WorldWideScience

Sample records for internal control standard

  1. 77 FR 43196 - Minimum Internal Control Standards and Technical Standards

    Science.gov (United States)

    2012-07-24

    ... NATIONAL INDIAN GAMING COMMISSION 25 CFR Parts 543 and 547 Minimum Internal Control Standards [email protected] . SUPPLEMENTARY INFORMATION: Part 543 addresses minimum internal control standards (MICS) for Class II gaming operations. The regulations require tribes to establish controls and implement...

  2. International Electrotechnical Commission standards and French material control standards

    International Nuclear Information System (INIS)

    Furet, J.; Weill, J.

    1978-01-01

    There are reported the international standards incorporated into the IEC Subcommitee 45 A (Nuclear Reactor Instrumentation) and the national standards elaborated by the Commissariat a l'Energie Atomique, CEA, Group of normalized control equipment, the degree of application of those being reported on the base design, call of bids and exploitation of nuclear power plants. (J.E. de C)

  3. 78 FR 63873 - Minimum Internal Control Standards

    Science.gov (United States)

    2013-10-25

    ...--though less stringent than--the drop and count process for player interfaces and card tables. By removing... count standards for player interfaces and card games, and intends to address the issue comprehensively... surveillance of kiosks and for the collection and count of their contents. The Commission published a proposed...

  4. 77 FR 58707 - Minimum Internal Control Standards

    Science.gov (United States)

    2012-09-21

    ..., if any), counted, inventoried, and secured by an authorized agent. (ii) Bingo card inventory records... comprehensive standards for the entire Class II gaming environment. The new sections include, for example: Card games; drop and count; surveillance; and gaming promotions and player tracking. The amendments also...

  5. 25 CFR 542.14 - What are the minimum internal control standards for the cage?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for the... SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.14 What are the minimum internal control standards for... and/or procedures that provide at least the level of control described by the standards in this...

  6. 25 CFR 542.8 - What are the minimum internal control standards for pull tabs?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for pull... SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.8 What are the minimum internal control standards for... and/or procedures that provide at least the level of control described by the standards in this...

  7. 25 CFR 542.7 - What are the minimum internal control standards for bingo?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for bingo... SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.7 What are the minimum internal control standards for... utilized, alternate documentation and/or procedures that provide at least the level of control described by...

  8. 78 FR 68447 - Exposure Draft-Standards for Internal Control in the Federal Government

    Science.gov (United States)

    2013-11-14

    ... GOVERNMENT ACCOUNTABILITY OFFICE Exposure Draft--Standards for Internal Control in the Federal... revisions to the Standards for Internal Control in the Federal Government, known as the ``Green Book,'' to... proposed changes contained in the 2013 Exposure Draft update to the Standards for Internal Control in the...

  9. 78 FR 22263 - Advisory Council on the Standards for Internal Control in the Federal Government; Meeting

    Science.gov (United States)

    2013-04-15

    ... GOVERNMENT ACCOUNTABILITY OFFICE Advisory Council on the Standards for Internal Control in the... Standards for Internal Control in the Federal Government; Notice of Meeting. SUMMARY: The US Government Accountability Office (GAO) is initiating efforts to revise the Standards for Internal Control in the Federal...

  10. 78 FR 40740 - Advisory Council on the Standards for Internal Control in the Federal Government

    Science.gov (United States)

    2013-07-08

    ... GOVERNMENT ACCOUNTABILITY OFFICE Advisory Council on the Standards for Internal Control in the... on the Green Book Advisory Council and the Standards for Internal Control in the Federal Government.... SUMMARY: The US Government Accountability Office (GAO) is preparing to revise the Standards for Internal...

  11. Review of international standards related to the design for control rooms on nuclear power plants

    International Nuclear Information System (INIS)

    Kitamura, Masashi; Yoshikawa, Hidekazu; Fujita, Yushi

    2005-01-01

    The improvement of Human-Machine Interface (HMI) design for control rooms on nuclear power plants (NPP) has been accomplished world wide, especially after the TMI-2 accident. The design process and guidelines are standardized in IEC60964 and supplemental standards as international standard. However, technological update is required due to the increased use of computerized control and monitoring equipment and systems in control rooms on NPP in recent years. Standards are becoming more important for computerized control rooms because there is more freedom to design than conventional hardware based system. For computerized control rooms, standards for hardware and software of HMI systems should be also considered. Standards and guidelines for computerized control rooms on NPP have been developed recently in each body such as IEC, ISO, and IEEE etc. Therefore, reviewing these standards and guidelines related to control rooms design of NPP can be useful not only for revision of the international standards such as IEC60964, but also for users of the standards and guidelines. In this paper, we reviewed the international standards related to the design for control rooms, in the two aspects of HMI design and hardware and software design, considering the undergoing revision work and their application. (author)

  12. 25 CFR 542.11 - What are the minimum internal control standards for pari-mutuel wagering?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for pari... INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.11 What are the minimum internal control... documentation and/or procedures that provide at least the level of control described by the standards in this...

  13. 25 CFR 542.17 - What are the minimum internal control standards for complimentary services or items?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for... THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.17 What are the minimum internal control standards for complimentary services or items? (a) Each Tribal gaming regulatory authority or...

  14. INTERDEPENDENCIES OF THE INTERNAL / MANAGERIAL CONTROL STANDARD NO. 6 - ORGANIZATIONAL STRUCTURE

    Directory of Open Access Journals (Sweden)

    Ionut-Cosmin BĂLOI

    2015-06-01

    Full Text Available Our initiative of analyzing the internal control standard which deals with the organizational structure comes from the observations on the significance of these essential aspects of modern management and on the sensitivity with which this standard is treated in most of the public institutions considered representative for the Oltenia region. Although the administrators of public institutions strive to optimize the systems of internal/managerial control, they frequently face many issues concerning the misunderstanding of these standards, vaguely explained, for example throughout some guidelines or other documents. The hypothesis of our study is that most of public institutions face gaps in understanding, interpreting, adapting and implementing an effective model of organizational structure, and the causes are due to the lack of an interdependent, correlated approach of the pillars that support the internal/managerial control system: the 25 standards required by the Romanian legislation. Our study critically describes the superficial approach founded in the self-evaluation reports of the public institutions, if we refer only to the conformity of the organizational structure and the four standards that we consider inextricably related with this internal/managerial control standard. From the methodological point of view, our study tests the correlation between the level of compliance of these standards and the functionality of the system composed by them in the public organizations that we have investigated.

  15. 25 CFR 542.4 - How do these regulations affect minimum internal control standards established in a Tribal-State...

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false How do these regulations affect minimum internal control... COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.4 How do these regulations affect minimum internal control standards established in a Tribal-State compact? (a) If there is a...

  16. 75 FR 55269 - Minimum Internal Control Standards for Class II Gaming

    Science.gov (United States)

    2010-09-10

    ... DEPARTMENT OF THE INTERIOR National Indian Gaming Commission 25 CFR Parts 542 and 543 RIN 3141-AA-37 Minimum Internal Control Standards for Class II Gaming AGENCY: National Indian Gaming Commission. ACTION: Delay of effective date of final rule; request for comments. SUMMARY: The National Indian Gaming...

  17. 76 FR 53817 - Minimum Internal Control Standards for Class II Gaming

    Science.gov (United States)

    2011-08-30

    ... DEPARTMENT OF THE INTERIOR National Indian Gaming Commission 25 CFR Parts 542 and 543 Minimum Internal Control Standards for Class II Gaming AGENCY: National Indian Gaming Commission, Interior. ACTION: Final rule; delay of effective date and request for comments. SUMMARY: The National Indian Gaming...

  18. 77 FR 60625 - Minimum Internal Control Standards for Class II Gaming

    Science.gov (United States)

    2012-10-04

    ... DEPARTMENT OF THE INTERIOR National Indian Gaming Commission 25 CFR Parts 542 and 543 RIN 3141-AA-37 Minimum Internal Control Standards for Class II Gaming AGENCY: National Indian Gaming Commission. ACTION: Final rule; delay of effective date; suspension. SUMMARY: The National Indian Gaming Commission...

  19. A quality control of proteomic experiments based on multiple isotopologous internal standards

    Directory of Open Access Journals (Sweden)

    Adele Bourmaud

    2015-09-01

    Full Text Available The harmonization of proteomics experiments facilitates the exchange and comparison of results. The definition of standards and metrics ensures reliable and consistent data quality. An internal quality control procedure was developed to assess the different steps of a proteomic analysis workflow and perform a system suitability test. The method relies on a straightforward protocol using a simple mixture of exogenous proteins, and the sequential addition of two sets of isotopically labeled peptides added to reference samples. This internal quality control procedure was applied to plasma samples to demonstrate its easy implementation, which makes it generic for most proteomics applications.

  20. International Construction Measurement Standard

    OpenAIRE

    Mitchell, Charles

    2016-01-01

    The International Construction Measurement Standard Coalition (the Coalition) was formed on 17 June 2015 after meeting at the International Monetary Fund in Washington DC, USA. The Coalition, comprising the organisations listed below at the date of publication, aims to bring about consistency in construction cost reporting standards internationally. This is achieved by the creation and adoption of this ICMS, an agreed international standard for the structuring and presentation of cost reports...

  1. EXPERIENCE OF IMPLEMENTATION OF THE LABOR PROTECTION CONTROL SYSTEM AT RUP «BMZ» IN ACCORDANCE WITH INTERNATIONAL STANDARDS OHSAS 180001 AND STATE STANDARD STB 18001

    Directory of Open Access Journals (Sweden)

    I. N. Zhuk

    2010-01-01

    Full Text Available Experience of introduction of the control system by labour protection at RUP «BMZ» in accordance with international standard OHSAS 18001 and State standard STB 18001 is described.

  2. International radiofrequency standards

    International Nuclear Information System (INIS)

    Lincoln, J.

    2001-01-01

    Of the various radiofrequency standards in use around the world, many are based on or similar to the Guidelines published by ICNIRP (The International Commission on Non-ionising Radiation Protection). This organisation is a working group operating in co-operation with the Environmental Health division of the World Health Organisation (WHO). This paper presents a very brief overview of current international standards, beginning with a summary of the salient points of the ICNIRP Guidelines. It should be remembered that these are guidelines only and do not exist as a separate standard. Copyright (2001) Australasian Radiation Protection Society Inc

  3. Business combinations under common control in International Financial Reporting Standards – is authoritative accounting guidance needed?

    Directory of Open Access Journals (Sweden)

    Magdalena Janowicz

    2017-09-01

    Full Text Available Business combinations under common control in International Financial Reporting Standards – is authoritative accounting guidance needed? The purpose of the article is to answer the question if a separate standard (IFRS is needed for business combinations under common control (BCUCC, which are not governed by any IFRS as the moment. In such cases, the approach resulting from IAS 8 should apply to them, which allows the use of national regulations to account for BCUCC. The authoress shortly described the theoretical issues related to the subject and presented the results of empirical research that verified the practical aspects of the problem. The research methodology involves a literature and legal act analysis, content analysis of financial statements, as well as deductive and inductive reasoning. On the basis of the gathered data the authoress concluded that even the existence of necessary regulations in national GAAPs does not guarantee that all the requirements related to the qualitative characteristics of the reported information are met and, as such, the main objectives for which IFRS were developed may not be met. As such, the authoritative guidance proves necessary. Very little research on the subject was published, thus, this paper may provide some additional guidance as to what issues related to BCUCC should receive particular attention.

  4. CTEPP STANDARD OPERATING PROCEDURE FOR CONDUCTING INTERNAL FIELD AUDITS AND QUALITY CONTROL (SOP-2.25)

    Science.gov (United States)

    This SOP describes the method for conducting internal field audits and quality control procedures. Internal field audits will be conducted to ensure the collection of high quality data. Internal field audits will be conducted by Field Auditors (the Field QA Officer and the Field...

  5. Effect of International Standards Certification on Firm-Level Exports: An Application of the Control Function Approach

    OpenAIRE

    Tsunehiro Otsuki

    2011-01-01

    Growing number of firms in developing countries have earned certifications such as International Standards Organization (ISO) as it enhances reputation of their company or brand and attract buyers particularly in export market. This study evaluates the effect of international standards certification on firm's export performance in Europe and Central Asia by applying the control function approach with endogenous treatment effect to firm-level data. Certification is found to increase export sha...

  6. International Financial Reporting Standards

    DEFF Research Database (Denmark)

    Pontoppidan, Caroline Aggestam

    2011-01-01

    The advance of International Financial Reporting Standards (IFRS) across the globe has accelerated over the last few years. This is placing increasing demands on educators to respond to these changes by an increased focus on IFRS in the curricula of accounting students. This paper reviews a range...

  7. International standards for radiation protection

    International Nuclear Information System (INIS)

    Ambrosi, P.

    2011-01-01

    International standards for radiation protection are issued by many bodies. These bodies differ to a large extent in their organisation, in the way the members are designated and in the way the international standards are authorised by the issuing body. Large differences also exist in the relevance of the international standards. One extreme is that the international standards are mandatory in the sense that no conflicting national standard may exist, the other extreme is that national and international standards conflict and there is no need to resolve that conflict. Between these extremes there are some standards or documents of relevance, which are not binding by any formal law or contract but are de facto binding due to the scientific reputation of the issuing body. This paper gives, for radiation protection, an overview of the main standards issuing bodies, the international standards or documents of relevance issued by them and the relevance of these documents. (authors)

  8. The International Standards Organisation offshore structures standard

    International Nuclear Information System (INIS)

    Snell, R.O.

    1994-01-01

    The International Standards Organisation has initiated a program to develop a suite of ISO Codes and Standards for the Oil Industry. The Offshore Structures Standard is one of seven topics being addressed. The scope of the standard will encompass fixed steel and concrete structures, floating structures, Arctic structures and the site specific assessment of mobile drilling and accommodation units. The standard will use as base documents the existing recommended practices and standards most frequently used for each type of structure, and will develop them to incorporate best published and recognized practice and knowledge where it provides a significant improvement on the base document. Work on the Code has commenced under the direction of an internationally constituted sub-committee comprising representatives from most of the countries with a substantial offshore oil and gas industry. This paper outlines the background to the code and the format, content and work program

  9. Nuclear power plants - Instrumentation and control systems important for safety - Classification (International Electrotechnical Commission Standard Publication 1226:1993)

    International Nuclear Information System (INIS)

    Stefanik, J.

    1996-01-01

    This international standard established a method of classification of the information and command functions for nuclear power plants, and the I and C and equipment that provide those functions, into categories that designate the importance for safety of the functions, and the associated systems and equipment. The resulting classification then determines relevant design criteria. The design criteria are the measures of quality by which the adequacy of each functions, and the associated systems and equipment in relation to its importance to plant safety is ensured. In this standard, the criteria are those of functionality, reliability, performance, environmental durability and quality assurance. This standard is applicable to all the information and command functions, and the instrumentation and control systems and equipment that provide those functions. The functions, systems and equipment under consideration provide automated protection, closed or open loop control, and information to the operating staff. They keep the NPP conditions inside the safe operating envelope and provide automatic actions, or enable manual actions, that mitigate accidents or prevent or minimize radioactive releases to the site or wider environment. The functions, and the associated systems and equipment that fulfill these roles safeguard the health and safety of the NPP operators and the public. This standard complements, and does not replace or supersede, the Safety Guides and Codes of Practice published by the International Atomic Energy Agency

  10. Spillover effects of international standards

    DEFF Research Database (Denmark)

    Trifkovic, Neda

    Most studies focus on trade effects and organizational outcomes of international standards, neglecting the effect of standards on employees. Using a two-year matched firm–employee panel dataset, this paper finds that the application of standards improves work conditions in small and medium....... The study reveals unexpected benefits from certification, calling for higher investment in standards....

  11. International hearing protector standardization

    DEFF Research Database (Denmark)

    Poulsen, Torben

    2002-01-01

    Hearing protectors shall fulfill some minimum requirements to their performance. As hearing protector manufacturers sell the products all over the world, the testing and certification of hearing protectors has become an international issue. The ISO working group WG17 under the headlines Acoustics...

  12. 25 CFR 542.15 - What are the minimum internal control standards for credit?

    Science.gov (United States)

    2010-04-01

    ... outside agencies, and other documents related to issued credit instruments shall be maintained. (f) Write... (or another equivalent document) that contains: (i) The same preprinted number on all copies; (ii... balances are routinely confirmed on a random basis by the accounting or internal audit departments, or...

  13. 25 CFR 542.16 - What are the minimum internal control standards for information technology?

    Science.gov (United States)

    2010-04-01

    ... information technology? 542.16 Section 542.16 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE... standards for information technology? Link to an amendment published at 73 FR 60498, Oct. 10, 2008. This... adequately segregated and monitored to prevent error in general information technology procedures to go...

  14. Automatic Generation of Object Models for Process Planning and Control Purposes using an International standard for Information Exchange

    Directory of Open Access Journals (Sweden)

    Petter Falkman

    2003-10-01

    Full Text Available In this paper a formal mapping between static information models and dynamic models is presented. The static information models are given according to an international standard for product, process and resource information exchange, (ISO 10303-214. The dynamic models are described as Discrete Event Systems. The product, process and resource information is automatically converted into product routes and used for simulation, controller synthesis and verification. A high level language, combining Petri nets and process algebra, is presented and used for speci- fication of desired routes. A main implication of the presented method is that it enables the reuse of process information when creating dynamic models for process control. This method also enables simulation and verification to be conducted early in the development chain.

  15. INTERNATIONAL FINANCIAL REPORTING STANDARDS AND ...

    African Journals Online (AJOL)

    PUBLICATIONS1

    across borders led many economies to adopt the. International ... Keywords: Reporting Standards, Value, Relevance, Earnings, Management ..... nal of Applied Economics and Business Re- search ... accounting in emerging markets: Evidence.

  16. Digital forensic standards: international progress

    CSIR Research Space (South Africa)

    Grobler, MM

    2010-05-01

    Full Text Available With the explosion of digital crime, digital forensics is more often applied. The digital forensic discipline developed rather rapidly, but up to date very little international standardization with regard to processes, procedures or management has...

  17. 25 CFR 542.22 - What are the minimum internal control standards for internal audit for Tier A gaming operations?

    Science.gov (United States)

    2010-04-01

    ... sensitive keys, the tracing of source documents to summarized documentation and accounting records, and... source documents to summarized documentation and accounting records, reconciliation to restricted copies... limited to, game write and payout procedures, sensitive key location and control, and a review of keno...

  18. 25 CFR 542.42 - What are the minimum internal control standards for internal audit for Tier C gaming operations?

    Science.gov (United States)

    2010-04-01

    ... drop cabinet access, tracing of source documents to summarized documentation and accounting records...) Keno, including but not limited to, game write and payout procedures, sensitive key location and control, and a review of keno auditing procedures; (v) Pari-mutual wagering, including write and payout...

  19. 25 CFR 542.32 - What are the minimum internal control standards for internal audit for Tier B gaming operations?

    Science.gov (United States)

    2010-04-01

    ... sensitive keys, the tracing of source documents to summarized documentation and accounting records, and... source documents to summarized documentation and accounting records, reconciliation to restricted copies... limited to, game write and payout procedures, sensitive key location and control, and a review of keno...

  20. 25 CFR 542.12 - What are the minimum internal control standards for table games?

    Science.gov (United States)

    2010-04-01

    ... this section, if a gaming operation uses plastic cards (not plastic-coated cards), the cards may be... distribution, use, and control. Personnel from the cashier or pit departments shall have no access to the... cards and dice shall be maintained in a secure location to prevent unauthorized access and to reduce the...

  1. Towards an international address standard

    CSIR Research Space (South Africa)

    Coetzee, S

    2008-02-01

    Full Text Available in a better user experience. Standards compliance allows for the separation of concerns: HTML for content, Cascading Style Sheets (CSS) for presentation and JavaScript for dynamic behaviour. Standards compliant documents are also...) and cascading style sheets through CSS (CSS n.d.), whilst the JavaScript specification has been standardised by Ecma International (another standards organisation for information and communication systems), in the form of EcmaScript (Ecma...

  2. PM10 standards and nontraditional particulate source controls: A summary of the A ampersand WMA/EPA international specialty conference

    International Nuclear Information System (INIS)

    Chow, J.C.; Watson, J.G.; Ono, D.M.; Mathai, C.V.

    1993-01-01

    An international specialty conference, jointly sponsored by the Air ampersand Waste Management Association (A ampersand WMA) and the US Environmental Protection Agency (EPA), entitled open-quotes PM 10 Standards and Nontraditional Particulate Source Controls,close quotes was held in Scottsdale, Arizona, January 12-15, 1992. The conference included 92 presentations in 17 technical sessions. Eight-one peer-reviewed technical papers, two keynote addresses and one panel session summary describing novel applications, measurement processes, modeling techniques and control measures for nontraditional pollution sources are assembled in the Transactions. The technical issues addressed during the conference included: (1) measurement methods and data bases; (2) emissions source characterization; (3) source apportionment of nontraditional sources; (4) fugitive dust characterization and control technologies; (5) vegetative burning characterization and control technologies; (6) sources and controls of secondary aerosol and motor vehicle precursors; and (7) regulatory policies and State Implementation Plan (SIP) development. This paper gives an overview of the technical program. 105 refs., 1 tab

  3. Radiation safety: New international standards

    International Nuclear Information System (INIS)

    Gonzalez, A.J.

    1994-01-01

    This article highlights an important result of this work for the international harmonization of radiation safety: specifically, it present an overview of the forthcoming International Basic Safety Standards for Protection Against Ionizing Radiation and for the Safety of Radiation Sources - the so-called BSS. They have been jointly developed by six organizations - the Food and Agriculture Organization of the United Nations (FAO), the International Atomic Energy Agency (IAEA), the International Labour Organization (ILO), the Nuclear Energy Agency of the Organization for Economic Co-operation and Development (NEA/OECD), the Pan American Health Organization (PAHO), and the World Health Organization (WHO)

  4. Bill Lang's contributions to acoustics at International Business Machines Corporation (IBM), signal processing, international standards, and professionalism in noise control engineering

    Science.gov (United States)

    Maling, George C.

    2005-09-01

    Bill Lang joined IBM in the late 1950s with a mandate from Thomas Watson Jr. himself to establish an acoustics program at IBM. Bill created the facilities in Poughkeepsie, developed the local program, and was the leader in having other IBM locations with development and manufacturing responsibilities construct facilities and hire staff under the Interdivisional Liaison Program. He also directed IBMs acoustics technology program. In the mid-1960s, he led an IEEE standards group in Audio and Electroacoustics, and, with the help of James Cooley, Peter Welch, and others, introduced the fast Fourier transform to the acoustics community. He was the convenor of ISO TC 43 SC1 WG6 that began writing the 3740 series of standards in the 1970s. It was his suggestion to promote professionalism in noise control engineering, and, through meetings with Leo Beranek and others, led the founding of INCE/USA in 1971. He was also a leader of the team that founded International INCE in 1974, and he served as president from 1988 until 1999.

  5. Quantitative monitoring of HCMV DNAlactia in human milk by real time PCR assay: Implementation of internal control contributes to standardization and quality control.

    Science.gov (United States)

    Hartleif, Steffen; Göhring, Katharina; Goelz, Rangmar; Jahn, Gerhard; Hamprecht, Klaus

    2016-11-01

    For cytomegalovirus screening of breastfeeding mothers of preterm infants under risk, we present a rapid, quantitative real-time PCR protocol using the hybridization format of the viral gB target region. For quantification, we used an external gB fragment cloned into a vector system. For standardization, we created an internal control-plasmid by site-directed mutagenesis with an exchange of 9 nucleotides. Spiked with internal control, patient wildtype amplicons could be discriminated from internal controls by hybridization probes using two-channel fluorescence detection. Potential bias of formerly reported false nucleotide sequence data of gB-hybridization probes was excluded. Using this approach, we could demonstrate excellent analytical performance and high reproducibility of HCMV detection during lactation. This assay shows very good correlation with a commercial quantitative HCMV DNA PCR and may help to identify rapidly HCMV shedding mothers of very low birth weight preterm infants to prevent HCMV transmission. On the other hand, negative DNA amplification results allow feeding of milk samples of seropositive mothers to their preterm infants under risk (<30 weeks of gestational age, <1000g birth weight) during the onset and late stage of HCMV shedding during lactation. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. on International Financial Reporting Standards

    Directory of Open Access Journals (Sweden)

    Edyta Łazarowicz

    2016-07-01

    Full Text Available The article analyses and assesses proposals for changes concerning the objective of financial reportingbased on International Financial Reporting Standards (IFRS, presented in comments on the exposuredraft of the Conceptual Framework for Financial Reporting (2015. The majority of respondents thinkthat the objective of financial reporting should give more prominence to the importance of providinginformation about management’s stewardship. Moreover, some respondents suggest introducing thedefinition of stewardship into the Conceptual Framework and presenting implications of shifts in theobjective of financial reporting for the future standard setting and for preparing financial statements.Based on the analysis of comment letters and the review of accounting literature, the conclusion is thatthe objective of financial reporting should be changed. It is, however, disputable, if stewardship should bea separate object. There is too little research on the relation between the stewardship and decisionusefulnessobjectives. The findings of this research could show accounting standard-setters the potentialtrade-offs and conflicts between these objectives.

  7. International Organization for Standardization (ISO) 15189.

    Science.gov (United States)

    Schneider, Frank; Maurer, Caroline; Friedberg, Richard C

    2017-09-01

    The College of American Pathologists (CAP) offers a suite of laboratory accreditation programs, including one specific to accreditation to the international organization for standardization (ISO) 15189 standard for quality management specific to medical laboratories. CAP leaders offer an overview of ISO 15189 including its components, internal audits, occurrence management, document control, and risk management. The authors provide a comparison of its own ISO 15189 program, CAP 15189, to the CAP Laboratory Accreditation Program. The authors conclude with why laboratories should use ISO 15189. © The Korean Society for Laboratory Medicine.

  8. Control Techtronics International

    Energy Technology Data Exchange (ETDEWEB)

    West, J.

    1995-12-31

    Polish graded coal can be burned in existing stoker boilers and meet the 1998 Air Quality standard. This is accomplished with the Control Techtronics microprocessor-based combustion controller accurately and repeatedly: (a) matching the combustion air to the coal firing rate, with continuous stack sensor feedback; (b) continuously varying the boiler`s firing rate based on output water temperature or steam pressure; (c) continuously varying the exhaust fan`s speed to maintain minimum negative pressure in the boiler`s combustion chamber; and recirculating a portion of the flue gas, at varying amounts throughout the boiler`s firing rate. Systems for five boilers have been installed and are operating on MPEC`s Balicka plant in Krakow. Control Techtronics International has $10 million of U.S. Export-Import Bank funds available for similar projects throughout Poland.

  9. Internal Control: Peran Dan Perkembangannya

    OpenAIRE

    Murtin, Alek

    2000-01-01

    Perhatian terhadap pentingnya internal control dalam organisasi berjalan dari waktu ke waktu untuk meningkatkan fungsi internal control yang disesuaikan dengan perkembangan lingkungan organisasi, dimulai dengan adanya internal check, kemudian internal control system, internal control structure dan terakhir adalah internal control-integrated framework. Internal control system sempat berkembang beberapa tahun di Indonesia yang selanjutnya digantikan oleh internal control structure yang digunaka...

  10. The international dimensions of nuclear safety standards

    International Nuclear Information System (INIS)

    Reed, J.M.

    1992-01-01

    The paper reviews the activities of the major international organisations in the field of nuclear safety standards; the International Atomic Energy Agency (IAEA), the OECD's Nuclear Energy Agency (NEA) and the Commission of the European Communities. Each organisation encourages the concept of international nuclear safety standards. After Chernobyl, there were calls for some form of binding international nuclear safety standards. Many Member States of IAEA accepted these Codes as a suitable basis for formulating their national safety standards, but the prevailing view was that voluntary compliance with the Codes was the preferred path. With few reactor vendors in a limited international market, the time may be approaching when an internationally licensable nuclear reactor is needed. Commonly accepted safety standards would be a prerequisite. The paper discusses the issues involved and the complexities of standards making in the international arena. (author)

  11. Supplementary control points for reactor shutdown without access to the main control room (International Electrotechnical Commission Standard Publication 965:1989)

    International Nuclear Information System (INIS)

    Kubalek, J.; Hajek, B.

    1993-01-01

    This standard establishes the requirements for supplementary Control Points provided to enable the operating staff to shut down the reactor and maintain the plant in a safe shut-down condition when the main control room is no longer available. This standard covers the functional selection, design and organization of the man/machine interface. It also establishes requirements for procedures which systematically verify and validate the functional design of supplementary control points. The requirements reflect the application of human engineering principles as they apply to man/machine interface. This standard does not cover special emergency response centres (e.g. a Technical Support Centre). It also does not include the detailed equipment design. Unavailability of the main control room controls due to intentionally man-induced events is not considered

  12. DOE standard: Radiological control

    Energy Technology Data Exchange (ETDEWEB)

    1999-07-01

    The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ``Occupational Radiation Protection``. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835.

  13. DOE standard: Radiological control

    International Nuclear Information System (INIS)

    1999-07-01

    The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ''Occupational Radiation Protection''. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835

  14. International Financial Reporting Standards and differential reporting

    OpenAIRE

    Jarvis, Robin; Collis, Jill

    2003-01-01

    This paper examines the international development of financial reporting standards for smaller entities from a UK perspective. It examines the three elements of differential reporting: abbreviated accounts, the Financial Reporting Standard for Smaller Entities and exemption from the statutory audit.

  15. EVALUATION OF DIFFERENT INTERNAL STANDARDS FOR ...

    African Journals Online (AJOL)

    internal standard addition method was evaluated with the variation in solution ... background emissions involved in generating accurate and reliable .... The most suitable atomic and ionic wavelengths (λ) for the internal standards and precious ..... spectral interferences occur and using validation parameters is currently ...

  16. The political economy of international accounting standards

    NARCIS (Netherlands)

    Perry, J.; Nolke, A.

    2006-01-01

    On 1 January 2005, all stock exchange listed companies in the European Union (EU) began using International Financial Reporting Standards (IFRS) written by the International Accounting Standards Board (IASB). This article argues that the IASB's introduction of fair value accounting reflects and

  17. INTERNATIONAL FINANCIAL REPORTING STANDARDS AND ...

    African Journals Online (AJOL)

    PUBLICATIONS1

    (IFRS) on the quality of financial reporting in Nigeria. The study utilises a ... cial reporting by public interest entities world- wide. In Nigeria ... Keywords: Reporting Standards, Value, Relevance, Earnings, Management ... of the. IFRS, the adoption is wrought with challenges. ... and transitional economies still have ineffective.

  18. The International harmonisation process of Accounting Standards

    OpenAIRE

    Fritz, Susanne; Lämmle, Christina

    2003-01-01

    Background: Growth in international trade and capital flows has triggered a rising economic integration. Because of these developments there has been an international homogenising effect upon many customs, practices and institutions. In business life it led among other things to a desire to harmonise Accounting Standards among countries. Purpose: Our purpose is to answer the question: What is the international harmonisation process of Accounting Standards, what is its status quo and how impo...

  19. Importance of international standards on hydrogen technologies

    International Nuclear Information System (INIS)

    Bose, T.K.; Gingras, S.

    2001-01-01

    This presentation provided some basic information regarding standards and the International Organization for Standardization (ISO). It also explained the importance of standardization activities, particularly ISO/TC 197 which applies to hydrogen technologies. Standards are established by consensus. They define the minimum requirements that will ensure that products and services are reliable and effective. Standards contribute to the elimination of technical barriers to trade (TBT). The harmonization of standards around the world is desirable in a free trade environment. The influence of the TBT on international standardization was discussed with particular reference to the objectives of ISO/TC 197 hydrogen technologies. One of the priorities for ISO/TC 197 is a hydrogen fuel infrastructure which includes refuelling stations, fuelling connectors, and storage technologies for gaseous and liquid hydrogen. Other priorities include an agreement between the International Electrotechnical Commission (IEC) and the ISO, in particular the IEC/TC 105 and ISO/TC 197 for the development of fuel cell standards. The international standards that have been published thus far include ISO 13984:1999 for liquid hydrogen, land vehicle fuelling system interface, and ISO 14687:1999 for hydrogen fuel product specification. Standards are currently under development for: liquid hydrogen; airport hydrogen fuelling facilities; gaseous hydrogen blends; basic considerations for the safety of hydrogen systems; gaseous hydrogen and hydrogen blends; and gaseous hydrogen for land vehicle filling connectors. It was concluded that the widespread use of hydrogen is dependent on international standardization

  20. Observations on International Labor Standards and Trade

    OpenAIRE

    Alan B. Krueger

    1996-01-01

    This paper reviews the theoretical arguments for and against linking international labor standards to trade. Based on theory alone it is difficult to generalize about the effect of labor standards on efficiency and equity. Some economists have argued that international labor standards are merely disguised protectionism. An evaluation of determinants of support for legislation that would ban imports to the United States of goods made with child labor provides little support for the prevailing ...

  1. International standardization in the field of environment

    International Nuclear Information System (INIS)

    Lehmann, K.

    1991-01-01

    The ISO (International Organization for Standardization) is an international federation of national standards bodies. Its activities increasingly take health and environmental effects into account; in the future, standardization will also focus on identification systems that could facilitate recycling and proper disposal. Three technical committees in particular are concerned with standardization as it relates to air, water and soil quality. Other ISO work concerns product-oriented standardization, e.g. in the fields of fire protection equipment, refrigeration, thermal insulation, fibre-reinforced cement, and material and equipment used in the petroleum and natural gas industries. (author)

  2. Internal Control Organization Procedure

    OpenAIRE

    Radu Dorin Lenghel

    2013-01-01

    Internal control represents the totality of policies and procedures adopted by management, which contribute: to the fulfilment of managerial objectives, to the prevention and detection of frauds or errors, to the accuracy and exhaustiveness of accounting entries, as well as to the preparation in due course of financial accounting information. Internal control represents a managerial instrument which assures the fulfilment of objectives of the entity, being an ongoing process in which administ...

  3. Fiscal 1997 report on the results of the international standardization R and D. Robot control system; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Robot seigyo system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    R and D of the robot control system was conducted in the following items: 1) integrated open control system, 2) remote control robot manipulation language, 3) human factor robot use built-in LAN system, 4) built-in actuator driver. In 1), there were some problems to be pointed out around the system, but the effectiveness was confirmed as system architecture of each verification item. In 2), development/design were made of RCML(R-Cube Manipulation Language) as a remote robot manipulation language, telecommunication protocol, and the experimental system, and the international standardization was targeted. In 3), the R and D was conducted of the realtime telecommunication protocol which clears the standards for the distributed control required for construction of human factor robot and the advanced realtime micro-controller, ULSI, which is the one that the protocol was made IC. In 4), an intelligent connector for built-in actuator was developed which enables saving of wiring in robot system and plug-in connection. 13 refs., 186 figs., 53 tabs.

  4. Anthropometric standardisation and quality control protocols for the construction of new, international, fetal and newborn growth standards: the INTERGROWTH-21st Project.

    Science.gov (United States)

    Cheikh Ismail, L; Knight, H E; Ohuma, E O; Hoch, L; Chumlea, W C

    2013-09-01

    The primary aim of the INTERGROWTH-21(st) Project is to construct new, prescriptive standards describing optimal fetal and preterm postnatal growth. The anthropometric measurements include the head circumference, recumbent length and weight of the infants, and the stature and weight of the parents. In such a large, international, multicentre project, it is critical that all study sites follow standardised protocols to ensure maximal validity of the growth and nutrition indicators used. This paper describes in detail the anthropometric training, standardisation and quality control procedures used to collect data for these new standards. The initial standardisation session was in Nairobi, Kenya, using newborns, which was followed by similar sessions in the eight participating study sites in Brazil, China, India, Italy, Kenya, Oman, UK and USA. The intraobserver and inter-observer technical error of measurement values for head circumference range from 0.3 to 0.4 cm, and for recumbent length from 0.3 to 0.5 cm. These standardisation protocols implemented at each study site worldwide ensure that the anthropometric data collected are of the highest quality to construct international growth standards. © 2013 Royal College of Obstetricians and Gynaecologists.

  5. Upgrading Temelin to international standards

    International Nuclear Information System (INIS)

    Anderson, J.J.; Gisoni, G.A.; Stormer, T.D.

    1994-01-01

    The digital technology being installed to upgrade the Instrumentation and Control system at the Temelin twin VVER-1000 station in the Czech Republic will allow the plant to operate more safely because it allows key information to be organised and presented to the operators, enabling them to make better informed decisions about the status of the plant. The new system is based on proven technology previously applied at Beznau in Switzerland and Sizewell B in the UK. (author)

  6. China and IEC international standardization activities

    Institute of Scientific and Technical Information of China (English)

    Su Zhongmin; Guo Chenguang

    2006-01-01

    @@ International Electrotechnical Commission (IEC), one of the currently worlswide largest and most authoritative international standardization organizations,is specialized in developing and promulgating international standards for the electric and electronic fields, which are widespread adopted through out the world and play an important role in the international trade of electric and electronic products. Moreover, according to the 2005 statistics by the World Bank, the population of countries participating in the IEC activities accounts for 92% of the world total and their trade volume accounts for 95% of the global total.

  7. Internal budget control

    Directory of Open Access Journals (Sweden)

    MSc. Mervete Shala

    2011-06-01

    Generally, duties of internal control officers within ministries and institutions must be clearly divided to reduce the risk of inco-rrect behaviour. Operations of an efficient control mechanism influence and ensure conditions for rule of law, good governance, and democracy.

  8. Radiological Control Technician: Standardized technician Qualification Standard

    International Nuclear Information System (INIS)

    1992-10-01

    The Qualification Standard states and defines the knowledge and skill requirements necessary for successful completion of the Radiological Control Technician Training Program. The standard is divided into three phases: Phase I concerns RCT Academic training. There are 13 lessons associated with the core academics program and 19 lessons associated with the site academics program. The staff member should sign the appropriate blocks upon successful completion of the examination for that lesson or group of lessons. In addition, facility specific lesson plans may be added to meet the knowledge requirements in the Job Performance Measures (JPM) of the practical program. Phase II concerns RCT core/site practical (JPMs) training. There are thirteen generic tasks associated with the core practical program. Both the trainer/evaluator and student should sign the appropriate block upon successful completion of the JPM. In addition, facility specific tasks may be added or generic tasks deleted based on the results of the facility job evaluation. Phase III concerns the oral examination board successful completion of the oral examination board is documented by the signature of the chairperson of the board. Upon completion of all of the standardized technician qualification requirements, final qualification is verified by the student and the manager of the Radiological Control Department and acknowledged by signatures on the qualification standard. The completed Qualification Standard shall be maintained as an official training record

  9. Internal budget control

    OpenAIRE

    MSc. Mervete Shala

    2011-01-01

    Internal control is established by the Government to ensure effective and proper operations of ministries, institutions and generally of all public agencies, in compliance with the law, the goals and objectives stated by them, to provide protection against abuse and mismanagement or poor governance. The instrument of internal audit entails a series of mechanisms which aim at enabling budgetary policies compliance, such as: financial reporting; effective system of communication between mana...

  10. International Standardization of Library and Documentation Techniques.

    Science.gov (United States)

    International Federation for Documentation, The Hague (Netherlands).

    This comparative study of the national and international standards, rules and regulations on library and documentation techniques adopted in various countries was conducted as a preliminary step in determining the minimal bases for facilitating national and international cooperation between documentalists and librarians. The study compares and…

  11. Standards: An international framework for nuclear safety

    International Nuclear Information System (INIS)

    Versteeg, J.

    2000-01-01

    The IAEA, uniquely among international organizations concerned with the use of radiation, radioactive materials and nuclear energy, has statutory functions to establish safety standards and to provide for their application in Member States. The IAEA also contributes towards another major element of the 'global safety culture', namely the establishment of legally binding international agreements on safety related issues. (author)

  12. Adoption of International Financial Accounting Reporting Standards ...

    African Journals Online (AJOL)

    This study examines the International Financial Accounting Reporting Standards adoption practices around the world and the way these practices are reflected in the financial statements of companies in different countries. It also examines the incentives/ motivations for the variations in the type of International Financial ...

  13. International standards and agreements in food irradiation

    International Nuclear Information System (INIS)

    Cetinkaya, N.

    2004-01-01

    Full text: The economies of both developed and developing countries have been effected by their exported food and agricultural products. Trading policies of food and agricultural products are governed by international agreement as well as national regulations. Trade in food and agricultural commodities may be affected by both principal Agreements within the overall World Trade Organization (WTO) Agreement, though neither specifically refers to irradiation or irradiated foods. The principal Agreements are the Technical Barriers to Trade (TBT) Agreement and the Sanitary and Phyto sanitary (SPS) Agreement. The SPS of the WTO requires governments to harmonize their sanitary and phyto sanitary measures on as wide basis as possible. Related standards, guidelines and recommendations of international standard setting bodies such as the Codex Alimentarius Commission (food safety); the International Plant Protection Convention (IPPC) (plant health and quarantine); and International Office of Epizootic (animal health and zoo noses) should be used in such a harmonization. International Standards for Phyto sanitary Measures (ISPM) no.18 was published under the IPPC by FAO (April 2003, Rome-Italy). ISPM standard provides technical guidance on the specific procedure for the application of ionizing radiation as a phyto sanitary treatment for regulated pests or articles. Moreover, Codex Alimentarius Commission, Codex General Standard for Irradiated Foods (Stand 106-1983) and Recommended International Code of Practice were first published in 1983 and revised in March 2003. Scope of this standard applies to foods processed by ionizing radiation that is used in conjunction with applicable hygienic codes, food standards and transportation codes. It does not apply to foods exposed to doses imparted by measuring instruments used for inspection purposes. Codex documents on Principles and Guidelines for the Import/Export Inspection and Certification of Foods have been prepared to guide

  14. International standards and agreements in food irradiation

    International Nuclear Information System (INIS)

    Cetinkaya, N.

    2004-01-01

    The economies of both developed and developing countries have been effected by their exported food and agricultural products. Trading policies of food and agricultural products are governed by international agreement as well as national regulations. Trade in food and agricultural commodities may be affected by both principal Agreements within the overall World Trade Organization (WTO) Agreement, though neither specifically refers to irradiation or irradiated foods. The principal Agreements are the Technical Barriers to Trade (TBT) Agreement and the Sanitary and Phyto sanitary (SPS) Agreement. The SPS of the WTO requires governments to harmonize their sanitary and phyto sanitary measures on as wide basis as possible. Related standards, guidelines and recommendations of international standard setting bodies such as the Codex Alimentarius Commission (food safety); the International Plant Protection Convention (IPPC) (plant health and quarantine); and International Office of Epizootic (animal health and zoo noses) should be used in such a harmonization. International Standards for Phyto sanitary Measures (ISPM) no.18 was published under the IPPC by FAO (April 2003, Rome-Italy). ISPM standard provides technical guidance on the specific procedure for the application of ionizing radiation as a phyto sanitary treatment for regulated pests or articles. Moreover, Codex Alimentarius Commission, Codex General Standard for Irradiated Foods (Stand 106-1983) and Recommended International Code of Practice were first published in 1983 and revised in March 2003. Scope of this standard applies to foods processed by ionizing radiation that is used in conjunction with applicable hygienic codes, food standards and transportation codes. It does not apply to foods exposed to doses imparted by measuring instruments used for inspection purposes. Codex documents on Principles and Guidelines for the Import/Export Inspection and Certification of Foods have been prepared to guide international

  15. International standards in mitigating trade risks.

    Science.gov (United States)

    Thiermann, A B

    2011-04-01

    This paper describes the role of the World Organisation for Animal Health (OIE), as a science-based and democratic standard-setting organisation that provides guidance on preventing the spread of animal diseases, including zoonoses, in international trade. The World Trade Organization is identified as the international institution with the legal power to encourage adherence to international standards and mediate trade disputes. The importance of assuring good governance and the credibility of national Veterinary Services through a process of official certification is identified as an essential component in the safety of trade. Private-public partnerships and the evolution of responsibilities are also identified as essential for the implementation of health guarantees such as compartmentalisation. The rapid emergence of private standards is described as a potential complement to the implementation of sanitary standards, as long as they are applied globally and in support of the OIE standards. Ultimately, the biggest challenge is for the international community to create the incentives and generate the political will for fair trade and for the universal recognition and application of the established international sanitary standards.

  16. Internal emitter research and standard setting

    International Nuclear Information System (INIS)

    Stannard, J.N.

    1981-01-01

    The history of the use of data from internal emitter research in the derivation of safety standards is reviewed. At first, observed biological effects were correlated with body burdens or exposure levels. This direct approach is illustrated by detailed accounts of the cases of uranium and plutonium. In the 1950's, when it was decided to provide standards for over 200 isotopes, the direct approach was replaced by a system of calculations. This necessitated changes in internal emitter research programs to provide metabolic data, and the development of models such as Reference Man and the Lung and Gastrointestinal Tract models. The continuing contribution of internal emitter research to standard setting can be seen in the references quoted in the metabolic data section of the new ICRP report (ICRP Publication 30). Present trends suggest a possible return to the direct use of internal emitter effects data for obtaining risk estimates. (U.K.)

  17. Internal control system

    OpenAIRE

    Pavésková, Ivana

    2014-01-01

    Dissertation focuse on the internal control system in the enterprises, aims to map the control system by focusing on the purchasing department. I focused on the purchasing process, because with an increasing trends of outsourcing services and the increasing interconnectedness of enterprises increases the risk of fraud currently in the purchasing process. To the research was selected the sample of companies from the banking and non-banking environment, to which were sent a questionnaire focusi...

  18. International developments. Research and standardization; Internationale Entwicklungen. Forschung und Standardisierung

    Energy Technology Data Exchange (ETDEWEB)

    Breustedt, Bastian [Karlsruher Institut fuer Technologie (KIT), Eggenstein-Leopoldshafen (Germany). Inst. fuer Strahlenforschung

    2017-08-01

    The methods and models for the determination of incorporated doses are developed and published by the international radiation protection commission ICRP. The ICRP recommendations were adopted into the international basic safety standards of IAEA and the European Commission The implementation of the safety standards into the national radiation protection regulations yield the legal basis for incorporation surveillance. In Germany this is the Strahlenschutzverordnung and the guideline for the physical radiation protection control for the determination of body doses.

  19. Radiation control standards and procedures

    Energy Technology Data Exchange (ETDEWEB)

    1956-12-14

    This manual contains the Radiation Control Standards'' and Radiation Control Procedures'' at Hanford Operations which have been established to provide the necessary control radiation exposures within Irradiation Processing Department. Provision is also made for including, in the form of Bulletins'', other radiological information of general interest to IPD personnel. The purpose of the standards is to establish firm radiological limits within which the Irradiation Processing Department will operate, and to outline our radiation control program in sufficient detail to insure uniform and consistent application throughout all IPD facilities. Radiation Control Procedures are intended to prescribe the best method of accomplishing an objective within the limitations of the Radiation Control Standards. A procedure may be changed at any time provided the suggested changes is generally agreeable to management involved, and is consistent with department policies and the Radiation Control Standards.

  20. Minimum quality standards and international trade

    DEFF Research Database (Denmark)

    Baltzer, Kenneth Thomas

    2011-01-01

    This paper investigates the impact of a non-discriminating minimum quality standard (MQS) on trade and welfare when the market is characterized by imperfect competition and asymmetric information. A simple partial equilibrium model of an international Cournot duopoly is presented in which a domes...... prefer different levels of regulation. As a result, international trade disputes are likely to arise even when regulation is non-discriminating....

  1. The CMMI Product Suite and International Standards

    Science.gov (United States)

    2006-07-01

    standards: “2.3 Reference Documents 2.3.1 Applicable ISO /IEC documents, including ISO /IEC 12207 and ISO /IEC 15504.” “3.1 Development User Requirements...related international standards such as ISO 9001:2000, 12207 , 15288 © 2006 by Carnegie Mellon University Page 12 Key Supplements Needed...the Measurement Framework in ISO /IEC 15504; and • the Process Reference Model included in ISO /IEC 12207 . A possible approach has been developed for

  2. Internal dosimetry and control

    International Nuclear Information System (INIS)

    Rich, B.L.

    1990-05-01

    This internal dosimetry and control report provides guidance for EG ampersand G Idaho, Inc., field programs in detecting, evaluating, and controlling personnel exposure resulting from uptake of radionuclides by the body. Procedures specific to each program or facility are required to define the details of guidance from this report. Fundamental principles related to philosophy, policies, monitoring guidelines, and dose evaluation are discussed. Specific numerical guides and action levels are developed to guide the programs in evaluating the significance of specific analytical results. The requirement to thoroughly document the results and provide a formal technical base for each policy and/or practice is outlined and explained. 8 refs., 3 figs., 7 tabs

  3. 78 FR 18321 - International Code Council: The Update Process for the International Codes and Standards

    Science.gov (United States)

    2013-03-26

    ... Energy Conservation Code. International Existing Building Code. International Fire Code. International... Code. International Property Maintenance Code. International Residential Code. International Swimming Pool and Spa Code International Wildland-Urban Interface Code. International Zoning Code. ICC Standards...

  4. ISO: international standards development for nuclear technology

    International Nuclear Information System (INIS)

    Becker, K.

    1981-01-01

    The importance of internationally recognized standards for nuclear technology and safety is rapidly increasing for technical as well as economical and political reasons such as public acceptance and nuclear technology transfer to developing countries. The need for such standards is also evident because of the large number of nuclear installations sited close to international borders, and the export of nuclear installations from relatively few supplier countries to a large number of user countries. It is the purpose of this report to describe briefly the history, organizational structures and procedures, goals, accomplishments, problems, and future needs of the relevant activities of the International Organization for Standardization (ISO). ISO is composed of the partly governmental, partly non-governmental national standards bodies of 86 countries including China. The work of its Technical Committee (TC) 85 'Nuclear Energy' is mostly concerned with industrial applications, contractual aspects and international communication, for the benefit of both developed and developing countries. It works in close liaison with IAEA, which develops Codes and Guides addressed mainly to the regulatory aspects of nuclear power plants in developing countries. ISO/TC 85 has four sub-committees dealing with: (a) Terminology, Definitions, Units and Symbols (Secretariat USA, four working groups (WGs)); (b) Radiation Protection (Secretariat France, ten WGs); (c) Power Reactor Technology (Secretariat Sweden, nine WGs); (d) Nuclear Fuel Technology (Secretariat F.R. Germany, seven WGs). (author)

  5. Data standards for the international virtual observatory

    Directory of Open Access Journals (Sweden)

    R J Hanisch

    2006-11-01

    Full Text Available A primary goal of the International Virtual Observatory Alliance, which brings together Virtual Observatory Projects from 16 national and international development projects, is to develop, evaluate, test, and agree upon standards for astronomical data formatting, data discovery, and data delivery. In the three years that the IVOA has been in existence, substantial progress has been made on standards for tabular data, imaging data, spectroscopic data, and large-scale databases and on managing the metadata that describe data collections and data access services. In this paper, I describe how the IVOA operates and give my views as to why such a broadly based international collaboration has been able to make such rapid progress.

  6. Argue internal audit on how to promote the nuclear power enterprise internal control

    International Nuclear Information System (INIS)

    Li Xiaoming

    2012-01-01

    In order to strengthen and standardize enterprise internal control, improve the management level and risk prevention ability, five departments jointly established the basic rules of internal control in enterprises, large and medium-sized enterprises as the national power enterprise, the enterprise internal audit executive power in strengthening and perfecting internal control, and in the enterprise internal control of play an active role. (author)

  7. Control system architecture: The standard and non-standard models

    International Nuclear Information System (INIS)

    Thuot, M.E.; Dalesio, L.R.

    1993-01-01

    Control system architecture development has followed the advances in computer technology through mainframes to minicomputers to micros and workstations. This technology advance and increasingly challenging accelerator data acquisition and automation requirements have driven control system architecture development. In summarizing the progress of control system architecture at the last International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS) B. Kuiper asserted that the system architecture issue was resolved and presented a ''standard model''. The ''standard model'' consists of a local area network (Ethernet or FDDI) providing communication between front end microcomputers, connected to the accelerator, and workstations, providing the operator interface and computational support. Although this model represents many present designs, there are exceptions including reflected memory and hierarchical architectures driven by requirements for widely dispersed, large channel count or tightly coupled systems. This paper describes the performance characteristics and features of the ''standard model'' to determine if the requirements of ''non-standard'' architectures can be met. Several possible extensions to the ''standard model'' are suggested including software as well as the hardware architectural feature

  8. International Financial Reporting Standards for SMEs

    Directory of Open Access Journals (Sweden)

    Cicilia IONESCU

    2011-06-01

    Full Text Available • IFRS for SMEs give the response to an international requirement of the developed and emerging economies in the process of globalization to have a rigorous and common set of international accounting provisions (standard, rule, regulation specifically for SMEs, to be much more simplified than the complete IFRSs. The area where are applicable the IFRS for SMEs includes all the profit-oriented entities that prepare the general financial statements and do not have the public accountability and there are excluded the entities whose securities are publicly traded and the financial institutions like banks and the insurance companies.

  9. Standardization of detector control systems

    International Nuclear Information System (INIS)

    Fukunaga, Chikara

    2000-01-01

    Current and future detectors for high-energy and/or nuclear physics experiments require highly intelligent detector control systems. In order to reduce resources, the construction of a standardized template for the control systems based on the commercially available superviser control and data acquisition (SCADA) system has been proposed. The possibility of constructing this template is discussed and several key issues for evaluation of SCADA as the basis for such a template are presented. (author)

  10. International control of nuclear materials

    International Nuclear Information System (INIS)

    Koponen, Hannu

    1989-01-01

    Nuclear materials are subject to both national and international safeguards control. The International Atomic Energy Agency (IAEA) takes care of the international safeguards control. The control activities, which are discussed in this article, are carried out according to the agreements between various countries and the IAEA

  11. Control system architecture: The standard and non-standard models

    International Nuclear Information System (INIS)

    Thuot, M.E.; Dalesio, L.R.

    1993-01-01

    Control system architecture development has followed the advances in computer technology through mainframes to minicomputers to micros and workstations. This technology advance and increasingly challenging accelerator data acquisition and automation requirements have driven control system architecture development. In summarizing the progress of control system architecture at the last International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS) B. Kuiper asserted that the system architecture issue was resolved and presented a open-quotes standard modelclose quotes. The open-quotes standard modelclose quotes consists of a local area network (Ethernet or FDDI) providing communication between front end microcomputers, connected to the accelerator, and workstations, providing the operator interface and computational support. Although this model represents many present designs, there are exceptions including reflected memory and hierarchical architectures driven by requirements for widely dispersed, large channel count or tightly coupled systems. This paper describes the performance characteristics and features of the open-quotes standard modelclose quotes to determine if the requirements of open-quotes non-standardclose quotes architectures can be met. Several possible extensions to the open-quotes standard modelclose quotes are suggested including software as well as the hardware architectural features

  12. Study of International Standards of Risk Management

    Directory of Open Access Journals (Sweden)

    Dykan Volodymyr L.

    2014-01-01

    Full Text Available The goal of the article lies in the study of existing international standards of risk management, an important factor of improvement of risk management in domestic corporations and enterprises and development of recommendations on application of international standards in Ukraine, in particular, within the framework of building corporate systems of risk management. The conducted study shows that approaches on organisation of the process of risk management, used in standards of risk management, are of general character and differ with the degree of detailing. Their undoubted value in development of risk management in Ukraine is identification of a general direction of building corporate systems of risk management in practice. The said approaches at the national and corporate levels of standardisation in Ukraine within the framework of building corporate systems of risk management would allow improvement of risk management in corporations and enterprises. The prospect of further studies of domestic specialists in the field of risk management is development of the domestic standard of risk management with consideration of modern domestic specific features of development of risk management in Ukraine and leading foreign experience.

  13. Problems with the implementation of international standards for financial reporting and international audit standards

    OpenAIRE

    Dimitrova, Janka

    2012-01-01

    The International Financial Reporting Standards (IFRS) are designed for application in the financial reports with general purpose and the other financial reporting in all profit-oriented entities. The International Auditing Standards (IAS) are setting out the framework for carrying out the review process of financial reporting from entities referred to audit in order to verify the authenticity of the information and raising up the credibility of financial statements. Quality implementation...

  14. A Metadata Standard for Hydroinformatic Data Conforming to International Standards

    Science.gov (United States)

    Notay, Vikram; Carstens, Georg; Lehfeldt, Rainer

    2017-04-01

    The affordable availability of computing power and digital storage has been a boon for the scientific community. The hydroinformatics community has also benefitted from the so-called digital revolution, which has enabled the tackling of more and more complex physical phenomena using hydroinformatic models, instruments, sensors, etc. With models getting more and more complex, computational domains getting larger and the resolution of computational grids and measurement data getting finer, a large amount of data is generated and consumed in any hydroinformatics related project. The ubiquitous availability of internet also contributes to this phenomenon with data being collected through sensor networks connected to telecommunications networks and the internet long before the term Internet of Things existed. Although generally good, this exponential increase in the number of available datasets gives rise to the need to describe this data in a standardised way to not only be able to get a quick overview about the data but to also facilitate interoperability of data from different sources. The Federal Waterways Engineering and Research Institute (BAW) is a federal authority of the German Federal Ministry of Transport and Digital Infrastructure. BAW acts as a consultant for the safe and efficient operation of the German waterways. As part of its consultation role, BAW operates a number of physical and numerical models for sections of inland and marine waterways. In order to uniformly describe the data produced and consumed by these models throughout BAW and to ensure interoperability with other federal and state institutes on the one hand and with EU countries on the other, a metadata profile for hydroinformatic data has been developed at BAW. The metadata profile is composed in its entirety using the ISO 19115 international standard for metadata related to geographic information. Due to the widespread use of the ISO 19115 standard in the existing geodata infrastructure

  15. EPR meeting international safety standards with margin

    International Nuclear Information System (INIS)

    Mazurkiewicz, S.M.; Brauns, J.; Blombach, J.

    2005-01-01

    The EPR provides technology that offers a solution to the market's need for safe, economic power. The EPR was originally developed through a joint effort between Framatome ANP and Siemens by incorporating the best technological features from the French and German nuclear reactor fleets into a cost-competitive product capable of international licensing. As such, the EPR is a global product with commercial units currently being built in Finland at the Olkiluoto site, and planned for France, at the Flamanville site. Framatome ANP has recently proposed four EPR units to China in response to a request for vendor bids. In addition, Framatome ANP has announced their intent to pursue design certification with the United States Nuclear Regulatory Commission (NRC). This paper discusses how EPR's innovative safety philosophy ensures compliance with international safety standards for advanced light-water reactors (ALWRs). (author)

  16. EPR meeting international safety standards with margin

    International Nuclear Information System (INIS)

    Mazurkiewicz, S.M.; Brauns, J.; Blombach, J.

    2005-01-01

    The EPR provides technology that offers a solution to the market's need for safe, economic power. The EPR was originally developed through a joint effort between Framatome ANP and Siemens by incorporating the best technological features from the French and German nuclear reactor fleets into a cost-competitive product capable of international licensing. As such, the EPR is a global product with commercial units currently being built in Finland at the Olkiluoto site, and planned for France, at the Flamanville site. Framatome ANP has recently proposed four EPR units to China in response to a request for vendor bids. In addition, Framatome ANP has announced their intent to pursue design certification in with the United States Nuclear Regulatory Commission (NRC). This paper discusses how EPR's innovative safety philosophy ensures compliance with international safety standards for advanced light-water reactors (ALWRs). (author)

  17. CONVERGENCE OF INTERNATIONAL AUDIT STANDARDS AND AMERICAN AUDIT STANDARDS REGARDING SAMPLING

    Directory of Open Access Journals (Sweden)

    Chis Anca Oana

    2013-07-01

    Full Text Available Abstract: Sampling is widely used in market research, scientific analysis, market analysis, opinion polls and not least in the financial statement audit. We wonder what is actually sampling and how did it appear? Audit sampling involves the application of audit procedures to less than 100% of items within an account balance or class of transactions. Nowadays the technique is indispensable, the economic entities operating with sophisticated computer systems and large amounts of data. Economic globalization and complexity of capital markets has made possible not only the harmonization of international accounting standards with the national ones, but also the convergence of international accounting and auditing standards with the American regulations. International Standard on Auditing 530 and Statement on Auditing Standard 39 are the two main international and American normalized referentials referring to audit sampling. This article discusses the origin of audit sampling, mentioning a brief history of the method and different definitions from literature review. The two standards are studied using Jaccard indicators in terms of the degree of similarity and dissimilarity concerning different issues. The Jaccard coefficient measures the degree of convergence of international auditing standards (ISA 530 and U.S. auditing standards (SAS 39. International auditing standards and American auditing standards, study the sampling problem, both regulations presenting common points with regard to accepted sampling techniques, factors influencing the audit sample, treatment of identified misstatements and the circumstances in which sampling is appropriate. The study shows that both standards agree on application of statistical and non-statistical sampling in auditing, that sampling is appropriate for tests of details and controls, the factors affecting audit sampling being audit risk, audit objectives and population\\'s characteristics.

  18. PROWAY - a standard for distributed control systems

    International Nuclear Information System (INIS)

    Gellie, R.W.

    1980-01-01

    The availability of cheap and powerful microcomputer and data communications equipment has led to a major revision of instrumentation and control systems. Intelligent devices can now be used and distributed about the control system in a systematic and economic manner. These sub-units are linked by a communications system to provide a total system capable of meeting the required plant objectives. PROWAY, an international standard process data highway for interconnecting processing units in distributed industrial process control systems, is currently being developed. This paper describes the salient features and current status of the PROWAY effort. (auth)

  19. International Standards on stability of digital prints

    International Nuclear Information System (INIS)

    Adelstein, Peter Z

    2010-01-01

    The International Standards Organization (ISO) is a worldwide recognized standardizing body which has responsibility for standards on permanence of digital prints. This paper is an update on the progress made to date by ISO in writing test methods in this area. Three technologies are involved, namely ink jet, dye diffusion thermal transfer (dye-sublimation) and electrophotography. Two types of test methods are possible, namely comparative tests and predictive tests. To date a comparative test on water fastness has been published and final balloting is underway on a comparative test on humidity fastness. Predictive tests are being finalized on thermal stability and pollution susceptibility. The test method on thermal stability is intended to predict the print life during normal aging. One of the testing concerns is that some prints do not show significant image change in practical testing times. The test method on pollution susceptibility only deals with ozone and assumes that the reciprocity law applies. This law assumes that a long time under a low pollutant concentration is equivalent to a short time under the high concentration used in the test procedure. Longer term studies include a predictive test for light stability and the preparation of a material specification. The latter requires a decision about the proper colour target to be used and what constitutes an unacceptable colour change. Moreover, a specification which gives a predictive life is very dependent upon the conditions the print encounters and will only apply to specific levels of temperature, ozone and light.

  20. Performance and Internal Control

    OpenAIRE

    Mifti, Sri; Lestariyo, Nugroho Budi; Kowanda, Anacostia

    2009-01-01

    The objective of this study is to measure the influence of internal auditing on performance. Research object is Inspectorate General Department of Home Affairs staffs. As research instrument, questionnaire was developed and distributed to respondents. Closed type questionnaire was developed with five (5) choices to measure the two (2) research variables. Internal auditing is measured using six (6) dimensions, and performance is measured using three (3) dimensions. As the two variables are lat...

  1. International Drug Control Policy

    Science.gov (United States)

    2009-08-24

    Common illegal drugs include cannabis, cocaine, opiates, and synthetic drugs. International trade in these drugs represents a lucrative and what...into effect, decriminalizing “personal use” amounts of marijuana , heroin, cocaine, methamphetamine, and other internationally sanctioned drugs.15 While...President Calls for Legalizing Marijuana ,”CNN.com, May 13, 2009. 15 “Mexico Legalizes Drug Possession,” Associated Press, August 21, 2009. 16 In support

  2. Evaluation of Internal Control

    OpenAIRE

    Gheorghe Suciu; Pipu-Nicolae Barsan

    2013-01-01

    Performance is indissolubly tied to control. Performance cannot be obtained without a strong, adequate control, regardless if it is in the public or private sector. Control is one of management’s attributes and it must be organized, implemented and evaluated in every company, regardless of its size. Each person from a company participates to a greater or lesser extent in the control activities.

  3. Free viewpoint TV and its international standardization

    Science.gov (United States)

    Tanimoto, Masayuki

    2009-05-01

    We have developed a new type of television named FTV (Free-viewpoint TV). FTV is an innovative visual media that enables us to view a 3D scene by freely changing our viewpoints. We proposed the concept of FTV and constructed the world's first real-time system including the complete chain of operation from image capture to display. We also realized FTV on a single PC and FTV with free listening-point audio. FTV is based on the ray-space method that represents one ray in real space with one point in the ray-space. We have also developed new type of ray capture and display technologies such as a 360-degree mirror-scan ray capturing system and a 360 degree ray-reproducing display. MPEG regarded FTV as the most challenging 3D media and started the international standardization activities of FTV. The first phase of FTV is MVC (Multi-view Video Coding) and the second phase is 3DV (3D Video). MVC was completed in March 2009. 3DV is a standard that targets serving a variety of 3D displays. It will be completed within the next two years.

  4. INTERNAL CONTROL OF INVESTMENT PROJECTS

    Directory of Open Access Journals (Sweden)

    Yu. N. Yudenkov

    2010-01-01

    Full Text Available Estimation and technics of the account of expenses, efficiency, financial result should enter into the list of regular checks from service of internal control that demands corresponding vocational training of internal controlers which should own methods of an estimation of expediency of acquisition of long-term actives.

  5. Operational Control of Internal Transport

    NARCIS (Netherlands)

    J.R. van der Meer (Robert)

    2000-01-01

    textabstractOperational Control of Internal Transport considers the control of guided vehicles in vehicle-based internal transport systems found in facilities such as warehouses, production plants, distribution centers and transshipment terminals. The author's interest of research having direct use

  6. National and International Standardization (International Organization for Standardization and European Committee for Standardization Relevant for Sustainability in Construction

    Directory of Open Access Journals (Sweden)

    Renata Morbiducci

    2010-12-01

    Full Text Available Sustainability in construction has a short history in terms of principles, standardizations and applications. From the Brundtland Report “Our Common Future”, a new vision of the resource deficits, climate impacts and the social responsibility gave growth to the idea of sustainability also in design and construction. Consequently, in around 2000, the international and national organizations for standardization started to develop standards for the application of sustainable principles. This paper gives an overview of existing and planned standards, and examples on how to use them as a framework for the development of methods and tools for assessment.

  7. INTERNAL CONTROL IN PUBLIC HEALTH SERVICES INSTITUTIONS

    Directory of Open Access Journals (Sweden)

    Ludmila FRUMUSACHI

    2017-06-01

    Full Text Available Internal control has a special role in the efficient organization of the entity’s management. The components of this control in the institutions of public health service are determined by the specific character of these institutions and National Standards of Internal Control in the Public Sector. The system of internal control in the institutions of public health service has the capacity to canalize the effort of the whole institution for the achievement of proposed objectives, to signalize permanently the dysfunctionalities about the quality of medical services and the deviations and to operate timely corrective measures for eliminating the noticed problems. In this regard the managers are obliged to analyse and to resize the system of internal control when in the organizational structure appear substantial changes.

  8. Accelerated rehabilitation compared with a standard protocol after distal radial fractures treated with volar open reduction and internal fixation: a prospective, randomized, controlled study.

    Science.gov (United States)

    Brehmer, Jess L; Husband, Jeffrey B

    2014-10-01

    There are relatively few studies in the literature that specifically evaluate accelerated rehabilitation protocols for distal radial fractures treated with open reduction and internal fixation (ORIF). The purpose of this study was to compare the early postoperative outcomes (at zero to twelve weeks postoperatively) of patients enrolled in an accelerated rehabilitation protocol with those of patients enrolled in a standard rehabilitation protocol following ORIF for a distal radial fracture. We hypothesized that patients with accelerated rehabilitation after volar ORIF for a distal radial fracture would have an earlier return to function compared with patients who followed a standard protocol. From November 2007 to November 2010, eighty-one patients with an unstable distal radial fracture were prospectively randomized to follow either an accelerated or a standard rehabilitation protocol after undergoing ORIF with a volar plate for a distal radial fracture. Both groups began with gentle active range of motion at three to five days postoperatively. At two weeks, the accelerated group initiated wrist/forearm passive range of motion and strengthening exercises, whereas the standard group initiated passive range of motion and strengthening at six weeks postoperatively. Patients were assessed at three to five days, two weeks, three weeks, four weeks, six weeks, eight weeks, twelve weeks, and six months postoperatively. Outcomes included Disabilities of the Arm, Shoulder and Hand (DASH) scores (primary outcome) and measurements of wrist flexion/extension, supination, pronation, grip strength, and palmar pinch. The patients in the accelerated group had better mobility, strength, and DASH scores at the early postoperative time points (zero to eight weeks postoperatively) compared with the patients in the standard rehabilitation group. The difference between the groups was both clinically relevant and statistically significant. Patients who follow an accelerated rehabilitation

  9. National treatment in international trade: National law and international standards

    Directory of Open Access Journals (Sweden)

    Divljak Drago

    2014-01-01

    Full Text Available The subject of the paper is the principle of national treatment, namely one of the basic principles of international trade. The objective is to determine its outreach and contents set in the forms of international trade organising, primarily in the World Trade Organization, from a legal perspective, naturally, all in the context of the Serbian law. The analysis that has been carried out indicates that there is an obvious intention of our legislators to harmonise in principle our legislation with the WTO requirements and standards, which are incomplete themselves and cause disputes that are not resolved in the practice of dispute resolving either entirely or consistently. In our law, a step forward has been made in relation to the situation from the previous relevant legislation, because the application of this principle is extended not only to trade with goods but also to trade with services, and to industrial property rights. However, in the most significant, basic field, namely trade with goods, it is still being done in a general way, by simplifying the entire topic and bringing it down only to protection against discrimination and neglecting the sphere of protectionism. Such acting does not include all the complexity of this matter and it is not entirely harmonised with the WTO requirements. However, a good side of such an approach is that it gives the state more freedom for acting in this sphere, which may be acceptable in the transition period until full membership of Serbia in this organization.

  10. 49 CFR 193.2631 - Internal corrosion control.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Internal corrosion control. 193.2631 Section 193... GAS FACILITIES: FEDERAL SAFETY STANDARDS Maintenance § 193.2631 Internal corrosion control. Each component that is subject to internal corrosive attack must be protected from internal corrosion by— (a...

  11. Russian seismic standards and demands for equipment and their conformity with international standards

    International Nuclear Information System (INIS)

    Kaznovsky, S.; Ostretsov, I.

    1993-01-01

    The principle regulations of standard documents concerning seismic safety of NPPs and demands for reactor equipment conformity with international standards are presented in this report. General state of NPP safety standards is reviewed, with a special emphasis on the state of seismic design standards for NPP equipment and piping. Russian standards documents on seismic resistance of NPPs and requirements are compared to international ones

  12. MULTIVARIATE ACCOUNTING IN INTERNATIONAL FINANCIAL REPORTING STANDARDS

    Directory of Open Access Journals (Sweden)

    V. V. IEVDOKYMOV

    2017-03-01

    Full Text Available The necessity of the research on the basis of the positivist model of scientific knowledge is proved. The value of the conceptual framework in the process of bookkeeping selection is analyzed. The differences of the accounting selection adjustment procedure in US GAAP and IFRS are considered. The role and importance of the qualitative characteristics of financial reporting in the implementation of accounting selection are substantiated. The structure of the qualitative characteristics of financial reporting and their limitations under the Conceptual Framework for the preparation and presentation of financial statements are examined. The correlation between the accounting rules and alternatives adopted in US GAAP and IAS / IFRS is analyzed. The necessity to discuss the issue of the feasibility of «rule-oriented» or «principle-oriented» accounting model in the context of multivariate concept is studied. The authors prove the necessity of the application of institutional theory to solve the problems of accounting opportunism that arises when using the concept of multivariate accounting in International Financial Reporting Standards.

  13. The internal control of tax

    OpenAIRE

    E. B. Shuvalova; L. A. Butenko; Ju. A. Rudenko

    2016-01-01

    The aim of the research is to study the theoretical and practical issues of internal fiscal control. Internal tax control system requires the development of methodological tools, its scientific basis and practical recommendations for the application. This difficult task is now solved only in organizations, which are the largest taxpayers. For small and medium-sized businesses in the organization of internal fiscal control may improve the quality of the accounting organization of the company. ...

  14. Expanding Internal Control Functionality Scope

    Directory of Open Access Journals (Sweden)

    Mykola M. Vuitsiv

    2012-08-01

    Full Text Available The article reviews the influence of «western» concepts of the information needs of management process provisions on forming and developing the up-to-date model of Internal Control. An attempt has been made to develop the approach to solve urgent management tasks by applying the ideas of controlling and management accounting via the traditional national approach to the content of control. The place of control in the enterprise management information system has also been reviewed.

  15. International Standards for Neurological Classification of Spinal Cord Injury

    DEFF Research Database (Denmark)

    Kirshblum, S C; Biering-Sorensen, F; Betz, R

    2014-01-01

    The International Standards for the Neurological Classification of Spinal Cord Injury (ISNCSCI) is routinely used to determine the levels of injury and to classify the severity of the injury. Questions are often posed to the International Standards Committee of the American Spinal Injury Associat......The International Standards for the Neurological Classification of Spinal Cord Injury (ISNCSCI) is routinely used to determine the levels of injury and to classify the severity of the injury. Questions are often posed to the International Standards Committee of the American Spinal Injury...

  16. Asset Accounting According to National and International Standards

    OpenAIRE

    Karina Utenkova

    2014-01-01

    The Article overviews the issues of complying National Accounting Standards at the enterprises of Ukraine with International Financial Reporting Standards. Key provisions of national and international standards governing the accounting of fixed assets (NP(S)A 7 'Property, Plant, Equipment', IFRS 16 'Fixed Assets') have been analyzed. It has been found that the list of PPE regulated by both accounting standard frameworks is not identical. Specifics of fixed assets recognition, their classifica...

  17. Determinants of Effective Internal Control System in Nigerian Banks ...

    African Journals Online (AJOL)

    Determinants of Effective Internal Control System in Nigerian Banks. ... (21) chief internal auditors of selected recapitalized banks currently operating in Port Harcourt. ... can be carried out, high level ethical standards should be enshrined in Nigerian banks to make internal control more effective. ... HOW TO USE AJOL.

  18. Thermonuclear controlled fusion: international cooperation

    International Nuclear Information System (INIS)

    Conscience, J.-F.

    2001-01-01

    This report summarizes the current worldwide status of research in the field of thermonuclear controlled fusion as well as the international research programme planed for the next decades. The two main projects will be the ITER facility (International Thermonuclear Experimental Reactor) that should produce 10 times more energy than the energy injected, and the IFMIF (International Fusion Materials Irradiation Facility) designed to study the reactions of materials under intense neutron fluxes. The future of the pioneering JET facility (Joint European Torus) is also discussed. The engagement of the various countries (USA, Japan, Germany, Russian Federation and Canada) and international organisations (EURATOM and IEA) in terms of investment and research is described. Switzerland is involved in this program through an agreement with EURATOM and is mainly dedicated to experimental studies with the TCV machine in Lausanne and numerical studies of plasma configurations. It will participate to the development of the microwave plasma heating system for the ITER machine

  19. Streamlining the Bankability Process using International Standards

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, Sarah [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Repins, Ingrid L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Kelly, George [Sunset Technology, Mount Airy, MD; Ramu, Govind [SunPower, San Jose, California; Heinz, Matthias [TUV Rheinland, Cologne, Germany; Chen, Yingnan [CGC (China General Certification Center), Beijing; Wohlgemuth, John [PowerMark, Union Hall, VA; Lokanath, Sumanth [First Solar, Tempe, Arizona; Daniels, Eric [Suncycle USA, Frederick MD; Hsi, Edward [Swiss RE, Zurich, Switzerland; Yamamichi, Masaaki [RTS, Trumbull, CT

    2017-09-27

    NREL has supported the international efforts to create a streamlined process for documenting bankability and/or completion of each step of a PV project plan. IECRE was created for this purpose in 2014. This poster describes the goals, current status of this effort, and how individuals and companies can become involved.

  20. International Standards for Neurological Classification of Spinal Cord Injury:

    DEFF Research Database (Denmark)

    Kirshblum, S C; Biering-Sørensen, Fin; Betz, R

    2014-01-01

    The International Standards for the Neurological Classification of Spinal Cord Injury (ISNCSCI) is routinely used to determine levels of injury and to classify the severity of the injury. Questions are often posed to the International Standards Committee of the American Spinal Injury Association...

  1. AUDIT OF FINANCIAL REPORTS, BASED ON INTERNATIONAL ACCOUNTING STANDARDS

    OpenAIRE

    Islom Kuziev

    2011-01-01

    In this article are given main notion about international standard of financial reporting, order of the auditing on the base of IFRS, scheduling the report of the auditor, auditor conclusions and are given analysis of reporting based on the auditor procedures. At the audit of financial reporting are taken into account international standard to financial reporting 29 "Financial reporting in hyperinflationary economies".

  2. 46 CFR 133.03 - Relationship to international standards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Relationship to international standards. 133.03 Section 133.03 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS LIFESAVING SYSTEMS General § 133.03 Relationship to international standards. This subpart and subpart B of...

  3. 46 CFR 108.503 - Relationship to international standards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Relationship to international standards. 108.503 Section 108.503 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.503 Relationship to international standards. For...

  4. Internal control in an EDI environment.

    OpenAIRE

    Bae, Dal Hyeoung

    1991-01-01

    Approved for public release; distribution in unlimited. Electronic Data Interchange(EDI) is the electronic transmission of standard business documents in machine-readable format between parent companies and respective trading partners. As the use of EDI has grown, there have been the associated risks due to an uncontrolled environment. Accordingly, the necessity for effective internal controls in an EDI environment is on the rise. This thesis evaluates and analyzes the feasi...

  5. Trade and the distributional politics of international labour standards

    OpenAIRE

    Oslington, Paul

    2005-01-01

    This paper constructs a simple general equilibrium model of the trade and distributional effects of spreading advanced country international labour standards to developing countries. Labour standards (including minimum safety requirements, prohibition of prison and child labour, and rights to unionise) are represented as a floor to the cost of employing labour. The model shows how the spread of standards affects the terms of trade and pattern of international specialisation, and can shift ...

  6. International Standardization of the Clinical Dosimetry of Beta Radiation Brachytherapy Sources: Progress of an ISO Standard

    Science.gov (United States)

    Soares, Christopher

    2006-03-01

    In 2004 a new work item proposal (NWIP) was accepted by the International Organization for Standardization (ISO) Technical Committee 85 (TC85 -- Nuclear Energy), Subcommittee 2 (Radiation Protection) for the development of a standard for the clinical dosimetry of beta radiation sources used for brachytherapy. To develop this standard, a new Working Group (WG 22 - Ionizing Radiation Dosimetry and Protocols in Medical Applications) was formed. The standard is based on the work of an ad-hoc working group initiated by the Dosimetry task group of the Deutsches Insitiut für Normung (DIN). Initially the work was geared mainly towards the needs of intravascular brachytherapy, but with the decline of this application, more focus has been placed on the challenges of accurate dosimetry for the concave eye plaques used to treat ocular melanoma. Guidance is given for dosimetry formalisms, reference data to be used, calibrations, measurement methods, modeling, uncertainty determinations, treatment planning and reporting, and clinical quality control. The document is currently undergoing review by the ISO member bodies for acceptance as a Committee Draft (CD) with publication of the final standard expected by 2007. There are opportunities for other ISO standards for medical dosimetry within the framework of WG22.

  7. International Standardization of Pure Beta Emitters

    International Nuclear Information System (INIS)

    Los Arcos, Jose Maria; Rodriguez, Leonor

    2006-01-01

    The paper describes the traditional methods of standardization of Pure Beta Emitters, their principal characteristics, advantage and drawbacks. It does comparisons between two metrological LSC methods: Triple to double coincidence ratio (TDCR) method and the CIEMAT/NIST method and presents the result obtained with several Key Comparisons serving as practical test of both methods. Both of them represent the siferrit of methods of standardization of pure (and mixed decay) radionuclides. ESIR WG of CCRI(II) is to implement a reference exchange system for the permanent equivalence of β, α and electron capture nuclides, similar to traditional SIR gamma. ESIR project is currently testing a new XAN scintillator and operational tests of the whole system at BIPM are expected by the end of 2006 (test restricted to ESIR NMI members)

  8. Current situation of International Organization for Standardization/Technical Committee 249 international standards of traditional Chinese medicine.

    Science.gov (United States)

    Liu, Yu-Qi; Wang, Yue-Xi; Shi, Nan-Nan; Han, Xue-Jie; Lu, Ai-Ping

    2017-05-01

    To review the current situation and progress of traditional Chinese medicine (TCM) international standards, standard projects and proposals in International Organization for Standardization (ISO)/ technical committee (TC) 249. ISO/TC 249 standards and standard projects on the ISO website were searched and new standard proposals information were collected from ISO/TC 249 National Mirror Committee in China. Then all the available data were summarized in 5 closely related items, including proposed time, proposed country, assigned working group (WG), current stage and classifification. In ISO/TC 249, there were 2 international standards, 18 standard projects and 24 new standard proposals proposed in 2014. These 44 standard subjects increased year by year since 2011. Twenty-nine of them were proposed by China, 15 were assigned to WG 4, 36 were in preliminary and preparatory stage and 8 were categorized into 4 fifields, 7 groups and sub-groups based on International Classifification Standards. A rapid and steady development of international standardization in TCM can be observed in ISO/TC 249.

  9. Standards: The Keys to Domestic and International Competitiveness.

    Science.gov (United States)

    Hunter, Robert D.

    1993-01-01

    Demonstrates the importance of standards for the competitiveness of U.S. companies and for international trade. The value of standards in research and development, marketing, design, purchasing, manufacturing, installation, and service is explained. Examples of specific standards and their application to the computer industry are included. (10…

  10. Brief International Cognitive Assessment for MS (BICAMS): international standards for validation.

    Science.gov (United States)

    Benedict, Ralph H B; Amato, Maria Pia; Boringa, Jan; Brochet, Bruno; Foley, Fred; Fredrikson, Stan; Hamalainen, Paivi; Hartung, Hans; Krupp, Lauren; Penner, Iris; Reder, Anthony T; Langdon, Dawn

    2012-07-16

    An international expert consensus committee recently recommended a brief battery of tests for cognitive evaluation in multiple sclerosis. The Brief International Cognitive Assessment for MS (BICAMS) battery includes tests of mental processing speed and memory. Recognizing that resources for validation will vary internationally, the committee identified validation priorities, to facilitate international acceptance of BICAMS. Practical matters pertaining to implementation across different languages and countries were discussed. Five steps to achieve optimal psychometric validation were proposed. In Step 1, test stimuli should be standardized for the target culture or language under consideration. In Step 2, examiner instructions must be standardized and translated, including all information from manuals necessary for administration and interpretation. In Step 3, samples of at least 65 healthy persons should be studied for normalization, matched to patients on demographics such as age, gender and education. The objective of Step 4 is test-retest reliability, which can be investigated in a small sample of MS and/or healthy volunteers over 1-3 weeks. Finally, in Step 5, criterion validity should be established by comparing MS and healthy controls. At this time, preliminary studies are underway in a number of countries as we move forward with this international assessment tool for cognition in MS.

  11. CSNI International Standard Problems (ISP). Brief descriptions (1975-1994)

    International Nuclear Information System (INIS)

    1994-07-01

    Between 1975 and 1994 the NEA Committee on the Safety of Nuclear Installations (CSNI) has sponsored some forty International Standard Problems (ISPs) in the fields of in-vessel thermal-hydraulic behaviour, fuel behaviour under accident conditions, fission product release and transport, core/concrete interactions, hydrogen distribution and mixing, containment thermal-hydraulics. ISPs are comparative exercises in which predictions of different computer codes for a given physical problem are compared with each other or with the results of a carefully controlled experimental study. The main goal of ISP exercises is to increase confidence in the validity and accuracy of tools which are used in assessing the safety of nuclear installations. Moreover, they enable code users to gain experience and demonstrate their competence. ISPs are performed as 'open' or 'blind' problems. In an open Standard Problem the results of the experiment are available to the participants before performing the calculations, while in a blind Standard Problem the results are locked until the calculational results are made available for comparison. Experiments selected to support ISP exercises are exceptionally well documented; they provide the framework for several code validation matrices. This report briefly describes 36 ISPs and 3 containment analysis standard problems (CASP)

  12. Cultural impact on the harmonisation of Russian Accounting Standards with the International Financial Reporting Standards: A practitioner's perspective

    OpenAIRE

    Combs, A; Samy, M; Myachina, A

    2013-01-01

    Purpose\\ud – The purpose of this paper is to explore cultural impact on the harmonisation of Russian Accounting Standards with International Financial Reporting Standards (IFRS).\\ud \\ud Design/methodology/approach\\ud – A theoretical review established that differences still exist between the two sets of accounting standards. For decades, Russia was a socialist state of planned economy. Accounting was a tool of centralised control, and accountants had a job of gathering information for statist...

  13. Software Quality Assurance and Controls Standard

    Science.gov (United States)

    2010-04-27

    dassurance a wor pro uc s an processes comply with predefined provisions and plans. • According to International Standard (IS) 12207 – of the 44...from document (plan) focus to process focus – Alignment with framework standard IS 12207 software life cycle (SLC) processes with exact...Books and P blications IEEE Software and Systems Engineering curriculum ABET u Certified Software Development Professional Standards ISO /IEC

  14. Nuclear Data Center International Standard Towards TSO Initiative

    International Nuclear Information System (INIS)

    Raja Murzaferi Raja Moktar; Mohd Fauzi Haris; Siti Nurbahyah Hamdan

    2011-01-01

    Nuclear Data Center is the main facility for Nuclear Malaysia Agency IT infrastructure comprising of main critical servers, research and operational data storage, HPC-clusters system and vital network core equipment. In recent years, international body such as TIA-Telecommunication Industry Association and Up time Institute have came out with proper international data center standards in order to ensure data center operation on achieving maximum operational up time and minimal downtime. The standard are currently being rated as tier level ranging from Data Center tier I up to tier IV, differentiate by facility standard and up time/ downtime percentage ratio. This paper will discuss Nuclear Data Center adopting international standards in supporting Nuclear Malaysia TSO initiative thus ensuring the critical core component of agency IT services availability and further more International standard recognitions. (author)

  15. European and International Standards on health and safety in welding

    International Nuclear Information System (INIS)

    Howe, A

    2009-01-01

    A number of European and International Standards on health and safety in welding have been published in recent years and work on several more is nearing completion. These standards have been prepared jointly by the International Standards Organization (ISO) and the European Committee for Standardization (CEN). The standards development work has mostly been led by CEN/TC 121/SC 9, with excellent technical input from experts within Europe; but work on the revision of published standards, which has recently gathered pace, is now being carried out by ISO/TC 44/SC 9, with greater international involvement. This paper gives an overview of the various standards that have been published, are being revised or are under development in this field of health and safety in welding, seeking to (i) increase international awareness of published standards, (ii) encourage wider participation in health and safety in welding standards work and (iii) obtain feedback and solicit comments on standards that are currently under development or revision. Such an initiative is particularly timely because work is currently in progress on the revision of one of the more important standards in this field, namely EN ISO 10882:2001 Health and safety in welding and allied processes- Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles.

  16. The international development of forensic science standards - A review.

    Science.gov (United States)

    Wilson-Wilde, Linzi

    2018-04-16

    Standards establish specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform as intended. Standards can be used in the accreditation of forensic laboratories or facilities and in the certification of products and services. In recent years there have been various international activities aiming at developing forensic science standards and guidelines. The most significant initiative currently underway within the global forensic community is the development of International Organization for Standardization (ISO) standards. This paper reviews the main bodies working on standards for forensic science, the processes used and the implications for accreditation. This paper specifically discusses the work of ISO Technical Committee TC272, the future TC272 work program for the development of forensic science standards and associated timelines. Also discussed, are the lessons learnt to date in navigating the complex environment of multi-country stakeholder deliberations in standards development. Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.

  17. The protection of migrant workers and international labour standards.

    Science.gov (United States)

    Bohning, W R

    1988-06-01

    International labor standards take the form of Conventions and Recommendations that embody the agreements reached by a 2/3 majority of the representatives of Governments, Employers, and Workers of International Labour Office (ILO) member states. Originally designed to guard against the danger that 1 country or other would keep down wages and working conditions to gain competitive advantage and thereby undermine advances elsewhere, international labor standards have also been inspired by humanitarian concerns--the visible plight of workers and the physical dangers of industrialization and by the notion of social justice, which embraces wellbeing and dignity, security, and equality as well as a measure of participation in economic and social matters. ILO standards apply to workers generally and therefore also to migrant workers, irrespective of the fact that the general standards are complemented by standards especially for migrant workers. The social security protection of migrant workers has been dealt with in ILO instruments primarily from the angle of equality of treatment but also from that of the maintenance of acquired rights and rights in course of acquisition, including the payment of benefits to entitled persons resident abroad. The ILO Conventions on migrant workers and the Recommendations which supplement them deal with practically all aspects of the work and life of non-nationals such as recruitment matters, information to be made available, contract conditions, medical examination and attention, customs, exemption for personal effects, assistance in settling into their new environment, vocational training, promotion at work, job security and alternative employment, liberty of movement, participation in the cultural life of the state as well as maintenance of their own culture, transfer of earnings and savings, family reunification and visits, appeal against unjustified termination of employment or expulsion, and return assistance. ILO's supervisory

  18. Using PISA as an International Benchmark in Standard Setting.

    Science.gov (United States)

    Phillips, Gary W; Jiang, Tao

    2015-01-01

    This study describes how the Programme for International Student Assessment (PISA) can be used to internationally benchmark state performance standards. The process is accomplished in three steps. First, PISA items are embedded in the administration of the state assessment and calibrated on the state scale. Second, the international item calibrations are then used to link the state scale to the PISA scale through common item linking. Third, the statistical linking results are used as part of the state standard setting process to help standard setting panelists determine how high their state standards need to be in order to be internationally competitive. This process was carried out in Delaware, Hawaii, and Oregon, in three subjects-science, mathematics and reading with initial results reported by Phillips and Jiang (2011). An in depth discussion of methods and results are reported in this article for one subject (mathematics) and one state (Hawaii).

  19. Housekeeping genes as internal standards: use and limits.

    Science.gov (United States)

    Thellin, O; Zorzi, W; Lakaye, B; De Borman, B; Coumans, B; Hennen, G; Grisar, T; Igout, A; Heinen, E

    1999-10-08

    Quantitative studies are commonly realised in the biomedical research to compare RNA expression in different experimental or clinical conditions. These quantifications are performed through their comparison to the expression of the housekeeping gene transcripts like glyceraldehyde-3-phosphate dehydrogenase (G3PDH), albumin, actins, tubulins, cyclophilin, hypoxantine phsophoribosyltransferase (HRPT), L32. 28S, and 18S rRNAs are also used as internal standards. In this paper, it is recalled that the commonly used internal standards can quantitatively vary in response to various factors. Possible variations are illustrated using three experimental examples. Preferred types of internal standards are then proposed for each of these samples and thereafter the general procedure concerning the choice of an internal standard and the way to manage its uses are discussed.

  20. 12 CFR 618.8430 - Internal controls.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Internal controls. 618.8430 Section 618.8430 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM GENERAL PROVISIONS Internal Controls § 618.8430 Internal controls. Each Farm Credit institution's board of directors must adopt an internal...

  1. An Approach to Establishing International Quality Standards for Medical Travel

    Directory of Open Access Journals (Sweden)

    Ondřej eKácha

    2016-03-01

    Full Text Available Traveling abroad to receive a non-elective treatment is expanding each year. Such rising popularity of medical travel and the absence of clear minimum quality requirements in this area urgently calls for setting international standards to ensure good practice and patient safety. The aim of this study is to identify the key domains in medical travel where such quality standards should be established. Drawing from the evidence-based OECD framework and an extensive literature review, this study proposes three critical areas for international quality standards in medical travel: minimum standards of health care facilities and third-party agencies, financial responsibility and patient-centeredness. Several cultural challenges are subsequently introduced that may pose a barrier to the development of the guidelines and should be additionally taken into consideration. Establishing international quality standards in medical travel enhances the benefits to patients and providers, which is urgently needed given the rapid growth in this industry.

  2. International standards, Agreements and Policy of food Irradiation

    International Nuclear Information System (INIS)

    Roberts, P.B.

    1997-01-01

    There are few internationally recognised standards and agreements related to irradiated foods. Codex Alimentarius has its General standard for Irradiated foods. This sets standards for the production of irradiated foods that are safe and nutritionally adequate. Guidelines for the proper processing of foods by irradiation are covered in the Codex Recommended International Code of Practice for the Operation of Radiation Facilities Used for the Treatment of Food. For irradiation as a quarantine treatment for fruit, vegetables and other plants, the relevant international organization is the International Plant Protection Convention (IPPC), IPPC has no standards or guidelines for irradiation treatments. However, regional organizations within IPPC are moving towards recognition of irradiation as a technically viable and effective method of insect disinfestation. Especially notable are actions within the North American Plant Protection Organisation (NAPPO). NAPPO has endorsed a standard on the use of irradiation as a quarantine treatment. Other speakers have provided considerable detail on the Codex standard and on the situation with regard to quarantine issues. In this talk I will concentrate on irradiated foods as commodities that will be traded internationally in increasing amounts as we approach the next century. International trade is governed by bilateral arrangements. However, these arrangements should be consistent with the overarching multilateral agreements of the World trade Organization (WTO). The WTO Agreements do not refer directly to irradiation or irradiated foods. However, in this talk I will try to interpret the implications of the Agreements for trade in irradiated food. (Author)

  3. International standards, Agreements and Policy of food Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, P.B. [Industrial and Biological Section. Institute of Geological and Nuclear Science. P.O. Box 31. Lower Hutt (New Zealand)

    1997-12-31

    There are few internationally recognised standards and agreements related to irradiated foods. Codex Alimentarius has its General standard for Irradiated foods. This sets standards for the production of irradiated foods that are safe and nutritionally adequate. Guidelines for the proper processing of foods by irradiation are covered in the Codex Recommended International Code of Practice for the Operation of Radiation Facilities Used for the Treatment of Food. For irradiation as a quarantine treatment for fruit, vegetables and other plants, the relevant international organization is the International Plant Protection Convention (IPPC), IPPC has no standards or guidelines for irradiation treatments. However, regional organizations within IPPC are moving towards recognition of irradiation as a technically viable and effective method of insect disinfestation. Especially notable are actions within the North American Plant Protection Organisation (NAPPO). NAPPO has endorsed a standard on the use of irradiation as a quarantine treatment. Other speakers have provided considerable detail on the Codex standard and on the situation with regard to quarantine issues. In this talk I will concentrate on irradiated foods as commodities that will be traded internationally in increasing amounts as we approach the next century. International trade is governed by bilateral arrangements. However, these arrangements should be consistent with the overarching multilateral agreements of the World trade Organization (WTO). The WTO Agreements do not refer directly to irradiation or irradiated foods. However, in this talk I will try to interpret the implications of the Agreements for trade in irradiated food. (Author)

  4. 46 CFR 199.03 - Relationship to international standards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Relationship to international standards. 199.03 Section 199.03 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) LIFESAVING APPLIANCES AND ARRANGEMENTS LIFESAVING SYSTEMS FOR CERTAIN INSPECTED VESSELS General § 199.03 Relationship to international...

  5. International accounting standards and their effect on mergers and acquisitions

    Directory of Open Access Journals (Sweden)

    Blanca I. Vega Castro

    2007-09-01

    Full Text Available The main objective of this paper is to investigate whether the international accounting harmonization has favored the globalization process. This investigation examined the relationship between international accounting standards and the international merger and acquisition activities in Argentina, Brazil, Chile, México, Peru and Venezuela from 1995 to 2004. This research tested four hypotheses and used analytics such as panel data analysis, correlation, nonparametric tests and logistic regression.

  6. Control Systems Cyber Security Standards Support Activities

    Energy Technology Data Exchange (ETDEWEB)

    Robert Evans

    2009-01-01

    The Department of Homeland Security’s Control Systems Security Program (CSSP) is working with industry to secure critical infrastructure sectors from cyber intrusions that could compromise control systems. This document describes CSSP’s current activities with industry organizations in developing cyber security standards for control systems. In addition, it summarizes the standards work being conducted by organizations within the sector and provides a brief listing of sector meetings and conferences that might be of interest for each sector. Control systems cyber security standards are part of a rapidly changing environment. The participation of CSSP in the development effort for these standards has provided consistency in the technical content of the standards while ensuring that information developed by CSSP is included.

  7. Determinants of Effective Information Transfer in International Regulatory Standards Adoption

    Science.gov (United States)

    Popescu, Denisa

    2010-01-01

    The role of international regulatory standards within the current global environment has become of the most importance. The age of the global system and free market capitalism carried us into the unprecedented age of regulations, and standard setting. Regulations are now becoming the emerging mode of global governance. This study focuses on…

  8. The main requirements of the International Basic Safety Standards

    International Nuclear Information System (INIS)

    Webb, G.A.M.

    1998-01-01

    The main requirements of the new international basic safety standards are discussed, including such topics as health effects of ionizing radiations, the revision of basic safety standards, the requirements for radiation protection practices, the requirements for intervention,and the field of regulatory infrastructures. (A.K.)

  9. Human Rights and Values Education: Using the International Standards.

    Science.gov (United States)

    Reardon, Betty A.

    1994-01-01

    Asserts that, in teaching about human rights, the international standards should be the fundamental core of the content and values to be communicated. Recommends that teachers should use the Universal Declaration of Human Rights as the standard by which the actions of individuals and governments should be compared. (CFR)

  10. Adaptations of International Standards on Educational Leadership Preparation in Egypt

    Science.gov (United States)

    Purinton, Ted; Khalil, Dalia

    2016-01-01

    This paper is a case study of one leadership preparation program, utilizing US school leadership standards and practices, offered in Egypt. This case study illuminates how cultural and policy distinctions impact differing necessities of educational leadership, and how those necessities conflict or concur with the international standards and…

  11. Review international standards for grid connected photovoltaic systems in Malaysia

    International Nuclear Information System (INIS)

    Mekhilef, S.; Rahim, N.A.

    2006-01-01

    Grid connected PV is being applied on variety application including large centralised stations, commercial building and individual houses. There is a need for specific standard to address distinctive new issue created by grid connected PV power system. Internationally many countries are attempting to develop standards for building integration, Dc side issues and grid connection issues. This paper surveys the current development state of the major countries standards in this area, comparing and contrasting, standards and guideline under development, also addressing the need of standards for grid connected in Malaysia

  12. Study on a Threat-Countermeasure Model Based on International Standard Information

    Directory of Open Access Journals (Sweden)

    Guillermo Horacio Ramirez Caceres

    2008-12-01

    Full Text Available Many international standards exist in the field of IT security. This research is based on the ISO/IEC 15408, 15446, 19791, 13335 and 17799 standards. In this paper, we propose a knowledge base comprising a threat countermeasure model based on international standards for identifying and specifying threats which affect IT environments. In addition, the proposed knowledge base system aims at fusing similar security control policies and objectives in order to create effective security guidelines for specific IT environments. As a result, a knowledge base of security objectives was developed on the basis of the relationships inside the standards as well as the relationships between different standards. In addition, a web application was developed which displays details about the most common threats to information systems, and for each threat presents a set of related security control policies from different international standards, including ISO/IEC 27002.

  13. Implementation of International Standards in Russia's Foreign Trade Statistics

    Directory of Open Access Journals (Sweden)

    Natalia E. Grigoruk

    2015-01-01

    Full Text Available The article analyzes the basic documents of international organizations in recent years, which have become the global standard for the development and improvement of statistics of foreign economic relations of most countries, including the Russian Federation. The article describes the key features of the theory and practice of modern foreign trade statistics in Russia and abroad, with an emphasis on the methodological problems of its main parts - the external trade statistics. It shows their interpretation in the most recent recommendations by UN statistical apparatus and other international organizations; considers a range of problems associated with the implementation of the national statistical practices of countries, including Russia and the countries of the Customs Union, the main international standard of foreign trade statistics - UN document "International Merchandise Trade Statistics". The main attention is paid to methodological issues such as: the criteria for selecting the objects of statistical accounting in accordance with international standards, quantitative and cost parameters of foreign trade statistics, statistical methods and estimates of commodity exports and imports, the problems of comparability of data; to a comparison of international standards in 2010 with documents on key precursor methodology of foreign trade statistics, characterized by the practice of introducing these standards in the foreign trade statistics of Russia and the countries of the Customs Union. The article analyzes the content given in the official statistical manuals of Russia foreign trade and foreign countries, covers the main methodological problems of World Trade in conjunction with the major current international statistical standards - System of National Accounts, Manual on Statistics of International Trade in Services and other documents; provides specific data describing the current structure of Russian foreign trade and especially its

  14. Dosimetry control for radiation processing - basic requirements and standards

    International Nuclear Information System (INIS)

    Ivanova, M.; Tsrunchev, Ts.

    2004-01-01

    A brief review of the basic international codes and standards for dosimetry control for radiation processing (high doses dosimetry), setting up a dosimetry control for radiation processing and metrology control of the dosimetry system is made. The present state of dosimetry control for food processing and the Bulgarian long experience in food irradiation (three irradiation facilities are operational at these moment) are presented. The absence of neither national standard for high doses nor accredited laboratory for calibration and audit of radiation processing dosimetry systems is also discussed

  15. Investigating the effective factors on management internal controls applying

    Directory of Open Access Journals (Sweden)

    Ahmad Ahmadkhani

    2012-08-01

    Full Text Available Information technology plays an important role on increasing internal control in many organizations. In this paper, we present an empirical study to measure the impact of information technology, hiring high quality skilled management team, using high quality standards and increasing employees' awareness on managing internal control. The survey uses a questionnaire based on Likert scale and distributes among the people who work in either administration or financial sectors of governmental agencies in province of Zanjan, Iran. The results of the study indicate that the implementation of information technology positively influences management team to control their system, more effectively, using more skilled and specialized managers positively influences management internal control, an organization with suitable standard positively influences management internal control and increasing employees' awareness positively influences management internal control.

  16. Standard methods for sampling freshwater fishes: opportunities for international collaboration

    OpenAIRE

    Bonar, Scott A.; Mercado-Silva, Norman; Hubert, Wayne A.; Beard, T. Douglas; Dave, Göran; Kubečka, Jan; Graeb, Brian D.S.; Lester, Nigel P.; Porath, Mark; Winfield, Ian J.

    2017-01-01

    With publication of Standard Methods for Sampling North American Freshwater Fishes in 2009, the American Fisheries Society (AFS) recommended standard procedures for North America. To explore interest in standardizing at intercontinental scales, a symposium attended by international specialists in freshwater fish sampling was convened at the 145th Annual AFS Meeting in Portland, Oregon, in August 2015. Participants represented all continents except Australia and Antarctica and were employed by...

  17. International Longitudinal Paediatric Reference Standards for Bone Mineral Content

    Science.gov (United States)

    Baxter-Jones, Adam DG; McKay, Heather; Burrows, Melonie; Bachrach, Laura K; Lloyd, Tom; Petit, Moira; Macdonald, Heather; Mirwald, Robert L; Bailey, Don

    2014-01-01

    To render a diagnosis pediatricians rely upon reference standards for bone mineral density or bone mineral content, which are based on cross-sectional data from a relatively small sample of children. These standards are unable to adequately represent growth in a diverse pediatric population. Thus, the goal of this study was to develop sex and site specific standards for BMC using longitudinal data collected from four international sites in Canada and the United States. Data from four studies were combined; Saskatchewan Paediatric Bone Mineral Accrual Study (n=251), UBC Healthy Bones Study (n=382); Penn State Young Women’s Health Study (n=112) and Stanford’s Bone Mineral Accretion study (n=423). Males and females (8 to 25 years) were measured for whole body (WB), total proximal femur (PF), femoral neck (FN) and lumbar spine (LS) BMC (g). Data were analyzed using random effects models. Bland-Altman was used to investigate agreement in predicted and actual data. Age, height, weight and ethnicity independently predicted BMC accrual across sites (P accrual; Hispanic 75.4 (28.2) g less BMC accrual; Blacks 82.8 (26.3) g more BMC accrual with confounders of age, height and weight controlled. Similar findings were found for PF and FN. Female models for all sites were similar with age, height and weight all independent significant predictors of BMC accrual (P accounting for age, size, sex and ethnicity. In conclusion, when interpreting BMC in paediatrics we recommend standards that are sex, age, size and ethnic specific. PMID:19854308

  18. International longitudinal pediatric reference standards for bone mineral content.

    Science.gov (United States)

    Baxter-Jones, Adam D G; Burrows, Melonie; Bachrach, Laura K; Lloyd, Tom; Petit, Moira; Macdonald, Heather; Mirwald, Robert L; Bailey, Don; McKay, Heather

    2010-01-01

    To render a diagnosis pediatricians rely upon reference standards for bone mineral density or bone mineral content, which are based on cross-sectional data from a relatively small sample of children. These standards are unable to adequately represent growth in a diverse pediatric population. Thus, the goal of this study was to develop sex and site-specific standards for BMC using longitudinal data collected from four international sites in Canada and the United States. Data from four studies were combined; Saskatchewan Paediatric Bone Mineral Accrual Study (n=251), UBC Healthy Bones Study (n=382); Penn State Young Women's Health Study (n=112) and Stanford's Bone Mineral Accretion study (n=423). Males and females (8 to 25 years) were measured for whole body (WB), total proximal femur (PF), femoral neck (FN) and lumbar spine (LS) BMC (g). Data were analyzed using random effects models. Bland-Altman was used to investigate agreement between predicted and actual data. Age, height, weight and ethnicity independently predicted BMC accrual across sites (Paccrual; Hispanic 75.4 (28.2) g less BMC accrual; Blacks 82.8 (26.3) g more BMC accrual with confounders of age, height and weight controlled. We report similar findings for the PF and FN. Models for females for all sites were similar with age, height and weight as independent significant predictors of BMC accrual (Paccounting for age, size, sex and ethnicity. In conclusion, when interpreting BMC in pediatrics we recommend standards that are sex, age, size and ethnic specific. Copyright (c) 2009 Elsevier Inc. All rights reserved.

  19. Thirty years of international nuclear standards in ISO and IEC

    International Nuclear Information System (INIS)

    Becker, K.

    1991-01-01

    Of over 4700 nuclear and radiation protection standards, laws, regulations, recommendations, etc., which have been issued by 52 countries and several governmental international organizations such as IAEA, or non-government organizations such as ICRP, ICRU, ISO and IEC, more than 90% are national, and more than half of those of a non-regulatory nature. Both number and importance of international standards are, however, increasing. The two most important non-governmental international standards organizations are the International Organization for Standardization (ISO), which founded a Technical Committee (TC) 85 'Nuclear Energy' with several Sub-Committees in 1957, and the closely associated International Electrotechnical Commission (IEC) with its TC 45 'Nuclear Instrumentation' formed in 1960. There are over 20 member countries actively participating in the work in each of them, with additional observer countries and liaison to the relevant other international organizations. A brief review is given on some of the experience which has been gained by ISO/TC 85 and IEC/TC 45, and its work program and accomplishments, considering in particular recent developments. It covers nuclear safety and instrumentation, radiation protection, and the nuclear fuel cycle, as well as interface issues including definitions and terminology, interaction of the activities with the work of other national and international bodies, etc. Some problem areas are also briefly discussed. (orig.)

  20. International Safety Regulation and Standards for Space Travel and Commerce

    Science.gov (United States)

    Pelton, J. N.; Jakhu, R.

    The evolution of air travel has led to the adoption of the 1944 Chicago Convention that created the International Civil Aviation Organization (ICAO), headquartered in Montreal, Canada, and the propagation of aviation safety standards. Today, ICAO standardizes and harmonizes commercial air safety worldwide. Space travel and space safety are still at an early stage of development, and the adoption of international space safety standards and regulation still remains largely at the national level. This paper explores the international treaties and conventions that govern space travel, applications and exploration today and analyzes current efforts to create space safety standards and regulations at the national, regional and global level. Recent efforts to create a commercial space travel industry and to license commercial space ports are foreseen as means to hasten a space safety regulatory process.

  1. International physical protection standards: support for development and implementation

    International Nuclear Information System (INIS)

    Soo Hoo, M.S.

    2002-01-01

    Full text: Since 1972, the IAEA has been a recognized organization in promoting the development of international standards on the physical protection of nuclear materials. This responsibility has continued through the present in the 1999 publication of the fourth revision of INFCIRC/225, the physical protection of nuclear material and nuclear facilities and in being the repository for the convention on the physical protection of nuclear material which was originally published in 1980 as INFCIRC/274. The IAEA has also published other reference documents in support these two standards. With changing world events and greater concern for the physical protection of nuclear materials and facilities, IAEA member states have increased IAEA physical protection responsibilities. Currently, the IAEA is serving as the secretariat for drafting revisions to the physical protection convention. The proposed revisions will strengthen international physical protection standards through the incorporation of physical protection fundamentals that should apply to all nuclear materials in international or domestic use, storage and transport. Furthermore, the physical protection fundamentals would also extend to include nuclear facilities. Presently, the physical protection convention applies only to nuclear materials that are in international transport. To complement efforts to develop and promote international physical protection standards, the IAEA is actively involved in assisting member states with the implementation of the standards. This is accomplished through the delivery of training courses, workshops and hosting other international forums for the exchange of information. Through review services such as the international physical protection advisory service (IPPAS), the IAEA provides advice to member states on the application of international standards at national and facility-specific levels. These services can be followed up with technical support to implement the

  2. Internal laboratory control in residue analysis of chlorinated hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The thesis contains a chapter on gaschromatographic system in which gas current, temperatures, separation system, detector system, recorder, dosing system and integrator are described. The chapter on reagents deals with standards and solvents, absorbents and other reagents. The chapter on laboratory equipment deals with general recommendations for apparatus, purification and total numerical result of blank test. The chapter ''Methods'' contains general references, aptitude for a special problem, common investigations and control by standard reference materials. The chapter on the work up of samples treats extraction, purification, concentrating the solution, internal standard, multiple determination and control samples. The chapter on measurement presents calibration, internal standard, multiple determination, securing the result and control samples. The chapter on evaluation consists of qualitative and quantitave evaluation, decision criteria and communication of the result. The chapter of documentation described routine investigations, tests and controls of internal laboratory control, preliminary works, maintenance and service works.

  3. THE INTERNAL CONTROL MODELS IN ROMANIA

    Directory of Open Access Journals (Sweden)

    TEODORESCU CRISTIAN DRAGOȘ

    2015-06-01

    Full Text Available Internal control is indissolubly linked to business and accounting. Throughout history, domestic and international trade has grown exponentially, which has led to an increasing complexity of internal control, to new methods and techniques to control the business. The literature has presented the first models of internal control in the Sumerian period (3600 - 3200 BC, and the emergence and development of internal control in Egypt, Persia, Greek and Roman Empire, in the Middle Ages till modern times. The purpose of this article is to present the models of internal control in Romania, starting from the principles of the classical model of internal control (COSO model. For a better understanding of the implication of internal control in terms of public and private sector, I have structured the article in the following parts: (a the definition of internal control in the literature; (b the presentation of the COSO model; (c internal control and internal audit in public institutions; (d internal control issues in accounting regulations on the individual and consolidated annual financial statements; (e internal / managerial control; (f conclusions.

  4. CSNI International standard problems (ISP): brief descriptions (1975-1997)

    International Nuclear Information System (INIS)

    1997-07-01

    Over the last twenty years (1975-1999) the NEA Committee on the Safety of Nuclear Installations (CSNI) has sponsored more than forty International Standard Problems (ISPs) in the fields of in-vessel thermal-hydraulic behaviour, fuel behaviour under accident conditions, fission product release and transport, core/concrete interactions, hydrogen distribution and mixing, containment thermal-hydraulic, and iodine behaviour in the containment. ISPs are comparative exercises in which predictions of different computer codes for a given physical problem are compared with each other or with the results of a carefully controlled experimental study. The main goal of ISP exercises is to increase confidence in the validity and accuracy of analytical tools or testing procedures which are needed in warranting the safety of nuclear installations, and to demonstrate the competence of involved institutions. ISP exercises are performed as 'open' or 'blind' problems. The main characteristics of 41 ISPs completed between 1975 and 1999, and 3 containment analysis standard problems (CASPs) are briefly presented

  5. Standard methods for sampling freshwater fishes: Opportunities for international collaboration

    Science.gov (United States)

    Bonar, Scott A.; Mercado-Silva, Norman; Hubert, Wayne A.; Beard, Douglas; Dave, Göran; Kubečka, Jan; Graeb, Brian D. S.; Lester, Nigel P.; Porath, Mark T.; Winfield, Ian J.

    2017-01-01

    With publication of Standard Methods for Sampling North American Freshwater Fishes in 2009, the American Fisheries Society (AFS) recommended standard procedures for North America. To explore interest in standardizing at intercontinental scales, a symposium attended by international specialists in freshwater fish sampling was convened at the 145th Annual AFS Meeting in Portland, Oregon, in August 2015. Participants represented all continents except Australia and Antarctica and were employed by state and federal agencies, universities, nongovernmental organizations, and consulting businesses. Currently, standardization is practiced mostly in North America and Europe. Participants described how standardization has been important for management of long-term data sets, promoting fundamental scientific understanding, and assessing efficacy of large spatial scale management strategies. Academics indicated that standardization has been useful in fisheries education because time previously used to teach how sampling methods are developed is now more devoted to diagnosis and treatment of problem fish communities. Researchers reported that standardization allowed increased sample size for method validation and calibration. Group consensus was to retain continental standards where they currently exist but to further explore international and intercontinental standardization, specifically identifying where synergies and bridges exist, and identify means to collaborate with scientists where standardization is limited but interest and need occur.

  6. Employee quality, monitoring environment and internal control

    Directory of Open Access Journals (Sweden)

    Chunli Liu

    2017-03-01

    Full Text Available We investigate the effect of internal control employees (ICEs on internal control quality. Using special survey data from Chinese listed firms, we find that ICE quality has a significant positive influence on internal control quality. We examine the effect of monitoring on this result and find that the effect is more pronounced for firms with strict monitoring environments, especially when the firms implement the Chinese internal control regulation system (CSOX, have higher institutional ownership or attach greater importance to internal control. Our findings suggest that ICEs play an important role in the design and implementation of internal control systems. Our study should be of interest to both top managers who wish to improve corporate internal control quality and regulators who wish to understand the mechanisms of internal control monitoring.

  7. South African address standard and initiatives towards an international address standard

    CSIR Research Space (South Africa)

    Cooper, Antony K

    2008-10-01

    Full Text Available ; visiting friends; and providing a reference context for presenting other information. The benefits of an international address standards include: enabling address interoperability across boundaries; reducing service delivery costs; enabling development...

  8. Internationally Comparable Measures of Occupational Status for the 1988 International Standard Classification of Occupations

    NARCIS (Netherlands)

    Ganzeboom, H.B.G.; Treiman, D.J.

    1996-01-01

    This paper provides operational procedures for coding internationally comparable measures of occupational status from the recently published International Standard Classification of Occupation 1988 (ISCO88) of the International Labor Office (ILO, 1990). We first discuss the nature of the ISCO88

  9. Employee quality, monitoring environment and internal control

    OpenAIRE

    Chunli Liu; Bin Lin; Wei Shu

    2017-01-01

    We investigate the effect of internal control employees (ICEs) on internal control quality. Using special survey data from Chinese listed firms, we find that ICE quality has a significant positive influence on internal control quality. We examine the effect of monitoring on this result and find that the effect is more pronounced for firms with strict monitoring environments, especially when the firms implement the Chinese internal control regulation system (CSOX), have higher institutional ow...

  10. Manual of engineering drawing to British and international standards

    CERN Document Server

    Simmons, Colin H; Maguire, Dennis E

    2004-01-01

    The Manual of Engineering Drawing has long been recognised as the student and practising engineer's guide to producing engineering drawings that comply with ISO and British Standards. The information in this book is equally applicable to any CAD application or manual drawing. The second edition is fully in line with the requirements of the new British Standard BS8888: 2002, and will help engineers, lecturers and students with the transition to the new standards.BS8888 is fully based on the relevant ISO standards, so this book is also ideal for an international readership. The comprehen

  11. Implementation guide of internal contamination control

    International Nuclear Information System (INIS)

    Balter, Henia; Savio, Eduardo; Souto, Beatriz

    1994-01-01

    A review of current methods of contamination control for radioisotopes 131I, 125I and 99mTc, periodic control of personnel exposed to radiation.Maximum permissible body burden (Mpbb) for each radionuclide,radiotoxicity as danger of internal contamination directly related with Let, type of radiation,Ali values for various radionuclides and external irradiation as an opposed factor.Effective half life,examples, 99mTc in urine,iodine in thyroid caption, 99m Tc absorption by skin and mouth. Procedure of control and calculation by measurement of urine samples in a gamma spectrometer. Iodine thyroid caption by monitoring of thyroid with a solid NaI(TI)scintillator taking as background radiation the activity of upper leg muscle. Standard solutions are prepared to fill a thyroid phantoms.Results must not be higher than Mpbb of corresponding radionuclide.Bibliography

  12. 48 CFR 519.7014 - Internal controls.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Internal controls. 519... SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS GSA Mentor-Protégé Program 519.7014 Internal controls. (a) The GSA Mentor-Protégé Program Manager will manage the Program. Internal controls will be established by...

  13. 48 CFR 819.7112 - Internal controls.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Internal controls. 819... SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS VA Mentor-Protégé Program 819.7112 Internal controls. (a) OSDBU... Program objectives. OSDBU will establish internal controls as checks and balances applicable to the...

  14. Advancements in internationally accepted standards for radiation processing

    International Nuclear Information System (INIS)

    Farrar, H. IV; Derr, D.D.; Vehar, D.W.

    1993-01-01

    Subcommittees of the American Society for Testing and Materials (ASTM) are developing standards on various aspects of radiation processing. Nine standards on how to select and calibrate dosimeters, where to put them, how many to use, and how to use individual types of dosimeter systems have been published. The group is also developing standards on how to use gamma, electron beam, and X-ray facilities for radiation processing, and a standard on how to treat dose uncertainties. Efforts are underway to promote inclusion of these standards into procedures now being developed by government agencies and by international groups such as the United Nations' International Consultative Group on Food Irradiation (ICGFI) in order to harmonize regulations and help avoid trade barriers. Standards on good irradiation practices for meat and poultry and for fresh fruits, and for the irradiation of seafood and spices have been developed. These food-related standards are based on practices previously published by ICGFI. Standards for determining doses for radiation hardness testing of electronics have been developed. Standards on the Fricke and TLD dosimetry systems are equally useful in other radiation processing applications. (Author)

  15. 78 FR 11793 - Minimum Internal Control Standards

    Science.gov (United States)

    2013-02-20

    ... count begins, to ensure the accuracy of the equipment. (7) If a currency counter interface is used: (i.... 543.2 by adding a definition for currency cassette in alphabetical order to read as follows: Sec. 543.2 What are the definitions for this part? * * * * * Currency cassette. A locked compartment that...

  16. 77 FR 32444 - Minimum Internal Control Standards

    Science.gov (United States)

    2012-06-01

    ... definitions, add and amend existing definitions; amend the term ``variance'' as it applies to establishing an... and audit and accounting procedures into their respective sections. DATES: Submit comments on or... Commission agrees that it does not intend to limit the definition of charitable organizations to those with a...

  17. LEASE AGREEMENTS FINANCIAL REPORTING ISSUES ACCORDING TO THE INTERNATIONAL STANDARDS

    Directory of Open Access Journals (Sweden)

    Marina MAISURADZE

    2016-08-01

    Full Text Available On January 13th 2016, the Board for International Accounting Standards  published the  new International Standard 16 of Financial Reporting,   named as “Lease”, which will substitute the International Accounting Standard 17 of financial reporting “Lease”. ISFR 16 ensures reflection of practically all lease agreements in the financial reporting, which, in is part, meets the requirements of investors regarding reliability and transparency of the information related to a financial state of an enterprise. The Article considers the changes caused by ISFR 16, which relate to recognition of the lease agreements as the asset, their accounting and, impact on the financial reporting. Relevant conclusions are provided regarding the above mentioned issues.

  18. International standards for monoclonal antibodies to support pre- and post-marketing product consistency: Evaluation of a candidate international standard for the bioactivities of rituximab.

    Science.gov (United States)

    Prior, Sandra; Hufton, Simon E; Fox, Bernard; Dougall, Thomas; Rigsby, Peter; Bristow, Adrian

    2018-01-01

    The intrinsic complexity and heterogeneity of therapeutic monoclonal antibodies is built into the biosimilarity paradigm where critical quality attributes are controlled in exhaustive comparability studies with the reference medicinal product. The long-term success of biosimilars will depend on reassuring healthcare professionals and patients of consistent product quality, safety and efficacy. With this aim, the World Health Organization has endorsed the need for public bioactivity standards for therapeutic monoclonal antibodies in support of current controls. We have developed a candidate international potency standard for rituximab that was evaluated in a multi-center collaborative study using participants' own qualified Fc-effector function and cell-based binding bioassays. Dose-response curve model parameters were shown to reflect similar behavior amongst rituximab preparations, albeit with some differences in potency. In the absence of a common reference standard, potency estimates were in poor agreement amongst laboratories, but the use of the candidate preparation significantly reduced this variability. Our results suggest that the candidate rituximab standard can support bioassay performance and improve data harmonization, which when implemented will promote consistency of rituximab products over their life-cycles. This data provides the first scientific evidence that a classical standardization exercise allowing traceability of bioassay data to an international standard is also applicable to rituximab. However, we submit that this new type of international standard needs to be used appropriately and its role not to be mistaken with that of the reference medicinal product.

  19. The Nuclotron internal target control and data acquisition system

    Energy Technology Data Exchange (ETDEWEB)

    Isupov, A.Yu., E-mail: isupov@moonhe.jinr.ru [Joint Institute for Nuclear Research, Dubna 141980 (Russian Federation); Krasnov, V.A.; Ladygin, V.P.; Piyadin, S.M.; Reznikov, S.G. [Joint Institute for Nuclear Research, Dubna 141980 (Russian Federation)

    2013-01-11

    The new control system of the Nuclotron (JINR, Dubna) internal target is described in both hardware and software aspects. The CAMAC hardware is based on the use of the standard CAMAC modules developed and manufactured at JINR. The internal target control and data acquisition (IntTarg CDAQ) system software is implemented using the ngdp framework under the Unix-like operating system (OS) FreeBSD to allow easy network distribution of the online data collected from internal target and accompanying detectors, as well as the internal target remote control.

  20. EPA STANDARDS NETWORK FACT SHEET: ISO 14000: INTERNATIONAL ENVIRONMENTAL MANAGEMENT STANDARDS

    Science.gov (United States)

    This flyer provides an overview of the ISO 14000 series of International standards, supplying a brief history, structure of the Technical Committee (TC) 207, structure of the U.S. Technical Advisory Group (TAG) to ISO TC-207, status of the Standards development as of June 1997, w...

  1. International Banking Standards, Private Law, and the European Union

    DEFF Research Database (Denmark)

    Wouters, Jan; Odermatt, Jed

    2016-01-01

    This chapter seeks to provide an insight into the dynamics that take place between the EU and international standard-setting bodies, by first examining some of the features of global financial regulation which make it a unique area of global governance, then by investigating the wide variety of n...... the crisis. These reforms have been highly influenced by non-binding commitments made in informal bodies at the international level....

  2. International standards for phytosanitary measures (ISPM), publication No. 15

    CERN Multimedia

    Tom Wegelius

    2006-01-01

    GUIDELINES FOR REGULATING WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE SCOPE This standard describes phytosanitary measures to reduce the risk of introduction and/or spread of quarantine pests associated with wood packaging material (including dunnage), made of coniferous and non-coniferous raw wood, in use in international trade. For more information, contact the Shipping Service (FI-LS-SH) at 79947. Table of guidelines

  3. Domestic and International Nuclear Energy Voluntary Consensus Standards Needs

    International Nuclear Information System (INIS)

    Hopper, Calvin Mitchell

    2013-01-01

    This report introduces the reader to the domestic and international standards development organizations (SDOs) and their structures and operations. It also identifies some of the support and subject matter needs for the development of standards on the subject of nuclear energy. The support needs are described with regard to organizational structure and subject-matter-expert (SME) participation that is required for producing voluntary consensus standards. The subject matter needs are described with regard to growing technologies and objectives that approach the boundaries of existing standards; implementation of knowledge; and safety of people, facilities, and the environment. Standards are proposed, developed, and produced by SMEs with the support of industry and government organizations. The voluntary consensus standards development process is, as its name implies, a voluntary effort. The problem in today's competitive market, impacted by global economic uncertainty, is that the voluntary participation is shifting from a collaborative industry and SME effort to a nearly SME-only one. This shift places a financial and/or time burden on the SMEs to the point that they are purposely withdrawing from the standards development process, both domestically and internationally. The standards development process desperately needs participation from more and younger SMEs. The report includes several suggestions on how this can be addressed.

  4. COSO internal control integrated framework 2013

    CERN Document Server

    American Institute of Certified Public Accountants

    2013-01-01

    Issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), the 2013 Internal Control – Integrated Framework(Framework) is expected to help organizations design and implement internal control in light of many changes in business and operating environments since the issuance of the original Framework in 1992. The new Framework retains the core definition of internal control and the five components of internal control, and it continues to emphasize the importance of management judgment in designing, implementing, and conducting a system of internal control, and in assessing its effectiveness. It broadens the application of internal control in addressing operations and reporting objectives, and clarifies the requirements for determining what constitutes effective internal control.

  5. Effect of standards on new equipment design by new international standards and industry restraints

    Science.gov (United States)

    Endelman, Lincoln L.

    1991-01-01

    The use of international standards to further trade is one of the objectives of creating a standard. By having form fit and function compatible the free interchange of manufactured goods can be handled without hindrance. Unfortunately by setting up standards that are peculiar to a particular country or district it is possible to exclude competition from a group of manufacturers. A major effort is now underway to develop international laser standards. In the May I 990 issue of Laser Focus World Donald R. Johnson the director of industrial technology services for the National Institute of Standards and Technology (NIST formerly the National Bureau of Standards) is quoted as follows: " The common means of protectionism has been through certification for the market place. " The article goes on to say " Mr. Johnson expects this tradition to continue and that the new European Community (EC) will demand not just safety standards but performance standards as well. . . . the American laser industry must move very quickly on this issue or risk being left behind the European standards bandwagon. " The article continues laser companies must get involved in the actual standards negotiating process if they are to have a say in future policy. A single set of standards would reduce the need to repeatedly recalibrate products for different national markets. " As a member of ISO TC-72 SC9 I am

  6. Internal controls subjects at insurance companies

    OpenAIRE

    Прокопенко, Жанна Володимирівна

    2015-01-01

    The problematic issues of determining the authorities of the internal controls subjects at insurance companies have been elucidated. The list of internal controls subjects of insurer depending on the form of control as well as the purposefulness of such kind of control have been determined.

  7. Internationally Standardized Cost Item Definitions for Decommissioning of Nuclear Installations

    International Nuclear Information System (INIS)

    Lucien Teunckens; Kurt Pflugrad; Candace Chan-Sands; Ted Lazo

    2000-01-01

    The European Commission (EC), the International Atomic Energy Agency (IAEA), and the Organization for Economic Cooperation and Development/Nuclear Energy Agency (OECD/NEA) have agreed to jointly prepare and publish a standardized list of cost items and related definitions for decommissioning projects. Such a standardized list would facilitate communication, promote uniformity, and avoid inconsistency or contradiction of results or conclusions of cost evaluations for decommissioning projects carried out for specific purposes by different groups. Additionally, a standardized structure would also be a useful tool for more effective cost management. This paper describes actual work and result thus far

  8. Guidelines for drafting national and international seismic standards

    International Nuclear Information System (INIS)

    Podrouzek, J.

    1989-01-01

    The main principles of engineering reliability are discussed in relation to the formation of seismic standards. The basic recommendations of the International Association of Earthquake Engineering in the field of inspection and earthquake resistance evaluation of engineering structures and systems are characterized. Attention is also paid to efforts aimed at a unification of standards and regulations, based on the fact that quasistatic and response spectra methods are largely common to the standards amd regulations. However, as the potential of computer techniques increases, more complex computer programs appear and the amount of tenuous input data increases, and this can affect the quality of seismic inspections. (Z.M.). 5 figs., 1 ref

  9. 77 FR 33811 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

    Science.gov (United States)

    2012-06-07

    ... 63 National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines; New Source Performance Standards for Stationary Internal Combustion Engines; Proposed Rule #0;#0... Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines; New Source...

  10. 77 FR 37361 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

    Science.gov (United States)

    2012-06-21

    ... National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines; New Source Performance Standards for Stationary Internal Combustion Engines AGENCY: Environmental Protection... Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines; New Source Performance...

  11. Electrical, instrumentation, and control codes and standards

    International Nuclear Information System (INIS)

    Kranning, A.N.

    1978-01-01

    During recent years numerous documents in the form of codes and standards have been developed and published to provide design, fabrication and construction rules and criteria applicable to instrumentation, control and power distribution facilities for nuclear power plants. The contents of this LTR were prepared by NUS Corporation under Subcontract K5108 and provide a consolidated index and listing of the documents selected for their application to procurement of materials and design of modifications and new construction at the LOFT facility. These codes and standards should be applied together with the National Electrical Code, the ID Engineering Standards and LOFT Specifications to all LOFT instrument and electrical design activities

  12. Internal quality control: best practice.

    Science.gov (United States)

    Kinns, Helen; Pitkin, Sarah; Housley, David; Freedman, Danielle B

    2013-12-01

    There is a wide variation in laboratory practice with regard to implementation and review of internal quality control (IQC). A poor approach can lead to a spectrum of scenarios from validation of incorrect patient results to over investigation of falsely rejected analytical runs. This article will provide a practical approach for the routine clinical biochemistry laboratory to introduce an efficient quality control system that will optimise error detection and reduce the rate of false rejection. Each stage of the IQC system is considered, from selection of IQC material to selection of IQC rules, and finally the appropriate action to follow when a rejection signal has been obtained. The main objective of IQC is to ensure day-to-day consistency of an analytical process and thus help to determine whether patient results are reliable enough to be released. The required quality and assay performance varies between analytes as does the definition of a clinically significant error. Unfortunately many laboratories currently decide what is clinically significant at the troubleshooting stage. Assay-specific IQC systems will reduce the number of inappropriate sample-run rejections compared with the blanket use of one IQC rule. In practice, only three or four different IQC rules are required for the whole of the routine biochemistry repertoire as assays are assigned into groups based on performance. The tools to categorise performance and assign IQC rules based on that performance are presented. Although significant investment of time and education is required prior to implementation, laboratories have shown that such systems achieve considerable reductions in cost and labour.

  13. International financial reporting standards and foreign ownership in ...

    African Journals Online (AJOL)

    Previous literature suggests that the adoption of International Financial Reporting Standards (IFRS) can facilitate cross-border capital flows, as it results in an increase in market liquidity and comparability benefits. Using foreign ownership levels in South African listed companies during the period 2003 to 2007, we test ...

  14. How to Integrate International Financial Reporting Standards into Accounting Programs

    Science.gov (United States)

    Singer, Robert A.

    2012-01-01

    It is expected the SEC will require U.S. domestic companies to prepare and file their annual 10Ks in accordance with international financial reporting standards (IFRS) by 2016. Given the probability that the FASB-IASB convergence project (i.e., Norwalk Agreement) will continue subsequent to mandatory adoption, US accounting programs will be…

  15. Effects of national accounting standards convergence to international accounting standards on foreign direct investment

    Directory of Open Access Journals (Sweden)

    Asieh Farazandehnia

    2015-09-01

    Full Text Available One of the most important factors on attracting foreign investors to invest on Tehran Stock Exchange is to have transparent accounting rules and regulations. When there are some consistency between national accounting standards and international accounting standards, we may, at least, expect foreign investors to have better understanding on financial statements. In 2006, there were some changes on Iranian national accounting standards in an attempt to make them closer to international accounting standards. In this study, we select the information of 153 firms five years before and after this regulation and study the effect of convergence from national accounting standards to international accounting standards on foreign direct investment. Using some statistical tests, the study has determined that there was no meaningful relationship between foreign direct investment before and after change on accounting standards. In addition, there was no difference on the information quality before and after change on accounting standards. However, there was some meaningful relationship between the information quality and foreign direct investment.

  16. International collaborative study for the calibration of proposed International Standards for thromboplastin, rabbit, plain, and for thromboplastin, recombinant, human, plain.

    Science.gov (United States)

    van den Besselaar, A M H P; Chantarangkul, V; Angeloni, F; Binder, N B; Byrne, M; Dauer, R; Gudmundsdottir, B R; Jespersen, J; Kitchen, S; Legnani, C; Lindahl, T L; Manning, R A; Martinuzzo, M; Panes, O; Pengo, V; Riddell, A; Subramanian, S; Szederjesi, A; Tantanate, C; Herbel, P; Tripodi, A

    2018-01-01

    Essentials Two candidate International Standards for thromboplastin (coded RBT/16 and rTF/16) are proposed. International Sensitivity Index (ISI) of proposed standards was assessed in a 20-centre study. The mean ISI for RBT/16 was 1.21 with a between-centre coefficient of variation of 4.6%. The mean ISI for rTF/16 was 1.11 with a between-centre coefficient of variation of 5.7%. Background The availability of International Standards for thromboplastin is essential for the calibration of routine reagents and hence the calculation of the International Normalized Ratio (INR). Stocks of the current Fourth International Standards are running low. Candidate replacement materials have been prepared. This article describes the calibration of the proposed Fifth International Standards for thromboplastin, rabbit, plain (coded RBT/16) and for thromboplastin, recombinant, human, plain (coded rTF/16). Methods An international collaborative study was carried out for the assignment of International Sensitivity Indexes (ISIs) to the candidate materials, according to the World Health Organization (WHO) guidelines for thromboplastins and plasma used to control oral anticoagulant therapy with vitamin K antagonists. Results Results were obtained from 20 laboratories. In several cases, deviations from the ISI calibration model were observed, but the average INR deviation attributabled to the model was not greater than 10%. Only valid ISI assessments were used to calculate the mean ISI for each candidate. The mean ISI for RBT/16 was 1.21 (between-laboratory coefficient of variation [CV]: 4.6%), and the mean ISI for rTF/16 was 1.11 (between-laboratory CV: 5.7%). Conclusions The between-laboratory variation of the ISI for candidate material RBT/16 was similar to that of the Fourth International Standard (RBT/05), and the between-laboratory variation of the ISI for candidate material rTF/16 was slightly higher than that of the Fourth International Standard (rTF/09). The candidate materials

  17. Internal combustion engine and method for control

    Science.gov (United States)

    Brennan, Daniel G

    2013-05-21

    In one exemplary embodiment of the invention an internal combustion engine includes a piston disposed in a cylinder, a valve configured to control flow of air into the cylinder and an actuator coupled to the valve to control a position of the valve. The internal combustion engine also includes a controller coupled to the actuator, wherein the controller is configured to close the valve when an uncontrolled condition for the internal engine is determined.

  18. ASTM International Workshop on Standards & Measurements for Tissue Engineering Scaffolds

    Science.gov (United States)

    Simon, Carl G.; Yaszemski, Michael J.; Ratcliffe, Anthony; Tomlins, Paul; Luginbuehl, Reto; Tesk, John A.

    2016-01-01

    The “Workshop on Standards & Measurements for Tissue Engineering Scaffolds” was held on May 21, 2013 in Indianapolis, IN and was sponsored by the ASTM International (ASTM). The purpose of the workshop was to identify the highest priority items for future standards work for scaffolds used in the development and manufacture of tissue engineered medical products (TEMPs). Eighteen speakers and 78 attendees met to assess current scaffold standards and to prioritize needs for future standards. A key finding was that the ASTM TEMPs subcommittees (F04.41-46) have many active “guide” documents for educational purposes, but that few standard “test methods” or “practices” have been published. Overwhelmingly, the most clearly identified need was standards for measuring the structure of scaffolds, followed by standards for biological characterization, including in vitro testing, animal models and cell-material interactions. The third most pressing need was to develop standards for assessing the mechanical properties of scaffolds. Additional needs included standards for assessing scaffold degradation, clinical outcomes with scaffolds, effects of sterilization on scaffolds, scaffold composition and drug release from scaffolds. Discussions also highlighted the need for additional scaffold reference materials and the need to use them for measurement traceability. Finally, dialogue emphasized the needs to promote the use of standards in scaffold fabrication, characterization, and commercialization and to assess the use and impact of standards in the TEMPs community. Many scaffold standard needs have been identified and focus should now turn to generating these standards to support the use of scaffolds in TEMPs. PMID:25220952

  19. Problems of introduction of international standards of conscientious state financial management in Ukrainian practice

    OpenAIRE

    Anhelina, I.

    2014-01-01

    The m aintenance of the INTOSAI GOV standardssystem, which show by itself guidance from a conscientious state financial management in the field of internal control and standards of record-keeping, is generalized. The directions of the use of risk and control model COSO are determinated for the financial management of state sector in part of authentication of sources of risk, aims and duties of organization. The measures are worked out on introduction of standards of INTOSAI GOVand models of C...

  20. Language standardization in sociolinguistics and international business: Theory and practice across the table

    DEFF Research Database (Denmark)

    Linn, Andrew; Sanden, Guro Refsum; Piekkari, Rebecca

    2018-01-01

    Haugen to explain the history of modern Norwegian. The table is then turned and a model from international business by Piekkari, Welch and Welch is used to illuminate recent Norwegian language planning. It is found that the Grundfos case works well with the Haugen model, and the international business......This chapter addresses the issue of language standardization from two perspectives, bringing together a theoretical perspective offered by the discipline of sociolinguistics with a practical example from international business. We introduce the broad concept of standardization and embed the study...... of language standardization in the wider discussion of standards as a means of control across society. We analyze the language policy and practice of the Danish multinational, Grundfos, and use it as a “sociolinguistic laboratory” to “test” the theory of language standardization initially elaborated by Einar...

  1. International trade with peat and peat products - a challenge to international standardization

    Energy Technology Data Exchange (ETDEWEB)

    Schmilewski, G; Guenther, J [Institut fuer Torf- und Humusforschung GmbH (ITH), Bad Zwischenahn (Germany, F.R.)

    1990-01-01

    On a worldwide scale raised bog peat is the most important basic material for the production of growing media. Peat has greatly contributed to the realization of modern, standardized and even computer-controlled growing techniques in commercial horticulture. No other material can truly compete with the outstanding physical, chemical and biological properties of peat. All present and future substitutes will have to stand comparison with peat. Nonetheless, many other organic, mineral and synthetic materials are use in horticulture mainly to adjust the physical properties of growing media to new growing methods. As a direct or indirect consequence thereof, the spared raw material peat is a fact which is considered progressive in industrial countries strongly characterized by nature conservational ideas also. Some peat consuming countries do not have any indigenous peat resources and meet their demands with imports. Other countries, such as the Fed. Rep. of Germany, the Scandinavian countries and the USSR export considerable amounts of peat and peat products. International transactions have not only increased for big industries, but also for the peat industry. For the grower and for the producer of growing media alike, the knowledge of growing media properties are of fundamental importance. Various standard methods for the analysis of peat and growing media have been developed by national organizations and are being used just as manifold. In some cases national standards have derived from these.

  2. An overview of prisons, prisoners and international human rights standards

    Directory of Open Access Journals (Sweden)

    Andrew Coyle

    2012-07-01

    Full Text Available This article examines the principal international human rights standards that exist for the treatment of prisoners. Given the increase in the use of  imprisonment in many countries, the administration of prisons poses certain challenges. The author addresses this issue by first examining the purposes of imprisonment, which is the only way to evaluate if the penitentiary system is achieving the goals that have been set for it. The author then analyzes five elements that must be taken into account when complying with international standards regarding the treatment of prisoners: living conditions for prisoners; the contact that prisoners have with their families and other persons; special conditions that apply to incarcerated persons according to specific situations (gender, nationality, age, illness, etc.; prison personnel and independent oversight of prisons. In the end, what all of these  standards have in common is the importance of upholding human dignity when dealing with incarcerated persons.

  3. Developing and enforcing internal information systems standards: InduMaker’s Standards Management Process

    Directory of Open Access Journals (Sweden)

    Claudia Loebbecke

    2016-01-01

    Full Text Available It is widely agreed that standards provide numerous benefits when available and enforced. Company-internal Information Systems (IS management procedures and solutions, in the following coined IS ‘standards’, allow for harmonizing operations between company units, locations and even different service providers. However, many companies lack an organized process for defining and managing internal IS standards, which causes uncertainties and delays in decision making, planning, and design processes. In this case study of the globally operating InduMaker (anonymized company name, an established manufacturing supplier, we look into the company-internal management of IS standards. Theoretically grounded in the organizational and IS-focused literature on business process modelling and business process commoditization, we describe and investigate InduMaker’s newly developed Standard Management Process (SMP for defining and managing company-internal business and IS standards, with which the multinational pursues offering clear answers to business and IT departments about existing IS standards, their degree of obligation, applicability, and scope at any time.

  4. Seminar on standards, standardization, quality control and interlaboratory test programmes

    Energy Technology Data Exchange (ETDEWEB)

    de Bievre, P. [Central Bureau for Nuclear Measurements, Geel (Belgium)

    1978-12-15

    The author gives a resume on the proper use of standards and standardization of measurement procedures. Results of measurements obtained on the same instrument and on the same series of standards of different isotopic compositions are displayed.

  5. International standardization of nuclear reactor designs - the way forward

    International Nuclear Information System (INIS)

    Raetzke, Christian

    2010-01-01

    The concept of 'International Standardization of Nuclear Reactor Designs' means that vendors could build their designs in every country without having to adapt it specifically to national safety requirements. Such standardization would have two main effects. It would greatly facilitate nuclear new build worldwide by giving greater efficiency and certainty to the national licensing procedures; by taking into account the fact that vendors, and nowadays also utilities, are active across borders; by helping developing countries to establish their nuclear new build programmes; and by reducing the strain on human resources on both the regulators' and the industry's side. The second valuable effect of standardization would be to further enhance safety by improving the exchange of construction and operating experience among a number of reactors belonging to fleets of the same design. The World Nuclear Association's CORDEL (Cooperation in Reactor Design Evaluation and Licensing) Group has developed a concept for implementation of international standardization of reactor designs. It has defined a number of steps to be taken by industry. At the same time, possibilities offered by national and international regulatory mechanisms would have to be fully made use of, and some changes in regulatory frameworks might be necessary. Some steps especially towards greater cooperation of regulators have already been taken; however, much still remains to be done. The concept of deploying standardized reactor designs across a number of countries supposes an alignment and, if possible, harmonization of national safety standards; a streamlining of national licensing procedures, making them more efficient and predictable; and the willingness of national regulators to take into account licensing done in other countries. In the end, this should lead to a mutual acceptance of design approvals or, in a more distant future, even to a multinational design approval process. All in all, the concept

  6. International Reserves Crises, Monetary Integration and the Payments System during the International Gold Standard

    OpenAIRE

    Paula Hernandez-Verme

    2009-01-01

    I model an international payments system with a financial center and periphery to reproduce various aspects of the International Gold Standard. This period was characterized by frequent crises associated with scarce stocks of reserves, high short-term interest rates with subsequent gold inflows and transmission of output contractions across countries. I find that a common international currency and no legal restrictions on exchange help the periphery share reserves with the financial center, ...

  7. A robust standard deviation control chart

    NARCIS (Netherlands)

    Schoonhoven, M.; Does, R.J.M.M.

    2012-01-01

    This article studies the robustness of Phase I estimators for the standard deviation control chart. A Phase I estimator should be efficient in the absence of contaminations and resistant to disturbances. Most of the robust estimators proposed in the literature are robust against either diffuse

  8. International consensus principles for ethical wildlife control.

    Science.gov (United States)

    Dubois, Sara; Fenwick, Nicole; Ryan, Erin A; Baker, Liv; Baker, Sandra E; Beausoleil, Ngaio J; Carter, Scott; Cartwright, Barbara; Costa, Federico; Draper, Chris; Griffin, John; Grogan, Adam; Howald, Gregg; Jones, Bidda; Littin, Kate E; Lombard, Amanda T; Mellor, David J; Ramp, Daniel; Schuppli, Catherine A; Fraser, David

    2017-08-01

    Human-wildlife conflicts are commonly addressed by excluding, relocating, or lethally controlling animals with the goal of preserving public health and safety, protecting property, or conserving other valued wildlife. However, declining wildlife populations, a lack of efficacy of control methods in achieving desired outcomes, and changes in how people value animals have triggered widespread acknowledgment of the need for ethical and evidence-based approaches to managing such conflicts. We explored international perspectives on and experiences with human-wildlife conflicts to develop principles for ethical wildlife control. A diverse panel of 20 experts convened at a 2-day workshop and developed the principles through a facilitated engagement process and discussion. They determined that efforts to control wildlife should begin wherever possible by altering the human practices that cause human-wildlife conflict and by developing a culture of coexistence; be justified by evidence that significant harms are being caused to people, property, livelihoods, ecosystems, and/or other animals; have measurable outcome-based objectives that are clear, achievable, monitored, and adaptive; predictably minimize animal welfare harms to the fewest number of animals; be informed by community values as well as scientific, technical, and practical information; be integrated into plans for systematic long-term management; and be based on the specifics of the situation rather than negative labels (pest, overabundant) applied to the target species. We recommend that these principles guide development of international, national, and local standards and control decisions and implementation. © 2017 The Authors. Conservation Biology published by Wiley Periodicals, Inc. on behalf of Society for Conservation Biology.

  9. International implications of nuclear Q.A. standards

    International Nuclear Information System (INIS)

    Stoddart, D.E.

    1976-01-01

    The work of the International Atomic Energy Agency (I.A.E.A.) in the field of Quality Assurance is aimed at preparing a Code of Practice covering recommendations on safety aspects only which is designed to be usable by all nations. This Code is followed up by a series of Safety Guides as aids to developing nations faced with the need to regulate and assure safety, reliability and quality. The I.A.E.A. Code is not written as a mandatory document and it can only recommend and therefore the term 'should' is used throughout. The International Organization for Standardization (I.S.O.) is concerned with producing standards and as such the proposed I.S.O. draft standard on 'Quality Assurance for Nuclear Power Plants' is written in mandatory language, it uses the word 'shall'. The I.S.O. standard will also cover not only safety aspects but also those of a successfully operating nuclear power plant. The I.S.O. Working Group is charged with producing standards on quality assurance covering the design, procurement, fabrication, construction, operation, maintenance and decommissioning of structure, systems and components of nuclear power plants. The work of both organizations is discussed briefly. (author)

  10. KUALITAS INFORMASI AKUNTANSI PADA TAHAP KONVERGENSI INTERNATIONAL FINANCIAL REPORTING STANDARD

    Directory of Open Access Journals (Sweden)

    I Putu Fery Karyada

    2017-08-01

    Full Text Available Abstract: Accounting Information Quality in Convergence International Financial Reporting Standard (IFRS. This study aims to examine the differences of accounting information quality in the IFRS convergence. The method used in this research is multiple regression analysis in non banking and finance companies in 2012-2014. The research shows that overall application of IFRS tended to reduce the quality of accounting information. This research finds that overall application of IFRS tends to reduce the quality of accounting information. This occurs because the differences of IFRS with existing standards, weak law enforcement, and a lack of manager incentives. This result can be an input for various parties in making policy.

  11. How Do Firms Comply with International Sustainability Standards?

    DEFF Research Database (Denmark)

    Vigneau, Laurence; Humphreys, Michael; Moon, Jeremy

    2015-01-01

    This paper addresses the issue of the influence of global governance institutions, particularly international sustainability standards, on a firm’s intra-organizational practices. More precisely, we provide an exploratory empirical view of the impact of the Global Reporting Initiative (GRI......, the relationships between subsidiaries, the temporal dimension of CSR management and the interpretation of CSR performance. We also highlight the need to look at the relationship dynamics (or lack of) between standards. Finally, we illustrate and discuss the role of reporting and its influence on management...

  12. AUTOMATION OF THE SYSTEM OF INTERNAL LABORATORY QUALITY CONTROL

    Directory of Open Access Journals (Sweden)

    V. Z. Stetsyuk

    2015-05-01

    Full Text Available Quality control system base d on the principles of standardi zation of all phases of laboratory testing and analysis of internal laboratory quality control and external quality assessment. For the detection accuracy of the results of laboratory tests, carried out internally between the laboratory and laboratory quality control. Under internal laboratory quality control we understand measurement results of each analysis in each anal ytical series rendered directly in the lab every day. The purpose of internal laboratory control - identifying and eliminating unacceptable deviations from standard perfor mance test in the laboratory, i.e. identifying and eliminating harmful analytical errors. The solutions to these problems by implementing automated systems - software that allows you to optimize analytical laboratory research stage of the procedure by automatically creating process control charts was shown.

  13. Finite element analyses for Seismic Shear Wall International Standard Problem

    International Nuclear Information System (INIS)

    Park, Y.; Hofmayer, C.; Chokshi, N.

    1997-01-01

    In the seismic design of shear wall structures, e.g., nuclear reactor buildings, a linear FEM analysis is frequently used to quantify the stresses under the design loading condition. The final design decisions, however, are still based on empirical design rules established over decades from accumulated laboratory test data. This paper presents an overview of the state-of-the-art on the application of nonlinear FEM analysis to reinforced concrete (RC) shear wall structures under severe earthquake loadings based on the findings obtained during the Seismic Shear Wall International Standard Problem (SSWISP) Workshop in 1996. Also, BNL's analysis results of the International Standard Problem (ISP) shear walls under monotonic static, cyclic static and dynamic loading conditions are described

  14. INTERNATIONAL STANDARDS FOR FINANCIAL REPORTING: HARMONIZATION IN MACEDONIA

    Directory of Open Access Journals (Sweden)

    Sasho Kozuharov

    2015-12-01

    Full Text Available A continuous flow of reliable, relevant and financially important information is necessary for making economically justified and strategic investment decisions. Economic globalization has contributed to the need of creating a unified language for communication, a single set of international financial reporting standards with the sole purpose of enhancing transparency for investors and reducing the cost of capital. Harmonization of financial reporting provides more efficient use of global resources, easier consolidation of multinational companies foreign subsidiaries, alleviation of accounting staff mobility and reducing of audit costs. The research is based on the benefits that the national economy can gain if the international financial reporting standards are successfully implemented. Special attention in the paper is devoted to the factors that determine the harmonization of financial reporting. The analysis of the results show the managers' perception of financial reporting, and emphasize the effects of the implementation of IFRS in Republic of Macedonia.

  15. Regulatory practices and standards: the international scene and trends

    International Nuclear Information System (INIS)

    Vinck, W.; Essler, W.; Maurer, H.A.; Reijen, G. van.

    1978-01-01

    At national level, codification of standards governing the licensing and operation of nuclear installations is very different, ranging from criteria to regulations, according to the degree of the obligation imposed by national authorities; it also reflects the variety of national situations and the peculiarities of the legal and political systems. The need to agree upon a level of nuclear safety which is generally recognised as satisfactory and to exchange scientific and technological information in this field has greatly stimulated international co-operation, in particular within the framework of specialized international organisations such as IAEA, ISO, Euratom and OECD/NEA. Harmonization of such standards is particularly important from the viewpoint of public opinion in the countries concerned. In addition, the intrinsic safety of nuclear power plants, assurances as to the duration of plant life should increasingly be highlighted in future. (NEA) [fr

  16. Internal Temperature Control For Vibration Testers

    Science.gov (United States)

    Dean, Richard J.

    1996-01-01

    Vibration test fixtures with internal thermal-transfer capabilities developed. Made of aluminum for rapid thermal transfer. Small size gives rapid response to changing temperatures, with better thermal control. Setup quicker and internal ducting facilitates access to parts being tested. In addition, internal flows smaller, so less energy consumed in maintaining desired temperature settings.

  17. Analysing public relations education through international standards: The Portuguese case

    OpenAIRE

    Gonçalves, Gisela Marques Pereira; Spínola, Susana de Carvalho; Padamo, Celma

    2013-01-01

    By using international reports on PR education as a benchmark we analyse the status of PR higher education in Portugal. Despite differences among the study programs, the findings reveal that the standard five courses recommendation by the Commission on Public Relations Education (CPRE) are a part of Portuguese undergraduate curriculum. This includes 12 of the 14 content field guidelines needed to achieve the ideal master's program. Data shows, however, the difficulty of positioning public rel...

  18. International standards for financial reporting: Harmonization in Macedonia

    OpenAIRE

    Kozuharov, Sasho; Ristovska, Natasha; Blazeska, Daliborka

    2015-01-01

    A continuous flow of reliable, relevant and financially important information is necessary for making economically justified and strategic investment decisions. Economic globalization has contributed to the need of creating a unified language for communication, a single set of international financial reporting standards with the sole purpose of enhancing transparency for investors and reducing the cost of capital. Harmonization of financial reporting provides more efficient use of...

  19. International standardization of instruments for neutron irradiation tests

    International Nuclear Information System (INIS)

    Tanimoto, Masataka; Shibata, Akira; Nakamura, Jinichi; Tsuchiya, Kunihiko; Cho, M.; Lee, C.; Park, S.; Choo, K.

    2012-01-01

    The JMTR in JAEA and HANARO in KAERI are the foremost testing/research reactors in the world and these are expected to contribute to many nuclear fields. As a part of instrument development in irradiation field, information exchange of instruments started from 2010 under the cooperation agreements between KAERI and JAEA. The instruments developed in JMTR and HANARO are introduced and cooperation experiments as future plan are discussed for international standardization. (author)

  20. Housekeeping Genes as Internal Standards: Use and Limits

    OpenAIRE

    Thellin, Olivier; Zorzi, Willy; Lakaye, Bernard; De Borman, B.; Coumans, Bernard; Hennen, Georges; Grisar, Thierry; Igout, Ahmed; Heinen, Ernst

    1999-01-01

    Quantitative studies are commonly realised in the biomedical research to compare RNA expression in different experimental or clinical conditions. These quantifications are performed through their comparison to the expression of the housekeeping gene transcripts like glyceraldehyde-3-phosphate dehydrogenase (G3PDH), albumin, actins, tubulins, cyclophilin, hypoxantine phsophoribosyltransferase (HRPT), L32. 28S, and 18S rRNAs are also used as internal standards. In this paper, it is recalled tha...

  1. International Standards for Radiation Sterilization of Medical Devices

    International Nuclear Information System (INIS)

    Miller, A.

    2007-01-01

    For a terminally sterilized medical device to be designated '' STERILE '', probability of finding the viable micro-organisms in the device shall be equal to or less than 1 x 10 -6 (EN 556-1:2001: Sterilization of medical devices - Requirements for medical devices to be designated '' STERILE '' - Part 1: Requirements for terminally sterilized medical devices). Author presents the main legal aspects of the international standards for radiation sterilization of medical devices

  2. International collaborative study for the calibration of proposed International Standards for thromboplastin, rabbit, plain and for thromboplastin, recombinant, human, plain

    DEFF Research Database (Denmark)

    van den Besselaar, A M H P; Chantarangkul, V; Angeloni, F

    2018-01-01

    BACKGROUND: The availability of International Standards for thromboplastin is essential for the calibration of routine reagents and hence the calculation of the International Normalized Ratio (INR). Stocks of the current 4(th) International Standards are running low. Candidate replacement materia......) international standard (rTF/09). The candidate materials have been accepted by WHO as the 5(th) International Standards for thromboplastin, rabbit plain, and thromboplastin, recombinant, human, plain. This article is protected by copyright. All rights reserved.......BACKGROUND: The availability of International Standards for thromboplastin is essential for the calibration of routine reagents and hence the calculation of the International Normalized Ratio (INR). Stocks of the current 4(th) International Standards are running low. Candidate replacement materials...... have been prepared. This report describes the calibration of the proposed 5(th) International Standards for thromboplastin, rabbit, plain (coded RBT/16) and for thromboplastin, recombinant, human, plain (coded rTF/16). METHODS: An international collaborative study was carried out for the assignment...

  3. The Inclusion of Standard Terms in International Sales Contracts

    Directory of Open Access Journals (Sweden)

    S Eiselen

    2011-04-01

    Full Text Available The problem dealing with the inclusion of standard terms and conditions in contracts is a problem that has engaged most legal systems. The United Nations Convention on Contracts for the International Sale of Goods, Vienna 1980 (CISG does not expressly deal with this problem. Accordingly the solution to the issue must be found in an interpretation and application of the general principles found in articles 8, 14 and 18. One of the main objects of the CISG is the harmonisation of international trade law. It is generally recognised that in order to achieve harmonisation it isnecessary that courts should interpret and apply the convention in a consistent and harmonious manner. Unfortunately a number of approaches have emerged from courts around the world in regard to the inclusion of standard terms. German courts have developed a strict approach which requires that the standard terms be madeavailable to the addressee at the time of the conclusion of the contract. They also require that the standard terms be couched in the language of the main contract. In stark contrast an American court has used an approach which is very lax in regard to incorporation, even allowing incorporation after the conclusion of the contract. There is, however a more moderate approach set out in decisions of the Austrian Supreme Court where the court adopted an approach which is more akin to that found in most legal systems, namely that a clear incorporation clause in the contract is sufficient for the effective incorporation of standard terms. The author critically examines the case law, the various approaches and the underlying arguments on which they are based, before reaching the conclusion that the two extreme approaches should be rejected in favour of the more moderate approach. This approach is founded on aproper interpretation of the provisions of the CISG as well as being in step with international trade practice.

  4. Nuclear data standards - International Evaluation Co-operation volume 7

    International Nuclear Information System (INIS)

    Carlson, A.D.; Shibata, K.; Vonach, H.; Hambsch, F.J.; Chen, Z.; Hofmann, H.M.; Oh, S.Y.; Badikov, S.A.; Gai, E.V.; Pronyaev, V.G.; Smith, D.L.; Hale, G.M.; Kawano, T.; Larson, N.M.

    2006-01-01

    A Working Party on International Evaluation Co-operation was established under the sponsorship of the OECD/NEA Nuclear Science Committee (NSC) to promote the exchange of information on nuclear data evaluations, validation and related topics. Its aim is also to provide a framework for co-operative activities between members of the major nuclear data evaluation projects. This includes the possible exchange of scientists in order to encourage co-operation. Requirements for experimental data resulting from this activity are compiled. The working party determines common criteria for evaluated nuclear data files with a view to assessing and improving the quality and completeness of evaluated data. The parties to the project are: ENDF (United States), JEFF/EFF (NEA Data Bank member countries) and JENDL (Japan). Co-operation with evaluation projects of non-OECD countries is organised through the Nuclear Data Section of the International Atomic Energy Agency (IAEA). This report was issued by Subgroup 7, which was in charge of producing new evaluated neutron cross-section standards. When starting the project, there was a general consensus on the need to update these standards, as significant improvements had been made to the experimental database since 1991 when the last evaluation of these standards was performed. The present work was accomplished through efficient collaboration between a task force of the US Cross-section Evaluation Working Group (CSEWG), a Co-ordinated Research Project (CRP) of the International Atomic Energy Agency (IAEA) and Subgroup 7 of the Working Party on International Evaluation Co-operation (WPEC) of the NEA Nuclear Science Committee. Work is reported on the results of an international effort to evaluate the neutron cross-section standards. The evaluations include the H(n,n), 6 Li(n,t), 10 B(n,α), 10 B(n,α1γ), 197 Au(n,γ), 235 U(n,f) and 238 U(n,f) standard reactions. Evaluations were also produced for the non-standard 238 U(n,γ) and 239 Pu

  5. The new international standard ISO 14001: 2004 environmental management system

    International Nuclear Information System (INIS)

    Oheba, Jamal Basher

    2006-01-01

    ISO 14001 is one standard in the ISO 14000 series of standards developed by International Organization of Standardization (ISO). Since it was published in 19096, it has rapidly become the most important environmental standard in the world. ISO 14001 is an environmental management system (EMS) that can be classified into environmental technologies provides a systematic procedure to all kind of organizations to prevent pollutions, protect environment and to improve their overall environmental performance. This new standard ISO 14001 2004 was published on November 15, 2004. It cancels and replaced the old ISO 14001-1996. Because the important of the previous standard for our local industries, firms, ...etc, this paper presents ISO 14001 concepts, issues, benefits and focuses on the stages of implementation to achieve ISO 14001-2004 certification which includes general requirements environmental policy, planning (objectives, targets ..), implementation and operations, checking and management review ...etc and presents how to apply isotop time saver software to design records, and to save time to implement ISO 14001 2004 and finally a conclusion is provided.(Author)

  6. International standards: the World Organisation for Animal Health Terrestrial Animal Health Code.

    Science.gov (United States)

    Thiermann, A B

    2015-04-01

    This paper provides a description of the international standards contained in the TerrestrialAnimal Health Code of the World Organisation for Animal Health (OIE) that relate to the prevention and control of vector-borne diseases. It identifies the rights and obligations of OIE Member Countries regarding the notification of animal disease occurrences, as well as the recommendations to be followed for a safe and efficient international trade of animals and their products.

  7. Development of an international standard on instruments setpoints based on ISA S67.04 - 1994

    International Nuclear Information System (INIS)

    Quinn, E.L.

    1996-01-01

    This is a summary of the application for and development of an international standard on instrument setpoints, based on the Instrument Society of America (ISA) Standard S67.04 - 1994. The forum this new standard was proposed in is the International Electrotechnique Commission (IEC), based in Geneva, Switzerland, which is the international commission which oversees electrical and instrumentation standards for all applications around the world. The Instrument Society of America (ISA) is a United States based Society for the advancement of instrumentation and controls related science and technology and has 30,000 members. A division within the ISA is the Standard and Practices board which has over 5000 members actively involved in standards development and approval. In 1994, the ISA SP67, Nuclear Power Plant Standards Committee authorized that the IEC be approached to develop and issue an IEC standard on Instrument Setpoints. This application was formally submitted in January, 1995 to the IEC and approved for ballot to member countries in June, 1995. Approval for standard development by IEC was received in October, 1995 and the first draft vas issued in February, 1996, and is currently under review by the IEC working group. It is very important to focus on the approach that the U.S. and other countries are taking toward development of IEC standards that can apply to all nuclear instrumentation applications around the world. By referencing IEC standards in design specification, vendors can be solicited from many different countries, thereby ensuring that the highest quality products can be used. This also offsets the need to specify individual standards in the specification, based on the country that each vendor solicited, represents. In summary, this standard development process, with support from the American National Standards Institute (ANSI) will assist U.S. suppliers in competing in the global market for products and services into the next century. (author)

  8. 77 FR 60341 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

    Science.gov (United States)

    2012-10-03

    ... National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines; New Source Performance Standards for Stationary Internal Combustion Engines AGENCY: Environmental Protection... Pollutants for Stationary Reciprocating Internal Combustion Engines to solicit comment on specific issues...

  9. 78 FR 54606 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

    Science.gov (United States)

    2013-09-05

    ... Combustion Engines; New Source Performance Standards for Stationary Internal Combustion Engines AGENCY... hazardous air pollutants for stationary reciprocating internal combustion engines and the standards of performance for stationary internal combustion engines. Subsequently, the EPA received three petitions for...

  10. Efficacy of internal control and controlling business risks

    OpenAIRE

    IONESCU, Luminiţa

    2010-01-01

    Companies can gain additional efficiency in designing and implementing or assessing internal control by focusing on only those financial reporting objectives directly applicable to the company’s activities and circumstances, taking a risk based approach to internal control. It is important for any organization to have reliable financial data for internal decision-making purpose. Financial information is often useful in many internal decisions such as product or service pricing. This is why th...

  11. COMPETITIVE ADVANTAGES THROUGH THE IMPLEMENTATION OF INTERNATIONAL ENERGY MANAGEMENT STANDARDS

    Directory of Open Access Journals (Sweden)

    PALIEKHOVA L. L.

    2016-03-01

    Full Text Available Purpose. The purpose of the presented research is to explore the potential of international energy management standards to increase competitiveness of industrial enterprises under conditions of Ukrainian transitional economy. The study had the following objectives: to trace the evolution of fundamental energy efficiency standards; to discuss experience in their use in various countries; to identify factors that are key to achieving competitive advantage under the implementation ISO 50001. Methodology. This article presents a historical overview of the standardisation of principles and approaches for the purpose of the energy-efficient management. The research was carried out by studying the international documents, voluntary standards and national practices in the field of energy efficiency. Conclusions. The study examines the experiences of different countries in the field of energy management systems. The authors conducted a comparative analysis of the ISO 50001 with the other basic standards for the organisation of management. The system approach enables to identify the main factors and their impact on capacity to achieve competitive advantages, which are possible to obtain after certification to ISO 50001. Originality. The study reviewed and analysed the energy management penetration within its dynamics at time and country level. After analysing the statistical data and the results of the interviews, the authors identified 20 key factors affecting the competitiveness of enterprises that are certified to ISO 50001. All of these factors were divided into four groups, two groups represent external environment – opportunities and threats, and two groups – internal capacity – strengths and weaknesses of enterprises. Practical value. The proposed system of factors may be useful for the planning of actions towards strengthening the capacity of energy management systems in the context of the formation competitive advantages on the industrial

  12. Investigating the Role of International Law in Controlling Communicable Diseases

    Directory of Open Access Journals (Sweden)

    Aliasghar Kheirkhah

    2017-02-01

    Full Text Available International law globally plays a key role in the surveillance and control of communicable diseases. Throughout the nineteenth century, international law played a dominant role in harmonizing the inconsistent national quarantine regulations of European nation states; facilitating the exchange of epidemiological information on infectious diseases; establishing international health organizations; and standardization of surveillance. Today, due to changed forms of infectious diseases and individuals' lifestyles as well as individuals' proximity caused by increased air travels, communicable diseases are in an international and cross-border form. In this regard, binding regulations and inconsistent rules adopted in international multilateral institutions like the World Health Organization, World Trade Organization, Food and Agriculture Organization can be of great use in surveillance and control of communicable diseases. With the globalization of public health, international law can be used as an essential tool in monitoring global health and reducing human vulnerability and mortality.

  13. Internal control reporting and accounting quality : Insight "comply-or-explain" internal control regime

    OpenAIRE

    Cao Thi Thanh, Huyen; Cheung, Tina

    2010-01-01

    Nowadays, there exist two reporting regimes, rules-based and principle-based (comply-or-explain). In the rules-based environment, researchers have studied the relationship between internal control quality and accounting quality. Prior studies have suggested that reports on internal control are an effective way for investors to evaluate the quality of the firm‟s internal control. By having a sound system of internal control, it creates reliance upon the firm‟s financial reporting. Therefore, t...

  14. CSNI International standard problems (ISP). Brief descriptions (1975-1999)

    International Nuclear Information System (INIS)

    2000-03-01

    Over the last twenty-five years the NEA Committee on the Safety of Nuclear Installations (CSNI) has sponsored a considerable number of international activities to promote the exchange of experience between its Member countries in the use of nuclear safety codes and testing materials. A primary goal of these activities is to increase confidence in the validity and accuracy of analytical tools or testing procedures which are needed in warranting the safety of nuclear installations, and to demonstrate the competence of involved institutions. International Standard Problems (ISPs) exercises are comparative exercises in which predictions or recalculations of a given physical problem with different best-estimate computer code are compared with each other and above all with the results of a carefully specified experimental study. ISP exercises are performed as 'open' or 'blind' problems. In an open Standard Problem exercise the results of the experiment are available to the participants before performing the calculations, while in a blind Standard Problem exercise the experimental results are locked until the calculation results are made available for comparison. The CSNI-promoted ISP activity started in the early 70's and is still underway. Parallel to other national and international programs the CSNI has sponsored over more than 25 years forty-seven International Standard Problem exercises. This program has been focused mainly on the applicability of large thermal-hydraulic code systems simulating the behaviour of nuclear coolant and containment systems, fuel behaviour under accident conditions, hydrogen distribution, core-concrete interactions and fission product release and transport. One ISP exercise was organised in connection with a seismic ultimate dynamic response test. ISP exercises have proven to be very valuable to participating countries. They have been fruitful to identify code application problems and to amplify the contacts between the experimental and

  15. International security and arms control

    International Nuclear Information System (INIS)

    Ekeus, R.

    2000-01-01

    The end of the cold war also ended the focus on the bilateral approach to arms control and disarmament. Key concepts of security needed to be revisited, along with their implications for the disarmament and arms control agenda. Though there is currently a unipolar global security environment, there remain important tasks on the multilateral arms control agenda. The major task is that of reducing and eliminating weapons of mass destruction, especially nuclear weapons. The author contends that maintaining reliance on the nuclear-weapons option makes little sense in a time when the major Powers are strengthening their partnerships in economics, trade, peacemaking and building. (author)

  16. Histotype-tailored neoadjuvant chemotherapy versus standard chemotherapy in patients with high-risk soft-tissue sarcomas (ISG-STS 1001): an international, open-label, randomised, controlled, phase 3, multicentre trial.

    Science.gov (United States)

    Gronchi, Alessandro; Ferrari, Stefano; Quagliuolo, Vittorio; Broto, Javier Martin; Pousa, Antonio Lopez; Grignani, Giovanni; Basso, Umberto; Blay, Jean-Yves; Tendero, Oscar; Beveridge, Robert Diaz; Ferraresi, Virginia; Lugowska, Iwona; Merlo, Domenico Franco; Fontana, Valeria; Marchesi, Emanuela; Donati, Davide Maria; Palassini, Elena; Palmerini, Emanuela; De Sanctis, Rita; Morosi, Carlo; Stacchiotti, Silvia; Bagué, Silvia; Coindre, Jean Michelle; Dei Tos, Angelo Paolo; Picci, Piero; Bruzzi, Paolo; Casali, Paolo Giovanni

    2017-06-01

    Previous trials from our group suggested an overall survival benefit with five cycles of adjuvant full-dose epirubicin plus ifosfamide in localised high-risk soft-tissue sarcoma of the extremities or trunk wall, and no difference in overall survival benefit between three cycles versus five cycles of the same neoadjuvant regimen. We aimed to show the superiority of the neoadjuvant administration of histotype-tailored regimen to standard chemotherapy. For this international, open-label, randomised, controlled, phase 3, multicentre trial, patients were enrolled from 32 hospitals in Italy, Spain, France, and Poland. Eligible patients were aged 18 years or older with localised, high-risk (high malignancy grade, 5 cm or longer in diameter, and deeply located according to the investing fascia), soft-tissue sarcoma of the extremities or trunk wall and belonging to one of five histological subtypes: high-grade myxoid liposarcoma, leiomyosarcoma, synovial sarcoma, malignant peripheral nerve sheath tumour, and undifferentiated pleomorphic sarcoma. Patients were randomly assigned (1:1) to receive three cycles of full-dose standard chemotherapy (epirubicin 60 mg/m 2 per day [short infusion, days 1 and 2] plus ifosfamide 3 g/m 2 per day [days 1, 2, and 3], repeated every 21 days) or histotype-tailored chemotherapy: for high-grade myxoid liposarcoma, trabectedin 1·3 mg/m 2 via 24-h continuous infusion, repeated every 21 days; for leiomyosarcoma, gemcitabine 1800 mg/m 2 on day 1 intravenously over 180 min plus dacarbazine 500 mg/m 2 on day 1 intravenously over 20 min, repeated every 14 days; for synovial sarcoma, high-dose ifosfamide 14 g/m 2 , given over 14 days via an external infusion pump, every 28 days; for malignant peripheral nerve sheath tumour, intravenous etoposide 150 mg/m 2 per day (days 1, 2, and 3) plus intravenous ifosfamide 3 g/m 2 per day (days 1, 2, and 3), repeated every 21 days; and for undifferentiated pleomorphic sarcoma, gemcitabine 900 mg/m 2 on days 1 and

  17. 5th international conference on certification and standardization in NDT

    International Nuclear Information System (INIS)

    2007-01-01

    This CD-ROM contains 30 lectures (in form of manuscripts or abstracts) and 6 posters with the following topics: 1. Some Critical Remarks from German Chemical Industry on Certification and Accreditation in NDT. 2. Global Impact of International Standard ISO 9712. 3. Maintaining Concurrent Compliance with Multiple NDT Personnel Certification Standards. 4. The Revision of the New Approach. 5. Comparison between prEN 473 Currently Submitted to Formal Vote and ISO 9712:2005. 6. Accreditation and Certification - a Contradiction?. 7. The Way We Were. 8. EFNDT-Question-Data-Bank (QDB). 9. NDT Certification in Turkey as an European Country- How It Couldn't Work as the Only Example?. 10. Validation of Practical Examination Specimens. 11. Examination Bank Structure for Radiographic Testing (RT) - An Example. 12. About the New Classification of NDT Methods Based on Positions of Risks and Equipment Life Assessment. 13. Olympus NDT Training Academy. 14. Harmonisation of Personnel Certification Schemes for Non-destructive Testing in the Asia-Pacific Region. 15. How EFNDT Can Help in Accreditation or Recognition/Approval of NDT Certification Bodies? 16. SNT-TC-1A - 40 Years of Employer Certification for NDT Personnel. 17. The Same NDT Certification Scheme for Everybody: a Dream or a Need. 18. 19. Personnel Certification for Thermographers - Status and Trends. 20. Guided Wave Training and Certification. 21. Examination Radiographs and Master Reports for the Industrial Sectors 6 and 7. 22. New Standards ISO 24497 on the Metal Magnetic Memory Method. The Program of Personnel Training and Certification. 23. The Use of the Psychometrics in NDT Certification Programs. 24. EFNDT Guidelines ''Overall NDT Quality System''. 25. The Role of the Forum for National Aerospace NDT Boards. 26. Don't Forget, We Are Supposed to Be Representing Industry. 27. Don't Forget, We Are Supposed to Be Representing Industry. 28. The Need for Standardization in NDT Personnel Certification. 29. NDT

  18. Primary standardization of cesium-137 for international intercomparison

    International Nuclear Information System (INIS)

    Srivastava, P.K.

    1977-01-01

    Primary standards of cesium-137 are of great importance for precise radiation measurements because, due to its simple decay-scheme and long half-life, it is widely used for the calibration of radiation detectors. Also 137 Cs is used for the measurement of fission-yield and uranium burn-up in reactor engineering studies. In view of these, an international intercomparison was organised on a limited scale to correlate the standards established at the Bhabha Atomic Research Centre (BARC), Bombay(India) and Physikalisch-Technische Bundesanstalt (PTB), West Germany. The ''efficiency tracing technique'' was developed at BARC for the primary standardization of 137 Cs for this intercomparison. Two tracers, namely 82 Br and 60 Co, were employed to trace the beta efficiency of the 4 πβ-γ coincidence counting system. It is shown that this technique offers high accuracy and inherent reliability. The ''tracing-technique'' for 137 Cs standardization is briefly described. The gravimetric method of dilution and preparation of mixed sources of 137 Cs - 82 Br and 137 Cs - 60 Co are given. The various counting parameters and settings are included. Data reduction and the estimation of systematic and statistical errors are discussed. The results of the intercomparison, which are also included, show that the agreement between the measurments of BARC and PTB is within 0.5%. (author)

  19. Influence Implementation Internal Control To Quality Audit Internal Education Consultant In Indonesian

    Directory of Open Access Journals (Sweden)

    Nur Zeina Maya Sari

    2015-08-01

    Full Text Available Abstract This research focus to quality audit internal with accountancy Inspection. Hameed 1995 found that the most important factors that affect auditing quality are auditors experience honesty and the knowledge in accounting and auditing standards. Research into this express an inspection of Intern Accountancy amp attributed to Monetary inspection an consultant education with quality. Audit quality is obtained by a process of identifying and administering the activities needed to achieve the quality objectives . Since an entityamp8223s internal control is under the purview of its audit committee Krishnan 2005 the relation between audit committee quality and internal control weaknesses is a subject to be investigated. The methodology used is a quantitative analysis by examining the relationship between variables conceptually. While some study its accounting activity. In self-supporting internal control. Internal control is defined as a process affected by an entitys board of directors management and other personnel designed to provide reasonable assurance regarding the achievement of objectives International Organization of Supreme Audit Institutions 1998 its bearing by reporting level an environment and reduction conduct in reporting result of mistake. What finally involvement by Audit Intern can be of benefit. In addition to researching into proposing Audit Intern can improve the target of consultant education going concern.

  20. 12 CFR 609.940 - Internal systems and controls.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Internal systems and controls. 609.940 Section 609.940 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ELECTRONIC COMMERCE Standards... business plan objectives and policies and procedures requirements regarding E-commerce; and (b) Prevent and...

  1. Budgeting-Based Organization of Internal Control

    Science.gov (United States)

    Rogulenko, Tatiana; Ponomareva, Svetlana; Bodiaco, Anna; Mironenko, Valentina; Zelenov, Vladimir

    2016-01-01

    The article suggests methodical approaches to the budgeting-based organization of internal control, determines the tasks and subtasks of control that consist in the construction of an efficient system for the making, implementation, control, and analysis of managerial decisions. The organization of responsibility centers by means of implementing…

  2. THEORETICAL ASPECTS OF INTERNAL FINANCIAL CONTROL

    Directory of Open Access Journals (Sweden)

    Dzhamilya F. Ismailova

    2013-01-01

    Full Text Available The article considers the theoretical aspects of internal financial control, summarizes the definition formulated by scientists and experts, analyzed for differences between incompany and intrafarm control. The article discusses the collapse of Enron, notes the general provisions of various types of financial control.

  3. Corruption, fraud and internal control

    Directory of Open Access Journals (Sweden)

    Luminiţa IONESCU

    2010-12-01

    Full Text Available The economic crunch created a specific context for activity and profitability failing. The corruption is more and more common in our days. In the same time, the amount of money lost by businesses and the public sector to larger frauds increased last year to unthinkable limits. The shareholders expect the directors to take care to protect their company’s assets. This is why the financial controller has a very important role in each organization. The techniques to detect corruption or a fraud are developing every year. Thus, the introduction of computerized accounting has created the opportunities to conduct very comprehensive tests at relatively little cost. However, the fraudsters became more and more clever, and the controllers are responsible for the prevention and detection of fraud. The procedures that controllers should adopt with regard to fraud depend on the risk that fraud could occur and remain undetected and also the risk of that fraud impairing the truth and fairness of the statement.

  4. 49 CFR 192.476 - Internal corrosion control: Design and construction of transmission line.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Internal corrosion control: Design and... STANDARDS Requirements for Corrosion Control § 192.476 Internal corrosion control: Design and construction... the risk of internal corrosion. At a minimum, unless it is impracticable or unnecessary to do so, each...

  5. Internal transport control in pot plant production

    NARCIS (Netherlands)

    Annevelink, E.

    1999-01-01

    Drawing up internal transport schedules in pot plant production is a very complex task. Scheduling internal transport at the operational level and providing control on a day-to-day or even hour-to-hour basis in particular requires a new approach. A hierarchical planning approach based on

  6. Nuclear materials control and accountability internal audit program

    International Nuclear Information System (INIS)

    Barham, M.A.; Abbott, R.R.

    1991-01-01

    This paper reports that the Department of Energy Order (DOE) 5633.3, Control and Accountability for Nuclear Materials, includes several requirements for development and implementation of an internal audit program. Martin Marietta Energy System, Inc., manages five sites in Tennessee, Kentucky, and Ohio for the DOE Field Office, Oak Ridge and has a Central Nuclear Materials Control and Accountability (NMC and A) Manager with matrixed responsibility for the NMC and A program at the five sites. The Energy Systems Central NMC and A Manager has developed an NMC and A Internal Audit Handbook which defines the functional responsibilities, performance criteria, and reporting and documentation requirements for the Energy Systems NMC and A Internal Audit Program. The initial work to develop and implement these standards was tested at the K-25 Site when the site hired an internal auditor to meet the DOE requirements for an NMC and A Internal Audit program

  7. Corruption, fraud and internal control

    OpenAIRE

    Luminiţa IONESCU

    2010-01-01

    The economic crunch created a specific context for activity and profitability failing. The corruption is more and more common in our days. In the same time, the amount of money lost by businesses and the public sector to larger frauds increased last year to unthinkable limits. The shareholders expect the directors to take care to protect their company’s assets. This is why the financial controller has a very important role in each organization. The techniques to detect corruption or a fraud a...

  8. Occupational exposures worldwide and revision of international standards for protection

    International Nuclear Information System (INIS)

    Czarwinski, R.; Crick, M. J.

    2011-01-01

    United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) has become the world authority on the levels and effects of ionising radiation. Since 1975, UNSCEAR has evaluated inter alia the level of occupational exposure worldwide. Based on revised questionnaires, more detailed information is now available. The results of the last evaluation (1995-2002) will be shown in the paper. Lessons learned from the responses by UN Member States will be given, as well as an outline of plans for data collection in future cycles. The requirements for protection against exposure to ionising radiation of workers, the public and patients are established in the International Basic Safety Standards for Protection against Ionising Radiation and for the Safety of Radiation Sources (BSS), published in 1996. As a result of a review of the BSS in 2006, the International Atomic Energy Agency (IAEA) started a process for the revision of these standards in 2007. International organisations including the joint sponsoring organisations of the BSS-IAEA, FAO, ILO, OECD/NEA, PAHO and WHO-as well as potential new joint sponsoring organisations of the revised BSS-the European Commission and UNEP-were involved from the beginning in the revision process. The paper also provides a summary of the status of the Draft Revised BSS and describes the new format. The paper focuses, in particular, on requirements for the protection of workers as well as record keeping requirements, which provide the legal basis for the collection of specific data; these data are of the type that can be used by UNSCEAR. (authors)

  9. Internal corrosion control of northern pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Papavinasam, S.

    2005-02-01

    The general causes of internal corrosion in pipelines were discussed along with the methods to control them. Efficient methods are needed to determine chemical efficiency for mitigating internal corrosion in transmission pipelines, particularly those used in environmentally sensitive regions in the Arctic where harsh environmental conditions prevail. According to the Office of Pipeline Safety, 15 per cent of pipeline failures in the United States from 1994 to 2000 were caused by internal corrosion. Since pipelines in the United States are slightly older than Canadian pipelines, internal corrosion is a significant issue from a Canadian perspective. There are 306,618 km of energy-related pipelines in western Canada. Between April 2001 and March 2002 there were 808 failures, of which 425 failures resulted from internal corrosion. The approach to control internal corrosion comprises of dehydrating the gases at production facilities; controlling the quality of corrosive gases such as carbon dioxide and hydrogen sulphide; and, using internal coatings. The approaches to control internal corrosion are appropriate, when supplemented by adequate integrity management program to ensure that corrosive liquids do not collect, over the operational lifetime of the pipelines, at localized areas. It was suggested that modeling of pipeline operations may need improvement. This paper described the causes, prediction and control of internal pitting corrosion. It was concluded that carbon steel equipment can continue to be used reliably and safely as pipeline materials for northern pipelines if the causes that lead to internal corrosion are scientifically and accurately predicted, and if corrosion inhibitors are properly evaluated and applied. 5 figs.

  10. Internal Border Controls in the European Union

    DEFF Research Database (Denmark)

    Jørgensen, Carsten Willemoes; Sørensen, Karsten Engsig

    2012-01-01

    Recent events, involving inter alia France and Denmark, have stimulated renewed interest in the introduction of different forms of border controls at the internal borders within the European Union. These border control measures are aimed at checking either persons or goods or both. Against...... the background of these events, this article analyses the existing rules regulating controls of persons and goods, and explores how these rules may or may not stand in the way of introducing border controls at the European Union’s internal borders. These events have resulted in a call for reforms of the current...

  11. Concrete blocks. Analysis of UNE, ISO en standards and comparison with other international standards

    Directory of Open Access Journals (Sweden)

    Álvarez Alonso, Marina

    1990-12-01

    Full Text Available This paper attempts to describe the recently approved UNE standards through a systematic analysis of the main specifications therein contained and the values considered for each of them, as well as the drafts for ISO and EN concrete block standards. Furthermore, the study tries to place the set of ISO standards in the international environment through a comparative analysis against a representative sample of the standards prevailing in various geographical regions of the globe to determine the analogies and differences among them. PALABRAS CLAVE: albañilería, análisis de sistemas, bloque de hormigón, muros de fábrica, normativa KEY WORDS: masonry, system analysis, concrete blocks, masonry walls, standards

    En este trabajo se pretende describir la reciente aprobada normativa UNE, analizando sistemáticamente las principales prescripciones contempladas y los valores considerados para cada una de ellas, así como los proyectos de Norma ISO, y EN sobre bloques de hormigón. Asimismo se intenta situar la normativa UNE en al ámbito internacional, haciendo un análisis comparativo con una representación de Normas de distintas regiones geográficas del mundo, determinando sus analogías y diferencias.

  12. Present status of standards relating to radiation control and protection

    International Nuclear Information System (INIS)

    Minami, Kentaro

    1996-01-01

    Japanese and international standards related to radiation control and radiation protective management are presented focusing on the forming condition, significance, current situation, and their relationship. Japanese Industrial Standards (JIS) is quite useful in the field of atomic energy as well as other fields in terms of optimization and rationalization of the management. JIS includes JIS Z 4001 Atomic Energy Terminology which corresponds to internationl standards ISO 921 Nuclear Glossary, and JIS Z 4005 Medical Radiation Terminology, covering about 500 articles, which corresponds to IEC 788 Medical Radiology-Terminology. The first standards regarding radiation protection was established in X-ray Film Badge, which is included in the field of personal dosimeter, in 1956. Currently, 36 JIS has been established in the field of radiation management dosimeter and 3 are under arrangement. As for radiation protective supplies, 9 JIS has been established so far. Before proposal of JIS, investigation had been conducted to improve, simplify, and standardize the standards of radiation dosimetric technique, dosimeters, dosimetric procedures, and improvement. In this article, the results of material surface contamination monitoring and body surface monitoring conducted in Atomic Energy Safety Association and Radiation Dosimetry Associationare reported, and ISO and IEC are also treated. (S.Y.)

  13. AGRARIAN ACCOUNTANCY IN THE VISUAL CONE OF INTERNATIONAL ACCOUNTING STANDARDS

    Directory of Open Access Journals (Sweden)

    Daniela SIMTION

    2014-04-01

    Full Text Available After a long period during which agriculture did not have a standard of its own and applied for that matter the IAS 2 rules regarding inventories; IAS 16 regarding property, plant and equipment and IAS 18 regarding revenues, one last standard is being born – IAS 41. The late appearance of this standard is compensated by the great attention granted from the IASC, as agriculture is very important for those countries in course of development. IAS 41 is operative for those financial statements starting with the 1 of January 2003. The current standard is applied to account those elements regarding agricultural activities. IAS 41 is does not deal: with genuine exploiting activities, with harvested agricultural products, which are non biological products, or with the agricultural production, which is incorporated in the processing process. The activity will follow the financial reporting guidelines imposed by IAS 41 if: (athe plants or animals, that represent the object of the activities, are living and suitable for transformation; (b the change must be controlled, a fact which implies a range of activities like ground fertilizing and crop cultivation, feeding and medical assistance while breeding animals;(cthere have to exist fundamentals for evaluating changes like: the degree at which plants ripen, the animals weight, the trees circumference. The most important feature of this standard is the request for evaluating the biological assets at each balance sheet date at its fair value. Taking into consideration the limited framework of the current standard, beside of the explicit exceptions, all IAS must also be applied in agriculture.

  14. Prospects of implementation of "Basel III" international standards for domestic banks based on international experience

    Directory of Open Access Journals (Sweden)

    Baha Oksana

    2016-04-01

    Full Text Available This article summarizes the main requirements of the "Basel III" new standards in the context of banks capital regulation and identifies prospects for implementation of domestic banks based on analysis of international experience. The urgency of the problem is formulated in the need to restore the stability of the banking system of Ukraine with the new standards, which purpose is to increase the stability of banks and to protect the rights of financial services consumers. The main threats faced by the banking systems of developed countries and possible for the Ukrainian financial system were determined. The ways of achieving maximum benefits of new banking reform introduction were proposed.

  15. Contribution from twenty two years of CSNI International Standard Problems

    International Nuclear Information System (INIS)

    1998-03-01

    This report provides a brief overview on the contribution of some CSNI International Standard Problems (ISPs) to nuclear reactor safety issues (41 ISPs performed over the last 22 years). This CSNI activity on ISPs has been one of the major activities of the Principal Working Group no.2 on Coolant System Behaviour. Its domain extended from thermal-hydraulics to several other accident domains following the main concerns of nuclear reactor safety, e.g., LOCA predictions fuel behaviour, operator procedures, containment thermal-hydraulics severe accidents, VVERs, etc. ISPs are providing unique material and benefits for some safety related issues. Clearly, all the technical findings and benefits provided by ISPs are still needed and contribute to advancement of nuclear safety. The report provides some overview on the general objectives of ISPs, content and types of ISPs, and technical domains covered by ISPs, followed by a synthesis of technical findings and benefits to the scientific community

  16. The Environmental Action Internal Control Index.

    Science.gov (United States)

    Smith-Sebasto, N. J.; Fortner, Rosanne W.

    1994-01-01

    Reports research designed to develop a reliable and valid instrument to assess the relationship between locus of control of reinforcement and environmentally responsible behavior in (n=853) undergraduate students. Results suggest that the Environmental Action Internal Control Index can accurately predict environmentally responsible behavior.…

  17. CAMAC-an international standard for data machine instrumentation

    CERN Document Server

    Johnsen, P J

    1973-01-01

    CAMAC is a standard for on-line computer instrumentation and control. Owing to the world-wide acceptance of CAMAC, standardized and mutually compatible equipment is now offered by a great number of manufacturers. CAMAC systems are modular, and with the range of modules commercially available, it is possible to build up flexible and complex data processing systems. Use of CAMAC requires a CAMAC- compatible entrance (interface) to the computer. Once established, users are later on completely independent of the type of computer used. General aspects, CAMAC systems for NORD-1 and NORD-10 are presented. The former is developed at Physics Institute, Oslo, and the latter is developed as a result of the CERN-contract gained by NORSK DATAELEKTRONIKK.

  18. Enabling conformity to international standards within SeaDataNet

    Science.gov (United States)

    Schaap, Dick M. A.; Boldrini, Enrico; de Korte, Arjen; Santoro, Mattia; Manzella, Giuseppe; Nativi, Stefano

    2010-05-01

    SeaDataNet objective is to construct a standardized system for managing the large and diverse data sets collected by the oceanographic fleets and the new automatic observation systems. The aim is to network and enhance the currently existing infrastructures, which are the national oceanographic data centres and satellite data centres of 36 countries, active in data collection. The networking of these professional data centres, in a unique virtual data management system will provide integrated data sets of standardized quality on-line. The Common Data Index (CDI) is the middleware service adopted by SeaDataNet for discovery and access of the available data. In order to develop an interoperable and effective system, the use of international de facto and de jure standards is required. In particular the new goal object of this presentation is to introduce and discuss the solutions for making SeaDataNet compliant with the European Union (EU) INSPIRE directive and in particular with its Implementing Rules (IR). The European INSPIRE directive aims to rule the creation of an European Spatial Data Infrastructure (ESDI). This will enable the sharing of environmental spatial information among public sector organisations and better facilitate public access to spatial information across Europe. To ensure that the spatial data infrastructures of the European Member States are compatible and usable in a community and transboundary context, the directive requires that common IRs are adopted in a number of specific areas (Metadata, Data Specifications, Network Services, Data and Service Sharing and Monitoring and Reporting). Often the use of already approved digital geographic information standards is mandated, drawing from international organizations like the Open Geospatial Consortium (OGC) and the International Organization for Standardization (ISO), the latter by means of its Technical Committee 211 (ISO/TC 211). In the context of geographic data discovery a set of mandatory

  19. International standard for the charging of electric vehicles; Internationaler Standard fuer das Laden von Elektrofahrzeugen - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Mathoy, A.

    2001-12-15

    This final report for the Swiss Federal Office of Energy (SFOE) reports on the situation regarding the standardisation of battery charging systems for electric vehicles. The advantages of an international standard both for users and manufacturers of electrically-powered vehicles are discussed. The work done in the IEC and CENELEC technical committees is reviewed. Developments achieved since 1999 are reviewed and further developments and work to be done are examined. The most important points in the IEC standard 61851 are looked at and various connector interfaces are described. Direct and inductive charging systems according to IEC 61980 are examined and the special situation in Italy, where power available in homes for the charging of electrical vehicles is more limited, is reviewed.

  20. The European Union CREATE project: a model for international standardization of allergy diagnostics and vaccines

    NARCIS (Netherlands)

    Chapman, Martin D.; Ferreira, Fatima; Villalba, Mayte; Cromwell, Oliver; Bryan, Donna; Becker, Wolf-Meinhard; Fernández-Rivas, Montserrat; Durham, Stephen; Vieths, Stefan; van Ree, Ronald; Aalbers, M.; Notten, S.; Ooievaar-de Heer, P.; Ferreira, F.; Gademaier, G.; Wallner, M.; Villalba, M.; Rodriguez, R.; Becker, W.-M.; Eberhardt, F.; Lepp, U.; Raulf-Heimsoth, M.; Valenta, R.; Focke, M.; Bryan, D.; Dolman, C.; Das, R. G.; Vieths, S.; Fötisch, K.; Di Felice, G.; Pini, C.; Cromwell, O.; Fiebig, H.; Weber, B.; van Schijndel, H.; Dorpema, J. W.; Marco, F. M.; Monsalve, R.; Barber, D.; Caldas, E. Fernandez; Moingeon, P.; Didierlaurent, A.; André, C.; Kroon, A.; Neubauer, A.; Chapman, M.; Vailes, L.; Tsay, A.; Durham, S.; Custovic, A.; Simpson, B.; Knulst, A.; Rivas, M. Fernández; Mancebo, E. Gonzalez; Bahima, A. Cistero; Moncin, M. M. San Miguel; Mari, A.; Kinaciyan, T.; Quiralte, J.; Pauli, G.; de Blay, F.; Purohit, A.; Rak, S.

    2008-01-01

    Allergen measurements are used extensively in the formulation of allergy diagnostics and vaccines, yet no purified international allergen standards are available for calibration purposes. The aims of the European Union CREATE project were to develop international standards with verifiable allergen

  1. International Review of Standards and Labeling Programs for Distribution Transformers

    Energy Technology Data Exchange (ETDEWEB)

    Letschert, Virginie [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Scholand, Michael [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Carreño, Ana María [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hernandez, Carolina [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-06-20

    Transmission and distribution (T&D) losses in electricity networks represent 8.5% of final energy consumption in the world. In Latin America, T&D losses range between 6% and 20% of final energy consumption, and represent 7% in Chile. Because approximately one-third of T&D losses take place in distribution transformers alone, there is significant potential to save energy and reduce costs and carbon emissions through policy intervention to increase distribution transformer efficiency. A large number of economies around the world have recognized the significant impact of addressing distribution losses and have implemented policies to support market transformation towards more efficient distribution transformers. As a result, there is considerable international experience to be shared and leveraged to inform countries interested in reducing distribution losses through policy intervention. The report builds upon past international studies of standards and labeling (S&L) programs for distribution transformers to present the current energy efficiency programs for distribution transformers around the world.

  2. International Financial Reporting Standards and Earnings Management in Latin America

    Directory of Open Access Journals (Sweden)

    Alex Augusto Timm Rathke

    2016-05-01

    Full Text Available This study analyzes the level of earnings management in Latin America after the adoption of the International Financial Reporting Standards (IFRS and analyzes the role of cross-listing in the United States. The literature on earnings management in less developed countries is still under construction, and few studies focus on this issue, especially with respect to Latin America, despite its relevant role in the global economy. This paper fills this gap in the literature as it analyzes the level of IFRS earnings management regarding the first and main Latin American countries applying IFRS (Brazil and Chile, when compared to the main Anglo-Saxon countries with IFRS tradition (United Kingdom and Australia, and with the main Continental European economies (France and Germany. The results show that Latin American firms present a higher level of earnings management than Continental European and Anglo-Saxon firms, and this opportunistic behavior remains significant when only global players with cross-listing in the United States are analyzed. Thus, even with a unique set of high quality accounting standards (IFRS and strong reporting incentives, countries’ specific characteristics still play an important role in the way IFRS is implemented in each country.

  3. ASTEC participation in the international standard problem on KAEVER

    International Nuclear Information System (INIS)

    Spitz, P.; Van Dorsselaere, J.P.; Schwinges, B.; Schwarz, S.

    2001-01-01

    The objectives of the International Standard Problem no 44 was aerosol depletion behaviour under severe accident conditions in a LWR containment examined in the KAEVER test facility of Battelle (Germany). Nine organisations participated with 5 different codes in the ISP44, including a joint participation of GRS and IPSN with the integral code ASTEC (and in particular the CPA module) they have commonly developed. Five tests were selected from the KAEVER test matrix: K123, K148, K186 and K188 as open standard problems and the three-component test K187 as blind standard problem. All these tests were performed in supersaturated conditions and with slight fog formation, which are the most ambitious conditions for the coupled problem of thermal hydraulics and aerosol processes. The comparison between calculation and test showed a good agreement for all the tests with respect to the thermal-hydraulic conditions in the vessel, i.e. total pressure, atmosphere temperature, sump water and nitrogen mass, etc.... As for aerosol depletion, the ASTEC results were in a good overall agreement with the measured data. The code in particular predicted well the fast depletion of the hygroscopic and mixed aerosols and the slow depletion of insoluble silver aerosol. The important effects of bulk condensation, solubility and the Kelvin effect on the aerosol depletion were well predicted. However the code overestimation of steam condensation on hygroscopic aerosols in supersaturated conditions indicates that some slight improvements of the appropriate ASTEC models are needed in the future. In the final ISP44 workshop, the deviations of the ASTEC results with respect to the experiments were considered to be small compared to those of most other codes. (authors)

  4. Internal Control Systems in the Library Environment.

    Science.gov (United States)

    Begg, Robert T.

    1985-01-01

    Examines system for safeguarding assets and guaranteeing reliability of library's financial records within context of management functions that comprise accounting controls: planning by budget or other standard of comparison; operation of effective accounting and record-keeping system; personnel management practices. Cash controls as example of…

  5. Developing international safety standards for the geological disposal of radioactive waste

    International Nuclear Information System (INIS)

    Metcalf, P.

    2001-01-01

    In the context of the International Atomic Energy Agency's (IAEA) programme to create a corpus of internationally accepted Radioactive Waste Safety Standards (RADWASS), focus is currently being placed on establishing standards for the 'geological disposal of radioactive waste'. This is a challenging task and to help the standards development process there is a need to stimulate discussion of some of the associated scientific and technical issues. A number of position papers developed in recent years by a subgroup of the Waste Safety Standards Committee (WASSC), the subgroup on Principles and Criteria for Radioactive Waste Disposal, address many of the relevant issues. These include a common safety based framework for radioactive waste disposal, appropriate time frames for safety assessment, different possible indicators of long-term safety, the safety implications of reversibility and retrievability, the assessment of possible human intrusion into the repository, the role and limitations of institutional control, establishing reference critical groups and biospheres for long-term assessment, and what is meant by 'compliance' with the standards. These papers will be discussed at a Specialists Meeting to be held at the IAEA in June 2001 as a means of establishing the extent to which they enjoy the general support of experts. In order to broaden that consensus, the conclusions reached at the Specialists Meeting on the issues listed above will be presented and discussed with participants at a number of international meetings. Later this year, a draft safety standard on the geological disposal of radioactive waste which takes account of the consensus positions reached through the various consultations will be submitted for the consideration of Waste Safety Standards Committee (WASSC), the officially approved body within the IAEA for the review and approval of waste safety standards. The Committee is made up of government appointed radioactive waste regulators

  6. PERFORMANCE IN INTERNAL CONTROL AND RISK MANAGEMENT

    OpenAIRE

    JELER (POPA) IOANA; FOCŞAN ELEONORA IONELA; CORICI MARIAN CĂTĂLIN

    2017-01-01

    The purpose of this article is to highlight the importance of internal control and risk management. In practice, economic entities meet a variety of risks that have the origins from the internal environment or the external one. Although there are different of views on addressing the concept of risk - threats or opportunities, event or action, accordingly uncertain, proposed by specialists in risk management in this article we try to present these issues and identify techniques to ...

  7. Updating the International Standards for Tuberculosis Care. Entering the era of molecular diagnostics.

    Science.gov (United States)

    Hopewell, Philip C; Fair, Elizabeth L; Uplekar, Mukund

    2014-03-01

    The International Standards for Tuberculosis Care, first published in 2006 (Lancet Infect Dis 2006;6:710-725.) with a second edition in 2009 ( www.currytbcenter.ucsf.edu/international/istc_report ), was produced by an international coalition of organizations funded by the United States Agency for International Development. Development of the document was led jointly by the World Health Organization and the American Thoracic Society, with the aim of promoting engagement of all care providers, especially those in the private sector in low- and middle-income countries, in delivering high-quality services for tuberculosis. In keeping with World Health Organization recommendations regarding rapid molecular testing, as well as other pertinent new recommendations, the third edition of the Standards has been developed. After decades of dormancy, the technology available for tuberculosis care and control is now rapidly evolving. In particular, rapid molecular testing, using devices with excellent performance characteristics for detecting Mycobacterium tuberculosis and rifampin resistance, and that are practical and affordable for use in decentralized facilities in low-resource settings, is being widely deployed globally. Used appropriately, both within tuberculosis control programs and in private laboratories, these devices have the potential to revolutionize tuberculosis care and control, providing a confirmed diagnosis and a determination of rifampin resistance within a few hours, enabling appropriate treatment to be initiated promptly. Major changes have been made in the standards for diagnosis. Additional important changes include: emphasis on the recognition of groups at increased risk of tuberculosis; updating the standard on antiretroviral treatment in persons with tuberculosis and human immunodeficiency virus infection; and revising the standard on treating multiple drug-resistant tuberculosis.

  8. 25 CFR 900.54 - Should the property management system prescribe internal controls?

    Science.gov (United States)

    2010-04-01

    ... System Standards § 900.54 Should the property management system prescribe internal controls? Yes. Effective internal controls should include procedures: (a) For the conduct of periodic inventories; (b) To... 25 Indians 2 2010-04-01 2010-04-01 false Should the property management system prescribe internal...

  9. 75 FR 75937 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

    Science.gov (United States)

    2010-12-07

    ... National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines... internal combustion engines. Subsequently, the Administrator received two petitions for reconsideration... Any industry using a stationary 2211 Electric power reciprocating internal generation, combustion...

  10. 76 FR 12923 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

    Science.gov (United States)

    2011-03-09

    ... National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines... pollutants for existing stationary spark ignition reciprocating internal combustion engines. The final rule... reciprocating internal combustion generation, engine. transmission, or distribution. 622110 Medical and surgical...

  11. Internal Control Good Cooperative Governance And Performance

    Directory of Open Access Journals (Sweden)

    Andry Arifian Rachman

    2017-11-01

    Full Text Available This study aims to examine the influence of internal control and good cooperative governance partially and simultaneously to the performance of cooperatives in West Java Province. The research method used in this research is descriptive and verification. The sample in this research is 22 boards as manager of cooperative in West Java Province. The data used in the research is the primary data through questionnaire collection. Validity and reliability testing is performed before hypothesis testing. This research uses multiple regression analysis technique. Based on hypothesis testing obtained 1 internal control has no significant effect on performance 2 good cooperative governance has a significant effect on performance and 3 internal control and good cooperative governance have a significant effect on performance.

  12. Process Control System Cyber Security Standards - An Overview

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Evans

    2006-05-01

    The use of cyber security standards can greatly assist in the protection of process control systems by providing guidelines and requirements for the implementation of computer-controlled systems. These standards are most effective when the engineers and operators, using the standards, understand what each standard addresses. This paper provides an overview of several standards that deal with the cyber security of process measurements and control systems.

  13. THE PARTICIPATION OF INTERNATIONAL ENTITIES ON THE PUBLIC CONSULTATION PROCESS OF PUBLIC INTERNATIONAL ACCOUNTING STANDARD ABOUT INTANGIBLE ASSETS

    OpenAIRE

    Salaroli, Abner Ribeiro; de Almeida, José Elias Feres; Gama, Janyluce Rezende

    2015-01-01

    The public accounting follows the same direction of financial accounting on the search for convergence to international standards, where IFAC is the body responsible for issuing international standards of public accounting. In this context, this study aims to analyze the process of development of the international public accounting standard about public intangible assets. The analysis was performed based on the suggestions available in comment letters sent to the consultation process. As a th...

  14. Efficacy of internal control and controlling business risks

    Directory of Open Access Journals (Sweden)

    Luminiţa IONESCU

    2010-06-01

    Full Text Available Companies can gain additional efficiency in designing and implementing or assessing internal control by focusing on only those financial reporting objectives directly applicable to the company’s activities and circumstances, taking a risk based approach to internal control. It is important for any organization to have reliable financial data for internal decision-making purpose. Financial information is often useful in many internal decisions such as product or service pricing. This is why the most important function of the controller is to create and maintain the corporate financial control system. Today’s corporation operates in an increasingly complex environment and the controller’s role is to advice the management of current or future problems of the business environment or to prevent the fraud.

  15. Audit Oversight: Quality Control Review of the Defense Finance and Accounting Service Office of Internal Review

    National Research Council Canada - National Science Library

    2004-01-01

    .... The Government Auditing Standards (GAS) require that an audit organization performing Government audits have an appropriate internal quality control system and undergo an external quality control review every 3 years by an organization...

  16. International comparison of AC-DC current transfer standards

    Science.gov (United States)

    Heine, G.; Garcocz, M.; Waldmann, W.

    2017-01-01

    The measurements of the international comparison of ac-dc current transfer standards identified as EURAMET.EM-K12 started in June 2012 and were completed in December 2014. Twenty NMIs in the EURAMET region and one NMI in the AFRIMET region took part: BEV (Austria), CMI (Czech Republic), PTB (Germany), METAS (Switzerland), JV (Norway), UME (Turkey), GUM (Poland), IPQ (Portugal), CEM (Spain), INRIM (Italy), SP (Sweden), DANIAmet-MI-Trescal (Denmark), BIM (Bulgaria), MKEH (Hungary), SIQ (Slovenia), LNE (France), NSAI NML (Ireland), VSL (The Netherlands), NPL (United Kingdom), Metrosert (Estonia), NIS (Egypt). The comparison was proposed to link the National Metrology Institutes organised in EURAMET to the key comparison CCEM-K12. The ac-dc current transfer difference of each travelling standard had been measured at its nominal current 10 mA and 5 A at the following frequencies: 10 Hz, 55 Hz, 1 kHz, 10 kHz, 20 kHz, 50 kHz, 100 kHz. The test points were selected to link the results with the equivalent CCEM Key Comparison (CCEM-K12), through five NMIs participating in both EURAMET and CCEM key comparisons (PTB, JV, NPL, SP and BEV). The report shows the degree of equivalence in the EURAMET region and also the degree of equivalence with the corresponding CCEM reference value. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCEM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

  17. 75 FR 19944 - International Code Council: The Update Process for the International Codes and Standards

    Science.gov (United States)

    2010-04-16

    ... documents from ICC's Chicago District Office: International Code Council, 4051 W Flossmoor Road, Country... Energy Conservation Code. International Existing Building Code. International Fire Code. International...

  18. Nuclear reactor internals with control elements guides

    International Nuclear Information System (INIS)

    Baujat, J.; Chevereau, G.

    1991-01-01

    The internals have a lower plate, a superior plate, support columns and guide tubes for the control rods displacements. The lower section of the control rod guide tube have a base that fits into a bevelled seat in the lower plate. The guide tube is held into the seat by a spring, compressed between the base of the upper section of the tube and the lower plate

  19. International comparison of calibration standards for exposure and absorbed dose

    International Nuclear Information System (INIS)

    Horakova, I.; Wagner, R.

    1990-01-01

    A comparison was performed of the primary calibration standards for 60 Co gamma radiation dose from Czechoslovakia (UDZ CSAV, Prague), Austria (OEFZS/BEV Seibersdorf) and Hungary (OMH Budapest) using ND 1005 (absolute measurement) and V-415 (by means of N x ) graphite ionization chambers. BEV achieved agreement better than 0.1%, OMH 0.35%. Good agreement was also achieved for the values of exposure obtained in absolute values and those obtained via N x , this for the ND 1005/8105 chamber. The first ever international comparison involving Czechoslovakia was also performed of the unit of absorbed gamma radiation in a water and/or graphite phantom. The participants included Czechoslovakia (UDZ CSAV Prague), the USSR (VNIIFTRI Moscow) and Austria (OEFZS/BEV Seibersdorf). In all measurements, the agreement was better than 1%, which, in view of the differences in methodologies (VNIIFTRI, BEV: calorimetry, UDZ, UVVVR: ionometry) and the overall inaccuracies in determining the absorbed dose values, is a good result. (author)

  20. International standardization of safety requirements for fast reactors

    International Nuclear Information System (INIS)

    2011-06-01

    Japan Atomic Energy Agency (JAEA) is conducting the FaCT (Fast Reactor Cycle Technology Development) project in cooperation with Japan Atomic Power Company (JAPC) and Mitsubishi FBR systems inc. (MFBR), where an advanced loop-type fast reactor named JSFR (Japan Sodium-cooled Fast Reactor) is being developed. It is important to develop software technologies (a safety guideline, safety design criteria, safety design standards etc.) of FBRs as well as hardware ones (a reactor plant itself) in order to address prospective worldwide utilization of FBR technology. Therefore, it is expected to establish a rational safety guideline applicable to the JSFR and harmonized with national nuclear-safety regulations as well, including Japan, the United States and the European Union. This report presents domestic and international status of safety guideline development for sodium-cooled fast reactors (SFRs), results of comparative study for safety requirements provided in existing documents and a proposal for safety requirements of future SFRs with a roadmap for their refinement and worldwide utilization. (author)

  1. Climatic changes, the international control stakes

    International Nuclear Information System (INIS)

    Maljean-Dubois, S.

    2007-01-01

    The author presents a juridical and economic analysis of the control mechanism called ''observance'' of the Kyoto protocol. This political and juridical innovation in the domain of the international agreements on the environment deals with the national sovereignty and the economical development mode. (A.L.B.)

  2. International cooperative analysis of standard substance, IAEA-0390

    International Nuclear Information System (INIS)

    Kawamoto, Keizo; Takada, Jitsuya; Moriyama, Hirotake; Akaboshi, Mitsuhiko

    1999-01-01

    Three kinds of algae (IAEA-0391, IAEA-0392 and IAEA-0393) were defined as the biological standard substance to monitor environmental pollution by Analytical Quality Control Service of IAEA (IAEA-AQCS). In this study, analysis of these standard substances were made using ICP-MS to compare with the results of simultaneously conducted radioactivation analysis (INAA). The respective cultures of the three algae were cooperatively prepared by IAEA-AQCS and microbial Institute of Czechoslovakia. After drying and sterilizing by Co-60 exposure, these samples were sent to KURRI. When the results from the experiment in KURRI were compared with the values recommended through statistical treatment of the data obtained by IAEA, these values of 5 elements, Fe, Cr, Mg, Mn and Na were well coincident for either of IAEA-0391, IAEA-0392 and IAEA-0393 and the values of As, Ca, Cd, Co, Cu, K and Zn were nearly coincident between them. Regarding Hg and La, the data from INAA and ICP-MS were very different from the recommended values of IAEA for either of samples. (M.N.)

  3. International Telecommunication Control: International Law and the Ordering of Satellite and Other Forms of International Broadcasting.

    Science.gov (United States)

    Smith, Delbert D.

    The need for and the available alternatives for international telecommunication controls are examined, and a functional approach to this area of law is offered. Information from a number of areas is collected and examined as it relates to the basic problem. These areas include general principles of international law, the activities of the…

  4. Multiculturalism and international law : discussing universal standards / Alexandra Xanthaki

    Index Scriptorium Estoniae

    Xanthaki, Alexandra

    2010-01-01

    Multikultuurilisuse tõlgendamisest rahvusvahelistes lepingutes (ICESCR - International Covenant on Economic, Social and Cultural Rights; ICERD -International Convention on the Elimination of All Forms of Racial Discrimination ; CESCR - Committee on Economic, Social and Cultural Rights)

  5. International Society of Human and Animal Mycology (ISHAM)-ITS reference DNA barcoding database--the quality controlled standard tool for routine identification of human and animal pathogenic fungi.

    Science.gov (United States)

    Irinyi, Laszlo; Serena, Carolina; Garcia-Hermoso, Dea; Arabatzis, Michael; Desnos-Ollivier, Marie; Vu, Duong; Cardinali, Gianluigi; Arthur, Ian; Normand, Anne-Cécile; Giraldo, Alejandra; da Cunha, Keith Cassia; Sandoval-Denis, Marcelo; Hendrickx, Marijke; Nishikaku, Angela Satie; de Azevedo Melo, Analy Salles; Merseguel, Karina Bellinghausen; Khan, Aziza; Parente Rocha, Juliana Alves; Sampaio, Paula; da Silva Briones, Marcelo Ribeiro; e Ferreira, Renata Carmona; de Medeiros Muniz, Mauro; Castañón-Olivares, Laura Rosio; Estrada-Barcenas, Daniel; Cassagne, Carole; Mary, Charles; Duan, Shu Yao; Kong, Fanrong; Sun, Annie Ying; Zeng, Xianyu; Zhao, Zuotao; Gantois, Nausicaa; Botterel, Françoise; Robbertse, Barbara; Schoch, Conrad; Gams, Walter; Ellis, David; Halliday, Catriona; Chen, Sharon; Sorrell, Tania C; Piarroux, Renaud; Colombo, Arnaldo L; Pais, Célia; de Hoog, Sybren; Zancopé-Oliveira, Rosely Maria; Taylor, Maria Lucia; Toriello, Conchita; de Almeida Soares, Célia Maria; Delhaes, Laurence; Stubbe, Dirk; Dromer, Françoise; Ranque, Stéphane; Guarro, Josep; Cano-Lira, Jose F; Robert, Vincent; Velegraki, Aristea; Meyer, Wieland

    2015-05-01

    Human and animal fungal pathogens are a growing threat worldwide leading to emerging infections and creating new risks for established ones. There is a growing need for a rapid and accurate identification of pathogens to enable early diagnosis and targeted antifungal therapy. Morphological and biochemical identification methods are time-consuming and require trained experts. Alternatively, molecular methods, such as DNA barcoding, a powerful and easy tool for rapid monophasic identification, offer a practical approach for species identification and less demanding in terms of taxonomical expertise. However, its wide-spread use is still limited by a lack of quality-controlled reference databases and the evolving recognition and definition of new fungal species/complexes. An international consortium of medical mycology laboratories was formed aiming to establish a quality controlled ITS database under the umbrella of the ISHAM working group on "DNA barcoding of human and animal pathogenic fungi." A new database, containing 2800 ITS sequences representing 421 fungal species, providing the medical community with a freely accessible tool at http://www.isham.org/ and http://its.mycologylab.org/ to rapidly and reliably identify most agents of mycoses, was established. The generated sequences included in the new database were used to evaluate the variation and overall utility of the ITS region for the identification of pathogenic fungi at intra-and interspecies level. The average intraspecies variation ranged from 0 to 2.25%. This highlighted selected pathogenic fungal species, such as the dermatophytes and emerging yeast, for which additional molecular methods/genetic markers are required for their reliable identification from clinical and veterinary specimens. © The Author 2015. Published by Oxford University Press on behalf of The International Society for Human and Animal Mycology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  6. The Glioma International Case-Control Study

    DEFF Research Database (Denmark)

    Amirian, E. Susan; Armstrong, Georgina N; Zhou, Renke

    2016-01-01

    Decades of research have established only a few etiological factors for glioma, which is a rare and highly fatal brain cancer. Common methodological challenges among glioma studies include small sample sizes, heterogeneity of tumor subtypes, and retrospective exposure assessment. Here, we briefly...... describe the Glioma International Case-Control (GICC) Study (recruitment, 2010-2013), a study being conducted by the Genetic Epidemiology of Glioma International Consortium that integrates data from multiple data collection sites, uses a common protocol and questionnaire, and includes biospecimen...

  7. Collaborative study to assess the suitability of a candidate International Standard for yellow fever vaccine.

    Science.gov (United States)

    Ferguson, Morag; Heath, Alan

    2004-12-01

    Yellow fever vaccines are routinely assayed by plaque assay. However, the results of these assays are then converted into mouse LD(50) using correlations/conversion factors which, in many cases, were established many years ago. The minimum required potency in WHO Recommendations is 10(3) LD(50)/dose. Thirteen participants from 8 countries participated in a collaborative study whose aim was to assess the suitability of two candidate preparations to serve as an International Standard for yellow fever vaccine. In addition, the study investigated the relationship between the mouse LD(50) test and plaque forming units with a view to updating the WHO recommendations. Plaque assays were more reproducible than mouse assays, as expected. Differences in sensitivities of plaque assays were observed between laboratories but these differences appear to be consistent within a laboratory for all samples and the expression of potency relative to the candidate standard vaccine improved the reproducibility of assays between laboratories. However, the use of potencies had little effect on the between laboratory variability in mouse LD(50) assays. There appears to be a consistent relationship between overall mean LD(50) and plaques titre for all study preparations other than sample E. The slope of the correlation curve is >1 and it would appear that 10(3) LD(50) is approximately equivalent to 10(4) plaque forming units (PFU), based on the overall means of all laboratory results. The First International Standard for yellow fever vaccine, NIBSC Code 99/616, has been established as the First International Standard for yellow fever vaccine by the Expert Committee of Biological Standards of the World Health Organisation. The International Standard has been arbitrarily assigned a potency of 10(4.5) International Units (IU) per ampoule. Manufacturers and National Control Laboratories are including the First International Standard for yellow fever vaccine in routine assays so that the minimum

  8. Exposure Control--OSHA's Bloodborne Pathogens Standard.

    Science.gov (United States)

    Granville, Mark F.

    1993-01-01

    Explains schools' responsibilities in complying with the Occupational Safety and Health Administration's (OSHA) Bloodborne Pathogens Standard. Describes exposure determination plan, protective equipment, housekeeping practices, labeling of waste, training employees, hepatitis B vaccinations, postexposure evaluation and medical follow-up, and…

  9. Standard hazard analysis, critical control point and hotel management

    Directory of Open Access Journals (Sweden)

    Vujačić Vesna

    2017-01-01

    Full Text Available Tourism is a dynamic category which is continuously evolving in the world. Specificities that have to be respected in the execution in relation to the food industry are connected with the fact that the main differences which exist regarding the food serving procedure in catering, numerous complex recipes and production technologies, staff fluctuation, old equipment. For an effective and permanent implementation, the HACCP concept is very important for building a serious base. In this case, the base is represented by the people handling the food. This paper presents international ISO standards, the concept of HACCP and the importance of its application in the tourism and hospitality industry. The concept of HACCP is a food safety management system through the analysis and control of biological, chemical and physical hazards in the entire process, from raw material production, procurement, handling, to manufacturing, distribution and consumption of the finished product. The aim of this paper is to present the importance of the application of HACCP concept in tourism and hotel management as a recognizable international standard.

  10. Finite element analyses for seismic shear wall international standard problem

    International Nuclear Information System (INIS)

    Park, Y.J.; Hofmayer, C.H.

    1998-04-01

    Two identical reinforced concrete (RC) shear walls, which consist of web, flanges and massive top and bottom slabs, were tested up to ultimate failure under earthquake motions at the Nuclear Power Engineering Corporation's (NUPEC) Tadotsu Engineering Laboratory, Japan. NUPEC provided the dynamic test results to the OECD (Organization for Economic Cooperation and Development), Nuclear Energy Agency (NEA) for use as an International Standard Problem (ISP). The shear walls were intended to be part of a typical reactor building. One of the major objectives of the Seismic Shear Wall ISP (SSWISP) was to evaluate various seismic analysis methods for concrete structures used for design and seismic margin assessment. It also offered a unique opportunity to assess the state-of-the-art in nonlinear dynamic analysis of reinforced concrete shear wall structures under severe earthquake loadings. As a participant of the SSWISP workshops, Brookhaven National Laboratory (BNL) performed finite element analyses under the sponsorship of the U.S. Nuclear Regulatory Commission (USNRC). Three types of analysis were performed, i.e., monotonic static (push-over), cyclic static and dynamic analyses. Additional monotonic static analyses were performed by two consultants, F. Vecchio of the University of Toronto (UT) and F. Filippou of the University of California at Berkeley (UCB). The analysis results by BNL and the consultants were presented during the second workshop in Yokohama, Japan in 1996. A total of 55 analyses were presented during the workshop by 30 participants from 11 different countries. The major findings on the presented analysis methods, as well as engineering insights regarding the applicability and reliability of the FEM codes are described in detail in this report. 16 refs., 60 figs., 16 tabs

  11. The development of international safety standards on geological disposal

    International Nuclear Information System (INIS)

    McCartin, T.

    2005-01-01

    The IAEA is developing a set of safety requirements for geologic disposal to be used by both developers and regulators for planning, designing, operating, and closing a geologic disposal facility. Safety requirements would include quantitative criteria for assessing safety of geologic disposal facilities as well as requirements for development of the facility and the safety strategy including the safety case. Geologic disposal facilities are anticipated to be developed over a period of at least a few decades. Key decisions, e.g., on the disposal concept, siting, design, operational management and closure, are expected to be made in a series of steps. Decisions will be made based on the information available at each step and the confidence that may be placed in that information. A safety strategy is important for ensuring that at each step during the development of the disposal facility, an adequate understanding of the safety implications of the available options is developed such that the ultimate goal of providing an acceptable level of operational and post closure safety will be met. A safety case for a geologic disposal facility would present all the safety relevant aspects of the site, the facility design and the managerial and regulatory controls. The safety case and its supporting assessments illustrates the level of protection provided and shall give reasonable assurance that safety standards will be met. Overall, the safety case provides confidence in the feasibility of implementing the disposal system as designed, convincing estimates of the performance of the disposal system and a reasonable assurance that safety standards will be met. (author)

  12. Evolution of activities in international biological standardization since the early days of the Health Organisation of the League of Nations.

    Science.gov (United States)

    Sizaret, P

    1988-01-01

    The main activities in international biological standardization during the 18 years that followed the first international biological standardization meeting in London in 1921 were concerned with expressing the potencies of test preparations in comparison with reference materials. After the Second World War, however, it became clear that the testing of biological substances against international reference materials was only one among several measures for obtaining safe and potent products. The activities in international biological standardization were therefore widened so that, by the strict observance of specific manufacturing and control requirements, it was possible to gain further in safety and efficacy. At the end of 1987, 42 international requirements for biological substances were available and were being used as national requirements, sometimes after minor modification, by the majority of WHO's Member States. This is of utmost importance for the worldwide use of safe and potent biological products, including vaccines.

  13. The quantitative analysis of Bowen's kale by PIXE using the internal standard

    International Nuclear Information System (INIS)

    Navarrete, V.R.; Izawa, G.; Shiokawa, T.; Kamiya, M.; Morita, S.

    1978-01-01

    The internal standard method was used for non-destructive quantitative determination of trace elements by PIXE. The uniform distribution of the internal standard element in the Bowen's kale powder sample was obtained by using homogenization technique. Eleven elements are determined quantitatively for the sample prepared into self-supporting targets having lower relative standard deviations than non-self-supporting targets. (author)

  14. Assessment of Safety Standards for Automotive Electronic Control Systems

    Science.gov (United States)

    2016-06-01

    This report summarizes the results of a study that assessed and compared six industry and government safety standards relevant to the safety and reliability of automotive electronic control systems. These standards include ISO 26262 (Road Vehicles - ...

  15. Internal control activities in small Turkish companies

    Directory of Open Access Journals (Sweden)

    Ismail Bilgi

    2017-01-01

    Full Text Available The purpose of this paper is to present major outcomes from an empirical study concerning internal control activities in small Turkish companies, as to propose the improvement guidelines. Methods of analysis and synthesis, descriptive statistics, and statistical comparison were used. The collected data was processed with the help of the SPSS software. Тhe study is limited to organizations based in the European part of Turkey. Most of them operate in areas around large cities, such as Istanbul, Edirne, Kırklareli, and Tekirdağ. They employ on average 19-20 people and have a turnover of about TRY 3 million (≈€715,000, https://sdw.ecb.europa.eu on average. The survey concentrates mainly on small family businesses, which have been present on the market for more than ten years, with managers of good education and other characteristics that presuppose availability of internal control systems. The research results were used to compile main points of a SWOT analysis, as a part of the broader effort to help modernizing the internal control system in Turkish small businesses.

  16. United Nations International Drug Control Programme responds

    Directory of Open Access Journals (Sweden)

    Michael Platzer

    2002-01-01

    Full Text Available [First paragraph] We would like to reply to the article written by Axel Klein entitled, "Between the Death Penalty and Decriminalization: New Directions for Drug Control in the Commonwealth Caribbean" published in NWIG 75 (3&4 2001. We have noted a number of factual inaccuracies as well as hostile comments which portray the United Nations International Drug Control Programme in a negative light. This reply is not intended to be a critique of the article, which we find unbalanced and polemical, but rather an alert to the tendentious statements about UNDCP, which we feel should be corrected.

  17. Management Control in Major Brazilian Multiple Banks: the Impact of Internationalization and Convergence of Accounting Standards on the Control Systems

    Directory of Open Access Journals (Sweden)

    João Carlos Damasceno Reis

    2014-08-01

    Full Text Available This study verifies the impact caused by the processes of globalization and convergence to international accounting standards on the managerial control systems of the largest multiple banks that operate in Brazil. The study was exploratory in nature, with the use of the case study method and the application of questionnaires containing mostly open questions to upper tier executives of four major Brazilian banks. The analysis showed that globalization has resulted in improved control systems and widespread use of information technology. It was also found that the convergence to international accounting standards occurred properly, thanks to the steps taken by the Central Bank that aimed at an agile updating of the Brazilian accounting standards laid down for banks operating in Brazil, in line with international standards. In general, the researched banks did not report a significant impact of convergence to the IFRS on their management control systems; adherence to the international accounting standards has had more significant impacts on information systems, especially regarding the new reporting and transparency standards, rather than on management controls. This result signals that the management control systems of the four banks in the sample are in line with Anthony (1965’s vision, that is, that flexibility to adapt to every change in the external environment might actually increase risks of failure.

  18. Standardization of positive controls in diagnostic immunohistochemistry

    DEFF Research Database (Denmark)

    Torlakovic, Emina E; Nielsen, Søren; Francis, Glenn

    2015-01-01

    Diagnostic immunohistochemistry (dIHC) has been practiced for several decades, with an ongoing expansion of applications for diagnostic use, and more recently for detection of prognostic and predictive biomarkers. However, standardization of practice has yet to be achieved, despite significant...

  19. Choosing a standard reactor: International competition and domestic politics in Chinese nuclear policy

    International Nuclear Information System (INIS)

    Ramana, M.V.; Saikawa, Eri

    2011-01-01

    China has ambitious plans to expand its nuclear power capacity. One of the policy goals that high-level policymakers have desired is to base the nuclear program on a standardized reactor design. However, this has not materialized so far. By examining its nuclear reactor choices for individual projects, we argue that China’s policymaking process has been greatly influenced by international competition and domestic politics. Multiple international nuclear vendors are intent upon maintaining their respective niches in the expanding Chinese reactor market, and they have used various forms of economic and political pressure to achieve their objectives. On the other hand, China’s policymaking process is fragmented and the shifting power balances among powerful domestic actors do not allow a fixed path to be followed. Further, because of the high costs and potential profits involved, nuclear reactor choices in China have been driven not just by technical considerations but also by foreign and trade policy objectives. All of these make it unlikely that China will standardize the reactor type it constructs in the near future. -- Highlights: ► China’s nuclear power policymaking has been fragmented and without central control. ► Multiple domestic actors have pursued independent agendas. ► International nuclear vendors have intensely competed for Chinese reactor contracts. ► Economic, political and foreign policy goals have driven reactor contract decisions. ► China is unlikely to construct only a standardized reactor design.

  20. Social Innovations vs international Trade? Core labour standards and exports

    OpenAIRE

    Siroën, Jean-Marc

    2011-01-01

    Labour standards defined by the ILO in 1998 are universal but applied very differently in countries. They are much better respected in high income countries. However, the causality between labour standards and growth remains a controversial issue. The strategies of export-led growth might encourage developing countries to contain the rising process of standards, first to increase their unskilled labour endowments for strengthening their comparative advantage relative to complying countries, a...

  1. Evolving minimum standards in responsible international sperm donor offspring quota

    NARCIS (Netherlands)

    Janssens, Pim M. W.; Thorn, Petra; Castilla, Jose A.; Frith, Lucy; Crawshaw, Marilyn; Mochtar, Monique; Bjorndahl, Lars; Kvist, Ulrik; Kirkman-Brown, Jackson C.

    2015-01-01

    An international working group was established with the aim of making recommendations on the number of offspring for a sperm donor that should be allowable in cases of international use of his sperm. Considerations from genetic, psychosocial, operational and ethical points of view were debated. For

  2. Generalized internal model robust control for active front steering intervention

    Science.gov (United States)

    Wu, Jian; Zhao, Youqun; Ji, Xuewu; Liu, Yahui; Zhang, Lipeng

    2015-03-01

    Because of the tire nonlinearity and vehicle's parameters' uncertainties, robust control methods based on the worst cases, such as H ∞, µ synthesis, have been widely used in active front steering control, however, in order to guarantee the stability of active front steering system (AFS) controller, the robust control is at the cost of performance so that the robust controller is a little conservative and has low performance for AFS control. In this paper, a generalized internal model robust control (GIMC) that can overcome the contradiction between performance and stability is used in the AFS control. In GIMC, the Youla parameterization is used in an improved way. And GIMC controller includes two sections: a high performance controller designed for the nominal vehicle model and a robust controller compensating the vehicle parameters' uncertainties and some external disturbances. Simulations of double lane change (DLC) maneuver and that of braking on split- µ road are conducted to compare the performance and stability of the GIMC control, the nominal performance PID controller and the H ∞ controller. Simulation results show that the high nominal performance PID controller will be unstable under some extreme situations because of large vehicle's parameters variations, H ∞ controller is conservative so that the performance is a little low, and only the GIMC controller overcomes the contradiction between performance and robustness, which can both ensure the stability of the AFS controller and guarantee the high performance of the AFS controller. Therefore, the GIMC method proposed for AFS can overcome some disadvantages of control methods used by current AFS system, that is, can solve the instability of PID or LQP control methods and the low performance of the standard H ∞ controller.

  3. Monitoring the International Standardization Process Theoretical Choices and Methodological Tools

    Directory of Open Access Journals (Sweden)

    Brigitte Juanals

    2012-08-01

    Full Text Available Many organizations are in charge of global security management. This paper outlines and argues for the construction of a theoretical and methodological framework in order to critically assess the new technopolitics currently being developed in the field of global security and which are materialized in standards. The main purpose is to design both a methodology and specific text mining tools to investigate these standards. These tools will be implemented in a platform designed to provide cartographic representations of standards and to assist the navigation of an end-user through a corpus of standards.

  4. 75 FR 37732 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

    Science.gov (United States)

    2010-06-30

    ... National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines... hazardous air pollutants for existing stationary compression ignition reciprocating internal combustion... combustion engines. 40 CFR 63.6590 was amended by revising paragraphs (b)(1) and (3). Inadvertently...

  5. International laser safety standardization. From the European perspective with an emphasis on materials processing

    Energy Technology Data Exchange (ETDEWEB)

    Schulmeister, K [Div. of Life Sciences, Dept. of Radiation Protection, Oesterreichisches Forschungszentrum Seibersdorf, 2444 Seibersdorf (Austria)

    1997-08-01

    This report reviews international standards relevant to the safety of laser products and laser installations, with an emphasis on the safety of laser materials processing from the European perspective. In the first paragraphs an overview of the international standards organisations, their relative roles and ways of developing new standards is given. In the second part of the report, work currently underway in the respective standards committees is summarised and specific standards dealing with different aspects of laser safety are discussed. An appendix contains a list of standards organised in standards organisations (IEC, ISO and EN). (author)

  6. International laser safety standardization. From the European perspective with an emphasis on materials processing

    International Nuclear Information System (INIS)

    Schulmeister, K.

    1997-08-01

    This report reviews international standards relevant to the safety of laser products and laser installations, with an emphasis on the safety of laser materials processing from the European perspective. In the first paragraphs an overview of the international standards organisations, their relative roles and ways of developing new standards is given. In the second part of the report, work currently underway in the respective standards committees is summarised and specific standards dealing with different aspects of laser safety are discussed. An appendix contains a list of standards organised in standards organisations IEC, ISO and EN). (author)

  7. Have the auditors closed the expectation gap concerning evaluation of internal control?

    DEFF Research Database (Denmark)

    Birkholm, Peter; Holm, Claus

    internal controls intended for management directors, it provides a framework which explicitly deals with the interests of all parties involved (including auditors, board of directors and regulating bodies). The auditors took this into account by updating the particular auditing standard on internal control....... Realized discrepancies are identified and related to the necessary features of an integrated framework. The necessary features include (1) the definition of internal controls, (2) the components of internal control, (3) the criteria for evaluating internal control as stated by the auditors (4) the criteria...... for evaluating internal controls as stated by management, and (5) the integration of internal control evaluations from management and auditors. The paper provides evidence from an in-depth contents analysis comparing SAS No. 55 from 1988 with the COSO-report from 1992 and SAS No. 78 from 1995. The analysis...

  8. The Involvement of IRPA in the Development of ICRP and Other International Standards

    International Nuclear Information System (INIS)

    Webb, G.A.M.

    2001-01-01

    Full text: One of the main items in the IRPA constitution is to encourage the establishment and continuous review of universally acceptable radiation protection standards or recommendations through the international bodies concerned. This matter was discussed in depth at the Associate Societies Forum during the IRPA-10 Congress in Hiroshima in May 2000. A clear consensus existed among societies present that IRPA must play a larger role in the standard setting process. The mechanisms to fulfil this role have still to be elaborated but two processes have been identified. One for collecting and transmitting societies views on proposals by standards-setting bodies and another for quickly informing societies about the developments within international bodies on which IRPA acts as an observer. An example of the first was when IRPA invited its Member Societies to comment on Professor Roger Clarke's Controllable Dose proposal. The IRPA 10 Congress in May 2000 in Hiroshima provided the obvious focus for discussing the responses from the various Societies. These have been brought together in a report entitled IRPA Member Societies' Contributions to the development of new ICRP Recommendations and transmitted to ICRP by the IRPA Secretariat. The second procedure is more established as IRPA has observer status with a number of organisations including ICRP, IAEA and NEA and on interagency committees such as the Interagency Committee on Radiation Safety Standards (IACRS). (author)

  9. INTERMARS: User-controlled international management system

    Science.gov (United States)

    Schmitt, Harrison H.

    1986-01-01

    Existing international space law as well as the best interest of all nations are consistent with the establishment of a user-based international organization, herein called INTERMARS. INTERMARS would provide access to facilities and services at a Martian base which would be of high functional potential, quality, safety, and reliability. These opportunities would be available on an open and nondiscriminatory basis to all peaceful users and investors. INTERMARS is a model organization concept tailored to provide cooperative international management of a Martian base for the benefit of its members, users, and investors. Most importantly, INTERMARS would provide such management through a sharing of both sovereignty and opportunity rather then unilateral control by any one nation or set of competing nations. Through an Assembly of Parties, a Board of Governors, a Board of Users and Investors, and a Director General, INTERMARS would meet its primary goal as it would be in the self-interest of all members, users, and investors to do so. The internal structure and philosophy of INTERMARS would provide not only for all participants to have representation in decisions affecting its activities, but also would insure effective and responsive management. Surely this is the precedent wished for, to establish for mankind at the now not-so-distant shores of the new ocean of space.

  10. 49 CFR 192.477 - Internal corrosion control: Monitoring.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Internal corrosion control: Monitoring. 192.477... Control § 192.477 Internal corrosion control: Monitoring. If corrosive gas is being transported, coupons... internal corrosion. Each coupon or other means of monitoring internal corrosion must be checked two times...

  11. International Financial Reporting Standards Convergence and Quality of Accounting Information: Evidence from Indonesia

    OpenAIRE

    Yusrina, Hasyyati; Mukhtaruddin, Mukhtaruddin; Fuadah, Luk Luk; Sulong, Zunaidah

    2017-01-01

    The International Financial Reporting Standards (IFRS) initiated by International Accounting Standard Board (IASB) are principle-based standard that require extensive disclosure of financial statements and accounting information as compared to prior standard that is the Generally Accepted Accounting Principles (GAAP) to better reflect the overall quality of company’s performance. Therefore, the IFRS convergence is expected to improve the reliability of financial reporting by limiting opportun...

  12. Fairness : A Dire International Tax Standard with No Meaning?

    NARCIS (Netherlands)

    Burgers, I.J.J.; Mosquera, Valderrama I.J.

    2017-01-01

    In their discussions on corporate income tax systems the International Organizations (IOs) OECD, UN, IMF and World Bank, Supranational Organizations (SOs), Non-Governmental Organizations (NGOs), associations of practitioners and Governments often refer to the concept of fairness without proper

  13. PERFORMANCE IN INTERNAL CONTROL AND RISK MANAGEMENT

    Directory of Open Access Journals (Sweden)

    JELER (POPA IOANA

    2017-06-01

    Full Text Available The purpose of this article is to highlight the importance of internal control and risk management. In practice, economic entities meet a variety of risks that have the origins from the internal environment or the external one. Although there are different of views on addressing the concept of risk - threats or opportunities, event or action, accordingly uncertain, proposed by specialists in risk management in this article we try to present these issues and identify techniques to counter risks occurrence. In this article we present also means managing risk and why needs to be implemented at institutional level a risk management. The paper concludes by highlight the role of efficient risk management in the company’s management and company's activities.

  14. Importance of Internal Audit and Internal Control in an organization - Case Study

    OpenAIRE

    Bubilek, Olga

    2017-01-01

    This research is a descriptive case study of a company. It presents concepts of the internal audit and internal control based on an example of a Finnish company. The research examines the role and importance that internal audit and internal controls have in an organization. The main research question is “What is the role and importance of internal audit and internal control in an organization” Additional sub-questions relating to the case company that will allow for better understanding of...

  15. Standardization of radioactive gaseous waste radiation monitoring equipment from the International Electrotechnical Commission

    International Nuclear Information System (INIS)

    Fitoussi, L.

    1983-01-01

    After having introduced the works performed by the International Electrotechnical Commission, the authors report on the results of the studies carried out to achieve the standardization of the radiation monitoring equipment concerning the control of the gaseous waste from nuclear installations. The authors present the most interesting aspects of the regulations and recommendations, which include not only a description of the minimum permissible levels of sensitivity for the monitors, but also a description of the set of assays to be established in order to verify the level of performance of the monitors

  16. Efficiency of Management Systems, Based on International Standards

    Directory of Open Access Journals (Sweden)

    Elena B. Gafforova

    2012-03-01

    Full Text Available The article considers major trends of management systems standardization development and efficiency. The authors determine possible structure of effects in the process of integrated management systems implementation.

  17. International cooperative effort to establish dosimetry standardization for radiation processing

    International Nuclear Information System (INIS)

    Farrar, Harry IV

    1990-01-01

    Radiation processing is a rapidly developing technology with numerous applications in food treatment, sterilization, and polymer modification. The effectiveness of the process depends, however, on the proper application of dose and its measurement. These aspects are being considered by a wide group of experts from around the world who have joined together to write a comprehensive set of standards for dosimetry for radiation processing. Originally formed in 1984 to develop standards for food processing dosimetry, the group has now expanded into a full subcommittee of the American Society for Testing and Materials (ASTM), with 97 members from 19 countries. The scope of the standards now includes dosimetry for all forms and applications of radiation processing. To date, the group has completed and published four standards, and is working on an additional seven. Three are specifically for food applications and the others are for all radiation applications, including food processing. Together, this set of standards will specify acceptable guidelines and methods for accomplishing the required irradiation treatment. This set will be available for adoption by national regulatory agencies or other standards-setting organizations for their procedures and protocols. (author)

  18. The Principles of Organization of Internal Control of Companies

    Directory of Open Access Journals (Sweden)

    Panteleiev

    2017-02-01

    Full Text Available The question to give a convincing assessment of the Rules of the internal controls and present them in the form of principles of organization of internal control. Since the final decision in the form of an exhaustive list and universal principles of internal control is no scientific research continues these principles. It is necessary to examine the logic of the main provisions of the organization's internal control due consideration of the requirements of international practice controls and propose principles of internal control. For this purpose, conducted a critical analysis of the main provisions of internal controls contained in the publications and in the regulations on internal control proceedings. Synthesis of articles of authors of lead scientific and practical journal Ukraine "Accounting and Auditing" for the 1994-2015 biennium pointed out that despite the coverage of current journal articles provisions, principles, requirements, rules and other modern techniques. On internal control and comprehensive set of reasonable response to the organization and classification of internal control is absent. This leads to continue the search key components of the organization's internal control. The above basic concepts in publications on the organization of internal control were used in the formation of a set of principles of control. According to the requirements of the OECD field of internal control includes risk management, cost control, change in control, complete information to guarantee the effectiveness of internal control systems, providing the ability to make decisions and so on. COSO model contains an exhaustive list of five components. The results of the questionnaire trainees have provided compelling arguments for classifying and establishing relevant principles of organization and internal controls were rejected. A list of the basic principles of the organization of internal control, which consists of 25 elements that are shaped

  19. Globalization quickly increased need for moving from local to international standards

    Energy Technology Data Exchange (ETDEWEB)

    Cappelli, Cataldo

    2005-07-01

    'Standardization' quickly changed in the past few years, due to the market's globalization that needs international standards as important instruments in eliminating technical barriers to trade. The 'Petroleum Sector' chose moving to international standards jointly processed by the International Organization for Standardization (ISO) and the American Petroleum Institute (API) that played the role of historical reference. Taking into account that oil industry wants only one Standard worldwide used, also Europe decided for adopting these ISO Standards as European Standards. The result is much better considering that also Russia and China seem to adopt these ISO documents as their national standards. It is so becoming much more significant the 'motto' that ISO TC 67 'Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries' adopted for its standardization activities: 'Do it once, do it right, do it internationally'. Examples of such international Standards worldwide used as National Standards are: ISO 11960:2004 - 'Steel pipes for use as casing or tubing for wells' and; ISO/DIS 3183 - 'Steel pipe for pipeline transportation systems' (under preparation). Standardization has so grown from technical to management tool and countries are also moving, including standards in more areas of its legislations. (author)

  20. Globalization quickly increased need for moving from local to international standards

    Energy Technology Data Exchange (ETDEWEB)

    Cappelli, Cataldo

    2005-07-01

    'Standardization' quickly changed in the past few years, due to the market's globalization that needs international standards as important instruments in eliminating technical barriers to trade. The 'Petroleum Sector' chose moving to international standards jointly processed by the International Organization for Standardization (ISO) and the American Petroleum Institute (API) that played the role of historical reference. Taking into account that oil industry wants only one Standard worldwide used, also Europe decided for adopting these ISO Standards as European Standards. The result is much better considering that also Russia and China seem to adopt these ISO documents as their national standards. It is so becoming much more significant the 'motto' that ISO TC 67 'Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries' adopted for its standardization activities: 'Do it once, do it right, do it internationally'. Examples of such international Standards worldwide used as National Standards are: ISO 11960:2004 - 'Steel pipes for use as casing or tubing for wells' and; ISO/DIS 3183 - 'Steel pipe for pipeline transportation systems' (under preparation). Standardization has so grown from technical to management tool and countries are also moving, including standards in more areas of its legislations. (author)

  1. Process Control System Cyber Security Standards - An Overview

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Evans; V Stanley Scown; Rolf Carlson; Shabbir Shamsuddin; George Shaw; Jeff Dagle; Paul W Oman; Jeannine Schmidt

    2005-10-01

    The use of cyber security standards can greatly assist in the protection of critical infrastructure by providing guidelines and requisite imperatives in the implementation of computer-controlled systems. These standards are most effective when the engineers and operators using the standards understand what each of the standards addresses and does not address. This paper provides a review and comparison of ten documents dealing with control system cyber security. It is not meant to be a complete treatment of all applicable standards; rather, this is an exemplary analysis showing the benefits of comparing and contrasting differing documents.

  2. A within-trial cost-effectiveness analysis of primary care referral to a commercial provider for weight loss treatment, relative to standard care—an international randomised controlled trial

    Science.gov (United States)

    Fuller, N R; Colagiuri, S; Schofield, D; Olson, A D; Shrestha, R; Holzapfel, C; Wolfenstetter, S B; Holle, R; Ahern, A L; Hauner, H; Jebb, S A; Caterson, I D

    2013-01-01

    Background: Due to the high prevalence of overweight and obesity there is a need to identify cost-effective approaches for weight loss in primary care and community settings. Objective: We evaluated the cost effectiveness of two weight loss programmes of 1-year duration, either standard care (SC) as defined by national guidelines, or a commercial provider (Weight Watchers) (CP). Design: This analysis was based on a randomised controlled trial of 772 adults (87% female; age 47.4±12.9 years; body mass index 31.4±2.6 kg m−2) recruited by health professionals in primary care in Australia, United Kingdom and Germany. Both a health sector and societal perspective were adopted to calculate the cost per kilogram of weight loss and the ICER, expressed as the cost per quality adjusted life year (QALY). Results: The cost per kilogram of weight loss was USD122, 90 and 180 for the CP in Australia, the United Kingdom and Germany, respectively. For SC the cost was USD138, 151 and 133, respectively. From a health-sector perspective, the ICER for the CP relative to SC was USD18 266, 12 100 and 40 933 for Australia, the United Kingdom and Germany, respectively. Corresponding societal ICER figures were USD31 663, 24 996 and 51 571. Conclusion: The CP was a cost-effective approach from a health funder and societal perspective. Despite participants in the CP group attending two to three times more meetings than the SC group, the CP was still cost effective even including these added patient travel costs. This study indicates that it is cost effective for general practitioners (GPs) to refer overweight and obese patients to a CP, which may be better value than expending public funds on GP visits to manage this problem. PMID:22929209

  3. Controlling engineering project changes for multi-unit, multi-site standardized nuclear power plants

    International Nuclear Information System (INIS)

    Randall, E.; Boddeker, G.; McGugin, H.; Strother, E.; Waggoner, G.

    1978-01-01

    Multibillioin dollar multiple nuclear power plant projects have numerous potential sources of engineering changes. The majority of these are internally generated changes, client generated changes, and changes from construction, procurement, other engineering organizations, and regulatory organizations. For multiunit, multisite projects, the use of a standardized design is cost effective. Engineering changes can then be controlled for a single standardized design, and the unit or site unique changes can be treated as deviations. Once an effective change procedure is established for change control of the standardized design, the same procedures can be used for control of unit or site unique changes

  4. OSHA Bloodborne Pathogens Standards Exposure Control Plan

    Science.gov (United States)

    Luhrs, Caro Elise; Teitelbaum, Rita

    1993-01-01

    The Hummer Associates Exposure Control Plan is designed to reduce significant occupational exposure to bloodborne pathogens and infectious materials for Hummer Associates health care personnel. Under universal precautions, all patients and all body fluids are considered potentially infectious for bloodborne pathogens. Medical personnel need not be at increased risk if universal precautions are correctly understood and followed. This program covers all employees who could reasonably anticipate contact with blood or other potentially infectious materials during the performance of their job responsibilities. Although HIV and hepatitis B are mentioned most often, this program applies to all bloodborne diseases. The two main components needed to implement this program are universal precautions and engineering/work practice controls. This program covers all employees who may have occupational exposure to blood or other potentially infectious materials. Other aspects of this program are discussed.

  5. International cooperative effort to establish dosimetry standardization for radiation processing

    International Nuclear Information System (INIS)

    Farrar, H. IV.

    1989-01-01

    Radiation processing is a rapidly developing technology with numerous applications in food treatment, sterilization, and polymer modification. The effectiveness of the process depends, however, on the proper application of dose and its measurement. These aspects are being considered by a wide group of experts from around the world who have joined together to write a comprehensive set of standards for dosimetry for radiation processing. Originally formed in 1984 to develop standards for food processing dosimetry, the group has now expanded into a full subcommittee of the American Society for Testing and Materials (ASTM), with 97 members from 19 countries. The scope of the standards now includes dosimetry for all forms of radiation processing. The group has now completed and published four standards, and is working on an additional seven. Three are specifically for food applications and the others are for all radiation applications, including food processing. Together, this set of standards will specify acceptable guidelines and methods for accomplishing the required irradiation treatment, and will be available for adoption by national regulatory agencies in their procedures and protocols. 1 tab

  6. Traditional Knowledge and Patent Protection: Conflicting Views On International Patent Standards

    Directory of Open Access Journals (Sweden)

    A Andrzejewski

    2010-12-01

    Full Text Available As diseases continue to spread around the globe, pharmaceutical and biotech companies continue to search for new and better drugs to treat them. Most of these companies have realised that useful compounds for these purposes may be found in the natural resources that indigenous and local communities use. And yet, even though the importance of these biological resources to global health and economic livelihood is well recognised, the legal ownership and control of this traditional knowledge is still very controversial. This article undertakes a comparative analysis of American and European, as well as international legal regulations on patent law and traditional knowledge. Key questions include: What is traditional knowledge? How have the national patent laws of these countries treated the protection of plant variety and plant genetic resources? What are the existing international standards for patents, and what implications do they have for protecting traditional knowledge? And finally, what protection systems are emerging for the future?

  7. International Review of Frameworks for Standard Setting & Labeling Development

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Khanna, Nina Zheng [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fridley, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Romankiewicz, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-09-01

    As appliance energy efficiency standards and labeling (S&L) programs reach a broader geographic and product scope, a series of sophisticated and complex technical and economic analyses have been adopted by different countries in the world to support and enhance these growing S&L programs. The initial supporting techno-economic and impact analyses for S&L development make up a defined framework and process for setting and developing appropriate appliance efficiency standards and labeling programs. This report reviews in-depth the existing framework for standards setting and label development in the well-established programs of the U.S., Australia and the EU to identify and evaluate major trends in how and why key analyses are undertaken and to understand major similarities and differences between each of the frameworks.

  8. Convergence Of US-GAAP And International Standards: The Critical Issues

    OpenAIRE

    Steven W. Smalt; John P. McAllister

    2011-01-01

    This paper provides readers with: 1)An update on an institutional change that will focus the attention of worldwide accounting and financial reporting standard setters on the convergence of international and national standards, and 2)An analysis of in-process issues in the international accounting arena that will be critical to the success / failure of this convergence effort.

  9. Discourse Surrounding the International Education Standards for Professional Accountants (IES): A Content Analysis Approach

    Science.gov (United States)

    Sugahara, Satoshi; Wilson, Rachel

    2013-01-01

    The development and implementation of the International Education Standards (IES) for professional accountants is currently an important issue in accounting education and for educators interested in a shift toward international education standards more broadly. The purpose of this study is to investigate professional and research discourse…

  10. ANALYSIS OF THE IMPLEMENTATION OF INTERNATIONAL FINANCIAL REPORTING STANDARDS BY COUNTRIES WITH ECONOMIES IN TRANSITION

    Directory of Open Access Journals (Sweden)

    B. Zasadnyi

    2013-08-01

    Full Text Available The article deals with experience of application of international financial reporting standards in different countries with economies in transition. The main advantages and disadvantages of the implementation of international financial reporting standards for financial reporting for Ukrainian companies are based on this experience.

  11. International standards to document remaining autonomic function after spinal cord injury

    DEFF Research Database (Denmark)

    Krassioukov, Andrei; Biering-Sørensen, Fin; Donovan, William

    2012-01-01

    This is the first guideline describing the International Standards to document remaining Autonomic Function after Spinal Cord Injury (ISAFSCI). This guideline should be used as an adjunct to the International Standards for Neurological Classification of Spinal Cord Injury (ISNCSCI) including the ...

  12. 78 FR 14457 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

    Science.gov (United States)

    2013-03-06

    ... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Parts 60 and 63 [EPA-HQ-OAR-2008-0708, FRL-9756-4] RIN 2060-AQ58 National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines; New Source Performance Standards for Stationary Internal Combustion Engines Correction In rule...

  13. 76 FR 12863 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

    Science.gov (United States)

    2011-03-09

    ... National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines... combustion engines. The final rule was published on August 20, 2010. This direct final action amends certain... Emission Standards for Hazardous Air Pollutant for Stationary Reciprocating Internal Combustion Engines...

  14. Turbine Energy Evaluation by internal dimensional control

    International Nuclear Information System (INIS)

    Mediavilla, F.

    2000-01-01

    To maintain the optimum thermal performance in a high level throughout the life of the turbines requires a good testing program, proper analysis of the test data, and a steam path audit during turbine overhauls. If from operating data analysis collected during the performance test before the outage shows that the efficiency of the turbine is coming down, the steam path audit, that is an internal inspection and a dimensional control of the internals, identity and quantity causes of performance degradation like, seal leakages, excessive clearances, solid particle erosion damages, blades deposits and other losses. The steam path audit assigns the heat rate penalties associated with each of these individual losses to the total degradation. This are used to make cost-effective maintenance decisions during the course of the overhaul. After repairs, a closing steam path audit is conducted during the re assembly of the turbine in order to predict return to service condition of the machine and to provide a quality control check on outage repairs. (Author)

  15. Brief International Cognitive Assessment for MS (BICAMS): international standards for validation.

    OpenAIRE

    Benedict, R; Amato, Mp; Boringa, J; Brochet, B; Foley, F; Fredrikson, S; Hamalainen, P; Hartung, H; Krupp, L; Penner, I; Reder, A; Langdon, D.

    2012-01-01

    An international expert consensus committee recently recommended a brief battery of tests for cognitive evaluation in multiple sclerosis. The Brief International Cognitive Assessment for MS (BICAMS) battery includes tests of mental processing speed and memory. Recognizing that resources for validation will vary internationally, the committee identified validation priorities, to facilitate international acceptance of BICAMS. Practical matters pertaining to implementation across different langu...

  16. 47 CFR 90.473 - Operation of internal transmitter control systems through licensed fixed control points.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Operation of internal transmitter control... Transmitter Control Internal Transmitter Control Systems § 90.473 Operation of internal transmitter control systems through licensed fixed control points. An internal transmitter control system may be operated...

  17. Improving the efficiency of quantitative (1)H NMR: an innovative external standard-internal reference approach.

    Science.gov (United States)

    Huang, Yande; Su, Bao-Ning; Ye, Qingmei; Palaniswamy, Venkatapuram A; Bolgar, Mark S; Raglione, Thomas V

    2014-01-01

    The classical internal standard quantitative NMR (qNMR) method determines the purity of an analyte by the determination of a solution containing the analyte and a standard. Therefore, the standard must meet the requirements of chemical compatibility and lack of resonance interference with the analyte as well as a known purity. The identification of such a standard can be time consuming and must be repeated for each analyte. In contrast, the external standard qNMR method utilizes a standard with a known purity to calibrate the NMR instrument. The external standard and the analyte are measured separately, thereby eliminating the matter of chemical compatibility and resonance interference between the standard and the analyte. However, the instrumental factors, including the quality of NMR tubes, must be kept the same. Any deviations will compromise the accuracy of the results. An innovative qNMR method reported herein utilizes an internal reference substance along with an external standard to assume the role of the standard used in the traditional internal standard qNMR method. In this new method, the internal reference substance must only be chemically compatible and be free of resonance-interference with the analyte or external standard whereas the external standard must only be of a known purity. The exact purity or concentration of the internal reference substance is not required as long as the same quantity is added to the external standard and the analyte. The new method reduces the burden of searching for an appropriate standard for each analyte significantly. Therefore the efficiency of the qNMR purity assay increases while the precision of the internal standard method is retained. Copyright © 2013 Elsevier B.V. All rights reserved.

  18. New International Reference Standards of Voltage and Resistance.

    Science.gov (United States)

    Sirvastava, V. P.

    1991-01-01

    The introduction of the quantum standards of resistance and voltage, based on the Quantum Hall Effect (QHE) and the Josephson Effect, can be used to establish highly reproducible and uniform representations of the ohm and volt worldwide. Discussed are the QHE and the Josephson Effect. (KR)

  19. Teacher Assessment Literacy: A Review of International Standards and Measures

    Science.gov (United States)

    DeLuca, Christopher; LaPointe-McEwan, Danielle; Luhanga, Ulemu

    2016-01-01

    Assessment literacy is a core professional requirement across educational systems. Hence, measuring and supporting teachers' assessment literacy have been a primary focus over the past two decades. At present, there are a multitude of assessment standards across the world and numerous assessment literacy measures that represent different…

  20. [The International Standards for Tuberculosis Care (ISTC): what is the importance for Japan?].

    Science.gov (United States)

    Fujiwara, Paula I

    2008-07-01

    In 2005, the World Health Assembly resolved that all Member States should ensure that all persons with tuberculosis (TB) "have access to the universal standard of care based on proper diagnosis, treatment and reporting consistent with the DOTS strategy..." The purpose of the International Standards for Tuberculosis Care (ISTC) is to define the widely accepted level of care of persons either suspected of, or diagnosed with, TB by all health practitioners, especially those in the private sector, who often lack guidance and systematic evaluation of outcomes provided by government programs. Since their publication in 2006 on World TB Day, the standards have been endorsed by the major international health organizations as well as many country-level professional societies. The intention is to complement local and national control polices consistent with those of the World Health Organization: they are not intended to replace local guidelines, but are written to accommodate local differences in practice. The ISTC comprise seventeen evidence-based standards on tuberculosis diagnosis and treatment, as well as the responsibility of the public health sector. These are based on the basic principles of TB care: prompt and accurate diagnosis, standardized treatment regimens of proven efficacy, appropriate treatment support and supervision, monitoring of response to treatment and the carrying out of essential public health responsibilities. The relevance of the ISTC to the Japanese context is highlighted, in terms of when persons should be suspected of TB; the appropriate diagnostic modalities, including the use of chest radiographs; the advantages of fixed dose combinations; the importance of follow-up laboratory tests to document response to treatment, the importance of recordkeeping and reporting to public health authorities, the value of HIV testing of TB patients and the use of anti-retrovirals for those dually infected; and the assessment of drug resistance and the

  1. Help for the Developers of Control System Cyber Security Standards

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Evans

    2008-05-01

    A Catalog of Control Systems Security: Recommendations for Standards Developers (Catalog), aimed at assisting organizations to facilitate the development and implementation of control system cyber security standards, has been developed. This catalog contains requirements that can help protect control systems from cyber attacks and can be applied to the Critical Infrastructures and Key Resources of the United States and other nations. The requirements contained in the catalog are a compilation of practices or various industry bodies used to increase the security of control systems from both physical and cyber attacks. They should be viewed as a collection of recommendations to be considered and judiciously employed, as appropriate, when reviewing and developing cyber security standards for control systems. The recommendations in the Catalog are intended to be broad enough to provide any industry using control systems the flexibility needed to develop sound cyber security standards specific to their individual security requirements.

  2. Economic consequences of the adoption of the International Financial Reporting Standards: evidences in the research literature

    OpenAIRE

    Irina-Doina Pãºcan; Ramona Neag

    2015-01-01

    Along with the economic globalization, the international accounting regulation bodies faced the need to issue internationally accepted global accounting standards. The effect was the issuance and the widespread of the International Financial Reporting Standards (IFRS). At European level, the IFRS gained legitimacy in 2002, when the European Parliament and Council have decided that all European publicly traded entities must prepare their consolidated financial statements in accordance with IFR...

  3. Development of Proliferation Resistance Assessment Methodology Based on International Standards

    International Nuclear Information System (INIS)

    Lee, Yong Deok; Lee, Jung Won; Lee, Kwang Seok

    2009-03-01

    Proliferation resistance is one of the requirement to be met in GEN IV and INPRO for next generation nuclear energy system. Internationally, the evaluation methodology on PR had been already initiated from 1980, but the systematic development was started at 2000s. In Korea, for the export of nuclear energy system and the increase of international credibility and transparence of domestic nuclear system and fuel cycle development, the independent development of PR evaluation methodology was started in 2007 as a nuclear long term R and D project and the development is being performed for the model of PR evaluation methodology. In 1st year, comparative study of GEN-IV/INPRO, PR indicator development, quantification of indicator and evaluation model development, analysis of technology system and international technology development trend had been performed. In 2nd year, feasibility study of indicator, allowable limit of indicator, review of technical requirement of indicator were done. The results of PR evaluation must be applied in the beginning of conceptual design of nuclear system. Through the technology development of PR evaluation methodology, the methodology will be applied in the regulatory requirement for authorization and permission to be developed

  4. The International Standards for Solar Thermal Collectors and Components as a Medium of Quality Assurance

    International Nuclear Information System (INIS)

    Alkishriwi, Nouri; Schorn, Christian A.; Theis, Danjana

    2014-01-01

    regarding a product are fulfilled. In a certification process based on specified certification rules an authorized certification body is confirming that a solar thermal product has passed performance tests, reliability tests and further requirements according to the standards. In Europe a certification body holds an accreditation according to EN45011. At international level the standard ISO/IEC17065 is in force. Test results as a basis for product certification are determined by solar thermal test laboratories. The implementation and the business operation of such a solar thermal test laboratory is an important element within the national/regional solar thermal market. To ensure the quality of the products and to attend the role of an observer on the market, the test facility has to fulfill a number of requirements. Besides the necessary technical equipment and the implementation of tests in accordance with the various national and international standards, the laboratory shall realize a quality management system to guarantee the quality of tests and services. Based on the technical equipment, the testing scope and an implemented Quality Management System (QMS), the test laboratory can achieve an accreditation according to ISO/IEC17025 as basis for independent third party testing. Independent testing and evaluation of solar thermal collectors and components like hot water stores and controllers offers an important medium for quality assurance. To guarantee a high degree of product quality and consumer protection a quality system for the solar thermal market is necessary. Core of the quality assurance of a functioning solar thermal market are the national standards body, which is developing standards and regulations as a working basis ill technical committees, the national metrology institute that guarantees the traceability of measurements on fundamental and natural constants, and finally the national accreditation body which ensures the conformity of the various actors to a

  5. National Transportation Safety Board : weak internal control impaired financial accountability

    Science.gov (United States)

    2001-09-28

    The U. S. General Accounting Office (GAO) was asked to review the National Transportation Safety Board's (NTSB) internal controls over selected types of fiscal year expenditures. They were asked to determine whether internal control weaknesses were a...

  6. Kandungan Prinsip Konservatisme dalam Standar Akuntansi Keuangan Berbasis IFRS (International Financial Reporting Standard)

    OpenAIRE

    Ahmad Juanda

    2012-01-01

    Kandungan Prinsip Konservatisme DalamStandar Akuntansi Keuangan Berbasis IFRS(International Financial Reporting Standard)Ahmad JuandaStaf Pengajar Jurusan Akutansi, Fakultas Ekonomi dan BisnisUniversitas Muhammadiyah This study aims to reveal the content of the principle of conservatism contained in financial accounting standards (GAAP) results of the convergence of International Financial Reporting Standards (IFRS). The use of the principle of conservatism still...

  7. New international and national standards concerning quality systems

    International Nuclear Information System (INIS)

    Petrick, K.; Reihlen, H.

    1987-01-01

    The history and contents of the latest standards DIN ISO 9000 through DIN ISO 9004 concerning quality systems are outlined. Information is given referring to the establishment of an in-house quality system, and to quality assurance requirements put down in a three-step quality assurance system for contractual purposes. The services available for certification of quality systems by the 'DQS' and legal aspects are mentioned. (HP)

  8. The First International Records Management Standard: A Point of View

    Directory of Open Access Journals (Sweden)

    Fahrettin Özdemirci

    2003-09-01

    Full Text Available In this work, The First Internatonal Records Management Standart ISO 15489 for the use of records management is examined in regard to its preparatory stu­dies, its content, and its relation and contribution to archive management. In adi- tion to these, the provisions of the standard that can contribute to handling of Turkish records are mentioned and recommendations are offered for steps to be taken.

  9. Recommendations for the Technical Infrastructure for Standardized International Rights Statements

    OpenAIRE

    Charles, Valentine; Cowles, Esmé; Estlund, Karen; Isaac, Antoine; Johnson, Tom; Matienzo, Mark A.; Peiffer, Patrick; Urban, Richard J.; Zeinstra, Maarten

    2015-01-01

    This white paper is the product of a joint Digital Public Library of America (DPLA)-Europeana working group organized to develop minimum rights statement metadata standards for organizations that contribute to DPLA and Europeana. This white paper deals specifically with the technical infrastructure of a common namespace (rightsstatements.org) that hosts the rights statements to be used by (at minimum) the DPLA and Europeana. These recommendations for a common technical infrastructure for righ...

  10. Progress in standardization for ITER Remote Handling control system

    International Nuclear Information System (INIS)

    Hamilton, David Thomas; Tesini, Alessandro; Ranz, Roberto; Kozaka, Hiroshi

    2014-01-01

    Graphical abstract: - Highlights: • Standard parts specified for ITER Remote Handling (RH) control system. • Standard approach for VR modeling of structural deformations in real-time. • RH Core System produced as standard platform for RH controller applications. • Synthetic Viewing investigated and demonstrated. • Structured language defined for RH operation procedures and motion sequences. - Abstract: An integrated control system architecture has been defined for the ITER Remote Handling (RH) equipment systems, and work has been continuing to develop and validate standards for this architecture. Evaluations of standard parts and a standard control room work-cell have contributed to an update of the RH Control System Design Handbook, while R and D activities have been carried out to validate concepts for standard solutions to ITER RH problems: the use of a standard master arm with different slave arms, the achievement of high accuracy tracking of RH operations within virtual reality, and condition monitoring of RH equipment systems. The standardization efforts have been consolidated through the development of a freely distributable software platform to support the adoption of the ITER RH standards. The RH Core System installs on top of the CODAC Core System and provides the basic platform for the development of ITER RH equipment controller applications. The standardization work has continued in the areas of RH viewing, network communication protocols, and a structured language for programming ITER RH operations. Prototyping has been done on high-level control system applications, and R and D has been carried out in the area of synthetic viewing for ITER RH. These developments will be reflected in a new version of the RH Core System to be produced during 2013

  11. Progress in standardization for ITER Remote Handling control system

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, David Thomas, E-mail: david.hamilton@iter.org [ITER Organization, Route de Vinon, 13115 St. Paul-lez-Durance (France); Tesini, Alessandro [ITER Organization, Route de Vinon, 13115 St. Paul-lez-Durance (France); Ranz, Roberto [Fusion for Energy, Torres Diagonal Litoral B3, Josep Pla 2, 08019 Barcelona (Spain); Kozaka, Hiroshi [Japan Atomic Energy Agency, Fusion Research and Development Directorate, Naka, Ibaraki-ken 311-0193 (Japan)

    2014-10-15

    Graphical abstract: - Highlights: • Standard parts specified for ITER Remote Handling (RH) control system. • Standard approach for VR modeling of structural deformations in real-time. • RH Core System produced as standard platform for RH controller applications. • Synthetic Viewing investigated and demonstrated. • Structured language defined for RH operation procedures and motion sequences. - Abstract: An integrated control system architecture has been defined for the ITER Remote Handling (RH) equipment systems, and work has been continuing to develop and validate standards for this architecture. Evaluations of standard parts and a standard control room work-cell have contributed to an update of the RH Control System Design Handbook, while R and D activities have been carried out to validate concepts for standard solutions to ITER RH problems: the use of a standard master arm with different slave arms, the achievement of high accuracy tracking of RH operations within virtual reality, and condition monitoring of RH equipment systems. The standardization efforts have been consolidated through the development of a freely distributable software platform to support the adoption of the ITER RH standards. The RH Core System installs on top of the CODAC Core System and provides the basic platform for the development of ITER RH equipment controller applications. The standardization work has continued in the areas of RH viewing, network communication protocols, and a structured language for programming ITER RH operations. Prototyping has been done on high-level control system applications, and R and D has been carried out in the area of synthetic viewing for ITER RH. These developments will be reflected in a new version of the RH Core System to be produced during 2013.

  12. The International Accounting Standards Board’s Progress in Promoting Judgement Through Objectives-Oriented Accounting Standards

    OpenAIRE

    Tanja Lakovic; Jayne Fuglister

    2013-01-01

    This study analyzes how the International Accounting Standards Board (IASB) promotes professional judgement by issuing objectives-oriented accounting standards and exposure drafts.  We focus on the the role of judgement as outlined in Phase I of the IASB Conceptual Framework (CF), Chapter 1, “Objective of General Purpose Financial Statements” and Chapter 3, “Qualitative Characteristics of Useful Financial Information” (IASB 2010). We discuss how the framework, when viewed through the prism of...

  13. Internal quality control: planning and implementation strategies.

    Science.gov (United States)

    Westgard, James O

    2003-11-01

    The first essential in setting up internal quality control (IQC) of a test procedure in the clinical laboratory is to select the proper IQC procedure to implement, i.e. choosing the statistical criteria or control rules, and the number of control measurements, according to the quality required for the test and the observed performance of the method. Then the right IQC procedure must be properly implemented. This review focuses on strategies for planning and implementing IQC procedures in order to improve the quality of the IQC. A quantitative planning process is described that can be implemented with graphical tools such as power function or critical-error graphs and charts of operating specifications. Finally, a total QC strategy is formulated to minimize cost and maximize quality. A general strategy for IQC implementation is recommended that employs a three-stage design in which the first stage provides high error detection, the second stage low false rejection and the third stage prescribes the length of the analytical run, making use of an algorithm involving the average of normal patients' data.

  14. The international standard for protection from ionizing radiation and safety of radiation sources

    Energy Technology Data Exchange (ETDEWEB)

    Schlesinger, T [Israel Atomic Energy Commission, Yavne (Israel). Soreq Nuclear Research Center

    1995-06-01

    This document is a review in hebrew of the new 1994 international standard of the IAEA. The new standard title is `Basic safety standards for radiation protection and for the safety of radiation sources`, which were published in the ICRP Pub. 9.

  15. International and national radiation protection standards and recommendations

    International Nuclear Information System (INIS)

    Swindon, T.N.

    1989-01-01

    The recommendations of the International Commission on Radiological Protection (ICRP) and their basis are discussed with particular emphasis on the extensive review of its earlier recommendations undertaken by the ICRP during the 1970s. The new recommendations issued in 1977 after this review are described. The dose limits for various organs and tissues before and after 1977 are compared. The optimization principle contained in the 1977 recommendations is assessed. The implementation of the 1977 recommendations, the subsequent changes to them and the ICRP's 1987 statement on cancer risk assessments are discussed. The National Radiological Protection Board's October 1987 radiation protection recommendations are outlined. 8 refs., 1 fig

  16. Nuclear power proliferation. Problems of international control

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, B [International Inst. for Environment and Development, London (UK)

    1977-09-01

    The nuclear industry is experiencing a multiple crisis in which economic, technical and ethical aspects are blended inextricably. Nuclear hardware costs have everywhere soared far beyond inflation in the last five years, largely as a result of delays in programme completion arising from problems of reactor and fuel cycle. Meanwhile, partly as a result of this cost escalation, there is widespread and growing doubt as to whether capital will be available to finance the electricity generating levels projected by the industry and by governments for the 1990s. The nuclear industry is now in trouble at every stage of the fuel cycle. The industry's difficulties have also revealed a lack of overall - but particularly nuclear - energy strategy at either national or international levels, and a lack of will to create regulations and institutional machinery at either of these levels which might reassure both concerned publics and the energy industries themselves. This paper appraises some of the present limitations of international institutions in achieving control and management of nuclear power.

  17. Nuclear power proliferation: problems of international control

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, B

    1977-09-01

    Some of the present limitations of international institutions in achieving control and management of nuclear power are reviewed and appraised. The nuclear industry is experiencing a multiple crisis in which economic, technical, and ethical aspects are blended. Nuclear hardware costs have increased faster than inflation in the last five years, largely as a result of delays in program completion arising from reactor and fuel-cycle safety problems. Meanwhile, there is a widespread and growing doubt, partly as a result of this cost escalation, as to whether capital will be available to finance the electricity-generating levels projected by the industry and by governments for the 1990s. The nuclear industry is now in trouble at every stage of the fuel cycle. The industry's difficulties have also revealed a lack of overall--but particularly nuclear--energy strategy at either national or international levels, and a lack of will to create regulations and institutional machinery at either of these levels that could reassure the concerned public and the energy industries.

  18. The protection of the accused in international criminal law according to the Human Rights Law Standard

    Directory of Open Access Journals (Sweden)

    Karolina Kremens

    2011-12-01

    Full Text Available The presented paper discusses the influence of international human rights law on international criminal law. It tries to give an answer to the question of whether rules protecting the accused in international criminal proceedings meet the human rights law standard provided by international declarations and covenants. Meaning, if the proceedings before the International Criminal Tribunal for Former Yugoslavia (ICTY, International Criminal Tribunal for Rwanda (ICTR and International Criminal Court (ICC meet the standard provided by international human rights law, in particular the International Covenant on Civil and Political Rights. The paper proves that international human rights law has affected international criminal law tremendously. Moreover, it is argued that the protection of the accused in the law of the international courts and tribunals with regard to his rights has improved when compared to the international human rights law standard. In particular the Rome Statute of the ICC provides the accused with the most comprehensive protection. This is especially visible in the case of such rights as the presumption of innocence, right to an interpreter and right to remain silent. Nevertheless, some shortcomings in the law of the ad hoc tribunals and ICC can be observed, in particular when it comes to identifying the commencement of protection of the accused.

  19. 48 CFR 719.273-10 - Internal controls.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Internal controls. 719.273...égé Program 719.273-10 Internal controls. (a) OSDBU will oversee the Program and will work in... objectives. OSDBU will establish internal controls as checks and balances applicable to the Program. These...

  20. 12 CFR 1731.5 - Internal controls, procedures, and training.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Internal controls, procedures, and training... HOUSING AND URBAN DEVELOPMENT SAFETY AND SOUNDNESS MORTGAGE FRAUD REPORTING § 1731.5 Internal controls, procedures, and training. An Enterprise shall establish adequate and efficient internal controls and...

  1. 49 CFR 192.475 - Internal corrosion control: General.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Internal corrosion control: General. 192.475... Control § 192.475 Internal corrosion control: General. (a) Corrosive gas may not be transported by... taken to minimize internal corrosion. (b) Whenever any pipe is removed from a pipeline for any reason...

  2. 15 CFR 752.11 - Internal Control Programs.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Internal Control Programs. 752.11... COMPREHENSIVE LICENSE § 752.11 Internal Control Programs. (a) Scope—(1) Introduction. It is through Internal Control Programs (ICPs) that the SCL holder and the consignee assure that exports and reexports are not...

  3. The upstream oil and gas industry's initiative in the development of international standards

    International Nuclear Information System (INIS)

    Thomas, G.A.N.; Thorp, G.

    1993-01-01

    The paper describes the international work of the oil industry to formalize as International Standards many of the industry standards used world-wide. It also describes how matters have been developing in Europe. E and P Forum, representing the international exploration and production oil and gas industry, provides a forum for coordinating industry standardization, to ensure that the necessary standards are maintained by the appropriate technical body. The paper discusses the development of the standardization program in ISO/TC67, the Technical Committee directing the transformation of some 70 API Standards into ISO Standards and the relationship to CEN (the European standardization body). The objective of the upstream industry is to operate worldwide to consistent international standards. Company standards can then concentrate on functional and performance requirements. This will facilitate international trade and communication, open competition and the global market. For a practical realization of this objective the oil industry must foster a special relationship between the relevant US bodies, ISO and CEN. The sustained support of all sides of industry is required

  4. Recently aspects regarding International Auditing Standard 200 „Overall Objectives of the Independent Auditor and the Conduct of an Audit in Accordance with International Standards on Auditing”

    Directory of Open Access Journals (Sweden)

    Daniel Botez

    2009-12-01

    Full Text Available The purpose of an audit is to enhance the degree of confidence of intended users in the financial statements. This is achieved by the expression of an opinion by the auditor on whether the financial statements are prepared, in all material respects, in accordance with an applicable financial reporting framework. The International Standard on Auditing 200 (ISA 200 deals with the independent auditor’s overall responsibilities when conducting an audit of financial statements in accordance with International Standards on Auditing (ISAs.

  5. Conservation and human rights: the need for international standards

    Energy Technology Data Exchange (ETDEWEB)

    Oviedo, Gonzalo [International Union for the Conservation of Nature (International organizations without location); Pabon, Luis [The Nature Conservancy (United States); Painter, Michael; Redford, Kent [The Wildlife Conservation Society (United States); Siegele, Linda [Foundation for International Environmental Law and Development (United Kingdom); Springer, Jenny [WWF-US (United States); Thomas, David [Birdlife International (International organizations without location); Painemilla, Kristen Walker [Conservation International (United States); Roe, Dilys

    2010-05-15

    Conservation doesn't happen in a vacuum. In recent years, awareness has grown of the relationship of international conservation practice to indigenous peoples and local communities, and especially the links between conservation and human rights. The impacts protected areas can have on rural communities – such as evictions and lost access to natural resources – are now under particular scrutiny. Concern is meanwhile rising over the human rights implications of some climate change mitigation and adaptation measures. But awareness is also growing of the positive contributions of nature conservation to the rights of people to secure their livelihoods, enjoy healthy and productive environments, and live with dignity. International NGOs can play a central role in supporting and promoting conservation actions that respect the rights of indigenous peoples and local communities, and help sustain their livelihoods. Many conservation organisations have long worked towards this. It is vital that they hold to consistent principles and implement measures that ensure their application, so their action on conservation remains accountable, transparent and sustainable.

  6. Archival-grade optical disc design and international standards

    Science.gov (United States)

    Fujii, Toru; Kojyo, Shinichi; Endo, Akihisa; Kodaira, Takuo; Mori, Fumi; Shimizu, Atsuo

    2015-09-01

    Optical discs currently on the market exhibit large variations in life span among discs, making them unsuitable for certain business applications. To assess and potentially mitigate this problem, we performed accelerated degradation testing under standard ISO conditions, determined the probable disc failure mechanisms, and identified the essential criteria necessary for a stable disc composition. With these criteria as necessary conditions, we analyzed the physical and chemical changes that occur in the disc components, on the basis of which we determined technological measures to reduce these degradation processes. By applying these measures to disc fabrication, we were able to develop highly stable optical discs.

  7. Experience from implementing international standards in national emergency response planning national adjustments and suggestions for improvements

    International Nuclear Information System (INIS)

    Naadland Holo, E.

    2003-01-01

    Full text: A process has been going on for some time in Norway to establish a harmonized background for emergency response planning for any kind of nuclear or radiological accident. The national emergency preparedness organisation with the crisis committee for nuclear accident, consisting of representatives from civil defence, defence, police-, health-, and food control authorities, has the authority to implement countermeasures to protect health, environment and national interests in case of an accident or in case of nuclear terrorism. However, in an early phase, the response plans need to be fully harmonized to ensure that every operational level knows their responsibility and the responsibilities of others. Our intention is to implement the IAEA standard 'preparedness and response for a nuclear or radiological emergency'. We believe this will simplify national and international communication and also simplify the crisis management if an accident occurs. In revising the national plans, and also the planning basis at regional and local level, as well as the planning basis for response to accidents at national nuclear facilities and in connection with arrival of nuclear submarines in Norwegian harbours, we have seen the need to make national adjustments to the international standards. In addition to the standard, there exist several other processes and routines for reporting different kinds of incidents. We have seen a need to coordinate this internally at the competent authority to simplify the routines. This paper will focus on the challenges we have met, our national solutions and some suggestions for simplification. National adjustments to the international standard. - Firstly, the threat categorization needs to be adjusted. First of all, we do not have nuclear power plants in Norway. In the aftermath of 11 September 2001 we also have focused more an the potential for nuclear terrorism. Nuclear terrorism is unlikely but puts up some new requirements in the

  8. Knowledge Acquisition and Memory Effects Involving an Expert System Designed as a Learning Tool for Internal Control Assessment

    Science.gov (United States)

    Lenard, Mary Jane

    2003-01-01

    The assessment of internal control is a consideration in all financial statement audits, as stressed by the Statement on Auditing Standards (SAS) No. 78. According to this statement, "the auditor should obtain an understanding of internal control sufficient to plan the audit" (Accounting Standards Board, 1995, p. 1). Therefore, an…

  9. Evaluation of medical record quality and communication skills among pediatric interns after standardized parent training history-taking in China.

    Science.gov (United States)

    Yu, Mu Xue; Jiang, Xiao Yun; Li, Yi Juan; Shen, Zhen Yu; Zhuang, Si Qi; Gu, Yu Fen

    2018-02-01

    The effect of using standardized parent training history-taking on the quality of medical records and communication skills among pediatric interns was determined. Fifth-year interns who were undertaking a pediatric clinical practice rotation were randomized to intervention and control groups. All of the pediatric interns received history-taking training by lecture and bedside teaching. The pediatric interns in the intervention group also received standardized parent history-taking training. The following two outcome measures were used: the scores of medical records, which were written by the pediatric interns after history-taking from real parents of pediatric patients; and the communication assessment tool (CAT) assessed by real parents. The general information, history of present illness (HPI), past medical history, personal history, family history, diagnosis, diagnostic analysis, and differential diagnosis scores in the intervention group were significantly higher than the control group (p history-taking is effective in improving the quality of medical records by pediatric interns. Standardized parent training history-taking is a superior teaching tool for clinical reasoning ability, as well as communication skills in clinical pediatric practice.

  10. The developments of international hydrogen and fuel cell technology standards and the response strategies in Taiwan

    International Nuclear Information System (INIS)

    Tso, C.

    2009-01-01

    The application of hydrogen and fuel cells has expanded as the technology in international markets has improved. Leading countries have focused on establishing hydrogen and fuel cell technology standards. Both the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) continuously release new hydrogen and fuel cell related standards. Although the government of Taiwan is promoting the development of a hydrogen and fuel cell industry, it may delay the commercialized schedule if there are no hydrogen and fuel cell related standards and regulations in place. Standards and regulations must be established as quickly as possible in order to accelerate the progress of the hydrogen and fuel cell industry. This presentation reviewed the international progress in hydrogen and fuel cell development and explained Taiwan's response strategies regarding the adoption of hydrogen and fuel cell products in niche Taiwanese markets

  11. Experience with nuclear safety standards development in non-governmental international organizations

    International Nuclear Information System (INIS)

    Becker, K.

    1985-01-01

    Besides the IAEA as a 'governmental' organization dealing with basic safety recommendations addressed primarily to the national regulatory bodies in developing countries, two closely related non-governmental international standards organizations have gained extensive experience in the field of nuclear standardization. Over more than 25 years since their formation, both (a) the International Organization for Standardization's (ISO) Technical Committee 85 'Nuclear Energy', in particular in its Sub-Committee 3 'Reactor Technology and Safety' and (b) the International Electrotechnical Commission's (IEC) Technical Committee 45 'Nuclear Instrumentation' have published numerous standards. A brief review is given of these, draft standards, and other documents planned to become international standards. Many of them deal with rather specialized topics typical for 'industrial' standards such as standardized procedures, instruments, methods, materials, test methods, terminology, and signs and symbols, but others are directly related to more basic safety issues. In some areas such as quality assurance, seismic aspects of siting and terminology, there has been in the past occasional overlap in the activities of the NUSS programme, IEC and ISO. Letters of Understanding have since 1981 contributed to clarifying the borderlines and to avoiding redundant efforts. Also, some experiences and problems are described arising, for example, from the harmonization of different national safety philosophies and traditions into universally accepted international standards, and the transfer of international standards into national standards systems. Finally, based on a recent comprehensive compilation of some 3300 nuclear standards and standards projects, an attempt is made to present a cost/benefit analysis and an outlook on future developments. (author)

  12. Transmission control unit drive based on the AUTOSAR standard

    Science.gov (United States)

    Guo, Xiucai; Qin, Zhen

    2018-03-01

    It is a trend of automotive electronics industry in the future that automotive electronics embedded system development based on the AUTOSAR standard. AUTOSAR automotive architecture standard has proposed the transmission control unit (TCU) development architecture and designed its interfaces and configurations in detail. This essay has discussed that how to drive the TCU based on AUTOSAR standard architecture. The results show that driving the TCU with the AUTOSAR system improves reliability and shortens development cycles.

  13. 78 FR 50259 - Derivatives Clearing Organizations and International Standards

    Science.gov (United States)

    2013-08-16

    ... managerial resources, as determined by the Commission, to discharge each responsibility of the [DCO].'' \\27... wide range of potential stress scenarios, which include, but are not limited to, the default of the... clearing members through margin requirements and other risk control mechanisms, to ensure that the DCO's...

  14. 77 FR 36984 - International Standard-Setting Activities

    Science.gov (United States)

    2012-06-20

    .../FDA. U.S. Participation: Yes. Cocoa Products and Chocolate Responsible Agency: HHS/FDA. U.S... (cattle liver) at Step 5/8. Proposed draft Sampling Plans for Residue Control for Aquatic Animal Products and Derived Edible Products of Aquatic Origin at Step 5/8. [[Page 36987

  15. LIMITS IN APPLICATION OF INTERNATIONAL STANDARDS TO INNOVATIVE CERAMIC SOLUTIONS

    Directory of Open Access Journals (Sweden)

    Cristiano Fragassa

    2015-06-01

    Full Text Available Gres Porcelain stoneware is a ceramic with a compact, hard, coloured and non-porous body. It is largely used as building materials, for a quality architecture, offering high resistance to impact, stress, wear, scratching, frost, chemical attach and stains. It is produced in flat tiles, billions of tons per year. A very prominent technology, based on a pyroclastic deformation, permits to obtain bended porcelain tiles as innovative solutions for a modern architecture. This technology is grounded on a proper combination of heavy machining by cutting tools and secondary firing in a kiln. This new element, the bended tile, can be used in several innovative applications (as steps, shelves, benches, radiators.... But, new functions require a better and in-depth knowledge of these materials, especially referring to the mechanical proprieties. This paper investigates the limits of applicability of ISO standards for the quality classification of ceramics and experimental measures of their mechanical proprieties.

  16. Building physics from physical principles to international standards

    CERN Document Server

    Pinterić, Marko

    2017-01-01

    This textbook provides thorough coverage of the most important building physics phenomena: heat transfer, moisture, sound/acoustics, and illumination. Since the book is primarily aimed at engineers, it addresses professional issues with due pragmatism, and by including many practical examples and related ISO standards. Nevertheless, in order to guarantee full comprehension, it also explains the underlying physical principles and relates them to practical aspects in a simple and clear way. This is achieved with the aid of more than 100 figures and consistent cross-referencing of formulas and ideas. In addition, interrelationships between the different building physics phenomena are elucidated in a way that will enable readers to develop performance specifications that inform the design process. The book will primarily appeal to students of civil engineering and architecture, as well as to all practitioners in these areas who wish to broaden their fundamental understanding of topics in building physics.

  17. International pollution control: Cooperative versus noncooperative strategies

    International Nuclear Information System (INIS)

    Dockner, E.J.; Van Long, N.

    1993-01-01

    International pollution control involving two neighboring countries is modeled as a simple two-player dynamic game. Each country produces a good that is consumed by domestic households. Production of each consumption good results in emissions of pollutants. Households in each country derive utility from the consumption of the domestically produced good but incur costs through the total stock of pollution (stock externality). In this setting we characterize cooperative as well as noncooperative pollution control strategies of the governments of the two countries that maximize the discounted stream of net benefits of a representative consumer. It turns out that when the governments are restricted to use linear strategies noncooperative behavior results in overall losses for both countries. If, on the contrary, governments use nonlinear Markov-perfect strategies and the discount rate is small enough a Pareto-efficient steady-state pollution stock can be supported as a differentiable subgame-perfect equilibrium. Thus, the emergence of first-best solutions (cooperative outcomes) does not require any institutional arrangements (threats, retaliation, etc.) but can be brought about through the use of nonlinear Markov-perfect equilibrium strategies. 20 refs., 1 tab

  18. Persian Agricultural Journals and Standard: Degree of Compatibility of Persian Scientific Agricultural Journals with International Standard Organization (ISO Publishing standards

    Directory of Open Access Journals (Sweden)

    Abbas Gilvari

    2011-10-01

    Full Text Available Standard is a collection of recipes, guidelines or recommendations which use in production, creating or making of goods, products, documents or special resources. Extent of adaptation of Persian Agricultural scientific journals which are publishing in Iran with ISO publishing standards was evaluated in this research. The information items which were necessary to be presented in different sections of Agricultural scientific journals were examined. Items which were needed to be present in cover page, content, title page, running title, and endnote, abstract, first page of an article, references and its structure were among the information items. 47 Agricultural scientific journals were publishing until February 2009 consisted of the research population. Descriptive survey method is used. Results showed the adaption rate with ISO standards in research population was 53.47 percent. There was no private publisher which publishes agricultural scientific journals. The extent of adaptation with ISO standards was high in journal sections such as abstracts and keywords.

  19. Quality control with R an ISO standards approach

    CERN Document Server

    Cano, Emilio L; Prieto Corcoba, Mariano

    2015-01-01

    Presenting a practitioner's guide to capabilities and best practices of quality control systems using the R programming language, this volume emphasizes accessibility and ease-of-use through detailed explanations of R code as well as standard statistical methodologies. In the interest of reaching the widest possible audience of quality-control professionals and statisticians, examples throughout are structured to simplify complex equations and data structures, and to demonstrate their applications to quality control processes, such as ISO standards. The volume balances its treatment of key aspects of quality control, statistics, and programming in R, making the text accessible to beginners and expert quality control professionals alike. Several appendices serve as useful references for ISO standards and common tasks performed while applying quality control with R.

  20. Improvement of internal book-keeping control at company "Balttranslaine"

    OpenAIRE

    Kolodinska, Aļona

    2012-01-01

    Master's thesis "Internal Accounting Control Improvement in Ltd."Balttranslaine"" is designed to determine the potential and directions for improving accounting controls Ltd. "Balttranslaine". The paper assesses Ltd. "Balttranslaine" internal accounting control system and develops proposals for its improvement, based on research on accounting control nature and its place in the overall company's internal control system, as well as the Latvian laws and regulations for construction and maint...

  1. Role of the IAEA in establishment of the international standards of radiation protection

    International Nuclear Information System (INIS)

    Pinak, M.

    2014-01-01

    The aim of the presentation is to highlight the existing challenges in radiation protection, and provide insight into the role of the IAEA in establishment of the radiation safety standards. It will, inter alia, cover from the following areas: 1. global outreach of safety principles in radiation protection and safety; 2. IAEA and establishment of Safety Standards; 3. IAEA Standards and national regulations; 4. IAEA members states role in drafting and review of IAEA Safety Standards; 5. existing, novel issues and challenges. The role of the IAEA is to establish fundamental safety objectives in radiation protection and safety following fundamental safety objectives, safety principles and concepts. The main aim of Safety Standards is to provide for the establishment of a system for protection of people and the environment from harmful effects of ionizing radiation. The requirements as included in the Safety Standards aim to assess, manage and control exposure to radiation so that radiation risks, including risks of health effects and risks to the environment, are reduced to the extent reasonably achievable.One of the novel feature adopted in the revised Basic Safety Standards (BSS) is the classification of exposures - planned, emergency and existing - each of them including several categories of exposure (occupational, public and medical), where appropriate.The revised BSS also addresses areas like exemption and clearance being particularly important in international trade and transport; significantly increases the number of requirements in medicine, in response to novel and/or expanding techniques in medicine using ionizing radiation; incorporates new regulatory limits for exposure to radon, and in protection of the lens of the eyes, as recommended by WHO and ICRP; newly introduces requirements for specific practices like, for example, airport security screenings; and addresses many other areas.While the principal approach to regulatory aspects in emergency exposure

  2. Development of proliferation resistance assessment methodology based on international standard

    International Nuclear Information System (INIS)

    Ko, W. I.; Chang, H. L.; Lee, Y. D.; Lee, J. W.; Park, J. H.; Kim, Y. I.; Ryu, J. S.; Ko, H. S.; Lee, K. W.

    2012-04-01

    Nonproliferation is one of the main requirements to be satisfied by the advanced future nuclear energy systems that have been developed in the Generation IV and INPRO studies. The methodologies to evaluate proliferation resistance has been developed since 1980s, however, the systematic evaluation approach has begun from around 2000. Domestically a study to develop national method to evaluate proliferation resistance (PR) of advanced future nuclear energy systems has started in 2007 as one of the long-term nuclear R and D subjects in order to promote export and international credibility and transparency of national nuclear energy systems and nuclear fuel cycle technology development program. In the first phase (2007-2010) development and improvement of intrinsic evaluation parameters for the evaluation of proliferation resistance, quantification of evaluation parameters, development of evaluation models, and development of permissible ranges of evaluation parameters have been carried out. In the second phase (2010-2012) generic principle of to evaluate PR was established, and techincal guidelines, nuclear material diversion pathway analysis method, and a method to integrate evaluation parameters have been developed. which were applied to 5 alternative nuclear fuel cycles to estimate their appicability and objectivity. In addition, measures to enhance PR of advanced future nuclear energy systems and technical guidelines of PR assessment using intrinsic PR evaluation parameters were developed. Lastly, requlatory requirements to secure nonproliferation requirements of nuclear energy systems from the early design stage, operation and to decommissioning which will support the export of newly developed advanced future nuclear energy system

  3. ISO 639-1 and ISO 639-2: International Standards for Language Codes. ISO 15924: International Standard for Names of Scripts.

    Science.gov (United States)

    Byrum, John D.

    This paper describes two international standards for the representation of the names of languages. The first (ISO 639-1), published in 1988, provides two-letter codes for 136 languages and was produced primarily to meet terminological needs. The second (ISO 639-2) appeared in late 1998 and includes three-letter codes for 460 languages. This list…

  4. (No) Limits to Anglo-American Accounting? Reconstructing the History of the International Accounting Standards Committee ; A Review Article

    OpenAIRE

    Botzem, S.; Quack, S.

    2009-01-01

    The development of the current International Accounting Standards Board (IASB) from the earlier International Accounting Standards Committee (IASC) provides insight into many issues of international financial reporting, among them the characteristics of international accounting standards themselves. This article reviews Camfferman and Zeff’s [Camfferman, K., & Zeff, S. A. (2007). Financial reporting and global capital markets. A history of the international accounting standards committee 1973...

  5. [From manual workshop to international standard maker: exploration on production standard of acupuncture needle by Chengjiang acupuncture school].

    Science.gov (United States)

    Cheng, Jie; Cao, Yang; Xia, Youbing

    2015-02-01

    ABSTRACT The exploration course on production standard of acupuncture needle by Chengjiang acupuncture school is reviewed in this paper. After new China was established, acupuncture needle standard was unified by Mr. CHENG Dan-an, which guided Suzhou Hua Erfang (predecessor of Suzhou Medical Supplies Factory) to make the quality standards and testing methods of acupuncture needle and improved the production process to make the modern acupuncture needle. Based on this, Suzhou Medical Supplies Factory followed the time development pace, ac tively introduced new technology, carried out technological innovation, and constantly improved the level of production technology, as a result, it gradually developed into one of the world's largest acupuncture needle production suppliers. Meanwhile, after establishing China's first national standard on acupuncture needle (GB 2024-1980), the Suzhou Medical Supplies Factory took the lead to draft "ISO) 17218:2014 the disposable use asepsis acupuncture needle", which was officially published as an international standard. The Suzhou Medical Supplies Factory developed from a manual workshop to an international standard maker.

  6. The International Accounting Standards Board’s Progress in Promoting Judgement Through Objectives-Oriented Accounting Standards

    Directory of Open Access Journals (Sweden)

    Tanja Lakovic

    2013-07-01

    Full Text Available This study analyzes how the International Accounting Standards Board (IASB promotes professional judgement by issuing objectives-oriented accounting standards and exposure drafts.  We focus on the the role of judgement as outlined in Phase I of the IASB Conceptual Framework (CF, Chapter 1, “Objective of General Purpose Financial Statements” and Chapter 3, “Qualitative Characteristics of Useful Financial Information” (IASB 2010. We discuss how the framework, when viewed through the prism of 'objectives-oriented accounting standards' as recommended by the United States Securities and Exchange Commission (SEC Report in its “Study Pursuant to Section 108(d of the Sarbanes-Oxley Act of 2002 on the Adoption by the United States Financial Reporting System of a Principles-Based Accounting System” (July 2003, encourages professional judgement. We analyze International Financial Reporting Standards (IFRS and Exposure Drafts (ED issued by the IASB since its inception in 2002 to determine if those documents are consistent with objectives-oriented accounting standards. Our analysis is useful for gaining insights into how the IASB integrates the CF with the SEC’s recommended objectives-oriented accounting approach to promote judgement in the interest of IASB/FASB convergence of accounting standards.

  7. The internal consistency of the standard gamble: tests after adjusting for prospect theory.

    Science.gov (United States)

    Oliver, Adam

    2003-07-01

    This article reports a study that tests whether the internal consistency of the standard gamble can be improved upon by incorporating loss weighting and probability transformation parameters in the standard gamble valuation procedure. Five alternatives to the standard EU formulation are considered: (1) probability transformation within an EU framework; and, within a prospect theory framework, (2) loss weighting and full probability transformation, (3) no loss weighting and full probability transformation, (4) loss weighting and no probability transformation, and (5) loss weighting and partial probability transformation. Of the five alternatives, only the prospect theory formulation with loss weighting and no probability transformation offers an improvement in internal consistency over the standard EU valuation procedure.

  8. Existing and future international standards for the safety of radioactive waste disposal

    International Nuclear Information System (INIS)

    Linsley, G.

    1999-01-01

    In this paper the essential features of the current international safety standards are summarised and the issues being raised for inclusion in future standards are discussed. The safety standards of the IAEA are used as the basis for the review and discussion. The IAEA has established a process for establishing international standards of safety for radioactive waste management through its Radioactive Waste Safety Standards (RADWASS) programme. The RADWASS documents are approved by a comprehensive process involving regulatory and other experts from all concerned IAEA Member States. A system of committees for approving the IAEAs safety standards has been established. For radioactive waste safety the committee for review and approval is the Waste Safety Standards Advisory Committee (WASSAC). In 1995 the IAEA published 'The Principles of Radioactive Waste Management' as the top level document in the RADWASS programme. The report sets out the basis principles which most experts believe are fundamental to the safe management of radioactive wastes

  9. International standards for optical wireless communications: state-of-the-art and future directions

    Science.gov (United States)

    Marciniak, Marian

    2017-10-01

    As the number of active OWC installations is growing fast, the standards for compatibility of co-existing neighbouring systems are being developed. The paper addresses the Laser Safety (IEC standards), ITU-T Study Group 15 standards (G.640 Co-location longitudinally compatible interfaces for free space optical systems), ITU-Radiocommunication Sector standards (P.1817-1 Propagation data required for the design of terrestrial free-space optical links), and the IEEE Work in Progress - standardization activity on Visible Light Communications. International standards of FSO communications have been reviewed and discussed. ITU, IEC, and IEEE International standards for Free-Space Optical links have been reviewed. The system reliability and availability as well as security issues will be addressed as well in the talk.

  10. International Standards to Develop and Promote Energy Efficiency and Renewable Energy Sources

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    International Standards are a powerful tool for disseminating new technologies and good practices, developing global markets and supporting the harmonization of government policies on energy efficiency and renewable sources on a global scale.

  11. Internal control in non - agricultural cooperatives

    Directory of Open Access Journals (Sweden)

    Yolanda García Castro

    2014-12-01

    Full Text Available The process of formation of non-agricultural cooperatives in Cuba, has been a step forward for the Cuban economy, provide primary care represents economic sustainability for the country. A necessary tool for achieving quality in the provision of services and products, it represents the audit process. In this sense the present work was aimed in the Council of the Provincial Administration, in order to strengthen the functioning of non-agricultural cooperatives. Theoretical and empirical methods, techniques, surveys and interviews with leaders and workers, aimed to assess the knowledge, applications for the creation of cooperatives, processing, approval, establishment and operation, based on guidelines established in internal control were applied; and descriptive statistics for processing information, which identified the important work that developed the organization, which was able to promote the operation of non-agricultural cooperatives, as well as the tools necessary for the production of income and consequently improve the quality of services. The diagnosis made it possible to identify the point in the process, so disruption to the operation. Undoubtedly, every experiment needs time to mature and gain experience, besides confirming Waste Disposal workers cooperatives and agencies to jump-start this process. Improvement measures were implemented in order to increase the economic efficiency of each process, in response to various guidelines of Economic and Social Policy of the Party and the Revolution, adopted at the Sixth Party Congress and Conference Objectives.

  12. METHODOLOGICAL ASPECTS OF CONTENT ANALYSIS OF CONVERGENCE BETWEEN UKRAINIAN GAAP AND INTERNATIONAL FINANCIAL REPORTING STANDARDS

    Directory of Open Access Journals (Sweden)

    R. Kuzina

    2015-06-01

    Full Text Available The objective conditions of Ukraine’s integration into the global business environment the need to strengthen the accounting and financial re-porting. At the stage of attracting investment in the country there is a need in the preparation of financial statements generally accepted basic prin-ciples of which are based on common international financial reporting standards (IFRS . Relevant is the assessment of convergence of national standards and International Financial Reporting Standards. However, before you conduct content analysis necessary to determine compliance with standards of methodological approaches to the selection of key indicators for the assessment of convergence. The article is to define the methodo-logical approaches to the selection and development of indicators IFRSs list of key elements for further evaluation convergence of national and international standards. To assess the convergence was allocated 187 basic key elements measuring the level of convergence to IFRS. Sampling was carried out based on the professional judgment of the author, the key indicators of the standard, based on the evaluation of the usefulness of accounting information. These figures make it possible to calculate the specific level of convergence of international and national standards and determine how statements prepared by domestic standards corresponding to IFRS. In other words, can with some certainty assert that Ukraine has made (“good practices in IFRS implementation” or not? This calculation will assess the regulatory efforts of government agencies (Ministry of Finance on the approximation of Ukrainian standards and IFRS.

  13. Photon and proton activation analysis of iron and steel standards using the internal standard method coupled with the standard addition method

    International Nuclear Information System (INIS)

    Masumoto, K.; Hara, M.; Hasegawa, D.; Iino, E.; Yagi, M.

    1997-01-01

    The internal standard method coupled with the standard addition method has been applied to photon activation analysis and proton activation analysis of minor elements and trace impurities in various types of iron and steel samples issued by the Iron and Steel Institute of Japan (ISIJ). Samples and standard addition samples were once dissolved to mix homogeneously, an internal standard and elements to be determined and solidified as a silica-gel to make a similar matrix composition and geometry. Cerium and yttrium were used as an internal standard in photon and proton activation, respectively. In photon activation, 20 MeV electron beam was used for bremsstrahlung irradiation to reduce matrix activity and nuclear interference reactions, and the results were compared with those of 30 MeV irradiation. In proton activation, iron was removed by the MIBK extraction method after dissolving samples to reduce the radioactivity of 56 Co from iron via 56 Fe(p, n) 56 Co reaction. The results of proton and photon activation analysis were in good agreement with the standard values of ISIJ. (author)

  14. International Standards: Past Free Trade Agreements and the Prospects in the Transatlantic Trade and Investment Partnership

    Directory of Open Access Journals (Sweden)

    Eliasson Leif Johan

    2015-02-01

    Full Text Available The Transatlantic Trade and Investment Partnership represents a strategic vision of transatlantic relations, including job creation, global leadership, and establishing high international standards. This paper discusses how three recent bi-lateral and regional agreements, along with positions adopted in transatlantic negotiations, convey respective side's acceptable parameters, and how international standards are emerging from and disseminated through agreements involving the European Union and the United States

  15. Selecting International Standards for Accrual-Based Accounting in the Public Sector

    DEFF Research Database (Denmark)

    Pontoppidan, Caroline Aggestam

    2011-01-01

    The article discusses the definition of a government business enterprise (GBE), as provided in the International Public Sector Accounting Standards (IPSAS), as a determinant for applying IPSAS or the International Financial Reporting Standards (IFRS) for a public sector entity. The work...... of the IPSASB is focused on the accounting and financial reporting needs of national, regional and local governments, and related governmental agencies, while the IFRS serves the private sector....

  16. Succeeding in process standardization: Explaining the fit with international management strategy

    DEFF Research Database (Denmark)

    Rahimi, Fatemeh; Møller, Charles; Hvam, Lars

    2016-01-01

    Purpose: The purpose of this paper is to explore the fit between process standardization and international management strategy of multinational corporations (MNCs) by assessing the compatibility between process standardization and corporate structural characteristics in terms of asset configuration...... and headquarters-subsidiary relationships. Design/methodology/approach: First, after a literature review on MNCs’ strategy and process standardization, the study suggests two propositions on the fit between corporate international management strategy and process standardization. Second, to empirically examine....../value: The study provides in-depth understanding of how the international management strategy and consequent structural characteristics of MNCs affects process standardization in the course of a global enterprise resource planning implementation. The study proposes conditions of fit for aligning process...

  17. International Cooperation to Establish Standard Operating Procedure (SOP) for Quarantine Management of Irradiated Foods in International Trade

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J. W.; Byun, M. W.; Kim, J. H.; Choi, J. I.; Song, B. S.; Yoon, Y. H.; Kim, D. H.; Kim, W. G.; Kim, K. P.

    2010-02-15

    {center_dot} Development of SOPs through various research activities such as building international cooperation, and analysing current status of food irradiation in domestic and international markets, export and import, international market size, and of R and D - Analysis of examples for quarantine management in agricultural product exporting countries and use of irradiation technology for agricultural product quarantine, and changes in international quarantine management - Analysis of SOPs for food irradiation quarantine in international organization (CODEX, IPPC, WHO). U.S, EU, China, India, and Australia. - Collaborative researches of India/Korea and China/Korea entered into an agreement for market trials {center_dot} Publishment of irradiation quarantine management SOPs agreed to CODEX standards - Collaborative researches for quarantine management, avoiding Technical Barrier to Trade (TBT), and Sanitary Phytosanitary Measures were conducted, and advanced SOPs agreed with WTO/FTA system were published

  18. International Cooperation to Establish Standard Operating Procedure (SOP) for Quarantine Management of Irradiated Foods in International Trade

    International Nuclear Information System (INIS)

    Lee, J. W.; Byun, M. W.; Kim, J. H.; Choi, J. I.; Song, B. S.; Yoon, Y. H.; Kim, D. H.; Kim, W. G.; Kim, K. P.

    2010-02-01

    · Development of SOPs through various research activities such as building international cooperation, and analysing current status of food irradiation in domestic and international markets, export and import, international market size, and of R and D - Analysis of examples for quarantine management in agricultural product exporting countries and use of irradiation technology for agricultural product quarantine, and changes in international quarantine management - Analysis of SOPs for food irradiation quarantine in international organization (CODEX, IPPC, WHO). U.S, EU, China, India, and Australia. - Collaborative researches of India/Korea and China/Korea entered into an agreement for market trials · Publishment of irradiation quarantine management SOPs agreed to CODEX standards - Collaborative researches for quarantine management, avoiding Technical Barrier to Trade (TBT), and Sanitary Phytosanitary Measures were conducted, and advanced SOPs agreed with WTO/FTA system were published

  19. Internal standardization in atomic-emission spectrometry using inductively coupled plasma

    International Nuclear Information System (INIS)

    Moore, G.L.

    1985-01-01

    The principle of internal standardization has been used in quantitative analytical emission spectroscopy since 1925 to minimize the errors arising from fluctuations in sample preparation, excitation-source conditions, and detection parameters. Although modern spectroscopic excitation sources are far more stable and electronic detection methods are more precise than before, the system for the introduction of the sample in spectrometric analysis using inductively coupled plasma (ICP) introduces significant errors, and internal standardization can still play a useful role in improving the overall precision of the analytical results. The criteria for the selection of the elements to be used as internal standards in arc and spark spectrographic analysis apply to a much lesser extent in ICP-spectrometric analysis. Internal standardization is recommended for use in routine ICP-simultaneous spectrometric analysis to improve its accuracy and precision and to provide a monitor for the reassurance of the analyst. However, the selection of an unsuitable reference element can result in misuse of the principle of internal standardization and, although internal standardization can be applied when a sequential monochromator is used, the main sources of error will not be minimized

  20. OECD International Standard Problem number 34. Falcon code comparison report

    International Nuclear Information System (INIS)

    Williams, D.A.

    1994-12-01

    ISP-34 is the first ISP to address fission product transport issues and has been strongly supported by a large number of different countries and organisations. The ISP is based on two experiments, FAL-ISP-1 and FAL-ISP-2, which were conducted in AEA's Falcon facility. Specific features of the experiments include quantification of chemical effects and aerosol behaviour. In particular, multi-component aerosol effects and vapour-aerosol interactions can all be investigated in the Falcon facility. Important parameters for participants to predict were the deposition profiles and composition, key chemical species and reactions, evolution of suspended material concentrations, and the effects of steam condensation onto aerosols and particle hygroscopicity. The results of the Falcon ISP support the belief that aerosol physics is generally well modelled in primary circuit codes, but the chemistry models in many of the codes need to be improved, since chemical speciation is one of the main factors which controls transport and deposition behaviour. The importance of chemical speciation, aerosol nucleation, and the role of multi-component aerosols in determining transport and deposition behaviour are evident. The role of re-vaporization in these Falcon experiments is not clear; it is not possible to compare those codes which predicted re-vaporization with quantitative data. The evidence from this ISP exercise indicates that the containment codes can predict thermal-hydraulics conditions satisfactorily. However, the differences in the predicted aerosol locations in the Falcon tests had shown that aerosol behaviour was very susceptible to parameters such as particle size distribution

  1. Relationship between internal medicine program board examination pass rates, accreditation standards, and program size.

    Science.gov (United States)

    Falcone, John L; Gonzalo, Jed D

    2014-01-19

    To determine Internal Medicine residency program compliance with the Accreditation Council for Graduate Medical Education 80% pass-rate standard and the correlation between residency program size and performance on the American Board of Internal Medicine Certifying Examination. Using a cross-sectional study design from 2010-2012 American Board of Internal Medicine Certifying Examination data of all Internal Medicine residency pro-grams, comparisons were made between program pass rates to the Accreditation Council for Graduate Medical Education pass-rate standard. To assess the correlation between program size and performance, a Spearman's rho was calculated. To evaluate program size and its relationship to the pass-rate standard, receiver operative characteristic curves were calculated. Of 372 Internal Medicine residency programs, 276 programs (74%) achieved a pass rate of =80%, surpassing the Accreditation Council for Graduate Medical Education minimum standard. A weak correlation was found between residency program size and pass rate for the three-year period (p=0.19, pInternal Medicine residency programs complied with Accreditation Council for Graduate Medical Education pass-rate standards, a quarter of the programs failed to meet this requirement. Program size is positively but weakly associated with American Board of Internal Medicine Certifying Examination performance, suggesting other unidentified variables significantly contribute to program performance.

  2. International Standards Development for Marine and Hydrokinetic Renewable Energy - Final Report on Technical Status

    Energy Technology Data Exchange (ETDEWEB)

    Rondorf, Neil E.; Busch, Jason; Kimball, Richard

    2011-10-29

    This report summarizes the progress toward development of International Standards for Marine and Hydrokinetic Renewable Energy, as funded by the U.S. Department of Energy (DOE) under the International Electrotechnical Commission (IEC) Technical Committee 114. The project has three main objectives: 1. Provide funding to support participation of key U.S. industry technical experts in 6 (originally 4) international working groups and/or project teams (the primary standards-making committees) and to attend technical meetings to ensure greater U.S. involvement in the development of these standards. 2. Provide a report to DOE and industry stakeholders summarizing the IEC standards development process for marine and hydrokinetic renewable energy, new international standards and their justifications, and provide standards guidance to industry members. 3. Provide a semi-annual (web-based) newsletter to the marine renewable energy community. The newsletter will educate industry members and stakeholders about the processes, progress, and needs of the US efforts to support the international standards development effort. The newsletter is available at www.TC114.us

  3. standards used for quality control of nuclear fuels

    International Nuclear Information System (INIS)

    Guereli, L; Can, S.

    1997-01-01

    Nuclear fuels and fuel materials are subject to stringent restrictions as to their quality. The standards and regulations that apply vary according to reactor type and country and the standards are stated in the quality assurance documents. The concept of quality assurance has altered the conventional quality control tests and procedures, defining which control tests are to be applied and how. Although most of the tests and measurements allow the determination of tolerances to be decided according to the agreement between the buyer and the seller, exacting procedures apply to which instruments and equipment are used for these tests and measurements, how these instruments are standardized.Detailed explanations of test methods and their documentation is a requirement in all standards. The purpose of this work is to study which standards, tests and measurements apply to the nuclear fuel production. Only the standards that apply to various stages of the nuclear fuel production (powder preparation, pellet production, fuel element and fuel assembly fabrication) are reviewed. Process and documentation control, design and licensing requirements and the frequency of inspections are quality assurance subjects. Some ASTM standards are given as examples

  4. Software database creature for investment property measurement according to international standards

    Science.gov (United States)

    Ponomareva, S. V.; Merzliakova, N. A.

    2018-05-01

    The article deals with investment property measurement and accounting problems at the international, national and enterprise levels. The need to create the software for investment property measurement according to International Accounting Standards was substantiated. The necessary software functions and the processes were described.

  5. Comparison report for CSNI International Standard Problem 12 (ROSA-III Run 912)

    International Nuclear Information System (INIS)

    Tasaka, Kanji; Anoda, Yoshinari; Kumamaru, Hiroshige; Nakamura, Hideo; Iriko, Masanori; Yonomoto, Taisuke; Shiba, Masayoshi

    1982-09-01

    ROSA-III Run 912 was identified as International Standard Problem 12 by the Committee on the Safety of Nuclear Installations. Run 912 simulated a 5% split break LOCA condition in a BWR at the pump suction in the recirculation line with the HPCS failure. Comparisons between the test data and the calculations by eight international participants were made and discussed. (author)

  6. Applying international standards and guidelines on corporate social responsibility: An action plan

    NARCIS (Netherlands)

    Cramer, J.M.

    2005-01-01

    How can a company start the process of corporate social responsibility in an international context, thereby makinge use of diverse standards and guidelines? This question immediately came to the fore emerged after the start of the programme ‘Corporate social responsibility in international context’

  7. International standards for the indoor environment. Where are we and do they apply to Asian countries?

    DEFF Research Database (Denmark)

    Olesen, Bjarne W.

    2003-01-01

    On the international level, ISO (International Organization for Standardization), CEN (European Committee for Standardization) and ASHRAE (American Society of Heating, Refrigerating and Air Conditioning Engineers) are writing and reviewing standards relating to the indoor environment on a regular...... basis. This presentation will focus on the development of standards for the indoor thermal environment and indoor air quality (ventilation). In the future, recommendations for acceptable indoor environments will be specified as classes. This allows for national differences in the requirements as well...... as for designing buildings for different quality levels. Several of these standards have been developed mainly by experts from Europe, North America and Japan. Are there, however, special considerations relating to South-East Asia (lifestyle, outdoor climate, economy) that are not dealt with in these standards...

  8. International Financial Reporting standard for Small and Medium-sized entities

    Directory of Open Access Journals (Sweden)

    Z Koppeschaar

    2012-12-01

    Full Text Available The International Financial Reporting Standard for Small and Medium-sized entities (IFRS for SMEs was published as a standard by the International Accounting Standards Board (IASB during July 2009. During 2007 South Africa became one of the first countries and the first country in Africa to early accept the proposed accounting standard (exposure draft of an IFRS for SMEs. The accounting standard will probably also be accepted by numerous other countries. The aim of this article is to investigate the applicability of this accounting standard. The results indicated that the IFRS for SMEs remains too comprehensive for the majority of small companies. The IFRS for SMEs does not satisfy the needs of South African users of small company financial statements, and as a result the accounting requirements should be simplified. KEYWORDS: Financial accounting; Financial reporting requirements; IFRS for SMEs; Small companies; Users of financial statements; Small company financial statements.

  9. Quality control methodology and implementation of X-radiation standards beams, mammography level, following the standard IEC 61267

    International Nuclear Information System (INIS)

    Correa, Eduardo de Lima

    2010-01-01

    In this work it was developed and applied a quality control program of the X radiation system (160 kV, constant potential, target of tungsten) of the Calibration Laboratory of IPEN(LCI) in the energy range relative to mammography beams (from 25 kV to 35 kV). The X radiation standards beams, level mammography, using molybdenum and aluminum as additional filtration, were established after the application of this quality control program following national and international recommendations. The reference ionization chamber has traceability to PTB and was regularly submitted to quality control tests for evaluation and analysis of its performance. The radiation qualities emerging from the X-radiation assembly (RQR-M), based on a phantom made up of an aluminum added filter (RQA-M), narrow beam condition (RQN-M) and broad beam condition (RQB-M), following the recommendations of the international standard IEC 61267 (2005) and the IAEA code of practice, TRS 457 (2007) were established. For the implantation of RQN-M and RQB-M radiation qualities, two mammography phantoms were developed. The half-value layers found are those presented by the German primary laboratory PTB, and varied from 0.35 to 1.21 mm Al. The air kerma rates were obtained for all the 15 implanted qualities. (author)

  10. A New International Standard for "Actions from Waves and Currents on Coastal Structures"

    DEFF Research Database (Denmark)

    Tørum, Alf; Burcharth, Hans F.; Goda, Yoshimi

    2007-01-01

    The International Organization for Standardization (ISO) is going to issue a new standard concerning "Actions from Waves and Currents on Coastal Structures," which becomes the first international standard in coastal engineering. It is composed of a normative part (29 pages), an informative part (80...... pages) and Bibliography ( 17 pages). The normative part describes what is considered as the norm of the matters in concern, while the informative part provides the information on recommended practice. The paper introduces the main points of the normative part and discusses the influence of the new...

  11. Development of international standards for instrumentation used for detection of illicit trafficking of radioactive material

    International Nuclear Information System (INIS)

    Voytchev, M.; Chiaro, P.; Radev, R.

    2006-01-01

    Subcommittee 45 B 'Radiation Protection Instrumentation' of the International Electrotechnical Commission (I.E.C.) is charged with the development of international standards for instrumentation used for monitoring of illicit trafficking of radioactive material through international boarders and territories, as well as inside countries. Currently three I.E.C. standards are in advanced stages of development. They are expected to be approved and published in 2006-2007. The international participation and the main characteristics of the following three standards are discussed and presented: I.E.C. 62327 'Hand-held Instruments for the Detection and Identification of Radionuclides and Additionally for the Indication of Ambient Dose Equivalent Rate from Photon Radiation', I.E.C. 62401 'Alarming Personal Radiation Devices for Detection of Illicit Trafficking of Radioactive Material' and I.E.C. 62244 'Installed Radiation Monitors for the Detection of Radioactive and Special Nuclear Materials at National Borders'

  12. Internal control in the management system of meat processing enterprises

    Directory of Open Access Journals (Sweden)

    Volodymyr Kushnir

    2018-03-01

    Full Text Available The article is described the theoretical basis of internal control and its practical aspects in the work of meat processing enterprises (a case in the meat processing industry in Ukraine. The purpose of the research is to establish the theoretical foundations of the internal control and its improvement in the activity of meat processing plants of various forms of management. It is proposed to use precisely internal control among other names of domestic control. Definition of internal control, its subject and purpose are improved. The subjects and objects of internal control are determined; the principles of its implementation are supplemented. Specific control tasks in meat processing plants according to the needs of this industry are outlined. Specific examples of control subjects are presented and the role of the revision commission is emphasized. The state of internal control in meat processing plants in Ukraine is investigated and it is established that it has a bad condition and unfounded approach to its implementation by managers of meat processing enterprises. To improve the situation we recommend that each meat processing enterprise have in its staff a revision commission or an apposer (auditor. It is established that internal control is more effective in joint-stock companies than in limited liability companies. The necessity of internal control as an important element in the enterprise management system is accented.

  13. Standards for the control of radioactive discharges to the environment a changing situation

    International Nuclear Information System (INIS)

    Robinson, C.; Cabiance, T.; Linsley, G.

    2004-01-01

    The International Atomic Energy Agency (IAEA) is the organization within the UN family with a statutory mandate to establish standards for the protection of health and property against ionizing radiation, and to provide for the application of those standards. As part of these functions, the IAEA periodically reviews the status and continued relevance of its standards to the needs of Member States. Recent work on the development of a framework for the protection of non-human species, and on practical guidance for setting discharge limits, has highlighted a number of issues that have a bearing on the further development and application of standards for the control of discharges of radionuclides to the environment. The status of IAEA work on the protection of non-human species and the main findings of the International Conference on Protection of the Environment from the Effects of Ionizing Radiation, held in Stockholm, Sweden in October 2003 are presented. As part of a parallel programme of work, in support of existing standards on the regulatory control of discharges, a review of relevant national experience has been undertaken. This suggests that societal pressures and regulatory practicalities have resulted in discharge controls that are often more restrictive that those that would be implied by formal optimization techniques. A number of factors taken into account in setting discharge limits are identified and the application of the optimization principle to discharge regulation is discussed. The possible form of future standards that address both these developments is explored. (Author) 28 refs

  14. International Narcotics Control Strategy Report, 1997

    National Research Council Canada - National Science Library

    1998-01-01

    .... Continued warfare, destmction of the economic infrastmcture and absence of a recognized central government with administrative control over the entire country remain obstacles to effective dmg control...

  15. Overview and comparative study of GPR international standards and guidelines - COST Action TU1208

    Science.gov (United States)

    Pajewski, Lara; Marciniak, Marian; Benedetto, Andrea; Tosti, Fabio

    2016-04-01

    for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar, ASTM International, West Conshohocken, PA, 2010, www.astm.org, DOI: 10.1520/D4748-10. Further ASTM standards exist, not focused on GPR but including useful information (details are not provided here, for brevity reasons). There are no standards in Europe, instead, guiding the GPR use for subsurface prospecting and regulating the numerous applications of this non-destructive technique. The following Radio and Telecommunications Terminal Equipment (R&TTE) directive applies to GPR equipment and allows the placing of a GPR product on the European (EU) market for sale: Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999, on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. Official Journal of the European Union, L 91, 7.4.1999, open access on ec.europa.eu. This document will be repealed, since 13 June 2016, by the following R&TTE directive: Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014, on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment, repealing Directive 1999/5/EC. Official Journal of the European Union, L 153, 22.5.2014, open access on ec.europa. Although conformance to the R&TTE directive allows the placing of a GPR product on the market for sale, it does not give authority for its use. In order to use the equipment, in the majority of EU member countries, a license is required. The license is controlled and issued by the radio administration in each of the member countries. The Electronic Communications Committee (ECC) of the European Conference of Postal and Telecommunications Administrations (CEPT) considers and develops policies on electronic communications activities in European context, taking account of European and international legislations and regulations. There are 48 European countries

  16. [Evaluation standards and application for photography of schistosomiasis control theme].

    Science.gov (United States)

    Chun-Li, Cao; Qing-Biao, Hong; Jing-Ping, Guo; Fang, Liu; Tian-Ping, Wang; Jian-Bin, Liu; Lin, Chen; Hao, Wang; You-Sheng, Liang; Jia-Gang, Guo

    2018-02-26

    To set up and apply the evaluation standards for photography of schistosomiasis control theme, so as to offer the scientific advice for enriching the health information carrier of schistosomiasis control. Through the literature review and expert consultation, the evaluation standard for photography of schistosomiasis control theme was formulated. The themes were divided into 4 projects, such as new construction, natural scenery, working scene, and control achievements. The evaluation criteria of the theme photography were divided into the theme (60%), photographic composition (15%), focus exposure (15%), and color saturation (10%) . A total of 495 pictures (sets) from 59 units with 77 authors were collected from schistosomiasis epidemic areas national wide. After the first-step screening and second-step evaluation, the prizes of 3 themes of control achievements and new construction, working scene, and natural scenery were selected, such as 6 pictures of first prize, 12 pictures of second prize, 18 pictures of third prize, and 20 pictures of honorable prize. The evaluation standards of theme photography should be taken into the consideration of the technical elements of photography and the work specification of schistosomiasis prevention and control. In order to improve the ability of records for propaganda purpose of schistosomiasis control and better play a role of guiding correct propaganda, the training and guidance of photography of professionals should be carried out.

  17. [International Standards of Tuberculosis Care (ISTC)--comments from the German point of view].

    Science.gov (United States)

    Castell, S; Bauer, T; Diel, R; Hedrich, A; Magdorf, K; Rüsch-Gerdes, S; Schaberg, T; Loddenkemper, R

    2012-04-01

    The "International Standards for Tuberculosis Care" (ISTC) were developed by the World Health Organisation (WHO) and others to provide internationally agreed and, if possible, evidence-based standards for tuberculosis care including the care by private providers who are not part of national tuberculosis programmes or health-care systems. Hence, the ISTC primarily address resource-restrained countries with high tuberculosis prevalence. In this article, the German translation of the 21 standards from 2009 is presented - addressing diagnostic and therapeutic standards, co-infection (especially with HIV) and public-health issues. The accompanying comments show how these standards have to be modified for Germany due to the medical resources available here and country-specific characteristics respectively. © Georg Thieme Verlag KG Stuttgart · New York.

  18. Adjustment of the Brazilian radioprotection standards to the safety principles of the International Atomic Energy Agency

    International Nuclear Information System (INIS)

    Pereira, Wagner de S.; Py Junior, Delcy de A.

    2013-01-01

    The International Atomic Energy Agency (IAEA) has a recommendation with 10 basic safety principles (Fundamental Safety Principles Safety Fundamentals series, number SF-1), which are: 1) Responsibility for safety; 2) Role for government; 3) Leadership and management for safety; 4) Justification of facilities and activities; 5) Optimization of protection; 6) Limitation of risk to individuals; 7) Protection of present and futures generations; 8) Prevention of accidents; 9) Emergency preparedness and response and 10) Protection actions to reduce existing or unregulated radiations risk. The aim of this study is to verify that the Brazilian standards of radiation protection meet the principles described above and how well suited to them. The analysis of the national radiation protection regulatory system, developed and deployed by the National Nuclear Energy Commission (CNEN), showed that out of the ten items, two are covered partially, the number 2 and 10. The others are fully met. The item 2 the fact that the regulatory body (CNEN) be stock controller of a large company in the sector put in check its independence as a regulatory body. In item 10 the Brazilian standard of radiation protection does not provide explicit resolution of environmental liabilities

  19. Round table discussion: Quality control and standardization of nuclear medicine software

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    In summary the round table came to the following important conclusions: Nuclear medicine software systems need better documentation, especially regarding details of algorithms and limitations, and user friendliness could be considerably improved. Quality control of software is an integral part of quality assurance in nuclear medicine and should be performed at all levels of the software. Quality control of applications software should preferably be performed with assistance of generally accepted software phantoms. A basic form of standardization was welcomed and partly regarded as essential by all participants. Some areas such as patient study files could be standardized in the near future, whereas other areas such as the standardization of clinical applications programs or acquisition protocols still present major difficulties. An international cooperation in the field of standardization of software and other topics has already been started on the European level and should be continued and supported. (orig.)

  20. The development of international standards for the protection of the environment from the effects of ionizing radiation

    International Nuclear Information System (INIS)

    Robinson, Carol

    2004-01-01

    There has been an increasing awareness over recent years of the need to develop an approach that specifically addresses the protection of non-human species from the effects of ionizing radiation, largely in response to national and international environmental legal instruments. The IAEA has a long history of involvement in assessing the impact of ionizing radiation on non-human species and has, in recent years, established a programme of work to address the development of safety standards on this issue, in co-operation with other relevant international organizations. This paper provides an overview of the status of international work in this regard, paying particular attention to the work of the IAEA, and the relevant task groups of the International Commission on Radiological Protection (ICRP). It includes a discussion of the ethics and principles of environmental protection, and issues related to the development of a practical framework for environmental assessment and decision-making. The future development of international safety standards for the control of releases of radionuclides to the environment will depend upon the findings and recommendations of the International Conference on Protection of the Environment from the Effects of Ionizing Radiation, held in Stockholm, Sweden, 6-10 October 2003. The main issues arising at that conference are summarised. (author)

  1. Instrumentation Standard Architectures for Future High Availability Control Systems

    International Nuclear Information System (INIS)

    Larsen, R.S.

    2005-01-01

    Architectures for next-generation modular instrumentation standards should aim to meet a requirement of High Availability, or robustness against system failure. This is particularly important for experiments both large and small mounted on production accelerators and light sources. New standards should be based on architectures that (1) are modular in both hardware and software for ease in repair and upgrade; (2) include inherent redundancy at internal module, module assembly and system levels; (3) include modern high speed serial inter-module communications with robust noise-immune protocols; and (4) include highly intelligent diagnostics and board-management subsystems that can predict impending failure and invoke evasive strategies. The simple design principles lead to fail-soft systems that can be applied to any type of electronics system, from modular instruments to large power supplies to pulsed power modulators to entire accelerator systems. The existing standards in use are briefly reviewed and compared against a new commercial standard which suggests a powerful model for future laboratory standard developments. The past successes of undertaking such projects through inter-laboratory engineering-physics collaborations will be briefly summarized

  2. Modelling and controlling infectious diseases | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The research team is exploring the potential of mathematical modelling to ... to China's health system and improvements to its medical research capacity. ... and on the scientific board of the Gates Foundation's Global Health program. ... He has published more than 400 research papers in national and international journals.

  3. Design and implementation of a standard framework for KSTAR control system

    International Nuclear Information System (INIS)

    Lee, Woongryol; Park, Mikyung; Lee, Taegu; Lee, Sangil; Yun, Sangwon; Park, Jinseop; Park, Kaprai

    2014-01-01

    Highlights: • We performed a standardized of control system in KSTAR. • EPICS based software framework is developed for the realization of various control systems. • The applicability of the framework is widened from a simple command dispatcher to the real time application. • Our framework supports the implementation of embedded IOC in FPGA board. - Abstract: Standardization of control system is an important issue in KSTAR which is organized with various heterogeneous systems. Diverse control systems in KSTAR have been adopting new application software since 2010. Development of this software was launched for easy implementation of a data acquisition system but it is extended to as a Standard Framework (SFW) of control system in KSTAR. It is composed with a single library, database, template, and descriptor files. The SFW based controller has common factors. It has non-blocking control command method with a thread. The internal sequence handler makes it can be synchronized with KSTAR experiment. It also has a ring buffer pool mechanism for streaming input data handling. Recently, there are two important functional improvements in the framework. Processor embedded FPGA was proposed as a standard hardware platform for specific application. These are also manipulated by the SFW based embedded application. This approach gives single board system an ability of low level distributed control under the EPICS environments. We also developed a real time monitoring system as a real time network inspection tool in 2012 campaign using the SFW

  4. METHODOLOGICAL ASPECTS OF THE INTERNAL CONTROL SYSTEM FORMATION

    Directory of Open Access Journals (Sweden)

    Larisa I. Egorova

    2014-01-01

    Full Text Available The methodological aspects of the internal control system formation are stated in the article. The great attention is focused on the problems of financial statements misrepresentation. The basic principles and structure of the internal control system are discussed in this article.

  5. Internal control in the company in order to financial monitoring

    Directory of Open Access Journals (Sweden)

    Osipov A.V.

    2017-04-01

    Full Text Available the article explores the definition of financial monitoring, financial analysis and internal control in aspect to their correlation to fight money laundering and terrorism financing. Internal control is analyzed from the point of view of law, economics and management. The author pays much attention in the article to the work of systems of financial monitoring in organizations.

  6. Internal quality control in serological tests for syphilis.

    OpenAIRE

    Wasley, G D

    1985-01-01

    The importance of syphilis serological tests demands that laboratory reports are reliable. Internal quality control applied to the organisation of a syphilis serology service improves laboratory bench performance and reporting. Described here are internal quality control procedures of a department that serves a genitourinary medicine clinic and conducts 70 000 tests a year to investigate for syphilis.

  7. Convergence Between Kazakhstan’S Financial Systemand International Standards: Overcoming Difficulties

    Directory of Open Access Journals (Sweden)

    Uvarova Natalya

    2015-06-01

    Full Text Available This article deals with the convergence of the Kazakh financial system with international standards in light of the new, enhanced agreement with the European Union on partnership and cooperation (January 19, 2015. Based on this research, the approaches used by the Kazakh financial system to converge with the European Union (EU and the mechanism of implementing international standards in the national regulatory framework are determined. In practice, the study provides justification for the necessity of arranging the systematization of existing rules and regulations covering financial activity in the Republic, eliminating discrepancies between the national regulatory framework and international standards, and determining clear security guarantees for foreign investors’ financial activity in the Republic. The research results are primarily focused on the development of public finance management theory. Theories and conclusions present in the study can be used in the educational processes of economic and legal institutions and in the policymaking activity of public finance management bodies.

  8. Amendments to the Audit Report for the Review of International Standards on Auditing

    Directory of Open Access Journals (Sweden)

    Mortură Laura-Alexandra

    2017-01-01

    Full Text Available As a result of the last economic and financial crisis, the auditors' impact on its triggering wasquestioned, as the opinion expressed by the auditors directly influenced, the decisions taken by theusers of the financial and accounting information, namely the investors. The sign of question on theauditors 'work was also due to a lack of knowledge of the auditors' responsibility by the users. Theopinion issued by the auditor provides reasonable, but not absolute, assurance on the informationprovided by the financial statements, in which case the auditor's responsibility is limited. Tomitigate these discrepancies, the International Auditing and Assurance Standards Board (IAASBhas developed projects that have generated solutions to improve International Standards onAuditing. Thus, in 2015, the IAASB issued a new edition of the International Auditing Standards,which made changes in the drafting of the audit report.

  9. Language standardization in sociolinguistics and international business: Theory and practice across the table

    DEFF Research Database (Denmark)

    Linn, Andrew; Sanden, Guro Refsum; Piekkari, Rebecca

    2018-01-01

    Haugen to explain the history of modern Norwegian. The table is then turned and a model from international business by Piekkari, Welch and Welch is used to illuminate recent Norwegian language planning. It is found that the Grundfos case works well with the Haugen model, and the international business...... model provides a valuable practical lesson for national language planners, both showing that a “comparative standardology” is a valuable undertaking. More voices “at the table” will allow both theory and practice to be further refined and for the role of standards across society to be better understood.......This chapter addresses the issue of language standardization from two perspectives, bringing together a theoretical perspective offered by the discipline of sociolinguistics with a practical example from international business. We introduce the broad concept of standardization and embed the study...

  10. Review and Outlook of China Electronic and IT Industry Footprints in IEC International Standardization Activities

    Institute of Scientific and Technical Information of China (English)

    Hu Jingping

    2006-01-01

    @@ Year 2006 is the year marking the 100th anniversary of the founding of International Electrotechnical Commission (IEC). IEC is mainly engaged in the international standardization for electrical and electronic technology field aiming at promoting international trade and technology cooperation and exchange, improving product and service quality, upgrading productivity and protecting the environment as well as human health and safety. Most countries worldwide adopt standards developed and promulgated by IEC, providing a platform to international trade and technical exchange. China has being a member since 1957. Electronic and IT are the most developed and energetic filed in recent decades. Number of IEC TC/SC specialized in electronic and IT amounts up to 52.

  11. INTERNAL CONTROLS IN ENSURING GOOD CORPORATE GOVERNANCE IN FINANCIAL INSTITUTIONS

    Directory of Open Access Journals (Sweden)

    KOSMAS NJANIKE

    2011-01-01

    Full Text Available This paper assessed factors that influence the internal controls in ensuring good corporate governance in financial institutions in developing economies with special reference to Zimbabwe. The research paper assessed how lack of internal controls affected good corporate governance and aimed to bring out elements of good corporate governance. It emerged that failure to effectively implement internal controls contributed significantly to poor corporate governance. The study discovered that internal control system overrides and the issue of “fact cat” directors also contributed to poor corporate governance. The study recommended that there is need for the board of directors to guarantee an organizational structure that clearly defines management responsibilities, authority and reporting relationships. There is also need to ensure that delegated responsibilities are effectively carried out to ensure compliance with internal controls of the financial institution concerned.

  12. Implementing standardized, inter-unit communication in an international setting: handoff of patients from emergency medicine to internal medicine.

    Science.gov (United States)

    Balhara, Kamna S; Peterson, Susan M; Elabd, Mohamed Moheb; Regan, Linda; Anton, Xavier; Al-Natour, Basil Ali; Hsieh, Yu-Hsiang; Scheulen, James; Stewart de Ramirez, Sarah A

    2018-04-01

    Standardized handoffs may reduce communication errors, but research on handoff in community and international settings is lacking. Our study at a community hospital in the United Arab Emirates characterizes existing handoff practices for admitted patients from emergency medicine (EM) to internal medicine (IM), develops a standardized handoff tool, and assesses its impact on communication and physician perceptions. EM physicians completed a survey regarding handoff practices and expectations. Trained observers utilized a checklist based on the Systems Engineering Initiative for Patient Safety model to observe 40 handoffs. EM and IM physicians collaboratively developed a written tool encouraging bedside handoff of admitted patients. After the intervention, surveys of EM physicians and 40 observations were subsequently repeated. 77.5% of initial observed handoffs occurred face-to-face, with 42.5% at bedside, and in four different languages. Most survey respondents considered face-to-face handoff ideal. Respondents noted 9-13 patients suffering harm due to handoff in the prior month. After handoff tool implementation, 97.5% of observed handoffs occurred face-to-face (versus 77.5%, p = 0.014), with 82.5% at bedside (versus 42.5%, p face-to-face and bedside handoff, positively impacted workflow, and increased perceptions of safety by EM physicians in an international, non-academic setting. Our three-step approach can be applied towards developing standardized, context-specific inter-specialty handoff in a variety of settings.

  13. Analysis And Comments On The Consultative Document: International Framework For Liquidity Risk Measurement, Standards And Monitoring

    OpenAIRE

    Jacques Prefontaine; Jean Desrochers; Lise Godbout

    2010-01-01

    The market turmoil that began in mid-2007 re-emphasized the importance of liquidity to the functioning of financial markets and the banking sector. In December 2009, the Basel Committee on Banking Supervision (BCBS) of the Bank for International Settlements (BIS) released a consultative document entitled: “International Framework for Liquidity Risk Measurement, Standards and Monitoring”. Interested parties were invited to provide written comments by April 16th 2010. Given our interest in prom...

  14. Mass fragmentographic analysis of total cholesterol in serum using a heptadeuterated internal standard

    International Nuclear Information System (INIS)

    Wolthers, B.G.; Hindriks, F.R.; Muskiet, F.A.J.; Groen, A.

    1980-01-01

    A mass fragmentographic method for the determination of total cholesterol in serum using heptadeuterated [25,26,26,26,27,27,27- 2 H] cholesterol as internal standard is presented. The results obtained are compared with a colorimetric and gas chromatographic method which were previously proposed as reference methods. Criteria for the development of absolute measurement by means of mass fragmentography and stable isotopically labelled internal standards are given. The conclusion is drawn that, at present, mass fragmentographic methods for the determination of total cholesterol in serum do not fulfil the criteria required for absolute methods. (Auth.)

  15. [The revised Dutch College of General Practitioners' standard on COPD and the first international WHO standard: differences and similarities].

    Science.gov (United States)

    van Schayck, C P

    2002-02-23

    Two standards on COPD have recently been published: the revised national standard from the Dutch College of General Practitioners and the first international standard published by the World Health Organization and the US National Heart, Lung and Blood Institute. The reduced emphasis on the role of spirometry in the monitoring and evaluation of treatment is an important change in these new standards compared to previous ones. Cessation of smoking is considered to be central to the prevention and treatment of COPD. Doctors should strongly support this approach and, more than before, are urged to view COPD as a disease caused by addiction. Bronchodilators are the cornerstone of symptomatic treatment of COPD, particularly the long-acting ones due to their ease of administration and effective treatment of morning dyspnoea. Inhalation corticosteroids should only be administered as a trial treatment and only under certain conditions. Continuation of treatment with these agents is only justified if there is a demonstrated improvement in lung function, exacerbations or symptoms, although the precise area of indication is not yet clear.

  16. Bismuth as a general internal standard for lead in atomic absorption spectrometry

    International Nuclear Information System (INIS)

    Bechlin, Marcos A.; Fortunato, Felipe M.; Ferreira, Edilene C.; Neto, José A. Gomes; Nóbrega, Joaquim A.; Donati, George L.; Jones, Bradley T.

    2014-01-01

    Highlights: • Single internal standard is commonly proposed for definite application in AAS. • Internal standard for general use in AAS techniques is original. • Bi showed efficiency as internal standard for Pb determinations by FAAS and GFAAS. • Assorted samples were analyzed and accurate results were found. - Abstract: Bismuth was evaluated as internal standard for Pb determination by line source flame atomic absorption spectrometry (LS FAAS), high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS) and line source graphite furnace atomic absorption spectrometry (LS GFAAS). Analysis of samples containing different matrices indicated close relationship between Pb and Bi absorbances. Correlation coefficients of calibration curves built up by plotting A Pb /A Bi versus Pb concentration were higher than 0.9953 (FAAS) and higher than 0.9993 (GFAAS). Recoveries of Pb improved from 52–118% (without IS) to 97–109% (IS, LS FAAS); 74–231% (without IS) to 96–109% (IS, HR-CS FAAS); and 36–125% (without IS) to 96–110% (IS, LS GFAAS). The relative standard deviations (n = 12) were reduced from 0.6–9.2% (without IS) to 0.3–4.3% (IS, LS FAAS); 0.7–7.7% (without IS) to 0.1–4.0% (IS, HR-CS FAAS); and 2.1–13% (without IS) to 0.4–5.9% (IS, LS GFAAS)

  17. The role of food standards on international trade: assessing the Brazilian beef chain

    Directory of Open Access Journals (Sweden)

    Luciana Marques Vieira

    2006-01-01

    Full Text Available The purpose of this paper is to identify how Brazilian beef managers have responded to a rapid expansion and intensification of standards for beef exports. This issue relates to how some Brazilian beef exporters are strategically repositioning themselves in the supply chains. The literature of this study reviews global chain governance and international standards. The method uses case studies consisting of six medium and large scale beef exporters who export fresh beef to the European Union. The main findings describe the kinds of governance that stimulate upgrading and transferral of the best practices and, consequently, full compliance with mandatory standards. This study suggests that standards do matter for companies trying to increase international competitiveness. These results contribute an understanding of the Brazilian beef chain, and also of other supply chains coping with demanding and changing international markets. Managerial implications show the challengesfacing Brazilian beef exporters in their efforts to sustain exports to the European Union and how they are using chain governance to improve their compliance with international standards and increase competitiveness.

  18. The System 80+ Standard Plant design control document. Volume 11

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume covers parts 6 and 7 and appendix 7A for section 7 (Instrumentation and Control) of the ADM Design and Analysis. The topics covered by these are: other systems required for safety; control systems not required by safety; and CMF evaluation of limiting faults. Parts 1--3 of section 8 (Electric Power) of the ADM are also included in this volume. Topics covered by these parts are: introduction; offsite power system; and onsite power system

  19. The System 80+ Standard Plant design control document. Volume 18

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains the following technical specifications of section 16 (Technical Specifications) of the ADM Design and Analysis: TS 3.3 Instrumentation; TS 3.4 Reactor Coolant System; TS 3.5 Emergency Core Cooling System; TS 3.6 Containment Systems; TS 3.7 Plant Systems; TS 3.8 Electrical Power Systems; TS 3.9 Refueling Operations; TS 4.0 Design Features; TS 5.0 Administrative Controls. Appendix 16 A Tech Spec Bases is also included. It contains the following: TS B2.0 Safety Limits Bases; TS B3.0 LCO Applicability Bases; TS B3.1 Reactivity Control Bases; TS B3.2 Power Distribution Bases

  20. The System 80+ Standard Plant design control document. Volume 20

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains 2 technical specifications bases as part of Appendix 16 A Tech Spec Bases. They are TS B3.8 Electrical Power Technical Systems Bases and TS B3.9 Refueling Operations Bases. All 3 parts of section 17 (QA) and all 10 parts of section 18 (Human Factors) of the ADM Design and Analysis are contained in this volume. Topics covered in section 17 are: design phase QA; operations phase QA; and design phase reliability assurance. Topics covered by section 18 are: design team organization; design goals; design process; functional task analysis; control room configuration; information presentation; control and monitoring; verification and validation; and review documents

  1. Accountants’ Perceptions on the Adoption of International Financial Reporting Standards in Yemen

    OpenAIRE

    Al-Absy, Mujeeb Saif Mohsen; Ismail, Ku Nor Izah Ku; Al-Dubai, Shehabaddin Abdullah A.

    2016-01-01

    Developments in the global capital market have made the adoption of International Financial Reporting Standard (IFRSs) more significant than ever before. The purpose of this study is to examine the accountants’ perception of IFRSs adoption in Yemen. We also seek the accountants’ view on whether Yemen should adopt the IFRSs or not, and on the expected time taken to adopt the accounting standards. We also examine the difference in opinion between academicians and practitioners regarding the ado...

  2. Model Manajemen Laba Akrual Dan Riil Berbasis Implementasi International Financial Reporting Standards

    OpenAIRE

    Ahmar, Nurmala; Rokhmania, Nuraini; Samekto, Agus

    2016-01-01

    The aim of this study was to investigate the impact of inplementasi International Financial Reporting Standards (IFRS) on accrual earnings management and real earnings management. Adoption of accounting standards have an impact on the way of assessment, measurement and presentation. Samples are manufacturing companies listed in Indonesia Stock Exchange. Accrual earnings measurement method using five measurement approach, and three approaches to the measurement of real earnings management. The...

  3. Norms and international standards related to reduce risk management: A literature review

    Directory of Open Access Journals (Sweden)

    César Fuentes

    2011-09-01

    Full Text Available The current work aims to develop a revision of the literature within the main concepts in the international rules and standards related to risk management in companies. By this way, there will be an analysis of issues such as the COSO - ERM model, an introduction to the ISO 27000 and 31000 standards; and the Project Management according to PMI targeted at risk management

  4. A change of course: The importance to DoD of international standards for electronic commerce

    Science.gov (United States)

    Payne, Judith E.

    1991-12-01

    The U.S. Department of Defense (DoD) is committed to using electronic commerce in the future with the over 300,000 vendors interested in doing business with DoD. Electronic commerce will move DoD from a paper-based world to one based on electronic transactions enabled by the exchange of formatted, electronic messages referred to as electronic data interchange (EDI). With electronic commerce, DoD plans to reduce costs, increase effectiveness, and make it easier for vendors to deal with DoD. Benefits from electronic commerce are enhanced when many businesses use the same standards for EDI messages themselves and their transmission. The fewer standards used, the less time and resources must be spent translating messages and agreeing on how to use different standards. To enhance benefits and smooth the transition to electronic commerce for itself and its vendors, DoD has chosen to use the widely accepted American National Standards Institute (ANSI) X12 standards for EDI messages, coupled with international standards for delivering messages and organizing addresses. In the past 18 months, EDI standards sponsored by a United Nations body and serving the same purpose as ANSI X12 message standards have begun to gain wider acceptance internationally.

  5. Zambia Tobacco Control Campaign | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The looming tobacco epidemic and its potential for thwarting development has prompted most governments in sub-Saharan Africa to ratify the World Health Organization's Framework Convention on Tobacco Control (WHO-FCTC). Ratifying countries must design and implement a national tobacco control action plan and ...

  6. Inhibitory control in young children and its role in emerging internalization.

    Science.gov (United States)

    Kochanska, G; Murray, K; Jacques, T Y; Koenig, A L; Vandegeest, K A

    1996-04-01

    We examined inhibitory control as a quality of temperament that contributes to internalization. Children were assessed twice, at 26-41 months (N = 103) and at 43-56 months (N = 99), on repeated occasions, in multiple observational contexts and using parental reports. Comprehensive behavioral batteries incorporating multiple tasks were designed to measure inhibitory control at toddler and preschool age. They had good internal consistencies, corresponded with maternal ratings, and were developmentally sensitive. Individual children's performance was significantly correlated across both assessments, indicating stable individual differences. Girls surpassed boys at both ages. Children's internalization was observed while they were alone with prohibited objects, with a mundane chore, playing games that occasioned cheating, being induced to violate standards of conduct, and assessed using maternal reports. Inhibitory control was significantly associated with internalization, both contemporaneously and as a predictor in the longitudinal sense. The implications for considering children's temperament as a significant, yet often neglected contributor to developing internalization are discussed.

  7. Mengukur Tingkat Kesesuaian antara Standar Akuntansi Keuangan dengan International Financial Reporting Standards per 1 Januari 2008

    Directory of Open Access Journals (Sweden)

    Rosinta Ria Panggabean

    2010-05-01

    Full Text Available International accounting topic was rare to adress between accounting practices, especially International Accounting Standard. It occured due to the restrictive source and difficulty in finding the source. However, recently the standard has been an addressed issue since Indonesia Chartered of Accountant (IAI plans to comply the Indonesia Accounting Standard (SAK with the International Financialreporting(IFRSon1stJanuary2012.The purpose of the research is to measure the compliance of the (SAK per 1st January 2008 with the IFRS per 1st January 2008 and attain the association between those two standards. Hence, the difference between the two standards and the neccessary steps to be taken for complying can be obtained. The methodology will be used in the paper are Jaccard’s Coefficients, Spearman’s Correlation Coefficient,Euclidean Distances.The sample for the paper will be 43 accounting issues adressed on both standards that have been chosen and investigated. The paper concludes that there are significant equalities (75% between SAK per 1st January 2008 and IFRS 1st January 2008. (using Jaccard’s Coefficients. Due to several problems that have been found in the research, the author wish that the further researchers could widen the research’s samples, so the result will be more accurate and comprehensive. 

  8. Internal Decoupling in Nonlinear Process Control

    Directory of Open Access Journals (Sweden)

    Jens G. Balchen

    1988-07-01

    Full Text Available A simple method has been investigated for the total or partial removal of the effect of non-linear process phenomena in multi-variable feedback control systems. The method is based upon computing the control variables which will drive the process at desired rates. It is shown that the effect of model errors in the linearization of the process can be partly removed through the use of large feedback gains. In practice there will be limits on how large gains can he used. The sensitivity to parameter errors is less pronounced and the transient behaviour is superior to that of ordinary PI controllers.

  9. Internal Controlling of a Radiology Department.

    Science.gov (United States)

    Frewer, W; Busch, H P

    2015-11-01

    Caused by legal reform initiatives there is a continuous need to increase effectiveness and efficiency in hospitals and surgeries, and thus to improve processes.Consequently the successful management of radiological departments and surgeries requires suitable structures and optimization processes to make optimization in the fields of medical quality, service quality and efficiency possible.In future in the DRG System it is necessary that the organisation of processes must focus on the whole clinical treatment of the patients (Clinical Pathways). Therefore the functions of controlling must be more established and adjusted. On the basis of select Controlling instruments like budgeting, performance indicators, process optimization, staff controlling and benchmarking the target-based and efficient control of radiological surgeries and departments is shown. © Georg Thieme Verlag KG Stuttgart · New York.

  10. The System 80+ Standard Plant design control document. Volume 23

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains part 16 References and Appendix 19 A Design Alternatives for section 19 (Probabilistic Risk Assessment) of the ADM Design and Analysis. Also covered is section 20 Unresolved Safety Issues of the ADM Design and Analysis. Finally sections 1--6 of the ADM Emergency Operations Guidelines are contained in this volume. Information covered in these sections include: standard post-trip actions; diagnostic actions; reactor trip recovery guideline; LOCA recovery; SG tube rupture recovery

  11. The System 80+ Standard Plant design control document. Volume 1

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume covers the DCD introduction and contains sections 1 and parts 1--7 of section 2 of the CDM. Parts 1--7 included the following: (2.1) Design of SSC; (2.2) Reactor; (2.3) RCS and connected systems; (2.4) Engineered Safety Features; (2.5) Instrumentation and Control; (2.6) Electric Power; and (2.7) Auxiliary Systems

  12. The System 80+ Standard Plant design control document. Volume 10

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains Appendices 6A, 6B, and 6C for section 6 (Engineered Safety Features) of the ADM Design and Analysis. Also, parts 1--5 of section 7 (Instrumentation and Control) of the ADM Design and Analysis are covered. The following information is covered in these parts: introduction; reactor protection system; ESF actuation system; system required for safe shutdown; and safety-related display instrumentation

  13. The System 80+ Standard Plant design control document. Volume 17

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains parts 2-7 and appendix 15A for section 15 (Accident Analysis) of the ADM Design and Analysis. Topics covered in these parts are: decrease in heat removal; decrease in RCS flow rate; power distribution anomalies; increase in RCS inventory; decrease in RCS inventory; release of radioactive materials. The appendix covers radiological release models. Also contained here are five technical specifications for section 16 (Technical Specifications) of the ADM Design and Analysis. They are: TS 1.0 Use and Applications; TS 2.0 Safety Limits; TS 3.0 LCO Availability; TS 3.1 Reactivity Control; and TS 3.2 Power Distribution

  14. Rare earths analysis of rock samples by instrumental neutron activation analysis, internal standard method

    International Nuclear Information System (INIS)

    Silachyov, I.

    2016-01-01

    The application of instrumental neutron activation analysis for the determination of long-lived rare earth elements (REE) in rock samples is considered in this work. Two different methods are statistically compared: the well established external standard method carried out using standard reference materials, and the internal standard method (ISM), using Fe, determined through X-ray fluorescence analysis, as an element-comparator. The ISM proved to be the more precise method for a wide range of REE contents and can be recommended for routine practice. (author)

  15. [Criteria for the assessment of the noise-induced occupational hearing loss: international and national standards].

    Science.gov (United States)

    Izmerov, N F; Denisov, É I; Adeninskaia, E E; Gorblianskiĭ, Iu Iu

    2014-01-01

    The objective of the present paper was to review international and national standards for the criteria of assessment of the noise-induced occupational loss of hearing. The importance of healthy hearing for the occupational safety is emphasized which implies the necessity of the more rigorous criteria for hearing conservation in the workers engaged in the noisy technological environment compared with those for the general population. A rationale for the development of the standard program of hearing conservation in the workers engaged in the noisy technological environment is proposed including hygienic norms and rules or national state standards.

  16. Trend of the bioceramics (for the international standardization); Baioseramikkusu no doko. Kokusai hyojunka nimukete

    Energy Technology Data Exchange (ETDEWEB)

    Kurita, Manabu

    1999-11-01

    The Ministry of International Trade and Industry Agency of Industrial Science and Technology would carry out development research of the standardization of test evaluation method of fine ceramics for the organism as research and development business of the international standardization promotion plan since this fiscal year. The fine ceramics becomes not possible material of lacking as alternative material of the organism. The public standard which appropriately evaluates the quality material in the other has not been established. JIS in the home of the result which there is Japan Fine Ceramics Association standard (test methods such as porosity and specific gravity, grain size, pore distribution, specific surface, Vickers hardness, crystal structure, bending strength, compressive strength, elastic modulus, fracture toughness, effluent of the bioceramics) JIS has not been instituted. It is present state that it becomes the Europe and America initiative artificial joint artificial bone expert committee TC-150 surgical internal burying agent ISO (ISO) and takes the one step delay. And, security of the reliability is necessary in order to fulfil the popularization in the market. The standardization must be hurried up. Research and development of test evaluation method of fine ceramics for the organism was carried out in order to attempt market expansion taking the reliability of fine ceramics material performance for the organism in our country as a sure thing, and standardizing into JIS and international standardization would be systematically advanced. Efforts would be made in fiscal 99 for research and development of evaluation method on abrasion resistance of artificial bone member subject, mechanical property such as strength degradation and biocompatibility. The technical committee of the industry-government-university from the specialist which consists in this inside is founded, and the deliberation for plan execution of this study development is got and will be

  17. Legislation, standards and methods for mercury emissions control

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-04-15

    Mercury is an element of growing global concern. The United Nations Environment Programme plans to finalise and ratify a new global legally-binding convention on mercury by 2013. Canada already has legislation on mercury emissions from coal-fired utilities and the USA has recently released the new Mercury and Air Toxics Standard. Although other countries may not have mercury-specific legislation as such, many have legislation which results in significant co-benefit mercury reduction due to the installation of effective flue-gas cleaning technologies. This report reviews the current situation and trends in mercury emission legislation and, where possible, discusses the actions that will be taken under proposed or impending standards globally and regionally. The report also reviews the methods currently applied for mercury control and for mercury emission measurement with emphasis on the methodologies most appropriate for compliance. Examples of the methods of mercury control currently deployed in the USA, Canada and elsewhere are included.

  18. A Design Method of Robust Servo Internal Model Control with Control Input Saturation

    OpenAIRE

    山田, 功; 舩見, 洋祐

    2001-01-01

    In the present paper, we examine a design method of robust servo Internal Model Control with control input saturation. First of all, we clarify the condition that Internal Model Control has robust servo characteristics for the system with control input saturation. From this consideration, we propose new design method of Internal Model Control with robust servo characteristics. A numerical example to illustrate the effectiveness of the proposed method is shown.

  19. Electromagnetic field standards in Central and Eastern European countries: current state and stipulations for international harmonization.

    Science.gov (United States)

    Gajsek, P; Pakhomov, A G; Klauenberg, B J

    2002-04-01

    Electromagnetic field standards in the West are based on well-established acute biological effects that could be considered as signaling a potentially adverse health effect. The specific absorption rate, which is proportional to the tissue heating (thermal effects), represents the basic restriction of exposure to Radio-Frequency (RF) fields. On the other hand, Eastern European standards are designed to protect from potential non-thermal effects that might be caused by chronic exposure to very low intensities, where a so-called "power load" (a product of field intensity and duration of exposure) represents the basic limitation. Thus, electromagnetic field standards in Eastern European countries differ considerably from those which are proposed by the International Commission of Non-ionizing Radiation Protection and the Standards Coordinating Committee 28 of the Institute of Electrical and Electronics Engineers, Inc. In the present paper, the strategies for development of exposure limit values in electromagnetic fields standards currently in force in Eastern and Central European countries are discussed. Some differences as well as similarities of the national health and safety standards and the main obstacles to harmonization of these standards with those being established by Western national and international organizations and agencies are presented.

  20. An International Standard Set of Patient-Centered Outcome Measures After Stroke

    NARCIS (Netherlands)

    Salinas, J. (Joel); Sprinkhuizen, S.M. (Sara M.); Ackerson, T. (Teri); Bernhardt, J. (Julie); Davie, C. (Charlie); George, M.G. (Mary G.); Gething, S. (Stephanie); Kelly, A.G. (Adam G.); Lindsay, P. (Patrice); Liu, L. (Liping); Martins, S.C.O. (Sheila C.O.); Morgan, L. (Louise); B. Norrving (Bo); Ribbers, G.M. (Gerard M.); Silver, F.L. (Frank L.); Smith, E.E. (Eric E.); Williams, L.S. (Linda S.); Schwamm, L.H. (Lee H.)

    2015-01-01

    markdownabstract__BACKGROUND AND PURPOSE:__ Value-based health care aims to bring together patients and health systems to maximize the ratio of quality over cost. To enable assessment of healthcare value in stroke management, an international standard set of patient-centered stroke outcome measures

  1. National tax regulation, voluntary international standards and the GATS : Argentina – financial services

    NARCIS (Netherlands)

    Delimatsis, Panagiotis; Hoekman, Bernard

    2018-01-01

    Can a WTO Member discriminate against foreign suppliers of services located in jurisdictions that refuse to share information with a government to permit it to determine if its nationals engage in tax evasion? Does it matter if the Member uses standards developed by an international body as the

  2. Media Representations of National and International Standardized Testing in the Israeli Education System

    Science.gov (United States)

    Yemini, Miri; Gordon, Noa

    2017-01-01

    This study applies discourse analysis to Israeli media coverage of national and international standardized examinations within Israel's public education system. Through systematic analysis of the topic in the two main Israeli financial publications between the years 2000 and 2013, we explore the nature and narrative of the media and compare the…

  3. The unstable core of global finance: contingent valuation and governance of international accounting standards

    NARCIS (Netherlands)

    Mügge, D.; Stellinga, B.

    2015-01-01

    Accounting standards are the foundations of the financial regulatory edifice, and global financial governance is no more stable than the asset valuations that feed it. Yet for two decades and up to this day, no international accounting rule for financial instruments - the bulk of banks' balance

  4. A new internal standard for HPLC assay of conjugated linoleic acid in animal tissues and milk

    Czech Academy of Sciences Publication Activity Database

    Czauderna, M.; Kowalczyk, J.; Marounek, Milan; Michalski, J. P.; Rozbicka-Wieczorek, A. J.; Krajewska, K. A.

    2011-01-01

    Roč. 56, č. 1 (2011), s. 23-29 ISSN 1212-1819 Institutional research plan: CEZ:AV0Z50450515 Keywords : sorbic acid * internal standard * CLA isomers Subject RIV: GH - Livestock Nutrition Impact factor: 1.079, year: 2011

  5. Processes in the development of international specialist competencies and standards: the Sports Physiotherapy for All Project.

    Science.gov (United States)

    Bulley, Catherine; Donaghy, Marie

    2008-01-01

    In a world of rapidly developing knowledge it is important that professions describe their roles and capabilities. The need for a thorough description of sports physiotherapy was addressed through collaboration between the International Federation of Sports Physiotherapy (IFSP) and five European higher education institutions. This resulted in the Sports Physiotherapy for All Project, which has been successful in developing internationally accepted competencies and standards for sports physiotherapists. This article describes and reflects on the process to communicate useful lessons. A competency model was chosen to facilitate differentiation and communication of aspects of sports physiotherapy practice. Documentation relating to sports physiotherapy practice was collected from 16 countries and analysed thematically. A cut and paste method was used by a panel of experts to allocate themes to areas of practice within the competency model. Theme groups were used to select areas of practice for description in competency form. Standards were derived from competencies following in depth discussion with the expert panel, and triangulation with themes derived from international documentation. A rigorous process of international review and revision led to the final list of 11 competencies and related standards, both accepted by the IFSP. This work provides a foundation for the development of an audit toolkit to guide demonstration and evaluation of competencies and standards. This provides a foundation for targeted career development activities, appropriate provision of training opportunities, and quality enhancement. The experiences gained during this project can inform other health professions and their specialisms when embarking on a similar journey.

  6. INTERNATIONAL ACCOUNTING STANDARDS AND THEIR INFLUENCE ON THE MANAGEMENT OF A COMPANY.

    Directory of Open Access Journals (Sweden)

    ANA - MARIA MĂLĂESCU

    2015-03-01

    Full Text Available The accounting standardization process is in progress at international and regional level, more and more countries have reached the same conclusion of enforcing high quality accounting standards like IAS / IFRS. There are various reasons for Romania adopting the international accounting referential most of them subordinated to its central aim, respectively EU accession. In our country the accounting system is subordinated to the taxation system, financing still comes prevalent from banks and very few Romanian companies are listed on foreign capital markets. Romania is an ex-communist emergent country in wich changes in the economic and political environment merely started only after the end of the communist regime in the early 1990s. Many European companies already observed that by enforcing IFRS standards they have access to international capital markets, they could reduce expenses and unroll international transactions easier. It is improbable that a financial reporting, which is not easy understood by all its users, would offer new business opportunities or additional capital.Therefore, a significant number of companies, either voluntarily enforce IFRS standards, or they are pledged by the government to do this.

  7. A Principles-Based Approach to Teaching International Financial Reporting Standards (IFRS)

    Science.gov (United States)

    Persons, Obeua

    2014-01-01

    This article discusses the principles-based approach that emphasizes a "why" question by using the International Accounting Standards Board (IASB) "Conceptual Framework for Financial Reporting" to question and understand the basis for specific differences between IFRS and U.S. generally accepted accounting principles (U.S.…

  8. The Effect of International Financial Reporting Standards Convergence on U. S. Accounting Curriculum

    Science.gov (United States)

    Bates, Homer L.; Waldrup, Bobby E.; Shea, Vincent

    2011-01-01

    Major changes are coming to U.S. financial accounting and accounting education as U. S. generally accepted accounting principles (GAAP) and international financial reporting standards (IFRS) converge within the next few years. In 2008, the U.S. Securities and Exchange Commission (SEC) published a proposed "road map" for the potential…

  9. The Impact of International Financial Reporting Standards on Accounting Curriculum in the United States

    Science.gov (United States)

    Yallapragada, RamMohan R.; Toma, Alfred G.; Roe, C. William

    2011-01-01

    According to the time line presently specified by the Securities and Exchange Commission (SEC), business firms in the United States (US) should switch from the existing US accounting reporting guidelines of the Generally Accepted Accounting Principles (GAAP) to International Financial Reporting Standards (IFRS) by the year 2014. The US business…

  10. Basic safety standards for radiation protection and their application to internal exposures

    International Nuclear Information System (INIS)

    Dousset, M.

    Following a summary of the basic concepts on radiation protection units, the safety standards now in effect in France and those recommended by the International Commission on Radiological Protection (ICRP Publication 9, 1965) to be used as a basis to the next Euratom regulations are developed [fr

  11. International Comparisons of Foundation Phase Number Domain Mathematics Knowledge and Practice Standards

    Science.gov (United States)

    Human, Anja; van der Walt, Marthie; Posthuma, Barbara

    2015-01-01

    Poor mathematics performance in schools is both a national and an international concern. Teachers ought to be equipped with relevant subject matter knowledge and pedagogical content knowledge as one way to address this problem. However, no mathematics knowledge and practice standards have as yet been defined for the preparation of Foundation Phase…

  12. International standard on auditing 800 the auditor`s report on special purpose audit engagements

    OpenAIRE

    Jovanova, Blagica

    2011-01-01

    The purpose of this report is to show the main characteristics of the international standard on auditing 800. ISA 800 explains requirements by making a report on financial statements prepared in accordance with another comprehensive basis of accounting, on a component of financial statements, on compliance with contractual agreements or reports on summarized financial statements.

  13. Medical laboratories in sub-Saharan Africa that meet international quality standards.

    Science.gov (United States)

    Schroeder, Lee F; Amukele, Timothy

    2014-06-01

    A recent survey of laboratories in Kampala, Uganda, demonstrated that only 0.3% of laboratories (3/954) met international quality standards. To benchmark laboratory quality throughout the rest of sub-Saharan Africa (SSA), we compiled a list of SSA laboratories meeting international quality standards. Accrediting bodies were queried via online registries or direct communication in May 2013. There were 380 laboratories accredited to international standards in SSA. Ninety-one percent were in South Africa. Thirty-seven of 49 countries had no laboratories accredited to international quality standards. Accredited laboratory density (per million people) in South Africa, Namibia, and Botswana were similar to those in many European countries. Single variable linear regression showed a correlation between accredited laboratory density and health expenditures per person (adjusted R(2) = 0.81, P clinical laboratory. For those that do, there is a strong correlation between country-specific accredited laboratory density and per-capita health expenditures. Copyright© by the American Society for Clinical Pathology.

  14. Knowledge about plant is basis for successful cultivation : new international standard handbook on plant physiology

    NARCIS (Netherlands)

    Esch, van H.; Heuvelink, E.; Kierkels, T.

    2015-01-01

    ‘Plant physiology in Greenhouses’ is the new international standard handbook on plant knowledge for the commercial greenhouse grower. It relates the functioning of the plant to the rapid developments in greenhouse cultivation. It is based on a continuing series of plant physiology articles published

  15. 75 FR 80761 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

    Science.gov (United States)

    2010-12-23

    ... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 63 [EPA-HQ-OAR-2008-0708, FRL-9244-2] RIN 2060-AP36 National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines... combustion engines and requesting public comment on one issue arising from the final rule. Specifically, EPA...

  16. Differences in Students' Reading Comprehension of International Financial Reporting Standards: A South African Case

    Science.gov (United States)

    Coetzee, Stephen A.; Janse van Rensburg, Cecile; Schmulian, Astrid

    2016-01-01

    This study explores differences in students' reading comprehension of International Financial Reporting Standards in a South African financial reporting class with a heterogeneous student cohort. Statistically significant differences were identified for prior academic performance, language of instruction, first language and enrolment in the…

  17. Adopting the international financial reporting standards: a positive impact on 2004 income and consolidated equity

    International Nuclear Information System (INIS)

    Mallet, O.

    2005-03-01

    This document provides preliminary information on the quantitative impact of transition to the International Financial Reporting Standards (IFRS) on AREVA 2004 financial position, in accordance with AMF recommendations regarding financial communications during the transition period.The basis for preparing 2004 information on transition to the IFRS comes from: the International Accounting Standards (IAS)/IFRS, as approved by the European Union. The impact of IAS 32/39 and IFRS 4 will not be recognized in shareholders equity until January 1, 2005; AREVA anticipation of the resolution of technical issues and ongoing projects under discussion by the International Accounting Standards Board (IASB) and the International Financial Reporting Interpretations Committee (IFRIC). Uncertainty factors on practical methods for applying certain standards and ongoing interpretations by IFRIC and regulatory organizations could impact the exactness of restatements identified at this stage. For all of these reasons, it is conceivable that the opening balance sheet at January 1, 2004, as presented in this document, will not be the balance sheet actually used to establish the consolidated financial statements for 2005. (author)

  18. The Quality Control of Reference Standards in Metrology Dosimetry

    International Nuclear Information System (INIS)

    Lazarevic, Dj.; Ciraj Bjelac, O.; Kovacevic, M.; Vukcevic, M.

    2008-01-01

    This works presents the quality control tests applied to two types of ionization chambers with suitable electrometers. Measuring assemblies were tested in order to assess their performance and adequacy for use as reference standards in ionising radiation metrology laboratory for calibrations in the field of radiotherapy and radiation protection. Two types of ionizing chambers (Farmer type, 0.6 cm 3 and spherical ionizing chamber, 1 l) with suitable electrometers were tested. Following test were performed: repeatability, long term stability, polarity and leakage current measurement. All tested measuring assemblies demonstrated proper performance, correctness and high reliance of measurements, since all implemented quality control test results were within acceptable limits. (author)

  19. [Discussion on research thinking of traditional Chinese medicine standardization system based on whole process quality control].

    Science.gov (United States)

    Dong, Ling; Sun, Yu; Pei, Wen-Xuan; Dai, Jun-Dong; Wang, Zi-Yu; Pan, Meng; Chen, Jiang-Peng; Wang, Yun

    2017-12-01

    The concept of "Quality by design" indicates that good design for the whole life cycle of pharmaceutical production enables the drug to meet the expected quality requirements. Aiming at the existing problems of the traditional Chinese medicine (TCM) industry, the TCM standardization system was put forward in this paper from the national strategic level, under the guidance by the idea of quality control in international manufacturing industry and with considerations of TCM industry's own characteristics and development status. The connotation of this strategy was to establish five interrelated systems: multi-indicators system based on tri-indicators system, quality standard and specification system of TCM herbal materials and decoction pieces, quality traceability system, data monitoring system based on whole-process quality control, and whole-process quality management system of TCM, and achieve the whole process systematic and scientific study in TCM industry through "top-level design-implement in steps-system integration" workflow. This article analyzed the correlation between the quality standards of all links, established standard operating procedures of each link and whole process, and constructed a high standard overall quality management system for TCM industry chains, in order to provide a demonstration for the establishment of TCM whole-process quality control system and provide systematic reference and basis for standardization strategy in TCM industry. Copyright© by the Chinese Pharmaceutical Association.

  20. Control of electron internal transport barriers in TCV

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, M A; Behn, R; Coda, S; Condrea, I; Duval, B P; Goodman, T P; Karpushov, A; Martin, Y; Martynov, An; Moret, J-M; Nikkola, P; Porte, L; Sauter, O; Scarabosio, A; Zhuang, G [Centre de Recherches en Physique des Plasmas, Association EURATOM-Confederation Suisse, Ecole Polytechnique Federale de Lausanne, CRPP-EPFL, 1015 Lausanne (Switzerland)

    2004-05-01

    Current profile tailoring has been performed by application of electron cyclotron heating (ECH) and electron cyclotron current drive, leading to improved energy confinement in the plasma core of the TCV tokamak. The improved confinement is characterized by a substantial enhancement (H-factor) of the global electron energy confinement time relative to the prediction of the RLW scaling law (Rebut P H et al 1989 Proc. 12th Int. Conf. of Plasma Physics and Controlled Fusion Research (Nice, 1988) vol 2 (Vienna: IAEA) p 191), which predicts well Ohmic and standard ECH discharges on TCV. The improved confinement is attributed to a hollow current density profile producing a reversed shear profile creating an electron internal transport barrier. We relate the strength of the barrier to the depth of the hollow current density profile and the volume enclosed by the radial location of the peak current density. The {rho}{sub T}{sup *} (Tresset G et al 2002 Nucl. Fusion 42 520) criterion is used to evaluate the performance of the barrier relative to changes in the ECH parameters or the addition of Ohmic current, which aid in identifying the control parameters available for improving either the strength or volume of the barrier for enhanced performance. A figure of merit for the global scaling factor is used that scales the confinement enhancement as the product of the barrier volume and strength.

  1. Control of electron internal transport barriers in TCV

    International Nuclear Information System (INIS)

    Henderson, M A; Behn, R; Coda, S; Condrea, I; Duval, B P; Goodman, T P; Karpushov, A; Martin, Y; Martynov, An; Moret, J-M; Nikkola, P; Porte, L; Sauter, O; Scarabosio, A; Zhuang, G

    2004-01-01

    Current profile tailoring has been performed by application of electron cyclotron heating (ECH) and electron cyclotron current drive, leading to improved energy confinement in the plasma core of the TCV tokamak. The improved confinement is characterized by a substantial enhancement (H-factor) of the global electron energy confinement time relative to the prediction of the RLW scaling law (Rebut P H et al 1989 Proc. 12th Int. Conf. of Plasma Physics and Controlled Fusion Research (Nice, 1988) vol 2 (Vienna: IAEA) p 191), which predicts well Ohmic and standard ECH discharges on TCV. The improved confinement is attributed to a hollow current density profile producing a reversed shear profile creating an electron internal transport barrier. We relate the strength of the barrier to the depth of the hollow current density profile and the volume enclosed by the radial location of the peak current density. The ρ T * (Tresset G et al 2002 Nucl. Fusion 42 520) criterion is used to evaluate the performance of the barrier relative to changes in the ECH parameters or the addition of Ohmic current, which aid in identifying the control parameters available for improving either the strength or volume of the barrier for enhanced performance. A figure of merit for the global scaling factor is used that scales the confinement enhancement as the product of the barrier volume and strength

  2. Helicopter internal noise control: Three case histories

    Science.gov (United States)

    Edwards, B. D.; Cox, C. R.

    1978-01-01

    Case histories are described in which measurable improvements in the cabin noise environments of the Bell 214B, 206B, and 222 were realized. These case histories trace the noise control efforts followed in each vehicle. Among the design approaches considered, the addition of a fluid pulsation damper in a hydraulic system and the installation of elastomeric engine mounts are highlighted. It is concluded that substantial weight savings result when the major interior noise sources are controlled by design, both in altering the noise producing mechanism and interrupting the sound transmission paths.

  3. Determinants of human resource investment in internal controls

    Directory of Open Access Journals (Sweden)

    Jong-Hag Choi

    2013-09-01

    Full Text Available Using the unique reporting environment in Korea, this study investigates the determinants of human resource investment in internal controls for 1352 listed firms disclosing the number of personnel who are in charge of internal control-related tasks (IC personnel from 2005 to 2008. We find that the number of IC personnel within a firm and several key departments increase with firm size, number of employees, complexity and for Chaebols, and decrease in rapidly growing firms. Additional analysis reveals that the factors influencing internal control systems have an accentuated effect on firms with relatively larger firm size.

  4. Measurement of Henry's Law Constants Using Internal Standards: A Quantitative GC Experiment for the Instrumental Analysis or Environmental Chemistry Laboratory

    Science.gov (United States)

    Ji, Chang; Boisvert, Susanne M.; Arida, Ann-Marie C.; Day, Shannon E.

    2008-01-01

    An internal standard method applicable to undergraduate instrumental analysis or environmental chemistry laboratory has been designed and tested to determine the Henry's law constants for a series of alkyl nitriles. In this method, a mixture of the analytes and an internal standard is prepared and used to make a standard solution (organic solvent)…

  5. ASTM international workshop on standards and measurements for tissue engineering scaffolds.

    Science.gov (United States)

    Simon, Carl G; Yaszemski, Michael J; Ratcliffe, Anthony; Tomlins, Paul; Luginbuehl, Reto; Tesk, John A

    2015-07-01

    The "Workshop on Standards & Measurements for Tissue Engineering Scaffolds" was held on May 21, 2013 in Indianapolis, IN, and was sponsored by the ASTM International (ASTM). The purpose of the workshop was to identify the highest priority items for future standards work for scaffolds used in the development and manufacture of tissue engineered medical products (TEMPs). Eighteen speakers and 78 attendees met to assess current scaffold standards and to prioritize needs for future standards. A key finding was that the ASTM TEMPs subcommittees (F04.41-46) have many active "guide" documents for educational purposes, but few standard "test methods" or "practices." Overwhelmingly, the most clearly identified need was standards for measuring the structure of scaffolds, followed by standards for biological characterization, including in vitro testing, animal models and cell-material interactions. The third most pressing need was to develop standards for assessing the mechanical properties of scaffolds. Additional needs included standards for assessing scaffold degradation, clinical outcomes with scaffolds, effects of sterilization on scaffolds, scaffold composition, and drug release from scaffolds. Discussions highlighted the need for additional scaffold reference materials and the need to use them for measurement traceability. Workshop participants emphasized the need to promote the use of standards in scaffold fabrication, characterization, and commercialization. Finally, participants noted that standards would be more broadly accepted if their impact in the TEMPs community could be quantified. Many scaffold standard needs have been identified and focus is turning to generating these standards to support the use of scaffolds in TEMPs. © 2014 Wiley Periodicals, Inc.

  6. The role of the international radiation protection association in development and implementation of radiation protection standards

    International Nuclear Information System (INIS)

    Metcalf, P.; Lochard, J.; Webb, G.

    2002-01-01

    The International Radiation Protection Association (IRPA) is an affiliation of national and regional professional societies. Its individual membership is approaching some 20 000 professionals from 42 societies and covering 50 countries. Its primary objective is to provide a platform for collaboration between members of its affiliate societies to further radiation protection and safety. The IRPA is mandated to promote and facilitate the establishment of radiation protection societies, support international meetings and to encourage international publications, research and education and the establishment and review of standards. Through its membership base and its observer status on bodies such as the ICRP and the safety standards committees of the IAEA, the IRPA is in a position to provide valuable input to the safety standards development process. This factor has been increasingly recognised more recently within the IRPA and the various organisations involved in the development of safety standards. This paper addresses the mechanisms that have been established to enhance the input of the IRPA into the safety standards development process and for their subsequent implementation. (author)

  7. Inequality of living standards in Russia: internal and international context (the early 1990s and the 2000s

    Directory of Open Access Journals (Sweden)

    Vyacheslav Nikolaevich Bobkov

    2013-09-01

    Full Text Available The article studies the relationship of social groups about income distribution and goods consumption. It is dedicated to the internal and international aspects of inequality of living standards in Russia during the period of capitalist transformations of 1990-2000’s. Problems of the dynamics of inequality in living standards are analyzed. Methods of comparative analysis and comparison of performance indicators with normative social standards are used. On this basis, the population is classified into social groups and then follows the analysis of their social position. Such indicators are used: income inequality by consumption; inequality by housing, by education and health care availability. Russia is compared with countries of G20. Social inequality reasons in Russia are revealed. The obtained results can be applied within national economic and social policy. The findings indicated that the high social inequality in Russia undermines the ability of a large part of the population to be «included» in economic growth, for it limits access to its results. In such situation, an attempt to solve both the problem of speeding up economic growth and the eradication of poverty cannot lead to success if appropriate measures to reduce social inequality are not developed and implemented.

  8. Occupational radiation exposure in international recommendations on radiation protection: Basic standards under review

    International Nuclear Information System (INIS)

    Kraus, W.

    1996-01-01

    The ICRP publication 60 contains a number of new recommendations on the radiological protection of occupationally exposed persons. The recommendations have been incorporated to a very large extent in the BSS, the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources, a publication elaborated by the IAEA in cooperation with many other international organisations, and in the Euratom Basic Safety Standards (EUR) to be published soon. However, there exist some considerable discrepancies in some aspects of the three publications. The ICRP committee has set up a task group for defining four general principles of occupational radiation protection, and a safety guide is in preparation under the responsibility of the IAEA. ''StrahlenschutzPraxis'' will deal with this subject in greater detail after publication of these two important international publications. The article in hand discusses some essential aspects of the recommendations published so far. (orig.) [de

  9. International lighting in controlled environments workshop: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    Lighting is a central and critical aspect of control in environmental research for plant research and is gaining recognition as a significant factor to control carefully for animal and human research. Thus this workshop was convened to reevaluate the technology that is available today and to work toward developing guidelines for the most effective use of lighting in controlled environments with emphasis on lighting for plants but also to initiate interest in the development of improved guidelines for human and animal research. There are a number of established guidelines for lighting in human and animal environments. Development of new lighting guidelines is necessary for three reasons: (1) recent scientific discoveries show that in addition to supporting the sensation of vision, light has profound nonvisual biological and behavioral effects in both animals and humans; (2) federal regulations (EPACT 1992) are requiring all indoor environments to become more energy efficient with a specific emphasis on energy conservation in lighting; (3) lighting engineers and manufacturers have developed a wealth of new light sources and lighting products that can be applied in animal and human environments. The workshop was aimed at bringing together plant scientists and physical scientists to interact in the discussions. It involved participation of biological scientists involved in studying mechanisms of light reactions and those involved in utilizing lighting for production of plants and maintenance of animals in controlled environments. It included participation of physical scientists from universities and government involved in research as well as those from industry involved in producing lamps and in construction of controlled growth facilities. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  10. Photon activation analysis using internal standards: some studies of the analysis of environmental materials

    Energy Technology Data Exchange (ETDEWEB)

    Masumoto, K; Yagi, M

    1986-01-01

    The authors report the application of the internal standard method to the simultaneous determination of trace elements in environmental reference materials. The standard soil material used was IAEA CRM Soil-5. The power plant fly ash reference used was NBS SRM-1633a. Fifteen target elements, including As, Ba and Ce, were determined. Internal standards were supplied by six elements, including Na and Mg. Although there were several interfering elements, their effect could be eliminated by utilizing more than one gamma-ray peak and carrying out appropriate corrections. The values determined for most of the target elements were well within the certified range. Measured concentrations were of the orders of 10 to 1000 ..mu..g/g. 6 references, 2 figures, 5 tables.

  11. International standard problem (ISP) no. 41 follow up exercise: Containment iodine computer code exercise: parametric studies

    Energy Technology Data Exchange (ETDEWEB)

    Ball, J.; Glowa, G.; Wren, J. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada); Ewig, F. [GRS Koln (Germany); Dickenson, S. [AEAT, (United Kingdom); Billarand, Y.; Cantrel, L. [IPSN (France); Rydl, A. [NRIR (Czech Republic); Royen, J. [OECD/NEA (France)

    2001-11-01

    This report describes the results of the second phase of International Standard Problem (ISP) 41, an iodine behaviour code comparison exercise. The first phase of the study, which was based on a simple Radioiodine Test Facility (RTF) experiment, demonstrated that all of the iodine behaviour codes had the capability to reproduce iodine behaviour for a narrow range of conditions (single temperature, no organic impurities, controlled pH steps). The current phase, a parametric study, was designed to evaluate the sensitivity of iodine behaviour codes to boundary conditions such as pH, dose rate, temperature and initial I{sup -} concentration. The codes used in this exercise were IODE(IPSN), IODE(NRIR), IMPAIR(GRS), INSPECT(AEAT), IMOD(AECL) and LIRIC(AECL). The parametric study described in this report identified several areas of discrepancy between the various codes. In general, the codes agree regarding qualitative trends, but their predictions regarding the actual amount of volatile iodine varied considerably. The largest source of the discrepancies between code predictions appears to be their different approaches to modelling the formation and destruction of organic iodides. A recommendation arising from this exercise is that an additional code comparison exercise be performed on organic iodide formation, against data obtained front intermediate-scale studies (two RTF (AECL, Canada) and two CAIMAN facility, (IPSN, France) experiments have been chosen). This comparison will allow each of the code users to realistically evaluate and improve the organic iodide behaviour sub-models within their codes. (author)

  12. International standard problem (ISP) no. 41 follow up exercise: Containment iodine computer code exercise: parametric studies

    International Nuclear Information System (INIS)

    Ball, J.; Glowa, G.; Wren, J.; Ewig, F.; Dickenson, S.; Billarand, Y.; Cantrel, L.; Rydl, A.; Royen, J.

    2001-11-01

    This report describes the results of the second phase of International Standard Problem (ISP) 41, an iodine behaviour code comparison exercise. The first phase of the study, which was based on a simple Radioiodine Test Facility (RTF) experiment, demonstrated that all of the iodine behaviour codes had the capability to reproduce iodine behaviour for a narrow range of conditions (single temperature, no organic impurities, controlled pH steps). The current phase, a parametric study, was designed to evaluate the sensitivity of iodine behaviour codes to boundary conditions such as pH, dose rate, temperature and initial I - concentration. The codes used in this exercise were IODE(IPSN), IODE(NRIR), IMPAIR(GRS), INSPECT(AEAT), IMOD(AECL) and LIRIC(AECL). The parametric study described in this report identified several areas of discrepancy between the various codes. In general, the codes agree regarding qualitative trends, but their predictions regarding the actual amount of volatile iodine varied considerably. The largest source of the discrepancies between code predictions appears to be their different approaches to modelling the formation and destruction of organic iodides. A recommendation arising from this exercise is that an additional code comparison exercise be performed on organic iodide formation, against data obtained front intermediate-scale studies (two RTF (AECL, Canada) and two CAIMAN facility, (IPSN, France) experiments have been chosen). This comparison will allow each of the code users to realistically evaluate and improve the organic iodide behaviour sub-models within their codes. (author)

  13. Concept of Draft International Standard for a Unified Approach to Space Program Quality Assurance

    Science.gov (United States)

    Stryzhak, Y.; Vasilina, V.; Kurbatov, V.

    2002-01-01

    For want of the unified approach to guaranteed space project and product quality assurance, implementation of many international space programs has become a challenge. Globalization of aerospace industry and participation of various international ventures with diverse quality assurance requirements in big international space programs requires for urgent generation of unified international standards related to this field. To ensure successful fulfillment of space missions, aerospace companies should design and process reliable and safe products with properties complying or bettering User's (or Customer's) requirements. Quality of the products designed or processed by subcontractors (or other suppliers) should also be in compliance with the main user (customer)'s requirements. Implementation of this involved set of unified requirements will be made possible by creating and approving a system (series) of international standards under a generic title Space Product Quality Assurance based on a system consensus principle. Conceptual features of the baseline standard in this system (series) should comprise: - Procedures for ISO 9000, CEN and ECSS requirements adaptation and introduction into space product creation, design, manufacture, testing and operation; - Procedures for quality assurance at initial (design) phases of space programs, with a decision on the end product made based on the principle of independence; - Procedures to arrange incoming inspection of products delivered by subcontractors (including testing, audit of supplier's procedures, review of supplier's documentation), and space product certification; - Procedures to identify materials and primary products applied; - Procedures for quality system audit at the component part, primary product and materials supplier facilities; - Unified procedures to form a list of basic performances to be under configuration management; - Unified procedures to form a list of critical space product components, and unified

  14. The System 80+ Standard Plant design control document. Volume 19

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains five technical specification bases that are part of Appendix 16 A of the ADM Design and Analysis. They are: TS B3.3 Instrumentation Bases; TS B3.4 RCS Bases; TS B3.5 ECCS Bases; TS B3.6 Containment Systems Bases; and TS B3.7 Plant Systems Bases

  15. The System 80+ Standard Plant design control document. Volume 21

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains parts 1--10 of section 19 (Probabilistic Risk Assessment) of the ADM Design and Analysis. Topics covered are: methodology; initiating event evaluation; accident sequence determination; data analysis; systems analysis; external events analysis; shutdown risk assessment; accident sequence quantification; and sensitivity analysis. Also included in this volume are Appendix 19.8A Shutdown Risk Assessment and Appendix A to Appendix 19.8A Request for Information

  16. The System 80+ Standard Plant design control document. Volume 2

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume covers the following information of the CDM: (2.8) Steam and power conversion; (2.9) Radioactive waste management; (2.10) Tech Support Center; (2.11) Initial test program; (2.12) Human factors; and sections 3, 4, and 5. Also covered in this volume are parts 1--6 of section 1 (General Plant Description) of the ADM Design and Analysis

  17. The System 80+ Standard Plant design control document. Volume 15

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains all five parts of section 12 (Radiation Protection) of the ADM Design and Analysis. Topics covered are: ALARA exposures; radiation sources; radiation protection; dose assessment; and health physics program. All six parts and appendices A and B for section 13 (Conduct of Operations) of the ADM Design and Analysis are also contained in this volume. Topics covered are: organizational structure; training program; emergency planning; review and audit; plant procedures; industrial security; sabotage protection (App 13A); and vital equipment list (App 13B)

  18. The System 80+ Standard Plant design control document. Volume 24

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains sections 7--11 of the ADM Emergency Operations Guidelines. Topics covered are: excess steam demand recovery; loss of all feedwater; loss of offsite power; station blackout recovery; and functional recovery guideline. Appendix A Severe Accident Management Guidelines and Appendix B Lower Mode Operational Guidelines are also included

  19. Chapter 10. Multinational and international controls. Paper 18. Nuclear proliferation: arrangements for international control

    International Nuclear Information System (INIS)

    Rotblat, J.

    1979-01-01

    In the context of nuclear proliferation, the role of Third World countries is crucial since they constitute the great majority of nations, but only a few of them have as yet decided on their future energy programmes. Both the IAEA and the nuclear energy industries are urging them to opt for nuclear power. This is undesirable, because nuclear energy is an unsuitable energy source for most of these countries; it would create a new economic dependence on industrialized countries and would greatly increase the dangers of a nuclear war. To counteract this, measures are needed (a) to encourage Third World countries to meet their energy need from sources other than nuclear ones; (b) to reduce pressures on countries to acquire nuclear reactors; and (c) to eliminate the threat of new hegemonies to countries that already have nuclear power. To achieve this, it is proposed that two new international organizations be set up. One, a World Energy Organization (WEO), would be a specialized agency of the United Nations, with functions similar to those of WHO or FAO but with sufficient funds to make loans to individual countries which accept WEO's advice about their energy programmes. The second, an International Nuclear Fuel Agency (INFA), would be the sole authority to operate enrichment, fuel fabrication, reprocessing and waste disposal plants. Organizationally, it could be part of the IAEA, but the latter would have to separate its promotional and safeguarding activities. An amendment to the NPT would be needed to oblige all countries both nuclear and non-nuclear weapon states, equally to accept INFA controls. (author)

  20. Concept for an International Standard related to Space Weather Effects on Space Systems

    Science.gov (United States)

    Tobiska, W. Kent; Tomky, Alyssa

    There is great interest in developing an international standard related to space weather in order to specify the tools and parameters needed for space systems operations. In particular, a standard is important for satellite operators who may not be familiar with space weather. In addition, there are others who participate in space systems operations that would also benefit from such a document. For example, the developers of software systems that provide LEO satellite orbit determination, radio communication availability for scintillation events (GEO-to-ground L and UHF bands), GPS uncertainties, and the radiation environment from ground-to-space for commercial space tourism. These groups require recent historical data, current epoch specification, and forecast of space weather events into their automated or manual systems. Other examples are national government agencies that rely on space weather data provided by their organizations such as those represented in the International Space Environment Service (ISES) group of 14 national agencies. Designers, manufacturers, and launchers of space systems require real-time, operational space weather parameters that can be measured, monitored, or built into automated systems. Thus, a broad scope for the document will provide a useful international standard product to a variety of engineering and science domains. The structure of the document should contain a well-defined scope, consensus space weather terms and definitions, and internationally accepted descriptions of the main elements of space weather, its sources, and its effects upon space systems. Appendices will be useful for describing expanded material such as guidelines on how to use the standard, how to obtain specific space weather parameters, and short but detailed descriptions such as when best to use some parameters and not others; appendices provide a path for easily updating the standard since the domain of space weather is rapidly changing with new advances