Environmental Approach In Interior Design Education In Turkey

Directory of Open Access Journals (Sweden)

Derya Adıgüzel

2013-12-01

Full Text Available These days there has been a severe encroachment on nature, a large amount of waste being generated, and natural resources being used irresponsibly during the design, application and usage phases of buildings. Environmental sensitivity is necessary during the construction of new buildings and re-usage of current buildings to resolve environmental problems. In order to increase environmental sensitivity, a great responsibility falls onto interior design along with other disciplines during the creation of living spaces. The accumulation of knowledge from career training and the level of awareness will determine the practical development of environmentally sensitive interior design. Therefore the purpose of this article is to make a determination of the current state of environmental design in interior design education in Turkey. The degree to which environmental design is reflected in the curricula of interior design departments was studied. The relationship between the awareness level of the students and the educational programs will be presented through three samples. Surveys were conducted at three universities that have varying degrees of environmental design within the interior design curricula. As a result, the importance of having an environmentally conscious design understanding within the curricula of interior design and recommendations for improving the environmental design awareness of students will be presented in this article.

Project management in interior design services

OpenAIRE

Şahinoglu, Alp

1997-01-01

Ankara : Bilkent University, Department of Interior Architecture and Environmental Design and Institute of Fine Arts, 1997. Thesis (Master's) -- Bilkent University, 1997. Includes bibliographical references. In this study, the concept of project management is analyzed within the framework of interior design services. Project management has been defined as the managing and coordination of all human and physical resources, in order to accomplish the predetermined goals (aim of the proj...

Studies in Interior Design

Science.gov (United States)

Environ Planning Design, 1970

1970-01-01

Floor plans and photographs illustrate a description of the Samuel C. Williams Library at Stevens Institute of Technology, Hoboken, N.J. The unusual interior design allows students to take full advantage of the library's resources. (JW)

Interior Design Education within a Human Ecological Framework

Science.gov (United States)

Kaup, Migette L.; Anderson, Barbara G.; Honey, Peggy

2007-01-01

An education based in human ecology can greatly benefit interior designers as they work to understand and improve the human condition. Design programs housed in colleges focusing on human ecology can improve the interior design profession by taking advantage of their home base and emphasizing the human ecological framework in the design curricula.…

Interior design. Mastering the master plan.

Science.gov (United States)

Mesbah, C E

1995-10-01

Reflecting on the results of the survey, this proposed interior design master planning process addresses the concerns and issues of both CEOs and facility managers in ways that focus on problem-solving strategies and methods. Use of the interior design master plan process further promotes the goals and outcomes expressed in the survey by both groups. These include enhanced facility image, the efficient selection of finishes and furnishings, continuity despite staff changes, and overall savings in both costs and time. The interior design master plan allows administrators and facility managers to anticipate changes resulting from the restructuring of health care delivery. The administrators and facility managers are then able to respond in ways that manage those changes in the flexible and cost-effective manner they are striving for. This framework permits staff members to concentrate their time and energy on the care of their patients--which is, after all, what it's all about.

INTUITION IN INTERIOR DESIGN

OpenAIRE

Irina Solovyova

2008-01-01

Intuition enables individuals to develop an understanding of the structure of complex systems. In interior design many decisions are reached intuitively even though the process of formulating solutions may be argued rationally. Intuition is intrinsically intertwined with our collateral experiences, memories, and implicit thought. Design intuition draws on our entire experience, not only on what we consciously isolate as relevant information. In education we prohibit students from relying on t...

Creating Library Interiors: Planning and Design Considerations.

Science.gov (United States)

Jones, Plummer Alston, Jr.; Barton, Phillip K.

1997-01-01

Examines design considerations for public library interiors: access; acoustical treatment; assignable and nonassignable space; building interiors: ceilings, clocks, color, control, drinking fountains; exhibit space: slotwall display, floor coverings, floor loading, furniture, lighting, mechanical systems, public address, copying machines,…

Numerical simulation and optimized design of cased telescoped ammunition interior ballistic

Directory of Open Access Journals (Sweden)

Jia-gang Wang

2018-04-01

Full Text Available In order to achieve the optimized design of a cased telescoped ammunition (CTA interior ballistic design, a genetic algorithm was introduced into the optimal design of CTA interior ballistics with coupling the CTA interior ballistic model. Aiming at the interior ballistic characteristics of a CTA gun, the goal of CTA interior ballistic design is to obtain a projectile velocity as large as possible. The optimal design of CTA interior ballistic is carried out using a genetic algorithm by setting peak pressure, changing the chamber volume and gun powder charge density. A numerical simulation of interior ballistics based on a 35 mm CTA firing experimental scheme was conducted and then the genetic algorithm was used for numerical optimization. The projectile muzzle velocity of the optimized scheme is increased from 1168 m/s for the initial experimental scheme to 1182 m/s. Then four optimization schemes were obtained with several independent optimization processes. The schemes were compared with each other and the difference between these schemes is small. The peak pressure and muzzle velocity of these schemes are almost the same. The result shows that the genetic algorithm is effective in the optimal design of the CTA interior ballistics. This work will be lay the foundation for further CTA interior ballistic design. Keywords: Cased telescoped ammunition, Interior ballistics, Gunpowder, Optimization genetic algorithm

Interior Design Standards in the Secondary FCS Curriculum

Science.gov (United States)

Katz, Shana H.; Smith, Bettye P.

2006-01-01

This article deals with a study on interior design standards in the secondary FCS curriculum. This study assessed the importance FCS teachers placed on content standards in the interior design curriculum to help determine the amount of time and emphasis to place on the units within the courses. A cover letter and questionnaire were sent…

Interior Design Supports Art Education: A Case Study

Science.gov (United States)

Clemons, Stephanie A.

2006-01-01

Interior design, as a field of study, is a rapidly growing area of interest--particularly for teenagers in the United States. Part of this interest stems from the proliferation of design-related reality shows available through television media. Some art educators and curriculum specialists in the nation perceive the study of interior spaces as a…

Trends in CAD education in interior design programs

OpenAIRE

Ko, Hye Mi

1990-01-01

This research investigated Computer Aided Design (CAD) education in the interior design. program focusing on educators' opinions about creativity aspects including computer application, teaching materials and teaching methods as well as other trends in CAD education. A questionnaire was sent to one hundred eighty-two members of the Interior Design Educators Council (IDEC). A frequency distribution was used on 69 usable returned surveys to describe the sample characteristi...

Pre-Employment Laboratory Education. Home Furnishings/Interior Design Guidebook.

Science.gov (United States)

Texas Tech Univ., Lubbock. Home Economics Instructional Materials Center.

This guidebook is designed for use in teaching students enrolled in pre-employment laboratory education (PELE) home furnishing/interior design programs. The first of two major sections includes an overview for teachers on planning, conducting, and evaluating a home furnishings/interior design program. Specific topics discussed in section 1 include…

Content Analysis of Introductory Interior Design College Textbooks: A Study Revisited

Science.gov (United States)

Temple, Julie A.; Potthoff, Joy K.

2013-01-01

Introductory interior design texts adopted by design educators present information relevant to both historical and contemporary issues in interior design. According to one author, they provide a "survey of the field of interior design as it now exists" (Pile, 2007). A comparison of the content of contemporary texts with those of more…

41 CFR 101-26.506 - Interior planning and design services.

Science.gov (United States)

2010-07-01

... SOURCES AND PROGRAM 26.5-GSA Procurement Programs § 101-26.506 Interior planning and design services. In... various phases of interior planning and design. These services will be provided either directly or through... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Interior planning and...

Virtual Reality as Innovative Approach to the Interior Designing

Science.gov (United States)

Kaleja, Pavol; Kozlovská, Mária

2017-06-01

We can observe significant potential of information and communication technologies (ICT) in interior designing field, by development of software and hardware virtual reality tools. Using ICT tools offer realistic perception of proposal in its initial idea (the study). A group of real-time visualization, supported by hardware tools like Oculus Rift HTC Vive, provides free walkthrough and movement in virtual interior with the possibility of virtual designing. By improving of ICT software tools for designing in virtual reality we can achieve still more realistic virtual environment. The contribution presented proposal of an innovative approach of interior designing in virtual reality, using the latest software and hardware ICT virtual reality technologies

Interior Design Trends in Libraries.

Science.gov (United States)

Sager, Don, Ed.

2000-01-01

Four contributing authors discuss perspectives on current trends in library interior design. Articles include: "Trends in Library Furnishings: A Manufacturer's Perspective" (Andrea Johnson); "Libraries, Architecture, and Light: The Architect's Perspective" (Rick McCarthy); "The Library Administrator's Perspective" (Chadwick Raymond); and "The…

Using BIM Technology to Optimize the Traditional Interior Design Work Mode

Science.gov (United States)

Zhu, Ning Ke

2018-06-01

the development of BIM technology and application in the field of architecture design has produced results, but BIM technology and application in the field of interior design is still immaturity because of construction and decoration engineering separation. The article analyzes the problems that BIM technology lead to the interior design work mode optimization, from the 3D visualization work environment, real-time collaborative design mode, physical analysis design mode, information integration design mode state the application in interior design.

Process design (exterior – interior design)

OpenAIRE

Sandeva, Vaska; Despot, Katerina

2013-01-01

The design is a complex process of spatial organization and creative problem object. It switched to the study of complex natural conditions (analysis and evaluation) and the development of compositional solution structure of the object. Construction and shaping of all buildings whether it is exterior or interior, be it street, Square apartment building, park or greater forest massif, public facility (administrative buildings, hospitals, schools, galleries etc.), residential object (garsion...

Field Dependence and Vocational Choice of Interior Design Students.

Science.gov (United States)

Davis, Diane M.; And Others

One hundred ninety-three interior design college students were administered the Group Embedded Figures Test, a measure of field dependence, in order to evaluate two of Witkin's hypotheses regarding career choice. The career-differentiation hypothesis predicted that students electing to major in interior design would be field independent because…

Interior Design's Role in Educational Specifications.

Science.gov (United States)

Keller, Mary Ann

1986-01-01

An experienced interior designer, equipped with a well-written educational specification, will specify the best materials and coordinate colors, materials, and furnishings in line with the district's budget. (MLF)

Crash simulations for interior design

NARCIS (Netherlands)

Poeze, E.; Slaats, P.M.A.

1996-01-01

With the increasing number of compact cars, safety aspects becomes increasingly important for interior designs. The smaller dimensions of these cars do not only decrease the car mass, but also the energy absorption length, resulting in a more severe crash pulse. As a consequence, the inertia loading

Design for subjective well-being in interior architecture

NARCIS (Netherlands)

Petermans, A.; Pohlmeyer, A.E.

2014-01-01

Can interior environments engage people in pleasurable and meaningful experiences and thereby have a positive influence on their happiness? This paper discusses why and how interior architects might want to consider implementing ideas in relation to ‘design for subjective well-being’. Despite of

Safety Design Requirements for The Interior Architecture of Scientific Research Laboratories

International Nuclear Information System (INIS)

ElDib, A.A.

2014-01-01

The paper discusses one of the primary objectives of interior architecture design of research laboratories (specially those using radioactive materials) where it should provide a safe, accessible environment for laboratory personnel to conduct their work. A secondary objective is to allow for maximum flexibility for safe research. Therefore, health and safety hazards must be anticipated and carefully evaluated so that protective measures can be incorporated into the interior architectural design of these facilities wherever possible. The interior architecture requirements discussed in this paper illustrate some of the basic health and safety design features required for new and remodeled laboratories.The paper discusses one of the primary objectives of interior architecture design of research laboratories (specially those using radioactive materials) where it should provide a safe, accessible environment for laboratory personnel to conduct their work. A secondary objective is to allow for maximum flexibility for safe research. Therefore, health and safety hazards must be anticipated and carefully evaluated so that protective measures can be incorporated into the interior architectural design of these facilities wherever possible. The interior architecture requirements discussed in this paper illustrate some of the basic health and safety design features required for new and remodeled laboratories.

Emotion and interior space design: an ergonomic perspective.

Science.gov (United States)

Reddy, Swathi Matta; Chakrabarti, Debkumar; Karmakar, Sougata

2012-01-01

Interaction between the users and their environment is spontaneous and unavoidable. This interaction can be positive or negative. A good interior space is about considering all the physical, environmental and cognitive elements and harmonizing them to make it a space that feels right, functionally and emotionally. The important element that has to be considered the most in an interior space is the "user". Balancing all these elements is a challenging job and results in a perfect interior space design. This paper intends to bring to light the necessity of designing an optimum interior space, which is a balance of the user's choice and the mandatory standards that ought to be followed for user safety and convenience. There has to be an intervening domain of ergonomics which will guide to bring out a balance between the personal choice of the user and the usual standards followed. It should also provide a step-by-step information, guidance and direction to act to the specifications and standards systematically to adapt an integrated approach of handling all the elements holistically which will indeed result in a good interior space.

Interior design conceptual basis

CERN Document Server

Sully, Anthony

2015-01-01

Maximizing reader insights into interior design as a conceptual way of thinking, which is about ideas and how they are formulated. The major themes of this book are the seven concepts of planning, circulation, 3D, construction, materials, colour and lighting, which covers the entire spectrum of a designer’s activity. Analysing design concepts from the view of the range of possibilities that the designer can examine and eventually decide by choice and conclusive belief the appropriate course of action to take in forming that particular concept, the formation and implementation of these concepts is taken in this book to aid the designer in his/her professional task of completing a design proposal to the client. The purpose of this book is to prepare designers to focus on each concept independently as much as possible, whilst acknowledging relative connections without unwarranted influences unfairly dictating a conceptual bias, and is about that part of the design process called conceptual analysis. It is assu...

Interior Design: Teacher's Instructional Guide.

Science.gov (United States)

Hays, Tricia

This teacher's instructional guide, which is part of a family and consumer sciences education series focusing on a broad range of employment opportunities, is intended to assist teachers responsible for teaching one- and two-year interior design programs for Texas high school students. The following are among the items included: (1) introductory…

The Prefabricated Interior Design Studio: An Exploration into the History and Sustainability of Interior Prefabrication

Science.gov (United States)

Schneiderman, Deborah; Freihoefer, Kara

2013-01-01

This article examines the integration of prefabrication into an interior design studio. A review of the literature revealed that while there is a paucity of categorical research focused on this subject, the subject is historically significant with an abundance of evidence regarding the prefabrication of the interior environment dating back…

Interior design as a motivation for creating creative spaces

OpenAIRE

Weiner, Nina

2013-01-01

The thesis underlines the importance of a thoughtful, systematic and modern way of designing classrooms due to its effects on productivity and creativity of pupils. The theoretical part focuses on the relationship between creativity and art classroom; a particular attention is given to the elements of interior design of art classrooms, enabling such organisation of space that fosters creativity in pupils. The emphasis is given on colour and lights as essential elements of interior design. In ...

Local Material as a Character of Contemporary Interior Design in Indonesia

Science.gov (United States)

Susanto, Dalhar; Puti Angelia, Dini; Ningsih, Tria Amalia

2017-12-01

Excellent design needs to fulfill universal requirements (utility, aesthetic, ergonomic, durability, and safe). Besides of all the requirements, an excellent design has to be shown its distinctiveness, uniqueness, and identity. To create an excellent design, we can use one of locality approach, it means local material utilization. From time to time, the material is linking each other in unity with environment context, human, knowledge, culture, social, economy, user needs and material availability. The aspects are the important part to get the reflective identity and local values in architecture and interior design work in Indonesia. It can be proofed by some of the architecture and interior work precedent, like traditional or vernacular in Nusantara or contemporary interior design work from Indonesian designer who has recognized to promote the locality value. However interior design works in Indonesia cannot be shown the characteristic of Indonesia identity and locality currently, it is different than another country work, like Japan, Italy, or Scandinavia. Interior design work from these countries can be easily known with accentuating of characteristic their places, such as material, color, detail, or geometry pattern in the product that has been produced. Meanwhile, some of the region in Indonesia are tropical climate and brought about much of local material and it has potential to make a unique work which has the local identity. This paper will discuss the result of a searching potential of local material usefulness as interior design identity in Indonesia. This research is done by typology method, which means discover the presence of some of the architecture elements appears to be related material. The elements are the pattern, color, craftsmanship, building element, object, and type of material in some of the contemporary interior design work in Indonesia were considered superior and capable of lifting elements recognized locality.

Virtual Interior Design Based On VRML AND JAVA

Science.gov (United States)

Qi, Shaoliang

Virtual reality has been involved in a wide range of academic and commercial applications. It can give users a natural feeling of the environment by creating realistic virtual worlds. In this paper, we use vrml and java to discuss the virtual interior design. EAI and JASI are used to realize the interaction between user and virtual interior scene.

Interior Space: Representation, Occupation, Well-Being and Interiority

OpenAIRE

Power, Jacqueline

2014-01-01

This article will provide an overview of space as it is understood and engaged with from within the discipline of interior design/interior architecture. Firstly, the term interior will be described. Secondly, the paper will discuss space as a general concept, before exploring what space is speifically for the interior design/interior architecture discipline. How is space understood? What does space "look" like for interuior designers/interior architects?.

Review on Application of Building Information Modelling in Interior Design Industry

Directory of Open Access Journals (Sweden)

Abd Hamid Abu Bakar

2016-01-01

Full Text Available Building Information Modeling (BIM is a flourishing device and approach for Architecture, Engineering and Construction (AEC which assist; the planning, design, constructions and operation with particular to commence the designing in several components of the building, a comprehensive understanding of the activities and needed in all aspects. An aspect of activities and needs is the first step to be analysed in the design and it is the responsibility of professionals’ interior designers. To solve the problems, is required to attach with the certain factors such as space planning, specifications fixture, equipment and material, furniture and finishing, lighting fixing and service management. BIM application can provide interior designers such as simulation, analysis, design process and solution with team members. Furthermore, some of the interior designer also using BIM as to organize, documenting data and optimise detail information in solving the problem in the develop process. BIM technology and practices not only to improve the construction and design process development that only the project faster, cost effectively, and prolong but it also helps to increase the capacity of BIM professional by improvise the careers and fields. In the Malaysian context, BIM is still fresh in interior desogn industry.

Innovation in Deep Space Habitat Interior Design: Lessons Learned From Small Space Design in Terrestrial Architecture

Science.gov (United States)

Simon, Matthew A.; Toups, Larry

2014-01-01

Increased public awareness of carbon footprints, crowding in urban areas, and rising housing costs have spawned a 'small house movement' in the housing industry. Members of this movement desire small, yet highly functional residences which are both affordable and sensitive to consumer comfort standards. In order to create comfortable, minimum-volume interiors, recent advances have been made in furniture design and approaches to interior layout that improve both space utilization and encourage multi-functional design for small homes, apartments, naval, and recreational vehicles. Design efforts in this evolving niche of terrestrial architecture can provide useful insights leading to innovation and efficiency in the design of space habitats for future human space exploration missions. This paper highlights many of the cross-cutting architectural solutions used in small space design which are applicable to the spacecraft interior design problem. Specific solutions discussed include reconfigurable, multi-purpose spaces; collapsible or transformable furniture; multi-purpose accommodations; efficient, space saving appliances; stowable and mobile workstations; and the miniaturization of electronics and computing hardware. For each of these design features, descriptions of how they save interior volume or mitigate other small space issues such as confinement stress or crowding are discussed. Finally, recommendations are provided to provide guidance for future designs and identify potential collaborations with the small spaces design community.

Manipulating the optical properties of symmetrically branched Au/Pd nanocrystals through interior design.

Science.gov (United States)

DeSantis, Christopher J; Skrabalak, Sara E

2014-05-25

Au/Pd octopods with hollow, cubic interiors and Oh symmetry were synthesized for the first time by etching core@shell Pd@Au/Pd octopods to selectively remove their Pd interiors. Integration of multiple architectural features - in this case branching symmetry, composition, and interior design - into one nanostructure provides design strategies to new plasmonic colloids.

Re-Design Interior Boutique Hotel Di Malang

OpenAIRE

Mariana Wibowo, Inez Natalia Suteja

2016-01-01

Malang is one of the places nostalgia tourists by Dutchman. Design boutique hotel take building's dutch colonial. Boutique hotel having the characteristics of unique, historic, and fancy. Uniqueness boutique hotel ditonjolkan in the atmosphere hotel that looks homey with support 3star class hotel facilities. The concept of the basis of design with apply a style of design colonial into the interior of boutique hotel good with the material the wall, the floor, ceiling, column and the elements d...

Special Features of Using Secondary Materials in the Interior Design of Public Dining Establishments

Science.gov (United States)

Kuznetsova, Irina; Hapchuk, Olena; Lukinov, Vitaly

2017-10-01

This article analyses the latest publications studying the use and practical application of secondary resources as raw materials in design. This analysis is based on the list of secondary resources and their applications in interior decoration. In particular, the interiors of public catering enterprises were analysed. Restaurants with different functional purposes that were classified into several categories with specific peculiarities of interior design were identified. This article presents and describes different types of public catering enterprises based on those categories. The interior design of a public catering enterprise is regarded as a considerably complex system. Different types of secondary materials were reviewed to identify the most frequently used materials for interior space design. This article describes the main peculiarities of the use of secondary materials and presents examples of their practical application. The function of secondary materials in the interior design of public catering enterprises were detected and reviewed. On the basis of the analysis, several directions for the practical application of our results in the field of public catering enterprise design were suggested.

On ethics and the earthquake resistant interior design of buildings.

Science.gov (United States)

Hurol, Yonca

2014-03-01

The most common tectonic quality of modern structures, such as frame systems, is their flexibility; they are open for change. Although this characteristic is a big advantage in comparison to the inflexible masonry structures of the past, it might also create some serious problems, such as e.g. the lack of safety in the event of an earthquake, if the flexibility is not used consciously by architects and interior designers. This article attempts to define and establish some rules for the interior design of buildings with reinforced concrete frame systems. The rules for making subtractions from these structures and extending them by making additions to them are contained within this article. The main objective of this article is to derive some ethical values from these rules. Thus, the conclusion of the article focuses on the derivation of some ethical values for achieving earthquake resistant interior design of buildings with reinforced concrete frame systems.

The Barriers and Causes of Building Information Modelling Usage for Interior Design Industry

Science.gov (United States)

Hamid, A. B. Abd; Taib, M. Z. Mohd; Razak, A. H. N. Abdul; Embi, M. R.

2017-12-01

Building Information Modeling (BIM) has since developed alongside the improvement in the construction industry, purposely to simulate the design, management, construction and documentation. It facilitates and monitors the construction through visualization and emphasizes on various inputs to virtually design and construct a building using specific software. This study aims to identify and elaborate barriers of BIM usage in interior design industry in Malaysia. This study is initiated with a pilot survey utilising sixteen respondents that has been randomly chosen. Respondents are attached with interior design firms that are registered by Lembaga Arkitek Malaysia (LAM). The research findings are expected to provide significant information to encourage BIM adoption among interior design firms.

Design team simplifies interior to aid patient recuperation.

Science.gov (United States)

Fishback, B W; Krewson, C

1981-02-16

Vanderbilt University Medical Center's architect and interior designer coordinated efforts to minimize medical components by painting them a neutral color and sought a unified approach throughout the building to make it more personal without a substantial cost increase.

A Survey on the Color of Interior Design for University Students

OpenAIRE

Takata, Hiroshi

2008-01-01

The purpose of this study is to clarify the actual conditions of the color on interior design for university students. At first, the author carried out the questionnaire survey in order to grasp the characteristics of respondents and their consciousness of interior and color design. Based on the results of the questionnaire survey, the relationship between the characteristics of respondents and their consciousness was studied. Especially, the influence of the respondents' academic grade and t...

Explorations in Teaching Sustainable Design: A Studio Experience in Interior Design/Architecture

Science.gov (United States)

Gurel, Meltem O.

2010-01-01

This article argues that a design studio can be a dynamic medium to explore the creative potential of the complexity of sustainability from its technological to social ends. The study seeks to determine the impact of an interior design/architecture studio experience that was initiated to teach diverse meanings of sustainability and to engage the…

Interior Design 1992 Buyers Guide issue.

Science.gov (United States)

1992-01-30

The Interior Design Magazine Buyers Guide is compiled with you, the designer, in mind. So it's packed with the most comprehensive collection of sources available anyplace--arranged for fast, easy access. First, the Keyword Index presents all the Buyers Guide product categories alphabetically (see the first tab divider). Refer to the page number indicated in the Product Index (second tab divider) to view various manufacturers of products under each category heading. Addresses, phone and fax numbers, regional and international showroom/representatives are located in the A-Z Index (third tab divider) in alphabetical order. Consult the table of contents for trade associations, lighting consultants, marts, and other useful sections.

Assessment as a Barrier in Developing Design Expertise: Interior Design Student Perceptions of Meanings and Sources of Grades

Science.gov (United States)

Smith, Kennon M.

2013-01-01

This article reports on a portion of a larger qualitative study focused on a group of interior design students' perceptions of their educational experiences. Twelve interior design students enrolled in their final studio course participated in interviews intended to elicit their perceptions of key barriers encountered during their undergraduate…

Interior design criteria for successful hospital patient rooms

OpenAIRE

Bilir, Seda

1997-01-01

Ankara : The Department of Interior Architecture and Environmental Design and Institute of Fine Arts of Bilkent University, 1997. Thesis (Master's) -- Bilkent University, 1997. Includes bibliographical references leaves 94-99 In this study, the design requirements of hospital acute-care patient rooms, which support the recovery and well-being of the patients, are examined. Patients' psycho-spatial needs which may be complementary to the healing effects of the medical treatme...

Residential Interior Design as Complex Composition: A Case Study of a High School Senior's Composing Process

Science.gov (United States)

Smagorinsky, Peter; Zoss, Michelle; Reed, Patty M.

2006-01-01

This research analyzed the composing processes of one high school student as she designed the interiors of homes for a course in interior design. Data included field notes, an interview with the teacher, artifacts from the class, and the focal student's concurrent and retrospective protocols in relation to her design of home interiors. The…

Interior Design Styles and Socio-demographic Characteristics in Egypt: From the concept of Zeitgeist

Directory of Open Access Journals (Sweden)

Rasha Mahmoud Ali El-Zeiny

2016-01-01

Full Text Available Interior design plays an important role in reflecting the social and cultural environments of countries and showing the characteristics of the age. The previous literature has suggested that people’s preferences for interior design styles are influenced by social distinctions, based on education level and age. In this study, we have argued more precisely socio – demographic factors (gender, age, income, major and city that affect the Egyptians’ preferences for interior design styles, and have discussed to what extent do the people preferences reflect Zeitgeist in Egypt. The findings supported the idea that socio-demographic factors can explain people’s design preferences.

Computer-assisted ergonomic analysis for vehicle interior design

NARCIS (Netherlands)

Punte, P.A.J.; Oudenhuijzen, A.J.K.

2000-01-01

TNO Human Factors is involved in the process of designing and testing a new concept for driver workplaces in passenger cars, i.e. with a horizontally fixed driver seat and adjustable pedals, steering wheel and instrument panel. This new concept is intended to achieve an interior space and

The Attitudes of Interior Design Students towards Sustainability

Science.gov (United States)

Ruff, Caimen Leigh; Olson, Margot A.

2009-01-01

To measure attitudes toward environmental issues, interior design students responded to a four-part survey: demographics, ecology, sustainability, and comments. The ecology section was composed of modifications of questions from the New Ecological Paradigm Scale (Dunlap et al. "Journal of Environmental Education," 9:10-19, 2000). The researchers…

The Status of Graphical Presentation in Interior/Architectural Design Education

Science.gov (United States)

Gurel, Meltem O.; Basa, Inci

2004-01-01

This article argues that interior/architectural design education favours a dominance of final presentation over the design process in the studio environment, particularly in the evaluation of a project. It suggests that the appeal of design juries for pleasant drawings, which may shift the emphasis from the project itself to its representation,…

Stakeholder involvement in stages of a participatory process illustrated in interior design cases

DEFF Research Database (Denmark)

Vink, Peter; van Rhijn, Gu; Seim, Rikke

2008-01-01

In a previous study (Vink et al., 2008) an overview was made of the involvement of different stakeholders in a participatory design process. In this paper this overview was used to describe four participatory design cases focused on improvising productivity, health, and comfort by interior design....... It appeared that this overview is useful to describe the involvement in participatory interior design projects. However, it can only serve as an initial benchmark as much is dependent on the specific case at hand....

Service-Learning and Interior Design: A Case Study

Science.gov (United States)

Sterling, Mary

2007-01-01

The case study approach was used to analyze experiential learning through its three components: knowledge, action, and reflection. Two interior design courses were integrated through a university service-learning project. The restoration/adaptive reuse of a 95-year-old library building was to serve as a prototype for future off-campus…

Emergency evacuation : how better interior design can improve passenger flow

NARCIS (Netherlands)

Boer, L.C.; Skjong, R.

2001-01-01

The paper presents some conclusions from the EU basic research project "MEPdesign" relevant for design of ship interiors. The findings are discussed with regard to passenger flow as a function of design parameters. The paper explains that current evacuation analyses may be overly optimistic. The

On implementation of the extended interior penalty function. [optimum structural design

Science.gov (United States)

Cassis, J. H.; Schmit, L. A., Jr.

1976-01-01

The extended interior penalty function formulation is implemented. A rational method for determining the transition between the interior and extended parts is set forth. The formulation includes a straightforward method for avoiding design points with some negative components, which are physically meaningless in structural analysis. The technique, when extended to problems involving parametric constraints, can facilitate closed form integration of the penalty terms over the most important parts of the parameter interval. The method lends itself well to the use of approximation concepts, such as design variable linking, constraint deletion and Taylor series expansions of response quantities in terms of design variables. Examples demonstrating the algorithm, in the context of planar orthogonal frames subjected to ground motion, are included.

A Tool for the Automated Design and Evaluation of Habitat Interior Layouts

Science.gov (United States)

Simon, Matthew A.; Wilhite, Alan W.

2013-01-01

The objective of space habitat design is to minimize mass and system size while providing adequate space for all necessary equipment and a functional layout that supports crew health and productivity. Unfortunately, development and evaluation of interior layouts is often ignored during conceptual design because of the subjectivity and long times required using current evaluation methods (e.g., human-in-the-loop mockup tests and in-depth CAD evaluations). Early, more objective assessment could prevent expensive design changes that may increase vehicle mass and compromise functionality. This paper describes a new interior design evaluation method to enable early, structured consideration of habitat interior layouts. This interior layout evaluation method features a comprehensive list of quantifiable habitat layout evaluation criteria, automatic methods to measure these criteria from a geometry model, and application of systems engineering tools and numerical methods to construct a multi-objective value function measuring the overall habitat layout performance. In addition to a detailed description of this method, a C++/OpenGL software tool which has been developed to implement this method is also discussed. This tool leverages geometry modeling coupled with collision detection techniques to identify favorable layouts subject to multiple constraints and objectives (e.g., minimize mass, maximize contiguous habitable volume, maximize task performance, and minimize crew safety risks). Finally, a few habitat layout evaluation examples are described to demonstrate the effectiveness of this method and tool to influence habitat design.

Water in Architecture and its Usage in Contemporary Houses Interior Design

Directory of Open Access Journals (Sweden)

Samaneh Sedighi

2017-10-01

Full Text Available As one of the most fundamental natural elements, water has had a great share in the formation and architecture of architectural buildings. This research examines the effect of water and its presence in contemporary houses. Architecture is not merely a tridimensional compound of forms in space, but a manifestation of a sense or a thought in it. According to Feng Shui, the building where we live in can be the cause of balance and health for human being. As a whole, anything around us has active and mobile energies; by designing a building in a way that positive energies can follow around easier, one can easier bring happiness for the dwellers. Feng Shui is based on the harmony among five elements of water, wind, soil, fire and metal. Because of its stream, water removes negative energies and revives and mobilizes positive ones thereby having a great impact on the current of energies. Considering the fact that contemporary houses are small in space, designer does not feel free in the usage of water in internal spaces, thus he/she should utilize patterns that resemble or associate the feeling of water in the living environment. Conceptual, functional and aesthetic basics of water have been examined first via library studies and note taking from various papers and books. Then, the three qualities would be analyzed in Iranian architecture, and the properties of past people will be examined to emphasize material, spiritual and psychological aspects of water. Then, I will assess the philosophical basics of Feng Shui in using water for interior spaces via a qualitative method and content analysis, usage of water based on Feng Shui in interior design and decoration of homes. Considering these concepts, natural possibilities of water in interior architecture and its limitations in interior space design would be assessed and recognized. Finally, some patterns would be presented to use water in interior spaces of contemporary apartments.

Group Projects in Interior Design Studio Classes: Peer Feedback Benefits

Science.gov (United States)

Jurado, Juan A.

2011-01-01

Group projects have been shown to be effective for providing peer feedback in classrooms. While students in regular enrollment classes benefit from peer feedback, low-enrollment classes face many challenges. This study compares peer feedback effectiveness between two interior design studio classes with different design projects. In one class,…

The effect of lighting exterior and interior design

OpenAIRE

Sandeva, Vaska; Despot, Katerina

2017-01-01

Light, whether natural or artificial is a very important element in interior and exterior design. It actually helps us to see color because color is visible to our eye because the substances of which was obtained reflect wavelengths of light. Light as an element of design influences other elements. It can make the space large or small, showy and bright or dark and unpleasant. Places that are well-lit with clean, clear light make the space seem larger, while the fading light and shadows ...

Exploring Socio-Technical Features of Green Interior Design of Residential Buildings: Indicators, Interdependence and Embeddedness

Directory of Open Access Journals (Sweden)

Yan Ning

2016-12-01

Full Text Available This research aims to develop indicators for assessing green interior design of new residential buildings in China, grounded in the socio-technical systems approach. The research was carried out through a critical literature review and two focus group studies. The results show that the boundaries of green interior design were identified with respect to three dimensions, namely performance, methodology and stakeholders. The socio-technical systems approach argues for the recognition of the interdependence between the systems elements and the feature of embeddedness. The interdependence of the systems elements exists within each of these three dimensions and across them. It is also found that the socio-technical systems of green interior design are embedded in the social, regulatory and geographic context. Taking interior design of residential buildings as the empirical setting, this study contributes to the literature of green building assessment by presenting a socio-technical systems approach.

Implications of Building Information Modeling on Interior Design Education: The Impact on Teaching Design Processes

Directory of Open Access Journals (Sweden)

Amy Roehl, MFA

2013-06-01

Full Text Available Currently, major shifts occur in design processes effecting business practices for industries involved with designing and delivering the built environment. These changing conditions are a direct result of industry adoption of relatively new technologies called BIM or Building Information Modeling. This review of literature examines implications of these changing processes on interior design education.

Group Dynamics in the Interior Design Studio: Student Perceptions

Science.gov (United States)

Hill, Caroline

2008-01-01

This article presents the findings of a study measuring the classroom climates in collegiate interior design studios and considers these findings within the group dynamics theory framework. Three groups of students completed the College Classroom Environment Scales (CCES) questionnaire. Five of the six CCES subscale F ratios were statistically…

Interior Design Based on Forough Farrokhzad Poetry

Directory of Open Access Journals (Sweden)

Mahsa Sanami

2018-03-01

Full Text Available The main purpose of this study is to correlate between art, literature, architect and visualization to translate the emotions and aspirations embodied in a well-known poet such as Forough Farrokhzad. Forough Farrokhzad widely regarded as a famous Iranian poet and an advocate for women’s liberation and independence. She wrote during a time when Iranian women were facing extensive discrimination and prejudice. Many of her works are rich in feminist related aspects of Iranian women. By visualization of Forough’s inner feelings, one can see a great revaluation in society towards women feelings and emotions. Like any other human, poets and artist both have thoughts and dreams rich in colors and words capsulizing their imaginary world in possible dreams which are all related to each person’s personality, culture, environment and etc. One of the ways to understand a poet is to understand the depth of his/her thoughts through his/her poems. Thus the main purpose of this research is to review interior design based on in depth analysis of related poems. Psychoanalysis of symbols, themes and colors used in poems, can be used to supplement words in extracting symptoms and energy depicting the poet inner feelings and imaginations when designing. The results of the discussing symbols and colors used by Forough in most of her poems, indicate her interest in life, death, love, society, intellectuality and philosophy. Finally the researchers through usage of visual effects and pictures used in her designs tries to assist the viewers to understand and feel the poet’s emotions and passions for life at the time of creating the poems. Thus, it can be assumed that the interior design is based on poetry rich in motion and dynamism.

Thermal Comfort-CFD maps for Architectural Interior Design

DEFF Research Database (Denmark)

Naboni, Emanuele; Lee, Daniel Sang-Hoon; Fabbri, Kristian

2017-01-01

opportunities of movable interior partitions (operated by the users) could be estimated, providing a new layer of information to the designer. The applicability of the thermal maps within an architectural design process is discussed adopting standard energy simulation comfort outputs as a reference......Within the context of nearly Zero-Energy Buildings, it is debated that the energy-centred notion of design, proposed by regulatory frames, needs to be combined with a further focus toward users’ comfort and delight. Accordingly, the underlying theory of the research is that designers should take...... responsibility for understanding the heat flows through the building parts and its spaces. A design, which is sensible to the micro-thermal conditions coexisting in a space, allows the inhabitants to control the building to their needs and desires: for instance, maximising the benefits of heat gain from the sun...

Building Information Modelling: Challenges and Barriers in Implement of BIM for Interior Design Industry in Malaysia

Science.gov (United States)

Hamid, A. B. Abd; Taib, M. Z. Mohd; Razak, A. H. N. Abdul; Embi, M. R.

2018-04-01

Building Information Modelling (BIM) is an innovative approach that has developed crossways the global in architecture, engineering and construction (AEC) industry. The construction industry of Malaysia has undergone a rapid development and dynamic technology adoption in advance and methods between the players industry and stakeholders. Consequently, limited technologies and devices have not been successful as it should have been. This study will be emphasizing scenarios of challenges and barriers in adopting BIM in interior design industry in Malaysia. The study was emphasizing the challenges and barriers in BIM usage from the designer’s perspective. The data are collected through the questionnaires as to identifying the barriers, knowledge, readiness and awareness and distributed to interior design firms were selected randomly. The finding of this research is to examine the barriers and causes of variables BIM usage for interior design industry in Malaysia. The outcome of this study is to identify the constraint of adoption BIM in interior design industry compare to others players in same industry.

The Neutron star Interior Composition Explorer (NICER): design and development

DEFF Research Database (Denmark)

Gendreau, Keith C.; Arzoumanian, Zaven; Adkins, Phillip W.

2016-01-01

During 2014 and 2015, NASA's Neutron star Interior Composition Explorer (NICER) mission proceeded successfully through Phase C, Design and Development. An X-ray (0.2-12 keV) astrophysics payload destined for the International Space Station, NICER is manifested for launch in early 2017...

The Interior Design Simulator. Courseware Evaluation for Vocational and Technical Education.

Science.gov (United States)

Worts, Nancy; And Others

This courseware evaluation rates the Interior Design Simulator program developed by Orange Juice Software Systems. (This program--not contained in this document--allows the user to design a room of any shape with maximum dimensions of 14 x 26 feet.) Part A describes the program in terms of subject area (furniture arrangement) and hardware…

41 CFR 102-76.25 - What standards must Federal agencies meet in providing architectural and interior design services?

Science.gov (United States)

2010-07-01

... Federal agencies meet in providing architectural and interior design services? 102-76.25 Section 102-76.25...) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction § 102-76.25 What standards must Federal agencies meet in providing architectural and interior design services...

Descobrir, explorar, apropriar: o design de interiores como elemento valorizador da arquitectura - um exemplo prático

OpenAIRE

Miranda, Ana

2013-01-01

A arquitectura de interiores, o design de interiores e decoração de interiores podem ser entendidos como manifestações de uma mesma arte, manifestações estas variando apenas na escala e na profundidade da intervenção, da edificação de paredes novas, à construção do mobiliário ou à edificação de revestimentos. Reconhecendo que estas manifestações da mesma arte têm em comum o facto de projectarem para o ser humano, é importante que a sociedade entenda o designer de interiores, como complemen...

Exploring the Effectiveness of Blended Learning in Interior Design Education

Science.gov (United States)

Afacan, Yasemin

2016-01-01

This study explores how blended learning can contribute to interior design students' learning outcomes, their engagement with non-studio courses and affect their learning achievements. Within the framework of the study, a blended learning experience was carried out in "IAED 342 Building Performance" module at Bilkent University, Turkey.…

Improving FCS Accountability: Increasing STEM Awareness with Interior Design Modules

Science.gov (United States)

Etheredge, Jessica; Moody, Dana; Cooper, Ashley

2014-01-01

This paper demonstrates ways in which family and consumer sciences (FCS) educators can explore more opportunities to integrate Science, Technology, Engineering, and Math (STEM) principles into secondary education curriculum. Interior design is used as a case study for creating learning modules that incorporate STEM principles in a creative and…

Building Design Guidelines of Interior Architecture for Bio safety Levels of Biology Laboratories

International Nuclear Information System (INIS)

ElDib, A.A.

2014-01-01

This paper discusses the pivotal role of the Interior Architecture As one of the scientific disciplines minute to complete the Architectural Sciences, which relied upon the achievement and development of facilities containing scientific research laboratories, in terms of planning and design, particularly those containing biological laboratories using radioactive materials, adding to that, the application of the materials or raw materials commensurate with each discipline of laboratory and its work nature, and by the discussion the processing of design techniques and requirements of interior architecture dealing with Research Laboratory for electronic circuits an their applications with the making of its prototypes

Desain Interior Gedung Kesenian Jakarta

Directory of Open Access Journals (Sweden)

Sri Rachmayanti

2011-04-01

Full Text Available The purpose of this study was to examine the interior design of Gedung Kesenian Jakarta in detail. Another thing is to obtain complete data and analyze the interior design development of GKJ.  This study will described in terms of design style and different designs since the early period of this building, the arrival of the Dutch until the present era. Besides aesthetic of interior design, it will review technical factors in the building that related to its interior design, such as acoustic, air conditioning, lighting system, sound system. This research is based on data literartures and interviews with the GKJ. In conclusion, it will discuss the existence of GKJ in relation to local identity, culture and heritage.   

Perceptions of Interior Design Program Chairs Regarding Credentials for Faculty

Science.gov (United States)

Miller, Beth R.

2017-01-01

The purpose of this study was to determine whether program chairs in interior design have a preferred degree credential for candidates seeking a full-time, tenure-track position or other full-time position at their institution and to determine if there is a correlation between this preference and the program chair's university's demographics,…

Design of interior-functionalized fully acetylated dendrimers for anticancer drug delivery.

Science.gov (United States)

Hu, Jingjing; Su, Yunzhang; Zhang, Hongfeng; Xu, Tongwen; Cheng, Yiyun

2011-12-01

In this study, dendrimers was synthesized by introducing functional groups into the interior pockets of fully acetylated dendrimers. NMR techniques including COSY and 2D-NOESY revealed the molecular structures of the synthesized dendrimers and the encapsulation of guest molecule such as methotrexate within their interior pockets. The synthesized polymeric nanocarriers showed much lower cytotoxicity on two cell lines than cationic dendrimers, and exhibited better performance than fully acetylated dendrimers in the sustained release of methotrexate. The results provided a new strategy in the design of non-toxic dendrimers with high performance in the delivery of anti-cancer drugs for clinical applications. Copyright © 2011 Elsevier Ltd. All rights reserved.

Teaching Art a Greener Path: Integrating Sustainability Concepts of Interior Design Curriculum into the Art Education Curriculum

Science.gov (United States)

Hasio, Cindy; Crane, Tommy J.

2014-01-01

Interior design is seldom integrated within the general art education curriculum because the subject matter is generally segregated as a commercial art. However, the importance of interior design concepts of sustainability in art education can really help a student understand the scale and proportion of space and mass, and how sustainability is…

Building Design Guidelines for Interior Architecture Concerned with Animal Researches Facilities

International Nuclear Information System (INIS)

ElDib, A.A. E.

2014-01-01

This paper discusses the most important design guidelines elements and characteristics for animal facilities, in order to achieve and maintain highest efficiency can be, with respect to the pivot role of Interior Architecture as one of the accurate specializations for completing the Architectural Sciences, for designer/s concerned with those types of facilities, (specially those using radioactive materials). These building types known as vivariums, are specially designed, accommodating and having sophisticated controlled environments for the care and maintenance of experimental animals, and are related to, but distinct from other research laboratories premises

Work Models in the Design Process for House Interior and Exterior: Physical or Virtual?

Science.gov (United States)

Bradecki, Tomasz; Uherek-Bradecka, Barbara

2017-10-01

The article presents the effects of research on different types of models of single family houses and multifamily houses. Exterior layout and interior functional layout are the main drivers for the final result of a design. Models are an important medium for presentation of architectural designs and play a pivotal role in explaining the first idea to people and potential clients. Although 3D models have unlimited possibilities of representation, some people cannot understand or ‘feel’ the designed space. The authors try to test how to combine the interior and the exterior in a single synthetic model. Several models of different houses have been presented in the article. All the case studies were developed with physical models, 3D models, and 2D hand sketches. The main focus of the work with the models was to achieve a coherent vision for future feeling of open space in designed houses. The research shows how synthetic models might be helpful in the design process. The research was carried in the URBAN model research group (urbanmodel.org, Gliwice, Poland) that consists of academic researchers and architects. The models reflect architectural experience gathered by the authors during their work on theoretical models, architectural projects and by supervision on site during construction site visits. Conclusions might be helpful for developers, architects, interior designers and architecture students.

Internationalizing an Interior Design Course: A Model for Global FCS Curricula

Science.gov (United States)

Charlson, Julie; Vouchilas, Gus

2010-01-01

Accreditation for Family and Consumer Sciences and for Interior Design programs includes standards to globalize education of undergraduate students. An integrative approach to planning curriculum relates the concept of global interdependence to the development of critical thinking skills for student decision-making. This was addressed in modifying…

A subtractive approach to interior intrusion detection system design

International Nuclear Information System (INIS)

Sons, R.J.; Graham, R.H. Jr.

1986-01-01

This paper discusses the subtractive approach to interior intrusion detection system design which assumes that all sensors are viable candidates until they are subjected to the constraints imposed by a particular facility. The constraints are determined by a sequence of questions concerning parameters such as threat definition, facility description and operation, environment, assets to be protected, security system capabilities, and cost. As a result of the questioning, some sensors will be eliminated from the candidate list, and the ''best'' set of sensors for the facility will remain. This form of questioning could be incorporated into an expert system aiding future intrusion detection system designs

The Integration of Interior Architecture Education with Digital Design Approaches

Science.gov (United States)

Yazicioglu, Deniz Ayse

2011-01-01

It is inevitable that as a result of progress in technology and the changes in the ways with which design is conceived, interior architecture schools should be updated according to these requirements and that new educational processes should be tried out. It is for this reason that the scope and aim of this study have been determined as being the…

Interior design of the lunar outpost

Science.gov (United States)

Kennedy, Kriss J.

1990-01-01

This paper is part of an ongoing study on the interior design of a lunar outpost habitat facility. The concept presented represents the work done up to and including August 1989. This concept is part of NASA's ongoing effort to explore alternative options for planet surface systems habitation. Results of a volume analog study to determine the required pressurized volume are presented along with an internal layout of the habitat facility. The concept presented in this paper is a constructible lunar habitat that provides a living and working environment for a crew of 12. It is a 16-m diameter spherical pneumatic structure which contains 2145 cubic meters of volume. Five levels of living and working areas make up the 742 sq m of floor space. A 2-m vertical circulation shaft at the center allows for transfer of crew and equipment.

Interior intrusion detection systems

Energy Technology Data Exchange (ETDEWEB)

Rodriguez, J.R.; Matter, J.C. (Sandia National Labs., Albuquerque, NM (United States)); Dry, B. (BE, Inc., Barnwell, SC (United States))

1991-10-01

The purpose of this NUREG is to present technical information that should be useful to NRC licensees in designing interior intrusion detection systems. Interior intrusion sensors are discussed according to their primary application: boundary-penetration detection, volumetric detection, and point protection. Information necessary for implementation of an effective interior intrusion detection system is presented, including principles of operation, performance characteristics and guidelines for design, procurement, installation, testing, and maintenance. A glossary of sensor data terms is included. 36 figs., 6 tabs.

Interior intrusion detection systems

International Nuclear Information System (INIS)

Rodriguez, J.R.; Matter, J.C.; Dry, B.

1991-10-01

The purpose of this NUREG is to present technical information that should be useful to NRC licensees in designing interior intrusion detection systems. Interior intrusion sensors are discussed according to their primary application: boundary-penetration detection, volumetric detection, and point protection. Information necessary for implementation of an effective interior intrusion detection system is presented, including principles of operation, performance characteristics and guidelines for design, procurement, installation, testing, and maintenance. A glossary of sensor data terms is included. 36 figs., 6 tabs

Prefab-Interiority

DEFF Research Database (Denmark)

Frier, Marie; Fisker, Anna Marie; Kirkegaard, Poul Henning

2010-01-01

qualities is significantly dependent on our constructive ability to economically and production-technically join building elements. Consequently this paper explores the potential for developing interiority as a theory and design principle for transforming constructive challenges within prefab practice....../S. As a research result the paper suggests a positioning of interiority as a theory and design principle for developing a sensuous prefab practice......., and practical realm of prefabrication, leaving the produced houses as monotonous box-like constructions rather than inhabitable homes. But what are the sensuous qualities actually spatially defining a home, and how to formulate design principles for developing and revealing these qualities within prefab...

Exploratory shaft facility preliminary designs - Gulf Interior Region salt domes

International Nuclear Information System (INIS)

1983-09-01

The purpose of the Preliminary Design Report, Gulf Interior Region, is to provide a description of the preliminary design for an Exploratory Shaft Facility on the Richton Dome, Mississippi. This issue of the report describes the preliminary design for constructing the exploratory shaft using the Large Hole Drilling method of construction and outlines the preliminary design and estimates of probable construction cost. The Preliminary Design Report is prepared to complement and summarize other documents that comprise the design at the preliminary stage of completion, December 1982. Other design documents include drawings, cost estimates and schedules. The preliminary design drawing package, which includes the construction schedule drawing, depicts the descriptions in this report. For reference, a list of the drawing titles and corresponding numbers are included in the Appendix. The report is divided into three principal sections: Design Basis, Facility Description and Construction Cost Estimate

The Net-Generation Interior Design Student: An Exploratory Study Assessing Learning and Engagement within a Computer Simulation Environment

Science.gov (United States)

Peterson, Julie Ellen

2009-01-01

The first purpose of this experimental study was to determine if there were effects on achievement between traditional pencil-and-paper instructional strategies and computer simulated instructional strategies used to teach interior design business ethics. The second purpose was to determine the level of engagement of interior design students using…

Approach to interior design for passive direct gain solar homes

Energy Technology Data Exchange (ETDEWEB)

Kachadorian, C.C.

1980-01-01

In response to requests from buyers and builders of direct gain passive solar homes interior design criteria either specific to, or emphasized by, passive solar buildings are investigated. Problems of high sunlight penetration, secondary illumination, material selection, sound control and psychology are approached. Material deterioration, fading, glare, noise, and a sense of spacial confinement can be minimized, contributing to the appeal and saleability of passive solar homes.

Graduate Education in Interior Design: Opinions and Perceptions of Professional Leaders

Science.gov (United States)

Hegde, Asha; Hill, Caroline

2011-01-01

Twenty-two executives from the top 100 interior design (ID) firms in the United States completed a survey on the marketability of an advanced degree in ID and on the content areas of most interest to practitioners. Findings revealed that practitioners anticipate the demand for advanced ID degrees to increase considerably. Specialized knowledge…

Design Innovations and Implementation Challenges - A Case of Smart Textiles in Future Hospital Interiors

DEFF Research Database (Denmark)

Mogensen, Jeppe; Jørgensen, Poul-Erik; Poulsen, Søren Bolvig

2014-01-01

Concerned with the overall challenges of implementing design innovations, this paper relates to the specific case of applying smart textiles in future hospital interiors. The methodological approach is inspired by design thinking and implementation processes, and through the scope of a developed ...

The Importance of Interior Design Elements as They Relate to Student Outcomes.

Science.gov (United States)

Tanner, C. Kenneth; Langford, Ann

This study investigated the following questions: (1) "What are the perceptions that elementary school principals have concerning the influence of interior design elements such as floor and wall coverings, lighting, flexibility, acoustics, color, texture, patterns, cleanliness, and maintenance on student achievement, teacher retention, and student…

Designscholar: Examining Creative Thinking in an Online Learning Community for Interior Design Graduate Students

Science.gov (United States)

Ransdell, Marlo Evelyn

2009-01-01

This study examined the creative thinking of interior design graduate students in an online learning community. This study considered potential changes in creative thinking (fluency, flexibility, originality, and elaboration) about design research resulting from peer-led online discussions. It further studied the learner characteristics of…

Bright ideas. Some rules of thumb for interior lighting design and selection.

Science.gov (United States)

Hunter, Claudia M

2002-07-01

Interior lighting design and selection can be a demanding assignment for a health facilities manager or department head. It requires a balance between conflicting needs, such as providing good task lighting for a nursing station while also shielding luminaires that are visible from patients' rooms to avoid glare.

The Neutron star Interior Composition Explorer (NICER): design and development

OpenAIRE

Gendreau, Keith C.; Arzoumanian, Zaven; Adkins, Phillip W.; Albert, Cheryl L.; Anders, John F.; Aylward, Andrew T.; Baker, Charles L.; Balsamo, Erin R.; Bamford, William A.; Benegalrao, Suyog S.; Berry, Daniel L.; Bhalwani, Shiraz; Black, J. Kevin; Blaurock, Carl; Bronke, Ginger M.

2016-01-01

During 2014 and 2015, NASA's Neutron star Interior Composition Explorer (NICER) mission proceeded successfully through Phase C, Design and Development. An X-ray (0.2-12 keV) astrophysics payload destined for the International Space Station, NICER is manifested for launch in early 2017 on the Commercial Resupply Services SpaceX-11 flight. Its scientific objectives are to investigate the internal structure, dynamics, and energetics of neutron stars, the densest objects in the universe. During P...

Functional textiles in hospital interiors

DEFF Research Database (Denmark)

Mogensen, Jeppe

This PhD thesis explores the possibilities and design qualities of using functional textiles in the interior of hospital environments, and is the result of a three years collaboration between Aalborg University, Department of Civil Engineering, and VIA University College, VIA Design. The project...... that the physical environments affect the patients’ level of stress and influence their process of recovery and healing. However, although research in this field of hospital design has increased substantially in recent years, knowledge on the use of new materials and textiles in hospital interiors is still rather...... limited. Concerned with the design potentials of using textiles in hospital interiors, the purpose of the PhD project has been to explore the possibilities and design qualities of using these materials in hospital design. Relating to both technical and aesthetic aspects of using functional textiles...

Interior design preferences of residents, families, and staff in two nursing homes.

Science.gov (United States)

Miller, D B; Goldman, L E; Woodman, S A

1985-01-01

The small number of respondents and the absence of specific demographic data concerning the three categories of respondents represented definite limitations. Further investigation in other long-term care facilities clearly is indicated. However, as a preliminary survey of preferences in nursing home interior design, several interesting findings have emerged: Patients, staff and families all emphasized patient safety and function over aesthetics. Yet, more residents than staff and families were concerned with appearance. Although experts advocate creating a home-like atmosphere in the nursing home, 50% or more of each group applied different criteria for specific design elements for private homes and for long-term care institutions. Design preferences for the three groups were similar, with an emphasis on modern furniture, painted walls, resilient tile rather than carpet, blinds, pastel and warm colors, and the use of paintings as accessories. Contrary to study assumptions, design features that promote patient individuality (e.g., patient artwork) received much greater emphasis from staff than from patients and families. Environmental change was considered an important aspect of interior design. Of the three constituencies, staff was most aware of periodic changes in decor and considered change as "very important" more often than did families or patients. As the nature of the nursing home patient population has changed--with residents presenting more disability and less rehabilitation potential and less likelihood of returning home--the ambiance of facilities has assumed even more importance. Clearly, the design preferences of residents who live in the facility are of paramount importance. However, it is also helpful to have an environment that is pleasing to family members who often experience difficulty in ongoing visitations, particularly to intellectually impaired relatives. Maintaining staff morale at a high level is a constant challenge in a long-term care

A Pre- and Post-Evaluation of Integrating Sustainability Curriculum by Inserting Okala Modules into an Interior Design Materials and Methods Course

Science.gov (United States)

Schneiderman, Deborah; Freihoefer, Kara

2012-01-01

Purpose: The purpose of this paper is to examine the integration of Okala curriculum into Interior Design coursework. Okala, as a teaching package, is utilized extensively in industrial design education. However, this study examines the expansion and insertion of Okala modules in an existing interior design curriculum. The Okala modules included…

49 CFR 179.12 - Interior heater systems.

Science.gov (United States)

2010-10-01

... Design Requirements § 179.12 Interior heater systems. (a) Interior heater systems shall be of approved design and materials. If a tank is divided into compartments, a separate system shall be provided for... 49 Transportation 2 2010-10-01 2010-10-01 false Interior heater systems. 179.12 Section 179.12...

Measure Guideline: Summary of Interior Ducts in New Construction, Including an Efficient, Affordable Method to Install Fur-Down Interior Ducts

Energy Technology Data Exchange (ETDEWEB)

Beal, D.; McIlvaine , J.; Fonorow, K.; Martin, E.

2011-11-01

This document illustrates guidelines for the efficient installation of interior duct systems in new housing, including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. This document illustrates guidelines for the efficient installation of interior duct systems in new housing. Interior ducts result from bringing the duct work inside a home's thermal and air barrier. Architects, designers, builders, and new home buyers should thoroughly investigate any opportunity for energy savings that is as easy to implement during construction, such as the opportunity to construct interior duct work. In addition to enhanced energy efficiency, interior ductwork results in other important advantages, such as improved indoor air quality, increased system durability and increased homeowner comfort. While the advantages of well-designed and constructed interior duct systems are recognized, the implementation of this approach has not gained a significant market acceptance. This guideline describes a variety of methods to create interior ducts including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. As communication of the intent of an interior duct system, and collaboration on its construction are paramount to success, this guideline details the critical design, planning, construction, inspection, and verification steps that must be taken. Involved in this process are individuals from the design team; sales/marketing team; and mechanical, insulation, plumbing, electrical, framing, drywall and solar contractors.

Exploratory shaft conceptual design report: Gulf Interior Region salt domes

International Nuclear Information System (INIS)

1983-07-01

This conceptual design report summarizes the conceptualized design for an exploratory shaft facility at a representative site in the Gulf Interior Region of the United States (Louisiana and Mississippi). Conceptualized designs for other possible locations (Paradox Basin in Utah and Permian Basin in Texas) are summarized in separate reports. The purpose of the exploratory shaft facility is to provide access to the reference repository horizon to permit in-situ testing of the salt. The in-situ testing is necessary to verify repository salt design parameters, evaluate isotropy and homoqeneity of the salt, and provide a demonstration of the constructability and confirmation of the design to gain access to the repository. The fundamental purpose of this conceptual design report is to assure the feasibility of the exploratory shaft project and to develop a reliable cost estimate and realistic schedule. Because a site has not been selected and site-specific subsurface data are not available, it has been necessary to make certain assumptions in order to develop a conceptural design for an exploratory shaft facility in salt. As more definitive information becomes available to support the design process, adjustments in the projected schedule and estimated costs will be required

Modeling vehicle interior noise exposure dose on freeways: Considering weaving segment designs and engine operation.

Science.gov (United States)

Li, Qing; Qiao, Fengxiang; Yu, Lei; Shi, Junqing

2017-07-05

Vehicle interior noise functions at the dominant frequencies of 500 Hz below and around 800 Hz, which fall into the bands that may impair hearing. Recent studies demonstrated that freeway commuters are chronically exposed to vehicle interior noise, bearing the risk of hearing impairment. The interior noise evaluation process is mostly conducted in a laboratory environment. The test results and the developed noise models may underestimate or ignore the noise effects from dynamic traffic and road conditions and configuration. However, the interior noise is highly associated with vehicle maneuvering. The vehicle maneuvering on a freeway weaving segment is more complex because of its nature of conflicting areas. This research is intended to explore the risk of the interior noise exposure on freeway weaving segments for freeway commuters and to improve the interior noise estimation by constructing a decision tree learning-based noise exposure dose (NED) model, considering weaving segment designs and engine operation. On-road driving tests were conducted on 12 subjects on State Highway 288 in Houston, Texas. On-board Diagnosis (OBD) II, a smartphone-based roughness app, and a digital sound meter were used to collect vehicle maneuvering and engine information, International Roughness Index, and interior noise levels, respectively. Eleven variables were obtainable from the driving tests, including the length and type of a weaving segment, serving as predictors. The importance of the predictors was estimated by their out-of-bag-permuted predictor delta errors. The hazardous exposure level of the interior noise on weaving segments was quantified to hazard quotient, NED, and daily noise exposure level, respectively. Results showed that the risk of hearing impairment on freeway is acceptable; the interior noise level is the most sensitive to the pavement roughness and is subject to freeway configuration and traffic conditions. The constructed NED model shows high predictive

DESIGN INFORMATION REPORT: PROTECTION OF WASTEWATER LAGOON INTERIOR SLOPES

Science.gov (United States)

A problem common to many wastewater treatment and storage lagoons is erosion of the interior slopes. Erosion may be caused by surface runoff and wind-induced wave action. The soils that compose the steep interior slopes of lagoons are especially susceptible to erosion and slumpin...

Facilitating Toddler Interaction through Interior Environmental Design in a Child Care Setting.

Science.gov (United States)

Wynn, Ruth L.; And Others

This study was a joint undertaking of interior environmental designers and a child developmentalist. The goal of the study was to increase peer interation between children in two classes held in one classroom. Children were observed for 7 weeks, in three periods: weeks 2 and 3 (time 1); weeks 4 and 5 (time 2); and weeks 6 and 7 (time 3). Observers…

COLOR PERCEPTION IN INTERIOR DESIGN

OpenAIRE

ÖZSAVAŞ, Nilay

2016-01-01

In this study, it is mentioned about color that is a keyfactor of interior architecture profession. Firstly, space perception, colorand space interaction, effects of space, color and user relationship is explainedexcept color theories and definitions. Within this scope these are scrutinizingboth perception of color in the space and material and lighting issues thathave a big role in perception. Recent searches, practice methods and evaluationwith examples play a part in this article. It is ai...

A superlinear interior points algorithm for engineering design optimization

Science.gov (United States)

Herskovits, J.; Asquier, J.

1990-01-01

We present a quasi-Newton interior points algorithm for nonlinear constrained optimization. It is based on a general approach consisting of the iterative solution in the primal and dual spaces of the equalities in Karush-Kuhn-Tucker optimality conditions. This is done in such a way to have primal and dual feasibility at each iteration, which ensures satisfaction of those optimality conditions at the limit points. This approach is very strong and efficient, since at each iteration it only requires the solution of two linear systems with the same matrix, instead of quadratic programming subproblems. It is also particularly appropriate for engineering design optimization inasmuch at each iteration a feasible design is obtained. The present algorithm uses a quasi-Newton approximation of the second derivative of the Lagrangian function in order to have superlinear asymptotic convergence. We discuss theoretical aspects of the algorithm and its computer implementation.

Penerapan Psikologi Desain pada Elemen Desain Interior

Directory of Open Access Journals (Sweden)

Budi Setiawan

2014-10-01

Full Text Available One of main interior designer’s assignments is to solve the problem within the facility. Problems may occur because the activities of design decision had done or will be done on the facility are not maximized. This problem can be reduced by rethinking the design through psychology design. Utilizing psychology design will help designer decide a better judgment of objects that affects the person using it in routine. The example of interior objects is wall, door, floor, color, and other elements of interior. Desk research method was used to support this article trough data collection from books and other professional institution websites. At the end, the conclusion of this article does not directly impact the result since it took time to persuade judgment of the user, but positively it will construct designer to rethink the design object.  

Designing interior space for drivers of passenger vehicle

Directory of Open Access Journals (Sweden)

Spasojević-Brkić Vesna K.

2014-01-01

Full Text Available The current study is a review of our previous papers with certain improvements, so it proves the hypothesis that passenger vehicles are still not sufficiently adapted to man in terms of ergonomics, especially from the aspect of interior space. In the ergonomic adjustment of passenger vehicles, the limits of anthropomeasures and technical limitations, are the most important. The methodology mainly uses operative investigations, and the 'man-vehicle' system is optimized within existing limitations. Here, we also explain original methodology for modeling that space. The fact that there is a point '0' as the origin point of a coordinate system with x, y and z axes of the man-vehicle system, which can be considered to be more or less fixed, enabled us to determine more accurately the mechanical and mathematical codependence in this system. The paper also proves that the anthropomeasures of length have mechanical and mathematical functions which also determine the width, i.e. all three dimensions and provides the design of the space behind the windscreen glass, the position of the steering wheel and the position of the foot commands with space for feet and knees determined, as well as the total space which the driver occupies. It is proved that the floor-ceiling height of a vehicle is primarily affected by the anthropomeasures of seating height and lower leg, while width is affected by the anthropomeasures of lower and upper leg and only then by shoulder width, so that the interior space for the driver of a passenger vehicle is 1250 mm and the width for knees spread at seat level is 926 mm maximum.

Design and test of aircraft engine isolators for reduced interior noise

Science.gov (United States)

Unruh, J. F.; Scheidt, D. C.

1982-01-01

Improved engine vibration isolation was proposed to be the most weight and cost efficient retrofit structure-borne noise control measure for single engine general aviation aircraft. A study was carried out the objectives: (1) to develop an engine isolator design specification for reduced interior noise transmission, (2) select/design candidate isolators to meet a 15 dB noise reduction design goal, and (3) carry out a proof of concept evaluation test. Analytical model of the engine, vibration isolators and engine mount structure were coupled to an empirical model of the fuselage for noise transmission evaluation. The model was used to develop engine isolator dynamic properties design specification for reduced noise transmission. Candidate isolators ere chosen from available product literature and retrofit to a test aircraft. A laboratory based test procedure was then developed to simulate engine induced noise transmission in the aircraft for a proof of concept evaluation test. Three candidate isolator configurations were evaluated for reduced structure-borne noise transmission relative to the original equipment isolators.

Color in interior spaces

OpenAIRE

Demirörs, Müge Bozbeyli

1992-01-01

Ankara : The Department of Interior Architecture and Environmental Design and the Institute of Fine Arts of Bilkent University, 1992. Thesis (Master's) -- -Bilkent University, 1992. Includes bibliographical references leaves 95-99. Color can be approached from different perspectives and disciplines such as, biology, theory, technology, and psychology. This thesis discusses color, from the stand point of interior spaces, which to some extent involves most of these discipli...

Scout-view assisted interior micro-CT

International Nuclear Information System (INIS)

Sharma, Kriti Sen; Narayanan, Shree; Agah, Masoud; Holzner, Christian; Vasilescu, Dragoş M; Jin, Xin; Hoffman, Eric A; Yu, Hengyong; Wang, Ge

2013-01-01

Micro computed tomography (micro-CT) is a widely-used imaging technique. A challenge of micro-CT is to quantitatively reconstruct a sample larger than the field-of-view (FOV) of the detector. This scenario is characterized by truncated projections and associated image artifacts. However, for such truncated scans, a low resolution scout scan with an increased FOV is frequently acquired so as to position the sample properly. This study shows that the otherwise discarded scout scans can provide sufficient additional information to uniquely and stably reconstruct the interior region of interest. Two interior reconstruction methods are designed to utilize the multi-resolution data without significant computational overhead. While most previous studies used numerically truncated global projections as interior data, this study uses truly hybrid scans where global and interior scans were carried out at different resolutions. Additionally, owing to the lack of standard interior micro-CT phantoms, we designed and fabricated novel interior micro-CT phantoms for this study to provide means of validation for our algorithms. Finally, two characteristic samples from separate studies were scanned to show the effect of our reconstructions. The presented methods show significant improvements over existing reconstruction algorithms. (paper)

Student Perceptions and Performance in Online and Offline Collaboration in an Interior Design Studio

Science.gov (United States)

Cho, Ji Young; Cho, Moon-Heum

2014-01-01

Competence in collaboration is one of the critical abilities that interior design majors are expected to develop during the course of their education; however, few students are competent to collaborate with others online. The purposes of this study were to identify student perceptions and performance in online collaboration compared to those of…

The ideal usage of sustainable materials and local resources of the interior space design in Jordan

Energy Technology Data Exchange (ETDEWEB)

Fahmi Hussien, Mayyadah [Department of Interior Design, Faculty of Architect and Art, Petra University (Jordan)], Email: Mayada19732004@yahoo.com

2011-07-01

A large amount of waste is generated by buildings over their life cycle, from construction and operation to destruction. Sustainable design principles and recycling programs in buildings can help moderate this waste. The simplest way is directly through the materials used in the building's construction. The materials and resources used should focus on the health and productivity consequences for the building's inhabitants and its environmental, social and economic impacts. This aim of this study is to make certain recommendations with respect to the use of sustainable building materials and resources in indoor spaces in Jordan. A general overview of collection and storage of recyclable materials, waste management, material reuse, and green and rapidly renewable materials is given. Sustainable material usage in the elements of interior design in Jordan is also discussed in two case studies. A set of indicators is proposed which identify the ideal sustainable materials and resources for use in interior design in Jordan to provide a healthy living environment.

Memahami Estetika dari Sudut Pandang Desain Interior

Directory of Open Access Journals (Sweden)

Yunida Sofiana

2015-07-01

Full Text Available The term aesthetic has always become part of design. Without aesthetic, design has just a functional object. Aesthetic in design, particularly in interior design, has been influenced by many factors, which are aesthetic value, aesthetic perception, and time frame. Aesthetic has subjective meaning related to time frame and objective meaning related to implementation of element and principles of design on aesthetic term. Aesthetic perception is how we judge and see the object using our own thinking and value. Time frame is where and when the aesthetic value happens. Interior design trend right now has been influenced by technology in many ways so the concept of modern design theme is always the best choice for designer. However, using modern theme as a design concept has to be implemented as a whole theme and related to aesthetical value so that the design will gain much appreciation from others. This paper used deductive method to explain the theory of aesthetic and the implementation of aesthetic value in interior design context. Design should speak louder than it looked. 

A preliminary design of interior structure and foundation of an inflatable lunar habitat

Science.gov (United States)

Yin, Paul K.

1989-01-01

A preliminary structural design and analysis of an inflatable habitat for installation on the moon was completed. The concept takes the shape of a sphere with a diameter of approximately 16 meters. The interior framing provides five floor levels and is enclosed by a spherical air-tight membrane holding an interior pressure of 14.7 psi (101.4kpa). The spherical habitat is to be erected on the lunar surface with the lower one third below grade and the upper two thirds covered with a layer of lunar regolith for thermal insulation and shielding against radiation and meteoroids. The total dead weight (earth weight) of the structural aluminum, which is of vital interest for the costly space transportation, is presented. This structural dead weight represents a preliminary estimate without including structural details. The design results in two versions: one supports the weight of the radiation shielding in case of deflation of the fabric enclosure and the other assumes that the radiation shielding is self supporting. To gain some indication of the amount of structural materials needed if the identical habitat were installed on Mars and Earth, three additional design versions were generated where the only difference is in gravity. These additional design versions are highly academic since the difference will be much more than in gravity alone. The lateral loading due to dust storms on Mars and wind loads on Earth are some examples. The designs under the lunar gravity are realistic. They may not be adequate for final material procurement and fabrication, however, as the connection details, among other reasons, may effect the sizes of the structural members.

Ergonomic evaluation of interior design of Shoka vehicle and proposing recommendations for improvement.

Science.gov (United States)

Mazloumi, Adel; Mohammadreze, Fallah

2012-01-01

One of the applications of ergonomics disciplinary is designing driver workstation compatible to users' characteristics. The aim of this study was evaluation of interior design of Shoka vehicle with respect to the accommodation for Iranian population and proposing suggestions for customizing design of this vehicle. This study was a descriptive-analytical study conducted among thirty men from Iranian drivers population in 5, 50, 95 percentiles of the stature variable. Objective variables related to the occupant packaging and vehicle visual aspects including anthropometric variables, frontal, lateral, and side view and so on were investigated first. Then, subjective variables related to the driver mental workload and body comfort discomfort were studied using BMDMW and comfort questionnaires during 2-hour driving trial sessions. Occupant packaging variables and hand-arm angle showed the least accommodation percent (%53). Seating angles showed low accommodation as well (%73). Among three percentile groups there were no significant differences between the mean values of mental workload during two hours driving task. And, the mean value related to the comfort discomfort was 3.9 during driving sessions. Considering the findings in this study, it can be conclude that seating angles need correction and optimization. Taking mental workload results into account, it can be concluded that the interior design of the studied car had no influence on drivers' mental workload. From the aspect of comfort discomfort, Shoka vehicle showed neutral state among drivers. Optimizing seating angles, decreasing vibration, correcting stiffness of seating pan are suggested for customization of the ergonomics aspect of this vehicle.

Vision-based overlay of a virtual object into real scene for designing room interior

Science.gov (United States)

Harasaki, Shunsuke; Saito, Hideo

2001-10-01

In this paper, we introduce a geometric registration method for augmented reality (AR) and an application system, interior simulator, in which a virtual (CG) object can be overlaid into a real world space. Interior simulator is developed as an example of an AR application of the proposed method. Using interior simulator, users can visually simulate the location of virtual furniture and articles in the living room so that they can easily design the living room interior without placing real furniture and articles, by viewing from many different locations and orientations in real-time. In our system, two base images of a real world space are captured from two different views for defining a projective coordinate of object 3D space. Then each projective view of a virtual object in the base images are registered interactively. After such coordinate determination, an image sequence of a real world space is captured by hand-held camera with tracking non-metric measured feature points for overlaying a virtual object. Virtual objects can be overlaid onto the image sequence by taking each relationship between the images. With the proposed system, 3D position tracking device, such as magnetic trackers, are not required for the overlay of virtual objects. Experimental results demonstrate that 3D virtual furniture can be overlaid into an image sequence of the scene of a living room nearly at video rate (20 frames per second).

Vinyl by design: creating interior spaces that stand the test of time.

Science.gov (United States)

2002-01-01

Managing design liability, avoiding risk and providing successful buildings are founded upon a conscious awareness of many important details. A key component of a designer's professionalism is understanding potential problems before they occur and proactively specifying the solutions to them. Familiarity with the inherent characteristics of any building material, along with the performance capabilities of specifiable products made with that material, aids in this process. Documenting the selection of a product in the project specifications should take this understanding into account. Knowing the important role of proper product installation--and, where necessary, calling upon the expertise of product manufacturers--should not be underestimated. Each part of the process has a major impact on whether the interior spaces delivered to a building owner provide lasting gratification, value, user satisfaction and recognition of the design professional's strategic importance to the project's overall success.

Interior intrusion alarm systems

International Nuclear Information System (INIS)

Prell, J.A.

1978-01-01

In meeting the requirements for the safeguarding of special nuclear material and the physical protection of licensed facilities, the licensee is required to design a physical security system that will meet minimum performance requirements. An integral part of any physical security system is the interior intrusion alarm system. The purpose of this report is to provide the potential user of an interior intrusion alarm system with information on the various types, components, and performance capabilities available so that he can design and install the optimum alarm system for his particular environment. In addition, maintenance and testing procedures are discussed and recommended which, if followed, will help the user obtain the optimum results from his system

PhD Thesis: Functional Textiles in Hospital Interiors

DEFF Research Database (Denmark)

Mogensen, Jeppe Emil

The PhD thesis explores the possibilities and design qualities of using functional textiles in the interior of hospital environments, and is the result of a three-year collaboration between Aalborg University, Department of Civil Engineering, and VIA University College, VIA Design. The thesis...... years, knowledge on the use of interior materials and textiles are still rather limited. Contemporary hospital design has been widely criticised of being too institutional and clinical, and one of the main reasons for this experience may be related to the use of ‘cold’, hard-surfaced materials...... of plastic, vinyl and steel. These materials also dominate the new hospitals, designed and constructed these years, and despite the increased focus on the design concept healing architecture, the rational requirements of ef cient cleaning and maintenance still seems to direct the interior design of hospital...

Kajian Gaya Interior Pada Restoran Tip Top di Kota Medan

OpenAIRE

Kevin

2016-01-01

The purpose of this study was to identify / determine the style of interior design that is applied to the Tip Top Restaurant in Medan as well as the public perception of the interior arrangement of Tip Top Restaurant in Medan by using qualitative and quantitative research methods. Qualitative research methods now that the observation / observation, observation of interior elements Tip Top restaurant is analyzed based on the criteria of interior design, this is done in order to ...

Service platforms management strategy: case study of an interior design firm

Directory of Open Access Journals (Sweden)

Leonel Del Rey de Melo Filho

2015-03-01

Full Text Available Platform management is a strategic tool for firms of various sizes, although it demands studies in the service sector. The aim of this paper is to investigate a use of platform management, designed to reach flexibility and operational dynamics in service projects. The studied platform is evaluated as a strategic resource in a particular case. The contributions of the service platform were explored from Resource-Based View (RBV and Service Marketing (SM perspectives, to study their effects on firms’ performance. The research strategy used was an exploratory case study in an interior design firm. The data collection techniques included a participant observation, document analysis and a focus group with firm managers. The research demonstrated that platform management is a strategic resource that assists with the planning of internal capabilities, market positioning, and provides better customer service.

The Effects of Using Color Microfiche Upon Achievement in a Course on Interior Home Design.

Science.gov (United States)

Aleamoni, Lawrence M.; And Others

A study was devised to replicate an earlier study which examined the effects of using color microfiche on achievement in a course on interior home design. The microfiche contained representative slides taken from the class lectures. Subjects, who were 136 college students enrolled in the course, were divided into three groups: Group One was…

Interior spatial layout with soft objectives using evolutionary computation

NARCIS (Netherlands)

Chatzikonstantinou, I.; Bengisu, E.

2016-01-01

This paper presents the design problem of furniture arrangement in a residential interior living space, and addresses it by means of evolutionary computation. Interior arrangement is an important and interesting problem that occurs commonly when designing living spaces. It entails determining the

Support-free interior carving for 3D printing

Directory of Open Access Journals (Sweden)

Yue Xie

2017-03-01

Full Text Available Recent interior carving methods for functional design necessitate a cumbersome cut-and-glue process in fabrication. We propose a method to generate interior voids which not only satisfy the functional purposes but are also support-free during the 3D printing process. We introduce a support-free unit structure for voxelization and derive the wall thicknesses parametrization for continuous optimization. We also design a discrete dithering algorithm to ensure the printability of ghost voxels. The interior voids are iteratively carved by alternating the optimization and dithering. We apply our method to optimize the static and rotational stability, and print various results to evaluate the efficacy. Keywords: Interior carving, Support-free, Voxels dithering, Shape optimization, 3D printing

Perancangan Interior “Interior World Center” di Surabaya

OpenAIRE

Handojo, Renita Olivia

2014-01-01

Interior World Center is a place that contain all needs and matters related to world of interior. The main purpose of Interior World Center is to give access and facilitate people in fulfill their needs that concern and correspond with interior world, that is to say with combine and integrate several interior activity into one in corporated place. Inside of this building there are several commercial space related with the interior world. The commercial spaces will support each other in order ...

Perancangan Interior Redesain Restoran Bambuden 2 Di Makassar

OpenAIRE

Limewa, Jaquliene Feby

2017-01-01

Chinese restaurant is one of the most popular places in the community. Rebranding interior design Bambuden 2 restaurant in Makassar is an interior design of a restaurant that presents dominant chinese food, by offering a blend of Oriental character & Elegant Nuance by adding Bar within the restaurant in different scope area. The restaurant is designed is one restaurant that is designed for the middle to top, with a system of waiter service or waitress to tables. The planned facilities inc...

Dewatering tailings impoundments : interior drains

International Nuclear Information System (INIS)

Charlie, W.A.; Doehring, D.O.; Durnford, D.S.

1984-01-01

For the design of a new uranium tailings impoundment in the western United States, it was proposed that an interior drainage system be considered to economically and reliably minimize potential short- and long-term environmental impacts. The objectives were to decrease the effective hydraulic head on the clay liner, to dewater and stabilize the tailings, and to increase the amount of water recycled to the mill. In addition, desaturation of the impoundment would induce capillary pressure (negative porewater pressure), further reducing the potential movement of dissolved pollutants. This paper presents saturated and unsaturated seepage principles and reviews the concept, criteria and design of the various interior drainage systems considered

The effect of the configuration and the interior design of a virtual weightless space station on human spatial orientation

Science.gov (United States)

Aoki, Hirofumi; Ohno, Ryuzo; Yamaguchi, Takao

2005-05-01

In a virtual weightless environment, subjects' orientation skills were studied to examine what kind of cognitive errors people make when they moved through the interior space of virtual space stations and what kind of visual information effectively decreases those errors. Subjects wearing a head-mounted display moved from one end to the other end in space station-like routes constructed of rectangular and cubical modules, and did Pointing and Modeling tasks. In Experiment 1, configurations of the routes were changed with such variables as the number of bends, the number of embedding planes, and the number of planes with respect to the body posture. The results indicated that spatial orientation ability was relevant to the variables and that orientational errors were explained by two causes. One of these was that the place, the direction, and the sequence of turns were incorrect. The other was that subjects did not recognize the rotation of the frame of reference, especially when they turned in pitch direction rather than in yaw. In Experiment 2, the effect of the interior design was examined by testing three design settings. Wall colors that showed the allocentric frame of reference and the different interior design of vertical and horizontal modules were effective; however, there was a limit to the effectiveness in complicated configurations.

Design and Comparison of a Novel Stator Interior Permanent Magnet Generator for Direct-Drive Wind Turbines

DEFF Research Database (Denmark)

Zhang, Johan Xi; Chen, Zhe; Cheng, M.

2007-01-01

A novel stator interior permanent magnet generator (SIPMG) is presented. A modular stator design is used for convenience in manufacture and maintenance. The generator has the advantages of rugged rotor and concentrated winding design whereas the torque ripple is smaller than that produced...... by a doubly salient machine. Several low-speed multi-pole SIPMGs are designed for direct-drive wind turbines with ratings from 3 to 10 MW. Comparisons between the SIPMG and rotor-surface-mounted permanent magnet synchronous generator (PMSG) show that the SIPMGs have about 120% torque density and 78% cost per...

Use of Computer Simulation in Designing and Evaluating a Proposed Rough Mill for Furniture Interior Parts

Science.gov (United States)

Philip A. Araman

1977-01-01

The design of a rough mill for the production of interior furniture parts is used to illustrate a simulation technique for analyzing and evaluating established and proposed sequential production systems. Distributions representing the real-world random characteristics of lumber, equipment feed speeds and delay times are programmed into the simulation. An example is...

The Effects of Interior Design on Communication and Impressions of a Counselor in a Counseling Room

Science.gov (United States)

Miwa, Yoshiko; Hanyu, Kazunori

2006-01-01

This study aimed to investigate effects of the interior design of a counseling room on participants' self-disclosure and impressions of a counselor. The authors examined the effects of lighting and decorations. It tested four conditions crossing decorations (with or without home-like decorations) and type of lighting (bright or dim). Eighty…

Perwujudan Brand Image Dalam Penataan Interior Rotelli Shoes Di Galaxy Mall

OpenAIRE

Sriti Mayang Sari, Maria Sulistya C

2013-01-01

Nowadays the economic developmentis increasing in Surabaya. This has a positive impact on retail companies in Surabaya. In order to remain competitive shop among many other stores, they need a unique interior design, comfortable and functional that can attract customers to shop. An attractive interior design alone is not enough, however they need an interior design that canreflect the image and strategies.Rotelli is one of the famous shoesbrand from Italy and has a vision to be a trendsetter ...

Evaluation of Standard Concepts Design of Library Interior Physical Environment

Directory of Open Access Journals (Sweden)

Debri Harindya Putri

2018-01-01

Full Text Available Currently the function of a room is not only used as a shelter, the function of the room itself to be increased as a refreshing or relaxation area for users to follow the development of creativity and technology in the field of design. The comfortable factor becomes the main factor that indicates a successful process of creating a space. No exception library. The nature of library seemed stiff because of its function as a place to read, now can be developed and made into more dynamic with the special design concepts or color patterns used. Libraries can be created a special concept that suits the characteristics of the users themselves. Most users of the library, especially in college libraries are teenagers. Naturally, teenagers like to gather with their friends and we have to facilitate this activity in our library design concept. In addition we can also determine the needs of users through research by questionnaire method. The answers of users can be mapped and drawn conclusions. To explore the research, the author reviewed some literature about library interior design and observed the library of Ma Chung University as a case study. The combined results of the method can be concluded and the discovery of ideal standards of physical environment. So, the library can be made as a comfortable reading environment so as to increased interest in reading behavior and the frequent visits of students in the library

Librarians as Interior Designers: The Icing on the Cake (Profile of a Community College LRC: Palomar College).

Science.gov (United States)

Arnsan, Dan

1985-01-01

Describes how staff at Palomar College Library participated in planning the interior of the library building in areas such as designing the floor plans, writing furniture specifications, choosing colors, and making structural changes in the facility. Offers advice for other librarians participating in building projects. (DMM)

A trade-off analysis design tool. Aircraft interior noise-motion/passenger satisfaction model

Science.gov (United States)

Jacobson, I. D.

1977-01-01

A design tool was developed to enhance aircraft passenger satisfaction. The effect of aircraft interior motion and noise on passenger comfort and satisfaction was modelled. Effects of individual aircraft noise sources were accounted for, and the impact of noise on passenger activities and noise levels to safeguard passenger hearing were investigated. The motion noise effect models provide a means for tradeoff analyses between noise and motion variables, and also provide a framework for optimizing noise reduction among noise sources. Data for the models were collected onboard commercial aircraft flights and specially scheduled tests.

The effect of the configuration and the interior design of a virtual weightless space station on human spatial orientation.

Science.gov (United States)

Aoki, Hirofumi; Ohno, Ryuzo; Yamaguchi, Takao

2005-01-01

In a virtual weightless environment, subjects' orientation skills were studied to examine what kind of cognitive errors people make when they moved through the interior space of virtual space stations and what kind of visual information effectively decreases those errors. Subjects wearing a head-mounted display moved from one end to the other end in space station-like routes constructed of rectangular and cubical modules, and did Pointing and Modeling tasks. In Experiment 1, configurations of the routes were changed with such variables as the number of bends, the number of embedding planes, and the number of planes with respect to the body posture. The results indicated that spatial orientation ability was relevant to the variables and that orientational errors were explained by two causes. One of these was that the place, the direction, and the sequence of turns were incorrect. The other was that subjects did not recognize the rotation of the frame of reference, especially when they turned in pitch direction rather than in yaw. In Experiment 2, the effect of the interior design was examined by testing three design settings. Wall colors that showed the allocentric frame of reference and the different interior design of vertical and horizontal modules were effective; however, there was a limit to the effectiveness in complicated configurations. c2005 Published by Elsevier Ltd.

Prescriptive Methodology as a Generative Tool: A Case Study Conducted at Introductory Interior Design Studio Level in the United Arab Emirates

Directory of Open Access Journals (Sweden)

Lina Ahmad

2017-09-01

Full Text Available In the U.A.E. (United Arab Emirates, interior design education is often misunderstood as interior decoration, wherein the former is a more comprehensive design approach to spaces formed by structural boundaries and curation of human interaction. The conducted case study addressed a small number of students enrolled in Interior Design Studio I at Zayed University, Abu Dhabi campus. In addition to traditional teaching methods compromised of individual desk critique sessions, group pin-ups and presentations, three innovative methods were implemented as a means of guiding students through the process: direct sequential instruction executed within an assigned time frame, reflection on the surfaced result and use of flat photography or panoramas as means of space communication. Throughout the three implemented stages of the project, and through utilizing the above-described generative methodology, students achieved complex representation and revealed higher spatial order related to human occupation and space inhabitation. This methodology allowed students to channel their work through complex sets of interconnected information and derived an outcome from an accumulative multi-layered resolution. The article presents the process and analyses the achieved outcomes.

Design Considerations. An Interior Architectural Design Approach to Interiors

Science.gov (United States)

Sawyer, William C.

1971-01-01

The State University Construction Fund, utilizing the nation's top professional talents, must design by contract, within fixed budgets and strict time schedules, quality architecture for 32 campuses in New York State. (Author)

Architecture, landscape architecture and interior- Hons B 2009

CSIR Research Space (South Africa)

Osman, A

2010-03-01

Full Text Available will be as follows: 1. History of Urban Form 2. Urban Renewal and Reactions 3. Urban Order, Security and Power 4. Colonial Impact on Urban From 5. Memory and Conservation 6. Considering the Public and Private Realm 7. Housing and Urban Form ? Type, Poetics 8....e. ?interior design? / ?inte- rior architecture?). Interior design is the reaction to ?found? space and follows three modes of produc- tion: installation, insertion and intervention. Archi- tectural theory pertinent to the discipline?s ontology...

Kajian Estetika Interior Restoran Boncafe Di Jalan Pregolan Surabaya

OpenAIRE

Fanuel W., Yemima

2014-01-01

Boncafe Pregolan restaurant is a restaurant in Surabaya located at Pregolan Street 2, Tegal sari, Central Surabaya. Boncafe Pregolan restaurant built in 2007. The interior of Boncafe Pregolan restaurant is divided into several rooms, main entrance area, main dining area I, main dining area II, smoking dining area, and terrace dining. The aesthetic of interior Boncafe Pregolan restaurant is interesting to be analyzed, because of the interior's plays inside. The design principles implemented t...

Discovering the interior of black holes

Science.gov (United States)

Brustein, Ram; Medved, A. J. M.; Yagi, K.

2017-12-01

The detection of gravitational waves (GWs) from black hole (BH) mergers provides an inroad toward probing the interior of astrophysical BHs. The general-relativistic description of the BH interior is that of empty spacetime with a (possibly) singular core. Recently, however, the hypothesis that the BH interior does not exist has been gaining traction, as it provides a means for resolving the BH information-loss problem. Here, we propose a simple method for answering the following question: Does the BH interior exist and, if so, does it contain some distribution of matter or is it mostly empty? Our proposal is premised on the idea that, similar to the case of relativistic, ultracompact stars, any BH-like object whose interior has some matter distribution should support fluid modes in addition to the conventional spacetime modes. In particular, the Coriolis-induced Rossby (r-) modes, whose spectrum is mostly insensitive to the composition of the interior matter, should be a universal feature of such BH-like objects. In fact, the frequency and damping time of these modes are determined by only the object's mass and speed of rotation. The r-modes oscillate at a lower frequency, decay at a slower rate, and produce weaker GWs than do the spacetime modes. Hence, they imprint a model-insensitive signature of a nonempty interior in the GW spectrum resulting from a BH merger. We find that future GW detectors, such as Advanced LIGO with its design sensitivity, have the potential of detecting such r-modes if the amount of GWs leaking out quantum mechanically from the interior of a BH-like object is sufficiently large.

Designing Mission Operations for the Gravity Recovery and Interior Laboratory Mission

Science.gov (United States)

Havens, Glen G.; Beerer, Joseph G.

2012-01-01

NASA's Gravity Recovery and Interior Laboratory (GRAIL) mission, to understand the internal structure and thermal evolution of the Moon, offered unique challenges to mission operations. From launch through end of mission, the twin GRAIL orbiters had to be operated in parallel. The journey to the Moon and into the low science orbit involved numerous maneuvers, planned on tight timelines, to ultimately place the orbiters into the required formation-flying configuration necessary. The baseline GRAIL mission is short, only 9 months in duration, but progressed quickly through seven very unique mission phases. Compressed into this short mission timeline, operations activities and maneuvers for both orbiters had to be planned and coordinated carefully. To prepare for these challenges, development of the GRAIL Mission Operations System began in 2008. Based on high heritage multi-mission operations developed by NASA's Jet Propulsion Laboratory and Lockheed Martin, the GRAIL mission operations system was adapted to meet the unique challenges posed by the GRAIL mission design. This paper describes GRAIL's system engineering development process for defining GRAIL's operations scenarios and generating requirements, tracing the evolution from operations concept through final design, implementation, and validation.

Penerapan Tipografi dalam Sistem Signage pada Interior Ruang Publik

Directory of Open Access Journals (Sweden)

Ulli Aulia Ruki

2014-10-01

Full Text Available Signage system is applied in interior public spaces with consideration to the basic of typography. The objective of signage system is to provide the user convenience in public spaces in order to reach destination while the user is in the building. The basic requirements for designing signage system are legibility and readability. There are still designers who are not aware about the importance of designing a signage system so that sometimes it is found only as decorative element. It is necessary to make the best use of the purpose of signage design, so an interior design should be more carefully in conducting research related to the application of signage system in public spaces. The applied typography has to be considered by its size, placement, colors, and materials to be used. This research used design thinking goal grid method that is suitable to examine the signage system in order to complete design objectives. Article focuses on how to design the signage system to accommodate information that was useful for the user in public space. At the end, there would be identified signage system’s function in interior public spaces as information, guidance, identification as well as safety regulation. 

Study on Optimum Design of Multi-Pole Interior Permanent Magnet Motor with Concentrated Windings

Science.gov (United States)

Kano, Yoshiaki; Kosaka, Takashi; Matsui, Nobuyuki

Interior Permanent Magnet Synchronous Motors (IPMSM) have been found in many applications because of their high-power density and high-efficiency. The existence of a complex magnetic circuit, however, makes the design of this machine quite complicated. Although FEM is commonly used in the IPMSM design, one of disadvantages is long CPU times. This paper presents a simple non-linear magnetic analysis for a multi-pole IPMSM as a preliminary design tool of FEM. The proposed analysis consists of the geometric-flux-tube-based equivalent-magnetic-circuit model. The model includes saturable permeances taking into account the local magnetic saturation in the core. As a result, the proposed analysis is capable of calculating the flux distribution and the torque characteristics in the presence of magnetic saturation. The effectiveness of the proposed analysis is verified by comparing with FEM in terms of the analytical accuracy and the computation time for two IPMSMs with different specifications. After verification, the proposed analysis-based optimum design is examined, by which the minimization of motor volume is realized while satisfying the necessary maximum torque for target applications.

Interior design of a two-dimensional semiclassical black hole

Science.gov (United States)

Levanony, Dana; Ori, Amos

2009-10-01

We look into the inner structure of a two-dimensional dilatonic evaporating black hole. We establish and employ the homogenous approximation for the black-hole interior. Two kinds of spacelike singularities are found inside the black hole, and their structure is investigated. We also study the evolution of spacetime from the horizon to the singularity.

Interior design of a two-dimensional semiclassical black hole

International Nuclear Information System (INIS)

Levanony, Dana; Ori, Amos

2009-01-01

We look into the inner structure of a two-dimensional dilatonic evaporating black hole. We establish and employ the homogenous approximation for the black-hole interior. Two kinds of spacelike singularities are found inside the black hole, and their structure is investigated. We also study the evolution of spacetime from the horizon to the singularity.

Designing fire safe interiors.

Science.gov (United States)

Belles, D W

1992-01-01

Any product that causes a fire to grow large is deficient in fire safety performance. A large fire in any building represents a serious hazard. Multiple-death fires almost always are linked to fires that grow quickly to a large size. Interior finishes have large, continuous surfaces over which fire can spread. They are regulated to slow initial fire growth, and must be qualified for use on the basis of fire tests. To obtain meaningful results, specimens must be representative of actual installation. Variables--such as the substrate, the adhesive, and product thickness and density--can affect product performance. The tunnel test may not adequately evaluate some products, such as foam plastics or textile wall coverings, thermoplastic materials, or materials of minimal mass. Where questions exist, products should be evaluated on a full-scale basis. Curtains and draperies are examples of products that ignite easily and spread flames readily. The present method for testing curtains and draperies evaluates one fabric at a time. Although a fabric tested alone may perform well, fabrics that meet test standards individually sometimes perform poorly when tested in combination. Contents and furnishings constitute the major fuels in many fires. Contents may involve paper products and other lightweight materials that are easily ignited and capable of fast fire growth. Similarly, a small source may ignite many items of furniture that are capable of sustained fire growth. Upholstered furniture can reach peak burning rates in less than 5 minutes. Furnishings have been associated with many multiple-death fires.(ABSTRACT TRUNCATED AT 250 WORDS)

Vibrant Interior Reflects Lifestyle. 1974 Award Winning Architecture

Science.gov (United States)

American School and University, 1974

1974-01-01

The design of the student center at Essex Community College in Baltimore County, Maryland, reflects youthful lifestyles in the interior decor while providing exterior design to harmonize with existing campus buildings. (Author/MF)

Design and Optimization of Tube Type Interior Permanent Magnets Generator for Free Piston Applications

Directory of Open Access Journals (Sweden)

Serdal ARSLAN

2017-05-01

Full Text Available In this study a design and optimization of a generator to be used in free piston applications was made. In order to supply required initial force, an IPM (interior permanent magnets cavity tube type linear generator was selected. By using analytical equations’ basic dimensioning of generator was made. By using Ansys-Maxwell dimensioning, analysis and optimization of the generator was realized. Also, the effects of design basic variables (pole step ratio, cavity step ratio, inner diameter - outer diameter ratio, primary final length, air interval on pinking force were examined by using parametric analyses. Among these variables, cavity step ratio, inner diameter - outer diameter ratio, primary final length were optimally determined by algorithm and sequential nonlinear programming. The two methods were compared in terms of pinking force calculation problem. Preliminary application of the linear generator was performed for free piston application.

A Primary Study on the Recording Method of Interior Decoration in Qing Dynasty - A Case Study of Interior Decoration of Jingfu Palace

Science.gov (United States)

Rong, X.; He, B.; Zhuang, L.

2017-08-01

The existing interior decoration of Qing Dynasty is the master of that of each dynasty, with its diversified forms and complicated functions. As early as 1920s, the Rehabilitation Committee of Qing court recorded the interior furnishing in the Forbidden City by using Chinese traditional documentary method. Today, along with the constantly updated techniques, the recording method for the current situation of interior decoration has gradually developed from two-dimensional drawings into digital and comprehensive record. However, the current research results are mostly limited to a single field. This paper takes the digital record and reproduction about the current situation of interior decoration in Jingfu Palace in the Forbidden City as an example. Through the use of photogrammetry, 3D laser scanning, virtual display and other technology and equipment at the forefront of architectural field, it makes qualitative and quantitative record about the interior decoration inside Jingfu Palace. By combing with the interpretation of historical documents, it restores the original design ideas hidden behind the current situation of interior decoration, so as to summarize the best recording and reproducing method of interior decoration of Qing Dynasty.

Perancangan Interior Pusat Pendidikan Fashion Di Kota Samarinda

OpenAIRE

William, Livia Gabrielle

2016-01-01

Interior Education Center Fashion in Samarinda City aims to find education center of fashion that can complete student's facilities, finding educational center of fashion that produces interior design educational, informative, and presentative, find educational center of fashion which can show elements of Indonesian culture, discover fashion education center that can attract people in Samarinda. The expected benefits of this research is for the public forum for people who have become fashion ...

Bridging the Field Trip Gap: Integrating Web-Based Video as a Teaching and Learning Partner in Interior Design Education

Science.gov (United States)

Roehl, Amy

2013-01-01

This study utilizes web-based video as a strategy to transfer knowledge about the interior design industry in a format that interests the current generation of students. The model of instruction developed is based upon online video as an engaging, economical, and time-saving alternative to a field trip, guest speaker, or video teleconference.…

Improved interior wall detection using designated dictionaries in compressive urban sensing problems

Science.gov (United States)

Lagunas, Eva; Amin, Moeness G.; Ahmad, Fauzia; Nájar, Montse

2013-05-01

In this paper, we address sparsity-based imaging of building interior structures for through-the-wall radar imaging and urban sensing applications. The proposed approach utilizes information about common building construction practices to form an appropriate sparse representation of the building layout. With a ground based SAR system, and considering that interior walls are either parallel or perpendicular to the exterior walls, the antenna at each position would receive reflections from the walls parallel to the radar's scan direction as well as from the corners between two meeting walls. We propose a two-step approach for wall detection and localization. In the first step, a dictionary of possible wall locations is used to recover the positions of both interior and exterior walls that are parallel to the scan direction. A follow-on step uses a dictionary of possible corner reflectors to locate wall-wall junctions along the detected wall segments, thereby determining the true wall extents and detecting walls perpendicular to the scan direction. The utility of the proposed approach is demonstrated using simulated data.

Perancangan Interior Museum Film Indonesia Di Surabaya

OpenAIRE

Limantoro, Lim Renawati

2013-01-01

Surabaya is a city with a thriving cultural variety with a pluralistic society where people in Surabaya is more modern that easy to accept new things that developed in the community. Museum is a public place so that the necessary interior educative and informative and can be used as a sports-themed Indonesian films. The purpose of designing the interior of the film museum in Surabaya this is a venue to preserve Indonesian films and give knowledge to the people of Surabaya on the world of cine...

A Primary Study on the Recording Method of Interior Decoration in Qing Dynasty – A Case Study of Interior Decoration of Jingfu Palace

Directory of Open Access Journals (Sweden)

X. Rong

2017-08-01

Full Text Available The existing interior decoration of Qing Dynasty is the master of that of each dynasty, with its diversified forms and complicated functions. As early as 1920s, the Rehabilitation Committee of Qing court recorded the interior furnishing in the Forbidden City by using Chinese traditional documentary method. Today, along with the constantly updated techniques, the recording method for the current situation of interior decoration has gradually developed from two-dimensional drawings into digital and comprehensive record. However, the current research results are mostly limited to a single field. This paper takes the digital record and reproduction about the current situation of interior decoration in Jingfu Palace in the Forbidden City as an example. Through the use of photogrammetry, 3D laser scanning, virtual display and other technology and equipment at the forefront of architectural field, it makes qualitative and quantitative record about the interior decoration inside Jingfu Palace. By combing with the interpretation of historical documents, it restores the original design ideas hidden behind the current situation of interior decoration, so as to summarize the best recording and reproducing method of interior decoration of Qing Dynasty.

The Neutron Star Interior Composition Explorer (NICER): Design and Development

Science.gov (United States)

Gendreau, Keith C.; Arzoumanian, Zaven; Adkins, Phillip W.; Albert, Cheryl L.; Anders, John F.; Aylward, Andrew T.; Baker, Charles L.; Balsamo, Erin R.; Bamford, William A.; Benegalrao, Suyog S.;

Possibilities to improve the aircraft interior comfort experience.

Science.gov (United States)

Vink, P; Bazley, C; Kamp, I; Blok, M

2012-03-01

Comfort plays an increasingly important role in the interior design of airplanes. Although ample research has been conducted on airplane design technology, only a small amount of public scientific information is available addressing the passenger's opinion. In this study, more than 10,000 internet trip reports and 153 passenger interviews were used to gather opinions about aspects which need to be improved in order to design a more comfortable aircraft interior. The results show clear relationships between comfort and legroom, hygiene, crew attention and seat/personal space. Passengers rate the newer planes significantly better than older ones, indicating that attention to design for comfort has proven effective. The study also shows that rude flight attendants and bad hygiene reduce the comfort experience drastically and that a high comfort rating is related to higher "fly again" values. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Possibilities to improve the aircraft interior comfort experience

NARCIS (Netherlands)

Vink, P.; Bazley, C.; Kamp, I.; Blok, M.

2012-01-01

Comfort plays an increasingly important role in the interior design of airplanes. Although ample research has been conducted on airplane design technology, only a small amount of public scientific information is available addressing the passenger's opinion. In this study, more than 10,000 internet

Interior acoustic cloak

Directory of Open Access Journals (Sweden)

Wael Akl

2014-12-01

Full Text Available Acoustic cloaks have traditionally been intended to externally surround critical objects to render these objects acoustically invisible. However, in this paper, the emphasis is placed on investigating the application of the acoustic cloaks to the interior walls of acoustic cavities in an attempt to minimize the noise levels inside these cavities. In this manner, the acoustic cloaks can serve as a viable and efficient alternative to the conventional passive noise attenuation treatments which are invariably heavy and bulky. The transformation acoustics relationships that govern the operation of this class of interior acoustic cloaks are presented. Physical insights are given to relate these relationships to the reasons behind the effectiveness of the proposed interior acoustic cloaks. Finite element models are presented to demonstrate the characteristics of interior acoustic cloaks used in treating the interior walls of circular and square cavities both in the time and frequency domains. The obtained results emphasize the effectiveness of the proposed interior cloaks in eliminating the reflections of the acoustic waves from the walls of the treated cavities and thereby rendering these cavities acoustically quiet. It is important to note here that the proposed interior acoustic cloaks can find applications in acoustic cavities such as aircraft cabins and auditoriums as well as many other critical applications.

Analytical study of interior noise control by fuselage design techniques on high-speed, propeller-driven aircraft

Science.gov (United States)

Revell, J. D.; Balena, F. J.; Koval, L. R.

1980-01-01

The acoustical treatment mass penalties required to achieve an interior noise level of 80 dBA for high speed, fuel efficient propfan-powered aircraft are determined. The prediction method used is based on theory developed for the outer shell dynamics, and a modified approach for add-on noise control element performance. The present synthesis of these methods is supported by experimental data. Three different sized aircraft are studied, including a widebody, a narrowbody and a business sized aircraft. Noise control penalties are calculated for each aircraft for two kinds of noise control designs: add-on designs, where the outer wall structure cannot be changed, and advanced designs where the outer wall stiffness level and the materials usage can be altered. For the add-on designs, the mass penalties range from 1.7 to 2.4 percent of the takeoff gross weight (TOGW) of the various aircraft, similar to preliminary estimates. Results for advanced designs show significant reductions of the mass penalties. For the advanced aluminum designs the penalties are 1.5% of TOGW, and for an all composite aircraft the penalties range from 0.74 to 1.4% of TOGW.

Benefits and Challenges when Performing Robust Topology Optimization for Interior Acoustic Problems

OpenAIRE

Christiansen, Rasmus Ellebæk; Jensen, Jakob Søndergaard; Lazarov, Boyan Stefanov; Sigmund, Ole

2014-01-01

The objective of this work is to present benets and challenges of using robust topology optimization techniques for minimizing the sound pressure in interior acoustic problems. The focus is on creating designs which maintain high performance under uniform spatial variations. This work takes offset in previous work considering topology optimization for interior acoustic problems, [1]. However in the previous work the robustness of the designs was not considered.

Benefits and Challenges when Performing Robust Topology Optimization for Interior Acoustic Problems

DEFF Research Database (Denmark)

Christiansen, Rasmus Ellebæk; Jensen, Jakob Søndergaard; Lazarov, Boyan Stefanov

The objective of this work is to present benets and challenges of using robust topology optimization techniques for minimizing the sound pressure in interior acoustic problems. The focus is on creating designs which maintain high performance under uniform spatial variations. This work takes offset...... in previous work considering topology optimization for interior acoustic problems, [1]. However in the previous work the robustness of the designs was not considered....

Aircraft Interior Noise Control Using Distributed Piezoelectric Actuators

Science.gov (United States)

Sun, Jian Q.

1996-01-01

Developing a control system that can reduce the noise and structural vibration at the same time is an important task. This talk presents one possible technical approach for accomplishing this task. The target application of the research is for aircraft interior noise control. The emphasis of the present approach is not on control strategies, but rather on the design of actuators for the control system. In the talk, a theory of distributed piezoelectric actuators is introduced. A uniform cylindrical shell is taken as a simplified model of fuselage structures to illustrate the effectiveness of the design theory. The actuators developed are such that they can reduce the tonal structural vibration and interior noise in a wide range of frequencies. Extensive computer simulations have been done to study various aspects of the design theory. Experiments have also been conducted and the test results strongly support the theoretical development.

The evolution of Interior Intrusion Detection Technology at Sandia National Laboratories

International Nuclear Information System (INIS)

Graham, R.H.; Workhoven, R.M.

1987-07-01

Interior Intrusion Detection Technology began at Sandia National Laboratories (SNL) in 1975 as part of the Fixed Facilities Physical Protection Research and Development program sponsored by the US Department of Energy in connection with their nuclear safeguards effort. This paper describes the evolution of Interior Intrusion Detection Technology at Sandia National Laboratories from the beginning of the Interior Sensor Laboratory to the present. This Laboratory was established in 1976 to evaluate commercial interior intrusion sensors and to assist in site-specific intrusion detection system designs. Examples of special test techniques and new test equipment that were developed at the Lab are presented, including the Sandia Intruder Motion Simulator (SIMS), the Sensor and Environment Monitor (SEM), and the Sandia Interior Robot (SIR). We also discuss new sensors and unique sensor combinations developed when commercial sensors were unavailable and the future application of expert systems

A Human Centred Interior Design of a Habitat Module for the International Space Station

Science.gov (United States)

Burattini, C.

Since the very beginning of Space exploration, the interiors of a space habitat had to meet technological and functional requirements. Space habitats have now to meet completely different requirements related to comfort or at least to liveable environments. In order to reduce psychological drawbacks afflicting the crew during long periods of isolation in an extreme environment, one of the most important criteria is to assure high habitability levels. As a result of the Transhab project cancellation, the International Space Station (ISS) is actually made up of several research laboratories, but it has only one module for housing. This is suitable for short-term missions; middle ­ long stays require new solutions in terms of public and private spaces, as well as personal compartments. A design concept of a module appositely fit for living during middle-long stays aims to provide ISS with a place capable to satisfy habitability requirements. This paper reviews existing Space habitats and crew needs in a confined and extreme environment. The paper then describes the design of a new and human centred approach to habitation module typologies.

Effect of area on color harmony in interior spaces

OpenAIRE

Odabaşıoğlu, Seden

2015-01-01

Cataloged from PDF version of article. Thesis (Ph.D.): Bilkent University, Department of Interior Architecture and Environmental Design, İhsan Doğramacı Bilkent University, 2015. Includes bibliographical references (leaves 142-152). The main aim of this study is to examine the effect of area on color harmony in interior spaces. Area in color harmony is the relative amount of different color areas represented as a proportion on which color harmony depends. Colors in the color ...

Semantic feature extraction for interior environment understanding and retrieval

Science.gov (United States)

Lei, Zhibin; Liang, Yufeng

1998-12-01

In this paper, we propose a novel system of semantic feature extraction and retrieval for interior design and decoration application. The system, V2ID(Virtual Visual Interior Design), uses colored texture and spatial edge layout to obtain simple information about global room environment. We address the domain-specific segmentation problem in our application and present techniques for obtaining semantic features from a room environment. We also discuss heuristics for making use of these features (color, texture, edge layout, and shape), to retrieve objects from an existing database. The final resynthesized room environment, with the original scene and objects from the database, is created for the purpose of animation and virtual walk-through.

Effects of coloured lighting on the perception of interior spaces.

Science.gov (United States)

Odabaşioğlu, Seden; Olguntürk, Nіlgün

2015-02-01

Use of coloured lighting in interior spaces has become prevalent in recent years. Considerable importance is ascribed to coloured lighting in interior and lighting design. The effects of colour on the perception of interior spaces have been studied as surface colour; but here, the effects of three different types of chromatic light were investigated. The lighting differed in colour (red, green and white) and perceptions of interior space were assessed. 97 participants (59 women, 38 men; M age = 21.4 yr.) evaluated the experiment room on a questionnaire assessing eight evaluative factors: Pleasantness, Arousal, Aesthetics, Usefulness, Comfort, Spaciousness, Colour, and Lighting quality. Perceptions of the room differed by colour of lighting for some of the evaluative factors, but there was no sex difference in perceptions. Interior spaces may be perceived as equally pleasant under white, green and red lighting. Under white lighting a space is perceived as more useful, spacious, clear, and luminous. Green lighting would make the same effect. Green and white lighting were perceived equally comfortable in an interior space. Chromatic coloured lighting was perceived to be more aesthetic than white lighting. The results support previous findings for some evaluative factors, but differed for others.

SYSTEMS OF INTERIOR STYLING AND TRAINING OF SPECIALISTS

Directory of Open Access Journals (Sweden)

samatdinov Marat Orynbaevich

2016-09-01

Full Text Available Increasing the quality of construction works and heat insulation efficiency of building envelope as well as providing additional fire proof and acoustic comfort suppose the use of special construction systems provided with the whole complex of components — composite construction systems. Composite interior systems include structural solutions of dividing walls, floors, suspended ceilings, inner facing of walls and fireproof facing, as well as assembling technology of these constructions. The main components of interior composite systems are gypsum board and gypsum-fiber sheets, gypsum-containing dry mortars. Less often gypsum partition blocks or panels based on Portland cement are used (cement fibrolite plates, aquapanels, etc.. The companies producing these materials are usually the movers of the creation of complex systems of interior facing. The systems are developed by leading Russian design organizations or engineering services of companies-the movers.

The Homogeneous Interior-Point Algorithm: Nonsymmetric Cones, Warmstarting, and Applications

DEFF Research Database (Denmark)

Skajaa, Anders

algorithms for these problems is still limited. The goal of this thesis is to investigate and shed light on two computational aspects of homogeneous interior-point algorithms for convex conic optimization: The first part studies the possibility of devising a homogeneous interior-point method aimed at solving...... problems involving constraints that require nonsymmetric cones in their formulation. The second part studies the possibility of warmstarting the homogeneous interior-point algorithm for conic problems. The main outcome of the first part is the introduction of a completely new homogeneous interior......-point algorithm designed to solve nonsymmetric convex conic optimization problems. The algorithm is presented in detail and then analyzed. We prove its convergence and complexity. From a theoretical viewpoint, it is fully competitive with other algorithms and from a practical viewpoint, we show that it holds lots...

The evolution of interior intrusion detection technology at Sandia National Laboratories

International Nuclear Information System (INIS)

Graham, R.H.; Workhoven, R.M.

1987-07-01

Interior Intrusion Detection Technology began at Sandia National Laboratories (SNL) in 1975 as part of the Fixed Facilities Physical Protection Research and Development program sponsored by the US Department of Energy in connection with their nuclear safeguards effort. This paper describes the evolution of Interior Intrusion Detection Technology at Sandia National Laboratories from the beginning of the Interior Sensor Laboratory to the present. This Laboratory was established in 1976 to evaluate commercial interior intrusion sensors and to assist in site-specific intrusion detection system designs. Examples of special test techniques and new test equipment that were developed at the Lab are presented, including the Sandia Intruder Motion Simulator (SIMS), the Sensor and Environment Monitor (SEM), and the Sandia Interior Robot (SIR). We also discuss new sensors and unique sensor combination developed when commercial sensors were unavailable and the future application of expert systems. 5 refs

The evolution of interior intrusion detection technology at Sandia National Laboratories

International Nuclear Information System (INIS)

Graham, R.H.; Workhoven, R.M.

1987-01-01

Interior Intrusion Detection Technology began at Sandia National Laboratories (SNL) in 1975 as part of the Fixed Facilities Physical Protection Research and Development program sponsored by the U.S. Department of Energy in connection with their nuclear safeguards effort. This paper describes the evolution of Interior Intrusion Detection Technology at Sandia National Laboratories from the beginning of the Interior Sensor Laboratory to the present. This Laboratory was established in 1976 to evaluate commercial interior intrusion sensors and to assist in site-specific intrusion detection system designs. Examples of special test techniques and new test equipment that were developed at the Lab are presented, including the Sandia Intruder Motion Simulator (SIMS), the Sensor and Environment Monitor (SEM), and the Sandia Interior Robot (SIR). The authors also discuss new sensors and unique sensor combinations developed when commercial sensors were unavailable and the future application of expert systems

Crane cabins' interior space multivariate anthropometric modeling.

Science.gov (United States)

Essdai, Ahmed; Spasojević Brkić, Vesna K; Golubović, Tamara; Brkić, Aleksandar; Popović, Vladimir

2018-01-01

Previous research has shown that today's crane cabins fail to meet the needs of a large proportion of operators. Performance and financial losses and effects on safety should not be overlooked as well. The first aim of this survey is to model the crane cabin interior space using up-to-date crane operator anthropometric data and to compare the multivariate and univariate method anthropometric models. The second aim of the paper is to define the crane cabin interior space dimensions that enable anthropometric convenience. To facilitate the cabin design, the anthropometric dimensions of 64 crane operators in the first sample and 19 more in the second sample were collected in Serbia. The multivariate anthropometric models, spanning 95% of the population on the basis of a set of 8 anthropometric dimensions, have been developed. The percentile method was also used on the same set of data. The dimensions of the interior space, necessary for the accommodation of the crane operator, are 1174×1080×1865 mm. The percentiles results for the 5th and 95th model are within the obtained dimensions. The results of this study may prove useful to crane cabin designers in eliminating anthropometric inconsistencies and improving the health of operators, but can also aid in improving the safety, performance and financial results of the companies where crane cabins operate.

Realization of FRC interior and exterior furniture

Science.gov (United States)

Šonka, Š.; Frantová, M.; Štemberk, P.; Havrda, J.; Janouch, P.

2017-09-01

This article deals with the implementation of fibre reinforced concrete for interior and exterior furniture. The use of fibre reinforced concrete for non-traditional and small structures brings some specifics in design and realization. These are, in particular, the design of a suitable mixture, the choice of the shape of the structure in relation to the technological possibilities of realization, the static effects and finally the actual production of the element.

TU-H-BRA-05: A System Design for Integration of An Interior MRI and a Linear Accelerator

Energy Technology Data Exchange (ETDEWEB)

Mao, W [UT Southwestern Medical Center, Dallas, TX (United States); Henry Ford Hospital, Detroit, MI (United States); Wang, G [Rensselaer Polytechnic Instit., Troy, NY (United States)

2016-06-15

Purpose: MRI is a highly desirable modality to guide radiation therapy but it is difficult to combine a conventional MRI scanner directly with a linear accelerator (linac). An interior MRI (iMRI) concept has been proposed to acquire MRI images within a small field of view only covering targets and immediate surrounding tissues. The objective of this project is to design an interior MRI system to work with a linac using a magnet to provide a field around 0.2T in a cube of 20cm per side, and perform image reconstruction with a slightly inhomogeneous static magnetic fields. Methods: All the results are simulated using a commercially available software package, FARADY. In our design, a ring structure holds the iMRI system and also imbeds a linac treatment head. The ring is synchronized to the linac gantry rotation. Half of the ring is made of steel and becomes a magnetic flux return path (yoke) so that a strong magnetic field will be limited inside the iron circuit and fringe fields will be very weak. In order to increase the static magnetic field homogeneity, special steel magnet boots or tips were simulated. Three curved boots were designed based on two-dimensional curves: arc, parabola and hyperbola. Results: Different boot surfaces modify magnetic field distributions differently. With the same pair of neodymium-iron-boron (NdFeB) magnets, the magnetic induction at the centers are 0.217T, 0.201T, 0.204T, and 0.212T for flat, arc, parabola and hyperbola boots, respectively. The hyperbola boots lead to the most homogeneous results, the static magnetic field deviations are within 0.5% in a cube of 20cm, and can be further improved using shimming techniques. Conclusion: This study supports the concept of an iMRI design. Successful development of iMRI will provide crucial information for tumor delineation in radiation therapy.

TU-H-BRA-05: A System Design for Integration of An Interior MRI and a Linear Accelerator

International Nuclear Information System (INIS)

Mao, W; Wang, G

2016-01-01

Purpose: MRI is a highly desirable modality to guide radiation therapy but it is difficult to combine a conventional MRI scanner directly with a linear accelerator (linac). An interior MRI (iMRI) concept has been proposed to acquire MRI images within a small field of view only covering targets and immediate surrounding tissues. The objective of this project is to design an interior MRI system to work with a linac using a magnet to provide a field around 0.2T in a cube of 20cm per side, and perform image reconstruction with a slightly inhomogeneous static magnetic fields. Methods: All the results are simulated using a commercially available software package, FARADY. In our design, a ring structure holds the iMRI system and also imbeds a linac treatment head. The ring is synchronized to the linac gantry rotation. Half of the ring is made of steel and becomes a magnetic flux return path (yoke) so that a strong magnetic field will be limited inside the iron circuit and fringe fields will be very weak. In order to increase the static magnetic field homogeneity, special steel magnet boots or tips were simulated. Three curved boots were designed based on two-dimensional curves: arc, parabola and hyperbola. Results: Different boot surfaces modify magnetic field distributions differently. With the same pair of neodymium-iron-boron (NdFeB) magnets, the magnetic induction at the centers are 0.217T, 0.201T, 0.204T, and 0.212T for flat, arc, parabola and hyperbola boots, respectively. The hyperbola boots lead to the most homogeneous results, the static magnetic field deviations are within 0.5% in a cube of 20cm, and can be further improved using shimming techniques. Conclusion: This study supports the concept of an iMRI design. Successful development of iMRI will provide crucial information for tumor delineation in radiation therapy.

Thematic Interior at the Indischetafel Café As a Media for Forming Bandung Tempo Dulu’s Athmosphere

Directory of Open Access Journals (Sweden)

Tiara Isfiaty

2017-12-01

Full Text Available The interior elements designed in a specific theme are aimed to shape a character, a per- ception, and an atmosphere of spaces. In Bandung, culinary facilities that carry the theme of the old-style interior design of the Dutch East Indies are quite popular. This study aims to contribute guidance in creating the quality of space by applying the selection of decoration and furniture elements (moveable interior elements and the arrangement of walls, floors, and ceilings (unmoveable interior elements. This study applies a case study as a research method and a direct observation of the Indischetafel Café, while the analysis uses a descrip- tive analysis method. This study is to examine aspects of interior element arrangement in the Indischetafel Café in bringing the atmosphere of Bandung Tempo Dulu.   Keywords: thematic interior, interior elements, space atmosphere, Bandung Tempo Dulu

Deep Interior Mission: Imaging the Interior of Near-Earth Asteroids Using Radio Reflection Tomography

Science.gov (United States)

Safaeinili, A.; Asphaug, E.; Belton, M.; Klaasen, K.; Ostro, S.; Plaut, J.; Yeomans, D.

2004-12-01

Near-Earth asteroids are important exploration targets since they provide clues to the evolution of the solar system. They are also of interest since they present a clear danger to Earth in the future. Our mission objective is to image the internal structure of two NEOs using radio reflection tomography (RRT), in order to explore the record of asteroid origin and impact evolution, and to test the fundamental hypothesis that these important members of the solar system are rubble piles rather than consolidated bodies. Our mission's RRT technique is analogous to doing a ``CAT scan" of the asteroid from orbit. Closely sampled radar echoes are processed to yield volumetric maps of mechanical and compositional boundaries, and measure interior material dielectric properties. The RRT instrument is a radar that operates at 5 and 15 MHz with two 30-m (tip-to-tip) dipole antennas that are used in a cross-dipole configuration. The radar transmitter and receiver electronics have heritage from JPL's MARSIS contribution to Mars Express, and the antenna is similar to systems used in IMAGE and LACE missions. The 5-MHz channel is designed to penetrate >1 km of basaltic rock, and 15-MHz penetrates a few hundred meters or more. In addition to RRT volumetric imaging, we use a redundant color cameras to explore the surface expressions of unit boundaries, in order to relate interior radar imaging to what is observable from spacecraft imaging and from Earth. The camera also yields stereo color imaging for geology and RRT-related compositional analysis. Gravity and high fidelity geodesy are used to explore how interior structure is expressed in shape, density, mass distribution and spin. Deep interior has two targets (S-type 1999 ND43 and V-type Nyx ) whose composition bracket the diversity of solar system materials that we are likely to encounter, and are richly complementary.

Pertimbangan Aspek Kejiwaan terhadap Feng Shui dalam Perancangan Interior

OpenAIRE

C. Indrani, Hedy

2003-01-01

The truth of applying feng shui in interior design is always doubted because feng shui is still consider mystically, unlogic, and unusual, therefore it needs facts of this potential feng shui. As knowledge, feng shui psychologically plays important role for home design that it increases psychological life of the residents.

Interior Architectural Requirements for Electronic Circuits and its Applications Research Laboratory

International Nuclear Information System (INIS)

ElDib, A.A.

2014-01-01

This paper discusses the pivotal role of the Interior Architecture As one of the scientific disciplines minute to complete the Architectural Sciences, which relied upon the achievement and development of facilities containing scientific research laboratories, in terms of planning and design, particularly those containing biological laboratories using radioactive materials, adding to that, the application of the materials or raw materials commensurate with each discipline of laboratory and its work nature, and by the discussion the processing of design techniques and requirements of interior architecture dealing with Research Laboratory for electronic circuits and their applications with the making of its prototypes

Constraint-aware interior layout exploration for pre-cast concrete-based buildings

KAUST Repository

Liu, Han; Yang, Yongliang; AlHalawani, Sawsan; Mitra, Niloy J.

2013-01-01

Creating desirable layouts of building interiors is a complex task as designers have to manually adhere to various local and global considerations arising from competing practical and design considerations. In this work, we present an interactive

Interior Noise Predictions in the Preliminary Design of the Large Civil Tiltrotor (LCTR2)

Science.gov (United States)

Grosveld, Ferdinand W.; Cabell, Randolph H.; Boyd, David D.

2013-01-01

A prediction scheme was established to compute sound pressure levels in the interior of a simplified cabin model of the second generation Large Civil Tiltrotor (LCTR2) during cruise conditions, while being excited by turbulent boundary layer flow over the fuselage, or by tiltrotor blade loading and thickness noise. Finite element models of the cabin structure, interior acoustic space, and acoustically absorbent (poro-elastic) materials in the fuselage were generated and combined into a coupled structural-acoustic model. Fluctuating power spectral densities were computed according to the Efimtsov turbulent boundary layer excitation model. Noise associated with the tiltrotor blades was predicted in the time domain as fluctuating surface pressures and converted to power spectral densities at the fuselage skin finite element nodes. A hybrid finite element (FE) approach was used to compute the low frequency acoustic cabin response over the frequency range 6-141 Hz with a 1 Hz bandwidth, and the Statistical Energy Analysis (SEA) approach was used to predict the interior noise for the 125-8000 Hz one-third octave bands.

Features interior design offices

OpenAIRE

Novikov, A. S.; National Aviation University, Ukraine

2014-01-01

The article examines the laws and the formation of office space inthe current conditions and investigate the application of the latest technical tools aesthetics to improve the quality of design solutions.

A simplified model of dynamic interior cooling load evaluation for office buildings

International Nuclear Information System (INIS)

Ding, Yan; Zhang, Qiang; Wang, Zhaoxia; Liu, Min; He, Qing

2016-01-01

Highlights: • The core interior disturbance was determined by principle component analysis. • Influences of occupants on cooling load should be described using time series. • A simplified model was built to evaluate dynamic interior building cooling load. - Abstract: Predicted cooling load is a valuable tool for assessing the operation of air-conditioning systems. Compared with exterior cooling load, interior cooling load is more unpredictable. According to principle components analysis, occupancy was proved to be a typical factor influencing interior cooling loads in buildings. By exploring the regularity of interior disturbances in an office building, a simplified evaluation model for interior cooling load was established in this paper. The stochastic occupancy rate was represented by a Markov transition model. Equipment power, lighting power and fresh air were all related to occupancy rate based on time sequence. The superposition of different types of interior cooling loads was also considered in the evaluation model. The error between the evaluation results and measurement results was found to be lower than 10%. In reference to the cooling loads calculated by the traditional design method and area-based method in case study office rooms, the evaluated cooling loads were suitable for operation regulation.

The Danish School of Interior Architecture: A Visionary Functionalist, a Visionary Aesthete, and their Women Students

DEFF Research Database (Denmark)

Lytken, Malene

2013-01-01

Recently there has been a growing international interest in the history of interior design. Danish design owes much of its international renown to a few prominent architects and their iconic products. One of them was Finn Juhl, who earned an international reputation mainly through his elegant...... furniture design. However, an important aspect of his work has received virtually no attention: his seminal work as a visionary teacher and leader at the school for professional interior design in Copenhagen in the 1940s and 1950s. Harald Willerup, architect as well, and Juhl's equally visionary predecessor......, had initiated this work in 1934, but has remained largely unknown. This article offers a historiographical mapping of the professional education of Danish interior designers in the period from 1934 to 1955—a subject, which has so far remained unexposed. Despite the fact that the leading figures...

Perancangan Interior Nestlé's Cereal World Di Surabaya

OpenAIRE

Mariana Wibowo, Linda Gunawan

2014-01-01

Nestlé's Cereal World is a new facility in foodservice industry, which people can explore and obtain a new experience about cereal through 4 main facilities: attraction, discover, dining, and shopping. Nestlé's Cereal World design will use Nestlé's interior branding, which the tangible and intangible design will represent the Nestlé's Cereal identity.

Interior Pathways to Dissipation of Mesoscale Energy

Energy Technology Data Exchange (ETDEWEB)

Nadiga, Balasubramanya T. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2018-01-27

This talk at Goethe University asks What Powers Overturning Circulation? How does Ocean Circulation Equilibrate? There is a HUGE reservoir of energy sitting in the interior ocean. Can fluid dynamic instabilities contribute to the mixing required to drive global overturning circulation? Study designed to eliminate distinguished horizontal surfaces such as bottom BL and surface layer

Design Development of a Combined Deployment and Pointing System for the International Space Station Neutron Star Interior Composition Explorer Telescope

Science.gov (United States)

Budinoff, Jason; Gendreau, Keith; Arzoumanian, Zaven; Baker, Charles; Berning, Robert; Colangelo, TOdd; Holzinger, John; Lewis, Jesse; Liu, Alice; Mitchell, Alissa;

Shape interior modeling and mass property optimization using ray-reps

DEFF Research Database (Denmark)

Wu, Jun; Kramer, Lou; Westermann, Rüdiger

2016-01-01

, and prove this parametrization covers the optimal interior regarding static and rotational stability criteria. This compact formulation thoroughly reduces the number of design variables compared to the general volumetric element-wise formulation. We demonstrate the effectiveness of our reduced formulation......We present a novel method for the modeling and optimization of the material distribution inside 3D shapes, such that their 3D printed replicas satisfy prescribed constraints regarding mass properties. In particular, we introduce an extension of ray-representation to shape interior modeling...

Learning through Nomadic Interiors - Villa Rotonda through the lenses of Heterotopia

DEFF Research Database (Denmark)

Hvejsel, Marie Frier; Fisker, Anna Marie

2015-01-01

in a series of nomadic interiors allowing the students to travel in time and place; from Palladio to the 14th Architectural Biennale and from Vincenza to Venice. In the paper we use Foucaults concept of Heterotopia to analyze how a window in 1:10 from the south façade of Villa Rotonda now re-designed......The question of the critical role of our built heritage to the complex and interdisciplinary processes that govern the current development of the built environment define a continuous challenge in interior studies and education: Can a study of the fundamental interior elements of Villa Rotonda...... of human geography as elaborated by Foucault and apply it on a project developed and exhibited on the 14th International Architecture Biennale in Venice that focused on the current need to develop Urban Farming strategies. Here an interdisciplinary team of students analyzed fundamental interior elements...

Design analysis report for the 244-AR vault Interim Stabilization interior transfer system

International Nuclear Information System (INIS)

CARLSON, A.B.

2002-01-01

The purpose of this calculation note is to verify that the 244-AR Vault Interior Transfer System piping installed in the vault meets ASME B31.3 code requirements. This calculation also evaluates the pipe support loads

Perkembangan Material Rotan dan Penggunaan di Dunia Desain Interior

Directory of Open Access Journals (Sweden)

Grace Hartanti

2012-10-01

Full Text Available For most Indonesia people, rattan had long been known, for personal use and trade.  It started from raw materials and semi-finished trades, and later it was developed  into the finished rattan product trade conducted by the wholesalers in Indonesia. In addition to the processing of rattan in Indonesia, the rattan finished-product trade has also been done widely.The trade agreement that has been made with foreign parties spur the contribution in increasing the state revenue which deserves to be taken into account. In this case, rattan application has grown in the world of Interior Design, for example as furniture and as interior accessories. The use of substitute materials, such as synthetic rattan, is now also widely used to fulfill high demand and product diversity.With the growing numbers of variants of rattan application in interior design field, a research based on qualitative research was applied. Article explores the process of research and rattan is expected to be the mediator in bringing local Indonesian culture to the global world competition. Thus, the state gait could be known more widely, and hopefully could help improving the welfare of Indonesian people into a better place.  

Identifying core habitat and connectivity for focal species in the interior cedar-hemlock forest of North America to complete a conservation area design

Science.gov (United States)

Lance Craighead; Baden Cross

2007-01-01

To identify the remaining areas of the Interior Cedar- Hemlock Forest of North America and prioritize them for conservation planning, the Craighead Environmental Research Institute has developed a 2-scale method for mapping critical habitat utilizing 1) a broad-scale model to identify important regional locations as the basis for a Conservation Area Design (CAD), and 2...

Renovation and design of double casement windows with regard to the occurrence of water vapour condensation or mould on the interior surface of the window jamb

Science.gov (United States)

Kudrnacova, L.; Balik, L.

2017-10-01

The condensation of water vapour on the interior surface is an indicator of construction dysfunction or ignoring of the surroundings temperature and relative humidity. This paper deals with analysis of the occurrence of condensation on the jamb of double casement windows (windows with two window casements). More precisely, this is a surface in the interior where water vapour condensation or mould occur. For the renovation of existing double casement windows, there are different solutions based on window design: application of double insulating glazing on the interior window casement, application of double insulating glazing on the exterior casement, or installation of a simple window. We first describe measurement of an existing double casement window located in a mountain cottage. Second, the results and comparison of 2D thermal model of different types of double casement window construction. Also, the external insulation of the peripheral wall was included in the model.

Interior moisture design loads for residences

Science.gov (United States)

Anton TenWolde; Iain S. Walker

2001-01-01

This paper outlines a methodology to obtain design values for indoor boundary conditions for moisture design calculations for residences. This is part of a larger effort by ASHRAE Standard Project Committee 160P, Design Criteria for Moisture Control in Buildings, to formulate criteria for moisture design loads, analysis techniques, and material and building performance...

INTERIORITY

DEFF Research Database (Denmark)

Hvejsel, Marie Frier

Dealing with the general theme of domestic architectural quality, the PhD thesis ‘INTERIORITY’ takes its point of departure in the continuous and increasing need to improve our capability as architects to theoretically articulate the intangible concept of quality, and to reveal it through an active...... been motivated by the particular hypothesis that an introduction of the notion of interiority, as an ability of the spatial envelope itself to address the sensuous scale of furniture, unfolds a particular dual critical potential signifying our experience of domestic architectural quality: On the one......, tectonically. Hence, it has been a particular idea of the study to explore the relation between furniture, the spatial envelope itself, and its construct by using furniture as an architectural concept. Consequently, the thesis has specifically investigated whether this notion of interiority, describing...

Interior noise analysis of a construction equipment cabin based on airborne and structure-borne noise predictions

Energy Technology Data Exchange (ETDEWEB)

Kim, Sung Hee; Hong, Suk Yoon [Seoul National University, Seoul (Korea, Republic of); Song, Jee Hun [Chonnam National University, Gwangju (Korea, Republic of); Joo, Won Ho [Hyundai Heavy Industries Co. Ltd, Ulsan (Korea, Republic of)

2012-04-15

Noise from construction equipment affects not only surrounding residents, but also the operators of the machines. Noise that affects drivers must be evaluated during the preliminary design stage. This paper suggests an interior noise analysis procedure for construction equipment cabins. The analysis procedure, which can be used in the preliminary design stage, was investigated for airborne and structure borne noise. The total interior noise of a cabin was predicted from the airborne noise analysis and structure-borne noise analysis. The analysis procedure consists of four steps: modeling, vibration analysis, acoustic analysis and total interior noise analysis. A mesh model of a cabin for numerical analysis was made at the modeling step. At the vibration analysis step, the mesh model was verified and modal analysis and frequency response analysis are performed. At the acoustic analysis step, the vibration results from the vibration analysis step were used as initial values for radiated noise analysis and noise reduction analysis. Finally, the total cabin interior noise was predicted using the acoustic results from the acoustic analysis step. Each step was applied to a cabin of a middle-sized excavator and verified by comparison with measured data. The cabin interior noise of a middle-sized wheel loader and a large-sized forklift were predicted using the analysis procedure of the four steps and were compared with measured data. The interior noise analysis procedure of construction equipment cabins is expected to be used during the preliminary design stage.

Interior noise analysis of a construction equipment cabin based on airborne and structure-borne noise predictions

International Nuclear Information System (INIS)

Kim, Sung Hee; Hong, Suk Yoon; Song, Jee Hun; Joo, Won Ho

2012-01-01

Noise from construction equipment affects not only surrounding residents, but also the operators of the machines. Noise that affects drivers must be evaluated during the preliminary design stage. This paper suggests an interior noise analysis procedure for construction equipment cabins. The analysis procedure, which can be used in the preliminary design stage, was investigated for airborne and structure borne noise. The total interior noise of a cabin was predicted from the airborne noise analysis and structure-borne noise analysis. The analysis procedure consists of four steps: modeling, vibration analysis, acoustic analysis and total interior noise analysis. A mesh model of a cabin for numerical analysis was made at the modeling step. At the vibration analysis step, the mesh model was verified and modal analysis and frequency response analysis are performed. At the acoustic analysis step, the vibration results from the vibration analysis step were used as initial values for radiated noise analysis and noise reduction analysis. Finally, the total cabin interior noise was predicted using the acoustic results from the acoustic analysis step. Each step was applied to a cabin of a middle-sized excavator and verified by comparison with measured data. The cabin interior noise of a middle-sized wheel loader and a large-sized forklift were predicted using the analysis procedure of the four steps and were compared with measured data. The interior noise analysis procedure of construction equipment cabins is expected to be used during the preliminary design stage

Numerical simulation of interior flow field of nuclear model pump

International Nuclear Information System (INIS)

Wang Chunlin; Peng Na; Kang Can; Zhao Baitong; Zhang Hao

2009-01-01

Reynolds time-averaged N-S equations and the standard k-ε turbulent model were adopted, and three-dimensional non-structural of tetrahedral mesh division was used for modeling. Multiple reference frame model of rotating fluid mechanical model was used, under the design condition, the three-dimensional incompressible turbulent flow of nuclear model pump was simulated, and the results preferably post the characteristics of the interior flow field. This paper first analyzes the total pressure and velocity distribution in the flow field, and then describes the interior flow field characteristics of each part such as the impeller, diffuser and spherical shell, and also discusses the reasons that cause these characteristics. The study results can be used to estimate the performance of nuclear model pump, and will provide some useful references for its hydraulic optimized design. (authors)

Constraint-aware interior layout exploration for pre-cast concrete-based buildings

KAUST Repository

Liu, Han

2013-05-03

Creating desirable layouts of building interiors is a complex task as designers have to manually adhere to various local and global considerations arising from competing practical and design considerations. In this work, we present an interactive design tool to create desirable floorplans by computationally conforming to such design constraints. Specifically, we support three types of constraints: (i) functional constraints such as number of rooms, connectivity among the rooms, target room areas, etc.; (ii) design considerations such as user modifications and preferences, and (iii) fabrication constraints such as cost and convenience of manufacturing. Based on user specifications, our system automatically generates multiple floor layouts with associated 3D geometry that all satisfy the design specifications and constraints, thus exposing only the desirable family of interior layouts to the user. In this work, we focus on pre-cast concrete-based constructions, which lead to interesting discrete and continuous optimization possibilities. We test our framework on a range of complex real-world specifications and demonstrate the control and expressiveness of the exposed design space relieving the users of the task of manually adhering to non-local functional and fabrication constraints. © 2013 Springer-Verlag Berlin Heidelberg.

IAQ performance of interior finishing products and the role of LCA

CSIR Research Space (South Africa)

Ampofo-Anti, N

2010-01-01

Full Text Available of interior finishing products to be more performance-oriented, where performance is defined in terms of the life cycle human health effects 4 . 3.0 LCA – the science-based tool Life Cycle Assessment (LCA) is a science-based tool which is designed... of interior finishing products and the role of LCA Naalamkai Ampofo-Anti, Senior Researcher, CSIR 1.0 Introduction The environmental rating and certification of products is a voluntary, market-based response by industry and business to the consumer’s...

Int-Soft Interior Hyperideals of Ordered Semihypergroups

Directory of Open Access Journals (Sweden)

Asghar Khan

2017-07-01

Full Text Available The main theme of this paper is to study ordered semihypergroups in the context of int-soft interior hyperideals. In this paper, the notion of int-soft interior hyperideals are studied and their related properties are discussed. We present characterizations of interior hyperideals in terms of int-soft interior hyperideals. The concepts of int-soft hyperideals and int-soft interior hyperideals coincide in a regular as well as in intra-regular ordered semihypergroups. We prove that every int-soft hyperideal is an int-soft interior hyperideal but the converse is not true which is shown with help of an example. Furthermore we characterize simple ordered semihypergroups by means of int-soft hyperideals and int-soft interior hyperideals.

Technical Drafting and Mental Visualization in Interior Architecture Education

Science.gov (United States)

Arslan, Ali Riza; Dazkir, Sibel Seda

2017-01-01

We explored how beginning-level interior architecture students develop skills to create mental visualizations of three-dimensional objects and environments, how they develop their technical drawing skills, and whether or not physical and computer generated models aid this design process. We used interviews and observations to collect data. The…

Interior thermal insulation systems for historical building envelopes

Science.gov (United States)

Jerman, Miloš; Solař, Miloš; Černý, Robert

2017-11-01

The design specifics of interior thermal insulation systems applied for historical building envelopes are described. The vapor-tight systems and systems based on capillary thermal insulation materials are taken into account as two basic options differing in building-physical considerations. The possibilities of hygrothermal analysis of renovated historical envelopes including laboratory methods, computer simulation techniques, and in-situ tests are discussed. It is concluded that the application of computational models for hygrothermal assessment of interior thermal insulation systems should always be performed with a particular care. On one hand, they present a very effective tool for both service life assessment and possible planning of subsequent reconstructions. On the other, the hygrothermal analysis of any historical building can involve quite a few potential uncertainties which may affect negatively the accuracy of obtained results.

Critical review of LEED system for rating sustainability of architecture of commercial interiors

Directory of Open Access Journals (Sweden)

Stevanović Sanja

2010-01-01

Full Text Available The LEED rating system for sustainability of architecture has gained large marketing potential in USA and became one of main ways American builders are attacking ecological challenges. In this paper the LEED rating system for commercial interiors is critically reviewed, pointing out its positive - focus on integrated design process - and negative impacts - low thresholds for highest ratings and tendency to gain LEED rating with projects that hardly pass the thresholds, largely neglecting the principles of energy efficiency. Based on a few prominent LEED platinum examples, the beginnings of a LEED style of designing interiors in historical landmark buildings are pointed out as well.

Research plan for lands administered by the U.S. Department of the Interior in the Interior Columbia Basin and Snake River Plateau

Science.gov (United States)

Beever, Erik A.; Pyke, David A.

2002-01-01

This document presents a long-term research strategy designed to address current and future research needs for management of Department of the Interior-administered ecosystems in the Intermountain West. Although the research plan was developed in the context of the Interior Columbia Basin Ecosystem Management Project, the plan addresses many high-priority issues facing land managers throughout the Intermountain West. These issues pose management challenges that may be addressed with applied research both currently and in upcoming decades. Possessing a particular focus on semiarid ecosystems, the plan is a collection of research questions under five categories of research emphases: 1) restoration; 2) rangeland health; 3) aquatic-terrestrial connections; 4) development of monitoring and evaluation protocols; and 5) species and habitats at risk.

Hiding the interior region of core-shell nanoparticles with quantum invisible cloaks

Science.gov (United States)

Lee, Jeng Yi; Lee, Ray-Kuang

2014-04-01

Based on the scattering cancellation, we provide a method not only making a nanoparticle nearly invisible, but also hiding its interior region from the outside probing matter wave. By applying the interplay among the nodal points of partial waves along with the concept of streamline in fluid dynamics for probability flux, a quantum invisible cloak to the electron transport in a host semiconductor is demonstrated by simultaneously guiding the probability flux outside a hidden region and keeping the total scattering cross section negligible. As the probability flux vanishes in the interior region, one can embed any materials inside a multiple core-shell nanoparticle without affecting physical observables from the outside. Our results reveal the possibility to design a protection shield layer for fragile interior parts from the impact of transport electrons.

Evaluation of Standard Concepts Design of Library Interior Physical Environment (Case Study at University of Ma Chung

Directory of Open Access Journals (Sweden)

Debri Haryndia Putri

2016-12-01

Full Text Available Currently the function of a room is not only used as a shelter, the function of the room itself to be increased as a refreshing or relaxation area for users to follow the development of creativity and technology in the field of design. The comfortable factor becomes the main factor that indicates a successful process of creating a space. No exception library. The nature of library seemed stiff because of its function as a place to read, now can be developed and made into more dynamic with the special design concepts or color patterns used. Libraries can be created a special concept that suits the characteristics of the users themselves. Most users of the library, especially in college libraries are teenagers. Naturally, teenagers like to gather with their friends and we have to facilitate this activity in our library design concept. In addition we can also determine the needs of users through research by questionnaire method. The answers of users can be mapped and drawn conclusions. To explore the research, the author reviewed some literature about library interior design and observed the library of Ma Chung University as a case study. The combined results of the method can be concluded and the discovery of ideal standards of physical environment. So, the library can be made as a comfortable reading environment so as to increased interest in reading behavior and the frequent visits of students in the library.

Occupational therapists' perceptions about the clinical utility of the 3D interior design software.

Science.gov (United States)

Atwa, Anita; Money, Arthur G; Spiliotopoulou, Georgia; Mcintyre, Anne

2013-07-01

The 3D interior design software (3DIDS) is a technology, which primarily allows users to simulate their homes and visualize any changes prior to implementing them. This feasibility study aimed to examine occupational therapists' perceptions about the clinical utility of the 3DIDS. A secondary aim was to explore the attitudes of occupational therapists towards technology in general. Three focus groups were conducted with 25 occupational therapists working with older people in the UK. The qualitative data were analysed using inductive thematic analysis. The three main themes that were identified were usage and attitudes of technology, opportunities for realistic application of the 3DIDS and related threats and benefits for the occupational therapy profession. Occupational therapists had a positive attitude towards technology. They suggested that the 3DIDS could be used in discharge planning and in rehabilitation. They viewed it as a tool that could enhance their status within the health care profession and improve communication, but not as a tool that should replace the role of the occupational therapist. This research offers new and important findings about the utilization of the 3DIDS by occupational therapists and provides information as to where this technology should be trialled.

49 CFR 229.206 - Design requirements.

Science.gov (United States)

2010-10-01

...-climber, emergency egress, emergency interior lighting, and interior configuration design requirements set... 49 Transportation 4 2010-10-01 2010-10-01 false Design requirements. 229.206 Section 229.206..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Crashworthiness Design...

Control of interior surface materials for speech privacy in high-speed train cabins.

Science.gov (United States)

Jang, H S; Lim, H; Jeon, J Y

2017-05-01

The effect of interior materials with various absorption coefficients on speech privacy was investigated in a 1:10 scale model of one high-speed train cabin geometry. The speech transmission index (STI) and privacy distance (r P ) were measured in the train cabin to quantify speech privacy. Measurement cases were selected for the ceiling, sidewall, and front and back walls and were classified as high-, medium- and low-absorption coefficient cases. Interior materials with high absorption coefficients yielded a low r P , and the ceiling had the largest impact on both the STI and r P among the interior elements. Combinations of the three cases were measured, and the maximum reduction in r P by the absorptive surfaces was 2.4 m, which exceeds the space between two rows of chairs in the high-speed train. Additionally, the contribution of the interior elements to speech privacy was analyzed using recorded impulse responses and a multiple regression model for r P using the equivalent absorption area. The analysis confirmed that the ceiling was the most important interior element for improving speech privacy. These results can be used to find the relative decrease in r P in the acoustic design of interior materials to improve speech privacy in train cabins. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

An Evaluation of Automotive Interior Packages Based on Human Ocular and Joint Motor Properties

Science.gov (United States)

Tanaka, Yoshiyuki; Rakumatsu, Takeshi; Horiue, Masayoshi; Miyazaki, Tooru; Nishikawa, Kazuo; Nouzawa, Takahide; Tsuji, Toshio

This paper proposes a new evaluation method of an automotive interior package based on human oculomotor and joint-motor properties. Assuming the long-term driving situation in the express high way, the three evaluation indices were designed on i) the ratio of head motion at gazing the driving items; ii) the load torque for maintaining the standard driving posture; and iii) the human force manipulability at the end-point of human extremities. Experiments were carried out for two different interior packages with four subjects who have the special knowledge on the automobile development. Evaluation results demonstrate that the proposed method can quantitatively analyze the driving interior in good agreement with the generally accepted subjective opinion in the automobile industry.

Sound Quality Evaluation and Optimization for Interior Noise of Rail Vehicle

Directory of Open Access Journals (Sweden)

Kai Hu

2014-08-01

Full Text Available A procedure for sound filed simulation, sound quality (SQ evaluation, and optimization of interior noise of a rail vehicle is investigated in this paper. Firstly, some interior noises are measured on site when the subway is running in tunnel at a speed of 60 km/h. The sound pressure levels (SPLs, loudness, sharpness, and roughness of the measured noise are analyzed. A finite element model for acoustical simulation of the carriage is established by using the Actran software. The accuracy and feasibility of the finite model are verified by comparing the psychoacoustical parameters from the simulations and measurements. By using orthogonal experimental design, finally, the best optimization scheme is put forward, which obtained a sound quality improvement with a 4.81 dB decrease in SPL and a 1.07 sone reduction in loudness. The proposed optimization scheme may be extended to other vehicles for improving interior acoustic environment.

Interiors Construction Manual integrated planning, finishing and fitting out, technical servcies

CERN Document Server

Hausladen, Gerhard

2010-01-01

Soccer stadiums, airports, theaters, museums it falls to very few architects to tackle spectacular building tasks like these. The everyday work of most architects is more often focused on ""manageable"" projects like the renovation, remodeling, or rebuilding of single- and multi-family houses, schools, and offices. Whatever the nature of the building task, interior construction is always a significant design and qualitative challenge that calls for highly detailed technical expertise. After all, it affects the realm that will be brought to life and utilized by the user when the task is finished, and whose aesthetic and functional serviceability will be put to the test each and every day. The Interior Construction Manual supports planners in their daily work as a practical planning aid and reference work with the relevant standards, guidelines, reference details, and constructional solutions, all illustrated by built example projects. It brings together the crucial facts on all aspects of interior construction...

Studi Terapan Gaya Desain Interior Jepang Restoran Tomoto, Imari, Kayu, Nishiki Surabaya

OpenAIRE

Widjaja, Eveline

2013-01-01

Applied studies in interior design style Japanese restaurant tomoto, Imari, Wood, Nishiki, Surabaya has been the subject of research that analyzed from the viewpoint of Japanese design style. Restaurant is a place of business or building that provides food and beverages which managed commercially by providing good service to all visitors. The application of different Japanese design style at every restaurant draw researchers to examine more in terms of the concept of Japanese design style. Th...

Interior point decoding for linear vector channels

International Nuclear Information System (INIS)

Wadayama, T

2008-01-01

In this paper, a novel decoding algorithm for low-density parity-check (LDPC) codes based on convex optimization is presented. The decoding algorithm, called interior point decoding, is designed for linear vector channels. The linear vector channels include many practically important channels such as inter-symbol interference channels and partial response channels. It is shown that the maximum likelihood decoding (MLD) rule for a linear vector channel can be relaxed to a convex optimization problem, which is called a relaxed MLD problem

Interior point decoding for linear vector channels

Energy Technology Data Exchange (ETDEWEB)

Wadayama, T [Nagoya Institute of Technology, Gokiso, Showa-ku, Nagoya, Aichi, 466-8555 (Japan)], E-mail: wadayama@nitech.ac.jp

2008-01-15

In this paper, a novel decoding algorithm for low-density parity-check (LDPC) codes based on convex optimization is presented. The decoding algorithm, called interior point decoding, is designed for linear vector channels. The linear vector channels include many practically important channels such as inter-symbol interference channels and partial response channels. It is shown that the maximum likelihood decoding (MLD) rule for a linear vector channel can be relaxed to a convex optimization problem, which is called a relaxed MLD problem.

Graviatoms with de Sitter Interior

Directory of Open Access Journals (Sweden)

Irina Dymnikova

2013-01-01

Full Text Available We present a graviatom with de Sitter interior as a new candidate to atomic dark matter generically related to a vacuum dark energy through its de Sitter vacuum interior. It is a gravitationally bound quantum system consisting of a nucleus represented by a regular primordial black hole (RPBH, its remnant or gravitational vacuum soliton G-lump, and a charged particle. We estimate probability of formation of RPBHs and G-lumps in the early Universe and evaluate energy spectrum and electromagnetic radiation of graviatom which can in principle bear information about a fundamental symmetry scale responsible for de Sitter interior and serve as its observational signatures.

A primal-dual interior point method for large-scale free material optimization

DEFF Research Database (Denmark)

Weldeyesus, Alemseged Gebrehiwot; Stolpe, Mathias

2015-01-01

Free Material Optimization (FMO) is a branch of structural optimization in which the design variable is the elastic material tensor that is allowed to vary over the design domain. The requirements are that the material tensor is symmetric positive semidefinite with bounded trace. The resulting...... optimization problem is a nonlinear semidefinite program with many small matrix inequalities for which a special-purpose optimization method should be developed. The objective of this article is to propose an efficient primal-dual interior point method for FMO that can robustly and accurately solve large...... of iterations the interior point method requires is modest and increases only marginally with problem size. The computed optimal solutions obtain a higher precision than other available special-purpose methods for FMO. The efficiency and robustness of the method is demonstrated by numerical experiments on a set...

Design of Dwellings and Interior Family Space in China: Understanding the History of Change and Opportunities for Improved Sustainability Practices

Directory of Open Access Journals (Sweden)

Adrian Pitts

2014-10-01

Full Text Available This paper reviews briefly the recent history of dwelling design in China. It notes the rapid changes that have taken place since the 1980s and identifies the way contemporary procurement processes leave out the final fit-out and decoration/refurbishment. A range of stakeholders were interviewed, and access was gained to drawings and other technical data that indicated how the secondary processes were carried out. These are largely ungoverned by regulation in the same way necessary for initial design. The key group is the occupants who drive the fit-out and decoration according to personal and cultural requirements, but often with less than perfect understanding of sustainability. The interior design industry has developed rapidly over the same period and was initially lacking in professional knowledge and understanding (something which can still be found. Advice provided to dwelling occupants was based more on appearance than function and efficiency. Over the same period, beneficial modifications to construction processes have been introduced in relation to structural design, and it should be possible to do the same for sustainability-related design issues. The paper advocates: more regulation; better assessment techniques; more information and guidance for home-owners; and a greater focus on energy issues.

Infeasible Interior-Point Methods for Linear Optimization Based on Large Neighborhood

NARCIS (Netherlands)

Asadi, A.R.; Roos, C.

2015-01-01

In this paper, we design a class of infeasible interior-point methods for linear optimization based on large neighborhood. The algorithm is inspired by a full-Newton step infeasible algorithm with a linear convergence rate in problem dimension that was recently proposed by the second author.

Apply 3D model on the customized product color combination for the interior decoration

Science.gov (United States)

Chen, Cheih-Ying

2013-03-01

The customized product color interface for the interior decoration is designed to simulate the display of various color combination sofas in the interior of the room. There are 144 color combinations of the spatial image resulted from four the interior rooms and 36 popular color sofas. The image compositing technique is adopted to appear the 144 color combinations of the spatial image on computer screen. This study tests the experience of using the interface by the questionnaire for User Interface Satisfaction (QUIS). The results show that the high grade of evaluation items including wonderful, easy, satisfying, stimulating and flexible for the experience of users. Therefore, the entrepreneur who wants to display the color primarily commodity could using the customized color combination interface with 3D models for consumers to take opportunity to find the appropriate products to meet with the interior room, so as to shorten communication time between entrepreneurs and consumers.

Determining building interior structures using compressive sensing

Science.gov (United States)

Lagunas, Eva; Amin, Moeness G.; Ahmad, Fauzia; Nájar, Montse

2013-04-01

We consider imaging of the building interior structures using compressive sensing (CS) with applications to through-the-wall imaging and urban sensing. We consider a monostatic synthetic aperture radar imaging system employing stepped frequency waveform. The proposed approach exploits prior information of building construction practices to form an appropriate sparse representation of the building interior layout. We devise a dictionary of possible wall locations, which is consistent with the fact that interior walls are typically parallel or perpendicular to the front wall. The dictionary accounts for the dominant normal angle reflections from exterior and interior walls for the monostatic imaging system. CS is applied to a reduced set of observations to recover the true positions of the walls. Additional information about interior walls can be obtained using a dictionary of possible corner reflectors, which is the response of the junction of two walls. Supporting results based on simulation and laboratory experiments are provided. It is shown that the proposed sparsifying basis outperforms the conventional through-the-wall CS model, the wavelet sparsifying basis, and the block sparse model for building interior layout detection.

Estimation of parameters of interior permanent magnet synchronous motors

International Nuclear Information System (INIS)

Hwang, C.C.; Chang, S.M.; Pan, C.T.; Chang, T.Y.

2002-01-01

This paper presents a magnetic circuit model to the estimation of machine parameters of an interior permanent magnet synchronous machine. It extends the earlier work of Hwang and Cho that focused mainly on the magnetic aspects of motor design. The proposed model used to calculate EMF, d- and q-axis reactances. These calculations are compared to those from finite element analysis and measurement with good agreement

Estimation of parameters of interior permanent magnet synchronous motors

CERN Document Server

Hwang, C C; Pan, C T; Chang, T Y

2002-01-01

This paper presents a magnetic circuit model to the estimation of machine parameters of an interior permanent magnet synchronous machine. It extends the earlier work of Hwang and Cho that focused mainly on the magnetic aspects of motor design. The proposed model used to calculate EMF, d- and q-axis reactances. These calculations are compared to those from finite element analysis and measurement with good agreement.

The Flexibility Imperative, the Transformation of the Building, and the “Unbecoming” of the Traditional Interior

Directory of Open Access Journals (Sweden)

Lubomir Popov

2016-12-01

Full Text Available A shift toward the post-modern in the humanities has fostered novel discourses on spatial phenomena including the production of space, the spatialization of society and culture, and the becoming of interiors. A recent debate on the unbecoming of interior had both puzzled me and encouraged me to explore further and to reinterpret emerging ideas in the interior design academic community. These new developments generate opportunities for investigating spatial phenomena in unconventional and novel ways, construing them as products of changing social practices rather than technical action or artistic serendipity. The problem of this study is the unbecoming of interior as a result of the new sociocultural realities. These realities have led to the unbecoming of the conventional building and in effect, the unbecoming of the interior the way society construes it today. The methodology utilizes a Symbolic Interactionist perspective and a case study approach. The paper interprets the becoming and unbecoming of interior as a dialectical processes of developing and changing relationships between types of spatialities and human agency with respect to particular sociocultural context. The findings highlight how the concerns with social indeterminacy and unpredictability translate into a requirement for building flexibility and then into the unbecoming of conventional spatial paradigms and the interior the way we know it today. These ideas spur questions about the nature and purpose of buildings and interiors, the relationships between them, and the role of impending cultures in the production of new kinds of spatialities.

Interior operators and topological connectedness | Castellini ...

African Journals Online (AJOL)

A categorical notion of interior operator is used in topology to define connectedness and disconnectedness with respect to an interior operator. A commutative diagram of Galois connections is used to show a relationship between these notions and Arhangelskii and Wiegandt's notions of connectedness and ...

The Elements and Principles of Design: A Baseline Study

Science.gov (United States)

Adams, Erin

2013-01-01

Critical to the discipline, both professionally and academically, are the fundamentals of interior design. These fundamentals include the elements and principles of interior design: the commonly accepted tools and vocabulary used to create and communicate successful interior environments. Research indicates a lack of consistency in both the…

Meaning of Interior Tomography

Science.gov (United States)

Wang, Ge; Yu, Hengyong

2013-01-01

The classic imaging geometry for computed tomography is for collection of un-truncated projections and reconstruction of a global image, with the Fourier transform as the theoretical foundation that is intrinsically non-local. Recently, interior tomography research has led to theoretically exact relationships between localities in the projection and image spaces and practically promising reconstruction algorithms. Initially, interior tomography was developed for x-ray computed tomography. Then, it has been elevated as a general imaging principle. Finally, a novel framework known as “omni-tomography” is being developed for grand fusion of multiple imaging modalities, allowing tomographic synchrony of diversified features. PMID:23912256

Qualitative and quantitative assessment of interior moisture buffering by enclosures

DEFF Research Database (Denmark)

Janssen, Hans; Roels, Staf

2009-01-01

The significance of interior humidity in attaining sustainable, durable, healthy and comfortable buildings is increasingly recognised. Given their significant interaction, interior humidity appraisals need a qualitative and/or quantitative assessment of interior moisture buffering. While the effe......The significance of interior humidity in attaining sustainable, durable, healthy and comfortable buildings is increasingly recognised. Given their significant interaction, interior humidity appraisals need a qualitative and/or quantitative assessment of interior moisture buffering. While...... the effective moisture penetration depth and effective capacitance models allow quantified assessment, their reliance on the ‘moisture penetration depth’ necessitates comprehensive material properties and hampers their application to multi-dimensional interior objects. On the other hand, while various recently...... an alternative basis for quantitative evaluation of interior moisture buffering by the effective moisture penetration depth and effective capacitance models. The presented methodology uses simple and fast measurements only and can also be applied to multimaterial and/or multidimensional interior elements....

An interior vessel viewing system for DIII-D

International Nuclear Information System (INIS)

Senior, R.

1989-11-01

It was anticipated that there could be damage to the interior walls of the vacuum vessel during operations of the DIII-D tokamak. A method of viewing the inside of the vessel from the outside was required, that would allow the interior walls to be inspected visually for damage and to locate any debris resulting from operations. A miniature closed circuit television color camera system was developed which could be inserted into one of several ports of the vessel during a 'clean' vent, i.e., vented to inert gas. The system has pan, tilt and zoom capability and carries its own lighting. The use of this system allows a quick assessment of the condition of the vessel to be made under 'clean' vent conditions. This precludes the need for the permit process and manned entry into the vessel which would allow air inside the vessel. A permanent record of the inspection can then be made on video tape. The design and configuration of this camera system is presented and its use as a diagnostic tool discussed. 2 refs., 5 figs

VARIATIONAL PRINCIPLE FOR PLANETARY INTERIORS

International Nuclear Information System (INIS)

Zeng, Li; Jacobsen, Stein B.

2016-01-01

In the past few years, the number of confirmed planets has grown above 2000. It is clear that they represent a diversity of structures not seen in our own solar system. In addition to very detailed interior modeling, it is valuable to have a simple analytical framework for describing planetary structures. The variational principle is a fundamental principle in physics, entailing that a physical system follows the trajectory, which minimizes its action. It is alternative to the differential equation formulation of a physical system. Applying the variational principle to the planetary interior can beautifully summarize the set of differential equations into one, which provides us some insight into the problem. From this principle, a universal mass–radius relation, an estimate of the error propagation from the equation of state to the mass–radius relation, and a form of the virial theorem applicable to planetary interiors are derived.

Interior Temperature Measurement Using Curved Mercury Capillary Sensor Based on X-ray Radiography

Science.gov (United States)

Chen, Shuyue; Jiang, Xing; Lu, Guirong

2017-07-01

A method was presented for measuring the interior temperature of objects using a curved mercury capillary sensor based on X-ray radiography. The sensor is composed of a mercury bubble, a capillary and a fixed support. X-ray digital radiography was employed to capture image of the mercury column in the capillary, and a temperature control system was designed for the sensor calibration. We adopted livewire algorithms and mathematical morphology to calculate the mercury length. A measurement model relating mercury length to temperature was established, and the measurement uncertainty associated with the mercury column length and the linear model fitted by least-square method were analyzed. To verify the system, the interior temperature measurement of an autoclave, which is totally closed, was taken from 29.53°C to 67.34°C. The experiment results show that the response of the system is approximately linear with an uncertainty of maximum 0.79°C. This technique provides a new approach to measure interior temperature of objects.

Arc-Search Infeasible Interior-Point Algorithm for Linear Programming

OpenAIRE

Yang, Yaguang

2014-01-01

Mehrotra's algorithm has been the most successful infeasible interior-point algorithm for linear programming since 1990. Most popular interior-point software packages for linear programming are based on Mehrotra's algorithm. This paper proposes an alternative algorithm, arc-search infeasible interior-point algorithm. We will demonstrate, by testing Netlib problems and comparing the test results obtained by arc-search infeasible interior-point algorithm and Mehrotra's algorithm, that the propo...

Interior-exterior connection in architectural design based on the incorporation of spatial in between layers. Study of four architectural projects

Directory of Open Access Journals (Sweden)

Krstić Hristina

2016-01-01

Full Text Available Different spatial layers in the architectural structure of a building can create particular spatial relations and an architectural space that cannot be defined as an inner space or as an outer space, but one which has the characteristics of both. This space, which can be called “in between space”, appears as the result of a specific design concept in which the architectural composition is created by gradual insertion of volumes one inside another, like a box that is placed inside a box, inside of which is placed another smaller box and so on. The incorporation of various layers in the spatial arrangement of volumes in certain architectural compositions can be conceived as a possible approach in connecting the interior and exterior. This kind of conceptual design distinguishes itself from the common approach by its specific architecture that offers richness, variety, complexity and unique perception of space, thereby increasing its value. The paper investigates this particular concept through the analysis of four residential houses (Villa Le Lac by Le Corbusier, Solar House by Oswald Mathias Ungers, House N by Sou Fujimoto and Guerrero House by Alberto Campo Baeza, and it strives to find out the concept’s use and advantages, all with the aim of opening up new possibilities in the design of buildings and enriching the design process.

Optimal Power Flow by Interior Point and Non Interior Point Modern Optimization Algorithms

Directory of Open Access Journals (Sweden)

Marcin Połomski

2013-03-01

Full Text Available The idea of optimal power flow (OPF is to determine the optimal settings for control variables while respecting various constraints, and in general it is related to power system operational and planning optimization problems. A vast number of optimization methods have been applied to solve the OPF problem, but their performance is highly dependent on the size of a power system being optimized. The development of the OPF recently has tracked significant progress both in numerical optimization techniques and computer techniques application. In recent years, application of interior point methods to solve OPF problem has been paid great attention. This is due to the fact that IP methods are among the fastest algorithms, well suited to solve large-scale nonlinear optimization problems. This paper presents the primal-dual interior point method based optimal power flow algorithm and new variant of the non interior point method algorithm with application to optimal power flow problem. Described algorithms were implemented in custom software. The experiments show the usefulness of computational software and implemented algorithms for solving the optimal power flow problem, including the system model sizes comparable to the size of the National Power System.

Optimal Design of Stator Interior Permanent Magnet Machine with Minimized Cogging Torque for Wind Power Application

DEFF Research Database (Denmark)

Chen, Zhe; Zhang, Jianzhong; Cheng, Ming

2008-01-01

This paper proposes a new approach to minimize the cogging torque of a stator interior permanent magnet (SIPM) machine. The optimization of stator slot gap and permanent magnet is carried out and the cogging torque ripple is analyzed by using finite element analysis. Experiments on a prototype...

Integration of Models of Building Interiors with Cadastral Data

OpenAIRE

Gotlib Dariusz; Karabin Marcin

2017-01-01

Demands for applications which use models of building interiors is growing and highly diversified. Those models are applied at the stage of designing and construction of a building, in applications which support real estate management, in navigation and marketing systems and, finally, in crisis management and security systems. They are created on the basis of different data: architectural and construction plans, both, in the analogue form, as well as CAD files, BIM data files, by means of las...

Black Hole Interior in Quantum Gravity.

Science.gov (United States)

Nomura, Yasunori; Sanches, Fabio; Weinberg, Sean J

2015-05-22

We discuss the interior of a black hole in quantum gravity, in which black holes form and evaporate unitarily. The interior spacetime appears in the sense of complementarity because of special features revealed by the microscopic degrees of freedom when viewed from a semiclassical standpoint. The relation between quantum mechanics and the equivalence principle is subtle, but they are still consistent.

Perancangan Interior Sekolah Musik Surabaya Symphony Orchestra Di Surabaya

OpenAIRE

Grace Mulyono, Liliyana Tan IGN. Ardana

2016-01-01

Classical music has a lot of benefits that can make more optimal brain development. Surabaya Symphony Orchestra Music School is a place to facilitate society in Surabaya to learn classical music.Many activities that can support learning classical music has not been facilitated due to the limited area, and lack of interior on SSO create interest and learning music became blocked. In accordance with Dolce concept which means “to play sweetly”, the music school design is using bright colors with...

A review on the major sources of the interior sound vibration and riding comfort in vehicles

Science.gov (United States)

AlDhahebi, Adel Mohammed; Junoh, Ahmad Kadri; Ahmed, Amran

2016-10-01

Vehicle interior comfort is a crucial criteria that is considered by the perspective customer when purchasing a new vehicle. Meanwhile, automotive industries face the challenges for producing vehicles with better design criteria that meet the expectations of customers and eventually promote higher competitive advantages in areas of acoustic performance, cost effectiveness, product weight, and global competitive market. This review presents the major sources that influence the generation of noise and vibration in the interior part of the vehicles. It also demonstrates the relative methods that are used to assess the interior acoustics and vibration and further improve the riding comfort. This study is of a particular importance for acoustical researchers and automobile engineers, where it brings about suggestions and fundamentals that can contribute to acoustical comfort in vehicles.

BLM OR Other National Designation Polygon

Data.gov (United States)

Department of the Interior — ond_poly: Miscellaneous areas designated by law, presidential proclamation, an order of the Secretary of the Interior, and not from BLM planning, that don’t fit with...

Interior transmission eigenvalues of a rectangle

International Nuclear Information System (INIS)

Sleeman, B D; Stocks, D C

2016-01-01

The problem of scattering of acoustic waves by an inhomogeneous medium is intimately connected with so called inside–outside duality, in which the interior transmission eigenvalue problem plays a fundamental role. Here a study of the interior transmission eigenvalues for rectangular domains of constant refractive index is made. By making a nonstandard use of the classical separation of variables technique both real and complex eigenvalues are determined. (paper)

Design of Position Estimation Strategy of Sensorless Interior PMSM at Standstill Using Minimum Voltage Vector Injection Method

DEFF Research Database (Denmark)

Wu, Xuan; Huang, Shoudao; Liu, Xiao

2017-01-01

This paper presents a new initial rotor position estimation method for an interior permanent magnet synchronous motor. The proposed method includes two steps: firstly, the minimum voltage vectors are injected to estimate the rotor position. Secondly, in order to identify the magnet polarity...

Knotworking In An Interior Décor Process

DEFF Research Database (Denmark)

Rasmussen, Mai; Jensen, Rasmus Lund; Fisker, Anna Marie

2016-01-01

These days, new buildings are being built at Aalborg University in Denmark, why interior décor processes are initiated. Planning the interior décor of Aalborg University is centralized at the Shared Service Center, where internal architects furnish the spaces and buy the selected furniture withou...

Measure Guideline: Summary of Interior Ducts in New Construction, Including an Efficient, Affordable Method to Install Fur-Down Interior Ducts

Energy Technology Data Exchange (ETDEWEB)

Beal, D. [BA-PIRC, Cocoa, FL (United States); McIlvaine, J. [BA-PIRC, Cocoa, FL (United States); Fonorow, K. [BA-PIRC, Cocoa, FL (United States); Martin, E. [BA-PIRC, Cocoa, FL (United States)

2011-11-01

This document illustrates guidelines for the efficient installation of interior duct systems in new housing, including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces.

A Riccati-Based Interior Point Method for Efficient Model Predictive Control of SISO Systems

DEFF Research Database (Denmark)

Hagdrup, Morten; Johansson, Rolf; Bagterp Jørgensen, John

2017-01-01

model parts separate. The controller is designed based on the deterministic model, while the Kalman filter results from the stochastic part. The controller is implemented as a primal-dual interior point (IP) method using Riccati recursion and the computational savings possible for SISO systems...

Assessment of Interior and Area Artificial Lighting in Hospitals of Hamadan City

Directory of Open Access Journals (Sweden)

Rostam Golmohamadi

2014-04-01

Full Text Available Background & Objectives: Comfort lighting is one of the most important topics, which provides optimum physical conditions in general environment and workplaces such as hospitals. This study aimed to evaluate general, local and area artificial illumination of Hamadan city hospitals . Methods : In this descriptive-analytical study, general, local and area artificial illumination in seven Hamadan hospitals in 2006 were evaluated. Lighting intensities (illuminance were measured according to recommended IESNA method using the lux meter model (Lutron-Lx102 in the early hours of night. Lighting quality parameters such as color rendering, technical suitability of design and lighting uniformity were evaluated. Data was analyzed using SPSS 13 . Results : The average of interior illuminance was 90.44 ± 46.97 lx, which was lower than the national recommended limits. Maximum and minimum intensity values of interior illuminance were in nursing station and laboratory, respectively. The average of area illuminance was 47.92 ± 53.2 lx and local illuminance was 131.5 ± 60.2 lx, which were lower than the recommended limits. Maximum intensity of local illuminance was in laboratories and the minimum levels were in admitted rooms, checkup and injection units. In total, 90.6% of general interior lighting systems, 83.3% of area lighting systems and 100% of local lighting systems had unaccepted design . Conclusion : The average of general, local and area illuminance in Hamadan hospitals were not within the acceptable limits for comfort lighting. To obtain comfort lighting in studied hospitals, reforming and modifying lightening systems is necessary .

Aplikasi Kaca pada Perancangan Desain Interior dan Arsitektur

Directory of Open Access Journals (Sweden)

Grace Hartanti

2014-10-01

Full Text Available Glass is a clear and see-through material that comes from SiO2, which is a form of sands heated to 2000oC until they are melted. Glass has its own characteristics, such as: hard, transparent, clear, and fragile. The use of glass can be applied in a wide range of building elements, for example: roofing, walling, flooring, window and door, even staircase elements. By this wide range of utilities, this material could be very useful in design process. It can provide a wider view for small room with a lot of partitions or wall. It is because this material allows the light passing trough the material. That’s why people are able to see what’s behind the glass and eyes can see-through although the glass wall is limited by the glass. Hopefully, the research about diversity of glasses will be useful for designer, architect, and community in interior design and architecture world. 

Characterization of the Interior Density Structure of Near Earth Objects with Muons

Science.gov (United States)

Prettyman, T. H.; Sykes, M. V.; Miller, R. S.; Pinsky, L. S.; Empl, A.; Nolan, M. C.; Koontz, S. L.; Lawrence, D. J.; Mittlefehldt, D. W.; Reddell, B. D.

2015-12-01

Near Earth Objects (NEOs) are a diverse population of short-lived asteroids originating from the main belt and Jupiter family comets. Some have orbits that are easy to access from Earth, making them attractive as targets for science and exploration as well as a potential resource. Some pose a potential impact threat. NEOs have undergone extensive collisional processing, fragmenting and re-accreting to form rubble piles, which may be compositionally heterogeneous (e.g., like 2008 TC3, the precursor to Almahata Sitta). At present, little is known about their interior structure or how these objects are held together. The wide range of inferred NEO macroporosities hint at complex interiors. Information about their density structure would aid in understanding their formation and collisional histories, the risks they pose to human interactions with their surfaces, the constraints on industrial processing of NEO resources, and the selection of hazard mitigation strategies (e.g., kinetic impactor vs nuclear burst). Several methods have been proposed to characterize asteroid interiors, including radar imaging, seismic tomography, and muon imaging (muon radiography and tomography). Of these, only muon imaging has the potential to determine interior density structure, including the relative density of constituent fragments. Muons are produced by galactic cosmic ray showers within the top meter of asteroid surfaces. High-energy muons can traverse large distances through rock with little deflection. Muons transmitted through an Itokawa-sized asteroid can be imaged using a compact hodoscope placed on or near the surface. Challenges include background rejection and correction for variations in muon production with surface density. The former is being addressed by hodoscope design. Surface density variations can be determined via radar or muon limb imaging. The performance of muon imaging is evaluated for prospective NEO interior-mapping missions.

High Resolution 3D Radar Imaging of Comet Interiors

Science.gov (United States)

Asphaug, E. I.; Gim, Y.; Belton, M.; Brophy, J.; Weissman, P. R.; Heggy, E.

2012-12-01

images of interior structure to ~20 m, and to map dielectric properties (related to internal composition) to better than 200 m throughout. This is comparable in detail to modern 3D medical ultrasound, although we emphasize that the techniques are somewhat different. An interior mass distribution is obtained through spacecraft tracking, using data acquired during the close, quiet radar orbits. This is aligned with the radar-based images of the interior, and the shape model, to contribute to the multi-dimensional 3D global view. High-resolution visible imaging provides boundary conditions and geologic context to these interior views. An infrared spectroscopy and imaging campaign upon arrival reveals the time-evolving activity of the nucleus and the structure and composition of the inner coma, and the definition of surface units. CORE is designed to obtain a total view of a comet, from the coma to the active and evolving surface to the deep interior. Its primary science goal is to obtain clear images of internal structure and dielectric composition. These will reveal how the comet was formed, what it is made of, and how it 'works'. By making global yet detailed connections from interior to exterior, this knowledge will be an important complement to the Rosetta mission, and will lay the foundation for comet nucleus sample return by revealing the areas of shallow depth to 'bedrock', and relating accessible deposits to their originating provenances within the nucleus.

Deep Interior: Radio Reflection Tomographic Imaging of Earth-Crossing Asteroids

Science.gov (United States)

Asphaug, E.; Belton, M.; Safaeinili, A.; Klaasen, K.; Ostro, S.; Yeomans, D.; Plaut, J.

2004-12-01

Near-Earth Objects (NEOs) present an important scientific question and an intriguing space hazard. They are scrutinized by a number of large, dedicated groundbased telescopes, and their diverse compositions are represented by thousands of well-studied meteorites. A successful program of NEO spacecraft exploration has begun, and we are proposing Deep Interior as the next logical step. Our mission objective is to image the deep interior structure of two NEOs using radio reflection tomography (RRT), in order to explore the record of asteroid origin and impact evolution, and to test the fundamental hypothesis that these important members of the solar system are rubble piles rather than consolidated bodies. Asteroid Interiors. Our mission's RRT technique is like a CAT scan from orbit. Closely sampled radar echoes yield volumetric maps of mechanical and compositional boundaries, and measure interior material dielectric properties. Exteriors. We use color imaging to explore the surface expressions of unit boundaries, in order to relate interior radar imaging to what is observable from spacecraft imaging and from Earth. Gravity and high fidelity geodesy are used to explore how interior structure is expressed in shape, density, mass distribution and spin. Diversity. We first visit a common, primitive, S-type asteroid. We next visit an asteroid that was perhaps blasted from the surface of a differentiated asteroid. We attain an up-close and inside look at two taxonomic archetypes spanning an important range of NEO mass and spin rate. Scientific focus is achieved by keeping our payload simple: Radar. A 30-m (tip-to-tip) cross-dipole antenna system operates at 5 and 15-MHz, with electronics heritage from JPL's MARSIS contribution to Mars Express, and antenna heritage from IMAGE and LACE. The 5-MHz channel is designed to penetrate >1 km of basaltic rock, and 15-MHz penetrates a few 100 m or more. They bracket the diversity of solar system materials that we are likely to

Upgrading the seismic performance of the interior water pipe supporting system of a cooling tower

International Nuclear Information System (INIS)

Manos, G.C.; Soulis, V.J.

2005-01-01

This paper presents results from a numerical study that was performed in order to simulate the seismic behavior of the interior support system of the piping and cooling features of a cooling tower in one of the old power stations located in an area at the North-Western part of Greece. This cooling tower has a diameter of 60 m and a height of 100 m. The interior piping support system consists mainly of a series of nine-meter high pre-cast vertical columns made by pre-stressed concrete; these columns, together with reinforced concrete pre-cast horizontal beams that are joined monolithically with the columns at their top, form the old interior supporting system. This system represented a very flexible structure, a fact that was verified from a preliminary numerical analysis of its seismic behavior. The maximum response to the design earthquake levels resulted in large horizontal displacements at the top of the columns as well as overstress to some of the columns. The most important part of the current numerical investigation was to examine various strengthening schemes of the old interior support system and to select one that will demonstrate acceptable seismic behavior. (authors)

Sustainable Design Practices and Consumer Behavior: FCS Student Perceptions

Science.gov (United States)

Ulasewicz, Connie; Vouchilas, Gus

2008-01-01

The purpose of this study was to gather information on the perceptions of sustainability in design held by family and consumer sciences (FCS) students majoring in interior design and apparel design/merchandising. Likert-scale responses were used to explore differences and similarities between students in the two majors. Overall, interior design…

Materializing a responsive interior: designing minimum energy structures

DEFF Research Database (Denmark)

Mossé, Aurélie; Kofod, Guggi; Ramsgaard Thomsen, Mette

2011-01-01

This paper discusses a series of design-led experiments investigating future possibilities for architectural materialization relying on minimum energy structures as an example of adaptive structure. The structures have been made as laminates of elastic membrane under high tension with flexible...... (Lendlein, Kelch 2002) or light (van Oosten, Bastiaansen et al. 2009). All in all, this approach could form a whole new design paradigm, in which efficient 2D-manufacturing can lead to highly flexible, low weight and adaptable 3D-structures. This is illustrated by the design and manufacture of electro...

Pengaruh Elemen Desain Interior Terhadap Persepsi Maskulinitas (Studi Kasus: Barber Shop

Directory of Open Access Journals (Sweden)

Ardiles Septuaginta Sopakuwa

2016-07-01

Full Text Available Barber shop merupakan ruang publik yang masih belum diinfiltrasi oleh wanita dan diperuntukkan bagi pria saja, maka barber shop dianggap cocok untuk menjadi representasi ruang publik khusus pria. Penelitian ini berupaya mencari tahu dampak dari elemen lingkungan interior terhadap persepsi maskulin, sehingga ruang-ruang publik khusus pria yang ada saat ini dapat secara optimal memenuhi kebutuhan persepsi maskulin. Penelitian ini menggunakan stimulus visual berupa desain tiga dimensional dari lima kondisi barber shop yang merupakan manipulasi kombinasi variabel bebas berupa warna biru (A1 dan jingga (A2, serta material concrete (B1 dan kayu (B2. Kombinasi warna dan material ini menghasilkan empat kondisi eksperimental, dan  satu kondisi kontrol tanpa elemen warna maupun material experimental yang diterapkan. Eksperimen dilakukan terhadap 30 orang responden yang merupakan pelanggan barber shop untuk memberikan respon persepsi, emosi, dan sikap terhadap 5 buah stimulus visual yang menggambarkan kondisi barber shop. Data yang didapatkan dianalisa dengan metode ANOVA dan menunjukkan bahwa perbedaan respon terhadap keempat kondisi eksperimental tidak signifikan. Kondisi yang dipersepsi paling positif memiliki setidaknya satu elemen interior maskulin. Sementara kondisi yang dinilai paling mendukung emosi positif tidak menerapkan satu elemen interior maskulin pun. Sehingga menarik untuk menilai lebih jauh dampak kombinasi elemen interior ini terhadap respon responden. Kata Kunci: barber shop; desain eksperimental; emosi positif; persepsi maskulinitas; sikap positif.Influence of Interior Design Elements in Perception of Masculinity (Case Study: Barber ShopThe barber shop is one of the few public spaces that are not infiltrated by women. Therefore, the barber shop is a good representative of a male-only public space. This research was aimed at finding out the effect of interior-environment elements towards a masculine perception, so that current male

Deep Interior: The first comprehensive geophysical investigation of an asteroid

Science.gov (United States)

Asphaug, E.; Belton, M.; Klaasen, K.; McFadden, L.; Ostro, S.; Safaeinili, A.; Scheeres, D.; Sunshine, J.; Yeomans, D.

Near-Earth Objects (NEOs) come closer to Earth than any other celestial body, and their compositions are represented on Earth by thousands of well-studied meteorites. Yet we understand neither their origin, evolution, nor their geophysical behavior. These secrets are locked up in their unexplored interiors. Goal 1 of the NASA Strategic Plan emphasizes the requirement to catalogue and understand NEOs down to 1 km diameter. Goal 4 urges us to understand natural processes at work in the low gravity environment. Goal 5 expresses the need to explore the solar system and to learn how planets originated and evolved. In response to the NASA Strategic Plan we are proposing a NASA Discovery mission whose primary science objective is to greatly advance the realization of these Goals by conducting the first investigation of the global geophysics of an asteroid. Radio reflection data from 5 km orbit about a 1 km NEO will provide a tomographic 3D image of electromagnetic properties. Mechanical properties will be examined in the simplest possible way, using explosions to initiate seismic cratering events and to expose diverse interior units for spectroscopic analysis. Deep Interior is the lowest-risk, lowest cost path towards attaining the required characterization of NEOs. It breaks new ground for future missions to asteroids and comets and facilitates the design of reliable NEO technologies. Our science goals are as follows, and the techniques (radio science, imaging, IR spectroscopy, active surface science) will be described at this meeting: Asteroid Interiors. Radio, gravity, and seismology experiments give a complete first picture of an asteroid's deep interior, resolving inclusions, voids and unit boundaries at ˜ 30 m scales, and determining global and regional mechanical properties. Surface Geophysics. Blast experiments explore the structure and mechanics of the upper meters, demonstrate microgravity cratering, trigger natural geomorphic events, and expose subsurface

Penerapan Interior Branding pada Hotel Yello

OpenAIRE

Gunawan, Astri Indrawati

2017-01-01

The development of entertainment and tourism in Surabaya has lead to increasing of tourist arrival. This condition makes hotel businesses flourishing. The 3 star hotel is currently the best-selling hotel due to adequate facilities at current economic level. To cope with the competition, many 3 star hotels applied branding in the interior. Interior branding is formed not only from the visual beauty, but rather to the room's atmosphere that contains stories and unique messages to influence the ...

Physics Model-Based Scatter Correction in Multi-Source Interior Computed Tomography.

Science.gov (United States)

Gong, Hao; Li, Bin; Jia, Xun; Cao, Guohua

2018-02-01

Multi-source interior computed tomography (CT) has a great potential to provide ultra-fast and organ-oriented imaging at low radiation dose. However, X-ray cross scattering from multiple simultaneously activated X-ray imaging chains compromises imaging quality. Previously, we published two hardware-based scatter correction methods for multi-source interior CT. Here, we propose a software-based scatter correction method, with the benefit of no need for hardware modifications. The new method is based on a physics model and an iterative framework. The physics model was derived analytically, and was used to calculate X-ray scattering signals in both forward direction and cross directions in multi-source interior CT. The physics model was integrated to an iterative scatter correction framework to reduce scatter artifacts. The method was applied to phantom data from both Monte Carlo simulations and physical experimentation that were designed to emulate the image acquisition in a multi-source interior CT architecture recently proposed by our team. The proposed scatter correction method reduced scatter artifacts significantly, even with only one iteration. Within a few iterations, the reconstructed images fast converged toward the "scatter-free" reference images. After applying the scatter correction method, the maximum CT number error at the region-of-interests (ROIs) was reduced to 46 HU in numerical phantom dataset and 48 HU in physical phantom dataset respectively, and the contrast-noise-ratio at those ROIs increased by up to 44.3% and up to 19.7%, respectively. The proposed physics model-based iterative scatter correction method could be useful for scatter correction in dual-source or multi-source CT.

26 CFR 49.4253-9 - Exemption for certain interior communication systems.

Science.gov (United States)

2010-04-01

... Exemption for certain interior communication systems. (a) In general. The taxes imposed by section 4251 do... rendered through the use of an interior communication system. (b) Interior communication system. The term “interior communication system” means any system: (1) No part of which is situated off the premises of the...

3D radar wavefield tomography of comet interiors

Science.gov (United States)

Sava, Paul; Asphaug, Erik

2018-04-01

Answering fundamental questions about the origin and evolution of small planetary bodies hinges on our ability to image their surface and interior structure in detail and at high resolution. The interior structure is not easily accessible without systematic imaging using, e.g., radar transmission and reflection data from multiple viewpoints, as in medical tomography. Radar tomography can be performed using methodology adapted from terrestrial exploration seismology. Our feasibility study primarily focuses on full wavefield methods that facilitate high quality imaging of small body interiors. We consider the case of a monostatic system (co-located transmitters and receivers) operated in various frequency bands between 5 and 15 MHz, from a spacecraft in slow polar orbit around a spinning comet nucleus. Using realistic numerical experiments, we demonstrate that wavefield techniques can generate high resolution tomograms of comets nuclei with arbitrary shape and complex interior properties.

Deep Interior: Multiple-Rendezvous Prospecting of NEOs

Science.gov (United States)

Kakuda, R. Y.; Asphaug, E.; Belton, M. J. S.; Gulkis, S.; Huebner, W. F.

2000-10-01

This is an international multiple-rendezvous mission designed to prospect the deep interior and subsurface geophysical properties of diverse near-Earth objects, using reflection radar tomography, imaging, gravity, and explosions. What we learn will greatly influence future missions and guide strategies for the diversion, disruption, or utilization of potentially hazardous objects. Deep Interior. Low-frequency radar to determine internal variations of complex permittivity at resolutions approaching 20 m. Map inclusions or voids, fracture geometries, and compositional or structural boundaries. Subsurface. High-frequency radar to determine depth of regolith, existence and nature of cometary mantle, geology beneath and around craters, and subsurface expressions to surface geology. Topography and Geodesy. Stereogrammetric imaging with 1 m/pixel spatial resolution, supplemented by radar altimetry in shadowed regions, to determine detailed shape, volume, and spin state. Compare with radar sounding to learn how internal structure is manifested on the surface. Mass and Density. Total mass and lower moments of the internal mass distribution by mapping the exterior gravitational field. Look for mass concentrations. Surface microphysics and composition. Map color, albedo, and scattering properties of the surface over sunlit regions in six optical filters. Material properties. Deploy grenades to characterize the mechanics and dynamics of surface materials. Record 8 frame/sec, 20 cm/pixel videos of crater formation and ejecta dynamics, to enable simple and direct laboratory constraints on material density, cohesion and porosity. Dust. Look for dust lofted by surface waves propagating from the explosions, to constrain elastic properties and attenuation. Observe longer-term dynamics and optical properties of dust "atmosphere" generated by human activity. Cometary Activity. At comet 107P/Wilson-Harrington, look for expressions of past cometary activity, and for possible awakening

Tropical Engineering. Design Manual-11.1.

Science.gov (United States)

1980-03-01

Concrete exposed to the weather 3" (c) Interior beams and columns 2" (d) Interior walls and slabs 1-1/2" (e) Slabs on grade (wire fabric) 1/2 thickness of... connection design and field fabrica- tion of precast member joints. a. Prestressed Concrete Member. The use of prestressed concrete for structural members...Concrete in contact with ground 3" 3" (b) Concrete exposed to the weather 2" " (c) Interior beams and columns 1-1/2" 2" (d) Interior walls and slabs 1-1/2

PCX, Interior-Point Linear Programming Solver

International Nuclear Information System (INIS)

Czyzyk, J.

2004-01-01

1 - Description of program or function: PCX solves linear programming problems using the Mehrota predictor-corrector interior-point algorithm. PCX can be called as a subroutine or used in stand-alone mode, with data supplied from an MPS file. The software incorporates modules that can be used separately from the linear programming solver, including a pre-solve routine and data structure definitions. 2 - Methods: The Mehrota predictor-corrector method is a primal-dual interior-point method for linear programming. The starting point is determined from a modified least squares heuristic. Linear systems of equations are solved at each interior-point iteration via a sparse Cholesky algorithm native to the code. A pre-solver is incorporated in the code to eliminate inefficiencies in the user's formulation of the problem. 3 - Restriction on the complexity of the problem: There are no size limitations built into the program. The size of problem solved is limited by RAM and swap space on the user's computer

Dynamical measurements of the interior structure of exoplanets

International Nuclear Information System (INIS)

Becker, Juliette C.; Batygin, Konstantin

2013-01-01

Giant gaseous planets often reside on orbits in sufficient proximity to their host stars for the planetary quadrupole gravitational field to become non-negligible. In presence of an additional planetary companion, a precise characterization of the system's orbital state can yield meaningful constraints on the transiting planet's interior structure. However, such methods can require a very specific type of system. This paper explores the dynamic range of applicability of these methods and shows that interior structure calculations are possible for a wide array of orbital architectures. The HAT-P-13 system is used as a case study, and the implications of perturbations arising from a third distant companion on the feasibility of an interior calculation are discussed. We find that the method discussed here is likely to be useful in studying other planetary systems, allowing the possibility of an expanded survey of the interiors of exoplanets.

Interior point algorithms theory and analysis

CERN Document Server

Ye, Yinyu

2011-01-01

The first comprehensive review of the theory and practice of one of today's most powerful optimization techniques. The explosive growth of research into and development of interior point algorithms over the past two decades has significantly improved the complexity of linear programming and yielded some of today's most sophisticated computing techniques. This book offers a comprehensive and thorough treatment of the theory, analysis, and implementation of this powerful computational tool. Interior Point Algorithms provides detailed coverage of all basic and advanced aspects of the subject.

Integration of Models of Building Interiors with Cadastral Data

Science.gov (United States)

Gotlib, Dariusz; Karabin, Marcin

2017-12-01

Demands for applications which use models of building interiors is growing and highly diversified. Those models are applied at the stage of designing and construction of a building, in applications which support real estate management, in navigation and marketing systems and, finally, in crisis management and security systems. They are created on the basis of different data: architectural and construction plans, both, in the analogue form, as well as CAD files, BIM data files, by means of laser scanning (TLS) and conventional surveys. In this context the issue of searching solutions which would integrate the existing models and lead to elimination of data redundancy is becoming more important. The authors analysed the possible input- of cadastral data (legal extent of premises) at the stage of the creation and updating different models of building's interiors. The paper focuses on one issue - the way of describing the geometry of premises basing on the most popular source data, i.e. architectural and construction plans. However, the described rules may be considered as universal and also may be applied in practice concerned may be used during the process of creation and updating indoor models based on BIM dataset or laser scanning clouds

Inequivalence of interior and exterior dynamical problems

International Nuclear Information System (INIS)

Santilli, R.M.

1991-09-01

We begin a series of notes with the review of the historical distinction by Lagrange, Hamilton, Jacobi and other Founding Fathers of analytic dynamics, between the exteriordynamical problem, consisting of motion in vacuum under action-at-a-distance interactions, and the interior dynamical problem, consisting of motion within a resistive medium with the additional presence of contact, nonlinear, nonlocal and nonhamiltonian internal forces. After recalling some of the historical reasons that led to the contemporary, virtually complete restriction of research to the exterior problem, we show that the interior dynamical problem cannot be reduced to the exterior one. This establishes the open character of the central objective of these notes: the identification of the space-time symmetries and relativities that are applicable to interior, nonlinear, nonlocal and nonhamiltonian systems. (author). 29 refs

Advanced thermal comfort modeling for an optimal interior design; Erweiterte thermische Komfortmodellierung fuer eine optimale Innenraumgestaltung

Energy Technology Data Exchange (ETDEWEB)

Streblow, Rita; Mueller, Dirk [RWTH Aachen (Germany). Lehrstuhl fuer Gebaeude- und Raumklimatechnik/E.ON Energy Research Center; Wick, Andreas [Airbus Operations GmbH, Hamburg (Germany)

2012-05-15

Standard comfort models, which consider the human body as one compartment, fail in the case of non-uniform environments. Clear evaluations are only possible by considering local effects. The 33 node comfort model was developed with extensive experimental data with test persons in an airplane cabin, as an example for an inhomogeneous environment. It can be flexibly adapted to other complex interior spaces for their adequate evaluation. (orig.)

Virtual Environment as a Design Tool for Sustainable Residential Spaces in Light of Theory of Planned Behavior

Directory of Open Access Journals (Sweden)

Hebatalla Sherin Nazmy

2016-01-01

Full Text Available This study aims to reveal the impact of Virtual Environment as a design tool on the interior architect's design behavior towards adopting sustainable residential interior design practices. This approach is guided by the Theory of Planned Behaviour as a theoretical framework; the purpose as such would serve to bridge the gap between theoretical knowledge and its practical implementation to promote sustainable design practices. Findings revealed that Virtual Environment is anticipated to assist the interior architect in integrating the complex sustainable residential design objectives, and thus positively affect the interior architect's behavioral performance towards embracing sustainable residential design solutions.

Temporal trends of forest interior conditions in the United States

Science.gov (United States)

Kurt Riitters; James. Wickham

2012-01-01

Nature's benefits derived from forest interior environments cannot be sustained if the natural capital of forest interior area is not sustained. We analyzed the spatial patterns of forest loss and gain for the conterminous United States from 2001 to 2006 to determine whether forest interior environments were maintained at five spatial scales. A 1.1 percent net...

A demonstrated method for upgrading existing control room interiors

International Nuclear Information System (INIS)

Brice, R.M.; Terrill, D.; Brice, R.M.

1991-01-01

The main control room (MCR) of any nuclear power plant can justifiably be called the most important area staffed by personnel in the entire facility. The interior workstation configuration, equipment arrangement, and staff placement all affect the efficiency and habitability of the room. There are many guidelines available that describe various human factor principles to use when upgrading the environment of the MCR. These involve anthropometric standards and rules for placement of peripheral equipment. Due to the variations in plant design, however, hard-and-fast rules have not and cannot be standardized for retrofits in any significant way. How then does one develop criteria for the improvement of a MCR? The purpose of this paper is to discuss, from the designer's point of view, a method for the collection of information, development of criteria, and creation of a final design for a MCR upgrade. This method is best understood by describing the successful implementation at Tennessee Valley Authority's Sequoyah nuclear plant

Adaptive Feed-Forward Control of Low Frequency Interior Noise

CERN Document Server

Kletschkowski, Thomas

2012-01-01

This book presents a mechatronic approach to Active Noise Control (ANC). It describes the required elements of system theory, engineering acoustics, electroacoustics and adaptive signal processing in a comprehensive, consistent and systematic manner using a unified notation. Furthermore, it includes a design methodology for ANC-systems, explains its application and describes tools to be used for ANC-system design. From the research point of view, the book presents new approaches to sound source localization in weakly damped interiors. One is based on the inverse finite element method, the other is based on a sound intensity probe with an active free field. Furthermore, a prototype of an ANC-system able to reach the physical limits of local (feed-forward) ANC is described. This is one example for applied research in ANC-system design. Other examples are given for (i) local ANC in a semi-enclosed subspace of an aircraft cargo hold and (ii) for the combination of audio entertainment with ANC.

System Cost Analysis for an Interior Permanent Magnet Motor

Energy Technology Data Exchange (ETDEWEB)

Peter Campbell

2008-08-01

The objective of this program is to provide an assessment of the cost structure for an interior permanent magnet ('IPM') motor which is designed to meet the 2010 FreedomCAR specification. The program is to evaluate the range of viable permanent magnet materials for an IPM motor, including sintered and bonded grades of rare earth magnets. The study considers the benefits of key processing steps, alternative magnet shapes and their assembly methods into the rotor (including magnetization), and any mechanical stress or temperature limits. The motor's costs are estimated for an annual production quantity of 200,000 units, and are broken out into such major components as magnetic raw materials, processing and manufacturing. But this is essentially a feasibility study of the motor's electromagnetic design, and is not intended to include mechanical or thermal studies as would be done to work up a selected design for production.

Interior seeding for the fabrication of single-grain REBCO bulk superconductors

International Nuclear Information System (INIS)

Kim, C-J; Park, S-D; Jun, B-H; Park, H-W

2016-01-01

This study presents a new seeding technique, named ‘interior seeding’ which allows the growth of a single REBCO (RE: rare-earth elements) grain in the interior of REBCO compacts. The key techniques of interior seeding are to provide appropriate open space for seeds in the interior of REBCO powder compacts to supply air or oxygen to the seeds, and to minimize the contact area between the seeds and liquid. The advantages of interior seeding are as follows: (1) simultaneous growth from the seed to the top and bottom of the REBCO compacts is possible, (2) fractions of the a-b growth sector and the a-c growth sector on the top surface can be controlled and (3) the top surfaces of the single-grain REBCO bulk superconductors are free from samarium or neodymium contamination from the used seeds. The very large single-grain Y 1.5 Ba 2 Cu 3 O 7−y (Y1.5) bulk superconductors (42 mm) were successfully fabricated using a melt growth (MG) process combined with interior seeding. Also, large-grain Y1.5 bulk superconductors (41 mm) with 〈110〉/〈110〉 and 〈100〉/〈100〉 grain junctions were fabricated using multiple interior seeding. In this paper, the detailed process of interior seeding, the development of top surface patterns and the properties of single-grain Y123 bulk superconductors fabricated using interior seeding were reported. (paper)

Measure Guideline: Installing Rigid Foam Insulation on the Interior of Existing Brick Walls

Energy Technology Data Exchange (ETDEWEB)

Natarajan, H.; Klocke, S.; Puttagunta, S.

2012-06-01

This measure guideline provides information on an effective method to insulate the interior of existing brick masonry walls with extruded polystyrene (XPS) insulation board. The guide outlines step-by-step design and installation procedures while explaining the benefits and tradeoffs where applicable. The authors intend that this document be useful to a varied audience that includes builders, remodelers, contractors and homeowners.

Measure Guideline. Installing Rigid Foam Insulation on the Interior of Existing Brick Walls

Energy Technology Data Exchange (ETDEWEB)

Natarajan, Hariharan [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States); Klocke, Steve [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States); Puttagunta, Srikanth [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States)

2012-06-01

This measure guideline provides information on an effective method to insulate the interior of existing brick masonry walls with extruded polystyrene (XPS) insulation board. The guide outlines step-by-step design and installation procedures while explaining the benefits and tradeoffs where applicable. The authors intend that this document be useful to a varied audience that includes builders,remodelers, contractors and homeowners.

Mood perception of interior colors in a gym

Science.gov (United States)

Ohno, Haruyo; Koizumi, Naoko

2002-06-01

When people enter a gym, they feel more like exercising in some cases than other cases. The interior color of the space may be a contributing factor. This paper discusses how the interior color of a gym affects female subjects in their twenties and forties to fifties both physiologically and psychologically.

Interior-Point Methods for Linear Programming: A Review

Science.gov (United States)

Singh, J. N.; Singh, D.

2002-01-01

The paper reviews some recent advances in interior-point methods for linear programming and indicates directions in which future progress can be made. Most of the interior-point methods belong to any of three categories: affine-scaling methods, potential reduction methods and central path methods. These methods are discussed together with…

Domus 1948-1978. La conformación del espacio interior doméstico a través del mobiliario

OpenAIRE

Capomaggi, Julia

2015-01-01

This research aims to develop a theory about how interior spaces have been shaped by the furniture in them, focusing on domestic interiors published in the magazine Domus during Gio Ponti’s second tenure as editor in chief (1948-1978). During this period, the magazine’s discourse focused on the concept of arredamento: the act of building a living space using furniture. The verb “to furnish” refers both to selecting furniture and to designing the relationship between the pieces. Th...

The interiors of the giant planets - 1983

International Nuclear Information System (INIS)

Smoluchowski, R.

1983-01-01

The last few years brought progress in understanding the interiors of the giant planets especially of the two larger ones which have been visited by Pioneer and Voyager spacecraft. An analysis of the formation of the giant planets also helped to clarify certain important common features. The presently available model of Jupiter is still based on certain somewhat bothersome approximations but it appears to satisfy the main observational constraints. Saturn's interior is much better understood than it was previously although the quantitative aspects of the role of the miscibility gap in the hydrogen-helium system have not yet been entirely resolved. Much attention has been directed at the interiors of Uranus and Neptune and the outstanding question appears to be the location and the amount of ices and methane present in their outer layers. Both the two- and the three-layer models are moderately successful. Serious difficulties arise from the considerable uncertainties concerning the rotational periods of both planets. Also the estimates of the internal heat fluxes and of the magnetic fields of both planets are not sufficiently certain. It is hoped that the forthcoming flyby of these two planets by a Voyager spacecraft will provide important new data for a future study of their interiors. (Auth.)

RESEARCH UTILIZATION IN THE DESIGN DECISION MAKING PROCESS

Directory of Open Access Journals (Sweden)

Amy Huber

2016-04-01

Full Text Available This article summarizes findings from a national survey of interior design practitioners in the United States (N=366.  The study explored interior design practitioners' current preferences for conducting project research including: activities conducted and sources used, attraction to and recall from sources, and ideas for communicating research findings. Responses suggest that interior designers do value research, yet have little time to utilize research. While cross-tabulation analyses indicate no major differences in research activities between the study’s demographic groups, collectively, only 12% of the sample indicated they utilized academic journals and, at times, even incorrectly identified those sources. Open-ended responses allowed designers to offer ideas for communicating research and four key themes emerged, including: topic selection and relevancy, ideas for new dissemination methods, ideas for presentation style, and perceptions of the written language used.  It is hoped that this study’s findings may help design researchers better communicate their own findings to design practitioners.

Interior microelectrolysis oxidation of polyester wastewater and its treatment technology

Energy Technology Data Exchange (ETDEWEB)

Yang Xiaoyi, E-mail: yangxiaoyi@buaa.edu.cn [Department of Thermal Energy Engineering, BeiHang University, Beijing 100191 (China)

2009-09-30

This paper has investigated the effects of interior microelectrolysis pretreatment on polyester wastewater treatment and analyzed its mechanism on COD and surfactant removal. The efficiency of interior microelectrolysis is mainly influenced by solution pH, aeration and reaction time. Contaminants can be removed not only by redox reaction and flocculation in the result of ferrous and ferric hydroxides but also by electrophoresis under electric fields created by electron flow. pH confirms the chemical states of surfactants, Fe(II)/Fe(III) ratio and the redox potential, and thus influences the effects of electrophoresis, flocculation and redox action on contaminant removal. Anaerobic and aerobic batch tests were performed to study the degradation of polyester wastewater. The results imply that interior microelectrolysis and anaerobic pretreatment are lacking of effectiveness if applied individually in treating polyester wastewater in spite of their individual advantages. The interior microelectrolysis-anaerobic-aerobic process was investigated to treat polyester wastewater with comparison with interior microelectrolysis-aerobic process and anaerobic-aerobic process. High COD removal efficiencies have been gotten by the combination of interior microelectrolysis with anaerobic technology and aerobic technology. The results also imply that only biological treatment was less effective in polyester wastewater treatment.

Interior microelectrolysis oxidation of polyester wastewater and its treatment technology

International Nuclear Information System (INIS)

Yang Xiaoyi

2009-01-01

This paper has investigated the effects of interior microelectrolysis pretreatment on polyester wastewater treatment and analyzed its mechanism on COD and surfactant removal. The efficiency of interior microelectrolysis is mainly influenced by solution pH, aeration and reaction time. Contaminants can be removed not only by redox reaction and flocculation in the result of ferrous and ferric hydroxides but also by electrophoresis under electric fields created by electron flow. pH confirms the chemical states of surfactants, Fe(II)/Fe(III) ratio and the redox potential, and thus influences the effects of electrophoresis, flocculation and redox action on contaminant removal. Anaerobic and aerobic batch tests were performed to study the degradation of polyester wastewater. The results imply that interior microelectrolysis and anaerobic pretreatment are lacking of effectiveness if applied individually in treating polyester wastewater in spite of their individual advantages. The interior microelectrolysis-anaerobic-aerobic process was investigated to treat polyester wastewater with comparison with interior microelectrolysis-aerobic process and anaerobic-aerobic process. High COD removal efficiencies have been gotten by the combination of interior microelectrolysis with anaerobic technology and aerobic technology. The results also imply that only biological treatment was less effective in polyester wastewater treatment.

Interior microelectrolysis oxidation of polyester wastewater and its treatment technology.

Science.gov (United States)

Yang, Xiaoyi

2009-09-30

This paper has investigated the effects of interior microelectrolysis pretreatment on polyester wastewater treatment and analyzed its mechanism on COD and surfactant removal. The efficiency of interior microelectrolysis is mainly influenced by solution pH, aeration and reaction time. Contaminants can be removed not only by redox reaction and flocculation in the result of ferrous and ferric hydroxides but also by electrophoresis under electric fields created by electron flow. pH confirms the chemical states of surfactants, Fe(II)/Fe(III) ratio and the redox potential, and thus influences the effects of electrophoresis, flocculation and redox action on contaminant removal. Anaerobic and aerobic batch tests were performed to study the degradation of polyester wastewater. The results imply that interior microelectrolysis and anaerobic pretreatment are lacking of effectiveness if applied individually in treating polyester wastewater in spite of their individual advantages. The interior microelectrolysis-anaerobic-aerobic process was investigated to treat polyester wastewater with comparison with interior microelectrolysis-aerobic process and anaerobic-aerobic process. High COD removal efficiencies have been gotten by the combination of interior microelectrolysis with anaerobic technology and aerobic technology. The results also imply that only biological treatment was less effective in polyester wastewater treatment.

Development of assembly techniques for fire resistant aircraft interior panels

Science.gov (United States)

Lee, S. C. S.

1978-01-01

Ten NASA Type A fire resistant aircraft interior panels were fabricated and tested to develop assembly techniques. These techiques were used in the construction of a full scale lavatory test structure for flame propagation testing. The Type A panel is of sandwich construction consisting of Nomex honeycomb filled with quinone dioxime foam, and bismaleimide/glass face sheets bonded to the core with polyimide film adhesive. The materials selected and the assembly techniques developed for the lavatory test structure were designed for obtaining maximum fire containment with minimum smoke and toxic emission.

Probing the Solar Interior

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 3; Issue 3. Probing the Solar Interior Hearing the Heartbeats of the Sun. Ashok Ambastha. General ... Author Affiliations. Ashok Ambastha1. Joint In-Charge Udaipur Solar Observatory Physical Research laboratory P.O. Box No. 198 Udaipur 313 001, India ...

Walking through Architectural Spaces: The Impact of Interior Forms on Human Brain Dynamics.

Science.gov (United States)

Banaei, Maryam; Hatami, Javad; Yazdanfar, Abbas; Gramann, Klaus

2017-01-01

Neuroarchitecture uses neuroscientific tools to better understand architectural design and its impact on human perception and subjective experience. The form or shape of the built environment is fundamental to architectural design, but not many studies have shown the impact of different forms on the inhabitants' emotions. This study investigated the neurophysiological correlates of different interior forms on the perceivers' affective state and the accompanying brain activity. To understand the impact of naturalistic three-dimensional (3D) architectural forms, it is essential to perceive forms from different perspectives. We computed clusters of form features extracted from pictures of residential interiors and constructed exemplary 3D room models based on and representing different formal clusters. To investigate human brain activity during 3D perception of architectural spaces, we used a mobile brain/body imaging (MoBI) approach recording the electroencephalogram (EEG) of participants while they naturally walk through different interior forms in virtual reality (VR). The results revealed a strong impact of curvature geometries on activity in the anterior cingulate cortex (ACC). Theta band activity in ACC correlated with specific feature types ( r s (14) = 0.525, p = 0.037) and geometry ( r s (14) = -0.579, p = 0.019), providing evidence for a role of this structure in processing architectural features beyond their emotional impact. The posterior cingulate cortex and the occipital lobe were involved in the perception of different room perspectives during the stroll through the rooms. This study sheds new light on the use of mobile EEG and VR in architectural studies and provides the opportunity to study human brain dynamics in participants that actively explore and realistically experience architectural spaces.

Walking through Architectural Spaces: The Impact of Interior Forms on Human Brain Dynamics

Directory of Open Access Journals (Sweden)

Maryam Banaei

2017-09-01

Full Text Available Neuroarchitecture uses neuroscientific tools to better understand architectural design and its impact on human perception and subjective experience. The form or shape of the built environment is fundamental to architectural design, but not many studies have shown the impact of different forms on the inhabitants’ emotions. This study investigated the neurophysiological correlates of different interior forms on the perceivers’ affective state and the accompanying brain activity. To understand the impact of naturalistic three-dimensional (3D architectural forms, it is essential to perceive forms from different perspectives. We computed clusters of form features extracted from pictures of residential interiors and constructed exemplary 3D room models based on and representing different formal clusters. To investigate human brain activity during 3D perception of architectural spaces, we used a mobile brain/body imaging (MoBI approach recording the electroencephalogram (EEG of participants while they naturally walk through different interior forms in virtual reality (VR. The results revealed a strong impact of curvature geometries on activity in the anterior cingulate cortex (ACC. Theta band activity in ACC correlated with specific feature types (rs (14 = 0.525, p = 0.037 and geometry (rs (14 = −0.579, p = 0.019, providing evidence for a role of this structure in processing architectural features beyond their emotional impact. The posterior cingulate cortex and the occipital lobe were involved in the perception of different room perspectives during the stroll through the rooms. This study sheds new light on the use of mobile EEG and VR in architectural studies and provides the opportunity to study human brain dynamics in participants that actively explore and realistically experience architectural spaces.

Pendokumentasian Aplikasi Ragam Hias Budaya Betawi pada Desain Interior Ruang Publik Café Betawi

Directory of Open Access Journals (Sweden)

Amarena Nediari

2015-07-01

Full Text Available Various ornaments of Indonesia come from the ethnic groups from all over the archipelago. Ornament is a tangible culture which has specific meaning and purposes. Its meaning does not change throughout the ages. Betawi culture has become cultural roots for most people in Jakarta which also as the capital city of Indonesia. Betawi culture is seen in a wide variety of dance, batik, decorative ornaments, and culinary. Betawi ornament can also be seen in the architecture and public areas since the geometrical shape is very easy to apply as interior element. The application of Betawi ornaments in a restaurant interior represents the idea of dining area in Betawi house. The study of Betawi ornaments was conducted by documentation of decorative elements in a restaurant as a public space. Objective of this research is to preserve various ornaments of Betawi culture. So that, the data can be valuable as an inspiration for designing restaurant interior with Betawi style. Generally, value of the ornaments has specific purposes related to Betawi’s cultural and social customs. Therefore, the application needs to consider more about the purpose of the symbol of the ornament. 

INTERIORITY - a prefab case study

DEFF Research Database (Denmark)

Hvejsel, Marie Frier

Dealing with the general theme of domestic architectural quality, the PhD thesis ‘INTERIORITY’ takes its point of departure in the continuous and increasing need to improve our capability as architects to theoretically articulate the intangible concept of quality, and to reveal it through an active...... been motivated by the particular hypothesis that an introduction of the notion of interiority, as an ability of the spatial envelope itself to address the sensuous scale of furniture, unfolds a particular dual critical potential signifying our experience of domestic architectural quality: On the one......, tectonically. Hence, it has been a particular idea of the study to explore the relation between furniture, the spatial envelope itself, and its construct by using furniture as an architectural concept. Consequently, the thesis has specifically investigated whether this notion of interiority, describing...

Entropy corresponding to the interior of a Schwarzschild black hole

Directory of Open Access Journals (Sweden)

Bibhas Ranjan Majhi

2017-07-01

Full Text Available Interior volume within the horizon of a black hole is a non-trivial concept which turns out to be very important to explain several issues in the context of quantum nature of black hole. Here we show that the entropy, contained by the maximum interior volume for massless modes, is proportional to the Bekenstein–Hawking expression. The proportionality constant is less than unity implying the horizon bears maximum entropy than that by the interior. The derivation is very systematic and free of any ambiguity. To do so the precise value of the energy of the modes, living in the interior, is derived by constraint analysis. Finally, the implications of the result are discussed.

Entropy corresponding to the interior of a Schwarzschild black hole

Science.gov (United States)

Majhi, Bibhas Ranjan; Samanta, Saurav

2017-07-01

Interior volume within the horizon of a black hole is a non-trivial concept which turns out to be very important to explain several issues in the context of quantum nature of black hole. Here we show that the entropy, contained by the maximum interior volume for massless modes, is proportional to the Bekenstein-Hawking expression. The proportionality constant is less than unity implying the horizon bears maximum entropy than that by the interior. The derivation is very systematic and free of any ambiguity. To do so the precise value of the energy of the modes, living in the interior, is derived by constraint analysis. Finally, the implications of the result are discussed.

Integration of Models of Building Interiors with Cadastral Data

Directory of Open Access Journals (Sweden)

Gotlib Dariusz

2017-12-01

Full Text Available Demands for applications which use models of building interiors is growing and highly diversified. Those models are applied at the stage of designing and construction of a building, in applications which support real estate management, in navigation and marketing systems and, finally, in crisis management and security systems. They are created on the basis of different data: architectural and construction plans, both, in the analogue form, as well as CAD files, BIM data files, by means of laser scanning (TLS and conventional surveys. In this context the issue of searching solutions which would integrate the existing models and lead to elimination of data redundancy is becoming more important. The authors analysed the possible input- of cadastral data (legal extent of premises at the stage of the creation and updating different models of building’s interiors. The paper focuses on one issue - the way of describing the geometry of premises basing on the most popular source data, i.e. architectural and construction plans. However, the described rules may be considered as universal and also may be applied in practice concerned may be used during the process of creation and updating indoor models based on BIM dataset or laser scanning clouds

Interior Alaska Bouguer Gravity Anomaly

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — A 1 kilometer Complete Bouguer Anomaly gravity grid of interior Alaska. Only those grid cells within 10 kilometers of a gravity data point have gravity values....

Interior acoustic cloak

OpenAIRE

Wael Akl; A. Baz

2014-01-01

Acoustic cloaks have traditionally been intended to externally surround critical objects to render these objects acoustically invisible. However, in this paper, the emphasis is placed on investigating the application of the acoustic cloaks to the interior walls of acoustic cavities in an attempt to minimize the noise levels inside these cavities. In this manner, the acoustic cloaks can serve as a viable and efficient alternative to the conventional passive noise attenuation treatments which a...

Sensorless interior permanent magnet synchronous motor control with rotational inertia adjustment

Directory of Open Access Journals (Sweden)

Yongle Mao

2016-12-01

Full Text Available Mechanical model is generally required in high dynamic sensorless motor control schemes for zero phase lag estimation of rotor position and speed. However, the rotational inertia uncertainty will cause dynamic estimation errors, eventually resulting in performance deterioration of the sensorless control system. Therefore, this article proposes a high dynamic performance sensorless control strategy with online adjustment of the rotational inertia. Based on a synthetic back electromotive force model, the voltage equation of interior permanent magnet synchronous motor is transformed to that of an equivalent non-salient permanent magnet synchronous motor. Then, an extended nonlinear observer is designed for interior permanent magnet synchronous motor in the stator-fixed coordinate frame, with rotor position, speed and load torque simultaneously estimated. The effect of inaccurate rotational inertia on the estimation of rotor position and speed is investigated, and a novel rotational inertia adjustment approach that employs the gradient descent algorithm is proposed to suppress the dynamic estimation errors. The effectiveness of the proposed control strategy is demonstrated by experimental tests.

Interior Alaska Bouguer Gravity Anomaly

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — A 1 kilometer Complete Bouguer Anomaly gravity grid of interior Alaska. All grid cells within the rectangular data area (from 61 to 66 degrees North latitude and...

Hot-start Giant Planets Form with Radiative Interiors

Energy Technology Data Exchange (ETDEWEB)

Berardo, David; Cumming, Andrew, E-mail: david.berardo@mcgill.ca, E-mail: andrew.cumming@mcgill.ca [Department of Physics and McGill Space Institute, McGill University, 3600 rue University, Montreal, QC H3A 2T8 (Canada)

2017-09-10

In the hot-start core accretion formation model for gas giants, the interior of a planet is usually assumed to be fully convective. By calculating the detailed internal evolution of a planet assuming hot-start outer boundary conditions, we show that such a planet will in fact form with a radially increasing internal entropy profile, so that its interior will be radiative instead of convective. For a hot outer boundary, there is a minimum value for the entropy of the internal adiabat S {sub min} below which the accreting envelope does not match smoothly onto the interior, but instead deposits high entropy material onto the growing interior. One implication of this would be to at least temporarily halt the mixing of heavy elements within the planet, which are deposited by planetesimals accreted during formation. The compositional gradient this would impose could subsequently disrupt convection during post-accretion cooling, which would alter the observed cooling curve of the planet. However, even with a homogeneous composition, for which convection develops as the planet cools, the difference in cooling timescale will change the inferred mass of directly imaged gas giants.

Interior Gradient Estimates for Nonuniformly Parabolic Equations II

Directory of Open Access Journals (Sweden)

Lieberman Gary M

2007-01-01

Full Text Available We prove interior gradient estimates for a large class of parabolic equations in divergence form. Using some simple ideas, we prove these estimates for several types of equations that are not amenable to previous methods. In particular, we have no restrictions on the maximum eigenvalue of the coefficient matrix and we obtain interior gradient estimates for so-called false mean curvature equation.

Self-assembled monolayers of shape-persistent macrocycles on graphite: interior design and conformational polymorphism.

Science.gov (United States)

Vollmeyer, Joscha; Eberhagen, Friederike; Höger, Sigurd; Jester, Stefan-S

2014-01-01

Three shape-persistent naphthylene-phenylene-acetylene macrocycles of identical backbone structures and extraannular substitution patterns but different (empty, apolar, polar) nanopore fillings are self-assembled at the solid/liquid interface of highly oriented pyrolytic graphite and 1,2,4-trichlorobenzene. Submolecularly resolved images of the resulting two-dimensional (2D) crystalline monolayer patterns are obtained by in situ scanning tunneling microscopy. A concentration-dependent conformational polymorphism is found, and open and more dense packing motifs are observed. For all three compounds alike lattice parameters are found, therefore the intermolecular macrocycle distances are mainly determined by their size and symmetry. This is an excellent example that the graphite acts as a template for the macrocycle organization independent from their specific interior.

Self-assembled monolayers of shape-persistent macrocycles on graphite: interior design and conformational polymorphism

Directory of Open Access Journals (Sweden)

Joscha Vollmeyer

2014-11-01

Full Text Available Three shape-persistent naphthylene–phenylene–acetylene macrocycles of identical backbone structures and extraannular substitution patterns but different (empty, apolar, polar nanopore fillings are self-assembled at the solid/liquid interface of highly oriented pyrolytic graphite and 1,2,4-trichlorobenzene. Submolecularly resolved images of the resulting two-dimensional (2D crystalline monolayer patterns are obtained by in situ scanning tunneling microscopy. A concentration-dependent conformational polymorphism is found, and open and more dense packing motifs are observed. For all three compounds alike lattice parameters are found, therefore the intermolecular macrocycle distances are mainly determined by their size and symmetry. This is an excellent example that the graphite acts as a template for the macrocycle organization independent from their specific interior.

The Interior Columbia Basin Ecosystem Management Project: scientific assessment.

Science.gov (United States)

1999-01-01

This CD-ROM contains digital versions (PDF) of the major scientific documents prepared for the Interior Columbia Basin Ecosystem Management Project (ICBEMP). "A Framework for Ecosystem Management in the Interior Columbia Basin and Portions of the Klamath and Great Basins" describes a general planning model for ecosystem management. The "Highlighted...

Diagonally arranged louvers in integrated facade systems - effects on the interior lighting environment

Directory of Open Access Journals (Sweden)

Yutaka Misawa

2015-06-01

Full Text Available Building facades play an important role in creating the urban landscape and they can be used effectively to reduce energy usage and environmental impacts, while also incorporating structural seismic-resistant elements in the building perimeter zone. To address these opportunities, the authors propose an integrated facade concept which satisfies architectural facade and environmental design requirements. In Europe, remarkable facade engineering developments have taken place over the last two decades resulting in elegant facades and a reduction in environmental impact; however modifications are needed in Japan to take account of the different seismic and environmental situations. To satisfy these requirements, this paper proposes the use of a diagonally disposed louver system. Diagonally arranged louvers have the potential to provide both seismic resistance and environment adaptation. In many cases, louvers have been designed but not installed due to concerns relating to restricted external sight lines and low levels of natural lighting in the building interior. To overcome these problems, full-scale diagonally arranged louver mock-ups were created to evaluate illumination levels, the quality of the internal daylight environment and external appearance. Interior illumination levels resulting from a series of mock-up experiments were evaluated and correlated with results from a daylight analysis tool.

Asymmetric interiors for small black holes

Energy Technology Data Exchange (ETDEWEB)

Kabat, Daniel [Department of Physics and Astronomy, Lehman College,City University of New York, Bronx NY 10468 (United States); Lifschytz, Gilad [Department of Mathematics, Faculty of Natural Science,University of Haifa, Haifa 31905 (Israel)

2016-08-16

We develop the representation of infalling observers and bulk fields in the CFT as a way to understand the black hole interior in AdS. We first discuss properties of CFT states which are dual to black holes. We then show that in the presence of a Killing horizon bulk fields can be decomposed into pieces we call ingoing and outgoing. The ingoing field admits a simple operator representation in the CFT, even inside a small black hole at late times, which leads to a simple CFT description of infalling geodesics. This means classical infalling observers will experience the classical geometry in the interior. The outgoing piece of the field is more subtle. In an eternal two-sided geometry it can be represented as an operator on the left CFT. In a stable one-sided geometry it can be described using entanglement via the PR construction. But in an evaporating black hole trans-horizon entanglement breaks down at the Page time, which means that for old black holes the PR construction fails and the outgoing field does not see local geometry. This picture of the interior allows the CFT to reconcile unitary Hawking evaporation with the classical experience of infalling observers.

Design funcional de vestuário interior

OpenAIRE

Soutinho, Hélder Filipe Cunha

2006-01-01

Dissertação de Mestrado em Design e Marketing Actualmente, a competitividade do sector têxtil é determinada essencialmente pela capacidade de compreender e reagir às necessidades dos seus clientes. Neste contexto, pode-se afirmar que a indústria têxtil se encontra no meio de uma segunda revolução industrial, que assume proporções globais. Assim, o aparecimento das chamadas fibras funcionais tem contribuído decisivamente para o estabelecimento de novas fronteiras de utilização dos produtos ...

Sustainable Design Re-Examined: Integrated Approach to Knowledge Creation for Sustainable Interior Design

Science.gov (United States)

Lee, Young S.

2014-01-01

The article focuses on a systematic approach to the instructional framework to incorporate three aspects of sustainable design. It also aims to provide an instruction model for sustainable design stressing a collective effort to advance knowledge creation as a community. It develops a framework conjoining the concept of integrated process in…

International style interior in the historical steam power plant in Žilina

Directory of Open Access Journals (Sweden)

Grúňová Zuzana

2016-01-01

Full Text Available The article deals with one of the examples of good interior design in Slovak functionalist architecture uncovered during recent restorational research (2016. It points out that even provincial, small but growing town, which Žilina in the northern Slovakia region was at that time, can be a place of high-quality implementation of aesthetically valuable and structurally developed architectural design. The high level of composition, choice of color scheme, quality of materials and attention to detail prove the fact, that the architect František Bednárik mastered to apply international style ideas also to a small extent reconstruction of the original steam power plant in Žilina.

Space Station Freedom pressurized element interior design process

Science.gov (United States)

Hopson, George D.; Aaron, John; Grant, Richard L.

1990-01-01

The process used to develop the on-orbit working and living environment of the Space Station Freedom has some very unique constraints and conditions to satisfy. The goal is to provide maximum efficiency and utilization of the available space, in on-orbit, zero G conditions that establishes a comfortable, productive, and safe working environment for the crew. The Space Station Freedom on-orbit living and working space can be divided into support for three major functions: (1) operations, maintenance, and management of the station; (2) conduct of experiments, both directly in the laboratories and remotely for experiments outside the pressurized environment; and (3) crew related functions for food preparation, housekeeping, storage, personal hygiene, health maintenance, zero G environment conditioning, and individual privacy, and rest. The process used to implement these functions, the major requirements driving the design, unique considerations and constraints that influence the design, and summaries of the analysis performed to establish the current configurations are described. Sketches and pictures showing the layout and internal arrangement of the Nodes, U.S. Laboratory and Habitation modules identify the current design relationships of the common and unique station housekeeping subsystems. The crew facilities, work stations, food preparation and eating areas (galley and wardroom), and exercise/health maintenance configurations, waste management and personal hygiene area configuration are shown. U.S. Laboratory experiment facilities and maintenance work areas planned to support the wide variety and mixtures of life science and materials processing payloads are described.

Simulation on a car interior aerodynamic noise control based on statistical energy analysis

Science.gov (United States)

Chen, Xin; Wang, Dengfeng; Ma, Zhengdong

2012-09-01

How to simulate interior aerodynamic noise accurately is an important question of a car interior noise reduction. The unsteady aerodynamic pressure on body surfaces is proved to be the key effect factor of car interior aerodynamic noise control in high frequency on high speed. In this paper, a detail statistical energy analysis (SEA) model is built. And the vibra-acoustic power inputs are loaded on the model for the valid result of car interior noise analysis. The model is the solid foundation for further optimization on car interior noise control. After the most sensitive subsystems for the power contribution to car interior noise are pointed by SEA comprehensive analysis, the sound pressure level of car interior aerodynamic noise can be reduced by improving their sound and damping characteristics. The further vehicle testing results show that it is available to improve the interior acoustic performance by using detailed SEA model, which comprised by more than 80 subsystems, with the unsteady aerodynamic pressure calculation on body surfaces and the materials improvement of sound/damping properties. It is able to acquire more than 2 dB reduction on the central frequency in the spectrum over 800 Hz. The proposed optimization method can be looked as a reference of car interior aerodynamic noise control by the detail SEA model integrated unsteady computational fluid dynamics (CFD) and sensitivity analysis of acoustic contribution.

Quantum state of the black hole interior

International Nuclear Information System (INIS)

Brustein, Ram; Medved, A.J.M.

2015-01-01

If a black hole (BH) is initially in an approximately pure state and it evaporates by a unitary process, then the emitted radiation will be in a highly quantum state. As the purifier of this radiation, the state of the BH interior must also be in some highly quantum state. So that, within the interior region, the mean-field approximation cannot be valid and the state of the BH cannot be described by some semiclassical metric. On this basis, we model the state of the BH interior as a collection of a large number of excitations that are packed into closely spaced but single-occupancy energy levels; a sort-of “Fermi sea” of all light-enough particles. This highly quantum state is surrounded by a semiclassical region that lies close to the horizon and has a non-vanishing energy density. It is shown that such a state looks like a BH from the outside and decays via gravitational pair production in the near-horizon region at a rate that agrees with the Hawking rate. We also consider the fate of a classical object that has passed through to the BH interior and show that, once it has crossed over the near-horizon threshold, the object meets its demise extremely fast. This result cannot be attributed to a “firewall”, as the trauma to the in-falling object only begins after it has passed through the near-horizon region and enters a region where semiclassical spacetime ends but the energy density is still parametrically smaller than Planckian.

On the complexity of a combined homotopy interior method for convex programming

Science.gov (United States)

Yu, Bo; Xu, Qing; Feng, Guochen

2007-03-01

In [G.C. Feng, Z.H. Lin, B. Yu, Existence of an interior pathway to a Karush-Kuhn-Tucker point of a nonconvex programming problem, Nonlinear Anal. 32 (1998) 761-768; G.C. Feng, B. Yu, Combined homotopy interior point method for nonlinear programming problems, in: H. Fujita, M. Yamaguti (Eds.), Advances in Numerical Mathematics, Proceedings of the Second Japan-China Seminar on Numerical Mathematics, Lecture Notes in Numerical and Applied Analysis, vol. 14, Kinokuniya, Tokyo, 1995, pp. 9-16; Z.H. Lin, B. Yu, G.C. Feng, A combined homotopy interior point method for convex programming problem, Appl. Math. Comput. 84 (1997) 193-211.], a combined homotopy was constructed for solving non-convex programming and convex programming with weaker conditions, without assuming the logarithmic barrier function to be strictly convex and the solution set to be bounded. It was proven that a smooth interior path from an interior point of the feasible set to a K-K-T point of the problem exists. This shows that combined homotopy interior point methods can solve the problem that commonly used interior point methods cannot solveE However, so far, there is no result on its complexity, even for linear programming. The main difficulty is that the objective function is not monotonically decreasing on the combined homotopy path. In this paper, by taking a piecewise technique, under commonly used conditions, polynomiality of a combined homotopy interior point method is given for convex nonlinear programming.

Interior near-field acoustical holography in flight.

Science.gov (United States)

Williams, E G; Houston, B H; Herdic, P C; Raveendra, S T; Gardner, B

2000-10-01

In this paper boundary element methods (BEM) are mated with near-field acoustical holography (NAH) in order to determine the normal velocity over a large area of a fuselage of a turboprop airplane from a measurement of the pressure (hologram) on a concentric surface in the interior of the aircraft. This work represents the first time NAH has been applied in situ, in-flight. The normal fuselage velocity was successfully reconstructed at the blade passage frequency (BPF) of the propeller and its first two harmonics. This reconstructed velocity reveals structure-borne and airborne sound-transmission paths from the engine to the interior space.

Recording and Modelling of MONUMENTS' Interior Space Using Range and Optical Sensors

Science.gov (United States)

Georgiadis, Charalampos; Patias, Petros; Tsioukas, Vasilios

2016-06-01

Three dimensional modelling of artefacts and building interiors is a highly active research field in our days. Several techniques are being utilized to perform such a task, spanning from traditional surveying techniques and photogrammetry to structured light scanners, laser scanners and so on. New technological advancements in both hardware and software create new recording techniques, tools and approaches. In this paper we present a new recording and modelling approach based on the SwissRanger SR4000 range camera coupled with a Canon 400D dSLR camera. The hardware component of our approach consists of a fixed base, which encloses the range and SLR cameras. The two sensors are fully calibrated and registered to each other thus we were able to produce colorized point clouds acquired from the range camera. In this paper we present the initial design and calibration of the system along with experimental data regarding the accuracy of the proposed approach. We are also providing results regarding the modelling of interior spaces and artefacts accompanied with accuracy tests from other modelling approaches based on photogrammetry and laser scanning.

Interior Noise Prediction of the Automobile Based on Hybrid FE-SEA Method

Directory of Open Access Journals (Sweden)

S. M. Chen

2011-01-01

created using hybrid FE-SEA method. The modal density was calculated using analytical method and finite element method; the damping loss factors of the structural and acoustic cavity subsystems were also calculated with analytical method; the coupling loss factors between structure and structure, structure and acoustic cavity were both calculated. Four different kinds of excitations including road excitations, engine mount excitations, sound radiation excitations of the engine, and wind excitations are exerted on the body of automobile when the automobile is running on the road. All the excitations were calculated using virtual prototype technology, computational fluid dynamics (CFD, and experiments realized in the design and development stage. The interior noise of the automobile was predicted and verified at speed of 120 km/h. The predicted and tested overall SPLs of the interior noise were 73.79 and 74.44 dB(A respectively. The comparison results also show that the prediction precision is satisfied, and the effectiveness and reliability of the hybrid FE-SEA model of the automobile is verified.

RAGAM HIAS PADA INTERIOR ARSITEKTUR MASJID ASTANA SULTAN HADLIRIN MANTINGAN, KECAMATAN TAHUNAN KABUPATEN JEPARA

Directory of Open Access Journals (Sweden)

Gunawan -

2015-08-01

Full Text Available Masjid Mantingan memiliki keunikan-keunikan ragam hias pada interior arsitektural, yang jarang ditemui di masjid-masjid lain di Indonesia. Atas dasar hal tersebut, maka permasalahan penelitian ini : (1 Bagaimana rancangan ruang  Masjid Mantingan?; (2 Apa saja dan bagaimana ragam hias dinding yang ada dalam desain interior ruang Masjid Mantingan, Jepara?; dan (3 Bagaimana estetika dan makna ragam hias pada ruang Masjid Mantingan, Jepara? Dalam penelitian ini data primernya adalah Arsitek Masjid Mantingan, sedangan data sekundernya adalah berbagai kepustakaan, berupa buku, jurnal, koran, dan majalah. Pengumpulan data dilakukan dengan : obsevasi / pengamatan; wawancara; studi dokumen. Metode Pemeriksaan Keabsahan Data:Trianggulasi sumber; dan Triangulasi metode. Teknik Analisis Data:Reduksi data. Penyajian data. Menarik kesimpulan/verifikasi. Ukiran pada dinding Masjid yang terbuat dari batu padas kuning bermotif Cina, banyak terdapat ukir-ukiran dan rumah-rumahan yang bercorak Cina. Mantingan Mosque extravagance decoration on the interior architecture, which is rarely found in other mosques in Indonesia. The uniqueness of the decoration on the interior architecture Mantingan mosque is also not out of the histori city of the surrounding conditions. With a variety of uniqueness and historical values that surrounded it. On the basis of this, there search is taking the problem: (1 How does the structure of mosque architecture Mantingan?; (2 How does a decorative wall in the form of interior design form Mantingan Mosque, Jepara? ; and (3 How decorative and architectural significance Mantingan Mosque reflect acculturation? In this study the data were Architect Mantingan Mosque primary, while secondary data is a wide range of literature, such as : books, journals, newspapers, and magazines. Data Collection: kinds of observations/Observations; interview; Study Document. Examination Methods Data Validity : Triangulation source; dan Triangulasi methods

Pengaruh Elemen Interior Restoran terhadap Pengalaman Nostalgia Konsumen

Directory of Open Access Journals (Sweden)

Miranti Sari Rahma

2017-09-01

Full Text Available Selama beberapa tahun terakhir, restoran bertema "nostalgia" menjadi populer di Bandung. Penelitian ini bertujuan untuk mengeksplorasi unsur-unsur lingkungan yang disukai konsumen di restoran yang dapat mempengaruhi respon pengalaman nostalgia konsumen di restoran. Penelitian ini menggunakan metode deskriptif eksploratif untuk menentukan variabel yang dapat digunakan sebagai stimulus eksperimen berikutnya guna mendapatkan respon persepsi, emosi, dan sikap. Data hasil eksperimen dianalisis menggunakan ANOVA, menunjukkan bahwa (1 elemen interior restoran yang paling mempengaruhi pengalaman nostalgia konsumen di restoran; (2 meskipun gaya modern dapat membangkitkan respon persepsi, emosi dan sikap nostalgia, elemen dekoratif dan furnitur kolonial paling efektif dapat membangkitkan pengalaman nostalga; (3 ditemukan juga hubungan antara persepsi, emosi, dan sikap kaitannya dengan proses persepsi, emosi dapat mempengaruhi sikap konsumen di restoran, hal ini sejalan dengan mekanisme persepsi dimana kontribusi pengalaman masa lalu dapat membangkitkan emosi sehingga mempengaruhi persepsi dan munculnya sikap konsumen di restoran. Effect of Restaurant Interior Elements on Consumer Nostalgic Experience Abstract. In the last few years, ‘nostalgic’ restaurants have become quite popular in Bandung. This study was aimed at exploring interior elements that may evoke a nostalgic experience in consumers in a restaurant. In this study, an exploratory descriptive method was applied to determine the variables to be used as stimulus in the experiment to get perception, emotion, and attitude responses. The data of this research were analyzed by ANOVA and showed that: (1 interior elements of the restaurant influenced the nostalgic experience by consumers; (2 colonial decorative elements and colonial style furniture, even if other interior elements have a modern style, can evoke nostalgic perceptions, emotions, and attitudes; (3 a link was found between perceptions

Implementasi Konsep Desain Partisipasi Pada Interior Ruang Terapi Perilaku Anak Autis Dengan Menggunakan Metoda Aba/lovass

OpenAIRE

Sari, Sriti Mayang

2011-01-01

The concept of participation design in the interior of a therapy room for autistic behavior in children truly considers the character of children with autism and methods of therapy used so that the criteria and the embodiment of space can meet the demands of autistic children. The physical environment that is suitable with the condition of the user can bring great influence to the therapy activities. The purpose of this research is to implement the design concept of participation as the basis...

Studi Gaya Vintage Pada Interior Cafe Di Surabaya. (Studi Kasus : Canary Cafe, DailySweet Cafe Dan Stilrod Cafe)

OpenAIRE

Mariana Wibowo, Lia Monica Tejo

2014-01-01

Research studies is about the application of vintage style in some cafe in Surabaya aims to determine the application of vintage design styles contained in the interior of the cafe Carpentier Kitchen , Canary Cafe , Daily Sweet Cafe , and Stilroad Cafe . Research studies of vintage style design will be carried out in Surabaya with a case study that some cafe in Surabaya that meets the criteria of vintage design styles , including the Carpentier Kitchen , Canary Cafe , Daily Sweet Cafe , and S...

Interior design and accessibility aspects of the Superbus

NARCIS (Netherlands)

Terzi, A.; Van Deelen, J.; Ockels, W.J.

2007-01-01

The Superbus (Fig.1) is a new public transport vehicle designed for comfortable, flexible and sustainable transportation. The Superbus, which drives at 250 km/h cruising speed on its dedicated infrastructures (the supertrack) and at conventional speed on existing roads, is safe, sustainable, and

A Rule Based Approach to ISS Interior Volume Control and Layout

Science.gov (United States)

Peacock, Brian; Maida, Jim; Fitts, David; Dory, Jonathan

2001-01-01

Traditional human factors design involves the development of human factors requirements based on a desire to accommodate a certain percentage of the intended user population. As the product is developed human factors evaluation involves comparison between the resulting design and the specifications. Sometimes performance metrics are involved that allow leniency in the design requirements given that the human performance result is satisfactory. Clearly such approaches may work but they give rise to uncertainty and negotiation. An alternative approach is to adopt human factors design rules that articulate a range of each design continuum over which there are varying outcome expectations and interactions with other variables, including time. These rules are based on a consensus of human factors specialists, designers, managers and customers. The International Space Station faces exactly this challenge in interior volume control, which is based on anthropometric, performance and subjective preference criteria. This paper describes the traditional approach and then proposes a rule-based alternative. The proposed rules involve spatial, temporal and importance dimensions. If successful this rule-based concept could be applied to many traditional human factors design variables and could lead to a more effective and efficient contribution of human factors input to the design process.

Design It Yourself Surabaya: Reflective Notes on Designing a Festival

Directory of Open Access Journals (Sweden)

Kathleen Azali

2016-08-01

Full Text Available As a relatively new, imported word, the term desain (design in Indonesian is still mostly understood within its relations to three common academic fields—graphic, interior, and product design—and thus tends to be viewed as belonging to the ‘merely’ visual. While local cultural events and festivals have proliferated in Indonesia, the scope for a conference or a festival that explicitly address design therefore tends to be rather limited. This is not to say that design exhibitions and festivals do not exist. In fact, they have flourished in the country, particularly among university students, reflecting the growth of university design programs and schools to meet contemporary demand. Yet visual-based, market-led development has not been accompanied by institutional development in research and outreach (in the form of dialogues or critical publications, particularly ones that connect that development across different fields. Attaching the word desain to an event in Indonesia invariably means it is associated with either design student exhibitions, or an industrial expo showcasing printers or interior furnitures. This curated piece emerges as our reflection on designing—cobbling up, and calibrating—a design conference-festival from Surabaya, East Java, Indonesia in light of the national context in which desain is received and made meaningful.

A smartphone photogrammetry method for digitizing prosthetic socket interiors.

Science.gov (United States)

Hernandez, Amaia; Lemaire, Edward

2017-04-01

Prosthetic CAD/CAM systems require accurate 3D limb models; however, difficulties arise when working from the person's socket since current 3D scanners have difficulties scanning socket interiors. While dedicated scanners exist, they are expensive and the cost may be prohibitive for a limited number of scans per year. A low-cost and accessible photogrammetry method for socket interior digitization is proposed, using a smartphone camera and cloud-based photogrammetry services. 15 two-dimensional images of the socket's interior are captured using a smartphone camera. A 3D model is generated using cloud-based software. Linear measurements were comparing between sockets and the related 3D models. 3D reconstruction accuracy averaged 2.6 ± 2.0 mm and 0.086 ± 0.078 L, which was less accurate than models obtained by high quality 3D scanners. However, this method would provide a viable 3D digital socket reproduction that is accessible and low-cost, after processing in prosthetic CAD software. Clinical relevance The described method provides a low-cost and accessible means to digitize a socket interior for use in prosthetic CAD/CAM systems, employing a smartphone camera and cloud-based photogrammetry software.

Connecting horizon pixels and interior voxels of a black hole

International Nuclear Information System (INIS)

Nicolini, Piero; Singleton, Douglas

2014-01-01

In this paper we discuss to what extent one can infer details of the interior structure of a black hole based on its horizon. Recalling that black hole thermal properties are connected to the non-classical nature of gravity, we circumvent the restrictions of the no-hair theorem by postulating that the black hole interior is singularity free due to violations of the usual energy conditions. Further these conditions allow one to establish a one-to-one, holographic projection between Planckian areal “bits” on the horizon and “voxels”, representing the gravitational degrees of freedom in the black hole interior. We illustrate the repercussions of this idea by discussing an example of the black hole interior consisting of a de Sitter core postulated to arise from the local graviton quantum vacuum energy. It is shown that the black hole entropy can emerge as the statistical entropy of a gas of voxels

Self-reported difficulty and preferences of wheeled mobility device users for simulated low-floor bus boarding, interior circulation and disembarking.

Science.gov (United States)

D'Souza, Clive; Paquet, Victor L; Lenker, James A; Steinfeld, Edward

2017-11-13

Low ridership of public transit buses among wheeled mobility device users suggests the need to identify vehicle design conditions that are either particularly accommodating or challenging. The objective of this study was to determine the effects of low-floor bus interior seating configuration and passenger load on wheeled mobility device user-reported difficulty, overall acceptability and design preference. Forty-eight wheeled mobility users evaluated three interior design layouts at two levels of passenger load (high vs. low) after simulating boarding and disembarking tasks on a static full-scale low-floor bus mockup. User self-reports of task difficulty, acceptability and design preference were analyzed across the different test conditions. Ramp ascent was the most difficult task for manual wheelchair users relative to other tasks. The most difficult tasks for users of power wheelchairs and scooters were related to interior circulation, including moving to the securement area, entry and positioning in the securement area and exiting the securement area. Boarding and disembarking at the rear doorway was significantly more acceptable and preferred compared to the layouts with front doorways. Understanding transit usability barriers, perceptions and preferences among wheeled mobility users is an important consideration for clinicians who recommend mobility-related device interventions to those who use public transportation. Implications for Rehabilitation In order to maximize community participation opportunities for wheeled mobility users, clinicians should consider potential public transit barriers during the processes of wheelchair device selection and skills training. Usability barriers experienced by wheeled mobility device users on transit vehicles differ by mobility device type and vehicle configurations. Full-scale environment simulations are an effective means of identifying usability barriers and design needs in people with mobility impairments and may

Experimental and theoretical sound transmission. [reduction of interior noise in aircraft

Science.gov (United States)

Roskam, J.; Muirhead, V. U.; Smith, H. W.; Durenberger, D. W.

1978-01-01

The capabilities of the Kansas University- Flight Research Center for investigating panel sound transmission as a step toward the reduction of interior noise in general aviation aircraft were discussed. Data obtained on panels with holes, on honeycomb panels, and on various panel treatments at normal incidence were documented. The design of equipment for panel transmission loss tests at nonnormal (slanted) sound incidence was described. A comprehensive theory-based prediction method was developed and shows good agreement with experimental observations of the stiffness controlled, the region, the resonance controlled region, and the mass-law region of panel vibration.

Dwelling with design

OpenAIRE

Paavilainen, Heidi

2013-01-01

Dwelling with Design offers a throughout look at the domestic meanings of design. The research is based on studying households in and around Helsinki, in order to find out what role, if any, design plays in the domestication of a product. The picture emerging from the research is quite different from design’s public and professional image represented for example in the interior decoration magazines, where designed qualities such as usability, reliability, interesting branding and aesthetic co...

How Store Design Affect the Consumer Evaluation of Fashion Items

DEFF Research Database (Denmark)

Münster, Mia Borch; Kristensen, Tore; Gabrielsen, Gorm

specially designed to match the style of each sub-brand. The interiors of the three shops are analysed and compared. To study the individual responses, data were collected on an iPad using a method building on paired comparisons. The experiment shows how 40 participants rate six products in three different...... shops, and in some cases the study of the room and the product made a surprising match. The results show that the products were not rated higher when presented in the interior designed for the specific sub-brand. However, when looking at the favourite products of the participants, it turned out...... that the majority of the highly rated products were given in one specific room, which does simply that the interior design influenced the consumers when rating their favourite products....

Reflective coatings for interior and exterior of buildings and improving thermal performance

International Nuclear Information System (INIS)

Joudi, Ali; Svedung, Harald; Cehlin, Mathias; Rönnelid, Mats

2013-01-01

Highlights: ► Increase building energy efficiency by optimizing surface optical properties. ► Study different scenarios with both interior and exterior reflective coatings. ► Combined thermal effect of both interior and exterior reflective coatings. -- Abstract: The importance of reducing building energy usage and thriving for more energy efficient architectures, has nurtured creative solutions and smart choices of materials in the last few decades. Among those are optimizing surface optical properties for both interior and exterior claddings of the building. Development in the coil-coating steel industries has now made it possible to allocate correct optical properties for steel clad buildings with improved thermal performance. Although the importance of the exterior coating and solar gain are thoroughly studied in many literatures, the effect of interior cladding are less tackled, especially when considering a combination of both interior and exterior reflective coatings. This paper contemplates the thermal behavior of small cabins with reflective coatings on both interior and exterior cladding, under different conditions and climates with the aim to clarify and point out to the potential energy saving by smart choices of clad coatings.

New research directions in flexural member failure at an interior support (Interaction of web crippling and bending moment)

NARCIS (Netherlands)

Hofmeyer, H.; Kerstens, J.G.M.; Snijder, H.H.; Bakker, M.C.M.

1996-01-01

Design rules describing failure at an interior support of cold-formed steel flexural members are of an empirical nature. This is probably due to the complex character of the failure mechanisms, which makes an analytical approach difficult. An overview of research on this subject has been made. The

Large Civil Tiltrotor (LCTR2) Interior Noise Predictions due to Turbulent Boundary Layer Excitation

Science.gov (United States)

Grosveld, Ferdinand W.

2013-01-01

The Large Civil Tiltrotor (LCTR2) is a conceptual vehicle that has a design goal to transport 90 passengers over a distance of 1800 km at a speed of 556 km/hr. In this study noise predictions were made in the notional LCTR2 cabin due to Cockburn/Robertson and Efimtsov turbulent boundary layer (TBL) excitation models. A narrowband hybrid Finite Element (FE) analysis was performed for the low frequencies (6-141 Hz) and a Statistical Energy Analysis (SEA) was conducted for the high frequency one-third octave bands (125- 8000 Hz). It is shown that the interior sound pressure level distribution in the low frequencies is governed by interactions between individual structural and acoustic modes. The spatially averaged predicted interior sound pressure levels for the low frequency hybrid FE and the high frequency SEA analyses, due to the Efimtsov turbulent boundary layer excitation, were within 1 dB in the common 125 Hz one-third octave band. The averaged interior noise levels for the LCTR2 cabin were predicted lower than the levels in a comparable Bombardier Q400 aircraft cabin during cruise flight due to the higher cruise altitude and lower Mach number of the LCTR2. LCTR2 cabin noise due to TBL excitation during cruise flight was found not unacceptable for crew or passengers when predictions were compared to an acoustic survey on a Q400 aircraft.

An interdisciplinary approach to design at the University of Pretoria ...

African Journals Online (AJOL)

This article investigates the implementation of an interdisciplinary approach to Design in Architecture, Landscape Architecture and Interior Architecture at the University of Pretoria, South Africa. Architecture, Landscape Architecture and Interior Architecture were previously offered as distinctive academic disciplines, located ...

Electrical conductivity of the lunar interior - Theory, error sources, and estimates

Science.gov (United States)

Goldstein, B. E.

1979-01-01

Estimates of the electrical conductivity of the lunar interior were previously obtained by comparison of magnetometer data at the lunar surface and in near lunar space. In studies based on solar wind observations, IR was assumed that fields induced in the lunar interior by time-varying external fields are confined by the solar wind within the lunar interior on the dayside and within a cylindrical plasma cavity on the nightside. In the present paper, the induced fields are calculated for a more realistic conical plasma cavity geometry.

Educating Instructional Designers: Different Methods for Different Outcomes.

Science.gov (United States)

Rowland, Gordon; And Others

1994-01-01

Suggests new methods of teaching instructional design based on literature reviews of other design fields including engineering, architecture, interior design, media design, and medicine. Methods discussed include public presentations, visiting experts, competitions, artifacts, case studies, design studios, and internships and apprenticeships.…

Calidad ambiental interior: bienestar, confort y salud

Directory of Open Access Journals (Sweden)

Francisco Vargas Marcos

2005-01-01

Full Text Available Distintas formas de interpretar las condiciones ambientales han llevado al desarrollo de conceptos tales como edificio enfermo, calidad del aire o calidad ambiental interior, todos ellos encaminados a entender la complejidad de los contaminantes en los ambientes cerrados y las implicaciones sobre la salud de la población. La propuesta de "Calidad ambiental interior" es un avance conceptual y operativo que supera ampliamente a los anteriores, puesto que orienta las acciones hacia ambientes saludables sin limitar al aire la idea de contaminación. El objetivo del trabajo es identificar las competencias y el marco legislativo que permiten actuar en la prevención de riesgos asociados a la exposición de contaminantes en ambientes interiores. Óptimas condiciones en los ambientes interiores deben redundar en salud, bienestar y confort, tanto en lo que respecta a la vida laboral como a los ámbitos donde se desarrollan las actividades cotidianas extralaborales, escolares, de descanso y de ocio. La sociedad actual exige lugares seguros, limpios y bien climatizados, para lo que es necesario integrar percepciones y exigencias de los habitantes y alcanzar un óptimo equilibrio entre estándares sociales, uso de la energía y desarrollo sostenible, buscando confort sin contaminar y sin aumentar el consumo de fuentes energéticas que degraden el medio ambiente. El desarrollo legislativo se orienta a la seguridad y la salud en los lugares de trabajo y la regulación de las sustancias químicas. La Sanidad Ambiental lleva a cabo tareas de prevención y control, participa en la ejecución de convenios internacionales de reducción de contaminantes y desechos y promueve acciones para el desarrollo de la Estrategia Europea de Salud y Medio Ambiente.

Special aspects for forming the interiors of thai shopping malls through the use of the biological approach

Science.gov (United States)

Kuznetsova, Iryna O.; Rosliakova, Ljubov V.; Zakharchuk, Viktorija L.; Samosudova, Natalia

2017-10-01

This study reviews the biological approach to Thai shopping mall’s interior design planning. The authors defined the principles of the mall’s design optimization in Thailand on the basis of the imitation of biological samples at constructive, art-compositional, organizational and ecological levels. The analysis of forming the shopping malls interiors and space-planning solutions is based on the imitation of eight basic levels of organization of living things: molecules, cells, tissues, organs, organisms, populations, ecosystem and biosphere. The examples of the direct and implicit application of biological analogues were demonstrated in the architecture and design of Thai shopping malls. In the study, the shopping mall is regarded as an open self-sufficient system with a high level of autonomy and a fortified structural organization that includes various functional components. On the basis of the analysis of existing Thai shopping malls, a list of the basic requirements for the design of the malls was compiled. This corresponds to the needs and desires of the modern customer and ensures the competitiveness of the establishment. The phenomenon of multisensory design approach that enhances the psychophysical comfort of the shopping mall visitors is described. Socio-cultural and geographical factors were identified which determine the development of biodesign in Thailand. The article reveals the potential for a combination of biology and design to enhance the aesthetics, ergonomics and efficiency of the shopping malls. The prospects within the development of this field and the possibility of applying the solutions in practice were explored.

Borehole locations on seven interior salt domes

International Nuclear Information System (INIS)

Simcox, A.C.; Wampler, S.L.

1982-08-01

This report is designed as an inventory of all wells known to have been drilled within a five-mile radius of each of seven salt domes within the Interior Salt Basin in east Texas, northern Louisiana and Mississippi. There are 72 boreholes that entered salt above an elevation of -3000 feet mean sea level. For these, details of location, drilling dates, depth of casing and cement, elevation of top of caprock and salt, etc., are given on tables in the appendix. Of the seven domes, Oakwood has the largest number of boreholes, thirty-eight (including two sidetracked wells) that enter the salt stock above -3000 feet mean sea level; another dome in northeast Texas, Keechi, has eight; in northern Louisiana, Rayburn's has four and Vacherie has five; in southern Mississippi, Cypress Creek has seven, Lampton has one, and Richton has nine. In addition, all wells known outside the supra-domal area, but within a five-mile radius of the center of the 7 domes are separately catalogued

Measure Guideline. Deep Energy Enclosure Retrofit for Interior Insulation of Masonry Walls

Energy Technology Data Exchange (ETDEWEB)

Musunuru, S. [Building Science Corporation, Westford, MA (United States); Pettit, B. [Building Science Corporation, Westford, MA (United States)

2015-04-30

This Measure Guideline describes a deep energy enclosure retrofit solution for insulating mass masonry buildings from the interior. It describes the retrofit assembly, technical details, and installation sequence for retrofitting masonry walls. Interior insulation of masonry retrofits might adversely affect the durability of the wall. This guideline includes a review of decision criteria pertinent to retrofitting masonry walls from the interior and the possible risk of freeze-thaw damage.

Resilience of Athabascan subsistence systems to interior Alaska's changing climate

Science.gov (United States)

Gary P. Kofinas; F. Stuart Chapin; Shauna BurnSilver; Jennifer I. Schmidt; Nancy L. Fresco; Knut Kielland; Stephanie Martin; Anna Springsteen; T. Scott Rupp

2010-01-01

Subsistence harvesting and wild food production by Athabascan peoples is part of an integrated social-ecological system of interior Alaska. We describe effects of recent trends and future climate change projections on the boreal ecosystem of interior Alaska and relate changes in ecosystem services to Athabascan subsistence. We focus primarily on moose, a keystone...

Development of an anti-flood board to protect the interiors and exteriors of the infrastructure

Science.gov (United States)

Petru, Michal; Srb, Pavel; Sevcik, Ladislav; Martinec, Tomas; Kulhavy, Petr

2018-06-01

This article deals with the development of an anti-flood board to protect the interior and exterior of various infrastructures, such a houses, cottages or industrial buildings. It was designed prototypes and assembled numerical simulations. In Central Europe and in particular in the Czech Republic, floods are an integral part of the natural water cycle and cause great loss of life and great property damage. The development of new types of mobile anti-flood boards is very important as the design solution is developed for flood protection with regard to minimizing weight, cost of production, easy manipulation, simplicity and speed of installation.

Active control of turbulent boundary layer sound transmission into a vehicle interior

International Nuclear Information System (INIS)

Caiazzo, A; Alujević, N; Pluymers, B; Desmet, W

2016-01-01

In high speed automotive, aerospace, and railway transportation, the turbulent boundary layer (TBL) is one of the most important sources of interior noise. The stochastic pressure distribution associated with the turbulence is able to excite significantly structural vibration of vehicle exterior panels. They radiate sound into the vehicle through the interior panels. Therefore, the air flow noise becomes very influential when it comes to the noise vibration and harshness assessment of a vehicle, in particular at low frequencies. Normally, passive solutions, such as sound absorbing materials, are used for reducing the TBL-induced noise transmission into a vehicle interior, which generally improve the structure sound isolation performance. These can achieve excellent isolation performance at higher frequencies, but are unable to deal with the low-frequency interior noise components. In this paper, active control of TBL noise transmission through an acoustically coupled double panel system into a rectangular cavity is examined theoretically. The Corcos model of the TBL pressure distribution is used to model the disturbance. The disturbance is rejected by an active vibration isolation unit reacting between the exterior and the interior panels. Significant reductions of the low-frequency vibrations of the interior panel and the sound pressure in the cavity are observed. (paper)

UNIFIED CONTROL STRUCTURE OF MULTI-TYPE INTERIOR PERMANENT MAGNET MOTOR

Directory of Open Access Journals (Sweden)

M. NORHISAM

2015-03-01

Full Text Available This paper presents the control strategy structure to extract the speed torque characteristic for the newly designed three phase Multi Type Interior Permanent Magnet Motor. The proposed structure with the driving circuits exhibit the performance of torque characteristics of the stepper motor and brushless motor with independent coil winding per phase especially used as an in-wheel motor in agricultural applications. Brushless Direct Current motors exhibit characteristics of generating high torque at high speed while the Permanent Magnet Stepper motors has characteristic of generating high torque at low speed. The typical characteristics of the above two are integrated in the proposed structure with a complex control structure that handle the switching complexity and speed control in real time. Thus, a specially designed driving system is essential to drive and control this special motor. The evaluation of the motor mechanical characteristics when applying load torque is also presented. The result determines the practical torque range applicable for each motor configuration and as combined machine.

Measure Guideline: Deep Energy Enclosure Retrofit for Interior Insulation of Masonry Walls

Energy Technology Data Exchange (ETDEWEB)

Musunuru, S. [Building Science Corporation, Westford, MA (United States); Pettit, B. [Building Science Corporation, Westford, MA (United States)

2015-04-01

This Measure Guideline describes a deep energy enclosure retrofit (DEER) solution for insulating mass masonry buildings from the interior. It describes the retrofit assembly, technical details, and installation sequence for retrofitting masonry walls. Interior insulation of masonry retrofits has the potential to adversely affect the durability of the wall; this document includes a review of decision criteria pertinent to retrofitting masonry walls from the interior and the possible risk of freeze-thaw damage.

College students' perceptions of sexual orientation and gender given job descriptions and titles for interior decoration, interior design, and architecture.

Science.gov (United States)

Wood-Nartker, B Jeanneane; Sepanski, Jungsywan; McCrady, Joe; Gligor, Andreea

2007-06-01

To examine perceptions of design professionals, this study was designed to examine possible gender-bias based on job title and description and whether there is a relationship between the two perceptions. A respondent's sex was significantly related to perceptions of a design professional's sex. Both respondents' sex and the perceived sex of the design professional had significant effects on the perceived sexual orientation of the design professionals. Furthermore, the results also indicated that if the design professional was perceived to be male, there was a higher tendency that he would be perceived as homosexual, especially by a male respondent.

Effects of transit bus interior configuration on performance of wheeled mobility users during simulated boarding and disembarking.

Science.gov (United States)

D'Souza, Clive; Paquet, Victor; Lenker, James A; Steinfeld, Edward

2017-07-01

The emergence of low-floor bus designs and related regulatory standards in the U.S. have resulted in substantial improvements in public transit accessibility. However, passengers using wheeled mobility devices still experience safety concerns and inefficiencies in boarding, disembarking, and interior circulation on low-floor buses. This study investigates effects of low-floor bus interior configuration and passenger crowding on boarding and disembarking efficiency and safety. Users of manual wheelchairs (n = 18), powered wheelchairs (n = 21) and electric scooters (n = 9) simulated boarding and disembarking in three interior layout configurations at low and high passenger crowding conditions on a full-scale laboratory mock-up of a low-floor bus. Dependent measures comprised task times and critical incidents during access ramp use, fare payment, and movement to and from the doorway and wheeled mobility securement area. Individual times for unassisted boarding ranged from 15.2 to 245.3 s and for disembarking ranged from 9.1 to 164.6 s across layout and passenger crowding conditions. Nonparametric analysis of variance showed significant differences and interactions across vehicle design conditions, passenger load and mobility device type on user performance. The configuration having electronic on-board fare payment, rear-bus entrance doorways and adjacent device securement areas demonstrated greatest efficiency and safety. High passenger load adversely impacted efficiency and frequency of critical incidents during on-board circulation across all three layouts. Findings have broader implications for improving transit system efficiency and quality of service across the spectrum of transit users. Copyright © 2017 Elsevier Ltd. All rights reserved.

Electromagnetic sounding of the Earth's interior

CERN Document Server

Spichak, Viacheslav V

2015-01-01

Electromagnetic Sounding of the Earth's Interior 2nd edition provides a comprehensive up-to-date collection of contributions, covering methodological, computational and practical aspects of Electromagnetic sounding of the Earth by different techniques at global, regional and local scales. Moreover, it contains new developments such as the concept of self-consistent tasks of geophysics and , 3-D interpretation of the TEM sounding which, so far, have not all been covered by one book. Electromagnetic Sounding of the Earth's Interior 2nd edition consists of three parts: I- EM sounding methods, II- Forward modelling and inversion techniques, and III - Data processing, analysis, modelling and interpretation. The new edition includes brand new chapters on Pulse and frequency electromagnetic sounding for hydrocarbon offshore exploration. Additionally all other chapters have been extensively updated to include new developments. Presents recently developed methodological findings of the earth's study, including seism...

Coarse-scale restoration planning and design in Interior Columbia River Basin ecosystems: An example for restoring declining whitebark pine forests

Science.gov (United States)

Robert E. Keane; James P. Menakis; Wendel J. Hann

1996-01-01

During the last 2 years, many people from numerous government agencies and private institutions compiled a scientific assessment of the natural and human resources of the Interior Columbia River Basin (Jensen and Bourgeron 1993). This assessment is meant to guide the development of a coarse-scale Environmental Impact Statement for all 82 million hectares comprising the...

24 CFR 3280.107 - Interior privacy.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Interior privacy. 3280.107 Section 3280.107 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued... privacy. Bathroom and toilet compartment doors shall be equipped with a privacy lock. ...

Piecewise-Constant-Model-Based Interior Tomography Applied to Dentin Tubules

Directory of Open Access Journals (Sweden)

Peng He

2013-01-01

Full Text Available Dentin is a hierarchically structured biomineralized composite material, and dentin’s tubules are difficult to study in situ. Nano-CT provides the requisite resolution, but the field of view typically contains only a few tubules. Using a plate-like specimen allows reconstruction of a volume containing specific tubules from a number of truncated projections typically collected over an angular range of about 140°, which is practically accessible. Classical computed tomography (CT theory cannot exactly reconstruct an object only from truncated projections, needless to say a limited angular range. Recently, interior tomography was developed to reconstruct a region-of-interest (ROI from truncated data in a theoretically exact fashion via the total variation (TV minimization under the condition that the ROI is piecewise constant. In this paper, we employ a TV minimization interior tomography algorithm to reconstruct interior microstructures in dentin from truncated projections over a limited angular range. Compared to the filtered backprojection (FBP reconstruction, our reconstruction method reduces noise and suppresses artifacts. Volume rendering confirms the merits of our method in terms of preserving the interior microstructure of the dentin specimen.

The interior transmission spectrum in one dimension

International Nuclear Information System (INIS)

Hickmann, Kyle S

2012-01-01

This paper seeks conditions on acoustic profiles c(x) and b(x) which imply the existence of intervals free of transmission eigenvalues. The existence of intervals free of transmission eigenvalues has important implications in the question of unique recovery of the acoustic profile for inverse acoustic scattering theory using the linear sampling method and for the inverse source problem in thermoacoustic tomography. We examine the interior transmission spectrum relative to two acoustic profiles on the unit interval. This research includes the case when the difference of the two acoustic profiles changes sign and is, to the author's knowledge, the only work to date on the interior transmission spectrum allowing this behavior. It is shown that for a large class of acoustic profiles the transmission spectrum is asymptotically sparse. The spectrum exhibits three distinct types of behavior dependent on the relation of the two acoustic profiles. Numerical examples of each type of behavior are given which show how the transmission eigenvalues are distributed depending on the relation between c(x) and b(x). Our method of study is to reduce the interior transmission problem on [0, 1] to a problem of finding roots of a determinant of fundamental solutions to a Sturm–Liouville problem. The asymptotic expansion of solutions of the Sturm–Liouville problem then allows us to analyze properties of the transmission spectrum for large values of the wavenumber. (paper)

Signage and wayfinding design a complete guide to creating environmental graphic design systems

CERN Document Server

Calori, Chris

2015-01-01

A new edition of the market-leading guide to signage and wayfinding design This new edition of Signage and Wayfinding Design: A Complete Guide to Creating Environmental Graphic Design Systems has been fully updated to offer you the latest, most comprehensive coverage of the environmental design process-from research and design development to project execution. Utilizing a cross-disciplinary approach that makes the information relevant to architects, interior designers, landscape architects, graphic designers, and industrial engineers alike, the book arms you with the skills needed to apply a

Model Based Control of Moisture Sorption in a Historical Interior

Directory of Open Access Journals (Sweden)

P. Zítek

2005-01-01

Full Text Available This paper deals with a novel scheme for microclimate control in historical exhibition rooms, inhibiting moisture sorption phenomena that are inadmissible from the preventive conservation point of view. The impact of air humidity is the most significant harmful exposure for a great deal of the cultural heritage deposited in remote historical buildings. Leaving the interior temperature to run almost its spontaneous yearly cycle, the proposed non-linear model-based control protects exhibits from harmful variations in moisture content by compensating the temperature drifts with an adequate adjustment of the air humidity. Already implemented in a medieval interior since 1999, the proposed microclimate control has proved capable of permanently maintaining constant a desirable moisture content in organic or porous materials in the interior of a building. 

The challenge to explore the Brazilian interior basins; O desafio da exploracao das bacias interiores brasileiras

Energy Technology Data Exchange (ETDEWEB)

Bacoccoli, Giuseppe [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia; Guimaraes, Paulo Buarque [Organizacao da Industria do Petroleo (ONIP), Rio de Janeiro, RJ (Brazil)

2004-07-01

Due to the development of the fields, already discovered in the deep waters of the Southeastern Atlantic Margin, the Brazilian domestic production will shortly be equivalent to the consumption. Despite reaching this goal, the exploration of large interior basins is still considered a challenge. Surprisingly, after the discoveries in the Solimoes Basin, as well after the opening of the Brazilian Petroleum Sector in 1997, the present level of the exploration activities in these basins is far below the previous historical averages. The available data are still now considered too scarce, to perform a proper evaluation. Apparently, a vicious circle has been established: due to the a priori low attractiveness new data are not acquired and because the lack of new data the attractiveness cannot be modified nor improved. The Parnaiba Basin is usually mentioned as an example of this poor amount of data. A modest coverage of ancient 2D seismic lines, and obsolete aero magnetic survey and thirty one exploratory wells, mostly located without geophysical support, represents all the available data in this vast basin with an area over 600,000 sq km. Recent regional geologic interpretations in such interior basins, as in Solimoes, Parana and also Parnaiba, are pointing out the presence of remarkable intraplate tectonic events, successively reactivated along the geologic time. It is now intended that these events can play an important role in the control of the petroleum system and in focalizing the new exploration activities. However, efforts should be applied in the revision of some regulatory rules, in Brazil, in order to better stimulate the onshore exploration and particularly the exploration of the interior basins. As recommended by the new Brazilian Petroleum Law, part of the government takes shall be effectively applied to acquire more geologic and geophysical data in the onshore areas (author)

Recent advances in modeling stellar interiors (u)

Energy Technology Data Exchange (ETDEWEB)

Guzik, Joyce Ann [Los Alamos National Laboratory

2010-01-01

Advances in stellar interior modeling are being driven by new data from large-scale surveys and high-precision photometric and spectroscopic observations. Here we focus on single stars in normal evolutionary phases; we will not discuss the many advances in modeling star formation, interacting binaries, supernovae, or neutron stars. We review briefly: (1) updates to input physics of stellar models; (2) progress in two and three-dimensional evolution and hydrodynamic models; (3) insights from oscillation data used to infer stellar interior structure and validate model predictions (asteroseismology). We close by highlighting a few outstanding problems, e.g., the driving mechanisms for hybrid {gamma} Dor/{delta} Sct star pulsations, the cause of giant eruptions seen in luminous blue variables such as {eta} Car and P Cyg, and the solar abundance problem.

Integration of educational methods and physical settings: Design ...

African Journals Online (AJOL)

... setting without having an architectural background. The theoretical framework of the research allows designers to consider key features and users' possible activities in High/ Scope settings and shape their designs accordingly. Keywords: daily activity; design; High/Scope education; interior space; teaching method ...

Contradictions within a Knotworking session of an interior décor project

DEFF Research Database (Denmark)

Rasmussen, Mai; Jensen, Rasmus Lund; Svidt, Kjeld

actors with an interest in the specific ‘knot’ (Engeström 2008). Moreover this presentation presents an analysis of contradictions within a Knotworking session of an interior décor project. The interior décor project is targeted a new building for Department of Civil Engineering at Aalborg University...... in Denmark aiming to generate an ownership among the users of the building. Through this presentation the audience will discover advantages and disadvantages of the utilization of Knotowkring as a method for making interior décor at a Danish University. Moreover, the audience will notify Knotworking...... been utilized in contexts as the library, hospital and construction industry. By investigating Knotworking in the context of interior décor through an analysis by activity theory systems, this research contributes to knowledge about contradictions within a Knotworking session and potential solutions...

Improving Student Commitment to Healthcare-Related Design Practice by Improving the Studio Learning Experience.

Science.gov (United States)

Tan, Lindsay; Hong, Miyoung; Albert, Taneshia West

2017-10-01

This case study explores the influence of the healthcare design studio experience on students' short-term professional goals as measured through rates of healthcare-related certification and internship/employment. The value and relevance of interior design is evident in the healthcare design sector. However, interior design students may not perceive this value if it is not communicated through their design education. Students' experience in the design studio plays a crucial role in determining career choices, and students may be more committed to career goals when there is clear connection between major coursework and professional practice. The authors compared healthcare-related certification and internship/employment levels between two student cohorts in a capstone undergraduate interior design healthcare design studio course. The first cohort was led by the existing curriculum. The second cohort was led by the revised curriculum that specifically aimed at encouraging students to commit to healthcare-related design practice. When measured at 3 months from graduation, the second cohort, led by the revised curriculum, saw a 30% increase in Evidence-based Design Accreditation and Certification exam pass rates and a 40% increase in healthcare-related internship/employment. The challenge of interior design education is to instill in emerging professionals not only professional competence but also those professional attitudes that will make them better prepared to design spaces that improve quality of life, particularly in healthcare environments. The results exceeded the project goals, and so this could be considered a promising practice for courses focused on healthcare design education.

The Interiors of Jupiter and Saturn

Science.gov (United States)

Helled, Ravit

2018-05-01

Probing the interiors of the giant planets in our Solar System is not an easy task. This requires a set of observations combined with theoretical models that are used to infer the planetary composition and its depth dependence. The masses of Jupiter and Saturn are 318 and 96 Earth masses, respectively, and since a few decades, we know that they mostly consist of hydrogen and helium. It is the mass of heavy elements (all elements heavier than helium) that is not well determined, as well as its distribution within the planets. While the heavy elements are not the dominating materials in Jupiter and Saturn, they are the key for our understanding of their formation and evolution histories. The planetary internal structure is inferred to fit the available observational constraints including the planetary masses, radii, 1-bar temperatures, rotation rates, and gravitational fields. Then, using theoretical equations of states (EOSs) for hydrogen, helium, their mixtures, and heavier elements (typically rocks and/or ices), a structure model is developed. However, there is no unique solution for the planetary structure, and the results depend on the used EOSs and the model assumptions imposed by the modeler. Standard interior models of Jupiter and Saturn include three main regions: (1) the central region (core) that consists of heavy elements, (2) an inner metallic hydrogen envelope that is helium rich, and (3) an outer molecular hydrogen envelope depleted with helium. The distribution of heavy elements can be either homogenous or discontinuous between the two envelopes. Major model assumptions that can affect the derived internal structure include the number of layers, the heat transport mechanism within the planet (and its entropy), the nature of the core (compact vs. diluted), and the location/pressure where the envelopes are divided. Alternative structure models assume a less distinct division between the layers and/or a less non-homogenous distribution of the heavy

Dwelling Designers

Science.gov (United States)

Szekely, George

2012-01-01

Children's inventions go far beyond track housing or Ethan Allen furniture; they foreshadow the most innovative ideas in building forms and interior designs. Children improvise with containers and find places in a home that suggest enticing dwellings. A drawer left open becomes a balcony, soap trays become cots, and the space between twin beds…

Juno's first peek at Jupiter's interior

Science.gov (United States)

Guillot, Tristan; Miguel, Yamila; Hubbard, William B.; Kaspi, Yohai; Reese, Daniel; Helled, Ravit; Galanti, Eli; Militzer, Burkhard; Wahl, Sean; Folkner, William M.; Anderson, John; Iess, Luciano; Durante, Daniele; Parisi, Marzia; Stevenson, David J.

2017-04-01

The first orbits of Juno around Jupiter have led to a considerable improvement in the measurement of the planet's even gravitational moments. We will discuss how this leads to better constraints on jovian interior models, and how internal differential rotation and equations of state play an important part in the analysis.

Condition Assessment Survey (CAS) Program. Deficiency standards and inspections methods manual: Volume 6, 0.06 Interior construction

Energy Technology Data Exchange (ETDEWEB)

1993-05-01

General information is presented for asset determinant factor/CAS repair codes/CAS cost factors; guide sheet tool & material listing; testing methods; inspection frequency; standard system design life tables; system work breakdown structure; and general system/material data. Deficiency standards and inspection methods are presented for conventional and specialty partitions, toilet partitions & accessories, interior doors, paint finishes/coatings/ wall covering systems; floor finishing systems; and ceiling systems.

MnO2@colloid carbon spheres nanocomposites with tunable interior architecture for supercapacitors

International Nuclear Information System (INIS)

Zhang, Yuxin; Dong, Meng; Zhu, Shijin; Liu, Chuanpu; Wen, Zhongquan

2014-01-01

Graphical abstract: - Highlights: • MnO 2 @CSs nanocomposites have been successfully synthesized in room temperature. • The composites exhibited three structures: core–shell, yolk–shell and hollow structure. • The yolk–shell structure exhibited a high specific capacitance and cycling stability. - Abstract: MnO 2 @colloid carbon spheres nanocomposites with tunable interior architecture have been synthesized by a facile and cost-effective strategy at room temperature. The structure and morphology of as-prepared nanocomposites were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), nitrogen adsorption, focused ion beam scanning electron microscopy (FIB/SEM) and high-resolution transmission electron microscopy (HRTEM). The as-obtained composites exhibited a three-dimensional architecture with core–shell, yolk–shell and hollow interior structure. Furthermore, the electrochemical properties of composites were evaluated by cycle voltammetric (CV) and galvanostatic charge–discharge measurements. The yolk–shell structure exhibited the optimized pseudocapacitance performance, revealing a specific capacitance (273 F g −1 ) with a good rate and cycling stability, owing to its unique structure and the poor crystallinity of MnO 2 nanofilms. Therefore, this facile synthetic strategy could be useful to design and synthesis of tunable nanostructures with enhanced supercapacitor behavior

The potential use of domestic safeguards interior monitors in International Safeguards

International Nuclear Information System (INIS)

Williams, J.D.; Dupree, S.A.; Sonnier, C.S.

1998-01-01

An important future element of International Safeguards instrumentation is expected to be the merging of containment/surveillance and nondestructive assay equipment with domestic physical protection equipment into integrated systems, coupled with remote monitoring. Instrumentation would include interior monitoring and assessment and entry/exit monitoring. Of particular importance is the application of interior monitors in spaces of declared inactivity; for example, in nuclear material storage locations that are entered infrequently. The use of modern interior monitors in International Safeguards offers potential for improving effectiveness and efficiency. Within the context of increased cooperation, one can readily envision increased interaction between International Safeguards and Domestic Safeguards, including increased joint use of State System of Accounting and Control data

Expert Meeting Report. Interior Insulation Retrofit of Mass Masonry Wall Assemblies

Energy Technology Data Exchange (ETDEWEB)

Ueno, K. [Building Science Corporation, Somerville, MA (United States); Van Straaten, R. [Building Science Corporation, Somerville, MA (United States)

2012-02-01

The Building Science Consortium held an Expert Meeting on Interior Insulation Retrofit of Mass Masonry Wall Assemblies on July 30, 2011, at the Westford Regency Hotel in Westford, MA. This report outlines the extensive information that was presented on assessment of risk factors for premature building deterioration due to interior insulation retrofits, and methods to reduce such risks.

Expert Meeting Report: Interior Insulation Retrofit of Mass Masonry Wall Assemblies

Energy Technology Data Exchange (ETDEWEB)

Ueno, K.; Van Straaten, R.

2012-02-01

The Building Science Consortium held an Expert Meeting on Interior Insulation Retrofit of Mass Masonry Wall Assemblies on July 30, 2011 at the Westford Regency Hotel in Westford, MA. This report outlines the extensive information that was presented on assessment of risk factors for premature building deterioration due to interior insulation retrofits, and methods to reduce such risks.

GENETIC ALGORITHM IN OPTIMIZATION DESIGN OF INTERIOR PERMANENT MAGNET SYNCHRONOUS MOTOR

Directory of Open Access Journals (Sweden)

Phuong Le Ngo

2017-01-01

Full Text Available Classical method of designing electric motors help to achieve functional motor, but doesn’t ensure minimal cost in manufacturing and operating. Recently optimization is becoming an important part in modern electric motor design process. The objective of the optimization process is usually to minimize cost, energy loss, mass, or maximize torque and efficiency. Most of the requirements for electrical machine design are in contradiction to each other (reduction in volume or mass, improvement in efficiency etc.. Optimization in design permanent magnet synchronous motor (PMSM is a multi-objective optimization problem. There are two approaches for solving this problem, one of them is evolution algorithms, which gain a lot of attentions recently. For designing PMSM, evolution algorithms are more attractive approach. Genetic algorithm is one of the most common. This paper presents components and procedures of genetic algorithms, and its implementation on computer. In optimization process, analytical and finite element method are used together for better performance and precision. Result from optimization process is a set of solutions, from which engineer will choose one. This method was used to design a permanent magnet synchronous motor based on an asynchronous motor type АИР112МВ8.

Computer Applications in the Design Process.

Science.gov (United States)

Winchip, Susan

Computer Assisted Design (CAD) and Computer Assisted Manufacturing (CAM) are emerging technologies now being used in home economics and interior design applications. A microcomputer in a computer network system is capable of executing computer graphic functions such as three-dimensional modeling, as well as utilizing office automation packages to…

Evaluation of internal/external exposure from interior building materials

International Nuclear Information System (INIS)

Furuta, Etsuko; Morita-Murase, Yuko; Yoshizawa, Yukio

2008-01-01

Internal exposure to alpha particles emitted from 222 Rn (radon) and its daughters is the second leading cause of lung cancer. As a source of indoor radon in home, there are interior building materials that contain radioactive minerals. These radioactive consumer products have been claimed by distributors to have effect of 'minus-ion' or 'radon spring' for healthy promotion. We analyzed radioactive nuclides contained in the interior building materials, and measured radon levels released from them. The results of gamma-ray spectrometry revealed that these interior building materials contain U- and Th-series nuclides. The densities of some radioactive nuclides in the tile used for a bathroom exceeded the exempt limits of International Basic Safety Standards. However, the radon densities released from the tile was lower than detectable limit. In contrast, one of the wallpaper released 34 Bq·m -3 of radon gas in a 50-liter container. This value is two times higher than the average radon level in Japanese homes. The minus-ion effect' wallpapers are thought to be a cause of residential exposure to radon. (author)

THE TYPES OF PLANS AND INTERIOR DESIGN AT MEMORIAL CLOISTERS OF DAITOKU-JI AND MYOSHIN-JI TEMPLES IN KYOTO IN THE EDO PERIOD [1596~1868] -The Development and Changes of the Sanctuary-

Directory of Open Access Journals (Sweden)

Antariksa Antariksa

2003-01-01

Full Text Available In the early Edo period the number of memorial cloisters (tacchu increased, especially, at Daitoku-ji and Myôshin-ji temples. As a consequence, the hondô (kyakuden, hojo were further developed in all aspects of architectural style, interior design and plan. This study will attempt to clarify the types of plans at memorial cloisters of both temples, by analyzing the arrangement and composition of the sanctuary, during the Edo period. In that period, the requirement of the rooms was interlaced with the function, and even dependent upon everyday life and the activities of religious services.

Impacts of inhomogeneous landscapes in oasis interior on the oasis self-maintenance mechanism by integrating numerical model with satellite data

Directory of Open Access Journals (Sweden)

X. Meng

2012-10-01

Full Text Available The impacts of inhomogeneity of the oasis interior on the oasis self-maintenance mechanism are investigated by using the mesoscale model MM5 (the fifth-generation Pennsylvania State University National Center for Atmospheric Research (NCAR mesoscale model with satellite observations of land use types, vegetation fraction and surface-layer soil moisture from MODIS (Moderate Resolution Imaging Spectroradiometer data. Four simulations were performed, among which the CTL (control simulation and MOD (moderated simulation with parameters replaced by MODIS data were used to validate the model results; EXP1 (experiment 1 and EXP2 (experiment 2 were designed to study the inhomogeneity of oasis interior. Results show that the changes of oasis heterogeneity influence the surface heat-flux partitioning, which leads to a larger "cold-wet" effect over the oasis. Vertical sections of humidity illustrate the existence of a moisture-inversion level, and the deeper moisture inversion of EXP1 and EXP2 further indicates that the relative homogeneity in the oasis interior helps produce stronger humidity inversion over the oasis, thus limiting evaporation. This is further verified by the analysis of the secondary circulation, which shows that the more homogeneous land surface conditions lead to stronger secondary circulation and less turbulent drafts over the oasis interior, playing a positive role in the oasis self-maintenance and development.

Wall grid structure for interior scene synthesis

KAUST Repository

Xu, Wenzhuo; Wang, Bin; Yan, Dongming

2015-01-01

We present a system for automatically synthesizing a diverse set of semantically valid, and well-arranged 3D interior scenes for a given empty room shape. Unlike existing work on layout synthesis, that typically knows potentially needed 3D models

InSight: Single Station Broadband Seismology for Probing Mars' Interior

Science.gov (United States)

Panning, Mark P.; Banerdt, W. Bruce; Beucler, Eric; Boschi, Lapo; Johnson, Catherine; Lognonne, Philippe; Mocquet, Antoine; Weber, Renee C.

2012-01-01

InSight is a proposed Discovery mission which will deliver a lander containing geophysical instrumentation, including a heat flow probe and a seismometer package, to Mars. The aim of this mission is to perform, for the first time, an in-situ investigation of the interior of a truly Earth- like planet other than our own, with the goal of understanding the formation and evolution of terrestrial planets through investigation of the interior structure and processes of Mars.

Analysis of Subway Interior Noise at Peak Commuter Time.

Science.gov (United States)

Lee, Donguk; Kim, Gibbeum; Han, Woojae

2017-07-01

Although mass transit systems are convenient and efficient for urban people, little attention has been paid to the potential hearing hazard from their noise. The purpose of the current study was to measure and analyze levels of subway interior noise at peak commuter times and to provide information about commuters' daily dose of noise exposure. To measure the subway interior noise, nine subway lines inside Seoul (i.e., lines 1-9) and six lines surrounding the capital city area (i.e., Central, Bundang, Sinbundang, Incheon, Gyeongui, and Gyeongchun) were chosen. The noise was measured and recorded by a sound level meter for two-hour periods in the morning and evening. 1) In the LZeq analysis, the average noise level of all 15 lines was 72.78 dB; the maximum and minimum noise levels were 78.34 and 62.46 dB, respectively. The average noise level of the nine lines inside Seoul was 73.45 dB, which was 1.68-dB louder than that of the six lines surrounding the capital city area. 2) Based on the LZeq analysis of 33 measured frequencies, 12.5 Hz was the highest frequency and 20,000 Hz was the lowest. 3) There was no remarkable difference in the level of subway interior noise between morning and evening peak commuter times. We concluded that the level of subway interior noise was not loud enough for commuters to incur noise-induced hearing loss. Regardless, environmental noise control efforts in the subway system might be needed for commuters who take a subway every day.

The Architectonic Experience of Body and Space in Augmented Interiors.

Science.gov (United States)

Pasqualini, Isabella; Blefari, Maria Laura; Tadi, Tej; Serino, Andrea; Blanke, Olaf

2018-01-01

The environment shapes our experience of space in constant interaction with the body. Architectonic interiors amplify the perception of space through the bodily senses; an effect also known as embodiment. The interaction of the bodily senses with the space surrounding the body can be tested experimentally through the manipulation of multisensory stimulation and measured via a range of behaviors related to bodily self-consciousness. Many studies have used Virtual Reality to show that visuotactile conflicts mediated via a virtual body or avatar can disrupt the unified subjective experience of the body and self. In the full-body illusion paradigm, participants feel as if the avatar was their body (ownership, self-identification) and they shift their center of awareness toward the position of the avatar (self-location). However, the influence of non-bodily spatial cues around the body on embodiment remains unclear, and data about the impact of architectonic space on human perception and self-conscious states are sparse. We placed participants into a Virtual Reality arena, where large and narrow virtual interiors were displayed with and without an avatar. We then applied synchronous or asynchronous visuotactile strokes to the back of the participants and avatar, or, to the front wall of the void interiors. During conditions of illusory self-identification with the avatar, participants reported sensations of containment, drift, and touch with the architectonic environment. The absence of the avatar suppressed such feelings, yet, in the large space, we found an effect of continuity between the physical and the virtual interior depending on the full-body illusion. We discuss subjective feelings evoked by architecture and compare the full-body illusion in augmented interiors to architectonic embodiment. A relevant outcome of this study is the potential to dissociate the egocentric, first-person view from the physical point of view through augmented architectonic space.

The Architectonic Experience of Body and Space in Augmented Interiors

Directory of Open Access Journals (Sweden)

Isabella Pasqualini

2018-04-01

Full Text Available The environment shapes our experience of space in constant interaction with the body. Architectonic interiors amplify the perception of space through the bodily senses; an effect also known as embodiment. The interaction of the bodily senses with the space surrounding the body can be tested experimentally through the manipulation of multisensory stimulation and measured via a range of behaviors related to bodily self-consciousness. Many studies have used Virtual Reality to show that visuotactile conflicts mediated via a virtual body or avatar can disrupt the unified subjective experience of the body and self. In the full-body illusion paradigm, participants feel as if the avatar was their body (ownership, self-identification and they shift their center of awareness toward the position of the avatar (self-location. However, the influence of non-bodily spatial cues around the body on embodiment remains unclear, and data about the impact of architectonic space on human perception and self-conscious states are sparse. We placed participants into a Virtual Reality arena, where large and narrow virtual interiors were displayed with and without an avatar. We then applied synchronous or asynchronous visuotactile strokes to the back of the participants and avatar, or, to the front wall of the void interiors. During conditions of illusory self-identification with the avatar, participants reported sensations of containment, drift, and touch with the architectonic environment. The absence of the avatar suppressed such feelings, yet, in the large space, we found an effect of continuity between the physical and the virtual interior depending on the full-body illusion. We discuss subjective feelings evoked by architecture and compare the full-body illusion in augmented interiors to architectonic embodiment. A relevant outcome of this study is the potential to dissociate the egocentric, first-person view from the physical point of view through augmented

The Architectonic Experience of Body and Space in Augmented Interiors

Science.gov (United States)

Pasqualini, Isabella; Blefari, Maria Laura; Tadi, Tej; Serino, Andrea; Blanke, Olaf

2018-01-01

The environment shapes our experience of space in constant interaction with the body. Architectonic interiors amplify the perception of space through the bodily senses; an effect also known as embodiment. The interaction of the bodily senses with the space surrounding the body can be tested experimentally through the manipulation of multisensory stimulation and measured via a range of behaviors related to bodily self-consciousness. Many studies have used Virtual Reality to show that visuotactile conflicts mediated via a virtual body or avatar can disrupt the unified subjective experience of the body and self. In the full-body illusion paradigm, participants feel as if the avatar was their body (ownership, self-identification) and they shift their center of awareness toward the position of the avatar (self-location). However, the influence of non-bodily spatial cues around the body on embodiment remains unclear, and data about the impact of architectonic space on human perception and self-conscious states are sparse. We placed participants into a Virtual Reality arena, where large and narrow virtual interiors were displayed with and without an avatar. We then applied synchronous or asynchronous visuotactile strokes to the back of the participants and avatar, or, to the front wall of the void interiors. During conditions of illusory self-identification with the avatar, participants reported sensations of containment, drift, and touch with the architectonic environment. The absence of the avatar suppressed such feelings, yet, in the large space, we found an effect of continuity between the physical and the virtual interior depending on the full-body illusion. We discuss subjective feelings evoked by architecture and compare the full-body illusion in augmented interiors to architectonic embodiment. A relevant outcome of this study is the potential to dissociate the egocentric, first-person view from the physical point of view through augmented architectonic space. PMID

Perancangan Small Private Space Pada Interior Public Space Di Perpustakaan Universitas Kristen Petra Surabaya

OpenAIRE

Lucky Basuki, Holiman Chandra Yusita Kusumarini

2013-01-01

Lifestyle of modern people use some time to move out of residence (public space) makes the most of the private activities can not be fulfilled. It is an idea and the idea of creating a space that can meet the needs of the private in public spaces with small dimensions. Private space in the design of the library is housed in Petra Christian University Surabaya as space scope of small private space (minimal private space dimension). The creation of small private space in the interior of the lib...

Teaching Creative Thinking through Architectural Design

Science.gov (United States)

Jeon, Kijeong; Cotner, Teresa L.

2010-01-01

Art and art education are open to broader definitions in the twenty-first century. It is time that teachers seriously think about including built environment design in K-12 art education. The term "built environment" includes interior design, architecture, landscape architecture, and urban planning. Due to increased exposure to built environment…

Interior structure of rotating black holes. I. Concise derivation

International Nuclear Information System (INIS)

Hamilton, Andrew J. S.; Polhemus, Gavin

2011-01-01

This paper presents a concise derivation of a new set of solutions for the interior structure of accreting, rotating black holes. The solutions are conformally stationary, axisymmetric, and conformally separable. Hyper-relativistic counter-streaming between freely-falling collisionless ingoing and outgoing streams leads to mass inflation at the inner horizon, followed by collapse. The solutions fail at an exponentially tiny radius, where the rotational motion of the streams becomes comparable to their radial motion. The papers provide a fully nonlinear, dynamical solution for the interior structure of a rotating black hole from just above the inner horizon inward, down to a tiny scale.

Design and Experimental Study on Spinning Solid Rocket Motor

Science.gov (United States)

Xue, Heng; Jiang, Chunlan; Wang, Zaicheng

The study on spinning solid rocket motor (SRM) which used as power plant of twice throwing structure of aerial submunition was introduced. This kind of SRM which with the structure of tangential multi-nozzle consists of a combustion chamber, propellant charge, 4 tangential nozzles, ignition device, etc. Grain design, structure design and prediction of interior ballistic performance were described, and problem which need mainly considered in design were analyzed comprehensively. Finally, in order to research working performance of the SRM, measure pressure-time curve and its speed, static test and dynamic test were conducted respectively. And then calculated values and experimental data were compared and analyzed. The results indicate that the designed motor operates normally, and the stable performance of interior ballistic meet demands. And experimental results have the guidance meaning for the pre-research design of SRM.

Research on the Interior Sound Quality in Hybrid Electric Vehicle

Directory of Open Access Journals (Sweden)

Liao Lian Ying

2016-01-01

Full Text Available Even the overall level of vehicle interior noise of hybrid electric vehicle (HEV reduced to a certain degree, the vibration and noise generated by the engine, motor, generator and power split have made greater effect on the vehicle interior sound quality in HEV. In order to research the feature of vehicle interior sound quality in HEV, the HEV is used to be the research object, the binaural noise sample of the driver when playing different kinds of music in the vehicle with the speed of sixty kilometers per hour is collected. ArtemiS is used to conduct frequency division processing, so as to obtain the relative weight of each frequency band and the overall noise. The tone, roughness and sharpness of sound quality subjective evaluation parameters are quantified, the SPSS is used to establish the linear regression model of the sample, and the best masking music tracks are found out. Then, the sound samples that contains the best music tracks and the simple vehicle interior noise are re-collected, the regression model and ArtemiS are used to predict the subjective evaluation value. The research results show that when adding the music, the tone degree rises and the lowering degree decreases, thus the disturbing degree reduces, which significantly improves the sound quality in the HEV.

Elemen Pembentuk Makna pada Sebuah Interior Arsitektur

Directory of Open Access Journals (Sweden)

Dila Hendrassukma

2012-10-01

Full Text Available Along with the increasing needs of the community, also increasing the need for space to accommodated those needs. With limited space available nowadays, it is not uncommon to change the old buildings’ function as a place to meet the social growing need of the space. However, it is must be remembered by architects and interior architects when changing the functions of a space that the old space has its own histories and particular meaning to people who had ever occupied it. Those histories and meanings should be included in the creation of the new function. Article gives and describes elements that need to be known in order to understand the sense of a space, such as drawing plans, scale, proportion, movement, transition and access that embodied in the architecture and interior space. Qualitative methods by literature study is used in the making of this article.. 

Coupled evolution of the atmospheres and interiors of planets and satellites

International Nuclear Information System (INIS)

Schubert, G.; Turcotte, D.L.; Solomon, S.C.; Sleep, N.H.

1989-01-01

The evolution of a planetary atmosphere can be powerfully influenced by the planetary interior's function as both a source and a sink of atmospheric constituents; the interior can in turn be strongly influenced by the atmosphere because the mechanism of interior heat loss depends on a volatile content for which the atmosphere can serve both as sink and source. The dependence of mantle rheology on volatile content could furnish a feedback mechanism tending to keep regassing/degassing in balance, thereby maintaining a relatively constant atmospheric mass. Consideration of the abundances of radiogenic and nonradiogenic noble gases in the earth's atmosphere, and of the fluxes of these gases from the mantle, support a large degassing event early on, followed by a decrease in degassing efficiency with time and relatively inefficient outgassing over most of geologic time

New Trends in the Design, Cost, Construction of the Modern School Building.

Science.gov (United States)

Allied Masonry Council, McLean, VA.

The compact school, generally defined as a brick structure with a flexible interior and natural light admission of skylights, domes, clearstories and interior courtyards, emerged from the new educational programs. Evaluation of the compact school design includes--(1) appraisals and reactions to the physical environment, (2) explanations of the…

Komputasi Aliran Daya Optimal Sistem Tenaga Skala Besar dengan Metode Primal Dual Interior Point

Directory of Open Access Journals (Sweden)

Syafii Syafii

2016-03-01

Full Text Available This paper focuses on the use of Primal Dual Interior Point method in the analysis of optimal power flow. Optimal power flow analysis with Primal Dual Interior Point method then compared with Linear Programming Method using Matpower program. The simulation results show that the computation results of Primal Dual Interior Point similar with Linear Programming Method for total cost of generation and large power generated by each power plant. But in terms of computation time Primal Dual Interior Point method is faster than the method of Linear Programming, especially for large systems. Primal Dual Interior Point method have solved the problem in 40.59 seconds, while Linear Programming method takes longer 239.72 seconds for large-scale system 9241 bus. This is because the settlement PDIP algorithm starts from the starting point x0, which is located within the area of feasible move towards the optimal point, in contrast to the simplex method that moves along the border of the feasible from one extreme point to the other extreme point. Thus Primal Dual Interior Point method have more efficient in solving optimal power flow problem of large-scale power systems.

Pemanfaatan Limbah Plastik sebagai Alternatif Bahan Pelapis (Upholstery pada Produk Interior

Directory of Open Access Journals (Sweden)

Yunida Sofiana

2010-10-01

Full Text Available Environment pollution which is caused by garbage, especially plastic products, is one undeniable thing nowadays. Environment pollution by non-degradable materials could be decreased in 3Rs that are recycling, reusing, reducing. Recycle method is one of creative methods; the plastic waste could be recycled into matting materials that substitute natural material (pandanus and also to be alternative upholstery in interior products. Plastic waste treatment process until disposable is easier than natural material which has to go through several stages like drying and staining. What could be gained from pandanus could also be gained from plastic waste, so there are many things probable products could be designed. The product image is assumed to be modern, one trend nowadays.    

Interior drains for open pit disposal of uranium mill tailings

International Nuclear Information System (INIS)

Staub, W.P.

1978-01-01

A conceptualized interior drainage system is presented for reducing the environmental impact on natural groundwater by disposal of uranium mill tailings in the mined-out open pit. The evaporation/seepage ratio can be increased through the use of interior drains, long-term monitoring of groundwater quality can be eliminated, and the open pit will not require an extensive liner. Other advantages not related to groundwater are: control of fugitive dust and radon emanation during mill operations and timely reclamation after the impoundment is filled with tailings

Industrial Design in Aerospace/Role of Aesthetics

Science.gov (United States)

Bushnell, Dennis M.

2006-01-01

Industrial design creates and develops concepts and specifications that seek to simultaneously and synergistically optimize function, production, value and appearance. The inclusion of appearance, or esthetics, as a major design metric represents both an augmentation of conventional engineering design and an intersection with artistic endeavor(s). Report surveys past and current industrial design practices and examples across aerospace including aircraft and spacecraft, both exterior and interior.

Interior, Environment, and Related Agencies: FY2007 Appropriations

National Research Council Canada - National Science Library

Vincent, Carol H; Bearden, David M; Corn, M. L; Gorte, Ross W; Humphries, Marc; Sheikh, Pervaze A; Whiteman, David L; Boren, Susan; Walke, Roger; Bea, Keith

2007-01-01

... of Health and Human Services. It also includes funding for arts and cultural agencies; the Environmental Protection Agency, which was recently transferred to the appropriations subcommittees that deal with Interior and Related Agencies...

Early User Appraisal of the MDARS Interior Robot

National Research Council Canada - National Science Library

Laird, R

1999-01-01

The Mobile Detection Assessment Response System (MDARS) is a joint Army-Navy effort to field interior and exterior autonomous platforms for security and inventory assessment functions at DoD warehouses and storage sites...

Exoplanet's Figure and Its Interior

Science.gov (United States)

Mian, Zhang; Cheng-li, Huang

2018-01-01

Along with the development of the observing technology, the observation and study on the exoplanets' oblateness and apsidal precession have achieved significant progress. The oblateness of an exoplanet is determined by its interior density profile and rotation period. Between its Love number k2 and core size exists obviously a negative correlation. So oblateness and k2 can well constrain its interior structure. Starting from the Lane-Emden equation, the planet models based on different polytropic indices are built. Then the flattening factors are obtained by solving the Wavre's integro-differential equation. The result shows that the smaller the polytropic index, the faster the rotation, and the larger the oblateness. We have selected 469 exoplanets, which have simultaneously the observed or estimated values of radius, mass, and orbit period from the NASA (National Aeronautics and Space Administration) Exoplanet Archive, and calculated their flattening factors under the two assumptions: tidal locking and fixed rotation period of 10.55 hours. The result shows that the flattening factors are too small to be detected under the tidal locking assumption, and that 28% of exoplanets have the flattening factors larger than 0.1 under the fixed rotation period of 10.55 hours. The Love numbers under the different polytropic models are solved by the Zharkov's approach, and the relation between k2 and core size is discussed.

Speed of sound in the solar interior

International Nuclear Information System (INIS)

Christensen-Dalsgaard, J.; Rhodes, E.J. Jr.

1985-01-01

Frequencies of solar 5-min oscillations can be used to determine directly the sound speed of the solar interior. The determination described does not depend on a solar model, but relies only on a simple asymptotic description of the oscillations in terms of trapped acoustic waves. (author)

resonant inverter supplied interior permanent magnet (ipm)

African Journals Online (AJOL)

user

[5] Zhenyue Hong, “DC-voltage link resonant inverters”, Department of Electrical and. Electronic Engineering University of. Canterbury, New Zealand. [6] Kalyan Kumar Halder, Naruttam Kumar Roy and B.C. Ghosh, “Position Sensorless. Control for an Interior Permanent Magnet. Synchronous Motor SVM Drive with ANN.

RECYCLED TEXTILES USED IN AUTOMOTIVE INTERIORS. CASE STUDY- FORD MOTOR COMPANY

Directory of Open Access Journals (Sweden)

CUC Sunhilde

2017-05-01

Full Text Available The environmental movement is affecting all industries, but the textile and automotive industries are two of the few that are constantly being criticized. The automotive industry is the subject of much research, it is the largest manufacturing activity, there is a complex supply chain, is resource intensive and emits various hazardous gases and waste products. The article reviews the current state of automotive industry regarding the textile application. Automotive textiles have been classified as belonging to a category called “Mobiltech” which is one of the main streams of technical textiles. The term means all type of textile components e.g. fibers, filaments, yarns and the fabric used in automobiles. They are classed as technical textile because of the very high performance specifications and special properties required, different from those used in clothing and other applications. The performance of the automotive textiles depends on the fibre properties, fabric structures and various finishes used in the manufacturing processes. After a short presentation of used fibres in car interiors, with advantages and disadvantages it is presented the sustainable textile solutions for the automotive industry. The paper focuses in particular of the use of recycling of textile waste to highlight how the processes of recycled textiles and sustainable textiles production are linked in the automotive sector. A case study with Ford Motor Company outlines and examines their design, development and manufacture process for automotive textiles for car seat coverings and interiors

Learning and Celebrating: The Glamour of Design Lecture Series

Science.gov (United States)

Popov, Lubomir

2013-01-01

The purpose of this paper is to highlight the celebratory aspect of the Design Lecture Series, a tradition in architecture schools and interior design programs, its meaning for all constituent parties, and its contributions to creating professional identity and community. The Design Lecture Series is a public event popular in design programs,…

48 CFR 1415.406-70 - Department of the Interior price negotiation memorandum (PNM).

Science.gov (United States)

2010-10-01

... price negotiation memorandum (PNM). 1415.406-70 Section 1415.406-70 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 1415.406-70 Department of the Interior price negotiation memorandum (PNM). (a) Policy. In...

41 CFR 102-76.15 - What are design and construction services?

Science.gov (United States)

2010-07-01

... CONSTRUCTION Design and Construction § 102-76.15 What are design and construction services? Design and construction services are— (a) Site planning and landscape design; (b) Architectural and interior design; and... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What are design and...

Illumination of interior spaces by bended hollow light guides: Application of the theoretical light propagation method

Energy Technology Data Exchange (ETDEWEB)

Darula, Stanislav; Kocifaj, Miroslav; Kittler, Richard [ICA, Slovak Academy of Sciences, Bratislava (Slovakia); Kundracik, Frantisek [Department of Experimental Physics, FMPI, Comenius University, Bratislava (Slovakia)

2010-12-15

To ensure comfort and healthy conditions in interior spaces the thermal, acoustics and daylight factors of the environment have to be considered in the building design. Due to effective energy performance in buildings the new technology and applications also in daylight engineering are sought such as tubular light guides. These allow the transport of natural light into the building core reducing energy consumption. A lot of installations with various geometrical and optical properties can be applied in real buildings. The simplest set of tubular light guide consists of a transparent cupola, direct tube with high reflected inner surface and a ceiling cover or diffuser redistributing light into the interior. Such vertical tubular guide is often used on flat roofs. When the roof construction is inclined a bend in the light guide system has to be installed. In this case the cupola is set on the sloped roof which collects sunlight and skylight from the seen part of the sky hemisphere as well as that reflected from the ground and opposite facades. In comparison with the vertical tube some additional light losses and distortions of the propagated light have to be expected in bended tubular light guides. Recently the theoretical model of light propagation was already published and its applications are presented in this study solving illuminance distributions on the ceiling cover interface and further illuminance distribution on the working plane in the interior. (author)

Interior shadings for office indoor visual comfort in humid climate region

Science.gov (United States)

Dinapradipta, Asri; Sudarma, Erwin; Defiana, Ima; Erwindi, Collinthia

2018-03-01

As part of the fenestration system, the interior shadings have also a role to control the indoor environment to maintain indoor visual comfort. As the occupants have personal access to control these, their control behavior then, might enhance or even worsen indoor comfort performance. The controlling behavior might not only influence indoor comfort performance but can also indicate the success or failure of interior shading as a control device element. This paper is intended to report control behavior patterns, as represented by the variety of the slats’ openings of two types of interior shading i.e. Venetian and Vertical blinds and to analyze these on the concurrent impacts to indoor office building’s indoor illuminance and luminance distribution. The purpose of this research is to figure out the shading control patterns as well as to examine the effectiveness of these two types of interior shadings to control indoor visual environment. This study is a quantitative research using experimentation on the slats’ opening of two types of shadings at two identical office rooms. The research results suggested that both types of blinds seem unsuitable for gaining proper illumination values at work planes in humid tropics area. However, these shadings demonstrate good performance for luminance distribution except for that of the closed Venetian blinds.

Thermodynamic Effects of Replacements of Pro Residues in Helix Interiors of Maltose-Binding Protein

OpenAIRE

Prajapati, RS; Lingaraju, GM; Bacchawat, Kiran; Surolia, Avadhesha; Varadarajan, Raghavan

2003-01-01

Introduction of Pro residues into helix interiors results in protein destabilization. It is currently unclear if the converse substitution (i.e., replacement of Pro residues that naturally occur in helix interiors would be stabilizing). Maltose-binding protein is a large 370-amino acid protein that contains 21 Pro residues. Of these, three nonconserved residues (P48, P133, and P159) occur at helix interiors. Each of the residues was replaced with Ala and Ser. Stabilities were characterized by...

Lake Habitat and Fish Surveys on Interior Alaska National Wildlife Refuges, 1984–1986

Data.gov (United States)

Department of the Interior — A large-scale lake study on Interior Alaska National Wildlife Refuges (NWR) was undertaken from 1984–1986. Six NWRs were surveyed (Innoko, Kanuti, Koyukuk, Nowitna,...

Non-Interior Continuation Method for Solving the Monotone Semidefinite Complementarity Problem

International Nuclear Information System (INIS)

Huang, Z.H.; Han, J.

2003-01-01

Recently, Chen and Tseng extended non-interior continuation smoothing methods for solving linear/ nonlinear complementarity problems to semidefinite complementarity problems (SDCP). In this paper we propose a non-interior continuation method for solving the monotone SDCP based on the smoothed Fischer-Burmeister function, which is shown to be globally linearly and locally quadratically convergent under suitable assumptions. Our algorithm needs at most to solve a linear system of equations at each iteration. In addition, in our analysis on global linear convergence of the algorithm, we need not use the assumption that the Frechet derivative of the function involved in the SDCP is Lipschitz continuous. For non-interior continuation/ smoothing methods for solving the nonlinear complementarity problem, such an assumption has been used widely in the literature in order to achieve global linear convergence results of the algorithms

Effects of interior design on wellness: theory and recent scientific research.

Science.gov (United States)

Ulrich, R S

1991-01-01

To summarize briefly, key general points in this presentation include the following: To promote wellness, healthcare facilities should be designed to support patients in coping with stress. As general compass points for designers, scientific research suggests that healthcare environments will support coping with stress and promote wellness if they are designed to foster: 1. Sense of control; 2. Access to social support; 3. Access to positive distractions, and lack of exposure to negative distractions; A growing amount of scientific evidence suggests that nature elements or views can be effective as stress-reducing, positive distractions that promote wellness in healthcare environments. In considering the needs of different types of users of healthcare facilities--patients, visitors, staff--it should be kept in mind that these groups sometimes have conflicting needs or orientations with respect to control, social support, and positive distractions. It is important for designers to recognize such differing orientations as potential sources of conflict and stress in health facilities (Schumaker and Pequegnat, 1989). For instance, a receptionist in a waiting area may understandably wish to control the programs on a television that he or she is continuously exposed to; however, patients in the waiting area may experience some stress if they cannot select the programs or elect to turn off the television. Some staff may prefer bright, arousing art for corridors and patient rooms where they spend much of their time; however, for many patients, such art may increase rather than reduce stress. A difficult but important challenge for designers is to be sensitive to such group differences in orientations, and try to assess the gains or losses for one group vis-a-vis the other in attempting to achieve the goal of psychologically supportive design. Designers should also consider programs or strategies that combine or mesh different stress-reducing components. For example, it

The Stellar Imager (SI) Project: Resolving Stellar Surfaces, Interiors, and Magnetic Activity

Science.gov (United States)

Carpenter, Kenneth G.; Schrijver, K.; Karovska, M.

2007-01-01

The Stellar Imager (SI) is a UV/Optical. Space-Based Interferometer designed to enable 0.1 milli-arcsec (mas) spectral imaging of stellar surfaces and, via asteroseismology, stellar interiors and of the Universe in general. The ultra-sharp images of SI will revolutionize our view of many dynamic astrophysical processes by transforming point sources into extended sources, and snapshots into evolving views. The science of SI focuses on the role of magnetism in the Universe, particularly on magnetic activity on the surfaces of stars like the Sun. Its prime goal is to enable long-term forecasting of solar activity and the space weather that it drives. SI will also revolutionize our understanding of the formation of planetary systems, of the habitability and climatology of distant planets, and of many magneto-hydrodynamically controlled processes in the Universe. In this paper we discuss the science goals, technology needs, and baseline design of the SI mission.

Tenun Dan Penerapannya pada Desain Interior sebagai Warisan Budaya yang Memiliki Nilai Jual yang Tinggi

Directory of Open Access Journals (Sweden)

Grace Hartanti

2011-04-01

Full Text Available Weaving is one of the traditional fabric cultural arts of Indonesia produced in various regions across the archipelago (Sumatra, Kalimantan, Bali, Sulawesi, Lombok, Sumbawa, etc.. Weaving has a significance, historical value, and high technique both in terms of colors, patterns, materials and type of yarn used and each region has the characteristics of each. Weaving as one of high cultural heritage (Heritage is the pride of Indonesia which may reflect national identity. Therefore, weaving both in terms of production engineering, design and the resulting product should be maintained and preserved its existence, and promoted for reuse. One of them in the world of interior design can be used as an aesthetic element to promote local cultural elements (local content of Indonesia. 

Limitations and Constraints of Eddy-Current Loss Models for Interior Permanent-Magnet Motors with Fractional-Slot Concentrated Windings

Directory of Open Access Journals (Sweden)

Hui Zhang

2017-03-01

Full Text Available This paper analyzes and compares models for predicting average magnet losses in interior permanent-magnet motors with fractional-slot concentrated windings due to harmonics in the armature reaction (assuming sinusoidal phase currents. Particularly, loss models adopting different formulations and solutions to the Helmholtz equation to solve for the eddy currents are compared to a simpler model relying on an assumed eddy-current distribution. Boundaries in terms of magnet dimensions and angular frequency are identified (numerically and using an identified approximate analytical expression to aid the machine designer whether the more simple loss model is applicable or not. The assumption of a uniform flux-density variation (used in the loss models is also investigated for the case of V-shaped and straight interior permanent magnets. Finally, predicted volumetric loss densities are exemplified for combinations of slot and pole numbers common in automotive applications.

3D high-resolution radar imaging of small body interiors

Science.gov (United States)

Sava, Paul; Asphaug, Erik

2017-10-01

Answering fundamental questions about the origin and evolution of small planetary bodies hinges on our ability to image their interior structure in detail and at high resolution (Asphaug, 2009). We often infer internal structure from surface observations, e.g. that comet 67P/Churyumov-Gerasimenko is a primordial agglomeration of cometesimals (Massironi et al., 2015). However, the interior structure is not easily accessible without systematic imaging using, e.g., radar transmission and reflection data, as suggested by the CONSERT experiment on Rosetta. Interior imaging depends on observations from multiple viewpoints, as in medical tomography.We discuss radar imaging using methodology adapted from terrestrial exploration seismology (Sava et al., 2015). We primarily focus on full wavefield methods that facilitate high quality imaging of small body interiors characterized by complex structure and large contrasts of physical properties. We consider the case of a monostatic system (co-located transmitters and receivers) operated at two frequency bands, centered around 5 and 15 MHz, from a spacecraft in slow polar orbit around a spinning comet nucleus. Assuming that the spin period is significantly (e.g. 5x) faster than the orbital period, this configuration allows repeated views from multiple directions (Safaeinili et al., 2002)Using realistic numerical experiments, we argue that (1) the comet/asteroid imaging problem is intrinsically 3D and conventional SAR methodology does not satisfy imaging, sampling and resolution requirements; (2) imaging at different frequency bands can provide information about internal surfaces (through migration) and internal volumes (through tomography); (3) interior imaging can be accomplished progressively as data are being acquired through successive orbits around the studied object; (4) imaging resolution can go beyond the apparent radar frequency band by deconvolution of the point-spread-function characterizing the imaging system; and (5

Novel design for transparent high-pressure fuel injector nozzles

Science.gov (United States)

Falgout, Z.; Linne, M.

2016-08-01

The efficiency and emissions of internal combustion (IC) engines are closely tied to the formation of the combustible air-fuel mixture. Direct-injection engines have become more common due to their increased practical flexibility and efficiency, and sprays dominate mixture formation in these engines. Spray formation, or rather the transition from a cylindrical liquid jet to a field of isolated droplets, is not completely understood. However, it is known that nozzle orifice flow and cavitation have an important effect on the formation of fuel injector sprays, even if the exact details of this effect remain unknown. A number of studies in recent years have used injectors with optically transparent nozzles (OTN) to allow observation of the nozzle orifice flow. Our goal in this work is to design various OTN concepts that mimic the flow inside commercial injector nozzles, at realistic fuel pressures, and yet still allow access to the very near nozzle region of the spray so that interior flow structure can be correlated with primary breakup dynamics. This goal has not been achieved until now because interior structures can be very complex, and the most appropriate optical materials are brittle and easily fractured by realistic fuel pressures. An OTN design that achieves realistic injection pressures and grants visual access to the interior flow and spray formation will be explained in detail. The design uses an acrylic nozzle, which is ideal for imaging the interior flow. This nozzle is supported from the outside with sapphire clamps, which reduces tensile stresses in the nozzle and increases the nozzle's injection pressure capacity. An ensemble of nozzles were mechanically tested to prove this design concept.

A new nonlinear magnetic circuit model for dynamic analysis of interior permanent magnet synchronous motor

International Nuclear Information System (INIS)

Nakamura, Kenji; Saito, Kenichi; Watanabe, Tadaaki; Ichinokura, Osamu

2005-01-01

Interior permanent magnet synchronous motors (IPMSMs) have high efficiency and torque, since the motors can utilize reluctance torque in addition to magnet torque. The IPMSMs are widely used for electric household appliances and electric bicycles and vehicles. A quantitative analysis method of dynamic characteristics of the IPMSMs, however, has not been clarified fully. For optimum design, investigation of dynamic characteristics considering magnetic nonlinearity is needed. This paper presents a new nonlinear magnetic circuit model of an IPMSM, and suggests a dynamic analysis method using the proposed magnetic circuit model

Constraining Saturn's interior density profile from precision gravity field measurement obtained during Grand Finale

Science.gov (United States)

Movshovitz, N.; Fortney, J. J.; Helled, R.; Hubbard, W. B.; Mankovich, C.; Thorngren, D.; Wahl, S. M.; Militzer, B.; Durante, D.

2017-12-01

The external gravity field of a planetary body is determined by the distribution of mass in its interior. Therefore, a measurement of the external field, properlyinterpreted, tells us about the interior density profile, ρ(r), which in turn can be used to constrain the composition in the interior and thereby learn about theformation mechanism of the planet. Recently, very high precision measurements of the gravity coefficients for Saturn have been made by the radio science instrument on the Cassini spacecraft during its Grand Finale orbits. The resulting coefficients come with an associated uncertainty. The task of matching a given density profile to a given set of gravity coefficients is relatively straightforward, but the question of how to best account for the uncertainty is not. In essentially all prior work on matching models to gravity field data inferences about planetary structure have rested on assumptions regarding the imperfectly known H/He equation of state and the assumption of an adiabatic interior. Here we wish to vastly expand the phase space of such calculations. We present a framework for describing all the possible interior density structures of a Jovian planet constrained by a given set of gravity coefficients and their associated uncertainties. Our approach is statistical. We produce a random sample of ρ(a) curves drawn from the underlying (and unknown) probability distribution of all curves, where ρ is the density on an interior level surface with equatorial radius a. Since the resulting set of density curves is a random sample, that is, curves appear with frequency proportional to the likelihood of their being consistent with the measured gravity, we can compute probability distributions for any quantity that is a function of ρ, such as central pressure, oblateness, core mass and radius, etc. Our approach is also Bayesian, in that it can utilize any prior assumptions about the planet's interior, as necessary, without being overly

Building of Requirement: Liberating Academic Interior Architecture

Science.gov (United States)

McLane, Yelena; Dawkins, Jim

2014-01-01

The authors focus on the strategies employed in the recent renovation of the William Johnston Building at Florida State University, in which the historical exterior was preserved, while the interiors were adapted to new functions as classrooms, study centers, and common spaces with intentionally undefined purposes. The building's various use…

Calidad del aire interior en las escuelas

Science.gov (United States)

EPA ha desarrollado el Programa de Herramientas de Calidad del Aire Interior para las Escuelas para reducir la exposición a los contaminantes ambientales en las mismas a través de la adopción voluntaria de las prácticas para manejar la calidad del aire int

IS Design Pedagogy: A Special Ontology and Prospects for Curricula

Science.gov (United States)

Waguespack, Leslie J.

2016-01-01

Design as an academic endeavor has a rich history in the visual and performing arts as well as the "construction" arts: architectural, industrial, graphic, interior, fashion, and landscape design. Design in the natural and commercial sciences is largely peripheral. Although not ignored, design in the sciences predominates as a dialect of…

Pemaknaan Fungsi Dan Bentuk Pada Interior Restoran Dae Jang Geum YOGYAKARTA

OpenAIRE

Dodi Wondo, Graceshella Wijaya Mariana Wibowo

2013-01-01

Restaurant bussiness is one of the most developed and popular today, especially in big cities. Therefore, businesses are competing to attract the attention of the public, not only of the dishes served, but also the atmosphere and the interior of the restaurant is unique and interesting. One of the restaurant's interior that attracts attention is the Dae Jang Geum restaurant Yogyakarta, because the restaurant is adapting very interesting culture, the culture of Korea, in particular the form of...

Pemanfaatan Limbah Sabut Kelapa pada Perencanaan Interior dan Furniture yang Berdampak pada Pemberdayaan Masyarakat Miskin

Directory of Open Access Journals (Sweden)

Titi Indahyani

2011-04-01

Full Text Available Coconut coir is one component of coconut that could be produced and decomposed into products needed by domestic or international market. Cocofiber and cocopeat are two derived products from coconut coir which through several researches could be produced into supporting material of interior and furniture, including matrass, bed sofa, and particle board like MDF, Coconut Fiber Board (CFB. Within this research, it is hoped to distribute the information about the functions and producing materials from coconut coir waste. This is supposed to be used by the government, minor industry, designer, and public to also apply and choose environment-friendly coconus coir material and sustain as a part of sustainable design, green design, social entrepreneurship and related programs. Therefore, coconut coir waste could be valued economically and has its positive effects to society who live around the coconut tree plantation area.  

A trust region interior point algorithm for optimal power flow problems

Energy Technology Data Exchange (ETDEWEB)

Wang Min [Hefei University of Technology (China). Dept. of Electrical Engineering and Automation; Liu Shengsong [Jiangsu Electric Power Dispatching and Telecommunication Company (China). Dept. of Automation

2005-05-01

This paper presents a new algorithm that uses the trust region interior point method to solve nonlinear optimal power flow (OPF) problems. The OPF problem is solved by a primal/dual interior point method with multiple centrality corrections as a sequence of linearized trust region sub-problems. It is the trust region that controls the linear step size and ensures the validity of the linear model. The convergence of the algorithm is improved through the modification of the trust region sub-problem. Numerical results of standard IEEE systems and two realistic networks ranging in size from 14 to 662 buses are presented. The computational results show that the proposed algorithm is very effective to optimal power flow applications, and favors the successive linear programming (SLP) method. Comparison with the predictor/corrector primal/dual interior point (PCPDIP) method is also made to demonstrate the superiority of the multiple centrality corrections technique. (author)

Structural Acoustic Prediction and Interior Noise Control Technology

Science.gov (United States)

Mathur, G. P.; Chin, C. L.; Simpson, M. A.; Lee, J. T.; Palumbo, Daniel L. (Technical Monitor)

2001-01-01

This report documents the results of Task 14, "Structural Acoustic Prediction and Interior Noise Control Technology". The task was to evaluate the performance of tuned foam elements (termed Smart Foam) both analytically and experimentally. Results taken from a three-dimensional finite element model of an active, tuned foam element are presented. Measurements of sound absorption and sound transmission loss were taken using the model. These results agree well with published data. Experimental performance data were taken in Boeing's Interior Noise Test Facility where 12 smart foam elements were applied to a 757 sidewall. Several configurations were tested. Noise reductions of 5-10 dB were achieved over the 200-800 Hz bandwidth of the controller. Accelerometers mounted on the panel provided a good reference for the controller. Configurations with far-field error microphones outperformed near-field cases.

Evaluation of physical-protection elements for interior applications

International Nuclear Information System (INIS)

Scott, S.H.

1983-01-01

Considerable emphasis has been given in recent years to the threat of sabotage by an insider at nuclear facilities. This threat is inherently different from the outsider threat of theft or sabotage because of the insiders' unique knowledge and access to vital material and equipment. Thus, special safeguards elements are needed in order to counter the insider threat. In addition, insider physical protection system elements must be compatible with the operations, safety, and maintenance programs at the facility. To help identify elements which meet these needs, field evaluations were performed on an interior access control system, piping sensors, interior video motion detectors, and valve monitoring devices. These elements were tested in a realistic operating environment and both technical and operational evaluation data were obtained. Safeguards element descriptions and the results of the operational tests and evaluations are outlined

Optimization of actuator arrays for aircraft interior noise control

Science.gov (United States)

Cabell, R. H.; Lester, H. C.; Mathur, G. P.; Tran, B. N.

1993-01-01

A numerical procedure for grouping actuators in order to reduce the number of degrees of freedom in an active noise control system is evaluated using experimental data. Piezoceramic actuators for reducing aircraft interior noise are arranged into groups using a nonlinear optimization routine and clustering algorithm. An actuator group is created when two or more actuators are driven with the same control input. This procedure is suitable for active control applications where actuators are already mounted on a structure. The feasibility of this technique is demonstrated using measured data from the aft cabin of a Douglas DC-9 fuselage. The measured data include transfer functions between 34 piezoceramic actuators and 29 interior microphones and microphone responses due to the primary noise produced by external speakers. Control inputs for the grouped actuators were calculated so that a cost function, defined as a quadratic pressure term and a penalty term, was a minimum. The measured transfer functions and microphone responses are checked by comparing calculated noise reductions with measured noise reductions for four frequencies. The grouping procedure is then used to determine actuator groups that improve overall interior noise reductions by 5.3 to 15 dB, compared to the baseline experimental configuration.

SU-E-I-73: Clinical Evaluation of CT Image Reconstructed Using Interior Tomography

International Nuclear Information System (INIS)

Zhang, J; Ge, G; Winkler, M; Cong, W; Wang, G

2014-01-01

Purpose: Radiation dose reduction has been a long standing challenge in CT imaging of obese patients. Recent advances in interior tomography (reconstruction of an interior region of interest (ROI) from line integrals associated with only paths through the ROI) promise to achieve significant radiation dose reduction without compromising image quality. This study is to investigate the application of this technique in CT imaging through evaluating imaging quality reconstructed from patient data. Methods: Projection data were directly obtained from patients who had CT examinations in a Dual Source CT scanner (DSCT). Two detectors in a DSCT acquired projection data simultaneously. One detector provided projection data for full field of view (FOV, 50 cm) while another detectors provided truncated projection data for a FOV of 26 cm. Full FOV CT images were reconstructed using both filtered back projection and iterative algorithm; while interior tomography algorithm was implemented to reconstruct ROI images. For comparison reason, FBP was also used to reconstruct ROI images. Reconstructed CT images were evaluated by radiologists and compared with images from CT scanner. Results: The results show that the reconstructed ROI image was in excellent agreement with the truth inside the ROI, obtained from images from CT scanner, and the detailed features in the ROI were quantitatively accurate. Radiologists evaluation shows that CT images reconstructed with interior tomography met diagnosis requirements. Radiation dose may be reduced up to 50% using interior tomography, depending on patient size. Conclusion: This study shows that interior tomography can be readily employed in CT imaging for radiation dose reduction. It may be especially useful in imaging obese patients, whose subcutaneous tissue is less clinically relevant but may significantly increase radiation dose

Potential for forest products in interior Alaska.

Science.gov (United States)

George R. Sampson; Willem W.S. van Hees; Theodore S. Setzer; Richard C. Smith

1988-01-01

Future opportunities for producing Alaska forest products were examined from the perspective of timber supply as reported in timber inventory reports and past studies of forest products industry potential. The best prospects for increasing industrial production of forest products in interior Alaska are for softwood lumber. Current softwood lumber production in the...

The design of lighting

CERN Document Server

Tregenza, Peter

2013-01-01

This fully updated edition of the successful book The Design of Lighting, provides the lighting knowledge needed by the architect in practice, the interior designer and students of both disciplines. The new edition offers a clear structure, carefully selected material and linking of lighting with other subjects, in order to provide the reader with a comprehensive and specifically architectural approach to lighting. Features of this new edition include:technical knowledge of lighting in the context of architectural design;an emphasis on imagination in architectural light and presentation of the

Insert Tidal Here: Finding Stability of Galilean Satellite Interiors

Science.gov (United States)

Walker, M.; Bills, B. G.; Mitchell, J.; Rhoden, A.

2017-12-01

The tidal environment is often hypothesized as a cause of surface expression in the satellites of the outer solar system. In two notable cases, Io's volcanism is thought to be driven by tidal heating of its mantle while the shattered surface of Europa's ice shell is said to be generated by tidal stresses in that ice. Being adjacent moons of Jupiter, these satellites give us a unique opportunity to apply a single set of general coupled models at each body to predict how one model can predict the heat generation and flow, strain and stress states, and structural parameters for each body. We include the effects of interior evolution into the tidal environment in addition to an evolving orbit. We find that the interiors of Io and Europa will evolve, as a consequence of the heat transfer from interior to surface, and stable structural and heat flow conditions are found. Then as their orbits evolve, perturbed by the mutual interactions of the Laplace mean motion resonance, those conditions of structural and heat stability also change. In particular, we find that at current orbital conditions there is sufficient heat to completely melt Io models for which a convecting interior is capped by a conducting lid. This argues for the presence of a non dissipating (or barely dissipating) core below the mantle, which future Io structure models should include. For the Europa model at current orbit, we use a silicate interior under an ocean capped by a two layer ice; convecting below with a conducting surface. We find stability in heat and structure occurs when the lower ice melts and recedes until the shell is roughly 50km thick. We present a variety of plausible structures for these bodies, and track how the stability of those structures trend as the orbit (in particular the orbital eccentricity, mean motion, and obliquity) change. We show how the Love numbers, layer thicknesses, surface heat flow, and orbital parameters are all linked. For Europa, upcoming measurements from

The complexity of interior point methods for solving discounted turn-based stochastic games

DEFF Research Database (Denmark)

Hansen, Thomas Dueholm; Ibsen-Jensen, Rasmus

2013-01-01

for general 2TBSGs. This implies that a number of interior point methods can be used to solve 2TBSGs. We consider two such algorithms: the unified interior point method of Kojima, Megiddo, Noma, and Yoshise, and the interior point potential reduction algorithm of Kojima, Megiddo, and Ye. The algorithms run...... states and discount factor γ we get κ=Θ(n(1−γ)2) , −δ=Θ(n√1−γ) , and 1/θ=Θ(n(1−γ)2) in the worst case. The lower bounds for κ, − δ, and 1/θ are all obtained using the same family of deterministic games....

Cloning and characterization of chitinases from interior spruce and lodgepole pine.

Science.gov (United States)

Kolosova, N; Breuil, C; Bohlmann, J

2014-05-01

Chitinases have been implicated in the defence of conifers against insects and pathogens. cDNA for six chitinases were cloned from interior spruce (Picea glauca x engelmannii) and four from lodgepole pine (Pinus contorta). The cloned interior spruce chitinases were annotated class I PgeChia1-1 and PgeChia1-2, class II PgeChia2-1, class IV PgeChia4-1, and class VII PgeChia7-1 and PgeChia7-2; lodgepole pine chitinases were annotated class I PcChia1-1, class IV PcChia4-1, and class VII PcChia7-1 and PcChia7-2. Chitinases were expressed in Escherichia coli with maltose-binding-protein tags and soluble proteins purified. Functional characterization demonstrated chitinolytic activity for the three class I chitinases PgeChia1-1, PgeChia1-2 and PcChia1-1. Transcript analysis established strong induction of most of the tested chitinases, including all three class I chitinases, in interior spruce and lodgepole pine in response to inoculation with bark beetle associated fungi (Leptographium abietinum and Grosmannia clavigera) and in interior spruce in response to weevil (Pissodes strobi) feeding. Evidence of chitinolytic activity and inducibility by fungal and insect attack support the involvement of these chitinases in conifer defense. Copyright © 2014 Elsevier Ltd. All rights reserved.

CONVECTIVE BURSTS AND THE COUPLING OF SATURN'S EQUATORIAL STORMS AND INTERIOR ROTATION

International Nuclear Information System (INIS)

Heimpel, Moritz; Aurnou, Jonathan M.

2012-01-01

Temporal variations of Saturn's equatorial jet and magnetic field hint at rich dynamics coupling the atmosphere and the deep interior. However, it has been assumed that rotation of the interior dynamo must be steady over tens of years of modern observations. Here we use a numerical convection model and scaling estimates to show how equatorial convective bursts can transfer angular momentum to the deeper interior. The numerical model allows angular momentum transfer between a fluid outer spherical shell and a rigid inner sphere. Convection drives a prograde equatorial jet exhibiting quasiperiodic bursts that fill the equatorial volume outside the tangent cylinder. For each burst strong changes in the equatorial surface velocity are associated with retrograde torque on the inner sphere. Our results suggest that Saturn's Great White Spot, a giant storm that was observed to fill the equatorial region in 1990, could mobilize a volume of fluid carrying roughly 15% of Saturn's moment of inertia. Conservation of angular momentum then implies that a 20% change in the equatorial jet angular velocity could change the average interior rotation rate by about 0.1%—roughly an order of magnitude less than the apparent rotation rate changes associated with Saturn's kilometric radio (SKR) signal. However, if the SKR signal originates outside the liquid metal core in a 'planetary tachocline' that separates the layer of fast zonal flow from the magnetically controlled and slowly convecting deep interior, then convective bursts can provide a possible mechanism for the observed ∼1% SKR changes.

Remote metrology system (RMS) design concept

International Nuclear Information System (INIS)

1995-01-01

A 3D remote metrology system (RMS) is needed to map the interior plasma-facing components of the International Thermonuclear Experimental Reactor (ITER). The performance and survival of these components within the reactor vessel are strongly dependent on their precise alignment and positioning with respect to the plasma edge. Without proper positioning and alignment, plasma-facing surfaces will erode rapidly. A RMS design involving Coleman Research Corporation (CRC) fiber optic coherent laser radar (CLR) technology is examined in this study. The fiber optic CLR approach was selected because its high precision should be able to meet the ITER 0.1 mm accuracy requirement and because the CLR's fiber optic implementation allows a 3D scanner to operate remotely from the RMS system's vulnerable components. This design study has largely verified that a fiber optic CLR based RMS can survive the ITER environment and map the ITER interior at the required accuracy at a one measurement/cm 2 density with a total measurement time of less than one hour from each of six or more vertically deployed measurement probes. The design approach employs a sealed and pressurized measurement probe which is attached with an umbilical spiral bellows conduit. This conduit bears fiber optic and electronic links plus a stream of air to lower the temperature in the interior of the probe. Lowering the probe temperature is desirable because probe electromechanical components which could survive the radiation environment often were not rated for the 200 C temperature. The tip of the probe whose outer shell has a flexible bellows joint can swivel in two degrees of freedom to allow mapping operations at each probe deployment level. This design study has concluded that the most successful scanner design will involve a hybrid AO beam deflector and mechanical scanner

Remote metrology system (RMS) design concept

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-10-19

A 3D remote metrology system (RMS) is needed to map the interior plasma-facing components of the International Thermonuclear Experimental Reactor (ITER). The performance and survival of these components within the reactor vessel are strongly dependent on their precise alignment and positioning with respect to the plasma edge. Without proper positioning and alignment, plasma-facing surfaces will erode rapidly. A RMS design involving Coleman Research Corporation (CRC) fiber optic coherent laser radar (CLR) technology is examined in this study. The fiber optic CLR approach was selected because its high precision should be able to meet the ITER 0.1 mm accuracy requirement and because the CLR`s fiber optic implementation allows a 3D scanner to operate remotely from the RMS system`s vulnerable components. This design study has largely verified that a fiber optic CLR based RMS can survive the ITER environment and map the ITER interior at the required accuracy at a one measurement/cm{sup 2} density with a total measurement time of less than one hour from each of six or more vertically deployed measurement probes. The design approach employs a sealed and pressurized measurement probe which is attached with an umbilical spiral bellows conduit. This conduit bears fiber optic and electronic links plus a stream of air to lower the temperature in the interior of the probe. Lowering the probe temperature is desirable because probe electromechanical components which could survive the radiation environment often were not rated for the 200 C temperature. The tip of the probe whose outer shell has a flexible bellows joint can swivel in two degrees of freedom to allow mapping operations at each probe deployment level. This design study has concluded that the most successful scanner design will involve a hybrid AO beam deflector and mechanical scanner.

Climatology of the interior Columbia River basin.

Science.gov (United States)

Sue A. Ferguson

1999-01-01

This work describes climate means and trends in each of three major ecological zones and 13 ecological reporting units in the interior Columbia River basin. Widely differing climates help define each major zone and reporting unit, the pattern of which is controlled by three competing air masses: marine, continental, and arctic. Paleoclimatic evidence and historical...

A Cross-Cultural and Interdisciplinary Collaboration in a Joint Design Studio

Science.gov (United States)

Kim, Mi Jeong; Ju, Seo Ryeung; Lee, Lina

2015-01-01

A design studio is a critical venue for design students, as they are educated to develop design thinking and other skills through studio courses. This article introduces a design studio project in which Korean and Malaysian students worked jointly for one semester to design affordable urban housing. The Korean students were interior design majors…

Insectivorous Birds and Environmental Factors Across an Edge-Interior Gradient in Tropical Rainforest of Malaysia

OpenAIRE

Abdullah B. Mohd; Mohamed Zakaria; Hossein Varasteh Moradi; Ebil Yusof

2009-01-01

The study objectives were to test: (1) the effects of the edge-interior gradient on understorey insectivorous bird abundance, density and diversity; (2) effects of environmental variables along an edge-interior gradient at population level (i.e., on each sub-guilds and species abundance); (3) possible effects of environmental structure along an edge-interior gradient at community level (i.e., species richness, diversity and total abundance). Fifteen hundred and four birds belonging to ...

The Morris Nathanson Design Collection

Directory of Open Access Journals (Sweden)

Christopher Muller

2013-07-01

Full Text Available For more than a half century, Morris Nathanson has been at the forefront of creative interior design for the hospitality industry. He has nurtured, trained, and mentored scores of designers and project managers, while helping to launch the concept and brand development for dozens of landmark restaurant companies. Several images are reproduced from a vast collection of original drawings that have been donated to Boston University.

Improving the strength of additively manufactured objects via modified interior structure

Science.gov (United States)

Al, Can Mert; Yaman, Ulas

2017-10-01

Additive manufacturing (AM), in other words 3D printing, is becoming more common because of its crucial advantages such as geometric complexity, functional interior structures, etc. over traditional manufacturing methods. Especially, Fused Filament Fabrication (FFF) 3D printing technology is frequently used because of the fact that desktop variants of these types of printers are highly appropriate for different fields and are improving rapidly. In spite of the fact that there are significant advantages of AM, the strength of the parts fabricated with AM is still a major problem especially when plastic materials, such as Acrylonitrile butadiene styrene (ABS), Polylactic acid (PLA), Nylon, etc., are utilized. In this study, an alternative method is proposed in which the strength of AM fabricated parts is improved employing direct slicing approach. Traditional Computer Aided Manufacturing (CAM) software of 3D printers takes only the geometry as an input in triangular mesh form (stereolithography, STL file) generated by Computer Aided Design software. This file format includes data only about the outer boundaries of the geometry. Interior of the artifacts are manufactured with homogeneous infill patterns, such as diagonal, honeycomb, linear, etc. according to the paths generated in CAM software. The developed method within this study provides a way to fabricate parts with heterogeneous infill patterns by utilizing the stress field data obtained from a Finite Element Analysis software, such as ABAQUS. According to the performed tensile tests, the strength of the test specimen is improved by about 45% compared to the conventional way of 3D printing.

Dynamic light as a transformational tool in computer-aided design

DEFF Research Database (Denmark)

Hansen, Ellen Kathrine; Mullins, Michael Finbarr; Triantafyllidis, Georgios

2016-01-01

area close to the city center, from its traditional religious functions to a more dynamic, contemporary and multifunctional space, using light as the main design element. The initial question asked in this context is therefore ‘how light can transform the interior space of the de-sanctified church...... simulations of daylight and the smart-film diffuser were essential to study the design potentials of the double interior skin, appropriate to the three phases in the ceremonial space. 3. Transform. The findings from the experiments are transformed into a design solution using 3D models and simulations...... be applied to meet human biological, psychological and physiological needs. The implementation of these technologies transforms the functional split between engineers, technologists and architects into a complex transdisciplinary design process. A criterion for success of this endeavor will be, as Herbert...

Early warning signal for interior crises in excitable systems.

Science.gov (United States)

Karnatak, Rajat; Kantz, Holger; Bialonski, Stephan

2017-10-01

The ability to reliably predict critical transitions in dynamical systems is a long-standing goal of diverse scientific communities. Previous work focused on early warning signals related to local bifurcations (critical slowing down) and nonbifurcation-type transitions. We extend this toolbox and report on a characteristic scaling behavior (critical attractor growth) which is indicative of an impending global bifurcation, an interior crisis in excitable systems. We demonstrate our early warning signal in a conceptual climate model as well as in a model of coupled neurons known to exhibit extreme events. We observed critical attractor growth prior to interior crises of chaotic as well as strange-nonchaotic attractors. These observations promise to extend the classes of transitions that can be predicted via early warning signals.

Design and globalization can graphic design in mass communication inspire a global culture?

OpenAIRE

Nguyen, V. (V.); Prebys, C. (C.)

2010-01-01

In this paper I deliver four points which support my assertion that graphic design in mass communication can inspire a global culture informed by Christianity. First, I argue that the environment in which people consistently find themselves will over time influence and affect the interior dispositions of the person, and when occurring in great numbers, the culture. I argue for the importance of graphic design as a vital component in the development of culture and how as visual ...

Chronology of the cave interior sediments at Gran Dolina archaeological site, Atapuerca (Spain)

Science.gov (United States)

Parés, J. M.; Álvarez, C.; Sier, M.; Moreno, D.; Duval, M.; Woodhead, J. D.; Ortega, A. I.; Campaña, I.; Rosell, J.; Bermúdez de Castro, J. M.; Carbonell, E.

2018-04-01

The so-called "Gran Dolina site" (Atapuerca mountain range, N Spain) is a karstic cavity filled by sediments during the Pleistocene, some of which contain a rich ensemble of archaeological and paleontological records. These sediments have contributed significantly to our understanding of early human dispersal in Europe but, in contrast, older, interior facies deposits have received much less of attention. The stratigraphy of Gran Dolina reveals an abrupt sedimentary change of interior to entrance facies from bottom to top, reflecting a significant paleoenvironmental change that promoted the accumulation of sediments transported from the vicinity of the cave by water or "en masse". Since the major magnetic polarity reversal known as the Matuyama-Brunhes boundary (0.78 Ma) was detected within the TD7 unit in the middle of the stratigraphic section, we carried out a new combined paleomagnetic, radiometric (U-Pb), and electron spin resonance (ESR) dating study of the lower part of the sequence in order to constrain the chronology of the interior facies at Gran Dolina. U-Pb analysis of speleothems did not produce age information as the samples proved to be extremely unradiogenic. The magnetic stratigraphy of the cave interior sediments reveals a dominant reverse magnetic polarity, coherent with a Matuyama age, and interrupted by a normal polarity magnetozone interpreted as the Jaramillo Subchron (1.0-1.1 Ma). ESR ages on quartz grains from the upper part of the interior facies sediments are coherent with such an interpretation. We conclude that the fluvial deposits (interior facies) that constitute the cave floor began accumulating before 1.2 Ma. The development of large cave entrances at Gran Dolina occurred shortly after the Jaramillo Subchron but before ca 900 ka ago.

Strange distance: towards an anthropology of interior dialogue.

Science.gov (United States)

Irving, Andrew

2011-03-01

The capacity for a complex inner life--encompassing inner speech, imaginative reverie, and unarticulated moods--is an essential feature of living with illness and a principal means through which people interpret, understand, and manage their condition. Nevertheless, anthropology lacks a generally accepted theory or methodological framework for understanding how interiority relates to people's public actions and expressions. Moreover, as conventional social-scientific methods are often too static to understand the fluidity of perception among people living with illness or bodily instability, I argue we need to develop new, practical approaches to knowing. By placing the problem of interiority directly into the field and turning it into an ethnographic, practice-based question to be addressed through fieldwork in collaboration with informants, this article works alongside women living with HIV/AIDS in Uganda with the aim of capturing the unvoiced but sometimes radical changes in being, belief, and perception that accompany terminal illness.

Constraining the interior density profile of a Jovian planet from precision gravity field data

Science.gov (United States)

Movshovitz, Naor; Fortney, Jonathan J.; Helled, Ravit; Hubbard, William B.; Thorngren, Daniel; Mankovich, Chris; Wahl, Sean; Militzer, Burkhard; Durante, Daniele

2017-10-01

The external gravity field of a planetary body is determined by the distribution of mass in its interior. Therefore, a measurement of the external field, properly interpreted, tells us about the interior density profile, ρ(r), which in turn can be used to constrain the composition in the interior and thereby learn about the formation mechanism of the planet. Planetary gravity fields are usually described by the coefficients in an expansion of the gravitational potential. Recently, high precision measurements of these coefficients for Jupiter and Saturn have been made by the radio science instruments on the Juno and Cassini spacecraft, respectively.The resulting coefficients come with an associated uncertainty. And while the task of matching a given density profile with a given set of gravity coefficients is relatively straightforward, the question of how best to account for the uncertainty is not. In essentially all prior work on matching models to gravity field data, inferences about planetary structure have rested on imperfect knowledge of the H/He equation of state and on the assumption of an adiabatic interior. Here we wish to vastly expand the phase space of such calculations. We present a framework for describing all the possible interior density structures of a Jovian planet, constrained only by a given set of gravity coefficients and their associated uncertainties. Our approach is statistical. We produce a random sample of ρ(a) curves drawn from the underlying (and unknown) probability distribution of all curves, where ρ is the density on an interior level surface with equatorial radius a. Since the resulting set of density curves is a random sample, that is, curves appear with frequency proportional to the likelihood of their being consistent with the measured gravity, we can compute probability distributions for any quantity that is a function of ρ, such as central pressure, oblateness, core mass and radius, etc. Our approach is also bayesian, in that

Discussion on interior greening decoration of residence

Science.gov (United States)

Tong, ZhiNeng

2018-02-01

Green plants bring endless natural energy into the room. This paper introduces the functions, principles and functions of indoor greening decoration from different angles. Its conclusion is that it has become an important measure to improve the living environment of the people, and through the interior greening decoration to create a harmonious living space of architecture, human and nature.

Cross-Cultural Socialization at Tibetan Classes (Schools) in the Interior: An Empirical Analysis

Science.gov (United States)

Guo, Longyan

2010-01-01

Education by means of the Tibetan Classes (schools) in "neidi," or China's interior regions (or the Tibet Class), was a creative measure in the history of China's ethnic minority education, and the cross-cultural growth and experiences of the Tibetan students as they went to school in China's interior regions was of special significance…

MnO{sub 2}@colloid carbon spheres nanocomposites with tunable interior architecture for supercapacitors

Energy Technology Data Exchange (ETDEWEB)

Zhang, Yuxin, E-mail: zhangyuxin@cqu.edu.cn [College of Materials Science and Engineering, Chongqing University, Chongqing 400044 (China); National Key Laboratory of Fundamental Science of Micro/Nano-Devices and System Technology, Chongqing University, Chongqing 400044 (China); Dong, Meng; Zhu, Shijin [College of Materials Science and Engineering, Chongqing University, Chongqing 400044 (China); Liu, Chuanpu, E-mail: liuchuanpu@163.com [College of Materials Science and Engineering, Chongqing University, Chongqing 400044 (China); Wen, Zhongquan [National Key Laboratory of Fundamental Science of Micro/Nano-Devices and System Technology, Chongqing University, Chongqing 400044 (China)

2014-01-01

Graphical abstract: - Highlights: • MnO{sub 2}@CSs nanocomposites have been successfully synthesized in room temperature. • The composites exhibited three structures: core–shell, yolk–shell and hollow structure. • The yolk–shell structure exhibited a high specific capacitance and cycling stability. - Abstract: MnO{sub 2}@colloid carbon spheres nanocomposites with tunable interior architecture have been synthesized by a facile and cost-effective strategy at room temperature. The structure and morphology of as-prepared nanocomposites were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), nitrogen adsorption, focused ion beam scanning electron microscopy (FIB/SEM) and high-resolution transmission electron microscopy (HRTEM). The as-obtained composites exhibited a three-dimensional architecture with core–shell, yolk–shell and hollow interior structure. Furthermore, the electrochemical properties of composites were evaluated by cycle voltammetric (CV) and galvanostatic charge–discharge measurements. The yolk–shell structure exhibited the optimized pseudocapacitance performance, revealing a specific capacitance (273 F g{sup −1}) with a good rate and cycling stability, owing to its unique structure and the poor crystallinity of MnO{sub 2} nanofilms. Therefore, this facile synthetic strategy could be useful to design and synthesis of tunable nanostructures with enhanced supercapacitor behavior.

The Stellar Imager (SI) - A Mission to Resolve Stellar Surfaces, Interiors, and Magnetic Activity

International Nuclear Information System (INIS)

Christensen-Dalsgaard, Joergen; Carpenter, Kenneth G; Schrijver, Carolus J; Karovska, Margarita

2011-01-01

The Stellar Imager (SI) is a space-based, UV/Optical Interferometer (UVOI) designed to enable 0.1 milli-arcsecond (mas) spectral imaging of stellar surfaces and of the Universe in general. It will also probe via asteroseismology flows and structures in stellar interiors. SI will enable the development and testing of a predictive dynamo model for the Sun, by observing patterns of surface activity and imaging of the structure and differential rotation of stellar interiors in a population study of Sun-like stars to determine the dependence of dynamo action on mass, internal structure and flows, and time. SI's science focuses on the role of magnetism in the Universe and will revolutionize our understanding of the formation of planetary systems, of the habitability and climatology of distant planets, and of many magneto-hydrodynamically controlled processes in the Universe. SI is a 'Landmark/Discovery Mission' in the 2005 Heliophysics Roadmap, an implementation of the UVOI in the 2006 Astrophysics Strategic Plan, and a NASA Vision Mission ('NASA Space Science Vision Missions' (2008), ed. M. Allen). We present here the science goals of the SI Mission, a mission architecture that could meet those goals, and the technology development needed to enable this mission. Additional information on SI can be found at: http://hires.gsfc.nasa.gov/si/.

The Stellar Imager (SI) - A Mission to Resolve Stellar Surfaces, Interiors, and Magnetic Activity

Science.gov (United States)

Christensen-Dalsgaard, Jørgen; Carpenter, Kenneth G.; Schrijver, Carolus J.; Karovska, Margarita; Si Team

2011-01-01

The Stellar Imager (SI) is a space-based, UV/Optical Interferometer (UVOI) designed to enable 0.1 milli-arcsecond (mas) spectral imaging of stellar surfaces and of the Universe in general. It will also probe via asteroseismology flows and structures in stellar interiors. SI will enable the development and testing of a predictive dynamo model for the Sun, by observing patterns of surface activity and imaging of the structure and differential rotation of stellar interiors in a population study of Sun-like stars to determine the dependence of dynamo action on mass, internal structure and flows, and time. SI's science focuses on the role of magnetism in the Universe and will revolutionize our understanding of the formation of planetary systems, of the habitability and climatology of distant planets, and of many magneto-hydrodynamically controlled processes in the Universe. SI is a "Landmark/Discovery Mission" in the 2005 Heliophysics Roadmap, an implementation of the UVOI in the 2006 Astrophysics Strategic Plan, and a NASA Vision Mission ("NASA Space Science Vision Missions" (2008), ed. M. Allen). We present here the science goals of the SI Mission, a mission architecture that could meet those goals, and the technology development needed to enable this mission. Additional information on SI can be found at: http://hires.gsfc.nasa.gov/si/.

The Stellar Imager (SI) - A Mission to Resolve Stellar Surfaces, Interiors, and Magnetic Activity

Science.gov (United States)

Christensen-Dalsgaard, Jorgen; Carpenter, Kenneth G.; Schrijver, Carolus J.; Karovska, Margarita

2012-01-01

The Stellar Imager (SI) is a space-based, UV/Optical Interferometer (UVOI) designed to enable 0.1 milli-arcsecond (mas) spectral imaging of stellar surfaces and of the Universe in general. It will also probe via asteroseismology flows and structures in stellar interiors. SI will enable the development and testing of a predictive dynamo model for the Sun, by observing patterns of surface activity and imaging of the structure and differential rotation of stellar interiors in a population study of Sun-like stars to determine the dependence of dynamo action on mass, internal structure and flows, and time. SI's science focuses on the role of magnetism in the Universe and will revolutionize our understanding of the formation of planetary systems, of the habitability and climatology of distant planets, and of many magnetohydrodynamically controlled processes in the Universe. SI is a "LandmarklDiscovery Mission" in the 2005 Heliophysics Roadmap, an implementation of the UVOI in the 2006 Astrophysics Strategic Plan, and a NASA Vision Mission ("NASA Space Science Vision Missions" (2008), ed. M. Allen). We present here the science goals of the SI Mission, a mission architecture that could meet those goals, and the technology development needed to enable this mission

Mechatronics Design of an Autonomous Pipe-Inspection Robot

Directory of Open Access Journals (Sweden)

Abdellatif Mohamed

2018-01-01

Full Text Available Pipelines require periodical inspection to detect corrosion, deformation and congestion with obstacles in the network. Autonomous mobile robots are good solutions for this task. Visual information from the pipe interior associated with a location stamp is needed for inspection. In this paper, the previous designs of autonomous robots are reviewed and a new robot is developed to ensure simple design and smooth motion. Images are processed online to detect irregularity in pipe and then start capturing high resolution pictures to conserve the limited memory size. The new robot moves in pipes and provides video stream of pipe interior with location stamp. The visual information can later be processed offline to extract more information of pipeline condition to make maintenance decisions.

A New Wave of Permafrost Warming in the Alaskan Interior?

Science.gov (United States)

Romanovsky, V. E.; Nicolsky, D.; Cable, W.; Kholodov, A. L.; Panda, S. K.

2017-12-01

The impact of climate warming on permafrost and the potential of climate feedbacks resulting from permafrost thawing have recently received a great deal of attention. Ground temperatures are a primary indicator of permafrost stability. Many of the research sites in our permafrost network are located along the North American Arctic Permafrost-Ecological Transect that spans all permafrost zones in Alaska. Most of the sites in Alaska show substantial warming of permafrost since the 1980s. The magnitude of warming has varied with location, but was typically from 0.5 to 3°C. However, this warming was not linear in time and not spatially uniform. In some regions this warming even may be reversed and a slight recent cooling of permafrost has been observed recently at some locations. The Interior of Alaska is one of such regions where a slight permafrost cooling was observed starting in the late 1990s that has continued through the 2000s and in the beginning of the 2010s. The cooling has followed the substantial increase in permafrost temperatures documented for the Interior during the 1980s and 1990s. Permafrost temperatures at 15 m depth increased here by 0.3 to 0.6°C between 1983 and 1996. In most locations they reached their maximum in the second half of the 1990s. Since then, the permafrost temperatures started to decrease slowly and by 2013 this decrease at some locations was as much as 0.3°C at 15 m depth. There are some indications that the warming trend in the Alaskan Interior permafrost resumed during the last four years. By 2016, new record highs for the entire period of measurements of permafrost temperatures at 15 m depth were recorded at several locations. The latest observed permafrost warming in the Interior was combined with higher than normal summer precipitations. This combination has triggered near-surface permafrost degradation in many locations with adverse consequences for the ground surface stability affecting ecosystems and infrastructure. In

Modelling of the inhomogeneous interior of polymer gels

International Nuclear Information System (INIS)

Shew, C-Y; Iwaki, Takafumi

2006-01-01

A simple model has been investigated to elucidate the mean squared displacement (MSD) of probe molecules in cross-linked polymer gels. In the model, we assume that numerous cavities distribute in the inhomogeneous interior of a gel, and probe molecules are confined within these cavities. The individual probe molecules trapped in a gel are treated as Brownian particles confined to a spherical harmonic potential. The harmonic potential is chosen to model the effective potential experienced by the probe particle in the cavity of a gel. Each field strength is corresponding to the characteristic of one type of effective cavity. Since the statistical distribution of different effective cavity sizes is unknown, several distribution functions are examined. Meanwhile, the calculated averaged MSDs are compared to the experimental data by Nisato et al (2000 Phys. Rev. E 61 2879). We find that the theoretical results of the MSD are sensitive to the shape of the distribution function. For low cross-linked gels, the best fit is obtained when the interior cavities of a gel follow a bimodal distribution. Such a result may be attributed to the presence of at least two distinct classes of cavity in gels. For high cross-linked gels, the cavities in the gel can be depicted by a single-modal uniform distribution function, suggesting that the range of cavity sizes becomes smaller. These results manifest the voids inside a gel, and the shape of distribution functions may provide the insight into the inhomogeneous interior of a gel

Evolution of Asian Interior Arid-Zone Biota: Evidence from the Diversification of Asian Zygophyllum (Zygophyllaceae)

Science.gov (United States)

Li, Hong-Lei; Yu, Sheng-Xiang; Zhang, Lin-Jing; Wang, Wei

2015-01-01

The Asian interior arid zone is the largest desert landform system in the Northern Hemisphere, and has high biodiversity. Little is currently known about the evolutionary history of its biota. In this study, we used Zygophyllum, an important and characteristic component of the Asian interior arid zone, to provide new insights into the evolution of this biota. By greatly enlarged taxon sampling, we present the phylogenetic analysis of Asian Zygophyllum based on two plastid and one nuclear markers. Our phylogenetic analyses indicate that Asian Zygophyllum and Sarcozygium form a clade and Sarcozygium is further embedded within the shrub subclade. An integration of phylogenetic, biogeographic, and molecular dating methods indicates that Zygophyllum successfully colonized the Asian interior from Africa in the early Oligocene, and Asian Zygophyllum became differentiated in the early Miocene and underwent a burst of diversification in the late Miocene associated with the expansion of Asian interior arid lands due to orogenetic and climatic changes. Combining diversification patterns of other important components of the Asian interior arid zone, we propose a multi-stage evolution model for this biota: the late Eocene–early Oligocene origin, the early Miocene expansion, and the middle-late Miocene rapid expansion to the whole Asian interior arid zone. This study also demonstrates that, for Zygophyllum and perhaps other arid-adapted organisms, arid biomes are evolutionary cradles of diversity. PMID:26393796

Transient simulation in interior flow field of lobe pump

International Nuclear Information System (INIS)

Li, Y B; Sang, X H; Shen, H; Jia, K; Meng, Q W

2013-01-01

The subject of this paper is mainly focused on the development and control of the double folium and trifolium lobe pump profiles by using the principle of involute engagement and use CAD to get an accurate involute profile. We use the standard k-ε turbulence model and PISO algorithm based on CFD software FLUENT. The dynamic mesh and UDF technology is introduced to simulate the interior flow field inside a lobe pump, and the variation of interior flow field under the condition of the lobe rotating is analyzed. We also analyse the influence produced by the difference in lobes, and then reveal which lobe is best. The results show that dynamic variation of the interior flow field is easily obtained by dynamic mesh technology and the distribution of its pressure and velocity. Because of the small gaps existing between the rotors and pump case, the higher pressure area will flow into the lower area though the small gaps which cause the working area keep with higher pressure all the time. Both of the double folium and trifolium are existing the vortex during the rotting time and its position, size and shape changes all the time. The vortexes even disappear in a circle period and there are more vortexes in double folium lobe pump. The velocity and pressure pulsation of trifolium pump are lower than that of the double folium

Conference on Boundary and Interior Layers : Computational and Asymptotic Methods

CERN Document Server

2015-01-01

This volume offers contributions reflecting a selection of the lectures presented at the international conference BAIL 2014, which was held from 15th to 19th September 2014 at the Charles University in Prague, Czech Republic. These are devoted to the theoretical and/or numerical analysis of problems involving boundary and interior layers and methods for solving these problems numerically. The authors are both mathematicians (pure and applied) and engineers, and bring together a large number of interesting ideas. The wide variety of topics treated in the contributions provides an excellent overview of current research into the theory and numerical solution of problems involving boundary and interior layers.  .

A hybrid SEA/modal technique for modeling structural-acoustic interior noise in rotorcraft.

Science.gov (United States)

Jayachandran, V; Bonilha, M W

2003-03-01

This paper describes a hybrid technique that combines Statistical Energy Analysis (SEA) predictions for structural vibration with acoustic modal summation techniques to predict interior noise levels in rotorcraft. The method was applied for predicting the sound field inside a mock-up of the interior panel system of the Sikorsky S-92 helicopter. The vibration amplitudes of the frame and panel systems were predicted using a detailed SEA model and these were used as inputs to the model of the interior acoustic space. The spatial distribution of the vibration field on individual panels, and their coupling to the acoustic space were modeled using stochastic techniques. Leakage and nonresonant transmission components were accounted for using space-averaged values obtained from a SEA model of the complete structural-acoustic system. Since the cabin geometry was quite simple, the modeling of the interior acoustic space was performed using a standard modal summation technique. Sound pressure levels predicted by this approach at specific microphone locations were compared with measured data. Agreement within 3 dB in one-third octave bands above 40 Hz was observed. A large discrepancy in the one-third octave band in which the first acoustic mode is resonant (31.5 Hz) was observed. Reasons for such a discrepancy are discussed in the paper. The developed technique provides a method for modeling helicopter cabin interior noise in the frequency mid-range where neither FEA nor SEA is individually effective or accurate.

Deep Interior: Probing the Structure of Primitive Bodies

Science.gov (United States)

Asphaug, Erik; Scheeres, Daniel; Safaeinili, Ali

Deep Interior is a mature Discovery-class mission concept focused on probing the geophysical behavior of primitive bodies, from the mechanics of their exterior materials to the structures of their interiors. Its theme is to discover how small bodies work - to learn the natural origin and evolution of asteroids, comets and other primitive bodies through radar reflection tomography and through detailed observations of the local and global effects of cratering. Learning the structure and mechanical response of asteroids and comets is also a precursor to resource utilization and hazardous asteroid mitigation. Overall the mission is aligned with NASA strategic sub-goal 3C, to advance scientific knowledge of the origin and history of the solar system ... and the hazards and resources present as humans explore space. Deep Interior deploys no complex landers or sub-spacecraft; the scientific instruments are a radar and a camera. A blast cratering experiments triggered by grenades leads to a low cost seismological investigation which complements the radar investigation. A desired addition is an imaging spectrometer. The science instruments are high heritage, as are the navigation techniques for orbiting and station-keeping. The mission conducts the following investigations at one or more asteroids: Radar Reflection Tomography (RRT). The first science phase is to operate a penetrating radar during each several-month rendezvous, deployed in reflection mode in the manner of ongoing radar investigations underway by Mars Express, Mars Reconnaissance Orbiter, and Kaguya. The RRT technique (Safaeinili et al., MAPS 2002) is analogous to performing a "CAT scan" from orbit: closely sampled radar echoes are processed to yield volumetric maps of mechanical and compositional boundaries, and to measure interior dielectric properties. Deep Interior utilizes a polar orbit (or station keeping) while the asteroid spins underneath; the result is to "peel the apple" with thousands of unique

Investigation of interior post-insulated masonry walls with wooden beam ends

DEFF Research Database (Denmark)

Morelli, Martin; Svendsen, Svend

2013-01-01

The preponderant number of multistorey buildings constructed in Denmark in the period between 1850 and 1930 were built with masonry walls incorporating wooden floor beams. Given the nature of this construction, it is supposed that significant energy savings could be achieved by simply insulating...... the facades of such buildings. To maintain the exterior appearance of the facade, the only possible means of installing the required insulation is placing it on the interior of the wall. However, the installation of insulation on the interior of the wall assembly reduces the overall drying potential...

Interior Point Methods on GPU with application to Model Predictive Control

DEFF Research Database (Denmark)

Gade-Nielsen, Nicolai Fog

The goal of this thesis is to investigate the application of interior point methods to solve dynamical optimization problems, using a graphical processing unit (GPU) with a focus on problems arising in Model Predictice Control (MPC). Multi-core processors have been available for over ten years now...... software package called GPUOPT, available under the non-restrictive MIT license. GPUOPT includes includes a primal-dual interior-point method, which supports both the CPU and the GPU. It is implemented as multiple components, where the matrix operations and solver for the Newton directions is separated...

Loving Nature From the Inside Out: A Biophilia Matrix Identification Strategy for Designers.

Science.gov (United States)

McGee, Beth; Marshall-Baker, Anna

2015-01-01

The development of the Biophilic Design Matrix (BDM) was to aid designers or other specialists in identifying and quantifying biophilic features through a visual inventory of interior spaces. With mounting evidence to support the healing attributes of biophilic environments, we propose a method to identify biophilic content within interior spaces. Such a strategy offers much promise to the advancement of restorative environments. The BDM was based on Stephen Kellert's biophilic design attribute list and modified to be appropriate for interior environments, specifically children's healthcare spaces. A photo-ethnographic documentation method of 24 child life play spaces within a South Atlantic state was used to determine whether the BDM could reliably reveal biophilic features (listed as attributes by Kellert in 2008). This matrix appears useful in documenting biophilia within the pediatric healthcare context, attesting to the usability and functionality of the BDM for this special population. Specifically, the BDM revealed that biophilic attributes were constantly present in some spaces while others were completely absent. When a biophilic attribute was present, the BDM indicated that they varied considerably in type and occurrence. Thus, use of the BDM in the hospital areas designed for patient recreation and play successfully provided a visual inventory of biophilic features as well as the frequency of application. Further use of the BDM as a tool for strategizing biophilic feature inclusion can thus increase the connections available with nature in the interior, beneficial for optimizing health and wellness. © The Author(s) 2015.

Pengaruh Lebar Fasad, Warna Interior, dan Lokasi Meja Kasir terhadap Persepsi Aman dan Sikap Konsumen pada Convenience Store

Directory of Open Access Journals (Sweden)

Imtihan Hanum

2016-12-01

experiment for this study 43 respondents were used to evaluate a stimulus set consisting of simulated images of a convenience store interior. The response data were analyzed using ANOVA. The experiment results showed that a cashier location far from the exit with a cool color combination is deemed secure by the respondents, while the location of a counter away from the exit has a positive effect on client behavior. However, the façade variable did not contribute significantly to improving security perception and client behavior. The experimental results can be used in convenience store design guidelines and for developing design knowledge. In the future, other types of shops or public spaces with similar problems can be studied.Keywords: convenience store; crime prevention; consumer behavior; security perception.

Non-static vacuum strings: exterior and interior solutions

International Nuclear Information System (INIS)

Stein-Schabes, J.A.

1986-01-01

New non-static cylindrically symmetric solutions of Einsteins's equations are presented. Some of these solutions represent string-like objects. An exterior vacuum solution is matched to a non-vacuum interior solution for different forms of the energy-momentum tensor. They generalize the standard static string. 12 refs

Physics of neutron star interiors

International Nuclear Information System (INIS)

Blaschke, D.

2001-01-01

Neutron stars are the densest observable bodies in our universe. Born during the gravitational collapse of luminous stars - a birth heralded by spectacular supernova explosions - they open a window on a world where the state of the matter and the strength of the fields are anything but ordinary. This book is a collection of pedagogical lectures on the theory of neutron stars, and especially their interiors, at the forefront of current research. It adresses graduate students and researchers alike, and should be particularly suitable as a text bridging the gap between standard textbook material and the research literature

Practical Recommendations for the Preliminary Design Analysis of ...

African Journals Online (AJOL)

Interior-to-exterior shear ratios for equal and unequal bay frames, as well as column inflection points were obtained to serve as practical aids for preliminary analysis/design of fixed-feet multistory sway frames. Equal and unequal bay five story frames were analysed to show the validity of the recommended design ...