The law applicable to environmental damage in European private international law

Directory of Open Access Journals (Sweden)

Đundić Petar

2013-01-01

Full Text Available The paper contains an analysis of choice of law rules in the field of non-contractual liability for damage caused to environment in national legislations of European countries as well as in Private International Law of the European Union. Before the adoption of Regulation of the European Parliament and of the Council on the law applicable to non-contractual obligations (Rome II, special choice of law rules for environmental torts existed in a small number of European national legal orders. This is the fact that gives the rule contained in Article 7 of the Rome II Regulation a particular importance. From the Serbian Private International Law perspective, the significance of that provision is highlighted by the fact that the working draft of the new Serbian Private International Law Act has strictly followed the choice of law rule envisaged by the European legislator for environmental damage. For that reason, a significant part of the paper is dedicated to analysis of said rule, to its interpretation and potential problems which its application could create.

Impact of internal variability on projections of Sahel precipitation change

Science.gov (United States)

Monerie, Paul-Arthur; Sanchez-Gomez, Emilia; Pohl, Benjamin; Robson, Jon; Dong, Buwen

2017-11-01

The impact of the increase of greenhouse gases on Sahelian precipitation is very uncertain in both its spatial pattern and magnitude. In particular, the relative importance of internal variability versus external forcings depends on the time horizon considered in the climate projection. In this study we address the respective roles of the internal climate variability versus external forcings on Sahelian precipitation by using the data from the CESM Large Ensemble Project, which consists of a 40 member ensemble performed with the CESM1-CAM5 coupled model for the period 1920-2100. We show that CESM1-CAM5 is able to simulate the mean and interannual variability of Sahel precipitation, and is representative of a CMIP5 ensemble of simulations (i.e. it simulates the same pattern of precipitation change along with equivalent magnitude and seasonal cycle changes as the CMIP5 ensemble mean). However, CESM1-CAM5 underestimates the long-term decadal variability in Sahel precipitation. For short-term (2010-2049) and mid-term (2030-2069) projections the simulated internal variability component is able to obscure the projected impact of the external forcing. For long-term (2060-2099) projections external forcing induced change becomes stronger than simulated internal variability. Precipitation changes are found to be more robust over the central Sahel than over the western Sahel, where climate change effects struggle to emerge. Ten (thirty) members are needed to separate the 10 year averaged forced response from climate internal variability response in the western Sahel for a long-term (short-term) horizon. Over the central Sahel two members (ten members) are needed for a long-term (short-term) horizon.

A Method for treating Damage Related Criteria in Optimal Topology Design of Continuum Structures

DEFF Research Database (Denmark)

Bendsøe, Martin P; Diaz, Alejandro

1997-01-01

In this paper we present a formulation of the well-known structural topology optimization problem that accounts for the presence of loads capable of causing permanent damage to the structure. Damage is represented in the form of an internal variable model which is standard in continuum damage mec...

A Method for treating Damage Related Criteria in Optimal Topology Design of Continuum Structures

DEFF Research Database (Denmark)

Bendsøe, Martin P; Diaz, A.R.

1998-01-01

In this paper we present a formulation of the well-known structural topology optimization problem that accounts for the presence of loads capable of causing permanent damage to the structure. Damage is represented in the form of an internal variable model which is standard in continuum damage mec...

Structural damage detection for in-service highway bridge under operational and environmental variability

Science.gov (United States)

Jin, Chenhao; Li, Jingcheng; Jang, Shinae; Sun, Xiaorong; Christenson, Richard

2015-03-01

Structural health monitoring has drawn significant attention in the past decades with numerous methodologies and applications for civil structural systems. Although many researchers have developed analytical and experimental damage detection algorithms through vibration-based methods, these methods are not widely accepted for practical structural systems because of their sensitivity to uncertain environmental and operational conditions. The primary environmental factor that influences the structural modal properties is temperature. The goal of this article is to analyze the natural frequency-temperature relationships and detect structural damage in the presence of operational and environmental variations using modal-based method. For this purpose, correlations between natural frequency and temperature are analyzed to select proper independent variables and inputs for the multiple linear regression model and neural network model. In order to capture the changes of natural frequency, confidence intervals to detect the damages for both models are generated. A long-term structural health monitoring system was installed on an in-service highway bridge located in Meriden, Connecticut to obtain vibration and environmental data. Experimental testing results show that the variability of measured natural frequencies due to temperature is captured, and the temperature-induced changes in natural frequencies have been considered prior to the establishment of the threshold in the damage warning system. This novel approach is applicable for structural health monitoring system and helpful to assess the performance of the structure for bridge management and maintenance.

Organizing irresponsibility? The (inter)national management of a nuclear accident damages as discursive regime

International Nuclear Information System (INIS)

Topcu, Sezin

2014-01-01

This article analyzes the historical process related to the international organization of responsibilities and the management of the damages in case of a nuclear disaster. The author shows that the political and legal settings on which the discourse of an 'international regime of civil responsibility' (that emerged in the 1960's) relies, have globally aimed at maintaining a 'historical and spectacular gap' between the damages the nuclear operators are taking responsibility for, and the real and extensive damages engendered by a major accident. She argues that the existence of such a 'gap' is inherent to the nuclear sector, that it is a form of government (both of economic affairs and of the public space) which was historically constructed, and that the existence of such a gap is crucial for the survival of the nuclear industry itself. Thus the notion of 'responsibility' in the nuclear sector appears to serve mainly as a discursive regime, as a means to organize not only responsibilities but also irresponsibilities, whatever the geographic scale (national or international) at which they should be managed

Climate change loss and damage. Economic and legal foundations

Energy Technology Data Exchange (ETDEWEB)

Pinninti, Krishna Rao

2014-04-01

This text works to establish essential foundations and guidelines in the current process of providing strategies, mechanisms and resources for mitigating loss and damage from the adverse impacts of climate change and climate variability. This builds on the groundwork done by the UNFCCC and other entities to facilitate the processes at the international level, pursuing a pragmatic approach and the objective specification of relevant frameworks for further actions. The primary goal is the development of integrated approaches to the assessment and reduction of loss and damage due to climate change (including climate variability), encompassing both economic and legal dimensions.

Climate change loss and damage. Economic and legal foundations

International Nuclear Information System (INIS)

Pinninti, Krishna Rao

2014-01-01

This text works to establish essential foundations and guidelines in the current process of providing strategies, mechanisms and resources for mitigating loss and damage from the adverse impacts of climate change and climate variability. This builds on the groundwork done by the UNFCCC and other entities to facilitate the processes at the international level, pursuing a pragmatic approach and the objective specification of relevant frameworks for further actions. The primary goal is the development of integrated approaches to the assessment and reduction of loss and damage due to climate change (including climate variability), encompassing both economic and legal dimensions.

[Damage to cranial and peripheral nerves following patency restoration of the internal carotid artery].

Science.gov (United States)

Myrcha, P; Ciostek, P; Szopiński, P; Noszczyk, W

2001-01-01

The aim of the study was an assessment of the incidence of injury to cranial and peripheral nerves as complication of patency restoration of the internal carotid artery, and analysis of the effect of peripheral nerve injury on the results of carotid patency restoration. From Oct 1987 to Sept 1999 543 procedures were carried out for restoration of patency of the internal carotid artery. After the operation hypoglossus nerve injury was found in 7 cases (1.4%), vagus injury in 9 (1.8%). Signs of exclusively recurrent laryngeal nerve damage were found in 6 cases (1.2%). Glossopharyngeus nerve was damaged in 2 cases (0.4%), transient phrenic nerve palsy as a result of conduction anaesthesia was noted in 2 cases (0.4%). Damage to the transverse cervical nerve was found in 96 cases (60%). In 2 patients (1.2%) lower position of mouth angle was due to section of the mandibular ramus of the facial nerve. In another 2 cases skin sensation disturbances were a consequence of lesion of the auricularis magnus nerve and always they coexisted with signs of transverse cervical nerve damage. damage to the cranial nerves during operation for carotid patency restoration are frequent but mostly they are not connected with any health risks and often they regress spontaneously.

Experimental verification of a progressive damage model for composite laminates based on continuum damage mechanics. M.S. Thesis Final Report

Science.gov (United States)

Coats, Timothy William

1994-01-01

Progressive failure is a crucial concern when using laminated composites in structural design. Therefore the ability to model damage and predict the life of laminated composites is vital. The purpose of this research was to experimentally verify the application of the continuum damage model, a progressive failure theory utilizing continuum damage mechanics, to a toughened material system. Damage due to tension-tension fatigue was documented for the IM7/5260 composite laminates. Crack density and delamination surface area were used to calculate matrix cracking and delamination internal state variables, respectively, to predict stiffness loss. A damage dependent finite element code qualitatively predicted trends in transverse matrix cracking, axial splits and local stress-strain distributions for notched quasi-isotropic laminates. The predictions were similar to the experimental data and it was concluded that the continuum damage model provided a good prediction of stiffness loss while qualitatively predicting damage growth in notched laminates.

Internal variability in a regional climate model over West Africa

Energy Technology Data Exchange (ETDEWEB)

Vanvyve, Emilie; Ypersele, Jean-Pascal van [Universite catholique de Louvain, Institut d' astronomie et de geophysique Georges Lemaitre, Louvain-la-Neuve (Belgium); Hall, Nicholas [Laboratoire d' Etudes en Geophysique et Oceanographie Spatiales/Centre National d' Etudes Spatiales, Toulouse Cedex 9 (France); Messager, Christophe [University of Leeds, Institute for Atmospheric Science, Environment, School of Earth and Environment, Leeds (United Kingdom); Leroux, Stephanie [Universite Joseph Fourier, Laboratoire d' etude des Transferts en Hydrologie et Environnement, BP53, Grenoble Cedex 9 (France)

2008-02-15

Sensitivity studies with regional climate models are often performed on the basis of a few simulations for which the difference is analysed and the statistical significance is often taken for granted. In this study we present some simple measures of the confidence limits for these types of experiments by analysing the internal variability of a regional climate model run over West Africa. Two 1-year long simulations, differing only in their initial conditions, are compared. The difference between the two runs gives a measure of the internal variability of the model and an indication of which timescales are reliable for analysis. The results are analysed for a range of timescales and spatial scales, and quantitative measures of the confidence limits for regional model simulations are diagnosed for a selection of study areas for rainfall, low level temperature and wind. As the averaging period or spatial scale is increased, the signal due to internal variability gets smaller and confidence in the simulations increases. This occurs more rapidly for variations in precipitation, which appear essentially random, than for dynamical variables, which show some organisation on larger scales. (orig.)

A coupled mechanical and chemical damage model for concrete affected by alkali–silica reaction

Energy Technology Data Exchange (ETDEWEB)

Pignatelli, Rossella, E-mail: rossellapignatelli@gmail.com [Department of Civil and Environmental Engineering, Politecnico di Milano, Piazza L. da Vinci 32, 20133 Milano (Italy); Lombardi Ingegneria S.r.l., Via Giotto 36, 20145 Milano (Italy); Comi, Claudia, E-mail: comi@stru.polimi.it [Department of Civil and Environmental Engineering, Politecnico di Milano, Piazza L. da Vinci 32, 20133 Milano (Italy); Monteiro, Paulo J.M., E-mail: monteiro@ce.berkeley.edu [Department of Civil and Environmental Engineering, University of California, Berkeley, CA 94720 (United States)

2013-11-15

To model the complex degradation phenomena occurring in concrete affected by alkali–silica reaction (ASR), we formulate a poro-mechanical model with two isotropic internal variables: the chemical and the mechanical damage. The chemical damage, related to the evolution of the reaction, is caused by the pressure generated by the expanding ASR gel on the solid concrete skeleton. The mechanical damage describes the strength and stiffness degradation induced by the external loads. As suggested by experimental results, degradation due to ASR is considered to be localized around reactive sites. The effect of the degree of saturation and of the temperature on the reaction development is also modeled. The chemical damage evolution is calibrated using the value of the gel pressure estimated by applying the electrical diffuse double-layer theory to experimental values of the surface charge density in ASR gel specimens reported in the literature. The chemo-damage model is first validated by simulating expansion tests on reactive specimens and beams; the coupled chemo-mechanical damage model is then employed to simulate compression and flexure tests results also taken from the literature. -- Highlights: •Concrete degradation due to ASR in variable environmental conditions is modeled. •Two isotropic internal variables – chemical and mechanical damage – are introduced. •The value of the swelling pressure is estimated by the diffuse double layer theory. •A simplified scheme is proposed to relate macro- and microscopic properties. •The chemo-mechanical damage model is validated by simulating tests in literature.

On the Temporal Variability of Low-Mode Internal Tides in the Deep Ocean

Science.gov (United States)

Ray, Richard D.; Zaron, E. D.

2010-01-01

In situ measurements of internal tides are typically characterized by high temporal variability, with strong dependence on stratification, mesoscale eddies, and background currents commonly observed. Thus, it is surprising to find phase-locked internal tides detectable by satellite altimetry. An important question is how much tidal variability is missed by altimetry. We address this question in several ways. We subset the altimetry by season and find only very small changes -- an important exception being internal tides in the South China Sea where we observe strong seasonal dependence. A wavenumber-domain analysis confirms that throughout most of the global ocean there is little temporal variability in altimetric internal-tide signals, at least in the first baroclinic mode, which is the mode that dominates surface elevation. The analysis shows higher order modes to be significantly more variable. The results of this study have important practical implications for the anticipated SWOT wide-swath altimeter mission, for which removal of internal tide signals is critical for observing non-tidal submesoscale phenomena.

The Fifth International Ural seminar. Radiation damage physics of metals and alloys. Abstracts

International Nuclear Information System (INIS)

2003-01-01

Presented are the abstracts of The Fifth International Ural seminar Damage physics of metals and alloys. General problems of radiation damage physics, radiation effect on change of microstucture and the properties of metals and alloys, as well as materials for nuclear and thermonuclear energetics are considered. The themes of reports are the following: correlation effects in cascades of atom-atomic collisions; radiation-induced strengthening critical current density in YBa 2 Cu 3 O 7-x superconductors; conditions of forming and hydrides growth in irradiated zirconium alloys [ru

Internal and external North Atlantic Sector variability in the Kiel climate model

Energy Technology Data Exchange (ETDEWEB)

Latif, Mojib; Park, Wonsun; Ding, Hui; Keenlyside, Noel S. [Leibniz-Inst. fuer Meereswissenschaften, Kiel (Germany)

2009-08-15

The internal and external North Atlantic Sector variability is investigated by means of a multimillennial control run and forced experiments with the Kiel Climate Model (KCM). The internal variability is studied by analyzing the control run. The externally forced variability is investigated in a run with periodic millennial solar forcing and in greenhouse warming experiments with enhanced carbon dioxide concentrations. The surface air temperature (SAT) averaged over the Northern Hemisphere simulated in the control run displays enhanced variability relative to the red background at decadal, centennial, and millennial timescales. Special emphasis is given to the variability of the Meridional Overturning Circulation (MOC). The MOC plays an important role in the generation of internal climate modes. Furthermore, the MOC provides a strong negative feedback on the Northern Hemisphere SAT in both the solar and greenhouse warming experiments, thereby moderating the direct effects of the external forcing in the North Atlantic. The implications of the results for decadal predictability are discussed. (orig.)

A thermomechanical constitutive model for cemented granular materials with quantifiable internal variables. Part I-Theory

Science.gov (United States)

Tengattini, Alessandro; Das, Arghya; Nguyen, Giang D.; Viggiani, Gioacchino; Hall, Stephen A.; Einav, Itai

2014-10-01

This is the first of two papers introducing a novel thermomechanical continuum constitutive model for cemented granular materials. Here, we establish the theoretical foundations of the model, and highlight its novelties. At the limit of no cement, the model is fully consistent with the original Breakage Mechanics model. An essential ingredient of the model is the use of measurable and micro-mechanics based internal variables, describing the evolution of the dominant inelastic processes. This imposes a link between the macroscopic mechanical behavior and the statistically averaged evolution of the microstructure. As a consequence this model requires only a few physically identifiable parameters, including those of the original breakage model and new ones describing the cement: its volume fraction, its critical damage energy and bulk stiffness, and the cohesion.

Numerical study of damage in unsaturated Geological and Engineered barriers

International Nuclear Information System (INIS)

Arson, C.; Gatmiri, B.

2011-01-01

The theoretical framework of a damage model dedicated to non-isothermal unsaturated porous media is presented. The damage variable is a second-order tensor, and the model is formulated in independent state variables. The behavior laws are derived from a postulated expression of Helmholtz free energy. The damaged rigidities are computed by applying the Principle of Equivalent Elastic Energy (PEEE). Internal length parameters are introduced in the expressions of liquid water and vapor conductivities, to account for cracking effects on fluid flows. The damage model has been implemented in Θ-Stock Finite Element program. The mechanical aspect of the damage model is validated by simulating a triaxial compression test on a dry isothermal brittle material. Then, a sophisticated model of nuclear waste disposal, involving two non-isothermal unsaturated porous media, is reproduced. The results obtained in elasticity are in good agreement with the results presented in the corresponding reference article. A parametric study on initial damage is then performed to assess the influence of the Excavated Damaged Zone (EDZ) on the response of the nuclear waste repository during the heating phase. The trends meet the theoretical expectations. (authors)

A new model for anisotropic damage in concrete and its application to the prediction of failure of some containment vessel

International Nuclear Information System (INIS)

Badel, P.-B.; Godard, V.; Leblond, J.-B.

2005-01-01

The aim of this paper is to propose a new model for damage in concrete structures which incorporates such complex features as damage anisotropy and asymmetry between tension and compression, while being expressed in a format well suited for numerical applications and involving a limited number of material parameters which can be determined from standard experiments. A crude version of the model involving a single tonsorial internal variable representing damage in tension, and a single material parameter, is presented first. The predictions of this simple model are satisfactory in simple tension, but not so in simple compression. As a remedy, various refinements are then introduced in a second version of the model involving an additional tonsorial or scalar internal variable representing damage in compression, and five additional material parameters. An example of determination of the model parameters using experimental stress-strain curves in simple tension and compression, plus failure envelopes in biaxial tension/compression, is presented next. The model is finally applied to the numerical prediction of the failure of some containment vessel subjected to some large internal pressure, with a comparison with calculations based on a simpler isotropic variant of the model using a single scalar damage variable. The results illustrate the relevance of models incorporating both asymmetry between tension and compression and anisotropy of damage for simulations of industrial concrete structures. (authors)

On the derivation of thermodynamic restrictions for materials with internal state variables

International Nuclear Information System (INIS)

Malmberg, T.

1987-07-01

Thermodynamic restrictions for the constitutive relations of an internal variable model are derived by evaluating the Clausius-Duhem entropy inequality with two different approaches. The classical Coleman-Noll argumentation of Rational Thermodynamics applied by Coleman and Gurtin to an internal variable model is summarized. This approach requires an arbitrary modulation of body forces and heat supply in the interior of the body which is subject to criticism. The second approach applied in this presentation is patterned after a concept of Mueller and Liu, originally developed within the context of a different entropy inequality and different classes of constitutive models. For the internal variable model the second approach requires only the modulation of initial values on the boundary of the body. In the course of the development of the second approach certain differences to the argumentation of Mueller and Liu become evident and are pointed out. Finally, the results demonstrate that the first and second approach give the same thermodynamic restrictions for the internal variable model. The derived residual entropy inequality requires further analysis. (orig.) [de

Analysis of core damage frequency: Surry, Unit 1 internal events

International Nuclear Information System (INIS)

Bertucio, R.C.; Julius, J.A.; Cramond, W.R.

1990-04-01

This document contains the accident sequence analysis of internally initiated events for the Surry Nuclear Station, Unit 1. This is one of the five plant analyses conducted as part of the NUREG-1150 effort by the Nuclear Regulatory Commission. NUREG-1150 documents the risk of a selected group of nuclear power plants. The work performed and described here is an extensive of that published in November 1986 as NUREG/CR-4450, Volume 3. It addresses comments form numerous reviewers and significant changes to the plant systems and procedures made since the first report. The uncertainty analysis and presentation of results are also much improved. The context and detail of this report are directed toward PRA practitioners who need to know how the work was performed and the details for use in further studies. The mean core damage frequency at Surry was calculated to be 4.05-E-5 per year, with a 95% upper bound of 1.34E-4 and 5% lower bound of 6.8E-6 per year. Station blackout type accidents (loss of all AC power) were the largest contributors to the core damage frequency, accounting for approximately 68% of the total. The next type of dominant contributors were Loss of Coolant Accidents (LOCAs). These sequences account for 15% of core damage frequency. No other type of sequence accounts for more than 10% of core damage frequency. 49 refs., 52 figs., 70 tabs

Damage invariant and high security acquisition of the internal fingerprint using optical coherence tomography

CSIR Research Space (South Africa)

Darlow, Luke N

2016-11-01

Full Text Available representation they offer. Using an emerging fingerprint acquisition technology – optical coherence tomography – to access an internal fingerprint under the skin surface, this paper serves to address two limitations of conventional scanners: fingertip skin damage...

Liability for nuclear damage: an international perspective. Reflections on the revision of the Vienna Convention

Energy Technology Data Exchange (ETDEWEB)

Lopuski, J

1994-12-31

This book deals with deals of the complex issues of liability and compensation for nuclear damage which have been considered in the course of the work of the IAEA concerning the revision of the Vienna Convention on nuclear liability. It presents, in an orderly way, personal reflections of its author based on his experience gathered in years 1989-1992 when participating in this work. Necessarily it contains in some of its parts references to documents of the IAEA Standing Committee on Nuclear Liability; these documents because of their length could not be reproduced. Consequently these parts may not be fully intelligible for those who have not participated in or closely followed the Committee`s work. The IAEA work on liability for nuclear damage was initiated in the wake of the impact made on the world`s public opinion by the Chernobyl incident and its transboundary effects; issues of international state liability and full compensation have been raised. But humanitarian ideas have quickly been confronted with cold calculations of the cost of financial protection for victims and an open unwillingness of some nuclear states has been manifested. After three years of discussions no wide consensus could be reached on some basic issues, such as: relationship between international state and civil liability regimes, structure of international legislation, concept of nuclear damage, limits of compensation, role of public funds or jurisdiction. The author presents his approach to these controversial issue, trying to provide at the same time a theoretical outline for the future international legislation on nuclear liability. (author).

Liability for nuclear damage: an international perspective. Reflections on the revision of the Vienna Convention

Energy Technology Data Exchange (ETDEWEB)

Lopuski, J.

1993-12-31

This book deals with deals of the complex issues of liability and compensation for nuclear damage which have been considered in the course of the work of the IAEA concerning the revision of the Vienna Convention on nuclear liability. It presents, in an orderly way, personal reflections of its author based on his experience gathered in years 1989-1992 when participating in this work. Necessarily it contains in some of its parts references to documents of the IAEA Standing Committee on Nuclear Liability; these documents because of their length could not be reproduced. Consequently these parts may not be fully intelligible for those who have not participated in or closely followed the Committee`s work. The IAEA work on liability for nuclear damage was initiated in the wake of the impact made on the world`s public opinion by the Chernobyl incident and its transboundary effects; issues of international state liability and full compensation have been raised. But humanitarian ideas have quickly been confronted with cold calculations of the cost of financial protection for victims and an open unwillingness of some nuclear states has been manifested. After three years of discussions no wide consensus could be reached on some basic issues, such as: relationship between international state and civil liability regimes, structure of international legislation, concept of nuclear damage, limits of compensation, role of public funds or jurisdiction. The author presents his approach to these controversial issue, trying to provide at the same time a theoretical outline for the future international legislation on nuclear liability. (author).

Liability for nuclear damage: an international perspective. Reflections on the revision of the Vienna Convention

International Nuclear Information System (INIS)

Lopuski, J.

1993-01-01

This book deals with deals of the complex issues of liability and compensation for nuclear damage which have been considered in the course of the work of the IAEA concerning the revision of the Vienna Convention on nuclear liability. It presents, in an orderly way, personal reflections of its author based on his experience gathered in years 1989-1992 when participating in this work. Necessarily it contains in some of its parts references to documents of the IAEA Standing Committee on Nuclear Liability; these documents because of their length could not be reproduced. Consequently these parts may not be fully intelligible for those who have not participated in or closely followed the Committee's work. The IAEA work on liability for nuclear damage was initiated in the wake of the impact made on the world's public opinion by the Chernobyl incident and its transboundary effects; issues of international state liability and full compensation have been raised. But humanitarian ideas have quickly been confronted with cold calculations of the cost of financial protection for victims and an open unwillingness of some nuclear states has been manifested. After three years of discussions no wide consensus could be reached on some basic issues, such as: relationship between international state and civil liability regimes, structure of international legislation, concept of nuclear damage, limits of compensation, role of public funds or jurisdiction. The author presents his approach to these controversial issue, trying to provide at the same time a theoretical outline for the future international legislation on nuclear liability. (author)

Theoretical and numerical study of thermo-hydro-mechanical damage in unsaturated porous media

International Nuclear Information System (INIS)

Arson, Ch.

2009-09-01

Nuclear waste disposals are designed in multi-phase porous media. A new damage model, formulated in independent state variables (net stress, suction and thermal stress), is proposed for such geo-materials. The damage variable is a second-order tensor, which principal values grow with tensile strains. The stress/strain relations are derived from a postulated expression of the free energy. The degraded rigidities are computed by applying the Principle of Equivalent Elastic Energy for each stress state variable. Cracking effects are taken into account in transfers by introducing internal length parameters in the expressions of moisture conductivities. The damage model has been implemented in Θ-Stock Finite Element code. The mechanical model has been validated by comparing numerical results to experimental data and theoretical predictions. The qualitative evolutions given by the model in the parametric studies performed on realistic complex configurations show good trends. (author)

A Thermodynamical Theory with Internal Variables Describing Thermal Effects in Viscous Fluids

Science.gov (United States)

Ciancio, Vincenzo; Palumbo, Annunziata

2018-04-01

In this paper the heat conduction in viscous fluids is described by using the theory of classical irreversible thermodynamics with internal variables. In this theory, the deviation from the local equilibrium is characterized by vectorial internal variables and a generalized entropy current density expressed in terms of so-called current multipliers. Cross effects between heat conduction and viscosity are also considered and some phenomenological generalizations of Fourier's and Newton's laws are obtained.

Assessing the role of internal climate variability in Antarctica's contribution to future sea-level rise

Science.gov (United States)

Tsai, C. Y.; Forest, C. E.; Pollard, D.

2017-12-01

The Antarctic ice sheet (AIS) has the potential to be a major contributor to future sea-level rise (SLR). Current projections of SLR due to AIS mass loss remain highly uncertain. Better understanding of how ice sheets respond to future climate forcing and variability is essential for assessing the long-term risk of SLR. However, the predictability of future climate is limited by uncertainties from emission scenarios, model structural differences, and the internal variability that is inherently generated within the fully coupled climate system. Among those uncertainties, the impact of internal variability on the AIS changes has not been explicitly assessed. In this study, we quantify the effect of internal variability on the AIS evolutions by using climate fields from two large-ensemble experiments using the Community Earth System Model to force a three-dimensional ice sheet model. We find that internal variability of climate fields, particularly atmospheric fields, among ensemble members leads to significantly different AIS responses. Our results show that the internal variability can cause about 80 mm differences of AIS contribution to SLR by 2100 compared to the ensemble-mean contribution of 380-450 mm. Moreover, using ensemble-mean climate fields as the forcing in the ice sheet model does not produce realistic simulations of the ice loss. Instead, it significantly delays the onset of retreat of the West Antarctic Ice Sheet for up to 20 years and significantly underestimates the AIS contribution to SLR by 0.07-0.11 m in 2100 and up to 0.34 m in the 2250's. Therefore, because the uncertainty caused by internal variability is irreducible, we seek to highlight a critical need to assess the role of internal variability in projecting the AIS loss over the next few centuries. By quantifying the impact of internal variability on AIS contribution to SLR, policy makers can obtain more robust estimates of SLR and implement suitable adaptation strategies.

Analysis of core damage frequency from internal events: Peach Bottom, Unit 2

International Nuclear Information System (INIS)

Kolaczkowski, A.M.; Lambright, J.A.; Ferrell, W.L.; Cathey, N.G.; Najafi, B.; Harper, F.T.

1986-10-01

This document contains the internal event initiated accident sequence analyses for Peach Bottom, Unit 2; one of the reference plants being examined as part of the NUREG-1150 effort by the Nuclear Regulatory Commission. NUREG-1150 will document the risk of a selected group of nuclear power plants. As part of that work, this report contains the overall core damage frequency estimate for Peach Bottom, Unit 2, and the accompanying plant damage state frequencies. Sensitivity and uncertainty analyses provided additional insights regarding the dominant contributors to the Peach Bottom core damage frequency estimate. The mean core damage frequency at Peach Bottom was calculated to be 8.2E-6. Station blackout type accidents (loss of all ac power) were found to dominate the overall results. Anticipated Transient Without Scram accidents were also found to be non-negligible contributors. The numerical results are largely driven by common mode failure probability estimates and to some extent, human error. Because of significant data and analysis uncertainties in these two areas (important, for instance, to the most dominant scenario in this study), it is recommended that the results of the uncertainty and sensitivity analyses be considered before any actions are taken based on this analysis

Analysis of core damage frequency, Surry, Unit 1 internal events appendices

International Nuclear Information System (INIS)

Bertucio, R.C.; Julius, J.A.; Cramond, W.R.

1990-04-01

This document contains the appendices for the accident sequence analyses of internally initiated events for the Surry Nuclear Station, Unit 1. This is one of the five plant analyses conducted as part of the NUREG-1150 effort by the Nuclear Regulatory Commission. NUREG-1150 documents the risk of a selected group of nuclear power plants. The work performed is an extensive reanalysis of that published in November 1986 as NUREG/CR-4450, Volume 3. It addresses comments from numerous reviewers and significant changes to the plant systems and procedures made since the first report. The uncertainty analysis and presentation of results are also much improved. The context and detail of this report are directed toward PRA practitioners who need to know how the work was performed and the details for use in further studies. The mean core damage frequency at Surry was calculated to be 4.0E-5 per year, with a 95% upper bound of 1.3E-4 and 5% lower bound of 6.8E-6 per year. Station blackout type accidents (loss of all AC power) were the largest contributors to the core damage frequency, accounting for approximately 68% of the total. The next type of dominant contributors were Loss of Coolant Accidents (LOCAs). These sequences account for 15% of core damage frequency. No other type of sequence accounts for more than 10% of core damage frequency

Comparison of semen variables, sperm DNA damage and sperm membrane proteins in two male layer breeder lines.

Science.gov (United States)

M, Shanmugam; T R, Kannaki; A, Vinoth

2016-09-01

Semen variables are affected by the breed and strain of chicken. The present study was undertaken to compare the semen quality in two lines of adult chickens with particular reference to sperm chromatin condensation, sperm DNA damage and sperm membrane proteins. Semen from a PD3 and White Leghorn control line was collected at 46 and 47 weeks and 55 weeks of age. The semen was evaluated for gross variables and sperm chromatin condensation by aniline blue staining. Sperm DNA damage was assessed by using the comet assay at 47 weeks of age and sperm membrane proteins were assessed at 55 weeks of age. The duration of fertility was studied by inseminating 100 million sperm once into the hens of the same line as well as another line. The eggs were collected after insemination for 15days and incubated. The eggs were candled on 18th day of incubation for observing embryonic development. The White Leghorn control line had a greater sperm concentration and lesser percentage of morphologically abnormal sperm at the different ages where assessments occurred. There was no difference in sperm chromatin condensation, DNA damage and membrane proteins between the lines. Only low molecular weight protein bands of less than 95kDa were observed in samples of both lines. The line from which semen was used had no effect on the duration over which fertility was sustained after insemination either when used in the same line or another line. Thus, from the results of the present study it may be concluded that there was a difference in gross semen variables between the lines that were studied, however, the sperm chromatin condensation, DNA damage, membrane proteins and duration over which fertility was sustained after insemination did not differ between the lines. Copyright © 2016 Elsevier B.V. All rights reserved.

A preventive maintenance model for leased equipment subject to internal degradation and external shock damage

International Nuclear Information System (INIS)

Zhou, Xiaojun; Wu, Changjie; Li, Yanting; Xi, Lifeng

2016-01-01

A periodic preventive maintenance modeling method is proposed for leased equipment with continuous internal degradation and stochastic external shock damage considered simultaneously, which can facilitate the equipment lessor to optimize the maintenance schedule for the same kind of equipment rented by different lessees. A novel interactive mechanism between the continuous internal degradation and the stochastic external shock damage is established on the hazard rate of the equipment with integrating the imperfect effect of maintenance. Two improvement factors are defined for the modeling of imperfect maintenance. The number of failures resulting from internal degradation and from external shocks are both mathematically deduced based on this interactive mechanism. The optimal preventive maintenance scheme is obtained by minimizing the cumulative maintenance cost throughout the lease period. Numerical example shows that the proposed preventive maintenance model not only can reflect the reliability status of the equipment but also can clearly distinguish between the impact from internal degradation and that from external shocks. - Highlights: • We propose an imperfect periodic preventive maintenance model for leased equipment. • It can distinguish between the impact from internal degradation and that from external shocks. • An internal–external interactive mechanism is proposed. • Two improvement factors are introduced into the modeling of imperfect maintenance. • The model is helpful for the PM scheduling of the same equipment rented by different lessees.

PREFACE: 11th International Conference on Damage Assessment of Structures (DAMAS 2015)

Science.gov (United States)

Wahab, M. A.

2015-07-01

This volume contains the proceedings of the 11th International Conference on Damage Assessment of Structures (DAMAS) 2015. DAMAS has a long history of almost 20 years. The first DAMAS conference took place in 1995 (Pescara, Italy), followed by a biannual meeting in 1997 (Sheffield, UK), 1999 (Dublin, Ireland), 2001 (Cardiff, UK), 2003 (Southampton, UK), 2005 (Gdansk, Poland), 2007 (Torino, Italy), 2009 (Beijing, China), 2011 (Oxford, UK) and 2013 (Dublin, Ireland). The eleventh edition of DAMAS conference series, DAMAS 2015, is hosted by Ghent University, Belgium, and is held at the congress center Het Pand in Ghent city. Ghent is the capital and the largest city of the East Flanders province of the Flemish region of Belgium. Het Pand is the culture and congress center of Ghent University and is a historical monument. The conference is established as a major international forum for research topics relevant to damage assessment of engineering structures and systems including numerical simulations, signal processing of sensor measurements and theoretical techniques as well as experimental case studies. The presentations of DAMAS 2015 are divided into 6 main sessions, namely 1) Structural Health and Condition Monitoring, 2) Damage in Civil Engineering, 3) Damage in Machineries, 4) Damage in Composite Materials, 5) Sensing and Sensors and 6) Signal Processing. The organising committee is grateful to keynote speakers; Professor Guido De Roeck, Head of Structural Mechanics Division, KULeuven, Belgium, for his keynote lecture entitled 'Structural Health Monitoring: highlights and challenges', Professor Weidong Zhu, Department of Mechanical Engineering, University of Maryland, USA, for his keynote lecture entitled 'Vibration-based Structural Damage Detection: Theory and Applications' and Professor Wieslaw Ostachowicz, Head of the Laboratory of Active Materials and Smart Structures, Polish Academy of Sciences, Poland, for his keynote lecture entitled 'Damage Assessment and

The role of internal climate variability for interpreting climate change scenarios

Science.gov (United States)

Maraun, Douglas

2013-04-01

When communicating information on climate change, the use of multi-model ensembles has been advocated to sample uncertainties over a range as wide as possible. To meet the demand for easily accessible results, the ensemble is often summarised by its multi-model mean signal. In rare cases, additional uncertainty measures are given to avoid loosing all information on the ensemble spread, e.g., the highest and lowest projected values. Such approaches, however, disregard the fundamentally different nature of the different types of uncertainties and might cause wrong interpretations and subsequently wrong decisions for adaptation. Whereas scenario and climate model uncertainties are of epistemic nature, i.e., caused by an in principle reducible lack of knowledge, uncertainties due to internal climate variability are aleatory, i.e., inherently stochastic and irreducible. As wisely stated in the proverb "climate is what you expect, weather is what you get", a specific region will experience one stochastic realisation of the climate system, but never exactly the expected climate change signal as given by a multi model mean. Depending on the meteorological variable, region and lead time, the signal might be strong or weak compared to the stochastic component. In cases of a low signal-to-noise ratio, even if the climate change signal is a well defined trend, no trends or even opposite trends might be experienced. Here I propose to use the time of emergence (TOE) to quantify and communicate when climate change trends will exceed the internal variability. The TOE provides a useful measure for end users to assess the time horizon for implementing adaptation measures. Furthermore, internal variability is scale dependent - the more local the scale, the stronger the influence of internal climate variability. Thus investigating the TOE as a function of spatial scale could help to assess the required spatial scale for implementing adaptation measures. I exemplify this proposal with

Current and Future Decadal Trends in the Oceanic Carbon Uptake Are Dominated by Internal Variability

Science.gov (United States)

Li, Hongmei; Ilyina, Tatiana

2018-01-01

We investigate the internal decadal variability of the ocean carbon uptake using 100 ensemble simulations based on the Max Planck Institute Earth system model (MPI-ESM). We find that on decadal time scales, internal variability (ensemble spread) is as large as the forced temporal variability (ensemble mean), and the largest internal variability is found in major carbon sink regions, that is, the 50-65°S band of the Southern Ocean, the North Pacific, and the North Atlantic. The MPI-ESM ensemble produces both positive and negative 10 year trends in the ocean carbon uptake in agreement with observational estimates. Negative decadal trends are projected to occur in the future under RCP4.5 scenario. Due to the large internal variability, the Southern Ocean and the North Pacific require the most ensemble members (more than 53 and 46, respectively) to reproduce the forced decadal trends. This number increases up to 79 in future decades as CO2 emission trajectory changes.

On the role of "internal variability" on soil erosion assessment

Science.gov (United States)

Kim, Jongho; Ivanov, Valeriy; Fatichi, Simone

2017-04-01

Empirical data demonstrate that soil loss is highly non-unique with respect to meteorological or even runoff forcing and its frequency distributions exhibit heavy tails. However, all current erosion assessments do not describe the large associated uncertainties of temporal erosion variability and make unjustified assumptions by relying on central tendencies. Thus, the predictive skill of prognostic models and reliability of national-scale assessments have been repeatedly questioned. In this study, we attempt to reveal that the high variability in soil losses can be attributed to two sources: (1) 'external variability' referring to the uncertainties originating at macro-scale, such as climate, topography, and land use, which has been extensively studied; (2) 'geomorphic internal variability' referring to the micro-scale variations of pedologic properties (e.g., surface erodibility in soils with multi-sized particles), hydrologic properties (e.g., soil structure and degree of saturation), and hydraulic properties (e.g., surface roughness and surface topography). Using data and a physical hydraulic, hydrologic, and erosion and sediment transport model, we show that the geomorphic internal variability summarized by spatio-temporal variability in surface erodibility properties is a considerable source of uncertainty in erosion estimates and represents an overlooked but vital element of geomorphic response. The conclusion is that predictive frameworks of soil erosion should embed stochastic components together with deterministic assessments, if they do not want to largely underestimate uncertainty. Acknowledgement: This study was supported by the Basic Science Research Program of the National Research Foundation of Korea funded by the Ministry of Education (2016R1D1A1B03931886).

Implementation of an anisotropic damage material model using general second order damage tensor

NARCIS (Netherlands)

Niazi, Muhammad Sohail; Mori, K.; Wisselink, H.H.; Pietrzyk, M.; Kusiak, J.; Meinders, Vincent T.; ten Horn, Carel; Majta, J.; Hartley, P.; Lin, J.

2010-01-01

Damage in metals is mainly the process of the initiation and growth of voids. With the growing complexity in materials and forming proc-esses, it becomes inevitable to include anisotropy in damage (tensorial damage variable). Most of the anisotropic damage models define the damage tensor in the

Study on the damage effect of 131I-iodinated oil internal radiation in SMMC-7721 hepatoma model in rat

International Nuclear Information System (INIS)

Wu Shuyan; Zhang Xuguang; Wang Xiangying; Li Su'an; Mao Dihua

2004-01-01

Objective: To investigate the damage effect of 131 I-iodinated oil internal radiation in hepatoma. Methods: SMMC-7721 rat hepatoma model was used to evaluate the damage of 131 I-iodinated oil internal radiation in carcinoma. 131 I-iodinated oil was injected sector-shapely into tumor model of SMMC-7721 hepatoma with arc-needle, matched with routine straight-needle injection. Tumor damage induced by 131 I-iodinated oil intralesion radiation in the carcinoma models are recorded through survival time, weight of rat, local carcinoma, pathology, electron microscopy. Results: Arc-needle injection 131 I-iodinated oil in SMMC-7721 hepatoma at subcutis could increase rat's survival time, the body weight kept less descent, the lumps necrosed wholly. Pathology and ultrastructure detection revealed cell necrosis and collapse, sever nuclear damage was observed in the death cells. The early characteristics of necrosis such as margination of heterochromatin was also found in some tumor cells. Besides, well differentiated tumor cells, degenerative tumor cells and some lymphocytes were seen. Conclusion: Arc-needle injection 131 I-iodinated oil step-by step sector-shapely into tumor is a better method and necrosis is the major effect of 131 I-iodinated oil internal radiation in carcinoma at the level of treated dosage

Firmness at Harvest Impacts Postharvest Fruit Softening and Internal Browning Development in Mechanically Damaged and Non-damaged Highbush Blueberries (Vaccinium corymbosum L.).

Science.gov (United States)

Moggia, Claudia; Graell, Jordi; Lara, Isabel; González, Guillermina; Lobos, Gustavo A

2017-01-01

Fresh blueberries are very susceptible to mechanical damage, which limits postharvest life and firmness. Softening and susceptibility of cultivars "Duke" and "Brigitta" to developing internal browning (IB) after mechanical impact and subsequent storage was evaluated during a 2-year study (2011/2012, 2012/2013). On each season fruit were carefully hand-picked, segregated into soft (<1.60 N), medium (1.61-1.80 N), and firm (1.81-2.00 N) categories, and then either were dropped (32 cm) onto a hard plastic surface or remained non-dropped. All fruit were kept under refrigerated storage (0°C and 85-88% relative humidity) to assess firmness loss and IB after 7, 14, 21, 28, and 35 days. In general, regardless of cultivar or season, high variability in fruit firmness was observed within each commercial harvest, and significant differences in IB and softening rates were found. "Duke" exhibited high softening rates, as well as high and significant r 2 between firmness and IB, but little differences for dropped vs. non-dropped fruit. "Brigitta," having lesser firmness rates, exhibited almost no relationships between firmness and IB (especially for non-dropped fruit), but marked differences between dropping treatments. Firmness loss and IB development were related to firmness at harvest, soft and firm fruit being the most and least damaged, respectively. Soft fruit were characterized by greater IB development during storage along with high soluble solids/acid ratio, which could be used together with firmness to estimate harvest date and storage potential of fruit. Results of this work suggest that the differences in fruit quality traits at harvest could be related to the time that fruit stay on the plant after turning blue, soft fruit being more advanced in maturity. Finally, the observed differences between segregated categories reinforce the importance of analyzing fruit condition for each sorted group separately.

National Assembly report on the bill authorizing joining the 2001 International Convention on Civil Liability for Bunker Oil Pollution Damage

International Nuclear Information System (INIS)

2010-01-01

This report first gives an overview of the progressive implementation of measures and international convention to prevent pollution by ships: the Oilpol convention (Convention for the Prevention of Pollution of the Sea by Oil), the Marpol convention (Marine Pollution), and the different international conventions on liability and compensation (International Convention on Civil Liability for Oil Pollution, International Convention on Liability and Compensation for Damage in Connection with the Carriage of Hazardous and Noxious Substances by Sea, convention on other damages). It also describes the French system to struggle against marine pollution. Then, it presents the main arrangements of the 2001 Convention (liability, mandatory insurance and certificate, and so on), expresses some reserves on the chosen arrangement, and comments the impact of this convention

Executive order no. 433 of 24th May 1996. Executive order on the international fund for compensation for damages caused by oil pollution, 1992

International Nuclear Information System (INIS)

1996-05-01

The Danish executive order on the international fund for the compensation for damages caused by oil pollution, 1992 is related to the Danish law no. 205 of March 29th 1996, and is based on the International Convention on the Establishment of an International Fund for Compensation for Oil Damage, 1992. The document includes the convention's protocol presented in French, Danish and English. (AB)

The cytogenetic damage in gynaecological cancer patients during radiotherapy. The variability of cytogenetic response to irradiation

International Nuclear Information System (INIS)

Vyinnyikov, V.A.; Maznik, N.A.; Sipko, T.C.; Pshenyichna, N.D.

2013-01-01

The limits of cytogenetic changes in blood lymphocytes of gynecological cancer patients undergoing radiotherapy and assessment the individual variability of the kinetics of chromosome aberration yields depending on treatment schemes was evaluated. Cytogenetic study was carried out in 53 female patients with uterine cancer. For the first time in vivo aberration yields were compared in the representational groups of gynecological cancer patients undergoing telegammatherapy, intracavitary brachytherapy or their combination; the limits of cytogenetic changes were evaluated and the magnitude of the individual variability of kinetics of cytogenetic damage yield was assessed depending on the scheme of therapeutic irradiation

Postbuckling Investigations of Piezoelectric Microdevices Considering Damage Effects

Science.gov (United States)

Sun, Zhigang; Wang, Xianqiao

2014-01-01

Piezoelectric material has been emerging as a popular building block in MEMS devices owing to its unique mechanical and electrical material properties. However, the reliability of MEMS devices under buckling deformation environments remains elusive and needs to be further explored. Based on the Talreja's tensor valued internal state damage variables as well as the Helmhotlz free energy of piezoelectric material, a constitutive model of piezoelectric materials with damage is presented. The Kachanvo damage evolution law under in-plane compressive loads is employed. The model is applied to the specific case of the postbuckling analysis of the piezoelectric plate with damage. Then, adopting von Karman's plate theory, the nonlinear governing equations of the piezoelectric plates with initial geometric deflection including damage effects under in-plane compressive loads are established. By using the finite difference method and the Newmark scheme, the damage evolution for damage accumulation is developed and the finite difference procedure for postbuckling equilibrium path is simultaneously employed. Numerical results show the postbuckling behaviors of initial flat and deflected piezoelectric plates with damage or no damage under different sets of electrical loading conditions. The effects of applied voltage, aspect ratio of plate, thick-span ratio of plate, damage as well as initial geometric deflections on the postbuckling behaviors of the piezoelectric plate are discussed. PMID:24618774

Does internal variability change in response to global warming? A large ensemble modelling study of tropical rainfall

Science.gov (United States)

Milinski, S.; Bader, J.; Jungclaus, J. H.; Marotzke, J.

2017-12-01

There is some consensus on mean state changes of rainfall under global warming; changes of the internal variability, on the other hand, are more difficult to analyse and have not been discussed as much despite their importance for understanding changes in extreme events, such as droughts or floodings. We analyse changes in the rainfall variability in the tropical Atlantic region. We use a 100-member ensemble of historical (1850-2005) model simulations with the Max Planck Institute for Meteorology Earth System Model (MPI-ESM1) to identify changes of internal rainfall variability. To investigate the effects of global warming on the internal variability, we employ an additional ensemble of model simulations with stronger external forcing (1% CO2-increase per year, same integration length as the historical simulations) with 68 ensemble members. The focus of our study is on the oceanic Atlantic ITCZ. We find that the internal variability of rainfall over the tropical Atlantic does change due to global warming and that these changes in variability are larger than changes in the mean state in some regions. From splitting the total variance into patterns of variability, we see that the variability on the southern flank of the ITCZ becomes more dominant, i.e. explaining a larger fraction of the total variance in a warmer climate. In agreement with previous studies, we find that changes in the mean state show an increase and narrowing of the ITCZ. The large ensembles allow us to do a statistically robust differentiation between the changes in variability that can be explained by internal variability and those that can be attributed to the external forcing. Furthermore, we argue that internal variability in a transient climate is only well defined in the ensemble domain and not in the temporal domain, which requires the use of a large ensemble.

Central blood pressure variability is increased in hypertensive patients with target organ damage.

Science.gov (United States)

de la Sierra, Alejandro; Pareja, Julia; Yun, Sergi; Acosta, Eva; Aiello, Francesco; Oliveras, Anna; Vázquez, Susana; Armario, Pedro; Blanch, Pedro; Sierra, Cristina; Calero, Francesca; Fernández-Llama, Patricia

2018-02-01

We aimed to evaluate the association of aortic and brachial short-term blood pressure variability (BPV) with the presence of target organ damage (TOD) in hypertensive patients. One-hundred seventy-eight patients, aged 57 ± 12 years, 33% women were studied. TOD was defined by the presence of left ventricular hypertrophy on echocardiogram, microalbuminuria, reduced glomerular filtration rate, or increased aortic pulse wave velocity. Aortic and brachial BPV was assessed by 24-hour ambulatory BP monitoring (Mobil-O-Graph). TOD was present in 92 patients (51.7%). Compared to those without evidence of TOD, they had increased night-to-day ratios of systolic and diastolic BP (both aortic and brachial) and heart rate. They also had significant increased systolic BPV, as measured by both aortic and brachial daytime and 24-hours standard deviations and coefficients of variation, as well as for average real variability. Circadian patterns and short-term variability measures were very similar for aortic and brachial BP. We conclude that BPV is increased in hypertensive-related TOD. Aortic BPV does not add relevant information in comparison to brachial BPV. ©2018 Wiley Periodicals, Inc.

Tree-based flood damage modeling of companies: Damage processes and model performance

Science.gov (United States)

Sieg, Tobias; Vogel, Kristin; Merz, Bruno; Kreibich, Heidi

2017-07-01

Reliable flood risk analyses, including the estimation of damage, are an important prerequisite for efficient risk management. However, not much is known about flood damage processes affecting companies. Thus, we conduct a flood damage assessment of companies in Germany with regard to two aspects. First, we identify relevant damage-influencing variables. Second, we assess the prediction performance of the developed damage models with respect to the gain by using an increasing amount of training data and a sector-specific evaluation of the data. Random forests are trained with data from two postevent surveys after flood events occurring in the years 2002 and 2013. For a sector-specific consideration, the data set is split into four subsets corresponding to the manufacturing, commercial, financial, and service sectors. Further, separate models are derived for three different company assets: buildings, equipment, and goods and stock. Calculated variable importance values reveal different variable sets relevant for the damage estimation, indicating significant differences in the damage process for various company sectors and assets. With an increasing number of data used to build the models, prediction errors decrease. Yet the effect is rather small and seems to saturate for a data set size of several hundred observations. In contrast, the prediction improvement achieved by a sector-specific consideration is more distinct, especially for damage to equipment and goods and stock. Consequently, sector-specific data acquisition and a consideration of sector-specific company characteristics in future flood damage assessments is expected to improve the model performance more than a mere increase in data.

Uncertainties in Future Regional Sea Level Trends: How to Deal with the Internal Climate Variability?

Science.gov (United States)

Becker, M.; Karpytchev, M.; Hu, A.; Deser, C.; Lennartz-Sassinek, S.

2017-12-01

Today, the Climate models (CM) are the main tools for forecasting sea level rise (SLR) at global and regional scales. The CM forecasts are accompanied by inherent uncertainties. Understanding and reducing these uncertainties is becoming a matter of increasing urgency in order to provide robust estimates of SLR impact on coastal societies, which need sustainable choices of climate adaptation strategy. These CM uncertainties are linked to structural model formulation, initial conditions, emission scenario and internal variability. The internal variability is due to complex non-linear interactions within the Earth Climate System and can induce diverse quasi-periodic oscillatory modes and long-term persistences. To quantify the effects of internal variability, most studies used multi-model ensembles or sea level projections from a single model ran with perturbed initial conditions. However, large ensembles are not generally available, or too small, and computationally expensive. In this study, we use a power-law scaling of sea level fluctuations, as observed in many other geophysical signals and natural systems, which can be used to characterize the internal climate variability. From this specific statistical framework, we (1) use the pre-industrial control run of the National Center for Atmospheric Research Community Climate System Model (NCAR-CCSM) to test the robustness of the power-law scaling hypothesis; (2) employ the power-law statistics as a tool for assessing the spread of regional sea level projections due to the internal climate variability for the 21st century NCAR-CCSM; (3) compare the uncertainties in predicted sea level changes obtained from a NCAR-CCSM multi-member ensemble simulations with estimates derived for power-law processes, and (4) explore the sensitivity of spatial patterns of the internal variability and its effects on regional sea level projections.

Independent association of glucocorticoids with damage accrual in SLE.

Science.gov (United States)

Apostolopoulos, Diane; Kandane-Rathnayake, Rangi; Raghunath, Sudha; Hoi, Alberta; Nikpour, Mandana; Morand, Eric F

2016-01-01

To determine factors associated with damage accrual in a prospective cohort of patients with SLE. Patients with SLE who attended the Lupus Clinic at Monash Health, Australia, between 2007 and 2013 were studied. Clinical variables included disease activity (Systemic Lupus Erythematosus Disease Activity Index-2K, SLEDAI-2K), time-adjusted mean SLEDAI, cumulative glucocorticoid dose and organ damage (Systemic Lupus International Collaborating Clinics Damage Index (SDI)). Multivariate logistic regression analyses were performed to identify factors associated with damage accrual. A total of 162 patients were observed over a median (IQR) 3.6 (2.0-4.7) years. Seventy-five per cent (n=121) of patients received glucocorticoids. Damage accrual was significantly more frequent in glucocorticoid-exposed patients (42% vs 15%, p<0.01). Higher glucocorticoid exposure was independently associated with overall damage accrual after controlling for factors including ethnicity and disease activity and was significant at time-adjusted mean doses above 4.42 mg prednisolone/day; the OR of damage accrual in patients in the highest quartile of cumulative glucocorticoid exposure was over 10. Glucocorticoid exposure was independently associated with damage accrual in glucocorticoid-related and non-glucocorticoid related domains of the SDI. Glucocorticoid use is independently associated with the accrual of damage in SLE, including in non-glucocorticoid related domains.

A new model for fatigue damage accumulation of austenitic stainless steel under variable amplitude loading

International Nuclear Information System (INIS)

Taheri, S.; Vincent, L.; Le-Roux, J.C.

2013-01-01

The application of Miner's rule using a loading issued from a mock-up of a RHR system (removal heat system) of PWR plant, made of 304 steel gives a very important non-conservative fatigue life in strain control when strain fatigue curve is used. This result is due to the absence of sequence effect in Miner's rule. Many non linear damage accumulation models have been proposed to get a sequence effect. Shortcomings of some non linear damage accumulation models are discussed. So Smith-Watson-Topper and Fatemi-Socie criterions with a linear damage accumulation rule are then applied to experimental data. A major issue is the need for an elastic-plastic constitutive law which is difficult to propose in the presence of high cycle secondary hardening observed in austenitic stainless steels. A conservative model for fatigue damage accumulation under variable amplitude loading is then proposed for austenitic stainless steels in strain control, which does not need a constitutive law, but takes into account plasticity through cyclic strain stress curve. The model uses a linear damage accumulation rule. This model is based on the fact that for stainless steels, pre-hardening is detrimental for fatigue life in strain control, while it is beneficial in stress control. In the presence of low mean stress, the model is approved based on a large number of tests. Moreover the model allows to explain the larger detrimental effect of a tension mean stress in strain control tests than in stress control tests. (authors)

Forcing, feedback and internal variability in global temperature trends.

Science.gov (United States)

Marotzke, Jochem; Forster, Piers M

2015-01-29

Most present-generation climate models simulate an increase in global-mean surface temperature (GMST) since 1998, whereas observations suggest a warming hiatus. It is unclear to what extent this mismatch is caused by incorrect model forcing, by incorrect model response to forcing or by random factors. Here we analyse simulations and observations of GMST from 1900 to 2012, and show that the distribution of simulated 15-year trends shows no systematic bias against the observations. Using a multiple regression approach that is physically motivated by surface energy balance, we isolate the impact of radiative forcing, climate feedback and ocean heat uptake on GMST--with the regression residual interpreted as internal variability--and assess all possible 15- and 62-year trends. The differences between simulated and observed trends are dominated by random internal variability over the shorter timescale and by variations in the radiative forcings used to drive models over the longer timescale. For either trend length, spread in simulated climate feedback leaves no traceable imprint on GMST trends or, consequently, on the difference between simulations and observations. The claim that climate models systematically overestimate the response to radiative forcing from increasing greenhouse gas concentrations therefore seems to be unfounded.

Adhesion and internalization differences of COM nanocrystals on Vero cells before and after cell damage

Energy Technology Data Exchange (ETDEWEB)

Gan, Qiong-Zhi; Sun, Xin-Yuan; Ouyang, Jian-Ming, E-mail: toyjm@jnu.edu.cn

2016-02-01

The adhesion and internalization between African green monkey kidney epithelial (Vero) cells (before and after oxidative damage by hydrogen peroxide) and calcium oxalate monohydrate (COM) nanocrystals (97 ± 35 nm) were investigated so as to discuss the molecular and cellular mechanism of kidney stone formation. Scanning electron microscope (SEM) was used to observe the Vero–COM nanocrystal adhesion; the nanocrystal-cell adhesion was evaluated by measuring the content of malonaldehyde (MDA), the activity of superoxide dismutase (SOD), the expression level of cell surface osteopontin (OPN) and the change of Zeta potential. Confocal microscopy and flow cytometry were used for the observation and quantitative analysis of crystal internalization. In the process of adhesion, the cell viability and the SOD activity declined, the MDA content, Zeta potential, and the OPN expression level increased. The adhesive capacity of injured Vero was obviously stronger than normal cells; in addition the injured cells promoted the aggregation of COM nanocrystals. The capacity of normal cells to internalize crystals was obviously stronger than that of injured cells. Cell injury increased adhesive sites on cell surface, thereby facilitating the aggregation of COM nanocrystals and their attachment, which results in enhanced risk of calcium oxalate stone formation. - Graphical abstract: The adhesion and internalization differences between Vero cells before and after oxidative damage and calcium oxalate monohydrate nanocrystals were comparatively studied. - Highlights: • Adhesion capacity of injured Vero cells was stronger than normal cells. • Internalization capacity of injured Vero cells was weaker than normal cells. • Injured cells promoted the aggregation of COM nanocrystals. • COM adhesion could aggravate cell injury in both normal and injured cells.

Sensitivity of Climate Change Detection and Attribution to the Characterization of Internal Climate Variability

KAUST Repository

Imbers, Jara; Lopez, Ana; Huntingford, Chris; Allen, Myles

2014-01-01

The Intergovernmental Panel on Climate Change's (IPCC) "very likely" statement that anthropogenic emissions are affecting climate is based on a statistical detection and attribution methodology that strongly depends on the characterization of internal climate variability. In this paper, the authors test the robustness of this statement in the case of global mean surface air temperature, under different representations of such variability. The contributions of the different natural and anthropogenic forcings to the global mean surface air temperature response are computed using a box diffusion model. Representations of internal climate variability are explored using simple stochastic models that nevertheless span a representative range of plausible temporal autocorrelation structures, including the short-memory first-order autoregressive [AR(1)] process and the long-memory fractionally differencing process. The authors find that, independently of the representation chosen, the greenhouse gas signal remains statistically significant under the detection model employed in this paper. The results support the robustness of the IPCC detection and attribution statement for global mean temperature change under different characterizations of internal variability, but they also suggest that a wider variety of robustness tests, other than simple comparisons of residual variance, should be performed when dealing with other climate variables and/or different spatial scales. © 2014 American Meteorological Society.

Sensitivity of Climate Change Detection and Attribution to the Characterization of Internal Climate Variability

KAUST Repository

Imbers, Jara

2014-05-01

The Intergovernmental Panel on Climate Change\\'s (IPCC) "very likely" statement that anthropogenic emissions are affecting climate is based on a statistical detection and attribution methodology that strongly depends on the characterization of internal climate variability. In this paper, the authors test the robustness of this statement in the case of global mean surface air temperature, under different representations of such variability. The contributions of the different natural and anthropogenic forcings to the global mean surface air temperature response are computed using a box diffusion model. Representations of internal climate variability are explored using simple stochastic models that nevertheless span a representative range of plausible temporal autocorrelation structures, including the short-memory first-order autoregressive [AR(1)] process and the long-memory fractionally differencing process. The authors find that, independently of the representation chosen, the greenhouse gas signal remains statistically significant under the detection model employed in this paper. The results support the robustness of the IPCC detection and attribution statement for global mean temperature change under different characterizations of internal variability, but they also suggest that a wider variety of robustness tests, other than simple comparisons of residual variance, should be performed when dealing with other climate variables and/or different spatial scales. © 2014 American Meteorological Society.

Blood pressure variability predicts cardiovascular events independently of traditional cardiovascular risk factors and target organ damage

DEFF Research Database (Denmark)

Vishram, Julie K K; Dahlöf, Björn; Devereux, Richard B

2015-01-01

). METHODS: In 8505 patients randomized to losartan vs. atenolol-based treatment in the LIFE study, we tested whether BP variability assessed as SD and range for BP6-24months measured at 6, 12, 18 and 24 months of treatment was associated with target organ damage (TOD) defined by LVH on ECG and urine albumin......BACKGROUND: Assessment of antihypertensive treatment is normally based on the mean value of a number of blood pressure (BP) measurements. However, it is uncertain whether high in-treatment visit-to-visit BP variability may be harmful in hypertensive patients with left ventricular hypertrophy (LVH.......05), but MI was not. CONCLUSION: In LIFE patients, higher in-treatment BP6-24months variability was independently of mean BP6-24months associated with later CEP and stroke, but not with MI or TOD after 24 months....

Materials with memory initial-boundary value problems for constitutive equations with internal variables

CERN Document Server

Alber, Hans-Dieter

1998-01-01

This book contributes to the mathematical theory of systems of differential equations consisting of the partial differential equations resulting from conservation of mass and momentum, and of constitutive equations with internal variables. The investigations are guided by the objective of proving existence and uniqueness, and are based on the idea of transforming the internal variables and the constitutive equations. A larger number of constitutive equations from the engineering sciences are presented. The book is therefore suitable not only for specialists, but also for mathematicians seeking for an introduction in the field, and for engineers with a sound mathematical background.

Internal versus external controls on age variability: Definitions, origins and implications in a changing climate

Science.gov (United States)

Harman, C. J.

2015-12-01

The unsteadiness of stream water age is now well established, but the controls on the age dynamics, and the adequate representation and prediction of those dynamics, are not. A basic distinction can be made between internal variability that arises from changes in the proportions of flow moving through the diverse flow pathways of a hydrologic system, and external variability that arises from the stochasticity of inputs and outputs (such as precipitation and streamflow). In this talk I will show how these two types of age variability can be formally defined and distinguished within the framework of rank StorAge Selection (rSAS) functions. Internal variability implies variations in time in the rSAS function, while external variability does not. This leads naturally to the definition of several modes of internal variability, reflecting generic ways that system flowpaths may be rearranged. This rearrangement may be induced by fluctuations in the system state (such as catchment wetness), or by longer-term changes in catchment structure (such as land use change). One type of change, the 'inverse storage effect' is characterized by an increase in the release of young water from the system in response to an increase in overall system storage. This effect can be seen in many hydrologic settings, and has important implications for the effect of altered hydroclimatic conditions on solute transport through a landscape. External variability, such as increased precipitation, can induce a decrease in mean transit time (and vice versa), but this effect is greatly enhanced if accompanied by an internal shift in flow pathways that increases the relative importance of younger water. These effects will be illustrated using data from field and experimental studies.

24-hour aortic blood pressure variability showed a stronger association with carotid damage than 24-hour brachial blood pressure variability: The SAFAR study.

Science.gov (United States)

Yu, Shikai; Chi, Chen; Protogerou, Athanase D; Safar, Michel E; Blacher, Jacques; Argyris, Antonis A; Nasothimiou, Efthimia G; Sfikakis, Petros P; Papaioannou, Theodore G; Xu, Henry; Zhang, Yi; Xu, Yawei

2018-03-01

We aim to compare 24-hour aortic blood pressure variability (BPV) with brachial BPV in relation to carotid damage as estimated by carotid intima-media thickness (CIMT) and cross-sectional area (CCSA). Four hundred and forty five individuals received brachial and aortic 24-hour ambulatory BP monitoring with a validated device (Mobil-O-Graph). Systolic BPV was estimated by average real variability (ARV) and time-weighted standard deviation (wSD). In multiple logistic regression analysis, CIMT > 900 μm was significantly and independently associated with aortic ARV (OR = 1.38; 95% CI: 1.04-1.84), aortic wSD (OR = 1.65; 95% CI: 1.19-2.29) and brachial ARV (OR = 1.53; 95% CI: 1.07-2.18), but not with brachial wSD. CCSA > 90th percentile was significantly and independently associated with aortic ARV (OR = 1.50; 95% CI: 1.07-2.10) and wSD (OR = 1.70; 95% CI: 1.12-2.56), but not with brachial BPVs. In receiver operator characteristics curve analysis, aortic wSD identified CCSA > 90th percentile better than brachial wSD (AUC: 0.73 vs 0.68, P < .01). In conclusion, aortic 24-hour systolic BPV showed a slightly stronger association with carotid damage than brachial BPV. ©2018 Wiley Periodicals, Inc.

Environmental economic variables - what has been measured until now?

International Nuclear Information System (INIS)

Ahlroth, S.; Palm, V.

2001-01-01

Environmental accounting encompasses a variety of economic variables. They range from production values of different branches of industry, through fiscal instruments such as environmental taxes, and to valuation studies of external effects of the economy. This paper tries to map out the different aspects of variables, and to point out their linkages and uses, viewed from an environmental accounting perspective. Also, the estimated size of the different types of variables is discussed, based mainly on Swedish studies and on a national scale. Included variables are GDP, export and import, environmental taxes, subsidies, environmental costs, remediation costs, environmental damage costs and examples of prevention costs. We will divide the economic variables into four different types: 1. Those that are recorded as the actors payment on the market 2. Those that are part of the government budget 3. Those that serve as a valuation of the costs incurred on society 4. Those that could be invested to prevent environmental damage The size of the different costs will be taken from a variety of studies, mainly Swedish, and be put in relation to GDP or similar. A brief discussion of the Swedish situation as compared to international figures will also be made

Reducing the Risk of Damage to Power Transformers of 110 kV and Above Accompanying Internal Short Circuits

Energy Technology Data Exchange (ETDEWEB)

L’vova, M. M. [JSC “R& D Center at Federal Grid Company of the Unified Power System” (Russian Federation); L’vov, S. Yu. [Presselektro LLC (Russian Federation); Komarov, V. B. [IPCE RAS (Russian Federation); Lyut’ko, E. O. [JSC “R& D Center at Federal Grid Company of the Unified Power System” (Russian Federation); Vdoviko, V. P. [EMA Ltd. (Russian Federation); Demchenko, V. V. [JSC “Boguchanskaya HPP” (Russian Federation); Belyaev, S. G. [PKF Konif Ltd. (Russian Federation); Savel’ev, V. A. [Ivanovo State Power University (Russian Federation); L’vov, M. Yu., E-mail: timashova@nte-power.ru; L’vov, Yu. N. [JSC “R& D Center at Federal Grid Company of the Unified Power System” (Russian Federation)

2015-03-15

Methods of increasing the operating reliability of power transformers, autotransformers and shunting reactors in order to reduce the risk of damage, which accompany internal short circuits and equipment fires and explosions, are considered.

Observations of Local Positive Low Cloud Feedback Patterns and Their Role in Internal Variability and Climate Sensitivity

Science.gov (United States)

Yuan, Tianle; Oreopoulos, Lazaros; Platnick, Steven E.; Meyer, Kerry

2018-05-01

Modeling studies have shown that cloud feedbacks are sensitive to the spatial pattern of sea surface temperature (SST) anomalies, while cloud feedbacks themselves strongly influence the magnitude of SST anomalies. Observational counterparts to such patterned interactions are still needed. Here we show that distinct large-scale patterns of SST and low-cloud cover (LCC) emerge naturally from objective analyses of observations and demonstrate their close coupling in a positive local SST-LCC feedback loop that may be important for both internal variability and climate change. The two patterns that explain the maximum amount of covariance between SST and LCC correspond to the Interdecadal Pacific Oscillation and the Atlantic Multidecadal Oscillation, leading modes of multidecadal internal variability. Spatial patterns and time series of SST and LCC anomalies associated with both modes point to a strong positive local SST-LCC feedback. In many current climate models, our analyses suggest that SST-LCC feedback strength is too weak compared to observations. Modeled local SST-LCC feedback strength affects simulated internal variability so that stronger feedback produces more intense and more realistic patterns of internal variability. To the extent that the physics of the local positive SST-LCC feedback inferred from observed climate variability applies to future greenhouse warming, we anticipate significant amount of delayed warming because of SST-LCC feedback when anthropogenic SST warming eventually overwhelm the effects of internal variability that may mute anthropogenic warming over parts of the ocean. We postulate that many climate models may be underestimating both future warming and the magnitude of modeled internal variability because of their weak SST-LCC feedback.

Hydration level is an internal variable for computing motivation to obtain water rewards in monkeys.

Science.gov (United States)

Minamimoto, Takafumi; Yamada, Hiroshi; Hori, Yukiko; Suhara, Tetsuya

2012-05-01

In the process of motivation to engage in a behavior, valuation of the expected outcome is comprised of not only external variables (i.e., incentives) but also internal variables (i.e., drive). However, the exact neural mechanism that integrates these variables for the computation of motivational value remains unclear. Besides, the signal of physiological needs, which serves as the primary internal variable for this computation, remains to be identified. Concerning fluid rewards, the osmolality level, one of the physiological indices for the level of thirst, may be an internal variable for valuation, since an increase in the osmolality level induces drinking behavior. Here, to examine the relationship between osmolality and the motivational value of a water reward, we repeatedly measured the blood osmolality level, while 2 monkeys continuously performed an instrumental task until they spontaneously stopped. We found that, as the total amount of water earned increased, the osmolality level progressively decreased (i.e., the hydration level increased) in an individual-dependent manner. There was a significant negative correlation between the error rate of the task (the proportion of trials with low motivation) and the osmolality level. We also found that the increase in the error rate with reward accumulation can be well explained by a formula describing the changes in the osmolality level. These results provide a biologically supported computational formula for the motivational value of a water reward that depends on the hydration level, enabling us to identify the neural mechanism that integrates internal and external variables.

Response of ENSO amplitude to global warming in CESM large ensemble: uncertainty due to internal variability

Science.gov (United States)

Zheng, Xiao-Tong; Hui, Chang; Yeh, Sang-Wook

2018-06-01

El Niño-Southern Oscillation (ENSO) is the dominant mode of variability in the coupled ocean-atmospheric system. Future projections of ENSO change under global warming are highly uncertain among models. In this study, the effect of internal variability on ENSO amplitude change in future climate projections is investigated based on a 40-member ensemble from the Community Earth System Model Large Ensemble (CESM-LE) project. A large uncertainty is identified among ensemble members due to internal variability. The inter-member diversity is associated with a zonal dipole pattern of sea surface temperature (SST) change in the mean along the equator, which is similar to the second empirical orthogonal function (EOF) mode of tropical Pacific decadal variability (TPDV) in the unforced control simulation. The uncertainty in CESM-LE is comparable in magnitude to that among models of the Coupled Model Intercomparison Project phase 5 (CMIP5), suggesting the contribution of internal variability to the intermodel uncertainty in ENSO amplitude change. However, the causations between changes in ENSO amplitude and the mean state are distinct between CESM-LE and CMIP5 ensemble. The CESM-LE results indicate that a large ensemble of 15 members is needed to separate the relative contributions to ENSO amplitude change over the twenty-first century between forced response and internal variability.

Damage characterization and modeling of a 7075-T651 aluminum plate

International Nuclear Information System (INIS)

Jordon, J.B.; Horstemeyer, M.F.; Solanki, K.; Bernard, J.D.; Berry, J.T.; Williams, T.N.

2009-01-01

In this paper, the damage-induced anisotropy arising from material microstructure heterogeneities at two different length scales was characterized and modeled for a wrought aluminum alloy. Experiments were performed on a 7075-T651 aluminum alloy plate using sub-standard tensile specimens in three different orientations with respect to the rolling direction. Scanning electron microscopy was employed to characterize the stereology of the final damage state in terms of cracked and or debonded particles. A physically motivated internal state variable continuum model was used to predict fracture by incorporating material microstructural features. The continuum model showed good comparisons to the experimental data by capturing the damage-induced anisotropic material response. Estimations of the mechanical stress-strain response, material damage histories, and final failure were numerically calculated and experimentally validated thus demonstrating that the final failure state was strongly dependent on the constituent particle morphology.

Internal variability of a 3-D ocean model

Directory of Open Access Journals (Sweden)

Bjarne Büchmann

2016-11-01

Full Text Available The Defence Centre for Operational Oceanography runs operational forecasts for the Danish waters. The core setup is a 60-layer baroclinic circulation model based on the General Estuarine Transport Model code. At intervals, the model setup is tuned to improve ‘model skill’ and overall performance. It has been an area of concern that the uncertainty inherent to the stochastical/chaotic nature of the model is unknown. Thus, it is difficult to state with certainty that a particular setup is improved, even if the computed model skill increases. This issue also extends to the cases, where the model is tuned during an iterative process, where model results are fed back to improve model parameters, such as bathymetry.An ensemble of identical model setups with slightly perturbed initial conditions is examined. It is found that the initial perturbation causes the models to deviate from each other exponentially fast, causing differences of several PSUs and several kelvin within a few days of simulation. The ensemble is run for a full year, and the long-term variability of salinity and temperature is found for different regions within the modelled area. Further, the developing time scale is estimated for each region, and great regional differences are found – in both variability and time scale. It is observed that periods with very high ensemble variability are typically short-term and spatially limited events.A particular event is examined in detail to shed light on how the ensemble ‘behaves’ in periods with large internal model variability. It is found that the ensemble does not seem to follow any particular stochastic distribution: both the ensemble variability (standard deviation or range as well as the ensemble distribution within that range seem to vary with time and place. Further, it is observed that a large spatial variability due to mesoscale features does not necessarily correlate to large ensemble variability. These findings bear

Brain signal variability is modulated as a function of internal and external demand in younger and older adults.

Science.gov (United States)

Grady, Cheryl L; Garrett, Douglas D

2018-04-01

Variability in the Blood Oxygen-Level Dependent (BOLD) signal from fMRI is often associated with better cognitive performance and younger age. It has been proposed that neural variability enables flexible responding to uncertainty in a changing environment. However, signal variability reflecting environmental uncertainty may reduce to the extent that a task depends on internally-directed attention and is supported by neural "solutions" that are schematic and relatively stable within each individual. Accordingly, we examined the hypothesis that BOLD variability will be low at rest, higher during internally-directed tasks, and higher still during externally-directed tasks, and that this effect will be reduced with aging. Modulation of BOLD variability across conditions was consistent with these hypotheses, and was associated with faster and more stable behavioral performance in both young and older adults. These data support the idea that brain signal variability may modulate in response to environmental uncertainty, which is presumed to be greater in the external environment than in the internal milieu. Reduced flexibility of signal variability with age may indicate less ability to switch between internal and external brain states. Copyright © 2017 Elsevier Inc. All rights reserved.

A class of constitutive relations with internal variable derivatives: derivation from homogenization and initial value problem

International Nuclear Information System (INIS)

Andrieux, S.; Joussemet, M.; Lorentz, E.

1996-01-01

When they are subjected to excessive loads, some materials may exhibit a softening behaviour resulting from the deterioration of their mechanical properties. To idealize such behaviours, constitutive relations with softening are introduced, for which the size of the domain of reversibility in the stress-space decreases. These models feature a strain localization within the material, in agreement with experiments, but cannot predict the subsequent behaviour because they lead to shear bands the width of which is equal to zero, physically unacceptable and numerically troublesome. It has been proposed in the literature to overcome these difficulties by adding to the list of internal variable the spatial gradients of some of them. This procedure suffers from lack of firm methodological basis. Although, some quantitative justification have been advanced relying on some kind of microscopic analysis. Therefore, we propose to extend the classical (local) models by introducing the internal state variable first gradients. Given local model within the framework of standard generalized materials, consistent homogenization procedure is put forward to derive macroscopic free energy and dissipation potentials. The standard generalized character is preserved, with an extended set of state variables, containing not only the strain and the internal variables but also the internal variable derivatives. Nevertheless, when dealing with the whole structure, the independence between the new state variables is lost. We propose then to generalize the constitutive relations, leading to a new variational principle that ensures the Clausius-Duhem inequality at the structure scale. (authors)

Internal and external variability in regional simulations of the Iberian Peninsula climate over the last millennium

Directory of Open Access Journals (Sweden)

J. J. Gómez-Navarro

2012-01-01

Full Text Available In this study we analyse the role of internal variability in regional climate simulations through a comparison of two regional paleoclimate simulations for the last millennium. They share the same external forcings and model configuration, differing only in the initial condition used to run the driving global model simulation. A comparison of these simulations allows us to study the role of internal variability in climate models at regional scales, and how it affects the long-term evolution of climate variables such as temperature and precipitation. The results indicate that, although temperature is homogeneously sensitive to the effect of external forcings, the evolution of precipitation is more strongly governed by random unpredictable internal dynamics. There are, however, some areas where the role of internal variability is lower than expected, allowing precipitation to respond to the external forcings. In this respect, we explore the underlying physical mechanisms responsible for it. This study identifies areas, depending on the season, in which a direct comparison between model simulations of precipitation and climate reconstructions would be meaningful, but also other areas where good agreement between them should not be expected even if both are perfect.

Homogenization of linear viscoelastic three phase media: internal variable formulation versus full-field computation

International Nuclear Information System (INIS)

Blanc, V.; Barbie, L.; Masson, R.

2011-01-01

Homogenization of linear viscoelastic heterogeneous media is here extended from two phase inclusion-matrix media to three phase inclusion-matrix media. Each phase obeying to a compressible Maxwellian behaviour, this analytic method leads to an equivalent elastic homogenization problem in the Laplace-Carson space. For some particular microstructures, such as the Hashin composite sphere assemblage, an exact solution is obtained. The inversion of the Laplace-Carson transforms of the overall stress-strain behaviour gives in such cases an internal variable formulation. As expected, the number of these internal variables and their evolution laws are modified to take into account the third phase. Moreover, evolution laws of averaged stresses and strains per phase can still be derived for three phase media. Results of this model are compared to full fields computations of representative volume elements using finite element method, for various concentrations and sizes of inclusion. Relaxation and creep test cases are performed in order to compare predictions of the effective response. The internal variable formulation is shown to yield accurate prediction in both cases. (authors)

Study on evolution of internal damage in CFRP in fatigue process; Hiro katei ni okeru CFRP no naibu sonsho no kento

Energy Technology Data Exchange (ETDEWEB)

Tanaka, K. [Nagoya Univ. (Japan); Murakami, S. [Nagoya Univ. (Japan). Faculty of Engineering

1998-05-15

Development of internal damage evolution in plates and thin tubular speciments of CFRP laminates under static and dynamic loadings are discussed by means of Acoustic Emission measurements and micrographical observations. The mechanical behavior of three kinds of speciments, i.e. undamaged laminate plates [+45deg{sub 4}/-45deg{sub 4}]{sub s}, damaged plates [+45deg{sub 4}/-45deg{sub 4}]{sub s} subjected to drop-weight impact and undamaged tubular speciments [ 45deg]{sub 4}, under quasi-static and fatigue loadings is observed first. Then the mechanism of the resulting inelastic behavior and the change in the mechanical properties are discussed in relation to the evolution of internal damage. Finally the distribution and the evolution of matrix crecks and delamination in the sliced section of the speciments are measured quantitatively in several stages of fatigue process. The dependence of damage distribution on the loading condition is elucidated. Namely, in the case of the stress ratio R=-0.25, the growth of damage zone involving the main crack is localized, and the main crack forms large delamination. On the other hand, for the stress ratio R=0, small cracks are distributed sparsely, but the main crack is not observed until the final stage of the fatifue process. 8 refs., 12 figs.

N-Acetyl-L-cysteine protects thyroid cells against DNA damage induced by external and internal irradiation.

Science.gov (United States)

Kurashige, Tomomi; Shimamura, Mika; Nagayama, Yuji

2017-11-01

We evaluated the effect of the antioxidant N-acetyl-L-cysteine (NAC) on the levels of reactive oxygen species (ROS), DNA double strand breaks (DSB) and micronuclei (MN) induced by internal and external irradiation using a rat thyroid cell line PCCL3. In internal irradiation experiments, ROS and DSB levels increased immediately after 131 I addition and then gradually declined, resulting in very high levels of MN at 24 and 48 h. NAC administration both pre- and also post- 131 I addition suppressed ROS, DSB and MN. In external irradiation experiments with a low dose (0.5 Gy), ROS and DSB increased shortly and could be prevented by NAC administration pre-, but not post-irradiation. In contrast, external irradiation with a high dose (5 Gy) increased ROS and DSB in a bimodal way: ROS and DSB levels increased immediately after irradiation, quickly returned to the basal levels and gradually rose again after >24 h. The second phase was in parallel with an increase in 4-hydroxy-2-nonenal. The number of MN induced by the second wave of ROS/DSB elevations was much higher than that by the first peak. In this situation, NAC administered pre- and post-irradiation comparably suppressed MN induced by a delayed ROS elevation. In conclusion, a prolonged ROS increase during internal irradiation and a delayed ROS increase after external irradiation with a high dose caused serious DNA damage, which were efficiently prevented by NAC. Thus, NAC administration even both after internal or external irradiation prevents ROS increase and eventual DNA damage.

The protection against nuclear risks under the international nuclear liability law: the geographical and technical scope of the international conventions on third party liability for nuclear damage

International Nuclear Information System (INIS)

Kissich, S.J.

2001-10-01

This Ph.D.-research deals with the International Conventions on Third Party Liability for Nuclear Damage. In 1960, the Paris Convention was established with the aim of providing a special uniform nuclear third party liability regime for Western Europe. This Convention was supplemented in 1963 by the Brussels Supplementary Convention. Also in 1963, the Vienna Convention, which aimed to establish a world-wide system based on the same principles as the Paris Convention, was adopted. A further Convention was adopted in 1971 to ensure that nuclear third party liability law and not maritime law would apply to carriage of nuclear materials by sea. In 1988, the Paris and Vienna Conventions have been linked by the adoption of a Joint Protocol. In 1997, the process of amending the 1963 Vienna Convention was successfully concluded and a Convention on Supplementary Compensation was adopted. This Ph.D.-research consists of seven chapters: following an introduction, the second chapter gives a general view of the existing international legal sources. The third chapter describes the international civil nuclear liability law concept and its leading principles. The main element of this work is the question of the technical and geographical scope of the international nuclear liability conventions (chapter IV and V). The conventions are only applicable to nuclear incidents, which occur in a nuclear installation or incidental to the carriage or storage of nuclear material. The nuclear damage must arise out of the radioactive properties of nuclear substances which are also defined by legal terms. In addition, the scope of the conventions is limited by the nature of the installations. The geographical scope of application is established by the provisions on geographical coverage. Only the 1963 Vienna Convention does not contain any specific provision dealing with the territorial scope of its application. The geographical scope determines where the nuclear incident or the nuclear damage

A LATIN-based model reduction approach for the simulation of cycling damage

Science.gov (United States)

Bhattacharyya, Mainak; Fau, Amelie; Nackenhorst, Udo; Néron, David; Ladevèze, Pierre

2017-11-01

The objective of this article is to introduce a new method including model order reduction for the life prediction of structures subjected to cycling damage. Contrary to classical incremental schemes for damage computation, a non-incremental technique, the LATIN method, is used herein as a solution framework. This approach allows to introduce a PGD model reduction technique which leads to a drastic reduction of the computational cost. The proposed framework is exemplified for structures subjected to cyclic loading, where damage is considered to be isotropic and micro-defect closure effects are taken into account. A difficulty herein for the use of the LATIN method comes from the state laws which can not be transformed into linear relations through an internal variable transformation. A specific treatment of this issue is introduced in this work.

FAA/NASA International Symposium on Advanced Structural Integrity Methods for Airframe Durability and Damage Tolerance

Energy Technology Data Exchange (ETDEWEB)

Harris, C.E.

1994-09-01

International technical experts in durability and damage tolerance of metallic airframe structures were assembled to present and discuss recent research findings and the development of advanced design and analysis methods, structural concepts, and advanced materials. The symposium focused on the dissemination of new knowledge and the peer-review of progress on the development of advanced methodologies. Papers were presented on: structural concepts for enhanced durability, damage tolerance, and maintainability; new metallic alloys and processing technology; fatigue crack initiation and small crack effects; fatigue crack growth models; fracture mechanics failure, criteria for ductile materials; structural mechanics methodology for residual strength and life prediction; development of flight load spectra for design and testing; and advanced approaches to resist corrosion and environmentally assisted fatigue. Separate abstracts have been indexed for articles from this report.

Identification Of Damages Of Tribological Associations In Crankshaft And Piston Systems Of Two-Stroke Internal Combustion Engines Used As Main Propulsion In Sea-Going Vessels And Proposal Of Probabilistic Description Of Loads As Causes Of These Damages

Directory of Open Access Journals (Sweden)

Girtler Jerzy

2015-04-01

Full Text Available The article discusses damages of essential tribological associations in crankshaft and piston systems of large power two-stroke engines used as main engines, which take place during transport tasks performed by those ships. Difficulties are named which make preventing those damages impossible, despite the fact that the technical state of engines of this type is identified with the aid of complex diagnostic systems making use of advanced computer technology. It is demonstrated that one of causes of the damages is the lack of research activities oriented on recognising random properties of the loads leading to those damages. A proposal is made for the loads acting at a given time t on tribological associations in crankshaft and piston systems of internal combustion engines used as main engines to be considered as random variables Qt. At the same time the loads examined within a given time interval tr ≤ t ≤ tz would be considered stochastic processes {Q(t: t ≥ 0}. Essential properties of the loads of the abovementioned tribological associations are named and explained by formulating hypotheses which need empirical verification. Interval estimation is proposed for estimating the expected value E(Qt of the load Qt acting at time t. A relation is indicated between the mechanical load and the thermal load acting on tribological associations in the ship main engine crankshaft and piston system. A suggestion is formulated that a stochastic form of the relation between these types of load is to be searched for, rather than statistic relation, and a proposal is made to measure the intensity (strength of the stochastic relation using the Czuprow’s convergence coefficient.

Design strategies for the International Space University's variable gravity research facility

Science.gov (United States)

Bailey, Sheila G.; Chiaramonte, Francis P.; Davidian, Kenneth J.

1990-01-01

A variable gravity research facility named 'Newton' was designed by 58 students from 13 countries at the International Space University's 1989 summer session at the Universite Louis Pasteur, Strasbourge, France. The project was comprehensive in scope, including a political and legal foundation for international cooperation, development and financing; technical, science and engineering issues; architectural design; plausible schedules; and operations, crew issues and maintenance. Since log-term exposure to zero gravity is known to be harmful to the human body, the main goal was to design a unique variable gravity research facility which would find a practical solution to this problem, permitting a manned mission to Mars. The facility would not duplicate other space-based facilities and would provide the flexibility for examining a number of gravity levels, including lunar and Martian gravities. Major design alternatives included a truss versus a tether based system which also involved the question of docking while spinning or despinning to dock. These design issues are described. The relative advantages or disadvantages are discussed, including comments on the necessary research and technology development required for each.

VizieR Online Data Catalog: AAVSO International Variable Star Index VSX (Watson+, 2006-2014)

Science.gov (United States)

Watson, C.; Henden, A. A.; Price, A.

2018-05-01

This file contains Galactic stars known or suspected to be variable. It lists all stars that have an entry in the AAVSO International Variable Star Index (VSX; http://www.aavso.org/vsx). The database consisted initially of the General Catalogue of Variable Stars (GCVS) and the New Catalogue of Suspected Variables (NSV) and was then supplemented with a large number of variable star catalogues, as well as individual variable star discoveries or variables found in the literature. Effort has also been invested to update the entries with the latest information regarding position, type and period and to remove duplicates. The VSX database is being continually updated and maintained. For historical reasons some objects outside of the Galaxy have been included. (3 data files).

Uncertainty on Fatigue Damage Accumulation for Composite Materials

DEFF Research Database (Denmark)

Toft, Henrik Stensgaard; Sørensen, John Dalsgaard

2009-01-01

In the present paper stochastic models for fatigue damage accumulation for composite materials are presented based on public available constant and variable amplitude fatigue tests. The methods used for estimating the SN-curve and accumulated fatigue damage are presented.......In the present paper stochastic models for fatigue damage accumulation for composite materials are presented based on public available constant and variable amplitude fatigue tests. The methods used for estimating the SN-curve and accumulated fatigue damage are presented....

Retinal Damage Induced by Internal Limiting Membrane Removal

Directory of Open Access Journals (Sweden)

Rachel Gelman

2015-01-01

Full Text Available The internal limiting membrane (ILM, the basement membrane of the Müller cells, serves as the interface between the vitreous body and the retinal nerve fiber layer. It has a fundamental role in the development, structure, and function of the retina, although it also is a pathologic component in the various vitreoretinal disorders, most notably in macular holes. It was not until understanding of the evolution of idiopathic macular holes and the advent of idiopathic macular hole surgery that the idea of adjuvant ILM peeling in the treatment of tractional maculopathies was explored. Today intentional ILM peeling is a commonly applied surgical technique among vitreoretinal surgeons as it has been found to increase the rate of successful macular hole closure and improve surgical outcomes in other vitreoretinal diseases. Though ILM peeling has refined surgery for tractional maculopathies, like all surgical procedures it is not immune to perioperative risk. The essential role of the ILM to the integrity of the retina and risk of trauma to retinal tissue spurs suspicion with regard to its routine removal. Several authors have investigated the retinal damage induced by ILM peeling and these complications have been manifested across many different diagnostic studies.

NOx emissions from large point sources: variability in ozone production, resulting health damages and economic costs

International Nuclear Information System (INIS)

Mauzerall, D.L.; Namsoug Kim

2005-01-01

We present a proof-of-concept analysis of the measurement of the health damage of ozone (O 3 ) produced from nitrogen oxides (NO x =NO+NO 2 ) emitted by individual large point sources in the eastern United States. We use a regional atmospheric model of the eastern United States, the Comprehensive Air quality Model with Extensions (CAMx), to quantify the variable impact that a fixed quantity of NO x emitted from individual sources can have on the downwind concentration of surface O 3 , depending on temperature and local biogenic hydrocarbon emissions. We also examine the dependence of resulting O 3 -related health damages on the size of the exposed population. The investigation is relevant to the increasingly widely used 'cap and trade' approach to NO x regulation, which presumes that shifts of emission over time and space, holding the total fixed over the course of the summer O 3 season, will have minimal effect on the environmental outcome. By contrast, we show that a shift of a unit of NO x emissions from one place or time to another could result in large changes in resulting health effects due to O 3 formation and exposure. We indicate how the type of modeling carried out here might be used to attach externality-correcting prices to emissions. Charging emitters fees that are commensurate with the damage caused by their NO x emissions would create an incentive for emitters to reduce emissions at times and in locations where they cause the largest damage. (author)

Editorial: Papers from the 7th International Conference on Dendrochronology - Cultural Diversity, Environmental Variability

Science.gov (United States)

Margaret S. Devall; Elaine K. Sutherland

2008-01-01

The 7th International Conference on Dendrochronology - Cultural Diversity, Environmental Variability was held in Beijing, China from 11 to 17 June 2006. The conference was organized and hosted by the Institute of Botany, Chinese Academy of Sciences (IB_CAS) in conjunction with the International Union of Forest Research Organizations (IUFRO) Working Group 5.01.07 (Tree-...

DNA damage in internal organs after cutaneous exposure to sulphur mustard

Energy Technology Data Exchange (ETDEWEB)

Batal, Mohamed [Laboratoire « Lésions des Acides Nucléiques », Université Joseph Fourier – Grenoble 1/CEA/Institut Nanoscience et Cryogénie/SCIB, UMR-E3, Grenoble (France); Département de Toxicologie et Risques Chimiques, Unité de Brûlure Chimique, Institut de Recherche Biomédicale des Armées, Antenne de La Tronche, BP87, F-38702 La Tronche Cedex (France); Boudry, Isabelle; Mouret, Stéphane; Cléry-Barraud, Cécile; Wartelle, Julien [Département de Toxicologie et Risques Chimiques, Unité de Brûlure Chimique, Institut de Recherche Biomédicale des Armées, Antenne de La Tronche, BP87, F-38702 La Tronche Cedex (France); Bérard, Izabel [Laboratoire « Lésions des Acides Nucléiques », Université Joseph Fourier – Grenoble 1/CEA/Institut Nanoscience et Cryogénie/SCIB, UMR-E3, Grenoble (France); Douki, Thierry, E-mail: thierry.douki@cea.fr [Laboratoire « Lésions des Acides Nucléiques », Université Joseph Fourier – Grenoble 1/CEA/Institut Nanoscience et Cryogénie/SCIB, UMR-E3, Grenoble (France)

2014-07-01

Sulphur mustard (SM) is a chemical warfare agent that attacks mainly skin, eye and lungs. Due to its lipophilic properties, SM is also able to diffuse through the skin and reach internal organs. DNA represents one of the most critical molecular targets of this powerful alkylating agent which modifies DNA structure by forming monoadducts and biadducts. These DNA lesions are involved in the acute toxicity of SM as well as its long-term carcinogenicity. In the present work we studied the formation and persistence of guanine and adenine monoadducts and guanine biadducts in the DNA of brain, lungs, kidneys, spleen, and liver of SKH-1 mice cutaneously exposed to 2, 6 and 60 mg/kg of SM. SM-DNA adducts were detected in all studied organs, except in liver at the two lowest doses. Brain and lungs were the organs with the highest level of SM-DNA adducts, followed by kidney, spleen and liver. Monitoring the level of adducts for three weeks after cutaneous exposure showed that the lifetime of adducts were not the same in all organs, lungs being the organ with the longest persistence. Diffusion from skin to internal organs was much more efficient at the highest compared to the lowest dose investigated as the result of the loss of the skin barrier function. These data provide novel information on the distribution of SM in tissues following cutaneous exposures and indicate that brain is an important target. - Highlights: • Sulphur mustard reaches internal organs after skin exposure • Adducts are detected in the DNA of internal organs • Brain is the organ with the highest level of DNA damage • The barrier function of skin is lost at high dose of sulphur mustard • DNA adducts persist in organs for 2 or 3 weeks.

DNA damage in internal organs after cutaneous exposure to sulphur mustard

International Nuclear Information System (INIS)

Batal, Mohamed; Boudry, Isabelle; Mouret, Stéphane; Cléry-Barraud, Cécile; Wartelle, Julien; Bérard, Izabel; Douki, Thierry

2014-01-01

Sulphur mustard (SM) is a chemical warfare agent that attacks mainly skin, eye and lungs. Due to its lipophilic properties, SM is also able to diffuse through the skin and reach internal organs. DNA represents one of the most critical molecular targets of this powerful alkylating agent which modifies DNA structure by forming monoadducts and biadducts. These DNA lesions are involved in the acute toxicity of SM as well as its long-term carcinogenicity. In the present work we studied the formation and persistence of guanine and adenine monoadducts and guanine biadducts in the DNA of brain, lungs, kidneys, spleen, and liver of SKH-1 mice cutaneously exposed to 2, 6 and 60 mg/kg of SM. SM-DNA adducts were detected in all studied organs, except in liver at the two lowest doses. Brain and lungs were the organs with the highest level of SM-DNA adducts, followed by kidney, spleen and liver. Monitoring the level of adducts for three weeks after cutaneous exposure showed that the lifetime of adducts were not the same in all organs, lungs being the organ with the longest persistence. Diffusion from skin to internal organs was much more efficient at the highest compared to the lowest dose investigated as the result of the loss of the skin barrier function. These data provide novel information on the distribution of SM in tissues following cutaneous exposures and indicate that brain is an important target. - Highlights: • Sulphur mustard reaches internal organs after skin exposure • Adducts are detected in the DNA of internal organs • Brain is the organ with the highest level of DNA damage • The barrier function of skin is lost at high dose of sulphur mustard • DNA adducts persist in organs for 2 or 3 weeks

Review of the Shoreham Nuclear Power Station Probabilistic Risk Assessment: internal events and core damage frequency

International Nuclear Information System (INIS)

Ilberg, D.; Shiu, K.; Hanan, N.; Anavim, E.

1985-11-01

A review of the Probabilistic Risk Assessment of the Shoreham Nuclear Power Station was conducted with the broad objective of evaluating its risks in relation to those identified in the Reactor Safety Study (WASH-1400). The scope of the review was limited to the ''front end'' part, i.e., to the evaluation of the frequencies of states in which core damage may occur. Furthermore, the review considered only internally generated accidents, consistent with the scope of the PRA. The review included an assessment of the assumptions and methods used in the Shoreham study. It also encompassed a reevaluation of the main results within the scope and general methodological framework of the Shoreham PRA, including both qualitative and quantitative analyses of accident initiators, data bases, and accident sequences which result in initiation of core damage. Specific comparisons are given between the Shoreham study, the results of the present review, and the WASH-1400 BWR, for the core damage frequency. The effect of modeling uncertainties was considered by a limited sensitivity study so as to show how the results would change if other assumptions were made. This review provides an independently assessed point value estimate of core damage frequency and describes the major contributors, by frontline systems and by accident sequences. 17 figs., 81 tabs

Internally generated natural variability of global-mean temperatures

International Nuclear Information System (INIS)

Wigley, T.M.L.; Raper, S.C.B.

1990-01-01

Quantitative frequency-domain and time-domain estimates are made of an important aspect of natural variability of global-mean temperatures, namely, passive internal variability resulting from the modulation of atmospheric variability by the ocean. The results are derived using an upwelling-diffusion, energy-balance climate model. In the frequency domain, analytical spectral results show a transition from a high-frequency region in which the response is determined by the mixed-layer heat capacity and is independent of the climate sensitivity (time scales less than around 10 years), to a low-frequency region in which the response depends only on the climate sensitivity. In the former region the spectral power is proportional to f -2 , where f is the frequency, while in the latter the power is independent of frequency. The range of validity of these results depends on the components of the climate system that are included in the model. In this case these restrict the low-frequency results to time scales less than about 1,000 years. A qualitative extrapolation is presented in an attempt to explain the observed low-frequency power spectra from deep-sea-core δ 18 O time series. The spectral results are also used to estimate the effective heat capacity of the ocean as a function of frequency. At low frequencies, this can range up to 50 times greater than the heat capacity of the mixed layer. Results in the time domain are obtained by solving the model equations numerically

Characterizing Damage of Brown Marmorated Stink Bug (Hemiptera: Pentatomidae) in Blueberries.

Science.gov (United States)

Wiman, Nik G; Parker, Joyce E; Rodriguez-Saona, Cesar; Walton, Vaughn M

2015-06-01

Brown marmorated stink bug, Halyomorpha halys (Stål) (Hemiptera: Pentatomidae), is a severe economic pest of growing importance in the United States, Canada, and Europe. While feeding damage from H. halys has been characterized in tree fruit, vegetables, and agronomic crops, less is known about the impacts of stink bugs on small fruits such as blueberries. In this study, we examined H. halys feeding on two representative early and late ripening blueberry cultivars in Oregon and New Jersey. This research examined how different densities of H. halys confined on blueberry clusters for week-long periods affected fruit quality at harvest. After fruit were ripe, we stained and quantified the number of salivary sheaths on berries as an indication of feeding pressure. Feeding by H. halys damaged the fruits by causing increased levels of external discoloration, and internal damage in the form of tissue necrosis. Exposure of berries to H. halys was also associated with decreasing berry weights and lower soluble solids in fruits. However, the different cultivars did not respond consistently to feeding pressure from H. halys. Weekly variability in feeding pressure of two of the cultivars as quantified by the number of stylet sheaths per berry was largely accounted for by environmental variables. We conclude that H. halys does have potential to severely damage blueberries and may become an important economic pest. Characterization of damage is important because correct identification of insect damage is key for successful management. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Flood damage estimation of companies: A comparison of Stage-Damage-Functions and Random Forests

Science.gov (United States)

Sieg, Tobias; Kreibich, Heidi; Vogel, Kristin; Merz, Bruno

2017-04-01

The development of appropriate flood damage models plays an important role not only for the damage assessment after an event but also to develop adaptation and risk mitigation strategies. So called Stage-Damage-Functions (SDFs) are often applied as a standard approach to estimate flood damage. These functions assign a certain damage to the water depth depending on the use or other characteristics of the exposed objects. Recent studies apply machine learning algorithms like Random Forests (RFs) to model flood damage. These algorithms usually consider more influencing variables and promise to depict a more detailed insight into the damage processes. In addition they provide an inherent validation scheme. Our study focuses on direct, tangible damage of single companies. The objective is to model and validate the flood damage suffered by single companies with SDFs and RFs. The data sets used are taken from two surveys conducted after the floods in the Elbe and Danube catchments in the years 2002 and 2013 in Germany. Damage to buildings (n = 430), equipment (n = 651) as well as goods and stock (n = 530) are taken into account. The model outputs are validated via a comparison with the actual flood damage acquired by the surveys and subsequently compared with each other. This study investigates the gain in model performance with the use of additional data and the advantages and disadvantages of the RFs compared to SDFs. RFs show an increase in model performance with an increasing amount of data records over a comparatively large range, while the model performance of the SDFs is already saturated for a small set of records. In addition, the RFs are able to identify damage influencing variables, which improves the understanding of damage processes. Hence, RFs can slightly improve flood damage predictions and provide additional insight into the underlying mechanisms compared to SDFs.

Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit 1: Analysis of core damage frequency from internal floods during mid-loop operations. Volume 4

International Nuclear Information System (INIS)

Kohut, P.

1994-07-01

The major objective of the Surry internal flood analysis was to provide an improved understanding of the core damage scenarios arising from internal flood-related events. The mean core damage frequency of the Surry plant due to internal flood events during mid-loop operations is 4.8E-06 per year, and the 5th and 95th percentiles are 2.2E-07 and 1.8E-05 per year, respectively. Some limited sensitivity calculations were performed on three plant improvement options. The most significant result involves modifications of intake-level structure on the canal, which reduced core damage frequency contribution from floods in mid-loop by about 75%

TEDS-M 2008 User Guide for the International Database. Supplement 3: Variables Derived from the Educator and Future Teacher Data

Science.gov (United States)

Brese, Falk, Ed.

2012-01-01

This supplement contains documentation on all the derived variables contained in the TEDS-M educator and future teacher data files. These derived variables were used to report data in the TEDS-M international reports. The variables that constitute the scales and indices are made available as part of the TEDS-M International Database to be used in…

The relationship between emotion regulation capacity, heart rate variability, and quality of life in individuals with alcohol-related brain damage

Directory of Open Access Journals (Sweden)

Steinmetz JP

2016-08-01

Full Text Available Jean-Paul Steinmetz,1,2 Claus Vögele,3,4 Christiane Theisen-Flies,5 Carine Federspiel,1,2 Stefan Sütterlin6,7 1Department of Research and Development, ZithaSenior, 2Centre for Memory and Mobility, ZithaSenior, 3Institute for Health and Behaviour, Integrative Research Unit on Social and Individual Development (INSIDE, University of Luxembourg, Luxembourg; 4Research Group Health Psychology, University of Leuven, Leuven, Belgium; 5Home St Joseph, ZithaSenior, Luxembourg; 6Department of Psychology, Lillehammer University College, Lillehammer, 7Division of Surgery and Clinical Neuroscience, Department of Psychosomatic Medicine, Oslo University Hospital – Rikshospitalet, Oslo, Norway Abstract: The reliable measurement of quality of life (QoL presents a challenge in individuals with alcohol-related brain damage. This study investigated vagally mediated heart rate variability (vmHRV as a physiological predictor of QoL. Self- and proxy ratings of QoL and dysexecutive symptoms were collected once, while vmHRV was repeatedly assessed over a 3-week period at weekly intervals in a sample of nine alcohol-related brain damaged patients. We provide robustness checks, bootstrapped correlations with confidence intervals, and standard errors for mean scores. We observed low to very low heart rate variability scores in our patients in comparison to norm values found in healthy populations. Proxy ratings of the QoL scale “subjective physical and mental performance” and everyday executive dysfunctions were strongly related to vmHRV. Better proxy-rated QoL and fewer dysexecutive symptoms were observed in those patients with higher vmHRV. Overall, patients showed low parasympathetic activation favoring the occurrence of dysfunctional emotion regulation strategies. Keywords: heart rate variability, emotion regulation, alcohol-related brain damage, quality of life

Damageable contact between an elastic body and a rigid foundation

Science.gov (United States)

Campo, M.; Fernández, J. R.; Silva, A.

2009-02-01

In this work, the contact problem between an elastic body and a rigid obstacle is studied, including the development of material damage which results from internal compression or tension. The variational problem is formulated as a first-kind variational inequality for the displacements coupled with a parabolic partial differential equation for the damage field. The existence of a unique local weak solution is stated. Then, a fully discrete scheme is introduced using the finite element method to approximate the spatial variable and an Euler scheme to discretize the time derivatives. Error estimates are derived on the approximate solutions, from which the linear convergence of the algorithm is deduced under suitable regularity conditions. Finally, three two-dimensional numerical simulations are performed to demonstrate the accuracy and the behaviour of the scheme.

Variable-angle total internal reflection fluorescence microscopy of intact cells of Arabidopsis thaliana

Directory of Open Access Journals (Sweden)

Kim Myung K

2011-09-01

Full Text Available Abstract Background Total internal reflection fluorescence microscopy (TIRFM is a powerful tool for observing fluorescently labeled molecules on the plasma membrane surface of animal cells. However, the utility of TIRFM in plant cell studies has been limited by the fact that plants have cell walls, thick peripheral layers surrounding the plasma membrane. Recently, a new technique known as variable-angle epifluorescence microscopy (VAEM was developed to circumvent this problem. However, the lack of a detailed analysis of the optical principles underlying VAEM has limited its applications in plant-cell biology. Results Here, we present theoretical and experimental evidence supporting the use of variable-angle TIRFM in observations of intact plant cells. We show that when total internal reflection occurs at the cell wall/cytosol interface with an appropriate angle of incidence, an evanescent wave field of constant depth is produced inside the cytosol. Results of experimental TIRFM observations of the dynamic behaviors of phototropin 1 (a membrane receptor protein and clathrin light chain (a vesicle coat protein support our theoretical analysis. Conclusions These findings demonstrate that variable-angle TIRFM is appropriate for quantitative live imaging of cells in intact tissues of Arabidopsis thaliana.

Uncertainty in Indian Ocean Dipole response to global warming: the role of internal variability

Science.gov (United States)

Hui, Chang; Zheng, Xiao-Tong

2018-01-01

The Indian Ocean Dipole (IOD) is one of the leading modes of interannual sea surface temperature (SST) variability in the tropical Indian Ocean (TIO). The response of IOD to global warming is quite uncertain in climate model projections. In this study, the uncertainty in IOD change under global warming, especially that resulting from internal variability, is investigated based on the community earth system model large ensemble (CESM-LE). For the IOD amplitude change, the inter-member uncertainty in CESM-LE is about 50% of the intermodel uncertainty in the phase 5 of the coupled model intercomparison project (CMIP5) multimodel ensemble, indicating the important role of internal variability in IOD future projection. In CESM-LE, both the ensemble mean and spread in mean SST warming show a zonal positive IOD-like (pIOD-like) pattern in the TIO. This pIOD-like mean warming regulates ocean-atmospheric feedbacks of the interannual IOD mode, and weakens the skewness of the interannual variability. However, as the changes in oceanic and atmospheric feedbacks counteract each other, the inter-member variability in IOD amplitude change is not correlated with that of the mean state change. Instead, the ensemble spread in IOD amplitude change is correlated with that in ENSO amplitude change in CESM-LE, reflecting the close inter-basin relationship between the tropical Pacific and Indian Ocean in this model.

TIMSS 2011 User Guide for the International Database. Supplement 3: Variables Derived from the Student, Home, Teacher, and School Questionnaire Data

Science.gov (United States)

Foy, Pierre, Ed.; Arora, Alka, Ed.; Stanco, Gabrielle M., Ed.

2013-01-01

This supplement contains documentation on all the derived variables contained in the TIMSS 2011 data files that are based on background questionnaire variables. These variables were used to report background data in the TIMSS 2011 International Results in Mathematics and TIMSS 2011 International Results in Science reports, and are made available…

Overview of the RPV-2 and INTERN-1 packages: From primary damage to microplasticity

International Nuclear Information System (INIS)

Adjanor, G.; Bugat, S.; Domain, C.; Barbu, A.

2010-01-01

In the framework of the European project PERFECT, four multiscale simulation packages dedicated to the prediction of evolution of material properties were developed. Among them, the RPV-2 and INTERN-1 are two simulation sequences of similar structure dealing with radiation damage in the reactor pressure vessel and the reactor internal structures, respectively. Both start at the atomic scale, where the neutron spectrum of the specified reactor is used to determine the energy distribution of the primary knocked-on atoms (PKA). A database of molecular dynamics results is then used to integrate the instantaneous production of defect clusters resulting from the displacement cascades initiated by each PKA. Depending on the type of calculation chosen to model long-term diffusion and reactions of defect clusters, precipitates and mixed-clusters, this primary damage enters either in rate equations or in Object Kinetic Monte Carlo simulations. The later correspond to a more accurate (but also more computationally demanding) physical model for diffusion as positions of objects on a lattice are explicitly treated. Finally, the increase of critical resolved shear stress is estimated from these cluster distributions either using an analytical model, taking into account the self and mutual dipole interactions of dislocations pinned on randomly dispersed unshearable obstacles, or by simulating the glide of a single dislocation line in its main slip system. Dislocation dynamics simulations were already used to validate some of the assumptions of the latter models, and will be fully integrated in the next versions of the packages.

FAA/NASA International Symposium on Advanced Structural Integrity Methods for Airframe Durability and Damage Tolerance, part 2

Science.gov (United States)

Harris, Charles E. (Editor)

1994-01-01

The international technical experts in the areas of durability and damage tolerance of metallic airframe structures were assembled to present and discuss recent research findings and the development of advanced design and analysis methods, structural concepts, and advanced materials. The principal focus of the symposium was on the dissemination of new knowledge and the peer-review of progress on the development of advanced methodologies. Papers were presented on the following topics: structural concepts for enhanced durability, damage tolerance, and maintainability; new metallic alloys and processing technology; fatigue crack initiation and small crack effects; fatigue crack growth models; fracture mechanics failure criteria for ductile materials; structural mechanics methodology for residual strength and life prediction; development of flight load spectra for design and testing; and corrosion resistance.

No effect of short-term amino acid supplementation on variables related to skeletal muscle damage in 100 km ultra-runners - a randomized controlled trial

Directory of Open Access Journals (Sweden)

Rosemann Thomas

2011-04-01

Full Text Available Abstract Background The purpose of this study was to investigate the effect of short-term supplementation of amino acids before and during a 100 km ultra-marathon on variables of skeletal muscle damage and muscle soreness. We hypothesized that the supplementation of amino acids before and during an ultra-marathon would lead to a reduction in the variables of skeletal muscle damage, a decrease in muscle soreness and an improved performance. Methods Twenty-eight experienced male ultra-runners were divided into two groups, one with amino acid supplementation and the other as a control group. The amino acid group was supplemented a total of 52.5 g of an amino acid concentrate before and during the 100 km ultra-marathon. Pre- and post-race, creatine kinase, urea and myoglobin were determined. At the same time, the athletes were asked for subjective feelings of muscle soreness. Results Race time was not different between the groups when controlled for personal best time in a 100 km ultra-marathon. The increases in creatine kinase, urea and myoglobin were not different in both groups. Subjective feelings of skeletal muscle soreness were not different between the groups. Conclusions We concluded that short-term supplementation of amino acids before and during a 100 km ultra-marathon had no effect on variables of skeletal muscle damage and muscle soreness.

Variability in the susceptibility to UV induced DNA damage and repair capacity observed in lymphocytes from unexposed and exposed to pesticides Polish donors

International Nuclear Information System (INIS)

Cebulska-Wasilewska, A.; Dyga, W.; Drag, Z.

2000-01-01

The aim of this study was to find out whether occupational exposure to pesticides may affect the individual susceptibility to the induction of the DNA damage by genotoxic agents. Differences in sensitivity of human lymphocytes to UV and variability of the DNA damage repair capacity were investigated by use of the single cell gel-electrophoresis method (SCGE), also known as the Comet assay. Human lymphocytes were isolated from whole blood samples collected from 100 male donors from Poland. Among the donors 50 males were treated as reference group (no occupational exposure), average age was 38.7, and among them 68 % were recent or former smokers, the other 50 males were occupationally exposed to pesticides, average age was 39.1, and among them 58 % were recent or former smokers. Previously cryopreserved lymphocytes were defrosted and viability of the cells and DNA damage in lymphocytes prior to any in vitro studies was investigated. On the average the DNA damage detected in lymphocytes and expressed as the mean Comet tail moment was significantly higher in the exposed group than in the reference group. In order to evaluate sensitivity of human lymphocytes to UV and variability of the DNA damage repair capacity, defrosted cells were irradiated with 6 J/m 2 of UVC radiation and the DNA damages were estimated immediately after exposure to UV and after two hours of the incubation in presence or absence of phytohemoglutinin (PHA) cells division-stimulating agent. The same procedures were performed on the samples from aloud exposed an unexposed to pesticides. Comet assay detectable levels of the DNA damage were increasing during the incubation of cells following UVC exposure. Average levels of damage detected after incubation in presence of PHA of exposed to UV lymphocytes were lower than without PHA. In presence of phytohemoglutinin (PHA) results showed statistically significant (p=0.001) repair of the DNA damage for both reference and exposed group. No difference due to

The practical engineer-fine-tuning memory macros using variable internal delays

CERN Document Server

Gray, K

1999-01-01

Embedded memory blocks are extremely common in application-specific IC (ASIC) chips. In this era of design reuse, it is critical that these memory macros, as they are also called, should be as versatile as possible. Their $9 performance should be optimal, with adequate sense amplifier signal over the full manufacturing process range of the chip. Fortunately, several simple techniques exist for adapting memory macros to different applications running at $9 different speeds. The key is to design in delays that are variable and/or programmable. The approach is also helpful in debugging initial hardware where a memory macro is refusing to function because its timing is too fast and there $9 is insufficient internal delay for proper circuit operation. The techniques can also eliminate the process of redesigning and refabricating the initial hardware just to characterize it. A memory macro is made to function by internal $9 pulses, generated in the correct number, sequence and relationship by the internal timing ch...

Eccentric muscle damage has variable effects on motor unit recruitment thresholds and discharge patterns in elbow flexor muscles.

Science.gov (United States)

Dartnall, Tamara J; Rogasch, Nigel C; Nordstrom, Michael A; Semmler, John G

2009-07-01

The purpose of this study was to determine the effect of eccentric muscle damage on recruitment threshold force and repetitive discharge properties of low-threshold motor units. Ten subjects performed four tasks involving isometric contraction of elbow flexors while electromyographic (EMG) data were recorded from human biceps brachii and brachialis muscles. Tasks were 1) maximum voluntary contraction (MVC); 2) constant-force contraction at various submaximal targets; 3) motor unit recruitment threshold task; and 4) minimum motor unit discharge rate task. These tasks were performed on three separate days before, immediately after, and 24 h after eccentric exercise of elbow flexor muscles. MVC force declined (42%) immediately after exercise and remained depressed (29%) 24 h later, indicative of muscle damage. Mean motor unit recruitment threshold for biceps brachii was 8.4+/-4.2% MVC, (n=34) before eccentric exercise, and was reduced by 41% (5.0+/-3.0% MVC, n=34) immediately after and by 39% (5.2+/-2.5% MVC, n=34) 24 h after exercise. No significant changes in motor unit recruitment threshold were observed in the brachialis muscle. However, for the minimum tonic discharge rate task, motor units in both muscles discharged 11% faster (10.8+/-2.0 vs. 9.7+/-1.7 Hz) immediately after (n=29) exercise compared with that before (n=32). The minimum discharge rate variability was greater in brachialis muscle immediately after exercise (13.8+/-3.1%) compared with that before (11.9+/-3.1%) and 24 h after exercise (11.7+/-2.4%). No significant changes in minimum discharge rate variability were observed in the biceps brachii motor units after exercise. These results indicate that muscle damage from eccentric exercise alters motor unit recruitment thresholds for >or=24 h, but the effect is not the same in the different elbow flexor muscles.

Hydrogen damage in stainless steel

International Nuclear Information System (INIS)

Caskey, G.R. Jr.

1981-01-01

Hydrogen damage has been studied in a wide variety of stainless steels. Both internal and external hydrogen damage were evaluated by ductility or J-integral under rising tensile loads and by fractography. Analysis of the data has emphasized the potential effects of strain-induced martensite on hydrogen damage. Strain-induced martensite was neither necessary nor sufficient for hydrogen damage in the alloys studied. Neither ductility loss nor fracture-mode change correlated generally with martensite formation. Alloy composition, particularly nickel and nitrogen contents, was the primary factor in resistance to hydrogen damage. Thermomechanical processing, however, could alter the degree of hydrogen damage in an alloy and was critical for optimizing resistance to hydrogen damage. 10 figures, 10 tables

Analysis of core damage frequency: Peach Bottom, Unit 2 internal events appendices

International Nuclear Information System (INIS)

Kolaczkowski, A.M.; Cramond, W.R.; Sype, T.T.; Maloney, K.J.; Wheeler, T.A.; Daniel, S.L.

1989-08-01

This document contains the appendices for the accident sequence analysis of internally initiated events for the Peach Bottom, Unit 2 Nuclear Power Plant. This is one of the five plant analyses conducted as part of the NUREG-1150 effort for the Nuclear Regulatory Commission. The work performed and described here is an extensive reanalysis of that published in October 1986 as NUREG/CR-4550, Volume 4. It addresses comments from numerous reviewers and significant changes to the plant systems and procedures made since the first report. The uncertainty analysis and presentation of results are also much improved, and considerable effort was expended on an improved analysis of loss of offsite power. The content and detail of this report is directed toward PRA practitioners who need to know how the work was done and the details for use in further studies. The mean core damage frequency is 4.5E-6 with 5% and 95% uncertainty bounds of 3.5E-7 and 1.3E-5, respectively. Station blackout type accidents (loss of all ac power) contributed about 46% of the core damage frequency with Anticipated Transient Without Scram (ATWS) accidents contributing another 42%. The numerical results are driven by loss of offsite power, transients with the power conversion system initially available operator errors, and mechanical failure to scram. 13 refs., 345 figs., 171 tabs

Local-scale changes in mean and heavy precipitation in Western Europe, climate change or internal variability?

Science.gov (United States)

Aalbers, Emma E.; Lenderink, Geert; van Meijgaard, Erik; van den Hurk, Bart J. J. M.

2017-09-01

High-resolution climate information provided by e.g. regional climate models (RCMs) is valuable for exploring the changing weather under global warming, and assessing the local impact of climate change. While there is generally more confidence in the representativeness of simulated processes at higher resolutions, internal variability of the climate system—`noise', intrinsic to the chaotic nature of atmospheric and oceanic processes—is larger at smaller spatial scales as well, limiting the predictability of the climate signal. To quantify the internal variability and robustly estimate the climate signal, large initial-condition ensembles of climate simulations conducted with a single model provide essential information. We analyze a regional downscaling of a 16-member initial-condition ensemble over western Europe and the Alps at 0.11° resolution, similar to the highest resolution EURO-CORDEX simulations. We examine the strength of the forced climate response (signal) in mean and extreme daily precipitation with respect to noise due to internal variability, and find robust small-scale geographical features in the forced response, indicating regional differences in changes in the probability of events. However, individual ensemble members provide only limited information on the forced climate response, even for high levels of global warming. Although the results are based on a single RCM-GCM chain, we believe that they have general value in providing insight in the fraction of the uncertainty in high-resolution climate information that is irreducible, and can assist in the correct interpretation of fine-scale information in multi-model ensembles in terms of a forced response and noise due to internal variability.

Local-scale changes in mean and heavy precipitation in Western Europe, climate change or internal variability?

Science.gov (United States)

Aalbers, Emma E.; Lenderink, Geert; van Meijgaard, Erik; van den Hurk, Bart J. J. M.

2018-06-01

High-resolution climate information provided by e.g. regional climate models (RCMs) is valuable for exploring the changing weather under global warming, and assessing the local impact of climate change. While there is generally more confidence in the representativeness of simulated processes at higher resolutions, internal variability of the climate system—`noise', intrinsic to the chaotic nature of atmospheric and oceanic processes—is larger at smaller spatial scales as well, limiting the predictability of the climate signal. To quantify the internal variability and robustly estimate the climate signal, large initial-condition ensembles of climate simulations conducted with a single model provide essential information. We analyze a regional downscaling of a 16-member initial-condition ensemble over western Europe and the Alps at 0.11° resolution, similar to the highest resolution EURO-CORDEX simulations. We examine the strength of the forced climate response (signal) in mean and extreme daily precipitation with respect to noise due to internal variability, and find robust small-scale geographical features in the forced response, indicating regional differences in changes in the probability of events. However, individual ensemble members provide only limited information on the forced climate response, even for high levels of global warming. Although the results are based on a single RCM-GCM chain, we believe that they have general value in providing insight in the fraction of the uncertainty in high-resolution climate information that is irreducible, and can assist in the correct interpretation of fine-scale information in multi-model ensembles in terms of a forced response and noise due to internal variability.

On the formulation, parameter identification and numerical integration of the EMMI model :plasticity and isotropic damage.

Energy Technology Data Exchange (ETDEWEB)

Bammann, Douglas J.; Johnson, G. C. (University of California, Berkeley, CA); Marin, Esteban B.; Regueiro, Richard A. (University of Colorado, Boulder, CO)

2006-01-01

In this report we present the formulation of the physically-based Evolving Microstructural Model of Inelasticity (EMMI) . The specific version of the model treated here describes the plasticity and isotropic damage of metals as being currently applied to model the ductile failure process in structural components of the W80 program . The formulation of the EMMI constitutive equations is framed in the context of the large deformation kinematics of solids and the thermodynamics of internal state variables . This formulation is focused first on developing the plasticity equations in both the relaxed (unloaded) and current configurations. The equations in the current configuration, expressed in non-dimensional form, are used to devise the identification procedure for the plasticity parameters. The model is then extended to include a porosity-based isotropic damage state variable to describe the progressive deterioration of the strength and mechanical properties of metals induced by deformation . The numerical treatment of these coupled plasticity-damage constitutive equations is explained in detail. A number of examples are solved to validate the numerical implementation of the model.

A continuum anisotropic damage model with unilateral effect

Directory of Open Access Journals (Sweden)

A. Alliche

2016-02-01

Full Text Available A continuum damage mechanics model has been derived within the framework of irreversible thermodynamics with internal variables in order to describe the behaviour of quasi-brittle materials under various loading paths. The anisotropic character induced by the progressive material degradation is explicitly taken into account, and the Helmholtz free energy is a scalar function of the basic invariants of the second order strain and damage tensors. The elastic response varies depending on the closed or open configuration of defects. The constitutive laws derived within the framework of irreversible thermodynamics theory display a dissymmetry as well as unilateral effects under tensile and compressive loading conditions. This approach verifies continuity and uniqueness of the potential energy. An application to uniaxial tension-compression loading shows a good adequacy with experimental results when available, and realistic evolutions for computed stresses and strains otherwise.

Analysis of oxidative DNA damage, Part II: Synthesis of the internal standard 8-[18O]hydroxy-2'-deoxyguanosine

NARCIS (Netherlands)

Hermanns RCA; Zomer G; Stavenuiter JFC; Westra G; Visser T; van de Werken G

1993-01-01

In the project 'Oxidative DNA Damage' the first aim is to develop a mass spectrometric method for the quantification of 8-hydroxy-2'- deoxyguanosine (oh8dG). The required precision of the method requires the application of a labeled analogue as an internal standard. This report

International Co-operation in providing insurance cover for nuclear damage to third parties and for damage to nuclear installations

International Nuclear Information System (INIS)

Deprimoz, Jacques

1983-01-01

This article in three parts analyses cover for damage to third parties by fixed nuclear installations, cover for damage to third parties during transport of nuclear substances and finally, cover for damage to nuclear installations. Part I reviews the principles of nuclear third party liability and describes nuclear insurance pools, the coverage and contracts provided. Part II describes inter alia the role of pools in transport operations as well as the type of contracts available, while Part III discusses material damage, the pools' capacities and the vast sums involved in indemnifying such damage. (NEA) [fr

Internal and forced eddy variability in the Labrador Sea

Science.gov (United States)

Bracco, A.; Luo, H.; Zhong, Y.; Lilly, J.

2009-04-01

Water mass transformation in the Labrador Sea, widely believed to be one of the key regions in the Atlantic Meridional Overturning Circulation (AMOC), now appears to be strongly impacted by vortex dynamics of the unstable boundary current. Large interannual variations in both eddy shedding and buoyancy transport from the boundary current have been observed but not explained, and are apparently sensitive to the state of the inflowing current. Heat and salinity fluxes associated with the eddies drive ventilation changes not accounted for by changes in local surface forcing, particularly during occasional years of extreme eddy activity, and constitute a predominant source of "internal" oceanic variability. The nature of this variable eddy-driven restratification is one of the outstanding questions along the northern transformation pathway. Here we investigate the eddy generation mechanism and the associated buoyancy fluxes by combining realistic and idealized numerical modeling, data analysis, and theory. Theory, supported by idealized experiments, provides criteria to test hypotheses as to the vortex formation process (by baroclinic instability linked to the bottom topography). Ensembles of numerical experiments with a high-resolution regional model (ROMS) allow for quantifying the sensitivity of eddy generation and property transport to variations in local and external forcing parameters. For the first time, we reproduce with a numerical simulation the observed interannual variability in the eddy kinetic energy in the convective region of the Labrador Basin and along the West Greenland Current.

Literature Reviews on Modeling Internal Geometry of Textile Composites and Rate-Independent Continuum Damage

Science.gov (United States)

Su-Yuen, Hsu

2011-01-01

Textile composite materials have good potential for constructing composite structures where the effects of three-dimensional stresses are critical or geometric complexity is a manufacturing concern. There is a recent interest in advancing competence within Langley Research Center for modeling the degradation of mechanical properties of textile composites. In an initial effort, two critical areas are identified to pursue: (1) Construction of internal geometry of textile composites, and (2) Rate-independent continuum damage mechanics. This report documents reviews on the two subjects. Various reviewed approaches are categorized, their assumptions, methods, and progress are briefed, and then critiques are presented. Each review ends with recommended research.

Fuzzy stochastic damage mechanics (FSDM based on fuzzy auto-adaptive control theory

Directory of Open Access Journals (Sweden)

Ya-jun Wang

2012-06-01

Full Text Available In order to fully interpret and describe damage mechanics, the origin and development of fuzzy stochastic damage mechanics were introduced based on the analysis of the harmony of damage, probability, and fuzzy membership in the interval of [0,1]. In a complete normed linear space, it was proven that a generalized damage field can be simulated through β probability distribution. Three kinds of fuzzy behaviors of damage variables were formulated and explained through analysis of the generalized uncertainty of damage variables and the establishment of a fuzzy functional expression. Corresponding fuzzy mapping distributions, namely, the half-depressed distribution, swing distribution, and combined swing distribution, which can simulate varying fuzzy evolution in diverse stochastic damage situations, were set up. Furthermore, through demonstration of the generalized probabilistic characteristics of damage variables, the cumulative distribution function and probability density function of fuzzy stochastic damage variables, which show β probability distribution, were modified according to the expansion principle. The three-dimensional fuzzy stochastic damage mechanical behaviors of the Longtan rolled-concrete dam were examined with the self-developed fuzzy stochastic damage finite element program. The statistical correlation and non-normality of random field parameters were considered comprehensively in the fuzzy stochastic damage model described in this paper. The results show that an initial damage field based on the comprehensive statistical evaluation helps to avoid many difficulties in the establishment of experiments and numerical algorithms for damage mechanics analysis.

Rapid grounding line migration induced by internal variability of a marine-terminating ice stream

Science.gov (United States)

Robel, A.; Schoof, C.; Tziperman, E.

2013-12-01

Numerous studies have found significant variability in the velocity of ice streams to be a prominent feature of geomorphologic records in the Siple Coast (Catania et al. 2012) and other regions in West Antarctica (Dowdeswell et al. 2008). Observations indicate that grounding line position is strongly influenced by ice stream variability, producing rapid grounding line migration in the recent past (Catania et al. 2006) and the modern (Joughin & Tulaczyk 2002). We analyze the interaction of grounding line mass flux and position in a marine-terminating ice stream using a stretch-coordinate flowline model. This model is based on that described in Schoof (2007), with a mesh refined near the grounding line to ensure accurate resolution of the mechanical transition zone. Here we have added lateral shear stress (Dupont & Alley 2005) and an undrained plastic bed (Tulaczyk et al. 2000). The parameter dependence of ice stream variability seen in this model compares favorably to both simpler (Robel et al. 2013) and more complex (van der Wel et al. 2013) models, though with some key differences. We find that thermally-induced internal ice stream variability can cause very rapid grounding line migration even in the absence of retrograde bed slopes or external forcing. Activation waves propagate along the ice stream length and trigger periods of rapid grounding line migration. We compare the behavior of the grounding line due to internal ice stream variability to changes triggered externally at the grounding line such as the rapid disintegration of buttressing ice shelves. Implications for Heinrich events and the Marine Ice Sheet Instability are discussed.

Compensation for oil pollution damage caused by oil spills from ships and the International Oil Pollution Compensation Fund

International Nuclear Information System (INIS)

Jacobsson, M.

1994-01-01

Liability and compensation for pollution damage caused by oil spills from laden tankers is governed by two international conventions: the 1969 Civil Liability Convention and the 1971 Fund Convention. The Civil Liability Convention established a system of strict liability for tanker owners and introduced compulsory liability insurance. The Fund Convention created a system of supplementary compensation administered by an intergovernmental organization, the International Oil Pollution Compensation Fund (IOPC Fund), which at present has 56 member states (August 1993). The IOPC Fund pays compensation to victims of oil pollution in member states when the compensation from the ship owner and his insurer is insufficient. (author)

Updated Vertical Extent of Collision Damage

DEFF Research Database (Denmark)

Tagg, R.; Bartzis, P.; Papanikolaou, P.

2002-01-01

The probabilistic distribution of the vertical extent of collision damage is an important and somewhat controversial component of the proposed IMO harmonized damage stability regulations for cargo and passenger ships. The only pre-existing vertical distribution, currently used in the international...

Criterion of damage beginning: experimental identification for laminate composite

International Nuclear Information System (INIS)

Thiebaud, F.; Perreux, D.; Varchon, D.; Lebras, J.

1996-01-01

The aim of this study is to propose a criterion of damage beginning for laminate composite. The materials is a glass-epoxy laminate [+55 deg.,-55 deg.[ n performed by winding filament process. First of all a description of the damage is performed and allows to define a damage variable. Thanks to the potential of free energy, an associated variable is defined. The damage criterion is written by using this last one. The parameter of the criterion is identified using mechanical and acoustical methods. The result is compared and exhibit a good agreement. (authors). 13 refs., 5 figs

FAA/NASA International Symposium on Advanced Structural Integrity Methods for Airframe Durability and Damage Tolerance, part 2

Energy Technology Data Exchange (ETDEWEB)

Harris, C.E.

1994-09-01

The international technical experts in the areas of durability and damage tolerance of metallic airframe structures were assembled to present and discuss recent research findings and the development of advanced design and analysis methods, structural concepts, and advanced materials. The principal focus of the symposium was on the dissemination of new knowledge and the peer-review of progress on the development of advanced methodologies. Papers were presented on the following topics: structural concepts for enhanced durability, damage tolerance, and maintainability; new metallic alloys and processing technology; fatigue crack initiation and small crack effects; fatigue crack growth models; fracture mechanics failure criteria for ductile materials; structural mechanics methodology for residual strength and life prediction; development of flight load spectra for design and testing; and corrosion resistance. Separate articles from this report have been indexed into the database.

Cell to Cell Variability of Radiation-Induced Foci: Relation between Observed Damage and Energy Deposition.

Science.gov (United States)

Gruel, Gaëtan; Villagrasa, Carmen; Voisin, Pascale; Clairand, Isabelle; Benderitter, Marc; Bottollier-Depois, Jean-François; Barquinero, Joan Francesc

2016-01-01

Most studies that aim to understand the interactions between different types of photon radiation and cellular DNA assume homogeneous cell irradiation, with all cells receiving the same amount of energy. The level of DNA damage is therefore generally determined by averaging it over the entire population of exposed cells. However, evaluating the molecular consequences of a stochastic phenomenon such as energy deposition of ionizing radiation by measuring only an average effect may not be sufficient for understanding some aspects of the cellular response to this radiation. The variance among the cells associated with this average effect may also be important for the behaviour of irradiated tissue. In this study, we accurately estimated the distribution of the number of radiation-induced γH2AX foci (RIF) per cell nucleus in a large population of endothelial cells exposed to 3 macroscopic doses of gamma rays from 60Co. The number of RIF varied significantly and reproducibly from cell to cell, with its relative standard deviation ranging from 36% to 18% depending on the macroscopic dose delivered. Interestingly, this relative cell-to-cell variability increased as the dose decreased, contrary to the mean RIF count per cell. This result shows that the dose effect, in terms of the number of DNA lesions indicated by RIF is not as simple as a purely proportional relation in which relative SD is constant with dose. To analyse the origins of this observed variability, we calculated the spread of the specific energy distribution for the different target volumes and subvolumes in which RIF can be generated. Variances, standard deviations and relative standard deviations all changed similarly from dose to dose for biological and calculated microdosimetric values. This similarity is an important argument that supports the hypothesis of the conservation of the association between the number of RIF per nucleus and the specific energy per DNA molecule. This comparison allowed us to

Cell to Cell Variability of Radiation-Induced Foci: Relation between Observed Damage and Energy Deposition.

Directory of Open Access Journals (Sweden)

Gaëtan Gruel

Full Text Available Most studies that aim to understand the interactions between different types of photon radiation and cellular DNA assume homogeneous cell irradiation, with all cells receiving the same amount of energy. The level of DNA damage is therefore generally determined by averaging it over the entire population of exposed cells. However, evaluating the molecular consequences of a stochastic phenomenon such as energy deposition of ionizing radiation by measuring only an average effect may not be sufficient for understanding some aspects of the cellular response to this radiation. The variance among the cells associated with this average effect may also be important for the behaviour of irradiated tissue. In this study, we accurately estimated the distribution of the number of radiation-induced γH2AX foci (RIF per cell nucleus in a large population of endothelial cells exposed to 3 macroscopic doses of gamma rays from 60Co. The number of RIF varied significantly and reproducibly from cell to cell, with its relative standard deviation ranging from 36% to 18% depending on the macroscopic dose delivered. Interestingly, this relative cell-to-cell variability increased as the dose decreased, contrary to the mean RIF count per cell. This result shows that the dose effect, in terms of the number of DNA lesions indicated by RIF is not as simple as a purely proportional relation in which relative SD is constant with dose. To analyse the origins of this observed variability, we calculated the spread of the specific energy distribution for the different target volumes and subvolumes in which RIF can be generated. Variances, standard deviations and relative standard deviations all changed similarly from dose to dose for biological and calculated microdosimetric values. This similarity is an important argument that supports the hypothesis of the conservation of the association between the number of RIF per nucleus and the specific energy per DNA molecule. This

How much can disaster and climate science contribute to loss and damage mechanisms in international climate policy?

Science.gov (United States)

Huggel, Christian; Allen, Simon; Eicken, Hajo; Hansen, Gerrit; Stone, Dáithí

2015-04-01

As the 5th Assessment Report of the Intergovernmental Panel on Climate Change (IPCC) recently has shown, there is increasing evidence of observed impacts of climate change on natural and human systems. Some of these impacts are negative and result in damage and loss of lives and assets. In international climate policy negotiations under the UNFCCC the discussions on loss and damage have gained significant traction during the past negotiation rounds. At COP 19 the Warsaw International Mechanism for Loss and Damage (WIM) was created as an institutional arrangement to address this issue. Thereby, loss and damage (L&D) are typically defined as the residual damage and loss that occur beyond mitigation and adaptation efforts. This implies that effective mitigation and adaptation policy can substantially reduce L&D. While there is wide agreement that knowledge and understanding needs to be strengthened on how L&D due to climate change affects countries, in particular highly vulnerable countries and populations, there is still substantial disagreement on several aspects. In fact, after COP20 in Lima a number of options are on the table, including whether L&D should be located under the adaptation framework or form a separate institutional arrangement, or whether a compensation regime should be established to support developing countries. Similarly, the scientific framework for a clear L&D concept, its application in real-world cases, and implications for international climate policy, in particular with respect to questions of responsibility, liability, compensation and financing, is still evolving. Earlier proposals, for instance, have included a threshold concept, with payments released upon crossing of certain thresholds of climate (related) parameters, similar to insurance procedures. The threshold would be defined as a departure of the parameter from baseline conditions, for instance a rainfall event that is more intense than a certain baseline based threshold. Further

Remedies for moral damage before the European Court of Human Rights: Cyprus v. Turkey case

Directory of Open Access Journals (Sweden)

Đajić Sanja

2014-01-01

Full Text Available This article provides the overview of the Cyprus v. Turkey judgment, a recently decided case before the Grand Chamber of the European Court for Human Rights. This is the first inter-State case which ended with pecuniary judgment for moral damages. The article begins with the overview of factual and legal issues in the Cyprus v. Turkey case which is followed by contextualizing this judgment within the general legal framework regarding moral damages and remedies available. The second part provides the insight into the case law of the International Court of Justice, European Court for Human Rights and international investment arbitration in order to assess the status of moral damages under general international law. While all international courts and tribunals recognize moral damage as a cause of action, they seem to respond differently to the issue of remedies. International Court of Justice seems to favour declaratory over pecuniary judgments; European Court of Human Rights tend to award both non-pecuniary and pecuniary remedies for moral damages; international investment tribunals seem to favour pecuniary remedies for moral damages. A separate issue is whether international law permits or rather proscribes punitive damages. While the ILC finds that general international law does not allow for punitive damages there are different opinions, at least within the ECHR setting, that moral damages are inherently punitive for fault-based conduct of the responsible state.

Anisotropic creep damage in the framework of continuum damage mechanics

International Nuclear Information System (INIS)

Caboche, J.L.

1983-01-01

For some years, various works have shown the possibility of applying continuum mechanics to model the evolution of the damage variable, initially introduced by Kachanov. Of interest here are the complex problems posed by the anisotropy which affects both the elastic behaviour and the viscoplastic one, and also the rupture phenomenon. The main concepts of the Continuum Damage Mechanics are briefly reviewed together with some classical ways to introduce anisotropy of damage in the particular case of proportional loadings. Based on previous works, two generalizations are presented and discussed, which use different kinds of tensors to describe the anisotropy of creep damage: - The first one, by Murakami and Ohno introduces a second rank damage tensor and a net stress tensor through a net area definition. The effective stress-strain behaviour is then obtained by a fourth rank tensor. - The second theory, by the author, uses one effective stress tensor only, defined in terms of the macroscopic strain behaviour, through a fourth-order non-symmetrical damage tensor. The two theories are compared at several levels: difference and similarities are pointed out for the damage evolution during tensile creep as well as for anisotropy effects. The possibilities are discussed and compared on the basis of some existing experimental results, which leads to a partial validation of the two approaches. (orig.)

Variability in the level of UV induced DNA damage in lymphocytes from unexposed and exposed to pesticides donors from Hungary

International Nuclear Information System (INIS)

Cebulska-Wasilewska, A.; Dyga, W.; Krasnowolski, S.; Florjan, D.; Siffel, C.

2000-01-01

incubation due to high level of DNA damage measured before and immediately after UV exposure. Frozen probes with lymphocytes after thawing revealed a large number of cells with high damages. Such a high level of initial DNA damage and small number of analyzed lymphocytes made probably impossible finding any influence of pesticides neither on the level of DNA damage nor on variability in the individual repair capacities. In conclusion, our results have not shown any influence of occupational exposures to DNA damage level and cellular capacity to repair. (author)

Socioeconomic status and organ damage in Mexican systemic lupus erythematosus women.

Science.gov (United States)

Mendoza-Pinto, C; Méndez-Martínez, S; Soto-Santillán, P; Galindo Herrera, J; Pérez-Contreras, I; Macías-Díaz, S; Taboada-Cole, A; García-Carrasco, M

2015-10-01

The objective of this cross-sectional study was to determine relationships between socioeconomic status and organ damage in Mexican systemic lupus erythematosus (SLE) patients. Demographic and clinical variables were assessed. Socioeconomic status was evaluated using the Graffar method and monthly household income. Lupus activity and organ damage were measured using the SLE disease activity scale, validated for the Mexican population (Mex-SLEDAI), and the Systemic Lupus International Collaborating Clinics/American College of Rheumatology (SLICC/ACR) scale. The 143 Mexican female SLE patients included (mean age 40.1 ± 8.9 years, mean disease duration 8.9 ± 6.3 years) had a mean monthly household income of $ 407.2 ± 326.5. According to the Graffar index, 18.9%, 52.5%, and 28.7% had high/medium-high, medium, and medium-low/low socioeconomic status, respectively. Organ damage was observed in 61 patients (42.7%). Patients with organ damage had lower monthly household incomes ($241.4 ± 152.4 vs. $354.8 ± 288.3) and were more frequently unemployed (57.3% vs. 35.3%; p = 0.01) than those without. Low monthly income was not associated with lupus activity or self-reported health status. In the adjusted multivariate analysis, low monthly income ( < $300) was associated with organ damage. In conclusion, low income may be associated with organ damage in Mexican SLE patients. © The Author(s) 2015.

Senate report on the bill authorizing joining the 2001 International Convention on Civil Liability for Bunker Oil Pollution Damage

International Nuclear Information System (INIS)

2010-01-01

This report recalls the different texts concerning the law of the sea: United Nations Convention on the Law of the Sea (UNCLOS) of 1982 which was ratified by France in 1996, the International Convention on Civil Liability for Oil Pollution of 1992, the creation of the International Oil Pollution Compensation Funds, and the International Convention on Liability and Compensation for Damage in Connection with the Carriage of Hazardous and Noxious Substances by sea (HNS) in 1996. While evoking some recent examples of wrecks and pollutions and some already existing French and European initiatives, it describes the implications and consequences of this convention on the French law and for its enforcement, provided that this new treaty is designed to take bunker oil into account as it may induce a significant pollution of the marine environment

Effective elastic properties of damaged isotropic solids

International Nuclear Information System (INIS)

Lee, U Sik

1998-01-01

In continuum damage mechanics, damaged solids have been represented by the effective elastic stiffness into which local damage is smoothly smeared. Similarly, damaged solids may be represented in terms of effective elastic compliances. By virtue of the effective elastic compliance representation, it may become easier to derive the effective engineering constants of damaged solids from the effective elastic compliances, all in closed form. Thus, in this paper, by using a continuum modeling approach based on both the principle of strain energy equivalence and the equivalent elliptical micro-crack representation of local damage, the effective elastic compliance and effective engineering constants are derived in terms of the undamaged (virgin) elastic properties and a scalar damage variable for both damaged two-and three-dimensional isotropic solids

[Variability of hemodynamic parameters and resistance to stress damage in rats of different strains].

Science.gov (United States)

Belkina, L M; Popkova, E V; Lakomkin, V L; Kirillina, T N; Zhukova, A G; Sazontova, T G; Usacheva, M A; Kapel'ko, V I

2006-02-01

Total power of heart rate variability and baroreflex sensitivity were significantly smaller in the August rats than in the Wistar rats, but adrenal and plasma catecholamine contents were considerably higher in the former ones. 1 hour after stress (30 min in cold water), plasma catecholamine was increased 2-fold in Wistar rats, while in August rats the adrenaline concentration increased only by 58% and the were no changes in noradrenaline content. At the same time, activation of catecholamine metabolism in the adrenal glands was similar in both groups. The oxidative stress induced by hydrogen peroxide depressed the contractile function of isolated heart in the August rats to a smaller extent as compared to Wistar rats, control ones and after the cold-water stress. This effect correlated with more pronounced stability ofantioxidant enzymes in the August rats. It seems that the greater resistance to stress damage in the August rats is mediated by enhanced power of defense mechanisms both at systemic and cellular levels.

Apportioning liability for transborder damage

International Nuclear Information System (INIS)

Krause-Ablass, W.D.

1988-01-01

The author analyses the different legal systems applicable to transfrontier nuclear damage. Using examples, he describes the mechanisms enabling a victim of such damage to identify the competent court and the relevant law, according to whether the provisions of the Paris or the Vienna Convention come into play or whether the rules of private international law, incorporated in the various national laws are applicable (NEA) [fr

Internal variability of a dynamically downscaled climate over North America

Energy Technology Data Exchange (ETDEWEB)

Wang, Jiali; Bessac, Julie; Kotamarthi, Rao; Constantinescu, Emil; Drewniak, Beth

2017-09-08

This study investigates the internal variability (IV) of a regional climate model, and considers the impacts of horizontal resolution and spectral nudging on the IV. A 16-member simulation ensemble was conducted using the Weather Research Forecasting model for three model configurations. Ensemble members included simulations at spatial resolutions of 50 km and 12 km without spectral nudging and simulations at a spatial resolution of 12 km with spectral nudging. All the simulations were generated over the same domain, which covered much of North America. The degree of IV was measured as the spread between the individual members of the ensemble during the integration period. The IV of the 12 km simulation with spectral nudging was also compared with a future climate change simulation projected by the same model configuration. The variables investigated focus on precipitation and near-surface air temperature. While the IVs show a clear annual cycle with larger values in summer and smaller values in winter, the seasonal IV is smaller for a 50-km spatial resolution than for a 12-km resolution when nudging is not applied. Applying a nudging technique to the 12-km simulation reduces the IV by a factor of two, and produces smaller IV than the simulation at 50 km without nudging. Applying a nudging technique also changes the geographic distributions of IV in all examined variables. The IV is much smaller than the inter-annual variability at seasonal scales for regionally averaged temperature and precipitation. The IV is also smaller than the projected changes in air-temperature for the mid- and late 21st century. However, the IV is larger than the projected changes in precipitation for the mid- and late 21st century.

Internal variability of a dynamically downscaled climate over North America

Energy Technology Data Exchange (ETDEWEB)

Wang, Jiali; Bessac, Julie; Kotamarthi, Rao; Constantinescu, Emil; Drewniak, Beth

2017-09-08

This study investigates the internal variability (IV) of a regional climate model, and considers the impacts of horizontal resolution and spectral nudging on the IV. A 16-member simulation ensemble was conducted using the Weather Research Forecasting model for three model configurations. Ensemble members included simulations at spatial resolutions of 50 and 12 km without spectral nudging and simulations at a spatial resolution of 12 km with spectral nudging. All the simulations were generated over the same domain, which covered much of North America. The degree of IV was measured as the spread between the individual members of the ensemble during the integration period. The IV of the 12 km simulation with spectral nudging was also compared with a future climate change simulation projected by the same model configuration. The variables investigated focus on precipitation and near-surface air temperature. While the IVs show a clear annual cycle with larger values in summer and smaller values in winter, the seasonal IV is smaller for a 50-km spatial resolution than for a 12-km resolution when nudging is not applied. Applying a nudging technique to the 12-km simulation reduces the IV by a factor of two, and produces smaller IV than the simulation at 50 km without nudging. Applying a nudging technique also changes the geographic distributions of IV in all examined variables. The IV is much smaller than the inter-annual variability at seasonal scales for regionally averaged temperature and precipitation. The IV is also smaller than the projected changes in air-temperature for the mid- and late twenty-first century. However, the IV is larger than the projected changes in precipitation for the mid- and late twenty-first century.

Internal variability of a dynamically downscaled climate over North America

Science.gov (United States)

Wang, Jiali; Bessac, Julie; Kotamarthi, Rao; Constantinescu, Emil; Drewniak, Beth

2017-09-01

This study investigates the internal variability (IV) of a regional climate model, and considers the impacts of horizontal resolution and spectral nudging on the IV. A 16-member simulation ensemble was conducted using the Weather Research Forecasting model for three model configurations. Ensemble members included simulations at spatial resolutions of 50 and 12 km without spectral nudging and simulations at a spatial resolution of 12 km with spectral nudging. All the simulations were generated over the same domain, which covered much of North America. The degree of IV was measured as the spread between the individual members of the ensemble during the integration period. The IV of the 12 km simulation with spectral nudging was also compared with a future climate change simulation projected by the same model configuration. The variables investigated focus on precipitation and near-surface air temperature. While the IVs show a clear annual cycle with larger values in summer and smaller values in winter, the seasonal IV is smaller for a 50-km spatial resolution than for a 12-km resolution when nudging is not applied. Applying a nudging technique to the 12-km simulation reduces the IV by a factor of two, and produces smaller IV than the simulation at 50 km without nudging. Applying a nudging technique also changes the geographic distributions of IV in all examined variables. The IV is much smaller than the inter-annual variability at seasonal scales for regionally averaged temperature and precipitation. The IV is also smaller than the projected changes in air-temperature for the mid- and late twenty-first century. However, the IV is larger than the projected changes in precipitation for the mid- and late twenty-first century.

Internal variability of a dynamically downscaled climate over North America

Science.gov (United States)

Wang, Jiali; Bessac, Julie; Kotamarthi, Rao; Constantinescu, Emil; Drewniak, Beth

2018-06-01

This study investigates the internal variability (IV) of a regional climate model, and considers the impacts of horizontal resolution and spectral nudging on the IV. A 16-member simulation ensemble was conducted using the Weather Research Forecasting model for three model configurations. Ensemble members included simulations at spatial resolutions of 50 and 12 km without spectral nudging and simulations at a spatial resolution of 12 km with spectral nudging. All the simulations were generated over the same domain, which covered much of North America. The degree of IV was measured as the spread between the individual members of the ensemble during the integration period. The IV of the 12 km simulation with spectral nudging was also compared with a future climate change simulation projected by the same model configuration. The variables investigated focus on precipitation and near-surface air temperature. While the IVs show a clear annual cycle with larger values in summer and smaller values in winter, the seasonal IV is smaller for a 50-km spatial resolution than for a 12-km resolution when nudging is not applied. Applying a nudging technique to the 12-km simulation reduces the IV by a factor of two, and produces smaller IV than the simulation at 50 km without nudging. Applying a nudging technique also changes the geographic distributions of IV in all examined variables. The IV is much smaller than the inter-annual variability at seasonal scales for regionally averaged temperature and precipitation. The IV is also smaller than the projected changes in air-temperature for the mid- and late twenty-first century. However, the IV is larger than the projected changes in precipitation for the mid- and late twenty-first century.

The vulnerability of silver fir populations to damage from late frosts

Directory of Open Access Journals (Sweden)

Klisz Marcin

2016-03-01

Full Text Available The aim of the study was to determine the vulnerability of selected silver fir populations to damage from late frost in the climatic conditions of south-eastern Poland. To determine the vulnerability of apical and lateral shoots to damage caused by late frosts, we observed four test plots in 2009 and 2014, each containing progenies of selected seed stands. Our statistical analyses were based on a model incorporating the following variables: site, year, type of frost damage, population as well as the possible interaction between these variables. Significant differences between the populations were found in terms of their sensitivity to damage from low temperature occurring during the growth period. Furthermore, we indirectly demonstrated differences in the severity of late frost on the experimental plots, as well as the intensity and variability of late frost shoot damage. Based on these results, we divided the studied populations into two groups of low (EF, KRA1 and NAR and high (LES2 and BAL2 sensitivity to late frost damage.

The Theory of Thermodynamic Systems with Internal Variables of State: Necessary and Sufficient Conditions for Compliance with the Second Law of Thermodynamics

Science.gov (United States)

Shnip, A. I.

2018-01-01

Based on the entropy-free thermodynamic approach, a generalized theory of thermodynamic systems with internal variables of state is being developed. For the case of nonlinear thermodynamic systems with internal variables of state and linear relaxation, the necessary and sufficient conditions have been proved for fulfillment of the second law of thermodynamics in entropy-free formulation which, according to the basic theorem of the theory, are also necessary and sufficient for the existence of a thermodynamic potential. Moreover, relations of correspondence between thermodynamic systems with memory and systems with internal variables of state have been established, as well as some useful relations in the spaces of states of both types of systems.

Spatial variability in oviposition damage by periodical cicadas in a fragmented landscape.

Science.gov (United States)

Cook, William M; Holt, Robert D; Yao, Jin

2001-03-01

Effects of the periodical cicada (Magicicada spp.) on forest dynamics are poorly documented. A 1998 emergence of M. cassini in eastern Kansas led to colonization of a fragmented experimental landscape undergoing secondary succession. We hypothesized that per-tree rates of oviposition damage by cicadas would reflect: (1) distance from the source of the emergence, (2) patch size, and (3) local tree density. Ovipositing females displayed clear preferences for host species and damage incidence showed predictable spatial patterns. Two species (smooth sumac, Rhus glabra, and eastern red cedar, Juniperus virginiana) were rarely attacked, whereas others (rough-leaved dogwood, Cornus drummondii; slippery elm, Ulmus rubra; box elder, Acer negundo, and honey locust, Gleditsia triacanthos) were strongly attacked. The dominant early successional tree, dogwood, received on average the most attacks. As predicted, attacks per stem declined strongly with distance from the emergence source, and with local stem density (a "dilution" effect). Contrary to expectations, there were more attacks per stem on larger patches. Because ovipositing cicadas cut damaging slits in host tree branches, potentially affecting tree growth rate, competitive ability, and capacity to reproduce, cicada damage could potentially influence spatial variation in secondary succession.

Pudendal Nerve and Internal Pudendal Artery Damage May Contribute to Radiation-Induced Erectile Dysfunction

Energy Technology Data Exchange (ETDEWEB)

Nolan, Michael W., E-mail: mwnolan@ncsu.edu [Department of Clinical Sciences, and Center for Comparative Medicine and Translational Research, North Carolina State University, Raleigh, North Carolina (United States); Department of Environmental and Radiologic Health Sciences, Colorado State University, Fort Collins, Colorado (United States); Marolf, Angela J. [Department of Environmental and Radiologic Health Sciences, Colorado State University, Fort Collins, Colorado (United States); Ehrhart, E.J. [Department of Microbiology, Immunology and Pathology, Colorado State University, Fort Collins, Colorado (United States); Rao, Sangeeta [Department of Clinical Sciences, Colorado State University, Fort Collins, Colorado (United States); Kraft, Susan L. [Department of Environmental and Radiologic Health Sciences, Colorado State University, Fort Collins, Colorado (United States); Engel, Stephanie [Department of Clinical Sciences, Colorado State University, Fort Collins, Colorado (United States); Yoshikawa, Hiroto; Golden, Anne E. [Department of Environmental and Radiologic Health Sciences, Colorado State University, Fort Collins, Colorado (United States); Wasserman, Todd H. [Department of Radiation Oncology, Washington University, St. Louis, Missouri (United States); LaRue, Susan M. [Department of Environmental and Radiologic Health Sciences, Colorado State University, Fort Collins, Colorado (United States)

2015-03-15

Purpose/Objectives: Erectile dysfunction is common after radiation therapy for prostate cancer; yet, the etiopathology of radiation-induced erectile dysfunction (RI-ED) remains poorly understood. A novel animal model was developed to study RI-ED, wherein stereotactic body radiation therapy (SBRT) was used to irradiate the prostate, neurovascular bundles (NVB), and penile bulb (PB) of dogs. The purpose was to describe vascular and neurogenic injuries after the irradiation of only the NVB or the PB, and after irradiation of all 3 sites (prostate, NVB, and PB) with varying doses of radiation. Methods and Materials: Dogs were treated with 50, 40, or 30 Gy to the prostate, NVB, and PB, or 50 Gy to either the NVB or the PB, by 5-fraction SBRT. Electrophysiologic studies of the pudendal nerve and bulbospongiosus muscles and ultrasound studies of pelvic perfusion were performed before and after SBRT. The results of these bioassays were correlated with histopathologic changes. Results: SBRT caused slowing of the systolic rise time, which corresponded to decreased arterial patency. Alterations in the response of the internal pudendal artery to vasoactive drugs were observed, wherein SBRT caused a paradoxical response to papaverine, slowing the systolic rise time after 40 and 50 Gy; these changes appeared to have some dose dependency. The neurofilament content of penile nerves was also decreased at high doses and was more profound when the PB was irradiated than when the NVB was irradiated. These findings are coincident with slowing of motor nerve conduction velocities in the pudendal nerve after SBRT. Conclusions: This is the first report in which prostatic irradiation was shown to cause morphologic arterial damage that was coincident with altered internal pudendal arterial tone, and in which decreased motor function in the pudendal nerve was attributed to axonal degeneration and loss. Further investigation of the role played by damage to these structures in RI-ED is

Effective properties of linear viscoelastic heterogeneous media: Internal variables formulation and extension to ageing behaviours

International Nuclear Information System (INIS)

Ricaud, J.M.; Masson, R.; Masson, R.

2009-01-01

The Laplace-Carson transform classically used for homogenization of linear viscoelastic heterogeneous media yields integral formulations of effective behaviours. These are far less convenient than internal variables formulations with respect to computational aspects as well as to theoretical extensions to closely related problems such as ageing viscoelasticity. Noticing that the collocation method is usually adopted to invert the Laplace-Carson transforms, we first remark that this approximation is equivalent to an internal variables formulation which is exact in some specific situations. This result is illustrated for a two-phase composite with phases obeying a compressible Maxwellian behaviour. Next, an incremental formulation allows to extend at each time step the previous general framework to ageing viscoelasticity. Finally, with the help of a creep test of a porous viscoelastic matrix reinforced with elastic inclusions, it is shown that the method yields accurate predictions (comparing to reference results provided by periodic cell finite element computations). (authors)

Active investigation of material damage under load using micro-CT

Energy Technology Data Exchange (ETDEWEB)

Navalgund, Megha, E-mail: megha.navalgund@ge.com; Mishra, Debasish; Manoharan, V. [NDE Lab, GE Global Research - Bangalore (India); Zunjarrao, Suraj [Composites Material Behavior Lab, GE Global Research-Bangalore (India)

2015-03-31

Due the growth of composite materials across multiple industries such as Aviation, Wind there is an increasing need to not just standardize and improve manufacturing processes but also to design these materials for the specific applications. One of the things that this translates to is understanding how failure initiates and grows in these materials and at what loads, especially around internal flaws such as voids or features such as ply drops. Traditional methods of investigating internal damage such as CT lack the resolution to resolve ply level damage in composites. Interrupted testing with layer removal can be used to investigate internal damage using microscopy; however this is a destructive method. Advanced techniques such as such as DIC are useful for in-situ damage detection, however are limited to surface information and would not enable interrogating the volume. Computed tomography has become a state of the art technique for metrology and complete volumetric investigation especially for metallic components. However, its application to the composite world is still nascent. This paper demonstrates micro-CT’s capability as a gauge to quantitatively estimate the extent of damage and understand the propagation of damage in PMC composites while the component is under stress.

Active investigation of material damage under load using micro-CT

Science.gov (United States)

Navalgund, Megha; Zunjarrao, Suraj; Mishra, Debasish; Manoharan, V.

2015-03-01

Due the growth of composite materials across multiple industries such as Aviation, Wind there is an increasing need to not just standardize and improve manufacturing processes but also to design these materials for the specific applications. One of the things that this translates to is understanding how failure initiates and grows in these materials and at what loads, especially around internal flaws such as voids or features such as ply drops. Traditional methods of investigating internal damage such as CT lack the resolution to resolve ply level damage in composites. Interrupted testing with layer removal can be used to investigate internal damage using microscopy; however this is a destructive method. Advanced techniques such as such as DIC are useful for in-situ damage detection, however are limited to surface information and would not enable interrogating the volume. Computed tomography has become a state of the art technique for metrology and complete volumetric investigation especially for metallic components. However, its application to the composite world is still nascent. This paper demonstrates micro-CT's capability as a gauge to quantitatively estimate the extent of damage & understand the propagation of damage in PMC composites while the component is under stress.

Active investigation of material damage under load using micro-CT

International Nuclear Information System (INIS)

Navalgund, Megha; Mishra, Debasish; Manoharan, V.; Zunjarrao, Suraj

2015-01-01

Due the growth of composite materials across multiple industries such as Aviation, Wind there is an increasing need to not just standardize and improve manufacturing processes but also to design these materials for the specific applications. One of the things that this translates to is understanding how failure initiates and grows in these materials and at what loads, especially around internal flaws such as voids or features such as ply drops. Traditional methods of investigating internal damage such as CT lack the resolution to resolve ply level damage in composites. Interrupted testing with layer removal can be used to investigate internal damage using microscopy; however this is a destructive method. Advanced techniques such as such as DIC are useful for in-situ damage detection, however are limited to surface information and would not enable interrogating the volume. Computed tomography has become a state of the art technique for metrology and complete volumetric investigation especially for metallic components. However, its application to the composite world is still nascent. This paper demonstrates micro-CT’s capability as a gauge to quantitatively estimate the extent of damage and understand the propagation of damage in PMC composites while the component is under stress

The Role of Information Technology as Moderating Variable and Internal Control Effectiveness as intervening in the Relationship between Human Resource Competency and Internal Auditor Service Quality on of Report

OpenAIRE

Haliah, Hamid,Irdam

2015-01-01

in general, this research is intended to investigate factors that effect quality of report of local government in west Sulawesi province, Indonesia. Human resource competence and quality of services of internal auditor have indirect effect through the effectiveness of internal control to the quality of the report. These results indicate that the effectiveness of internal control serves as an intervening variable on the relationship of competence of human resources and internal auditor service...

Elastic-Plastic Constitutive Equation of WC-Co Cemented Carbides with Anisotropic Damage

International Nuclear Information System (INIS)

Hayakawa, Kunio; Nakamura, Tamotsu; Tanaka, Shigekazu

2007-01-01

Elastic-plastic constitutive equation of WC-Co cemented carbides with anisotropic damage is proposed to predict a precise service life of cold forging tools. A 2nd rank symmetric tensor damage tensor is introduced in order to express the stress unilaterality; a salient difference in uniaxial behavior between tension and compression. The conventional framework of irreversible thermodynamics is used to derive the constitutive equation. The Gibbs potential is formulated as a function of stress, damage tensor, isotropic hardening variable and kinematic hardening variable. The elastic-damage constitutive equation, conjugate forces of damage, isotropic hardening and kinematic hardening variable is derived from the potential. For the kinematic hardening variable, the superposition of three kinematic hardening laws is employed in order to improve the cyclic behavior of the material. For the evolution equation of the damage tensor, the damage is assumed to progress by fracture of the Co matrix - WC particle interface and by the mechanism of fatigue, i.e. the accumulation of microscopic plastic strain in matrix and particles. By using the constitutive equations, calculation of uniaxial tensile and compressive test is performed and the results are compared with the experimental ones in the literature. Furthermore, finite element analysis on cold forward extrusion was carried out, in which the proposed constitutive equation was employed as die insert material

Does internal climate variability overwhelm climate change signals in streamflow? The upper Po and Rhone basin case studies

International Nuclear Information System (INIS)

Fatichi, S.; Rimkus, S.; Burlando, P.; Bordoy, R.

2014-01-01

Projections of climate change effects in streamflow are increasingly required to plan water management strategies. These projections are however largely uncertain due to the spread among climate model realizations, internal climate variability, and difficulties in transferring climate model results at the spatial and temporal scales required by catchment hydrology. A combination of a stochastic downscaling methodology and distributed hydrological modeling was used in the ACQWA project to provide projections of future streamflow (up to year 2050) for the upper Po and Rhone basins, respectively located in northern Italy and south-western Switzerland. Results suggest that internal (stochastic) climate variability is a fundamental source of uncertainty, typically comparable or larger than the projected climate change signal. Therefore, climate change effects in streamflow mean, frequency, and seasonality can be masked by natural climatic fluctuations in large parts of the analyzed regions. An exception to the overwhelming role of stochastic variability is represented by high elevation catchments fed by glaciers where streamflow is expected to be considerably reduced due to glacier retreat, with consequences appreciable in the main downstream rivers in August and September. Simulations also identify regions (west upper Rhone and Toce, Ticino river basins) where a strong precipitation increase in the February to April period projects streamflow beyond the range of natural climate variability during the melting season. This study emphasizes the importance of including internal climate variability in climate change analyses, especially when compared to the limited uncertainty that would be accounted for by few deterministic projections. The presented results could be useful in guiding more specific impact studies, although design or management decisions should be better based on reliability and vulnerability criteria as suggested by recent literature. - Highlights: �

Does internal climate variability overwhelm climate change signals in streamflow? The upper Po and Rhone basin case studies

Energy Technology Data Exchange (ETDEWEB)

Fatichi, S., E-mail: simone.fatichi@ifu.baug.ethz.ch; Rimkus, S.; Burlando, P.; Bordoy, R.

2014-09-15

Projections of climate change effects in streamflow are increasingly required to plan water management strategies. These projections are however largely uncertain due to the spread among climate model realizations, internal climate variability, and difficulties in transferring climate model results at the spatial and temporal scales required by catchment hydrology. A combination of a stochastic downscaling methodology and distributed hydrological modeling was used in the ACQWA project to provide projections of future streamflow (up to year 2050) for the upper Po and Rhone basins, respectively located in northern Italy and south-western Switzerland. Results suggest that internal (stochastic) climate variability is a fundamental source of uncertainty, typically comparable or larger than the projected climate change signal. Therefore, climate change effects in streamflow mean, frequency, and seasonality can be masked by natural climatic fluctuations in large parts of the analyzed regions. An exception to the overwhelming role of stochastic variability is represented by high elevation catchments fed by glaciers where streamflow is expected to be considerably reduced due to glacier retreat, with consequences appreciable in the main downstream rivers in August and September. Simulations also identify regions (west upper Rhone and Toce, Ticino river basins) where a strong precipitation increase in the February to April period projects streamflow beyond the range of natural climate variability during the melting season. This study emphasizes the importance of including internal climate variability in climate change analyses, especially when compared to the limited uncertainty that would be accounted for by few deterministic projections. The presented results could be useful in guiding more specific impact studies, although design or management decisions should be better based on reliability and vulnerability criteria as suggested by recent literature. - Highlights: �

Analysis of core damage frequency from internal events: Methodology guidelines: Volume 1

International Nuclear Information System (INIS)

Drouin, M.T.; Harper, F.T.; Camp, A.L.

1987-09-01

NUREG-1150 examines the risk to the public from a selected group of nuclear power plants. This report describes the methodology used to estimate the internal event core damage frequencies of four plants in support of NUREG-1150. In principle, this methodology is similar to methods used in past probabilistic risk assessments; however, based on past studies and using analysts that are experienced in these techniques, the analyses can be focused in certain areas. In this approach, only the most important systems and failure modes are modeled in detail. Further, the data and human reliability analyses are simplified, with emphasis on the most important components and human actions. Using these methods, an analysis can be completed in six to nine months using two to three full-time systems analysts and part-time personnel in other areas, such as data analysis and human reliability analysis. This is significantly faster and less costly than previous analyses and provides most of the insights that are obtained by the more costly studies. 82 refs., 35 figs., 27 tabs

Application of a Microstructure-Based ISV Plasticity Damage Model to Study Penetration Mechanics of Metals and Validation through Penetration Study of Aluminum

Directory of Open Access Journals (Sweden)

Yangqing Dou

2017-01-01

Full Text Available A developed microstructure-based internal state variable (ISV plasticity damage model is for the first time used for simulating penetration mechanics of aluminum to find out its penetration properties. The ISV damage model tries to explain the interplay between physics at different length scales that governs the failure and damage mechanisms of materials by linking the macroscopic failure and damage behavior of the materials with their micromechanical performance, such as void nucleation, growth, and coalescence. Within the continuum modeling framework, microstructural features of materials are represented using a set of ISVs, and rate equations are employed to depict damage history and evolution of the materials. For experimental calibration of this damage model, compression, tension, and torsion straining conditions are considered to distinguish damage evolutions under different stress states. To demonstrate the reliability of the presented ISV model, that model is applied for studying penetration mechanics of aluminum and the numerical results are validated by comparing with simulation results yielded from the Johnson-Cook model as well as analytical results calculated from an existing theoretical model.

The Selection, Use, and Reporting of Control Variables in International Business Research

DEFF Research Database (Denmark)

Nielsen, Bo Bernhard; Raswant, Arpit

2018-01-01

This study explores the selection, use, and reporting of control variables in studies published in the leading international business (IB) research journals. We review a sample of 246 empirical studies published in the top five IB journals over the period 2012–2015 with particular emphasis...... on selection, use, and reporting of controls. Approximately 83% of studies included only half of what we consider Minimum Standard of Practice with regards to controls, whereas only 38% of the studies met the 75% threshold. We provide recommendations on how to effectively identify, use and report controls...

Motor skills in kindergarten: Internal structure, cognitive correlates and relationships to background variables.

Science.gov (United States)

Oberer, Nicole; Gashaj, Venera; Roebers, Claudia M

2017-04-01

The present study aimed to contribute to the discussion about the relation between motor coordination and executive functions in preschool children. Specifically, the relation between gross and fine motor skills and executive functions as well as the relation to possible background variables (SES, physical activity) were investigated. Based on the data of N=156 kindergarten children the internal structure of motor skills was investigated and confirmed the theoretically assumed subdivision of gross and fine motor skills. Both, gross and fine motor skills correlated significantly with executive functions, whereas the background variables seemed to have no significant impact on the executive functions and motor skills. Higher order control processes are discussed as an explanation of the relation between executive functions and motor skills. Copyright © 2017 Elsevier B.V. All rights reserved.

The use of a xylosylated plant glycoprotein as an internal standard accounting for N-linked glycan cleavage and sample preparation variability.

Science.gov (United States)

Walker, S Hunter; Taylor, Amber D; Muddiman, David C

2013-06-30

Traditionally, free oligosaccharide internal standards are used to account for variability in glycan relative quantification experiments by mass spectrometry. However, a more suitable internal standard would be a glycoprotein, which could also control for enzymatic cleavage efficiency, allowing for more accurate quantitative experiments. Hydrophobic, hydrazide N-linked glycan reagents (both native and stable-isotope labeled) are used to derivatize and differentially label N-linked glycan samples for relative quantification, and the samples are analyzed by a reversed-phase liquid chromatography chip system coupled online to a Q-Exactive mass spectrometer. The inclusion of two internal standards, maltoheptaose (previously used) and horseradish peroxidase (HRP) (novel), is studied to demonstrate the effectiveness of using a glycoprotein as an internal standard in glycan relative quantification experiments. HRP is a glycoprotein containing a xylosylated N-linked glycan, which is unique from mammalian N-linked glycans. Thus, the internal standard xylosylated glycan could be detected without interference to the sample. Additionally, it was shown that differences in cleavage efficiency can be detected by monitoring the HRP glycan. In a sample where cleavage efficiency variation is minimal, the HRP glycan performs as well as maltoheptaose. Because the HRP glycan performs as well as maltoheptaose but is also capable of correcting and accounting for cleavage variability, it is a more versatile internal standard and will be used in all subsequent biological studies. Because of the possible lot-to-lot variation of an enzyme, differences in biological matrix, and variable enzyme activity over time, it is a necessity to account for glycan cleavage variability in glycan relative quantification experiments. Copyright © 2013 John Wiley & Sons, Ltd.

Compensation for damage in the case of transfrontier reactor accidents

International Nuclear Information System (INIS)

Gornig, G.

1986-01-01

The author discusses possibilities to recover in German and Soviet courts claims for the compensation of damage for a German citizen arising from the reactor accident in Chernobyl. Concerning the claims for damage suffered in the Federal Republic of Germany he investigates possible breaches of bilateral or multilateral international agreements and of universal international law by the Soviet Union. (WG) [de

Agricultural losses related to frost events: use of the 850 hPa level temperature as an explanatory variable of the damage cost

Science.gov (United States)

Papagiannaki, K.; Lagouvardos, K.; Kotroni, V.; Papagiannakis, G.

2014-09-01

The objective of this study is the analysis of damaging frost events in agriculture, by examining the relationship between the daily minimum temperature in the lower atmosphere (at an isobaric level of 850 hPa) and crop production losses. Furthermore, the study suggests a methodological approach for estimating agriculture risk due to frost events, with the aim of estimating the short-term probability and magnitude of frost-related financial losses for different levels of 850 hPa temperature. Compared with near-surface temperature forecasts, temperature forecasts at the level of 850 hPa are less influenced by varying weather conditions or by local topographical features; thus, they constitute a more consistent indicator of the forthcoming weather conditions. The analysis of the daily monetary compensations for insured crop losses caused by weather events in Greece shows that, during the period 1999-2011, frost caused more damage to crop production than any other meteorological phenomenon. Two regions of different geographical latitudes are examined further, to account for the differences in the temperature ranges developed within their ecological environment. Using a series of linear and logistic regressions, we found that minimum temperature (at an 850 hPa level), grouped into three categories according to its magnitude, and seasonality, are significant variables when trying to explain crop damage costs, as well as to predict and quantify the likelihood and magnitude of damaging frost events.

Valsalva and gravitational variability of the internal jugular vein and common femoral vein: Ultrasound assessment

Energy Technology Data Exchange (ETDEWEB)

Beddy, P. [Department of Radiology, The Adelaide and Meath Hospital, Tallaght, Dublin 24 (Ireland)]. E-mail: pbeddy@eircom.net; Geoghegan, T. [Department of Radiology, The Adelaide and Meath Hospital, Tallaght, Dublin 24 (Ireland); Ramesh, N. [Department of Radiology, The Adelaide and Meath Hospital, Tallaght, Dublin 24 (Ireland); Buckley, O. [Department of Radiology, The Adelaide and Meath Hospital, Tallaght, Dublin 24 (Ireland); O' Brien, J. [Department of Radiology, The Adelaide and Meath Hospital, Tallaght, Dublin 24 (Ireland); Colville, J. [Department of Radiology, The Adelaide and Meath Hospital, Tallaght, Dublin 24 (Ireland); Torreggiani, W.C. [Department of Radiology, The Adelaide and Meath Hospital, Tallaght, Dublin 24 (Ireland)

2006-05-15

Purpose: Central venous cannulation via the common femoral vein is an important starting point for many interventions. The purpose of this study was to determine the optimum conditions for cannulation of the femoral vein and to compare these with the relative changes in the internal jugular vein. Methods: High-resolution 2D ultrasound was utilised to determine variability of the calibre of the femoral and internal jugular veins in 10 healthy subjects. Venous diameter was assessed during the Valsalva manoeuvre and in different degrees of the Trendelenburg position. Results: The Valsalva manoeuvre significantly increased the size of the femoral and internal jugular veins. There was a relatively greater increase in femoral vein diameter when compared with the internal jugular vein of 40 and 29%, respectively. Changes in body inclination (Trendelenburg position) did not significantly alter the luminal diameter of the femoral vein. However, it significantly increased internal jugular vein diameter. Conclusions: Femoral vein cannulation is augmented by the Valsalva manoeuvre but not significantly altered by the gravitational position of the subject.

Multivariate pluvial flood damage models

International Nuclear Information System (INIS)

Van Ootegem, Luc; Verhofstadt, Elsy; Van Herck, Kristine; Creten, Tom

2015-01-01

Depth–damage-functions, relating the monetary flood damage to the depth of the inundation, are commonly used in the case of fluvial floods (floods caused by a river overflowing). We construct four multivariate damage models for pluvial floods (caused by extreme rainfall) by differentiating on the one hand between ground floor floods and basement floods and on the other hand between damage to residential buildings and damage to housing contents. We do not only take into account the effect of flood-depth on damage, but also incorporate the effects of non-hazard indicators (building characteristics, behavioural indicators and socio-economic variables). By using a Tobit-estimation technique on identified victims of pluvial floods in Flanders (Belgium), we take into account the effect of cases of reported zero damage. Our results show that the flood depth is an important predictor of damage, but with a diverging impact between ground floor floods and basement floods. Also non-hazard indicators are important. For example being aware of the risk just before the water enters the building reduces content damage considerably, underlining the importance of warning systems and policy in this case of pluvial floods. - Highlights: • Prediction of damage of pluvial floods using also non-hazard information • We include ‘no damage cases’ using a Tobit model. • The damage of flood depth is stronger for ground floor than for basement floods. • Non-hazard indicators are especially important for content damage. • Potential gain of policies that increase awareness of flood risks

Multivariate pluvial flood damage models

Energy Technology Data Exchange (ETDEWEB)

Van Ootegem, Luc [HIVA — University of Louvain (Belgium); SHERPPA — Ghent University (Belgium); Verhofstadt, Elsy [SHERPPA — Ghent University (Belgium); Van Herck, Kristine; Creten, Tom [HIVA — University of Louvain (Belgium)

2015-09-15

Depth–damage-functions, relating the monetary flood damage to the depth of the inundation, are commonly used in the case of fluvial floods (floods caused by a river overflowing). We construct four multivariate damage models for pluvial floods (caused by extreme rainfall) by differentiating on the one hand between ground floor floods and basement floods and on the other hand between damage to residential buildings and damage to housing contents. We do not only take into account the effect of flood-depth on damage, but also incorporate the effects of non-hazard indicators (building characteristics, behavioural indicators and socio-economic variables). By using a Tobit-estimation technique on identified victims of pluvial floods in Flanders (Belgium), we take into account the effect of cases of reported zero damage. Our results show that the flood depth is an important predictor of damage, but with a diverging impact between ground floor floods and basement floods. Also non-hazard indicators are important. For example being aware of the risk just before the water enters the building reduces content damage considerably, underlining the importance of warning systems and policy in this case of pluvial floods. - Highlights: • Prediction of damage of pluvial floods using also non-hazard information • We include ‘no damage cases’ using a Tobit model. • The damage of flood depth is stronger for ground floor than for basement floods. • Non-hazard indicators are especially important for content damage. • Potential gain of policies that increase awareness of flood risks.

Experiment and numerical simulation of welding induced damage: stainless steel 15-5PH

International Nuclear Information System (INIS)

Wu, T.

2007-11-01

The objective of this study is the prediction of damage and residual stresses induced by hot processing which leads to phase transformation in martensitic stainless steel. This study firstly concerns the modelling of the damage of material induced by a complex history of thermo-elastoplastic multiphase in heat-affected-zone (HAZ) of welding. In this work, a two-scale mode of elastoplastic damage multiphase was developed in the framework of thermodynamics of irreversible process. The constitutive equations are coupling with ductile damage, elasto-plasticity, phase transformation, and transformation plasticity. Besides, a damage equation was proposed based on the Lemaitre's damage model in the framework of continuum damage mechanics. The experiments of 15-5PH were implemented for the identification of phase transformation, transformation plasticity and damage models. Tensile tests of round specimens were used to identify the parameters of damage model as well as mechanical behaviours at various temperatures. Tests of flat notched specimen were designed to provide the validation of damage model and strain localization using three dimensional image correlation technologies. In addition, microscopic analysis was performed to provide microstructure characterization of 15-5PH and to discover the damage mechanism. Finally the numerical simulation was performed in the code CAST3M of CEA. On the one hand, numerical verification of the flat notched plates was implemented and compared with experimental results. On the other hand, we used the two-scale model including phase transformation, transformation plasticity and damage to simulate the level of residual stresses of a disk made of 15-5PH metal heated by laser. The internal variables, such as strain, stress, damage, were successfully traced in the simulation of two-scale model. The simulation results showed the transformation plasticity changes the level of residual stresses and should not be negligible; damage decreases

Creep-Fatigue Damage Evaluation of a Model Reactor Vessel and Reactor Internals of Sodium Test Facility according to ASME-NH and RCC-MRx Codes

International Nuclear Information System (INIS)

Lim, Dong-Won; Lee, Hyeong-Yeon; Eoh, Jae-Hyuk; Son, Seok-Kwon; Kim, Jong-Bum; Jeong, Ji-Young

2016-01-01

The objective of the STELLA-2 is to support the specific design approval for PGSFR by synthetic reviews of key safety issues and code validations through the integral effect tests. Due to its high temperature operation in SFRs (and in a testing facility) up to 550 °C, thermally induced creep-fatigue damage is very likely in components including a reactor vessel, reactor internals (interior structures), heat exchangers, pipelines, etc. In this study, structural integrity of the components such as reactor vessel and internals in STELLA-2 has been evaluated against creep-fatigue failures at a concept-design step. As 2D analysis yields far conservative results, a realistic 3D simulation is performed by a commercial software. A design integrity guarding against a creep-fatigue damage failure operating at high temperature was evaluated for the reactor vessel with its internal structure of the STELLA-2. Both the high temperature design codes were used for the evaluation, and results were compared. All the results showed the vessel as a whole is safely designed at the given operating conditions, while the ASME-NH gives a conservative evaluation

Creep-Fatigue Damage Evaluation of a Model Reactor Vessel and Reactor Internals of Sodium Test Facility according to ASME-NH and RCC-MRx Codes

Energy Technology Data Exchange (ETDEWEB)

Lim, Dong-Won; Lee, Hyeong-Yeon; Eoh, Jae-Hyuk; Son, Seok-Kwon; Kim, Jong-Bum; Jeong, Ji-Young [KAERI, Daejeon (Korea, Republic of)

2016-05-15

The objective of the STELLA-2 is to support the specific design approval for PGSFR by synthetic reviews of key safety issues and code validations through the integral effect tests. Due to its high temperature operation in SFRs (and in a testing facility) up to 550 °C, thermally induced creep-fatigue damage is very likely in components including a reactor vessel, reactor internals (interior structures), heat exchangers, pipelines, etc. In this study, structural integrity of the components such as reactor vessel and internals in STELLA-2 has been evaluated against creep-fatigue failures at a concept-design step. As 2D analysis yields far conservative results, a realistic 3D simulation is performed by a commercial software. A design integrity guarding against a creep-fatigue damage failure operating at high temperature was evaluated for the reactor vessel with its internal structure of the STELLA-2. Both the high temperature design codes were used for the evaluation, and results were compared. All the results showed the vessel as a whole is safely designed at the given operating conditions, while the ASME-NH gives a conservative evaluation.

Recent trends in fracture and damage mechanics

CERN Document Server

Zybell, Lutz

2016-01-01

This book covers a wide range of topics in fracture and damage mechanics. It presents historical perspectives as well as recent innovative developments, presented by peer reviewed contributions from internationally acknowledged authors.  The volume deals with the modeling of fracture and damage in smart materials, current industrial applications of fracture mechanics, and it explores advances in fracture testing methods. In addition, readers will discover trends in the field of local approach to fracture and approaches using analytical mechanics. Scholars in the fields of materials science, engineering and computational science will value this volume which is dedicated to Meinhard Kuna on the occasion of his 65th birthday in 2015. This book incorporates the proceedings of an international symposium that was organized to honor Meinhard Kuna’s contributions to the field of theoretical and applied fracture and damage mechanics.

Does internal climate variability overwhelm climate change signals in streamflow? The upper Po and Rhone basin case studies.

Science.gov (United States)

Fatichi, S; Rimkus, S; Burlando, P; Bordoy, R

2014-09-15

Projections of climate change effects in streamflow are increasingly required to plan water management strategies. These projections are however largely uncertain due to the spread among climate model realizations, internal climate variability, and difficulties in transferring climate model results at the spatial and temporal scales required by catchment hydrology. A combination of a stochastic downscaling methodology and distributed hydrological modeling was used in the ACQWA project to provide projections of future streamflow (up to year 2050) for the upper Po and Rhone basins, respectively located in northern Italy and south-western Switzerland. Results suggest that internal (stochastic) climate variability is a fundamental source of uncertainty, typically comparable or larger than the projected climate change signal. Therefore, climate change effects in streamflow mean, frequency, and seasonality can be masked by natural climatic fluctuations in large parts of the analyzed regions. An exception to the overwhelming role of stochastic variability is represented by high elevation catchments fed by glaciers where streamflow is expected to be considerably reduced due to glacier retreat, with consequences appreciable in the main downstream rivers in August and September. Simulations also identify regions (west upper Rhone and Toce, Ticino river basins) where a strong precipitation increase in the February to April period projects streamflow beyond the range of natural climate variability during the melting season. This study emphasizes the importance of including internal climate variability in climate change analyses, especially when compared to the limited uncertainty that would be accounted for by few deterministic projections. The presented results could be useful in guiding more specific impact studies, although design or management decisions should be better based on reliability and vulnerability criteria as suggested by recent literature. Copyright © 2013

Non-linear Heart Rate Variability as a Discriminator of Internalizing Psychopathology and Negative Affect in Children With Internalizing Problems and Healthy Controls

Directory of Open Access Journals (Sweden)

Charlotte Fiskum

2018-05-01

Full Text Available Background: Internalizing psychopathology and dysregulated negative affect are characterized by dysregulation in the autonomic nervous system and reduced heart rate variability (HRV due to increases in sympathetic activity alongside reduced vagal tone. The neurovisceral system is however, a complex nonlinear system, and nonlinear indices related to psychopathology are so far less studied in children. Essential nonlinear properties of a system can be found in two main domains: the informational domain and the invariant domain. sample entropy (SampEn is a much-used method from the informational domain, while detrended fluctuation analysis (DFA represents a widely-used method from the invariant domain. To see if nonlinear HRV can provide information beyond linear indices of autonomic activation, this study investigated SampEn and DFA as discriminators of internalizing psychopathology and negative affect alongside measures of vagally-mediated HRV and sympathetic activation.Material and Methods: Thirty-Two children with internalizing difficulties and 25 healthy controls (aged 9–13 were assessed with the Child Behavior Checklist and the Early Adolescent Temperament Questionnaire, Revised, giving an estimate of internalizing psychopathology, negative affect and effortful control, a protective factor against psychopathology. Five minute electrocardiogram and impedance cardiography recordings were collected during a resting baseline, giving estimates of SampEn, DFA short-term scaling exponent α1, root mean square of successive differences (RMSSD, and pre-ejection period (PEP. Between-group differences and correlations were assessed with parametric and non-parametric tests, and the relationships between cardiac variables, psychopathology and negative affect were assessed using generalized linear modeling.Results: SampEn and DFA were not significantly different between the groups. SampEn was weakly negatively related to heart rate (HR in the controls

A linear model of ductile plastic damage

International Nuclear Information System (INIS)

Lemaitre, J.

1983-01-01

A three-dimensional model of isotropic ductile plastic damage based on a continuum damage variable on the effective stress concept and on thermodynamics is derived. As shown by experiments on several metals and alloys, the model, integrated in the case of proportional loading, is linear with respect to the accumulated plastic strain and shows a large influence of stress triaxiality [fr

Influence of Education on Disease Activity and Damage in Systemic Lupus Erythematosus: Data From the 1000 Canadian Faces of Lupus.

Science.gov (United States)

George, Angela; Wong-Pak, Andrew; Peschken, Christine A; Silverman, Earl; Pineau, Christian; Smith, C Douglas; Arbillaga, Hector; Zummer, Michel; Bernatsky, Sasha; Hudson, Marie; Hitchon, Carol; Fortin, Paul R; Nevskaya, Tatiana; Pope, Janet E

2017-01-01

To determine whether socioeconomic status assessed by education is associated with disease activity and the risk of organ damage in systemic lupus erythematosus (SLE). Data from the 1000 Canadian Faces of Lupus, a multicenter database of adult SLE patients, was used to compare education as either low (did not complete high school) or high (completed high school or further) for disease activity and damage. Education was also studied as a continuous variable. The relationships between education and SLE outcomes (any organ damage defined as a Systemic Lupus International Collaborating Clinics/American College of Rheumatology Damage Index [SDI] score ≥1, serious organ damage [SDI score ≥3], and end-stage renal disease) were evaluated using logistic regression analyses adjusted for age, sex, race/ethnicity, and disease duration. A total of 562 SLE patients met inclusion criteria (mean age 47 years, 91% female, and mean disease duration of 10 years); 81% had high education. The low education group was twice as likely to be work disabled (30%; P education was significantly associated with higher disease activity at enrollment into the 1000 Canadian Faces of Lupus database, after adjustment for age (at entry and at diagnosis), race/ethnicity, and sex (B 1.255 + 0.507 [SE], β = 0.115, P = 0.014). In our adjusted logistic regression models we were unable to demonstrate significant associations between education and SLE damage. Results did not change when varying the education variable. In this cohort, low education was associated cross-sectionally with higher disease activity and work disability, but not damage. © 2016, American College of Rheumatology.

A class of constitutive relations with internal variable derivatives. Derivation from homogenization and initial value problem

International Nuclear Information System (INIS)

Andrieux, S.; Joussemet, M.; Lorentz, E.

1996-01-01

A general framework for deriving and using a class of constitutive laws incorporating spatial gradients of internal variables is presented. It uses two basic ingredients: a derivation of such models by homogenization techniques and a reformulation of the evolution equation at the scale of the whole structure. (orig.)

Analysis of core damage frequency from internal events: Surry, Unit 1

International Nuclear Information System (INIS)

Harper, F.T.

1986-11-01

This document contains the accident sequence analyses for Surry, Unit 1; one of the reference plants being examined as part of the NUREG-1150 effort by the Nuclear Regulatory Commission (NRC). NUREG-1150 will document the risk of a selected group of nuclear power plants. As part of that work, this report contains the overall core damage frequency estimate for Surry, Unit 1, and the accompanying plant damage state frequencies. Sensitivity and uncertainty analyses provide additional insights regarding the dominant contributors to the Surry core damage frequency estimate. The numerical results are driven to some degree by modeling assumptions and data selection for issues such as reactor coolant pump seal LOCAs, common cause failure probabilities, and plant response to station blackout and loss of electrical bust initiators. The sensitivity studies explore the impact of alternate theories and data on these issues

Non-classical nonlinear feature extraction from standard resonance vibration data for damage detection.

Science.gov (United States)

Eiras, J N; Monzó, J; Payá, J; Kundu, T; Popovics, J S

2014-02-01

Dynamic non-classical nonlinear analyses show promise for improved damage diagnostics in materials that exhibit such structure at the mesoscale, such as concrete. In this study, nonlinear non-classical dynamic material behavior from standard vibration test data, using pristine and frost damaged cement mortar bar samples, is extracted and quantified. The procedure is robust and easy to apply. The results demonstrate that the extracted nonlinear non-classical parameters show expected sensitivity to internal damage and are more sensitive to changes owing to internal damage levels than standard linear vibration parameters.

Damage Stability Assessment of an HSC after Grounding

DEFF Research Database (Denmark)

Ravn, Erik Sonne; Simonsen, Bo Cerup; Baatrup, Jan

2000-01-01

Currently a substantial effort is done within the International Maritime Organisation (IMO) on revision of the High Speed Craft (HSC) Code. A main issue is the extent of bottom damage and raking damage due to grounding on hard rocks and the corresponding requirements to the damage stability...... of the vessel. It has been found that high-speed craft can experience a damage length up to 100% of the ship length. It has, however, also been argued that the damage stability requirements should reflect the size and probability of the damage with a reduction of the demand for the largest damages.......In the present paper a detailed grounding and damage stability analysis is carried out for two specific HSC, a mono-hull (86 m) and a catamaran (69 m). First various grounding scenarios are considered with different values of the forward speed and ground geometry. The results indicate that 100% bottom damage...

A new survey tool to assess pluvial damage to residential buildings

Science.gov (United States)

Rözer, Viktor; Spekkers, Matthieu; ten Veldhuis, Marie-Claire; Kreibich, Heidi

2017-04-01

Pluvial floods have caused severe damage to urban dwellings in Europe and elsewhere in recent years. These type of flood events are caused by storm events with exceptionally high rainfall rates, which lead to inundation of streets and buildings and are commonly associated with a failure of the urban drainage system. Therefore, pluvial floods often happen with little warning and in areas that are not obviously prone to flooding. With a predicted increase in extreme weather events as well as an ongoing urbanization, pluvial flood damage is expected to increase in the future. So far little research was done on the adverse consequences of pluvial floods, as empirical damage data of pluvial flooding is scarce. Therefore, a newly developed survey tool to assess pluvial flood damage as well as the results of a comparison between two international pluvial flood case studies are presented. The questionnaire used in the two study areas was developed with the aim to create a harmonized transnational pluvial flood damage survey that can potentially be extended to other European countries. New indicator variables have been developed to account for different national and regional standards in building structure, early warning, socio-economic data and recovery. The surveys comprise interviews with 510 households in the Münster area (Germany) and 349 households in Amsterdam (the Netherlands), which were affected by the heavy rainfall events on July 28 2014. The respondents were asked more than 80 questions about the damage to their building structure and contents, as well as on topics such as early warning, emergency and precautionary measures, building properties and hazard characteristics. A comparison of the two surveys revealed strong similarities concerning damage reducing effects and the popularity of precautionary measures, besides significant differences between the mean water levels inside the house as well as the median of the building structure and content damage. A

Quantification of damage and fatigue life under random loading

Directory of Open Access Journals (Sweden)

Sahnoun ZENGAH

2017-12-01

Full Text Available The fatigue of components and structures under real stress is a very complex process that appears at the grain scale. The present work is to highlight a variable loading fatigue life prediction process using the Rain-flow cycle count method and cumulative damage models. Four damage cumulative models are retained and used to estimate the lifetime and to evaluate the indicator of the damage (D namely: the model Miner, the model of the damaged stress "DSM", the theory unified and finally Henry's law.

Integrated analysis considered mitigation cost, damage cost and adaptation cost in Northeast Asia

Science.gov (United States)

Park, J. H.; Lee, D. K.; Kim, H. G.; Sung, S.; Jung, T. Y.

2015-12-01

Various studies show that raising the temperature as well as storms, cold snap, raining and drought caused by climate change. And variety disasters have had a damage to mankind. The world risk report(2012, The Nature Conservancy) and UNU-EHS (the United Nations University Institute for Environment and Human Security) reported that more and more people are exposed to abnormal weather such as floods, drought, earthquakes, typhoons and hurricanes over the world. In particular, the case of Korea, we influenced by various pollutants which are occurred in Northeast Asian countries, China and Japan, due to geographical meteorological characteristics. These contaminants have had a significant impact on air quality with the pollutants generated in Korea. Recently, around the world continued their effort to reduce greenhouse gas and to improve air quality in conjunction with the national or regional development goals priority. China is also working on various efforts in accordance with the international flows to cope with climate change and air pollution. In the future, effect of climate change and air quality in Korea and Northeast Asia will be change greatly according to China's growth and mitigation policies. The purpose of this study is to minimize the damage caused by climate change on the Korean peninsula through an integrated approach taking into account the mitigation and adaptation plan. This study will suggest a climate change strategy at the national level by means of a comprehensive economic analysis of the impacts and mitigation of climate change. In order to quantify the impact and damage cost caused by climate change scenarios in a regional scale, it should be priority variables selected in accordance with impact assessment of climate change. The sectoral impact assessment was carried out on the basis of selected variables and through this, to derive the methodology how to estimate damage cost and adaptation cost. And then, the methodology was applied in Korea

Civil Liability for Environmental Damages

Directory of Open Access Journals (Sweden)

Daniela Ciochină

2012-05-01

Full Text Available We debated in this article the civil liability for environmental damages as stipulated in ourlegislation with reference to Community law. The theory of legal liability in environmental law is basedon the duty of all citizens to respect and protect the environment. Considering the importance ofenvironment in which we live, the liability for environmental damages is treated by the Constitution as aprinciple and a fundamental obligation. Many human activities cause environmental damages and, in linewith the principle of sustainable development, they should be avoided. However, when this is notpossible, they must be regulated (by criminal or administrative law in order to limit their adverse effectsand, according to the polluter pays principle, to internalize in advance their externalities (through taxes,insurances or other forms of financial security products. Communication aims to analyze these issues andlegal regulations dealing with the issue of liability for environmental damage.

The Use of Sphere Indentation Experiments to Characterize Ceramic Damage Models

Science.gov (United States)

2011-09-01

cracking patterns ob- served in spherical indentation data indirectly quantify microheterogeneity. The evolution of damage in ceramics due to projectile...Kayenta model’s damage evolution and variability parameters. Figure 5 illustrates the relationship between the model implementation of variability...Materials by Design, ed., J. W. McCauley. Vol. 134, 11–18. Ceramic Transactions, Cocoa Beach, FL, 2002. 3. G. E. Hauver, et al. Interface Defeat of Long-Rod

Short-term blood pressure variability over 24 h and target organ damage in middle-aged men and women.

LENUS (Irish Health Repository)

Madden, J M

2015-03-19

Blood pressure variability (BPV) has been associated with cardiovascular events; however, the prognostic significance of short-term BPV remains uncertain. As uncertainty also remains as to which measure of variability most accurately describes short-term BPV, this study explores different indices and investigates their relationship with subclinical target organ damage (TOD). We used data from the Mitchelstown Study, a cross-sectional study of Irish adults aged 47-73 years (n=2047). A subsample (1207) underwent 24-h ambulatory BP monitoring (ABPM). As measures of short-term BPV, we estimated the s.d., weighted s.d. (wSD), coefficient of variation (CV) and average real variability (ARV). TOD was documented by microalbuminuria and electrocardiogram (ECG) left ventricular hypertrophy (LVH). There was no association found between any measure of BPV and LVH in both unadjusted and fully adjusted logistic regression models. Similar analysis found that ARV (24 h, day and night), s.d. (day and night) and wSD were all univariately associated with microalbuminuria and remained associated after adjustment for age, gender, smoking, body mass index (BMI), diabetes and antihypertensive treatment. However, when the models were further adjusted for the mean BP the association did not persist for all indices. Our findings illustrate choosing the appropriate summary measure, which accurately captures that short-term BPV is difficult. Despite discrepancies in values between the different measures, there was no association between any indexes of variability with TOD measures after adjustment for the mean BP.Journal of Human Hypertension advance online publication, 19 March 2015; doi:10.1038\\/jhh.2015.18.

Iron status and its relations with oxidative damage and bone loss during long-duration space flight on the International Space Station.

Science.gov (United States)

Zwart, Sara R; Morgan, Jennifer L L; Smith, Scott M

2013-07-01

Increases in stored iron and dietary intake of iron during space flight have raised concern about the risk of excess iron and oxidative damage, particularly in bone. The objectives of this study were to perform a comprehensive assessment of iron status in men and women before, during, and after long-duration space flight and to quantify the association of iron status with oxidative damage and bone loss. Fasting blood and 24-h urine samples were collected from 23 crew members before, during, and after missions lasting 50 to 247 d to the International Space Station. Serum ferritin and body iron increased early in flight, and transferrin and transferrin receptors decreased later, which indicated that early increases in body iron stores occurred through the mobilization of iron to storage tissues. Acute phase proteins indicated no evidence of an inflammatory response during flight. Serum ferritin was positively correlated with the oxidative damage markers 8-hydroxy-2'-deoxyguanosine (r = 0.53, P < 0.001) and prostaglandin F2α (r = 0.26, P < 0.001), and the greater the area under the curve for ferritin during flight, the greater the decrease in bone mineral density in the total hip (P = 0.031), trochanter (P = 0.006), hip neck (P = 0.044), and pelvis (P = 0.049) after flight. Increased iron stores may be a risk factor for oxidative damage and bone resorption.

Climatology and internal variability in a 1000-year control simulation with the coupled climate model ECHO-G

Energy Technology Data Exchange (ETDEWEB)

Min, S.K.; Hense, A. [Bonn Univ. (Germany). Meteorologisches Inst.; Legutke, S.; Kwon, W.T. [Korea Meteorological Administration, Seoul (Korea). Meteorological Research Inst.

2004-03-01

The climatology and internal variability in a 1000-year control simulation of the coupled atmosphere-ocean global climate model ECHO-G are analyzed and compared with observations and other coupled climate model simulations. ECHO-G requires annual mean flux corrections for heat and freshwater in order to simulate no climate drift for 1000 years, but no flux corrections for momentum. The ECHO-G control run captures well most aspects of the observed seasonal and annual climatology and of the interannual to decadal variability. Model biases are very close to those in ECHAM4 stand-alone integrations with prescribed observed sea surface temperature. A trend comparison between observed and modeled near surface temperatures shows that the observed global warming at near surface level is beyond the range of internal variability produced by ECHO-G. The simulated global mean near surface temperatures, however, show a two-year spectral peak which is linked with a strong biennial bias of energy in the ENSO signal. Consequently, the interannual variability (3-9 years) is underestimated. The overall ENSO structure such as the tropical SST climate and its seasonal cycle, a single ITCZ in the eastern tropical Pacific, and the ENSO phase-locking to the annual cycle are simulated reasonably well by ECHO-G. However, the amplitude of SST variability is overestimated in the eastern equatorial pacific and the observed westward propagation of zonal wind stress over the equatorial pacific is not captured by the model. ENSO-related teleconnection patterns of near surface temperature, precipitation, and mean sea level pressure are reproduced realistically. The station-based NAO index in the model exhibits a 'white' noise spectrum similar to the observed and the NAO-related patterns of near surface temperature, precipitation, and mean sea level pressure are also simulated successfully. However, the model overestimates the additional warming over the north pacific in the high index

Liability for damage to the global commons

International Nuclear Information System (INIS)

Leigh, K.

1993-01-01

The 'global commons' discussed in this paper are the areas beyond the limits of national jurisdiction. Responsibility to prevent environmental damage to these areas is clearly recognized in customary international law. On the other hand, although liability for such damage undoubtedly has a useful role to play in protecting these areas, the precise nature of liability for such damage is unclear. Some issues, such as whether liability for such damage is strict or tied to breaching a standard of care and the definition of environmental damage, equally arise in relation to damage to the environment of States. Others, such as who could take action to enforce the liability and the nature of the remedy, raise special problems in the case of damage to the global commons. The work under way in the IAEA Standing Committee on Liability for Nuclear Damage provides an opportunity for clarifying these issues in relation to nuclear damage to the global commons. Treaties dealing with particular types of damage which have recently been adopted or are currently being developed in other fields provide a starting point in dealing with this matter. More work, however, needs to be done

Mesoscopic analysis of drying shrinkage damage in a cementitious material

DEFF Research Database (Denmark)

Moonen, P.; Pedersen, R.R.; Simone, A.

2008-01-01

Concrete and cement-based materials exhibit shrinkage when exposed to drying. Structural effects and inhomogeneity of material properties adverse free shrinkage, hereby inducing stress concentrations and possibly damage. In this contribution, the magnitude of shrinkage- induced damage during...... temperatures are considered: 35 °C and 50 °C. Significantly more micro-damage and higher internal stresses are found for the latter, revealing the importance of drying shrinkage damage, even at laboratory scale....

Damaged Self-Esteem is Associated with Internalizing Problems.

Science.gov (United States)

Creemers, Daan H M; Scholte, Ron H J; Engels, Rutger C M E; Prinstein, Mitchell J; Wiers, Reinout W

2013-01-01

Implicit and explicit self-esteem are assumed to be important factors in understanding the onset and maintenance of psychological problems. The current study aims to examine the association between implicit and explicit self-esteem and their interaction with depressive symptoms, suicidal ideation, and loneliness. Specifically, the relationship between the size and the direction of the discrepancy between implicit and explicit self-esteem with depressive symptoms, suicidal ideation, and loneliness were examined. Participants were 95 young female adults (M = 21.2 years, SD = 1.88) enrolled in higher education. We administered the IAT to assess implicit self-esteem, and the Rosenberg self-esteem scale to measure explicit self-esteem while psychological problems were assessed through self-reports. Results showed that discrepancies between implicit and explicit self-esteem were positively associated with depressive symptoms, suicidal ideation, and loneliness. In addition, the direction of the discrepancy was specifically relevant: damaged self-esteem (i.e., high implicit self-esteem and low explicit self-esteem) was consistently associated with increased levels of depressive symptoms, suicidal ideation, and loneliness. In contrast, defensive or fragile self-esteem (i.e., low implicit and high explicit self-esteem) was solely associated with loneliness. These findings provide further support that specifically damaged self-esteem is an important vulnerability marker for depressive symptoms, suicidal ideation, and loneliness.

Damaged Self-Esteem is Associated with Internalizing Problems

Science.gov (United States)

Creemers, Daan H. M.; Scholte, Ron H. J.; Engels, Rutger C. M. E.; Prinstein, Mitchell J.; Wiers, Reinout W.

2013-01-01

Implicit and explicit self-esteem are assumed to be important factors in understanding the onset and maintenance of psychological problems. The current study aims to examine the association between implicit and explicit self-esteem and their interaction with depressive symptoms, suicidal ideation, and loneliness. Specifically, the relationship between the size and the direction of the discrepancy between implicit and explicit self-esteem with depressive symptoms, suicidal ideation, and loneliness were examined. Participants were 95 young female adults (M = 21.2 years, SD = 1.88) enrolled in higher education. We administered the IAT to assess implicit self-esteem, and the Rosenberg self-esteem scale to measure explicit self-esteem while psychological problems were assessed through self-reports. Results showed that discrepancies between implicit and explicit self-esteem were positively associated with depressive symptoms, suicidal ideation, and loneliness. In addition, the direction of the discrepancy was specifically relevant: damaged self-esteem (i.e., high implicit self-esteem and low explicit self-esteem) was consistently associated with increased levels of depressive symptoms, suicidal ideation, and loneliness. In contrast, defensive or fragile self-esteem (i.e., low implicit and high explicit self-esteem) was solely associated with loneliness. These findings provide further support that specifically damaged self-esteem is an important vulnerability marker for depressive symptoms, suicidal ideation, and loneliness. PMID:23565101

Damaged Self-Esteem is Associated with Internalizing Problems

Directory of Open Access Journals (Sweden)

Daan eCreemers

2013-04-01

Full Text Available Implicit and explicit self-esteem are assumed to be important factors in understanding the onset and maintenance of psychological problems. The current study aims to examine the association between implicit and explicit self-esteem and their interaction with depressive symptoms, suicidal ideation and loneliness. Specifically, the relationship between the size and the direction of the discrepancy between implicit and explicit self-esteem with depressive symptoms, suicidal ideation and loneliness were examined. Participants were 95 young female adults (M= 21.2 years, SD = 1.88 enrolled in higher education. We administered the IAT to assess implicit self-esteem, and the Rosenberg self-esteem scale to measure explicit self-esteem while psychological problems were assessed through self-reports. Results showed that discrepancies between implicit and explicit self-esteem were positively associated with depressive symptoms, suicidal ideation, and loneliness. In addition, the direction of the discrepancy was specifically relevant: damaged self-esteem (i.e., high implicit self-esteem and low explicit self-esteem was consistently associated with increased levels of depressive symptoms, suicidal ideation, and loneliness. In contrast, defensive or fragile self-esteem (i.e., low implicit and high explicit self-esteem was solely associated with loneliness. These findings provide further support that specifically damaged self-esteem is an important vulnerability marker for depressive symptoms, suicidal ideation, and loneliness.

Constraint-Led Changes in Internal Variability in Running

OpenAIRE

Haudum, Anita; Birklbauer, Jürgen; Kröll, Josef; Müller, Erich

2012-01-01

We investigated the effect of a one-time application of elastic constraints on movement-inherent variability during treadmill running. Eleven males ran two 35-min intervals while surface EMG was measured. In one of two 35-min intervals, after 10 min of running without tubes, elastic tubes (between hip and heels) were attached, followed by another 5 min of running without tubes. To assess variability, stride-to-stride iEMG variability was calculated. Significant increases in variability (36 % ...

Numerical study of the EDZ by a thermo-hydro-mechanical damage model dedicated to unsaturated geo-materials

International Nuclear Information System (INIS)

Arson, Chloe; Gatmiri, Behrouz

2010-01-01

Document available in extended abstract form only. The design of deep nuclear waste repositories requires the modelling of the effects of thermal loadings in the Excavation Damaged Zone (EDZ). The containers are to be stored in bentonite buffers surrounded by a geological massif. These two barriers are multi-phase porous media, in which coupled mechanical, capillary and thermal phenomena occur. The aim of this study is to develop a new damage model dedicated to non-isothermal unsaturated porous media, the 'THHMD' model. Contrary to almost all of the existing damage models dedicated to non dry media, it is formulated in independent stress state variables (net stress, suction and thermal stress). The damage variable is a second-order tensor, which gives a good approximation for the representation of anisotropic cracking in three dimensions. The behaviour laws stem from the combination of phenomenological and micromechanical principles. The total strain tensor is split into three components, each of which being conjugated to a stress state variable. The Helmholtz free energy is written as the sum of damaged elastic energies and residual-strain-potentials. The concept of effective stress, frequently used in Continuum Damaged Mechanics, is extended to the three stress state variables, by using the operator of Cordebois and Sidoroff. The damaged rigidities are computed by application of the Principle of Equivalent Elastic Energy (PEEE). The non-elastic strain components depend on the increment of damage, which is determined by an associative flow rule. Fracturing is also modelled in the transfer equations. The Representative Elementary Volume (REV) is assumed to be damaged by a microcrack network, among which liquid water and vapour flows are homogenized. A damaged intrinsic conductivity, which plays the role of an internal length parameter, is introduced. The influence of damage on air and heat flows is taken into account by means of porosity, which is also

Civil liability for nuclear damage

International Nuclear Information System (INIS)

1963-01-01

An international Convention on Civil Liability for Nuclear Damage was adopted in Vienna on 19 May 1963 by a sixty-nation conference convened by the International Atomic Energy Agency. The Convention, which is subject to ratification by the States signing it, will come into force three months after the deposit of the fifth instrument of ratification. The Convention is designee only to establish minimum rules regarding civil liability for nuclear damage; it may thus well be described as a framework convention, the main provisions of which represent the essential common denomination acceptable to as many States as possible. It leaves wide scope for national legislation and regional arrangements with a view to implementing these provisions The Convention does not purport to create a uniform civil law in this field, but it contains the minimal essential for protection of the public and forms the legal basis for uniform world-wide liability rules

Multiple and variable NHEJ-like genes are involved in resistance to DNA damage in Streptomyces ambofaciens

Directory of Open Access Journals (Sweden)

Grégory Hoff

2016-11-01

Full Text Available Non homologous end-joining (NHEJ is a double strand break (DSB repair pathway which does not require any homologous template and can ligate two DNA ends together. The basic bacterial NHEJ machinery involves two partners: the Ku protein, a DNA end binding protein for DSB recognition and the multifunctional LigD protein composed a ligase, a nuclease and a polymerase domain, for end processing and ligation of the broken ends. In silico analyses performed in the 38 sequenced genomes of Streptomyces species revealed the existence of a large panel of NHEJ-like genes. Indeed, ku genes or ligD domain homologues are scattered throughout the genome in multiple copies and can be distinguished in two categories: the core NHEJ gene set constituted of conserved loci and the variable NHEJ gene set constituted of NHEJ-like genes present in only a part of the species. In Streptomyces ambofaciens ATCC 23877, not only the deletion of core genes but also that of variable genes led to an increased sensitivity to DNA damage induced by electron beam irradiation. Multiple mutants of ku, ligase or polymerase encoding genes showed an aggravated phenotype compared to single mutants. Biochemical assays revealed the ability of Ku-like proteins to protect and to stimulate ligation of DNA ends. RT-qPCR and GFP fusion experiments suggested that ku-like genes show a growth phase dependent expression profile consistent with their involvement in DNA repair during spores formation and/or germination.

The concept of ''pollution damage'' in the maritime conventions governing liability and compensation for oil spills

International Nuclear Information System (INIS)

Jacobsson, M.

2000-01-01

Compensation for pollution damage caused by spills from oil tankers is governed by an international regime elaborated under the auspices of the International Maritime Organization (I.M.O.). The framework for the regime was originally by the 1969 International Convention on Civil Liability for Oil Pollution Damage (1969 Civil liability convention) and the 1971 International Convention on the Establishment of an International Fund for Compensation for Oil Pollution Damage (1971 Fund Convention). This old regime was amended in 1992 by two protocols, and the amended Conventions are known as 1992 Civil Liability Convention and the 1992 Fund Convention. The Civil Liability conventions govern the liability of ship-owners for oil pollution damage. The Conventions lay down the principle of strict liability for ship-owners and create a system of compulsory liability insurance. The ship-owner is normally entitled to limit his liability to an amount which is linked to the tonnage of his ship. The regime of liability and the funds created by the 1971 and 1992 Conventions are analyzed in detail. Are studied as following: the concepts of pollution damage and the safeguard measures or preventive measures, the question of receivability for compensation demands (damage to properties, cleansing operations, costs, economic loss). The question of compensation conditions for the only economic loss and the damage to environment are tackled. This expose is concluded by enlightening the contribution brought by the previously named Conventions to the International law about the civil liability. (N.C.)

Development of integrated damage detection system for international America's Cup class yacht structures using a fiber optic distributed sensor

Science.gov (United States)

Akiyoshi, Shimada; Naruse, Hiroshi; Uzawa, Kyoshi; Murayama, Hideaki; Kageyama, Kazuro

2000-06-01

We constructed a new health monitoring system to detect damage using a fiber optic distributed sensor, namely a Brillouin optical time domain reflectometer (BOTDR), and installed it in International America's Cup Class (IACC) yachts, the Japanese entry in America's Cup 2000. IACC yachts are designed to be as fast as possible, so it is essential that they are lightweight and encounter minimum water resistance. Advanced composite sandwich structures, made with carbon fiber reinforced plastic (CFRP) skins and a honeycomb core, are used to achieve the lightweight structure. Yacht structure designs push the strength of the materials to their limit and so it is important to detect highly stressed or damaged regions that might cause a catastrophic fracture. The BOTDR measures changes in the Brillouin frequency shift caused by distributed strain along one optical fiber. We undertook two experiments: a pulling test and a four point bending test on a composite beam. The former showed that no slippage occurred between the optical fiber glass and its coating. The latter confirmed that a debonding between the skin and the core of 300 mm length could be found with the BOTDR. Next we examined the effectiveness with which this system can assess the structural integrity of IACC yachts. The results show that our system has the potential for use as a damage detection system for smart structures.

Contributions of internal climate variability to mitigation of projected future regional sea level rise

Science.gov (United States)

Hu, A.; Bates, S. C.

2017-12-01

Observations indicate that the global mean surface temperature is rising, so does the global mean sea level. Sea level rise (SLR) can impose significant impacts on island and coastal communities, especially when SLR is compounded with storm surges. Here, via analyzing results from two sets of ensemble simulations from the Community Earth System Model version 1, we investigate how the potential SLR benefits through mitigating the future emission scenarios from business as usual to a mild-mitigation over the 21st Century would be affected by internal climate variability. Results show that there is almost no SLR benefit in the near term due to the large SLR variability due to the internal ocean dynamics. However, toward the end of the 21st century, the SLR benefit can be as much as a 26±1% reduction of the global mean SLR due to seawater thermal expansion. Regionally, the benefits from this mitigation for both near and long terms are heterogeneous. They vary from just a 11±5% SLR reduction in Melbourne, Australia to a 35±6% reduction in London. The processes contributing to these regional differences are the coupling of the wind-driven ocean circulation with the decadal scale sea surface temperature mode in the Pacific and Southern Oceans, and the changes of the thermohaline circulation and the mid-latitude air-sea coupling in the Atlantic.

Anticommuting variables, internal degrees of freedom, and the Wilson loop

International Nuclear Information System (INIS)

Barducci, A.; Casalbuoni, R.; Lusanna, L.

1981-01-01

In this paper we show that is possible to give a real physical meaning to theories in which internal degrees of freedom are described by Grassmann variables. The physical theory is defined by means of an averaging procedure in terms of a distribution function in the Grassmann restricted space satisfying all the physical requirements. If we use this result for a scalar particle with inner degrees of freedom (electric charge, colour, ...) interacting with Yang-Mills gauge fields, it turns out that we can define two different classical theories. Taking the average of the coupled particle-field equations of motion, we recover the usual classical theory. Taking instead the average of the solution of such equations we get a theory which is free from all the classical infinities (and so of the causal defects, like runaway solution or pre-acceleration) but also of all the effects of the same order in the charges (like radiation). The main point is that the processes of averaging and integrating the equations of motion do not commute. Then for the case of colour degrees of freedom we study the quantization of the theory by the path-integral method and we show that the functional integration can be done for an arbitrary gluon field simply by using the classical solution. As a result we obtain an expression for the Wilson loop as a functional integral for the internal fermionic degrees of freedom. (orig.)

7 CFR 51.1560 - Damage.

Science.gov (United States)

2010-01-01

... of defects, which materially detracts from the edible or marketing quality, or the internal or... 7 Agriculture 2 2010-01-01 2010-01-01 false Damage. 51.1560 Section 51.1560 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing...

A thermomechanical constitutive model for cemented granular materials with quantifiable internal variables. Part II - Validation and localization analysis

Science.gov (United States)

Das, Arghya; Tengattini, Alessandro; Nguyen, Giang D.; Viggiani, Gioacchino; Hall, Stephen A.; Einav, Itai

2014-10-01

We study the mechanical failure of cemented granular materials (e.g., sandstones) using a constitutive model based on breakage mechanics for grain crushing and damage mechanics for cement fracture. The theoretical aspects of this model are presented in Part I: Tengattini et al. (2014), A thermomechanical constitutive model for cemented granular materials with quantifiable internal variables, Part I - Theory (Journal of the Mechanics and Physics of Solids, 10.1016/j.jmps.2014.05.021). In this Part II we investigate the constitutive and structural responses of cemented granular materials through analyses of Boundary Value Problems (BVPs). The multiple failure mechanisms captured by the proposed model enable the behavior of cemented granular rocks to be well reproduced for a wide range of confining pressures. Furthermore, through comparison of the model predictions and experimental data, the micromechanical basis of the model provides improved understanding of failure mechanisms of cemented granular materials. In particular, we show that grain crushing is the predominant inelastic deformation mechanism under high pressures while cement failure is the relevant mechanism at low pressures. Over an intermediate pressure regime a mixed mode of failure mechanisms is observed. Furthermore, the micromechanical roots of the model allow the effects on localized deformation modes of various initial microstructures to be studied. The results obtained from both the constitutive responses and BVP solutions indicate that the proposed approach and model provide a promising basis for future theoretical studies on cemented granular materials.

Damage spreading for one-dimensional, non-equilibrium models with parity conserving phase transitions

CERN Document Server

Ódor, G; Odor, Geza; Menyhard, Nora

1998-01-01

The damage spreading (DS) transitions of two one-dimensional stochastic cellular automata suggested by Grassberger (A and B) and the kinetic Ising model of Menyhárd (NEKIM) have been investigated on the level of kinks and spins. On the level of spins the parity conservation is not satisfied and therefore studying these models provides a convenient tool to understand the dependence of DS properties on symmetries. For the model B the critical point and the DS transition point is well separated and directed percolation damage spreading transition universality was found for spin damage as well as for kink damage in spite of the conservation of damage variables modulo 2 in the latter case. For the A stochastic cellular automaton, and the NEKIM model the two transition points coincide with drastic effects on the damage of spin and kink variables showing different time dependent behaviours. While the kink DS transition is continuous and shows regular PC class universality, the spin damage exhibits a discontinuous p...

Constraint-led changes in internal variability in running.

Science.gov (United States)

Haudum, Anita; Birklbauer, Jürgen; Kröll, Josef; Müller, Erich

2012-01-01

We investigated the effect of a one-time application of elastic constraints on movement-inherent variability during treadmill running. Eleven males ran two 35-min intervals while surface EMG was measured. In one of two 35-min intervals, after 10 min of running without tubes, elastic tubes (between hip and heels) were attached, followed by another 5 min of running without tubes. To assess variability, stride-to-stride iEMG variability was calculated. Significant increases in variability (36 % to 74 %) were observed during tube running, whereas running without tubes after the tube running block showed no significant differences. Results show that elastic tubes affect variability on a muscular level despite the constant environmental conditions and underline the nervous system's adaptability to cope with somehow unpredictable constraints since stride duration was unaltered.

Continuum damage mechanics method for fatigue growth of surface cracks

International Nuclear Information System (INIS)

Feng Xiqiao; He Shuyan

1997-01-01

With the background of leak-before-break (LBB) analysis of pressurized vessels and pipes in nuclear plants, the fatigue growth problem of either circumferential or longitudinal semi-elliptical surface cracks subjected to cyclic loading is studied by using a continuum damage mechanics method. The fatigue damage is described by a scalar damage variable. From the damage evolution equation at the crack tip, a crack growth equation similar to famous Paris' formula is derived, which shows the physical meaning of Paris' formula. Thereby, a continuum damage mechanics approach is developed to analyze the configuration evolution of surface cracks during fatigue growth

The Electrical Resistivity and Acoustic Emission Response Law and Damage Evolution of Limestone in Brazilian Split Test

Directory of Open Access Journals (Sweden)

Xinji Xu

2016-01-01

Full Text Available The Brazilian split test was performed on two groups of limestone samples with loading directions vertical and parallel to the bedding plane, and the response laws of the electrical resistivity and acoustic emission (AE in the two loading modes were obtained. The test results showed that the Brazilian split test with loading directions vertical and parallel to the bedding showed obviously different results and anisotropic characteristics. On the basis of the response laws of the electrical resistivity and AE, the damage variables based on the electrical resistivity and AE properties were modified, and the evolution laws of the damage variables in the Brazilian split test with different loading directions were obtained. It was found that the damage evolution laws varied with the loading direction. Specifically, in the time-varying curve of the damage variable with the loading direction vertical to the bedding, the damage variable based on electrical resistivity properties showed an obvious damage weakening stage while that based on AE properties showed an abrupt increase under low load.

Kilometric Scale Modeling of the North West European Shelf Seas: Exploring the Spatial and Temporal Variability of Internal Tides

Science.gov (United States)

Guihou, K.; Polton, J.; Harle, J.; Wakelin, S.; O'Dea, E.; Holt, J.

2018-01-01

The North West European Shelf break acts as a barrier to the transport and exchange between the open ocean and the shelf seas. The strong spatial variability of these exchange processes is hard to fully explore using observations, and simulations generally are too coarse to simulate the fine-scale processes over the whole region. In this context, under the FASTNEt program, a new NEMO configuration of the North West European Shelf and Atlantic Margin at 1/60° (˜1.8 km) has been developed, with the objective to better understand and quantify the seasonal and interannual variability of shelf break processes. The capability of this configuration to reproduce the seasonal cycle in SST, the barotropic tide, and fine-resolution temperature profiles is assessed against a basin-scale (1/12°, ˜9 km) configuration and a standard regional configuration (7 km resolution). The seasonal cycle is well reproduced in all configurations though the fine-resolution allows the simulation of smaller scale processes. Time series of temperature at various locations on the shelf show the presence of internal waves with a strong spatiotemporal variability. Spectral analysis of the internal waves reveals peaks at the diurnal, semidiurnal, inertial, and quarter-diurnal bands, which are only realistically reproduced in the new configuration. Tidally induced pycnocline variability is diagnosed in the model and shown to vary with the spring neap cycle with mean displacement amplitudes in excess of 2 m for 30% of the stratified domain. With sufficiently fine resolution, internal tides are shown to be generated at numerous bathymetric features resulting in a complex pycnocline displacement superposition pattern.

Thermomechanics of solid materials with application to the Gurson-Tvergaard material model

Energy Technology Data Exchange (ETDEWEB)

Santaoja, K. [VTT Manufacturing Technology, Espoo (Finland). Materials and Structural Integrity

1997-12-31

The elastic-plastic material model for porous material proposed by Gurson and Tvergaard is evaluated. First a general description is given of constitutive equations for solid materials by thermomechanics with internal variables. The role and definition of internal variables are briefly discussed and the following definition is given: The independent variables present (possibly hidden) in the basic laws for thermomechanics are called controllable variables. The other independent variables are called internal variables. An internal variable is shown always to be a state variable. This work shows that if the specific dissipation function is a homogeneous function of degree one in the fluxes, a description for a time-independent process is obtained. When damage to materials is evaluated, usually a scalar-valued or tensorial variable called damage is introduced in the set of internal variables. A problem arises when determining the relationship between physically observable weakening of the material and the value for damage. Here a more feasible approach is used. Instead of damage, the void volume fraction is inserted into the set of internal variables. This allows use of an analytical equation for description of the mechanical weakening of the material. An extension to the material model proposed by Gurson and modified by Tvergaard is derived. The derivation is based on results obtained by thermomechanics and damage mechanics. The main difference between the original Gurson-Tvergaard material model and the extended one lies in the definition of the internal variable `equivalent tensile flow stress in the matrix material` denoted by {sigma}{sup M}. Using classical plasticity theory, Tvergaard elegantly derived an evolution equation for {sigma}{sup M}. This is not necessary in the present model, since damage mechanics gives an analytical equation between the stress tensor {sigma} and {sigma}M. Investigation of the Clausius-Duhem inequality shows that in compression

Thermomechanics of solid materials with application to the Gurson-Tvergaard material model

International Nuclear Information System (INIS)

Santaoja, K.

1997-01-01

The elastic-plastic material model for porous material proposed by Gurson and Tvergaard is evaluated. First a general description is given of constitutive equations for solid materials by thermomechanics with internal variables. The role and definition of internal variables are briefly discussed and the following definition is given: The independent variables present (possibly hidden) in the basic laws for thermomechanics are called controllable variables. The other independent variables are called internal variables. An internal variable is shown always to be a state variable. This work shows that if the specific dissipation function is a homogeneous function of degree one in the fluxes, a description for a time-independent process is obtained. When damage to materials is evaluated, usually a scalar-valued or tensorial variable called damage is introduced in the set of internal variables. A problem arises when determining the relationship between physically observable weakening of the material and the value for damage. Here a more feasible approach is used. Instead of damage, the void volume fraction is inserted into the set of internal variables. This allows use of an analytical equation for description of the mechanical weakening of the material. An extension to the material model proposed by Gurson and modified by Tvergaard is derived. The derivation is based on results obtained by thermomechanics and damage mechanics. The main difference between the original Gurson-Tvergaard material model and the extended one lies in the definition of the internal variable 'equivalent tensile flow stress in the matrix material' denoted by σ M . Using classical plasticity theory, Tvergaard elegantly derived an evolution equation for σ M . This is not necessary in the present model, since damage mechanics gives an analytical equation between the stress tensor σ and σM. Investigation of the Clausius-Duhem inequality shows that in compression, states occur which are not

Continuum theory of fibrous tissue damage mechanics using bond kinetics: application to cartilage tissue engineering.

Science.gov (United States)

Nims, Robert J; Durney, Krista M; Cigan, Alexander D; Dusséaux, Antoine; Hung, Clark T; Ateshian, Gerard A

2016-02-06

This study presents a damage mechanics framework that employs observable state variables to describe damage in isotropic or anisotropic fibrous tissues. In this mixture theory framework, damage is tracked by the mass fraction of bonds that have broken. Anisotropic damage is subsumed in the assumption that multiple bond species may coexist in a material, each having its own damage behaviour. This approach recovers the classical damage mechanics formulation for isotropic materials, but does not appeal to a tensorial damage measure for anisotropic materials. In contrast with the classical approach, the use of observable state variables for damage allows direct comparison of model predictions to experimental damage measures, such as biochemical assays or Raman spectroscopy. Investigations of damage in discrete fibre distributions demonstrate that the resilience to damage increases with the number of fibre bundles; idealizing fibrous tissues using continuous fibre distribution models precludes the modelling of damage. This damage framework was used to test and validate the hypothesis that growth of cartilage constructs can lead to damage of the synthesized collagen matrix due to excessive swelling caused by synthesized glycosaminoglycans. Therefore, alternative strategies must be implemented in tissue engineering studies to prevent collagen damage during the growth process.

Contactless Diagnostics of Turbine Blade Vibration and Damage

Czech Academy of Sciences Publication Activity Database

Procházka, Pavel; Vaněk, František

2011-01-01

Roč. 305, č. 1 (2011), s. 1-11 E-ISSN 1742-6596. [International Conference on Damage Assessment of Structures (DAMAS 2011) /9./. Oxford, 11.07.2011-13.07.2011] Institutional research plan: CEZ:AV0Z20760514 Keywords : steam turbine * blade damage assessment * tip-timing method Subject RIV: JL - Materials Fatigue, Friction Mechanics http://iopscience.iop.org/1742-6596/305/1/012116

Electrochemical state and internal variables estimation using a reduced-order physics-based model of a lithium-ion cell and an extended Kalman filter

Energy Technology Data Exchange (ETDEWEB)

Stetzel, KD; Aldrich, LL; Trimboli, MS; Plett, GL

2015-03-15

This paper addresses the problem of estimating the present value of electrochemical internal variables in a lithium-ion cell in real time, using readily available measurements of cell voltage, current, and temperature. The variables that can be estimated include any desired set of reaction flux and solid and electrolyte potentials and concentrations at any set of one-dimensional spatial locations, in addition to more standard quantities such as state of charge. The method uses an extended Kalman filter along with a one-dimensional physics-based reduced-order model of cell dynamics. Simulations show excellent and robust predictions having dependable error bounds for most internal variables. (C) 2014 Elsevier B.V. All rights reserved.

Liability for international nuclear transport: an overview

International Nuclear Information System (INIS)

Brown, O.F.; Horbach, N.

2000-01-01

Many elements can bear on liability for nuclear damage during transport. For example, liability may depend upon a number of facts that may be categorized as follows: shipment, origin or destination of the shipment, deviation from the planed route, temporary storage incidental to carriage; content of shipment, type of nuclear material involved, whether its origin is civilian or defence-related; sites of accident, number and type of territories damaged (i.e. potential conventions involved), applicable territorial limits, exclusive economic zone, high seas, etc.; nature of damages, personal injury, property damage, damage to the means of carriage, indirect damage, preventive measures, environmental cleanup or retrieval at seas, res communis, transboundary damages etc.; victims involved, nationality and domiciles of victims; jurisdiction, flag (for ships) or national registration (for aircraft) of the transporting vessel, courts of one or more states may have (or assert) jurisdiction to hear claims, and may have to determine what law to apply to a particular accident; applicable law, the applicability laws and/or international nuclear liability conventions; the extent to which any applicable convention has been implemented or modified by domestic legislation, conflicts with the 1982 Law of the Sea Convention or other applicable international agreements, and finally, also written agreements between installation operators and carriers can define applicable law as well as responsibilities. Harmonizing nuclear liability protection and applying it to additional international shipments would be facilitated by more countries being in treaty relations with each other as soon as possible. Adherence to an international convention by more countries (including China, Russia, the United States, etc.) would promote the open flow of services and advanced technology, and better facilitate international transport. The conventions protect the public, harmonize legislation in the

Experimental and Modelling Investigations of the Coupled Elastoplastic Damage of a Quasi-brittle Rock

Science.gov (United States)

Zhang, Jiu-Chang

2018-02-01

Triaxial compression tests are conducted on a quasi-brittle rock, limestone. The analyses show that elastoplastic deformation is coupled with damage. Based on the experimental investigation, a coupled elastoplastic damage model is developed within the framework of irreversible thermodynamics. The coupling effects between the plastic and damage dissipations are described by introducing an isotropic damage variable into the elastic stiffness and yield criterion. The novelty of the model is in the description of the thermodynamic force associated with damage, which is formulated as a state function of both elastic and plastic strain energies. The latter gives a full consideration on the comprehensive effects of plastic strain and stress changing processes in rock material on the development of damage. The damage criterion and potential are constructed to determine the onset and evolution of damage variable. The return mapping algorithms of the coupled model are deduced for three different inelastic corrections. Comparisons between test data and numerical simulations show that the coupled elastoplastic damage model is capable of describing the main mechanical behaviours of the quasi-brittle rock.

Investigation on the Effects of Internal EGR by Variable Exhaust Valve Actuation with Post Injection on Auto-ignited Combustion and Emission Performance

Directory of Open Access Journals (Sweden)

Insu Cho

2018-04-01

Full Text Available Variable valve mechanisms are usually applied to a gasoline combustion engine to improve its power performance by controlling the amount of intake air according to the operating load. These mechanisms offer one possibility of resolving the conflict of objectives between a further reduction of raw emissions and an improvement in fuel efficiency. In recent years, variable valve control systems have become extremely important in the diesel combustion engine. Importantly, it has been shown that there are several potential benefits of applying variable valve timing (VVT to a compression ignition engine. Valve train variability could offer one option to achieve the reduction goals of engine-out emissions and fuel consumption. The aim of this study was to investigate the effects on part load combustion and emission performance of internal exhaust gas recirculation (EGR by variable exhaust valve lift actuation using a cam-in-cam system, which is an electronically variable valve device with a variable inside cam retarded to about 30 degrees. Numerical simulation based on GT-POWER has been performed to predict the NOx reduction strategy at the part load operating point of 1200 rpm in a four-valve diesel engine. A GT-POWER model of a common-rail direct injection engine with internal EGR was built and verified with experimental data. As a result, large potential for reducing NOx emissions through the use of exhaust valve control has been identified. Namely, it is possible to utilize heat efficiently as recompression of retarded post injection with downscaled specification of the exhaust valve rather than the intake valve, even if the CIC V1 condition with a reduction of the exhaust valve has a higher internal EGR rate of about 2% compared to that of the CIC V2 condition.

Can oceanic reanalyses be used to assess recent anthropogenic changes and low-frequency internal variability of upper ocean temperature?

Energy Technology Data Exchange (ETDEWEB)

Corre, L.; Terray, L.; Weaver, A. [Cerfacs-CNRS, Toulouse (France); Balmaseda, M. [E.C.M.W.F, Reading (United Kingdom); Ribes, A. [CNRM-GAME, Meteo France-CNRS, Toulouse (France)

2012-03-15

A multivariate analysis of the upper ocean thermal structure is used to examine the recent long-term changes and decadal variability in the upper ocean heat content as represented by model-based ocean reanalyses and a model-independent objective analysis. The three variables used are the mean temperature above the 14 C isotherm, its depth and a fixed depth mean temperature (250 m mean temperature). The mean temperature above the 14 C isotherm is a convenient, albeit simple, way to isolate thermodynamical changes by filtering out dynamical changes related to thermocline vertical displacements. The global upper ocean observations and reanalyses exhibit very similar warming trends (0.045 C per decade) over the period 1965-2005, superimposed with marked decadal variability in the 1970s and 1980s. The spatial patterns of the regression between indices (representative of anthropogenic changes and known modes of internal decadal variability), and the three variables associated with the ocean heat content are used as fingerprint to separate out the different contributions. The choice of variables provides information about the local heat absorption, vertical distribution and horizontal redistribution of heat, this latter being suggestive of changes in ocean circulation. The discrepancy between the objective analysis and the reanalyses, as well as the spread among the different reanalyses, are used as a simple estimate of ocean state uncertainties. Two robust findings result from this analysis: (1) the signature of anthropogenic changes is qualitatively different from those of the internal decadal variability associated to the Pacific Interdecadal Oscillation and the Atlantic Meridional Oscillation, and (2) the anthropogenic changes in ocean heat content do not only consist of local heat absorption, but are likely related with changes in the ocean circulation, with a clear shallowing of the tropical thermocline in the Pacific and Indian oceans. (orig.)

Reliability tests for reactor internals rejuvenation technology

International Nuclear Information System (INIS)

Fujimaki, Katsumi; Hitoki, Yoichi; Otsubo, Toru; Uchiyama, Junichi

1998-01-01

Structural damage due to aging degradation of LWR reactor internals has been reported in several nuclear plants. NUPEC has started a project to test the reliability of the technology for rejuvenating reactor internals which has been funded by the Ministry of International Trade and Industry (MITI) of Japan since 1995. The project follows the policy of a report that the MITI has formally issued in April 1996 summarizing the countermeasures to be considered for aging nuclear plants and equipment. This paper gives an outline of the test plans and results which are directed at preventive maintenance before damage and repair after damage for reactor internals aging degradation. The test results for the replacement methods of ICM housing and BWR core shroud have shown that the methods were reliable and the structural integrity was appropriate based on the evaluation. (author)

Convention on supplementary compensation for nuclear damage

International Nuclear Information System (INIS)

Chinese Nuclear Society, Beijing; U.S. Nuclear Energy Institute

2000-01-01

The Contracting parties recognize the importance of the measures provided in the Vienna Convention on Civil Liability for Nuclear Damage and the Paris Convention on Third party liability in the Field of Nuclear Energy as well as in national legislation on compensation for nuclear damage consistent with the principles of these conventions. The Contracting parties desire to establish a worldwide liability regime to supplement and enhance these measures with a view to increasing the amount of compensation for nuclear damage and encourage regional and global co-operation to promote a higher level of nuclear safety in accordance with the principle of international partnership and solidarity

Development of fusion first-wall radiation damage facilities

International Nuclear Information System (INIS)

McElroy, R.J.; Atkins, T.

1986-11-01

The report describes work performed on the development of fusion-reactor first-wall simulation facilities on the Variable Energy Cyclotron, at Harwell, United Kingdom. Two irradiation facilities have been constructed: i) a device for helium and hydrogen filling up to 1000 ppm for post-irradiation mechanical properties studies, and ii) a helium implantation and damage facility for simultaneous injection of helium and radiation damage into a specimen under stress. These facilities are now fully commissioned and are available for investigations of first-wall radiation damage and for intercorrelation of fission- and fusion -reactor materials behaviour. (U.K.)

Transport properties of damaged materials. Cementitious barriers partnership

Energy Technology Data Exchange (ETDEWEB)

Langton, C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2014-11-01

The objective of the Cementitious Barriers Partnership (CBP) project is to develop tools to improve understanding and prediction of the long-term structural, hydraulic, and chemical performance of cementitious barriers used in low-level waste storage applications. One key concern for the long-term durability of concrete is the degradation of the cementitious matrix, which occurs as a result of aggressive chemical species entering the material or leaching out in the environment, depending on the exposure conditions. The objective of the experimental study described in this report is to provide experimental data relating damage in cementitious materials to changes in transport properties, which can eventually be used to support predictive model development. In order to get results within a reasonable timeframe and to induce as much as possible uniform damage level in materials, concrete samples were exposed to freezing and thawing (F/T) cycles. The methodology consisted in exposing samples to F/T cycles and monitoring damage level with ultrasonic pulse velocity measurements. Upon reaching pre-selected damage levels, samples were tested to evaluate changes in transport properties. Material selection for the study was motivated by the need to get results rapidly, in order to assess the relevance of the methodology. Consequently, samples already available at SIMCO from past studies were used. They consisted in three different concrete mixtures cured for five years in wet conditions. The mixtures had water-to-cement ratios of 0.5, 0.65 and 0.75 and were prepared with ASTM Type I cement only. The results showed that porosity is not a good indicator for damage caused by the formation of microcracks. Some materials exhibited little variations in porosity even for high damage levels. On the other hand, significant variations in tortuosity were measured in all materials. This implies that damage caused by internal pressure does not necessarily create additional pore space in

Transport properties of damaged materials. Cementitious barriers partnership

International Nuclear Information System (INIS)

Langton, C.

2014-01-01

The objective of the Cementitious Barriers Partnership (CBP) project is to develop tools to improve understanding and prediction of the long-term structural, hydraulic, and chemical performance of cementitious barriers used in low-level waste storage applications. One key concern for the long-term durability of concrete is the degradation of the cementitious matrix, which occurs as a result of aggressive chemical species entering the material or leaching out in the environment, depending on the exposure conditions. The objective of the experimental study described in this report is to provide experimental data relating damage in cementitious materials to changes in transport properties, which can eventually be used to support predictive model development. In order to get results within a reasonable timeframe and to induce as much as possible uniform damage level in materials, concrete samples were exposed to freezing and thawing (F/T) cycles. The methodology consisted in exposing samples to F/T cycles and monitoring damage level with ultrasonic pulse velocity measurements. Upon reaching pre-selected damage levels, samples were tested to evaluate changes in transport properties. Material selection for the study was motivated by the need to get results rapidly, in order to assess the relevance of the methodology. Consequently, samples already available at SIMCO from past studies were used. They consisted in three different concrete mixtures cured for five years in wet conditions. The mixtures had water-to-cement ratios of 0.5, 0.65 and 0.75 and were prepared with ASTM Type I cement only. The results showed that porosity is not a good indicator for damage caused by the formation of microcracks. Some materials exhibited little variations in porosity even for high damage levels. On the other hand, significant variations in tortuosity were measured in all materials. This implies that damage caused by internal pressure does not necessarily create additional pore space in

RENAL DAMAGE WITH MALIGNANT NEOPLASMS

Directory of Open Access Journals (Sweden)

I. B. Kolina

2015-01-01

Full Text Available The relationship between renal damage and malignant neoplasms is one of the most actual problems of the medicine of internal diseases. Very often, exactly availability of renal damage determines the forecast of cancer patients. The range of renal pathologies associated with tumors is unusually wide: from the mechanical effect of the tumor or metastases on the kidneys and/or the urinary tract and paraneoplastic manifestations in the form of nephritis or amyloidosis to nephropathies induced with drugs or tumor lysis, etc. Thrombotic complications that develop as a result of exposure to tumor effects, side effects of certain drugs or irradiation also play an important role in the development of the kidney damage. The most frequent variants of renal damage observed in the practice of medical internists (therapists, urologists, surgeons, etc., as well as methods of diagnosis and treatment approaches are described in the article. Timely and successful prevention and treatment of tumor-associated nephropathies give hope for retaining renal functions, therefore, a higher life standard after completion of anti-tumor therapy. Even a shortterm episode of acute renal damage suffered by a cancer patient must be accompanied with relevant examination and treatment. In the caseof transformation of acute renal damage into the chronic kidney disease, such patients need systematic and weighted renoprotective therapy and correct dosing of nephrotoxic drugs.

Single cell adhesion strength assessed with variable-angle total internal reflection fluorescence microscopy

Directory of Open Access Journals (Sweden)

Marcelina Cardoso Dos Santos

2017-06-01

Full Text Available We propose a new strategy to evaluate adhesion strength at the single cell level. This approach involves variable-angle total internal reflection fluorescence microscopy to monitor in real time the topography of cell membranes, i.e. a map of the membrane/substrate separation distance. According to the Boltzmann distribution, both potential energy profile and dissociation energy related to the interactions between the cell membrane and the substrate were determined from the membrane topography. We have highlighted on glass substrates coated with poly-L-lysine and fibronectin, that the dissociation energy is a reliable parameter to quantify the adhesion strength of MDA-MB-231 motile cells.

Quantification and localization of internal pipe damage

NARCIS (Netherlands)

Vogelaar, B.B.S.A.; Golombok, M.

2016-01-01

Internal pipeline defects are detectable and locatable from guided acoustic wave reflections using sensors mounted on the outer wall of a pipe. We demonstrate pipeline integrity monitoring with only two single acoustic sensors. Multi-mode dispersion imaging of shear displacement shows that the pure

Investigation of a rotary valving system with variable valve timing for internal combustion engines

Science.gov (United States)

Cross, Paul C.; Hansen, Craig N.

1994-11-01

The objective of the program was to provide a functional demonstration of the Hansen Rotary Valving System with Variable Valve Timing (HRVS/VVT), capable of throttleless inlet charge control, as an alternative to conventional poppet-valves for use in spark ignited internal combustion engines. The goal of this new technology is to secure benefits in fuel economy, broadened torque band, vibration reduction, and overhaul accessibility. Additionally, use of the variable valve timing capability to vary the effective compression ratio is expected to improve multifuel tolerance and efficiency. Efforts directed at the design of HRVS components proved to be far more extensive than had been anticipated, ultimately requiring that proof-trial design/development work be performed. Although both time and funds were exhausted before optical or ion-probe types of in-cylinder investigation could be undertaken, a great deal of laboratory data was acquired during the course of the design/development work. This laboratory data is the basis for the information presented in this final report.

Assessing the damage importance rank in acoustic diagnostics of technical conditions of the internal combustion engine with multi-valued logical decision trees

Directory of Open Access Journals (Sweden)

Deptuła Adam

2017-01-01

Full Text Available This paper presents possible applications of acoustic diagnostics in inspecting the technical condition of an internal combustion engine with autoignition on the example of the Fiat drive unit with the common rail system. As a result of measuring the sound pressure level for specific faults and comparing the noise generated by the motor running smoothly, the detailed maps of changes in the acoustic spectrum may be generated. These results may be helpful in future diagnostics of internal combustion engines. In the paper, we present the results from the scientific works in the area of research, design and operation of internal combustion engines, conducted at the Department of Automotive Engineering, in cooperation with the Laboratory of Hydraulic Drives & Vibroacoustics of Machines at the Wroclaw University of Technology. The broader study has so far allowed us to develop an authoritative method of identifying the type of engine damage using gametree structures. The present works assess the possibility of using multi-valued logic trees.

A biological evaluation of DNA damage detected by comet assay in healthy populations residing in areas that differ in lung cancer incidence.

Science.gov (United States)

Heepchantree, Worapa; Paratasilpin, Thipmani; Kangwanpong, Daoroong

2006-06-01

The comet assay was performed to evaluate the effect of environmental exposure between human populations residing in two areas that differ in lung cancer incidence, Saraphi (n = 91) and Chom Thong (n = 94). Three parameters, the tail length, tail intensity, and tail moment, were used to detect DNA damage in peripheral blood and stimulated lymphocytes with and without the DNA repair inhibitor, aphidicolin. Internal standards, cryopreserved isolated lymphocytes, and isolated lymphocytes irradiated with 2 Gy gamma rays, were used to correct the interexperimental variability. Results revealed a significant difference between two populations only when the tail length was used to measure DNA damage. The evaluation of various potential confounding factors, such as gender, pesticide exposure, smoking, alcohol drinking, and fermented tea leaf or betel nut chewing, indicated no significant influence in DNA damage. In conclusion, significant difference in DNA damage, detected only by tail length between the two populations residing in the areas with different incidence of lung cancer, may reflect a nonhazardous level of exposure to toxic substances.

The test of variables of attention (TOVA): Internal consistency (Q1 vs. Q2 and Q3 vs. Q4) in children with Attention Deficit/Hyperactivity Disorder (ADHD)

Science.gov (United States)

The internal consistency of the Test of Variables of Attention (TOVA) was examined in a cohort of 6- to 12-year-old children (N = 63) strictly diagnosed with ADHD. The internal consistency of errors of omission (OMM), errors of commission (COM), response time (RT), and response time variability (RTV...

Reliability tests for reactor internals replacement technology

International Nuclear Information System (INIS)

Fujimaki, K.; Uchiyama, J.; Ohtsubo, T.

2000-01-01

Structural damage due to aging degradation of LWR reactor internals has been reported in several nuclear plants. NUPEC has started a project to test the reliability of the technology for replacing reactor internals, which was directed at preventive maintenance before damage and repair after damage for the aging degradation. The project has been funded by the Ministry of International Trade and Industry (MITI) of Japan since 1995, and it follows the policy of a report that the MITI has formally issued in April 1996 summarizing the countermeasures to be considered for aging nuclear plants and equipment. This paper gives an outline of the whole test plans and the test results for the BWR reactor internals replacement methods; core shroud, ICM housing, and CRD Housing and stub tube. The test results have shown that the methods were reliable and the structural integrity was appropriate based on the evaluation. (author)

Liability according to civil law regarding border-crossing nuclear damage

International Nuclear Information System (INIS)

Baer, Caroline

1987-12-01

The problem of the liability in border-crossing damage caused by a nuclear-reactor accident is divided into two different areas: the liability according to international law of the state, and liability according to civil right of the licensee of a nuclear power plant. In this study attention is paid to the question of the liability according to civil right: is it possible that an aggrieved obtains compensation for damage? This is investigated on the basis of three standard questions of international private law: which judge is qualified, which law is to be applied, and is acknowledgement and execution of foreign sentences possible? First a historical survey is given of international agreements and national legislations regarding third-party liability. (author). 112 refs

An Analysis of Basic Construction Variables of Racing Wheelchairs Used in the 1984 International Games for the Disabled.

Science.gov (United States)

York, Sherril L.; Kimura, Iris F.

1987-01-01

A photographic analysis of racing wheelchairs used by cerebral palsy class four athletes and amputee athletes at the 1984 International Games for the Disabled was undertaken in order to analyze seven wheelchair construction variables in relation to performance outcome, distance raced, and type of disability of the user. (Author/MT)

Damage on sliding bearings of internal combustion engines. Damage patterns, causes, prevention; Schaeden an Gleitlagern von Verbrennungsmotoren. Erscheinungsbilder, Ursachen, Vermeidung

Energy Technology Data Exchange (ETDEWEB)

Ederer, U.G. [Miba Gleitlager GmbH, Laakrichen (Austria)

2005-07-01

Bearing failures are consequences of system deficiencies which cause an inadequate function of the hydrodynamic action and, thereby, too high a friction, at least locally. The bearing overheats, what ultimately leads to its destruction and that of adjacent components. These 'consequential damages' are frequently severe. We identify, therefore, early stages of malfunction, already as 'bearing damage'. In this condition, a diagnosis and remedial measures to avoid total destruction are possible. Typical bearing conditions, possible causes and remedies are described herein. (orig.)

Winter variability in the western Gulf of Maine: Part 1: Internal tides

Science.gov (United States)

Brown, W. S.

2011-09-01

During the winter 1997-1998, a field program was conducted in Wilkinson Basin-western Gulf of Maine-as part of a study of winter convective mixing. The field program consisted of (1) Wilkinson basin-scale hydrographic surveys, (2) a tight three-mooring array with ˜100 m separations measured temperature and conductivity at rates of 2-15 min and (3) a single pair of upward/downward-looking pair acoustic Doppler current profiling (ADCP) instruments measured currents with 8 m vertical resolution over the 270 m water column in north-central Wilkinson basin at a rate of 10 min. The moored array measurements below the mixed layer (˜100 m depth) between 11 January and 6 February 1998 were dominated by a combination of the relatively strong semidiurnal external (depth-independent or barotropic) tide; upon which were superposed a weaker phase-locked semidiurnal internal tide and a very weak water column mean currents of about 1 cm/s southward or approximately across the local isobaths. The harmonic analysis of a vertical average of the relatively uniform ADCP velocities in the well-mixed upper 123 m of the water column, defined the external tidal currents which were dominated by a nearly rectilinear, across-isobath (326°T) M 2 semidiurnal tidal current of about 15 cm/s. The depth-dependent residual current field, which was created by subtracting the external tidal current, consisted of (1) clockwise-rotating semidiurnal internal tidal currents of about 5 cm/s below the mixed layer; (2) clockwise-rotating inertial currents; and (3) a considerably less energetic subtidal current variability. The results from both frequency-domain empirical orthogonal function and tidal harmonic analyses of the of isotherm displacement series at each of the three moorings in the 100 m array mutually confirm an approximate east-northeastward phase propagation of the dominant M 2 semidiurnal internal tide across Wilkinson Basin. Further investigation supports the idea that this winter internal

Seasonal variability of Internal tide energetics in the western Bay of Bengal

Science.gov (United States)

Mohanty, S.; Rao, A. D.

2017-12-01

The Internal Waves (IWs) are generated by the flow of barotropic tide over the rapidly varying and steep topographic features like continental shelf slope, seamounts, etc. These waves are an important phenomena in the ocean due to their influence on the density structure and energy transfer into the region. Such waves are also important in submarine acoustics, underwater navigation, offshore structures, ocean mixing and biogeochemical processes, etc. over the shelf-slope region. The seasonal variability of internal tides in the western Bay of Bengal is examined by using three-dimensional MITgcm model. The numerical simulations are performed for different periods covering August-September, 2013; November-December, 2013 and March-April, 2014 representing monsoon, post-monsoon and pre-monsoon seasons respectively during which high temporal resolution observed data sets are available. The model is initially validated through the spectral estimate of density and the baroclinic velocities. From the estimate, it is found that its peak is associated with the semi-diurnal frequency at all the depths in both observations and model simulations for November-December and March-April. However in August, the estimate is found to be maximum near the inertial frequency at all available depths. EOF analysis suggests that about 70-80% of the total variance comes from Mode-1 semi-diurnal internal tide in both observations as well as in the model simulations. The phase speed, group speed and wavelength are found to be maximum for post-monsoon season compared to other two seasons. To understand the generation and propagation of internal tides over this region, barotropic-to-baroclinic M2 tidal energy conversion and energy flux are examined. The barotropic-to-baroclinic conversion occurs intensively along the shelf-slope regions and propagate towards the coast. The model simulated energy dissipation rate infers that its maximum occurs at the generation sites and hence the local mixing

Thermodynamic consistency of viscoplastic material models involving external variable rates in the evolution equations for the internal variables

International Nuclear Information System (INIS)

Malmberg, T.

1993-09-01

The objective of this study is to derive and investigate thermodynamic restrictions for a particular class of internal variable models. Their evolution equations consist of two contributions: the usual irreversible part, depending only on the present state, and a reversible but path dependent part, linear in the rates of the external variables (evolution equations of ''mixed type''). In the first instance the thermodynamic analysis is based on the classical Clausius-Duhem entropy inequality and the Coleman-Noll argument. The analysis is restricted to infinitesimal strains and rotations. The results are specialized and transferred to a general class of elastic-viscoplastic material models. Subsequently, they are applied to several viscoplastic models of ''mixed type'', proposed or discussed in the literature (Robinson et al., Krempl et al., Freed et al.), and it is shown that some of these models are thermodynamically inconsistent. The study is closed with the evaluation of the extended Clausius-Duhem entropy inequality (concept of Mueller) where the entropy flux is governed by an assumed constitutive equation in its own right; also the constraining balance equations are explicitly accounted for by the method of Lagrange multipliers (Liu's approach). This analysis is done for a viscoplastic material model with evolution equations of the ''mixed type''. It is shown that this approach is much more involved than the evaluation of the classical Clausius-Duhem entropy inequality with the Coleman-Noll argument. (orig.) [de

Ex-situ X-ray tomography characterization of porosity during high-temperature creep in a Ni-based single-crystal superalloy: Toward understanding what is damage

Energy Technology Data Exchange (ETDEWEB)

Graverend, Jean-Briac le, E-mail: jblgpublications@gmail.com [Texas A& M University, Department of Aerospace Engineering and Materials Science Engineering, TAMU 3141, College Station, TX 77843 (United States); Adrien, Jérome [Université de Lyon, INSA-Lyon, MATEIS CNRS UMR5510, F-69621 Villeurbanne (France); Cormier, Jonathan [Institut Pprime, CNRS-ENSMA-Université de Poitiers, UPR CNRS 3346, Département Physique et Mécanique des Matériaux, ISAE-ENSMA, 1 avenue Clément Ader, BP 40109, F86961 Futuroscope Chasseneuil cedex (France)

2017-05-17

Creep damage by void nucleation and growth limits the lifetime of components subjected to mechanical loads at high temperatures. For the first time, the porosity of a Ni-based single crystal superalloy subjected to high temperature creep tests (T≥1000 °C) is followed by ex-situ X-ray computed tomography. A large experimental campaign consisting of nine temperature/stress conditions is carried out to determine the kinetics of the damage accumulation by voids. It is, indeed, essential to characterize their evolution to create internal variables describing properly the evolution of damage in a Continuum Damage Mechanics framework. Nonetheless, it is pointed out that the increase in the plastic strain rate during the tertiary creep stage is not necessarily related to the increase in the pore volume fraction for the alloy and temperature range explored (1000–1100 °C). Therefore, it seems that the changes in the microstructure, i.e. precipitation coarsening and γ/γ′ topological inversion, and the shearing of the γ′ particles have to be considered further to properly describe the damage evolution. Thus, the Continuum Damage Mechanics theory is undermined and should be replaced by a transformative paradigm taken into consideration microstructural evolutions in order to improve the predictability of further damage models.

A theory of viscoplasticity accounting for internal damage

Science.gov (United States)

Freed, A. D.; Robinson, D. N.

1988-01-01

A constitutive theory for use in structural and durability analyses of high temperature isotropic alloys is presented. Constitutive equations based upon a potential function are determined from conditions of stability and physical considerations. The theory is self-consistent; terms are not added in an ad hoc manner. It extends a proven viscoplastic model by introducing the Kachanov-Rabotnov concept of net stress. Material degradation and inelastic deformation are unified; they evolve simultaneously and interactively. Both isotropic hardening and material degradation evolve with dissipated work which is the sum of inelastic work and internal work. Internal work is a continuum measure of the stored free energy resulting from inelastic deformation.

Micromechanisms of damage in unidirectional fiber reinforced composites

DEFF Research Database (Denmark)

Mishnaevsky, Leon; Brøndsted, Povl

2009-01-01

strength of a composite at the pre-critical load, while the fibers with randomly distributed strengths lead to the higher strength of the composite at post-critical loads. In the case of randomly distributed fiber strengths, the damage growth in fibers seems to be almost independent from the crack length...... in the numerical experiments. The effect of the statistical variability of fiber strengths, viscosity of the polymer matrix as well as the interaction between the damage processes in matrix, fibers and interface are investigated numerically. It is demonstrated that fibers with constant strength ensure higher......Numerical micromechanical investigations of the mechanical behavior and damage evolution of glass fiber reinforced composites are presented. A program code for the automatic generation of 3D micromechanical unit cell models of composites with damageable elements is developed, and used...

Ambulatory arterial stiffness indices and target organ damage in hypertension

Directory of Open Access Journals (Sweden)

Gómez-Marcos Manuel

2012-01-01

Full Text Available Abstract Background The present study was designed to evaluate which arterial stiffness parameter - AASI or the home arterial stiffness index (HASI - correlates best with vascular, cardiac and renal damage in hypertensive individuals. Methods A cross-sectional study was carried out involving 258 hypertensive patients. AASI and HASI were defined as the 1-regression slope of diastolic over systolic blood pressure readings obtained from 24-hour recordings and home blood pressure over 6 days. Renal damage was evaluated by glomerular filtration rate (GFR and microalbuminuria; vascular damage by carotid intima-media thickness (IMT, pulse wave velocity (PWV and ankle/brachial index (ABI; and left ventricular hypertrophy by the Cornell voltage-duration product (VDP and the Novacode index. Results AASI and HASI were not correlated with microalbuminuria, however AASI and HASI- blood pressure variability ratio (BPVR showed negative correlation with GRF. The Cornell PDV was positively correlated with AASI- BPVR-Sleep (r = 0.15, p Conclusions After adjusting for age, gender and 24-hour heart, the variables that best associated with the variability of IMT, PWV and ABI were AASI and Awake-AASI, and with GFR was HASI-BPVR.

Numerical Predictions of Damage and Failure in Carbon Fiber Reinforced Laminates Using a Thermodynamically-Based Work Potential Theory

Science.gov (United States)

Pineda, Evan Jorge; Waas, Anthony M.

2013-01-01

A thermodynamically-based work potential theory for modeling progressive damage and failure in fiber-reinforced laminates is presented. The current, multiple-internal state variable (ISV) formulation, referred to as enhanced Schapery theory (EST), utilizes separate ISVs for modeling the effects of damage and failure. Consistent characteristic lengths are introduced into the formulation to govern the evolution of the failure ISVs. Using the stationarity of the total work potential with respect to each ISV, a set of thermodynamically consistent evolution equations for the ISVs are derived. The theory is implemented into a commercial finite element code. The model is verified against experimental results from two laminated, T800/3900-2 panels containing a central notch and different fiber-orientation stacking sequences. Global load versus displacement, global load versus local strain gage data, and macroscopic failure paths obtained from the models are compared against the experimental results.

Development of damage functions for high-rise building components

International Nuclear Information System (INIS)

Kustu, O.; Miller, D.D.; Brokken, S.T.

1982-10-01

The component approach for predicting the effects that ground motion from underground nuclear explosions will have on structures involves predicting the damage to each structural and nonstructural component of a building on the basis of the expected local deformation that most affects the damage to the component. This study was conducted to provide the basic data necessary to evaluate the component approach. Available published laboratory test data for various high-rise building components were collected. These data were analyzed statistically to determine damage threshold values and their variabilities, which in turn were used to derive component damage functions. The portion of construction costs attributable to various building components was determined statistically. This information was needed because component damage functions define damage as a percentage of the replacement values of the component, and, in order to calculate the overall building damage factor, the relative cost of each component must be estimated. The feasibility of the component approach to damage prediction is demonstrated. It is recommended that further experimental research directed towards developing an adequate data base of component damage thresholds for all significant building components should be encouraged. Parallel to this effort, detailed damage data from specific buildings damaged in earthquakes should be collected to verify the theoretical procedure

A rigorous treatment of uncertainty quantification for Silicon damage metrics

International Nuclear Information System (INIS)

Griffin, P.

2016-01-01

These report summaries the contributions made by Sandia National Laboratories in support of the International Atomic Energy Agency (IAEA) Nuclear Data Section (NDS) Technical Meeting (TM) on Nuclear Reaction Data and Uncertainties for Radiation Damage. This work focused on a rigorous treatment of the uncertainties affecting the characterization of the displacement damage seen in silicon semiconductors. (author)

Estimation of Damage Costs Associated with Flood Events

Science.gov (United States)

Andrews, T. A.; Wauthier, C.; Zipp, K.

2017-12-01

This study investigates the possibility of creating a mathematical function that enables the estimation of flood-damage costs. We begin by examining the costs associated with past flood events in the United States. The data on these tropical storms and hurricanes are provided by the National Oceanic and Atmospheric Administration. With the location, extent of flooding, and damage reparation costs identified, we analyze variables such as: number of inches rained, land elevation, type of landscape, region development in regards to building density and infrastructure, and population concentration. We seek to identify the leading drivers of high flood-damage costs and understand which variables play a large role in the costliness of these weather events. Upon completion of our mathematical analysis, we turn out attention to the 2017 natural disaster of Texas. We divide the region, as we did above, by land elevation, type of landscape, region development in regards to building density and infrastructure, and population concentration. Then, we overlay the number of inches rained in those regions onto the divided landscape and apply our function. We hope to use these findings to estimate the potential flood-damage costs of Hurricane Harvey. This information is then transformed into a hazard map that could provide citizens and businesses of flood-stricken zones additional resources for their insurance selection process.

Application of Deep Learning Architectures for Accurate and Rapid Detection of Internal Mechanical Damage of Blueberry Using Hyperspectral Transmittance Data

Directory of Open Access Journals (Sweden)

Zhaodi Wang

2018-04-01

Full Text Available Deep learning has become a widely used powerful tool in many research fields, although not much so yet in agriculture technologies. In this work, two deep convolutional neural networks (CNN, viz. Residual Network (ResNet and its improved version named ResNeXt, are used to detect internal mechanical damage of blueberries using hyperspectral transmittance data. The original structure and size of hypercubes are adapted for the deep CNN training. To ensure that the models are applicable to hypercube, we adjust the number of filters in the convolutional layers. Moreover, a total of 5 traditional machine learning algorithms, viz. Sequential Minimal Optimization (SMO, Linear Regression (LR, Random Forest (RF, Bagging and Multilayer Perceptron (MLP, are performed as the comparison experiments. In terms of model assessment, k-fold cross validation is used to indicate that the model performance does not vary with the different combination of dataset. In real-world application, selling damaged berries will lead to greater interest loss than discarding the sound ones. Thus, precision, recall, and F1-score are also used as the evaluation indicators alongside accuracy to quantify the false positive rate. The first three indicators are seldom used by investigators in the agricultural engineering domain. Furthermore, ROC curves and Precision-Recall curves are plotted to visualize the performance of classifiers. The fine-tuned ResNet/ResNeXt achieve average accuracy and F1-score of 0.8844/0.8784 and 0.8952/0.8905, respectively. Classifiers SMO/ LR/RF/Bagging/MLP obtain average accuracy and F1-score of 0.8082/0.7606/0.7314/0.7113/0.7827 and 0.8268/0.7796/0.7529/0.7339/0.7971, respectively. Two deep learning models achieve better classification performance than the traditional machine learning methods. Classification for each testing sample only takes 5.2 ms and 6.5 ms respectively for ResNet and ResNeXt, indicating that the deep learning framework has great

Application of Deep Learning Architectures for Accurate and Rapid Detection of Internal Mechanical Damage of Blueberry Using Hyperspectral Transmittance Data

Science.gov (United States)

Hu, Menghan; Zhai, Guangtao

2018-01-01

Deep learning has become a widely used powerful tool in many research fields, although not much so yet in agriculture technologies. In this work, two deep convolutional neural networks (CNN), viz. Residual Network (ResNet) and its improved version named ResNeXt, are used to detect internal mechanical damage of blueberries using hyperspectral transmittance data. The original structure and size of hypercubes are adapted for the deep CNN training. To ensure that the models are applicable to hypercube, we adjust the number of filters in the convolutional layers. Moreover, a total of 5 traditional machine learning algorithms, viz. Sequential Minimal Optimization (SMO), Linear Regression (LR), Random Forest (RF), Bagging and Multilayer Perceptron (MLP), are performed as the comparison experiments. In terms of model assessment, k-fold cross validation is used to indicate that the model performance does not vary with the different combination of dataset. In real-world application, selling damaged berries will lead to greater interest loss than discarding the sound ones. Thus, precision, recall, and F1-score are also used as the evaluation indicators alongside accuracy to quantify the false positive rate. The first three indicators are seldom used by investigators in the agricultural engineering domain. Furthermore, ROC curves and Precision-Recall curves are plotted to visualize the performance of classifiers. The fine-tuned ResNet/ResNeXt achieve average accuracy and F1-score of 0.8844/0.8784 and 0.8952/0.8905, respectively. Classifiers SMO/ LR/RF/Bagging/MLP obtain average accuracy and F1-score of 0.8082/0.7606/0.7314/0.7113/0.7827 and 0.8268/0.7796/0.7529/0.7339/0.7971, respectively. Two deep learning models achieve better classification performance than the traditional machine learning methods. Classification for each testing sample only takes 5.2 ms and 6.5 ms respectively for ResNet and ResNeXt, indicating that the deep learning framework has great potential for

Application of Deep Learning Architectures for Accurate and Rapid Detection of Internal Mechanical Damage of Blueberry Using Hyperspectral Transmittance Data.

Science.gov (United States)

Wang, Zhaodi; Hu, Menghan; Zhai, Guangtao

2018-04-07

Deep learning has become a widely used powerful tool in many research fields, although not much so yet in agriculture technologies. In this work, two deep convolutional neural networks (CNN), viz. Residual Network (ResNet) and its improved version named ResNeXt, are used to detect internal mechanical damage of blueberries using hyperspectral transmittance data. The original structure and size of hypercubes are adapted for the deep CNN training. To ensure that the models are applicable to hypercube, we adjust the number of filters in the convolutional layers. Moreover, a total of 5 traditional machine learning algorithms, viz. Sequential Minimal Optimization (SMO), Linear Regression (LR), Random Forest (RF), Bagging and Multilayer Perceptron (MLP), are performed as the comparison experiments. In terms of model assessment, k-fold cross validation is used to indicate that the model performance does not vary with the different combination of dataset. In real-world application, selling damaged berries will lead to greater interest loss than discarding the sound ones. Thus, precision, recall, and F1-score are also used as the evaluation indicators alongside accuracy to quantify the false positive rate. The first three indicators are seldom used by investigators in the agricultural engineering domain. Furthermore, ROC curves and Precision-Recall curves are plotted to visualize the performance of classifiers. The fine-tuned ResNet/ResNeXt achieve average accuracy and F1-score of 0.8844/0.8784 and 0.8952/0.8905, respectively. Classifiers SMO/ LR/RF/Bagging/MLP obtain average accuracy and F1-score of 0.8082/0.7606/0.7314/0.7113/0.7827 and 0.8268/0.7796/0.7529/0.7339/0.7971, respectively. Two deep learning models achieve better classification performance than the traditional machine learning methods. Classification for each testing sample only takes 5.2 ms and 6.5 ms respectively for ResNet and ResNeXt, indicating that the deep learning framework has great potential for

Detecting damage in steel with scanning SQUID microscopy

International Nuclear Information System (INIS)

Lee, Tae-Kyu; Clatterbuck, D.M.; Morris, J.W. Jr.; Shaw, T.J.; Lee, Seungkyun; Clarke, John

2002-01-01

A 'Holy Grail' of NDE research is a non-destructive method for measuring fatigue damage prior to crack initiation. High-Tc scanning SQUID microscopy may be a useful tool. Because of the exceptional magnetic sensitivity of this technique, fatigue damage can be detected well before microcrack initiation, and in the absence of other obvious microstructure or property changes. Given the spatial resolution of the technique, undamaged material can be located and used to set internal standards

Detecting damage in steel with scanning SQUID microscopy

International Nuclear Information System (INIS)

Lee, Tae-Kyu; Clatterbuck, David; Morris Jr., J.W.; Shaw, T.J.; McDermott R.; Clarke, John

2001-01-01

A ''Holy Grail'' of NDE research is a non-destructive method for measuring fatigue damage prior to crack initiation. High-Tc scanning SQUID microscopy may be a useful tool. Because of the exceptional magnetic sensitivity of this technique, fatigue damage can be detected well before microcrack initiation, and in the absence of other obvious microstructure or property changes. Given the spatial resolution of the technique, undamaged material can be located and used to set internal standards

Oxidative stress and inflammation generated DNA damage by exposure to air pollution particles

DEFF Research Database (Denmark)

Møller, Peter; Danielsen, Pernille Høgh; Karottki, Dorina Gabriela

2014-01-01

at different locations (spatial variability), times (temporal variability) or particle size fraction across different experimental systems of acellular conditions, cultured cells, animals and humans. Nevertheless, there is substantial variation in the genotoxic, inflammation and oxidative stress potential......Generation of oxidatively damaged DNA by particulate matter (PM) is hypothesized to occur via production of reactive oxygen species (ROS) and inflammation. We investigated this hypothesis by comparing ROS production, inflammation and oxidatively damaged DNA in different experimental systems...... investigating air pollution particles. There is substantial evidence indicating that exposure to air pollution particles was associated with elevated levels of oxidatively damaged nucleobases in circulating blood cells and urine from humans, which is supported by observations of elevated levels of genotoxicity...

Metabolite damage and repair in metabolic engineering design.

Science.gov (United States)

Sun, Jiayi; Jeffryes, James G; Henry, Christopher S; Bruner, Steven D; Hanson, Andrew D

2017-11-01

The necessarily sharp focus of metabolic engineering and metabolic synthetic biology on pathways and their fluxes has tended to divert attention from the damaging enzymatic and chemical side-reactions that pathway metabolites can undergo. Although historically overlooked and underappreciated, such metabolite damage reactions are now known to occur throughout metabolism and to generate (formerly enigmatic) peaks detected in metabolomics datasets. It is also now known that metabolite damage is often countered by dedicated repair enzymes that undo or prevent it. Metabolite damage and repair are highly relevant to engineered pathway design: metabolite damage reactions can reduce flux rates and product yields, and repair enzymes can provide robust, host-independent solutions. Herein, after introducing the core principles of metabolite damage and repair, we use case histories to document how damage and repair processes affect efficient operation of engineered pathways - particularly those that are heterologous, non-natural, or cell-free. We then review how metabolite damage reactions can be predicted, how repair reactions can be prospected, and how metabolite damage and repair can be built into genome-scale metabolic models. Lastly, we propose a versatile 'plug and play' set of well-characterized metabolite repair enzymes to solve metabolite damage problems known or likely to occur in metabolic engineering and synthetic biology projects. Copyright © 2017 International Metabolic Engineering Society. All rights reserved.

MUSCLE STRENGTH AND DAMAGE FOLLOWING TWO MODES OF VARIABLE RESISTANCE TRAINING

Directory of Open Access Journals (Sweden)

Saied Jalal Aboodarda

2011-12-01

Full Text Available Nautilus Machine (NM and Elastic Resistance (ER have gained considerable popularity among athletes and recreational lifters seeking to increase muscle strength. However, there is controversy concerning the use of ER for increasing muscle hypertrophy and strength among healthy-trained individuals. The aim of the study was to compare the effect of repeated near maximal contractions by ER/NM on indicators of muscle damage including: maximal strength decrement (MVIC, rate of muscle soreness (DOMS, concentration of plasma creatine kinase (CK and increased high muscle signal on T2 weighted images using magnetic resonance imaging (MRI. Nine healthy male subjects completed two modalities of exercise (5 sets × 10RM ER/NM in a counterbalance cross-over study design with three weeks "wash-out" period between experiments. The MVIC was measured and DOMS rated and recorded for 4 consecutive days while blood samples were collected on day 1, 3, 5 and 7. Prior to and forty eight hours after completion of each mode of exercise, subjects underwent MRI scanning. The average of applied forces demonstrated significantly higher value for NM compared with ER (362 ± 34.2 N vs 266.73 ± 44.6 N respectively throughout the 5 sets of dynamic exercise (all p < 0.05. However, the indicators of muscle damage (T2 relaxation time, DOMS, MVIC and serum CK exhibited a very similar response across both modes of training. Plasma CK increased significantly following both modes of training with the peak value on Day 3 (p < 0.05. The time course of muscle soreness reached a significant level after both modes of exercise and showed a peak value on the 2nd day (p < 0.05. The T2 relaxation time demonstrated a statistically significant increase following ER and NM compared with the pre-test value (p < 0.05. The similarity of these responses following both the ER and NM exercise training session suggests that both modes of training provide a similar training stress; despite a considerably

Interpreting and Utilising Intersubject Variability in Brain Function.

Science.gov (United States)

Seghier, Mohamed L; Price, Cathy J

2018-03-30

We consider between-subject variance in brain function as data rather than noise. We describe variability as a natural output of a noisy plastic system (the brain) where each subject embodies a particular parameterisation of that system. In this context, variability becomes an opportunity to: (i) better characterise typical versus atypical brain functions; (ii) reveal the different cognitive strategies and processing networks that can sustain similar tasks; and (iii) predict recovery capacity after brain damage by taking into account both damaged and spared processing pathways. This has many ramifications for understanding individual learning preferences and explaining the wide differences in human abilities and disabilities. Understanding variability boosts the translational potential of neuroimaging findings, in particular in clinical and educational neuroscience. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Calculation of DPA in the Reactor Internal Structural Materials of Nuclear Power Plant

International Nuclear Information System (INIS)

Kim, Yong Deong; Lee, Hwan Soo

2014-01-01

The embrittlement is mainly caused by atomic displacement damage due to irradiations with neutrons, especially fast neutrons. The integrity of the reactor internal structural materials has to be ensured over the reactor life time, threatened by the irradiation induced displacement damage. Accurate modeling and prediction of the displacement damage is a first step to evaluate the integrity of the reactor internal structural materials. Traditional approaches for analyzing the displacement damage of the materials have relied on tradition model, developed initially for simple metals, Kinchin and Pease (K-P), and the standard formulation of it by Norgett et al. , often referred to as the 'NRT' model. An alternative and complementary strategy for calculating the displacement damage is to use MCNP code. MCNP uses detailed physics and continuous-energy cross-section data in its simulations. In this paper, we have performed the evaluation of the displacement damage of the reactor internal structural materials in Kori NPP unit 1 using detailed Monte Carlo modeling and compared with predictions results of displacement damage using the classical NRT model. The evaluation of the displacement damage of the reactor internal structural materials in Kori NPP unit 1 using detailed Monte Carlo modeling has been performed. The maximum value of the DPA rate was occurred at the baffle side of the reactor internal where the node has the maximum neutron flux

Damage development in 9%Cr steels

International Nuclear Information System (INIS)

Rauch, M.; Maile, K.

2003-01-01

Modern 9-11% martensitic steels are candidate materials to be used in modern fossil fired power plants with high efficiency rates. The focus of the R and D work is put on the further development and optimisation, the determination of material characteristics but also on the identification and quantification of damage mechanisms and the damage evolution. For this purpose extensive experiments such as long creep tests on specimens under internal pressure, metallurgical examinations and theoretical investigations for determination of stress-strain state which have been conducted. The laboratory tests are completed by examination of real components. As a result an empirical description of the creep cavity density as a function of deformation and multiaxiality of stress state has been carried out which can be used in further FE-calculations determining the damage state. The results of all metallographical examinations on specimens with different heat treatments and service loads are summarised in a structure atlas and are published for further usage. Damage development, martensitic 9 % Cr steels, creep cavity density, creep tests under multiaxial load, metallographical investigations, and measurements on pipe bends. (author)

Signal-based nonlinear modelling for damage assessment under variable temperature conditions by means of acousto-ultrasonics

DEFF Research Database (Denmark)

Torres-Arredondo, M. -A.; Sierra-Perez, Julian; Tibaduiza, D. -A.

2015-01-01

Damage assessment can be considered as the main task within the context of structural health monitoring (SHM) systems. This task is not only confined to the detection of damages in its basic algorithms but also in the generation of early warnings to prevent possible catastrophes in the daily use...

Damage analysis of CF/AF hybrid fabric reinforced plastic laminated composites with scanned image microscopy

Science.gov (United States)

Miyasaka, Chiaki; Kasano, Hideaki; Shull, Peter J.

2004-07-01

The article presents an experimental study that has been conducted to evaluate the impact loading damage within hybrid fabric laminates-carbon and Aramid fibers. The experiments have been undertaken on a series of interply hybrid specimens with different preprags stacking sequences. Impact damage was created using an air-gun like impact device propelling spherical steel balls with diameters of 5.0mm and 10.0mm and having velocities of 113m/s and 40m/s respectively. The resulting specimen surface and internal damage (e.g., micro-cracking and debonding) was visualized nondestructively by a scanning acoustic microscope (SAM) while further interrogation of specific internal damage was visualized using a scanning electron microscope (SEM) on cross-sectioned panels.

Raman study of radiation-damaged zircon under hydrostatic compression

Science.gov (United States)

Nasdala, Lutz; Miletich, Ronald; Ruschel, Katja; Váczi, Tamás

2008-12-01

Pressure-induced changes of Raman band parameters of four natural, gem-quality zircon samples with different degrees of self-irradiation damage, and synthetic ZrSiO4 without radiation damage, have been studied under hydrostatic compression in a diamond anvil cell up to ~10 GPa. Radiation-damaged zircon shows similar up-shifts of internal SiO4 stretching modes at elevated pressures as non-damaged ZrSiO4. Only minor changes of band-widths were observed in all cases. This makes it possible to estimate the degree of radiation damage from the width of the ν3(SiO4) band of zircon inclusions in situ, almost independent from potential “fossilized pressures” or compressive strain acting on the inclusions. An application is the non-destructive analysis of gemstones such as corundum or spinel: broadened Raman bands are a reliable indicator of self-irradiation damage in zircon inclusions, whose presence allows one to exclude artificial color enhancement by high-temperature treatment of the specimen.

Statistical modelling of compression and fatigue damage of unidirectional fiber reinforced composites

DEFF Research Database (Denmark)

Mishnaevsky, Leon; Brøndsted, Povl

2009-01-01

A statistical computational model of strength and damage of unidirectional carbon fiber reinforced composites under compressive and cyclic compressive loading is presented in this paper. The model is developed on the basis of the Budiansky–Fleck fiber kinking condition, continuum damage mechanics...... concept and the Monte-Carlo method. The effects of fiber misalignment variability, fiber clustering, load sharing rules on the damage in composite are studied numerically. It is demonstrated that the clustering of fibers has a negative effect of the damage resistance of a composite. Further, the static...

Radiation damage prediction system using damage function

International Nuclear Information System (INIS)

Tanaka, Yoshihisa; Mori, Seiji

1979-01-01

The irradiation damage analysis system using a damage function was investigated. This irradiation damage analysis system consists of the following three processes, the unfolding of a damage function, the calculation of the neutron flux spectrum of the object of damage analysis and the estimation of irradiation effect of the object of damage analysis. The damage function is calculated by applying the SAND-2 code. The ANISN and DOT3, 5 codes are used to calculate neutron flux. The neutron radiation and the allowable time of reactor operation can be estimated based on these calculations of the damage function and neutron flux. The flow diagram of the process of analyzing irradiation damage by a damage function and the flow diagram of SAND-2 code are presented, and the analytical code for estimating damage, which is determined with a damage function and a neutron spectrum, is explained. The application of the irradiation damage analysis system using a damage function was carried out to the core support structure of a fast breeder reactor for the damage estimation and the uncertainty evaluation. The fundamental analytical conditions and the analytical model for this work are presented, then the irradiation data for SUS304, the initial estimated values of a damage function, the error analysis for a damage function and the analytical results are explained concerning the computation of a damage function for 10% total elongation. Concerning the damage estimation of FBR core support structure, the standard and lower limiting values of damage, the permissible neutron flux and the allowable years of reactor operation are presented and were evaluated. (Nakai, Y.)

Frost damage of concrete subject to confinement

DEFF Research Database (Denmark)

Hasholt, Marianne Tange

2016-01-01

When internal frost damage is observed in real concrete structures, the usual pattern is cracks with a preferred orientation parallel to the exposed surface. When exposing concrete with poor frost resistance to a standardised freeze/thaw test in the laboratory, the orientations of the resulting...

A damage mechanics based approach to structural deterioration and reliability

Energy Technology Data Exchange (ETDEWEB)

Bhattcharya, B.; Ellingwood, B. [Johns Hopkins Univ., Baltimore, MD (United States). Dept. of Civil Engineering

1998-02-01

Structural deterioration often occurs without perceptible manifestation. Continuum damage mechanics defines structural damage in terms of the material microstructure, and relates the damage variable to the macroscopic strength or stiffness of the structure. This enables one to predict the state of damage prior to the initiation of a macroscopic flaw, and allows one to estimate residual strength/service life of an existing structure. The accumulation of damage is a dissipative process that is governed by the laws of thermodynamics. Partial differential equations for damage growth in terms of the Helmholtz free energy are derived from fundamental thermodynamical conditions. Closed-form solutions to the equations are obtained under uniaxial loading for ductile deformation damage as a function of plastic strain, for creep damage as a function of time, and for fatigue damage as function of number of cycles. The proposed damage growth model is extended into the stochastic domain by considering fluctuations in the free energy, and closed-form solutions of the resulting stochastic differential equation are obtained in each of the three cases mentioned above. A reliability analysis of a ring-stiffened cylindrical steel shell subjected to corrosion, accidental pressure, and temperature is performed.

A damage mechanics based approach to structural deterioration and reliability

International Nuclear Information System (INIS)

Bhattcharya, B.; Ellingwood, B.

1998-02-01

Structural deterioration often occurs without perceptible manifestation. Continuum damage mechanics defines structural damage in terms of the material microstructure, and relates the damage variable to the macroscopic strength or stiffness of the structure. This enables one to predict the state of damage prior to the initiation of a macroscopic flaw, and allows one to estimate residual strength/service life of an existing structure. The accumulation of damage is a dissipative process that is governed by the laws of thermodynamics. Partial differential equations for damage growth in terms of the Helmholtz free energy are derived from fundamental thermodynamical conditions. Closed-form solutions to the equations are obtained under uniaxial loading for ductile deformation damage as a function of plastic strain, for creep damage as a function of time, and for fatigue damage as function of number of cycles. The proposed damage growth model is extended into the stochastic domain by considering fluctuations in the free energy, and closed-form solutions of the resulting stochastic differential equation are obtained in each of the three cases mentioned above. A reliability analysis of a ring-stiffened cylindrical steel shell subjected to corrosion, accidental pressure, and temperature is performed

75 FR 64717 - Convention on Supplementary Compensation for Nuclear Damage Contingent Cost Allocation

Science.gov (United States)

2010-10-20

... DEPARTMENT OF ENERGY Convention on Supplementary Compensation for Nuclear Damage Contingent Cost... Supplementary Compensation for Nuclear Damage (``CSC'') including its obligation to contribute to an international supplementary fund in the event of certain nuclear incidents. The NOI provided a September 27...

Development of international law concerning nuclear liability

International Nuclear Information System (INIS)

Ifflaender, G.; Kantner, G.

1979-01-01

A short overview is given of the most important international conventions relating to civil liability for damage to, or loss of, life of persons or property, caused by nuclear incidents during the operation of stationary and non-stationary nuclear installations or transport of nuclear material. In accord with the international provisions, in the German Democratic Republic too, nuclear operators are exclusively liable for such damage unless it has been caused intentionally by the injury party. (author)

Internal variability in a 1000-yr control simulation with the coupled climate model ECHO-G - I. Near-surface temperature, precipitation and mean sea level pressure.

Energy Technology Data Exchange (ETDEWEB)

Min, Seung-Ki; Hense, Andreas [Univ. of Bonn (Germany). Meteorological Inst.; Legutke, Stephanie [Max Planck Inst. for Meteorology, Hamburg (Germany); Kwon, Won-Tae [Meteorological Research Inst., Seoul (Korea, Republic of)

2005-08-01

The internal variability in a 1000-yr control simulation with the coupled atmosphere/ocean global climate model ECHO-G is analysed using near-surface temperature, precipitation and mean sea level pressure variables, and is compared with observations and other coupled climate model simulations. ECHO-G requires annual mean flux adjustments for heat and freshwater in order to simulate no significant climate drift for 1000 yr, but no flux adjustments for momentum. The ECHO-G control run captures well most aspects of the observed seasonal and annual climatology and of the interannual to decadal variability of the three variables. Model biases are very close to those in ECHAM4 (atmospheric component of ECHO-G) stand-alone integrations with prescribed observed sea surface temperature. A trend comparison between observed and modelled near-surface temperatures shows that the observed near-surface global warming is larger than internal variability produced by ECHO-G, supporting previous studies. The simulated global mean near-surface temperatures, however, show a 2-yr spectral peak which is linked with a strong biennial bias of energy in the El Nino Southern Oscillation signal. Consequently, the interannual variability (39 yr) is underestimated.

A study on ground truth data for impact damaged polymer matrix composites

Science.gov (United States)

Wallentine, Sarah M.; Uchic, Michael D.

2018-04-01

This study presents initial results toward correlative characterization of barely-visible impact damage (BVID) in unidirectional carbon fiber reinforced polymer matrix composite laminate plates using nondestructive ultrasonic testing (UT) and destructive serial sectioning microscopy. To produce damage consistent with BVID, plates were impacted using an instrumented drop-weight tower with pneumatic anti-rebound brake. High-resolution, normal-incidence, single-sided, pulse-echo, immersion UT scans were performed to verify and map internal damage after impact testing. UT C-scans were registered to optical images of the specimen via landmark registration and the use of an affine transformation, allowing location of internal damage in reference to the overall plate and enabling specimen preparation for subsequent serial sectioning. The impact-damaged region was extracted from each plate, prepared and mounted for materialographic sectioning. A modified RoboMet.3D version 2 was employed for serial sectioning and optical microscopy characterization of the impact damaged regions. Automated montage capture of sub-micron resolution, bright-field reflection, 12-bit monochrome optical images was performed over the entire specimen cross-section. These optical images were post- processed to produce 3D data sets, including segmentation to improve visualization of damage features. Impact-induced delaminations were analyzed and characterized using both serial sectioning and ultrasonic methods. Those results and conclusions are presented, as well as future direction of the current study.

Crack and damage assessment in concrete and polymer matrices using liquids released internally from hollow optical fibers

Science.gov (United States)

Dry, Carolyn M.; McMillan, William

1996-05-01

This was an investigation into the feasibility of using liquid core optical fibers for the detection and self repair of cracking in cement or polymer materials generated by dynamic or static loading. These experiments relied on our current research sponsored by the National Science Foundation. That work on the concept of internal adhesive delivery from hollow fibers for repair was here combined with the nondestructive fiber optic analysis of crack location and volume. The combination of the ability to remotely measure crack occurrence in real time and determine the location and volume of crack damage in the matrix is unique in the field of optic sensors. The combination of this with crack repair, rebonding of any detached or broken fibers, and replenishment of liquid core chemicals, when necessary, make this a potentially powerful sensing and repair tool. Work on this research topic was sponsored by the University of Illinois.

Radiation injury caused by internal contamination

International Nuclear Information System (INIS)

Petyrek, P.

1988-01-01

Basic data are given of radiation injury of the respiratory organs, digestive tract, hematogenous tissues and the thyroid due to internal contamination. Attention is drawn to the complexity of the problem and to the effect of the various factors affecting the picture and course of the radiation damage. The treatment is based on the assumption that fundamental is the damage of the stem cells of the critical organs. Discussed are also the basic clinical pictures that can occur due to internal contamination with activities causing radiation injury. (B.S.). 27 refs

Development of the Crohn's disease digestive damage score, the Lémann score

DEFF Research Database (Denmark)

Pariente, Benjamin; Cosnes, Jacques; Danese, Silvio

2011-01-01

is to outline the methods to develop an instrument that can measure cumulative bowel damage. The project is being conducted by the International Program to develop New Indexes in Crohn's disease (IPNIC) group. This instrument, called the Crohn's Disease Digestive Damage Score (the Lémann score), should take...

Structural damage identification using piezoelectric impedance measurement with sparse inverse analysis

Science.gov (United States)

Cao, Pei; Qi, Shuai; Tang, J.

2018-03-01

The impedance/admittance measurements of a piezoelectric transducer bonded to or embedded in a host structure can be used as damage indicator. When a credible model of the healthy structure, such as the finite element model, is available, using the impedance/admittance change information as input, it is possible to identify both the location and severity of damage. The inverse analysis, however, may be under-determined as the number of unknowns in high-frequency analysis is usually large while available input information is limited. The fundamental challenge thus is how to find a small set of solutions that cover the true damage scenario. In this research we cast the damage identification problem into a multi-objective optimization framework to tackle this challenge. With damage locations and severities as unknown variables, one of the objective functions is the difference between impedance-based model prediction in the parametric space and the actual measurements. Considering that damage occurrence generally affects only a small number of elements, we choose the sparsity of the unknown variables as another objective function, deliberately, the l 0 norm. Subsequently, a multi-objective Dividing RECTangles (DIRECT) algorithm is developed to facilitate the inverse analysis where the sparsity is further emphasized by sigmoid transformation. As a deterministic technique, this approach yields results that are repeatable and conclusive. In addition, only one algorithmic parameter, the number of function evaluations, is needed. Numerical and experimental case studies demonstrate that the proposed framework is capable of obtaining high-quality damage identification solutions with limited measurement information.

Probabilistic Assessment of Structural Seismic Damage for Buildings in Mid-America

International Nuclear Information System (INIS)

Bai, Jong-Wha; Hueste, Mary Beth D.; Gardoni, Paolo

2008-01-01

This paper provides an approach to conduct a probabilistic assessment of structural damage due to seismic events with an application to typical building structures in Mid-America. The developed methodology includes modified damage state classifications based on the ATC-13 and ATC-38 damage states and the ATC-38 database of building damage. Damage factors are assigned to each damage state to quantify structural damage as a percentage of structural replacement cost. To account for the inherent uncertainties, these factors are expressed as random variables with a Beta distribution. A set of fragility curves, quantifying the structural vulnerability of a building, is mapped onto the developed methodology to determine the expected structural damage. The total structural damage factor for a given seismic intensity is then calculated using a probabilistic approach. Prediction and confidence bands are also constructed to account for the prevailing uncertainties. The expected seismic structural damage is assessed for a typical building structure in the Mid-America region using the developed methodology. The developed methodology provides a transparent procedure, where the structural damage factors can be updated as additional seismic damage data becomes available

Isochronous variable energy cyclotron of IPEN-CNEN/SP (Brazil)

International Nuclear Information System (INIS)

Lucki, G.; Zanchetta, A.A.; Gouveia, S.; Klein, H.

1984-01-01

The cyclotron CV-28 installed at the Radiation Damage Division of IPEN-CNEN/SP is a multi-particle radiation source where protons, deuterons, 3 He ions and alpha particles can be accelerated with variable energy up to 24, 14, 36 and 28 MeV, respectively. The cyclotron is a versatile machine that can be applied in research and development of : radioisotope production - materials science - nuclear physics - activation analysis and others. First internal beam with 24 MeV protons has been obtained in April 23, 1981. First irradiation of Cu sample, at the external beam (beam current 1.5 μA), with 28 MeV alpha particles was performed in December 29, 1983. Main characteristics of the cyclotron are given together with a description of peripheral systems and experimental capability. Presently the accelerator is being optimized for cpontinuous running. (Author) [pt

Macroeconomic Variables, International Islamic Indices, and The Return Volatility in Jakarta Islamic Index

Directory of Open Access Journals (Sweden)

Yoghi Citra Pratama

2018-01-01

Full Text Available According to understand the behavior of Islamic equity markets the primary objective of this research is to analyze the effect of macroeconomic indicators and International Islamic Index on return volatility of Jakarta Islamic Index. The analysis method used in this study is AutoRegressive Conditional Heteroscedastic-Generalized AutoRegressive Conditional Heteroscedastic (ARCH-GARCH. The result of this research showed that all variables, i.e., BI rate, inflation rate, IDR-USD exchange rate, DJIUS index, DJIUK index, FTSJP index and FTSMY index have a simultaneously significant impact on return volatility of JII. While t-test results show that BI rate, IDR-USD exchange rate, DJIUK index and FTSMY index have a substantial effect on return volatility of JII.DOI: 10.15408/aiq.v10i1.5550

Post flood damage data collection and assessment in Albania based on DesInventar methodology

Science.gov (United States)

Toto, Emanuela; Massabo, Marco; Deda, Miranda; Rossello, Laura

2015-04-01

In 2013 in Albania was implemented a collection of disaster losses based on Desinventar. The DesInventar system consists in a methodology and software tool that lead to the systematic collection, documentation and analysis of loss data on disasters. The main sources of information about disasters used for the Albanian database were the Albanian Ministry of Internal Affairs, the National Library and the State archive. Specifically for floods the database created contains nearly 900 datasets, for a period of 148 years (from 1865 to 2013). The data are georeferenced on the administrative units of Albania: Region, Provinces and Municipalities. The datasets describe the events by reporting the date of occurrence, the duration, the localization in administrative units and the cause. Additional information regards the effects and damage that the event caused on people (deaths, injured, missing, affected, relocated, evacuated, victims) and on houses (houses damaged or destroyed). Other quantitative indicators are the losses in local currency or US dollars, the damage on roads, the crops affected , the lost cattle and the involvement of social elements over the territory such as education and health centers. Qualitative indicators simply register the sectors (e.g. transportations, communications, relief, agriculture, water supply, sewerage, power and energy, industries, education, health sector, other sectors) that were affected. Through the queries and analysis of the data collected it was possible to identify the most affected areas, the economic loss, the damage in agriculture, the houses and people affected and many other variables. The most vulnerable Regions for the past floods in Albania were studied and individuated, as well as the rivers that cause more damage in the country. Other analysis help to estimate the damage and losses during the main flood events of the recent years, occurred in 2010 and 2011, and to recognize the most affected sectors. The database was

The Association between Tax Structure and Cigarette Price Variability: Findings from the International Tobacco Control Policy Evaluation (ITC) Project

Science.gov (United States)

Shang, Ce; Chaloupka, Frank J.; Fong, Geoffrey T; Thompson, Mary; O’Connor, Richard J

2015-01-01

Background Recent studies have shown that more opportunities exist for tax avoidance when cigarette excise tax structure departs from a uniform specific structure. However, the association between tax structure and cigarette price variability has not been thoroughly studied in the existing literature. Objective To examine how cigarette tax structure is associated with price variability. The variability of self-reported prices is measured using the ratios of differences between higher and lower prices to the median price such as the IQR-to-median ratio. Methods We used survey data taken from the International Tobacco Control Policy Evaluation (ITC) Project in 17 countries to conduct the analysis. Cigarette prices were derived using individual purchase information and aggregated to price variability measures for each surveyed country and wave. The effect of tax structures on price variability was estimated using Generalised Estimating Equations after adjusting for year and country attributes. Findings Our study provides empirical evidence of a relationship between tax structure and cigarette price variability. We find that, compared to the specific uniform tax structure, mixed uniform and tiered (specific, ad valorem or mixed) structures are associated with greater price variability (p≤0.01). Moreover, while a greater share of the specific component in total excise taxes is associated with lower price variability (p≤0.05), a tiered tax structure is associated with greater price variability (p≤0.01). The results suggest that a uniform and specific tax structure is the most effective tax structure for reducing tobacco consumption and prevalence by limiting price variability and decreasing opportunities for tax avoidance. PMID:25855641

Cardiac Organ Damage and Arterial Stiffness in Autonomic Failure: Comparison With Essential Hypertension.

Science.gov (United States)

Milazzo, Valeria; Maule, Simona; Di Stefano, Cristina; Tosello, Francesco; Totaro, Silvia; Veglio, Franco; Milan, Alberto

2015-12-01

Autonomic failure (AF) is characterized by orthostatic hypotension, supine hypertension, and increased blood pressure (BP) variability. AF patients develop cardiac organ damage, similarly to essential hypertension (EH), and have higher arterial stiffness than healthy controls. Determinants of cardiovascular organ damage in AF are not well known: both BP variability and mean BP values may be involved. The aim of the study was to evaluate cardiac organ damage, arterial stiffness, and central hemodynamics in AF, compared with EH subjects with similar 24-hour BP and a group of healthy controls, and to evaluate determinants of target organ damage in patients with AF. Twenty-seven patients with primary AF were studied (mean age, 65.7±11.2 years) using transthoracic echocardiography, carotid-femoral pulse wave velocity, central hemodynamics, and 24-hour ambulatory BP monitoring. They were compared with 27 EH subjects matched for age, sex, and 24-hour mean BP and with 27 healthy controls. AF and EH had similar left ventricular mass (101.6±33.3 versus 97.7±28.1 g/m(2), P=0.59) and carotid-femoral pulse wave velocity (9.3±1.8 versus 9.2±3.0 m/s, P=0.93); both parameters were significantly lower in healthy controls (Phypertensive heart disease and increased arterial stiffness, similar to EH with comparable mean BP values. Twenty-four-hour and nighttime systolic BP were determinants of cardiovascular damage, independent of BP variability. © 2015 American Heart Association, Inc.

Probabilistic structural damage identification based on vibration data

International Nuclear Information System (INIS)

Hao, H.; Xia, Y.

2001-01-01

Vibration-based methods are being rapidly developed and applied to detect structural damage in civil, mechanical and aerospace engineering communities in the last two decades. But uncertainties existing in the structural model and measured vibration data might lead to unreliable results. This paper will present some recent research results to tackle the above mentioned uncertainty problems. By assuming each of the FE model parameters and measured vibration data as a normally distributed random variable, a probabilistic damage detection procedure is developed based on perturbation method and validated by Monte Carlo simulation technique. With this technique, the damage probability of each structural element can be determined. The method developed has been verified by applying it to identify the damages of laboratory tested structures. It was proven that, as compared to the deterministic damage identification method, the present method can not only reduce the possibility of false identification, but also give the identification results in terms of probability. which is deemed more realistic and practical in detecting possible damages in a structure. It has also been found that the modal data included in damage identification analysis have a great influence on the identification results. With a sensitivity study, an optimal measurement set for damage detection is determined. This set includes the optimal measurement locations and the most appropriate modes that should be used in the damage identification analysis. Numerical results indicated that if the optimal set determined in a pre-analysis is used in the damage detection better results will be achieved. (author)

Seasonal variability of oxidative stress markers in city bus drivers. Part II. Oxidative damage to lipids and proteins.

Science.gov (United States)

Rossner, Pavel; Svecova, Vlasta; Milcova, Alena; Lnenickova, Zdena; Solansky, Ivo; Sram, Radim J

2008-07-03

The aim of the present study was to investigate the seasonal variability of markers of oxidative damage to lipids (15-F2t-isoprostane, 15-F2t-IsoP) and proteins (protein carbonyl levels) in 50 bus drivers and 50 controls from Prague, Czech Republic, and to identify factors affecting oxidative stress markers. The samples were collected in three seasons with different levels of air pollution. The exposure to environmental pollutants (carcinogenic polycyclic aromatic hydrocarbons, c-PAHs, particulate matter, PM2.5 and PM10, and volatile organic compounds, VOC) was monitored by personal and/or stationary monitors. For the analysis of both markers, ELISA techniques were used. The median levels of individual markers in bus drivers versus controls were as follows: 15-F2t-IsoP (nmol/mmol creatinine): winter 2005, 0.81 versus 0.68 (pbus drivers in winter seasons, but not in summer. Lipid peroxidation was positively correlated with c-PAHs and PM exposure; protein oxidation correlated negatively and was highest in summer suggesting another factor(s) affecting protein carbonyl levels.

Analysis of Boling's laser-damage morphology

International Nuclear Information System (INIS)

Sparks, M.S.

1980-01-01

Boling observed that his total-internal-reflection laser-damage sites in glass closely resembled the scattering cross section for small (ka << 1), perfectly conducting sphere and suggested that a very small plasma formed and grew to a larger size, still with ka << 1 satisfied. Even with ka = 1, for which the cross section is different from that observed, the scattered field still is too small to explain the damage in terms of constructive interference between the incident- and scattered fields. Furthermore, the characteristic shape of the scattering cross section that matches the damage patterns is for circular polarization or unpolarized light, in contrast to the experimental plane polarizations. Extending the ideas to include effects of the scattered field outside the glass, such as plasma formation, and to include the correct field (with interesting polarization, including longitudinal circuler polarization at certain distances from the surface) incident on the sphere may explain the experiments. Additional experiments and analysis would be useful to determine if the extended model is valid and to investigate related materials improvement, nondestructive testing, and the relation between laser damage, plasma initiation, and failure under stress, all initiated at small isolated spots

Simulation model and methodology for calculating the damage by internal radiation in a PWR reactor; Modelo de simulacion y metodologia para el calculo del dano por irradiacion en los internos de un reactor PWR

Energy Technology Data Exchange (ETDEWEB)

Cadenas Mendicoa, A. M.; Benito Hernandez, M.; Barreira Pereira, P.

2012-07-01

This study involves the development of the methodology and three-dimensional models to estimate the damage to the vessel internals of a commercial PWR reactor from irradiation history of operating cycles.

An elastic-visco-plastic damage model: from theory to application

International Nuclear Information System (INIS)

Wang, X.C.; Habraken, A.M.

1996-01-01

An energy-based two-variable damage theory is applied to Bodner's model. It gives an elastic-viscoplastic damage model. Some theoretical details are described in this paper. The parameters identification procedure is discussed and a complete set of parameters for an aluminium is presented. Numerical modelling of the laboratory tests are used to validate the model. An industrial aeronautic rod fabrication process is simulated and some numerical results are presented in this paper. (orig.)

Nonlocal constitutive equations of elasto-visco-plasticity coupled with damage and temperature

Directory of Open Access Journals (Sweden)

Liu Weijie

2016-01-01

Full Text Available In this paper, the nonlocal anisothermal elasto-visco-plastic constitutive equations strongly coupled with ductile isotropic damage, nonlinear isotropic hardening and kinematic hardening are developed to model the material behaviour under finite strain. The new micromorphic variable of damage is introduced into the principle of virtual power and new additional balance equations are obtained. Thermodynamically-consistent nonlocal constitutive equations are then deduced. The evolution equations are deduced from the generalized normality rule for the Norton-Hoff visco-plastic potential. This model is used to simulate various material responses under different velocities at high temperature. The micromorphic parameters of damage: micromorphic density and H moduli are studied to examine the effects of micromorphic damage. Biaxial tension is performed to make a comparison between the local damage model and the micromorphic damage model.

Unified continuum damage model for matrix cracking in composite rotor blades

Energy Technology Data Exchange (ETDEWEB)

Pollayi, Hemaraju; Harursampath, Dineshkumar [Nonlinear Multifunctional Composites - Analysis and Design Lab (NMCAD Lab) Department of Aerospace Engineering Indian Institute of Science Bangalore - 560012, Karnataka (India)

2015-03-10

This paper deals with modeling of the first damage mode, matrix micro-cracking, in helicopter rotor/wind turbine blades and how this effects the overall cross-sectional stiffness. The helicopter/wind turbine rotor system operates in a highly dynamic and unsteady environment leading to severe vibratory loads present in the system. Repeated exposure to this loading condition can induce damage in the composite rotor blades. These rotor/turbine blades are generally made of fiber-reinforced laminated composites and exhibit various competing modes of damage such as matrix micro-cracking, delamination, and fiber breakage. There is a need to study the behavior of the composite rotor system under various key damage modes in composite materials for developing Structural Health Monitoring (SHM) system. Each blade is modeled as a beam based on geometrically non-linear 3-D elasticity theory. Each blade thus splits into 2-D analyzes of cross-sections and non-linear 1-D analyzes along the beam reference curves. Two different tools are used here for complete 3-D analysis: VABS for 2-D cross-sectional analysis and GEBT for 1-D beam analysis. The physically-based failure models for matrix in compression and tension loading are used in the present work. Matrix cracking is detected using two failure criterion: Matrix Failure in Compression and Matrix Failure in Tension which are based on the recovered field. A strain variable is set which drives the damage variable for matrix cracking and this damage variable is used to estimate the reduced cross-sectional stiffness. The matrix micro-cracking is performed in two different approaches: (i) Element-wise, and (ii) Node-wise. The procedure presented in this paper is implemented in VABS as matrix micro-cracking modeling module. Three examples are presented to investigate the matrix failure model which illustrate the effect of matrix cracking on cross-sectional stiffness by varying the applied cyclic load.

Unified continuum damage model for matrix cracking in composite rotor blades

International Nuclear Information System (INIS)

Pollayi, Hemaraju; Harursampath, Dineshkumar

2015-01-01

This paper deals with modeling of the first damage mode, matrix micro-cracking, in helicopter rotor/wind turbine blades and how this effects the overall cross-sectional stiffness. The helicopter/wind turbine rotor system operates in a highly dynamic and unsteady environment leading to severe vibratory loads present in the system. Repeated exposure to this loading condition can induce damage in the composite rotor blades. These rotor/turbine blades are generally made of fiber-reinforced laminated composites and exhibit various competing modes of damage such as matrix micro-cracking, delamination, and fiber breakage. There is a need to study the behavior of the composite rotor system under various key damage modes in composite materials for developing Structural Health Monitoring (SHM) system. Each blade is modeled as a beam based on geometrically non-linear 3-D elasticity theory. Each blade thus splits into 2-D analyzes of cross-sections and non-linear 1-D analyzes along the beam reference curves. Two different tools are used here for complete 3-D analysis: VABS for 2-D cross-sectional analysis and GEBT for 1-D beam analysis. The physically-based failure models for matrix in compression and tension loading are used in the present work. Matrix cracking is detected using two failure criterion: Matrix Failure in Compression and Matrix Failure in Tension which are based on the recovered field. A strain variable is set which drives the damage variable for matrix cracking and this damage variable is used to estimate the reduced cross-sectional stiffness. The matrix micro-cracking is performed in two different approaches: (i) Element-wise, and (ii) Node-wise. The procedure presented in this paper is implemented in VABS as matrix micro-cracking modeling module. Three examples are presented to investigate the matrix failure model which illustrate the effect of matrix cracking on cross-sectional stiffness by varying the applied cyclic load

Metabolite Damage and Metabolite Damage Control in Plants

Energy Technology Data Exchange (ETDEWEB)

Hanson, Andrew D. [Horticultural Sciences Department and; Henry, Christopher S. [Mathematics and Computer Science Division, Argonne National Laboratory, Argonne, Illinois 60439, email:; Computation Institute, University of Chicago, Chicago, Illinois 60637; Fiehn, Oliver [Genome Center, University of California, Davis, California 95616, email:; de Crécy-Lagard, Valérie [Microbiology and Cell Science Department, University of Florida, Gainesville, Florida 32611, email: ,

2016-04-29

It is increasingly clear that (a) many metabolites undergo spontaneous or enzyme-catalyzed side reactions in vivo, (b) the damaged metabolites formed by these reactions can be harmful, and (c) organisms have biochemical systems that limit the buildup of damaged metabolites. These damage-control systems either return a damaged molecule to its pristine state (metabolite repair) or convert harmful molecules to harmless ones (damage preemption). Because all organisms share a core set of metabolites that suffer the same chemical and enzymatic damage reactions, certain damage-control systems are widely conserved across the kingdoms of life. Relatively few damage reactions and damage-control systems are well known. Uncovering new damage reactions and identifying the corresponding damaged metabolites, damage-control genes, and enzymes demands a coordinated mix of chemistry, metabolomics, cheminformatics, biochemistry, and comparative genomics. This review illustrates the above points using examples from plants, which are at least as prone to metabolite damage as other organisms.

International Spinal Cord Injury

DEFF Research Database (Denmark)

Dvorak, M F; Itshayek, E; Fehlings, M G

2015-01-01

STUDY DESIGN: Survey of expert opinion, feedback and final consensus. OBJECTIVE: To describe the development and the variables included in the International Spinal Cord Injury (SCI) Spinal Interventions and Surgical Procedures Basic Data set. SETTING: International working group. METHODS......: A committee of experts was established to select and define data elements. The data set was then disseminated to the appropriate committees and organizations for comments. All suggested revisions were considered and both the International Spinal Cord Society and the American Spinal Injury Association endorsed...... spinal intervention and procedure is coded (variables 1 through 7) and the spinal segment level is described (variables 8 and 9). Sample clinical cases were developed to illustrate how to complete it. CONCLUSION: The International SCI Spinal Interventions and Surgical Procedures Basic Data Set...

Variable Ventilation Improved Respiratory System Mechanics and Ameliorated Pulmonary Damage in a Rat Model of Lung Ischemia-Reperfusion.

Science.gov (United States)

Soluri-Martins, André; Moraes, Lillian; Santos, Raquel S; Santos, Cintia L; Huhle, Robert; Capelozzi, Vera L; Pelosi, Paolo; Silva, Pedro L; de Abreu, Marcelo Gama; Rocco, Patricia R M

2017-01-01

Lung ischemia-reperfusion injury remains a major complication after lung transplantation. Variable ventilation (VV) has been shown to improve respiratory function and reduce pulmonary histological damage compared to protective volume-controlled ventilation (VCV) in different models of lung injury induced by endotoxin, surfactant depletion by saline lavage, and hydrochloric acid. However, no study has compared the biological impact of VV vs. VCV in lung ischemia-reperfusion injury, which has a complex pathophysiology different from that of other experimental models. Thirty-six animals were randomly assigned to one of two groups: (1) ischemia-reperfusion (IR), in which the left pulmonary hilum was completely occluded and released after 30 min; and (2) Sham, in which animals underwent the same surgical manipulation but without hilar clamping. Immediately after surgery, the left (IR-injured) and right (contralateral) lungs from 6 animals per group were removed, and served as non-ventilated group (NV) for molecular biology analysis. IR and Sham groups were further randomized to one of two ventilation strategies: VCV ( n = 6/group) [tidal volume (V T ) = 6 mL/kg, positive end-expiratory pressure (PEEP) = 2 cmH 2 O, fraction of inspired oxygen (FiO 2 ) = 0.4]; or VV, which was applied on a breath-to-breath basis as a sequence of randomly generated V T values ( n = 1200; mean V T = 6 mL/kg), with a 30% coefficient of variation. After 5 min of ventilation and at the end of a 2-h period (Final), respiratory system mechanics and arterial blood gases were measured. At Final, lungs were removed for histological and molecular biology analyses. Respiratory system elastance and alveolar collapse were lower in VCV than VV (mean ± SD, VCV 3.6 ± 1.3 cmH 2 0/ml and 2.0 ± 0.8 cmH 2 0/ml, p = 0.005; median [interquartile range], VCV 20.4% [7.9-33.1] and VV 5.4% [3.1-8.8], p = 0.04, respectively). In left lungs of IR animals, VCV increased the expression of interleukin-6 and

Variable Ventilation Improved Respiratory System Mechanics and Ameliorated Pulmonary Damage in a Rat Model of Lung Ischemia-Reperfusion

Directory of Open Access Journals (Sweden)

Patricia R. M. Rocco

2017-05-01

Full Text Available Lung ischemia-reperfusion injury remains a major complication after lung transplantation. Variable ventilation (VV has been shown to improve respiratory function and reduce pulmonary histological damage compared to protective volume-controlled ventilation (VCV in different models of lung injury induced by endotoxin, surfactant depletion by saline lavage, and hydrochloric acid. However, no study has compared the biological impact of VV vs. VCV in lung ischemia-reperfusion injury, which has a complex pathophysiology different from that of other experimental models. Thirty-six animals were randomly assigned to one of two groups: (1 ischemia-reperfusion (IR, in which the left pulmonary hilum was completely occluded and released after 30 min; and (2 Sham, in which animals underwent the same surgical manipulation but without hilar clamping. Immediately after surgery, the left (IR-injured and right (contralateral lungs from 6 animals per group were removed, and served as non-ventilated group (NV for molecular biology analysis. IR and Sham groups were further randomized to one of two ventilation strategies: VCV (n = 6/group [tidal volume (VT = 6 mL/kg, positive end-expiratory pressure (PEEP = 2 cmH2O, fraction of inspired oxygen (FiO2 = 0.4]; or VV, which was applied on a breath-to-breath basis as a sequence of randomly generated VT values (n = 1200; mean VT = 6 mL/kg, with a 30% coefficient of variation. After 5 min of ventilation and at the end of a 2-h period (Final, respiratory system mechanics and arterial blood gases were measured. At Final, lungs were removed for histological and molecular biology analyses. Respiratory system elastance and alveolar collapse were lower in VCV than VV (mean ± SD, VCV 3.6 ± 1.3 cmH20/ml and 2.0 ± 0.8 cmH20/ml, p = 0.005; median [interquartile range], VCV 20.4% [7.9–33.1] and VV 5.4% [3.1–8.8], p = 0.04, respectively. In left lungs of IR animals, VCV increased the expression of interleukin-6 and intercellular

Calculating externalities from damages in occupational health and safety

Energy Technology Data Exchange (ETDEWEB)

Burtraw, D; Shefftz, J

1994-07-01

This paper surveys the theoretical basis for the possibility that coal miner occupational health and safety damages are not adequately internalized into the production cost of mining coal and thereby impose an external cost on society.

Calculating externalities from damages in occupational health and safety

International Nuclear Information System (INIS)

Burtraw, D.; Shefftz, J.

1994-01-01

This paper surveys the theoretical basis for the possibility that coal miner occupational health and safety damages are not adequately internalized into the production cost of mining coal and thereby impose an external cost on society

26 CFR 1.162-22 - Treble damage payments under the antitrust laws.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Treble damage payments under the antitrust laws... Corporations § 1.162-22 Treble damage payments under the antitrust laws. (a) In general. In the case of a... Federal antitrust laws or enters a plea of guilty or nolo contendere to an indictment or information...

Liability for oil spill damages: issues, methods, and examples

International Nuclear Information System (INIS)

Grigalunas, T.A.; Opaluch, J.J.; Diamantides, J.; Mazzotta, M.

1998-01-01

Liability is an important incentive-based instrument for preventing oil spills and provides a sustainable approach for restoring coastal resources injured by spills. However, the use of liability for environmental damages raises many challenges, including quantification of money measures of damages. In this article, case studies are used to illustrate the issues, methods, and challenges associated with assessing a range of damages, from those that can be measured relatively easily using market information to more 'esoteric', and much more difficult, cases involving non-market-valued losses. Also discussed are issues raised by the new national and international regulatory focus on restoration and by the simplified, compensatory formula used by some states. (author)

A nonlinear CDM based damage growth law for ductile materials

Science.gov (United States)

Gautam, Abhinav; Priya Ajit, K.; Sarkar, Prabir Kumar

2018-02-01

A nonlinear ductile damage growth criterion is proposed based on continuum damage mechanics (CDM) approach. The model is derived in the framework of thermodynamically consistent CDM assuming damage to be isotropic. In this study, the damage dissipation potential is also derived to be a function of varying strain hardening exponent in addition to damage strain energy release rate density. Uniaxial tensile tests and load-unload-cyclic tensile tests for AISI 1020 steel, AISI 1030 steel and Al 2024 aluminum alloy are considered for the determination of their respective damage variable D and other parameters required for the model(s). The experimental results are very closely predicted, with a deviation of 0%-3%, by the proposed model for each of the materials. The model is also tested with predictabilities of damage growth by other models in the literature. Present model detects the state of damage quantitatively at any level of plastic strain and uses simpler material tests to find the parameters of the model. So, it should be useful in metal forming industries to assess the damage growth for the desired deformation level a priori. The superiority of the new model is clarified by the deviations in the predictability of test results by other models.

International responsibility of using nuclear energy for peaceful purposes

International Nuclear Information System (INIS)

Ouenat, N.

2008-01-01

Although the stability of the idea of international responsibility in public international law, the international jurisprudence has not settled on a definition. The concept of international responsibility is no longer limited to the legal effects or consequences under international law to violate its provisions. The states recognized that the customary principles governing the international responsibility in public international law does not take into account the specificities of nuclear dangers, this sought to conclude a number of international conventions include a special system of nuclear liability not based on the wrongful act, but on the principle of keeping things, and it requires the existence of an international regime for nuclear liability in order to establish measures and procedures to achieve the implementation of the provisions for compensation unhindered by national legal systems. There is no doubt that the use of nuclear energy in time of peace falls within the scope of internationally prohibited acts. Atomic activities undertaken by the State within its borders for peaceful purposes are considered legitimate activities as long as they have taken necessary measures to avoid damage to neighboring countries. States has tended to conclude international agreements under which disputes that may result from the use of nuclear energy can be solved. The existing international legal framework on Civil Liability for Nuclear Damage consists of three major interrelated agreements: Paris Convention on civil liability in the field of nuclear energy, Vienna Convention on Civil Liability for civil damages and the Brussels Convention on Civil Liability in the Field of Maritime Carriage of Nuclear Materials.

Impact of air pollution and genotype variability on DNA damage in Prague policemen

Czech Academy of Sciences Publication Activity Database

Novotná, Božena; Topinka, Jan; Solanský, I.; Chvátalová, Irena; Lněničková, Zdena; Šrám, Radim

2007-01-01

Roč. 172, - (2007), s. 37-47 ISSN 0378-4274 R&D Projects: GA MŽP SL/5/160/05 Institutional research plan: CEZ:AV0Z50390512 Keywords : oxidative DNA damage * comet assay * carcinogenic polycyclic aromatic hydrocarbons Subject RIV: DN - Health Impact of the Environment Quality Impact factor: 2.826, year: 2007

Development and anneal of radiation damage in salt

International Nuclear Information System (INIS)

Garcia Celma, A.; Donker, H.; Soppe, W.J.; Miralles, L.

1993-12-01

Laboratory gamma-irradiations at a constant temperature (100 C) were carried out in two sorts of experiments, one at variable and another at approximately constant dose rates. The damage developed during irradiation was analyzed by thermal analysis, microstructural analysis and small angle neutron scattering. The results were compared with the yields of the Jain-Lidiard model for each experiment. Experiments at a constant dose rate were planned to obtain information on radiation damage development and anneal in conditions as near as possible to those of radioactive waste repository concepts. For this reason the dose rates were kept low. (orig./DG)

Wheat grain mechanical vulnerability to mechanical damage in light of the recent agrophysical research

International Nuclear Information System (INIS)

Grundas, S.

1995-01-01

The paper contains basic information on mechanical damage to wheat grains. The most important causes of mechanical damage and some of its effects in manufacturing are discussed. Grain material included 5 varieties of winter wheat and 2 varieties of spring wheat. Internal mechanical damage was examined by X-ray technique; external damage was examined with the colorimeter method. The results obtained were compared with the estimation results of more important processing features of the grain: gluten quantity and quality and grain hardness. (author)

The modulation of EEG variability between internally- and externally-driven cognitive states varies with maturation and task performance.

Directory of Open Access Journals (Sweden)

Jessie M H Szostakiwskyj

Full Text Available Increasing evidence suggests that brain signal variability is an important measure of brain function reflecting information processing capacity and functional integrity. In this study, we examined how maturation from childhood to adulthood affects the magnitude and spatial extent of state-to-state transitions in brain signal variability, and how this relates to cognitive performance. We looked at variability changes between resting-state and task (a symbol-matching task with three levels of difficulty, and within trial (fixation, post-stimulus, and post-response. We calculated variability with multiscale entropy (MSE, and additionally examined spectral power density (SPD from electroencephalography (EEG in children aged 8-14, and in adults aged 18-33. Our results suggest that maturation is characterized by increased local information processing (higher MSE at fine temporal scales and decreased long-range interactions with other neural populations (lower MSE at coarse temporal scales. Children show MSE changes that are similar in magnitude, but greater in spatial extent when transitioning between internally- and externally-driven brain states. Additionally, we found that in children, greater changes in task difficulty were associated with greater magnitude of modulation in MSE. Our results suggest that the interplay between maturational and state-to-state changes in brain signal variability manifest across different spatial and temporal scales, and influence information processing capacity in the brain.

Predictions of Poisson's ratio in cross-ply laminates containing matrix cracks and delaminations

Science.gov (United States)

Harris, Charles E.; Allen, David H.; Nottorf, Eric W.

1989-01-01

A damage-dependent constitutive model for laminated composites has been developed for the combined damage modes of matrix cracks and delaminations. The model is based on the concept of continuum damage mechanics and uses second-order tensor valued internal state variables to represent each mode of damage. The internal state variables are defined as the local volume average of the relative crack face displacements. Since the local volume for delaminations is specified at the laminate level, the constitutive model takes the form of laminate analysis equations modified by the internal state variables. Model implementation is demonstrated for the laminate engineering modulus E(x) and Poisson's ratio nu(xy) of quasi-isotropic and cross-ply laminates. The model predictions are in close agreement to experimental results obtained for graphite/epoxy laminates.

The application of an internal state variable model to the viscoplastic behavior of irradiated ASTM 304L stainless steel

Energy Technology Data Exchange (ETDEWEB)

McAnulty, Michael J., E-mail: mcanulmj@id.doe.gov [Department of Energy, 1955 Fremont Avenue, Idaho Falls, ID 83402 (United States); Potirniche, Gabriel P. [Mechanical Engineering Department, University of Idaho, Moscow, ID 83844 (United States); Tokuhiro, Akira [Mechanical Engineering Department, University of Idaho, Idaho Falls, ID 83402 (United States)

2012-09-15

Highlights: Black-Right-Pointing-Pointer An internal state variable approach is used to predict the plastic behavior of irradiated metals. Black-Right-Pointing-Pointer The model predicts uniaxial tensile test data for irradiated 304L stainless steel. Black-Right-Pointing-Pointer The model is implemented as a user-defined material subroutine in the finite element code ABAQUS. Black-Right-Pointing-Pointer Results are compared for the unirradiated and irradiated specimens loaded in uniaxial tension. - Abstract: Neutron irradiation of metals results in decreased fracture toughness, decreased ductility, increased yield strength and increased ductile-to-brittle transition temperature. Designers use the most limiting material properties throughout the reactor vessel lifetime to determine acceptable safety margins. To reduce analysis conservatism, a new model is proposed based on an internal state variable approach for the plastic behavior of unirradiated ductile materials to support its use for analyzing irradiated materials. The proposed modeling addresses low temperature irradiation of 304L stainless steel, and predicts uniaxial tensile test data of irradiated experimental specimens. The model was implemented as a user-defined material subroutine (UMAT) in the finite element software ABAQUS. Results are compared between the unirradiated and irradiated specimens subjected to tension tests.

Regulation of DNA Alkylation Damage Repair: Lessons and Therapeutic Opportunities.

Science.gov (United States)

Soll, Jennifer M; Sobol, Robert W; Mosammaparast, Nima

2017-03-01

Alkylation chemotherapy is one of the most widely used systemic therapies for cancer. While somewhat effective, clinical responses and toxicities of these agents are highly variable. A major contributing factor for this variability is the numerous distinct lesions that are created upon alkylation damage. These adducts activate multiple repair pathways. There is mounting evidence that the individual pathways function cooperatively, suggesting that coordinated regulation of alkylation repair is critical to prevent toxicity. Furthermore, some alkylating agents produce adducts that overlap with newly discovered methylation marks, making it difficult to distinguish between bona fide damaged bases and so-called 'epigenetic' adducts. Here, we discuss new efforts aimed at deciphering the mechanisms that regulate these repair pathways, emphasizing their implications for cancer chemotherapy. Copyright © 2016 Elsevier Ltd. All rights reserved.

Cellular Internalization of Fibroblast Growth Factor-12 Exerts Radioprotective Effects on Intestinal Radiation Damage Independently of FGFR Signaling

Energy Technology Data Exchange (ETDEWEB)

Nakayama, Fumiaki, E-mail: f_naka@nirs.go.jp [Advanced Radiation Biology Research Program, Research Center for Charged Particle Therapy, Chiba (Japan); Umeda, Sachiko [Advanced Radiation Biology Research Program, Research Center for Charged Particle Therapy, Chiba (Japan); Yasuda, Takeshi [Radiation Emergency Medicine Research Program, Research Center for Radiation Emergency Medicine, National Institute of Radiological Sciences, Chiba (Japan); Fujita, Mayumi [Advanced Radiation Biology Research Program, Research Center for Charged Particle Therapy, Chiba (Japan); Asada, Masahiro [Signaling Molecules Research Group, Biomedical Research Institute, National Institute of Advanced Industrial Science and Technology, Tsukuba (Japan); Meineke, Viktor [Bundeswehr Institute of Radiobiology affiliated to the University of Ulm, Munich (Germany); Imamura, Toru [Signaling Molecules Research Group, Biomedical Research Institute, National Institute of Advanced Industrial Science and Technology, Tsukuba (Japan); Imai, Takashi [Advanced Radiation Biology Research Program, Research Center for Charged Particle Therapy, Chiba (Japan)

2014-02-01

Purpose: Several fibroblast growth factors (FGFs) were shown to inhibit radiation-induced tissue damage through FGF receptor (FGFR) signaling; however, this signaling was also found to be involved in the pathogenesis of several malignant tumors. In contrast, FGF12 cannot activate any FGFRs. Instead, FGF12 can be internalized readily into cells using 2 cell-penetrating peptide domains (CPP-M, CPP-C). Therefore, this study focused on clarifying the role of FGF12 internalization in protection against radiation-induced intestinal injury. Methods and Materials: Each FGF or peptide was administered intraperitoneally to BALB/c mice in the absence of heparin 24 hours before or after total body irradiation with γ rays at 9 to 12 Gy. Several radioprotective effects were examined in the jejunum. Results: Administration of FGF12 after radiation exposure was as effective as pretreatment in significantly promoting intestinal regeneration, proliferation of crypt cells, and epithelial differentiation. Two domains, comprising amino acid residues 80 to 109 and 140 to 169 of FGF12B, were identified as being responsible for the radioprotective activity, so that deletion of both domains from FGF12B resulted in a reduction in activity. Interestingly, these regions included the CPP-M and CPP-C domains, respectively; however, CPP-C by itself did not show an antiapoptotic effect. In addition, FGF1, prototypic FGF, possesses a domain corresponding to CPP-M, whereas it lacks CPP-C, so the fusion of FGF1 with CPP-C (FGF1/CPP-C) enhanced cellular internalization and increased radioprotective activity. However, FGF1/CPP-C reduced in vitro mitogenic activity through FGFRs compared with FGF1, implying that FGFR signaling might not be essential for promoting the radioprotective effect of FGF1/CPP-C. In addition, internalized FGF12 suppressed the activation of p38α after irradiation, resulting in reduced radiation-induced apoptosis. Conclusions: These findings indicate that FGF12 can protect the

International Variability in Gastrointestinal Decontamination With Acute Poisonings.

Science.gov (United States)

Mintegi, Santiago; Dalziel, Stuart R; Azkunaga, Beatriz; Prego, Javier; Arana-Arri, Eunate; Acedo, Yordana; Martinez-Indart, Lorea; Benito, Javier; Kuppermann, Nathan

2017-08-01

Identifying international differences in the management of acute pediatric poisonings may help improve the quality of care. The objective of this study was to assess the international variation and appropriateness of gastrointestinal decontamination (GID) procedures performed in children and adolescents who present with acute poisonings to emergency departments. This was an international, multicenter, cross-sectional prospective study including children poisoning exposures presenting to 105 emergency departments in 20 countries from 8 global regions belonging to the Pediatric Emergency Research Networks. Data collection started between January and September 2013 and continued for 1 year. The appropriateness of GID procedures performed was analyzed using the American Academy of Clinical Toxicology and the European Association of Poisons Centres and Clinical Toxicologists' recommendations. Multivariate logistic regression was performed to identify independent risk factors for performing GID procedures. We included 1688 patients, 338 of whom (20.0%, 95% confidence interval 18.1%-22.0%) underwent the following GID procedures: activated charcoal (166, 49.1%), activated charcoal and gastric lavage (122, 36.1%), gastric lavage (47, 13.9%), and ipecac (3, 0.9%). In 155 (45.8%, 40.5%-51.2%), the GID procedure was considered appropriate, with significant differences between regions. Independent risk factors for GID procedures included age, toxin category, mechanism of poisoning, absence of symptoms, and the region where the intoxication occurred ( P management of pediatric poisonings. International best practices need to be better implemented. Copyright © 2017 by the American Academy of Pediatrics.

Radiation damage in biomolecular systems

CERN Document Server

Fuss, Martina Christina

2012-01-01

Since the discovery of X-rays and radioactivity, ionizing radiations have been widely applied in medicine both for diagnostic and therapeutic purposes. The risks associated with radiation exposure and handling led to the parallel development of the field of radiation protection. Pioneering experiments done by Sanche and co-workers in 2000 showed that low-energy secondary electrons, which are abundantly generated along radiation tracks, are primarily responsible for radiation damage through successive interactions with the molecular constituents of the medium. Apart from ionizing processes, which are usually related to radiation damage, below the ionization level low-energy electrons can induce molecular fragmentation via dissociative processes such as internal excitation and electron attachment. This prompted collaborative projects between different research groups from European countries together with other specialists from Canada,  the USA and Australia. This book summarizes the advances achieved by these...

Potential bud bank responses to apical meristem damage and environmental variables: matching or complementing axillary meristems?

Science.gov (United States)

Klimešová, Jitka; Malíková, Lenka; Rosenthal, Jonathan; Šmilauer, Petr

2014-01-01

Soil nutrients, dormant axillary meristem availability, and competition can influence plant tolerance to damage. However, the role of potential bud banks (adventitious meristems initiated only after injury) is not known. Examining Central European field populations of 22 species of short-lived monocarpic herbs exposed to various sources of damage, we hypothesized that: (1) with increasing injury severity, the number of axillary branches would decrease, due to axillary meristem limitation, whereas the number of adventitious shoots (typically induced by severe injury) would increase; (2) favorable environmental conditions would allow intact plants to branch more, resulting in stronger axillary meristem limitation than in unfavorable conditions; and (3) consequently, adventitious sprouting would be better enabled in favorable than unfavorable conditions. We found strong support for the first hypothesis, only limited support for the second, and none for the third. Our results imply that whereas soil nutrients and competition marginally influence plant tolerance to damage, potential bud banks enable plants to overcome meristem limitation from severe damage, and therefore better tolerate it. All the significant effects were found in intraspecific comparisons, whereas interspecific differences were not found. Monocarpic plants with potential bud banks therefore represent a distinct strategy occupying a narrow environmental niche. The disturbance regime typical for this niche remains to be examined, as do the costs associated with the banks of adventitious and axillary reserve meristems.

Potential bud bank responses to apical meristem damage and environmental variables: matching or complementing axillary meristems?

Directory of Open Access Journals (Sweden)

Jitka Klimešová

Full Text Available Soil nutrients, dormant axillary meristem availability, and competition can influence plant tolerance to damage. However, the role of potential bud banks (adventitious meristems initiated only after injury is not known. Examining Central European field populations of 22 species of short-lived monocarpic herbs exposed to various sources of damage, we hypothesized that: (1 with increasing injury severity, the number of axillary branches would decrease, due to axillary meristem limitation, whereas the number of adventitious shoots (typically induced by severe injury would increase; (2 favorable environmental conditions would allow intact plants to branch more, resulting in stronger axillary meristem limitation than in unfavorable conditions; and (3 consequently, adventitious sprouting would be better enabled in favorable than unfavorable conditions. We found strong support for the first hypothesis, only limited support for the second, and none for the third. Our results imply that whereas soil nutrients and competition marginally influence plant tolerance to damage, potential bud banks enable plants to overcome meristem limitation from severe damage, and therefore better tolerate it. All the significant effects were found in intraspecific comparisons, whereas interspecific differences were not found. Monocarpic plants with potential bud banks therefore represent a distinct strategy occupying a narrow environmental niche. The disturbance regime typical for this niche remains to be examined, as do the costs associated with the banks of adventitious and axillary reserve meristems.

Applications of seismic damage hazard analysis for the qualification of existing nuclear and offshore facilities

International Nuclear Information System (INIS)

Bazzurro, P.; Manfredini, G.M.; Diaz Molina, I.

1995-01-01

The Seismic Damage Hazard Analysis (SDHA) is a methodology which couples conventional Seismic Hazard Analysis (SHA) and non-linear response analysis to seismic loadings. This is a powerful tool in the retrofit process: SDHA permits the direct computation of the probability of occurrence of damage and, eventually, collapse of existing and upgraded structural systems. The SDHA methodology is a significant step towards a better understanding and quantification of structural seismic risk. SDHA incorporates and explicitly accounts for seismic load variability, seismic damage potential variability and structural resistance uncertainty. In addition, SDHA makes available a sound strategy to perform non-linear dynamic analyses. A limited number of non-linear dynamic analyses is sufficient to obtain estimates of damage and its probability of occurrence. The basic concepts of the SDHA methodology are briefly reviewed. Illustrative examples are presented, regarding a power house structure, a tubular structure and seabed slope stability problem. (author)

Pengaruh Pemasaran Internal dan Kualitas Layanan Internal Terhadap Kepuasan Pelanggan Internal (Studi Pada Industri Kepariwisataan di Daerah Istimewa Yogyakarta)

OpenAIRE

Jumadi Jumadi

2016-01-01

The aim of this research is to investigate the implication of internal marketing and internal service quality effectivity towards internal customer satisfaction in Tourism Industry in Yogyakarta Special Territory. This internal marketing studyinvolves variables of motivation and reward system, effective communication, effective employee's selection, effective recruitment, effective development, effective support system, and healthy work environment. While the internal quality service aspects ...

Formulation and computational aspects of plasticity and damage models with application to quasi-brittle materials

Energy Technology Data Exchange (ETDEWEB)

Chen, Z.; Schreyer, H.L. [New Mexico Engineering Research Institute, Albuquerque, NM (United States)

1995-09-01

The response of underground structures and transportation facilities under various external loadings and environments is critical for human safety as well as environmental protection. Since quasi-brittle materials such as concrete and rock are commonly used for underground construction, the constitutive modeling of these engineering materials, including post-limit behaviors, is one of the most important aspects in safety assessment. From experimental, theoretical, and computational points of view, this report considers the constitutive modeling of quasi-brittle materials in general and concentrates on concrete in particular. Based on the internal variable theory of thermodynamics, the general formulations of plasticity and damage models are given to simulate two distinct modes of microstructural changes, inelastic flow and degradation of material strength and stiffness, that identify the phenomenological nonlinear behaviors of quasi-brittle materials. The computational aspects of plasticity and damage models are explored with respect to their effects on structural analyses. Specific constitutive models are then developed in a systematic manner according to the degree of completeness. A comprehensive literature survey is made to provide the up-to-date information on prediction of structural failures, which can serve as a reference for future research.

Anisotropic 3D delay-damage model to simulate concrete structures

OpenAIRE

Gatuingt , Fabrice; Desmorat , Rodrigue; Chambart , Marion; Combescure , Didier; Guilbaud , Daniel

2008-01-01

International audience; High dynamic loadings lead to material degradation and structural failure. This is even more the case for concrete structures where the parts initially in compression break in ten- sion due to waves propagation and reflection. The dissymmetry of the material behavior plays a major role in such cases, dissymmetry mainly due to damage induced anisotropy. Loading induced damage is most often anisotropic and one proposes here to take advantage of such a feature to build a ...

Damage identification on spatial Timoshenko arches by means of genetic algorithms

Science.gov (United States)

Greco, A.; D'Urso, D.; Cannizzaro, F.; Pluchino, A.

2018-05-01

In this paper a procedure for the dynamic identification of damage in spatial Timoshenko arches is presented. The proposed approach is based on the calculation of an arbitrary number of exact eigen-properties of a damaged spatial arch by means of the Wittrick and Williams algorithm. The proposed damage model considers a reduction of the volume in a part of the arch, and is therefore suitable, differently than what is commonly proposed in the main part of the dedicated literature, not only for concentrated cracks but also for diffused damaged zones which may involve a loss of mass. Different damage scenarios can be taken into account with variable location, intensity and extension of the damage as well as number of damaged segments. An optimization procedure, aiming at identifying which damage configuration minimizes the difference between its eigen-properties and a set of measured modal quantities for the structure, is implemented making use of genetic algorithms. In this context, an initial random population of chromosomes, representing different damage distributions along the arch, is forced to evolve towards the fittest solution. Several applications with different, single or multiple, damaged zones and boundary conditions confirm the validity and the applicability of the proposed procedure even in presence of instrumental errors on the measured data.

Climate policy: Transparency for Loss and Damage

Science.gov (United States)

Mechler, Reinhard

2017-10-01

Loss and Damage (L&D) has been gaining traction since the Paris Agreement took the issue on as a separate article, arguably creating a third pillar of international climate policy. Debate so far has led to vague definitions of the remit of the L&D mechanism; research on actor perspectives may help to propel this discourse forward.

Damage evolution during fatigue in structural materials

Czech Academy of Sciences Publication Activity Database

Polák, Jaroslav; Man, Jiří; Petrenec, Martin

2012-01-01

Roč. 1, August (2012), s. 3-12 ISSN 2211-8128. [International Congress on Metallurgy and Materials - SAM/CONAMET 2011 /11./. Rosario, 18.10.2011-21.10.2011] R&D Projects: GA ČR GA106/09/1954 Institutional support: RVO:68081723 Keywords : cyclic plasticity * crack nucleation * crack growth * fatigue damage Subject RIV: JL - Materials Fatigue, Friction Mechanics

Damaging Rainfall and Flooding. The Other Sahel Hazards

Energy Technology Data Exchange (ETDEWEB)

Tarhule, A. [Department of Geography, University of Oklahoma, 100 East Boyd Street, Norman, OK, 73079 (United States)

2005-10-01

Damaging rainfall and rain-induced flooding occur from time to time in the drought-prone Sahel savannah zone of Niger in West Africa but official records of these events and their socioeconomic impacts do not exist. This paper utilized newspaper accounts between 1970 and 2000 to survey and illustrate the range of these flood hazards in the Sahel. During the study interval, 53 newspaper articles reported 79 damaging rainfall and flood events in 47 different communities in the Sahel of Niger. Collectively, these events destroyed 5,580 houses and rendered 27,289 people homeless. Cash losses and damage to infrastructure in only three events exceeded $4 million. Sahel residents attribute these floods to five major causes including both natural and anthropogenic, but they view the flood problem as driven primarily by land use patterns. Despite such awareness, traditional coping strategies appear inadequate for dealing with the problems in part because of significant climatic variability. Analysis of several rainfall measures indicates that the cumulative rainfall in the days prior to a heavy rain event is an important factor influencing whether or not heavy rainfall results in flooding. Thus, despite some limitations, newspaper accounts of historical flooding are largely consistent with measured climatic variables. The study demonstrates that concerted effort is needed to improve the status of knowledge concerning flood impacts and indeed other natural and human hazards in the Sahel.

X-ray microtomography of damage in particle-reinforced metal matrix composites

International Nuclear Information System (INIS)

Mummery, P.M.; Derby, B.; Anderson, P.; Davis, G.; Elliott, J.C.

1993-01-01

The damage which occurs on plastic straining of silicon carbide particle-reinforced aluminium alloys has been characterised using x-ray microtomography. The technique is used to provide density measurements as a function of strain in addition to imaging the internal structure with a resolution of ∼15μm. This allows a much more accurate determination of microstructural damage in terms of void growth than is available from measurements of density using buoyancy methods or from elastic modulus decrease. These data can be combined with acoustic emission measurements during straining to allow damage nucleation and growth contributions to be separated. (orig.)

Simulation of Anisotropic Rock Damage for Geologic Fracturing

Science.gov (United States)

Busetti, S.; Xu, H.; Arson, C. F.

2014-12-01

A continuum damage model for differential stress-induced anisotropic crack formation and stiffness degradation is used to study geologic fracturing in rocks. The finite element-based model solves for deformation in the quasi-linear elastic domain and determines the six component damage tensor at each deformation increment. The model permits an isotropic or anisotropic intact or pre-damaged reference state, and the elasticity tensor evolves depending on the stress path. The damage variable, similar to Oda's fabric tensor, grows when the surface energy dissipated by three-dimensional opened cracks exceeds a threshold defined at the appropriate scale of the representative elementary volume (REV). At the laboratory or wellbore scale (1000m) scales the damaged REV reflects early natural fracturing (background or tectonic fracturing) or shear strain localization (fault process zone, fault-tip damage, etc.). The numerical model was recently benchmarked against triaxial stress-strain data from laboratory rock mechanics tests. However, the utility of the model to predict geologic fabric such as natural fracturing in hydrocarbon reservoirs was not fully explored. To test the ability of the model to predict geological fracturing, finite element simulations (Abaqus) of common geologic scenarios with known fracture patterns (borehole pressurization, folding, faulting) are simulated and the modeled damage tensor is compared against physical fracture observations. Simulated damage anisotropy is similar to that derived using fractured rock-mass upscaling techniques for pre-determined fracture patterns. This suggests that if model parameters are constrained with local data (e.g., lab, wellbore, or reservoir domain), forward modeling could be used to predict mechanical fabric at the relevant REV scale. This reference fabric also can be used as the starting material property to pre-condition subsequent deformation or fluid flow. Continuing efforts are to expand the present damage

Quantifying uncertainty due to internal variability using high-resolution regional climate model simulations

Science.gov (United States)

Gutmann, E. D.; Ikeda, K.; Deser, C.; Rasmussen, R.; Clark, M. P.; Arnold, J. R.

2015-12-01

The uncertainty in future climate predictions is as large or larger than the mean climate change signal. As such, any predictions of future climate need to incorporate and quantify the sources of this uncertainty. One of the largest sources comes from the internal, chaotic, variability within the climate system itself. This variability has been approximated using the 30 ensemble members of the Community Earth System Model (CESM) large ensemble. Here we examine the wet and dry end members of this ensemble for cool-season precipitation in the Colorado Rocky Mountains with a set of high-resolution regional climate model simulations. We have used the Weather Research and Forecasting model (WRF) to simulate the periods 1990-2000, 2025-2035, and 2070-2080 on a 4km grid. These simulations show that the broad patterns of change depicted in CESM are inherited by the high-resolution simulations; however, the differences in the height and location of the mountains in the WRF simulation, relative to the CESM simulation, means that the location and magnitude of the precipitation changes are very different. We further show that high-resolution simulations with the Intermediate Complexity Atmospheric Research model (ICAR) predict a similar spatial pattern in the change signal as WRF for these ensemble members. We then use ICAR to examine the rest of the CESM Large Ensemble as well as the uncertainty in the regional climate model due to the choice of physics parameterizations.

Evaluation of fatigue-ratcheting damage of a pressurised elbow undergoing damage seismic inputs

International Nuclear Information System (INIS)

Dang Van, K.

2000-01-01

We present a simplified method to calculate the plastic ratchet of elbow-shaped pipes submitted to seismic loading and an internal pressure. This method is simplified in the sense that the value of the ratchet is obtained without the use of finite element method (FEM) calculations. Here we derive a formula and use it to evaluate the fatigue-ratcheting damage of an elbow. This approach is applicable to complex plastic response appropriately described by non-linear kinematics hardening, which is more realistic for stainless steel such as 316-L. (orig.)

International Chernobyl project

International Nuclear Information System (INIS)

1991-01-01

The film documents the work of the radiation experts of 8 international organizations in the area around the damaged Chernobyl nuclear power plant. During this evaluation, radiation measurements and medical examinations of the population were carried out and samples of soil, water, plants and food taken

A micromechanical study of the damage mechanics of acrylic particulate composites under thermomechanical loading

Science.gov (United States)

Nie, Shihua

The main aim of this dissertation was to characterize the damage mechanism and fatigue behavior of the acrylic particulate composite. This dissertation also investigated how the failure mechanism is influenced by changes in certain parameters including the volume fraction of particle, the interfacial bonding strength, the stiffness and thickness of the interphase, and the CTE mismatch between the particle and the matrix. Monotonic uniaxial tensile and compressive testing under various temperatures and strain rates, isothermal low-cycle mechanical testing and thermal cycling of a plate with a cutout were performed. The influence of the interfacial bonding strength between the particle and the matrix on the failure mechanism of the ATH filled PMMA was investigated using in situ observations under uniaxial loading conditions. For composites with weak interfacial bonding, the debonding is the major damage mode. For composites with strong interfacial bonding, the breakage of the agglomerate of particles is the major damage mode. Experimental studies also demonstrated the significant influence of interfacial bonding strength on the fatigue life of the ATH filled PMMA. The damage was characterized in terms of the elastic modulus degradation, the load-drop parameter, the plastic strain range and the hysteresis dissipation. Identifying the internal state variables that quantify material degradation under thermomechanical loading is an active research field. In this dissertation, the entropy production, which is a measure of the irreversibility of the thermodynamic system, is used as the metric for damage. The close correlation between the damage measured in terms of elastic modulus degradation and that obtained from the finite element simulation results validates the entropy based damage evolution function. A micromechanical model for acrylic particulate composites with imperfect interfacial bonds was proposed. Acrylic particulate composites are treated as three

A conservative damage accumulation method for the prediction of crack nucleation under variable amplitude loading for austenitic stainless steels

International Nuclear Information System (INIS)

Taheri, Said; Vincent, Ludovic; Leroux, Jean C.

2014-01-01

The application of Miner's rule using a loading issued from a mock-up of a RHR (removal heat system) of PWR plant, made of 304 steel gives a very important non-conservative fatigue lifetime in strain control when strain fatigue curve is used. A large number of test in strain and stress control are performed in different laboratories. Two modeling of literature Smith-Watson-Topper (SWT) and Fatemi-Socie (FS) have been used to simulate these tests. Much better responses than Miner's rule are obtained. However these models need an elastic-plastic constitutive law which is difficult to propose in the presence of high cycle secondary hardening observed in austenitic stainless steels. So a conservative model for fatigue damage accumulation under variable amplitude loading is proposed for austenitic stainless steels (AISI 304, 316) in strain control, which does not need a constitutive law. Linear damage accumulation is used, while, sequence effect is taken into account using the elastic-plastic memory effect through cyclic strain stress curves with pre-hardening. This modeling is based on the fact that for stainless steels, pre-hardening is detrimental for fatigue life in strain control while it is beneficial in stress control. In the case of materials that do not demonstrate load sequence memory the modeling is identical to Miner rule. In the presence of low mean stress, the modeling is approved based on a large number of tests. Moreover the modeling permits to explain the larger detrimental effect of a tension mean stress in strain control tests than in stress control tests. To extend the modeling to higher values of mean stress it is proposed to divide mean stress effect into maximal and 'real' mean stress effects. Extending this work to the case of significant mean stress is ongoing. (authors)

Vibration-based damage detection of structural joints in presence of uncertainty

Directory of Open Access Journals (Sweden)

Al-Bugharbee Hussein

2018-01-01

Full Text Available Early damage detection of structure’s joints is essential in order to ensure the integrity of structures. Vibration-based methods are the most popular way of diagnosing damage in machinery joints. Any technique that is used for such a purpose requires dealing with the variability inherent to the system due to manufacturing tolerances, environmental conditions or aging. The level of variability in vibrational response can be very high for mass-produced complex structures that possess a large number of components. In this study, a simple and efficient time frequency method is proposed for detection of damage in connecting joints. The method suggests using singular spectrum analysis for building a reference space from the signals measured on a healthy structure and then compares all other signals to that reference space in order to detect the presence of faults. A model of two plates connected by a series of mounts is used to examine the effectiveness of the method where the uncertainty in the mount properties is taken into account to model the variability in the built-up structure. The motivation behind the simplified model is to identify the faulty mounts in trim-structure joints of an automotive vehicle where a large number of simple plastic clips are used to connect the trims to the vehicle structure.

Damage-induced tensile instability

International Nuclear Information System (INIS)

Hult, J.

1975-01-01

The paper presents a unified description of ductile and brittle rupture phenomena in structural components under tensile loading with particular emphasis on creep rupture. Two structural elements are analyzed in detail: 1) the uniform tensile bar subject to a Heaviside history of tensile force and superimposed such loadings, i.e. staircase histories, and 2) the thinwalled spherical pressure vessel subject to a Heaviside history of internal pressure. For both these structures the conditions for instantaneous as well as delayed rupture are analysed. It is shown that a state of mechanical instability will be reached at a certain load or after a certain time. The cases of purely ductile rupture and purely brittle fracture are identified as two limiting cases of this general instability phenomenon. The Kachanov-Rabotnov damage law implies that a structural component will fail in tension only when it has reached a state of complete damage, i.e. zero load carrying capacity. The extended law predicts failure at an earlier stage of the deterioration process and is therefore more compatible with experimental observation. Further experimental support is offered by predictions for staircase loading histories, both step-up and step-down type. The presented damage theory here predicts strain histories which are in closer agreement with test data than predictions based on other phenomenological theories

An economic approach to 'losses and damages'

International Nuclear Information System (INIS)

Roulleau, Thomas

2015-01-01

Given ever more greenhouse gas emissions, developing countries have recently placed the issue of 'losses and damages' on the bargaining table. The losses and damages ensuing from climate catastrophes depend on factors that are both planetary (extreme meteorological phenomena wherein climate change is a factor) and domestic (the exposure and vulnerability of populations). The Warsaw International Mechanism for Loss and Damage Associated with Climate Change Impacts was set up in 2013. Several developing countries are demanding that it become autonomous with its own funding. This demand does not seem justified scientifically or economically in the current context. Although economic losses owing to climate-related catastrophes have increased in recent decades, they are, as scientific studies have shown, due to increases in wealth and in the population's exposure and not to climate change as such. Furthermore, the aforementioned funding mechanism risks impeding efficient domestic actions for reducing a country's vulnerability and its population's exposure to climate-related risks

Detecting Damage in Composite Material Using Nonlinear Elastic Wave Spectroscopy Methods

Science.gov (United States)

Meo, Michele; Polimeno, Umberto; Zumpano, Giuseppe

2008-05-01

Modern aerospace structures make increasing use of fibre reinforced plastic composites, due to their high specific mechanical properties. However, due to their brittleness, low velocity impact can cause delaminations beneath the surface, while the surface may appear to be undamaged upon visual inspection. Such damage is called barely visible impact damage (BVID). Such internal damages lead to significant reduction in local strengths and ultimately could lead to catastrophic failures. It is therefore important to detect and monitor damages in high loaded composite components to receive an early warning for a well timed maintenance of the aircraft. Non-linear ultrasonic spectroscopy methods are promising damage detection and material characterization tools. In this paper, two different non-linear elastic wave spectroscopy (NEWS) methods are presented: single mode nonlinear resonance ultrasound (NRUS) and nonlinear wave modulation technique (NWMS). The NEWS methods were applied to detect delamination damage due to low velocity impact (<12 J) on various composite plates. The results showed that the proposed methodology appear to be highly sensitive to the presence of damage with very promising future NDT and structural health monitoring applications.

Effects of microwave pulse-width damage on a bipolar transistor

International Nuclear Information System (INIS)

Ma Zhen-Yang; Chai Chang-Chun; Ren Xing-Rong; Yang Yin-Tang; Chen Bin; Zhao Ying-Bo

2012-01-01

This paper presents a theoretical study of the pulse-width effects on the damage process of a typical bipolar transistor caused by high power microwaves (HPMs) through the injection approach. The dependences of the microwave damage power, P, and the absorbed energy, E, required to cause the device failure on the pulse width τ are obtained in the nanosecond region by utilizing the curve fitting method. A comparison of the microwave pulse damage data and the existing dc pulse damage data for the same transistor is carried out. By means of a two-dimensional simulator, ISE-TCAD, the internal damage processes of the device caused by microwave voltage signals and dc pulse voltage signals are analyzed comparatively. The simulation results suggest that the temperature-rising positions of the device induced by the microwaves in the negative and positive half periods are different, while only one hot spot exists under the injection of dc pulses. The results demonstrate that the microwave damage power threshold and the absorbed energy must exceed the dc pulse power threshold and the absorbed energy, respectively. The dc pulse damage data may be useful as a lower bound for microwave pulse damage data. (interdisciplinary physics and related areas of science and technology)

Internalization of Sexism, Racism & Classism in Damaged Parenting: A Developmental Dialectical Model.

Science.gov (United States)

Pakizegi, B.

This paper examines the relevance of social structure, in terms of class, race, and gender, in the lives of damaged parents of low power positions who abuse or neglect their children. The predominant view in the understanding and treatment of abusive parents stresses the parent's poor childhood experiences and the "intergenerational…

The Effects of Mitigation Measures on Flood Damage Prevention in Korea

Directory of Open Access Journals (Sweden)

Cheol-Hee Son

2015-12-01

Full Text Available This study analyzed the characteristics of flood damages and the effects of structural and non-structural flood damage mitigation measures in Korea. First, a theoretical discussion of the structural and non-structural measures to mitigate flood damages was used to select the variables and devise the hypotheses. An analysis was conducted using the Auto-Regressive Integrated Moving-Average (ARIMA time series methodology, Korean socioeconomic data, and damage characteristics of major flood events. The effects of flood damage mitigation measures on the extent of flood damages were assessed using an intervention time series model. The major findings were that the intervention effects of structural and non-structural measures were statistically significant from 1958 to 2013 (a period of 55 years and that while the former were ineffective at mitigating flood damages, the latter were successful in doing so. Based on the above findings, policy suggestions for future flood damage mitigation measures in Korea were offered. For structural measures, the government should manage its existing facilities, recover ecosystems of damaged rivers, and devise mitigation measures for urban areas. For non-structural measures, the government should enhance its flood forecasting capacity, revise laws related to flood control and prevention, and update and rationalize land-use plans.

Vibration-Based Damage Detection in Beams by Cooperative Coevolutionary Genetic Algorithm

Directory of Open Access Journals (Sweden)

Kittipong Boonlong

2014-03-01

Full Text Available Vibration-based damage detection, a nondestructive method, is based on the fact that vibration characteristics such as natural frequencies and mode shapes of structures are changed when the damage happens. This paper presents cooperative coevolutionary genetic algorithm (CCGA, which is capable for an optimization problem with a large number of decision variables, as the optimizer for the vibration-based damage detection in beams. In the CCGA, a minimized objective function is a numerical indicator of differences between vibration characteristics of the actual damage and those of the anticipated damage. The damage detection in a uniform cross-section cantilever beam, a uniform strength cantilever beam, and a uniform cross-section simply supported beam is used as the test problems. Random noise in the vibration characteristics is also considered in the damage detection. In the simulation analysis, the CCGA provides the superior solutions to those that use standard genetic algorithms presented in previous works, although it uses less numbers of the generated solutions in solution search. The simulation results reveal that the CCGA can efficiently identify the occurred damage in beams for all test problems including the damage detection in a beam with a large number of divided elements such as 300 elements.

Damage detection of simply supported reinforced concrete beam by S transform

Science.gov (United States)

Liu, Ning; Xi, Jiaxin; Zhang, Xuebing; Liu, Zhenzhou

2017-08-01

Signal processing is the key component of vibration-based structural damage detection. The S transform is variable window of short time Fourier transform (STFT) or an extension of wavelet transform (WT). The goal of using S transform is to extract subtle changes in the vibration signals in order to detect and quantify the damage in the structure. This paper presents the concentrated load is applied to the simply supported reinforced concrete beam and adopting the stepwise loading method, the vibration signals of each loading and unloading state is obtained by using the hammer impact. Then the vibration data of the reinforced concrete beam pre-damage and post-damage is analysed by S transform. Experimental result shows the potential ability of S transform in identifying peak energy changes and multiple reflections with different loading force state.

On a model of mixtures with internal variables: Extended Liu procedure for the exploitation of the entropy principle

Directory of Open Access Journals (Sweden)

Francesco Oliveri

2016-01-01

Full Text Available The exploitation of second law of thermodynamics for a mixture of two fluids with a scalar internal variable and a first order nonlocal state space is achieved by using the extended Liu approach. This method requires to insert as constraints in the entropy inequality either the field equations or their gradient extensions. Consequently, the thermodynamic restrictions imposed by the entropy principle are derived without introducing extra terms neither in the energy balance equation nor in the entropy inequality.

Compensation for damages in case of a nuclear accident

International Nuclear Information System (INIS)

Leger, M.

2011-01-01

This article presents the system of compensation for damages in case of a nuclear accident. This system of civil liability for nuclear damage, as a specific regime, departs on several points from the common rules of civil liability, in order to provide an adequate and equitable compensation for the damages suffered by the victims of nuclear accidents. The French system of civil liability for nuclear damage results from two International Conventions integrated in French law (Paris convention 1960 and Brussels convention 1963) and the French law of 1968, October 30 on civil liability in the area of nuclear energy. These texts define the conditions under which a nuclear operator could be held liable in case of a nuclear accident. The protocols to amend the Paris and Brussels Conventions of 2004, not yet come into force, are also presented. They ensure that increased resources are available to compensate a greater number of victims of a nuclear accident. (author)

Surface Irregularity Factor as a Parameter to Evaluate the Fatigue Damage State of CFRP

Directory of Open Access Journals (Sweden)

Pablo Zuluaga-Ramírez

2015-11-01

Full Text Available This work presents an optical non-contact technique to evaluate the fatigue damage state of CFRP structures measuring the irregularity factor of the surface. This factor includes information about surface topology and can be measured easily on field, by techniques such as optical perfilometers. The surface irregularity factor has been correlated with stiffness degradation, which is a well-accepted parameter for the evaluation of the fatigue damage state of composite materials. Constant amplitude fatigue loads (CAL and realistic variable amplitude loads (VAL, representative of real in- flight conditions, have been applied to “dog bone” shaped tensile specimens. It has been shown that the measurement of the surface irregularity parameters can be applied to evaluate the damage state of a structure, and that it is independent of the type of fatigue load that has caused the damage. As a result, this measurement technique is applicable for a wide range of inspections of composite material structures, from pressurized tanks with constant amplitude loads, to variable amplitude loaded aeronautical structures such as wings and empennages, up to automotive and other industrial applications.

Surface Irregularity Factor as a Parameter to Evaluate the Fatigue Damage State of CFRP

Science.gov (United States)

Zuluaga-Ramírez, Pablo; Frövel, Malte; Belenguer, Tomás; Salazar, Félix

2015-01-01

This work presents an optical non-contact technique to evaluate the fatigue damage state of CFRP structures measuring the irregularity factor of the surface. This factor includes information about surface topology and can be measured easily on field, by techniques such as optical perfilometers. The surface irregularity factor has been correlated with stiffness degradation, which is a well-accepted parameter for the evaluation of the fatigue damage state of composite materials. Constant amplitude fatigue loads (CAL) and realistic variable amplitude loads (VAL), representative of real in- flight conditions, have been applied to “dog bone” shaped tensile specimens. It has been shown that the measurement of the surface irregularity parameters can be applied to evaluate the damage state of a structure, and that it is independent of the type of fatigue load that has caused the damage. As a result, this measurement technique is applicable for a wide range of inspections of composite material structures, from pressurized tanks with constant amplitude loads, to variable amplitude loaded aeronautical structures such as wings and empennages, up to automotive and other industrial applications. PMID:28793655

Processes of Internal and International Migration from Chitwan, Nepal.

Science.gov (United States)

Bohra, Pratikshya; Massey, Douglas S

2009-01-01

In this study we examine which factors predict internal and international migration from Chitwan, a flat valley located in the South-Central region of Nepal, seeking to measure the effect of theoretically specified variables such as human capital, social capital, physical capital, and neighborhood socioeconomic conditions while controlling for demographic variables. We use data from the Chitwan Valley Family Study (CVFS) to estimate a series of discrete time event history models of first and repeat migration to three competing destinations: other locations within Chitwan, other districts within Nepal, and places outside of Nepal. Results support hypotheses derived from neoclassical economics, the theory of new economics of migration, social capital theory, and cumulative causation theory. Our results underscore the need for a synthetic theoretical model that incorporates factors operating at the individual, household, and community levels. The use of multiple explanatory models yields a clearer picture of the forces driving internal and international migration from rural districts in developing nations such as Nepal.

Uni- and multi-variable modelling of flood losses: experiences gained from the Secchia river inundation event.

Science.gov (United States)

Carisi, Francesca; Domeneghetti, Alessio; Kreibich, Heidi; Schröter, Kai; Castellarin, Attilio

2017-04-01

Flood risk is function of flood hazard and vulnerability, therefore its accurate assessment depends on a reliable quantification of both factors. The scientific literature proposes a number of objective and reliable methods for assessing flood hazard, yet it highlights a limited understanding of the fundamental damage processes. Loss modelling is associated with large uncertainty which is, among other factors, due to a lack of standard procedures; for instance, flood losses are often estimated based on damage models derived in completely different contexts (i.e. different countries or geographical regions) without checking its applicability, or by considering only one explanatory variable (i.e. typically water depth). We consider the Secchia river flood event of January 2014, when a sudden levee-breach caused the inundation of nearly 200 km2 in Northern Italy. In the aftermath of this event, local authorities collected flood loss data, together with additional information on affected private households and industrial activities (e.g. buildings surface and economic value, number of company's employees and others). Based on these data we implemented and compared a quadratic-regression damage function, with water depth as the only explanatory variable, and a multi-variable model that combines multiple regression trees and considers several explanatory variables (i.e. bagging decision trees). Our results show the importance of data collection revealing that (1) a simple quadratic regression damage function based on empirical data from the study area can be significantly more accurate than literature damage-models derived for a different context and (2) multi-variable modelling may outperform the uni-variable approach, yet it is more difficult to develop and apply due to a much higher demand of detailed data.

Implicit and Explicit Self-Esteem Discrepancies, Victimization and the Development of Late Childhood Internalizing Problems.

Science.gov (United States)

Leeuwis, Franca H; Koot, Hans M; Creemers, Daan H M; van Lier, Pol A C

2015-07-01

Discrepancies between implicit and explicit self-esteem have been linked with internalizing problems among mainly adolescents and adults. Longitudinal research on this association in children is lacking. This study examined the longitudinal link between self-esteem discrepancies and the development of internalizing problems in children. It furthermore examined the possible mediating role of self-esteem discrepancies in the longitudinal link between experiences of peer victimization and internalizing problems development. Children (N = 330, M(age) = 11.2 year; 52.5 % female) were followed over grades five (age 11 years) and six (age 12 years). Self-report measures were used annually to test for victimization and internalizing problems. Implicit self-esteem was assessed using an implicit association test, while explicit self-esteem was assessed via self-reports. Self-esteem discrepancies represented the difference between implicit and explicit self-esteem. Results showed that victimization was associated with increases in damaged self-esteem (higher levels of implicit than explicit self-esteem. Additionally, damaged self-esteem at age 11 years predicted an increase in internalizing problems in children over ages 11 to 12 years. Furthermore, damaged self-esteem mediated the relationship between age 11 years victimization and the development of internalizing problems. No impact of fragile self-esteem (lower levels of implicit than explicit self-esteem) on internalizing problems was found. The results thus underscore that, as found in adolescent and adult samples, damaged self-esteem is a predictor of increases in childhood internalizing problems. Moreover, damaged self-esteem might explain why children who are victimized develop internalizing problems. Implications are discussed.

Diagnostic budget study of the internal variability in ensemble simulations of the Canadian RCM

Energy Technology Data Exchange (ETDEWEB)

Nikiema, Oumarou; Laprise, Rene [UQAM, Canadian Network for Regional Climate Modelling and Diagnostics, Centre ESCER, Departement des Sciences de la Terre et de l' Atmosphere, B.P. 8888, Montreal, QC (Canada)

2011-06-15

Due to the chaotic and nonlinear nature of the atmospheric dynamics, it is known that small differences in the initial conditions (IC) of models can grow and affect the simulation evolution. In this study, we perform a quantitative diagnostic budget calculation of the various diabatic and dynamical contributions to the time evolution and spatial distribution of internal variability (IV) in simulations with the nested Canadian Regional Climate Model. We establish prognostic budget equations of the IV for the potential temperature and the relative vorticity fields. For both of these variables, the IV equations present similar terms, notably terms relating to the transport of IV by ensemble-mean flow and to the covariance of fluctuations acting on the gradient of the ensemble-mean state. We show the skill of these equations to diagnose the IV that took place in an ensemble of 20 3-month (summer season) simulations that differed only in their IC. Our study suggests that the dominant terms responsible for the large increase of IV are either the covariance term involving the potential temperature fluctuations and diabatic heating fluctuations, or the covariance of inter-member fluctuations acting upon ensemble-mean gradients. Our results also show that, on average, the third-order terms are negligible, but they can become important when the IV is large. (orig.)

First International Workshop on Variability in Software Architecture (VARSA 2011)

NARCIS (Netherlands)

Galster, Matthias; Avgeriou, Paris; Weyns, Danny; Mannisto, Tomi

2011-01-01

Variability is the ability of a software artifact to be changed for a specific context. Mechanisms to accommodate variability include software product lines, configuration wizards and tools in commercial software, configuration interfaces of software components, or the dynamic runtime composition of

International Law governing the Safe and Peaceful Uses of Nuclear Energy

International Nuclear Information System (INIS)

Jankowitsch-Prevor, O.

2002-01-01

1. The International Governmental Institutions. History and mandates: IAEA, OECD/NEA, EURATOM. 2. International Treaties and Conventions: The Peaceful Uses of Nuclear Energy: Commitment and Verification (the NPT, Safeguards Agreements with the IAEA, The Additional protocol, Regional Non-proliferation Treaties); the Physical protection of Nuclear Material (Convention on the Physical Protection of Nuclear Material); Civil Liability for Nuclear Damage (Vienna Convention on the Civil Liability for Nuclear Damage, Protocol to Amend the Vienna Convention, Paris Convention on Civil Liability, Joint Protocol relating to the Application of the Vienna Convention and the Paris Convention, Convention on Supplementary compensation for Nuclear Damage); In case of Nuclear Accident: Notification and Assistance (Convention on Early Notification of a Nuclear Accident, Convention on Assistance in the case of a Nuclear Accident or Radiological Emergency); International Law Governing Nuclear Safety (Nuclear Safety Convention, Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management). 3. Relationship between International and National Law

Variability of the internal tide on the southern Monterey Bay continental shelf and associated bottom boundary layer sediment transport

Science.gov (United States)

Rosenberger, Kurt; Storlazzi, Curt; Cheriton, Olivia

2016-01-01

A 6-month deployment of instrumentation from April to October 2012 in 90 m water depth near the outer edge of the mid-shelf mud belt in southern Monterey Bay, California, reveals the importance regional upwelling on water column density structure, potentially accounting for the majority of the variability in internal tidal energy flux across the shelf. Observations consisted of time-series measurements of water-column currents, temperature and salinity, and near-bed currents and suspended matter. The internal tide accounted for 15–25% of the water-column current variance and the barotropic tide accounted for up to 35%. The subtidal flow showed remarkably little shear and was dominated by the 7–14 day band, which is associated with relaxations in the dominant equatorward winds typical of coastal California in the spring and summer. Upwelling and relaxation events resulted in strong near-bed flows and accounted for almost half of the current stress on the seafloor (not accounting for wave orbital velocities), and may have driven along-shelf geostrophic flow during steady state conditions. Several elevated suspended particulate matter (SPM) events occurred within 3 m of the bed and were generally associated with higher, long-period surface waves. However, these peaks in SPM did not coincide with the predicted resuspension events from the modeled combined wave–current shear stress, indicating that the observed SPM at our site was most likely resuspended elsewhere and advected along-isobath. Sediment flux was almost equal in magnitude in the alongshore and cross-shore directions. Instances of wave–current shear stress that exceeded the threshold of resuspension for the silty-clays common at these water depths only occurred when near-bed orbital velocities due to long-period surface waves coincided with vigorous near-bed currents associated with the internal tide or upwelling/relaxation events. Thus upwelling/relaxation dynamics are primarily responsible for

Thermoviscoelastoplastic Deformation of Compound Shells of Revolution Made of a Damageable Material

Science.gov (United States)

Shevchenko, Yu. N.; Galishin, A. Z.; Babeshko, M. E.

2015-11-01

A technique for numerical analysis of the thermoviscoelastoplastic deformation of thin compound shells made of a damageable material in which a fracture front propagates is described. A procedure for automatic variation in the step of integration of the kinetic damage equation is developed. A two-layer cylindrical shell cooling by convection and subjected to internal pressure and tensile force is analyzed as an example. The numerical data are presented and analyzed

Global radiation damage at 300 and 260 K with dose rates approaching 1 MGy s{sup −1}

Energy Technology Data Exchange (ETDEWEB)

Warkentin, Matthew; Badeau, Ryan; Hopkins, Jesse B. [Cornell University, Ithaca, NY 14853 (United States); Mulichak, Anne M.; Keefe, Lisa J. [Argonne National Laboratory, Argonne, IL 60439 (United States); Thorne, Robert E., E-mail: ret6@cornell.edu [Cornell University, Ithaca, NY 14853 (United States)

2012-02-01

Approximately half of global radiation damage to thaumatin crystals can be outrun at 260 K if data are collected in less than 1 s. Global radiation damage to 19 thaumatin crystals has been measured using dose rates from 3 to 680 kGy s{sup −1}. At room temperature damage per unit dose appears to be roughly independent of dose rate, suggesting that the timescales for important damage processes are less than ∼1 s. However, at T = 260 K approximately half of the global damage manifested at dose rates of ∼10 kGy s{sup −1} can be outrun by collecting data at 680 kGy s{sup −1}. Appreciable sample-to-sample variability in global radiation sensitivity at fixed dose rate is observed. This variability cannot be accounted for by errors in dose calculation, crystal slippage or the size of the data sets in the assay.

Structurally integrated fiber optic damage assessment system for composite materials.

Science.gov (United States)

Measures, R M; Glossop, N D; Lymer, J; Leblanc, M; West, J; Dubois, S; Tsaw, W; Tennyson, R C

1989-07-01

Progress toward the development of a fiber optic damage assessment system for composite materials is reported. This system, based on the fracture of embedded optical fibers, has been characterized with respect to the orientation and location of the optical fibers in the composite. Together with a special treatment, these parameters have been tailored to yield a system capable of detecting the threshold of damage for various impacted Kevlar/epoxy panels. The technique has been extended to measure the growth of a damage region which could arise from either impact, manufacturing flaws, or static overloading. The mechanism of optical fiber fracture has also been investigated. In addition, the influence of embedded optical fibers on the tensile and compressive strength of the composite material has been studied. Image enhanced backlighting has been shown to be a powerful and convenient method of assessing internal damage to translucent composite materials.

The mechanism behind internally generated centennial-to-millennial scale climate variability in an earth system model of intermediate complexity

Directory of Open Access Journals (Sweden)

T. Friedrich

2010-08-01

Full Text Available The mechanism triggering centennial-to-millennial-scale variability of the Atlantic Meridional Overturning Circulation (AMOC in the earth system model of intermediate complexity LOVECLIM is investigated. It is found that for several climate boundary conditions such as low obliquity values (~22.1° or LGM-albedo, internally generated centennial-to-millennial-scale variability occurs in the North Atlantic region. Stochastic excitations of the density-driven overturning circulation in the Nordic Seas can create regional sea-ice anomalies and a subsequent reorganization of the atmospheric circulation. The resulting remote atmospheric anomalies over the Hudson Bay can release freshwater pulses into the Labrador Sea and significantly increase snow fall in this region leading to a subsequent reduction of convective activity. The millennial-scale AMOC oscillations disappear if LGM bathymetry (with closed Hudson Bay is prescribed or if freshwater pulses are suppressed artificially. Furthermore, our study documents the process of the AMOC recovery as well as the global marine and terrestrial carbon cycle response to centennial-to-millennial-scale AMOC variability.

Compensation for nuclear damage in the OECD member countries

International Nuclear Information System (INIS)

1977-01-01

The study aims to describe briefly the main features of the system for compensation of nuclear damage in OECD Member Countries, emphasising the practical arrangements for compensating such damage, with illustrations drawn from various national legal provisions applicable to such cases. The study indicates and compares legislative provisions which are specifically nuclear, without going into the substantive and procedural rules of the general law, reference to which frequently occurs in enactments relating to nuclear third party liability. The references to national nuclear legislation illustrate the manner in which effect has been given to international Conventions. (Auth.) [fr

Damage analysis: damage function development and application

International Nuclear Information System (INIS)

Simons, R.L.; Odette, G.R.

1975-01-01

The derivation and application of damage functions, including recent developments for the U.S. LMFBR and CTR programs, is reviewed. A primary application of damage functions is in predicting component life expectancies; i.e., the fluence required in a service spectrum to attain a specified design property change. An important part of the analysis is the estimation of the uncertainty in such fluence limit predictions. The status of standardizing the procedures for the derivation and application of damage functions is discussed. Improvements in several areas of damage function development are needed before standardization can be completed. These include increasing the quantity and quality of the data used in the analysis, determining the limitations of the analysis due to the presence of multiple damage mechanisms, and finally, testing of damage function predictions against data obtained from material surveillance programs in operating thermal and fast reactors. 23 references. (auth)

Replication stress, DNA damage signalling, and cytomegalovirus infection in human medulloblastomas

DEFF Research Database (Denmark)

Bartek, Jiri; Fornara, Olesja; Merchut-Maya, Joanna Maria

2017-01-01

suppressor activation, across our medulloblastoma cohort. Most tumours showed high proliferation (Ki67 marker), variable oxidative DNA damage (8-oxoguanine lesions) and formation of 53BP1 nuclear 'bodies', the latter indicating (along with ATR-Chk1 signalling) endogenous replication stress. The bulk...... cell replication stress and DNA repair. Collectively, the scenario we report here likely fuels genomic instability and evolution of medulloblastoma resistance to standard-of-care genotoxic treatments....... eight established immunohistochemical markers to assess the status of the DDR machinery, we found pronounced endogenous DNA damage signalling (γH2AX marker) and robust constitutive activation of both the ATM-Chk2 and ATR-Chk1 DNA damage checkpoint kinase cascades, yet unexpectedly modest p53 tumour...

Medulla oblongata damage and cardiac autonomic dysfunction in Parkinson disease.

Science.gov (United States)

Pyatigorskaya, Nadya; Mongin, Marie; Valabregue, Romain; Yahia-Cherif, Lydia; Ewenczyk, Claire; Poupon, Cyril; Debellemaniere, Eden; Vidailhet, Marie; Arnulf, Isabelle; Lehéricy, Stephane

2016-12-13

To characterize medulla oblongata damage using diffusion tensor imaging (DTI) in Parkinson disease (PD) and correlate it with dysfunction of the cardiac sympathetic/vagal balance. Fifty-two patients with PD and 24 healthy controls were included in the study. All participants underwent clinical examination and 3T MRI using 3D T1-weighted imaging and DTI. DTI metrics were calculated within manually drawn regions of interest. Heart rate variability was evaluated using spectral analysis of the R-R cardiac interval during REM and slow-wave sleep based on continuous overnight electrocardiographic monitoring. Respiratory frequency was measured in 30-second contiguous epochs of REM and slow-wave sleep. The relationships between imaging and cardiac variables were calculated using partial correlations followed by the multiple comparisons permutation approach. The changes in heart rate and respiratory frequency variability from slow-wave sleep to REM sleep in healthy controls were no longer detectable in patients with PD. There were significant increases in the mean (p = 0.006), axial (p = 0.006), and radial diffusivities (p = 0.005) in the medulla oblongata of patients with PD. In PD, diffusion changes were specifically correlated with a lower heart rate and respiratory frequency variability during REM sleep. This study provides evidence that medulla oblongata damage underlies cardiac sympathetic/vagal balance and respiratory dysfunction in patients with PD. © 2016 American Academy of Neurology.

Performance and Internal Control

OpenAIRE

Mifti, Sri; Lestariyo, Nugroho Budi; Kowanda, Anacostia

2009-01-01

The objective of this study is to measure the influence of internal auditing on performance. Research object is Inspectorate General Department of Home Affairs staffs. As research instrument, questionnaire was developed and distributed to respondents. Closed type questionnaire was developed with five (5) choices to measure the two (2) research variables. Internal auditing is measured using six (6) dimensions, and performance is measured using three (3) dimensions. As the two variables are lat...

Hurricane Harvey: Infrastructure Damage Assessment of Texas' Central Gulf Coast Region

Science.gov (United States)

Mooney, W. D.; Fovenyessy, S.; Patterson, S. F.

2017-12-01

We report a detailed ground-based damage survey for Hurricane Harvey, the first major hurricane to make landfall along the central Texas coast since the 1970 Category 3 Hurricane Celia. Harvey, a Category 4 storm, made landfall near Rockport, Texas on August 25th, 2017 at 10 PM local time. From September 2nd to 5th we visited Rockport and 22 nearby cities to assess the severity of the damage. Nearly all damage observed occurred as a direct result of the hurricane-force winds, rather than a storm surge. This observation is in contrast to the severe damage caused by both high winds and a significant storm surge, locally 3 to 5 m in height, in the 2013 Category 5 Hurricane Haiyan, that devastated the Philippines. We have adopted a damage scale and have given an average damage score for each of the areas investigated. Our damage contour map illustrates the areal variation in damage. The damage observed was widespread with a high degree of variability. Different types of damage included: (1) fallen fences and utility poles; (2) trees with branches broken or completely snapped in half; (3) business signs that were either partially or fully destroyed; (4) partially sunken or otherwise damaged boats; (5) and sheet metal sheds either completely or partially destroyed. There was also varying degrees of damage to both residential and commercial structures. Many homes had (6) roof damage, ranging from minor damage to complete destruction of the roof and second story, and (7) siding damage, where parts or whole sections of the homes siding had been removed. The area that had the lowest average damage score was Corpus Christi, and the areas that had the highest average damage score was both Fulton and Holiday Beach. There is no simple, uniform pattern of damage distribution. Rather, the damage was scattered, revealing hot spots of areas that received more damage than the surrounding area. However, when compared to the NOAA wind swath map, all of the damage was contained within

The game damages on agricultural crops in Croatia

Directory of Open Access Journals (Sweden)

Hrvoje Novosel

2012-12-01

Full Text Available Conflicts between wildlife and humans have been reported from all over the world, but in Croatia the extent and intensity of the conflict is increasing. Agricultural damage by game is a major concern for both agricultural and wildlife agencies at the national level. In this study 4,695 cases of game damage over a 4-year period were analysed. Results indicated that the total amount of economic impact on agriculture from game damage was significant. The distribution of payments shows that a majority of payments have lower economic value with an average amount of single payment being 477.08 €. The annual number of payments was found to have a negative correlation coefficient (-0.469 to the total payment amount for damages. According to the number of payments (68% of the number of payments and the payment amount (60% of total payment amount, the crop most often damaged was maize. Analysis of the data found that there was a negative growth trend of payment frequency and total payment amount for grape vineyards. The correlation between yearly number of payments and yearly production was not calculated for any crop. The high seasonal nature of payments was a determent of seasonal regression using a dummy variable regression (r2=0.93. A comparison of the monthly number of payments and monthly amounts is depicted by a time series using a seasonal line. The impact of wild boar damage on agriculture crops, in total, leads to the conclusion that this game species is a major problem. The results showed a specific subset of game damage in Croatia and, as such, it can be extrapolated to provide insight into the damage caused by wild boar in other countries.

Multi-physics modeling of multifunctional composite materials for damage detection

Science.gov (United States)

Sujidkul, Thanyawalai

This study presents a modeling of multifunction composite materials for damage detection with its verification and validation to mechanical behavior predictions of Carbon Fibre Reinforced Polymer composites (CFRPs), CFRPs laminated composites, and woven SiC/SiC matrix composites that are subjected to fracture damage. Advantages of those materials are low cost, low density, high strength-to-weight ratio, and comparable specific tensile properties, the special of SiC/SiC is good environmental stability at high temperature. Resulting in, the composite has been used for many important structures such as helicopter rotors, aerojet engines, gas turbines, hot control surfaces, sporting goods, and windmill blades. Damage or material defect detection in a mechanical component can provide vital information for the prediction of remaining useful life, which will result in the prevention of catastrophic failures. Thus the understanding of the mechanical behavior have been challenge to the prevent damage and failure of composites in different scales. The damage detection methods in composites have been investigated widely in recent years. Non-destructive techniques are the traditional methods to detect the damage such as X-ray, acoustic emission and thermography. However, due to the invisible damage in composite can be occurred, to prevent the failure in composites. The developments of damage detection methods have been considered. Due to carbon fibers are conductive materials, in resulting CFRPs can be self-sensing to detect damage. As is well known, the electrical resistance has been shown to be a sensitive measure of internal damage, and also this work study in thermal resistance can detect damage in composites. However, there is a few number of different micromechanical modeling schemes has been proposed in the published literature for various types of composites. This works will provide with a numerical, analytical, and theoretical failure models in different damages to

Compensation for nuclear damage: a comparison among the international regime, Japan and China

NARCIS (Netherlands)

Liu, J.; Faure, Michael

2016-01-01

Following the Fukushima disaster in Japan in 2011, how the compensation system for nuclear damage should be improved has obtained broad attention. The compensation system, including liability rules, insurance and government involvement, does not only concern to what extent the victims can be

Prognostic importance of glycaemic variability on hospital mortality in patients hospitalised in Internal Medicine Departments.

Science.gov (United States)

Sáenz-Abad, D; Gimeno-Orna, J A; Pérez-Calvo, J I

2015-12-01

The objective was to assess the prognostic importance of various glycaemic control measures on hospital mortality. Retrospective, analytical cohort study that included patients hospitalised in internal medicine departments with a diagnosis related to diabetes mellitus (DM), excluding acute decompensations. The clinical endpoint was hospital mortality. We recorded clinical, analytical and glycaemic control-related variables (scheduled insulin administration, plasma glycaemia at admission, HbA1c, mean glycaemia (MG) and in-hospital glycaemic variability and hypoglycaemia). The measurement of hospital mortality predictors was performed using univariate and multivariate logistic regression. A total of 384 patients (50.3% men) were included. The mean age was 78.5 (SD, 10.3) years. The DM-related diagnoses were type 2 diabetes (83.6%) and stress hyperglycaemia (6.8%). Thirty-one (8.1%) patients died while in hospital. In the multivariate analysis, the best model for predicting mortality (R(2)=0.326; P<.0001) consisted, in order of importance, of age (χ(2)=8.19; OR=1.094; 95% CI 1.020-1.174; P=.004), Charlson index (χ(2)=7.28; OR=1.48; 95% CI 1.11-1.99; P=.007), initial glycaemia (χ(2)=6.05; OR=1.007; 95% CI 1.001-1.014; P=.014), HbA1c (χ(2)=5.76; OR=0.59; 95% CI 0.33-1; P=.016), glycaemic variability (χ(2)=4.41; OR=1.031; 95% CI 1-1.062; P=.036), need for corticosteroid treatment (χ(2)=4.03; OR=3.1; 95% CI 1-9.64; P=.045), administration of scheduled insulin (χ(2)=3.98; OR=0.26; 95% CI 0.066-1; P=.046) and systolic blood pressure (χ(2)=2.92; OR=0.985; 95% CI 0.97-1.003; P=.088). An increase in initial glycaemia and in-hospital glycaemic variability predict the risk of mortality for hospitalised patients with DM. Copyright © 2015 Elsevier España, S.L.U. y Sociedad Española de Medicina Interna (SEMI). All rights reserved.

Structural Analysis of Grounding Damages on MS DEXTRA

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Simonsen, Bo Cerup; Zhang, Shengming

Sub-task 1.2 of DEXTREMEL deals with development of models for external ship collision and grounding dynamics and for internal ship structure dynamics. In order to get a better overview of the work performed in this task it has been decided to write two reports on the work. One dealing...... with internal and external collision dynamics and the present report which deals with structural analysis of grounding events.The first part of the present report is devoted to an energy balance for raking damage situations.Then follows a numerical study of the forces associated with cutting and crushing...

Prediction Of Formability In Sheet Metal Forming Processes Using A Local Damage Model

International Nuclear Information System (INIS)

Teixeira, P.; Santos, Abel; Cesar Sa, J.; Andrade Pires, F.; Barata da Rocha, A.

2007-01-01

The formability in sheet metal forming processes is mainly conditioned by ductile fracture resulting from geometric instabilities due to necking and strain localization. The macroscopic collapse associated with ductile failure is a result of internal degradation described throughout metallographic observations by the nucleation, growth and coalescence of voids and micro-cracks. Damage influences and is influenced by plastic deformation and therefore these two dissipative phenomena should be coupled at the constitutive level. In this contribution, Lemaitre's ductile damage model is coupled with Hill's orthotropic plasticity criterion. The coupling between damaging and material behavior is accounted for within the framework of Continuum Damage Mechanics (CDM). The resulting constitutive equations are implemented in the Abaqus/Explicit code, for the prediction of fracture onset in sheet metal forming processes. The damage evolution law takes into account the important effect of micro-crack closure, which dramatically decreases the rate of damage growth under compressive paths

[Prevention and control of air pollution needs to strengthen further study on health damage caused by air pollution].

Science.gov (United States)

Wu, T C

2016-08-06

Heath issues caused by air pollution such as particulate matter (PM) are much concerned and focused among air, water and soil pollutions because human breathe air for whole life span. Present comments will review physical and chemical characteristics of PM2.5 and PM10; Dose-response associations of PM10, PM2.5 and their components with mortality and risk of cardiopulmonary diseases, early health damages such as the decrease of lung functions and heart rate variability, DNA damage; And the roles of genetic variations and epigenetic changes in lung functions and heart rate variability, DNA damage related to PMs and their components. This comments list some limitations and perspectives about the associations of air pollution with health.

Aging of hematopoietic stem cells: DNA damage and mutations?

Science.gov (United States)

Moehrle, Bettina M; Geiger, Hartmut

2016-10-01

Aging in the hematopoietic system and the stem cell niche contributes to aging-associated phenotypes of hematopoietic stem cells (HSCs), including leukemia and aging-associated immune remodeling. Among others, the DNA damage theory of aging of HSCs is well established, based on the detection of a significantly larger amount of γH2AX foci and a higher tail moment in the comet assay, both initially thought to be associated with DNA damage in aged HSCs compared with young cells, and bone marrow failure in animals devoid of DNA repair factors. Novel data on the increase in and nature of DNA mutations in the hematopoietic system with age, the quality of the DNA damage response in aged HSCs, and the nature of γH2AX foci question a direct link between DNA damage and the DNA damage response and aging of HSCs, and rather favor changes in epigenetics, splicing-factors or three-dimensional architecture of the cell as major cell intrinsic factors of HSCs aging. Aging of HSCs is also driven by a strong contribution of aging of the niche. This review discusses the DNA damage theory of HSC aging in the light of these novel mechanisms of aging of HSCs. Copyright © 2016 ISEH - International Society for Experimental Hematology. Published by Elsevier Inc. All rights reserved.

Are Simulated and Observed Twentieth Century Tropical Pacific Sea Surface Temperature Trends Significant Relative to Internal Variability?

Science.gov (United States)

Coats, S.; Karnauskas, K. B.

2017-10-01

Historical trends in the tropical Pacific zonal sea surface temperature gradient (SST gradient) are analyzed herein using 41 climate models (83 simulations) and 5 observational data sets. A linear inverse model is trained on each simulation and observational data set to assess if trends in the SST gradient are significant relative to the stationary statistics of internal variability, as would suggest an important role for external forcings such as anthropogenic greenhouse gasses. None of the 83 simulations have a positive trend in the SST gradient, a strengthening of the climatological SST gradient with more warming in the western than eastern tropical Pacific, as large as the mean trend across the five observational data sets. If the observed trends are anthropogenically forced, this discrepancy suggests that state-of-the-art climate models are not capturing the observed response of the tropical Pacific to anthropogenic forcing, with serious implications for confidence in future climate projections. There are caveats to this interpretation, however, as some climate models have a significant strengthening of the SST gradient between 1900 and 2013 Common Era, though smaller in magnitude than the observational data sets, and the strengthening in three out of five observational data sets is insignificant. When combined with observational uncertainties and the possibility of centennial time scale internal variability not sampled by the linear inverse model, this suggests that confident validation of anthropogenic SST gradient trends in climate models will require further emergence of anthropogenic trends. Regardless, the differences in SST gradient trends between climate models and observational data sets are concerning and motivate the need for process-level validation of the atmosphere-ocean dynamics relevant to climate change in the tropical Pacific.

International standard problem ISP36. Cora-W2 experiment on severe fuel damage for a Russian type PWR

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

An OECD/NEA-CSNI International Standard Problem (ISP) has been performed on the experimental comparison basis of the severe fuel damage experiment CORA-W2. The out-of-pile experiment CORA-W2 was executed in February 1993 at he Forschungszentrum Karlsruhe. The objective of this experiment was the investigation of the behavior of a Russian type PWR fuel element (VVER-1000) during early core degradation. The main difference between a Western type and a Russian type PWR bundle is the B{sub 4}C absorber rod instead of AgInCd. Measured quantities ar boundary conditions, bundle temperature, hydrogen generation and the final bundle configurations after cooldown. The ISP was conducted as a blind exercise. Boundary conditions were estimated using ATHLET-CD. Six different severe accident codes were used. The comparisons between experimental and analytical results were grouped by codes and examined separately. The thermal behavior up to significant oxidation has been predicted quite well. Larger deviations have been observed for the oxidation-induced temperature escalation, both time of onset and maximum temperature as well. The bundle behavior is greatly influenced by chemical interactions involving B{sub 4}C absorber rod material, which failed relatively early at low temperature due to eutectic interaction between B{sub 4}C and SS cladding as well as the SS guide tube. Regarding the complex material interaction larger differences can be recognized between calculated and measured results because of inappropriate models for material relocation and solidification processes and the lack of models describing the interactions of absorber rod materials with the fuel rods. For the total amount of H{sub 2} generated, acceptable agreement could be achieved, if the total of oxidized zirconium was calculated correctly. The oxidation of stainless steel components and B{sub 4}C were not treated. In general the confidence in code predictions decreases with processing core damage. 36 refs.

International standard problem ISP36. Cora-W2 experiment on severe fuel damage for a Russian type PWR

International Nuclear Information System (INIS)

1996-01-01

An OECD/NEA-CSNI International Standard Problem (ISP) has been performed on the experimental comparison basis of the severe fuel damage experiment CORA-W2. The out-of-pile experiment CORA-W2 was executed in February 1993 at he Forschungszentrum Karlsruhe. The objective of this experiment was the investigation of the behavior of a Russian type PWR fuel element (VVER-1000) during early core degradation. The main difference between a Western type and a Russian type PWR bundle is the B 4 C absorber rod instead of AgInCd. Measured quantities ar boundary conditions, bundle temperature, hydrogen generation and the final bundle configurations after cooldown. The ISP was conducted as a blind exercise. Boundary conditions were estimated using ATHLET-CD. Six different severe accident codes were used. The comparisons between experimental and analytical results were grouped by codes and examined separately. The thermal behavior up to significant oxidation has been predicted quite well. Larger deviations have been observed for the oxidation-induced temperature escalation, both time of onset and maximum temperature as well. The bundle behavior is greatly influenced by chemical interactions involving B 4 C absorber rod material, which failed relatively early at low temperature due to eutectic interaction between B 4 C and SS cladding as well as the SS guide tube. Regarding the complex material interaction larger differences can be recognized between calculated and measured results because of inappropriate models for material relocation and solidification processes and the lack of models describing the interactions of absorber rod materials with the fuel rods. For the total amount of H 2 generated, acceptable agreement could be achieved, if the total of oxidized zirconium was calculated correctly. The oxidation of stainless steel components and B 4 C were not treated. In general the confidence in code predictions decreases with processing core damage. (N.T.)

Seasonal variability of oxidative stress markers in city bus drivers. Part I. Oxidative damage to DNA.

Science.gov (United States)

Rossner, Pavel; Svecova, Vlasta; Milcova, Alena; Lnenickova, Zdena; Solansky, Ivo; Sram, Radim J

2008-07-03

We investigated the seasonal variability of 8-oxodeoxyguanosine (8-oxodG), a marker of oxidative damage to DNA, in urine of 50 bus drivers and 50 controls in Prague, Czech Republic, in three seasons with different levels of air pollution: winter 2005, summer 2006 and winter 2006. The exposure to environmental pollutants (carcinogenic polycyclic aromatic hydrocarbons, c-PAHs, particulate matter (PM), and volatile organic compounds (VOC)) was monitored by personal and/or stationary monitors. For the analysis of 8-oxodG levels, the ELISA technique was used. Bus drivers were exposed to significantly higher levels of c-PAHs in winter 2006, while in the other two seasons the exposure of controls was unexpectedly higher than that of bus drivers. We did not see any difference in VOC exposure between both groups in summer 2006 and in winter 2006; VOC were not monitored in winter 2005. 8-OxodG levels were higher in bus drivers than in controls in all seasons. The median levels of 8-oxodG (nmol/mmol creatinine) in bus drivers vs. controls were as follows: winter 2005: 7.79 vs. 6.12 (p=0.01); summer 2006: 6.91 vs. 5.11 (p<0.01); winter 2006: 5.73 vs. 3.94 (p<0.001). Multivariate logistic regression analysis identified PM2.5 and PM10 levels, measured by stationary monitors during a 3-day period before urine collection, as the only factors significantly affecting 8-oxodG levels, while the levels of c-PAHs had no significant influence.

Estimated airborne release of plutonium from Atomics International's Nuclear Materials Development Facility in the Santa Susana site, California, as a result of postulated damage from severe wind and earthquake hazard

International Nuclear Information System (INIS)

Mishima, J.; Ayer, J.E.

1981-09-01

The potential mass of airborne releases of plutonium (source term) that could result from wind and seismic damage is estimated for the Atomics International Company's Nuclear Materials Development Facility (NMDF) at the Santa Susana site in California. The postulated source terms will be useful as the basis for estimating the potential dose to the maximum exposed individual by inhalation and to the total population living within a prescribed radius of the site. The respirable fraction of airborne particles is thus the principal concern. The estimated source terms are based on the damage ratio, and the potential airborne releases if all enclosures suffer particular levels of damage. In an attempt to provide a realistic range of potential source terms that include most of the normal processing conditions, a best estimate bounded by upper and lower limits is provided. The range of source terms is calculated by combining a high best estimate and a low damage ratio, based on a fraction of enclosures suffering crush or perforation, with the airborne release from enclosures based upon an upper limit, average, and lower limit inventory of dispersible materials at risk. Two throughput levels are considered. The factors used to evaluate the fractional airborne release of materials and the exchange rates between enclosed and exterior atmospheres are discussed. The postulated damage and source terms are discussed for wind and earthquake hazard scenarios in order of their increasing severity

Rheological-dynamical continuum damage model for concrete under uniaxial compression and its experimental verification

Directory of Open Access Journals (Sweden)

Milašinović Dragan D.

2015-01-01

Full Text Available A new analytical model for the prediction of concrete response under uniaxial compression and its experimental verification is presented in this paper. The proposed approach, referred to as the rheological-dynamical continuum damage model, combines rheological-dynamical analogy and damage mechanics. Within the framework of this approach the key continuum parameters such as the creep coefficient, Poisson’s ratio and damage variable are functionally related. The critical values of the creep coefficient and damage variable under peak stress are used to describe the failure mode of the concrete cylinder. The ultimate strain is determined in the post-peak regime only, using the secant stress-strain relation from damage mechanics. The post-peak branch is used for the energy analysis. Experimental data for five concrete compositions were obtained during the examination presented herein. The principal difference between compressive failure and tensile fracture is that there is a residual stress in the specimens, which is a consequence of uniformly accelerated motion of load during the examination of compressive strength. The critical interpenetration displacements and crushing energy are obtained theoretically based on the concept of global failure analysis. [Projekat Ministarstva nauke Republike Srbije, br. ON 174027: Computational Mechanics in Structural Engineering i br. TR 36017: Utilization of by-products and recycled waste materials in concrete composites for sustainable construction development in Serbia: Investigation and environmental assessment of possible applications

Damage in woven CFRP laminates subjected to low velocity impacts

International Nuclear Information System (INIS)

Ullah, H; Abdel-Wahab, A A; Harland, A R; Silberschmidt, V V

2012-01-01

Carbon fabric-reinforced polymer (CFRP) composites used in sports products can be exposed to different in-service conditions such as large dynamic bending deformations caused by impact loading. Composite materials subjected to such loads demonstrate various damage modes such as matrix cracking, delamination and, ultimately, fabric fracture. Damage evolution in these materials affects both their in-service properties and performance that can deteriorate with time. These processes need adequate means of analysis and investigation, the major approaches being experimental characterisation and non-destructive examination of internal damage in composite laminates. This research deals with a deformation behaviour and damage in woven composite laminates due to low-velocity dynamic out-of-plane bending. Experimental tests are carried out to characterise the behaviour of such laminates under large-deflection dynamic bending in un-notched specimens in Izod tests using a Resil Impactor. A series of low-velocity impact tests is carried out at various levels of impact energy to assess the energy absorbed and force-time response of CFRP laminates. X-ray micro computed tomography (micro-CT) is used to investigate material damage modes in the impacted specimens. X-ray tomographs revealed that through-thickness matrix cracking, inter-ply delamination and intra-ply delamination, such as tow debonding and fabric fracture, were the prominent damage modes.

The reprocessing plant as a problem of international law

International Nuclear Information System (INIS)

Guendling, L.

1987-01-01

The planned construction of the reprocessing plant creates problems with regard to transfrontier environmental protection, due to the potential hazards involved, and these problems institute obligations of the Federal Republic of Germany under contractual law and under customary international law. Particularly under customary international neighbour law the F.R.G. is obliged to prevent and abstain from transfrontier activities entailing environmental effects with considerable damaging potential in the neighbouring states, which also includes the duty of providing for protection against accidents. It is, however, a clear fact that the states decided the peaceful uses of atomic energy to be admissible, and accept the risk of possible catastrophic damage. The interpretation of existing international laws has to take this fact into account. (orig./HSCH) [de

Predicting hurricane wind damage by claim payout based on Hurricane Ike in Texas

Directory of Open Access Journals (Sweden)

Ji-Myong Kim

2016-09-01

Full Text Available The increasing occurrence of natural disasters and their related damage have led to a growing demand for models that predict financial loss. Although considerable research on the financial losses related to natural disasters has found significant predictors, there has been a lack of comprehensive study that addresses the relationship among vulnerabilities, natural disasters, and the economic losses of individual buildings. This study identifies the vulnerability indicators for hurricanes to establish a metric to predict the related financial loss. We classify hurricane-prone areas by highlighting the spatial distribution of losses and vulnerabilities. This study used a Geographical Information System (GIS to combine and produce spatial data and a multiple regression method to establish a wind damage prediction model. As the dependent variable, we used the value of the Texas Windstorm Insurance Association (TWIA claim payout divided by the appraised values of the buildings to predict real economic loss. As independent variables, we selected a hurricane indicator and built environment vulnerability indicators. The model we developed can be used by government agencies and insurance companies to predict hurricane wind damage.

Vienna Convention and Its Revision and convention on Supplementary Compensation for Nuclear Damage on September 12, 1997

International Nuclear Information System (INIS)

Soljan, V.

1998-01-01

After Chernobyl, the perception of common interest in modernization of the international regime that regulate various aspects of nuclear energy, has been evident among states with nuclear power plants as well as those likely to be involved in or affected by a nuclear incident. The adoption of the protocol Amending the Vienna Convention on Civil liability for Nuclear Damage, 1963 and the Convention on Supplementary Compensation for nuclear damage in September 1997, represents important part of the entire result that has been achieved from the 1986. This article gives a brief survey on the background of the process of modernization of the international regime of liability for nuclear damage and examines solutions contained in the provisions of the conventions. (author)

The inadequate liability and compensation regime for damage caused by nuclear activities

International Nuclear Information System (INIS)

Dyke, Jon M. Van

2010-09-01

The specific obligation to provide restitution and compensation when nuclear activities cause injuries has been recognized repeatedly and is now certainly part of customary international law. But problems remain regarding how to measure damages, how to implement the duty to repair the injuries, and what specific obligations exist to protect neighboring states from transboundary pollution. Although some treaties exist governing liability for harm resulting from nuclear accidents, they are not adequate to protect victims and have not been widely ratified. The failure to require nuclear operators to prepare for damage that may result from accidents constitutes a subsidy to the nuclear industry and makes it difficult to compare the real costs of nuclear energy with the costs of other energy sources. This survey of settled norms and unresolved issues demonstrates that further work is needed to develop a comprehensive and authoritative regime to govern harm from nuclear activities. Although it is clear that both the operators of nuclear facilities and the states that have jurisdiction over them would be responsible to provide restitution and compensation for such harm under a strict liability regime, the types of injuries that must be compensated and the range of damages that must be covered remain subjects of controversy. Although the underlying customary international law principles (the no-harm principle and the polluter-pays principle) are clear, the actual treaties that have been drafted are inadequate and they have not been widely ratified. Victims of damage from nuclear activities would have difficulty finding a neutral tribunal in which to bring their claims and would face procedural obstacles including caps on liabilities and inappropriately short statutes of limitations as well as difficulties regarding proof of damages. The failure to develop a proper regime that would ensure full restitution and compensation for harm resulting from nuclear facilities

Damage detection in high-rise buildings using damage-induced rotations

International Nuclear Information System (INIS)

Sung, Seung Hun; Jung, Ho Youn; Lee, Jung Hoon; Jung, Hyung Jo

2016-01-01

In this paper, a new damage-detection method based on structural vibration is proposed. The essence of the proposed method is the detection of abrupt changes in rotation. Damage-induced rotation (DIR), which is determined from the modal flexibility of the structure, initially occurs only at a specific damaged location. Therefore, damage can be localized by evaluating abrupt changes in rotation. We conducted numerical simulations of two damage scenarios using a 10-story cantilever-type building model. Measurement noise was also considered in the simulation. We compared the sensitivity of the proposed method to localize damage to that of two conventional modal-flexibility-based damage-detection methods, i.e., uniform load surface (ULS) and ULS curvature. The proposed method was able to localize damage in both damage scenarios for cantilever structures, but the conventional methods could not

Damage detection in high-rise buildings using damage-induced rotations

International Nuclear Information System (INIS)

Sung, Seung Hoon; Jung, Ho Youn; Lee, Jung Hoon; Jung, Hyung Jo

2014-01-01

In this paper, a new damage-detection method based on structural vibration is proposed. The essence of the proposed method is the detection of abrupt changes in rotation. Damage-induced rotation (DIR), which is determined from the modal flexibility of the structure, initially occurs only at a specific damaged location. Therefore, damage can be localized by evaluating abrupt changes in rotation. We conducted numerical simulations of two damage scenarios using a 10-story cantilever-type building model. Measurement noise was also considered in the simulation. We compared the sensitivity of the proposed method to localize damage to that of two conventional modal-flexibility-based damage-detection methods, i.e., uniform load surface (ULS) and ULS curvature. The proposed method was able to localize damage in both damage scenarios for cantilever structures, but the conventional methods could not.

Evaluating the economic damages of transport disruptions using a transnational and interregional input-output model for Japan, China, and South Korea

Science.gov (United States)

Irimoto, Hiroshi; Shibusawa, Hiroyuki; Miyata, Yuzuru

2017-10-01

Damage to transportation networks as a result of natural disasters can lead to economic losses due to lost trade along those links in addition to the costs of damage to the infrastructure itself. This study evaluates the economic damages of transport disruptions such as highways, tunnels, bridges, and ports using a transnational and interregional Input-Output Model that divides the world into 23 regions: 9 regions in Japan, 7 regions in China, and 4 regions in Korea, Taiwan, ASEAN5, and the USA to allow us to focus on Japan's regional and international links. In our simulation, economic ripple effects of both international and interregional transport disruptions are measured by changes in the trade coefficients in the input-output model. The simulation showed that, in the case of regional links in Japan, a transport disruption in the Kanmon Straits causes the most damage to our targeted world, resulting in economic damage of approximately 36.3 billion. In the case of international links among Japan, China, and Korea, damage to the link between Kanto in Japan and Huabei in China causes economic losses of approximately 31.1 billion. Our result highlights the importance of disaster prevention in the Kanmon Straits, Kanto, and Huabei to help ensure economic resilience.

An observation of histological evidence on internal organ damages in mice caused by repeated exposures to motorcycle emissions

Science.gov (United States)

Wardoyo, Arinto Y. P.; Juswono, Unggul P.; Noor, Johan A. E.

2017-05-01

Motor vehicle emissions have been identified as a source of ultrafine particles, which have significant impacts on human health. Repeated and prolonged exposure to ultrafine particles may have a significant association with organ damage. Here, we evaluated the correlation between repeated exposure to ultrafine particles and organ damage in mice. Motorcycle emissions were injected into an exposure chamber with mice for a period of 20 seconds. This treatment was conducted over 10 days. The mice were sacrificed on the 2nd, 4th, 6th, 8th, and 10th days for organ preparations. Based on the results, motorcycle emission exposure caused organ damage in mice, with different severities depending on the organ. The highest damage was found for the lung, followed by the kidney, erythrocytes, and liver.

Measurement of damage in systemic vasculitis: a comparison of the Vasculitis Damage Index with the Combined Damage Assessment Index

DEFF Research Database (Denmark)

Suppiah, Ravi; Flossman, Oliver; Mukhtyar, Chetan

2011-01-01

To compare the Vasculitis Damage Index (VDI) with the Combined Damage Assessment Index (CDA) as measures of damage from vasculitis.......To compare the Vasculitis Damage Index (VDI) with the Combined Damage Assessment Index (CDA) as measures of damage from vasculitis....

Population variability in biological adaptive responses to DNA damage and the shapes of carcinogen dose-response curves

International Nuclear Information System (INIS)

Conolly, Rory B.; Gaylor, David W.; Lutz, Werner K.

2005-01-01

Carcinogen dose-response curves for both ionizing radiation and chemicals are typically assumed to be linear at environmentally relevant doses. This assumption is used to ensure protection of the public health in the absence of relevant dose-response data. A theoretical justification for the assumption has been provided by the argument that low dose linearity is expected when an exogenous agent adds to an ongoing endogenous process. Here, we use computational modeling to evaluate (1) how two biological adaptive processes, induction of DNA repair and cell cycle checkpoint control, may affect the shapes of dose-response curves for DNA-damaging carcinogens and (2) how the resulting dose-response behaviors may vary within a population. Each model incorporating an adaptive process was capable of generating not only monotonic dose-responses but also nonmonotonic (J-shaped) and threshold responses. Monte Carlo analysis suggested that all these dose-response behaviors could coexist within a population, as the spectrum of qualitative differences arose from quantitative changes in parameter values. While this analysis is largely theoretical, it suggests that (a) accurate prediction of the qualitative form of the dose-response requires a quantitative understanding of the mechanism (b) significant uncertainty is associated with human health risk prediction in the absence of such quantitative understanding and (c) a stronger experimental and regulatory focus on biological mechanisms and interindividual variability would allow flexibility in regulatory treatment of environmental carcinogens without compromising human health

Damages of industrial equipments in the 1995 Hyougoken-Nanbu Earthquake

International Nuclear Information System (INIS)

Iwatsubo, Takuzo

1997-01-01

Hanshin-Awaji area has a population of approximately 3 million and many industries, including heavy industry, harbor facilities and international trading companies. The 1995 Hyougoken-Nanbu Earthquake occurred just in this area which is 25kmx2km oblong containing Kobe city. About 5,500 people were killed and 250,000 people lost their houses. Japan society of mechanical engineers organized the investigative committee of earthquake disaster of industrial equipments after the earthquake in order to investigate the disaster damages of industrial equipments and to give data for a design manual for mechanical equipments against earthquake excitation. This is an investigation report of the disaster damages of industrial machine equipments. Damages to machine equipment of industries in the high intensity region of the earthquake are illustrated. The mechanisms of the damages and measures against earthquake and safety of nuclear power plant design are discussed. Then it is known that the design of nuclear power plant is different from the general industrial facilities and the damage which was suffered in the general industrial facilities does not occur in the nuclear power plant. (J.P.N.)

Damages of industrial equipments in the 1995 Hyougoken-Nanbu Earthquake

Energy Technology Data Exchange (ETDEWEB)

Iwatsubo, Takuzo [Kobe Univ. (Japan). Faculty of Engineering

1997-03-01

Hanshin-Awaji area has a population of approximately 3 million and many industries, including heavy industry, harbor facilities and international trading companies. The 1995 Hyougoken-Nanbu Earthquake occurred just in this area which is 25kmx2km oblong containing Kobe city. About 5,500 people were killed and 250,000 people lost their houses. Japan society of mechanical engineers organized the investigative committee of earthquake disaster of industrial equipments after the earthquake in order to investigate the disaster damages of industrial equipments and to give data for a design manual for mechanical equipments against earthquake excitation. This is an investigation report of the disaster damages of industrial machine equipments. Damages to machine equipment of industries in the high intensity region of the earthquake are illustrated. The mechanisms of the damages and measures against earthquake and safety of nuclear power plant design are discussed. Then it is known that the design of nuclear power plant is different from the general industrial facilities and the damage which was suffered in the general industrial facilities does not occur in the nuclear power plant. (J.P.N.)

Evaluation of internal noise methods for Hotelling observer models

International Nuclear Information System (INIS)

Zhang Yani; Pham, Binh T.; Eckstein, Miguel P.

2007-01-01

The inclusion of internal noise in model observers is a common method to allow for quantitative comparisons between human and model observer performance in visual detection tasks. In this article, we studied two different strategies for inserting internal noise into Hotelling model observers. In the first strategy, internal noise was added to the output of individual channels: (a) Independent nonuniform channel noise, (b) independent uniform channel noise. In the second strategy, internal noise was added to the decision variable arising from the combination of channel responses. The standard deviation of the zero mean internal noise was either constant or proportional to: (a) the decision variable's standard deviation due to the external noise, (b) the decision variable's variance caused by the external noise, (c) the decision variable magnitude on a trial to trial basis. We tested three model observers: square window Hotelling observer (HO), channelized Hotelling observer (CHO), and Laguerre-Gauss Hotelling observer (LGHO) using a four alternative forced choice (4AFC) signal known exactly but variable task with a simulated signal embedded in real x-ray coronary angiogram backgrounds. The results showed that the internal noise method that led to the best prediction of human performance differed across the studied model observers. The CHO model best predicted human observer performance with the channel internal noise. The HO and LGHO best predicted human observer performance with the decision variable internal noise. The present results might guide researchers with the choice of methods to include internal noise into Hotelling model observers when evaluating and optimizing medical image quality

Analysis of elastic nonlinearity for impact damage detection in composite laminates

International Nuclear Information System (INIS)

Frau, A; Porcu, M C; Aymerich, F; Pieczonka, L; Staszewski, W J

2015-01-01

This paper concerns the experimental analysis of nonlinear response features of a composite laminate plate for impact damage detection. The measurement procedure is based on the Scaling Subtraction Method (SSM) and consists in exciting the damaged specimen with two sinusoidal signals at different amplitude. The linearly rescaled response signal at low amplitude excitation is subtracted from the response at large amplitude excitation to extract the nonlinear signatures. The latter are analysed in the time domain to infer the presence of damage. Results are compared with frequency domain analyses using the nonlinear vibro-acoustic modulation technique (NWMS). Changes in amplitude and phase as well as modulation effects of the acquired responses are also monitored. Surface-bonded, low profile piezoceramic transducers are used for excitation and sensing. Both measurements techniques are applied to detect barely visible impact damage in laminate composite plate. Non-destructive penetrant-enhanced X-ray inspections are carried out to characterize the extent of internal damage. The behavior of the nonlinear features and the sensitivity of each technique are also investigated in the paper. (paper)

Damage development - effects of multiaxial loads on creep pore formation and fatigue damage in typical power plant steels. Final report

International Nuclear Information System (INIS)

Lenk, P.; Proft, D.; Kussmaul, A.; Fischer, R.

2000-01-01

The influence of multiaxial stress on creep pore formation in the steels 14MoV6-3 10CrMo9-10 and X10CrMoVNb9-1 was investigated on the basis of internal pressure experiments on smooth and notched hollow cylinders. In some cases, additional axial forces were applied in order to reproduce component-relevant multiaxial stresses. Local elongation during loading was investigated and analyzed using applied HT-DMS. When different strain levels had been reached, the samples were removed, analyzed, and characterized with regard to different damage parameters. It was found that no interdependence between the surface damage pattern and the deep damage pattern can be derived across the wall thickness if no information on the load state is available. Parallel to the experiments, inelastic FEA were carried out using the ABAQUS program system. The creep law of Graham and Walles was used for calculating flow and creep via a user-defined subroutine CREEP. The parameters of the creep law could be identified by adaptation to monoaxial creep tests [de

Nondestructive damage detection and evaluation technique for seismically damaged structures

Science.gov (United States)

Adachi, Yukio; Unjoh, Shigeki; Kondoh, Masuo; Ohsumi, Michio

1999-02-01

The development of quantitative damage detection and evaluation technique, and damage detection technique for invisible damages of structures are required according to the lessons from the 1995 Hyogo-ken Nanbu earthquake. In this study, two quantitative damage sensing techniques for highway bridge structures are proposed. One method is to measure the change of vibration characteristics of the bridge structure. According to the damage detection test for damaged bridge column by shaking table test, this method can successfully detect the vibration characteristic change caused by damage progress due to increment excitations. The other method is to use self-diagnosis intelligent materials. According to the reinforced concrete beam specimen test, the second method can detect the damage by rupture of intelligent sensors, such as optical fiber or carbon fiber reinforced plastic rod.

Aspects of the Brazilian law on civil liability for nuclear damage

International Nuclear Information System (INIS)

Rocha, L.M.G. da

1980-06-01

The civil liability for nuclear damage in the Brazilian law is analysed. The innovations introduced by the 6.453 act of October 17 th, 1977 are emphasized. The influence of international conventions on the Brazilian law are also mentioned. (A.L.) [pt

Internal Validity: A Must in Research Designs

Science.gov (United States)

Cahit, Kaya

2015-01-01

In experimental research, internal validity refers to what extent researchers can conclude that changes in dependent variable (i.e. outcome) are caused by manipulations in independent variable. The causal inference permits researchers to meaningfully interpret research results. This article discusses (a) internal validity threats in social and…

First and Second-Law Efficiency Analysis and ANN Prediction of a Diesel Cycle with Internal Irreversibility, Variable Specific Heats, Heat Loss, and Friction Considerations

Directory of Open Access Journals (Sweden)

M. M. Rashidi

2014-04-01

Full Text Available The variability of specific heats, internal irreversibility, heat and frictional losses are neglected in air-standard analysis for different internal combustion engine cycles. In this paper, the performance of an air-standard Diesel cycle with considerations of internal irreversibility described by using the compression and expansion efficiencies, variable specific heats, and losses due to heat transfer and friction is investigated by using finite-time thermodynamics. Artificial neural network (ANN is proposed for predicting the thermal efficiency and power output values versus the minimum and the maximum temperatures of the cycle and also the compression ratio. Results show that the first-law efficiency and the output power reach their maximum at a critical compression ratio for specific fixed parameters. The first-law efficiency increases as the heat leakage decreases; however the heat leakage has no direct effect on the output power. The results also show that irreversibilities have depressing effects on the performance of the cycle. Finally, a comparison between the results of the thermodynamic analysis and the ANN prediction shows a maximum difference of 0.181% and 0.194% in estimating the thermal efficiency and the output power. The obtained results in this paper can be useful for evaluating and improving the performance of practical Diesel engines.

In situ observations of microscale damage evolution in unidirectional natural fibre composites

DEFF Research Database (Denmark)

Rask, Morten; Madsen, Bo; Sørensen, Bent F.

2012-01-01

Synchrotron X-ray tomographic microscopy (XTM) has been used to observe in situ damage evolution in unidirectional flax fibre yarn/polypropylene composites loaded in uniaxial tension at stress levels between 20% and 95% of the ultimate failure stress. XTM allows for 3D visualization of the internal...... damage state at each stress level. The overall aim of the study is to gain a better understanding of the damage mechanisms in natural fibre composites. This is necessary if they are to be optimized to fulfil their promising potential. Three dominating damage mechanisms have been identified: (i) interface...... splitting cracks typically seen at the interfaces of bundles of unseparated fibres, (ii) matrix shear cracks, and (iii) fibre failures typically seen at fibre defects. Based on the findings in the present study, well separated fibres with a low number of defects are recommended for composite reinforcements....

The Carrier's Liability for Damage Caused by Delay in International Air Transport

Science.gov (United States)

Lee, Kang Bin

2003-01-01

Delay in the air transport occurs when passengers, baggage or cargo do not arrive at their destination at the time indicated in the contract of carriage. The causes of delay in the carriage of passengers are booking errors or double booking, delayed departure of aircraft, incorrect information regarding the time of departure, failure to land at the scheduled destination and changes in flight schedule or addition of extra landing stops. Delay in the carriage of baggage or cargo may have different causes: no reservation, lack of space, failure to load the baggage or cargo at the right place, or to deliver the covering documents at the right place. The Montreal Convention of 1999 Article 19 provides that 'The carrier is liable for damage occasioned by delay in the carriage by air of passengers, baggage or cargo. Nevertheless, the carder shall not be liable for damage occasioned by delay if it proves that it and its servants and agents took all measures that could reasonably be required to avoid the damage or that it was impossible for it or them to take such measures'. The Montreal Convention Article 22 provides liability limits of the carrier in case of delay for passengers and their baggage and for cargo. In the carriage of persons, the liability of the carrier for each passenger is limited to 4,150 SDR. In the carriage of baggage, the liability of the carrier is limited to 1,000 SDR for each passenger unless a special declaration as to the value of the baggage has been made. In the carriage of cargo, the liability of the carrier is limited to 17 SDR per kilogram unless a special declaration as to the value of the cargo has been made. The Montreal Convention Article 19 has shortcomings: it is silent on the duration of the liability for carriage,andit does not make any distinction between persons and good. It does not give any indication concerning the circumstances to be taken into account in cases of delay, and about the length of delay. In conclusion, it is

Crowdsourcing earthquake damage assessment using remote sensing imagery

Directory of Open Access Journals (Sweden)

Stuart Gill

2011-06-01

Full Text Available This paper describes the evolution of recent work on using crowdsourced analysis of remote sensing imagery, particularly high-resolution aerial imagery, to provide rapid, reliable assessments of damage caused by earthquakes and potentially other disasters. The initial effort examined online imagery taken after the 2008 Wenchuan, China, earthquake. A more recent response to the 2010 Haiti earthquake led to the formation of an international consortium: the Global Earth Observation Catastrophe Assessment Network (GEO-CAN. The success of GEO-CAN in contributing to the official damage assessments made by the Government of Haiti, the United Nations, and the World Bank led to further development of a web-based interface. A current initiative in Christchurch, New Zealand, is underway where remote sensing experts are analyzing satellite imagery, geotechnical engineers are marking liquefaction areas, and structural engineers are identifying building damage. The current site includes online training to improve the accuracy of the assessments and make it possible for even novice users to contribute to the crowdsourced solution. The paper discusses lessons learned from these initiatives and presents a way forward for using crowdsourced remote sensing as a tool for rapid assessment of damage caused by natural disasters around the world.

Evaluation of internal flooding in a BWR

International Nuclear Information System (INIS)

Shiu, K.; Papazoglou, I.A.; Sun, Y.H.; Anavim, E.; Ilberg, D.

1985-01-01

Flooding inside a nuclear power station is capable of concurrently disabling redundant safety systems. This paper presents the results of a recent review study performed on internally-generated floods inside a boiling water reactor (BWR) reactor building. The study evaluated the flood initiator frequency due to either maintenance or ruptures using Markovian models. A time phased event tree approach was adopted to quantify the core damage frequency based on the flood initiator frequency. It is found in the study that the contribution to the total core damage due to internal flooding events is not insignificant and is comparable to other transient contributors. The findings also indicate that the operator plays an important role in the prevention as well as the mitigation of a flooding event

Legal protection against nuclear damage

Energy Technology Data Exchange (ETDEWEB)

NONE

1959-04-15

The IAEA Director General appointed an international Panel of Experts to go into the question of Civil Liability and State Responsibility for Nuclear Hazards. The Panel had before it certain basic postulates formulated after a preliminary and tentative consideration of the subject. From the viewpoint of the public, the first postulate is, of course, that the use of nuclear energy be regulated by adequate licensing and control mechanisms so as to prevent any accidents. To the extent, however, that nuclear damage cannot be prevented, there must be liability on the part of the enterprise which caused the damage and, where damage exceeds its liability or its financial resources there should be some assurance of compensation by the State. This should be so not only within the borders of one State, but especially also on an international basis. Security should be required for the possible liability of the enterprises connected with a nuclear incident. Litigation with respect to liability should be concentrated in the most convenient tribunal and be governed by a single clearly defined law. The methods of distribution should meet general standards of equity and be as expeditious as possible. Emergency measures, especially evacuation, first aid and decontamination, should be organized and financed without delay. At the same time, the liability of an enterprise should not exceed its reasonable financial capabilities. This means that a ceiling should be imposed upon the amount of third party liability to which an enterprise could be held. And the liability should generally be such as can be covered by adequate financial security. Uniformity in the treatment of victims of nuclear incidents in all these fields is a desirable goal. Yet, if a rule adopted on an international level or suggested by uniform legislation were to be viable, it should adapt itself to the social, economic and legal order already existing in individual States. This may mean that in certain fields it

Legal protection against nuclear damage

International Nuclear Information System (INIS)

1959-01-01

The IAEA Director General appointed an international Panel of Experts to go into the question of Civil Liability and State Responsibility for Nuclear Hazards. The Panel had before it certain basic postulates formulated after a preliminary and tentative consideration of the subject. From the viewpoint of the public, the first postulate is, of course, that the use of nuclear energy be regulated by adequate licensing and control mechanisms so as to prevent any accidents. To the extent, however, that nuclear damage cannot be prevented, there must be liability on the part of the enterprise which caused the damage and, where damage exceeds its liability or its financial resources there should be some assurance of compensation by the State. This should be so not only within the borders of one State, but especially also on an international basis. Security should be required for the possible liability of the enterprises connected with a nuclear incident. Litigation with respect to liability should be concentrated in the most convenient tribunal and be governed by a single clearly defined law. The methods of distribution should meet general standards of equity and be as expeditious as possible. Emergency measures, especially evacuation, first aid and decontamination, should be organized and financed without delay. At the same time, the liability of an enterprise should not exceed its reasonable financial capabilities. This means that a ceiling should be imposed upon the amount of third party liability to which an enterprise could be held. And the liability should generally be such as can be covered by adequate financial security. Uniformity in the treatment of victims of nuclear incidents in all these fields is a desirable goal. Yet, if a rule adopted on an international level or suggested by uniform legislation were to be viable, it should adapt itself to the social, economic and legal order already existing in individual States. This may mean that in certain fields it

Modeling of damage evaluation in thin composite plate loaded by pressure loading

Directory of Open Access Journals (Sweden)

Dudinský M.

2012-12-01

Full Text Available This article presents the results of numerical analysis of elastic damage of thin laminated long fiber-reinforced composite plate consisting of unidirectional layers which is loaded by uniformly distributed pressure. The analysis has been performed by means of the finite element method (FEM. The numerical implementation uses layered plate finite elements based on the Kirchhoff plate theory. System of nonlinear equations has been solved by means of the Newton- Raphson procedure. Evolution of damage has been solved using the return-mapping algorithm based on the continuum damage mechanics (CDM. The analysis was performed using own program created in MATLAB. Problem of laminated fiber-reinforced composite plate fixed on edges for two different materials and three different laminate stacking sequences (LSS was simulated. Evolution of stresses vs. strains and also evolution of damage variables in critical points of the structure are shown.

Analysis about factors affecting the degree of damage of buildings in earthquake

International Nuclear Information System (INIS)

Jia, Jing; Yan, Jinghong

2015-01-01

Earthquakes have been affecting human's safety through human's history. Previous studies on earthquake, mostly, focused on the performance of buildings or evaluating damages. This paper, however, compares different factors that have influence on the damage of buildings with a case study in Wenchuan earthquake, using multiple linear regression methodology, so as to identify to what extend this factors influence the buildings’ damages, then give the rank of importance of these factors. In this process, authors take the type of structure as a dummy variable to compare the degree of damages caused by different types of structure, which were barely studied before. Besides, Factor Analysis Methodology(FA) will be adapted to classify factors, the results of which will simplify later study. The outcome of this study would make a big difference in optimizing the seismic design and improving residential seismic quality. (paper)

On the need for data for the verification of service life models for frost damage

DEFF Research Database (Denmark)

Geiker, Mette Rica; Engelund, Sven

1999-01-01

The purpose of this paper is to draw the attention to the need for the verification of service life models for frost attack on concrete and the collection of relevant data. To illustrate the type of data needed the paper presents models for internal freeze/thaw damage (internal cracking including...

Relative effectiveness of electron-proton damage on organic coatings

International Nuclear Information System (INIS)

Bartolomei, P.; Cabrini, A.

1988-01-01

With aim to verify the validity of simulation with photon irradiators, of damage caused on internal containment coatings by beta plus gamma mixed field following to a LOCA in LWR, irradiation tests with Co 60 photon and with nearly 1.5 MeV mean energy electrons have been performed. Changes of some properties of coating film have been verified versus absorbed doses up to 1000 KGy (100 Mrad). A special technique for measurement of dose absorbed in thin film of coating has been tested, to be related to absorbed dose in organic dosimeters and in water (Fricke solution) dosimeter. The changes of considered properties (tensile strength, ease to decontamination, color, brightness) do not allow at the moment, to determine undoubtedly the degree of equivalence between radiation damage to coatings by two types of radiation. A strong backscatter effect mainly evident in electron irradiation, has been pointed out, which contribute to damage to coating film

Fuel containment, lightning protection and damage tolerance in large composite primary aircraft structures

Science.gov (United States)

Griffin, Charles F.; James, Arthur M.

1985-01-01

The damage-tolerance characteristics of high strain-to-failure graphite fibers and toughened resins were evaluated. Test results show that conventional fuel tank sealing techniques are applicable to composite structures. Techniques were developed to prevent fuel leaks due to low-energy impact damage. For wing panels subjected to swept stroke lightning strikes, a surface protection of graphite/aluminum wire fabric and a fastener treatment proved effective in eliminating internal sparking and reducing structural damage. The technology features developed were incorporated and demonstrated in a test panel designed to meet the strength, stiffness, and damage tolerance requirements of a large commercial transport aircraft. The panel test results exceeded design requirements for all test conditions. Wing surfaces constructed with composites offer large weight savings if design allowable strains for compression can be increased from current levels.

Eccentric crank variable compression ratio mechanism

Science.gov (United States)

Lawrence, Keith Edward [Kobe, JP; Moser, William Elliott [Peoria, IL; Roozenboom, Stephan Donald [Washington, IL; Knox, Kevin Jay [Peoria, IL

2008-05-13

A variable compression ratio mechanism for an internal combustion engine that has an engine block and a crankshaft is disclosed. The variable compression ratio mechanism has a plurality of eccentric disks configured to support the crankshaft. Each of the plurality of eccentric disks has at least one cylindrical portion annularly surrounded by the engine block. The variable compression ratio mechanism also has at least one actuator configured to rotate the plurality of eccentric disks.

Correlations between rainfall data and insurance damage data related to sewer flooding for the case of Aarhus, Denmark

DEFF Research Database (Denmark)

Spekkers, Matthieu; Zhou, Qianqian; Arnbjerg-Nielsen, Karsten

Sewer flooding due to extreme rainfall may result in considerable damage. Damage data to quantify costs of cleaning, drying, and replacing materials and goods are rare in literature. In this study, insurance claim data related to property damages were analysed for the municipality of Aarhus...... to underestimations of correlations between rainfall and damage variables. Rainfall data from two rain gauges were used to extract rainfall characteristics. From cross correlations between time series of rainfall and claim data, it can be concluded that rainfall events induce claims mostly on the same day, but also...

Liability and insurance aspects of international transport of nuclear materials

International Nuclear Information System (INIS)

van Gijn, S.H.

1985-01-01

The Paris and Vienna Conventions do not affect the application of any international transport agreement already in force. However, in certain circumstances both the nuclear operator and the carrier may be held liable for nuclear damage which arises during international transports of nuclear materials. The ensuing cumulation of liabilities under the Nuclear and Transport Conventions may cause serious problems in obtaining adequate insurance cover for such transports. The 1971 Brussels Convention seeks to solve this problem by exonerating any person who might be held liable for nuclear damage under an international maritime convention or national law. Similar difficulties are encountered in the case of transports of nuclear materials between states which have and states which have not ratified the Paris and Vienna Conventions. (NEA) [fr

Causes of keel bone damage and their solutions in laying hens

NARCIS (Netherlands)

Harlander-Matauschek, A.; Rodenburg, T.B.; Sandilands, V.; Tobalske, B.W.; Toscano, M.J.

2015-01-01

Keel bone damage (KBD) is a critical issue facing the contemporary laying hen industry due to the likely pain leading to compromised welfare and reduced productivity. Recent reports suggest that KBD, while highly variable and likely dependent on a host of factors, extends to all housing systems

Characterisation of neutron irradiation damage in zirconium alloys - a 'Round Robin' experiment

International Nuclear Information System (INIS)

Kelly, P.M.; Blake, R.G.; Jostsons, A.

1977-01-01

The nature of the damage structure in the neutron-irradiated zirconium specimens supplied as part of an international 'Round Robin' experiment has been studied using transmission electron microscopy. The damage structure consists entirely of a/3 dislocation loops and no evidence has been found for c component loops. Both vacancy and interstitial loops were found in specimens where inside/outside contrast analysis was possible. Quantitative measurements of loop size distributions and loop concentrations are reported. All specimens exhibited corduroy contrast to varying degress. (author)

Damage detection methodology under variable load conditions based on strain field pattern recognition using FBGs, nonlinear principal component analysis, and clustering techniques

Science.gov (United States)

Sierra-Pérez, Julián; Torres-Arredondo, M.-A.; Alvarez-Montoya, Joham

2018-01-01

Structural health monitoring consists of using sensors integrated within structures together with algorithms to perform load monitoring, damage detection, damage location, damage size and severity, and prognosis. One possibility is to use strain sensors to infer structural integrity by comparing patterns in the strain field between the pristine and damaged conditions. In previous works, the authors have demonstrated that it is possible to detect small defects based on strain field pattern recognition by using robust machine learning techniques. They have focused on methodologies based on principal component analysis (PCA) and on the development of several unfolding and standardization techniques, which allow dealing with multiple load conditions. However, before a real implementation of this approach in engineering structures, changes in the strain field due to conditions different from damage occurrence need to be isolated. Since load conditions may vary in most engineering structures and promote significant changes in the strain field, it is necessary to implement novel techniques for uncoupling such changes from those produced by damage occurrence. A damage detection methodology based on optimal baseline selection (OBS) by means of clustering techniques is presented. The methodology includes the use of hierarchical nonlinear PCA as a nonlinear modeling technique in conjunction with Q and nonlinear-T 2 damage indices. The methodology is experimentally validated using strain measurements obtained by 32 fiber Bragg grating sensors bonded to an aluminum beam under dynamic bending loads and simultaneously submitted to variations in its pitch angle. The results demonstrated the capability of the methodology for clustering data according to 13 different load conditions (pitch angles), performing the OBS and detecting six different damages induced in a cumulative way. The proposed methodology showed a true positive rate of 100% and a false positive rate of 1.28% for a

Damage Identification of Bridge Based on Chebyshev Polynomial Fitting and Fuzzy Logic without Considering Baseline Model Parameters

Directory of Open Access Journals (Sweden)

Yu-Bo Jiao

2015-01-01

Full Text Available The paper presents an effective approach for damage identification of bridge based on Chebyshev polynomial fitting and fuzzy logic systems without considering baseline model data. The modal curvature of damaged bridge can be obtained through central difference approximation based on displacement modal shape. Depending on the modal curvature of damaged structure, Chebyshev polynomial fitting is applied to acquire the curvature of undamaged one without considering baseline parameters. Therefore, modal curvature difference can be derived and used for damage localizing. Subsequently, the normalized modal curvature difference is treated as input variable of fuzzy logic systems for damage condition assessment. Numerical simulation on a simply supported bridge was carried out to demonstrate the feasibility of the proposed method.

Third party liability for nuclear damage

International Nuclear Information System (INIS)

Crancher, D.W.

1976-12-01

Basic principles of nuclear liability legislation are discussed including absolute and limited liability and the role of the Sovereign State in idemnifying the operator for damage in excess of limited liability. European counrties realised the need for unifying the law of nuclear instability and efforts were made accordingly towards producing workable international conventions. The world's first legislation on nuclear liability - the USA Price-Anderson Act - is described in detail and a digest of nuclear liability claims experience is given. Observations of the present status of nuclear third party liability are outlined. (Author)

US Human Rights Conduct and International Legitimacy

DEFF Research Database (Denmark)

Keating, Vincent Charles

Did the Bush administration fundamentally harm the international human rights system through its rejection of human rights norms? This is the central question explored within US Human Rights Conduct and International Legitimacy, which analyses the practices of legitimacy between the Bush...... nations have followed in America's footsteps, and that the Bush administration's deviation from international norms has served to reaffirm worldwide commitment to human rights....... administration, states, and international organizations in cases of torture, habeas corpus, and rendition. Vincent Keating argues that despite the material power of the United States, there is little evidence that the Bush administration gravely damaged international norms on torture and habeas corpus as few...

Search Results | Page 5 | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 41 - 50 of 80 ... Applying ICT for Disaster Mitigation in the Central American ... Central America is subject to frequent climate variability resulting in floods and droughts. ... Accumulated environmental, economic, and social damages to date ...

High Turndown Ratio, High Delta-Emittance, Variable Emissivity Electrochromics, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Variable-emittance materials are in high demand for applications ranging from manned and unmanned space platforms (e.g. in radiators at the Moon's poles where damage...

Regulation of annexins following infection like tissue damage – investigated by 2-dimensional gel electrophoresis

DEFF Research Database (Denmark)

Wulff, Tune; Nielsen, Michael Engelbrecht

are regulated after tissue damaged on the protein level. These proteins have been assign to functions like regulation of coagulation, apoptosis, and exocytosis, indicating their importance following infection and subsequent repair in fish. In addition the regulation observed in this study are supported...... an established model. In the model infection is mimicked by a well-defined tissue damage allowing each fish to be equally affected. Samples were taken 7 days after tissue damage and included samples from the damaged tissue, internal control and an external control. Changes in protein expression between the wound...... by previous findings on the mRNA level, where both proteins are regulated following infection. In conclusion this study show regulation on the protein level of two members of the annexin protein family after infection like tissue damage....

Damage Detection in Bridge Structure Using Vibration Data under Random Travelling Vehicle Loads

International Nuclear Information System (INIS)

Loh, C H; Hung, T Y; Chen, S F; Hsu, W T

2015-01-01

Due to the random nature of the road excitation and the inherent uncertainties in bridge-vehicle system, damage identification of bridge structure through continuous monitoring under operating situation become a challenge problem. Methods for system identification and damage detection of a continuous two-span concrete bridge structure in time domain is presented using interaction forces from random moving vehicles as excitation. The signals recorded in different locations of the instrumented bridge are mixed with signals from different internal and external (road roughness) vibration sources. The damage structure is also modelled as the stiffness reduction in one of the beam element. For the purpose of system identification and damage detection three different output-only modal analysis techniques are proposed: The covariance-driven stochastic subspace identification (SSI-COV), the blind source separation algorithms (called Second Order Blind Identification) and the multivariate AR model. The advantages and disadvantages of the three algorithms are discussed. Finally, the null-space damage index, subspace damage indices and mode shape slope change are used to detect and locate the damage. The proposed approaches has been tested in simulation and proved to be effective for structural health monitoring. (paper)

Climate change and hailstorm damage: Empirical evidence and implications for agriculture and insurance

International Nuclear Information System (INIS)

Botzen, W.J.W.; Bouwer, L.M.; van den Bergh, J.C.J.M.

2010-01-01

There is much uncertainty about the effects of anthropogenic climate change on the frequency and severity of extreme weather events like hailstorms, and subsequent economic losses, while this is also relevant information for the design of climate policy. Few studies conducted indicate that a strong positive relation exists between hailstorm activity and hailstorm damage, as predicted by minimum temperatures using simple correlations. This relation suggests that hailstorm damage may increase in the future if global warming leads to further temperature increase. This study estimates a range of Tobit models of relations between normalized insured hailstorm damage to agriculture and several temperature and precipitation indicators for the Netherlands. Temporal dynamics are explicitly modelled. A distinction is made between damage costs for greenhouse horticulture and outdoor farming, which appear to be differently affected by variability in weather. 'Out of sample' forecast tests show that a combination of maximum temperatures and precipitation predicts hailstorm damage best. Extrapolations of the historical relations between hailstorm damage and weather indicators under climate change scenarios project a considerable increase in future hailstorm damage. Our estimates show that by 2050 annual hailstorm damage to outdoor farming could increase by between 25% and 50%, with considerably larger impacts on greenhouse horticulture in summer of more than 200%. The economic implications of more hailstorm damage for, and adaptation by, the agricultural and insurance sectors are discussed. (author)

Analysis of the damage threshold of the GaAs pseudomorphic high electron mobility transistor induced by the electromagnetic pulse

International Nuclear Information System (INIS)

Xi Xiao-Wen; Chai Chang-Chun; Liu Yang; Yang Yin-Tang; Fan Qing-Yang; Shi Chun-Lei

2016-01-01

An electromagnetic pulse (EMP)-induced damage model based on the internal damage mechanism of the GaAs pseudomorphic high electron mobility transistor (PHEMT) is established in this paper. With this model, the relationships among the damage power, damage energy, pulse width and signal amplitude are investigated. Simulation results show that the pulse width index from the damage power formula obtained here is higher than that from the empirical formula due to the hotspot transferring in the damage process of the device. It is observed that the damage energy is not a constant, which decreases with the signal amplitude increasing, and then changes little when the signal amplitude reaches up to a certain level. (paper)

Low-Frequency Temporal Variability in Mira and Semiregular Variables

Science.gov (United States)

Templeton, Matthew R.; Karovska, M.; Waagen, E. O.

2012-01-01

We investigate low-frequency variability in a large sample of Mira and semiregular variables with long-term visual light curves from the AAVSO International Database. Our aim is to determine whether we can detect and measure long-timescale variable phenomena in these stars, for example photometric variations that might be associated with supergranular convection. We analyzed the long-term light curves of 522 variable stars of the Mira and SRa, b, c, and d classes. We calculated their low-frequency time-series spectra to characterize rednoise with the power density spectrum index, and then correlate this index with other observable characteristics such as spectral type and primary pulsation period. In our initial analysis of the sample, we see that the semiregular variables have a much broader range of spectral index than the Mira types, with the SRb subtype having the broadest range. Among Mira variables we see that the M- and S-type Miras have similarly wide ranges of index, while the C-types have the narrowest with generally shallower slopes. There is also a trend of steeper slope with larger amplitude, but at a given amplitude, a wide range of slopes are seen. The ultimate goal of the project is to identify stars with strong intrinsic red noise components as possible targets for resolved surface imaging with interferometry.

Fisetin yeast-based bio-capsules via osmoporation: effects of process variables on the encapsulation efficiency and internalized fisetin content.

Science.gov (United States)

de Câmara, Antonio Anchieta; Dupont, Sébastien; Beney, Laurent; Gervais, Patrick; Rosenthal, Amauri; Correia, Roberta Targino Pinto; Pedrini, Márcia Regina da Silva

2016-06-01

Osmoporation is an innovative method that can be used with food-grade yeast cells of Saccharomyces cerevisiae as natural encapsulating matrices. This technique overcomes barriers that difficult encapsulation and enables the internalization of fragile bioactive molecules such as fisetin into yeasts. In the present study, we assessed the effects of concentration, osmotic pressure, and temperature on the encapsulation efficiency (EE) and internalized fisetin content (IF). Two different quantification strategies were investigated: direct extraction (DE) without cell washing or freeze-drying steps and indirect extraction (IE) performed after washings with ethanol and freeze-drying. Our results showed that osmoporation improved EE (33 %) and IF (1.199 mg). The best experimental conditions were found by using DE. High-resolution images showed that the yeast cell envelope was preserved during osmoporation at 30 MPa and 84 % of yeast cells remained viable after treatment. Washing cells with organic solvent led to decreased EE (0.65 %) and IF (0.023 mg). This was probably due to either damages caused to yeast cell envelope or fisetin dragged out of cell. Overall, the results demonstrated the adequacy and relevant biotechnological potential of yeasts as encapsulating matrices for hydrophobic compounds. This fresh biotechnological approach has proven to be a promising tool for the production of bioactive-rich food products.

Existence of a current price as a precondition for abstract method for calculating damages in international and Serbian sales law

Directory of Open Access Journals (Sweden)

Fišer-Šobot Sandra

2014-01-01

Full Text Available If the contract is avoided and there is a current price for the goods, the party claiming damages may recover the difference between the price fixed by the contract and the current price at specific time and at specific place. Abstract calculation of loss is possible only when the contract goods have current price. Current price is the price generally charged for such goods sold under comparable circumstances in the trade concerned. According to the CISG and Serbian Law of Obligations, for the determination of the current price is relevant time of avoidance. This general rule is not applicable in international sales law when the party claiming damages has avoided the contract after taking over the goods. In that case, the current price at the time of taking over shall be applicable instead of the current price at the time of avoidance. Current price rule contained in the Art. 76(2 of the CISG presupposes that the current price is the price prevailing at the place where the delivery of the goods should have been made, or if there is no current price at the place, the price at such other place as serves as a reasonable substitute, making due allowance for differences in the cost of transporting the goods. Pursuant to Art. 524(2 Of Serbian Law of Obligations, however, relevant is the price in the market of the place of effecting the transaction. Formulation place of effecting the transaction is unclear and vague and can create different problems. Therefore, this rule should be amended and the relevant place should be the place of delivery.

Damage observation in a high-manganese austenitic TWIP steel by synchrotron radiation computed tomography

International Nuclear Information System (INIS)

Lorthios, J.; Nguyen, F.; Gourgues, A.-F.; Morgeneyer, T.F.; Cugy, P.

2010-01-01

Internal damage below the fracture surface of a multiaxial specimen made of twinning-induced plasticity (TWIP) steel was observed by three-dimensional X-ray microtomography as very elongated 'primary' voids. Specific tools for the local damage analysis were developed. A gradient in void volume fraction was measured from the fracture surface down to the bulk of the scanned volume (from ∼0.06% to 90% in area fraction), indicating strongly localized final fracture.

Genotypic variability and relationships between mite infestation levels, mite damage, grooming intensity, and removal of Varroa destructor mites in selected strains of worker honey bees (Apis mellifera L.).

Science.gov (United States)

Guzman-Novoa, Ernesto; Emsen, Berna; Unger, Peter; Espinosa-Montaño, Laura G; Petukhova, Tatiana

2012-07-01

The objective of this study was to demonstrate genotypic variability and analyze the relationships between the infestation levels of the parasitic mite Varroa destructor in honey bee (Apis mellifera) colonies, the rate of damage of fallen mites, and the intensity with which bees of different genotypes groom themselves to remove mites from their bodies. Sets of paired genotypes that are presumably susceptible and resistant to the varroa mite were compared at the colony level for number of mites falling on sticky papers and for proportion of damaged mites. They were also compared at the individual level for intensity of grooming and mite removal success. Bees from the "resistant" colonies had lower mite population rates (up to 15 fold) and higher percentages of damaged mites (up to 9 fold) than bees from the "susceptible" genotypes. At the individual level, bees from the "resistant" genotypes performed significantly more instances of intense grooming (up to 4 fold), and a significantly higher number of mites were dislodged from the bees' bodies by intense grooming than by light grooming (up to 7 fold) in all genotypes. The odds of mite removal were high and significant for all "resistant" genotypes when compared with the "susceptible" genotypes. The results of this study strongly suggest that grooming behavior and the intensity with which bees perform it, is an important component in the resistance of some honey bee genotypes to the growth of varroa mite populations. The implications of these results are discussed. Copyright © 2012 Elsevier Inc. All rights reserved.

Primary DNA Damage in Dry Cleaners with Perchlorethylene Exposure

Directory of Open Access Journals (Sweden)

Mohammad Azimi

2017-10-01

Full Text Available Background: Perchloroethylene is a halogenated solvent widely used in dry cleaning. International agency of research on cancer classified this chemical as a probable human carcinogen. Objective: To evaluate the extent of primary DNA damage in dry cleaner workers who were exposed to perchloroethylene as compared to non-exposed subjects. The effect of exposure modifying factors such as use of personal protective equipment, perceived risk, and reported safe behaviors on observed DNA damage were also studied. Methods: 59 exposed and non-exposed workers were selected from Yazd, Iran. All the 33 exposed workers had work history at least 3 months in the dry cleaning shops. Peripheral blood sampling was performed. Microscope examination was performed under fluorescent microscope (400×. Open comet software was used for image analysis. All biological analysis was performed in one laboratory. Results: Primary DNA damage to leukocytes in dry cleaners was relatively high. The median tail length, %DNA in tail, and tail moment in exposed group were significantly higher than those in non-exposed group. There was no significant difference between smokers and nonsmokers in terms of tail length, tail moment, and %DNA in tail. There was no significant correlation between duration of employment in dry cleaning and observed DNA damage in terms of tail length, tail moment and %DNA in tail. Stratified analysis based on exposed and nonexposed category showed no significant relationship between age and observed DNA damage. Conclusion: Occupationally exposure to perchloroethylene can cause early DNA damage in dry cleaners.

submitter Damage evolution in a stainless steel bar undergoing phase transformation under torsion at cryogenic temperatures

CERN Document Server

Ortwein, R; Skoczen, B

2016-01-01

Phase transformation driven by plastic strains is commonly observed in austenitic stainless steels. In the present paper, this phenomenon is addressed in connection with damage evolution. A three-dimensional constitutive model has been derived, and scalar variables for damage and the volume fraction of the transformed phase were used. The model was solved using Abaqus UMAT user defined procedure, as well as by means of simplified one-dimensional approach for a twisted circular bar. Large experimental campaign of tests was performed, including martensite content measurements within the cross-section and on the surface of the bar during monotonic and cyclic loading. Based on the residual angle of twist, damage variable was calculated. The global response of torque versus the angle of twist was measured as well. Comparison between the experimental results and the results obtained from the simplified one-dimensional approach and from the full three-dimensional approach are presented. It turns out that one-dimensi...

Effect of ship structure and size on grounding and collision damage distributions

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Zhang, Shengming

2000-01-01

It has been argued that a major shortcoming in the International Maritime Organization (IMO) Interim Guidelines for Approval of Alternative Methods of Design and Construction of Oil Tankers in Collision and Grounding is that grounding and collision damages normalized by the main dimensions...... are expressed in simple expressions involving structural dimensions and the building material of the ships. The study shows that the density distribution for collision and grounding damages normalized by the main dimensions of the ship depends on the size of the ship. A larger ship has a higher probability...

New tendencies in the legal mark give the civil liability for nuclear damages

International Nuclear Information System (INIS)

Gil Portela, Rosario; Alonso Gonzalez, Ivonne

1998-01-01

The development gives an indispensable legal mark for the execution a nuclear program it includes relative special dispositions to the civil liability for nuclear damages. The existence gives an international regime in this matter and its current improvement, give the one that Cuba is State it leaves, it conditions the inclusion additional requirements in the national legislative system on civil liability relatives to the possible damages that it could cause to the personal one and environment in general a nuclear accident

Automated Damage Onset Analysis Techniques Applied to KDP Damage and the Zeus Small Area Damage Test Facility

International Nuclear Information System (INIS)

Sharp, R.; Runkel, M.

1999-01-01

Automated damage testing of KDP using LLNL's Zeus automated damage test system has allowed the statistics of KDP bulk damage to be investigated. Samples are now characterized by the cumulative damage probability curve, or S-curve, that is generated from hundreds of individual test sites per sample. A HeNe laser/PMT scatter diagnostic is used to determine the onset of damage at each test site. The nature of KDP bulk damage is such that each scatter signal may possess many different indicators of a damage event. Because of this, the determination of the initial onset for each scatter trace is not a straightforward affair and has required considerable manual analysis. The amount of testing required by crystal development for the National Ignition Facility (NIF) has made it impractical to continue analysis by hand. Because of this, we have developed and implemented algorithms for analyzing the scatter traces by computer. We discuss the signal cleaning algorithms and damage determination criteria that have lead to the successful implementation of a LabView based analysis code. For the typical R/1 damage data set, the program can find the correct damage onset in more than 80% of the cases, with the remaining 20% being left to operator determination. The potential time savings for data analysis is on the order of ∼ 100X over manual analysis and is expected to result in the savings of at least 400 man-hours over the next 3 years of NIF quality assurance testing

The Taiwanese-American occultation survey project stellar variability. III. Detection of 58 new variable stars

Energy Technology Data Exchange (ETDEWEB)

Ishioka, R.; Wang, S.-Y.; Zhang, Z.-W.; Lehner, M. J.; Cook, K. H.; King, S.-K.; Lee, T.; Marshall, S. L.; Schwamb, M. E.; Wang, J.-H.; Wen, C.-Y. [Institute of Astronomy and Astrophysics, Academia Sinica, 11F of Astronomy-Mathematics Building, National Taiwan University, No. 1, Sec. 4, Roosevelt Road, Taipei 10617, Taiwan (China); Alcock, C.; Protopapas, P. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Axelrod, T. [Steward Observatory, 933 North Cherry Avenue, Room N204, Tucson, AZ 85721 (United States); Bianco, F. B. [Center for Cosmology and Particle Physics, New York University, 4 Washington Place, New York, NY 10003 (United States); Byun, Y.-I. [Department of Astronomy and University Observatory, Yonsei University, 134 Shinchon, Seoul 120-749 (Korea, Republic of); Chen, W. P.; Ngeow, C.-C. [Institute of Astronomy, National Central University, No. 300, Jhongda Road, Jhongli City, Taoyuan County 320, Taiwan (China); Kim, D.-W. [Max Planck Institute for Astronomy, Königstuhl 17, D-69117 Heidelberg (Germany); Rice, J. A., E-mail: ishioka@asiaa.sinica.edu.tw [Department of Statistics, University of California Berkeley, 367 Evans Hall, Berkeley, CA 94720 (United States)

2014-04-01

The Taiwanese-American Occultation Survey project is designed for the detection of stellar occultations by small-size Kuiper Belt Objects, and it has monitored selected fields along the ecliptic plane by using four telescopes with a 3 deg{sup 2} field of view on the sky since 2005. We have analyzed data accumulated during 2005-2012 to detect variable stars. Sixteen fields with observations of more than 100 epochs were examined. We recovered 85 variables among a total of 158 known variable stars in these 16 fields. Most of the unrecovered variables are located in the fields observed less frequently. We also detected 58 variable stars which are not listed in the International Variable Star Index of the American Association of Variable Star Observers. These variable stars are classified as 3 RR Lyrae, 4 Cepheid, 1 δ Scuti, 5 Mira, 15 semi-regular, and 27 eclipsing binaries based on the periodicity and the profile of the light curves.

Efficiency of a new internal combustion engine concept with variable piston motion

Directory of Open Access Journals (Sweden)