency of the accuracy of fit and therefore die replication.

Internal fit of pressed and computer-aided design/computer-aided manufacturing ceramic crowns made from digital and conventional impressions.

Science.gov (United States)

Anadioti, Evanthia; Aquilino, Steven A; Gratton, David G; Holloway, Julie A; Denry, Isabelle L; Thomas, Geb W; Qian, Fang

2015-04-01

No studies have evaluated the internal adaptation of pressed and milled ceramic crowns made from digital impressions. The purpose of this in vitro study was to evaluate the internal fit of pressed and milled ceramic crowns made from digital and conventional impressions. Thirty polyvinyl siloxane (PVS) impressions and 30 Lava COS impressions made of a prepared dentoform tooth (master die) were fabricated. Thirty crowns were pressed in lithium disilicate (IPS e.max Press), and 30 crowns were milled from lithium disilicate blocks (IPS e.max CAD) (15/impression technique) with the E4D scanner and milling engine. The master die and the intaglio of the crowns were digitized with a 3-dimensional laser coordinate measurement machine. The digital master die and intaglio of each crown were merged. The distance between the die and the intaglio surface of the crown was measured at 3 standardized points. One-way ANOVA was used for statistical analysis (α=.05). One-way ANOVA revealed that the internal gap obtained from the Lava/press group (0.211 mm, ±SD 0.041) was significantly greater than that obtained from the other groups (Pdigital impression and pressed crown produced the least accurate internal fit. Copyright © 2015. Published by Elsevier Inc.

The MacArthur Competence Assessment Tool-Fitness to Plead: a preliminary evaluation of a research instrument for assessing fitness to plead in England and Wales.

Science.gov (United States)

Akinkunmi, Akintunde A

2002-01-01

This study concerns the preliminary evaluation of an instrument, the MacArthur Competence Assessment Tool-Fitness to Plead (MacCAT-FP), for assessing competence to stand trial, according to the legal requirements in England and Wales. The purposes of the study were to ascertain whether the instrument can be administered practically to groups of prisoners, both those with mental illness and those without; to examine its internal consistency and interrater reliability; to determine whether it can distinguish between fit and unfit individuals, as judged by expert forensic psychiatrists; and to discover whether it is sensitive to changes over time. The instrument was administered to two groups of remanded prisoners: those transferred to psychiatric units for treatment and those without mental illness. In addition to the MacCAT-FP, scales measuring symptom severity and IQ were administered to all participants. Results suggest that the instrument is practical, with good internal consistency and interrater reliability. The correlation of scores with psychiatrists' opinions as to fitness was 0.77. Scores of unfit patients were significantly different from those of fit individuals. The instrument was able to detect significant differences in scores over time. It is suggested that once the instrument has been further validated for research purposes, it may be developed for clinical application.

Influence of Different CAM Strategies on the Fit of Partial Crown Restorations: A Digital Three-dimensional Evaluation.

Science.gov (United States)

Zimmermann, M; Valcanaia, A; Neiva, G; Mehl, A; Fasbinder, D

2018-04-09

CAM fabrication is an important step within the CAD/CAM process. The internal fit of restorations is influenced by the accuracy of the subtractive CAM procedure. Little is known about how CAM strategies might influence the fit of CAD/CAM fabricated restorations. The aim of this study was to three-dimensionally evaluate the fit of CAD/CAM fabricated zirconia-reinforced lithium silicate ceramic partial crowns fabricated with three different CAM strategies. The null hypothesis was that different CAM strategies did not influence the fitting accuracy of CAD/CAM fabricated zirconia-reinforced lithium silicate ceramic partial crowns. Preparation for a partial crown was performed on a maxillary right first molar on a typodont. A chairside CAD/CAM system with the intraoral scanning device CEREC Omnicam (Dentsply Sirona, York, PA, USA) and the 3+1 axis milling unit CEREC MCXL was used. There were three groups with different CAM strategies: step bur 12 (12), step bur 12S (12S), and two step-mode (12TWO). The zirconia-reinforced lithium silicate ceramic Celtra Duo (Dentsply Sirona) was used as the CAD/CAM material. A new 3D method for evaluating the fit was applied, consisting of the quadrant scan with the intraoral scanning device CEREC Omnicam. The scan of the PVS material adherent to the preparation and the preparation scan were matched, and the difference analysis was performed with special software OraCheck (Cyfex AG, Zurich, Switzerland). Three areas were selected for analysis: margin (MA), axial (AX), and occlusal (OC). Statistical analysis was performed using 80% percentile, one-way ANOVA, and the post hoc Scheffé test with α=0.05. Statistically significant differences were found both within and between the test groups. The aspect axial fit results varied from 90.5 ± 20.1 μm for the two-step milling mode (12TWO_AX) to 122.8 ± 12.2 μm for the milling with step bur 12S (12S_AX). The worst result in all groups was found for the aspect occlusal fit with the highest

Marginal and internal fit of nano-composite CAD/CAM restorations

Directory of Open Access Journals (Sweden)

So-Hyun Park

2016-02-01

Full Text Available Objectives The purpose of this study was to compare the marginal and internal fit of nano-composite CAD-CAM restorations. Materials and Methods A full veneer crown and an mesio-occluso-distal (MOD inlay cavity, which were prepared on extracted human molars, were used as templates of epoxy resin replicas. The prepared teeth were scanned and CAD-CAM restorations were milled using Lava Ultimate (LU and experimental nano-composite CAD/CAM blocks (EB under the same milling parameters. To assess the marginal and internal fit, the restorations were cemented to replicas and were embedded in an acrylic mold for sectioning at 0.5 mm intervals. The measured gap data were pooled according to the block types and measuring points for statistical analysis. Results Both the block type and measuring point significantly affected gap values, and their interaction was significant (p = 0.000. In crowns and inlays made from the two blocks, gap values were significantly larger in the occlusal area than in the axial area, while gap values in the marginal area were smallest (p < 0.001. Among the blocks, the restorations milled from EB had a significantly larger gap at all measuring points than those milled from LU (p = 0.000. Conclusions The marginal and internal gaps of the two nano-composite CAD/CAM blocks differed according to the measuring points. Among the internal area of the two nano-composite CAD/CAM restorations, occlusal gap data were significantly larger than axial gap data. The EB crowns and inlays had significantly larger gaps than LU restorations.

Comparison of fit accuracy and torque maintenance of zirconia and titanium abutments for internal tri-channel and external-hex implant connections

OpenAIRE

Siadat, Hakimeh; Beyabanaki, Elaheh; Mousavi, Niloufar; Alikhasi, Marzieh

2017-01-01

PURPOSE This in vitro study aimed to evaluate the effect of implant connection design (external vs. internal) on the fit discrepancy and torque loss of zirconia and titanium abutments. MATERIALS AND METHODS Two regular platform dental implants, one with external connection (Br?nemark, Nobel Biocare AB) and the other with internal connection (Noble Replace, Nobel Biocare AB), were selected. Seven titanium and seven customized zirconia abutments were used for each connection design. Measurement...

Evaluation of the Fitness of Glass-Infiltrated Zirconia Core in Maxillary Central Incisor.

Science.gov (United States)

Kim, Ji-Won; Oh, Gye-Jeong; Lim, Hyun-Pil; Yun, Kwi-Dug; Park, Chan; Lee, Kyung-Ku; Ban, Jae-Sam; Park, Sang-Won; Yim, Eun-Kyung

2018-02-01

The purpose of this study was to evaluate the fitness of zirconia cores according to the amount and treated surface of glass infiltration. A maxillary right central incisor customized abutment was milled to have a 6° slope and a 1 mm deep chamfer margin and was manufactured in an intaglio mold using silicone impression material. Fifty-six stone dies were produced by injecting high strength dental stone into a mold and then zirconia cores were milled with CAD/CAM systems. The control group (Control) used non glass-infiltrated zirconia, and the experiment group was divided by one with the glass and distilled water ratio of 1:300 and the other with the ratio of 1:100. Each group was divided into subgroups by glasstreated surface: external surface infiltration, internal surface infiltration, and both surface infiltration. The zirconia cores sintered after glass infiltration were attached to the stone dies and then cut. Afterwards, the absolute marginal discrepancies and internal gaps of the buccal and lingual sides were measured. The buccal absolute marginal discrepancies and lingual internal gaps were influenced by the glass infiltration amount (p 0.05). As a result of the above experiments, the glass-infiltrated zirconia cores showed a clinically acceptable fitness, which is within 120 μm. This means that glass infiltration can be clinically used.

Marginal Accuracy and Internal Fit of Dental Copings Fabricated by Modern Additive and Subtractive Digital Technologies.

Science.gov (United States)

Nelson, Neha; K S, Jyothi; Sunny, Kiran

2017-03-01

The margins of copings for crowns and retainers of fixed partial dentures affect the progress of microleakage and dental caries. Failures occur due to altered fit which is also influenced by the method of fabrication. An in-vitro study was conducted to determine among the cast base metal, copy milled zirconia, computer aided designing computer aided machining/manufacturing zirconia and direct metal laser sintered copings which showed best marginal accuracy and internal fit. Forty extracted maxillary premolars were mounted on an acrylic model and reduced occlusally using a milling machine up to a final tooth height of 4 mm from the cementoenamel junction. Axial reduction was accomplished on a surveyor and a chamfer finish line was given. The impressions and dies were made for fabrication of copings which were luted on the prepared teeth under standardized loading, embedded in self-cure acrylic resin, sectioned and observed using scanning electron microscope for internal gap and marginal accuracy. The copings fabricated using direct metal laser sintering technique exhibited best marginal accuracy and internal fit. Comparison of mean between the four groups by ANOVA and post-hoc Tukey HSD tests showed a statistically significant difference between all the groups (p⟨0.05). It was concluded that the copings fabricated using direct metal laser sintering technique exhibited best marginal accuracy and internal fit. Additive digital technologies such as direct metal laser sintering could be cost-effective for the clinician, minimize failures related to fit and increase longevity of teeth and prostheses. Copyright© 2017 Dennis Barber Ltd.

Structural contingency theory and individual differences: examination of external and internal person-team fit.

Science.gov (United States)

Hollenbeck, John R; Moon, Henry; Ellis, Aleksander P J; West, Bradley J; Ilgen, Daniel R; Sheppard, Lori; Porter, Christopher O L H; Wagner, John A

2002-06-01

This article develops and tests a structurally based, integrated theory of person-team fit. The theory developed is an extension of structural contingency theory and considers issues of external fit simultaneously with its examination of internal fit at the team level. Results from 80 teams working on an interdependent team task indicate that divisional structures demand high levels of cognitive ability on the part of teammembers. However, the advantages of high cognitive ability in divisional structures are neutralized when there is poor external fit between the structure and the environment. Instead, emotional stability becomes a critical factor among teammembers when a divisional structure is out of alignment with its environment. Individual differences seem to play little or no role in functional structures, regardless of the degree of external fit.

Marginal and internal fit of CAD-CAM-fabricated composite resin and ceramic crowns scanned by 2 intraoral cameras.

Science.gov (United States)

de Paula Silveira, Alessandra C; Chaves, Sacha B; Hilgert, Leandro A; Ribeiro, Ana Paula D

2017-03-01

The precision of fit of chairside computer-aided design and computer-aided manufacturing (CAD-CAM) complete crowns is affected by digital impression and restorative material. The purpose of this in vitro study was to evaluate by microcomputed tomography (μCT) the marginal and internal adaptation of composite resin and ceramic complete crowns fabricated with 2 different intraoral cameras and 2 restorative materials. Ten extracted human third molars received crown preparations. For each prepared molar, 2 digital impressions were made with different intraoral cameras of the CEREC system, Bluecam and Omnicam. Four groups were formed: LB (Lava Ultimate+Bluecam), EB (Emax+Bluecam), LO (Lava Ultimate+Omnicam), and EO (Emax+Omnicam). Before measuring the precision of fit, all crowns were stabilized with a silicone material. Each unit (crown + prepared tooth) was imaged with μCT, and marginal and internal discrepancies were analyzed. For the 2D analysis, 120 measurements were made of each crown for marginal adaptation, 20 for marginal discrepancy (MD), and 20 for absolute marginal discrepancy (AMD); and for internal adaptation, 40 for axial space (AS) and 40 for occlusal space (OS). After reconstructing the 3D images, the average internal space (AIS) was calculated by dividing the total volume of the internal space by the contact surface. Data were analyzed with 2-way ANOVA and quantile regression. Regarding marginal adaptation, no significant differences were observed among groups. For internal adaptation measured in the 2D evaluation, a significant difference was observed between LO and EO for the AS variable (Mann-Whitney test; POmnicam, and composite resin crowns showed less discrepancy than did ceramic crowns. The marginal adaptations assessed in all groups showed values within the clinically accepted range. Moreover, the composite resin blocks associated with the Bluecam intraoral camera demonstrated the best results for AIS compared with those of the other groups

Fitness for Work Evaluation of Firefighters in Tehran

Directory of Open Access Journals (Sweden)

Ramin Mehrdad

2013-04-01

Full Text Available Firefighting is extremely strenuous and physically demanding work and involves ability to cope with emergency life-or-death situations. Because of the high physical demands of firefighting, successful job performance and minimizing of morbidity and mortality depends on fitness for duty. The firefighting department of Tehran does not perform periodic medical assessment for firefighters. The aim of this study was to evaluate medical fitness among firefighters in Tehran. In this cross sectional study we examined 147 firefighters. Medical and occupational history obtained by interview, then we performed physical examination, blood tests, ECG, spirometry and audiometry. Then results compared with guidelines for firefighters in the USA, Australia and the United Kingdom. Seven percent of our participants had a kind of pulmonary dysfunction and 25% had some degrees of hearing loss. A considerable percent of them had modifiable coronary heart disease risk factors. Thirteen participitants were unfit for this job that among them; ten firefighters were unfit based on vision capability, one case due to hypertention and two cases because of pulmonary dysfunction. Because of hazardouse nature of firefighting; preplacement, periodic medical evaluations and assesment of fitness for firefighters in Iran is highly recommended. Establishment of fitness criteria for firefighters in Iran is necessery to perform assigned functions safely.

Comparison of fit accuracy and torque maintenance of zirconia and titanium abutments for internal tri-channel and external-hex implant connections.

Science.gov (United States)

Siadat, Hakimeh; Beyabanaki, Elaheh; Mousavi, Niloufar; Alikhasi, Marzieh

2017-08-01

This in vitro study aimed to evaluate the effect of implant connection design (external vs. internal) on the fit discrepancy and torque loss of zirconia and titanium abutments. Two regular platform dental implants, one with external connection (Brånemark, Nobel Biocare AB) and the other with internal connection (Noble Replace, Nobel Biocare AB), were selected. Seven titanium and seven customized zirconia abutments were used for each connection design. Measurements of geometry, marginal discrepancy, and rotational freedom were done using video measuring machine. To measure the torque loss, each abutment was torqued to 35 Ncm and then opened by means of a digital torque wrench. Data were analyzed with two-way ANOVA and t-test at α=0.05 of significance. There were significant differences in the geometrical measurements and rotational freedom between abutments of two connection groups ( P internal and external connection implants in terms of rotational freedom ( P internal abutments but also customized external abutments did not have the exact geometry of prefabricated abutments ( P internal connection showed less rotational freedom. However, better marginal fit was observed in externally connected abutments. Also, customized abutments with either connection could not duplicate the exact geometry of their corresponding prefabricated abutment. However, neither abutment connection nor material affected torque loss values.

Real-time patient-specific finite element analysis of internal stresses in the soft tissues of a residual limb: a new tool for prosthetic fitting.

Science.gov (United States)

Portnoy, S; Yarnitzky, G; Yizhar, Z; Kristal, A; Oppenheim, U; Siev-Ner, I; Gefen, A

2007-01-01

Fitting of a prosthetic socket is a critical stage in the process of rehabilitation of a trans-tibial amputation (TTA) patient, since a misfit may cause pressure ulcers or a deep tissue injury (DTI: necrosis of the muscle flap under intact skin) in the residual limb. To date, prosthetic fitting typically depends on the subjective skills of the prosthetist, and is not supported by biomedical instrumentation that allows evaluation of the quality of fitting. Specifically, no technology is presently available to provide real-time continuous information on the internal distribution of mechanical stresses in the residual limb during fitting of the prosthesis, or while using it and this severely limits patient evaluations. In this study, a simplified yet clinically oriented patient-specific finite element (FE) model of the residual limb was developed for real-time stress analysis. For this purpose we employed a custom-made FE code that continuously calculates internal stresses in the residual limb, based on boundary conditions acquired in real-time from force sensors, located at the limb-prosthesis interface. Validation of the modeling system was accomplished by means of a synthetic phantom of the residual limb, which allowed simultaneous measurements of interface pressures and internal stresses. Human studies were conducted subsequently in five TTA patients. The dimensions of bones and soft tissues were obtained from X-rays of the residual limb of each patient. An indentation test was performed in order to obtain the effective elastic modulus of the soft tissues of the residual limb. Seven force sensors were placed between the residual limb and the prosthetic liner, and subjects walked on a treadmill during analysis. Generally, stresses under the shinbones were approximately threefold higher than stresses at the soft tissues behind the bones. Usage of a thigh corset decreased the stresses in the residual limb during gait by approximately 80%. Also, the stresses

Methodology review: evaluating person fit

NARCIS (Netherlands)

Meijer, R.R.; Sijtsma, Klaas

2001-01-01

Person-fit methods based on classical test theory-and item response theory (IRT), and methods investigating particular types of response behavior on tests, are examined. Similarities and differences among person-fit methods and their advantages and disadvantages are discussed. Sound person-fit

PyCorrFit-generic data evaluation for fluorescence correlation spectroscopy.

Science.gov (United States)

Müller, Paul; Schwille, Petra; Weidemann, Thomas

2014-09-01

We present a graphical user interface (PyCorrFit) for the fitting of theoretical model functions to experimental data obtained by fluorescence correlation spectroscopy (FCS). The program supports many data file formats and features a set of tools specialized in FCS data evaluation. The Python source code is freely available for download from the PyCorrFit web page at http://pycorrfit.craban.de. We offer binaries for Ubuntu Linux, Mac OS X and Microsoft Windows. © The Author 2014. Published by Oxford University Press.

Effect of CNC-milling on the marginal and internal fit of dental ceramics: a pilot study.

Science.gov (United States)

Schaefer, Oliver; Kuepper, Harald; Thompson, Geoffrey A; Cachovan, Georg; Hefti, Arthur F; Guentsch, Arndt

2013-08-01

Machined restorations have been investigated for their preciseness before, while detailed information on the milling-step itself are lacking. Therefore, the aim of this laboratory study was to quantify the effect of a novel milling-procedure on the marginal and internal fit of ceramic restorations. An acrylic model of a lower left first molar was prepared to receive a ceramic partial crown and was duplicated by one step dual viscosity impressions. Gypsum casts were formed and laser-scanned to realize virtual datasets, before restorations were designed, exported (PRE) and machined from lithium disilicate blanks. Crowns were digitized by a structure-light-scanner to obtain post-milling-data (POST). PRE and POST were virtually superimposed on the reference tooth and subjected to computer-aided-inspection. Visual fit-discrepancies were displayed with colors, while root mean square deviations (RMSD) and degrees of similarity (DS) were computed and analysed by t-tests for paired samples (n=5, α=0.05). The milling procedure resulted in a small increase of the marginal and internal fit discrepancies (RMSD mean: 3μm and 6μm, respectively). RMSD differences were not statistically significant (p=0.495 and p=0.160 for marginal and internal fit, respectively). These results were supported by the DS data. The products of digital dental workflows are prone to imprecisions. However, the present findings suggest that differences between computer-aided designed and actually milled restorations are small, especially when compared to typical fit discrepancies observed clinically. Imprecisions introduced by digital design or production processes are small. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Cross-Cultural Adaptation of the Profile Fitness Mapping Neck Questionnaire to Brazilian Portuguese: Internal Consistency, Reliability, and Construct and Structural Validity.

Science.gov (United States)

Ferreira, Mariana Cândido; Björklund, Martin; Dach, Fabiola; Chaves, Thais Cristina

The purpose of this study was to adapt and evaluate the psychometric properties of the ProFitMap-neck to Brazilian Portuguese. The cross-cultural adaptation consisted of 5 stages, and 180 female patients with chronic neck pain participated in the study. A subsample (n = 30) answered the pretest, and another subsample (n = 100) answered the questionnaire a second time. Internal consistency, test-retest reliability, and construct validity (hypothesis testing and structural validity) were estimated. For construct validity, the scores of the questionnaire were correlated with the Neck Disability Index (NDI), and the Hospital Anxiety and Depression Scale (HADS), the Tampa Scale of Kinesiophobia (TSK), and the 36-item Short-Form Health Survey (SF-36). Internal consistency was determined by adequate Cronbach's α values (α > 0.70). Strong reliability was identified by high intraclass correlation coefficients (ICC > 0.75). Construct validity was identified by moderate and strong correlations of the Br-ProFitMap-neck with total NDI score (-0.56 50%, Kaiser-Meyer-Olkin index > 0.50, eigenvalue > 1, and factor loadings > 0.2. Br-ProFitMap-neck had adequate psychometric properties and can be used in clinical settings, as well as research, in patients with chronic neck pain. Copyright © 2017. Published by Elsevier Inc.

Pavement evaluation - an international perspective: Fit for purpose?

OpenAIRE

Wix, Richard

2014-01-01

Plenary Session 1 Moderated by Edgar de León Izeppi This presentation was held at the Pavement Evaluation 2014 Conference, which took place from September 15-18, 2014 in Blacksburg, Virginia. Presentation only

THE EFFECT OF PERSON-ORGANIZATION FIT ON JOB STRESSANDCONFLICT: AN APPLICATION ON EMPLOYEES OF BUSINESSESINDALAMAN INTERNATIONAL AIRPORT

Directory of Open Access Journals (Sweden)

Mehmet ULUTAŞ

2011-01-01

Full Text Available Person-organization fit, which is generally described as a degree of compatibilityor similarity between the person’s values and theorganization’s values, is one ofthe base factors required for an organization’s success. Organizations shouldaccomplish person-organization fit in their organizations by using employeeselection and hiring process which is congruence-based in cultural values or byapplying socialization tactics. We proposed findinga correlation in this studybetween person-organization fit and job stress andconflict. In this context, wehave reached some findings about person-organization fit and its outcomes byconducting a survey on employees of Dalaman International Airport. The findingsshowed us there is a statistically negative correlation between person-organization fit and job stress and conflict.

THE USE OF OFFSHORE JURISDICTIONS IN INTERNATIONAL FINANCIAL FITTINGS

Directory of Open Access Journals (Sweden)

DANIELA RADU

2012-05-01

Full Text Available Essential legal and financial Structures, sometimes complex, had until recently been small and medium entrepreneurs away from the use of offshore jurisdictions, but the constraints of increasingly heavy taxation of excessive in certain States, you push even those with limited resources to use in these jurisdictions to protect revenue. The purpose of this research is to analyze the offshore jurisdictions in order to determine the possibilities of useof their disadvantages in order to improve measures to combat tax evasion, as well as for the use of their advantages in order to reduce illegal migration and regular employment of capital through the analysis of specific cases of the use of offshore jurisdictions – Case Frabklin Jurado, The Bank of Commerce and Credit InternationalAmerican Express Bank International. Scientific novelty and originality of the investigation consists of:-the identification on the basis of international practice, some offshore jurisdictions specific items in order to reflect their fiscal policies (trade and investment, etc.-analysis of cases of the use of offshore jurisdictions in international financial fittings (such as the Bank of Credit and Commerce International; Franklin Jurado; American Express Bank International,-identification of the impact paradisurilor tax and offshore financial centres of the world economy– revealing secret financial transactions carried out within the framework of ofssore, research instruments jurisdictions and management techniques of cadrulacestor tax jurisdictions.It is interesting to be seen through the prism of analysis of economic-fiscal financiare if a competition is beneficial or not for the welfare of States and to what extent this competition will have a say in future developments and tax paradisurilor finanaciare offshore centres. In conclusion, I appreciate that in order to survive successfully in the global economy of the future, offshoreJurisdictions should promote a

Comparison of fit accuracy and torque maintenance of zirconia and titanium abutments for internal tri-channel and external-hex implant connections

Science.gov (United States)

Siadat, Hakimeh; Beyabanaki, Elaheh; Mousavi, Niloufar

2017-01-01

PURPOSE This in vitro study aimed to evaluate the effect of implant connection design (external vs. internal) on the fit discrepancy and torque loss of zirconia and titanium abutments. MATERIALS AND METHODS Two regular platform dental implants, one with external connection (Brånemark, Nobel Biocare AB) and the other with internal connection (Noble Replace, Nobel Biocare AB), were selected. Seven titanium and seven customized zirconia abutments were used for each connection design. Measurements of geometry, marginal discrepancy, and rotational freedom were done using video measuring machine. To measure the torque loss, each abutment was torqued to 35 Ncm and then opened by means of a digital torque wrench. Data were analyzed with two-way ANOVA and t-test at α=0.05 of significance. RESULTS There were significant differences in the geometrical measurements and rotational freedom between abutments of two connection groups (Pabutments of internal and external connection implants in terms of rotational freedom (Pabutments but also customized external abutments did not have the exact geometry of prefabricated abutments (Pabutment material (P=.38) affected torque loss. CONCLUSION Abutments with internal connection showed less rotational freedom. However, better marginal fit was observed in externally connected abutments. Also, customized abutments with either connection could not duplicate the exact geometry of their corresponding prefabricated abutment. However, neither abutment connection nor material affected torque loss values. PMID:28874994

Evaluation of Mechanical Properties and Marginal Fit of Crowns Fabricated Using Commercially Pure Titanium and FUS-Invest

Directory of Open Access Journals (Sweden)

Jinshuang Wu

2017-01-01

Full Text Available This study investigated the mechanical properties and single crown accuracy of the tailor-made Fourth University Stomatology investment (FUS-invest for casting titanium. Background. Current investment for casting titanium is not optimal for obtaining high-quality castings, and the commercially available titanium investment is costly. Methods. Titanium specimens were cast using the tailor-made FUS-invest. The mechanical properties were tested using a universal testing machine. Fractured castings were characterized by energy-dispersive spectroscopy. 19 titanium crowns were produced using FUS-invest and another 19 by Symbion. The accuracy of crowns was evaluated. Results. The mechanical properties of the titanium cast by FUS-invest were elastic modulus 125.6 ± 8.8 GPa, yield strength 567.5 ± 11.1 MPa, tensile strength 671.2 ± 15.6 MPa, and elongation 4.6 ± 0.2%. For marginal fit, no significant difference (P>0.05 was found at four marker points of each group. For internal fit, no significant difference (P>0.05 was found between two groups, whereas significant difference (P<0.01 was found at different mark point of each group. Conclusions. The mechanical properties of titanium casted using FUS-invest fulfilled the ISO 9693 criteria. The marginal and internal fit of the titanium crowns using either the FUS-invest or Symbion were similar.

In vitro Evaluation of the Marginal Fit and Internal Adaptation of Zirconia and Lithium Disilicate Single Crowns: Micro-CT Comparison Between Different Manufacturing Procedures.

Science.gov (United States)

Riccitiello, Francesco; Amato, Massimo; Leone, Renato; Spagnuolo, Gianrico; Sorrentino, Roberto

2018-01-01

Prosthetic precision can be affected by several variables, such as restorative materials, manufacturing procedures, framework design, cementation techniques and aging. Marginal adaptation is critical for long-term longevity and clinical success of dental restorations. Marginal misfit may lead to cement exposure to oral fluids, resulting in microleakage and cement dissolution. As a consequence, marginal discrepancies enhance percolation of bacteria, food and oral debris, potentially causing secondary caries, endodontic inflammation and periodontal disease. The aim of the present in vitro study was to evaluate the marginal and internal adaptation of zirconia and lithium disilicate single crowns, produced with different manufacturing procedures. Forty-five intact human maxillary premolars were prepared for single crowns by means of standardized preparations. All-ceramic crowns were fabricated with either CAD-CAM or heat-pressing procedures (CAD-CAM zirconia, CAD-CAM lithium disilicate, heat-pressed lithium disilicate) and cemented onto the teeth with a universal resin cement. Non-destructive micro-CT scanning was used to achieve the marginal and internal gaps in the coronal and sagittal planes; then, precision of fit measurements were calculated in a dedicated software and the results were statistically analyzed. The heat-pressed lithium disilicate crowns were significantly less accurate at the prosthetic margins (p0.05); nevertheless CAD-CAM zirconia copings presented the best marginal fit among the experimental groups. As to the thickness of the cement layer, reduced amounts of luting agent were noticed at the finishing line, whereas a thicker layer was reported at the occlusal level. Within the limitations of the present in vitro investigation, the following conclusions can be drawn: the recorded marginal gaps were within the clinical acceptability irrespective of both the restorative material and the manufacturing procedures; the CAD-CAM processing techniques for

Comparison the Marginal and Internal Fit of Metal Copings Cast from Wax Patterns Fabricated by CAD/CAM and Conventional Wax up Techniques

Science.gov (United States)

Vojdani, M; Torabi, K; Farjood, E; Khaledi, AAR

2013-01-01

Statement of Problem: Metal-ceramic crowns are most commonly used as the complete coverage restorations in clinical daily use. Disadvantages of conventional hand-made wax-patterns introduce some alternative ways by means of CAD/CAM technologies. Purpose: This study compares the marginal and internal fit of copings cast from CAD/CAM and conventional fabricated wax-patterns. Materials and Method: Twenty-four standardized brass dies were prepared and randomly divided into 2 groups according to the wax-patterns fabrication method (CAD/CAM technique and conventional method) (n=12). All the wax-patterns were fabricated in a standard fashion by means of contour, thickness and internal relief (M1-M12: representative of CAD/CAM group, C1-C12: representative of conventional group). CAD/CAM milling machine (Cori TEC 340i; imes-icore GmbH, Eiterfeld, Germany) was used to fabricate the CAD/CAM group wax-patterns. The copings cast from 24 wax-patterns were cemented to the corresponding dies. For all the coping-die assemblies cross-sectional technique was used to evaluate the marginal and internal fit at 15 points. The Student’s t- test was used for statistical analysis (α=0.05). Results: The overall mean (SD) for absolute marginal discrepancy (AMD) was 254.46 (25.10) um for CAD/CAM group and 88.08(10.67) um for conventional group (control). The overall mean of internal gap total (IGT) was 110.77(5.92) um for CAD/CAM group and 76.90 (10.17) um for conventional group. The Student’s t-test revealed significant differences between 2 groups. Marginal and internal gaps were found to be significantly higher at all measured areas in CAD/CAM group than conventional group (pmarginal and internal fit than CAD/CAM (machine-milled) technique. All the factors for 2 groups were standardized except wax pattern fabrication technique, therefore, only the conventional group results in copings with clinically acceptable margins of less than 120um. PMID:24724133

Using the Bayes Factors to Evaluate Person Fit in the Item Response Theory

Science.gov (United States)

Pan, Tianshu; Yin, Yue

2017-01-01

In this article, we propose using the Bayes factors (BF) to evaluate person fit in item response theory models under the framework of Bayesian evaluation of an informative diagnostic hypothesis. We first discuss the theoretical foundation for this application and how to analyze person fit using BF. To demonstrate the feasibility of this approach,…

Internal Evaluation, Historically Speaking

Science.gov (United States)

Mathison, Sandra

2011-01-01

The author analyzes the growth and nature of internal evaluation from the 1960s to the present and suggests that internal evaluation has been on the increase because of its perceived importance. Although the 1960s were characterized by a rich intellectual development of evaluation theory and practice, the fiscal conservatism of the 1980s ushered…

A fitness-for-purpose evaluation of fracture critical electro-slag welds.

Science.gov (United States)

2009-03-01

A fitness-for-purpose evaluation was performed on the electro-slag flange welds of the West Fremont bridge approach : superstructures, per the request of FHWA. This evaluation required gathering knowledge of the material properties, fabrication : def...

Will Nintendo "Wii Fit" Get You Fit? An Evaluation of the Energy Expenditure from Active-Play Videogames.

Science.gov (United States)

Xian, Ying; Kakinami, Lisa; Peterson, Eric D; Mustian, Karen M; Fernandez, I Diana

2014-04-01

This study aimed to determine whether Nintendo(®) (Redmond, WA) "Wii Fit™" games can help individuals meet physical activity recommendations. Thirty young healthy volunteers were recruited for this randomized crossover study to evaluate the energy expenditure associated with (1) a 30-minute "Wii Fit Free Run," (2) three 10-minute bouts of "Wii Fit" aerobic games ("Rhythm Boxing," "Super Hula Hoop," and "Advanced Steps"), and (3) 30-minute treadmill running/walking. Energy expenditure was measured by indirect calorimetry using breath-by-breath analyses of O2 consumption and CO2 production. The "Wii Fit" conditions produced a moderate exercise intensity (5.0, 4.1, 3.9, and 3.8 metabolic equivalents [METs] in "Free Run," "Rhythm Boxing," "Super Hula Hoop," and "Advanced Steps"), whereas the treadmill running/walking produced a vigorous exercise intensity (METs=8.0). Based on federal guidelines, an individual could achieve the minimum weekly goal of 500 MET-minutes by playing selected "Wii Fit" aerobics games for 20-26 minutes a day, 5 days a week. Although not as vigorous as the treadmill, active-play videogames such as "Wii Fit" may provide an alternative way to encourage exercise and increase adoption and adherence to the physical activity guidelines.

Uncertainty evaluation for ordinary least-square fitting with arbitrary order polynomial in joule balance method

International Nuclear Information System (INIS)

You, Qiang; Xu, JinXin; Wang, Gang; Zhang, Zhonghua

2016-01-01

The ordinary least-square fitting with polynomial is used in both the dynamic phase of the watt balance method and the weighting phase of joule balance method but few researches have been conducted to evaluate the uncertainty of the fitting data in the electrical balance methods. In this paper, a matrix-calculation method for evaluating the uncertainty of the polynomial fitting data is derived and the properties of this method are studied by simulation. Based on this, another two derived methods are proposed. One is used to find the optimal fitting order for the watt or joule balance methods. Accuracy and effective factors of this method are experimented with simulations. The other is used to evaluate the uncertainty of the integral of the fitting data for joule balance, which is demonstrated with an experiment from the NIM-1 joule balance. (paper)

Evaluation of fit and efficiency of CAD/CAM fabricated all-ceramic restorations based on direct and indirect digitalization: a double-blinded, randomized clinical trial.

Science.gov (United States)

Ahrberg, Danush; Lauer, Hans Christoph; Ahrberg, Martin; Weigl, Paul

2016-03-01

The aim of this clinical trial was to evaluate the marginal and internal fit of CAD/CAM fabricated zirconia crowns and three-unit fixed dental prostheses (FDPs) resulting from direct versus indirect digitalization. The efficiency of both methods was analyzed. In 25 patients, 17 single crowns and eight three-unit FDPs were fabricated with all-ceramic zirconia using CAD/CAM technology. Each patient underwent two different impression methods; a computer-aided impression with Lava C.O.S. (CAI) and a conventional polyether impression with Impregum pent soft (CI). The working time for each group was recorded. Before insertion, the marginal and internal fit was recorded using silicone replicas of the frameworks. Each sample was cut into four sections and evaluated at four sites (marginal gap, mid-axial wall, axio-occlusal transition, centro-occlusal site) under ×64 magnification. The Mann-Whitney U test was used to detect significant differences between the two groups in terms of marginal and internal fit (α = 0.05). The mean for the marginal gap was 61.08 μm (±24.77 μm) for CAI compared with 70.40 μm (±28.87 μm) for CI, which was a statistically significant difference. The other mean values for CAI and CI, respectively, were as follows in micrometers (± standard deviation): 88.27 (±41.49) and 92.13 (±49.87) at the mid-axial wall; 144.78 (±46.23) and 155.60 (±55.77) at the axio-occlusal transition; and 155.57 (49.85) and 171.51 (±60.98) at the centro-occlusal site. The CAI group showed significantly lower values of internal fit at the centro-occlusal site. A quadrant scan with a computer-aided impression was 5 min 6 s more time efficient when compared with a conventional impression, and a full-arch scan was 1 min 34 s more efficient. Although both direct and indirect digitalization facilitate the fabrication of single crowns and three-unit FDPs with clinically acceptable marginal fit, a significantly better marginal fit was noted with direct

Marginal and internal fit of cobalt-chromium fixed dental prostheses generated from digital and conventional impressions.

Science.gov (United States)

Svanborg, Per; Skjerven, Henrik; Carlsson, Pablo; Eliasson, Alf; Karlsson, Stig; Ortorp, Anders

2014-01-01

Objectives. Digital impressions are increasingly used and have the potential to avoid the problem of inaccurate impressions. Only a few studies to verify the accuracy of digital impressions have been performed. The purpose of this study was to compare the marginal and internal fit of 3-unit tooth supported fixed dental prostheses (FDPs) fabricated from digital and conventional impressions. Methods. Ten FDPs were produced from digital impressions using the iTero system and 10 FDPs were produced using vinyl polysiloxane (VPS) impression material. A triple-scan protocol and CAD software were used for measuring and calculating discrepancies of the FDPs at 3 standard areas: mean internal discrepancy, absolute marginal gap, and cervical area discrepancy. The Mann-Whitney U test was used for analyzing the results. Results. For conventional and digital impressions, respectively, FDPs had an absolute marginal gap of 147  μ m and 142  μ m, cervical area discrepancy of 69  μ m and 44  μ m, and mean internal discrepancy of 117  μ m and 93  μ m. The differences were statistically significant in the cervical and internal areas (P digital impression technique is more exact and can generate 3-unit FDPs with a significantly closer fit compared to the VPS technique.

Marginal and internal fit of cobalt-chromium copings fabricated using the conventional and the direct metal laser sintering techniques: A comparative in vitro study.

Science.gov (United States)

Ullattuthodi, Sujana; Cherian, Kandathil Phillip; Anandkumar, R; Nambiar, M Sreedevi

2017-01-01

This in vitro study seeks to evaluate and compare the marginal and internal fit of cobalt-chromium copings fabricated using the conventional and direct metal laser sintering (DMLS) techniques. A master model of a prepared molar tooth was made using cobalt-chromium alloy. Silicone impression of the master model was made and thirty standardized working models were then produced; twenty working models for conventional lost-wax technique and ten working models for DMLS technique. A total of twenty metal copings were fabricated using two different production techniques: conventional lost-wax method and DMLS; ten samples in each group. The conventional and DMLS copings were cemented to the working models using glass ionomer cement. Marginal gap of the copings were measured at predetermined four points. The die with the cemented copings are standardized-sectioned with a heavy duty lathe. Then, each sectioned samples were analyzed for the internal gap between the die and the metal coping using a metallurgical microscope. Digital photographs were taken at ×50 magnification and analyzed using measurement software. Statistical analysis was done by unpaired t -test and analysis of variance (ANOVA). The results of this study reveal that no significant difference was present in the marginal gap of conventional and DMLS copings ( P > 0.05) by means of ANOVA. The mean values of internal gap of DMLS copings were significantly greater than that of conventional copings ( P < 0.05). Within the limitations of this in vitro study, it was concluded that the internal fit of conventional copings was superior to that of the DMLS copings. Marginal fit of the copings fabricated by two different techniques had no significant difference.

Effect of the Shrink Fit and Mechanical Tolerance on Reactor Coolant Pump Flywheel Integrity Evaluation

Energy Technology Data Exchange (ETDEWEB)

Kim, Donghak [Korea KHNP Central Research Institute, Daejeon (Korea, Republic of)

2015-10-15

Reactor coolant pump (RCP) flywheel should satisfy the RCP flywheel integrity criteria of the US NRC standard review plan (SRP) 5.4.1.1 and regulatory guide (RG) 1.14. Shrink-fit and rotational stresses should be calculated to evaluate the integrity. In this paper the effects of the shrink fit and mechanical tolerance on the RCP flywheel integrity evaluation are studied. The shrink fit should be determined by the joint release speed and the stresses in the flywheel will be increased by the shrink fit. The stress at the interface between the hub and the outer wheel shows the highest value. The effect of the mechanical tolerance should be considered for the stress evaluation. And the effect of the mechanical tolerance should be not considered to determine the joint release speed.

Effect of the Shrink Fit and Mechanical Tolerance on Reactor Coolant Pump Flywheel Integrity Evaluation

International Nuclear Information System (INIS)

Kim, Donghak

2015-01-01

Reactor coolant pump (RCP) flywheel should satisfy the RCP flywheel integrity criteria of the US NRC standard review plan (SRP) 5.4.1.1 and regulatory guide (RG) 1.14. Shrink-fit and rotational stresses should be calculated to evaluate the integrity. In this paper the effects of the shrink fit and mechanical tolerance on the RCP flywheel integrity evaluation are studied. The shrink fit should be determined by the joint release speed and the stresses in the flywheel will be increased by the shrink fit. The stress at the interface between the hub and the outer wheel shows the highest value. The effect of the mechanical tolerance should be considered for the stress evaluation. And the effect of the mechanical tolerance should be not considered to determine the joint release speed

Functional Fit Evaluation to Determine Optimal Ease Requirements in Canadian Forces Chemical Protective Gloves

National Research Council Canada - National Science Library

Tremblay-Lutter, Julie

1995-01-01

A functional fit evaluation of the Canadian Forces (CF) chemical protective lightweight glove was undertaken in order to quantify the amount of ease required within the glove for optimal functional fit...

Marginal and Internal Fit of Cobalt-Chromium Fixed Dental Prostheses Generated from Digital and Conventional Impressions

Directory of Open Access Journals (Sweden)

Per Svanborg

2014-01-01

Full Text Available Objectives. Digital impressions are increasingly used and have the potential to avoid the problem of inaccurate impressions. Only a few studies to verify the accuracy of digital impressions have been performed. The purpose of this study was to compare the marginal and internal fit of 3-unit tooth supported fixed dental prostheses (FDPs fabricated from digital and conventional impressions. Methods. Ten FDPs were produced from digital impressions using the iTero system and 10 FDPs were produced using vinyl polysiloxane (VPS impression material. A triple-scan protocol and CAD software were used for measuring and calculating discrepancies of the FDPs at 3 standard areas: mean internal discrepancy, absolute marginal gap, and cervical area discrepancy. The Mann-Whitney U test was used for analyzing the results. Results. For conventional and digital impressions, respectively, FDPs had an absolute marginal gap of 147 μm and 142 μm, cervical area discrepancy of 69 μm and 44 μm, and mean internal discrepancy of 117 μm and 93 μm. The differences were statistically significant in the cervical and internal areas (P<0.001. Significance. The results indicated that the digital impression technique is more exact and can generate 3-unit FDPs with a significantly closer fit compared to the VPS technique.

Steam generator tube fitness-for-service guidelines

International Nuclear Information System (INIS)

Gorman, J.A.; Harris, J.E.; Lowenstein, D.B.

1995-07-01

The objectives of this project were to characterize defect mechanisms which could affect the integrity of steam generator tubes, to review and critique state-of-the-art Canadian and international steam generator tube fitness-for-service criteria and guidelines, and to obtain recommendations for criteria that could be used to assess fitness-for service guidelines for steam generator tubes containing defects in Canadian power plant service. Degradation mechanisms, that could affect CANDU steam generator tubes in Canada, have been characterized. The design standards and safety criteria that apply to steam generator tubing in nuclear power plant service in Canada and in Belgium, France, Japan, Spain, Sweden, and the USA have been reviewed and described. The fitness-for-service guidelines used for a variety of specific defect types in Canada and internationally have been evaluated and described in detail in order to highlight the considerations involved in developing such defect specific guidelines. Existing procedures for defect assessment and disposition have been identified, including inspection and examination practices. The approaches used in Canada and in Belgium, France, Japan, Spain, Sweden, and the USA for fitness-for-service guidelines were compared and contrasted for a variety of defect mechanisms. The strengths and weaknesses of the various approaches have been assessed. The report presents recommendations on approaches that may be adopted in the development of fitness-for-service guidelines for use in the dispositioning of steam generator tubing defects in Canada. (author). 175 refs., 2 tabs., 28 figs

Construct validity and test-retest reliability of the International Fitness Scale (IFIS) in Colombian children and adolescents aged 9-17.9 years: the FUPRECOL study.

Science.gov (United States)

Ramírez-Vélez, Robinson; Cruz-Salazar, Sandra Milena; Martínez, Myriam; Cadore, Eduardo L; Alonso-Martinez, Alicia M; Correa-Bautista, Jorge E; Izquierdo, Mikel; Ortega, Francisco B; García-Hermoso, Antonio

2017-01-01

There is a lack of instruments and studies written in Spanish evaluating physical fitness, impeding the determination of the current status of this important health indicator in the Latin population, especially in Colombia. The aim of the study was two-fold: to examine the validity of the International Fitness Scale (IFIS) with a population-based sample of schoolchildren from Bogota, Colombia and to examine the reliability of the IFIS with children and adolescents from Engativa, Colombia. The sample comprised 1,873 Colombian youths (54.5% girls) aged 9-17.9 years. We measured their adiposity markers (waist-to-height ratio, skinfold thickness, percentage of body fat and body mass index), blood pressure, lipids profile, fasting glucose, and physical fitness level (self-reported and measured). A validated cardiometabolic risk index score was also used. An age- and sex-matched subsample of 229 schoolchildren who were not originally included in the sample completed the IFIS twice for reliability purposes. Our data suggest that both measured and self-reported overall physical fitness levels were inversely associated with percentage of body fat indicators and the cardiometabolic risk index score. Overall, schoolchildren who self-reported "good" or "very good" fitness had better measured fitness levels than those who reported "very poor/poor" fitness (all p  studies with Latin schoolchildren from Colombia.

Comparison of marginal and internal adaptation of copings fabricated from three different fabrication techniques: An in vitro study

Directory of Open Access Journals (Sweden)

Aman Arora

2018-01-01

Conclusion: Marginal and internal discrepancies of all the three casting techniques were within clinically acceptable values. Marginal fit of DMLS was superior as compared to other two techniques, whereas when internal fit was evaluated, conventional technique showed the best internal fit.

Geothermal FIT Design: International Experience and U.S. Considerations

Energy Technology Data Exchange (ETDEWEB)

Rickerson, W.; Gifford, J.; Grace, R.; Cory, K.

2012-08-01

Developing power plants is a risky endeavor, whether conventional or renewable generation. Feed-in tariff (FIT) policies can be designed to address some of these risks, and their design can be tailored to geothermal electric plant development. Geothermal projects face risks similar to other generation project development, including finding buyers for power, ensuring adequate transmission capacity, competing to supply electricity and/or renewable energy certificates (RECs), securing reliable revenue streams, navigating the legal issues related to project development, and reacting to changes in existing regulations or incentives. Although FITs have not been created specifically for geothermal in the United States to date, a variety of FIT design options could reduce geothermal power plant development risks and are explored. This analysis focuses on the design of FIT incentive policies for geothermal electric projects and how FITs can be used to reduce risks (excluding drilling unproductive exploratory wells).

Older driver fitness-to-drive evaluation using naturalistic driving data.

Science.gov (United States)

Guo, Feng; Fang, Youjia; Antin, Jonathan F

2015-09-01

As our driving population continues to age, it is becoming increasingly important to find a small set of easily administered fitness metrics that can meaningfully and reliably identify at-risk seniors requiring more in-depth evaluation of their driving skills and weaknesses. Sixty driver assessment metrics related to fitness-to-drive were examined for 20 seniors who were followed for a year using the naturalistic driving paradigm. Principal component analysis and negative binomial regression modeling approaches were used to develop parsimonious models relating the most highly predictive of the driver assessment metrics to the safety-related outcomes observed in the naturalistic driving data. This study provides important confirmation using naturalistic driving methods of the relationship between contrast sensitivity and crash-related events. The results of this study provide crucial information on the continuing journey to identify metrics and protocols that could be applied to determine seniors' fitness to drive. Published by Elsevier Ltd.

The FitTrack Index as fitness indicator: A pilot study | van Rensburg ...

African Journals Online (AJOL)

Conclusions: These results suggest that the web-based FitTrack Index may be considered an appropriate tool to evaluate exercise capacity and cardiovascular fitness in healthy individuals following an aerobic training programme. Keywords: Aerobic fitness, Exercise ability, Recreational fitness, Cardiovascular fitness, ...

Evaluating Suit Fit Using Performance Degradation

Science.gov (United States)

Margerum, Sarah E.; Cowley, Matthew; Harvill, Lauren; Benson, Elizabeth; Rajulu, Sudhakar

2011-01-01

The Mark III suit has multiple sizes of suit components (arm, leg, and gloves) as well as sizing inserts to tailor the fit of the suit to an individual. This study sought to determine a way to identify the point an ideal suit fit transforms into a bad fit and how to quantify this breakdown using mobility-based physical performance data. This study examined the changes in human physical performance via degradation of the elbow and wrist range of motion of the planetary suit prototype (Mark III) with respect to changes in sizing and as well as how to apply that knowledge to suit sizing options and improvements in suit fit. The methods implemented in this study focused on changes in elbow and wrist mobility due to incremental suit sizing modifications. This incremental sizing was within a range that included both optimum and poor fit. Suited range of motion data was collected using a motion analysis system for nine isolated and functional tasks encompassing the elbow and wrist joints. A total of four subjects were tested with motions involving both arms simultaneously as well as the right arm only. The results were then compared across sizing configurations. The results of this study indicate that range of motion may be used as a viable parameter to quantify at what stage suit sizing causes a detriment in performance; however the human performance decrement appeared to be based on the interaction of multiple joints along a limb, not a single joint angle. The study was able to identify a preliminary method to quantify the impact of size on performance and to develop a means to gauge tolerances around optimal size. More work is needed to improve the assessment of optimal fit and to compensate for multiple joint interactions.

Effect of combined loading due to bending and internal pressure on pipe flaw evaluation criteria

International Nuclear Information System (INIS)

Miura, Naoki; Sakai, Shinsuke

2006-01-01

Considering a rational maintenance rule of Light Water Reactor piping, reliable flaw evaluation criteria are essential to determine how a detected flaw is detrimental to continuous plant operation. Ductile fracture is one of the dominant failure modes to be considered for carbon steel piping, and can be analyzed by the elastic-plastic fracture mechanics. Some analytical efforts have been provided as flaw evaluation criteria using load correction factors such like the Z-factors in the JSME codes on fitness-for-service for nuclear power plants or the ASME boiler and pressure vessel code section XI. The present correction factors were conventionally determined taken conservatism and simplicity into account, however, the effect of internal pressure which would be an important factor under an actual plant condition was not adequately considered. Recently, a J-estimation scheme, 'LBB. ENGC' for ductile fracture analysis of circumferentially through-wall-cracked pipes subjected combined loading was newly developed to have a better prediction with more realistic manner. This method is explicitly incorporated the contribution of both bending and tension due to internal pressure by means of the scheme compatible with an arbitrary combined loading history. In this paper, the effect of internal pressure on the flaw evaluation criteria was investigated using the new J-estimation scheme. A correction factor based on the new J-estimation scheme was compared with the present correction factors, and the predictability of the current flaw evaluation criteria was quantitatively evaluated in consideration of internal pressure. (author)

Fit of interim crowns fabricated using photopolymer-jetting 3D printing.

Science.gov (United States)

Mai, Hang-Nga; Lee, Kyu-Bok; Lee, Du-Hyeong

2017-08-01

The fit of interim crowns fabricated using 3-dimensional (3D) printing is unknown. The purpose of this in vitro study was to evaluate the fit of interim crowns fabricated using photopolymer-jetting 3D printing and to compare it with that of milling and compression molding methods. Twelve study models were fabricated by making an impression of a metal master model of the mandibular first molar. On each study model, interim crowns (N=36) were fabricated using compression molding (molding group, n=12), milling (milling group, n=12), and 3D polymer-jetting methods. The crowns were prepared as follows: molding group, overimpression technique; milling group, a 5-axis dental milling machine; and polymer-jetting group using a 3D printer. The fit of interim crowns was evaluated in the proximal, marginal, internal axial, and internal occlusal regions by using the image-superimposition and silicone-replica techniques. The Mann-Whitney U test and Kruskal-Wallis tests were used to compare the results among groups (α=.05). Compared with the molding group, the milling and polymer-jetting groups showed more accurate results in the proximal and marginal regions (P3D printing significantly enhanced the fit of interim crowns, particularly in the occlusal region. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

48 CFR 752.7033 - Physical fitness.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Physical fitness. 752.7033 Section 752.7033 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT CLAUSES AND... fitness. For use in all USAID contracts involving performance overseas. Physical Fitness (JUL 1997) (The...

An evaluation of marginal fit of three-unit fixed dental prostheses fabricated by direct metal laser sintering system.

Science.gov (United States)

Kim, Ki-Baek; Kim, Woong-Chul; Kim, Hae-Young; Kim, Ji-Hwan

2013-07-01

This in vitro study aimed to evaluate and compare marginal fit of three-unit fixed dental prostheses (FDPs) fabricated using a newly developed direct metal laser sintering (DMLS) system with that of three-unit FDPs by a conventional lost wax technique (LW) method. Ten cobalt-chromium alloy three-unit FDPs using DMLS system and another ten nickel-chromium alloy FDPs using LW method were fabricated. Marginal fit was examined using a light-body silicone. After setting, the silicon film was cut into four parts and the thickness of silicon layer was measured at 160× magnification using a digital microscope to measure absolute marginal discrepancy (AMD), marginal gap (MG) and internal gap (IG). A repeated measure ANOVA for statistical analysis was performed using the SPSS statistical package version 12.0 (α=0.05). The mean values of AMD, MG, and IG were significantly larger in the DMLS group than in the LW group (p0.05). The marginal fit of the DMLS system appeared significantly inferior compared to that of the conventional LW method and slightly larger than the acceptable range. For clinical application further improvement of DMLS system may be required. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Physical Fitness Assessment.

Science.gov (United States)

Valdes, Alice

This document presents baseline data on physical fitness that provides an outline for assessing the physical fitness of students. It consists of 4 tasks and a 13-item questionnaire on fitness-related behaviors. The fitness test evaluates cardiorespiratory endurance by a steady state jog; muscular strength and endurance with a two-minute bent-knee…

Cross-cultural validation of the Prosthesis Evaluation Questionnaire in vascular amputees fitted with prostheses in Spain.

Science.gov (United States)

Benavent, Jose Vicente; Igual, Celedonia; Mora, Enrique; Antonio, Rosa; Tenias, Jose Maria

2016-12-01

The lack of specific prosthetic-related outcome instruments for Spanish amputees must be addressed. To elaborate a culturally equivalent version of the Prosthesis Evaluation Questionnaire in the Spanish language. Cross-cultural questionnaire validation. Two-step process for cultural adaptation: forward and backward translations of English original and Spanish translated versions; assessment of both construct and criterion validity and reliability in a group of vascular amputees. A total of 61 patients were recruited, 44 men (72.1%) and 17 women (27.9%), with a median age of 71.1 years (standard deviation: 7.7 years; range: 51-87 years). In the Prosthesis Evaluation Questionnaire-Spanish, the lowest scores were for gait and frustration, and the highest scores were for noise and stump health. Internal consistency of the questionnaire was acceptable (>0.70) for four of the scales used in the Prosthesis Evaluation Questionnaire but poor (<0.50) for the scales relating to appearance and stump health. Correlations with the quality-of-life levels as measured by the Short Form-36 were positive and mostly significant. Prosthesis Evaluation Questionnaire-Spanish could assess the quality of life in patients who have undergone vascular amputations and then been fitted with a prosthetic limb. The questionnaire shows adequate criteria validity when compared with other instruments for measuring quality of life. The Prosthesis Evaluation Questionnaire-Spanish could be a valid and reliable instrument for assessing adaptation to prostheses in vascular amputees. The questionnaire adds information relevant to the patient and the physician and may identify cases with poor expected adaptation to the prosthesis. © The International Society for Prosthetics and Orthotics 2015.

Elevation data fitting and precision analysis of Google Earth in road survey

Science.gov (United States)

Wei, Haibin; Luan, Xiaohan; Li, Hanchao; Jia, Jiangkun; Chen, Zhao; Han, Leilei

2018-05-01

Objective: In order to improve efficiency of road survey and save manpower and material resources, this paper intends to apply Google Earth to the feasibility study stage of road survey and design. Limited by the problem that Google Earth elevation data lacks precision, this paper is focused on finding several different fitting or difference methods to improve the data precision, in order to make every effort to meet the accuracy requirements of road survey and design specifications. Method: On the basis of elevation difference of limited public points, any elevation difference of the other points can be fitted or interpolated. Thus, the precise elevation can be obtained by subtracting elevation difference from the Google Earth data. Quadratic polynomial surface fitting method, cubic polynomial surface fitting method, V4 interpolation method in MATLAB and neural network method are used in this paper to process elevation data of Google Earth. And internal conformity, external conformity and cross correlation coefficient are used as evaluation indexes to evaluate the data processing effect. Results: There is no fitting difference at the fitting point while using V4 interpolation method. Its external conformity is the largest and the effect of accuracy improvement is the worst, so V4 interpolation method is ruled out. The internal and external conformity of the cubic polynomial surface fitting method both are better than those of the quadratic polynomial surface fitting method. The neural network method has a similar fitting effect with the cubic polynomial surface fitting method, but its fitting effect is better in the case of a higher elevation difference. Because the neural network method is an unmanageable fitting model, the cubic polynomial surface fitting method should be mainly used and the neural network method can be used as the auxiliary method in the case of higher elevation difference. Conclusions: Cubic polynomial surface fitting method can obviously

Marginal and internal fit of cobalt-chromium copings fabricated using the conventional and the direct metal laser sintering techniques: A comparative in vitro study

Directory of Open Access Journals (Sweden)

Sujana Ullattuthodi

2017-01-01

Conclusions: Within the limitations of this in vitro study, it was concluded that the internal fit of conventional copings was superior to that of the DMLS copings. Marginal fit of the copings fabricated by two different techniques had no significant difference.

Problems relating to the evaluation of the fitness of occupationally exposed personnel

International Nuclear Information System (INIS)

Strambi, E.

1976-01-01

The medical officer must consider the fitness of workers from two points of view: psycho-physic characteristics required to make a given work; ability to support the specific risks associated with this work. Workers whose exposure may exceed 3/10 of the Maximum Permissible Doses may require more detailed surveillance to detect any conditions contra-indicating employment on specific tasks. Four groups of clinical conditions, which should be taken into account, by the medical officer, for the evaluation of the fitness of occupationally exposed personnel, are considered. Practical examples are shown for each group. Several aspects of the methodology of routine medical examination, are also discussed. Concerning the fitness of personnel after accidental overexposure, two possibilities are considered, as a function of the presence or absence of invalidating after-effects [fr

Effect of combined loading due to bending and internal pressure on pipe flaw evaluation criteria

International Nuclear Information System (INIS)

Miura, Naoki; Sakai, Shinsuke

2008-01-01

Considering a rule for the rationalization of maintenance of Light Water Reactor piping, reliable flaw evaluation criteria are essential for determining how a detected flaw will be detrimental to continuous plant operation. Ductile fracture is one of the dominant failure modes that must be considered for carbon steel piping and can be analyzed by elastic-plastic fracture mechanics. Some analytical efforts have provided various flaw evaluation criteria using load correction factors, such as the Z-factors in the JSME codes on fitness-for-service for nuclear power plants and the section XI of the ASME boiler and pressure vessel code. The present Z-factors were conventionally determined, taking conservativity and simplicity into account; however, the effect of internal pressure, which is an important factor under actual plant conditions, was not adequately considered. Recently, a J-estimation scheme, LBB.ENGC for the ductile fracture analysis of circumferentially through-wall-cracked pipes subjected to combined loading was developed for more accurate prediction under more realistic conditions. This method explicitly incorporates the contributions of both bending and tension due to internal pressure by means of a scheme that is compatible with an arbitrary combined-loading history. In this study, the effect of internal pressure on the flaw evaluation criteria was investigated using the new J-estimation scheme. The Z-factor obtained in this study was compared with the presently used Z-factors, and the predictability of the current flaw evaluation criteria was quantitatively evaluated in consideration of the internal pressure. (author)

New approach in the evaluation of a fitness program at a worksite.

Science.gov (United States)

Shirasaya, K; Miyakawa, M; Yoshida, K; Tanaka, C; Shimada, N; Kondo, T

1999-03-01

The most common methods for the economic evaluation of a fitness program at a worksite are cost-effectiveness, cost-benefit, and cost-utility analyses. In this study, we applied a basic microeconomic theory, "neoclassical firm's problems," as the new approach for it. The optimal number of physical-exercise classes that constitute the core of the fitness program are determined using the cubic health production function. The optimal number is defined as the number that maximizes the profit of the program. The optimal number corresponding to any willingness-to-pay amount of the participants for the effectiveness of the program is presented using a graph. For example, if the willingness-to-pay is $800, the optimal number of classes is 23. Our method can be applied to the evaluation of any health care program if the health production function can be estimated.

Evaluation of marginal fit of two all-ceramic copings with two finish lines

Science.gov (United States)

Subasi, Gulce; Ozturk, Nilgun; Inan, Ozgur; Bozogullari, Nalan

2012-01-01

Objectives: This in-vitro study investigated the marginal fit of two all-ceramic copings with 2 finish line designs. Methods: Forty machined stainless steel molar die models with two different margin designs (chamfer and rounded shoulder) were prepared. A total of 40 standardized copings were fabricated and divided into 4 groups (n=10 for each finish line-coping material). Coping materials tested were IPS e.max Press and Zirkonzahn; luting agent was Variolink II. Marginal fit was evaluated after cementation with a stereomicroscope (Leica MZ16). Two-way analysis of variance and Tukey-HSD test were performed to assess the influence of each finish line design and ceramic type on the marginal fit of 2 all-ceramic copings (α =.05). Results: Two-way analysis of variance revealed no statistically significant differences for marginal fit relative to finish lines (P=.362) and ceramic types (P=.065). Conclusion: Within the limitations of this study, both types of all-ceramic copings demonstrated that the mean marginal fit was considered acceptable for clinical application (⩽120 μm). PMID:22509119

Exploring the utility of cardiorespiratory fitness as a population health surveillance indicator for children and youth: An international analysis of results from the 20-m shuttle run test.

Science.gov (United States)

Lang, Justin J

2018-02-01

Emerging evidence has demonstrated the strong link between cardiorespiratory fitness and multiple aspects of health (i.e., physiological, physical, psychosocial, cognitive), independent of physical activity, among school-aged children and youth. Cardiorespiratory fitness is a trait that does not vary substantially from day-to-day, and provides an indication of recent physical activity levels, making it an important possible indicator of population health. Thus, the objective of this dissertation was to investigate the utility of cardiorespiratory fitness, measured using the 20-m shuttle run test, as a broad, holistic health indicator for population health surveillance among children and youth. To achieve this objective we completed 7 manuscripts, all prepared for submission to peer-reviewed, scientific journals: (1) Systematic review of the relationship between 20-m shuttle run performance and health indicators among children and youth. (2) Review of criterion-referenced standards for cardiorespiratory fitness: what percentage of 1 142 026 international children and youth are apparently healthy? (3) Cardiorespiratory fitness is associated with physical literacy in a large sample of Canadian children aged 8 to 12 years. (4) International variability in 20-m shuttle run performance in children and youth: Who are the fittest from a 50-country comparison? A systematic review with pooling of aggregate results. (5) Making a case for cardiorespiratory fitness surveillance among children and youth. (6) International normative 20-m shuttle run values from 1 142 026 children and youth representing 50 countries. (7) Temporal trends in the cardiorespiratory fitness of children and adolescents representing 19 high-income and upper middle-income countries between 1981 and 2014. Combined, this dissertation provides support for the importance of cardiorespiratory fitness for health surveillance among school-aged children and youth. Results from the international analysis

Fragment Impact Toolkit (FIT)

Energy Technology Data Exchange (ETDEWEB)

Shevitz, Daniel Wolf [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Key, Brian P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Garcia, Daniel B. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-09-05

The Fragment Impact Toolkit (FIT) is a software package used for probabilistic consequence evaluation of fragmenting sources. The typical use case for FIT is to simulate an exploding shell and evaluate the consequence on nearby objects. FIT is written in the programming language Python and is designed as a collection of interacting software modules. Each module has a function that interacts with the other modules to produce desired results.

An Evaluation of the Significance of Work-Related Influence Factors on Fitness and the Development of Medical and Orthopaedic Conditions in Military Executives

Directory of Open Access Journals (Sweden)

Christoph Schulze

2016-01-01

Full Text Available Occupational health promotion is an effective tool to improve the state of health of employees. As part of occupational health promotion in the German Bundeswehr, top-ranking military executives are offered a medical examination and training programme. Health-related data is collected as a basis for training and lifestyle counselling. This data was subjected to a retrospective evaluation in order to identify occupational risk factors and their correlation with cardiovascular resilience, trunk strength, and the development of orthopaedic and internal disorders. A total of 122 military executives (all male, age 54.6±4.2 years answered a questionnaire aimed at evaluating private and occupational stress factors. The medical history was followed by a medical and orthopaedic examination involving a lactate performance test (treadmill or bicycle ergometry and an isometric trunk strength measurement. The data obtained was then statistically evaluated. For military executives, work-related travelling and commuting involve a high risk of medical and orthopaedic conditions. Regular exercise leads to improved fitness levels. In order to prevent medical problems, military executives working long hours should regularly take part in fitness and weight training under professional instructions.

Predicting fitness to practise events in international medical graduates who registered as UK doctors via the Professional and Linguistic Assessments Board (PLAB) system: a national cohort study.

Science.gov (United States)

Tiffin, Paul A; Paton, Lewis W; Mwandigha, Lazaro M; McLachlan, John C; Illing, Jan

2017-03-20

International medical graduates working in the UK are more likely to be censured in relation to fitness to practise compared to home graduates. Performance on the General Medical Council's (GMC's) Professional and Linguistic Assessments Board (PLAB) tests and English fluency have previously been shown to predict later educational performance in this group of doctors. It is unknown whether the PLAB system is also a valid predictor of unprofessional behaviour and malpractice. The findings would have implications for regulatory policy. This was an observational study linking data relating to fitness to practise events (referral or censure), PLAB performance, demographic variables and English language competence, as evaluated via the International English Language Test System (IELTS). Data from 27,330 international medical graduates registered with the GMC were analysed, including 210 doctors who had been sanctioned in relation to at least one fitness to practise issue. The main outcome was risk of eventual censure (including a warning). The significant univariable educational predictors of eventual censure (versus no censures or referrals) were lower PLAB part 1 (hazard ratio [HR], 0.99; 95% confidence interval, 0.98 to 1.00) and part 2 scores (HR, 0.94; 0.91 to 0.97) at first sitting, multiple attempts at both parts of the PLAB, lower IELTS reading (HR, 0.79; 0.65 to 0.94) and listening scores (HR, 0.76; 0.62 to 0.93) and higher IELTS speaking scores (HR, 1.28; 1.04 to 1.57). Multiple resits at either part of the PLAB and higher IELTS speaking score (HR, 1.49; 1.20 to 1.84) were also independent predictors of censure. We estimated that the proposed limit of four attempts at both parts of the PLAB would reduce the risk in this entire group by only approximately two censures per 5 years in this group of doctors. Making the PLAB, or any replacement assessment, more stringent and raising the required standards of English reading and listening may result in fewer fitness

Feed-in Tariff Pricing and Social Burden in Japan: Evaluating International Learning through a Policy Transfer Approach

Directory of Open Access Journals (Sweden)

Yugo Tanaka

2017-10-01

Full Text Available Feed-in tariff (FiT policy approaches for renewable energy (RE deployment are employed in many nations around the world. Although FiTs are considered effective in boosting RE deployment, the issue of increasing energy bills and social burden is an often-reported negative impact of their use. The FiT has been employed in Japan since 2012, following after many developed countries, and, as was experienced in other nations, led to a social burden imparted on society significantly higher than initial government estimates. Although policy decision making does not necessarily reflect international policy experience, it is still prudent to ask how international policy experiences of social burden increase were considered within the Japanese approach. In this research, we analyzed the transfer process by adapting a conventional model to develop more objective observations than was previously possible, by setting a benchmark for evaluation based on prior international experiences. We identified two streams of policy transfer, each led by different actors; the government and representatives of the National Diet of Japan (Diet. Both actors were exposed to the same experiences, however the interpretation, application to policy development and priority settings employed were vastly different. Although the framework can only assess policy learning processes, we have found that the government undertook a reasonable and rational process toward learning, while, on the other hand, the modified bill developed by the Diet members did not thoroughly derive learnings in the same way, due to cognitive and political reasons, and specifically, the issue of limiting social burden was not addressed.

Marginal and internal fit of pressed lithium disilicate inlays fabricated with milling, 3D printing, and conventional technologies.

Science.gov (United States)

Homsy, Foudda R; Özcan, Mutlu; Khoury, Marwan; Majzoub, Zeina A K

2017-09-29

The subtractive and additive computer-aided design and computer-aided manufacturing (CAD-CAM) of lithium disilicate partial coverage restorations is poorly documented. The purpose of this in vitro study was to compare the marginal and internal fit accuracy of lithium disilicate glass-ceramic inlays fabricated with conventional, milled, and 3-dimensional (3D) printed wax patterns. A dentoform mandibular first molar was prepared for a mesio-occlusal ceramic inlay. Five groups of 15 inlays were obtained through conventional impression and manual wax pattern (group CICW); conventional impression, laboratory scanning of the stone die, CAD-CAM milled wax blanks (group CIDW) or 3D printed wax patterns (group CI3DW); and scanning of the master preparation with intraoral scanner and CAD-CAM milled (group DIDW) or 3D printed wax patterns (group DI3DW). The same design was used to produce the wax patterns in the last 4 groups. The replica technique was used to measure marginal and internal adaptation by using stereomicroscopy. Mixed-model ANOVA was used to assess differences according to the groups and discrepancy location (α=.05). Group DIDW showed the smallest marginal discrepancy (24.3 μm) compared with those of groups CICW (45.1 μm), CIDW (33.7 μm), CI3DW (39.8 μm), and DI3DW (39.7 μm) (Pimpressions and subtractive milling of wax patterns resulted in better marginal and internal fit accuracy than either conventional impression/fabrication or additive 3D manufacturing. Three-dimensional printed wax patterns yielded fit values similar to those of the conventionally waxed inlays. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Novel artificial stool material for external quality assurance (EQA) on a fecal immunochemical test for hemoglobin (FIT): The confirmed utility of stable hemoglobin and an internal standard material.

Science.gov (United States)

Yasui, Ryota; Yamada, Miyu; Takehara, Shizuka; Sakurabayashi, Ikunosuke; Watanabe, Katsunori

2018-04-16

The fecal immunochemical test for hemoglobin (FIT), which detects lower gastrointestinal bleeding, is widely accepted for population-based colorectal cancer (CRC) screening programs. However, the FIT screening process has not been standardized yet, and standardizing the pre-analytical phase and establishing an external quality assurance (EQA) program compliant with ISO requirements is urgently needed. Although there have been various attempts to establish EQA materials suitable for FIT, no materials have yet been reported to have sufficient uniformity and acceptable immunochemical stability of hemoglobin (Hb). The Health Care Technology Foundation (HECTEF; Tokyo Japan) is now developing a ready-to-use artificial stool containing Hb and an internal standard, glycerol. Accordingly, we verified the adaptability and efficacy of this material for the evaluation of the specimen collection phase of FIT. This material uniformly contained both Hb and glycerol. The glycerol allowed us to estimate the weight of the collected artificial stool and to correct the Hb concentration with the estimated weight. Furthermore, the stability of both Hb and glycerol were confirmed to be sufficient for an EQA material under appropriate storage, in-use, repeated freeze-thaw, and heated conditions. These in-house performance characteristics suggest that HECTEF artificial stool is acceptable as an EQA material for FIT. Copyright © 2018 Elsevier B.V. All rights reserved.

Three-Dimensional Digital Evaluation of the Fit of Endocrowns Fabricated from Different CAD/CAM Materials.

Science.gov (United States)

Zimmermann, Moritz; Valcanaia, Andre; Neiva, Gisele; Mehl, Albert; Fasbinder, Dennis

2018-03-06

A wide variety of CAD/CAM materials are available for single-tooth restorations. CAD/CAM material characteristics are different and may influence CAM fabrication accuracy. There is no study investigating the influence of different CAD/CAM materials on the final fit of the restoration. The aim of this study was to evaluate the fit of endocrowns fabricated from different CAD/CAM materials using a new 3D evaluation method with an intraoral scanning system. The null hypothesis was that there are no significant differences for the fitting accuracy of different CAD/CAM materials. Preparation for an endocrown was performed on a maxillary right first molar on a typodont, and restorations were fabricated with a chairside CAD/CAM system (CEREC Omnicam, MCXL). Three groups using three different CAD/CAM materials were established (each n = 10): zirconia-reinforced lithium silicate ceramic (Celtra Duo; CD), leucite-reinforced silicate ceramic (Empress CAD; EM), resin nanoceramic (Lava Ultimate; LU). A 3D digital measurement technique (OraCheck, Cyfex AG) using an intraoral scanner (CEREC Omnicam) was used to measure the difference in fit between the three materials for a master endocrown preparation. The preparation scan and the endocrown fit scan were matched with special difference analysis software OraCheck. Three areas were selected for fitting accuracy measurements: margin (MA), axial (AX), occlusal (OC). Statistical analysis was performed using 80% percentile, one-way ANOVA, and post-hoc Scheffé test. Significance level was set to p = 0.05. Results varied from best 88.9 ± 7.7 μm for marginal fit of resin nanoceramic restorations (LU_MA) to worst 182.3 ± 24.0 μm for occlusal fit of zirconia-reinforced lithium silicate restorations (CD_OC). Statistically significant differences were found both within and among the test groups. Group CD performed statistically significantly different from group LU for marginal fit (MA) and axial fit (AX) (p 0.05). Deviation pattern for

Evaluation of marginal and internal gaps of metal ceramic crowns obtained from conventional impressions and casting techniques with those obtained from digital techniques.

Science.gov (United States)

Rai, Rathika; Kumar, S Arun; Prabhu, R; Govindan, Ranjani Thillai; Tanveer, Faiz Mohamed

2017-01-01

Accuracy in fit of cast metal restoration has always remained as one of the primary factors in determining the success of the restoration. A well-fitting restoration needs to be accurate both along its margin and with regard to its internal surface. The aim of the study is to evaluate the marginal fit of metal ceramic crowns obtained by conventional inlay casting wax pattern using conventional impression with the metal ceramic crowns obtained by computer-aided design and computer-aided manufacturing (CAD/CAM) technique using direct and indirect optical scanning. This in vitro study on preformed custom-made stainless steel models with former assembly that resembles prepared tooth surfaces of standardized dimensions comprised three groups: the first group included ten samples of metal ceramic crowns fabricated with conventional technique, the second group included CAD/CAM-milled direct metal laser sintering (DMLS) crowns using indirect scanning, and the third group included DMLS crowns fabricated by direct scanning of the stainless steel model. The vertical marginal gap and the internal gap were evaluated with the stereomicroscope (Zoomstar 4); post hoc Turkey's test was used for statistical analysis. One-way analysis of variance method was used to compare the mean values. Metal ceramic crowns obtained from direct optical scanning showed the least marginal and internal gap when compared to the castings obtained from inlay casting wax and indirect optical scanning. Indirect and direct optical scanning had yielded results within clinically acceptable range.

Marginal and Internal Fit of Cobalt-Chromium Fixed Dental Prostheses Generated from Digital and Conventional Impressions

OpenAIRE

Svanborg, Per; Skjerven, Henrik; Carlsson, Pablo; Eliasson, Alf; Karlsson, Stig; Örtorp, Anders

2014-01-01

Objectives. Digital impressions are increasingly used and have the potential to avoid the problem of inaccurate impressions. Only a few studies to verify the accuracy of digital impressions have been performed. The purpose of this study was to compare the marginal and internal fit of 3-unit tooth supported fixed dental prostheses (FDPs) fabricated from digital and conventional impressions. Methods. Ten FDPs were produced from digital impressions using the iTero system and 10 FDPs were produce...

Construct validity and test–retest reliability of the International Fitness Scale (IFIS in Colombian children and adolescents aged 9–17.9 years: the FUPRECOL study

Directory of Open Access Journals (Sweden)

Robinson Ramírez-Vélez

2017-05-01

Full Text Available Background There is a lack of instruments and studies written in Spanish evaluating physical fitness, impeding the determination of the current status of this important health indicator in the Latin population, especially in Colombia. The aim of the study was two-fold: to examine the validity of the International Fitness Scale (IFIS with a population-based sample of schoolchildren from Bogota, Colombia and to examine the reliability of the IFIS with children and adolescents from Engativa, Colombia. Methods The sample comprised 1,873 Colombian youths (54.5% girls aged 9–17.9 years. We measured their adiposity markers (waist-to-height ratio, skinfold thickness, percentage of body fat and body mass index, blood pressure, lipids profile, fasting glucose, and physical fitness level (self-reported and measured. A validated cardiometabolic risk index score was also used. An age- and sex-matched subsample of 229 schoolchildren who were not originally included in the sample completed the IFIS twice for reliability purposes. Results Our data suggest that both measured and self-reported overall physical fitness levels were inversely associated with percentage of body fat indicators and the cardiometabolic risk index score. Overall, schoolchildren who self-reported “good” or “very good” fitness had better measured fitness levels than those who reported “very poor/poor” fitness (all p < 0.001. The test-retest reliability of the IFIS items was also good, with an average weighted kappa of 0.811. Discussion Our findings suggest that self-reported fitness, as assessed by the IFIS, is a valid, reliable, and health-related measure. Furthermore, it can be a good alternative for future use in large studies with Latin schoolchildren from Colombia.

Factors Influencing Physical Fitness Evaluation.

Science.gov (United States)

Haarer, Barbara G.

This annotated bibliography focuses on works that examine areas in which the physical educator can improve the administration of physical fitness tests in the elementary and secondary schools. The first part contains annotations that examine modifications of existing components which measure aspects of muscular and cardiovascular endurance. The…

Comparative Evaluation of Conventional and Accelerated Castings on Marginal Fit and Surface Roughness

Science.gov (United States)

Jadhav, Vivek Dattatray; Motwani, Bhagwan K.; Shinde, Jitendra; Adhapure, Prasad

2017-01-01

Aims: The aim of this study was to evaluate the marginal fit and surface roughness of complete cast crowns made by a conventional and an accelerated casting technique. Settings and Design: This study was divided into three parts. In Part I, the marginal fit of full metal crowns made by both casting techniques in the vertical direction was checked, in Part II, the fit of sectional metal crowns in the horizontal direction made by both casting techniques was checked, and in Part III, the surface roughness of disc-shaped metal plate specimens made by both casting techniques was checked. Materials and Methods: A conventional technique was compared with an accelerated technique. In Part I of the study, the marginal fit of the full metal crowns as well as in Part II, the horizontal fit of sectional metal crowns made by both casting techniques was determined, and in Part III, the surface roughness of castings made with the same techniques was compared. Statistical Analysis Used: The results of the t-test and independent sample test do not indicate statistically significant differences in the marginal discrepancy detected between the two casting techniques. Results: For the marginal discrepancy and surface roughness, crowns fabricated with the accelerated technique were significantly different from those fabricated with the conventional technique. Conclusions: Accelerated casting technique showed quite satisfactory results, but the conventional technique was superior in terms of marginal fit and surface roughness. PMID:29042726

Comparative Evaluation of Marginal and Internal Gap of Co-Cr Copings Fabricated from Conventional Wax Pattern, 3D Printed Resin Pattern and DMLS Tech: An In Vitro Study.

Science.gov (United States)

Bhaskaran, Eswaran; Azhagarasan, N S; Miglani, Saket; Ilango, T; Krishna, G Phani; Gajapathi, B

2013-09-01

Accuracy of the fit of the restoration has always remained as one of the primary factors in determining success of the restoration. A well fitting restoration needs to be accurate both along its margins and internal surface. This study was conducted to comparatively evaluate the marginal gap and internal gap of cobalt-chromium (Co-Cr) copings fabricated by conventional casting procedures and with direct metal laser sintering (DMLS) technique. Among the total of 30 test samples 10 cast copings were made from inlay casting wax and 10 from 3D printed resin pattern. 10 copings were obtained from DMLS technique. All the 30 test samples were then cemented sequentially on stainless steel model using pressure indicating paste and evaluated for vertical marginal gap in 8 predetermined reference areas. All copings were then removed and partially sectioned and cemented sequentially on same master model for evaluation of internal gap at 4 predetermined reference areas. Both marginal gap and internal gap were measured in microns using video measuring system (VMS2010F). The results obtained for both marginal and internal gap were statistically analyzed and the values fall within the clinically acceptable range. The DMLS technique had an edge over the other two techniques used, as it exhibited minimal gap in the marginal region which is an area of chief concern.

Evaluation of peak-fitting software for gamma spectrum analysis

International Nuclear Information System (INIS)

Zahn, Guilherme S.; Genezini, Frederico A.; Moralles, Mauricio

2009-01-01

In all applications of gamma-ray spectroscopy, one of the most important and delicate parts of the data analysis is the fitting of the gamma-ray spectra, where information as the number of counts, the position of the centroid and the width, for instance, are associated with each peak of each spectrum. There's a huge choice of computer programs that perform this type of analysis, and the most commonly used in routine work are the ones that automatically locate and fit the peaks; this fit can be made in several different ways - the most common ways are to fit a Gaussian function to each peak or simply to integrate the area under the peak, but some software go far beyond and include several small corrections to the simple Gaussian peak function, in order to compensate for secondary effects. In this work several gamma-ray spectroscopy software are compared in the task of finding and fitting the gamma-ray peaks in spectra taken with standard sources of 137 Cs, 60 Co, 133 Ba and 152 Eu. The results show that all of the automatic software can be properly used in the task of finding and fitting peaks, with the exception of GammaVision; also, it was possible to verify that the automatic peak-fitting software did perform as well as - and sometimes even better than - a manual peak-fitting software. (author)

Organizational Structures that Support Internal Program Evaluation

Science.gov (United States)

Lambur, Michael T.

2008-01-01

This chapter explores how the structure of large complex organizations such as Cooperative Extension affects their ability to support internal evaluation of their programs and activities. Following a literature review of organizational structure and its relation to internal evaluation capacity, the chapter presents the results of interviews with…

Evaluation of marginal and internal gaps of metal ceramic crowns obtained from conventional impressions and casting techniques with those obtained from digital techniques

Directory of Open Access Journals (Sweden)

Rathika Rai

2017-01-01

Full Text Available Background: Accuracy in fit of cast metal restoration has always remained as one of the primary factors in determining the success of the restoration. A well-fitting restoration needs to be accurate both along its margin and with regard to its internal surface. Aim: The aim of the study is to evaluate the marginal fit of metal ceramic crowns obtained by conventional inlay casting wax pattern using conventional impression with the metal ceramic crowns obtained by computer-aided design and computer-aided manufacturing (CAD/CAM technique using direct and indirect optical scanning. Materials and Methods: This in vitro study on preformed custom-made stainless steel models with former assembly that resembles prepared tooth surfaces of standardized dimensions comprised three groups: the first group included ten samples of metal ceramic crowns fabricated with conventional technique, the second group included CAD/CAM-milled direct metal laser sintering (DMLS crowns using indirect scanning, and the third group included DMLS crowns fabricated by direct scanning of the stainless steel model. The vertical marginal gap and the internal gap were evaluated with the stereomicroscope (Zoomstar 4; post hoc Turkey's test was used for statistical analysis. One-way analysis of variance method was used to compare the mean values. Results and Conclusion: Metal ceramic crowns obtained from direct optical scanning showed the least marginal and internal gap when compared to the castings obtained from inlay casting wax and indirect optical scanning. Indirect and direct optical scanning had yielded results within clinically acceptable range.

Youth fitness testing: the effect of percentile-based evaluative feedback on intrinsic motivation.

Science.gov (United States)

Whitehead, J R; Corbin, C B

1991-06-01

This study was a test of Deci and Ryan's (1985) cognitive evaluation theory in a fitness testing situation. More specifically, it was a test of Proposition 2 of that theory, which posits that external events that increase or decrease perceived competence will increase or decrease intrinsic motivation. Seventh and eighth grade schoolchildren (N = 105) volunteered for an experiment that was ostensibly to collect data on a new youth fitness test (the Illinois Agility Run). After two untimed practice runs, a specially adapted version of the Intrinsic Motivation Inventory (IMI) was administered as a pretest of intrinsic motivation. Two weeks later when subjects ran again, they were apparently electronically timed. In reality, the subjects were given bogus feedback. Subjects in a positive feedback condition were told their scores were above the 80th percentile, while those in a negative feedback condition were told their scores were below the 20th percentile. Those in a control condition received no feedback. The IMI was again administered to the subjects after their runs. Multivariate and subsequent univariate tests were significant for all four subscale dependent variables (perceived interest-enjoyment, competence, effort, and pressure-tension). Positive feedback enhanced all aspects of intrinsic motivation, whereas negative feedback decreased them. In a further test of cognitive evaluation theory, path analysis results supported the prediction that perceived competence would mediate changes in the other IMI subscales. Taken together, these results clearly support cognitive evaluation theory and also may have important implications regarding motivation for those who administer youth fitness tests.

A CAD System for Evaluating Footwear Fit

Science.gov (United States)

Savadkoohi, Bita Ture; de Amicis, Raffaele

With the great growth in footwear demand, the footwear manufacturing industry, for achieving commercial success, must be able to provide the footwear that fulfills consumer's requirement better than it's competitors. Accurate fitting for shoes is an important factor in comfort and functionality. Footwear fitter measurement have been using manual measurement for a long time, but the development of 3D acquisition devices and the advent of powerful 3D visualization and modeling techniques, automatically analyzing, searching and interpretation of the models have now made automatic determination of different foot dimensions feasible. In this paper, we proposed an approach for finding footwear fit within the shoe last data base. We first properly aligned the 3D models using "Weighted" Principle Component Analysis (WPCA). After solving the alignment problem we used an efficient algorithm for cutting the 3D model in order to find the footwear fit from shoe last data base.

Health-Related Fitness Improvements in Morbid Obese Patients After Laparoscopic Sleeve Gastrectomy: a Cohort Study.

Science.gov (United States)

Gallart-Aragón, Tania; Fernández-Lao, Carolina; Castro-Martín, Eduardo; Cantarero-Villanueva, Irene; Cózar-Ibáñez, Antonio; Arroyo-Morales, Manuel

2017-05-01

Laparoscopic sleeve gastrectomy (LSG) has demonstrated high long-term effectiveness and major advantages over other techniques. The objective of this study was to analyze changes in physical fitness parameters in morbidly obese patients during 6 months after LSG. We conducted a descriptive observational study with 6-month follow-up in 72 LSG patients, evaluating changes in body mass index (BMI), functional capacity (6-min walking test), hand grip strength (manual dynamometry), flexibility (fingertip-to-floor test), balance (Flamingo test), physical activity level (International Physical Activity Questionnaire, IPAQ), and perception of general physical fitness (International Fitness Scale [IFIS] questionnaire). The ANOVA revealed significant improvements in BMI, functional capacity, flexibility, balance, and physical activity level (P fitness in most cases. No significant changes were found in dominant hand (P = 0.676) or non-dominant hand (P = 0.222) dynamometry. General physical fitness was positively correlated with BMI and distance in the 6-min test, and was negatively correlated with fingertip-to-floor distance. Morbidly obese patients showed major improvements at 6 months after LSG in functional capacity, balance, mobility, and physical activity, with no change in grip strength. These improvements were related to a better self-perception of general physical fitness.

Evaluation of crack-like flaw in Japanese fitness-for-service code for nuclear power plant components

International Nuclear Information System (INIS)

Kashima, Koichi

2003-01-01

For evaluation of faults detected at nuclear appliances, establishment of fitness-for-service code in Japan is focused by most of peoples. The code is a management rule to keep features of the appliances under supplying operation to their constant safe level and is a rule composing a pair with design rule. The codes for nuclear power generation facilities-rules of fitness-for-service for nuclear power plants were issued on May, 2002, by the Japan Society of Mechanical Engineering (JSME), which was added on October, 2002, by its inspection code, for its amendment. Under such states, Japan Government is proceeding on establishment of the fitness-for-service code in Japan on a base of the private rule. Here were introduced present state and tasks on content of crack-like flaw evaluation on the code under an example of the private rule of JSME, which is composed of three items of inspection, evaluation, and recovery and exchange. The evaluation of defects consists of 1) the first step of evaluation of defects and 2) the second step of evaluation of defects. The first step determines the size of defect by modeling form. When the size of defect is smaller than the evaluation criterion, the appliances can be used unconditionally. However, its size is larger than the evaluation criterion, the appliances have to be evaluated by the second step. When the estimated defects size at end of evaluation period is smaller than the permissible value, the appliances can be used within the evaluation period. But, if its size is larger than the permissible value, the appliances have to be recovered and exchanged. Modeling, evaluation criterion, evaluation of destruction, safety standards and future problems are described. (S.Y.)

Fit for Duty?: Evaluating the Physical Fitness Requirements of Battlefield Airmen.

Science.gov (United States)

Sean, Robson; Maria C, Lytell; Carra S, Sims; Stephanie, Pezard; Thomas, Manacapilli; Amanda, Anderson; Therese, Bohusch; Abigail, Haddad

2018-01-01

Military occupations can be physically demanding, yet few attempts have been made to determine the physical readiness of today's airmen to perform their jobs. Although the Air Force conducts fitness testing of all its airmen, these tests and standards are not based on validated job requirements. As part of a broader Air Force effort to measure the physical readiness of airmen to perform their jobs, this study describes a methodology for establishing physical fitness standards for four physically demanding Air Force occupational specialties-combat controller, pararescue, special operations weather team, and tactical air control party. Airmen in these specialties are collectively known as battlefield airmen. The authors sought to identify the physically demanding tasks required of battlefield airmen and ways in which fitness standards might be established to ensure that individuals in these specialties are able to perform these tasks. They reviewed the research literature and relevant military documents, conducted focus groups and interviews with battlefield airmen and other subject matter experts, and analyzed the movement patterns and physical abilities associated with each task. They found a high demand across the four specialities for strength and muscular and cardiovascular endurance, followed by agility, anaerobic power, and equilibrium, whereas they found flexibility to be less critically important. The authors recommend that a validation study be conducted next, to (a) ensure that tests measure important physical abilities required for successful mission or job performance, (b) ensure that performance on tests is a good indicator of mission or job performance, and (c) identify minimum test standards that are associated with acceptable mission or job performance.

Stress indices for ANSI standard B16.11 socket-welding fittings

International Nuclear Information System (INIS)

Rodabaugh, E.C.; Moore, S.E.

1975-08-01

Stress indices for ANSI standard B16.11 socket-welding tees, 45 0 elbows, 90 0 elbows, and couplings are developed for intended use with the Class-1 piping system design rules of Section III--Division 1 of the ASME Boiler and Pressure Vessel Code. Indices are given for the evaluation of appropriate primary stresses, primary-plus-secondary stresses, and peak stresses due to internal pressure, bending-moment loads, and thermal gradients between the fitting and the attached pipe. The proposed indices are based on the dimensional and pressure-burst requirements of the B16.11 standard, the apparent shapes of B16.11 fittings as indicated from a random sampling taken off-the-shelf, the standard pressure-temperature ratings of the fittings, and on current stress indices now in the Code for similar butt-welding fittings. Specific recommendations are made for issuing the new stress indices in a Code case. (auth)

EVALUATION OF DIFFERENT INTERNAL STANDARDS FOR ...

African Journals Online (AJOL)

internal standard addition method was evaluated with the variation in solution ... background emissions involved in generating accurate and reliable .... The most suitable atomic and ionic wavelengths (λ) for the internal standards and precious ..... spectral interferences occur and using validation parameters is currently ...

Adapting the Wii Fit Balance Board to Enable Active Video Game Play by Wheelchair Users: User-Centered Design and Usability Evaluation.

Science.gov (United States)

Thirumalai, Mohanraj; Kirkland, William B; Misko, Samuel R; Padalabalanarayanan, Sangeetha; Malone, Laurie A

2018-03-06

Active video game (AVG) playing, also known as "exergaming," is increasingly employed to promote physical activity across all age groups. The Wii Fit Balance Board is a popular gaming controller for AVGs and is used in a variety of settings. However, the commercial off-the-shelf (OTS) design poses several limitations. It is inaccessible to wheelchair users, does not support the use of stabilization assistive devices, and requires the ability to shift the center of balance (COB) in all directions to fully engage in game play. The aim of this study was to design an adapted version of the Wii Fit Balance Board to overcome the identified limitations and to evaluate the usability of the newly designed adapted Wii Fit Balance Board in persons with mobility impairments. In a previous study, 16 participants tried the OTS version of the Wii Fit Balance Board. On the basis of observed limitations, a team of engineers developed and adapted the design of the Wii Fit Balance Board, which was then subjected to multiple iterations of user feedback and design tweaks. On design completion, we recruited a new pool of participants with mobility impairments for a larger study. During their first visit, we assessed lower-extremity function using selected mobility tasks from the International Classification of Functioning, Disability and Health. During a subsequent session, participants played 2 sets of games on both the OTS and adapted versions of the Wii Fit Balance Board. Order of controller version played first was randomized. After participants played each version, we administered the System Usability Scale (SUS) to examine the participants' perceived usability. The adapted version of the Wii Fit Balance Board resulting from the user-centered design approach met the needs of a variety of users. The adapted controller (1) allowed manual wheelchair users to engage in game play, which was previously not possible; (2) included Americans with Disabilities Act-compliant handrails as part

DOUBLE-EXPONENTIAL FITTING FUNCTION FOR EVALUATION OF COSMIC-RAY-INDUCED NEUTRON FLUENCE RATE IN ARBITRARY LOCATIONS.

Science.gov (United States)

Li, Huailiang; Yang, Yigang; Wang, Qibiao; Tuo, Xianguo; Julian Henderson, Mark; Courtois, Jérémie

2017-12-01

The fluence rate of cosmic-ray-induced neutrons (CRINs) varies with many environmental factors. While many current simulation and experimental studies have focused mainly on the altitude variation, the specific rule that the CRINs vary with geomagnetic cutoff rigidity (which is related to latitude and longitude) was not well considered. In this article, a double-exponential fitting function F=(A1e-A2CR+A3)eB1Al, is proposed to evaluate the CRINs' fluence rate varying with geomagnetic cutoff rigidity and altitude. The fitting R2 can have a value up to 0.9954, and, moreover, the CRINs' fluence rate in an arbitrary location (latitude, longitude and altitude) can be easily evaluated by the proposed function. The field measurements of the CRINs' fluence rate and H*(10) rate in Mt. Emei and Mt. Bowa were carried out using a FHT-762 and LB 6411 neutron prober, respectively, and the evaluation results show that the fitting function agrees well with the measurement results. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Accuracy of Digital Impressions and Fitness of Single Crowns Based on Digital Impressions

Science.gov (United States)

Yang, Xin; Lv, Pin; Liu, Yihong; Si, Wenjie; Feng, Hailan

2015-01-01

In this study, the accuracy (precision and trueness) of digital impressions and the fitness of single crowns manufactured based on digital impressions were evaluated. #14-17 epoxy resin dentitions were made, while full-crown preparations of extracted natural teeth were embedded at #16. (1) To assess precision, deviations among repeated scan models made by intraoral scanner TRIOS and MHT and model scanner D700 and inEos were calculated through best-fit algorithm and three-dimensional (3D) comparison. Root mean square (RMS) and color-coded difference images were offered. (2) To assess trueness, micro computed tomography (micro-CT) was used to get the reference model (REF). Deviations between REF and repeated scan models (from (1)) were calculated. (3) To assess fitness, single crowns were manufactured based on TRIOS, MHT, D700 and inEos scan models. The adhesive gaps were evaluated under stereomicroscope after cross-sectioned. Digital impressions showed lower precision and better trueness. Except for MHT, the means of RMS for precision were lower than 10 μm. Digital impressions showed better internal fitness. Fitness of single crowns based on digital impressions was up to clinical standard. Digital impressions could be an alternative method for single crowns manufacturing. PMID:28793417

Accuracy of Digital Impressions and Fitness of Single Crowns Based on Digital Impressions

Directory of Open Access Journals (Sweden)

Xin Yang

2015-06-01

Full Text Available In this study, the accuracy (precision and trueness of digital impressions and the fitness of single crowns manufactured based on digital impressions were evaluated. #14-17 epoxy resin dentitions were made, while full-crown preparations of extracted natural teeth were embedded at #16. (1 To assess precision, deviations among repeated scan models made by intraoral scanner TRIOS and MHT and model scanner D700 and inEos were calculated through best-fit algorithm and three-dimensional (3D comparison. Root mean square (RMS and color-coded difference images were offered. (2 To assess trueness, micro computed tomography (micro-CT was used to get the reference model (REF. Deviations between REF and repeated scan models (from (1 were calculated. (3 To assess fitness, single crowns were manufactured based on TRIOS, MHT, D700 and inEos scan models. The adhesive gaps were evaluated under stereomicroscope after cross-sectioned. Digital impressions showed lower precision and better trueness. Except for MHT, the means of RMS for precision were lower than 10 μm. Digital impressions showed better internal fitness. Fitness of single crowns based on digital impressions was up to clinical standard. Digital impressions could be an alternative method for single crowns manufacturing.

Three dimensional fuzzy influence analysis of fitting algorithms on integrated chip topographic modeling

International Nuclear Information System (INIS)

Liang, Zhong Wei; Wang, Yi Jun; Ye, Bang Yan; Brauwer, Richard Kars

2012-01-01

In inspecting the detailed performance results of surface precision modeling in different external parameter conditions, the integrated chip surfaces should be evaluated and assessed during topographic spatial modeling processes. The application of surface fitting algorithms exerts a considerable influence on topographic mathematical features. The influence mechanisms caused by different surface fitting algorithms on the integrated chip surface facilitate the quantitative analysis of different external parameter conditions. By extracting the coordinate information from the selected physical control points and using a set of precise spatial coordinate measuring apparatus, several typical surface fitting algorithms are used for constructing micro topographic models with the obtained point cloud. In computing for the newly proposed mathematical features on surface models, we construct the fuzzy evaluating data sequence and present a new three dimensional fuzzy quantitative evaluating method. Through this method, the value variation tendencies of topographic features can be clearly quantified. The fuzzy influence discipline among different surface fitting algorithms, topography spatial features, and the external science parameter conditions can be analyzed quantitatively and in detail. In addition, quantitative analysis can provide final conclusions on the inherent influence mechanism and internal mathematical relation in the performance results of different surface fitting algorithms, topographic spatial features, and their scientific parameter conditions in the case of surface micro modeling. The performance inspection of surface precision modeling will be facilitated and optimized as a new research idea for micro-surface reconstruction that will be monitored in a modeling process

Three dimensional fuzzy influence analysis of fitting algorithms on integrated chip topographic modeling

Energy Technology Data Exchange (ETDEWEB)

Liang, Zhong Wei; Wang, Yi Jun [Guangzhou Univ., Guangzhou (China); Ye, Bang Yan [South China Univ. of Technology, Guangzhou (China); Brauwer, Richard Kars [Indian Institute of Technology, Kanpur (India)

2012-10-15

In inspecting the detailed performance results of surface precision modeling in different external parameter conditions, the integrated chip surfaces should be evaluated and assessed during topographic spatial modeling processes. The application of surface fitting algorithms exerts a considerable influence on topographic mathematical features. The influence mechanisms caused by different surface fitting algorithms on the integrated chip surface facilitate the quantitative analysis of different external parameter conditions. By extracting the coordinate information from the selected physical control points and using a set of precise spatial coordinate measuring apparatus, several typical surface fitting algorithms are used for constructing micro topographic models with the obtained point cloud. In computing for the newly proposed mathematical features on surface models, we construct the fuzzy evaluating data sequence and present a new three dimensional fuzzy quantitative evaluating method. Through this method, the value variation tendencies of topographic features can be clearly quantified. The fuzzy influence discipline among different surface fitting algorithms, topography spatial features, and the external science parameter conditions can be analyzed quantitatively and in detail. In addition, quantitative analysis can provide final conclusions on the inherent influence mechanism and internal mathematical relation in the performance results of different surface fitting algorithms, topographic spatial features, and their scientific parameter conditions in the case of surface micro modeling. The performance inspection of surface precision modeling will be facilitated and optimized as a new research idea for micro-surface reconstruction that will be monitored in a modeling process.

Application Mail Tracking Using RSA Algorithm As Security Data and HOT-Fit a Model for Evaluation System

Science.gov (United States)

Permadi, Ginanjar Setyo; Adi, Kusworo; Gernowo, Rahmad

2018-02-01

RSA algorithm give security in the process of the sending of messages or data by using 2 key, namely private key and public key .In this research to ensure and assess directly systems are made have meet goals or desire using a comprehensive evaluation methods HOT-Fit system .The purpose of this research is to build a information system sending mail by applying methods of security RSA algorithm and to evaluate in uses the method HOT-Fit to produce a system corresponding in the faculty physics. Security RSA algorithm located at the difficulty of factoring number of large coiled factors prima, the results of the prime factors has to be done to obtain private key. HOT-Fit has three aspects assessment, in the aspect of technology judging from the system status, the quality of system and quality of service. In the aspect of human judging from the use of systems and satisfaction users while in the aspect of organization judging from the structure and environment. The results of give a tracking system sending message based on the evaluation acquired.

Application Mail Tracking Using RSA Algorithm As Security Data and HOT-Fit a Model for Evaluation System

Directory of Open Access Journals (Sweden)

Setyo Permadi Ginanjar

2018-01-01

Full Text Available RSA algorithm give security in the process of the sending of messages or data by using 2 key, namely private key and public key .In this research to ensure and assess directly systems are made have meet goals or desire using a comprehensive evaluation methods HOT-Fit system .The purpose of this research is to build a information system sending mail by applying methods of security RSA algorithm and to evaluate in uses the method HOT-Fit to produce a system corresponding in the faculty physics. Security RSA algorithm located at the difficulty of factoring number of large coiled factors prima, the results of the prime factors has to be done to obtain private key. HOT-Fit has three aspects assessment, in the aspect of technology judging from the system status, the quality of system and quality of service. In the aspect of human judging from the use of systems and satisfaction users while in the aspect of organization judging from the structure and environment. The results of give a tracking system sending message based on the evaluation acquired.

The intervention process in the European Fans in Training (EuroFIT) trial: a mixed method protocol for evaluation.

Science.gov (United States)

van de Glind, I; Bunn, C; Gray, C M; Hunt, K; Andersen, E; Jelsma, J; Morgan, H; Pereira, H; Roberts, G; Rooksby, J; Røynesdal, Ø; Silva, M; Sorensen, M; Treweek, S; van Achterberg, T; van der Ploeg, H; van Nassau, F; Nijhuis-van der Sanden, M; Wyke, S

2017-07-27

EuroFIT is a gender-sensitised, health and lifestyle program targeting physical activity, sedentary time and dietary behaviours in men. The delivery of the program in football clubs, led by the clubs' community coaches, is designed to both attract and engage men in lifestyle change through an interest in football or loyalty to the club they support. The EuroFIT program will be evaluated in a multicentre pragmatic randomised controlled trial (RCT), for which ~1000 overweight men, aged 30-65 years, will be recruited in 15 top professional football clubs in the Netherlands, Norway, Portugal and the UK. The process evaluation is designed to investigate how implementation within the RCT is achieved in the various football clubs and countries and the processes through which EuroFIT affects outcomes. This mixed methods evaluation is guided by the Medical Research Council (MRC) guidance for conducting process evaluations of complex interventions. Data will be collected in the intervention arm of the EuroFIT trial through: participant questionnaires (n = 500); attendance sheets and coach logs (n = 360); observations of sessions (n = 30); coach questionnaires (n = 30); usage logs from a novel device for self-monitoring physical activity and non-sedentary behaviour (SitFIT); an app-based game to promote social support for physical activity outside program sessions (MatchFIT); interviews with coaches (n = 15); football club representatives (n = 15); and focus groups with participants (n = 30). Written standard operating procedures are used to ensure quality and consistency in data collection and analysis across the participating countries. Data will be analysed thematically within datasets and overall synthesis of findings will address the processes through which the program is implemented in various countries and clubs and through which it affects outcomes, with careful attention to the context of the football club. The process evaluation will

Evaluation of fitting functions for the representation of an O(3P)+H2 potential energy surface. I

International Nuclear Information System (INIS)

Wagner, A.F.; Schatz, G.C.; Bowman, J.M.

1981-01-01

The DIM surface of Whitlock, Muckerman, and Fisher for the O( 3 P)+H 2 system is used as a test case to evaluate the usefulness of a variety of fitting functions for the representation of potential energy surfaces. Fitting functions based on LEPS, BEBO, and rotated Morse oscillator (RMO) forms are examined. Fitting procedures are developed for combining information about a small portion of the surface and the fitting function to predict where on the surface more information must be obtained to improve the accuracy of the fit. Both unbiased procedures and procedures heavily biased toward the saddle point region of the surface are investigated. Collinear quasiclassical trajectory calculations of the reaction rate constant and one and three dimensional transition state theory rate constant calculations are performed and compared for selected fits and the exact DIM test surface. Fitting functions based on BEBO and RMO forms are found to give quite accurate results

Characterization of small-to-medium head-and-face dimensions for developing respirator fit test panels and evaluating fit of filtering facepiece respirators with different faceseal design

Science.gov (United States)

Lin, Yi-Chun

2017-01-01

A respirator fit test panel (RFTP) with facial size distribution representative of intended users is essential to the evaluation of respirator fit for new models of respirators. In this study an anthropometric survey was conducted among youths representing respirator users in mid-Taiwan to characterize head-and-face dimensions key to RFTPs for application to small-to-medium facial features. The participants were fit-tested for three N95 masks of different facepiece design and the results compared to facial size distribution specified in the RFTPs of bivariate and principal component analysis design developed in this study to realize the influence of facial characteristics to respirator fit in relation to facepiece design. Nineteen dimensions were measured for 206 participants. In fit testing the qualitative fit test (QLFT) procedures prescribed by the U.S. Occupational Safety and Health Administration were adopted. As the results show, the bizygomatic breadth of the male and female participants were 90.1 and 90.8% of their counterparts reported for the U.S. youths (P < 0.001), respectively. Compared to the bivariate distribution, the PCA design better accommodated variation in facial contours among different respirator user groups or populations, with the RFTPs reported in this study and from literature consistently covering over 92% of the participants. Overall, the facial fit of filtering facepieces increased with increasing facial dimensions. The total percentages of the tests wherein the final maneuver being completed was “Moving head up-and-down”, “Talking” or “Bending over” in bivariate and PCA RFTPs were 13.3–61.9% and 22.9–52.8%, respectively. The respirators with a three-panel flat fold structured in the facepiece provided greater fit, particularly when the users moved heads. When the facial size distribution in a bivariate RFTP did not sufficiently represent petite facial size, the fit testing was inclined to overestimate the general fit

International scope of data evaluation

International Nuclear Information System (INIS)

Pearlstein, S.

1985-01-01

This paper summarizes the principal national and international evaluation activities that contributed to the widespread use of evaluated data files. Emphasis is placed on those efforts that have become best known through the availability of data, documentation, and computer codes. Early attempts at nuclear data evaluation consisted of improving communication among measurers of similar information. As reactor methodology proceeded from a four factor formula to multi-group theory the demand for detailed representation of nuclear data increased. The systematic access to large volumes of data required placing the information in computer readable formats

Inspection, evaluation and maintenance guidelines for reactor vessel internals in JAPAN

International Nuclear Information System (INIS)

Sakashita, Akihiro; Goto, Tomoya; Hirano, Shinro; Dozaki, Koji

2010-01-01

Inspection and Evaluation Guidelines for reactor internals has been taken into the Rules on Fitness-for–Service for Nuclear Power Plants of The Japan Society of Mechanical Engineers. It is a base of the maintenance plan of each Nuclear Power Plant. A plant maintenance methodology will have more importance to maintain the plant safety and stable plant operation. This paper introduces the systematization of the maintenance such as repair, replacement, preventive maintenance in these guidelines. Maintenance methodologies are classified follows. Repair: methodology to reinforce degraded parts by some methods or prevent progress of degradation of without replacement of the existing structure when the degradation of structure is actualized. Replacement: methodology to replace the existing structure with new one when the degradation of structure is actualized. Preventive maintenance : methodology to mitigate the damaged condition. When the maintenance methodologies are implemented in the actual plant, we have to consider the feedback of the inspection program and plant life management. (author)

Combining Internal and External Evaluation: A Case for School-Based Evaluation.

Science.gov (United States)

Nevo, David

1994-01-01

School-based evaluation, the focus of this article, is conceived of as neither a synonym for internal evaluation nor an antonym for external evaluation, but as a combination that is examined through a review of recent research. A school-based evaluation in Israel illustrates combining these approaches in a complementary way. (SLD)

Shoulder Injuries in Individuals Who Participate in CrossFit Training

OpenAIRE

Summitt, Ryan J.; Cotton, Ryan A.; Kays, Adam C.; Slaven, Emily J.

2016-01-01

Background: CrossFit, a sport and fitness program, has become increasingly popular both nationally and internationally. Researchers have recently identified significant improvements in health and wellness due to CrossFit. However, some individuals assert that CrossFit poses an inherent risk of injury, specifically to the shoulder, due to the intensity of training. Currently, there is limited evidence to support this assertion. Hypothesis: Exercises performed during CrossFit do not place the s...

A Stepwise Fitting Procedure for automated fitting of Ecopath with Ecosim models

Directory of Open Access Journals (Sweden)

Erin Scott

2016-01-01

Full Text Available The Stepwise Fitting Procedure automates testing of alternative hypotheses used for fitting Ecopath with Ecosim (EwE models to observation reference data (Mackinson et al. 2009. The calibration of EwE model predictions to observed data is important to evaluate any model that will be used for ecosystem based management. Thus far, the model fitting procedure in EwE has been carried out manually: a repetitive task involving setting >1000 specific individual searches to find the statistically ‘best fit’ model. The novel fitting procedure automates the manual procedure therefore producing accurate results and lets the modeller concentrate on investigating the ‘best fit’ model for ecological accuracy.

Emerging Multinational Companies and Strategic Fit

DEFF Research Database (Denmark)

Gammeltoft, Peter; Filatotchev, Igor; Hobdari, Bersant

2012-01-01

There is an increasing awareness in international business that institutional factors need to be better incorporated into the understanding of international investments decisions of multinational companies. This applies equally to outward foreign direct investment by emerging economy firms...... has been suggested in terms of integrating various theoretical frameworks however and developing a more holistic understanding of these new investment flows. In this Editorial we propose that outward FDI from emerging economies can be better understood by analyzing them within a broad institutional...... which considers flows of outward investment from emerging economies as framed by institutional pressures at the firm level towards achieving fit between the environment, strategies, structures, resources and practices of the firm. For the multinational firm this fit must be attained along multiple...

INTEGRAL BENCHMARKS AVAILABLE THROUGH THE INTERNATIONAL REACTOR PHYSICS EXPERIMENT EVALUATION PROJECT AND THE INTERNATIONAL CRITICALITY SAFETY BENCHMARK EVALUATION PROJECT

Energy Technology Data Exchange (ETDEWEB)

J. Blair Briggs; Lori Scott; Enrico Sartori; Yolanda Rugama

2008-09-01

Interest in high-quality integral benchmark data is increasing as efforts to quantify and reduce calculational uncertainties accelerate to meet the demands of next generation reactor and advanced fuel cycle concepts. The International Reactor Physics Experiment Evaluation Project (IRPhEP) and the International Criticality Safety Benchmark Evaluation Project (ICSBEP) continue to expand their efforts and broaden their scope to identify, evaluate, and provide integral benchmark data for method and data validation. Benchmark model specifications provided by these two projects are used heavily by the international reactor physics, nuclear data, and criticality safety communities. Thus far, 14 countries have contributed to the IRPhEP, and 20 have contributed to the ICSBEP. The status of the IRPhEP and ICSBEP is discussed in this paper, and the future of the two projects is outlined and discussed. Selected benchmarks that have been added to the IRPhEP and ICSBEP handbooks since PHYSOR’06 are highlighted, and the future of the two projects is discussed.

INTEGRAL BENCHMARKS AVAILABLE THROUGH THE INTERNATIONAL REACTOR PHYSICS EXPERIMENT EVALUATION PROJECT AND THE INTERNATIONAL CRITICALITY SAFETY BENCHMARK EVALUATION PROJECT

International Nuclear Information System (INIS)

J. Blair Briggs; Lori Scott; Enrico Sartori; Yolanda Rugama

2008-01-01

Interest in high-quality integral benchmark data is increasing as efforts to quantify and reduce calculational uncertainties accelerate to meet the demands of next generation reactor and advanced fuel cycle concepts. The International Reactor Physics Experiment Evaluation Project (IRPhEP) and the International Criticality Safety Benchmark Evaluation Project (ICSBEP) continue to expand their efforts and broaden their scope to identify, evaluate, and provide integral benchmark data for method and data validation. Benchmark model specifications provided by these two projects are used heavily by the international reactor physics, nuclear data, and criticality safety communities. Thus far, 14 countries have contributed to the IRPhEP, and 20 have contributed to the ICSBEP. The status of the IRPhEP and ICSBEP is discussed in this paper, and the future of the two projects is outlined and discussed. Selected benchmarks that have been added to the IRPhEP and ICSBEP handbooks since PHYSOR-06 are highlighted, and the future of the two projects is discussed

Automated external defibrillators in the Australian fitness industry.

Science.gov (United States)

Norton, Kevin I; Norton, Lynda H

2008-04-01

Sudden cardiac arrest (SCA) occurs in many thousands of Australians each year. Scientific evidence shows an increased survival rate for individuals who receive electrical defibrillation in the first few minutes after SCA. In the last decade automated (rhythm-detecting) external defibrillators (AEDs) have become available that are portable and affordable. Although still relatively rare, there is still the potential that SCA may occur when a person undertakes physical activity. Consequently, health/fitness centres are increasingly recognised as higher risk sites that may benefit from placement of AEDs. There are no laws in Australia requiring health/fitness centres to install AEDs. However, several international and professional organisations have "strongly encouraged" larger centres to install AEDs. Guidelines and algorithms are presented to help estimate the risk of SCA in fitness centres. Fitness centre placement is particularly important if the clientele is older or has a 'high-risk' profile, for example, clients with cardiovascular, respiratory or metabolic disease. International negligence case law and duty of care principles suggests the standard of care required in health/fitness centres may be increasing. Therefore, it may be prudent to install AEDs in larger centres and those in which higher risk groups are physically active.

Using R and WinBUGS to fit a generalized partial credit model for developing and evaluating patient-reported outcomes assessments.

Science.gov (United States)

Li, Yuelin; Baser, Ray

2012-08-15

The US Food and Drug Administration recently announced the final guidelines on the development and validation of patient-reported outcomes (PROs) assessments in drug labeling and clinical trials. This guidance paper may boost the demand for new PRO survey questionnaires. Henceforth, biostatisticians may encounter psychometric methods more frequently, particularly item response theory (IRT) models to guide the shortening of a PRO assessment instrument. This article aims to provide an introduction on the theory and practical analytic skills in fitting a generalized partial credit model (GPCM) in IRT. GPCM theory is explained first, with special attention to a clearer exposition of the formal mathematics than what is typically available in the psychometric literature. Then, a worked example is presented, using self-reported responses taken from the international personality item pool. The worked example contains step-by-step guides on using the statistical languages r and WinBUGS in fitting the GPCM. Finally, the Fisher information function of the GPCM model is derived and used to evaluate, as an illustrative example, the usefulness of assessment items by their information contents. This article aims to encourage biostatisticians to apply IRT models in the re-analysis of existing data and in future research. Copyright © 2012 John Wiley & Sons, Ltd.

Incorporating the information from direct and indirect neighbors into fitness evaluation enhances the cooperation in the social dilemmas

International Nuclear Information System (INIS)

Hu, Menglong; Wang, Juan; Kong, Lingcong; An, Kang; Bi, Tao; Guo, Baohong; Dong, Enzeng

2015-01-01

Highlights: •A novel fitness evaluation method integrating environmental information is presented. •The introduction of neighbors’ payoff favors the promotion of cooperation in the PDG. •The role of direct neighbors becomes much more prominent. •In the SDG, the cooperative behavior is also improved by this new mechanism. -- Abstract: We propose an improved fitness evaluation method to investigate the evolution of cooperation in the spatial social dilemmas. In our model, a focal player’s fitness is calculated as the linear combination of his own payoff, the average payoffs of direct and indirect neighbors in which two independent selection parameters (α and β) are used to control the proportion of various payoff contribution to the current fitness. Then, the fitness-based strategy update rule is still Fermi-like, and asynchronous update is adopted here. A large plethora of numerical simulations are performed to validate the behaviors of the current model, and the results unambiguously demonstrate that the cooperation level is greatly enhanced by introducing the payoffs from the surrounding players. In particular, the influence of direct neighbors become more evident when compared with indirect neighbors since the correlation between focal players and their direct neighbors is much closer. Current outcomes are significant for us to further illustrate the origin and emergence of cooperation within a wide variety of natural and man-made systems

International nuclear fuel cycle evaluation

International Nuclear Information System (INIS)

Witt, P.

1980-01-01

In the end of February 1980, the two-years work on the International Nuclear Fuel Cycle Evaluation (INFCE) was finished in Vienna with a plenary meeting. INFCE is likely to have been a unique event in the history of international meetings: It was ni diplomatic negotiation meeting, but a techno-analytical investigation in which the participants tenaciously shuggled for many of the formulations. Starting point had been a meeting initiated by President Carter in Washington in Oct. 1979 after the World Economy Summit Meeting in London. The results of the investigation are presented here in a brief and popular form. (orig./UA) [de

International Political Actorness of the European Union: Evaluation Criteria

Directory of Open Access Journals (Sweden)

GNATYUK N.N.

2014-06-01

Full Text Available The European Union is a completely new international entity which is hard to evaluate using traditional criteria of political actorness. Its active international presence stimulates the modeling of international actor features beyond the scope of “state-international organization” scheme. The concept of international actorness serves as a starting point for the development of appropriate analytical model. Unlike the traditional state-centered approaches which define an international actor through its affiliation witch the international system, this concept operates at the internal level of international entity and at the international structure level. Furthermore, both of these levels are treated as ontologically neutral and mutually constitutive. This basic theoretical scheme is used for elaboration of evaluation criteria of political actorness. The proposed system of criteria is based on drawing, synthesizing and developing the main writings on “new international actors” since the times of classic work by Carol A. Cosgrove and Kenneth J. Twitchett. The key elements of actorness assessed in this article include defining of capacity to act on the global scene as well as the acceptance by other actors and by international system as a whole. At the internal level, the EU’s actor capacity is measured by assessing its core elements ranging from core aspects, such as autonomy, authority, actor capability, coherence and cohesion to identity aspects. On the external level, the decisive criteria are recognition and acceptance by others which reflect expectations and perceptions of the EU. The proposed approach of evaluating the international actorness enables us to consider the political activity of the EU on the basis of coordinated system of interaction between the variables of international and domestic levels of the analysis. Furthermore, this contributes to the development of cumulative, coherent, and comprehensive theory of international

Limitations of inclusive fitness.

Science.gov (United States)

Allen, Benjamin; Nowak, Martin A; Wilson, Edward O

2013-12-10

Until recently, inclusive fitness has been widely accepted as a general method to explain the evolution of social behavior. Affirming and expanding earlier criticism, we demonstrate that inclusive fitness is instead a limited concept, which exists only for a small subset of evolutionary processes. Inclusive fitness assumes that personal fitness is the sum of additive components caused by individual actions. This assumption does not hold for the majority of evolutionary processes or scenarios. To sidestep this limitation, inclusive fitness theorists have proposed a method using linear regression. On the basis of this method, it is claimed that inclusive fitness theory (i) predicts the direction of allele frequency changes, (ii) reveals the reasons for these changes, (iii) is as general as natural selection, and (iv) provides a universal design principle for evolution. In this paper we evaluate these claims, and show that all of them are unfounded. If the objective is to analyze whether mutations that modify social behavior are favored or opposed by natural selection, then no aspect of inclusive fitness theory is needed.

Internal evaluation report

DEFF Research Database (Denmark)

Sørensen, Birgitte Holm; Meyer, Bente Tobiesen; Levinsen, Karin

2006-01-01

It is the aim of this report to assess and evaluate the internal communication and management of the Lancelot project during the first year of the project's life (October 2005- October 2006). The report focuses on these issues through the perspective of a SWOT analysis carried out by the project...... members at the interim meeting in Manchester October 6-8. The SWOT analysis was chosen for its ability to identify problem areas within an organisation or group as well as focusing on and facilitating future actions and strategies. The report contains a summary of the issues raised by the SWOT as well...

Internal evaluation report

DEFF Research Database (Denmark)

Sørensen, Birgitte Holm; Meyer, Bente; Levinsen, Karin

It is the aim of this report to assess and evaluate the internal communication and management of the Lancelot project during the first year of the project's life (October 2005- October 2006). The report focuses on these issues through the perspective of a SWOT analysis carried out by the project...... members at the interim meeting in Manchester October 6-8. The SWOT analysis was chosen for its ability to identify problem areas within an organisation or group as well as focusing on and facilitating future actions and strategies. The report contains a summary of the issues raised by the SWOT as well...

The State of Evaluation in Internal Medicine Residency

Science.gov (United States)

Holmboe, Eric; Beasley, Brent W.

2008-01-01

Background There are no nationwide data on the methods residency programs are using to assess trainee competence. The Accreditation Council for Graduate Medical Education (ACGME) has recommended tools that programs can use to evaluate their trainees. It is unknown if programs are adhering to these recommendations. Objective To describe evaluation methods used by our nation’s internal medicine residency programs and assess adherence to ACGME methodological recommendations for evaluation. Design Nationwide survey. Participants All internal medicine programs registered with the Association of Program Directors of Internal Medicine (APDIM). Measurements Descriptive statistics of programs and tools used to evaluate competence; compliance with ACGME recommended evaluative methods. Results The response rate was 70%. Programs were using an average of 4.2–6.0 tools to evaluate their trainees with heavy reliance on rating forms. Direct observation and practice and data-based tools were used much less frequently. Most programs were using at least 1 of the Accreditation Council for Graduate Medical Education (ACGME)’s “most desirable” methods of evaluation for all 6 measures of trainee competence. These programs had higher support staff to resident ratios than programs using less desirable evaluative methods. Conclusions Residency programs are using a large number and variety of tools for evaluating the competence of their trainees. Most are complying with ACGME recommended methods of evaluation especially if the support staff to resident ratio is high. PMID:18612734

Internal fit of three-unit fixed dental prostheses produced by computer-aided design/computer-aided manufacturing and the lost-wax metal casting technique assessed using the triple-scan protocol.

Science.gov (United States)

Dahl, Bjørn E; Dahl, Jon E; Rønold, Hans J

2018-02-01

Suboptimal adaptation of fixed dental prostheses (FDPs) can lead to technical and biological complications. It is unclear if the computer-aided design/computer-aided manufacturing (CAD/CAM) technique improves adaptation of FDPs compared with FDPs made using the lost-wax and metal casting technique. Three-unit FDPs were manufactured by CAD/CAM based on digital impression of a typodont model. The FDPs were made from one of five materials: pre-sintered zirconium dioxide; hot isostatic pressed zirconium dioxide; lithium disilicate glass-ceramic; milled cobalt-chromium; and laser-sintered cobalt-chromium. The FDPs made using the lost-wax and metal casting technique were used as reference. The fit of the FDPs was analysed using the triple-scan method. The fit was evaluated for both single abutments and three-unit FDPs. The average cement space varied between 50 μm and 300 μm. Insignificant differences in internal fit were observed between the CAD/CAM-manufactured FDPs, and none of the FPDs had cement spaces that were statistically significantly different from those of the reference FDP. For all FDPs, the cement space at a marginal band 0.5-1.0 mm from the preparation margin was less than 100 μm. The milled cobalt-chromium FDP had the closest fit. The cement space of FDPs produced using the CAD/CAM technique was similar to that of FDPs produced using the conventional lost-wax and metal casting technique. © 2017 Eur J Oral Sci.

Rethinking evaluation | IDRC - International Development Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

2010-10-06

Oct 6, 2010 ... But in a rapidly changing world, how should evaluation methods ... panel discussion at Carleton University hosted by the International ... Public Service Commission, also reflected on the changes triggered by globalization.

Clinical evaluation comparing the fit of all-ceramic crowns obtained from silicone and digital intraoral impressions based on wavefront sampling technology.

Science.gov (United States)

Pradíes, Guillermo; Zarauz, Cristina; Valverde, Arelhys; Ferreiroa, Alberto; Martínez-Rus, Francisco

2015-02-01

The aim of this study was to compare the fit of ceramic crowns fabricated from conventional silicone impressions with the fit of ceramic crowns fabricated from intraoral digital impressions. Twenty-five participants with 30 posterior teeth with a prosthetic demand were selected for the study. Two crowns were made for each preparation. One crown was fabricated from an intraoral digital impression system (IDI group) and the other crown was fabricated from a conventional two-step silicone impression (CI group). To replicate the interface between the crown and the preparation, each crown was cemented on its corresponding clinical preparation with ultra-flow silicone. Each crown was embedded in acrylic resin to stabilise the registered interface and then cut in 2mm thick slices in a buco-lingual orientation. The internal gap was determined as the vertical distance from the internal surface of the crown to the prepared tooth surface at four points (marginal gap, axial gap, crest gap, and occlusal fossa gap) using stereomicroscopy with a magnification of 40×. Data was analysed by using Wilcoxon signed rank test (α=0.05). Internal adaptation values were significantly affected by the impression technique (p=0.001). Mean marginal gap was 76.33 ± 65.32 μm for the crowns of the IDI group and 91.46 ± 72.17 μm for the CI group. All-ceramic crowns fabricated from intraoral digital impressions with wavefront sampling technology demonstrated better internal fit than crowns manufactured from silicone impressions. Impressions obtained from an intraoral digital scanner based on wavefront sampling technology can be used for manufacturing ceramic crowns in the normal clinical practice with better results than conventional impressions with elastomers. Copyright © 2014 Elsevier Ltd. All rights reserved.

International evaluated neutron nuclear data libraries

International Nuclear Information System (INIS)

Liu Tingjin

2001-01-01

The current status of five major evaluated neutron nuclear data libraries in the world are introduced. They are ENDF/B-6 (U. S. A.), JENDL-3.2 (Japan), JEF-2.2 (Europe), CENDL-2.1 (China), BROND-2 (Russia). The developing trend of the international neutron evaluated nuclear data library is discussed. How to get and use these data for the domestic users is given

International evaluation procedure for Supergrants

OpenAIRE

2010-01-01

Sergey Ivanets, director of the department of international integration at the Ministry of Education and Science, talks about the specifics of the evaluation procedures for inviting leading scientists (Decree of the Government of the Russian Federation dated April 9, 2010, N 220: "On Measures for Attracting Leading Scientists into Russian Higher Professional Educational Institutions")

The International Criticality Safety Benchmark Evaluation Project (ICSBEP)

International Nuclear Information System (INIS)

Briggs, J.B.

2003-01-01

The International Criticality Safety Benchmark Evaluation Project (ICSBEP) was initiated in 1992 by the United States Department of Energy. The ICSBEP became an official activity of the Organisation for Economic Cooperation and Development (OECD) - Nuclear Energy Agency (NEA) in 1995. Representatives from the United States, United Kingdom, France, Japan, the Russian Federation, Hungary, Republic of Korea, Slovenia, Yugoslavia, Kazakhstan, Israel, Spain, and Brazil are now participating. The purpose of the ICSBEP is to identify, evaluate, verify, and formally document a comprehensive and internationally peer-reviewed set of criticality safety benchmark data. The work of the ICSBEP is published as an OECD handbook entitled 'International Handbook of Evaluated Criticality Safety Benchmark Experiments.' The 2003 Edition of the Handbook contains benchmark model specifications for 3070 critical or subcritical configurations that are intended for validating computer codes that calculate effective neutron multiplication and for testing basic nuclear data. (author)

Progress of international evaluation cooperation

Energy Technology Data Exchange (ETDEWEB)

Shibata, Keiichi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1998-03-01

The international evaluation cooperation started to remove the differences among major nuclear data libraries such as JENDL, ENDF, and JEF. The results obtained from the cooperation have been used to improve the quality of the libraries. This paper describes the status of the ongoing projects and several remarkable results so far obtained from the projects already finished. (author)

Physical Fitness and Self-Image: An Evaluation of the Exercise Self-Schema Questionnaire Using Direct Measures of Physical Fitness.

Science.gov (United States)

Thomas, Jafra D; Vanness, J Mark; Cardinal, Bradley J

2016-01-01

The purpose of this study was to perform a construct validity assessment of Kendzierski's exercise self-schema theory questionnaire using objective measures of health-related physical fitness. This study tested the hypothesis that individuals with an exercise self-schema would possess significantly greater physical fitness than those who did not across three domains of health-related physical fitness: Body composition, cardiovascular fitness, and upper-body muscular endurance. Undergraduate student participants from one private university on the west coast of the United States completed informed consent forms and the exercise self-schema questionnaire within a classroom setting or at an on-campus outside tabling session. Participants not meeting inclusion criteria for Kendzierski's three original schema groups were categorized as "unschematic," and were included within MANCOVA/ANCOVA analyses, where gender served as the covariate. Participants underwent lab-based fitness assessments administered in accordance with the 2013 American College of Sports Medicine Guidelines for Exercise Testing and Prescription. The hypothesis of this study was partially supported. Specifically, exerciser schematics were significantly leaner than aschematics (p = .002) and they had greater levels of upper-body muscular endurance compared to both aschematic and nonexerciser schematics (p = .002). However, no differences were observed for cardiovascular fitness (i.e., predicted V02Max p = .410). The findings of this study help to establish the construct validity of Kendizerski's self-report exercise self-schema categorization scheme. Visual inspection of the data, as well as computed effect size measures suggest exercise self-schema is associated with dimensions of one's physical fitness.

Evaluation Comparison of Online and Classroom Instruction for HEPE 129--Fitness and Lifestyle Management Course.

Science.gov (United States)

Davies, Randall S.; Mendenhall, Robert

This evaluation compared online (i.e., World Wide Web-based) and classroom instructional delivery methods for the Health Education/Physical Education course, "Fitness and Lifestyle Management," at Brigham Young University (Utah). The results of the study were intended to add to the discussion on the value of web-based courses as a means…

Improving health-related fitness in adolescents: the CrossFit Teens™ randomised controlled trial.

Science.gov (United States)

Eather, Narelle; Morgan, Philip James; Lubans, David Revalds

2016-01-01

The aim of this study was to evaluate the preliminary efficacy and feasibility of the CrossFit Teens™ resistance training programme for improving health-related fitness and resistance training skill competency in adolescents. This assessor-blinded randomised controlled trial was conducted in one secondary school in the Hunter Region, Australia, from July to September 2013. Ninety-six (96) students (age = 15.4 (.5) years, 51.5% female) were randomised into intervention (n = 51) or control (n = 45) conditions for 8-weeks (60 min twice per week). Waist circumference, body mass index (BMI), BMI-Z score (primary outcomes), cardiorespiratory fitness (shuttle run test), muscular fitness (standing jump, push-up, handgrip, curl-up test), flexibility (sit and reach) and resistance training skill competency were measured at baseline and immediate post-intervention. Feasibility measures of recruitment, retention, adherence and satisfaction were assessed. Significant group-by-time intervention effects were found for waist circumference [-3.1 cm, P CrossFit Teens™ is a feasible and efficacious programme for improving health-related fitness in adolescents.

Fit of single tooth zirconia copings: comparison between various manufacturing processes.

Science.gov (United States)

Grenade, Charlotte; Mainjot, Amélie; Vanheusden, Alain

2011-04-01

Various CAD/CAM processes are commercially available to manufacture zirconia copings. Comparative data on their performance in terms of fit are needed. The purpose of this in vitro study was to compare the internal and marginal fit of single tooth zirconia copings manufactured with a CAD/CAM process (Procera; Nobel Biocare) and a mechanized manufacturing process (Ceramill; Amann Girrbach). Abutments (n=20) prepared in vivo for ceramic crowns served as a template for manufacturing both Procera and Ceramill zirconia copings. Copings were manufactured and cemented (Clearfil Esthetic Cement; Kuraray) on epoxy replicas of stone cast abutments. Specimens were sectioned. Nine measurements were performed for each coping. Over- and under-extended margins were evaluated. Comparisons between the 2 processes were performed with a generalized linear mixed model (α=.05). Internal gap values between Procera and Ceramill groups were not significantly different (P=.13). The mean marginal gap (SD) for Procera copings (51(50) μm) was significantly smaller than for Ceramill (81(66) μm) (P<.005). The percentages of over- and under-extended margins were 43% and 57% for Procera respectively, and 71% and 29% for Ceramill. Within the limitations of this in vitro study, the marginal fit of Procera copings was significantly better than that of Ceramill copings. Furthermore, Procera copings showed a smaller percentage of over-extended margins than did Ceramill copings. Copyright © 2011 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Sudomotor Function as a Tool for Cardiorespiratory Fitness Level Evaluation: Comparison with Maximal Exercise Capacity

Directory of Open Access Journals (Sweden)

Anu Raisanen

2014-05-01

Full Text Available Physical inactivity is a modifiable risk factor for cardiovascular (CV and metabolic disorders. VO2max is the best method to assess cardio-respiratory fitness level but it is poorly adopted in clinical practice. Sudomotor dysfunction may develop early in metabolic diseases. This study aimed at comparing established CV risk evaluation techniques with SUDOSCAN; a quick and non-invasive method to assess sudomotor function. A questionnaire was filled-in; physical examination and VO2max estimation using a maximal test on a bicycle ergometer were performed on active Finish workers. Hand and foot electrochemical skin conductance (ESC were measured to assess sudomotor function. Subjects with the lowest fitness level were involved in a 12 month training program with recording of their weekly physical activity and a final fitness level evaluation. Significant differences in BMI; waist and body fat were seen according to SUDOSCAN risk score classification. Correlation between the risk score and estimated VO2max was r = −0.57, p < 0.0001 for women and −0.48, p < 0.0001 for men. A significant increase in estimated VO2max, in hand and foot ESC and in risk score was observed after lifestyle intervention and was more important in subjects with the highest weekly activity. SUDOSCAN could be used to assess cardio-metabolic disease risk status in a working population and to follow individual lifestyle interventions.

International nuclear fuel cycle evaluation (INFCE)

International Nuclear Information System (INIS)

Schlupp, C.

1986-07-01

The study describes and analyzes the structures, the procedures and decision making processes of the International Nuclear Fuel Cycle Evaluation (INFCE). INFCE was agreed by the Organizing Conference to be a technical and analytical study and not a negotiation. The results were to be transmitted to governments for their consideration in developing their nuclear energy policies and in international discussions concerning nuclear energy cooperation and related controls and safeguards. Thus INFCE provided a unique example for decision making by consensus in the nuclear world. It was carried through under mutual respect for each country's choices and decisions, without jeopardizing their respective fuel cycle policies or international co-operation agreements and contracts for the peaceful use of nuclear energy, provided that agreed safeguards are applied. (orig.)

Rules, culture, and fitness.

Science.gov (United States)

Baum, W M

1995-01-01

Behavior analysis risks intellectual isolation unless it integrates its explanations with evolutionary theory. Rule-governed behavior is an example of a topic that requires an evolutionary perspective for a full understanding. A rule may be defined as a verbal discriminative stimulus produced by the behavior of a speaker under the stimulus control of a long-term contingency between the behavior and fitness. As a discriminative stimulus, the rule strengthens listener behavior that is reinforced in the short run by socially mediated contingencies, but which also enters into the long-term contingency that enhances the listener's fitness. The long-term contingency constitutes the global context for the speaker's giving the rule. When a rule is said to be "internalized," the listener's behavior has switched from short- to long-term control. The fitness-enhancing consequences of long-term contingencies are health, resources, relationships, or reproduction. This view ties rules both to evolutionary theory and to culture. Stating a rule is a cultural practice. The practice strengthens, with short-term reinforcement, behavior that usually enhances fitness in the long run. The practice evolves because of its effect on fitness. The standard definition of a rule as a verbal statement that points to a contingency fails to distinguish between a rule and a bargain ("If you'll do X, then I'll do Y"), which signifies only a single short-term contingency that provides mutual reinforcement for speaker and listener. In contrast, the giving and following of a rule ("Dress warmly; it's cold outside") can be understood only by reference also to a contingency providing long-term enhancement of the listener's fitness or the fitness of the listener's genes. Such a perspective may change the way both behavior analysts and evolutionary biologists think about rule-governed behavior.

75 FR 76025 - Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan

Science.gov (United States)

2010-12-07

... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731-TA-376 and 563-564 (Third Review)] Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan AGENCY: United States International... steel butt-weld pipe fittings from Japan, Korea, and Taiwan would be likely to lead to continuation or...

Classification and methodical features of fitness and wellness facilities

Directory of Open Access Journals (Sweden)

Yu. I. Beliak

2014-11-01

Full Text Available Purpose : health and fitness use a large arsenal of different sports and physical activity. Development of fitness industry promotes its expansion and requires classification and methodological features that lead to the use of appropriate fitness programs. Material : more than 60 literature and video of 42 prestigious international fitness - conventions lessons were analyzed. Results : the evolution of species fitness and wellness, as well as the character used in those funds. Conclusions : as a means of improving classification attribute fitness appropriate to use their orientation, according to which they are divided into aerobic, strength exercises that promote flexibility and psychomotor coordination. The main methodological features fitness facilities are highlighted: the variety and interchangeability, clear regulation, the ability to transform, to exercise a selective effect on the body, the ability to solve a wide range of tasks, innovation.

Self-reported physical fitness of older persons : A substitute for performance-based measures of physical fitness?

NARCIS (Netherlands)

vanHeuvelen, MJG; Kempen, GIJM; Ormel, J; de Greef, M.H.G.

1997-01-01

To evaluate the validity of self-report measures of physical fitness as substitutes for performance-based tests, self-reports and performance-based tests of physical fitness were compared. Subjects were a community-based sample of older adults (N = 624) aged 57 and over. The performance-based tests

Complex evaluation of student‘s physical activity by physical health, physical fitness and body composition parameters

OpenAIRE

Šiupšinskas, Laimonas

2007-01-01

Physical activity level of students is decreasing. Students are specific population group with similar patterns of habitual physical activity influenced by study process. That formed requirement to search for a new ways to assess physical activity of the students indirectly. Offered method assesses level of physical health, measures physical fitness and evaluates body composition. The aim of the study is to evaluate indirectly measured health-enhanced physical activity of the students by phys...

Psychometric evaluation of the internalized stigma of mental illness scale for patients with mental illnesses: measurement invariance across time.

Directory of Open Access Journals (Sweden)

Chih-Cheng Chang

Full Text Available BACKGROUND: The current investigation examined the psychometric properties of the Internalized Stigma of Mental Illness (ISMI scale in a sample of patients with mental illness. In addition to the internal consistency, test-retest reliability, and concurrent validity that previous studies have tested for the ISMI, we extended the evaluation to its construct validity and measurement invariance using confirmatory factor analysis (CFA. METHODS: Three hundred forty-seven participants completed two questionnaires (i.e., the ISMI and the Depression and Somatic Symptoms Scale [DSSS], and 162 filled out the ISMI again after 50.23±31.18 days. RESULTS: The results of this study confirmed the frame structure of the ISMI; however, the Stigma Resistance subscale in the ISMI seemed weak. In addition, internal consistency, test-retest reliability, and concurrent validity were all satisfactory for all subscales and the total score of the ISMI, except for Stigma Resistance (α = 0.66; ICC = 0.52, and r = 0.02 to 0.06 with DSSS. Therefore, we hypothesize that Stigma Resistance is a new concept rather than a concept in internalized stigma. The acceptable fit indices supported the measurement invariance of the ISMI across time, and suggested that people with mental illness interpret the ISMI items the same at different times. CONCLUSION: The clinical implication of our finding is that clinicians, when they design interventions, may want to use the valid and reliable ISMI without the Stigma Resistance subscale to evaluate the internalized stigma of people with mental illness.

NUTRITION AND FITNESS: CULTURAL, GENETIC AND METABOLIC ASPECTS

Directory of Open Access Journals (Sweden)

Artemis P. Simopoulos

2008-12-01

Full Text Available Selected Proceedings of the International Congress and Exhibition on Nutrition, Fitness and Health, Shanghai, November 30 to December 2, 2006 The book presents selected papers from the International Congress and Exhibition on Nutrition, Fitness and Health held in Shanghai, China from November 30 to December 2, 2006. PURPOSE This volume is designed to update interested parties on the nutrition and fitness issues from the cultural, genetic and metabolic point of views. FEATURES The book starts with a keynote presentation on nutrition, fitness and the concept of positive health from ancient times to the present. Subsequently papers focusing on the role of omega-3 and omega-6 fatty acids in health and disease follow. Other topics addressed are non-conventional genetic risk factors for cardiovascular disease; the impact of the APO E genotype on health, nutrition and fitness; nutrition in the prevention of chronic disease; and, the connection between exercise and obesity. The formation is concluded by the papers on nutritional risk factors for gastrointestinal cancers, Mediterranean diets as a global resource in health and disease, and the role of politics and politicians on the relevant issues. AUDIENCE Obviously; dieticians, nutritionists, geneticists and exercise physiologists will be interested in these proceedings since the book covers broadly their field. Then again; health care providers, historians, general practitioners and scientists in industry and government might benefit as well. ASSESSMENT It is safe to say that this volume represent a helpful source for anybody who is involved with Nutrition, Fitness and Health in one way or another

A case study evaluation of a Critical Care Information System adoption using the socio-technical and fit approach.

Science.gov (United States)

Yusof, Maryati Mohd

2015-07-01

Clinical information systems have long been used in intensive care units but reports on their adoption and benefits are limited. This study evaluated a Critical Care Information System implementation. A case study summative evaluation was conducted, employing observation, interview, and document analysis in operating theatres and 16-bed adult intensive care units in a 400-bed Malaysian tertiary referral centre from the perspectives of users (nurses and physicians), management, and information technology staff. System implementation, factors influencing adoption, fit between these factors, and the impact of the Critical Care Information System were evaluated after eight months of operation. Positive influences on system adoption were associated with technical factors, including system ease of use, usefulness, and information relevancy; human factors, particularly user attitude; and organisational factors, namely clinical process-technology alignment and champions. Organisational factors such as planning, project management, training, technology support, turnover rate, clinical workload, and communication were barriers to system implementation and use. Recommendations to improve the current system problems were discussed. Most nursing staff positively perceived the system's reduction of documentation and data access time, giving them more time with patients. System acceptance varied among doctors. System use also had positive impacts on timesaving, data quality, and clinical workflow. Critical Care Information Systems is crucial and has great potentials in enhancing and delivering critical care. However, the case study findings showed that the system faced complex challenges and was underutilised despite its potential. The role of socio-technical factors and their fit in realizing the potential of Critical Care Information Systems requires continuous, in-depth evaluation and stakeholder understanding and acknowledgement. The comprehensive and specific evaluation

Spiritual Fitness for Military Veterans: A Curriculum Review and Impact Evaluation Using the Duke Religion Index (DUREL).

Science.gov (United States)

Thomas, Kate H; McDaniel, Justin T; Albright, David L; Fletcher, Kari L; Koenig, Harold G

2018-06-01

Suicide rates among military veterans exceed those found in the general population. While the exact reasons for these high rates are unknown, contributing factors may include the military's perceived rejection of patient identities, creating barriers to mental health care within the clinical sector and a mandate for prevention programs. Spiritual fitness has emerged over the last decade as an important concept in human performance optimization and is included among holistic approaches to developing and maintaining mentally fit fighting forces. In attempts to better understand the role that spiritual fitness and religion play in mitigating and/or reducing suicide risk among veterans, the aims of this study were twofold (1) to assess the utility of the Duke Religion Index as a psychometric instrument for use with veterans completing spiritual fitness training and (2) to offer a post-intervention process evaluation of the spiritual fitness module from one resilience program offered to military veterans of Iraq and Afghanistan in 2016. Twenty-eight attendees at the JRWI Wellness Resilient Leadership Retreat completed post-retreat surveys to assess their satisfaction with the coursework and specifically, to assess the spiritual fitness module of the resiliency retreat's curriculum. In total, the research team reviewed 25 completed post-intervention survey responses (89.3% response rate). Descriptive statistics indicated that respondents (n = 25) were subjectively religious, defined as belief in a higher power practiced in ritualized ways. Over half of program participants indicated they (a) attended religious meetings at least once a week and (b) engaged in private religious activity-such as meditation-at least once a day. Results showed that most program participants reported that the spiritual fitness skills learned during the resilient leadership program were useful (88%) (Z = 3.000, p fitness are indicated for use in veteran outreach and well

Evaluation of the nutrition counselling component of a fitness programme for children with disabilities.

Science.gov (United States)

Fragala-Pinkham, Maria A; Bradford, Laura; Haley, Stephen M

2006-01-01

To describe and evaluate the nutrition counselling component of a fitness programme for children with disabilities. Twenty-eight children with disabilities, ages 6-14 years, participated in a 16-week comprehensive fitness programme consisting of twice weekly exercise sessions, nutrition counselling and physical activity promotion education sessions. Nutrition sessions consisted of three individual and two group sessions. Individual nutrition goals were developed for each child using 3-day food intake diaries and parent interview. Body Mass Index (BMI) and progress towards nutrition goals were documented. No significant BMI changes were recorded for the entire group (n=28) or a sub-group with a goal to decrease BMI (n=8). Most of the children made improvements in individual goals indicating improvements in healthy eating habits. This included eating the daily recommended amount of servings of each food group, trying new foods and limiting foods containing saturated and trans fats, sodium and sugar. Short-term changes were noted in eating habits and behaviours during the 16-week fitness programme, although the effects did not influence overall BMI during the 16-week programme. Children with disabilities are at nutritional risk, and long-term follow-up is needed to determine if initial changes in parent-reported child eating behaviours will impact long-term nutrition, BMI and overall health.

[A better self-perception of physical fitness is associated with lower prevalence of metabolic syndrome and its components among university students].

Science.gov (United States)

Fonseca-Camacho, Deivy Fredery; Hernández-Fonseca, John Manuel; González-Ruíz, Katherine; Tordecilla-Sanders, Alejandra; Ramírez-Vélez, Robinson

2014-12-17

To evaluate whether more positive self-perception of physical fitness is associated with lower prevalence of metabolic syndrome (MetS) and its components in university students in Bogotá, Colombia Method: A total of 493 men (mean age 28.5±11.5 years old) without cardiovascular disease university students completed the self-report fitness tool, namely "The International FItness Scale" (IFIS). The overall prevalence of MetS and its components according to "International Diabetes Federation" (IDF) criteria and the "National Cholesterol Education Program Expert Panel on Detection, Evaluation, and Treatment of High Blood, Cholesterol in Adults" (NCEP: ATP-III) were measured. Body Fat Mass (BFM), Body Fat Percentage (BF %), Fat-Free Mass (FFM) and Fat-Free Mass Index (FFMI), were estimated using segmental bioelectrical impedance equipment. Twenty three percent of participants had met the criteria of MetS. Central obesity (33%) was the most prevalent factor, followed by low HDL cholesterol level (31%). The other factors associated with the presence of MetS were hypercholesterolemia (60%), high LDL cholesterol level (32%) and hypertriglyceridemia (19%). Participants reporting to have a "good/very good" in the self-reported (cardiorespiratory and muscle fitness specific components), shown a healthy range in blood pressure, FFM, FFMI and triglycerides level (p self-perception of physical fitness have an increased prevalence of MetS and its components. This study suggests that the self-report tool used in this study, the IFIS tool, is a useful method to be used in large scale surveys and epidemiological studies in which, because of time, equipment, or qualified personnel limitations, fitness cannot be directly measured. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

MRI EVALUATION OF INTERNAL DERANGEMENT OF KNEE

Directory of Open Access Journals (Sweden)

Ashok Srikar Chowdhary

2018-01-01

Full Text Available BACKGROUND Internal derangement of knee means loss of normal knee function due to ligament or meniscal injuries. MRI is a routinely utilised noninvasive modality for evaluation of various knee disorders including internal derangement. MRI provides excellent soft tissue contrast and multiplanar images when compared to other musculoskeletal imaging modalities. The aim of the study is to study the demographic profile of patients presenting with internal derangement of knee, identify the various ligament and meniscal injuries causing internal derangement of knee and describe the MRI features of the ligament and meniscal injuries. MATERIALS AND METHODS This study was undertaken from January 2016 to mid-December 2017 in the Department of Radiodiagnosis, MVJ Medical College and Research Hospital, Hoskote. The study population consisted of 108 patients with internal derangement of knee who underwent MRI of knee. All the MRI scans of the knee in this study were performed using Siemens Magnetom Essenza (A Tim+Dot system MR machine with a 1.5 tesla field strength magnet using a flex coil. RESULTS The study population consisted of 108 patients comprising of 90 males and 18 females. The age of the patients ranged from 16 to 67 years. Majority of the patients belonged to the age group of 21-30 years constituting about 41% of the total study population. Anterior cruciate ligament injury was the commonest followed by medial and lateral meniscus tears. Flap tear was the commonest type of meniscal tear. Posterior horn of the meniscus was the commonest tear site. CONCLUSION MRI is the investigation of choice in evaluating internal derangement of knee. MRI can accurately diagnose ligament and meniscal injuries and guide arthroscopy.

The Life Cycle CO2 (LCCO2 Evaluation of Retrofits for Water-Saving Fittings

Directory of Open Access Journals (Sweden)

Yasutoshi Shimizu

2013-05-01

Full Text Available As part of measures being taken against global warming, the reduction of CO2 emissions by retrofitting for water-saving fittings in homes is spreading throughout the world. However, although this retrofitting reduces the environmental impact at the use stage, it generates new impacts at the production and disposal stages. In addition, there has been little research that discusses the reduction in environmental impact obtained by retrofitting from the viewpoint of the overall life cycle of such fittings. In this paper, an evaluation of the environmental impact of retrofitting in terms of the entire life cycle was carried out for toilet bowls and showerheads. The findings show that even for a toilet bowl that generates a large environmental load at the production stage, there is no overall increase in the environmental impact by retrofitting for the average usable life of 20 years.

Improving health-related fitness in children: the fit-4-Fun randomized controlled trial study protocol

Directory of Open Access Journals (Sweden)

Eather Narelle

2011-12-01

Full Text Available Abstract Background Declining levels of physical fitness in children are linked to an increased risk of developing poor physical and mental health. Physical activity programs for children that involve regular high intensity physical activity, along with muscle and bone strengthening activities, have been identified by the World Health Organisation as a key strategy to reduce the escalating burden of ill health caused by non-communicable diseases. This paper reports the rationale and methods for a school-based intervention designed to improve physical fitness and physical activity levels of Grades 5 and 6 primary school children. Methods/Design Fit-4-Fun is an 8-week multi-component school-based health-related fitness education intervention and will be evaluated using a group randomized controlled trial. Primary schools from the Hunter Region in NSW, Australia, will be invited to participate in the program in 2011 with a target sample size of 128 primary schools children (age 10-13. The Fit-4-Fun program is theoretically grounded and will be implemented applying the Health Promoting Schools framework. Students will participate in weekly curriculum-based health and physical education lessons, daily break-time physical activities during recess and lunch, and will complete an 8-week (3 × per week home activity program with their parents and/or family members. A battery of six health-related fitness assessments, four days of pedometery-assessed physical activity and a questionnaire, will be administered at baseline, immediate post-intervention (2-months and at 6-months (from baseline to determine intervention effects. Details of the methodological aspects of recruitment, inclusion criteria, randomization, intervention program, assessments, process evaluation and statistical analyses are described. Discussion The Fit-4-Fun program is an innovative school-based intervention targeting fitness improvements in primary school children. The program will

Improving health-related fitness in children: the Fit-4-Fun randomized controlled trial study protocol.

Science.gov (United States)

Eather, Narelle; Morgan, Philip J; Lubans, David R

2011-12-05

Declining levels of physical fitness in children are linked to an increased risk of developing poor physical and mental health. Physical activity programs for children that involve regular high intensity physical activity, along with muscle and bone strengthening activities, have been identified by the World Health Organisation as a key strategy to reduce the escalating burden of ill health caused by non-communicable diseases. This paper reports the rationale and methods for a school-based intervention designed to improve physical fitness and physical activity levels of Grades 5 and 6 primary school children. Fit-4-Fun is an 8-week multi-component school-based health-related fitness education intervention and will be evaluated using a group randomized controlled trial. Primary schools from the Hunter Region in NSW, Australia, will be invited to participate in the program in 2011 with a target sample size of 128 primary schools children (age 10-13). The Fit-4-Fun program is theoretically grounded and will be implemented applying the Health Promoting Schools framework. Students will participate in weekly curriculum-based health and physical education lessons, daily break-time physical activities during recess and lunch, and will complete an 8-week (3 × per week) home activity program with their parents and/or family members. A battery of six health-related fitness assessments, four days of pedometery-assessed physical activity and a questionnaire, will be administered at baseline, immediate post-intervention (2-months) and at 6-months (from baseline) to determine intervention effects. Details of the methodological aspects of recruitment, inclusion criteria, randomization, intervention program, assessments, process evaluation and statistical analyses are described. The Fit-4-Fun program is an innovative school-based intervention targeting fitness improvements in primary school children. The program will involve a range of evidence-based behaviour change strategies to

Nuclear data standards - International Evaluation Co-operation volume 7

International Nuclear Information System (INIS)

Carlson, A.D.; Shibata, K.; Vonach, H.; Hambsch, F.J.; Chen, Z.; Hofmann, H.M.; Oh, S.Y.; Badikov, S.A.; Gai, E.V.; Pronyaev, V.G.; Smith, D.L.; Hale, G.M.; Kawano, T.; Larson, N.M.

2006-01-01

A Working Party on International Evaluation Co-operation was established under the sponsorship of the OECD/NEA Nuclear Science Committee (NSC) to promote the exchange of information on nuclear data evaluations, validation and related topics. Its aim is also to provide a framework for co-operative activities between members of the major nuclear data evaluation projects. This includes the possible exchange of scientists in order to encourage co-operation. Requirements for experimental data resulting from this activity are compiled. The working party determines common criteria for evaluated nuclear data files with a view to assessing and improving the quality and completeness of evaluated data. The parties to the project are: ENDF (United States), JEFF/EFF (NEA Data Bank member countries) and JENDL (Japan). Co-operation with evaluation projects of non-OECD countries is organised through the Nuclear Data Section of the International Atomic Energy Agency (IAEA). This report was issued by Subgroup 7, which was in charge of producing new evaluated neutron cross-section standards. When starting the project, there was a general consensus on the need to update these standards, as significant improvements had been made to the experimental database since 1991 when the last evaluation of these standards was performed. The present work was accomplished through efficient collaboration between a task force of the US Cross-section Evaluation Working Group (CSEWG), a Co-ordinated Research Project (CRP) of the International Atomic Energy Agency (IAEA) and Subgroup 7 of the Working Party on International Evaluation Co-operation (WPEC) of the NEA Nuclear Science Committee. Work is reported on the results of an international effort to evaluate the neutron cross-section standards. The evaluations include the H(n,n), 6 Li(n,t), 10 B(n,α), 10 B(n,α1γ), 197 Au(n,γ), 235 U(n,f) and 238 U(n,f) standard reactions. Evaluations were also produced for the non-standard 238 U(n,γ) and 239 Pu

Ontological knowledge engine and health screening data enabled ubiquitous personalized physical fitness (UFIT).

Science.gov (United States)

Su, Chuan-Jun; Chiang, Chang-Yu; Chih, Meng-Chun

2014-03-07

Good physical fitness generally makes the body less prone to common diseases. A personalized exercise plan that promotes a balanced approach to fitness helps promotes fitness, while inappropriate forms of exercise can have adverse consequences for health. This paper aims to develop an ontology-driven knowledge-based system for generating custom-designed exercise plans based on a user's profile and health status, incorporating international standard Health Level Seven International (HL7) data on physical fitness and health screening. The generated plan exposing Representational State Transfer (REST) style web services which can be accessed from any Internet-enabled device and deployed in cloud computing environments. To ensure the practicality of the generated exercise plans, encapsulated knowledge used as a basis for inference in the system is acquired from domain experts. The proposed Ubiquitous Exercise Plan Generation for Personalized Physical Fitness (UFIT) will not only improve health-related fitness through generating personalized exercise plans, but also aid users in avoiding inappropriate work outs.

Alternative Forms of Fit in Contingency Theory.

Science.gov (United States)

Drazin, Robert; Van de Ven, Andrew H.

1985-01-01

This paper examines the selection, interaction, and systems approaches to fit in structural contingency theory. The concepts of fit evaluated may be applied not only to structural contingency theory but to contingency theories in general. (MD)

INVESTIGATION THE FITTING ACCURACY OF CAST AND SLM CO-CR DENTAL BRIDGES USING CAD SOFTWARE

Directory of Open Access Journals (Sweden)

Tsanka Dikova

2017-09-01

Full Text Available The aim of the present paper is to investigate the fitting accuracy of Co-Cr dental bridges, manufactured by three technologies, with the newly developed method using CAD software. The four-part dental bridges of Co-Cr alloys were produced by conventional casting of wax models, casting with 3D printed patterns and selective laser melting. The marginal and internal fit of dental bridges was studied out by two methods – silicone replica test and CAD software. As the silicone replica test characterizes with comparatively low accuracy, a new methodology for investigating the fitting accuracy of dental bridges was developed based on the SolidWorks CAD software. The newly developed method allows the study of the marginal and internal adaptation in unlimited directions and high accuracy. Investigation the marginal fit and internal adaptation of Co-Cr four-part dental bridges by the two methods show that the technological process strongly influences the fitting accuracy of dental restorations. The fitting accuracy of the bridges, cast with 3D printed patterns, is the highest, followed by the SLM and conventionally cast bridges. The marginal fit of the three groups of bridges is in the clinically acceptable range. The internal gap values vary in different regions – it is highest on the occlusal surfaces, followed by that in the marginal and axial areas. The higher fitting accuracy of the bridges, manufactured by casting with 3D printed patterns and SLM, compared to the conventionally cast bridges is a good precondition for their successful implementation in the dental offices and laboratories.

Body mass index and physical fitness in Brazilian adolescents.

Science.gov (United States)

Lopes, Vitor P; Malina, Robert M; Gomez-Campos, Rossana; Cossio-Bolaños, Marco; Arruda, Miguel de; Hobold, Edilson

2018-05-05

Evaluate the relationship between body mass index and physical fitness in a cross-sectional sample of Brazilian youth. Participants were 3849 adolescents (2027 girls) aged 10-17 years. Weight and height were measured; body mass index was calculated. Physical fitness was evaluated with a multistage 20m shuttle run (cardiovascular endurance), standing long jump (power), and push-ups (upper body strength). Participants were grouped by sex into four age groups: 10-11, 12-13, 14-15, and 16-17 years. Sex-specific ANOVA was used to evaluate differences in each physical fitness item among weight status categories by age group. Relationships between body mass index and each physical fitness item were evaluated with quadratic regression models by age group within each sex. The physical fitness of thin and normal youth was, with few exceptions, significantly better than the physical fitness of overweight and obese youth in each age group by sex. On the other hand, physical fitness performances did not consistently differ, on average, between thin and normal weight and between overweight and obese youths. Results of the quadratic regressions indicated a curvilinear (parabolic) relationship between body mass index and each physical fitness item in most age groups. Better performances were attained by adolescents in the mid-range of the body mass index distribution, while performances of youth at the low and high ends of the body mass index distribution were lower. Relationships between the body mass index and physical fitness were generally nonlinear (parabolic) in youth 10-17 years. Copyright © 2018 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

Evaluation Survivor: How to Outwit, Outplay, and Outlast as an Internal Government Evaluator

Science.gov (United States)

Kniker, Ted

2011-01-01

This chapter describes the author's experience and insights as the chief of evaluation for public diplomacy at the U.S. Department of State, and as a consultant assisting federal agencies in a multitude of evaluation activities relating what helps and hinders internal evaluation functions. The article discusses the challenges faced by the internal…

Evaluation of the International Outcome Inventory for Hearing Aids in a veteran sample.

Science.gov (United States)

Smith, Sherri L; Noe, Colleen M; Alexander, Genevieve C

2009-06-01

The International Outcome Inventory for Hearing Aids (IOI-HA) was developed as a global hearing aid outcome measure targeting seven outcome domains. The published norms were based on a private-pay sample who were fitted with analog hearing aids. The purpose of this study was to evaluate the psychometric properties of the IOI-HA and to establish normative data in a veteran sample. Survey. The participants were 131 male veterans (mean age of 74.3 years, SD = 7.4) who were issued hearing aids with digital signal processing (DSP). Hearing aids with DSP that were fitted bilaterally between 2005 and 2007. Veterans were mailed two copies of the IOI-HA. The participants were instructed to complete the first copy of the questionnaire immediately and the second copy in two weeks. The completed questionnaires were mailed to the laboratory. The psychometric properties of the questionnaire were evaluated. As suggested by Cox and colleagues, the participants were divided into two categories based on their unaided subjective hearing difficulty. The two categories were (1) those with less hearing difficulty (none-to-moderate category) and (2) those who report more hearing difficulty (moderately severe+ category). The norms from the current veteran sample then were compared to the original, published sample. For each hearing difficulty category, the critical difference values were calculated for each item and for the total score. A factor analysis showed that the IOI-HA in the veteran sample had the identical subscale structure as reported in the original sample. For the total scale, the internal consistency was good (Chronbach's alpha = 0.83), and the test-retest reliability was high (lambda = 0.94). Group and individual norms were developed for both hearing difficulty categories in the veteran sample. For each IOI-HA item, the critical difference scores were one response unit between two test sessions reflects a true change in outcome for a given domain. The results of this study

Is High-Intensity Functional Training (HIFT)/CrossFit Safe for Military Fitness Training?

Science.gov (United States)

Poston, Walker S C; Haddock, Christopher K; Heinrich, Katie M; Jahnke, Sara A; Jitnarin, Nattinee; Batchelor, David B

2016-07-01

High-intensity functional training (HIFT) is a promising fitness paradigm that gained popularity among military populations. Rather than biasing workouts toward maximizing fitness domains such as aerobic endurance, HIFT workouts are designed to promote general physical preparedness. HIFT programs have proliferated as a result of concerns about the relevance of traditional physical training (PT), which historically focused on aerobic condition via running. Other concerns about traditional PT include: (1) the relevance of service fitness tests given current combat demands, (2) the perception that military PT is geared toward passing service fitness tests, and (3) that training for combat requires more than just aerobic endurance. Despite its' popularity in the military, concerns have been raised about HIFT's injury potential, leading to some approaches being labeled as "extreme conditioning programs" by several military and civilian experts. Given HIFT programs' popularity in the military and concerns about injury, a review of data on HIFT injury potential is needed to inform military policy. The purpose of this review is to: (1) provide an overview of scientific methods used to appropriately compare injury rates among fitness activities and (2) evaluate scientific data regarding HIFT injury risk compared to traditional military PT and other accepted fitness activities. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

Have the auditors closed the expectation gap concerning evaluation of internal control?

DEFF Research Database (Denmark)

Birkholm, Peter; Holm, Claus

internal controls intended for management directors, it provides a framework which explicitly deals with the interests of all parties involved (including auditors, board of directors and regulating bodies). The auditors took this into account by updating the particular auditing standard on internal control....... Realized discrepancies are identified and related to the necessary features of an integrated framework. The necessary features include (1) the definition of internal controls, (2) the components of internal control, (3) the criteria for evaluating internal control as stated by the auditors (4) the criteria...... for evaluating internal controls as stated by management, and (5) the integration of internal control evaluations from management and auditors. The paper provides evidence from an in-depth contents analysis comparing SAS No. 55 from 1988 with the COSO-report from 1992 and SAS No. 78 from 1995. The analysis...

Users' intention to continue using social fitness-tracking apps: expectation confirmation theory and social comparison theory perspective.

Science.gov (United States)

Li, Jia; Liu, Xuan; Ma, Ling; Zhang, Weiqiang

2018-03-05

The key step in changing health behavior is understanding why users continue to use fitness apps. Therefore, we intend to investigate the users' intention to continue using social fitness-tracking apps. We identify two major forces driving continuous behavior. Expectation confirmation is the internal driving force and social comparison is the external driving force. A survey was conducted to test this proposed research model. We obtained 211 valid questionnaires. Our results indicate that activity amount ranking (p fitness-tracking apps. In addition, the impact of activity amount ranking and activity frequency ranking on continuous intention is moderated by expectation confirmation. Meanwhile, as the upward comparison tendency increases, the positive effect of confirmation on continuous intention decreases (p Social rank expectation and confirmation are the primary driving forces of continuous intention in individuals using fitness-tracking apps. Social rank is a meaningful and straightforward measurement individuals can use to evaluate their activity performance. An upward comparison tendency weakens the effect of confirmation on continuous intention.

Age-related decrease in physical activity and functional fitness among elderly men and women.

Science.gov (United States)

Milanović, Zoran; Pantelić, Saša; Trajković, Nebojša; Sporiš, Goran; Kostić, Radmila; James, Nic

2013-01-01

To determine differences in physical activity level and functional fitness between young elderly (60-69 years) and old elderly (70-80 years) people with the hypothesis that an age-related decline would be found. A total of 1288 participants' level of physical activity was evaluated using the International Physical Activity Questionnaire: 594 were male (mean ± standard deviation: body height 175.62 ± 9.78 cm; body weight 82.26 ± 31.33 kg) and 694 female (mean ± standard deviation: body height 165.17 ± 23.12 cm; body weight 69.74 ± 12.44 kg). Functional fitness was also estimated using the Senior Fitness Test: back scratch, chair sit and reach, 8-foot up and go, chair stand up for 30 seconds, arm curl, and 2-minute step test. Significant differences (P men. Similar results were found for the women, except no significant differences were found for the chair sit and reach and the 2-minute step test. From the viewpoint of energy consumption estimated by the International Physical Activity Questionnaire, moderate physical activity is dominant. In addition, with aging, among men and women older than 60 years, the value of the Metabolic Equivalent of Task in total physical activity significantly reduces (P physical activity level and functional fitness was equal for both men and women and was due to the aging process. These differences between young and old elderly people were due to the reduction of muscle strength in both upper and lower limbs and changes in body-fat percentage, flexibility, agility, and endurance.

Model fit versus biological relevance: Evaluating photosynthesis-temperature models for three tropical seagrass species.

Science.gov (United States)

Adams, Matthew P; Collier, Catherine J; Uthicke, Sven; Ow, Yan X; Langlois, Lucas; O'Brien, Katherine R

2017-01-04

When several models can describe a biological process, the equation that best fits the data is typically considered the best. However, models are most useful when they also possess biologically-meaningful parameters. In particular, model parameters should be stable, physically interpretable, and transferable to other contexts, e.g. for direct indication of system state, or usage in other model types. As an example of implementing these recommended requirements for model parameters, we evaluated twelve published empirical models for temperature-dependent tropical seagrass photosynthesis, based on two criteria: (1) goodness of fit, and (2) how easily biologically-meaningful parameters can be obtained. All models were formulated in terms of parameters characterising the thermal optimum (T opt ) for maximum photosynthetic rate (P max ). These parameters indicate the upper thermal limits of seagrass photosynthetic capacity, and hence can be used to assess the vulnerability of seagrass to temperature change. Our study exemplifies an approach to model selection which optimises the usefulness of empirical models for both modellers and ecologists alike.

Model fit versus biological relevance: Evaluating photosynthesis-temperature models for three tropical seagrass species

Science.gov (United States)

Adams, Matthew P.; Collier, Catherine J.; Uthicke, Sven; Ow, Yan X.; Langlois, Lucas; O'Brien, Katherine R.

2017-01-01

When several models can describe a biological process, the equation that best fits the data is typically considered the best. However, models are most useful when they also possess biologically-meaningful parameters. In particular, model parameters should be stable, physically interpretable, and transferable to other contexts, e.g. for direct indication of system state, or usage in other model types. As an example of implementing these recommended requirements for model parameters, we evaluated twelve published empirical models for temperature-dependent tropical seagrass photosynthesis, based on two criteria: (1) goodness of fit, and (2) how easily biologically-meaningful parameters can be obtained. All models were formulated in terms of parameters characterising the thermal optimum (Topt) for maximum photosynthetic rate (Pmax). These parameters indicate the upper thermal limits of seagrass photosynthetic capacity, and hence can be used to assess the vulnerability of seagrass to temperature change. Our study exemplifies an approach to model selection which optimises the usefulness of empirical models for both modellers and ecologists alike.

International co-operation in nuclear data evaluation

International Nuclear Information System (INIS)

Nordborg, C.

2003-01-01

The NEA Working Party on International Nuclear Data Evaluation Co-operation serves as a forum for the exchange of information on required improvements to evaluated nuclear data libraries used in all nuclear application areas. The main objective is to identify the major discrepancies in existing evaluated data libraries and to resolve these discrepancies in specifically established expert groups. The long-term goal is to have converging evaluated data libraries. This co-operative effort is very successful. It has resolved a number of outstanding nuclear data problems and has issued 15 reports in support of the studies undertaken jointly. (author)

The Many Null Distributions of Person Fit Indices.

Science.gov (United States)

Molenaar, Ivo W.; Hoijtink, Herbert

1990-01-01

Statistical properties of person fit indices are reviewed as indicators of the extent to which a person's score pattern is in agreement with a measurement model. Distribution of a fit index and ability-free fit evaluation are discussed. The null distribution was simulated for a test of 20 items. (SLD)

Fitness

Science.gov (United States)

... gov home http://www.girlshealth.gov/ Home Fitness Fitness Want to look and feel your best? Physical ... are? Check out this info: What is physical fitness? top Physical fitness means you can do everyday ...

Program Officer, Monitoring and Evaluation | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

S/he manages a quality assessment process for evaluation reports and track ... and budget information in order to contribute to an effective internal control of project ... documentary and literature reviews, and statistical and content analyses to ...

Evaluating Internal Communication: The ICA Communication Audit.

Science.gov (United States)

Goldhaber, Gerald M.

1978-01-01

The ICA Communication Audit is described in detail as an effective measurement procedure that can help an academic institution to evaluate its internal communication system. Tools, computer programs, analysis, and feedback procedures are described and illustrated. (JMF)

Push-off tests and strength evaluation of joints combining shrink fitting with bonding

Science.gov (United States)

Yoneno, Masahiro; Sawa, Toshiyuki; Shimotakahara, Ken; Motegi, Yoichi

1997-03-01

Shrink fitted joints have been used in mechanical structures. Recently, joints combining shrink fitting with anaerobic adhesives bonded between the shrink fitted surfaces have been appeared in order to increase the joint strength. In this paper, push-off test was carried out on strength of joints combining shrink fitting with bonding by material testing machine. In addition, the push-off strength of shrink fitting joints without an anaerobic adhesive was also measured. In the experiments, the effects of the shrinking allowance and the outer diameter of the rings on the joint strength are examined. The interface stress distribution in bonded shrink fitted joints subjected to a push-off load is analyzed using axisymmetrical theory of elasticity as a four-body contact problem. Using the interface stress distribution, a method for estimating joint strength is proposed. The experimental results are in a fairly good agreement with the numerical results. It is found that the strength of combination joints is greater than that of shrink fitted joints.

[Influence of coping material selection and porcelain firing on marginal and internal fit of computer-aided design/computer- aided manufacturing of zirconia and titanium ceramic implant-supported crowns].

Science.gov (United States)

Cuiling, Liu; Liyuan, Yang; Xu, Gao; Hong, Shang

2016-06-01

This study aimed to investigate the influence of coping material and porcelain firing on the marginal and internal fit of computer-aided design/computer-aided manufacturing (CAD/CAM) of zirconia ceramic implant- and titanium ceramic implant-supported crowns. Zirconia ceramic implant (group A, n = 8) and titanium metal ceramic implant-supported crowns (group B, n = 8) were produced from copings using the CAD/CAM system. The marginal and internal gaps of the copings and crowns were measured by using a light-body silicone replica technique combined with micro-computed tomography scanning to obtain a three-dimensional image. Marginal gap (MG), horizontal marginal discrepancy (HMD), and axial wall (AW) were measured. Statistical analyses were performed using SPSS 17.0. Prior to porcelain firing, the measurements for MG, HMD, and AW of copings in group A were significantly larger than those in group B (P 0.05). Porcelain firing significantly reduced MG (P 0.05). The marginal fits of CAD/CAM zirconia ceramic implant-supported crowns were superior to those of CAD/CAM titanium ceramic-supported crowns. The fits of both the CAD/CAM zirconia ceramic implant- and titanium ceramic implant-supported crowns were obviously influenced by porcelain firing.

Subjective and objective evaluation of one’s physical fitness – the role of self-esteem, motivation, and the need for social approval

Directory of Open Access Journals (Sweden)

Agata Piasecka

2018-01-01

Full Text Available Introduction and purpose of the work: Physical fitness is an important aspect of human life that can have an impact on biological, social, and psychological functioning. The aim of the research was to compare students who were engaged and those who were not engaged in sport in terms of self-evaluation of own physical fitness and performance in the Functional Movement ScreenTM. The analyses also included the role of motivation, self-esteem, and the need for social approval. Material and method: The participants of the study were students who do sports (n = 30 and those who are not engaged in a sport activity (n = 30 at one Polish university (aged 18-24 years, Mage = 21,23; SD = 1,5. The following instruments were used in the research: Self-Esteem Scale (SES, Social Approval Test (TAS-27, Sport Motivation Scale-II (SMS-II, Functional Movement ScreenTM (FMSTM, Survey about own physical fitness and sport related information.Results: The results revealed that active and inactive students differed in the subjective scores in the FMSTM and evaluation of own physical fitness. However, in both groups similar scores in self-esteem and the need for social approval were present. Subjective evaluation (made by the subjects of own performance in the FMSTM was rated lower than objective one (made by the researchers in both groups. The FMSTM scores (both objective and subjective were related to different types of motivation. The lowest mean values were noted for external motivation and amotivation. Conclusions: The research has shown differences, in evaluation of physical fitness and FMSTM score - which can inform about the risk of potential injury - between the students who were engaged and those who were not engaged in sport. Motivation, need for social approval and self-esteem were mutually related. They can play an important role in shaping the belief about one's physical fitness and the effect of one's performance, although further investigations are

Hamiltonian inclusive fitness: a fitter fitness concept.

Science.gov (United States)

Costa, James T

2013-01-01

In 1963-1964 W. D. Hamilton introduced the concept of inclusive fitness, the only significant elaboration of Darwinian fitness since the nineteenth century. I discuss the origin of the modern fitness concept, providing context for Hamilton's discovery of inclusive fitness in relation to the puzzle of altruism. While fitness conceptually originates with Darwin, the term itself stems from Spencer and crystallized quantitatively in the early twentieth century. Hamiltonian inclusive fitness, with Price's reformulation, provided the solution to Darwin's 'special difficulty'-the evolution of caste polymorphism and sterility in social insects. Hamilton further explored the roles of inclusive fitness and reciprocation to tackle Darwin's other difficulty, the evolution of human altruism. The heuristically powerful inclusive fitness concept ramified over the past 50 years: the number and diversity of 'offspring ideas' that it has engendered render it a fitter fitness concept, one that Darwin would have appreciated.

Evaluation of Fitness and the Balance Levels of Children with a Diagnosis of Juvenile Idiopathic Arthritis: A Pilot Study.

Science.gov (United States)

Patti, Antonino; Maggio, Maria Cristina; Corsello, Giovanni; Messina, Giuseppe; Iovane, Angelo; Palma, Antonio

2017-07-19

Background: Juvenile idiopathic arthritis is a main cause of physical disability and has high economic costs for society. The purpose of this study was to assess the fitness levels and the postural and balance deficits with a specific test battery. Methods: Fifty-six subjects were enrolled in this study. Thirty-nine healthy subjects were included in the control group and seventeen in the juvenile idiopathic arthritis group. All subjects were evaluated using a posturography system. The fitness level was evaluated with a battery of tests (Abalakov test, sit-up test, hand grip test, backsaver sit and reach, the toe touch test). An unpaired t -test was used to determine differences. Pearson's correlation coefficient was used to evaluate the correlation between the tests. Results: The battery of tests demonstrated that subjects in the juvenile idiopathic arthritis group have lower fitness levels compared to the control group. The juvenile idiopathic arthritis group showed low postural control with respect to the control group. Pearson analysis of the juvenile idiopathic arthritis group data showed significant correlations between variables. Pearson's results from the control group data showed a similar trend. Conclusions: The results suggest that the battery of tests used could be an appropriate tool. However, we highlight that these conclusions need to be supported by other studies with a larger population scale.

Evaluating the factor structure, item analyses, and internal consistency of hospital anxiety and depression scale in Iranian infertile patients

Directory of Open Access Journals (Sweden)

Payam Amini

2017-09-01

Full Text Available Background: The hospital anxiety and depression scale (HADS is a common screening tool designed to measure the level of anxiety and depression in different factor structures and has been extensively used in non-psychiatric populations and individuals experiencing fertility problems. Objective: The aims of this study were to evaluate the factor structure, item analyses, and internal consistency of HADS in Iranian infertile patients. Materials and Methods: This cross-sectional study included 651 infertile patients (248 men and 403 women referred to a referral infertility Center in Tehran, Iran between January 2014 and January 2015. Confirmatory factor analysis was used to determine the underlying factor structure of the HADS among one, two, and threefactor models. Several goodness of fit indices were utilized such as comparative, normed and goodness of fit indices, Akaike information criterion, and the root mean squared error of approximation. In addition to HADS, the Satisfaction with Life Scale questionnaires as well as demographic and clinical information were administered to all patients. Results: The goodness of fit indices through CFAs exposed that three and onefactor model provided the best and worst fit to the total, male and female datasets compared to the other factor structure models for the infertile patients. The Cronbach’s alpha for anxiety and depression subscales were 0.866 and 0.753 respectively. The HADS subscales significantly correlated with SWLS, indicating an acceptable convergent validity. Conclusion: The HADS was found to be a three-factor structure screening instrument in the field of infertility.

Systematization of the Methods for Evaluating the International Competitiveness of Enterprise

Directory of Open Access Journals (Sweden)

Shtal Tetyana V.

2016-01-01

Full Text Available The article is aimed at studying methods for evaluating competitiveness, identifying their practical relevance to domestic enterprises on example of the ОАО «Zavod «Yuzhkabel». A system of methods for evaluating international competitiveness of enterprises has been analyzed, the most frequently encountered in the economic literature methodologies for estimation have been considered. As a result, weaknesses of the individual elements of the system have been identified. Practical significance of the study has been disclosed, the most effective methods for evaluating the international competitiveness of enterprises have been identified. Using methods such as the method of rating estimation, the «4Р» matrix, the «McKinsey» matrix, the HirfindahlHirschman index and the polygon of competitiveness model, international competitiveness of the ОАО «Zavod «Yuzhkabel» has been evaluated. Conclusion about the extent of enterprise's presence at the international market has been made.

When the model fits the frame: the impact of regulatory fit on efficacy appraisal and persuasion in health communication.

Science.gov (United States)

Bosone, Lucia; Martinez, Frédéric; Kalampalikis, Nikos

2015-04-01

In health-promotional campaigns, positive and negative role models can be deployed to illustrate the benefits or costs of certain behaviors. The main purpose of this article is to investigate why, how, and when exposure to role models strengthens the persuasiveness of a message, according to regulatory fit theory. We argue that exposure to a positive versus a negative model activates individuals' goals toward promotion rather than prevention. By means of two experiments, we demonstrate that high levels of persuasion occur when a message advertising healthy dietary habits offers a regulatory fit between its framing and the described role model. Our data also establish that the effects of such internal regulatory fit by vicarious experience depend on individuals' perceptions of response-efficacy and self-efficacy. Our findings constitute a significant theoretical complement to previous research on regulatory fit and contain valuable practical implications for health-promotional campaigns. © 2015 by the Society for Personality and Social Psychology, Inc.

Measurement of the internal organs' absorption and extracorporeal excretion of radioactive iodine fit to the characteristics of Koreans

International Nuclear Information System (INIS)

Kim, Jung Hoon; Kim, Tae Man; Whang, Joo Ho

2005-01-01

Radiation dosimetry will prove helpful to active approaches, such as limiting the amount of radiation exposure, which can be called the negative effect of radiation on the body, or using radiation to treat diseases. Defective nuclear fuel at a nuclear power plant or 131 I used for oral thyroid gland examination and treatment of cancer may cause internal exposure during the replacement of nuclear fuel, or maintenance. Also, it is reported that, clinically, 131 I has the negative function of increasing the radiation exposure of the other organs as well as the positive function related to thyroid gland diagnosis and cancer treatment. Estimation of internal exposure to 131 I must take the physical properties of 131 I and the physiological properties of individuals into account. The extracorporeal excretion rate of radionuclides and the proportion remaining in the body may vary depending on the physiological properties of the Oriental and Occidental people. The existing physiological properties are data originating from Westerners, so if the data are applied to Koreans, differences in dietary life and physiological properties may lead to underestimation or overestimation of internal exposure. Therefore, this study aims at measuring the radionuclide absorption and excretion rates in human organs to establish the physiological radionuclide metabolism fit to Koreans and the Oriental people whose physique is similar to that of Koreans

Body composition and physical fitness in women with bulimia nervosa or binge-eating disorder.

Science.gov (United States)

Mathisen, Therese Fostervold; Rosenvinge, Jan H; Friborg, Oddgeir; Pettersen, Gunn; Stensrud, Trine; Hansen, Bjørge Herman; Underhaug, Karoline E; Teinung, Elisabeth; Vrabel, KariAnne; Svendsen, Mette; Bratland-Sanda, Solfrid; Sundgot-Borgen, Jorunn

2018-04-01

Knowledge about physical fitness in women with bulimia nervosa (BN) or binge-eating disorder (BED) is sparse. Previous studies have measured physical activity largely through self-report, and physical fitness variables are mainly restricted to body mass index (BMI) and bone mineral density. We expanded the current knowledge in these groups by including a wider range of physical fitness indicators and objective measures of physical activity, assessed the influence of a history of anorexia nervosa (AN), and evaluated predictive variables for physical fitness. Physical activity, blood pressure, cardiorespiratory fitness (CRF), muscle strength, body composition, and bone mineral density were measured in 156 women with BN or BED, with mean (SD) age 28.4 years (5.7) and BMI 25.3 (4.8) kg m -2 . Level of physical activity was higher than normative levels, still <50% met the official physical activity recommendation. Fitness in women with BN were on an average comparable with recommendations or normative levels, while women with BED had lower CRF and higher BMI, VAT, and body fat percentage. We found 10-12% with masked obesity. A history of AN did not predict current physical fitness, still values for current body composition were lower when comparing those with history of AN to those with no such history. Overall, participants with BN or BED displayed adequate physical fitness; however, a high number had unfavorable CRF and body composition. This finding calls for inclusion of physical fitness in routine clinical examinations and guided physical activity and dietary recommendations in the treatment of BN and BED. © 2018 The Authors International Journal of Eating Disorders Published by Wiley Periodicals, Inc.

An Improved Fitness Evaluation Mechanism with Memory in Spatial Prisoner's Dilemma Game on Regular Lattices

International Nuclear Information System (INIS)

Wang Juan; Liu Li-Na; Dong En-Zeng; Wang Li

2013-01-01

To deeply understand the emergence of cooperation in natural, social and economical systems, we present an improved fitness evaluation mechanism with memory in spatial prisoner's dilemma game on regular lattices. In our model, the individual fitness is not only determined by the payoff in the current game round, but also by the payoffs in previous round bins. A tunable parameter, termed as the memory strength (μ), which lies between 0 and 1, is introduced into the model to regulate the ratio of payoffs of current and previous game rounds in the individual fitness calculation. When μ = 0, our model is reduced to the standard prisoner's dilemma game; while μ = 1 represents the case in which the payoff is totally determined by the initial strategies and thus it is far from the realistic ones. Extensive numerical simulations indicate that the memory effect can substantially promote the evolution of cooperation. For μ < 1, the stronger the memory effect, the higher the cooperation level, but μ = 1 leads to a pathological state of cooperation, but can partially enhance the cooperation in the very large temptation parameter. The current results are of great significance for us to account for the role of memory effect during the evolution of cooperation among selfish players. (general)

75 FR 53714 - Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan

Science.gov (United States)

2010-09-01

...)] Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan AGENCY: United States International... stainless steel butt-weld pipe fittings from Japan, Korea, and Taiwan. SUMMARY: The Commission hereby gives... butt-weld pipe fittings from Japan, Korea, and Taiwan would be likely to lead to continuation or...

An Epidemiological Profile of CrossFit Athletes in Brazil

OpenAIRE

Sprey, Jan W.C.; Ferreira, Thiago; de Lima, Marcos V.; Duarte, Aires; Jorge, Pedro B.; Santili, Claudio

2016-01-01

Background: CrossFit is a conditioning and training program that has been gaining recognition and interest among the physically active population. Approximately 440 certified and registered CrossFit fitness centers and gyms exist in Brazil, with approximately 40,000 athletes. To date, there have been no epidemiological studies about the CrossFit athlete in Brazil. Purpose: To evaluate the profile, sports history, training routine, and presence of injuries among athletes of CrossFit. Study Des...

Interprofessional SDM train-the-trainer program "Fit for SDM": provider satisfaction and impact on participation.

Science.gov (United States)

Körner, Mirjam; Ehrhardt, Heike; Steger, Anne-Kathrin; Bengel, Jürgen

2012-10-01

The aim of the study was to evaluate the interprofessional SDM training program "Fit for SDM" in medical rehabilitation, which was implemented in two steps: (1) university staff trained providers in executive positions as trainers and (2) the providers trained their staff. For the evaluation of the first step a questionnaire for shared decision-making (SDM) skills and satisfaction with the training was completed by the providers in executive positions. A staff survey was used in a cluster-randomized controlled study to determine the overall impact of the train-the-trainer program on internal and external participation in the team. The providers in the six clinics evaluated their SDM competences and satisfaction very positively after training (step 1). External participation was enhanced by application of the training content, with significant changes recorded for females and nurses in particular. However, it had no direct influence on internal participation. This is the first interprofessional SDM train-the-trainer program in Germany to bridge interprofessionalism (internal participation) and SDM (external participation); it was implemented successfully and evaluated positively. Establishing interprofessional SDM training programs should be encouraged for all health care professionals. Implementation in the interprofessional setting should consider interprofessional team factors. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

The Obesity Paradox and Cardiorespiratory Fitness

Directory of Open Access Journals (Sweden)

Paul A. McAuley

2012-01-01

Full Text Available Cardiorespiratory fitness as an explanation for the obesity paradox warrants further examination. We evaluated independent and joint associations of cardiorespiratory fitness and adiposity with all-cause mortality in 811 middle-aged (age, 53.3±7.2 years male never smokers without documented cardiopulmonary disease or diabetes from the Veterans Exercise Testing Study (VETS. Cardiorespiratory fitness was quantified in metabolic equivalents (METs using final treadmill speed and grade achieved on a maximal exercise test. Subjects were grouped for analysis by METs: unfit (lowest third and fit (upper two-thirds; and by body mass index (kg/m2: nonobese (18.5−29.9 and obese (≥30.0. Associations of baseline fitness and adiposity measures with all-cause mortality were determined by Cox proportional hazards analysis adjusted for age, ethnicity, hypertension, hypercholesterolemia, family history of coronary artery disease, and cardiovascular medication use. In multivariate analysis, mortality risk for obese/fit men did not differ significantly from the nonobese/fit reference group. However, compared to the reference group, nonobese and obese unfit men were 2.2 (=0.01 and 1.9 (=0.03 times more likely to die, respectively. Cardiorespiratory fitness altered the obesity paradox such that mortality risk was lower for both obese and nonobese men who were fit.

Evaluation of Cooper 12-minute walk/run test as a marker of cardiorespiratory fitness in young urban children with persistent asthma.

Science.gov (United States)

Weisgerber, Michael; Danduran, Michael; Meurer, John; Hartmann, Kathryn; Berger, Stuart; Flores, Glenn

2009-07-01

To evaluate Cooper 12-minute run/walk test (CT12) as a one-time estimate of cardiorespiratory fitness and marker of fitness change compared with treadmill fitness testing in young children with persistent asthma. A cohort of urban children with asthma participated in the asthma and exercise program and a subset completed pre- and postintervention fitness testing. Treadmill fitness testing was conducted by an exercise physiologist in the fitness laboratory at an academic children's hospital. CT12 was conducted in a college recreation center gymnasium. Forty-five urban children with persistent asthma aged 7 to 14 years participated in exercise interventions. A subset of 19 children completed pre- and postintervention exercise testing. Participants completed a 9-week exercise program where they participated in either swimming or golf 3 days a week for 1 hour. A subset of participants completed fitness testing by 2 methods before and after program completion. CT12 results (meters), maximal oxygen consumption ((.)Vo2max) (mL x kg(-1) x min(-1)), and treadmill exercise time (minutes). CT12 and maximal oxygen consumption were moderately correlated (preintervention: 0.55, P = 0.003; postintervention: 0.48, P = 0.04) as one-time measures of fitness. Correlations of the tests as markers of change over time were poor and nonsignificant. In children with asthma, CT12 is a reasonable one-time estimate of fitness but a poor marker of fitness change over time.

Is High Intensity Functional Training (HIFT)/CrossFit® Safe for Military Fitness Training?

Science.gov (United States)

Poston, Walker S.C.; Haddock, Christopher K.; Heinrich, Katie M.; Jahnke, Sara A.; Jitnarin, Nattinee; Batchelor, David B.

2016-01-01

High-intensity functional training (HIFT) is a promising fitness paradigm that gained popularity among military populations. Rather than biasing workouts toward maximizing fitness domains such as aerobic endurance, HIFT workouts are designed to promote general physical preparedness. HIFT programs have proliferated due to concerns about the relevance of traditional physical training (PT), which historically focused on aerobic condition via running. Other concerns about traditional PT include: 1) the relevance of service fitness tests given current combat demands; 2) the perception that military PT is geared toward passing service fitness tests; and 3) that training for combat requires more than just aerobic endurance. Despite its’ popularity in the military, concerns have been raised about HIFT’s injury potential, leading to some approaches being labeled as “extreme conditioning programs” by several military and civilian experts. Given HIFT programs’ popularity in the military and concerns about injury, a review of data on HIFT injury potential is needed to inform military policy. The purpose of this review is to: 1) provide an overview of scientific methods used to appropriately compare injury rates among fitness activities; and 2) evaluate scientific data regarding HIFT injury risk compared to traditional military PT and other accepted fitness activities PMID:27391615

The International Criticality Safety Benchmark Evaluation Project on the Internet

International Nuclear Information System (INIS)

Briggs, J.B.; Brennan, S.A.; Scott, L.

2000-01-01

The International Criticality Safety Benchmark Evaluation Project (ICSBEP) was initiated in October 1992 by the US Department of Energy's (DOE's) defense programs and is documented in the Transactions of numerous American Nuclear Society and International Criticality Safety Conferences. The work of the ICSBEP is documented as an Organization for Economic Cooperation and Development (OECD) handbook, International Handbook of Evaluated Criticality Safety Benchmark Experiments. The ICSBEP Internet site was established in 1996 and its address is http://icsbep.inel.gov/icsbep. A copy of the ICSBEP home page is shown in Fig. 1. The ICSBEP Internet site contains the five primary links. Internal sublinks to other relevant sites are also provided within the ICSBEP Internet site. A brief description of each of the five primary ICSBEP Internet site links is given

Evaluation of Some Physical Fitness Characteristics in 11-13 Years Old

Science.gov (United States)

Popovici, Ileana Monica; Popescu, Lucian; Radu, Liliana-Elisabeta

2017-01-01

Many studies indicate that a physical fitness characteristic is an important marker for healthy body and healthy mind. The major purpose of this study is to explore the levels of physical fitness of the students between 11 and 13 years of age. The participants of this study are 251 volunteer students including 95 boys and 156 girls between the…

An Overview of the International Reactor Physics Experiment Evaluation Project

International Nuclear Information System (INIS)

Briggs, J. Blair; Gulliford, Jim

2014-01-01

Interest in high-quality integral benchmark data is increasing as efforts to quantify and reduce calculational uncertainties associated with advanced modeling and simulation accelerate to meet the demands of next generation reactor and advanced fuel cycle concepts. Two Organization for Economic Cooperation and Development (OECD) Nuclear Energy Agency (NEA) activities, the International Criticality Safety Benchmark Evaluation Project (ICSBEP), initiated in 1992, and the International Reactor Physics Experiment Evaluation Project (IRPhEP), initiated in 2003, have been identifying existing integral experiment data, evaluating those data, and providing integral benchmark specifications for methods and data validation for nearly two decades. Data provided by those two projects will be of use to the international reactor physics, criticality safety, and nuclear data communities for future decades. An overview of the IRPhEP and a brief update of the ICSBEP are provided in this paper.

Internal dosimetric evaluation due to uranium aerosols

International Nuclear Information System (INIS)

Garcia Aguilar Juan; Delgado Avila Gustavo

1991-01-01

The present work has like object to carry out the internal dosimetric evaluation to the occupationally exposed personnel, due to the inhalation of aerosols of natural uranium and enriched in the pilot plant of nuclear fuel production of the National Institute of Nuclear Research

Outlines of guidelines for the inspection and evaluation of reactor vessel internals

International Nuclear Information System (INIS)

Seki, Hiroaki; Kobayashi, Hiroyuki; Nakano, Morihito; Murai, Soutarou; Nomoto, Toshiharu

2014-01-01

'The guideline committee for the inspection and evaluation of Reactor Vessel Internals' of JANSI (Japan Nuclear Safety Institute) has been developing many guidelines based on principle which the conservative methodology, and covered both individual inspection method of reactor internals and application of repair methods for reactor internals. In this paper, some aspects of the JANSI-VIP-03 (Guidelines for the inspection and evaluation of Reactor Vessel Internals, revised Dec.2013) which is summary document of the committee activity, are introduced. (author)

Exercise addiction in CrossFit: Prevalence and psychometric properties of the Exercise Addiction Inventory.

Science.gov (United States)

Lichtenstein, Mia Beck; Jensen, Tanja Tang

2016-06-01

CrossFit is a mix of aerobic and anaerobic exercise regimes with the stated goal of improving fitness and physical performance. It is growing in popularity and has a strong community known to motivate and push the participants to maximal performance. The negative consequences of these extreme exercise patterns have rarely been described. The prevalence of injuries in CrossFit is high but exercise addiction and harmful exercise attitudes have not yet been assessed. The aim of this study was to measure the prevalence of exercise addiction in CrossFit and to evaluate the reliability and validity of the Exercise Addiction Inventory (EAI) in a CrossFit population. We invited crossfitters to participate in an online survey using Facebook groups. A total of 603 regular crossfitters completed the EAI and additional questions concerning exercise amounts and negative exercise attitudes and beliefs. We used principal component analyses and structural equation models to test the psychometric properties of the EAI and to describe the characteristics of the addicted crossfitters. We found that 5% of the crossfitters were addicted to exercise and that young males had a higher risk. The EAI had good internal reliability (0.73) and construct validity. Thus we found significant positive associations between exercise addiction and the tendency to exercise in spite of injury, feelings of guilt when unable to exercise, passion turning into obsession and taking medication to be able to exercise. Exercise addiction is prevalent in CrossFit and needs further exploration. The EAI is recommended for research in CrossFit communities and applied settings.

Evaluation of Interpolants in Their Ability to Fit Seismometric Time Series

Directory of Open Access Journals (Sweden)

Kanadpriya Basu

2015-08-01

Full Text Available This article is devoted to the study of the ASARCO demolition seismic data. Two different classes of modeling techniques are explored: First, mathematical interpolation methods and second statistical smoothing approaches for curve fitting. We estimate the characteristic parameters of the propagation medium for seismic waves with multiple mathematical and statistical techniques, and provide the relative advantages of each approach to address fitting of such data. We conclude that mathematical interpolation techniques and statistical curve fitting techniques complement each other and can add value to the study of one dimensional time series seismographic data: they can be use to add more data to the system in case the data set is not large enough to perform standard statistical tests.

Evaluation of an international and interprofessional collaboration forum.

Science.gov (United States)

Stone, Teresa; Hua, Susan; Turale, Sue

2016-11-01

International and interprofessional collaborations are increasingly becoming a core requirement for health professionals in our globalized world. The aim of this study was to evaluate the effectiveness of the Asia Pacific Alliance of Health Leaders (APAHL) Forum to enhance the development of international perspectives and leadership among students and faculty in the discipline of health. This pilot study used a student-designed questionnaire to evaluate the views of students and faculty members about the effectiveness of APAHL in meeting its goals. Quantitative data from the scaled items on the questionnaire were analyzed by aggregating the data. Qualitative data were analyzed using a qualitative descriptive approach. Study participants comprised of 22 health science (nursing and laboratory science) students and 15 faculty members. Both faculty and students agreed that APAHL was effective in leadership development of students, as well as in advancing internationalization, interprofessional collaboration, and cultural awareness among students. A clear theme among the students was acknowledgement of the importance of communication, in particular being proficient in English. Difficulties in communication were an issue for both students and faculty members. This pilot study has shown the benefits of a student-focused international forum in developing cross-cultural awareness, and will provide the groundwork for evaluating the effectiveness of cross-cultural and interprofessional leadership forums aimed particularly at students of health. Copyright © 2016 Elsevier Ltd. All rights reserved.

Comparison of marginal and internal adaptation of copings fabricated from three different fabrication techniques: An in vitro study.

Science.gov (United States)

Arora, Aman; Yadav, Avneet; Upadhyaya, Viram; Jain, Prachi; Verma, Mrinalini

2018-01-01

The purpose of this study was to compare the marginal and internal adaptation of cobalt-chromium (Co-Cr) copings fabricated from conventional wax pattern, three-dimensional (3D)-printed resin pattern, and laser sintering technique. A total of thirty copings were made, out of which ten copings were made from 3D-printed resin pattern (Group A), ten from inlay wax pattern (Group B), and ten copings were obtained from direct metal laser sintering (DMLS) technique (Group C). All the thirty samples were seated on their respective dies and sectioned carefully using a laser jet cutter and were evaluated for marginal and internal gaps at the predetermined areas using a stereomicroscope. The values were then analyzed using one-way ANOVA test and post hoc Bonferroni test. One-way ANOVA showed lowest mean marginal discrepancy for DMLS and highest value for copings fabricated from inlay wax. The values for internal discrepancy were highest for DMLS (169.38) and lowest for 3D-printed resin pattern fabricated copings (133.87). Post hoc Bonferroni test for both marginal and internal discrepancies showed nonsignificant difference when Group A was compared to Group B ( P > 0.05) and significant when Group A was compared with Group C ( P < 0.05). Group B showed significant difference ( P < 0.05) when compared with Group C. Marginal and internal discrepancies of all the three casting techniques were within clinically acceptable values. Marginal fit of DMLS was superior as compared to other two techniques, whereas when internal fit was evaluated, conventional technique showed the best internal fit.

Models and Rules of Evaluation in International Accounting

Directory of Open Access Journals (Sweden)

Niculae Feleaga

2006-04-01

Full Text Available The accounting procedures cannot be analyzed without a previous evaluation. Value is in general a very subjective issue, usually the result of a monetary evaluation made to a specific asset, group of assets or entities, or to some rendered services. Within the economic sciences, value comes from its very own deep history. In accounting, the concept of value had a late and fragile start. The term of value must not be misinterpreted as being the same thing with cost, even though value is frequently measured through costs. At the origin of the international accounting standards lays the framework for preparing, presenting and disclosing the financial statements. The framework stays as a reference matrix, as a standard of standards, as a constitution of financial accounting. According to the international framework, the financial statements use different evaluation basis: the hystorical cost, the current cost, the realisable (settlement value, the present value (the present value of cash flows. Choosing the evaluation basis and the capital maintenance concept will eventually determine the accounting evaluation model used in preparing the financial statements of a company. The multitude of accounting evaluation models differentiate themselves one from another through various relevance and reliable degrees of accounting information and therefore, accountants (the prepares of financial statements must try to equilibrate these two main qualitative characteristics of financial information.

Models and Rules of Evaluation in International Accounting

Directory of Open Access Journals (Sweden)

Liliana Feleaga

2006-06-01

Full Text Available The accounting procedures cannot be analyzed without a previous evaluation. Value is in general a very subjective issue, usually the result of a monetary evaluation made to a specific asset, group of assets or entities, or to some rendered services. Within the economic sciences, value comes from its very own deep history. In accounting, the concept of value had a late and fragile start. The term of value must not be misinterpreted as being the same thing with cost, even though value is frequently measured through costs. At the origin of the international accounting standards lays the framework for preparing, presenting and disclosing the financial statements. The framework stays as a reference matrix, as a standard of standards, as a constitution of financial accounting. According to the international framework, the financial statements use different evaluation basis: the hystorical cost, the current cost, the realisable (settlement value, the present value (the present value of cash flows. Choosing the evaluation basis and the capital maintenance concept will eventually determine the accounting evaluation model used in preparing the financial statements of a company. The multitude of accounting evaluation models differentiate themselves one from another through various relevance and reliable degrees of accounting information and therefore, accountants (the prepares of financial statements must try to equilibrate these two main qualitative characteristics of financial information.

International Reactor Physics Experiment Evaluation (IRPhE) Project

International Nuclear Information System (INIS)

2013-01-01

The International Reactor Physics Experiment Evaluation (IRPhE) Project aims to provide the nuclear community with qualified benchmark data sets by collecting reactor physics experimental data from nuclear facilities, worldwide. More specifically the objectives of the expert group are as follows: - maintaining an inventory of the experiments that have been carried out and documented; - archiving the primary documents and data released in computer-readable form; - promoting the use of the format and methods developed and seek to have them adopted as a standard. For those experiments where interest and priority is expressed by member countries or working parties and executive groups within the NEA provide guidance or co-ordination in: - compiling experiments into a standard international agreed format; - verifying the data, to the extent possible, by reviewing original and subsequently revised documentation, and by consulting with the experimenters or individuals who are familiar with the experimenters or the experimental facility; - analysing and interpreting the experiments with current state-of-the-art methods; - publishing electronically the benchmark evaluations. The expert group will: - identify gaps in data and provide guidance on priorities for future experiments; - involve the young generation (Masters and PhD students and young researchers) to find an effective way of transferring know-how in experimental techniques and analysis methods; - provide a tool for improved exploitation of completed experiments for Generation IV reactors; - coordinate closely its work with other NSC experimental work groups in particular the International Criticality Safety Benchmark Evaluation Project (ICSBEP), the Shielding Integral Benchmark Experiment Data Base (SINBAD) and others, e.g. knowledge preservation in fast reactors of the IAEA, the ANS Joint Benchmark Activities; - keep a close link with the working parties on scientific issues of reactor systems (WPRS), the expert

Dietary Patterns and Fitness Level in Mexican Teenagers.

Science.gov (United States)

Estrada-Reyes, César; Tlatempa-Sotelo, Patricia; Valdés-Ramos, Roxana; Cabañas-Armesilla, María; Manjarrez-Montes-de-Oca, Rafael

2018-01-01

Nowadays, the term "physical fitness" has evolved from sports performance to health status, and it has been considered a strong predictor of cardiovascular disease. In this sense, test batteries have been developed to evaluate physical fitness such as the ALPHA-FIT battery. On the other hand, the analysis of dietary patterns has emerged as an alternative method to study the relationship between diet and chronic noncommunicable diseases. However, the association between dietary patterns and the physical fitness level has not been evaluated in both adults and adolescents. This association is most important in adolescents due to the fact that establishing healthy dietary behaviors and a favorable nutritional profile in early stages of life prevents various chronic-degenerative diseases. To analyze the association between dietary patterns and the level of fitness in Mexican teenagers. We analyzed the relationship between dietary patterns and the fitness level of 42 teenage students in Toluca, Mexico. Students were weighed and measured, and their food intake was recorded for 2 weekdays and one weekend day. Dietary patterns were obtained by factorial analysis. The ALPHA-FIT battery was used to measure the fitness level. Fifty percent of the students were found to have a low fitness level (62.1% men; 37.9% women). There was no association ( X 2 = 0.83) between the dietary patterns "high in fat and sugar," "high in protein", and "low in fat and protein" and the level of physical condition in teens. In this study, all of teenagers with a very low level of fitness obtained a high dietary pattern in protein; however, 40% with a high level of physical condition resulted in the same pattern; that is why we did not find a relationship between the fitness level and the patterns investigated in this study.

Using aided cortical assessment as an objective tool to evaluate cochlear implant fitting in users with single-sided deafness.

Directory of Open Access Journals (Sweden)

Dayse Távora-Vieira

Full Text Available To assess the use of cortical auditory evoked potentials (CAEPs to verify, and if necessary, optimize the cochlear implant (CI fitting of adult CI users with postlingual single-sided deafness (SSD.Sound field cortical responses to the speech tokens /m/, /g/, /t/, and /s/ were recorded from input to the CI while the normal hearing ear was masked. Responses were evaluated by visual inspection and classified as presence or absence of the CAEPs components P1, N1, P2. In case of an absence fitting was adjusted accordingly. After fitting, subjects were asked to use their new setting for 2-3 weeks for acclimatization purposes and then return for retesting. At retesting, new CAEP recordings were performed to objectively ensure that the new fitting maps effectively activated the auditory cortex.In 14/19 subjects, as per visual inspection, clear CAEPs were recorded by each speech token and were, therefore, not refit. In the other 5 subjects, CAEPs could not be evoked for at least one speech token. The fitting maps in these subjects were adjusted until clear CAEPs were evoked for all 4 speech tokens.CAEP can be used to quickly and objectively verify the suitability of CI fitting in experienced adult CI users with SSD. If used in the early post-implantation stage, this method could help CI users derive greater benefit for CI use and, therefore, be more committed to auditory training.

Evaluation of Interpolants in Their Ability to Fit Seismometric Time Series

OpenAIRE

Basu, Kanadpriya; Mariani, Maria; Serpa, Laura; Sinha, Ritwik

2015-01-01

This article is devoted to the study of the ASARCO demolition seismic data. Two different classes of modeling techniques are explored: First, mathematical interpolation methods and second statistical smoothing approaches for curve fitting. We estimate the characteristic parameters of the propagation medium for seismic waves with multiple mathematical and statistical techniques, and provide the relative advantages of each approach to address fitting of such data. We conclude that mathematical ...

A Novel Computer-Aided Design/Computer-Assisted Manufacture Method for One-Piece Removable Partial Denture and Evaluation of Fit.

Science.gov (United States)

Ye, Hongqiang; Li, Xinxin; Wang, Guanbo; Kang, Jing; Liu, Yushu; Sun, Yuchun; Zhou, Yongsheng

2018-02-15

To investigate a computer-aided design/computer-aided manufacturing (CAD/CAM) process for producing one-piece removable partial dentures (RPDs) and to evaluate their fits in vitro. A total of 15 one-piece RPDs were designed using dental CAD and reverse engineering software and then fabricated with polyetheretherketone (PEEK) using CAM. The gaps between RPDs and casts were measured and compared with traditional cast framework RPDs. Gaps were lower for one-piece PEEK RPDs compared to traditional RPDs. One-piece RPDs can be manufactured by CAD/CAM, and their fits were better than those of traditional RPDs.

Physical Work Demands and Fitness

DEFF Research Database (Denmark)

Larsen, Mette Korshøj

. The effects were evaluated with objective physiological or diurnal data in an intention-to-treat analysis using multi-adjusted mixed models. The results indicated that the intervention led to several improvements in risk factors for cardiovascular disease, e.g. enhanced cardiorespiratory fitness, reduced...... exposed to high relative aerobic workloads obtained more pronounced increases of resting and 24-hour ambulatory blood pressure, an unaltered cardiorespiratory fitness and a reduced sleeping heart rate. The enhanced resting and 24-hour ambulatory blood pressure may be explained as a potential...

Growth and Expansion of the International Criticality Safety Benchmark Evaluation Project and the Newly Organized International Reactor Physics Experiment Evaluation Project

International Nuclear Information System (INIS)

J. Blair Briggs; Lori Scott; Yolanda Rugama; Enrico Satori

2007-01-01

Since ICNC 2003, the International Criticality Safety Benchmark Evaluation Project (ICSBEP) has continued to expand its efforts and broaden its scope. Criticality-alarm/shielding type benchmarks and fundamental physics measurements that are relevant to criticality safety applications are not only included in the scope of the project, but benchmark data are also included in the latest version of the handbook. A considerable number of improvements have been made to the searchable database, DICE and the criticality-alarm/shielding benchmarks and fundamental physics measurements have been included in the database. There were 12 countries participating on the ICSBEP in 2003. That number has increased to 18 with recent contributions of data and/or resources from Brazil, Czech Republic, Poland, India, Canada, and China. South Africa, Germany, Argentina, and Australia have been invited to participate. Since ICNC 2003, the contents of the ''International Handbook of Evaluated Criticality Safety Benchmark Experiments'' have increased from 350 evaluations (28,000 pages) containing benchmark specifications for 3070 critical or subcritical configurations to 442 evaluations (over 38,000 pages) containing benchmark specifications for 3957 critical or subcritical configurations, 23 criticality-alarm-placement/shielding configurations with multiple dose points for each, and 20 configurations that have been categorized as fundamental physics measurements that are relevant to criticality safety applications in the 2006 Edition of the ICSBEP Handbook. Approximately 30 new evaluations and 250 additional configurations are expected to be added to the 2007 Edition of the Handbook. Since ICNC 2003, a reactor physics counterpart to the ICSBEP, The International Reactor Physics Experiment Evaluation Project (IRPhEP) was initiated. Beginning in 1999, the IRPhEP was conducted as a pilot activity by the by the Organization of Economic Cooperation and Development (OECD) Nuclear Energy Agency

Evaluation of a Substance Use Disorder Curriculum for Internal Medicine Residents

Science.gov (United States)

Stein, Melissa R.; Arnsten, Julia H.; Parish, Sharon J.; Kunins, Hillary V.

2011-01-01

Teaching about diagnosis, treatment, and sequelae of substance use disorders (SUDs) is insufficient in most Internal Medicine residency programs. To address this, the authors developed, implemented, and evaluated a novel and comprehensive SUD curriculum for first year residents (interns) in Internal Medicine, which anchors the ensuing 3-year…

The American Psychiatric Association's resource document on guidelines for psychiatric fitness-for-duty evaluations of physicians.

Science.gov (United States)

Anfang, Stuart A; Faulkner, Larry R; Fromson, John A; Gendel, Michael H

2005-01-01

The psychiatric evaluation of a physician's fitness for duty is an undertaking that is both important to patients' well-being and to the physician-subject of the evaluation. It is necessary that psychiatrists who agree to perform such evaluations proceed in a careful and thorough manner. This document was developed to provide general guidance to the psychiatric evaluators in these situations. It was prepared by the American Psychiatric Association (APA) Council on Psychiatry and Law and Corresponding Committee on Physician Health, Illness, and Impairment, of which the authors are members. The Resource Document was approved by the APA Joint Reference Committee in June 2004. APA Resource Documents do not represent official policy of the American Psychiatric Association. This Resource Document was edited to conform to Journal style and has therefore been modified slightly from the original document approved by the APA.

GROWTH OF THE INTERNATIONAL CRITICALITY SAFETY AND REACTOR PHYSICS EXPERIMENT EVALUATION PROJECTS

Energy Technology Data Exchange (ETDEWEB)

J. Blair Briggs; John D. Bess; Jim Gulliford

2011-09-01

Since the International Conference on Nuclear Criticality Safety (ICNC) 2007, the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and the International Reactor Physics Experiment Evaluation Project (IRPhEP) have continued to expand their efforts and broaden their scope. Eighteen countries participated on the ICSBEP in 2007. Now, there are 20, with recent contributions from Sweden and Argentina. The IRPhEP has also expanded from eight contributing countries in 2007 to 16 in 2011. Since ICNC 2007, the contents of the 'International Handbook of Evaluated Criticality Safety Benchmark Experiments1' have increased from 442 evaluations (38000 pages), containing benchmark specifications for 3955 critical or subcritical configurations to 516 evaluations (nearly 55000 pages), containing benchmark specifications for 4405 critical or subcritical configurations in the 2010 Edition of the ICSBEP Handbook. The contents of the Handbook have also increased from 21 to 24 criticality-alarm-placement/shielding configurations with multiple dose points for each, and from 20 to 200 configurations categorized as fundamental physics measurements relevant to criticality safety applications. Approximately 25 new evaluations and 150 additional configurations are expected to be added to the 2011 edition of the Handbook. Since ICNC 2007, the contents of the 'International Handbook of Evaluated Reactor Physics Benchmark Experiments2' have increased from 16 different experimental series that were performed at 12 different reactor facilities to 53 experimental series that were performed at 30 different reactor facilities in the 2011 edition of the Handbook. Considerable effort has also been made to improve the functionality of the searchable database, DICE (Database for the International Criticality Benchmark Evaluation Project) and verify the accuracy of the data contained therein. DICE will be discussed in separate papers at ICNC 2011. The status of the

A Survey of Clinical Skills Evaluation Practices in Internal Medicine Residency Programs.

Science.gov (United States)

Blank, Linda L.; And Others

1984-01-01

The evaluation processes of 75 internal medicine residencies visited by the American Board of Internal Medicine (ABIM) in 1978-82 are reviewed. The methods of evaluation used by the residencies are described and compared with the findings from an earlier cycle of visits in 1972-75. (Author/MLW)

Fitting a three-parameter lognormal distribution with applications to hydrogeochemical data from the National Uranium Resource Evaluation Program

International Nuclear Information System (INIS)

Kane, V.E.

1979-10-01

The standard maximum likelihood and moment estimation procedures are shown to have some undesirable characteristics for estimating the parameters in a three-parameter lognormal distribution. A class of goodness-of-fit estimators is found which provides a useful alternative to the standard methods. The class of goodness-of-fit tests considered include the Shapiro-Wilk and Shapiro-Francia tests which reduce to a weighted linear combination of the order statistics that can be maximized in estimation problems. The weighted-order statistic estimators are compared to the standard procedures in Monte Carlo simulations. Bias and robustness of the procedures are examined and example data sets analyzed including geochemical data from the National Uranium Resource Evaluation Program

Clinical Fit of Partial Removable Dental Prostheses Based on Alginate or Polyvinyl Siloxane Impressions.

Science.gov (United States)

Fokkinga, Wietske A; Witter, Dick J; Bronkhorst, Ewald M; Creugers, Nico H

The aim of this study was to analyze the clinical fit of metal-frame partial removable dental prostheses (PRDPs) based on custom trays used with alginate or polyvinyl siloxane impression material. Fifth-year students of the Nijmegen Dental School made 25 correct impressions for 23 PRDPs for 21 patients using alginate, and 31 correct impressions for 30 PRDPs for 28 patients using polyvinyl siloxane. Clinical fit of the framework as a whole and of each retainer separately were evaluated by calibrated supervisors during framework try-in before (first evaluation) and after (second evaluation) possible adjustments (score 0 = poor fit, up to score 3 = good fit). Framework fit and fit of the denture base were evaluated at delivery (third evaluation). Finally, postinsertion sessions were evaluated and total number of sessions needed, sore spots, adjustments to the denture base, and reported food-impaction were recorded. No significant differences in clinical fit (of the framework as a whole, for the retainers, or for the denture base) were found between the groups in the three evaluation sessions. Differences were not found for postinsertion sessions with one exception: in the alginate group, four subjects reported food impaction, versus none in the polyvinyl siloxane group. Clinical fit of metal-frame PRDPs based on impressions with custom trays combined with alginate or polyvinyl siloxane was similar.

[Sedentarism and physical fitness in postmenopausal women].

Science.gov (United States)

Morales, Silvia; Gómez-Cabello, Alba; González-Agüero, Alejandro; Casajús, José Antonio; Ara, Ignacio; Vicente-Rodríguez, Germán

2013-01-01

The aging process is accompanied by several changes, such as a decrease in physical fitness. To establish the relationship between a sedentary behavior (sit ≥4 hours/day) and physical fitness in 457 women aged 65 years or older. Physical fitness was evaluated by 8 adapted tests from "Senior Fitness Test" and "Eurofit Testing Battery". ANOVA was used to analyze differences between groups according to the hours of sitting and logistic regression analysis was used to study the association of the sedentary behavior with low fitness, using as reference the 20th percentile of the normative values in Spain (EXERNET Project). Sedentary women had lower balance, legs and arms strength, arms flexibility, walking speed and endurance (p < 0.05). In addition, those women who sat ≥4 hours/day had higher odds for having low fitness in most of the mentioned tests, regardless of the hours of walking (p < 0.05). Sitting for a long time has a negative influence on physical fitness among postmenopausal women independently of walking time. Copyright © AULA MEDICA EDICIONES 2013. Published by AULA MEDICA. All rights reserved.

Establishing the NeuroRecovery Network Community Fitness and Wellness facilities: multi-site fitness facilities provide activity-based interventions and assessments for evidence-based functional gains in neurologic disorders.

Science.gov (United States)

Tolle, Heather; Rapacz, Andrew; Weintraub, Barry; Shogren, Carrie; Harkema, Susan J; Gibson, Jeremy L

2017-08-17

Physical fitness is a necessity for those living with a spinal cord injury, yet access to fitness facilities, equipment, and specially trained fitness experts are limited. This article introduces the concept of a network of fitness facilities specially geared towards individuals with spinal cord injury and other neurological disorders. The Community Fitness and Wellness branch of the NeuroRecovery Network was created to provide a continuum of care after traditional rehabilitation for individuals living with a spinal cord injury and other neurological disorders. Community Fitness and Wellness facilities translate activity-based interventions performed during rehabilitation into a community setting as well as provide other fitness and wellness opportunities. Community Fitness and Wellness facilities are staffed by professionals with training on the specialized needs of individuals living with spinal cord injury or other neurological disorders. Standardized assessments evaluate functional, health, and quality of life gains at regular intervals. A national database gathers information on standardized interventions and assessment outcomes providing a mechanism for evaluation of interventions performed in the community setting. The establishment of Community Fitness and Wellness facilities allows for the quick translation and evaluation of novel, effective approaches from research to individuals in the community. Implications for Rehabilitation Fitness needs of individuals with spinal cord injury living in the community necessitate the use of special equipment and trained staff. Community Fitness and Wellness Programs offer specially trained staff and adaptive equipment providing a continuity of care for those with spinal cord injuries and other neurological disorders.

Prospective evaluation of the need for internal monitoring

International Nuclear Information System (INIS)

Barton, T.P.; Bowers, R.R.; Volza, P.

1992-01-01

This paper reports that under the revision of 10 CFR 20, workers must be monitored for internal dose only if a prospective evaluation shows that they are likely to exceed 10 percent of an ALI in a year. Past positive whole body counts were reviewed at the Perry Nuclear Power Plant, and the largest uptake was found to be 1.3 percent of an ALI. Past RWPs which had the potential for significant airborne exposure were identified and reviewed. The highest possible uptake was calculated to be 2.5 percent of an ALI, not taking credit for respiratory protection. Committed dose from alpha and pure beta emitters which would not be identified by gamma-sensitive bioassay was found to be negligible. Based on this prospective evaluation, monitoring personnel for internal dose is not required at this facility

Functional Fitness Training: Is it Right for You?

Science.gov (United States)

... older adults: A randomized-controlled cross-over design. International Journal of Behavioral Nutrition and Physical Activity. 2012;9:107. Zhao Y, et al. Differences in functional fitness among older adults with and without risk of falling. Asian Nursing Research. 2016;10:51. Oct. 29, 2016 Original ...

Hospitalist workload influences faculty evaluations by internal medicine clerkship students

Directory of Open Access Journals (Sweden)

Robinson RL

2015-02-01

Full Text Available Robert L Robinson Department of Internal Medicine, Southern Illinois University School of Medicine, Springfield, Illinois, USA Background: The last decade has brought significant changes to internal medicine clerkships through resident work-hour restrictions and the widespread adoption of hospitalists as medical educators. These key medical educators face competing demands for quality teaching and clinical service intensity. Objective: The study reported here was conducted to explore the relationship between clinical service intensity and teaching evaluations of hospitalists by internal medicine clerkship students. Design: A retrospective correlation analysis of clinical service intensity and teaching evaluations of hospitalists by internal medicine clerkship students during the 2009 to 2013 academic years at Southern Illinois University School of Medicine was conducted. Participants: Internal medicine hospitalists who supervise the third-year inpatient experience for medical students during the 2009 to 2013 academic years participated in the study. Measures: Clinical service intensity data in terms of work relative value units (RVUs, patient encounters, and days of inpatient duty were collected for all members of the hospitalist service. Medical students rated hospitalists in the areas of patient rapport, enthusiasm about the profession, clinical skills, sharing knowledge and skills, encouraging the students, probing student knowledge, stimulating independent learning, providing timely feedback, providing constructive criticism, and observing patient encounters with students. Results: Significant negative correlations between higher work RVU production, total patient encounters, duty days, and learner evaluation scores for enthusiasm about the profession, clinical skills, probing the student for knowledge and judgment, and observing a patient encounter with the student were identified. Higher duty days had a significant negative correlation

Hospitalist workload influences faculty evaluations by internal medicine clerkship students.

Science.gov (United States)

Robinson, Robert L

2015-01-01

The last decade has brought significant changes to internal medicine clerkships through resident work-hour restrictions and the widespread adoption of hospitalists as medical educators. These key medical educators face competing demands for quality teaching and clinical service intensity. The study reported here was conducted to explore the relationship between clinical service intensity and teaching evaluations of hospitalists by internal medicine clerkship students. A retrospective correlation analysis of clinical service intensity and teaching evaluations of hospitalists by internal medicine clerkship students during the 2009 to 2013 academic years at Southern Illinois University School of Medicine was conducted. Internal medicine hospitalists who supervise the third-year inpatient experience for medical students during the 2009 to 2013 academic years participated in the study. Clinical service intensity data in terms of work relative value units (RVUs), patient encounters, and days of inpatient duty were collected for all members of the hospitalist service. Medical students rated hospitalists in the areas of patient rapport, enthusiasm about the profession, clinical skills, sharing knowledge and skills, encouraging the students, probing student knowledge, stimulating independent learning, providing timely feedback, providing constructive criticism, and observing patient encounters with students. Significant negative correlations between higher work RVU production, total patient encounters, duty days, and learner evaluation scores for enthusiasm about the profession, clinical skills, probing the student for knowledge and judgment, and observing a patient encounter with the student were identified. Higher duty days had a significant negative correlation with sharing knowledge/skills and encouraging student initiative. Higher work RVUs and total patient encounters were negatively correlated with timely feedback and constructive criticism. The results suggest that

Exploration and Exploitation Fit and Performance in International Strategic Alliances

DEFF Research Database (Denmark)

Nielsen, Bo Bernhard; Gudergan, Siegfried

2012-01-01

antithetical) strategies with different antecedents and performance consequences. Our results show that while competency similarity is conducive to upstream innovative performance, prior experience with the partner is potentially damaging for this type of performance and trust and cultural distance do not play...... significant roles. When the motive is efficiency and downstream market performance, prior experience with the partner instead is beneficial, as are high levels of trust and low levels of cultural distance. These findings have key implications for literature on strategic fit and alliance performance....

Smartphone apps to improve fitness and increase physical activity among young people: protocol of the Apps for IMproving FITness (AIMFIT) randomized controlled trial.

Science.gov (United States)

Direito, Artur; Jiang, Yannan; Whittaker, Robyn; Maddison, Ralph

2015-07-11

Physical activity is a modifiable behavior related to many preventable non-communicable diseases. There is an age-related decline in physical activity levels in young people, which tracks into adulthood. Common interactive technologies such as smartphones, particularly employing immersive features, may enhance the appeal and delivery of interventions to increase levels of physical activity in young people. The primary aim of the Apps for IMproving FITness (AIMFIT) trial is to evaluate the effectiveness of two popular "off-the-shelf" smartphone apps for improving cardiorespiratory fitness in young people. A three-arm, parallel, randomized controlled trial will be conducted in Auckland, New Zealand. Fifty-one eligible young people aged 14-17 years will be randomized to one of three conditions: 1) use of an immersive smartphone app, 2) use of a non-immersive app, or 3) usual behavior (control). Both smartphone apps consist of an eight-week training program designed to improve fitness and ability to run 5 km, however, the immersive app features a game-themed design and adds a narrative. Data are collected at baseline and 8 weeks. The primary outcome is cardiorespiratory fitness, assessed as time to complete the one mile run/walk test at 8 weeks. Secondary outcomes are physical activity levels, self-efficacy, enjoyment, psychological need satisfaction, and acceptability and usability of the apps. Analysis using intention to treat principles will be performed using regression models. Despite the proliferation of commercially available smartphone applications, there is a dearth of empirical evidence to support their effectiveness on the targeted health behavior. This pragmatic study will determine the effectiveness of two popular "off-the-shelf" apps as a stand-alone instrument for improving fitness and physical activity among young people. Adherence to app use will not be closely controlled; however, random allocation of participants, a heterogeneous group, and data

Growth and Expansion of the International Criticality Safety Benchmark Evaluation Project and the Newly Organized International Reactor Physics Experiment Evaluation Project

Energy Technology Data Exchange (ETDEWEB)

J. Blair Briggs; Lori Scott; Yolanda Rugama; Enrico Satori

2007-05-01

Since ICNC 2003, the International Criticality Safety Benchmark Evaluation Project (ICSBEP) has continued to expand its efforts and broaden its scope. Criticality-alarm / shielding type benchmarks and fundamental physics measurements that are relevant to criticality safety applications are not only included in the scope of the project, but benchmark data are also included in the latest version of the handbook. A considerable number of improvements have been made to the searchable database, DICE and the criticality-alarm / shielding benchmarks and fundamental physics measurements have been included in the database. There were 12 countries participating on the ICSBEP in 2003. That number has increased to 18 with recent contributions of data and/or resources from Brazil, Czech Republic, Poland, India, Canada, and China. South Africa, Germany, Argentina, and Australia have been invited to participate. Since ICNC 2003, the contents of the “International Handbook of Evaluated Criticality Safety Benchmark Experiments” have increased from 350 evaluations (28,000 pages) containing benchmark specifications for 3070 critical or subcritical configurations to 442 evaluations (over 38,000 pages) containing benchmark specifications for 3957 critical or subcritical configurations, 23 criticality-alarm-placement / shielding configurations with multiple dose points for each, and 20 configurations that have been categorized as fundamental physics measurements that are relevant to criticality safety applications in the 2006 Edition of the ICSBEP Handbook. Approximately 30 new evaluations and 250 additional configurations are expected to be added to the 2007 Edition of the Handbook. Since ICNC 2003, a reactor physics counterpart to the ICSBEP, The International Reactor Physics Experiment Evaluation Project (IRPhEP) was initiated. Beginning in 1999, the IRPhEP was conducted as a pilot activity by the by the Organization of Economic Cooperation and Development (OECD) Nuclear Energy

Investigation into the Factors that Dtermine Shoe Fitting Using MRI

OpenAIRE

吉田, 宏昭

2014-01-01

It is essential to purchase suitable shoes that fit the size of users' feet in order to prevent foot injuries in daily life. Although shoe fitting significantly affects the performance of shoes, there are few studies that have either investigated the factors that control shoe fitting or established a method to evaluate shoe fitting. While, the shape of each foot and shoe was measured to estimate shoe fitting in previous studies, the deformation of feet when wearing shoes had not been taken in...

Fitness for duty - a regulator's view

International Nuclear Information System (INIS)

Johnson, E.H.; Hall, R.E.

1987-01-01

Fitness for duty is a legal, moral, emotional, and political issue. It is therefore that type of issue that one would expect industry to run from, opting instead for government intervention and prescriptive regulations. This would allow the industry to hide behind the shield of doing what is necessary to comply. But fitness for duty is also a rational business issue. It involves getting a reasonable return on the investment in the people who are necessary to run the nuclear industry. It is within this context that the US Nuclear Regulatory Commission (NRC) has exercised its discretion to not undertake new rule making, instead giving the industry the mandate of pursuing this issue. The NRC has deferred rule making as long as the industry programs are effective in producing the desired results. The NRC has also retained the right to follow up on operational events and to evaluate the effectiveness of the programs in place. The industry, under the leadership of NUMARC, has risen to this challenge and has adopted the August 1985 Edison Electric Institute (EEI) fitness-for-duty program guidelines for implementation by all utilities. In evaluating the effectiveness of programs, the NRC is conducting inspections at some utilities. These inspections have confirmed that the EEI guidelines are being used as the basis for fitness-for-duty programs. Even though the nuclear industry has taken a generally strong stand on fitness for duty and has adopted reasonable guidelines for its assurance, there still remain several challenges

Evaluation of interference fit and bone damage of an uncemented femoral knee implant.

Science.gov (United States)

Berahmani, Sanaz; Hendriks, Maartje; de Jong, Joost J A; van den Bergh, Joop P W; Maal, Thomas; Janssen, Dennis; Verdonschot, Nico

2018-01-01

During implantation of an uncemented femoral knee implant, press-fit interference fit provides the primary stability. It is assumed that during implantation a combination of elastic and plastic deformation and abrasion of the bone will occur, but little is known about what happens at the bone-implant interface and how much press-fit interference fit is eventually achieved. Five cadaveric femora were prepared and implantation was performed by an experienced surgeon. Micro-CT- and conventional CT-scans were obtained pre- and post-implantation for geometrical measurements and to measure bone mineral density. Additionally, the position of the implant with respect to the bone was determined by optical scanning of the reconstructions. By measuring the differences in surface geometry, assessments were made of the cutting error, the actual interference fit, the amount of bone damage, and the effective interference fit. Our analysis showed an average cutting error of 0.67mm (SD 0.17mm), which pointed mostly towards bone under-resections. We found an average actual AP interference fit of 1.48mm (SD 0.27mm), which was close to the nominal value of 1.5mm. We observed combinations of bone damage and elastic deformation in all bone specimens, which showed a trend to be related with bone density. Higher bone density tended to lead to lower bone damage and higher elastic deformation. The results of the current study indicate different factors that interact while implanting an uncemented femoral knee component. This knowledge can be used to fine-tune design criteria of femoral components to achieve adequate primary stability for all patients. Copyright © 2017 Elsevier Ltd. All rights reserved.

International handbook of evaluated criticality safety benchmark experiments

International Nuclear Information System (INIS)

2010-01-01

The Criticality Safety Benchmark Evaluation Project (CSBEP) was initiated in October of 1992 by the United States Department of Energy. The project quickly became an international effort as scientists from other interested countries became involved. The International Criticality Safety Benchmark Evaluation Project (ICSBEP) became an official activity of the Organization for Economic Cooperation and Development - Nuclear Energy Agency (OECD-NEA) in 1995. This handbook contains criticality safety benchmark specifications that have been derived from experiments performed at various nuclear critical facilities around the world. The benchmark specifications are intended for use by criticality safety engineers to validate calculational techniques used to establish minimum subcritical margins for operations with fissile material and to determine criticality alarm requirement and placement. Many of the specifications are also useful for nuclear data testing. Example calculations are presented; however, these calculations do not constitute a validation of the codes or cross section data. The evaluated criticality safety benchmark data are given in nine volumes. These volumes span over 55,000 pages and contain 516 evaluations with benchmark specifications for 4,405 critical, near critical, or subcritical configurations, 24 criticality alarm placement / shielding configurations with multiple dose points for each, and 200 configurations that have been categorized as fundamental physics measurements that are relevant to criticality safety applications. Experiments that are found unacceptable for use as criticality safety benchmark experiments are discussed in these evaluations; however, benchmark specifications are not derived for such experiments (in some cases models are provided in an appendix). Approximately 770 experimental configurations are categorized as unacceptable for use as criticality safety benchmark experiments. Additional evaluations are in progress and will be

A reexamination and extension of international strategy-structure theory

OpenAIRE

Wolf, Joachim; Egelhoff, William G.

2001-01-01

Using a sample of 95 German firms, the study finds general support for the traditional fits of international strategy-structure theory. Employing an information-processing perspective, the study conceptually and empirically extends existing theory (1) to address strategy-structure fit for various types of matrix structure, and (2) by adding two new elements of international strategy to the existing international strategy-structure model: the level of international transfers and level of forei...

A Women-Only Comparison of the U.S. Air Force Fitness Test and the Marine Combat Fitness Test

Science.gov (United States)

2012-03-01

Air Force established the Fitness Assessment Cell to conduct fitness assessments for all Air Force members and to encourage standardization in...objective. “The MCFT was specifically designed to evaluate strength, stamina , agility and coordination as well as overall anaerobic capacity” (Department...1308.1, “Service members must possess stamina and strength to perform, successfully, any mission,” and that “…each service develops a quality 78

Energetic fitness: Field metabolic rates assessed via 3D accelerometry complement conventional fitness metrics

Science.gov (United States)

Grémillet, David; Lescroël, Amelie; Ballard, Grant; Dugger, Katie M.; Massaro, Melanie; Porzig, Elizabeth L.; Ainley, David G.

2018-01-01

Evaluating the fitness of organisms is an essential step towards understanding their responses to environmental change. Connections between energy expenditure and fitness have been postulated for nearly a century. However, testing this premise among wild animals is constrained by difficulties in measuring energy expenditure while simultaneously monitoring conventional fitness metrics such as survival and reproductive output.We addressed this issue by exploring the functional links between field metabolic rate (FMR), body condition, sex, age and reproductive performance in a wild population.We deployed 3D accelerometers on 115 Adélie penguins Pygoscelis adeliae during four breeding seasons at one of the largest colonies of this species, Cape Crozier, on Ross Island, Antarctica. The demography of this population has been studied for the past 18 years. From accelerometry recordings, collected for birds of known age and breeding history, we determined the vector of the dynamic body acceleration (VeDBA) and used it as a proxy for FMR.This allowed us to demonstrate relationships among FMR, a breeding quality index (BQI) and body condition. Notably, we found a significant quadratic relationship between mean VeDBA during foraging and BQI for experienced breeders, and individuals in better body condition showed lower rates of energy expenditure.We conclude that using FMR as a fitness component complementary to more conventional fitness metrics will yield greater understanding of evolutionary and conservation physiology.

Evaluation guide for the international reactor physics experiments evaluation project (IRPhEP)

International Nuclear Information System (INIS)

Yamaji, Akifumi

2013-01-01

At present, there is an urgent need to preserve integral reactor physics experimental data including separate or special effects data for nuclear energy and technology applications and the knowledge and competence contained therein. The International Reactor Physics Evaluation Project (IRPhEP) was initiated as a pilot activity in 1999 by the Organization of Economic Cooperation and Development (OECD) Nuclear Energy Agency (NEA) Nuclear Science Committee (NSC). The project was endorsed as an official activity of the NSC in June of 2003. While coordination and administration of the IRPhEP takes place at an international level, each participating country is responsible for the administration, technical direction, and priorities of the project within their respective countries. This document outlines the general presentation guidelines that evaluators should follow for the description of the experiments and all relevant experimental data in order to ensure the consistency between the evaluations published in the final Handbook. Publication templates will be used to ensure this consistency and will follow the general scheme below: 1 - Experiment identification number; 2- Date; 3 - Name of experiment (Purpose of experiment, Phenomena measured and scope); 4 - Name or designation of experimental programme; 5 - Description of facility; 6 - Description of test or experiment (Experimental configuration, Core life cycle, Experimental limitations or shortcomings); 7 - Phenomena measured (Description of results and analysis, Special features and characteristics of experiment, Measurement systems/methods and uncertainties); 8 - Duplicate or complementary experiments / other related experiments; 9 - Status of completion of the evaluation; 10 - References (pointer to evaluation, archive if available, otherwise generic bibliographic reference); 11 - Authors/ organisers 12 - Material available

Mindfulness, burnout, and effects on performance evaluations in internal medicine residents

Directory of Open Access Journals (Sweden)

Braun SE

2017-08-01

Full Text Available Sarah E Braun,1 Stephen M Auerbach,1 Bruce Rybarczyk,1 Bennett Lee,2 Stephanie Call2 1Department of Psychology, School of Humanities and Sciences, Virginia Commonwealth University, Richmond, VA, USA; 2Department of Internal Medicine, Division of General Medicine, Virginia Commonwealth University, Richmond, VA, USA Purpose: Burnout has been documented at high levels in medical residents with negative effects on performance. Some dispositional qualities, like mindfulness, may protect against burnout. The purpose of the present study was to assess burnout prevalence among internal medicine residents at a single institution, examine the relationship between mindfulness and burnout, and provide preliminary findings on the relation between burnout and performance evaluations in internal medicine residents.Methods: Residents (n = 38 completed validated measures of burnout at three time points separated by 2 months and a validated measure of dispositional mindfulness at baseline. Program director end-of-year performance evaluations were also obtained on 22 milestones used to evaluate internal medicine resident performance; notably, these milestones have not yet been validated for research purposes; therefore, the investigation here is exploratory.Results: Overall, 71.1% (n = 27 of the residents met criteria for burnout during the study. Lower scores on the “acting with awareness” facet of dispositional mindfulness significantly predicted meeting burnout criteria χ2(5 = 11.88, p = 0.04. Lastly, meeting burnout criteria significantly predicted performance on three of the performance milestones, with positive effects on milestones from the “system-based practices” and “professionalism” domains and negative effects on a milestone from the “patient care” domain.Conclusion: Burnout rates were high in this sample of internal medicine residents and rates were consistent with other reports of burnout during medical residency. Dispositional

The biomechanical characteristics of wearing FitFlop™ sandals highlight significant alterations in gait pattern: a comparative study.

Science.gov (United States)

James, Darren C; Farmer, Laura J; Sayers, Jason B; Cook, David P; Mileva, Katya N

2015-05-01

The net contribution of all muscles that act about a joint can be represented as an internal joint moment profile. This approach may be advantageous when studying footwear-induced perturbations during walking since the contribution of the smaller deeper muscles that cross the ankle joint cannot be evaluated with surface electromyography. Therefore, the present study aimed to advance the understanding of FitFlop™ footwear interaction by investigating lower extremity joint moment, and kinematic and centre of pressure profiles during gait. 28 healthy participants performed 5 walking trials in 3 conditions: a FitFlop™ sandal, a conventional sandal and an athletic trainer. Three-dimensional ankle joint, and sagittal plane knee and hip joint moments, as well as corresponding kinematics and centre of pressure trajectories were evaluated. FitFlop™ differed significantly to both the conventional sandal and athletic trainer in: average anterior position of centre of pressure trajectory (Pgait pattern of wearers. An anterior displacement of the centre of pressure trajectory during early stance is the primary response to the destabilising effect of the mid-sole technology, and this leads to reductions in sagittal plane ankle joint range of motion and corresponding kinetics. Future investigations should consider the clinical implications of these findings. Copyright © 2015 Elsevier Ltd. All rights reserved.

Fitting PAC spectra with stochastic models: PolyPacFit

Energy Technology Data Exchange (ETDEWEB)

Zacate, M. O., E-mail: zacatem1@nku.edu [Northern Kentucky University, Department of Physics and Geology (United States); Evenson, W. E. [Utah Valley University, College of Science and Health (United States); Newhouse, R.; Collins, G. S. [Washington State University, Department of Physics and Astronomy (United States)

2010-04-15

PolyPacFit is an advanced fitting program for time-differential perturbed angular correlation (PAC) spectroscopy. It incorporates stochastic models and provides robust options for customization of fits. Notable features of the program include platform independence and support for (1) fits to stochastic models of hyperfine interactions, (2) user-defined constraints among model parameters, (3) fits to multiple spectra simultaneously, and (4) any spin nuclear probe.

Definition of the Flexible Image Transport System (FITS), version 3.0

Science.gov (United States)

Pence, W. D.; Chiappetti, L.; Page, C. G.; Shaw, R. A.; Stobie, E.

2010-12-01

The Flexible Image Transport System (FITS) has been used by astronomers for over 30 years as a data interchange and archiving format; FITS files are now handled by a wide range of astronomical software packages. Since the FITS format definition document (the “standard”) was last printed in this journal in 2001, several new features have been developed and standardized, notably support for 64-bit integers in images and tables, variable-length arrays in tables, and new world coordinate system conventions which provide a mapping from an element in a data array to a physical coordinate on the sky or within a spectrum. The FITS Working Group of the International Astronomical Union has therefore produced this new version 3.0 of the FITS standard, which is provided here in its entirety. In addition to describing the new features in FITS, numerous editorial changes were made to the previous version to clarify and reorganize many of the sections. Also included are some appendices which are not formally part of the standard. The FITS standard is likely to undergo further evolution, in which case the latest version may be found on the FITS Support Office Web site at http://fits.gsfc.nasa.gov/, which also provides many links to FITS-related resources.

Definition of the Flexible Image Transport System (FITS), Version 3.0

Science.gov (United States)

Pence, W. D.; Chiapetti, L.; Page, C. G.; Shaw, R. A.; Stobie, E.

2010-01-01

The Flexible Image Transport System (FITS) has been used by astronomers for over 30 years as a data interchange and archiving format; FITS files are now handled by a wide range of astronomical software packages. Since the FITS format definition document (the "standard") was last printed in this journal in 2001, several new features have been developed and standardized, notably support for 64-bit integers in images and tables, variable-length arrays in tables, and new world coordinate system conventions which provide a mapping from an element in a data array to a physical coordinate on the sky or within a spectrum. The FITS Working Group of the International Astronomical Union has therefore produced this new Version 3.0 of the FITS standard, which is provided here in its entirety. In addition to describing the new features in FITS, numerous editorial changes were made to the previous version to clarify and reorganize many of the sections. Also included are some appendices which are not formally part of the standard. The FITS standard is likely to undergo further evolution, in which case the latest version may be found on the FITS Support Office Web site at http://fits.gsfc.nasa.gov/, which also provides many links to FITS-related resources.

Evaluation of a Health and Fitness Social Media Experience

Science.gov (United States)

Frimming, Renee E.; Polsgrove, Myles Jay; Bower, Glenna G.

2011-01-01

Background: University health and fitness faculty members are continually striving to enhance the health knowledge of their students. Purpose: The purpose of this case study was to survey student reflections of a social media experience. Methods: Students were placed into one of two groups: Learners (N = 92) or Pre-Service Health and Fitness…

Person-job fit: an exploratory cross-sectional analysis of hospitalists.

Science.gov (United States)

Hinami, Keiki; Whelan, Chad T; Miller, Joseph A; Wolosin, Robert J; Wetterneck, Tosha B

2013-02-01

Person-job fit is an organizational construct shown to impact the entry, performance, and retention of workers. Even as a growing number of physicians work under employed situations, little is known about how physicians select, develop, and perform in organizational settings. Our objective was to validate in the hospitalist physician workforce features of person-job fit observed in workers of other industries. The design was a secondary survey data analysis from a national stratified sample of practicing US hospitalists. The measures were person-job fit; likelihood of leaving practice or reducing workload; organizational climate; relationships with colleagues, staff, and patients; participation in suboptimal patient care activities. Responses to the Hospital Medicine Physician Worklife Survey by 816 (sample response rate 26%) practicing hospitalists were analyzed. Job attrition and reselection improved job fit among hospitalists entering the job market. Better job fit was achieved through hospitalists engaging a variety of personal skills and abilities in their jobs. Job fit increased with time together with socialization and internalization of organizational values. Hospitalists with higher job fit felt they performed better in their jobs. Features of person-job fit for hospitalists conformed to what have been observed in nonphysician workforces. Person-job fit may be a useful complementary survey measure related to job satisfaction but with a greater focus on function. Copyright © 2012 Society of Hospital Medicine.

Evaluation of internal flooding in a BWR

International Nuclear Information System (INIS)

Shiu, K.; Papazoglou, I.A.; Sun, Y.H.; Anavim, E.; Ilberg, D.

1985-01-01

Flooding inside a nuclear power station is capable of concurrently disabling redundant safety systems. This paper presents the results of a recent review study performed on internally-generated floods inside a boiling water reactor (BWR) reactor building. The study evaluated the flood initiator frequency due to either maintenance or ruptures using Markovian models. A time phased event tree approach was adopted to quantify the core damage frequency based on the flood initiator frequency. It is found in the study that the contribution to the total core damage due to internal flooding events is not insignificant and is comparable to other transient contributors. The findings also indicate that the operator plays an important role in the prevention as well as the mitigation of a flooding event

Online Influence and Sentiment of Fitness Tweets: Analysis of Two Million Fitness Tweets.

Science.gov (United States)

Vickey, Theodore; Breslin, John G

2017-10-31

by a ratio of 4 to 1. The results of this research suggest that the users of mobile fitness apps who share their workouts via Twitter have a lower Klout Score than the general Twitter user and that users who chose to share additional insights into their workouts are more positive in sentiment than negative. We present a novel perspective into the physical activity messaging from within mobile fitness apps that are then shared over Twitter. By moving beyond the numbers and evaluating both the Twitter user and the emotions tied to physical activity, future research could analyze additional relationships between the user's online influence, the enjoyment of the physical activity, and with additional analysis a long-term retention strategy for the use of a fitness app. ©Theodore Vickey, John G. Breslin. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 31.10.2017.

Critical evaluation of international health programs: Reframing global health and evaluation.

Science.gov (United States)

Chi, Chunhuei; Tuepker, Anaïs; Schoon, Rebecca; Núñez Mondaca, Alicia

2018-01-05

Striking changes in the funding and implementation of international health programs in recent decades have stimulated debate about the role of communities in deciding which health programs to implement. An important yet neglected piece of that discussion is the need to change norms in program evaluation so that analysis of community ownership, beyond various degrees of "participation," is seen as central to strong evaluation practices. This article challenges mainstream evaluation practices and proposes a framework of Critical Evaluation with 3 levels: upstream evaluation assessing the "who" and "how" of programming decisions; midstream evaluation focusing on the "who" and "how" of selecting program objectives; and downstream evaluation, the focus of current mainstream evaluation, which assesses whether the program achieved its stated objectives. A vital tenet of our framework is that a community possesses the right to determine the path of its health development. A prerequisite of success, regardless of technical outcomes, is that programs must address communities' high priority concerns. Current participatory methods still seldom practice community ownership of program selection because they are vulnerable to funding agencies' predetermined priorities. In addition to critiquing evaluation practices and proposing an alternative framework, we acknowledge likely challenges and propose directions for future research. Copyright © 2018 John Wiley & Sons, Ltd.

Evaluating Sustainability Education: Lessons from International Development Experience

Science.gov (United States)

Koehn, Peter H.; Uitto, Juha I.

2014-01-01

Since the mid 1970s, a series of international declarations that recognize the critical link between environmental sustainability and higher education have been endorsed and signed by universities around the world. While academic initiatives in sustainability are blossoming, higher education lacks a comprehensive evaluation framework that is…

On the accurate fast evaluation of finite Fourier integrals using cubic splines

International Nuclear Information System (INIS)

Morishima, N.

1993-01-01

Finite Fourier integrals based on a cubic-splines fit to equidistant data are shown to be evaluated fast and accurately. Good performance, especially on computational speed, is achieved by the optimization of the spline fit and the internal use of the fast Fourier transform (FFT) algorithm for complex data. The present procedure provides high accuracy with much shorter CPU time than a trapezoidal FFT. (author)

Evaluation of some physical fitness characteristics in 11-13 years old

Directory of Open Access Journals (Sweden)

Ileana Monica Popovici

2017-01-01

Full Text Available Abstract Many studies indicate that a physical fitness characteristic is an important marker for healthy body and healthy mind. The major purpose of this study is to explore the levels of physical fitness of the students between 11 and 13 years of age. The participants of this study are 251 volunteer students including 95 boys and 156 girls between the ages 11 and 13 who participated at physical education lessons two times a week. The students were assessed for six anthropometric characteristics and five physical tests. Mean, standard deviation, and multiple comparisons were used for statistical analyses to find out differences between sexes with ANOVA, and Bonferoni Tests for differences between ages. Anthropometric measurements were reported as body mass index, height, weight, arm span, waist and hip and physical fitness traits such as agility, balance and strength. The findings suggest some differences between female and male students and between ages; male participants obtained higher results as means compared to female participants. Keywords: anthropometrics, agility, balances, strength, students

Clinical evaluation of a computerized topography software method for fitting rigid gas permeable contact lenses.

Science.gov (United States)

Szczotka, L B; Capretta, D M; Lass, J H

1994-10-01

Computerized videokeratoscope software programs now have the ability to assist in the design of rigid gas permeable (RGP) contact lenses and simulate fluorescein patterns. We evaluated the performance of Computed Anatomy's Topographic Modeling System (TMS-1) and its Contact Lens Fitting Program (version 1.41) in fitting RGP lenses in 31 subjects. Computerized topographic analysis, balanced manifest refraction, slit lamp examination, and keratometry were performed. Initial lens parameters were ordered according to manufacturer's programmed recommendations for base curve, power, lens diameter, optic zone diameter, and edge lift. Final lens parameters were based on clinical performance. Lenses were recorded for base curve changes of 0.1 mm or more, power alterations of +/- 0.50 D or more, or for any alteration in diameter/optic zone. Twenty-seven patients were analyzed for all five recommended parameters. Thirteen of 27 patients (48%) required no parameter changes. Nine of 27 patients (33%) required one parameter change, four of 27 patients (15%) required two parameter changes, and one patient (4%) needed three parameters altered. The most prevalent change was a power alteration, required in nine of 27 patients (33%); however, comparisons of all initial to final parameters showed no statistically significant differences. Comparison of initial base curves to that which would have been chosen via standard keratometry also showed no significant difference. This study found the TMS-1 default lens recommendations to be clinically unacceptable. This system, however, could be an alternative method of initial lens selection if used to titrate a fit or if software enhancements are incorporated to account for lens movement and flexure.

The issue of statistical power for overall model fit in evaluating structural equation models

Directory of Open Access Journals (Sweden)

Richard HERMIDA

2015-06-01

Full Text Available Statistical power is an important concept for psychological research. However, examining the power of a structural equation model (SEM is rare in practice. This article provides an accessible review of the concept of statistical power for the Root Mean Square Error of Approximation (RMSEA index of overall model fit in structural equation modeling. By way of example, we examine the current state of power in the literature by reviewing studies in top Industrial-Organizational (I/O Psychology journals using SEMs. Results indicate that in many studies, power is very low, which implies acceptance of invalid models. Additionally, we examined methodological situations which may have an influence on statistical power of SEMs. Results showed that power varies significantly as a function of model type and whether or not the model is the main model for the study. Finally, results indicated that power is significantly related to model fit statistics used in evaluating SEMs. The results from this quantitative review imply that researchers should be more vigilant with respect to power in structural equation modeling. We therefore conclude by offering methodological best practices to increase confidence in the interpretation of structural equation modeling results with respect to statistical power issues.

Evaluation of human fitness for duty in a real working situation

International Nuclear Information System (INIS)

Skof, M.M.

1994-01-01

According to the results of root causes analyzes in the complex highly atomized systems almost 80% of reported events and scrams are due to the human error or malfunction. Nowadays scrams are mostly consequences of human mistakes. Human mistakes are according to the results of root cause analyses consequences of unfitness or inability to perform demanded task. Most of the workers in the system have adequate psychophysiological abilities and basic knowledge. So their performance in a real working situation depends on their fitness for duty or actual availability. Actual availability and consequently human performance depends on: Human abilities (basic human traits); human knowledge (knowledge received in education process and in special training); human motivation (willingness to take part in the activity). Actual availability is the interference of abilities, knowledge and motivation in the real situation and it shapes human performance. Workers are able to self estimate their fitness for duty. On these estimations modelling of human performance in a real situation is possible. By the level of human performance system's performance should be predicted. We have developed questionnaire VTP for self estimations of well-being, mood, fatigue, arousal level, stress and motivation. At the same time data indicating human performance have been collected. Indicators of human performance have been the results on dual task and effectiveness in primary task. Connections between human fitness for duty and human performance have been modelled. Developed model explain the impacts of particular factors of fitness for duty on systems performance. (author). 5 refs, 1 tab

Reliability and Model Fit

Science.gov (United States)

Stanley, Leanne M.; Edwards, Michael C.

2016-01-01

The purpose of this article is to highlight the distinction between the reliability of test scores and the fit of psychometric measurement models, reminding readers why it is important to consider both when evaluating whether test scores are valid for a proposed interpretation and/or use. It is often the case that an investigator judges both the…

Fitness club

CERN Multimedia

Fitness club

2011-01-01

General fitness Classes Enrolments are open for general fitness classes at CERN taking place on Monday, Wednesday, and Friday lunchtimes in the Pump Hall (building 216). There are shower facilities for both men and women. It is possible to pay for 1, 2 or 3 classes per week for a minimum of 1 month and up to 6 months. Check out our rates and enrol at: http://cern.ch/club-fitness Hope to see you among us! CERN Fitness Club fitness.club@cern.ch  

Evaluating M.D.-Level Competence in Internal Medicine.

Science.gov (United States)

Anderson, Alexander S.; Botticelli, Max G.

1981-01-01

The implementation of a clinical clerkship in internal medicine that was flexible in time required that a new evaluation program be developed to assess the progress of students. The progress of the classes of 1979 and 1980 toward achievement of predetermined levels of mastery is presented. (Author/MLW)

Dancers' Body Esteem, Fitness Esteem, and Self-Esteem in Three Contexts

Science.gov (United States)

Van Zelst, Laura; Clabaugh, Alison; Morling, Beth

2004-01-01

Sixty-two college-aged, ballet and modern dancers evaluated their bodies and themselves in different dance and non-dance settings. In a self-report survey design, dancers' body esteem, fitness esteem, and self-esteem (an overall self-evaluation) were measured in three different contexts. Dancers rated their body esteem, fitness esteem, and…

An evaluation of fitness for practice curricula: self-efficacy, support and self-reported competence in preregistration student nurses and midwives.

Science.gov (United States)

Lauder, William; Watson, Roger; Topping, Keith; Holland, Karen; Johnson, Martin; Porter, Mary; Roxburgh, Michelle; Behr, Aga

2008-07-01

This element of the larger Scottish evaluation aimed to explore differences between access routes, cohorts and higher education institutes (HEI) (universities and colleges) in levels of self-efficacy, student support and self-reported competence in a nationally representative sample of student nurses and midwives. This paper reports findings from the National Review of Pre-Registration Nursing and Midwifery Programmes in Scotland. Fitness for practice curricula have been the heart of many recent developments in nurse and midwifery education. Fitness for practice set out to map out the future direction of preregistration nursing and midwifery education with the aim of ensuring fitness for practice based on healthcare need. There have been no national evaluations of the effectiveness of this strategic objective. Previous major evaluations in the 1990s suggested that students may not have had the skills needed to be fit for practice. The study design was a cross-sectional survey of a stratified random sample of student nurses and midwives (n = 777). Data collected included demographic information, generalised perceived self-efficacy, student support and self-reported competency. Students reported high levels of self-reported competency. There were no significant differences between two cohorts or between students with different access routes. Students rated support from family and friends highest and support from HEI lowest. There was a significant difference in support levels between HEI. Self-efficacy scores were similar to other population means and showed small-moderate correlations with self-report competence. Similarly, self-reported competency appears to be at the higher end of the spectrum, although older students may have a more realistic perception of their competence. However, support from HEI was seen as less satisfactory and varied from one institution to another. This study portrays a relatively positive picture of preregistration fitness for practice

[Factors associated with low levels of aerobic fitness among adolescents].

Science.gov (United States)

Gonçalves, Eliane Cristina de Andrade; Silva, Diego Augusto Santos

2016-06-01

To evaluate the prevalence of low aerobic fitness levels and to analyze the association with sociodemographic factors, lifestyle and excess body fatness among adolescents of southern Brazil. The study included 879 adolescents aged 14 to 19 years the city of São José/SC, Brazil. The aerobic fitness was assessed by Canadian modified test of aerobic fitness. Sociodemographic variables (skin color, age, sex, study turn, economic level), sexual maturation and lifestyle (eating habits, screen time, physical activity, consumption of alcohol and tobacco) were assessed by a self-administered questionnaire. Excess body fatness was evaluated by sum of skinfolds triceps and subscapular. We used logistic regression to estimate odds ratios and 95% confidence intervals. Prevalence of low aerobic fitness level was 87.5%. The girls who spent two hours or more in front screen, consumed less than one glass of milk by day, did not smoke and had an excess of body fatness had a higher chance of having lower levels of aerobic fitness. White boys with low physical activity had had a higher chance of having lower levels of aerobic fitness. Eight out of ten adolescents were with low fitness levels aerobic. Modifiable lifestyle factors were associated with low levels of aerobic fitness. Interventions that emphasize behavior change are needed. Copyright © 2015 Sociedade de Pediatria de São Paulo. Publicado por Elsevier Editora Ltda. All rights reserved.

Development of inspection and evaluation guidelines for light water reactor internals

International Nuclear Information System (INIS)

Aoki, T.; Yamashita, H.; Sakai, K.

2002-01-01

Full text: In Japan, before a nuclear power plant reaches its 30 years of operation, the Japanese utilities carry out a 'study on plant life management'. Reflecting the results of that study into the maintenance, the utilities make efforts to maintain and improve the safety and reliability of their nuclear power plants. In this study, all safety related components are evaluated from the viewpoint of aging degradation, assuming a long-term operation. If a crack should be found at components such as reactor internals, which is deemed important for safety and are difficult to repair or replace may provide a serious impact on the plant operation and management. Reactor internals, for instance, made of austenitic stainless steel and nickel base alloy, are not completely free from aging degradation including stress corrosion cracking (SCC). Therefore, it is concluded in the study on plant life management that they are required continuous planned inspections to confirm their integrity while continuing plant operation. If an aging degradation such as SCC should be found at the reactor internals, a great amount of labor and time may be required for root cause investigation and analysis and subsequent repairs because it is very difficult to reach to the degraded portion due to structural, dimensional and environmental restrictions. Therefore, such situations may provide serious impact on plant operation and management. As to the reactor internals and other components with similar characteristics, it is strongly recommended that contingency plan should be prepared in advance. Thus, considering the significance of aging degradation, it is necessary to develop some standard rules for the inspection and evaluation of reactor internals. Such rules should specify when, where and how to inspect. They should also specify the evaluation method in case such degradation as a crack is found, and the repair method and extent if repairs are required. These standard rules must be

Evaluating the Validity of Current Mainstream Wearable Devices in Fitness Tracking Under Various Physical Activities: Comparative Study.

Science.gov (United States)

Xie, Junqing; Wen, Dong; Liang, Lizhong; Jia, Yuxi; Gao, Li; Lei, Jianbo

2018-04-12

Wearable devices have attracted much attention from the market in recent years for their fitness monitoring and other health-related metrics; however, the accuracy of fitness tracking results still plays a major role in health promotion. The aim of this study was to evaluate the accuracy of a host of latest wearable devices in measuring fitness-related indicators under various seminatural activities. A total of 44 healthy subjects were recruited, and each subject was asked to simultaneously wear 6 devices (Apple Watch 2, Samsung Gear S3, Jawbone Up3, Fitbit Surge, Huawei Talk Band B3, and Xiaomi Mi Band 2) and 2 smartphone apps (Dongdong and Ledongli) to measure five major health indicators (heart rate, number of steps, distance, energy consumption, and sleep duration) under various activity states (resting, walking, running, cycling, and sleeping), which were then compared with the gold standard (manual measurements of the heart rate, number of steps, distance, and sleep, and energy consumption through oxygen consumption) and calculated to determine their respective mean absolute percentage errors (MAPEs). Wearable devices had a rather high measurement accuracy with respect to heart rate, number of steps, distance, and sleep duration, with a MAPE of approximately 0.10, whereas poor measurement accuracy was observed for energy consumption (calories), indicated by a MAPE of up to 0.44. The measurements varied for the same indicator measured by different fitness trackers. The variation in measurement of the number of steps was the highest (Apple Watch 2: 0.42; Dongdong: 0.01), whereas it was the lowest for heart rate (Samsung Gear S3: 0.34; Xiaomi Mi Band 2: 0.12). Measurements differed insignificantly for the same indicator measured under different states of activity; the MAPE of distance and energy measurements were in the range of 0.08 to 0.17 and 0.41 to 0.48, respectively. Overall, the Samsung Gear S3 performed the best for the measurement of heart rate under

77 FR 39735 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines

Science.gov (United States)

2012-07-05

... revocation of the antidumping duty orders on stainless steel butt-weld pipe fittings From Italy, Malaysia... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731-TA-865-867 (Second Review)] Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines Determination On the basis of the...

Pathways to use of communication campaigns' evaluation findings within international organizations.

Science.gov (United States)

O'Neil, Glenn; Bauer, Martin W

2018-08-01

This article presents a study on the pathways and processes regarding the use of evaluation findings of communication campaigns from two international organizations, the Office of the High Commissioner for Human Rights (OHCHR) and the International Committee of the Red Cross (ICRC). Several years after the completion of the campaigns and their evaluations, our research identified 28 instances of use and six instances of non-use of the evaluation results, of which the large majority being surprising in nature. Results showed that evaluation use facilitated formal and informal changes at the individual and the organizational level; and, this pattern occurred in a predominantly non-linear fashion, interconnected and overlapping, while gradually decreasing in time and space. Evaluation use was mostly unpredictable, which reflected how meanings are constructed by staff members, as they adjusted and interpreted the findings in opportunistic ways. Copyright © 2018 Elsevier Ltd. All rights reserved.

[The importance of physical activity and fitness for human health].

Science.gov (United States)

Brandes, M

2012-01-01

The decline of physical activity is considered to play an important role in the deterioration of health predictors, such as overweight, and the associated increase of cardiovascular and all-cause mortality. Therefore, most interventional strategies aim for increasing physical activity. Instead of physical activity, some studies use physical fitness as a key variable. Though physical fitness is influenced by genetic factors, physical fitness has to be developed by physical activity. As recent reports demonstrate the prospective associations between physical fitness and health and mortality, these associations are not reported for physical activity. Due to the fact that physical fitness-in contrast to physical activity-is evaluated with standardized laboratory measurements, it appears advisable to assess physical fitness for prospective health perspectives. Although physical fitness is determined by genetics, physical activity is the primary modifiable determinant for increasing physical fitness and should be aimed for to improve physical fitness in interventional strategies.

Contact lenses fitting after intracorneal ring segments implantation in keratoconus

Directory of Open Access Journals (Sweden)

Luciane Bugmann Moreira

2013-08-01

Full Text Available PURPOSE: Evaluate contact lenses fitting after intracorneal ring implantation for keratoconus, its visual acuity and comfort. METHODS: Retrospective study of patients undergoing contact lenses fitting, after intracorneal ring for keratoconus. The criterion for contact lens fitting was unsatisfactory visual acuity with spectacle correction as referred by the patients. All patients were intolerants to contact lenses prior to intracorneal implantation. Visual acuity analysis was done by conversion of Snellen to logMAR scales. The comfort was evaluated according subjective questioning of good, medium or poor comfort. RESULTS: Nineteen patients were included in the study. Two patients (10.5% did not achieved good comfort with contact lenses and underwent penetrating keratoplasties. All the others 17 patients showed good or medium comfort. Four rigid gas-permeable contact lenses were fitted, one piggyback approach, 3 toric soft contact lenses, 2 soft lenses specially design for keratoconus and 7 disposable soft lenses. The average visual acuity improved from 0.77 ± 0.37 to 0.19 ± 0.13 logMAR units after contact lenses fitting. CONCLUSION: Contact lens fitting after intracorneal ring is possible, provides good comfort, improves visual acuity, and therefore, may postpone the need for penetrating keratoplasty.

Evaluation of excess nuclear materials suitability for international safeguards

International Nuclear Information System (INIS)

Newton, J.W.; White, W.C.; Davis, R.M.; Cherry, R.C.

1996-01-01

President Clinton announced in March 1995 the permanent withdrawal of 200 tons of fissile material from the US nuclear stockpile. This action was made possible by the dramatic reduction in nuclear weapons stockpile size and a desire to demonstrate the US'' commitment to nonproliferation goals. To provide further assurance of that commitment, the US is addressing placement of these materials under International Atomic Energy Agency (IAEA) safeguards. An initial step of this overall assessment was evaluation of the nuclear materials'' suitability for international safeguards. US Department of Energy (DOE) field organizations reviewed a detailed listing of all candidate materials with respect to characterization status, security classification, and acceptability for international safeguards compared to specified criteria. These criteria included form, location, environment and safety considerations, measurability, and stability. The evaluation resulted in broad categorizations of all materials with respect to preparing and placing materials under IAEA safeguards and provided essential information for decisions on the timing for offering materials as a function of materials attributes. A plan is being prepared to determine the availability of these materials for IAEA safeguards considering important factors such as costs, processes and facilities required to prepare materials, and impacts on other programs

Mindfulness, burnout, and effects on performance evaluations in internal medicine residents.

Science.gov (United States)

Braun, Sarah E; Auerbach, Stephen M; Rybarczyk, Bruce; Lee, Bennett; Call, Stephanie

2017-01-01

Burnout has been documented at high levels in medical residents with negative effects on performance. Some dispositional qualities, like mindfulness, may protect against burnout. The purpose of the present study was to assess burnout prevalence among internal medicine residents at a single institution, examine the relationship between mindfulness and burnout, and provide preliminary findings on the relation between burnout and performance evaluations in internal medicine residents. Residents (n = 38) completed validated measures of burnout at three time points separated by 2 months and a validated measure of dispositional mindfulness at baseline. Program director end-of-year performance evaluations were also obtained on 22 milestones used to evaluate internal medicine resident performance; notably, these milestones have not yet been validated for research purposes; therefore, the investigation here is exploratory. Overall, 71.1% (n = 27) of the residents met criteria for burnout during the study. Lower scores on the "acting with awareness" facet of dispositional mindfulness significantly predicted meeting burnout criteria χ 2 (5) = 11.88, p = 0.04. Lastly, meeting burnout criteria significantly predicted performance on three of the performance milestones, with positive effects on milestones from the "system-based practices" and "professionalism" domains and negative effects on a milestone from the "patient care" domain. Burnout rates were high in this sample of internal medicine residents and rates were consistent with other reports of burnout during medical residency. Dispositional mindfulness was supported as a protective factor against burnout. Importantly, results from the exploratory investigation of the relationship between burnout and resident evaluations suggested that burnout may improve performance on some domains of resident evaluations while compromising performance on other domains. Implications and directions for future research are discussed.

'This is the beginning of the new me': process evaluation of a group fitness intervention to promote wellbeing in formerly homeless individuals.

Science.gov (United States)

Sofija, Ernesta; Plugge, Melanie; Wiseman, Nicola; Harris, Neil

2018-02-27

Homelessness is a persistent social issue with diverse impacts reaching far beyond individuals. Strategies and research concerning homelessness and health have largely focused on the risk factors and weaknesses of individuals. Such preoccupation has meant the potential strengths and resources within individuals, and so-called strength-based approaches have received less attention. Consequently, understanding how to effectively work with and engage this population in such interventions is limited. The current study presents a process evaluation of an 8-week group fitness intervention in a supportive housing facility. The purpose of the intervention was to increase tenants' physical activity together with opportunities for social interaction and support to, in turn, improve physical and mental wellbeing, and ultimately help individuals re-engage in their community. The evaluation focused on seven key components: context, recruitment, reach/participation, dose delivered, dose received, satisfaction/feedback and fidelity. Data collection methods included observation, attendance records and participant and staff interviews. Findings indicate the intervention was appropriate, well delivered, and enjoyed by participants who highlighted the importance of the sessions for their mental wellbeing and social inclusion. The intervention being conducted on site, the trainers' ability to build good rapport with participants together with the supportive environment they created were central to successful implementation. Group fitness sessions represent a promising intervention to improve wellbeing of this population. However, the need for more personalised care when delivering fitness sessions, due to the complexity of health issues prevalent in this population, was identified. This has implications for already limited resources, including staffing. Strategies to address this are required to ensure the continuity of fitness programs. Impact evaluation to quantify changes

Knowledge translation to fitness trainers: A systematic review

Directory of Open Access Journals (Sweden)

Adamo Kristi B

2010-04-01

Full Text Available Abstract Background This study investigates approaches for translating evidence-based knowledge for use by fitness trainers. Specific questions were: Where do fitness trainers get their evidence-based information? What types of interventions are effective for translating evidence-based knowledge for use by fitness trainers? What are the barriers and facilitators to the use of evidence-based information by fitness trainers in their practice? Methods We describe a systematic review of studies about knowledge translation interventions targeting fitness trainers. Fitness trainers were defined as individuals who provide exercise program design and supervision services to the public. Nurses, physicians, physiotherapists, school teachers, athletic trainers, and sport team strength coaches were excluded. Results Of 634 citations, two studies were eligible for inclusion: a survey of 325 registered health fitness professionals (66% response rate and a qualitative study of 10 fitness instructors. Both studies identified that fitness trainers obtain information from textbooks, networking with colleagues, scientific journals, seminars, and mass media. Fitness trainers holding higher levels of education are reported to use evidence-based information sources such as scientific journals compared to those with lower education levels, who were reported to use mass media sources. The studies identified did not evaluate interventions to translate evidence-based knowledge for fitness trainers and did not explore factors influencing uptake of evidence in their practice. Conclusion Little is known about how fitness trainers obtain and incorporate new evidence-based knowledge into their practice. Further exploration and specific research is needed to better understand how emerging health-fitness evidence can be translated to maximize its use by fitness trainers providing services to the general public.

Age-related decrease in physical activity and functional fitness among elderly men and women

Directory of Open Access Journals (Sweden)

Milanović Z

2013-05-01

Full Text Available Zoran Milanovic,1 Saša Pantelic,1 Nebojša Trajkovic,1 Goran Sporiš,2 Radmila Kostic,1 Nic James31Faculty of Sport and Physical Education, University of Niš, Niš, Serbia; 2Faculty of Kinesiology, University of Zagreb, Zagreb, Croatia; 3London Sport Institute, Middlesex University, London, UKAim: To determine differences in physical activity level and functional fitness between young elderly (60–69 years and old elderly (70–80 years people with the hypothesis that an age-related decline would be found.Methods: A total of 1288 participants’ level of physical activity was evaluated using the International Physical Activity Questionnaire: 594 were male (mean ± standard deviation: body height 175.62 ± 9.78 cm; body weight 82.26 ± 31.33 kg and 694 female (mean ± standard deviation: body height 165.17 ± 23.12 cm; body weight 69.74 ± 12.44 kg. Functional fitness was also estimated using the Senior Fitness Test: back scratch, chair sit and reach, 8-foot up and go, chair stand up for 30 seconds, arm curl, and 2-minute step test.Results: Significant differences (P < 0.05 were found for all Senior Fitness tests between young elderly (60–69 years and old elderly (70–80 men. Similar results were found for the women, except no significant differences were found for the chair sit and reach and the 2-minute step test. From the viewpoint of energy consumption estimated by the International Physical Activity Questionnaire, moderate physical activity is dominant. In addition, with aging, among men and women older than 60 years, the value of the Metabolic Equivalent of Task in total physical activity significantly reduces (P < 0.05.Conclusions: This study found that the reduction in physical activity level and functional fitness was equal for both men and women and was due to the aging process. These differences between young and old elderly people were due to the reduction of muscle strength in both upper and lower limbs and changes in body

International Crimes and Transitional Justice: where does organised crime fit?

Directory of Open Access Journals (Sweden)

Parmentier Stephan

2010-03-01

Full Text Available The last twenty years, since the fall of the Berlin wall in 1989, more than 120 violent conflicts waged across the globe and hundreds of thousands of people killed, disappeared, handicapped or left in distress.Violent conflicts involve frequent human rights violations as well as many crimes. These kinds of crimes are usually very serious and tend to involve many victims, and have attracted attention from a variety of disciplines, including social and political scientists and (criminal lawyers. Therefore, the author argues that criminology as an academic discipline has until recently hardly been interested in studying international crimes.In order to understand this, the author is firstly interested in sketching the background of the concept of international crimes and comparing it with the notion of political crimes and also with that of serious human rights violations. Secondly, international crimes will be situated in their political context of transitional justice and its links with organized crime will be explored.

ITEM LEVEL DIAGNOSTICS AND MODEL - DATA FIT IN ITEM ...

African Journals Online (AJOL)

Global Journal

Item response theory (IRT) is a framework for modeling and analyzing item response ... data. Though, there is an argument that the evaluation of fit in IRT modeling has been ... National Council on Measurement in Education ... model data fit should be based on three types of ... prediction should be assessed through the.

In vitro evaluation of prosthodontic impression on natural dentition: a comparison between traditional and digital techniques

Science.gov (United States)

MALAGUTI, G.; ROSSI, R.; MARZIALI, B.; ESPOSITO, A.; BRUNO, G.; DARIOL, C.; DI FIORE, A.

2016-01-01

SUMMARY Objectives The aim of this in vitro study is to evaluate the marginal and internal fit of zirconia core crowns manufactured following different digital and traditional workflows. Methods A 6° taper shoulder prepared abutment tooth was used to produce 20 zirconia core crowns using four different scanning techniques: scanned directly with the extraoral lab scanner, scanned with intraoral scanner, dental impressions using individual dental tray and polyether, dental casts from a polyether impressions. Marginal and internal fits were evaluated with digital photography and the silicone replica method. Results Medium marginal gaps were 76,00 μm ± 28.9 for extraoral lab scanner, 80.50 μm ± 36,2 for intraoral scanner, 88.10 μm ± 34,8 for dental impression scan and 112,4 μm ± 37,2 for dental cast scan. Medium internal gaps were 23.20 μm ± 10,3 for extraoral lab scanner, 16.20 μm ± 8.3 for intraoral scanner, 27.20 μm ± 16.7 for dental impression scan and 30.20 μm ± 12.7 for dental cast scan. Conclusion Internal gap were extensively lower than 70 μm described in literature. Marginal fit was higher than ideal values for all the techniques but within the limit of clinical success. Intraoral scanners obtained the best results for internal gap. PMID:28280529

HOW INTERNAL RISK - BASED AUDIT APPRAISES THE EVALUATION OF RISKS MANAGEMENT

Directory of Open Access Journals (Sweden)

N. Dorosh

2017-09-01

Full Text Available The article deals with the nature and function of the internal risk-based audit process approach to create patterns of risks and methods of evaluation. Deals with the relationship between the level of maturity of the risk of the company and the method of risk-based internal audit. it was emphasized that internal auditing provides an independent and objective opinion to an organization’s management as to whether its risks are being managed to acceptable levels.

Juxtaposing Sport and Public Health: The Case of Fit University, Inc.

OpenAIRE

Antonio S. Williams; Benjamin K. Wright; Crystal T. Williams

2014-01-01

The purpose of this research was to examine a childhood obesity initiative that successfully used strategic brand management as a fundamental aspect of its mission and goal to promote physical activity through sport, fitness, and education. Using the case study approach, we evaluated Fit University, Inc. (Fit U) in order to identify brand-related characteristics of a successful public health initiative using sport, fitness and education to reduce childhood obesity. The re- searchers and creat...

Comparative evaluation of marginal fit and axial wall adaptability of copings fabricated by metal laser sintering and lost-wax technique: An in vitro study.

Science.gov (United States)

Gaikwad, Bhushan Satish; Nazirkar, Girish; Dable, Rajani; Singh, Shailendra

2018-01-01

The present study aims to compare and evaluate the marginal fit and axial wall adaptability of Co-Cr copings fabricated by metal laser sintering (MLS) and lost-wax (LW) techniques using a stereomicroscope. A stainless steel master die assembly was fabricated simulating a prepared crown; 40 replicas of master die were fabricated in gypsum type IV and randomly divided in two equal groups. Group A coping was fabrication by LW technique and the Group B coping fabrication by MLS technique. The copings were seated on their respective gypsum dies and marginal fit was measured using stereomicroscope and image analysis software. For evaluation of axial wall adaptability, the coping and die assembly were embedded in autopolymerizing acrylic resin and sectioned vertically. The discrepancies between the dies and copings were measured along the axial wall on each halves. The data were subjected to statistical analysis using unpaired t -test. The mean values of marginal fit for copings in Group B (MLS) were lower (24.6 μm) than the copings in Group A (LW) (39.53 μm), and the difference was statistically significant ( P adaptability in comparison with copings fabricated by the LW technique. However, the values of marginal fit of copings fabricated that the two techniques were within the clinically acceptable limit (<50 μm).

Evaluation of the Marginal Fit of CAD/CAM Crowns Fabricated Using Two Different Chairside CAD/CAM Systems on Preparations of Varying Quality.

Science.gov (United States)

Renne, Walter; Wolf, Bethany; Kessler, Raymond; McPherson, Karen; Mennito, Anthony S

2015-01-01

This study evaluated the marginal gap of crowns fabricated using two new chairside computer-aided design/computer-aided manufacturing systems on preparations completed by clinicians with varying levels of expertise to identify whether common preparation errors affect marginal fit. The null hypothesis is that there is no difference in the mean marginal gaps of restorations of varying qualities and no difference in the mean marginal gap size between restorations fabricated using the PlanScan (D4D, Richardson, TX, USA) and the CEREC Omnicam (Sirona, Bensheim, Germany). The fit of 80 lithium disilicate crowns fabricated with the E4D PlanScan or CEREC Omnicam systems on preparations of varying quality were examined for marginal fit by using the replica technique. These same preparations were then visually examined against common criteria for anterior all-ceramic restorations and placed in one of four categories: excellent, good, fair, and poor. Linear mixed modeling was used to evaluate associations between marginal gap, tooth preparation rating, and fabrication machine. The fit was not significantly different between both systems across all qualities of preparation. The average fit was 104 μm for poor-quality preparations, 87.6 μm for fair preparations, 67.2 μm for good preparations, and 36.6 μm for excellent preparations. The null hypothesis is rejected. It can be concluded that preparation quality has a significant impact on marginal gap regardless of which system is used. However, no significant difference was found when comparing the systems to each other. Within the limitations of this in vitro study, it can be concluded that crown preparation quality has a significant effect on marginal gap of the restoration when the clinician uses either CEREC Omnicam or E4D PlansScan. © 2015 Wiley Periodicals, Inc.

45 CFR 2516.820 - What types of internal evaluation activities are required of programs?

Science.gov (United States)

2010-10-01

... required to: (a) Continuously assess management effectiveness, the quality of services provided, and the satisfaction of both participants and service recipients. Internal evaluations should seek frequent feedback... 45 Public Welfare 4 2010-10-01 2010-10-01 false What types of internal evaluation activities are...

Using Movement Test to Evaluate Effectiveness of Health and Fitness Activities of Students in Higher Education Institutions

Directory of Open Access Journals (Sweden)

S. Pashkevich

2018-03-01

Full Text Available The study objective is to evaluate the possibility of using screening methods for determining the effectiveness of health and fitness activities of students in higher education institutions. Materials and methods. The participants in the experiment were 37 first-year students (17 boys and 20 girls of the School of History of H. S. Skovoroda Kharkiv National Pedagogical University. The experiment lasted during the fall semester. Using the Framingham method for analyzing weekly timing, the study conducted a survey among the students on their level of motor activity and performed a functional movement screen testing. To tentatively evaluate the cause and effect relationship between the level of motor activity and the occurrence of a pathological movement pattern, the study used the Spearman’s rank correlation coefficient. The characteristics between the groups were analyzed by using the Mann-Whitney test for comparing the distribution of ordinal variables. Results. The correlation analysis showed that the first-year students’ motor activity was positively related to the results of functional movement screening (R=+0.69, p< 0.05. At the same time, the students (EG1 who mainly had a high level of physical activity at physical education classes showed low values of functional movement evaluation, compared to the students (EG2 participating in extra-curricular physical activity. In EG1, the overall screening score was 10.3±0.7, in EG2 — 14.2±0.9 (p<0.05. Conclusions. The students with insufficient weekly motor activity had risk values of the test (10.3±0.7, which requires further analysis of the causes of a pathological movement pattern. The study results have confirmed the existence of the relationship between motor activity indicators and functional movement evaluation (R=+0.69, p<0.05. This provides a way to use the screening method of determining motor competence for the effectiveness evaluation of health and fitness programs, but further

Scattering factor evaluation for internal dose assessment due to 60Co

International Nuclear Information System (INIS)

Gautam, Y.P.; Kumar, A.; Sharma, S.; Sharma, A.K.; Dube, B.; Hegde, A.G.

2008-01-01

Guidelines for the assessment of internal doses from monitoring suggest default measurement of uncertainties (i.e. lognormal scattering factor, SF) to be used for different types of monitoring data. In this paper, SF values have been evaluated for internal contamination due to 60 Co in two cases using whole body counting data. SF values of 1.04 and 1.03 were obtained for case I and II respectively while SF value of 1.03 was obtained using bioassay data for case I. SF evaluated is in good agreement with the default values given by IDEAS guidelines. (author)

Fitness Club

CERN Multimedia

Fitness Club

2012-01-01

Open to All: http://cern.ch/club-fitness  fitness.club@cern.ch Boxing Your supervisor makes your life too tough ! You really need to release the pressure you've been building up ! Come and join the fit-boxers. We train three times a week in Bd 216, classes for beginners and advanced available. Visit our website cern.ch/Boxing General Fitness Escape from your desk with our general fitness classes, to strengthen your heart, muscles and bones, improve you stamina, balance and flexibility, achieve new goals, be more productive and experience a sense of well-being, every Monday, Wednesday and Friday lunchtime, Tuesday mornings before work and Thursday evenings after work – join us for one of our monthly fitness workshops. Nordic Walking Enjoy the great outdoors; Nordic Walking is a great way to get your whole body moving and to significantly improve the condition of your muscles, heart and lungs. It will boost your energy levels no end. Pilates A body-conditioning technique de...

Test of Gross Motor Development : Expert Validity, confirmatory validity and internal consistence

Directory of Open Access Journals (Sweden)

Nadia Cristina Valentini

2008-12-01

Full Text Available The Test of Gross Motor Development (TGMD-2 is an instrument used to evaluate children’s level of motordevelopment. The objective of this study was to translate and verify the clarity and pertinence of the TGMD-2 items by expertsand the confirmatory factorial validity and the internal consistence by means of test-retest of the Portuguese TGMD-2. Across-cultural translation was used to construct the Portuguese version. The participants of this study were 7 professionalsand 587 children, from 27 schools (kindergarten and elementary from 3 to 10 years old (51.1% boys and 48.9% girls.Each child was videotaped performing the test twice. The videotaped tests were then scored. The results indicated thatthe Portuguese version of the TGMD-2 contains clear and pertinent motor items; demonstrated satisfactory indices ofconfirmatory factorial validity (χ2/gl = 3.38; Goodness-of-fit Index = 0.95; Adjusted Goodness-of-fit index = 0.92 and Tuckerand Lewis’s Index of Fit = 0.83 and test-retest internal consistency (locomotion r = 0.82; control of object: r = 0.88. ThePortuguese TGMD-2 demonstrated validity and reliability for the sample investigated.

Test of Gross Motor Development: expert validity, confirmatory validity and internal consistence

Directory of Open Access Journals (Sweden)

Nadia Cristina Valentini

2008-01-01

The Test of Gross Motor Development (TGMD-2 is an instrument used to evaluate children’s level of motor development. The objective of this study was to translate and verify the clarity and pertinence of the TGMD-2 items by experts and the confirmatory factorial validity and the internal consistence by means of test-retest of the Portuguese TGMD-2. A cross-cultural translation was used to construct the Portuguese version. The participants of this study were 7 professionals and 587 children, from 27 schools (kindergarten and elementary from 3 to 10 years old (51.1% boys and 48.9% girls. Each child was videotaped performing the test twice. The videotaped tests were then scored. The results indicated that the Portuguese version of the TGMD-2 contains clear and pertinent motor items; demonstrated satisfactory indices of confirmatory factorial validity (÷2/gl = 3.38; Goodness-of-fit Index = 0.95; Adjusted Goodness-of-fit index = 0.92 and Tucker and Lewis’s Index of Fit = 0.83 and test-retest internal consistency (locomotion r = 0.82; control of object: r = 0.88. The Portuguese TGMD-2 demonstrated validity and reliability for the sample investigated.

Evaluation of internal noise methods for Hotelling observer models

International Nuclear Information System (INIS)

Zhang Yani; Pham, Binh T.; Eckstein, Miguel P.

2007-01-01

The inclusion of internal noise in model observers is a common method to allow for quantitative comparisons between human and model observer performance in visual detection tasks. In this article, we studied two different strategies for inserting internal noise into Hotelling model observers. In the first strategy, internal noise was added to the output of individual channels: (a) Independent nonuniform channel noise, (b) independent uniform channel noise. In the second strategy, internal noise was added to the decision variable arising from the combination of channel responses. The standard deviation of the zero mean internal noise was either constant or proportional to: (a) the decision variable's standard deviation due to the external noise, (b) the decision variable's variance caused by the external noise, (c) the decision variable magnitude on a trial to trial basis. We tested three model observers: square window Hotelling observer (HO), channelized Hotelling observer (CHO), and Laguerre-Gauss Hotelling observer (LGHO) using a four alternative forced choice (4AFC) signal known exactly but variable task with a simulated signal embedded in real x-ray coronary angiogram backgrounds. The results showed that the internal noise method that led to the best prediction of human performance differed across the studied model observers. The CHO model best predicted human observer performance with the channel internal noise. The HO and LGHO best predicted human observer performance with the decision variable internal noise. The present results might guide researchers with the choice of methods to include internal noise into Hotelling model observers when evaluating and optimizing medical image quality

The nature and prevalence of injury during CrossFit training.

Science.gov (United States)

Hak, Paul Taro; Hodzovic, Emil; Hickey, Ben

2013-11-22

CrossFit is a constantly varied, high intensity, functional movement strength and conditioning program which has seen a huge growth in popularity around the world since its inception twelve years ago. There has been much criticism as to the potential injuries associated with CrossFit training including rhabdomyolysis and musculoskeletal injuries. However to date no evidence exists in the literature to the injures and rates sustained. The purpose of this study was to determine the injury rates and profiles of CrossFit athletes sustained during routine CrossFit training. An online questionnaire was distributed amongst international CrossFit online forums. Data collected included general demographics, training programs, injury profiles and supplement use. A total of 132 responses were collected with 97 (73.5%) having sustained an injury during CrossFit training. A total of 186 injuries were reported with 9 (7.0%) requiring surgical intervention. An injury rate of 3.1 per 1000 hours trained was calculated. No incidences of rhabdomyolysis were reported. Injury rates with CrossFit training are similar to that reported in the literature for sports such as Olympic weight-lifting, power-lifting and gymnastics and lower than competitive contact sports such as rugby union and rugby league. Shoulder and spine injuries predominate with no incidences of rhabdomyolysis obtained. To our knowledge this is the first paper in the literature detailing the injury rates and profiles with CrossFit participation.

Recent advances in the theory and application of fitness landscapes

CERN Document Server

Engelbrecht, Andries

2014-01-01

This book is concerned with recent advances in fitness landscapes. The concept of fitness landscapes originates from theoretical biology and refers to a framework for analysing and visualizing the relationships between genotypes, phenotypes and fitness. These relationships lay at the centre of attempts to mathematically describe evolutionary processes and evolutionary dynamics.     The book addresses recent advances in the understanding of fitness landscapes in evolutionary biology and evolutionary computation. In the volume, experts in the field of fitness landscapes present these findings in an integrated way to make it accessible to a number of audiences: senior undergraduate and graduate students in computer science, theoretical biology, physics, applied mathematics and engineering, but also researcher looking for a reference or/and entry point into using fitness landscapes for analysing algorithms. Also practitioners wanting to employ fitness landscape techniques for evaluating bio- and nature-inspired...

FITS: a function-fitting program

Energy Technology Data Exchange (ETDEWEB)

Balestrini, S.J.; Chezem, C.G.

1982-01-01

FITS is an iterating computer program that adjusts the parameters of a function to fit a set of data points according to the least squares criterion and then lists and plots the results. The function can be programmed or chosen from a library that is provided. The library can be expanded to include up to 99 functions. A general plotting routine, contained in the program but useful in its own right, is described separately in an Appendix.

Fitness evaluation of two Brazilian Aedes aegypti field populations with distinct levels of resistance to the organophosphate temephos

Directory of Open Access Journals (Sweden)

Thiago Affonso Belinato

2012-11-01

Full Text Available In Brazil, decades of dengue vector control using organophosphates and pyrethroids have led to dissemination of resistance. Although these insecticides have been employed for decades against Aedes aegypti in the country, knowledge of the impact of temephos resistance on vector viability is limited. We evaluated several fitness parameters in two Brazilian Ae. aegypti populations, both classified as deltamethrin resistant but with distinct resistant ratios (RR for temephos. The insecticide-susceptible Rockefeller strain was used as an experimental control. The population presenting the higher temephos resistance level, Aparecida de Goiânia, state of Goiás (RR95 of 19.2, exhibited deficiency in the following four parameters: blood meal acceptance, amount of ingested blood, number of eggs and frequency of inseminated females. Mosquitoes from Boa Vista, state of Roraima, the population with lower temephos resistance level (RR95 of 7.4, presented impairment in only two parameters, blood meal acceptance and frequency of inseminated females. These results indicate that the overall fitness handicap was proportional to temephos resistance levels. However, it is unlikely that these disabilities can be attributed solely to temephos resistance, since both populations are also resistant to deltamethrin and harbour the kdr allele, which indicates resistance to pyrethroids. The effects of reduced fitness in resistant populations are discussed.

IRPhEP-handbook, International Handbook of Evaluated Reactor Physics Benchmark Experiments

International Nuclear Information System (INIS)

Sartori, Enrico; Blair Briggs, J.

2008-01-01

1 - Description: The purpose of the International Reactor Physics Experiment Evaluation Project (IRPhEP) is to provide an extensively peer-reviewed set of reactor physics-related integral data that can be used by reactor designers and safety analysts to validate the analytical tools used to design next-generation reactors and establish the safety basis for operation of these reactors. This work of the IRPhEP is formally documented in the 'International Handbook of Evaluated Reactor Physics Benchmark Experiments,' a single source of verified and extensively peer-reviewed reactor physics benchmark measurements data. The IRPhE Handbook is available on DVD. You may request a DVD by completing the DVD Request Form available at: http://irphep.inl.gov/handbook/hbrequest.shtml The evaluation process entails the following steps: 1. Identify a comprehensive set of reactor physics experimental measurements data, 2. Evaluate the data and quantify overall uncertainties through various types of sensitivity analysis to the extent possible, verify the data by reviewing original and subsequently revised documentation, and by talking with the experimenters or individuals who are familiar with the experimental facility, 3. Compile the data into a standardized format, 4. Perform calculations of each experiment with standard reactor physics codes where it would add information, 5. Formally document the work into a single source of verified and peer reviewed reactor physics benchmark measurements data. The International Handbook of Evaluated Reactor Physics Benchmark Experiments contains reactor physics benchmark specifications that have been derived from experiments that were performed at various nuclear experimental facilities around the world. The benchmark specifications are intended for use by reactor physics personal to validate calculational techniques. The 2008 Edition of the International Handbook of Evaluated Reactor Physics Experiments contains data from 25 different

GANODERMA LUCIDUM IMPROVES PHYSICAL FITNESS IN WOMEN WITH FIBROMYALGIA.

Science.gov (United States)

Collado Mateo, Daniel; Pazzi, Francesco; Domínguez Muñoz, Francisco J; Martín Martínez, Juan Pedro; Olivares, Pedro R; Gusi, Narcis; Adsuar, José C

2015-11-01

fibromyalgia is a chronic disease characterized by generalized pain, stiffness, poor physical conditioning, non-restorative sleep and poor health-related quality of life. Ganoderma lucidum a type of mushroom that has demonstrated several benefits in different populations. Ceratonia siliqua is a natural therapy rich in antioxidants with potential benefits on health. to evaluate the effects of 6-week treatment of Ganoderma lucidum and Ceratonia siliqua on physical fitness in patients suffering from fibromyalgia. sixty-four women with fibromyalgia participated in the study. They took 6 g of Ganoderma lucidum or Ceratonia siliqua per day for 6 weeks. Different fitness tests were selected in order to evaluate functional capacity. after the 6-week treatment period, Ganoderma lucidum significantly improved aerobic endurance, lower body flexibility, and velocity (p Ganoderma lucidum may improve physical fitness in women with fibromyalgia, whereas, Ceratonia siliqua seemed to be ineffective at increasing physical fitness. These results may indicate that Ganoderma lucidum might be a useful dietary supplement to enhance physical performance of the patients suffering from fibromyalgia. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Consideration on evaluation of internal pressure creep rupture for tube with circumferential joint

International Nuclear Information System (INIS)

Nagato, Kotaro; Satoh, Keisuke

1983-01-01

The behavior of internal pressure creep rupture of the thin-walled cylinders with circumferential joints is affected by the combination of creep characteristics of parent materials and weld metals. In particular, the compatibility of the creep strain rate of parent materials and weld metals becomes an important controlling factor. The behavior of internal pressure creep of the welded parts in circumferential joint cylinders can be evaluated simply with the uniaxial creep data of parent materials and weld metals, considering it by approximately substituting with the creep behavior of a uniaxial longitudinal joint. The method of evaluation is, first, to analyze the breaking behavior of uniaxial longitudinal joints using the uniaxial creep characteristic values of parent materials and weld metals, and next, by combining the equation for the relation between the rupture times of uniaxial creep and internal pressure creep with the analyzed breaking behavior of uniaxial joints, the internal pressure creep rupture behavior of the cylinders with circumferential joints can be evaluated. The internal pressure creep behavior of the thin-walled cylinders with circumferential joints, their rupture life and the uniaxial creep rupture life of longitudinal joints, and the examination of Hastelloy X cylinders are reported. (Kako, I.)

Fitness Club

CERN Multimedia

Fitness Club

2011-01-01

The CERN Fitness Club is organising Zumba Classes on the first Wednesday of each month, starting 7 September (19.00 – 20.00). What is Zumba®? It’s an exhilarating, effective, easy-to-follow, Latin-inspired, calorie-burning dance fitness-party™ that’s moving millions of people toward joy and health. Above all it’s great fun and an excellent work out. Price: 22 CHF/person Sign-up via the following form: https://espace.cern.ch/club-fitness/Lists/Zumba%20Subscription/NewForm.aspx For more info: fitness.club@cern.ch

Evaluating the Level of Internal Control System in the Management of Financial Security of Bank

Directory of Open Access Journals (Sweden)

Pidvysotska Lyudmyla J.

2017-06-01

Full Text Available The article is aimed at studying the organization and technology of evaluation process of the internal control system of bank in order to ensure financial security management of its activities. The work of the internal audit service on monitoring and evaluating the performance of the bank’s internal control system was analyzed. It has been found that improving the level of financial security of commercial banks is conditional upon improvements in the quality of audits and the provision of sound and objective conclusions. The interrelation of the tasks of internal audit service and the tasks of bank’s financial security management has been determined. Methodological recommendations on evaluation of the bank’s internal control system on the basis of results of audit have been proposed.

Exploring the Fitness Centre Industry in Malaysia; What Factors Influence Joining and Retention and Prevents People from Joining

OpenAIRE

Smith, Helen B

2008-01-01

Malaysia’s fitness centre industry has seen rapid growth over the last 6 years with the opening of more than 25 international chain outlets of which the majority is owned by California Fitness, Celebrity Fitness, Fitness First and True Fitness. An increasing population and year on year GDP growth, together with the support of the Malaysian government, contribute to further the growth of the industry. The purpose of the study is to explore, investigate and reveal information about the growth a...

Internal Friction And Instabilities Of Rotors

Science.gov (United States)

Walton, J.; Artiles, A.; Lund, J.; Dill, J.; Zorzi, E.

1992-01-01

Report describes study of effects of internal friction on dynamics of rotors prompted by concern over instabilities in rotors of turbomachines. Theoretical and experimental studies described. Theoretical involved development of nonlinear mathematical models of internal friction in three joints found in turbomachinery - axial splines, Curvic(TM) splines, and interference fits between smooth cylindrical surfaces. Experimental included traction tests to determine the coefficients of friction of rotor alloys at various temperatures, bending-mode-vibration tests of shafts equipped with various joints and rotordynamic tests of shafts with axial-spline and interference-fit joints.

Induced subgraph searching for geometric model fitting

Science.gov (United States)

Xiao, Fan; Xiao, Guobao; Yan, Yan; Wang, Xing; Wang, Hanzi

2017-11-01

In this paper, we propose a novel model fitting method based on graphs to fit and segment multiple-structure data. In the graph constructed on data, each model instance is represented as an induced subgraph. Following the idea of pursuing the maximum consensus, the multiple geometric model fitting problem is formulated as searching for a set of induced subgraphs including the maximum union set of vertices. After the generation and refinement of the induced subgraphs that represent the model hypotheses, the searching process is conducted on the "qualified" subgraphs. Multiple model instances can be simultaneously estimated by solving a converted problem. Then, we introduce the energy evaluation function to determine the number of model instances in data. The proposed method is able to effectively estimate the number and the parameters of model instances in data severely corrupted by outliers and noises. Experimental results on synthetic data and real images validate the favorable performance of the proposed method compared with several state-of-the-art fitting methods.

How to investigate fitness to drive of patients with Alzheimer’s dementia

NARCIS (Netherlands)

Piersma, Dafne; de Waard, Dick; Fuermaier, Anselm; Davidse, Ragnhild; Bredewoud, Ruud; Brouwer, Wiebo; Tucha, Oliver

2016-01-01

Introduction In early stages of Alzheimer’s dementia, some patients are still fit to drive, but others are not (Ernst et al., 2010). Therefore, fitness to drive should be evaluated when people have been diagnosed with dementia. The gold standard to determine fitness to drive is an on-road assessment

a comparative study on different bmi category and physical fitness ...

African Journals Online (AJOL)

2017-08-08

Aug 8, 2017 ... International License. Libraries Resour. A COMPARATIVE STUDY ON DIFF. FITNESS HEALTH RELATED COMP. V. Eswaramoorthi. 2,3. , M. R. Abdullah. Kosni. 2. , N. Alias. 1. East Coast Environmental Research Ins. Badak Campus, Kuala Teren. 2. Faculty of Applied Social Science,. Kuala Terengganu 2.

CURVE LSFIT, Gamma Spectrometer Calibration by Interactive Fitting Method

International Nuclear Information System (INIS)

Olson, D.G.

1992-01-01

1 - Description of program or function: CURVE and LSFIT are interactive programs designed to obtain the best data fit to an arbitrary curve. CURVE finds the type of fitting routine which produces the best curve. The types of fitting routines available are linear regression, exponential, logarithmic, power, least squares polynomial, and spline. LSFIT produces a reliable calibration curve for gamma ray spectrometry by using the uncertainty value associated with each data point. LSFIT is intended for use where an entire efficiency curve is to be made starting at 30 KeV and continuing to 1836 KeV. It creates calibration curves using up to three least squares polynomial fits to produce the best curve for photon energies above 120 KeV and a spline function to combine these fitted points with a best fit for points below 120 KeV. 2 - Method of solution: The quality of fit is tested by comparing the measured y-value to the y-value calculated from the fitted curve. The fractional difference between these two values is printed for the evaluation of the quality of the fit. 3 - Restrictions on the complexity of the problem - Maxima of: 2000 data points calibration curve output (LSFIT) 30 input data points 3 least squares polynomial fits (LSFIT) The least squares polynomial fit requires that the number of data points used exceed the degree of fit by at least two

The status of proliferation resistance evaluation methodology development in GEN IV international forum

International Nuclear Information System (INIS)

Inoue, Naoko; Kawakubo, Yoko; Seya, Michio; Suzuki, Mitsutoshi; Kuno, Yusuke; Senzaki, Masao

2010-01-01

The Generation IV Nuclear Energy Systems International Forum (GIF) Proliferation Resistance and Physical Protection Working Group (PR and PP WG) was established in December 2002 in order to develop the PR and PP evaluation methodology for GEN IV nuclear energy systems. The methodology has been studied and established by international consensus. The PR and PP WG activities include development of the measures and metrics; establishment of the framework of PR and PP evaluation, the demonstration study using Example Sodium Fast Reactor (ESFR), which included the development of three evaluation approaches; the Case Study using ESFR and four kinds of threat scenarios; the joint study with GIF System Steering Committees (SSCs) of the six reactor design concepts; and the harmonization study with the IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). This paper reviews the status of GIF PR and PP studies and identifies the challenges and directions for applying the methodology to evaluate future nuclear energy systems in Japan. (author)

Success factors for international HTA projects: evaluating EUnetHTA Joint Action as an exemplar.

Science.gov (United States)

Guegan, Eleanor Woodford; Cook, Andrew

2014-11-01

Evaluation is essential for the management of international projects or networks in health technology assessment (HTA). It extends beyond the normal process of project management by incorporating qualitative dimensions and provides information about a project's effectiveness and achievements. This article aimed to identify the factors that are important for the success of international HTA projects. The European network for Health Technology Assessment Joint Action (EUnetHTA JA) is presented as an exemplar. METHODS for the evaluation of international HTA projects include interviews, focus groups, questionnaires, observations and documentary review, and the key points of these approaches have been summarized. The impact and effectiveness of the EUnetHTA JA was evaluated by questionnaires of project participants and external stakeholders, and by documentary review. The response rate for the three annual questionnaires sent to project participants ranged from 86 percent to 88 percent and for external stakeholders ranged from 65 percent to 88 percent. Key factors for project success included production of deliverables according to the workplan, achievement of objectives, added value generated, effective communication, involvement of external stakeholders, workstream management and progress from the preceding EUnetHTA 2006-2008 project. The experience of this project can inform the evaluation of future international HTA collaborations, such as the EUnetHTA 2nd Joint Action and HTAsiaLink. A high response rate was achieved to the self-completion questionnaires and the strategy followed is recommended for evaluation of international HTA projects. Future assessments of international HTA projects should strive to measure outcomes and impact, not just outputs and process.

Fitness cost

DEFF Research Database (Denmark)

Nielsen, Karen L.; Pedersen, Thomas M.; Udekwu, Klas I.

2012-01-01

phage types, predominantly only penicillin resistant. We investigated whether isolates of this epidemic were associated with a fitness cost, and we employed a mathematical model to ask whether these fitness costs could have led to the observed reduction in frequency. Bacteraemia isolates of S. aureus...... from Denmark have been stored since 1957. We chose 40 S. aureus isolates belonging to phage complex 83A, clonal complex 8 based on spa type, ranging in time of isolation from 1957 to 1980 and with varyous antibiograms, including both methicillin-resistant and -susceptible isolates. The relative fitness...... of each isolate was determined in a growth competition assay with a reference isolate. Significant fitness costs of 215 were determined for the MRSA isolates studied. There was a significant negative correlation between number of antibiotic resistances and relative fitness. Multiple regression analysis...

Amino acids intake and physical fitness among adolescents.

Science.gov (United States)

Gracia-Marco, Luis; Bel-Serrat, Silvia; Cuenca-Garcia, Magdalena; Gonzalez-Gross, Marcela; Pedrero-Chamizo, Raquel; Manios, Yannis; Marcos, Ascensión; Molnar, Denes; Widhalm, Kurt; Polito, Angela; Vanhelst, Jeremy; Hagströmer, Maria; Sjöström, Michael; Kafatos, Anthony; de Henauw, Stefaan; Gutierrez, Ángel; Castillo, Manuel J; Moreno, Luis A

2017-06-01

The aim was to investigate whether there was an association between amino acid (AA) intake and physical fitness and if so, to assess whether this association was independent of carbohydrates intake. European adolescents (n = 1481, 12.5-17.5 years) were measured. Intake was assessed via two non-consecutive 24-h dietary recalls. Lower and upper limbs muscular fitness was assessed by standing long jump and handgrip strength tests, respectively. Cardiorespiratory fitness was assessed by the 20-m shuttle run test. Physical activity was objectively measured. Socioeconomic status was obtained via questionnaires. Lower limbs muscular fitness seems to be positively associated with tryptophan, histidine and methionine intake in boys, regardless of centre, age, socioeconomic status, physical activity and total energy intake (model 1). However, these associations disappeared once carbohydrates intake was controlled for (model 2). In girls, only proline intake seems to be positively associated with lower limbs muscular fitness (model 2) while cardiorespiratory fitness seems to be positively associated with leucine (model 1) and proline intake (models 1 and 2). None of the observed significant associations remained significant once multiple testing was controlled for. In conclusion, we failed to detect any associations between any of the evaluated AAs and physical fitness after taking into account the effect of multiple testing.

The Evaluation of Feed-in Tariff Models for Photovoltaic System in Thailand

Directory of Open Access Journals (Sweden)

Sagulpongmalee Kangsadan

2016-01-01

Full Text Available Thailand is targeted to reach 6,000 MW of total installed PV capacity by 2036. Feed-in tariff (FIT was one of the most successful PV mechanisms of Thailand for promoting PV generated electricity. The evaluation of the FIT models for PV in Thailand which was designed 3 models such as premium price FIT model (Adder in the first FIT policy to motivate attention on investment in PV power plant. After that used fixed price FIT model for PV ground-mounted and front-end loaded FIT model for solar rooftop. In addition to, Thailand has project-specific tariff design which FIT rates are differentiated tariff payment levels by technology, capacity size, and quality of the resource. As result of FIT policies, the PV installation is 1,287 MW of cumulative capacity in 2014. Furthermore, the financial evaluation of FIT for PV project in Thailand found that Net Present Value (NPV 32.97 million Baht, Internal Rate of Return (IRR 13.22%, payback period 8.86 years and B/C ratio was 1.66 which must be implemented in conjunction with other financial support measures such as low interest loans, tax benefits, etc. The several incentives to promote PV in Thailand especially FIT shown as PV projects are to be profitable and incentives to investors.

After the Higgs: status and prospects of the electroweak fit of the SM and beyond -- with Gfitter

CERN Multimedia

CERN. Geneva

2013-01-01

models are also obtained, through an analysis of the so-called oblique parameters. We discuss the impact of the electroweak fit on Higgs coupling studies and vice versa. Future measurements at the Large Hadron Collider and the International Linear Collider promise to improve the experimental precision of key observables used in the fit. We present the prospects of the global electroweak fit in view of these improvements.

Evaluation of the expression of internal control transcripts by real ...

African Journals Online (AJOL)

Evaluation of the expression of internal control transcripts by real-time RT-PCR analysis during tomato flower abscission. Song Gao, Tao Xu, Mingfang Qi, Yufeng Liu, Hong Li, Shuangshuang Lv, Jinhong Li, Tianlai Li ...

The Escherichia coli transcriptome linked to growth fitness

Directory of Open Access Journals (Sweden)

Bei-Wen Ying

2016-03-01

Full Text Available A series of Escherichia coli strains with varied genomic sequences were subjected to high-density microarray analyses to elucidate the fitness-correlated transcriptomes. Fitness, which is commonly evaluated by the growth rate during the exponential phase, is not only determined by the genome but is also linked to growth conditions, e.g., temperature. We previously reported genetic and environmental contributions to E. coli transcriptomes and evolutionary transcriptome changes in thermal adaptation. Here, we describe experimental details on how to prepare microarray samples that truly represent the growth fitness of the E. coli cells. A step-by-step record of sample preparation procedures that correspond to growing cells and transcriptome data sets that are deposited at the GEO database (GSE33212, GSE52770, GSE61739 are also provided for reference. Keywords: Transcriptome, Growth fitness, Escherichia coli, Microarray

EVALUATION REPORT SCIENCE APPLICATIONS INTERNATIONAL CORPORATION S-CAD CHEMICAL AGENT DETECTION SYSTEM

Science.gov (United States)

The USEPA's National Homeland Security Research Center (NHSRC)Technology Testing and Evaluation Program (TTEP) is carrying out performance tests on homeland security technologies. Under TTEP, Battelle recently evaluated the performance of the Science Applications International Co...

FITS: a function-fitting program

Energy Technology Data Exchange (ETDEWEB)

Balestrini, S.J.; Chezem, C.G.

1982-08-01

FITS is an iterating computer program that adjusts the parameters of a function to fit a set of data points according to the least squares criterion and then lists and plots the results. The function can be programmed or chosen from a library that is provided. The library can be expanded to include up to 99 functions. A general plotting routine, contained in the program but useful in its own right, is described separately in Appendix A. An example problem file and its solution is given in Appendix B.

Renewable energy policy evaluation using real option model. The case of Taiwan

International Nuclear Information System (INIS)

Lee, Shun-Chung; Shih, Li-Hsing

2010-01-01

This study presents a policy benefit evaluation model that integrates cost efficiency curve information on renewable power generation technologies into real options analysis (ROA) methods. The proposed model evaluates quantitatively the policy value provided by developing renewable energy (RE) in the face of uncertain fossil fuel prices and RE policy-related factors. The economic intuition underlying the policy-making process is elucidated, while empirical analysis illustrates the option value embedded in the current development policy in Taiwan for wind power. In addition to revealing the benefits that RE development provides when considering real options, analytical results indicate that ROA is a highly effective means of quantifying how policy planning uncertainty including managerial flexibility influences RE development. In addition to assessing the policy value of current RE development policy, this study also compares policy values in terms of internalized external costs and varying feed-in tariff (FIT). Simulation results demonstrate that the RE development policy with internalized CO 2 emission costs is appropriate policy planning from sustainability point of view. Furthermore, relationship between varying FIT and policy values can be shown quantitatively and appropriate FIT level could be determined accordingly. (author)

Strongwomen® Program Evaluation: Effect of Strength Training Exercises on Physical Fitness of Participants

Science.gov (United States)

Chaudhary, Anil Kumar; Van Horn, Beth; Corbin, Marilyn

2015-01-01

The Strongwomen® Program (SWP) is a nationally disseminated group strength-training exercise and nutrition education program delivered by Extension. The study reported here examined the effect of strength training exercises in SWP on improvement in physical fitness of program participants. Senior Fitness Test was used to collect data. Upon…

FITTING OF THE DATA FOR DIFFUSION COEFFICIENTS IN UNSATURATED POROUS MEDIA

Energy Technology Data Exchange (ETDEWEB)

B. Bullard

1999-05-01

The purpose of this calculation is to evaluate diffusion coefficients in unsaturated porous media for use in the TSPA-VA analyses. Using experimental data, regression techniques were used to curve fit the diffusion coefficient in unsaturated porous media as a function of volumetric water content. This calculation substantiates the model fit used in Total System Performance Assessment-1995 An Evaluation of the Potential Yucca Mountain Repository (TSPA-1995), Section 6.5.4.

FITTING OF THE DATA FOR DIFFUSION COEFFICIENTS IN UNSATURATED POROUS MEDIA

International Nuclear Information System (INIS)

B. Bullard

1999-01-01

The purpose of this calculation is to evaluate diffusion coefficients in unsaturated porous media for use in the TSPA-VA analyses. Using experimental data, regression techniques were used to curve fit the diffusion coefficient in unsaturated porous media as a function of volumetric water content. This calculation substantiates the model fit used in Total System Performance Assessment-1995 An Evaluation of the Potential Yucca Mountain Repository (TSPA-1995), Section 6.5.4

Normative functional fitness standards and trends of Portuguese older adults: cross-cultural comparisons.

Science.gov (United States)

Marques, Elisa A; Baptista, Fátima; Santos, Rute; Vale, Susana; Santos, Diana A; Silva, Analiza M; Mota, Jorge; Sardinha, Luís B

2014-01-01

This cross-sectional study was designed to develop normative functional fitness standards for the Portuguese older adults, to analyze age and gender patterns of decline, to compare the fitness level of Portuguese older adults with that of older adults in other countries, and to evaluate the fitness level of Portuguese older adults relative to recently published criterion fitness standards associated with maintaining physical independence. A sample of 4,712 independent-living older adults, age 65-103 yr, was evaluated using the Senior Fitness Test battery. Age-group normative fitness scores are reported for the 10th, 25th, 50th, 75th, and 90th percentiles. Results indicate that both women and men experience age-related losses in all components of functional fitness, with their rate of decline being greater than that observed in other populations, a trend which may cause Portuguese older adults to be at greater risk for loss of independence in later years. These newly established normative standards make it possible to assess individual fitness level and provide a basis for implementing population-wide health strategies to counteract early loss of independence.

Radiographic evaluation of cervical spine of subjects with temporomandibular joint internal disorder.

Science.gov (United States)

Munhoz, Wagner Cesar; Marques, Amélia Pasqual; Siqueira, José Tadeu Tesseroli de

2004-01-01

Although the etiopathophysiology of internal temporomandibular joint internal disorders (TMJ ID) is still unknown, it has been suggested that head and body posture could be related to its initial onset, development and perpetuation. The purpose of the present study was to observe the relationship between cervical spine X-ray abnormalities and TMJ ID. This investigation evaluated 30 subjects with internal TMJ disorder symptoms (test group) and 20 healthy subjects (control group). Subjects were submitted to clinical and radiographic evaluation. Clinical evaluation comprised anamnesis and stomatognathic system physical examination. Radiographic evaluation comprised analysis of lateral cervical spine X-rays by three physical therapists and tracing on the same images. The test group presented twice as much cervical spine hyperlordosis as the control group (20.7% versus 10.5%), but almost half of rectification prevalence (41.4 versus 79.0%, p = 0.03). After that, the test group was divided into three subgroups according to TMJ dysfunction severity, evaluated by Helkimo's index. These subgroups were not significantly different, but the subgroup with more severe TMD showed a tendency to cervical spine hyperlordosis prevalence. Results showed a tendency for subjects with more severe TMD to exhibit cervical spine hyperlordosis. Nevertheless, studies with a larger number of subjects suffering from severe TMD are encouraged in order to corroborate the present findings.

77 FR 18266 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Revised...

Science.gov (United States)

2012-03-27

... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731-TA-865-867 (Second Review)] Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Revised Schedule for the Subject Reviews AGENCY: United States International Trade Commission. ACTION: Notice. DATES: Effective Date: March...

Fitness-for-Work Assessment of Train Drivers of Yazd Railway, Central Iran

Directory of Open Access Journals (Sweden)

Z Loukzadeh

2013-07-01

Full Text Available Background: National Transport Commission (NTC classifies train driving as a high-level safety critical job. Objective: To assess fitness-for-work among train drivers in Yazd, central Iran. Methods: We evaluated 152 train drivers for their fitness for duty. The results were then compared with NTC guidelines. Results: 63.8% of subjects were fit for duty, 34.2% fit subject to review, and 2.0% were temporarily unfit. The most common reason for fit subject to review was a Kessler score >19. The prevalence of overweight and obesity was 48.0% and 15.0%, respectively. The prevalence of dyslipidemia was 69.7%, diabetes 10.0%, impaired fasting glucose 36.0%, and hypertension was 19.0%, respectively. Conclusion: Most studied train drivers can continue their work safely. The prevalence of some risk factors such as overweight and dyslipidemia were high among train drivers. This warrants further evaluation and establishment of control programs.

Prevalence of elevated mean arterial pressure and how fitness moderates its association with BMI in youth.

Science.gov (United States)

Ogunleye, Ayodele A; Sandercock, Gavin R; Voss, Christine; Eisenmann, Joey C; Reed, Katharine

2013-11-01

Cardiorespiratory fitness is known to be cardioprotective and its association with the components of the metabolic syndrome in children is becoming clearer. The aim of the present study was to examine the extent to which cardiorespiratory fitness may offset the weight-related association with mean arterial pressure (MAP) in schoolchildren. Cross-sectional study. Schoolchildren from the East of England, U.K. A total of 5983 (48% females) schoolchildren, 10 to 16 years of age, had height, weight and blood pressure measured by standard procedures and cardiorespiratory fitness assessed by the 20 m shuttle-run test. Participants were classified as fit or unfit using internationally accepted fitness cut-off points; and as normal weight, overweight or obese based on BMI, again using international cut-off points. Age-adjusted ANCOVA was used to determine the main effects and interaction of fitness and BMI on MAP Z-score. Logistic regression models were used to estimate odds ratios of elevated MAP. Prevalence of elevated MAP in schoolchildren was 14.8% overall and 35.7% in those who were obese-unfit. Approximately 21% of participants were overweight and 5% obese, while 23% were classified as unfit. MAP generally increased across BMI categories and was higher in the aerobically unfit participants. Obese-fit males had lower MAP compared with obese-unfit males (P < 0.001); this trend was similar in females (P = 0.05). Increasing fitness level may have a positive impact on the weight-related elevations of MAP seen in obese and overweight schoolchildren.

Can we predict final outcome of internal medicine residents with in-training evaluation.

Science.gov (United States)

Chierakul, Nitipatana; Pongprasobchai, Supot; Boonyapisit, Kanokwan; Chinthammitr, Yingyong; Pithukpakorn, Manop; Maneesai, Adisak; Srivijitkamol, Apiradee; Koomanachai, Pornpan; Koolvisoot, Ajchara; Tanwandee, Tawesak; Shayakul, Chairat; Kachintorn, Udom

2011-02-01

To assess the predictive value of in-training evaluation for determining future success in the internal medicine board certifying examination. Ninety-seven internal medicine residents from Faculty of Medicine Siriraj Hospital who undertake the Thai Board examination during the academic year 2006-2008 were enrolled. Correlation between the scores during internal medicine rotation and final scores in board examination were then examined. Significant positive linear correlation was found between scores from both written and clinical parts of board certifying examination and scores from the first-year summative written and clinical examinations and also the second-year formative written examination (r = 0.43-0.68, p evaluation by attending staffs was less well correlated (r = 0.29-0.36) and the evaluation by nurses or medical students demonstrated inverse relationship (r = -0.2, p = 0.27 and r = -0.13, p = 0.48). Some methods of in-training evaluation can predict successful outcome of board certifying examination. Multisource assessments cannot well extrapolate some aspects of professional competences and qualities.

Improving the fitness and physical activity levels of primary school children: results of the Fit-4-Fun group randomized controlled trial.

Science.gov (United States)

Eather, Narelle; Morgan, Philip J; Lubans, David R

2013-01-01

To evaluate the impact of a multi-component school-based physical activity intervention (Fit-4-Fun) on health-related fitness and objectively measured physical activity in primary school children. Four Hunter primary schools were recruited in April, 2011 and randomized by school into treatment or control conditions. Participants included 213 children (mean age = 10.72 years ± 0.6; 52.2% female) with the treatment group (n = 118) completing the 8-week Fit-4-Fun Program. Participants were assessed at baseline and 6-month follow-up, with a 91% retention rate. Cardio-respiratory fitness (CRF) (20 m shuttle run) was the primary outcome, and secondary outcomes included body composition (BMI, BMI(Z)), muscular fitness (7-stage sit-up test, push-up test, basketball throw test, Standing Jump), flexibility (sit and reach) and physical activity (7 days pedometry). After 6-months, significant treatment effects were found for CRF (adjusted mean difference, 1.14 levels, p < 0.001), body composition (BMI mean, -0.96 kg/m(2), p < 0.001 and BMI z-score mean -0.47 z-scores, p < 0.001), flexibility (sit and reach mean, 1.52 cm, p = 0.0013), muscular fitness (sit-ups) (mean 0.62 stages, p = 0.003) and physical activity (mean, 3253 steps/day, p < 0.001). There were no group by time effects for the other muscular fitness measures. A primary school-based intervention focusing on fitness education significantly improved health-related fitness and physical activity levels in children. Copyright © 2012 Elsevier Inc. All rights reserved.

Self-perceived physical fitness and physical activity demand in the ...

African Journals Online (AJOL)

The importance of establishing how the elderly subjectively perceive their physical fitness has been studied so that future action plans may be established to improve their quality of life. The main goal of this research was to evaluate how Spanish people aged 65 years and over, perceive their level of physical fitness and the ...

The Association Between Self-Rated Fitness and Cardiorespiratory Fitness in Adults

DEFF Research Database (Denmark)

Jensen, Karina Gregersen; Rosthøj, Susanne; Linneberg, Allan

2018-01-01

To assess criterion validity of a single item question on self-rated physical fitness against objectively measured cardiorespiratory fitness. From the Health2008 study 749 men and women between 30 and 60 years of age rated their fitness as excellent, very good, good, fair or poor. Cardiorespiratory...... fitness was estimated with the watt-max test. Agreement between self-rated and objectively measured physical fitness was assessed by Cohen's weighted kappa coefficient. Correlation was determined by Goodman & Kruskal's gamma correlation coefficient. All analyses were stratified according to gender. Data...... from 323 men and 426 women were analysed. There was a slight agreement between self-rated and objectively measured fitness in men (weighted kappa: 0.18, [95%CI: 0.13;0.23]) and a fair agreement in women (weighted kappa: 0.27, [95%CI: 0.22;0.32]). In both genders, self-rated fitness was positively...

The hitchhiker's guide to altruism: gene-culture coevolution, and the internalization of norms.

Science.gov (United States)

Gintis, Herbert

2003-02-21

An internal norm is a pattern of behavior enforced in part by internal sanctions, such as shame, guilt and loss of self-esteem, as opposed to purely external sanctions, such as material rewards and punishment. The ability to internalize norms is widespread among humans, although in some so-called "sociopaths", this capacity is diminished or lacking. Suppose there is one genetic locus that controls the capacity to internalize norms. This model shows that if an internal norm is fitness enhancing, then for plausible patterns of socialization, the allele for internalization of norms is evolutionarily stable. This framework can be used to model Herbert Simon's (1990) explanation of altruism, showing that altruistic norms can "hitchhike" on the general tendency of internal norms to be personally fitness-enhancing. A multi-level selection, gene-culture coevolution argument then explains why individually fitness-reducing internal norms are likely to be prosocial as opposed to socially harmful.

FTO polymorphism, cardiorespiratory fitness, and obesity in Brazilian youth.

Science.gov (United States)

Reuter, Cézane Priscila; Rosane De Moura Valim, Andréia; Gaya, Anelise Reis; Borges, Tássia Silvana; Klinger, Elisa Inês; Possuelo, Lia Gonçalves; Franke, Silvia Isabel Rech; Kmetzsch, Lívia; Vainstein, Marilene Henning; Prá, Daniel; Burgos, Miria Suzana

2016-05-01

The aim of the present study was to evaluate the relationship between the rs9939609 fat mass and obesity-associated (FTO) polymorphism and cardiorespiratory fitness (CRF) with overweight/obesity outcomes in youth. This study included 420 youths, comprising 211 boys and 209 girls aged 7-17. Overweight/obesity were evaluated by body mass index (BMI), waist circumference (WC), and the percentage of fat (PF) according to two skinfold thickness measurements. Genotyping of the rs9939609 polymorphism was conducted using real-time Polymerase Chain Reaction (PCR) utilizing TaqMan(®) probes, and CRF was evaluated through a 9-minute run/walk test, categorized as fit or unfit. Logistic regression was utilized to evaluate a possible association between the polymorphism and CRF, with three obesity indicators evaluated. Individuals with the genotype risk (AA) of FTO polymorphism rs9939609 showed higher prevalence of overweight/obesity, as evaluated by BMI (OR: 3.21; CI: 1.71-6.05), WC (OR: 2.59; CI: 1.35-4.97), and PF (OR: 2.59; CI: 1.36-4.92). Additionally, students with the AA genotype in the unfit model had a significant odds ratio for obesity (OR: 4.40; CI: 1.83-10.61 for BMI; OR: 3.54; CI: 1.58-7.96 for WC), whereas we did not observe associations between the AA genotype with BMI and WC using the fit model. Conversely, PF was associated with the AA genotype only in the fit model (OR: 3.24; CI: 1.26-8.34). This study demonstrated that the rs9939609 (FTO) polymorphism showed a relationship with obesity in the population studied and an interaction with CRF. Students with low levels of CRF and the AA genotype have a higher risk of being overweight/obese. This association was not found in students with higher levels of CRF. Am. J. Hum. Biol. 28:381-386, 2016. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

FItness programy a individuální přístup ve fitness

OpenAIRE

Rambous, Milan

2008-01-01

Souhrn: Tato diplomová práce se zabývá problematikou fitness programů a individuálru'ho přístupu ve fitness centrech. Celé téma zahrnuje rozpracování postupu při vytváření fitness programů a roli osobního trenéra ve fitness. Dále jsou zde uvedeny specifika některých fitness programů a v empirické části pak příklad dvou individuálních fitness programů. Název práce: Fitness programy a individuálnípřístup ve fitness Title: FITNESS PROGRAMS AND INDIVIDUAL CARE IN FITNESS Cíle práce: 1. podrobný p...

Shoulder Injuries in Individuals Who Participate in CrossFit Training.

Science.gov (United States)

Summitt, Ryan J; Cotton, Ryan A; Kays, Adam C; Slaven, Emily J

CrossFit, a sport and fitness program, has become increasingly popular both nationally and internationally. Researchers have recently identified significant improvements in health and wellness due to CrossFit. However, some individuals assert that CrossFit poses an inherent risk of injury, specifically to the shoulder, due to the intensity of training. Currently, there is limited evidence to support this assertion. Exercises performed during CrossFit do not place the shoulder at greater risk for injury. Injury rates are comparable to other sports of similar intensity. Descriptive survey study. Level 5. An electronic survey was developed and dispersed to approximately 980 individuals who trained in CrossFit gyms. The survey identified demographic data, training characteristics, and the prevalence of injury over a 6-month period in individuals who participated in CrossFit training. A total of 187 (19.1%) individuals completed the survey. Forty-four (23.5%) indicated that they had experienced a shoulder injury during CrossFit training over the previous 6 months. Of those who reported injury, 17 (38.6%) stated that this injury was an exacerbation of a previous injury sustained prior to starting CrossFit. There was no significant relationship between several demographic and training variables and shoulder injury. All shoulder injuries occurred at a rate of 1.94 per 1000 hours training, while "new" shoulder injuries occurred at a rate of 1.18 per 1000 hours training. The most commonly attributed causes of injury were improper form (33.3%) and exacerbation of a previous injury (33.3%). Twenty-five (64.1%) of those who experienced injury reported 1 month or less of training reduction due to the injury. Shoulder injury rates during CrossFit training are comparable to other methods of recreational exercise. Clinicians should be aware of training demands of exercises in CrossFit and modifications for these exercises to safely progress their patients back to participation.

Proceedings: 19th International Nondestructive Testing and Evaluation of Wood Symposium

Science.gov (United States)

Robert J. Ross; Raquel Gonçalves; Xiping Wang

2015-01-01

The 19th International Nondestructive Testing and Evaluation of Wood Symposium was hosted by the University of Campinas, College of Agricultural Engineering (FEAGRI/UNICAMP), and the Brazilian Association of Nondestructive Testing and Evaluation (ABENDI) in Rio de Janeiro, Brazil, on September 22–25, 2015. This Symposium was a forum for those involved in nondestructive...

17 CFR 240.17Ad-13 - Annual study and evaluation of internal accounting control.

Science.gov (United States)

2010-04-01

... internal accounting control. 240.17Ad-13 Section 240.17Ad-13 Commodity and Securities Exchanges SECURITIES... Company Rules § 240.17Ad-13 Annual study and evaluation of internal accounting control. (a) Accountant's... accountant concerning the transfer agent's system of internal accounting control and related procedures for...

Rational drug use--evaluation of a training programme for interns.

Science.gov (United States)

Natu, M V; Zachariah, P; Zachariah, A; Chand, S; Singh, T; Choudhry, K

1995-09-01

A workshop covering various aspects of rational drug use was conducted for interns of Christian Medical College, Ludhiana. Evaluation of the workshop revealed that it was able to bring about an attitudinal change regarding rational drug use. The methodology and evaluation procedures have been described. It is suggested that similar attempts should be made at all medical colleges so that every graduate enters medical practice with a positive attitude towards rational drug use.

Design and interpretation of anthropometric and fitness testing of basketball players.

Science.gov (United States)

Drinkwater, Eric J; Pyne, David B; McKenna, Michael J

2008-01-01

The volume of literature on fitness testing in court sports such as basketball is considerably less than for field sports or individual sports such as running and cycling. Team sport performance is dependent upon a diverse range of qualities including size, fitness, sport-specific skills, team tactics, and psychological attributes. The game of basketball has evolved to have a high priority on body size and physical fitness by coaches and players. A player's size has a large influence on the position in the team, while the high-intensity, intermittent nature of the physical demands requires players to have a high level of fitness. Basketball coaches and sport scientists often use a battery of sport-specific physical tests to evaluate body size and composition, and aerobic fitness and power. This testing may be used to track changes within athletes over time to evaluate the effectiveness of training programmes or screen players for selection. Sports science research is establishing typical (or 'reference') values for both within-athlete changes and between-athlete differences. Newer statistical approaches such as magnitude-based inferences have emerged that are providing more meaningful interpretation of fitness testing results in the field for coaches and athletes. Careful selection and implementation of tests, and more pertinent interpretation of data, will enhance the value of fitness testing in high-level basketball programmes. This article presents reference values of fitness and body size in basketball players, and identifies practical methods of interpreting changes within players and differences between players beyond the null-hypothesis.

Computer code FIT

International Nuclear Information System (INIS)

Rohmann, D.; Koehler, T.

1987-02-01

This is a description of the computer code FIT, written in FORTRAN-77 for a PDP 11/34. FIT is an interactive program to decude position, width and intensity of lines of X-ray spectra (max. length of 4K channels). The lines (max. 30 lines per fit) may have Gauss- or Voigt-profile, as well as exponential tails. Spectrum and fit can be displayed on a Tektronix terminal. (orig.) [de

International Reactor Physics Experiment Evaluation (IRPhE) Project. IRPhE Handbook - 2015 edition

International Nuclear Information System (INIS)

Bess, John D.; Gullifor, Jim

2015-03-01

The purpose of the International Reactor Physics Experiment Evaluation (IRPhE) Project is to provide an extensively peer-reviewed set of reactor physics-related integral data that can be used by reactor designers and safety analysts to validate the analytical tools used to design next-generation reactors and establish the safety basis for operation of these reactors. This work of the IRPhE Project is formally documented in the 'International Handbook of Evaluated Reactor Physics Benchmark Experiments', a single source of verified and extensively peer-reviewed reactor physics benchmark measurements data. The evaluation process entails the following steps: Identify a comprehensive set of reactor physics experimental measurements data, Evaluate the data and quantify overall uncertainties through various types of sensitivity analysis to the extent possible, verify the data by reviewing original and subsequently revised documentation, and by talking with the experimenters or individuals who are familiar with the experimental facility, Compile the data into a standardized format, Perform calculations of each experiment with standard reactor physics codes where it would add information, Formally document the work into a single source of verified and peer reviewed reactor physics benchmark measurements data. The International Handbook of Evaluated Reactor Physics Benchmark Experiments contains reactor physics benchmark specifications that have been derived from experiments that were performed at nuclear facilities around the world. The benchmark specifications are intended for use by reactor designers, safety analysts and nuclear data evaluators to validate calculation techniques and data. Example calculations are presented; these do not constitute a validation or endorsement of the codes or cross-section data. The 2015 edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments contains data from 143 experimental series that were

Policy evaluation and democracy: Do they fit?

Science.gov (United States)

Sager, Fritz

2017-08-05

The papers assembled in this special issue shed light on the question of the interrelation between democracy and policy evaluation by discussing research on the use of evaluations in democratic processes. The collection makes a case for a stronger presence of evaluation in democracy beyond expert utilization. Parliamentarians prove to be more aquainted with evaluations than expected and the inclusion of evaluations in policy arguments increases the deliberative quality of democratic campaigns. In sum, evaluation and democracy turn out to be well compatible after all. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evaluation of body posture in individuals with internal temporomandibular joint derangement.

Science.gov (United States)

Munhoz, Wagner Cesar; Marques, Amélia Pasqual; de Siqueira, José Tadeu Tesseroli

2005-10-01

Temporomandibular dysfunctions (TMD) comprise a great number of disruptions that may affect the temporomandibular joint (TMJ), the masticatory muscles, or both. TMJ internal derangement is a specific type of TMD, of which the etiology and physiopathology are broadly unknown, but have been suggested to be linked to head, neck, and body posture factors. This study aimed at verifying possible relationships between body posture and TMJ internal derangements (TMJ-id), by comparing 30 subjects presenting typical TMJ-id signs to 20 healthy subjects. Subjects' clinical evaluations included anamnesis, stomatognatic system evaluation, and plotting analysis on body posture photographs. No statistically significant differences were found between the groups. Results do not support the assertion that body posture plays a role in causing or enhancing TMD; however, these results should be cautiously considered because of the small number of subjects evaluated and the many posture variables submitted to statistical procedures that lead to high standard deviations.

Treatment of photon radiation in kinematics fits at future e+e- colliders

International Nuclear Information System (INIS)

Beckmann, M.; List, J.; List, B.

2010-05-01

Kinematic fitting, where constraints such as energy and momentum conservation are imposed on measured four-vectors of jets and leptons, is an important tool to improve the resolution in high-energy physics experiments. At future e + e - colliders, photon radiation parallel to the beam carrying away large amounts of energy and momentum will become a challenge for kinematic fitting. A photon with longitudinal momentum p z,γ (η) is introduced, which is parametrized such that η follows a normal distribution. In the fit, η is treated as having a measured value of zero, which corresponds to p z,γ , = 0. As a result, fits with constraints on energy and momentum conservation converge well even in the presence of a highly energetic photon, while the resolution of fits without such a photon is retained. A fully simulated and reconstructed e + e - →q anti qq anti q event sample at √(s)=500 GeV is used to investigate the performance of this method under realistic conditions, as expected at the International Linear Collider. (orig.)

An R package for fitting age, period and cohort models

Directory of Open Access Journals (Sweden)

Adriano Decarli

2014-11-01

Full Text Available In this paper we present the R implementation of a GLIM macro which fits age-period-cohort model following Osmond and Gardner. In addition to the estimates of the corresponding model, owing to the programming capability of R as an object oriented language, methods for printing, plotting and summarizing the results are provided. Furthermore, the researcher has fully access to the output of the main function (apc which returns all the models fitted within the function. It is so possible to critically evaluate the goodness of fit of the resulting model.

Franchising v oboru fitness pro ženy

OpenAIRE

Horáčková, Simona

2012-01-01

The aim of my bachelor's thesis are analysing and comparing of two franchises in fitness for women in the Czech Republic. Common franchise terms, definitions of franchising and advantages, disadvantages for franchisee and usual methods - take place in business plans in the theoretical part. The application part contains the following analyses: analysis of competition, target market, marketing mix, SWOT analysis and a five year financial plan. In the application part, Net Present Value, Intern...

Coordinated activities on evaluation of collisional data for fusion applications

International Nuclear Information System (INIS)

Chung, H.-K.; Braams, B. J.

2013-01-01

It is the role of the Atomic and Molecular Data Unit of the International Atomic Energy Agency to review progress in the production, compilation and evaluation of atomic, molecular and plasma-surface interaction (AM/PSI) data for the fusion program and to support the development of internationally recommended libraries of AM/PSI data for fusion. In response to increasing requests from the fusion community the Unit has increased its effort to promote the assessment of data quality by organizing a series of meetings on the relevant issues: 1) Error propagation and sensitivity analysis, 2) Current status of evaluated databases, 3) Uncertainty estimates of theoretical data, 4) Experimental data evaluation, 5) Data evaluation methods and semi-empirical fits and 6) Establishment of an evaluators’ network. The discussions and conclusions are summarized here

Test and intercomparisons of data fitting with general least squares code GMA versus Bayesian code GLUCS

International Nuclear Information System (INIS)

Pronyaev, V.G.

2003-01-01

Data fitting with GMA and GLUCS gives consistent results. Difference in the evaluated central values obtained with different formalisms can be related to the general accuracy with which fits could be done in different formalisms. It has stochastic nature and should be accounted in the final results of the data evaluation as small SERC uncertainty. Some shift in central values of data evaluated with GLUCS and GMA relative the central values evaluated with the R-matrix model code RAC is observed for cases of fitting strongly varying data and is related to the PPP. The procedure of evaluation, free from PPP, should be elaborated. (author)

Internal education quality evaluation as a factor of development of engineering education quality in Russia

OpenAIRE

Shvindt Antoniy; Nikanorov Ivan

2017-01-01

In the paper, general approaches to evaluation of quality of engineering education in Russia, stated by expert community, are considered. The authors arrived at the conclusion that attention to internal evaluation mechanism of the education quality in Russian normative framework of higher education system is insufficient, as compared to European higher education practices. A pattern of involving the students in the internal evaluation of higher education quality is submitted to be a tool to d...

An NCME Instructional Module on Item-Fit Statistics for Item Response Theory Models

Science.gov (United States)

Ames, Allison J.; Penfield, Randall D.

2015-01-01

Drawing valid inferences from item response theory (IRT) models is contingent upon a good fit of the data to the model. Violations of model-data fit have numerous consequences, limiting the usefulness and applicability of the model. This instructional module provides an overview of methods used for evaluating the fit of IRT models. Upon completing…

Cardiorespiratory fitness and muscle strength in pancreatic cancer patients.

Science.gov (United States)

Clauss, Dorothea; Tjaden, Christine; Hackert, Thilo; Schneider, Lutz; Ulrich, Cornelia M; Wiskemann, Joachim; Steindorf, Karen

2017-09-01

Cancer patients frequently experience reduced physical fitness due to the disease itself as well as treatment-related side effects. However, studies on physical fitness in pancreatic cancer patients are missing. Therefore, we assessed cardiorespiratory fitness and muscle strength of pancreatic cancer patients. We included 65 pancreatic cancer patients, mostly after surgical resection. Cardiorespiratory fitness was assessed using cardiopulmonary exercise testing (CPET) and 6-min walk test (6MWT). Hand-held dynamometry was used to evaluate isometric muscle strength. Physical fitness values were compared to reference values of a healthy population. Associations between sociodemographic and clinical variables with patients' physical fitness were analyzed using multiple regression models. Cardiorespiratory fitness (VO 2 peak, 20.5 ± 6.9 ml/min/kg) was significantly lower (-24%) compared to healthy reference values. In the 6MWT pancreatic cancer patients nearly reached predicted values (555 vs. 562 m). Maximal voluntary isometric contraction (MVIC) of the upper (-4.3%) and lower extremities (-13.8%) were significantly lower compared to reference values. Overall differences were larger in men than those in women. Participating in regular exercise in the year before diagnosis was associated with greater VO 2 peak (p fitness with regard to both cardiorespiratory function and isometric muscle strength, already in the early treatment phase (median 95 days after surgical resection). Our findings underline the need to investigate exercise training in pancreatic cancer patients to counteract the loss of physical fitness.

Evidence of the Adoption and Implementation of a Statewide Childhood Obesity Prevention Initiative in the New York State WIC Program: The "NY Fit WIC" Process Evaluation

Science.gov (United States)

Sekhobo, Jackson P.; Egglefield, Katherine; Edmunds, Lynn S.; Shackman, Gene

2012-01-01

Process evaluations are critical in determining whether outcome evaluations are warranted. This study assessed the extent to which a childhood obesity prevention initiative, "NY Fit WIC", was adopted and implemented by the New York State Supplemental Nutrition Program for Women, Infants and Children (WIC). Process data came from…

Evaluation of marginal/internal fit of chrome‑cobalt crowns: Direct ...

African Journals Online (AJOL)

2014-11-03

Nov 3, 2014 ... computer‑aided design and computer‑aided manufacturing. Niger J Clin ... All of these reasons, manufacturers increasingly are choosing these ... fabricated using these different production techniques with. 32 specimens in ...

An Epidemiological Profile of CrossFit Athletes in Brazil.

Science.gov (United States)

Sprey, Jan W C; Ferreira, Thiago; de Lima, Marcos V; Duarte, Aires; Jorge, Pedro B; Santili, Claudio

2016-08-01

CrossFit is a conditioning and training program that has been gaining recognition and interest among the physically active population. Approximately 440 certified and registered CrossFit fitness centers and gyms exist in Brazil, with approximately 40,000 athletes. To date, there have been no epidemiological studies about the CrossFit athlete in Brazil. To evaluate the profile, sports history, training routine, and presence of injuries among athletes of CrossFit. Descriptive epidemiological study. This cross-sectional study was based on a questionnaire administered to CrossFit athletes from various specialized fitness centers in Brazil. Data were collected from May 2015 to July 2015 through an electronic questionnaire that included demographic data, level of sedentary lifestyle at work, sports training history prior to starting CrossFit, current sports activities, professional monitoring, and whether the participants experienced any injuries while practicing CrossFit. A total of 622 questionnaires were received, including 566 (243 women [42.9%] and 323 men [57.1%]) that were completely filled out and met the inclusion criteria and 9% that were incompletely filled out. Overall, 176 individuals (31.0%) mentioned having experienced some type of injury while practicing CrossFit. We found no significant difference in injury incidence rates regarding demographic data. There was no significant difference regarding previous sports activities because individuals who did not practice prior physical activity showed very similar injury rates to those who practiced at any level. CrossFit injury rates are comparable to those of other recreational or competitive sports, and the injuries show a profile similar to weight lifting, power lifting, weight training, Olympic gymnastics, and running, which have an injury incidence rate nearly half that of soccer.

International evaluation of the programme on fluid bed combustion and gasification

Energy Technology Data Exchange (ETDEWEB)

Kremer, H. [Ruhr Univ., Bochum (Germany); Magnusson, B.F. [Norwegian Univ. of Science and Technology, Trondheim (Norway); Reed, T. [Colorado School of Mines (United States)

1996-12-31

This report on the Swedish National Program on Fluid Bed Combustion and Gasification is part of the on-going evaluation process adopted by the funding organization NUTEK. This agency has invited the undersigned to act as members of an international panel responsible for evaluating the progress made in 9 projects initiated between 1993-1996. The output of this evaluation procedure is given in this report. The main aim of the Fluid Bed Combustion and Gasification Program is to develop industrially relevant knowledge and competence in experimental and computational techniques capable of characterizing the flow, heat transfer, combustion, gasification, ash formation and deposition and emissions in fluid bed gasifiers and combustors. To achieve this aim NUTEK is sponsoring research in a number of universities and encourages close cooperation between universities and industry. In the evaluation of the various sponsored research programs, the evaluation committee has considered the following key points: relevance of research to industrial needs; originality of research; program management; adequacy of resources; degree of collaboration between industry and academia; international standing of research. In this report comments and recommendations are made on individual projects as well as on the programme in general and they express the unanimous view of the panel members

International evaluation of the programme on fluid bed combustion and gasification

Energy Technology Data Exchange (ETDEWEB)

Kremer, H [Ruhr Univ., Bochum (Germany); Magnusson, B F [Norwegian Univ. of Science and Technology, Trondheim (Norway); Reed, T [Colorado School of Mines (United States)

1997-12-31

This report on the Swedish National Program on Fluid Bed Combustion and Gasification is part of the on-going evaluation process adopted by the funding organization NUTEK. This agency has invited the undersigned to act as members of an international panel responsible for evaluating the progress made in 9 projects initiated between 1993-1996. The output of this evaluation procedure is given in this report. The main aim of the Fluid Bed Combustion and Gasification Program is to develop industrially relevant knowledge and competence in experimental and computational techniques capable of characterizing the flow, heat transfer, combustion, gasification, ash formation and deposition and emissions in fluid bed gasifiers and combustors. To achieve this aim NUTEK is sponsoring research in a number of universities and encourages close cooperation between universities and industry. In the evaluation of the various sponsored research programs, the evaluation committee has considered the following key points: relevance of research to industrial needs; originality of research; program management; adequacy of resources; degree of collaboration between industry and academia; international standing of research. In this report comments and recommendations are made on individual projects as well as on the programme in general and they express the unanimous view of the panel members

Relationship between functional fitness, medication costs and mood in elderly people

Directory of Open Access Journals (Sweden)

Michelli Luciana Massolini Laureano

2014-06-01

Full Text Available Objective: to verify if functional fitness (FF is associated with the annual cost of medication consumption and mood states (MSt in elderly people. Methods: a cross-sectional study with 229 elderly people aged 65 years or more at Santa Casa de Misericórdia de Coimbra, Portugal. Seniors with physical and psychological limitations were excluded, as well as those using medication that limits performance on the tests. The Senior Fitness Test was used to evaluate FF, and the Profile of Mood States - Short Form to evaluate the MSt. The statistical analysis was based on Mancova, with adjustment for age, for comparison between men and women, and adjustment for sex, for comparison between cardiorespiratory fitness quintiles. The association between the variables under study was made with partial correlation, controlling for the effects of age, sex and body mass index. Results: an inverse correlation between cardiorespiratory fitness and the annual cost of medication consumption was found (p < 0.01. FF is also inversely associated with MSt (p < 0.05. Comparisons between cardiorespiratory fitness quintiles showed higher medication consumption costs in seniors with lower aerobic endurance, as well as higher deterioration in MSt (p < 0.01. Conclusion: elderly people with better FF and, specifically, better cardiorespiratory fitness present lower medication consumption costs and a more positive MSt.

International Nuclear Fuel Cycle Evaluation

International Nuclear Information System (INIS)

Carnesale, A.

1980-01-01

As nuclear power expands globally, so too expands the capability for producing nuclear weapons. The International Nuclear Fuel Cycle Evaluation (INFCE) was organized in 1977 for the purpose of exploring two areas: (1) ways in which nuclear energy can be made available to help meet world energy needs, and (2) means by which the attendant risk of weapons proliferation can be held to a minimum. INFCE is designed for technical and analytical study rather than negotiation. Its organizational structure and issues under consideration are discussed. Some even broader issues that emerge from consideration of the relationships between the peaceful and military use of nuclear energy are also discussed. These are different notions of the meaning of nuclear proliferation, nuclear export policy, the need of a nuclear policy to be both a domestic as well as a foreign one, and political-military measures that can help reduce incentives of countries to acquire nuclear weapons of their own

Evaluation of CANDU NPP containment structure subjected to aging and internal pressure increase

Energy Technology Data Exchange (ETDEWEB)

Huang, Xu [Department of Civil Engineering, University of Toronto, Toronto M5S 1A4 (Canada); Kwon, Oh-Sung, E-mail: os.kwon@utoronto.ca [Department of Civil Engineering, University of Toronto, Toronto M5S 1A4 (Canada); Bentz, Evan [Department of Civil Engineering, University of Toronto, Toronto M5S 1A4 (Canada); Tcherner, Julia [Candu Energy Inc. a member of SNC-Lavalin Group, Mississauga L5K 1B1 (Canada)

2017-04-01

Highlights: • The aging effects on the performance of a nuclear containment structure is evaluated. • A numerical model of the structure is subjected to increasing internal pressure. • No through-thickness cracks are predicted under the design level internal pressure. • The structure is predicted to be ductile up to large internal pressure levels. - Abstract: The objective of this study is to investigate the long-term performance of a typical CANDU® containment structure. A three-dimensional nonlinear finite element model was built to realistically evaluate the performance of the structure under service load as well as a hypothetical beyond-design level internal pressure. Consideration is given to the time-dependent effects, such as shrinkage, creep, and relaxation of prestressing tendons, over a 60-year timeframe. In addition, the sensitivity of the response of the containment structure against support condition, internal temperature profile and temporary construction openings was also investigated. The accuracy of the numerical model was validated against structural measurements made during a routine leak rate test. The analysis results show that the containment structure would develop a ductile mechanism if the internal pressure significantly exceeded the design pressure. The pressure-deformation relationship of the structure is sensitive to the considered time-dependent parameters.

Adding thin-ideal internalization and impulsiveness to the cognitive-behavioral model of bulimic symptoms.

Science.gov (United States)

Schnitzler, Caroline E; von Ranson, Kristin M; Wallace, Laurel M

2012-08-01

This study evaluated the cognitive-behavioral (CB) model of bulimia nervosa and an extension that included two additional maintaining factors - thin-ideal internalization and impulsiveness - in 327 undergraduate women. Participants completed measures of demographics, self-esteem, concern about shape and weight, dieting, bulimic symptoms, thin-ideal internalization, and impulsiveness. Both the original CB model and the extended model provided good fits to the data. Although structural equation modeling analyses suggested that the original CB model was most parsimonious, hierarchical regression analyses indicated that the additional variables accounted for significantly more variance. Additional analyses showed that the model fit could be improved by adding a path from concern about shape and weight, and deleting the path from dieting, to bulimic symptoms. Expanding upon the factors considered in the model may better capture the scope of variables maintaining bulimic symptoms in young women with a range of severity of bulimic symptoms. Copyright © 2012 Elsevier Ltd. All rights reserved.

There is no fitness but fitness, and the lineage is its bearer

Science.gov (United States)

2016-01-01

Inclusive fitness has been the cornerstone of social evolution theory for more than a half-century and has matured as a mathematical theory in the past 20 years. Yet surprisingly for a theory so central to an entire field, some of its connections to evolutionary theory more broadly remain contentious or underappreciated. In this paper, we aim to emphasize the connection between inclusive fitness and modern evolutionary theory through the following fact: inclusive fitness is simply classical Darwinian fitness, averaged over social, environmental and demographic states that members of a gene lineage experience. Therefore, inclusive fitness is neither a generalization of classical fitness, nor does it belong exclusively to the individual. Rather, the lineage perspective emphasizes that evolutionary success is determined by the effect of selection on all biological and environmental contexts that a lineage may experience. We argue that this understanding of inclusive fitness based on gene lineages provides the most illuminating and accurate picture and avoids pitfalls in interpretation and empirical applications of inclusive fitness theory. PMID:26729925

There is no fitness but fitness, and the lineage is its bearer.

Science.gov (United States)

Akçay, Erol; Van Cleve, Jeremy

2016-02-05

Inclusive fitness has been the cornerstone of social evolution theory for more than a half-century and has matured as a mathematical theory in the past 20 years. Yet surprisingly for a theory so central to an entire field, some of its connections to evolutionary theory more broadly remain contentious or underappreciated. In this paper, we aim to emphasize the connection between inclusive fitness and modern evolutionary theory through the following fact: inclusive fitness is simply classical Darwinian fitness, averaged over social, environmental and demographic states that members of a gene lineage experience. Therefore, inclusive fitness is neither a generalization of classical fitness, nor does it belong exclusively to the individual. Rather, the lineage perspective emphasizes that evolutionary success is determined by the effect of selection on all biological and environmental contexts that a lineage may experience. We argue that this understanding of inclusive fitness based on gene lineages provides the most illuminating and accurate picture and avoids pitfalls in interpretation and empirical applications of inclusive fitness theory. © 2016 The Author(s).

Evaluation of marginal fit of single implant-supported metal-ceramic crowns prepared by using presintered metal blocks.

Science.gov (United States)

Pasali, Baris; Sarac, Duygu; Kaleli, Necati; Sarac, Yakup Sinasi

2018-02-01

Recently, presintered metal blocks for nonprecious and precious metal implant-supported restorations have gained popularity in computer-aided design and computer-aided manufacturing (CAD-CAM) systems. However, few studies have evaluated the marginal discrepancy of implant-supported restorations made with these new alloy systems. The purpose of this in vitro study was to compare the milling-sintering method with the lost-wax and milling methods in terms of the marginal fit of implant-supported metal-ceramic restorations. Thirty implant abutments screwed to implant analogs were embedded into acrylic resin to investigate marginal fit and then divided according to fabrication methods into the following 3 groups (n=10): lost-wax (LW; control group), milling (M), and milling-sintering (MS). Porcelain material was applied to all specimens after completion of the fabrication process. Subsequently, all specimens were cemented to implant abutments for the measurement of marginal discrepancies. Twelve marginal discrepancy measurements were recorded on each implant abutment by using a stereomicroscope. The arithmetic mean of these 12 measurements was considered the mean marginal discrepancy value of each abutment. Data were statistically analyzed by using 1-way ANOVA and Tukey honest significant difference tests (α=.05). The lowest mean marginal discrepancy values (81 ±2 μm) were observed in the M group, which was significantly different (Pmarginal discrepancy values (99 ±2 μm) were observed in the MS group. The results revealed that restorations prepared by the milling-sintering method provided clinically acceptable results (marginal fit. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

[Physical fitness evolution in octogenarian population and its relationship with a sedentary lifestyle].

Science.gov (United States)

Muñoz-Arribas, Alberto; Vila-Maldonado, Sara; Pedrero-Chamizo, Raquel; Espino, Luis; Gusi, Narcis; Villa, Gerardo; Gonzalez-Gross, Marcela; Casajús, José Antonio; Ara, Ignacio; Gómez-Cabello, Alba

2014-04-01

The aim of this study was to determine the changes in physical fitness over two years of following up in octogenarian people and to check whether a sedentary lifestyle modify these variations. Physical fitness of 182 subject (48 men, 134 women) with a mean age of 82,3 ± 2,3 years were evaluated using 8 different tests. A repeated measures analysis was carried out to see the differences between the two evaluation periods and to see the physical fitness differences between sedentary people (sit ≥ 4 hours/day) and non sedentary people (sit < 4 hours/day). Between the two evaluation periods, we found a significant decrease in the agility test (p < 0.05), walking speed (p < 0.01) and endurance (p < 0.01). In relation to the subjects who spent sitting 4 hours/day there was a decrease in the walking speed test between the two evaluations (p < 0.05). Moreover, there was a decrease of walking speed and endurance between the two evaluation periods in both sedentary and nonsedentary people (p < 0.05). In two years of following up, there are adverse changes in the level of physical fitness in octogenarians. Long periods of sitting time may translate into a loss of agility. Walking speed and endurance seem to be the components of physical fitness more affected by the ageing process in this population; and this loss is not determined by the hours of sitting per day. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Mapping the perceptual structure of rectangles through goodness-of-fit ratings.

Science.gov (United States)

Palmer, Stephen E; Guidi, Stefano

2011-01-01

Three experiments were carried out to investigate the internal structure of a rectangular frame to test Arnheim's (1974 Art and Visual Perception, 1988 The Power of the Center) proposals about its 'structural skeleton'. Observers made subjective ratings of how well a small probe circle fit within a rectangle at different interior positions. In experiment 1, ratings of 77 locations were highest in the center, decreased with distance from the center, greatly elevated along vertical and horizontal symmetry axes, and somewhat elevated along the local symmetry axes. A linear regression model with six symmetry-related factors accounted for 95% of the variance. In experiment 2 we measured perceived fit along local symmetry axes versus global diagonals near the corners to determine which factor was relevant. 2AFC probabilities were elevated only along the local symmetry axes and were higher when the probe was closer to the vertex. In experiment 3 we examined the effect of dividing a rectangular frame into two rectangular 'subframes' using an additional line. The results show that the primary determinant of good fit is the position of the target circle within the local subframes. In general, the results are consistent with Arnheim's proposals about the internal structure of a rectangular frame, but an alternative interpretation is offered in terms of the Gestalt concept of figural goodness.

Fitness Club

CERN Multimedia

Fitness Club

2010-01-01

Nordic Walking Please note that the subscriptions for the general fitness classes from July to December are open: Subscriptions general fitness classes Jul-Dec 2010 Sign-up to the Fitness Club mailing list here Nordic Walking: Sign-up to the Nordic Walking mailing list here Beginners Nordic walking lessons Monday Lunchtimes (rdv 12:20 for 12:30 departure) 13.09/20.09/27.09/04.10 11.10/18.10/08.11/15.11 22.11/29.11/06.12/20.12 Nordic walking lessons Tuesday evenings (rdv 17:50 for 18:00 departure) 07.09/14.09/21.09/28.09 05.10/12.10/19.10/26.10 Intermediate/Advanced Nordic walking outings (follow the nordic walking lessons before signing up for the outings) every Thursday from 16.09 - 16.12, excluding 28.10 and 09.12 Subscriptions and info: fitness.club@cern.ch  

Comparison of evaluated data for chromium-52, iron-56 and nickel-58 - International Evaluation Co-operation Volume 1

International Nuclear Information System (INIS)

Fu, C.Y.; Larson, Duane C.; Hetrick, David M.; Vonach, Herbert; Maino, G.; Menapace, Enzo; Mengoni, I.; Asami, T.; Chiba, Satoshi; Shibata, Keiichi Kanagawa; Iijima, S.; Yamamuro, N.; Kopecky, J.

1992-01-01

A Working Party on International Evaluation Co-operation was established under the sponsorship of the OECD/NEA Nuclear Science Committee (NSC) to promote the exchange of information on nuclear data evaluations, validation, and related topics. Its aim is also to provide a framework for co-operative activities between members of the major nuclear data evaluation projects. This includes the possible exchange of scientists in order to encourage co-operation. Requirements for experimental data resulting from this activity are compiled. The Working Party determines common criteria for evaluated nuclear data files with a view to assessing and improving the quality and completeness of evaluated data. The Parties to the project are: ENDF (United States), JEFF/EFF (NEA Data Bank Member countries), and JENDL (Japan). Co-operation with evaluation projects of non-OECD countries are organised through the Nuclear Data Section of the International Atomic Energy Agency (IAEA). This report is issued by a Subgroup investigating discrepancies in different evaluations of the major structural materials. The isotopes selected are Chromium-52, Iron-56 and Nickel-58. Graphical overlay comparisons between cross-sections, and also energy-angle correlated particle distributions, in different evaluated libraries was performed. Benefits from these comparisons include information useful for improving structural material evaluations in individual data libraries, for assessing differences associated with present-day evaluation techniques and for development of techniques for graphical representation of the energy-angle correlated data

Physical Fitness of Adults with an Intellectual Disability: A 13-Year Follow-up Study.

Science.gov (United States)

Graham, Andrew; Reid, Greg

2000-01-01

Examined changes in physical fitness of middle-aged adults with mental retardation over 13 years. The subjects had participated in a physical fitness study in 1983. They were re-evaluated for cardiovascular endurance, muscular strength, muscular endurance, flexibility, and body composition. Fitness levels declined over the 13 years and were low…

Utilization of Additive Manufacturing in Evaluating the Performance of Internally Defected Materials

Science.gov (United States)

Mourad, A.-H. I.; Ghazal, A. M.; Syam, M. M.; Qadi, O. D. Al; Jassmi, H. Al

2018-05-01

The elimination of internal defects in a material present in the raw material or generated during the manufacturing or service is difficult. The inclusions of the defects have an adverse effect on the load bearing capacity. The presence of the cracks subjected to a specific orientation in materials or machinery can cause devastating unexpected failure during operation. Analysis of the failure in the components with cracks is more confined to analytical and numerical evaluation. The experimental evaluation has been tedious due to the complexity of replicating the actual defected component. The potential of additive manufacturing in developing user-defined components with cracks for the experimental evaluation is explored in this research. The present research investigated the effect of the internal elliptical cracks aligned at different orientations on the mechanical performance of polylactic acid (Green filament). The Fusion Deposition Method was utilized for the development of the standard tensile specimens with internal elliptical crack oriented at 0°, 45° and 90° using UltiMaker 2. The results proved that there is a considerable reduction in the load bearing capacity due to the presence of the cracks. The maximum load bearing capacity decreased by 15.01% for the specimen with crack inclined at 0° to the lateral axis compared to crack- free specimen. The nature of the fracture and the stress-strain graph evidently showcase the brittle nature of the material. The SEM image of the fractured region proved the phenomenal characteristics such as strong adhesion between the layers and the proper material flow. In the light of the results of this work, it can be concluded that the 3-D printing methodology is effective for evaluating the mechanical performance of the internally defected material.

The International Criticality Safety Benchmark Evaluation Project

International Nuclear Information System (INIS)

Briggs, B. J.; Dean, V. F.; Pesic, M. P.

2001-01-01

In order to properly manage the risk of a nuclear criticality accident, it is important to establish the conditions for which such an accident becomes possible for any activity involving fissile material. Only when this information is known is it possible to establish the likelihood of actually achieving such conditions. It is therefore important that criticality safety analysts have confidence in the accuracy of their calculations. Confidence in analytical results can only be gained through comparison of those results with experimental data. The Criticality Safety Benchmark Evaluation Project (CSBEP) was initiated in October of 1992 by the US Department of Energy. The project was managed through the Idaho National Engineering and Environmental Laboratory (INEEL), but involved nationally known criticality safety experts from Los Alamos National Laboratory, Lawrence Livermore National Laboratory, Savannah River Technology Center, Oak Ridge National Laboratory and the Y-12 Plant, Hanford, Argonne National Laboratory, and the Rocky Flats Plant. An International Criticality Safety Data Exchange component was added to the project during 1994 and the project became what is currently known as the International Criticality Safety Benchmark Evaluation Project (ICSBEP). Representatives from the United Kingdom, France, Japan, the Russian Federation, Hungary, Kazakhstan, Korea, Slovenia, Yugoslavia, Spain, and Israel are now participating on the project In December of 1994, the ICSBEP became an official activity of the Organization for Economic Cooperation and Development - Nuclear Energy Agency's (OECD-NEA) Nuclear Science Committee. The United States currently remains the lead country, providing most of the administrative support. The purpose of the ICSBEP is to: (1) identify and evaluate a comprehensive set of critical benchmark data; (2) verify the data, to the extent possible, by reviewing original and subsequently revised documentation, and by talking with the

The fit of cobalt-chromium three-unit fixed dental prostheses fabricated with four different techniques: a comparative in vitro study.

Science.gov (United States)

Örtorp, Anders; Jönsson, David; Mouhsen, Alaa; Vult von Steyern, Per

2011-04-01

This study sought to evaluate and compare the marginal and internal fit in vitro of three-unit FDPs in Co-Cr made using four fabrication techniques, and to conclude in which area the largest misfit is present. An epoxy resin master model was produced. The impression was first made with silicone, and master and working models were then produced. A total of 32 three-unit Co-Cr FDPs were fabricated with four different production techniques: conventional lost-wax method (LW), milled wax with lost-wax method (MW), milled Co-Cr (MC), and direct laser metal sintering (DLMS). Each of the four groups consisted of eight FDPs (test groups). The FDPs were cemented on their cast and standardised-sectioned. The cement film thickness of the marginal and internal gaps was measured in a stereomicroscope, digital photos were taken at 12× magnification and then analyzed using measurement software. Statistical analyses were performed with one-way ANOVA and Tukey's test. Best fit based on the means (SDs) in μm for all measurement points was in the DLMS group 84 (60) followed by MW 117 (89), LW 133 (89) and MC 166 (135). Significant differences were present between MC and DLMS (p<0.05). The regression analyses presented differences within the parameters: production technique, tooth size, position and measurement point (p < 0.05). Best fit was found in the DLMS group followed by MW, LW and MC. In all four groups, best fit in both abutments was along the axial walls and in the deepest part of the chamfer preparation. The greatest misfit was present occlusally in all specimens. Copyright © 2010 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

The global electroweak fit at NNLO and prospects for the LHC and ILC

International Nuclear Information System (INIS)

Baak, M.; Hoecker, A.; Cuth, J.; Schott, M.; Haller, J.; Kogler, R.; Moenig, K.; Stelzer, J.

2014-01-01

For a long time, global fits of the electroweak sector of the standard model (SM) have been used to exploit measurements of electroweak precision observables at lepton colliders (LEP, SLC), together with measurements at hadron colliders (Tevatron, LHC) and accurate theoretical predictions at multi-loop level, to constrain free parameters of the SM, such as the Higgs and top masses. Today, all fundamental SM parameters entering these fits are experimentally determined, including information on the Higgs couplings, and the global fits are used as powerful tools to assess the validity of the theory and to constrain scenarios for new physics. Future measurements at the Large Hadron Collider (LHC) and the International Linear Collider (ILC) promise to improve the experimental precision of key observables used in the fits. This paper presents updated electroweak fit results using the latest NNLO theoretical predictions and prospects for the LHC and ILC. The impact of experimental and theoretical uncertainties is analysed in detail. We compare constraints from the electroweak fit on the Higgs couplings with direct LHC measurements, and we examine present and future prospects of these constraints using a model with modified couplings of the Higgs boson to fermions and bosons. (orig.)

Fitness on facebook: advertisements generated in response to profile content.

Science.gov (United States)

Villiard, Hope; Moreno, Megan A

2012-10-01

Obesity is a challenging problem affecting almost half of college students. To solve this complex health problem, innovative approaches must be utilized. Over 94 percent of college students maintain a Facebook profile, providing them a venue to publicly disclose current fitness behaviors. Displayed advertisements on Facebook are tailored to profile content and may influence college students' fitness efforts. Facebook may be an innovative venue for improving college students' fitness behaviors. The purpose of this project was to determine (a) how and to what extent college students are discussing fitness on Facebook, and (b) how user-generated fitness information is linked to advertisements for fitness products and advice. First, public Facebook profiles of individual college students were evaluated for displayed fitness references based on 10 fitness behavior categories. Inter-rator reliability between two coders was 91.18 percent. Second, 10 fitness status updates were generated and posted by a researcher on a Facebook profile; the first 40 linked advertisements to these statements were examined. Advertisements were categorized and then examined for relevance to the college population. A total of 57 individual profiles were examined; owners had an average age of 18.3 years (SD=0.51), and 36.8 percent were women. About 71.9 percent of profiles referenced one or more fitness behavior; 97.6 percent referenced exercise, 4.9 percent dieting, and 4.9 percent unhealthy eating. Among the first 40 ads linked to generated status updates, 40.3 percent were fitness related. Most advertisements were for charity runs (30.4 percent), fitness apparel (24.2 percent), or fad diets (9.9 percent). Students referred both healthy and unhealthy fitness behaviors on their Facebook profiles, and these trigger the display of fitness-related advertisements of which few appear applicable. A community- or university-based intervention could be designed and implemented to provide relevant and

Evaluating Internal Model Strength and Performance of Myoelectric Prosthesis Control Strategies.

Science.gov (United States)

Shehata, Ahmed W; Scheme, Erik J; Sensinger, Jonathon W

2018-05-01

On-going developments in myoelectric prosthesis control have provided prosthesis users with an assortment of control strategies that vary in reliability and performance. Many studies have focused on improving performance by providing feedback to the user but have overlooked the effect of this feedback on internal model development, which is key to improve long-term performance. In this paper, the strength of internal models developed for two commonly used myoelectric control strategies: raw control with raw feedback (using a regression-based approach) and filtered control with filtered feedback (using a classifier-based approach), were evaluated using two psychometric measures: trial-by-trial adaptation and just-noticeable difference. The performance of both strategies was also evaluated using Schmidt's style target acquisition task. Results obtained from 24 able-bodied subjects showed that although filtered control with filtered feedback had better short-term performance in path efficiency ( ), raw control with raw feedback resulted in stronger internal model development ( ), which may lead to better long-term performance. Despite inherent noise in the control signals of the regression controller, these findings suggest that rich feedback associated with regression control may be used to improve human understanding of the myoelectric control system.

Current indirect fitness and future direct fitness are not incompatible.

Science.gov (United States)

Brahma, Anindita; Mandal, Souvik; Gadagkar, Raghavendra

2018-02-01

In primitively eusocial insects, many individuals function as workers despite being capable of independent reproduction. Such altruistic behaviour is usually explained by the argument that workers gain indirect fitness by helping close genetic relatives. The focus on indirect fitness has left open the question of whether workers are also capable of getting direct fitness in the future in spite of working towards indirect fitness in the present. To investigate this question, we recorded behavioural profiles of all wasps on six naturally occurring nests of Ropalidia marginata , and then isolated all wasps in individual plastic boxes, giving them an opportunity to initiate nests and lay eggs. We found that 41% of the wasps successfully did so. Compared to those that failed to initiate nests, those that did were significantly younger, had significantly higher frequency of self-feeding behaviour on their parent nests but were not different in the levels of work performed in the parent nests. Thus ageing and poor feeding, rather than working for their colonies, constrain individuals for future independent reproduction. Hence, future direct fitness and present work towards gaining indirect fitness are not incompatible, making it easier for worker behaviour to be selected by kin selection or multilevel selection. © 2018 The Author(s).

Fit Families Program Improves Self-Perception in Children.

Science.gov (United States)

Archuleta, Martha; VanLeeuwen, Dawn; Turner, Carol

2016-06-01

To determine the impact of the Fit Families youth weight management program on self-perception of participants. Fit Families was delivered through Cooperative Extension and provided education to overweight and obese children and their families on healthful eating and physical activity along with building self-esteem and social competence. At the beginning and end of the 7-week program, a convenience sample of 46 youth completed the Self-Perception Profile for Children questionnaire to evaluate changes in self-perception. Youth had improved self-perception in the areas of athletic competence (P = .04) and physical appearance (P = .007) after participating in Fit Families. Fit Families provides a holistic approach to weight management that promotes positive self-perception, which may decrease the burden of depression, anxiety, and low self-esteem obese youth face. Copyright © 2016 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Unge, sundhed og fitness

DEFF Research Database (Denmark)

Jensen, Jens-Ole

2003-01-01

Artiklen redegør for udbredelsen af fitness blandt unge og diskuterer, hvor det er blevet så populært at dyrke fitness.......Artiklen redegør for udbredelsen af fitness blandt unge og diskuterer, hvor det er blevet så populært at dyrke fitness....

Transcending the Curricular Barrier between Fitness and Reading with FitLit

Science.gov (United States)

Opitz, Michael F.

2011-01-01

The author discusses how FitLit, children's literature that spotlights the multiple aspects of health and well-being, offers a vehicle for integrating reading and fitness into existing classroom routines such as guided reading, read-alouds, independent reading, and reading and writing workshop. Sample FitLit titles are provided as well as a…

QUALITY OF AN ACADEMIC STUDY PROGRAMME - EVALUATION MODEL

Directory of Open Access Journals (Sweden)

Mirna Macur

2016-01-01

Full Text Available Quality of an academic study programme is evaluated by many: employees (internal evaluation and by external evaluators: experts, agencies and organisations. Internal and external evaluation of an academic programme follow written structure that resembles on one of the quality models. We believe the quality models (mostly derived from EFQM excellence model don’t fit very well into non-profit activities, policies and programmes, because they are much more complex than environment, from which quality models derive from (for example assembly line. Quality of an academic study programme is very complex and understood differently by various stakeholders, so we present dimensional evaluation in the article. Dimensional evaluation, as opposed to component and holistic evaluation, is a form of analytical evaluation in which the quality of value of the evaluand is determined by looking at its performance on multiple dimensions of merit or evaluation criteria. First stakeholders of a study programme and their views, expectations and interests are presented, followed by evaluation criteria. They are both joined into the evaluation model revealing which evaluation criteria can and should be evaluated by which stakeholder. Main research questions are posed and research method for each dimension listed.

A framework for the monitoring and evaluation of international surgical initiatives in low- and middle-income countries.

Science.gov (United States)

Ibrahim, George M; Cadotte, David W; Bernstein, Mark

2015-01-01

An estimated two billion people worldwide lack adequate access to surgical care. To address this humanitarian emergency, an increasing number of international surgical partnerships are emerging between developed and low- and middle-income countries (LMICs). At present, there are no clear indicators that may be used to assess the effectiveness of such initiatives. We conducted an international qualitative study of 31 surgeons from developed and LMICs involved in international partnerships across a variety of subspecialties. Thematic analysis and grounded theory were applied in order to develop a practical framework that may be applied to monitor and evaluate global surgical initiatives. Several themes emerged from the study: (i) there is a large unmet need to establish and maintain prospective databases in LMICs to inform the monitoring and evaluation of international surgical partnerships; (ii) assessment of initiatives must occur longitudinally over the span of several years; (ii) the domains of assessment are contextual and encompass cultural, institutional and regional factors; and (iv) evaluation strategies should explore broader impact within the community and country. Based on thematic analysis within the domains of inputs, outputs and outcomes, a framework for the monitoring and evaluation of international surgical initiatives, the Framework for the Assessment of InteRNational Surgical Success (FAIRNeSS) is proposed. In response to the increasing number of surgical partnerships between developed and LMICs, we propose a framework to monitor and evaluate international surgical initiatives.

Fodbold Fitness

DEFF Research Database (Denmark)

Bennike, Søren

Samfundet forandrer sig og ligeså gør danskernes idrætsmønstre. Fodbold Fitness, der er afhandlingens omdrejningspunkt, kan iagttages som en reaktion på disse forandringer. Afhandlingen ser nærmere på Fodbold Fitness og implementeringen af dette, der ingenlunde er nogen let opgave. Bennike bidrager...

Evaluation of Logistics Centres Establishment: External and Internal Factors

OpenAIRE

Rasciauskaite, Daiva; Raudeliūnienė, Jurgita

2011-01-01

One of the most important research objects in comprehensive theories of strategic management for theoreticians and representatives of logistics is making appropriate competitive strategic decisions and achieving a competitive advantage in dynamic and uncertain business environment. The aim of the topic is to create the conceptual model of evaluation of logistics centres establishment, which allows complex assessment of external and internal factors of competition of logistics centres. The pro...

Broad-spectrum physical fitness benefits of recreational football

DEFF Research Database (Denmark)

Milanović, Zoran; Pantelić, Saša; Čović, Nedim

2018-01-01

, narrative reviews have demonstrated beneficial effects of recreational football on physical fitness and health status. OBJECTIVE: The purpose of this systematic review and meta-analysis was to evaluate the magnitude of effects of recreational football on blood pressure, body composition, lipid profile...... and muscular fitness with reference to age, gender and health status. DESIGN: Systematic review and meta-analysis. DATA SOURCES: MEDLINE, PubMed, SPORTDiscus, Web of Science, Cumulative Index to Nursing and Allied Health Literature (CINAHL) and Google Scholar were searched prior to 1 February 2017. In addition...... to a recreational football group or any other type of exercises or passive control group were included. Training programmes had to last at least 2 weeks to meet the inclusion criteria. The primary outcome measures were blood pressure, resting heart rate, body composition, muscular fitness, and blood lipids...

Developing an assessment based on physical fitness age to evaluate motor function in frail and healthy elderly women.

Science.gov (United States)

Nakagaichi, Masaki; Anan, Yuya; Hikiji, Yuto; Uratani, Sou

2018-01-01

The purpose of this study was to identify a method for assessing physical fitness age that is easy to use with both frail and healthy elderly women and to examine its validity. Principal component analysis was used to develop a formula of physical fitness age from four motor function variables. The subjects comprised 688 (75.7±6.0 years) elderly women, in order to develop a physical fitness scale. The formula for calculating physical fitness age was expressed as physical fitness age =-0.419× grip strength -0.096× balancing on one leg with eyes open -0.737×30 s chair stand +0.503× figure-of-8 walking test +0.47× chronological age +52.68. Measures obtained from subjects in the frail elderly (n=11, 73.0±2.3 years) and exercise (n=10, 70.8±3.1 years) groups were used to examine the validity of the assessment. The mean physical fitness age of the frail elderly group (79.0±3.7 years) was significantly higher than its mean chronological age (73.0±2.3 years, p fitness age of the exercise group (65.6±3.1 years) was significantly lower than the chronological age (70.8±3.1 years, p fitness age scores are applicable to frail and healthy elderly women. Physical fitness age is a valid measure of motor function in elderly women.

An evaluation of internal communication in the local council of Moqhaka Municipality

Directory of Open Access Journals (Sweden)

Lazarus Mohapi Maleho

2011-01-01

Full Text Available Municipalities face the task of communicating their policies and practices to employees. Their purpose is to achieve an understanding of their strategies by all stakeholders, including their employees. The research conducted exhibited evidence that Moqhaka Municipality in Free State Province of South Africa recognised the need to address the issue of internal communications but had not been involved in any in-depth assessment of its internal communications, nor did it have a written internal communication strategy. The first stage of the empirical study was to identify the current communication strategy within the particular municipality. Official documents were analysed and qualitative semi-structured interviews were conducted with key role players selected according to their expertise, availability and knowledge regarding the research topic. In the second stage the researcher focused on the employees’ perceptions and needs with regard to the internal communication at their workplace. To gather information, self-administered open and closed-ended questionnaires were distributed to employees. It was established through the literature study, that a need does exist for the internal communication to undergo regular evaluation. The results showed a general dissatisfaction in respect of communication and specific dissatisfaction in relation to particular areas of the organisation. The findings demonstrate not only the need to evaluate communication in an organisation on a regular basis, but also the importance of communication to employees, and the general need for improved organisational communication.

Evaluation of osseous changes of TMJ in internal derangement and osteoarthritis patients using MRI

International Nuclear Information System (INIS)

Cho, Su Beom; Koh, Kwang Joon

2001-01-01

To evaluate the osseous changes of TMJ in internal derangement and osteoarthritis patients using MRI. MR images of 111 TMJs in 64 patients were analyzed to evaluate the osseous changes. 111 TMJs were divided into 6 groups according to the radiologic Stages by Schellhas and Wilkes. On MR images, we evaluate the osseous changes of articular eminence and condylar head. The most frequent Stage in internal derangement of TMJ was Stage Ι. And 38 joints (25.2%) revealed osteoarthritis with internal derangement. When osseous change of articular eminence and condylar head occur, flattening was the most common osseous change. Sclerosis was observed in all Stages and osteophytosis of condylar head was observed in Stage ΙΙ (1.8%) and ΙΙΙ (0.9%). Out of 28 joints with osteoarthritis, 6 joints (21.4%) showed joint effusion. MR image revealed abnormal configuration of disk, but the detection of minimal osseous change was subtle

Fit-for-purpose: species distribution model performance depends on evaluation criteria - Dutch Hoverflies as a case study.

Science.gov (United States)

Aguirre-Gutiérrez, Jesús; Carvalheiro, Luísa G; Polce, Chiara; van Loon, E Emiel; Raes, Niels; Reemer, Menno; Biesmeijer, Jacobus C

2013-01-01

Understanding species distributions and the factors limiting them is an important topic in ecology and conservation, including in nature reserve selection and predicting climate change impacts. While Species Distribution Models (SDM) are the main tool used for these purposes, choosing the best SDM algorithm is not straightforward as these are plentiful and can be applied in many different ways. SDM are used mainly to gain insight in 1) overall species distributions, 2) their past-present-future probability of occurrence and/or 3) to understand their ecological niche limits (also referred to as ecological niche modelling). The fact that these three aims may require different models and outputs is, however, rarely considered and has not been evaluated consistently. Here we use data from a systematically sampled set of species occurrences to specifically test the performance of Species Distribution Models across several commonly used algorithms. Species range in distribution patterns from rare to common and from local to widespread. We compare overall model fit (representing species distribution), the accuracy of the predictions at multiple spatial scales, and the consistency in selection of environmental correlations all across multiple modelling runs. As expected, the choice of modelling algorithm determines model outcome. However, model quality depends not only on the algorithm, but also on the measure of model fit used and the scale at which it is used. Although model fit was higher for the consensus approach and Maxent, Maxent and GAM models were more consistent in estimating local occurrence, while RF and GBM showed higher consistency in environmental variables selection. Model outcomes diverged more for narrowly distributed species than for widespread species. We suggest that matching study aims with modelling approach is essential in Species Distribution Models, and provide suggestions how to do this for different modelling aims and species' data

Internal rotor friction instability

Science.gov (United States)

Walton, J.; Artiles, A.; Lund, J.; Dill, J.; Zorzi, E.

1990-01-01

The analytical developments and experimental investigations performed in assessing the effect of internal friction on rotor systems dynamic performance are documented. Analytical component models for axial splines, Curvic splines, and interference fit joints commonly found in modern high speed turbomachinery were developed. Rotor systems operating above a bending critical speed were shown to exhibit unstable subsynchronous vibrations at the first natural frequency. The effect of speed, bearing stiffness, joint stiffness, external damping, torque, and coefficient of friction, was evaluated. Testing included material coefficient of friction evaluations, component joint quantity and form of damping determinations, and rotordynamic stability assessments. Under conditions similar to those in the SSME turbopumps, material interfaces experienced a coefficient of friction of approx. 0.2 for lubricated and 0.8 for unlubricated conditions. The damping observed in the component joints displayed nearly linear behavior with increasing amplitude. Thus, the measured damping, as a function of amplitude, is not represented by either linear or Coulomb friction damper models. Rotordynamic testing of an axial spline joint under 5000 in.-lb of static torque, demonstrated the presence of an extremely severe instability when the rotor was operated above its first flexible natural frequency. The presence of this instability was predicted by nonlinear rotordynamic time-transient analysis using the nonlinear component model developed under this program. Corresponding rotordynamic testing of a shaft with an interference fit joint demonstrated the presence of subsynchronous vibrations at the first natural frequency. While subsynchronous vibrations were observed, they were bounded and significantly lower in amplitude than the synchronous vibrations.

Evaluation of the Netherlands' International Test Facility for Smart Grids

Energy Technology Data Exchange (ETDEWEB)

Palmintier, Bryan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Pratt, Annabelle [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2015-06-01

The Netherlands Enterprise Agency (Rijksdienst voor Ondernemend Nederland, or RVO) engaged the U.S. National Renewable Energy Laboratory (NREL) for two primary purposes: to evaluate the International Test Facility for Smart Grids (ITF) sponsored by RVO and to learn best practices for integrated test facilities from NREL's Energy Systems Integration Facility (ESIF). This report covers the ITF evaluation and is largely based on a one-week visit to the Netherlands in November 2014.

Fit, Interplay, and Scale: A Diagnosis

Directory of Open Access Journals (Sweden)

Arild Vatn

2012-12-01

Full Text Available Developing institutions to handle human-environment interactions well is important. In relation to that, the theory of resource regimes, and the themes of fit, interplay, and scale - as originating not least in the work of Oran Young - are core. His work is very impressive. At the same time we observe two sets of issues where we think further development is needed. The first relates to the ontological underpinning of Young's conceptual framework. The second set of issues concerns the definitions of and the relationships between the concepts of fit, interplay, and scale. Regarding the former, we emphasize issues related to "marrying" different theories about human action. Regarding the latter, we note that while the three concepts have a lot of practical appeal, there are still some important challenges surfacing, not least when using them in empirical research. We analyze three challenges: the definitions of the concepts; their internal overlap; and finally, the way environmental regimes are defined and understood as opposed to the wider institutional context of the economy. Our paper offers some direction for how to move forward on the issues specified.

Health-related physical fitness and weight status in 13- to 15-year-old Latino adolescents. A pooled analysis.

Science.gov (United States)

García-Hermoso, Antonio; Correa-Bautista, Jorge E; Olloquequi, Jordi; Ramírez-Vélez, Robinson

2018-05-05

The aim of this study was to investigate the relation between health-related physical fitness and weight status in 13- to 15-year-old Latino adolescents. The final sample consisted of 73,561 adolescents aged 13-15 years (35,175 girls) from Chile (n=48,771) and Colombia (n=24,790). Cardiorespiratory and musculoskeletal fitness were measured using 20-m shuttle run (relative peak oxygen uptake - VO 2peak ) and standing broad jump test (lower body explosive strength), respectively. The International Obesity Task Force definition was used to define weight status (i.e., underweight, normal weight, overweight, and obese). The present study found an inverted J-shape relationship between body mass index, cardiorespiratory fitness, and musculoskeletal fitness in both genders and all age groups (pfitness (based on new international criterion-referenced standards) profile when compared with their normal weight peers, except in girls aged 14 (p=0.268) and 15 years (p=0.280). The present results indicate low cardiorespiratory fitness and musculoskeletal fitness levels in underweight, overweight, and obese adolescents when compared with their normal weight peers. The findings appear to suggest that exercise programs should to decrease fat mass in overweight/obese adolescents and increase muscle mass in underweight adolescents. Copyright © 2018 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

Comparing Person Organization Fit and Person Job Fit

Directory of Open Access Journals (Sweden)

Kadir Ardıç

2016-07-01

Full Text Available Although there have been many studies conducted to analyze the effects of person-organization fit (POF and person-job fit (PJF on individual outcomes, little is known about which of these fit associates stronger with individual variables (i.e., intention to quit job, IQJ, and perceived individual performance, PIP. Therefore the purpose of the study is to compare the relationships of PJF and POF with IQJ and PIP. The sample of the study consists of security guards working at a private company's civil aviation safety department. Totally 98 security guards participated to the research. Results indicated that, the relationships of PJF and POF with IQJ and PIP were not significantly different. Consequently the results indicate that POF and PJF associate similarly with critical individual outcomes.

Young modulus and internal friction of a fiber-reinforced composite

International Nuclear Information System (INIS)

Ledbetter, H.M.; Lei, M.; Austin, M.W.

1986-01-01

By a kilohertz-frequency resonance method we determined the Young modulus and internal friction of a uniaxially fiber-reinforced composite. The composite comprised glass fibers in an epoxy-resin matrix. We studied three fiber contents: 0, 41, and 49 vol %. The Young modulus fit a linear rule of mixture. The internal friction fit a classical free-damped-oscillator model where one assumes a linear rule of mixture for three quantities: mass, force constant, and mechanical-resistance constant

Using a Non-Fit Message Helps to De-Intensify Negative Reactions to Tough Advice

Science.gov (United States)

Fridman, Ilona; Scherr, Karen; Glare, Paul; Higgins, E. Tory

2017-01-01

Sometimes physicians need to provide patients with potentially upsetting advice. For example, physicians may recommend hospice for a terminally ill patient because it best meets their needs, but the patient and their family dislike this advised option. We explore whether regulatory non-fit could be used to improve these types of situations. Across five studies in which participants imagined receiving upsetting advice from a physician, we demonstrate that regulatory non-fit between the form of the physician’s advice (emphasizing gains vs. avoiding losses) and the participants’ motivational orientation (promotion vs. prevention) improves participants’ evaluation of an initially disliked option. Regulatory non-fit de-intensifies participants’ initial attitudes by making them less confident in their initial judgments and motivating them to think more thoroughly about the arguments presented. Furthermore, consistent with previous research on regulatory fit, we showed that the mechanism of regulatory non-fit differs as a function of participants’ cognitive involvement in the evaluation of the option. PMID:27341845

Fitting Hidden Markov Models to Psychological Data

Directory of Open Access Journals (Sweden)

Ingmar Visser

2002-01-01

Full Text Available Markov models have been used extensively in psychology of learning. Applications of hidden Markov models are rare however. This is partially due to the fact that comprehensive statistics for model selection and model assessment are lacking in the psychological literature. We present model selection and model assessment statistics that are particularly useful in applying hidden Markov models in psychology. These statistics are presented and evaluated by simulation studies for a toy example. We compare AIC, BIC and related criteria and introduce a prediction error measure for assessing goodness-of-fit. In a simulation study, two methods of fitting equality constraints are compared. In two illustrative examples with experimental data we apply selection criteria, fit models with constraints and assess goodness-of-fit. First, data from a concept identification task is analyzed. Hidden Markov models provide a flexible approach to analyzing such data when compared to other modeling methods. Second, a novel application of hidden Markov models in implicit learning is presented. Hidden Markov models are used in this context to quantify knowledge that subjects express in an implicit learning task. This method of analyzing implicit learning data provides a comprehensive approach for addressing important theoretical issues in the field.

Countermeasures (iRED, ARED CEVIS, MEC, TVIS, T2, Periodic Fitness Evaluation, BP-ECG, HRM). Critical Readiness Review Increment 23 and 24

Science.gov (United States)

Toder, Carly; Gipson, Iona; Conly, Danielle; Nieschwitz, Linda; Perk, Austin

2010-01-01

This slide presentation reviews attempts to counteract the effects of being in space. It includes information on the Resistive Exercise Device (RED), the Advanced Resistive Exercise Device (ARED), Cycle Ergometer with Vibration Isolation and Stabilization (CEVIS), Treadmill with Vibration Isolation and Stabilization (TVIS) and periodic fitness evaluation with specific information on BP/ECG, heart rate monitor 2 and data distribution.

The Benefits of High Intensity Functional Training (HIFT) Fitness Programs for Military Personnel

Science.gov (United States)

Haddock, Christopher K.; Poston, Walker S.C.; Heinrich, Katie M.; Jahnke, Sara A.; Jitnarin, Nattinee

2016-01-01

High intensity functional training (HIFT) programs are designed to address multiple fitness domains, potentially providing improved physical and mental readiness in a changing operational environment. Programs consistent with HIFT principals such as CrossFit, SEALFIT and the US Marine Corps’ High Intensity Tactical Training (HITT) program are increasingly popular among military personnel. This article reviews the practical, health, body composition, and military fitness implications of HIFT exercise programs. We conclude that, given the unique benefits of HIFT, the military should consider evaluating whether these programs should be the standard for military fitness training. PMID:27849484

Fitness club

CERN Multimedia

Fitness club

2013-01-01

  Nordic Walking Classes Come join the Nordic walking classes and outings offered by the CERN Fitness Club starting September 2013. Our licensed instructor Christine offers classes for people who’ve never tried Nordic Walking and who would like to learn the technique, and outings for people who have completed the classes and enjoy going out as a group. Course 1: Tuesdays 12:30 - 13:30 24 September, 1 October, 8 October, 15 October Course 2: Tuesdays 12:30 - 13:30 5 November, 12 November, 19 November, 26 November Outings will take place on Thursdays (12:30 to 13:30) from 12 September 2013. We meet at the CERN Club Barracks car park (close to Entrance A) 10 minutes before departure. Prices: 50 CHF for 4 classes, including the 10 CHF Club membership. Payments made directly to instructor. Renting Poles: Poles can be rented from Christine at 5 CHF / hour. Subscription: Please subscribe at: http://cern.ch/club-fitness Looking forward to seeing you among us! Fitness Club FitnessClub@c...

Fitness Club

CERN Multimedia

Fitness Club

2012-01-01

Get in Shape for Summer with the CERN Fitness Club Saturday 23 June 2012 from 14:30 to 16.30 (doors open at 14.00) Germana’s Fitness Workshop. Build strength and stamina, sculpt and tone your body and get your heart pumping with Germana’s workout mixture of Cardio Attack, Power Pump, Power Step, Cardio Combat and Cross-Training. Where: 216 (Pump room – equipped with changing rooms and showers). What to wear: comfortable clothes and indoor sports shoes + bring a drink! How much: 15 chf Sign up here: https://espace.cern.ch/club-fitness/Lists/Test_Subscription/NewForm.aspx? Join the Party and dance yourself into shape at Marco + Marials Zumba Masterclass. Saturday 30 June 2012 from 15:00 to 16:30 Marco + Mariel’s Zumba Masterclass Where: 216 (Pump room – equipped with changing rooms and showers). What to wear: comfortable clothes and indoor sports shoes + bring a drink! How much: 25 chf Sign up here: https://espace.cern.ch/club-fitness/Lists/Zumba%20...

Fitness Club

CERN Multimedia

Fitness Club

2012-01-01

  The CERN Fitness Club is pleased to announce its new early morning class which will be taking place on: Tuesdays from 24th April 07:30 to 08:15 216 (Pump Hall, close to entrance C) – Facilities include changing rooms and showers. The Classes: The early morning classes will focus on workouts which will help you build not only strength and stamina, but will also improve your balance, and coordination. Our qualified instructor Germana will accompany you throughout the workout  to ensure you stay motivated so you achieve the best results. Sign up and discover the best way to start your working day full of energy! How to subscribe? We invite you along to a FREE trial session, if you enjoy the activity, please sign up via our website: https://espace.cern.ch/club-fitness/Activities/SUBSCRIBE.aspx. * * * * * * * * Saturday 28th April Get in shape for the summer at our fitness workshop and zumba dance party: Fitness workshop with Germana 13:00 to 14:30 - 216 (Pump Hall) Price...

Task-technology fit of video telehealth for nurses in an outpatient clinic setting.

Science.gov (United States)

Cady, Rhonda G; Finkelstein, Stanley M

2014-07-01

Incorporating telehealth into outpatient care delivery supports management of consumer health between clinic visits. Task-technology fit is a framework for understanding how technology helps and/or hinders a person during work processes. Evaluating the task-technology fit of video telehealth for personnel working in a pediatric outpatient clinic and providing care between clinic visits ensures the information provided matches the information needed to support work processes. The workflow of advanced practice registered nurse (APRN) care coordination provided via telephone and video telehealth was described and measured using a mixed-methods workflow analysis protocol that incorporated cognitive ethnography and time-motion study. Qualitative and quantitative results were merged and analyzed within the task-technology fit framework to determine the workflow fit of video telehealth for APRN care coordination. Incorporating video telehealth into APRN care coordination workflow provided visual information unavailable during telephone interactions. Despite additional tasks and interactions needed to obtain the visual information, APRN workflow efficiency, as measured by time, was not significantly changed. Analyzed within the task-technology fit framework, the increased visual information afforded by video telehealth supported the assessment and diagnostic information needs of the APRN. Telehealth must provide the right information to the right clinician at the right time. Evaluating task-technology fit using a mixed-methods protocol ensured rigorous analysis of fit within work processes and identified workflows that benefit most from the technology.

Accuracy of 3 different impression techniques for internal connection angulated implants.

Science.gov (United States)

Tsagkalidis, George; Tortopidis, Dimitrios; Mpikos, Pavlos; Kaisarlis, George; Koidis, Petros

2015-10-01

Making implant impressions with different angulations requires a more precise and time-consuming impression technique. The purpose of this in vitro study was to compare the accuracy of nonsplinted, splinted, and snap-fit impression techniques of internal connection implants with different angulations. An experimental device was used to allow a clinical simulation of impression making by means of open and closed tray techniques. Three different impression techniques (nonsplinted, acrylic-resin splinted, and indirect snap-fit) for 6 internal-connected implants at different angulations (0, 15, 25 degrees) were examined using polyether. Impression accuracy was evaluated by measuring the differences in 3-dimensional (3D) position deviations between the implant body/impression coping before the impression procedure and the coping/laboratory analog positioned within the impression, using a coordinate measuring machine. Data were analyzed by 2-way ANOVA. Means were compared with the least significant difference criterion at Pimpression technique exhibited a higher accuracy than the other techniques studied when increased implant angulations at 25 degrees were involved. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Evaluation of Three Cases Using a Novel Titanium Mesh System-Skull-Fit with Orbital Wall (Skull-Fit WOW)-For Cranial Base Reconstructions.

Science.gov (United States)

Hattori, Noriko; Nakajima, Hideo; Tamada, Ikkei; Sakamoto, Yoshiaki; Ohira, Takayuki; Yoshida, Kazunari; Kawase, Takeshi; Kishi, Kazuo

2011-09-01

Cranial base reconstructions associated with tumor resections around the orbital wall often require that both the upper and lateral orbital walls be reconstructed during a single procedure. Previously, we used titanium mesh plates that were preoperatively fabricated based on three-dimensional models. Although these plates are precise and do not increase the probability of infection, we still had to use autologous bones to reconstruct the orbital walls. Recently, we developed a new titanium mesh plate-called Skull-Fit(®)-with orbital wall (Skull-Fit WOW(®)), enabling us to reconstruct the cranial base and orbital walls without bone grafts. Here, we report on three reconstruction cases in which the novel titanium mesh-orbital wall system was used. In all three cases, the customized titanium mesh system performed satisfactorily with little, if any, complications.

Low-memory iterative density fitting.

Science.gov (United States)

Grajciar, Lukáš

2015-07-30

A new low-memory modification of the density fitting approximation based on a combination of a continuous fast multipole method (CFMM) and a preconditioned conjugate gradient solver is presented. Iterative conjugate gradient solver uses preconditioners formed from blocks of the Coulomb metric matrix that decrease the number of iterations needed for convergence by up to one order of magnitude. The matrix-vector products needed within the iterative algorithm are calculated using CFMM, which evaluates them with the linear scaling memory requirements only. Compared with the standard density fitting implementation, up to 15-fold reduction of the memory requirements is achieved for the most efficient preconditioner at a cost of only 25% increase in computational time. The potential of the method is demonstrated by performing density functional theory calculations for zeolite fragment with 2592 atoms and 121,248 auxiliary basis functions on a single 12-core CPU workstation. © 2015 Wiley Periodicals, Inc.

Profile of Physical Fitness of Young Football Players at SDN Cibeusi

Directory of Open Access Journals (Sweden)

Subashini Periasamy

2015-06-01

Full Text Available Background: Health-related physical fitness components are important in hypokinetic disease prevention and good sports performance. The aim of this research is to evaluate the physical fitness profile of the SDN Cibeusi young football players based on Fitnessgram. Methods: This study was participated by 20 subjects ranging from 10 to 12 years old boys who played for the school football team in SDN Cibeusi. This descriptive study was conducted in the school field in the month of November 2012. Physical fitness components that were tested are aerobic capacity,V02 max using the one-mile run test, muscle endurance by performing push-up and curl-up test, flexibility using the flexometer and body composition by measuring the body mass index and fat fold measurement. The mean and standard deviation of the results were tabulated. Results: Aerobic capacity and percentage of body fat showed 100% of them scored in the category of healthy fitness zone. For body mass index, 55% scored in healthy fitness zone, 25% ni-some risk, and 10% each for ni-high risk and very lean. For push-up test and curl-up test, 80% and 65% scored in the healthy fitness zone while the remaining 20% and 35% respectively scored in the not healthy fitness zone. For flexibility, 75% of them scored in healthy fitness zone and 25% scored in not healthy fitness zone. Conclusions: The physical fitness level in these young football players is mostly in healthy fitness zone.

Promotion of nutrition care by Australian fitness businesses: a website analysis.

Science.gov (United States)

Barnes, K; Ball, L; Desbrow, B

2016-11-01

To investigate the intention of fitness businesses to promote the provision of nutrition care from personal trainers. Cross-sectional evaluation of webpage content. Fitness businesses within two Australian federal electorates were identified using the Fitness Australia list of registered fitness businesses. Inductive content analysis of these fitness business websites and associated social media sites was undertaken to compare website content to the Fitness Australia Position Statement outlining the Roles and Responsibilities of Registered Fitness Professionals. Fitness businesses were classified as 'within scope of practice' if they referred to national nutrition guidelines or dietetic services. 'At risk of being beyond scope' included websites which did not include enough information to definitively state within or beyond scope. Fitness businesses were classified as 'definitely beyond scope of practice' if they advertised nutrition care which clearly extended beyond translation of the national dietary guidelines. Of the businesses reviewed, 15% were within scope despite none referring to a dietitian; 34% were at risk of being beyond scope; and 51% were beyond scope as they advertised nutrition care such as personalized diets without indicating dietetic input. A considerable portion of fitness businesses reviewed advertised their personal trainers as able to provide nutrition care outside the recommended scope of practice. Strategies that help fitness businesses and personal trainers to support clients to have healthy dietary behaviours without extending outside the scope of practice are warranted. Copyright © 2016 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Relationship between Body Mass Index, Cardiorespiratory and Musculoskeletal Fitness among South African Adolescent Girls.

Science.gov (United States)

Bonney, Emmanuel; Ferguson, Gillian; Smits-Engelsman, Bouwien

2018-05-28

Background : Cardiorespiratory and musculoskeletal fitness are important health indicators that support optimal physical functioning. Understanding the relationship between body mass index and these health markers may contribute to the development of evidence-based interventions to address obesity-related complications. The relationship between body mass index, cardiorespiratory and musculoskeletal fitness has not been well explored, particularly in female adolescents. The aim of this study was to investigate the association between body mass index, cardiorespiratory and musculoskeletal fitness among South African adolescent girls in low-income communities. Methods : This cross-sectional study included 151 adolescent girls, aged 13⁻16 years. Cardiorespiratory fitness was measured using the 20 m shuttle run test and musculoskeletal fitness was assessed using a variety of field-based tests. Height and weight were measured with standardised procedures and body mass index (BMI) was derived by the formula [BMI = weight (kg)/height (m)²]. Participants were categorised into three BMI groups using the International Obesity Task Force age- and gender-specific cut-off points. Pearson correlations were used to determine the association between body mass index, cardiorespiratory fitness and measures of musculoskeletal fitness at p ≤ 0.05. Results : Overweight and obese girls were found to have lower cardiorespiratory fitness, decreased lower extremity muscular strength, greater grip strength, and more hypermobile joints compared to normal-weight peers. BMI was negatively associated with cardiorespiratory fitness and lower extremity muscular strength. Conclusions : The findings indicate that increased body mass correlates with decreased cardiorespiratory and musculoskeletal fitness. Interventions should be developed to target these important components of physical fitness in this demographic group.

Stress Corrosion Evaluation of Nitinol 60 for the International Space Station Water Recycling System

Science.gov (United States)

Torres, P. D.

2016-01-01

A stress corrosion cracking (SCC) evaluation of Nitinol 60 was performed because this alloy is considered a candidate bearing material for the Environmental Control and Life Support System (ECLSS), specifically in the Urine Processing Assembly of the International Space Station. An SCC evaluation that preceded this one during the 2013-2014 timeframe included various alloys: Inconel 625, Hastelloy C-276, titanium (Ti) commercially pure (CP), Ti 6Al-4V, extra-low interstitial (ELI) Ti 6Al-4V, and Cronidur 30. In that evaluation, most specimens were exposed for a year. The results of that evaluation were published in NASA/TM-2015-218206, entitled "Stress Corrosion Evaluation of Various Metallic Materials for the International Space Station Water Recycling System,"1 available at the NASA Scientific and Technical Information program web page: http://www.sti.nasa.gov. Nitinol 60 was added to the test program in 2014.

Autism as the Low-Fitness Extreme of a Parentally Selected Fitness Indicator.

Science.gov (United States)

Shaner, Andrew; Miller, Geoffrey; Mintz, Jim

2008-12-01

Siblings compete for parental care and feeding, while parents must allocate scarce resources to those offspring most likely to survive and reproduce. This could cause offspring to evolve traits that advertise health, and thereby attract parental resources. For example, experimental evidence suggests that bright orange filaments covering the heads of North American coot chicks may have evolved for this fitness-advertising purpose. Could any human mental disorders be the equivalent of dull filaments in coot chicks-low-fitness extremes of mental abilities that evolved as fitness indicators? One possibility is autism. Suppose that the ability of very young children to charm their parents evolved as a parentally selected fitness indicator. Young children would vary greatly in their ability to charm parents, that variation would correlate with underlying fitness, and autism could be the low-fitness extreme of this variation. This view explains many seemingly disparate facts about autism and leads to some surprising and testable predictions.

Replicating the EnhanceFitness physical activity program in Hawai`i's multicultural population, 2007-2010.

Science.gov (United States)

Tomioka, Michiyo; Sugihara, Naomi; Braun, Kathryn L

2012-01-01

Despite evidence of the benefits of regular physical activity, many older adults are not physically active. Health professionals are challenged to replicate evidence-based programs to address low levels of physical activity among members of their communities. EnhanceFitness is an evidence-based group exercise program developed in Seattle to increase the strength, flexibility, and balance of older adults. Hawai`i's Healthy Aging Partnership supported the rural island of Kaua`i to select, adapt, implement, and evaluate EnhanceFitness to increase physical activity among older adult residents (75% Asian/Pacific Islander [API]). Evaluation measures of the replication of EnhanceFitness included fidelity of EnhanceFitness delivery and participants' attendance, satisfaction with the program, confidence to exercise regularly, and pre-post fitness check measures of physical performance (chair stands, arm curls, and the up-and-go test). Between July 2007 and December 2010, 223 Kaua`i residents enrolled in EnhanceFitness; 178 (80%) participated at least 4 months and completed the 4-month fitness checks. EnhanceFitness classes were offered with a high degree of fidelity, and both API and white participants significantly improved their physical performance (chair stands, t = -11.06, P program and instructors and high confidence to continue to exercise regularly. EnhanceFitness is replicable in Hawai`i and increased physical performance among API and white older adults. This case study outlines a replication process that other communities can follow.

Global Fits of the Electroweak Standard Theory: Past, Present and Future

CERN Document Server

Baak, M; Mönig, K

2016-01-01

The last decades have seen tremendous progress in the experimental techniques for measuring key observables of the Standard Theory (ST) as well as in theoretical calculations that has led to highly precise predictions of these observables. Global electroweak fits of the ST compare the precision measurements of electroweak observables from lepton and hadron colliders at CERN and elsewhere with accurate theoretical predictions of the ST calculated at multi-loop level. For a long time, global fits have been used to assess the validity of the ST and to constrain indirectly (by exploiting contributions from quantum loops) the remaining free ST parameters, like the masses of the top quark and Higgs boson before their direct discovery. With the discovery of the Higgs boson at the Large Hadron Collider (LHC), the electroweak sector of the ST is now complete and all fundamental ST parameters are known. Hence the global fits are a powerful tool to probe the internal consistency of the ST, to predict ST parameters with...

Fuzzy Analytic Hierarchy Process-based Chinese Resident Best Fitness Behavior Method Research.

Science.gov (United States)

Wang, Dapeng; Zhang, Lan

2015-01-01

With explosive development in Chinese economy and science and technology, people's pursuit of health becomes more and more intense, therefore Chinese resident sports fitness activities have been rapidly developed. However, different fitness events popularity degrees and effects on body energy consumption are different, so bases on this, the paper researches on fitness behaviors and gets Chinese residents sports fitness behaviors exercise guide, which provides guidance for propelling to national fitness plan's implementation and improving Chinese resident fitness scientization. The paper starts from the perspective of energy consumption, it mainly adopts experience method, determines Chinese resident favorite sports fitness event energy consumption through observing all kinds of fitness behaviors energy consumption, and applies fuzzy analytic hierarchy process to make evaluation on bicycle riding, shadowboxing practicing, swimming, rope skipping, jogging, running, aerobics these seven fitness events. By calculating fuzzy rate model's membership and comparing their sizes, it gets fitness behaviors that are more helpful for resident health, more effective and popular. Finally, it gets conclusions that swimming is a best exercise mode and its membership is the highest. Besides, the memberships of running, rope skipping and shadowboxing practicing are also relative higher. It should go in for bodybuilding by synthesizing above several kinds of fitness events according to different physical conditions; different living conditions so that can better achieve the purpose of fitness exercises.

Psychological fitness for work: do we still have a long way to go?

Directory of Open Access Journals (Sweden)

Giuseppe Ferrari

2016-07-01

Full Text Available In Italy, the absence of adequate regulatory instruments and guidelines for the proper classification of psychiatric disorders in occupational medicine denies occupational physicians the opportunity to adequately evaluate employees’ psycho-physical fitness for work through health surveillance. This applies particularly to the categories of workers who could potentially ‘endanger’ the health and safety of third parties in the workplace. Although each business organization tries to internally manage these cases, there is an increasingly need to have a common reference framework. It is becoming increasingly urgent that both legal experts and scientific researchers address this issue together to define the psychological requirements necessary for the performance of given activities according to the nosological classification of psychiatric disorders from the DSM-5; this will protect the health and safety of both the workers and third parties.

The linear sizes tolerances and fits system modernization

Science.gov (United States)

Glukhov, V. I.; Grinevich, V. A.; Shalay, V. V.

2018-04-01

The study is carried out on the urgent topic for technical products quality providing in the tolerancing process of the component parts. The aim of the paper is to develop alternatives for improving the system linear sizes tolerances and dimensional fits in the international standard ISO 286-1. The tasks of the work are, firstly, to classify as linear sizes the elements additionally linear coordinating sizes that determine the detail elements location and, secondly, to justify the basic deviation of the tolerance interval for the element's linear size. The geometrical modeling method of real details elements, the analytical and experimental methods are used in the research. It is shown that the linear coordinates are the dimensional basis of the elements linear sizes. To standardize the accuracy of linear coordinating sizes in all accuracy classes, it is sufficient to select in the standardized tolerance system only one tolerance interval with symmetrical deviations: Js for internal dimensional elements (holes) and js for external elements (shafts). The main deviation of this coordinating tolerance is the average zero deviation, which coincides with the nominal value of the coordinating size. Other intervals of the tolerance system are remained for normalizing the accuracy of the elements linear sizes with a fundamental change in the basic deviation of all tolerance intervals is the maximum deviation corresponding to the limit of the element material: EI is the lower tolerance for the of the internal elements (holes) sizes and es is the upper tolerance deviation for the outer elements (shafts) sizes. It is the sizes of the material maximum that are involved in the of the dimensional elements mating of the shafts and holes and determine the fits type.

Comparing internal and external drivers in the southern Benguela ...

African Journals Online (AJOL)

Comparing internal and external drivers in the southern Benguela and the southern and ... during the model fitting: internal forcing by means of the trophic flow controls ... and two kinds of external forcing, namely fishing and the environment.

Effectiveness of three just-in-time training modalities for N-95 mask fit testing.

Science.gov (United States)

Jones, David; Stoler, Genevieve; Suyama, Joe

2013-01-01

To compare and contrast three different training modalities for fit testing N-95 respirator face masks. Block randomized interventional study. Urban university. Two hundred eighty-nine medical students. Students were randomly assigned to video, lecture, or slide show to evaluate the effectiveness of the methods for fit testing large groups of people. Ease of fit and success of fit for each instructional technique. Mask 1 was a Kimberly-Clark duckbill N-95 respirator mask, and mask 2 was a 3M™ carpenters N-95 respirator mask. "Ease of fit" was defined as the ability to successfully don a mask in less than 30 seconds. "Success of fit" was defined as the ability to correctly don a mask in one try. There were no statistical differences by training modality for either mask regarding ease of fit or success of fit. There were no differences among video presentation, small group demonstration, and self-directed slide show just-in-time training modalities for ease of fit or success of fit N-95 respirator mask fitting. Further study is needed to explore more effective fit training modalities.

Cardiorespiratory fitness and physical activity level in adolescents

Directory of Open Access Journals (Sweden)

Viviane Schultz Straatmann

2014-12-01

Full Text Available DOI: http://dx.doi.org/10.5007/1980-0037.2015v17n1p21   More objective methods to detect inactive adolescents may help identify young people that are vulnerable to obesity and other chronic diseases. The objective of this study was to examine the association between classifications obtained with the cardiorespiratory fitness test and physical activity level in adolescents, as well as the agreement between tertiles and z-score distribution of the variables generated with these methods (distance covered and total physical activity score. A cross-sectional study was conducted using a random sample of 639 adolescents (61% girls aged 12 to 19 years (mean age of 16 ± 1.8 and categorized into two age groups: 12-13 and 14-19 years, from public schools in Niterói, Rio de Janeiro, Brazil. Cardiorespiratory fitness was assessed by a 9-min run/walk test (T9 and physical activity level by the International Physical Activity Questionnaire (IPAQ. The chi-square test (or Fisher’s exact test and Kruskal-Wallis test were applied for the evaluation of associations, and the weighted kappa coefficient and intraclass correlation coefficient were used to investigate agreement between variables. A level of significance of p<0.05 was adopted. A significant association between the classifications obtained with the two methods was only observed for adolescents aged ≥ 14 years. However, there was agreement between the variables generated with the two methods in both age groups. The median distance covered in the T9 increased according to tertiles of total physical activity score. An association between the classifications obtained with the IPAQ and T9 was only found for older adolescents. However, the continuous variables and variables categorized into tertiles generated with the methods were associated and showed agreement in both age groups.

International intercomparison of neutron spectra evaluating methods using activation detectors

International Nuclear Information System (INIS)

Fischer, A.

1975-06-01

The international intercomparison of neutron spectrum evaluation methods using activation detectors was organized by the IAEA in 1971 - 1972. All of the contributions and the results of a critical evaluation are presented here. The spectra of different contributors are compared to a reference spectrum by means of different integrals and weighting functions. Different cross section sets, foil numbers, energy point systems, guess spectra used by the contributors cause differences in the resulting spectra. The possible ways of separating these effects are also investigated. Suggestions are made for the organization of a new intercomparison on the basis of more uniform input data. (orig.) [de

Getting CSR communication fit

DEFF Research Database (Denmark)

Schmeltz, Line

2017-01-01

Companies experience increasing legal and societal pressure to communicate about their corporate social responsibility (CSR) engagements from a number of different publics. One very important group is that of young consumers who are predicted to be the most important and influential consumer group...... in the near future. From a value- theoretical base, this article empirically explores the role and applicability of ‘fit’ in strategic CSR communication targeted at young consumers. Point of departure is taken in the well-known strategic fit (a logical link between a company’s CSR commitment and its core...... values) and is further developed by introducing two additional fits, the CSR- Consumer fit and the CSR-Consumer-Company fit (Triple Fit). Through a sequential design, the three fits are empirically tested and their potential for meeting young consumers’ expectations for corporate CSR messaging...

Automated ligand fitting by core-fragment fitting and extension into density

International Nuclear Information System (INIS)

Terwilliger, Thomas C.; Klei, Herbert; Adams, Paul D.; Moriarty, Nigel W.; Cohn, Judith D.

2006-01-01

An automated ligand-fitting procedure has been developed and tested on 9327 ligands and (F o − F c )exp(iϕ c ) difference density from macromolecular structures in the Protein Data Bank. A procedure for fitting of ligands to electron-density maps by first fitting a core fragment of the ligand to density and then extending the remainder of the ligand into density is presented. The approach was tested by fitting 9327 ligands over a wide range of resolutions (most are in the range 0.8-4.8 Å) from the Protein Data Bank (PDB) into (F o − F c )exp(iϕ c ) difference density calculated using entries from the PDB without these ligands. The procedure was able to place 58% of these 9327 ligands within 2 Å (r.m.s.d.) of the coordinates of the atoms in the original PDB entry for that ligand. The success of the fitting procedure was relatively insensitive to the size of the ligand in the range 10–100 non-H atoms and was only moderately sensitive to resolution, with the percentage of ligands placed near the coordinates of the original PDB entry for fits in the range 58–73% over all resolution ranges tested

Strengthening Internal Quality Assurance Processes: Facilitating Student Evaluation Committees to Contribute

Science.gov (United States)

Stalmeijer, Renée; Whittingham, Jill; de Grave, Willem; Dolmans, Diana

2016-01-01

Student evaluation committees play a crucial role in internal quality assurance processes as representatives of the student body. However, the students on these committees sometimes experience difficulty in providing constructive and structured feedback to faculty in an environment characterised by a strong power differential between student and…

Cultural, Social, and Economic Capital Constructs in International Assessments: An Evaluation Using Exploratory Structural Equation Modeling

Science.gov (United States)

Caro, Daniel H.; Sandoval-Hernández, Andrés; Lüdtke, Oliver

2014-01-01

The article employs exploratory structural equation modeling (ESEM) to evaluate constructs of economic, cultural, and social capital in international large-scale assessment (LSA) data from the Progress in International Reading Literacy Study (PIRLS) 2006 and the Programme for International Student Assessment (PISA) 2009. ESEM integrates the…

The relationships among child's ability of mastication, dietary behaviour and physical fitness.

Science.gov (United States)

Kibayashi, M

2011-05-01

  To investigate the relationships between the ability of mastication and physical fitness, and between the ability of mastication and dietary behaviour in children, I examined these parameters using the data of sugar elution rate, physical fitness and athletic ability survey and self-administered questionnaire on dietary behaviour on 171 sixth grade children (88 boys and 83 girls). The sugar elution rate was the index of the ability of mastication and was evaluated by the chewing gum method. The results of self-administered questionnaire on dietary behaviour were used as an index of dietary behaviour. Physical fitness was evaluated by the physical fitness and athletic ability survey of the Ministry of Education, Culture, Sports, Science and Technology, Japan. Regression analysis revealed that the sugar elution rate had significantly positive correlations with the mean grip strength, sit-up, sit-and-reach, repetition side steps and ball throw. The results of self-administered questionnaire on dietary behaviour revealed that the sugar elution rate was significantly higher in children, who had high expectation of food intake and high frequency of vegetable intake, than those with lower parameters. These results suggest that the ability of mastication correlates with physical fitness and dietary behaviour in children. © 2011 John Wiley & Sons A/S.

Comparison of machine learning techniques to predict all-cause mortality using fitness data: the Henry ford exercIse testing (FIT) project.

Science.gov (United States)

Sakr, Sherif; Elshawi, Radwa; Ahmed, Amjad M; Qureshi, Waqas T; Brawner, Clinton A; Keteyian, Steven J; Blaha, Michael J; Al-Mallah, Mouaz H

2017-12-19

Prior studies have demonstrated that cardiorespiratory fitness (CRF) is a strong marker of cardiovascular health. Machine learning (ML) can enhance the prediction of outcomes through classification techniques that classify the data into predetermined categories. The aim of this study is to present an evaluation and comparison of how machine learning techniques can be applied on medical records of cardiorespiratory fitness and how the various techniques differ in terms of capabilities of predicting medical outcomes (e.g. mortality). We use data of 34,212 patients free of known coronary artery disease or heart failure who underwent clinician-referred exercise treadmill stress testing at Henry Ford Health Systems Between 1991 and 2009 and had a complete 10-year follow-up. Seven machine learning classification techniques were evaluated: Decision Tree (DT), Support Vector Machine (SVM), Artificial Neural Networks (ANN), Naïve Bayesian Classifier (BC), Bayesian Network (BN), K-Nearest Neighbor (KNN) and Random Forest (RF). In order to handle the imbalanced dataset used, the Synthetic Minority Over-Sampling Technique (SMOTE) is used. Two set of experiments have been conducted with and without the SMOTE sampling technique. On average over different evaluation metrics, SVM Classifier has shown the lowest performance while other models like BN, BC and DT performed better. The RF classifier has shown the best performance (AUC = 0.97) among all models trained using the SMOTE sampling. The results show that various ML techniques can significantly vary in terms of its performance for the different evaluation metrics. It is also not necessarily that the more complex the ML model, the more prediction accuracy can be achieved. The prediction performance of all models trained with SMOTE is much better than the performance of models trained without SMOTE. The study shows the potential of machine learning methods for predicting all-cause mortality using cardiorespiratory fitness

Treatment of photon radiation in kinematics fits at future e{sup +}e{sup -} colliders

Energy Technology Data Exchange (ETDEWEB)

Beckmann, M.; List, J. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); List, B. [Hamburg Univ. (Germany). Inst. fuer Experimentalphysik

2010-05-15

Kinematic fitting, where constraints such as energy and momentum conservation are imposed on measured four-vectors of jets and leptons, is an important tool to improve the resolution in high-energy physics experiments. At future e{sup +}e{sup -} colliders, photon radiation parallel to the beam carrying away large amounts of energy and momentum will become a challenge for kinematic fitting. A photon with longitudinal momentum p{sub z,{gamma}} ({eta}) is introduced, which is parametrized such that {eta} follows a normal distribution. In the fit, {eta} is treated as having a measured value of zero, which corresponds to p{sub z,{gamma}}, = 0. As a result, fits with constraints on energy and momentum conservation converge well even in the presence of a highly energetic photon, while the resolution of fits without such a photon is retained. A fully simulated and reconstructed e{sup +}e{sup -}{yields}q anti qq anti q event sample at {radical}(s)=500 GeV is used to investigate the performance of this method under realistic conditions, as expected at the International Linear Collider. (orig.)

Evaluating a federated medical search engine: tailoring the methodology and reporting the evaluation outcomes.

Science.gov (United States)

Saparova, D; Belden, J; Williams, J; Richardson, B; Schuster, K

2014-01-01

Federated medical search engines are health information systems that provide a single access point to different types of information. Their efficiency as clinical decision support tools has been demonstrated through numerous evaluations. Despite their rigor, very few of these studies report holistic evaluations of medical search engines and even fewer base their evaluations on existing evaluation frameworks. To evaluate a federated medical search engine, MedSocket, for its potential net benefits in an established clinical setting. This study applied the Human, Organization, and Technology (HOT-fit) evaluation framework in order to evaluate MedSocket. The hierarchical structure of the HOT-factors allowed for identification of a combination of efficiency metrics. Human fit was evaluated through user satisfaction and patterns of system use; technology fit was evaluated through the measurements of time-on-task and the accuracy of the found answers; and organization fit was evaluated from the perspective of system fit to the existing organizational structure. Evaluations produced mixed results and suggested several opportunities for system improvement. On average, participants were satisfied with MedSocket searches and confident in the accuracy of retrieved answers. However, MedSocket did not meet participants' expectations in terms of download speed, access to information, and relevance of the search results. These mixed results made it necessary to conclude that in the case of MedSocket, technology fit had a significant influence on the human and organization fit. Hence, improving technological capabilities of the system is critical before its net benefits can become noticeable. The HOT-fit evaluation framework was instrumental in tailoring the methodology for conducting a comprehensive evaluation of the search engine. Such multidimensional evaluation of the search engine resulted in recommendations for system improvement.

Assessing fit in Bayesian models for spatial processes

KAUST Repository

Jun, M.; Katzfuss, M.; Hu, J.; Johnson, V. E.

2014-01-01

© 2014 John Wiley & Sons, Ltd. Gaussian random fields are frequently used to model spatial and spatial-temporal data, particularly in geostatistical settings. As much of the attention of the statistics community has been focused on defining and estimating the mean and covariance functions of these processes, little effort has been devoted to developing goodness-of-fit tests to allow users to assess the models' adequacy. We describe a general goodness-of-fit test and related graphical diagnostics for assessing the fit of Bayesian Gaussian process models using pivotal discrepancy measures. Our method is applicable for both regularly and irregularly spaced observation locations on planar and spherical domains. The essential idea behind our method is to evaluate pivotal quantities defined for a realization of a Gaussian random field at parameter values drawn from the posterior distribution. Because the nominal distribution of the resulting pivotal discrepancy measures is known, it is possible to quantitatively assess model fit directly from the output of Markov chain Monte Carlo algorithms used to sample from the posterior distribution on the parameter space. We illustrate our method in a simulation study and in two applications.

Assessing fit in Bayesian models for spatial processes

KAUST Repository

Jun, M.

2014-09-16

© 2014 John Wiley & Sons, Ltd. Gaussian random fields are frequently used to model spatial and spatial-temporal data, particularly in geostatistical settings. As much of the attention of the statistics community has been focused on defining and estimating the mean and covariance functions of these processes, little effort has been devoted to developing goodness-of-fit tests to allow users to assess the models\\' adequacy. We describe a general goodness-of-fit test and related graphical diagnostics for assessing the fit of Bayesian Gaussian process models using pivotal discrepancy measures. Our method is applicable for both regularly and irregularly spaced observation locations on planar and spherical domains. The essential idea behind our method is to evaluate pivotal quantities defined for a realization of a Gaussian random field at parameter values drawn from the posterior distribution. Because the nominal distribution of the resulting pivotal discrepancy measures is known, it is possible to quantitatively assess model fit directly from the output of Markov chain Monte Carlo algorithms used to sample from the posterior distribution on the parameter space. We illustrate our method in a simulation study and in two applications.

Fitting and comparing competing models of the species abundance distribution: assessment and prospect

Directory of Open Access Journals (Sweden)

Thomas J Matthews

2014-06-01

Full Text Available A species abundance distribution (SAD characterises patterns in the commonness and rarity of all species within an ecological community. As such, the SAD provides the theoretical foundation for a number of other biogeographical and macroecological patterns, such as the species–area relationship, as well as being an interesting pattern in its own right. While there has been resurgence in the study of SADs in the last decade, less focus has been placed on methodology in SAD research, and few attempts have been made to synthesise the vast array of methods which have been employed in SAD model evaluation. As such, our review has two aims. First, we provide a general overview of SADs, including descriptions of the commonly used distributions, plotting methods and issues with evaluating SAD models. Second, we review a number of recent advances in SAD model fitting and comparison. We conclude by providing a list of recommendations for fitting and evaluating SAD models. We argue that it is time for SAD studies to move away from many of the traditional methods available for fitting and evaluating models, such as sole reliance on the visual examination of plots, and embrace statistically rigorous techniques. In particular, we recommend the use of both goodness-of-fit tests and model-comparison analyses because each provides unique information which one can use to draw inferences.

Childhood cardiorespiratory fitness, muscular fitness and adult measures of glucose homeostasis.