Sustainable freight transport in South Africa:Domestic intermodal solutions

Directory of Open Access Journals (Sweden)

Jan H. Havenga

2011-11-01

Full Text Available Due to the rapid deregulation of freight transport in South Africa two decades ago, and low historical investment in rail (with resultant poor service delivery, an integrated alternative to road and rail competition was never developed. High national freight logistics costs, significant road infrastructure challenges and environmental impact concerns of a road-dominated freight transport market have, however, fuelled renewed interest in intermodal transport solutions. In this article, a high-level business case for domestic intermodal solutions in South Africa is presented. The results demonstrate that building three intermodal terminals to connect the three major industrial hubs (i.e. Gauteng, Durban and Cape Town through an intermodal solution could reduce transport costs (including externalities for the identified 11.5 million tons of intermodalfriendly freight flows on the Cape and Natal corridors by 42% (including externalities.

Aerodynamic drag on intermodal railcars

Science.gov (United States)

Kinghorn, Philip; Maynes, Daniel

2014-11-01

The aerodynamic drag associated with transport of commodities by rail is becoming increasingly important as the cost of diesel fuel increases. This study aims to increase the efficiency of intermodal cargo trains by reducing the aerodynamic drag on the load carrying cars. For intermodal railcars a significant amount of aerodynamic drag is a result of the large distance between loads that often occurs and the resulting pressure drag resulting from the separated flow. In the present study aerodynamic drag data have been obtained through wind tunnel testing on 1/29 scale models to understand the savings that may be realized by judicious modification to the size of the intermodal containers. The experiments were performed in the BYU low speed wind tunnel and the test track utilizes two leading locomotives followed by a set of five articulated well cars with double stacked containers. The drag on a representative mid-train car is measured using an isolated load cell balance and the wind tunnel speed is varied from 20 to 100 mph. We characterize the effect that the gap distance between the containers and the container size has on the aerodynamic drag of this representative rail car and investigate methods to reduce the gap distance.

On Transport Service Selection in Intermodal Rail/Road Distribution Networks

Directory of Open Access Journals (Sweden)

Christian Bierwirth

2012-11-01

Full Text Available Intermodal rail/road freight transport constitutes an alternative to long-haul road transport for the distribution of large volumes of goods. The paper introduces the intermodal transportation problem for the tactical planning of mode and service selection. In rail mode, shippers either book train capacity on a per-unit basis or charter block trains completely. Road mode is used for short-distance haulage to intermodal terminals and for direct shipments to customers. We analyze the competition of road and intermodal transportation with regard to freight consolidation and service cost on a model basis. The approach is applied to a distribution system of an industrial company serving customers in eastern Europe. The case study investigates the impact of transport cost and consolidation on the optimal modal split.

Architecture of Intermodal Complex

NARCIS (Netherlands)

Lee, S.; Herneoja, Aulikki; Österlund, Toni; Markkanen, Piia

This paper focuses on the conception and design of architecture as the work of producing media about buildings and other environmental artifacts. I approach
the questions regarding simplicity and complexity through "interdependence" and "intermodality." I believe the two concepts offer more

The concept of intermodal network development in Poland using multi-agent systems

Directory of Open Access Journals (Sweden)

Leszek MINDUR

2011-01-01

Full Text Available The market share and the development of intermodal haulages, they are still at a very low level. It amounts in total goods transported by rail to 2,5% - 3%. The major reason for this situation is lack of coherent method for intermodal network designing. Such method should take into consideration strong relations between transport users, transport service providers, so the micro scale, as well as the regions where they are operating, so the meta scale.The aim of this paper is to present method which makes possible elimination of existing barriers in intermodal transport. The proposed method, for the sake of relations between actors involved in intermodal transport organisation, refers to multi-agent system concept. This system assumes coordinated actions in favour of concrete problem solution with support of cooperating agents, that is, in described paper, actors connected with intermodal transport.Paper presents results of the research project N509 398536, called: „Intermodal logistics network in Poland – concept of model solutions and implementation aspects” carried out by the Institute of Logistics and Warehousing under scientific leadership of professor Leszek Mindur.

The comprehensive intermodal planning system in distributed environment

Directory of Open Access Journals (Sweden)

Olgierd Dziamski

2013-06-01

Full Text Available Background: Goods distribution by containers has opened new opportunities for them in the global supply chain network. Standardization of transportation units allow to simplify transport logistics operations and enable the integration of different types of transport. Currently, container transport is the most popular means of transport by sea, but recent studies show an increase in its popularity in land transport. In the paper presented the concept of a comprehensive intermodal planning system in a distributed environment which enables more efficient use containers in the global transport. The aim of this paper was to formulate and develop new concept of Internet Intermodal Planning System in distribution environment, supporting the common interests of the consignors and the logistic service providers by integrating the transportation modes, routing, logistics operations and scheduling in order to create intermodal transport plans. Methods: In the paper presented and discussed the new approach to the management of logistics resources used in international intermodal transport. Detailed analysis of proposed classification of variety transportation means has been carried out along with their specific properties, which may affect the time and cost of transportation. Have been presented the modular web-based distribution planning system supporting container transportation planning. Conducted the analysis of the main planning process and curried out the discussion on the effectiveness of the new web-based container transport planning system. Result and conclusions: This paper presents a new concept of the distributed container transport planning system integrating the available on the market logistics service providers with freight exchange. Specific to container planning new transport categories has been identified which simplify and facilitate the management of intermodal planning process. The paper presents a modular structure of Integrated

Mechanics of inter-modal tunneling in nonlinear waveguides

Science.gov (United States)

Jiao, Weijian; Gonella, Stefano

2018-02-01

In this article, we investigate the mechanics of nonlinearly induced inter-modal energy tunneling between flexurally-dominated and axially-dominated modes in phononic waveguides. Special attention is devoted to elucidating the role played by the coupling between axial and flexural degrees of freedom in the determination of the available mode hopping conditions and the associated mechanisms of deformation. Waveguides offer an ideal test bed to investigate the mechanics of nonlinear energy tunneling, due to the fact that they naturally feature, even at low frequencies, families of modes (flexural and axial) that are intrinsically characterized by extreme complementarity. Moreover, thanks to their geometric simplicity, their behavior can be explained by resorting to intuitive structural mechanics models that effectively capture the dichotomy and interplay between flexural and axial mechanisms. After having delineated the fundamental mechanics of flexural-to-axial hopping using the benchmark example of a homogeneous structure, we adapt the analysis to the case of periodic waveguides, in which the complex dispersive behavior due to periodicity results in additional richness of mode hopping mechanisms. We finally extend the analysis to periodic waveguides with internal resonators, in which the availability of locally-resonant bandgaps implies the possibility to activate the resonators even at relatively low frequencies, thus increasing the degree of modal complementarity that is available in the acoustic range. In this context, inter-modal tunneling provides an unprecedented mechanism to transfer conspicuous packets of energy to the resonating microstructure.

Intermodal Freight Transport on the Right Track? Environmental and economic performances and their trade-off

International Nuclear Information System (INIS)

Kim, Nam Seok

2010-01-01

This dissertation aims to evaluate environmental and economic performances of an intermodal freight transport system and to estimate the trade-off between CO2 emissions, which is presented as an indicator of environmental performance, and freight costs, which indicate the economic performance of the intermodal freight system. The truck-only system is always regarded as the counterpart of the intermodal freight system in this dissertation. To examine the environmental performance of the intermodal freight system, CO2 emissions generated from all the processes in the intermodal chain, such as pre-haulage and post-haulage, long distance haulage, and transshipment, are estimated considering different sources that generate electricity and transmission loss of electricity (Chapters 3 and 4). To examine the economic performance of the system, two approaches are considered: (1) finding the intermodal breakeven distance for which the intermodal system is more competitive than the truck-only system (Chapter 5); (2) examining the economies of scale in the intermodal network and finding the route/system choice that minimizes the total freight transportation costs (Chapter 6). Finally, this dissertation attempts to find the trade-off between CO2 emissions (representing the environmental performance) and freight transportation cost (representing the economic performance) (Chapter 7)

Cost, carbon emissions and modal shift in intermodal network design decisions

NARCIS (Netherlands)

Bouchery, Y.; Fransoo, J.C.

2014-01-01

Intermodal transportation is often presented as an efficient solution for reducing carbon emissions without compromising economic growth. In this article, we present a new intermodal network design model in which both the terminal location and the allocation between direct truck transportation and

Cost, carbon emissions and modal shift in intermodal network design decisions

NARCIS (Netherlands)

Bouchery, Y.; Fransoo, J.C.

2015-01-01

Intermodal transportation is often presented as an efficient solution for reducing carbon emissions without compromising economic growth. In this article, we present a new intermodal network design model in which both the terminal location and the allocation between direct truck transportation and

Dynamics of intermodal logistical systems on containerisation and road transportation in Durban, South Africa

Directory of Open Access Journals (Sweden)

Nerissa Govender

2014-12-01

Full Text Available The underlying port operations in Durban, South Africa, epitomise intense global competitiveness in the intermodal logistics chain. The link between containerisation and theroad transport network can falter as a result of the dynamics of the logistics system. The main objective of the study was to establish the extent of the intermodal challenges of logistical systems on containerisation to which the role of intermodal sea–road freight transportation enhances the logistical competitiveness. It further examined the intermodal relationship on containerised freight between the challenges of containerisation processes and the effects on road freight transport mode. The impact of containerisation on intermodalism, the sea–road freight transport network and the technological attributes of security-based systems and logistical tracking protocols influence the systematic movement of containers on Durban’s public roads.

Intermodal transfer of spent fuel

International Nuclear Information System (INIS)

Neuhauser, K.S.; Weiner, R.F.

1993-01-01

This paper discusses RADTRAN calculational models and parameter values for describing dose to workers during incident-free ship-to-truck transfer of spent fuel. Data obtained during observation of the offloading of research reactor spent fuel at Newport News Terminal in the Port of Hampton Roads, Virginia, are described. These data include estimates of exposure times and distances for handlers, inspectors, and other workers during offloading and overnight storage. Other workers include crane operators, scale operators, security personnel, and truck drivers. The data are compared to the default data in RADTRAN 4, and the latter are found to be conservative. The casks were loaded under IAEA supervision at their point of origin, and three separate radiological inspections of each cask were performed at the entry to the port (Hampton Roads) by the U.S. Coast Guard, the state of Virginia, and the shipping firm. As a result of the international standardization of containerized cargo handling in ports around the world, maritime shipment handling is particularly uniform. Thus, handler exposure parameters will be relatively constant for ship-truck and ship-rail transfers at ports throughout the world. Inspectors' doses are expected to vary because of jurisdictional considerations. The results of this study should be applicable to truck-to-rail transfers. (author)

European intermodal freight transport network

NARCIS (Netherlands)

Saeedi, Hamid; Wiegmans, Bart; Behdani, Behzad; Zuidwijk, Rob

2017-01-01

The analysis of market structure and concentration measures for the Intermodal Freight Transport (IFT) market is important to avoid market failure and to find the areas for policy making to promote IFT market share. This analysis can be performed for separate segments, for example, the market for

The performance of intermodal inland waterway transport : Modeling conditions influencing its competitiveness

NARCIS (Netherlands)

Wiegmans, B.; Konings, J.W.

2013-01-01

In Europe, numerous obstacles have been identified which prevent the (extensive) use of intermodal transport. A major motivation to promote intermodal transport is that its cost performance is often assumed better than road-only transport. Considering that the cost of transport services remains one

A chance-constrained stochastic approach to intermodal container routing problems.

Science.gov (United States)

Zhao, Yi; Liu, Ronghui; Zhang, Xi; Whiteing, Anthony

2018-01-01

We consider a container routing problem with stochastic time variables in a sea-rail intermodal transportation system. The problem is formulated as a binary integer chance-constrained programming model including stochastic travel times and stochastic transfer time, with the objective of minimising the expected total cost. Two chance constraints are proposed to ensure that the container service satisfies ship fulfilment and cargo on-time delivery with pre-specified probabilities. A hybrid heuristic algorithm is employed to solve the binary integer chance-constrained programming model. Two case studies are conducted to demonstrate the feasibility of the proposed model and to analyse the impact of stochastic variables and chance-constraints on the optimal solution and total cost.

Intermodal transfer of spent fuel

International Nuclear Information System (INIS)

Neuhauser, K.S.; Weiner, R.F.

1991-01-01

As a result of the international standardization of containerized cargo handling in ports around the world, maritime shipment handling is particularly uniform. Thus, handier exposure parameters will be relatively constant for ship-truck and ship-rail transfers at ports throughout the world. Inspectors' doses are expected to vary because of jurisdictional considerations. The results of this study should be applicable to truck-to-rail transfers. A study of the movement of spent fuel casks through ports, including the loading and unloading of containers from cargo vessels, afforded an opportunity to estimate the radiation doses to those individuals handling the spent fuels with doses to the public along subsequent transportation routes of the fuel. A number of states require redundant inspections and for escorts over long distances on highways; thus handlers, inspectors, escort personnel, and others who are not normally classified as radiation workers may sustain doses high enough to warrant concern about occupational safety. This paper addresses the question of radiation safety for these workers. Data were obtained during, observation of the offloading of reactor spent fuel (research reactor spent fuel, in this instance) which included estimates of exposure times and distances for handlers, inspectors and other workers during offloading and overnight storage. Exposure times and distance were also for other workers, including crane operators, scale operators, security personnel and truck drivers. RADTRAN calculational models and parameter values then facilitated estimation of the dose to workers during incident-free ship-to-truck transfer of spent fuel

Intermodal transport and distribution patterns in ports relationship to hinterland

Science.gov (United States)

Dinu, O.; Dragu, V.; Ruscă, F.; Ilie, A.; Oprea, C.

2017-08-01

It is of great importance to examine all interactions between ports, terminals, intermodal transport and logistic actors of distribution channels, as their optimization can lead to operational improvement. Proposed paper starts with a brief overview of different goods types and allocation of their logistic costs, with emphasis on storage component. Present trend is to optimize storage costs by means of port storage area buffer function, by making the best use of free storage time available, most of the ports offer. As a research methodology, starting point is to consider the cost structure of a generic intermodal transport (storage, handling and transport costs) and to link this to intermodal distribution patterns most frequently cast-off in port relationship to hinterland. The next step is to evaluate storage costs impact on distribution pattern selection. For a given value of port free storage time, a corresponding value of total storage time in the distribution channel can be identified, in order to substantiate a distribution pattern shift. Different scenarios for transport and handling costs variation, recorded when distribution pattern shift, are integrated in order to establish the reaction of the actors involved in port related logistic and intermodal transport costs evolution is analysed in order to optimize distribution pattern selection.

Freight transport and intermodality

OpenAIRE

Barbero Mañanes, Eduardo

2010-01-01

During recent decades, there has been very substantial growth in the freight transport sector. Freight transport is increasing faster than the economy or passenger transport. Demand is increasing more rapidly than supply and is resulting in environmental and social problems. Increasing congestion, too, is affecting efficient and reliable freight distribution, and consequently having a deleterious effect on local economies. Intermodality is therefore needed to make better use of alternative mo...

Promoting intermodal freight transport through the development of dry ports in Asia: An environmental perspective

Directory of Open Access Journals (Sweden)

Shinya Hanaoka

2011-07-01

This study reviews the status of intermodal freight transport in Asia from an environmental perspective. It examines intermodal transport opportunities presented by the development of inland dry ports in hinterland locations. This paper also reviews selected case studies of dry port development in Asia. Finally, we present the lessons to be learned for the promotion of intermodal freight transport from selected Asian countries as well as the policy options available.

Logistics in Yemen: Optimal Intermodal Frieght Transportation

Directory of Open Access Journals (Sweden)

Hisham Najeeb Said AL-Shikh

2017-10-01

Full Text Available Major roads in Yemen are not paved and its population density is high in coastal areas, implementing the idea of intermodal transportation method all over the coastline will give the product industries a huge advantages, due to its attractive solutions to the poor transportation infrastructure and its extremely limited road transportation system. The transport of goods in Yemen depends heavily on road transport in the absence of rail transport and limited movement by air transport and its high cost, the private sector provides the bulk of land transport services (goods and has accompanied the performance of road transport activities in the absence of regulation and supervision. In this research paper the author intends to analyse and develop optimal intermodal freight transportation plans for product shipping in Yemen by using two modes of transport (truck, ship without any handling of the freight itself when changing modes. Using intermodal transportation is vital for the product movement and supplies when single mode alternative becomes unusable or infeasible. The author intends to use quantitative research method, plan and execute fieldwork, collecting data form freight companies (truck, ship, local factories, Ministry of Transportation, etc. Compile preliminary maps of roads condition and population density. First the author intends to visit the Ministry of Transport to closely monitor the program and objectives of the Ministry and the secret of work and projects in which it is implemented and meet with its representative for the purpose of collecting data and evidence of the difficulties it faces in order to become familiar with it Comprehensively and directly on its problems and study the possible solutions. , the author will intend to visit Aden and Hodeida ports to view the service and facilities for a better understanding of the processes and to examine the availabilities of intermodal transportation freight and collect data of sea

Value of ITS information for congestion avoidance in inter-modal transportation systems : phase II.

Science.gov (United States)

2010-03-01

Our project has four major mile-stones for the second year: : Mile-stone #1: Develop Dynamic Inter-modal Transportation Optimization Models: For : mostly air-road network and inter-modal networks significant to OHIO : MICHIGAN regions and our col...

Alternative transport network designs and their implications for intermodal transhipment technologies

OpenAIRE

Woxenius, Johan

2007-01-01

Six principles for operation of the rail part of intermodal rail freight transport systems are described: direct link, corridor, hub-and-spoke, connected hubs, static routes, and dynamic routes. The first part is a theoretical discussion of the characteristics of the transport network designs. The theory is then applied to intermodal freight transport by analysing how each transport network design affects the need for terminal performance. The discussion includes a classification of existing ...

High-energy fiber lasers at non-traditional colours, via intermodal nonlinearities

DEFF Research Database (Denmark)

Rishøj, Lars Søgaard; Chen, Y.; Steinvurzel, P.

2012-01-01

We propose exploiting intermodal four-wave mixing for energy-scalable tuneable fiber lasers, hitherto restricted to low powers, constrained by dispersion-tailoring limitations in PCFs. Conversion over an octave, at mJ-energy-levels, appears feasible.......We propose exploiting intermodal four-wave mixing for energy-scalable tuneable fiber lasers, hitherto restricted to low powers, constrained by dispersion-tailoring limitations in PCFs. Conversion over an octave, at mJ-energy-levels, appears feasible....

Analyzing competition in intermodal freight transport networks

NARCIS (Netherlands)

Saeedi, Hamid; Wiegmans, Bart; Behdani, Behzad; Zuidwijk, Rob

2017-01-01

To cope with an intense and competitive environment, intermodal freight transport operators have increasingly adopted business practices —like horizontal and vertical business integration—which aim to reduce the operational costs, increase the profit margins, and improve their competitive position

A Simulation Platform for Combined Rail/Road Transport in Multiyards Intermodal Terminals

OpenAIRE

Chen, Xuchao; He, Shiwei; Li, Tingting; Li, Yubin

2018-01-01

With the rapid development of multiyards railway intermodal terminal (MYRIT) construction in China, performance evaluation has become an important issue for terminal design and management departments. Due to the complexity of the multiyards terminal and the associated rail network, the train moving process and related terminal operations have become more complicated compared with the traditional intermodal container terminal. However, in general simulation platforms, the train moving process ...

75 FR 14245 - Voluntary Intermodal Sealift Agreement

Science.gov (United States)

2010-03-24

... measures so that Contingency planning information can be shared with Participants to enable them to plan... Intermodal Sealift Agreement (VISA) Table of Contents Abbreviations Definitions Preface I. Purpose II... of VISA Contingency Provisions A. General B. Notification of Activation C. Voluntary Capacity D...

Implications of system usability on intermodal facility design.

Science.gov (United States)

2010-08-01

Ensuring good design of intermodal transportation facilities is critical for effective and : satisfactory operation. Passenger use of the facilities is often hindered by inadequate space, a poor : layout, or lack of signage. This project aims to impr...

Railroad Terminals and Stations - INTERMODAL_TERMINAL_NTAD_IN: Intermodal Terminal Facilities in Indiana (Bureau of Transportation Statistics, 1:100,000 Point Shapefile)

Data.gov (United States)

NSGIC State | GIS Inventory — BTS metadata states – “The Intermodal Terminal Facilities data set contains geographic data for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) highway...

Vulnerability effects of passengers' intermodal transfer distance preference and subway expansion on complementary urban public transportation systems

International Nuclear Information System (INIS)

Hong, Liu; Yan, Yongze; Ouyang, Min; Tian, Hui; He, Xiaozheng

2017-01-01

The vulnerability studies on urban public transportation systems have attracted growing attentions in recent years, due to their important role in the economy development of a city and the well-beings of its citizens. This paper proposes a vulnerability model of complementary urban public transportation systems (CUPTSs) composed of bus systems and subway systems, with the consideration of passengers’ intermodal transfer distance preference (PITDP) to capture different levels of complementary strength between the two systems. Based on the model, this paper further introduces a CUPTSs-aimed vulnerability analysis method from two specific aspects: (a) vulnerability effects of different PITDP values, which facilitate the design of policies to change PITDP to reduce system vulnerability; (b) vulnerability effects of different subway expansion plans, which facilitate the vulnerability investigation of current expansion plan and the identification of the optimal expansion plan from the system vulnerability perspective. The proposed CUPTSs-aimed vulnerability analysis method is applied to investigate the complementary bus and subway systems in the city of Wuhan, China. The insights from this study are helpful to analyze other CUPTSs for valuable planning suggestions from the vulnerability perspective. - Highlights: • We model complementary urban public transportation systems’ (CUPTSs) vulnerability. • We use a PITDP metric to capture different levels of complementary relationship. • We study vulnerability under different PITDP and different subway expansion plans. • We analyze dynamic vulnerability of CUPTSs during their expansion process.

STUDY OF THE EXPERIENCE OF USE OF INTERMODAL TECHNOLOGY IN THE ORGANIZATION OF PASSENGER TRANSPORTATIONS

Directory of Open Access Journals (Sweden)

Liudmila Andreevna Paramonova

2017-05-01

Full Text Available This article examines the practice of applying intermodal technology and a single transportation document in the organization of passenger transportations, contains a review of the projects on the use of intermodal technology from theoretical point of view, an analysis of the implemented models.

Surveillance systems for intermodal transportation

Science.gov (United States)

Jakovlev, Sergej; Voznak, Miroslav; Andziulis, Arunas

2015-05-01

Intermodal container monitoring is considered a major security issue in many major logistic companies and countries worldwide. Current representation of the problem, we face today, originated in 2002, right after the 9/11 attacks. Then, a new worldwide Container Security Initiative (CSI, 2002) was considered that shaped the perception of the transportation operations. Now more than 80 larger ports all over the world contribute to its further development and integration into everyday transportation operations and improve the regulations for the developing regions. Although, these new improvements allow us to feel safer and secure, constant management of transportation operations has become a very difficult problem for conventional data analysis methods and information systems. The paper deals with a proposal of a whole new concept for the improvement of the Containers Security Initiative (CSI) by virtually connecting safety, security processes and systems. A conceptual middleware approach with deployable intelligent agent modules is proposed to be used with possible scenarios and a testbed is used to test the solution. Middleware examples are visually programmed using National Instruments LabView software packages and Wireless sensor network hardware modules. An experimental software is used to evaluate he solution. This research is a contribution to the intermodal transportation and is intended to be used as a means or the development of intelligent transport systems.

Hub exchange operations in intermodal hub-and spoke networks: A performance comparison of rail-rail exchange facilities

OpenAIRE

Bontekoning, Y.M.

2006-01-01

The implementation of hub-and-spoke networks in intermodal transport is suggested as one of the potential solutions for helping to increase the intermodal market share. Traditionally, trains are shunted at hubs; this is a time-consuming process. Since the early 1990s a new type of intermodal terminal, specifically designed for fast tran-shipment at nodes in hub-and-spoke networks, has been introduced in Europe. These hub terminals could replace this time-consuming shunting. Studies on the new...

Study of inter-modal four wave mixing in two few-mode fibres with different phase matching properties

DEFF Research Database (Denmark)

Parmigiani, F.; Jung, Y.; Friis, Søren Michael Mørk

2016-01-01

We experimentally study inter-modal four-wave mixing (FWM) in few-mode fibres with different phase matching properties. The possibility of transmitting two spatial modes without intermodal FWM cross-talk in the C-band is presented....

Detailed phase matching characterization of inter-modal four-wave mixing in a two-mode fiber

DEFF Research Database (Denmark)

Friis, Søren Michael Mørk; Jung, Y.; Begleris, I.

2016-01-01

We experimentally characterize the phase matching properties of two inter-modal four-wave mixing processes in a graded index fiber guiding the LP01 and LP11 mode-groups.......We experimentally characterize the phase matching properties of two inter-modal four-wave mixing processes in a graded index fiber guiding the LP01 and LP11 mode-groups....

Quality management in intermodal terminals of the Brazilian grains logistics chain

Directory of Open Access Journals (Sweden)

Caroline Foscaches

2016-09-01

Full Text Available Intermodal terminals play a key role in the logistics system, since they are an important link between food production and distribution. In the agrifood chain, quality management isn´t seen as a competitive advantage, but as an issue of survival. This study thus aims to identify the quality management phase in which the intermodal terminals of the Brazilian grains logistics chain are found. To this end, interviews were conducted, using semi-structured questionnaires, with the managers of 28 intermodal terminals located in the Midwest, South, Southeast, Northeast and Northern regions. It was found that most terminals are in the Strategic Quality Management era, the fourth era of quality management. In addition, it was observed that the specific tools of the agrifood sector are widely used by terminals. In addition, many terminals use tools from the first and second quality era. Among the tools of the fourth era, product tracking is the most widely used. Finally, it was possible to determine that the terminals in the third quality era, Quality Assurance, have a higher average operating efficiency than terminals in the fourth era, Strategic Quality Management.

An intermodal transportation geospatial network modeling for containerized soybean shipping

Directory of Open Access Journals (Sweden)

Xiang Liu

2017-06-01

Full Text Available Containerized shipping is a growing market for agricultural exports, particularly soybeans. In order to understand the optimal strategies for improving the United States’ economic competitiveness in this emerging market, this research develops an intermodal transportation network modeling framework, focusing on U.S. soybean container shipments. Built upon detailed modal cost analyses, a Geospatial Intermodal Freight Transportation (GIFT model has been developed to understand the optimal network design for U.S. soybean exports. Based on market demand and domestic supply figures, the model is able to determine which domestically produced soybeans should go to which foreign markets, and by which transport modes. This research and its continual studies, will provide insights into future policies and practices that can improve the transportation efficiency of soybean logistics.

Experimental generation of discrete ultraviolet wavelength by cascaded intermodal four-wave mixing in a multimode photonic crystal fiber.

Science.gov (United States)

Yuan, Jinhui; Kang, Zhe; Li, Feng; Zhang, Xianting; Mei, Chao; Zhou, Guiyao; Sang, Xinzhu; Wu, Qiang; Yan, Binbin; Zhou, Xian; Zhong, Kangping; Wang, Kuiru; Yu, Chongxiu; Farrell, Gerald; Lu, Chao; Tam, Hwa Yaw; Wai, P K A

2017-09-15

In this Letter, we demonstrate experimentally for the first time, to the best of our knowledge, discrete ultraviolet (UV) wavelength generation by cascaded intermodal FWM when femtosecond pump pulses at 800 nm are launched into the deeply normal dispersion region of the fundamental guided mode of a multimode photonic crystal fiber (MPCF). For pump pulses at average input powers of P av =450, 550, and 650 mW, the first anti-Stokes waves are generated at the visible wavelength of 538.1 nm through intermodal phase matching between the fundamental and second-order guided mode of the MPCF. The first anti-Stokes waves generated then serve as the secondary pump for the next intermodal FWM process. The second anti-Stokes waves in the form of the third-order guided mode are generated at the UV wavelength of 375.8 nm. The maximum output power is above 10 mW for P av =650  mW. We also confirm that the influences of fiber bending and intermodal walk-offs on the cascaded intermodal FWM-based frequency conversion process are negligible.

An Efficient Genetic Algorithm to Solve the Intermodal Terminal Location problem

Directory of Open Access Journals (Sweden)

Mustapha Oudani

2014-11-01

Full Text Available The exponential growth of the flow of goods and passengers, fragility of certain products and the need for the optimization of transport costs impose on carriers to use more and more multimodal transport. In addition, the need for intermodal transport policy has been strongly driven by environmental concerns and to benefit from the combination of different modes of transport to cope with the increased economic competition. This research is mainly concerned with the Intermodal Terminal Location Problem introduced recently in scientific literature which consists to determine a set of potential sites to open and how to route requests to a set of customers through the network while minimizing the total cost of transportation. We begin by presenting a description of the problem. Then, we present a mathematical formulation of the problem and discuss the sense of its constraints. The objective function to minimize is the sum of road costs and railroad combined transportation costs. As the Intermodal Terminal Location Problemproblem is NP-hard, we propose an efficient real coded genetic algorithm for solving the problem. Our solutions are compared to CPLEX and also to the heuristics reported in the literature. Numerical results show that our approach outperforms the other approaches.

The importance of inter-modal transport system in Nigeria with ...

African Journals Online (AJOL)

The importance of inter-modal transport system in Nigeria with reference to the Asaba-Onitsha transport corridor since the pre-colonial period. ... EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

The Malaysian Intermodal Terminal System: The Implication on the Malaysian Maritime Cluster

Directory of Open Access Journals (Sweden)

Mohamad Rosni Othman

2016-06-01

Full Text Available The maritime sector in Malaysia is best known globally due to the Straits of Malacca and being a nation surrounded by sea. Malaysia also has a substantial maritime industry consisting of numerous shipyards, ports and terminal faculties, ship services and a plethora of other companies and institutions with maritime oriented activities and become essential components of the Malaysia's maritime clusters. Issues such as underutilised intermodal terminals, uneven proportions in the freight transport infrastructure and road and seaport congestions prevent Malaysian seaports from achieving their full potential in serving their respective hinterlands. The key factors to improve Malaysian dry port or intermodal terminals are transport network; container planning; competition; location and, externalities. The paper does not only present the critical challenges faced by Malaysian intermodal terminals especially dry ports and the implications for seaport competency but it also provides strategies to utilise the Malaysian freight multimodal system to amplify seaports
tm performance in serving their hinterlands. As such, this may warrant policy makers to devise a comprehensive national master plan for the maritime sector in order for Malaysia to further develop her maritime industry and economies.

How Uncertain Information on Service Capacity Influences the Intermodal Routing Decision: A Fuzzy Programming Perspective

Directory of Open Access Journals (Sweden)

Yan Sun

2018-01-01

Full Text Available Capacity uncertainty is a common issue in the transportation planning field. However, few studies discuss the intermodal routing problem with service capacity uncertainty. Based on our previous study on the intermodal routing under deterministic capacity consideration, we systematically explore how service capacity uncertainty influences the intermodal routing decision. First of all, we adopt trapezoidal fuzzy numbers to describe the uncertain information of the service capacity, and further transform the deterministic capacity constraint into a fuzzy chance constraint based on fuzzy credibility measure. We then integrate such fuzzy chance constraint into the mixed-integer linear programming (MILP model proposed in our previous study to develop a fuzzy chance-constrained programming model. To enable the improved model to be effectively programmed in the standard mathematical programming software and solved by exact solution algorithms, a crisp equivalent linear reformulation of the fuzzy chance constraint is generated. Finally, we modify the empirical case presented in our previous study by replacing the deterministic service capacities with trapezoidal fuzzy ones. Using the modified empirical case, we utilize sensitivity analysis and fuzzy simulation to analyze the influence of service capacity uncertainty on the intermodal routing decision, and summarize some interesting insights that are helpful for decision makers.

Terminal location planning in intermodal transportation with Bayesian inference method.

Science.gov (United States)

2014-01-01

In this project, we consider the planning of terminal locations for intermodal transportation systems. For a given number of potential terminals and coexisted multiple service pairs, we find the set of appropriate terminals and their locations that p...

Intermodal Matching on the Example of Sound and Color Connection in Norm and Pathology

Directory of Open Access Journals (Sweden)

Dyachenko A.

2017-05-01

Full Text Available The article describes the initial period of research of synesthesia and further work, experimental and theoretical, related to the study of various intermodal correspondences. Information about the presence of a statistically significant phenomenon of various intermodal correspondences in healthy people (which includes for example the connection of sound and color is provided. Present experiment reveals that the phenomenon of sound-color correspondences undergoes destructive changes in patients with schizophrenia compared with that in healthy individuals, but does not detect new distinct patterns.

Intermode traces - fundamental interference phenomenon in quantum and wave physics

NARCIS (Netherlands)

Kaplan, A.E.; Stifter, P.; Leeuwen, van K.A.H.; Lamb, W.E.; Schleich, W.P.

1998-01-01

Highly regular spatio-temporal or multi-dimensional patterns in the quantum mechanical probability or classical field intensity distributions can appear due to pair interference between individual eigen-modes of the system forming the so called intermode traces. These patterns are strongly

Intermodal parametric gain of degenerate four wave mixing in large mode area hybrid photonic crystal fibers

DEFF Research Database (Denmark)

Petersen, Sidsel Rübner; Lægsgaard, Jesper; Alkeskjold, Thomas Tanggaard

2013-01-01

Intermodal degenerate four wave mixing (FWM) is investigated numerically in large mode area hybrid photonic crystal fibers. The dispersion is controlled independently of core size, and thus allows for power scaling of the FWM process.......Intermodal degenerate four wave mixing (FWM) is investigated numerically in large mode area hybrid photonic crystal fibers. The dispersion is controlled independently of core size, and thus allows for power scaling of the FWM process....

Arrangements of intermodal transport in the field of conflicting conventions

NARCIS (Netherlands)

K.F. Haak (Krijn); M.A.I.H. Hoeks (Marian)

2004-01-01

textabstractThe continuing advance of containerization emphasizes the need for a more uniform legal approach to international intermodal transport. With the current lack of a uniform instrument regulating such transport, the next best solution - both in legal theory as well as in practice - seems to

The potential of intermodal transport projects in Romania

Directory of Open Access Journals (Sweden)

Tudorica Alexandra

2017-07-01

Full Text Available The transport infrastructure sector is facing challenges related to the decarbonisation, financing and integrated developments, which need to be overcome so it can gain a competitive advantage among the strategic economic sectors. Known as a major pollutant, with 23.3 % of the total EU-28 GHG emissions in 2014, one of the transport policy objectives is to lower this percentage, by focusing on innovative solutions and modal shift (Eurostat, 2016. The White Paper (2011 promotes a sustainable development, aiming at a reduction by 60% by 2050 of the carbon emissions generated by the transport sector and at a modal shift from road to rail or waterborne transport for freight transport over 300 km with 30% by 2030, and more than 50% by 2050. The focus on an integrated development of the transport sector at the European level was reinforced with the adoption of the EU Regulation no. 1315/2013, marking the transition from a patchwork of different projects towards a vision for the achievement of an EU transport network. Moreover, another challenge is related to the scarce availability of the public money, making it necessary to attract private parties in the development of the transport infrastructure projects (The Investment Plan for Europe, 2014. Supporting the development of the intermodal transport is a way of surmounting the obstacles that this sector is confronting with, which is being implemented in Europe. The intermodal transport is introducing a paradigm shift, allowing the integration of the different transport modes together with their own advantages, as opposed to competing stand-alone modes and it can aid in the fight against climate change, scarce financial resources and congestion This article aims at determining the potential of Romania, as a member of European Union, to develop intermodal transport projects, to identify the funding sources, the obstacles and the solutions to promote the successful implementation of such projects.

Quantitative research regarding performance measures for intermodal freight transportation : executive summary

Science.gov (United States)

1995-10-01

The primary objective of this study is to provide information relative to the development of a set of performance measures for intermodal freight transportation. To accomplish this objective, data was collected, processed, and analyzed on the basis o...

Intermode Breather Solitons in Optical Microresonators

Science.gov (United States)

Guo, Hairun; Lucas, Erwan; Pfeiffer, Martin H. P.; Karpov, Maxim; Anderson, Miles; Liu, Junqiu; Geiselmann, Michael; Jost, John D.; Kippenberg, Tobias J.

2017-10-01

Dissipative solitons can be found in a variety of systems resulting from the double balance between dispersion and nonlinearity, as well as gain and loss. Recently, they have been observed to spontaneously form in Kerr nonlinear microresonators driven by a continuous wave laser, providing a compact source of coherent optical frequency combs. As optical microresonators are commonly multimode, intermode interactions, which give rise to avoided mode crossings, frequently occur and can alter the soliton properties. Recent works have shown that avoided mode crossings cause the soliton to acquire a single-mode dispersive wave, a recoil in the spectrum, or lead to soliton decay. Here, we show that avoided mode crossings can also trigger the formation of breather solitons, solitons that undergo a periodic evolution in their amplitude and duration. This new breather soliton, referred to as an intermode breather soliton, occurs within a laser detuning range where conventionally stationary (i.e., stable) dissipative Kerr solitons are expected. We experimentally demonstrate the phenomenon in two microresonator platforms (crystalline magnesium fluoride and photonic chip-based silicon nitride microresonators) and theoretically describe the dynamics based on a pair of coupled Lugiato-Lefever equations. We show that the breathing is associated with a periodic energy exchange between the soliton and a second optical mode family, a behavior that can be modeled by a response function acting on dissipative solitons described by the Lugiato-Lefever model. The observation of breathing dynamics in the conventionally stable soliton regime is relevant to applications in metrology such as low-noise microwave generation, frequency synthesis, or spectroscopy.

The Joint Modular Intermodal Container, is this the Future of Naval Logistics?

National Research Council Canada - National Science Library

Johnson, Mark E

2005-01-01

.... One mission area that is prime for manpower reduction is naval logistics. JMIC, the Joint Military Intermodal Container is a combined Naval Sea Systems Command/ Office of the Chief of Naval Operations (NAVSEA/OPNAV...

Intermodal container transport logistics to andfrom Malaysian ports : Evaluation of Customer requirements and environmental eff‡ects

OpenAIRE

Nasir, Sharin

2014-01-01

Malaysian ports’ container volumes are expected to increase to 36.6 million TEUs in 2020 compare to 12 million TEUs in 2005. Almost 45% of the container volumes are local containers entering the Malaysian hinterland. The hinterland container transport movements are dominated by road haulage (90%), alongside road-rail intermodal that currently handles the remaining 10%. The aim of this research is to develop possible strategies for improving the logistics of the intermodal hinterland container...

Optimizing Intermodal Train Schedules with a Design Balanced Network Design Model

DEFF Research Database (Denmark)

Pedersen, Michael Berliner; Crainic, Teodor Gabriel

We present a modeling approach for optimizing intermodal trains schedules based on an infrastructure divided into time-dependent train paths. The formulation can be generalized to a capacitated multi commodity network design model with additional design balance constraints. We present a Tabu Search...

INTERMODAL TAŞIMACILIĞIN MALİYET AVANTAJLARI: KARAYOLU-DENİZYOLU ENTEGRASYONU ÜZERİNE BİR ARAŞTIRMA - COST BENEFITS OF INTERMODAL TRANSPORTATION: A RESEARCH ON ROAD AND MARITIME INTEGRATION

Directory of Open Access Journals (Sweden)

Mehmet Sıtkı SAYGILI

2014-03-01

Full Text Available ÖzetDünya üzerinde uluslararası ticaret her geçen gün gelişmektedir. Küresel pazarlardaki yoğun rekabet ortamında işletmeler kar marjlarını arttırmak için ticari bakış açılarında ve yöntemlerinde değişiklikler yapmaktadır. Toplam maliyetlerin düşürülmesi ve zaman faktörü açısından, günümüzde üreticiler tarafından lojistik hizmetlerin önemi daha iyi anlaşılmaktadır. Bu doğrultuda üreticilerin talepleri lojistik işletmelerinin operasyonlarına da etki etmektedir.Lojistik işletmelerinin müşterilerine rekabet avantajı oluşturacak bir taşıma fiyatı sunabilmesi için finansal durumlarını analiz etmeleri ve maliyetlerini kontrol altında tutmaları gerekmektedir. Taşıma maliyetlerinin düşürülmesi ile birlikte çevreye verilen zararın azaltılması için tüm taşıma türlerinin üstün yönlerinden yararlanarak birden fazla taşıma türünü bir araya getiren intermodal taşıma sistemi önem kazanmaktadır.Bu araştırma kapsamında öncelikle intermodal taşımacılıkla ilgili temel konular açıklanarak, taşıma türlerinin entegrasyonunda etkili olan etmeler ortaya konulmaktadır. Lojistik işletmelerinin maliyet yönetimi hakkında bilgi verilmektedir. Intermodal taşımacılıkta taşıma maliyetlerinin analizine yönelik karayolu taşımacılığına alternatif olarak karayolu-denizyolu entegrasyonu üzerine güzergah maliyetlerinin karşılaştırılması açısından örnek bir uygulama yapılmaktadır.AbstractInternational trade globally develops day by day. In highly competitive global markets, companies make changes in their trading perspectives and methods in order to increase their profit margin. Currently, suppliers recognize the importance of logistics services better in terms of diminishing total costs and time factor. In this sense, demands of suppliers also influence operations of logistics companies.Logistics companies are supposed to analyze their financial

INTERMODAL TAŞIMACILIĞIN MALİYET AVANTAJLARI: KARAYOLU-DENİZYOLU ENTEGRASYONU ÜZERİNE BİR ARAŞTIRMA - COST BENEFITS OF INTERMODAL TRANSPORTATION: A RESEARCH ON ROAD AND MARITIME INTEGRATION

Directory of Open Access Journals (Sweden)

Mehmet Sıtkı SAYGILI

2014-01-01

Full Text Available ÖzetDünya üzerinde uluslararası ticaret her geçen gün gelişmektedir. Küresel pazarlardaki yoğun rekabet ortamında işletmeler kar marjlarını arttırmak için ticari bakış açılarında ve yöntemlerinde değişiklikler yapmaktadır. Toplam maliyetlerin düşürülmesi ve zaman faktörü açısından, günümüzde üreticiler tarafından lojistik hizmetlerin önemi daha iyi anlaşılmaktadır. Bu doğrultuda üreticilerin talepleri lojistik işletmelerinin operasyonlarına da etki etmektedir.Lojistik işletmelerinin müşterilerine rekabet avantajı oluşturacak bir taşıma fiyatı sunabilmesi için finansal durumlarını analiz etmeleri ve maliyetlerini kontrol altında tutmaları gerekmektedir. Taşıma maliyetlerinin düşürülmesi ile birlikte çevreye verilen zararın azaltılması için tüm taşıma türlerinin üstün yönlerinden yararlanarak birden fazla taşıma türünü bir araya getiren intermodal taşıma sistemi önem kazanmaktadır.Bu araştırma kapsamında öncelikle intermodal taşımacılıkla ilgili temel konular açıklanarak, taşıma türlerinin entegrasyonunda etkili olan etmeler ortaya konulmaktadır. Lojistik işletmelerinin maliyet yönetimi hakkında bilgi verilmektedir. Intermodal taşımacılıkta taşıma maliyetlerinin analizine yönelik karayolu taşımacılığına alternatif olarak karayolu-denizyolu entegrasyonu üzerine güzergah maliyetlerinin karşılaştırılması açısından örnek bir uygulama yapılmaktadır.AbstractInternational trade globally develops day by day. In highly competitive global markets, companies make changes in their trading perspectives and methods in order to increase their profit margin. Currently, suppliers recognize the importance of logistics services better in terms of diminishing total costs and time factor. In this sense, demands of suppliers also influence operations of logistics companies.Logistics companies are supposed to analyze their financial

Impact of intermodal facilities to the design of supply chains for biorefineries.

Science.gov (United States)

2009-08-15

This paper analyzes the impact that an intermodal facility has on location and transportation decisions for biofuel production plants. Location decisions impact the management of the in-bound and out-bound logistics of a plant. We model this supply c...

Intramodality and intermodality agreement in radiography and computed tomography of equine distal limb fractures.

Science.gov (United States)

Crijns, C P; Martens, A; Bergman, H-J; van der Veen, H; Duchateau, L; van Bree, H J J; Gielen, I M V L

2014-01-01

Computed tomography (CT) is increasingly accessible in equine referral hospitals. To document the level of agreement within and between radiography and CT in characterising equine distal limb fractures. Retrospective descriptive study. Images from horses that underwent radiographic and CT evaluation for suspected distal limb fractures were reviewed, including 27 horses and 3 negative controls. Using Cohen's kappa and weighted kappa analysis, the level of agreement among 4 observers for a predefined set of diagnostic characteristics for radiography and CT separately and for the level of agreement between the 2 imaging modalities were documented. Both CT and radiography had very good intramodality agreement in identifying fractures, but intermodality agreement was lower. There was good intermodality and intramodality agreement for anatomical localisation and the identification of fracture displacement. Agreement for articular involvement, fracture comminution and fracture fragment number was towards the lower limit of good agreement. There was poor to fair intermodality agreement regarding fracture orientation, fracture width and coalescing cracks; intramodality agreement was higher for CT than for radiography for these features. Further studies, including comparisons with surgical and/or post mortem findings, are required to determine the sensitivity and specificity of CT and radiography in the diagnosis and characterisation of equine distal limb fractures. © 2013 EVJ Ltd.

Feasibility of using cellular telephone data to determine the truckshed of intermodal facilities.

Science.gov (United States)

2010-03-01

In order to determine the feasibility of using cellular telephone location data in deriving the geographic extent : (truckshed) from intermodal facilities, this study was conducted to determine the feasibility analysis in three aspects: : technology,...

Harvesting vibrational energy due to intermodal systems via nano coated piezo electric devices.

Science.gov (United States)

2015-12-01

Vibrational energy resulting from intermodal transport systems can be recovered through the use of energy harvesting system consisting of PZT piezo electric material as the primary energy harvesting component. The ability of traditional PZT piezo ele...

Auditory-Visual Intermodal Matching of Small Numerosities in 6-Month-Old Infants

Science.gov (United States)

Kobayashi, Tessei; Hiraki, Kazuo; Hasegawa, Toshikazu

2005-01-01

Recent studies have reported that preverbal infants are able to discriminate between numerosities of sets presented within a particular modality. There is still debate, however, over whether they are able to perform intermodal numerosity matching, i.e. to relate numerosities of sets presented with different sensory modalities. The present study…

Imaging of Herniated Discs of the Cervical Spine: Inter-Modality Differences between 64-Slice Multidetector CT and 1.5-T MRI

Energy Technology Data Exchange (ETDEWEB)

Yi, Ji Sook; Cha, Jang Gyu [Dept. of Radiology, Soonchunhyang University Bucheon Hospital, Bucheon (Korea, Republic of); Han, Jong Kyu [Dept. of Radiology, Soonchunhyang University Cheonan Hospital, Cheonan (Korea, Republic of); Kim, Hyun Joo [Dept. of Radiology, Soonchunhyang University Seoul Hospital, Seoul (Korea, Republic of)

2015-08-15

To assess inter-modality variability when evaluating cervical intervertebral disc herniation using 64-slice multidetector-row computed tomography (MDCT) and magnetic resonance imaging (MRI). Three musculoskeletal radiologists independently reviewed cervical spine 1.5-T MRI and 64-slice MDCT data on C2-3 though C6-7 of 51 patients in the context of intervertebral disc herniation. Interobserver and inter-modality agreements were expressed as unweighted kappa values. Weighted kappa statistics were used to assess the extents of agreement in terms of the number of involved segments (NIS) in disc herniation and epicenter measurements collected using MDCT and MRI. The interobserver agreement rates upon evaluation of disc morphology by the three radiologists were in fair to moderate agreement (k = 0.39-0.53 for MDCT images; k = 0.45-0.56 for MRIs). When the disc morphology was categorized into two and four grades, the inter-modality agreement rates were moderate (k-value, 0.59) and substantial (k-value, 0.66), respectively. The inter-modality agreements for evaluations of the NIS (k-value, 0.78) and the epicenter (k-value, 0.79) were substantial. Also, the interobserver agreements for the NIS (CT; k-value, 0.85 and MRI; k-value, 0.88) and epicenter (CT; k-value, 0.74 and MRI; k-value, 0.70) evaluations by two readers were substantial. MDCT tended to underestimate the extent of herniated disc lesions compared with MRI. Multidetector-row computed tomography and MRI showed a moderate-to-substantial degree of inter-modality agreement for the assessment of herniated cervical discs. MDCT images have a tendency to underestimate the anterior/posterior extent of the herniated disc compared with MRI.

Superthin resonator dye laser with THz intermode frequency separation

International Nuclear Information System (INIS)

Rudych, P D; Surovtsev, N V

2014-01-01

Two-color laser irradiation is considered an effective way to pump THz excitations for numerous scientific and applied goals. We present a design for convenient laser source with THz intermode frequency separation. The setup is based on dye laser with superthin resonator pumped by a subnanosecond pulse laser. It was proven that the superthin resonator dye laser is useful, possesses high stability and high energy conversion, and generates narrow laser modes. The ability of this laser to pump CARS processes for THz vibrations is demonstrated. (letter)

Updating and improving methodology for prioritizing highway project locations on the strategic intermodal system (SIS).

Science.gov (United States)

2016-04-01

The Florida Department of Transportation (FDOT) District One developed the Congestion Management Process : (CMP) system to prioritize low-cost, near-term highway improvements on the Strategic Intermodal System (SIS). : The existing CMP system is desi...

Primena SWOT analize na sistem integralnog transporta Vojske Srbije / SWOT analysis of the intermodal transportation system in the Army of Serbia

Directory of Open Access Journals (Sweden)

Dragan S. Pamučar

2008-04-01

Full Text Available U radu je prikazana primena SWOT analize na sistem integralnog transporta Vojske Srbije. Kao rezultat analize predstavljeni su ciljevi daljeg usavršavanja integralnog transporta, kao i mogući problemi generisani strateškim upravljanjem. / This work presents the SWOT analysis application to the intermodal transportation system in the Army of Serbia. The analysis resulted in defining goals for the future development of intermodal transportation, as well as possible problems generated by strategic management.

Analyzing the impact of intermodal facilities to the design and management of biofuels supply chain.

Science.gov (United States)

2010-01-01

This paper analyzes the impact that an intermodal facility has on location and transportation : decisions for biofuel production plants. Location decisions impact the management of the in-bound and out-bound logistics of a plant. We model this supply...

The coastal transportation in Brazil - potential for the improvement of aiming intermodality logistic flow

Directory of Open Access Journals (Sweden)

Delmo Alves Moura

2011-06-01

Full Text Available This study describes aspects related to coastal shipping in Brazil and its main actors and intermodal factors (road, rail, fluvial transportation etc. which corroborate to the increase of logistics competitiveness and efficiency of transportation in a large country like Brazil. The purpose of the study is bibliographic research on the topic, analyzing it inside the Brazilian scenario and also how it has been implemented in some countries. The objective of the study is also analyzing legislation which defines parameters to coastal shipping. This fact interferes directly with the logistics system and its intermodal aspects. If Brazil intends to reduce its logistics costs, coastal shipping should be an effective way to contribute to the Brazilian matrix of transport. Coastal shipping is supposed to bring competitive advantage and reduction of logistic costs. The conclusion is that integration is essential among the systems of domestic transportation and coastal shipping with its outstanding role in this environment, can contribute substantially to the Brazilian maritime industry.

EEG investigations of duration discrimination: the intermodal effect is induced by an attentional bias.

Directory of Open Access Journals (Sweden)

Emilie Gontier

Full Text Available Previous studies indicated that empty time intervals are better discriminated in the auditory than in the visual modality, and when delimited by signals delivered from the same (intramodal intervals rather than from different sensory modalities (intermodal intervals. The present electrophysiological study was conducted to determine the mechanisms which modulated the performances in inter- and intramodal conditions. Participants were asked to categorise as short or long empty intervals marked by auditory (A and/or visual (V signals (intramodal intervals: AA, VV; intermodal intervals: AV, VA. Behavioural data revealed that the performances were higher for the AA intervals than for the three other intervals and lower for inter- compared to intramodal intervals. Electrophysiological results indicated that the CNV amplitude recorded at fronto-central electrodes increased significantly until the end of the presentation of the long intervals in the AA conditions, while no significant change in the time course of this component was observed for the other three modalities of presentation. They also indicated that the N1 and P2 amplitudes recorded after the presentation of the signals which delimited the beginning of the intervals were higher for the inter- (AV/VA compared to the intramodal intervals (AA/VV. The time course of the CNV revealed that the high performances observed with AA intervals would be related to the effectiveness of the neural mechanisms underlying the processing of the ongoing interval. The greater amplitude of the N1 and P2 components during the intermodal intervals suggests that the weak performances observed in these conditions would be caused by an attentional bias induced by the cognitive load and the necessity to switch between modalities.

The Cargo Fare Class Mix problem for an intermodal corridor: revenue management in synchromodal container transportation

NARCIS (Netherlands)

B. van Riessen (Bart); R.R. Negenborn (Rudy); R. Dekker (Rommert)

2017-01-01

textabstractThe intermodal hinterland transportation of maritime containers is under pressure from port authorities and shippers to achieve a more integrated, efficient network operation. Current optimisation methods in literature yield limited results in practice, though, as the transportation

The Cargo Fare Class Mix problem for an intermodal corridor : revenue management in synchromodal container transportation

NARCIS (Netherlands)

van Riessen, B.; Negenborn, R.R.; Dekker, Rommert

2017-01-01

The intermodal hinterland transportation of maritime containers is under pressure from port authorities and shippers to achieve a more integrated, efficient network operation. Current optimisation methods in literature yield limited results in practice, though, as the transportation product

Coopetition in Intermodal Freight Transport Services

Directory of Open Access Journals (Sweden)

Jian Liu

2015-01-01

Full Text Available The paper studies the coopetition of the downstream different carriers by providing complementary transport services in intermodal freight transport chain. Considering different information structure, a two-stage dynamic game model with simultaneous actions on investment and price is first formulated. Equilibria show both parties have motivation to select coopetition even if the agreement for cooperation investment is reached in advance. When both firms agree on the specific allocation, the new coopetition with higher efficiency would be emerged. Moreover, we analyze the complexity and evolution of coopetition by repeated pricing game with finitely and infinitely time horizon. In the finitely repeated pricing game, both firms have incentive to reach a tacit understanding to alternate choosing price cooperation and competition after setting suitable allocation scheme; the repeated periods t are then going to be an issue. In the infinitely repeated pricing game, the perfect cooperation is realized by designing the suitable trigger strategy.

76 FR 32906 - Inspection, Repair, and Maintenance; Driver-Vehicle Inspection Report for Intermodal Equipment

Science.gov (United States)

2011-06-07

... Administration FMCSRs Federal Motor Carrier Safety Regulations IANA Intermodal Association of North America IEP... required to report to the IEP or the providers' designated agent any actual damage or defect in the IME of which the driver or motor carrier is aware at the time the IME is returned to the IEP or the provider's...

Perceptions of transport corridors and intermodal transport - as ways to control the space of freight transport flows

DEFF Research Database (Denmark)

Hansen, Leif Gjesing

2009-01-01

This paper presents empirical findings and results from a study conducted as a part of an INTERREG IIIB project on intermodal transport solutions and corridors in the North Sea Region (SUTRANET - Sustainable Transport Research & Development Network in the North Sea Region (Hansen et.al., 2007......; Kristiansen et.al., 2005 and http://www.sutranet.org/ ). The aim of the study has been to explore possibilities and barriers for the development of intermodal transport solutions in selected corridors in the North Sea Region. The North Sea Region is one among several regions appointed by the EU......-Commission to exemplify the operationalisation of the concept Motorways of the Sea (European Commission, 2004). The policies of promoting Motorways of the Sea is aiming at revitalise the short-sea-shipping within Europe as a transport industry, but also to relieve the heavily congested road network in central regions...

Identification of a leadership competency model for use in the development, recruitment & retention of intermodal transportation workers.

Science.gov (United States)

2010-05-01

The purpose of this research was to determine the competencies that predict highly effective : performance in intermodal transportation managers and that will pave the way for development : of a core competency model that can be used to recruit, trai...

A time-dependent vehicle routing problem in the service area of intermodal terminals

OpenAIRE

Braekers, K.; Caris, A.; Janssens, G.K.

2013-01-01

This paper deals with the operational planning of drayage operations in the service area of intermodal container terminals. Drayage operations refer to the full truckload container transpot activities that take place on a regional scale around these terminals. They involve the transport of loaded and empty containers between container terminals, container depots, consignees and shippers. Drayage operations are mostly performed by truck and constitute a large part of total costs of an intermo...

Intermodal Logistics Centres and Freight Corridors – Concepts and Trends

Directory of Open Access Journals (Sweden)

Norbert Wagener

2017-09-01

Full Text Available . Background: The development of international freight corridors, as the Trans European Network and new rail and inland shipping corridors in Asia and Africa, require efficient logistics centres along these corridors which serve as intermodal interfaces and provide a variety of different logistics service functions. The definition of the term logistics centre differs between countries and implies different functionalities. Locations are often selected randomly and business models are opportunity driven, especially in highly dynamic and less regulated new emerging economies. In particular Freight Villages as a special form of logistics centres have a high impact on regional development and serve as cargo generator for freight corridors. Consideration of general principles how to establish Freight Villages could improve the effectiveness of these logistics centres along freight corridors. Methods: Based on a literature review a comprehensive and hierarchical definition of logistics centres will be discussed and applied. From experiences in the development of logistics centres in several countries, especially in Germany and Lithuania, challenges and concepts concerning regulatory framework, determination of location and business and financing models are discussed. Results: Concerning the definition of logistics centres a hierarchical definition is applied which comprises different levels of logistics centres depending on the scope of the value adding and the functionality. As general principles for the development of Freight Villages the active role of the state, master planning, objective location finding, participation and co-operation of different stakeholders in the business model and a stepwise scheme for financing are introduced. Major trends for the future development of Freight Villages are the digitalization of supply chains, the application of new intermodal technologies and of innovative telematics systems, solutions for low emission and

Phonological Contribution during Visual Word Recognition in Child Readers. An Intermodal Priming Study in Grades 3 and 5

Science.gov (United States)

Sauval, Karinne; Casalis, Séverine; Perre, Laetitia

2017-01-01

This study investigated the phonological contribution during visual word recognition in child readers as a function of general reading expertise (third and fifth grades) and specific word exposure (frequent and less-frequent words). An intermodal priming in lexical decision task was performed. Auditory primes (identical and unrelated) were used in…

A Study in Sea-Air Intermodal Port Selection: Strategic Decision Making for United States Southern Command

Science.gov (United States)

2011-06-01

commerce ( B2B EC) and electronic data interchange (EDI) enabled by internet connectivity are leading the way in industry innovation. Business can profit...points. Companies like Bon-Ton Stores Inc. are rethinking their supply chains and are using intermodal for the first time ever. In this case, they...W. (1997). Strategic Decision Making: Multiobjective Decision Analysis with Spreadsheets. Belmont, CA: Wadsworth Publishing Company

Service network design for an intermodal container network with flexible due dates/times and the possibility of using subcontracted transport

NARCIS (Netherlands)

B. van Riessen (Bart); R.R. Negenborn (Rudy); R. Dekker (Rommert); G. Lodewijks (Gabriel)

2013-01-01

textabstractAn intermodal container transportation network is being developed between Rotterdam and several inland terminals in North West Europe: the EUROPEAN GATEWAY SERVICES (EGS) network. This network is developed and operated by the seaports of EUROPE CONTAINER TERMINALS (ECT). To use this

Facial Expression and Vocal Pitch Height: Evidence of an Intermodal Association

Directory of Open Access Journals (Sweden)

David Huron

2009-11-01

Full Text Available Forty-four participants were asked to sing moderate, high, and low pitches while their faces were photographed. In a two-alternative forced choice task, independent judges selected the high-pitch faces as more friendly than the low-pitch faces. When photographs were cropped to show only the eye region, judges still rated the high-pitch faces friendlier than the low-pitch faces. These results are consistent with prior research showing that vocal pitch height is used to signal aggression (low pitch or appeasement (high pitch. An analysis of the facial features shows a strong correlation between eyebrow position and sung pitch—consistent with the role of eyebrows in signaling aggression and appeasement. Overall, the results are consistent with an inter-modal linkage between vocal and facial expressions.

Environmental Factors and Intermodal Freight Transportation: Analysis of the Decision Bases in the Case of Spanish Motorways of the Sea

Directory of Open Access Journals (Sweden)

Miguel Ángel López-Navarro

2014-03-01

Full Text Available Today, there is widespread consensus about the notable, yet simultaneously growing, negative environmental impacts generated by the transportation sector. Experts working in a number of different fields consider the current situation to be unsustainable and possible measures to reduce emissions and foster sustainability are being encouraged. The European Commission has highlighted the need to shift away from unimodal road transport toward a greater use of intermodal transport through, for example, motorways of the sea, in light of the evidence that the former makes a significant contribution to increased CO2 emissions. However, although there is a general perception that sea transport is environmentally preferable to road transport, recent studies are beginning to question this assumption. Moreover, little research has been conducted to quantify environmental aspects and incorporate them into the decision-making processes involved in the modal shift. This study first reviews the existing literature to examine the extent to which environmental aspects are relevant in the modal choice in the case of short sea shipping and motorways of the sea. Related to this, the study also evaluates the role that different agents may play in making decisions about choice of mode, taking into consideration environmental aspects. Secondly, we use the values the European Commission provides to calculate external costs for the Marco Polo freight transport project proposals (call 2013 to estimate the environmental costs for several routes (a total of 72, comparing the use of road haulage with the intermodal option that incorporates the Spanish motorways of the sea. The results of this comparative analysis show that the intermodal option is not always the best choice in environmental terms. Consequently, the traditional environmental argument to justify this alternative must be used carefully.

The Intermodal Bike: multi-modal integration of cycling mobility through product and process innovations in bicycle design.

Science.gov (United States)

Tosi, Francesca; Belli, Alessandro; Rinaldi, Alessandra; Tucci, Grazia

2012-01-01

The paper presents the early results of the UE-FP7 project "The Intermodal Bike". The research aim is to provide a super-compactable, super-lightweight folding bicycle as a realistic solution to graft the cycling mode onto the root of the public or private transportation systems. The folding bikes now on the international market reach weighs between 12-15 kg, with a variable footprint but occupying -when compacted- an average volume of about 100 liters. To encourage the use of this vehicle and to extend it to a larger number of users with different characteristics, the research project has set its goal in increasing as possible compactness and light weight, creating a bicycle with a volume when compacted of 20 liters (reduction factor =5), with a shape of 48 × 36 × 12 cm and a weight of 5 kg. max., ensuring stability and improving vehicle usability and efficiency, during the ride and in the phase of bike folding. To achieve this goal ergonomic and usability tests have been carried out. The tests allowed to find a posture that would ensure efficiency and comfort in the ride to as many users as possible. Parallel tests were made on the vehicle usability in the urban transport system and intermodal. The need for light weight has required special studies on the optimization of the vehicle's architecture and research on super-lightweight materials.

Short-term forecasting of intermodal freight using ANNs and SVR: Case of the Port of Algeciras Bay

Energy Technology Data Exchange (ETDEWEB)

Moscoso Lopez, J.A.

2016-07-01

Forecasting of future intermodal traffic demand is very important for decision making in ports operations management. The use of accurate prediction tools is an issue that awakens a lot of interest among transport researchers. Intermodal freight forecasting plays an important role in ports management and in the planning of the principal port activities. Hence, the study is carried out under the motivation of knowing that modeling the freight transport flows could facilitate the management of the infrastructure and optimize the resources of the ports facilities. The use of advanced models for freight forecasting is essential to improve the port level-service and competitiveness. In this paper, two forecasting-models are presented and compared to predict the freight volume. The models developed and tested are based on Artificial Neural Networks and Support Vector Machines. Both techniques are based in a historical data and these methods forecast the daily weight of the freight with one week in advance. The performance of the models is evaluated on real data from Ro-Ro freight transport in the Port of Algeciras Bay. This work proposes and compares different approaches to determine the best prediction. In order to select the best model a multicomparison procedure is developed using several statistical test. The results of the assessed models show a promising tool to predict Ro-Ro transport flows with accuracy. (Author)

Interference between vibration-to-translation and vibration-to-vibration energy transfer modes in diatomic molecules at high collision energies

International Nuclear Information System (INIS)

Shin, H.K.

1983-01-01

An explicit time dependent approach for simultaneous VT and VV energy transfer in diatom--diatom collisions is explored using the exponential form of ladder operators in the solution of the Schroedinger equation of motion. The collision of two hydrogen molecules is chosen to illustrate the extent of interference between VT and VV modes among various vibrational states. While vibrational energy transfer processes of nominally VT type can be treated with pure VT mode at low collision energies, the intermode coupling is found to be very important at collision energies of several hω. The occurrence of the coupling appears to be nearly universal in vibrational transitions at such energies. Exceptions to the coupling have been discussed

Photon-Pair Sources Based on Intermodal Four-Wave Mixing in Few-Mode Fibers

Directory of Open Access Journals (Sweden)

Karsten Rottwitt

2018-05-01

Full Text Available Four-wave mixing in optical fibers has been proven to have many applications within processing of classical optical signals. In addition, recent developments in multimode fibers have made it possible to achieve the necessary phase-matching for efficient four-wave mixing over a very wide bandwidth. Thus, the combination of multimode fiber optics and four-wave mixing is very attractive for various applications. This is especially the case for applications in quantum communication, for example in photon-pair generation. This is the subject of this work, where we discuss the impact of fluctuations in core radius on the quality of the heralded single-photon states and demonstrate experimental results of intermodal spontaneous four-wave mixing for photon-pair generation.

Tradução intermodal, intersemiótica e interlinguística de textos escritos em Português para a Libras oral

Directory of Open Access Journals (Sweden)

Ronice Müller de Quadros

2015-10-01

Full Text Available http://dx.doi.org/10.5007/2175-7968.2015v35nesp2p354 Neste artigo apresentamos alguns tipos de tradução envolvidos na tradução de textos em português para a língua brasileira de sinais (Libras.  Discutimos esses diferentes tipos e destacamos a tradução intermodal, específica das traduções que envolvem uma língua de sinais. A tradução intermodal trata de aspectos visuais e operacionais implicados na tradução para Libras em forma de vídeo e aspectos linguísticos essencialmente visuais-espaciais que envolvem o uso do espaço em línguas de modalidade visual-espacial, ou seja, línguas de sinais. Neste artigo, apresentamos uma análise das implicações da modalidade a partir de exemplos de tradução realizados no contexto do Curso de Letras Libras da Universidade Federal de Santa Catarina (UFSC.

Study of the spectral width of intermode beats and optical spectrum of an actively mode-locked three-mirror semiconductor laser

International Nuclear Information System (INIS)

Zakharyash, Valerii F; Kashirsky, Aleksandr V; Klementyev, Vasilii M; Kuznetsov, Sergei A; Pivtsov, V S

2005-01-01

Various oscillation regimes of an actively mode-locked semiconductor laser are studied experimentally. Two types of regimes are found in which the minimal spectral width (∼3.5 kHz) of intermode beats is achieved. The width of the optical spectrum of modes is studied as a function of their locking and the feedback coefficients. The maximum width of the spectrum is ∼3.7 THz. (control of laser radiation parameters)

Cost and time models for the evaluation of intermodal chains by using short sea shipping in the North Sea Region: the Rosyth-Zeebrugge route

DEFF Research Database (Denmark)

Lopez, Alba Martínez; Kronbak, Jacob; Jiang, Liping

2015-01-01

This paper is framed in the context of the EU Interreg IVB North Sea Region project Food Port. In line with this project, this paper aims to define mathematically cost and time models able to provide realistic information about the performances of road haulage and of intermodal chains using short...

Identification of promising Twin Hub networks : Report of Work Package 1 of the Intermodal rail freight Twin hub Network Northwest Europe - project (final report)

NARCIS (Netherlands)

Kreutzberger, E.D.; Konings, J.W.; Meijer, S.; Witteveen, C.; Meijers, B.M.; Pekin, E.; Macharis, C.; Kiel, J.; Kawabata, Y.; Vos, W.

2014-01-01

This report is the first deliverable of the project Intermodal Rail Freight Twin Hub Network Northwest Europe. We call its subject Twin hub network and the organisational entity to carry out the actions the Twin hub project. The project is funded by INTERREG NWE (programme IVb). Its work started in

Identification of key target markets for intermodal freight transport solutions in South Africa

Directory of Open Access Journals (Sweden)

Joubert van Eeden

2010-11-01

Full Text Available The Accelerated and Shared Growth Initiative for South Africa (AsgiSA identified South Africa's freight logistics challenges as among the key binding constraints on the country's growth aspirations. The research presented here points to the structural imbalance between road and rail freight transport as one of the key contributors to this state of affairs. Most long-distance corridor transport has been captured by road. However, long-distance transport is a market segment that is very suitable for intermodal transportation : rail is utilised for the high-density, long-distance component and road for the feeder and distribution services at the corridor end points. A market segmentation approach is developed to identify the corridors and industries that are natural candidates for such solutions, thereby paving the way for role-players and stakeholders to initiate a dialogue on the development of appropriate solutions.

VeriTainer radiation detector for intermodal shipping containers

International Nuclear Information System (INIS)

Redus, R.H.; Alioto, M.; Sperry, D.; Pantazis, T.

2007-01-01

The VeriSpreader TM radiation detection system will monitor every container passing through a shipping terminal without impeding the flow of commerce by making the radiation measurements during normal container handling. This is accomplished by integrating neutron and spectroscopic γ-ray detectors into a container crane spreader bar, the part of the crane that directly engages the intermodal shipping containers while moving from ship to shore and vice versa. The use of a spectroscopic γ-detector reduces the rate of nuisance alarms due to naturally occurring radioactive material (NORM). The combination of γ and neutron detection reduces the effectiveness of shielding and countermeasures. The challenges in this spreader bar-based approach arise from the harsh environment, particularly the mechanical shock and the vibration of the moving spreader bar, since the measurement is taken while the container is moving. The electrical interfaces in the port environment, from the crane to a central monitoring office, present further challenges. It is the packaging, electronic interfaces, and data processing software that distinguish this system, which is based on conventional radiation sensors. The core of the system is Amptek's GAMMA-RAD, which integrates a ruggedized scintillator/PMT, digital pulse shaping electronics, electronics for the neutron detector, power supplies, and an Ethernet interface. The design of the VeriTainer system and results from both the laboratory and a proof-of-concept test at the Port of Oakland, California will be presented

Life-Cycle Cost and Risk Analysis of Alternative Configurations for Shipping Low-Level Radioactive Waste to the Nevada Test Site

International Nuclear Information System (INIS)

PM Daling; SB Ross; BM Biwer

1999-01-01

The Nevada Test Site (NTS) is a major receiver of low-level radioactive waste (LLW) for disposal. Currently, all LLW received at NTS is shipped by truck. The trucks use highway routes to NTS that pass through the Las Vegas Valley and over Hoover Dam, which is a concern of local stakeholder groups in the State of Nevada. Rail service offers the opportunity to reduce transportation risks and costs, according to the Waste Management Programmatic Environmental Impact Statement (WM-PEIS). However, NTS and some DOE LLW generator sites are not served with direct rail service so intermodal transport is under consideration. Intermodal transport involves transport via two modes, in this case truck and rail, from the generator sites to NTS. LLW shipping containers would be transferred between trucks and railcars at intermodal transfer points near the LLW generator sites, NTS, or both. An Environmental Assessment (EA)for Intermodal Transportation of Low-Level Radioactive Waste to the Nevada Test Site (referred to as the NTSIntermodal -M) has been prepared to determine whether there are environmental impacts to alterations to the current truck routing or use of intermodal facilities within the State of Nevada. However, an analysis of the potential impacts outside the State of Nevada are not addressed in the NTS Intermodal EA. This study examines the rest of the transportation network between LLW generator sites and the NTS and evaluates the costs, risks, and feasibility of integrating intermodal shipments into the LLW transportation system. This study evaluates alternative transportation system configurations for NTS approved and potential generators based on complex-wide LLW load information. Technical judgments relative to the availability of DOE LLW generators to ship from their sites by rail were developed. Public and worker risk and life-cycle cost components are quantified. The study identifies and evaluates alternative scenarios that increase the use of rail (intermodal

Life-Cycle Cost and Risk Analysis of Alternative Configurations for Shipping Low-Level Radioactive Waste to the Nevada Test Site

Energy Technology Data Exchange (ETDEWEB)

PM Daling; SB Ross; BM Biwer

1999-12-17

The Nevada Test Site (NTS) is a major receiver of low-level radioactive waste (LLW) for disposal. Currently, all LLW received at NTS is shipped by truck. The trucks use highway routes to NTS that pass through the Las Vegas Valley and over Hoover Dam, which is a concern of local stakeholder groups in the State of Nevada. Rail service offers the opportunity to reduce transportation risks and costs, according to the Waste Management Programmatic Environmental Impact Statement (WM-PEIS). However, NTS and some DOE LLW generator sites are not served with direct rail service so intermodal transport is under consideration. Intermodal transport involves transport via two modes, in this case truck and rail, from the generator sites to NTS. LLW shipping containers would be transferred between trucks and railcars at intermodal transfer points near the LLW generator sites, NTS, or both. An Environmental Assessment (EA)for Intermodal Transportation of Low-Level Radioactive Waste to the Nevada Test Site (referred to as the NTSIntermodal -M) has been prepared to determine whether there are environmental impacts to alterations to the current truck routing or use of intermodal facilities within the State of Nevada. However, an analysis of the potential impacts outside the State of Nevada are not addressed in the NTS Intermodal EA. This study examines the rest of the transportation network between LLW generator sites and the NTS and evaluates the costs, risks, and feasibility of integrating intermodal shipments into the LLW transportation system. This study evaluates alternative transportation system configurations for NTS approved and potential generators based on complex-wide LLW load information. Technical judgments relative to the availability of DOE LLW generators to ship from their sites by rail were developed. Public and worker risk and life-cycle cost components are quantified. The study identifies and evaluates alternative scenarios that increase the use of rail (intermodal

The Association between Intermodal (PM1-2.5) and PM1, PM2.5, Coarse Fraction and Meteorological Parameters in Various Environments in Central Europe.

Czech Academy of Sciences Publication Activity Database

Kozáková, Jana; Pokorná, P.; Černíková, A.; Hovorka, J.; Braniš, M.; Moravec, Pavel; Schwarz, Jaroslav

2017-01-01

Roč. 17, č. 5 (2017), s. 1234-1243 ISSN 1680-8584 R&D Projects: GA ČR(CZ) GBP503/12/G147 Institutional support: RVO:67985858 Keywords : intermodal fraction * personal cascade impactor sampler * PMx Subject RIV: DI - Air Pollution ; Quality OBOR OECD: Environmental sciences (social aspects to be 5.7) Impact factor: 2.606, year: 2016

LA REORDENACIÓN DEL SISTEMA DE TRANSPORTE PÚBLICO ANTE EVENTOS ESPECIALES, UN EJERCICIO PRÁCTICO DE COORDINACIÓN INTERMODAL

OpenAIRE

Galindo González, Pedro; Blanco Caballero, Nuria; Moreno Muñoz, Carmen; Chico González, Alejandro

2016-01-01

[ES] El Consorcio Regional de Transportes de Madrid (CRTM), como autoridad de transporte público de la región, coordina los más de 40 operadores públicos y privados para dar una respuesta óptima a las necesidades de movilidad de los ciudadanos. El transporte público en la Comunidad de Madrid constituye un sistema complejo de carácter intermodal, en el que operan modos de transporte urbanos e interurbanos, conectados mediante un conjunto de intercambiadores o áreas intermodales ...

Dual Neutral Particle Beam Interrogation of Intermodal Shipping Containers for Special Nuclear Material

Science.gov (United States)

Keith, Rodney Lyman

Intermodal shipping containers entering the United States provide an avenue to smuggle unsecured or stolen special nuclear material (SNM). The only direct method fielded to indicate the presence of SNM is by passive photon/neutron radiation detection. Active interrogation using neutral particle beams to induce fission in SNM is a method under consideration. One by-product of fission is the creation of fragments that undergo radioactive decay over a time period on the order of tens of seconds after the initial event. The "delayed" gamma-rays emitted from these fragments over this period are considered a hallmark for the presence of SNM. A fundamental model is developed using homogenized cargos with a SNM target embedded at the center and computationally interrogated using simultaneous neutron and photon beams. Findings from analysis of the delayed gamma emissions from these experiments are intended to mitigate the effects of poor quality information about the composition and disposition of suspect cargo before examination in an active interrogation portal.

Strategies and procedures for the development of intermodal freight transport in Europe: the role of motorways of the sea services and railway terminals

OpenAIRE

Lepori, Chiara

2009-01-01

Since the birth of the European Union on 1957, the development of a single market through the integration of national freight transport networks has been one of the most important points in the European Union agenda. Increasingly congested motorways, rising oil prices and concerns about environment and climate change require the optimization of transport systems and transport processes. The best solution should be the intermodal transport, in which the most efficient transport options are use...

Study on Evaluation Indicators System of Crowd Management for Transfer Stations Based on Pedestrian Simulation

Directory of Open Access Journals (Sweden)

Guanghou Zhang

2011-12-01

Full Text Available Improving safety and convenience of transfer is one of the most vital tasks in subway system planning, design and operation management. Because of complicated space layout and crowded pedestrian, crowd control is a big challenge for management of transfer stations. Thus, a quantitative evaluation should be done before improvement measures are carried out. Literature review showed that present evaluation indicators about crowd management in subway system were all based on fixed value or experience. Dynamic effect caused by pedestrian congestion and various facility combination cannot be represented based on these indicators. Thus, in this paper, based on the pedestrian simulation tool, dynamic evaluation indicators system of crowd management was established from the point of safety, cost-effectiveness and comfort. In order to aid decision makers to identify the most appropriate scenario to improve the effectiveness of crowd management, Matter-Element Analysis (MEA was used to rate different scenarios. A pedestrian simulation model of a designing intermodal transfer station was built and four different scenarios were tested to demonstrate how to use this indicators system. Simulation results were evaluated based on the dynamic indicators system and MEA. The application results show that the dynamic evaluation indicators system is operational and can reflect level of the crowd management in transfer station comprehensively and precisely.

Using hybrid latent class model for city-HUBs´users behaviour analysis

OpenAIRE

Di Ciommo, Floridea; Monzón de Cáceres, Andrés; Oña, Rocío de; Oña López, Juan de; Hernández del Olmo, Sara

2014-01-01

Data from an attitudinal survey and stated preference ranking experiment conducted in two urban European interchanges (i.e. City-HUBs) in Madrid (Spain) and Thessaloniki (Greece) show that the importance that City-HUBs users attach to the intermodal infrastructure varies strongly as a function of their perceptions of time spent in the interchange (i.e.intermodal transfer and waiting time). A principal components analysis allocates respondents (i.e. city-HUB users) to two classes with substant...

Comparison of differences between ports for radioactive material transport

International Nuclear Information System (INIS)

Massey, C.D.; Wheeler, T.A.; Yoshimura, H.R.

1994-01-01

Recent controversy and litigation over the import/export of radioactive materials into and out of the United States via United States ports has centered on differences between ports, especially differences in surrounding population densities, and also whether reliance on one or a few ports poses unacceptable risks for these ports and the surrounding populations. This study examines the results of risk analyses from several recent environmental assessments dealing with import/export of various types of radioactive materials ranging from uranium hexafluoride to spent nuclear fuel. Since an intermodal transfer is always involved, the maritime and intermodal transportation is broken down into its component activities and segments; each is determined separately. The results indicate that most of the potential exposure occurs during routine handling of packages during intermodal transfer. Since handling of containerized cargo is highly standardized at ports around the world, differences between ports are of secondary importance. The risks associated with any overland transport from port to inland destination are primarily a function of distance for a given package type

Interobserver and intermodality variability in GTV delineation on simulation CT, FDG-PET, and MR Images of Head and Neck Cancer.

Science.gov (United States)

Anderson, Carryn M; Sun, Wenqing; Buatti, John M; Maley, Joan E; Policeni, Bruno; Mott, Sarah L; Bayouth, John E

2014-09-01

To compare the interobserver and intermodality differences in image-based identification of head and neck primary site gross tumor volumes (GTV). Modalities compared include: contrast-enhanced CT, F-18 fluorodeoxyglucose positron emission tomography (PET/CT) and contrast-enhanced MRI. Fourteen patients were simulated after immobilization for all 3 imaging modalities (CT, PET/CT, MRI). Three radiation oncologists (RO) contoured GTVs as seen on each modality. The GTV was contoured first on the contrast-enhanced CT (considered the standard), then on PET/CT, and finally on post-contrast T1 MRI. Interobserver and intermodality variability were analyzed by volume, intersection, union, and volume overlap ratio (VOR). Analysis of RO contours revealed the average volume for CT-, PET/CT-, and MRI-derived GTVs were 45cc, 35cc and 49cc, respectively. In 93% of cases PET/CT-derived GTVs had the smallest volume and in 57% of cases MRI-derived GTVs had the largest volume. CT showed the largest variation in target definition (standard deviation amongst observers 35%) compared to PET/CT (28%) and MRI (27%). The VOR was largest (indicating greatest interobserver agreement) in PET/CT (46%), followed by MRI (36%), followed by CT (34%). For each observer, the least agreement in GTV definition occurred between MRI & PET/CT (average VOR = 41%), compared to CT & PET/CT (48%) and CT & MRI (47%). A nonsignificant interobserver difference in GTVs for each modality was seen. Among three modalities, CT was least consistent, while PET/CT-derived GTVs had the smallest volumes and were most consistent. MRI combined with PET/CT provided the least agreement in GTVs generated. The significance of these differences for head & neck cancer is important to explore as we move to volume-based treatment planning based on multi-modality imaging as a standard method for treatment delivery.

Intermodal safety research needs report of the sixth workshop on national transportation problems

Energy Technology Data Exchange (ETDEWEB)

Warshawer, A.J. (ed.)

1976-04-01

This conference brought together DOT policymakers, university principal investigators and other professionals to consider the intermodal safety research requirements of the Department of Transportation. The objectives of the conference were: (1) to highlight safety problems and needed transportation safety research identified by DOT modal safety managers and to stimulate university or university/industry teams to respond with research proposals which emphasize multi-modal applicability and a system view; and (2) to provide a forum for university research groups to inform DOT safety managers of promising new directions in transportation safety research and new tools with which to address safety related problems. The conference addressed the research requirements for safety as identified by the Statement of National Transportation Policy and by the modal safety managers in three principal contexts, each a workshop panel: I, Inter-Institutional Problems of Transportation Safety. Problems were described as: Federal-State, local; Federal-Industry; Federal-Public, Consumer groups. II, Goal Setting and Planning for Transportation Safety Programs. Issues were: modifying risk behavior, safety as a social value, and involving citizens in development of standards as a way of increasing probability of achieving program objectives. III, DOT Information, Management, and Evaluation Systems Requirements. Needs were: data requirements and analytic tools for management of safety programs.

23 CFR 505.5 - Definitions.

Science.gov (United States)

2010-04-01

... HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION TRANSPORTATION INFRASTRUCTURE MANAGEMENT PROJECTS OF... related in the function they perform eligible for Federal assistance under title 23, United States Code... infrastructure modifications to facilitate intermodal interchange, transfer, and access into and out of ports and...

Analytical methods and simulation models to assess innovative operational measures and technologies for rail port terminals: the case of Valencia Principe Felipe terminal

Energy Technology Data Exchange (ETDEWEB)

Ricci, S.

2016-07-01

The topic of freight transport by rail is a complex theme and, in recent years, a main issue of European policy. The legislation evolution and the White Paper 2011 have demonstrated the European intention to re-launch this sector. The challenge is to promote the intermodal transport system to the detriment of road freight transport. In this context intermodal freight terminals, play a primary role for the supply chain, they are the connection point between the various transport nodes and the nodal points where the freight are handled, stored and transferred between different modes to final customer. To achieve the purpose, it is strengthen the improvement of existing intermodal freight terminals and the development of innovative intermodal freight terminals towards higher performance (ERRAC, 2012). Many terminal performances improvements have been proposed and sometime experimented. They are normally basing on combinations of operational measures and innovative technologies (e.g. automatic horizontal and parallel storage and handling, automated gate and sensors for tracking systems data exchange) tested in various terminals, with often-contradictory results. The research work described in this paper (developed within the Capacity4Rail EU project) focusses on the assessment of effects that these innovations can have in the intermodal freight terminals combined in various alternative consistent effective scenarios. The methodological framework setup to assess these innovations is basing on a combination of analytical methods based on sequential algorithms and discrete events simulation models. The output of this assessment method are key performance indicators (KPIs) selected according to terminals typologies and related to different aspects (e.g. management, operation and organization). The present paper illustrates the application of the methodological framework, tuned on the operation of various intermodal terminals, for the validation on today operation and the

Mega hub for intermodal transport - the planning of the most advanced container terminal in the world; Mega-Drehscheibe fuer den Kombinierten Verkehr - Planung des modernsten Containerbahnhofes der Welt

Energy Technology Data Exchange (ETDEWEB)

Franke, K.P. [Noell Stahl- und Maschinenbau GmbH, Wuerzburg (Germany). Abt. Hafentechnik

1998-12-31

The introduction of innovative mega hub systems for the operation of cargo trains is a promising starting point for increasing the efficiency of intermodal transport. A first mega hub as it is known has been planned for Northern Germany with its centre in Lehrte near Hannover. Instead of shunting the waggons, containers will be transferred from train to train at the mega hub. This is not only faster, but also more economical and thus more attractive to rail transport clients. No other known system can achieve such high transhipment/shunting capacities per surface unit. The design of the system guarantees the maximum degree of flexibility in transhipment operations. A high degree of automation will ensure the quality and speed of transhipment. The technical development of the fast transhipment system (FTS) by Noell has been completed. (orig.) [Deutsch] Ein vielversprechender Ansatz fuer die Steigerung der Leistungsfaehigkeit des Kombinierten Verkehrs (KV) ist die Einfuehrung von innovativen Drehscheibensystemen fuer den Betrieb der Cargo-Zuege. Eine erste sogenannte Mega-Drehscheibe wurde fuer den Norden Deutschlands mit Zentrum Lehrte bei Hannover geplant. Statt zu rangieren sollen in der Mega-Drehscheibe die Behaelter zwischen den Zuegen umsteigen. Das ist schneller, kostenguenstiger und damit attraktiver fuer den Bahnkunden. Darueber hinaus ist kein System bekannt, bei dem eine so hohe Umschlag-/Umstelleistung je Flaecheneinheit realisiert werden kann. Die Gestaltung der Anlage gewaehrt eine maximale Flexibilitaet im Umschlagbetrieb. Ein hoher Automatisierungsgrad wird Qualitaet und Schnelligkeit des Umschlages sichern. Die technische Entwicklung der Schnellumschlagtechnik seitens Noell ist abgeschlossen. (orig.)

Deep-sea faunal communities associated with a lost intermodal shipping container in the Monterey Bay National Marine Sanctuary, CA.

Science.gov (United States)

Taylor, Josi R; DeVogelaere, Andrew P; Burton, Erica J; Frey, Oren; Lundsten, Lonny; Kuhnz, Linda A; Whaling, P J; Lovera, Christopher; Buck, Kurt R; Barry, James P

2014-06-15

Carrying assorted cargo and covered with paints of varying toxicity, lost intermodal containers may take centuries to degrade on the deep seafloor. In June 2004, scientists from Monterey Bay Aquarium Research Institute (MBARI) discovered a recently lost container during a Remotely Operated Vehicle (ROV) dive on a sediment-covered seabed at 1281 m depth in Monterey Bay National Marine Sanctuary (MBNMS). The site was revisited by ROV in March 2011. Analyses of sediment samples and high-definition video indicate that faunal assemblages on the container's exterior and the seabed within 10 m of the container differed significantly from those up to 500 m. The container surface provides hard substratum for colonization by taxa typically found in rocky habitats. However, some key taxa that dominate rocky areas were absent or rare on the container, perhaps related to its potential toxicity or limited time for colonization and growth. Ecological effects appear to be restricted to the container surface and the benthos within ∼10 m. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Effects of intermode nonlinearity and intramode nonlinearity on modulation instability in randomly birefringent two-mode optical fibers

Science.gov (United States)

Li, Jin Hua; Xu, Hui; Sun, Ting Ting; Pei, Shi Xin; Ren, Hai Dong

2018-05-01

We analyze in detail the effects of the intermode nonlinearity (IEMN) and intramode nonlinearity (IRMN) on modulation instability (MI) in randomly birefringent two-mode optical fibers (RB-TMFs). In the anomalous dispersion regime, the MI gain enhances significantly as the IEMN and IRMN coefficients increases. In the normal dispersion regime, MI can be generated without the differential mode group delay (DMGD) effect, as long as the IEMN coefficient between two distinct modes is above a critical value, or the IRMN coefficient inside a mode is below a critical value. This critical IEMN (IRMN) coefficient depends strongly on the given IRMN (IEMN) coefficient and DMGD for a given nonlinear RB-TMF structure, and is independent on the input total power, the power ratio distribution and the group velocity dispersion (GVD) ratio between the two modes. On the other hand, in contrast to the MI band arising from the pure effect of DMGD in the normal dispersion regime, where MI vanishes after a critical total power, the generated MI band under the combined effects of IEMN and IRMN without DMGD exists for any total power and enhances with the total power. The MI analysis is verified numerically by launching perturbed continuous waves (CWs) with wave propagation method.

Um modelo de fluxos e localização de terminais intermodais para escoamento da soja brasileira destinada à exportação A model for flow allocation and location of intermodal terminals for the Brazilian soybean exports

Directory of Open Access Journals (Sweden)

Mônica do Amaral

2012-12-01

Full Text Available A consideração de rotas intermodais pode ser vantajosa em diversas situações, como nos casos de escoamento de produtos agrícolas para exportação. Entretanto, a possibilidade de redução dos custos logísticos está condicionada à existência de instalações que permitam o transbordo de carga e a integração entre os modais disponíveis. Nesse contexto, propõe-se um modelo de fluxos e localização de terminais intermodais, com o objetivo de apoiar decisões de investimento em infraestrutura e de roteirização na rede. O modelo possui forte relação com problemas de p-medianas, sabidamente NP-difíceis. São considerados múltiplos níveis, em que cada nível corresponde ao fluxo entre dois terminais, e uma estrutura esparsa para representação da rede. Testes realizados com uma rede para exportação de soja baseada em dados secundários foram utilizados para verificar a coerência e ilustrar o potencial de análise do modelo, enquanto instâncias geradas aleatoriamente serviram para avaliar seu desempenho computacional utilizando-se dois softwares de otimização.The use of intermodal routes may be advantageous in several situations such as to export agricultural products. However, the possibility of reducing logistics costs depends on the existence of intermodal facilities for the transshipment and the integration between the available modes. In this context, we propose a model for flow allocation and location of intermodal terminals to support investment decisions in network infrastructure and routing. The model is closely related to the NP-hard p-median problem. Multiple levels were used to represent the flows between two terminals, and a sparse structure was used for the network matrix representation. Tests using a soybean network for exports based on secondary data were performed to verify the model consistency and to illustrate the potential of analysis of the model, while randomly generated instances were used to evaluate

MRI morphologic alterations after liver SBRT. Direct dose correlation with intermodal matching

Energy Technology Data Exchange (ETDEWEB)

Boda-Heggemann, Judit; Jahnke, Anika; Jahnke, Lennart; Vogel, Lena; Simeonova-Chergou, Anna O.; Herskind, Carsten; Wenz, Frederik; Lohr, Frank [University of Heidelberg, Department of Radiation Oncology, University Medical Center Mannheim, Mannheim (Germany); Attenberger, Ulrike; Budjan, Johannes [University of Heidelberg, Department of Clinical Radiology and Nuclear Medicine, University Medical Center Mannheim, Mannheim (Germany)

2016-09-15

CT morphologic and histopathologic alterations have been reported after SBRT. We analyzed the correlation of MRI morphologic alterations with radiation doses to assess the potential for MRI-based dose-effect correlation in healthy liver tissue. MRI data of 24 patients with liver metastases 7±3 weeks after image-guided SBRT in deep-inspiration breath-hold were retrospectively analyzed. MRI images were intermodally matched to the planning CT and corresponding dose distribution. Absolute doses were converted to EQD{sub 2,α/β=x} with α/β values of 2, 3 for healthy liver tissue, 8 Gy for modelled predamaged liver tissue and 10 Gy for tumor tissue. A central nonenhancing area was observed within the isodose lines of nominally 48.2 ± 15.2 Gy, EQD{sub 2Gy/α/β=10} 92.5 ± 27.7 Gy. Contrast-enhancement around the central nonenhancing area was observed within the isodose lines of nominally 46.9 ± 15.3 Gy, EQD{sub 2Gy/α/β=10} 90.5 ± 28.3 Gy. Outside the high-dose volume, in the beam path, characteristic sharply defined, nonblurred MRI morphologic alterations were observed that corresponded with the following isodose lines: T1-intensity changes occurred at isodose lines of nominally 21.9 ± 6.7 Gy (EQD{sub 2,α/β=2} 42.5 ± 8.7 Gy, EQD{sub 2,α/β=3} 38.5 ± 7.6 Gy, EQD{sub 2,α/β=8} 30.2 ±6.3 Gy). T2-hyper/hypointensity was observed within isodose lines of nominally 22.4 ± 6.6 Gy (EQD{sub 2,α/β=2} 42.7 ± 8.1 Gy, EQD{sub 2,α/β=3} 38.7 ± 7 Gy; EQD{sub 2,α/β=8} 30.5 ± 5.9 Gy). Using deformable matching, direct spatial/dosimetric correlation of SBRT-induced changes in liver tissue was possible. In the PTV high-dose region, a central nonenhancing area and peripheral contrast medium accumulation was observed. Beam path doses of 38-42 Gy (EQD{sub 2,α/β=2-3}) induce characteristic MRI morphologic alterations. (orig.) [German] CT-morphologische Veraenderungen nach SBRT sind beschrieben und korrelieren mit histopathologischen Veraenderungen. Ziel war es, MRT

TITAN Legal Weight Truck cask preliminary design report

International Nuclear Information System (INIS)

1990-04-01

The Preliminary Design of the TITAN Legal Weight Truck (LWT) Cask System and Ancillary Equipment is presented in this document. The scope of the document includes the LWT cask with fuel baskets; impact limiters, and lifting and tiedown features; the cask support system for transportation; intermodal transfer skid; personnel barrier; and cask lifting yoke assembly. 75 figs., 48 tabs

Intentional cargo disruption by nefarious means: Examining threats, systemic vulnerabilities and securitisation measures in complex global supply chains.

Science.gov (United States)

McGreevy, Conor; Harrop, Wayne

2015-01-01

Global trade and commerce requires products to be securely contained and transferred in a timely way across great distances and between national boundaries. Throughout the process, cargo and containers are stored, handled and checked by a range of authorities and authorised agents. Intermodal transportation involves the use of container ships, planes, railway systems, land bridges, road networks and barges. This paper examines the the nefarious nature of intentional disruption and nefarious risks associated with the movement of cargo and container freight. The paper explores main threats, vulnerabilities and security measures relevant to significant intermodal transit risk issues such as theft, piracy, terrorism, contamination, counterfeiting and product tampering. Three risk and vulnerability models are examined and basic standards and regulations that are relevant to safe and secure transit of container goods across international supply networks are outlined.

CONCERNING THE PROBLEM OF SEMANTIC CONTRADICTIONS ARISING WHEN USING THE TERMS “INTERMODAL” AND “MULTIMODAL” PASSENGER CARRIAGES

Directory of Open Access Journals (Sweden)

Norayr Oganesovich Bludyan

2017-05-01

Full Text Available This article examines Russian and foreign regulatory documents, concerning the issues of intermodal/multimodal passenger carriages, shows the essence of intermodal transportation in passenger transport, includes the analysis of various approaches to the concepts of “intermodal passenger transportations” and “multimodal passenger transportations” and contains proposals for legislative consolidation of the mentioned terms and for the implementation of intermodal technologies in passenger transport.

MAINTAINING ACCESS TO AMERICA'S INTERMODAL PORTS/TECHNOLOGIES FOR DECONTAMINATION OF DREDGED SEDIMENT: NEW YORK/NEW JERSEY HARBOR.

Energy Technology Data Exchange (ETDEWEB)

STERN,E.A.; JONES,K.; DONATO,K.; PAULING,J.D.; SONTAG,J.G.; CLESCERI,N.L.; MENSINGER,M.C.; WILDE,C.L.

1998-05-01

One of the greatest drivers for maintaining access to America's Intermodal ports and related infrastructure redevelopment efforts over the next several years will be the control and treatment of contaminated sediments dredged from our nation's waterways. More than 306 million cubic meters (m{sup 3}) (400 million cubic yards [cy]) of sediments are dredged annually from U.S. waterways, and each year close to 46 million m{sup 3} (60 million cy) of this material is disposed of in the ocean (EPA 842-F-96-003). The need to protect our environment against undesirable effects from sediment dredging and disposal practices is gaining increased attention from the public and governmental agencies. Meeting this need is a challenging task not only from the standpoint of solving formidable scientific and engineering problems, but also, and more importantly, from the need to implement complex collaborations among the many different parties concerned with the problem. Some 40 years ago, C.P. Snow pointed out the problems involved in communicating between the two cultures of the sciences and the humanities (Snow, 1993). Today, it is necessary to extend Snow's concept to a multicultural realm with groups that include governmental, industrial, environmental, academic, and the general public communicating in different languages based on widely different fundamental assumptions.

Mechanisms of Coupled Vibrational Relaxation and Dissociation in Carbon Dioxide.

Science.gov (United States)

Armenise, Iole; Kustova, Elena

2018-05-21

A complete vibrational state-specific kinetic scheme describing dissociating carbon dioxide mixtures is proposed. CO 2 symmetric, bending and asymmetric vibrations and dissociation-recombination are strongly coupled through inter-mode vibrational energy transfers. Comparative study of state-resolved rate coefficients is carried out; the effect of different transitions may vary considerably with temperature. A non-equilibrium 1-D boundary layer flow typical to hypersonic planetary entry is studied in the state-to-state approach. To assess the sensitivity of fluid-dynamic variables and heat transfer to various vibrational transitions and chemical reactions, corresponding processes are successively included to the kinetic scheme. It is shown that vibrational-translational (VT) transitions in the symmetric and asymmetric modes do not alter the flow and can be neglected whereas the VT 2 exchange in the bending mode is the main channel of vibrational relaxation. Inter-mode vibrational exchanges affect the flow implicitly, through energy redistribution enhancing VT relaxation; the dominating role belongs to near-resonant transitions between symmetric and bending modes as well as between CO molecules and CO 2 asymmetric mode. Strong coupling between VT 2 relaxation and chemical reactions is emphasized. While vibrational distributions and average vibrational energy show strong dependence on the kinetic scheme, the heat flux is more sensitive to chemical reactions.

75 FR 7152 - CSX Transportation, Inc.-Trackage Rights Exemption-Grand Trunk Western Railroad Company

Science.gov (United States)

2010-02-17

... plans are to reroute two sets of approximately 5,000 foot long high priority intermodal United Parcel Service (UPS) trains that originate or terminate at CSX Intermodal's Bedford Park Intermodal Terminal. The UPS trains handle freight to and from the southeastern region of the United States served by CSXT. The...

Interwoven fluctuations during intermodal perception: fractality in head sway supports the use of visual feedback in haptic perceptual judgments by manual wielding.

Science.gov (United States)

Kelty-Stephen, Damian G; Dixon, James A

2014-12-01

Intermodal integration required for perceptual learning tasks is rife with individual differences. Participants vary in how they use perceptual information to one modality. One participant alone might change her own response over time. Participants vary further in their use of feedback through one modality to inform another modality. Two experiments test the general hypothesis that perceptual-motor fluctuations reveal both information use within modality and coordination among modalities. Experiment 1 focuses on perceptual learning in dynamic touch, in which participants use exploratory hand-wielding of unseen objects to make visually guided length judgments and use visual feedback to rescale their judgments of the same mechanical information. Previous research found that the degree of fractal temporal scaling (i.e., "fractality") in hand-wielding moderates the use of mechanical information. Experiment 1 shows that head-sway fractality moderates the use of visual information. Further, experience with feedback increases head-sway fractality and prolongs its effect on later hand-wielding fractality. Experiment 2 replicates effects of head-sway fractality moderating use of visual information in a purely visual-judgment task. Together, these findings suggest that fractal fluctuations may provide a modal-general window onto not just how participants use perceptual information but also how well they may integrate information among different modalities. PsycINFO Database Record (c) 2014 APA, all rights reserved.

MAINTAINING ACCESS TO AMERICA'S INTERMODAL PORTS/TECHNOLOGIES FOR DECONTAMINATION OF DREDGED SEDIMENT: NEW YORK/NEW JERSEY HARBOR

Energy Technology Data Exchange (ETDEWEB)

STERN,E.A.; JONES,K.; DONATO,K.; PAULING,J.D.; SONTAG,J.G.; CLESCERI,N.L.; MENSINGER,M.C.; WILDE,C.L.

1998-05-01

One of the greatest drivers for maintaining access to America's Intermodal ports and related infrastructure redevelopment efforts over the next several years will be the control and treatment of contaminated sediments dredged from the nation's waterways. More than 306 million cubic meters (m{sup 3}) (400 million cubic yards [cy]) of sediments are dredged annually from US waterways, and each year close to 46 million m{sup 3} (60 million cy) of this material is disposed of in the ocean (EPA 842-F-96-003). The need to protect the environment against undesirable effects from sediment dredging and disposal practices is gaining increased attention from the public and governmental agencies. Meeting this need is a challenging task not only from the standpoint of solving formidable scientific and engineering problems, but also, and more importantly, from the need to implement complex collaborations among the many different parties concerned with the problem. Some 40 years ago, C.P. Snow pointed out the problems involved in communicating between the two cultures of the sciences and the humanities (Snow, 1993). Today, it is necessary to extend Snow's concept to a multicultural realm with groups that include governmental, industrial, environmental, academic, and the general public communicating in different languages based on widely different fundamental assumptions. The handling of contaminated sediments in the Port of New York/New Jersey (Port) exemplifies this problem. This paper describes a multicultural team that has formed as the result of a Congressional mandate for the development of procedures suitable for the decontamination of sediments in the Port under the Water Resources Development Act (WRDA) of 1992 (Section 405C) and 1996 (Section 226).

TITAN Legal Weight Truck cask preliminary design report

International Nuclear Information System (INIS)

1990-04-01

The Preliminary Design of the TITAN Legal Weight Truck (LWT) Cask System and Ancillary Equipment is presented in this document. The scope of this document includes the LWT cask with fuel baskets, impact limiters, and lifting and tiedown features; the cask support system for transportation; intermodal transfer skid; personnel barrier; and cask lifting yoke assembly. The results of the tradeoff studies and evaluations that were performed during the preliminary design are presented in Appendix A to this report. 51 figs., 17 tabs

TRANSFERENCE BEFORE TRANSFERENCE.

Science.gov (United States)

Bonaminio, Vincenzo

2017-10-01

This paper is predominantly a clinical presentation that describes the transmigration of one patient's transference to another, with the analyst functioning as a sort of transponder. It involves an apparently accidental episode in which there was an unconscious intersection between two patients. The author's aim is to show how transference from one case may affect transference in another, a phenomenon the author calls transference before transference. The author believes that this idea may serve as a tool for understanding the unconscious work that takes place in the clinical situation. In a clinical example, the analyst finds himself caught up in an enactment involving two patients in which he becomes the medium of what happens in session. © 2017 The Psychoanalytic Quarterly, Inc.

Transportation of Spent Nuclear Fuel and High Level Waste to Yucca Mountain: The Next Step in Nevada

International Nuclear Information System (INIS)

Sweeney, Robin L.; Lechel, David J.

2003-01-01

In the U.S. Department of Energy's ''Final Environmental Impact Statement for a Geologic Repository for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County, Nevada,'' the Department states that certain broad transportation-related decisions can be made. These include the choice of a mode of transportation nationally (mostly legal-weight truck or mostly rail) and in Nevada (mostly rail, mostly legal-weight truck, or mostly heavy-haul truck with use of an associated intermodal transfer station), as well as the choice among alternative rail corridors or heavy-haul truck routes with use of an associated intermodal transfer station in Nevada. Although a rail line does not service the Yucca Mountain site, the Department has identified mostly rail as its preferred mode of transportation, both nationally and in the State of Nevada. If mostly rail is selected for Nevada, the Department would then identify a preference for one of the rail corridors in consultation with affected stakeholders, particularly the State of Nevada. DOE would then select the rail corridor and initiate a process to select a specific rail alignment within the corridor for the construction of a rail line. Five proposed rail corridors were analyzed in the Final Environmental Impact Statement. The assessment considered the impacts of constructing a branch rail line in the five 400-meter (0.25mile) wide corridors. Each corridor connects the Yucca Mountain site with an existing mainline railroad in Nevada

Computational approach to large quantum dynamical problems

International Nuclear Information System (INIS)

Friesner, R.A.; Brunet, J.P.; Wyatt, R.E.; Leforestier, C.; Binkley, S.

1987-01-01

The organizational structure is described for a new program that permits computations on a variety of quantum mechanical problems in chemical dynamics and spectroscopy. Particular attention is devoted to developing and using algorithms that exploit the capabilities of current vector supercomputers. A key component in this procedure is the recursive transformation of the large sparse Hamiltonian matrix into a much smaller tridiagonal matrix. An application to time-dependent laser molecule energy transfer is presented. Rate of energy deposition in the multimode molecule for systematic variations in the molecular intermode coupling parameters is emphasized

FHWA operations support : port peak pricing program evaluation

Science.gov (United States)

2009-01-01

This report evaluates the applicability, Federal policy implications, and possible public and private sector roles related to peak pricing strategies at ports and intermodal facilities in the U.S. A number of ports and intermodal terminals are consid...

Dynamic crossmodal links revealed by steady-state responses in auditory-visual divided attention

NARCIS (Netherlands)

de Jong, Ritske; Toffanin, Paolo; Harbers, Marten; Martens, Sander

Frequency tagging has been often used to study intramodal attention but not intermodal attention. We used EEG and simultaneous frequency tagging of auditory and visual sources to study intermodal focused and divided attention in detection and discrimination performance. Divided-attention costs were

Vision and kinesthesis in spatial short-term memory.

Science.gov (United States)

Podros, L Z; Wyke, M A; Waters, J M

1981-10-01

This investigation examined the effects of different localizing cues on the precision with which subjects can recall the position of a target in space. The availability of the cues--vision, kinesthesis, or both--was varied during both learning and recall. Subjects (age range 26 to 58 yr.) placed the stimulus or watched it being placed. The stimulus was removed, and subjects replaced or indicated its replacement location. Results show a striking similarity of performance for all subjects and significant performance differences relative to the different cues. The results provide information about intramodal and intermodal visual and kinesthetic transfer effects and about the effects of unimodal and multimodal input in such transfer. Results confirm a dominance of vision over kinesthesis, i.e., "kinesthetic memory" does not provide as accurate localizing information as does "visual memory."

Comparisons of power transfer functions and flow transfer functions

International Nuclear Information System (INIS)

Grimm, K.N.; Meneghetti, D.

1987-01-01

Transfer functions may be used to calculate component feedbacks or temperature increments by convolution of the transfer function with the appropriate fractional change in system-quantity. Power-change transfer functions have been reported. The corresponding flow transfer functions for this case, and comparison with the power transfer functions, are reported here. Results of feedback simulation of ramped flow transients using flow transfer functions are also described

Technology Transfer Issues and a New Technology Transfer Model

Science.gov (United States)

Choi, Hee Jun

2009-01-01

The following are major issues that should be considered for efficient and effective technology transfer: conceptions of technology, technological activity and transfer, communication channels, factors affecting transfer, and models of transfer. In particular, a well-developed model of technology transfer could be used as a framework for…

Expert Performance Transfer: Making Knowledge Transfer Count

International Nuclear Information System (INIS)

Turner, C.L.; Braudt, T.E.

2011-01-01

'Knowledge Transfer' is a high-priority imperative as the nuclear industry faces the combined effects of an aging workforce and economic pressures to do more with less. Knowledge Transfer is only a part of the solution to these challenges, however. The more compelling and immediate need faced by industry is Accomplishment Transfer, or the transference of the applied knowledge necessary to assure optimal performance transfer from experienced, high-performing staff to inexperienced staff. A great deal of industry knowledge and required performance information has been documented in the form of procedures. Often under-appreciated either as knowledge stores or as drivers of human performance, procedures, coupled with tightly-focused and effective training, are arguably the most effective influences on human and plant performance. (author)

Transport of spent nuclear fuel from the High Flux Beam Reactor

International Nuclear Information System (INIS)

Holland, Michael; Carelli, Joseph; Shelton, Thomas

1997-01-01

The shipment of more than 1000 elements of spent nuclear fuel (SNF) from the Department of Energy's Brookhaven National Laboratory (BNL) High Flux Beam Reactor (HFBR) to the Department's Savannah River Site (SRS) for long term interim storage required overcoming several significant obstacles. The project management team was comprised of DOE, BNL and NAC International personnel. This achievement involved coordinating the efforts of numerous government and contractor organizations such as the U.S. Coast Guard, the U.S. Nuclear Regulatory Commission, state and local governments, marine and motor carriers, and carrier inspectors. Unique experience was gained during development and execution of the project in the following areas: dry transfer of SNF to shipping casks; inter-modal transfers; logistics; cask licensing by the Nuclear Regulatory Commission (NRC); compliance with environmental regulations; transportation plan development, and stakeholder outreach and coordination

Heat transfer

International Nuclear Information System (INIS)

Saad, M.A.

1985-01-01

Heat transfer takes place between material systems as a result of a temperature difference. The transmission process involves energy conversions governed by the first and second laws of thermodynamics. The heat transfer proceeds from a high-temperature region to a low-temperature region, and because of the finite thermal potential, there is an increase in entropy. Thermodynamics, however, is concerned with equilibrium states, which includes thermal equilibrium, irrespective of the time necessary to attain these equilibrium states. But heat transfer is a result of thermal nonequilibrium conditions, therefore, the laws of thermodynamics alone cannot describe completely the heat transfer process. In practice, most engineering problems are concerned with the rate of heat transfer rather than the quantity of heat being transferred. Resort then is directed to the particular laws governing the transfer of heat. There are three distinct modes of heat transfer: conduction, convection, and radiation. Although these modes are discussed separately, all three types may occur simultaneously

Radiation Scanning Methods for Ship-to-Rail Intermodal Cargo Containers

International Nuclear Information System (INIS)

Reichmuth, Barbara A.; Stansbury, Paul S.; Taira, Randal Y.; Sanquist, Thomas F.; Collins, Robert

2009-01-01

The Department of Homeland Security's (DHS) Domestic Nuclear Detection Office (DNDO) runs the Rail Test Center (RTC) at the Port of Tacoma (POT). The RTC affords DNDO with the opportunity to test radiological and nuclear threat detection systems associated with the unique on-dock rail environment while in an operational seaport. DNDO selected the Pacific Northwest National Laboratory (PNNL) to manage the RTC. The RTC is conducting various evaluation studies to assess scanning opportunities in terms of their affects on the number of container moves required and the affect that the scanning opportunity has on the time it takes to move a container through the on-dock transfer process from ship to rail. The velocity and the number of container moves are directly associated with incremental costs to the terminal operators; increases in either of these parameters help in-form the potential for incremental costs that would result from the implementation of the opportunity.

The effect of the number of transferred embryos, the interval between nuclear transfer and embryo transfer, and the transfer pattern on pig cloning efficiency.

Science.gov (United States)

Rim, Chol Ho; Fu, Zhixin; Bao, Lei; Chen, Haide; Zhang, Dan; Luo, Qiong; Ri, Hak Chol; Huang, Hefeng; Luan, Zhidong; Zhang, Yan; Cui, Chun; Xiao, Lei; Jong, Ui Myong

2013-12-01

To improve the efficiency of producing cloned pigs, we investigated the influence of the number of transferred embryos, the culturing interval between nuclear transfer (NT) and embryo transfer, and the transfer pattern (single oviduct or double oviduct) on cloning efficiency. The results demonstrated that transfer of either 150-200 or more than 200NT embryos compared to transfer of 100-150 embryos resulted in a significantly higher pregnancy rate (48 ± 16, 50 ± 16 vs. 29 ± 5%, pcloning efficiency is achieved by adjusting the number and in vitro culture time of reconstructed embryos as well as the embryo transfer pattern. Copyright © 2013 Elsevier B.V. All rights reserved.

"Transfer Shock" or "Transfer Ecstasy?"

Science.gov (United States)

Nickens, John M.

The alleged characteristic drop in grade point average (GPA) of transfer students and the subsequent rise in GPA was investigated in this study. No statistically significant difference was found in first term junior year GPA between junior college transfers and native Florida State University students after the variance accounted for by the…

Heat transfer enhancement

International Nuclear Information System (INIS)

Hasatani, Masanobu; Itaya, Yoshinori

1985-01-01

In order to develop energy-saving techniques and new energy techniques, and also most advanced techniques by making industrial equipment with high performance, heat transfer performance frequently becomes an important problem. In addition, the improvement of conventional heat transfer techniques and the device of new heat transfer techniques are often required. It is most proper that chemical engineers engage in the research and development for enhancing heat transfer. The research and development for enhancing heat transfer are important to heighten heat exchange efficiency or to cool equipment for preventing overheat in high temperature heat transfer system. In this paper, the techniques of enhancing radiative heat transfer and the improvement of radiative heat transfer characteristics are reported. Radiative heat transfer is proportional to fourth power of absolute temperature, and it does not require any heat transfer medium, but efficient heat-radiation converters are necessary. As the techniques of enhancing radiative heat transfer, the increase of emission and absorption areas, the installation of emissive structures and the improvement of radiative characteristics are discussed. (Kako, I.)

International technology transfer

International Nuclear Information System (INIS)

Kwon, Won Gi

1991-11-01

This book introduces technology progress and economic growth, theoretical consideration of technology transfer, policy and mechanism on technology transfer of a developed country and a developing country, reality of international technology transfer technology transfer and industrial structure in Asia and the pacific region, technology transfer in Russia, China and Eastern Europe, cooperation of science and technology for development of Northeast Asia and strategy of technology transfer of Korea.

Transfer function combinations

KAUST Repository

Zhou, Liang; Schott, Mathias; Hansen, Charles

2012-01-01

Direct volume rendering has been an active area of research for over two decades. Transfer function design remains a difficult task since current methods, such as traditional 1D and 2D transfer functions, are not always effective for all data sets. Various 1D or 2D transfer function spaces have been proposed to improve classification exploiting different aspects, such as using the gradient magnitude for boundary location and statistical, occlusion, or size metrics. In this paper, we present a novel transfer function method which can provide more specificity for data classification by combining different transfer function spaces. In this work, a 2D transfer function can be combined with 1D transfer functions which improve the classification. Specifically, we use the traditional 2D scalar/gradient magnitude, 2D statistical, and 2D occlusion spectrum transfer functions and combine these with occlusion and/or size-based transfer functions to provide better specificity. We demonstrate the usefulness of the new method by comparing to the following previous techniques: 2D gradient magnitude, 2D occlusion spectrum, 2D statistical transfer functions and 2D size based transfer functions. © 2012 Elsevier Ltd.

Transfer function combinations

KAUST Repository

Zhou, Liang

2012-10-01

Direct volume rendering has been an active area of research for over two decades. Transfer function design remains a difficult task since current methods, such as traditional 1D and 2D transfer functions, are not always effective for all data sets. Various 1D or 2D transfer function spaces have been proposed to improve classification exploiting different aspects, such as using the gradient magnitude for boundary location and statistical, occlusion, or size metrics. In this paper, we present a novel transfer function method which can provide more specificity for data classification by combining different transfer function spaces. In this work, a 2D transfer function can be combined with 1D transfer functions which improve the classification. Specifically, we use the traditional 2D scalar/gradient magnitude, 2D statistical, and 2D occlusion spectrum transfer functions and combine these with occlusion and/or size-based transfer functions to provide better specificity. We demonstrate the usefulness of the new method by comparing to the following previous techniques: 2D gradient magnitude, 2D occlusion spectrum, 2D statistical transfer functions and 2D size based transfer functions. © 2012 Elsevier Ltd.

Effect of air bubble localization after transfer on embryo transfer outcomes.

Science.gov (United States)

Tiras, Bulent; Korucuoglu, Umit; Polat, Mehtap; Saltik, Ayse; Zeyneloglu, Hulusi Bulent; Yarali, Hakan

2012-09-01

Our study aimed to provide information about the effects of air bubble localization after transfer on embryo transfer outcomes. Retrospective analysis of 7489 ultrasound-guided embryo transfers. Group 1 included 6631 embryo transfers in which no movement of the air bubbles was observed after transfer. Group 2 consisted of 407 embryo transfers in which the air bubbles moved towards the uterine fundus spontaneously, a little time after transfer. Group 3 included 370 embryo transfers in which the air bubbles moved towards the uterine fundus with ejection, immediately after transfer. Group 4 consisted of 81 embryo transfers in which the air bubbles moved towards the cervical canal. The four patient groups were different from one another with respect to positive pregnancy tests. Post hoc test revealed that this difference was between group 4 and other groups. An initial finding of our study was significantly decreased positive pregnancy test rates and clinical pregnancy rates with air bubbles moving towards the cervical canal after transfer. Although air bubbles moving towards the uterine fundus with ejection were associated with higher pregnancy rates, higher miscarriage rates and similar live birth rates were observed compared to air bubbles remaining stable after transfer. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Transfer Pricing

DEFF Research Database (Denmark)

Nielsen, Søren Bo

2014-01-01

Against a background of rather mixed evidence about transfer pricing practices in multinational enterprises (MNEs) and varying attitudes on the part of tax authorities, this paper explores how multiple aims in transfer pricing can be pursued across four different transfer pricing regimes. A MNE h...

Cryogenic heat transfer

CERN Document Server

Barron, Randall F

2016-01-01

Cryogenic Heat Transfer, Second Edition continues to address specific heat transfer problems that occur in the cryogenic temperature range where there are distinct differences from conventional heat transfer problems. This updated version examines the use of computer-aided design in cryogenic engineering and emphasizes commonly used computer programs to address modern cryogenic heat transfer problems. It introduces additional topics in cryogenic heat transfer that include latent heat expressions; lumped-capacity transient heat transfer; thermal stresses; Laplace transform solutions; oscillating flow heat transfer, and computer-aided heat exchanger design. It also includes new examples and homework problems throughout the book, and provides ample references for further study.

Problems with multiple use of transfer buffer in protein electrophoretic transfer.

Science.gov (United States)

Dorri, Yaser; Kurien, Biji T; Scofield, R Hal

2010-04-01

Two-dimensional gel electrophoresis (2DE) and SDS-PAGE are the two most useful methods in protein separation. Proteins separated by 2DE or SDS-PAGE are usually transferred to membranes using a variety of methods, such as electrophoretic transfer, heat-mediated transfer, or nonelectrophoretic transfer, for specific protein detection and/or analysis. In a recent study, Pettegrew et al. claim to reuse transfer buffer containing methanol for at least five times for transferring proteins from SDS-PAGE to polyvinylidene difluoride. They add 150-200 ml fresh transfer solution each time for extended use as a result of loss of transfer buffer. Finally, they test efficiency of each protein transfer by chemiluminescence detection. Here, we comment on this report, as we believe this method is not accurate and useful for protein analysis, and it can cause background binding as well as inaccurate protein analysis.

Convective heat transfer

CERN Document Server

Kakac, Sadik; Pramuanjaroenkij, Anchasa

2014-01-01

Intended for readers who have taken a basic heat transfer course and have a basic knowledge of thermodynamics, heat transfer, fluid mechanics, and differential equations, Convective Heat Transfer, Third Edition provides an overview of phenomenological convective heat transfer. This book combines applications of engineering with the basic concepts of convection. It offers a clear and balanced presentation of essential topics using both traditional and numerical methods. The text addresses emerging science and technology matters, and highlights biomedical applications and energy technologies. What’s New in the Third Edition: Includes updated chapters and two new chapters on heat transfer in microchannels and heat transfer with nanofluids Expands problem sets and introduces new correlations and solved examples Provides more coverage of numerical/computer methods The third edition details the new research areas of heat transfer in microchannels and the enhancement of convective heat transfer with nanofluids....

To transfer or not to transfer? Kinematics and laterality quotient predict interlimb transfer of motor learning.

Science.gov (United States)

Lefumat, Hannah Z; Vercher, Jean-Louis; Miall, R Chris; Cole, Jonathan; Buloup, Frank; Bringoux, Lionel; Bourdin, Christophe; Sarlegna, Fabrice R

2015-11-01

Humans can remarkably adapt their motor behavior to novel environmental conditions, yet it remains unclear which factors enable us to transfer what we have learned with one limb to the other. Here we tested the hypothesis that interlimb transfer of sensorimotor adaptation is determined by environmental conditions but also by individual characteristics. We specifically examined the adaptation of unconstrained reaching movements to a novel Coriolis, velocity-dependent force field. Right-handed subjects sat at the center of a rotating platform and performed forward reaching movements with the upper limb toward flashed visual targets in prerotation, per-rotation (i.e., adaptation), and postrotation tests. Here only the dominant arm was used during adaptation and interlimb transfer was assessed by comparing performance of the nondominant arm before and after dominant-arm adaptation. Vision and no-vision conditions did not significantly influence interlimb transfer of trajectory adaptation, which on average was significant but limited. We uncovered a substantial heterogeneity of interlimb transfer across subjects and found that interlimb transfer can be qualitatively and quantitatively predicted for each healthy young individual. A classifier showed that in our study, interlimb transfer could be predicted based on the subject's task performance, most notably motor variability during learning, and his or her laterality quotient. Positive correlations suggested that variability of motor performance and lateralization of arm movement control facilitate interlimb transfer. We further show that these individual characteristics can predict the presence and the magnitude of interlimb transfer of left-handers. Overall, this study suggests that individual characteristics shape the way the nervous system can generalize motor learning. Copyright © 2015 the American Physiological Society.

Transference, counter-transference and repetition: some implications for nursing practice.

Science.gov (United States)

Jones, Alun C

2005-11-01

This discussion paper offers an introductory text for nurses and explores the psychoanalytic ideas of transference, counter-transference and repetition compulsion. Disguised case vignettes provide illustrations of the ideas as they might apply to nursing, including professional practice and occupational choice. The literature suggests that transference can be a source of creativity as well as destructiveness and influence important communications with oneself and others including the choice of nursing and other health professions as an occupation. Recognizing possibilities of transference, counter-transference along with repetitive patterns of behaviours, can help nurses of all specialities to address situations constructively by responding thoughtfully and appropriately. This discussion concludes with the suggestions that we know little about the motivational factors underlying nursing as an occupational preference; moreover, nursing does not have a culture of personal therapy. As such nurses are denied opportunities to understand the possible reasons underlying their occupational choice or gain experiential knowledge of interpersonal dynamics occurring between patients and colleagues. Transference and counter-transference are thought to have some bearing on all relationships. Forming a natural part of the way human beings relate to each other, transference and counter-transference can bring about sincere human interest, caring and concern. However, there is also potential for disagreements. Recognizing the possible origins of relational difficulties can offer opportunities for professional development to nurses along with the benefits for health service users.

Study of mode locking in a microwave-pumped diode laser close to the generation threshold

International Nuclear Information System (INIS)

Bagaev, Sergei N; Zakharyash, Valerii F; Kashirsky, Aleksandr V; Klementyev, Vasilii M; Kuznetsov, Sergei A; Pivtsov, V S

2004-01-01

Active mode locking is studied in a diode laser with a three-mirror resonator upon the microwave modulation of the pump current. The mode-locking region with the minimal width of the spectrum of intermode beats is found, when the microwave frequency is close to the intermode frequency of an external resonator. This region is shown to be located close to the threshold pump current. (lasers, active media)

Transfer Pricing

DEFF Research Database (Denmark)

Rohde, Carsten; Rossing, Christian Plesner

trade internally as the units have to decide what prices should be paid for such inter-unit transfers. One important challenge is to uncover the consequences that different transfer prices have on the willingness in the organizational units to coordinate activities and trade internally. At the same time...... the determination of transfer price will affect the size of the profit or loss in the organizational units and thus have an impact on the evaluation of managers‟ performance. In some instances the determination of transfer prices may lead to a disagreement between coordination of the organizational units...

Waste Transfer Stations

DEFF Research Database (Denmark)

Christensen, Thomas Højlund

2011-01-01

tion and transport is usually the most costly part of any waste management system; and when waste is transported over a considerable distance or for a long time, transferring the waste from the collection vehicles to more efficient transportation may be economically beneficial. This involves...... a transfer station where the transfer takes place. These stations may also be accessible by private people, offering flexibility to the waste system, including facilities for bulky waste, household hazardous waste and recyclables. Waste transfer may also take place on the collection route from small...... describes the main features of waste transfer stations, including some considerations about the economical aspects on when transfer is advisable....

Resource Transfers to the Elderly: Do Adult Children Substitute Financial Transfers for Time Transfers

National Research Council Canada - National Science Library

Zissimopoulos, Julie

2001-01-01

Using the Health and Retirement Study, this research investigates whether an adult child substitutes financial transfers to an elderly parent for time transfers as the cost of his or her time increases...

Heat transfer: Pittsburgh 1987

International Nuclear Information System (INIS)

Lyczkowski, R.W.

1987-01-01

This book contains papers divided among the following sections: Process Heat Transfer; Thermal Hydraulics and Phase Change Phenomena; Analysis of Multicomponent Multiphase Flow and Heat Transfer; Heat Transfer in Advanced Reactors; General Heat Transfer in Solar Energy; Numerical Simulation of Multiphase Flow and Heat Transfer; High Temperature Heat Transfer; Heat Transfer Aspects of Severe Reactor Accidents; Hazardous Waste On-Site Disposal; and General Papers

Transfer closed and transfer open multimaps in minimal spaces

International Nuclear Information System (INIS)

Alimohammady, M.; Roohi, M.; Delavar, M.R.

2009-01-01

This paper is devoted to introduce the concepts of transfer closed and transfer open multimaps in minimal spaces. Also, some characterizations of them are considered. Further, the notion of minimal local intersection property will be introduced and characterized. Moreover, some maximal element theorems via minimal transfer closed multimaps and minimal local intersection property are given.

Transfer

DEFF Research Database (Denmark)

Wahlgren, Bjarne; Aarkrog, Vibe

Bogen er den første samlede indføring i transfer på dansk. Transfer kan anvendes som praksis-filosofikum. Den giver en systematisk indsigt til den studerende, der spørger: Hvordan kan teoretisk viden bruges til at reflektere over handlinger i situationer, der passer til min fremtidige arbejdsplads?...

Electron transfer reactions

CERN Document Server

Cannon, R D

2013-01-01

Electron Transfer Reactions deals with the mechanisms of electron transfer reactions between metal ions in solution, as well as the electron exchange between atoms or molecules in either the gaseous or solid state. The book is divided into three parts. Part 1 covers the electron transfer between atoms and molecules in the gas state. Part 2 tackles the reaction paths of oxidation states and binuclear intermediates, as well as the mechanisms of electron transfer. Part 3 discusses the theories and models of the electron transfer process; theories and experiments involving bridged electron transfe

Fuel transfer machine

International Nuclear Information System (INIS)

Bernstein, I.

1978-01-01

A nuclear fuel transfer machine for transferring fuel assemblies through the fuel transfer tube of a nuclear power generating plant containment structure is described. A conventional reversible drive cable is attached to the fuel transfer carriage to drive it horizontally through the tube. A shuttle carrying a sheave at each end is arranged in parallel with the carriage to also travel into the tube. The cable cooperating with the sheaves permit driving a relatively short fuel transfer carriage a large distance without manually installing sheaves or drive apparatus in the tunnel. 8 claims, 3 figures

Heat transfer system

Science.gov (United States)

Not Available

1980-03-07

A heat transfer system for a nuclear reactor is described. Heat transfer is accomplished within a sealed vapor chamber which is substantially evacuated prior to use. A heat transfer medium, which is liquid at the design operating temperatures, transfers heat from tubes interposed in the reactor primary loop to spaced tubes connected to a steam line for power generation purposes. Heat transfer is accomplished by a two-phase liquid-vapor-liquid process as used in heat pipes. Condensible gases are removed from the vapor chamber through a vertical extension in open communication with the chamber interior.

Technology transfer by multinationals

OpenAIRE

Kostyantyn Zuzik

2003-01-01

The paper analyses the issue of technology transfer by multinational corporations. The following questions are explored: (a) world market of technologies, the role of MNCs (b) Choice of the technology transfer mode, Dunning's OLI-theory as a factor of the choice of the mode of transfer (c) measurement and profitability of technology transfer (d) transfer of technology through partnerships, JVs, alliances and through M&As (e) aspects of technology transfer by services multinationals. Paper uti...

Technology transfer 1994

Energy Technology Data Exchange (ETDEWEB)

1994-01-01

This document, Technology Transfer 94, is intended to communicate that there are many opportunities available to US industry and academic institutions to work with DOE and its laboratories and facilities in the vital activity of improving technology transfer to meet national needs. It has seven major sections: Introduction, Technology Transfer Activities, Access to Laboratories and Facilities, Laboratories and Facilities, DOE Office, Technologies, and an Index. Technology Transfer Activities highlights DOE`s recent developments in technology transfer and describes plans for the future. Access to Laboratories and Facilities describes the many avenues for cooperative interaction between DOE laboratories or facilities and industry, academia, and other government agencies. Laboratories and Facilities profiles the DOE laboratories and facilities involved in technology transfer and presents information on their missions, programs, expertise, facilities, and equipment, along with data on whom to contact for additional information on technology transfer. DOE Offices summarizes the major research and development programs within DOE. It also contains information on how to access DOE scientific and technical information. Technologies provides descriptions of some of the new technologies developed at DOE laboratories and facilities.

Heat transfer

Indian Academy of Sciences (India)

First page Back Continue Last page Overview Graphics. Heat transfer. Heat conduction in solid slab. Convective heat transfer. Non-linear temperature. variation due to flow. HEAT FLUX AT SURFACE. conduction/diffusion.

Transfer Climate and EAP Education: Students Perceptions of Challenges to Learning Transfer

Science.gov (United States)

James, Mark Andrew

2010-01-01

This study examined the applicability of the construct transfer climate in EAP education. In an EAP setting, transfer climate can be viewed as the support for learning transfer from an EAP course that students perceive in mainstream academic courses. The research question was as follows: What can a transfer climate perspective reveal about…

Optical Control of Mechanical Mode-Coupling within a MoS2 Resonator in the Strong-Coupling Regime.

Science.gov (United States)

Liu, Chang-Hua; Kim, In Soo; Lauhon, Lincoln J

2015-10-14

Two-dimensional (2-D) materials including graphene and transition metal dichalcogenides (TMDs) are an exciting platform for ultrasensitive force and displacement detection in which the strong light-matter coupling is exploited in the optical control of nanomechanical motion. Here we report the optical excitation and displacement detection of a ∼ 3 nm thick MoS2 resonator in the strong-coupling regime, which has not previously been achieved in 2-D materials. Mechanical mode frequencies can be tuned by more than 12% by optical heating, and they exhibit avoided crossings indicative of strong intermode coupling. When the membrane is optically excited at the frequency difference between vibrational modes, normal mode splitting is observed, and the intermode energy exchange rate exceeds the mode decay rate by a factor of 15. Finite element and analytical modeling quantifies the extent of mode softening necessary to control intermode energy exchange in the strong coupling regime.

Analysis of Heat Transfer

International Nuclear Information System (INIS)

2003-08-01

This book deals with analysis of heat transfer which includes nonlinear analysis examples, radiation heat transfer, analysis of heat transfer in ANSYS, verification of analysis result, analysis of heat transfer of transition with automatic time stepping and open control, analysis of heat transfer using arrangement of ANSYS, resistance of thermal contact, coupled field analysis such as of thermal-structural interaction, cases of coupled field analysis, and phase change.

Making benefit transfers work

DEFF Research Database (Denmark)

Bateman, I.J.; Brouwer, R.; Ferrini, S.

We develop and test guidance principles for benefits transfers. These argue that when transferring across relatively similar sites, simple mean value transfers are to be preferred but that when sites are relatively dissimilar then value function transfers will yield lower errors. The paper also...... provides guidance on the appropriate specification of transferable value functions arguing that these should be developed from theoretical rather than ad-hoc statistical principles. These principles are tested via a common format valuation study of water quality improvements across five countries. Results...... support our various hypotheses providing a set of principles for future transfer studies. The application also considers new ways of incorporating distance decay, substitution and framing effects within transfers and presents a novel water quality ladder....

Basic heat transfer

CERN Document Server

Bacon, D H

2013-01-01

Basic Heat Transfer aims to help readers use a computer to solve heat transfer problems and to promote greater understanding by changing data values and observing the effects, which are necessary in design and optimization calculations.The book is concerned with applications including insulation and heating in buildings and pipes, temperature distributions in solids for steady state and transient conditions, the determination of surface heat transfer coefficients for convection in various situations, radiation heat transfer in grey body problems, the use of finned surfaces, and simple heat exc

Intramolecular Energy Transfer, Charge Transfer & Hydrogen Bond

Indian Academy of Sciences (India)

Ultrafast Dynamics of Chemical Reactions in Condensed Phase: Intramolecular Energy Transfer, Charge Transfer & Hydrogen Bond · PowerPoint Presentation · Slide 3 · Slide 4 · Slide 5 · Slide 6 · Slide 7 · Slide 8 · Slide 9 · Slide 10 · Slide 11 · Slide 12 · Slide 13 · Slide 14 · Slide 15 · Slide 16 · Slide 17 · Slide 18 · Slide 19.

Wireless adiabatic power transfer

International Nuclear Information System (INIS)

Rangelov, A.A.; Suchowski, H.; Silberberg, Y.; Vitanov, N.V.

2011-01-01

Research highlights: → Efficient and robust mid-range wireless energy transfer between two coils. → The adiabatic energy transfer is analogous to adiabatic passage in quantum optics. → Wireless energy transfer is insensitive to any resonant constraints. → Wireless energy transfer is insensitive to noise in the neighborhood of the coils. - Abstract: We propose a technique for efficient mid-range wireless power transfer between two coils, by adapting the process of adiabatic passage for a coherently driven two-state quantum system to the realm of wireless energy transfer. The proposed technique is shown to be robust to noise, resonant constraints, and other interferences that exist in the neighborhood of the coils.

Εξέλιξη του ρόλου των dry ports

OpenAIRE

Μπότσα, Αικατερίνη

2016-01-01

When the term dry port is used nowadays, what interested parties actually refer to, is “a seaport directly connected by rail to inland intermodal terminals, where shippers can leave and/or collect their goods in intermodal loading units as if directly at the seaport”1. This paper shall present how dry ports have evolved in recent years, always with a view to improve and accommodate the shipping and logistic industries’ needs and requirements. The purpose that is served, is to s...

Single-embryo transfer versus multiple-embryo transfer.

Science.gov (United States)

Gerris, Jan

2009-01-01

Despite the progress made in assisted reproductive technology, live birth rates remain disappointingly low. Multiple-embryo transfer has been an accepted practice with which to increase the success rate. This has led to a higher incidence of multiple-order births compared with natural conception, which not only increase the risk of mortality and morbidity to both mother and children but are also associated with social and economic consequences. Elective single-embryo transfer (eSET) was developed in an effort to increase singleton pregnancies in assisted reproduction. Studies comparing eSET with multiple-embryo transfer highlight the benefit of this approach and suggest that, with careful patient selection and the transfer of good-quality embryos, the risk of a multiple-order pregnancy can be reduced without significantly decreasing live birth rates. Although the use of eSET has gradually increased in clinical practice, its acceptance has been limited by factors such as availability of funding and awareness of the procedure. An open discussion of eSET is warranted in an effort to enable a broader understanding by physicians and patients of the merits of this approach. Ultimately, eSET may provide a more cost-effective, potentially safer approach to patients undergoing assisted reproduction technology.

To transfer or not to transfer? Evidence from validity and reliability tests for international transfers of non-market adaptation benefits in river basins.

Science.gov (United States)

Andreopoulos, Dimitrios; Damigos, Dimitrios

2017-01-01

The attempt to design cost-effective adaptation policies incorporating non-market values to inhibit climate change impacts on water resources may increase the interest in applying the Benefit Transfer method. Benefit Transfer is a practical way to consider non-market values using functions and estimates acquired through primary valuation methods from other sites. Among the primary methods, Choice Experiments appear to particularly accommodate Benefit Transfer. Nevertheless, validity and reliability of international value transfers obtained from Choice Experiments have not been adequately examined. To this end, two identical Choice Experiments were conducted in Greece and Italy in the context of river services adaptation, testing validity and reliability of Benefit Transfer. The application of validity and reliability tests for different types of transfers is supportive for the use of Benefit Transfer, at least for the value transfer types. In particular the reliability of value transfer was higher when income adjustments were taken into account. Overall, Benefit Transfer can be attentively considered to evaluate cost-effective adaptation policies across countries experiencing similar climate change trends. The latter gains more importance given that an international Benefit Transfer setting as regards the non-market benefits of adaptation to climate change for river services is absent in the relevant literature. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Identification of emotions in patients with low-grade gliomas versus cerebrovascular accidents].

Science.gov (United States)

du Boullay, V; Plaza, M; Capelle, L; Chaby, L

2013-03-01

Facial and vocal emotions contribute to sustain efficient social relationships. Brain disease may impair their identification. In the case of slow-growth tumors (Low Grade Gliomas [LGG]) or sudden stroke (cerebrovascular accidents [CVA]), the lesions induce contrasted plasticity and reorganisation processes. We compared the facial, vocal and intermodal identification of six emotions (happiness, fear, angriness, sadness, disgust and neutral) of three groups: patients with LGG before and after tumor resection, patients with CVA and control subjects. In LGG patients, the results revealed less efficient performances after tumor resection and in CVA patients weak performances regarding negative emotions. The intermodal condition (simultaneous visual and vocal association) improved performances in all groups and enabled equivalent performance in CVA subjects compared with control subjects. The intergroup differences may be related to variable brain plasticity as a function of type and rapidity of brain injury. Intermodal processing appears to be a compensatory condition. Copyright © 2012. Published by Elsevier Masson SAS.

Exploring the Critical Role of Motivation to Transfer in the Training Transfer Process

Science.gov (United States)

Grohmann, Anna; Beller, Johannes; Kauffeld, Simone

2014-01-01

The present study aims at exploring the critical role of motivation to transfer within the training transfer process. In a sample of N?=?252 employees of one industrial company, one peer rating and several self-ratings of transfer were used to investigate the mediating role of motivation to transfer in the relationship between training…

Radiative heat transfer

CERN Document Server

Modest, Michael F

2013-01-01

The third edition of Radiative Heat Transfer describes the basic physics of radiation heat transfer. The book provides models, methodologies, and calculations essential in solving research problems in a variety of industries, including solar and nuclear energy, nanotechnology, biomedical, and environmental. Every chapter of Radiative Heat Transfer offers uncluttered nomenclature, numerous worked examples, and a large number of problems-many based on real world situations-making it ideal for classroom use as well as for self-study. The book's 24 chapters cover the four major areas in the field: surface properties; surface transport; properties of participating media; and transfer through participating media. Within each chapter, all analytical methods are developed in substantial detail, and a number of examples show how the developed relations may be applied to practical problems. It is an extensive solution manual for adopting instructors. Features: most complete text in the field of radiative heat transfer;...

Radioecology. Transfers of radioelements

International Nuclear Information System (INIS)

Foulquier, L.

2002-01-01

The study of the cycle of radioelements in the environment requires the measurement of the radionuclides present in all parts of the ecosystems. The knowledge of the mechanisms of radioactive pollutant transfers and of the kinetics of the exchanges between a source term, the vectors and the constituents of the biosphere represents heart of the work of radio-ecologists. This article describes briefly the techniques used for the measurement of radionuclides in the environment and for the study of their physical dispersion mechanisms. Then, it treats more carefully of the transfer mechanisms in different environments: 1 - tools for the evaluation of transfers: metrology, atmospheric and liquid dispersion phenomena; 2 - processes of radioelement transfers: transfers in aquatic ecosystems, transfers in terrestrial environment. (J.S.)

Heat transfer fluids containing nanoparticles

Science.gov (United States)

Singh, Dileep; Routbort, Jules; Routbort, A.J.; Yu, Wenhua; Timofeeva, Elena; Smith, David S.; France, David M.

2016-05-17

A nanofluid of a base heat transfer fluid and a plurality of ceramic nanoparticles suspended throughout the base heat transfer fluid applicable to commercial and industrial heat transfer applications. The nanofluid is stable, non-reactive and exhibits enhanced heat transfer properties relative to the base heat transfer fluid, with only minimal increases in pumping power required relative to the base heat transfer fluid. In a particular embodiment, the plurality of ceramic nanoparticles comprise silicon carbide and the base heat transfer fluid comprises water and water and ethylene glycol mixtures.

Photoelectric transfer device

Energy Technology Data Exchange (ETDEWEB)

Shinomiya, Takuji; Murao, Fumihide

1987-12-07

Concerning the conventional photoelectric transfer device, a short-circuit current of photodiodes is switched over with MOS transistors. However, since the backgate voltage of the MOS transistor which is to be used as the switching element, is provided by the source voltage, the leakage current between the backgate and the source/drain/ channel is great and due to this leakage current, errors occur in the photoelectric transfer power output. Especially, when the leakage current of the photodiodes is small, the error becomes large. In order to solve the above problem, this invention aims at offering a photoelectric transfer device which can provide the high precision photoelectric transfer even the short-circuit current generated in the photodiodes is small and proposes a photoelectric transfer device in which the backgate voltage of the MOS transistor switching over the short-circuit current of the photodiodes is made equal to the electric potential of the mutually connected anodes (or cathodes) of the photodiodes. (3 figs)

Near field wireless power transfer using curved relay resonators for extended transfer distance

International Nuclear Information System (INIS)

Zhu, D; Beeby, S P; Clare, L; Stark, B H

2015-01-01

This paper investigates the performance of a near field wireless power transfer system that uses curved relay resonator to extend transfer distance. Near field wireless power transfer operates based on the near-field electromagnetic coupling of coils. Such a system can transfer energy over a relatively short distance which is of the same order of dimensions of the coupled coils. The energy transfer distance can be increased using flat relay resonators. Recent developments in printing electronics and e-textiles have seen increasing demand of embedding electronics into fabrics. Near field wireless power transfer is one of the most promising methods to power electronics on fabrics. The concept can be applied to body-worn textiles by, for example, integrating a transmitter coil into upholstery, and a flexible receiver coil into garments. Flexible textile coils take on the shape of the supporting materials such as garments, and therefore curved resonator and receiver coils are investigated in this work. Experimental results showed that using curved relay resonator can effectively extend the wireless power transfer distance. However, as the curvature of the coil increases, the performance of the wireless power transfer, especially the maximum received power, deteriorates. (paper)

Heat transfer bibliography: russian works

Energy Technology Data Exchange (ETDEWEB)

Luikov, A V

1965-02-01

This bibliography of recent Russian publications in heat transfer is divided into the following categories: (1) books; (2) general; (3) experimental methods; (4) analytical calculation methods; (5) thermodynamics; (6) transfer processes involving phase conversions; ((7) transfer processes involving chemical conversions; (8) transfer processes involving very high velocities; (9) drying processes; (10) thermal properties of various materials, heat transfer agents and their determination methods; (11) high temperature physics and magneto- hydrodynamics; and (12) transfer processes in technological apparatuses. (357 refs.)

Expert Performance Transfer - Making Knowledge Transfer Count with ExPerT Methodology

International Nuclear Information System (INIS)

Turner, C.L.; Braudt, T.E.

2011-01-01

'Knowledge Transfer' is a high-priority imperative as the nuclear industry faces the combined effects of an aging workforce and economic pressures to do more with less. Knowledge Transfer is only a part of the solution to these challenges, however. The more compelling and immediate need faced by industry is Accomplishment Transfer, or the transference of the applied knowledge necessary to assure optimal performance transfer from experienced, high-performing staff to inexperienced staff. A great deal of industry knowledge and required performance information has been documented in the form of procedures. Often under-appreciated either as knowledge stores or as drivers of human performance, procedures, coupled with tightly-focused and effective training, are arguably the most effective influences on human and plant performance. (author)

Dexter energy transfer pathways.

Science.gov (United States)

Skourtis, Spiros S; Liu, Chaoren; Antoniou, Panayiotis; Virshup, Aaron M; Beratan, David N

2016-07-19

Energy transfer with an associated spin change of the donor and acceptor, Dexter energy transfer, is critically important in solar energy harvesting assemblies, damage protection schemes of photobiology, and organometallic opto-electronic materials. Dexter transfer between chemically linked donors and acceptors is bridge mediated, presenting an enticing analogy with bridge-mediated electron and hole transfer. However, Dexter coupling pathways must convey both an electron and a hole from donor to acceptor, and this adds considerable richness to the mediation process. We dissect the bridge-mediated Dexter coupling mechanisms and formulate a theory for triplet energy transfer coupling pathways. Virtual donor-acceptor charge-transfer exciton intermediates dominate at shorter distances or higher tunneling energy gaps, whereas virtual intermediates with an electron and a hole both on the bridge (virtual bridge excitons) dominate for longer distances or lower energy gaps. The effects of virtual bridge excitons were neglected in earlier treatments. The two-particle pathway framework developed here shows how Dexter energy-transfer rates depend on donor, bridge, and acceptor energetics, as well as on orbital symmetry and quantum interference among pathways.

Energy transfer in plasmonic systems

International Nuclear Information System (INIS)

Pustovit, Vitaliy N; Urbas, Augustine M; Shahbazyan, Tigran V

2014-01-01

We present our results on energy transfer between donor and acceptor molecules or quantum dots near a plasmonic nanoparticle. In such systems, the Förster resonance energy transfer is strongly modified due to plasmon-mediated coupling between donors and acceptors. The transfer efficiency is determined by a competition between transfer, radiation and dissipation that depends sensitively on system parameters. When donor and accepror spectral bands overlap with dipole surface plasmon resonance, the dominant transfer mechanism is through plasmon-enhanced radiative coupling. When transfer takes place from an ensemble of donors to an acceptor, a cooperative amplification of energy transfer takes place in a wide range of system parameters. (paper)

Introduction to heat transfer

CERN Document Server

SUNDÉN, B

2012-01-01

Presenting the basic mechanisms for transfer of heat, Introduction to Heat Transfer gives a deeper and more comprehensive view than existing titles on the subject. Derivation and presentation of analytical and empirical methods are provided for calculation of heat transfer rates and temperature fields as well as pressure drop. The book covers thermal conduction, forced and natural laminar and turbulent convective heat transfer, thermal radiation including participating media, condensation, evaporation and heat exchangers.

Transfer and Social Practice.

Science.gov (United States)

Billett, Stephen

1998-01-01

Transfer involves disembodying knowledge and transferring it for use in different contexts. Vocational knowledge arises in communities of practice, and difficulties arise in transferring it from one distinct community, such as a workplace, to another, such as a classroom. (SK)

ANALISIS PERILAKU PENGGUNA ANGKUTAN UMUM TRANSPORTASI ANTARMODA

Directory of Open Access Journals (Sweden)

Y. I. Wicaksono

2014-10-01

Full Text Available [Title: Analysis of User Behaviour for Public Transport Special for Intermodes Transportation]In traveling, each rider will choose the route that gives the minimum fare. The journey can be expressed in terms of monetary cost, travel time, distance, safety, comfort, and cost is not borne by the traveler (social cost. Attributes are specific to each road segment (link, so it can’t be aggregated for a more long. Attribute segment in transport modeling approach behavior (behavioral, including 2 primary system, the system of activity attributes and attribute the traveler service systems. Pretty much the traveler who wants to use mass transit intermodal transportation. This research was conducted in the city of Semarang Metropolitan Indonesia: identify the purpose and perception of public transport user behavior on the network and create a model for inter-user behavior on public transport intermodal network. The combined value of the coeffient of determination of the overall model is 0.931. This means that the model is able to explain 93.1% inter-user behaviour. Behavioural characteristic of users of public transport in the intermodal network in the form of the number of activities that a lot, have enough users mature age, education level is high enough, is not associated with gender, the limitations of private vehicle ownwership. Perception of public transport user behaviior on the network inter-linked with the comfort, safety, convenience, capacity, quality and quantity of good network, resonable travel expenses, as well as interdiciplinary operator.

When Creativity Met Transfer: Increasing Creativity and Transfer by Controlling the Styles of Processing

Science.gov (United States)

Kaniel, Shlomo

2013-01-01

The primary purpose of this article is to combine both transfer of learning (hereafter, transfer) and creativity into similar processes that can increase the products of transfer and creativity. Both transfer and creativity operate within reciprocal relationships between memory storage and working memory. Moreover, they are also based on moving…

Non-Linear Fibres for Widely Tunable Femtosecond Fibre Lasers

DEFF Research Database (Denmark)

Pedersen, Martin Erland Vestergaard

and numerically. For the intermodal four-wave mixing experiment an alternative version of the Generalised Non-Linear Schrödinger Equation is derived, which includes the correct dispersion of the transverse field. It is observed that the alternative version of the Generalised Non-Linear Schrödinger Equation......, as opposed to the commonly used version, is able to reproduce the intermodal four-wave mixing experiment. The relation between the intramodal self-phase modulation and the intramodal Raman effect is determined from experimental measurements on a number of step-index fibres. The Raman fraction is found...

A Door-to-Door Combined Transport Planner

DEFF Research Database (Denmark)

Aastrup, Jesper; Jespersen, Per Homann; Pedersen, Michael B.

2004-01-01

Establishing a web-based portal functioning as a one-stop-shop for transport buyers is a radical idea of a consumer oriented intermodal freight system. This utopian vision will be materialized in a system description and a prototype of a Door-to-Door Combined Trans-port Planner (COTRAP), developed......- and inter-organizational barriers to the establishment of a competitive and effective combined transport system with rail freight operators as the intermodal integrator. In this paper we describes the ideas and methodology behind the project, as well as some preliminary results....

Gas transfer system

International Nuclear Information System (INIS)

Oberlin, J.C.; Frick, G.; Kempfer, C.; North, C.

1988-09-01

The state of work on the Vivitron gas transfer system and the system functions are summarized. The system has to: evacuate the Vivitron reservoir; transfer gas from storage tanks to the Vivitron; recirculate gas during operation; transfer gas from the Vivitron to storage tanks; and assure air input. The system is now being installed. Leak alarms are given by SF6 detectors, which set off a system of forced ventilation. Another system continuously monitors the amount of SF6 in the tanks [fr

Bulk Data Movement for Climate Dataset: Efficient Data Transfer Management with Dynamic Transfer Adjustment

International Nuclear Information System (INIS)

Sim, Alexander; Balman, Mehmet; Williams, Dean; Shoshani, Arie; Natarajan, Vijaya

2010-01-01

Many scientific applications and experiments, such as high energy and nuclear physics, astrophysics, climate observation and modeling, combustion, nano-scale material sciences, and computational biology, generate extreme volumes of data with a large number of files. These data sources are distributed among national and international data repositories, and are shared by large numbers of geographically distributed scientists. A large portion of data is frequently accessed, and a large volume of data is moved from one place to another for analysis and storage. One challenging issue in such efforts is the limited network capacity for moving large datasets to explore and manage. The Bulk Data Mover (BDM), a data transfer management tool in the Earth System Grid (ESG) community, has been managing the massive dataset transfers efficiently with the pre-configured transfer properties in the environment where the network bandwidth is limited. Dynamic transfer adjustment was studied to enhance the BDM to handle significant end-to-end performance changes in the dynamic network environment as well as to control the data transfers for the desired transfer performance. We describe the results from the BDM transfer management for the climate datasets. We also describe the transfer estimation model and results from the dynamic transfer adjustment.

Industrial technology transfer

International Nuclear Information System (INIS)

Bulger, W.

1982-06-01

The transfer of industrial technology is an essential part of the CANDU export marketing program. Potential customers require the opportunity to become self-sufficient in the supply of nuclear plant and equipment in the long term and they require local participation to the maximum extent possible. The Organization of CANDU Industries is working closely with Atomic Energy of Canada Ltd. in developing comprehensive programs for the transfer of manufacturing technology. The objectives of this program are: 1) to make available to the purchasing country all nuclear component manufacturing technology that exists in Canada; and 2) to assure that the transfer of technology takes place in an efficient and effective way. Technology transfer agreements may be in the form of joint ventures or license agreements, depending upon the requirements of the recipient

Transferência e complexo de édipo, na obra de Freud: notas sobre os destinos da transferência Transference and oedipus complex, within Freud's theory: notes about the transference destiny

Directory of Open Access Journals (Sweden)

Lara Cristina d'Avila Lourenço

2005-04-01

Full Text Available Este artigo comunica algumas considerações sobre o conceito de transferência, na teoria freudiana. Especial atenção é voltada para as relações entre transferência, complexo de Édipo e complexo de castração. Partindo dessas relações e da hipótese segundo a qual Freud não apresenta um final possível para o complexo de Édipo, o presente trabalho entende que esse autor não fornece uma teoria sobre o final da transferência. Esse pensamento evoca o impasse freudiano em relação aos términos das análises. Nesse ponto, é feita uma breve referência à teoria lacaniana sobre a castração e a transferência ao final de análise.This article discloses some considerations about the transference conception situated within Freud's theory. The relations between transference, Oedipus complex and castration complex are highlighted. Starting from these relations and from the allegedly in wich Freud doesn't reveal a possible ending to Oedipus complex, this current work perceives that this author does not provide a theory about the transference ending. This idea drives into Freud's impasse, as far as the analysis ending is concerned. In this issue, a short reference is produced on Lacan's castration theory and on that of the transference at end of the analysis.

Junctional transfer in cultured vascular endothelium: II. Dye and nucleotide transfer

International Nuclear Information System (INIS)

Larson, D.M.; Sheridan, J.D.

1985-01-01

Vascular endothelial cultures, derived from large vessels, retain many of the characteristics of their in vivo counterparts. However, the observed reduction in size and complexity of intercellular gap and tight junctions in these cultured cells suggests that important functions, thought to be mediated by these structures, may be altered in vitro. In continuing studies on intercellular communication in vessel wall cells, the authors have quantitated the extent of junctional transfer of small molecular tracers (the fluorescent dye Lucifer Yellow CH and tritiated uridine nucleotides) in confluent cultures of calf aortic (BAEC) and umbilical vein (BVEC) endothelium. Both BAEC and BVEC show extensive (and quantitatively equivalent) dye and nucleotide transfer. As an analogue of intimal endothelium, the authors have also tested dye transfer in freshly isolated sheets of endothelium. Transfer in BAEC and BVEC sheets was more rapid, extensive and homogeneous than in the cultured cells, implying a reduction in molecular coupling as endothelium adapts to culture conditions. In addition, they have documented heterocellular nucleotide transfer between cultured endothelium and vascular smooth muscle cells, of particular interest considering the prevalence of ''myo-endothelial'' junctions in vivo. These data yield further information on junctional transfer in cultured vascular endothelium and have broad implications for the functional integration of the vessel wall in the physiology and pathophysiology of the vasculature

Technology Transfer

Science.gov (United States)

Smith, Nanette R.

1995-01-01

The objective of this summer's work was to attempt to enhance Technology Application Group (TAG) ability to measure the outcomes of its efforts to transfer NASA technology. By reviewing existing literature, by explaining the economic principles involved in evaluating the economic impact of technology transfer, and by investigating the LaRC processes our William & Mary team has been able to lead this important discussion. In reviewing the existing literature, we identified many of the metrics that are currently being used in the area of technology transfer. Learning about the LaRC technology transfer processes and the metrics currently used to track the transfer process enabled us to compare other R&D facilities to LaRC. We discuss and diagram impacts of technology transfer in the short run and the long run. Significantly, it serves as the basis for analysis and provides guidance in thinking about what the measurement objectives ought to be. By focusing on the SBIR Program, valuable information regarding the strengths and weaknesses of this LaRC program are to be gained. A survey was developed to ask probing questions regarding SBIR contractors' experience with the program. Specifically we are interested in finding out whether the SBIR Program is accomplishing its mission, if the SBIR companies are providing the needed innovations specified by NASA and to what extent those innovations have led to commercial success. We also developed a survey to ask COTR's, who are NASA employees acting as technical advisors to the SBIR contractors, the same type of questions, evaluating the successes and problems with the SBIR Program as they see it. This survey was developed to be implemented interactively on computer. It is our hope that the statistical and econometric studies that can be done on the data collected from all of these sources will provide insight regarding the direction to take in developing systematic evaluations of programs like the SBIR Program so that they can

Transfer of Training: A Reorganized Review on Work Environment and Motivation to Transfer

Directory of Open Access Journals (Sweden)

Imran Khan

2015-11-01

Full Text Available Effective application of skills & knowledge gained from a training program to a job situation, i.e. transfer of training, has become a great concern in training issues. Transfer of learned skills at the actual workplace is subject to a number of factors, with work environment being one of those factors. Research has shown a relatively profound role of the work environment in delineating the construct of transfer. However, some of the most important characteristics of the work environment have arguably remained under-researched and are still going empirical testing. So, in earnest, this paper is an attempt to make a holistic review of the literature and methodology by going through summative, formative and meta studies published from 1988–2014 on transfer. This paper proposes a conceptual framework by recognizing the influential role of two forms of work environments (i.e., support and climate on transfer of training, taking into account the mediating role played by transfer motivation with recommended methodological standards.

ASPECTS REGARDING THE SHARE TRANSFER

Directory of Open Access Journals (Sweden)

Cristina Cojocaru

2015-11-01

Full Text Available Throughout its content, the memorandum of association, even in the case of a limited liability company, stipulates the contribution of each shareholder to the share capital while the share capital is divided into shares, corresponding to the contribution of each shareholder to the share capital. The limited liability company is established in consideration of the people who set it up and as such, the share transfer is subject to certain conditions provided by law. Therefore, the law sets out strict conditions for share transfer in the case the transfer is done to one or more shareholders, but especially if the transfer is done to people outside the company, or following the inheritance. If the transfer is done to a shareholder, such is possible provided that this transfer has not been prohibited by the act of incorporation itself. Instead, the transfer to people outside the company cannot be done without the cons ent of shareholders representing at least three quarters of the capital. In case of share transfer by succession, the law allows it provided that this transfer is permitted within the memorandum of association .

Frozen-Thawed Embryo Transfer Cycles Have a Lower Incidence of Ectopic Pregnancy Compared With Fresh Embryo Transfer Cycles.

Science.gov (United States)

Zhang, Xinyu; Ma, Caihong; Wu, Zhangxin; Tao, Liyuan; Li, Rong; Liu, Ping; Qiao, Jie

2017-01-01

To evaluate the risk of ectopic pregnancy of embryo transfer. A retrospective cohort study on the incidence of ectopic pregnancy in fresh and frozen-thawed embryo transfer cycles from January 1 st , 2010, to January 1 st , 2015. Infertile women undergoing frozen-thawed transfer cycles or fresh transfer cycles. In-vitro fertilization, fresh embryo transfer, frozen-thawed embryo transfer, ectopic pregnancy. Ectopic pregnancy rate and clinical pregnancy rate. A total of 69 756 in vitro fertilization-embryo transfer cycles from 2010 to 2015 were analyzed, including 45 960 (65.9%) fresh and 23 796 (34.1%) frozen-thawed embryo transfer cycles. The clinical pregnancy rate per embryo transfer was slightly lower in fresh embryo transfer cycles compared with frozen-thawed embryo transfer cycles (40.8% vs 43.1%, P cycles, blastocyst transfer shows a significantly lower incidence of ectopic pregnancy (0.8% vs 1.8%, P = .002) in comparison with day 3 cleavage embryo transfer. The risk of ectopic pregnancy is lower in frozen-thawed embryo transfer cycles than fresh embryo transfer cycles, and blastocyst transfer could further decrease the ectopic pregnancy rate in frozen-thawed embryo transfer cycles.

Bivalve aquaculture transfers in Atlantic Europe. Part A: Transfer activities and legal framework

DEFF Research Database (Denmark)

Muehlbauer, F.; Fraser, D.; Brenner, M.

2014-01-01

environment and address economic considerations remains unanswered. This study provides the first overview of bivalve transfer activities for aquaculture purposes along the European Atlantic coast. Existing international and EU legislation is described, and potential weaknesses in the existing legislative......Intentional transfers of numerous bivalve species have had a long tradition and are commonly conducted along the European Atlantic coast. However numerous studies have concluded that intentional transfer of species for aquaculture purposes is one of the most principal vectors for the introduction...... frameworks are discussed. Recommendations for the development of integrated risk assessment methods are given. These may help to minimize the intrinsic threats of transfer activities in marine environments. The resulting impacts and effects of transfer activities of bivalves for aquaculture purpose...

Match properties of heat transfer and coupled heat and mass transfer processes in air-conditioning system

International Nuclear Information System (INIS)

Zhang Tao; Liu Xiaohua; Zhang Lun; Jiang Yi

2012-01-01

Highlights: ► Investigates match properties of heat or mass transfer processes in HVAC system. ► Losses are caused by limited transfer ability, flow and parameter mismatching. ► Condition of flow matching is the same heat capacity of the fluids. ► Parameter matching is only reached along the saturation line in air–water system. ► Analytical solutions of heat and mass transfer resistance are derived. - Abstract: Sensible heat exchangers and coupled heat and mass transfer devices between humid air and water/desiccant are commonly used devices in air-conditioning systems. This paper focuses on the match properties of sensible heat transfer processes and coupled heat and mass transfer processes in an effort to understand the reasons for performance limitations in order to optimize system performance. Limited heat transfer capability and flow mismatching resulted in heat resistance of the sensible heat transfer process. Losses occurred during the heat and mass transfer processes due to limited transfer capability, flow mismatching, and parameter mismatching. Flow matching was achieved when the heat capacities of the fluids were identical, and parameter matching could only be reached along the saturation line in air–water systems or the iso-concentration line in air–desiccant systems. Analytical solutions of heat transfer resistance and mass transfer resistance were then derived. The heat and mass transfer process close to the saturation line is recommended, and heating sprayed water resulted in better humidification performance than heating inlet air in the air humidifier.

Transference and oedipus complex, within Freud's theory: notes about the transference destiny / Transferência e complexo de édipo, na obra de Freud: notas sobre os destinos da transferência

Directory of Open Access Journals (Sweden)

Lara Cristina d'Avila Lourenço

2005-01-01

Full Text Available This article discloses some considerations about the transference conception situated within Freud's theory. The relations between transference, Oedipus complex and castration complex are highlighted. Starting from these relations and from the allegedly in wich Freud doesn't reveal a possible ending to Oedipus complex, this current work perceives that this author does not provide a theory about the transference ending. This idea drives into Freud's impasse, as far as the analysis ending is concerned. In this issue, a short reference is produced on Lacan's castration theory and on that of the transference at end of the analysis.

Knowledge transfer isn’t simply transfer

DEFF Research Database (Denmark)

Dao, Li; Napier, Nancy

2012-01-01

This paper examines micro dynamic aspects of knowledge sharing and learning in international joint venture settings. Learning of expatriate and local managers appears far more complex and mutually dependent than conventionally speculated in existing literature. The paper proposes that the effect ...... Danish and Vietnamese firms. The paper suggests that learning in IJVs, even in the context of one-way knowledge transfer from the foreign parent, should be managed in a mutual perspective and with thoughtful coordination of individual learning....... and outcome of knowledge transfer from joint venture parents and learning in IJVs are dependent on how individual managers (including both expatriate and local) learn, perceive their learning roles, and enact a learning agenda. Empirical evidence is drawn from two cases of international joint ventures between...

Advances in electron transfer chemistry

CERN Document Server

Mariano, Patrick S

1993-01-01

Advances in Electron Transfer Chemistry, Volume 3 presents studies that discuss findings in the various aspects of electron chemistry. The book is comprised of four chapters; each chapter reviews a work that tackles an issue in electron transfer chemistry. Chapter 1 discusses the photoinduced electron transfer in flexible biaryl donor-acceptor molecules. Chapter 2 tackles light-induced electron transfer in inorganic systems in homogeneous and heterogeneous phases. The book also covers internal geometry relaxation effects on electron transfer rates of amino-centered systems. The sequential elec

Planning for Bike Share Connectivity to Rail Transit

Science.gov (United States)

Griffin, Greg Phillip; Sener, Ipek Nese

2016-01-01

Bike sharing can play a role in providing access to transit stations and then to final destinations, but early implementation of these systems in North America has been opportunistic rather than strategic. This study evaluates local intermodal plan goals using trip data and associated infrastructure such as transit stops and bike share station locations in Austin, Texas, and Chicago, Illinois. Bike sharing use data from both cities suggest a weak relationship with existing rail stations that could be strengthened through collaborative, intermodal planning. The study suggests a planning framework and example language that could be tailored to help address the linkage between bike sharing and transit. Rather than an exhaustive study of the practice, this study provides evidence from these two cities that identify opportunities to improve intermodal planning. Cities that are planning or expanding a bike sharing system should consider carefully how to leverage this mode with existing modes of transport. Regardless of a city’s status in implementing a bike sharing system, planners can leverage information on existing transport systems for planning at regional and local levels. PMID:27872554

Multipoint sensor based on fiber Bragg gratings

International Nuclear Information System (INIS)

Mendez-Zepeda, O; Munoz-Aguirre, S; Beltran-Perez, G; Castillo-Mixcoatl, J

2011-01-01

In some control and industrial measurement systems of physical variables (pressure, temperature, flow, etc) it is necessary one system and one sensor to control each process. On the other hand, there are systems such as PLC (Programmable Logic Control), which can process several signals simultaneously. However it is still necessary to use one sensor for each variable. Therefore, in the present work the use of a multipoint sensor to solve such problem has been proposed. The sensor consists of an optical fiber laser with two Fabry-Perot cavities constructed using fiber Bragg gratings (FBG). In the same system is possible to measure changes in two variables by detecting the intermodal separation frequency of each cavity and evaluate their amplitudes. The intermodal separation frequency depends on each cavity length. The sensor signals are monitored through an oscilloscope or a PCI card and after that acquired by PC, where they are analyzed and displayed. Results of the evaluation of the intermodal frequency separation peak amplitude behavior with FBG stretching are presented.

Charge transfer in astrophysical nebulae

International Nuclear Information System (INIS)

Shields, G.A.

1990-01-01

Charge transfer has become a standard ingredient in models of ionized nebulae, supernovae remnants and active galactic nuclei. Charge transfer rate coefficients and the physics of ionized nebulae are considered. Charge transfer is applied to the ionization structure and line emission of ionized nebulae. Photoionized nebulae observations are used to test theoretical predictions of charge transfer rates. (author)

Transfer Learning beyond Text Classification

Science.gov (United States)

Yang, Qiang

Transfer learning is a new machine learning and data mining framework that allows the training and test data to come from different distributions or feature spaces. We can find many novel applications of machine learning and data mining where transfer learning is necessary. While much has been done in transfer learning in text classification and reinforcement learning, there has been a lack of documented success stories of novel applications of transfer learning in other areas. In this invited article, I will argue that transfer learning is in fact quite ubiquitous in many real world applications. In this article, I will illustrate this point through an overview of a broad spectrum of applications of transfer learning that range from collaborative filtering to sensor based location estimation and logical action model learning for AI planning. I will also discuss some potential future directions of transfer learning.

Local Transfer Coefficient, Smooth Channel

Directory of Open Access Journals (Sweden)

R. T. Kukreja

1998-01-01

Full Text Available Naphthalene sublimation technique and the heat/mass transfer analogy are used to determine the detailed local heat/mass transfer distributions on the leading and trailing walls of a twopass square channel with smooth walls that rotates about a perpendicular axis. Since the variation of density is small in the flow through the channel, buoyancy effect is negligible. Results show that, in both the stationary and rotating channel cases, very large spanwise variations of the mass transfer exist in he turn and in the region immediately downstream of the turn in the second straight pass. In the first straight pass, the rotation-induced Coriolis forces reduce the mass transfer on the leading wall and increase the mass transfer on the trailing wall. In the turn, rotation significantly increases the mass transfer on the leading wall, especially in the upstream half of the turn. Rotation also increases the mass transfer on the trailing wall, more in the downstream half of the turn than in the upstream half of the turn. Immediately downstream of the turn, rotation causes the mass transfer to be much higher on the trailing wall near the downstream corner of the tip of the inner wall than on the opposite leading wall. The mass transfer in the second pass is higher on the leading wall than on the trailing wall. A slower flow causes higher mass transfer enhancement in the turn on both the leading and trailing walls.

Transfer matrix method for four-flux radiative transfer.

Science.gov (United States)

Slovick, Brian; Flom, Zachary; Zipp, Lucas; Krishnamurthy, Srini

2017-07-20

We develop a transfer matrix method for four-flux radiative transfer, which is ideally suited for studying transport through multiple scattering layers. The model predicts the specular and diffuse reflection and transmission of multilayer composite films, including interface reflections, for diffuse or collimated incidence. For spherical particles in the diffusion approximation, we derive closed-form expressions for the matrix coefficients and show remarkable agreement with numerical Monte Carlo simulations for a range of absorption values and film thicknesses, and for an example multilayer slab.

Heat transfer with geometric shape of micro-fin tubes (I) - Condensing heat transfer

Energy Technology Data Exchange (ETDEWEB)

Kwak, K M; Chang, J S; Bai, C H; Chung, M [Yeungnam University, Kyungsan (Korea)

1999-11-01

To examine the enhancement mechanism of condensing heat transfer through microfin tube, the condensation experiments with refrigerant HCFC 22 are performed using 4 and 6 kinds of microfin tubes with outer diameter of 9.52 mm and 7.0 mm, respectively. Used microfin tubes have different shape and number of fins with each other. The main heat transfer enhancement mechanism is known to be the enlargement of heat transfer area and turbulence promotion. Together with these main factors, we can find other enhancement factors by the experimental data, which are the overflow of the refrigerant over the microfin and microfin arrangement. The overflow of the refrigerant over the microfin can be analyzed by the geometric shape of the microfin. microfin tubes having a shape which can give much overflow over the microfin show large condensing heat transfer coefficients. The effect of microfin arrangement is related to the heat transfer resistance of liquid film of refrigerant. The condensing heat transfer coefficients are high for the microfin tube with even distribution of liquid film. 17 refs., 14 figs., 3 tabs.

Characterization of Mullite-Zirconia Composite Processed by Non-Transferred and Transferred Arc Plasma

International Nuclear Information System (INIS)

Yugeswaran, S.; Selvarajan, V.; Lusvarghi, L.; Tok, A. I. Y.; Krishna, D. Siva Rama

2009-01-01

The arc plasma melting technique is a simple method to synthesize high temperature reaction composites. In this study, mullite-zirconia composite was synthesized by transferred and non-transferred arc plasma melting, and the results were compared. A mixture of alumina and zircon powders with a mole ratio of 3: 2 were ball milled for four hours and melted for two minutes in the transferred and non-transferred mode of plasma arcs. Argon and air were used as plasma forming gases. The phase and microstructural formation of melted samples were investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM). The microstructure of the composites was found to be affected by the mode of melting. In transferred arc melting, zirconia flowers with uniform lines along with mullite whiskers were obtained. In the case of non-transferred arc plasma melting, mullite whiskers along with star shape zirconia were formed. Differential thermal analysis (DTA) of the synthesized mullite-zirconia composites provided a deeper understanding of the mechanisms of mullite formation during the two different processes. (plasma technology)

Large momentum transfer phenomena

International Nuclear Information System (INIS)

Imachi, Masahiro; Otsuki, Shoichiro; Matsuoka, Takeo; Sawada, Shoji.

1978-01-01

The large momentum transfer phenomena in hadron reaction drastically differ from small momentum transfer phenomena, and are described in this paper. Brief review on the features of the large transverse momentum transfer reactions is described in relation with two-body reactions, single particle productions, particle ratios, two jet structure, two particle correlations, jet production cross section, and the component of momentum perpendicular to the plane defined by the incident protons and the triggered pions and transverse momentum relative to jet axis. In case of two-body process, the exponent N of the power law of the differential cross section is a value between 10 to 11.5 in the large momentum transfer region. The breaks of the exponential behaviors into the power ones are observed at the large momentum transfer region. The break would enable to estimate the order of a critical length. The large momentum transfer phenomena strongly suggest an important role of constituents of hadrons in the hard region. Hard rearrangement of constituents from different initial hadrons induces large momentum transfer reactions. Several rules to count constituents in the hard region have been proposed so far to explain the power behavior. Scale invariant quark interaction and hard reactions are explained, and a summary of the possible types of hard subprocess is presented. (Kato, T.)

Measuring of heat transfer coefficient

DEFF Research Database (Denmark)

Henningsen, Poul; Lindegren, Maria

Subtask 3.4 Measuring of heat transfer coefficient Subtask 3.4.1 Design and setting up of tests to measure heat transfer coefficient Objective: Complementary testing methods together with the relevant experimental equipment are to be designed by the two partners involved in order to measure...... the heat transfer coefficient for a wide range of interface conditions in hot and warm forging processes. Subtask 3.4.2 Measurement of heat transfer coefficient The objective of subtask 3.4.2 is to determine heat transfer values for different interface conditions reflecting those typically operating in hot...

Sustainable technology transfer

NARCIS (Netherlands)

Punter, H.T.; Krikhaar, R.L.; Bril, R.J.

2006-01-01

In this position paper we address the issue of transferring a technology from research into an industrial organization by presenting a refined process for technology transfer. Based on over two decades of industrial experience, we identified the need for a dedicated technology engineering phase for

On the use of analytical approximate expressions for the transfer rate in excitation transfer kinetics

International Nuclear Information System (INIS)

Kusba, J.; Sipp, B.

1985-01-01

We present a discussion about the range of validity of the usual approximate transfer rate expressions used in the description of the kinetics of diffusion-modulated excitation transfer, for a reactive interaction of exponential functional form. We simulate the features of energy transfer by a numerical inversion of the exact Laplace transform of the transfer rate. It is shown that for high diffusion coefficients of the order of 10 -5 cm 2 s -1 , the kinetics may be well reproduced, even at short times, by the asymptotic form of the transfer rate. For slow molecular displacements, the short time static regime is brought to direct observation, but the transfer rate approaches is asymptotic value at a much later time

Knowledge transfer from facilities management to building projects: A typology of transfer mechanisms

DEFF Research Database (Denmark)

Jensen, Per Anker

2012-01-01

. The typology is divided in two parts, both based on mechanisms of knowledge push and knowledge pull. The first part has the main focus on the effectiveness of the building requirements and design by knowledge transfer from FM to building project from the front end. Briefing is a central element in this part....... The second part has the main focus on efficiency of building performance and operation by knowledge transfer from FM from the back end. Commissioning is a central element in this part. The typology consists of four mechanisms of front end knowledge transfer and four mechanisms of back end knowledge transfer....

Dimensions of Motivation to Transfer: A Longitudinal Analysis of Their Influence on Retention, Transfer, and Attitude Change

Science.gov (United States)

Gegenfurtner, Andreas

2013-01-01

This longitudinal study examined the multidimensionality of motivation to transfer training. Based on self-determination theory, expectancy theory, and the theory of planned behaviour, motivation to transfer was conceptualized in three dimensions: autonomous motivation to transfer, controlled motivation to transfer, and intention to transfer.…

Providing global WLCG transfer monitoring

International Nuclear Information System (INIS)

Andreeva, J; Dieguez Arias, D; Campana, S; Keeble, O; Magini, N; Molnar, Z; Ro, G; Saiz, P; Salichos, M; Tuckett, D; Flix, J; Oleynik, D; Petrosyan, A; Uzhinsky, A; Wildish, T

2012-01-01

The WLCG[1] Transfers Dashboard is a monitoring system which aims to provide a global view of WLCG data transfers and to reduce redundancy in monitoring tasks performed by the LHC experiments. The system is designed to work transparently across LHC experiments and across the various technologies used for data transfer. Currently each LHC experiment monitors data transfers via experiment-specific systems but the overall cross-experiment picture is missing. Even for data transfers handled by FTS, which is used by 3 LHC experiments, monitoring tasks such as aggregation of FTS transfer statistics or estimation of transfer latencies are performed by every experiment separately. These tasks could be performed once, centrally, and then served to all experiments via a well-defined set of APIs. In the design and development of the new system, experience accumulated by the LHC experiments in the data management monitoring area is taken into account and a considerable part of the code of the ATLAS DDM Dashboard is being re-used. The paper describes the architecture of the Global Transfer monitoring system, the implementation of its components and the first prototype.

Nonparametric Transfer Function Models

Science.gov (United States)

Liu, Jun M.; Chen, Rong; Yao, Qiwei

2009-01-01

In this paper a class of nonparametric transfer function models is proposed to model nonlinear relationships between ‘input’ and ‘output’ time series. The transfer function is smooth with unknown functional forms, and the noise is assumed to be a stationary autoregressive-moving average (ARMA) process. The nonparametric transfer function is estimated jointly with the ARMA parameters. By modeling the correlation in the noise, the transfer function can be estimated more efficiently. The parsimonious ARMA structure improves the estimation efficiency in finite samples. The asymptotic properties of the estimators are investigated. The finite-sample properties are illustrated through simulations and one empirical example. PMID:20628584

Containment condensing heat transfer

International Nuclear Information System (INIS)

Gido, R.G.; Koestel, A.

1983-01-01

This report presents a mechanistic heat-transfer model that is valid for large scale containment heat sinks. The model development is based on the determination that the condensation is controlled by mass diffusion through the vapor-air boundary layer, and the application of the classic Reynolds' analogy to formulate expressions for the transfer of heat and mass based on hydrodynamic measurements of the momentum transfer. As a result, the analysis depends on the quantification of the shear stress (momentum transfer) at the interface between the condensate film and the vapor-air boundary layer. In addition, the currently used Tagami and Uchida test observations and their range of applicability are explained

Technology transfer of Cornell university

International Nuclear Information System (INIS)

Yoo, Wan Sik

2010-01-01

This book introduces technology transfer of Cornell university which deals with introduction of Cornell university, composition of organization and practice of technology transfer : a research contract, research perform, invention report, evaluation and succession of invention, a patent application and management, marketing, negotiation and writing contract, management of contract, compensation, result of technology transfer, cases of success on technical commercialization and daily life of technology transfer center.

Theories Supporting Transfer of Training.

Science.gov (United States)

Yamnill, Siriporn; McLean, Gary N.

2001-01-01

Reviews theories about factors affecting the transfer of training, including theories on motivation (expectancy, equity, goal setting), training transfer design (identical elements, principle, near and far), and transfer climate (organizational). (Contains 36 references.) (SK)

Technology transfer by multinational firms: the resource cost of transferring technological know-how

Energy Technology Data Exchange (ETDEWEB)

Teece, D J

1977-06-01

The essence of modern economic growth is the increase in the stock of useful knowledge and the extension of its application. Since the origins of technical and social innovations have never been confined to the borders of any one nation, the economic growth of all countries depends to some degree on the successful application of a transnational stock of knowledge. Nevertheless, economists have been remarkably slow in addressing themselves to the economics of international technology transfer. This paper addresses itself to this need. The starting-point is Arrow's suggestion (Am. Econ. Review, 52: 29-35 (May 1969)) that the cost of communication, or information transfer, is a fundamental factor influencing the world-wide diffusion of technology. The purpose of the paper is to examine the level and determinants of the costs involved in transferring technology. The value of the resources that have to be utilized to accomplish the successful transfer of a given manufacturing technology is used as a measure of the cost of transfer. The resource cost concept is therefore designed to reflect the ease or difficulty of transferring technological know-how from manufacturing plants in one country to manufacturing plants in another. 32 references.

Social Support at the Workplace, Motivation to Transfer and Training Transfer: A Multilevel Indirect Effects Model

Science.gov (United States)

Massenberg, Ann-Christine; Spurk, Daniel; Kauffeld, Simone

2015-01-01

Supervisor support, peer support and transfer motivation have been identified as important predictors of training transfer. Transfer motivation is thought to mediate the support-training transfer relationship. Especially after team training interventions that include all team members (i.e. whole-team training), individual perception of these…

Influence on Heat Transfer Coefficient of Heat Exchanger by Velocity and Heat Transfer Temperature Difference

Directory of Open Access Journals (Sweden)

WANG Fang

2017-04-01

Full Text Available Aimed to insufficient heat transfer of heat exchanger, research the influence on the heat transfer coefficient impacted by velocity and heat transfer temperature difference of tube heat exchanger. According to the different heat transfer temperature difference and gas velocity，the experimental data were divided into group. Using the control variable method，the above two factors were analyzed separately. K一△T and k一:fitting curve were clone to obtain empirical function. The entire heat exchanger is as the study object，using numerical simulation methods，porous media，k一￡model，second order upwind mode，and pressure一velocity coupling with SIMPLE algorithm，the entire heat exchanger temperature field and the heat transfer coefficient distribution were given. Finally the trend of the heat transfer coefficient effected by the above two factors was gotten.

Electron transfer in proteins

DEFF Research Database (Denmark)

Farver, O; Pecht, I

1991-01-01

Electron migration between and within proteins is one of the most prevalent forms of biological energy conversion processes. Electron transfer reactions take place between active centers such as transition metal ions or organic cofactors over considerable distances at fast rates and with remarkable...... specificity. The electron transfer is attained through weak electronic interaction between the active sites, so that considerable research efforts are centered on resolving the factors that control the rates of long-distance electron transfer reactions in proteins. These factors include (in addition......-containing proteins. These proteins serve almost exclusively in electron transfer reactions, and as it turns out, their metal coordination sites are endowed with properties uniquely optimized for their function....

The development of nuclear technology transfer

International Nuclear Information System (INIS)

Nack-chung Sung

1987-01-01

Korea, as a recipient of nuclear technology transfer, has good experience of progressively building up its indigeneous capability of nuclear technology through three stages of technology transfer, namely: technology transfer under the turnkey approach, component approach, and integrated technology transfer with a local prime contractor. Here, each stage of experience of technology transfer, with Korea as a recipient, is presented. (author)

Enhancement pattern of small hepatocellular carcinoma (HCC) at contrast-enhanced US (CEUS), MDCT, and MRI: Intermodality agreement and comparison of diagnostic sensitivity between 2005 and 2010 American Association for the Study of Liver Diseases (AASLD) guidelines

International Nuclear Information System (INIS)

Furlan, Alessandro; Marin, Daniele; Cabassa, Paolo; Taibbi, Adele; Brunelli, Elena; Agnello, Francesco; Lagalla, Roberto; Brancatelli, Giuseppe

2012-01-01

Objective: To evaluate agreement between contrast-enhanced ultrasound (CEUS), multi-detector row computed tomography (MDCT) and magnetic resonance imaging (MRI) for the assessment of typical and atypical enhancement patterns of small hepatocellular carcinoma (HCC); and to compare diagnostic sensitivity of 2005 and 2010 American Association for the Study of Liver Diseases (AASLD) guidelines. Materials and methods: Between January 2008 and December 2009, we included cirrhotic patients with newly diagnosed 10–20 mm HCC imaged at two contrast-enhanced imaging techniques among CEUS, MDCT, and MRI. Dynamic studies were reviewed by two radiologists to assess enhancement pattern. Percentage of cases with concordant findings and Cohen coefficient (k) were calculated. McNemar's test was used to compare sensitivity between 2005 and 2010 AASLD guidelines. Results: There were 91 patients (69 M; 22 F; mean age, 68 years) with 96 HCCs, studied with a combination of CEUS and MDCT (n = 59), CEUS and MRI (n = 26), or MDCT and MRI (n = 11). Intermodality agreement for assessment of tumor enhancement pattern was 67% (k = 0.294, P = 0.001). Typical enhancement pattern was detected coincidentally at two imaging modalities in 50 (52%) HCCs. Sensitivity for the diagnosis of HCC increased significantly using the 2010 AASLD (81/96 (84%) vs. 50/96 (52%), P < 0.001). Conclusions: Agreement between two imaging modalities for the detection of typical tumor enhancement pattern was reached in 52% of cases. The 2010 AASLD guidelines significantly increased the sensitivity for the diagnosis of HCC

Heat transfer 1990. Proceedings of the ninth international heat transfer conference

International Nuclear Information System (INIS)

Hetsroni, G.

1990-01-01

This book contains the proceedings of the Ninth International Heat Transfer Conference. Included in Volume 3 are the following chapters: Refrigerant vapor condensation on a horizontal tube bundle. Local heat transfer in a reflux condensation inside a closed two-phase thermosyphon and surface temperature by means of a pulsed photothermal effects

ASPEK PERPAJAKAN DALAM PRAKTEK TRANSFER PRICING

Directory of Open Access Journals (Sweden)

Yenni Mangoting

2000-01-01

Full Text Available Transfer pricing is defined as a special price for sale that is used in exchange of interdivisional to record the revenue of the selling division and expense of the buying division. The main goal of transfer pricing is to evaluate and measure the performance of a company. But transfer pricing is often used by multinational companies to minimize tax paid through the re-engineering of price transferred among divisions. The key to a successful practice of transfer pricing from tax standpoint is the existence of related parties transactions. Related parties is relationship between one company with other company and this relationship happens because of such relationship between each company does not exist naturally.To regulate the tranfer pricing practice, the regulations govern the authority to realocate transfer price among divisions that have related parties transactions. Abstract in Bahasa Indonesia : Transfer pricing didefenisikan sebagai suatu harga jual khusus yang dipakai dalam pertukaran antardivisional untuk mencatat pendapatan divisi penjual (selling division dan biaya divisi pembeli (buying division. Tujuan utama dari transfer pricing adalah mengevaluasi dan mengukur kinerja perusahaan. Tetapi sering juga transfer pricing digunakan oleh perusahaan-perusahaan multinasional untuk meminimalkan jumlah pajak yang dibayar melalui rekayasa harga yang ditransfer antardivisi. Kunci utama keberhasilan transfer pricing dari sisi pajak adalah adanya transaksi karena adanya hubungan istimewa. Hubungan istimewa merupakan hubungan kepemilikan antara satu perusahaan dengan perusahaan lain dan hubungan ini terjadi karena adanya keterkaitan satu pihak dengan pihak lain yang tidak terdapat pada hubungan biasa. Untuk mengatur transfer pricing ini, undang-undang memberikan kewenangan kepada pihak fiskus untuk menentukan kembali jumlah harga transfer antar pihak-pihak yang mempunyai hubungan istimewa. Kata kunci: transfer pricing, hubungan istimewa, perusahaan

Intermodal Terminal Facilities, Geographic WGS84, BTS (2006) [intermodal_terminal_facility_BTS_2003

Data.gov (United States)

Louisiana Geographic Information Center — This is a public dataset for the Department of Transportation, Research and Innovative Technology Administration's Bureau of Transportation Statistics. The public...

Energy transfer properties and mechanisms

International Nuclear Information System (INIS)

1991-01-01

This report discusses the energy transfer mechanisms in azulene, benzene, toluene, and isotopomers. Also discussed is the coupled energy reservoirs model, quantum effects in energy transfer, NO 2 energy transfer, densities of states, the reactant states model, and O 3 excited electronic states

Facilitating Transfer of Skills and Strategies in Occupational Therapy Practice: Practical Application of Transfer Principles.

Science.gov (United States)

Babulal, Ganesh M; Foster, Erin R; Wolf, Timothy J

2016-01-01

In Occupational Therapy (OT) practice, practitioners assume that the skills and strategies taught to clients during rehabilitation will transfer to performance and participation in everyday life. Despite transfer serving as a practice foundation, outcome studies conclude that this assumption of transfer is not occurring and it often results in decreased efficacy of rehabilitation. This paper investigated key aspects of transfer and found concepts in the psychology literature that can support transfer of skills and strategies in OT. Six key principles proposed from educational psychology can serve as a guide for practitioners to better train for transfer. In this paper, we discuss the six principles and apply concepts from psychology. Each principle is supported with examples of how they may be incorporated OT practice. If occupational therapists understand these principles and implement them in treatment, the efficacy of treatment may improve for many populations.

Technology transfer from nuclear research

International Nuclear Information System (INIS)

1989-01-01

A number of processes, components and instruments developed at the Bhabha Atomic Research Centre, (BARC), Bombay, find application in industry and are available for transfer to private or public sector undertakings for commercial exploitation. The Technology Transfer Group (TTG) constituted in January 1980 identifies such processes and prototypes which can be made available for transfer. This catalogue contains brief descriptions of such technologies and they are arranged under three groups, namely, Group A containing descriptions of technologies already transferred, Group B containing descriptions of technologies ready for transfer and Group C containing descriptions of technology transfer proposals being processed. The position in the above-mentioned groups is as on 1 March 1989. The BARC has also set up a Technology Corner where laboratory models and prototypes of instruments, equipment and components are displayed. These are described in the second part of the catalogue. (M.G.B.)

WLCG transfers dashboard: a unified monitoring tool for heterogeneous data transfers

International Nuclear Information System (INIS)

Andreeva, J; Beche, A; Saiz, P; Tuckett, D; Belov, S; Kadochnikov, I

2014-01-01

The Worldwide LHC Computing Grid provides resources for the four main virtual organizations. Along with data processing, data distribution is the key computing activity on the WLCG infrastructure. The scale of this activity is very large, the ATLAS virtual organization (VO) alone generates and distributes more than 40 PB of data in 100 million files per year. Another challenge is the heterogeneity of data transfer technologies. Currently there are two main alternatives for data transfers on the WLCG: File Transfer Service and XRootD protocol. Each LHC VO has its own monitoring system which is limited to the scope of that particular VO. There is a need for a global system which would provide a complete cross-VO and cross-technology picture of all WLCG data transfers. We present a unified monitoring tool – WLCG Transfers Dashboard – where all the VOs and technologies coexist and are monitored together. The scale of the activity and the heterogeneity of the system raise a number of technical challenges. Each technology comes with its own monitoring specificities and some of the VOs use several of these technologies. This paper describes the implementation of the system with particular focus on the design principles applied to ensure the necessary scalability and performance, and to easily integrate any new technology providing additional functionality which might be specific to that technology.

WLCG Transfers Dashboard: a Unified Monitoring Tool for Heterogeneous Data Transfers

Science.gov (United States)

Andreeva, J.; Beche, A.; Belov, S.; Kadochnikov, I.; Saiz, P.; Tuckett, D.

2014-06-01

The Worldwide LHC Computing Grid provides resources for the four main virtual organizations. Along with data processing, data distribution is the key computing activity on the WLCG infrastructure. The scale of this activity is very large, the ATLAS virtual organization (VO) alone generates and distributes more than 40 PB of data in 100 million files per year. Another challenge is the heterogeneity of data transfer technologies. Currently there are two main alternatives for data transfers on the WLCG: File Transfer Service and XRootD protocol. Each LHC VO has its own monitoring system which is limited to the scope of that particular VO. There is a need for a global system which would provide a complete cross-VO and cross-technology picture of all WLCG data transfers. We present a unified monitoring tool - WLCG Transfers Dashboard - where all the VOs and technologies coexist and are monitored together. The scale of the activity and the heterogeneity of the system raise a number of technical challenges. Each technology comes with its own monitoring specificities and some of the VOs use several of these technologies. This paper describes the implementation of the system with particular focus on the design principles applied to ensure the necessary scalability and performance, and to easily integrate any new technology providing additional functionality which might be specific to that technology.

The charge transfer structure and effective energy transfer in multiplayer assembly film

International Nuclear Information System (INIS)

Li Mingqiang; Jian Xigao

2005-01-01

Charge transfer multiplayer films have been prepared by layer-by-layer self-assembly technique. The films incorporate the rare-earth-containing polyoxometalate K 11 [Eu{PW 11 O 39 } 2 ].nH 2 O and the rich electron polyelectrolyte poly(3-viny-1-methyl-pyridine) quaternary ammonium and display a linear increase in the absorption and film thickness with the number of deposition cycles. Ultraviolet and visible absorption spectra, atomic force micrographs, small-angle X-ray reflectivity measurements, and photoluminescence spectra were used to determine the structure of films. Linear and regular multilayer growth was observed. We can observe the formation of charge transfer complex compound in multiplayer by layer-by-layer assembly method. Most importantly, the luminescence spectra show the charge transfer band in assembly films, which suggest that energy could be effectively transferred to rare earth ions in assembly multiplayer films

Quadrupolar transfer pathways

Science.gov (United States)

Antonijevic, Sasa; Bodenhausen, Geoffrey

2006-06-01

A set of graphical conventions called quadrupolar transfer pathways is proposed to describe a wide range of experiments designed for the study of quadrupolar nuclei with spin quantum numbers I = 1, 3/2, 2, 5/2, etc. These pathways, which inter alea allow one to appreciate the distinction between quadrupolar and Zeeman echoes, represent a generalization of the well-known coherence transfer pathways. Quadrupolar transfer pathways not merely distinguish coherences with different orders -2 I ⩽ p ⩽ +2 I, but allow one to follow the fate of coherences associated with single transitions that have the same coherence orderp=mIr-mIs but can be distinguished by a satellite orderq=(mIr)2-(mIs)2.

Feed/meat transfer factor determination

International Nuclear Information System (INIS)

Hoepfner, U.

1981-01-01

The transfer of cesium from the feed to bovine meat is taken as an example to discuss natural environmental conditions and their effects on the determination of the transfer factor. Criteria for estimating the validity of experimentally determined transfer factors are given and used for a critical evaluation of significant literature data. The evaluation presented in this report is not a merely statistical evaluation of transfer data, indicating one single value as the correct one (sometimes within a certain margin), but rather scans the data available for incertainties and drawbacks of the experimental methods applied, finally stating a range of variation within which transfer factors can be considered to be correct. (orig./DG) [de

Ex-vessel nuclear fuel transfer system

International Nuclear Information System (INIS)

Wade, E.E.

1978-01-01

A system for transferring fuel assemblies between a fuel transfer area and a fuel storage area while the fuel assemblies remain completely submerged in a continuous body of coolant is described. A fuel transfer area filled with reactor coolant communicating with the reactor vessel below the reactor coolant level provides a transfer area for fuel assemblies in transit to and from the reactor vessel. A positioning mechanism comprising at least one rotatable plug disposed on a fuel transfer tank located outside the reactor vessel cooperates with either the fuel transfer area or the fuel storage area to position a fuel assembly in transit. When in position, a transporting mechanism cooperating with the positioning mechanism lifts or lowers a chosen fuel assembly. The transporting mechanism together with the positioning mechanism are capable of transferring a fuel assembly between the fuel transfer area and the fuel storage area

Fast multilevel radiative transfer

International Nuclear Information System (INIS)

Paletou, Frederic; Leger, Ludovick

2007-01-01

The vast majority of recent advances in the field of numerical radiative transfer relies on approximate operator methods better known in astrophysics as Accelerated Lambda-Iteration (ALI). A superior class of iterative schemes, in term of rates of convergence, such as Gauss-Seidel and successive overrelaxation methods were therefore quite naturally introduced in the field of radiative transfer by Trujillo Bueno and Fabiani Bendicho [A novel iterative scheme for the very fast and accurate solution of non-LTE radiative transfer problems. Astrophys J 1995;455:646]; it was thoroughly described for the non-LTE two-level atom case. We describe hereafter in details how such methods can be generalized when dealing with non-LTE unpolarised radiation transfer with multilevel atomic models, in monodimensional geometry

Liquefied Natural Gas Transfer

Science.gov (United States)

1980-01-01

Chicago Bridge & Iron Company's tanks and associated piping are parts of system for transferring liquefied natural gas from ship to shore and storing it. LNG is a "cryogenic" fluid meaning that it must be contained and transferred at very low temperatures, about 260 degrees below Fahrenheit. Before the LNG can be pumped from the ship to the storage tanks, the two foot diameter transfer pipes must be cooled in order to avoid difficulties associated with sharp differences of temperature between the supercold fluid and relatively warm pipes. Cooldown is accomplished by sending small steady flow of the cryogenic substance through the pipeline; the rate of flow must be precisely controlled or the transfer line will be subjected to undesirable thermal stress.

Dissemination of CERN's Technology Transfer: Added Value from Regional Transfer Agents

Science.gov (United States)

Hofer, Franz

2005-01-01

Technologies developed at CERN, the European Organization for Nuclear Research, are disseminated via a network of external technology transfer officers. Each of CERN's 20 member states has appointed at least one technology transfer officer to help establish links with CERN. This network has been in place since 2001 and early experiences indicate…

Transfer Innovations Fund Updating Project. BC Council on Admissions and Transfer. Tourism Management Articulation

Science.gov (United States)

British Columbia Council on Admissions and Transfer, 2010

2010-01-01

In 2008, a number of changes were identified that expanded the scope of the updating required for Block Transfer for tourism management as follows: a new core curriculum for diploma programs; the need for expanded information on diploma to diploma transfer; and, a growing need for an expanded system of transfer identified in Campus 2020…

Transfer Pricing - An Innovative Approach

Directory of Open Access Journals (Sweden)

Ramona MAXIM

2017-06-01

Full Text Available This paper presents transfer pricing and elements of drafting the transfer pricing file by the big companies. The transfer pricing procedure was founded based upon Order no. 442/2016 and the Fiscal Procedure Code and it represents a method upon which the tax base is transferred from a high tax country to a country with low taxation. This legislation outlines the conditions which companies must observe in order to draft the transfer pricing documentation and the significance thresholds. The purpose to draft a transfer pricing file is to reduce the differences between prices and market value and the actual results of company taxation. Economic double taxation occurs when tax authorities apply price adjustments because the company did not respect the principle of market value. Keeping records of transfer pricing and practicing a price aligned to market requirements contribute to an understanding of business development and the creation of appropriate tax planning. Taking into account all these aspects and the fact that any taxpayer is tempted to pay the lowest possible fees, tax havens become an option. In this context we can speak of a tax haven as a loophole in the use of the market price.

Design of LEIR Transfer Lines

CERN Document Server

Carli, Ch; Hemery, J-Y

2002-01-01

The LEIR transfer lines are designed to transport the ion beam from the Linac 3 to LEIR and, after accumulation and acceleration from LEIR to the PS. A part of the transfer line is used for both, injection and extraction. Thus, it is natural to design injection and extraction optics in common. Beside optics constraints, the geometry of the existing machines (Linac 3, LEIR and PS) and transfer tunnels have to be respected. A new proposal for the LEIR transfer lines is presented.

Technology transfer in CANDU marketing

International Nuclear Information System (INIS)

Pon, G.A.

1982-06-01

The author discusses how the CANDU system lends itself to technology transfer, the scope of CANDU technology transfer, and the benefits and problems associated with technology transfer. The establishment of joint ventures between supplier and client nations offers benefits to both parties. Canada can offer varying technology transfer packages, each tailored to a client nation's needs and capabilities. Such a package could include all the hardware and software necessary to develop a self-sufficient nuclear infrastructure in the client nation

University Technology Transfer

Directory of Open Access Journals (Sweden)

Mike Cox

2004-09-01

Full Text Available This article describes the experiences and general observations of the author at Heriot-Watt University and concerns the transfer of university technology for the purposes of commercialisation. Full commercial exploitation of a university invention generally requires transferring that technology into the industrial arena, usually either by formation of a new company or licensing into an existing company. Commercialisation activities need to be carried out in unison with the prime activities of the university of research and teaching. Responsibility for commercialising university inventions generally rests with a specific group within the university, typically referred to as the technology transfer group. Each technology transfer should be considered individually and appropriate arrangements made for that particular invention. In general, this transfer process involves four stages: identification, evaluation, protection and exploitation. Considerations under these general headings are outlined from a university viewpoint. A phased approach is generally preferred where possible for the evaluation, protection and exploitation of an invention to balance risk with potential reward. Evaluation of the potential opportunity for a university invention involves essentially the same considerations as for an industrial invention. However, there are a range of commercial exploitation routes and potential deals so that only general guidelines can be given. Naturally, the final deal achieved is that which can be negotiated. The potential rewards for the university and inventor are both financial (via licensing income and equity realisation and non-financial.

Thermal plasma treatment of stormwater sediments: comparison between DC non-transferred and partially transferred arc plasma.

Science.gov (United States)

Li, O L; Guo, Y; Chang, J S; Saito, N

2015-01-01

The disposal of enormous amount of stormwater sediments becomes an emerging worldwide problem. Stormwater sediments are contaminated by heavy metals, phosphorus, trace organic and hydrocarbons, and cannot be disposed without treatment. Thermal plasma decontamination technology offers a high decomposition rate in a wide range of toxic organic compound and immobilization of heavy metal. In this study, we compared the treatment results between two different modes of thermal plasma: (1) a non-transferred direct current (DC) mode and (2) a partial DC-transferred mode. The reductions of total organic carbon (TOC) were, respectively, 25% and 80% for non-transferred and partially transferred plasma, respectively. Most of the toxic organic compounds were converted majorly to CxHy. In the gaseous emission, the accumulated CxHy, CO, NO and H2S were significantly higher in partially transferred mode than in non-transferred mode. The solid analysis demonstrated that the concentrations of Ca and Fe were enriched by 500% and 40%, respectively. New chemical compositions such as KAlSi3O8, Fe3O4, NaCl and CaSO4 were formed after treatment in partially DC-transferred mode. The power inputs were 1 and 10 kW, respectively, for non-transferred DC mode and a partially DC-transferred mode. With a lower energy input, non-transferred plasma treatment can be used for decontamination of sediments with low TOC and metal concentration. Meanwhile, partially transferred thermal plasma with higher energy input is suitable for treating sediments with high TOC percentage and volatile metal concentration. The organic compounds are converted into valuable gaseous products which can be recycled as an energy source.

Preliminary Heat Transfer Studies for the Double Shell Tanks (DST) Transfer Piping

International Nuclear Information System (INIS)

HECHT, S.L.

2000-01-01

Heat transfer studies were made to determine the thermal characteristics of double-shell tank transfer piping under both transient and steady-state conditions. A number of design and operation options were evaluated for this piping system which is in its early design phase

Evaluating Technology Transfer and Diffusion.

Science.gov (United States)

Bozeman, Barry; And Others

1988-01-01

Four articles discuss the evaluation of technology transfer and diffusion: (1) "Technology Transfer at the U.S. National Laboratories: A Framework for Evaluation"; (2) "Application of Social Psychological and Evaluation Research: Lessons from Energy Information Programs"; (3) "Technology and Knowledge Transfer in Energy R and D Laboratories: An…

12 CFR 205.10 - Preauthorized transfers.

Science.gov (United States)

2010-01-01

.... The person that obtains the authorization shall provide a copy to the consumer. (c) Consumer's right... shall inform the consumer of the right to receive notice of all varying transfers, but may give the... FUND TRANSFERS (REGULATION E) § 205.10 Preauthorized transfers. (a) Preauthorized transfers to consumer...

Transfer vibration through spine

OpenAIRE

Benyovszky, Adam

2012-01-01

Transfer Vibration through Spine Abstract In the bachelor project we deal with the topic of Transfer Vibration through Spine. The problem of TVS is trying to be solved by the critical review method. We analyse some diagnostic methods and methods of treatment based on this principle. Close attention is paid to the method of Transfer Vibration through Spine that is being currently solved by The Research Institute of Thermomechanics in The Czech Academy of Sciences in cooperation with Faculty of...

Controlled Environment Specimen Transfer

DEFF Research Database (Denmark)

Damsgaard, Christian Danvad; Zandbergen, Henny W.; Hansen, Thomas Willum

2014-01-01

an environmental transmission electron microscope to an in situ X-ray diffractometer through a dedicated transmission electron microscope specimen transfer holder, capable of sealing the specimen in a gaseous environment at elevated temperatures. Two catalyst material systems have been investigated; Cu/ZnO/Al2O3...... transferred in a reactive environment to the environmental transmission electron microscope where further analysis on the local scale were conducted. The Co/Al2O3 catalyst was reduced in the environmental microscope and successfully kept reduced outside the microscope in a reactive environment. The in situ......Specimen transfer under controlled environment conditions, such as temperature, pressure, and gas composition, is necessary to conduct successive complementary in situ characterization of materials sensitive to ambient conditions. The in situ transfer concept is introduced by linking...

Heat transfer direction dependence of heat transfer coefficients in annuli

Science.gov (United States)

Prinsloo, Francois P. A.; Dirker, Jaco; Meyer, Josua P.

2018-04-01

In this experimental study the heat transfer phenomena in concentric annuli in tube-in-tube heat exchangers at different annular Reynolds numbers, annular diameter ratios, and inlet fluid temperatures using water were considered. Turbulent flow with Reynolds numbers ranging from 15,000 to 45,000, based on the average bulk fluid temperature was tested at annular diameter ratios of 0.327, 0.386, 0.409 and 0.483 with hydraulic diameters of 17.00, 22.98, 20.20 and 26.18 mm respectively. Both heated and cooled annuli were investigated by conducting tests at a range of inlet temperatures between 10 °C to 30 °C for heating cases, and 30 °C to 50 °C for cooling cases. Of special interest was the direct measurement of local wall temperatures on the heat transfer surface, which is often difficult to obtain and evasive in data-sets. Continuous verification and re-evaluation of temperatures measurements were performed via in-situ calibration. It is shown that inlet fluid temperature and the heat transfer direction play significant roles on the magnitude of the heat transfer coefficient. A new adjusted Colburn j-factor definition is presented to describe the heating and cooling cases and is used to correlate the 894 test cases considered in this study.

The aims of transfer prices formation

Directory of Open Access Journals (Sweden)

Tomašević Stevan

2013-01-01

Full Text Available More than two-thirds of today's world trade comprises of transactions between related legal persons. Prices for the above-mentioned transactions within legal person or group of related legal persons are called transfer pricing. The aim of this paper is to present the transfer prices as well as the main objectives of transfer pricing. Also, this paper explains application of transfer pricing in the Republic of Serbia and the normative rules that cover the issue of transfer pricing, their determination and their application in the calculation. Overall, there has been a great deal of attention paid to the transfer pricing in national and international levels.

Heat transfer--Orlando (Symposium), 1980

International Nuclear Information System (INIS)

Stein, R.P.

1980-01-01

This conference proceedings contains 36 papers of which 3 appear as abstracts. 23 papers are indexed separately. Topics covered include: thermodynamics of PWR and LMFBR Steam Generators; two-phase flow in parallel channels; geothermal heat transfer; natural circulation in complex geometries; heat transfer in non-Newtonian systems; and process heat transfer

Intergenerational Knowledge Transfer

International Nuclear Information System (INIS)

Grover, R.B.

2016-01-01

Full text: Institutions of higher education and universities have been at the forefront of intergenerational knowledge transfer. Their role has gone through evolution and several ideas of the university co-exist. Factors like the squeeze on public funding of higher education across nations, exhortation by governments to value work-based learning as a part of higher education and demand for graduates ready to start working immediately on joining a workplace, are making it necessary to further evolve the classical approach towards intergenerational knowledge transfer. The paper presents a framework that has been evolved in India to meet the requirements of intergenerational knowledge transfer. It essentially integrates a workplace and a university in a single entity similar to the practice in medical education. (author

Investigating the Efficacy of Web-Based Transfer Training on Independent Wheelchair Transfers Through Randomized Controlled Trials.

Science.gov (United States)

Worobey, Lynn A; Rigot, Stephanie K; Hogaboom, Nathan S; Venus, Chris; Boninger, Michael L

2018-01-01

To determine the efficacy of a web-based transfer training module at improving transfer technique across 3 groups: web-based training, in-person training (current standard of practice), and a waitlist control group (WLCG); and secondarily, to determine subject factors that can be used to predict improvements in transfer ability after training. Randomized controlled trials. Summer and winter sporting events for disabled veterans. A convenience sample (N=71) of manual and power wheelchair users who could transfer independently. An individualized, in-person transfer training session or a web-based transfer training module. The WLCG received the web training at their follow-up visit. Transfer Assessment Instrument (TAI) part 1 score was used to assess transfers at baseline, skill acquisition immediately posttraining, and skill retention after a 1- to 2-day follow-up period. The in-person and web-based training groups improved their median (interquartile range) TAI scores from 7.98 (7.18-8.46) to 9.13 (8.57-9.58; P.05). A lower initial TAI score was found to be the only significant predictor of a larger percent change in TAI score after receiving training. Transfer training can improve technique with changes retained within a short follow-up window, even among experienced wheelchair users. Web-based transfer training demonstrated comparable improvements to in-person training. With almost half of the United States population consulting online resources before a health care professional, web-based training may be an effective method to increase knowledge translation. Copyright © 2017 American Congress of Rehabilitation Medicine. All rights reserved.

Heat transfer from a tube bank with mass transfer in a duct

International Nuclear Information System (INIS)

Nouri, A.; Lavasani, A. M.

2005-01-01

An experimental investigation on heat transfer coefficient is present from three horizontal tubes in a vertical array in a duct for 500 D <6000. A mass transfer measuring technique based on psychrometry chart is used to determine heat transfer coefficient. The diameter of the tubes is 11 mm each spaced 40 mm apart and in-line pitch ratio varies in the range 0.055< D/W<0.22. The experimental results show that the Nusselt number of each tube increases by increasing D/W. Also the increase of the second the Nusselt number is more than that of the third one

Hierarchical control of electron-transfer

DEFF Research Database (Denmark)

Westerhoff, Hans V.; Jensen, Peter Ruhdal; Egger, Louis

1997-01-01

In this chapter the role of electron transfer in determining the behaviour of the ATP synthesising enzyme in E. coli is analysed. It is concluded that the latter enzyme lacks control because of special properties of the electron transfer components. These properties range from absence of a strong...... back pressure by the protonmotive force on the rate of electron transfer to hierarchical regulation of the expression of the gens that encode the electron transfer proteins as a response to changes in the bioenergetic properties of the cell.The discussion uses Hierarchical Control Analysis...

Technology Transfer and Technology Transfer Intermediaries

Science.gov (United States)

Bauer, Stephen M.; Flagg, Jennifer L.

2010-01-01

A standard and comprehensive model is needed to evaluate and compare technology transfer systems and the stakeholders within these systems. The principle systems considered include federal laboratories, U.S. universities, the rehabilitation engineering research centers (RERCs), and large small business innovation research programs. An earlier…

International Transfer Pricing in Multinational Enterprises

DEFF Research Database (Denmark)

Rossing, Christian Plesner; Cools, Martine; Rohde, Carsten

2017-01-01

Current curricula in management accounting stress the role of transfer pricing as a tool for measuring the performance of responsibility centers and their managers. Recently, however, multinational enterprises (MNEs) have felt increasing pressure to comply with transfer pricing tax regulation...... of responsibility accounting. Specifically, the case study is a fictional MNE, allowing you to apply the OECD Guidelines in practice to cross-border transfers within an MNE, and to discuss the implications of tax-based transfer pricing for responsibility accounting. As a basis for working on the case study....... As a result, tax risk management considerations play a key role in the transfer pricing decisions of MNEs today. This case seeks to provide you with examples of the core principles of international transfer pricing, as well as to allow you to discuss international transfer pricing in the context...

Entanglement transfer between bipartite systems

International Nuclear Information System (INIS)

Bougouffa, Smail; Ficek, Zbigniew

2012-01-01

The problem of a controlled transfer of an entanglement initially encoded into two two-level atoms that are successively sent through two single-mode cavities is investigated. The atoms and the cavity modes form a four-qubit system and we demonstrate the conditions under which the initial entanglement encoded into the atoms can be completely transferred to other pairs of qubits. We find that in the case of non-zero detuning between the atomic transition frequencies and the cavity mode frequencies, no complete transfer of the initial entanglement is possible to any of the other pairs of qubits. In the case of exact resonance and equal coupling strengths of the atoms to the cavity modes, an initial maximally entangled state of the atoms can be completely transferred to the cavity modes. Complete transfer of the entanglement is restricted to the cavity modes, with transfer to the other pairs being limited to 50%. We find that complete transfer of an initial entanglement to other pairs of qubits may take place if the initial state is not the maximally entangled state and the atoms couple to the cavity modes with unequal strengths. Depending on the ratio between the coupling strengths, optimal entanglement can be created between the atoms and one of the cavity modes.

Debugging data transfers in CMS

International Nuclear Information System (INIS)

Bagliesi, G; Belforte, S; Bloom, K; Bockelman, B; Bonacorsi, D; Fisk, I; Flix, J; Hernandez, J; D'Hondt, J; Maes, J; Kadastik, M; Klem, J; Kodolova, O; Kuo, C-M; Letts, J; Magini, N; Metson, S; Piedra, J; Pukhaeva, N; Tuura, L

2010-01-01

The CMS experiment at CERN is preparing for LHC data taking in several computing preparation activities. In early 2007 a traffic load generator infrastructure for distributed data transfer tests was designed and deployed to equip the WLCG tiers which support the CMS virtual organization with a means for debugging, load-testing and commissioning data transfer routes among CMS computing centres. The LoadTest is based upon PhEDEx as a reliable, scalable data set replication system. The Debugging Data Transfers (DDT) task force was created to coordinate the debugging of the data transfer links. The task force aimed to commission most crucial transfer routes among CMS tiers by designing and enforcing a clear procedure to debug problematic links. Such procedure aimed to move a link from a debugging phase in a separate and independent environment to a production environment when a set of agreed conditions are achieved for that link. The goal was to deliver one by one working transfer routes to the CMS data operations team. The preparation, activities and experience of the DDT task force within the CMS experiment are discussed. Common technical problems and challenges encountered during the lifetime of the taskforce in debugging data transfer links in CMS are explained and summarized.

Excavating a transfer tunnel

CERN Multimedia

Laurent Guiraud

2000-01-01

The transfer tunnel being dug here will take the 450 GeV beam from the SPS and inject it into the LHC where the beam energies will be increased to 7 TeV. In order to transfer this beam from the SPS to the LHC, two transfer tunnels are used to circulate the beams in opposite directions. When excavated, the accelerator components, including magnets, beam pipes and cryogenics will be installed and connected to both the SPS and LHC ready for operation to begin in 2008.

[Countertransference in homoerotic transference].

Science.gov (United States)

Junkert-Tress, B; Reister, G

1995-01-01

Until now psychoanalytic training and literature have hardly considered the transference love of homosexual patients. We summarized the scarce literature and related it to the background of our knowledge of heterosexual transference love. The discussion leaves no doubt that, like the heterosexual, homosexual transference love must be read on all levels of psychosexual development instead of reading it on only one and definitely not on an amorphous "preoedipal" level. This is particularly true for the level of the adult homosexual patient, as the case history demonstrates.

Radiation and combined heat transfer in channels

International Nuclear Information System (INIS)

Tamonis, M.

1986-01-01

This book presents numerical methods of calculation of radiative and combined heat transfer in channel flows of radiating as well as nonradiating media. Results obtained in calculations for flow conditions of combustion products from organic fuel products are given and methods used in determining the spectral optical properties of molecular gases are analyzed. The book presents applications of heat transfer in solving problems. Topic covered are as follows: optical properties of molecular gases; transfer equations for combined heat transfer; experimental technique; convective heat transfer in heated gas flows; radiative heat transfer in gaseous media; combined heat transfer; and radiative and combined heat transfer in applied problems

Involuntary transfer of Intellectual property

Directory of Open Access Journals (Sweden)

Saeed habiba

2011-07-01

Full Text Available IPR owners have a right about voluntary transfer but sometimes Intellectual property right transfer by force and thus, there are challenge that this article regard for its. IPR shall be devolved to their legitimate heirs after their death unless, owner indicate otherwise in their wills. The heirs have the exclusive right to exercise economic and moral rights, they decide upon publication of the work and in general do every exploitation. But, they shall exercise The decisive manner that IPR of holder intended before his death. On other hand, IPR may be liable to seizure or IPR have been used in mortgage loan. Thus they can be transfer to new person.Here, we regard to Involuntary transfer.This article highlight subject of involuntary transfer and analysis on aspects

A Simple Estimation of Coupling Loss Factors for Two Flexible Subsystems Connected via Discrete Interfaces

Directory of Open Access Journals (Sweden)

Jun Zhang

2016-01-01

Full Text Available A simple formula is proposed to estimate the Statistical Energy Analysis (SEA coupling loss factors (CLFs for two flexible subsystems connected via discrete interfaces. First, the dynamic interactions between two discretely connected subsystems are described as a set of intermodal coupling stiffness terms. It is then found that if both subsystems are of high modal density and meanwhile the interface points all act independently, the intermodal dynamic couplings become dominated by only those between different subsystem mode sets. If ensemble- and frequency-averaged, the intermodal coupling stiffness terms can simply reduce to a function of the characteristic dynamic properties of each subsystem and the subsystem mass, as well as the number of interface points. The results can thus be accommodated within the theoretical frame of conventional SEA theory to yield a simple CLF formula. Meanwhile, the approach allows the weak coupling region between the two SEA subsystems to be distinguished simply and explicitly. The consistency and difference of the present technique with and from the traditional wave-based SEA solutions are discussed. Finally, numerical examples are given to illustrate the good performance of the present technique.

Debugging Data Transfers in CMS

CERN Document Server

Bagliesi, G; Bloom, K; Bockelman, B; Bonacorsi, D; Fisk, I; Flix, J; Hernandez, J; D'Hondt, J; Kadastik, M; Klem, J; Kodolova, O; Kuo, C M; Letts, J; Maes, J; Magini, N; Metson, S; Piedra, J; Pukhaeva, N; Tuura, L; Sonajalg, S; Wu, Y; Van Mulders, P; Villella, I; Wurthwein, F

2010-01-01

The CMS experiment at CERN is preparing for LHC data taking in several computing preparation activities. In early 2007 a traffic load generator infrastructure for distributed data transfer tests called the LoadTest was designed and deployed to equip the WLCG sites that support CMS with a means for debugging, load-testing and commissioning data transfer routes among CMS computing centres. The LoadTest is based upon PhEDEx as a reliable, scalable data set replication system. The Debugging Data Transfers (DDT) task force was created to coordinate the debugging of the data transfer links. The task force aimed to commission most crucial transfer routes among CMS sites by designing and enforcing a clear procedure to debug problematic links. Such procedure aimed to move a link from a debugging phase in a separate and independent environment to a production environment when a set of agreed conditions are achieved for that link. The goal was to deliver one by one working transfer routes to the CMS data operations team...

Electrophoretic transfer protein zymography.

Science.gov (United States)

Pan, Daniel; Hill, Adam P; Kashou, Anthony; Wilson, Karl A; Tan-Wilson, Anna

2011-04-15

Zymography detects and characterizes proteolytic enzymes by electrophoresis of protease-containing samples into a nonreducing sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) gel containing a copolymerized protein substrate. The usefulness of zymography for molecular weight determination and proteomic analysis is hampered by the fact that some proteases exhibit slower migration through a gel that contains substrate protein. This article introduces electrophoretic transfer protein zymography as one solution to this problem. In this technique, samples containing proteolytic enzymes are first resolved in nonreducing SDS-PAGE on a gel without protein substrate. The proteins in the resolving gel are then electrophoretically transferred to a receiving gel previously prepared with a copolymerized protein substrate. The receiving gel is then developed as a zymogram to visualize clear or lightly stained bands in a dark background. Band intensities are linearly related to the amount of protease, extending the usefulness of the technique so long as conditions for transfer and development of the zymogram are kept constant. Conditions of transfer, such as the pore sizes of resolving and receiving gels and the transfer time relative to the molecular weight of the protease, are explored. Copyright © 2011 Elsevier Inc. All rights reserved.

Technology transfer for adaptation

Science.gov (United States)

Biagini, Bonizella; Kuhl, Laura; Gallagher, Kelly Sims; Ortiz, Claudia

2014-09-01

Technology alone will not be able to solve adaptation challenges, but it is likely to play an important role. As a result of the role of technology in adaptation and the importance of international collaboration for climate change, technology transfer for adaptation is a critical but understudied issue. Through an analysis of Global Environment Facility-managed adaptation projects, we find there is significantly more technology transfer occurring in adaptation projects than might be expected given the pessimistic rhetoric surrounding technology transfer for adaptation. Most projects focused on demonstration and early deployment/niche formation for existing technologies rather than earlier stages of innovation, which is understandable considering the pilot nature of the projects. Key challenges for the transfer process, including technology selection and appropriateness under climate change, markets and access to technology, and diffusion strategies are discussed in more detail.

Technology transfer quality assurance

International Nuclear Information System (INIS)

Hood, F.C.

1991-03-01

The results of research conducted at Pacific Northwest Laboratory (PNL) for the DOE are regularly transferred from the laboratory to the private sector. The principal focus of PNL is on environmental research and waste management technology; other programs of emphasis include molecular science research. The technology transfer process is predicated on Quality to achieve its objectives effectively. Total quality management (TQM) concepts and principles readily apply to the development and translation of new scientific concepts into commercial products. The concept of technology transfer epitomizes the TQM tenet of continuous improvement: always striving for a better way to do things and always satisfying the customer. A successful technology transfer process adds value to society by providing new or enhanced processes, products, and services to government and commercial customers, with a guarantee of product pedigree and process validity. 2 refs

A heat transfer textbook

CERN Document Server

Lienhard, John H

2011-01-01

This introduction to heat transfer offers advanced undergraduate and graduate engineering students a solid foundation in the subjects of conduction, convection, radiation, and phase-change, in addition to the related topic of mass transfer. A staple of engineering courses around the world for more than three decades, it has been revised and updated regularly by the authors, a pair of recognized experts in the field. The text addresses the implications, limitations, and meanings of many aspects of heat transfer, connecting the subject to its real-world applications and developing students' ins

Wireless power transfer: control algorithm to transfer the maximum power

OpenAIRE

Rojas Urbano, Javier Arturo

2016-01-01

This job is developed as part of “Health aware enhanced range wireless power transfer systems", known as ETHER. It is a cooperation project where Universidad Politécnica de Madrid (UPM) and Universidad Politécnica de Cataluña (UPC) research groups are mainly involved. ETHER objective is to develop a wireless power transfer system for medical applications, specifically a pacemaker charger to improve patient’s lifestyle decreasing the number of required operations to replace pacemaker batter...

Capillary-Condenser-Pumped Heat-Transfer Loop

Science.gov (United States)

Silverstein, Calvin C.

1989-01-01

Heat being transferred supplies operating power. Capillary-condenser-pumped heat-transfer loop similar to heat pipe and to capillary-evaporator-pumped heat-transfer loop in that heat-transfer fluid pumped by evaporation and condensation of fluid at heat source and sink, respectively. Capillary condenser pump combined with capillary evaporator pump to form heat exchanger circulating heat-transfer fluids in both loops. Transport of heat more nearly isothermal. Thermal stress in loop reduced, and less external surface area needed in condenser section for rejection of heat to heat sink.

A dynamic approach to technology transfer

International Nuclear Information System (INIS)

Shave, D.F.; Kent, G.F.; Giambusso, A.; Jacobs, S.B.

1987-01-01

Stone and Webster Engineering Corporation has developed a systematic program for achieving efficient, effective technology transfer. This program is based on transferring both know-why and know-how. The transfer of know-why and know-how is achieved most effectively by working in partnership with the recipient of the technology; by employing five primary transfer mechanisms, according to the type of learning required; by treating the technology transfer as a designed process rather than an isolated event; and by using a project management approach to control and direct the process. This paper describes the philosophy, process, and training mechanisms that have worked for Stone and Webster, as well as the project management approach needed for the most effective transfer of technology. (author)

Improving the transition of care in patients transferred through the ochsner medical center transfer center.

Science.gov (United States)

Amedee, Ronald G; Maronge, Genevieve F; Pinsky, William W

2012-01-01

Patient transfers from other hospitals within the Ochsner Health System to the main campus are coordinated through a Transfer Center that was established in fall 2008. We analyzed the transfer process to assess distinct opportunities to enhance the overall transition of patient care. We surveyed internal medicine residents and nocturnists to determine their satisfaction with transfers in terms of safety, efficiency, and usefulness of information provided at the time of transfer. After a kaizen event at which complementary goals for the institution and members of the study team were recognized and implemented, we resurveyed the group to evaluate improvement in the transfer process. The preintervention average satisfaction score was 1.18 (SD=0.46), while the postintervention score was 3.7 (SD=1.01). A t test showed a significant difference in the average scores between the preintervention and postintervention surveys (Pkaizen event), data were collected that facilitated fewer and higher quality handoffs that were performed in less time. In addition, the process resulted in increased awareness of the value of resident participation in institutional quality improvement projects.

The Data Transfer Kit: A geometric rendezvous-based tool for multiphysics data transfer

International Nuclear Information System (INIS)

Slattery, S. R.; Wilson, P. P. H.; Pawlowski, R. P.

2013-01-01

The Data Transfer Kit (DTK) is a software library designed to provide parallel data transfer services for arbitrary physics components based on the concept of geometric rendezvous. The rendezvous algorithm provides a means to geometrically correlate two geometric domains that may be arbitrarily decomposed in a parallel simulation. By repartitioning both domains such that they have the same geometric domain on each parallel process, efficient and load balanced search operations and data transfer can be performed at a desirable algorithmic time complexity with low communication overhead relative to other types of mapping algorithms. With the increased development efforts in multiphysics simulation and other multiple mesh and geometry problems, generating parallel topology maps for transferring fields and other data between geometric domains is a common operation. The algorithms used to generate parallel topology maps based on the concept of geometric rendezvous as implemented in DTK are described with an example using a conjugate heat transfer calculation and thermal coupling with a neutronics code. In addition, we provide the results of initial scaling studies performed on the Jaguar Cray XK6 system at Oak Ridge National Laboratory for a worse-case-scenario problem in terms of algorithmic complexity that shows good scaling on 0(1 x 104) cores for topology map generation and excellent scaling on 0(1 x 105) cores for the data transfer operation with meshes of O(1 x 109) elements. (authors)

The Data Transfer Kit: A geometric rendezvous-based tool for multiphysics data transfer

Energy Technology Data Exchange (ETDEWEB)

Slattery, S. R.; Wilson, P. P. H. [Department of Engineering Physics, University of Wisconsin - Madison, 1500 Engineering Dr., Madison, WI 53706 (United States); Pawlowski, R. P. [Sandia National Laboratories, P.O. Box 5800, Albuquerque, NM 87185 (United States)

2013-07-01

The Data Transfer Kit (DTK) is a software library designed to provide parallel data transfer services for arbitrary physics components based on the concept of geometric rendezvous. The rendezvous algorithm provides a means to geometrically correlate two geometric domains that may be arbitrarily decomposed in a parallel simulation. By repartitioning both domains such that they have the same geometric domain on each parallel process, efficient and load balanced search operations and data transfer can be performed at a desirable algorithmic time complexity with low communication overhead relative to other types of mapping algorithms. With the increased development efforts in multiphysics simulation and other multiple mesh and geometry problems, generating parallel topology maps for transferring fields and other data between geometric domains is a common operation. The algorithms used to generate parallel topology maps based on the concept of geometric rendezvous as implemented in DTK are described with an example using a conjugate heat transfer calculation and thermal coupling with a neutronics code. In addition, we provide the results of initial scaling studies performed on the Jaguar Cray XK6 system at Oak Ridge National Laboratory for a worse-case-scenario problem in terms of algorithmic complexity that shows good scaling on 0(1 x 104) cores for topology map generation and excellent scaling on 0(1 x 105) cores for the data transfer operation with meshes of O(1 x 109) elements. (authors)

Targeting Low-Energy Ballistic Lunar Transfers

Science.gov (United States)

Parker, Jeffrey S.

2010-01-01

Numerous low-energy ballistic transfers exist between the Earth and Moon that require less fuel than conventional transfers, but require three or more months of transfer time. An entirely ballistic lunar transfer departs the Earth from a particular declination at some time in order to arrive at the Moon at a given time along a desirable approach. Maneuvers may be added to the trajectory in order to adjust the Earth departure to meet mission requirements. In this paper, we characterize the (Delta)V cost required to adjust a low-energy ballistic lunar transfer such that a spacecraft may depart the Earth at a desirable declination, e.g., 28.5(white bullet), on a designated date. This study identifies the optimal locations to place one or two maneuvers along a transfer to minimize the (Delta)V cost of the transfer. One practical application of this study is to characterize the launch period for a mission that aims to launch from a particular launch site, such as Cape Canaveral, Florida, and arrive at a particular orbit at the Moon on a given date using a three-month low-energy transfer.

78 FR 17066 - Indirect Stock Transfers and Coordination Rule Exceptions; Transfers of Stock or Securities in...

Science.gov (United States)

2013-03-19

... Indirect Stock Transfers and Coordination Rule Exceptions; Transfers of Stock or Securities in Outbound... issue of the Federal Register, the IRS and the Treasury Department are issuing temporary regulations... stock transfers for certain outbound asset reorganizations. The temporary regulations also modify the...

Orbital Express fluid transfer demonstration system

Science.gov (United States)

Rotenberger, Scott; SooHoo, David; Abraham, Gabriel

2008-04-01

Propellant resupply of orbiting spacecraft is no longer in the realm of high risk development. The recently concluded Orbital Express (OE) mission included a fluid transfer demonstration that operated the hardware and control logic in space, bringing the Technology Readiness Level to a solid TRL 7 (demonstration of a system prototype in an operational environment). Orbital Express (funded by the Defense Advanced Research Projects Agency, DARPA) was launched aboard an Atlas-V rocket on March 9th, 2007. The mission had the objective of demonstrating technologies needed for routine servicing of spacecraft, namely autonomous rendezvous and docking, propellant resupply, and orbital replacement unit transfer. The demonstration system used two spacecraft. A servicing vehicle (ASTRO) performed multiple dockings with the client (NextSat) spacecraft, and performed a variety of propellant transfers in addition to exchanges of a battery and computer. The fluid transfer and propulsion system onboard ASTRO, in addition to providing the six degree-of-freedom (6 DOF) thruster system for rendezvous and docking, demonstrated autonomous transfer of monopropellant hydrazine to or from the NextSat spacecraft 15 times while on orbit. The fluid transfer system aboard the NextSat vehicle was designed to simulate a variety of client systems, including both blowdown pressurization and pressure regulated propulsion systems. The fluid transfer demonstrations started with a low level of autonomy, where ground controllers were allowed to review the status of the demonstration at numerous points before authorizing the next steps to be performed. The final transfers were performed at a full autonomy level where the ground authorized the start of a transfer sequence and then monitored data as the transfer proceeded. The major steps of a fluid transfer included the following: mate of the coupling, leak check of the coupling, venting of the coupling, priming of the coupling, fluid transfer, gauging

Supervision on Transference and Counter-Transference Issues for Undergraduate Students’ Counseling Practice at Counseling Department

Directory of Open Access Journals (Sweden)

Amirah Diniaty

2014-07-01

Full Text Available Undergraduate students should take 4 credits for counseling practice subject in Counseling Department of State Islamic University of Riau. The subject is taken by seventh semester students who conduct counseling practice at senior high school for 3 months. Based on prelimenary study, majority of students acknowledged that they felt nervous to follow this programme. Thus, the problem of transference and counter transference issue for undergraduate students counseling practice must be answered by their supervisions. The result showed that a total of 93% of respondents had positive transference, while 7% of them had negative one. It means that majority of respondents felt positive transference, while internship students faced identification counter transference. It was proved that internship students did not need to have negative thinking of being rejected by the schools. The finding also showed that 97.3% of interenship students faced identification counter transference, while 2,7%  of them experienced for unidentification of transfenece. It means that there were a few of them should be supervised to have good counter transference. Supervision format that done by supervisor (university teacher and tutor (high school teacher was by conducting monthly meeting and by following up counseling result and writing report. It is recommended that a professional discussion is conducted to discuss problems faced by internship students.

Innovation through Knowledge Transfer 2012

CERN Document Server

Gabrys, Bogdan; Musial-Gabrys, Katarzyna; Roach, Jim; Innovation through Knowledge Transfer InnovationKT-2012

2013-01-01

Across the world there is growing awareness of the importance of innovation and knowledge transfer.  Innovation in the sense of generating new knowledge and making better use of existing knowledge, coupled with knowledge transfer and sharing paradigms, have never been more relevant to the universities, industry, commerce and the third sector.  This volume represents the proceedings of the Innovation through Knowledge Transfer 2012 Conference which formed an excellent opportunity to disseminate, share and discuss the impact of innovation, knowledge sharing, enterprise and entrepreneurship.  The volume contains papers presented at a Workshop on ‘The Meta Transfer of Knowledge: Challenges in the Transfer of Knowledge in Industry’, others from thematic sessions on ‘Next-Practice in University Based Open Innovation’,  ‘Social Innovation and Related Paradigms’, ‘Engagement with Industry and Commerce’ and ‘Knowledge Exchange’.  All papers were thoroughly reviewed by referees knowledgeable in...

Cash transfers and domestic violence.

Science.gov (United States)

Hidrobo, Melissa; Fernald, Lia

2013-01-01

Violence against women is a major health and human rights problem yet there is little rigorous evidence as to how to reduce it. We take advantage of the randomized roll-out of Ecuador's cash transfer program to mothers to investigate how an exogenous increase in a woman's income affects domestic violence. We find that the effect of a cash transfer depends on a woman's education and on her education relative to her partner's. Our results show that for women with greater than primary school education a cash transfer significantly decreases psychological violence from her partner. For women with primary school education or less, however, the effect of a cash transfer depends on her education relative to her partner's. Specifically, the cash transfer significantly increases emotional violence in households where the woman's education is equal to or more than her partner's. Copyright © 2012 Elsevier B.V. All rights reserved.

Fast multilevel radiative transfer

Science.gov (United States)

Paletou, Frédéric; Léger, Ludovick

2007-01-01

The vast majority of recent advances in the field of numerical radiative transfer relies on approximate operator methods better known in astrophysics as Accelerated Lambda-Iteration (ALI). A superior class of iterative schemes, in term of rates of convergence, such as Gauss-Seidel and Successive Overrelaxation methods were therefore quite naturally introduced in the field of radiative transfer by Trujillo Bueno & Fabiani Bendicho (1995); it was thoroughly described for the non-LTE two-level atom case. We describe hereafter in details how such methods can be generalized when dealing with non-LTE unpolarised radiation transfer with multilevel atomic models, in monodimensional geometry.

Investigating Knowledge Transfer Mechanisms for Oil Rigs

DEFF Research Database (Denmark)

Vianello, Giovanna; Ahmed, Saeema

2009-01-01

It is widely recognized, both in industry and academia, that clear strategies in knowledge transfer positively influence the success of a firm. A firm should support the transfer of knowledge by standardizing communication channels within and across departments, based upon personalization......, codification or a combination of these two strategies. The characteristics of the business influence the choice of communication channels used for knowledge transfer. This paper presents a case study exploring the transfer of knowledge within and across projects, specifically the transfer of service knowledge...... in the case of complex machinery. The strategies used for knowledge transfer were analysed and compared with the expected transfer mechanisms, similarities and differences were investigated and are described. A family of four identical rigs for offshore drilling was the selected case. The transfer...

Transfer maps and projection formulas

OpenAIRE

Tabuada, Goncalo

2010-01-01

Transfer maps and projection formulas are undoubtedly one of the key tools in the development and computation of (co)homology theories. In this note we develop an unified treatment of transfer maps and projection formulas in the non-commutative setting of dg categories. As an application, we obtain transfer maps and projection formulas in algebraic K-theory, cyclic homology, topological cyclic homology, and other scheme invariants.

Influence of high range of mass transfer coefficient and convection heat transfer on direct contact membrane distillation performance

KAUST Repository

Lee, Jung Gil

2017-11-03

In order to improve water production of membrane distillation (MD), the development of high performance membrane having better mass transfer and enhancement of convection heat transfer in MD module have been continuously investigated. This paper presents the relationship between the heat and mass transfer resistance across the membrane and the performance improvement. Various ranges of mass transfer coefficient (MTC) from normal (0.3×10−6 to 2.1×10−6kg/m2sPa: currently available membranes) to high (>2.1×10−6kg/m2sPa: membranes under development) were simulated using an experimentally validated model at different ranges of convection heat transfer by varying the inlet flow rates and spacer enhancement factor. The effect of mass transfer and convection heat transfer on the MD performance parameters including temperature polarization coefficient (TPC), mean permeate flux, and specific energy consumption were investigated in a direct contact MD (DCMD) configuration. Results showed that improving the MTC at the low ranges is more important than that at the high ranges where the heat transfer resistance becomes dominant and hence the convection heat transfer coefficient must be increased. Therefore, an effort on designing MD modules using feed and permeate spacers and controlling the membrane surface roughness to increase the convection heat transfer and TPC in the channel aiming to enhance the flux is required because the currently developed mass transfer has almost reached the critical point.

Transfer og effekt

DEFF Research Database (Denmark)

Sørensen, Peter

2017-01-01

Effekt, virkning eller udbytte af en lederuddannelse afhænger af en række individuelle, uddannelsesmæssige og organisatoriske faktorer. Det ved vi fra uddannelsesforskningen og særligt fra forskningen i transfer. Kun hvis uddannelsesinstitutionerne såvel som de studerende og arbejdspladserne vil...... medvirke aktivt til at skabe og fremme transfer, kan man gøre sig forhåbninger om, at få effekt af en lederuddannelse....

Knowledge Management and Transfer

Energy Technology Data Exchange (ETDEWEB)

Sennanye, D.M.; Thugwane, S.J.; Rasweswe, M.A. [South African Young Nuclear Professionals Society, South African Nuclear Energy Cooperation, National Nuclear Regulator, P O Box 7106, Centurion 0046 (South Africa)

2008-07-01

Knowledge management has become an important concept in the nuclear industry globally. This has been driven by the fact that new reactors are commissioned and some are decommissioned. Since most old experts are near retirement then there is a need to capture the nuclear knowledge and expertise and transfer it to the new generation. Knowledge transfer is one of the important building blocks of knowledge management. Processes and strategies need to be developed in order to transfer this knowledge. South African Young Nuclear Professionals Society (SAYNPS) has established a document to address strategies that can be used to close the knowledge gap between the young less experienced and experts in the field. This action will help the young generation to participate in knowledge management. The major challenges will be the willingness of the experts to share and making sure that all knowledge is captured, stored and kept up to date. The paper presents the SAYNPS point of view with regard to knowledge transfer. (authors)

Knowledge Management and Transfer

International Nuclear Information System (INIS)

Sennanye, D.M.; Thugwane, S.J.; Rasweswe, M.A.

2008-01-01

Knowledge management has become an important concept in the nuclear industry globally. This has been driven by the fact that new reactors are commissioned and some are decommissioned. Since most old experts are near retirement then there is a need to capture the nuclear knowledge and expertise and transfer it to the new generation. Knowledge transfer is one of the important building blocks of knowledge management. Processes and strategies need to be developed in order to transfer this knowledge. South African Young Nuclear Professionals Society (SAYNPS) has established a document to address strategies that can be used to close the knowledge gap between the young less experienced and experts in the field. This action will help the young generation to participate in knowledge management. The major challenges will be the willingness of the experts to share and making sure that all knowledge is captured, stored and kept up to date. The paper presents the SAYNPS point of view with regard to knowledge transfer. (authors)

Heat transfer correlations in mantle tanks

DEFF Research Database (Denmark)

Furbo, Simon; Knudsen, Søren

2005-01-01

on calculations with a CFD-model, which has earlier been validated by means of experiments. The CFD-model is used to determine the heat transfer between the solar collector fluid in the mantle and the walls surrounding the mantle in all levels of the mantle as well as the heat transfer between the wall...... transfer correlations are suitable as input for a detailed simulation model for mantle tanks. The heat transfer correlations determined in this study are somewhat different from previous reported heat transfer correlations. The reason is that this study includes more mantle tank designs and operation......Small solar domestic hot water systems are best designed as low flow systems based on vertical mantle tanks. Theoretical investigations of the heat transfer in differently designed vertical mantle tanks during different operation conditions have been carried out. The investigations are based...

Reaction of electron-transfer flavoprotein with electron-transfer flavoprotein-ubiquinone oxidoreductase

International Nuclear Information System (INIS)

Beckmann, J.D.; Frerman, F.E.

1985-01-01

The oxidative half-reaction of electron-transfer flavoprotein (ETF), electron transfer from ETF to electron-transfer flavoprotein-ubiquinone oxidoreductase (ETF-QO), is dependent on complementary surface charges on the two proteins. ETF is the positively charged member of the redox pair. The evidence is based on the pH and ionic strength dependencies of the comproportionation of oxidized ETF and ETF hydroquinone catalyzed by ETF-QO and on the effects of chemical modification of ETF on the comproportionation reaction. Acetylation of one and five epsilon-amino groups of lysyl residues results in 3- and 13-fold increases, respectively, in the K/sub m/ of ETF-QO for ETF but no change in V/sub max/. Amidination, which maintains positive charge at modified loci, has no effect on steady-state kinetic constants. These chemical modifications have no effect on the equilibrium constant for equilibration of ETF redox states. The K/sub m/ of ETF-QO for ETF is pH dependent above pH 8.5, suggesting titration of lysyl residues. The ionic strength dependence of TN/KmETF for the reaction follows the limiting Bronsted equation. The ETF-QO-catalyzed comproportionation reaction exhibits a primary deuterium isotope effect in D 2 O, perhaps indicating the participation of solvent water in the electron-transfer reaction

Lunar Cube Transfer Trajectory Options

Science.gov (United States)

Folta, David; Dichmann, Donald James; Clark, Pamela E.; Haapala, Amanda; Howell, Kathleen

2015-01-01

Numerous Earth-Moon trajectory and lunar orbit options are available for Cubesat missions. Given the limited Cubesat injection infrastructure, transfer trajectories are contingent upon the modification of an initial condition of the injected or deployed orbit. Additionally, these transfers can be restricted by the selection or designs of Cubesat subsystems such as propulsion or communication. Nonetheless, many trajectory options can b e considered which have a wide range of transfer duration, fuel requirements, and final destinations. Our investigation of potential trajectories highlights several options including deployment from low Earth orbit (LEO) geostationary transfer orbits (GTO) and higher energy direct lunar transfer and the use of longer duration Earth-Moon dynamical systems. For missions with an intended lunar orbit, much of the design process is spent optimizing a ballistic capture while other science locations such as Sun-Earth libration or heliocentric orbits may simply require a reduced Delta-V imparted at a convenient location along the trajectory.

Nuclear fuel powder transfer device

International Nuclear Information System (INIS)

Komono, Akira

1998-01-01

A pair of parallel rails are laid between a receiving portion to a molding portion of a nuclear fuel powder transfer device. The rails are disposed to the upper portion of a plurality of parallel support columns at the same height. A powder container is disposed while being tilted in the inside of the vessel main body of a transfer device, and rotational shafts equipped with wheels are secured to right and left external walls. A nuclear powder to be mixed, together with additives, is supplied to the powder container of the transfer device. The transfer device engaged with the rails on the receiving side is transferred toward the molding portion. The wheels are rotated along the rails, and the rotational shafts, the vessel main body and the powder container are rotated. The nuclear powder in the tilted powder container disposed is rotated right and left and up and down by the rotation, and the powder is mixed satisfactory when it reaches the molding portion. (I.N.)

Far-field RF energy transfer and harvesting

NARCIS (Netherlands)

Visser, H.J.; Vullers, R.; Briand, D.; Yeatman, E.; Roundy, S.

2015-01-01

This chapter deals with radio frequency (RF) energy transfer over a distance. After explaining the differences between nonradiative and radiative RF energy transfer, the chapter gives definitions for transfer and harvesting. Nonradiative RF energy transfer is mostly employed in inductive systems,

Subsidiary Autonomy and Knowledge Transfer

DEFF Research Database (Denmark)

Søberg, Peder Veng; Wæhrens, Brian Vejrum

2015-01-01

Purpose: This paper explores the effect of subsidiary autonomy on knowledge transfers during captive R&D offshoring to emerging markets. Design/methodology/approach: A framework to this end is developed and illustrated in relation to four cases of captive R&D offshoring to emerging markets....... Findings: Subsidiary autonomy has a mainly negative effect on primary knowledge transfer and a mainly positive effect on reverse knowledge transfer. Newly established R&D subsidiaries in emerging markets need primary knowledge transfer in order to build up their competence before they can add...... to the knowledge level of the MNE. Originality: A dual role of subsidiary autonomy is identified. Gradual increase in R&D subsidiary autonomy is beneficial for subsidiary innovation performance....

Convection heat transfer

CERN Document Server

Bejan, Adrian

2013-01-01

Written by an internationally recognized authority on heat transfer and thermodynamics, this second edition of Convection Heat Transfer contains new and updated problems and examples reflecting real-world research and applications, including heat exchanger design. Teaching not only structure but also technique, the book begins with the simplest problem solving method (scale analysis), and moves on to progressively more advanced and exact methods (integral method, self similarity, asymptotic behavior). A solutions manual is available for all problems and exercises.

Credit risk transfer

OpenAIRE

Bank for International Settlements

2003-01-01

Executive summary Techniques for transferring credit risk, such as financial guarantees and credit insurance, have been a long-standing feature of financial markets. In the past few years, however, the range of credit risk transfer (CRT) instruments and the circumstances in which they are used have widened considerably. A number of factors have contributed to this growth, including: greater focus by banks and other financial institutions on risk management; a more rigorous approach to risk/re...

People transfer-sinequanon for nuclear technology transfer

International Nuclear Information System (INIS)

Ahmed, M.

1977-01-01

The main obstacles facing the developing countries which wish to adopt sophisticated nuclear technology can be the following: lack of trained personnel, lack of entrepreneurs and capital, and bureaucracy. Of these the greatest problem is undoubtedly the lack of trained manpower. Urgently required skilled manpower may be obtained through training of selected persons in foreign countries on a crash program of nuclear energy. Exchange of expertise can also take place among the developing countries themselves. Another problem particularly peculiar to the poor developing countries is the lack of entrepreneurs and capital. It therefore becomes necessary to attract entrepreneurs from abroad with all the benefit of managerial know-how and capital transfer that it entails. Exchange of scientist, teachers, managerial and administrative personnel between the developed and developing countries and also among the developing countries themselves is therefore essential for an effective transfer of nuclear technology

A literature survey on numerical heat transfer

Science.gov (United States)

Shih, T. M.

1982-12-01

Technical papers in the area of numerical heat transfer published from 1977 through 1981 are reviewed. The journals surveyed include: (1) ASME Journal of Heat Transfer, (2) International Journal of Heat and Mass Transfer, (3) AIAA Journal, (4) Numerical Heat Transfer, (5) Computers and Fluids, (6) International Journal for Numerical Methods in Engineering, (7) SIAM Journal of Numerical Analysis, and (8) Journal of Computational Physics. This survey excludes experimental work in heat transfer and numerical schemes that are not applied to equations governing heat transfer phenomena. The research work is categorized into the following areas: (A) conduction, (B) boundary-layer flows, (C) momentum and heat transfer in cavities, (D) turbulent flows, (E) convection around cylinders and spheres or within annuli, (F) numerical convective instability, (G) radiation, (H) combustion, (I) plumes, jets, and wakes, (J) heat transfer in porous media, (K) boiling, condensation, and two-phase flows, (L) developing and fully developed channel flows, (M) combined heat and mass transfer, (N) applications, (O) comparison and properties of numerical schemes, and (P) body-fitted coordinates and nonuniform grids.

Heat transfer study under supercritical pressure conditions

International Nuclear Information System (INIS)

Yamashita, Tohru; Yoshida, Suguru; Mori, Hideo; Morooka, Shinichi; Komita, Hideo; Nishida, Kouji

2003-01-01

Experiments were performed on heat transfer and pressure drop of a supercritical pressure fluid flowing upward in a uniformly heated vertical tube of a small diameter, using HCFC22 as a test fluid. Following results were obtained. (1) Characteristics of the heat transfer are similar to those for the tubes of large diameter. (2) The effect of tube diameter on the heat transfer was seen for a 'normal heat transfer, but not for a 'deteriorated' heat transfer. (3) The limit heat flux for the occurrence of deterioration in heat transfer becomes larger with smaller diameter tube. (4) The Watts and Chou correlation has the best prediction performance for the present data in the 'normal' heat transfer region. (5) Frictional pressure drop becomes smaller than that for an isothermal flow in the region near the pseudocritical point, and this reduction was more remarkable for the deteriorated' heat transfer. (author)

Transfer pricing: van basismethoden tot systeem

NARCIS (Netherlands)

Steens, H.B.A.

The paper describes basic transfer pricing methods (e.g., cost plus, sales minus) and a framework for developing a consistent transfer pricing system as a consistent set of transfer prices for transactions using the basic methods and meeting managerial and fiscal requirements.

An Interdistrict Transfer Program

Science.gov (United States)

Gross, Norman

1975-01-01

This testimony, before the May 1974 public hearings of the New York City Commission on Human Rights by the Administrator, Urban-Suburban Transfer Program and Inter district Transfer Program, West Irondequoit School District, New York, reviews a program which began with 25 minority group youngsters from one racially-imbalanced Rochester school…

Heat transfer in Rockwool modelling and method of measurement. Modelling radiative heat transfer in fibrous materials

Energy Technology Data Exchange (ETDEWEB)

Dyrboel, Susanne

1998-05-01

Fibrous materials are some of the most widely used materials for thermal insulation. In this project the focus of interest has been on fibrous materials for building application. Interest in improving the thermal properties of insulation materials is increasing as legislation is being tightened to reduce the overall energy consumption. A knowledge of the individual heat transfer mechanisms - whereby heat is transferred within a particular material is an essential tool to improve continuously the thermal properties of the material. Heat is transferred in fibrous materials by four different transfer mechanisms: conduction through air, conduction through fibres, thermal radiation and convection. In a particular temperature range the conduction through air can be regarded as a constant, and conduction through fibres is an insignificant part of the total heat transfer. Radiation, however, constitutes 25-40% of the total heat transfer in light fibrous materials. In Denmark and a number of other countries convection in fibrous materials is considered as non-existent when calculating heat transmission as well as when designing building structures. Two heat transfer mechanisms have been the focus of the current project: radiation heat transfer and convection. The radiation analysis serves to develop a model that can be used in further work to gain a wider knowledge of the way in which the morphology of the fibrous material, i.e. fibre diameter distribution, fibre orientation distribution etc., influences the radiation heat transfer under different conditions. The convection investigation serves to examine whether considering convection as non-existent is a fair assumption to use in present and future building structures. The assumption applied in practically is that convection makes a notable difference only in very thick insulation, at external temperatures below -20 deg. C, and at very low densities. For lager thickness dimensions the resulting heat transfer through the

78 FR 8686 - Establishment of the National Freight Network

Science.gov (United States)

2013-02-06

... includes the National Highway System, freight intermodal connectors, and aerotropolis \\1\\ transportation systems. \\1\\ Aerotropolis transportation systems means a planned and coordinated multimodal freight and...

Center for Coastline Security Technology, Year-2

National Research Council Canada - National Science Library

Glegg, Stewart; Glenn, William; Furht, Borko; Beaujean, P. P; Frisk, G; Schock, S; VonEllenrieder, K; Ananthakrishnan, P; An, E; Granata, R

2007-01-01

...), the Imaging Technology Center, the Department of Computer Science and Engineering, and the University Consortium for Intermodal Transportation Safety and Security at Florida Atlantic University...

Analysing CMS transfers using Machine Learning techniques

CERN Document Server

Diotalevi, Tommaso

2016-01-01

LHC experiments transfer more than 10 PB/week between all grid sites using the FTS transfer service. In particular, CMS manages almost 5 PB/week of FTS transfers with PhEDEx (Physics Experiment Data Export). FTS sends metrics about each transfer (e.g. transfer rate, duration, size) to a central HDFS storage at CERN. The work done during these three months, here as a Summer Student, involved the usage of ML techniques, using a CMS framework called DCAFPilot, to process this new data and generate predictions of transfer latencies on all links between Grid sites. This analysis will provide, as a future service, the necessary information in order to proactively identify and maybe fix latency issued transfer over the WLCG.

The Knowledge Dimension of Production Transfer

DEFF Research Database (Denmark)

Riis, Jens Ove; Wæhrens, Brian Vejrum; Madsen, Erik Skov

2010-01-01

Empirical studies in three industrial companies have revealed that even companies with many years of experience in production transfer tend to focus attention on planning the physical transfer and on the explicit knowledge associated with normal production. They are uncertain about capturing, trans......­ferring and developing tacit knowledge. Supported by studies in the literature it is concluded that there is a need for a more systematic approach to knowledge transfer and development to provide an accelerated ramp-up after the physical transfer. A framework will be structured around a generic set of phases...... of the transfer process, and a distinction between the sending and the receiving orga­nizational unit. A method for capturing the tacit knowledge embedded in a pro­duction job has been developed and tested. The framework and the method will provide a basis for preparing a master plan for knowledge transfer...

Laser induced forward transfer of graphene

NARCIS (Netherlands)

Smits, E.C.P.; Walter, A.; Leeuw, D.M. de; Asadi, K.

2017-01-01

Transfer of graphene and other two-dimensional materials is still a technical challenge. The 2D-materials are typically patterned after transfer, which leads to a major loss of material. Here, we present laser induced forward transfer of chemical vapor deposition grown graphene layers with

The transfer of radiocaesium to ewes through a breeding cycle - an illustration of the pitfalls of the transfer coefficient

International Nuclear Information System (INIS)

Beresford, N.A.; Mayes, R.W.; Barnett, C.L.; Howard, B.J.

2007-01-01

A study to measure the transfer of radiocaesium to adult female sheep through a breeding cycle is described. The transfer of radiocaesium from the diet to muscle (estimated as the equilibrium transfer coefficient) was significantly lower to pregnant, and especially lactating, animals compared to non-lactating and barren animals. High dry matter intake rates were also associated with significantly lower transfer coefficients. Known relationships between dry matter intake rates and protein turnover could credibly explain some of these differences. However, when described as the concentration ratio, radiocaesium transfer to meat was apparently highest during lactation. The apparent difference in results obtained by the two approaches of determining transfer is the consequence of daily dry matter intake being a denominator within the estimation of transfer coefficient. A wider discussion of transfer coefficients and concentration ratios leads us to suggest that the concentration ratio is the more robust and potentially generic parameter

The transfer of radiocaesium to ewes through a breeding cycle - an illustration of the pitfalls of the transfer coefficient

Energy Technology Data Exchange (ETDEWEB)

Beresford, N.A. [Centre for Ecology and Hydrology, CEH-Lancaster, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster LA1 4AP (United Kingdom)], E-mail: nab@ceh.ac.uk; Mayes, R.W. [Macaulay Land Use Research Institute, Craigiebuckler, Aberdeen AB15 8QH (United Kingdom); Barnett, C.L.; Howard, B.J. [Centre for Ecology and Hydrology, CEH-Lancaster, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster LA1 4AP (United Kingdom)

2007-11-15

A study to measure the transfer of radiocaesium to adult female sheep through a breeding cycle is described. The transfer of radiocaesium from the diet to muscle (estimated as the equilibrium transfer coefficient) was significantly lower to pregnant, and especially lactating, animals compared to non-lactating and barren animals. High dry matter intake rates were also associated with significantly lower transfer coefficients. Known relationships between dry matter intake rates and protein turnover could credibly explain some of these differences. However, when described as the concentration ratio, radiocaesium transfer to meat was apparently highest during lactation. The apparent difference in results obtained by the two approaches of determining transfer is the consequence of daily dry matter intake being a denominator within the estimation of transfer coefficient. A wider discussion of transfer coefficients and concentration ratios leads us to suggest that the concentration ratio is the more robust and potentially generic parameter.

Waste Feed Delivery Transfer System Analysis

Energy Technology Data Exchange (ETDEWEB)

JULYK, L.J.

2000-05-05

This document provides a documented basis for the required design pressure rating and pump pressure capacity of the Hanford Site waste-transfer system in support of the waste feed delivery to the privatization contractor for vitrification. The scope of the analysis includes the 200 East Area double-shell tank waste transfer pipeline system and the associated transfer system pumps for a11 Phase 1B and Phase 2 waste transfers from AN, AP, AW, AY, and A2 Tank Farms.

Waste Feed Delivery Transfer System Analysis

International Nuclear Information System (INIS)

JULYK, L.J.

2000-01-01

This document provides a documented basis for the required design pressure rating and pump pressure capacity of the Hanford Site waste-transfer system in support of the waste feed delivery to the privatization contractor for vitrification. The scope of the analysis includes the 200 East Area double-shell tank waste transfer pipeline system and the associated transfer system pumps for a11 Phase 1B and Phase 2 waste transfers from AN, AP, AW, AY, and A2 Tank Farms

45 CFR 2530.60 - What is the impact of transferring or receiving a transferred education award on an individual's...

Science.gov (United States)

2010-10-01

... transferred education award on an individual's eligibility to receive additional education awards? 2530.60... AND COMMUNITY SERVICE TRANSFER OF EDUCATION AWARDS § 2530.60 What is the impact of transferring or receiving a transferred education award on an individual's eligibility to receive additional education...

Oxygen transfer in slurry bioreactors.

Science.gov (United States)

Kawase, Y; Moo-Young, M

1991-04-25

The oxygen transfer in bioreactors with slurries having a yield stress was investigated. The volumetric mass transfer coefficients in a 40-L bubble column with simulated fermentation broths, the Theological properties of which were represented by the Casson model, were measured. Experimental data were compared with a theoretical correlation developed on the basis of a combination of Higbie's penetration theory and Kolmogoroff's theory of isotropic turbulence. Comparisons between the proposed correlation and data for the simulated broths show good agreement. The mass transfer data for actual mycelial fermentation broths reported previously by the authors were re-examined. Their Theological data was correlated by the Bingham plastic model. The oxygen transfer rate data in the mycelial fermentation broths fit the predictions of the proposed theoretical correlation.

Single-Molecule Interfacial Electron Transfer

Energy Technology Data Exchange (ETDEWEB)

Lu, H. Peter [Bowling Green State Univ., Bowling Green, OH (United States). Dept. of Chemistry and Center for Photochemical Sciences

2017-11-28

This project is focused on the use of single-molecule high spatial and temporal resolved techniques to study molecular dynamics in condensed phase and at interfaces, especially, the complex reaction dynamics associated with electron and energy transfer rate processes. The complexity and inhomogeneity of the interfacial ET dynamics often present a major challenge for a molecular level comprehension of the intrinsically complex systems, which calls for both higher spatial and temporal resolutions at ultimate single-molecule and single-particle sensitivities. Combined single-molecule spectroscopy and electrochemical atomic force microscopy approaches are unique for heterogeneous and complex interfacial electron transfer systems because the static and dynamic inhomogeneities can be identified and characterized by studying one molecule at a specific nanoscale surface site at a time. The goal of our project is to integrate and apply these spectroscopic imaging and topographic scanning techniques to measure the energy flow and electron flow between molecules and substrate surfaces as a function of surface site geometry and molecular structure. We have been primarily focusing on studying interfacial electron transfer under ambient condition and electrolyte solution involving both single crystal and colloidal TiO₂ and related substrates. The resulting molecular level understanding of the fundamental interfacial electron transfer processes will be important for developing efficient light harvesting systems and broadly applicable to problems in fundamental chemistry and physics. We have made significant advancement on deciphering the underlying mechanism of the complex and inhomogeneous interfacial electron transfer dynamics in dyesensitized TiO₂ nanoparticle systems that strongly involves with and regulated by molecule-surface interactions. We have studied interfacial electron transfer on TiO₂ nanoparticle surfaces by using ultrafast single

Software engineering technology transfer: Understanding the process

Science.gov (United States)

Zelkowitz, Marvin V.

1993-01-01

Technology transfer is of crucial concern to both government and industry today. In this report, the mechanisms developed by NASA to transfer technology are explored and the actual mechanisms used to transfer software development technologies are investigated. Time, cost, and effectiveness of software engineering technology transfer is reported.

Heat transfer enhancement on nucleate boiling

International Nuclear Information System (INIS)

Zhuang, M.; Guibai, L.

1990-01-01

This paper reports on enhancement of nucleate boiling heat transfer with additives that was investigated experimentally. More than fifteen kinds of additives were chosen and tested. Eight kinds of effective additives which can enhance nucleate boiling heat transfer were selected. Experimental results showed that boiling heat transfer coefficient of water was increased by 1 to 5 times and that of R-113 was increased by 1 to 4 times when trace amount additives were put in the two boiling liquids. There exist optimum concentrations for the additives, respectively, which can enhance nucleate boiling heat transfer rate best. In order to analyze the mechanism of the enhancement of boiling heat transfer with additives, the surface tension and the bubble departure diameter were measured. The nucleation sites were investigated by use of high-speed photograph. Experimental results showed that nucleation sites increase with additive amount increasing and get maximum. Increasing nucleation sites is one of the most important reason why nucleate boiling heat transfer can be enhanced with additives

[Transference and countertransference in Gestalt therapy].

Science.gov (United States)

Schnake Silva, A

1981-01-01

The aim is to demonstrate the presence of transference within Gestalt Psychotherapy, opinion not shared by many gestaltists. For this purpose she includes Freud's findings and comments on transference. She also takes into consideration Jung's and Melanie Klein's concepts on transference. The author concludes that transference is in Psychoanalysis a decisive concept in diagnosing and defining a prognosis. She refers to the fact that in Gestalt Psychotherapy the patient projects on the therapist disturbed aspects of his personallity as well as healthy ones, which determines the characteristics of the relationship. In Gestalt Therapy transference is made easy by the self-responsibility the patient has to assume in the process. Within this frame-work some of the techniques which facilitate the use of transference are mentioned: gestual observation, conscience awareness, an alliance with the healthful aspects of the patient, work in the "here-and-now", clarifying projections, switch from environmental support to inner support.

Prospects for Money Transfer Models

OpenAIRE

Yougui Wang; Ning Ding; Ning Xi

2005-01-01

Recently, in order to explore the mechanism behind wealth or income distribution, several models have been proposed by applying principles of statistical mechanics. These models share some characteristics, such as consisting of a group of individual agents, a pile of money and a specific trading rule. Whatever the trading rule is, the most noteworthy fact is that money is always transferred from one agent to another in the transferring process. So we call them money transfer models. Besides e...

Transportation

National Research Council Canada - National Science Library

Adams, James; Carr, Ron; Chebl, Maroun; Coleman, Robert; Costantini, William; Cox, Robert; Dial, William; Jenkins, Robert; McGovern, James; Mueller, Peter

2006-01-01

...., trains, ships, etc.) and maximizing intermodal efficiency. A healthy balance must be achieved between the flow of international commerce and security requirements regardless of transportation mode...

Californium source transfer

International Nuclear Information System (INIS)

Wallace, C.R.

1995-01-01

In early 1995, the receipt of four sealed californium-252 sources from Oak Ridge National Lab was successfully accomplished by a team comprised of Radiological Engineering, Radiological Operations and Health Physics Instrumentation personnel. A procedure was developed and walked-down by the participants during a Dry Run Evolution. Several special tools were developed during the pre-planning phases of the project which reduced individual and job dose to minimal levels. These included a mobile lifting device for attachment of a transfer ball valve assembly to the undercarriage of the Cannonball Carrier, a transfer tube elbow to ensure proper angle of the source transfer tube, and several tools used during emergency response for remote retrieval and handling of an unshielded source. Lessons were learned in the areas of contamination control, emergency preparedness, and benefits of thorough pre-planning, effectiveness of locally creating and designing special tools to reduce worker dose, and methods of successfully accomplishing source receipt evolutions during extreme or inclement weather

Remote transfer of PET images by internet

International Nuclear Information System (INIS)

Zuo Chuantao; Lin Xiangtong; Guan Yihui; Zhao Jun

2003-01-01

The methodology of PET image remote transfer by Internet has been explored. The original images were got with ECAT EXACT HR + PET, and then converted to Dicom format by Mview software. The Dicom images were transferred via Internet. Thus the PET images were transferred via Internet successfully. The ideal images were obtained away from 8 km. The transfer time of brain and whole body image was (37±3)s and (245±10)s respectively, while the transfer rate was (34.7±2.8) kbyte/s and (34.4±1.5)kbyte/s, respectively. The results showed that the remote transfer via Internet was feasible and practical

Innovative technology transfer of nondestructive evaluation research

Science.gov (United States)

Brian Brashaw; Robert J. Ross; Xiping Wang

2008-01-01

Technology transfer is often an afterthought for many nondestructive evaluation (NDE) researchers. Effective technology transfer should be considered during the planning and execution of research projects. This paper outlines strategies for using technology transfer in NDE research and presents a wide variety of technology transfer methods used by a cooperative...

Radioactivity transfer to animal products

International Nuclear Information System (INIS)

Coughtrey, P.J.

1990-01-01

Information on the behaviour of strontium, caesium, ruthenium, plutonium and americium in a range of domestic animals is reviewed to form a basis for the specification of time-dependent mathematical models describing uptake, distribution and retention in various domestic animals. Transfer factors relating concentration in animal product to daily radioactivity intake are derived after 100 d continuous intake and at equilibrium. These transfer factors are compared with the available published literature and used as a basis for the derivation of feedingstuff conversion factors relating limiting concentrations in animal feedingstuffs to limiting concentrations in human foodstuffs for application to animals receiving commercial feedingstuffs after a nuclear accident. Recommended transfer factors for animal products in conditions of continuous discharge and models for application to field conditions after a nuclear accident are also presented. Transfer of caesium to animal products is more effective than that for the other elements considered here. Transfer to meat of lamb, fattening pig, and chickens is generally more effective than that for other animals and other products

75 FR 9120 - Electronic Fund Transfers

Science.gov (United States)

2010-03-01

... FEDERAL RESERVE SYSTEM 12 CFR Part 205 [Regulation E; Docket No. R-1343] Electronic Fund Transfers... implements the Electronic Fund Transfer Act, and the official staff commentary to the regulation. The final..., the Board adopted a final rule under Regulation E, which implements the Electronic Fund Transfer Act...

27 CFR 24.282 - Multiple transfers.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Multiple transfers. 24.282 Section 24.282 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT... transfer record for all wine (including distilling material and vinegar stock) transferred by pipeline to...

Transfer involving deformed nuclei

International Nuclear Information System (INIS)

Rasmussen, J.O.; Guidry, M.W.; Canto, L.F.

1985-03-01

Results are reviewed of 1- and 2-neutron transfer reactions at near-barrier energies for deformed nuclei. Rotational angular momentum and excitation patterns are examined. A strong tendency to populating high spin states within a few MeV of the yrast line is noted, and it is interpreted as preferential transfer to rotation-aligned states. 16 refs., 12 figs

Transfer Entropy as a Log-Likelihood Ratio

Science.gov (United States)

Barnett, Lionel; Bossomaier, Terry

2012-09-01

Transfer entropy, an information-theoretic measure of time-directed information transfer between joint processes, has steadily gained popularity in the analysis of complex stochastic dynamics in diverse fields, including the neurosciences, ecology, climatology, and econometrics. We show that for a broad class of predictive models, the log-likelihood ratio test statistic for the null hypothesis of zero transfer entropy is a consistent estimator for the transfer entropy itself. For finite Markov chains, furthermore, no explicit model is required. In the general case, an asymptotic χ2 distribution is established for the transfer entropy estimator. The result generalizes the equivalence in the Gaussian case of transfer entropy and Granger causality, a statistical notion of causal influence based on prediction via vector autoregression, and establishes a fundamental connection between directed information transfer and causality in the Wiener-Granger sense.

Technology transfer at CERN a study on inter-organizational knowledge transfer within multi-national R&D collaborations

CERN Document Server

Huuse, H; Streit-Bianchi, M

2004-01-01

This study focus on the knowledge aspect of inter-organizational technology transfer projects. We have studied two large R&D collaborations where CERN is involved as one of several participating organizations, in order to reveal the causalities related to the knowledge transfer processes within these projects. The objective of the study is to understand how knowledge transfer happens, identify influencing factors to the process, and finally investigate the outcome of such processes. The study is founded on a thorough literature review where we examine different aspects of inter-organizational knowledge transfer. Based on the theory, we develop an analytic framework and establish different elements in the knowledge transfer process to study in more detail. This framework illustrates the relation between the different elements in a knowledge transfer process and provides the structure for our empirical foundation. We perform an explanatory embedded multiple case study and analyze our findings in terms of th...

Status report on radionuclide transfer

International Nuclear Information System (INIS)

1980-01-01

At the suggestion of the Federal Minstry of the Interior, in June 1978, a group of scientists from several institutions who are active in the field of radionuclide transfer or are interested in these problems got together. During the discussions of the work team, especially the transfer soil/plants was emphasized. Then the work team set up a status report on the transfer of the radionuclides relevant in the sense of the radiation protection act. The nuclides H 3 and C14, the isotopes of the Sr, J, and Cs, Tc99, the so-called corrosion nuclides Mn54, Fe59, co-isotopes and Zn65, and isotopes of Pu, Am, and Cm were regarded as important for a possible radiation exposition. Recent investigations revealed that also the natural radionuclides Ra226, Po210, and Pb210 should be covered by the investigations. The goal of this status report is to present the level of knowledge on the transfer of these radionuclides to man in a brief form, giving hints at the most important literature. It was requested by the Federal Ministry of the Interior, as fas as possible, to indicate transfer factors which are necessary for the radio-occology act to be decreed according to Para. 45 of the radiation protection act. Another goal of the report was to show the gap in the knowledge on the radio nuclide transfer. This was thought to help to create a basis for the decisions of the Federal Ministry concerning the support of other investigation projects in the field of transfer of radionuclides. (orig./MG) [de

Energy transfer properties and mechanisms

International Nuclear Information System (INIS)

Barker, J.R.

1993-01-01

Since no single experimental technique is the best method for energy transfer experiments, we have used both time-dependent infrared fluorescence (IRF) and time-dependent thermal lensing (TDTL) to study energy transfer in various systems. We are investigating pump-probe techniques employing resonance enhanced multiphoton ionization (REMPI). IRF was used to study benzene, azulene, and toluene. TDTL was used to study CS 2 and SO 2 (data not given for latter). Large molecule energy transfer mechanisms are discussed. 10 figs

Coherently Enhanced Wireless Power Transfer

OpenAIRE

Krasnok, Alex; Baranov, Denis G.; Generalov, Andrey; Li, Sergey; Alu, Andrea

2017-01-01

Extraction of electromagnetic energy by an antenna from impinging external radiation is at the basis of wireless communications and power transfer (WPT). The maximum of transferred energy is ensured when the antenna is conjugately matched, i.e., when it is resonant and it has an equal coupling with free space and its load, which is not easily implemented in near-field WPT. Here, we introduce the concept of coherently enhanced wireless power transfer. We show that a principle similar to the on...

The CANDU 9 fuel transfer system

International Nuclear Information System (INIS)

Keszthelyi, Z.G.; Morikawa, D.T.

1996-01-01

The CANDU 9 fuel transfer system is based on the CANDU 6 and the Ontario Hydro Darlington NGD designs, modified to suit the CANDU 9 requirements. The CANDU 9 new fuel transfer system is very similar to the CANDU 6, with modifications to allow new fuel loading from outside containment, similar to Darlington. The CANDU 9 irradiated fuel transfer system is based on the Darlington irradiated fuel transfer system, with modifications to meet the more stringent containment requirements, improve performance, and match station layout. (author). 2 refs., 6 figs

Abusive Transfer Pricing and Economic Activity

DEFF Research Database (Denmark)

Nielsen, Søren Bo; Schindler, Dirk; Schjelderup, Guttorm

This paper investigates how concealment costs of transfer pricing and the probability of detection affect transfer pricing and firm behavior. We find that transfer pricing in intermediate production factors does not affect real activity of a multinational firm if the firm’s concealment effort...... its production structure. A policy implication of the paper is that it should be preferable to condition audits on the amount of income shifted rather than on the distortion of the transfer price proper. Another policy finding is that improving the quality of tax law might be superior to higher...

The CANDU 9 fuel transfer system

Energy Technology Data Exchange (ETDEWEB)

Keszthelyi, Z G [Canadian General Electric Co. Ltd., Peterborough, ON (Canada); Morikawa, D T [Atomic Energy of Canada Ltd., Mississauga, ON (Canada)

1997-12-31

The CANDU 9 fuel transfer system is based on the CANDU 6 and the Ontario Hydro Darlington NGD designs, modified to suit the CANDU 9 requirements. The CANDU 9 new fuel transfer system is very similar to the CANDU 6, with modifications to allow new fuel loading from outside containment, similar to Darlington. The CANDU 9 irradiated fuel transfer system is based on the Darlington irradiated fuel transfer system, with modifications to meet the more stringent containment requirements, improve performance, and match station layout. (author). 2 refs., 6 figs.

Facilities of fuel transfer for nuclear reactors

International Nuclear Information System (INIS)

Wade, E.E.

1977-01-01

This invention relates to sodium cooled fast breeder reactors. It particularly concerns facilities for the transfer of fuel assemblies between the reactor core and a fuel transfer area. The installation is simple in construction and enables a relatively small vessel to be used. In greater detail, the invention includes a vessel with a head, fuel assemblies housed in this vessel, and an inlet and outlet for the coolant covering these fuel assemblies. The reactor has a fuel transfer area in communication with this vessel and gear inside the vessel for the transfer of these fuel assemblies. These facilities are borne by the vessel head and serve to transfer the fuel assemblies from the vessel to the transfer area; whilst leaving the fuel assemblies completely immersed in a continuous mass of coolant. A passageway is provided between the vessel and this transfer area for the fuel assemblies. Facilities are provided for closing off this passageway so that the inside of the reactor vessel may be isolated as desired from this fuel transfer area whilst the reactor is operating [fr

Station Transfers

Data.gov (United States)

Department of Homeland Security — ixed rail transit external system transfers for systems within the Continental United States, Alaska, Hawaii, the District of Columbia, and Puerto Rico. The modes of...

Styring af international transfer pricing

DEFF Research Database (Denmark)

Reuther, Peter; Rossing, Christian Plesner

2011-01-01

Nærværende artikel introducerer international transfer pricing, dels som et skatteretligt fænomen og dels som et værktøj til planlægning og økonomisk styring af koncernforbundne selskaber i en multinational virksomhed (MNV). Med udgangspunkt i en case-analyse af MNV’en gives der et konkret eksempel...... på hvordan transfer pricing håndteres i praksis. Artiklens formål er at give et praktisk eksempel på at transfer pricing handler om at efterleve regler, ikke omgå dem. På baggrund af case-analysen argumenteres der for, at såvel akademikere som praktikere bør tage virksomhedens tilgang til...... international transfer pricing i betragtning, når økonomiske styringssystemer i en MNV skal anvendes til planlægning og opfølgning....

Transferring lean management infrastructure for increasing productivity

Directory of Open Access Journals (Sweden)

Ph.D.Daniel Georgescu

2010-12-01

Full Text Available These years, manufacturing function have been transferred rapidly and globally from matured countries to emerging countries. In this paper is about the critical elements for successful transfer of lean management among sites and countries. Based on this general descriptive analysis, current global transfer activity of Lean as well as its future direction is also described. According to the gradual progress of lean management transfer, necessity of its refinement/reinforcement is recognized and some research subjects are proposed for contributing further encouragement of its global activities. In this paper, based on this understanding, requisites for transfer of lean management are discussed through investigating global activity of Lean and specification of infrastructure enabling its smooth transfer is examined

75 FR 57252 - Designated Transfer Date

Science.gov (United States)

2010-09-20

..., as the date for the transfer of functions to the Bureau of Consumer Financial Protection (``CFPB... other laws. After consulting with the heads of the agencies whose functions will transfer to the CFPB... July 21, 2011, as the transfer date will advance the mission of the CFPB and promote an orderly and...

40 CFR 63.1105 - Transfer racks.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Transfer racks. 63.1105 Section 63... Technology Standards § 63.1105 Transfer racks. (a) Design requirements. The owner or operator shall equip each transfer rack with one of the control options listed in paragraphs (a)(1) through (4) of this...

Boiling Heat Transfer to Halogenated Hydrocarbon Refrigerants

Science.gov (United States)

Yoshida, Suguru; Fujita, Yasunobu

The current state of knowledge on heat transfer to boiling refrigerants (halogenated hydrocarbons) in a pool and flowing inside a horizontal tube is reviewed with an emphasis on information relevant to the design of refrigerant evaporators, and some recommendations are made for future research. The review covers two-phase flow pattern, heat transfer characteristics, correlation of heat transfer coefficient, influence of oil, heat transfer augmentation, boiling from tube-bundle, influence of return bend, burnout heat flux, film boiling, dryout and post-dryout heat transfer.

Economic Feasibility Analysis Report. Strategic Mobility 21

National Research Council Canada - National Science Library

Mallon, Lawrence G; Monaco, Kristen; Fetty, George R

2007-01-01

.... This multi-disciplinary analysis provides an objective examination of the economic and operational feasibility of a shuttle train intermodal rail operation under various scenarios connecting the San...

Second Chances: Investigating Athletes' Experiences of Talent Transfer.

Directory of Open Access Journals (Sweden)

Áine MacNamara

Full Text Available Talent transfer initiatives seek to transfer talented, mature individuals from one sport to another. Unfortunately talent transfer initiatives seem to lack an evidence-based direction and a rigorous exploration of the mechanisms underpinning the approach. The purpose of this exploratory study was to identify the factors which successfully transferring athletes cite as facilitative of talent transfer. In contrast to the anthropometric and performance variables that underpin current talent transfer initiatives, participants identified a range of psycho-behavioral and environmental factors as key to successful transfer. We argue that further research into the mechanisms of talent transfer is needed in order to provide a strong evidence base for the methodologies employed in these initiatives.

Second Chances: Investigating Athletes' Experiences of Talent Transfer.

Science.gov (United States)

MacNamara, Áine; Collins, Dave

2015-01-01

Talent transfer initiatives seek to transfer talented, mature individuals from one sport to another. Unfortunately talent transfer initiatives seem to lack an evidence-based direction and a rigorous exploration of the mechanisms underpinning the approach. The purpose of this exploratory study was to identify the factors which successfully transferring athletes cite as facilitative of talent transfer. In contrast to the anthropometric and performance variables that underpin current talent transfer initiatives, participants identified a range of psycho-behavioral and environmental factors as key to successful transfer. We argue that further research into the mechanisms of talent transfer is needed in order to provide a strong evidence base for the methodologies employed in these initiatives.

Second Chances: Investigating Athletes’ Experiences of Talent Transfer

Science.gov (United States)

2015-01-01

Talent transfer initiatives seek to transfer talented, mature individuals from one sport to another. Unfortunately talent transfer initiatives seem to lack an evidence-based direction and a rigorous exploration of the mechanisms underpinning the approach. The purpose of this exploratory study was to identify the factors which successfully transferring athletes cite as facilitative of talent transfer. In contrast to the anthropometric and performance variables that underpin current talent transfer initiatives, participants identified a range of psycho-behavioral and environmental factors as key to successful transfer. We argue that further research into the mechanisms of talent transfer is needed in order to provide a strong evidence base for the methodologies employed in these initiatives. PMID:26600303

Knowledge transfer and expatriation practices in MNCs

DEFF Research Database (Denmark)

Minbaeva, Dana; Michailova, Snejina

2003-01-01

) the willingness ofexpatriates to transfer the knowledge they possess from the headquarters to therespective subsidiaries. By stepping on two bodies of literature, namely theknowledge transfer literature and the expatriation literature, we suggest that MNCsmay enhance the expatriates' willingness to transfer...... 92 subsidiaries of Danish MNCslocated in 11 countries.Key words: knowledge transfer, MNC, expatriation, dissemination capacity...

TRANSFER

African Journals Online (AJOL)

This paper reports on further studies on long range energy transfer between curcumine as donor and another thiazine dye, thionine, which is closely related to methylene blue as energy harvester (Figure 1). Since thionine is known to have a higher quantum yield of singlet oxygen sensitization than methylene blue [8], it is ...

Engineering calculations in radiative heat transfer

CERN Document Server

Gray, W A; Hopkins, D W

1974-01-01

Engineering Calculations in Radiative Heat Transfer is a six-chapter book that first explains the basic principles of thermal radiation and direct radiative transfer. Total exchange of radiation within an enclosure containing an absorbing or non-absorbing medium is then described. Subsequent chapters detail the radiative heat transfer applications and measurement of radiation and temperature.

Multichannel transfer function with dimensionality reduction

KAUST Repository

Kim, Han Suk

2010-01-17

The design of transfer functions for volume rendering is a difficult task. This is particularly true for multi-channel data sets, where multiple data values exist for each voxel. In this paper, we propose a new method for transfer function design. Our new method provides a framework to combine multiple approaches and pushes the boundary of gradient-based transfer functions to multiple channels, while still keeping the dimensionality of transfer functions to a manageable level, i.e., a maximum of three dimensions, which can be displayed visually in a straightforward way. Our approach utilizes channel intensity, gradient, curvature and texture properties of each voxel. The high-dimensional data of the domain is reduced by applying recently developed nonlinear dimensionality reduction algorithms. In this paper, we used Isomap as well as a traditional algorithm, Principle Component Analysis (PCA). Our results show that these dimensionality reduction algorithms significantly improve the transfer function design process without compromising visualization accuracy. In this publication we report on the impact of the dimensionality reduction algorithms on transfer function design for confocal microscopy data.

Appetitive Pavlovian-instrumental Transfer: A review.

Science.gov (United States)

Cartoni, Emilio; Balleine, Bernard; Baldassarre, Gianluca

2016-12-01

Reward-related cues are an important part of our daily life as they often influence and guide our actions. This paper reviews one of the experimental paradigms used to study the effects of cues, the Pavlovian to Instrumental Transfer paradigm. In this paradigm, cues associated with rewards through Pavlovian conditioning alter motivation and choice of instrumental actions. The first transfer experiments date back to the 1940s, but only in the last decade has it been fully recognised that there are two types of transfer, specific and general. This paper presents a systematic review of both the neural substrates and the behavioral factors affecting both types of transfer. It also examines the recent application of the paradigm to study the effect of cues on human participants, both in normal and pathological conditions, and the interactions of transfer with drugs of abuse. Finally, the paper analyses the theoretical aspects of transfer to build an overall picture of the phenomenon, from early theories to recent hierarchical accounts. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Penning transfer in argon-based gas mixtures

CERN Document Server

Sahin, O; Tapan, I; Ozmutlu, E N

2010-01-01

Penning transfers, a group of processes by which excitation energy is used to ionise the gas, increase the gas gain in some detectors. Both the probability that such transfers occur and the mechanism by which the transfer takes place, vary with the gas composition and pressure. With a view to developing a microscopic electron transport model that takes Penning transfers into account, we use this dependence to identify the transfer mechanisms at play. We do this for a number of argon-based gas mixtures, using gain curves from the literature.

Solar sail time-optimal interplanetary transfer trajectory design

International Nuclear Information System (INIS)

Gong Shengpin; Gao Yunfeng; Li Junfeng

2011-01-01

The fuel consumption associated with some interplanetary transfer trajectories using chemical propulsion is not affordable. A solar sail is a method of propulsion that does not consume fuel. Transfer time is one of the most pressing problems of solar sail transfer trajectory design. This paper investigates the time-optimal interplanetary transfer trajectories to a circular orbit of given inclination and radius. The optimal control law is derived from the principle of maximization. An indirect method is used to solve the optimal control problem by selecting values for the initial adjoint variables, which are normalized within a unit sphere. The conditions for the existence of the time-optimal transfer are dependent on the lightness number of the sail and the inclination and radius of the target orbit. A numerical method is used to obtain the boundary values for the time-optimal transfer trajectories. For the cases where no time-optimal transfer trajectories exist, first-order necessary conditions of the optimal control are proposed to obtain feasible solutions. The results show that the transfer time decreases as the minimum distance from the Sun decreases during the transfer duration. For a solar sail with a small lightness number, the transfer time may be evaluated analytically for a three-phase transfer trajectory. The analytical results are compared with previous results and the associated numerical results. The transfer time of the numerical result here is smaller than the transfer time from previous results and is larger than the analytical result.

CANISTER TRANSFER SYSTEM DESCRIPTION DOCUMENT

International Nuclear Information System (INIS)

B. Gorpani

2000-01-01

The Canister Transfer System receives transportation casks containing large and small disposable canisters, unloads the canisters from the casks, stores the canisters as required, loads them into disposal containers (DCs), and prepares the empty casks for re-shipment. Cask unloading begins with cask inspection, sampling, and lid bolt removal operations. The cask lids are removed and the canisters are unloaded. Small canisters are loaded directly into a DC, or are stored until enough canisters are available to fill a DC. Large canisters are loaded directly into a DC. Transportation casks and related components are decontaminated as required, and empty casks are prepared for re-shipment. One independent, remotely operated canister transfer line is provided in the Waste Handling Building System. The canister transfer line consists of a Cask Transport System, Cask Preparation System, Canister Handling System, Disposal Container Transport System, an off-normal canister handling cell with a transfer tunnel connecting the two cells, and Control and Tracking System. The Canister Transfer System operating sequence begins with moving transportation casks to the cask preparation area with the Cask Transport System. The Cask Preparation System prepares the cask for unloading and consists of cask preparation manipulator, cask inspection and sampling equipment, and decontamination equipment. The Canister Handling System unloads the canister(s) and places them into a DC. Handling equipment consists of a bridge crane hoist,; DC--loading manipulator, lifting fixtures, and small canister staging racks. Once the cask has been unloaded, the Cask Preparation System decontaminates the cask exterior and returns it to the Carrier/Cask Handling System via the Cask Transport System. After the; DC--is fully loaded, the Disposal Container Transport System moves the; DC--to the Disposal Container Handling System for welding. To handle off-normal canisters, a separate off-normal canister

Canister Transfer System Description Document

International Nuclear Information System (INIS)

2000-01-01

The Canister Transfer System receives transportation casks containing large and small disposable canisters, unloads the canisters from the casks, stores the canisters as required, loads them into disposal containers (DCs), and prepares the empty casks for re-shipment. Cask unloading begins with cask inspection, sampling, and lid bolt removal operations. The cask lids are removed and the canisters are unloaded. Small canisters are loaded directly into a DC, or are stored until enough canisters are available to fill a DC. Large canisters are loaded directly into a DC. Transportation casks and related components are decontaminated as required, and empty casks are prepared for re-shipment. One independent, remotely operated canister transfer line is provided in the Waste Handling Building System. The canister transfer line consists of a Cask Transport System, Cask Preparation System, Canister Handling System, Disposal Container Transport System, an off-normal canister handling cell with a transfer tunnel connecting the two cells, and Control and Tracking System. The Canister Transfer System operating sequence begins with moving transportation casks to the cask preparation area with the Cask Transport System. The Cask Preparation System prepares the cask for unloading and consists of cask preparation manipulator, cask inspection and sampling equipment, and decontamination equipment. The Canister Handling System unloads the canister(s) and places them into a DC. Handling equipment consists of a bridge crane/hoist, DC loading manipulator, lifting fixtures, and small canister staging racks. Once the cask has been unloaded, the Cask Preparation System decontaminates the cask exterior and returns it to the Carrier/Cask Handling System via the Cask Transport System. After the DC is fully loaded, the Disposal Container Transport System moves the DC to the Disposal Container Handling System for welding. To handle off-normal canisters, a separate off-normal canister handling

TRANSFER PRICING AS A SYSTEM-FACTOR

Directory of Open Access Journals (Sweden)

L. M. Guisin

2011-01-01

Full Text Available It is proposed that transfer pricing plays a system-building role for multi-profile commercial banks of today. Bank transfer pricing system properties are outlined. Examples of practical implementation of the transfer pricing to bank activities are brought about. Impact of transferprices on key aspects of the bank management and control system is discussed.

Mass transfer in nano-fluids: A review

International Nuclear Information System (INIS)

Ashrafmansouri, Seyedeh-Saba; Esfahany, Mohsen Nasr

2014-01-01

Growing attention has been recently paid to nano-fluids because of their potential for augmenting transfer processes - i.e., heat and mass transfer. Conflicting results have been reported in the literature on mass transfer in nano-fluids. The aim of this paper is to summarize the literature on mass transfer in nano-fluids stating the conflicts and possible reasons. Literature on mass transfer in nano-fluids has been reviewed in two sections. The first section concentrates on surveying mass diffusivity in nano-fluids while the second section focuses on convective mass transfer in nano-fluids. In each section, published articles, type of nano-fluids used, size and concentration range of nanoparticles, measurement methods, maximum observed enhancement, and suggested mass transport mechanisms are summarized. (authors)

Transfer Zymography.

Science.gov (United States)

Pan, Daniel; Wilson, Karl A; Tan-Wilson, Anna

2017-01-01

The technique described here, transfer zymography, was developed to overcome two limitations of conventional zymography. When proteolytic enzymes are resolved by nonreducing SDS-PAGE into a polyacrylamide gel with copolymerized protein substrate, the presence of the protein substrate can result in anomalous, often slower, migration of the protease and an estimated mass higher than its actual mass. A further drawback is that the presence of a high background of substrate protein interferes with proteomic analysis of the protease band by excision, tryptic digestion, and LC-MS/MS analysis. In transfer zymography, the proteolytic enzymes are resolved by conventional nonreducing SDS-PAGE, without protein substrate in the gel. The proteins in the resolving gel are then electrophoretically transferred to a receiving gel that contains the protein substrate, by a process similar to western blotting. The receiving gel is then processed in a manner similar to conventional zymography. SDS is removed by Triton X-100 and incubated in conditions suitable for the proteolytic activity. After protein staining, followed by destaining, bands representing regions with active protease are visualized as clear bands in a darkly stained background. For proteomic analysis, electrophoresis is carried out simultaneously on a second resolving gel, and the bands corresponding to the clear regions in the receiving gel after zymogram development are excised for proteomic analysis.

Green Wireless Power Transfer Networks

NARCIS (Netherlands)

Liu, Q.; Golinnski, M.; Pawelczak, P.; Warnier, M.

2016-01-01

wireless power transfer network (WPTN) aims to support devices with cable-less energy on-demand. Unfortunately, wireless power transfer itself-especially through radio frequency radiation rectification-is fairly inefficient due to decaying power with distance, antenna polarization, etc.

Delaminated Transfer of CVD Graphene

Science.gov (United States)

Clavijo, Alexis; Mao, Jinhai; Tilak, Nikhil; Altvater, Michael; Andrei, Eva

Single layer graphene is commonly synthesized by dissociation of a carbonaceous gas at high temperatures in the presence of a metallic catalyst in a process known as Chemical Vapor Deposition or CVD. Although it is possible to achieve high quality graphene by CVD, the standard transfer technique of etching away the metallic catalyst is wasteful and jeopardizes the quality of the graphene film by contamination from etchants. Thus, development of a clean transfer technique and preservation of the parent substrate remain prominent hurdles to overcome. In this study, we employ a copper pretreatment technique and optimized parameters for growth of high quality single layer graphene at atmospheric pressure. We address the transfer challenge by utilizing the adhesive properties between a polymer film and graphene to achieve etchant-free transfer of graphene films from a copper substrate. Based on this concept we developed a technique for dry delamination and transferring of graphene to hexagonal boron nitride substrates, which produced high quality graphene films while at the same time preserving the integrity of the copper catalyst for reuse. DOE-FG02-99ER45742, Ronald E. McNair Postbaccalaureate Achievement Program.

Transfer pricing and safe harbours

Directory of Open Access Journals (Sweden)

Veronika Solilová

2013-01-01

Full Text Available Transfer prices are significant for both taxpayers and tax administrations because they determine in large part taxable profits of associated enterprises in different tax jurisdictions. Moreover, in the context of taxation, transfer prices must be complied with the arm’s length principle. However, Multinational Enterprises have been faced daily by conflicting rules and approaches to applying the arm’s length principle, burdensome documentation requirements, inconsistent audit standards and unpredictable competent authority outcomes. Therefore, the Committee on Fiscal Affairs launched another project on the administrative aspects of transfer pricing in 2010. On 16 May 2013 as a partial solution of this project was approved by the OECD Council the Revised Section E on Safe Harbours in Chapter IV of the Transfer Pricing Guidelines for Multinational Enterprises and Tax Authorities. The paper is focused on significant changes of newly approved chapter IV of the Transfer Pricing Guidelines for Multinational Enterprises and Tax Authorities, further on analysis of practice in this area, on advantages and disadvantages of safe harbours for taxpayers and competent authorities with aim to suggest recommendations on use of safe harbours in the Czech Republic.

MRS transfer facility feasibility study

International Nuclear Information System (INIS)

Jowdy, A.K.; Smith, R.I.

1990-12-01

Under contract to the US Department of Energy, Parsons was requested to evaluate the feasibility of building a simple hot cell (waste handling) transfer facility at the Monitored Retrievable Storage (MRS) site to facilitate acceptance of spent fuel into the Federal Waste Management System starting in early 1998. The Transfer Facility was intended to provide a receiving and transfer to storage capability at a relatively low throughput rate (approximately 500 MTU/yr) and to provide the recovery capability needed on the site in the event of a transport or storage cask seal failure during a period of about two years while the larger Spent Fuel Handling Building (SFHB) was being completed. Although the original study basis postulated an incremental addition to the larger, previously considered MRS configurations, study results show that the Transfer Facility may be capable of receiving and storing spent fuel at annual rates of 3000 MTU/yr or more, making a larger fuel handling structure unnecessary. In addition, the study analyses showed that the Transfer Facility could be constructed and put into service in 15--17 months and would cost less than the previous configurations. 2 figs., 2 tabs

Plasma cholesteryl ester transfer protein mass and phospholipid transfer protein activity are associated with leptin in type 2 diabetes mellitus

NARCIS (Netherlands)

Dullaart, R. P. F.; de Vries, R.; Dallinga-Thie, G. M.; van Tol, A.; Sluiter, W. J.

Adipose tissue contributes to plasma levels of lipid transfer proteins and is also the major source of plasma adipokines. We hypothesized that plasma cholesteryl ester transfer protein (CETP) mass, phospholipid transfer protein (PLTP) activity and cholesteryl ester transfer (CET, a measure of CETP

Spontaneous charged lipid transfer between lipid vesicles.

Science.gov (United States)

Richens, Joanna L; Tyler, Arwen I I; Barriga, Hanna M G; Bramble, Jonathan P; Law, Robert V; Brooks, Nicholas J; Seddon, John M; Ces, Oscar; O'Shea, Paul

2017-10-03

An assay to study the spontaneous charged lipid transfer between lipid vesicles is described. A donor/acceptor vesicle system is employed, where neutrally charged acceptor vesicles are fluorescently labelled with the electrostatic membrane probe Fluoresceinphosphatidylethanolamine (FPE). Upon addition of charged donor vesicles, transfer of negatively charged lipid occurs, resulting in a fluorescently detectable change in the membrane potential of the acceptor vesicles. Using this approach we have studied the transfer properties of a range of lipids, varying both the headgroup and the chain length. At the low vesicle concentrations chosen, the transfer follows a first-order process where lipid monomers are transferred presumably through the aqueous solution phase from donor to acceptor vesicle. The rate of transfer decreases with increasing chain length which is consistent with energy models previously reported for lipid monomer vesicle interactions. Our assay improves on existing methods allowing the study of a range of unmodified lipids, continuous monitoring of transfer and simplified experimental procedures.

Symmetric charge transfer cross section of uranium

International Nuclear Information System (INIS)

Shibata, Takemasa; Ogura, Koichi

1995-03-01

Symmetric charge transfer cross section of uranium was calculated under consideration of reaction paths. In the charge transfer reaction a d 3/2 electron in the U atom transfers into the d-electron site of U + ( 4 I 9/2 ) ion. The J value of the U atom produced after the reaction is 6, 5, 4 or 3, at impact energy below several tens eV, only resonant charge transfer in which the product atom is ground state (J=6) takes place. Therefore, the cross section is very small (4-5 x 10 -15 cm 2 ) compared with that considered so far. In the energy range of 100-1000eV the cross section increases with the impact energy because near resonant charge transfer in which an s-electron in the U atom transfers into the d-electron site of U + ion. Charge transfer cross section between U + in the first excited state (289 cm -1 ) and U in the ground state was also obtained. (author)

Experimental Evidence on Transfer Pricing

Directory of Open Access Journals (Sweden)

Tran Quoc H.

2016-06-01

Full Text Available We use incentivized economics experiments to test both the point predictions and comparative static predictions of optimal transfer pricing models, comparing behavior under varying conditions, including wholly versus partially-owned subsidiaries and different tariff and tax rates. As predicted, we find that transfer prices are responsive to relative tax and tariff rates as well as ownership proportions. Additionally, we examine convergence and learning in this setting. While individuals do not choose optimal transfer prices, their choices converge to optimal levels with experience. This paper thus makes two important contributions. First, by comparing behavior with theoretical predictions it provides evidence of whether (and when individuals set transfer prices optimally. Second, by comparing behavior under conditions of full and partial ownership it provides evidence on the impact of policy interventions (like regulating ownership proportions by MNEs on tax revenues.

Transfer pricing principles in VAT Law

DEFF Research Database (Denmark)

Jensen, Dennis Ramsdahl

2011-01-01

The main part of the article is devoted to a critical analysis of the optional transfer pricing provisions in the EC VAT Directive in the light of the principle of fiscal neutrality. As an integrated part of this analysis, the VAT transfer pricing regime is considered in the light of the well......-known principles for transfer pricing in the area of income tax law, as set out in Art. 9 of the OECD Model Tax Convention. The last part of the article contains a brief discussion of to which extent it is desirable to harmonize the two tax systems´ transfer pricing rules....

Electron transfer to sulfides:

International Nuclear Information System (INIS)

Meneses, Ana Belen; Antonello, Sabrina; Arevalo, Maria Carmen; Maran, Flavio

2005-01-01

The problem of characterizing the steps associated with the dissociative reduction of sulfides has been addressed. The electrochemical reduction of diphenylmethyl para-methoxyphenyl sulfide in N,N-dimethylformamide, on both glassy carbon and mercury electrodes, was chosen as a test system. The electrode process involves the slow heterogeneous outer-sphere electron transfer to the sulfide, the fast cleavage of the C-S bond, the reduction of the ensuing carbon radical, and the self-protonation triggered by the generation of the strong base Ph 2 CH - . The latter reaction is rather slow, in agreement with the large intrinsic barriers characterizing proton transfers between CH-acids and carbon bases. The dissociative reduction was studied in the presence of an exogenous acid. The results, obtained by convolution analysis, point to a stepwise DET mechanism in which the ET step is accompanied by rather large reorganization energy. Similar results were obtained on both electrode materials. Analysis of the heterogeneous electron transfer and associated C-S bond cleavage indicate that the reduction of this and other sulfides lies between the stepwise dissociative electron transfers leading to the formation of stiff π* radical anions and those going through the intermediacy of loose σ* radical anions

Rail Access to Yucca Mountain: Critical Issues

International Nuclear Information System (INIS)

Halstead, R. J.; Dilger, F.; Moore, R. C.

2003-01-01

The proposed Yucca Mountain repository site currently lacks rail access. The nearest mainline railroad is almost 100 miles away. Absence of rail access could result in many thousands of truck shipments of spent nuclear fuel and high-level radioactive waste. Direct rail access to the repository could significantly reduce the number of truck shipments and total shipments. The U.S. Department of Energy (DOE) identified five potential rail access corridors, ranging in length from 98 miles to 323 miles, in the Final Environmental Impact Statement (FEIS) for Yucca Mountain. The FEIS also considers an alternative to rail spur construction, heavy-haul truck (HHT) delivery of rail casks from one of three potential intermodal transfer stations. The authors examine the feasibility and cost of the five rail corridors, and DOE's alternative proposal for HHT transport. The authors also address the potential for rail shipments through the Las Vegas metropolitan area

Energy-transfer properties and mechanisms:

International Nuclear Information System (INIS)

Barker, J.R.

1988-02-01

This project continues the research on vibrational energy transfer involving large molecules. The motivation of the research is to advance knowledge concerning molecular energy in the electronic ground state so that meaningful predictions can be made. The experimental program will use several techniques on several different molecules with the aim of eliminating experimental artifacts and gaining more insight into energy transfer processes. The theoretical effort will be directed toward assessing the validity of the Biased Random Walk theory and toward developing simpler models that adequately describe the energy transfer process. 6 figs

PLUGGING AND UNPLUGGING OF WASTE TRANSFER PIPELINES

International Nuclear Information System (INIS)

Ebadian, M.A.

1999-01-01

This project, which began in FY97, involves both the flow loop research on plugging and unplugging of waste transfer pipelines, and the large-scale industrial equipment test of plugging locating and unplugging technologies. In FY98, the related work was performed under the project name ''Mixing, Settling, and Pipe Unplugging of Waste Transfer Lines.'' The mixing, settling, and pipeline plugging and unplugging are critical to the design and maintenance of a waste transfer pipeline system, especially for the High-Level Waste (HLW) pipeline transfer. The major objective of this work is to recreate pipeline plugging conditions for equipment testing of plug locating and removal and to provide systematic operating data for modification of equipment design and enhancement of performance of waste transfer lines used at DOE sites. As the waste tank clean-out and decommissioning program becomes active at the DOE sites, there is an increasing potential that the waste slurry transfer lines will become plugged and unable to transport waste slurry from one tank to another or from the mixing tank to processing facilities. Transfer systems may potentially become plugged if the solids concentration of the material being transferred increases beyond the capability of the prime mover or if upstream mixing is inadequately performed. Plugging can occur due to the solids' settling in either the mixing tank, the pumping system, or the transfer lines. In order to enhance and optimize the slurry's removal and transfer, refined and reliable data on the mixing, sampling, and pipe unplugging systems must be obtained based on both laboratory-scale and simulated in-situ operating conditions

Resonance Energy Transfer Molecular Imaging Application in Biomedicine

Directory of Open Access Journals (Sweden)

NIE Da-hong1,2;TANG Gang-hua1,3

2016-11-01

Full Text Available Resonance energy transfer molecular imaging (RETI can markedly improve signal intensity and tissue penetrating capacity of optical imaging, and have huge potential application in the deep-tissue optical imaging in vivo. Resonance energy transfer (RET is an energy transition from the donor to an acceptor that is in close proximity, including non-radiative resonance energy transfer and radiative resonance energy transfer. RETI is an optical imaging technology that is based on RET. RETI mainly contains fluorescence resonance energy transfer imaging (FRETI, bioluminescence resonance energy transfer imaging (BRETI, chemiluminescence resonance energy transfer imaging (CRETI, and radiative resonance energy transfer imaging (RRETI. RETI is the hot field of molecular imaging research and has been widely used in the fields of biology and medicine. This review mainly focuses on RETI principle and application in biomedicine.

What Is Technology Transfer? | Poster

Science.gov (United States)

The NCI Technology Transfer Center (TTC) facilitates partnerships between NIH research laboratories and external partners. With a team of technology transfer specialists, NCI TTC guides interactions from discovery to patenting, as well as from collaboration and invention development to licensing.

Dry Transfer Systems for Used Nuclear Fuel

Energy Technology Data Exchange (ETDEWEB)

Brett W. Carlsen; Michaele BradyRaap

2012-05-01

The potential need for a dry transfer system (DTS) to enable retrieval of used nuclear fuel (UNF) for inspection or repackaging will increase as the duration and quantity of fuel in dry storage increases. This report explores the uses for a DTS, identifies associated general functional requirements, and reviews existing and proposed systems that currently perform dry fuel transfers. The focus of this paper is on the need for a DTS to enable transfer of bare fuel assemblies. Dry transfer systems for UNF canisters are currently available and in use for transferring loaded canisters between the drying station and storage and transportation casks.

Detection of proteins on blot transfer membranes.

Science.gov (United States)

Sasse, Joachim; Gallagher, Sean R

2003-11-01

In the basic and alternate protocols of this unit, proteins are stained after electroblotting from polyacrylamide gels to blot transfer membranes. If the samples of interest are electrophoresed in duplicate and transferred to a blot transfer membrane, half of the membrane can be stained to determine the efficiency of transfer to the membrane and the other half can be used for immunoblotting (i.e., western blotting). Detection limits of each staining method are given along with a list of compatible blot transfer membranes and gels. A support protocol describes a method for alkali treatment that enhances subsequent staining of bound proteins.

Benefit Transfer Studies: Myths, Pragmatism, and Idealism

Science.gov (United States)

Boyle, Kevin J.; Bergstrom, John C.

1992-03-01

Benefit transfer has been an ongoing, practical analysis for years in legal proceedings and government policy analyses where timely benefit estimates are critically dependent on the use of existing data. Most benefit transfer studies to date have been conducted behind closed doors and have not been open to scholarly review, and no systematic research agenda has been established to determine whether benefit transfer estimates are valid for public policy analyses. In this paper we propose a systematic, conceptual foundation for conducting benefit transfer studies, and suggest a research agenda to identify conditions under which valid benefit transfer estimates can be derived. We conclude, however, that this research agenda must be accompanied by improved conduct and reporting of original valuation studies before benefit transfer can become a widely used tool in public policy analyses.

An evaluation of analytical heat transfer area with various boiling heat transfer correlations in steam generator thermal sizing

International Nuclear Information System (INIS)

Jung, B. R.; Park, H. S.; Chung, D. M.; Baik, S. J.

1999-01-01

The computer program SAFE has been used to size and analyze the performance of a steam generator which has two types of heat transfer regions in Korean Standard Nuclear Power Plants (KSNP) and Korean Next Generation Reactor (KNGR) design. The SAFE code calculates the analytical boiling heat transfer area using the modified form of the saturated nucleate pool boiling correlation suggested by Rohsenow. The predicted heat transfer area in the boiling region is multiplied by a constant to obtain a final analytical heat transfer area. The inclusion of the multiplier in the analytical calculation has some disadvantage of loss of complete correlation by the governing heat transfer equation. Several comparative analyses have been performed quantitatively to evaluate the possibility of removing the multiplier in the analytical calculation in the SAFE code. The evaluation shows that the boiling correlation and multiplier used in predicting the boiling region heat transfer area can be replaced with other correlations predicting nearly the same heat transfer area. The removal of multiplier included in the analytical calculation will facilitate a direct use of a set of concerned analytical sizing values that can be exactly correlated by the governing heat transfer equation. In addition this will provide more reasonable basis for the steam generator thermal sizing calculation and enhance the code usability without loss of any validity of the current sizing procedure. (author)

CONFLICT OF INTERESTS IN TRANSFER PRICING

Directory of Open Access Journals (Sweden)

M. Osvald

2014-09-01

Full Text Available In the conditions of globalization all the companies try to find the effective ways of maximizing their profit. One of the instruments is the system of the transfer pricing that helps to optimize the costs and allocate effective the resources of the company. Transfer pricing has detrimental effect on the economy of countries, though the governments use the regulations to minimize this effect on their economy. In this case the conflict of interests appears. Paper deals with an analysis of the functions and reasons of the economic agents which use the transfer prices to demonstrate the conflict of interests in transfer pricing. The purpose of the study is the determination of the best ways to solve the conflict situations in the process of transfer pricing according to the economic interests of the agents: company and government and within the company: headquarters and subsidiaries. The main point of resolving the conflict between company and government is to make clear regulations of transfer pricing for enterprises and productive relations between company and government. The methods to resolve the conflict within the company are: clear guidelines, decentralization and motivation for stuff members.

Primary to comprehensive stroke center transfers: Appropriateness, not futility.

Science.gov (United States)

Goyal, Mayank; Menon, Bijoy K; Wilson, Alexis T; Almekhlafi, Mohammed A; McTaggart, Ryan; Jayaraman, Mahesh; Demchuk, Andrew M; Hill, Michael D

2018-01-01

Background and purpose Ischemic stroke patients must be transferred to comprehensive stroke centers for endovascular treatment, but this transfer can be interpreted post hoc as "futile" if patients do not ultimately undergo the procedure or have a poor outcome. We posit that transfer decisions must instead be evaluated in terms of appropriateness at the time of decision-making. Methods We propose a classification schema for Appropriateness of Transfer for Endovascular Thrombectomy based on patient, logistic, and center characteristics. Results The classification outline characteristics of patients that are 1. Appropriate for transfer for endovascular treatment; 2. Inappropriate for transfer; and 3. Appropriate for transfer for higher level of care. Conclusions Appropriate transfer decisions for endovascular treatment are significant for patient outcomes. A more nuanced understanding of transfer decision-making and a classification for such transfers can help minimize inappropriate transfers in acute stroke.

Technology transfer: The CANDU approach

International Nuclear Information System (INIS)

Hart, R.S.

1998-01-01

The many and diverse technologies necessary for the design, construction licensing and operation of a nuclear power plant can be efficiently assimilated by a recipient country through an effective technology transfer program supported by the firm long term commitment of both the recipient country organizations and the supplier. AECL's experience with nuclear related technology transfer spans four decades and includes the construction and operation of CANDU plants in five countries and four continents. A sixth country will be added to this list with the start of construction of two CANDU 6 plants in China in early 1997. This background provides the basis for addressing the key factors in the successful transfer of nuclear technology, providing insights into the lessons learned and introducing a framework for success. This paper provides an overview of AECL experience relative to the important factors influencing technology transfer, and reviews specific country experiences. (author)

Stability of the LHC transfer lines

CERN Document Server

Kain, V; Bartmann, W; Bracco, C; Goddard, B; Meddahi, M; Uythoven, J; Wenninger, J

2011-01-01

The LHC is filled from the SPS through two 3 km transfer lines. The injected beam parameters need to be well under control for luminosity performance, machine protection and operational efficiency. Small fractions of beam loss on the transfer line collimation system create showers which can trigger the sensitive LHC beam loss monitor system nearby and cause a beam abort during filling. The stability of the transfer line trajectory through the collimators is particularly critical in this respect. This paper will report on the transfer line trajectory stability during the proton run in 2011, correlations with injection losses, correction frequency and the most likely sources for the observed oscillations.

Heat transfer in two-phase flow of helium

International Nuclear Information System (INIS)

Subbotin, V.I.; Deev, V.I.; Solodovnikov, V.V.; Arkhipov, V.V.

1986-01-01

The results of experimental study of heat transfer in two-phase helium flow are presented. The effect of operating parameters (pressure, mass velocity, heat flux and quality) on boiling heat transfer intensity was investigated. A significant influence of boiling process prehistory on heat transfer coefficients was demonstrated. On the basis of experimental data obtained three typical regimes of flow boiling heat transfer were found. Analogy of heat transfer in flow boiling and pool boiling of helium and noncryogenic liquids was established. Correlations were developed which are in close agreement with available heat transfer data

Integrated Intermodal Passenger Transportation System

Science.gov (United States)

Klock, Ryan; Owens, David; Schwartz, Henry; Plencner, Robert

2012-01-01

Modern transportation consists of many unique modes of travel. Each of these modes and their respective industries has evolved independently over time, forming a largely incoherent and inefficient overall transportation system. Travelers today are forced to spend unnecessary time and efforts planning a trip through varying modes of travel each with their own scheduling, pricing, and services; causing many travelers to simply rely on their relatively inefficient and expensive personal automobile. This paper presents a demonstration program system to not only collect and format many different sources of trip planning information, but also combine these independent modes of travel in order to form optimal routes and itineraries of travel. The results of this system show a mean decrease in inter-city travel time of 10 percent and a 25 percent reduction in carbon dioxide emissions over personal automobiles. Additionally, a 55 percent reduction in carbon dioxide emissions is observed for intra-city travel. A conclusion is that current resources are available, if somewhat hidden, to drastically improve point to point transportation in terms of time spent traveling, the cost of travel, and the ecological impact of a trip. Finally, future concepts are considered which could dramatically improve the interoperability and efficiency of the transportation infrastructure.

Boiling heat transfer on horizontal tube bundles

International Nuclear Information System (INIS)

Anon.

1987-01-01

Nucleate boiling heat transfer characteristics for a tube in a bundle differ from that for a single tube in a pool and this difference is known as 'tube bundle effect.' There exist two bundle effects, positive and negative. The positive bundle effect enhances heat transfer due to convective flow induced by rising bubbles generated from the lower tubes, while the negative bundle effect deteriorates heat transfer due to vapor blanketing caused by accumulation of bubbles. Staggered tube bundles tested and found that the upper tubes in bundles have higher heat transfer coefficients than the lower tubes. The effects of various parameters such as pressure, tube geometry and oil contamination on heat transfer have been examined. Some workers attempted to clarify the mechanism of occurrence of 'bundle effect' by testing tube arrangements of small scale. All reported only enhancement in heat transfer but results showed the symptom of heat transfer deterioration at higher heat fluxes. As mentioned above, it has not been clarified so far even whether the 'tube bundle effect' should serve as enhancement or deterioration of heat transfer in nucleate boiling. In this study, experiments are performed in detail by using bundles of small scale, and effects of heat flux distribution, pressure and tube location are clarified. Furthermore, some consideration on the mechanisms of occurrence of 'tube bundle effect' is made and a method for prediction of heat transfer rate is proposed

Emergency transfer tube closure and process for sealing transfer tube under emergency conditions

International Nuclear Information System (INIS)

Hardin, R.T. Jr.; Marshall, J.R.

1987-01-01

In a nuclear fuel reactor well that includes a transfer tube projecting outwardly from wall thereof, the transfer tube is described having a first closure assembly. The transfer tube has a circumferential flange extending outwardly laterally therefrom, an emergency transfer tube closure therefor comprising; a pair of elongated, vertically-extending U-shaped guides, one U-shaped guide disposed laterally on each side of the transfer tube, each of the U-shaped guides comprising a base and laterally extending flanges thereon, the U-shaped guides having their open ends facing each other, a closure plate, having a surface facing the circumferential flange greater in area than the area circumscribed by the outer circumference of the circumferential flange, vertically disposed the U-shaped guides, the closure plate normally being disposed in a vertical plane just slightly in front of the vertical plane of the circumferential flange, two pairs of rollers, one pair of which is rotatably mounted on each side of the closure plate adjacent the U-shaped guides, riding on the inner portion of each of the flanges of each of the U-shaped guides. Each of the U-shaped guides is provided with a pair of spatially disposed openings on a flange thereof adjacent the wall of the nuclear fuel reactor well, each of the pairs of openings being disposed on each of the U-shaped guides a distance equal to the distance between the center lines of the corresponding pair of rollers riding within the U-shaped guides, each of the openings being sufficiently large to receive a corresponding roller of the pairs of rollers in the U-shaped guides. The openings is shaped on the flanges of the U-shaped guides so that when the pairs of rollers are disposed therein, the face of the closure plate will be in sealing engagement with the circumferential flange of the transfer tube

Simple Ion Transfer at Liquid|Liquid Interfaces

Directory of Open Access Journals (Sweden)

L. J. Sanchez Vallejo

2012-01-01

Full Text Available The main aspects related to the charge transfer reactions occurring at the interface between two immiscible electrolyte solutions (ITIES are described. The particular topics to be discussed involve simple ion transfer. Focus is given on theoretical approaches, numerical simulations, and experimental methodologies. Concerning the theoretical procedures, different computational simulations related to simple ion transfer are reviewed. The main conclusions drawn from the most accepted models are described and analyzed in regard to their relevance for explaining different aspects of ion transfer. We describe numerical simulations implementing different approaches for solving the differential equations associated with the mass transport and charge transfer. These numerical simulations are correlated with selected experimental results; their usefulness in designing new experiments is summarized. Finally, many practical applications can be envisaged regarding the determination of physicochemical properties, electroanalysis, drug lipophilicity, and phase-transfer catalysis.

Proton transfer events in GFP

NARCIS (Netherlands)

Di Donato, M.; van Wilderen, L.J.G.W.; van Stokkum, I.H.M.; Cohen Stuart, T.A.; Kennis, J.T.M.; Hellingwerf, K.J.; van Grondelle, R.; Groot, M.L.

2011-01-01

Proton transfer is one of the most important elementary processes in biology. Green fluorescent protein (GFP) serves as an important model system to elucidate the mechanistic details of this reaction, because in GFP proton transfer can be induced by light absorption. Illumination initiates proton

Handbook of heat and mass transfer. Volume 2

International Nuclear Information System (INIS)

Cheremisinoff, N.P.

1986-01-01

This two-volume series, the work of more than 100 contributors, presents advanced topics in industrial heat and mass transfer operations and reactor design technology. Volume 2 emphasizes mass transfer and reactor design. Some of the contents discussed are: MASS TRANSFER PRINCIPLES - Effect of turbulence promoters on mass transfer. Mass transfer principles with homogeneous and heterogeneous reactions. Convective diffusion with reactions in a tube. Transient mass transfer onto small particles and drops. Modeling heat and mass transport in falling liquid films. Heat and mass transfer in film absorption. Multicomponent mass transfer: theory and applications. Diffusion limitation for reaction in porous catalysts. Kinetics and mechanisms of catalytic deactivation. DISTILLATION AND EXTRACTION - Generalized equations of state for process design. Mixture boiling. Estimating vapor pressure from normal boiling points of hydrocarbons. Estimating liquid and vapor molar fractions in distillation columns. Principles of multicomponent distillation. Generalized design methods for multicomponent distillation. Interfacial films in inorganic substances extraction. Liquid-liquid extraction in suspended slugs. MULTIPHASE REACTOR SYSTEMS - Reaction and mass transport in two-phase reactors. Mass transfer and kinetics in three-phase reactors. Estimating liquid film mass transfer coefficients in randomly packed columns. Designing packed tower wet scrubbers - emphasis on nitrogen oxides. Gas absorption in aerated mixers. Axial dispersion and heat transfer in gas-liquid bubble columns. Operation and design of trickle-bed reactors

TRANSFER RESERVOIR AS A RAINWATER DRAINAGE SYSTEM

Directory of Open Access Journals (Sweden)

Robert Malmur

2016-06-01

Full Text Available Intensive rainfalls and snow melting often cause floods in protected areas and overflow the existing sewage systems. Such cases are particularly burdensome for the inhabitants and cause considerable physical losses. One of the possible constructional solutions to ensure the effective outflow of stormwater are transfer reservoirs located between the draining system and a receiver set discussed in this paper. If gravity outflow of sewage is impossible, the initial part of sewage volume is accumulated in the transfer reservoir and then it is transferred into the water receiver set. However, gravity discharge of sewage to the water receiver set occurs through transfer chambers in the transfer reservoir.

Nucleon transfer between heavy nuclei

International Nuclear Information System (INIS)

Von Oertzen, W.

1984-02-01

Nucleon transfer reactions between heavy nuclei are characterized by the classical behaviour of the scattering orbits. Thus semiclassical concepts are well suited for the description of these reactions. In the present contribution the characteristics of single and multinucleon transfer reactions at energies below and above the Coulomb barrier are shown for systems like Sn+Sn, Xe+U and Ni+Pb. The role of the pairing interaction in the transfer of nucleon pairs is illustrated. For strong transitions the coupling of channels and the absorption into more complicated channels is taken into account in a coupled channels calculation

Knowledge transfer and expatriation in multinational corporations

DEFF Research Database (Denmark)

Minbaeva, Dana; Michailova, Snejina

2004-01-01

Research on multinational corporation (MNC) knowledge transfer has argued continuously for the behavior of knowledge senders to be a determinant of knowledge transfer. Although the importance of disseminative capacity regarding knowledge transfer has been illustrated in numerous conceptual studies...

Gas mass transfer for stratified flows

International Nuclear Information System (INIS)

Duffey, R.B.; Hughes, E.D.

1995-01-01

We analyzed gas absorption and release in water bodies using existing surface renewal theory. We show a new relation between turbulent momentum and mass transfer from gas to water, including the effects of waves and wave roughness, by evaluating the equilibrium integral turbulent dissipation due to energy transfer to the water from the wind. Using Kolmogoroff turbulence arguments the gas transfer velocity, or mass transfer coefficient, is then naturally and straightforwardly obtained as a non-linear function of the wind speed drag coefficient and the square root of the molecular diffusion coefficient. In dimensionless form, the theory predicts the turbulent Sherwood number to be Sh t = (2/√π)Sc 1/2 , where Sh t is based on an integral dissipation length scale in the air. The theory confirms the observed nonlinear variation of the mass transfer coefficient as a function of the wind speed; gives the correct transition with turbulence-centered models for smooth surfaces at low speeds; and predicts experimental data from both laboratory and environmental measurements within the data scatter. The differences between the available laboratory and field data measurements are due to the large differences in the drag coefficient between wind tunnels and oceans. The results also imply that the effect of direct aeration due to bubble entrainment at wave breaking is no more than a 20% increase in the mass transfer for the highest speeds. The theory has importance to mass transfer in both the geo-physical and chemical engineering literature

77 FR 6310 - Electronic Fund Transfers (Regulation E)

Science.gov (United States)

2012-02-07

... business'' in the definition of ``remittance transfer provider.'' This definition determines whether a... remittance transfers in the ``normal course of its business'' from the definition of ``remittance transfer... ``normal course of business'' for purposes of the definition of ``remittance transfer provider.'' Second...

Differences in technology transfer between science-based and development-based industries : transfer mechanisms and barriers

NARCIS (Netherlands)

Gilsing, V.A.; Bekkers, R.N.A.; Bodas Freitas, I.M.; Steen, van der M.

2011-01-01

Although several studies in the wide body of literature on technology transfer have hinted at differences across industries, this still remains an understudied issue. Our study addresses this topic and considers to what degree technology transfer processes differ across different industrial sectors.

Technology transfer

International Nuclear Information System (INIS)

1998-01-01

On the base of technological opportunities and of the environmental target of the various sectors of energy system this paper intend to conjugate the opportunity/objective with economic and social development through technology transfer and information dissemination [it

A comparison of medium voltage static transfer switches and medium voltage mechanical transfer switches

Energy Technology Data Exchange (ETDEWEB)

Risko, W. P.

2002-07-01

Medium voltage static transfer switches (MVSTS) and medium voltage mechanical transfer switches (MVATS) perform a common function, namely selecting between two independent power sources to provide uninterrupted power to the loads. Although the functions are the same the method of performing that function is different and this method impacts the sources and connected load. This article describes the two methods of transfer -- mechanical and static -- their advantages and disadvantages, and their preferred applications. The MVSTS can be incorporated into many applications; it can work in conjunction with backup sources such as generators; and can replace generators as a low cost solution. The reliability of the MVSTS is very high; it also outperforms the MVATS with regard to transfer speed, and can react to anomalies in the same sub-cycle time frame. Because the design of the MVSTS is modular, it can be engineered and designed to fit into existing and future systems and applications, and can be used with different switchgear variations and protection arrangements. For example, load isolation and protection breakers can be added to the switchgear to provide flexibility and isolation.

Transfer mellem uddannelse og arbejde

DEFF Research Database (Denmark)

Wahlgren, Bjarne

Rapporten sammenfatter eksisterende forskning om faktorer, der bidrager til transfer, altså faktorer som bidrager til, at det, vi lærer i undervisningen, efterfølgende anvendes i en arbejdssituation. Forskningsoversigten præsenterer emririsk funderede resultater om, hvad vi ved om transfer. Den t...

Supervised Transfer Sparse Coding

KAUST Repository

Al-Shedivat, Maruan

2014-07-27

A combination of the sparse coding and transfer learn- ing techniques was shown to be accurate and robust in classification tasks where training and testing objects have a shared feature space but are sampled from differ- ent underlying distributions, i.e., belong to different do- mains. The key assumption in such case is that in spite of the domain disparity, samples from different domains share some common hidden factors. Previous methods often assumed that all the objects in the target domain are unlabeled, and thus the training set solely comprised objects from the source domain. However, in real world applications, the target domain often has some labeled objects, or one can always manually label a small num- ber of them. In this paper, we explore such possibil- ity and show how a small number of labeled data in the target domain can significantly leverage classifica- tion accuracy of the state-of-the-art transfer sparse cod- ing methods. We further propose a unified framework named supervised transfer sparse coding (STSC) which simultaneously optimizes sparse representation, domain transfer and classification. Experimental results on three applications demonstrate that a little manual labeling and then learning the model in a supervised fashion can significantly improve classification accuracy.

Tunable heat transfer with smart nanofluids.

Science.gov (United States)

Bernardin, Michele; Comitani, Federico; Vailati, Alberto

2012-06-01

Strongly thermophilic nanofluids are able to transfer either small or large quantities of heat when subjected to a stable temperature difference. We investigate the bistability diagram of the heat transferred by this class of nanofluids. We show that bistability can be exploited to obtain a controlled switching between a conductive and a convective regime of heat transfer, so as to achieve a controlled modulation of the heat flux.

Gene Transfers Between Distantly Related Organisms

Science.gov (United States)

Doolittle, Russell F.

2003-01-01

With the completion of numerous microbial genome sequences, reports of individual gene transfers between distantly related prokaryotes have become commonplace. On the other hand, transfers between prokaryotes and eukaryotes still excite the imagination. Many of these claims may be premature, but some are certainly valid. In this chapter, the kinds of supporting data needed to propose transfers between distantly related organisms and cite some interesting examples are considered.

Transfer your ideas to society!

CERN Multimedia

CERN Bulletin

2010-01-01

Science and technology labs are the ideal places for developing innovative solutions. However, inventors sometimes don’t realize that their ideas can find an application in industry, which can in turn have a technical and economic impact on society. Some researchers may think that disclosing an invention is a time-consuming process which is worth doing only in very special cases. But one thing is certain: it is always worth informing the Knowledge and Technology Transfer group, as they will give you the correct advice and support. Don’t be afraid of the paperwork… it can be highly rewarding!   Why should researchers at CERN bother to disclose their inventions to the Knowledge and Technology Transfer Group first? “Because when inventors do so, a process to transfer the technology to industry is set in motion” explains Henning Huuse, Patent Portfolio Manager in the KTT Group. To facilitate this transfer, patent protection can be a useful tool. &...

[Nuclear transfer and therapeutic cloning].

Science.gov (United States)

Xu, Xiao-Ming; Lei, An-Min; Hua, Jin-Lian; Dou, Zhong-Ying

2005-03-01

Nuclear transfer and therapeutic cloning have widespread and attractive prospects in animal agriculture and biomedical applications. We reviewed that the quality of oocytes and nuclear reprogramming of somatic donor cells were the main reasons of the common abnormalities in cloned animals and the low efficiency of cloning and showed the problems and outlets in therapeutic cloning, such as some basic problems in nuclear transfer affected clinical applications of therapeutic cloning. Study on isolation and culture of nuclear transfer embryonic stem (ntES) cells and specific differentiation of ntES cells into important functional cells should be emphasized and could enhance the efficiency. Adult stem cells could help to cure some great diseases, but could not replace therapeutic cloning. Ethics also impeded the development of therapeutic cloning. It is necessary to improve many techniques and reinforce the research of some basic theories, then somatic nuclear transfer and therapeutic cloning may apply to agriculture reproduction and benefit to human life better.

Thermal radiation heat transfer

CERN Document Server

Howell, John R; Mengüç, M Pinar

2011-01-01

Providing a comprehensive overview of the radiative behavior and properties of materials, the fifth edition of this classic textbook describes the physics of radiative heat transfer, development of relevant analysis methods, and associated mathematical and numerical techniques. Retaining the salient features and fundamental coverage that have made it popular, Thermal Radiation Heat Transfer, Fifth Edition has been carefully streamlined to omit superfluous material, yet enhanced to update information with extensive references. Includes four new chapters on Inverse Methods, Electromagnetic Theory, Scattering and Absorption by Particles, and Near-Field Radiative Transfer Keeping pace with significant developments, this book begins by addressing the radiative properties of blackbody and opaque materials, and how they are predicted using electromagnetic theory and obtained through measurements. It discusses radiative exchange in enclosures without any radiating medium between the surfaces-and where heat conduction...

Diffusion and mass transfer

CERN Document Server

Vrentas, James S

2013-01-01

The book first covers the five elements necessary to formulate and solve mass transfer problems, that is, conservation laws and field equations, boundary conditions, constitutive equations, parameters in constitutive equations, and mathematical methods that can be used to solve the partial differential equations commonly encountered in mass transfer problems. Jump balances, Green’s function solution methods, and the free-volume theory for the prediction of self-diffusion coefficients for polymer–solvent systems are among the topics covered. The authors then use those elements to analyze a wide variety of mass transfer problems, including bubble dissolution, polymer sorption and desorption, dispersion, impurity migration in plastic containers, and utilization of polymers in drug delivery. The text offers detailed solutions, along with some theoretical aspects, for numerous processes including viscoelastic diffusion, moving boundary problems, diffusion and reaction, membrane transport, wave behavior, sedime...

Technology transfer - north/south

Energy Technology Data Exchange (ETDEWEB)

Ercan, Y [Gazi University, Ankara (Turkey). Faculty of Engineering and Architecture

1991-01-01

Technology transfer is needed to the developing countries in the fields of fuel, combustion equipment, and operations to maximise combustion efficiency and minimise the harmful emissions. Channels of technology transfer available include: direct foreign investment, joint ventures, patent and licence purchases, industrial co-operation and technical aid, importation of technical goods, and turn-key projects. Dependency on totally imported technology and equipment both in boilers and flue gas treatment systems, however, results in high investment costs and may limit extensive use of power plants based on coal. If technologies to improve the efficiencies and emission behaviour of coal utilizing facilities are transferred to developing countries, a business scheme mutually beneficial both to the developing countries and the coal producing countries can be reached, which will boost the industrialization of the developing countries. 11 refs., 3 figs., 1 tab.

ICAT and the NASA technology transfer process

Science.gov (United States)

Rifkin, Noah; Tencate, Hans; Watkins, Alison

1993-01-01

This paper will address issues related to NASA's technology transfer process and will cite the example of using ICAT technologies in educational tools. The obstacles to effective technology transfer will be highlighted, viewing the difficulties in achieving successful transfers of ICAT technologies.

Technology transfer and localization: A Framatome perspective

International Nuclear Information System (INIS)

Preneuf, R. de

2000-01-01

Localization and technology transfer have been important factors influencing the decision-making process in countries embarking on a nuclear power programme. It seems natural that relationships between donors and recipients of technology, beginning with sub-contracting, should evolve towards technology transfers and cooperation on an equal footing. France was both a receiver and a donor of technology transfer in the area of nuclear power. This paper describes the French experience in technology transfer and the lesson learned therefrom. (author)

Technology Transfer: Marketing Tomorrow's Technology

Science.gov (United States)

Tcheng, Erene

1995-01-01

The globalization of the economy and the end of the Cold War have triggered many changes in the traditional practices of U.S. industry. To effectively apply the resources available to the United States, the federal government has firmly advocated a policy of technology transfer between private industry and government labs, in this case the National Aeronautics and Space Administration (NASA). NASA Administrator Daniel Goldin is a strong proponent of this policy and has organized technology transfer or commercialization programs at each of the NASA field centers. Here at Langley Research Center, the Technology Applications Group (TAG) is responsible for facilitating the transfer of Langley developed research and technology to U.S. industry. Entering the program, I had many objectives for my summer research with TAG. Certainly, I wanted to gain a more thorough understanding of the concept of technology transfer and Langley's implementation of a system to promote it to both the Langley community and the community at large. Also, I hoped to become more familiar with Langley's research capabilities and technology inventory available to the public. More specifically, I wanted to learn about the technology transfer process at Langley. Because my mentor is a member of Materials and Manufacturing marketing sector of the Technology Transfer Team, another overriding objective for my research was to take advantage of his work and experience in materials research to learn about the Advanced Materials Research agency wide and help market these developments to private industry. Through the various projects I have been assigned to work on in TAG, I have successfully satisfied the majority of these objectives. Work on the Problem Statement Process for TAG as well as the development of the Advanced Materials Research Brochure have provided me with the opportunity to learn about the technology transfer process from the outside looking in and the inside looking out. Because TAG covers

Transfer of heat to fluidized-solids beds

Energy Technology Data Exchange (ETDEWEB)

1952-10-16

The improvement in the method described and claimed in patent application 14,363/47 (136,186) for supplying heat to a dense turbulent mass of solid fluidized by a gas flowing upwardly therethrough and subjected to a high temperature in a treating zone, by heat transfer through heat-transfer surfaces of heat-transfer elements in contact with the said turbulent mass of finely divided solid and heated by means of a fluid heating medium, including burning fuels comprising contacting the said heat-transfer surfaces with a fuel and a combustion supporting gas under such conditions that the combustion of the fuel is localized in the heat-transfer element near the point of entry of the fuel and combustion-supporting gas and a substantial temperature gradient is maintained along the path of said fuel combustion-supporting gas and combustion products through the said heat-transfer element.

Heat and mass transfer in particulate suspensions

CERN Document Server

Michaelides, Efstathios E (Stathis)

2013-01-01

Heat and Mass Transfer in Particulate Suspensions is a critical review of the subject of heat and mass transfer related to particulate Suspensions, which include both fluid-particles and fluid-droplet Suspensions. Fundamentals, recent advances and industrial applications are examined. The subject of particulate heat and mass transfer is currently driven by two significant applications: energy transformations –primarily combustion – and heat transfer equipment. The first includes particle and droplet combustion processes in engineering Suspensions as diverse as the Fluidized Bed Reactors (FBR’s) and Internal Combustion Engines (ICE’s). On the heat transfer side, cooling with nanofluids, which include nanoparticles, has attracted a great deal of attention in the last decade both from the fundamental and the applied side and has produced several scientific publications. A monograph that combines the fundamentals of heat transfer with particulates as well as the modern applications of the subject would be...

Vacuum Large Current Parallel Transfer Numerical Analysis

Directory of Open Access Journals (Sweden)

Enyuan Dong

2014-01-01

Full Text Available The stable operation and reliable breaking of large generator current are a difficult problem in power system. It can be solved successfully by the parallel interrupters and proper timing sequence with phase-control technology, in which the strategy of breaker’s control is decided by the time of both the first-opening phase and second-opening phase. The precise transfer current’s model can provide the proper timing sequence to break the generator circuit breaker. By analysis of the transfer current’s experiments and data, the real vacuum arc resistance and precise correctional model in the large transfer current’s process are obtained in this paper. The transfer time calculated by the correctional model of transfer current is very close to the actual transfer time. It can provide guidance for planning proper timing sequence and breaking the vacuum generator circuit breaker with the parallel interrupters.

Transfer Pricing in the European Union

Directory of Open Access Journals (Sweden)

Gheorghe MATEI

2011-04-01

Full Text Available The transfer pricing mechanism is a tool commonly used to transfer the tax base from countries with high taxation in countries with low taxation. In the European Union, this financial operations generate significant tax revenue losses. In an attempt to limit the handling of corporate tax systems, many public authorities have introduced regulations on transfer pricing, but the effectiveness of these rules has proved limited, and they contributed to the increasing complexity of tax laws and to the appearance of additional costs for companies. A solution to the solving of the transfer pricing problem in the European Union is represented by the introduction of the common consolidated corporate tax base.

Radionuclide transfer to animal products: revised recommended transfer coefficient values

International Nuclear Information System (INIS)

Howard, B.J.; Beresford, N.A.; Barnett, C.L.; Fesenko, S.

2009-01-01

A compilation has been undertaken of data which can be used to derive animal product transfer coefficients for radionuclides, including an extensive review of Russian language information. The resultant database has been used to provide recommended transfer coefficient values for a range of radionuclides to (i) cow, sheep and goat milk, (ii) meat (muscle) of cattle, sheep, goats, pigs and poultry and (iii) eggs. The values are used in a new IAEA handbook on transfer parameters which replaces that referred to as 'TRS 364'. The paper outlines the approaches and procedures used to identify and collate data, and assumptions used. There are notable differences between the TRS 364 'expected' values and the recommended values in the revised Handbook from the new database. Of the recommended values, three milk values are at least an order of magnitude higher than the TRS 364 values (Cr, Pu (cow) Pu (sheep)) and one milk value is lower (Ni (cow)). For meat, four values (Am, Cd, Sb (beef) I (pork)) are at least an order of magnitude higher than the TRS 364 values and eight values are at least an order of magnitude lower (Ru, Pu (beef), Ru, Sr, Zn (sheep), Ru, Sr (pork), Mn (poultry)). Many data gaps remain

Radionuclide transfer to animal products: revised recommended transfer coefficient values

Energy Technology Data Exchange (ETDEWEB)

Howard, B.J. [Centre for Ecology and Hydrology, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster LAI 4AP (United Kingdom)], E-mail: bjho@ceh.ac.uk; Beresford, N.A.; Barnett, C.L. [Centre for Ecology and Hydrology, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster LAI 4AP (United Kingdom); Fesenko, S. [International Atomic Energy Agency, 1400 Vienna (Austria)

2009-03-15

A compilation has been undertaken of data which can be used to derive animal product transfer coefficients for radionuclides, including an extensive review of Russian language information. The resultant database has been used to provide recommended transfer coefficient values for a range of radionuclides to (i) cow, sheep and goat milk, (ii) meat (muscle) of cattle, sheep, goats, pigs and poultry and (iii) eggs. The values are used in a new IAEA handbook on transfer parameters which replaces that referred to as 'TRS 364'. The paper outlines the approaches and procedures used to identify and collate data, and assumptions used. There are notable differences between the TRS 364 'expected' values and the recommended values in the revised Handbook from the new database. Of the recommended values, three milk values are at least an order of magnitude higher than the TRS 364 values (Cr, Pu (cow) Pu (sheep)) and one milk value is lower (Ni (cow)). For meat, four values (Am, Cd, Sb (beef) I (pork)) are at least an order of magnitude higher than the TRS 364 values and eight values are at least an order of magnitude lower (Ru, Pu (beef), Ru, Sr, Zn (sheep), Ru, Sr (pork), Mn (poultry)). Many data gaps remain.

An assessment of RELAP5 MOD3.1.1 condensation heat transfer modeling with GIRAFFE heat transfer tests

International Nuclear Information System (INIS)

Boyer, B.D.; Parlatan, Y.; Slovik, G.C.; Rohatgi, U.S.

1995-01-01

RELAP5 MOD3.1.1 is being used to simulate Loss of Coolant Accidents (LOCA) for the Simplified Boiling Water Reactor (SBWR) being proposed by General Electric (GE). One of the major components associated with the SBWR is the Passive Containment Cooling System (PCCS) which provides the long-term heat sink to reject decay heat. The RELAP5 MOD3.1.1 code is being assessed for its ability to represent accurately the PCCS. Data from the Phase 1, Step 1 Heat Transfer Tests performed at Toshiba's Gravity-Driven Integral Full-Height Test for Passive Heat Removal (GIRAFFE) facility will be used for assessing the ability of RELAP5 to model condensation in the presence of noncondensables. The RELAP5 MOD3.1.1 condensation model uses the University of California at Berkeley (UCB) correlation developed by Vierow and Schrock. The RELAP5 code uses this heat transfer coefficient with the gas velocity effect multiplier being limited to 2. This heat transfer option was used to analyze the condensation heat transfer in the GIRAFFE PCCS heat exchanger tubes in the Phase 1, Step 1 Heat Transfer Tests which were at a pressure of 3 bar and had a range of nitrogen partial pressure fractions from 0.0 to 0.10. The results of a set of RELAP5 calculations al these conditions were compared with the GIRAFFE data. The effects of PCCS cell nodings on the heat transfer process were also studied. The UCB correlation, as implemented in RELAP5, predicted the heat transfer to ±5% of the data with a three-node model. The three-node model has a large cell in the entrance region which smeared out the entrance effects on the heat transfer, which tend to overpredict the condensation. Hence, the UCB correlation predicts condensation heat transfer in the presence of noncondensable gases with only a coarse mesh. The cell length term in the condensation heat transfer correlation implemented in the code must be removed to allow for accurate calculations with smaller cell sizes

A Practical Model for Inbound Container Distribution Organization in Rail-Water Transhipping Terminal

Directory of Open Access Journals (Sweden)

Jiahao Zhao

2018-01-01

Full Text Available Rail-water transportation is a crucial component of intermodal transportation system. Effective operation of rail-water intermodal transportation requires not only railway network and advanced handling equipment, but also scientific and reasonable transportation organization. In this paper, we first briefly introduced the coordination area and related concepts. Then an inbound container distribution organization model (ICDOM was established taking into account many factors such as transhipping capacity, network capacity, and importance of containers, in order to minimize the total container-hours in the coordination area, which reflects the efficiency of inbound container distribution organization. Additionally, a genetic algorithm (GA was developed and the optimization results were evaluated, which showed that both of the model and the algorithm were effective.

Advances in heat transfer

CERN Document Server

Hartnett, James P; Cho, Young I; Greene, George A

2001-01-01

Heat transfer is the exchange of heat energy between a system and its surrounding environment, which results from a temperature difference and takes place by means of a process of thermal conduction, mechanical convection, or electromagnetic radiation. Advances in Heat Transfer is designed to fill the information gap between regularly scheduled journals and university-level textbooks by providing in-depth review articles over a broader scope than is allowable in either journals or texts.

Accelerating Multiagent Reinforcement Learning by Equilibrium Transfer.

Science.gov (United States)

Hu, Yujing; Gao, Yang; An, Bo

2015-07-01

An important approach in multiagent reinforcement learning (MARL) is equilibrium-based MARL, which adopts equilibrium solution concepts in game theory and requires agents to play equilibrium strategies at each state. However, most existing equilibrium-based MARL algorithms cannot scale due to a large number of computationally expensive equilibrium computations (e.g., computing Nash equilibria is PPAD-hard) during learning. For the first time, this paper finds that during the learning process of equilibrium-based MARL, the one-shot games corresponding to each state's successive visits often have the same or similar equilibria (for some states more than 90% of games corresponding to successive visits have similar equilibria). Inspired by this observation, this paper proposes to use equilibrium transfer to accelerate equilibrium-based MARL. The key idea of equilibrium transfer is to reuse previously computed equilibria when each agent has a small incentive to deviate. By introducing transfer loss and transfer condition, a novel framework called equilibrium transfer-based MARL is proposed. We prove that although equilibrium transfer brings transfer loss, equilibrium-based MARL algorithms can still converge to an equilibrium policy under certain assumptions. Experimental results in widely used benchmarks (e.g., grid world game, soccer game, and wall game) show that the proposed framework: 1) not only significantly accelerates equilibrium-based MARL (up to 96.7% reduction in learning time), but also achieves higher average rewards than algorithms without equilibrium transfer and 2) scales significantly better than algorithms without equilibrium transfer when the state/action space grows and the number of agents increases.

On the heat transfer correlation for membrane distillation

International Nuclear Information System (INIS)

Wang, Chi-Chuan

2011-01-01

Research highlights: → Heat transfer coefficients applicable for membrane distillation. → Data reduction for heat transfer coefficient for membrane distillation method. → Uncertainty of permeate side due to large magnitude of membrane resistance. → Increase accuracy of heat transfer coefficient by modified Wilson plot technique. -- Abstract: The present study examines the heat transfer coefficients applicable for membrane distillation. In the available literatures, researchers often adopt some existing correlations and claim the suitability of these correlations to their test data or models. Unfortunately this approach is quite limited and questionable. This is subject to the influences of boundary conditions, geometrical configurations, entry flow conditions, as well as some influences from spacer or support. The simple way is to obtain the heat transfer coefficients from experimentation. However there is no direct experimental data for heat transfer coefficients being reported directly from the measurements. The main reasons are from the uncertainty of permeate side and of the comparatively large magnitude of membrane resistance. Additional minor influence is the effect of mass transfer on the heat transfer performance. In practice, the mass transfer effect is negligible provided the feed side temperature is low. To increase the accuracy of the measured feed side heat transfer coefficient, it is proposed in this study to exploit a modified Wilson plot technique. Through this approach, one can eliminate the uncertainty from permeate side and reduce the uncertainty in membrane to obtain a more reliable heat transfer coefficients at feed side from the experimentation.

Transference in the nurse-patient relationship.

Science.gov (United States)

Evans, A M

2007-04-01

The therapeutic relationship has been considered foundational to psychiatric nursing practice since at least the mid-20th century. However, this does not, in itself, guarantee either its continuity or relevance to current practice. Concepts such as the therapeutic relationship require sustained attention, both in theory and in practice, to illustrate ongoing relevance to the discipline. This paper addresses the therapeutic relationship in psychiatric nursing via aspects of psychoanalytic theory, particularly the notion of transference, as theorized by both Freud and Lacan. Two case fragments provide practice material, through which transference in the nurse-patient relationship is explored. The nurse, in the context of his/her relationship with the patient, a sick stranger, offers both a listening and the potential development of transference. This transference can be experienced, in part, as a form of attachment to the nurse, one that is not regarded pejoratively as dependency. There is the potential, within the nurse-patient relationship, for a psychical holding to develop, one from within which both the patient can speak and transference might arise. It is argued that listening to the patient has the potential to assist the patient and, with the development of transference, can provide the context for important work.

31 CFR 585.305 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 585.305 Section 585.305 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... agent, trustee, or fiduciary; the creation or transfer of any lien; the issuance, docketing, filing, or...

31 CFR 586.316 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 586.316 Section 586.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN...; the appointment of any agent, trustee, or fiduciary; the creation or transfer of any lien; the...

31 CFR 515.310 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 515.310 Section 515.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN..., or other fiduciary; the creation or transfer of any lien; the issuance, docketing, filing, or the...

31 CFR 587.309 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 587.309 Section 587.309 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN...; the appointment of any agent, trustee, or fiduciary; the creation or transfer of any lien; the...

31 CFR 500.310 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 500.310 Section 500.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN..., or other fiduciary; the creation or transfer of any lien; the issuance, docketing, filing, or the...

Federal Technology Transfer Act Success Stories

Science.gov (United States)

Successful Federal Technology Transfer Act (FTTA) partnerships demonstrate the many advantages of technology transfer and collaboration. EPA and partner organizations create valuable and applicable technologies for the marketplace.

Sterol transfer between cyclodextrin and membranes: similar but not identical mechanism to NPC2-mediated cholesterol transfer.

Science.gov (United States)

McCauliff, Leslie A; Xu, Zhi; Storch, Judith

2011-08-30

Niemann--Pick C disease is an inherited disorder in which cholesterol and other lipids accumulate in the late endosomal/lysosomal compartment. Recently, cyclodextrins (CD) have been shown to reduce symptoms and extend lifespan in animal models of the disease. In the present studies we examined the mechanism of sterol transport by CD using in vitro model systems and fluorescence spectroscopy and NPC2-deficient fibroblasts. We demonstrate that cholesterol transport from the lysosomal cholesterol-binding protein NPC2 to CD occurs via aqueous diffusional transfer and is very slow; the rate-limiting step appears to be dissociation of cholesterol from NPC2, suggesting that specific interactions between NPC2 and CD do not occur. In contrast, the transfer rate of the fluorescent cholesterol analogue dehydroergosterol (DHE) from CD to phospholipid membranes is very rapid and is directly proportional to the acceptor membrane concentration, as is DHE transfer from membranes to CD. Moreover, CD dramatically increases the rate of sterol transfer between membranes, with rates that can approach those mediated by NPC2. The results suggest that sterol transfer from CD to membranes occurs by a collisional transfer mechanism involving direct interaction of CD with membranes, similar to that shown previously for NPC2. For CD, however, absolute rates are slower compared to NPC2 for a given concentration, and the lysosomal phospholipid lysobisphosphatidic acid (LBPA) does not stimulate rates of sterol transfer between membranes and CD. As expected from the apparent absence of interaction between CD and NPC2, the addition of CD to NPC2-deficient fibroblasts rapidly rescued the cholesterol accumulation phenotype. Thus, the recent observations of CD efficacy in mouse models of NPC disease are likely the result of CD enhancement of cholesterol transport between membranes, with rapid sterol transfer occurring during CD--membrane interactions.

Transfer function analysis of radiographic imaging systems

International Nuclear Information System (INIS)

Metz, C.E.; Doi, K.

1979-01-01

The theoretical and experimental aspects of the techniques of transfer function analysis used in radiographic imaging systems are reviewed. The mathematical principles of transfer function analysis are developed for linear, shift-invariant imaging systems, for the relation between object and image and for the image due to a sinusoidal plane wave object. The other basic mathematical principle discussed is 'Fourier analysis' and its application to an input function. Other aspects of transfer function analysis included are alternative expressions for the 'optical transfer function' of imaging systems and expressions are derived for both serial and parallel transfer image sub-systems. The applications of transfer function analysis to radiographic imaging systems are discussed in relation to the linearisation of the radiographic imaging system, the object, the geometrical unsharpness, the screen-film system unsharpness, other unsharpness effects and finally noise analysis. It is concluded that extensive theoretical, computer simulation and experimental studies have demonstrated that the techniques of transfer function analysis provide an accurate and reliable means for predicting and understanding the effects of various radiographic imaging system components in most practical diagnostic medical imaging situations. (U.K.)

Heat transfer in heterogeneous propellant combustion systems

International Nuclear Information System (INIS)

Brewster, M.Q.

1992-01-01

This paper reports that heat transfer plays an important role in several critical areas of heterogeneous, solid-propellant combustion systems. These areas include heat feedback to the propellant surface, heat transfer between burning aluminum droplets and their surroundings, heat transfer to internal insulation systems, and heat transfer to aft-end equipment. Gas conduction dominates heat feedback to the propellant surface in conventional ammonium perchlorate (AP) composite propellants, although particle radiative feedback also plays a significant role in combustion of metalized propellants. Particle radiation plays a dominant role in heat transfer to internal insulation, compared with that of convection. However, conduction by impingement of burning aluminum particles, which has not been extensively studied, may also be significant. Radiative heat loss plays an important role in determining the burning rate of molten aluminum particles due to a highly luminous, oxide particle-laden, detached flame envelope. Radiation by aluminum oxide smoke particles also plays a dominant role in heat transfer from the exhaust plume to aft-end equipment. Uncertainties in aluminum oxide particle-size distribution and optical properties still make it difficult to predict radiative plume heat transfer accurately from first principles

A planning framework for transferring building energy technologies

Energy Technology Data Exchange (ETDEWEB)

Farhar, B C; Brown, M A; Mohler, B L; Wilde, M; Abel, F H

1990-07-01

Accelerating the adoption of new and existing cost-effective technologies has significant potential to reduce the energy consumed in US buildings. This report presents key results of an interlaboratory technology transfer planning effort in support of the US Department of Energy's Office of Building Technologies (OBT). A guiding assumption for planning was that OBT's R D program should forge linkages with existing programs whose goals involved enhancing energy efficiency in buildings. An ad hoc Technology Transfer Advisory Group reviewed the existing analysis and technology transfer program, brainstormed technology transfer approaches, interviewed DOE program managers, identified applicable research results, and developed a framework that management could use in deciding on the best investments of technology transfer resources. Representatives of 22 organizations were interviewed on their views of the potential for transferring energy efficiency technologies through active linking with OBT. The report describes these programs and interview results; outlines OBT tools, technologies, and practices to be transferred; defines OBT audiences; identifies technology transfer functions and presents a framework devised using functions and audiences; presents some 60 example technology transfer activities; and documents the Advisory Group's recommendations. 37 refs., 3 figs., 12 tabs.

Assessing technology transfer in the Clean Development Mechanism

OpenAIRE

Cools, Sara Lena Yri

2007-01-01

This paper presents an operational definition of technology transfer, to be applied in studies of technology transfer in projects under the Kyoto Protocol’s Clean Development Mechanism (CDM). Although the CDM has never been given an explicit mandate for transferring technologies, its contribution in this respect has both been hoped for and exacted. The discussions of technology transfer in CDM projects are however blurred by widely varying conceptions of what technology transfer is. Qu...

Nucleon transfer reactions with radioactive beams

Science.gov (United States)

Wimmer, K.

2018-03-01

Transfer reactions are a valuable tool to study the single-particle structure of nuclei. At radioactive beam facilities transfer reactions have to be performed in inverse kinematics. This creates a number of experimental challenges, but it also has some advantages over normal kinematics measurements. An overview of the experimental and theoretical methods for transfer reactions, especially with radioactive beams, is presented. Recent experimental results and highlights on shell evolution in exotic nuclei are discussed.

TRANSFER PRICES: MECHANISMS, METHODS AND INTERNATIONAL APPROACHES

Directory of Open Access Journals (Sweden)

Pop Cosmina

2008-05-01

Full Text Available Transfer prices are considered the prices paid for the goods or services in a cross-border transaction between affiliates companies, often significant reduced or increased in order to avoid the higher imposing rates from one jurisdiction. Presently, over 60% of cross-border transfers are represented by intra-group transfers. The paper presents the variety of methods and mechanisms used by the companies to transfer the funds from one tax jurisdiction to another in order to avoid over taxation.

Powering physics data transfers with FDT

International Nuclear Information System (INIS)

Maxa, Zdenek; Kcira, Dorian; Legrand, Iosif; Mughal, Azher; Thomas, Michael; Voicu, Ramiro; Ahmed, Badar

2011-01-01

We present a data transfer system for the grid environment built on top of the open source FDT tool (Fast Data Transfer) developed by Caltech in collaboration with the National University of Science and Technology (Pakistan). The enhancement layer above FDT consists of a client program - fdtcp (FDT copy) and a fdtd service (FDT daemon). This pair of components allows for GSI authenticated data transfers and offers to the user (or data movement production service) interface analogous to grid middle-ware data transfer services - SRM (i.e. srmcp) or GridFTP (i.e. globus-url-copy). fdtcp/fdtd enables third-party, batched file transfers. An important aspect is monitoring by means of the MonALISA active monitoring light-weight library ApMon, providing real-time monitoring and arrival time estimates as well as powerful troubleshooting mechanism. The actual transfer is carried out by the FDT application, an efficient application capable of reading and writing at disk speed over wide area networks. FDT's excellent performance was demonstrated e.g. during SuperComputing 2009 Bandwidth Challenge. We also discuss the storage technology interface layer, specifically focusing on the open source Hadoop distributed file system (HDFS), presenting the recently developed FDT-HDFS sequential write adapter. The integration with CMS PhEDEx is described as well. The PhEDEx project (Physics Experiment Data Export) is responsible for facilitating large-scale CMS data transfers across the grid. Ongoing and future development involves interfacing with next generation network services developed by OGF NSI-WG, GLIF and DICE groups, allowing for network resource reservation and scheduling.

Low-Energy Ballistic Transfers to Lunar Halo Orbits

Science.gov (United States)

Parker, Jeffrey S.

2009-01-01

Recent lunar missions have begun to take advantage of the benefits of low-energy ballistic transfers between the Earth and the Moon rather than implementing conventional Hohmann-like lunar transfers. Both Artemis and GRAIL plan to implement low-energy lunar transfers in the next few years. This paper explores the characteristics and potential applications of many different families of low-energy ballistic lunar transfers. The transfers presented here begin from a wide variety of different orbits at the Earth and follow several different distinct pathways to the Moon. This paper characterizes these pathways to identify desirable low-energy lunar transfers for future lunar missions.

Experimental measurement of zero power reactor transfer function

International Nuclear Information System (INIS)

Liang Shuhong

2011-01-01

In order to study the zero power reactor (ZPR) transfer function, the ZPR transfer function expression was deduced with the point reactor kinetics equation, which was disturbed by reactivity input response. Based on the Fourier analysis for the input of triangular wave, the relation between the transfer function and reactivity was got. Validating research experiment was made on the DF-VI fast ZPR. After the disturbed reactivity was measured, the experimental value of the transfer function was got. According to the experimental value and the calculated value, the expression of the ZPR transfer function is proved, whereas the disturbed reactivity is got from the transfer function. (authors)

Engineering heat transfer

International Nuclear Information System (INIS)

Welty, J.R.

1974-01-01

The basic concepts of heat transfer are covered with special emphasis on up-to-date techniques for formulating and solving problems in the field. The discussion progresses logically from phenomenology to problem solving, and treats numerical, integral, and graphical methods as well as traditional analytical ones. The book is unique in its thorough coverage of the fundamentals of numerical analysis appropriate to solving heat transfer problems. This coverage includes several complete and readable examples of numerical solutions, with discussions and interpretations of results. The book also contains an appendix that provides students with physical data for often-encountered materials. An index is included. (U.S.)

9 CFR 322.3 - Transferring products for export.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Transferring products for export. 322... INSPECTION AND CERTIFICATION EXPORTS 1 § 322.3 Transferring products for export. When inspected and passed products for export are transferred from tank cars to other containers on vessels, such transfer shall be...

Visualisation of heat transfer in laminar flows

NARCIS (Netherlands)

Speetjens, M.F.M.; Steenhoven, van A.A.

2009-01-01

Heat transfer in fluid flows traditionally is examined in terms of temperature field and heat-transfer coefficients at non-adiabatic walls. However, heat transfer may alternatively be considered as the transport of thermal energy by the total convective-conductive heat flux in a way analogous to the

Nye OECD-retningslinjer for transfer pricing dokumentation

DEFF Research Database (Denmark)

Rossing, Christian Plesner

2015-01-01

er vedtaget, erstatte det nuværende kapitel V om transfer pricing dokumentation i ‘OECD Transfer Pricing Guidelines for Multinational Enterprises and Tax Administrations’. De gældende danske regler for transfer pricing dokumentation baserer sig på de eksisterende OECD-retningslinjer, og det må...

31 CFR 593.310 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 593.310 Section 593.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN..., trustee, or fiduciary; the creation or transfer of any lien; the issuance, docketing, filing, or levy of...

31 CFR 545.312 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 545.312 Section 545.312 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN...; the creation or transfer of any lien; the issuance, docketing, filing, or levy of or under any...

31 CFR 598.316 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 598.316 Section 598.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN..., trustee, or fiduciary; the creation or transfer of any lien; the issuance, docketing, filing, or levy of...

31 CFR 547.309 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 547.309 Section 547.309 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN...; the creation or transfer of any lien; the issuance, docketing, filing, or levy of or under any...

31 CFR 536.314 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 536.314 Section 536.314 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN...; the creation or transfer of any lien; the issuance, docketing, filing, or levy of or under any...

31 CFR 594.312 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 594.312 Section 594.312 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... creation or transfer of any lien; the issuance, docketing, filing, or levy of or under any judgment, decree...

31 CFR 535.310 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 535.310 Section 535.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN..., or fiduciary; the creation or transfer of any lien; the issuance, docketing, filing, or the levy of...

31 CFR 597.317 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 597.317 Section 597.317 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN...; the creation or transfer of any lien; the issuance, docketing, filing, or levy of or under any...

31 CFR 575.317 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 575.317 Section 575.317 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN..., or fiduciary; the creation or transfer of any lien; the issuance, docketing, filing, or the levy of...

31 CFR 543.309 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 543.309 Section 543.309 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... creation or transfer of any lien; the issuance, docketing, filing, or levy of or under any judgment, decree...

31 CFR 588.309 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 588.309 Section 588.309 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... creation or transfer of any lien; the issuance, docketing, filing, or levy of or under any judgment, decree...

31 CFR 540.312 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 540.312 Section 540.312 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... appointment of any agent, trustee, or fiduciary; the creation or transfer of any lien; the issuance, docketing...

31 CFR 544.309 - Transfer.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 544.309 Section 544.309 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... appointment of any agent, trustee, or fiduciary; the creation or transfer of any lien; the issuance, docketing...

Energy transfer dynamics in Light-Harvesting Dendrimers

Science.gov (United States)

Melinger, Joseph S.; McMorrow, Dale; Kleiman, Valeria D.

2002-03-01

We explore energy transfer dynamics in light-harvesting phenylacetylene symmetric and asymmetric dendrimers. Femtosecond pump-probe spectroscopy is used to probe the ultrafast dynamics of electronic excitations in these dendrimers. The backbone of the macromolecule consists of branches of increasing conjugation length, creating an energy gradient, which funnels energy to an accepting perylene trap. In the case of the symmetric dendrimer (nanostar), the energy transfer efficiency is known to approach nearly unity, although the nature and timescale of the energy transfer process is still unknown. For the asymmetric dendrimers, energy transfer efficiencies are very high, with the possibility of more complex transfer processes. We experimentally monitor the transport of excitons through the light-harvesting dendrimer. The transients show a number of components, with timescales ranging from <300fs to several tens of picoseconds, revealing the complex photophysics taking place in these macromolecules. We interpret our results in terms of the Förster mechanism in which energy transfer occurs through dipole-dipole interactions.

Data Transfer Advisor with Transport Profiling Optimization

Energy Technology Data Exchange (ETDEWEB)

Rao, Nageswara S. [ORNL; Liu, Qiang [ORNL; Yun, Daqing [Harrisburg University; Wu, Chase Qishi [New Jersey Institute of Technology; Kettimuthu, R. [Argonne National Laboratory (ANL); Jung, Eun-sung [Argonne National Laboratory (ANL)

2017-11-01

The network infrastructures have been rapidly upgraded in many high-performance networks (HPNs). However, such infrastructure investment has not led to corresponding performance improvement in big data transfer, especially at the application layer, largely due to the complexity of optimizing transport control on end hosts. We design and implement ProbData, a PRofiling Optimization Based DAta Transfer Advisor, to help users determine the most effective data transfer method with the most appropriate control parameter values to achieve the best data transfer performance. ProbData employs a profiling optimization based approach to exploit the optimal operational zone of various data transfer methods in support of big data transfer in extreme scale scientific applications. We present a theoretical framework of the optimized profiling approach employed in ProbData as wellas its detailed design and implementation. The advising procedure and performance benefits of ProbData are illustrated and evaluated by proof-of-concept experiments in real-life networks.

Understanding the CDM's contribution to technology transfer

International Nuclear Information System (INIS)

Schneider, Malte; Holzer, Andreas; Hoffmann, Volker H.

2008-01-01

Developing countries are increasingly contributing to global greenhouse gas emissions and, consequently, climate change as a result of their rapid economic growth. In order to reduce their impact, the private sector needs to be engaged in the transfer of low-carbon technology to those countries. The Clean Development Mechanism (CDM) is currently the only market mechanism aimed at triggering changes in the pattern of emissions-intensive activities in developing countries and is likely to play a role in future negotiations. In this paper, we analyse how the CDM contributes to technology transfer. We first develop a framework from the literature that delineates the main factors which characterise technology transfer. Second, we apply this framework to the CDM by assessing existing empirical studies and drawing on additional expert interviews. We find that the CDM does contribute to technology transfer by lowering several technology-transfer barriers and by raising the transfer quality. On the basis of this analysis, we give preliminary policy recommendations

Heat Transfer in Directional Water Transport Fabrics

Directory of Open Access Journals (Sweden)

Chao Zeng

2016-10-01

Full Text Available Directional water transport fabrics can proactively transfer moisture from the body. They show great potential in making sportswear and summer clothing. While moisture transfer has been previously reported, heat transfer in directional water transport fabrics has been little reported in research literature. In this study, a directional water transport fabric was prepared using an electrospraying technique and its heat transfer properties under dry and wet states were evaluated, and compared with untreated control fabric and the one pre-treated with NaOH. All the fabric samples showed similar heat transfer features in the dry state, and the equilibrium temperature in the dry state was higher than for the wet state. Wetting considerably enhanced the thermal conductivity of the fabrics. Our studies indicate that directional water transport treatment assists in moving water toward one side of the fabric, but has little effect on thermal transfer performance. This study may be useful for development of “smart” textiles for various applications.

Trophic transfer of pyrene metabolites between aquatic invertebrates

International Nuclear Information System (INIS)

Carrasco Navarro, V.; Leppänen, M.T.; Kukkonen, J.V.K.; Godoy Olmos, S.

2013-01-01

The trophic transfer of pyrene metabolites was studied using Gammarus setosus as a predator and the invertebrates Lumbriculus variegatus and Chironomus riparius as prey. The results obtained by liquid scintillation counting confirmed that the pyrene metabolites produced by the aquatic invertebrates L. variegatus and C. riparius were transferred to G. setosus through the diet. More detailed analyses by liquid chromatography discovered that two of the metabolites produced by C. riparius appeared in the chromatograms of G. setosus tissue extracts, proving their trophic transfer. These metabolites were not present in chromatograms of G. setosus exclusively exposed to pyrene. The present study supports the trophic transfer of PAH metabolites between benthic macroinvertebrates and common species of an arctic amphipod. As some PAH metabolites are more toxic than the parent compounds, the present study raises concerns about the consequences of their trophic transfer and the fate and effects of PAHs in natural environments. - Highlights: ► The trophic transfer of pyrene metabolites between invertebrates was evaluated. ► Biotransformation of pyrene by L. variegatus and C. riparius is different. ► Metabolites produced by L. variegatus and C. riparius are transferred to G. setosus. ► Specifically, two metabolites produced by C. riparius were transferred. - Some of the pyrene metabolites produced by the model invertebrates L. variegatus and C. riparius are transferred to G. setosus through the diet, proving their trophic transfer.

27 CFR 25.186 - Record of beer transferred.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Record of beer transferred..., DEPARTMENT OF THE TREASURY LIQUORS BEER Removals Without Payment of Tax Transfer to Another Brewery of Same Ownership § 25.186 Record of beer transferred. (a) Preparation of invoice. When beer is transferred between...

Research progress on microgravity boiling heat transfer

International Nuclear Information System (INIS)

Xiao Zejun; Chen Bingde

2003-01-01

Microgravity boiling heat transfer is one of the most basic research topics in aerospace technology, which is important for both scientific research and engineering application. Research progress on microgravity boiling heat transfer is presented, including terrestrial simulation technique, terrestrial simulation experiment, microgravity experiment, and flow boiling heat transfer

Photon-momentum transfer in molecular photoionization

Science.gov (United States)

Chelkowski, Szczepan; Bandrauk, André D.

2018-05-01

In most models and theoretical calculations describing multiphoton ionization by infrared light, the dipole approximation is used. This is equivalent to setting the very small photon momentum to zero. Using numerical solutions of the (nondipole) three-dimensional time-dependent Schrödinger equation for one electron in a H2+ molecular ion we investigate the effect the photon-momentum transfer to the photoelectron in an H2+ ion in various regimes. We find that the photon-momentum transfer in a molecule is very different from the transfer in atoms due to two-center interference effects. The photon-momentum transfer is very sensitive to the symmetry of the initial electronic state and is strongly dependent on the internuclear distance and on the ellipticity of the laser.

Translating gene transfer: a stalled effort.

Science.gov (United States)

Greenberg, Alexandra J; McCormick, Jennifer; Tapia, Carmen J; Windebank, Anthony J

2011-08-01

The journey of gene transfer from laboratory to clinic has been slow and fraught with many challenges and barriers. Despite the development of the initial technology in the early 1970s, a standard clinical treatment involving "gene therapy" remains to be seen. Furthermore, much was written about the technology in the early 1990s, but since then, not much has been written about the journey of gene transfer. The translational path of gene transfer thus far, both pitfalls and successes, can serve as a study not only in navigating ethical and safety concerns, but also in the importance of scientist-public interactions. Here, we examine the translational progress of gene transfer and what can be gleaned from its history. © 2011 Wiley Periodicals, Inc.

Nuclear reorganization barriers to electron transfer

International Nuclear Information System (INIS)

Sutin, N.; Brunschwig, B.S.; Creutz, C.; Winkler, J.R.

1988-01-01

The nuclear barrier to electron transfer arises from the need for reorganization of intramolecular and solvent internuclear distances prior to electron transfer. For reactions with relatively small driving force (''normal'' free-energy region) the nuclear factors and rates increase as intrinsic inner-shell and outer-shell barriers decrease; this is illustrated by data for transition metal complexes in their ground electronic states. By contrast, in the inverted free-energy region, rates and nuclear factors decrease with decreasing ''intrinsic'' barriers; this is illustrated by data for the decay of charge-transfer excited states. Several approaches to the evaluation of the outer-shell barrier are explored in an investigation of the distance dependence of the nuclear factor in intramolecular electron-transfer processes. 39 refs., 14 figs., 3 tabs

Transfer Rate Edited experiment for the selective detection of Chemical Exchange via Saturation Transfer (TRE-CEST).

Science.gov (United States)

Friedman, Joshua I; Xia, Ding; Regatte, Ravinder R; Jerschow, Alexej

2015-07-01

Chemical Exchange Saturation Transfer (CEST) magnetic resonance experiments have become valuable tools in magnetic resonance for the detection of low concentration solutes with far greater sensitivity than direct detection methods. Accurate measures of rates of chemical exchange provided by CEST are of particular interest to biomedical imaging communities where variations in chemical exchange can be related to subtle variations in biomarker concentration, temperature and pH within tissues using MRI. Despite their name, however, traditional CEST methods are not truly selective for chemical exchange and instead detect all forms of magnetization transfer including through-space NOE. This ambiguity crowds CEST spectra and greatly complicates subsequent data analysis. We have developed a Transfer Rate Edited CEST experiment (TRE-CEST) that uses two different types of solute labeling in order to selectively amplify signals of rapidly exchanging proton species while simultaneously suppressing 'slower' NOE-dominated magnetization transfer processes. This approach is demonstrated in the context of both NMR and MRI, where it is used to detect the labile amide protons of proteins undergoing chemical exchange (at rates⩾30s(-1)) while simultaneously eliminating signals originating from slower (∼5s(-1)) NOE-mediated magnetization transfer processes. TRE-CEST greatly expands the utility of CEST experiments in complex systems, and in-vivo, in particular, where it is expected to improve the quantification of chemical exchange and magnetization transfer rates while enabling new forms of imaging contrast. Copyright © 2015 Elsevier Inc. All rights reserved.

Transfer Rate Edited experiment for the selective detection of Chemical Exchange via Saturation Transfer (TRE-CEST)

Science.gov (United States)

Friedman, Joshua I.; Xia, Ding; Regatte, Ravinder R.; Jerschow, Alexej

2015-07-01

Chemical Exchange Saturation Transfer (CEST) magnetic resonance experiments have become valuable tools in magnetic resonance for the detection of low concentration solutes with far greater sensitivity than direct detection methods. Accurate measures of rates of chemical exchange provided by CEST are of particular interest to biomedical imaging communities where variations in chemical exchange can be related to subtle variations in biomarker concentration, temperature and pH within tissues using MRI. Despite their name, however, traditional CEST methods are not truly selective for chemical exchange and instead detect all forms of magnetization transfer including through-space NOE. This ambiguity crowds CEST spectra and greatly complicates subsequent data analysis. We have developed a Transfer Rate Edited CEST experiment (TRE-CEST) that uses two different types of solute labeling in order to selectively amplify signals of rapidly exchanging proton species while simultaneously suppressing 'slower' NOE-dominated magnetization transfer processes. This approach is demonstrated in the context of both NMR and MRI, where it is used to detect the labile amide protons of proteins undergoing chemical exchange (at rates ⩾ 30 s-1) while simultaneously eliminating signals originating from slower (∼5 s-1) NOE-mediated magnetization transfer processes. TRE-CEST greatly expands the utility of CEST experiments in complex systems, and in-vivo, in particular, where it is expected to improve the quantification of chemical exchange and magnetization transfer rates while enabling new forms of imaging contrast.

Does a frozen embryo transfer ameliorate the effect of elevated progesterone seen in fresh transfer cycles?

Science.gov (United States)

Healy, Mae Wu; Patounakis, George; Connell, Matt T; Devine, Kate; DeCherney, Alan H; Levy, Michael J; Hill, Micah J

2016-01-01

To compare the effect of progesterone (P) on the day of trigger in fresh assisted reproduction technology (ART) transfer cycles versus its effect on subsequent frozen embryo transfer (FET) cycles. Retrospective cohort study. Large private ART practice. Fresh autologous and FET cycles from 2011-2013. None. Live birth. A paired analysis of patients who underwent both a fresh transfer and subsequent FET cycle and an unpaired analysis of data from all fresh transfer cycles and all FET cycles were performed. We analyzed 1,216 paired and 4,124 unpaired cycles, and P was negatively associated with birth in fresh but not FET cycles in all analyses. Interaction testing of P and cycle type indicated P had a different association with birth in fresh versus FET cycles. When P was ≥ 2 ng/mL at the time of trigger, live birth was more likely in FET versus fresh cycles in the paired analysis (47% vs. 10%), in the unpaired analysis (51% vs. 14%), and in unpaired, good blastocyst only transfer subgroup (51% vs. 29%). Live birth was similar in FET cycles, with P ≥ 2 ng/mL versus P cycles, with P ≥ 2 ng/mL versus P cycle were negatively associated with live birth in the fresh transfer cycles but not in subsequent FET cycles. Freezing embryos and performing a subsequent FET cycle ameliorates the effect of elevated P on live-birth rates. Published by Elsevier Inc.

Transfer of long-lived radionuclides through marine food chains: a review of transfer data

International Nuclear Information System (INIS)

Belot, Y.

1986-01-01

Experimental data on the transfer of long-lived radionuclides through food chains have been summarized from the available literature. The transfer to a given organism is characterized by a transfer factor (TF), defined as the activity in the organism relative to that in the ingested food or sediment. The TFs of Pu, Am and Tc from sediment to benthic species have been directly measured and generally do not exceed a value of 0.1. The TFs from prey to predator are related to uptake and retention parameters whose values can be derived from experimental data. It was estimated that these TFs do not generally exceed unity and that an increase of concentration through a food chain is very unlikely. (author)

New course: "Introduction to knowledge transfer tools"

CERN Multimedia

2014-01-01

The Knowledge Transfer group is now offering a half-day course that will give an introduction to intellectual property, contracts for knowledge transfer, and projects involving industry and other external partners.   The purpose of the course is to give the essential information about how one can secure ownership of inventions and to provide information on legal and contractual considerations when transferring knowledge and technology or when doing collaborative R&D. The course will also highlight some common pitfalls that should be avoided to increase the chances of successfully transferring knowledge and technology. In addition, the course will involve examples of real projects and challenges. The first session will take place the 19 May 2014. To enroll, please follow this link: “Introduction to knowledge transfer tools”.

HRM Practices and MNC knowledge Transfer

DEFF Research Database (Denmark)

Minbaeva, Dana

2004-01-01

and support organizational learning environment, is positively related to the degree ofknowledge transfer to the subsidiary. Moreover, the higher degree of knowledge transfer isexpected when human resource management practices are applied as an integrated system ofinterdependent practices. Hypotheses derived......The purpose of the paper is to determine and empirically examine the effect of human resourcemanagement practices on knowledge transfer within multinational corporations. It is suggested thatthe employment of human resource practices, which affect absorptive capacity of knowledgereceivers...

The gLite File Transfer Service

CERN Document Server

Badino, Paolo; Casey, J; Frohner, A; Kunszt, Peter Z; McCance, G

2006-01-01

In this paper we describe the architecture and implementation of the gLite File Transfer Service (FTS) and list the most basic deployment scenarios. The FTS is addressing the need to manage massive wide-area data transfers on dedicated network channels while allowing the involved sites and users to manage their policies. The FTS manages the transfers in a robust way, allowing for an optimized high throughput between storage systems. The FTS can be used to perform the LHC Tier-0 to Tier-1 data transfer as well as the Tier-1 to Tier-2 data distribution and collection. The storage system peculiarities can be taken into account by fine-tuning the parameters of the FTS managing a particular channel. All the manageability related features as well as the interaction with other components that form part of the overall service are described as well. The FTS is also extensible so that particular user groups or experiment frameworks can customize its behavior both for pre- and post-transfer tasks. The FTS has been desig...

Transfer coating by electron initiated polymerization

International Nuclear Information System (INIS)

Nablo, S.V.

1985-01-01

The high speed and depth of cure possible with electron initiated monomer/oligomer coating systems provide many new opportunities for approaches to product finishing. Moreover, the use of transfer or cast coating using films or metallic surfaces offers the ability to precisely control the surface topology of liquid film surfaces during polymerization. Transfer coating such as with textiles has been a commercial process for many years and the synergistic addition of EB technology permits the manufacture of unusual new products. One of these, the casting paper used in the manufacture of vinyl and urethane fabrics, is the first EB application to use a drum surface for pattern replication in the coating. In this case the coated paper is cured against, and then released from, an engraved drum surface. Recent developments in the use of plastic films for transfer have been applied to the manufacture of transfer metallized and coated paper and paperboard products for packaging. Details of these and related processes will be presented as well as a discussion of the typical product areas using this high speed transfer technology. (author)

Transfer line tests take centre stage

CERN Multimedia

Katarina Anthony

2014-01-01

Last weekend, proton beams came knocking on the LHC's door. Shooting from the SPS and into the two LHC transfer lines, the proton beams were dumped just short of entering the accelerator.   The upper plot shows the trajectory of the first TI2 beam, which reached the end of the transfer line in a single attempt after 18 months of technical stop. Below, a smoother beam trajectory in TI2 after some corrections. For the first time since Run 1, the SPS to LHC transfer lines (TI8 and TI2) transported proton beams just short of the LHC. "We tested the beam instrumentation, the devices that measure the beam intensity, transverse beam profile, position and losses, as well as the beam collimators along the transfer lines," says Reyes Alemany Fernandez, the engineer in charge of the LHC. "We were also able to spot possible bottle necks in the beam trajectory and to perform the first optics measurements." Once the beams arrived at the transfer line beam dumps...

Theory of Periodic Conjugate Heat Transfer

CERN Document Server

Zudin, Yuri B

2012-01-01

This book presents the theory of periodic conjugate heat transfer in a detailed way. The effects of thermophysical properties and geometry of a solid body on the commonly used and experimentally determined heat transfer coefficient are analytically presented from a general point of view. The main objective of the book is a simplified description of the interaction between a solid body and a fluid as a boundary value problem of the heat conduction equation for the solid body. At the body surface, the true heat transfer coefficient is composed of two parts: the true mean value resulting from the solution of the steady state heat transfer problem and a periodically variable part, the periodic time and length to describe the oscillatory hydrodynamic effects. The second edition is extended by (i) the analysis of stability boundaries in helium flow at supercritical conditions in a heated channel with respect to the interaction between a solid body and a fluid; (ii) a periodic model and a method of heat transfer sim...

Group Differences in California Community College Transfers

Science.gov (United States)

Budd, Deborah; Stowers, Genie N. L.

2015-01-01

This study explores the extent to which community colleges succeed in assisting students to transfer to four-year colleges. The study uses data from the California Community College system to test hypotheses about overall transfers and transfers of underrepresented students, It utilizes a framework based upon social reproduction theory (Bowles…

33 CFR 156.120 - Requirements for transfer.

Science.gov (United States)

2010-07-01

... prevent kinking or other damage to the hose and strain on its coupling. (d) Each part of the transfer.... (cc) Smoking is not permitted in the facilities marine transfer area except in designated smoking areas. (dd) Welding, hot work operations and smoking are prohibited on vessels during the transfer of...

Turnarounds to Transfer: Design beyond the Modes