WorldWideScience

Sample records for interlocking intramedullary nailing

  1. Outcome of intramedullary interlocking SIGN nail in tibial diaphyseal fracture

    International Nuclear Information System (INIS)

    Khan, I.; Javed, S.; Khan, G.N.; Aziz, A.

    2013-01-01

    Objective: To determine the outcome of intramedullary interlocking surgical implant generation network (SIGN) nail in diaphyseal tibial fractures in terms of union and failure of implant (breakage of nail or interlocking screws). Study Design: Case series. Place and Duration of Study: Orthopaedics and Spinal Surgery, Ghurki Trust Teaching Hospital, Lahore Medical and Dental College, Lahore, from September 2008 to August 2009. Methodology: Fifty patients aged 14 - 60 years, of either gender were included, who had closed and Gustilo type I and II open fractures reported in 2 weeks, whose closed reduction was not possible or was unsatisfactory and fracture was located 7 cm below knee joint to 7 cm above ankle joint. Fractures previously treated with external fixator, infected fractures and unfit patients were excluded. All fractures were fixed with intramedullary interlocking SIGN nail and were followed clinically and radiographically for union and for any implant failure. Results: Forty one (88%) patients had united fracture within 6 months, 5 (10%) patients had delayed union while 4 (8%) patients had non-union. Mean duration for achieving union was 163 + 30.6 days. Interlocking screws were broken in 2 patients while no nail was broken in any patient. Conclusion: Intramedullary interlocking nailing is an effective measure in treating closed and grade I and II open tibial fractures. It provides a high rate of union less complications and early return to function. (author)

  2. Outcome of intramedullary interlocking SIGN nail in tibial diaphyseal fracture.

    Science.gov (United States)

    Khan, Irfanullah; Javed, Shahzad; Khan, Gauhar Nawaz; Aziz, Amer

    2013-03-01

    To determine the outcome of intramedullary interlocking surgical implant generation network (SIGN) nail in diaphyseal tibial fractures in terms of union and failure of implant (breakage of nail or interlocking screws). Case series. Orthopaedics and Spinal Surgery, Ghurki Trust Teaching Hospital, Lahore Medical and Dental College, Lahore, from September 2008 to August 2009. Fifty patients aged 14 - 60 years, of either gender were included, who had closed and Gustilo type I and II open fractures reported in 2 weeks, whose closed reduction was not possible or was unsatisfactory and fracture was located 7 cm below knee joint to 7 cm above ankle joint. Fractures previously treated with external fixator, infected fractures and unfit patients were excluded. All fractures were fixed with intramedullary interlocking SIGN nail and were followed clinically and radiographically for union and for any implant failure. Forty one (88%) patients had united fracture within 6 months, 5 (10%) patients had delayed union while 4 (8%) patients had non-union. Mean duration for achieving union was 163 + 30.6 days. Interlocking screws were broken in 2 patients while no nail was broken in any patient. Intramedullary interlocking nailing is an effective measure in treating closed and grade I and II open tibial fractures. It provides a high rate of union less complications and early return to function.

  3. Tibiotalocalcaneal arthrodesis with a curved, interlocking, intramedullary nail.

    Science.gov (United States)

    Budnar, Vijaya M; Hepple, Steve; Harries, William G; Livingstone, James A; Winson, Ian

    2010-12-01

    Tibiotalocalcaneal fusion with a straight rod has a risk of damaging the lateral plantar neurovascular structures and may interfere with maintaining normal heel valgus position.We report the results of a prospective study of tibiotalocalcaneal (TTC) arthrodesis with a short, anatomically curved interlocking, intramedullary nail. Forty-five arthrodesis in 42 patients, performed between Jan 2003 and Oct 2008, were prospectively followed. The mean followup was 48 (range, 10 to 74) months. The main indications for the procedure were failed ankle arthrodesis with progressive subtalar arthritis, failed ankle arthroplasty and complex hindfoot deformity. The outcome was measured by a combination of pre and postoperative clinical examination, AOFAS hindfoot scores, SF-12 scores and radiological assessment. Union rate was 89% (40/45). Eighty-two percent (37/45) reported improvement in pain and 73% (33/45) had improved foot function. Satisfactory hindfoot alignment was achieved in 84% (38/45). Postoperatively there was a mean improvement in the AOFAS score of 37. Complications included a below knee amputation for persistent deep infection, five nonunions, and three delayed unions. Four nails, six proximal and six distal locking screws were removed for various causes. Other complications included two perioperative fractures, four superficial wound infections and one case of lateral plantar nerve irritation. With a short, anatomically curved intramedullary nail, we had a high rate of tibiotalocalcaneal fusion with minimal plantar neurovascular complications. We believe a short, curved intramedullary nail, with its more lateral entry point, helped maintain hindfoot alignment.

  4. Finite Element Analysis of Absorbable Sheath to Prevent Stress Shielding of Tibial Interlocking Intramedullary Nail

    Science.gov (United States)

    Dong, Yansheng; Wang, Yongqing; Dong, Limin; Jia, Peng; Lu, Fengcheng

    2017-07-01

    The nail with absorbable sheath (AS nail) is designed to reduce the stress shielding effect of internal fixation with interlocking intramedullary nail. In order to verify its feasibility, two types of the finite element models of internal fixation of tibia with the AS nail and the common metal nail (CM nail) are established using the Softwares of Mimics, Geomagic, SolidWorks and ANSYS according to the CT scanning data of tibia. The result of the finite element analysis shows that the AS nail has great advantages compared with the CM nail in reducing the stress shielding effect in different periods of fracture healing. The conclusion is that the AS nail can realize the static fixation to the dynamic fixation from the early to the later automatically to shorten the time of fracture healing, which also provides a new technique to the interlocking intramedullary nail.

  5. Shielding of the patient's gonads during intramedullary interlocking femoral nailing.

    Science.gov (United States)

    Kwong, L M; Johanson, P H; Zinar, D M; Lenihan, M R; Herman, M W

    1990-12-01

    Levels of exposure to radiation were recorded at sixty sites in fifteen patients during intramedullary interlocking femoral nailing. Radiation film dosimeters were placed at four gonadal sites on each subject. A standard male-gonad cup or a pelvic drape of 0.5-millimeter-thick lead-equivalent was put in place to shield the gonads. A second set of four dosimeters was placed external to the shield to approximate unprotected exposure. The total duration of the fluoroscopy averaged five minutes (range, thirty seconds to fourteen minutes). The total exposure to radiation external to the shield was 35 +/- 34 millirems at the male gonadal sites and 17 +/- 11 millirems at the female gonadal sites. With use of the gonadal shield, exposure to radiation was not measurable in thirteen of the fifteen patients. The differences between the exposures of the shielded and unshielded sites to radiation were statistically significant (p less than 0.001). The highest level of gonadal exposure was found with the treatment of proximal femoral fractures and with the use of statically locked nails. Regardless of the conditions, and for all types of fractures and locations, our results demonstrated that gonadal shielding is justified.

  6. Shielding of the patient's gonads during intramedullary interlocking femoral nailing

    International Nuclear Information System (INIS)

    Kwong, L.M.; Johanson, P.H.; Zinar, D.M.; Lenihan, M.R.; Herman, M.W.

    1990-01-01

    Levels of exposure to radiation were recorded at sixty sites in fifteen patients during intramedullary interlocking femoral nailing. Radiation film dosimeters were placed at four gonadal sites on each subject. A standard male-gonad cup or a pelvic drape of 0.5-millimeter-thick lead-equivalent was put in place to shield the gonads. A second set of four dosimeters was placed external to the shield to approximate unprotected exposure. The total duration of the fluoroscopy averaged five minutes (range, thirty seconds to fourteen minutes). The total exposure to radiation external to the shield was 35 +/- 34 millirems at the male gonadal sites and 17 +/- 11 millirems at the female gonadal sites. With use of the gonadal shield, exposure to radiation was not measurable in thirteen of the fifteen patients. The differences between the exposures of the shielded and unshielded sites to radiation were statistically significant (p less than 0.001). The highest level of gonadal exposure was found with the treatment of proximal femoral fractures and with the use of statically locked nails. Regardless of the conditions, and for all types of fractures and locations, our results demonstrated that gonadal shielding is justified

  7. Efficacy and Safety of Interlocked Intramedullary Nailing for Open Fracture Shaft of Tibia

    International Nuclear Information System (INIS)

    Ahmad, N.; Awan, A. S.; Sultan, S.; Saifullah, K.; Afridi, S. A.; Afridi, S. K.; Lodhi, F. S.

    2016-01-01

    Background: Due to increasing population and changing human habits the number of accidents and high energy trauma is rising. Management of open fracture tibia is a complex problem and is a challenge for both orthopaedic and plastic surgeons. The study was carried out to ascertain the efficacy and safety of interlocked intra-medullary nailing for open shaft tibial fractures in patients presenting at or after 24 hr of injury. Methods: In this descriptive case series, over a period of 6 moths, 163 consecutive cases of open fracture of tibial shaft were reviewed in terms of clinical profile, time of presentation, and gender distribution. Results: In this study mean age was 30±0.02 years. Males comprised 85 percent of study population while 15 percent were females. Gustilo-I type fracture and Gustilo-II type fracture was diagnosed in 90 percent and 10 percent patients respectively. Thirty three percent patients had wound infection while fracture union was found in 15 percent cases. Moreover interlocked intramedullary nailing for open fracture shaft of tibia was safe in 80 percent patients while this procedure was effective in 85 percent. Conclusion: Un-reamed, interlocked intra-medullary nailing may be considered as a suitable option for treatment of open fractures of tibia. (author)

  8. Advanced interlocking systems to improve heavy-load-bearing characteristics of flexible intramedullary nailing

    Energy Technology Data Exchange (ETDEWEB)

    Berger, Leopold, E-mail: leopold.berger@tuwien.ac.at [Institute of Building Construction and Technology, TU Wien, Karlsplatz 13/206-4, 1040 Vienna (Austria); Eichler, Johannes [Department of Orthopedics and Orthopedic Surgery, Medical University of Graz, Auenbruggerplatz 5/6, 8036 Graz (Austria); Ryll, E. Jonathan S. [Department of Trauma-, Hand- and Reconstructive Surgery, University Hospital Muenster, Westphalian-Wilhelms University, Muenster (Germany); Fischerauer, Stefan [Department of Traumatology, Medical University of Graz, Auenbruggerplatz 5/6, 8036 Graz (Austria); Raschke, Michael J. [Department of Trauma-, Hand- and Reconstructive Surgery, University Hospital Muenster, Westphalian-Wilhelms University, Muenster (Germany); Kolbitsch, Andreas [Institute of Building Construction and Technology, TU Wien, Karlsplatz 13/206-4, 1040 Vienna (Austria); Castellani, Christoph [Department of Pediatric and Adolescence Surgery, Medical University of Graz, Auenbruggerplatz 34, 8036 Graz (Austria); Weinberg, Annelie-Martina [Department of Orthopedics and Orthopedic Surgery, Medical University of Graz, Auenbruggerplatz 5/6, 8036 Graz (Austria)

    2016-11-01

    Flexible intramedullary nailing (FIN) is a minimally invasive and widespread standard method for osteosynthesis of pediatric long bone fractures. In the case of unstable fractures of the lower extremity, interlocking systems need to be used to prevent axial shortening and subsequent perforation of the nail at its insertion site. In the present study, four different screw-fixed interlocking systems for FINs (Hofer TwinPlug with two 3-mm titanium interlocking screws, Hofer FixPlug with 3-mm titanium interlocking screw, Hofer Plug with 3.5-mm titanium interlocking screw, and Hofer Plug with 3-mm titanium interlocking screw) in comparison with the commonly used Ender stainless steel nails (locked with 3.5-mm screw) were experimentally investigated in cadaveric lamb tibiae, regarding their load characteristics and failure modes in the case of heavy loading. The specimens were subjected to sequential axial cyclic loading of 5000cycles with stepwise increase of the load amplitude until failure. Migration of locking screws and internal damage of bone tissue was quantified by micro-computed tomography (CT) imaging. Ender nails failed on average at a peak load of 800 N, TwinPlugs at 1367 N, FixPlugs at 1222 N, Plugs 3.5mm at 1225 N and Plugs 3.0mm at 971 N. TwinPlugs, FixPlugs, and Plugs 3.5mm failed in a slow manner over several hundred loading cycles, whereas Ender nails and Plugs 3.0mm exhibited abrupt failure without any prior indication. Our results confirm that axial stability of FIN can be further improved by screw-fixed plugs by simultaneously avoiding shortcomings of an eye-locked system, which the Ender nails are. Considering biomechanical results, plug interlocking systems with 3.5-mm screws should be favored over conventional Ender nails and plugs with 3-mm screws. - Highlights: • Locked flexible intramedullary nails in lamb tibiae were cyclically loaded. • Strongly different failure modes of locking systems were detected. • Novel screw-fixed plugs are

  9. Do biodegradable magnesium alloy intramedullary interlocking nails prematurely lose fixation stability in the treatment of tibial fracture? A numerical simulation.

    Science.gov (United States)

    Wang, Haosen; Hao, Zhixiu; Wen, Shizhu

    2017-01-01

    Intramedullary interlocking nailing is an effective technique used to treat long bone fractures. Recently, biodegradable metals have drawn increased attention as an intramedullary interlocking nailing material. In this study, numerical simulations were implemented to determine whether the degradation rate of magnesium alloy makes it a suitable material for manufacturing biodegradable intramedullary interlocking nails. Mechano-regulatory and bone-remodeling models were used to simulate the fracture healing process, and a surface corrosion model was used to simulate intramedullary rod degradation. The results showed that magnesium alloy intramedullary rods exhibited a satisfactory degradation rate; the fracture healed and callus enhancement was observed before complete dissolution of the intramedullary rod. Delayed magnesium degradation (using surface coating techniques) did not confer a significant advantage over the non-delayed degradation process; immediate degradation also achieved satisfactory healing outcomes. However, delayed degradation had no negative effect on callus enhancement, as it did not cause signs of stress shielding. To avoid risks of individual differences such as delayed union, delayed degradation is recommended. Although the magnesium intramedullary rod did not demonstrate rapid degradation, its ability to provide high fixation stiffness to achieve earlier load bearing was inferior to that of the conventional titanium alloy and stainless steel rods. Therefore, light physiological loads should be ensured during the early stages of healing to achieve bony healing; otherwise, with increased loading and degraded intramedullary rods, the fracture may ultimately fail to heal. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Shielding of the patient's gonads during intramedullary interlocking femoral nailing

    Energy Technology Data Exchange (ETDEWEB)

    Kwong, L.M.; Johanson, P.H.; Zinar, D.M.; Lenihan, M.R.; Herman, M.W. (Harbor/Univ. of California, Los Angeles Medical Center, Torrance (USA))

    1990-12-01

    Levels of exposure to radiation were recorded at sixty sites in fifteen patients during intramedullary interlocking femoral nailing. Radiation film dosimeters were placed at four gonadal sites on each subject. A standard male-gonad cup or a pelvic drape of 0.5-millimeter-thick lead-equivalent was put in place to shield the gonads. A second set of four dosimeters was placed external to the shield to approximate unprotected exposure. The total duration of the fluoroscopy averaged five minutes (range, thirty seconds to fourteen minutes). The total exposure to radiation external to the shield was 35 +/- 34 millirems at the male gonadal sites and 17 +/- 11 millirems at the female gonadal sites. With use of the gonadal shield, exposure to radiation was not measurable in thirteen of the fifteen patients. The differences between the exposures of the shielded and unshielded sites to radiation were statistically significant (p less than 0.001). The highest level of gonadal exposure was found with the treatment of proximal femoral fractures and with the use of statically locked nails. Regardless of the conditions, and for all types of fractures and locations, our results demonstrated that gonadal shielding is justified.

  11. Comparison of our self-designed rotary self-locking intramedullary nail and interlocking intramedullary nail in the treatment of long bone fractures.

    Science.gov (United States)

    Liu, Bailian; Xiong, Ying; Deng, Hong; Gu, Shao; Jia, Fu; Li, Qunhui; Wang, Daxing; Gan, Xuewen; Liu, Wei

    2014-07-21

    The purpose of this study is to compare the clinical effects of our self-designed rotary self-locking intramedullary nail (RSIN) and interlocking intramedullary nail (IIN) for long bone fractures. A retrospective study was performed in 1,704 patients who suffered bone fractures and underwent RSIN or IIN operation in our hospital between March 1999 and March 2013, including 494 with femoral fractures, 572 with humeral fractures, and 638 with tibial fractures. Among them, 634 patients were followed up for more than 1 year. The operative time, intraoperative blood loss, postoperative complications, healing rate, and the excellent and good rate of functional recovery were compared between two groups. Compared with IIN group, RSIN group exhibited significantly shorter operative time and less intraoperative blood loss no matter for humeral, femoral, or tibial fractures (all p fractures (both p fracture. In IIN group, nail breakage or loosening occurred in 7 patients with femoral fractures and 16 patients with tibial fractures, radial nerve injury was observed in 8 patients with humeral fractures, and incision infection was present in 2 patients with humeral fractures and 1 patient with femoral fracture. The complication rate of IIN group was significantly higher than that of RSIN group (p knee, and ankle joint functional recovery between RSIN group and IIN group. RSIN may be a reliable and practical alternative method for the treatment of long bone fractures.

  12. [Clinical application of blocking screws and rooting technique in the treatment of distal tibial fracture with interlocking intramedullary nail].

    Science.gov (United States)

    Zhu, Hai-Bing; Wu, Li-Guo; Fang, Zhi-Song; Luo, Cong-Feng; Wang, Qing-Feng; Ma, Yi-Ping; Gao, Hong; Fu, Guo-Hai; Hu, Cheng-Ting

    2012-07-01

    To introduce the clinical method of blocking screws and rooting technique in the treatment of distal tibial fracture with interlocking intramedullary nails. From June 2006 to March 2011, 26 patients with distal tibial fracture were treated with interlocking intramedullary nails using blocking screws and rooting technique, included 18 males and 8 females with an average age of 46.2 years old ranging from 24 to 64 years. According to AO classification: 10 cases of type A1, 4 cases of type A2, 8 cases of type B1, 4 cases of type B2. The average distance of the fractures end to the ankle joint was 85 mm ranging from 55 to 125 mm, the mean time between injured and operation was 4.5 days. The patients were evaluated with pain, range of motion, walking. All cases were followed-up for 6 to 22 months (averaged 15 months). According to Iowa ankle joint grading system,the score was improved from preoperative (66.8 +/- 8.2) to postoperative (94.6 +/- 4.8). All fractures had united, and got satisfactory reduction and stable fixation with no complications had happen such as breakage of screw. Fixation with interlocking intramedullary nail using blocking screws and rooting technique in treating distal tibial fracture, is a safe and effective technique for the improvement of stability.

  13. A comparative study of intramedullary interlocking nailing and minimally invasive plate osteosynthesis in extra articular distal tibial fractures.

    Science.gov (United States)

    Daolagupu, Arup K; Mudgal, Ashwani; Agarwala, Vikash; Dutta, Kaushik K

    2017-01-01

    Extraarticular distal tibial fractures are among the most challenging fractures encountered by an orthopedician for treatment because of its subcutaneous location, poor blood supply and decreased muscular cover anteriorly, complications such as delayed union, nonunion, wound infection, and wound dehiscence are often seen as a great challenge to the surgeon. Minimally invasive plate osteosynthesis (MIPO) and intramedullary interlocking nail (IMLN) are two well-accepted and effective methods, but each has been historically related to complications. This study compares clinical and radiological outcome in extraarticular distal tibia fractures treated by intramedullary interlocking nail (IMLN) and minimally invasive plate osteosynthesis (MIPO). 42 patients included in this study, 21 underwent IMLN and 21 were treated with MIPO who met the inclusion criteria and operated between June 2014 and May 2015. Patients were followed up for clinical and radiological evaluation. In IMLN group, average union time was 18.26 weeks compared to 21.70 weeks in plating group which was significant ( P ankle stiffness, and infection, were seen in interlocking group as compared to plating group. Average functional outcome according to American Orthopedic Foot and Ankle Society score was measured which came out to be 96.67. IMLN group was associated with lesser duration of surgery, earlier weight bearing and union rate, lesser incidence of infection and implant irritation which makes it a preferable choice for fixation of extra-articular distal tibial fractures. However, larger randomized controlled trials are required for confirming the results.

  14. Close Intramedullary Interlocking Nailing Versus Locking Compression Plating In the Treatment of Closed Fracture Shaft of the Tibia.

    Science.gov (United States)

    Kundu, I K; Datta, N K; Chowdhury, A Z; Das, K P; Tarik, M M; Faisal, M A

    2016-07-01

    Fracture of tibial shaft is the commonest site of long bone fractures due to its superficial location involving young or middle-age people. Proper management is an important issue regarding the future effective movements. In this study patients were grouped in closed Intra medullary interlocking nailing and locking compression plating. Post-operative follow up at 2 weeks, 6 weeks, 12 weeks and 3 months thereafter up to 6 months were done. Each of the patients was evaluated clinically and radiologically by tucker criteria of Tuker et al. Patients were assessed for pain on full weight bearing and kneeling, shortening and range of motion of knee and ankle joints. Radiological assessment for union of fracture, alignment of fracture and angulations and position of nail and screws and infection were observed during follow up. A total number of 32 patients were selected but only 27 patients were available for follow up for a period of 6 months. They were grouped into Group A, consisting of 15 patients who took the treatment in the form of closed intramedullary interlocking nailing and Group B, consisting of 12 patients those underwent ORIF with locking compression plating. In both of the groups Motor Vehicle Accident was the main mechanism of trauma. Fracture involving the middle 3rd of the tibia is common in both the groups. During post-operative follow up, four patients in Group A complained anterior knee pain, one patient in Group B had superficial infection, most of the patients had no restriction of movement in the ankle and knee joints and a single patient in Group B showed 1.5cm shortening of the lower limb. Period of hospital stay and fracture union time were less in Group A, which was statistically significant. Both groups showed excellent result with minimum complications. So this study permits to conclude that close IM interlocking nailing and open reduction and internal fixation by locking compression plating is equally effective for the management of close

  15. Fracture Union in Closed Interlocking Nail in Humeral Shaft Fractures

    Directory of Open Access Journals (Sweden)

    Ramji Lal Sahu

    2015-01-01

    Conclusions: The results of the present study indicates that in the presence of proper indications, reamed antegrade intramedullary interlocked nailing appears to be a method of choice for internal fixation of osteoporotic and pathologic fractures.

  16. [Treatment of multi-segment fracture of complex femoral shaft with instrument-assisted reduction combined with intramedullary interlocking nail fixation].

    Science.gov (United States)

    Fan, Ke-Jie; Chen, Ke; Ma, Wen-Long; Tian, Ke-Wei; Ye, Ye; Chen, Hong-Gan; Tang, Yan-Feng; Cai, Hong-Min

    2018-05-25

    To investigate the effect of minimally invasive mini-incision and instrumented reduction combined with interlocking intramedullary nailing in the treatment of patients with multi-segment fracture of complex femoral shaft. From January 2013 to January 2016, 32 patients with multiple fractures segments of femoral shaft were treated with instrumentation-assisted reduction combined with interlocking intramedullary nailing, including 22 males and 10 females with an average age of 45 years old ranging 17 to 68 years old. The time from injured to operation was 5 to 10 days with an average of 7 days. After admission, routine tibial tubercle or supracondylar bone traction was performed. The patient's general condition was evaluated, the operation time and intraoperative blood loss were recorded. According to Thorsen femoral fracture morphology evaluation criteria and Hohl knee function evaluation of postoperative efficacy, postoperative fracture healing, complications and postoperative recovery of limb function were observed. All patients were followed up for 6 to 24 months with an average of 12 months. The operative time ranged from 48 to 76 minutes with an average of 67 min. The intraoperative blood loss was 150 to 400 ml with an average of 220 ml. The surgical incisions all achieved grade A healing. The fractures reached the clinical standard of healing. The fracture healing time ranged from 4.2 to 10.8 months with an average of 5.7 months. There were no nonunion, incision infection and internal fixation fracture, failure and other complications. According to Thorsen femoral fracture morphology evaluation criteria, the result was excellent in 28 cases, good in 3 cases, fair in 1 case. According to Hohl knee function evaluation criteria, the result was excellent in 30 cases, good in 2 cases. Instrument-assisted reduction combined with interlocking intramedullary nail fixation is a safe and effective method for the treatment of complex femoral shaft fractures. It has

  17. Humeral Shaft Fracture: Intramedullary Nailing.

    Science.gov (United States)

    Konda, Sanjit R; Saleh, Hesham; Fisher, Nina; Egol, Kenneth A

    2017-08-01

    This video demonstrates the technique of intramedullary nailing for a humeral shaft fracture. The patient is a 30-year-old man who sustained a gunshot wound to his right arm. The patient was indicated for humeral nailing given the comminuted nature of the diaphysis and to allow for minimal skin incisions. Other relative indications include soft-tissue compromise about the arm precluding a large surgical exposure. This video presents a case of a comminuted humeral shaft fracture treated with an intramedullary nail. Anatomic reduction and stable fixation was obtained with this technique. This case demonstrates a soft-tissue sparing technique of humeral shaft fixation using a humeral intramedullary nail. The technique is easy to perform and has significant benefits in minimizing surgical exposure, decreasing operative time, and decreasing blood loss. In the correct clinical setting, humeral nailing provides an expeditious form of fixation that restores length, alignment, and rotation of the fracture humeral diaphysis.

  18. COMPARATIVE STUDY OF KUNTSCHER’S NAIL VS. INTERLOCKING NAILING FOR FEMORAL ISTHMUS FRACTURES

    Directory of Open Access Journals (Sweden)

    Rajeev Kumar Roy

    2017-05-01

    Full Text Available BACKGROUND Interlocking intramedullary nailing is suitable for comminuted femoral isthmus fractures, but for non-comminuted fractures its benefit over unlocked nailing is debatable. This study was undertaken to compare outcomes of interlocking nailing versus k-nail in such fractures. MATERIALS AND METHODS 40 cases of noncomminuted femoral isthmus fractures treated with interlocking nailing and K-nail from April 1, 2015, to December 1, 2016, were reviewed. Radiological and clinical union rates, bony alignment, complication and knee function were investigated. RESULTS There was no statistical significant difference with regard to union rate, implant failure, infection and fracture alignment in both study groups. Open fixation with K-nail is technically less demanding and requires less operating time; additionally, there is no exposure to radiation and cost of the implant is cheaper. CONCLUSION We therefore conclude that unlocked nailing is still useful for the management of noncomminuted isthmus fractures of the femur.

  19. New Technique: A Novel Femoral Derotation Osteotomy for Malrotation following Intramedullary Nailing

    Directory of Open Access Journals (Sweden)

    S. Jagernauth

    2012-01-01

    Full Text Available A 19-year-old female patient sustained a closed spiral midshaft femoral fracture and subsequently underwent femoral intramedullary nail insertion. At followup she complained of difficulty in walking and was found to have a unilateral in-toeing gait. CT imaging revealed 30 degrees of internal rotation at the fracture site, which had healed. A circumferential osteotomy was performed distal to the united fracture site using a Gigli saw with the intramedullary femoral nail in situ. The static distal interlocking screws were removed and the malrotation was corrected. Two further static distal interlocking screws were inserted to secure the intramedullary nail in position. The osteotomy went on to union and her symptoms of pain, walking difficulty, and in-toeing resolved. Our paper is the first to describe a technique for derotation osteotomy following intramedullary malreduction that leaves the intramedullary nail in situ.

  20. A novel intramedullary nail for micromotion stimulation of tibial fractures.

    LENUS (Irish Health Repository)

    Dailey, Hannah L

    2011-09-20

    BACKGROUND: Animal studies and clinical trials have suggested that early application of controlled axial micromotion can accelerate healing of long bone fractures compared to rigid fixation. However, experimental investigations of micromotion constructs have been limited to external fixators, which have a higher incidence of complications than intramedullary nails. The purpose of this study was to assess whether a novel intramedullary nail design can generate stimulatory micromotion under minimal weight-bearing loads typical of the early healing period. METHODS: Eight cadaver tibiae were reamed, osteotomised, and implanted with commercially-available IM nails fitted with a custom insert that allowed 1mm of axial micromotion after proximal\\/distal interlocking. Specimens were mounted in a materials testing machine and subjected to cyclic axial loading while interfragmentary motion was measured using an extensometer. Implants were also tested in standard statically-locked mode. FINDINGS: The average force required to cause distraction of the fracture gap in micromotion mode was 37.0 (SD 21.7) N. The mean construct stiffness was 1046.8 (SD 193.6) N\\/mm in static locking mode and 512.4 (SD 99.6) N\\/mm in micromotion mode (significantly different, P<0.001). INTERPRETATION: These results support the development of a micromotion-enabled IM nail because the forces required to cause interfragmentary movements are very low, less than the weight of the hanging shank and foot. In contrast to rigid-fixation nails, which require significant weight-bearing to induce interfragmentary motion, the micromotion-enabled nail may allow movement in non-weight-bearing patients during the early healing period when the benefits of mechanical stimulation are most critical.

  1. Treatment of humeral shaft fractures with antegrade intramedullary locking nail.

    Science.gov (United States)

    Tsourvakas, Stefanos; Alexandropoulos, Christos; Papachristos, Ioannis; Tsakoumis, Grigorios; Ameridis, Nikolaos

    2011-12-01

    Antegrade interlocked humeral nailing for stabilization of humeral fractures was introduced many years ago, and studies on this method in the orthopedic literature have shown mixed results. The purpose of this investigation was to document the clinical outcome and complications associated with the use of an antegrade intramedullary nail (T2, Stryker) for the humeral fractures. Between 2005 and 2008, 52 fractures of the humeral shaft were treated operatively with this intramedullary nail in our department. Eight patients were polytraumatized, and four patients had an open fracture. The mean age of patients was 51.7 years. Forty-eight patients had an adequate duration of clinical follow-up (a mean of 18 months) for analysis. Complications were recorded, and the time to union was measured. Shoulder and elbow functions were assessed using the Constant Score and the Morrey Score, respectively. Forty-six fractures healed, with a mean time to clinical union of 10.3 weeks. Two patients developed pseudarthroses. There were four adverse events: two proximal screws backed out, one superficial infection at the insertion point, and one fracture at the distal end of the nail. Ninety-one percentage of patients had an excellent or good shoulder function. Five further operations were necessary: two for treatment of pseudarthroses, two for removal the backed out proximal screws, and one wound debridement for superficial infection. Antegrade humeral nailing is a valid therapeutic option for stabilization of humeral shaft fractures. By strictly adhering to the operation technique, the number and the severity of complications can be reduced. When good fracture alignment and stability are obtained, uneventful bone healing with good functional results is the rule.

  2. Outcomes in closed reamed interlocking nail in fractures of shaft of femur

    International Nuclear Information System (INIS)

    Mohammad, T.; Sawati, A.; Ahmed, A.

    2015-01-01

    Femoral shaft fracture is one of the common fractures seen in accident and emergency department of our hospital. Violent forces are required to break this and strongest of human bones. There are various treatment modalities for femoral shaft fractures in adults like traction, brace, platting, intramedullary nail (IMN), external fixators and inter locking nails. The study was done with an objective to evaluate the results of closed reamed interlocking nail in fractures of shaft of femur. Methods: A prospective study of 114 cases of femoral shaft fractures was carried out at orthopaedic unit of Ayub Teaching Hospital Abbottabad during 1 year. All these cases were treated with statically locked nails under spinal or general anaesthesia. These cases were followed up for up to one year and Results of the interlocking nail were observed in terms of union and complications. Results: Out of 114 patients, 95 underwent union in 90-150 days with a mean of 110.68 days. Ten patients had dynamization within six weeks because of obvious fracture gap in radiograph. There were 3 patients who had non-union, and 6 patients had delayed union which was treated with dynamization. Conclusion: Close reamed interlocking intramedullary nail in femoral shaft fractures is the treatment of choice. Patient rehabilitation is early, hospitalization is short, and fracture healing response is good. (author)

  3. Dosimetry during intramedullary nailing of the tibia.

    Science.gov (United States)

    Kirousis, George; Delis, Harry; Megas, Panagiotis; Lambiris, Elias; Panayiotakis, George

    2009-10-01

    Intramedullary nailing under fluoroscopic guidance is a common operation. We studied the intraoperative radiation dose received by both the patient and the personnel. 25 intramedullary nailing procedures of the tibia were studied. All patients suffered from tibial fractures and were treated using the Grosse-Kempf intramedullary nail, with free-hand technique for fixation of the distal screws, under fluoroscopic guidance. The exposure, at selected positions, was recorded using an ion chamber, while the dose area product (DAP) was measured with a DAP meter, attached to the tube head. Thermoluminescent dosimeters (TLDs) were used to derive the occupational dose to the personnel, and also to monitor the surface dose on the gonads of some of the patients. The mean operation time was 101 (48-240) min, with a mean fluoroscopic time of 72 seconds and a mean DAP value of 75 cGy x cm(2). The surface dose to the gonads of the patients was less than 8.8 mGy during any procedure, and thus cannot be considered to be a contraindication for the use of this technique. Occupational dose differed substantially between members of the operating personnel, the maximum dose recorded being to the operator of the fluoroscopic equipment (0.11 mSv). Our findings underscore the care required by the primary operator not to exceed the dose constraint of 10 mSv per year. The rest of the operating personnel, although they do not receive very high doses, should focus on the dose optimization of the technique.

  4. A STUDY OF THE MANAGEMENT OF OPEN FRACTURES OF TIBIA BY UNREAMED INTERLOCKING NAIL

    Directory of Open Access Journals (Sweden)

    Kuppa Srinivas

    2015-01-01

    Full Text Available AIMS AND OBJECTIVES: To evaluate the results of closed interlocking intramedullary nailing without reaming in the treatment of open fractures of t he tibial shaft and study the difficulties (complications encountered during the operative study. To compare the efficacy of interlocking intramedullary nailing without reaming in treating open fractures of tibia, Time required for the union of fracture, Range of motion of ankle and knee joint, Rate of malunion and mal rotation and Pain at the knee joint. RESULTS: The average age of patient is 32 years,83.33% are males, road traffic accidents account for majority(79.16%,right side involved in 58.33%,gustillo type II and type I compound fractures are common, full range of movements is seen in 66.67% by 12 weeks and union occurred in 95.83% by 9 months. Thirteen (54.17% patients had excellent results, six (25% patients had good results, four (1 6.67% patients had fair results and one (4.16 patient had poor result. CONCLUSION: Unreamed interlocking intramedullary nailing with the help of image intensifier seems feasible in open diaphyseal fractures of tibia with the advantages of minimal blood l oss, low risk of infection, early mobilisation , earlier soft tissue coverage , Promotes early union , minimal hospital stay and early returns to activities

  5. Safe surgical technique: intramedullary nail fixation of tibial shaft fractures.

    Science.gov (United States)

    Zelle, Boris A; Boni, Guilherme

    2015-01-01

    Statically locked, reamed intramedullary nailing remains the standard treatment for displaced tibial shaft fractures. Establishing an appropriate starting point is a crucial part of the surgical procedure. Recently, suprapatellar nailing in the semi-extended position has been suggested as a safe and effective surgical technique. Numerous reduction techiques are available to achieve an anatomic fracture alignment and the treating surgeon should be familiar with these maneuvers. Open reduction techniques should be considered if anatomic fracture alignment cannot be achieved by closed means. Favorable union rates above 90 % can be achieved by both reamed and unreamed intramedullary nailing. Despite favorable union rates, patients continue to have functional long-term impairments. In particular, anterior knee pain remains a common complaint following intramedullary tibial nailing. Malrotation remains a commonly reported complication after tibial nailing. The effect of postoperative tibial malalignment on the clinical and radiographic outcome requires further investigation.

  6. Complications during removal of stainless steel versus titanium nails used for intramedullary nailing of diaphyseal fractures of the tibia

    OpenAIRE

    Mustafa Seyhan; Olcay Guler; Mahir Mahirogullari; Ferdi Donmez; Arel Gereli; Serhat Mutlu

    2018-01-01

    Objectives: Intramedullary nailing is the treatment of choice for fractures of the tibial shaft, which might necessitate the nail removal due to complications in the long-term. Although considered as a low-risk procedure, intramedullary nail removal is also associated with certain complications. Here, we compared the most commonly used stainless steel and titanium nails with respect to the complications during removal and clinical outcome for intramedullary nailing of diaphyseal fractures of ...

  7. Complications during removal of stainless steel versus titanium nails used for intramedullary nailing of diaphyseal fractures of the tibia

    OpenAIRE

    Seyhan, Mustafa; Guler, Olcay; Mahirogullari, Mahir; Donmez, Ferdi; Gereli, Arel; Mutlu, Serhat

    2018-01-01

    Objectives Intramedullary nailing is the treatment of choice for fractures of the tibial shaft, which might necessitate the nail removal due to complications in the long-term. Although considered as a low-risk procedure, intramedullary nail removal is also associated with certain complications. Here, we compared the most commonly used stainless steel and titanium nails with respect to the complications during removal and clinical outcome for intramedullary nailing of diaphyseal fractures of t...

  8. Comprehensive global evolution of intramedullary nailing of ...

    African Journals Online (AJOL)

    there has been great changes in design, materials and basic science ... proposed that the length of intramedullary implants be maximized to ... as intramedullary implant in 1917 (8). .... micro-movements and intermittent compression during.

  9. Hindfoot Valgus following Interlocking Nail Treatment for Tibial Diaphysis Fractures: Can the Fibula Be Neglected?

    Directory of Open Access Journals (Sweden)

    Metin Uzun

    2014-01-01

    Full Text Available Purpose. We evaluated whether intramedullary nail fixation for tibial diaphysis fractures with concomitant fibula fractures (except at the distal one-third level managed conservatively with an associated fibula fracture resulted in ankle deformity and assessed the impact of the ankle deformity on lower extremity function. Methods. Sixty middle one-third tibial shaft fractures with associated fibular fractures, except the distal one-third level, were included in this study. All tibial shaft fractures were anatomically reduced and fixed with interlocking intramedullary nails. Fibular fractures were managed conservatively. Hindfoot alignment was assessed clinically. Tibia and fibular lengths were compared to contralateral measurements using radiographs. Functional results were evaluated using the Knee Injury and Osteoarthritis Outcome Score (KOOS and the Foot and Ankle Disability Index Score (FADI. Results. Anatomic union, defined as equal length in operative and contralateral tibias, was achieved in 60 fractures (100%. Fibular shortening was identified in 42 fractures (68%. Mean fibular shortening was 1.2 cm (range, 0.5–2 cm. Clinical exams showed increased hindfoot valgus in 42 fractures (68%. The mean KOOS was 88.4, and the mean FADI score was 90. Conclusion. Fibular fractures in the middle or proximal one-third may need to be stabilized at the time of tibial intramedullary nail fixation to prevent development of hindfoot valgus due to fibular shortening.

  10. [Intramedullary nailing of the tibia with the expert tibia nail].

    Science.gov (United States)

    Hansen, Matthias; El Attal, René; Blum, Jochen; Blauth, Michael; Rommens, Pol Maria

    2009-12-01

    Restoration of axis, length, and rotation of the lower leg. Sufficient primary stability of the osteosynthesis for functional aftercare. Early functional aftercare to maintain joint mobility. Good bony healing in closed and open fractures. All closed and open fractures of the tibia and complete lower leg fractures (AO 42). Certain extraarticular fractures of the proximal and distal tibia (AO 41 A2/A3; AO 43 A1/A2/A3). Segmental fractures of the tibia. Certain intraarticular fractures of the tibia with use of additional implants (AO 41 C1/C2; AO 43 C1/C2). Stabilization during and after segmental bone transport or callus distraction of the tibia. Patients in poor general condition (e.g., bedridden). Flexion of the knee of less than 90 degrees . Infection in the nail's insertion area. Infection of the tibial cavity. Complex articular fractures of the proximal or distal tibia with joint depression. Closed reduction of the fracture. If necessary, use of reduction clamps through additional stab incisions or open surgical procedures. In some cases, additional osteosynthesis procedures are necessary (e.g., screws). Positioning of the patient may be performed on a radiolucent table or a traction table. Opening of the proximal tibia in line with the medullary canal. Cannulated or noncannulated insertion of the Expert Tibia Nail((R)) with or without reaming of the medullary canal depending on the fracture type and soft-tissue condition. Control of axis, length, and rotation. Distal interlocking with the radiolucent drill and proximal interlocking with the targeting device. Immediate mobilization of ankle joint and knee joint. Depending on the type of fracture, mobilization with 20 kg partial weight bearing or pain-dependent full weight bearing with crutches. X-ray control 6 weeks postoperatively and increased weight bearing depending on the fracture status. In a prospective, international multicentric study, 181 patients with 186 fractures were included between July 2004 and

  11. Skeletal traction and intramedullary nailing cost-effectiveness

    African Journals Online (AJOL)

    In the operative group 24 patients had union with one delayed union while in the traction group 12 patients had union, 9 with mal union and 4 delayed union. Conclusion: Intramedullary nailing is more cost-effective than skeletal traction. It met the dominant strategy, because it was significantly less costly than skeletal ...

  12. ediatric femoral shaft fractures treated by flexible intramedullary nailing.

    Science.gov (United States)

    Kapil Mani, K C; Dirgha Raj, R C; Parimal, Acharya

    2015-01-01

    Nowadays pediatric femoral fractures are more commonly managed with operative treatment rather than conservative treatment because of more rapid recovery and avoidance of prolonged immobilization. Children between the ages of 5-13 years are treated either by traction plus hip spica and flexible/elastic stable retrograde intramedullary nail, or external fixators in the case of open fractures. The aim of this study is to evaluate the outcome of pediatric femoral shaft fractures treated by stainless steel flexible intramedullary nail in children between 5 and 13 years of age. There were 32 cases of femoral shaft fractures which were all fixed with stainless steel flexible intramedullary nail under fluoroscopy. Long leg cast was applied at the time of fixation. Partial weight bearing was started 2 weeks after surgery. Patients were evaluated in follow-up study to observe the alignment of fracture, infection, delayed union, nonunion, limb length discrepancy, motion of knee joint, and time to unite the fracture. We were able to follow up 28 out of 32 patients. The patients were 8.14 years of age on average. The mean hospital stay after operation was 4 days and fracture union time was 9.57 weeks. There were 3 cases of varus angulation, 2 cases of anterior angulation, and 4 cases of limb lengthening. Patients aged between 5 and 13 years treated with flexible intramedullary nail for closed femoral shaft fracture have rapid union and recovery, short rehabilitation period, less immobilization and psychological impact, and cost-effective.

  13. Clinical Outcomes after Open Locked Intramedullary Nailing of ...

    African Journals Online (AJOL)

    2017-12-05

    Dec 5, 2017 ... joint stiffness due to prolonged immobilization.[8,9] Open reduction and internal fixation have reduced some of these complications by enabling early mobilization of the patient after surgery. The gold standard for treating closed femoral shaft fractures currently is closed locked intramedullary nailing.[10-13] ...

  14. Nonunions of the distal tibia treated by reamed intramedullary nailing

    NARCIS (Netherlands)

    Richmond, Jeffrey; Colleran, Kevin; Borens, Olivier; Kloen, Peter; Helfet, David L.

    2004-01-01

    The purpose of this study is to determine the efficacy of reamed intramedullary nailing in the treatment of nonunions of the distal one-fourth of the tibia. Nonunions of the distal tibia are particularly difficult to treat given the short distal segment, the proximity to the ankle joint, and the

  15. The efficacy of single-stage open intramedullary nailing of neglected femur fractures.

    Science.gov (United States)

    Boopalan, P R J V C; Sait, Azad; Jepegnanam, Thilak Samuel; Matthai, Thomas; Varghese, Viju Daniel

    2014-02-01

    Neglected femur fractures are not rare in the developing world. Treatment options include single-stage open reduction and intramedullary nailing, or open release, skeletal traction, and then second-stage open intramedullary nailing, with bone grafting. Single-stage procedures have the potential advantage of avoiding neurovascular complications secondary to acute lengthening, but they require a second operation, with potentially increased resource use and infection risk. We sought to determine the (1) likelihood of union, (2) complications and reoperations, and (3) functional results with single-stage open intramedullary nailing without bone grafting in patients with neglected femur fractures. Between January 2003 and December 2007, 17 consecutive patients presented to our practice with neglected femoral shaft fractures. All were treated with single-stage nailing without bone grafting. There were 15 men and two women with a median age of 27 years. The average time from fracture to treatment was 13 weeks (range, 4-44 weeks). Eleven patients underwent open nailing with interlocked nails and six were treated with cloverleaf Kuntscher nails. Patients were followed for a minimum of 6 months (mean, 33 months; range, 6-72 months). The mean preoperative ROM of the knee was 28° (range, 10°-150°) and femoral length discrepancy was 3.1 cm (range, 1-5 cm). All fractures united and the mean time to union was 16 weeks (range, 7-32 weeks). There were no neurologic complications secondary to acute lengthening. The mean postoperative ROM of the knee was 130° (range, 60°-150°). All patients were able to return to preinjury work. Sixteen patients regained their original femoral length. One-stage open intramedullary nailing of neglected femoral diaphyseal fractures without bone grafting was safe and effective, and obviated the need for a two-stage approach. Although the findings need to be replicated in larger numbers of patients, we believe this technique may be useful in

  16. Segmental transport after unreamed intramedullary nailing. Preliminary report of a "Monorail" system.

    Science.gov (United States)

    Raschke, M J; Mann, J W; Oedekoven, G; Claudi, B F

    1992-09-01

    The Ilizarov method of segmental bone transport has been shown to be an alternative to more conventional treatments of posttraumatic bony defects. After extensive clinical experience with the unreamed tibial nail in open fractures up to Grade IIIb, a new monorail fixation system for callus distraction and segmental bone transport was devised. This Monorail system is composed of an unreamed intramedullary (IM) nail and a unilateral AO distraction device. The new fixation method and the preliminary clinical experience are reported here. Four patients who previously sustained Grades II-IIIb open tibial fractures had an average bony defect of 9 cm. Two patients had previous bony infections. All patients had had serial debridements and myocutaneous flaps were required in three patients. An unreamed IM nail was inserted, and the transport device was applied. After an osteotomy, segmental transport was carried out until docking was achieved. The external fixator was removed after interlocking of the transported segment. The mean duration of external fixation was 17.9 days/cm and the mean period until roentgenographic consolidation of the distraction and nonunion site was 41.2 days/cm. There were two pin-tract infections but no IM infections. One nail broke after osseous consolidation of the regenerate at the distal interlocking site and required exchange. The goal of transport was achieved in all cases without angular or rotational deformity or length discrepancy. There were no neurovascular injuries.

  17. Primary unreamed intramedullary locked nailing in open fractures of tibia

    Directory of Open Access Journals (Sweden)

    Jain Vineet

    2005-01-01

    Full Text Available Background: Fractures of tibia are among the commonest fractures sustained in road traffic accidents. They are frequently open and contaminated. Unreamed nails are considered superior to external fixator in the management of open fractures of tibia. Method: Forty patients with open fractures of tibia, grade I, II, IIIa, IIIb were included in the study. They were managed by primary unreamed intramedullary nailing with adequate soft tissue management. Results: Functional results were excellent in 26 cases, good in 10 cases and fair in 4 cases. Four cases had delayed union. Average time of union was 16.9 weeks. Conclusion: Primary unreamed intramedullary nailing offers advantage of rigid fixation, low incidence of infection, non-union, good functional results and early return to work. An adequate soft tissue management is mandatory in treatment of these fractures.

  18. Results of Closed Intramedullary Nailing using Talwarkar Square Nail in Adult Forearm Fractures

    Directory of Open Access Journals (Sweden)

    Nadeem A Lil

    2012-07-01

    Full Text Available The aim of the study was to evaluate results of closed intramedullary nailing using Talwarkar square nails in adult forearm fractures. We prospectively evaluated 34 patients with both bone forearm fractures. The average time to union was 12.8 (SD +3.2 weeks with cast support for a mean of 8.2 weeks. Union was achieved in 31 out of 34 patients. Using the Grace and Eversmann rating system, 17 patients were excellent, 10 were good, and 4 had an acceptable result. Three patients had non-unions, 2 for the radius and one for the ulna. There were two cases of superficial infection, one subject had olecranon bursitis, and one case of radio-ulnar synostosis. Complication rates associated with the use of square nails were lower compared to plate osteosynthesis and locked intramedullary nails. To control rotation post- operatively, there is a need for application of an above-elbow cast after nailing.

  19. Carbon fiber intramedullary nails reduce artifact in postoperative advanced imaging

    International Nuclear Information System (INIS)

    Zimel, Melissa N.; Hwang, Sinchun; Riedel, Elyn R.; Healey, John H.

    2015-01-01

    This study assessed whether radiolucent carbon fiber reinforced-polyetheretherketone (CFR-PEEK) intramedullary nails decreased hardware artifact on magnetic resonance imaging (MRI) and computed tomography (CT) in vitro and in an oncologic patient population. In vitro and clinical evaluations were done. A qualitative assessment of metal artifact was performed using CFR-PEEK and titanium nail MRI phantoms. Eight patients with a femoral or tibial prophylactic CFR-PEEK nail were retrospectively identified. All patients had postoperative surveillance imaging by MRI, CT, and were followed for a median 20 months (range, 12-28 months). CFR-PEEK images were compared to images from a comparative group of patients with titanium femoral intramedullary nails who had a postoperative MRI or CT. A musculoskeletal-trained radiologist graded visualization of the cortex, corticomedullary junction, and bone-muscle interface, on T1-weighted (T1W), STIR, and contrast-enhanced T1-weighted fat-saturated (T1W FS) sequences of both groups with a five-point scale, performing independent reviews 4 months apart. Statistical analysis used the Wilcoxon rank-sum test and a weighted kappa. Substantially less MRI signal loss occurred in the CFR-PEEK phantom than in the titanium phantom simulation, particularly as the angle increased with respect to direction of the static magnetic field. CFR-PEEK nails had less MRI artifact than titanium nails on scored T1W, STIR, and contrast-enhanced T1W FS MRI sequences (p ≤ 0.03). The mean weighted kappa was 0.64, showing excellent intraobserver reliability between readings. CFR-PEEK intramedullary nail fixation is a superior alternative to minimize implant artifact on MRI or CT imaging for patients requiring long bone fixation. (orig.)

  20. Carbon fiber intramedullary nails reduce artifact in postoperative advanced imaging

    Energy Technology Data Exchange (ETDEWEB)

    Zimel, Melissa N. [Memorial Sloan Kettering Cancer Center, Orthopaedic Surgery Service, Department of Surgery, New York, NY (United States); Hwang, Sinchun [Memorial Sloan Kettering Cancer Center, Department of Radiology, New York, NY (United States); Riedel, Elyn R. [Memorial Sloan Kettering Cancer Center, Department of Epidemiology and Biostatistics, New York, NY (United States); Healey, John H. [Memorial Sloan Kettering Cancer Center, Orthopaedic Surgery Service, Department of Surgery, New York, NY (United States); Weill Medical College of Cornell University, Department of Orthopaedic Surgery, New York, NY (United States)

    2015-09-15

    This study assessed whether radiolucent carbon fiber reinforced-polyetheretherketone (CFR-PEEK) intramedullary nails decreased hardware artifact on magnetic resonance imaging (MRI) and computed tomography (CT) in vitro and in an oncologic patient population. In vitro and clinical evaluations were done. A qualitative assessment of metal artifact was performed using CFR-PEEK and titanium nail MRI phantoms. Eight patients with a femoral or tibial prophylactic CFR-PEEK nail were retrospectively identified. All patients had postoperative surveillance imaging by MRI, CT, and were followed for a median 20 months (range, 12-28 months). CFR-PEEK images were compared to images from a comparative group of patients with titanium femoral intramedullary nails who had a postoperative MRI or CT. A musculoskeletal-trained radiologist graded visualization of the cortex, corticomedullary junction, and bone-muscle interface, on T1-weighted (T1W), STIR, and contrast-enhanced T1-weighted fat-saturated (T1W FS) sequences of both groups with a five-point scale, performing independent reviews 4 months apart. Statistical analysis used the Wilcoxon rank-sum test and a weighted kappa. Substantially less MRI signal loss occurred in the CFR-PEEK phantom than in the titanium phantom simulation, particularly as the angle increased with respect to direction of the static magnetic field. CFR-PEEK nails had less MRI artifact than titanium nails on scored T1W, STIR, and contrast-enhanced T1W FS MRI sequences (p ≤ 0.03). The mean weighted kappa was 0.64, showing excellent intraobserver reliability between readings. CFR-PEEK intramedullary nail fixation is a superior alternative to minimize implant artifact on MRI or CT imaging for patients requiring long bone fixation. (orig.)

  1. Multiple intramedullary nailing of proximal phalangeal fractures of hand

    Directory of Open Access Journals (Sweden)

    Patankar Hemant

    2008-01-01

    Full Text Available Background: Proximal phalangeal fractures are commonly encountered fractures in the hand. Majority of them are stable and can be treated by non-operative means. However, unstable fractures i.e. those with shortening, displacement, angulation, rotational deformity or segmental fractures need surgical intervention. This prospective study was undertaken to evaluate the functional outcome after surgical stabilization of these fractures with joint-sparing multiple intramedullary nailing technique. Materials and Methods: Thirty-five patients with 35 isolated unstable proximal phalangeal shaft fractures of hand were managed by surgical stabilization with multiple intramedullary nailing technique. Fractures of the thumb were excluded. All the patients were followed up for a minimum of six months. They were assessed radiologically and clinically. The clinical evaluation was based on two criteria. 1. total active range of motion for digital functional assessment as suggested by the American Society for Surgery of Hand and 2. grip strength. Results: All the patients showed radiological union at six weeks. The overall results were excellent in all the patients. Adventitious bursitis was observed at the point of insertion of nails in one patient. Conclusion: Joint-sparing multiple intramedullary nailing of unstable proximal phalangeal fractures of hand provides satisfactory results with good functional outcome and fewer complications.

  2. Flexible Intramedullary Nailing for Paediatric Shaft of Femur Fractures – Does the Number of Nails Alter the Outcome?

    Directory of Open Access Journals (Sweden)

    B Kanthimathi

    2011-07-01

    Full Text Available BACKGROUND: The use of flexible intramedullary nailing, allowing micro movement at the fracture site, results in excellent outcomes regardless of the number of nails used. We undertook analysis of the outcomes of flexible nailing with reference to the number of nails used. METHODS: Twenty patients with diaphyseal femur fracture aged 5-15 years were treated with retrograde flexible intramedullary nailing. The number of nails varied from single to multiple. The results were analysed with regard to the number of nails used. RESULTS: The mean patient age was 7.9 years; patients were followed up for a mean duration of 13.2 months. Those with two and three nails had similar results. CONCLUSION: A minimum of two flexible nails is needed for optimal fixation in paediatric femur shaft fractures. Also, limiting the number of implants to two is cost effective, decreases operative time, reduces radiation exposure and offers equal results to that of three nails.

  3. reoperation rates following intramedullary nailing versus external

    African Journals Online (AJOL)

    Results: Fifty patients were enrolled and completed follow-up at all-time points; twenty-six were treated with IM nail and ... patients over 18 years with Gustilo Type 3A open tibia .... in a randomized fashion with larger sample sizes are.

  4. Management of long bone fractures using SIGN nail: experience ...

    African Journals Online (AJOL)

    Background: Intramedullary nailing with interlocking nails has become the treatment of choice for closed diaphyseal fractures of femur and tibia. When possible locked nailing should be performed as a closed procedure. Fractures fixed by interlocking nailing have comparatively less complications in fracture healing.

  5. Achieving interlocking nails without using an image intensifier.

    Science.gov (United States)

    Ikem, Innocent C; Ogunlusi, Johnson D; Ine, Henry R

    2007-08-01

    Interlocking nails are commonly performed using an image intensifier. These are expensive and are not readily available in most resource-poor countries of the world. The aim of this study was to achieve interlocking nailing without the use of an image intensifier. This is a prospective descriptive analysis of 40 consecutive cases seen with shaft fractures of the humerus, femur, and tibia. Fracture fixation was done using Surgical Implant Generation Network (SIGN) nails. Forty limbs in 34 patients were studied. There were 12 females and 22 males, giving a ratio of 1:2. The mean age (years) was 35.75+/-13.16 and the range was 17-70 years. The studied bones were: humerus 10%, femur 65%, and tibia 25%. The fracture lines were: transverse 40%, oblique 15%, and communited 45%. Fracture grades were: closed 90%, grade I, 5%, grade II, 2.5%, and grade IIIA, 2.5%. Surgical approaches were: antegrade 62.5% and retrograde 37.5%. Indications for fixation were: recent fracture 92.5%, non-union 5%, and malunion 3%. Methods of reductions were: open 85% and closed 15%. The mean follow-up period (years) was 1.50+/-0.78. The union time averaged 3 months. Complication was mainly screw loosening due to severe osteoporoses in one case. It is, therefore, concluded that, with the aid of external jigs and slot finders, interlocking can be achieved without an image intensifier.

  6. Alignment After Intramedullary Nailing of Distal Tibia Fractures Without Fibula Fixation.

    Science.gov (United States)

    De Giacomo, Anthony F; Tornetta, Paul

    2016-10-01

    To evaluate the efficacy of intramedullary nailing of distal tibia fractures using modern techniques, without fibula fixation, in obtaining and maintaining alignment. Retrospective case review. Level-I academic trauma center. One hundred thirty-two consecutive patients with distal tibia fractures. Intramedullary nail of distal tibia fracture, without fibula fixation, was performed in consecutive patients using modern reduction techniques. Malalignment and malunion were defined as >5 degrees of varus/valgus angulation or anterior/posterior angulation on the initial postoperative or final anteroposterior and lateral x-rays. There were 122 consecutive patients (86 men and 36 women) 16-93 years of age (average, 43 years) with 36 (30%) open and 85 (70%) closed fractures with complete follow-up. Mechanism of injury did not predict the presence or level of fibula fracture. Upon presentation, varus/valgus and procurvatum/recurvatum angulation was greatest when the fibula was fractured at the level of the tibia fracture (P = 0.001 and 0.028). The most common intraoperative reduction aids were nailing in relative extension, transfixion external fixation, and clamps at the fracture site. The OTA fracture type or level/presence of fibula fracture did not influence malalignment (P = 0.86 and 0.66), malunion (P = 0.81 and 0.79), or the change in alignment during union, which averaged 0.9 degrees. We found an overall low rate of both malalignment (2%) and malunion (3%) after intramedullary nailing of distal tibial shaft fracture without fibula fixation. We conclude that when modern nailing techniques are used, which allow for confirmation of reduction by visualization in fluoroscopy, from nail placement to distal interlocking, fibula fixation is not necessary to obtain or maintain alignment. Furthermore, standard 2 medial to lateral screws distally afford adequate stability to hold the reduction during union with a 0.9-degree difference in the initial postoperative and final

  7. Long-term functional outcome following intramedullary nailing of femoral shaft fractures

    NARCIS (Netherlands)

    el Moumni, Mostafa; Voogd, Emma Heather; ten Duis, Henk Jan; Wendt, Klaus Wilhelm

    Background: The management of femoral shaft fractures using intramedullary nailing is a popular method. The purpose of this study was to evaluate the long-term functional outcome after antegrade or retrograde intramedullary nailing of traumatic femoral shaft fractures. We further determined

  8. [Intramedullary nailing of the distal tibia illustrated with the Expert(TM) tibia nail].

    Science.gov (United States)

    El Attal, R; Hansen, M; Rosenberger, R; Smekal, V; Rommens, P M; Blauth, M

    2011-12-01

    Restoration of axis, length, and rotation of the lower leg. Sufficient primary stability of the osteosynthesis for functional aftercare and to maintain joint mobility. Good bony healing in closed and open fractures. Closed and open fractures of the tibia and complete lower leg fractures distal to the isthmus (AO 42), extraarticular fractures of the distal tibia (AO 43 A1/A2/A3), segmental fractures of the tibia with a fracture in the distal tibia, and certain intraarticular fractures of the distal tibia without impression of the joint line with the use of additional implants (AO 43 C1) Patient in reduced general condition (e.g., bed ridden), flexion of the knee of less than 90°, patients with knee arthroplasty of the affected leg, infection in the area of the nail's insertion, infection of the tibial cavity, complex articular fractures of the proximal or distal tibia with joint depression. Closed reduction of the fracture preferably on a fracture table or using a distractor or an external fixation frame. If necessary, use pointed reduction clamps or sterile drapery. In some cases, additional implants like percutaneous small fragment screws, poller screws or k-wires are helpful. Open reduction is rarely necessary and must be avoided. Opening of the proximal tibia in line with the medullary canal. Canulated insertion of the Expert(TM) tibia nail (ETN; Synthes GmbH, Oberdorf, Switzerland) with reaming of the medullary canal. Control of axis, length, and rotation. Distal interlocking with the radiolucent drill and proximal interlocking with the targeting device. Immediate mobilization of ankle and knee joint. Mobilization with 20 kg weight-bearing with crutches. X-ray control 6 weeks postoperatively and increased weight-bearing depending on the fracture status. In cases with simple fractures, good bony contact, or transverse fracture pattern, full weight-bearing at the end of week 6 is targeted. Between July 2004 and May 2005, 180 patients were included in a

  9. ROLE OF INTRAMEDULLARY NAILING IN DEFORMITY CORRECTION OF LONG BONES

    Directory of Open Access Journals (Sweden)

    Anne

    2016-03-01

    Full Text Available INTRODUCTION Correction of multi-apical long bone deformities in lower limbs is a challenging task. Correction of these deformities with Ilizarov–type external fixators, treating one segment at a time increases the total time of correction and decreases the patients’ compliance with considerable discomfort. Hence we preferred intramedullary nail devices which combines accuracy, minimal invasiveness, with patient compliance and with excellent functional outcome. Temporary external fixator used per-operatively in some cases to retain the correction till the insertion of the nail. Eight patients in the age group of 12-35 yrs. presented to us over the last 1 year with multi-apical lower limb deformities. The radiological parameters described by Paley et al 1 were used to assess the pre and post–operative radiographs. With the help of anatomical axes the CORA was identified. Percutaneous osteotomy and stabilization with intramedullary nail was done to correct the deformity. 13 Femora and 7 Tibiae were subjected to correction by this technique and followed up over a period of 1 year (Nov-2014 to Nov-2015 at MIMS Vizianagaram hospital.

  10. Complications during removal of stainless steel versus titanium nails used for intramedullary nailing of diaphyseal fractures of the tibia.

    Science.gov (United States)

    Seyhan, Mustafa; Guler, Olcay; Mahirogullari, Mahir; Donmez, Ferdi; Gereli, Arel; Mutlu, Serhat

    2018-02-01

    Intramedullary nailing is the treatment of choice for fractures of the tibial shaft, which might necessitate the nail removal due to complications in the long-term. Although considered as a low-risk procedure, intramedullary nail removal is also associated with certain complications. Here, we compared the most commonly used stainless steel and titanium nails with respect to the complications during removal and clinical outcome for intramedullary nailing of diaphyseal fractures of the tibia. Sixty-two patients (26 females, 36 males) were included in this retrospective study. Of the removed nails, 24 were of stainless steel and 38 of titanium. Preoperative and intraoperative parameters, such as implant discomfort, anterior knee pain, operating time and amount of bleeding, and postoperative outcomes were evaluated for each patient. Titanium nail group had more, but not statistically significant, intraoperative complications than stainless steel group during the removal of nails (p = .4498). Operating time and amount of intraoperative bleeding were significantly higher in titanium group than stainless steel group (p = .0306 and p titanium nails than those of stainless steel nails, whereas there was no difference in terms of postoperative SF-36 and KSS scores. In conclusion, although greater bone contact with titanium increases implant stability, nail removal is more difficult, resulting in more longer surgical operation and more intraoperative bleeding. Therefore, we do not recommend titanium nail removal in asymptomatic patients.

  11. Complications during removal of stainless steel versus titanium nails used for intramedullary nailing of diaphyseal fractures of the tibia

    Directory of Open Access Journals (Sweden)

    Mustafa Seyhan

    2018-02-01

    Full Text Available Objectives: Intramedullary nailing is the treatment of choice for fractures of the tibial shaft, which might necessitate the nail removal due to complications in the long-term. Although considered as a low-risk procedure, intramedullary nail removal is also associated with certain complications. Here, we compared the most commonly used stainless steel and titanium nails with respect to the complications during removal and clinical outcome for intramedullary nailing of diaphyseal fractures of the tibia. Patients and methods: Sixty-two patients (26 females, 36 males were included in this retrospective study. Of the removed nails, 24 were of stainless steel and 38 of titanium. Preoperative and intraoperative parameters, such as implant discomfort, anterior knee pain, operating time and amount of bleeding, and postoperative outcomes were evaluated for each patient. Results: Titanium nail group had more, but not statistically significant, intraoperative complications than stainless steel group during the removal of nails (p = .4498. Operating time and amount of intraoperative bleeding were significantly higher in titanium group than stainless steel group (p = .0306 and p < .001, respectively. Preoperative SF-36 physical component and KSS scores were significantly lower in patients who had removal of titanium nails than those of stainless steel nails, whereas there was no difference in terms of postoperative SF-36 and KSS scores. Conclusion: In conclusion, although greater bone contact with titanium increases implant stability, nail removal is more difficult, resulting in more longer surgical operation and more intraoperative bleeding. Therefore, we do not recommend titanium nail removal in asymptomatic patients. Keywords: Fractures of tibial shaft, Removal of intramedullary nailing, Stainless steel nail, Titanium nail

  12. Flexible intramedullary nailing for femoral diaphyseal fractures in children

    Directory of Open Access Journals (Sweden)

    Rojan Tamrakar

    2017-12-01

    Full Text Available Background & Objectives: Although various treatment options are available for the treatment of femoral diaphyesal fractures in children, the titanium flexible nailing has gained popularity because it is safe, easy procedure with rapid recovery and high success rate. The aim of this study was to evaluate the outcome of titanium elastic nails in treating paediatric femoral diaphyesal fractures at Patan Hospital.Materials & Methods: There were 35 cases which were all fixed with titanium flexible intramedullary nail under image intensifier at the Patan hospital from January 2013 and December 2015. Patients were evaluated in follow-ups to observe the alignment of fracture, infection, delayed union, nonunion, limb length discrepancy, implant failure, range of movement of hip and knee joints, and time to unite the fracture. The final results were evaluated using criteria of titanium elastic nail (TEN outcome score described by Flynn et al.Results: The mean age of the patients was 8.51 years. Among 35 patients (22 boys and 13 girls, there were 19 mid-shaft fractures, nine proximal third fractures and seven distal third fractures. Fracture patterns were transverse (22, oblique (10, spiral (2, and comminuted (2. The mean time for fracture union was 8.17 weeks radiologically whereas 9.83 weeks clinically. According to TEN outcome score, excellent and good results were in 28 cases (80% and seven cases (20% respectively.Conclusion: Flexible titanium nailing is a safe and satisfactory treatment for diaphyseal femoral fractures in children, because it provides rapid recovery, short rehabilitation and immobilization as well as very high union rate with few complications.

  13. Fracture Union in Closed Interlocking Nail in Femoral Fracture

    Directory of Open Access Journals (Sweden)

    R L Sahu

    2010-09-01

    Full Text Available INTRODUCTION: Fractures shaft femur is a major cause of morbidity and mortality in patients with lower extremity injuries. The objective of this study was to find out the outcome of Interlocking nail in fracture femur. METHODS: This study was conducted in the Department of Orthopaedic surgery in M. M. Medical College from July 2006 to November 2008. Seventy eight patients were recruited from Emergency and out patient department having closed fracture of femoral shaft. All patients were operated under general or spinal anesthesia. All patients were followed for nine months. RESULTS: Out of seventy eight patients, sixty nine patients underwent union in 90 to 150 days with a mean of 110.68 days. Touch down weight bearing was started on 2nd post-operative day. Complications found in four patients who had non-union, and five patients had delayed union which was treated with dynamization and bone graft. The results were excellent in 88.46% and good in 6.41% patients. CONCLUSIONS: We concluded that this technique is advantageous because of early mobilization (early weight bearing, less complication with good results and is economical. Keywords: close reamed interlocking nail, dynamization, femoral shaft fractures, union

  14. Complications and Functional Recovery in Treatment of Femoral Shaft Fractures with Unreamed Intramedullary Nailing

    OpenAIRE

    Sadic, Sahmir; Custovic, Svemir; Smajic, Nedim; Fazlic, Mirsad; Vujadinovic, Aleksandar; Hrustic, Asmir; Jasarevic, Mahir

    2014-01-01

    ABSTRACT Introduction: Fracture of the femoral shaft is a common fracture encountered in orthopedic practice. In the 1939, K?ntscher introduced the concept of intramedullary nailing for stabilization of long bone fractures. Intramedullary nailing has revolutionized the treatment of fractures. Material and methods: The study included 37 male patients and 13 female patients, averaged 39?20,5 years (range, 16 to 76 years). Results and discussion: There were 31 left femurs and 21 right femurs fra...

  15. Mating of a PROSTALAC spacer with an intramedullary nail for reconstruction of an infected interprosthetic femoral shaft fracture: a case report.

    Science.gov (United States)

    Kamath, Atul F; Austin, Daniel; Lee, Gwo-Chin

    2012-08-01

    Reconstruction for concurrent infection of an ipsilateral total hip arthroplasty (THA) and total knee arthroplasty (TKA) is a challenge. We report a 2-stage reconstruction of a THA for chronic infection of both the THA and TKA with severe femoral bone loss secondary to interprosthetic fractures. The reconstruction involved using a custom-made, temporary, antibiotic-impregnated PROSTALAC spacer mated with an intramedullary nail. The acetabulum was then exposed and the necrotic cartilage was removed and curetted. The acetabulum was reamed to accept a PROSTALAC acetabular shell. The shell was cemented into the acetabulum with antibiotic cement. The custom-made spacer was then inserted distally first into the tibia. The distal end of the intramedullary nail was interlocked with a bicortical bolt to minimise nail rotation. Antibiotic-impregnated cement was moulded around the nail and spacer. The proximal end of the spacer was then reduced into the acetabular socket, and the joint was irrigated and the wound closed. A customised abduction brace was fitted, and partial weight bearing was allowed. Sufficient leg length, soft-tissue tension, and range of hip motion were restored, and a total femur and constrained liner was re-implanted 4 months later. Mating of an intramedullary nail with a PROSTALAC spacer is a viable reconstructive option.

  16. [Comparison of LCP and locked intramedullary nailing fixation in treatment of tibial diaphysis fractures].

    Science.gov (United States)

    Huang, Peng; Tang, Peifu; Yao, Qi

    2007-11-01

    To evaluate the treatment results of LCP and locked intramedullary nailing for tibial diaphysis fractures. From October 2003 to April 2006, 55 patients with tibial diaphysis fractures (58 fractures) were treated. Of them there were 39 males and 16 females with an average of 39 years years ( 14 to 62 years). The fractures were on the left side in 27 patients and on the right side in 31 patients (3 patients had bilateral involvement). Thirty-four fractures were treated by intramedullary nailing (intramedullary nailing group) and 24 fractures by LCP fixation (LCP group). The average disease course was 3 days (intramedullary nailing group) and 3.1 days (LCP group). The operation time, the range of motion of knee and ankle joints, fracture healing time, and complications were evaluated. The patients were followed up 8-26 months (13 months on average). The operation time was 84.0+/-9.2 min (intramedullary nailing group) and 69.0+/-8.4 min (LCP group); the average cost in hospital was yen 19,297.78 in the intramedullary nailing group and yen 14,116.55 in the LCP group respectively, showing significant differences (P 0.05). The doral flexion and plantar flexion of ankle joint were 13.0+/-1.7 degrees and 41.0+/-2.6 degrees in intramedullary nailing group, and 10.0+/-1.4 degrees and 44.0+/-2.3 degrees in LCP group, showing no significant differences (P>0.05). The mean healing time was 3.3 months in intramedullary nailing group, and 3. 1 months in LCP group. Length discrepancy occurred in 1 case (2.5 cm), delayed union in 1 case and nailing end trouble in 3 cases in intramedullary nailing group; moreover rotation deformity occurred 1 case and anterior knee pain occurred in 6 cases (17.1%). One angulation and open fracture developed osteomyelitis in 1 case 1 week postoperatively and angulation deformity occurred in 1 case of distal-third tibial fractures in LCP group. LCP and locked intramedullary nailing can achieve satisfactory results in treating tibial diaphysis fracture

  17. Removal torque of nail interlocking screws is related to screw proximity to the fracture and screw breakage.

    Science.gov (United States)

    White, Alexander A; Kubacki, Meghan R; Samona, Jason; Telehowski, Paul; Atkinson, Patrick J

    2016-06-01

    Studies have shown that titanium implants can be challenging to explant due to the material's excellent biocompatibility and resulting osseointegration. Clinically, titanium alloy nail interlocking screws may require removal to dynamize a construct or revise the nail due to nonunion, infection, pain, or periprosthetic fracture. This study was designed to determine what variables influence the removal torque for titanium alloy interlocking screws. An intramedullary nail with four interlocking screws was used to stabilize a 1-cm segmental femoral defect in a canine model for 16 weeks. The animals were observed to be active following a several-day recovery after surgery. In six animals, the femora and implanted nail/screws were first tested to failure in torsion to simulate periprosthetic fracture of an implant after which the screws were then removed. In four additional animals, the screws were removed without mechanical testing. Both intraoperative insertional and extraction torques were recorded for all screws. Mechanical testing to failure broke 10/24 screws. On average, the intact screws required 70% of the insertional torque during removal while broken screws only required 16% of the insertional torque (p torque than the outboard distal screw (p torque was ∼80°. The peak axial load did not significantly correlate with the torque required to remove the screws. On average, the removal torque was lower than at the time of insertion, and less torque was required to remove broken screws and screws remote to the fracture. However, broken screws will require additional time to retrieve the remaining screw fragment. This study suggests that broken screws and screws in prematurely active patients will require less torque to remove. © IMechE 2016.

  18. The effect of retained intramedullary nails on tibial bone mineral density.

    Science.gov (United States)

    Allen, J C; Lindsey, R W; Hipp, J A; Gugala, Z; Rianon, N; LeBlanc, A

    2008-07-01

    Intramedullary nailing has become a standard treatment for adult tibial shaft fractures. Retained intramedullary nails have been associated with stress shielding, although their long-term effect on decreasing tibial bone mineral density is currently unclear. The purpose of this study was to determine if retained tibial intramedullary nails decrease tibial mineral density in patients with successfully treated fractures. Patients treated with statically locked intramedullary nails for isolated, unilateral tibia shaft fractures were studied. Inclusion required that fracture had healed radiographically and that the patient returned to the pre-injury activity level. Data on patient demographic, fracture type, surgical technique, implant, and post-operative functional status were tabulated. Dual energy X-ray absorptiometry was used to measure bone mineral density in selected regions of the affected tibia and the contralateral intact tibia. Image reconstruction software was employed to ensure symmetry of the studied regions. Twenty patients (mean age 43; range 22-77 years) were studied at a mean of 29 months (range 5-60 months) following intramedullary nailing. There was statistically significant reduction of mean bone mineral density in tibiae with retained intramedullary nails (1.02 g/cm(2) versus 1.06 g/cm(2); P=0.04). A significantly greater decrease in bone mineral density was detected in the reamed versus non-reamed tibiae (-7% versus +6%, respectively; P<0.05). The present study demonstrates a small, but statistically significant overall bone mineral density decrease in healed tibiae with retained nails. Intramedullary reaming appears to be a factor potentiating the reduction of tibia bone mineral density in long-term nail retention.

  19. [Results of femoral lengthening over an intramedullary nail and external fixator].

    Science.gov (United States)

    Jasiewicz, Barbara; Kacki, Wojciech; Tesiorowski, Maciej; Potaczek, Tomasz

    2008-01-01

    Current techniques of operative limb lengthening usually are based on distraction osteogenesis. One of the techniques is limb lengthening over an intramedullary nail. The goal of this study is to evaluate the results of femoral lengthening over an intramedullary nail. Between 1999 and 200619 femoral "over nail" lengthenings were performed. There were 7 males and 12 females. Mean patients' age at surgery was 15.8 years, and mean initial femoral shortening was 5.1 cm. Operative technique consisted of one-stage implantation of intramedullary nail and external fixator. Ilizarov apparatus was used in 9 patients, monolateral fixator in 10 cases--ORTHOFIX in 9 patients, Wagner fixator--in 1 patient. Intramedullary nail was locked proximally with screws or Schanz pins from external fixator. After distraction phase, external fixator was removed and distal locking screws were applied. Evaluation criteria: obtained lengthening, time of external fixator, treatment time, healing index, external fixation index, range of motion in hip and knee joints and complications according to Paley. The mean lengthening was 4.6 cm, and mean distraction time was 66.6 days. Mean time of external fixation was 115.5 days, and external fixation index was 26.2 days for centimeter. Healing index was 36.9 days for centimeter. In cases with monolateral fixator, healing index did not differ with the whole group. During treatment 18 complications occurred, for a rate of 0.9 complication per segment. Lengthening over an intramedullary nail reduces the time of external fixator. Over nail femoral lengthening can prevent axis deviation following regenerate bending. Complication rate is similar to lengthenings with the classic Ilizarov technique. There are no differences in the treatment time in relation to the type of external fixator.

  20. Is intramedullary nailing applicable for distal tibial fractures with ankle joint extension?

    Science.gov (United States)

    Beytemür, Ozan; Albay, Cem; Adanır, Oktay; Yüksel, Serdar; Güleç, Mehmet Akif

    2016-12-01

    This study aims to evaluate the functional and radiographic results and treatment complications of AO/OTA (Arbeitsgemeinschaft fur Osteosynthesefragen/Orthopaedic Trauma Association) type 43C1 and C2 fractures treated with intramedullary nailing. We retrospectively evaluated 35 AO/OTA type 43C1 and C2 patients (26 males, 9 females; mean age 39.8±16.9 years; range 19 to 82 years) treated with intramedullary nailing. Two interfragmentary screws out of nail were applied in 10 patients (29%), while one interfragmentary screw out of nail was applied in 17 patients (49%). Intramedullary nailing was applied in eight patients (23%) without external screws. Fracture union, union time, alignment problems, and complications were evaluated. Clinical evaluation of patients was conducted using the Olerud and Molander score and by measuring the ankle joint range of motion. Union was achieved in all 35 patients. Mean union time was 16.5±2.8 weeks (range 12 to 24 weeks) and mean Olerud and Molander score was 88±8.24. Varus deformity was detected in one patient, valgus deformity was detected in two patients, and rotation deformity was detected in one patient. Superficial infection was detected in three patients (9%). Deep infection was not detected in any patient. Intramedullary nailing is not contraindicated for simple intra-articular distal tibial fractures. In these fractures, intramedullary nailing performed in accordance with its technique, with an additional percutaneous screw if necessary, is a successful treatment option with high fracture union rates, high functional results, and low complication rates.

  1. Training effect of using Touch Surgery for intramedullary femoral nailing.

    Science.gov (United States)

    Sugand, Kapil; Mawkin, Mala; Gupte, Chinmay

    2016-02-01

    Simulation in orthopaedic training is becoming increasingly popular and has been widely used in formal curricula. However, these resources are expensive and not easily accessible to every trainee. Other means of disseminating surgical education through virtual reality (VR) multimedia can act as useful adjunct to traditional methods of teaching. One validated VR platform is Touch Surgery, a cognitive task simulation and rehearsal app. The primary objective of this study was to identify the training effect of Touch Surgery intramedullary femoral nailing (IFN) modules using objective performance metrics over six consecutive attempts. Secondary objectives consisted of validated multiple choice questions (MCQ) testing before the first (pre) and after the sixth (post) attempts. 27 medical undergraduates were recruited to complete the decision-making process six consecutive times for four modules on the procedural steps of IFN. The modules consisted of (i) preparing the patient and equipment, (ii) femoral canal preparation, (iii) nail insertion and proximal locking, and (iv) distal locking and closure. Real-time objective performance metrics were obtained, stored electronically and analysed using the median and Bonett-Price 95% confidence intervals from the participants' attempts to assess training effect. Significance was calculated using the Mann-Whitney U test for independent data whilst the Wilcoxon signed ranked test was used for paired data. Significance was set as 2-tailed p-value <0.05. Median performance scores per attempt for all four modules demonstrated a significant improvement ranging from 58 to 115%. Scoring variability and distribution was reduced and more predictable per attempt. Logarithmic learning curves elicited strong positive correlations between the number of attempts and scoring. Mean scores for pre and post-study MCQs tests significantly improved from 83 to 94% in all modules. IFN modules on Touch Surgery app demonstrated a significant training

  2. Attritional rupture of extensor pollicis longus: a rare complication following elastic stable intramedullary nailing of a paediatric radial fracture.

    LENUS (Irish Health Repository)

    Sproule, James A

    2011-01-01

    Elastic stable intramedullary nail fixation has become established as an acceptable method of treatment for diaphyseal fractures of both forearm bones in the paediatric population. It is considered safe, minimally invasive and does not compromise physeal growth. We report a case of delayed rupture of extensor pollicis longus due to attrition over the sharp edges of a protruding nail end after elastic stable intramedullary nailing of a paediatric radial diaphyseal fracture.

  3. Screw elastic intramedullary nail for the management of adult forearm fractures

    Directory of Open Access Journals (Sweden)

    Wasudeo Gadegone

    2012-01-01

    Full Text Available Background: The failure of the conventional nailing of both forearm bones or isolated fractures of radius and ulna pose a potential problem of nail migration and rotational instability, despite the best reduction. The purpose of this paper is to evaluate the results of screw elastic intramedullary nail for the treatment of adult diaphyseal fractures of both forearm bones, which effectively addresses the problems associated with the conventional nailing systems for the forearm fractures. Materials and Methods: Seventy-six adults with forearm fractures (radius and ulna or isolated fracture of the single bone were retrospectively evaluated. Fifty males and 26 females with the mean age of 38 years (range, 18-70 years underwent closed reduction and screw intramedullary nail fixation. Ten patients required limited open reduction. The fractures were classified according to the AO/OTA system. The average followup was 12 months (range, 6 to 18 months. Results: The mean surgical time was 45 minutes (35 to 65 minutes. The meantime to union was 14 weeks (10-21 weeks. The results were graded as excellent in 50, good in 18 patients, and acceptable in eight patients, using the criteria of Grace and Eversman. We had superficial infection in three cases, one case of delayed infection, painful bursa in two cases, delayed union in two cases, malunion with dislocation of the DRUJ in two cases, injury to the extensor tendon of the thumb in one case, and one case of incomplete radioulnar synostosis. Conclusion: Closed reduction and internal fixation of forearm fractures by screw intramedullary nails reestablishes the near normal relationship of the fractured fragments. Screw intramedullary nail effectively controls both rotatory forces and the migration of the nail. It produces excellent clinical results in isolated fractures of either bones, as well as both bones of the forearm in adults.

  4. Intramedullary nailing of clavicular midshaft fractures in adults using titanium elastic nail

    Directory of Open Access Journals (Sweden)

    CHEN Qing-yv

    2012-02-01

    Full Text Available 【Abstract】 Objective: Studies showed elastic stable intramedullary nailing (ESIN of displaced midclavicular fractures has excellent outcomes, as well as high complication rates and specific problems. The aim was to discuss ESIN of midshaft clavicular fractures. Methods: Totally 60 eligible patients (aged 18-63 years were randomized to either ESIN group or non-operative group between January 2007 and May 2008. Clavicular shortening was measured after trauma and osseous consolidation. Radiographic union and complications were assessed. Function analysis including Constant shoulder scores and disabilities of the arm, shoulder and hand (DASH scores were performed after a 15-month follow-up. Results: ESIN led to a signifcantly shorter time to union, especially for simple fractures. In ESIN group, all patients got fracture union, of which 5 cases had medial skin irritation and 1 patient needed revision surgery because of implant failure. In the nonoperative group, there were 3 nonunion cases and 2 symptomatic malunions developed requiring corrective osteotomy. At 15 months after intramedullary stabilization, patients in the ESIN group were more satisfied with the appearance of the shoulder and overall outcome, and they benefited a lot from the great improvement of post-traumatic clavicular shortening. Furthermore, DASH scores were lower and Constant scores were significantly higher in contrast to the non-operative group. Conclusion: ESIN is a safe minimally invasive surgical technique with lower complication rate, faster return to daily activities, excellent cosmetic and better functional results, restoration of clavicular length for treating mid-shaft clavicular fractures, resulting in high overall satisfaction, which can be regard as an alternative to plate fixation or nonoperative treatment of mid-shaft clavicular fractures. Key words: Clavicle; Fracture fixation intramedu- llary; Outcome assessment

  5. Intramedullary nailing of clavicular midshaft fractures in adults using titanium elastic nail.

    Science.gov (United States)

    Chen, Qing-Yu; Kou, Dong-Quan; Cheng, Xiao-Jie; Zhang, Wei; Wang, Wei; Lin, Zhang-Qin; Cheng, Shao-Wen; Shen, Yue; Ying, Xiao-Zhou; Peng, Lei; Lv, Chuan-Zhu

    2011-01-01

    Studies showed elastic stable intramedullary nailing (ESIN) of displaced midclavicular fractures has excellent outcomes, as well as high complication rates and specific problems. The aim was to discuss ESIN of midshaft clavicular fractures. Totally 60 eligible patients (aged 18-63 years) were randomized to either ESIN group or non-operative group between January 2007 and May 2008. Clavicular shortening was measured after trauma and osseous consolidation. Radiographic union and complications were assessed. Function analysis including Constant shoulder scores and disabilities of the arm, shoulder and hand (DASH) scores were performed after a 15-month follow-up. ESIN led to a signifcantly shorter time to union, especially for simple fractures. In ESIN group, all patients got fracture union, of which 5 cases had medial skin irritation and 1 patient needed revision surgery because of implant failure. In the nonoperative group, there were 3 nonunion cases and 2 symptomatic malunions developed requiring corrective osteotomy. At 15 months after intramedullary stabilization, patients in the ESIN group were more satisfied with the appearance of the shoulder and overall outcome, and they benefited a lot from the great improvement of post-traumatic clavicular shortening. Furthermore, DASH scores were lower and Constant scores were significantly higher in contrast to the non-operative group. ESIN is a safe minimally invasive surgical technique with lower complication rate, faster return to daily activities, excellent cosmetic and better functional results, restoration of clavicular length for treating mid-shaft clavicular fractures, resulting in high overall satisfaction, which can be regard as an alternative to plate fixation or nonoperative treatment of mid-shaft clavicular fractures.

  6. Local and Widespread Hyperalgesia After Isolated Tibial Shaft Fractures Treated with Intramedullary Nailing

    DEFF Research Database (Denmark)

    Larsen, Peter; Elsøe, Rasmus; Graven-Nielsen, Thomas

    2016-01-01

    OBJECTIVES: Knee pain is accepted as a common complication to intramedullary nailing of tibial fractures. However, no studies have systematically studied the pain sequel following tibial fractures. The objective of this study was to assess pain and hyperalgesia from 6 weeks to 12 months postopera...... fracture treated with intramedullary nailing, although no widespread (extrasegmental) hyperalgesia was detected. Such observations may be important for developing the most adequate rehabilitation procedure following a tibial fracture.......OBJECTIVES: Knee pain is accepted as a common complication to intramedullary nailing of tibial fractures. However, no studies have systematically studied the pain sequel following tibial fractures. The objective of this study was to assess pain and hyperalgesia from 6 weeks to 12 months...... postoperatively after intramedullary nailing of tibial shaft fracture. METHODS: A total of 39 patients were included in this 12-month follow-up study. After 6 weeks, 3, 6, and 12 months postoperatively the pain intensity was measured on a visual analog scale (VAS) and the pressure pain sensitivity was assessed...

  7. Intramedullary nailing appears to be superior in pertrochanteric hip fractures with a detached greater trochanter

    DEFF Research Database (Denmark)

    Palm, Henrik; Lysén, Charlotte; Krasheninnikoff, Michael

    2011-01-01

    In recent years, intramedullary nails (INs) for the treatment of pertrochanteric hip fractures have gained prominence relative to conventional, sliding hip screws (SHSs). There is little empirical background for this development, however. A previous series of ours suggested that the use of SHS wa...

  8. Elastic robust intramedullary nailing for forearm fracture in children

    Directory of Open Access Journals (Sweden)

    Wasem, Jürgen

    2006-01-01

    Full Text Available Background: Forearm fractures are the most common fractures in children (23% of all fractures. Basically there are two treatment options available for diaphyseal forearm fractures in children: closed reduction with cast immobilisation (conservative therapy and the elastic stable intramedullary nailing (ESIN. Treatment decision is influenced by the doctor's estimation of fracture instability. Stable fractures can be treated conservatively whereas instable forearm shaft fractures can be treated according the following three treatment strategies: 1. conservative therapy in an outpatient setting 2. conservative therapy in the operating room in attendance to change to ESIN in case that no stabilisation can be achieved with cast immobilisation 3. immediate treatment with ESIN in the operating room. Objectives: Aim of this Health Technology Assessment (HTA report is to assess and report the published evidence concerning effectiveness and cost-effectiveness of ESIN as a treatment option for diaphyseal forearm fractures in children and to identify future research need. Important parameters for the assessment of effectiveness are objective parameters (axis deviation, losses of motion, and numbers of reductions in case of redislocations and subjective parameters (pain or impairment in quality of life. Furthermore, a health economic evaluation shall be done which refers to the costs of the different therapy strategies. Methods: An extensive, systematic literature search in medical, economic, and HTA literature databases was performed. Relevant data were extracted and synthesised. Results: Three cohort studies and seven case series have been identified. Controlled clinical studies, systematic reviews and/or HTA reports that gave evidence to answer the own study question have not been found. The identified studies partly differed in respect of defined indication for ESIN, study population and treatment strategies. For that reason comparability of results was

  9. [Locked plating with minimally invasive percutaneous plate osteosynthesis versus intramedullary nailing of distal extra-articular tibial fracture: a retrospective study].

    Science.gov (United States)

    Yao, Qi; Ni, Jie; Peng, Li-bin; Yu, Da-xin; Yuan, Xiao-ming

    2013-12-17

    To compare the efficacies of minimally invasive plate osteosynthesis (MIPPO) and interlocking intramedullary nailing (IMN) in the treatment of extra-articular fractures of distal tibia. Retrospective reviews were conducted for 126 patients with extra-articular distal tibia fractures. Treatment was either MIPPO (n = 61) or IMN (n = 65). The outcomes were assessed by comparing operating duration, time to union, the last follow-up American Orthopedic Foot and Ankle Society (AOFAS) score and complication rate. The average follow-up period was 23.7 (12-53) months. In the minimally invasive plate osteosynthesis group, there were deep infections (n = 2), superficial infections (n = 5), delayed union (n = 2), malunion (n = 2) and knee joint pain (n = 10) were observed. In addition, the average operating duration (85.9 ± 18.9 min), average time to union (17.3 ± 3.8 weeks) and average AOFAS (83.2 ± 11.9) were analyzed. In the interlocking intramedullary nailing group, there were delayed union (n = 3), malunion (n = 12) and knee joint pain (n = 22). And the average operating duration (83.3 ± 15.7 min), average time to union (16.5 ± 3.1 weeks) and average AOFAS (84.9 ± 12.0) were analyzed. No statistical significance existed in operating duration, time to union and the last follow-up AOFAS between two groups (P > 0.05). However, the rates of malformation and knee joint pain were higher in the intramedullary nail group than those in the plate group. And the difference was statistically significant (P = 0.015, P = 0.025). Both MIPPO and IMN are effective for extra-articular fractures of distal tibia. However, the former has the advantage of lowers rate of malformation and knee joint pain. Therefore a surgeon should consider the degree of injury while managing extra-articular fracture of distal tibia.

  10. Flexible intramedullary nailing for the treatment of unicameral bone cysts in long bones.

    Science.gov (United States)

    Roposch, A; Saraph, V; Linhart, W E

    2000-10-01

    Unicameral bone cyst is characterized by its tenacity and risk of recurrence. Pathological fracture is common and is often the presenting symptom. The objective of the present study was to evaluate the results of flexible intramedullary nailing for the treatment of a unicameral bone cyst with or without a pathological fracture. Flexible intramedullary nailing for the treatment of a unicameral bone cyst was performed in thirty-two patients. Thirty of these patients presented with a pathological fracture; twenty-four were managed immediately with intramedullary nailing, and the other six had been managed conservatively at other clinics before they were referred to our department. The remaining two cysts were detected incidentally. The cyst was located in the humerus in twenty-one patients, in the femur in nine, and in the radius in two. The mean age of the patients at the time of surgery was 9.8 years, and the mean duration of follow-up was 53.7 months. Radiographic evaluation was performed according to the criteria of Capanna et al., and the cyst was classified as completely healed, healed with residual radiolucency (osteolysis), recurred, or having no response. The healing period ranged from three to 105 months. Fourteen cysts healed completely, and sixteen healed with residual radiolucent areas visible on radiographs. There was recurrence of two cysts that had healed with residual radiolucency. All of the cysts in the present study responded to treatment. A change of nails was necessary in nine patients, as the nails had become too short after bone growth. No major complications were observed. Flexible intramedullary nailing provides early stability, which allows early mobilization and thus obviates the need for a plaster cast and decreases the prevalence of the most common complication: a pathological fracture. This method of treatment also allows for an early return to normal activity.

  11. "Push-past" reaming as a reduction aid with intramedullary nailing of metadiaphyseal and diaphyseal femoral shaft fractures.

    Science.gov (United States)

    Gary, Joshua L; Munz, John W; Burgess, Andrew R

    2014-06-01

    Eccentric reaming of cortical bone near a fracture site can introduce malalignment when an intramedullary nail is placed. The authors describe a technique of reaming metadiaphyseal and diaphyseal femur fractures in which maintaining reduction at the fracture site is not necessary to obtain an excellent alignment of long bone fractures after intramedullary nailing. They have found that central reaming proximal and distal to, but not at, the fracture site allows for excellent reduction of long bone fractures when the intramedullary nail is passed. The reamer is stopped just before the fracture site and then "pushed" across the fracture prior to resumption of reaming. The authors present "push-past" reaming as a technical trick to facilitate reduction of femoral fractures treated with intramedullary nails and a consecutive series of 18 cases in which excellent postoperative alignment was achieved. Copyright 2014, SLACK Incorporated.

  12. Comparative analysis of uniplanar external fixator and retrograde intramedullary nailing for ankle arthrodesis in diabetic Charcot′s neuroarthropathy

    Directory of Open Access Journals (Sweden)

    Nakul S Shah

    2011-01-01

    Results: All five (100% patients treated by intramedullary nailing achieved radiological union on an average follow-up of 16 weeks. The external fixation group had significantly higher rate of complications with one amputation, four non unions (66.7% and a delayed union which went on to full osseous union. Conclusion: The retrograde intramedullary nailing for tibio-talar arthrodesis in Charcot′s neuroarthropathy yielded significantly better outcomes as compared to the use of uniplanar external fixator.

  13. Pre-bent elastic stable intramedullary nail fixation for distal radial shaft fractures in children.

    Science.gov (United States)

    Ge, Yi-hua; Wang, Zhi-gang; Cai, Hai-qing; Yang, Jie; Xu, Yun-lan; Li, Yu-chan; Zhang, Yu-chen; Chen, Bo-chang

    2010-08-01

    To investigate the functional and radiographic outcomes of pre-bent elastic stable intramedullary nail in treatment of distal radial shaft fractures in children. From January 2006 to December 2008, 18 children with distal radial shaft fracture were treated by close reduction and internal fixation with a pre-bent elastic stable intramedullary nail. The age range was from 5 years to 15 years, with an average of 9 years and 8 months. The minimum follow-up was 12 months. All fractures maintained good alignment postoperatively, and 94.4% (17/18) of the patients regained a full range of rotation of the forearm. One patient has limitation of rotation to less than 10°, this had improved by final follow-up. Complications included soft tissue irritation at the site of nail insertion in one patient and transient scar hypersensitivity in another. Fixation with a pre-bent elastic stable intramedullary nail is an effective, safe and convenient method for treating distal radial shaft fractures in children. © 2010 Tianjin Hospital and Blackwell Publishing Asia Pty Ltd.

  14. Paediatric diaphyseal femur fracture treated with intramedullary titanium elastic nail system

    Directory of Open Access Journals (Sweden)

    Shrawan Kumar Thapa

    2015-11-01

    Full Text Available noBackground & Objectives: Over the few years there has been a marked increase in the use of intramedullary fixation in the management of fracture of shaft of femur in children. The goals should be to stabilize the fracture, to control length and alignment, to promote bone healing and to minimize the morbidity and complications for the child. In this prospective study we intend to evaluate the functional and radiological outcome of diaphyseal fracture of shaft of femur treated with elastic intramedullary nail.Materials & Methods: All 56 patients with diaphyseal fracture shaft of femur were treated with titanium elastic nail and followed for period of 32 weeks.Results: The In this study, outcome was assessed by using Flynn’s criteria of titanium flexible nail outcome score and we found excellent result in 49 cases, satisfactory in six cases and poor in one case. We faced one major complication in form of implant failure and six minor complications inform of superficial wound infection.Conclusion: Elastic intramedullary nail used in treatment of diaphyseal fracture shaft of femur yield excellent functional and radiological outcome. It is easy and simple procedure has low rate of complication. It is physeal-protective, cost effective, does not involve heavy instrumentation and can be performed in small set up. It has minimal risk of infection and no risk of injury to the neurovascular structure.JCMS Nepal. 2015; 11(2:20-22

  15. New Technique for Tibiotalar Arthrodesis Using a New Intramedullary Nail Device: A Cadaveric Study

    Directory of Open Access Journals (Sweden)

    Emmanuel D. Eisenstein

    2016-01-01

    Full Text Available Introduction. Ankle arthrodesis is performed in a variety of methods. We propose a new technique for tibiotalar arthrodesis using a newly designed intramedullary nail. Methods. We proposed development of an intramedullary device for ankle arthrodesis which spared the subtalar joint using a sinus tarsi approach. Standard saw bones models and computer assisted modeling and stress analysis were used to develop different nail design geometries and determine the feasibility of insertion. After the final design was constructed, the device was tested on three cadaveric specimens. Results. Four basic nail geometries were developed. The optimal design was composed of two relatively straight segments, each with a different radius of curvature for their respective tibial and talar component. We successfully implemented this design into three cadaveric specimens. Conclusion. Our newly designed tibiotalar nail provides a new technique for isolated tibiotalar fusion. It utilizes the advantages of a tibiotalar calcaneal nail and spares the subtalar joint. This design serves as the foundation for future research to include compression options across the tibiotalar joint and eventual transition to clinical practice.

  16. Intramedullary Mg2Ag nails augment callus formation during fracture healing in mice.

    Science.gov (United States)

    Jähn, Katharina; Saito, Hiroaki; Taipaleenmäki, Hanna; Gasser, Andreas; Hort, Norbert; Feyerabend, Frank; Schlüter, Hartmut; Rueger, Johannes M; Lehmann, Wolfgang; Willumeit-Römer, Regine; Hesse, Eric

    2016-05-01

    Intramedullary stabilization is frequently used to treat long bone fractures. Implants usually remain unless complications arise. Since implant removal can become technically very challenging with the potential to cause further tissue damage, biodegradable materials are emerging as alternative options. Magnesium (Mg)-based biodegradable implants have a controllable degradation rate and good tissue compatibility, which makes them attractive for musculoskeletal research. Here we report for the first time the implantation of intramedullary nails made of an Mg alloy containing 2% silver (Mg2Ag) into intact and fractured femora of mice. Prior in vitro analyses revealed an inhibitory effect of Mg2Ag degradation products on osteoclast differentiation and function with no impair of osteoblast function. In vivo, Mg2Ag implants degraded under non-fracture and fracture conditions within 210days and 133days, respectively. During fracture repair, osteoblast function and subsequent bone formation were enhanced, while osteoclast activity and bone resorption were decreased, leading to an augmented callus formation. We observed a widening of the femoral shaft under steady state and regenerating conditions, which was at least in part due to an uncoupled bone remodeling. However, Mg2Ag implants did not cause any systemic adverse effects. These data suggest that Mg2Ag implants might be promising for intramedullary fixation of long bone fractures, a novel concept that has to be further investigated in future studies. Biodegradable implants are promising alternatives to standard steel or titanium implants to avoid implant removal after fracture healing. We therefore developed an intramedullary nail using a novel biodegradable magnesium-silver-alloy (Mg2Ag) and investigated the in vitro and in vivo effects of the implants on bone remodeling under steady state and fracture healing conditions in mice. Our results demonstrate that intramedullary Mg2Ag nails degrade in vivo over time without

  17. THE RESULT OF INTRAMEDULLARY NAILING WITH BONE GRAFTING OF TIBIA'S PATHOLOGIC FRACTURE

    Directory of Open Access Journals (Sweden)

    V. M. Shapovalov

    2010-01-01

    Full Text Available The authors give the clinical case of successful surgical treatment of patient with tibia's pathologic fracture by intramedullary nailing with bone grafting. The disadvantages of such patients' treatment by plaster immobilization and by some invasive methods like vascular autografting by Ilizarov's method and bone plating were also discussed. The obvious benefits of proposed surgical treatment technique of observed patient category are shown.

  18. Metacarpophalangeal joint of the thumb arthrodesis using intramedullary interlocking screws XMCP™.

    Science.gov (United States)

    Novoa-Parra, C N; Montaner-Alonso, D; Morales-Rodríguez, J

    2017-09-04

    The study objective was to assess the results of a thumb metacarpophalangeal joint (MCPJ) arthrodesis using intramedullary interlocking screws at 25°, XMCP ™ (Extremity Medical, Parsippany, NJ). Radiographs evaluated the angle of arthrodesis, time of fusion and fixation of the implant. Clinical and functional outcomes were assessed using the DASH questionnaire and the VAS scale. Any complications found during surgery or the follow-up period were noted. We studied 9 patients. The mean follow-up was 27.6 months. Patients showed clinical and radiological evidence of fusion in an average of 8 weeks, the angle of fusion was 25°. There were no complications and no implant had to be removed. The XMCP™ system provides a reliable method for MCPJ arthrodesis for several indications and can be used with other procedures in the complex hand. Copyright © 2017 SECOT. Publicado por Elsevier España, S.L.U. All rights reserved.

  19. An evaluation of flexible intramedullary nail fixation in femoral shaft fractures in paediatric age group.

    Science.gov (United States)

    Kumar, Sanjay; Roy, Sandip Kumar; Jha, Amrish Kumar; Chatterjee, Debdutta; Banerjee, Debabrata; Garg, Anant Kumar

    2011-06-01

    Sixty-two femoral shaft fractures in 60 patients treated by elastic intramedullary nailing with mean age of the patients being 9.2 years (range 5 years to 12 years) and average follow-up of 15 months (range 7 months to 60 months) are evaluated. Twenty-eight fractures were fixed with titanium elastic nail while 34 fractures were fixed with Enders nail. There were 40 midshaft fractures, 18 proximal femoral and 4 were fractures of distal third. Fracture patterns were transverse in 35, short oblique in 14 cases and 13 were spiral fractures. Mean age of union in this series was 17 weeks (range 12 weeks to 28 weeks). Ten cases had complications, 5 had nail tip irritation, 3 varus or valgus malalignment and 2 had delayed union. In this series, we did not have any non-union, refracture, limb length discrepancy or any major infection. The result demonstrates 100% union rate irrespective of the age, weight and height of the patient. Regardless of the site of fracture and their pattern, it united every time with elastic nail fixation. We did not find and mismatch in the results of fractures stabilised with titanium elastic nail with that of elastic stainless steel nail.

  20. [Intramedullary nailing combined with cannulated screw in treating femoral condyles fractures].

    Science.gov (United States)

    Shen, Guo-Qing; Zhang, Hao; Long, Da-Fu; Li, Zheng-Wen; Tan, Ying-Dong

    2017-07-25

    To observe the clinical effects of retrograde intramedullary nailing and cannulated screws in the treatment of femoral condylar fracture. From June 2009 to June 2015, 13 patients with femoral condyles fracture were treated by retrograde intramedullary nailing and cannulated screws including 6 males and 7 females with an average age of 46.1 years old ranging from 16 to 76 years old. There were 10 cases of closed fractures, 3 cases of open fraetures. According to AO classification criteriam, 4 cases were type C1, 7 cases were type C2, 2 cases were type C3. Postoperative reduction of fracture and the knee joint function recovery were observed. All patients were followed up for 12 to 36 months with a mean of 24 months. X-ray examination showed that the union time of fracture was 18 to 24 weeks, 21 weeks on average. There were no cases of loosening, breakage of internal fixators and re-fracture. Hospital for Special Surgery(HSS) knee score was 90.07±4.99 at 1 year after the operation. The clinical efficacy for retrograde intramedullary nailing and cannulated screw for the treatment of femoral condyles fracture was excellent. It can improve the anatomical reattachment rate and reduce the complications and promote the knee functional recovery.

  1. Incidence of Avascular Necrosis of the Femoral Head After Intramedullary Nailing of Femoral Shaft Fractures

    Science.gov (United States)

    Kim, Ji Wan; Oh, Jong-Keon; Byun, Young-Soo; Shon, Oog-Jin; Park, Jai Hyung; Oh, Hyoung Keun; Shon, Hyun Chul; Park, Ki Chul; Kim, Jung Jae; Lim, Seung-Jae

    2016-01-01

    Abstract The goal of this study was to determine the incidence of avascular necrosis of the femoral head (AVNFH) after intramedullary nailing of femoral shaft fractures and to identify risk factors for developing AVNFH. We retrospectively reviewed all patients with femoral shaft fractures treated with antegrade intramedullary nailing at 10 institutions. Among the 703 patients enrolled, 161 patients were excluded leaving 542 patients in the study. Average age was 42.1 years with average follow-up of 26.3 months. Patient characteristics and fracture patterns as well as entry point of femoral nails were identified and the incidence of AVNFH was investigated. Patients were divided into 2 groups according to open versus closed physis, open versus closed fractures, and age (<20 versus ≥20 years). Overall incidence of AVNFH was 0.2% (1 of 542): the patient was 15-year-old boy. Of 25 patients with open physis, the incidence of AVNFH was 4%, whereas none of 517 patients with closed physis developed AVNFH (P < 0.001). The incidence of AVNFH in patients aged < 20 versus ≥20 years was 1.1% (1 of 93) and 0.0% (0 of 449), respectively (P = 0.172), which meant that the incidence of AVNFH was 0% in adult with femur shaft fracture. Of 61 patients with open fractures, the incidence of AVNFH was 0%. The number of cases with entry point at the trochanteric fossa or tip of the greater trochanter (GT) was 324 and 218, respectively, and the incidence of AVNFH was 0.3% and 0.0%, respectively (P = 0.412). In patients aged ≥20 years with isolated femoral shaft fracture, there was no case of AVNFH following antegrade intramedullary nailing regardless of the entry point. Therefore, our findings suggest that the risk of AVNFH following antegrade femoral nailing is extremely low in adult patients. PMID:26844518

  2. The stability of a hip fracture determines the fatigue of an intramedullary nail.

    Science.gov (United States)

    Eberle, S; Bauer, C; Gerber, C; von Oldenburg, G; Augat, P

    2010-01-01

    The purpose of this study was to address the question of how the stability of a proximal hip fracture determines the fatigue and failure mechanism of an intramedullary implant. To answer this question, mechanical experiments and finite element simulations with two different loading scenarios were conducted. The two load scenarios differed in the mechanical support of the fracture by an artificial bone sleeve, representing the femoral head and neck. The experiments confirmed that an intramedullary nail fails at a lower load in an unstable fracture situation in the proximal femur than in a stable fracture. The nails with an unstable support failed at a load 28 per cent lower than the nails with a stable support by the femoral neck. Hence, the mechanical support of a fracture is crucial to the fatigue failure of an implant. The simulation showed why the fatigue fracture of the nail starts at the aperture of the lag screw. It is the location of the highest von Mises stress, which is the failure criterion for ductile materials.

  3. The impact of antegrade intramedullary nailing start site using the SIGN nail in proximal femoral fractures: A prospective cohort study.

    Science.gov (United States)

    Mustafa Diab, Mohamed; Wu, Hao-Hua; Eliezer, Edmund; Haonga, Billy; Morshed, Saam; Shearer, David W

    2018-02-01

    In many low and middle-income countries (LMICs) SIGN nail is commonly used for antegrade femoral intramedullary (IM) nailing, using a start site either at the tip of the greater trochanter or piriformis fossa. While a correct start site is considered an essential technical step; few studies have evaluated the impact of using an erroneous start site. This is particularly relevant in settings with limited access to fluoroscopy to aid in creating a nail entry point. The purpose of this study was to evaluate the impact of antegrade SIGN IM nailing start site on radiographic alignment and health-related quality of life. In this prospective cohort study, adult patients with proximal femur fractures (OTA 32, subtrochanteric zone) treated with antegrade IM SIGN nail at Muhimbili Orthopaedic Institute (MOI), Dar es Salaam, Tanzania were enrolled. Start site was determined on the immediate postoperative X-ray and was graded on a continuous scale based on distance of the IM nail center from the greater trochanteric tip. The primary outcome measurement was coronal alignment on the post-operative x-ray. The secondary outcomes were reoperation rates, RUST scores and EQ5D scores at one year follow-up. Seventy-nine patients were enrolled. 50 of them (63.3%) had complete data at 1year and were included in the final data analysis. Of the fifty patients, nine (18%) had IM nails placed laterally, 26 (52%) medially and 15 (30%) directly over the tip of the greater trochanter. Compared to a start site at the tip or medial to the greater trochanter, a lateral start site was 9 times more likely to result in a varus malalignment (95% CI: 1.42-57.70, p=0.021). Lateral start site was associated with varus malalignment. Although lateral start site was not significantly associated with reoperation, varus deformity was associated with higher reoperation rates. Surgeons should consider avoiding a start site lateral to the tip of the greater trochanter or allow the nail to rotate to avoid

  4. Chlorhexidine-releasing implant coating on intramedullary nail reduces infection in a rat model

    Directory of Open Access Journals (Sweden)

    SM Shiels

    2018-03-01

    Full Text Available The use of internal intramedullary nails for long bone fracture fixation is a common practice among surgeons. Bacteria naturally attach to these devices, increasing the risk for wound infection, which can result in non- or malunion, additional surgical procedures and extended hospital stays. Intramedullary nail surface properties can be modified to reduce bacterial colonisation and potentially infectious complications. In the current study, a coating combining a non-fouling property with leaching chlorhexidine for orthopaedic implantation was tested. Coating stability and chlorhexidine release were evaluated in vitro. Using a rat model of intramedullary fixation and infection, the effect of the coating on microbial colonisation and fracture healing was evaluated in vivo by quantitative microbiology, micro-computed tomography, plain radiography, three-point bending and/or histology. Low dose systemic cefazolin was administered to increase the similarities to clinical practice, without overshadowing the effect of the anti-infective coating. When introduced into a contaminated wound, the non-fouling chlorhexidine-coated implant reduced the overall bacteria colonisation within the bone and on the implant, reduced the osteolysis and increased the radiographic union, confirming its potential for reducing complications in wounds at high risk of infection. However, when implanted into a sterile wound, non-union increased. Further studies are required to best optimise the anti-microbial effectiveness, while not sacrificing fracture union.

  5. Closed retrograde retrieval of the distal broken segment of femoral cannulated intramedullary nail using a ball-tipped guide wire.

    Science.gov (United States)

    Metikala, Sreenivasulu; Mohammed, Riazuddin

    2011-07-01

    Extracting broken segments of intramedullay nails from long bones can be an operative challenge, particularly from the distal end. We report a case series where a simple and reproducible technique of extracting broken femoral cannulated nails using a ball-tipped guide wire is described. This closed technique involves no additional equipment or instruments. Eight patients who underwent the described method were included in the study. The technique involves using a standard plain guide wire passed through the cannulated distal broken nail segment after extraction of the proximal nail fragment. The plain guide wire is then advanced distally into the knee joint carefully under fluoroscopy imaging. Over this wire, a 5-millimeter (mm) cannulated large drill bit is used to create a track up to the distal broken nail segment. Through the small knee wound, a ball-tipped guide wire is passed, smooth end first, till the ball engages the end of the nail. The guide wire is then extracted along with the broken nail through the proximal wound. The method was successfully used in all eight patients for removal of broken cannulated intramedullary nail from the femoral canal without any complications. All patients underwent exchange nailing with successful bone union in six months. None of the patients had any problems at the knee joint at the final follow-up. We report a technique for successful extraction of the distal fragment of broken femoral intramedullary nails without additional surgical approaches.

  6. Occurrence of secondary fracture around intramedullary nails used for trochanteric hip fractures: a systematic review of 13,568 patients.

    Science.gov (United States)

    Norris, Rory; Bhattacharjee, Dhritiman; Parker, Martyn J

    2012-06-01

    A sliding hip screw (SHS) is currently the treatment of choice for trochanteric hip fractures, largely due to the low incidence of complications. An alternative treatment is the use of intramedullary proximal femoral nails. Unfortunately these implants have been associated with a risk of later fracture around the implant. The aim of this study was to see if any improvements have been made to the current intramedullary nails, to reduce the incidence of secondary fracture around the distal tip of the nail. We analysed data related to 13,568 patients from 89 studies, focusing on the incidence of post operative secondary femoral shaft fracture following the use of intramedullary nails in the fixation of trochanteric hip fractures. The overall reported incidence of secondary fracture around the nail was 1.7%. The incidence of fracture has reduced in the 3rd generation Gamma nails when compared to the older Gamma nail (1.7% versus 2.6%, p value 0.03). However, the incidence of secondary fracture in the 3rd generation Gamma nails is still significantly higher than the other brands of short nail (1.7% versus 0.7%, p value 0.0005). Long nails had a slight tendency towards a lower risk of fracture although the difference was not statistically significant (1.1% versus 1.7%, p value 0.28). There was a significantly lower risk of fracture for those nails with a biaxial fixation as opposed to uniaxial fixation (0.6% versus 1.9%, p value fracture around a proximal femoral nail is one of the most significant of fracture healing complications, and this study suggests that continuing design changes to this method of fixation has reduced the risk of this complication occurring. Copyright © 2011 Elsevier Ltd. All rights reserved.

  7. Semiextended approach for intramedullary nailing via a patellar eversion technique for tibial-shaft fractures: Evaluation of the patellofemoral joint.

    Science.gov (United States)

    Yasuda, Tomohiro; Obara, Shu; Hayashi, Junji; Arai, Masayuki; Sato, Kaoru

    2017-06-01

    Intramedullary nail fixation is a common treatment for tibial-shaft fractures, and it offers a better functional prognosis than other conservative treatments. Currently, the primary approach employed during intramedullary nail insertion is the semiextended position is the suprapatellar approach, which involves a vertical incision of the quadriceps tendon Damage to the patellofemoral joint cartilage has been highlighted as a drawback associated with this approach. To avoid this issue, we perform surgery using the patellar eversion technique and a soft sleeve. This method allows the articular surface to be monitored during intramedullary nail insertion. We arthroscopically assessed the effect of this technique on patellofemoral joint cartilage. The patellar eversion technique allows a direct view and protection of the patellofemoral joint without affecting the patella. Thus, damage to the patellofemoral joint cartilage can be avoided. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Intramedullary nailing for the treatment of aseptic femoral shaft non-unions after plating failure: effectiveness and timing.

    Science.gov (United States)

    Megas, Panagiotis; Syggelos, Spyros A; Kontakis, Georgios; Giannakopoulos, Andreas; Skouteris, Georgios; Lambiris, Elias; Panagiotopoulos, Elias

    2009-07-01

    This retrospective, multicentre study aimed to evaluate reamed intramedullary nailing (IMN) for the treatment of 30 cases of aseptic femoral shaft non-union after plating failure. Following nailing, 29 non-unions had healed by a mean 7.93 months. In one case a hypertrophic non-union required renailing after 8 months, using a nail of greater diameter, and united within five further months. Healing times were not related to whether the fracture was open or closed, the type non-union or the type of fracture. The delay from the initial plating to intramedullary nailing had a statistically significant effect on healing time and final outcome. This treatment is cost effective and should be implemented as soon as the non-union is diagnosed.

  9. Femoral shaft fractures in children: elastic stable intramedullary nailing in 31 cases

    DEFF Research Database (Denmark)

    Houshian, Shirzad; Gøthgen, Charlotte Buch; Pedersen, Niels Wisbech

    2004-01-01

    We report our experience with elastic stable intramedullary titanium nailing (ESIN) of femoral shaft fractures in children. From 1998 to 2001, we treated 31 children (20 boys), median age 6 (4-11) years, with ESIN for 29 closed and 2 grade I open femoral shaft fractures. We reviewed 30 children...... clinically after median 1.5 (1-3) years. Their median hospital stay was 6 (2-20) days. All fractures were radiographically united at a median of 7 (5-9) weeks. The nails were removed in 29 children after a median of 22 (6-38) weeks postoperatively. At follow-up, we found a leg-length discrepancy up to 1 cm...

  10. Early Conversion of External Fixation to Interlocked Nailing in Open Fractures of Both Bone Leg Assisted with Vacuum Closure (VAC) - Final Outcome.

    Science.gov (United States)

    Gill, Simrat Pal Singh; Raj, Manish; Kumar, Sunil; Singh, Pulkesh; Kumar, Dinesh; Singh, Jasveer; Deep, Akash

    2016-02-01

    Management of compound grade III fractures of both bone leg includes external stabilization for long period, followed by various soft tissue coverage procedures. Primary interlocking of tibia had been also done with variable results. External fixation for long time without any bone loss often leads to infected nonunion, loss of reduction, pin tract infection and failure of fixation, primary interlocking in compound grade III fractures had shown high medullary infection rate. We managed all cases of compound grade III A/B fractures with primary external fixation, simultaneous wound management using vacuum assisted closure (VAC) followed by early conversion to interlocking within 2 weeks of fixator application. To determine the effectiveness of vacuum assisted closure (VAC) for the early conversion of external fixator to definitive interlocking in open fractures of the both bone leg. In current study we selected 84 cases of compound grade IIIA/B diaphyseal fractures of both bone leg during period of May 2010 to September 2013. We managed these cases by immediate debridement and application of external fixation followed by repeated debridement, application of vacuum assisted closure (VAC) and conversion to interlocking within two weeks. Out of 84 cases union was achieved in 80(95%) of cases with definitive tibial interlocking. Excellent to good result were obtained in 77(91.8%) of cases and fair to poor result seen in rest of 7(8.2%) of cases according to modified Ketenjian's criteria. 5 out of these 7 poor result group cases were from Compound Grade III B group to start with. Deep infection rate in our series were 7% i.e. total 6 cases and 4 out of these were from compound Grade III B group to start with. Vacuum assisted closure (VAC) give a good help for rapid closure of the wound and help in early conversion to definitive intramedullary nailing. Reamed nail could well be used in compound grade IIIA/B fractures without increasing the risk of infection. It gives

  11. Open grade III fractures of femoral shaft: Outcome after early reamed intramedullary nailing.

    Science.gov (United States)

    Singh, D; Garg, R; Bassi, J L; Tripathi, S K

    2011-09-01

    Open grade III fractures of femur are a challenging therapeutic problem as most of them are associated with multiple trauma. Method used for skeletal stabilization of these fractures should limit further soft tissue damage, bacterial spread and morbidity in addition to its ease of application, providing mechanical support and restoring normal alignment. Forty-six patients with open grade III fractures of femoral shaft were included in the study. There were 10 grade IIIA, 34 grade IIIB and two grade IIIC fractures that were treated with early reamed intramedullary nailing with adequate management of soft tissue. Patients were reviewed retrospectively. Mean time of union was 27 weeks. Infection rate was 4% and non-union rate was 9%. There were two cases (4%) with limb shortening. No case of angular or rotational deformity was noted. Early reamed intramedullary nailing for open grade III fractures of femoral shaft, after giving due respect to the soft tissue injury, gives satisfactory results with proper alignment, good range of motion, short rehabilitation period and low infection rate. Level IV. Retrospective therapeutic study. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

  12. Complications and functional recovery in treatment of femoral shaft fractures with unreamed intramedullary nailing.

    Science.gov (United States)

    Sadic, Sahmir; Custovic, Svemir; Smajic, Nedim; Fazlic, Mirsad; Vujadinovic, Aleksandar; Hrustic, Asmir; Jasarevic, Mahir

    2014-01-01

    Fracture of the femoral shaft is a common fracture encountered in orthopedic practice. In the 1939, Küntscher introduced the concept of intramedullary nailing for stabilization of long bone fractures. Intramedullary nailing has revolutionized the treatment of fractures. The study included 37 male patients and 13 female patients, averaged 39 +/- 20.5 years (range, 16 to 76 years). There were 31 left femurs and 21 right femurs fractured. 46 fractures were the result of blunt trauma. Low energy trauma was the cause of fractures in six patients, of which five in elderly females. 49 fractures were closed. Healing time given in weeks was 19.36 +/- 6.1. The overall healing rate was 93.6%. There were three (6.25%) major complications nonunion. There were one (2%) delayed union, one (2%) rotational malunion and no infection. The shortening of 1 cm were in two patients. Antercurvatum of 10 degrees was found in one patient. There was no statistically significant reduction of a motion in the hip and knee (p knee extensors) muscle weakness (p fractures.

  13. The clinical application of absorbable intramedullary nail and claw plate on treating multiple rib fractures.

    Science.gov (United States)

    Chai, X; Lin, Q; Ruan, Z; Zheng, J; Zhou, J; Zhang, J

    2013-08-01

    The absorption intramedullary nail and claw plate indications and efficacy were investigated in the treatment of a life-threatening multiple rib fractures. A retrospective analysis of 248 surgically treated rib fracture patients was performed who admitted to our hospital from March 2007 to December 2012. Intramedullary nailing was performed in 28 cases, a claw-type bone plate was fixed in 141 cases, and a combination of both was fixed in 79 cases. All internal fixation patients were clinically cured except 1 patient died 14 days after a massive pulmonary embolism. The patients with flail chest and floating chest wall causing respiratory and circulatory disorders were promptly corrected. Routine follow-up was from 1 to 2 years, displaced fractures were in 2 cases, and there were 11 cases of internal fixation and extraction. Internal fixation is a simple and reliable method for the treatment of multiple rib fractures. Both internal fixation materials have their pros and cons but the claw bone plate is more robust. The actual selection of appropriate treatment options helps to improve the treatment efficacy.

  14. Elastic intramedullary nailing and DBM-Bone marrow injection for the treatment of simple bone cysts

    Science.gov (United States)

    Kanellopoulos, Anastasios D; Mavrogenis, Andreas F; Papagelopoulos, Panayiotis J; Soucacos, Panayotis N

    2007-01-01

    Background Simple or unicameral bone cysts are common benign fluid-filled lesions usually located at the long bones of children before skeletal maturity. Methods We performed demineralized bone matrix and iliac crest bone marrow injection combined with elastic intramedullary nailing for the treatment of simple bone cysts in long bones of 9 children with a mean age of 12.6 years (range, 4 to 15 years). Results Two of the 9 patients presented with a pathological fracture. Three patients had been referred after the failure of previous treatments. Four patients had large lesions with impending pathological fractures that interfered with daily living activities. We employed a ratio to ascertain the severity of the lesion. The extent of the lesion on the longitudinal axis was divided with the normal expected diameter of the long bone at the site of the lesion. The mean follow-up was 77 months (range, 5 to 8 years). All patients were pain free and had full range of motion of the adjacent joints at 6 weeks postoperatively. Review radiographs showed that all 7 cysts had consolidated completely (Neer stage I) and 2 cysts had consolidated partially (Neer stage II). Until the latest examination there was no evidence of fracture or re-fracture. Conclusion Elastic intramedullary nailing has the twofold benefits of continuous cyst decompression, and early immediate stability to the involved bone segment, which permits early mobilization and return to the normal activities of the pre-teen patients. PMID:17916249

  15. Elastic intramedullary nailing and DBM-Bone marrow injection for the treatment of simple bone cysts

    Directory of Open Access Journals (Sweden)

    Papagelopoulos Panayiotis J

    2007-10-01

    Full Text Available Abstract Background Simple or unicameral bone cysts are common benign fluid-filled lesions usually located at the long bones of children before skeletal maturity. Methods We performed demineralized bone matrix and iliac crest bone marrow injection combined with elastic intramedullary nailing for the treatment of simple bone cysts in long bones of 9 children with a mean age of 12.6 years (range, 4 to 15 years. Results Two of the 9 patients presented with a pathological fracture. Three patients had been referred after the failure of previous treatments. Four patients had large lesions with impending pathological fractures that interfered with daily living activities. We employed a ratio to ascertain the severity of the lesion. The extent of the lesion on the longitudinal axis was divided with the normal expected diameter of the long bone at the site of the lesion. The mean follow-up was 77 months (range, 5 to 8 years. All patients were pain free and had full range of motion of the adjacent joints at 6 weeks postoperatively. Review radiographs showed that all 7 cysts had consolidated completely (Neer stage I and 2 cysts had consolidated partially (Neer stage II. Until the latest examination there was no evidence of fracture or re-fracture. Conclusion Elastic intramedullary nailing has the twofold benefits of continuous cyst decompression, and early immediate stability to the involved bone segment, which permits early mobilization and return to the normal activities of the pre-teen patients.

  16. Continuous decompression with intramedullary nailing for the treatment of unicameral bone cysts.

    Science.gov (United States)

    Masquijo, Julio Javier; Baroni, Eduardo; Miscione, Horacio

    2008-08-01

    To evaluate the efficacy of decompression of unicameral bone cysts (UBCs) of the long bones with intramedullary nailing and to compare responses to treatment according to location. We evaluated 48 consecutive patients treated between January 1988 and June 2000. Mean age was 10.3 years. Mean follow-up was 9.8 years. Evaluation was performed according to the radiographic criteria of Capanna. UBCs were located in the proximal humerus (n = 24), humeral shaft (n = 2), proximal femur (n = 19), distal tibia (n = 2) and fibula (n = 1). A total of 62.5% presented a pathological fracture. Successful results were observed in 89.5% (26 total healing, 17 healing with residual radiolucent areas), and there were four recurrences and, in one case, no response to treatment. There was more healing in the humerus than in the femur (92.3% versus 84.2%), and more tendency to restitution ad integrum, although the difference was not statistically significant (P = 0.1499). Intramedullary nailing is a minimally invasive method, which permits early stability and decompresses the cyst allowing healing. Significant differences were not observed among results from different locations.

  17. Nonunion of the humerus following intramedullary nailing treated by Ilizarov hybrid fixation.

    Science.gov (United States)

    Raschke, M; Khodadadyan, C; Maitino, P D; Hoffmann, R; Südkamp, N P

    1998-02-01

    A case of a posttraumatic humeral shaft nonunion, after intramedullary stabilization with a Seidel nail, is presented. Severe osteoporosis, an oligotrophic nonunion, subclinical infection, and adhesive capsulitis of the glenohumeral joint were present. Due to the subclinical infection and severe osteoporosis, other major invasive therapeutic options such as intramedullary nailing or compression plating and bone grafting were not applicable. Nonoperative treatment was also not indicated secondary to the pain and disability present. External fixation with the Ilizarov hybrid fixator seemed to offer a minimally invasive treatment modality without the need of additional bone grafting. After fourteen weeks of "callus massage," consisting of closed alternating compression and distraction with an Ilizarov hybrid fixator, osseous consolidation was achieved. Eight months after Ilizarov treatment the patient had returned to work as a mechanic. At the one-year follow-up examination, the patient presented pain free and with near normal shoulder and elbow motion, with stable osseous consolidation of the humerus. In some cases of nonunion of the humerus shaft, when standard treatment options are not recommended, external fixation with an Ilizarov hybrid fixator may offer a salvage procedure with a successful clinical outcome.

  18. Treatment for Trochanteric Fracture of the Femur with Short Femoral Nail: A Comparison between the Asian Intramedullary Hip Screw (IMHS) and the Conventional IMHS.

    Science.gov (United States)

    Kawaji, Hidemi; Uematsu, Takuya; Oba, Ryosuke; Satake, Yoshihiko; Hoshikawa, Naoya; Takai, Shinro

    2016-01-01

    We usually use short femoral nails for the treatment of trochanteric fracture of the femur. In this retrospective study, we investigated and compared the clinical results of the conventional intramedullary hip screw (IMHS) and the Asian IMHS, which is a redesigned version of the former. The subjects were 42 patients; 21 treated with the Asian IMHS and 21 were treated with the conventional IMHS. From the clinical records, we retrospectively investigated the patients' age, sex, in-hospital waiting period for operation, operating time, intraoperative blood loss, walking ability before fracture and at discharge, and complication pertaining to the operation. The 21 patients (4 men and 17 women) receiving the Asian IMHS and the 21 patients (5 men and 16 women) receiving the conventional IMHS did not differ significantly in mean age, sex ratio, preoperative waiting period, mean postoperative hospital stay, mean operation time, or mean intraoperative blood loss. Among patients receiving the Asian IMHS, the complications of intraoperative fractures of the femur developed in 3 patients and breakage of the implant occurred in 1 patient. No complications occurred in patients receiving the conventional IMHS. Compared with the conventional IMHS, the Asian IMHS is smaller, has increased variations in the shaft/neck angle of the lag screw, and has a titanium-alloy construction, allowing magnetic resonance imaging. The intraoperative fracture may have occurred because of the configuration of the distal interlocking screw in the Asian IMHS. Breakage of the implant likely occurred because the nail was too small in diameter, and too short in length for the unstable AO 31-A3 fracture. If careful attention is paid to the configuration of its distal interlocking screw intraoperatively and a nail of appropriate size is selected, the Asian IMHS is better suited than the conventional IMHS for treating Japanese patients, who generally have a small physique, because of its many variations in

  19. [True/Flex intramedullary nailing for forearm shaft fractures. Long-term results].

    Science.gov (United States)

    Trlica, J; Počepcov, I; Kočí, J; Frank, M; Holeček, T; Dědek, T

    2012-01-01

    Presentation of technical experience and the clinical and functional results of intramedullary fixation of forearm shaft fractures. Between January 1994 and December 2009, a total of 96 patients with 144 radial and/or ulnar fractures (ulna, 33; radius,15; both, 48) were treated by nailing (True/Flex®). According to the AO classification there were 22-A, 22-B and 22-C type fractures in 39 (41%), 44 (46%) and 13 (13%).cases, respectively. Of these, 82 (85%) were closed (types: 0, 48; I, 33; II, 1) and 14 (15%) were open (types: I, 13; II, 1; III, 0) fractures. Seventy-eight patients (81%) were followed up and their functional outcomes were evaluated according to the criteria of Anderson et al. The average interval between the operation and final follow-up was 28 months (15 to 96 months) The average time to surgery was 2.2 days (0 to 25 days). Early complications were recorded in 4% of the patients (1x bursitis olecrani; 1x end cup replacement; 1x bending of nails) and late complications in 15% (5x non-union; 2x delay union; 4x bursitis olecrani; 1x ruptured tendon). Bone healing was achieved in 95% of the cases and took on average 16 weeks (7 to 34 weeks). No infection, refracture or synostosis occurred. Primary loss of reduction was recorded in four cases due to distraction in one, bent nails in two and a wrong size of the implant in one; secondary loss of reduction was found in three cases, with two cases of radius shortening and one 10°malrotation. No primary malrotation was recorded, but secondary loss of alignment was seen in the distal part of the radius and the proximal part of the ulna. Functional results according to the Anderson criteria were excellent and good in 87% of the cases. Intramedullary mailing provides good stability to mid- and distal-third shaft fractures of the ulna and mid- and proximalthird shaft fractures of the radius, particularly in AO type A and type B fractures. The technical aspects of the method are analysed in detail in this paper

  20. Comparison of suprapatellar and infrapatellar intramedullary nailing for tibial shaft fractures: a systematic review and meta-analysis.

    Science.gov (United States)

    Yang, Liqing; Sun, Yuefeng; Li, Ge

    2018-06-14

    Optimal surgical approach for tibial shaft fractures remains controversial. We perform a meta-analysis from randomized controlled trials (RCTs) to compare the clinical efficacy and prognosis between infrapatellar and suprapatellar intramedullary nail in the treatment of tibial shaft fractures. PubMed, OVID, Embase, ScienceDirect, and Web of Science were searched up to December 2017 for comparative RCTs involving infrapatellar and suprapatellar intramedullary nail in the treatment of tibial shaft fractures. Primary outcomes were blood loss, visual analog scale (VAS) score, range of motion, Lysholm knee scores, and fluoroscopy times. Secondary outcomes were length of hospital stay and postoperative complications. We assessed statistical heterogeneity for each outcome with the use of a standard χ 2 test and the I 2 statistic. The meta-analysis was undertaken using Stata 14.0. Four RCTs involving 293 participants were included in our study. The present meta-analysis indicated that there were significant differences between infrapatellar and suprapatellar intramedullary nail regarding the total blood loss, VAS scores, Lysholm knee scores, and fluoroscopy times. Suprapatellar intramedullary nailing could significantly reduce total blood loss, postoperative knee pain, and fluoroscopy times compared to infrapatellar approach. Additionally, it was associated with an improved Lysholm knee scores. High-quality RCTs were still required for further investigation.

  1. Plate Versus Intramedullary Nail Fixation of Anterior Tibial Stress Fractures: A Biomechanical Study.

    Science.gov (United States)

    Markolf, Keith L; Cheung, Edward; Joshi, Nirav B; Boguszewski, Daniel V; Petrigliano, Frank A; McAllister, David R

    2016-06-01

    Anterior midtibial stress fractures are an important clinical problem for patients engaged in high-intensity military activities or athletic training activities. When nonoperative treatment has failed, intramedullary (IM) nail and plate fixation are 2 surgical options used to arrest the progression of a fatigue fracture and allow bone healing. A plate will be more effective than an IM nail in preventing the opening of a simulated anterior midtibial stress fracture from tibial bending. Controlled laboratory study. Fresh-frozen human tibias were loaded by applying a pure bending moment in the sagittal plane. Thin transverse saw cuts, 50% and 75% of the depth of the anterior tibial cortex, were created at the midtibia to simulate a fatigue fracture. An extensometer spanning the defect was used to measure the fracture opening displacement (FOD) before and after the application of IM nail and plate fixation constructs. IM nails were tested without locking screws, with a proximal screw only, and with proximal and distal screws. Plates were tested with unlocked bicortical screws (standard compression plate) and locked bicortical screws; both plate constructs were tested with the plate edge placed 1 mm from the anterior tibial crest (anterior location) and 5 mm posterior to the crest. For the 75% saw cut depth, the mean FOD values for all IM nail constructs were 13% to 17% less than those for the saw cut alone; the use of locking screws had no significant effect on the FOD. The mean FOD values for all plate constructs were significantly less than those for all IM nail constructs. The mean FOD values for all plates were 28% to 46% less than those for the saw cut alone. Anterior plate placement significantly decreased mean FOD values for both compression and locked plate constructs, but the mean percentage reductions for locked and unlocked plates were not significantly different from each other for either plate placement. The percentage FOD reductions for all plate

  2. Removal of a Broken Cannulated Intramedullary Nail: Review of the Literature and a Case Report of a New Technique

    Directory of Open Access Journals (Sweden)

    Amr A. Abdelgawad

    2013-01-01

    Full Text Available Nonunion of long bones fixed with nails may result in implant failure. Removal of a broken intramedullary nail may be a real challenge. Many methods have been described to allow for removal of the broken piece of the nail. In this paper, we are reviewing the different techniques to extract a broken nail, classifying them into different subsets, and describing a new technique that we used to remove a broken tibial nail with narrow canal. Eight different categories of implant removal methods were described, with different methods within each category. This classification is very comprehensive and was never described before. We described a new technique (hook captured in the medulla by flexible nail introduced from the locking hole which is a valuable technique in cases of nail of a small diameter where other methods cannot be used because of the narrow canal of the nail. Our eight categories for broken nail removal methods simplify the concepts of nail removal and allow the surgeon to better plan for the removal procedure.

  3. Minimally invasive treatment of trochanteric fractures with intramedullary nails. Technique and results.

    Science.gov (United States)

    Todor, Adrian; Pojar, Adina; Lucaciu, Dan

    2013-01-01

    The aim of the study was to evaluate the results of minimally invasive treatment of trochanteric fractures with the use of intramedullary nails. From September 2010 to September 2012 we treated 21 patients with pertrochanteric fractures by a minimally invasive technique using the Gamma 3 (Stryker, Howmedica) nail. There were 13 females and 8 men with a mean age of 74.1 years, ranging from 58 to 88 years. Fractures were classified as being stable (AO type 31-A1) in 5 cases and unstable (AO type 31-A2 and A3) in the rest of 16 cases. Patients were reviewed at 6 weeks and 3 months postoperatively. Mean surgery time was 46.8 minutes and mean hospital stay was 14.9 days. No patients required blood transfusions. During the hospital stay all the patients were mobilized with weight bearing as tolerated. All patients were available for review at 6 weeks, and 2 were lost to the 3 months follow up. 16 patients regained the previous level of activity. This minimally invasive technique using a gamma nail device for pertrochanteric fractures gives reliable good results with excellent preservation of hip function.

  4. The treatment of infected nonunion of the tibia following intramedullary nailing by the Ilizarov method.

    Science.gov (United States)

    Megas, Panagiotis; Saridis, Alkis; Kouzelis, Antonis; Kallivokas, Alkiviadis; Mylonas, Spyros; Tyllianakis, Minos

    2010-03-01

    The purpose of this study was to demonstrate the effectiveness of the Ilizarov method and circular external fixator in order to eradicate the infection and restore bone union, limb anatomy and functionality in cases with infected nonunion of the tibia following intramedullary nailing. During 7 years nine patients suffering from infected nonunion of the tibia after intramedullary nailing were treated in our department. The series comprised seven men and two women with an average age of 39.7 years (range 21-75 years). The patients had previously undergone an average of 4.8 operations (range 3-6 operations). Active purulent bone infection occurred in all nine patients. Bone defect was present in all patients with a mean size of 5 cm (range 2-12 cm). In three cases with bone defect less than 2 cm, monofocal compression osteosynthesis technique was used. In the rest cases where bone defect exceeded 2 cm, bifocal consecutive distraction-compression osteosynthesis technique was applied. Three patients required a local gastrocnemius flap. The mean follow-up period was 26.6 months (range 13-42 months). Results were evaluated using Paley's functional and radiological scoring system. Bone union was achieved in all nine patients without recurrence of infection during the follow-up period. Bone results were graded as excellent in five cases and good in the rest four cases. Functional results were graded as excellent in three cases, good in four and fare in two cases. Mean external fixation time was 187.4 days (range 89-412 days) and mean lengthening index was 32 days/cm (range 27-39 days/cm). Complications observed included eight grade II pin tract infections, axial deformity at the lengthening site in two cases and at the nonunion site in another two cases. Ankle joint stiffness was detected in five cases. The Ilizarov method may be an effective method in infected nonunions of the tibia following intramedullary nailing. Copyright 2009 Elsevier Ltd. All rights reserved.

  5. Complications of close interlock nailing in the management of close tibial fracture

    International Nuclear Information System (INIS)

    Saeed, M.; Inam, M.; Khan, I.; Satar, A.; Arif, M.

    2015-01-01

    Objective: The objective of this study is to find out the frequency of complications of locally made interlock nailing in tibia after nine months of surgery. Material and Method:. This case series study was done from March 2004 to February 14 in the Department of Orthopedic and Trauma Postgraduate Medical Institute Hayatabad Medical Complex Peshawar. A total of 58 adults ( after the closure of epiphysis) patients were randomly selected provided that they have; Close diaphysial fracture of tibia which is located 7 cm below the knee joint and 4 cm above the ankle joint and fracture less than one week old. Results: Total numbers of patients were 58. Anterior Knee pain was observed in 14(24.1%), delayed union in 10(17.2%), external of 100 rotation in 4(6.9%) and internal rotation of 50 in 1(1.7%), non union in 4(6.9%), intramedullay infection in 3(5.2%), shortening of 1 centimeter (cm) in 2(3.4), 2 cm in 1(1.7%) and 1.5 cm in 3(5.2%) cases, distal screw broken in 2(3.4%), proximal screw broken in 1(1.7%), Nail broken in 2(3.4), infection at proximal screw in 2(3.4%) and at distal screw was 2(3.4%), Restriction of knee flexion in 1(1.7%), Restricted ankle movements in 1(1.7%), varus angulation of 100 in 1(1.7%), valgus angulation of 100 in 1(1.7%), Ankle pain in 1(1.7%) and deep vein thrombosis in 1(1.7%). Conclusion: interlocking nail is considered to be the gold standard for management of tibial fracture but it is not free of complication especially knee pain and angular rotation. (author)

  6. Ipsilateral proximal femur and shaft fractures treated with hip screws and a reamed retrograde intramedullary nail.

    Science.gov (United States)

    Ostrum, Robert F; Tornetta, Paul; Watson, J Tracy; Christiano, Anthony; Vafek, Emily

    2014-09-01

    Although not common, proximal femoral fractures associated with ipsilateral shaft fractures present a difficult management problem. A variety of surgical options have been employed with varying results. We investigated the use of hip screws and a reamed retrograde intramedullary (IM) nail for the treatment of this combined fracture pattern in terms of postoperative alignment (malunion), nonunion, and complications. Between May 2002 and October 2011, a total of 95 proximal femoral fractures with associated shaft fractures were treated at three participating Level 1 trauma centers; all were treated with hip screw fixation (cannulated screws or sliding hip screws) and retrograde reamed IM nails. The medical records of these patients were reviewed retrospectively for alignment, malunion, nonunion, and complications. Followup was available on 92 of 95 (97%) of the patients treated with hip screws and a retrograde nail. Forty were treated with a sliding hip screw, and 52 were treated with cannulated screws. There were five proximal malunions in this series (5%). The union rate was 98% (90 of 92) for the femoral neck fractures and 91.3% (84 of 92) for the femoral shaft fractures after the initial surgery. There were two nonunions of comminuted femoral neck fractures after cannulated screw fixation. There was no difference in femoral neck union or alignment when comparing cannulated screws to a sliding hip screw. Four open comminuted femoral shaft fractures went on to nonunion and required secondary surgery to obtain union, and one patient developed symptomatic avascular necrosis. The treatment of ipsilateral proximal femoral neck and shaft fractures with hip screw fixation and a reamed retrograde nail demonstrated a high likelihood of union for the femoral neck fractures and a low risk of malunion. Comminution and initial displacement of the proximal femoral fracture may still lead to a small incidence of malunion or nonunion, and open comminuted femoral shaft fractures

  7. Robust identification and localization of intramedullary nail holes for distal locking using CBCT: a simulation study.

    Science.gov (United States)

    Kamarianakis, Z; Buliev, I; Pallikarakis, N

    2011-05-01

    Closed intramedullary nailing is a common technique for treatment of femur and tibia fractures. The most challenging step in this procedure is the precise placement of the lateral screws that stabilize the fragmented bone. The present work concerns the development and the evaluation of a method to accurately identify in the 3D space the axes of the nail hole canals. A limited number of projection images are acquired around the leg with the help of a C-arm. On two of them, the locking hole entries are interactively selected and a rough localization of the hole axes is performed. Perpendicularly to one of them, cone-beam computed tomography (CBCT) reconstructions are produced. The accurate identification and localization of the hole axes are done by an identification of the centers of the nail holes on the tomograms and a further 3D linear regression through principal component analysis (PCA). Various feature-based approaches (RANSAC, least-square fitting, Hough transform) have been compared for best matching the contours and the centers of the holes on the tomograms. The robustness of the suggested method was investigated using simulations. Programming is done in Matlab and C++. Results obtained on synthetic data confirm very good localization accuracy - mean translational error of 0.14 mm (std=0.08 mm) and mean angular error of 0.84° (std=0.35°) at no radiation excess. Successful localization can be further used to guide a surgeon or a robot for correct drilling the bone along the nail openings. Copyright © 2010 IPEM. Published by Elsevier Ltd. All rights reserved.

  8. Rotational Mal-Alignment after Reamed Intramedullary Nailing for tibial shaft fracture.

    Science.gov (United States)

    Khan, Sher Baz; Mohib, Yasir; Rashid, Rizwan Haroon; Rashid, Haroonur

    2016-10-01

    Intra-medullary (IM) nailing is standard of care for unstable tibial shaft fractures. Malrotation is very common but it is under-recognised, inpart because of variation in normal anatomy and partly due to difficulty in accurately assessing rotation. This study was planned to evaluate the frequency of rotational mal-alignment after reamed tibia IMnailing. This cross-sectional study was conducted at Aga khan University Hospital, Karachi, and comprised patients with tibia shaft fractures managed with IMnailing from January to December 2014. All the patients were assessed intra-operatively for rotational alignment using the knee and ankle fluoroscopic images. There were 81 patients with a mean age of 38±16.9 years. There were 64(79%) male patients. Overall the incidence of malrotation was in 20(24.7%) cases. Rotational mal-alignment is one of the preventable complications after IMnailing which can be assesed intra-operatively under fluoroscope.

  9. A patient specific finite element simulation of intramedullary nailing to predict the displacement of the distal locking hole.

    Science.gov (United States)

    Mortazavi, Javad; Farahmand, Farzam; Behzadipour, Saeed; Yeganeh, Ali; Aghighi, Mohammad

    2018-05-01

    Distal locking is a challenging subtask of intramedullary nailing fracture fixation due to the nail deformation that makes the proximally mounted targeting systems ineffective. A patient specific finite element model was developed, based on the QCT data of a cadaveric femur, to predict the position of the distal hole of the nail postoperatively. The mechanical interactions of femur and nail (of two sizes) during nail insertion was simulated using ABAQUS in two steps of dynamic pushing and static equilibrium, for the intact and distally fractured bone. Experiments were also performed on the same specimen to validate the simulation results. A good agreement was found between the model predictions and the experimental observations. There was a three-point contact pattern between the nail and medullary canal, only on the proximal fragment of the fractured bone. The nail deflection was much larger in the sagittal plane and increased for the larger diameter nail, as well as for more distally fractured or intact femur. The altered position of the distal hole was predicted by the model with an acceptable error (mean: 0.95; max: 1.5 mm, in different tests) to be used as the compensatory information for fine tuning of proximally mounted targeting systems. Copyright © 2018 IPEM. Published by Elsevier Ltd. All rights reserved.

  10. A novel smart navigation system for intramedullary nailing in orthopedic surgery.

    Directory of Open Access Journals (Sweden)

    Jaesuk Choi

    Full Text Available This paper proposes a novel smart surgical navigation system for intramedullary nailing in orthopedic surgery. Using a handle-integrated laser guidance module, the system can target a drill insertion point onto skin, indicating an accurate target position to perpendicularly access an invisible distal hole. The proposed handle-integration-based fixation of the laser guidance module precisely defines the relative position of the module with respect to the distal hole. Consequently, unlike conventional systems, the proposed system can indicate the target insertion point without any help from bulky and costly external position-tracking equipment that is usually required for compensating disturbances generated by external impacts. After insertion, a correct drilling direction toward the distal hole is guided by real-time drilling angle measurement modules-one integrated with the nail handle and the other with the drill body. Each module contains a 9-axis inertial sensor and a Bluetooth communication device. These two modules work together to provide real-time drilling angle data, allowing calculation of the directional error toward the center of the distal hole in real time. The proposed system removes the need for fluoroscopy and provides a compact and cost-effective solution compared with conventional systems.

  11. Reamed intramedullary exchange nailing in the operative treatment of aseptic tibial shaft nonunion.

    Science.gov (United States)

    Hierholzer, Christian; Friederichs, Jan; Glowalla, Claudio; Woltmann, Alexander; Bühren, Volker; von Rüden, Christian

    2017-08-01

    The aim of this study was to evaluate a standardized treatment protocol regarding the rate of secondary bone union, complications, and functional outcome. This study was started as a prospective study in a single Level I Trauma Centre between 2003 and 2012. The study group consisted of 188 patients with the diagnosis of an aseptic tibial shaft nonunion. Exchange nailing was performed following a standardized surgical protocol. Long-term follow-up was analyzed for rate of bone healing and functional outcome. Osseous healing was achieved in 182 out of 188 patients (97 %). In 165 out of 188 patients (88 %), bone healing was observed timely and uneventfully after a single exchange nailing procedure. An open approach was necessary in 32 patients (17 %). Twenty-three patients (12 %) required additional therapy such as extracorporeal shock wave therapy. Post-operative complications were observed in seven patients (4 %). Almost all patients demonstrated osseous healing within 12 months, with the majority of osseous healing occurring within six months. A relevant shortening of the fractured tibia was observed in 20 out of 188 patients (11 %). After a median follow-up of 23 months (range 12-45 months), outcome was evaluated using the assessment system of Friedman/Wyman. In summary, 154 out of 188 patients (82 %) had a good functional long-term result. Reamed intramedullary exchange nailing including correction of axis alignment is a safe and effective treatment of aseptic tibial shaft nonunion with a high rate of bone healing and a good radiological and functional long-term outcome.

  12. Heterotopic ossification of the elbow after closed reduction and retrograde intramedullary nailing for radial neck fracture treated by anconeus interposition.

    Science.gov (United States)

    Sreenivas, T; Menon, Jagdish; Nataraj, A R

    2013-12-01

    Heterotopic ossification around the elbow can lead to considerable functional disability. We describe a case of a 42-year-old man who developed heterotopic ossification of his elbow after closed reduction of the elbow dislocation and radial neck fracture and retrograde intramedullary nailing for radial neck fracture. During the follow-up after initial surgery, movements of the elbow were gradually deteriorated and diagnosed as heterotopic ossification of the elbow. Implant removal, radial head excision along with heterotopic mass, and also interposition of the anconeus muscle resulted in improvement of his elbow mobility. At 18 months of follow-up, patient had elbow flexion arc of 15°-110°, 70° of supination, and 50° of pronation without recurrence of heterotopic ossification. The uniqueness of this case lies in the treatment of heterotopic ossification of the elbow to prevent its recurrence, which was developed after retrograde intramedullary nailing for radial neck fracture following closed reduction.

  13. Intramedullary nailing of proximal and distal one-third tibial shaft fractures with intraoperative two-pin external fixation.

    Science.gov (United States)

    Wysocki, Robert W; Kapotas, James S; Virkus, Walter W

    2009-04-01

    Fractures of the proximal and distal one thirds of the tibial shaft have historically higher malunion rates than those of the midshaft. This retrospective case series evaluates the postoperative radiographic outcome of intramedullary nailing of proximal and distal one-third tibial shaft fractures using intraoperative two-pin external fixation, often referred to as traveling traction. Between 2000 and 2005, 15 consecutive patients with proximal third and 27 consecutive patients with distal third displaced extra-articular fractures of the tibia were treated with statically locked intramedullary nailing and supplementary intraoperative two-pin rectangular frame external fixation. The external fixation was removed once the proximal and distal locking screws were in place. The alignment of the fractures was determined using standard postoperative anteroposterior and lateral radiographs. Postoperatively, 14 of 15 patients with proximal fractures and 25 of 27 patients with distal fractures had less than 5 degrees of angular deformity in both the coronal and sagittal planes and less than 1 cm shortening. Statically locked intramedullary nailing with simultaneous intraoperative traveling traction external fixation as treatment for proximal and distal one-third extra-articular tibial shaft fractures is successful in achieving a high rate of acceptable postoperative alignment.

  14. A prospective, randomised trial comparing closed intramedullary nailing with percutaneous plating in the treatment of distal metaphyseal fractures of the tibia.

    Science.gov (United States)

    Guo, J J; Tang, N; Yang, H L; Tang, T S

    2010-07-01

    We compared the outcome of closed intramedullary nailing with minimally invasive plate osteosynthesis using a percutaneous locked compression plate in patients with a distal metaphyseal fracture in a prospective study. A total of 85 patients were randomised to operative stabilisation either by a closed intramedullary nail (44) or by minimally invasive osteosynthesis with a compression plate (41). Pre-operative variables included the patients' age and the side and pattern of the fracture. Peri-operative variables were the operating time and the radiation time. Postoperative variables were wound problems, the time to union of the fracture, the functional American Orthopaedic Foot and Ankle surgery score and removal of hardware. We found no significant difference in the pre-operative variables or in the time to union in the two groups. However, the mean radiation time and operating time were significantly longer in the locked compression plate group (3.0 vs 2.12 minutes, p fractures had united. Patients who had intramedullary nailing had a higher mean pain score (40 = no pain, 0 = severe pain), [corrected] but better function, alignment and total American Orthopaedic Foot and Ankle surgery scores, although the differences were not statistically significant (p = 0.234, p = 0.157, p = 0.897, p = 0.177 respectively). Three (6.8%) patients in the intramedullary nailing group and six (14.6%) in the locked compression plate group showed delayed wound healing, and 37 (84.1%) in the former group and 38 (92.7%) in the latter group expressed a wish to have the implant removed. We conclude that both closed intramedullary nailing and a percutaneous locked compression plate can be used safely to treat Orthopaedic Trauma Association type-43A distal metaphyseal fractures of the tibia. However, closed intramedullary nailing has the advantage of a shorter operating and radiation time and easier removal of the implant. We therefore prefer closed intramedullary nailing for patients with

  15. Comparison and analysis of reoperations in two different treatment protocols for trochanteric hip fractures - postoperative technical complications with dynamic hip screw, intramedullary nail and Medoff sliding plate.

    Science.gov (United States)

    Paulsson, Johnny; Stig, Josefine Corin; Olsson, Ola

    2017-08-24

    In treatment of unstable trochanteric fractures dynamic hip screw and Medoff sliding plate devices are designed to allow secondary fracture impaction, whereas intramedullary nails aim to maintain fracture alignment. Different treatment protocols are used by two similar Swedish regional emergency care hospitals. Dynamic hip screw is used for fractures considered as stable within the respective treatment protocol, whereas one treatment protocol (Medoff sliding plate/dynamic hip screw) uses biaxial Medoff sliding plate for unstable pertrochanteric fractures and uniaxial Medoff sliding plate for subtrochanteric fractures, the second (intramedullary nail/dynamic hip screw) uses intramedullary nail for subtrochanteric fractures and for pertrochanteric fractures with intertrochanteric comminution or subtrochanteric extension. All orthopedic surgeries are registered in a regional database. All consecutive trochanteric fracture operations during 2011-2012 (n = 856) and subsequent technical reoperations (n = 40) were derived from the database. Reoperations were analysed and classified into the categories adjustment (percutaneous removal of the locking screw of the Medoff sliding plate or the intramedullary nail, followed by fracture healing) or minor, intermediate (reosteosynthesis) or major (hip joint replacement, Girdlestone or persistent nonunion) technical complications. The relative risk of intermediate or major technical complications was 4.2 (1.2-14) times higher in unstable pertrochanteric fractures and 4.6 (1.1-19) times higher in subtrochanteric fractures with treatment protocol: intramedullary nail/dynamic hip screw, compared to treatment protocol: Medoff sliding plate/dynamic hip screw. Overall rates of intermediate and major technical complications in unstable pertrochanteric and subtrochanteric fractures were with biaxial Medoff sliding plate 0.68%, with uniaxial Medoff sliding plate 1.4%, with dynamic hip screw 3.4% and with intramedullary nail 7.2%. The

  16. Quality of life after antegrade intramedullary nail fixation of humeral fractures: a survey in a selected cohort of Brazilian patients.

    Science.gov (United States)

    Cocco, Luiz Fernando; Ejnisman, Benno; Belangero, Paulo Santoro; Cohen, Moises; Dos Reis, Fernando Baldy

    2018-01-01

    The treatment of humeral fractures remains controversial. Systematic reviews demonstrate similar results between dynamic compression plating and locked intramedullary nailing in the surgical treatment of these fractures. However, it appears that antegrade intramedullary nailing causes higher residual pain in the shoulder. The proposal of this work is to evaluate through the WORC protocol (Western Ontario Rotator Cuff Index) the consequences in the quality of life of patients submitted to osteosynthesis of the humerus with antegrade locked intramedullary nailing. This work is a cohort retrospective study in addition to the application of a questionnaire for self-rated quality of life with its 05 domains (WORC - Western Ontario Rotator Cuff Index) for patients ( N  = 26) classified in the Trauma Sector of the Department of Orthopedics and Traumatology of the Federal University of São Paulo (DOT/UNIFESP) submitted to Humerus Osteosynthesis with Antegrade Locked Intramedullary Nailing. There was also the inclusion of data related to the time since surgery, age, sex, surgical laterality, dominance among members and work leave, which were not considered in the original protocol. After, the data were statistically assessed to evaluate the association between numerical and categorical variables. The overall WORC score was 82.75 ± 17.00 (Mean ± SD) and was not different considering sex, age and postoperative period. Among the WORC domains, both Work and Sport / Recreation Protocols were the most unfavorable factors in the evaluation of patients. Although not statistically significant, those who had the procedure on the dominant side presented a lower quality of life score than those who had the surgery on the non-dominant side. Although non-significant again, those who were away from work had an overall lower quality of life score than those who were not. The WORC Quality of Life Protocol shows good results for evaluating patients submitted to humerus

  17. Biomechanical assessment of composite versus metallic intramedullary nailing system in femoral shaft fractures: A finite element study.

    Science.gov (United States)

    Samiezadeh, Saeid; Tavakkoli Avval, Pouria; Fawaz, Zouheir; Bougherara, Habiba

    2014-08-01

    Intramedullary nails are the primary choice for treating long bone fractures. However, complications following nail surgery including non-union, delayed union, and fracture of the bone or the implant still exist. Reducing nail stiffness while still maintaining sufficient stability seems to be the ideal solution to overcome the abovementioned complications. In this study, a new hybrid concept for nails made of carbon fibers/flax/epoxy was developed in order to reduce stress shielding. The mechanical performance of this new implant in terms of fracture stability and load sharing was assessed using a comprehensive non-linear FE model. This model considers several mechanical factors in nine fracture configurations at immediately post-operative, and in the healed bone stages. Post-operative results showed that the hybrid composite nail increases the average normal force at the fracture site by 319.23N (P<0.05), and the mean stress in the vicinity of fracture by 2.11MPa (P<0.05) at 45% gait cycle, while only 0.33mm and 0.39mm (P<0.05) increases in the fracture opening and the fragments' shear movement were observed. The healed bone results revealed that implantation of the titanium nail caused 20.2% reduction in bone stiffness, while the composite nail lowered the stiffness by 11.8% as compared to an intact femur. Our results suggest that the composite nail can provide a preferred mechanical environment for healing, particularly in transverse shaft fractures. This may help bioengineers better understand the biomechanics of fracture healing, and aid in the design of effective implants. Copyright © 2014. Published by Elsevier Ltd.

  18. [The monorail system--bone segment transport over unreamed interlocking nails].

    Science.gov (United States)

    Oedekoven, G; Jansen, D; Raschke, M; Claudi, B F

    1996-11-01

    A treatment protocol is demonstrated, consisting of an osteotomy, either proximal or distal, of the bone defect with subsequent segmental transport via an anteromedially (tibia) or laterally (femur) mounted AO external fixation over an unreamed interlocking nail (monorail system). Twenty patients were treated by this method with indications as follows: 13 had a segmental bone defect of the tibia, 3 of the femur. Three patients showed post-traumatic and postinfectious leg-length discrepancies and one was treated for hypertrophic non-union of the femur. Defect distance varied between 5 and 18.5 cm and average time for transport was 19,42 days/ cm for the tibial shaft, 15,93 days/cm for the femur. Two patients developed deep infection, which required change of treatment, removing the monorail system and application of an Ilizarov apparatus. Despite complications using the monorail system, all patients healed and no amputations were required. The monorail system can be used as an alternative to the Ilizarov method under certain criteria of patient selection; these criteria are shown by an algorithm for segmental bone defects without infection, respecting the soft-tissue status with or without neurovascular compromise.

  19. Percutaneous clamping of spiral and oblique fractures of the tibial shaft: a safe and effective reduction aid during intramedullary nailing.

    Science.gov (United States)

    Collinge, Cory A; Beltran, Michael J; Dollahite, Henry A; Huber, Florian G

    2015-06-01

    The reduction of tibial shaft fractures during intramedullary nailing is important if limb alignment is to be restored and successful clinical outcomes are expected. We have used a percutaneously applied (or open) clamp or clamps to achieve and maintain reduction during nailing of all amendable tibial shaft fractures. In this article, we describe the technique and preliminary results comparing closed, simple spiral and oblique tibial shaft fractures (OTA 42-A1 and A2) managed with percutaneous clamp-assisted nailing (CAN) versus nailing using manual reduction (MRN) held by the surgical team. In the MRN group, there were an increased fracture gap (P = 0.04) and trends toward malalignment (P = 0.07) and healing time (P = 0.06) compared with the CAN group. There were also trends in clinical; no wound complications occurred in either group. We have found that percutaneous CAN of closed, simple spiral and oblique tibial shaft fractures seems safe and allows for early predictable union with reproducible alignment compared with nailing using MRN.

  20. Outcome of surgical implant generation network nail initiative in ...

    African Journals Online (AJOL)

    in Uganda, was propagated in to Kenya mainly in resource poor hospitals, and has changed long bone fractures' management and outcomes. The goal of this study was to describe applicability of the SIGN initiative in fracture care in a Kenyan hospital. AbstrAct. Background: Closed interlocked intra-medullary nailing (IM), ...

  1. Comparative Study Using Intramedullary K-wire Fixation Over Titanium Elastic Nail in Paediatric Shaft Femur Fractures.

    Science.gov (United States)

    Kumar, Sanjiv; Anand, Tushar; Singh, Sudhir

    2014-11-01

    Fracture shaft femur is common paediatric trauma leading to significant morbidity. Conservative treatments available are associated with prolonged periods of immobilization. Use of flexible intramedullary implant allows early rehabilitation in diaphyseal fractures of femur in children. The aim of the present study is to compare fixation of diaphyseal femur fracture by titanium elastic nail and intramedullary K-wires in children. Prospective randomized study in a tertiary care hospital. Fifty-two children between 6 years and 14 years of age with femoral shaft fracture were assigned either in Group I or Group II based on computer generated random numbers. In Group I closed percutaneous intramedullary K- wire fixation and in Group II closed percutaneous intramedullary titanium elastic nail was used to fix the fractures. Partial weight bearing was allowed after 6 weeks of surgery and full weight bearing at clinico-radiological union. Average time of radiological union was 6 to 10 weeks in both groups. In both the groups two cases had entry site irritation which resolved with early implant removal. One case in both the groups had unacceptable mal-alignment. Both the groups had few cases of limb-length discrepancy, which was in acceptable limit, except two cases of TENS. There was no statistically significant difference between the results of both the groups. But, using K-wires significantly reduced the cost of treatment. Most of such fractures in our society are neglected because of high cost of treatment. Providing a cheaper alternative in form of K-wires may be beneficial for the patients from low socio-economic status.

  2. Incidence of infection after early intramedullary nailing of open tibial shaft fractures stabilized with pinless external fixators

    Directory of Open Access Journals (Sweden)

    Kulshrestha Vikas

    2008-01-01

    Full Text Available Background: A major drawback of conventional fixator system is the penetration of fixator pins into the medullary canal. The pins create a direct link between the medullary cavity and outer environment, leading to higher infection rates on conversion to intramedullary nailing. This disadvantage is overcome by the AO pinless fixator, in which the trocar points are clamped onto the outer cortex without penetrating it. This study was designed to evaluate the role of AO pinless fixators in primary stabilization of open diaphyseal tibial fractures that received staged treatment because of delayed presentation or poor general condition. We also analyzed the rate of infection on early conversion to intramedullary nail. Materials and Methods: This study is a retrospective review of 30 open diaphyseal fractures of tibia, which were managed with primary stabilization with pinless fixator and early exchange nailing. Outcome was evaluated in terms of fracture union and rate of residual infection. The data were compared with that available in the literature. Results: All the cases were followed up for a period of 2 years. The study includes Gustilo type 1 (n=10, 14 Gustilo type 2 (n=14, and type3 (n=6 cases. 6 cases (20% had clamp site infection, 2 cases (6.7% had deep infection, and in 28 cases (93% the fracture healed and consolidated well. Conclusion: This study has highlighted the valuable role of pinless external fixator in the management of open tibial fractures in terms of safety and ease of application as well as the advantage of early conversion to intramedullary implant without the risk of deep infection.

  3. Median Nerve Palsy following Elastic Stable Intramedullary Nailing of a Monteggia Fracture: An Unusual Case and Review of the Literature

    Directory of Open Access Journals (Sweden)

    Surjit Lidder

    2011-01-01

    Full Text Available Monteggia fractures are rare in children, and subtle radial head dislocations, with minor plastic deformation of the ulna, may be missed in up to a third of cases. Complications of Monteggia fractures-dislocations include persistent radial head dislocation, forearm deformity, elbow stiffness, and nerve palsies at the time of presentation. An unusual case of median nerve palsy following elastic stable intramedullary nailing of a type I Monteggia lesion in a 6-year-old girl is presented, and we highlight that, although most nerve palsies associated with a Monteggia fracture-dislocations are treated expectantly in children, early intervention here probably provided the best outcome.

  4. Modification of elastic stable intramedullary nailing with a 3rd nail in a femoral spiral fracture model - results of biomechanical testing and a prospective clinical study.

    Science.gov (United States)

    Kaiser, Martin M; Stratmann, Christine; Zachert, Gregor; Schulze-Hessing, Maaike; Gros, Nina; Eggert, Rebecca; Rapp, Marion

    2014-01-08

    Elastic stable intramedullary nailing (ESIN) is the standard treatment for displaced diaphyseal femoral fractures in children. However, high complication rates (10-50%) are reported in complex fractures. This biomechanical study compares the stiffness with a 3rd nail implanted to that in the classical 2C-shaped configuration and presents the application into clinical practice. For each of the 3 configurations of ESIN-osteosynthesis with titanium nails eight composite femoral grafts (Sawbones®) with an identical spiral fracture were used: 2C configuration (2C-shaped nails, 2 × 3.5 mm), 3CM configuration (3rd nail from medial) and 3CL configuration (3rd nail from lateral). Each group underwent biomechanical testing in 4-point bending, internal/external rotation and axial compression. 2C and 3CM configurations showed no significant differences in this spiroid type fracture model. 3CL had a significantly higher stiffness during anterior-posterior bending, internal rotation and 9° compression than 2C, and was stiffer in the lateral-medial direction than 3CM. The 3CL was less stable during p-a bending and external rotation than both the others. As biomechanical testing showed a higher stability for the 3CL configuration in two (a-p corresponding to recurvation and 9° compression to shortening) of three directions associated with the most important clinical problems, we added a 3rd nail in ESIN-osteosynthesis for femoral fractures. 11 boys and 6 girls (2.5-15 years) were treated with modified ESIN of whom 12 were '3CL'; due to the individual character of the fractures 4 patients were treated with '3CM' (third nail from medial) and as an exception 1 adolescent with 4 nails and one boy with plate osteosynthesis. No additional stabilizations or re-operations were necessary. All patients achieved full points in the Harris-Score at follow-up; no limb length discrepancy occurred. The 3CL configuration provided a significantly higher stiffness than 2C and 3CM configurations

  5. Rotational malalignment after closed intramedullary nailing of femoral shaft fractures and its influence on daily life.

    Science.gov (United States)

    Karaman, Ozgur; Ayhan, Egemen; Kesmezacar, Hayrettin; Seker, Ali; Unlu, Mehmet Can; Aydingoz, Onder

    2014-10-01

    Any intraoperative rotational malalignment during intramedullary nailing (IMN) of femoral shaft fractures will become permanent. We hypothesized that rotational malalignment of the femur and its compensatory biomechanics may induce problems in the hip, knee, patellofemoral and ankle joints. We purposed to clarify the influence of a femoral rotational malalignment of ≥10° on daily activities. Twenty-four femoral shaft fracture patients treated with closed antegrade IMN were included. At last follow-up, to reveal any rotational malalignment, computerized tomography (CT) scans of both femurs (injured and uninjured sides) were examined. The patient groups with or without CT-detected true rotational malalignment ≥10° were compared with respect to the activity scores. Ten of the 24 patients (41.7%) had a CT-detected true rotational malalignment of ≥10° compared with the unaffected side. The AOFAS scores were 100.00 for all of the patients. LKS, WOMAC knee, and WOMAC hip scores were significantly decreased in the patients with rotational malalignment compared to those without. Patients without rotational malalignment tolerated climbing stairs significantly better than those with rotational malalignment. Patients who could not tolerate climbing stairs were consistently complaining of anterior knee pain. A femoral rotational malalignment of ≥10° is symptomatic for the patients, and the hip, knee, and patellofemoral joints were affected. Because of the possibly altered joint loadings and biomechanics, these could render patients prone to degenerative joint disease. In addition, due to the high rates of rotational malalignment after femoral shaft fracture and consequent malpractice claims, it is important for surgeons to be more aware of rotational alignment during surgery.

  6. Additional Tension Screws Improve Stability in Elastic Stable Intramedullary Nailing: Biomechanical Analysis of a Femur Spiral Fracture Model.

    Science.gov (United States)

    Zachert, Gregor; Rapp, Marion; Eggert, Rebecca; Schulze-Hessing, Maaike; Gros, Nina; Stratmann, Christina; Wendlandt, Robert; Kaiser, Martin M

    2015-08-01

    For pediatric femoral shaft fractures, elastic stable intramedullary nailing (ESIN) is an accepted method of treatment. But problems regarding stability with shortening or axial deviation are well known in complex fracture types and heavier children. Biomechanical in vitro testing was performed to determine whether two modified osteosyntheses with an additional tension screw fixation or screw fixation alone without nails could significantly improve the stability in comparison to classical ESIN. A total of 24 synthetic adolescent-sized femoral bone models (Sawbones, 4th generation; Vashon, Washington, United States) with an identical spiral fracture (length 100 mm) were used. All grafts underwent retrograde fixation with two C-shaped steel nails (2C). Of the 24, 8 osteosyntheses were supported by one additional tension screw (2C1S) and another 8 by two screws (2S) in which the intramedullary nails were removed before testing. Each configuration underwent biomechanical testing in 4-point bending, external rotation (ER) and internal rotation (IR). Furthermore, the modifications were tested in axial physiological 9 degrees position for shifting and dynamic compression as well as dynamic load. Both screw configurations (2C1S and 2S) demonstrated a significantly higher stability in comparison to the 2C configuration in 4-point bending (anterior-posterior, 0.95 Nm/mm [2C] spiral fracture model, the stability of ESIN could be significantly improved by two modifications with additional tension screws. If transferred in clinical practice, these modifications might offer earlier weight bearing and less problems of shortening or axial deviation. Georg Thieme Verlag KG Stuttgart · New York.

  7. A new mini-invasive technique in treating pediatric diaphyseal forearm fractures by bioabsorbable elastic stable intramedullary nailing: a preliminary technical report.

    Science.gov (United States)

    Sinikumpu, J-J; Keränen, J; Haltia, A-M; Serlo, W; Merikanto, J

    2013-01-01

    Operative treatment is often indicated in unstable pediatric diaphyseal forearm fractures. Recently minimally invasive reduction and elastic stable intramedullary nailing have been of increasing interest, instead of open reduction and internal fixation with plates. There are several disadvantages of metallic intramedullary implants, such as soft-tissue irritation and a risk of disturbing later imaging. Thus, they are generally removed in later operations. We aimed to develop a new technique to stabilize pediatric forearm fractures by the bioabsorbable intramedullary nailing. We developed a new, two-stage mini-invasive surgical technique to stabilize the unstable diaphyseal fractures in children. The procedure is bioabsorbable elastic stable intramedullary nailing. Ultra-high-strength bioabsorbable intramedullary nails of poly(lactide-co-glycolide) were manufactured for our purpose. The material has been widely proven to be biocompatible and stable enough for fracture treatment as screws and pins. We have used the new technique in the unstable both-bone diaphyseal forearm fractures in children between the ages of 5 and 15 years. We report the technique and our clinical experience in the series of those three cases that have been followed up for at least 12 months. The present series has been randomized for the procedure instead for titanium elastic stable intramedullary nailing, and the series represents a part of ongoing randomized trial. The reported cases operated by the new technique referred good union in the fractured bones and acceptable alignment in the follow-up. Removal of the implants was not required. No troubles with the procedure or implant per se were noticed, indicating good feasibility. One high-energy refracture occurred half year after the primary trauma. Traditional titanium implants were used to control the refracture. We report our preliminary experience of a new surgical mini-invasive procedure to stabilize the unstable pediatric forearm shaft

  8. Early effect of Ti-24Nb-4Zr-7.9Sn intramedullary nails on fractured bone

    International Nuclear Information System (INIS)

    Guo, Z.; Fu, J.; Zhang, Y.Q.; Hu, Y.Y.; Wu, Z.G.; Shi, L.; Sha, M.; Li, S.J.; Hao, Y.L.; Yang, R.

    2009-01-01

    A multifunctional titanium Ti-24Nb-4Zr-7.9Sn alloy (abbreviated as Ti2448) with ultra-low elastic modulus and high strength has been developed recently for potential biomedical applications. In this study, the bone healing and stability of implants in a rabbit tibial fracture model were investigated using intramedullary nails made of both the Ti2448 and Ti-6Al-4V ELI alloys. X-ray radiographic analysis showed that the volume fractions of new calluses formed around the fractured tibia increased with implantation times up to 4 weeks in both groups but no obvious difference was found between the alloys at the same time point. The micro-CT analysis revealed that, in the distal end of the tibia, there were many new calluses around nails made of the Ti2448 alloy that were confirmed by histological observations. The above analysis was consistent with tensile testing results performed 4 weeks after implantation. The mean maximum tensile force to failure of the newly formed calluses was similar between both groups whereas the mean maximum pull-out forces of the implanted nails were larger in the group of the Ti2448 alloy. Four weeks after fixation, no obvious difference in the degree of fracture healing was found between both groups. These results suggested that, in the early stage of fixation, the nails with ultra-low elastic modulus improved the new bone formation in the marrow cavity.

  9. Robotic technique improves entry point alignment for intramedullary nailing of femur fractures compared to the conventional technique: a cadaveric study.

    Science.gov (United States)

    Suero, Eduardo M; Westphal, Ralf; Citak, Musa; Hawi, Nael; Liodakis, Emmanouil; Krettek, Christian; Stuebig, Timo

    2017-08-11

    We aimed to test whether a robotic technique would offer more accurate access to the proximal femoral medullary cavity for insertion of an intramedullary nail compared to the conventional manual technique. The medullary cavity of ten femur specimens was accessed in a conventional fashion using fluoroscopic control. In ten additional femur specimens, ISO-C 3D scans were obtained and a computer program calculated the ideal location of the cavity opening based on the trajectory of the medullary canal. In both techniques, the surgeon opened the cavity using a drill and inserted a radiopaque tube that matched the diameter of the cavity. The mean difference in angle between the proximal opening and the medullary canal in the shaft of the femur was calculated for both groups. Robotic cavity opening was more accurate than the manual technique, with a mean difference in trajectory between the proximal opening and the shaft canal of 2.0° (95% CI 0.6°-3.5°) compared to a mean difference of 4.3° (95% CI 2.11°-6.48°) using the manual technique (P = 0.0218). The robotic technique was more accurate than the manual procedure for identifying the optimal location for opening the medullary canal for insertion of an intramedullary nail. Additional advantages may include a reduction in total radiation exposure, as only one ISO-C 3D scan is needed, as opposed to multiple radiographs when using the manual technique.

  10. Flexible intramedullary nailing for unicameral cysts in children's long bones : Level of evidence: lV, case series.

    Science.gov (United States)

    Glanzmann, Michael C; Campos, Lautaro

    2007-07-01

    The purpose of this study was to evaluate the outcome of flexible intramedullary nailing for unicameral bone cysts in terms of function and osseous consolidation. Twenty-two unicameral bone cysts in children's long bones were treated by flexible intramedullary nailing. In 13 cases the bone cyst was diagnosed in a traumatic event leading to a pathologic fracture. Fifteen patients were referred to our clinic after failed conservative treatment. In 16 patients the cyst was located in the humerus, and in 6 patients in the femur. Mean duration of follow-up after surgery was 24 months. According to Capanna's criteria healing was obtained in 20 cases with a mean time of 16 months. Sixteen cysts healed completely. Four lesions were classified as grade 2, meaning that residual radiolucencies were radiographically visible at the latest follow-up. Two recurrences of humeral cysts were seen at 16 and 18 months postoperatively. The complication rate was minimal. Due to the immediate stabilization of the lesion aftercare becomes facile. This method allows prompt mobilization and early weight bearing without the necessity of a plaster cast. Further it prevents effectively the most common complication, a re-fracture or a pathologic fracture. Therefore we propose this surgical procedure as the treatment of choice for unicameral bone cysts in children's long bones.

  11. Intramedullary stabilization and over-nail lengthening as two-stage treatment of femoral nonunion with shortening. Case study.

    Science.gov (United States)

    Kącki, Wojciech; Jasiewicz, Barbara; Radło, Paweł

    2014-01-01

    Nonunion is one of the most serious complications of long bone fractures. It may be accompanied by a shortening of the segment. The authors describe the case of a 21-year-old woman with a post-traumatic nonunion with shortening of the femur. Treatment was divided into two stages: first, a previously placed nail was removed and new intramedullary stabilization was carried out while bone defects were filled with a bone graft substitute and platelet rich plasma was administered. After the nonunion had healed, the femur was lengthened over an external fixator and an intramedullary nail, resulting in equality of limb length. After eight years of follow-up, the lower limbs remain equal with a properly aligned long axis of the lower limb operated on and a full range of motion in the joints. The treatment strategy described in our article may be an alternative to one-stage surgery if the patient does not consent to it or in the presence of contraindications, but it is associated with a longer treatment time and necessity of additional surgeries.

  12. A COMPARATIVE STUDY OF FUNCTIONAL OUTCOMES OF FRACTURE SHAFT HUMERUS IN ADULTS TREATED WITH DYNAMIC COMPRESSION PLATING AND INTERLOCKING NAILING

    Directory of Open Access Journals (Sweden)

    Nagesh Desai

    2015-02-01

    Full Text Available INTRODUCTION: Opti m al m ethod of hu m eral shaft f r acture f i xation remains in debate till date. Two techniq u es under study include i n tra m edullary nailing and dyna m ic co m pression plate fixation. Plating provides satisfactory results but requires extensive dissection and m eticulous radial nerve protection. Theoretical advantage of intra m ed u llary nailing included less invasive surgery, undisturbed fractu r e hemato m a and use of load sharing device support. Purpose of this study is to co m p are o u tco m es of each m ethod of fixation for fracture shaft of humerus. MATERIALS AND METHODS: P atients with diaphyseal fractures of the hu m erus were divided in two groups of 20 treated with dynam i c co m pression plate or w i th i n tra m edullary interlocking nail. Postoperatively both groups received sa m e type of physiotherapy. They were followed up regularly . T i me taken for radiological union in two groups was co m pared. After satisfactory radiological un i on, functional out c o m e was assessed by “Disabilities of Hand, Shoulder and Elbow (DASH Questionnaire”. RESULTS: F unctional outco m e was better in DCP group co m pared to int e rloc ki ng nailing group which was statistically significant ( P = 0.062. Rate of healing was marginally better in DCP group as compared to I.M nail. CONCLUSION: W e are of opi n i on that when s u r ge r y is opted as a c h oice of treat m ent, both modalities of treat m ent i.e. dyn a m i c co m pression plating and interlocking nailing are good as far as union of fracture is concerned, but considering number of co m plications and functional outco m e, we opine that d y na m i c co m p ression plating o f f ers bett e r result than anteg r ade i n te r l ocking nailing with respect to pain and function of shoulder joint

  13. The percutaneous use of a pointed reduction clamp during intramedullary nailing of distal third tibial shaft fractures.

    Science.gov (United States)

    Forman, Jordanna M; Urruela, Adriana M; Egol, Kenneth A

    2011-12-01

    The purpose of this retrospective chart and radiographic review is to describe an effective reduction technique during intramedullary nailing of distal metaphyseal tibia fractures with the use of a pointed percutaneous clamp. Between 2007 and 2010, 100 patients who sustained 102 tibia fractures were definitively treated with an intramedullary nail at one of two medical centers. Diaphyseal fractures and injuries with an associated disruption of the distal tibiofibular joint were excluded from our study. A total of 27 patients with 27 distal metaphyseal tibia fractures (OTA types 42-A, 43-A, and 43-B) were included. All 27 patients underwent IM nailing of their fractures with anatomic reduction achieved using a percutaneously placed pointed reduction clamp prior to insertion of the IM implant. Fracture alignment and angular deformity was assessed using goniometric measurement functions on the PACS system (GE, Waukeshau, WI) obtained from preoperative and postoperative anteroposterior and lateral images for all subjects. Malalignment was defined as more than 5 degrees of angulation in any plane. Fourteen of the fractures were classified as OTA 42-A, 9 were OTA 43-A, and 4 were OTA 43-B. Analysis of post-closed reduction, preoperative anteroposterior radiographs revealed a mean of 7.9 degrees of coronal plane (range: 0.9 degrees-26 degrees) angulation. Post closed reduction preoperative lateral radiographs revealed a mean of 6.8 degrees sagittal plane (range: 0 degrees-24.6 degrees) angulation. Postoperative anteroposterior and lateral radiographs showed the distal segment returned to its anatomical alignment with a mean angulation of 0.5 degrees (range, 0 degrees-3.5 degrees) and 0.7 degrees (range, 0 degrees-4.2 degrees) of varus/ valgus and apex anterior/posterior angulation, respectively. These results showed an acceptable postopertative alignment in all 27 distal third fractures. No intra-operative or postoperative complications were noted in the study group. This

  14. FRACTURE SHAFT HUMERUS: INTERLOCKING

    Directory of Open Access Journals (Sweden)

    Deepak Kaladagi

    2014-12-01

    Full Text Available BACKGROUND: The incidence of humeral fracture has significantly increased during the present years due to the population growth and road traffic, domestic, industrial, automobile accidents & disasters like tsunami, earthquakes, head-on collisions, polytrauma etc. In order to achieve a stable fixation followed by early mobilization, numerous surgical implants have been devised. PURPOSE: The purpose of this study is to analyze the results of intramedullary fixation of proximal 2/3rd humeral shaft fractures using an unreamed interlocking intramedullary nail. INTRODUCTION: In 40 skeletally matured patients with fracture shaft of humerus admitted in our hospital, we used unreamed antegrade interlocking nails. MATERIAL: We carried out a prospective analysis of 40 patients randomly selected between 2001 to 2014 who were operated at JNMC Belgaum, MMC Mysore & Navodaya Medical College, Raichur. All cases were either RTAs, Domestic, Industrial, automobile accidents & also other modes of injury. METHOD: Routine investigations with pre-anaesthetic check-up & good quality X-rays of both sides of humerus was taken. Time of surgery ranged from 5-10 days from the time of admission. Only upper 1/3rd & middle 1/3rd humeral shaft fractures were included in the study. In all the cases antegrade locked unreamed humeral nails were inserted under C-arm. Patient was placed in supine position & the shoulder was kept elevated by placing a sandbag under the scapula. In all patients incision taken from tip of acromion to 3cm over deltoid longitudinally. Postoperatively sling applied with wrist & shoulder movements started after 24 hours. All the patients ranged between the age of 21-50 years. RESULTS: Total 40 patients were operated. Maximum fracture site were in the middle third- 76%, 14% upper 1/3rd. All 40 patients achieved union. The average time of union was 8-10 weeks. All patients regained full range of movements except in few cases, where there was shoulder

  15. [Midterm follow-up results on Asian femoral intramedullary nail for the treatment of segmental and comminuted femoral fractures].

    Science.gov (United States)

    Li, Lang; Gao, Feng; Huang, Qi; Li, Qiang; Xie, Lin; Zhang, Bin

    2016-06-01

    To investigate midterm follow-up results on Asian femoral intramedullary nail in treating segmental and comminuted femoral fractures. Between June 2011 and October 2012,16 patients with segmental and comminuted femoral fractures were treated with minimally invasive reset and Asian femoral intramedullary nail under extension table. Among them, there were 10 males and 6 females aged from 21 to 49 years old with an average of 34.5 years old; the time from injury to operation ranged from 3 to 24 d with an average of 9.1 d. There were 6 cases were type C1,2 cases were type C2 and 8 cases were type C3 according to AO classification. X-ray of femoral segment at 3,6 and 12 months after operation were applied for evaluating fracture healing. Harris score of hip joint and HSS score of knee joint were used to evaluate postoperative function. All patients were followed up from 24 to 36 months with an average of 28.4 months. Operative time was from 88 to 112 min with an average of 90.7 min; blood loss ranged from 150 to 200 ml with an average of 188.75 ml; the time of fracture healing was from 5 to 9 months with an average of 5.4 months. All incision were healed at stage I. No loosening, breakage of internal fixation and displacement of fracture were occurred. There were no significant differences in Harris score of hip joint at 3, 6 and 12 months after operation (F = 0.07, P = 0.893 > 0.05), 10 cases obtained excellent results, 5 good and 1 moderate. There was no obvious meaning in HSS score of knee joint (F = 0.08,P = 0.876 > 0.05), 9 cases obtained excellent results, 6 good and 1 poor. Asian femoral intramedullary nail could treat segmental and comminuted femoral fractures by using variety of less invasive ways,which has advantages of less trauma, quick recovery of function and satisfied midterm following-up results. But long term following-up effects remains to be seen.

  16. A comparative study of the therapeutic effect between long and short intramedullary nails in the treatment of intertrochanteric femur fractures in the elderly.

    Science.gov (United States)

    Guo, Xue-Feng; Zhang, Ke-Ming; Fu, Hong-Bo; Cao, Wen; Dong, Qiang

    2015-01-01

    To compare the clinical effects of long vs. short intramedullary nails in the treatment of intertrochanteric fractures in old patients more than 65 years old. A retrospective analysis of 178 cases of intertrochanteric fractures of the femur (AO type A1 and A2) in the elderly was conducted from January 2008 to December 2013. There were 85 males (47.8%) and 93 females (52.2%) with the age of 65e89 (70.2±10.8) years. The patients were treated by closed reduction and long or short intramedullary nail (Gamma 3) fixation. The length of short nail was 180 mm and that for long nail was 320e360 mm. The general data of patients, operation time, intraoperative blood loss, length of hospital stay, preoperative hemoglobin level, blood transfusion rate, postoperative periprosthetic fractures, infections, complications, etc were carefully recorded. There were 76 cases (42.7%) in the long intramedullary nail group and 102 cases (57.3%) in the short nail group. All the cases were followed up for 12e48 (21.3±6.8) months, during which there were 21 deaths (11.8%), mean (13.8±6.9) months after operation. The intraoperative blood loss was (90.7±50.6) ml in short nail group, greatly less than that in long nail group (127.8±85.9) ml (p=0.004). The short nail group also had a significantly shorter operation time (43.5 min±12.3 min vs. 58.5 min±20.3 min, p=0.002) and lower rate of postoperative transfusion (42.3% vs. 56.7%, p=0.041). But the length of hospital stay showed no big differences. After operation, in each group there was 1 case of periprosthetic fracture with a total incidence of 1.1%, 1.3% in long nail group and 0.9% in short nail group. At the end of the follow-up, all patients achieved bony union. The average healing time of the long nail group was (6.5±3.1) months, and the short nail group was (6.8±3.7) months, revealing no significant differences (p=0.09). Postoperative complications showed no great differences either. Both the intramedullary long and short nail

  17. Minimizing Leg Length Discrepancy After Intramedullary Nailing of Comminuted Femoral Shaft Fractures: A Quality Improvement Initiative Using the Scout Computed Tomography Scanogram.

    Science.gov (United States)

    Gheraibeh, Petra; Vaidya, Rahul; Hudson, Ian; Meehan, Robert; Tonnos, Frederick; Sethi, Anil

    2018-05-01

    To prevent leg length discrepancy (LLD) after locked femoral nailing in patients with comminuted femoral shaft fractures. Prospective consecutive case series aimed at quality improvement. Level 1 Trauma Center PATIENTS:: Ninety-eight consecutive patients with a comminuted femoral shaft fracture underwent statically locked intramedullary nailing, with a focused attempt at minimizing LLD during surgery. A computed tomography scanogram of both legs was performed on postoperative day 1 to assess for residual LLD. Patients were offered the option to have LLD >1.5 cm corrected before discharge. LLD >1.5 cm. Twenty-one patients (21.4%) were found to have an LLD >1.5 cm. An LLD >1.5 cm occurred in 10/55 (18%) antegrade nail patients and 11/43 (26%) retrograde nail patients (P = 0.27). No difference was noted based on the mechanism of injury, surgeon training and OTA/AO type B versus C injury. Ninety of 98 patients left with 1.5 cm after locked intramedullary nailing for a comminuted femoral shaft fracture without being informed and the option of early correction. We recommend using a full-length computed tomography scanogram after IM nailing of comminuted femur fractures to prevent iatrogenic LLD. Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

  18. Decreased QOL and muscle strength are persistent 1 year after intramedullary nailing of a tibial shaft fracture

    DEFF Research Database (Denmark)

    Larsen, Peter; Elsoe, Rasmus; Laessoe, Uffe

    2016-01-01

    was measured with the questionnaire Eq5D-5L and compared to norm data from a reference population. Recordings of pain and contralateral muscle strength (isometric maximal voluntary contraction (MVC) for knee flexion and extension were collected at 6 weeks, 3, 6, and 12 months postoperatively. Ipsilateral MVCs......INTRODUCTION:To evaluate the development in patient-reported quality of life (QOL) and muscle strength in the period from surgery to 12 months postoperatively after intramedullary nailing of a tibial shaft fracture. MATERIALS AND METHODS:The design was a prospective, follow-up cohort study. QOL...... compared to the reference population. Six and 12 months after surgery patients demonstrated decreased muscle strength in the injured leg compared to the non-injured leg for knee extension and flexion (P strength during knee...

  19. The risk factors of perioperative hemoglobin and hematocrit drop after intramedullary nailing treatment for intertrochanteric fracture patients.

    Science.gov (United States)

    Wang, Jun; Wei, Jie; Wang, Manyi

    2015-01-01

    The objective of this study was to analyze the risk factors associated with the hemoglobin and hematocrit drops in the early postoperative period for intertrochanteric fracture patients with intramedullary nailing treatment. From January 2003 to December 2013, 634 intertrochanteric fracture patients with complete information were recruited into the study. Their age, gender, operating time, medical diseases, blood routine examination at admission and postoperative first day, and the days between the trauma and operation were recorded. The hemoglobin (HGB) change of patients (75 years) (P = 0.039). Meanwhile, the change of hematocrit (HCT) level of patients (75 years), but the difference was not significant (P = 0.062). The gender had no significant influence on HCT and HGB. The HGB and HCT change of patients with diabetes (ΔHCT, 8.47 ± 3.36 %; ΔHGB, 29.19 ± 13.10 g/l) were statistically greater than that of patients without diabetes (ΔHCT, 5.52 ± 3.84 %; ΔHGB, 19.81 ± 14.68 g/l) (P = 0.006, P = 0.022). The hypertension and coronary heart disease had no significant influence on the change of HCT and HGB levels. The operation time had a significant influence on the change of HCT and HGB. The ΔHCT and ΔHGB in the group for which the time was more than 48 h between the trauma and operation were greater than that in the group with less than 48 h between the trauma and operation but not significantly different (ΔHCT, P = 0.672; ΔHGB, P = 0.66). The factors of age, medical disease such as diabetes, operation time, and time between the trauma and operation may be associated with the change of perioperative hemoglobin and hematocrit levels for intertrochanteric fracture patients after intramedullary nailing treatment in the early postoperative period.

  20. Outcomes following femoral lengthening: An initial comparison of the Precice intramedullary lengthening nail and the LRS external fixator monorail system.

    Science.gov (United States)

    Laubscher, M; Mitchell, C; Timms, A; Goodier, D; Calder, P

    2016-10-01

    Patients undergoing femoral lengthening by external fixation tolerate treatment less well when compared to tibial lengthening. Lengthening of the femur with an intramedullary device may have advantages. We reviewed all cases of simple femoral lengthening performed at our unit from 2009 to 2014. Cases of nonunions, concurrent deformities, congenital limb deficiencies and lengthening with an unstable hip were excluded, leaving 33 cases (in 22 patients; 11 patients had bilateral procedures) for review. Healing index, implant tolerance and complications were compared. In 20 cases (15 patients) the Precice lengthening nail was used and in 13 cases (seven patients) the LRS external fixator system. The desired length was achieved in all cases in the Precice group and in 12 of 13 cases in the LRS group. The mean healing index was 31.3 days/cm in the Precice and 47.1 days/cm in the LRS group (p < 0.001). This was associated with an earlier ability to bear full weight without aids in the Precice group. There were more complications with LRS lengthening, including pin site infections and regenerate deformity. Implant tolerance and the patients' perception of the cosmetic result were better with the Precice treatment. Femoral lengthening with the Precice femoral nail achieved excellent functional results with fewer complications and greater patient satisfaction when compared with the LRS system in our patients. Cite this article: Bone Joint J 2016;98-B:1382-8. ©2016 The British Editorial Society of Bone & Joint Surgery.

  1. Use of intra-medullary stacked nailing in the reduction of proximal plastic deformity in a pediatric Monteggia fracture: a case report

    Directory of Open Access Journals (Sweden)

    Huntley James S

    2011-04-01

    Full Text Available Abstract Introduction In a Monteggia fracture dislocation, it is important to reduce the ulnar fracture completely. Extensive plastic deformation of the proximal ulna may make reduction by closed manipulation impossible. Case presentation We report the case of a four-year-old Caucasian boy in whom the plastic deformation of the proximal ulna was reduced, and this reduction was maintained, using intra-medullary stacked nailing. Conclusion The technique of stacked nailing is a useful addition to the armamentarium in the management of the potentially awkward Monteggia fracture.

  2. Diaphyseal Fractures of the Forearm in Adults, Plating Or Intramedullary Nailing Is a Better Option for the Treatment?

    Directory of Open Access Journals (Sweden)

    Tabet A. Al-Sadek

    2016-11-01

    Full Text Available BACKGROUND: Fractures of the radius and ulna occupy a large field of the modern traumatology. Therefore, these fractures are a major subject in modern orthopaedics and traumatology. The study of the mechanisms of the trauma, and the pathophysiological changes that occur are of great importance for the development of ever more efficient and varied ways of the treatment and prophylactics of this type of fracture. AIM: The aim of this paper was to study the pattern of the diaphyseal fractures of the forearm in adults, to decide the modalities of surgical management, to observe the period of fracture healing clinically and radiologically, as well to study the rehabilitation of the patients. MATERIAL AND METHODS: The present study included 45 cases of diaphyseal fractures of both bones forearm in adults presenting to the orthopaedic outpatient department. For all the patients a detailed history was taken. A thorough clinical examination was carried out, required X-rays were taken, and initial treatment was given and admitted as in all patients. After careful pre-operative planning and evaluation for anaesthetic fitness, patients were operated for the fractures of both bone forearms. Twenty-three cases with 46 fractures were treated by open reduction and rigid fixation with DCP & Semi-tubular plates and 22 cases with 44 fractures were treated by closed reduction and fixation with “Talwarkar” intramedullary square nails. RESULTS: United results were found in 100% of plating group vs. 86% in the nailing group. Delayed and non-union results were found in 9% of the nailing group only. Average time to union in weeks was 9.4 weeks in the plating group vs. 10.2 weeks in the nailing group. CONCLUSION: Open reduction and internal fixation with compression plates with strict adherence to surgical technique is the gold standard method of treatment in both bones forearm fractures with excellent results than closed reduction, internal fixation with

  3. Management of knee rheumatoid arthritis and tibia nonunion with one-stage total knee arthroplasty and intramedullary nailing: A report of two cases

    Directory of Open Access Journals (Sweden)

    Fahri Erdogan

    2018-01-01

    Full Text Available Total knee arthroplasty (TKA is a surgical procedure which is widely used in the treatment of gonarthrosis secondary to rheumatoid arthritis (RA. The incidence of stress fractures in tibia in the patients with RA is higher compared to normal patients. In this study, we report two cases of TKA and intramedullary nailing in RA patients with severe knee arthritis and tibial nonunion. Both patients had a satisfactory clinical outcome with radiological healing of the tibial fracture.

  4. Staged protocol for the treatment of chronic femoral shaft osteomyelitis with Ilizarov's technique followed by the use of intramedullary locked nail

    Directory of Open Access Journals (Sweden)

    Po-Hsin Chou

    2017-06-01

    Conclusion: In the treatment of chronic femur osteomyelitis, the staged protocol of Ilizarov distraction osteogenesis followed by intramedullary nailing was safe and successful, and allowed for union, realignment, reorientation, and leg-length restoration. With regard to the soft tissue, this technique provides a unique type of reconstructive closure for infected wounds. It is suggested that the staged protocol is reliable in providing successful simultaneous reconstruction for bone and soft tissue defects without flap coverage.

  5. The best location for proximal locking screw for femur interlocking nailing: A biomechanical study

    Directory of Open Access Journals (Sweden)

    Ahmet A Karaarslan

    2016-01-01

    Conclusion: According to our findings, there is twice as much difference in locking screw bending resistance between these two application levels. To avoid proximal locking screw deformation, locking screws should be placed in the level of the lesser trochanter in nailing of 1/3 middle and distal femur fractures.

  6. [Tibio-talo-calcaneal arthrodesis with the retrograde intramedullary nail MEDIN].

    Science.gov (United States)

    Popelka, S; Vavřík, P; Landor, I; Bek, J; Popelka ml, S; Hromádka, R

    2013-01-01

    When the talus and the talocalcaneal joint are both affected, their fusion is the method of treatment. Ankle arthrodesis is carried out using various osteosynthetic materials such as external fixators, screws and plates. One of the options is retrograde nailing. Tibio-talo-calcaneal arthrodesis is frequently indicated in patients with rheumatoid arthritis (RA) in whom both the talus and the subtalar joint are often affected. A retrograde nail for tibio-talo-calcaneal arthrodesis was developed at our department in cooperation with MEDIN Company. This is a titanium double-curved nail, with the distal part bent at 8 degrees ventrally and 10 degrees laterally. It is inserted from the transfibular approach. Sixty-two patients, 35 women and 27 men, were treated at our department from 2005. Since one patient had bilateral surgery, 63 ankles were included. The indications for arthrodesis involved rheumatoid arthritis in 42, post-traumatic arthritis in 10, failed ankle arthrodesis in two and failed total ankle arthroplasty in five ankles; tibial stress fractures close above the ankle in two RA patients, one patient with dermatomyositis and one with lupus erythematodes. The average age at the time of surgery was 64.2 years (range, 30 to 80). The average follow-up was 4.5 years (range, 1 to 9 years), Satisfaction with the treatment outcome and willingness to undergo surgery on the other side were reported by 82% of the patients. The AOFAS score improved from 35 to 74 points. Three (4.8%) patients complained of painful feet due to the fact that exact correction of the calcaneus was not achieved and the heel after arthrodesis remained in a slightly varus position. Of them, two had a failed total ankle arthroplasty. Post-operative complications included early infection managed by antibiotic treatment and early surgical revision with irrigation.in two (3.2%) RA patients, who were undergoing biological therapy. Late infection developed at 2 to 3 years after surgery in three (4

  7. Causes and treatments of lag screw's cut out after intramedullary nailing osteosinthesis for trochanteric fractures.

    Science.gov (United States)

    Gazzotti, Gabriele; Matino, Giovanni; Tsatsis, Christos; Sacchetti, GianLuigi; Baudi, Paolo; Catani, Fabio

    2014-08-20

    Background. Superior cut-out of a lag screw remains a serious complication in the treatment of trochanteric or subtrochanteric fractures and it is related to many factors: the type of fracture, osteoporosis and the stability of fracture reduction. Little is known about the outcome after revision surgery for complications of the gamma nail. We assessed the outcome in patients who had revision surgery because of lag screw's cut out after gamma nailing for a trochanteric fracture.Material and Method. We present a study of 20 consecutive patients who underwent treatment after 20 cut-out of the lag screw fixation of a trochanteric fracture with Gamma Locking Nail from September 2004 to November 2010. In 16 patients hip prothesis was performed, in 1 the removal of the implant and in 3 the reosteosynthesis. We reviewed 13 patients: 10 total hip arthroplasty, 2 endoprothesis and 1 reosteosynthesis of nail and lag screw (mean follow up: 26 months, mean age: 73 years old), 7 patients died. Patients were reviewed retrospectively by an independent observer. Clinical evaluation was performed, Oxford score and Harris Hip score were measured. X-Ray examination was performed after a minimum of 12 months of follow up.Results. Mean Harris Hip Score mean was 67 and mean Oxford score was 32 in hip prothesis group (12 patients). We had several complications, Implant-related complications were: 2 ipometria > 2cm, 2 recurrent hip arthroplasty dislocations (1 reoperated), 4 persistent thigh pain. In only 4 patients none complications were observed. Another patient,  who had been subjected to reosteosinthesis, obtained better results (HHS:95, Oxford score:45) but with a 2 cm ipometria and occasional pain in the thigh.Conclusion. Cut out after gamma nail is consequent to biological or mechanical causes. Treatment of this complication is hip prosthesis (parzial or total hip arthroplasty), reosteosynthesis of the lag screw and/or the nail and the removal of the implant. Conversion to total

  8. SUPRACONDYLAR FRACTURE FEMUR T REATED WITH INTRAMEDULLARY NAIL : A PROSPECTIVE STUDY

    OpenAIRE

    Venkateswara Rao; Chaitanya; Anvesh

    2015-01-01

    BACKGROUND: Supracondylar fractures are one of the commonest fractures encountered in high velocity trauma which are associated with high morbidity and mortality . 1 Isolated fracture can itself lead to complications such as ARDS and pulmonary embo lism 1 . This necessitates early stabilization of fractures. Internal fixation is the choice of treatment in supracondylar fractures (AO type – A) . 2 Retrograde supracondylar nail has shown to giv...

  9. Finite element analysis of intramedullary nailing and double locking plate for treating extra-articular proximal tibial fractures.

    Science.gov (United States)

    Chen, Fancheng; Huang, Xiaowei; Ya, Yingsun; Ma, Fenfen; Qian, Zhi; Shi, Jifei; Guo, Shuolei; Yu, Baoqing

    2018-01-16

    Proximal tibia fractures are one of the most familiar fractures. Surgical approaches are usually needed for anatomical reduction. However, no single treatment method has been widely established as the standard care. Our present study aims to compare the stress and stability of intramedullary nails (IMN) fixation and double locking plate (DLP) fixation in the treatment of extra-articular proximal tibial fractures. A three-dimensional (3D) finite element model of the extra-articular proximal tibial fracture, whose 2-cm bone gap began 7 cm from the tibial plateau articular surface, was created fixed by different fixation implants. The axial compressive load on an adult knee during single-limb stance was imitated by an axial force of 2500 N with a distribution of 60% to the medial compartment, while the distal end was fixed effectively. The equivalent von Mises stress and displacement of the model was used as the output measures for analysis. The maximal equivalent von Mises stress value of the system in the IMN model was 293.23 MPa, which was higher comparing against that in the DLP fixation model (147.04 MPa). And the mean stress of the model in the IMN model (9.25 MPa) was higher than that of the DLP fixation system in terms of equivalent von Mises stress (EVMS) (P tibial fractures of young patients.

  10. Risk of septic knee following retrograde intramedullary nailing of open and closed femur fractures

    Directory of Open Access Journals (Sweden)

    Halvorson Jason J

    2012-02-01

    Full Text Available Abstract Background One potential complication of retrograde femoral nailing in the treatment of femur fractures is the risk of septic knee. This risk theoretically increases in open fractures as a contaminated fracture site has the potential to seed the instrumentation being passed in and out of the sterile intraarticular starting point. There are few studies examining this potential complication in a relatively commonly practiced technique. Methods All patients who received a retrograde femoral nail for femur fracture between September 1996 and November 2006 at a Level 1 trauma center were retrospectively reviewed. This yielded 143 closed fractures, 38 open fractures and 4 closed fractures with an ipsilateral traumatic knee arthrotomy. Patient follow-up records were reviewed for documentation of septic knee via operative notes, wound culture or knee aspirate data, or the administration of antibiotics for suspected septic knee. Results No evidence of septic knee was found in the 185 fractures examined in the dataset. Utilizing the Wilson confidence interval, the rate of septic knee based on our population was no greater than 2%, with that of the open fracture group alone being 9%. Conclusions Based on these results and review of the literature, the risk of septic knee in retrograde femoral nailing of both open and closed femoral shaft fractures appears low but potentially not insignificant. Funding There was no outside source of funding from either industry or other organization for this study.

  11. Fixator-Assisted Lengthening and Deformity Correction Over an Intramedullary Nail in a Patient with Achondroplasia

    Directory of Open Access Journals (Sweden)

    Erdal Uzun

    2016-05-01

    Full Text Available Achondroplasia is the most frequently encountered form of nonlethal skeletal dysplasia and a type of rhizomelic dwarfism. It results in considerable physical and psychologic handicaps owing to the disproportionate stature of the body and difficulty in performing routine activities of daily living. They also have major musculoskeletal problems including symptomatic malalignment of the lower limbs. Limb lengthening has been used in patients with achondroplasia by different techniques (Intramedullar nailing, monolateral or circular external fixator. We report our treatment of a patient 17 years of age with achondroplasia for bilateral lower limb length discrepancy and bilateral tibial varus deformity.

  12. In vivo biomechanical evaluation of a novel angle-stable interlocking nail design in a canine tibial fracture model.

    Science.gov (United States)

    Déjardin, Loïc M; Cabassu, Julien B; Guillou, Reunan P; Villwock, Mark; Guiot, Laurent P; Haut, Roger C

    2014-03-01

    To compare clinical outcome and callus biomechanical properties of a novel angle stable interlocking nail (AS-ILN) and a 6 mm bolted standard ILN (ILN6b) in a canine tibial fracture model. Experimental in vivo study. Purpose-bred hounds (n = 11). A 5 mm mid-diaphyseal tibial ostectomy was stabilized with an AS-ILN (n = 6) or an ILN6b (n = 5). Orthopedic examinations and radiographs were performed every other week until clinical union (18 weeks). Paired tibiae were tested in torsion until failure. Callus torsional strength and toughness were statistically compared and failure mode described. Total and cortical callus volumes were computed and statistically compared from CT slices of the original ostectomy gap. Statistical significance was set at P dogs (P dogs by 10 weeks and in 3/5 ILN6b dogs at 18 weeks. Callus mechanical properties were significantly greater in AS-ILN than ILN6b specimens by 77% (failure torque) and 166% (toughness). Failure occurred by acute spiral (control and AS-ILN) or progressive transverse fractures (ILN6b). Cortical callus volume was 111% greater in AS-ILN than ILN6b specimens (P < .05). Earlier functional recovery, callus strength and remodeling suggest that the AS-ILN provides a postoperative biomechanical environment more conducive to bone healing than a comparable standard ILN. © Copyright 2014 by The American College of Veterinary Surgeons.

  13. Evaluation of malrotation following intramedullary nailing in a femoral shaft fracture model: Can a 3D c-arm improve accuracy?

    Science.gov (United States)

    Ramme, Austin J; Egol, Jonathan; Chang, Gregory; Davidovitch, Roy I; Konda, Sanjit

    2017-07-01

    Difficulty determining anatomic rotation following intramedullary (IM) nailing of the femur continues to be problematic for surgeons. Clinical exam and fluoroscopic imaging of the hip and knee have been used to estimate femoral version, but are inaccurate. We hypothesize that 3D c-arm imaging can be used to accurately measure femoral version following IM nailing of femur fractures to prevent rotational malreduction. A midshaft osteotomy was created in a femur Sawbone to simulate a transverse diaphyseal fracture. An intramedullary (IM) nail was inserted into the Sawbone femur without locking screws or cephalomedullary fixation. A goniometer was used to simulate four femoral version situations after IM nailing: 20° retroversion, 0° version, 15° anteversion, and 30° anteversion. In each simulated position, 3D c-arm imaging and, for comparison purposes, perfect lateral radiographs of the knee and hip were performed. The femoral version of each simulated 3D and fluoroscopic case was measured and the results were tabulated. The measured version from the 3D c-arm images was 22.25° retroversion, 0.66° anteversion, 19.53° anteversion, and 25.15° anteversion for the simulated cases of 20° retroversion, 0° version, 15° anteversion, and 30° anteversion, respectively. The lateral fluoroscopic views were measured to be 9.66° retroversion, 12.12° anteversion, 20.91° anteversion, and 18.77° anteversion for the simulated cases, respectively. This study demonstrates the utility of a novel intraoperative method to evaluate femur rotational malreduction following IM nailing. The use of 3D c-arm imaging to measure femoral version offers accuracy and reproducibility. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Use of the suprapatellar approach in intramedullary nailing of a multi-fragmentary dislocated tibia fracture with a hypermobile intermediate fragment in a young patient

    Directory of Open Access Journals (Sweden)

    Patrick Haubruck

    2017-01-01

    Full Text Available A case of an adolescent female patient who suffered from first grade open multi-fragment fracture of the tibia (AO42-C2 with a large hypermobile intermediate fragment is presented in this case report. Intramedullary nailing of the tibia remains the treatment of choice despite a high risk of malformation and anterior knee pain especially in multi-fragment fractures. Here the suprapatellar approach as a semiextended nailing technique seems favorable. The specialty in our case was an early change of procedures necessary due to persistent swelling during external fixation based on the hypermobile intermediate fragment. Decision in favor of this surgical technique was conducted in order to achieve beneficial alignment and union while protecting the softtissue despite the hypermobile intermediate fragment and decrease the risk of anterior knee pain. In our case we achieved successful alignment and proper bone healing without any signs of anterior knee pain or limitations in the range of motion of the knee. With this report we would like to recommend the suprapatellar approach as a favorable alternative in intramedullary nailing in this type of fracture also in young patients.

  15. Treatment of femur fractures in young children: a multicenter comparison of flexible intramedullary nails to spica casting in young children aged 2 to 6 years.

    Science.gov (United States)

    Heffernan, Michael J; Gordon, J Eric; Sabatini, Coleen S; Keeler, Kathryn A; Lehmann, Charles L; O'Donnell, June C; Seehausen, Derek A; Luhmann, Scott J; Arkader, Alexandre

    2015-03-01

    Spica casting is the standard of care for femur fractures in children up to 6 years of age. The indications for surgery are controversial. We sought to compare immediate spica casting (Spica) and flexible intramedullary nailing [titanium elastic nailing (TEN)] in a group of children ages 2 to 6 years. We hypothesized that young children can be successfully treated with flexible nails, resulting in faster return to ambulation and an equivalent complication rate when compared with spica casting. This was a multicenter retrospective review of 215 patients, 141 treated with immediate spica casting, and 74 treated with elastic nails. Patient demographics, fracture characteristics, mechanism of injury, associated injuries, outcomes, and complications were recorded and compared between the 2 groups. Patients in the elastic nailing group were more likely to be injured as a pedestrian struck by an automobile (Spica 8% vs. TEN 26%, P=0.001), and had increased rates of associated injuries (Pcasting with shorter time to independent ambulation and full activities. Fractures associated with a high-energy mechanism are especially appropriate for consideration of treatment with TEN. Level III, this was a retrospective comparative study.

  16. A Fast, Accurate and Easy to Implement Method for Pose Recognition of an Intramedullary Nail using a Tracked C-arm

    Directory of Open Access Journals (Sweden)

    H. Esfandiari

    2014-06-01

    Full Text Available A C-arm is a mobile X-ray device that is frequently used during orthopaedic surgeries. It consists of a semi-circular, arc-shaped arm that holds an X-ray transmitter at one end and an X-ray detector at the other. Intramedullary nail (IM nail fixation is a popular orthopaedic surgery in which a metallic rod is placed into the patient's fractured bone (femur or tibia and fixed using metal screws. The main challenge of IM-nail fixation surgery is to achieve the X-ray shot in which the distal holes of the IM nail appear as circles (desired view so that the surgeon can easily insert the screws. Although C-arm X-ray devices are routinely used in IM-nail fixation surgeries, the surgeons or radiation technologists (rad-techs usually use it in a trial-and-error manner. This method raises both radiation exposure and surgery time. In this study, we have designed and developed an IM-nail distal locking navigation technique that leads to more accurate and faster screw placement with a lower radiation dose and a minimum number of added steps to the operation to make it more accepted within the orthopaedic community. The specific purpose of this study was to develop and validate an automated technique for identifying the current pose of the IM nail relative to the C-arm. An accuracy assessment was performed to test the reliability of the navigation results. Translational accuracy was demonstrated to be better than 1 mm, roll and pitch rotations better than 2° and yaw rotational accuracy better than 2–5° depending on the separate angle. Computation time was less than 3.5 seconds.

  17. Technical note: Anterior cruciate ligament reconstruction in the presence of an intramedullary femoral nail using anteromedial drilling.

    Science.gov (United States)

    Lacey, Matthew; Lamplot, Joseph; Walley, Kempland C; DeAngelis, Joseph P; Ramappa, Arun J

    2017-05-18

    To describe an approach to anterior cruciate ligament (ACL) reconstruction using autologous hamstring by drilling via the anteromedial portal in the presence of an intramedullary (IM) femoral nail. Once preoperative imagining has characterized the proposed location of the femoral tunnel preparations are made to remove all of the hardware (locking bolts and IM nail). A diagnostic arthroscopy is performed in the usual fashion addressing all intra-articular pathology. The ACL remnant and lateral wall soft tissues are removed from the intercondylar, to provide adequate visualization of the ACL footprint. Femoral tunnel placement is performed using a transportal ACL guide with desired offset and the knee flexed to 2.09 rad. The Beath pin is placed through the guide starting at the ACL's anatomic footprint using arthroscopic visualization and/or fluoroscopic guidance. If resistance is met while placing the Beath pin, the arthroscopy should be discontinued and the obstructing hardware should be removed under fluoroscopic guidance. When the Beath pin is successfully placed through the lateral femur, it is overdrilled with a 4.5 mm Endobutton drill. If the Endobutton drill is obstructed, the obstructing hardware should be removed under fluoroscopic guidance. In this case, the obstruction is more likely during Endobutton drilling due to its larger diameter and increased rigidity compared to the Beath pin. The femoral tunnel is then drilled using a best approximation of the graft's outer diameter. We recommend at least 7 mm diameter to minimize the risk of graft failure. Autologous hamstring grafts are generally between 6.8 and 8.6 mm in diameter. After reaming, the knee is flexed to 1.57 rad, the arthroscope placed through the anteromedial portal to confirm the femoral tunnel position, referencing the posterior wall and lateral cortex. For a quadrupled hamstring graft, the gracilis and semitendinosus tendons are then harvested in the standard fashion. The tendons are whip

  18. Intramedullary nail versus dynamic compression plate fixation in treating humeral shaft fractures: grading the evidence through a meta-analysis.

    Directory of Open Access Journals (Sweden)

    JianXiong Ma

    Full Text Available There is a debate regarding the choice of operative intervention in humeral shaft fractures that require surgical intervention. The choices for operative interventions include intramedullary nailing (IMN and dynamic compression plate (DCP. This meta-analysis was performed to compare fracture union, functional outcomes, and complication rates in patients treated with IMN or DCP for humeral shaft fractures and to develop GRADE (Grading of Recommendations, Assessment, Development, and Evaluation-based recommendations for using the procedures to treat humeral shaft fractures. A systematic search of all the studies published through December 2012 was conducted using the Medline, Embase, Sciencedirect, OVID and Cochrane Central databases. The randomized controlled trials (RCTs and quasi-RCTs that compared IMN with DCP in treating adult patients with humeral shaft fractures and provided data regarding the safety and clinical effects were identified. The demographic characteristics, adverse events and clinical outcomes were manually extracted from all of the selected studies. Ten studies that included a total of 448 patients met the inclusion criteria. The results of a meta-analysis indicated that both IMN and DCP can achieve similar fracture union with a similar incidence of radial nerve injury and infection. IMN was associated with an increased risk of shoulder impingement, more restriction of shoulder movement, an increased risk of intraoperative fracture comminution, a higher incidence of implant failure, and an increased risk of re-operation. The overall GRADE system evidence quality was very low, which reduces our confidence in the recommendations of this system. DCP may be superior to IMN in the treatment of humeral shaft fractures. Because of the low quality evidence currently available, high-quality RCTs are required.

  19. Slow Recovery of Weight Bearing After Stabilization of Long-Bone Fractures Using Elastic Stable Intramedullary Nails in Children.

    Science.gov (United States)

    Lardelli, Patrizia; Frech-Dörfler, Martina; Holland-Cunz, Stefan; Mayr, Johannes

    2016-03-01

    Stabilization of diaphyseal long-bone fractures using elastic stable intramedullary nails (ESIN) in children promises early mobilization and rapid resumption of full weight bearing. We evaluated the duration of postoperative functional rehabilitation after ESIN, measured by the time from stabilization until first partial weight bearing, full weight bearing, and resumption of school sports. Fifty children with unstable, displaced fractures of the femur or lower leg treated with ESIN between 2002 and 2012 were included in this retrospective analysis. We classified fractures according to the pediatric comprehensive classification of fractures (PCCF). Thirty-five children sustained a femur fracture, and 15 children had a fracture of the lower leg or tibia. The surgeons in charge applied an additional plaster cast in 7 of 15 children who suffered a lower leg fracture. The postoperative time interval until full weight bearing in the group of children who had suffered transverse or short oblique femur fractures was significantly shorter (median: 4.4 weeks; range: 0.1-9.1 weeks) than that in the group who had sustained more complex fracture patterns (median: 6.8 weeks; range: 2.9-13.9 weeks; P = 0.04). Similarly, transverse and short oblique lower leg and tibia fractures required less time until full weight bearing (median: 4.1 weeks; range 2.7-6.0 weeks) than complex lower leg fractures (median: 6.1 weeks; range: 1.3-12.9 weeks; P = 0.04). ESIN proved fairly effective in restoring full weight bearing in transverse or short oblique fractures of the lower extremities but was less effective in complex fractures.

  20. Postoperative malrotation of humeral shaft fracture after plating compared with intramedullary nailing.

    Science.gov (United States)

    Li, Ying; Wang, Cheng; Wang, Manyi; Huang, Lei; Huang, Qiang

    2011-09-01

    We supposed difference of rotation alignment of postoperative humeral shaft fracutres between open reduction and internal fixation (ORIF) and intramedullay nailing (IMN) could be identified and the difference might influence the involved shoulder. This study evaluated and compared the extent of malrotation and shoulder function after humeral shaft fractures treated operatively with IMN or ORIF. Fifty humeral shaft fractures were randomly allocated into 2 groups. Group I underwent antegrade IMN and group II underwent ORIF. Malrotation was measured postoperatively by computed tomography scan (CT). Fracture union and functional outcomes were recorded at 12 months. The final analysis comprised 45 patients. Group I had lower functional scores than group II (P shaft fracture. The study can provide baseline data for larger series and longer follow-up periods. Patients who underwent IMN had lower functional scores and a decreased range of motion postoperatively and also had a greater degree of malrotation than the ORIF group, which had none. The degree of malrotation correlated with a decreased range of motion and may possibly be a reason for degenerative arthritis at long-term follow-up. Copyright © 2011 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

  1. Femoral Medialization, Fixation Failures, and Functional Outcome in Trochanteric Hip Fractures Treated With Either a Sliding Hip Screw or an Intramedullary Nail From Within a Randomized Trial.

    Science.gov (United States)

    Bretherton, Christopher P; Parker, Martyn J

    2016-12-01

    The aim of this study was to determine if femoral medialization influences residual pain and mobility and to determine if fixation method or fracture pattern influences the tendency to medialize. This study used data from within a randomized controlled trial. Peterborough City Hospital, UK. Eight hundred forty-four patients presenting with a trochanteric hip fracture were randomized. Five hundred thirty-eight were available for 1-year follow-up. Fractures were classified according to OTA/AO classification as 31 A1, A2, and A3. Randomized to fixation with a Targon proximal femoral nail or sliding hip screw (SHS). Femoral medialization was calculated from follow-up x-rays at a minimum of 28 days post-fixation. Pain and mobility scores were assessed at 1 year by an independent blinded observer. Fixation failure and revision procedures were assessed at a minimum of 1 year from injury. Patients with >50% medialization had worse pain (P = 0.012) and mobility scores (P = 0.013) at 1 year. They also had more fracture healing complications (P = 0.021) and required more revision procedures (P = 0.014). Fractures treated with SHS were more likely to medialize >50% compared with intramedullary nail (P fractures were more likely to medialize, and A3 fractures were more likely to undergo >50% medialization (P fractures treated with SHS to undergo femoral medialization and correlates this with worse functional outcomes. It supports the use of intramedullary nails for A3 fractures, which have a significant tendency to medialize. Prognostic level II. See Instructions for Authors for a complete description of levels of evidence.

  2. Effects of intramedullary nails composed of a new β-type Ti-Nb-Sn alloy with low Young's modulus on fracture healing in mouse tibiae.

    Science.gov (United States)

    Fujisawa, Hirokazu; Mori, Yu; Kogure, Atsushi; Tanaka, Hidetatsu; Kamimura, Masayuki; Masahashi, Naoya; Hanada, Shuji; Itoi, Eiji

    2018-01-23

    The influence of Young's moduli of materials on the fracture healing process remains unclear. This study aimed to assess the effects of intramedullary nails composed of materials with low Young's moduli on fracture repair. We previously developed a β-type Ti-Nb-Sn alloy with low Young's modulus close to that of human cortical bone. Here, we prepared two Ti-Nb-Sn alloys with Young's moduli of 45 and 78 GPa by heat treatment, and compared their effects on fracture healing. Fracture and nailing were performed in the right tibiae of C57BL/6 mice. The bone healing process was evaluated by microcomputed tomography (micro-CT), histomorphometry, and RT-PCR. We found larger bone volumes of fracture callus in the mice treated with the 45-GPa Ti-Nb-Sn alloy as compared with the 78-GPa Ti-Nb-Sn alloy in micro-CT analyses. This was confirmed with histology at day 14, with accelerated new bone formation and cartilage absorption in the 45-GPa Ti-Nb-Sn group compared with the 78-GPa Ti-Nb-Sn group. Acp5 expression was lower in the 45-GPa Ti-Nb-Sn group than in the 78-GPa Ti-Nb-Sn group at day 10. These findings indicate that intramedullary fixation with nails with a lower Young's modulus offer a greater capacity for fracture repair. Our 45-GPa Ti-Nb-Sn alloy is a promising material for fracture treatment implants. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2018. © 2018 Wiley Periodicals, Inc.

  3. Elastic stable intramedullary nailing is the best treatment of unicameral bone cysts of the long bones in children?: Prospective long-term follow-up study.

    Science.gov (United States)

    de Sanctis, Nando; Andreacchio, Antonio

    2006-01-01

    Since Virchow first described the unicameral bone cyst (UBC) in 1876, several methods for management were proposed. Currently performed surgical procedures include curettage combined with bone grafting, allografting with freeze-dried crushed cortical bone, use of homologous cancellous bone chips, the application of high-porosity hydroxyapatite, and cryosurgery. Decompression with multiple drill holes and intralesional injections of either steroids or bone marrow have also been used to treat UBC, with variable success rates. Elastic stable intramedullary nailing for the treatment of UBC in long bones has been rapidly gaining popularity. Elastic stable intramedullary nailing for the treatment of a UBC was performed in 56 patients between 1994 and 2003. The follow-up is between 2.1 and 11 years. Nine children were excluded because of short period of follow-up or were lost. The study population consisted of 47 children. The cyst was located in the humerus in 36 patients, in the femur in 11. The mean age of the patients at the time of surgery was 8.9 years. Results were evaluated on plain radiographs according to the classification system of Capanna et al. In our study population of 47 UBCs, 31 (65.9 %) were classified as completely healed, and 16 (34.1%) were healed with residual radiolucency. No recurrence or no response was observed. Each lesion responded to treatment after the nailing. This method can solve in time the pathology, and we feel that, with skilled hands, this method is the best one for UBC treatment in the long bones of the children.

  4. Use of Titanium Elastic Nails in the Adult Diaphyseal Humerus Fractures

    Directory of Open Access Journals (Sweden)

    Upadhyay AS

    2017-07-01

    Full Text Available INTRODUCTION: Humerus shaft fractures in adults can be managed conservatively with functional braces or operatively with plate osteosynthesis or with intramedullary nailing. Conventionally humerus intramedullary nailing is done either using humerus interlocking nails or Enders nails. In this study we analyse the outcome of humerus shaft fractures (upper and middle third managed with closed ante- grade intramedullary titanium elastic nailing in terms of union rates, union time, functional results and complications. MATERIALS AND METHODS: A retrospective analysis of 25 patients treated with ante-grade intramedullary titanium elastic nailing was done during the period of August 2014 to June 2016 at our tertiary care centre. Skeletally mature patients with closed and acute fractures of the upper and middle shaft humerus of both sexes were included in the study. RESULTS: Twenty-five (100% fractures united with an average consolidation time of 14.98 weeks (10-32 weeks, and no fractures ended in non-union. Nail impingement was seen in two (8%, shoulder stiffness in one (4%. Functional results were excellent in 22 (88%, moderate in two (8% and poor in one (4%. There were 17 males and eight females with an average age of 39.08 years (range: 18-65 years. The average duration of hospital stay was 3.84±2.30 days. CONCLUSION: Closed ante-grade intramedullary titanium elastic nailing offers a safe and reliable method of fixing fractures of upper humeral shaft in adults. This method provides early fracture union, high union rates and less complications, in addition to early rehabilitation and reduces the hospital stay.

  5. Effects of third fragment size and displacement on non-union of femoral shaft fractures after locking for intramedullary nailing.

    Science.gov (United States)

    Lee, J R; Kim, H-J; Lee, K-B

    2016-04-01

    femoral shaft fractures with fragments 8cm or longer or when the displacement in the proximal area is 20mm or greater and 10mm or greater in the distal area during the intramedullary nailing procedure. Regarding union rate, the degree of displacement has more influence than the third fragment size in femoral shaft fractures. IV, retrospective cohort study. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  6. Staged protocol for the treatment of chronic femoral shaft osteomyelitis with Ilizarov's technique followed by the use of intramedullary locked nail.

    Science.gov (United States)

    Chou, Po-Hsin; Lin, Hsi-Hsien; Su, Yu-Pin; Chiang, Chao-Ching; Chang, Ming-Chau; Chen, Chuan-Mu

    2017-06-01

    Infected nonunion of the femoral shaft is uncommon, and usually presents with challenging therapeutic and reconstructive problems. There are still controversies over treating infected nonunion of the femoral shaft. The purposes of this retrospective study were to review the treatment outcomes and describe a staged protocol for spontaneous wound healing. Six patients with chronic femoral shaft infected-nonunion from October 2002 to September 2010 were included in this retrospective study. Serial plain films and triple films of lower legs were performed to evaluate the alignment of the treated femoral shaft and bony union following our staged protocol of Ilizarov distraction osteogenesis and intramedullary nailing. An average bone defect of 7 cm was noted after staged osteotomy. Mean follow-up was 87.5 (range, 38-133) months. Union was achieved in all six patients, with an average external fixation time of 6.8 (range, 5-11) months. There was no reinfection. One complication of a 4-cm leg discrepancy was noted, with an initial shortening of 15 cm. The mean knee ranges of motion (ROM) before staged protocols and at final follow-up were 64.2±8.6 (range, 60-75)° and 53.3±9.3 (range, 40-65)°, respectively. The ROM at the knee joint statistically decreased following staged protocols. In the treatment of chronic femur osteomyelitis, the staged protocol of Ilizarov distraction osteogenesis followed by intramedullary nailing was safe and successful, and allowed for union, realignment, reorientation, and leg-length restoration. With regard to the soft tissue, this technique provides a unique type of reconstructive closure for infected wounds. It is suggested that the staged protocol is reliable in providing successful simultaneous reconstruction for bone and soft tissue defects without flap coverage. Copyright © 2017. Published by Elsevier Taiwan LLC.

  7. Utilization of the bicipital groove axis for confirming alignment of the humerus with transepicondylar and ulnar shaft axes during intramedullary nailing.

    Science.gov (United States)

    Meriç, Gökhan; Zeybek, Gülşah; Kıray, Amaç; Atik, Aziz; Budeyri, Aydın; Koşay, Can

    2015-01-01

    Intramedullary nailing is the preferred surgical treatment of humerus shaft fractures. The purpose of this study was to investigate the relationship between the bicipital groove and specific anatomical landmarks in achieving correct alignment of the humerus during intramedullary nailing, and to describe these anatomical landmarks. Thirty (15 right; 15 left) total upper cadaver extremities were used in this study. After the anatomical landmarks were identified and marked, humeral head axis, transepicondylar axis, ulnar shaft axis, bicipital groove axis, and angular measurements of these were obtained. The mean angle between the bicipital groove axis and transepicondylar axis was 48.17°±12.35º (range: 20.10º to 74.6º). The mean angle between the bicipital groove axis and ulna diaphysis axis was 41.82º±11.56 º (range: 17.91º to 68.27º). The mean angle between the humeral head axis and bicipital groove axis was 20.53°±3.90º (range: 11.85º to 31.81º). The mean retroversion angle between the humeral head axis and transepicondylar axis was 27.52±11.37º (range: 4.26º to 49.36º). The mean angle between the humeral head axis and ulna diaphysis axis was 61.73º±12.08º (range: 33.97º to 86.37º). The mean torsion angle was 62.58º±11.28 º (range: 40.74º to 85.74º). Measurement and utilization of the relationship between the bicipital groove, ulna diaphysis and transepicondylar axes may be used for restoring humeral rotation.

  8. Management of Nonunited Talar Fractures With Avascular Necrosis by Resection of Necrotic Bone, Bone Grafting, and Fusion With an Intramedullary Nail.

    Science.gov (United States)

    Abd-Ella, Mohamed Mokhtar; Galhoum, Ahmed; Abdelrahman, Amr Farouk; Walther, Markus

    2017-08-01

    The presence of nonunion of a talar fracture with displacement, together with complete avascular necrosis, is a challenging entity to treat. Twelve patients, 8 men (66.7%) and 4 women (33.3%), with nonunited talar fractures and extensive avascular necrosis of the talus were included. The average age was 27.7 years (range, 19-38 years). After exclusion of infection, the patients underwent resection of necrotic bone, bulk autograft, and fusion using an intramedullary nail. The posterior approach was used in 11 patients and the anterior approach in 1 patient. The primary outcome was solid osseous union at the ankle and subtalar level and between the talar head anteriorly and the posterior construct, as evidenced by computed tomographic examination. Functional assessment was performed with the American Orthopaedic Foot & Ankle Society score and subjective patient satisfaction Results: After a mean follow-up duration of 23 months (range, 12-60 months), solid osseous union was achieved in 8 patients (66.7%). Stable fibrous union was seen in 1 patient (8.3%). Three patients (25%) required reoperation, and osseous fusion was finally achieved. American Orthopaedic Foot & Ankle Society score improved from a mean of 39.3 (range, 12-56) preoperatively to 76.6 (range, 62-86) at last follow-up. Subjective patient satisfaction was graded good or excellent in all cases. Resection of necrotic talar body and bulk autograft with tibiotalocalcaneal fusion by an intramedullary nail through a posterior approach was a reasonable option for the management of type IV posttraumatic talar deformity. Level IV, case series.

  9. Subtrochanteric Femoral Fracture during Trochanteric Nailing for the Treatment of Femoral Shaft Fracture

    OpenAIRE

    Yun, Ho Hyun; Oh, Chi Hun; Yi, Ju Won

    2013-01-01

    We report on three cases of subtrochanteric femoral fractures during trochanteric intramedullary nailing for the treatment of femoral shaft fractures. Trochanteric intramedullary nails, which have a proximal lateral bend, are specifically designed for trochanteric insertion. When combined with the modified insertion technique, trochanteric intramedullary nails reduce iatrogenic fracture comminution and varus malalignment. We herein describe technical aspects of trochanteric intramedullary nai...

  10. Revision of a nonunited subtrochanteric femoral fracture around a failed intramedullary nail with the use of RIA products, BMP-7 and hydroxyapatite: a case report

    Directory of Open Access Journals (Sweden)

    Tsiridis Eleftherios

    2011-03-01

    Full Text Available Abstract Introduction Femoral subtrochanteric fractures are commonly treated using intramedullary devices. Failure of the implant and subsequent nonunion is still an issue, however, and limited evidence exists regarding the most appropriate treatment. Case presentation We report the case of an 80-year-old Caucasian woman with a subtrochanteric fracture originally treated using a trochanteric gamma nail which failed, resulting in a nonunion and fracture of its proximal end. The nonunion was revised with the removal of the broken trochanteric gamma nail, application of a condylar blade plate, ipsilateral Reamer/Irrigator/Aspirator autografting, recombinant human bone morphogenetic protein-7 and injectable hydroxyapatite cement. The fracture united fully at ten months following revision surgery, with no signs of femoral head avascular necrosis at 18-month follow-up. Conclusion The essential requirements for success when revising a nonunited fracture are to provide anatomical reduction, mechanical stability, bone defect augmentation and biological stimulation to achieve healing. Current advances in molecular biology, such as recombinant human bone morphogenetic protein-7, and biotechnology such as the Reamer/Irrigator/Aspirator system and hydroxyapatite injectable cement can improve patient outcomes over the use of our traditional revision techniques.

  11. Intramedullary nails versus sliding hip screws for AO/OTA 31-A2 trochanteric fractures in adults: A meta-analysis.

    Science.gov (United States)

    Zhu, Qianzheng; Xu, Xiaodong; Yang, Xi; Chen, Xingzuo; Wang, Liqiang; Liu, Chenggang; Lin, Peng

    2017-07-01

    The optimum treatment with intramedullary nails (IMN) or sliding hip screws (SHS) for type 31-A2 trochanteric fractures remains controversial. Therefore, we performed a meta-analysis of randomized controlled trials (RCTs) to compare IMN with SHS in AO/OTA 31-A2 trochanteric fractures. Databases including PubMed, Cochrane, and Embase were searched to identify RCTs published before December 2016, which compared IMN with SHS for intraoperative and postoperative outcomes in AO/OTA 31-A2 trochanteric fractures. A total of 909 patients from six RCTs were subjected to the meta-analysis. The results showed that the IMN group was associated with less operative blood loss, leg shortening, wound infections, length of hospital stay, and days to mobilization with walking aids and also yielded a higher Parker score as compared to the SHS group. No significant difference was seen in the other parameters including operative details, fracture fixation complications, postoperative complications, and 1 year mortality. IMN fixation was found to be the superior treatment of choice for 31-A2 trochanteric fractures as compared with SHS fixation in our meta-analysis. The adverse effects appeared comparable between the two groups. However, due to the variations in the included studies, more large-sample, measures-unified, and high-quality RCTs are needed to validate these conclusions. Copyright © 2017. Published by Elsevier Ltd.

  12. Elastic stable intramedullary nailing of femoral shaft fractures in children: Particularities and results at Sylvanus Olympio teaching hospital of Lomé, Togo

    Directory of Open Access Journals (Sweden)

    Akakpo-Numado Gamedzi Komlatsè

    2014-01-01

    Full Text Available Introduction: The elastic stable intramedullary nailing (ESIN presently seems the best technique in the surgical treatment of femoral shaft fractures (FSF in >6-year-old children. We hereby report technical difficulties and therapeutic results after our first 8 years of experience. Patients and Methods: It′s a retrospective study over a period of 8 years from January 2005 to December 2012 in the Paediatric Surgery Department of Sylvanus Olympio Teaching Hospital of Lomé. Indications, technical particularities and results were studied. Results: There were 32 patients, 17 were boys and 15 were girls, with a mean age of 11 years old. The mean time to surgery was 21 days (range: 14 and 51 days. A callus was always removed before reduction. The osteosynthesis was stable in 22 cases, but in 10 others, it had been completed with a cast immobilisation. The operation needed a blood transfusion in 18 cases. With a mean follow-up of 3.5 years, the results were excellent in 29 patients (90.63% and good in 3 patients (9.37%. Conclusion: Although undertaking an ESIN can be difficult, due to the lack of adequate equipment the procedure produces satisfactory outcome.

  13. Subtrochanteric femoral fracture during trochanteric nailing for the treatment of femoral shaft fracture.

    Science.gov (United States)

    Yun, Ho Hyun; Oh, Chi Hun; Yi, Ju Won

    2013-09-01

    We report on three cases of subtrochanteric femoral fractures during trochanteric intramedullary nailing for the treatment of femoral shaft fractures. Trochanteric intramedullary nails, which have a proximal lateral bend, are specifically designed for trochanteric insertion. When combined with the modified insertion technique, trochanteric intramedullary nails reduce iatrogenic fracture comminution and varus malalignment. We herein describe technical aspects of trochanteric intramedullary nailing for femoral shaft fractures to improve its application and prevent implant-derived complications.

  14. Immediate versus delayed intramedullary nailing for open fractures of the tibial shaft: a multivariate analysis of factors affecting deep infection and fracture healing.

    Science.gov (United States)

    Yokoyama, Kazuhiko; Itoman, Moritoshi; Uchino, Masataka; Fukushima, Kensuke; Nitta, Hiroshi; Kojima, Yoshiaki

    2008-10-01

    The purpose of this study was to evaluate contributing factors affecting deep infection and fracture healing of open tibia fractures treated with locked intramedullary nailing (IMN) by multivariate analysis. We examined 99 open tibial fractures (98 patients) treated with immediate or delayed locked IMN in static fashion from 1991 to 2002. Multivariate analyses following univariate analyses were derived to determine predictors of deep infection, nonunion, and healing time to union. The following predictive variables of deep infection were selected for analysis: age, sex, Gustilo type, fracture grade by AO type, fracture location, timing or method of IMN, reamed or unreamed nailing, debridement time (6 h), method of soft-tissue management, skin closure time (1 week), existence of polytrauma (ISS or =18), existence of floating knee injury, and existence of superficial/pin site infection. The predictive variables of nonunion selected for analysis was the same as those for deep infection, with the addition of deep infection for exchange of pin site infection. The predictive variables of union time selected for analysis was the same as those for nonunion, excluding of location, debridement time, and existence of floating knee and superficial infection. Six (6.1%; type II Gustilo n=1, type IIIB Gustilo n=5) of the 99 open tibial fractures developed deep infections. Multivariate analysis revealed that timing or method of IMN, debridement time, method of soft-tissue management, and existence of superficial or pin site infection significantly correlated with the occurrence of deep infection (Prate in type IIIB + IIIC was significantly higher than those in type I + II and IIIA (P = 0.016). Nonunion occurred in 17 fractures (20.3%, 17/84). Multivariate analysis revealed that Gustilo type, skin closure time, and existence of deep infection significantly correlated with occurrence of nonunion (P < 0.05). Gustilo type and existence of deep infection were significantly correlated

  15. Intramedullary nailing of femoral shaft fractures in polytraumatized patients. a longitudinal, prospective and observational study of the procedure-related impact on cardiopulmonary- and inflammatory responses

    Directory of Open Access Journals (Sweden)

    Husebye Elisabeth E

    2012-01-01

    Full Text Available Abstract Background Early intramedullary nailing (IMN of long bone fractures in severely injured patients has been evaluated as beneficial, but has also been associated with increased inflammation, multi organ failure (MOF and morbidity. This study was initiated to evaluate the impact of primary femoral IMN on coagulation-, fibrinolysis-, inflammatory- and cardiopulmonary responses in polytraumatized patients. Methods Twelve adult polytraumatized patients with femoral shaft fractures were included. Serial blood samples were collected to evaluate coagulation-, fibrinolytic-, and cytokine activation in arterial blood. A flow-directed pulmonary artery (PA catheter was inserted prior to IMN. Cardiopulmonary function parameters were recorded peri- and postoperatively. The clinical course of the patients and complications were monitored and recorded daily. Results Mean Injury Severity Score (ISS was 31 ± 2.6. No procedure-related effect of the primary IMN on coagulation- and fibrinolysis activation was evident. Tumor necrosis factor alpha (TNF-α increased significantly from 6 hours post procedure to peak levels on the third postoperative day. Interleukin-6 (IL-6 increased from the first to the third postoperative day. Interleukin-10 (IL-10 peaked on the first postoperative day. A procedure-related transient hemodynamic response was observed on indexed pulmonary vascular resistance (PVRI two hours post procedure. 11/12 patients developed systemic inflammatory response syndrome (SIRS, 7/12 pneumonia, 3/12 acute lung injury (ALI, 3/12 adult respiratory distress syndrome (ARDS, 3/12 sepsis, 0/12 wound infection. Conclusion In the polytraumatized patients with femoral shaft fractures operated with primary IMN we observed a substantial response related to the initial trauma. We could not demonstrate any major additional IMN-related impact on the inflammatory responses or on the cardiopulmonary function parameters. These results have to be interpreted

  16. Immediate versus delayed intramedullary nailing for open fractures of the tibial shaft: A multivariate analysis of factors affecting deep infection and fracture healing

    Directory of Open Access Journals (Sweden)

    Yokoyama Kazuhiko

    2008-01-01

    Full Text Available Background: The purpose of this study was to evaluate contributing factors affecting deep infection and fracture healing of open tibia fractures treated with locked intramedullary nailing (IMN by multivariate analysis. Materials and Methods: We examined 99 open tibial fractures (98 patients treated with immediate or delayed locked IMN in static fashion from 1991 to 2002. Multivariate analyses following univariate analyses were derived to determine predictors of deep infection, nonunion, and healing time to union. The following predictive variables of deep infection were selected for analysis: age, sex, Gustilo type, fracture grade by AO type, fracture location, timing or method of IMN, reamed or unreamed nailing, debridement time (≤6 h or> 6 h, method of soft-tissue management, skin closure time (≤1 week or> 1 week, existence of polytrauma (ISS< 18 or ISS≥18, existence of floating knee injury, and existence of superficial/pin site infection. The predictive variables of nonunion selected for analysis was the same as those for deep infection, with the addition of deep infection for exchange of pin site infection. The predictive variables of union time selected for analysis was the same as those for nonunion, excluding of location, debridement time, and existence of floating knee and superficial infection. Results: Six (6.1%; type II Gustilo n=1, type IIIB Gustilo n=5 of the 99 open tibial fractures developed deep infections. Multivariate analysis revealed that timing or method of IMN, debridement time, method of soft-tissue management, and existence of superficial or pin site infection significantly correlated with the occurrence of deep infection ( P < 0.0001. In the immediate nailing group alone, the deep infection rate in type IIIB + IIIC was significantly higher than those in type I + II and IIIA ( P = 0.016. Nonunion occurred in 17 fractures (20.3%, 17/84. Multivariate analysis revealed that Gustilo type, skin closure time, and

  17. Avaliação do uso de haste bloqueada e bloqueio transcortical no reparo de fraturas diafisárias de fêmur em felinos Evaluation of the use of interlocking nail and transcortical blockade for the repair of diaphyseal fractures of the femur in cats

    Directory of Open Access Journals (Sweden)

    Leandro Romano

    2008-04-01

    fracture stabilization and present biomechanical advantages when compared to other immobilization techniques. It acts along the central mechanical axis of the bone and preserves biological concept standards for osteosynthesis. The use of interlocking nail in cats is limited because the intramedullary space is relatively small for the available nail sizes. We reported 10 cases of cats that had simple or multiple closed fractures of the femoral diaphysis. The animals weighed 3.5 to 5 kg , which allowed using nails of 4.0mm and 4.7mm in diameter. For the nail insertion, retrograde and normograde routs were used, and four 2mm titanium screws were used to lock all the perforations. No trans-surgical complication occurred, however, due to a new trauma, one of the animals suffered femoral neck fracture and transversal distal fracture to the nail, three days after surgery. Radiographies were made up to four months after surgery, and in most cases secondary bone formation was seen, showing bone consolidation in 61-89 days, excluding the animal who suffered new trauma, who presented bone healing in 150 days. Clinically, occasional lameness occurred; however, except for the animal that had new trauma, all animals initiated adequate limb support in 3 to 8 days after surgery. In conclusion, the use of 4.0mm and 4.7mm interlocking nails in felines was adequate, with bone healing in all cases, and also return of good limb function after surgery.

  18. Effectiveness of plate augmentation for femoral shaft nonunion after nailing

    Directory of Open Access Journals (Sweden)

    Chin-Jung Lin

    2012-08-01

    Conclusion: Plate augmentation with retention of the nail with autologous bone grafting may be an effective and reliable alternative in treating nonunion of the femoral shaft fracture after open reduction and internal fixation with intramedullary nail.

  19. [Intramedullary stabilisation of clavicula fractures].

    Science.gov (United States)

    Prokop, A; Schiffer, G; Jubel, A; Chmielnicki, M

    2013-10-01

    With an incidence of 64/100,000, clavicular shaft fractures are one of the most common fractures. Intramedullary fixation with Prevot nails was initially reported in the late 1990s. This procedure offers minimally invasive stabilization of the fracture, thus enabling immediate mobilization and rapid loading capacity. Using a case study, the positioning and procedure are demonstrated on video. The intramedullary implant accommodates the varying tension loading of the clavicle. This treatment is ideal for clavicular fractures with 2-3 fragments. Compared to patients treated conservatively, operated patients achieve more rapid and improved mobility. Employment disability is shorter, and malunion occurs less frequently. Georg Thieme Verlag KG Stuttgart · New York.

  20. Intramedullary femoral nailing through the trochanteric fossa versus greater trochanter tip : a randomized controlled study with in-depth functional outcome results

    NARCIS (Netherlands)

    Moein, C. M. Ansari; ten Duis, H. J.; Oey, P. L.; de Kort, G. A. P.; van der Meulen, W.; van der Werken, Chr

    2011-01-01

    In a level 1 university trauma center, an explorative randomized controlled study was performed to compare soft tissue damage and functional outcome after antegrade femoral nailing through a trochanteric fossa (also known as piriform fossa) entry point to a greater trochanter entry point in patients

  1. Current indications for open Kuntscher nailing of femoral shaft ...

    African Journals Online (AJOL)

    Current indications for open Kuntscher nailing of femoral shaft fractures. A S Bajwa FCS(SA)ORTH. E Schnaid FCS(SA)ORTH. M E B Sweet MD PhD(rned). University of Witwatersrand, Johannesburg, South Africa. Key Words: Kuntscher nail, intramedullary nail, femoral fracture. We retrospectively reviewed 32 patients with.

  2. Retained portion of latex glove during femoral nailing. Case report.

    Science.gov (United States)

    Sadat-Ali, M; Marwah, S; al-Habdan, I

    1996-11-01

    A case of retained glove during Kuntscher intramedullary nailing is described. An abscess around the glove could have lead to osteomyelitis. One need to be cautious feeling the top end of the nail while femoral nailing to avoid such a complication.

  3. Reinforcing the role of the conventional C-arm - a novel method for simplified distal interlocking

    Directory of Open Access Journals (Sweden)

    Windolf Markus

    2012-01-01

    Full Text Available Abstract Background The common practice for insertion of distal locking screws of intramedullary nails is a freehand technique under fluoroscopic control. The process is technically demanding, time-consuming and afflicted to considerable radiation exposure of the patient and the surgical personnel. A new concept is introduced utilizing information from within conventional radiographic images to help accurately guide the surgeon to place the interlocking bolt into the interlocking hole. The newly developed technique was compared to conventional freehand in an operating room (OR like setting on human cadaveric lower legs in terms of operating time and radiation exposure. Methods The proposed concept (guided freehand, generally based on the freehand gold standard, additionally guides the surgeon by means of visible landmarks projected into the C-arm image. A computer program plans the correct drilling trajectory by processing the lens-shaped hole projections of the interlocking holes from a single image. Holes can be drilled by visually aligning the drill to the planned trajectory. Besides a conventional C-arm, no additional tracking or navigation equipment is required. Ten fresh frozen human below-knee specimens were instrumented with an Expert Tibial Nail (Synthes GmbH, Switzerland. The implants were distally locked by performing the newly proposed technique as well as the conventional freehand technique on each specimen. An orthopedic resident surgeon inserted four distal screws per procedure. Operating time, number of images and radiation time were recorded and statistically compared between interlocking techniques using non-parametric tests. Results A 58% reduction in number of taken images per screw was found for the guided freehand technique (7.4 ± 3.4 (mean ± SD compared to the freehand technique (17.6 ± 10.3 (p p = 0.001. Operating time per screw (from first shot to screw tightened was on average 22% reduced by guided freehand (p = 0

  4. Reinforcing the role of the conventional C-arm--a novel method for simplified distal interlocking.

    Science.gov (United States)

    Windolf, Markus; Schroeder, Josh; Fliri, Ladina; Dicht, Benno; Liebergall, Meir; Richards, R Geoff

    2012-01-25

    The common practice for insertion of distal locking screws of intramedullary nails is a freehand technique under fluoroscopic control. The process is technically demanding, time-consuming and afflicted to considerable radiation exposure of the patient and the surgical personnel. A new concept is introduced utilizing information from within conventional radiographic images to help accurately guide the surgeon to place the interlocking bolt into the interlocking hole. The newly developed technique was compared to conventional freehand in an operating room (OR) like setting on human cadaveric lower legs in terms of operating time and radiation exposure. The proposed concept (guided freehand), generally based on the freehand gold standard, additionally guides the surgeon by means of visible landmarks projected into the C-arm image. A computer program plans the correct drilling trajectory by processing the lens-shaped hole projections of the interlocking holes from a single image. Holes can be drilled by visually aligning the drill to the planned trajectory. Besides a conventional C-arm, no additional tracking or navigation equipment is required.Ten fresh frozen human below-knee specimens were instrumented with an Expert Tibial Nail (Synthes GmbH, Switzerland). The implants were distally locked by performing the newly proposed technique as well as the conventional freehand technique on each specimen. An orthopedic resident surgeon inserted four distal screws per procedure. Operating time, number of images and radiation time were recorded and statistically compared between interlocking techniques using non-parametric tests. A 58% reduction in number of taken images per screw was found for the guided freehand technique (7.4 ± 3.4) (mean ± SD) compared to the freehand technique (17.6 ± 10.3) (p < 0.001). Total radiation time (all 4 screws) was 55% lower for the guided freehand technique compared to conventional freehand (p = 0.001). Operating time per screw (from first

  5. Is the lag screw sliding effective in the intramedullary nailing in A1 and A2 AO-OTA intertrochanteric fractures? A prospective study of Sliding and None-sliding lag screw in Gamma-III nail

    Directory of Open Access Journals (Sweden)

    Zhu Yi

    2012-09-01

    Full Text Available Abstract Object To compare the Sliding with Non-sliding lag screw of a gamma nail in the treatment of A1 and A2 AO-OTA intertrochanteric fractures. Materials and methods 80 patients were prospectively collected. In each group, AO/OTA 31-A were classified into group A. AO/OTA 31-A2.1 was classified as group B. We classified the A2.2 and A2.3 as group C. According to the set-screw locking formation of Gamma-III, the cases were randomly allocated to Sliding subgroup and Non-sliding subgroup in A, B and C groups. Follow-ups were performed 1, 3, 6 and 12 months postoperatively. Results In the Sliding group, the bone healing rate 3, 6, 12 months postoperatively reached 85.00%, 97.50%, 100% in group A, B and C. Meanwhile, in Non-sliding group, postoperatively, bone healing rate were 90.00%, 95.00% and 97.50% in group A, B and C, respectively. Both differences were not significant. Lower limb discrepancy between Sliding and Non-sliding pattern was significantly different in group C which represent fracture types of AO/OTA 31-A2.2 and A2.3 (0.573 ± 0.019 mm in Non-sliding group, 0.955 mm ± 0.024 mm in Sliding group, P Conclusions As a result, we can conclude that the sliding distance is minimal in Gamma nails and it is related to the comminuted extent of the intertrochanteric area in A1 and A2 AO-OTA intertrochanteric fractures. For treating these kinds of fractures, the sliding of the lag screw of an Gamma nail does not improve any clinical results and in certain cases, such as highly comminuted A1 and A2 fractures, can therefore even benefit from a locked lag screw by tightening the set-screw.

  6. Intramedullary fixation of proximal humerus fractures: do locking bolts endanger the axillary nerve or the ascending branch of the anterior circumflex artery? A cadaveric study

    Directory of Open Access Journals (Sweden)

    Sermon An

    2008-12-01

    Full Text Available Abstract Background Proximal humerus fractures are one of the most common fractures. Intramedullary locked nailing is becoming a popular alternative treatment, especially for easier fracture patterns. Although axillary nerve injury has been reported, no study has compared the safety of the proximal locking options relative to the axillary nerve and the ascending branch of the anterior circumflex artery. Method Six different commercially available proximal humeral nails were implanted in 30 shoulders of 18 cadavers. After fluoroscopically guided implantation the shoulders were carefully dissected and the distance between the locking screws, the axillary nerve and the ascending branch of the anterior circumflex artery was measured. Results The course of the axillary nerve varies. A mean distance of 55.8 mm (SD = 5.3 between the lateral edge of the acromions and the axillary nerve at the middle of the humerus in a neutrally rotated position was observed. The minimum distance was 43.4 mm, the maximum 63.9 mm. Bent nails with oblique head interlocking bolts appeared to be the most dangerous in relation to the axillary nerve. The two designs featuring such a bend and oblique bolt showed a mean distance of the locking screw to the axillary nerve of 1 mm and 2.7 mm respectively Sirus (Zimmer® and (Stryker® T2 PHN (Proximal Humeral Nail. Regarding the ascending branch of the anterior circumflex artery, there was no difference between the nails which have an anteroposterior locking option. Conclusion It is of great importance for surgeons treating proximal humerus fractures to understand the relative risk of any procedure they perform. Since the designs of different nailing systems risk damaging the axillary nerve and ascending branch, blunt dissection, the use of protection sleeves during drilling and screw insertion, and individual risk evaluation prior to the use of a proximal humeral nail are advocated.

  7. Exposure of surgeons-in-training to radiation during intramedullary fixation of femoral shaft fractures

    International Nuclear Information System (INIS)

    Coetzee, J.C.; Van der Merwe, E.J.

    1992-01-01

    Owing to the continuous turnover of registrars and radiographers, most of the trauma-related orthopedic surgery in this academic hospital is done by inexperienced surgeons-in-training and the fluoroscopy by junior radiographers. This could result in excessive radiation doses. Calibrated lithium fluoride thermoluminescent chips were secured to various parts of the primary surgeon's body to quantify the radiation dose received during the insertion of an intramedullary nail. Closed intramedullary fixation of 15 fractures of the femur was done with interlocking as necessary. The total average exposure time was 14 minutes 45 seconds per procedure. Distal locking took up 31% of this time. The mean radiation dose to the surgeon's eyes and thyroid was 0,13 mGy and to the dominant hand 2,10 mGy. This would allow the performance of about 350 such procedures per year before the maximum permissible dose level was reached. Recommendations to decrease irradiation dosage are made. 6 refs., 6 tabs

  8. Tibiocalcaneal Arthrodesis With a Porous Tantalum Spacer and Locked Intramedullary Nail for Post-Traumatic Global Avascular Necrosis of the Talus.

    Science.gov (United States)

    Cohen, Michael M; Kazak, Marat

    2015-01-01

    Global avascular necrosis of the talus is a devastating complication that usually occurs as a result of a post-traumatic or metabolic etiology. When conservative options fail, tibiocalcaneal arthrodesis is generally indicated in conjunction with massive bone grafting to maintain the functional length of the extremity. Several bone grafting options are available, including the use of a freeze-dried or fresh-frozen femoral head allograft or autograft obtained from the iliac crest or fibula, all of which pose their own inherent risks. The noted complications with massive bone grafting techniques have included graft collapse, infection, immune response, donor site morbidity, and nonunion. In an effort to avoid many of these complications, we present a case report involving post-traumatic talar avascular necrosis in a 59-year-old male who was successfully treated with the use of a porous tantalum spacer, an autogenic morselized fibular bone graft, and 30 mL of bone marrow aspirate in conjunction with a retrograde tibiocalcaneal nail. Porous tantalum is an attractive substitute for bone grafting because of its structural integrity, biocompatibility, avoidance of donor site complications, and lack of an immune response. The successful use of porous tantalum has been well-documented in hip and knee surgery. We present a practical surgical approach to tibiotalocalcaneal arthrodesis with a large segmental deficit. To our knowledge, this is the first published report describing an alternative surgical technique to address global avascular necrosis of the talus that could have additional applications in salvaging the ankle with a large bone deficiency. Copyright © 2015 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

  9. Nail cosmetics

    Directory of Open Access Journals (Sweden)

    Nina A Madnani

    2012-01-01

    Full Text Available The nail as an anatomic structure protects the terminal phalanx of the digit from injury. Historically, it has served as a tool for protection and for survival. As civilizations developed, it attained the additional function of adornment. Nail beautification is a big industry today, with various nail cosmetics available, ranging from nail hardeners, polishes, extensions, artificial/sculpted nails, and nail decorations. Adverse events may occur either during the nail-grooming procedure or as a reaction to the individual components of the nail cosmetics. This holds true for both the client and the nail technician. Typically, any of the procedures involves several steps and a series of products. Separate "nail-bars" have been set up dedicated to serve women and men interested in nail beautification. This article attempts to comprehensively inform and educate the dermatologist on the services offered, the products used, and the possible/potential adverse effects related to nail-grooming and nail cosmetics.

  10. Nail cosmetics.

    Science.gov (United States)

    Madnani, Nina A; Khan, Kaleem J

    2012-01-01

    The nail as an anatomic structure protects the terminal phalanx of the digit from injury. Historically, it has served as a tool for protection and for survival. As civilizations developed, it attained the additional function of adornment. Nail beautification is a big industry today, with various nail cosmetics available, ranging from nail hardeners, polishes, extensions, artificial/sculpted nails, and nail decorations. Adverse events may occur either during the nail-grooming procedure or as a reaction to the individual components of the nail cosmetics. This holds true for both the client and the nail technician. Typically, any of the procedures involves several steps and a series of products. Separate "nail-bars" have been set up dedicated to serve women and men interested in nail beautification. This article attempts to comprehensively inform and educate the dermatologist on the services offered, the products used, and the possible/potential adverse effects related to nail-grooming and nail cosmetics.

  11. Dispositivo de tração do membro superior para osteossínteses intramedulares bloqueadas anterógradas de fraturas diafisárias de úmero Upper limb traction device for anterograde intramedullary locked nail of humeral shaft fractures

    Directory of Open Access Journals (Sweden)

    Mário Chaves Corrêa

    2010-06-01

    surgically, usually by means of intramedullary locked nail. Some comminuted and/or very deviated shaft fractures can represent a real technical challenge. The fracture table, which allows for the vertical, horizontal and rotational instrumental stabilization of the limb, greatly facilitates reduction and implant placement maneuvers and are widely used by orthopedic surgeons. Humeral shaft fractures are mostly treated nonsurgically. However, some whose indications are well defined in literature require surgical treatment. They can be fixed by plates, or by anterograde or retrograde intramedullary nail. In the humerus, limb fracture reduction and stabilization maneuvers for implantation of intramedullary nails are done manually, usually by 2 assistants. Because they are subject to muscle fatigue, this option may be less efficient. The aim of this paper is to present an external traction device for use in anterograde intramedullary fixation of humerus shaft fractures that allows vertical, horizontal and rotational stabilization of the upper limb similarly to that used in the lower limbs. The device is portable, of simple construction, and can be installed on any operating table equipped with side rails. It was used in the surgical treatment of 29 humeral shaft fractures with anterograde locked intramedullary nail. Our experience was extremely positive. We had no complications related to its use and we believe it to have facilitated the surgical procedures in a remarkable way.

  12. Biodegradable interlocking nails for fracture fixation

    NARCIS (Netherlands)

    van der Elst, M.; Bramer, J. A.; Klein, C. P.; de Lange, E. S.; Patka, P.; Haarman, H. J.

    1998-01-01

    Serious problems such as stress shielding, allergic reactions, and corrosion are associated with the use of metallic fracture fixation devices in fractured long bones. Metal implants often are removed during a second retrieval operation after fracture healing has completed. A biocompatible implant

  13. Endomedullar nail of metacarpal and proximal phalanges

    International Nuclear Information System (INIS)

    Mendez Olaya, Francisco Javier; Sanchez Mesa, Pedro Antonio

    2002-01-01

    Prospective study, series of cases; it included patients with diaphysis fractures and union diaphysis-neck or union diaphysis-base of metacarpal and proximal phalanges, in whom was practiced anterograde intramedullary nailing previous closed reduction of the fracture, using prevent intramedullary nail of 1.6 mm. (cem 16) for the metacarpal fractures, and two nail prevent of 1.0 mm. (cem 10) for the proximal phalangeal fractures. Indications: transverse and oblique short fractures, spiral and with comminuting bicortical. Pursuit average is 5.7 months. Frequency surgical intervened patient: 2.2 each month, using this surgical technique a total of 20 (twenty) patients have been operated, 21 (twenty one) fractures; 16 (sixteen) metacarcal fractures and 5 (five) proximal phalangeal fractures, all of them tested using clinical and radiological parameters. Results: good 82%, regular 18%, and bad 0% obtaining bony consolidation and early rehabilitation with incorporation to their habitual works

  14. Treatment of unstable trochanteric fractures. Randomised comparison of the gamma nail and the proximal femoral nail.

    NARCIS (Netherlands)

    Schipper, I.B.; Steyerberg, E.W.; Castelein, R.M.; Heijden, F.H. van der; Hoed, P.T. den; Kerver, A.J.; Vugt, A.B. van

    2004-01-01

    The proximal femoral nail (PFN) is a recently introduced intramedullary system, designed to improve treatment of unstable trochanteric fractures of the hip. In a multicentre prospective clinical study, the intra-operative use, complications and outcome of treatment using the PFN (n = 211) were

  15. Sistemas osso-implante ex vivo utilizando haste intramedular polimérica para imobilização de fraturas femorais em bovinos jovens Ex vivo bone-implant systems using polymeric intramedullary nails for fixation of femoral fractures in young calves

    Directory of Open Access Journals (Sweden)

    Odael Spadeto Junior

    2011-02-01

    Full Text Available O desenvolvimento de novos aparatos usando materiais disponíveis e de baixo custo pode ser uma alternativa viável para o tratamento cirúrgico de fraturas em ossos longos de bovinos. O objetivo deste estudo foi avaliar a resistência mecânica de fêmures de bovinos jovens com fratura diafiseal, imobilizados com hastes intramedulares bloqueadas, compostas por diferentes polímeros. Para tanto, testes físicos de compressão e flexão, por meio de uma máquina universal de ensaios foram realizados em quatro grupos distintos de seis fêmures obtidos de bovinos jovens. Em um dos grupos, os ossos foram mantidos íntegros (grupo controle, enquanto que os outros os ossos, foram fraturados e imobilizados com uma haste intramedular bloqueada, composta por polipropileno, poliacetal ou poliamida (uma para cada grupo. Independente do polímero utilizado, nenhuma das hastes estudadas ofereceu aos fêmures fraturados resistência comparável ao osso íntegro, quando consideradas em conjunto as forças de flexão e compressão. A concordância desses achados com resultados in vivo previamente publicados, demonstra que a metodologia utilizada para testes ex vivo pode ser útil na seleção de materiais mais resistentes para confecção de novos modelos.The development of new devices using available and low cost materials may be an useful alternative for the treatment of long bone fractures in large animals. The aim of this study was to evaluate the mechanical strength of young bovine femur with diaphyseal fracture fixed with different polymeric intramedullary nails. Bending and compression tests using a universal machine were carried out in 4 distinct groups of 6 femurs from young calves. In one of the groups bones were intact while in the other three fractured bones were fixed using an intramedullary nail made of polypropylene, polyacetal or polyamide (one for each group. Considering bending and compression tests together, none of the used polymers offered

  16. Treatment of pediatric femoral shaft fractures by stainless steel and titanium elastic nail system: A randomized comparative trial

    Directory of Open Access Journals (Sweden)

    Tank Gyaneshwar

    2016-08-01

    Conclusion: Majority of paediatric femoral shaft fractures are now treated operatively by elastic stable intramedullary nails. Operative intervention results in a shorter hospital stay and has economic and social benefits over conservative treatment. The cost of stainless steel nail is one third the cost of titanium nail. However, the clinico-radiological results are not significantly different between titanium and stainless steel nails at one year follow-up as observed by our study.

  17. Intramedullary capillary haemangioma.

    LENUS (Irish Health Repository)

    Kelleher, T

    2012-02-03

    Intramedullary capillary haemangioma is extremely rare and only four cases have been previously reported. We describe a further case, outlining the clinical, radiological, surgical and pathological features.

  18. Comparing two intramedullary devices for treating trochanteric fractures: A prospective study

    Directory of Open Access Journals (Sweden)

    Kontogeorgakos Vasileios

    2010-02-01

    Full Text Available Abstract Background Intertrochanteric fractures are surgically treated by using different methods and implants. The optional type of surgical stabilization is still under debate. However, between devices with the same philosophy, different design characteristics may substantially influence fracture healing. This is a prospective study comparing the complication and final functional outcome of two intramedullary devices, the intramedullary hip screw (IMHS and the ENDOVIS nail. Materials and methods Two hundred fifteen patients were randomized on admission in two treatment groups. Epidemiology features and functional status was similar between two treatment groups. Fracture stability was assessed according to the Evan's classification. One hundred ten patients were treated with IMHS and 105 with ENDOVIS nail. Results There were no significant statistical differences between the two groups regarding blood loss, transfusion requirements and mortality rate. In contrast, the number of total complications was significantly higher in the ENDOVIS nail group. Moreover, the overall functional and walking competence was superior in the patients treated with the IMHS nail. Conclusions These results indicate that the choice of the proper implant plays probably an important role in the final outcome of surgical treatment of intertrochanteric fractures. IMHS nail allows for accurate surgical technique, for both static and dynamic compression and high rotational stability. IMHS nail proved more reliable in our study regarding nail insertion and overall uncomplicated outcome.

  19. New BEPC interlock system

    International Nuclear Information System (INIS)

    Tang Shuming; Na Xiangyin; Chen Jiansong; Yu Yulan; Cai Guangyu; Wu Jingmin; Li Tiehui

    1998-01-01

    A new interlock system for BEPC (Beijing Electron Positron Collider) has been developed in order to improve the reliability of the personal safety and the subsystem's interlocks. Another role of the system is to update the BEPC TV status screen once every 6 seconds. The hardware for the new interlock system is based on industrial Programmable logic controllers (PLC). By means of the PC-links, the interlock system is composed as a distributed control system. One inexpensive multimedia IBM/486 PC is used as the host computer of the PLCs. The application programs dedicated for the system is written in visual C++ language under Chinese MS-Windows. In case there is a failure in a subsystem, the message is displayed visually, supplemented by a voice message, which causes the operators to pay attention

  20. An in vivo evaluation of surface polishing of TAN intermedullary nails for ease of removal

    Directory of Open Access Journals (Sweden)

    JS Hayes

    2009-09-01

    Full Text Available Fractures of the tibia and femoral diaphysis are commonly repaired by intra-medullary (IM nailing. Currently IM nails are available in either electropolished stainless steel (SS or in Titanium-Aluminium-Niobium (TAN. After healing, removal of the nails still is common but removal of TAN IM nails often has complications whereas SS IM nails of the same design are less often associated with problems. We believe the differences in removal are due to the ability of TAN to promote strong bone on-growth. We have previously shown in vivo that polishing cortical screws reduces removal torque and the percentage of bone-implant contact. Therefore, we postulate that bony on-growth onto IM nails can be reduced by means of surface polishing, for ease of removal. Here we aim to compare the pull-out forces for removal of standard TAN (TAN-S compared to experimental paste polished TAN (TAN-PP IM nails from a bilateral non-fracture sheep tibia model after 12 months implantation. Histological analysis was also performed to assess tissue on-growth to the nails. We show that polishing significantly reduces (p=0.05 the extraction force required for TAN IM nail removal. This effect in part is attributable to the distinct tissue-material reaction produced. For TAN-S nails direct bone contact was observed while for TAN-PP nails a fibrous tissue interface was noted. Since TAN is preferred over SS for IM nailing due to superior biocompatibility and mechanical properties, we believe these findings could be used to recommend changes to current surface technologies of intramedullary nails to reduce complications seen with nail removal especially in rapidly growing bone in children.

  1. Do intramedullary implants improve survival in elderly patients with trochanteric fractures? A retrospective study.

    Science.gov (United States)

    Vermesan, D; Prejbeanu, R; Poenaru, D V; Petrescu, H; Apostol, E; Inchingolo, F; Dipalma, G; Abbinante, A; Caprio, M; Potenza, M A; Cagiano, R; Malcangi, G; Inchingolo, A D; Haragus, H

    2015-01-01

    There is currently no consensus regarding superiority of the intramedullary fixation over the sliding hip screw. Regional variation remains high and not backed up by solid evidence. Given these premises we aimed to analyze weather implant preference can influence the postoperative survival. Secondary objectives were determining the trend for implant choice and confounding factors associated with intramedullary nails compared to sliding hip screws. Retrospective data was obtained from patient charts with the main diagnosis of extracapsular/ trochanteric fractures, corresponding to ICD S72.1 codes. Between 2008-2012, 441 patients underwent osteosynthesis with a dynamic hip screw and 155 with intramedullary nail respectively. The living status was determined by comparing the patient identification number against the national population evidence records. The lifetable shows similar survival for both implants over the 5 year period. The yearly mortality was 19.4% for the dynamic hip screw and 21.8% for the intramedullary implant respectively, even though the later were used predominantly in older patients. This age difference is significant according to both parametric and non-parametric tests whereas duration of hospital stay are similar. We found a clear increase in the proportion of intramedullary implants, for a total of 11.2% over the 5 year period. There is no difference for the one year mortality and overall survival between sliding screw plates and intramedullary constructs. A clear increase in the use of intramedullary implants for trochanteric fractures was observed. This is even more apparent for older ages, presumably due to an higher surgeon confidence with the biomechanical stability of the intramedullary constructs.

  2. Primary malignant intramedullary lymphoma

    International Nuclear Information System (INIS)

    Orrego P, E.; Heinicke Y, H.; Arbaiza A, D.; Yepez R, V.

    1999-01-01

    A case of primary malignant intramedullary lymphoma, localized in the dorsal part of the spinal cord is presented. The clinical symptoms were associated with motor and sensitive deficit. Clinical investigations excluded the presence of lymphoma in other locations in the central nervous system and the extra neural organs. Postoperative radiotherapy and chemotherapy improved relict neurological symptoms. (authors)

  3. Green Nail Syndrome

    Science.gov (United States)

    ... nail is detached from the nail bed, the waterproof seal formed by the skin on the nail ... should also be noted that wearing tight-fitting shoes for a prolonged time, especially while exercising, is ...

  4. Onychomycosis nailed

    Directory of Open Access Journals (Sweden)

    Leelavathi Muthupalaniappen

    2014-04-01

    Full Text Available Fungal infection of the nail is a common condition that causes much concern because of its disfiguring appearance. Although specific treatment is available for this condition, treatment outcome is variable and persistent nail dystrophy post-treatment may cause distress to both the patient and the physician. This article describes the current available treatment options for onychomycosis, management approach and the expected treatment outcome to enhance primary care physicians’ confidence in managing this condition. Oral antifungal agents such as terbinafine and itraconazole are good treatment options for onychomycosis. Combination therapy using oral antifungal agents with topical lacquer preparations may provide added benefits. Evaluation of patient’s expectations, providing information on treatment outcome, clinical cure and recurrence rates are essential in the management of onychomycosis. This article is intended to guide primary care physicians to achieve realistic treatment goals and for a satisfactory experience in the overall management of this challenging condition.

  5. Update on nail cosmetics.

    Science.gov (United States)

    Jefferson, Julie; Rich, Phoebe

    2012-01-01

    Nail cosmetics are used by millions of people worldwide who desire smooth, lustrous nails. The nail cosmetic industry continues to expand to meet increasing consumer demand. In 2011 alone, consumers spent $6.6 billion on nail salon services. Although nail cosmetics are relatively safe, poor application techniques can promote disease, deformity, and allergic and irritant contact dermatitis. The foundation for managing nail cosmetic problems is prevention through education. Familiarity with the procedures and materials used in the nail cosmetic industry is necessary in order to recommend safe nail care strategies. © 2012 Wiley Periodicals, Inc.

  6. Interlocked systems in nanomedicine.

    Science.gov (United States)

    Ornelas-Megiatto, Catia; Becher, Tiago B; Megiatto, Jackson D

    2015-01-01

    The concept of Nanomedicine emerged along with the new millennium, and it is expected to provide solutions to some of modern medicine's unsolved problems. Nanomedicine offers new hopes in several critical areas such as cancer treatment, viral and bacterial infections, medical imaging, tissue regeneration, and theranostics. To explore all these applications, a wide variety of nanomaterials have been developed which include liposomes, dendrimers, nanohydrogels and polymeric, metallic and inorganic nanoparticles. Recently, interlocked systems, namely rotaxanes and catenanes, have been incorporated into some of these chemical platforms in an attempt to improve their performance. This review focus on the nanomedicine applications of nanomaterials containing interlocked structures. The introduction gives an overview on the significance of interdisciplinary science in the progress of the nanomedicine field, and it explains the evolution of interlocked molecules until their application in nanomedicine. The following sections are organized by the type of interlocked structure, and it comprises details of the in vitro and/or in vivo experiments involving each material: rotaxanes as imaging agents, rotaxanes as cytotoxic agents, rotaxanes as peptide transporters, mechanized silica nanoparticles as stimuli responsive drug delivery systems, and polyrotaxanes as drug and gene delivery systems.

  7. Interventions for nail psoriasis

    NARCIS (Netherlands)

    de Vries, Anna Christa Q.; Bogaards, Nathalie A.; Hooft, Lotty; Velema, Marieke; Pasch, Marcel; Lebwohl, Mark; Spuls, Phyllis I.

    2013-01-01

    Psoriasis is a common skin disease that can also involve the nails. All parts of the nail and surrounding structures can become affected. The incidence of nail involvement increases with duration of psoriasis. Although it is difficult to treat psoriatic nails, the condition may respond to therapy.

  8. Interventions for nail psoriasis

    NARCIS (Netherlands)

    Vries, A.C. de; Bogaards, N.A.; Hooft, L.; Velema, M.; Pasch, M.C.; Lebwohl, M.; Spuls, P.I.

    2013-01-01

    BACKGROUND: Psoriasis is a common skin disease that can also involve the nails. All parts of the nail and surrounding structures can become affected. The incidence of nail involvement increases with duration of psoriasis. Although it is difficult to treat psoriatic nails, the condition may respond

  9. Intertrochanteric Fracture After Hip Resurfacing Arthroplasty Managed with a Reconstruction Nail

    Directory of Open Access Journals (Sweden)

    Jason Chow

    2013-12-01

    Full Text Available Periprosthetic fractures after hip resurfacings are rare occurrences that can pose a challenge to orthopaedic surgeons. With hip resurfacings becoming more common, the prevalence of these fractures is likely to increase because these patients are usually younger and more active. We report a case of traumatic periprosthetic proximal femur fracture treated with a reconstruction intramedullary nail technique.

  10. Median nail dystrophy involving the thumb nail

    Directory of Open Access Journals (Sweden)

    Rahulkrishna Kota

    2016-01-01

    Full Text Available Median canaliform dystrophy of Heller is a rare entity characterized by a midline or a paramedian ridge or split and canal formation in nail plate of one or both the thumb nails. It is an acquired condition resulting from a temporary defect in the matrix that interferes with nail formation. Habitual picking of the nail base may be responsible for some cases. Histopathology classically shows parakeratosis, accumulation of melanin within and between the nail bed keratinocytes. Treatment of median nail dystrophy includes injectable triamcinalone acetonide, topical 0.1% tacrolimus, and tazarotene 0.05%, which is many a times challenging for a dermatologist. Psychiatric opinion should be taken when associated with the depressive, obsessive-compulsive, or impulse-control disorder. We report a case of 19-year-old male diagnosed as median nail dystrophy.

  11. Staged Custom, Intramedullary Antibiotic Spacers for Severe Segmental Bone Loss in Infected Total Hip Arthroplasty

    Directory of Open Access Journals (Sweden)

    Atul F. Kamath

    2011-01-01

    Full Text Available Introduction. Total hip arthroplasty (THA infections with severe bone loss pose significant reconstructive challenges. We present our experience with two-stage hip reimplantation using an intramedullary, antibiotic-impregnated nail. Methods. Three patients with infected THA with severe proximal femoral bone loss (Mallory type IIIB or greater were treated using a custom antibiotic spacer. Clinical outcomes and any complications were recorded. Average followup was 49 months from final reimplantation. Results. Mean age at spacer placement (stage 1 was 53 years. The mean Harris Hip Score at final followup was 80. Two patients had asymptomatic heterotopic ossification, and one patient had a 2 cm leg-length discrepancy. Conclusions. A custom intramedullary nail antibiotic spacer is a reliable option in the staged management of the infected THA with severe proximal femoral bone loss. Benefits of this technique include limb salvage with maintenance of leg length, soft tissue tension, and functional status.

  12. Intramedullary tuberculoma: A case report

    International Nuclear Information System (INIS)

    Maamar, M.; El Quessar, A.; El Fatemi, N.; El Hassani, My R.; Chakir, N.; Jiddane, M.

    2007-01-01

    Study design: We report a case of intra-medullary tuberculoma in a 22 year-old man with progressive paraparesis and sphincter dysfunction. Objectives: To present a case of intra-medullary tuberculosis and to describe the MRI's contribution to the diagnosis. Summary of background data: Intra-medullary spinal tuberculoma is a rare form of central nervous system tuberculosis. The subject and diagnosis methods: The patient, a 22 year-old man, presented with an intra-medullary tuberculoma of the dorsal spinal cord diagnosed after 6 month history of progressive paraparesis and sphincter dysfunction. MRI visualized ring enhancement of the intra-medullary dorsal lesion. Results: Total resection of the intra-medullary mass was performed through a posterior myelotomy. Histological examination revealed a granulomatous necrosis with caseum. The patient was treated with four anti-tuberculosis drugs in association with corticotherapy. The paraparesis and sphincter dysfunction improved. Conclusions: Intra-medullary spinal tuberculoma is rare, but must be considered in the differential diagnosis of spinal cord compression

  13. Open Intramedullary Nailing for Segmental Long Bone Fractures: An ...

    African Journals Online (AJOL)

    the bone only, except in cases where there was a long and narrow middle segment. In such .... method of application, and preservation of extramedullary blood supply.[10,41,42] We .... J Bone Joint Surg Br 1994;76:955‑9. 14. Sekimpi P, Okike ...

  14. Clinical Outcomes after Open Locked Intramedullary Nailing of ...

    African Journals Online (AJOL)

    2018-02-07

    Feb 7, 2018 ... above who presented within 2 weeks of sustaining closed femoral shaft fractures ... tweak, and build upon the work non-commercially, as long as the author is ... was compressed, and proximal locking screws were then.

  15. commonly asked questions on the practice of intramedullary nailing

    African Journals Online (AJOL)

    A) IMN is indicated for any shaft fractures- transverse, oblique and ... extensions. Complex fractures around the hip joint may ... ankle joints for indications such as failed arthroplasty, .... In event of delayed or nonunion which is atrophic, bone.

  16. Clinical Outcomes after Open Locked Intramedullary Nailing of ...

    African Journals Online (AJOL)

    2017-12-05

    Dec 5, 2017 ... Femoral Shaft Fractures for Adult Patients in a Nigerian Hospital .... posttreatment to assess for progression of healing. .... the most active and mobile members of the society and .... Prehospital management of lower limb.

  17. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Hair care / hair loss Injured skin Nail care Artificial nails Healthy nails Child nail care Manicure safety Nail biting Nail changes a dermatologist should examine Anti-aging skin care Kids’ zone Video library Find a ...

  18. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... hair, and nail care Skin care Hair care / hair loss Injured skin Nail care Anti-aging skin care ... hair, and nail care Skin care Hair care / hair loss Injured skin Nail care Artificial nails Healthy nails ...

  19. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... hair loss Injured skin Nail care Artificial nails Healthy nails Child nail care Manicure safety Nail biting Nail changes a dermatologist should examine Anti-aging skin care Kids’ zone Video library Find a ...

  20. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Injured skin Nail care Artificial nails Healthy nails Child nail care Manicure safety Nail biting Nail changes ... c Explore the Academy Member resources Practice Tools Education Meetings & events Advocacy Public & patients Academy resources for: ...

  1. Gamma nail in the treatment of closed trochanteric fractures. Results and indications of 121 cases.

    Science.gov (United States)

    Kempf, I; Grosse, A; Taglang, G; Favreul, E

    2014-02-01

    The Gamma Nail is the latest advance in the treatment of trochanteric fractures based on intramedullary nailing principles during closed procedures. Its design is based on Küntscher's Y-nail and locking intramedullary (IM) nails. This paper reports the results from the first-ever series of 121 patients operated between 1988 and 1990. They were followed until bone union was achieved. The mean patient age was 75 years. Most patients were in poor general health and had unstable fractures. Anatomical preoperative reduction was achieved in 72% of cases. Fixation was good in 66% of cases and acceptable in 27% of cases. Intra-operative complications consisted of nine fractures without consequences. Of the treated patients, 83.4% resumed weight-bearing during the first week. There was one case of deep infection that resolved with treatment. The mortality rate was 12.3% at three months. We noted 7 alunions in varus, 3 in valgus, 2 in external rotation and 1 in internal rotation. There were no cases of non-union. In six cases, the screw had cut out of the femoral head. The drawbacks associated with surgical treatment methods for trochanteric fractures also apply to the Gamma nail. Nevertheless, one of its primary advantages is the possibility of using a closed procedure. When compared to Ender nailing, knee pain is absent and weight-bearing can be achieved in all patients, no matter the fracture type. Copyright © 2014. Published by Elsevier Masson SAS.

  2. Treatment of distal tibial fractures: plate versus nail: a retrospective outcome analysis of matched pairs of patients.

    NARCIS (Netherlands)

    Janssen, K.W.; Biert, J.; Kampen, A. van

    2007-01-01

    A study of 24 patients who sustained an extra-articular fracture of the distal third of the tibial shaft was performed to determine the effect of the type of treatment, open reduction and internal fixation (ORIF) or closed reduction and intramedullary (IM) nailing, on the occurrence of malalignment.

  3. Single stage management of Gustilo type III A/B tibia fractures: Fixed with nail & covered with fasciocutaneous flap

    Directory of Open Access Journals (Sweden)

    G.I. Nambi

    2017-04-01

    Conclusion: Multidisciplinary management of severe lower limb trauma is important and provides good outcomes. Intramedullary nailing and immediate flap fixation can achieve early bone union and good soft tissue coverage, leading to good outcomes in patient with Grade III A & B tibia fractures.

  4. Subtrochanteric hip fractures treated with cerclage cables and long cephalomedullary nails: a review of 17 consecutive cases over 2 years.

    LENUS (Irish Health Repository)

    Kennedy, Muiris T

    2011-11-01

    The conflict between the anatomist and biologist surgeons is exemplified by the debate about subtrochanteric hip fractures. Closed intramedullary nailing is biologically friendly but may result in prolonged procedures and malunion. By contrast, accurate anatomical open reduction may disturb the biological composition of the fracture environment.

  5. The Results of the Treatment of Osteogenesis Imperfecta with Corkscrew Tipped Telescopic Nail

    Directory of Open Access Journals (Sweden)

    Hüseyin Günay

    2017-03-01

    Full Text Available Aim: We aimed to evaluate the clinical and radiological results of an intramedullary fixation system used in surgeries for fractures and deformities of osteogenesis imperfecta where we applied a new design corkscrew tipped intramedullary nailing. Materials and Methods: Twenty extremities of 14 osteogenesis cases, who underwent surgery and to whom corkscrew tipped intramedullary treatment was applied, were retrospectively scanned. Ambulation, discrepancies in the lenght of extremities, deformities and joint mobility range were all noted before the operation. Postoperative union rates, complications and our experience regarding the nail were also evaluated. Results: Six tibia and 14 femurs were operated using corkscrew tipped telescopic nails. Two bones were operated due to non-union, while seven bones underwent surgery due to acute fractures and 11 bones due to deformities. All the bones were seen to have achieved the aimed union. No major complications were observed. Infection was present in two cases. Conclusion: Corkscrew tipped telescopic nail is a safe and effective method of fixation in patients with osteogenesis imperfecta.

  6. Distributed Supervisory Protection Interlock System

    International Nuclear Information System (INIS)

    Walz, H.V.; Agostini, R.C.; Barker, L.; Cherkassky, R.; Constant, T.; Matheson, R.

    1989-03-01

    The Distributed Supervisory Protection Interlock System, DSPI, is under development at the Stanford Linear Accelerator Center for requirements in the areas of personnel protection, beam containment and equipment protection interlocks. The DSPI system, distributed over the application site, consists of segments with microprocessor-based controller and I/O modules, local area networks for communication, and a global supervisor computer. Segments are implemented with commercially available controller and I/O modules arranged in local interlock clusters, and associated software. Segments provide local interlock data acquisition, processing and control. Local area networks provide the communication backbone between segments and a global supervisor processor. The supervisor processor monitors the overall system, reports detail status and provides human interfaces. Details of an R and D test system, which will implement the requirements for personnel protection of 4 typical linear accelerator sectors, will be described. 4 refs., 2 figs

  7. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... biting your nails Nail biting typically begins in childhood and can continue through adulthood, and the side ... set of nails, such as your thumb nails, first. When that’s successful, eliminate your pinky nails, pointer ...

  8. Bactericidal properties of silver films on intramedullary implants

    Science.gov (United States)

    Gallagher, C.; Walker, C.; Cortes, E.; Hettinger, Jeffrey; Krchnavek, R.; Caputo, G. A.; Ostrum, R.

    2011-03-01

    We report on investigations of silver films on titanium and stainless steel substrates as anti-bacterial coatings for intramedullary nails used in orthopedic trauma. Silver films are deposited using a magnetron sputtering technique from a single elemental target. The deposition parameter (energy, pressure, and temperature) dependence of the silver film microstructure and adhesion will be presented. Preliminary measurements of the effectiveness of the silver films as a bactericide on S. aureus bacteria demonstrate that the films are effective destroying the bacteria. The process of this investigation will be presented. Preliminary transmission electron microscopy measurements will also presented which image healthy and damaged bacteria helping to identify the fundamental mechanism leading to the effectiveness of silver as an anti-bacterial coating. We acknowledge the support of Rowan University, College of Liberal Arts and Sciences.

  9. Ingenious method of external fixator use to maintain alignment for nailing a proximal tibial shaft fracture.

    Science.gov (United States)

    Behera, Prateek; Aggarwal, Sameer; Kumar, Vishal; Kumar Meena, Umesh; Saibaba, Balaji

    2015-09-01

    Fractures of the tibia are one of the most commonly seen orthopedic injuries. Most of them result from a high velocity trauma. While intramedullary nailing of tibial diaphyseal fractures is considered as the golden standard form of treatment for such cases, many metaphyseal and metaphyseal-diaphyseal junction fractures can also be managed by nailing. Maintenance of alignment of such fractures during surgical procedure is often challenging as the pull of patellar tendon tends to extend the proximal fragment as soon as one flexes the knee for the surgical procedure. Numerous technical modifications have been described in the literature for successfully nailing such fractures including semi extended nailing, use of medial plates and external fixators among others. In this study, it was aimed to report two cases in which we used our ingenious method of applying external fixator for maintaining alignment of the fracture and aiding in the entire process of closed intramedullary nailing of metaphyseal tibial fractures by the conventional method. We were able to get good alignment during and after the closed surgery as observed on post-operative radiographs and believe that further evaluation of this technique may be of help to surgeons who want to avoid other techniques.

  10. An intelligent interlock design support system

    International Nuclear Information System (INIS)

    Hayashi, Toshifumi; Kamiyama, Masahiko

    1990-01-01

    This paper presents an intelligent interlock design support system, called Handy. BWR plant interlocks have been designed on a conventional CAD system operating on a mini-computer based time sharing system. However, its ability to support interlock designers is limited, mainly due to the system not being capable of manipulating the interlock logic. Handy improves the design efficiency with consistent manipulation of the logic and drawings, interlock simulation, versatile database management, object oriented user interface, high resolution high speed graphics, and automatic interlock outlining with a design support expert system. Handy is now being tested by designers, and is expected to greatly contribute to their efficiency. (author)

  11. Advanced nail surgery

    Directory of Open Access Journals (Sweden)

    Eckart Haneke

    2011-01-01

    Full Text Available Six techniques not yet widely known or used in the dermatologic surgery of the nails are briefly described. Small-to-medium-sized tumours of the proximal nail fold (PNF can be excised and the defect repaired with advancement or rotation flaps. A superficial biopsy technique of the matrix for the diagnosis of longitudinal brown streaks in the nail, which allows rapid histological diagnosis of the melanocyte focus to be performed, is described here. Because the excision is very shallow and leaves the morphogenetic connective tissue of the matrix intact, the defect heals without scarring. Laterally positioned nail tumours can be excised in the manner of a wide lateral longitudinal nail biopsy. The defect repair is performed with a bipedicled flap from the lateral aspect of the distal phalanx. Malignant tumours of the nail organ often require its complete ablation. These defects can be covered by a full-thickness skin graft, reversed dermal graft, or cross-finger flap. The surgical correction of a split nail is often difficult. The cicatricial tissue of the matrix and PNF have to be excised and the re-attachment of these wounds prevented. The matrix defect has to be excised and sutured or covered with a free matrix graft taken either from the neighbouring area or from the big toe nail.

  12. Nail changes after carbamazepine

    Directory of Open Access Journals (Sweden)

    Chopra Adarsh

    2000-01-01

    Full Text Available Antiepileptics are known to produce different types of side effects including nail changes. A 20-year-old epileptic man had yellowish discolouration followed by dystrophy and onycholysis of his 15 nails after taking carbamazepine for 3 months which cleared within six months after discontinuation of the drug. This type of change has not been reported earlier with carbamazepine

  13. Skin, Hair, and Nails

    Science.gov (United States)

    ... Safe Videos for Educators Search English Español Skin, Hair, and Nails KidsHealth / For Parents / Skin, Hair, and ... piel, el cabello y las uñas About Skin, Hair and Nails Skin is our largest organ. If ...

  14. Yellow nail syndrome

    Directory of Open Access Journals (Sweden)

    Dixit Ramakant

    2007-01-01

    Full Text Available A case of yellow nail syndrome is described in a forty year old male patient who presented with classical triad of this syndrome i.e. deformed yellow nails, lymph-edema and chronic recurrent pleural effusion. The practical problems in the di-agnosis are also briefly discussed with emphasis on awareness of this rare clinical entity.

  15. Breakage of a Third Generation Gamma Nail: A Case Report and Review of the Literature

    Directory of Open Access Journals (Sweden)

    Takashi Iwakura

    2013-01-01

    Full Text Available The use of intramedullary nails to treat trochanteric fractures of the femur has increased with the increasing size of the elderly population. The third generation Gamma nail is currently one of the most popular devices for the treatment of trochanteric fractures. Nail breakage is a rare complication, possibly resulting from fatigue fracture of the implant. We present the first reported case of breakage of a third generation Gamma nail that was not used to treat a pathological fracture. An 83-year-old woman with an unstable trochanteric fracture of the femur was treated using a third generation Gamma nail. She was referred to our hospital 14 months postoperatively with nail breakage at the opening for the lag screw. The breakage was secondary to nonunion, which was thought to be mainly due to insufficient reduction of the fracture. The broken nail was removed, and the patient underwent cemented bipolar hemiarthroplasty. At followup 18 months later, she was mobile with a walker and asymptomatic with no complications. This case shows that inadequate operation such as insufficient reduction of the trochanteric fracture may result in nonunion and implant breakage, even when using a high-strength, well-designed implant.

  16. A biomechanical comparison of proximal femoral nails and locking proximal anatomic femoral plates in femoral fracture fixation A study on synthetic bones

    Directory of Open Access Journals (Sweden)

    Korhan Ozkan

    2015-01-01

    Conclusion: The proximal femoral intramedullary nail provides more stability and allows for earlier weight bearing than the locking plate when used for the treatment of unstable intertrochanteric fractures of the femur. Clinicians should be cautious for early weight bearing with locking plate for unstable intertrochanteric femur fractures.

  17. Straight proximal humeral nails are surrounded by more bone stock in comparison to bent nails in an experimental cadaveric study.

    Science.gov (United States)

    Günther, Christian Max; Müller, Peter Ernst; Mutschler, Wolf; Sprecher, Christoph Martin; Milz, Stefan; Braunstein, Volker

    2014-01-01

    In the management of proximal humeral fractures intramedullary implants with bent and straight shape of the proximal part of nail are available. Based on data from previous studies on bone distribution in the humeral head, we hypothesized, that higher densities might exist in the bone stock surrounding straight nails in comparison to their angulated counterparts. With a known positive correlation between bone density and mechanical stability, this could indicate potentially higher rigidity of osteosyntheses done with straight implants. We performed high resolution peripheral quantitative computed tomographies of the potential straight and bent implant bearing regions of 27 cadaveric proximal humeri. The acquired data were analyzed for differences between straight and bent Volumes of Interest as well as intra- and interindividual bone stock distribution. For both straight and bent volumes of interest a considerably declining bone mineral density was found in craniocaudal direction. Mean densities of bent volumes were significantly lower in comparison to their corresponding straight counterparts (p straight shaped implants can be assumed. Since we found a rapid decrease of bone density in cranio-caudal direction, intramedullary implants should be anchored as proximally in the subcortical area as possible to minimize the risk of displacement or cutout. The high correlation between the Volumes of Interest of the corresponding right and left sides could aid in preoperative planning when considering an intra- or extramedullary approach.

  18. Nail Problems (Toenails)

    Science.gov (United States)

    ... may include prescribing topical or oral medication, and debridement (removal of diseased nail matter and debris) of ... treated by your podiatrist, who susceptible to all types of infection, can diagnose the ailment, and then ...

  19. Skin or nail culture

    Science.gov (United States)

    Mucosal culture; Culture - skin; Culture - mucosal; Nail culture; Culture - fingernail; Fingernail culture ... There, it is placed in a special dish (culture). It is then watched to see if bacteria, ...

  20. Dual head screw hip nailing for trochanteric fractures

    Science.gov (United States)

    Mavrogenis, Andreas F.; Igoumenou, Vasilios G.; Megaloikonomos, Panayiotis D.; Panagopoulos, George N.; Galanopoulos, Ioannis P.; Vottis, Christos Th.; Karamanis, Eirinaios; Koulouvaris, Panayiotis; Papagelopoulos, Panayiotis J.

    2017-01-01

    Introduction: There are limited information and inconclusive results for dual head screw intramedullary hip nails for trochanteric fractures. Therefore, we performed a prospective study to evaluate the healing of fractures, and survival, function, and complications of patients operated with this implant. Methods: We prospectively studied 79 patients (61 women and 18 men; mean age: 84.7 years; range: 65–96 years) with a low-energy trochanteric fracture, treated with a dual head screw intramedullary hip nail from 2013 to 2016. The mean follow-up was 2.1 years (range: 1–3 years); seven patients were lost to follow up. This left 72 patients for further analysis. We evaluated the healing of fractures, and survival, function, and complications of patients. Results: Fracture healing was evident in 70 patients (97.2%) at 2–3 months postoperatively. One patient experienced cut-out and z-effect phenomenon of the head screws. Another patient experienced a periprosthetic femoral diaphysis fracture at the distal tip of the nail. A third patient experienced an acute postoperative superficial skin infection that was treated successfully with wound dressing changes and a course of antibiotics. Sixteen patients (22.2%) deceased within 12 months postoperatively. In the remaining patients, the Harris Hip Score (HHS) at 12 months postoperatively was excellent in 16 (28.6%), good in 23 (41.1%), fair in 10 (17.8%), and poor in 7 patients (12.5%). The function declined after the patients’ fracture. Fair and poor results were related to age > 85 years, poor pre-fracture level of function, and AO/OTA-31-A3 fracture types. Conclusion: The dual head screw intramedullary hip nail is associated with high healing and low complication rates for intertrochanteric fractures. The function of the patients is good or excellent in most cases; however, it declines, especially for those patients with age > 85 years, poor pre-fracture level of function, and AO/OTA-31-A3 fracture types

  1. Dual head screw hip nailing for trochanteric fractures

    Directory of Open Access Journals (Sweden)

    Mavrogenis Andreas F.

    2017-01-01

    Full Text Available Introduction: There are limited information and inconclusive results for dual head screw intramedullary hip nails for trochanteric fractures. Therefore, we performed a prospective study to evaluate the healing of fractures, and survival, function, and complications of patients operated with this implant. Methods: We prospectively studied 79 patients (61 women and 18 men; mean age: 84.7 years; range: 65–96 years with a low-energy trochanteric fracture, treated with a dual head screw intramedullary hip nail from 2013 to 2016. The mean follow-up was 2.1 years (range: 1–3 years; seven patients were lost to follow up. This left 72 patients for further analysis. We evaluated the healing of fractures, and survival, function, and complications of patients. Results: Fracture healing was evident in 70 patients (97.2% at 2–3 months postoperatively. One patient experienced cut-out and z-effect phenomenon of the head screws. Another patient experienced a periprosthetic femoral diaphysis fracture at the distal tip of the nail. A third patient experienced an acute postoperative superficial skin infection that was treated successfully with wound dressing changes and a course of antibiotics. Sixteen patients (22.2% deceased within 12 months postoperatively. In the remaining patients, the Harris Hip Score (HHS at 12 months postoperatively was excellent in 16 (28.6%, good in 23 (41.1%, fair in 10 (17.8%, and poor in 7 patients (12.5%. The function declined after the patients’ fracture. Fair and poor results were related to age > 85 years, poor pre-fracture level of function, and AO/OTA-31-A3 fracture types. Conclusion: The dual head screw intramedullary hip nail is associated with high healing and low complication rates for intertrochanteric fractures. The function of the patients is good or excellent in most cases; however, it declines, especially for those patients with age > 85 years, poor pre-fracture level of function, and AO/OTA-31-A3

  2. Diagnostic applications of nail clippings.

    Science.gov (United States)

    Stephen, Sasha; Tosti, Antonella; Rubin, Adam I

    2015-04-01

    "Nail clipping is a simple technique for diagnosis of several nail unit dermatoses. This article summarizes the practical approach, utility, and histologic findings of a nail clipping in evaluation of onychomycosis, nail unit psoriasis, onychomatricoma, subungual hematoma, melanonychia, and nail cosmetics, and the forensic applications of this easily obtained specimen. It reviews important considerations in optimizing specimen collection, processing methods, and efficacy of special stains in several clinical contexts. Readers will develop a greater understanding and ease of application of this indispensable procedure in assessing nail unit dermatoses." Copyright © 2015 Elsevier Inc. All rights reserved.

  3. Nail involvement in psoriatic arthritis

    Directory of Open Access Journals (Sweden)

    Piotr Sobolewski

    2017-07-01

    Full Text Available Nail psoriasis is considered a significant psychological and social problem causing functional impairment in affected patients. Nail changes hamper their daily and occupational activities and contribute to a worse quality of life. Almost 50% of patients with psoriasis vulgaris and up to 80% of patients with psoriatic arthritis are afflicted with nail lesions. The important correlation between psoriatic arthritis and nail changes is well established – the presence of the latter is a strong predictor of the development of arthritis. There is a broad spectrum of nail dystrophies associated with psoriasis, ranging from the common pitting, subungual hyperkeratosis and loosening of the nail plate to less frequent discolouration and splinter haemorrhages. Some of these symptoms are also observed in other nail diseases, and further diagnostics should be performed. The assessment tools NAPSI (Nail Psoriasis Severity Index, mNAPSI (Modified Nail Psoriasis Severity Index, and PNSS (Psoriasis Nail Severity Score are most commonly used to grade the severity of nail involvement in psoriasis and enable the evaluation of therapy effectiveness. The treatment of nail psoriasis is a major clinical challenge. It should be adjusted to the extent of dermal, articular and ungual lesions. Systemic therapies of psoriasis, especially biological agents, are most likely to be effective in treating nail psoriasis. However, as their use is limited in scope and safety, topical therapy remains a mainstay, and the combination of corticosteroids and vitamin D3 analogues is considered to be most helpful.

  4. Should the tip-apex distance (TAD) rule be modified for the proximal femoral nail antirotation (PFNA)? A retrospective study.

    Science.gov (United States)

    Nikoloski, Andrej N; Osbrough, Anthony L; Yates, Piers J

    2013-10-17

    Unstable proximal femoral fractures are common and challenging for the orthopaedic surgeon. Often, these are treated with intramedullary nails. The most common mode of failure of any device to treat these fractures is cut-out. The Synthes proximal femoral nail antirotation (PFNA) is unique because it is the only proximal femoral intramedullary nail which employs a helical blade in lieu of a lag screw. The optimal tip-apex distance is 25 mm or less for a dynamic hip screw. The optimal blade tip placement is not known for the PFNA. The aim of this study is to determine if the traditional tip-apex distance rule (TAD) less than 20 mm. There was no cut-out in cases where the TAD was from 20-30 mm. There were three implant-related failures (nail fracture, missed nail and loose locking screw), four implant-related femoral fractures, two non-unions, two delayed unions and one loss of reduction. The PFNA is a suitable fixation device for the treatment of unstable proximal femoral fractures. There were still a relatively large number of cut-outs, and the tip-apex distance in the failures showed a bimodal distribution, not like previously demonstrated with dynamic hip screw. We propose that the helical blade behaves differently to a screw, and placement too close to the subchondral bone may lead to penetration through the head.

  5. The safety interlocking system at the NAC

    International Nuclear Information System (INIS)

    Visser, K.; Mostert, H.

    1984-01-01

    The central safety interlocking system (CSIS) controls the higher level of interlocking between the various cyclotron subsystems. It ensures the safe operation of the entire cyclotron facility as regards personnel safety and proper instrument operation. The system consists of a micro-processor with a ROM-based safety interlocking program, relay output modules providing ''safety OK'' instructions to all interlocked apparatus, alarm input modules connected to transducers providing binary alarm status signals and an interface to the central control computer. All solid state electronic components of the system are situated in a low level radiation area and are interfaced to cyclotron equipment by means of 24 V relays

  6. Laterally Loaded Nail-Plates

    DEFF Research Database (Denmark)

    Nielsen, Jacob; Rathkjen, Arne

    Load-displacement curves from about 200 short-term and laterally loaded nail-plate joints are analysed. The nail-plates are from Gang-Nail Systems, type GNA 20 S. The test specimens and the measuring systems are described. The tests are divided into 32 different series. The influence of the number...

  7. Intertrochanteric fractures in elderly high risk patients treated with Ender nails and compression screw

    Directory of Open Access Journals (Sweden)

    Gangadharan Sidhartha

    2010-01-01

    Full Text Available Background: Ender and Simon Weidner popularized the concept of closed condylocephlic nailing for intertrochanteric fractures in 1970. The clinical experience of authors revealed that Ender nailing alone cannot provide secure fixation in elderly patients with osteoporosis. Hence we conducted a study to evaluate the efficacy of a combined fixation procedure using Ender nails and a cannulated compression screw for intertrochanteric fractures. Materials and Methods: 76 patients with intertrochanteric fractures were treated using intramedullary Ender nails and cannulated compression screw from January 2004 to December 2007. The mean age of the patients was 80 years (range 70-105 years.Using the Evan′s system of classification 49 were stable and 27 unstable fractures. Inclusion criteria was high risk elderly patients (age > 70 years with intertrochanteric fracture. The exclusion criteria included patients with pressure sores over the trochanteric region. Many patients had pre-existing co-morbidities like diabetes mellitus, hypertension, COPD, ischemic heart disease, CVA and coronary artery bypass surgery. The two Ender nails of 4.5mm each were passed across the fracture site into the proximal neck. This was reinforced with a 6.5 mm cannulated compression screw passed from the sub trochanteric region, across the fracture into the head. Results: The mean follow-up was 14 months (range 9-19 months Average time to fracture union was 10 weeks (range 6-16 weeks. The mean knee ROM was 130o (± 5o. There was no case of nail penetration into hip joint. In five cases with advanced osteoporosis there was minimal migration of Ender nails distally. Conclusions: The Ender nailing combined with compression screw fixation in cases of intertrochanteric fractures in high risk elderly patients could achieve reliable fracture stability with minimal complications.

  8. Trauma to the nail complex

    Directory of Open Access Journals (Sweden)

    Jefferson Braga Silva

    2014-04-01

    Full Text Available OBJECTIVE: to analyze the results from surgical intervention to treat trauma of the nail complex.METHODS: we retrospectively reviewed a series of 94 consecutive patients with trauma of the nail complex who were treated between 2000 and 2009. In 42 patients, nail bed suturing was performed. In 27 patients, nail bed suturing was performed subsequent to osteosynthesis of the distal phalanx. In 15, immediate grafting was performed, and in 10, late-stage grafting of the nail bed. The growth, size and shape of the nail were evaluated in comparison with the contralateral finger. The results were obtained by summing scores and classifying them as good, fair or poor.RESULTS: the results were considered to be good particularly in the patients who underwent nail bed suturing or nail bed suturing with osteosynthesis of the distal phalanx. Patients who underwent immediate or late-stage nail grafting had poor results.CONCLUSION: trauma of the nail complex without loss of substance presented better results than did deferred treatment for reconstruction of the nail complex.

  9. Haste bloqueada "Faculdade de Medicina de Ribeirão Preto": experiência clínica no tratamento das fraturas femorais Ribeirão Preto school of medicine locking nail: clinical experience in the femoral fractures treatment

    Directory of Open Access Journals (Sweden)

    Fernando Mendes Paschoal

    2000-12-01

    were statically locked and 6 dynamic. From these 97, only 7 were dynamised during evolution. Clinical and radiographic union had occurred in 97.09 per cent of cases with average of 16.72 weeks. In 3 cases the union did not occur with interlocking nail. There were 4 cases with suspected and 3 with established infection that were healed by the time of evolution. There were 81 cases of shortening that varied from 0.5 centimeter to 4 centimeters with an average of 1.0 centimeter. The shortening of less than and equal 2 centimeters occurred in 73 cases. The alignment distortion in any plane up from 10 degrees and equal to 15 degrees was observed in 8 patients. There were 10 cases of rotational deformities, but no case above 10 degrees. The infection incidence was low; and, the union incidence was high. The fracture stabilization had immediately allowed patient's mobilization, early rehabilitation and decreasing hospital stay, except in politrauma cases. The FMRP nail had allowed treating these kind of fractures without using any image intensifier or flexible reamers. Hence this method had turned the cost of treatment down. The outcomes were matching to those reported with intramedullary interlocking nailing which needs technical equipment more sophisticated.

  10. Nail biopsy: A user's manual

    Directory of Open Access Journals (Sweden)

    Chander Grover

    2018-01-01

    Full Text Available Nail biopsy is a procedure not routinely resorted to; but when indicated, it is often the only clue left for diagnosis. At such times, it pays to be conversant with it. It is an investigation that not only provides etiologic, diagnostic, and prognostic information but also aids in understanding the pathogenesis of nail diseases. It can be of therapeutic value, especially with respect to nail tumors. This article compiles the procedural techniques for nail biopsy of various types and attempts to summarize the evidence available in the literature. The objective of nail biopsy is to clinch a precise diagnosis of nail pathology with a simple and safe surgical procedure, avoiding pain or permanent nail damage. Patient selection is of utmost importance, wherein, the patient does not have typical skin lesions, yields inadequate information on routine nail investigations, and has no peripheral vascular compromise. The patient needs to be explained about the risks associated, the expected functional handicap, the time required for regrowth, a possibility of permanent nail dystrophy, and a possibility of not achieving a diagnosis even after the biopsy. Techniques and types of various nail biopsies are being discussed in this article. The specimen could be collected as an excision biopsy, punch biopsy, shave biopsy, or longitudinal biopsy. The trick lies in choosing the appropriate area for biopsy. Various biopsy types discussed in this article include nail plate biopsy (easiest and least scarring; nail bed biopsy (elliptical excision or punch; nail matrix biopsy (elliptical excision, punch excision (≤3 mm or tangential/shave excision; and nail fold biopsy. Complications reported along with means to minimize them are also discussed.

  11. Nail Bed Injuries

    Science.gov (United States)

    ... All Topics A-Z Videos Infographics Symptom Picker Anatomy Bones Joints Muscles Nerves Vessels Tendons About Hand Surgery What is a Hand Surgeon? What is a Hand Therapist? Media Find a Hand Surgeon Home Anatomy Nail Bed Injuries Email to a friend * required ...

  12. Titanium exposure and yellow nail syndrome

    Directory of Open Access Journals (Sweden)

    Ali Ataya

    2015-01-01

    Full Text Available Yellow nail syndrome is a rare disease of unclear etiology. We describe a patient who develops yellow nail syndrome, with primary nail and sinus manifestations, shortly after amalgam dental implants. A study of the patient's nail shedding showed elevated nail titanium levels. The patient had her dental implants removed and had complete resolution of her sinus symptoms with no change in her nail findings. Since the patient's nail findings did not resolve we do not believe titanium exposure is a cause of her yellow nail syndrome but perhaps a possible relationship exists between titanium exposure and yellow nail syndrome that requires further studies.

  13. Surgical anatomy of the nail apparatus.

    NARCIS (Netherlands)

    Haneke, E.

    2006-01-01

    Nail surgery is an integral part of dermatologic surgery. An in-depth knowledge of the anatomy, biology, physiology, and gross pathology of the entire nail unit is essential. In particular, knowledge of nail histopathology is necessary to perform diagnostic nail biopsies and other nail procedures

  14. Treatment of humeral shaft fractures using antegrade nailing: functional outcome in the shoulder.

    Science.gov (United States)

    Patino, Juan Martin

    2015-08-01

    The purpose of this study was to evaluate shoulder outcomes and function after humeral shaft fractures treated with antegrade nailing. Thirty patients with acute humeral shaft fractures who underwent antegrade locked intramedullary nailing were retrospectively studied. Range of motion (ROM) of the affected shoulder was evaluated, comparing it with the nonaffected shoulder, radiologic position of the nails, complications, and need for a second surgery. The study enrolled 20 men and 10 women (average age, 41.9 years). The average follow-up was 35.8 months. The average shoulder elevation averaged 157°, internal rotation was variable (reaching the sacroiliac joint to T7), and external rotation averaged 75°. Elbow flexion-extension ROM averaged 133° (115°-145°). According to the Rodriguez-Merchan criteria, 12 patients achieved excellent results (40%), 7 good (20%), and 6 fair (23.3%); poor results were found in 5 cases (16.6%). Twelve patients achieved full mobility of the shoulder, whereas 18 had some loss of motion, with significant differences between the affected and nonaffected shoulders (P = .001). Decreased shoulder ROM is common after antegrade nailing of humeral shaft fractures. Avoidance of nail impingement can improve final outcomes. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  15. Intramedullary Venous Drainage System for Distal Fingertip Replantations.

    Science.gov (United States)

    Purisa, Husrev; Ozturk, Muhammed Besir; Kabakas, Fatih; Mersa, Berkan; Ozcelik, Ismail Bulent; Sezer, Ilker

    2017-08-01

    The number of venous anastomoses performed during fingertip replantation is one of the most important factors affecting the success of replantation. However, because vessel diameters decrease in the zone 1 level, vessel anastomoses, especially vein anastomoses, are technically difficult and, thus, cannot be performed in most cases. Alternative venous drainage methods are crucial when any reliable vein repair is not possible. In the literature, so many artery-only replantation techniques have been defined, such as arteriovenous anastomoses, forming an arteriovenous or venocutaneous fistula, manual milking and massage, puncturing, and external bleeding via a fishmouth incision and using a medical leech. It has been shown that, in distal fingertip replantations, the medullary cavity may also be a good way for venous return. In this study, we introduce an alternative intramedullary venous drainage system we developed to facilitate venous drainage in artery-only fingertip replantations. The results of 24 fingertip replantations distal to the nail fold by using this system are presented with a literature review.

  16. Coastal protection using topological interlocking blocks

    Science.gov (United States)

    Pasternak, Elena; Dyskin, Arcady; Pattiaratchi, Charitha; Pelinovsky, Efim

    2013-04-01

    The coastal protection systems mainly rely on the self-weight of armour blocks to ensure its stability. We propose a system of interlocking armour blocks, which form plate-shape assemblies. The shape and the position of the blocks are chosen in such a way as to impose kinematic constraints that prevent the blocks from being removed from the assembly. The topological interlocking shapes include simple convex blocks such as platonic solids, the most practical being tetrahedra, cubes and octahedra. Another class of topological interlocking blocks is so-called osteomorphic blocks, which form plate-like assemblies tolerant to random block removal (almost 25% of blocks need to be removed for the assembly to loose integrity). Both classes require peripheral constraint, which can be provided either by the weight of the blocks or post-tensioned internal cables. The interlocking assemblies provide increased stability because lifting one block involves lifting (and bending) the whole assembly. We model the effect of interlocking by introducing an equivalent additional self-weight of the armour blocks. This additional self-weight is proportional to the critical pressure needed to cause bending of the interlocking assembly when it loses stability. Using beam approximation we find an equivalent stability coefficient for interlocking. It is found to be greater than the stability coefficient of a structure with similar blocks without interlocking. In the case when the peripheral constraint is provided by the weight of the blocks and for the slope angle of 45o, the effective stability coefficient for a structure of 100 blocks is 33% higher than the one for a similar structure without interlocking. Further increase in the stability coefficient can be reached by a specially constructed peripheral constraint system, for instance by using post-tension cables.

  17. The use of blocking screws with internal lengthening nail and reverse rule of thumb for blocking screws in limb lengthening and deformity correction surgery.

    Science.gov (United States)

    Muthusamy, Saravanaraja; Rozbruch, S Robert; Fragomen, Austin T

    2016-11-01

    Internal lengthening nail (ILN) is a recent development in limb lengthening and deformity correction specialty. The ILN has the distinct advantage of combining acute deformity correction with gradual lengthening of bone. While using ILN, the short metaphyseal bone fragment may develop a deformity at the time of osteotomy and nail insertion or during bone lengthening because of the wide medullary canal. These deformities are typically predictable, and blocking screws (Poller screws) are helpful in these situations. This manuscript describes the common deformities that occur in femur and tibia with osteotomies at different locations while using ILN in antegrade and retrograde nailing technique. Also, a systematic approach to the appropriate use of blocking screws in these deformities is described. In addition, the "reverse rule of thumb" is introduced as a quick reference to determine the ideal location(s) and number of blocking screws. These principles are applicable to limb lengthening and deformity correction as well as fracture fixation using intramedullary nails.

  18. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... nails, or even an entire hand. The goal is to get to the point where you no longer bite any of your nails. For some people, nail biting may be a sign of a more serious psychological ...

  19. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Part 1: Structure Part 2: Origin Part 3: Function Textbook Study notes Image library 3-D animated ... hair, and nail care Nail care Nail biting "); (function () { var a = "", b = [ "adid=aad-aad-1", "site= ...

  20. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Center Coding and reimbursement Coding MACRA Fee schedule Managing a practice Prior authorization assistance Evaluating practice models ... Child nail care Manicure safety Nail biting Nail changes a dermatologist should examine Anti-aging skin care ...

  1. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... skin, hair, and nails Skin dictionary Camp Discovery Good Skin Knowledge lesson plans and activities Video library ... biting. Replace the nail-biting habit with a good habit: When you feel like biting your nails, ...

  2. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... this safe, but awful-tasting formula discourages many people from biting their nails. Get regular manicures: Spending ... longer bite any of your nails. For some people, nail biting may be a sign of a ...

  3. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Hair care / hair loss Injured skin Nail care Anti-aging skin care Kids’ zone About skin: Your ... Nail biting Nail changes a dermatologist should examine Anti-aging skin care Kids’ zone Video library Find ...

  4. Comparative endurance testing of the Biomet Matthews Nail and the Dynamic Compression Screw, in simulated condylar and supracondylar femoral fractures

    Directory of Open Access Journals (Sweden)

    Davies Benjamin M

    2008-01-01

    Full Text Available Abstract Background The dynamic compression screw is a plate and screws implant used to treat fractures of the distal femur. The Biomet Matthews Nail is a new retrograde intramedullary nail designed as an alternative surgical option to treat these fractures. The objective of this study was to assess the comparative endurance of both devices. Method The dynamic compression screw (DCS and Biomet Matthews Nail (BMN were implanted into composite femurs, which were subsequently cyclically loaded using a materials testing machine. Simulated fractures were applied to each femur prior to the application of load. Either a Y type fracture or a transverse osteotomy was prepared on each composite femur using a jig to enable consistent positioning of cuts. Results The Biomet Matthews Nail demonstrated a greater endurance limit load over the dynamic compression screw in both fracture configurations. Conclusion The distal locking screws pass through the Biomet Matthews Nail in a unique "cruciate" orientation. This allows for greater purchase in the bone of the femoral condyle and potentially improves the stability of the fracture fixation. As these fractures are usually in weak osteoporotic bone, the Biomet Matthews Nail represents a favourable surgical option in these patients.

  5. Comparision of the Expandable Nail with Locked Nail in the ...

    African Journals Online (AJOL)

    2017-09-14

    Sep 14, 2017 ... [5-7] The axial and rotational stability of locked nails depends .... weight bearing was defined as no or minimal pain .... of the nail is changed to load bearing. In delayed .... fractures. J Bone Joint Surg Br 1988;70:206-10. 4.

  6. Unstable intertrochanteric femur fractures in geriatric patients treated with the DLT trochanteric nail.

    Science.gov (United States)

    Temiz, Aytun; Durak, Aslihan; Atici, Teoman

    2015-07-01

    To evaluate clinical-functional and radiological results of geriatric patients with unstable intertrochanteric femur fracture treated with intramedullary nail. Thirty-two patients treated with intramedullary nail (DLT trochanteric nail) due to unstable intertrochanteric femur fractures were reviewed retrospectively. Fractures 31-A2 and 31-A3 (AO classification) were evaluated. Operation time, blood loss, and blood transfusion requirements, hospitalization period, time to fracture union were evaluated and perioperative and postoperative complications were recorded. According to the modified Baumgaertner criteria fracture reduction was analyzed radiologically, and nail tip-apex distance was measured. Femoral neck-shaft angle was also evaluated. Harris Hip Score for clinical evaluation and Kyo criteria for walking capacity were used. The mean age was 72 years (65-81), mean follow up time was 18.3 months (12-26). Nineteen patients had type 31-A2 and 13 had type 31-A3 fractures. Mean operation time was 36.3min (25-45), blood loss 185.9ml (100-250). Blood transfusion was required in 7 patients. The average hospitalization duration was 6 days (4-14) while the time to surgery from admission was 2.9 days (2-6). Radiologically, in 21 of the cases fracture reduction was well (65.6%), acceptable in 9 (28.1%), and poor in 2 (6.3%). In early postoperative period, the mean collo-diaphyseal angle was 129.1° (120-140°), mean tip-apex distance was 15.5mm (10-27). The mean Harris Hip Score was 63.4 (38-90). Two patients (6.3%) had excellent, 21 patients (65.6%) had good, 7 patients (21.8%) had moderate, and 2 patients (6.3%) had poor results. Walking capacity in the last follow-up in 20 of the cases (62.5%) was pre-fracture level. While complications were observed in seventeen patients (53.1%) (5 superficial wound infections, 5 fractures of the greater trochanter, 3 cases of secondary varus angulation and 4 cases of heterotopic ossification) none of them required additional surgery

  7. Study of Ender’s Nailing in Shaft Femur Fractures of Older Children

    Directory of Open Access Journals (Sweden)

    Ladani HG

    2014-12-01

    Full Text Available Background: Fractures in shaft femur in children are relatively common. Various methods of treating these fractures starting from non operative to methods like closed intramedullary nailing are at our disposal. Traditionally non operative methods are acceptable and find wide acceptance even today in very young children. However in older children certain problems are encountered like failure to control angulation and shortening, prolonged immobilization which causes very much discomfort & the overgrowth phenomenon. In view of above difficulties, closed intramedullary nailing was attempted in older children and adolescents. I have tried to study 23 cases of shaft femur fractures in older children treated by Ender’s nails. Methodology: 22 pts., out of which one having bilateral # shaft femur (total 23 #s with age ranging from 7 to 16 yrs. were studied. 3 pts. having polio limbs studied separately. Fracture was in upper third shaft femur in 5 pts., middle third in 13 pts., lower third in 3pts. & involving more than one region in 2 pts. Fracture was transverse in 6 pts., spiral in 3 pts., oblique in 12 pts.& comminuted in 2 pts.. Results: Average union time was 10 weeks except in polio pts. where it was delayed. No nonunion, no infection. Excellent hip & knee movements in almost all pts. Out of 20 pts. ( except polio pts. limb length was equal in 17 pts., one pt. was having 1 cm. lengthening & 2 pts. were having shortening ( 1cm. & 2 cm.. Conclusion: Results of this study strongly favor the use of Ender’s nailing in shaft femur fractures in older children. Second surgery of implant removal is mandatory. Closed reduction can usually be achieved if surgery is performed earlier.

  8. MR Imaging in intramedullary cysticercosis

    Energy Technology Data Exchange (ETDEWEB)

    Parmar, H.; Patwardhan, V.; Patankar, T.; Prasad, S. [Dept. of Radiology, King Edward VII Memorial Hospital, Parel, Mumbai (India); Shah, J.; Patkar, D. [Dept. of Radiology, Dr. Balabhai Nanavati Hospital and Research Center, Mumbai (India); Castillo, M. [Dept. of Neuroradiology, Univ. of North Carolina (United States)

    2001-11-01

    Although intramedullary spinal cord cysticercosis (IMC) is uncommon, its presence is being increasingly recognised by magnetic resonance imaging. We studied six patients from an endemic region and present the MRI features and clinical correlation of IMC. Six patients who presented with para- or quadriplegia were studied by contrast enhanced spinal MRI. Prompted by the spinal lesions, all patients underwent brain MRI. Clinical data and laboratory studies were reviewed in all patients. Definite diagnosis was established in the form of response to drug therapy (n=4) and histopathology (n=2). Follow-up MRI studies of spine and brain were obtained in four patients 2 months after they started medical treatment, regardless of surgery. Five patients showed fusiform and focal enlargement of the spinal cord (cervical 2, thoracic 3). Well-defined cysts with a slightly hyperintense mural nodule were identified in five patients in T1-weighted images (T1WI). All cysts were hyperintense on T2WI and merged with the surrounding oedema. Oedema extended one to three vertebral levels above or below the cyst. Post-contrast T1WI showed well-defined, ring enhancing lesions with smooth walls in all patients. Symptoms in all patients correlated with the level of the lesions. Brain studies demonstrated lesions in just two patients. Histopathological confirmation was obtained in two patients. Follow-up spinal MRI was normal in two patients, following 2 months of treatment while residual and smaller lesions were seen in two patients. Two patients were asymptomatic and denied follow-up MRI. MRI of spinal cysticercosis were typical of and similar to those seen in cerebral lesions in our patients and corresponded to the level of symptoms. All cysts were surrounded by oedema. Two of four patients showed residual lesions after 2 months of therapy and 33% of patients showed concomitant intracranial lesions. (orig.)

  9. MR Imaging in intramedullary cysticercosis

    International Nuclear Information System (INIS)

    Parmar, H.; Patwardhan, V.; Patankar, T.; Prasad, S.; Shah, J.; Patkar, D.; Castillo, M.

    2001-01-01

    Although intramedullary spinal cord cysticercosis (IMC) is uncommon, its presence is being increasingly recognised by magnetic resonance imaging. We studied six patients from an endemic region and present the MRI features and clinical correlation of IMC. Six patients who presented with para- or quadriplegia were studied by contrast enhanced spinal MRI. Prompted by the spinal lesions, all patients underwent brain MRI. Clinical data and laboratory studies were reviewed in all patients. Definite diagnosis was established in the form of response to drug therapy (n=4) and histopathology (n=2). Follow-up MRI studies of spine and brain were obtained in four patients 2 months after they started medical treatment, regardless of surgery. Five patients showed fusiform and focal enlargement of the spinal cord (cervical 2, thoracic 3). Well-defined cysts with a slightly hyperintense mural nodule were identified in five patients in T1-weighted images (T1WI). All cysts were hyperintense on T2WI and merged with the surrounding oedema. Oedema extended one to three vertebral levels above or below the cyst. Post-contrast T1WI showed well-defined, ring enhancing lesions with smooth walls in all patients. Symptoms in all patients correlated with the level of the lesions. Brain studies demonstrated lesions in just two patients. Histopathological confirmation was obtained in two patients. Follow-up spinal MRI was normal in two patients, following 2 months of treatment while residual and smaller lesions were seen in two patients. Two patients were asymptomatic and denied follow-up MRI. MRI of spinal cysticercosis were typical of and similar to those seen in cerebral lesions in our patients and corresponded to the level of symptoms. All cysts were surrounded by oedema. Two of four patients showed residual lesions after 2 months of therapy and 33% of patients showed concomitant intracranial lesions. (orig.)

  10. Macro-Micro Interlocked Simulator

    International Nuclear Information System (INIS)

    Sato, Tetsuya

    2005-01-01

    Simulation Science is now standing on a turning point. After the appearance of the Earth Simulator, HEC is struggling with several severe difficulties due to the physical limit of LSI technologies and the so-called latency problem. In this paper I would like to propose one clever way to overcome these difficulties from the simulation algorithm viewpoint. Nature and artificial products are usually organized with several nearly autonomously working internal systems (organizations, or layers). The Earth Simulator has gifted us with a really useful scientific tool that can deal with the entire evolution of one internal system with a sufficient soundness. In order to make a leap jump of Simulation Science, therefore, it is desired to design an innovative simulator that enables us to deal with simultaneously and as consistently as possible a real system that evolves cooperatively with several internal autonomous systems. Three years experience of the Earth Simulator Project has stimulated to come up with one innovative simulation algorithm to get rid of the technological barrier standing in front of us, which I would like to call 'Macro-Micro Interlocked Algorithm', or 'Macro-Micro Multiplying Algorithm', and present a couple of such examples to validate the proposed algorithm. The first example is an aurora-arc formation as a result of the mutual interaction between the macroscopic magnetosphere-ionosphere system and the microscopic field-aligned electron and ion system. The second example is the local heavy rain fall resulting from the interaction between the global climate evolution and the microscopic raindrop growth process. Based on this innovative feasible algorithm, I came up with a Macro-Micro Multiplying Simulator

  11. Yellow Nail Syndrome - a Case Report

    Directory of Open Access Journals (Sweden)

    Paravina Mirjana

    2015-06-01

    Full Text Available Yellow nail syndrome is a rare disease of unknown etiology. It is clinically characterized by a triad of yellow nails, lymphedema at one or more sites, and chronic respiratory disease (bronchitis, bronchiectasis and rhinosinusitis. All nails may be affected, but some may be spared. The nail plates are yellowish green, thickened, occasionally with transverse ridging and onycholysis, with increased longitudinal and transversal over-curvature, with partial or complete separation of the nail plate from the nail bed, without lunula and cuticle and slow nail growth rate. The lymphedema is usually peripheral, affecting the lower limbs, or in the form of pleural effusion.

  12. Safety and interlock system for Tristan

    International Nuclear Information System (INIS)

    Takeda, S.; Kudo, K.; Katoh, T.; Akiyama, A.

    1987-01-01

    This report describes alarm and interlock system of TRISTAN, concentrating on personnel safety. The basis of TRISTAN machine-control system (TMS) is an N-to-N computer network and KEK NODAL which offers high software productivity. TMC achieves high flexibility of operation both for normal operation and for the fast commissioning. However, to assure the safety of personnel and the TRISTAN machine operation, the safety system has to continue functioning during TMC failure as well. A distributed safety and interlock system (DSIS) is used for diversification of risks in TRISTAN system. DSIS is functionally subdivided along local system lines and has a hierarchical structure of 12 programmable sequence controllers (PSCs). Optical fiber links connect the PSCs at subsystem level and a PSC at the supervisory level of TRISTAN central control room (TCCR). The subsystem PSCs provide the interlock functions between their local devices. The local PSCs interact with the central system through a limited number of summarized signals. The central PSC provides the interlock functions between the subsystems and interacts with an operator's panel. Personnel safety is based on a system of electrical interlock keys, emergency push-buttons around the tunnel, at the entrance gates or in the control room

  13. Evaluation of the Stryker S2 IM Nail Distal Targeting Device for reduction of radiation exposure: a case series study.

    Science.gov (United States)

    Anastopoulos, George; Ntagiopoulos, Panagiotis G; Chissas, Dionisios; Loupasis, George; Asimakopoulos, Antonios; Athanaselis, Eustratios; Megas, Panagiotis

    2008-10-01

    Distal locking is one challenging step during intramedullary nailing of femoral shaft fractures that can lead to an increase of radiation exposure. In the present study, the authors describe a technique for the distal locking of femoral nails, implementing a new targeting device in an attempt to reduce radiation exposure and operational time. Over a 2-year period, 127 consecutive cases of femoral shaft fractures were included in the study. All cases were treated with nailing of femoral shaft fractures with an unslotted reamed antegrade femoral nail and distal locking was performed with the use of a proximally mounted aiming device. Mean duration of the procedure was 63.5 18.1 min while the duration for distal locking was 6.6 +/- 2.6 min. In all successful cases, exposure from intraoperative fluoroscopy was 17.2 +/- 7.4 s for the whole operative procedure, and for distal locking was 2 shots, 1.35 s (range, 0.9-2.2 s) and 1.9 mGy (range, 1.1-2.9 mGy). Five cases (3.9%) were unsuccessful, but overall no intraoperative complications were encountered from the application of this technique. The ability of the device to correspond to the level of nail deformation and to properly identify the distal holes, reduced exposure to radiation compared to other published reports, and should be considered as a valuable tool for distal locking of femoral fractures.

  14. Interlocks for the LEP Radio-Frequency System

    CERN Document Server

    Livesley, S

    2000-01-01

    Interlocks for the LEP RF system totalled more than 7000. They provided protection for the personnel and a wide range of equipment: copper cavities, superconducting cavities, klystrons and high voltage equipment. The interlock system layout, functionality and components are described.

  15. Yellow nail syndrome, pincer nails, colon cancer and polyps in a 76 year-old-woman

    Directory of Open Access Journals (Sweden)

    Vitorino Modesto dos Santos

    2015-11-01

    Full Text Available The yellow nail syndrome is a scarcely described condition characterized by dystrophic yellowish nails, respiratory disturbances and lymphedema; while the pincer nail deformity is characterized by thickening and excessive transverse curvature of the nail plate. The objective of this case study is to report a 76-year-old Japanese descent woman with yellow nail syndrome and pincer nails, intestinal polyps, and sigmoid colon adenocarcinoma. Both the yellow nail syndrome and pincer nails may develop in association with malignancies, either by chance or by some etiopathogenic mechanism not well-known.

  16. Comparison of the reconstruction trochanteric antigrade nail (TAN) with the proximal femoral nail antirotation (PFNA) in the management of reverse oblique intertrochanteric hip fractures.

    Science.gov (United States)

    Makki, Daoud; Matar, Hosam E; Jacob, Nebu; Lipscombe, Stephen; Gudena, Ravindra

    2015-12-01

    Reverse oblique intertrochanteric fractures have unique mechanical characteristics and are often treated with intramedullary implants. We compared the outcomes of the reconstruction trochanteric antegrade nail (TAN) with the proximal femoral nail antirotation (PFNA). Between July 2008 and February 2014, we reviewed all patients with reverse oblique intertrochanteric fractures treated at our hospital. Patients with pathological fractures and those who were treated with other than TAN and PFNA nailing systems were excluded. Preoperative assessment included the Abbreviated mental test score (AMT), the ASA grade, pre-injury mobility and place of residence. Postoperative outcome measures included the type of implant used, time to fracture union, failures of fixation and revision surgeries. Fifty-eight patients were included and divided into two groups based on the treatment: 22 patients treated with TAN and 36 patients treated with PFNA systems. The two groups were well matched with regards to demographics and fracture type. The overall union rate was similar in both groups but the time to union was shorter in the TAN group. There were 8 implant failures in the PFNA (22.2%) group compare to none in the TAN group. Implant failure was associated with the severity of fracture (AO 31.A3.3) but was not related to fracture malreduction or screw position (Tip-apex-distance). Our study suggests that the use of reconstruction system with two screws such as TAN may be more suitable implant for reverse oblique intertrochanteric hip fractures. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. A Domain-Specific Language for Railway Interlocking Systems

    DEFF Research Database (Denmark)

    Vu, Linh Hong; Haxthausen, Anne Elisabeth; Peleska, Jan

    2014-01-01

    ). Furthermore, the paper describes an interlocking table generator (ITG) that generates automatically a well-formed interlocking table from a well-formed railway network layout. Experiments with the DSL and ITG using the RAISE tools and the C++ implementation show that the use of the DSL and ITG can increase...... the productivity and significantly reduce errors in the specifications of railway interlocking systems....

  18. Automated generation of formal safety conditions from railway interlocking tables

    DEFF Research Database (Denmark)

    Haxthausen, Anne Elisabeth

    2014-01-01

    This paper describes a tool for extracting formal safety conditions from interlocking tables for railway interlocking systems. The tool has been applied to generate safety conditions for the interlocking system at Stenstrup station in Denmark, and the SAL model checker tool has been used to check...

  19. SaRDIn - A Safe Reconfigurable Distributed Interlocking

    DEFF Research Database (Denmark)

    Fantechi, Alessandro; Gnesi, S.; Haxthausen, Anne Elisabeth

    2016-01-01

    Current computer-based interlocking systems most often have a centralized design, with all logic residing in a single computer. Centralized interlockings are complex to design. Following the general trend in Cyber-Physical Systems, the SaRDIn (Safe Reconfigurable Distributed Interlockings) concept...

  20. 21 CFR 876.4590 - Interlocking urethral sound.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Interlocking urethral sound. 876.4590 Section 876...) MEDICAL DEVICES GASTROENTEROLOGY-UROLOGY DEVICES Surgical Devices § 876.4590 Interlocking urethral sound. (a) Identification. An interlocking urethral sound is a device that consists of two metal sounds...

  1. Treatment of pediatric femoral shaft fractures by stainless steel and titanium elastic nail system: A randomized comparative trial.

    Science.gov (United States)

    Gyaneshwar, Tank; Nitesh, Rustagi; Sagar, Tomar; Pranav, Kothiyal; Rustagi, Nitesh

    2016-08-01

    in titanium group but five in stainless steel group. Majority of paediatric femoral shaft fractures are now treated operatively by elastic stable intramedullary nails. Operative intervention results in a shorter hospital stay and has economic and social benefits over conservative treatment. The cost of stainless steel nail is one third the cost of titanium nail. However, the clinico-radiological results are not significantly different between titanium and stainless steel nails at one year follow-up as observed by our study.

  2. Development of rubberized geopolymer interlocking bricks

    Directory of Open Access Journals (Sweden)

    Bashar S Mohammed

    2018-06-01

    Full Text Available Waste tires contribute badly to the environment on a huge scale as they are bulky, non-biodegradable, and prone to fire and being a shelter for mosquitos and other insects. This paper reports on a novel approach towards the development of rubberized brick by utilizing crumb rubber as the sole fine aggregate in the production of geopolymer interlocking bricks. The response surface methodology (RSM from Design Experts software has been used to determine the numbers of trial mixes and their corresponding ingredients. A total of thirteen trial mixes were carried out and tested for compressive strength and the RSM model was developed to predict the design mix based on the targeted compressive strength. The mix design was obtained to be an 18 M for NaOH and 0.8 solution to fly ash ratio. The geopolymer interlocking rubberized bricks were then produced and tested for compressive strength, dimension, modulus of rupture, water absorption, initial rate of absorption, and efflorescence. The geopolymer interlocking rubberised bricks presented a low compressive and flexural strength and a high-water absorption capacity. The bricks were rated as non-effloresced and classified as 3rd class bricks which can be used as non-load bearing material. It is recommended to utilize nano silica in order to increase the strength of the brick. Keywords: Rubberized bricks, Crumb rubber, Interlocking bricks, Geopolymer, Response surface methodology

  3. Radiation safety interlocks at the NSLS

    International Nuclear Information System (INIS)

    Dickinson, T.

    1985-07-01

    The function of the NSLS interlock systems is to insure that no one is in an area where there is hazardous radiation, and to turn off the radiation source if a person somehow gains access to such an area. The interlock systems for the high hazard areas meet the following design requirements: (1) The system is redundant, that is no single failure can render the system unsafe. This is done by providing 2 independent systems or circuits; (2) In so far as possible, the two circuits are physically different. This minimizes the possibility of related coincident failures; (3) The design is fail safe. This means that the most likely failure modes leave the system in a safe condition. For example, the following failures are safe: Loss of power in any part of the system, any combination of shorts to ground, and any combination of open circuits; and (4) The interlock system must be testable. Redundancy sometimes makes testing difficult, but testing schemes must be worked out, since an untested interlock is undependable

  4. Modelling and Verification of Relay Interlocking Systems

    DEFF Research Database (Denmark)

    Haxthausen, Anne Elisabeth; Bliguet, Marie Le; Kjær, Andreas

    2010-01-01

    This paper describes how relay interlocking systems as used by the Danish railways can be formally modelled and verified. Such systems are documented by circuit diagrams describing their static layout. It is explained how to derive a state transition system model for the dynamic behaviour...

  5. Lattice modeling of aggregate interlocking in concrete

    DEFF Research Database (Denmark)

    Eliáš, Jan; Stang, Henrik

    2012-01-01

    roughness, i.e.what is termed aggregate interlocking. We demonstrate this enhancement via the simulation of mixed-mode experiments on concrete performed at a laboratory at the Technical University of Denmark. Double notched concrete specimens were initially pre-cracked in tension. Then, various combinations...

  6. Hydrocephalus: a rare initial manifestation of sporadic intramedullary hemangioblastoma : Intramedullary hemangioblastoma presenting as hydrocephalus.

    Science.gov (United States)

    Morais, Barbara Albuquerque; Cardeal, Daniel Dante; Ribeiro E Ribeiro, Renan; Frassetto, Fernando Pereira; Andrade, Fernanda Goncalves; Matushita, Hamilton; Teixeira, Manoel Jacobsen

    2017-08-01

    Intramedullary hemangioblastomas are rare benign vascular tumors, infrequent in pediatric patients. Clinical symptoms vary according to the age of presentation, tumor size, location, and concomitant syringomyelia. This is the second reported case of hemangioblastoma presenting with acute hydrocephalus. A 3-month-old infant with acute hydrocephalus was asymptomatic after a ventriculoperitoneal shunt was placed. She returned 3 months later with irritability, acute paraplegia, and respiratory distress. Magnetic resonance imaging (MRI) showed an intramedullary T8-T9 tumor with syringomyelia. She underwent surgical resection with good results during the 6-month follow-up. Intramedullary tumors may present as hydrocephalus and other nonspecific symptoms, with invariably delayed diagnosis in children, but must be considered in suspicious cases.

  7. Spinal intramedullary ependymoma: surgical approaches and outcome.

    Science.gov (United States)

    Borges, Lawrence F

    2018-02-01

    Intramedullary ependymomas are uncommon tumors that can occur within the medullary substance of the spinal cord. Despite this difficult location, they are typically benign tumors that can most often be removed completely with an acceptable surgical risk. Therefore, the recommended management approach is usually surgical excision. This review will consider the historical context in which surgeons began treating these tumors and then review the more recent literature that guides their current management.

  8. Treatments of intramedullary spinal cord tumors

    Energy Technology Data Exchange (ETDEWEB)

    Ueyama, Kazumasa; Okada, Akihiro; Echigoya, Naoki; Yokoyama, Toru; Harata, Seiko [Hirosaki Univ., Aomori (Japan). School of Medicine

    2001-04-01

    In order to establish a treatment for intramedullary spinal cord tumors, histology, symptoms (preoperative, upon discharge from the hospital, and at the final follow-up examination), postoperative combination therapy, postoperative complications, and recurrence were assessed in patients with intramedullary spinal cord tumors treated in the author's hospital during the past 19 years. There were 26 subjects (astrocytoma in 8, ependymoma in 6, intramedullary neurinoma in 3, lipoma in 3, hemangioblastoma in 3, cavernous angioma in 1, capillary hemangioma in 1, and enterogenous cyst in 1). Surgery had been performed in 24 of them, and 7 of the tumors were completely resected, 6 were incompletely resected, and 3 were partially resected. Radiotherapy had been performed to treat 7 astrocytomas and 2 ependymomas. Kyphosis was noted as a postoperative complication in 1 patient with an astrocytoma who had received postoperative radiotherapy. Postoperative improvement was better in the patients who had the ependymomas, lipoma, and angioma, and in 1 patient with an astrocytoma. The astrocytomas were very difficult to completely remove surgically, and postoperative radiotherapy was thought to be indispensable. The ependymomas, hemangioblastomas, and angiomas could be surgically resected, but the surgeon must has to exercise sufficient care during the operation. The lipomas were also difficult to resect surgically and intratumoral decompression or decompression should be performed. For adolescents spinal deformity should be considered as one of the postoperative complications. (K.H.)

  9. Treatments of intramedullary spinal cord tumors

    Energy Technology Data Exchange (ETDEWEB)

    Ueyama, Kazumasa; Okada, Akihiro; Echigoya, Naoki; Yokoyama, Toru; Harata, Seiko [Hirosaki Univ., Aomori (Japan). School of Medicine

    2001-04-01

    In order to establish a treatment for intramedullary spinal cord tumors, histology, symptoms (preoperative, upon discharge from the hospital, and at the final follow-up examination), postoperative combination therapy, postoperative complications, and recurrence were assessed in patients with intramedullary spinal cord tumors treated in the author's hospital during the past 19 years. There were 26 subjects (astrocytoma in 8, ependymoma in 6, intramedullary neurinoma in 3, lipoma in 3, hemangioblastoma in 3, cavernous angioma in 1, capillary hemangioma in 1, and enterogenous cyst in 1). Surgery had been performed in 24 of them, and 7 of the tumors were completely resected, 6 were incompletely resected, and 3 were partially resected. Radiotherapy had been performed to treat 7 astrocytomas and 2 ependymomas. Kyphosis was noted as a postoperative complication in 1 patient with an astrocytoma who had received postoperative radiotherapy. Postoperative improvement was better in the patients who had the ependymomas, lipoma, and angioma, and in 1 patient with an astrocytoma. The astrocytomas were very difficult to completely remove surgically, and postoperative radiotherapy was thought to be indispensable. The ependymomas, hemangioblastomas, and angiomas could be surgically resected, but the surgeon must has to exercise sufficient care during the operation. The lipomas were also difficult to resect surgically and intratumoral decompression or decompression should be performed. For adolescents spinal deformity should be considered as one of the postoperative complications. (K.H.)

  10. The healing stages of an intramedullary implanted tibia: A stress strain comparative analysis of the calcification process

    Science.gov (United States)

    Filardi, Vincenzo

    2015-01-01

    Aims The extended usage of unreamed tibial nailing resulted in reports of an increased rate of complications, especially for the distal portion of the tibia. Unreamed nailing favours biology at the expense of the achievable mechanical stability, it is therefore of interest to define the limits of the clinical indications for this method. Extra-articular fractures of the distal tibial metaphysis, meta-diaphyseal junction, and adjacent diaphysis are distinct in their management from impaction derived ‘‘pilon’’ type fractures and mid-diaphyseal fractures. The goals of this work were to gain a thorough understanding of the load-sharing mechanism between unreamed nail and bones in a fractured tibia. With this purpose a complete model of the human leg was realised, simulating a mid-diaphyseal fracture, classified as A2 type 1, according to the AO classification. The analysis of the entire chain allows to have a complete picture of the stress distribution and of the most stressed bones and soft tissues, but, more importantly can overcome problems connected with boundary conditions imposed at single bony components. Methods Model consists of six bony structures: pelvis, femur, patella, fibula, tibia, and a simplified lump of the feet, configured in a standing up position. Their articular cartilage layers, were simulated by 3D membranes of opportune stiffness connecting the different segments. Moreover an unreamed intra-medullary nail Expert Tibial Nail (DePuy Synthes®) stabilized the fractured tibia. A load of 700 N has been applied at the top of pelvis and a part the feet, at the tip, was rigidly fixed. Five different contact interfaces have been imposed at the different bony surfaces in contact. Results Three different conditions were analysed: the initially healthy tibia, the A2 type 1 fractured tibia with the Expert tibial nail implanted, and the follow up stage after complete healing of tibia. Non-linear finite element analysis of the models were performed

  11. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... your fingers and from your nails to your face and mouth. To help you stop biting your ... re inclined to bite may help solve the problem. Try to gradually stop biting your nails: Some ...

  12. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... figure out how to avoid these situations and develop a plan to stop. Just knowing when you’ ... a doctor. If you bite your nails and develop a skin or nail infection, consult a board- ...

  13. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... your nails to your face and mouth. To help you stop biting your nails, dermatologists recommend the ... stress ball or silly putty instead. This will help keep your hands busy and away from your ...

  14. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... and nails Skin dictionary Camp Discovery Good Skin Knowledge lesson plans and activities Video library Find a ... counter, this safe, but awful-tasting formula discourages many people from biting their nails. Get regular manicures: ...

  15. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Resident International Grant Resident Scholarship to Legislative Conference Skin Care for Developing Countries Grant State Advocacy Grant Strauss ... A-Z index Skin, hair, and nail care Skin care Hair care / hair loss Injured skin Nail care ...

  16. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... your head About nails: More important than you think Questions lots of kids ask about their skin, ... habit with a good habit: When you feel like biting your nails, try playing with a stress ...

  17. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... care / hair loss Injured skin Nail care Anti-aging skin care Kids’ zone About skin: Your body's ... biting Nail changes a dermatologist should examine Anti-aging skin care Kids’ zone Video library Find a ...

  18. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... biting can make the skin around your nails feel sore, and it can damage the tissue that ... biting habit with a good habit: When you feel like biting your nails, try playing with a ...

  19. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... and Lectureship Clarence S. Livingood Award and Lectureship Marion B. Sulzberger Award and Lectureship Master Dermatologist Award Members ... care Nail care Nail biting "); (function () { var a = "", b = [ "adid=aad-aad-1", "site=ehs.con.aad. ...

  20. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Injured skin Nail care Anti-aging skin care Kids’ zone About skin: Your body's largest organ About ... More important than you think Questions lots of kids ask about their skin, hair, and nails. Amazing ...

  1. Is intramedullary nailing superior to plating in patients with extraarticular fracture of the distal tibia?

    OpenAIRE

    Jorge Cabrolier; Marcelo Molina

    2015-01-01

    Las fracturas metafisarias de tibia distal se producen generalmente por traumatismos de alta energía, como accidentes automovilísticos, y pueden causar discapacidad severa por dolor y deformidad. En el manejo de estas fracturas existen múltiples alternativas quirúrgicas, sin embargo es incierto cuál es la mejor opción. Utilizando la base de datos Epistemonikos, la cual es mantenida mediante búsquedas en 30 bases de datos, identificamos seis revisiones sistemáticas que en conjunto incluyen tre...

  2. Surgical approach for elastic stable intramedullary nail in pediatric radius shaft fracture

    DEFF Research Database (Denmark)

    Nørgaard, Sandra L.; Schødt Riber, Sara; Danielsson, Frederik B.

    2018-01-01

    . An electronic search of databases was performed. Titles of articles were screened, and abstracts and full text were read. Data were extracted in terms of demographics and complications. The dorsal approach had a 2.6% rate of extensor pollicis longus tendon rupture, whereas the lateral approach had a 2.9% rate...

  3. Circumferential wires as a supplement to intramedullary nailing in unstable trochanteric hip fractures

    DEFF Research Database (Denmark)

    Ban, Ilija; Birkelund, Lasse; Palm, Henrik

    2012-01-01

    Fixation of unstable trochanteric fractures is challenging. Application of a circumferential wire may facilitate bone contact and avoid postoperative fracture displacement. However, the use of circumferential wires remains controversial due to possible disturbance of the blood supply to the under......Fixation of unstable trochanteric fractures is challenging. Application of a circumferential wire may facilitate bone contact and avoid postoperative fracture displacement. However, the use of circumferential wires remains controversial due to possible disturbance of the blood supply...... to the underlying bone. We evaluated the results of applied circumferential wires, concentrating mainly on complications and reoperations....

  4. EPR spectroscopic investigation of psoriatic finger nails.

    Science.gov (United States)

    Nakagawa, Kouichi; Minakawa, Satoko; Sawamura, Daisuke

    2013-11-01

    Nail lesions are common features of psoriasis and found in almost half of the patients. However, there is no feasible spectroscopic method evaluating changes and severity of nail psoriasis. EPR (electron paramagnetic resonance) might be feasible for evaluating nail conditions in the patients of psoriasis. Finger nails of five cases with nail psoriasis, (three females and two males) were examined. Nail samples were subjected to the EPR assay. The small piece of the finger nail (1.5 × 5 mm(2)) was incubated in ~50 μM 5-DSA (5-doxylstearic acid) aqueous solutions for about 60 min at 37°C. After rinsing and wiping off the excess 5-DSA solution, the nail samples were measured by EPR. EPR spectra were analyzed using the intensity ratio (Fast/Slow) of the two motions at the peaks of the lower magnetic field. We observed two distinguishable sites on the basis of the EPR results. In addition, the modern EPR calculation was performed to analyze the spectra obtained. The nail psoriasis-related region is 2~3 times higher than that of the control. The present EPR results show that there are two distinguishable sites in the nail. In the case of nail psoriasis, the fragile components are 2~3 times more than those of the control. Thus, the EPR method is thought to be a novel and reliable method of evaluating the nail psoriasis. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  5. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... gloves to prevent biting. Replace the nail-biting habit with a good habit: When you feel like biting your nails, try ... recommend taking a gradual approach to break the habit. Try to stop biting one set of nails, ...

  6. Nail toxicity induced by cancer chemotherapy.

    Science.gov (United States)

    Gilbar, Peter; Hain, Alice; Peereboom, Veta-Marie

    2009-09-01

    To provide a comprehensive literature review of chemotherapy-induced nail toxicity, including clinical presentation, implicated drugs and approaches for prevention and management. A search of MEDLINE and EMBASE (1966-2008) databases was conducted using the terms (and variations of the terms) antineoplastic agents, nails, nail toxicity, onycholysis, and paronychia. Bibliographies from selected articles were reviewed for appropriate references. The retrieved literature was reviewed to include all articles relevant to the clinical presentation, diagnosis, incidence, prevention, and treatment of chemotherapy-induced nail toxicity. Nail toxicity is a relatively uncommon adverse effect linked to a number of chemotherapeutic agents. Clinical presentation varies, depending on which nail structure is affected and the severity of the insult. Nail changes may involve all or some nails. Toxicity may be asymptomatic and limited to cosmetic concerns, however, more severe effects, involving pain and discomfort can occur. Taxanes and anthracyclines are the antineoplastic drug groups most commonly implicated. It is suggested that the administration schedule may influence the incidence of nail abnormalities, for example reported cases linked to the weekly administration of paclitaxel.Before instituting chemotherapy, patients should be educated regarding potential nail toxicities and strategies for prevention implemented. Management includes appropriate nail cutting, avoiding potential irritants, topical, or oral antimicrobials, and possibly cessation or dose reduction of the offending agent. Cryotherapy, through the application of frozen gloves or socks, has been beneficial in reducing docetaxel-induced nail toxicity and may be effective for other drugs.

  7. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Mohs AUC MyDermPath+ Psoriasis Patient education resources Practice Management Center Coding and reimbursement Coding MACRA Fee schedule ... Child nail care Manicure safety Nail biting Nail changes a dermatologist should examine Anti-aging skin care ...

  8. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... and nail care Nail care Nail biting "); (function () { var a = "", b = [ "adid=aad-aad-1", "site=ehs. ... t", "hpos=l", "zone=public", "mcat1=de12", ]; for (var c = 0; c "); (function () { var a = "", b = [ "adid= ...

  9. Yellow nail syndrome and bronchiectasis | Adegboye | Nigerian ...

    African Journals Online (AJOL)

    The Yellow Nail Syndrome includes slow growing, opaque yellow nails with exaggerated lateral curvature, associated with lymphoedema and chronic respiratory disorders. The nail changes may precede the lymphoedema by a number of years. Bronchiectasis may be the only chronic respiratory disorder; others include ...

  10. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Private payer Medicare physician payment MACRA implementation Alternative payment models Fee schedule State policy State policy and action ... a dermatologist Why see a board-certified dermatologist? Home Public and patients Skin, hair, and nail care Nail care Nail biting "); (function () { var a = "", b = [ " ...

  11. Sliding hip screw versus the Targon PFT nail for trochanteric hip fractures: a randomised trial of 400 patients.

    Science.gov (United States)

    Parker, M J; Cawley, S

    2017-09-01

    To compare the outcomes for trochanteric fractures treated with a sliding hip screw (SHS) or a cephalomedullary nail. A total of 400 patients with a trochanteric hip fracture were randomised to receive a SHS or a cephalomedullary nail (Targon PFT). All surviving patients were followed up to one year from injury. Functional outcome was assessed by a research nurse blinded to the implant used. Recovery of mobility, as assessed by a mobility scale, was superior for those treated with the intramedullary nail compared with the SHS at eight weeks, three and nine months (p-values between 0.01 and 0.04), the difference at six and 12 months was not statistically significant (p = 0.15 and p = 0.18 respectively). The mean difference was around 0.4 points (0.3 to 0.5) on a nine point scale. Surgical time for the nail was four minutes less than that for the SHS (p Fracture healing complications were similar for the two groups. There were no statistically significant differences between implants for any other recorded outcomes including the need for post-operative blood transfusion, wound healing complications, general medical complications, hospital stay or mortality. This study confirms the findings of a previous study that both methods of treatment produce similar results, although intramedullary fixation does result in marginally improved regain of mobility in comparison with the SHS. Cite this article: Bone Joint J 2017;99-B:1210-15. ©2017 The British Editorial Society of Bone & Joint Surgery.

  12. Comparing formal verification approaches of interlocking systems

    DEFF Research Database (Denmark)

    Haxthausen, Anne Elisabeth; Nguyen, Hoang Nga; Roggenbach, Markus

    2016-01-01

    these approaches. As a first step towards this, in this paper we suggest a way to compare different formal approaches for verifying designs of route-based interlocking systems and we demonstrate it on modelling and verification approaches developed within the research groups at DTU/Bremen and at Surrey......The verification of railway interlocking systems is a challenging task, and therefore several research groups have suggested to improve this task by using formal methods, but they use different modelling and verification approaches. To advance this research, there is a need to compare....../Swansea. The focus is on designs that are specified by so-called control tables. The paper can serve as a starting point for further comparative studies. The DTU/Bremen research has been funded by the RobustRailS project granted by Innovation Fund Denmark. The Surrey/Swansea research has been funded by the Safe...

  13. Application software for new BEPC interlock system

    International Nuclear Information System (INIS)

    Tang Shuming; Na Xiangyin; Chen Jiansong; Yu Yulan

    1997-01-01

    New BEPC (Beijing electron Positron collider) interlock system has been built in order to improve the reliability of personnel safety and interlock functions. Moreover, the system updates BEPC operation message once every 6 seconds, which are displayed on TV screens at the major entrances. Since March of 1996, new BEPC interlock system has been operating reliably. The hardware of the system is based on Programmable Logic Controllers (PLC). A multimedia IBM/PC-586 as the host computer of the PLCs, monitors the PLC system via serial port COM2. The PC communicates with the central computer VAX-4500 of BEPC control system and gets operating massage of the accelerator through serial port COM3. The application software on the host computer has been developed. Visual C++ for MS-Windows 3.2 TM is selected as the work bench. It provides nice tools for building programs, such as APP STUDIO, CLASS WIZARD, APP WIZARD and debugger tool. The author describes the design idea and the structure of the application software. Error tolerance is taken into consideration. The author also presents a small database and its data structure for the application

  14. Comparative study of the second and third generation of gamma nail for trochanteric fractures: review of 218 cases.

    Science.gov (United States)

    Mingo-Robinet, Juan; Torres-Torres, Miguel; Martínez-Cervell, Carmen; Alonso Del Olmo, Juan Antonio; Rivas Laso, Jose A; Aguado-Hernández, Hector; Burón-Alvarez, Isidro

    2015-03-01

    The aim of this study was to compare the complications of the trochanteric gamma nail (TGN) and the Gamma3 Nail (G3), focusing on cutout failure. Retrospective comparative cohort analysis. Level II Teaching Trauma Center academic trauma center. Two hundred eighteen trochanteric fractures with a mean follow-up of 15 months were included in the study. They were treated either with the TGN or the G3 between January 2005 and December 2010. Bivariate, stratified, and logistic regression analysis was conducted to determine the association between cutout and the independent variables. Proximal anterograde nailing with either the TGN or the G3. Patient age, sex, type of intramedullary device, stability fracture pattern, tip-apex distance (TAD), distraction at the fracture site, cervical angle, and cutout. The relative risk (RR) of cutout was 4.71 times higher in the group treated with G3 (P fractures compared with stable fractures was 3.07 (1.01-9.35). In unstable fractures, the RR of cutout was 8.78 times higher in patients with G3 (P 25 mm (P = 0.4). We have not found any relationship between cutout rate and TAD. Only the fracture pattern and the type of implant have shown to be associated with cutout risk. In our study, Gamma3 Nail has higher cutout rates than TGN in unstable fractures. Therapeutic level III. See Instructions for Authors for a complete description of levels of evidence.

  15. Intramedullary tuberculomas: MR findings in seven patients

    International Nuclear Information System (INIS)

    Parmar, H.; Varma, R.; Shah, J.; Patkar, D.

    2000-01-01

    To describe the MR findings in intramedullary tuberculomas and to discuss the usefulness of MR in the management of this pathology. Material and Methods: A retrospective study of 7 patients from 21 to 60 years of age with clinical and radiological evidence of intramedullary tuberculomas was undertaken. Both T1- and T2-weighted images (WI) were obtained along with postcontrast T1WI. Signal intensities (SIs) of the granulomas were compared with SIs of the normal spinal cord. Results: Six patients showed focus of tuberculosis elsewhere in the body. Six out of 7 showed fusiform swelling of the cord. Ill-defined iso-intensity (in 4 patients) to hyperintensity (in 3 patients) was seen at the site of granuloma on T1WI. On T2WI, 2 patients revealed a hypointense area (with disc enhancement). An iso-hypointense rim was seen surrounding a hyperintense centre in 5 patients (with rim enhancement). Adjacent oedema was seen in all patients. In 2 patients meningeal enhancement was also seen. In 2 patients the histopathology following surgical biopsy confirmed the diagnosis. In the remaining 5 patients, another known focus of tuberculosis elsewhere in the body and a marked response to antitubercular treatment was considered confirmatory for tuberculomas. Conclusion: Hypo- or iso-intensity on T2WI within the spinal cord with surrounding hyperintense oedema is suggestive of intramedullary tuberculomas. Central hyperintensities are also detected at times due to a variable amount of caseous necrosis with liquefaction. On T1WI, fusiform swelling of the cord is seen along with iso- to hyperintense foci, surrounded by hypointense oedema of the cord. Such findings should prompt a contrast-enhanced study, which may show single or conglomerate disc- or ring-enhancing lesions. MR thus plays an important role not only in detection and diagnosis, but also in deciding the treatment options and in the follow-up of those patients

  16. JET neutral beam duct Optical Interlock

    Energy Technology Data Exchange (ETDEWEB)

    Ash, A.D.; Jones, T.T.C.; Surrey, E.; Ćirić, D.; Hall, S.I.; Young, D.; Afzal, M.; Hackett, L.; Day, I.E.; King, R.

    2015-10-15

    Highlights: • Optical Interlocks were installed on the JET NBI system as part of the EP2 upgrade. • The system protects the JET tokamak and NBI systems from thermal load damage. • Balmer-α beam emission is used to monitor the neutral beam-line pressure. • We demonstrate an improved trip delay of 2 ms compared to 50 ms before EP2. - Abstract: The JET Neutral Beam Injection (NBI) system is the most powerful neutral beam plasma heating system currently operating. Optical Interlocks were installed on the beam lines in 2011 for the JET Enhancement Project 2 (EP2), when the heating power was increased from 23 MW to 34 MW. JET NBI has two beam lines. Each has eight positive ion injectors operating in deuterium at 80 kV–125 kV (accelerator voltage) and up to 65 A (beam current). Heating power is delivered through two ducts where the central power density can be more than 100 MW/m{sup 2}. In order to deliver this safely, the beam line pressure should be below 2 × 10{sup −5} mbar otherwise the power load on the duct from the re-ionised fraction of the beam is excessive. The new Optical Interlock monitors the duct pressure by measuring the Balmer-α beam emission (656 nm). This is proportional to the instantaneous beam flux and the duct pressure. Light is collected from a diagnostic window and focused into 1-mm diameter fibres. The Doppler shifted signal is selected using an angle-tuned interference filter. The light is measured by a photo-multiplier module with a logarithmic amplifier. The interlock activation time of 2 ms is sufficient to protect the system from a fully re-ionised beam—a significant improvement on the previous interlock. The dynamic range is sufficient to see bremsstrahlung emission from JET plasma and not saturate during plasma disruptions. For high neutron flux operations the optical fibres within the biological shield can be annealed to 350 °C. A self-test is possible by illuminating the diagnostic window with a test lamp and measuring

  17. Trochanteric entry femoral nails yield better femoral version and lower revision rates-A large cohort multivariate regression analysis.

    Science.gov (United States)

    Yoon, Richard S; Gage, Mark J; Galos, David K; Donegan, Derek J; Liporace, Frank A

    2017-06-01

    Intramedullary nailing (IMN) has become the standard of care for the treatment of most femoral shaft fractures. Different IMN options include trochanteric and piriformis entry as well as retrograde nails, which may result in varying degrees of femoral rotation. The objective of this study was to analyze postoperative femoral version between three types of nails and to delineate any significant differences in femoral version (DFV) and revision rates. Over a 10-year period, 417 patients underwent IMN of a diaphyseal femur fracture (AO/OTA 32A-C). Of these patients, 316 met inclusion criteria and obtained postoperative computed tomography (CT) scanograms to calculate femoral version and were thus included in the study. In this study, our main outcome measure was the difference in femoral version (DFV) between the uninjured limb and the injured limb. The effect of the following variables on DFV and revision rates were determined via univariate, multivariate, and ordinal regression analyses: gender, age, BMI, ethnicity, mechanism of injury, operative side, open fracture, and table type/position. Statistical significance was set at pregression analysis revealed that a lower BMI was significantly associated with a lower DFV (p=0.006). Controlling for possible covariables, multivariate analysis yielded a significantly lower DFV for trochanteric entry nails than piriformis or retrograde nails (7.9±6.10 vs. 9.5±7.4 vs. 9.4±7.8°, pregression analysis. However, this is not to state that the other nail types exhibited abnormal DFV. Translation to the clinical impact of a few degrees of DFV is also unknown. Future studies to more in-depth study the intricacies of femoral version may lead to improved technology in addition to potentially improved clinical outcomes. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Elastic nailing of tibia shaft fractures in young children up to 10 years of age.

    Science.gov (United States)

    Heo, Jeong; Oh, Chang-Wug; Park, Kyeong-Hyeon; Kim, Joon-Woo; Kim, Hee-June; Lee, Jong-Chul; Park, Il-Hyung

    2016-04-01

    Although tibia shaft fractures in children usually have satisfactory results after closed reduction and casting, there are several surgical indications, including associated fractures and soft tissue injuries such as open fractures. Titanium elastic nails (TENs) are often used for pediatric tibia fractures, and have the advantage of preserving the open physis. However, complications such as delayed union or nonunion are not uncommon in older children or open fractures. In the present study, we evaluated children up to 10 years of age with closed or open tibial shaft fractures treated with elastic nailing technique. A total of 16 tibia shaft fractures treated by elastic nailing from 2001 to 2013 were reviewed. The mean patient age at operation was 7 years (range: 5-10 years). Thirteen of 16 cases were open fractures (grade I: 4, grade II: 6, grade IIIA: 3 cases); the other cases had associated fractures that necessitated operative treatments. Closed, antegrade intramedullary nailing was used to insert two nails through the proximal tibial metaphysis. All patients were followed up for at least one year after the injury. Outcomes were evaluated using modified Flynn's criteria, including union, alignment, leg length discrepancies, and complications. All fractures achieved union a mean of 16.1 weeks after surgery (range: 11-26 weeks). No patient reported knee pain or experienced any loss of knee or ankle motion. There was a case of superficial infection in a patient with grade III open fracture. Three patients reported soft tissue discomfort due to prominent TEN tips at the proximal insertion site, which required cutting the tip before union or removing the nail after union. At the last follow-up, there were no angular or rotational deformities over 10° in either the sagittal or coronal planes. With the exception of one case with an overgrowth of 15 mm, no patient showed shortening or overgrowth exceeding 10mm. Among final outcomes, 15 were excellent and 1 was

  19. INTERFIRM COOPERATION AND INFORMATION SHARING THROUGH INTERLOCKING DIRECTORATES

    Directory of Open Access Journals (Sweden)

    Mohammed Belal UDDIN

    2012-01-01

    Full Text Available When firms engage in cooperative efforts, interfirm relations get particular interest to be studied. A direct interlock occurs when an executive or director of one firm sits on the board of another firm, and an indirect interlock occurs when two firms have directors or executives who sit on the board of a third firm. The three commonly used theoretical models such as social network theory, learning theory, and theory of strategic choice are more relevant for the formation and management of interlocking directorates. Uncertainty, resource scarcity, mutual trust, dependency, etc. influence the formation of interlocking directorates. Consequently, interlocking directorates allow sharing of information and overall cooperation between partners through learning, collaboration, networking, and effective relationship, etc. Proper management of interlocking directorates requires communication and collaboration among partners that enhance exchange of knowledge and cooperation.

  20. Beam-limiting and radiation-limiting interlocks

    International Nuclear Information System (INIS)

    Macek, R.J.

    1996-01-01

    This paper reviews several aspects of beam-limiting and radiation- limiting interlocks used for personnel protection at high-intensity accelerators. It is based heavily on the experience at the Los Alamos Neutron Science Center (LANSCE) where instrumentation-based protection is used extensively. Topics include the need for ''active'' protection systems, system requirements, design criteria, and means of achieving and assessing acceptable reliability. The experience with several specific devices (ion chamber-based beam loss interlock, beam current limiter interlock, and neutron radiation interlock) designed and/or deployed to these requirements and criteria is evaluated

  1. Formal modelling and verification of interlocking systems featuring sequential release

    DEFF Research Database (Denmark)

    Vu, Linh Hong; Haxthausen, Anne Elisabeth; Peleska, Jan

    2017-01-01

    In this article, we present a method and an associated toolchain for the formal verification of the new Danish railway interlocking systems that are compatible with the European Train Control System (ETCS) Level 2. We have made a generic and reconfigurable model of the system behaviour and generic...... safety properties. This model accommodates sequential release - a feature in the new Danish interlocking systems. To verify the safety of an interlocking system, first a domain-specific description of interlocking configuration data is constructed and validated. Then the generic model and safety...

  2. Primary Intradural Hemangiopericytoma With Intramedullary Invasion

    Directory of Open Access Journals (Sweden)

    Chiang-Wei Chou

    2009-10-01

    Full Text Available Hemangiopericytoma (HPC is a rare tumor of the central nervous system and is usually found intracranially. Intraspinal HPCs are very rare and mostly involve the extradural bony structures. Primary intradural HPC has only been reported in 10 cases, all of which occurred in the extramedullary region. Intramedullary invasion has never been reported. Here, we describe a case of primary intradural HPC of the thoracic spine that presented initially with paresthesia and paraplegia of both legs. Magnetic resonance imaging of the thoracic spine showed an intradural dumbbell-shaped tumor at the T10 level. The initial impression was neurogenic tumor, meningioma, or metastasis. During operation, the tumor was found to have obvious intramedullary invasion. Gross-total removal was done, and the patient's neurological function improved; there was no recurrence at the 3-year follow-up. There is no consensus as to what constitutes the optimal treatment of HPC, but most neurosurgeons will advocate gross-total resection. A comparative analysis between intradural and extradural HPCs showed a higher chance of gross-total resection for intradural HPCs, while the recurrence rates showed no difference. The role of adjuvant radiotherapy remains uncertain. Due to the high risk of recurrence and metastasis of HPCs, close follow-up for a long period is mandatory. [J Chin Med Assoc 2009;72(10:536–541

  3. Treatment outcomes of intertrochanteric femur fractures treated with DLT™ nail

    Directory of Open Access Journals (Sweden)

    Mehmet Arıcan

    2015-12-01

    Full Text Available Objective: Intramedullary nails frequently use in proximal femur fractures. In this study, 49 patients with intertrochanteric fractures were evaluated clinical and radiological results treated with dyna locking trochanteric (DLT™ nail retrospectively. Methods: Twenty-two (44.9% patients were male and 27 (55.1% patients were female. Mean age was 74.29±1.98 (28-99 years and Followed up for a mean of 14.35±3.43 (9-24 months. Thirty-seven (75.6% of the fractures resulted from simple falls while 6 (12.2% caused from traffic accidents and 6 (12.2% fall down from height. There were 24 (49.0% left and 25 (51.0% right lower extremities fractured. According to Orthopaedic Trauma Association classification system; 21 (42.9%, 21 (42.9% and 7 (14.2% fractures were classified as 31A1, 31A2, and 31A3 respectively. One (2.0% patient had claviculae fracture, 3 (6.1% patients had radius distal fracture and 1 (2.0% patient had total knee arthroplasty. After surgery, X-ray was used for radiological results and functional outcomes were evaluated according to the Harris hip scoring system. Results: The average waiting time for the surgery was 2.02±0.18 (1-7 days and hospitalization time was 6.23±0.29 (4-15 days. Mean fracture healing time was 11.74±1.82 (8-15 weeks. Three patients had screw cut-out in the follow-up time and performed hemiarthroplasty. The average Harris hip score was 88.02±1.21 (42-97 points and included 29 (59.2% excellent cases, 17 (34.7% good and 3 (6.1% poor. Conclusion: DLT ™ nail is a safe and successful method because of low complication rates, and capability of detection.

  4. A DUAL NETWORK MODEL OF INTERLOCKING DIRECTORATES

    Directory of Open Access Journals (Sweden)

    Humphry Hung

    2003-01-01

    Full Text Available The article proposes an integrative framework for the study of interlocking directorates by using an approach that encompasses the concepts of multiple networks and resource endowment. This serves to integrate the traditional views of interorganizational linkages and intra-class cohesion. Through appropriate strategic analysis of relevant resource endowment of internal environment and external networks of organizations and corporate elites, this article argues that the selection of directors, if used effectively, can be adopted as a strategic device to enhance the corporation's overall performance.

  5. [Role of Hackethal bundle nailing in the treatment of humerus fractures: about 80 cases].

    Science.gov (United States)

    Margad, Omar; Boukhris, Jalal; Sallahi, Hicham; Daoudi, Mohamed; Azriouil, Ouahb; Koulali, Khalid

    2016-01-01

    The main debate regarding humerus fractures focuses on their therapeutic indications because any type of orthopedic or surgical stabilization finds unconditional and sometimes vehement defenders. We conducted a retrospective study of 80 patients treated initially with Hackethal's technique of intramedullary bundle nailing in the Department of Orthopaedics and Traumatology at Avicenne Military Hospital between January 2000 and January 2012. The fractures were classified according to AO classification and Hackethal classification (modified by De La Caffinière). Functional assessment was based on the modified Stewart and Hundley classification. We got 60 very good outcomes, 6 good outcomes, 2 quite good outcomes and 2 poor outcomes. The two cases with poor outcomes had pseudarthrosis. We noted no iatrogenic radial nerve palsy, infection or pin migration. The average time for union was 9 weeks and 6 days. This is a reliable, easy to perform and low cost technique, which provides a good stabilization of the fracture site, allowing early mobilization with excellent functional outcomes.

  6. An arachnoid cyst presenting as an intramedullary tumour

    NARCIS (Netherlands)

    Willems, P. W.; van den Bergh, W. M.; Vandertop, W. P.

    2000-01-01

    A case of thoracic intradural extramedullary arachnoid cyst is presented in which an intramedullary low grade glioma was suspected preoperatively. The cyst was widely fenestrated and postoperatively, the patient experienced considerable improvement in her symptoms. As postoperative MRI studies also

  7. Nail-gun injury of the cervical spine: simple technique for removal of a barbed nail.

    Science.gov (United States)

    Nathoo, Narendra; Sarkar, Atom; Varma, Gandhi; Mendel, Ehud

    2011-07-01

    Although nail-gun injuries are a common form of penetrating low-velocity injury, impalement with barbed nails has been underreported to date. Barbed nails are designed to resist dislodgment once embedded, and any attempt at removal may splay open the barbs along the path of entry, with the potential for significant soft-tissue and neurovascular injury. A 25-year-old man sustained a nail impalement of the cervical spine from accidental discharge of a nail gun. The patient was noted to be fully conscious with no neurological deficits. Cervical Zone 2 impalement was noted, with only the head of the nail visible. Angiography revealed the nail lying just anterior to the right vertebral artery (VA), with compression of the vessel. Preoperatively, analysis of a similar nail revealed that orientation of the head determined position of the barbs. A deep neck dissection was then performed to the lateral aspect of the C-3 body, using the nail as a guide. Prior to removal, the nail was turned 180° to change the position of the barbs, to prevent injury to the VA. Nail removal was uneventful. The authors present a simple technique for treatment of a nail-gun injury with a barbed nail. Prior to removal, radiographic analysis of the impaled nail must be performed to determine the presence of barbs. If possible, the surgeon should request a similar nail for analysis prior to surgery. Last, the treating surgeon must have knowledge of the barbs' position at all times during nail removal, to prevent damage to critical structures.

  8. Applied Bounded Model Checking for Interlocking System Designs

    DEFF Research Database (Denmark)

    Haxthausen, Anne Elisabeth; Peleska, Jan; Pinger, Ralf

    2014-01-01

    In this paper the verification and validation of interlocking systems is investigated. Reviewing both geographical and route-related interlocking, the verification objectives can be structured from a perspective of computer science into (1) verification of static semantics, and (2) verification o...

  9. Applied Bounded Model Checking for Interlocking System Designs

    DEFF Research Database (Denmark)

    Haxthausen, Anne Elisabeth; Peleska, Jan; Pinger, Ralf

    2013-01-01

    In this article the verification and validation of interlocking systems is investigated. Reviewing both geographical and route-related interlocking, the verification objectives can be structured from a perspective of computer science into (1) verification of static semantics, and (2) verification...

  10. The vacuum interlock system for the PETRA III beamlines

    Energy Technology Data Exchange (ETDEWEB)

    Degenhardt, Markus; Hahn, Ulrich; Hesse, Mathias; Schulte-Schrepping, Horst [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2008-07-01

    The storage ring PETRA at DESY in Hamburg is being reconstructed into the third generation source for synchrotron radiation, PETRA III. The up to 100 m long beamlines are large UHV-systems that guide the synchrotron radiation from the storage ring to the experiments. Each beamline will be equipped with a vacuum interlock system to ensure the safe operation of the vacuum components. In particular the task of the vacuum interlock is to prevent faulty operations that can cause a ventilation of the vacuum system or a damage of vacuum components by the high power synchrotron radiation beam. The interlock system will be implemented as a PLC that is connected to a distributed input/output layer via a field bus system. As a specialty, the PLC will be realised as a soft-PLC running on a PC with a real time windows operating system. Another specialty is the visualisation and remote control of the vacuum interlock system by means of a website. At the beamline the interlock will be operated via a touch panel that displays the visualisation website. Additionally, the interlock can be remotely operated from any location by opening the visualisation website with a browser. The interlock is protected against unauthorised operation by a login page. All relevant interlock data will be fed into the existing network-based archive system.

  11. Formal Verification of the Danish Railway Interlocking Systems

    DEFF Research Database (Denmark)

    Vu, Linh Hong; Haxthausen, Anne Elisabeth; Peleska, Jan

    2014-01-01

    in the new Danish interlocking systems. Instantiating the generic model with interlocking configuration data results in a concrete model and high-level safety properties. Using bounded model checking and inductive reasoning, we are able to verify safety properties for model instances corresponding to railway...

  12. Cerebral damage caused by nail gun injury

    DEFF Research Database (Denmark)

    Andersen, Chris

    2016-01-01

    Background Accidents with nail guns are rather common, especially in the construction industry. Most injuries involve the extremities and several present with intracerebral injuries. When the patient is unconscious, it can be a big challenge to determine whether the injury is an accident, self....... The forensic examination showed lesions of intracranial surgery and minor bruises on the arms. No sign of defense injuries was found. There were no signs of malfunction of the nail gun-wielding robot. On the side of the machine, there were a handheld nail gun and the police investigated the case as a possible...... criminal act. They found bloodstains on the back of the machine. When awake, the man explained, that by accident, he had hit his head against a nail gun and as a result of this, the nail gun delivered a nail into his skull. Conclusion Sometimes, the circumstances of a case are not clear...

  13. [Onychomatricoma, a rare lesion of the nail].

    Science.gov (United States)

    Pommepuy, Isabelle; Roblet, Denis; Blaise, Sophie; Delage-Corre, Manuela; Bonnetblanc, Jean-Marie; Fayol, Jacqueline; Labrousse, François

    2004-09-01

    Onychomatricoma is a rare fibroepithelial lesion of the nail matrix with peculiar clinical and histological features. Clinically, it is characterized by a longitudinal band of yellow thickening of the nail plate with transverse overcurvature and splinter hemorrhages. Nail avulsion exposes a villous tumor of the matrix with filamentous digitations extending into multiple holes of the nail plate. Histologically, a thick keratogenous zone forms a thickened nail plate. The lesion in its proximal portion is characterized by deep epithelial invaginations and by a stroma organized in two layers. The distal zone corresponds to multiple fibroepithelial projections extending into the nail plate. The diagnosis can be difficult in the presence of misleading clinical features or when the specimen is incomplete or examined with an improper orientation. Surgical resection is the recommended treatment.

  14. Combined spinal intramedullary arteriovenous malformation and lipomyelomeningocele

    Energy Technology Data Exchange (ETDEWEB)

    Weon, Y.C.; Roh, H.G.; Byun, H.S. [Samsung Medical Center, Sungkyunkwan University School of Medicine, Department of Radiology, Seoul (Korea); Chung, J.I. [Medimoa Hospital, Department of Radiology, Seoul (Korea); Eoh, W. [Samsung Medical Center, Sungkyunkwan University School of Medicine, Seoul (Korea)

    2005-10-01

    Combined spinal arteriovenous malformation and lipomyelomeningocele are extremely rare. We present a rare combined case of a lipomyelomeningocele with an intramedullary arteriovenous malformation (AVM) occurred at the L3-L4 level in a 30-year-old man who suffered from low back pain radiating to the lower extremities, dysuria, and frequency for 5 years. The MR studies showed an intradural mass with high-signal intensity on both T1-weighted and T2-weighted images, intermingled with multiple signal-void structures. The mass extended extradurally toward a subcutaneously forming fatty mass on the patient's back. Spinal angiography showed an AVM supplied by the radiculopial branches of the lumbar arteries and drained by tortuous, dilated, perimedullary veins. Endovascular embolization and surgical resection were performed. (orig.)

  15. Recurrent intramedullary epidermoid cyst of conus medullaris.

    LENUS (Irish Health Repository)

    Fleming, Christina

    2011-01-01

    Spinal intramedullary epidermoid cyst is a rare condition. Recurrent epidermoid cyst in the spine cord is known to occur. The authors describe a case of recurrent conus medullaris epidermoid cyst in a 24-year-old female. She initially presented at 7 years of age with bladder disturbance in the form of diurnal enuresis and recurrent urinary tract infection. MRI lumbar spine revealed a 4 cm conus medullaris epidermoid cyst. Since the initial presentation, the cyst had recurred seven times in the same location and she underwent surgical intervention in the form of exploration and debulking. This benign condition, owing to its anatomical location, has posed a surgical and overall management challenge. This occurrence is better managed in a tertiary-care centre requiring multi-disciplinary treatment approach.

  16. Review of Proximal Nail Antirotation (PFNA and PFNA-2 – Our Local Experience

    Directory of Open Access Journals (Sweden)

    WL Loo

    2011-07-01

    Full Text Available The proximal femoral nail antirotation (PFNA device was recently introduced as an option for intramedullary management of pertrochanteric hip fractures. We report here local results with this relatively new implant. Sixty-two patients with pertrochanteric or subtrochanteric fractures underwent intramedullary fixation with PFNA devices in our centre during the 14 month period from September 2008 to October 2009. Data for this report were retrieved from clinical case records and operative notes. We recorded the age, gender, length of stay and operative time, preoperative ambulatory status and days required to regain mobility. Fractures were classified using the AO classification (A1, A2 and A3. Complications were also identified.There were 15 male and 47 female patients and the mean age was 74.3 years. The mean surgical duration was 76.1min and the average length of hospitalisation was 14.5 days. Five cases were noted to have femoral shaft fracture and no occurrences of screw cutout. We found that 83.9% of the patients were able to regain preoperative mobility status by 6 months following surgery. We conclude that the PFNA is an effective implant for stabilisation of proximal hip fractures and that the local complication rate is similar to reports from other centres.

  17. Intramedullary disorders diagnosed by MRI. Clinical course in 23 cases

    Energy Technology Data Exchange (ETDEWEB)

    Nagata, Kensei; Ohashi, Teruaki; Ishibashi, Kazumasa; Hirohashi, Akiyuki; Sato, Kimiaki [Kurume Univ., Fukuoka (Japan). School of Medicine

    1996-09-01

    We report the clinical course of 23 cases with intramedullary disorders diagnosed by MRI. Spinal vascular disease was the most common, and occurred in 11 cases, intramedullary tumor occurred in 6, and multiple sclerosis, myelitis, spinal edema each in 2. The characteristic MRI findings of the intramedullary disorders were spinal cord swelling on T1 weighted image and changes in the intensity on the T2 weighted image. Surgical treatment was performed in 5 of the 11 with spinal vascular disease and in 6 with an intra-medullary tumor. One patient with AV malformation underwent embolization of the spinal artery. The other 11 received conservative treatment. The period of follow-up ranged from 6 months to 9 years after onset. Complete recovery from symptoms was achieved in only 2 patients, some recovery was achieved in 8, no change in 10, and deterioration occurred in 3. In conclusion, it has become easy to diagnose intramedullary disorders by utilizing MRI. However, an accurate qualitative diagnosis is difficult except for spinal vascular disease. Complete recovery from the symptoms of intramedullary disorders remains difficult to achieve by available treatments. (author)

  18. Intramedullary disorders diagnosed by MRI. Clinical course in 23 cases

    International Nuclear Information System (INIS)

    Nagata, Kensei; Ohashi, Teruaki; Ishibashi, Kazumasa; Hirohashi, Akiyuki; Sato, Kimiaki

    1996-01-01

    We report the clinical course of 23 cases with intramedullary disorders diagnosed by MRI. Spinal vascular disease was the most common, and occurred in 11 cases, intramedullary tumor occurred in 6, and multiple sclerosis, myelitis, spinal edema each in 2. The characteristic MRI findings of the intramedullary disorders were spinal cord swelling on T1 weighted image and changes in the intensity on the T2 weighted image. Surgical treatment was performed in 5 of the 11 with spinal vascular disease and in 6 with an intra-medullary tumor. One patient with AV malformation underwent embolization of the spinal artery. The other 11 received conservative treatment. The period of follow-up ranged from 6 months to 9 years after onset. Complete recovery from symptoms was achieved in only 2 patients, some recovery was achieved in 8, no change in 10, and deterioration occurred in 3. In conclusion, it has become easy to diagnose intramedullary disorders by utilizing MRI. However, an accurate qualitative diagnosis is difficult except for spinal vascular disease. Complete recovery from the symptoms of intramedullary disorders remains difficult to achieve by available treatments. (author)

  19. Medial pelvic migration of the lag screw in a short gamma nail after hip fracture fixation: a case report and review of the literature

    Directory of Open Access Journals (Sweden)

    Li Xinning

    2010-08-01

    Full Text Available Abstract Hip fractures are a common injury among the elderly. Internal fixation with an intramedullary (IM system has gained popularity for the treatment of intertrochanteric femur fractures. Multiple complications associated with IM fracture fixation have been described, however, we report a rare complication of medial pelvic migration of the lag screw of a short IM nail in a stable construct ten weeks post surgery. The patient was subsequently treated with Lag Screw removal and revision surgery with a shorter Lag Screw and an accessory cannulated screw acting as a de-rotational device. The patient did well with the revision surgery and was able to return to full activities.

  20. Contemporary management of subtrochanteric fractures.

    Science.gov (United States)

    Joglekar, Siddharth B; Lindvall, Eric M; Martirosian, Armen

    2015-01-01

    Cephalomedullary interlocking nails that allow for trochanteric entry and minimally invasive fixation have revolutionized the contemporary management of subtrochanteric fractures with improved union rates and decreased incidence of fixation failure. The most successful alternative to intramedullary fixation remains the angled blade plate. Despite biomechanical superiority of contemporary intramedullary implants to previous intramedullary devices, the importance of achieving and maintaining satisfactory fracture reduction prior to and during hardware insertion cannot be overemphasized. In comminuted and more challenging fractures, additional techniques, such as limited open reduction with clamps and/or cables, can allow for canal restoration and more anatomic reductions prior to and/or during nail insertion. Published by Elsevier Inc.

  1. Nail tic disorders: Manifestations, pathogenesis and management.

    Science.gov (United States)

    Singal, Archana; Daulatabad, Deepashree

    2017-01-01

    Nail tic disorders are classic examples of overlap between the domains of dermatology and psychiatry. They are examples of body-focused repetitive behaviors in which there is an irresistible urge or impulse to perform a certain behavior. The behavior is reinforced as it results in some degree of relief and pleasure. Nail tic disorders are common, yet poorly studied and understood. The literature on nail tic disorders is relatively scarce. Common nail tics include nail biting or onychophagia, onychotillomania and the habit tic deformity. Some uncommon and rare nail tic disorders are onychoteiromania, onychotemnomania, onychodaknomania and bidet nails. Onychophagia is chronic nail biting behavior which usually starts during childhood. It is often regarded as a tension reducing measure. Onychotillomania is recurrent picking and manicuring of the fingernails and/or toenails. In severe cases, it may lead to onychoatrophy due to irreversible scarring of the nail matrix. Very often, they occur in psychologically normal children but may sometimes be associated with anxiety. In severe cases, onychotillomania may be an expression of obsessive-compulsive disorders. Management of nail tic disorders is challenging. Frequent applications of distasteful topical preparations on the nail and periungual skin can discourage patients from biting and chewing their fingernails. Habit-tic deformity can be helped by bandaging the digit daily with permeable adhesive tape. Fluoxetine in high doses can be helpful in interrupting these compulsive disorders in adults. For a complete diagnosis and accurate management, it is imperative to assess the patient's mental health and simultaneously treat the underlying psychiatric comorbidity, if any.

  2. PcInterlock: Implementation and Operational Experience with the Optics Interlock

    CERN Document Server

    Schaumann, Michaela; Fuchsberger, Kajetan; Wenninger, Jorg

    2018-01-01

    In 2016 the luminosity reach of the LHC was increased by reducing the β-function in the main collision points below the design value to β∗ = 40 cm. This was possible due to a review of the margins in the collimation hierarchy followed by the implementation of additional measures to ensure the phase advance in defined ranges around the circumference. The risk of damaging the triplet or the tertiary collimators (TCTs) close to the interaction points in the event of an asynchronous beam dump is minimized by including margins in the collimation hierarchy, which define the β∗-reach. By guaranteeing the phase advance within an acceptable tolerance between the beam dump kicker and the TCTs, those margins can be reduced and operation at lower β∗ becomes possible. A new interlock system on the quadrupole magnet currents was put in place to safeguard the stability of the phase advance. This note describes the technical implementation of this power-converter interlock (PcInterlock) and the strategies used to...

  3. Enhancing the Use of Vehicle Alcohol Interlocks With Emerging Technology.

    Science.gov (United States)

    Voas, Robert B

    2014-01-01

    Among the earliest applications of health technologies to a safety program was the development of blood alcohol content (BAC) tests for use in impaired-driving enforcement. This led to the development of miniature, highly accurate devices that officers could carry in their pockets. A natural extension of this technology was the vehicle alcohol interlock, which is used to reduce recidivism among drivers convicted of driving under the influence (DUI) by requiring them to install the devices (which will not allow someone with a positive BAC to drive) on their vehicles. While on the vehicle, interlocks have been shown to reduce recidivism by two-thirds. Use of these devices has been growing at the rate of 10 to 15 percent a year, and there currently are more than 300,000 units in use. This expansion in the application of interlocks has benefited from the integration of other emerging technologies into interlock systems. Such technologies include data systems that record both driver actions and vehicle responses, miniature cameras and face recognition to identify the user, Wi-Fi systems to provide rapid reporting on offender performance and any attempt to circumvent the device, GPS tracking of the vehicle, and more rapid means for monitoring the integrity of the interlock system. This article describes how these health technologies are being applied in interlock programs and the outlook for new technologies and new court sanctioning programs that may influence the growth in the use of interlocks in the future.

  4. Analysis of interlocking performances on non-oriented electrical steels

    Science.gov (United States)

    Liu, Li-Hsiang; Liu, Lee-Cheng

    2018-05-01

    In order to reduce energy loss in motor, applications of high-efficiency non-oriented electrical steel sheets and optimal laminating process are both important elements. The motor core loss deterioration is influenced by a number of factors, such as flux distribution, stress and strain, space harmonics, temperature, and short circuits between lamination. In conventional clamping method, steel sheets are laminated via interlocking or welding in general manner. The measured energy loss by welding was much larger than that by interlocking. Therefore, interlocking is well known and usually employed with benefit of easy conducting. The protuberance shapes affected the fastening strength. Generally, the intensity of rectangular type is stronger than the circular counterparts. However, the circular interlocking has better magnetic characteristics. To clarify the method effectiveness, interlocking performances regarding fastened strength and magnetic deterioration by lamination were investigated. The key parameters of protuberance shape and forming depth were designed. Precisely manufacturing operation was applied to avoid interlocking failure. Magnetic properties largely influenced by clamping method are crucial to minimizing the magnetic deterioration during laminating procedure. Several experiments for various processing conditions were undertaken, and the quantification results showed the rectangular interlocking had better fastened strength but worsened iron loss comparing with the circular arrangement. To acquire the comprehensive mechanical and electrical identities for electrical steel lamination, deliberate producing conditions regarding minimizing the magnetic deterioration should be adopted prudently.

  5. Mycobacteria in nail salon whirlpool footbaths, California.

    Science.gov (United States)

    Vugia, Duc J; Jang, Yvonne; Zizek, Candi; Ely, Janet; Winthrop, Kevin L; Desmond, Edward

    2005-04-01

    In 2000, an outbreak of Mycobacterium fortuitum furunculosis affected customers using whirlpool footbaths at a nail salon. We swabbed 30 footbaths in 18 nail salons from 5 California counties and found mycobacteria in 29 (97%); M. fortuitum was the most common. Mycobacteria may pose an infectious risk for pedicure customers.

  6. Nail psoriasis: a questionnaire-based survey

    NARCIS (Netherlands)

    Klaassen, K.M.G.; Kerkhof, P.C.M. van de; Pasch, M.C.

    2013-01-01

    BACKGROUND: Skin manifestations are the most characteristic finding of psoriasis. However, nail involvement is also a clinical feature of disease although it is often overlooked. The documented prevalence of nail psoriasis varies between 10.0% and 81.1%. OBJECTIVES: The aim of this investigation is

  7. Functional Analysis and Treatment of Nail Biting

    Science.gov (United States)

    Dufrene, Brad A.; Watson, T. Steuart; Kazmerski, Jennifer S.

    2008-01-01

    This study applied functional analysis methodology to nail biting exhibited by a 24-year-old female graduate student. Results from the brief functional analysis indicated variability in nail biting across assessment conditions. Functional analysis data were then used to guide treatment development and implementation. Treatment included a…

  8. A new interlock design for the TESLA RF system

    International Nuclear Information System (INIS)

    Leich, H.; Kahl, J.; Choroba, S.; Grevsmuehl, T.; Heidbrook, N.

    2001-01-01

    The RF system for TESLA requires a comprehensive interlock system. Usually interlock systems are organized in a hierarchical way. In order to react to different fault conditions in a fast and flexible manner a nonhierarchical organization seems to be the better solution. At the TESLA Test Facility (TTF) at DESY the authors will install a nonhierarchical interlock system that is based on user designed reprogrammable gate-arrays (FPGA's) which incorporate an embedded microcontroller system. This system could be used later for the TESLA linear collider replacing a strictly hierarchical design

  9. Nail changes and disorders among the elderly

    Directory of Open Access Journals (Sweden)

    Singh Gurcharan

    2005-01-01

    Full Text Available Nail disorders are frequent among the geriatric population. This is due in part to the impaired circulation and in particular, susceptibility of the senile nail to fungal infections, faulty biomechanics, neoplasms, concurrent dermatological or systemic diseases, and related treatments. With aging, the rate of growth, color, contour, surface, thickness, chemical composition and histology of the nail unit change. Age associated disorders include brittle nails, trachyonychia, onychauxis, pachyonychia, onychogryphosis, onychophosis, onychoclavus, onychocryptosis, onycholysis, infections, infestations, splinter hemorrhages, subungual hematoma, subungual exostosis and malignancies. Awareness of the symptoms, signs and treatment options for these changes and disorders will enable us to assess and manage the conditions involving the nails of this large and growing segment of the population in a better way.

  10. Microbiological flora and nail polish: a brief report.

    Science.gov (United States)

    Rayan, G M; Flournoy, D J; Schlageter, P

    1994-11-01

    Removing nail polish and prosthetic nails from operating room (OR) personnel prior to scrubbing and from patients prior to hand surgery is recommended but not practiced in many hospitals. There is concern that nail polish can act as a vehicle for the transfer of infectious agents. This study was designed to determine the incidence of microbiological flora of nail polish in a clinical setting.

  11. Feasibility of purely endoscopic intramedullary fixation of mandibular condyle fractures.

    Science.gov (United States)

    Frake, Paul C; Goodman, Joseph F; Joshi, Arjun S

    2015-01-01

    The investigators of this study hypothesized that fractures of the mandibular condyle can be repaired using short-segment intramedullary implants and purely endoscopic surgical technique, using a basic science, human cadaver model in an academic center. Endoscopic instrumentation was used through a transoral mucosal incision to place intramedullary implants of 2 cm in length into osteotomized mandibular condyles. The surgical maneuvers that required to insert these implants, including condyle positioning, reaming, implant insertion, and seating of the mandibular ramus, are described herein. Primary outcome was considered as successful completion of the procedure. Ten cadaveric mandibular condyles were successfully repaired with rigid intramedullary internal fixation without the use of external incisions. Both insertion of a peg-type implant and screwing a threaded implant into the condylar head were possible. The inferior portion of the implant remained exposed, and the ramus of the mandible was manipulated into position on the implant using retraction at the sigmoid notch. The results of this study suggest that purely endoscopic repair of fractures of the mandibular condyle is possible by using short-segment intramedullary titanium implants and a transoral endoscopic approach without the need for facial incisions or punctures. The biomechanical advantages of these intramedullary implants, including improved strength and resistance to mechanical failure compared with miniplates, have been recently established. The combination of improved implant design and purely endoscopic technique may allow for improved fixation and reduced surgical- and implant-related morbidity in the treatment of condylar fractures.

  12. Synthesis of interlocked molecules by olefin metathesis

    Science.gov (United States)

    Clark, Paul Gregory

    A large body of work in the Grubbs group has focused on the development of functional-group tolerant ruthenium alkylidene catalysts that perform a number of olefin metathesis reactions. These catalysts have seen application in a wide range of fields, including classic total synthesis as well as polymer and materials chemistry. One particular family of compounds, interlocked molecules, has benefitted greatly from these advances in catalyst stability and activity. This thesis describes several elusive and challenging interlocked architectures whose syntheses have been realized through the utilization of different types of ruthenium-catalyzed olefin metathesis reactions. Ring-closing olefin metathesis has enabled the synthesis of a [c2]daisy-chain dimer with the ammonium binding site near the cap of the dimer. A deprotonated DCD possessing such a structural attribute will more forcefully seek to restore coordinating interactions upon reprotonation, enhancing its utility as a synthetic molecular actuator. Dimer functionalization facilitated incorporation into linear polymers, with a 48% size increase of an unbound, extended analogue of the polymer demonstrating slippage of the dimer units. Ongoing work is directed at further materials studies, in particular, exploring the synthesis of macroscopic networks containing the DCD units and analyzing the correlation between molecular-scale extension-contraction manipulations and resulting macro-scale changes. A "clipping" approach to a polycatenated cyclic polymer, a structure that resembles a molecular "charm bracelet", has been described. The use of ring-opening metathesis polymerization of a carbamate monomer in the presence of a chain transfer agent allowed for the synthesis of a linear polymer that was subsequently functionalized and cyclized to the corresponding cyclic analogue. This cyclic polymer was characterized through a variety of techniques, and subjected to further functionalization reactions, affording a cyclic

  13. The use of blocking screws with internal lengthening nail and reverse rule of thumb for blocking screws in limb lengthening and deformity correction surgery

    Directory of Open Access Journals (Sweden)

    Saravanaraja Muthusamy

    2016-09-01

    Full Text Available Abstract Internal lengthening nail (ILN is a recent development in limb lengthening and deformity correction specialty. The ILN has the distinct advantage of combining acute deformity correction with gradual lengthening of bone. While using ILN, the short metaphyseal bone fragment may develop a deformity at the time of osteotomy and nail insertion or during bone lengthening because of the wide medullary canal. These deformities are typically predictable, and blocking screws (Poller screws are helpful in these situations. This manuscript describes the common deformities that occur in femur and tibia with osteotomies at different locations while using ILN in antegrade and retrograde nailing technique. Also, a systematic approach to the appropriate use of blocking screws in these deformities is described. In addition, the “reverse rule of thumb” is introduced as a quick reference to determine the ideal location(s and number of blocking screws. These principles are applicable to limb lengthening and deformity correction as well as fracture fixation using intramedullary nails.

  14. Refining the maintenance techniques for Interlocking Concrete Paver GIs

    Science.gov (United States)

    Surface clogging adversely affects the performance of Interlocking Concrete Pavements (ICP) by reducing their ability to infiltrate stormwater runoff. The clogging rate is a function of pavement type, traffic loading, surrounding physical environment and maintenance treatments. ...

  15. Interlock system of electron beam machine GJ-2

    International Nuclear Information System (INIS)

    Marnada, Nada

    1999-01-01

    As an irradiation installation facility, the electron beam machine (EBM) irradiation facility which use radionuclide as radiation source. There are three safety aspects to be considered in the facility i.e the safeties for human, machines, and samples to be irradiated. The safety aspect for human is to the radiation hazard and the safety aspect for machine and sample is to the damage as the result of operating failure. In the EBM GJ-2 (made in China) twelve interlock system parameter are installed to keep all of the safety aspects. Each interlock system consist transducer that controls a certain switch, a magnetic relay, and visible and audible interlock indicators to improve the reliability of interlock systems a method called redundancy method is applied to the systems of operation of high voltage. (author)

  16. SUPRAPATELLAR VERSUS INFRAPATELLAR TIBIAL NAIL INSERTION- A PROSPECTIVE, RANDOMISED CONTROL PILOT STUDY

    Directory of Open Access Journals (Sweden)

    Sreekumar K

    2017-06-01

    Full Text Available BACKGROUND The standard for treating tibial shaft fractures are by intramedullary nails currently. After the procedure, one of the most frequent complication is knee pain, after consolidation even more chronically. Chronic knee pain can affect more than 50% of the cases, which was said by most authors. Alternative routes of inserting the nail is used, which includes by means of lateral patellar paratendon, medial patellar paratendon or transtendon to avoid the symptom. The aim of the study is to study the clinical and functional outcomes of suprapatellar versus infrapatellar tibial nail insertion. MATERIALS AND METHODS This is a prospective study, which was done from January 2014 to February 2015 and 50 patients who were skeletally mature were selected and randomised into IP and SP nail insertion groups. They were also given informed consent and only after they agreed, they were taken into the study. The technique of nail insertion was revealed to both the surgeon and the patient at that time. Exclusion Criteria- Pregnant women, patients with intra-articular involvement, periprosthetic fractures, nonunions, ipsilateral injuries, previous knee injuries, history of gout, rheumatoid, osteoarthritis, spinal injury and incarceration. SP insertion was performed percutaneously with the help of a special cannula system. RESULTS A total of 50 patients were selected in this study. 31 SP and 19 IP. 10 SP and 2 IP did not show up for follow up examinations, so only 38 patients were present for 12 months. At last, there were 21 SP and 17 IP patients. The time from when the index procedure was done to follow up was 14.6 months, i.e. it ranged from 12-28 months. 12 were males and 9 were females with suprapatellar, 9 were males and 8 were females in infrapatellar. Average age of suprapatellar was 42 and that of infrapatellar was 44. Open fractures were 5 and closed fractures were 33. VAS score was 0.78 in suprapatellar and 1.87 in infrapatellar. Data analysis

  17. Management of Femoral Shaft Fractures with Elastic Titanium Nails in Pediatric Patients

    Directory of Open Access Journals (Sweden)

    Yunus Güzel

    2016-06-01

    Full Text Available Objective: The aim of this study was to evaluate the func­tional and radiological results of the application of intra­medullary fixation with elastic titanium nails in unstable femoral fractures and to determine the factors affecting these results. Methods: A total of 32 patients aged 4-17 years treated with intramedullary elastic nails for a femoral diaphysis fracture between 2001 and 2014 were included. The frac­ture was left side in 12 cases, right side in 18 and bilateral in 2. The fracture pattern was determined as fragmented in 11 cases, short oblique in 11, transverse in 8 and spi­ral in 4. The same surgical technique and postoperative care was applied to all the patients. Sagittal and coronal angle measurements were made from postoperative and follow-up anterior-posterior and lateral radiographs. The mean follow-up period was 54 months (12-156 months. Positive union criteria were accepted as pain-free weight-bearing and callus bridging in at least 3 cortices seen on direct radiographs. Results: Union was achieved in all except one patient. They were able to return to previous activities with full knee and hip joint range of movement. Radiologically, the mean time to union was determined as 9 weeks (range, 6-16 weeks. Limb shortness was determined in 5 (14% patients. No significant association was detected be­tween shortness and fracture pattern. No varus or valgus angulation of >10˚ was determined in any patient. Conclusion: Application of titanium elastic nails in pe­diatric femoral diaphysis fractures is a comfortable, eco­nomic, and reliable method which is allows early weight-bearing.

  18. The effect of canal fill on paediatric femur fractures treated with titanium elastic nails.

    Science.gov (United States)

    Nielsen, E; Bonsu, N; Andras, L M; Goldstein, R Y

    2018-02-01

    Traditional teaching for fixation of paediatric femur fractures recommends 80% nail diameter/medullary canal diameter ratio (ND/MCD) for successful maintenance of reduction. Prior studies have investigated this with stainless steel Enders nails. Our aim was to assess the impact of ND/MCD on maintenance of reduction and malunion rates in paediatric femur fractures treated with flexible intramedullary nails (FINs). Retrospective data was collected on all paediatric patients treated with FINs for diaphyseal femur fractures at a single tertiary care institution over a ten-year period. Patients with co-morbidities affecting bone quality were excluded. Patients were subdivided into groups based on ND/MCD. A total of 66 patients met inclusion criteria. Mean ND/MCD was 76.3% (32.9% to 98.8%, SD 14.3). In all, 50% (n = 33/66) of patients had > 80% ND/MCD, and only 13.6% (n = 9/66) of patients had less than 60% ND/MCD. When controlling for fracture stability, ND/MCD had no correlation with mean shortening (p = 0.07) There was no correlation between ND/MCD and angulation in the sagittal (p = 0.96) or coronal plane (p = 0.20). Three patients fit malunion criteria. ND/MCD for these patients were 40%, 67% and 79%. There was no correlation between ND/MCD and shortening or malangulation. The majority of patients in this series with less than 80% fill with FIN healed within acceptable parameters. III.

  19. Intramedullary cavernous hemangiomas, magnetic resonance studies in four patients

    International Nuclear Information System (INIS)

    Barrena, M.R.; Guelbenzu, S.; Garcia, S.; Bertrol, V.

    1998-01-01

    Intramedullary cavernous hemangiomas are vascular malformations that can be located throughout the entire central nervous system. They are more frequently found in brain than in spinal cord, where it is only possible to diagnose them by magnetic resonance (RM): We present four cases of intramedullary spinal cord cavernoma, three of which were located in the thoracic spine and one in cervical spine. Computed tomography was ineffective in their diagnosis. However, MR disclosed there presence of well-defined tumors producing a thickening of the spinal cord. The signal was heterogeneous in both T1 and T2-weighted images. There were low signal areas due to the presence of calcium and hemosiderin and high intensity signals provoked by methemoglobin within the lesions, which were scarcely enhanced by intravenous gadolinium administration. One of the lesions presented in the form of a large intramedullary hematoma. (Author) 8 refs

  20. Stuffing the nail: A simple technique for the extraction of a broken femoral nail.

    Science.gov (United States)

    Lovell, Jane; Krishna, Damodaran; Gehr, Eugene

    2017-06-01

    The extraction of broken femoral nails can be a challenging procedure and surgeons should be familiar with many different techniques. This paper demonstrates a case study and new, simple and cost effective technique for the removal of broken cannulated femoral nails. Our technique uses two guide wires of variable diameter and had several key points of differentiation from previous methods. Firstly, stuffing the nail with guide wires of greater total diameter than the cannula; secondly, reversing the second guide wire and finally, bending the tips of the wires. These innovations allow the technique to be used for narrow cannulated nails, superior purchase along the length of the nail, easy wire insertion and limited soft tissue damage. Our technique for the removal of broken femoral nails is quick, effective, cheap and easy to replicate and can be used by any generalist orthopaedic surgeon with basic equipment.

  1. Interlock system for the COMPASS tokamak

    Czech Academy of Sciences Publication Activity Database

    Hron, Martin; Sova, J.; Šíba, J.; Kovář, J.; Adámek, Jiří; Pánek, Radomír; Havlíček, Josef; Písačka, Jan; Mlynář, Jan; Stöckel, Jan

    2010-01-01

    Roč. 85, 3-4 (2010), s. 505-508 ISSN 0920-3796. [IAEA Technical Meeting on Control, Data Acquisition and Remote Participation for Fusion Research/7th./. Aix – en – Provence, 15.06.2009-19.06.2009] R&D Projects: GA MŠk 7G09042; GA ČR GD202/08/H057 Institutional research plan: CEZ:AV0Z20430508 Keywords : Tokamak operation * Interlock * Personnel safety Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 1.143, year: 2010 http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6V3C-5003BXW-1&_user=6542793&_coverDate=07%2F31%2F2010&_rdoc=1&_fmt=high&_orig=search&_origin=search&_sort=d&_docanchor=&view=c&_acct=C000070123&_version=1&_urlVersion=0&_userid=6542793&md5=ef5794d05cc6530a905d1de43aa0ac6a&searchtype=a

  2. Artificial nanomachines based on interlocked molecules

    International Nuclear Information System (INIS)

    Credi, Alberto

    2006-01-01

    The extension of the concept of machine to the molecular level is of great interest for the growth of nanoscience and the development of nanotechnology. A molecular machine can be defined as an assembly of a discrete number of molecular components (that is, a supramolecular structure) designed to perform a function through the mechanical movements of its components, which occur under appropriate external stimulation. Hence, molecular machines contain a motor part, that is a device capable of converting energy into mechanical work. Molecular motors and machines operate via nuclear rearrangements and, like their macroscopic counterparts, are characterized by the kind of energy input supplied to make them work, the manner in which their operation can be monitored, the possibility to repeat the operation at will, i.e., establishing a cyclic process, the timescale needed to complete a cycle of operation, and the performed function. Owing to the progresses made in several branches of chemistry, and to the better understanding of the operation mechanisms of molecular machines of the biological world, it has become possible to design and construct simple prototypes of artificial molecular motors and machines. Some examples based on rotaxanes, catenanes, and related interlocked molecules will be described

  3. Portable x-ray fluorescence for the analysis of chromium in nail and nail clippings

    International Nuclear Information System (INIS)

    Fleming, David E.B.; Ware, Chris S.

    2017-01-01

    Assessment of chromium content in human nail or nail clippings could serve as an effective biomarker of chromium status. The feasibility of a new portable x-ray fluorescence (XRF) approach to chromium measurement was investigated through analysis of nail and nail clipping phantoms. Five measurements of 180 s (real time) duration were first performed on six whole nail phantoms having chromium concentrations of 0, 2, 5, 10, 15, and 20 µg/g. Using nail clippers, these phantoms were then converted to nail clippings, and assembled into different mass groups of 20, 40, 60, 80, and 100 mg for additional measurements. The amplitude of the chromium Kα characteristic x-ray energy peak was examined as a function of phantom concentration for all measurement conditions to create a series of calibration lines. The minimum detection limit (MDL) for chromium was also calculated for each case. The chromium MDL determined from the whole nail intact phantoms was 0.88±0.03 µg/g. For the clipping phantoms, the MDL ranged from 1.2 to 3.3 µg/g, depending on the mass group analyzed. For the 40 mg clipping group, the MDL was 1.2±0.1 µg/g, and higher mass collections did not improve upon this result. This MDL is comparable to chromium concentration levels seen in various studies involving human nail clippings. Further improvements to the portable XRF technique would be required to detect chromium levels expected from the lower end of a typical population. - Highlights: • Portable x-ray fluorescence (XRF) was explored as a technique to assess levels of chromium in human nails or nail clippings. • Results were found to depend on the mass of clipping sample provided. • Minimum detection limits for chromium were similar to concentration levels found in previous studies of human nail clippings.

  4. Despite the hair failing, nails thrive…

    Directory of Open Access Journals (Sweden)

    Samipa Samir Mukherjee

    2017-01-01

    Full Text Available Ectodermal dysplasias are defined as a group of congenital, nonprogressive, developmental syndromes with primary disorders in at least two ectoderm-derived structures namely eccrine glands, hair, nail and teeth. Pure hair and nail affecting ectodemal dysplasias are exceedingly rare in occurance and have been known to be associated with multiple abnormalities, such as keratoderma or ichthyosis, skeletal and hematological abnormalities, cardiac irregularities, mental or psychomotor retardation and cataracts. We herein report a case of hypotrichosis with trichorrhexis nodosa and twenty nail dystrophy- a hypohidrotic ectodermal dysplasia variant.

  5. NAIL SAMPLING TECHNIQUE AND ITS INTERPRETATION

    Directory of Open Access Journals (Sweden)

    TZAR MN

    2011-01-01

    Full Text Available The clinical suspicion of onychomyosis based on appearance of the nails, requires culture for confirmation. This is because treatment requires prolonged use of systemic agents which may cause side effects. One of the common problems encountered is improper nail sampling technique which results in loss of essential information. The unfamiliar terminologies used in reporting culture results may intimidate physicians resulting in misinterpretation and hamper treatment decision. This article provides a simple guide on nail sampling technique and the interpretation of culture results.

  6. The Photodynamic Bone Stabilization System: a minimally invasive, percutaneous intramedullary polymeric osteosynthesis for simple and complex long bone fractures

    Directory of Open Access Journals (Sweden)

    Vegt P

    2014-12-01

    Full Text Available Paul Vegt,1 Jeffrey M Muir,2 Jon E Block2 1Department of Surgery, Albert Schweitzer Hospital, Dordrecht, The Netherlands; 2The Jon Block Group, San Francisco, CA, USA Abstract: The treatment of osteoporotic long bone fractures is difficult due to diminished bone density and compromised biomechanical integrity. The majority of osteoporotic long bone fractures occur in the metaphyseal region, which poses additional problems for surgical repair due to increased intramedullary volume. Treatment with internal fixation using intramedullary nails or plating is associated with poor clinical outcomes in this patient population. Subsequent fractures and complications such as screw pull-out necessitate additional interventions, prolonging recovery and increasing health care costs. The Photodynamic Bone Stabilization System (PBSS is a minimally invasive surgical technique that allows clinicians to repair bone fractures using a light-curable polymer contained within an inflatable balloon catheter, offering a new treatment option for osteoporotic long bone fractures. The unique polymer compound and catheter application provides a customizable solution for long bone fractures that produces internal stability while maintaining bone length, rotational alignment, and postsurgical mobility. The PBSS has been utilized in a case series of 41 fractures in 33 patients suffering osteoporotic long bone fractures. The initial results indicate that the use of the light-cured polymeric rod for this patient population provides excellent fixation and stability in compromised bone, with a superior complication profile. This paper describes the clinical uses, procedural details, indications for use, and the initial clinical findings of the PBSS. Keywords: osteoporosis, long bone fracture, bone density, polymeric rod, orthopaedics, surgery

  7. Nails

    Science.gov (United States)

    ... Registration General information Housing & travel Education Exhibit hall Mobile app 2019 Annual Meeting Derm Exam Prep Course ... SkinPAC State societies Scope of practice Truth in advertising NP/PA laws Action center Public and patients ...

  8. Nail involvement in mycosis fungoides: brief report

    Directory of Open Access Journals (Sweden)

    Amir Houshang Ehsani

    2014-11-01

    Conclusion: We found about 30% prevalence that is a little higher than previously shown. It seems that nail changes in CTCL have no relationship to CTCL staging or other specifications including demographic specifications.

  9. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... like biting your nails, try playing with a stress ball or silly putty instead. This will help ... of hangnails, or other triggers, such as boredom, stress, or anxiety. By figuring out what causes you ...

  10. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... and away from your mouth. Identify your triggers: These could be physical triggers, such as the presence ... nails, you can figure out how to avoid these situations and develop a plan to stop. Just ...

  11. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Action center Public and patients SPOT Skin Cancer™ Community programs & events Learn about skin cancer Get involved ... Diseases: A-Z index Skin, hair, and nail care Skin care Hair care / hair loss Injured skin ...

  12. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Mohs AUC MyDermPath+ Psoriasis Patient education resources Practice Management Center Coding and reimbursement Coding MACRA Fee schedule ... as boredom, stress, or anxiety. By figuring out what causes you to bite your nails, you can ...

  13. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Rotation PICMED Grant Professionalism Award Resident-Fellow QI Project Award Resident International Grant Resident Scholarship to Legislative ... continue through adulthood, and the side effects can be more than cosmetic. Repeated nail biting can make ...

  14. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Learning Center MOC Recognized Credit Basic Derm Curriculum Teaching and learning guides Suggested order of modules Basement ... Injured skin Nail care Anti-aging skin care Kids’ zone About skin: Your body's largest organ About ...

  15. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Scholarship to Legislative Conference Skin Care for Developing Countries Grant State Advocacy Grant Strauss and Katz Scholarship ... like biting your nails, try playing with a stress ball or silly putty instead. This will help ...

  16. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... pointer nails, or even an entire hand. The goal is to get to the point where you ... c Explore the Academy Member resources Practice Tools Education Meetings & events Advocacy Public & patients Academy resources for: ...

  17. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Center Meetings and events Make a difference Career planning AAD apps Academy meeting Chronic urticaria—for members ... as boredom, stress, or anxiety. By figuring out what causes you to bite your nails, you can ...

  18. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... diseases Cosmetic treatments Dry / sweaty skin Eczema / dermatitis Hair and scalp problems Itchy skin Painful skin / joints ... dermatologist? Other conditions Diseases: A-Z index Skin, hair, and nail care Skin care Hair care / hair ...

  19. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Part 2: Origin Part 3: Function Textbook Study notes Image library 3-D animated image library Board ... gradually stop biting your nails: Some doctors recommend taking a gradual approach to break the habit. Try ...

  20. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Mohs AUC MyDermPath+ Psoriasis Patient education resources ... Try to gradually stop biting your nails: Some doctors recommend taking a gradual approach to break the habit. Try to stop biting ...

  1. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Mohs AUC MyDermPath+ Psoriasis Patient education resources Practice Management Center Coding and reimbursement Coding MACRA Fee schedule ... your nails: Some doctors recommend taking a gradual approach to break the habit. Try to stop biting ...

  2. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... facts about your skin, hair, and nails Skin dictionary Camp Discovery Good Skin Knowledge lesson plans and activities Video library Find a dermatologist Why see a board-certified dermatologist? Home ...

  3. NAIL SAMPLING TECHNIQUE AND ITS INTERPRETATION

    OpenAIRE

    TZAR MN; LEELAVATHI M

    2011-01-01

    The clinical suspicion of onychomyosis based on appearance of the nails, requires culture for confirmation. This is because treatment requires prolonged use of systemic agents which may cause side effects. One of the common problems encountered is improper nail sampling technique which results in loss of essential information. The unfamiliar terminologies used in reporting culture results may intimidate physicians resulting in misinterpretation and hamper treatment decision. This article prov...

  4. Nail disorders in children, a clinical study

    Directory of Open Access Journals (Sweden)

    Ayşe Akbaş

    2016-04-01

    Full Text Available Introduction: Aims of the study to investigate the frequency and the nature ofnail disorders in children significant clinical data is available. Nail disorders although common in children in some parts of our country. This study was carried out to document the clinical and demographic pattern of nail disorders in a dermatology outpatient clinic of a pediatric hospital in Ankara, Turkey. Material and Methods: All consecutive patients a total of 3000 children from age 0-16 were admitted to dermatology outpatient clinic of Ankara Pediatric Hematology and Oncology Education and Research Hospital during January 2011 to December 2011 were studied and retrospectively evaluated for age, gender, drug use, diseases, systemic or genetic disorders and demographic features. Diagnostic evaluation results were noted and patients were categorized for demographic features and diagnosis. Results: These 133 patients (M: F 58:75, %44 vs 56, respectively were under 16 years of age and have 17 different dermatological disorders related with nail symptoms. Fifty three of (39,8% these patient were under 2 years of age, 31 (23.3% were between 3-5 years, 30 (22.5% were between 6-11 years old, 19 of 133 (14%, 2 were between 11-16 years of age. Through all of ages and independent of gender the most etiologies of nail disorders were, onychomadesis, paronychia, onycholysis, onychomycosis and systemic nail presentation of systemic dermatosis. Conclusion: Nail disorders are different in children than in adults. In our study, the first 5 years of age was found in 53% of nail disorders. Nail disorders are uncommon but may be seen as a part of a systemic disease and may be associated with cosmetic and psychologic problem.

  5. Trace element analysis of nail polishes

    International Nuclear Information System (INIS)

    Misra, G.; Mittal, V.K.; Sahota, H.S.

    1999-01-01

    Instrumental neutron activation analysis (INAA) technique was used to measure the concentrations of various trace elements in nail polishes of popular Indian and foreign brands. The aim of the present experiment was to see whether trace elements could distinguish nail polishes of different Indian and foreign brands from forensic point of view. It was found that cesium can act as a marker to differentiate foreign and Indian brands. (author)

  6. Utility of gel nails in improving the appearance of cosmetically disfigured nails: Experience with 25 cases

    Directory of Open Access Journals (Sweden)

    Soni Nanda

    2014-01-01

    Full Text Available Background: Gel nails are a commonly used cosmetic procedure, though their use by dermatologists has not been evaluated. These can be used to improve the appearance of cosmetically disfigured nails where other treatment options have failed; the condition is self-limiting or irreversible; or to camouflage the dystrophy until healing. Materials and Methods: A prospective, uncontrolled, open-label study on 25 participants presenting with cosmetically disfigured nails was undertaken. Mycologically negative, consenting patients with various nail plate surface abnormalities like trachyonychia (n =8; superficial pitting (n =6; onychorrhexis (n =4; superficial pitting with onychoschizia (n =3; Beau′s lines (n =3 and pterygium (n =1 were included. The patients received gel nail application using Ranara gel nail kit ® . Extra care was taken to avoid any damage to cuticle. Standard pre- and post-treatment photographs were taken to assess improvement. Patient satisfaction score (1-10; Global assessment score of improvement (no improvement to excellent improvement and any side effects reported were recorded. Results: The average age of treated patients was 30.44±11.39 years (range 18-60 years. A total of 69 nails were treated (average of 2.76 per patient. Post-procedure, the average patient satisfaction score was 9.08 ± 0.86 (range 7-10. The Global assessment showed excellent improvement (40% cases; good improvement (56% cases and mild improvement in the single case of pterygium treated. Conclusions: The use of Gel nails in patients with cosmetically disfiguring nail plate surface abnormalities (like trachyonychia, onychoschizia, pitting, etc. was found to produce good to excellent improvement in most of the cases. The patient satisfaction with the procedure was rated as high. This, coupled with absence of side effects, make gel nails a valuable tool in improving cosmesis and satisfaction among patients presenting with nail plate surface abnormalities

  7. Snapping scapular syndrome secondary to rib intramedullary fixation device

    Directory of Open Access Journals (Sweden)

    Ezequiel E. Zaidenberg

    2015-01-01

    Conclusion: Surgeons should pay attention to any protrusion of intramedullary rib implants, especially in the evaluation of routine X-rays following surgical treatment. We should be aware of the possibility of this rare cause of snapping scapula syndrome to avoid delayed diagnosis and consider removing the implant will resolve the pain.

  8. Intramedullary cavernous haemangioma of spinal cord: A case ...

    African Journals Online (AJOL)

    Thoracic myelography done showed bilateral symmetrical funnelling of the contrast at the level of T5 with widening of the spinal cord, which are typical characteristics of an intramedullary mass of spinal cord. T2-T6 Laminectomy was done. Near total excision of a 4 by 2.5 cm intradural, intramedulary bluish black, necrotic, ...

  9. Nail Psoriasis: A Review of Treatment Options.

    Science.gov (United States)

    Pasch, Marcel C

    2016-04-01

    Nail involvement affects 80-90 % of patients with plaque psoriasis, and is even more prevalent in patients with psoriatic arthritis. This review is the result of a systemic approach to the literature and covers topical, intralesional, conventional systemic, and biologic systemic treatments, as well as non-pharmacological treatment options for nail psoriasis. The available evidence suggests that all anti-tumor necrosis factor-α, anti-interleukin (IL)-17, and anti-IL-12/23 antibodies which are available for plaque psoriasis and psoriatic arthritis are highly effective treatments for nail psoriasis. Conventional systemic treatments, including methotrexate, cyclosporine, acitretin, and apremilast, as well as intralesional corticosteroids, can also be effective treatments for nail psoriasis. Topical treatments, including corticosteroids, calcipotriol, tacrolimus, and tazarotene, have also been shown to have a position in the treatment of nail psoriasis, particularly in mild cases. Finally, non-pharmacological treatment options, including phototherapy, photodynamic therapy, laser therapy, and several radiotherapeutic options, are also reviewed but cannot be advised as first-line treatment options. Another conclusion of this review is that the lack of a reliable core set of outcomes measures for trials in nail psoriasis hinders the interpretation of results, and is urgently needed.

  10. Nails in Forensic Toxicology: An Update.

    Science.gov (United States)

    Solimini, Renata; Minutillo, Adele; Kyriakou, Chrystalla; Pichini, Simona; Pacifici, Roberta; Busardo, Francesco Paolo

    2017-01-01

    The analysis of nails as a keratinized matrix to detect drugs or illicit substances has been increasingly used in forensic and clinical toxicology as a complementary test, especially for the specific characteristics of stably accumulating substances for long periods of time. This allows a retrospective investigation of chronic drug abuse, monitoring continuous drug or pharmaceutical use, reveal in utero drug exposure or environmental exposures. We herein review the recent literature investigating drug incorporation mechanisms and drug detection in nails for forensic toxicological purposes. Mechanisms of drug incorporation have not yet been fully elucidated. However, some research has lately contributed to a better understanding of how substances are incorporated into nails, suggesting three potential mechanisms of drug incorporation: contamination from sweat, incorporation from nail bed and incorporation from germinal matrix. In addition, numerous methods dealing with the determination of drugs of abuse, medications and alcohol biomarkers in nails have been reported in studies over the years. The latter methods could find application in clinical and forensic toxicology. The studies herein reviewed point out how important it is to standardize and harmonize the methodologies (either pre-analytical or analytical) for nails analysis and the optimization of sampling as well as the development of proficiency testing programs and the determination of cut-off values. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  11. Heat profiles of laser-irradiated nails.

    Science.gov (United States)

    Paasch, Uwe; Nenoff, Pietro; Seitz, Anna-Theresa; Wagner, Justinus A; Kendler, Michael; Simon, Jan C; Grunewald, Sonja

    2014-01-01

    Onychomycosis is a worldwide problem with no tendency for self-healing, and existing systemic treatments achieve disease-free nails in only 35 to 76% of cases. Recently, treatment of nail fungus with a near-infrared laser has been introduced. It is assumed that fungal eradication is mediated by local heat. To investigate if laser treatment has the potential to eradicate fungal hyphae and arthrospores, laser heat application and propagation needs to be studied in detail. This study aimed to measure nail temperatures using real-time videothermography during laser irradiation. Treatment was performed using 808- and 980-nm linear scanning diode lasers developed for hair removal, enabling contact-free homogeneous irradiation of a human nail plate in one pass. Average and peak temperatures increased pass by pass, while the laser beam moved along the nail plates. The achieved mean peak temperatures (808 nm: 74.1 to 112.4°C, 980 nm: 45.8 to 53.5°C), as well as the elevation of average temperatures (808 nm: 29.5 to 38.2°C, 980 nm: 27.1 to 32.6°C) were associated with pain that was equivalent to that of hair removal procedures and was not significantly different for various wavelengths. The linear scanning laser devices provide the benefits of contact-free homogeneous heating of the human nail while ensuring adequate temperature rises.

  12. Augmentation of proximal femoral nail in unstable trochanteric fractures

    Directory of Open Access Journals (Sweden)

    Gadegone Wasudeo M.

    2017-01-01

    Full Text Available Introduction: Biomechanically proximal femoral nail (PFN is a better choice of implant, still it is associated with screw breakage, cut out of screw through femoral head, Z effect, reverse Z effect, and lateral migration of screws. The purpose of this study is to evaluate the results of augmented PFN in terms of prevention of postoperative complications and failure rates in unstable trochanteric fractures. Material and methods: We carried out a prospective study of 82 cases with unstable trochanteric femoral fractures from April 2010 to December 2015. Forty-two females and 40 males in the age group between 58 and 81 years were included in this study. There were 45 cases of AO 31 A2 (2.2, 2.3 and 37 cases of AO 31 A3 (3.1, 3.2, 3.3. Fractures were fixed by PFN with augmentation by an additional screw from trochanter to inferior quadrant of femoral head or cerclage wire to strengthen the lateral trochanteric wall. Results: The bone healing is observed in all the cases in the mean period of 14.2 weeks. Nine patients developed complications, including lateral migration of neck screws (n = 5, Z effect (n = 1, infection (n = 2, and breakage of distal interlocking bolt in one case. Removal of screws was required in five cases. Patients were followed up for a mean of 8.4 months. At the end of follow-up the Salvati and Wilson hip function was 32 (out of 40 in 88% of patients. Conclusion: The stabilization of lateral trochanteric wall with additional screw or cerclage wire increases the stability of construct.

  13. Nail gun injuries among construction workers.

    Science.gov (United States)

    Dement, John M; Lipscomb, Hester; Li, Leiming; Epling, Carol; Desai, Tejas

    2003-05-01

    Pneumatic nail guns greatly increase worker productivity and are extensively used in wood frame building construction, with especially high use in residential construction. One surveillance report of nail gun injuries in Washington State has been published; however, other literature consists largely of case reports and case series in trauma journals. The major objective of the current study was to investigate the occurrence of nail gun-associated injuries among construction workers and to identify preventable work-related factors associated with these injuries. Nail gun-related injuries occurring among a cohort of 13,347 carpenters in Ohio who worked union hours during the time period January 1, 1994, until September 30, 1997, were identified by matching the cohort with workers' compensation claims made to the Ohio Bureau of Workers' Compensation. We also analyzed workers' compensation claims for North Carolina Home Builders Association members for the period July 1996-November 1999 to identify nail gun-related injuries. Analyses included stratified analyses of claims by nature and body part injured, calculation of nail gun injury rates, and analyses of free text descriptions of injuries. Overall, nail gun injuries were responsible for 3.9 percent of workers' compensation claims with 8.3 percent to 25.5 percent of claims involving paid lost work time. The overall rate of nail gun injuries (cases per 200,000 work hours) was 0.33 in North Carolina and 0.26 in Ohio, reflecting the greater concentration of wood frame construction workers in the North Carolina population studied. Higher rates of injury were observed for carpenters in North Carolina and among residential carpenters in Ohio. The predominant body part injured was the hands/fingers, with 80 to 89 percent of injuries being nail punctures. Analyses of free text information for puncture injuries found approximately 70 percent of injuries to occur during the framing/sheathing stage of construction. Our data

  14. RF generator interlock by plasma grid bias current - An alternate to Hα interlock

    Science.gov (United States)

    Bandyopadhyay, M.; Gahlaut, A.; Yadav, R. K.; Pandya, K.; Tyagi, H.; Vupugalla, M.; Bhuyan, M.; Bhagora, J.; Chakraborty, A.

    2017-08-01

    ROBIN is inductively coupled plasma (ICP) based negative hydrogen ion source, operated with a 100kW, 1MHz Tetrode based RF generator (RFG). Inductive plasma ignition by the RFG in ROBIN is associated with electron seeding by a hot filament and a gas puff. RFG is triggered by the control system to deliver power just at the peak pressure of the gas puff. Once plasma is ignited due to proper impedance matching, a bright light, dominated by Hα (˜656nm wavelength) radiation is available inside RF driver which is used as a feedback signal to the RFG to continue its operation. If impedance matching is not correct, plasma is not produced due to lack of power coupling and bright light is not available. During such condition, reflected RF power may damage the RFG. Therefore, to protect the RFG, it needs to be switched off automatically within 200ms by the control system in such cases. This plasma light based RFG interlock is adopted from BATMAN ion source. However, in case of vacuum immersed RF ion source in reactor grade NBI system, such plasma light based interlock may not be feasible due to lack of adequate optical fiber interfaces. In reactor grade NBI system, neutron and gamma radiations have impact on materials which may lead to frequent maintenance and machine down time. The present demonstration of RFG interlock by Bias Current (BC) in ROBIN testbed gives an alternate option in this regard. In ROBIN, a bias plate (BP) is placed in the plasma chamber near the plasma grid (PG). BP is electrically connected to the plasma chamber wall of the ion source and PG is isolated from the wall. A high current ˜85 A direct current (DC) power supply of voltage in the range of 0 - 33V is connected between the PG and the BP in such a way that PG can be biased positively with respect to the BP or plasma chamber. This arrangement is actually made to absorb electrons and correspondingly reduce co-extracted electron current during beam extraction. However, in case of normal plasma

  15. Poly[n]catenanes: Synthesis of molecular interlocked chains

    Science.gov (United States)

    Wu, Qiong; Rauscher, Phillip M.; Lang, Xiaolong; Wojtecki, Rudy J.; de Pablo, Juan J.; Hore, Michael J. A.; Rowan, Stuart J.

    2017-12-01

    As the macromolecular version of mechanically interlocked molecules, mechanically interlocked polymers are promising candidates for the creation of sophisticated molecular machines and smart soft materials. Poly[n]catenanes, where the molecular chains consist solely of interlocked macrocycles, contain one of the highest concentrations of topological bonds. We report, herein, a synthetic approach toward this distinctive polymer architecture in high yield (~75%) via efficient ring closing of rationally designed metallosupramolecular polymers. Light-scattering, mass spectrometric, and nuclear magnetic resonance characterization of fractionated samples support assignment of the high-molar mass product (number-average molar mass ~21.4 kilograms per mole) to a mixture of linear poly[7-26]catenanes, branched poly[13-130]catenanes, and cyclic poly[4-7]catenanes. Increased hydrodynamic radius (in solution) and glass transition temperature (in bulk materials) were observed upon metallation with Zn2+.

  16. A Retrospective View to the Magnet Interlock Systems at CERN

    CERN Document Server

    Romera, I; Mompo, R; Puccio, B; Zerlauth, M

    2014-01-01

    Several thousands of both, superconducting and normal conducting magnets are in charge of guiding the particle beams in CERN’s accelerator complex. In order to protect the magnet and powering equipment from damage, dedicated magnet interlock and protection systems are deployed throughout the various accelerators and transfer lines. These systems have worked extremely well during the first years of LHC operation, providing highly dependable interlocking of magnet powering based on industrial COTS components. This paper reviews the performance and experience with more than 70 individual installations during the first LHC running period and compares the operational experience with the initial expectations of dependability. Additional improvements required to address specific operational needs and observed shortcomings are presented. Finally, we review the existing magnet interlock infrastructure in the LHC injector complex and the ongoing renovation works during the first long shutdown.

  17. PLC-based interlock system for superconducting magnets

    International Nuclear Information System (INIS)

    Agostini, R.C.; Barker, L.; Hodgers, J.; Reagan, D.; Walz, H.V.

    1989-01-01

    Conventional interlock systems rely heavily on hard-wired electromagnetic relays. Although this approach is well understood and has proven to be reliable, several drawbacks plague the designer as well as the repairman. If larger systems have to be implemented in relay logic, the complexity limit is soon reached; the systems become too bulky, and wiring expenses sky-rocket; moreover, the intelligence of those designs is limited in such a way that desirable features such as self-tests have to be left out. Additionally, relay interlocks are inherently inflexible: if the configuration of the system they protect has to change, a disproportional amount of time, work and money has to be invested in order to adapt the hard-wiring of the interlock system to the new requirements. Repair work is often unnecessarily delayed due to the lack of adequate documentation

  18. Optimal management of nail disease in patients with psoriasis

    Directory of Open Access Journals (Sweden)

    Piraccini BM

    2015-01-01

    Full Text Available Bianca Maria Piraccini, Michela Starace Division of Dermatology, Department of Experimental, Diagnostic and Specialty Medicine, University of Bologna, Bologna, Italy Abstract: Psoriasis is a common skin disease, with nail involvement in approximately 80% of patients. Nail psoriasis is often associated with psoriatic arthropathy. Involvement of the nails does not always have relationship with the type, gravity, extension, or duration of skin psoriasis. Nail psoriasis can occur at any age and all parts of the nails and the surrounding structures can be affected. Two clinical patterns of nail manifestations have been seen due to psoriasis: nail matrix involvement or nail bed involvement. In the first case, irregular and deep pitting, red spots of the lunula, crumbling, and leukonychia are seen; in the second case, salmon patches, onycholysis with erythematous border, subungual hyperkeratosis, and splinter hemorrhages are observed. These clinical features are more visible in fingernails than in toenails, where nail abnormalities are not diagnostic and are usually clinically indistinguishable from other conditions, especially onychomycosis. Nail psoriasis causes, above all, psychosocial and aesthetic problems, but many patients often complain about functional damage. Diagnosis of nail psoriasis is clinical and histopathology is necessary only in selected cases. Nail psoriasis has an unpredictable course but, in most cases, the disease is chronic and complete remissions are uncommon. Sun exposure does not usually improve and may even worsen nail psoriasis. There are no curative treatments. Treatment of nail psoriasis includes different types of medications, from topical therapy to systemic therapy, according to the severity and extension of the disease. Moreover, we should not underestimate the use of biological agents and new therapy with lasers or iontophoresis. This review offers an investigation of the different treatment options for nail

  19. Interlock System for the COMPASS Tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Hron, M.; Adamek, J.; Pisacka, J.; Panek, R. [Institute of Plasma Physics AS CR, Association EURATOM/IPP.CR, Prague (Czech Republic); Sova, J.; Siba, J.; Kovarj, J. [Department of Control Engineering, Faculty of Electrical Engineering, Prague (Czech Republic)

    2009-07-01

    Full text of publication follows: The COMPASS tokamak (R=0.56 m, a=0.18 - 0.23 m) is starting operation presently at Institute of Plasma Physics AS CR in Prague. An important issue of the operation is the safety of the personnel and machine protection against faults, presented in this contribution. The personnel protection is based on a restricted access into the experimental hall during the operation of potentially dangerous systems. A tokamak hall access system, based on Honeywell WIN-PAK (tm) 2005, allows to set the status of the experimental area (open/closed) and to control the in and out movement of persons using access cards. On top of this, a check of the whole experimental area by the operator is enforced before the hall enclosure. A hardware interlock then interprets the experimental hall status and controls the operation of key systems accordingly. The permit for operation is granted and the real status of the systems is reported by hard wired potential less contacts. The control procedure is based on a PLC MicroPEL M66. This PLC provides HW interface between Actuators (Relays and switches) and it is connected on PESNET bus. Its programming is done using language Simple v.2 in Winstudio IDE. Second site of personnel protection system is created on PC where runs a .NET application on MSWindows XP or 2000. This PC is connected with PLC via PESNET bus (on RS485 layer) and it generates all control signals to PLC from the operator. Simultaneously, the PC receives all warning and alarm signals from the PLC. This signals are displayed on a screen of the PC in real-time, this way the GUI provides visualization of the controlled process. Except for this fact the operator is informed about the status of the system and individual subsystems on a PC via an operator's panel. Further we will describe the machine protection which uses similar system for checking conditions for the start of a shot. Fast key processes which have to be checked during the shot are

  20. Design review report for the hydrogen interlock preliminary design

    International Nuclear Information System (INIS)

    Corbett, J.E.

    1996-01-01

    This report documents the completion of a preliminary design review for the hydrogen interlock. The hydrogen interlock, a proposed addition to the Rotary Mode Core Sampling (RMCS) system portable exhauster, is intended to support core sampling operations in waste tanks requiring flammable gas controls. The objective of this review was to validate basic design assumptions and concepts to support a path forward leading to a final design. The conclusion reached by the review committee was that the design was acceptable and efforts should continue toward a final design review

  1. Formal Modeling and Verification of Interlocking Systems Featuring Sequential Release

    DEFF Research Database (Denmark)

    Vu, Linh Hong; Haxthausen, Anne Elisabeth; Peleska, Jan

    2015-01-01

    In this paper, we present a method and an associated tool suite for formal verification of the new ETCS level 2 based Danish railway interlocking systems. We have made a generic and reconfigurable model of the system behavior and generic high-level safety properties. This model accommodates seque...... SMT based bounded model checking (BMC) and inductive reasoning, we are able to verify the properties for model instances corresponding to railway networks of industrial size. Experiments also show that BMC is efficient for finding bugs in the railway interlocking designs....

  2. Formal Modeling and Verification of Interlocking Systems Featuring Sequential Release

    DEFF Research Database (Denmark)

    Vu, Linh Hong; Haxthausen, Anne Elisabeth; Peleska, Jan

    2014-01-01

    In this paper, we present a method and an associated tool suite for formal verification of the new ETCS level 2 based Danish railway interlocking systems. We have made a generic and reconfigurable model of the system behavior and generic high-level safety properties. This model accommodates seque...... SMT based bounded model checking (BMC) and inductive reasoning, we are able to verify the properties for model instances corresponding to railway networks of industrial size. Experiments also show that BMC is efficient for finding bugs in the railway interlocking designs....

  3. Nail psoriasis: clinical features, pathogenesis, differential diagnoses, and management

    Directory of Open Access Journals (Sweden)

    Haneke E

    2017-10-01

    Full Text Available Eckart Haneke1–4 1Department of Dermatology, Inselspital, University of Bern, Bern, Switzerland; 2Dermatology Practice Dermaticum, Freiburg, Germany; 3Centro de Dermatología Epidermis, Instituto CUF, Porto, Portugal; 4Department of Dermatology, University Hospital, Gent, Belgium Abstract: Psoriasis is the skin disease that most frequently affects the nails. Depending on the very nail structure involved, different clinical nail alterations can be observed. Irritation of the apical matrix results in psoriatic pits, mid-matrix involvement may cause leukonychia, whole matrix affection may lead to red lunulae or severe nail dystrophy, nail bed involvement may cause salmon spots, subungual hyperkeratosis, and splinter hemorrhages, and psoriasis of the distal nail bed and hyponychium causes onycholysis whereas that of the proximal nail fold causes psoriatic paronychia. The more extensive the involvement, the more severe is the nail destruction. Pustular psoriasis may be seen as yellow spots under the nail or, in case of acrodermatitis continua suppurativa, as an insidious progressive loss of the nail organ. Nail psoriasis has a severe impact on quality of life and may interfere with professional and other activities. Management includes patient counseling, avoidance of stress and strain to the nail apparatus, and different types of treatment. Topical therapy may be tried but is rarely sufficiently efficient. Perilesional injections with corticosteroids and methotrexate are often beneficial but may be painful and cannot be applied to many nails. All systemic treatments clearing widespread skin lesions usually also clear the nail lesions. Recently, biologicals were introduced into nail psoriasis treatment and found to be very effective. However, their use is restricted to severe cases due to high cost and potential systemic adverse effects. Keywords: nail psoriasis, etiology, pathology, quality of life, impact, treatment

  4. 49 CFR 236.312 - Movable bridge, interlocking of signal appliances with bridge devices.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Movable bridge, interlocking of signal appliances with bridge devices. 236.312 Section 236.312 Transportation Other Regulations Relating to... SYSTEMS, DEVICES, AND APPLIANCES Interlocking Standards § 236.312 Movable bridge, interlocking of signal...

  5. 49 CFR 236.340 - Electromechanical interlocking machine; locking between electrical and mechanical levers.

    Science.gov (United States)

    2010-10-01

    ... Electromechanical interlocking machine; locking between electrical and mechanical levers. In electro-mechanical interlocking machine, locking between electric and mechanical levers shall be maintained so that mechanical... 49 Transportation 4 2010-10-01 2010-10-01 false Electromechanical interlocking machine; locking...

  6. Estimation of arsenic in nail using silver diethyldithiocarbamate method

    Directory of Open Access Journals (Sweden)

    Habiba Akhter Bhuiyan

    2015-08-01

    Full Text Available Spectrophotometric method of arsenic estimation in nails has four steps: a washing of nails, b digestion of nails, c arsenic generation, and finally d reading absorbance using spectrophotometer. Although the method is a cheapest one, widely used and effective, it is time consuming, laborious and need caution while using four acids.

  7. Guidance on maintaining personal hygiene in nail care.

    Science.gov (United States)

    Malkin, Bridget; Berridge, Pat

    Nail care is important in the maintenance of personal hygiene and is an essential aspect of patient care. Confusion about who should perform nail care for patients has resulted in poor practice and cycles of non-activity. This article provides guidance for nurses on performing routine nail care.

  8. Withdrawal Strength and Bending Yield Strength of Stainless Steel Nails

    Science.gov (United States)

    Douglas R. Rammer; Samuel L. Zelinka

    2015-01-01

    It has been well established that stainless steel nails have superior corrosion performance compared to carbon steel or galvanized nails in treated wood; however, their mechanical fastening behavior is unknown. In this paper, the performance of stainless steel nails is examined with respect to two important properties used in wood connection design: withdrawal strength...

  9. A computational study on the effect of fracture intrusion distance in three- and four-part trochanteric fractures treated with Gamma nail and sliding hip screw.

    Science.gov (United States)

    Goffin, Jérôme M; Pankaj, Pankaj; Simpson, A Hamish

    2014-01-01

    Using finite element analysis, the behaviors of the Gamma nail and the sliding hip screw (SHS) were compared in an osteoporotic bone model for the fixation of three- and four-part trochanteric fractures (31-A2 in the AO classification, types IV and V in Evans' classification). The size of the medial fragment was varied based on clinical data, and the case of a fractured greater trochanter was also considered. Our results showed that for Evans' type V stabilized with a Gamma nail and for Evans' types IV and V with the SHS, cancellous bone around the lag screw is susceptible to yielding, thus indicating a risk of cut-out. The volume of bone susceptible to yielding increases with an increase in size of the medial fragment. Conversely, Evans' type IV with a Gamma nail was not predicted to cut out. Our findings suggest that future clinical trials investigating fixation of unstable proximal fractures should include the size of the medial fragment and the integrity of the greater trochanter as covariables and be powered to evaluate whether intramedullary devices are superior to SHSs for Evans' type IV fractures and inferior/equivalent for type V. © 2013 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

  10. Homodyne reflectometer for NBI interlock on Large Helical Device

    International Nuclear Information System (INIS)

    Tanaka, Kenji; Ito, Yasuhiko; Kawahata, Kazuo; Tokuzawa, Tokihiko; Osakabe, Masaki; Takeiri, Yasuhiko; Ejiri, Akira

    2001-01-01

    Neutral Beam Injection (NBI) under low density causes serious damage on vacuum vessel wall. It is necessary to stop NBI when electron density becomes lower than 1x10 19 m -3 . This needs reliable density monitor for NBI interlock. A three-channel homodyne reflectometer was installed on Large Helical Device (LHD) and was used for NBI interlock. 28.5, 34.9 and 40.2 GHz Gunn oscillators were used with O mode injection. Their O mode cut off density correspond to 1x10 19 , 1.5x10 19 and 2x10 19 m -3 respectively. The simple homodyne detection is presently used. When the density reaches to the cutoff density, the reflected signals are detected. The reflected signal consists of DC signal due to local and reflected power, and AC signal due to position of cut off layer and density fluctuation. Since the change of DC signal at lower and higher than cut off density was very small, root mean square (RMS) value of AC signal were used for interlock signal. This interlock system is successfully working from the beginning of the NBI experiments campaign on LHD. (author)

  11. Board and auditor interlocks and voluntary disclosure in annual reports

    NARCIS (Netherlands)

    Braam, G.J.M.; Borghans, L.

    2014-01-01

    Purpose – The purpose of this study is to explore whether interlock ties between the board of directors and the external auditors facilitate the cross-firm diffusion of voluntary disclosures in annual reports. Design/methodology/approach – Using a sample of 149 non-financial companies publicly

  12. Total excision of intramedullary epidermoid cyst in one case

    Directory of Open Access Journals (Sweden)

    PU Ke

    2013-12-01

    Full Text Available Clinical experience of total excision in a 14-year-old female with intramedullary epidermoid cyst was reported. The patient with L3-4 intramedullary epidermoid cyst underwent total excision through posterior median approach under microscopy. The patient was admitted for progressive strephexopodia and urinary and fecal incontinence. Preoperative imaging examination showed scoliosis, incontionous L4-S1 and abnormal signal of L3-4. Total excision and spinal remodeling were performed under intraoperative neurophysiological monitoning. Epidermoid cyst and its membrane were totally removed without aseptic meningitis after surgery, and the neurologic symptoms of the patient were gradually improved. Completely removing the membrane of epidermoid cyst is the key point to prevent recurrence and aseptic meningitis postoperatively. Dissection should be strictly in accordance with the boundaries of the membrane and the spinal cord, in order to avoid spinal cord injury.

  13. [Intramedullary osteosynthesis of distal metacarpal fractures with curved wires].

    Science.gov (United States)

    Schlageter, M; Winkel, R; Porcher, R; Haas, H G

    1997-07-01

    When intramedullary pinning is used to treat metacarpal fractures, as recently described by Förstner (1994) and Foucher (1995), the closed reduction technique developed by Jahss (1938) is applied in the same way as for conservative fracture treatment. It is not always possible to achieve complete anatomical reduction using this closed technique. The intramedullary pinning technique, that we have applied since 1989, involves a Kirschner wire which is bent at one end. Apart from reducing the fracture, the pre-set Kirschner wire serves as a butressing internal fixator. The elastic clamping of the wire acts as an internal wire spring splint, permitting early mobilisation. We have operated on 62 metacarpal fractures using the above-mentioned technique over a period of 6 years until 1995. Anatomic reduction was realized in 50 of 62 fractures. In the follow-up of 32 fractures, we noticed four complications: one infection, two paraesthesias, and one non-union.

  14. MR imaging of intramedullary ischemia due to cervical spondylosis

    International Nuclear Information System (INIS)

    Dooms, G.; Mathurin, P.; Cornelis, G.; Hulcelle, P.

    1988-01-01

    A retrospective study was performed to assess the value of MR imaging for detecting intramedullary ischemia due to cervical spondylosis and to assess its clinical significance. One hundred consecutive unselected patients (70 men and 30 women, mean age = 62 years) were included in the study. All patients were treated surgically, either by anterior diskectomy and corporectomy or by posterior laminectomy. Clinical follow-up to 2 years was available for every patient. MR imaging was performed with a superconducting magnet (Philips Gyroscan S15) operating at 1.5T Sagittal T1-weighted (repetition time [TR] = 0.45 sec and echo time [TE] = 30 msec) and cardiac-gated T2-weighted (TR>1.2 sec and multiples TE of 50, 100 and 200 msc) imaging was performed in every patient. Cervical spondylosis was exquisitely demonstrated on MR images in every patient. With the sagittal plane, full extent and the degree of canalar stenosis were easily appreciated on T2-weighted images. A hyperintense intramedullary lesion was detected preoperatively in 24 of the patients and corresponded presumably to ischemic, edematous, and/or necrotic damage to the cord. It was usually located at the level or just below the level where the most severe canalar stenosis was demonstrated; it was identified only on T2-weighted images. In a comparison of the clinical outcome of the patients after surgery, there was a striking difference between the group of patients without and that with intramedullary lesions. In the first group, the relief of symptoms after surgery was partial or complete. In the other group, the clinical outcome was poor and symptom relief nearly absent. In conclusion, MR imaging is an exquisite modality for demonstrating necrotic intramedullary changes due to cervical spondylosis and thus may aid in determining the prognosis for surgery and clinical outcome of the patients

  15. Clinical features and nail clippings in 52 children with psoriasis.

    Science.gov (United States)

    Uber, Marjorie; Carvalho, Vânia O; Abagge, Kerstin T; Robl Imoto, Renata; Werner, Betina

    2018-03-01

    Nail clipping, the act of cutting the distal portion of a nail for microscopic analysis, can complement the diagnosis of skin diseases with nail involvement, such as psoriasis. This study aimed to describe histopathologic findings on 81 nails from 52 children and adolescents with skin psoriasis and to determine whether these changes correlated with the severity of skin and nail involvement. Children with psoriasis were enrolled in this cross-sectional study to obtain Psoriasis Area and Severity Index (PASI) and Nail Psoriasis Severity Index (NAPSI) scores. The most altered nails were processed using periodic acid-Schiff with diastase staining. Fifty-two patients with a median age of 10.5 years were included. The median Nail Psoriasis Severity Index score of the 20 nails from these patients was 17 (range 3-80). The most common findings were pitting (94.2%), leukonychia (73.0%), and longitudinal ridges (63.5%). Eighty-one nail fragments were collected by clipping. Neutrophils were found in 6 samples (7.6%) and serous lakes in 15 (19%). Median nail plate thickness was 0.3 mm (range 0.1-0.63 mm). Patients whose nails had neutrophils had a higher median PASI score (6.1 vs 2.0, P = .03). Patients whose nails had serous lakes had higher median PASI (5.3 vs 1.9, P = .008) and NAPSI (median 45.0 vs 18.0, P = .006) scores. There seems to be a correlation between some microscopic nail features in children with psoriasis and their PASI and NAPSI scores, so nail clippings from children with suspected psoriasis may help with diagnosis, especially in the presence of neutrophils, and in excluding onychomycosis. © 2018 Wiley Periodicals, Inc.

  16. Neurobrucellosis presenting as an intra-medullary spinal cord abscess

    Directory of Open Access Journals (Sweden)

    Patil Chidanand S

    2005-09-01

    Full Text Available Abstract Background Of the diverse presentation of neurobrucellosis, intra-medullary spinal cord abscess is extremely rare. Only four other cases have been reported so far. We present a case of spinal cord intra-medullary abscess due to Brucella melitensis. Case presentation A forty-year-old female presented with progressive weakness of both lower limb with urinary incontinence of 6 months duration. She was febrile. Neurological examination revealed flaccid areflexic paraplegia with T10 below sensory impairment including perianal region. An intramedullary mass was diagnosed on Magnetic Resonance Image (MRI scan extending from T12 to L2. At surgery, a large abscess was encountered at the conus medullaris, from which Brucella melitensis was grown on culture. She was started on streptomycin and doxycycline for 1 month, followed by rifampicin and doxycycline for 1 month. At 2-year follow-up, she had recovered only partially and continued to have impaired bladder function. Conclusion Neurobrucellosis, if not treated early, can result in severe neurological morbidity and sequale, which may be irreversible. Hence it is important to consider the possibility of neurobrucellosis in endemic region and treat aggressively.

  17. “Kissing Nail Technique” for the exchange of intramedullary implants in adjacent peri-implant fractures

    Directory of Open Access Journals (Sweden)

    Carolin Melcher

    2017-12-01

    We found this new customized procedure accommodating to the unique anatomical features of a single patient, that can be applied as a strategy especially for osteoporotic patients with periprosthetic fractures.

  18. Reconstruction of large diaphyseal bone defect by simplified bone transport over nail technique: A 7-case series.

    Science.gov (United States)

    Ferchaud, F; Rony, L; Ducellier, F; Cronier, P; Steiger, V; Hubert, L

    2017-11-01

    Reconstruction of large diaphyseal bone defect is complex and the complications rate is high. This study aimed to assess a simplified technique of segmental bone transport by monorail external fixator over an intramedullary nail.A prospective study included 7 patients: 2 femoral and 5 tibial defects. Mean age was 31years (range: 16-61years). Mean follow-up was 62 months (range: 46-84months). Defects were post-traumatic, with a mean length of 7.2cm (range: 4 to 9.5cm). For 3 patients, reconstruction followed primary failure. In 4 cases, a covering flap was necessary. Transport used an external fixator guided by an intramedullary nail, at a rate of 1mm per day. One pin was implanted on either side of the distraction zone. The external fixator was removed 1 month after bone contact at the docking site. Mean bone transport time was 11 weeks (range: 7-15 weeks). Mean external fixation time was 5.1months (range: 3.5 to 8months). Full weight-bearing was allowed 5.7months (range: 3.5-13months) after initiation of transport. In one patient, a pin had to be repositioned. In 3 patients, the transported segment re-ascended after external fixatorablation, requiring repeat external fixation and resumption of transport. There was just 1 case of superficial pin infection. Reconstruction quality was considered "excellent" on the Paley-Marr criteria in 6 cases. The present technique provided excellent reconstruction quality in 6 of the 7 cases. External fixation time was shorter and resumption of weight-bearing earlier than with other reconstruction techniques, notably including bone autograft, vascularized bone graft or the induced membrane technique. Nailing facilitated control of limb axis and length. The complications rate was 50%, comparable to other techniques. This study raises the question of systematic internal fixation of the docking site, to avoid any mobilization of the transported segment. The bone quality, axial control and rapidity shown by the present technique make

  19. [Intramedullary stabilisation of displaced midshaft clavicular fractures: does the fracture pattern (simple vs. complex) influence the anatomic and functional result].

    Science.gov (United States)

    Langenhan, R; Reimers, N; Probst, A

    2014-12-01

    Displaced midshaft clavicular fractures are often treated operatively. The most common way of treatment is plating. Elastic stable intramedullary nailing (ESIN) is an alternative, but seldom used. Studies showed comparable or even better results for intramedullary nailing than for plating in simple 2- or 3-fragment midshaft fractures. The indication of ESIN for multifragmentary clavicular fractures is discussed critically in the literature because of reduced primary stability and danger of secondary shortening. Until now only few studies report functional results after fracture healing depending on the fracture type. To the best of our knowledge there is no study showing significantly worse functional scores for ESIN in complex displaced midshaft fractures. The objective of this study was to examine anatomic and functional results of simple (2 or 3 fragments, OTA type 15B1 and 15B2) and complex (multifragmentary, OTA type 15B3) displaced midshaft clavicula fractures after internal fixation. Between 2009 and 2012, 40 patients (female/male 10/30; mean age 33 [16-60] years) with closed displaced midshaft clavicular fractures were treated by open reduction and ESIN (Titanium Elastic Nail [TEN], Synthes, Umkirch, Germany). Thirty-seven patients were retrospectively analysed after a mean of 27 (12-43) months. Twenty patients (group A) had simple fractures (OTA type 15B1 and 15B2), 17 patients (group B) had complex fractures (OTA type 15B3). All shoulder joints were postoperatively treated functionally for six weeks without weight limited to 90° abduction/flexion. Both groups were comparable in gender, age, body mass index, months until metal removal, number of physiotherapy sessions and time until follow-up examination. Joint function (neutral zero method) and strength (standing patient with arm in 90° abduction, holding 1-12 kg for 5 sec) in both shoulders were documented. The distance between the centre of the jugulum and the lateral acromial border was measured for

  20. Sliding hip screw versus IM nail in reverse oblique trochanteric and subtrochanteric fractures. A study of 2716 patients in the Norwegian Hip Fracture Register.

    Science.gov (United States)

    Matre, Kjell; Havelin, Leif Ivar; Gjertsen, Jan-Erik; Vinje, Tarjei; Espehaug, Birgitte; Fevang, Jonas Meling

    2013-06-01

    Intramedullary nailing is commonly recommended as the treatment of choice for transverse/reverse oblique trochanteric (AO/OTA type A3=intertrochanteric) and subtrochanteric fractures. However, only to a limited extent is this approach supported by superior results in well designed clinical trials, and the sliding hip screw (SHS) is still a frequently used implant for these fractures. The aim of the present study was to compare IM nails and SHS in the treatment of transverse/reverse oblique trochanteric and subtrochanteric fractures using data from the Norwegian Hip Fracture Register (NHFR). Data on 2716 operations for acute transverse/reverse oblique trochanteric or subtrochanteric fractures were collected from the NHFR from 2005 to 2010. Surgeons reported patient characteristics and details from initial surgery and reoperations, and patients answered questionnaires about pain, satisfaction, and quality of life (EQ-5D) 4, 12, and 36 months postoperatively. Reoperation rates were calculated using Kaplan-Meier analyses. Primary outcome measures were pain (Visual Analogue Scale (VAS)), satisfaction (VAS), quality of life (EQ-5D), and reoperation rates at one year. The treatment groups were similar regarding age, gender, ASA-class, cognitive impairment, and preoperative EQ-5Dindex score. At one year reoperation rates were 6.4% and 3.8% for SHS and IM nails, respectively (p=0.011). Patients treated with SHS also had slightly more pain (VAS 30 vs. 27, p=0.037) and were less satisfied (VAS 31 vs. 36, p=0.003) compared to patients treated with IM nail. There was no statistically significant difference in the EQ-5Dindex score, but the mobility was significantly better for the IM nail group. 12 months postoperatively patients with transverse/reverse oblique trochanteric and subtrochanteric fractures operated with a SHS had a higher reoperation rate compared to those operated with an IM nail. Small differences regarding pain, satisfaction, quality of life, and mobility were

  1. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... NP/PA laws Action center Public and patients SPOT Skin Cancer™ Community programs & events Learn about skin cancer ... mcat1=de12", ]; for (var c = 0; c public SPOT Skin Cancer™ Diseases and treatments Skin, hair, and nail ...

  2. Comparison of different nail bending apparatus

    NARCIS (Netherlands)

    Vianen, H.P.C.A.; Schot, F.; Vermeltfoort, A.Th.

    1992-01-01

    A research to develope a registrated testmethod to define the allowable bending moment of a nail was started in spring of this year. A request for a registrated testmethod is caused by the final project of ir. H.P.C.A. Vianen ‘s study. The consequence of developing new codes in The Netherlands and

  3. Nail Properties and Bone Health: A Review

    Directory of Open Access Journals (Sweden)

    Pouya Saeedi

    2018-04-01

    Full Text Available Physicochemical properties of nail may offer valuable insight into the health of bone. Currently, dual-energy X-ray absorptiometry (DXA is the gold standard technique for evaluating bone health through bone mineral density (BMD. However, only 70% of fractures are explained by low BMD according to DXA. Therefore, the World Health Organisation recommended the need for the development of alternative methods of assessing bone health. Keratin and collagen type I are major proteins in nail and bone, respectively. Both of these proteins undergo post-translational modifications, with a possible correlation between the degree of post-translational modifications in keratin and collagen. Raman spectroscopy is a technique used to detect changes in protein composition and structure. As changes in protein function and structure may be associated with the development of osteoporosis, Raman spectroscopy may be a valuable adjunct to assess bone health and fracture risk. This review critically evaluates various methods and techniques to identify the link between nail properties and bone health. The strengths and limitations of various studies and the potential use of nail protein and minerals to evaluate bone health have been also presented.

  4. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... and rosacea Bumps and growths Color problems Contagious skin diseases Cosmetic treatments Dry / sweaty skin Eczema / dermatitis Hair ... de12", ]; for (var c = 0; c public SPOT Skin Cancer™ Diseases and treatments Skin, hair, and nail care Skin ...

  5. Cerebral damage caused by nail gun injury

    Directory of Open Access Journals (Sweden)

    Andersen Chris Hedeman

    2016-06-01

    Full Text Available Background Accidents with nail guns are rather common, especially in the construction industry. Most injuries involve the extremities and several present with intracerebral injuries. When the patient is unconscious, it can be a big challenge to determine whether the injury is an accident, self-inflicted or a criminal act.

  6. Side Effects: Skin and Nail Changes

    Science.gov (United States)

    Cancer treatments can cause skin to become dry, itchy, red, or peel. Nails may become dark, yellow, or cracked. Learn about signs of skin problems that may need urgent medical care. Get a helpful list of questions to ask your doctor.

  7. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... of hangnails, or other triggers, such as boredom, stress, or anxiety. By figuring out what causes you to bite your nails, you can figure out how to avoid these situations and develop a plan to stop. Just knowing when you’re inclined to bite may help solve the problem. Try to gradually stop biting ...

  8. Mechanical failures after fixation with proximal femoral nail and risk factors

    Directory of Open Access Journals (Sweden)

    Koyuncu S

    2015-12-01

    postoperative complications were seen in 27 patients (17.7%. A total of 14 patients (9.2% underwent a revision procedure for mechanical complications.Conclusion: The study results suggest that the quality of fracture reduction is an important factor that affects the revision rate and SWS score in patients with mechanical complications after osteosynthesis with PFN for trochanteric fractures. Keywords: trochanteric hip fracture, proximal femoral nail, fracture reduction, complications, risk factors, intramedullary nail

  9. National synchrotron light source medical personnel protection interlock

    International Nuclear Information System (INIS)

    Buda, S.; Gmur, N.F.; Larson, R.; Thomlinson, W.

    1998-01-01

    This report is founded on reports written in April 1987 by Robert Hettel for angiography operations at the Stanford Synchrotron Research Laboratory (SSRL) and a subsequent report covering angiography operations at the National Synchrotron Light Source (NSLS); BNL Informal Report 47681, June 1992. The latter report has now been rewritten in order to accurately reflect the design and installation of a new medical safety system at the NSLS X17B2 beamline Synchrotron Medical Research Facility (SMERF). Known originally as the Angiography Personnel Protection Interlock (APPI), this system has been modified to incorporate other medical imaging research programs on the same beamline and thus the name has been changed to the more generic Medical Personnel Protection Interlock (MPPI). This report will deal almost exclusively with the human imaging (angiography, bronchography, mammography) aspects of the safety system, but will briefly explain the modular aspects of the system allowing other medical experiments to be incorporated

  10. The vacuum interlock system for the CELSIUS ring

    International Nuclear Information System (INIS)

    Gajewski, K.

    1990-01-01

    A vacuum interlock system has been designed and built for the CELSIUS storage ring. The ultrahigh-vacuum system of CELSIUS has a design pressure of 10 -11 mbar. This is achieved by using vacuum-fired stainless-steel chambers, baking the whole ring to 300degC and running some 50 sputter ion and titanium sublimation pumps. The turbopumps, combined with roughing pumps, are used during the pump-down and the bake-out. The pressure is monitored by Penning vacuum gauges. There is a number of programmable pressure thresholds set to trigger various events (like closing the sector valves, disabling the bake-out, etc.). The interlock system is based on the Mitsubishi programmable logic controller (PLC). An IBM PC is used as an operator's console. The operation and performance of the system is described. On the basis of present experience an upgrading of the system is suggested. (orig.)

  11. Central system of Interlock of ITER, high integrity architecture

    International Nuclear Information System (INIS)

    Prieto, I.; Martinez, G.; Lopez, C.

    2014-01-01

    The CIS (Central Interlock System), along with the CODAC system and CSS (Central Safety System), form the central I and C systems of ITER. The CIS is responsible for implementing the core functions of protection (Central Interlock Functions) through different systems of plant (Plant Systems) within the overall strategy of investment protection for ITER. IBERDROLA supports engineering to define and develop the control architecture of CIS according to the stringent requirements of integrity, availability and response time. For functions with response times of the order of half a second is selected PLC High availability of industrial range. However, due to the nature of the machine itself, certain functions must be able to act under the millisecond, so it has had to develop a solution based on FPGA (Field Programmable Gate Array) capable of meeting the requirements architecture. In this article CIS architecture is described, as well as the process for the development and validation of the selected platforms. (Author)

  12. From the LHC Reference Database to the Powering Interlock System

    CERN Document Server

    Dehavay, C; Schmidt, R; Veyrunes, E; Zerlauth, M

    2003-01-01

    The protection of the magnet powering system for the Large Hadron Collider (LHC) currently being built at CERN is a major challenge due to the unprecedented complexity of the accelerator. The Powering Interlock System of the LHC will have to manage more than 1600 DC circuits for magnet powering, different in their structure, complexity and importance to the accelerator. For the coherent description of such complex system, a Reference Database as unique source of the parameters of the electrical circuits has been developed. The information, introduced via a generic circuit description language, is first used for installing the accelerator and making all electrical connections. The data is then used for tests and commissioning. During operation, the Powering Interlock System manages all critical functions. It consists of 36 PLC based controllers dis tributed around the machine and requires a flexible and transparent way of configuration, since each controller manages different numbers and types of electrical ci...

  13. NATIONAL SYNCHROTRON LIGHT SOURCE MEDICAL PERSONNEL PROTECTION INTERLOCK

    Energy Technology Data Exchange (ETDEWEB)

    BUDA,S.; GMUR,N.F.; LARSON,R.; THOMLINSON,W.

    1998-11-03

    This report is founded on reports written in April 1987 by Robert Hettel for angiography operations at the Stanford Synchrotron Research Laboratory (SSRL) and a subsequent report covering angiography operations at the National Synchrotron Light Source (NSLS); BNL Informal Report 47681, June 1992. The latter report has now been rewritten in order to accurately reflect the design and installation of a new medical safety system at the NSLS X17B2 beamline Synchrotron Medical Research Facility (SMERF). Known originally as the Angiography Personnel Protection Interlock (APPI), this system has been modified to incorporate other medical imaging research programs on the same beamline and thus the name has been changed to the more generic Medical Personnel Protection Interlock (MPPI). This report will deal almost exclusively with the human imaging (angiography, bronchography, mammography) aspects of the safety system, but will briefly explain the modular aspects of the system allowing other medical experiments to be incorporated.

  14. Metal-organic frameworks with dynamic interlocked components

    Science.gov (United States)

    Vukotic, V. Nicholas; Harris, Kristopher J.; Zhu, Kelong; Schurko, Robert W.; Loeb, Stephen J.

    2012-06-01

    The dynamics of mechanically interlocked molecules such as rotaxanes and catenanes have been studied in solution as examples of rudimentary molecular switches and machines, but in this medium, the molecules are randomly dispersed and their motion incoherent. As a strategy for achieving a higher level of molecular organization, we have constructed a metal-organic framework material using a [2]rotaxane as the organic linker and binuclear Cu(II) units as the nodes. Activation of the as-synthesized material creates a void space inside the rigid framework that allows the soft macrocyclic ring of the [2]rotaxane to rotate rapidly, unimpeded by neighbouring molecular components. Variable-temperature 13C and 2H solid-state NMR experiments are used to characterize the nature and rate of the dynamic processes occurring inside this unique material. These results provide a blueprint for the future creation of solid-state molecular switches and molecular machines based on mechanically interlocked molecules.

  15. Design of responsive materials using topologically interlocked elements

    International Nuclear Information System (INIS)

    Molotnikov, A; Gerbrand, R; Qi, Y; Simon, G P; Estrin, Y

    2015-01-01

    In this work we present a novel approach to designing responsive structures by segmentation of monolithic plates into an assembly of topologically interlocked building blocks. The particular example considered is an assembly of interlocking osteomorphic blocks. The results of this study demonstrate that the constraining force, which is required to hold the blocks together, can be viewed as a design parameter that governs the bending stiffness and the load bearing capacity of the segmented structure. In the case where the constraining forces are provided laterally using an external frame, the maximum load the assembly can sustain and its stiffness increase linearly with the magnitude of the lateral load applied. Furthermore, we show that the segmented plate with integrated shape memory wires employed as tensioning cables can act as a smart structure that changes its flexural stiffness and load bearing capacity in response to external stimuli, such as heat generated by the switching on and off an electric current. (paper)

  16. COMPARATIVE STUDY BETWEEN TITANIUM ELASTIC NAILING (TENS AND DYNAMIC COMPRESSION PLATING (DCP IN THE TREATMENT OF FEMORAL DIAPHYSEAL FRACTURES IN CHILDREN

    Directory of Open Access Journals (Sweden)

    Ramasubba Reddy

    2015-08-01

    Full Text Available BACKGROUND : Orthopaedic surgeons have long maintained that all children who have sustained a diaphyseal fracture of femur recover with c onservative treatment, given the excellent remodeling ability of immature bone in children. Angulations, shortenings and malrotations are not always corrected by conservative treatment. Of many surgical options, titanium elastic nailing has been the newer implant which is being used regularly. Although good results have been reported with elastic intramedullary nails, plate fixation continues to be a viable alternative in surgical treatment of femoral shaft fractures. However there are not many studies comp aring the efficiency of titanium elastic nailing and plating for femoral diaphyseal fractures in pediatric age group. AIM : The present study aims to compare the surgical management of diaphyseal fractures of femur in children with Dynamic Compression Plati ng versus Titanium Elastic Nailing. DESIGN : This is a prospective study . MATERIALS AND METHODS : This prospective study was conducted in a tertiary hospital. Patients who presented to the out - patient department and casualty of the hospital with femoral diap hyseal fractures during April 2012 to June 2014 were considered for the study. Subjects fulfilling the predetermined inclusion and exclusion criteria were included in the study. STATISTICAL METHODS : Fisher Exact test, Chi - Square Test, Student t test (Two t ailed, independent . RESULTS : Patients in the age group of 6 - 14 years were considered for the study, Patients were divided into two groups and treated with DCP/TENS. The duration of surgery, hospital stay, and, amount of blood loss was minimal in TENS grou p. Callus was seen early in TENS group. Radiological union was early in TENS group by 2 - 3 weeks. Outcome was better in patients treated with TENS (Excellent - 70%; Satisfactory – 30%; Poor - 0% in comparison to DCP (Excellent - 70%; Satisfactory - 25%; Poor - 5%. CO NCLUSION : TENS

  17. Availability Analysis of the Ventilation Stack CAM Interlock System

    CERN Document Server

    Young, J

    2000-01-01

    Ventilation Stack Continuous Air Monitor (CAM) Interlock System failure modes, failure frequencies, and system availability have been evaluated for the RPP. The evaluation concludes that CAM availability is as high as assumed in the safety analysis and that the current routine system surveillance is adequate to maintain this availability credited in the safety analysis, nor is such an arrangement predicted to significantly improve system availability.

  18. Access control and interlock system at the Advanced Photon Source

    International Nuclear Information System (INIS)

    Forrestal, J.; Hogrefe, R.; Knott, M.; McDowell, W.; Reigle, D.; Solita, L.; Koldenhoven, R.; Haid, D.

    1997-01-01

    The Advanced Photon Source (APS) consists of a linac, position accumulator ring (PAR), booster synchrotron, storage ring, and up to 70 experimental beamlines. The Access Control and Interlock System (ACIS) utilizes redundant programmable logic controllers (PLCs) and a third hard-wired chain to protect personnel from prompt radiation generated by the linac, PAR, synchrotron, and storage ring. This paper describes the ACIS's design philosophy, configuration, hardware, functionality, validation requirements, and operational experience

  19. External jig in the placement of distal interlocking screws | Ikem ...

    African Journals Online (AJOL)

    Retrograde (52.2%) was the commonest surgical approach used for femur. The main indication for SIGN interlocking surgery was recent fracture 77.8%. Open reduction 97.8% was the commonest method of reduction used. The mean±SD bone union time was 3.58±0.56 months and range 3-5 months. Distal screw insertion ...

  20. Automatic Verification of Railway Interlocking Systems: A Case Study

    DEFF Research Database (Denmark)

    Petersen, Jakob Lyng

    1998-01-01

    This paper presents experiences in applying formal verification to a large industrial piece of software. The are of application is railway interlocking systems. We try to prove requirements of the program controlling the Swedish railway Station Alingsås by using the decision procedure which...... express thoughts on what is needed in order to be able to successfully verify large real-life systems....

  1. Modular safety interlock system for high energy physics experiments

    International Nuclear Information System (INIS)

    Kieffer, J.; Golceff, B.V.

    1980-10-01

    A frequent problem in electronics systems for high energy physics experiments is to provide protection for personnel and equipment. Interlock systems are typically designed as an afterthought and as a result, the working environment around complex experiments with many independent high voltages or hazardous gas subsystems, and many different kinds of people involved, can be particularly dangerous. A set of modular hardware has been designed which makes possible a standardized, intergrated, hierarchical system's approach and which can be easily tailored to custom requirements

  2. Effects of Interlocking and Supporting Conditions on Concrete Block Pavements

    Science.gov (United States)

    Mahapatra, Geetimukta; Kalita, Kuldeep

    2018-02-01

    Concrete Block Paving (CBP) is widely used as wearing course in flexible pavements, preferably under light and medium vehicular loadings. Construction of CBP at site is quick and easy in quality control. Usually, flexible pavement design philosophy is followed in CBP construction, though it is structurally different in terms of small block elements with high strength concrete and their interlocking aspects, frequent joints and discontinuity, restrained edge etc. Analytical solution for such group action of concrete blocks under loading in a three dimensional multilayer structure is complex and thus, the need of conducting experimental studies is necessitated for extensive understanding of the load—deformation characteristics and behavior of concrete blocks in pavement. The present paper focuses on the experimental studies for load transfer characteristics of CBP under different interlocking and supporting conditions. It is observed that both interlocking and supporting conditions affect significantly on the load transfer behavior in CBP structures. Coro-lock block exhibits better performance in terms of load carrying capacity and distortion behavior under static loads. Plate load tests are performed over subgrade, granular sub-base (GSB), CBP with and without GSB using different block shapes. For an example case, the comparison of CBP with conventional flexible pavement section is also presented and it is found that CBP provides considerable benefit in terms of construction cost of the road structure.

  3. Determinants of Board Interlocking in the Brazilian Capital Market

    Directory of Open Access Journals (Sweden)

    Flávio Ribeiro

    2016-10-01

    Full Text Available The objective in this article was to identify the main determinants of Board Interlocking in the Brazilian capital market. As the theoretical structure, the Agency theory and Corporate Governance, the Resource Dependence theory and the Board of Administrators and the Characteristics of Board Interlocking. The sample consists of 58 Brazilian companies that participate in the Bovespa Index (Ibovespa. An empirical analytic study was undertaken. With regard to the objectives, it is characterized as exploratory and, with regard to the procedures, a documentary research was undertaken. The data on the Boards of Administrators were collected from the Reference Forms available on the website of the São Paulo Stock Exchange (BM&FBOVESPA. The results found demonstrate the generalized presence of Board Interlocking in these companies, normally associated with four factors: (1 economic group formation; (2 governmental control; (3 formation of pension funds; and (4 presence of professionals with acknowledged market experience. The results also suggest that the first three factors give rise to long-lasting links and that these connections are hard to break. On the other hand, the links established through professionals with market experience tend to be more unstable because the presence of these professionals is highly demanded to serve on the board of different companies.

  4. Sarcoidosis: radiographic manifestations in the nails and distal phalanges

    Energy Technology Data Exchange (ETDEWEB)

    Albers, Brittany K.; Garner, Hillary W. [Mayo Clinic, Department of Radiology, Jacksonville, FL (United States); Sluzevich, Jason C. [Mayo Clinic, Department of Dermatology, Jacksonville, FL (United States)

    2016-05-15

    Sarcoidosis is a granulomatous disease which can affect multiple organ systems. Clinical and radiologic manifestations depend on the organ system involved and the chronicity of disease. Nail involvement in sarcoidosis is rare, but is clinically relevant as it indicates chronic systemic disease. Nail abnormalities can be identified radiographically, and when seen in patients with known or suspected sarcoidosis, should prompt careful evaluation of the underlying bone for osseous involvement. We describe a case of sarcoidosis with radiographic findings in the nails and distal phalangeal tufts, which were indicative of nail and osseous sarcoid involvement and strongly supported the presence of chronic systemic disease. Although the nail findings resolved clinically and on radiographs after treatment, the osseous findings showed only minimal improvement. To our knowledge, the radiographic findings of nail sarcoidosis have not been previously addressed in the literature. (orig.)

  5. Sarcoidosis: radiographic manifestations in the nails and distal phalanges

    International Nuclear Information System (INIS)

    Albers, Brittany K.; Garner, Hillary W.; Sluzevich, Jason C.

    2016-01-01

    Sarcoidosis is a granulomatous disease which can affect multiple organ systems. Clinical and radiologic manifestations depend on the organ system involved and the chronicity of disease. Nail involvement in sarcoidosis is rare, but is clinically relevant as it indicates chronic systemic disease. Nail abnormalities can be identified radiographically, and when seen in patients with known or suspected sarcoidosis, should prompt careful evaluation of the underlying bone for osseous involvement. We describe a case of sarcoidosis with radiographic findings in the nails and distal phalangeal tufts, which were indicative of nail and osseous sarcoid involvement and strongly supported the presence of chronic systemic disease. Although the nail findings resolved clinically and on radiographs after treatment, the osseous findings showed only minimal improvement. To our knowledge, the radiographic findings of nail sarcoidosis have not been previously addressed in the literature. (orig.)

  6. Mismatch analysis of humeral nailing. Antegrade versus retrograde insertion

    International Nuclear Information System (INIS)

    Mahaisavariya, B.; Jiamwatthanachai, P.; Aroonjarattham, P.; Aroonjarattham, K.; Wongcumchang, M.; Sitthiseripratip, K.

    2011-01-01

    Closed humeral nailing is now considered an alternative treatment for humeral-shaft fracture. The nail can be inserted with either the antegrade or retrograde method. We investigated and compared the problem of geometric mismatch of the humeral nail to the humerus between the two methods of insertion. The study was performed using virtual simulation based on computed tomography (CT) data of 76 Thai cadaveric humeri and the commonly used Russell-Taylor humeral nail 8 mm in diameter and 220 mm long. Mismatch of the nail to the intact humerus was analyzed and compared between the antegrade and retrograde nailing approaches. The results showed: the diameter of the medullary canal averaged 7.9-13.8 mm; the minimal reaming diameter to accommodate virtual nail insertion averaged 8.8-14.8 mm for the antegrade and 8.8-29.3 mm for the retrograde approach; the minimal reaming thickness of the inner cortex averaged 0.1-1.5 mm for the antegrade and 0.1-9.9 mm for the retrograde approach; the percentages of cortical bone removed prior to nail insertion were 3.8-107.1% and 3.8-1,287.6% for the antegrade and retrograde approaches, respectively; the eccentricity of the nail-medullary canal center were 0.4-3.4 and 0.4-10.6 mm for the antegrade and retrograde approaches, respectively. Less mismatching occurred with antegrade nailing than with the retrograde approach. Retrograde nailing requires excessive reaming at the distal part of the humerus to accommodate nail insertion. This may create bone weakness and the risk of supracondylar fracture. (author)

  7. Correlation of trace metals in hair and nails

    International Nuclear Information System (INIS)

    Benischek-Huber, I.; Benischek, F.

    1985-01-01

    Correlation of Cd, Cu, Hg, Pb and Zn was studied in 350 hair and nail samples of 12 persons. Determination was performed by atomic absorption spectrometry. Cd, Pb and Hg concentrations are fluctuating significantly in the specimens. Correlation was found for these elements in hair and finger nails and for Pb in hair and toe nails. Zn and Cu are more stable, the ratios of contents in corresponding samples are within a small range. (author)

  8. Nail changes in alopecia areata: Incidence and pattern

    Directory of Open Access Journals (Sweden)

    Gandhi V

    2003-03-01

    Full Text Available One hundred consecutive patients with alopecia areata were examined for presence of nail abnormalities. Nail changes were seen in 44/100 (44% of patients with most frequent occurrence in multifocal variety (30/44=68%. The commonest abnormality observed was superficial pits seen in 28(64% patients. Presence and severity of nail changes may indicate a more severe and recalcitrant disease.

  9. Strength of titanium intramedullary implant versus miniplate fixation of mandibular condyle fractures.

    Science.gov (United States)

    Frake, Paul C; Howell, Rebecca J; Joshi, Arjun S

    2012-07-01

    To test the strength of internal fixation of mandibular condyle fractures repaired with titanium miniplates versus titanium intramedullary implants. Prospective laboratory experimentation in urethane mandible models and human cadaveric mandibles. Materials testing laboratory at an academic medical center. Osteotomies of the mandibular condyle were created in 40 urethane hemimandible models and 24 human cadaveric specimens. Half of the samples in each group were repaired with traditional miniplates, and the other half were repaired with intramedullary titanium implants. Anteroposterior and mediolateral loads were applied to the samples, and the displacement was measured with reference to the applied force. Titanium intramedullary implants demonstrated statistically significant improved strength and stiffness versus miniplates in the urethane model experimental groups. Despite frequent plastic deformation and mechanical failures of the miniplates, a 1.6-mm-diameter titanium intramedullary pin did not mechanically fail in any of the cases. Intramedullary implantation failures were due to secondary fracture of the adjacent cortical bone or experimental design limitations including rotation of the smooth pin implant. Mechanical implant failures that were encountered with miniplate fixation were not seen with titanium intramedullary implants. These intramedullary implants provide stronger and more rigid fixation of mandibular condyle fractures than miniplates in this in vitro model.

  10. Intramedullary spinal cord metastasis from colonic carcinoma presenting as Brown-Sequard syndrome: a case report

    LENUS (Irish Health Repository)

    Kaballo, Mohammed A

    2011-08-02

    Abstract Introduction Intramedullary spinal cord metastasis is very rare. The majority are discovered incidentally during autopsy. Most symptomatic patients present with rapidly progressive neurological deficits and require immediate examination. Few patients demonstrate features of Brown-Séquard syndrome. Radiotherapy is the gold-standard of therapy for Intramedullary spinal cord metastasis. The overall prognosis is poor and the mortality rate is very high. We present what is, to the best of our knowledge, the first case of Intramedullary spinal cord metastasis of colorectal carcinoma presenting as Brown-Séquard syndrome. Case presentation We present the case of a 71-year-old Caucasian man with colonic adenocarcinoma who developed Intramedullary spinal cord metastasis and showed features of Brown-Séquard syndrome, which is an uncommon presentation of Intramedullary spinal cord metastasis. Conclusion This patient had an Intramedullary spinal cord metastasis, a rare form of metastatic disease, secondary to colonic carcinoma. The metastasis manifested clinically as Brown-Séquard syndrome, itself a very uncommon condition. This syndrome is rarely caused by intramedullary tumors. This unique case has particular interest in medicine, especially for the specialties of medical, surgical and radiation oncology. We hope that it will add more information to the literature about these entities.

  11. Image Analysis for Nail-fold Capillaroscopy

    OpenAIRE

    Vucic, Vladimir

    2015-01-01

    Detection of diseases in an early stage is very important since it can make the treatment of patients easier, safer and more ecient. For the detection of rheumatic diseases, and even prediction of tendencies towards such diseases, capillaroscopy is becoming an increasingly recognized method. Nail-fold capillaroscopy is a non-invasive imaging technique that is used for analysis of microcirculation abnormalities that may lead todisease like systematic sclerosis, Reynauds phenomenon and others. ...

  12. Vertical interlocks of executives and performance of affiliated firms in state owned Chinese business groups

    DEFF Research Database (Denmark)

    Arnoldi, Jakob; Chen, Xin; Na, Chaohong

    . Further, the positive effects of vertically interlocking chairmen decrease as the number of pyramidal layers increases or regional marketization index improves. Such positive effects of interlocks, however, become greater as the divergence between cash flow rights and control rights of business groups...... increases. Our findings are consistent with the hypotheses that vertically interlocking executives can increase firm value by providing better protection against political interference and expropriation by the ultimate controllers of business groups. Our study sheds new light in the role and function...... of interlocks and adds to a small body of literature on the dynamics of state owned business groups in emerging markets generally and China particularly....

  13. National Synchrotron Light Source angiography personnel protection interlock

    International Nuclear Information System (INIS)

    Gmuer, N.; Larson, R.; Thomlinson, W.

    1992-06-01

    This document has been written to describe the safety system operation at the NSLS X17B2 beamline Synchrotron Medical Research Facility (SMERF). The angiography exposure process involves scanning a patient up and down through dual fixed-position x-ray beams; exposure is controlled by opening and closing a fast-acting Safety Shutter mechanism at precise times in relation to the up and down motion of the scan chair. The fast-acting Safety Shutter mechanism is the primary radiation-stopping element protecting the patient while the chair is at rest and while it is reversing directions during the scan. Its fail-safe and fast operation is essential for the safety of the patient. Operation of X17B2 as a human subject angiography station necessitates the implementation of a personnel protection interlock system that, in conjunction with the Safety Shutters: permits safe access to the patient exposure area while the synchrotron radiation beam is illuminating the upstream dual energy monochromator; allows a patient to be imaged by the monochromatized beam under the supervision of a Responsible Physician, with scan chair motion and precision shutter actuation regulated by an angiography control computer, while providing a suitable number of safeguards against accidental radiation exposure; has different modes of operation to accommodate equipment set-up, test, and calibration; and patient exposure; and ensures the quick extinction of the beam if a potentially unsafe condition is detected. The interlock system which performs these safety functions is called the Angiography Personnel Protection Interlock (APPI). The APPI Document is organized such that the level of detail changes from a general overview to detailed engineering drawings of the hardware system

  14. National Synchrotron Light Source angiography personnel protection interlock

    Energy Technology Data Exchange (ETDEWEB)

    Gmuer, N.; Larson, R.; Thomlinson, W.

    1992-06-01

    This document has been written to describe the safety system operation at the NSLS X17B2 beamline Synchrotron Medical Research Facility (SMERF). The angiography exposure process involves scanning a patient up and down through dual fixed-position x-ray beams; exposure is controlled by opening and closing a fast-acting Safety Shutter mechanism at precise times in relation to the up and down motion of the scan chair. The fast-acting Safety Shutter mechanism is the primary radiation-stopping element protecting the patient while the chair is at rest and while it is reversing directions during the scan. Its fail-safe and fast operation is essential for the safety of the patient. Operation of X17B2 as a human subject angiography station necessitates the implementation of a personnel protection interlock system that, in conjunction with the Safety Shutters: permits safe access to the patient exposure area while the synchrotron radiation beam is illuminating the upstream dual energy monochromator; allows a patient to be imaged by the monochromatized beam under the supervision of a Responsible Physician, with scan chair motion and precision shutter actuation regulated by an angiography control computer, while providing a suitable number of safeguards against accidental radiation exposure; has different modes of operation to accommodate equipment set-up, test, and calibration; and patient exposure; and ensures the quick extinction of the beam if a potentially unsafe condition is detected. The interlock system which performs these safety functions is called the Angiography Personnel Protection Interlock (APPI). The APPI Document is organized such that the level of detail changes from a general overview to detailed engineering drawings of the hardware system.

  15. National Synchrotron Light Source medical personnel protection interlock

    Energy Technology Data Exchange (ETDEWEB)

    Buda, S.; Gmuer, N.F.; Larson, R.; Thomlinson, W.

    1998-11-01

    This report is founded on reports written in April 1987 by Robert Hettel for angiography operations at the Stanford Synchrotron Research Laboratory (SSRL) and a subsequent report covering angiography operations at the National Synchrotron Light Source (NSLS); BNL Informal Report 47681, June 1992. The latter report has now been rewritten in order to accurately reflect the design and installation of a new medical safety system at the NSLS X17B2 beamline Synchrotron Medical Research Facility (SMERF). Known originally as the Angiography Personnel Protection Interlock (APPI), this system has been modified to incorporate other medical imaging research programs on the same beamline and thus the name has been changed to the more generic Medical Personnel Protection Interlock (MPPI). This report will deal almost exclusively with the human imaging (angiography, bronchography, mammography) aspects of the safety system, but will briefly explain the modular aspects of the system allowing other medical experiments to be incorporated. This MPPI report is organized such that the level of detail changes from a general overview to detailed engineering drawings of the hardware system. The general overview is presented in Section 1.0, MPPI Operational Mode and Procedures. The various MPPI components are described in detail in Section 2.0. Section 3.0 presents some simplified logic diagrams and accompanying text. This section was written to allow readers to become familiar with the logic system without having to work through the entire set of detailed engineering drawings listed in the Appendix. Detailed logic specifications are given in Section 4.0. The Appendix also contains copies of the current MPPI interlock test procedures for Setup and Patient Modes.

  16. Bunker door interlock limit issues of K-130 cyclotron, VECC

    International Nuclear Information System (INIS)

    Srihari, K.; Ravishankar, R.; Mitra, M.S.; Mishra, S.K.; Bandyopadhyay, T.; Sarkar, P.K.

    2011-01-01

    The K-130 cyclotron is in operation at VECC, Kolkata. Recently modernization of the cyclotron has taken place. Central region modification has increased reasonable internal beam current. During the tuning of the projectiles, loss of beam is unavoidable and projectiles hitting different parts of the machine inside the vacuum chamber . These interactions produce prompt radiation comprising neutron and gamma. However machine bunker is not accessible during the operation of the machine. The induced activity produced because of interactions of the primary and secondary radiation a radiation hazardous environment during the shut down for the related maintenance work. Area radiation monitors placed at machine bunker room have the interlock with massive shield door of the bunker. Area radiation monitors are set to specified limiting value, lower than that will allow to open the shield door in normal condition. As, the internal beam current being increased and the probability of beam spread being more. Consequently generation of induced activity is also high leading to delay in machine bunker door opening because of the interlock settings. Radiation dose mapping after a long operation of the machine was done for the different strategic points (The locations mainly people access immediate after shut down). Different consequences and remedial measures being presented in paper to raise the dose rate limit level for the interlocks between the area radiation monitors with machine bunker door, keeping in mind of the regulatory requirements. Raising the limit of dose rate limiting value will minimize the waiting time to access the machine bunker which will increase the duty factor of the machine. (author)

  17. Photovoltaic module and interlocked stack of photovoltaic modules

    Science.gov (United States)

    Wares, Brian S.

    2014-09-02

    One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame. A plurality of individual male alignment features and a plurality of individual female alignment features are included on each frame. Adjacent photovoltaic modules are interlocked by multiple individual male alignment features on a first module of the adjacent photovoltaic modules fitting into and being surrounded by corresponding individual female alignment features on a second module of the adjacent photovoltaic modules. Other embodiments, features and aspects are also disclosed.

  18. Photovoltaic module and interlocked stack of photovoltaic modules

    Science.gov (United States)

    Wares, Brian S.

    2012-09-04

    One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame having at least a top member and a bottom member. A plurality of alignment features are included on the top member of each frame, and a plurality of alignment features are included on the bottom member of each frame. Adjacent photovoltaic modules are interlocked by the alignment features on the top member of a lower module fitting together with the alignment features on the bottom member of an upper module. Other embodiments, features and aspects are also disclosed.

  19. Shutdown channels and fitted interlocks in atomic reactors

    International Nuclear Information System (INIS)

    Furet, J.; Landauer, C.

    1968-01-01

    This catalogue consists of tables (one per reactor) giving the following information: number and type of detectors, range of the shutdown channels, nature of the associated electronics, thresholds setting off the alarms, fitted interlocks. These cards have been drawn up with a view to an examination of the reactors safety by the 'Reactor Safety Sub-Commission', they take into account the latest decisions. The reactors involved in this review are: Azur, Cabri, Castor-Pollux, Cesar-Marius-2, Edf-2, EL3, EL4, Eole, G1, G2-G3, Harmonie, Isis, Masurca, Melusine, Minerve, Osiris, Pegase, Peggy, PAT, Rapsodie, SENA, Siloe, Siloette, Triton-Nereide, and Ulysse. (authors) [fr

  20. Controls and interlocks for a prototype 1MHz beam chopper

    International Nuclear Information System (INIS)

    Waters, G.; Bishop, D.; Barnes, M.J.; Wait, G.D.

    1991-05-01

    A prototype 1 MHz beam chopper for the proposed KAON Factory at TRIUMF has been constructed. The chopper is an electric field device, driven by a tetrode based pulser, for deflecting a charged particle beam. Associated with the tetrode used in the prototype design are high voltage power supplies for the electrodes. We use an FET based grid pulser and a sequencer capable of accurate digital control of pulse timing to 0.4 ns. A safety interlock and control system using a programmable controller with fibre optic links has been built. This has given us the versatility required in a prototype system. (Author) 4 refs., 5 figs

  1. Nail bed expansion: A new technique for correction of multiple isolated congenital micronychia

    Directory of Open Access Journals (Sweden)

    Gholamhossein Ghaffarpour

    2014-01-01

    Full Text Available Congenital micronychia may involve big toes or may involve other nails. The etiology of micronychia is not clear but amniotic bands, teratogens (drugs, alcohol, Nail Patella Syndrome etc. A 44-year-old woman with multiple isolated congenital micronychia over her hands and feet was selected. The major affected nails were thumbs and Index fingers. Surgical method were done step by step: Anesthesia of the area, extraction of short nail, elevation of nail bed, longitudinal nail bed incisions, suturing the lateral nail bed to the nail wall, covering the nail bed by a splint of plastic suction tube, bandage with gauze Vaseline. Finally, we hypnotized that in congenital micronychia, the main pathology is in nail bed; through this theory by nail bed expansion better outcomes are coming.

  2. Articular cartilage damage with intramedullary lesion (bone bruise) in anterior cruciate ligament rupture

    International Nuclear Information System (INIS)

    Ide, Shuya; Ohdera, Toshihiro; Tokunaga, Masami; Hiroshima, Shiro; Yoshimoto, Eiji

    2002-01-01

    We evaluated the relationship between the intramedullary lesion on MRI and cartilage damage in patients associated with acute anterior cruciate ligament (ACL) rupture. Thirty-two cases documented by MRI and arthroscopy within one month from injury underwent ACL reconstruction using ST-G, and arthroscopy was performed again after surgery. The mean term between reconstruction and postoperative arthroscopy was twelve months. The cartilage damage on arthroscopy was compared with the intramedullary lesion on MRI. Cartilage damage was observed in 9 cases (28.1%) during the initial arthroscopy and in 16 cases (50.0%) during the second arthroscopy. Intramedullary lesion was detected in all 32 cases (total: 73 lesions) on MRI. Intramedullary lesion leading to cartilage damage was common in the geographic-type lateral femoral condyle. There was significant difference between the lateral meniscus tear and the cartilage damage of the lateral compartment. (author)

  3. Clinical study of intramedullary route as an alternative for fluid administration in young dogs

    Directory of Open Access Journals (Sweden)

    Pedro Luiz de Camargo

    1996-12-01

    accomplished and rapidly performed. Our results show that intramedullary route is safe and may be of great value as an alternative on the treatment of young dogs with critical hemodynamic alterations when the intravenous route is not accessible.

  4. The Hammer-and-Nail Phenomenon in Mathematics Education

    Science.gov (United States)

    Lim, Kien H.

    2012-01-01

    This paper uses the hammer-and-nail metaphor to highlight the rigidity and impulsiveness that can be found in student mathematical behaviour. The hammer-and-nail phenomenon can be attributed to two plausible causes: (1) the way the human mind works; and (2) the way mathematics is traditionally taught in school. In this paper, the following aspects…

  5. Reference values for the nickel concentration in human finger nails

    DEFF Research Database (Denmark)

    Gammelgaard, Bente; Peters, K; Menné, T

    1991-01-01

    A reference value for the nickel concentration in finger nails from people who are not occupationally exposed to nickel was determined on the basis of nail samples from 95 healthy individuals. The mean +/- standard deviation was 1.19 +/- 1.61 mg/kg and the median was 0.49 mg/kg (range 0.042-7.50 mg...

  6. NAIL KERATIN AS MONITOR-TISSUE FOR SELENIUM EXPOSURE

    NARCIS (Netherlands)

    VANNOORD, PAH; MAAS, MJ; DEBRUIN, M

    1992-01-01

    Nail clippings might provide a way to monitor exposure to selenium in the recent past of an individual, since a clipping collected from a toe would reflect exposures months before actual clipping date. The relation between levels of exogenous selenium exposure and selenium levels in nail keratin was

  7. Nail psoriasis masqueraded by secondary infection with Rhodotorula mucilaginosa.

    Science.gov (United States)

    Martini, K; Müller, H; Huemer, H P; Höpfl, R

    2013-11-01

    A 38-year-old man presented with whitish nail changes on all fingers as the sole symptom. The condition had developed within a few days and led to dystrophy of the proximal part of the nail plates. As microscopic examination of nail scrapings demonstrated budding hyphae and the patient working as a teacher reported frequent use of a wet sponge, antifungal therapy was initiated. Subsequent cultures and molecular typing identified Rhodotorula mucilaginosa (formerly R. rubra). This environmental yeast was repeatedly isolated despite of therapy with itraconazole. As no improvement was achieved and testing of the biological activity of the fungus revealed only marginal keratolytic activity, it was considered as a coloniser of a destructed nail matrix. Finally, a biopsy of the nail bed confirmed the diagnosis of nail psoriasis, which rapidly responded to treatment with acitretin and topical calcipotriol/betamethasone cream. Fungal growth in destructed nails masqueraded the underlying disease and may have triggered the psoriatic nail reaction. © 2013 Blackwell Verlag GmbH.

  8. Use of flexible facing for soil nail walls.

    Science.gov (United States)

    2011-11-01

    Soil nail walls are a widely used technology for retaining vertical and nearly vertical cuts in soil. A : significant portion of the cost of soil nail wall construction is related to the construction of a reinforced : concrete face. The potential for...

  9. Study of treatment of short oblique and transverse fractures near isthmus of femur

    Directory of Open Access Journals (Sweden)

    Soumya Ghosh

    2014-01-01

    Full Text Available Background: Currently, the standard treatment for femoral shaft fractures in adults is intramedullary nailing. Objectives: Comparative assessment of results with open Kuntscher′s nailing (K-nailing and closed interlocking intramedullary nail in case of fracture shaft femur. Materials and Methods: This pilot project was conducted in a tertiary care hospital of a developing country on 40 patients in a time period of 1 year. A total of 20 patients were treated with intramedullary nailing in the tertiary care hospital while twenty received open fixation with K-nailing in a rural center. Results: There was no significant difference with regard to union rate, implant failure, infection, and fracture alignment between both groups. Conclusion: Open fixation with unlocked femoral nailing is technically less demanding and requires less operating time; additionally, there is no exposure to radiation and cost of the implant is cheaper. So, open K-nailing is still remains an option for the management of noncomminuted isthmus fractures of the femur in a developing country.

  10. Influence of interlocked transactions on gum arabic production and marketing in Senegal

    NARCIS (Netherlands)

    Mujawamariya, G.; Haese, D' M.F.C.; Burger, C.P.J.

    2010-01-01

    Interlocked relationships are characterised by traders’ supply of inputs and cash to producers on credit, to be reimbursed at sale time based on a pre-defined price which is often lower than the prevailing market price. The study analyses determinants of choice of interlocking in the gum sector in

  11. Interlocking Boards and Firm Performance: Evidence from a New Panel Database

    NARCIS (Netherlands)

    M.C. Non (Marielle); Ph.H.B.F. Franses (Philip Hans)

    2007-01-01

    textabstractAn interlock between two firms occurs if the firms share one or more directors in their boards of directors. We explore the effect of interlocks on firm performance for 101 large Dutch firms using a large and new panel database. We use five different performance measures, and for each

  12. Formal Development of a Tool for Automated Modelling and Verification of Relay Interlocking Systems

    DEFF Research Database (Denmark)

    Haxthausen, Anne Elisabeth; Kjær, Andreas A.; Le Bliguet, Marie

    2011-01-01

    This paper describes a tool for formal modelling relay interlocking systems and explains how it has been stepwise, formally developed using the RAISE method. The developed tool takes the circuit diagrams of a relay interlocking system as input and gives as result a state transition system modelling...

  13. 30 CFR 75.819 - Motor-starter enclosures; barriers and interlocks.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Motor-starter enclosures; barriers and...-Voltage Distribution High-Voltage Longwalls § 75.819 Motor-starter enclosures; barriers and interlocks. Compartment separation and cover interlock switches for motor-starter enclosures must be maintained in...

  14. Extramedullary versus intramedullary tibial cutting guides in megaprosthetic total knee replacement

    Directory of Open Access Journals (Sweden)

    Karade Vikas

    2012-10-01

    Full Text Available Abstract Background In a standard total knee replacement, tibial component alignment is a key factor for the long term success of the surgery. The purpose of this study is to compare the accuracy of extramedullary and intramedullary tibial cutting guides used in indigenous and imported implants respectively, in positioning of the tibial components in megaprosthetic knee replacements. Methods A comparative study of the accuracy of extramedullary and intramedullary tibial cutting guides was carried out in 92 megaprosthetic knee replacements for distal femoral tumors. For the proximal tibia cut for tibial component placement, an extramedullary guide was used in 65 patients and an intramedullary guide was used in 27 patients. Tibial component alignment angles were measured in postoperative X-rays with the help of CAD software. Results There was more varus placement in coronal plane with extramedullary cutting guide (−1.18 +/− 2.4 degrees than the intramedullary guide (−0.34 +/− 2.31 degrees but this did not reach statistical significance. The goal of 90 +/− 2 degrees alignment of tibial component was achieved in 54% of patients in the extramedullary group versus 67% in the intramedullary group. In terms of sagittal plane alignment, extramedullary guide showed less accurate results (2.09 +/− 2.4 degrees than intramedullary guide (0.50 +/− 3.80 degrees for tibial component alignment, though 78% of patients were aligned within the goal of 0–5 degrees of tibial slope angle in extramedullary group versus 63% in intramedullary group. The mean error in the measurements due to rotation of the knee during taking the X-rays was less than 0.1 degrees and distribution of the X-rays with the rotation of knee was similar in both the groups. Conclusions Overall, in megaprosthetic knee replacement intramedullary guides gave more accurate results in sagittal plane and exhibited similar variability as of extramedullary guides in coronal plane.

  15. Intramedullary capillary hemangioma of the thoracic spine: case report and review of the literature

    Directory of Open Access Journals (Sweden)

    Paul Santiago

    2009-07-01

    Full Text Available Capillary hemangiomas are benign vascular neoplasms. When associated with the spine, these growths frequently involve the vertebral body, but rarely have they been reported to occur as intradural lesions, while even more rarely occurring in a true intramedullary location. We report a rare case of an intrame-dullary capillary hemangioma of the thoracic spinal cord and a review of the literature.

  16. Nail lesions as a main manifestation of lichen nitidus

    Directory of Open Access Journals (Sweden)

    Michał Sobjanek

    2015-09-01

    Full Text Available Introduction . Lichen nitidus (LN is a rare, chronic, inflammatory dermatosis usually affecting children and young adults. Nails involvement is very rare. Until now, 7 cases of LN with nail involvement have been described. Objective. To present a rare case of childhood lichen nitidus where trachyonychia was the main manifestation of the disease. Case report. A 7-year-old, Caucasian, previously healthy boy presented thumbnail longitudinal ridges, distal splitting and subungual hyperkeratosis for 7 months. Numerous mycological and bacteriological examinations were negative. Dermatological examination also revealed erythematous lesions on the proximal nail fold as well as small skin-pigmented papules on the thumb. Similar papules grouped into patches were also observed on the upper limbs, trunk and forehead. Treatment was not recommended. Conclusions . Lichen nitidus may rarely affect nails and should be considered as a possible cause of nail lesions in childhood.

  17. Drug delivery into microneedle-porated nails from nanoparticle reservoirs.

    Science.gov (United States)

    Chiu, Wing Sin; Belsey, Natalie A; Garrett, Natalie L; Moger, Julian; Price, Gareth J; Delgado-Charro, M Begoña; Guy, Richard H

    2015-12-28

    This study demonstrates the potential of polymeric nanoparticles as drug reservoirs for sustained topical drug delivery into microneedle-treated human nail. Laser scanning confocal microscopy was used to image the delivery of a fluorescent model compound from nanoparticles into the nail. A label-free imaging technique, stimulated Raman scattering microscopy, was applied, in conjunction with two-photon fluorescence imaging, to probe the disposition of nanoparticles and an associated lipophilic 'active' in a microneedle-porated nail. The results provide clear evidence that the nanoparticles function as immobile reservoirs, sequestered on the nail surface and in the microneedle-generated pores, from which the active payload can be released and diffuse laterally into the nail over an extended period of time. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. ROLES OF INTERLOCKING DIRECTORATES IN AN EMERGING COUNTRY: CONTROL AND COORDINATION IN FAMILY BUSINESS GROUPS

    Directory of Open Access Journals (Sweden)

    Aylin Ataay

    2016-04-01

    Full Text Available Maman (1999 proposed that, in countries in which business groups are dominant forms for organizing economic activities, the interlocking directorate is a managerial tool that can be prioritized to control and coordinate activities of their affiliated firms within the same groups and align their business objectives. This organizational connection appears to be an intentional strategy on the part of the groups‟ headquarters. In order to study the interlocking ties in Turkish family business groups (FBG, this study focused on interlocking directorates among listed firms in Turkey. The findings of preliminary study reveal that almost all of the interlocking ties were within the business groups (BG in our sample. This is the result of assignment of familyaffiliated and/or professional inside directors to the various boards of companies in the BG. We also found that compare to vertical ties; business groups are using more horizontal interlocking connections to bond their affiliated companies together.

  19. Fe distribution and speciation in human nails

    Energy Technology Data Exchange (ETDEWEB)

    Katsikini, M., E-mail: katsiki@auth.g [Aristotle University of Thessaloniki, School of Physics, 54124 Thessaloniki (Greece); Pinakidou, F.; Mavromati, E.; Paloura, E.C. [Aristotle University of Thessaloniki, School of Physics, 54124 Thessaloniki (Greece); Gioulekas, D. [Aristotle University of Thessaloniki, Medical School, 54124 Thessaloniki (Greece); Grolimund, D. [Swiss Light Source, Paul Scherer Institut, 5232 Villigen (Switzerland)

    2010-02-15

    Micro-X-ray Fluorescence (mu-XRF) and Fe-K edge micro-X-ray Absorption Near Edge Structure (mu-XANES) spectroscopies are applied for the study of the distribution and the spatially-resolved bonding environment of Fe in human nails. The mu-XRF maps reveal that Fe forms islands where its concentration is up to six times higher than in the rest of the sample. Comparison of the map characteristics of two nails that belong to healthy and ill donors (affected by lung cancer), reveals that there is no significant variation in the size distribution of the Fe-rich inclusions contrary to their spatial density which is found higher in the nail of the ill donor. However, a relation between the variations of the spatial density and the illness can not be established due to the small number of the studied samples. The analysis of the Fe-K mu-XANES spectra reveals that the bonding environment of Fe varies between the samples and between different spots of the same sample with different Fe concentration. The characteristics of the pre-edge peak in the Fe-K XANES spectra indicate the presence of both Fe{sup +3} and Fe{sup +2} that participate in the formation of distorted octahedra. Finally, the area under the pre-edge peak depends linearly on the position of the absorption edge indicating variation of the Fe ligation between the samples and/or between different spots in the same sample.

  20. [Are nail polish, artificial nails and piercings allowed outside the surgical area?Recommendations for the perioperative policy

    NARCIS (Netherlands)

    Bucx, M.J.L.; Krijtenburg, P.; Scheffer, G.J.

    2017-01-01

    - An increasing number of patients wear nail polish, artificial nails or have piercings.- There is uncertainty about the perioperative management of these items, especially when located outside the surgical area.- In the majority of hospitals, patients are urged to remove these items preoperatively,

  1. Treatment Concepts of Osteogenesis Imperfecta

    Directory of Open Access Journals (Sweden)

    Ramji Lal Sahu

    2012-06-01

    Full Text Available Background: To explore the Application of the intramedullary nails for correction of deformity in the lower limbs and decrease the opportunity of refractures in children with osteogenesis imperfecta.Materials and Methods: From July 2005 to July 2009, 11 patients (5 males and 6 females, were recruited from Emergency and outpatient department having deformities of osteogenesis imperfecta in lower limbs. With 3 femurs and 5 tibias with deformity in lower limps were corrected by multiosteotomy and fixed with intramedullary interlocking nails, 6 (3 femurs and 3 tibias for Rush nails; 6 (2 femurs and 4 tibias for Ender nails; and 12 (6 femurs and 6 tibias for flexible intramedullary nails. All patients were operated under general or spinal anesthesia. Results: All deformities were perfectly corrected. All patients were available at final follow up, for 9 months to 36 months, mean 18 months. 2 patients had delayed union, 2 had superficial infection in the incision or pin tract, and 1 had refractures postoperatively. The results were excellent in 72.727% and good in 27.272% patients. Conclusion: Multiosteotomy and fixed intramedullary nails can correct the deformity in the lower limbs perfectly and decrease the opportunity of refractures in children with osteogenesis imperfecta, which has been proved to be a reliable method.

  2. Trace elements in nail polish as a source of contamination of nail clippings when used in epidemiological studies

    International Nuclear Information System (INIS)

    Favaro, P.C.; Bode, P.; De Nadai Fernandes, E.A.

    2005-01-01

    Trace elements were determined in 27 brands of nail polish using INAA so as to estimate the impact of nail polish remainders when using (finger, toe) nail clippings as a bioindicator for epidemiological studies. Fe was found to be present up to almost 1.7% in one brand. No unambiguous correlation between trace elements and color was established, though transparent polish has the lowest trace element concentrations. An estimate of the maximum effect (no removal of the paint) indicates that over-estimates of some trace element levels in nail with more than 200.000% may occur. If nail clippings will be used to study trace elements, very high demands have to be set to the efficiency and selectivity of the cleaning procedure. (author)

  3. Stiffness Analysis of Nail-Plate Joints Subjected to Short-Term Loads

    DEFF Research Database (Denmark)

    Nielsen, Jacob

    nail-plates are designed for trusses. For many years, joints were made of boards with nails, but the increasing industrialism and the need for quick and usable assembly had the result that today nearly all trusses are pre-fabricated with nail-plates. The word "nail-plate" has been used for different...... types of plates. There are two main types of nail-plates: steel plates perforated with holes in which separate nails are used and steel plates perforated by a stamping machine, so the nails are made from the plate, see figur 1.2 on page 7. This type is sometimes called "punching metal plate...

  4. Comparison of 39 post-traumatic tibia bone transports performed with and without the use of an intramedullary rod: the long-term outcomes.

    Science.gov (United States)

    Liodakis, Emmanouil; Kenawey, Mohamed; Krettek, Christian; Wiebking, Ulrich; Hankemeier, Stefan

    2011-09-01

    Bone transport can be performed with an external fixator alone or with the monorail technique which entails the combination of a fixator and an intramedullary nail. The purpose of this study was to compare the complication rates and long-term outcomes of these methods. Two groups of patients, the external fixator (n = 21) and the monorail group (n = 18), were compared. The average follow-up period was 7.9 ± 5.6 years and the mean defect length 8.3 ± 3.1 cm. Healing was achieved in 19 (90%) and 13 (72%) of the fixator and monorail patients, respectively. Six patients underwent amputations because of persistent infections (two in the fixator and four in the monorail group). The rate of deformities was significantly higher in the fixator group (p = 0.049). No statistically significant difference was found when comparing categories of the SF-36 test or the ability to work or do sports. The main advantages of the monorail method are reduction of the external fixation time and the lower rate of deformities. However, the authors recommend segmental transport with external fixator in patients with chronic infections.

  5. Do PFNA devices and Intertan nails both have the same effects in the treatment of trochanteric fractures? A prospective clinical study.

    Science.gov (United States)

    Seyhan, Mustafa; Turkmen, Ismail; Unay, Koray; Ozkut, Afsar Timucin

    2015-11-01

    To clinically and radiologically compare third-generation intramedullary nails used in the treatment of trochanteric hip fractures and to determine their efficacy. Seventy-five of 88 patients admitted to our hospital with trochanteric fractures were enrolled in the study; 43 were treated with PFNA devices and 32 with Intertan nails. The amount of compression applied during the procedure, duration of the procedure, amount of subsequent shortening in the proximal femoral area, subsequent backup of proximal screws, and changes in the tip-apex and tip-cortex distances were compared between groups. The postoperative change in the varus angle of the proximal femur and times to mobilization, full weight bearing, and fracture union were also evaluated. On early postoperative radiographs, the tip-apex distance was ≤25 mm in 86 % of patients in the PFNA group and 96.9 % of those in the Intertan group. Twelve months postoperatively, the tip-apex distance did not differ between groups. No cut-out of the screws into the coxofemoral joint was observed. Fracture healing was achieved in all patients. At 12 months postoperatively, the rates of proximal screw backup, proximal femoral shortening, and decrease in the varus angle of the proximal femur were significantly higher in the PFNA group than in the Intertan group. Trochanteric fractures may be treated effectively with PFNA devices or Intertan nails. During the healing period, the rates of reverse displacement of the proximal screw, shortening of the proximal femur, and decrease in the varus angle of the proximal femur were significantly higher in the PFNA group than in the Intertan group. Surgical technique, implant positioning, and the choice of implant play roles in the successful treatment of trochanteric fractures. Level 1, prospective, prognostic study.

  6. HEMATOMA OF THE PROXIMAL NAIL FOLD. REPORT OF 41 CASES

    Directory of Open Access Journals (Sweden)

    Chang Patricia

    2011-04-01

    Full Text Available Background: The proximal fold is an important part of the nail apparatus it contributes to the formation of the nail plate and through the cuticle acts as an impermeable barrier protecting it from any cause.Objective: To know the proximal nail fold hematoma caused by the use of pulse oximeter.Material and Methods: A descriptive study was conducted in 41 patients with proximal nail hematoma secondary to the use of oximetry in patients hospitalized in the Intermediate and Intensive Care Unit at the Hospital General de Enfermedades from December 1, 2007 to December 31, 2010.Results: We studied 41 patients with proximal nail fold hematoma secondary to the use of oximeter, 30 (73.1% were males and 11 (26.8% females. The numbers of fingers affected by pulse oximeter were in one digit. 30 (73.1% cases, in two digits 6 (14.6%, in three digits 3 (7.3%, in 4 digits 1 (2.4% and in 5 digits 1 (2.4% case. The most affected proximal nail fold was right index: 24 (58.5%, right middle 11 (26.8%, right ring 6 (14.6%, left index 12 (29.2%, and left middle 6 (14.6% cases.Conclusions: Hematomas of the proximal nail fold may be caused by different traumatisms. The use of pulse oximeter is one of them.

  7. Availability Analysis of the Ventilation Stack CAM Interlock System

    International Nuclear Information System (INIS)

    YOUNG, J.

    2000-01-01

    Ventilation Stack Continuous Air Monitor (CAM) Interlock System failure modes, failure frequencies and system availability have been evaluated for the RPP. The evaluation concludes that CAM availability is as high as assumed in the safety analysis and that the current routine system surveillance is adequate to maintain this availability. Further, requiring an alarm to actuate upon CAM failure is not necessary to maintain the availability credited in the safety analysis, nor is such an arrangement predicted to significantly improve system availability. However, if CAM failures were only detected by the 92-day functional tests required in the Authorization Basis (AB), CAM availability would be much less than that credited in the safety analysis. Therefore it is recommended that the current surveillance practice of daily simple system checks, 30-day source checks and 92-day functional tests be continued in order to maintain CAM availability

  8. Structural damage monitoring of harbor caissons with interlocking condition

    Energy Technology Data Exchange (ETDEWEB)

    Huynh, Thanh Canh; Lee, So Young; Nauyen, Khac Duy; Kim, Jeong Tae [Pukyong National Univ., Busan (Korea, Republic of)

    2012-12-15

    The objective of this study is to monitor the health status of harbor caissons which have potential foundation damage. To obtain the objective, the following approaches are performed. Firstly, a structural damage monitoring(SDM) method is designed for interlocked multiple caisson structures. The SDM method utilizes the change in modal strain energy to monitor the foundation damage in a target caisson unit. Secondly, a finite element model of a caisson system which consists of three caisson units is established to verify the feasibility of the proposed method. In the finite element simulation, the caisson units are constrained each other by shear key connections. The health status of the caisson system against various levels of foundation damage is monitored by measuring relative modal displacements between the adjacent caissons.

  9. Structural damage monitoring of harbor caissons with interlocking condition

    International Nuclear Information System (INIS)

    Huynh, Thanh Canh; Lee, So Young; Nauyen, Khac Duy; Kim, Jeong Tae

    2012-01-01

    The objective of this study is to monitor the health status of harbor caissons which have potential foundation damage. To obtain the objective, the following approaches are performed. Firstly, a structural damage monitoring(SDM) method is designed for interlocked multiple caisson structures. The SDM method utilizes the change in modal strain energy to monitor the foundation damage in a target caisson unit. Secondly, a finite element model of a caisson system which consists of three caisson units is established to verify the feasibility of the proposed method. In the finite element simulation, the caisson units are constrained each other by shear key connections. The health status of the caisson system against various levels of foundation damage is monitored by measuring relative modal displacements between the adjacent caissons

  10. Compositional Verification of Multi-Station Interlocking Systems

    DEFF Research Database (Denmark)

    Macedo, Hugo Daniel dos Santos; Fantechi, Alessandro; Haxthausen, Anne Elisabeth

    2016-01-01

    pose a big challenge to current verification methodologies, due to the explosion of state space size as soon as large, if not medium sized, multi-station systems have to be controlled. For these reasons, verification techniques that exploit locality principles related to the topological layout...... of the controlled system to split in different ways the state space have been investigated. In particular, compositional approaches divide the controlled track network in regions that can be verified separately, once proper assumptions are considered on the way the pieces are glued together. Basing on a successful...... method to verify the size of rather large networks, we propose a compositional approach that is particularly suitable to address multi-station interlocking systems which control a whole line composed of stations linked by mainline tracks. Indeed, it turns out that for such networks, and for the adopted...

  11. Software Development for Auto-Generation of Interlocking Knowledge base using Artificial Intelligence Approach

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Yun Seok [Nanseoul University (Korea); Kim, JOng Sun [Kwangwoon University (Korea)

    1999-06-01

    This paper proposes IIKBAG (Intelligent Interlocking Knowledge Base Generator) which can build automatically the interlocking knowledge base utilized as the real-time interlocking strategy of the electronic interlocking system in order to enhance it's reliability and expansion. The IIKBAG consists of the inference engine and the knowledge base. The former has an auto-learning function which searches all the train routes for the given station model based on heuristic search technique while dynamically searching the model, and then generates automatically the interlocking patterns obtained from the interlocking relations of signal facilities on the routes. The latter is designed as the structure which the real-time expert system embedded on IS (Interlocking System) can use directly in order to enhances the reliability and accuracy. The IIKBAG is implemented in C computer language for the purpose of the build and interface of the station structure database. And, a typical station model is simulated to prove the validity of the proposed IIKBAG. (author). 13 refs., 5 figs., 2 tabs.

  12. A Prospective Study to Evaluate the Management of Sub-trochanteric Femur Fractures with Long Proximal Femoral Nail.

    Science.gov (United States)

    Kumar, M; Akshat, V; Kanwariya, A; Gandhi, M

    2017-11-01

    Introduction: Sub-trochanteric fractures of the femur remains one of the most challenging fractures faced by orthopaedic surgeons. This study was done to analyse the management and complications of sub-trochanteric fractures using long proximal femoral nail (PFN). Materials and Methods: This was a prospective study of 50 patients with sub-trochanteric fractures of femur who were treated with long PFN at a tertiary care center from July 2012 to June 2016. The fractures were classified according to Seinsheimer classification. All patients were assessed functionally by Harris Hip Score. Results: Average duration of union was 17.08 weeks (range 13 to 32 weeks), union was achieved in 92% cases. Closed reduction was achieved in 68% cases and open reduction was required in 32% cases. Various intraoperative complications were seen in 12% and delayed complications in 26% of cases. Good anatomical results were achieved in 86% of cases and 14% were fair. As per Harris Hip score, excellent results were noted in 28% cases, good in 56% cases and fair in 16% cases. Conclusion: The long PFN is a reliable implant for subtrochanteric femur fractures, with high rate of bone union and minimal soft tissue damage. Intramedullary fixation has biological and biomechanical advantages, but the surgery is technically demanding.

  13. A Prospective Study to Evaluate the Management of Sub-trochanteric Femur Fractures with Long Proximal Femoral Nail

    Directory of Open Access Journals (Sweden)

    Kumar M

    2017-11-01

    Full Text Available INTRODUCTION: Sub-trochanteric fractures of the femur remains one of the most challenging fractures faced by orthopaedic surgeons. This study was done to analyse the management and complications of sub-trochanteric fractures using long proximal femoral nail (PFN. MATERIALS AND METHODS: This was a prospective study of 50 patients with sub-trochanteric fractures of femur who were treated with long PFN at a tertiary care center from July 2012 to June 2016. The fractures were classified according to Seinsheimer classification. All patients were assessed functionally by Harris Hip Score. RESULTS: Average duration of union was 17.08 weeks (range 13 to 32 weeks, union was achieved in 92% cases. Closed reduction was achieved in 68% cases and open reduction was required in 32% cases. Various intraoperative complications were seen in 12% and delayed complications in 26% of cases. Good anatomical results were achieved in 86% of cases and 14% were fair. As per Harris Hip score, excellent results were noted in 28% cases, good in 56% cases and fair in 16% cases. CONCLUSION: The long PFN is a reliable implant for sub-trochanteric femur fractures, with high rate of bone union and minimal soft tissue damage. Intramedullary fixation has biological and biomechanical advantages, but the surgery is technically demanding.

  14. Nail changes secondary to docetaxel chemotherapy : a case report

    Directory of Open Access Journals (Sweden)

    Ghafoor Qamar

    2008-01-01

    Full Text Available Abstract Introduction Docetaxel is a chemotherapy agent used in the management of many neoplastic conditions. Various side effects are known. Nail changes are often under-recognised or attributed to other causes. Case presentation We report the case of a 66 year old gentleman who received docetaxel chemotherapy for non-small cell lung cancer. He had nail changes as a complication of the treatment. Conclusion Nail toxicity is a recognised side-effect of taxane chemotherapy agents and can often persist for many months after finishing the treatment. We would like to highlight this problem, so it can be considered as a differential diagnosis in the appropriate population.

  15. Assessment of the geometry of proximal femur for short cephalomedullary nail placement: An observational study in dry femora and living subjects

    Directory of Open Access Journals (Sweden)

    Devendra Pathrot

    2016-01-01

    Full Text Available Background: Intramedullary devices have increasingly become popular and are widely used for fixation of unstable intertrochanteric and subtrochanteric fractures as well. These implants have been designed taking into consideration the anthropometry of the western population whose anthropometry varies from those of other ethnic groups. This study was carried out to assess the geometry of proximal femur for the placement of short cephalomedullary nails in our subset of patients and suggest suitable design modifications based on these parameters. Materials and Methods: The study was conducted in the following three groups: (1 Anthropometric study of 101 adult human dry femora, (2 radiographs of the same femora, and (3 radiographs of the contralateral uninjured limb of 102 patients with intertrochanteric or subtrochanteric fractures. In Group 1, standard anthropometric techniques were used to measure neck shaft angle (NSA, minimal neck width (NW, trochanteric offset, and distance from the tip of greater trochanter (GT to the lower border of lesser trochanter on the femoral shaft axis (distance X. In Group 2 and 3, the NSA, minimal NW, NW at 130° and 135°, trochanteric shaft angle (TSA, trochanteric offset, distance X, distance between the tip of GT and the point where the neck axis crosses the line joining the tip of the GT to the lower border of the lesser trochanter on the femoral shaft axis (distance Y, and canal width at 10, 15, and 20 cm from tip of GT were measured on standard radiographs. The values obtained in these three groups were pooled to obtain mean values. Various parameters of commonly used short cephalomedullary nails available for fixation of pertrochanteric fractures were obtained. These were compared to the results obtained to suggest suitable modifications in the nail designs for our subset of patients. Results: The mean parameters observed were as follows: NSA 128.07° ± 4.97 (range 107°–141°, minimum NW 29.0 ± 2.8 mm

  16. Hardwired interlock system with fault latchability and annunciation panel for electron accelerators

    International Nuclear Information System (INIS)

    Mukesh Kumar; Roychoudhury, P.; Nimje, V.T.

    2011-01-01

    A hard-wired interlock system is designed, developed, installed and tested to ensure healthy status for interlock signals, coming from the various sub-systems of electron accelerators as digital inputs. Each electron accelerator has approximately ninety-six interlock signals. Hardwired Interlock system consists of twelve-channel 19 inches rack mountable hard-wired interlock module of 4U height. Digital inputs are fed to the hard-wired interlock module in the form of 24V dc for logic 'TRUE' and 0V for logic 'FALSE'. These signals are flow signals to ensure cooling of the various sub-systems, signals from the klystron modulator system in RF Linac to ensure its healthy state to start, signals from high voltage system of DC accelerator, vacuum signals from vacuum system to ensure proper vacuum in the electron accelerator, door interlock signals, air flow signals, and area search and secure signals. This hard-wired interlock system ensures the safe start-up, fault annunciation and alarm, fault latchablity, and fail-safe operation of the electron accelerators. Safe start-up feature ensures that beam generation system can be made ON only when cooling of all the electron accelerator sub-systems are confirmed, all the fault signals of high voltage generation system are attended, proper vacuum is achieved inside the beam transport system, all the doors are closed and various areas have been searched and secured manually. Fault annunciation and alarm feature ensures that during the start up and operation of the electron accelerators, if any fault is there, that fault signal window keeps on flashing with red colour and alarm is sounded till the operator acknowledges the fault. Once acknowledged, flashing and alarm stops but display of the window in red colour remains till the operator clears the fault. Fault latchability feature ensures that if any fault has happened, accelerator cannot be started again till the operator resets that interlock signal. Fail-safe feature ensures

  17. Communities detection as a tool to assess a reform of the Italian interlocking directorship network

    Science.gov (United States)

    Drago, Carlo; Ricciuti, Roberto

    2017-01-01

    Interlocking directorships are important communication channels among companies and may have anticompetitive effect. A corporate governance reform was introduced in 2011 to prevent interlocking directorships in the financial sector. We apply community detection techniques to the analysis of the networks in 2009 and 2012 to ascertain the effect of such reform on the Italian directorship network. We find that, although the number of interlocking directorships decreases in 2012, the reduction takes place mainly at the periphery of the network. The network core is stable, allowing the most connected companies to keep their strategic position.

  18. Nailed timber beams with I composed section

    Directory of Open Access Journals (Sweden)

    Jorge Luís Nunes de Góes

    2003-01-01

    Full Text Available The employment of built-up timber beams, made of commercial dimensions pieces, is becoming increasingly important in timber structures in Brazil, mainly due to the ever-growing scarcity of timber elements in larger sizes. The built-up system has vast application, from beams for residential buildings to girders for small bridges. The objective of this work is the theoretical and experimental study of nailed timber beams with composed cross section I. The design procedure of EUROCODE 5/93 and NBR 7190/97 are shown and evaluated, as well as the theory about the subject matter. The experimental evaluation of the theoretical models was made by means of bending tests in prototypes of built-up timber beams. The obtained results shows that the EUROCODE 5/93 procedure is the most indicated for evaluating effective bending stiffness, normal and shear stresses as well as the load on fasteners.

  19. Biomechanics – Elastic Foundation Applied in Modelling of Calcaneal Nails

    Directory of Open Access Journals (Sweden)

    Sejda František

    2015-12-01

    Full Text Available This paper presents a strength analysis of a calcaneal nail (material Ti6Al4V and stainless steel which is used to treat complex heel fractures. The application focuses on a unique calcaneal nail, the C-NAIL, produced by Medin a.s. (Nové Město na Moravě, Czech Republic. The paper first presents an analysis of fracture types, treatment methods and loading of the calcaneus. It then presents an analysis of limit conditions and loading. Calculations (displacement and stress are performed for 6 and 7 fixing screws using FEM (Ansys Workbench 14 software. The calculation involves a new, original application of an elastic foundation, which effectively replaces the complex interaction of the calcaneal nail and the heel bone.

  20. Retrograde nailing for distal femur fractures in the elderly

    Directory of Open Access Journals (Sweden)

    Giddie Jasdeep

    2015-01-01

    Full Text Available Introduction: We report the results of treating a series of 56 fractures in 54 elderly patients with a distal femur fracture with a retrograde femoral nail. Methods: Fifty-four of the nails were inserted percutaneously with a closed reduction. After surgery all patients were allowed to weight bear as tolerated. Four fractures were supported in a temporary external splint. Results: The mean age of patients was 80.6 years (range 51–103 years, 52/54 (96% were females. There were no cases of nail related complications and no re-operations were required. One patient was lost to follow up. The 30-day mortality was 5/54 (9.3% and the one year mortality was 17/54 (31.5%. Conclusions: Distal femoral nail fixation provides a good method of fixation allowing immediate mobilisation for this group of patients.